Improvements of reinforced silica aerogel nanocomposites thermal properties for architecture applications.

PubMed

Saboktakin, Amin; Saboktakin, Mohammad Reza

2015-01-01

An 1,4-cis polybutadiene rubber/carboxymethyl starch (CMS)-based silica aerogel nanocomposites as a insulation material was developed that will provide superior thermal insulation properties, flexibility, toughness, durability of the parent polymer, yet with the low density and superior insulation properties associated with the aerogels. In this study, reinforced 1,4-cis polybutadiene-CMS-silica aerogel nanocomposites were prepared from a silica aerogel with a surface area 710 m(2) g(-1), a pore size of 25.3 nm and a pore volume of 4.7 cm(3) g(-1). The tensile properties and dynamic mechanical properties of 1,4-cis polybutadiene/CMS nanocomposites were systematically enhanced at low silica loading. Similar improvements in tensile modulus and strength have been observed for 1,4-cis polybutadiene/CMS mesoporous silica aerogel nanocomposites. Copyright © 2014 Elsevier B.V. All rights reserved.

Infrared microspectroscopic study of the thermo-oxidative degradation of hydroxy-terminated polybutadiene/isophorone diisocyanate polyurethane rubber

DOE PAGES

Nagle, Dylan J.; Celina, Mathew; Rintoul, Llewellyn; ...

2007-05-21

In this work, hydroxy-terminated polybutadiene/isophorone diisocyanate (HTPB/IPDI) polyurethane rubber which was aged in air at elevated temperatures has been studied by infrared microspectroscopy. Spectra were collected in transmission mode on microtomed samples. Analysis of sets of spectra taken across the sectioned material showed that most of the degradation occurred in the polybutadiene part of the polymer and that the urethane linkage was essentially unchanged. The trans isomer of the polybutadiene appears to be preferentially degraded compared with the vinyl isomer. The IR technique does not provide significant information about the cis isomer. The IR spectra indicated that likely degradation productsmore » included acids, esters, alcohols, and small amounts of other products containing a carbonyl functional group. Band area ratios, supported by a principal components analysis, were used to derive degradation profiles for the material. Lastly, these profiles were steep-sided indicating an oxygen diffusion limited process.« less

Master curve captures the effect of domain morphology on ethanol pervaporation through block copolymer membranes

USDA-ARS?s Scientific Manuscript database

We report on the effect of changing nanoscale morphology on pervaporation of ethanol/water mixtures through block copolymer membranes. Experiments were conducted using polystyrene-b-polybutadiene-b-polystyrene (SBS) copolymers with polybutadiene (PB) as the ethanol transporting block, using an 8 wt%...

Structure and Mechanical Properties of Polybutadiene Thin Films Bound to Surface-Modified Carbon Interface.

PubMed

Hori, Koichiro; Yamada, Norifumi L; Fujii, Yoshihisa; Masui, Tomomi; Kishimoto, Hiroyuki; Seto, Hideki

2017-09-12

The structure and mechanical properties of polybutadiene (PB) films on bare and surface-modified carbon films were examined. There was an interfacial layer of PB near the carbon layer whose density was higher (lower) than that of the bulk material on the hydrophobic (hydrophilic) carbon surface. To glean information about the structure and mechanical properties of PB at the carbon interface, a residual layer (RL) adhering to the carbon surface, which was considered to be a model of "bound rubber layer", was obtained by rinsing the PB film with toluene. The density and thickness of the RLs were identical to those of the interfacial layer of the PB film. In accordance with the change in the density, normal stress of the RLs evaluated by atomic force microscopy was also dependent on the surface free energy: the RLs on the hydrophobic carbon were hard like glass, whereas those on the hydrophilic carbon were soft like rubber. Similarly, the wear test revealed that the RLs on the hydrophilic carbon could be peeled off by scratching under a certain stress, whereas the RLs on the hydrophobic carbons were resistant to scratching.

40 CFR 63.494 - Back-end process provisions-residual organic HAP and emission limitations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... produced by the emulsion process, polybutadiene rubber and styrene butadiene rubber produced by the... styrene butadiene rubber produced by the emulsion process: (i) A monthly weighted average of 0.40 kg... than a solution or emulsion process, polybutadiene rubber produced by any process other than a solution...

Synthesis and characterization of chitosan/curcumin blends based polyurethanes.

PubMed

Zia, Fatima; Zia, Khalid Mahmood; Zuber, Mohammad; Rehman, Saima; Tabasum, Shazia; Sultana, Salma

2016-11-01

In this work, new hexamethylene diisocyanate (HMDI) and hyroxylterminated polybutadiene (HTPB) based polyurethanes (PUs) were prepared following step growth polymerization by the introduction of varying mole ratio of chitosan (CH) and curcumin (CUR). Structural study of blends through infrared spectroscopy confirmed the incorporation of CH and CUR into the backbone of the PU. The scanning electron microscopic (SEM) study confirmed the well dispersion of incorporated chitosan/curcumin and homogeneity of surface of synthesized samples. Thermogravimetric analysis (TGA) of PU blends indicated a better thermal stability with 0.25M:0.75M of chitosan to curcumin. Mechanical properties such as modulus and tensile strength of PU blends were found to be better with higher contents of chitosan and curcumin. The same extender composition (1mol BDO, 075mol chitosan and 0.25mol curcumin) based PU showed higher substantial of antimicrobial activity as compared to the all other PUs. On the whole, this work is actually a step towards the generation of novel biocompatible materials preferably useful for biomedical applications. Copyright © 2016 Elsevier B.V. All rights reserved.

Molecular dynamics simulations of shock waves in hydroxyl-terminated polybutadiene melts: Mechanical and structural responses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fröhlich, Markus G., E-mail: FroehlichM@missouri.edu, E-mail: ThompsonDon@missouri.edu; Sewell, Thomas D., E-mail: SewellT@missouri.edu; Thompson, Donald L., E-mail: FroehlichM@missouri.edu, E-mail: ThompsonDon@missouri.edu

2014-01-14

The mechanical and structural responses of hydroxyl-terminated cis-1,4-polybutadiene melts to shock waves were investigated by means of all-atom non-reactive molecular dynamics simulations. The simulations were performed using the OPLS-AA force field but with the standard 12-6 Lennard-Jones potential replaced by the Buckingham exponential-6 potential to better represent the interactions at high compression. Monodisperse systems containing 64, 128, and 256 backbone carbon atoms were studied. Supported shock waves were generated by impacting the samples onto stationary pistons at impact velocities of 1.0, 1.5, 2.0, and 2.5 km s{sup −1}, yielding shock pressures between approximately 2.8 GPa and 12.5 GPa. Single-molecule structuralmore » properties (squared radii of gyration, asphericity parameters, and orientational order parameters) and mechanical properties (density, shock pressure, shock temperature, and shear stress) were analyzed using a geometric binning scheme to obtain spatio-temporal resolution in the reference frame centered on the shock front. Our results indicate that while shear stress behind the shock front is relieved on a ∼0.5 ps time scale, a shock-induced transition to a glass-like state occurs with a concomitant increase of structural relaxation times by several orders of magnitude.« less

Chemical Propulsion Information Agency Bulletin, Volume 24, No. 2

DTIC Science & Technology

1998-03-01

NASA in 1960 (CTPB), or hydroxyl-terminated polybutadiene ( HTPB ). Repre- and 1961. Subsequently, UT-CSD developed and produced the 5- sentative data...March 1998 Page 5 Polybutadienes Dominate... continued from page 5 Although Aerojet reportedly investigated HTPB propellants in been the Titan IV...Vehicle (EELV) range, HTPBs were viewed as serious contenders for tactical adopting all-liquid propulsion designs, the application of HTPB systems by

Recycling tires? Reversible crosslinking of poly(butadiene).

PubMed

Trovatti, Eliane; Lacerda, Talita M; Carvalho, Antonio J F; Gandini, Alessandro

2015-04-01

Furan-modified poly(butadiene) prepared by the thiol-ene click reaction is crosslinked with bismaleimides through the Diels-Alder reaction, giving rise to a novel recyclable elastomer. This is possible because of the thermal reversibility of the adducts responsible for the formation of the network. The use of this strategy provides the possibility to produce recyclable tires. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The use of gamma irradiation in preparation of polybutadiene rubber nanopowder; Its effect on particle size, morphology and crosslink structure of the powder

NASA Astrophysics Data System (ADS)

Rezaei Abadchi, Majid; Jalali-Arani, Azam

2014-02-01

The aim of this work was the preparation and characterization of polybutadiene rubber (BR) powder by irradiating of rubber lattices using 60Co radiation and spray-drying of them at the appropriate condition. The influences of absorbed dose on the volume swelling ratio, molecular weight between crosslinks, gel fraction, and glass transition temperature of obtained powder were studied. Morphology, size and size distribution of rubber particles were examined by using scanning electron microscopy (SEM) and laser particle size analyzer (LPSA) technique, respectively. Results obtained by LPSA revealed that radiation has no effect on particle size of rubber latex but after drying, adherence properties of rubber particle causes increase in particle size of rubber powder, as shown in SEM photograph. Fourier transform infrared spectroscopy of rubber powders confirmed that with increasing the irradiation dose, characteristic peak corresponds to the >Cdbnd C< double bands decreased. Also Charlesby-Pinner equation was used to evaluate radiation yield.

Polybutadiene and Styrene-Butadiene rubbers for high-dose dosimetry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oliveira, Lucas N.; Instituto de Pesquisas Energeticas e Nucleares -IPEN, Sao Paulo-SP; Vieira, Silvio L.

2015-07-01

Polybutadiene and Styrene-Butadiene are synthetical rubbers used widely for pneumatic tires manufacturing. In this research, the dosimeter characteristics of those rubbers were studied for application in high-dose dosimetry. The rubber samples were irradiated with doses of 10 Gy up to 10 kGy, using a {sup 60}Co Gamma Cell-220 system (dose rate of 1.089 kGy/h) and their readings were taken on a Fourier Transform Infrared Spectroscopy-FTIR system (model Frontier/Perkin Elmer). The ratios of two absorbance peaks were taken for each kind of rubber spectrum, Polybutadiene (1306/1130 cm{sup -1}) and Styrene-Butadiene (1449/1306 cm{sup -1}). The ratio calculated was used as the responsemore » to the irradiation, and is not uniform across the sample. From the results, it can be concluded for both rubbers: a) the dose-response curves may be useful for high-dose dosimetry (greater than 250 Gy); b) their response for reproducibility presented standard deviations lower than 2.5%; c) the relative sensitivity was higher for Styrene-Butadiene (1.86 kGy{sup -1}) than for Polybutadiene (1.81 kGy{sup -1}), d) for doses of 10 kGy to 200 kGy, there was no variation in the dosimetric response. Both types of rubber samples showed usefulness as high-dose dosimeters. (authors)« less

Microstructure of the combustion zone: Thin-binder AP-polymer sandwiches

NASA Technical Reports Server (NTRS)

Price, E. W.; Panyam, R. R.; Sigman, R. K.

1980-01-01

Experimental results are summarized for systematic quench-burning tests on ammonium perchlorate-HC binder sandwiches with binder thicknesses in the range 10 - 150 microns. Tests included three binders (polysulfide, polybutadiene-acrylonitrile, and hydroxy terminated polybutadiene), and pressures from 1.4 to 14 MPa. In addition, deflagration limits were determined in terms of binder thickness and pressure. Results are discussed in terms of a qualitative theory of sandwich burning consolidated from various sources. Some aspects of the observed results are explained only speculatively.

Nucleotide Crosslinked Polybutadiene for Replacement of Isocyanate-Cured Hydroxyl-Terminated Polybutadiene (HTPB) Systems (Briefing Charts)

DTIC Science & Technology

2014-08-10

sulfur , nitrate salts, carbon (charcoal) – Unreliable ballistic properties – Could not be used in large diameter, high thrust motors • Consolidation of...a programmed manner – Molten Asphalt • Heated to a fluid melt, mixed with oxidant, cast into motor cavity and allowed to cool • Low solids content...which could be formulated • Poor mechanical properties of highly loaded asphalt – Acrylate monomers • Monomers mixed with oxidizers and curative (divinyl

Improved Tumor Targeting of Polymer-based Nanovesicles Using Polymer-Lipid Blends

PubMed Central

Cheng, Zhiliang; Elias, Drew R.; Kamat, Neha P.; Johnston, Eric D.; Poloukhtine, Andrei; Popik, Vladimir; Hammer, Daniel A.; Tsourkas, Andrew

2011-01-01

Block copolymer-based vesicles have recently garnered a great deal of interest as nanoplatforms for drug delivery and molecular imaging applications due to their unique structural properties. These nanovesicles have been shown to direct their cargo to disease sites either through enhanced permeability and retention or even more efficiently via active targeting. Here we show that the efficacy of nanovesicle targeting can be significantly improved when prepared from polymer-lipid blends compared with block copolymer alone. Polymer-lipid hybrid nanovesicles were produced from the aqueous co-assembly of the diblock copolymer, poly(ethylene oxide)-block-polybutadiene (PEO-PBD), and the phospholipid, hydrogenated soy phosphatidylcholine (HSPC). The PEG-based vesicles, 117 nm in diameter, were functionalized with either folic acid or anti-HER2/neu affibodies as targeting ligands to confer specificity for cancer cells. Our results revealed that nanovesicles prepared from polymer-lipid blends led to significant improvement in cell binding compared to nanovesicles prepared from block copolymer alone in both in vitro cell studies and murine tumor models. Therefore, it is envisioned that nanovesicles composed of polymer-lipid blends may constitute a preferred embodiment for targeted drug delivery and molecular imaging applications. PMID:21899335

Impact behavior of f-silica and amine terminated polybutadiene co-acrylonitrile rubber modified novolac epoxy/Kevlar nanocomposites

NASA Astrophysics Data System (ADS)

Kavita, Pal, Vijayeta; Tiwari, R. K.

2018-05-01

In the present work, nano-fumed silica treated with 3-Glycidoxypropyl trimethoxy silane (f-silica) was used as a nanoreinforcement in the fabrication of amine terminated polybutadiene co-acrylonitrile rubber (ATBN) modified Kevlar/epoxy based nanocomposites. Nanocomposites with different f-silica loading (0, 0.5, 1.0 and 2.0 wt. %) and having same ATBN (10 wt. %) were made and characterized by Izod impact test for evaluating impact strength values. All the nanocomposites showed better impact strength than neat Kevlar/novolac epoxy based composite.

Microwave-immobilized polybutadiene stationary phase for reversed-phase high-performance liquid chromatography.

PubMed

Lopes, Nilva P; Collins, Kenneth E; Jardim, Isabel C S F

2004-03-19

Polybutadiene (PBD) has been immobilized on high-performance liquid chromatography (HPLC) silica by microwave radiation at various power levels (52-663 W) and actuation times (3-60 min). Columns prepared from these reversed-phase HPLC materials, as well as from similar non-irradiated materials, were tested with standard sample mixtures and characterized by elemental analysis (%C) and infrared spectroscopy. A microwave irradiation of 20 min at 663 W gives a layer of immobilized PBD that presented good performance. Longer irradiation times give thicker immobilized layers having less favorable chromatographic properties.

Thermal cis-trans isomerization of cis,cis-3,7-decadiene - A model for cis-1,4-polybutadiene

NASA Technical Reports Server (NTRS)

Golub, M. A.; Lee, W. M.

1983-01-01

The thermal cis-trans isomerization of cis,cis-3,7-decadiene (DD), a model compound for cis-PBD, is reported. It is demonstrated that the rather low E for the polyalkenamer isomerizations compared with that for the 2-olefins is not an artifact of the solid polymer structures, but rather is characteristic of both small and large molecules possessing pairs of nonconjugated vinylene double bonds in a suitable arrangement.

Structural Assessment of Solid Propellant Grains (l’Evaluation structurale des blocs de poudre a’ propergol solide)

DTIC Science & Technology

1997-12-01

bonds) This technique is based on the observation of the reflection and attenuation of an ultrasonic wave traversing an object, and is used to check...Nearly all present day composite propellants for tactical rocket motors use hydroxy-terminated polybutadiene ( HTPB ) as a binder as this offers the...polyurethane as a binder. The inferior mechanical properties of these propellants compared to HTPB limited their use. In large space booster and

Solventless, curable fluid oligomeric systems for high performance microwave, acoustical and mechanical applications

NASA Technical Reports Server (NTRS)

Lefave, G. M.; Stanton, Leo; Foreman, Jim

1994-01-01

While establishing the basis for a 'Technology 2000' product plan several years ago we plugged in the usual factors contributing toward product success: price/performance justifiable; profitable, warranting high quality maintenance, enhancement, and specific property improvement; narrow inventory requirements; and raw material integrable backwards with easily variable properties (molecular weight, functionality, and isomer control). We resolved this by selecting radical functional, low molecular weight polybutadiene liquid polymers. Encouraged by the need for solid rocket binders, several companies embarked on various perceptions of binder performance requirements over four decades ago. Initially dominated by progress of liquid polysulfides, soon a few settled primarily upon polybutadiene based binders. Such an approach in a few instances was exploited quite viably with a series of functional group terminated liquid polybutadienes: hydroxyl, mercaptan, carboxyl, vinyl, and amine. Good results are obtained for oligomers, liquid polymers, and their hybrids. The only significant limits on compounded products has been solvent resistance and oxidative sensitivity, unless sufficient proportion of sulfide or nitrile moiety is incorporated. For convenience, they have been grouped under the trademarks Nylane, Seamax, Oligomax, and Castomax.

Preparation of a polybutadiene stationary phase immobilized by gamma radiation for reversed-phase high-performance liquid chromatography.

PubMed

Lopes, Nilva P; Collins, Kenneth E; Jardim, Isabel C S F

2003-02-14

Polybutadiene (PBD) has been immobilized on HPLC silica by gamma radiation doses in the range from 5 to 180 kGy. Columns prepared from these reversed-phase materials, as well as from similar non-irradiated materials, were tested with standard sample mixtures and characterized by elemental analysis (% C) and infrared spectroscopy. A low dose of 5 kGy is sufficient to produce a layer of immobilized PBD which functions as an efficient and stable stationary phase. Higher doses give thicker immobilized layers having less favorable chromatographic properties.

Substrate Induced Osteoblast-Like Differentiation of Stromal Stem Cells

NASA Astrophysics Data System (ADS)

Belizar, Jacqueline; Glaser, Reena; Hung, Matthew; Simon, Marcia; Jurukovski, Vladimir; Rafailovich, Miriam; Shih, Alice

2009-03-01

We have demonstrated that Adipose-derived stem cells (ASCs) can be induced to biomineralize on a polybutadiene (PB) coated Si substrate. The cells began to generate calcium phosphate deposits after a five-day incubation period in the absence of dexamethasone. Control cells plated on tissue culture PS culture dish (TCP) did not biomineralize. In addition, the biomineralizing culture retained proliferative cells In order to determine whether the induction was transient, we transferred the cells exposed to polybutadiene after 14 and 28-day incubation periods to TCP dishes. These cells continued to biominerlize. Genetic testing is underway which will determine whether differentiation is maintained after transfer.

A Fast and Effective Pyridine-Free Method for the Determination of Hydroxyl Value of Hydroxyl-Terminated Polybutadiene and Other Hydroxy Compounds

NASA Astrophysics Data System (ADS)

Alex, Ancy Smitha; Kumar, Vijendra; Sekkar, V.; Bandyopadhyay, G. G.

2017-07-01

Hydroxyl-terminated polybutadiene (HTPB) is the workhorse propellant binder for launch vehicle and missile applications. Accurate determination of the hydroxyl value (OHV) of HTPB is crucial for tailoring the ultimate mechanical and ballistic properties of the propellant derived. This article describes a fast and effective methodology free of pyridine based on acetic anhydride, N-methyl imidazole, and toluene for the determination of OHV of nonpolar polymers like HTPB and other hydroxyl compounds. This method gives accurate and reproducible results comparable to standard methods and is superior to existing methods in terms of user friendliness, efficiency, and time requirement.

Azidated Ether-Butadiene-Ether Block Copolymers as Binders for Solid Propellants

NASA Astrophysics Data System (ADS)

Cappello, Miriam; Lamia, Pietro; Mura, Claudio; Polacco, Giovanni; Filippi, Sara

2016-07-01

Polymeric binders for solid propellants are usually based on hydroxyl-terminated polybutadiene (HTPB), which does not contribute to the overall energy output. Azidic polyethers represent an interesting alternative but may have poorer mechanical properties. Polybutadiene-polyether copolymers may combine the advantages of both. Four different ether-butadiene-ether triblock copolymers were prepared and azidated starting from halogenated and/or tosylated monomers using HTPB as initiator. The presence of the butadiene block complicates the azidation step and reduces the storage stability of the azidic polymer. Nevertheless, the procedure allows modifying the binder properties by varying the type and lengths of the energetic blocks.

Dynamic characterization of solid rockets

NASA Technical Reports Server (NTRS)

1973-01-01

The structural dynamics of solid rockets in-general was studied. A review is given of the modes of vibration and bending that can exist for a solid propellant rocket, and a NASTRAN computer model is included. Also studied were the dynamic properties of a solid propellant, polybutadiene-acrylic acid-acrylonitrile terpolymer, which may be used in the space shuttle rocket booster. The theory of viscoelastic materials (i.e, Poisson's ratio) was employed in describing the dynamic properties of the propellant. These studies were performed for an eventual booster stage development program for the space shuttle.

Synthesis and characterization of modified starch/polybutadiene as novel transdermal drug delivery system.

PubMed

Saboktakin, Mohammad Reza; Akhyari, Shahab; Nasirov, Fizuli A

2014-08-01

Transdermal drug delivery systems are topically administered medicaments in the form of patches that deliver drugs for systemic effects at a predetermined and controlled rate. It works very simply in which drug is applied inside the patch and it is worn on skin for long period of time. Polymer matrix, drug, permeation enhancers are the main components of transdermal drug delivery systems. The objective of the present study was to develop the modified starch and 1,4-cis polybutadiene nanoparticles as novel polymer matrix system. We have been studied the properties of a novel transdermal drug delivery system with clonidine as drug model. Copyright © 2014 Elsevier B.V. All rights reserved.

Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners

PubMed Central

Bärwinkel, Stefanie; Seidel, Andreas; Hobeika, Sven; Hufen, Ralf; Mörl, Michaela; Altstädt, Volker

2016-01-01

Morphology formation during compounding, as well as injection molding of blends containing 60 wt % polycarbonate (PC) and 40 wt % polybutadiene rubber-modified styrene-acrylonitrile copolymers (ABS), has been investigated by transmission electron microscopy (TEM). Profiles of the blend morphology have been recorded in injection-molded specimens and significant morphology gradients observed between their skin and core. A <10 µm thick surface layer with strongly dispersed and elongated nano-scale (streak-like) styrene acrylonitrile (SAN) phases and well-dispersed, isolated SAN-grafted polybutadiene rubber particles is followed by a 50–150 µm thick skin layer in which polymer morphology is characterized by lamellar SAN/ABS phases. Thickness of these lamellae increases with the distance from the specimen’s surface. In the core of the specimens the SAN-grafted polybutadiene rubber particles are exclusively present within the SAN phases, which exhibit a much coarser and less oriented, dispersed morphology compared to the skin. The effects of the viscosity of the SAN in the PC/ABS blends on phase morphologies and correlations with fracture mechanics in tensile and impact tests were investigated, including scanning electron microscopy (SEM) assessment of the fracture surfaces. A model explaining the mechanisms of morphology formation during injection molding of PC/ABS blends is discussed. PMID:28773780

Infrared Spectroscopic Study on Structural Change and Interfacial Interaction in Rubber Composites Filled with Silica-Kaolin Hybrid Fillers

NASA Astrophysics Data System (ADS)

Chen, Y.; Guan, J.; Hu, H.; Gao, H.; Zhang, L.

2016-07-01

A series of natural rubber/styrene butadiene rubber/polybutadiene rubber composites was prepared with nanometer silica and micron kaolin by a dry modification process, mechanical compounding, and mold vulcanization. Fourier transform infrared spectroscopy and a scanning electron microscope were used to investigate the structural changes and interfacial interactions in composites. The results showed that the "seesaw" structure was formed particularly with the incorporation of silica particles in the preparation process, which would be beneficial to the dispersibility of fillers in the rubber matrix. The kaolinite platelets were generally arranged in directional alignment. Kaolinite with smaller particle size and low-defect structure was more stable in preparation, but kaolinite with larger particle size and high defect structure tended to change the crystal structure. The composite prepared in this research exhibited excellent mechanical and thermal properties.

Chitin based polyurethanes using hydroxyl terminated polybutadiene, part III: surface characteristics.

PubMed

Zia, Khalid Mahmood; Zuber, Mohammad; Saif, Muhammad Jawwad; Jawaid, Mohammad; Mahmood, Kashif; Shahid, Muhammad; Anjum, Muhammad Naveed; Ahmad, Mirza Nadeem

2013-11-01

Hydroxy terminated polybutadiene (HTPB)-chitin based polyurethanes (PUs) with controlled hydrophobicity were synthesized using HTPB and toluene diisocyanate (TDI). The prepolymer was extended with different mass ratios of chitin and 1,4-butane diol (BDO). The effect of chitin contents in chain extender (CE) proportions on surface properties was studied and investigated. Incorporation of chitin contents into the final PU showed decrease in contact angle value of water drop, water absorption (%) and swelling behavior. The antibacterial activity of the prepared samples was affected by varying the chitin contents in the chemical composition of the final PU. The results demonstrated that the use of prepared material can be suggested as non-absorbable suture. Copyright © 2013 Elsevier B.V. All rights reserved.

Multidetector thermal field-flow fractionation as a novel tool for the microstructure separation of polyisoprene and polybutadiene.

PubMed

Greyling, Guilaume; Pasch, Harald

2014-11-01

For the first time, it is demonstrated that thermal field-flow fractionation (ThFFF) is an efficient tool for the fractionation of polyisoprene (PI) and polybutadiene (PB) with regard to molecular microstructure. ThFFF analysis of 1,4- and 3,4-PI as well as 1,4- and 1,2-PB samples in tetrahydrofuran (THF), THF/cyclohexane, and cyclohexane reveals that isomers of the same polymer family having similar molar masses exhibit different Soret coefficients depending on microstructure for each solvent. The separation according to microstructure is found to be based on the cooperative influence of the normal and the thermal diffusion coefficient. Of the three solvents, cyclohexane has the greatest influence on the fractionation of the isomers. In order to determine the distribution of isomeric structures in the PI and PB samples, the samples are fractionated by ThFFF in cyclohexane and subsequently analyzed by (1) H NMR. The isomeric distributions determined from NMR data correlate well with ThFFF retention data of the samples and thus further highlight the unique fractionating capabilities of ThFFF. The interplay of the normal and thermal diffusion coefficients that are influenced by temperature and the mobile phase opens the way to highly selective fractionations without the drawbacks of column-based separation methods. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ultrathin epidermal strain sensor based on an elastomer nanosheet with an inkjet-printed conductive polymer

NASA Astrophysics Data System (ADS)

Tetsu, Yuma; Yamagishi, Kento; Kato, Akira; Matsumoto, Yuya; Tsukune, Mariko; Kobayashi, Yo; Fujie, Masakatsu G.; Takeoka, Shinji; Fujie, Toshinori

2017-08-01

To minimize the interference that skin-contact strain sensors cause natural skin deformation, physical conformability to the epidermal structure is critical. Here, we developed an ultrathin strain sensor made from poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) inkjet-printed on a polystyrene-polybutadiene-polystyrene (SBS) nanosheet. The sensor, whose total thickness and gauge factor were ˜1 µm and 0.73 ± 0.10, respectively, deeply conformed to the epidermal structure and successfully detected the small skin strain (˜2%) while interfering minimally with the natural deformation of the skin. Such an epidermal strain sensor will open a new avenue for precisely detecting the motion of human skin and artificial soft-robotic skin.

Theoretical Evaluation of Crosslink Density of Chain Extended Polyurethane Networks Based on Hydroxyl Terminated Polybutadiene and Butanediol and Comparison with Experimental Data

NASA Astrophysics Data System (ADS)

Sekkar, Venkataraman; Alex, Ancy Smitha; Kumar, Vijendra; Bandyopadhyay, G. G.

2018-01-01

Polyurethane networks between hydroxyl terminated polybutadiene (HTPB) and butanediol (BD) were prepared using toluene diisocyanate (TDI) as the curative. HTPB and BD were taken at equivalent ratios viz.: 1:0, 1:1, 1:2, 1:4, and 1:8. Crosslink density (CLD) was theoretically calculated using α-model equations developed by Marsh. CLD for the polyurethane networks was experimentally evaluated from equilibrium swell and stress-strain data. Young's modulus and Mooney-Rivlin approaches were adopted to calculate CLD from stress-strain data. Experimentally obtained CLD values were enormously higher than theoretical values especially at higher BD/HTPB equivalent ratios. The difference in the theoretical and experimental values for CLD was explained in terms of local crystallization due to the formation of hard segments and hydrogen bonded interactions.

Structural Characteristics and Swelling Mechanism of Two Commercial Nitrile-Butadiene Elastomers in Various Fluids

DTIC Science & Technology

2012-01-06

polyacrylonitrile, -(CH2=CH- C ≡ N )- n and polybutadiene, -(CH2-CH=CH-CH2)- n . The characteristics of a given elastomer are therefore expected to depend on the...presence of the nitrile (cyano) - C ≡ N group which is known to yield a sharp peak at 2235 cm-1 in IR spectra. The presence of the line due to C = C double bond...70 and N0741-75 obtained using KBr pellet method are shown in Fig. 2. In the IR spectra of both elastomers, the nitrile (- C ≡ N ) band at 2235 cm-1 is

40 CFR 63.494 - Back-end process provisions-residual organic HAP limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology or control or recovery devices. (1) For styrene butadiene rubber produced by the emulsion process... rubber produced by any process other than a solution or emulsion process, polybutadiene rubber produced...

Characterization of a new stationary phase based on microwave immobilized polybutadiene on titanium oxide-modified silica.

PubMed

Morais, Lais S R; Jardim, Isabel C S F

2005-05-06

Titanium oxide-modified silica was prepared by reaction of silica with titanium tetrabutoxide and then was used as support in the preparation of stationary phases with self-immobilized polybutadiene (PBD) and PBD immobilized through microwave radiation. Chromatographic performance of the stationary phases was evaluated in terms of the efficiency (plates/m), asymmetry (A(s)), retention factor (k) and resolution (R(s)) of two standard sample mixtures, one of then containing the basic compound N,N-dimethylaniline. A microwave irradiation of 30 min at 520 W gave the best efficiency (86,500 N m(-1)), greater than that of a 6-day self immobilized phase (69,500 N m(-1)). Self-immobilized stationary phases prepared with bare silica were also studied for comparison. These resulted in lower chromatographic performance, 43,800 N m(-1), when compared to the self-immobilized phase prepared with titanized silica.

Influence of air on polybutadiene used in the preparation of stationary phases for high-performance liquid chromatography.

PubMed

Lopes, Nilva P; Collins, Kenneth E; Jardim, Isabel C S F

2004-03-19

A 100 ml bottle of polybutadiene, PBD, was repeatedly exposed to air over a period of 6 months. Samples were taken at time zero (PBD-0), after 3 months (PBD-3) and 6 months (PBD-6). These samples were sorbed onto HPLC silica by an open-air solution-evaporation procedure, which involved exposure to the atmosphere for 6 days. Portions of the three sets of samples were used to compare self-immobilization and the effects of 100 degrees C thermal treatments in air or nitrogen on HPLC performance of the resulting phases. It is concluded that self-immobilization is enhanced by prior exposure of sorbed PBD to air and subsequent heating at 100 degrees C further enhances column performance. The best performance (10(5) plates m(-1)) resulted from 4 h heating of PBD-6 material in nitrogen.

Erosive Burning Study Utilizing Ultrasonic Measurement Techniques

NASA Technical Reports Server (NTRS)

Furfaro, James A.

2003-01-01

A 6-segment subscale motor was developed to generate a range of internal environments from which multiple propellants could be characterized for erosive burning. The motor test bed was designed to provide a high Mach number, high mass flux environment. Propellant regression rates were monitored for each segment utilizing ultrasonic measurement techniques. These data were obtained for three propellants RSRM, ETM- 03, and Castor@ IVA, which span two propellant types, PBAN (polybutadiene acrylonitrile) and HTPB (hydroxyl terminated polybutadiene). The characterization of these propellants indicates a remarkably similar erosive burning response to the induced flow environment. Propellant burnrates for each type had a conventional response with respect to pressure up to a bulk flow velocity threshold. Each propellant, however, had a unique threshold at which it would experience an increase in observed propellant burn rate. Above the observed threshold each propellant again demonstrated a similar enhanced burn rate response corresponding to the local flow environment.

Development of procedures for calculating stiffness and damping of elastomers in engineering applications. Part 5: Elastomer performance limits and the design and test of an elastomer damper

NASA Technical Reports Server (NTRS)

Tecza, J. A.; Darlow, M. S.; Smalley, A. J.

1979-01-01

Tests were performed on elastomer specimens of the material polybutadiene to determine the performance limitations imposed by strain, temperature, and frequency. Three specimens were tested: a shear specimen, a compression specimen, and a second compression specimen in which thermocouples were embedded in the elastomer buttons. Stiffness and damping were determined from all tests, and internal temperatures were recorded for the instrumented compression specimen. Measured results are presented together with comparisons between predictions of a thermo-viscoelastic analysis and the measured results. Dampers of polybutadiene and Viton were designed, built, and tested. Vibration measurements were made and sensitivity of vibration to change in unbalance was also determined. Values for log decrement were extracted from the synchronous response curves. Comparisons were made between measured sensitivity to unbalance and log decrement and predicted values for these quantities.

Interaggregate Interaction in Filled Rubber

DTIC Science & Technology

1989-01-01

from a black masterbatch (Carbomix 1848 from the Copolymer Rubber and Chemical Corporation). The masterbatch was unmilled (SBR-83-0), passed 5 times...Vanderbilt Company) 3 97% 1,2-polybutadiene (Firestone Tire and Rubber Company) 4 Carbomix 1848 Masterbatch (Copolymer Rubber and Chemical Corporation) 14

Effect of Branched Gap Synthesis Parameters on Mechanical Properties of Rocket Propellants

DTIC Science & Technology

1995-12-01

modulus hydroxyl functionality glycidyl azide polymer hexanetriol hydroxy-terminated polybutadiene isophorone diisocyanate hydroxyl equivalent... hexanetriol (HT), glycerol and polyethylene glycol (PEG) with MW 600. The reaction was carried out with one polyol or a blend of two polyols and

Experimentally driven atomistic model of 1,2 polybutadiene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gkourmpis, Thomas, E-mail: thomas.gkourmpis@borealisgroup.com; Mitchell, Geoffrey R.; Centre for Rapid and Sustainable Product Development, Institute Polytechnic Leiria, Marinha Grande

2014-02-07

We present an efficient method of combining wide angle neutron scattering data with detailed atomistic models, allowing us to perform a quantitative and qualitative mapping of the organisation of the chain conformation in both glass and liquid phases. The structural refinement method presented in this work is based on the exploitation of the intrachain features of the diffraction pattern and its intimate linkage with atomistic models by the use of internal coordinates for bond lengths, valence angles, and torsion rotations. Atomic connectivity is defined through these coordinates that are in turn assigned by pre-defined probability distributions, thus allowing for themore » models in question to be built stochastically. Incremental variation of these coordinates allows for the construction of models that minimise the differences between the observed and calculated structure factors. We present a series of neutron scattering data of 1,2 polybutadiene at the region 120–400 K. Analysis of the experimental data yields bond lengths for Cî—¸C and C î—» C of 1.54 Å and 1.35 Å, respectively. Valence angles of the backbone were found to be at 112° and the torsion distributions are characterised by five rotational states, a three-fold trans-skew± for the backbone and gauche± for the vinyl group. Rotational states of the vinyl group were found to be equally populated, indicating a largely atactic chan. The two backbone torsion angles exhibit different behaviour with respect to temperature of their trans population, with one of them adopting an almost all trans sequence. Consequently, the resulting configuration leads to a rather persistent chain, something indicated by the value of the characteristic ratio extrapolated from the model. We compare our results with theoretical predictions, computer simulations, RIS models and previously reported experimental results.« less

New polymer systems: Chain extension by dianhydrides

NASA Technical Reports Server (NTRS)

Rhein, R. A.; Ingham, J. D.

1974-01-01

Three anhydrides provide effective chain extension of hydroxy-terminated polyalkylene oxides and polybutadienes. Novel feature of these anhydride reactants is that they are difunctional as anhydrides, but they are tetrafunctional if conditions are selected that lead to total esterification or reaction of all carboxyl groups.

Preparation of Water-Selective Polybutadiene Membranes and Their Use in Drying Alcohols by Pervaporation and Vapor Permeation Technologies

EPA Science Inventory

Separating azeotrope-forming solvent-water mixtures by conventional distillation poses technical, economic, and environmental challenges. Membrane technology using water-permselective membranes provides an efficient alternative for water removal from solvents. We present here a n...

A Carboxyl-Terminated Polybutadiene Liquid Rubber Modified Epoxy Resin with Enhanced Toughness and Excellent Electrical Properties

NASA Astrophysics Data System (ADS)

Dong, Lina; Zhou, Wenying; Sui, Xuezhen; Wang, Zijun; Cai, Huiwu; Wu, Peng; Zuo, Jing; Liu, Xiangrong

2016-07-01

The modification of epoxy (EP) resin with carboxyl-terminated polybutadiene (CTPB) liquid rubber was carried out in this work. The chemical reaction between the oxirane ring of EP and the carboxyl group of CTPB and kinetic parameters were investigated by Fourier transform infrared and differential scanning calorimetry. The resulting pre-polymers were cured with methyl hexahydrophthalic anhydride. Scanning electron microscopic observations indicate that the micro-sized CTPB particles dispersed uniformly in the EP matrix formed a two-phase morphology, mainly contributing to the improved toughness of the modified network. The best overall mechanical performance was achieved with 20 phr CTPB; above it, a fall in the strength and modulus was observed. The storage modulus and loss declined with the CTPB concentration due to its lower modulus and plasticizing effect from dynamic mechanical analysis measurements. Moreover, due to the weak polarity and excellent electrical insulation of CTPB, the CTPB-modified EP presented higher electrical resistivities and breakdown strength, and low dielectric permittivity and loss compared with neat EP.

Unlocking Chain Exchange in Highly Amphiphilic Block Polymer Micellar Systems: Influence of Agitation.

PubMed

Murphy, Ryan P; Kelley, Elizabeth G; Rogers, Simon A; Sullivan, Millicent O; Epps, Thomas H

2014-11-18

Chain exchange between block polymer micelles in highly selective solvents, such as water, is well-known to be arrested under quiescent conditions, yet this work demonstrates that simple agitation methods can induce rapid chain exchange in these solvents. Aqueous solutions containing either pure poly(butadiene- b -ethylene oxide) or pure poly(butadiene- b -ethylene oxide- d 4 ) micelles were combined and then subjected to agitation by vortex mixing, concentric cylinder Couette flow, or nitrogen gas sparging. Subsequently, the extent of chain exchange between micelles was quantified using small angle neutron scattering. Rapid vortex mixing induced chain exchange within minutes, as evidenced by a monotonic decrease in scattered intensity, whereas Couette flow and sparging did not lead to measurable chain exchange over the examined time scale of hours. The linear kinetics with respect to agitation time suggested a surface-limited exchange process at the air-water interface. These findings demonstrate the strong influence of processing conditions on block polymer solution assemblies.

Two-Dimensional Liquid Chromatography Analysis of Polystyrene/Polybutadiene Block Copolymers.

PubMed

Lee, Sanghoon; Choi, Heejae; Chang, Taihyun; Staal, Bastiaan

2018-05-15

A detailed characterization of a commercial polystyrene/polybutadiene block copolymer material (Styrolux) was carried out using two-dimensional liquid chromatography (2D-LC). The Styrolux is prepared by statistical linking reaction of two different polystyrene- block-polybutadienyl anion precursors with a multivalent linking agent. Therefore, it is a mixture of a number of branched block copolymers different in molecular weight, composition, and chain architecture. While individual LC analysis, including size exclusion chromatography, interaction chromatography, or liquid chromatography at critical condition, is not good enough to resolve all the polymer species, 2D-LC separations coupling two chromatography methods were able to resolve all polymer species present in the sample; at least 13 block copolymer species and a homopolystyrene blended. Four different 2D-LC analyses combining a different pair of two LC methods provide their characteristic separation results. The separation characteristics of the 2D-LC separations are compared to elucidate the elution characteristics of the block copolymer species.

Monodisperse Block Copolymer Particles with Controllable Size, Shape, and Nanostructure

NASA Astrophysics Data System (ADS)

Shin, Jae Man; Kim, Yongjoo; Kim, Bumjoon; PNEL Team

Shape-anisotropic particles are important class of novel colloidal building block for their functionality is more strongly governed by their shape, size and nanostructure compared to conventional spherical particles. Recently, facile strategy for producing non-spherical polymeric particles by interfacial engineering received significant attention. However, achieving uniform size distribution of particles together with controlled shape and nanostructure has not been achieved. Here, we introduce versatile system for producing monodisperse BCP particles with controlled size, shape and morphology. Polystyrene-b-polybutadiene (PS-b-PB) self-assembled to either onion-like or striped ellipsoid particle, where final structure is governed by amount of adsorbed sodium dodecyl sulfate (SDS) surfactant at the particle/surrounding interface. Further control of molecular weight and particle size enabled fine-tuning of aspect ratio of ellipsoid particle. Underlying physics of free energy for morphology formation and entropic penalty associated with bending BCP chains strongly affects particle structure and specification.

Morphological and thermal studies of chitin-curcumin blends derived polyurethanes.

PubMed

Mahmood, Kashif; Zia, Khalid Mahmood; Zuber, Mohammad; Tabasum, Shazia; Rehman, Saima; Zia, Fatima; Noreen, Aqdas

2017-12-01

The present study describes a novel ecofriendly series of chitin/curcumin/1,4-butane diol (BDO) blend derived polyurethanes (PUs), using hydroxy terminated polybutadiene (HTPB) and hexamethylene diisocyanate (HDI) along with different mole ratio of chitin, curcumin and BDO. The structural and morphological elucidation of the prepared films was done by FTIR and SEM techniques. The swelling behavior of the films was analyzed in both water and DMSO, which showed that incorporation of chitin increases the hydrophobicity and decreases the rate of swelling. Thermal analysis of synthesized PU blends revealed better thermal stability with following mole ratio 1:0.5:0.5 of chitin: curcumin: BDO as determined by TGA and DSC techniques. Copyright © 2017 Elsevier B.V. All rights reserved.

Liner Technology Program. Volume 3. Liner Development Methodology Manual

DTIC Science & Technology

1982-05-01

derivative of trimesic acid, trimenoyl-l- (2-ethyl) aziridine BNO Hydroxyl ethyl ester of carboxy-terminated polybutadiene Catocene Liquid ferrocene ...diisocyanate MAPO rris-l-(2-methyl) aziridinyl phosphine oxide I.’ lNA Methyl nedic anhydride; methyl endo-cis-cicyolo-2,2,1-5- heptene-2,3-dicarboxylic

Core microstructure, morphology and chain arrangement of block copolymer self-assemblies as investigated by thermal field-flow fractionation.

PubMed

Muza, U L; Greyling, G; Pasch, H

2018-08-10

The self-assembly of block copolymers (BCPs), as a result of solvent selectivity for one block, has recently received significant attention due to novel applications of BCPs in pharmaceuticals, biomedicine, cosmetics, electronics and nanotechnology. The correlation of BCP microstructure and the structure of the resulting self-assemblies requires advanced analytical methods. However, traditional bulk characterization techniques are limited in the quest of providing detailed information regarding molar mass (M w ), hydrodynamic size (D h ), chemical composition, and morphology for these self-assemblies. In the present study, thermal field-flow fractionation (ThFFF) is utilised to investigate the impact of core microstructure on the resultant solution properties of vesicles prepared from polystyrene-polybutadiene block copolymers (PS-b-PBd) with 1.2- and 1.4-polybutadiene blocks, respectively. As compared to investigations on the impact of the corona microstructure, the impact of core microstructure on micellar properties has largely been neglected in previous work. In N,N-dimethylacetamide (DMAc) these BCPs form vesicles having PS shells and PBd cores. D h , M w , aggregation number, and critical micelle concentration of these micelles are shown to be sensitive to the core microstructure, therefore, demonstrating the potential of microstructural differences to be used for providing tuneable pathways to specific self-assemblies. It is shown that micelles prepared from BCPs of similar PS and PBd block sizes are successfully separated by ThFFF. It is further demonstrated in this study that PS-b-PBd vesicles and PS homopolymers of identical surface chemistry (PS) and comparable D h in DMAc, can be separated by ThFFF. Copyright © 2018 Elsevier B.V. All rights reserved.

Interface for Light-Driven Electron Transfer by Photosynthetic Complexes Across Block Copolymer Membranes.

PubMed

Kuang, Liangju; Olson, Tien L; Lin, Su; Flores, Marco; Jiang, Yunjiang; Zheng, Wan; Williams, JoAnn C; Allen, James P; Liang, Hongjun

2014-03-06

Incorporation of membrane proteins into nanodevices to mediate recognition and transport in a collective and scalable fashion remains a challenging problem. We demonstrate how nanoscale photovoltaics could be designed using robust synthetic nanomembranes with incorporated photosynthetic reaction centers (RCs). Specifically, RCs from Rhodobacter sphaeroides are reconstituted spontaneously into rationally designed polybutadiene membranes to form hierarchically organized proteopolymer membrane arrays via a charge-interaction-directed reconstitution mechanism. Once incorporated, the RCs are fully active for prolonged periods based upon a variety of spectroscopic measurements, underscoring preservation of their 3D pigment configuration critical for light-driven charge transfer. This result provides a strategy to construct solar conversion devices using structurally versatile proteopolymer membranes with integrated RC functions to harvest broad regions of the solar spectrum.

Blends of Crystallizable Polybutadiene Isomers: Compatibilization by Addition of Amorphous Diblock Copolymer

DTIC Science & Technology

1991-07-24

Fourth International Meeting. 2, 898, A. Mangini, ed., Pergamon Press, England, 1962. Morero, D., E. Mantica, and L. Porni , Nuovo Cimento. Sup~pl. 15. 10...311, 1969. Natta G., and P. Corradini, Journal of Polymer Science, 20, 251, 1956. Natta, G., L. Porni , A. Carbonaro, and G. Lugli, Makromolekulare

21 CFR 175.300 - Resinous and polymeric coatings.

Code of Federal Regulations, 2014 CFR

2014-04-01

... triglycerides or fatty acids derived from the oils listed in paragraph (b)(3)(i) of this section to form esters.... Maleic anhydride adduct of butadiene styrene. Polybutadiene. (iv) Natural fossil resins, as the basic... with: Maleic anhydride. o-, m-, and p-substituted phenol-form-alde-hydes listed in paragraph (b)(3)(vi...

Space-Dependent Dynamics in 1,4-Polybutadiene Nanocomposite

DTIC Science & Technology

2013-01-01

Soxhlet extracted with cyclohexane to remove unattached polymer. The initial composition of 20.5% by volume carbon increased to 60% on extraction...spectroscopy the value of β(Q) for the nanocomposite; instead, we determine at each Q the β value yielding the expected τα ∼ Q−2/β behavior for small Q

Polyethylene Glycol-Poly(2-Methyl-5-Vinyl Tetrazole) Polymer Blend (A desensitizing Binder for Propellants and Explosives)

DTIC Science & Technology

1989-03-01

PVA, CTBN , PBAA, PMMA, etc. As a test of this predictability, we dissolved a vinyl acetate polymer in THF, and then added PMVT, and did succeed in...Polyvinyl acetate CTBN Carboxy terminated butadiene acrylonitrile PBAA Polybutadiene acrylic acid PMMA Polymethyl. methacrylate THF Tetrahydrofuran NMR

Chemiluminescence Study on Thermal Degradation of Aircraft Tire Elastomers

NASA Technical Reports Server (NTRS)

Mendenhall, G. D.; Stanford, T. B.; Nathan, R. A.

1976-01-01

Since the autoxidative process accounts in part for the degradation of rubber, including aircraft tires, it was felt that a study of the chemiluminescence from unsaturated elastomers could contribute significantly to an understanding of the degradation mechanism. The study revealed similarities in chemiluminescence behavior between four elastomers which were investigated, and it shows that similar oxidation mechanisms occur. Oxidative chemiluminescence was observed from purified samples of cis-1,4-polybutadiene, cis-1,4-polyisoprene, trans-polypentenamer, and 1,2-polybutadiene in an oxygen atmosphere at 25-150 C. The elastomer samples were placed in a 600 watt oven which is equipped with gas inlets for introducing any desired atmosphere. Chemiluminescence emission from the samples was focused with a two inch quartz lens onto the detector of a 12" photomultiplier which is connected to a photon counter. A strip-chart recorder, connected to the counter, permitted automatic data collection. Diagrams of the apparatus are included. The chemical reactions which occurred from the thermal decomposition of the polymer samples are described, and results (and tabulated data) are discussed.

Finite element implementation of a thermo-damage-viscoelastic constitutive model for hydroxyl-terminated polybutadiene composite propellant

NASA Astrophysics Data System (ADS)

Xu, Jinsheng; Han, Long; Zheng, Jian; Chen, Xiong; Zhou, Changsheng

2017-11-01

A thermo-damage-viscoelastic model for hydroxyl-terminated polybutadiene (HTPB) composite propellant with consideration for the effect of temperature was implemented in ABAQUS. The damage evolution law of the model has the same form as the crack growth equation for viscoelastic materials, and only a single damage variable S is considered. The HTPB propellant was considered as an isotropic material, and the deviatoric and volumetric strain-stress relations are decoupled and described by the bulk and shear relaxation moduli, respectively. The stress update equations were expressed by the principal stresses σ_{ii}R and the rotation tensor M, the Jacobian matrix in the global coordinate system J_{ijkl} was obtained according to the fourth-order tensor transformation rules. Two models having complex stress states were used to verify the accuracy of the constitutive model. The test results showed good agreement with the strain responses of characteristic points measured by a contactless optical deformation test system, which illustrates that the thermo-damage-viscoelastic model perform well at describing the mechanical properties of an HTPB propellant.

Nanoscale Structure of Urethane/Urea Elastomeric Films

NASA Astrophysics Data System (ADS)

Reis, Dennys; Trindade, Ana C.; Godinho, Maria Helena; Silva, Laura C.; do Carmo Gonçalves, Maria; Neto, Antônio M. Figueiredo

2017-02-01

The nanostructure of urethane/urea elastomeric membranes was investigated by small-angle X-ray scattering (SAXS) in order to establish relationships between their structure and mechanical properties. The networks were made up of polypropylene oxide (PPO) and polybutadiene (PB) segments. The structural differences were investigated in two types of membranes with the same composition but with different thermal treatment after casting. Type I was cured at 70-80 °C and type II at 20 °C. Both membranes showed similar phase separation by TEM, with nanodomains rich in PB or PPO and 25 nm dimensions. The main difference between type I and type II membranes was found by SAXS. The type I membrane spectra showed, besides a broad band at a 27-nm q value (modulus of the scattering vector), an extra band at 6 nm, which was not observed in the type II membrane. The SAXS spectra were interpreted in terms of PPO, PB soft segments, and urethane/urea links, as well as hard moiety segregation in the reaction medium. This additional segregation ( q = 7 nm), although subtle, results in diverse mechanical behavior of in both membranes.

The industrial production and use of 1,3-butadiene.

PubMed Central

Morrow, N L

1990-01-01

This presentation provides a brief overview of the production and use of 1,3-butadiene in the United States. Starting as a coproduct of ethylene, the 1,3-butadiene monomer is extracted and purified, then transferred to consumers. Major uses of 1,3-butadiene include the manufacture of styrene-butadiene rubber, polybutadiene rubber, and adiponitrile. PMID:2205493

Nanocomposites based on thermoplastic elastomers with functional basis of nano titanium dioxide

NASA Astrophysics Data System (ADS)

Yulovskaya, V. D.; Kuz'micheva, G. M.; Klechkovskaya, V. V.; Orekhov, A. S.; Zubavichus, Ya. V.; Domoroshchina, E. N.; Shegay, A. V.

2016-03-01

Nanocomposites based on a thermoplastic elastomer (TPE) (low-density polyethylene (LDPE) and 1,2-polybutadiene in a ratio of 60/40) with functional titanium dioxide nanoparticles of different nature, TiO2/TPE, have been prepared and investigated by a complex of methods (X-ray diffraction analysis using X-ray and synchrotron radiation beams, scanning electron microscopy, transmission electron microscopy, and X-ray energy-dispersive spectroscopy). The morphology of the composites is found to be somewhat different, depending on the TiO2 characteristics. It is revealed that nanocomposites with cellular or porous structures containing nano-TiO2 aggregates with a large specific surface and large sizes of crystallites and nanoparticles exhibit the best deformation‒strength and fatigue properties and stability to the effect of active media under conditions of ozone and vapor‒air aging.

Catch and Release: Orbital Symmetry Guided Reaction Dynamics from a Freed “Tension Trapped Transition State”

DOE PAGES

Wang, Junpeng; Ong, Mitchell T.; Kouznetsova, Tatiana B.; ...

2015-08-31

The dynamics of reactions at or in the immediate vicinity of transition states are critical to reaction rates and product distributions, but direct experimental probes of those dynamics are rare. In this paper, s-trans, s-trans 1,3-diradicaloid transition states are trapped by tension along the backbone of purely cis-substituted gem-difluorocyclopropanated polybutadiene using the extensional forces generated by pulsed sonication of dilute polymer solutions. Once released, the branching ratio between symmetry-allowed disrotatory ring closing (of which the trapped diradicaloid structure is the transition state) and symmetry-forbidden conrotatory ring closing (whose transition state is nearby) can be inferred. Finally, net conrotatory ring closingmore » occurred in 5.0 ± 0.5% of the released transition states, in excellent agreement with ab initio molecular dynamics simulations.« less

Synthesis and Characterization of High Energy Sheet Materials Based on HMX / RDX and Hydroxyl Terminated Polybutadiene

NASA Astrophysics Data System (ADS)

Elsharkawy, Karim; Guo, Lin; Taha, Elhussein; Fouda, Hany

2017-07-01

In this paper three types of thin sheets of highly energetic materials were prepared and characterized. The first based on 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX). The second type based on 1,3,5-trinitro-1,3,5-triazinane (RDX). Both types contain polyurethane (PU), formulated by hydroxyl terminated polybutadiene (HTPB) and Isophorondiisocyanate (IPDI). The third type based on (RDX) and polyisoprene (PI) as high elastomeric material. The first and second types of thin sheets were prepared by applying the casting technique while the third type was prepared by slurry technique then followed by rolling of the prepared beads of the RDX coated by PI. These high energy sheet materials were cured in oven at 60°C. The measured explosive properties of the prepared sheets were discussed and showed that the sensitivity to impact and friction of the prepared sheets explosives materials were markedly decreased when compared to pure HMX or pure RDX, but the sensitivity to heat was close to that of pure RDX. In spite of the markedly decrease in the sensitivity of these sheets, the explosive characteristics were nearly not affected the sheets have very good stress-strain values.

European Scientific Notes. Volume 36, Number 9

DTIC Science & Technology

1982-09-30

studies of super- One of the chief reasons the’ foregoing "conducting tunneling, ultrasonic attenuation , activity was initiated was the historical...paper entitled "The Effect of HTPB propellant and binder. Results from tests Polymer Characteristics on Propellant using 105-mm munitions show that...polybutadiene ( HTPB ) composite solid Dr. A. Iwama (Institute of Space and propellants. The influence of the polymer Astronautical Science, Tokyo, Japan

Specific Impulses Losses in Solid Propellant Rockets

DTIC Science & Technology

1974-12-17

binder -- polyvinyl, polyurethane, or polybutadiene) markedly increases performance. Aluminum is the most widely used metal since its energy properties...temperature is also used. -5- The specific impulse values calculated for a typical propellant with 16.4% aluminum are as follows: (p0 70 atm. p - 1 atm...Direct Measurement of Combuction Efficiency of Aluminum Analysis of the condensed phase enables the proportion of unburnt aluminum to be determined

The effects of viscoelastic polymer substrates on adult stem cell differentiation

NASA Astrophysics Data System (ADS)

Chang, Chungchueh; Fields, Adam; Ramek, Alex; Jurukovski, Vladimir; Simon, Marcia; Rafailovich, Miriam

2009-03-01

Dental Pulp Stem Cells (DPSCs) are known to differentiate in either bone, dentine, or nerve tissue by different environment signals. In this study, we have determined whether differentiation could only through modification of the substrate mechanics. Atomic Force Microscopy (AFM) on Shear Modulation Force Microscopy (SMFM) mode indicated that the spun-cast polybutadiene (PB) thin films could be used to provide different stiffness substrates by changing the thicknesses of thin films. DPSCs were then plated on these substrates and cultured in standard media. After 28 days incubation, Lasar Scanning Confocal Microscopy (LSCM) with mercury lamp indicated that the crystals were observed only on hard surfaces. The Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray analysis (EDX analysis) indicated that the crystals are calcium phosphates. The Glancing Incidence Diffraction (GID) was also used to determine the structure of crystals. These results indicate that DPSCs could be differentiated into osteoblasts by mechanical stimuli from substrate mechanics.

Nanocomposites based on thermoplastic elastomers with functional basis of nano titanium dioxide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yulovskaya, V. D.; Kuz’micheva, G. M., E-mail: galina-kuzmicheva@list.ru; Klechkovskaya, V. V.

2016-03-15

Nanocomposites based on a thermoplastic elastomer (TPE) (low-density polyethylene (LDPE) and 1,2-polybutadiene in a ratio of 60/40) with functional titanium dioxide nanoparticles of different nature, TiO{sub 2}/TPE, have been prepared and investigated by a complex of methods (X-ray diffraction analysis using X-ray and synchrotron radiation beams, scanning electron microscopy, transmission electron microscopy, and X-ray energy-dispersive spectroscopy). The morphology of the composites is found to be somewhat different, depending on the TiO{sub 2} characteristics. It is revealed that nanocomposites with cellular or porous structures containing nano-TiO{sub 2} aggregates with a large specific surface and large sizes of crystallites and nanoparticles exhibitmore » the best deformation‒strength and fatigue properties and stability to the effect of active media under conditions of ozone and vapor‒air aging.« less

Observing polymersome dynamics in controlled microscale flows

NASA Astrophysics Data System (ADS)

Kumar, Subhalakshmi; Shenoy, Anish; Schroeder, Charles

2015-03-01

Achieving an understanding of single particle rheology for large yet deformable particles with controlled membrane viscoelasticity is major challenge in soft materials. In this work, we directly visualize the dynamics of single polymersomes (~ 10 μm in size) in an extensional flow using optical microscopy. We generate polymer vesicular structures composed of polybutadiene-block-polyethylene oxide (PB-b-PEO) copolymers. Single polymersomes are confined near the stagnation point of a planar extensional flow using an automated microfluidic trap, thereby enabling the direct observation of polymersome dynamics under fluid flows with controlled strains and strain rates. In a series of experiments, we investigate the effect of varying elasticity in vesicular membranes on polymersome deformation, along with the impact of decreasing membrane fluidity upon increasing diblock copolymer molecular weight. Overall, we believe that this approach will enable precise characterization of the role of membrane properties on single particle rheology for deformable polymersomes.

Chemically specific coarse-grained models to investigate the structure of biomimetic membranes

DOE PAGES

Kowalik, Ma?gorzata; Schantz, Allen B.; Naqi, Abdullah; ...

2017-11-29

Biomimetic polymer/protein membranes are promising materials for DNA sequencing, sensors, drug delivery and water purification. These self-assembled structures are made from low molecular weight amphiphilic block copolymers (N hydrophobic < 40 for a diblock copolymer), including poly(ethylene oxide)–1,2-polybutadiene (EO–1,2-BD) and poly(ethylene oxide)–poly(ethyl ethylene) (EO–EE). To examine these membranes' nanoscale structure, we developed a coarse-grained molecular dynamics (CG MD) model for EO–1,2-BD and assembled a CG MD model for EO–EE using parameters from two published force fields. We observe that the polymers' hydrophobic core blocks are slightly stretched compared to the random coil configuration seen at higher molecular weights. We alsomore » observe an increase in the interdigitation of the hydrophobic leaflets with increasing molecular weight (consistent with literature). The hydration level of the EO corona (which may influence protein incorporation) is higher for membranes with a larger area/chain, regardless of whether EE or 1,2-BD forms the hydrophobic block. Our results provide a molecular-scale view of membrane packing and hydrophobicity, two important properties for creating polymer–protein biomimetic membranes.« less

Chemically specific coarse-grained models to investigate the structure of biomimetic membranes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kowalik, Ma?gorzata; Schantz, Allen B.; Naqi, Abdullah

Biomimetic polymer/protein membranes are promising materials for DNA sequencing, sensors, drug delivery and water purification. These self-assembled structures are made from low molecular weight amphiphilic block copolymers (N hydrophobic < 40 for a diblock copolymer), including poly(ethylene oxide)–1,2-polybutadiene (EO–1,2-BD) and poly(ethylene oxide)–poly(ethyl ethylene) (EO–EE). To examine these membranes' nanoscale structure, we developed a coarse-grained molecular dynamics (CG MD) model for EO–1,2-BD and assembled a CG MD model for EO–EE using parameters from two published force fields. We observe that the polymers' hydrophobic core blocks are slightly stretched compared to the random coil configuration seen at higher molecular weights. We alsomore » observe an increase in the interdigitation of the hydrophobic leaflets with increasing molecular weight (consistent with literature). The hydration level of the EO corona (which may influence protein incorporation) is higher for membranes with a larger area/chain, regardless of whether EE or 1,2-BD forms the hydrophobic block. Our results provide a molecular-scale view of membrane packing and hydrophobicity, two important properties for creating polymer–protein biomimetic membranes.« less

Thermal degradation behavior and X-ray diffraction studies of chitosan based polyurethane bio-nanocomposites using different diisocyanates.

PubMed

Javaid, Muhammad Asif; Rizwan, Muhammad; Khera, Rasheed Ahmad; Zia, Khalid Mahmood; Saito, Kei; Zuber, Muhammad; Iqbal, Javed; Langer, Peter

2018-05-29

Five different samples of chitosan based polyurethane bio-nanocomposites (PUBNCs) were synthesized by step growth polymerization technique. Five different diisocyanates were used by keeping hydroxyl terminated polybutadiene (HTPB)/1,4-butane diol (1,4-BDO)/chitosan (CS) and montmorillonite (MMT) clay ratios constant (PUR1-PUR5). For comparative studies, PUR-6 was prepared without CS and clay components. Molecular characterizations of polyurethane (PU) films were carried out by FTIR and NMR which was found to have confirmatory evidence of the proposed structures. X-ray diffraction angles (2θ), d-spacing and intensities of chitosan based samples (PUR1-PUR5) and PUR-6 indicated that crystalline behavior of PUBNCs is influenced by varying diisocyanate structures. TGA/DTA results revealed that chitosan increased thermal stability of PU samples; it also enhanced the mechanical strength and decreased the glass transition temperature (T g ) of all the samples. Based on the above mentioned facts this study suggests the best usage of PUs according to the operational and environmental conditions. Copyright © 2018 Elsevier B.V. All rights reserved.

Mechanical Behavior and Fatigue Studies of Rubber Components Used in Tracked Vehicles

DTIC Science & Technology

2010-08-17

durability to this elastomers and polybutadiene is rubber , which gives rubber -like properties. SBR has good abrasion resistance and good aging ...SIMULATION, TESTING AND VALIDATION (MSTV) MINI-SYMPOSIUM AUGUST 17-19 DEARBORN, MICHIGAN MECHANICAL BEHAVIOR AND FATIGUE STUDIES OF RUBBER COMPONENTS USED...Analytics Group US Army TARDEC Warren, MI ABSTRACT In this study, a styrene butadiene rubber , which is similar to the rubber used in road wheel

Role of Amines in Adhesion of Polybutadiene to Glass Substrates. II. Reactions of Amines with Triethylsilanol and/or Fumed Silica.

DTIC Science & Technology

1982-10-01

Schmidt I Dr. F. Roberto 1 Assistant Secretary of the Navy Code AFRPL MKPA (RE, and S) Room SE 731 Edwards AFE, CA 93523 Pentagon Washington, D.C...Force Office of’Sctentific Office of Naval Research Research odie 43 vDirectorate of Chemical Sciences CodeA l V 22217 " Bolling Air Force Base Arlington

Detectability of Delaminations in Solid Rocket Motors with Embedded Stress Sensors

DTIC Science & Technology

2011-10-14

composite grain of hydroxyl-terminated polybutadiene/ammonium perchlorate (HTPB/AP). The insulation layer is ethylene propylene diene monomer ( EPDM ...The temperature-dependent mechanical properties of HTPB/AP and EPDM were obtained from in-house testing at AFRL/RZSM (Edwards AFB). The motor case is...temperature (DBST) sensors and Greg Yandek of AFRL/RZSM for the data collection of EPDM insulation material. Distribution A: Approved for public

Preparation and characterization of mono- and multilayer films of polymerizable 1,2-polybutadiene using the Langmuir-Blodgett technique.

PubMed

Hitrik, Maria; Gutkin, Vitaly; Lev, Ovadia; Mandler, Daniel

2011-10-04

The essence of this study is to apply the Langmuir-Blodgett (LB) technique for assembling asymmetric membranes. Accordingly, Langmuir films of a (further) polymerizable polymer, 1,2-polybutadiene (1,2-pbd), were studied and transferred onto different solid supports, such as gold, indium tin oxide (ITO), and silicon. The layers were characterized both at the air/water interface as well as on different substrates using numerous methods including cyclic voltammetry, impedance spectroscopy, spectroscopic ellipsometry, atomic force microscopy, X-ray photoelectron spectroscopy, and reflection-absorption Fourier transform infrared spectroscopy. The Langmuir films were stable at the air-water interface as long as they were not exposed to UV irradiation. The LB films formed disorganized layers, which gradually blocked the permeation of different species with increasing the number of deposited layers. The thickness was ca. 4-7 Å per layer. Irradiating the Langmuir films caused their cross-linking at the air-water interface. Furthermore, we took advantage of the reactivity of the double bond of the LB films on the solid supports and graft polymerized acrylic acid on top of the 1,2-pbd layers. This approach is the basis of the formation of an asymmetric membrane that requires different porosity on both of its sides. © 2011 American Chemical Society

Synthesis and Characterization of High Energy Polymers.

DTIC Science & Technology

1981-03-31

have been poly(cis-l ,4-butadiene), CTBN , and HTPB I=1s of nitrated and DD I JA 7 1473 EDITION OF I NOV 45 1& OBSOLETE SE1CURITY CLAIISIFI1 TIN Of...cis- butadiene), PB, carboxy-tenninated poly(butadiene-co-acrylonitrile), CTBN and hydroxy-terminated poly(butadiene), HTPB. For the nitration of...evaluation. Progress Report I. Nitration of Diene Polymers and Cgolymers A. Nitromercuration of Carboxy-terminated Butadiene Acrylonitrile Copolymer ( CTBN

Unveiling the hybrid interface in polymer nanocomposites enclosing silsesquioxanes with tunable molecular structure: Spectroscopic, thermal and mechanical properties.

PubMed

D'Arienzo, Massimiliano; Diré, Sandra; Redaelli, Matteo; Borovin, Evgeny; Callone, Emanuela; Di Credico, Barbara; Morazzoni, Franca; Pegoretti, Alessandro; Scotti, Roberto

2018-02-15

Organic-inorganic nanobuilding blocks (NBBs) based on silsesquioxanes (SSQs) have potential applications as nanofillers, thermal stabilizers, and rheological modifiers, which can improve thermomechanical properties of polymer hosts. The possibility to tune both siloxane structure and pendant groups can promote compatibilization and peculiar interactions with a plethora of polymers. However, the control on SSQs molecular architecture and functionalities is usually delicate and requires careful synthetic details. Moreover, investigating the influence of NBBs loading and structure on the hybrid interface and, in turn, on the polymer chains mobility and mechanical properties, may be challenging, especially for low-loaded materials. Herein, we describe the preparation and characterization of polybutadiene (PB) nanocomposites using as innovative fillers thiol-functionalized SSQs nanobuilding blocks (SH-NBBs), with both tailorable functionality and structure. Swelling experiments and, more clearly, solid-state NMR, enlightened a remarkable effect of SH-NBBs on the molecular structure and mobility of the polymeric chains, envisaging the occurrence of chemical interactions at the hybrid interface. Finally, thermal and DMTA analyses revealed that nanocomposites, even containing very low filler loadings (i.e. 1, 3 wt%), exhibited enhanced thermomechanical properties, which seem to be connected not only to the loading, but also to the peculiar cage or ladder-like architecture of SH-NBBs. Copyright © 2017 Elsevier Inc. All rights reserved.

Closed-loop thrust and pressure profile throttling of a nitrous oxide/hydroxyl-terminated polybutadiene hybrid rocket motor

NASA Astrophysics Data System (ADS)

Peterson, Zachary W.

Hybrid motors that employ non-toxic, non-explosive components with a liquid oxidizer and a solid hydrocarbon fuel grain have inherently safe operating characteristics. The inherent safety of hybrid rocket motors offers the potential to greatly reduce overall operating costs. Another key advantage of hybrid rocket motors is the potential for in-flight shutdown, restart, and throttle by controlling the pressure drop between the oxidizer tank and the injector. This research designed, developed, and ground tested a closed-loop throttle controller for a hybrid rocket motor using nitrous oxide and hydroxyl-terminated polybutadiene as propellants. The research simultaneously developed closed-loop throttle algorithms and lab scale motor hardware to evaluate the fidelity of the throttle simulations and algorithms. Initial open-loop motor tests were performed to better classify system parameters and to validate motor performance values. Deep-throttle open-loop tests evaluated limits of stable thrust that can be achieved on the test hardware. Open-loop tests demonstrated the ability to throttle the motor to less than 10% of maximum thrust with little reduction in effective specific impulse and acoustical stability. Following the open-loop development, closed-loop, hardware-in-the-loop tests were performed. The closed-loop controller successfully tracked prescribed step and ramp command profiles with a high degree of fidelity. Steady-state accuracy was greatly improved over uncontrolled thrust.

Modeling and simulation of the debonding process of composite solid propellants

NASA Astrophysics Data System (ADS)

Feng, Tao; Xu, Jin-sheng; Han, Long; Chen, Xiong

2017-07-01

In order to study the damage evolution law of composite solid propellants, the molecular dynamics particle filled algorithm was used to establish the mesoscopic structure model of HTPB(Hydroxyl-terminated polybutadiene) propellants. The cohesive element method was employed for the adhesion interface between AP(Ammonium perchlorate) particle and HTPB matrix and the bilinear cohesive zone model was used to describe the mechanical response of the interface elements. The inversion analysis method based on Hooke-Jeeves optimization algorithm was employed to identify the parameters of cohesive zone model(CZM) of the particle/binder interface. Then, the optimized parameters were applied to the commercial finite element software ABAQUS to simulate the damage evolution process for AP particle and HTPB matrix, including the initiation, development, gathering and macroscopic crack. Finally, the stress-strain simulation curve was compared with the experiment curves. The result shows that the bilinear cohesive zone model can accurately describe the debonding and fracture process between the AP particles and HTPB matrix under the uniaxial tension loading.

Raman spectroscopy combined with principle component analysis to investigate the aging of high energy materials

NASA Astrophysics Data System (ADS)

Farhadian, A. H.; Kavosh Tehrani, M.; Keshavarz, M. H.; Darbani, S. M. R.

2017-07-01

This paper attempts to investigate the possibility of using Raman spectroscopy for aged solid composite propellants. Propellant samples was prepared and aged by an accelerated mechanism in three different temperatures (50, 60 and 70 °C) and times. In the Raman spectrum of the unaged sample, vibrational modes of all structural substances consisting of hydroxyl-terminated polybutadiene as a binder, ammonium perchlorate (AP) as an oxidizer and aluminum as a metal fuel were observed. Comparison of the spectra of the aged samples shows the changes of several peaks with increasing aging times. The important changes are the elimination of NH3+ mode and intensity reduction of CH2 modes, which can be attributed to oxidative cross linking phenomena due to AP decomposition in the chemical structure. Intensity ratios of C-C, C=C and CH2 have been changed with aging and cross linking so that C=C bonds are converted into C-C bonds, as well as the intensity of CH2 modes, was decreased. A principle component analysis method is implemented in order to use all ranges of the spectrum and better discrimination of the samples, which show good results.

Micromechanics of Fracture in Elastomers

DTIC Science & Technology

1984-02-01

Rubber Company), 100; dicumyl peroxide, 0.05. Heated for 120 min at 150*C. B: Polybutadiene, 100; dicuinyl peroxide, 0.2. Heated for 120 min at 150WC. C...1473 EDITION OP I NOV 68 15 OSSOLE S/ N 0 102. LP- 0 14- 6601 SECURITY CLASSIFICATION OF THIS PAGE (ften Date RM010 * SECURITY CLSIICTO OFTI- AG -We at...0.1 to 1 mm (2, 3). Roughness on a still larger scale has been observed under certain conditions of tearing in rubber reinforced with carbon black

Lipid-absorbing Polymers

NASA Technical Reports Server (NTRS)

Marsh, H. E., Jr.; Wallace, C. J.

1973-01-01

The removal of bile acids and cholesterol by polymeric absorption is discussed in terms of micelle-polymer interaction. The results obtained with a polymer composed of 75 parts PEO and 25 parts PB plus curing ingredients show an absorption of 305 to 309%, based on original polymer weight. Particle size effects on absorption rate are analyzed. It is concluded that crosslinked polyethylene oxide polymers will absorb water, crosslinked polybutadiene polymers will absorb lipids; neither polymer will absorb appreciable amounts of lipids from micellar solutions of lipids in water.

Combustion Mechanisms of Very High Burn Rate (VHBR) Propellant. Phase II.

DTIC Science & Technology

1995-09-01

potassium salt of B10H1 2-. The Kraton slate and the Hycar slate both contain RDX as the oxidizer, while the PEG slate contains HMX and TAGN in the... polyacrylate (Hycar), hydroxy-terminated polybutadiene, and a mixture of styrene and ethylene-butylene (Kraton). As might be expected, when all else is equal...proprietary formulations of Teledyne-McCormick-Selph (TMS), designated H498 and H466. In H498, a potassium cation is utilized, while in H466, an

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patterson, Brian M.; Cordes, Nikolaus Lynn; Tappan, Bryce C.

HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) is a powerful high explosive that is routinely used in formulations such as PBX 9501. Much remains to be learned about the performance and mechanical properties of HMX formulations such as these, particularly after dynamic damage has occurred. We have prepared formulations with HMX using hydroxyl terminated polybutadiene (HTPB) binder in order to form an explosive that is relatively insensitive to mild stimuli, analogous to PBXB-110 (different only is substitution of dioctyladipate (DO) for isodecyl pelargonate).

Effects of cross-links, pressure and temperature on the thermal properties and glass transition behaviour of polybutadiene.

PubMed

Tonpheng, Bounphanh; Yu, Junchun; Andersson, Ove

2011-09-07

The thermal conductivity κ, heat capacity per unit volume ρc(p) and glass transition behaviour under pressure have been established for medium and high vinyl content polybutadiene PB with molecular weights 2600 and 100,000 and their highly cross-linked (ebonite) states obtained purely by high-pressure high-temperature treatments. Cross-linking eliminates the glass transitions and increases κ by as much as 50% at 295 K and 1 atm, and decreases ρc(p) to a limiting level close to that of the glassy state of PB, which is reached before the ultimate cross-link density is achieved. The pressure and temperature behaviours of κ are strongly changed by cross-links, which increases the effect of temperature but decreases the effect of pressure. We attribute these changes to a cross-linked induced permanent densification and consequential increase of phonon velocity simultaneously as conduction along polymer chains is disrupted. The glass transition temperatures for a time scale of 1 s are described to within 0.5 K by: T(g)(p) = 202.5 (1 + 2.94 p)(0.286) and T(g)(p) = 272.3 (1 + 2.57 p)(0.233) (p in GPa and T in K) up to 1 GPa, for PB2600 and PB100000, respectively, and can be estimated for medium and high vinyl content PBs with molecular weights in between by a constant, pressure independent, shift in temperature. This journal is © the Owner Societies 2011

Grafting poly(vinyl alcohol) onto polybutadiene rubber latex particles by pre-irradiation

NASA Astrophysics Data System (ADS)

Tian, Bo; Dong, Wei; Liu, Yuguang

2017-06-01

Poly(vinyl alcohol) (PVA) was grafted on polybutadiene rubber latex (PBL) particles (PB-g-PVA) by pre-irradiation via emulsion grafting copolymerization. The grafting degree (G%) increased almost linearly with the reaction time and the weight ratio of PVA to the PB latex, while decreased gradually when the irradiation dose is over 30 kGy and the reaction temperature is higher than 60 °C. The grafting efficiency (GE%) has the same trend of the G% but the weight ratio of PVA to PBL, GE% decreased with increasing of PVA adding to PB latex. FTIR spectroscopy indicated that the PVA was grafted onto the PB particles. The dynamic light scattering measurement showed that the particle size of PB-g-PVA particles was larger than that of the pristine PBL particles, and it increased with increment of G%. Transmission electron microscopy images of the PB-g-PVA latex particles demonstrated that the size of PB-g-PVA particle was enlarged by the layer of grafted PVA surrounding the PBL particles. Thermal behavior exhibited the phase separation in the PB-g-PVA films, Tg1 and Tg2 related to the PB and PVA respectively, both of which shifted to a higher temperature with increasing of G%, but the Tg2 was still lower than that of the virgin PVA. The increment of the surface free energy of PB-g-PVA films was attributed to the incorporation of the polar PVA, which also resulted in improvement of the hydrophilic properties.

Rough Evaluation Structure: Application of Rough Set Theory to Generate Simple Rules for Inconsistent Preference Relation

NASA Astrophysics Data System (ADS)

Gehrmann, Andreas; Nagai, Yoshimitsu; Yoshida, Osamu; Ishizu, Syohei

Since management decision-making becomes complex and preferences of the decision-maker frequently becomes inconsistent, multi-attribute decision-making problems were studied. To represent inconsistent preference relation, the concept of evaluation structure was introduced. We can generate simple rules to represent inconsistent preference relation by the evaluation structures. Further rough set theory for the preference relation was studied and the concept of approximation was introduced. One of our main aims of this paper is to introduce a concept of rough evaluation structure for representing inconsistent preference relation. We apply rough set theory to the evaluation structure, and develop a method for generating simple rules for inconsistent preference relations. In this paper, we introduce concepts of totally ordered information system, similarity class of preference relation, upper and lower approximation of preference relations. We also show the properties of rough evaluation structure and provide a simple example. As an application of rough evaluation structure, we analyze questionnaire survey of customer preferences about audio players.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saunders, C.B.; Carmichael, A.A.; Kremers, W.

The mechanical and physical properties of electron-beam (EB) curable carbon-fiber-reinforced composites were investigated, using a resin matrix made from a mixture of 50 percent of an epoxy diacrylate oligomer, 30 percent of a polybutadiene diacrylate oligomer, and 20 percent of dipentaerythritol monohydroxypentaacrylate monomer, and applying varying EB doses for curing the mixture. It was found that the gel content in the cured prepreg polymer depended upon the total EB dose below 50 kGy, the dose rate, and, at a low dose of 16 kGy/hr, on the atmosphere and pressure during irradiation. 14 refs.

Highly Stretchable Superhydrophobic Composite Coating Based on Self-Adaptive Deformation of Hierarchical Structures.

PubMed

Hu, Xin; Tang, Changyu; He, Zhoukun; Shao, Hong; Xu, Keqin; Mei, Jun; Lau, Woon-Ming

2017-05-01

With the rapid development of stretchable electronics, functional textiles, and flexible sensors, water-proof protection materials are required to be built on various highly flexible substrates. However, maintaining the antiwetting of superhydrophobic surface under stretching is still a big challenge since the hierarchical structures at hybridized micro-nanoscales are easily damaged following large deformation of the substrates. This study reports a highly stretchable and mechanically stable superhydrophobic surface prepared by a facile spray coating of carbon black/polybutadiene elastomeric composite on a rubber substrate followed by thermal curing. The resulting composite coating can maintain its superhydrophobic property (water contact angle ≈170° and sliding angle <4°) at an extremely large stretching strain of up to 1000% and can withstand 1000 stretching-releasing cycles without losing its superhydrophobic property. Furthermore, the experimental observation and modeling analysis reveal that the stable superhydrophobic properties of the composite coating are attributed to the unique self-adaptive deformation ability of 3D hierarchical roughness of the composite coating, which delays the Cassie-Wenzel transition of surface wetting. In addition, it is first observed that the damaged coating can automatically recover its superhydrophobicity via a simple stretching treatment without incorporating additional hydrophobic materials. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Atomic-Scale Theoretical Studies of Fundamental Properties and Processes in CHNO Plastic-Bonded Explosive Constituent Materials under Static and Dynamic Compression

NASA Astrophysics Data System (ADS)

Sewell, Thomas

2013-06-01

The results of recent theoretical atomic-scale studies of CHNO plastic-bonded explosive constituent materials will be presented, emphasizing the effects of static and dynamic compression on structure, vibrational spectroscopy, energy redistribution, and dynamic deformation processes. Among the chemical compounds to be discussed are pentaerythritol tetranitrate (PETN), hexahydro-1,3,5-trinitro-1,3,5-s-triazine (RDX), nitromethane, and hydroxyl-terminated polybutadiene (HTPB). Specific topics to be discussed include pressure-dependent terahertz IR absorption spectra in crystalline PETN and RDX, microscopic material flow characteristics and energy localization during and after pore collapse in shocked (100)-oriented RDX, establishment of local thermodynamic temperature and the approach to thermal equilibrium in shocked (100)-oriented nitromethane, and structural changes and relaxation phenomena that occur in shocked amorphous cis-HTPB. In the case of shocked HTPB, comparisons will be made between results obtained using fully-atomic and coarse-grained (united atom) molecular dynamics force field models. Rather than attempting to discuss any given topic in extended detail, 3-4 vignettes will be presented that highlight outstanding scientific questions and the predictive methods and tools we are developing to answer them. The U.S. Defense Threat Reduction Agency and Office of Naval Research supported this research.

Morphology of Thermally Degraded PU and Irradiated PE

NASA Astrophysics Data System (ADS)

Harris, Douglas; Gillen, Kenneth; Celina, Mathias; Assink, Roger

2001-03-01

Several 1H and 13C NMR techniques have been applied to study the morphology and chemical structure of thermally degraded polyurethane rubber and irradiated polyethylene cable insulation. The combination of heat and presence of air results in oxidation of the hydroxyl-terminated polybutadiene/isophorone diisocyanate polyurethane and the gel content increases. The oxidation is inhomogeneous: pristine regions remain with a length scale of approximately 20 nm. The morphology and oxidation products were characterized by 1H spin diffusion with 13C detection. In addition, dynamics were probed with 1H and 2D WISE experiments. Radiation of cross-linked polyethylene cable insulation obeys anomalous aging behavior where lower temperature can result in a greater loss in ultimate tensile elongation. Annealing of the irradiated polyethylene allows significant recovery of mechanical properties. Analysis of 13C NMR data was used to study this "Lazarus effect" and the inverse temperature relationship. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under Contract DE-AC04-94AL8500.

MAGDM linear-programming models with distinct uncertain preference structures.

PubMed

Xu, Zeshui S; Chen, Jian

2008-10-01

Group decision making with preference information on alternatives is an interesting and important research topic which has been receiving more and more attention in recent years. The purpose of this paper is to investigate multiple-attribute group decision-making (MAGDM) problems with distinct uncertain preference structures. We develop some linear-programming models for dealing with the MAGDM problems, where the information about attribute weights is incomplete, and the decision makers have their preferences on alternatives. The provided preference information can be represented in the following three distinct uncertain preference structures: 1) interval utility values; 2) interval fuzzy preference relations; and 3) interval multiplicative preference relations. We first establish some linear-programming models based on decision matrix and each of the distinct uncertain preference structures and, then, develop some linear-programming models to integrate all three structures of subjective uncertain preference information provided by the decision makers and the objective information depicted in the decision matrix. Furthermore, we propose a simple and straightforward approach in ranking and selecting the given alternatives. It is worth pointing out that the developed models can also be used to deal with the situations where the three distinct uncertain preference structures are reduced to the traditional ones, i.e., utility values, fuzzy preference relations, and multiplicative preference relations. Finally, we use a practical example to illustrate in detail the calculation process of the developed approach.

Relaxation processes and glass transition of confined polymer melts: A molecular dynamics simulation of 1,4-polybutadiene between graphite walls.

PubMed

Solar, M; Binder, K; Paul, W

2017-05-28

Molecular dynamics simulations of a chemically realistic model for 1,4-polybutadiene in a thin film geometry confined by two graphite walls are presented. Previous work on melts in the bulk has shown that the model faithfully reproduces static and dynamic properties of the real material over a wide temperature range. The present work studies how these properties change due to nano-confinement. The focus is on orientational correlations observable in nuclear magnetic resonance experiments and on the local intermediate incoherent neutron scattering function, F s (q z , z, t), for distances z from the graphite walls in the range of a few nanometers. Temperatures from about 2T g down to about 1.15T g , where T g is the glass transition temperature in the bulk, are studied. It is shown that weakly attractive forces between the wall atoms and the monomers suffice to effectively bind a polymer coil that is near the wall. For a wide regime of temperatures, the Arrhenius-like adsorption/desorption kinetics of the monomers is the slowest process, while very close to T g the Vogel-Fulcher-Tammann-like α-relaxation takes over. The α-process is modified only for z≤1.2 nm due to the density changes near the walls, less than expected from studies of coarse-grained (bead-spring-type) models. The weakness of the surface effects on the glass transition in this case is attributed to the interplay of density changes near the wall with the torsional potential. A brief discussion of pertinent experiments is given.

The Vocational Preference Inventory Scores and Environmental Preferences

ERIC Educational Resources Information Center

Kunce, Joseph T.; Kappes, Bruno Maurice

1976-01-01

This study investigated the relationship between vocational interest measured by the Vocational Preference Inventory (VPI) and preferences of 175 undergraduates for structured or unstructured environments. Males having clear-cut preferences for structured situations had significantly higher Realistic-Conventional scores than those without…

Ultrasonic degradation of butadiene, styrene and their copolymers.

PubMed

Sathiskumar, P S; Madras, Giridhar

2012-05-01

Ultrasonic degradation of commercially important polymers, styrene-butadiene (SBR) rubber, acrylonitrile-butadiene (NBR) rubber, styrene-acrylonitrile (SAN), polybutadiene rubber and polystyrene were investigated. The molecular weight distributions were measured using gel permeation chromatography (GPC). A model based on continuous distribution kinetics approach was used to study the time evolution of molecular weight distribution for these polymers during degradation. The effect of solvent properties and ultrasound intensity on the degradation of SBR rubber was investigated using different pure solvents and mixed solvents of varying volatility and different ultrasonic intensities. Copyright © 2011 Elsevier B.V. All rights reserved.

VIABILITY OF BACILLUS SUBTILIS SPORES IN ROCKET PROPELLANTS.

PubMed

GODDING, R M; LYNCH, V H

1965-01-01

The sporicidal activity of components used in liquid and solid rocket propellants was tested by use of spores of Bacillus subtilis dried on powdered glass. Liquid propellant ingredients tested were N(2)O(4), monomethylhydrazine and 1,1-dimethylhydrazine. N(2)O(4) was immediately sporicidal; the hydrazines were effective within several days. Solid propellants consisted of ammonium perchlorate in combination with epoxy resin (EPON 828), tris-1-(2-methyl) aziridinyl phosphine oxide, bis-1-(2-methyl) aziridinyl phenylphosphine oxide, and three modified polybutadiene polymers. There was no indication of appreciable sporicidal activity of these components.

The Damage Law of HTPB Propellant under Thermomechanical Loading

NASA Astrophysics Data System (ADS)

Liu, Cheng-wu; Yang, Jian-hong; Wang, Xian-meng; Ma, Yong-kang

2016-01-01

By way of measuring the acoustic emission (AE) signals of Hydroxyl-terminated polybutadiene (HTPB) propellant in condition of uniform speed, and combined with the scanning electron microscopy (SEM) fracture surface observation, the damage law of HTPB composite solid propellant under thermomechanical loading was studied. The results show that the effects of thermomechanical loading on HTPB propellant are related to the time and can be divided into three different stages. In the first stage, thermal air aging dominates; in the second stage, interface damage is dominant; and in the third stage, thermal air aging is once again dominant.

Viability of Bacillus subtilis Spores in Rocket Propellants

PubMed Central

Godding, Rogene M.; Lynch, Victoria H.

1965-01-01

The sporicidal activity of components used in liquid and solid rocket propellants was tested by use of spores of Bacillus subtilis dried on powdered glass. Liquid propellant ingredients tested were N2O4, monomethylhydrazine and 1,1-dimethylhydrazine. N2O4 was immediately sporicidal; the hydrazines were effective within several days. Solid propellants consisted of ammonium perchlorate in combination with epoxy resin (EPON 828), tris-1-(2-methyl) aziridinyl phosphine oxide, bis-1-(2-methyl) aziridinyl phenylphosphine oxide, and three modified polybutadiene polymers. There was no indication of appreciable sporicidal activity of these components. PMID:14264838

Lyotropic Phase Behavior of Polybutadiene-Poly(ethylene oxide) Diblock Copolymers in Ionic Liquids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simone, Peter M.; Lodge, Timothy P.

2008-08-26

The lyotropic phase behavior of three poly(1,2-butadiene-b-ethylene oxide) diblock copolymers (PB-PEO) with different monomer volume fractions has been studied in two different ionic liquids, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMI][TFSI]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMI][PF{sub 6}]), across the complete concentration range. The ordered microstructures present in the solutions were characterized via small-angle X-ray scattering (SAXS). The phase diagrams for the PB-PEO/ionic liquid solutions include regions corresponding to the classical copolymer microstructures: body-centered-cubic lattices of spheres, hexagonally ordered cylinders, and lamellae. Additionally, the phase diagrams also include wide regions of coexisting microstructures and regions apparently corresponding to a disordered network microstructure. The phase behavior ofmore » the PB-PEO copolymers in both ionic liquids was comparable to their previously reported aqueous solution behavior. The temperature dependence of the phase diagrams was very modest, indicative of a highly segregated system. The level of solvent selectivity was also investigated via cryogenic transmission electron microscopy (cryo-TEM) on dilute solutions. On the basis of the morphology of the dilute solution copolymer aggregate structures in the ionic liquid solvents, and on the structural length scales of the concentrated solutions, it was concluded that for PB-PEO [BMI][PF{sub 6}] behaves as a more selective solvent than [EMI][TFSI].« less

Infants prefer the musical meter of their own culture: a cross-cultural comparison.

PubMed

Soley, Gaye; Hannon, Erin E

2010-01-01

Infants prefer native structures such as familiar faces and languages. Music is a universal human activity containing structures that vary cross-culturally. For example, Western music has temporally regular metric structures, whereas music of the Balkans (e.g., Bulgaria, Macedonia, Turkey) can have both regular and irregular structures. We presented 4- to 8-month-old American and Turkish infants with contrasting melodies to determine whether cultural background would influence their preferences for musical meter. In Experiment 1, American infants preferred Western over Balkan meter, whereas Turkish infants, who were familiar with both Western and Balkan meters, exhibited no preference. Experiments 2 and 3 presented infants with either a Western or Balkan meter paired with an arbitrary rhythm with complex ratios not common to any musical culture. Both Turkish and American infants preferred Western and Balkan meter to an arbitrary meter. Infants' musical preferences appear to be driven by culture-specific experience and a culture-general preference for simplicity. Copyright 2009 APA, all rights reserved.

Transmission electron microscopy of polymer blends and block copolymers

NASA Astrophysics Data System (ADS)

Gomez, Enrique Daniel

Transmission electron microscopy (TEM) of soft matter is a field that warrants further investigation. Developments in sample preparation, imaging and spectroscopic techniques could lead to novel experiments that may further our understanding of the structure and the role structure plays in the functionality of various organic materials. Unlike most hard materials, TEM of organic molecules is limited by the amount of radiation damage the material can withstand without changing its structure. Despite this limitation, TEM has been and will be a powerful tool to study polymeric materials and other soft matter. In this dissertation, an introduction of TEM for polymer scientists is presented. The fundamentals of interactions of electrons with matter are described using the Schrodinger wave equation and scattering cross-sections to fully encompass coherent and incoherent scattering. The intensity, which is the product of the wave function and its complex conjugate, shows no perceptible change due to the sample. Instead, contrast is generated through the optical system of the microscope by removing scattered electrons or by generating interference due to material-induced phase changes. Perhaps the most challenging aspect of taking TEM images, however, is sample preparation, because TEM experiments require materials with approximately 50 nm thickness. Although ultramicrotomy is a well-established powerful tool for preparing biological and polymeric sections for TEM, the development of cryogenic Focused Ion Beam may enable unprecedented cross-sectional TEM studies of polymer thin films on arbitrary substrates with nanometer precision. Two examples of TEM experiments of polymeric materials are presented. The first involves quantifying the composition profile across a lamellar phase obtained in a multicomponent blend of saturated poly(butadiene) and poly(isobutylene), stabilized by a saturated poly(butadiene) copolymer serving as a surfactant, using TEM and self-consistent field theory (SCFT). The liquid-like nature of this system at room temperature makes traditional staining methods for the enhancement of contrast ineffective. As an alternative, we take advantage of the large inelastic scattering cross-section of soft materials to generate contrast in zero-loss TEM images. Independent spatially resolved thickness measurements enable quantification of electron scattering. This enabled a comparison between the TEM data and predictions based on SCFT without any adjustable parameters. The second example involves the utilization of energy-filtered transmission electron microscopy (EFTEM) to compute elemental maps by taking advantage of ionization events. Elemental mapping of lithium is used to determine the distribution of salt in nanostructured poly(styrene-block-ethylene oxide) (SEO) copolymer/lithium salt electrolytes. Surprisingly, the concentration of lithium within a poly(ethylene oxide) (PEO) domain is found to be inhomogeneous; the salt is localized to the middle of the channels. Self-consistent field theory simulations suggest that localization of lithium is due to chain stretching at the interface, which increases with molecular weight. EFTEM and SCFT results show that the segregation of lithium salt to the middle of the PEO lamellae is greater for higher molecular weight polymers. This is correlated with the ionic conductivity of the copolymer electrolyte, which is found to show a higher conductivity for thinner lithium lamellae.

Listening, Watching, and Reading: The Structure and Correlates of Entertainment Preferences

PubMed Central

Rentfrow, Peter J.; Goldberg, Lewis R.; Zilca, Ran

2010-01-01

People spend considerable amounts of time and money listening to music, watching TV and movies, and reading books and magazines, yet almost no attention in psychology has been devoted to understanding individual differences in preferences for such entertainment. The present research was designed to examine the structure and correlates of entertainment genre preferences. Analyses of the genre preferences of over 3,000 individuals revealed a remarkably clear factor structure. Using multiple samples, methods, and geographic regions, data converged to reveal five entertainment-preference dimensions: Communal, Aesthetic, Dark, Thrilling, and Cerebral. Preferences for these entertainment dimensions were uniquely related to demographics and personality traits. Results also indicated that personality accounted for significant proportions of variance in entertainment preferences over and above demographics. The results provide a foundation for developing and testing hypotheses about the psychology of entertainment preferences. PMID:20649744

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saunders, C.B.; Dickson, L.W.; Singh, A.

A radiation-curable prepreg designed to meet the specifications set by a major aircraft company is described. The resin, consisting of a mixture of an epoxy diacrylate, polybutadiene diacrylate, and a multifunctional monomer, was used to impregnate a plain weave carbon fabric by a solvent process. The cured polymer, produced by irradiation in air to a dose of 40 kGy, is amorphous, with a gel fraction of 85 percent. The linear thermal expansion coefficient of the polymer was found to be 0.00017 m/m deg C from 25 to 150 C; it was not affected by varying the applied irradiation dose frommore » 30 to 50 kGy. 14 references.« less

Listening, watching, and reading: the structure and correlates of entertainment preferences.

PubMed

Rentfrow, Peter J; Goldberg, Lewis R; Zilca, Ran

2011-04-01

People spend considerable amounts of time and money listening to music, watching TV and movies, and reading books and magazines, yet almost no attention in psychology has been devoted to understanding individual differences in preferences for such entertainment. The present research was designed to examine the structure and correlates of entertainment genre preferences. Analyses of the genre preferences of more than 3,000 individuals revealed a remarkably clear factor structure. Using multiple samples, methods, and geographic regions, data converged to reveal five entertainment-preference dimensions: Communal, Aesthetic, Dark, Thrilling, and Cerebral. Preferences for these entertainment dimensions were uniquely related to demographics and personality traits. Results also indicated that personality accounted for significant proportions of variance in entertainment preferences over and above demographics. The results provide a foundation for developing and testing hypotheses about the psychology of entertainment preferences. © 2011 The Authors. Journal of Personality © 2011, Wiley Periodicals, Inc.

Game Theory, Conditional Preferences, and Social Influence

PubMed Central

Stirling, Wynn C.; Felin, Teppo

2013-01-01

Neoclassical noncooperative game theory is based on a simple, yet powerful synthesis of mathematical and logical concepts: unconditional and immutable preference orderings and individual rationality. Although this structure has proven useful for characterizing competitive multi-player behavior, its applicability to scenarios involving complex social relationships is problematic. In this paper we directly address this limitation by the introduction of a conditional preference structure that permits players to modulate their preference orderings as functions of the preferences of other players. Embedding this expanded preference structure in a formal and graphical framework provides a systematic approach for characterizing a complex society. The result is an influence network that allows conditional preferences to propagate through the community, resulting in an emergent social model which characterizes all of the social relationships that exist and which leads to solution concepts that account for both group and individual interests. The Ultimatum game is presented as an example of how social influence can be modeled with conditional preferences. PMID:23451078

Game theory, conditional preferences, and social influence.

PubMed

Stirling, Wynn C; Felin, Teppo

2013-01-01

Neoclassical noncooperative game theory is based on a simple, yet powerful synthesis of mathematical and logical concepts: unconditional and immutable preference orderings and individual rationality. Although this structure has proven useful for characterizing competitive multi-player behavior, its applicability to scenarios involving complex social relationships is problematic. In this paper we directly address this limitation by the introduction of a conditional preference structure that permits players to modulate their preference orderings as functions of the preferences of other players. Embedding this expanded preference structure in a formal and graphical framework provides a systematic approach for characterizing a complex society. The result is an influence network that allows conditional preferences to propagate through the community, resulting in an emergent social model which characterizes all of the social relationships that exist and which leads to solution concepts that account for both group and individual interests. The Ultimatum game is presented as an example of how social influence can be modeled with conditional preferences.

A Combined fMRI and DTI Examination of Functional Language Lateralization and Arcuate Fasciculus Structure: Effects of Degree versus Direction of Hand Preference

ERIC Educational Resources Information Center

Propper, Ruthe E.; O'Donnell, Lauren J.; Whalen, Stephen; Tie, Yanmei; Norton, Isaiah H.; Suarez, Ralph O.; Zollei, Lilla; Radmanesh, Alireza; Golby, Alexandra J.

2010-01-01

The present study examined the relationship between hand preference degree and direction, functional language lateralization in Broca's and Wernicke's areas, and structural measures of the arcuate fasciculus. Results revealed an effect of degree of hand preference on arcuate fasciculus structure, such that consistently-handed individuals,…

Demonstration of a sterilizable solid rocket motor system

NASA Technical Reports Server (NTRS)

Mastrolia, E. J.; Santerre, G. M.; Lambert, W. L.

1975-01-01

A solid propellant rocket motor containing 60.9 Kg (134-lb) of propellant was successfully static fired after being subjected to eight heat sterilization cycles (three 54-hour cycles plus five 40-hour cycles) at 125 C (257 F). The test motor, a modified SVM-3 chamber, incorporated a flexible grain retention system of EPR rubber to relieve thermal shrinkage stresses. The propellant used in the motor was ANB-3438, and 84 wt% solids system (18 wt% aluminum) containing 66 wt% stabilized ammonium perchlorate oxidizer and a saturated hydroxylterminated polybutadiene binder. Bonding of the propellant to the EPR insulation (GenGard V-4030) was provided by the use of SD-886, an epoxy urethane restriction.

New polymer systems: Chain extension by dianhydrides

NASA Technical Reports Server (NTRS)

Rhein, R. A.; Ingham, J. D.

1972-01-01

The results are presented for a systematic investigation on the use of anhydrides to prepare stable elastomeric materials for space use, under mild reaction conditions. The three anhydrides investigated were found to provide effective chain extension of hydroxy-terminated poly(alkylene oxides) and poly(butadienes). These were tetrahydrofuran tetracarboxylic dianhydride, pyromellitic dianhydride, and benzophenone tetracarboxylic diahydride. The most effective catalyst investigated was ferric acetylacetonate, which resulted in chain extension at 333 K (60 C). One feature of these anhydride reactants is that they are difunctional as anhydrides, but tetrafunctional if conditions are selected that lead to reaction of all carboxyl groups. Therefore, chain extension can be effected and then followed by crosslinking via the residual carboxyl groups.

Advances in aluminum powder usage as an energetic material and applications for rocket propellant

NASA Astrophysics Data System (ADS)

Sadeghipour, S.; Ghaderian, J.; Wahid, M. A.

2012-06-01

Energetic materials have been widely used for military purposes. Continuous research programs are performing in the world for the development of the new materials with higher and improved performance comparing with the available ones in order to fulfill the needs of the military in future. Different sizes of aluminum powders are employed to produce composite rocket propellants with the bases of Ammonium Perchlorate (AP) and Hydroxyl-Terminated-Polybutadiene (HTPB) as oxidizer and binder respectively. This paper concentrates on recent advances in using aluminum as an energetic material and the properties and characteristics pertaining to its combustion. Nano-sized aluminum as one of the most attractable particles in propellants is discussed particularly.

Molecular dynamics studies of interpenetrating polymer networks for actuator devices

NASA Astrophysics Data System (ADS)

Brandell, Daniel; Kasemägi, Heiki; Citérin, Johann; Vidal, Frédéric; Chevrot, Claude; Aabloo, Alvo

2008-03-01

Molecular Dynamics (MD) techniques have been used to study the structure and dynamics of a model system of an interpenetrating polymer (IPN) network for actuator devices. The systems simulated were generated using a Monte Carlo-approach, and consisted of poly(ethylene oxide) (PEO) and poly(butadiene) (PB) in a 80-20 percent weight ratio immersed into propylene carbonate (PC) solutions of LiClO 4. The total polymer content was 32%, in order to model experimental conditions. The dependence of LiClO 4 concentration in PC has been studied by studying five different concentrations: 0.25, 0.5, 0.75, 1.0 and 1.25 M. After equilibration, local structural properties and dynamical features such as phase separation, coordination, cluster stability and ion conductivity were studied. In an effort to study the conduction processes more carefully, external electric fields of 1×10 6 V/m and 5×10 6 V/m has been applied to the simulation boxes. A clear relationship between the degree of local phase separation and ion mobility is established. It is also shown that although the ion pairing increases with concentration, there are still significantly more potential charge carriers in the higher concentrated systems, while concentrations around 0.5-0.75 M of LiClO 4 in PC seem to be favorable in terms of ion mobility. Furthermore, the anions exhibit higher conductivity than the cations, and there are tendencies to solvent drag from the PC molecules.

The Influence of Verb-Bound Syntactic Preferences on the Processing of Syntactic Structures

ERIC Educational Resources Information Center

Segaert, Katrien; Weber, Kirsten; Cladder-Micus, Mira; Hagoort, Peter

2014-01-01

Speakers sometimes repeat syntactic structures across sentences, a phenomenon called syntactic priming. We investigated the influence of verb-bound syntactic preferences on syntactic priming effects in response choices and response latencies for German ditransitive sentences. In the response choices we found "inverse preference effects":…

Preferences of group-housed female mice regarding structure of softwood bedding.

PubMed

Kirchner, J; Hackbarth, H; Stelzer, H D; Tsai, P-P

2012-04-01

Bedding influences various parameters in the housing of laboratory mice, such as health, physiology and behaviour (often considered as being integral parts of welfare). Notwithstanding existent studies about bedding preferences of individually tested mice, data about group-housed mice are still lacking. The aim of this study was to find out the structure preference for softwood bedding of group-housed mice. One hundred and eight 8-week-old female mice (C57BL6/JOlaHsd and BALB/cOlaHsd) were housed in groups of three and were given one-week free access to two different bedding structures at a time. In three test combinations, softwood shaving bedding was tested versus softwood chip bedding products of three different particle sizes (fine/medium/coarse-grained). The preference test was performed in a DoubleCage system composed of two Makrolon type IIL cages, connected by a perspex tunnel. This validated system was able to detect the crossings of each individual animal with correct crossing time and direction. On the basis of these data, dwelling times on the particular bedding structures were statistically analysed as a parameter for bedding preferences. In all three test combinations, a highly significant shaving preference was detected. On average, mice spent 70% of their dwelling time on the shavings. This preference was more explicit during the light period and in C57BL/6J mice. The relative ranking of the bedding structures was: shavings > coarse-grained chips > medium chips = fine chips. By means of these results, a shaving structure as bedding can be recommended for laboratory mice, whereas fine chip structures should be avoided.

Facial first impressions and partner preference models: Comparable or distinct underlying structures?

PubMed

South Palomares, Jennifer K; Sutherland, Clare A M; Young, Andrew W

2017-12-17

Given the frequency of relationships nowadays initiated online, where impressions from face photographs may influence relationship initiation, it is important to understand how facial first impressions might be used in such contexts. We therefore examined the applicability of a leading model of verbally expressed partner preferences to impressions derived from real face images and investigated how the factor structure of first impressions based on potential partner preference-related traits might relate to a more general model of facial first impressions. Participants rated 1,000 everyday face photographs on 12 traits selected to represent (Fletcher, et al. 1999, Journal of Personality and Social Psychology, 76, 72) verbal model of partner preferences. Facial trait judgements showed an underlying structure that largely paralleled the tripartite structure of Fletcher et al.'s verbal preference model, regardless of either face gender or participant gender. Furthermore, there was close correspondence between the verbal partner preference model and a more general tripartite model of facial first impressions derived from a different literature (Sutherland et al., 2013, Cognition, 127, 105), suggesting an underlying correspondence between verbal conceptual models of romantic preferences and more general models of facial first impressions. © 2017 The British Psychological Society.

Swarm intelligence application for optimization of CO2 diffusivity in polystyrene-b-polybutadiene-b-polystyrene (SEBS) foaming

NASA Astrophysics Data System (ADS)

Sharudin, Rahida Wati; Ajib, Norshawalina Muhamad; Yusoff, Marina; Ahmad, Mohd Aizad

2017-12-01

Thermoplastic elastomer SEBS foams were prepared by using carbon dioxide (CO2) as a blowing agent and the process is classified as physical foaming method. During the foaming process, the diffusivity of CO2 need to be controlled since it is one of the parameter that will affect the final cellular structure of the foam. Conventionally, the rate of CO2 diffusion was measured experimentally by using a highly sensitive device called magnetic suspension balance (MSB). Besides, this expensive MSB machine is not easily available and measurement of CO2 diffusivity is quite complicated as well as time consuming process. Thus, to overcome these limitations, a computational method was introduced. Particle Swarm Optimization (PSO) is a part of Swarm Intelligence system which acts as a beneficial optimization tool where it can solve most of nonlinear complications. PSO model was developed for predicting the optimum foaming temperature and CO2 diffusion rate in SEBS foam. Results obtained by PSO model are compared with experimental results for CO2 diffusivity at various foaming temperature. It is shown that predicted optimum foaming temperature at 154.6 °C was not represented the best temperature for foaming as the cellular structure of SEBS foamed at corresponding temperature consisted pores with unstable dimension and the structure was not visibly perceived due to foam shrinkage. The predictions were not agreed well with experimental result when single parameter of CO2 diffusivity is considered in PSO model because it is not the only factor that affected the controllability of foam shrinkage. The modification on the PSO model by considering CO2 solubility and rigidity of SEBS as additional parameters needs to be done for obtaining the optimum temperature for SEBS foaming. Hence stable SEBS foam could be prepared.

Largely improved the low temperature toughness of acrylonitrile-styrene-acrylate (ASA) resin: Fabricated a core-shell structure of two elastomers through the differences of interfacial tensions

NASA Astrophysics Data System (ADS)

Mao, Zepeng; Zhang, Jun

2018-06-01

The phase morphology of two elastomers (i.e., chlorinated polyethylene (CPE) and polybutadiene rubber (BR)) were devised to be a core-shell structure in acrylonitrile-styrene-acrylate (ASA) resin matrix, via the interfacial tension differences of polymer pairs. Selective extraction test and scanning electron microscopy (SEM) were utilized to verify this special phase morphology. The results demonstrated that the core-shell structure, BR core and CPE shell, significantly contributed to improve the low temperature toughness of ASA/CPE/BR ternary blends, which may be because the nonpolar BR core was segregated from polar ASA by the CPE shell. The CPE shell served dual functions: Not only did it play compatibilizing effect in the interface between BR and ASA matrix, but it also toughened the blends at 25 and 0 °C. The blends of ASA/CPE/BR (100/27/3, w/w/w) and ASA/CPE/BR (100/22/8, w/w/w) showed the peak impact strengths at about 28 and 9 kJ/m2 at 0 and -30 °C, respectively, which were higher than both that of ASA/CPE/BR (100/30/0, w/w/w) and ASA/CPE/BR (100/0/30, w/w/w). Moreover, the impact strength of ternary blends at room temperature kept at 40 kJ/m2 when BR content was lower than 10 phr. Other characterizations including contact angle measurement, dynamic mechanical thermal analysis (DMTA), morphology of impact-fractured surfaces, tensile properties, flexural properties, and Fourier transform infrared spectroscopy (FTIR) were measured as well.

Body Aesthetic Preference in Preschoolers and Attraction to Canons Violation: An Exploratory Study.

PubMed

Di Dio, Cinzia; Berchio, Cristina; Massaro, Davide; Lombardi, Elisabetta; Gilli, Gabriella; Marchetti, Antonella

2017-01-01

Sensitivity to canons of beauty as represented in the human body-and as typically defined in the Western Culture-has been poorly studied in children. Current literature shows that infants as young as about three months are sensitive to the human body structure and its parts. Using a sample of 54 three- to five-year-old children, the present study investigated preference for drawings representing the "canonical" body structure, contrasting these with drawings showing the same bodies, but where the relation between trunk and legs was modified. It was hypothesized that preference for the canonical body structures would emerge as early as three years, increasing with age. Results only partially supported the hypothesis: while three-year-olds showed a significant preference for the canonical body structures as predicted, a significant preference reversal was found for the four-year-olds, with a tendency to return to preferring the canonical body at five years. The results are discussed in light of research findings associated with developmental theories hallmarking visual art perception in children.

The do re mi's of everyday life: the structure and personality correlates of music preferences.

PubMed

Rentfrow, Peter J; Gosling, Samuel D

2003-06-01

The present research examined individual differences in music preferences. A series of 6 studies investigated lay beliefs about music, the structure underlying music preferences, and the links between music preferences and personality. The data indicated that people consider music an important aspect of their lives and listening to music an activity they engaged in frequently. Using multiple samples, methods, and geographic regions, analyses of the music preferences of over 3,500 individuals converged to reveal 4 music-preference dimensions: Reflective and Complex, Intense and Rebellious, Upbeat and Conventional, and Energetic and Rhythmic. Preferences for these music dimensions were related to a wide array of personality dimensions (e.g., Openness), self-views (e.g., political orientation), and cognitive abilities (e.g., verbal IQ).

Photosensitized oxidation of unsaturated polymers

NASA Technical Reports Server (NTRS)

Golub, M. A.

1979-01-01

The photosensitized oxidation or singlet oxygenation of unsaturated hydrocarbon polymers and of their model compounds was reviewed. Emphasis was on cis and trans forms of 1,4-polyisoprene, 1,4-polybutadiene and 1,2-poly(1,4-hexadiene), and on 1,4-poly(2,3-dimethyl-1,3-butadiene). The microstructural changes which occur in these polymers on reaction with O2-1 in solution were investigated by infrared H-1 and C-13 NMR spectroscopy. The polymers were shown to yield allylic hydroperoxides with shifted double bonds according to the ene mechanism established for simple olefins. The photosensitized oxidation of the above unsaturated polymer exhibited zero order kinetics, the relative rates paralleling the reactivities of the corresponding simple olefins towards O2-1.

High-sensitivity chemical derivatization NMR analysis for condition monitoring of aged elastomers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Assink, Roger Alan; Celina, Mathias C.; Skutnik, Julie Michelle

2004-06-01

An aged polybutadiene-based elastomer was reacted with trifluoroacetic anhydride (TFAA) and subsequently analyzed via 19F NMR spectroscopy. Derivatization between the TFAA and hydroxyl functionalities produced during thermo-oxidative aging was achieved, resulting in the formation of trifluoroester groups on the polymer. Primary and secondary alcohols were confirmed to be the main oxidation products of this material, and the total percent oxidation correlated with data obtained from oxidation rate measurements. The chemical derivatization appears to be highly sensitive and can be used to establish the presence and identity of oxidation products in aged polymeric materials. This methodology represents a novel condition monitoringmore » approach for the detection of chemical changes that are otherwise difficult to analyze.« less

Infants Prefer the Musical Meter of Their Own Culture: A Cross-Cultural Comparison

ERIC Educational Resources Information Center

Soley, Gaye; Hannon, Erin E.

2010-01-01

Infants prefer native structures such as familiar faces and languages. Music is a universal human activity containing structures that vary cross-culturally. For example, Western music has temporally regular metric structures, whereas music of the Balkans (e.g., Bulgaria, Macedonia, Turkey) can have both regular and irregular structures. We…

Structure-wise discrimination of adenine and guanine by proteins on the basis of their nonbonded interactions.

PubMed

Usha, S; Selvaraj, S

2015-01-01

We have analyzed the nonbonded interactions of the structurally similar moieties, adenine and guanine forming complexes with proteins. The results comprise (a) the amino acid-ligand atom preferences, (b) solvent accessibility of ligand atoms before and after complex formation with proteins, and (c) preferred amino acid residue atoms involved in the interactions. We have observed that the amino acid preferences involved in the hydrogen bonding interactions vary for adenine and guanine. The structural variation between the purine atoms is clearly reflected by their burial tendency in the solvent environment. Correlation of the mean amino acid preference values show the variation that exists between adenine and guanine preferences of all the amino acid residues. All our observations provide evidence for the discriminating nature of the proteins in recognizing adenine and guanine.

Ceramic nanostructures and methods of fabrication

DOEpatents

Ripley, Edward B [Knoxville, TN; Seals, Roland D [Oak Ridge, TN; Morrell, Jonathan S [Knoxville, TN

2009-11-24

Structures and methods for the fabrication of ceramic nanostructures. Structures include metal particles, preferably comprising copper, disposed on a ceramic substrate. The structures are heated, preferably in the presence of microwaves, to a temperature that softens the metal particles and preferably forms a pool of molten ceramic under the softened metal particle. A nano-generator is created wherein ceramic material diffuses through the molten particle and forms ceramic nanostructures on a polar site of the metal particle. The nanostructures may comprise silica, alumina, titania, or compounds or mixtures thereof.

A PREFERENCE-OPPORTUNITY-CHOICE FRAMEWORK WITH APPLICATIONS TO INTERGROUP FRIENDSHIP*

PubMed Central

Zeng, Zhen; Xie, Yu

2009-01-01

A longstanding objective of friendship research is to identify the effects of personal preference and structural opportunity on intergroup friendship choice. Although past studies have used various methods to separate preference from opportunity, researchers have not yet systematically compared the properties and implications of these methods. We put forward a general framework for discrete choice, where choice probability is specified as proportional to the product of preference and opportunity. To implement this framework, we propose a modification to the conditional logit model for estimating preference parameters free from the influence of opportunity structure. We then compare our approach to several alternative methods for separating preference and opportunity used in the friendship choice literature. As an empirical example, we test hypotheses of homophily and status asymmetry in friendship choice using data from the National Longitudinal Study of Adolescent Health. The example also demonstrates the approach of conducting a sensitivity analysis to examine how parameter estimates vary by specification of the opportunity structure. PMID:19569394

Propensities of peptides containing the Asn-Gly segment to form β-turn and β-hairpin structures.

PubMed

Kang, Young Kee; Yoo, In Kee

2016-09-01

The propensities of peptides that contain the Asn-Gly segment to form β-turn and β-hairpin structures were explored using the density functional methods and the implicit solvation model in CH2 Cl2 and water. The populations of preferred β-turn structures varied depending on the sequence and solvent polarity. In solution, β-hairpin structures with βI' turn motifs were most preferred for the heptapeptides containing the Asn-Gly segment regardless of the sequence of the strands. These preferences in solution are consistent with the corresponding X-ray structures. The sequence, H-bond strengths, solvent polarity, and conformational flexibility appeared to interact to determine the preferred β-hairpin structure of each heptapeptide, although the β-turn segments played a role in promoting the formation of β-hairpin structures and the β-hairpin propensity varied. In the heptapeptides containing the Asn-Gly segment, the β-hairpin formation was enthalpically favored and entropically disfavored at 25°C in water. The calculated results for β-turns and β-hairpins containing the Asn-Gly segment imply that these structural preferences may be useful for the design of bioactive macrocyclic peptides containing β-hairpin mimics and the design of binding epitopes for protein-protein and protein-nucleic acid recognitions. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 653-664, 2016. © 2016 Wiley Periodicals, Inc.

Linking Gender-Related Toy Preferences to Social Structure: Changes in Children's Letters to Santa since 1978.

ERIC Educational Resources Information Center

Freeman, George; And Others

A study explored gender differences in toy preferences, using 824 children's responses to a southeastern newspaper's request for letters to Santa Claus. The results suggested that it is in the choice of toys associated with some aspect of the adult social structure where children's preferences show the greatest gender differences. Changes in toy…

An Assessment of Student Preferences for PowerPoint Presentation Structure in Undergraduate Courses

ERIC Educational Resources Information Center

Apperson, Jennifer M.; Laws, Eric L.; Scepansky, James A.

2008-01-01

Studies have demonstrated that students prefer PowerPoint and respond favorably to classes when it is used. Few studies have addressed the physical structure of PowerPoint. In this study, students enrolled in several psychology classes on two campuses completed a 36 item questionnaire regarding their preferences for the use of PowerPoint in the…

Morphological Evolution of Block Copolymer Particles: Effect of Solvent Evaporation Rate on Particle Shape and Morphology.

PubMed

Shin, Jae Man; Kim, YongJoo; Yun, Hongseok; Yi, Gi-Ra; Kim, Bumjoon J

2017-02-28

Shape and morphology of polymeric particles are of great importance in controlling their optical properties or self-assembly into unusual superstructures. Confinement of block copolymers (BCPs) in evaporative emulsions affords particles with diverse structures, including prolate ellipsoids, onion-like spheres, oblate ellipsoids, and others. Herein, we report that the evaporation rate of solvent from emulsions encapsulating symmetric polystyrene-b-polybutadiene (PS-b-PB) determines the shape and internal nanostructure of micron-sized BCP particles. A distinct morphological transition from the ellipsoids with striped lamellae to the onion-like spheres was observed with decreasing evaporation rate. Experiments and dissipative particle dynamics (DPD) simulations showed that the evaporation rate affected the organization of BCPs at the particle surface, which determined the final shape and internal nanostructure of the particles. Differences in the solvent diffusion rates in PS and PB at rapid evaporation rates induced alignment of both domains perpendicular to the particle surface, resulting in ellipsoids with axial lamellar stripes. Slower evaporation rates provided sufficient time for BCP organization into onion-like structures with PB as the outermost layer, owing to the preferential interaction of PB with the surroundings. BCP molecular weight was found to influence the critical evaporation rate corresponding to the morphological transition from ellipsoid to onion-like particles, as well as the ellipsoid aspect ratio. DPD simulations produced morphologies similar to those obtained from experiments and thus elucidated the mechanism and driving forces responsible for the evaporation-induced assembly of BCPs into particles with well-defined shapes and morphologies.

Preference effects on friendship choice: Evidence from an online field experiment.

PubMed

Yu, Siyu; Xie, Yu

2017-08-01

Observed friendship choices are constrained by social structures and thus problematic indicators for underlying personal preferences. In this paper, we report on a study demonstrating the causal effects of preference in friendship choice based on an online field experiment. Specifically, we tested two important forces that govern friendship choices: preference for shared group identity (operationalized as the desire to befriend others sharing the same place-of-origin identity) and preference for high status (operationalized as the desire to befriend others from high-status institutions). Using an online field experiment in one of the largest social network service websites in China, we investigated the causal preference effects of these two forces free from structural constraints. The results of our study confirm the preference effects on friendship choice in both of the two dimensions we tested. Copyright © 2017. Published by Elsevier Inc.

Physical cognition: birds learn the structural efficacy of nest material

PubMed Central

Bailey, Ida E.; Morgan, Kate V.; Bertin, Marion; Meddle, Simone L.; Healy, Susan D.

2014-01-01

It is generally assumed that birds’ choice of structurally suitable materials for nest building is genetically predetermined. Here, we tested that assumption by investigating whether experience affected male zebra finches’ (Taeniopygia guttata) choice of nest material. After a short period of building with relatively flexible string, birds preferred to build with stiffer string while those that had experienced a stiffer string were indifferent to string type. After building a complete nest with either string type, however, all birds increased their preference for stiff string. The stiffer string appeared to be the more effective building material as birds required fewer pieces of stiffer than flexible string to build a roofed nest. For birds that raised chicks successfully, there was no association between the material they used to build their nest and the type they subsequently preferred. Birds’ material preference reflected neither the preference of their father nor of their siblings but juvenile experience of either string type increased their preference for stiffer string. Our results represent two important advances: (i) birds choose nest material based on the structural properties of the material; (ii) nest material preference is not entirely genetically predetermined as both the type and amount of experience influences birds’ choices. PMID:24741011

Physical cognition: birds learn the structural efficacy of nest material.

PubMed

Bailey, Ida E; Morgan, Kate V; Bertin, Marion; Meddle, Simone L; Healy, Susan D

2014-06-07

It is generally assumed that birds' choice of structurally suitable materials for nest building is genetically predetermined. Here, we tested that assumption by investigating whether experience affected male zebra finches' (Taeniopygia guttata) choice of nest material. After a short period of building with relatively flexible string, birds preferred to build with stiffer string while those that had experienced a stiffer string were indifferent to string type. After building a complete nest with either string type, however, all birds increased their preference for stiff string. The stiffer string appeared to be the more effective building material as birds required fewer pieces of stiffer than flexible string to build a roofed nest. For birds that raised chicks successfully, there was no association between the material they used to build their nest and the type they subsequently preferred. Birds' material preference reflected neither the preference of their father nor of their siblings but juvenile experience of either string type increased their preference for stiffer string. Our results represent two important advances: (i) birds choose nest material based on the structural properties of the material; (ii) nest material preference is not entirely genetically predetermined as both the type and amount of experience influences birds' choices.

Behavioral variability of choices versus structural inconsistency of preferences.

PubMed

Regenwetter, Michel; Davis-Stober, Clintin P

2012-04-01

Theories of rational choice often make the structural consistency assumption that every decision maker's binary strict preference among choice alternatives forms a strict weak order. Likewise, the very concept of a utility function over lotteries in normative, prescriptive, and descriptive theory is mathematically equivalent to strict weak order preferences over those lotteries, while intransitive heuristic models violate such weak orders. Using new quantitative interdisciplinary methodologies, we dissociate the variability of choices from the structural inconsistency of preferences. We show that laboratory choice behavior among stimuli of a classical "intransitivity" paradigm is, in fact, consistent with variable strict weak order preferences. We find that decision makers act in accordance with a restrictive mathematical model that, for the behavioral sciences, is extraordinarily parsimonious. Our findings suggest that the best place to invest future behavioral decision research is not in the development of new intransitive decision models but rather in the specification of parsimonious models consistent with strict weak order(s), as well as heuristics and other process models that explain why preferences appear to be weakly ordered.

Local Structural Differences in Homologous Proteins: Specificities in Different SCOP Classes

PubMed Central

Joseph, Agnel Praveen; Valadié, Hélène; Srinivasan, Narayanaswamy; de Brevern, Alexandre G.

2012-01-01

The constant increase in the number of solved protein structures is of great help in understanding the basic principles behind protein folding and evolution. 3-D structural knowledge is valuable in designing and developing methods for comparison, modelling and prediction of protein structures. These approaches for structure analysis can be directly implicated in studying protein function and for drug design. The backbone of a protein structure favours certain local conformations which include α-helices, β-strands and turns. Libraries of limited number of local conformations (Structural Alphabets) were developed in the past to obtain a useful categorization of backbone conformation. Protein Block (PB) is one such Structural Alphabet that gave a reasonable structure approximation of 0.42 Å. In this study, we use PB description of local structures to analyse conformations that are preferred sites for structural variations and insertions, among group of related folds. This knowledge can be utilized in improving tools for structure comparison that work by analysing local structure similarities. Conformational differences between homologous proteins are known to occur often in the regions comprising turns and loops. Interestingly, these differences are found to have specific preferences depending upon the structural classes of proteins. Such class-specific preferences are mainly seen in the all-β class with changes involving short helical conformations and hairpin turns. A test carried out on a benchmark dataset also indicates that the use of knowledge on the class specific variations can improve the performance of a PB based structure comparison approach. The preference for the indel sites also seem to be confined to a few backbone conformations involving β-turns and helix C-caps. These are mainly associated with short loops joining the regular secondary structures that mediate a reversal in the chain direction. Rare β-turns of type I’ and II’ are also identified as preferred sites for insertions. PMID:22745680

Photon and a preferred frame scenario

NASA Astrophysics Data System (ADS)

Rembieliński, Jakub; Ciborowski, Jacek

2018-06-01

Structure of the space of photonic states is discussed in the context of a working hypothesis of existence of a preferred frame for photons. Two polarization experiments are proposed to test the preferred frame scenario.

Heat sterilizable solid-propellant development

NASA Technical Reports Server (NTRS)

Kalfayan, S. H.

1981-01-01

The binders tested were polyurethanes made from two hydroxy-terminated polybutadienes, R-45 and Butarez HT, one hydroxy-terminated butadiene-acrylonitrile copolymer, Hycar 1300X 17, and a hydroxy-terminated prepolymer, Esterdiol 560, made from the dimerized fatty acid Empol 1010. The isocyanates used most extensively were isophorone diisocyanate (IPDI) and a polymeric diisocyanate, DDI. Stress relaxation was used to examine the chemical changes that took place in the binder when subjected to the sterilization temperatures. The thermal stability of the oxidizer, ammonium perchlorate (AP), was tested by thermogravimetry in the isothermal and nonisothermal modes. The effect of particle size, recrystallization, moisture content, and doping on the heat stability of AP could be evaluated by this method. The volatile degradation products, obtained when AP samples were aged at 135 C for prolonged periods, were analyzed by mass spectroscopy.

Design of a Hybrid Propulsion System for Orbit Raising Applications

NASA Astrophysics Data System (ADS)

Boman, N.; Ford, M.

2004-10-01

A trade off between conventional liquid apogee engines used for orbit raising applications and hybrid rocket engines (HRE) has been performed using a case study approach. Current requirements for lower cost and enhanced safety places hybrid propulsion systems in the spotlight. For evaluating and design of a hybrid rocket engine a parametric engineering code is developed, based on the combustion chamber characteristics of selected propellants. A single port cylindrical section of fuel grain is considered. Polyethylene (PE) and hydroxyl-terminated polybutadiene (HTPB) represents the fuels investigated. The engine design is optimized to minimize the propulsion system volume and mass, while keeping the system as simple as possible. It is found that the fuel grain L/D ratio boundary condition has a major impact on the overall hybrid rocket engine design.

Space shuttle nonmetallic materials age life prediction

NASA Technical Reports Server (NTRS)

Mendenhall, G. D.; Hassell, J. A.; Nathan, R. A.

1975-01-01

The chemiluminescence from samples of polybutadiene, Viton, Teflon, Silicone, PL 731 Adhesive, and SP 296 Boron-Epoxy composite was measured at temperatures from 25 to 150 C. Excellent correlations were obtained between chemiluminescence and temperature. These correlations serve to validate accelerated aging tests (at elevated temperatures) designed to predict service life at lower temperatures. In most cases, smooth or linear correlations were obtained between chemiluminescence and physical properties of purified polymer gums, including the tensile strength, viscosity, and loss tangent. The latter is a complex function of certain polymer properties. Data were obtained with far greater ease by the chemiluminescence technique than by the conventional methods of study. The chemiluminescence from the Teflon (Halon) samples was discovered to arise from trace amounts of impurities, which were undetectable by conventional, destructive analysis of the sample.

RSRM-13 (360Q013) ballistics mass properties flight designation STS-41

NASA Technical Reports Server (NTRS)

Laubacher, Brian A.; Richards, M. C.

1990-01-01

The propulsion performance and reconstructed mass properties data from Thiokol's RSRM-13 motors which were assigned to the STS-41 launch are presented. The SRM propellant, TP-H1148, is a composite type solid propellant, formulated of polybutadiene acrylic acid acryonitrile terpolymer binder, epoxy curing agent, ammonium perchlorate oxidizer, and aluminum powder fuel. A small amount of burning rate catalyst (iron oxide) was added to achieve the desired propellant burn rate. The propellant evaluation and raw material information are also presented. The presented ballistic performance was based on the Operational Flight Instrumentation. The adjustments made to the raw data on this flight include biasing the data to correct ambient pressure before liftoff. The performance from each motor as well as matched pair performance values were well within the CEI Specification requirements.

Manganese containing layer for magnetic recording media

DOEpatents

Lambeth, David N.; Lee, Li-Lien; Laughlin, David E.

1999-01-01

The present invention provides for a magnetic recording media incorporating Mn-containing layers between a substrate and a magnetic layer to provide media having increased coercivity and lower noise. The Mn-containing layer can be incorporated in a rotating, translating or stationary recording media to operate in conjunction with magnetic transducing heads for recording and reading of magnetic data, as well as other applications. The magnetic recording medium of the invention preferably includes a Co or Co alloy film magnetic layer, and Mn-containing layer, preferably comprised of VMn, TiMn, MnZn, CrMnMo, CrMnW, CrMnV, and CrMnTi, and most preferably a CrMn alloy, disposed between the substrate and the magnetic layer to promote an epitaxial crystalline structure in the magnetic layer. The medium can further include seed layers, preferably polycrystalline MgO for longitudinal media, underlayers, and intermediate layers. Underlayers and intermediate layers are comprised of materials having either an A2 structure or a B2-ordered crystalline structure disposed between the seed layer and the magnetic layer. Materials having an A2 structure are preferably Cr or Cr alloys, such as CrV, CrMo, CrW and CrTi. Materials having a B2-ordered structure having a lattice constant that is substantially comparable to that of Cr, such as those preferably selected from the group consisting of NiAl, AILCo, FeAl, FeTi, CoFe, CoTi, CoHf, CoZr, NiTi, CuBe, CuZn, A-LMn, AlRe, AgMg, and Al.sub.2 FeMn.sub.2, and is most preferably FeAl or NiAl.

Factor structure of the autonomy preference index in people with severe mental illness.

PubMed

Bonfils, Kelsey A; Adams, Erin L; Mueser, Kim T; Wright-Berryman, Jennifer L; Salyers, Michelle P

2015-08-30

People vary in the amount of control they want to exercise over decisions about their healthcare. Given the importance of patient-centered care, accurate measurement of these autonomy preferences is critical. This study aimed to assess the factor structure of the Autonomy Preference Index (API), used widely in general healthcare, in individuals with severe mental illness. Data came from two studies of people with severe mental illness (N=293) who were receiving mental health and/or primary care/integrated care services. Autonomy preferences were assessed with the API regarding both psychiatric and primary care services. Confirmatory factor analysis was used to evaluate fit of the hypothesized two-factor structure of the API (decision-making autonomy and information-seeking autonomy). Results indicated the hypothesized structure for the API did not adequately fit the data for either psychiatric or primary care services. Three problematic items were dropped, resulting in adequate fit for both types of treatment. These results suggest that with relatively minor modifications the API has an acceptable factor structure when asking people with severe mental illness about their preferences to be involved in decision-making. The modified API has clinical and research utility for this population in the burgeoning field of autonomy in patient-centered healthcare. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Wzx flippases exhibiting complex O-unit preferences require a new model for Wzx-substrate interactions.

PubMed

Liu, Michael A; Morris, Paraskevi; Reeves, Peter R

2018-06-10

The Wzx flippase is a critical component of the O-antigen biosynthesis pathway, being responsible for the translocation of oligosaccharide O units across the inner membrane in Gram-negative bacteria. Recent studies have shown that Wzx has a strong preference for its cognate O unit, but the types of O-unit structural variance that a given Wzx can accommodate are poorly understood. In this study, we identified two Yersinia pseudotuberculosis Wzx that can distinguish between different terminal dideoxyhexose sugars on a common O-unit main-chain, despite both being able to translocate several other structurally-divergent O units. We also identified other Y. pseudotuberculosis Wzx that can translocate a structurally divergent foreign O unit with high efficiency, and thus exhibit an apparently relaxed substrate preference. It now appears that Wzx substrate preference is more complex than previously suggested, and that not all O-unit residues are equally important determinants of translocation efficiency. We propose a new "Structure-Specific Triggering" model in which Wzx translocation proceeds at a low level for a wide variety of substrates, with high-frequency translocation only being triggered by Wzx interacting with one or more preferred O-unit structural elements found on its cognate O unit(s). © 2018 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

The Factor Structure of the Vocational Preference Inventory for Black and White College Students

ERIC Educational Resources Information Center

Yom, B. Lee; And Others

1975-01-01

In the present study, the Vocational Preference Inventory scores for a group of black students and white students were factor analyzed and the black structure was rotated to correspond to the white structure. The correspondence between the variables for black and white students was found to be very similar. (Author)

Polymer Hydrogel/Polybutadiene/Iron Oxide Nanoparticle Hybrid Actuators for the Characterization of NiTi Implants

PubMed Central

Jeličić, Aleksandra; Friedrich, Alwin; Jeremić, Katarina; Siekmeyer, Gerd; Taubert, Andreas

2009-01-01

One of the main issues with the use of nickel titanium alloy (NiTi) implants in cardiovascular implants (stents) is that these devices must be of very high quality in order to avoid subsequent operations due to failing stents. For small stents with diameters below ca. 2 mm, however, stent characterization is not straightforward. One of the main problems is that there are virtually no methods to characterize the interior of the NiTi tubes used for fabrication of these tiny stents. The current paper reports on a robust hybrid actuator for the characterization of NiTi tubes prior to stent fabrication. The method is based on a polymer/hydrogel/magnetic nanoparticle hybrid material and allows for the determination of the inner diameter at virtually all places in the raw NiTi tubes. Knowledge of the inner structure of the raw NiTi tubes is crucial to avoid regions that are not hollow or regions that are likely to fail due to defects inside the raw tube. The actuator enables close contact of a magnetic polymer film with the inner NiTi tube surface. The magnetic signal can be detected from outside and be used for a direct mapping of the tube interior. As a result, it is possible to detect critical regions prior to expensive and slow stent fabrication processes.

Non-homogeneous hybrid rocket fuel for enhanced regression rates utilizing partial entrainment

NASA Astrophysics Data System (ADS)

Boronowsky, Kenny

A concept was developed and tested to enhance the performance and regression rate of hydroxyl terminated polybutadiene (HTPB), a commonly used hybrid rocket fuel. By adding small nodules of paraffin into the HTPB fuel, a non-homogeneous mixture was created resulting in increased regression rates. The goal was to develop a fuel with a simplified single core geometry and a tailorable regression rate. The new fuel would benefit from the structural stability of HTPB yet not suffer from the large void fraction representative of typical HTPB core geometries. Regression rates were compared between traditional HTPB single core grains, 85% HTPB mixed with 15% (by weight) paraffin cores, 70% HTPB mixed with 30% paraffin cores, and plain paraffin single core grains. Each fuel combination was tested at oxidizer flow rates, ranging from 0.9 - 3.3 g/s of gaseous oxygen, in a small scale hybrid test rocket and average regression rates were measured. While large uncertainties were present in the experimental setup, the overall data showed that the regression rate was enhanced as paraffin concentration increased. While further testing would be required at larger scales of interest, the trends are encouraging. Inclusion of paraffin nodules in the HTPB grain may produce a greater advantage than other more noxious additives in current use. In addition, it may lead to safer rocket motors with higher integrated thrust due to the decreased void fraction.

Deciphering the shape and deformation of secondary structures through local conformation analysis

PubMed Central

2011-01-01

Background Protein deformation has been extensively analysed through global methods based on RMSD, torsion angles and Principal Components Analysis calculations. Here we use a local approach, able to distinguish among the different backbone conformations within loops, α-helices and β-strands, to address the question of secondary structures' shape variation within proteins and deformation at interface upon complexation. Results Using a structural alphabet, we translated the 3 D structures of large sets of protein-protein complexes into sequences of structural letters. The shape of the secondary structures can be assessed by the structural letters that modeled them in the structural sequences. The distribution analysis of the structural letters in the three protein compartments (surface, core and interface) reveals that secondary structures tend to adopt preferential conformations that differ among the compartments. The local description of secondary structures highlights that curved conformations are preferred on the surface while straight ones are preferred in the core. Interfaces display a mixture of local conformations either preferred in core or surface. The analysis of the structural letters transition occurring between protein-bound and unbound conformations shows that the deformation of secondary structure is tightly linked to the compartment preference of the local conformations. Conclusion The conformation of secondary structures can be further analysed and detailed thanks to a structural alphabet which allows a better description of protein surface, core and interface in terms of secondary structures' shape and deformation. Induced-fit modification tendencies described here should be valuable information to identify and characterize regions under strong structural constraints for functional reasons. PMID:21284872

Deciphering the shape and deformation of secondary structures through local conformation analysis.

PubMed

Baussand, Julie; Camproux, Anne-Claude

2011-02-01

Protein deformation has been extensively analysed through global methods based on RMSD, torsion angles and Principal Components Analysis calculations. Here we use a local approach, able to distinguish among the different backbone conformations within loops, α-helices and β-strands, to address the question of secondary structures' shape variation within proteins and deformation at interface upon complexation. Using a structural alphabet, we translated the 3 D structures of large sets of protein-protein complexes into sequences of structural letters. The shape of the secondary structures can be assessed by the structural letters that modeled them in the structural sequences. The distribution analysis of the structural letters in the three protein compartments (surface, core and interface) reveals that secondary structures tend to adopt preferential conformations that differ among the compartments. The local description of secondary structures highlights that curved conformations are preferred on the surface while straight ones are preferred in the core. Interfaces display a mixture of local conformations either preferred in core or surface. The analysis of the structural letters transition occurring between protein-bound and unbound conformations shows that the deformation of secondary structure is tightly linked to the compartment preference of the local conformations. The conformation of secondary structures can be further analysed and detailed thanks to a structural alphabet which allows a better description of protein surface, core and interface in terms of secondary structures' shape and deformation. Induced-fit modification tendencies described here should be valuable information to identify and characterize regions under strong structural constraints for functional reasons.

Young Children's Color Preferences in the Interior Environment

ERIC Educational Resources Information Center

Read, Marilyn A.; Upington, Deborah

2009-01-01

This study focuses on children's color preferences in the interior environment. Previous studies highlight young children's preferences for the colors red and blue. The methods of this study used a rank ordering technique and a semi-structured interview process with 3-, 4-, and 5-year-old children. Findings reveal that children prefer the color…

Site preference of alloying elements in DO22-Ni3V phase: Phase-field and first-principles study

NASA Astrophysics Data System (ADS)

Zhang, Ding-Ni; Shangguan, Qian-Qian; Liu, Fu; Zhang, Ming-Yi

2015-07-01

Site preference of alloying elements in DO22-Ni3V phase was investigated using phase-field and first-principles method. The concentrations of alloying elements on sublattices of DO22-Ni3V phase were quantitatively studied using phase-field model based on microscopic diffusion equations. The phase-field computation results demonstrate that the concentration differences of alloying elements on the NiI and NiII site are attributed to the coordination environment difference. Host atoms Ni and substitutional ternary additions Al prefer to occupy NiI site. Antisite atoms V show site preference on the NiII site. Further reason of site preference of alloying elements on the two different Ni sites were studied using first-principles method to calculate the electronic structure of DO22-Ni3V phase. Calculation of density of states, orbitals population and charge population of the optimized Ni3V structure found that the electronic structures of NiI and NiII sites are different. Electronic structure difference, which is caused by coordination environment difference, is the essential reason for site selectivity behaviors of alloying elements on NiI and NiII sites.

How Are Preferences Revealed?

PubMed Central

Beshears, John; Choi, James J.; Laibson, David; Madrian, Brigitte C.

2009-01-01

Revealed preferences are tastes that rationalize an economic agent’s observed actions. Normative preferences represent the agent’s actual interests. It sometimes makes sense to assume that revealed preferences are identical to normative preferences. But there are many cases where this assumption is violated. We identify five factors that increase the likelihood of a disparity between revealed preferences and normative preferences: passive choice, complexity, limited personal experience, third-party marketing, and intertemporal choice. We then discuss six approaches that jointly contribute to the identification of normative preferences: structural estimation, active decisions, asymptotic choice, aggregated revealed preferences, reported preferences, and informed preferences. Each of these approaches uses consumer behavior to infer some property of normative preferences without equating revealed and normative preferences. We illustrate these issues with evidence from savings and investment outcomes. PMID:24761048

Felder-Soloman's Index of Learning Styles: internal consistency, temporal stability, and factor structure.

PubMed

Hosford, Charles C; Siders, William A

2010-10-01

Strategies to facilitate learning include using knowledge of students' learning style preferences to inform students and their teachers. Aims of this study were to evaluate the factor structure, internal consistency, and temporal stability of medical student responses to the Index of Learning Styles (ILS) and determine its appropriateness as an instrument for medical education. The ILS assesses preferences on four dimensions: sensing/intuitive information perceiving, visual/verbal information receiving, active/reflective information processing, and sequential/global information understanding. Students entering the 2002-2007 classes completed the ILS; some completed the ILS again after 2 and 4 years. Analyses of responses supported the ILS's intended structure and moderate reliability. Students had moderate preferences for sensing and visual learning. This study provides evidence supporting the appropriateness of the ILS for assessing learning style preferences in medical students.

The Structure of Musical Preferences: A Five-Factor Model

PubMed Central

Rentfrow, Peter J.; Goldberg, Lewis R.; Levitin, Daniel J.

2011-01-01

Music is a cross-cultural universal, a ubiquitous activity found in every known human culture. Individuals demonstrate manifestly different preferences in music, and yet relatively little is known about the underlying structure of those preferences. Here, we introduce a model of musical preferences based on listeners’ affective reactions to excerpts of music from a wide variety of musical genres. The findings from three independent studies converged to suggest that there exists a latent five-factor structure underlying music preferences that is genre-free, and reflects primarily emotional/affective responses to music. We have interpreted and labeled these factors as: 1) a Mellow factor comprising smooth and relaxing styles; 2) an Urban factor defined largely by rhythmic and percussive music, such as is found in rap, funk, and acid jazz; 3) a Sophisticated factor that includes classical, operatic, world, and jazz; 4) an Intense factor defined by loud, forceful, and energetic music; and 5) a Campestral factor comprising a variety of different styles of direct, and rootsy music such as is often found in country and singer-songwriter genres. The findings from a fourth study suggest that preferences for the MUSIC factors are affected by both the social and auditory characteristics of the music. PMID:21299309

The psychometric properties of the generalized anxiety disorder-7 scale in Hispanic Americans with English or Spanish language preference.

PubMed

Mills, Sarah D; Fox, Rina S; Malcarne, Vanessa L; Roesch, Scott C; Champagne, Brian R; Sadler, Georgia Robins

2014-07-01

The Generalized Anxiety Disorder-7 scale (GAD-7) is a self-report questionnaire that is widely used to screen for anxiety. The GAD-7 has been translated into numerous languages, including Spanish. Previous studies evaluating the structural validity of the English and Spanish versions indicate a unidimensional factor structure in both languages. However, the psychometric properties of the Spanish language version have yet to be evaluated in samples outside of Spain, and the measure has not been tested for use among Hispanic Americans. This study evaluated the reliability, structural validity, and convergent validity of the English and Spanish language versions of the GAD-7 for Hispanic Americans in the United States. A community sample of 436 Hispanic Americans with an English (n = 210) or Spanish (n = 226) language preference completed the GAD-7. Multiple-group confirmatory factor analysis (CFA) was used to examine the goodness-of-fit of the unidimensional factor structure of the GAD-7 across language-preference groups. Results from the multiple-group CFA indicated a similar unidimensional factor structure with equivalent response patterns and item intercepts, but different variances, across language-preference groups. Internal consistency was good for both English and Spanish language-preference groups. The GAD-7 also evidenced good convergent validity as demonstrated by significant correlations in expected directions with the Perceived Stress Scale, the Patient Health Questionnaire-9, and the Physical Health domain of the World Health Organization Quality of Life-BREF assessment. The unidimensional GAD-7 is suitable for use among Hispanic Americans with an English or Spanish language preference.

Implicit structured sequence learning: an fMRI study of the structural mere-exposure effect

PubMed Central

Folia, Vasiliki; Petersson, Karl Magnus

2014-01-01

In this event-related fMRI study we investigated the effect of 5 days of implicit acquisition on preference classification by means of an artificial grammar learning (AGL) paradigm based on the structural mere-exposure effect and preference classification using a simple right-linear unification grammar. This allowed us to investigate implicit AGL in a proper learning design by including baseline measurements prior to grammar exposure. After 5 days of implicit acquisition, the fMRI results showed activations in a network of brain regions including the inferior frontal (centered on BA 44/45) and the medial prefrontal regions (centered on BA 8/32). Importantly, and central to this study, the inclusion of a naive preference fMRI baseline measurement allowed us to conclude that these fMRI findings were the intrinsic outcomes of the learning process itself and not a reflection of a preexisting functionality recruited during classification, independent of acquisition. Support for the implicit nature of the knowledge utilized during preference classification on day 5 come from the fact that the basal ganglia, associated with implicit procedural learning, were activated during classification, while the medial temporal lobe system, associated with explicit declarative memory, was consistently deactivated. Thus, preference classification in combination with structural mere-exposure can be used to investigate structural sequence processing (syntax) in unsupervised AGL paradigms with proper learning designs. PMID:24550865

Implicit structured sequence learning: an fMRI study of the structural mere-exposure effect.

PubMed

Folia, Vasiliki; Petersson, Karl Magnus

2014-01-01

In this event-related fMRI study we investigated the effect of 5 days of implicit acquisition on preference classification by means of an artificial grammar learning (AGL) paradigm based on the structural mere-exposure effect and preference classification using a simple right-linear unification grammar. This allowed us to investigate implicit AGL in a proper learning design by including baseline measurements prior to grammar exposure. After 5 days of implicit acquisition, the fMRI results showed activations in a network of brain regions including the inferior frontal (centered on BA 44/45) and the medial prefrontal regions (centered on BA 8/32). Importantly, and central to this study, the inclusion of a naive preference fMRI baseline measurement allowed us to conclude that these fMRI findings were the intrinsic outcomes of the learning process itself and not a reflection of a preexisting functionality recruited during classification, independent of acquisition. Support for the implicit nature of the knowledge utilized during preference classification on day 5 come from the fact that the basal ganglia, associated with implicit procedural learning, were activated during classification, while the medial temporal lobe system, associated with explicit declarative memory, was consistently deactivated. Thus, preference classification in combination with structural mere-exposure can be used to investigate structural sequence processing (syntax) in unsupervised AGL paradigms with proper learning designs.

EXAMINING THE PREFERENCE FOR SHADE STRUCTURES IN FARMED GREEN SEA TURTLES (CHELONIA MYDAS) AND SHADE'S EFFECT ON GROWTH AND TEMPERATURES.

PubMed

Keller, Martha; Mustin, Walter

2017-03-01

The Cayman Turtle Farm raises thousands of green sea turtles ( Chelonia mydas ) annually under aquaculture conditions. Historically, the turtles have been raised in tanks without routine access to a shade structure. The purpose of this study was to determine the effects of adding a shade structure on curved carapace length (CCL) and weight gain of green sea turtles. In addition, water and cloacal temperatures were compared across treatment groups and shade cover preferences observed. Ninety turtles were split equally into three treatment groups for this 8-wk study. In the first group turtles were kept in tanks in full sun, the second group in half-shaded tanks, and the third group in tanks completely covered with shade cloth. Time-lapse cameras mounted above half-shaded tanks were used to determine turtle shade structure preferences throughout the day. There were no differences in CCL among treatment groups. Significant increases in weights were noted in turtles kept in full sun and half-shaded tanks versus the fully shaded tanks. Significantly higher water and cloacal turtle temperatures were noted in the full-sun tank compared with the half-shaded or completely shaded tanks. A significantly lower number of turtles was observed in the sun in the half-shaded tanks, indicating a possible preference by turtles for a shade structure. Results suggest that providing shade structures for sea turtles results in a significant decrease in both overall water temperature as well as a reduction in maximum high daily temperatures. Results also suggest that turtles exhibit a preference for shade structures when it is provided as an option. From these results, we recommend that a shade structure be provided when housing green sea turtles in outdoor enclosures.

Endoscopy Practice Management, Fee Structures, and Marketing.

PubMed

Divers, Stephen J

2015-09-01

Although our knowledge and appreciation of endoscopic procedures in exotic pets is extensive, associated management practices, including equipment preferences and fee structures, have rarely been discussed. This short article highlights the results of a small survey of 35 experienced exotic animal endoscopists and details their equipment ownership/preferences and fee structures. The importance of marketing is also emphasized. Copyright © 2015 Elsevier Inc. All rights reserved.

Behavioral Variability of Choices versus Structural Inconsistency of Preferences

ERIC Educational Resources Information Center

Regenwetter, Michel; Davis-Stober, Clintin P.

2012-01-01

Theories of rational choice often make the structural consistency assumption that every decision maker's binary strict preference among choice alternatives forms a "strict weak order". Likewise, the very concept of a "utility function" over lotteries in normative, prescriptive, and descriptive theory is mathematically equivalent to strict weak…

Learning Style Preferences of Elderly Coronary Artery Disease Patients.

ERIC Educational Resources Information Center

Theis, Saundra L.; Merritt, Sharon L.

1992-01-01

The Patient Learning Styles Questionnaire derived from Canfield and administered to 134 elderly coronary artery disease patients revealed the following order of learning preferences: structure, iconics, listening, direct experience, reading, achievement, affiliation, and eminence. Level of education significantly influenced preferred learning…

The Aquila launch service for small satellites

NASA Astrophysics Data System (ADS)

Whittinghill, George R.; McKinney, Bevin C.

1992-07-01

The Aquila launch vehicle is described emphasizing its use in the deployment of small satellites for the commercial sector. The Aquila is designed to use a guidance, navigation, and control system, and the rocket is based on hybrid propulsion incorporating a liquid oxidizer with a solid polybutadiene fuel. The launch vehicle for the system is a ground-launched four-stage vehicle that can deliver 3,200 lbs of payload into a 185-km circular orbit at 90-deg inclination. Aquila avionics include inertial navigation, radar transponder, and an S-band telemetry transmitter. The payload environment minimizes in-flight acoustic levels, and the launch-ascent profile is characterized by low acceleration. The launch vehicle uses low-cost rocket motors, a high-performance LO(x) feed system, and erector launch capability which contribute to efficient launches for commercial payloads for low polar earth orbits.

Kinetic calculations of explosives with slow-burning constituents

NASA Astrophysics Data System (ADS)

Howard, W. Michael; Souers, P. Clark; Fried, Laurence E.

1998-07-01

The equilibrium thermochemical code CHEETAH V1.40 has been modified to detonate part of the explosive and binder. An Einstein thermal description of the unreacted constituents is used, and the Einstein temperature may be increased to reduce heat absorption. We study the effect of the reactivity and thermal transport on the detonation velocity. Hydroxy-terminated-polybutadiene binders have low energy and density and would degrade the detonation velocity if they burned. Runs with unburned binder are closer to the measured values. Aluminum and ammonium perchlorate are also largely unburned within the sonic reaction zone that determines the detonation velocity. All three materials appear not to fully absorb heat as well. The normal assumption of total reaction in a thermochemical code is clearly not true for these special cases, where the detonation velocities have widely different values for different combinations of processes.

Development of procedures for calculating stiffness and damping properties of elastomers in engineering applications. Part 2: Elastomer characteristics at constant temperature

NASA Technical Reports Server (NTRS)

Gupta, P. K.; Tessarzik, J. M.; Cziglenyi, L.

1974-01-01

Dynamic properties of a commerical polybutadiene compound were determined at a constant temperature of 32 C by a forced-vibration resonant mass type of apparatus. The constant thermal state of the elastomer was ensured by keeping the ambient temperature constant and by limiting the power dissipation in the specimen. Experiments were performed with both compression and shear specimens at several preloads (nominal strain varying from 0 to 5 percent), and the results are reported in terms of a complex stiffness as a function of frequency. Very weak frequency dependence is observed and a simple power law type of correlation is shown to represent the data well. Variations in the complex stiffness as a function of preload are also found to be small for both compression and shear specimens.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, R.E.

This report describes the analysis of carbonxyl-terminated butadiene (CTB), carboxyl-terminated butadiene/acrylonitrile (CTBN), and a CTBN adduct prepared by reaction with Epon 828. Data from gel permeation chromatography, nuclear magnetic resonance spectroscopy, high performance liquid chromatography, and ion chromatography are presented and discussed. Quantitative methods based on carbon-13 and proton NMR for analyzing CTBN are described. Proton NMR was found to be useful in identifying lots that have an abnormal amount of CTBN protons. One such lot exhibited a phase separation of a polybutadiene impurity. Carbon-13 NMR was found to be capable of determining nitrile content directly. Carbon-13 NMR had amore » relative standard deviation of 8.3% and a proton NMR of 3.9%. Proton NMR was found to be useful in identifying lots that have 5% more CTBN protons than other lots. 3 refs., 11 figs., 4 tabs.« less

Developments in new aircraft tire tread materials. [fatigue life of elastomeric materials

NASA Technical Reports Server (NTRS)

Yager, T. J.; Mccarty, J. L.; Riccitiello, S. R.; Golub, M. A.

1976-01-01

Comparative laboratory and field tests were conducted on experimental and state-of-the-art aircraft tire tread materials in a program aimed at seeking new elastomeric materials which would provide improved aircraft tire tread wear, traction, and blowout resistance in the interests of operational safety and economy. The experimental stock was formulated of natural rubber and amorphous vinyl polybutadiene to provide high thermal-oxidative resistance, a characteristic pursued on the premise that thermal oxidation is involved both in the normal abrasion or wear of tire treads and probably in the chain of events leading to blowout failures. Results from the tests demonstrate that the experimental stock provided better heat buildup (hysteresis) and fatigue properties, at least equal wet and dry traction, and greater wear resistance than the state-of-the-art stock.

The dynamics of radical right-wing populist party preferences and perceived group threat: A comparative panel analysis of three competing hypotheses in the Netherlands and Germany.

PubMed

Berning, Carl C; Schlueter, Elmar

2016-01-01

Existing cross-sectional research considers citizens' preferences for radical right-wing populist (RRP) parties to be centrally driven by their perception that immigrants threaten the well-being of the national ingroup. However, longitudinal evidence for this relationship is largely missing. To remedy this gap in the literature, we developed three competing hypotheses to investigate: (a) whether perceived group threat is temporally prior to RRP party preferences, (b) whether RRP party preferences are temporally prior to perceived group threat, or (c) whether the relation between perceived group threat and RRP party preferences is bidirectional. Based on multiwave panel data from the Netherlands for the years 2008-2013 and from Germany spanning the period 1994-2002, we examined the merits of these hypotheses using autoregressive cross-lagged structural equation models. The results show that perceptions of threatened group interests precipitate rather than follow citizens' preferences for RRP parties. These findings help to clarify our knowledge of the dynamic structure underlying RRP party preferences. Copyright © 2015 Elsevier Inc. All rights reserved.

Enclosure for thermoelectric refrigerator and method

NASA Technical Reports Server (NTRS)

Park, Brian V. (Inventor); McGrath, Ralph D. (Inventor)

1997-01-01

An enclosed structure is provided for use with a refrigerator having a door assembly. The enclosed structure preferably contains superinsulation materials and a plurality of matching drawers. The enclosed structure preferably includes corner joints which minimize thermal energy transfer between adjacent superinsulation panels. The refrigerator may include a cooling system having a thermoelectric device for maintaining the temperature within the refrigerator at selected values. If desired, a fluid cooling system and an active gasket may also be provided between the door assembly and the enclosed structure. The fluid cooling system preferably includes a second thermoelectric device to maintain the temperature of fluid flowing through the active gasket at a selected value. The drawers associated with the refrigerator may be used for gathering, processing, shipping and storing food or other perishable items.

RCK: accurate and efficient inference of sequence- and structure-based protein-RNA binding models from RNAcompete data.

PubMed

Orenstein, Yaron; Wang, Yuhao; Berger, Bonnie

2016-06-15

Protein-RNA interactions, which play vital roles in many processes, are mediated through both RNA sequence and structure. CLIP-based methods, which measure protein-RNA binding in vivo, suffer from experimental noise and systematic biases, whereas in vitro experiments capture a clearer signal of protein RNA-binding. Among them, RNAcompete provides binding affinities of a specific protein to more than 240 000 unstructured RNA probes in one experiment. The computational challenge is to infer RNA structure- and sequence-based binding models from these data. The state-of-the-art in sequence models, Deepbind, does not model structural preferences. RNAcontext models both sequence and structure preferences, but is outperformed by GraphProt. Unfortunately, GraphProt cannot detect structural preferences from RNAcompete data due to the unstructured nature of the data, as noted by its developers, nor can it be tractably run on the full RNACompete dataset. We develop RCK, an efficient, scalable algorithm that infers both sequence and structure preferences based on a new k-mer based model. Remarkably, even though RNAcompete data is designed to be unstructured, RCK can still learn structural preferences from it. RCK significantly outperforms both RNAcontext and Deepbind in in vitro binding prediction for 244 RNAcompete experiments. Moreover, RCK is also faster and uses less memory, which enables scalability. While currently on par with existing methods in in vivo binding prediction on a small scale test, we demonstrate that RCK will increasingly benefit from experimentally measured RNA structure profiles as compared to computationally predicted ones. By running RCK on the entire RNAcompete dataset, we generate and provide as a resource a set of protein-RNA structure-based models on an unprecedented scale. Software and models are freely available at http://rck.csail.mit.edu/ bab@mit.edu Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

Population-level preferences for primary care physicians' characteristics in Japan: a structural equation modeling.

PubMed

Takahashi, Osamu; Ohde, Sachiko; Jacobs, Joshua L; Tokuda, Yasuharu; Yanai, Haruo; Okubo, Tomoya; Shimbo, Takuro; Fukuhara, Shunichi; Hinohara, Shigeaki; Fukui, Tsuguya

2010-01-01

Primary care has potential to play a role for improving the patient care in Japanese health care system; however, little information is available about how patients perceive the roles of primary care physicians (PCPs) within the Japanese health care system. We aimed to assess population-level preferences for PCPs and investigated the extent to which preferences vary in relation to different population groups in Japan. Data were extracted from a cross-sectional questionnaire survey in October 2003. An 18-item questionnaire was used to measure the preferences for PCPs. Exploratory factor analysis was performed to identify latent factors, while confirmatory factor analysis was used to evaluate the fit of the structure using structural equation modeling (SEM). Nationally representative sample of the adult Japanese general population was chosen by controlling for age, sex, and the size of cities. A total of 2,453 adults>or=18-years-old were analyzed. SEM provided a 4-factor structural model of the population-level preference for PCPs, such as clinical competence (path coefficient (pc)=0.72), gate-keeping (pc=0.64), communication with patients or specialists (pc=0.49) and high education (pc=0.25) and demonstrated the best goodness-of-fit. Those who were middle aged, have a high family income, and a high level of education, placed more importance on gate-keeping characteristics, and the rural residents emphasized communication rather than clinical competence. Our results indicate that the preferences for PCPs are divided into four main factors and underscore the variation among preferences according to different population groups, such as age, socioeconomic and educational status, and places of living. These variations should be considered to improve the primary care system in Japan.

The Psychometric Properties of the Generalized Anxiety Disorder-7 scale in Hispanic Americans with English or Spanish Language Preference

PubMed Central

Mills, Sarah D.; Fox, Rina S.; Malcarne, Vanessa L.; Roesch, Scott C.; Champagne, Brian R.; Sadler, Georgia Robins

2014-01-01

The Generalized Anxiety Disorder-7 scale (GAD-7) is a self-report questionnaire that is widely used to screen for anxiety. The GAD-7 has been translated into numerous languages, including Spanish. Previous studies evaluating the structural validity of the English and Spanish versions indicate a uni-dimensional factor structure in both languages. However, the psychometric properties of the Spanish language version have yet to be evaluated in samples outside of Spain, and the measure has not been tested for use among Hispanic Americans. This study evaluated the reliability, structural validity, and convergent validity of the English and Spanish language versions of the GAD-7 for Hispanic Americans in the United States. A community sample of 436 Hispanic Americans with an English (n = 210) or Spanish (n = 226) language preference completed the GAD-7. Multiple-group confirmatory factor analysis (CFA) was used to examine the goodness of fit of the uni-dimensional factor structure of the GAD-7 across language-preference groups. Results from the multiple-group CFA indicated a similar unidimensional factor structure with equivalent response patterns and item intercepts, but different variances, across language-preference groups. Internal consistency was good for both English and Spanish language-preference groups. The GAD-7 also evidenced good convergent validity as demonstrated by significant correlations in expected directions with the Perceived Stress Scale, the Patient Health Questionnaire-9, and the Physical health domain of the World Health Organization Quality of Life-BREF assessment. The uni-dimensional GAD-7 is suitable for use among Hispanic Americans with an English or Spanish language preference. PMID:25045957

The structure of musical preferences: a five-factor model.

PubMed

Rentfrow, Peter J; Goldberg, Lewis R; Levitin, Daniel J

2011-06-01

Music is a cross-cultural universal, a ubiquitous activity found in every known human culture. Individuals demonstrate manifestly different preferences in music, and yet relatively little is known about the underlying structure of those preferences. Here, we introduce a model of musical preferences based on listeners' affective reactions to excerpts of music from a wide variety of musical genres. The findings from 3 independent studies converged to suggest that there exists a latent 5-factor structure underlying music preferences that is genre free and reflects primarily emotional/affective responses to music. We have interpreted and labeled these factors as (a) a Mellow factor comprising smooth and relaxing styles; (b) an Unpretentious factor comprising a variety of different styles of sincere and rootsy music such as is often found in country and singer-songwriter genres; (c) a Sophisticated factor that includes classical, operatic, world, and jazz; (d) an Intense factor defined by loud, forceful, and energetic music; and (e) a Contemporary factor defined largely by rhythmic and percussive music, such as is found in rap, funk, and acid jazz. The findings from a fourth study suggest that preferences for the MUSIC factors are affected by both the social and the auditory characteristics of the music. 2011 APA, all rights reserved

Preferences and needs of patients with a rheumatic disease regarding the structure and content of online self-management support.

PubMed

Ammerlaan, Judy W; van Os-Medendorp, Harmieke; de Boer-Nijhof, Nienke; Maat, Bertha; Scholtus, Lieske; Kruize, Aike A; Bijlsma, Johannes W J; Geenen, Rinie

2017-03-01

Aim of this study was to investigate preferences and needs regarding the structure and content of a person-centered online self-management support intervention for patients with a rheumatic disease. A four step procedure, consisting of online focus group interviews, consensus meetings with patient representatives, card sorting task and hierarchical cluster analysis was used to identify the preferences and needs. Preferences concerning the structure involved 1) suitability to individual needs and questions, 2) fit to the life stage 3) creating the opportunity to share experiences, be in contact with others, 4) have an expert patient as trainer, 5) allow for doing the training at one's own pace and 6) offer a brief intervention. Hierarchical cluster analysis of 55 content needs comprised eleven clusters: 1) treatment knowledge, 2) societal procedures, 3) physical activity, 4) psychological distress, 5) self-efficacy, 6) provider, 7) fluctuations, 8) dealing with rheumatic disease, 9) communication, 10) intimate relationship, and 11) having children. A comprehensive assessment of preferences and needs in patients with a rheumatic disease is expected to contribute to motivation, adherence to and outcome of self-management-support programs. The overview of preferences and needs can be used to build an online-line self-management intervention. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The influence of climatic niche preferences on the population genetic structure of a mistletoe species complex.

PubMed

Ramírez-Barahona, Santiago; González, Clementina; González-Rodríguez, Antonio; Ornelas, Juan Francisco

2017-06-01

The prevalent view on genetic structuring in parasitic plants is that host-race formation is caused by varying degrees of host specificity. However, the relative importance of ecological niche divergence and host specificity to population differentiation remains poorly understood. We evaluated the factors associated with population differentiation in mistletoes of the Psittacanthus schiedeanus complex (Loranthaceae) in Mexico. We used genetic data from chloroplast sequences and nuclear microsatellites to study population genetic structure and tested its association with host preferences and climatic niche variables. Pairwise genetic differentiation was associated with environmental and host preferences, independent of geography. However, environmental predictors appeared to be more important than host preferences to explain genetic structure, supporting the hypothesis that the occurrence of the parasite is largely determined by its own climatic niche and, to a lesser degree, by host specificity. Genetic structure is significant within this mistletoe species complex, but the processes associated with this structure appear to be more complex than previously thought. Although host specificity was not supported as the major determinant of population differentiation, we consider this to be part of a more comprehensive ecological model of mistletoe host-race formation that incorporates the effects of climatic niche evolution. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

Goals and organisational structure of the movement for global mental health.

PubMed

Minas, Harry; Wright, Alexandra; Kakuma, Ritsuko

2014-01-01

The Movement for Global Mental Health (MGMH), established in 2008, is in a period of transition, as is the field of global mental health. The transfer of Secretariat functions from the Centre for International Mental Health to the Public Health Foundation of India was a suitable time to reflect on the goals of MGMH and on the form of organisational structure that would best serve the organisation in its efforts to achieve its goals. An online survey was sent to the 4,000 registered members of MGMH seeking the views of the membership on both the goals of MGMH and on the preferred form of organisational structure. There was near unanimous (95%) agreement with the MGMH goals as stated at the time of the survey. The current form of organisation of MGMH, a loose network of individuals and organisations registered through the MGMH website, was the least preferred (29.9%) form of organisation for the future of MGMH. More than two thirds (70.1%) of respondents would prefer a formal legal structure, with 60% of this group favouring a Charitable Organisation structure and 40% preferring an international Association structure. The response rate (7%) was too small and too skewed (predominantly academics and health professionals from high income countries) to allow any clear conclusions to be drawn from the survey. However, both the fact that responses were too few and skewed and the preferences expressed by respondents raise issues for careful consideration by the current MGMH Secretariat. The global mental health field and MGMH are in a time of transition. The move to the new secretariat is an opportunity for systematic consideration of the organisational structure and governance arrangements that will best serve the goals of MGMH.

Goals and organisational structure of the movement for global mental health

PubMed Central

2014-01-01

Background The Movement for Global Mental Health (MGMH), established in 2008, is in a period of transition, as is the field of global mental health. The transfer of Secretariat functions from the Centre for International Mental Health to the Public Health Foundation of India was a suitable time to reflect on the goals of MGMH and on the form of organisational structure that would best serve the organisation in its efforts to achieve its goals. Methods An online survey was sent to the 4,000 registered members of MGMH seeking the views of the membership on both the goals of MGMH and on the preferred form of organisational structure. Results There was near unanimous (95%) agreement with the MGMH goals as stated at the time of the survey. The current form of organisation of MGMH, a loose network of individuals and organisations registered through the MGMH website, was the least preferred (29.9%) form of organisation for the future of MGMH. More than two thirds (70.1%) of respondents would prefer a formal legal structure, with 60% of this group favouring a Charitable Organisation structure and 40% preferring an international Association structure. Discussion The response rate (7%) was too small and too skewed (predominantly academics and health professionals from high income countries) to allow any clear conclusions to be drawn from the survey. However, both the fact that responses were too few and skewed and the preferences expressed by respondents raise issues for careful consideration by the current MGMH Secretariat. Conclusions The global mental health field and MGMH are in a time of transition. The move to the new secretariat is an opportunity for systematic consideration of the organisational structure and governance arrangements that will best serve the goals of MGMH. PMID:25110518

Assessment of Preferences for Treatment: Validation of a Measure

PubMed Central

Sidani, Souraya; Epstein, Dana R.; Bootzin, Richard R.; Moritz, Patricia; Miranda, Joyal

2009-01-01

Systematic measurement of treatment preferences is needed to obtain well-informed preferences. Guided by a conceptualization of treatment preferences, a measure was developed to assess treatment acceptability and preference. The purpose of this study was to evaluate the psychometric properties of the Treatment Acceptability and Preferences (TAP) measure. The TAP measure contains a description of each treatment under evaluation, items to rate its acceptability, and questions about participants’ preferred treatment option. The items measuring treatment acceptability were internally consistent (alpha > .80) and demonstrated validity, evidenced by a one-factor structure and differences in the scores between participants with preferences for particular interventions. The TAP measure has the potential for the assessment of acceptability and preferences for various behavioral interventions. PMID:19434647

Implicit and Explicit Preference Structures in Models of Labor Supply.

ERIC Educational Resources Information Center

Dickinson, Jonathan

The study of labor supply is directed to a theoretical methodology under which the choice of the general functional form of the income-leisure preference structure may be regarded as an empirical question. The author has reviewed the common functional forms employed in empirical labor supply models and has characterized the inherent preference…

A Hierarchical Bayesian Multidimensional Scaling Methodology for Accommodating Both Structural and Preference Heterogeneity

ERIC Educational Resources Information Center

Park, Joonwook; Desarbo, Wayne S.; Liechty, John

2008-01-01

Multidimensional scaling (MDS) models for the analysis of dominance data have been developed in the psychometric and classification literature to simultaneously capture subjects' "preference heterogeneity" and the underlying dimentional structure for a set of designated stimuli in a parsimonious manner. There are two major types of latent utility…

The P600 in Implicit Artificial Grammar Learning.

PubMed

Silva, Susana; Folia, Vasiliki; Hagoort, Peter; Petersson, Karl Magnus

2017-01-01

The suitability of the artificial grammar learning (AGL) paradigm to capture relevant aspects of the acquisition of linguistic structures has been empirically tested in a number of EEG studies. Some have shown a syntax-related P600 component, but it has not been ruled out that the AGL P600 effect is a response to surface features (e.g., subsequence familiarity) rather than the underlying syntax structure. Therefore, in this study, we controlled for the surface characteristics of the test sequences (associative chunk strength) and recorded the EEG before (baseline preference classification) and after (preference and grammaticality classification) exposure to a grammar. After exposure, a typical, centroparietal P600 effect was elicited by grammatical violations and not by unfamiliar subsequences, suggesting that the AGL P600 effect signals a response to structural irregularities. Moreover, preference and grammaticality classification showed a qualitatively similar ERP profile, strengthening the idea that the implicit structural mere-exposure paradigm in combination with preference classification is a suitable alternative to the traditional grammaticality classification test. Copyright © 2016 Cognitive Science Society, Inc.

Study of structure-function relationships in proteins: Techniques and applications ot cytochrome c: Final report January 15, 1988--January 14, 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldstein, D.A.; Rackovsky, S.R.

1989-08-01

During the initial period of this work we explored the differential geometry results which had been used to explain the structure-function relationships in the set of yeast iso-1-cytochrome c mutants studied under the initial contract. In addition we continued the development of techniques which would permit the structural characterization and comparison of proteins in a very efficient manner. We have expanded the studies based on the characterization of the structural preferences of various residues in a sample of twenty six globular proteins. It has been demonstrated that the overall structural preferences and the amino acid specific preferences seen in themore » analysis carried out at the five alpha carbon level can not be explained by the results of the analysis carried out at the four alpha carbon level. Thus the structural preferences seen must be described by considering groups of five or more residues. We do no yet have enough data to extend the analysis to the six alpha carbon unit level. We have also verified that the yeast/tuna structural analogy which we used before was justified, and have performed a conformational energy minimization of the reduced yeast cytochrome c crystal data in order to have a baseline for the study of mutant proteins. 6 refs.« less

Shaping up the protein folding funnel by local interaction: lesson from a structure prediction study.

PubMed

Chikenji, George; Fujitsuka, Yoshimi; Takada, Shoji

2006-02-28

Predicting protein tertiary structure by folding-like simulations is one of the most stringent tests of how much we understand the principle of protein folding. Currently, the most successful method for folding-based structure prediction is the fragment assembly (FA) method. Here, we address why the FA method is so successful and its lesson for the folding problem. To do so, using the FA method, we designed a structure prediction test of "chimera proteins." In the chimera proteins, local structural preference is specific to the target sequences, whereas nonlocal interactions are only sequence-independent compaction forces. We find that these chimera proteins can find the native folds of the intact sequences with high probability indicating dominant roles of the local interactions. We further explore roles of local structural preference by exact calculation of the HP lattice model of proteins. From these results, we suggest principles of protein folding: For small proteins, compact structures that are fully compatible with local structural preference are few, one of which is the native fold. These local biases shape up the funnel-like energy landscape.

Shaping up the protein folding funnel by local interaction: Lesson from a structure prediction study

PubMed Central

Chikenji, George; Fujitsuka, Yoshimi; Takada, Shoji

2006-01-01

Predicting protein tertiary structure by folding-like simulations is one of the most stringent tests of how much we understand the principle of protein folding. Currently, the most successful method for folding-based structure prediction is the fragment assembly (FA) method. Here, we address why the FA method is so successful and its lesson for the folding problem. To do so, using the FA method, we designed a structure prediction test of “chimera proteins.” In the chimera proteins, local structural preference is specific to the target sequences, whereas nonlocal interactions are only sequence-independent compaction forces. We find that these chimera proteins can find the native folds of the intact sequences with high probability indicating dominant roles of the local interactions. We further explore roles of local structural preference by exact calculation of the HP lattice model of proteins. From these results, we suggest principles of protein folding: For small proteins, compact structures that are fully compatible with local structural preference are few, one of which is the native fold. These local biases shape up the funnel-like energy landscape. PMID:16488978

Backbone conformational preferences of an intrinsically disordered protein in solution.

PubMed

Espinoza-Fonseca, L Michel; Ilizaliturri-Flores, Ian; Correa-Basurto, José

2012-06-01

We have performed a 4-μs molecular dynamics simulation to investigate the native conformational preferences of the intrinsically disordered kinase-inducible domain (KID) of the transcription factor CREB in solution. There is solid experimental evidence showing that KID does not possess a bound-like structure in solution; however, it has been proposed that coil-to-helix transitions upon binding to its binding partner (CBP) are template-driven. While these studies indicate that IDPs possess a bias towards the bound structure, they do not provide direct evidence on the time-dependent conformational preferences of IDPs in atomic detail. Our simulation captured intrinsic conformational characteristics of KID that are in good agreement with experimental data such as a very small percentage of helical structure in its segment α(B) and structural disorder in solution. We used dihedral principal component analysis dPCA to map the conformations of KID in the microsecond timescale. By using principal components as reaction coordinates, we further constructed dPCA-based free energy landscapes of KID. Analysis of the free energy landscapes showed that KID is best characterized as a conformational ensemble of rapidly interconverting conformations. Interestingly, we found that despite the conformational heterogeneity of the backbone and the absence of substantial secondary structure, KID does not randomly sample the conformational space in solution: analysis of the (Φ, Ψ) dihedral angles showed that several individual residues of KID possess a strong bias toward the helical region of the Ramachandran plot. We suggest that the intrinsic conformational preferences of KID provide a bias toward the folded state without having to populate bound-like conformations before binding. Furthermore, we argue that these conformational preferences do not represent actual structural constraints which drive binding through a single pathway, which allows for specific interactions with multiple binding partners. Based on this evidence, we propose that the backbone conformational preferences of KID provide a thermodynamic advantage for folding and binding without negatively affecting the kinetics of binding. We further discuss the relation of our results to previous studies to rationalize the functional implications of the conformational preferences of IDPs, such as the optimization of structural disorder in protein-protein interactions. This study illustrates the importance in obtaining atomistic information of intrinsically disordered proteins in real time to reveal functional features arising from their complex conformational space.

Phase Structure and Site Preference Behavior of Ternary Alloying Additions to PdTi and PtTi Shape-Memory Alloys

NASA Technical Reports Server (NTRS)

Bozzolo, Guillermo; Mosca, Hugo O.; Noebe, Ronald D.

2006-01-01

The phasc structure and concentration dependence of the lattice parameter and energy of formation of ternary Pd-'I-X and Pt-Ti-X alloys for a large number of ternary alloying additions X (X = Na, Mg, Al, Si, Sc. V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Y, Zr, Nb, Mo, Tc, Ru, Rh, Ag, Cd, Hf, Ta, W, Re, Os, Ir) are investigated with an atomistic modeling approach. In addition, a detailed description of the site preference behavior of such additions showing that the elements can be grouped according to their absolute preference for a specific site, regardless of concentration, or preference for available sites in the deficient sublattice is provided.

Sequence and conformational preferences at termini of α-helices in membrane proteins: role of the helix environment.

PubMed

Shelar, Ashish; Bansal, Manju

2014-12-01

α-Helices are amongst the most common secondary structural elements seen in membrane proteins and are packed in the form of helix bundles. These α-helices encounter varying external environments (hydrophobic, hydrophilic) that may influence the sequence preferences at their N and C-termini. The role of the external environment in stabilization of the helix termini in membrane proteins is still unknown. Here we analyze α-helices in a high-resolution dataset of integral α-helical membrane proteins and establish that their sequence and conformational preferences differ from those in globular proteins. We specifically examine these preferences at the N and C-termini in helices initiating/terminating inside the membrane core as well as in linkers connecting these transmembrane helices. We find that the sequence preferences and structural motifs at capping (Ncap and Ccap) and near-helical (N' and C') positions are influenced by a combination of features including the membrane environment and the innate helix initiation and termination property of residues forming structural motifs. We also find that a large number of helix termini which do not form any particular capping motif are stabilized by formation of hydrogen bonds and hydrophobic interactions contributed from the neighboring helices in the membrane protein. We further validate the sequence preferences obtained from our analysis with data from an ultradeep sequencing study that identifies evolutionarily conserved amino acids in the rat neurotensin receptor. The results from our analysis provide insights for the secondary structure prediction, modeling and design of membrane proteins. © 2014 Wiley Periodicals, Inc.

The Italian Version of the Cognitive Style Indicator and Its Association with Decision-Making Preferences

ERIC Educational Resources Information Center

Miceli, Silvana; de Palo, Valeria; Monacis, Lucia; Cardaci, Maurizio; Sinatra, Maria

2018-01-01

The Cognitive Style Indicator (CoSI) includes 3 cognitive dimensions: creating (flexible, open-ended and inventive), knowing (emphasizing facts, details, objectivity, and rationality), and planning (guided by preferences for certainty and well-structured information). The first aim of this research was to validate the 3-factor structure of the…

Multi-layer carbon-based coatings for field emission

DOEpatents

Sullivan, John P.; Friedmann, Thomas A.

1998-01-01

A multi-layer resistive carbon film field emitter device for cold cathode field emission applications. The multi-layered film of the present invention consists of at least two layers of a conductive carbon material, preferably amorphous-tetrahedrally coordinated carbon, where the resistivities of adjacent layers differ. For electron emission from the surface, the preferred structure can be a top layer having a lower resistivity than the bottom layer. For edge emitting structures, the preferred structure of the film can be a plurality of carbon layers, where adjacent layers have different resistivities. Through selection of deposition conditions, including the energy of the depositing carbon species, the presence or absence of certain elements such as H, N, inert gases or boron, carbon layers having desired resistivities can be produced.

The Song Remains the Same: A Replication and Extension of the MUSIC Model.

PubMed

Rentfrow, Peter J; Goldberg, Lewis R; Stillwell, David J; Kosinski, Michal; Gosling, Samuel D; Levitin, Daniel J

2012-12-01

There is overwhelming anecdotal and empirical evidence for individual differences in musical preferences. However, little is known about what drives those preferences. Are people drawn to particular musical genres (e.g., rap, jazz) or to certain musical properties (e.g., lively, loud)? Recent findings suggest that musical preferences can be conceptualized in terms of five orthogonal dimensions: Mellow, Unpretentious, Sophisticated, Intense, and Contemporary (conveniently, MUSIC). The aim of the present research is to replicate and extend that work by empirically examining the hypothesis that musical preferences are based on preferences for particular musical properties and psychological attributes as opposed to musical genres. Findings from Study 1 replicated the five-factor MUSIC structure using musical excerpts from a variety of genres and subgenres and revealed musical attributes that differentiate each factor. Results from Studies 2 and 3 show that the MUSIC structure is recoverable using musical pieces from only the jazz and rock genres, respectively. Taken together, the current work provides strong evidence that preferences for music are determined by specific musical attributes and that the MUSIC model is a robust framework for conceptualizing and measuring such preferences.

The Song Remains the Same: A Replication and Extension of the MUSIC Model

PubMed Central

Rentfrow, Peter J.; Goldberg, Lewis R.; Stillwell, David J.; Kosinski, Michal; Gosling, Samuel D.; Levitin, Daniel J.

2012-01-01

There is overwhelming anecdotal and empirical evidence for individual differences in musical preferences. However, little is known about what drives those preferences. Are people drawn to particular musical genres (e.g., rap, jazz) or to certain musical properties (e.g., lively, loud)? Recent findings suggest that musical preferences can be conceptualized in terms of five orthogonal dimensions: Mellow, Unpretentious, Sophisticated, Intense, and Contemporary (conveniently, MUSIC). The aim of the present research is to replicate and extend that work by empirically examining the hypothesis that musical preferences are based on preferences for particular musical properties and psychological attributes as opposed to musical genres. Findings from Study 1 replicated the five-factor MUSIC structure using musical excerpts from a variety of genres and subgenres and revealed musical attributes that differentiate each factor. Results from Studies 2 and 3 show that the MUSIC structure is recoverable using musical pieces from only the jazz and rock genres, respectively. Taken together, the current work provides strong evidence that preferences for music are determined by specific musical attributes and that the MUSIC model is a robust framework for conceptualizing and measuring such preferences. PMID:24825945

A deep learning framework for modeling structural features of RNA-binding protein targets

PubMed Central

Zhang, Sai; Zhou, Jingtian; Hu, Hailin; Gong, Haipeng; Chen, Ligong; Cheng, Chao; Zeng, Jianyang

2016-01-01

RNA-binding proteins (RBPs) play important roles in the post-transcriptional control of RNAs. Identifying RBP binding sites and characterizing RBP binding preferences are key steps toward understanding the basic mechanisms of the post-transcriptional gene regulation. Though numerous computational methods have been developed for modeling RBP binding preferences, discovering a complete structural representation of the RBP targets by integrating their available structural features in all three dimensions is still a challenging task. In this paper, we develop a general and flexible deep learning framework for modeling structural binding preferences and predicting binding sites of RBPs, which takes (predicted) RNA tertiary structural information into account for the first time. Our framework constructs a unified representation that characterizes the structural specificities of RBP targets in all three dimensions, which can be further used to predict novel candidate binding sites and discover potential binding motifs. Through testing on the real CLIP-seq datasets, we have demonstrated that our deep learning framework can automatically extract effective hidden structural features from the encoded raw sequence and structural profiles, and predict accurate RBP binding sites. In addition, we have conducted the first study to show that integrating the additional RNA tertiary structural features can improve the model performance in predicting RBP binding sites, especially for the polypyrimidine tract-binding protein (PTB), which also provides a new evidence to support the view that RBPs may own specific tertiary structural binding preferences. In particular, the tests on the internal ribosome entry site (IRES) segments yield satisfiable results with experimental support from the literature and further demonstrate the necessity of incorporating RNA tertiary structural information into the prediction model. The source code of our approach can be found in https://github.com/thucombio/deepnet-rbp. PMID:26467480

Salt bridges: geometrically specific, designable interactions.

PubMed

Donald, Jason E; Kulp, Daniel W; DeGrado, William F

2011-03-01

Salt bridges occur frequently in proteins, providing conformational specificity and contributing to molecular recognition and catalysis. We present a comprehensive analysis of these interactions in protein structures by surveying a large database of protein structures. Salt bridges between Asp or Glu and His, Arg, or Lys display extremely well-defined geometric preferences. Several previously observed preferences are confirmed, and others that were previously unrecognized are discovered. Salt bridges are explored for their preferences for different separations in sequence and in space, geometric preferences within proteins and at protein-protein interfaces, co-operativity in networked salt bridges, inclusion within metal-binding sites, preference for acidic electrons, apparent conformational side chain entropy reduction on formation, and degree of burial. Salt bridges occur far more frequently between residues at close than distant sequence separations, but, at close distances, there remain strong preferences for salt bridges at specific separations. Specific types of complex salt bridges, involving three or more members, are also discovered. As we observe a strong relationship between the propensity to form a salt bridge and the placement of salt-bridging residues in protein sequences, we discuss the role that salt bridges might play in kinetically influencing protein folding and thermodynamically stabilizing the native conformation. We also develop a quantitative method to select appropriate crystal structure resolution and B-factor cutoffs. Detailed knowledge of these geometric and sequence dependences should aid de novo design and prediction algorithms. Copyright © 2010 Wiley-Liss, Inc.

Nursing students at a university - a study about learning style preferences.

PubMed

Hallin, Karin

2014-12-01

In most adult education, teachers use methods that assume all students learn in the same way. But knowledge of students' learning style preferences highlights the importance of adequate teaching and learning adaptation. The aim of the study was to describe and compare final year nursing students' learning style preferences in two campuses during three semesters. A further aim was to identify differences between learning style preferences and personal characteristics. A descriptive cross-sectional study using the Productivity Environmental Preference Survey (PEPS) questionnaire was conducted at a Swedish rural university. Three semester groups with 263 nursing students participated in 2012-2013. The majority of the students were 'flexible' in their learning style preferences and had none or few strong preferences. Students with strong preferences preferred high structure (75%) and an authority figure present (40%). About a third were highly auditory, tactile and/or kinesthetic while 8% were highly visual. Few significant differences were revealed between the groups of campuses and the groups of semesters or between learning style preferences and upper secondary school and care experience. There were no significant differences between learning style preferences and age and assistant nurse graduation. More women than men were highly motivated, auditory, tactile and kinesthetic and preferred structure and mobility. The PEPS questionnaire provides nursing students with self-awareness regarding their strengths and shortcomings in learning and teachers with a valuable and practical basis for their selection of adapted individual and group teaching methods. The findings suggest the need for wide variation and interactive teaching approaches, conscious didactic actions between cooperating teachers and conscious learning strategies for nursing students. Copyright © 2014 Elsevier Ltd. All rights reserved.

Finger materials for air cushion vehicles. Volume 2: Base fabrics for finger materials

NASA Astrophysics Data System (ADS)

Schoppee, M. M.; Skelton, J.; Toney, M. M.; Klemens, W.

1984-12-01

Since the short lifetimes of seal/skirt systems on surface effect vehicles (SEV's) severely limit the long-term serviceability on such craft, a systematic study was undertaken to evaluate the effects of fabric structure on the performance of rubber/fabric skirt materials under conditions of high speed, high-curvature flexing. A series of nylon fabrics was designed and manufactured in which the fiber denier, yarn denier, yarn twist, yarn crimp, weave pattern and float length were varied, but in which the tensile strength was kept constant throughout. Each one of the fabrics was rubber-coated using the same natural rubber/polybutadiene blend and the same coating technique. A flex-testing apparatus was designed and built for flexing the rubber/fabric composite materials in air at an average radius of curvature of 0.28 in. at a cycling frequency of 15 Hz. The lifetimes in flex of the experimental series of fabrics, as indicated by the appearance of flex cracks in the rubber layer, ranged from a low of 140,000 cycles to a high of 21.7 million cycles, a range of over two orders of magnitude. Factorial analysis of the test results showed that lower yarn denier, lower yarn crimp, and shorter float length (plain weave) in the fabric substrate offer significant advantages in the ability of the fabric to withstand flexing. Design of three broad fabrics for full-scale skirt trials on the SRN4 craft is described.

Nature and properties of ionomer assemblies. II.

PubMed

Capek, Ignác

2005-12-30

The principle subject in the current paper is to summarize and characterize the ionomers based on polymers and copolymers such as polystyrene (PSt), polyisoprene (PIP), polybutadiene (PB), poly(styrene-b-isobutylene-b-styrene) (PSt-PIB-PSt), poly(butadiene-styrene) (PB-PSt), poly(ethylene terephthalate) (PET), poly(butylene adipate) (PBA), poly(butylene succinate) (PBSi), poly(dimethylcarbosiloxanes), polyurethane, etc. The self-assembly of ionomers, models concerning ionomer morphologies, physical and rheological properties of ionomer phase and percolation behavior of ionomers were discussed. The ionomer phase materials and dispersions have been characterized by differential scanning calorimetry (DSC), small-angle X-ray catering (SAXS), small-angle neutron scattering (SANS), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), etc. The wide range of compositions, molecular architectures, and morphologies present in ionomeric disperse systems are of great interest. The research is particularly devoted to the potential application of these materials and an understanding of the fundamental principles of the ionomers. They are extremely complex systems, sensitive to changes in structure and composition, and therefore not easily amenable to modeling and to the derivation of general patterns of behavior. The reviewed data indicate that a large number of parameters are important in influencing multiplet formation and clustering in random ionomers. Among these are the ion content, size of the polyion and counterion, dielectric constant of the host, T(g) of the polymer, rigidity or persistence length of the backbone, position of the ion pair relative to the backbone, steric constraints, amount and nature of added additive (plasticizer), thermal history, etc.

The Effect of Overtly Categorizing Music on Preference for Popular Music Styles.

ERIC Educational Resources Information Center

Brittin, Ruth V.

1991-01-01

Presents results of a study that explored the effect of overt categorization on musical preference. Found no difference in choices of nonmusic majors when choices were structured as stipulated, unstipulated, or free form categories. Finds musical experience and gender affected preferences for pop and jazz, but not for rock music. (DK)

Student reflections on learning with challenging tasks: `I think the worksheets were just for practice, and the challenges were for maths'

NASA Astrophysics Data System (ADS)

Russo, James; Hopkins, Sarah

2017-09-01

The current study considered young students' (7 and 8 years old) experiences and perceptions of mathematics lessons involving challenging (i.e. cognitively demanding) tasks. We used the Constant Comparative Method to analyse the interview responses ( n = 73) regarding what work artefacts students were most proud of creating and why. Five themes emerged that characterised student reflections: enjoyment, effort, learning, productivity and meaningful mathematics. Overall, there was evidence that students embraced struggle and persisted when engaged in mathematics lessons involving challenging tasks and, moreover, that many students enjoyed the process of being challenged. In the second section of the paper, the lesson structure preferences of a subset of participants ( n = 23) when learning with challenging tasks are considered. Overall, more students preferred the teach-first lesson structure to the task-first lesson structure, primarily because it activated their cognition to prepare them for work on the challenging task. However, a substantial minority of students (42 %) instead endorsed the task-first lesson structure, with several students explaining they preferred this structure precisely because it was so cognitively demanding. Other reasons for preferring the task-first structure included that it allowed the focus of the lesson to be on the challenging task and the subsequent discussion of student work. A key implication of these combined findings is that, for many students, work on challenging tasks appeared to remain cognitively demanding irrespective of the structure of the lesson.

LEED STUDY OF Ag(111)-(√ 7×√ 7)R19.1^o-4Ar

NASA Astrophysics Data System (ADS)

Caragiu, Mellita; Diehl, Renee D.; Leatherman, Gerry S.

2000-03-01

Recent LEED studies of the adsorption geometries of Xe and Kr on metal surfaces have indicated that, contrary to expectations, the low-coordination adsorption sites are generally preferred, even on relatively corrugated surfaces such as Cu(1\\overline 1 0). This study extends the range of this phenomenon to include Ar. On Ag(111), Ar can form a commensurate structure, Ag(111)-(√ 7×√ 7)R19.1^o-4Ar, if the step sites are first blocked by preadsorbing another species such as CO. A dynamical LEED analysis of this structure at 33K indicates that the structure includes one atom per unit cell on a top site and the remaining three on bridge sites. This structure is clearly preferred over ones in which hollow sites are occupied, providing evidence that the preference of noble gases atoms for low-coordination sites on metals extends to Ar.

In-situ sputtering apparatus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, Mark R.; Poole, Henry J.; Custer, III, Arthur W.

A sputtering apparatus that includes at least a target presented as an inner surface of a confinement structure, the inner surface of the confinement structure is preferably an internal wall of a circular tube. A cathode is disposed adjacent the internal wall of the circular tube. The cathode preferably provides a hollow core, within which a magnetron is disposed. Preferably, an actuator is attached to the magnetron, wherein a position of the magnetron within the hollow core is altered upon activation of the actuator. Additionally, a carriage supporting the cathode and communicating with the target is preferably provided, and amore » cable bundle interacting with the cathode and linked to a cable bundle take up mechanism provided power and coolant to the cathode, magnetron, actuator and an anode of the sputtering apparatus.« less

Structural effect of size on interracial friendship

PubMed Central

Cheng, Siwei; Xie, Yu

2013-01-01

Social contexts exert structural effects on individuals’ social relationships, including interracial friendships. In this study, we posit that, net of group composition, total context size has a distinct effect on interracial friendship. Under the assumptions of (i) maximization of preference in choosing a friend, (ii) multidimensionality of preference, and (iii) preference for same-race friends, we conducted analyses using microsimulation that yielded three main findings. First, increased context size decreases the likelihood of forming an interracial friendship. Second, the size effect increases with the number of preference dimensions. Third, the size effect is diluted by noise, i.e., the random component affecting friendship formation. Analysis of actual friendship data among 4,745 American high school students yielded results consistent with the main conclusion that increased context size promotes racial segregation and discourages interracial friendship. PMID:23589848

Design and Fabrication of a 200N Thrust Rocket Motor Based on NH4ClO4+Al+HTPB as Solid Propellant

NASA Astrophysics Data System (ADS)

Wahid, Mastura Ab; Ali, Wan Khairuddin Wan

2010-06-01

The development of rocket motor using potassium nitrate, carbon and sulphur mixture has successfully been developed by researchers and students from UTM and recently a new combination for solid propellant is being created. The new solid propellant will combine a composition of Ammonium perchlorate, NH4ClO4 with aluminium, Al and Hydroxyl Terminated Polybutadiene, HTPB as the binder. It is the aim of this research to design and fabricate a new rocket motor that will produce a thrust of 200N by using this new solid propellant. A static test is done to obtain the thrust produced by the rocket motor and analyses by observation and also calculation will be done. The experiment for the rocket motor is successful but the thrust did not achieve its required thrust.

Application of Liquid Paraffin in Castable CL-20-Based PBX

NASA Astrophysics Data System (ADS)

Zhang, Pu; Guo, Xue-Yong; Zhang, Jing-Yuan; Jiao, Qing-Jie

2014-10-01

Hydroxy-terminated polybutadiene (HTPB)/CL-20 castable explosives plasticized with liquid paraffin were processed successfully by a cast-curing method. The compatibility of liquid paraffin with CL-20, influence of liquid paraffin on CL-20 phase transition, and viscosity of the cast mixture were tested and analyzed. The thermal decomposition characteristics, thermal stability, mechanical sensitivity, and velocity of detonation (VOD) of the HTPB/CL-20 plastic-bonded explosives (PBXs) were also measured. The experimental results showed that liquid paraffin was well compatible with CL-20, and it did not have a distinct effect on the ɛ- to γ-phase transition of CL-20. In addition, the casting mixture was free-flowing with sufficiently low viscosity. When the content of CL-20 is 90% by weight, the measured VOD reached 8,775 m/s (density of 1.78 g/cm3), and the PBXs exhibited moderate mechanical sensitivity and good thermal stability.

Three-Dimensional Simulation of Base Bleed Unit with AP/HTPB Propellant in Fast Cook-off Conditions

NASA Astrophysics Data System (ADS)

Li, Wen-feng; Yu, Yong-gang; Ye, Rui; Yang, Hou-wen

2017-07-01

In this work, a three-dimensional unsteady heat transfer model of base bleed unit with trilobite ammonium perchlorate (AP)/hydroxyl-terminated polybutadiene (HTPB) composite solid propellant is presented to analyze the cook-off characteristics. According to the two-step chemical reaction of AP/HTPB propellant, a small-scale cook-off test is established. A comparison of the experimental and calculated results is made to verify the rationality of the computation model. On this basis, a cook-off numerical simulation of the base bleed unit at the heating rates of 0.33, 0.58 and 0.83 K/s is presented to investigate the ignition and initiation characteristics. The results show that the ignitions occur on the head face of the AP/HTPB propellant and near the internal gas chamber in these conditions. As the heating rate increases, the runaway time decreases and the ignition temperature rises.

Development and testing of 11- and 24-inch hybrid motors under the joint government/industry IR&D program

NASA Technical Reports Server (NTRS)

Boardman, T. A.; Carpenter, R. L.; Goldberg, B. E.; Shaeffer, C. W.

1993-01-01

Establishment of a test facility and associated 11-in.-diameter motor for hybrid propulsion technology development at NASA's George C. Marshall Space Flight Center is discussed in this paper. Results of twenty 11-in.-diameter motor tests with a UTF-29901 (60 percent polycyclopentadiene, 40 percent hydroxyl-terminated polybutadiene)/gaseous oxygen propellant system are presented. Tests at this scale have developed fuel regression correlations for comparison with results of yet-to-be-completed, 24-in.-diameter motor tests; demonstrated combustion efficiency levels in the 95 percent range for both single- and multiple-port grain configurations; have shown smooth and stable throttling characteristics over flight-type throttle ranges; and have begun to establish criteria for stable combustion in hybrid motors. The testing of 24-in. motors has not as yet been initiated and is not addressed.

Final Report

NASA Technical Reports Server (NTRS)

1995-01-01

This cooperative agreement explored the novel polymerization of vinylsilane, alone and in combination with other alkenylsilanes, alkylsilanes, and/or crosslinking agents, using dimethyltitanocene as homogeneous catalyst. The reactions were found to be initiated photochemically under mild conditions, and no hydrogen gas was evolved when alkenylsilanes were polymerized. The polymers were found to have predominately a carbosilane-type backbone containing -SiH2-CH2-CH2-Si and -SiH2-CH(CH3)-Si type linkages. The mechanism of polymerization was found to be step-growth. Despite the relatively low molecular weight of the polymer (M(sub n) - 500 and M(sub W) - 1500), pyrolysis resulted in conversion to C-rich SiC ceramic in high char yields (-60%). Copolymerization with methylsilane resulted in higher chars and more crystalline polymer. Addition of crosslinking agents such as polybutadiene or methyltrivinylsilane increased the viscosity of the polymer produced and enabled application as coatings to fiber toes.

Effect of surfactant species and electrophoretic medium composition on the electrophoretic behavior of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis.

PubMed

Fukai, Nao; Kitagawa, Shinya; Ohtani, Hajime

2017-07-01

We have recently demonstrated the separation of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis (NACZE) using a cationic surfactant of cetyltrimethylammonium chloride (CTAC). In this study, eight ionic surfactants were investigated for the separation of four synthetic polymers (polystyrene, polymethylmethacrylates, polybutadiene, and polycarbonate); only three surfactants (CTAC, dimethyldioctadecylammonium bromide, and sodium dodecylsulfate) caused their separation. The order of the interaction between the polymers and the surfactants depended on both the surfactant species and the composition of the electrophoretic medium. Their investigation revealed that the separation is majorly affected by the hydrophobic interactions between the polymers and the ionic surfactants. In addition, the electrophoretic behavior of polycarbonate suggested that electrostatic interaction also affects the selectivity of the polymers. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Development of the Algol III solid rocket motor for SCOUT.

NASA Technical Reports Server (NTRS)

Felix, B. R.; Mcbride, N. M.

1971-01-01

The design and performance of a motor developed for the first stage of the NASA SCOUT-D and E launch vehicles are discussed. The motor delivers a 30% higher total impulse and a 35 to 45% higher payload mass capability than its predecessor, the Algol IIB. The motor is 45 in. in diameter, has a length-to-diameter ratio of 8:1 and delivers an average 100,000-lb thrust for an action time of 72 sec. The motor design features a very high volumetrically loaded internal-burning charge of 17% aluminized polybutadiene propellant, a plasma-welded and heat-treated steel alloy case, and an all-ablative plastic nose liner enclosed in a steel shell. The only significant development problem was the grain design tailoring to account for erosive burning effects which occurred in the high-subsonic-Mach-number port. The tests performed on the motor are described.

"Lösen Sie Schachtelsätze Möglichst Auf"': The Impact of Editorial Guidelines on Sentence Splitting in German Business Article Translations

ERIC Educational Resources Information Center

Bisiada, Mario

2016-01-01

Sentence splitting is assumed to occur mainly in translations from languages that prefer a hierarchical discourse structure, such as German, to languages that prefer an incremental structure. This article challenges that assumption by presenting findings from a diachronic corpus study of English-German business article translations, which shows…

Who Chooses Incentivized Pay Structures? Exploring the Link between Performance and Preferences for Compensation Reform in the Teacher Labor Market

ERIC Educational Resources Information Center

Goldhaber, Dan; Bignell, Wes; Farley, Amy; Walch, Joe; Cowan, James

2016-01-01

We report on research examining the revealed preferences of teachers in Denver Public Schools who were given the opportunity to select between remaining on a traditional salary schedule and opting into one of the nation's high-profile pay reform systems, Denver's Professional Compensation System for Teachers. The incentive structure creates…

Habitat preferences of a corallivorous reef fish: predation risk versus food quality

NASA Astrophysics Data System (ADS)

Brooker, R. M.; Munday, P. L.; Mcleod, I. M.; Jones, G. P.

2013-09-01

Many animals preferentially select a habitat from a range of those potentially available. However, the consequences of these preferences for distribution and abundance, and the underlying basis of habitat preferences are often unknown. The present study, conducted at Great Keppel Island, Australia, examined how distribution and abundance of an obligate corallivorous filefish, Oxymonacanthus longirostris, relates to coral architecture and diversity. The main drivers of the distribution and abundance of O. longirostris among reefs were coral species richness and availability of branching coral. Feeding territories had a higher percentage of Acropora coral than surrounding habitat. In addition, feeding territories had a higher percentage of the structurally important branching coral, Acropora nobilis, and a primary prey species, Acropora millepora. A series of pair-wise choice experiments in which both structural complexity and coral tissue quality were independently manipulated showed that habitat choice was primarily based on structural complexity and shelter characteristics. In addition, the choice for the preferred coral ( A. nobilis) was stronger in the presence of a piscivorous fish. These results indicate that species-diverse coral habitats, which provide sufficient structural complexity along with nutritionally important prey, are essential for population persistence of this small, corallivorous reef fish.

Seeking structure in social organization: compensatory control and the psychological advantages of hierarchy.

PubMed

Friesen, Justin P; Kay, Aaron C; Eibach, Richard P; Galinsky, Adam D

2014-04-01

Hierarchies are a ubiquitous form of human social organization. We hypothesized that 1 reason for the prevalence of hierarchies is that they offer structure and therefore satisfy the core motivational needs for order and control relative to less structured forms of social organization. This hypothesis is rooted in compensatory control theory, which posits that (a) individuals have a basic need to perceive the world as orderly and structured, and (b) personal and external sources of control are capable of satisfying this need because both serve the comforting belief that the world operates in an orderly fashion. Our first 2 studies confirmed that hierarchies were perceived as more structured and orderly relative to egalitarian arrangements (Study 1) and that working in a hierarchical workplace promotes a feeling of self-efficacy (Study 2). We threatened participants' sense of personal control and measured perceptions of and preferences for hierarchy in 5 subsequent experiments. Participants who lacked control perceived more hierarchy occurring in ambiguous social situations (Study 3) and preferred hierarchy more strongly in workplace contexts (Studies 4-5). We also provide evidence that hierarchies are indeed appealing because of their structure: Preference for hierarchy was higher among individuals high in Personal Need for Structure and a control threat increased preference for hierarchy even among participants low in Personal Need for Structure (Study 5). Framing a hierarchy as unstructured reversed the effect of control threat on hierarchy (Study 6). Finally, hierarchy-enhancing jobs were more appealing after control threat, even when they were low in power and status (Study 7). (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Multi-layer carbon-based coatings for field emission

DOEpatents

Sullivan, J.P.; Friedmann, T.A.

1998-10-13

A multi-layer resistive carbon film field emitter device for cold cathode field emission applications is disclosed. The multi-layered film of the present invention consists of at least two layers of a conductive carbon material, preferably amorphous-tetrahedrally coordinated carbon, where the resistivities of adjacent layers differ. For electron emission from the surface, the preferred structure can be a top layer having a lower resistivity than the bottom layer. For edge emitting structures, the preferred structure of the film can be a plurality of carbon layers, where adjacent layers have different resistivities. Through selection of deposition conditions, including the energy of the depositing carbon species, the presence or absence of certain elements such as H, N, inert gases or boron, carbon layers having desired resistivities can be produced. 8 figs.

Membrane-lined foundations for liquid thermal storage

NASA Astrophysics Data System (ADS)

Bourne, R. C.

1981-06-01

The membrane lined storage (MLS) container which is a spinoff of vinyl-lined swimming pool and waterbed technologies was developed. The state of development of MLS was evaluated and concepts for MLS structural and heat transfer systems were improved. Preferred structural supports were identified and designed for 1500 gal MLS containers for basement, crawl space, and slab-on-grade foundation types. Techniques are developed to provide space heating via forced air through a finned storage jacket for the two preferred structural enclosure designs. Cost effectiveness of the direct air heating technique is evaluated. Alternate free convection domestic water preheaters and a preferred heat exchanger material is selected. Collector and space heat inlet/outlet designs, design concepts for auxiliary heat input to MLS from resistance electric, combustion, and heat pump sources are developed.

Binding Preferences of Amino Acids for Gold Nanoparticles: A Molecular Simulation Study.

PubMed

Shao, Qing; Hall, Carol K

2016-08-09

A better understanding of the binding preference of amino acids for gold nanoparticles of different diameters could aid in the design of peptides that bind specifically to nanoparticles of a given diameter. Here we identify the binding preference of 19 natural amino acids for three gold nanoparticles with diameters of 1.0, 2.0, and 4.0 nm, and investigate the mechanisms that govern these preferences. We calculate potentials of mean force between 36 entities (19 amino acids and 17 side chains) and the three gold nanoparticles in explicit water using well-tempered metadynamics simulations. Comparing these potentials of mean force determines the amino acids' nanoparticle binding preferences and if these preferences are controlled by the backbone, the side chain, or both. Twelve amino acids prefer to bind to the 4.0 nm gold nanoparticle, and seven prefer to bind to the 2.0 nm one. We also use atomistic molecular dynamics simulations to investigate how water molecules near the nanoparticle influence the binding of the amino acids. The solvation shells of the larger nanoparticles have higher water densities than those of the smaller nanoparticles while the orientation distributions of the water molecules in the shells of all three nanoparticles are similar. The nanoparticle preferences of the amino acids depend on whether their binding free energy is determined mainly by their ability to replace or to reorient water molecules in the nanoparticle solvation shell. The amino acids whose binding free energy depends mainly on the replacement of water molecules are likely to prefer to bind to the largest nanoparticle and tend to have relatively simple side chain structures. Those whose binding free energy depends mainly on their ability to reorient water molecules prefer a smaller nanoparticle and tend to have more complex side chain structures.

Four Characteristics of Facebook Activities for English Language Learning: A Study of Malaysian University Students' Needs and Preferences

ERIC Educational Resources Information Center

Kasuma, Shaidatul Akma Adi

2017-01-01

This paper identifies Malaysian university students' needs and preferences for online English language activities on a Facebook group that supports their formal learning. Two methods of data collection were employed; content analysis of the Facebook interactions, and semi structured interviews. Four main learning preferences or characteristics of…

Stated Preference Survey Estimating the Willingness to Pay ...

EPA Pesticide Factsheets

A national stated preference survey designed to elicit household willingness to pay for reductions in impinged and entrained fish at cooling water intake structures. To improve estimation of environmental benefits estimation

Thin film composition with biological substance and method of making

DOEpatents

Campbell, Allison A.; Song, Lin

1999-01-01

The invention provides a thin-film composition comprising an underlying substrate of a first material including a plurality of attachment sites; a plurality of functional groups chemically attached to the attachment sites of the underlying substrate; and a thin film of a second material deposited onto the attachment sites of the underlying substrate, and a biologically active substance deposited with the thin-film. Preferably the functional groups are attached to a self assembling monolayer attached to the underlying substrate. Preferred functional groups attached to the underlying substrate are chosen from the group consisting of carboxylates, sulfonates, phosphates, optionally substituted, linear or cyclo, alkyl, alkene, alkyne, aryl, alkylaryl, amine, hydroxyl, thiol, silyl, phosphoryl, cyano, metallocenyl, carbonyl, and polyphosphate. Preferred materials for the underlying substrate are selected from the group consisting of a metal, a metal alloy, a plastic, a polymer, a proteic film, a membrane, a glass or a ceramic. The second material is selected from the group consisting of inorganic crystalline structures, inorganic amorphus structures, organic crystalline structures, and organic amorphus structures. Preferred second materials are phosphates, especially calcium phosphates and most particularly calcium apatite. The biologically active molecule is a protein, peptide, DNA segment, RNA segment, nucleotide, polynucleotide, nucleoside, antibiotic, antimicrobal, radioisotope, chelated radioisotope, chelated metal, metal salt, anti-inflamatory, steriod, nonsteriod anti-inflammatory, analgesic, antihistamine, receptor binding agent, or chemotherapeutic agent, or other biologically active material. Preferably the biologically active molecule is an osteogenic factor the compositions listed above.

Locality and Word Order in Active Dependency Formation in Bangla.

PubMed

Chacón, Dustin A; Imtiaz, Mashrur; Dasgupta, Shirsho; Murshed, Sikder M; Dan, Mina; Phillips, Colin

2016-01-01

Research on filler-gap dependencies has revealed that there are constraints on possible gap sites, and that real-time sentence processing is sensitive to these constraints. This work has shown that comprehenders have preferences for potential gap sites, and immediately detect when these preferences are not met. However, neither the mechanisms that select preferred gap sites nor the mechanisms used to detect whether these preferences are met are well-understood. In this paper, we report on three experiments in Bangla, a language in which gaps may occur in either a pre-verbal embedded clause or a post-verbal embedded clause. This word order variation allows us to manipulate whether the first gap linearly available is contained in the same clause as the filler, which allows us to dissociate structural locality from linear locality. In Experiment 1, an untimed ambiguity resolution task, we found a global bias to resolve a filler-gap dependency with the first gap linearly available, regardless of structural hierarchy. In Experiments 2 and 3, which use the filled-gap paradigm, we found sensitivity to disruption only when the blocked gap site is both structurally and linearly local, i.e., the filler and the gap site are contained in the same clause. This suggests that comprehenders may not show sensitivity to the disruption of all preferred gap resolutions.

Analysis of the Relation between Academic Procrastination, Academic Rational/Irrational Beliefs, Time Preferences to Study for Exams, and Academic Achievement: A Structural Model

ERIC Educational Resources Information Center

Balkis, Murat; Duru, Erdinc; Bulus, Mustafa

2013-01-01

The purpose of this study was to investigate the relations between academic rational/irrational beliefs, academic procrastination, and time preferences to study for exams and academic achievement by using the structural equation model. The sample consisted of 281 undergraduate students who filled in questionnaires at the 7-week-long summer course.…

Mars Ascent Vehicle-Propellant Aging

NASA Technical Reports Server (NTRS)

Dankanich, John; Rousseau, Jeremy; Williams, Jacob

2015-01-01

This project is to develop and test a new propellant formulation specifically for the Mars Ascent Vehicle (MAV) for the robotic Mars Sample Return mission. The project was initiated under the Planetary Sciences Division In-Space Propulsion Technology (ISPT) program and is continuing under the Mars Exploration Program. The two-stage, solid motor-based MAV has been the leading MAV solution for more than a decade. Additional studies show promise for alternative technologies including hybrid and bipropellant options, but the solid motor design has significant propellant density advantages well suited for physical constraints imposed while using the SkyCrane descent stage. The solid motor concept has lower specific impulse (Isp) than alternatives, but if the first stage and payload remain sufficiently small, the two-stage solid MAV represents a potential low risk approach to meet the mission needs. As the need date for the MAV slips, opportunities exist to advance technology with high on-ramp potential. The baseline propellant for the MAV is currently the carboxyl terminated polybutadiene (CTPB) based formulation TP-H-3062 due to its advantageous low temperature mechanical properties and flight heritage. However, the flight heritage is limited and outside the environments, the MAV must endure. The ISPT program competed a propellant formulation project with industry and selected ATK to develop a new propellant formulation specifically for the MAV application. Working with ATK, a large number of propellant formulations were assessed to either increase performance of a CTPB propellant or improve the low temperature mechanical properties of a hydroxyl terminated polybutadiene (HTPB) propellant. Both propellants demonstrated potential to increase performance over heritage options, but an HTPB propellant formulation, TP-H-3544, was selected for production and testing. The test plan includes propellant aging first at high vacuum conditions, representative of the Mars transit, followed by an additional year at simulated Mars surface conditions. The actual Mars surface environment is based on the igloo design, actively maintains the propellant at or above -40 degC, 95% carbon dioxide at Mars surface pressure. The NASA Marshall Space Flight Center (MSFC) Mars environment test facility is shown in figure 1 and located in the East Test area of Redstone Arsenal due to storage of live propellants. The facility consists of a vacuum chamber placed inside a large freezer unit. The facility includes pressure and temperature monitoring equipment in addition to a vacuum quality monitoring system spectrometer to record any outgassing products.

Unbiased, scalable sampling of protein loop conformations from probabilistic priors.

PubMed

Zhang, Yajia; Hauser, Kris

2013-01-01

Protein loops are flexible structures that are intimately tied to function, but understanding loop motion and generating loop conformation ensembles remain significant computational challenges. Discrete search techniques scale poorly to large loops, optimization and molecular dynamics techniques are prone to local minima, and inverse kinematics techniques can only incorporate structural preferences in adhoc fashion. This paper presents Sub-Loop Inverse Kinematics Monte Carlo (SLIKMC), a new Markov chain Monte Carlo algorithm for generating conformations of closed loops according to experimentally available, heterogeneous structural preferences. Our simulation experiments demonstrate that the method computes high-scoring conformations of large loops (>10 residues) orders of magnitude faster than standard Monte Carlo and discrete search techniques. Two new developments contribute to the scalability of the new method. First, structural preferences are specified via a probabilistic graphical model (PGM) that links conformation variables, spatial variables (e.g., atom positions), constraints and prior information in a unified framework. The method uses a sparse PGM that exploits locality of interactions between atoms and residues. Second, a novel method for sampling sub-loops is developed to generate statistically unbiased samples of probability densities restricted by loop-closure constraints. Numerical experiments confirm that SLIKMC generates conformation ensembles that are statistically consistent with specified structural preferences. Protein conformations with 100+ residues are sampled on standard PC hardware in seconds. Application to proteins involved in ion-binding demonstrate its potential as a tool for loop ensemble generation and missing structure completion.

Unbiased, scalable sampling of protein loop conformations from probabilistic priors

PubMed Central

2013-01-01

Background Protein loops are flexible structures that are intimately tied to function, but understanding loop motion and generating loop conformation ensembles remain significant computational challenges. Discrete search techniques scale poorly to large loops, optimization and molecular dynamics techniques are prone to local minima, and inverse kinematics techniques can only incorporate structural preferences in adhoc fashion. This paper presents Sub-Loop Inverse Kinematics Monte Carlo (SLIKMC), a new Markov chain Monte Carlo algorithm for generating conformations of closed loops according to experimentally available, heterogeneous structural preferences. Results Our simulation experiments demonstrate that the method computes high-scoring conformations of large loops (>10 residues) orders of magnitude faster than standard Monte Carlo and discrete search techniques. Two new developments contribute to the scalability of the new method. First, structural preferences are specified via a probabilistic graphical model (PGM) that links conformation variables, spatial variables (e.g., atom positions), constraints and prior information in a unified framework. The method uses a sparse PGM that exploits locality of interactions between atoms and residues. Second, a novel method for sampling sub-loops is developed to generate statistically unbiased samples of probability densities restricted by loop-closure constraints. Conclusion Numerical experiments confirm that SLIKMC generates conformation ensembles that are statistically consistent with specified structural preferences. Protein conformations with 100+ residues are sampled on standard PC hardware in seconds. Application to proteins involved in ion-binding demonstrate its potential as a tool for loop ensemble generation and missing structure completion. PMID:24565175

Modified Amber Force Field Correctly Models the Conformational Preference for Tandem GA pairs in RNA

PubMed Central

2015-01-01

Molecular mechanics with all-atom models was used to understand the conformational preference of tandem guanine-adenine (GA) noncanonical pairs in RNA. These tandem GA pairs play important roles in determining stability, flexibility, and structural dynamics of RNA tertiary structures. Previous solution structures showed that these tandem GA pairs adopt either imino (cis Watson–Crick/Watson–Crick A-G) or sheared (trans Hoogsteen/sugar edge A-G) conformations depending on the sequence and orientation of the adjacent closing base pairs. The solution structures (GCGGACGC)2 [Biochemistry, 1996, 35, 9677–9689] and (GCGGAUGC)2 [Biochemistry, 2007, 46, 1511–1522] demonstrate imino and sheared conformations for the two central GA pairs, respectively. These systems were studied using molecular dynamics and free energy change calculations for conformational changes, using umbrella sampling. For the structures to maintain their native conformations during molecular dynamics simulations, a modification to the standard Amber ff10 force field was required, which allowed the amino group of guanine to leave the plane of the base [J. Chem. Theory Comput., 2009, 5, 2088–2100] and form out-of-plane hydrogen bonds with a cross-strand cytosine or uracil. The requirement for this modification suggests the importance of out-of-plane hydrogen bonds in stabilizing the native structures. Free energy change calculations for each sequence demonstrated the correct conformational preference when the force field modification was used, but the extent of the preference is underestimated. PMID:24803859

Radiology reporting-from Hemingway to HAL?

PubMed

Brady, Adrian P

2018-04-01

The job of the diagnostic radiologist is two-fold: identifying and interpreting the information available from diagnostic imaging studies and communicating that interpretation meaningfully to the referring clinician. However skilled our interpretive abilities, our patients are not well served if we fail to convey our conclusions effectively. Despite the central importance of communication skills to the work of radiologists, trainees rarely receive significant formal training in reporting skills, and much of the training given simply reflects the trainer's personal preferences. Studies have shown a preference among referrers for reports in a structured form, with findings given in a standard manner, followed by a conclusion. The technical competence to incorporate structured report templates into PACS/RIS systems is growing, "...and radiology societies (including the European Society of Radiology (ESR)) are active in producing and validating templates for a wide range of modalities and clinical circumstances. While some radiologists may prefer prose format reports, and much literature has been produced addressing "dos and don'ts" for such prose reports, it seems likely that structured reporting will become the norm in the near future. Benefits will include homogenisation and standardisation of reports, certainty that significant information has not been omitted, and capacity for data-mining of structured reports for research and teaching purposes. • The radiologist's job includes interpretation of imaging studies AND communication. • Traditionally, communication has taken the form of a prose report. • Referrers have been shown to prefer reports in a structured format. • Structured reports have many advantages over traditional prose reports. • It is likely that structured reports represent the future standard.

Eliciting consumer preferences for health plans.

PubMed

Booske, B C; Sainfort, F; Hundt, A S

1999-10-01

To examine (1) what people say is important to them in choosing a health plan; (2) the effect, if any, that giving health plan information has on what people say is important to them; and (3) the effect of preference elicitation methods on what people say is important. A random sample of 201 Wisconsin state employees who participated in a health plan choice experiment during the 1995 open enrollment period. We designed a computer system to guide subjects through the review of information about health plan options. The system began by eliciting the stated preferences of the subjects before they viewed the information, at time 0. Subjects were given an opportunity to revise their preference structures first after viewing summary information about four health plans (time 1) and then after viewing more extensive, detailed information about the same options (time 2). At time 2, these individuals were also asked to rate the relative importance of a predefined list of health plan features presented to them. Data were collected on the number of attributes listed at each point in time and the importance weightings assigned to each attribute. In addition, each item on the attribute list was content analyzed. The provision of information changes the preference structures of individuals. Costs (price) and coverage dominated the attributes cited both before and after looking at health plan information. When presented with information on costs, quality, and how plans work, many of these relatively well educated consumers revised their preference structures; yet coverage and costs remained the primary cited attributes. Although efforts to provide health plan information should continue, decisions on the information to provide and on making it available are not enough. Individuals need help in understanding, processing, and using the information to construct their preferences and make better decisions.

Survey on Restoration of Endodontically Treated Anterior Teeth: A Questionnaire Based Study

PubMed Central

Ratnakar, P; Bhosgi, Rashmi; Metta, Kiran Kumar; Aggarwal, Kanika; Vinuta, S; Singh, Navneet

2014-01-01

Background: The aim of endodontic and restorative dentistry is the conservation of natural tooth structure. Endodontically treated tooth (ETT) undergoes loss of tooth structure and changes in physical characteristics. Therefore, proper selection of restoration for ETT is mandatory. The clinical approach of restoring ETT needs taking into considerations several issues. However, the best way to restore teeth after root canal treatment has long been and still a controversial subject to debate. Therefore, this study was carried out to detect the frequency of preferred methods of restoring ETT under different conditions. Materials and Methods: A questionnaire was framed and distributed among prosthodontists, endodontist and general practitioners of north India region to find out the frequency of best suitable material and method regarding restoration of ETT. 220 questionnaires were sent by electronic mail out of which 110 were received back. The questionnaire contained different methods of restoration of endodontically treated anterior teeth at different conditions (percentages) of remaining sound tooth structure. Respondents were asked to indicate their preferred method of restoration of those teeth. Results: Results showed that majority of respondents (51.82%) preferred to restore the tooth only with a tooth-color restorative material in condition A. In condition B, majority of respondents preferred to use tooth colored crown (44.55%) and prefabricated post and tooth colored restoration (24.5%). Whereas in condition C, most of the respondents preferred to use a cast post and core/crown (80.91%). Conclusion: From the findings of the present study, it can be concluded that the unrestored ETT is susceptible to fracture, which could lead to loss of tooth and that the maximum preservation of healthy tooth structure and use of restorative materials with mechanical properties similar to dental structure favor greater longevity of tooth restoration complex. PMID:25628482

Method of forming a leak proof plasma sprayed interconnection layer on an electrode of an electrochemical cell

DOEpatents

Kuo, Lewis J. H.; Vora, Shailesh D.

1995-01-01

A dense, substantially gas-tight, electrically conductive interconnection layer is formed on an electrode structure of an electrochemical cell by: (A) providing an electrode structure; (B) forming on a selected portion of the electrode surface, an interconnection layer having the general formula La.sub.1-x M.sub.x Cr.sub.1-y N.sub.y O.sub.3, where M is a dopant selected from the group of Ca, Sr, Ba, and mixtures thereof, and where N is a dopant selected from the group of Mg, Co, Ni, Al, and mixtures thereof, and where x and y are each independently about 0.075-0.25, by thermally spraying, preferably plasma arc spraying, a flux added interconnection spray powder, preferably agglomerated, the flux added powder comprising flux particles, preferably including dopant, preferably (CaO).sub.12. (Al.sub.2 O.sub.3).sub.7 flux particles including Ca and Al dopant, and LaCrO.sub.3 interconnection particles, preferably undoped LaCrO.sub.3, to form a dense and substantially gas-tight interconnection material bonded to the electrode structure by a single plasma spraying step; and, (C) heat treating the interconnection layer at from about 1200.degree. to 1350.degree. C. to further densify and heal the micro-cracks and macro-cracks of the thermally sprayed interconnection layer. The result is a substantially gas-tight, highly doped, electrically conductive interconnection material bonded to the electrode structure. The electrode structure can be an air electrode, and a solid electrolyte layer can be applied to the unselected portion of the air electrode, and further a fuel electrode can be applied to the solid electrolyte, to form an electrochemical cell for generation of electrical power.

Method of forming a leak proof plasma sprayed interconnection layer on an electrode of an electrochemical cell

DOEpatents

Kuo, L.J.H.; Vora, S.D.

1995-02-21

A dense, substantially gas-tight, electrically conductive interconnection layer is formed on an electrode structure of an electrochemical cell by: (A) providing an electrode structure; (B) forming on a selected portion of the electrode surface, an interconnection layer having the general formula La{sub 1{minus}x}M{sub x}Cr{sub 1{minus}y}N{sub y}O{sub 3}, where M is a dopant selected from the group of Ca, Sr, Ba, and mixtures thereof, and where N is a dopant selected from the group of Mg, Co, Ni, Al, and mixtures thereof, and where x and y are each independently about 0.075--0.25, by thermally spraying, preferably plasma arc spraying, a flux added interconnection spray powder, preferably agglomerated, the flux added powder comprising flux particles, preferably including dopant, preferably (CaO){sub 12}(Al{sub 2}O{sub 3}){sub 7} flux particles including Ca and Al dopant, and LaCrO{sub 3} interconnection particles, preferably undoped LaCrO{sub 3}, to form a dense and substantially gas-tight interconnection material bonded to the electrode structure by a single plasma spraying step; and (C) heat treating the interconnection layer at from about 1,200 to 1,350 C to further densify and heal the micro-cracks and macro-cracks of the thermally sprayed interconnection layer. The result is a substantially gas-tight, highly doped, electrically conductive interconnection material bonded to the electrode structure. The electrode structure can be an air electrode, and a solid electrolyte layer can be applied to the unselected portion of the air electrode, and further a fuel electrode can be applied to the solid electrolyte, to form an electrochemical cell for generation of electrical power. 4 figs.

First-principles study of the solid solution of hydrogen in lanthanum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schoellhammer, Gunther; Herzig, Peter; Wolf, Walter

2011-09-01

Results from first-principles investigations of the energetical, structural, electronic, and vibrational properties of model structures probing the metal-rich region of the lanthanum-hydrogen system, i.e., the region of the solid solution of hydrogen in lanthanum, are presented. We have studied the site preference and the ordering tendency of hydrogen atoms interstitially bonded in close-packed lanthanum. Spatially separated hydrogen atoms have turned out to exhibit an energetical preference for the occupation of octahedral interstitial sites at low temperature. Indications for a reversal of the site preference in favor of the occupation of tetrahedral interstitial sites at elevated temperature have been found. Linearmore » arrangements consisting of pairs of octahedrally and/or tetrahedrally coordinated hydrogen atoms collinearly bonded to a central lanthanum atom have turned out to be energetically favorable structure elements. Further stabilization is achieved if such hydrogen pairs are in turn linked together so that extended chains of La-H bonds are formed. Pair formation and chain linking counteract the energetical preference for octahedral coordination observed for separated hydrogen atoms.« less

From Death Metal to R&B? Consistency of Music Preferences among Dutch Adolescents and Young Adults

ERIC Educational Resources Information Center

Mulder, Juul; Ter Bogt, Tom F. M.; Raaijmakers, Quinten A. W.; Gabhainn, Saoirse Nic; Sikkema, Paul

2010-01-01

The structure of music preferences has been investigated extensively. However, development of music preferences in terms of consistency of music taste is as yet understudied. In this study, intra-individual consistency of music taste was assessed among Dutch adolescents and young adults over three points in time in a 21-month period. An…

Bioisostere Identification by Determining the Amino Acid Binding Preferences of Common Chemical Fragments.

PubMed

Sato, Tomohiro; Hashimoto, Noriaki; Honma, Teruki

2017-12-26

To assist in the structural optimization of hit/lead compounds during drug discovery, various computational approaches to identify potentially useful bioisosteric conversions have been reported. Here, the preference of chemical fragments to hydrogen bonds with specific amino acid residues was used to identify potential bioisosteric conversions. We first compiled a data set of chemical fragments frequently occurring in complex structures contained in the Protein Data Bank. We then used a computational approach to determine the amino acids to which these chemical fragments most frequently hydrogen bonded. The results of the frequency analysis were used to hierarchically cluster chemical fragments according to their amino acid preferences. The Euclid distance between amino acid preferences of chemical fragments for hydrogen bonding was then compared to MMP information in the ChEMBL database. To demonstrate the applicability of the approach for compound optimization, the similarity of amino acid preferences was used to identify known bioisosteric conversions of the epidermal growth factor receptor inhibitor gefitinib. The amino acid preference distance successfully detected bioisosteric fragments corresponding to the morpholine ring in gefitinib with a higher ROC score compared to those based on topological similarity of substituents and frequency of MMP in the ChEMBL database.

Focus Groups in Elderly Ophthalmologic Patients: Setting the Stage for Quantitative Preference Elicitation.

PubMed

Danner, Marion; Vennedey, Vera; Hiligsmann, Mickaël; Fauser, Sascha; Stock, Stephanie

2016-02-01

Patients suffering from age-related macular degeneration (AMD) are rarely actively involved in decision-making, despite facing preference-sensitive treatment decisions. This paper presents a qualitative study to prepare quantitative preference elicitation in AMD patients. The aims of this study were (1) to gain familiarity with and learn about the special requirements of the AMD patient population for quantitative data collection; and (2) to select/refine patient-relevant treatment attributes and levels, and gain insights into preference structures. Semi-structured focus group interviews were performed. An interview guide including preselected categories in the form of seven potentially patient-relevant treatment attributes was followed. To identify the most patient-relevant treatment attributes, a ranking exercise was performed. Deductive content analyses were done by two independent reviewers for each attribute to derive subcategories (potential levels of attributes) and depict preference trends. The focus group interviews included 21 patients. The interviews revealed that quantitative preference surveys in this population will have to be interviewer assisted to make the survey feasible for patients. The five most patient-relevant attributes were the effect on visual function [ranking score (RS): 139], injection frequency (RS: 101), approval status (RS: 83), side effects (RS: 79), and monitoring frequency (RS: 76). Attribute and level refinement was based on patients' statements. Preference trends and dependencies between attributes informed the quantitative instrument design. This study suggests that qualitative research is a very helpful step to prepare the design and administration of quantitative preference elicitation instruments. It especially facilitated familiarization with the target population and its preferences, and it supported attribute/level refinement.

The Structure of the Protonated Serine Octamer.

PubMed

Scutelnic, Valeriu; Perez, Marta A S; Marianski, Mateusz; Warnke, Stephan; Gregor, Aurelien; Rothlisberger, Ursula; Bowers, Michael T; Baldauf, Carsten; von Helden, Gert; Rizzo, Thomas R; Seo, Jongcheol

2018-06-20

The amino acid serine has long been known to form a protonated "magic-number" cluster containing eight monomer units that shows an unusually high abundance in mass spectra and has a remarkable homochiral preference. Despite many experimental and theoretical studies, there is no consensus on a Ser 8 H + structure that is in agreement with all experimental observations. Here, we present the structure of Ser 8 H + determined by a combination of infrared spectroscopy and ab initio molecular dynamics simulations. The three-dimensional structure that we determine is ∼25 kcal mol -1 more stable than the previous most stable published structure and explains both the homochiral preference and the experimentally observed facile replacement of two serine units.

Structural imbalance promotes behavior analogous to aesthetic preference in domestic chicks.

PubMed

Elliott, Mark A; Salva, Orsola Rosa; Mulcahy, Paul; Regolin, Lucia

2012-01-01

Visual images may be judged 'aesthetic' when their positioning appears imbalanced. An apparent imbalance may signify an as yet incomplete action or event requiring more detailed processing. As such it may refer to phylogenetically ancient stimulus-response mechanisms such as those mediating attentional deployment. We studied preferences for structural balance or imbalance in week-old domestic chicks (Gallus gallus), using a conditioning procedure to reinforce pecking at either "aligned" (balanced) or "misaligned" (imbalanced) training stimuli. A testing phase with novel balanced and imbalanced stimuli established whether chicks would retain their conditioned behavior or revert to chance responding. Whereas those trained on aligned stimuli were equally likely to choose aligned or misaligned stimuli, chicks trained on misaligned stimuli maintained the trained preference. Our results are consistent with the idea that the coding of structural imbalance is primary and even overrides classical conditioning. Generalized to the humans, these results suggest aesthetic judgments based upon structural imbalance may be based on evolutionarily ancient mechanisms, which are shared by different vertebrate species.

The playmate and play style preferences structured interview: a comparison of children with gender identity disorder and controls.

PubMed

Fridell, Sari R; Owen-Anderson, Allison; Johnson, Laurel L; Bradley, Susan J; Zucker, Kenneth J

2006-12-01

The present study compared the sex-typed preferences for playmates and play styles in children referred for concerns about their gender identity development (199 boys, 43 girls) with that of controls (96 boys, 38 girls). Each child was administered the Playmate and Play Style Preferences Structured Interview (PPPSI) developed by Alexander and Hines (Alexander, G. M., & Hines, M. (1994). Child Development, 65, 869-879). In the two single dimension conditions (playmates and play styles), the controls significantly preferred same-sex playmates and same-sex play styles whereas the gender-referred children significantly preferred cross-sex playmates and cross-sex play styles. Effect sizes ranged from 1.56-2.78. In the conflict condition (which required a choice between same-sex playmates and cross-sex play styles vs. cross-sex playmates and same-sex play styles), there was a general indication of a hierarchical preference for the preferred play style in the single dimension condition as opposed to the preferred playmate except for the gender-referred boys, who showed an inverted pattern. For the gender-referred group, the PPPSI data were significantly correlated with other measures of sex-typed behavior, providing evidence of predictive validity. The PPPSI also discriminated between probands threshold and subthreshold for the diagnosis of gender identity disorder. The results were discussed in relation to both basic and applied issues in the assessment of sex-typed behavior in children.

Conducting preference assessments for youth with disorders of consciousness during rehabilitation.

PubMed

Amari, Adrianna; Suskauer, Stacy J; Paasch, Valerie; Grodin, Lauren K; Slomine, Beth S

2017-08-01

Care and rehabilitation for individuals with disorders of consciousness (DOC) can be challenging; the use of observational data collection, individualized treatment programs, and incorporation of preferred, personally meaningful and salient items may be helpful in addressing such challenges during assessment and intervention. In this article, we extend the predominantly adult literature on use of salient items to promote differential responding by describing our methodology to identify preferred items across sensory domains for application during inpatient rehabilitation with children with DOC. Details on the indirect and direct preference assessment procedures rooted in applied behavior analysis that we have tailored for this population are provided. We describe steps of the procedures, including structured caregiver interview, staff survey, item inclusion, in vivo single-item stimulus preference assessment, and treatment. Clinical case examples further illustrate implementation of our methodology, observed response topographies, individually identified preferred items, and their application for 3 children in a minimally conscious state. In addition, we introduce a new structured caregiver interview, the Preference Assessment for Youth with Disorders of Consciousness (PAYDOC), modeled on the Reinforcer Assessment for Individuals with Severe Disabilities (RAISD; Fisher, Piazza, Bowman, & Amari, 1996) and modified to be appropriate for future use as a clinical tool to enhance assessment of preferences with this pediatric brain injury population. This methodology can be used to identify highly idiosyncratic stimuli that can be incorporated in multiple ways throughout rehabilitation to optimize care for youth with DOC. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Humans Rapidly Learn Grammatical Structure in a New Musical Scale

PubMed Central

Loui, Psyche; Wessel, David L.; Hudson Kam, Carla L.

2010-01-01

Knowledge of musical rules and structures has been reliably demonstrated in humans of different ages, cultures, and levels of music training, and has been linked to our musical preferences. However, how humans acquire knowledge of and develop preferences for music remains unknown. The present study shows that humans rapidly develop knowledge and preferences when given limited exposure to a new musical system. Using a non-traditional, unfamiliar musical scale (Bohlen-Pierce scale), we created finite-state musical grammars from which we composed sets of melodies. After 25–30 min of passive exposure to the melodies, participants showed extensive learning as characterized by recognition, generalization, and sensitivity to the event frequencies in their given grammar, as well as increased preference for repeated melodies in the new musical system. Results provide evidence that a domain-general statistical learning mechanism may account for much of the human appreciation for music. PMID:20740059

Humans Rapidly Learn Grammatical Structure in a New Musical Scale.

PubMed

Loui, Psyche; Wessel, David L; Hudson Kam, Carla L

2010-06-01

Knowledge of musical rules and structures has been reliably demonstrated in humans of different ages, cultures, and levels of music training, and has been linked to our musical preferences. However, how humans acquire knowledge of and develop preferences for music remains unknown. The present study shows that humans rapidly develop knowledge and preferences when given limited exposure to a new musical system. Using a non-traditional, unfamiliar musical scale (Bohlen-Pierce scale), we created finite-state musical grammars from which we composed sets of melodies. After 25-30 min of passive exposure to the melodies, participants showed extensive learning as characterized by recognition, generalization, and sensitivity to the event frequencies in their given grammar, as well as increased preference for repeated melodies in the new musical system. Results provide evidence that a domain-general statistical learning mechanism may account for much of the human appreciation for music.

Preferences for paper bedding material of the laboratory mice.

PubMed

Ago, Akio; Gonda, Tatuo; Takechi, Mayumi; Takeuchi, Takashi; Kawakami, Kohei

2002-04-01

In order to identify indicators of the preferences for bedding materials, the paper bedding material preferences of laboratory mice were investigated in the present study. Four cages, each containing a different structure of paper bedding material were connected to allow free access to each cage. The preferences for paper bedding materials of laboratory mice were judged by the differences in the length of stay and sleep in each cage. The mice preferred the bedding material that allowed them to easily hide and build nests and was soft. We conclude that the comfort and well-being of laboratory mice can be increased through the appropriate selection of bedding material.

Mount St. Helens, Washington Feasibility Report & Environmental Impact Statement. Volume 1: Main Report

DTIC Science & Technology

1984-12-01

Base Condition WITH-PROJECT CONDITION Single Retention Structure Identification of NED Plan Benefits - NED Plan SENSITIVITY OF NED PLAN TO...Downstream Actions COSTS OF THE PREFERRED PLAN BENEFITS OF THE PREFERRED PLAN Economic and Social Effects Prevention of Erosion Maintenance of...continued) TABLES Residual Damages Summary of Costs Preferred Alternative Sediment MOvement Net Average Annual NED Benefits Total Flood Damages Average

An Exploratory Study of the Language-Learning Style Preferences of Iranian EFL High School Students

ERIC Educational Resources Information Center

Ramezani, Afsaneh Effatdokht; Dehgahi, Meysam; Hashemi, Hanie

2015-01-01

This study explored the learning style preferences of 40 Iranian students at Marefat Iranian high school in Kuala Lumpur of which, 20 are females and 20 are males. To this end, this study used structured interview to elicit in-depth information from the students. The results of the study showed that learning style preferences of Iranian students…

Structure of Corrective Feedback for Selection of Ineffective Vegetable Parenting Practices for Use in a Simulation Videogame

PubMed Central

Beltran, Alicia; Chen, Tzu-An; O'Connor, Teresia; Hughes, Sheryl; Buday, Richard; Baranowski, Janice

2013-01-01

Abstract A serious videogame is being developed to train parents of preschool children in selecting and using parenting practices that are likely to encourage their child to eat more vegetables. The structure of feedback to the parents on their selection may influence what they learn from the game. Feedback Intervention Theory provides some guidance on the design of such messages. The structure of preferred performance feedback statements has not been investigated within serious videogames. Two feedback formats were tested for a player's preferences within the context of this videogame. Based on Feedback Intervention Theory, which proposes that threat to self-concept impairs feedback response, three-statement (a nonaffirming comment sandwiched between two affirming comments, called “Oreo” feedback, which should minimize threat to self-concept) and two-statement (a nonaffirming comment followed by an affirming comment) performance feedbacks were tailored to respondents. Tailoring was based on participants' report of frequency of use of effective and ineffective vegetable parenting practices and the reasons for use of the ineffective practices. Participants selected their preference between the two forms of feedback for each of eight ineffective vegetable parenting practices. In general, mothers (n=81) (no male respondents) slightly preferred the “Oreo” feedback, but the pattern of preferences varied by demographic characteristics. Stronger relationships by income suggest the feedback structure should be tailored to family income. Future research with larger and more diverse samples needs to test whether perceived threat to self-concept mediates the response to feedback and otherwise verify these findings. PMID:24761320

Structure of Corrective Feedback for Selection of Ineffective Vegetable Parenting Practices for Use in a Simulation Videogame.

PubMed

Baranowski, Tom; Beltran, Alicia; Chen, Tzu-An; O'Connor, Teresia; Hughes, Sheryl; Buday, Richard; Baranowski, Janice

2013-02-01

A serious videogame is being developed to train parents of preschool children in selecting and using parenting practices that are likely to encourage their child to eat more vegetables. The structure of feedback to the parents on their selection may influence what they learn from the game. Feedback Intervention Theory provides some guidance on the design of such messages. The structure of preferred performance feedback statements has not been investigated within serious videogames. Two feedback formats were tested for a player's preferences within the context of this videogame. Based on Feedback Intervention Theory, which proposes that threat to self-concept impairs feedback response, three-statement (a nonaffirming comment sandwiched between two affirming comments, called "Oreo" feedback, which should minimize threat to self-concept) and two-statement (a nonaffirming comment followed by an affirming comment) performance feedbacks were tailored to respondents. Tailoring was based on participants' report of frequency of use of effective and ineffective vegetable parenting practices and the reasons for use of the ineffective practices. Participants selected their preference between the two forms of feedback for each of eight ineffective vegetable parenting practices. In general, mothers ( n =81) (no male respondents) slightly preferred the "Oreo" feedback, but the pattern of preferences varied by demographic characteristics. Stronger relationships by income suggest the feedback structure should be tailored to family income. Future research with larger and more diverse samples needs to test whether perceived threat to self-concept mediates the response to feedback and otherwise verify these findings.

Preferred Compression Speed for Speech and Music and Its Relationship to Sensitivity to Temporal Fine Structure.

PubMed

Moore, Brian C J; Sęk, Aleksander

2016-09-07

Multichannel amplitude compression is widely used in hearing aids. The preferred compression speed varies across individuals. Moore (2008) suggested that reduced sensitivity to temporal fine structure (TFS) may be associated with preference for slow compression. This idea was tested using a simulated hearing aid. It was also assessed whether preferences for compression speed depend on the type of stimulus: speech or music. Twenty-two hearing-impaired subjects were tested, and the stimulated hearing aid was fitted individually using the CAM2A method. On each trial, a given segment of speech or music was presented twice. One segment was processed with fast compression and the other with slow compression, and the order was balanced across trials. The subject indicated which segment was preferred and by how much. On average, slow compression was preferred over fast compression, more so for music, but there were distinct individual differences, which were highly correlated for speech and music. Sensitivity to TFS was assessed using the difference limen for frequency at 2000 Hz and by two measures of sensitivity to interaural phase at low frequencies. The results for the difference limens for frequency, but not the measures of sensitivity to interaural phase, supported the suggestion that preference for compression speed is affected by sensitivity to TFS. © The Author(s) 2016.

Locality and Word Order in Active Dependency Formation in Bangla

PubMed Central

Chacón, Dustin A.; Imtiaz, Mashrur; Dasgupta, Shirsho; Murshed, Sikder M.; Dan, Mina; Phillips, Colin

2016-01-01

Research on filler-gap dependencies has revealed that there are constraints on possible gap sites, and that real-time sentence processing is sensitive to these constraints. This work has shown that comprehenders have preferences for potential gap sites, and immediately detect when these preferences are not met. However, neither the mechanisms that select preferred gap sites nor the mechanisms used to detect whether these preferences are met are well-understood. In this paper, we report on three experiments in Bangla, a language in which gaps may occur in either a pre-verbal embedded clause or a post-verbal embedded clause. This word order variation allows us to manipulate whether the first gap linearly available is contained in the same clause as the filler, which allows us to dissociate structural locality from linear locality. In Experiment 1, an untimed ambiguity resolution task, we found a global bias to resolve a filler-gap dependency with the first gap linearly available, regardless of structural hierarchy. In Experiments 2 and 3, which use the filled-gap paradigm, we found sensitivity to disruption only when the blocked gap site is both structurally and linearly local, i.e., the filler and the gap site are contained in the same clause. This suggests that comprehenders may not show sensitivity to the disruption of all preferred gap resolutions. PMID:27610090

Structure-based conformational preferences of amino acids

PubMed Central

Koehl, Patrice; Levitt, Michael

1999-01-01

Proteins can be very tolerant to amino acid substitution, even within their core. Understanding the factors responsible for this behavior is of critical importance for protein engineering and design. Mutations in proteins have been quantified in terms of the changes in stability they induce. For example, guest residues in specific secondary structures have been used as probes of conformational preferences of amino acids, yielding propensity scales. Predicting these amino acid propensities would be a good test of any new potential energy functions used to mimic protein stability. We have recently developed a protein design procedure that optimizes whole sequences for a given target conformation based on the knowledge of the template backbone and on a semiempirical potential energy function. This energy function is purely physical, including steric interactions based on a Lennard-Jones potential, electrostatics based on a Coulomb potential, and hydrophobicity in the form of an environment free energy based on accessible surface area and interatomic contact areas. Sequences designed by this procedure for 10 different proteins were analyzed to extract conformational preferences for amino acids. The resulting structure-based propensity scales show significant agreements with experimental propensity scale values, both for α-helices and β-sheets. These results indicate that amino acid conformational preferences are a natural consequence of the potential energy we use. This confirms the accuracy of our potential and indicates that such preferences should not be added as a design criterion. PMID:10535955

Neurobiological Substrates of Communicator Style.

ERIC Educational Resources Information Center

Bodary, David L.; Miller, Larry D.

2000-01-01

Investigates differences in brain structures, as reflected in hemispheric laterality, and sex on communicator style preferences. Combines handedness, familial sinistrality, and related correlates as a predictor of standard or anomalous hemispheric dominance. Finds data consistent with hypothesis that communication preferences have a…

Method of depositing multi-layer carbon-based coatings for field emission

DOEpatents

Sullivan, John P.; Friedmann, Thomas A.

1999-01-01

A novel field emitter device for cold cathode field emission applications, comprising a multi-layer resistive carbon film. The multi-layered film of the present invention is comprised of at least two layers of a resistive carbon material, preferably amorphous-tetrahedrally coordinated carbon, such that the resistivities of adjacent layers differ. For electron emission from the surface, the preferred structure comprises a top layer having a lower resistivity than the bottom layer. For edge emitting structures, the preferred structure of the film comprises a plurality of carbon layers, wherein adjacent layers have different resistivities. Through selection of deposition conditions, including the energy of the depositing carbon species, the presence or absence of certain elements such as H, N, inert gases or boron, carbon layers having desired resistivities can be produced. Field emitters made according the present invention display improved electron emission characteristics in comparison to conventional field emitter materials.

Method of depositing multi-layer carbon-based coatings for field emission

DOEpatents

Sullivan, J.P.; Friedmann, T.A.

1999-08-10

A novel field emitter device is disclosed for cold cathode field emission applications, comprising a multi-layer resistive carbon film. The multi-layered film of the present invention is comprised of at least two layers of a resistive carbon material, preferably amorphous-tetrahedrally coordinated carbon, such that the resistivities of adjacent layers differ. For electron emission from the surface, the preferred structure comprises a top layer having a lower resistivity than the bottom layer. For edge emitting structures, the preferred structure of the film comprises a plurality of carbon layers, wherein adjacent layers have different resistivities. Through selection of deposition conditions, including the energy of the depositing carbon species, the presence or absence of certain elements such as H, N, inert gases or boron, carbon layers having desired resistivities can be produced. Field emitters made according the present invention display improved electron emission characteristics in comparison to conventional field emitter materials. 8 figs.

Cross-validation of the Student Perceptions of Team-Based Learning Scale in the United States.

PubMed

Lein, Donald H; Lowman, John D; Eidson, Christopher A; Yuen, Hon K

2017-01-01

The purpose of this study was to cross-validate the factor structure of the previously developed Student Perceptions of Team-Based Learning (TBL) Scale among students in an entry-level doctor of physical therapy (DPT) program in the United States. Toward the end of the semester in 2 patient/client management courses taught using TBL, 115 DPT students completed the Student Perceptions of TBL Scale, with a response rate of 87%. Principal component analysis (PCA) and confirmatory factor analysis (CFA) were conducted to replicate and confirm the underlying factor structure of the scale. Based on the PCA for the validation sample, the original 2-factor structure (preference for TBL and preference for teamwork) of the Student Perceptions of TBL Scale was replicated. The overall goodness-of-fit indices from the CFA suggested that the original 2-factor structure for the 15 items of the scale demonstrated a good model fit (comparative fit index, 0.95; non-normed fit index/Tucker-Lewis index, 0.93; root mean square error of approximation, 0.06; and standardized root mean square residual, 0.07). The 2 factors demonstrated high internal consistency (alpha= 0.83 and 0.88, respectively). DPT students taught using TBL viewed the factor of preference for teamwork more favorably than preference for TBL. Our findings provide evidence supporting the replicability of the internal structure of the Student Perceptions of TBL Scale when assessing perceptions of TBL among DPT students in patient/client management courses.

Hypersexuality or altered sexual preference following brain injury.

PubMed Central

Miller, B L; Cummings, J L; McIntyre, H; Ebers, G; Grode, M

1986-01-01

Eight patients are described in whom either hypersexuality (four cases) or change in sexual preference (four cases) occurred following brain injury. In this series disinhibition of sexual activity and hypersexuality followed medial basal-frontal or diencephalic injury. This contrasted with the patients demonstrating altered sexual preference whose injuries involved limbic system structures. In some patients altered sexual behaviour may be the presenting or dominant feature of brain injury. Images PMID:3746322

Do Italian women prefer cesarean section? Results from a survey on mode of delivery preferences

PubMed Central

2013-01-01

Background About 20 million cesareans occur each year in the world and rates have steadily increased in almost all middle- and high-income countries over the last decades. Maternal request is often argued as one of the key forces driving this increase. Italy has the highest cesarean rate of Europe, yet there are no national surveys on the views of Italian women about their preferences on route of delivery. This study aimed to assess Italian women´s preference for mode of delivery, as well as reasons and factors associated with this preference, in a nationally representative sample of women. Methods This cross sectional survey was conducted between December 2010-March 2011. An anonymous structured questionnaire asked participants what was their preferred mode of delivery and explored the reasons for this preference by assessing their agreement to a series of statements. Participants were also asked to what extent their preference was influenced by a series of possible sources. The 1st phase of the study was carried out among readers of a popular Italian women´s magazine (Io Donna). In a 2nd phase, the study was complemented by a structured telephone interview. Results A total of 1000 Italian women participated in the survey and 80% declared they would prefer to deliver vaginally if they could opt. The preference for vaginal delivery was significantly higher among older (84.7%), more educated (87.6%), multiparous women (82.3%) and especially among those without any previous cesareans (94.2%). The main reasons for preferring a vaginal delivery were not wanting to be separated from the baby during the first hours of life, a shorter hospital stay and a faster postpartum recovery. The main reasons for preferring a cesarean were fear of pain, convenience to schedule the delivery and because it was perceived as being less traumatic for the baby. The source which most influenced the preference of these Italian women was their obstetrician, followed by friends or relatives. Conclusion Four in five Italian women would prefer to deliver vaginally if they could opt. Factors associated with a higher preference for cesarean delivery were youth, nulliparity, lower education and a previous cesarean. PMID:23530472

The effect of virtual cross linking on the oxidative stability and lipid uptake of aliphatic poly(urethane urea).

PubMed

Thomas, Vinoy; Jayabalan, Muthu

2002-01-01

In vitro oxidative degradation and lipid sorption of aliphatic, low elastic modulus and virtually cross-linked poly(urethane urea)s based on 4,4' methylene bis(cyclohexyl isocyanate), hydroxy terminated poly butadiene and hexamethylene diamine were evaluated. The aged samples revealed no weight loss in the oxidation medium. The IR spectral analyses revealed the stability of unsaturated double bonds at 964 cm(-1) (characteristic for polybutadiene soft segment) with no change in peak intensity. The poly(tetramethylene glycol) (PTMG)-added poly(ether urethane urea) polymer also revealed no disappearance of IR peaks for ether and unsaturated double bonds in samples aged in vitro oxidation medium. All the polymers have shown increase in weight due to lipid up take in lipid-rich medium (palm oil) but it was rather low in Dulbecco's modified eagle medium (DMEM) cholesterol. The slight change in mechanical properties of the present polymers in oxidation and DMEM is due to the rearrangement of molecular structure with virtual cross links of hydrogen bonding (physical cross linking) without degradation and plasticization effect of lipid. The influence of these media on the rearrangement of virtual cross links has been observed. Higher the virtual cross-link density, lesser is the loss of tensile properties of poly(urethane urea)s in the oxidation medium and vice versa. On the other hand, higher the virtual cross-link density of poly(urethane urea), higher is the loss of ultimate tensile strength and stress at 100% strain and vice versa in DMEM medium.

Composite propellant combustion with low aluminum agglomeration

NASA Astrophysics Data System (ADS)

Mullen, Jessica Christine

Aluminum behavior---accumulation, agglomeration and ignition---is studied in a unique, wide-distribution, ammonium perchlorate/hydroxyl-terminated polybutadiene (AP/HTPB) propellant formulation that results in low Al agglomeration, even at low pressures (1--30 atm). Variations in formulation---such as fine-AP/binder ratio, Al particle size, Al loading, coarse-AP size---are also examined. A fuel-rich, oxygenated binder matrix highly loaded with fine (2-mum) AP (FAP) at 75/25:FAP/binder (by mass) is found to have premixed flame conditions that produce minimal agglomeration (without ignition) of 15-mum Al. Coarse AP (CAP) is added to the system in the form of either particles (200 or 400 mum) or pressed-AP laminates (simulated CAP). In the 2-D laminate system the CAP/oxyfuel-matrix flame structure is seen to be similar to that previously described for non-aluminized laminates with split (diffusion) and merged (partially-premixed) flame regimes, depending on pressure and fuel-matrix thickness. Both laminate and particulate systems show that with CAP present, Al can agglomerate more extensively on CAP via lateral surface migration from fuel matrix to the CAP region. The particulate CAP system also shows that Al can accumulate/agglomerate via settling on CAP from above (in the direction of burning). Both systems, but more clearly the 2-D laminates, show that with CAP present, Al is ignited by the outer CAP/fuel-matrix canopy flames. Thus, a propellant formulation is proposed for reducing overall Al agglomeration through intrinsically reduced agglomeration in the fuel-matrix and a reduced number of CAP-particle agglomerates via higher FAP/CAP ratio.

Stakeholders' perspectives on quality indicators for diabetes care: a qualitative study.

PubMed

Markhorst, Joekie; Martirosyan, Liana; Calsbeek, Hiske; Braspenning, Jozé

2012-01-01

Transparency in diabetes care requires quality indicators that are of interest to stakeholders in order to optimise their usage. Indicator development is often focused on consensus, and little is known about stakeholders' preferences for information on quality. To explore the preferences of consumers, providers, purchasers and policy makers for different quality domains and indicators in relation to the intended use of quality indicators. Between June and December 2009, 14 semi-structured interviews were held with stakeholders who have a decisive vote in the selection of the national indicator set for diabetes care in the Netherlands. The following subjects were explored: (1) the aims of using information on quality; (2) the interpretation of and preferences for the quality domains of safety, timeliness, effectiveness and patient-centredness in relation to the user aims; and (3) the preferences for structure, process or outcome indicators. Content analysis was used to analyse qualitative data. Stakeholders had similar and different aims according to their roles. The interpretations of quality domains varied greatly between the stakeholders. Besides differences in interpretation, their preferences were similar. Most stakeholders prioritised patient-centredness above the other domains of quality, ranked in order of priority as safety, effectiveness and timeliness, whereas purchasers also prioritised efficiency. All stakeholders preferred to use process indicators or a mix of process and outcome indicators. The preferences of the stakeholders for quality indicators seem to be neither well-refined nor congruent. The implementation of an indicator set can probably be improved if the stakeholders' definitions and preferences for quality domains become more explicit during the selection process for indicators.

Developing the Stroke Exercise Preference Inventory (SEPI)

PubMed Central

Bonner, Nicholas S.; O’Halloran, Paul D.; Bernhardt, Julie; Cumming, Toby B.

2016-01-01

Background Physical inactivity is highly prevalent after stroke, increasing the risk of poor health outcomes including recurrent stroke. Tailoring of exercise programs to individual preferences can improve adherence, but no tools exist for this purpose in stroke. Methods We identified potential questionnaire items for establishing exercise preferences via: (i) our preliminary Exercise Preference Questionnaire in stroke, (ii) similar tools used in other conditions, and (iii) expert panel consultations. The resulting 35-item questionnaire (SEPI-35) was administered to stroke survivors, along with measures of disability, depression, anxiety, fatigue and self-reported physical activity. Exploratory factor analysis was used to identify a factor structure in exercise preferences, providing a framework for item reduction. Associations between exercise preferences and personal characteristics were analysed using multivariable regression. Results A group of 134 community-dwelling stroke survivors (mean age 64.0, SD 13.3) participated. Analysis of the SEPI-35 identified 7 exercise preference factors (Supervision-support, Confidence-challenge, Health-wellbeing, Exercise context, Home-alone, Similar others, Music-TV). Item reduction processes yielded a 13-item version (SEPI-13); in analysis of this version, the original factor structure was maintained. Lower scores on Confidence-challenge were significantly associated with disability (p = 0.002), depression (p = 0.001) and fatigue (p = 0.001). Self-reported barriers to exercise were particularly prevalent in those experiencing fatigue and anxiety. Conclusions The SEPI-13 is a brief instrument that allows assessment of exercise preferences and barriers in the stroke population. This new tool can be employed by health professionals to inform the development of individually tailored exercise interventions. PMID:27711242

Women's preference for traditional birth attendants and modern health care practitioners in Akpabuyo community of Cross River State, Nigeria.

PubMed

Akpabio, Idongesit I; Edet, Olaide B; Etifit, Rita E; Robinson-Bassey, Grace C

2014-01-01

The proportion of women who patronized traditional birth attendants (TBAs) or modern health care practitioners (MHCPs) was compared, including reasons for their choices. A comparative design was adopted to study 300 respondents selected through a multistage systematic random sampling technique. The instrument for data collection was a validated 21-item structured questionnaire. We observed that 75 (25%) patronized and 80 (27%) preferred TBAs, and 206 (69%) patronized and 220 (75%) preferred MHCPs, while 19 (6%) patronized both. The view that TBAs prayed before conducting deliveries was supported by a majority 75 (94%) of the respondents who preferred them. Factors associated with preference for TBAs should be addressed.

Understanding health care communication preferences of veteran primary care users.

PubMed

LaVela, Sherri L; Schectman, Gordon; Gering, Jeffrey; Locatelli, Sara M; Gawron, Andrew; Weaver, Frances M

2012-09-01

To assess veterans' health communication preferences (in-person, telephone, or electronic) for primary care needs and the impact of computer use on preferences. Structured patient interviews (n=448). Bivariate analyses examined preferences for primary care by 'infrequent' vs. 'regular' computer users. Only 54% were regular computer users, nearly all of whom had ever used the internet. 'Telephone' was preferred for 6 of 10 reasons (general medical questions, medication questions and refills, preventive care reminders, scheduling, and test results); although telephone was preferred by markedly fewer regular computer users. 'In-person' was preferred for new/ongoing conditions/symptoms, treatment instructions, and next care steps; these preferences were unaffected by computer use frequency. Among regular computer users, 1/3 preferred 'electronic' for preventive reminders (37%), test results (34%), and refills (32%). For most primary care needs, telephone communication was preferred, although by a greater proportion of infrequent vs. regular computer users. In-person communication was preferred for reasons that may require an exam or visual instructions. About 1/3 of regular computer users prefer electronic communication for routine needs, e.g., preventive reminders, test results, and refills. These findings can be used to plan patient-centered care that is aligned with veterans' preferred health communication methods. Published by Elsevier Ireland Ltd.

Thermodynamic scaling of α-relaxation time and viscosity stems from the Johari-Goldstein β-relaxation or the primitive relaxation of the coupling model.

PubMed

Ngai, K L; Habasaki, J; Prevosto, D; Capaccioli, S; Paluch, Marian

2012-07-21

By now it is well established that the structural α-relaxation time, τ(α), of non-associated small molecular and polymeric glass-formers obey thermodynamic scaling. In other words, τ(α) is a function Φ of the product variable, ρ(γ)/T, where ρ is the density and T the temperature. The constant γ as well as the function, τ(α) = Φ(ρ(γ)/T), is material dependent. Actually this dependence of τ(α) on ρ(γ)/T originates from the dependence on the same product variable of the Johari-Goldstein β-relaxation time, τ(β), or the primitive relaxation time, τ(0), of the coupling model. To support this assertion, we give evidences from various sources itemized as follows. (1) The invariance of the relation between τ(α) and τ(β) or τ(0) to widely different combinations of pressure and temperature. (2) Experimental dielectric and viscosity data of glass-forming van der Waals liquids and polymer. (3) Molecular dynamics simulations of binary Lennard-Jones (LJ) models, the Lewis-Wahnström model of ortho-terphenyl, 1,4 polybutadiene, a room temperature ionic liquid, 1-ethyl-3-methylimidazolium nitrate, and a molten salt 2Ca(NO(3))(2)·3KNO(3) (CKN). (4) Both diffusivity and structural relaxation time, as well as the breakdown of Stokes-Einstein relation in CKN obey thermodynamic scaling by ρ(γ)/T with the same γ. (5) In polymers, the chain normal mode relaxation time, τ(N), is another function of ρ(γ)/T with the same γ as segmental relaxation time τ(α). (6) While the data of τ(α) from simulations for the full LJ binary mixture obey very well the thermodynamic scaling, it is strongly violated when the LJ interaction potential is truncated beyond typical inter-particle distance, although in both cases the repulsive pair potentials coincide for some distances.

A neural circuit encoding sexual preference in humans

PubMed Central

Poeppl, Timm B.; Langguth, Berthold; Rupprecht, Rainer; Laird, Angela R; Eickhoff, Simon B.

2016-01-01

Sexual preference determines mate choice for reproduction and hence guarantees conservation of species in mammals. Despite this fundamental role in human behavior, current knowledge on its target-specific neurofunctional substrate is based on lesion studies and therefore limited. We used meta-analytic remodeling of neuroimaging data from 364 human subjects with diverse sexual interests during sexual stimulation to quantify neural regions associated with sexual preference manipulations. We found that sexual preference is encoded by four phylogenetically old, subcortical brain structures. More specifically, sexual preference is controlled by the anterior and preoptic area of the hypothalamus, the anterior and mediodorsal thalamus, the septal area, and the perirhinal parahippocampus including the dentate gyrus. In contrast, sexual non-preference is regulated by the substantia innominata. We anticipate the identification of a core neural circuit for sexual preferences to be a starting point for further sophisticated investigations into the neural principles of sexual behavior and particularly of its aberrations. PMID:27339689

Biochemical and Structural Insights into the Preference of Nairoviral DeISGylases for Interferon-Stimulated Gene Product 15 Originating from Certain Species

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deaton, M. K.; Dzimianski, J. V.; Daczkowski, C. M.

ABSTRACT The regulation of the interferon type I (IFN-I) response has been shown to rely on posttranslational modification by ubiquitin (Ub) and Ub-like interferon-stimulated gene product 15 (ISG15) to stabilize, or activate, a variety of IFN-I signaling and downstream effector proteins. Unlike Ub, which is almost perfectly conserved among eukaryotes, ISG15 is highly divergent, even among mammals. Since zoonotic viruses rely on viral proteins to recognize, or cleave, ISG15 conjugates in order to evade, or suppress, innate immunity, the impact of ISG15 biodiversity on deISGylating proteases of the ovarian tumor family (vOTU) from nairoviruses was evaluated. The enzymatic activities ofmore » vOTUs originating from the Crimean-Congo hemorrhagic fever virus, Erve virus, and Nairobi sheep disease virus were tested against ISG15s from humans, mice, shrews, sheep, bats, and camels, which are mammalian species known to be infected by nairoviruses. This along with investigation of binding by isothermal titration calorimetry illustrated significant differences in the abilities of nairovirus deISGylases to accommodate certain species of ISG15. To investigate the molecular underpinnings of species preferences of these vOTUs, a structure was determined to 2.5 Å for a complex of Erve virus vOTU protease and a mouse ISG15 domain. This structure revealed the molecular basis of Erve virus vOTU's preference for ISG15 over Ub and the first structural insight into a nonhuman ISG15. This structure also revealed key interactions, or lack thereof, surrounding three amino acids that may drive a viral deISgylase to prefer an ISG15 from one species over that of another. IMPORTANCEViral ovarian tumor domain proteases (vOTUs) are one of the two principal classes of viral proteases observed to reverse posttranslational modification of host proteins by ubiquitin and interferon-stimulated gene product 15 (ISG15), subsequently facilitating downregulation of IFN-I signaling pathways. Unlike the case with ubiquitin, the amino acid sequences of ISG15s from various species are notably divergent. We illustrate that vOTUs have clear preferences for ISG15s from certain species. In addition, these observations are related to the molecular insights acquired via the first X-ray structure of the vOTU from the Erve nairovirus in complex with the first structurally resolved nonhuman ISG15. This information implicates certain amino acids that drive the preference of vOTUs for ISG15s from certain species.« less

Malonate-bound structure of the glycerophosphodiesterase from Enterobacter aerogenes (GpdQ) and characterization of the native Fe[superscript 2+] metal-ion preference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, Colin J.; Hadler, Kieran S.; Carr, Paul D.

2011-09-28

The structure of a malonate-bound form of the glycerophosphodiesterase from Enterobacter aerogenes, GpdQ, has been refined at a resolution of 2.2 {angstrom} to a final R factor of 17.1%. The structure was originally solved to 2.9 {angstrom} resolution using SAD phases from Zn{sup 2+} metal ions introduced into the active site of the apoenzyme [Jackson et al. (2007), J. Mol. Biol. 367, 1047-1062]. However, the 2.9 {angstrom} resolution was insufficient to discern significant details of the architecture of the binuclear metal centre that constitutes the active site. Furthermore, kinetic analysis revealed that the enzyme lost a significant amount of activitymore » in the presence of Zn2+, suggesting that it is unlikely to be a catalytically relevant metal ion. In this communication, a higher resolution structure of GpdQ is presented in which malonate is visibly coordinated in the active site and analysis of the native metal-ion preference is presented using atomic absorption spectroscopy and anomalous scattering. Catalytic implications of the structure and its Fe{sup 2+} metal-ion preference are discussed.« less

Malonate-bound structure of the glycerophosphodiesterase from Enterobacter aerogenes (GpdQ) and characterization of the native Fe[supscript 2+] metal-ion preference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, Colin J.; Hadler, Kieran S.; Carr, Paul D.

2010-09-20

The structure of a malonate-bound form of the glycerophosphodiesterase from Enterobacter aerogenes, GpdQ, has been refined at a resolution of 2.2 {angstrom} to a final R factor of 17.1%. The structure was originally solved to 2.9 {angstrom} resolution using SAD phases from Zn{sup 2+} metal ions introduced into the active site of the apoenzyme [Jackson et al. (2007), J. Mol. Biol. 367, 1047-1062]. However, the 2.9 {angstrom} resolution was insufficient to discern significant details of the architecture of the binuclear metal centre that constitutes the active site. Furthermore, kinetic analysis revealed that the enzyme lost a significant amount of activitymore » in the presence of Zn{sup 2+}, suggesting that it is unlikely to be a catalytically relevant metal ion. In this communication, a higher resolution structure of GpdQ is presented in which malonate is visibly coordinated in the active site and analysis of the native metal-ion preference is presented using atomic absorption spectroscopy and anomalous scattering. Catalytic implications of the structure and its Fe{sup 2+} metal-ion preference are discussed.« less

Infant Hand Preference and the Development of Cognitive Abilities

PubMed Central

Michel, George F.; Campbell, Julie M.; Marcinowski, Emily C.; Nelson, Eliza L.; Babik, Iryna

2016-01-01

Hand preference develops in the first two postnatal years with nearly half of infants exhibiting a consistent early preference for acquiring objects. Others exhibit a more variable developmental trajectory but by the end of their second postnatal year, most exhibit a consistent hand preference for role-differentiated bimanual manipulation. According to some forms of embodiment theory, these differences in hand use patterns should influence the way children interact with their environments, which, in turn, should affect the structure and function of brain development. Such early differences in brain development should result in different trajectories of psychological development. We present evidence that children with consistent early hand preferences exhibit advanced patterns of cognitive development as compared to children who develop a hand preference later. Differences in the developmental trajectory of hand preference are predictive of developmental differences in language, object management skills, and tool-use skills. As predicted by Casasanto’s body-specificity hypothesis, infants with different hand preferences proceed along different developmental pathways of cognitive functioning. PMID:27047431

Differences in the Visual Perception of Symmetric Patterns in Orangutans (Pongo pygmaeus abelii) and Two Human Cultural Groups: A Comparative Eye-Tracking Study.

PubMed

Mühlenbeck, Cordelia; Liebal, Katja; Pritsch, Carla; Jacobsen, Thomas

2016-01-01

Symmetric structures are of importance in relation to aesthetic preference. To investigate whether the preference for symmetric patterns is unique to humans, independent of their cultural background, we compared two human populations with distinct cultural backgrounds (Namibian hunter-gatherers and German town dwellers) with one species of non-human great apes (Orangutans) in their viewing behavior regarding symmetric and asymmetric patterns in two levels of complexity. In addition, the human participants were asked to give their aesthetic evaluation of a subset of the presented patterns. The results showed that humans of both cultural groups fixated on symmetric patterns for a longer period of time, regardless of the pattern's complexity. On the contrary, Orangutans did not clearly differentiate between symmetric and asymmetric patterns, but were much faster in processing the presented stimuli and scanned the complete screen, while both human groups rested on the symmetric pattern after a short scanning time. The aesthetic evaluation test revealed that the fixation preference for symmetric patterns did not match with the aesthetic evaluation in the Hai//om group, whereas in the German group aesthetic evaluation was in accordance with the fixation preference in 60 percent of the cases. It can be concluded that humans prefer well-ordered structures in visual processing tasks, most likely because of a positive processing bias for symmetry, which Orangutans did not show in this task, and that, in humans, an aesthetic preference does not necessarily accompany the fixation preference.

Focus Group Findings about the Influence of Culture on Communication Preferences in End-of-Life Care

PubMed Central

Shrank, William H; Kutner, Jean S; Richardson, Terri; Mularski, Richard A; Fischer, Stacy; Kagawa-Singer, Marjorie

2005-01-01

Background Little guidance is available for health care providers who try to communicate with patients and their families in a culturally sensitive way about end-of-life care. Objective To explore the content and structure of end-of-life discussions that would optimize decision making by conducting focus groups with two diverse groups of patients that vary in ethnicity and socioeconomic status. Design Six focus groups were conducted; 3 included non-Hispanic white patients recruited from a University hospital (non-Hispanic white groups) and 3 included African-American patients recruited from a municipal hospital (African-American groups). A hypothetical scenario of a dying relative was used to explore preferences for the content and structure of communication. Participants Thirty-six non-Hispanic white participants and 34 African-American participants. Approach Content analysis of focus group transcripts. Results Non-Hispanic white participants were more exclusive when recommending family participants in end-of-life discussions while African-American participants preferred to include more family, friends and spiritual leaders. Requested content varied as non-Hispanic white participants desired more information about medical options and cost implications while African-American participants requested spiritually focused information. Underlying values also differed as non-Hispanic white participants expressed more concern with quality of life while African-American participants tended to value the protection of life at all costs. Conclusions The groups differed broadly in their preferences for both the content and structure of end-of-life discussions and on the values that influence those preferences. Further research is necessary to help practitioners engage in culturally sensitive end-of-life discussions with patients and their families by considering varying preferences for the goals of end-of-life care communication. PMID:16050878

Enhancement of polyisoprene latex production

NASA Technical Reports Server (NTRS)

Bauman, Albert J. (Inventor)

1979-01-01

Production of high molecular weight polyisoprene latex is enhanced by administering to plants, particularly Guayule Plants, an amine containing at least one two-carbon chain substituent and preferably substituted trialkylamine of the general structure: ##STR1## where R.sub.4, R.sub.5 and R.sub.6 are alkyl, preferably ethyl and at least one of R.sub.4, R.sub.5 and R.sub.6 is preferably an electron withdrawing group substituted aryloxy or arylthio ethyl group.

Interactions of small platinum clusters with the TiC(001) surface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mao, Jianjun; Li, Shasha; Chu, Xingli

2015-11-14

Density functional theory calculations are used to elucidate the interactions of small platinum clusters (Pt{sub n}, n = 1–5) with the TiC(001) surface. The results are analyzed in terms of geometric, energetic, and electronic properties. It is found that a single Pt atom prefers to be adsorbed at the C-top site, while a Pt{sub 2} cluster prefers dimerization and a Pt{sub 3} cluster forms a linear structure on the TiC(001). As for the Pt{sub 4} cluster, the three-dimensional distorted tetrahedral structure and the two-dimensional square structure almost have equal stability. In contrast with the two-dimensional isolated Pt{sub 5} cluster, the adsorbed Pt{submore » 5} cluster prefers a three-dimensional structure on TiC(001). Substantial charge transfer takes place from TiC(001) surface to the adsorbed Pt{sub n} clusters, resulting in the negatively charged Pt{sub n} clusters. At last, the d-band centers of the absorbed Pt atoms and their implications in the catalytic activity are discussed.« less

Inert electrode containing metal oxides, copper and noble metal

DOEpatents

Ray, Siba P.; Woods, Robert W.; Dawless, Robert K.; Hosler, Robert B.

2001-01-01

A cermet composite material is made by treating at an elevated temperature a mixture comprising a compound of iron and a compound of at least one other metal, together with an alloy or mixture of copper and a noble metal. The alloy or mixture preferably comprises particles having an interior portion containing more copper than noble metal and an exterior portion containing more noble metal than copper. The noble metal is preferably silver. The cermet composite material preferably includes alloy phase portions and a ceramic phase portion. At least part of the ceramic phase portion preferably has a spinel structure.

Inert electrode containing metal oxides, copper and noble metal

DOEpatents

Ray, Siba P.; Woods, Robert W.; Dawless, Robert K.; Hosler, Robert B.

2000-01-01

A cermet composite material is made by treating at an elevated temperature a mixture comprising a compound of iron and a compound of at least one other metal, together with an alloy or mixture of copper and a noble metal. The alloy or mixture preferably comprises particles having an interior portion containing more copper than noble metal and an exterior portion containing more noble metal than copper. The noble metal is preferably silver. The cermet composite material preferably includes alloy phase portions and a ceramic phase portion. At least part of the ceramic phase portion preferably has a spinel structure.

Identification of the Ah-Receptor Structural Determinants for Ligand Preferences

PubMed Central

Xing, Yongna

2012-01-01

The aryl hydrocarbon receptor (AHR) is a transcription factor that responds to diverse ligands and plays a critical role in toxicology, immune function, and cardiovascular physiology. The structural basis of the AHR for ligand promiscuity and preferences is critical for understanding AHR function. Based on the structure of a closely related protein HIF2α, we modeled the AHR ligand binding domain (LBD) bound to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and benzo(a)pyrene (BaP) and identified residues that control ligand preferences by shape and H-bond potential. Mutations to these residues, particularly Q377 and G298, resulted in robust and opposite changes in the potency of TCDD and BaP and up to a 20-fold change in the ratio of TCDD/BaP efficacy. The model also revealed a flexible “belt” structure; molecular dynamic (MD) simulation suggested that the “belt” and several other structural elements in the AHR-LBD are more flexible than HIF2α and likely contribute to ligand promiscuity. Molecular docking of TCDD congeners to a model of human AHR-LBD ranks their binding affinity similar to experimental ranking of their toxicity. Our study reveals key structural basis for prediction of toxicity and understanding the AHR signaling through diverse ligands. PMID:22659362

The dependency structure of coordinate phrases: a corpus approach.

PubMed

Temperley, David

2005-11-01

Hudson (1990) proposes that each conjunct in a coordinate phrase forms dependency relations with heads or dependents outside the coordinate phrase (the "multi-head" view). This proposal is tested through corpus analysis of Wall Street Journal text. For right-branching constituents (such as direct-object NPs), a short-long preference for conjunct ordering is observed; this is predicted by the multi-head view, under the assumption that structures resulting in shorter dependencies are preferred. A short-long preference is also observed for left-branching constituents (such as subject NPs), which is less obviously accommodated by the multi-head view but not incompatible with it. The repetition of determiners was also examined (the dog and cat versus the dog and the cat), and a stronger preference was found for repetition with singular count nouns as opposed to mass or plural nouns; this accords well with the multi-head view, under the reasoning that single-determiner constructions require crossing dependencies with count nouns but not with plural or mass nouns.

Synthesis and characterization of polyurethane/bentonite nanoclay based nanocomposites using different diisocyanates: relation between mechanical and thermal properties

NASA Astrophysics Data System (ADS)

Bocchio, Javier; Wittemberg, Víctor; Quagliano, Javier

2017-05-01

Polyurethanes (PUs) and polyurethane nanocomposites (PUNC) with bentonite nanoclay were prepared by the reaction of toluene-2,4-diisocyanate (TDI), dimeryl diisocyanate (DDI) and isophorone diisocyanate (IPDI) with two different polymers: hydroxyl terminated polybutadiene (HTPB) and polytetramethylene ether glycol (PTMEG), and the chains were further extended with 1,4-butanediol (1,4-BDO) to get final PUs and PUNCs. PUNCs were prepared by dispersing within the polymers a commercial and a synthesized bentonite nanoclay by mechanical dispersion. Mechanical properties showed that the addition of a small amount of nanoclay resulted in a significant increase in tensile strength and reduction in elongation at break (maximum increase of 2.3 and 5-times reduction, respectively, for a HTPB-TDI-BDO PUNCs). Thermal analysis revealed that the addition of nanoclays improved the thermal stability and increased decomposition temperature of PUNCs. We concluded that there is a positive correlation between mechanical and thermal properties as a result of nanoclay addition.

Strain Rate Behavior of HTPB-Based Magnetorheological Materials

NASA Astrophysics Data System (ADS)

Stoltz, Chad; Seminuk, Kenneth; Joshi, Vasant

2013-06-01

It is of particular interest to determine whether the mechanical properties of binder systems can be manipulated by adding ferrous or Magnetostrictive particulates. Strain rate response of two HTPB/Fe (Hydroxyl-terminated Polybutadiene/Iron) compositions under electromagnetic fields has been investigated using a Split Hopkinson Pressure bar arrangement equipped with aluminum bars. Two HTPB/Fe compositions were developed, the first without plasticizer and the second containing plasticizer. Samples were tested with and without the application of a 0.01 Tesla magnetic field coil. Strain gauge data taken from the Split Hopkinson Pressure bar has been used to determine what mechanical properties were changed by inducing a mild electromagnetic field onto each sample. The data reduction method to obtain stress-strain plots included dispersion corrections for deciphering minute changes due to compositional alterations. Data collected from the Split Hopkinson Pressure bar indicate changes in the Mechanical Stress-Strain curves and suggest that the impedance of a binder system can be altered by means of a magnetic field. We acknowledge the Defense Threat Reduction Agency for funding.

A research on polyether glycol replaced APCP rocket propellant

NASA Astrophysics Data System (ADS)

Lou, Tianyou; Bao, Chun Jia; Wang, Yiyang

2017-08-01

Ammonium perchlorate composite propellant (APCP) is a modern solid rocket propellant used in rocket vehicles. It differs from many traditional solid rocket propellants by the nature of how it is processed. APCP is cast into shape, as opposed to powder pressing it with black powder. This provides manufacturing regularity and repeatability, which are necessary requirements for use in the aerospace industry. For traditional APCP, ingredients normally used are ammonium peroxide, aluminum, Hydroxyl-terminated polybutadiene(HTPB), curing agency and other additives, the greatest disadvantage is that the fuel is too expensive. According to the price we collected in our country, a single kilogram of this fuel will cost 200 Yuan, which is about 35 dollars, for a fan who may use tons of the fuel in a single year, it definitely is a great deal of money. For this reason, we invented a new kind of APCP fuel. Changing adhesive agency from cross-linked htpb to cross linked polyether glycol gives a similar specific thrust, density and mechanical property while costs a lower price.

Chemiluminescence as a condition monitoring method for thermal aging and lifetime prediction of an HTPB elastomer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gillen, Kenneth Todd; Minier, Leanna M. G.; Celina, Mathias C.

Chemiluminescence (CL) has been applied as a condition monitoring technique to assess aging related changes in a hydroxyl-terminated-polybutadiene based polyurethane elastomer. Initial thermal aging of this polymer was conducted between 110 and 50 C. Two CL methods were applied to examine the degradative changes that had occurred in these aged samples: isothermal 'wear-out' experiments under oxygen yielding initial CL intensity and 'wear-out' time data, and temperature ramp experiments under inert conditions as a measure of previously accumulated hydroperoxides or other reactive species. The sensitivities of these CL features to prior aging exposure of the polymer were evaluated on the basismore » of qualifying this method as a quick screening technique for quantification of degradation levels. Both the techniques yielded data representing the aging trends in this material via correlation with mechanical property changes. Initial CL rates from the isothermal experiments are the most sensitive and suitable approach for documenting material changes during the early part of thermal aging.« less

The detection of conformational disorder by thermal analysis

NASA Astrophysics Data System (ADS)

Wunderlich, B.

Conformational disorder in crystals is found in many molecules that possess a plurality of conformational isomers. Typical examples are linear macromolecules such as polyethylene, polytetrafluoroethylene and trans-1,4-polybutadiene; and small molecules such as paraffins, cycloparaffins, soaps, lipids and many liquid-crystal forming molecules. Conformational motion is often coupled with the cooperative creation of disorder. In this case a heat and entropy of transition is observed by thermal analysis. Levels of transition entropies can be estimated, assuming most of the disorder can be traced to conformational isomerism. In case there is conformational disorder frozen-in at low temperature, thermal analysis can be used to find the glass transition of a condis crystal. An Advanced Thermal Analysis System has been developed, and will be described that permits a detailed interpretation of the thermal analysis traces. It rests with the establishment of high quality heat capacity for the rigid solid state (vibration only) and the mobile liquid state (vibrations and large amplitude cooperative motion).

The detection of conformational disorder by thermal analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wunderlich, B.

1988-01-01

Conformational disorder in crystals is found in many molecules that possess a plurality of conformational isomers. Typical examples are linear macromolecules such as polyethylene, polytetrafluoroethylene and trans-1,4-polybutadiene; and small molecules such as paraffins, cycloparaffins, soaps, lipids and many liquid-crystal forming molecules. Conformational motion is often coupled with the cooperative creation of disorder. In this case a heat and entropy of transition is observed by thermal analysis. Levels of transition entropies can be estimated, assuming most of the disorder can be traced to conformational isomerism. In case there is conformational disorder frozen-in at low temperature, thermal analysis can be used tomore » find the glass transition of a condis crystal. An Advanced Thermal Analysis System has been developed, and will be described that permits a detailed interpretation of the thermal analysis traces. It rests with the establishment of high quality heat capacity for the rigid solid state (vibration only) and the mobile liquid state (vibrations and large amplitude cooperative motion). 36 refs., 3 figs.« less

Small-Scale Hybrid Rocket Test Stand & Characterization of Swirl Injectors

NASA Astrophysics Data System (ADS)

Summers, Matt H.

Derived from the necessity to increase testing capabilities of hybrid rocket motor (HRM) propulsion systems for Daedalus Astronautics at Arizona State University, a small-scale motor and test stand were designed and developed to characterize all components of the system. The motor is designed for simple integration and setup, such that both the forward-end enclosure and end cap can be easily removed for rapid integration of components during testing. Each of the components of the motor is removable allowing for a broad range of testing capabilities. While examining injectors and their potential it is thought ideal to obtain the highest regression rates and overall motor performance possible. The oxidizer and fuel are N2O and hydroxyl-terminated polybutadiene (HTPB), respectively, due to previous experience and simplicity. The injector designs, selected for the same reasons, are designed such that they vary only in the swirl angle. This system provides the platform for characterizing the effects of varying said swirl angle on HRM performance.

A periodic mixed gaussians-plane waves DFT study on simple thiols on Au(111): adsorbate species, surface reconstruction, and thiols functionalization.

PubMed

Rajaraman, Gopalan; Caneschi, Andrea; Gatteschi, Dante; Totti, Federico

2011-03-07

Here we present DFT calculations based on a periodic mixed gaussians/plane waves approach to study the energetics, structure, bonding of SAMs of simple thiols on Au(111). Several open issues such as structure, bonding and the nature of adsorbate are taken into account. We started with methyl thiols (MeSH) on Au(111) to establish the nature of the adsorbate. We have considered several structural models embracing the reconstructed surface scenario along with the MeS˙-Au(ad)-MeS˙ type motif put forward in recent years. Our calculations suggest a clear preference for the homolytic cleavage of the S-H bond leading to a stable MeS˙ on a gold surface. In agreement with the recent literature studies, the reconstructed models of the MeS˙ species are found to be energetically preferred over unreconstructed models. Besides, our calculations reveal that the model with 1:2 Au(ad)/thiols ratio, i.e. MeS˙-Au(ad)-MeS˙, is energetically preferred compared to the clean and 1:1 ratio models, in agreement with the experimental and theoretical evidences. We have also performed Molecular Orbital/Natural Bond Orbital, MO/NBO, analysis to understand the electronic structure and bonding in different structural motifs and many useful insights have been gained. Finally, the studies have then been extended to alkyl thiols of the RSR' (R, R' = Me, Et and Ph) type and here our calculations again reveal a preference for the RS˙ type species adsorption for clean as well as for reconstructed 1:2 Au(ad)/thiols ratio models.

Structural determination of intact proteins using mass spectrometry

DOEpatents

Kruppa, Gary [San Francisco, CA; Schoeniger, Joseph S [Oakland, CA; Young, Malin M [Livermore, CA

2008-05-06

The present invention relates to novel methods of determining the sequence and structure of proteins. Specifically, the present invention allows for the analysis of intact proteins within a mass spectrometer. Therefore, preparatory separations need not be performed prior to introducing a protein sample into the mass spectrometer. Also disclosed herein are new instrumental developments for enhancing the signal from the desired modified proteins, methods for producing controlled protein fragments in the mass spectrometer, eliminating complex microseparations, and protein preparatory chemical steps necessary for cross-linking based protein structure determination.Additionally, the preferred method of the present invention involves the determination of protein structures utilizing a top-down analysis of protein structures to search for covalent modifications. In the preferred method, intact proteins are ionized and fragmented within the mass spectrometer.

Prelude and Fugue, predicting local protein structure, early folding regions and structural weaknesses.

PubMed

Kwasigroch, Jean Marc; Rooman, Marianne

2006-07-15

Prelude&Fugue are bioinformatics tools aiming at predicting the local 3D structure of a protein from its amino acid sequence in terms of seven backbone torsion angle domains, using database-derived potentials. Prelude(&Fugue) computes all lowest free energy conformations of a protein or protein region, ranked by increasing energy, and possibly satisfying some interresidue distance constraints specified by the user. (Prelude&)Fugue detects sequence regions whose predicted structure is significantly preferred relative to other conformations in the absence of tertiary interactions. These programs can be used for predicting secondary structure, tertiary structure of short peptides, flickering early folding sequences and peptides that adopt a preferred conformation in solution. They can also be used for detecting structural weaknesses, i.e. sequence regions that are not optimal with respect to the tertiary fold. http://babylone.ulb.ac.be/Prelude_and_Fugue.

Effects of age on navigation strategy.

PubMed

Rodgers, M Kirk; Sindone, Joseph A; Moffat, Scott D

2012-01-01

Age differences in navigation strategies have been demonstrated in animals, with aged animals more likely to prefer an egocentric (route) strategy and younger animals more likely to prefer an allocentric (place) strategy. Using a novel virtual Y-maze strategy assessment (vYSA), the present study demonstrated substantial age differences in strategy preference in humans. Older adults overwhelmingly preferred an egocentric strategy, while younger adults were equally distributed between egocentric and allocentric preference. A preference for allocentric strategy on the Y-maze strategy assessment was found to benefit performance on an independent assessment (virtual Morris water task) only in younger adults. These results establish baseline age differences in spatial strategies and suggest this may impact performance on other spatial navigation assessments. The results are interpreted within the framework of age differences in hippocampal structure and function. Copyright © 2012 Elsevier Inc. All rights reserved.

Imprinting and flexibility in human face cognition.

PubMed

Marcinkowska, Urszula M; Terraube, Julien; Kaminski, Gwenaël

2016-09-29

Faces are an important cue to multiple physiological and psychological traits. Human preferences for exaggerated sex typicality (masculinity or femininity) in faces depend on multiple factors and show high inter-subject variability. To gain a deeper understanding of the mechanisms underlying facial femininity preferences in men, we tested the interactive effect of family structure (birth order, sibling sex-ratio and number of siblings) and parenthood status on these preferences. Based on a group of 1304 heterosexual men, we have found that preference for feminine faces was not only influenced by sibling age and sex, but also that fatherhood modulated this preference. Men with sisters had a weaker preference for femininity than men with brothers, highlighting a possible effect of a negative imprinting-like mechanism. What is more, fatherhood increased strongly the preference for facial femininity. Finally, for fathers with younger sisters only, the more the age difference increased between them, the more femininity preference increased. Overall our findings bring new insight into how early-acquired experience at the individual level may determine face preference in adulthood, and what is more, how these preferences are flexible and potentially dependent on parenthood status in adult men.

Imprinting and flexibility in human face cognition

PubMed Central

Marcinkowska, Urszula M.; Terraube, Julien; Kaminski, Gwenaël

2016-01-01

Faces are an important cue to multiple physiological and psychological traits. Human preferences for exaggerated sex typicality (masculinity or femininity) in faces depend on multiple factors and show high inter-subject variability. To gain a deeper understanding of the mechanisms underlying facial femininity preferences in men, we tested the interactive effect of family structure (birth order, sibling sex-ratio and number of siblings) and parenthood status on these preferences. Based on a group of 1304 heterosexual men, we have found that preference for feminine faces was not only influenced by sibling age and sex, but also that fatherhood modulated this preference. Men with sisters had a weaker preference for femininity than men with brothers, highlighting a possible effect of a negative imprinting-like mechanism. What is more, fatherhood increased strongly the preference for facial femininity. Finally, for fathers with younger sisters only, the more the age difference increased between them, the more femininity preference increased. Overall our findings bring new insight into how early-acquired experience at the individual level may determine face preference in adulthood, and what is more, how these preferences are flexible and potentially dependent on parenthood status in adult men. PMID:27680495

Bridging gaps: On the performance of airborne LiDAR to model wood mouse-habitat structure relationships in pine forests.

PubMed

Jaime-González, Carlos; Acebes, Pablo; Mateos, Ana; Mezquida, Eduardo T

2017-01-01

LiDAR technology has firmly contributed to strengthen the knowledge of habitat structure-wildlife relationships, though there is an evident bias towards flying vertebrates. To bridge this gap, we investigated and compared the performance of LiDAR and field data to model habitat preferences of wood mouse (Apodemus sylvaticus) in a Mediterranean high mountain pine forest (Pinus sylvestris). We recorded nine field and 13 LiDAR variables that were summarized by means of Principal Component Analyses (PCA). We then analyzed wood mouse's habitat preferences using three different models based on: (i) field PCs predictors, (ii) LiDAR PCs predictors; and (iii) both set of predictors in a combined model, including a variance partitioning analysis. Elevation was also included as a predictor in the three models. Our results indicate that LiDAR derived variables were better predictors than field-based variables. The model combining both data sets slightly improved the predictive power of the model. Field derived variables indicated that wood mouse was positively influenced by the gradient of increasing shrub cover and negatively affected by elevation. Regarding LiDAR data, two LiDAR PCs, i.e. gradients in canopy openness and complexity in forest vertical structure positively influenced wood mouse, although elevation interacted negatively with the complexity in vertical structure, indicating wood mouse's preferences for plots with lower elevations but with complex forest vertical structure. The combined model was similar to the LiDAR-based model and included the gradient of shrub cover measured in the field. Variance partitioning showed that LiDAR-based variables, together with elevation, were the most important predictors and that part of the variation explained by shrub cover was shared. LiDAR derived variables were good surrogates of environmental characteristics explaining habitat preferences by the wood mouse. Our LiDAR metrics represented structural features of the forest patch, such as the presence and cover of shrubs, as well as other characteristics likely including time since perturbation, food availability and predation risk. Our results suggest that LiDAR is a promising technology for further exploring habitat preferences by small mammal communities.

Realistic Free-Spins Features Increase Preference for Slot Machines.

PubMed

Taylor, Lorance F; Macaskill, Anne C; Hunt, Maree J

2017-06-01

Despite increasing research into how the structural characteristics of slot machines influence gambling behaviour there have been no experimental investigations into the effect of free-spins bonus features-a structural characteristic that is commonly central to the design of slot machines. This series of three experiments investigated the free-spins feature using slot machine simulations to determine whether participants allocate more wagers to a machine with free spins, and, which components of free-spins features drive this preference. In each experiment, participants were exposed to two computer-simulated slot machines-one with a free-spins feature or similar bonus feature and one without. Participants then completed a testing phase where they could freely switch between the two machines. In Experiment 1, participants did not prefer the machine with a simple free-spins feature. In Experiment 2 the free-spins feature incorporated additional elements such as sounds, animations, and an increased win frequency; participants preferred to gamble on this machine. The Experiment 3 "bonus feature" machine resembled the free spins machine in Experiment 2 except spins were not free; participants showed a clear preference for this machine also. These findings indicate that (1) free-spins features have a major influence over machine choice and (2) the "freeness" of the free-spins bonus features is not an important driver of preference, contrary to self-report and interview research with gamblers.

Optics and materials research for controlled radiant energy transfer in buildings

NASA Astrophysics Data System (ADS)

Goldner, R. B.

1983-11-01

The overall objective of the Tufts research program was to identify and attempt to solve some of the key materials problems associated with practical approaches for achieving controlled radiant energy transfer (CRET) through building windows and envelopes, so as to decrease heating and cooling loads in buildings. Major accomplishments included: the identification of electrochromic (EC)-based structures as the preferred structures for achieving CRET; the identification of modulated reflectivity as the preferred mode of operation for EC-based structures; demonstration of the feasibility of operating EC-materials in a modulated R(lambda) mode; and demonstration of the applicability of free electron model to colored polycrystalline WO3 films.

Sequence, Structure, and Context Preferences of Human RNA Binding Proteins.

PubMed

Dominguez, Daniel; Freese, Peter; Alexis, Maria S; Su, Amanda; Hochman, Myles; Palden, Tsultrim; Bazile, Cassandra; Lambert, Nicole J; Van Nostrand, Eric L; Pratt, Gabriel A; Yeo, Gene W; Graveley, Brenton R; Burge, Christopher B

2018-06-07

RNA binding proteins (RBPs) orchestrate the production, processing, and function of mRNAs. Here, we present the affinity landscapes of 78 human RBPs using an unbiased assay that determines the sequence, structure, and context preferences of these proteins in vitro by deep sequencing of bound RNAs. These data enable construction of "RNA maps" of RBP activity without requiring crosslinking-based assays. We found an unexpectedly low diversity of RNA motifs, implying frequent convergence of binding specificity toward a relatively small set of RNA motifs, many with low compositional complexity. Offsetting this trend, however, we observed extensive preferences for contextual features distinct from short linear RNA motifs, including spaced "bipartite" motifs, biased flanking nucleotide composition, and bias away from or toward RNA structure. Our results emphasize the importance of contextual features in RNA recognition, which likely enable targeting of distinct subsets of transcripts by different RBPs that recognize the same linear motif. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Static ferroelectric memory transistor having improved data retention

DOEpatents

Evans, Jr., Joseph T.; Warren, William L.; Tuttle, Bruce A.

1996-01-01

An improved ferroelectric FET structure in which the ferroelectric layer is doped to reduce retention loss. A ferroelectric FET according to the present invention includes a semiconductor layer having first and second contacts thereon, the first and second contacts being separated from one another. The ferroelectric FET also includes a bottom electrode and a ferroelectric layer which is sandwiched between the semiconductor layer and the bottom electrode. The ferroelectric layer is constructed from a perovskite structure of the chemical composition ABO.sub.3 wherein the B site comprises first and second elements and a dopant element that has an oxidation state greater than +4 in sufficient concentration to impede shifts in the resistance measured between the first and second contacts with time. The ferroelectric FET structure preferably comprises Pb in the A-site. The first and second elements are preferably Zr and Ti, respectively. The preferred B-site dopants are Niobium, Tantalum, and Tungsten at concentrations between 1% and 8%.

Saudi mothers' preferences about breaking bad news concerning newborns: a structured verbal questionnaire

PubMed Central

2011-01-01

Background Breaking bad news (BBN) to parents whose newborn has a major disease is an ethical dilemma. In Saudi Arabia, BBN about newborns is performed according to the parental preferences that have been reported from non-Arabic/non-Islamic countries. Saudi mothers' preferences about BBN have not yet been studied. Therefore, we aimed to elicit the preferences of Saudi mothers about BBN concerning newborns. Methods We selected a convenience sample of 402 Saudi mothers, aged 18-50 years, who had no previous experience with BBN. We selected them via a simple number-randomization scheme from the premises of a level III Saudi hospital between October of 2009 and January of 2011. We used a hypothetical situation (BBN about trisomy 21) to elicit their preferences about BBN concerning newborns via a structured verbal questionnaire composed of 12 multiple-choice questions. We expressed their preferences as percentages (95% confidence interval), and we used the Kendall's W test (W) to assess the degree of agreement in preferences. Results The Saudi mothers preferred that BBN be conducted with both parents together (64% [60-69]), albeit with weak levels of agreement (W = 0.29). They showed moderate agreement in their preferences that BBN should be conducted early (79% [75-83], W = 0.48), in detail (81% [77-85], W = 0.52), in person (88% [85-91], W = 0.58), and in a quiet setting (86% [83-90], W = 0.53). With extremely weak agreement, they preferred to have a known person present for support during BBN (56% [51-61], W = 0.01), to have close bodily contact with their babies (66% [61-70], W = 0.10), and to have no another patients present (64% [59-68], W = 0.08). They showed moderate levels of agreement in their desires to detail, in advance, their preferences about process of BBN by giving a reversible, written informed consent that could be utilized for guidance, if needed (80% [76-84], W = 0.36). Conclusions In our experience, Saudi mothers' preferences about BBN concerning newborns are varied, suggesting that a "one-size-fits-all" approach is inappropriate. A reversible, written informed consent detailing their preferences about BBN that would be kept in their medical records and utilized for guidance, if needed, may be the best solution, given this level of diversity. These findings merit further study. PMID:21861876

Understanding Messaging Preferences to Inform Development of Mobile Goal-Directed Behavioral Interventions

PubMed Central

van Stolk-Cooke, Katherine; Morgenstern, Jon; Kuerbis, Alexis N; Markle, Kendra

2014-01-01

Background Mobile messaging interventions have been shown to improve outcomes across a number of mental health and health-related conditions, but there are still significant gaps in our knowledge of how to construct and deliver the most effective brief messaging interventions. Little is known about the ways in which subtle linguistic variations in message content can affect user receptivity and preferences. Objective The aim of this study was to determine whether any global messaging preferences existed for different types of language content, and how certain characteristics moderate those preferences, in an effort to inform the development of mobile messaging interventions. Methods This study examined user preferences for messages within 22 content groupings. Groupings were presented online in dyads of short messages that were identical in their subject matter, but structurally or linguistically varied. Participants were 277 individuals residing in the United States who were recruited and compensated through Amazon’s Mechanical Turk (MTurk) system. Participants were instructed to select the message in each dyad that they would prefer to receive to help them achieve a personal goal of their choosing. Results Results indicate global preferences of more than 75% of subjects for certain types of messages, such as those that were grammatically correct, free of textese, benefit-oriented, polite, nonaggressive, and directive as opposed to passive, among others. For several classes of messages, few or no clear global preferences were found. There were few personality- and trait-based moderators of message preferences, but subtle manipulations of message structure, such as changing “Try to…” to “You might want to try to…” affected message choice. Conclusions The results indicate that individuals are sensitive to variations in the linguistic content of text messages designed to help them achieve a personal goal and, in some cases, have clear preferences for one type of message over another. Global preferences were indicated for messages that contained accurate spelling and grammar, as well as messages that emphasize the positive over the negative. Research implications and a guide for developing short messages for goal-directed behaviors are presented in this paper. PMID:24500775

Fortification of Wheat Bread with Agroindustry By-Products: Statistical Methods for Sensory Preference Evaluation and Correlation with Color and Crumb Structure.

PubMed

Martins, Z E; Pinho, O; Ferreira, I M P L V O

2017-09-01

The use of agroindustry by-products (BP) for fortification of wheat bread can be an alternative to waste disposal because BP are appealing sources of dietary fiber. Moreover, it may also contribute to indirect income generation. In this study, sensory, color, and crumb structure properties of breads fortified with fiber rich fraction recovered from four types of agroindustry BP were tested, namely orange (OE), pomegranate (PE), elderberry (EE), and spent yeast (YE). Statistical models for sensory preference evaluation and correlation with color and crumb structure were developed. External preference mapping indicated consumer preferences and enabled selection of the concentrations of BP fibre-rich fraction with best acceptance, namely 7.0% EE, 2.5% OE, 5.0% PE, and 2.5% YE. Data collected from image analysis complemented sensory profile information, whereas multivariate PLS regression provided information on the relationship between "crust color" and "crumb color" and instrumental data. Regression models developed for both sensory attributes presented good fitting (R 2 Y > 0.700) and predictive ability (Q 2 > 0.500), with low RMSE. Crust and crumb a* parameters had a positive influence on "crust color" and "crumb color" models, while crust L* and b* had a negative influence. © 2017 Institute of Food Technologists®.

Finding the target sites of RNA-binding proteins

PubMed Central

Li, Xiao; Kazan, Hilal; Lipshitz, Howard D; Morris, Quaid D

2014-01-01

RNA–protein interactions differ from DNA–protein interactions because of the central role of RNA secondary structure. Some RNA-binding domains (RBDs) recognize their target sites mainly by their shape and geometry and others are sequence-specific but are sensitive to secondary structure context. A number of small- and large-scale experimental approaches have been developed to measure RNAs associated in vitro and in vivo with RNA-binding proteins (RBPs). Generalizing outside of the experimental conditions tested by these assays requires computational motif finding. Often RBP motif finding is done by adapting DNA motif finding methods; but modeling secondary structure context leads to better recovery of RBP-binding preferences. Genome-wide assessment of mRNA secondary structure has recently become possible, but these data must be combined with computational predictions of secondary structure before they add value in predicting in vivo binding. There are two main approaches to incorporating structural information into motif models: supplementing primary sequence motif models with preferred secondary structure contexts (e.g., MEMERIS and RNAcontext) and directly modeling secondary structure recognized by the RBP using stochastic context-free grammars (e.g., CMfinder and RNApromo). The former better reconstruct known binding preferences for sequence-specific RBPs but are not suitable for modeling RBPs that recognize shape and geometry of RNAs. Future work in RBP motif finding should incorporate interactions between multiple RBDs and multiple RBPs in binding to RNA. WIREs RNA 2014, 5:111–130. doi: 10.1002/wrna.1201 PMID:24217996

Structure of the ordered hydration of amino acids in proteins: analysis of crystal structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biedermannová, Lada, E-mail: lada.biedermannova@ibt.cas.cz; Schneider, Bohdan

2015-10-27

The hydration of protein crystal structures was studied at the level of individual amino acids. The dependence of the number of water molecules and their preferred spatial localization on various parameters, such as solvent accessibility, secondary structure and side-chain conformation, was determined. Crystallography provides unique information about the arrangement of water molecules near protein surfaces. Using a nonredundant set of 2818 protein crystal structures with a resolution of better than 1.8 Å, the extent and structure of the hydration shell of all 20 standard amino-acid residues were analyzed as function of the residue conformation, secondary structure and solvent accessibility. Themore » results show how hydration depends on the amino-acid conformation and the environment in which it occurs. After conformational clustering of individual residues, the density distribution of water molecules was compiled and the preferred hydration sites were determined as maxima in the pseudo-electron-density representation of water distributions. Many hydration sites interact with both main-chain and side-chain amino-acid atoms, and several occurrences of hydration sites with less canonical contacts, such as carbon–donor hydrogen bonds, OH–π interactions and off-plane interactions with aromatic heteroatoms, are also reported. Information about the location and relative importance of the empirically determined preferred hydration sites in proteins has applications in improving the current methods of hydration-site prediction in molecular replacement, ab initio protein structure prediction and the set-up of molecular-dynamics simulations.« less

Syrian Women’s Preferences for Birth Attendant and Birth Place

PubMed Central

Bashour, Hyam; Abdulsalam, Asmaa

2006-01-01

Background Women’s preferences for type of maternity caregiver and birth place have gained importance and have been documented in studies reported from the developed world. The purpose of our study was to identify Syrian women’s preferences for birth attendant and place of delivery. Methods Interviews with 500 women living in Damascus and its suburbs were conducted using a pretested structured questionnaire. Women were asked about their preferences for the birth attendant and place of delivery, and an open-ended question asked them to give an explanation for their preferences. We analyzed preferences and their determinants, and also agreement between actual and preferred place of delivery and birth attendant. Results Only a small minority of women (5–10%) had no preference. Most (65.8%) preferred to give birth at the hospital, and 60.4 percent preferred to be attended by doctors compared with midwives (21.2%). More than 85 percent of women preferred the obstetrician to be a female. The actual place of delivery and type of birth attendant did not match the preferred place of delivery and type of birth attendant. Women’s reasons for preferences were a perception of safety and competence, and communication style of caregiver. Conclusions Most women preferred to be delivered by female doctors at a hospital in this population sample in Syria. The findings suggest that proper understanding of women’s preferences is needed, and steps should be taken to enable women to make good choices. Policies about maternity education and services should take into account women’s preferences. PMID:15725201

Teacher Preferences for Alternative School Site Administrative Models

ERIC Educational Resources Information Center

Hewitt, Paul M.; Denny, George S.; Pijanowski, John C.

2012-01-01

Public school teachers with high leadership potential who stated that they had no interest in being school principals were surveyed on their attitudes about six alternative school site administrative organizational models. Of the 391 teachers surveyed, 53% identified the Co-Principal model as the preferred school site administrative structure. In…

24 CFR 1000.52 - What tribal or Indian preference requirements apply to IHBG procurement?

Code of Federal Regulations, 2013 CFR

2013-04-01

... structure, management, and financing affecting the Indian character of the enterprise, including major... projects funded under this part to Indian organizations and Indian-owned economic enterprises in accordance... organizations and Indian-owned enterprises; or (iii) Use a two-stage preference procedure, as follows: (A) Stage...

24 CFR 1000.52 - What tribal or Indian preference requirements apply to IHBG procurement?

Code of Federal Regulations, 2014 CFR

2014-04-01

... structure, management, and financing affecting the Indian character of the enterprise, including major... projects funded under this part to Indian organizations and Indian-owned economic enterprises in accordance... organizations and Indian-owned enterprises; or (iii) Use a two-stage preference procedure, as follows: (A) Stage...

An exploratory mixed-methods crossover study comparing DVD- vs. Web-based patient decision support in three conditions: The importance of patient perspectives.

PubMed

Halley, Meghan C; Rendle, Katharine A S; Gillespie, Katherine A; Stanley, Katherine M; Frosch, Dominick L

2015-12-01

The last 15 years have witnessed considerable progress in the development of decision support interventions (DESIs). However, fundamental questions about design and format of delivery remain. An exploratory, randomized mixed-method crossover study was conducted to compare a DVD- and Web-based DESI. Randomized participants used either the Web or the DVD first, followed by the alternative format. Participants completed a questionnaire to assess decision-specific knowledge at baseline and a questionnaire and structured qualitative interview after viewing each format. Tracking software was used to capture Web utilization. Transcripts were analyzed using integrated inductive and deductive approaches. Quantitative data were analyzed using exploratory bivariate and multivariate analyses. Exploratory knowledge analyses suggest that both formats increased knowledge, with limited evidence that the DVD increased knowledge more than the Web. Format preference varied across participants: 44% preferred the Web, 32% preferred the DVD and 24% preferred 'both'. Patient discussions of preferences for DESI information structure and the importance of a patients' stage of a given decision suggest these characteristics may be important factors underlying variation in utilization, format preferences and knowledge outcomes. Our results suggest that both DESI formats effectively increase knowledge. Patients' perceptions of these two formats further suggest that there may be no single 'best' format for all patients. These results have important implications for understanding why different DESI formats might be preferable to and more effective for different patients. Further research is needed to explore the relationship between these factors and DESI utilization outcomes across diverse patient populations. © 2014 John Wiley & Sons Ltd.

Differences in the Visual Perception of Symmetric Patterns in Orangutans (Pongo pygmaeus abelii) and Two Human Cultural Groups: A Comparative Eye-Tracking Study

PubMed Central

Mühlenbeck, Cordelia; Liebal, Katja; Pritsch, Carla; Jacobsen, Thomas

2016-01-01

Symmetric structures are of importance in relation to aesthetic preference. To investigate whether the preference for symmetric patterns is unique to humans, independent of their cultural background, we compared two human populations with distinct cultural backgrounds (Namibian hunter-gatherers and German town dwellers) with one species of non-human great apes (Orangutans) in their viewing behavior regarding symmetric and asymmetric patterns in two levels of complexity. In addition, the human participants were asked to give their aesthetic evaluation of a subset of the presented patterns. The results showed that humans of both cultural groups fixated on symmetric patterns for a longer period of time, regardless of the pattern’s complexity. On the contrary, Orangutans did not clearly differentiate between symmetric and asymmetric patterns, but were much faster in processing the presented stimuli and scanned the complete screen, while both human groups rested on the symmetric pattern after a short scanning time. The aesthetic evaluation test revealed that the fixation preference for symmetric patterns did not match with the aesthetic evaluation in the Hai//om group, whereas in the German group aesthetic evaluation was in accordance with the fixation preference in 60 percent of the cases. It can be concluded that humans prefer well-ordered structures in visual processing tasks, most likely because of a positive processing bias for symmetry, which Orangutans did not show in this task, and that, in humans, an aesthetic preference does not necessarily accompany the fixation preference. PMID:27065184

Emulsification Of Eutectic Salt Mixtures In Fluid Vehicles

NASA Astrophysics Data System (ADS)

Vanderhoff, J. W.; El-Aasser, M. S.; Hawkins, T. W.

1988-05-01

High-internal-phase-volume emulsions of 75 volt 3/18/79 potassium iodide/sodium iodide/ urea model eutectic salt mixture in 83.5/16.5 Sartomer R-45HT hydroxy-terminated polybutadi-ene/Nujol mineral oil binder mixture were prepared at 60°C using water-in-oil emulsifiers and cured with isophorone diisocyanate or Desmodur N-100. The Nujol mineral oil enhanced the emulsification with a negligible reduction in the tensile properties of the cured elastomer. The average emulsion droplet sizes were ca. 200 nm initially, but increased slowly during curing to 500-1000 nm. The coalescence of the emulsion droplets followed the second-order dependence predicted by the von Smoluchowski diffusion-controlled flocculation; the rate constants were 1.05x10-18 and 9.58x10-18 cc/droplet-sec for dirnethyldioctadecylammonium bromide and Span 85 sorbitan trioleate, respectively. The isophorone diisocyanate reacted with emulsifiers containing primary hydroxyl or amine groups, to give unstable emulsions or no emulsions at all. Dimethyldioctadecylammonium bromide with no primary hydroxyl or amine groups, however, did not react with isocyanates and gave stable emulsions. The reaction of the R-45HT hydroxy-terminated polybutadiene with isophorone diisocyanate followed the expec-ted second-order kinetics with a rate constant of 3.42x10-4 liters/mole-sec at 60°C. The tensile properties of the cured elastomers and emulsions generally increased with increasing NCO/OH ratio up to 1.6/1.0. With increasing volume fraction of dispersed phase, the maximum stress (tensile strength) decreased, the maximum strain (percent elongation) increased, and the initial modulus (tensile modulus) decreased, in contrast to the behavior of conventional filled polymer systems; however, the maximum stresses were in accord with theoretical values for a filled polymer in which the filler particles bear no load, the initial moduli were in accord with the predictions of an isostrain model, and the maximum strain increased with in-creasing volume fraction of dispersed phase; these unusual variations, which were attributed to the liquid nature of the emulsion droplets, were used to estimate the elastomer proper-ties required to give the desired properties: 60-100 psi maximum stress, 80-150% maximum strain, and 500-2000 psi initial modulus for an 88/12 eutectic salt/crosslinked polybutadi-ene composite containing 20% aluminum particles. The addition of 20% aluminum particles gave a modest improvement in tensile properties, and the addition of 2.5% or 3.5% submicroscopic carbon black particles gave a greater improvement; however, the tensile properties were still slightly short of the desired properties.

Effects of baseline risk information on social and individual choices.

PubMed

Gyrd-Hansen, Dorte; Kristiansen, Ivar Sønbø; Nexøe, Jørgen; Nielsen, Jesper Bo

2002-01-01

This article analyzes preferences for risk reductions in the context of individual and societal decision making. The effect of information on baseline risk is analyzed in both contexts. The results indicate that if individuals are to imagine that they suffer from 1 low-risk and 1 high-risk ailment, and are offered a specified identical absolute risk reduction, a majority will ceteris paribus opt for treatment of the low-risk ailment. A different preference structure is elicited when priority questions are framed as social choices. Here, a majority will prefer to treat the high-risk group of patients. The preference reversal demonstrates the extent to which baseline risk information can influence preferences in different choice settings. It is argued that presentation of baseline risk information may induce framing effects that lead to nonoptimal resource allocations. A solution to this problem may be to not present group-specific baseline risk information when eliciting preferences.

Adolescents' food preferences in china: do household living arrangements matter?

PubMed

Deng, Suo

2011-01-01

Family circumstance has long been considered one important factor that shapes children's eating habits including preferences for particular foods. However, less scholarly efforts have been devoted to understanding children's food preferences in extended family households. Drawn on data from the China Health and Nutrition Survey (CHNS) 2006 (n = 662), this exploratory study compares food preferences of adolescents living in extended families with those residing in nuclear families. T-test results show that adolescents living in extended families (n = 202) had unhealthier food preferences compared with those living in nuclear families (n = 460). They showed more liking for fast food, salted snack food, and sugared drinks, and less liking for vegetables and fruits. Regression results present that controlling for other relevant variables, household structure was significantly associated with adolescents' food preferences (p < .01). These results, albeit exploratory, shed light on possible nutritional education and intervention in the cultural context of China.

Shared cultural knowledge: Effects of music on young children’s social preferences

PubMed Central

Soley, Gaye; Spelke, Elizabeth S.

2016-01-01

Adults use cultural markers to discern the structure of the social landscape. Such markers may also influence the social preferences of young children, who tend to conform to their own group and prefer others who do so. However, the forces that propel these preferences are unknown. Here, we use social preferences based on music to investigate these forces in four- and five-year-old children. First, we establish that children prefer other children whose favorite songs are familiar to them. Then we show that this effect depends on shared knowledge: children both prefer others who know songs they themselves know, and avoid others who know songs they do not know, irrespective of the target children’s liking of the songs. These results suggest that young children have a remarkably selective sensitivity to shared cultural knowledge. Shared knowledge may be a powerful determinant of children’s social preferences, both because it underpins effective communication and because it is conveyed by others through social interactions and therefore can serve as a marker of social group identity. PMID:26773967

Shared cultural knowledge: Effects of music on young children's social preferences.

PubMed

Soley, Gaye; Spelke, Elizabeth S

2016-03-01

Adults use cultural markers to discern the structure of the social landscape. Such markers may also influence the social preferences of young children, who tend to conform to their own group and prefer others who do so. However, the forces that propel these preferences are unknown. Here, we use social preferences based on music to investigate these forces in four- and five-year-old children. First, we establish that children prefer other children whose favorite songs are familiar to them. Then we show that this effect depends on shared knowledge: children both prefer others who know songs they themselves know, and avoid others who know songs they do not know, irrespective of the target children's liking of the songs. These results suggest that young children have a remarkably selective sensitivity to shared cultural knowledge. Shared knowledge may be a powerful determinant of children's social preferences, both because it underpins effective communication and because it is conveyed by others through social interactions and therefore can serve as a marker of social group identity. Copyright © 2015 Elsevier B.V. All rights reserved.

"Shake It Baby, Shake It": Media Preferences, Sexual Attitudes and Gender Stereotypes Among Adolescents.

PubMed

Ter Bogt, Tom F M; Engels, Rutger C M E; Bogers, Sanne; Kloosterman, Monique

2010-12-01

In this study exposure to and preferences for three important youth media (TV, music styles/music TV, internet) were examined in relation to adolescents' permissive sexual attitudes and gender stereotypes (i.e., views of men as sex-driven and tough, and of women as sex objects). Multivariate structural analysis of data from a school-based sample of 480 13 to 16-year-old Dutch students revealed that preferences, rather than exposure were associated with attitudes and stereotypes. For both girls and boys, preferences for hip-hop and hard-house music were associated positively with gender stereotypes and preference for classical music was negatively associated with gender stereotypes. Particularly for boys, using internet to find explicit sexual content emerged as a powerful indicator of all attitudes and stereotypes.

Risk preference shares the psychometric structure of major psychological traits

PubMed Central

Frey, Renato; Pedroni, Andreas; Mata, Rui; Rieskamp, Jörg; Hertwig, Ralph

2017-01-01

To what extent is there a general factor of risk preference, R, akin to g, the general factor of intelligence? Can risk preference be regarded as a stable psychological trait? These conceptual issues persist because few attempts have been made to integrate multiple risk-taking measures, particularly measures from different and largely unrelated measurement traditions (self-reported propensity measures assessing stated preferences, incentivized behavioral measures eliciting revealed preferences, and frequency measures assessing actual risky activities). Adopting a comprehensive psychometric approach (1507 healthy adults completing 39 risk-taking measures, with a subsample of 109 participants completing a retest session after 6 months), we provide a substantive empirical foundation to address these issues, finding that correlations between propensity and behavioral measures were weak. Yet, a general factor of risk preference, R, emerged from stated preferences and generalized to specific and actual real-world risky activities (for example, smoking). Moreover, R proved to be highly reliable across time, indicative of a stable psychological trait. Our findings offer a first step toward a general mapping of the construct risk preference, which encompasses both general and domain-specific components, and have implications for the assessment of risk preference in the laboratory and in the wild. PMID:28983511

Luminescent macrocyclic lanthanide complexes

DOEpatents

Raymond, Kenneth N; Corneillie, Todd M; Xu, Jide

2014-05-20

The present invention provides a novel class of macrocyclic compounds as well as complexes formed between a metal (e.g., lanthanide) ion and the compounds of the invention. Preferred complexes exhibit high stability as well as high quantum yields of lanthanide ion luminescence in aqueous media without the need for secondary activating agents. Preferred compounds incorporate hydroxy-isophthalamide moieties within their macrocyclic structure and are characterized by surprisingly low, non-specific binding to a variety of polypeptides such as antibodies and proteins as well as high kinetic stability. These characteristics distinguish them from known, open-structured ligands.

Analysis of Crystallographic Structure of a Japanese Sword by the Pulsed Neutron Transmission Method

NASA Astrophysics Data System (ADS)

Kino, K.; Ayukawa, N.; Kiyanagi, Y.; Uchida, T.; Uno, S.; Grazzi, F.; Scherillo, A.

We measured two-dimensional transmission spectra of pulsed neutron beams for a Japanese sword sample. Atom density, crystalline size, and preferred orientation of crystals were obtained using the RITS code. The position dependence of the atomic density is consistent with the shape of the sample. The crystalline size is very small and shows position dependence, which is understood by the unique structure of Japanese swords. The preferred orientation has strong position dependence. Our study shows the usefulness of the pulsed neutron transmission method for cultural metal artifacts.

SPS attitude control and stationkeeping: Requirements and tradeoffs

NASA Technical Reports Server (NTRS)

Oglevie, R. E.

1980-01-01

The dominant control requirements of solar power satellites change appreciably relative to small contemporary spacecraft. Trade studies and analyses illustrated preferred control approaches. It was found that the geosynchronous equatorial orbit is preferred over the alternative orbits considered, that the solar pressure orbit perturbation dominates stationkeeping propulsion requirements and that a combined AC and SK system using ion electric propulsion can satisfy the attitude control requirements. It was also found that control system/structural dynamic interaction stability can be obtained through frequency separation with reasonable structural dynamic requirements and simplify spacecraft design.

Policy Effects in Hyperbolic vs. Exponential Models of Consumption and Retirement

PubMed Central

Gustman, Alan L.; Steinmeier, Thomas L.

2012-01-01

This paper constructs a structural retirement model with hyperbolic preferences and uses it to estimate the effect of several potential Social Security policy changes. Estimated effects of policies are compared using two models, one with hyperbolic preferences and one with standard exponential preferences. Sophisticated hyperbolic discounters may accumulate substantial amounts of wealth for retirement. We find it is frequently difficult to distinguish empirically between models with the two types of preferences on the basis of asset accumulation paths or consumption paths around the period of retirement. Simulations suggest that, despite the much higher initial time preference rate, individuals with hyperbolic preferences may actually value a real annuity more than individuals with exponential preferences who have accumulated roughly equal amounts of assets. This appears to be especially true for individuals with relatively high time preference rates or who have low assets for whatever reason. This affects the tradeoff between current benefits and future benefits on which many of the retirement incentives of the Social Security system rest. Simulations involving increasing the early entitlement age and increasing the delayed retirement credit do not show a great deal of difference whether exponential or hyperbolic preferences are used, but simulations for eliminating the earnings test show a non-trivially greater effect when exponential preferences are used. PMID:22711946

Policy Effects in Hyperbolic vs. Exponential Models of Consumption and Retirement.

PubMed

Gustman, Alan L; Steinmeier, Thomas L

2012-06-01

This paper constructs a structural retirement model with hyperbolic preferences and uses it to estimate the effect of several potential Social Security policy changes. Estimated effects of policies are compared using two models, one with hyperbolic preferences and one with standard exponential preferences. Sophisticated hyperbolic discounters may accumulate substantial amounts of wealth for retirement. We find it is frequently difficult to distinguish empirically between models with the two types of preferences on the basis of asset accumulation paths or consumption paths around the period of retirement. Simulations suggest that, despite the much higher initial time preference rate, individuals with hyperbolic preferences may actually value a real annuity more than individuals with exponential preferences who have accumulated roughly equal amounts of assets. This appears to be especially true for individuals with relatively high time preference rates or who have low assets for whatever reason. This affects the tradeoff between current benefits and future benefits on which many of the retirement incentives of the Social Security system rest.Simulations involving increasing the early entitlement age and increasing the delayed retirement credit do not show a great deal of difference whether exponential or hyperbolic preferences are used, but simulations for eliminating the earnings test show a non-trivially greater effect when exponential preferences are used.

Optics and materials research for controlled radiant energy transfer in buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldner, R.B.

1983-11-01

The overall objective of the Tufts research program was to identify and attempt to solve some of the key materials problems associated with practical approaches for achieving controlled radiant energy transfer (CRET) through building windows and envelopes, so as to decrease heating and cooling loads in buildings. Major accomplishments included: the identification of electrochromic (EC)-based structures as the preferred structures for achieving CRET the identification of modulated reflectivity as the preferred mode of operation for EC-based structures demonstration of the feasibility of operating EC-materials in a modulated R(lambda) mode and demonstration of the applicability of free electron model to coloredmore » polycrystalline WO3 films.« less

Organizational Climate: Individual Preferences and Organizational Realities Revisited. Research Report No. 9.

ERIC Educational Resources Information Center

Schneider, Benjamin

In considering the success outcomes associated with a new life insurance agent entering an agency which fits his climate expectations and preferences, data were compiled from 914 of a possible 1,125 respondents. The agents completed an Agency Climate Questionnaire (ACQ) on managerial support, managerial structure, new employee concern,…

The Preferences of University Instructors Regarding Research and Teaching Duties

ERIC Educational Resources Information Center

Kozmina, Ia. Ia.

2015-01-01

The author assesses the preferences of the faculty and teaching staff at Russian universities with regard to their research and teaching duties. She investigates how they structure their work schedule and academic productivity, and how universities with and without special status differ. The study is based on data from two international studies…

Salience Effects: L2 Sentence Production as a Window on L1 Speech Planning

ERIC Educational Resources Information Center

Antón-Méndez, Inés; Gerfen, Chip; Ramos, Miguel

2016-01-01

Salience influences grammatical structure during production in a language-dependent manner because different languages afford different options to satisfy preferences. During production, speakers may always try to satisfy all syntactic encoding preferences (e.g., salient entities to be mentioned early, themes to be assigned the syntactic function…

Factorial Validity of the Vocational Interest Scales of the Holland Vocational Preference Inventory for Australian High School Students.

ERIC Educational Resources Information Center

Athanasou, James A.; And Others

1981-01-01

The structure of the six vocational interests measured by the Holland Vocational Preference Inventory was identified. Results of two separate analyses showed that a general factor accounted for much of the total variance. Remaining bipolar factors supported previous classifications of interests. (Author/GK)

Phonological Constraints on the Assembly of Skeletal Structure in Reading

ERIC Educational Resources Information Center

Marom, Michal; Berent, Iris

2010-01-01

Linguistic research suggests that certain skeletal frames (e.g., CVC) are preferred to others (e.g., VCC). We examine whether such preferences constrain reading in the Stroop task. We demonstrate that CCVC nonwords facilitate naming the color "black" (/blaek/, a CCVC frame) relative to CVC controls. Conversely, CCVC items inhibit "red" (a CVC…

A Model-Based Approach for Visualizing the Dimensional Structure of Ordered Successive Categories Preference Data

ERIC Educational Resources Information Center

DeSarbo, Wayne S.; Park, Joonwook; Scott, Crystal J.

2008-01-01

A cyclical conditional maximum likelihood estimation procedure is developed for the multidimensional unfolding of two- or three-way dominance data (e.g., preference, choice, consideration) measured on ordered successive category rating scales. The technical description of the proposed model and estimation procedure are discussed, as well as the…

Life-Metaphors among Colombian Leadership Students: Core Values and Educational Implications

ERIC Educational Resources Information Center

Hoffman, Edward; Acosta-Orozco, Catalina

2015-01-01

The present study utilized metaphor analysis to explore the core values of Colombian college students in a leadership program. The entire class of 60 students was invited to respond to a structured questionnaire. It asked participants to state their preferred life-metaphor, whether they had always preferred this metaphor since childhood or…

Using multi-scale distribution and movement effects along a montane highway to identify optimal crossing locations for a large-bodied mammal community.

PubMed

Schuster, Richard; Römer, Heinrich; Germain, Ryan R

2013-01-01

Roads are a major cause of habitat fragmentation that can negatively affect many mammal populations. Mitigation measures such as crossing structures are a proposed method to reduce the negative effects of roads on wildlife, but the best methods for determining where such structures should be implemented, and how their effects might differ between species in mammal communities is largely unknown. We investigated the effects of a major highway through south-eastern British Columbia, Canada on several mammal species to determine how the highway may act as a barrier to animal movement, and how species may differ in their crossing-area preferences. We collected track data of eight mammal species across two winters, along both the highway and pre-marked transects, and used a multi-scale modeling approach to determine the scale at which habitat characteristics best predicted preferred crossing sites for each species. We found evidence for a severe barrier effect on all investigated species. Freely-available remotely-sensed habitat landscape data were better than more costly, manually-digitized microhabitat maps in supporting models that identified preferred crossing sites; however, models using both types of data were better yet. Further, in 6 of 8 cases models which incorporated multiple spatial scales were better at predicting preferred crossing sites than models utilizing any single scale. While each species differed in terms of the landscape variables associated with preferred/avoided crossing sites, we used a multi-model inference approach to identify locations along the highway where crossing structures may benefit all of the species considered. By specifically incorporating both highway and off-highway data and predictions we were able to show that landscape context plays an important role for maximizing mitigation measurement efficiency. Our results further highlight the need for mitigation measures along major highways to improve connectivity between mammal populations, and illustrate how multi-scale data can be used to identify preferred crossing sites for different species within a mammal community.

An Amino Acid Code for Irregular and Mixed Protein Packing

PubMed Central

Joo, Hyun; Chavan, Archana; Fraga, Keith; Tsai, Jerry

2015-01-01

To advance our understanding of protein tertiary structure, the development of the knob-socket model is completed in an analysis of the packing in irregular coil and turn secondary structure packing as well as between mixed secondary structure. The knob-socket model simplifies packing based on repeated patterns of 2 motifs: a 3 residue socket for packing within 2° structure and a 4 residue knob-socket for 3° packing. For coil and turn secondary structure, knob-sockets allow identification of a correlation between amino acid composition and tertiary arrangements in space. Coil contributes almost as much as α-helices to tertiary packing. Irregular secondary structure involves 3 residue cliques of consecutive contacting residues or XYZ sockets. In irregular sockets, Gly, Pro, Asp and Ser are favored, while Cys, His, Met and Trp are not. For irregular knobs, the preference order is Arg, Asp, Pro, Asn, Thr, Leu, and Gly, while Cys, His, Met and Trp are not. In mixed packing, the knob amino acid preferences are a function of the socket that they are packing into, whereas the amino acid composition of the sockets does not depend on the secondary structure of the knob. A unique motif of a coil knob with an XYZ β-sheet socket may potentially function to inhibit β-sheet extension. In addition, analysis of the preferred crossing angles for strands within a β-sheet and mixed α-helices/β-sheets identifies canonical packing patterns useful in protein design. Lastly, the knob-socket model abstracts the complexity of protein tertiary structure into an intuitive packing surface topology map. PMID:26370334

Dependence of catalytic properties of Al/Fe2O3 thermites on morphology of Fe2O3 particles in combustion reactions

NASA Astrophysics Data System (ADS)

Zhao, Ningning; He, Cuicui; Liu, Jianbing; Gong, Hujun; An, Ting; Xu, Huixiang; Zhao, Fengqi; Hu, Rongzu; Ma, Haixia; Zhang, Jinzhong

2014-11-01

Three Fe2O3 particle samples with the same crystal structure but different morphologies were prepared by the hydrothermal method and then combined with Al nanoparticles to produce Al/Fe2O3 thermites using ultrasonic mixing. The properties of Fe2O3 and Al/Fe2O3 were studied using a combination of experimental techniques including scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The influences of the three Al/Fe2O3 thermites on the combustion properties of the AP/HTPB (ammonium perchlorate/hydroxyl-terminated polybutadiene) composite propellant were investigated in comparison to those of Fe2O3. The results show that the Al/Fe2O3 thermites are better than Fe2O3 in enhancing the combustion performance of AP/HTPB. Furthermore, the surface area, which depends on size and mophology, of Fe2O3 particles was found to play a vital role in improving the burning rate of the thermites-containing propellant formulation, with the smallest particles with the largest surface-to-volume (S/V) ratio performing the best. The enhanced catalytic property of the granular-shape Fe2O3 and the corresponding thermite is attributed to the large specific surface area of Fe2O3. The different thermal behaviors of these three superthemites were supposed to be attributed to the surface site of Fe2O3 particles. This work provides a better understanding on the catalytic properties of thermites that are important for combustion applications.

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies. Appendix D: EOS configuration design data. Part 1: Spacecraft configuration

NASA Technical Reports Server (NTRS)

1974-01-01

The results of structural studies of the Earth Observatory Satellite (EOS) which define the member sizes to meet the vehicle design requirements are presented. The most significant requirements in sizing the members are the stiffness required to meet the launch vehicle design frequencies both in the late al and in the longitudinal directions. The selected configurations, both baseline and preferred, for the Delta and Titan launch vehicles were evaluated for stiffness requirements. The structural idealization used to estimate the stiffness of each structural arrangement, was based on an evaluation of primary loads paths, effectivity of structural members, and estimated sizes for the preferred configurations. The study included an evaluation of the following structural materials: (1) aluminum alloys, (2) titanium alloys, (3) beryllium, (4) beryllium/aluminum alloy, and (5) composite materials.

“Shake It Baby, Shake It”: Media Preferences, Sexual Attitudes and Gender Stereotypes Among Adolescents

PubMed Central

Engels, Rutger C. M. E.; Bogers, Sanne; Kloosterman, Monique

2010-01-01

In this study exposure to and preferences for three important youth media (TV, music styles/music TV, internet) were examined in relation to adolescents’ permissive sexual attitudes and gender stereotypes (i.e., views of men as sex-driven and tough, and of women as sex objects). Multivariate structural analysis of data from a school-based sample of 480 13 to 16-year-old Dutch students revealed that preferences, rather than exposure were associated with attitudes and stereotypes. For both girls and boys, preferences for hip-hop and hard-house music were associated positively with gender stereotypes and preference for classical music was negatively associated with gender stereotypes. Particularly for boys, using internet to find explicit sexual content emerged as a powerful indicator of all attitudes and stereotypes. PMID:21212809

Dietary triglycerides act on mesolimbic structures to regulate the rewarding and motivational aspects of feeding

PubMed Central

Cansell, Céline; Castel, Julien; Denis, Raphaël G. P.; Rouch, Claude; Delbes, Anne-Sophie; Martinez, Sarah; Mestivier, Denis; Finan, Brian; Maldonado-Aviles, Jaime G.; Rijnsburger, Merel; Tschöp, Matthias H.; DiLeone, Ralph J.; Eckel, Robert H.; la Fleur, Susanne E.; Magnan, Christophe; Hnasko, Thomas S.; Luquet, Serge

2014-01-01

Circulating triglycerides (TG) normally increase after a meal but are altered in pathophysiological conditions such as obesity. Although TG metabolism in the brain remains poorly understood, several brain structures express enzymes that process TG-enriched particles, including mesolimbic structures. For this reason, and because consumption of high fat diet alters dopamine signaling, we tested the hypothesis that TG might directly target mesolimbic reward circuits to control reward-seeking behaviors. We found that the delivery of small amounts of TG to the brain through the carotid artery rapidly reduced both spontaneous and amphetamine-induced locomotion, abolished preference for palatable food, and reduced the motivation to engage in food-seeking behavior. Conversely, targeted disruption of the TG-hydrolyzing enzyme lipoprotein lipase specifically in the nucleus accumbens increased palatable food preference and food seeking behavior. Finally, prolonged TG perfusion resulted in a return to normal palatable food preference despite continued locomotor suppression, suggesting that adaptive mechanisms occur. These findings reveal new mechanisms by which dietary fat may alter mesolimbic circuit function and reward seeking. PMID:24732670

Stair evacuation simulation based on cellular automata considering evacuees’ walk preferences

NASA Astrophysics Data System (ADS)

Ding, Ning; Zhang, Hui; Chen, Tao; Peter, B. Luh

2015-06-01

As a physical model, the cellular automata (CA) model is widely used in many areas, such as stair evacuation. However, existing CA models do not consider evacuees’ walk preferences nor psychological status, and the structure of the basic model is unapplicable for the stair structure. This paper is to improve the stair evacuation simulation by addressing these issues, and a new cellular automata model is established. Several evacuees’ walk preference and how evacuee’s psychology influences their behaviors are introduced into this model. Evacuees’ speeds will be influenced by these features. To validate this simulation, two fire drills held in two high-rise buildings are video-recorded. It is found that the simulation results are similar to the fire drill results. The structure of this model is simple, and it is easy to further develop and utilize in different buildings with various kinds of occupants. Project supported by the National Basic Research Program of China (Grant No. 2012CB719705) and the National Natural Science Foundation of China (Grant Nos. 91224008, 91024032, and 71373139).

Preferred Visuographic Images to Support Reading by People with Chronic Aphasia.

PubMed

Knollman-Porter, Kelly; Brown, Jessica; Hux, Karen; Wallace, Sarah E; Uchtman, Elizabeth

2016-08-01

Written materials used both clinically and in everyday reading tasks can contain visuographic images that vary in content and attributes. People with aphasia may benefit from visuographic images to support reading comprehension. Understanding the image type and feature preferences of individuals with aphasia is an important first step when developing guidelines for selecting reading materials that motivate and support reading comprehension. The study purposes were to determine the preferences and explore the perceptions of and opinions provided by adults with chronic aphasia regarding various image features and types on facilitating the reading process. Six adults with chronic aphasia ranked visuographic materials varying in context, engagement, and content regarding their perceived degree of helpfulness in comprehending written materials. Then, they participated in semi-structured interviews that allowed them to elaborate on their choices and convey opinions about potential benefits and detriments associated with preferred and non-preferred materials. All participants preferred high-context photographs rather than iconic images or portraits as potential supports to facilitate reading activities. Differences in opinions emerged across participants regarding the amount of preferred content included in high context images.

Temporal Constraint Reasoning With Preferences

NASA Technical Reports Server (NTRS)

Khatib, Lina; Morris, Paul; Morris, Robert; Rossi, Francesca

2001-01-01

A number of reasoning problems involving the manipulation of temporal information can naturally be viewed as implicitly inducing an ordering of potential local decisions involving time (specifically, associated with durations or orderings of events) on the basis of preferences. For example. a pair of events might be constrained to occur in a certain order, and, in addition. it might be preferable that the delay between them be as large, or as small, as possible. This paper explores problems in which a set of temporal constraints is specified, where each constraint is associated with preference criteria for making local decisions about the events involved in the constraint, and a reasoner must infer a complete solution to the problem such that, to the extent possible, these local preferences are met in the best way. A constraint framework for reasoning about time is generalized to allow for preferences over event distances and durations, and we study the complexity of solving problems in the resulting formalism. It is shown that while in general such problems are NP-hard, some restrictions on the shape of the preference functions, and on the structure of the preference set, can be enforced to achieve tractability. In these cases, a simple generalization of a single-source shortest path algorithm can be used to compute a globally preferred solution in polynomial time.

Son preference in rural China: patrilineal families and socioeconomic change.

PubMed

Murphy, Rachel; Tao, Ran; Lu, Xi

2011-01-01

This article draws on a survey conducted in six provinces in summer 2008 to investigate the determinants of son preference in rural China. The analysis confirms the conventional wisdom that son preference is embedded within patrilineal family structures and practices. We extend our analysis by exploring specific aspects of variation within patrilineal family culture. We find that the patrilineal group (clan) composition of villages and family participation in practices such as building ancestral halls and updating genealogies significantly influence son preference. Yet even though son preference is embedded within patrilineal family culture, our analysis suggests that over time the attenuation of son preference is likely. This is because determinants associated with socioeconomic change—for instance, higher levels of education, direct exposure to official policy education materials, higher income (a proxy for rural industrialization), and agricultural mechanization—all attenuate son preference. Being younger and female are also associated with weaker son preference, and both characteristics are likely to interact with education and industrialization to further dilute son preference in the longer term. Nevertheless, our findings suggest that concerted efforts are needed to ameliorate institutional discrimination against rural people in welfare provisioning and in labor markets, and to promote multiple dimensions of gender equality, including in land rights, wage rates, and education.

Distinctive Klf4 mutants determine preference for DNA methylation status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hashimoto, Hideharu; Wang, Dongxue; Steves, Alyse N.

Reprogramming of mammalian genome methylation is critically important but poorly understood. Klf4, a transcription factor directing reprogramming, contains a DNA binding domain with three consecutive C2H2 zinc fingers. Klf4 recognizes CpG or TpG within a specific sequence. Mouse Klf4 DNA binding domain has roughly equal affinity for methylated CpG or TpG, and slightly lower affinity for unmodified CpG. The structural basis for this key preference is unclear, though the side chain of Glu446 is known to contact the methyl group of 5-methylcytosine (5mC) or thymine (5-methyluracil). We examined the role of Glu446 by mutagenesis. Substituting Glu446 with aspartate (E446D) resultedmore » in preference for unmodified cytosine, due to decreased affinity for 5mC. In contrast, substituting Glu446 with proline (E446P) increased affinity for 5mC by two orders of magnitude. Structural analysis revealed hydrophobic interaction between the proline's aliphatic cyclic structure and the 5-methyl group of the pyrimidine (5mC or T). As in wild-type Klf4 (E446), the proline at position 446 does not interact directly with either the 5mC N4 nitrogen or the thymine O4 oxygen. In contrast, the unmethylated cytosine's exocyclic N4 amino group (NH2) and its ring carbon C5 atom hydrogen bond directly with the aspartate carboxylate of the E446D variant. Both of these interactions would provide a preference for cytosine over thymine, and the latter one could explain the E446D preference for unmethylated cytosine. Finally, we evaluated the ability of these Klf4 mutants to regulate transcription of methylated and unmethylated promoters in a luciferase reporter assay.« less

Paths to Bullying in Online Gaming: The Effects of Gender, Preference for Playing Violent Games, Hostility, and Aggressive Behavior on Bullying

ERIC Educational Resources Information Center

Yang, Shu Ching

2012-01-01

This study examined a sample of adolescent online game players and explored the relationships between their gender, preference for video games (VG), hostility, aggressive behavior, experiences of cyberbullying, and victimization. The path relationships among the variables were further validated with structure equation modeling. Among the…

Differences between Mobile Learning Environmental Preferences of High School Teachers and Students in Taiwan: A Structural Equation Model Analysis

ERIC Educational Resources Information Center

Lai, Chiu-Lin; Hwang, Gwo-Jen; Liang, Jyh-Chong; Tsai, Chin-Chung

2016-01-01

Mobile technology has been increasingly applied to educational settings in the past decade. Although researchers have attempted to investigate both students' and teachers' preferences regarding mobile learning, few studies have investigated the differences between the two, an understanding of which is important for developing effective mobile…

Self-Directed Learning Readiness, Internet Self-Efficacy and Preferences towards Constructivist Internet-Based Learning Environments among Higher-Aged Adults

ERIC Educational Resources Information Center

Chu, R. J-C.; Tsai, C-C.

2009-01-01

This article examines several research questions to establish a theory model for explaining factors that influence adult learners' preferences for constructivist Internet-based learning environments (CILE). Data were gathered from 541 individual participants enrolled in adult education institutes in Taiwan for structural equation modelling (SEM)…

Value Preferences Predicting Narcissistic Personality Traits in Young Adults

ERIC Educational Resources Information Center

Gungor, Ibrahim Halil; Eksi, Halil; Aricak, Osman Tolga

2012-01-01

This study aimed at showing how the value preferences of young adults could predict the narcissistic characteristics of young adults according to structural equation modeling. 133 female (59.6%) and 90 male (40.4%), total 223 young adults participated the study (average age: 25.66, ranging from 20 to 38). Ratio group sampling method was used while…

Life-Metaphors among Colombian Medical Students: Uncovering Core Values and Educational Implications

ERIC Educational Resources Information Center

Hoffman, Edward; Acosta-Orozco, Catalina; Compton, William C.

2015-01-01

The present study utilized metaphor analysis to examine the core values of Colombian medical students. The entire 9th semester medical class of 60 students was invited to respond to a structured questionnaire. It asked participants to state their preferred life-metaphor, whether they had always preferred this metaphor since childhood or…

The Supreme Court, Civil Rights, and Preference Policies: Judicial Decision Making Processes in the United States and India.

ERIC Educational Resources Information Center

Parikh, Sunita

1990-01-01

Presents a comparative analysis of the U.S. and Indian Supreme Courts' roles in civil rights and preference policies. Despite structural and historical differences, similarities exist in the development of such policies. Both are more concerned with fidelity to constitutional and statutory interpretations than to personal ideological viewpoints.…

Green roof systems: a study of public attitudes and preferences in southern Spain.

PubMed

Fernandez-Cañero, Rafael; Emilsson, Tobias; Fernandez-Barba, Carolina; Herrera Machuca, Miguel Ángel

2013-10-15

This study investigates people's preconceptions of green roofs and their visual preference for different green roof design alternatives in relation to behavioral, social and demographical variables. The investigation was performed as a visual preference study using digital images created to represent eight different alternatives: gravel roof, extensive green roof with Sedums not in flower, extensive green roof with sedums in bloom, semi-intensive green roof with sedums and ornamental grasses, semi-intensive green roof with shrubs, intensive green roof planted with a lawn, intensive green roof with succulent and trees and intensive green roof with shrubs and trees. Using a Likert-type scale, 450 respondents were asked to indicate their preference for each digital image. Results indicated that respondents' sociodemographic characteristics and childhood environmental background influenced their preferences toward different green roof types. Results also showed that green roofs with a more careful design, greater variety of vegetation structure, and more variety of colors were preferred over alternatives. Copyright © 2013 Elsevier Ltd. All rights reserved.

Predicting Human Preferences Using the Block Structure of Complex Social Networks

PubMed Central

Guimerà, Roger; Llorente, Alejandro; Moro, Esteban; Sales-Pardo, Marta

2012-01-01

With ever-increasing available data, predicting individuals' preferences and helping them locate the most relevant information has become a pressing need. Understanding and predicting preferences is also important from a fundamental point of view, as part of what has been called a “new” computational social science. Here, we propose a novel approach based on stochastic block models, which have been developed by sociologists as plausible models of complex networks of social interactions. Our model is in the spirit of predicting individuals' preferences based on the preferences of others but, rather than fitting a particular model, we rely on a Bayesian approach that samples over the ensemble of all possible models. We show that our approach is considerably more accurate than leading recommender algorithms, with major relative improvements between 38% and 99% over industry-level algorithms. Besides, our approach sheds light on decision-making processes by identifying groups of individuals that have consistently similar preferences, and enabling the analysis of the characteristics of those groups. PMID:22984533

Is it the music? Peer substance use as a mediator of the link between music preferences and adolescent substance use.

PubMed

Mulder, Juul; Ter Bogt, Tom F M; Raaijmakers, Quinten A W; Nic Gabhainn, Saoirse; Monshouwer, Karin; Vollebergh, Wilma A M

2010-06-01

Both music preferences and the substance use behavior of peers are important elements in explaining adolescent substance use. The extent to which music preference and peer use overlap in explaining adolescent substance use remains to be determined. A nationally representative sample of 7324 Dutch school-going adolescents (aged 12-16) provided data on music preferences, substance use behaviors and perceived number of peers using substances. Factor analyses showed that preferences for eight music genres factored into four styles: Pop (chart music, Dutch pop), Adult (classical music, jazz), Urban (rap/hiphop, soul/R&B) and Hard (punk/hardcore, techno/hardhouse); substance use was indicated by smoking, drinking, and cannabis use. Structural equation modeling revealed that the relationship between music preference and substance use was either wholly or partially mediated by perceived peer use. Music can model substance use and fans of different types of music may select friends with use patterns that reinforce their own substance use inclinations.

Nanoscale mass conveyors

DOEpatents

Regan, Brian C [Oakland, CA; Aloni, Shaul [Albany, CA; Zettl, Alexander K [Kensington, CA

2008-03-11

A mass transport method and device for individually delivering chargeable atoms or molecules from source particles is disclosed. It comprises a channel; at least one source particle of chargeable material fixed to the surface of the channel at a position along its length; a means of heating the channel; and a means for applying an controllable electric field along the channel, whereby the device transports the atoms or molecules along the channel in response to applied electric field. In a preferred embodiment, the mass transport device will comprise a multiwalled carbon nanotube (MWNT), although other one dimensional structures may also be used. The MWNT or other structure acts as a channel for individual or small collections of atoms due to the atomic smoothness of the material. Also preferred is a source particle of a metal such as indium. The particles move by dissociation into small units, in some cases, individual atoms. The particles are preferably less than 100 nm in size.

Site preference and compensation behavior in Co(Cr, Mn){sub 2}O{sub 4} system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, H. G.; College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124; Wang, Z.

Site preference of doped Mn ions in CoCr{sub 2−x}Mn{sub x}O{sub 4} (x = 0–2) series has been derived separately from structure and magnetic measurement. It shows that parts of the doped Mn ions occupy the A (Co) sites when x < 0.5. And then, it takes the two B (Cr) sites in turn before and after x = 1.3. This site preference behavior results in a role conversion of the magnetic contributors and, thus, leads to the composition dependent magnetic compensation. Temperature induced compensation and negative magnetization have also been found in several samples, which is attributed to the large energy barrier between the ferromagnetic andmore » antiferromagnetic spin arrangement. A structure transition from cubic to tetragonal symmetry has been detected.« less

Radial/axial power divider/combiner

NASA Technical Reports Server (NTRS)

Vaddiparty, Yerriah P. (Inventor)

1987-01-01

An electromagnetic power divider/combiner comprises N radial outputs (31) having equal powers and preferably equal phases, and a single axial output (20). A divider structure (1) and a preferably identical combiner structure (2) are broadside coupled across a dielectric substrate (30) containing on one side the network of N radial outputs (31) and on its other side a set of N equispaced stubs (42) which are capacitively coupled through the dielectric substrate (30) to the N radial outputs (31). The divider structure (1) and the combiner structure (2) each comprise a dielectric disk (12, 22, respectively) on which is mounted a set of N radial impedance transformers (14, 24, respectively). Gross axial coupling is determined by the thickness of the dielectric layer (30). Rotating the disks (12, 22) with respect to each other effectuates fine adjustment in the degree of axial coupling.

Housing for persons with serious mental illness: consumer and service provider preferences.

PubMed

Piat, Myra; Lesage, Alain; Boyer, Richard; Dorvil, Henri; Couture, Audrey; Grenier, Guy; Bloom, David

2008-09-01

This study evaluated the housing preferences of a representative sample of consumers with serious mental illness living in seven types of housing in Montreal, Quebec, and compared these with their case managers' housing preferences for them. An inventory of all housing for this population was developed in consultation with administrators of three psychiatric hospitals and the regional health board. The inventory included seven categories: housing in a hospital setting, hostels, group homes, foster homes, supervised apartments, social housing (low-income housing or cooperative), and private rooming homes. A stratified random sample of 48 consumers was selected in each category. In all, 315 consumers and their case managers completed the Consumer Housing Preference Survey. Most consumers preferred living in housing that offered them more autonomy than the housing in which they were currently living. Case managers preferred housing that offered some structure, such as supervised apartments. Forty-four percent of consumers preferred to live in their own apartment. More than a third of consumers preferred to live in their current housing. When evaluating housing preferences, it is important to elicit the viewpoints of mental health consumers as well as their case managers. Special attention should be given to the type of housing where consumers currently live. A variety of housing, not just autonomous housing, is needed to meet the specific housing preferences of individuals with serious mental illness.

Strategies used by parents to influence their children's food preferences.

PubMed

Russell, Catherine G; Worsley, Anthony; Campbell, Karen J

2015-07-01

Food preferences are important determinants of children's food intakes. Parental feeding behaviours have a significant influence on the development of children's food preferences. The aim of the present study was to describe the ways in which parents attempt to influence their children's food preferences. Parents of 2-5 year old children participated in semi-structured qualitative interviews, which were transcribed and content analysed using a thematic coding manual. The parents described the ways in which they tried to influence the foods their child liked and disliked. Participants (N = 57) were separated into three separate groups based on an a priori study measuring food preferences and food neophobia: those who either had children with healthy food preferences (i.e. closely aligned with dietary guidelines) (N = 20), or unhealthy food preferences (i.e. not closely aligned with dietary guidelines) (N = 18), or high levels of food neophobia (N = 19). The parents used many, diverse behaviours to influence their child's food preferences. Some of these behaviours were likely to be effective in promoting healthy food preferences in children (e.g. parental modelling, food exposure), whilst others were likely to be ineffective (e.g. forcing consumption, restricting food access). Parents of children with healthy food preferences appeared to use more of the feeding behaviours predicted to promote healthy preferences than parents in the other two groups. Parents of children with unhealthy food preferences and those of food neophobic children appeared to rely more on ineffective behaviours. Parents used a mixture of effective and ineffective behaviours, with parents of children with unhealthy food preferences or high food neophobia using fewer behaviours known to be effective. Interventions aimed at influencing parental feeding behaviours should include those behaviours targeted at children's food preferences. Copyright © 2015 Elsevier Ltd. All rights reserved.

Global universe anisotropy probed by the alignment of structures in the cosmic microwave background.

PubMed

Wiaux, Y; Vielva, P; Martínez-González, E; Vandergheynst, P

2006-04-21

We question the global universe isotropy by probing the alignment of local structures in the cosmic microwave background (CMB) radiation. The original method proposed relies on a steerable wavelet decomposition of the CMB signal on the sphere. The analysis of the first-year Wilkinson Microwave Anisotropy Probe data identifies a mean preferred plane with a normal direction close to the CMB dipole axis, and a mean preferred direction in this plane, very close to the ecliptic poles axis. Previous statistical anisotropy results are thereby synthesized, but further analyses are still required to establish their origin.

Patient or physician preferences for decision analysis: the prenatal genetic testing decision.

PubMed

Heckerling, P S; Verp, M S; Albert, N

1999-01-01

The choice between amniocentesis and chorionic villus sampling for prenatal genetic testing involves tradeoffs of the benefits and risks of the tests. Decision analysis is a method of explicitly weighing such tradeoffs. The authors examined the relationship between prenatal test choices made by patients and the choices prescribed by decision-analytic models based on their preferences, and separate models based on the preferences of their physicians. Preferences were assessed using written scenarios describing prenatal testing outcomes, and were recorded on linear rating scales. After adjustment for sociodemographic and obstetric confounders, test choice was significantly associated with the choice of decision models based on patient preferences (odds ratio 4.44; Cl, 2.53 to 7.78), but not with the choice of models based on the preferences of the physicians (odds ratio 1.60; Cl, 0.79 to 3.26). Agreement between decision analyses based on patient preferences and on physician preferences was little better than chance (kappa = 0.085+/-0.063). These results were robust both to changes in the decision-analytic probabilities and to changes in the model structure itself to simulate non-expected utility decision rules. The authors conclude that patient but not physician preferences, incorporated in decision models, correspond to the choice of amniocentesis or chorionic villus sampling made by the patient. Nevertheless, because patient preferences were assessed after referral for genetic testing, prospective preference-assessment studies will be necessary to confirm this association.

Do patients and health care providers have discordant preferences about which aspects of treatments matter most? Evidence from a systematic review of discrete choice experiments.

PubMed

Harrison, Mark; Milbers, Katherine; Hudson, Marie; Bansback, Nick

2017-05-17

To review studies eliciting patient and healthcare provider preferences for healthcare interventions using discrete choice experiments (DCEs) to (1) review the methodology to evaluate similarities, differences, rigour of designs and whether comparisons are made at the aggregate level or account for individual heterogeneity; and (2) quantify the extent to which they demonstrate concordance of patient and healthcare provider preferences. A systematic review searching Medline, EMBASE, Econlit, PsycINFO and Web of Science for DCEs using patient and healthcare providers. peer-reviewed; complete empiric text in English from 1995 to 31July 2015; discussing a healthcare-related topic; DCE methodology; comparing patients and healthcare providers. Systematic review. We identified 38 papers exploring 16 interventions in 26 diseases/indications. Methods to analyse results, determine concordance between patient and physician values, and explore heterogeneity varied considerably between studies. The majority of studies we reviewed found more evidence of mixed concordance and discordance (n=28) or discordance of patient and healthcare provider preferences (n=12) than of concordant preferences (n=4). A synthesis of concordance suggested that healthcare providers rank structure and outcome attributes more highly than patients, while patients rank process attributes more highly than healthcare providers. Discordant patient and healthcare provider preferences for different attributes of healthcare interventions are common. Concordance varies according to whether attributes are processes, structures or outcomes, and therefore determining preference concordance should consider all aspects jointly and not a binary outcome. DCE studies provide excellent opportunities to assess value concordance between patients and providers, but assessment of concordance was limited by a lack of consistency in the approaches used and consideration of heterogeneity of preferences. Future DCEs assessing concordance should fully report the framing of the questions and investigate the heterogeneity of preferences within groups and how these compare. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Neural basis of preference for human social hierarchy versus egalitarianism.

PubMed

Chiao, Joan Y; Mathur, Vani A; Harada, Tokiko; Lipke, Trixie

2009-06-01

A fundamental way that individuals differ is in the degree to which they prefer social dominance hierarchy over egalitarianism as a guiding principle of societal structure, a phenomenon known as social dominance orientation. Here we show that preference for hierarchical rather than egalitarian social relations varies as a function of neural responses within left anterior insula and anterior cingulate cortices. Our findings provide novel evidence that preference for social dominance hierarchy is associated with neural functioning within brain regions that are associated with the ability to share and feel concern for the pain of others; this suggests a neurobiological basis for social and political attitudes. Implications of these findings for research on the social neuroscience of fairness, justice, and intergroup relations are discussed.

Preference Mining Using Neighborhood Rough Set Model on Two Universes.

PubMed

Zeng, Kai

2016-01-01

Preference mining plays an important role in e-commerce and video websites for enhancing user satisfaction and loyalty. Some classical methods are not available for the cold-start problem when the user or the item is new. In this paper, we propose a new model, called parametric neighborhood rough set on two universes (NRSTU), to describe the user and item data structures. Furthermore, the neighborhood lower approximation operator is used for defining the preference rules. Then, we provide the means for recommending items to users by using these rules. Finally, we give an experimental example to show the details of NRSTU-based preference mining for cold-start problem. The parameters of the model are also discussed. The experimental results show that the proposed method presents an effective solution for preference mining. In particular, NRSTU improves the recommendation accuracy by about 19% compared to the traditional method.

Enhancing thermal conductivity of fluids with graphite nanoparticles and carbon nanotube

DOEpatents

Zhang, Zhiqiang [Lexington, KY; Lockwood, Frances E [Georgetown, KY

2008-03-25

A fluid media such as oil or water, and a selected effective amount of carbon nanomaterials necessary to enhance the thermal conductivity of the fluid. One of the preferred carbon nanomaterials is a high thermal conductivity graphite, exceeding that of the neat fluid to be dispersed therein in thermal conductivity, and ground, milled, or naturally prepared with mean particle size less than 500 nm, and preferably less than 200 nm, and most preferably less than 100 nm. The graphite is dispersed in the fluid by one or more of various methods, including ultrasonication, milling, and chemical dispersion. Carbon nanotubes with graphitic structure is another preferred source of carbon nanomaterial, although other carbon nanomaterials are acceptable. To confer long term stability, the use of one or more chemical dispersants is preferred. The thermal conductivity enhancement, compared to the fluid without carbon nanomaterial, is proportional to the amount of carbon nanomaterials (carbon nanotubes and/or graphite) added.

Antecedents of intra/intergroup friendships and stress levels among ethnic and religious minority members.

PubMed

Zagefka, Hanna; Mohamed, Abdinasir; Mursi, Gehad; Lay, Siugmin

2016-12-01

Two studies tested a model, whereby, identification with the minority group was predicted to impact on acculturation preferences, which in turn were proposed to impact involvement in intragroup friendships with other minority members, intergroup friendships with majority members and stress experienced by minority members. A direct path from minority identification to stress was also included in the model. The model was tested using structural equation modelling on survey data collected from Muslim women (N = 250) and from Somali minority members (N = 198) in Britain. Results supported predictions and revealed that identification was associated with more culture maintenance preference and less culture adoption preference. Culture maintenance preference was associated with involvement in intragroup friendships, and culture adoption preference was associated with involvement in intergroup friendships and increased stress. Practical applications of the findings are discussed. © 2015 International Union of Psychological Science.

Physical activity and neuropsychiatric symptoms of Parkinson disease.

PubMed

Abrantes, Ana M; Friedman, Joseph H; Brown, Richard A; Strong, David R; Desaulniers, Julie; Ing, Eileen; Saritelli, Jennifer; Riebe, Deborah

2012-09-01

Neuropsychiatric symptoms of Parkinson disease (PD) such as fatigue, depression, and apathy are common and detract from quality of life. There is little published on the impact of physical activity on the neuropsychiatric symptoms of PD. A convenience sample of 45 patients with PD (mean age = 66.1 years; 33% female) completed questionnaires on physical activity, neuropsychiatric symptoms, and specific exercise preferences. Covarying for age and gender, higher levels of physical activity were associated with significantly less fatigue, as well as a trend for less apathy and depression and greater positive affect. Exercise preferences included moderate intensity (73%), at home (56%), in the morning (73%), scheduled (69%), options for varied activities (73%), and preference for both structured/supervised (50%), and unsupervised/self-paced (50%) programs. Preferred activities included the use of aerobic exercise equipment, resistance training, and yoga. Developing and tailoring exercise programs that incorporate specific preferences may result in more effective interventions for patients with PD.

Kinetic and thermodynamic framework for P4-P6 RNA reveals tertiary motif modularity and modulation of the folding preferred pathway

PubMed Central

Bisaria, Namita; Greenfeld, Max; Limouse, Charles; Pavlichin, Dmitri S.; Mabuchi, Hideo; Herschlag, Daniel

2016-01-01

The past decade has seen a wealth of 3D structural information about complex structured RNAs and identification of functional intermediates. Nevertheless, developing a complete and predictive understanding of the folding and function of these RNAs in biology will require connection of individual rate and equilibrium constants to structural changes that occur in individual folding steps and further relating these steps to the properties and behavior of isolated, simplified systems. To accomplish these goals we used the considerable structural knowledge of the folded, unfolded, and intermediate states of P4-P6 RNA. We enumerated structural states and possible folding transitions and determined rate and equilibrium constants for the transitions between these states using single-molecule FRET with a series of mutant P4-P6 variants. Comparisons with simplified constructs containing an isolated tertiary contact suggest that a given tertiary interaction has a stereotyped rate for breaking that may help identify structural transitions within complex RNAs and simplify the prediction of folding kinetics and thermodynamics for structured RNAs from their parts. The preferred folding pathway involves initial formation of the proximal tertiary contact. However, this preference was only ∼10 fold and could be reversed by a single point mutation, indicating that a model akin to a protein-folding contact order model will not suffice to describe RNA folding. Instead, our results suggest a strong analogy with a modified RNA diffusion-collision model in which tertiary elements within preformed secondary structures collide, with the success of these collisions dependent on whether the tertiary elements are in their rare binding-competent conformations. PMID:27493222

Decision-making in irrigation networks: Selecting appropriate canal structures using multi-attribute decision analysis.

PubMed

Hosseinzade, Zeinab; Pagsuyoin, Sheree A; Ponnambalam, Kumaraswamy; Monem, Mohammad J

2017-12-01

The stiff competition for water between agriculture and non-agricultural production sectors makes it necessary to have effective management of irrigation networks in farms. However, the process of selecting flow control structures in irrigation networks is highly complex and involves different levels of decision makers. In this paper, we apply multi-attribute decision making (MADM) methodology to develop a decision analysis (DA) framework for evaluating, ranking and selecting check and intake structures for irrigation canals. The DA framework consists of identifying relevant attributes for canal structures, developing a robust scoring system for alternatives, identifying a procedure for data quality control, and identifying a MADM model for the decision analysis. An application is illustrated through an analysis for automation purposes of the Qazvin irrigation network, one of the oldest and most complex irrigation networks in Iran. A survey questionnaire designed based on the decision framework was distributed to experts, managers, and operators of the Qazvin network and to experts from the Ministry of Power in Iran. Five check structures and four intake structures were evaluated. A decision matrix was generated from the average scores collected from the survey, and was subsequently solved using TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) method. To identify the most critical structure attributes for the selection process, optimal attribute weights were calculated using Entropy method. For check structures, results show that the duckbill weir is the preferred structure while the pivot weir is the least preferred. Use of the duckbill weir can potentially address the problem with existing Amil gates where manual intervention is required to regulate water levels during periods of flow extremes. For intake structures, the Neyrpic® gate and constant head orifice are the most and least preferred alternatives, respectively. Some advantages of the Neyrpic® gate are ease of operation and capacity to measure discharge flows. Overall, the application to the Qazvin irrigation network demonstrates the utility of the proposed DA framework in selecting appropriate structures for regulating water flows in irrigation canals. This framework systematically aids the decision process by capturing decisions made at various levels (individual farmers to high-level management). It can be applied to other cases where a new irrigation network is being designed, or where changes in irrigation structures need to be identified to improve flow control in existing networks. Copyright © 2017 Elsevier B.V. All rights reserved.

Development and implementation of a visual card-sorting technique for assessing food and activity preferences and patterns in African American girls.

PubMed

Sherwood, Nancy E; Story, Mary; Neumark-Sztainer, Dianne; Adkins, Sarah; Davis, Marsha

2003-11-01

Card-sorting tasks for assessing food and activity preferences and patterns among African American girls were developed. Associations among food preference and intake frequency, activity preference and frequency, and body mass index were examined. Participants completed newly developed card-sorting tasks assessing food and activity preferences and patterns. Height and weight were measured. Ninety-six 8- to 10-year-old African American girls from schools and community centers in Minneapolis-St. Paul. Preference and frequency data for 64 foods/beverages and 34 activities. Frequencies for food and activity preference and frequency categories were computed. Pearson correlations among food and activity preference, frequency, and body mass index were computed. High-sugar (eg, fruit drinks, soda) and/or high-fat (eg, ice cream, cookies) foods were among the most popular and frequently consumed. Ninety-six percent of girls liked fruit drinks, with 35% consuming them "almost every day." Less-structured activities such as biking, games, jump rope, and dance were most popular. Biking was preferred by 85% of girls, with 48% biking "almost every day." Food preference and frequency categories were moderately correlated (r=0.30 to 0.58), as were activity preference and frequency (r=0.37 to 0.49). The card-sorting tasks are useful tools for assessing food and activity preferences and patterns in girls. Obesity prevention programs for African American girls should include preferred activities such as dance, jump rope, and active play. Programs may also benefit from a focus on replacing high fat/high sugar snacks and sweetened beverages with low-fat, lower-calorie snacks and beverages (eg, fruit, vegetables, water).

Monetary Valuations of University Course Delivery: The Case for Face-to-Face Learning Activities in Accounting Education

ERIC Educational Resources Information Center

Taplin, Ross; Kerr, Rosy; Brown, Alistair

2017-01-01

Student preferences for delivery options were obtained within a monetary framework by asking students to purchase their ideal course structure. Results show that accounting students prefer to spend more on tutorials but purchase less lecture time; the difference due to the higher cost of tutorials compared to lectures. Face-to-face classes were…

Coupling mesodomain positional ordering to intra-domain orientational ordering in block copolymer assembly

NASA Astrophysics Data System (ADS)

Burke, Christopher; Reddy, Abhiram; Prasad, Ishan; Grason, Gregory

Block copolymer (BCP) melts form a number of symmetric microphases, e.g. columnar or double gyroid phases. BCPs with a block composed of chiral monomers are observed to form bulk phases with broken chiral symmetry e.g. a phase of hexagonally ordered helical mesodomains. Other new structures may be possible, e.g. double gyroid with preferred chirality which has potential photonic applications. One approach to understanding chirality transfer from monomer to the bulk is to use self consistent field theory (SCFT) and incorporate an orientational order parameter with a preference for handed twist in chiral block segments, much like the texture of cholesteric liquid crystal. Polymer chains in achiral BCPs exhibit orientational ordering which couples to the microphase geometry; a spontaneous preference for ordering may have an effect on the geometry. The influence of a preference for chiral polar (vectorial) segment order has been studied to some extent, though the influence of coupling to chiral tensorial (nematic) order has not yet been developed. We present a computational approach using SCFT with vector and tensor order which employs well developed pseudo-spectral methods. Using this we explore how tensor order influences which structures form, and if it can promote chiral phases.

Children’s looking preference for biological motion may be related to an affinity for mathematical chaos

PubMed Central

Haworth, Joshua L.; Kyvelidou, Anastasia; Fisher, Wayne; Stergiou, Nicholas

2015-01-01

Recognition of biological motion is pervasive in early child development. Further, viewing the movement behavior of others is a primary component of a child’s acquisition of complex, robust movement repertoires, through imitation and real-time coordinated action. We theorize that inherent to biological movements are particular qualities of mathematical chaos and complexity. We further posit that this character affords the rich and complex inter-dynamics throughout early motor development. Specifically, we explored whether children’s preference for biological motion may be related to an affinity for mathematical chaos. Cross recurrence quantification analysis (cRQA) was used to investigate the coordination of gaze and posture with various temporal structures (periodic, chaotic, and aperiodic) of the motion of an oscillating visual stimulus. Children appear to competently perceive and respond to chaotic motion, both in rate (cRQA-percent determinism) and duration (cRQA-maxline) of coordination. We interpret this to indicate that children not only recognize chaotic motion structures, but also have a preference for coordination with them. Further, stratification of our sample (by age) uncovers the suggestion that this preference may become refined with age. PMID:25852600

The respective roles of polar/nonpolar binary patterns and amino acid composition in protein regular secondary structures explored exhaustively using hydrophobic cluster analysis.

PubMed

Rebehmed, Joseph; Quintus, Flavien; Mornon, Jean-Paul; Callebaut, Isabelle

2016-05-01

Several studies have highlighted the leading role of the sequence periodicity of polar and nonpolar amino acids (binary patterns) in the formation of regular secondary structures (RSS). However, these were based on the analysis of only a few simple cases, with no direct mean to correlate binary patterns with the limits of RSS. Here, HCA-derived hydrophobic clusters (HC) which are conditioned binary patterns whose positions fit well those of RSS, were considered. All the HC types, defined by unique binary patterns, which were commonly observed in three-dimensional (3D) structures of globular domains, were analyzed. The 180 HC types with preferences for either α-helices or β-strands distinctly contain basic binary units typical of these RSS. Therefore a general trend supporting the "binary pattern preference" assumption was observed. HC for which observed RSS are in disagreement with their expected behavior (discordant HC) were also examined. They were separated in HC types with moderate preferences for RSS, having "weak" binary patterns and versatile RSS and HC types with high preferences for RSS, having "strong" binary patterns and then displaying nonpolar amino acids at the protein surface. It was shown that in both cases, discordant HC could be distinguished from concordant ones by well-differentiated amino acid compositions. The obtained results could, thus, help to complement the currently available methods for the accurate prediction of secondary structures in proteins from the only information of a single amino acid sequence. This can be especially useful for characterizing orphan sequences and for assisting protein engineering and design. © 2016 Wiley Periodicals, Inc.

Assessing the Strength Enhancement of Heterogeneous Networks of Miscible Polymer Blends

NASA Astrophysics Data System (ADS)

Giller, Carl; Roland, Mike

2013-03-01

At the typical crosslink densities of elastomers, the failure properties vary inversely with mechanical stiffness, so that compounding entails a compromise between stiffness and strength. Our approach to circumvent this conventional limitation is by forming networks of two polymers that: (i) are thermodynamically miscible, whereby the chemical composition is uniform on the segmental level; and (ii) have markedly different reactivities for network formation. The resulting elastomer consists of one highly crosslinked component and one that is lightly or uncrosslinked. This disparity in crosslinking causes their respective contributions to the network mechanical response to differ diametrically. Earlier results showed some success with this approach for thermally crosslinked blends of 1,2-polybutadiene (PVE) and polyisoprene (PI), as well as ethylene-propylene copolymer (EPM) and ethylene-propylene-diene random terpolymer (EPDM), taking advantage of their differing reactivities to sulfur. In this work we demonstrate the miscibility of polyisobutylene (PIB) with butyl rubber (BR) (a copolymer of PIB and polyisoprene) and show that networks in which only the BR is crosslinked possess greater tensile strengths than neat BR over the same range of moduli. Office of Naval Research

An accurate and stable nitrate-selective electrode for the in situ determination of nitrate in agricultural drainage waters.

PubMed

Le Goff, Thierry; Braven, Jim; Ebdon, Les; Chilcottt, Neil P; Scholefield, David; Wood, John W

2002-04-01

A field evaluation of a novel nitrate-ion selective electrode (ISE) was undertaken by continuous immersion over a period of 5 months in agricultural drainage weirs. The nitrate sensor N,N,N-triallyl leucine betaine was covalently attached to polystyrene-block-polybutadiene-block-polystyrene (SBS) using a free radical initiated co-polymerisation, to produce a rubbery membrane which was incorporated into a commercially available electrode body. A measurement unit was constructed comprising the nitrate-ISEs, a reference electrode and a temperature probe connected through a pre-amplifier to a data-logger and battery supply. A temperature correction algorithm was developed to accomodate the temperature changes encountered in the drainage weirs. The nitrate results obtained with the ISEs at hourly intervals compared very favourably (R2 = 0.99) with those obtained with laboratory automated chemical determinations made on contemporaneous samples of drainage in a concentration range 0.47-16 ppm nitrate-N. The ISEs did not require re-calibration and no deterioration in performance or fouling of the membrane surface was observed over four months of deployment.

Host polymer influence on dilute polystyrene segmental dynamics

NASA Astrophysics Data System (ADS)

Lutz, T. R.

2005-03-01

We have utilized deuterium NMR to investigate the segmental dynamics of dilute (2%) d3-polystyrene (PS) chains in miscible polymer blends with polybutadiene, poly(vinyl ethylene), polyisoprene, poly(vinyl methylether) and poly(methyl methacrylate). In the dilute limit, we find qualitative differences depending upon whether the host polymer has dynamics that are faster or slower than that of pure PS. In blends where PS is the fast (low Tg) component, segmental dynamics are slowed upon blending and can be fit by the Lodge-McLeish model. When PS is the slow (high Tg) component, PS segmental dynamics speed up upon blending, but cannot be fit by the Lodge-McLeish model unless a temperature dependent self-concentration is employed. These results are qualitatively consistent with a recent suggestion by Kant, Kumar and Colby (Macromolecules, 2003, 10087), based upon data at higher concentrations. Furthermore, as the slow component, we find the segmental dynamics of PS has a temperature dependence similar to that of its host. This suggests viewing the high Tg component dynamics in a miscible blend as similar to a polymer in a low molecular weight solvent.

Hybrid propulsion technology program: Phase 1, volume 4

NASA Technical Reports Server (NTRS)

Claflin, S. E.; Beckman, A. W.

1989-01-01

The use of a liquid oxidizer-solid fuel hybrid propellant combination in booster rocket motors appears extremely attractive due to the integration of the best features of liquid and solid propulsion systems. The hybrid rocket combines the high performance, clean exhaust, and safety of liquid propellant engines with the low cost and simplicity of solid propellant motors. Additionally, the hybrid rocket has unique advantages such as an inert fuel grain and a relative insensitivity to fuel grain and oxidizer injection anomalies. The advantages mark the hybrid rocket as a potential replacement or alternative for current and future solid propellant booster systems. The issues are addressed and recommendations are made concerning oxidizer feed systems, injectors, and ignition systems as related to hybrid rocket propulsion. Early in the program a baseline hybrid configuration was established in which liquid oxygen would be injected through ports in a solid fuel whose composition is based on hydroxyl terminated polybutadiene (HTPB). Liquid oxygen remained the recommended oxidizer and thus all of the injector concepts which were evaluated assumed only liquid would be used as the oxidizer.

Recyclable crosslinked polymer networks with full property recovery made via one-step controlled radical polymerization

NASA Astrophysics Data System (ADS)

Jin, Kailong; Li, Lingqiao; Torkelson, John

Rubber tires illustrate well the issues ranging from economic loss to environmental problems and sustainability issues that arise with spent, covalently crosslinked polymers. A nitroxide-mediated polymerization (NMP) strategy has been developed that allows for one-step synthesis of recyclable crosslinked polymers from monomers or polymers that contain carbon-carbon double bonds amenable to radical polymerization. Resulting materials possess dynamic alkoxyamine crosslinks that undergo reversible decrosslinking as a function of temperature. Using polybutadiene as starting material, and styrene, an appropriate nitroxide molecule and bifunctional initiator for initial crosslinking, a model for tire rubber can be produced by reaction at temperatures comparable to those employed in tire molding. Upon cooling, the crosslinks are made permanent due to the extraordinarily strong temperature dependence of the reverisible nitroxide capping and uncapping reaction. Based on thermomechanical property characterization, when the original crosslinked model rubber is chopped into bits and remolded in the melt state, a well-consolidated material is obtained which exhibits full recovery of properties reflecting crosslink density after multiple recycling steps.

Experimental investigation of fuel regression rate in a HTPB based lab-scale hybrid rocket motor

NASA Astrophysics Data System (ADS)

Li, Xintian; Tian, Hui; Yu, Nanjia; Cai, Guobiao

2014-12-01

The fuel regression rate is an important parameter in the design process of the hybrid rocket motor. Additives in the solid fuel may have influences on the fuel regression rate, which will affect the internal ballistics of the motor. A series of firing experiments have been conducted on lab-scale hybrid rocket motors with 98% hydrogen peroxide (H2O2) oxidizer and hydroxyl terminated polybutadiene (HTPB) based fuels in this paper. An innovative fuel regression rate analysis method is established to diminish the errors caused by start and tailing stages in a short time firing test. The effects of the metal Mg, Al, aromatic hydrocarbon anthracene (C14H10), and carbon black (C) on the fuel regression rate are investigated. The fuel regression rate formulas of different fuel components are fitted according to the experiment data. The results indicate that the influence of C14H10 on the fuel regression rate of HTPB is not evident. However, the metal additives in the HTPB fuel can increase the fuel regression rate significantly.

Effect of Carbon Black on Elastomer Blends

NASA Astrophysics Data System (ADS)

Si, Mayu; Koga, Tadanori; Ji, Yuan; Seo, Young-Soo; Rafailovich, Miriam; Sokolov, Jonathan; Gerspacher, M.; Dias, A. J.; Karp, Kriss R.; Satija, Sushil; Lin, Min Y.

2003-03-01

The effects of untreated and heat-treated carbon black N299 on the interfacial properties of PB (Polybutadiene) and terpolymer BIMS [brominated Poly(isobutylene-co-methyl styrene)] were investigated by neutron reflectivity (NR) and lateral force microscopy (LFM). The NR results show that the addition of carbon black significantly slows down the interfacial broadening while heat-treated carbon black has less effect on slowing down the diffusion compared with untreated carbon black. These results were confirmed by the LFM data, which shows the magnitude of lateral force loop of heat-treated carbon black is bigger than that of untreated one. Ultra small and small angle neutron scattering (USANS and SANS) were used to probe the morphology and surface lateral force. Increasing volume concentration of carbon black to 5glass transition temperature of BIMS is also decreased, which was measured by Differential scanning Calorimeter (DSC). XRD analysis indicates that the heat treatment crystallizes the carbon black and strong graphitic peaks are observed. The large degree of crystallization decreases the interaction with the polymer matrix and hence minimizes the effect on the internal dynamics

Effect of Propellant Composition to the Temperature Sensitivity of Composite Propellant

NASA Astrophysics Data System (ADS)

Aziz, Amir; Mamat, Rizalman; Amin, Makeen; Ali, Wan Khairuddin Wan

2012-09-01

The propellant composition is one of several parameter that influencing the temperature sensitivity of composite propellant. In this paper, experimental investigation of temperature sensitivity in burning rate of composite propellant was conducted. Four sets of different propellant compositions had been prepared with the combination of ammonium perchlorate (AP) as an oxidizer, aluminum (Al) as fuel and hydroxy-terminated polybutadiene (HTPB) as fuel and binder. For each mixture, HTPB binder was fixed at 15% and cured with isophorone diisocyanate (IPDI). By varying AP and Al, the effect of oxidizer- fuel mixture ratio (O/F) on the whole propellant can be determined. The propellant strands were manufactured using compression molded method and burnt in a strand burner using wire technique over a range of pressure from 1 atm to 31 atm. The results obtained shows that the temperature sensitivity, a, increases with increasing O/F. Propellant p80 which has O/F ratio of 80/20 gives the highest value of temperature sensitivity which is 1.687. The results shows that the propellant composition has significant effect on the temperature sensitivity of composite propellant

A study of the effects of solid phase reactions on the thermal degradation and ballistic properties of solid propellants

NASA Technical Reports Server (NTRS)

Schmidt, W. G.

1974-01-01

The thermal stability of perchlorate composite propellants was studied at 135 and 170 C. The experimental efforts were concentrated on determining the importance of heterogeneous oxidizer-fuel reactions in the thermal degradation process. The experimental approach used to elucidate the mechanisms by which the oxidizer fuel composites thermally degrade was divided into two parts: (1) keeping the fuel constant and varying the nature of the oxidizers, and (2) holding the oxidizer constant and varying the fuel components. The fuel component primarily utilized in the first phase was polyethylene. Oxidizers included KClO4, KClO3, NH4ClO4 and NH4ClO4 doped with materials such as chlorate, phosphate and arsenate. In the second phase the oxidizer used was primarily NH4ClO4 while the fuels included saturated and unsaturated polybutadiene prepolymers and a series of bonding agents. Techniques employed in the current study include thermogravimetric measurements, differential thermal analysis, infrared, mass spectrometry, electron microscopy, and appropriate wet chemical analysis.

Design and Production of an Articulating Needle Guide for Ultrasound-Guided Needle Block Manufactured With a Three-Dimensional Printer: Technical Communication.

PubMed

Bigeleisen, Paul E

2017-05-15

Needle guides may allow the practitioner to align the needle with the probe when ultrasound-guided nerve block is performed. The author's goal was to design and fabricate an inexpensive ($1.90), disposable, needle guide that could articulate over a range from 85 degrees to 0 degrees with a three-dimension printer. Three-dimensional representations of an L50, L25, and C 60 ultrasound probe (Sono Site, Bothell, WA) were created using a laser scanner. Computer-aided design software (Solid Works, Waltham, MA) was used to design a needle bracket and needle guide to attach to these probes. A three-dimensional printer was used to fabricate the needle bracket and guide with acrylonitrile polybutadiene polystyrene. An echogenic needle was held in plane with the needle guide. The author performed a supraclavicular block in a morbidly obese patient. The needle was easily visualized. Similar guides that are commercially available cost as much as $400. A knowledge of computer-aided design is necessary for this work.

Interfacial Properties of EXXPRO(TM) and General Purpose Elastomers

NASA Astrophysics Data System (ADS)

Zhang, Y.; Rafailovich, M.; Sokolov, Jon; Qu, S.; Ge, S.; Ngyuen, D.; Li, Z.; Peiffer, D.; Song, L.; Dias, J. A.; McElrath, K. O.

1998-03-01

EXXPRO(Trademark) elastomers are used for tires and many other applications. This elastomer (denoted as BIMS) is a random copolymer of p-methylstyrene (MS) and polyisobutylene (I) with varying degrees of PMS content and bromination (B) on the p-methyl group. BIMS is impermeable to gases, and has good heat, ozone and flex resistance. Very often general purpose elastomers are blended with BIMS. The interfacial width between polybutadiene and BIMS is a sensitive function of the Br level and PMS content. By neutron reflectivity (NR), we studied the dynamics of interface formation as a function of time and temperature for BIMS with varying degrees of PMS and Br. We found that in addition to the bulk parameters, the total film thickness and the proximity of an interactive surface can affect the interfacial interaction rates. The interfacial properties can also be modified by inclusion of particles, such as carbon black (a filler component in tire rubbers). Results will be presented on the relation between the interfacial width as measured by NR and compatibilization studies via AFM and LFM.

High-Fidelity Microstructural Characterization and Performance Modeling of Aluminized Composite Propellant

DOE PAGES

Kosiba, Graham D.; Wixom, Ryan R.; Oehlschlaeger, Matthew A.

2017-10-27

Image processing and stereological techniques were used to characterize the heterogeneity of composite propellant and inform a predictive burn rate model. Composite propellant samples made up of ammonium perchlorate (AP), hydroxyl-terminated polybutadiene (HTPB), and aluminum (Al) were faced with an ion mill and imaged with a scanning electron microscope (SEM) and x-ray tomography (micro-CT). Properties of both the bulk and individual components of the composite propellant were determined from a variety of image processing tools. An algebraic model, based on the improved Beckstead-Derr-Price model developed by Cohen and Strand, was used to predict the steady-state burning of the aluminized compositemore » propellant. In the presented model the presence of aluminum particles within the propellant was introduced. The thermal effects of aluminum particles are accounted for at the solid-gas propellant surface interface and aluminum combustion is considered in the gas phase using a single global reaction. In conclusion, properties derived from image processing were used directly as model inputs, leading to a sample-specific predictive combustion model.« less

High-Fidelity Microstructural Characterization and Performance Modeling of Aluminized Composite Propellant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kosiba, Graham D.; Wixom, Ryan R.; Oehlschlaeger, Matthew A.

Image processing and stereological techniques were used to characterize the heterogeneity of composite propellant and inform a predictive burn rate model. Composite propellant samples made up of ammonium perchlorate (AP), hydroxyl-terminated polybutadiene (HTPB), and aluminum (Al) were faced with an ion mill and imaged with a scanning electron microscope (SEM) and x-ray tomography (micro-CT). Properties of both the bulk and individual components of the composite propellant were determined from a variety of image processing tools. An algebraic model, based on the improved Beckstead-Derr-Price model developed by Cohen and Strand, was used to predict the steady-state burning of the aluminized compositemore » propellant. In the presented model the presence of aluminum particles within the propellant was introduced. The thermal effects of aluminum particles are accounted for at the solid-gas propellant surface interface and aluminum combustion is considered in the gas phase using a single global reaction. In conclusion, properties derived from image processing were used directly as model inputs, leading to a sample-specific predictive combustion model.« less

Detection of Nisin and Fibrinogen Adsorption on Poly(ethylene Oxide) Coated Polyurethane Surfaces by Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS)

PubMed Central

Schilke, Karl F.; McGuire, Joseph

2011-01-01

Stable, pendant polyethylene oxide (PEO) layers were formed on medical-grade Pellethane® and Tygon® polyurethane surfaces, by adsorption and gamma-irradiation of PEO-polybutadiene-PEO triblock surfactants. Coated and uncoated polyurethanes were challenged individually or sequentially with nisin (a small polypeptide with antimicrobial activity) and/or fibrinogen, and then analyzed with time-of-flight secondary ion mass spectrometry (TOF-SIMS). Data reduction by robust principal components analysis (PCA) allowed detection of outliers, and distinguished adsorbed nisin and fibrinogen. Fibrinogen-contacted surfaces, with or without nisin, were very similar on uncoated polymer surfaces, consistent with nearly complete displacement or coverage of previously-adsorbed nisin by fibrinogen. In contrast, nisin-loaded PEO layers remained essentially unchanged upon challenge with fibrinogen, suggesting that the adsorbed nisin is stabilized within the pendant PEO layer, while the peptide-loaded PEO layer retains its ability to repel large proteins. Coatings of PEO loaded with therapeutic polypeptides on medical polymers have the potential to be used to produce anti-fouling and biofunctional surfaces for implantable or blood-contacting devices. PMID:21440897

Activations of "Motor" and Other Non-Language Structures during Sentence Comprehension

ERIC Educational Resources Information Center

Stowe, Laurie A.; Paans, Anne M. J.; Wijers, Albertus A.; Zwarts, Frans

2004-01-01

In this paper we report the results of an experiment in which subjects read syntactically unambiguous and ambiguous sentences which were disambiguated after several words to the less likely possibility. Understanding such sentences involves building an initial structure, inhibiting the non-preferred structure, detecting that later input is…

From the litter up and the sky down: Perspectives on urban forest structure and eco-hydrological processes (presentation)

EPA Science Inventory

The structure of the urban forest represents the complex product of local biophysical conditions, socio-economic milieu, people preferences and management with rare counterparts in rural forests. However, urban forest structure, as similarly observed in rural forests, affects key...

Exploring cognitive support use and preference by college students with TBI: A mixed-methods study.

PubMed

Brown, Jessica; Hux, Karen; Hey, Morgan; Murphy, Madeline

2017-01-01

Many college students with TBI rely on external strategies and supports to compensate for persistent memory, organization, and planning deficits that interfere with recalling and executing daily tasks. Practitioners know little, however, about the supports students with TBI choose for this purpose, the reasoning behind their choice, or preferred features of selected supports. The purpose of this study was to explore these issues. We collected and analyzed quantitative and qualitative data from eight college students with TBI for completion of a concurrent triangulation mixed-methods design. Data analysis included evaluation and triangulation of participant demographic information, survey responses about persistent post-injury symptoms, transcripts from semi-structured interviews about cognitive support devices and strategies, and ranking results about specific compensatory tools. Results suggest that college students with TBI prefer high-tech external supports-sometimes with the addition of low-tech, paper supports-to assist them in managing daily tasks. This preference related to features of portability, accessibility, and automatic reminders. An electronic calendar was the most-preferred high-tech support, and a paper checklist was the most-preferred low-tech support. Rehabilitation professionals should consider implementing high-tech supports with preferred characteristics during treatment given the preferences of students with TBI and the consequent likelihood of their continued long-term use following reintegration to community settings.

Prenatal hormones and childhood sex-segregation: Playmate and play style preferences in girls with congenital adrenal hyperplasia

PubMed Central

Pasterski, Vickie; Geffner, Mitchell E.; Brain, Caroline; Hindmarsh, Peter; Brook, Charles; Hines, Melissa

2011-01-01

We investigated playmate and play style preference in children with congenital adrenal hyperplasia (CAH) (26 females, 31 males) and their unaffected siblings (26 females, 17 males) using the Playmate and Play Style Preferences Structured Interview (PPPSI). Both unaffected boys and girls preferred same-sex playmates and sex-typical play styles. In the conflict condition where children chose between a same-sex playmate engaged in an other-sex activity or an other-sex playmate engaged in a same-sex activity, boys (both CAH and unaffected brothers) almost exclusively chose playmates based on the preferred play style of the playmate as opposed to the preferred gender label of the playmate. By contrast, unaffected girls used play style and gender label about equally when choosing playmates. Girls with CAH showed a pattern similar to that of boys: their playmate selections were more masculine than unaffected girls, they preferred a boy-typical play style and, in the conflict condition, chose playmates engaged in a masculine activity. These findings suggest that prenatal androgen exposure contributes to sex differences in playmate selection observed in typically-developing children, and that, among boys and girls exposed to high levels of androgens prenatally, play style preferences drive sex segregation in play. PMID:21338606

Prenatal hormones and childhood sex segregation: playmate and play style preferences in girls with congenital adrenal hyperplasia.

PubMed

Pasterski, Vickie; Geffner, Mitchell E; Brain, Caroline; Hindmarsh, Peter; Brook, Charles; Hines, Melissa

2011-04-01

We investigated playmate and play style preference in children with congenital adrenal hyperplasia (CAH) (26 females, 31 males) and their unaffected siblings (26 females, 17 males) using the Playmate and Play Style Preferences Structured Interview (PPPSI). Both unaffected boys and girls preferred same-sex playmates and sex-typical play styles. In the conflict condition where children chose between a same-sex playmate engaged in an other-sex activity or an other-sex playmate engaged in a same-sex activity, boys (both CAH and unaffected brothers) almost exclusively chose playmates based on the preferred play style of the playmate as opposed to the preferred gender label of the playmate. By contrast, unaffected girls used play style and gender label about equally when choosing playmates. Girls with CAH showed a pattern similar to that of boys: their playmate selections were more masculine than unaffected girls, they preferred a boy-typical play style and, in the conflict condition, chose playmates engaged in a masculine activity. These findings suggest that prenatal androgen exposure contributes to sex differences in playmate selection observed in typically developing children and that, among boys and girls exposed to high levels of androgens prenatally, play style preferences drive sex segregation in play. Copyright © 2011 Elsevier Inc. All rights reserved.

Music Preferences, Friendship, and Externalizing Behavior in Early Adolescence: A SIENA Examination of the Music Marker Theory Using the SNARE Study.

PubMed

Franken, Aart; Keijsers, Loes; Dijkstra, Jan Kornelis; Ter Bogt, Tom

2017-08-01

Music Marker Theory posits that music is relevant for the structuring of peer groups and that rock, urban, or dance music preferences relate to externalizing behavior. The present study tested these hypotheses, by investigating the role of music preference similarity in friendship selection and the development of externalizing behavior, while taking the effects of friends' externalizing behavior into account. Data were used from the first three waves of the SNARE (Social Network Analysis of Risk behavior in Early adolescence) study (N = 1144; 50% boys; M age  = 12.7; SD = 0.47), including students who entered the first-year of secondary school. Two hypotheses were tested. First, adolescents were expected to select friends based both on a similarity in externalizing behavior and music genre preference. Second, a preference for rock, urban, or dance, music types was expected to predict the development of externalizing behavior, even when taking friends' influence on externalizing behavior into account. Stochastic Actor-Based Modeling indicated that adolescents select their friends based on both externalizing behavior and highbrow music preference. Moreover, both friends' externalizing behavior and a preference for dance music predicted the development of externalizing behavior. Intervention programs might focus on adolescents with dance music preferences.

Health-seeking behavior and medical facility choice in Samsun, Turkey.

PubMed

Dündar, Cihad

2017-09-01

Examining the factors that play a role in determining patient preferences for different healthcare institutions. This descriptive study was conducted in five family health centers (FHC) and in six hospitals in Samsun Province in Turkey. The data were collected from 1700 volunteer patients by using a structured questionnaire, while they were waiting for consultation. The average number of out-patient visits was 9.5±6.4 per person in 2012. Individuals aged less than 18 and more than 65 years old had higher preferences for FHCs, while those aged 19-64 years preferred primarily private hospitals. The order of preferences for FHC, public and private hospitals did not vary with the educational level. An increase in educational level was associated with a decrease in the preference for FHCs and in increase in the preference for private hospitals. The first three reasons given for preferring a hospital were 'the presence of a specialist', 'availability of good equipment and technology', and 'trust on the diagnosis and treatment', while 'proximity', 'receiving adequate information', and 'being treated well' were the reasons given by participants who preferred a FHC. Providing medical equipment and staff support for improving diagnostic capacity of FHCs can accommodate patient expectations and shift the demand from hospitals to FHCs. Copyright © 2017 Elsevier B.V. All rights reserved.

Taxonomy of Individual Variations in Aesthetic Responses to Fractal Patterns

PubMed Central

Spehar, Branka; Walker, Nicholas; Taylor, Richard P.

2016-01-01

In two experiments, we investigate group and individual preferences in a range of different types of patterns with varying fractal-like scaling characteristics. In Experiment 1, we used 1/f filtered grayscale images as well as their thresholded (black and white) and edges only counterparts. Separate groups of observers viewed different types of images varying in slope of their amplitude spectra. Although with each image type, the groups exhibited the “universal” pattern of preference for intermediate amplitude spectrum slopes, we identified 4 distinct sub-groups in each case. Sub-group 1 exhibited a typical peak preference for intermediate amplitude spectrum slopes (“intermediate”; approx. 50%); sub-group 2 exhibited a linear increase in preference with increasing amplitude spectrum slope (“smooth”; approx. 20%), while sub-group 3 exhibited a linear decrease in preference as a function of the amplitude spectrum slope (“sharp”; approx. 20%). Sub-group 4 revealed no significant preference (“other”; approx. 10%). In Experiment 2, we extended the range of different image types and investigated preferences within the same observers. We replicate the results of our first experiment and show that individual participants exhibit stable patterns of preference across a wide range of image types. In both experiments, Q-mode factor analysis identified two principal factors that were able to explain more than 80% of interindividual variations in preference across all types of images, suggesting a highly similar dimensional structure of interindividual variations in preference for fractal-like scaling characteristics. PMID:27458365

Consumer preferences for fresh tomato at the European scale: a common segmentation on taste and firmness.

PubMed

Causse, Mathilde; Friguet, Chloé; Coiret, Clément; Lépicier, Mélanie; Navez, Brigitte; Lee, Monica; Holthuysen, Nancy; Sinesio, Fiorella; Moneta, Elisabetta; Grandillo, Silvana

2010-01-01

Although tomato flavor has not been a major goal for breeders, nowadays it becomes important as it is a subject of consumer complaint. A better knowledge of tomato consumer preferences, at the European level, should provide the basis for improvement of fruit quality and for market segmentation. In the framework of a large European project, 806 consumers from 3 countries, The Netherlands, France, and Italy, were presented with a set of 16 varieties representing the diversity of fresh tomato offer in order to evaluate their preferences. In parallel, sensory profiles were constructed by expert panels in each country. Preference maps were then constructed in each country revealing the structure of consumer preferences and allowing identification of the most important characteristics. Then a global analysis revealed that preferences were quite homogeneous across countries. This study identified the overall flavor and firmness as the most important traits for improving tomato fruit quality. It showed that consumer preferences from different European countries, with different cultures and food practices, are segmented following similar patterns when projected onto a common referential plan. Moreover, the results clearly showed that diversification of taste and texture is required to satisfy all consumers' expectations as some consumers preferred firm tomatoes, while others preferred melting ones and were more or less demanding in terms of sweetness and flavor intensity. Detailed comparisons also showed the importance of the fruit appearance in consumer preference. © 2010 Institute of Food Technologists®

Crystal Structures of the Novel Cytosolic 5′-Nucleotidase IIIB Explain Its Preference for m7GMP

PubMed Central

Monecke, Thomas; Buschmann, Juliane; Neumann, Piotr; Wahle, Elmar; Ficner, Ralf

2014-01-01

5′-nucleotidases catalyze the hydrolytic dephosphorylation of nucleoside monophosphates. As catabolic enzymes they contribute significantly to the regulation of cellular nucleotide levels; misregulation of nucleotide metabolism and nucleotidase deficiencies are associated with a number of diseases. The seven human 5′-nucleotidases differ with respect to substrate specificity and cellular localization. Recently, the novel cytosolic 5′-nucleotidase III-like protein, or cN-IIIB, has been characterized in human and Drosophila. cN-IIIB exhibits a strong substrate preference for the modified nucleotide 7-methylguanosine monophosphate but the structural reason for this preference was unknown. Here, we present crystal structures of cN-IIIB from Drosophila melanogaster bound to the reaction products 7-methylguanosine or cytidine. The structural data reveal that the cytosine- and 7-methylguanine moieties of the products are stacked between two aromatic residues in a coplanar but off-centered position. 7-methylguanosine is specifically bound through π-π interactions and distinguished from unmodified guanosine by additional cation-π coulomb interactions between the aromatic side chains and the positively charged 7-methylguanine. Notably, the base is further stabilized by T-shaped edge-to-face stacking of an additional tryptophan packing perpendicularly against the purine ring and forming, together with the other aromates, an aromatic slot. The structural data in combination with site-directed mutagenesis experiments reveal the molecular basis for the broad substrate specificity of cN-IIIB but also explain the substrate preference for 7-methylguanosine monophosphate. Analyzing the substrate specificities of cN-IIIB and the main pyrimidine 5′-nucleotidase cN-IIIA by mutagenesis studies, we show that cN-IIIA dephosphorylates the purine m7GMP as well, hence redefining its substrate spectrum. Docking calculations with cN-IIIA and m7GMP as well as biochemical data reveal that Asn69 does not generally exclude the turnover of purine substrates thus correcting previous suggestions. PMID:24603684

Music mixing preferences of cochlear implant recipients: a pilot study.

PubMed

Buyens, Wim; van Dijk, Bas; Moonen, Marc; Wouters, Jan

2014-05-01

Music perception and appraisal are generally poor in cochlear implant recipients. Simple musical structures, lyrics that are easy to follow, and clear rhythm/beat have been reported among the top factors to enhance music enjoyment. The present study investigated the preference for modified relative instrument levels in music with normal-hearing and cochlear implant subjects. In experiment 1, test subjects were given a mixing console and multi-track recordings to determine their most enjoyable audio mix. In experiment 2, a preference rating experiment based on the preferred relative level settings in experiment 1 was performed. Experiment 1 was performed with four postlingually deafened cochlear implant subjects, experiment 2 with ten normal-hearing and ten cochlear implant subjects. A significant difference in preference rating was found between normal-hearing and cochlear implant subjects. The latter preferred an audio mix with larger vocals-to-instruments ratio. In addition, given an audio mix with clear vocals and attenuated instruments, cochlear implant subjects preferred the bass/drum track to be louder than the other instrument tracks. The original audio mix in real-world music might not be suitable for cochlear implant recipients. Modifying the relative instrument level settings potentially improves music enjoyment.

"In the physio we trust": A qualitative study on patients' preferences for physiotherapy.

PubMed

Bernhardsson, Susanne; Larsson, Maria E H; Johansson, Kajsa; Öberg, Birgitta

2017-07-01

Patients' preferences should be integrated in evidence-based practice. This study aimed to explore patients' preferences for physiotherapy treatment and participation in decision making. A qualitative study set in an urban physiotherapy clinic in Gothenburg, Sweden. Individual, semi-structured interviews were conducted with 20 individuals who sought physiotherapy for musculoskeletal disorders. The interviews were recorded, transcribed, and analyzed with qualitative content analysis. An overarching theme, embracing six categories, was conceptualized: Trust in the physiotherapist fosters active engagement in therapy. The participants preferred active treatment strategies such as exercise and advice for self-management, allowing them to actively engage in their therapy. Some preferred passive treatments. Key influencers on treatment preferences were previous experiences and media. All participants wanted to be involved in the clinical decision making, but to varying extents. Some expressed a preference for an active role and wanting to share decisions while others were content with a passive role. Expectations for a professional management were reflected in trust and confidence in physiotherapists' skills and competence, expectations for good outcomes, and believing that treatment methods should be evidence-based. Trust in the physiotherapist's competence, as well as a desire to participate in clinical decision making, fosters active engagement in physiotherapy.

Atomistic simulations of bulk, surface and interfacial polymer properties

NASA Astrophysics Data System (ADS)

Natarajan, Upendra

In chapter I, quasi-static molecular mechanics based simulations are used to estimate the activation energy of phenoxy rings flips in the amorphous region of a semicrystalline polyimide. Intra and intermolecular contributions to the flip activation energy, the torsional cooperativity accompanying the flip, and the effect of the flip on the motion in the glassy bulk state, are looked at. Also, comparison of the weighted mean activation energy is made with experimental data from solid state NMR measurements; the simulated value being 17.5 kcal/mol., while the experimental value was observed to be 10.5 kcal/mol. Chapter II deals with construction of random copolymer thin films of styrene-butadiene (SB) and styrene-butadiene-acrylonitrile (SBA). The structure and properties of the free surfaces presented by these thin films are analysed by, the atom mass density profiles, backbone bond orientation function, and the spatial distribution of acrylonitrile groups and styrene rings. The surface energies of SB and SBA are calculated using an atomistic equation and are compared with experimental data in the literature. In chapter III, simulations of polymer-polymer interfaces between like and unlike polymers, specifically cis-polybutadiene (PBD) and atatic polypropylene (PP), are presented. The structure of an incompatible polymer-polymer interface, and the estimation of the thermodynamic work of adhesion and interfacial energy between different incompatible polymers, form the focus here. The work of adhesion is calculated using an atomistic equation and is further used in a macroscopic equation to estimate the interfacial energy. The interfacial energy is compared with typical values for other immiscible systems in the literature. The interfacial energy compared very well with interfacial energy values for a few other immiscible hydrocarbon pairs. In chapter IV, the study proceeds to look at the interactions between nonpolar and polar small molecules with SB and SBA thin film surfaces. Toluene, hexadecane and water molecules are separately simulated to interact with SB and SBA surfaces in vacuum. The energetics of interaction are calculated atomistically and used in the atomistic equation to calculate the interfacial energy or the interaction energy. Comparisons with experimental data are not made due to the small concentrations of the molecules on the polymer surface. However, fundamental understanding of the structure of the system and the breakup of the energetics are provided by such a study.

Novel Hydrogels from Telechelic Polymers

NASA Astrophysics Data System (ADS)

Taribagil, Rajiv R.

The last two decades have seen telechelic polymers support an increasing number of applications as stabilizers and flow modifiers in fields as varied as pharmaceutics, paints and oil recovery. Mainly consisting of a long hydrophilic block end-capped with hydrophobic blocks, these polymers form gels at modest concentrations, comprising hydrophobic junctions with hydrophilic blocks bridging these junctions. This thesis examines two different types of telechelic polymer hydrogels: concentrated dispersions of telechelic triblock copolymers and dilute solutions of wormlike micelles cross-linked by hydrophobically end-capped polymers. Aqueous gels of telechelic poly(ethylene oxide) (PEO)-based triblock polymers, with homo and hetero combinations of 1,2-polybutadiene (PB) and poly(perfluoropropylene oxide) (PFPO) as hydrophobic end-blocks, were investigated using a combination of cryogenic scanning electron microscopy and small-angle neutron scattering. The PB-b-PEO-b-PB copolymers formed networks of spherical micelles at all concentrations as expected, albeit with significant spatial heterogeneity that diminished with increasing concentration. The PFPO-b-PEO-b-PFPO copolymers also formed networks by aggregation of the end-blocks, but the PFPO blocks tended to adopt disk-like or even sheet-like structures. This is attributed to the extremely high interfacial tension of PFPO with water and is consistent with the "super-strong" segregation regime behavior. The heterotelechelic PB-b-PEO- b-PFPO terpolymers adopted a quite different structure, namely an intricate bicontinuous open-cell foam, with cells on the order of 500 nm in size and cell walls composed of PFPO disks embedded in PB sheets. These various network structures illustrate the potential of using end-block chemistry to manipulate both the morphology and the physical properties of polymer gels. Dilute aqueous solutions containing 1 wt% cetyltrimethylammonium tosylate, a surfactant well recognized to form wormlike micelles, and low concentrations of hydrophobically end-capped poly(ethylene oxide), were investigated using dynamic mechanical spectroscopy and small-angle neutron scattering. The detailed examination shows that addition of as little as 0.1 wt% of the polymer to the dilute wormlike micelle solution leads to a massive enhancement in its viscoelastic response. This phenomenon raises the possibility of significantly reducing the amount of additive required to achieve a desired rheological profile, with concomitant advantages in both cost and environmental impact.

Gender preferences among antenatal women: a cross-sectional study from coastal South India.

PubMed

Nithin, Kumar; Tanuj, Kanchan; Unnikrishnan, Bhaskaran; Rekha, T; Prasanna, Mithra; Vaman, Kulkarni; Ramesh, Holla; Darshan, Bhagwan; Samskruthi, Reddy

2015-06-01

A balanced sex ratio is essential for a stable society. The main objective of the present research was to study the perceptions of women attending the antenatal care (ANC) facility regarding their gender preferences and family composition. In this cross-sectional study 132 antenatal women were interviewed in their preferred language using a predesigned semi-structured questionnaire. The collected information was analyzed using SPSS version 11.5. The mean age of the study participants was 27.2 ± 4.1 years. The majority of the antenatal women (60.6%, n=80) did not have any gender preferences. Among those who had a gender preference (39.4%, n=52), male and female preference was reported by 55.7% (n=29) and 44.3% (n=23) of the participants respectively. The overall son preference index was observed to be 1.3. No consistent relationship could be established between the socio-demographic factors and the preference for gender. The mean preferred family size in our study was 1.85±0.531 and more than half of the participants had a balanced gender preference. The majority of the participants were aware that the adverse sex ratio can lead to fall in the number of brides and that it would bring about a social imbalance. As a developed society we need to ensure that both the genders get equal respect and are free from any sort of preferences and prejudices. To achieve this, more and more people need to be made aware of the consequences of gender imbalance and adverse sex ratio in a society.

SSMART: Sequence-structure motif identification for RNA-binding proteins.

PubMed

Munteanu, Alina; Mukherjee, Neelanjan; Ohler, Uwe

2018-06-11

RNA-binding proteins (RBPs) regulate every aspect of RNA metabolism and function. There are hundreds of RBPs encoded in the eukaryotic genomes, and each recognize its RNA targets through a specific mixture of RNA sequence and structure properties. For most RBPs, however, only a primary sequence motif has been determined, while the structure of the binding sites is uncharacterized. We developed SSMART, an RNA motif finder that simultaneously models the primary sequence and the structural properties of the RNA targets sites. The sequence-structure motifs are represented as consensus strings over a degenerate alphabet, extending the IUPAC codes for nucleotides to account for secondary structure preferences. Evaluation on synthetic data showed that SSMART is able to recover both sequence and structure motifs implanted into 3'UTR-like sequences, for various degrees of structured/unstructured binding sites. In addition, we successfully used SSMART on high-throughput in vivo and in vitro data, showing that we not only recover the known sequence motif, but also gain insight into the structural preferences of the RBP. Availability: SSMART is freely available at https://ohlerlab.mdc-berlin.de/software/SSMART_137/. Supplementary data are available at Bioinformatics online.

Structural transition with thickness in films of poly-(styrene-b-2vinylpyridine) (PS-b-P2VP) diblock copolymer/homopolymer blends

NASA Astrophysics Data System (ADS)

Mishra, Vindhya; Kramer, Edward; Hur, Su-Mi; Fredrickson, Glenn; Sprung, Michael

2009-03-01

In multilayer thin films of spherical morphology block copolymers, the surface layers prefer hexagonal symmetry while the inner layers prefer BCC. Thin films with spherical morphology of PS-b-P2VP blends with short homopolymer polystyrene (hPS) chains have an HCP structure up to a thickness n* at which there is a transition to a face centered orthorhombic structure. Using grazing incidence small angle X-ray scattering and transmission electron microscopy we show that that n* increases from 5 to 9 with increase in hPS from 0 to 12 vol%. For thicknesses just below n* the HCP and FCO structures coexist, but on long annealing HCP prevails. We hypothesize that the PS segregates to the interstices in the HCP structure reducing the stretching of the PS blocks and the free energy penalty of HCP versus BCC inner layers. Self consistent field theoretic simulations are being carried out to see if this idea is correct.

Theoretical studies on the molecular structure, conformational preferences, topological and vibrational analysis of allicin

NASA Astrophysics Data System (ADS)

Durlak, Piotr; Berski, Sławomir; Latajka, Zdzisław

2016-01-01

The molecular structure, conformational preferences, topological and vibrational analysis of allicin has been investigated at two different approaches. Calculations have been carried out on static (DFT and MP2) levels with an assortment of Dunning's basis sets and dynamic CPMD simulations. In this both case within the isolated molecule approximation. The results point out that at least twenty different conformers coexist on the PES as confirmed by the flexible character of this molecule. The topological analysis of ELF showed very similar nature of the Ssbnd S and Ssbnd O bonds. The infrared spectrum has been calculated, and a comparative vibrational analysis has been performed.

Spacer conformation in biologically active molecules. Part 1. Structure and conformational preferences of 2-substituted benzoxazoles

NASA Astrophysics Data System (ADS)

Czylkowski, R.; Karolak-Wojciechowska, J.; Mrozek, A.; Yalçin, I.; Aki-Şener, E.

2001-12-01

The mutual position of two pharmacophoric elements in flexible biologically active molecules depends on the spacer conformation. This is true even for a two-atomic chain put to use as a spacer. It was established for 2-substituted-benzoxazoles containing two aromatic centres joined by -CH2-X- (X=S or O). From crystallographic studies of four molecules it was found that the role of heteroatom is essential for the whole molecule conformation. The spacer with X=S adopts the (-)synclinal conformation while for X=O the (+)antiperiplanar one. Such preferences were also found in the statistical data from Cambridge Structural Database (CSD).

Discrete choice modeling of season choice for Minnesota turkey hunters

USGS Publications Warehouse

Schroeder, Susan A.; Fulton, David C.; Cornicelli, Louis; Merchant, Steven S.

2018-01-01

Recreational turkey hunting exemplifies the interdisciplinary nature of modern wildlife management. Turkey populations in Minnesota have reached social or biological carrying capacities in many areas, and changes to turkey hunting regulations have been proposed by stakeholders and wildlife managers. This study employed discrete stated choice modeling to enhance understanding of turkey hunter preferences about regulatory alternatives. We distributed mail surveys to 2,500 resident turkey hunters. Results suggest that, compared to season structure and lotteries, additional permits and level of potential interference from other hunters most influenced hunter preferences for regulatory alternatives. Low hunter interference was preferred to moderate or high interference. A second permit issued only to unsuccessful hunters was preferred to no second permit or permits for all hunters. Results suggest that utility is not strictly defined by harvest or an individual's material gain but can involve preference for other outcomes that on the surface do not materially benefit an individual. Discrete stated choice modeling offers wildlife managers an effective way to assess constituent preferences related to new regulations before implementing them. 

Parental perspectives on inpatient versus outpatient management of pediatric febrile neutropenia.

PubMed

Diorio, Caroline; Martino, Julia; Boydell, Katherine Mary; Ethier, Marie-Chantal; Mayo, Chris; Wing, Richard; Teuffel, Oliver; Sung, Lillian; Tomlinson, Deborah

2011-01-01

To describe parent preference for treatment of febrile neutropenia and the key drivers of parental decision making, structured face-to-face interviews were used to elicit parent preferences for inpatient versus outpatient management of pediatric febrile neutropenia. Parents were presented with 4 different scenarios and asked to indicate which treatment option they preferred and to describe reasons for this preference during the face-to-face interview. Comments were recorded in writing by research assistants. A consensus approach to thematic analysis was used to identify themes from the written comments of the research assistants. A total of 155 parents participated in the study. Of these, 80 (51.6%) parents identified hospital-based intravenous treatment as the most preferred treatment scenario for febrile neutropenia. The major themes identified included convenience/disruptiveness, physical health, emotional well-being, and modifiers of parental decision making. Most parents preferred hospital-based treatment for febrile neutropenia. An understanding of issues that influence parental decision making may assist health care workers in planning program implementation and further support families in their decision-making process.

Using Shared Online Blogs to Structure and Support Informal Coach Learning--Part 1: A Tool to Promote Reflection and Communities of Practice

ERIC Educational Resources Information Center

Stoszkowski, John; Collins, Dave

2017-01-01

Coaches' apparent preferences for informal and self-directed modes of learning have been highlighted in the literature. Consequently, there is a need for innovative coach education approaches that complement these clearly preferred, informal routes and better provide coaches with the professional skills they need to deal with the complex nature of…

Subjective Values of Quality of Life Dimensions in Elderly People. A SEM Preference Model Approach

ERIC Educational Resources Information Center

Elosua, Paula

2011-01-01

This article proposes a Thurstonian model in the framework of Structural Equation Modelling (SEM) to assess preferences among quality of life dimensions for the elderly. Data were gathered by a paired comparison design in a sample comprised of 323 people aged from 65 to 94 years old. Five dimensions of quality of life were evaluated: Health,…

Using multi-scale distribution and movement effects along a montane highway to identify optimal crossing locations for a large-bodied mammal community

PubMed Central

Römer, Heinrich; Germain, Ryan R.

2013-01-01

Roads are a major cause of habitat fragmentation that can negatively affect many mammal populations. Mitigation measures such as crossing structures are a proposed method to reduce the negative effects of roads on wildlife, but the best methods for determining where such structures should be implemented, and how their effects might differ between species in mammal communities is largely unknown. We investigated the effects of a major highway through south-eastern British Columbia, Canada on several mammal species to determine how the highway may act as a barrier to animal movement, and how species may differ in their crossing-area preferences. We collected track data of eight mammal species across two winters, along both the highway and pre-marked transects, and used a multi-scale modeling approach to determine the scale at which habitat characteristics best predicted preferred crossing sites for each species. We found evidence for a severe barrier effect on all investigated species. Freely-available remotely-sensed habitat landscape data were better than more costly, manually-digitized microhabitat maps in supporting models that identified preferred crossing sites; however, models using both types of data were better yet. Further, in 6 of 8 cases models which incorporated multiple spatial scales were better at predicting preferred crossing sites than models utilizing any single scale. While each species differed in terms of the landscape variables associated with preferred/avoided crossing sites, we used a multi-model inference approach to identify locations along the highway where crossing structures may benefit all of the species considered. By specifically incorporating both highway and off-highway data and predictions we were able to show that landscape context plays an important role for maximizing mitigation measurement efficiency. Our results further highlight the need for mitigation measures along major highways to improve connectivity between mammal populations, and illustrate how multi-scale data can be used to identify preferred crossing sites for different species within a mammal community. PMID:24244912

Resting and feeding preferences of Anopheles stephensi in an urban setting, perennial for malaria.

PubMed

Thomas, Shalu; Ravishankaran, Sangamithra; Justin, N A Johnson Amala; Asokan, Aswin; Mathai, Manu Thomas; Valecha, Neena; Montgomery, Jacqui; Thomas, Matthew B; Eapen, Alex

2017-03-10

The Indian city of Chennai is endemic for malaria and the known local malaria vector is Anopheles stephensi. Plasmodium vivax is the predominant malaria parasite species, though Plasmodium falciparum is present at low levels. The urban ecotype of malaria prevails in Chennai with perennial transmission despite vector surveillance by the Urban Malaria Scheme (UMS) of the National Vector Borne Disease Control Programme (NVBDCP). Understanding the feeding and resting preferences, together with the transmission potential of adult vectors in the area is essential in effective planning and execution of improved vector control measures. A yearlong survey was carried out in cattle sheds and human dwellings to check the resting, feeding preferences and transmission potential of An. stephensi. The gonotrophic status, age structure, resting and host seeking preferences were studied. The infection rate in An. stephensi and Anopheles subpictus were analysed by circumsporozoite ELISA (CS-ELISA). Adult vectors were found more frequently and at higher densities in cattle sheds than human dwellings. The overall Human Blood Index (HBI) was 0.009 indicating the vectors to be strongly zoophilic. Among the vectors collected from human dwellings, 94.2% were from thatched structures and the remaining 5.8% from tiled and asbestos structures. 57.75% of the dissected vectors were nulliparous whereas, 35.83% were monoparous and the rest 6.42% biparous. Sporozoite positivity rate was 0.55% (4/720) and 1.92% (1/52) for An. stephensi collected from cattle sheds and human dwellings, respectively. One adult An. subpictus (1/155) was also found to be infected with P. falciparum. Control of the adult vector populations can be successful only by understanding the resting and feeding preferences. The present study indicates that adult vectors predominantly feed on cattle and cattle sheds are the preferred resting place, possibly due to easy availability of blood meal source and lack of any insecticide or repellent pressure. Hence targeting these resting sites with cost effective, socially acceptable intervention tools, together with effective larval source management to reduce vector breeding, could provide an improved integrated vector management strategy to help drive down malaria transmission and assist in India's plan to eliminate malaria by 2030.

The Basis of the Syllable Hierarchy: Articulatory Pressures or Universal Phonological Constraints?

PubMed

Zhao, Xu; Berent, Iris

2018-02-01

Across languages, certain syllable types are systematically preferred to others (e.g., [Formula: see text] lbif, where [Formula: see text] indicates a preference). Previous research has shown that these preferences are active in the brains of individual speakers, they are evident even when none of these syllable types exists in participants' language, and even when the stimuli are presented in print. These results suggest that the syllable hierarchy cannot be reduced to either lexical or auditory/phonetic pressures. Here, we examine whether the syllable hierarchy is due to articulatory pressures. According to the motor embodiment view, the perception of a linguistic stimulus requires simulating its production; dispreferred syllables (e.g., lbif) are universally disliked because their production is harder to simulate. To address this possibility, we assessed syllable preferences while articulation was mechanically suppressed. Our four experiments each found significant effects of suppression. Remarkably, people remained sensitive to the syllable hierarchy regardless of suppression. Specifically, results with auditory materials (Experiments 1-2) showed strong effects of syllable structure irrespective of suppression. Moreover, syllable structure uniquely accounted for listeners' behavior even when controlling for several phonetic characteristics of our auditory materials. Results with printed stimuli (Experiments 3-4) were more complex, as participants in these experiments relied on both phonological and graphemic information. Nonetheless, readers were sensitive to most of the syllable hierarchy (e.g., [Formula: see text]), and these preferences emerged when articulation was suppressed, and even when the statistical properties of our materials were controlled via a regression analysis. Together, these findings indicate that speakers possess broad grammatical preferences that are irreducible to either sensory or motor factors.

Elucidating the interaction between light competition and herbivore feeding patterns using functional–structural plant modelling

PubMed Central

de Vries, Jorad; Poelman, Erik H; Anten, Niels; Evers, Jochem B

2018-01-01

Abstract Background and Aims Plants usually compete with neighbouring plants for resources such as light as well as defend themselves against herbivorous insects. This requires investment of limiting resources, resulting in optimal resource distribution patterns and trade-offs between growth- and defence-related traits. A plant’s competitive success is determined by the spatial distribution of its resources in the canopy. The spatial distribution of herbivory in the canopy in turn differs between herbivore species as the level of herbivore specialization determines their response to the distribution of resources and defences in the canopy. Here, we investigated to what extent competition for light affects plant susceptibility to herbivores with different feeding preferences. Methods To quantify interactions between herbivory and competition, we developed and evaluated a 3-D spatially explicit functional–structural plant model for Brassica nigra that mechanistically simulates competition in a dynamic light environment, and also explicitly models leaf area removal by herbivores with different feeding preferences. With this novel approach, we can quantitatively explore the extent to which herbivore feeding location and light competition interact in their effect on plant performance. Key Results Our results indicate that there is indeed a strong interaction between levels of plant–plant competition and herbivore feeding preference. When plants did not compete, herbivory had relatively small effects irrespective of feeding preference. Conversely, when plants competed, herbivores with a preference for young leaves had a strong negative effect on the competitiveness and subsequent performance of the plant, whereas herbivores with a preference for old leaves did not. Conclusions Our study predicts how plant susceptibility to herbivory depends on the composition of the herbivore community and the level of plant competition, and highlights the importance of considering the full range of dynamics in plant–plant–herbivore interactions. PMID:29373660

Synthesis and phase behavior of end-functionalized associating polymers

NASA Astrophysics Data System (ADS)

Wrue, Michelle H.

We have explored polymer blend phase behavior in the presence of multiple hydrogen bonding end-groups. This work details the synthesis of functionalized polymers and their subsequent use in miscibility studies. The synthesis of end-functionalized hydrogen bonding polymers and the investigation of their physical properties and miscibility is presented. Mono-functional and telechelic ureidopyrimidinone (UPy) functionalized polymers were prepared by two main routes: post-polymerization functionalization (of commercially available or synthesized polymers); and polymerization of monomers using a functionalized initiator. UPy-functionalized polymers were prepared with a variety of polymer backbones including poly(ethylene oxide)s; poly(butadiene)s, poly(dimethyl siloxanxe)s; poly(styrene)s and poly(methyl methacrylate)s. The most successful route to polymers with UPy end-groups was atom transfer radical polymerization (ATRP) using a UPy-functionalized initiator, followed by atom transfer radical coupling (ATRC). The incorporation of ureidopyrimidinone end-groups was shown to affect the physical properties of the polymer backbone. Parent polymers that were liquids became viscous liquids or waxy solids upon UPy-functionalization of chain end. UPy-functionalization of a hydroxyl-terminated polybutadiene (HO-PB-OH) resulted in a waxy solid while the HO-PB-OH precursor was a viscous liquid. The thermal properties of functionalized polymers also differed from those of the unfunctionalized parent polymers. Hot-stage optical microscopy revealed that UPy-functionalized PEO displayed a depressed melting point relative to the analogous unfunctionalized precursor. Differential scanning calorimetry was also used to investigate the synthesized UPy-polymers. UPy-functionalized polystyrenes and poly(methyl methacrylate)s showed an increased T g compared to the equivalent homopolymer standards. This increased Tg was determined to be dependent upon the fraction of UPy groups present and chemical cleavage of the end-groups resulted in Tgs near those observed for polymer standards of comparable molecular weight. Aggregation of UPy end-groups in solution was observed using gel permeation chromatography. Aggregation was only observed for telechelic samples of low molecular weight, indicating that the aggregation of end-groups is dependent upon the concentration of the end-groups. The effect of UPy end-groups on blend miscibility was studied in solution using laser light scattering and in the melt state was using laser light scattering, optical microscopy and differential scanning calorimetry. The incorporation of associating groups onto one end of either blend component decreases miscibility relative to unfunctionalized parent blends. Lower miscibility was also observed for blends in which both components were mono-functionalized with associating end-groups. The largest decrease in miscibility was observed for blends containing telechelic UPy-functionalized polymers, which were immiscible across the entire composition range.

Quantifying chain reptation in entangled polymer melts: Topological and dynamical mapping of atomistic simulation results onto the tube model

NASA Astrophysics Data System (ADS)

Stephanou, Pavlos S.; Baig, Chunggi; Tsolou, Georgia; Mavrantzas, Vlasis G.; Kröger, Martin

2010-03-01

The topological state of entangled polymers has been analyzed recently in terms of primitive paths which allowed obtaining reliable predictions of the static (statistical) properties of the underlying entanglement network for a number of polymer melts. Through a systematic methodology that first maps atomistic molecular dynamics (MD) trajectories onto time trajectories of primitive chains and then documents primitive chain motion in terms of a curvilinear diffusion in a tubelike region around the coarse-grained chain contour, we are extending these static approaches here even further by computing the most fundamental function of the reptation theory, namely, the probability ψ(s,t) that a segment s of the primitive chain remains inside the initial tube after time t, accounting directly for contour length fluctuations and constraint release. The effective diameter of the tube is independently evaluated by observing tube constraints either on atomistic displacements or on the displacement of primitive chain segments orthogonal to the initial primitive path. Having computed the tube diameter, the tube itself around each primitive path is constructed by visiting each entanglement strand along the primitive path one after the other and approximating it by the space of a small cylinder having the same axis as the entanglement strand itself and a diameter equal to the estimated effective tube diameter. Reptation of the primitive chain longitudinally inside the effective constraining tube as well as local transverse fluctuations of the chain driven mainly from constraint release and regeneration mechanisms are evident in the simulation results; the latter causes parts of the chains to venture outside their average tube surface for certain periods of time. The computed ψ(s,t) curves account directly for both of these phenomena, as well as for contour length fluctuations, since all of them are automatically captured in the atomistic simulations. Linear viscoelastic properties such as the zero shear rate viscosity and the spectra of storage and loss moduli obtained on the basis of the obtained ψ(s,t) curves for three different polymer melts (polyethylene, cis-1,4-polybutadiene, and trans-1,4-polybutadiene) are consistent with experimental rheological data and in qualitative agreement with the double reptation and dual constraint models. The new methodology is general and can be routinely applied to analyze primitive path dynamics and chain reptation in atomistic trajectories (accumulated through long MD simulations) of other model polymers or polymeric systems (e.g., bidisperse, branched, grafted, etc.); it is thus believed to be particularly useful in the future in evaluating proposed tube models and developing more accurate theories for entangled systems.

Heterogeneity of sleep quality in relation to circadian preferences and depressive symptomatology among major depressive patients.

PubMed

Selvi, Yavuz; Boysan, Murat; Kandeger, Ali; Uygur, Omer F; Sayin, Ayca A; Akbaba, Nursel; Koc, Basak

2018-08-01

The current study aimed at investigating the latent dimensional structure of sleep quality as indexed by the seven components of the Pittsburgh Sleep Quality Index (PSQI), as well as latent covariance structure between sleep quality, circadian preferences and depressive symptoms. Two hundred twenty-five patients with major depressive disorder (MDD), with an average age of 29.92 ± 10.49 years (aged between 17 and 63), participated in the study. The PSQI, Morningness-Eveningness Questionnaire (MEQ) and Beck Depression Inventory (BDI) were administered to participants. Four sets of latent class analyses were subsequently run to obtain optimal number of latent classes best fit to the data. Mixture models revealed that sleep quality is multifaceted in MDD. The data best fit to four-latent-class model: Poor Habitual Sleep Quality (PHSQ), Poor Subjective Sleep Quality (PSSQ), Intermediate Sleep Quality (ISQ), and Good Sleep Quality (GSQ). MDD patients classified into GSQ latent class (23.6%) reported the lowest depressive symptoms and were more prone to morningness diurnal preferences compared to other three homogenous sub-groups. Finally, the significant association between eveningness diurnal preferences and depressive symptomatology was significantly mediated by poor sleep quality. The cross-sectional nature of the study and the lack of an objective measurement of sleep such as polysomnography recordings was the most striking limitation of the study. We concluded sleep quality in relation to circadian preferences and depressive symptoms has a heterogeneous nature in MDD. Copyright © 2018. Published by Elsevier B.V.

Solution structure and thermodynamics of 2',5' RNA intercalation.

PubMed

Horowitz, Eric D; Lilavivat, Seth; Holladay, Benjamin W; Germann, Markus W; Hud, Nicholas V

2009-04-29

As a means to explore the influence of the nucleic acid backbone on the intercalative binding of ligands to DNA and RNA, we have determined the solution structure of a proflavine-bound 2',5'-linked octamer duplex with the sequence GCCGCGGC. This structure represents the first NMR structure of an intercalated RNA duplex, of either backbone structural isomer. By comparison with X-ray crystal structures, we have identified similarities and differences between intercalated 3',5' and 2',5'-linked RNA duplexes. First, the two forms of RNA have different sugar pucker geometries at the intercalated nucleotide steps, yet have the same interphosphate distances. Second, as in intercalated 3',5' RNA, the phosphate backbone angle zeta at the 2',5' RNA intercalation site prefers to be in the trans conformation, whereas unintercalated 2',5' and 3',5' RNA prefer the -gauche conformation. These observations provide new insights regarding the transitions required for intercalation of a phosphodiester-ribose backbone and suggest a possible contribution of the backbone to the origin of the nearest-neighbor exclusion principle. Thermodynamic studies presented for intercalation of both structural RNA isomers also reveal a surprising sensitivity of intercalator binding enthalpy and entropy to the details of RNA backbone structure.

Structure and Dynamical Influence of Water Vapor in the Lower Tropical Troposphere

NASA Astrophysics Data System (ADS)

Stevens, Bjorn; Brogniez, Hélène; Kiemle, Christoph; Lacour, Jean-Lionel; Crevoisier, Cyril; Kiliani, Johannes

In situ, airborne and satellite measurements are used to characterize the structure of water vapor in the lower tropical troposphere—below the height, z *, of the triple-point isotherm, T *. The measurements are evaluated in light of understanding of how lowertropospheric water vapor influences clouds, convection and circulation, through both radiative and thermodynamic effects. Lower-tropospheric water vapor, which concentrates in the first few kilometers above the boundary layer, controls the radiative cooling profile of the boundary layer and lower troposphere. Elevated moist layers originating from a preferred level of convective detrainment induce a profile of radiative cooling that drives circulations which reinforce such features. A theory for this preferred level of cumulus termination is advanced, whereby the difference between T * and the temperature at which primary ice forms gives a `first-mover advantage' to glaciating cumulus convection, thereby concentrating the regions of the deepest convection and leading to more clouds and moisture near the triple point. A preferred level of convective detrainment near T * implies relative humidity reversals below z * which are difficult to identify using retrievals from satellite-borne microwave and infrared sounders. Isotopologues retrievals provide a hint of such features and their ability to constrain the structure of the vertical humidity profile merits further study. Nonetheless, it will likely remain challenging to resolve dynamically important aspects of the vertical structure of water vapor from space using only passive sensors.

Competitive Interactions between Invasive Nile Tilapia and Native Fish: The Potential for Altered Trophic Exchange and Modification of Food Webs

PubMed Central

Martin, Charles W.; Valentine, Marla M.; Valentine, John F.

2010-01-01

Recent studies have highlighted both the positive and negative impacts of species invasions. Most of these studies have been conducted on either immobile invasive plants or sessile fauna found at the base of food webs. Fewer studies have examined the impacts of vagile invasive consumers on native competitors. This is an issue of some importance given the controlling influence that consumers have on lower order plants and animals. Here, we present results of laboratory experiments designed to assess the impacts of unintended aquaculture releases of the Nile tilapia (Oreochromis niloticus), in estuaries of the Gulf of Mexico, on the functionally similar redspotted sunfish (Lepomis miniatus). Laboratory choice tests showed that tilapia prefer the same structured habitat that native sunfish prefer. In subsequent interspecific competition experiments, agonistic tilapia displaced sunfish from their preferred structured habitats. When a piscivore (largemouth bass) was present in the tank with both species, the survival of sunfish decreased. Based on these findings, if left unchecked, we predict that the proliferation of tilapia (and perhaps other aggressive aquaculture fishes) will have important detrimental effects on the structure of native food webs in shallow, structured coastal habitats. While it is likely that the impacts of higher trophic level invasive competitors will vary among species, these results show that consequences of unintended releases of invasive higher order consumers can be important. PMID:21200433

Structure and Dynamical Influence of Water Vapor in the Lower Tropical Troposphere

NASA Astrophysics Data System (ADS)

Stevens, Bjorn; Brogniez, Hélène; Kiemle, Christoph; Lacour, Jean-Lionel; Crevoisier, Cyril; Kiliani, Johannes

2017-11-01

In situ, airborne and satellite measurements are used to characterize the structure of water vapor in the lower tropical troposphere—below the height, z_*, of the triple-point isotherm, T_*. The measurements are evaluated in light of understanding of how lower-tropospheric water vapor influences clouds, convection and circulation, through both radiative and thermodynamic effects. Lower-tropospheric water vapor, which concentrates in the first few kilometers above the boundary layer, controls the radiative cooling profile of the boundary layer and lower troposphere. Elevated moist layers originating from a preferred level of convective detrainment induce a profile of radiative cooling that drives circulations which reinforce such features. A theory for this preferred level of cumulus termination is advanced, whereby the difference between T_* and the temperature at which primary ice forms gives a `first-mover advantage' to glaciating cumulus convection, thereby concentrating the regions of the deepest convection and leading to more clouds and moisture near the triple point. A preferred level of convective detrainment near T_* implies relative humidity reversals below z* which are difficult to identify using retrievals from satellite-borne microwave and infrared sounders. Isotopologues retrievals provide a hint of such features and their ability to constrain the structure of the vertical humidity profile merits further study. Nonetheless, it will likely remain challenging to resolve dynamically important aspects of the vertical structure of water vapor from space using only passive sensors.

Permanent magnet design for high-speed superconducting bearings

DOEpatents

Hull, John R.; Uherka, Kenneth L.; Abdoud, Robert G.

1996-01-01

A high temperature superconducting bearing including a permanent magnet rotor levitated by a high temperature superconducting structure. The rotor preferably includes one or more concentric permanent magnet rings coupled to permanent magnet ring structures having substantially triangular and quadrangular cross-sections. Both alternating and single direction polarity magnet structures can be used in the bearing.

Virtual Learning and Instructional Tools: Perfecting the Weekly Roadmap

ERIC Educational Resources Information Center

Cicco, Gina

2015-01-01

This article will provide details on the importance of providing structure within an online graduate counseling course in the form of a weekly roadmap tool. There are various instructional tools that may be useful in providing students with differing levels of structure, to meet their learning style preferences for structural stimuli (Cicco,…

Development of magnetic and elastic anisotropies in slates during progressive deformation

NASA Astrophysics Data System (ADS)

Hrouda, František; Pros, Zdeněk; Wohlgemuth, Jiří

1993-05-01

Magnetic and elastic anisotropies were investigated in rocks of the Nízký Jeseník Mountains (northeast Bohemian Massif) ranging in lithology from almost unmetamorphosed sediments, through slate, to phyllite, and showing a range of structural styles from sedimentary, through spaced and slaty cleavage, to metamorphic schistosity. In unmetamorphosed and undeformed sedimentary rocks, both the anisotropies display close relationships to the sedimentary fabric. During the development of the spaced and slaty cleavage they are gradually re-oriented into the attitudes of the deformational fabrics, and in the rocks with metamorphic schistosity they are fully related to the deformational fabric elements, which can be oriented in a very different way from the original sedimentary structures. The magnetic anisotropy is mostly due to the preferred orientation of phyllosilicates generated during very weak regional metamorphism, and subordinately due to the preferred orientation of magnetite. The elastic anisotropy is probably controlled by the preferred orientation of phyllosilicates and by the existence of oriented systems of microcracks.

Nest site characteristics of three coexisting Accipiter hawks in northeastern Oregon

USGS Publications Warehouse

Moore, K.R.; Henny, C.J.

1983-01-01

Habitat data were evaluated at 34 Goshawk (Accipiter gentilis), 31 Cooper's Hawk (A. cooperii), and 15 Sharp-shinned Hawk (A. striatus) nest sites in coniferous forests of northeastern Oregon. Crown volume profiles indicate a strong similarity in vegetative structure at nest sites of cooperii and striatus; both commonly nest in younger successional stands than gentilis. Habitat separation of nest sites among the three species was illustrated using a stepwise discriminant analysis; 88% of all gentilis sites were correctly classified. Interspecific overlap in nest site habitat was further demonstrated using a canonical analysis of habitat variables. Nest site habitat space of gentilis is distinct and is less variable in structure than that of the other species. Cooperii preferred nesting sites with norhern aspects, whereas striatus and gentilis showed no preference. The use of mistletoe (Arceuthobium sp.) growth by cooperii for nest platforms (64% of all nests) may explain its preference for Douglas fir (Pseudotsuga menziesii) as a nesting tree. Douglas fir is most commonly parasitized by mistletoe.

Intergenerational relations and elder care preferences of Asian Indians in North Carolina.

PubMed

Sudha, S

2014-03-01

The US older population is growing in ethnic diversity. Persistent ethnic disparities in service use among seniors are linked to structural barriers to access, and also to family processes such as cultural preferences and intergenerational relations. There is sparse information on the latter issue for immigrant ethnic minority seniors. Information on the Asian group (the fastest growing senior sub-population) is extremely scarce, due to this group's diversity in national, linguistic, and cultural origins. We conducted a qualitative study among community-dwelling Asian Indian families (including at least one member aged 60 years and older) in North Carolina to examine preferences of seniors and the midlife generation regarding elder care, and the role of intergenerational relations in desired care for elders, exploring the theoretical perspective of intergenerational relationship ambivalence. Our results suggest that cultural preferences, ambivalence in intergenerational relations, and regulations on health service eligibility among immigrant/transnational seniors and midlife adults influence preferences for elder care.

Impact of discussion on preferences elicited in a group setting.

PubMed

Stein, Ken; Ratcliffe, Julie; Round, Ali; Milne, Ruairidh; Brazier, John E

2006-03-29

The completeness of preferences is assumed as one of the axioms of expected utility theory but has been subject to little empirical study. Fifteen non-health professionals was recruited and familiarised with the standard gamble technique. The group then met five times over six months and preferences were elicited independently on 41 scenarios. After individual valuation, the group discussed the scenarios, following which preferences could be changed. Changes made were described and summary measures (mean and median) before and after discussion compared using paired t test and Wilcoxon Signed Rank Test. Semi-structured telephone interviews were carried out to explore attitudes to discussing preferences. These were transcribed, read by two investigators and emergent themes described. Sixteen changes (3.6%) were made to preferences by seven (47%) of the fifteen members. The difference between individual preference values before and after discussion ranged from -0.025 to 0.45. The average effect on the group mean was 0.0053. No differences before and after discussion were statistically significant. The group valued discussion highly and suggested it brought four main benefits: reassurance; improved procedural performance; increased group cohesion; satisfying curiosity. The hypothesis that preferences are incomplete cannot be rejected for a proportion of respondents. However, brief discussion did not result in substantial number of changes to preferences and these did not have significant impact on summary values for the group, suggesting that incompleteness, if present, may not have an important effect on cost-utility analyses.

Carpal tunnel syndrome: assessment of surgeon and patient preferences and priorities for decision-making.

PubMed

Hageman, Michiel G J S; Kinaci, Ahmet; Ju, Kevin; Guitton, Thierry G; Mudgal, Chaitanya S; Ring, David

2014-09-01

This study tested the null hypothesis that there are no differences between the preferences of hand surgeons and those patients with carpal tunnel syndrome (CTS) facing decisions about management of CTS (ie, the preferred content of a decision aid). One hundred three hand surgeons of the Science of Variation Group and 79 patients with CTS completed a survey about their priorities and preferences in decision making regarding the management of CTS. The questionnaire was structured according the Ottawa Decision Support Framework for the development of a decision aid. Important areas on which patient and hand surgeon interests differed included a preference for nonpainful, nonoperative treatment and confirmation of the diagnosis with electrodiagnostic testing. For patients, the main disadvantage of nonoperative treatment was that it was likely to be only palliative and temporary. Patients preferred, on average, to take the lead in decision making, whereas physicians preferred shared decision making. Patients and physicians agreed on the value of support from family and other physicians in the decision-making process. There were some differences between patient and surgeon priorities and preferences regarding decision making for CTS, particularly the risks and benefits of diagnostic and therapeutic procedures. Information that helps inform patients of their options based on current best evidence might help patients understand their own preferences and values, reduce decisional conflict, limit surgeon-to-surgeon variations, and improve health. Copyright © 2014 American Society for Surgery of the Hand. All rights reserved.

Examining chronic care patient preferences for involvement in health-care decision making: the case of Parkinson's disease patients in a patient-centred clinic.

PubMed

Zizzo, Natalie; Bell, Emily; Lafontaine, Anne-Louise; Racine, Eric

2017-08-01

Patient-centred care is a recommended model of care for Parkinson's disease (PD). It aims to provide care that is respectful and responsive to patient preferences, values and perspectives. Provision of patient-centred care should entail considering how patients want to be involved in their care. To understand the participation preferences of patients with PD from a patient-centred care clinic in health-care decision-making processes. Mixed-methods study with early-stage Parkinson's disease patients from a patient-centred care clinic. Study involved a modified Autonomy Preference Index survey (N=65) and qualitative, semi-structured in-depth interviews, analysed using thematic qualitative content analysis (N=20, purposefully selected from survey participants). Interviews examined (i) the patient preferences for involvement in health-care decision making; (ii) patient perspectives on the patient-physician relationship; and (iii) patient preferences for communication of information relevant to decision making. Preferences for participation in decision making varied between individuals and also within individuals depending on decision type, relational and contextual factors. Patients had high preferences for communication of information, but with acknowledged limits. The importance of communication in the patient-physician relationship was emphasized. Patient preferences for involvement in decision making are dynamic and support shared decision making. Relational autonomy corresponds to how patients envision their participation in decision making. Clinicians may need to assess patient preferences on an on-going basis. Our results highlight the complexities of decision-making processes. Improved understanding of individual preferences could enhance respect for persons and make for patient-centred care that is truly respectful of individual patients' wants, needs and values. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

The concurrent evolution of cooperation and the population structures that support it.

PubMed

Powers, Simon T; Penn, Alexandra S; Watson, Richard A

2011-06-01

The evolution of cooperation often depends upon population structure, yet nearly all models of cooperation implicitly assume that this structure remains static. This is a simplifying assumption, because most organisms possess genetic traits that affect their population structure to some degree. These traits, such as a group size preference, affect the relatedness of interacting individuals and hence the opportunity for kin or group selection. We argue that models that do not explicitly consider their evolution cannot provide a satisfactory account of the origin of cooperation, because they cannot explain how the prerequisite population structures arise. Here, we consider the concurrent evolution of genetic traits that affect population structure, with those that affect social behavior. We show that not only does population structure drive social evolution, as in previous models, but that the opportunity for cooperation can in turn drive the creation of population structures that support it. This occurs through the generation of linkage disequilibrium between socio-behavioral and population-structuring traits, such that direct kin selection on social behavior creates indirect selection pressure on population structure. We illustrate our argument with a model of the concurrent evolution of group size preference and social behavior. © 2011 The Author(s). Evolution© 2011 The Society for the Study of Evolution.

Assessing public aesthetic preferences towards some urban landscape patterns: the case study of two different geographic groups.

PubMed

Chen, Ziyue; Xu, Bing; Devereux, Bernard

2016-01-01

Landscape aesthetics is closely linked to people's daily life, and a large body of studies has been conducted to understand the public's landscape preferences. These studies commonly focused on comprehensive landscape configuration, yet limited emphasis was placed on the patterns of individual landscape features. This research explored people's preferences towards the composition and patterns of some specific urban features. Questionnaire-based survey was conducted in two cities: Cambridge, UK and Nanjing, China and more than 180 responses were collected, respectively. Respondents from both sites showed similar preferences towards freely growing trees, individual houses, gable roofs and mixed design of green spaces. On the other hand, respondents from Cambridge and Nanjing have different preferences towards the height of trees, the size of green spaces, and the height diversity of buildings. This survey also proved that the factors of age, education, status and length of living have larger influences on landscape preferences than the factors of gender, and major. Furthermore, strong correlations were found between people's aesthetic preferences towards comparative landscape patterns, building types, tree shapes and roof structures. The existence of generally shared landscape preferences makes it feasible to conduct international and standardized projects for acquiring comparable and transferable criteria. The methodology and findings of this research provides landscape planners and decision makers with useful reference to compare, evaluate and improve urban landscape configurations to meet people's needs.

The learning style preferences of chiropractic students: A cross-sectional study

PubMed Central

Whillier, Stephney; Lystad, Reidar P.; Abi-Arrage, David; McPhie, Christopher; Johnston, Samara; Williams, Christopher; Rice, Mark

2014-01-01

Objective The aims of our study were to measure the learning style preferences of chiropractic students and to assess whether they differ across the 5 years of chiropractic study. Methods A total of 407 (41.4% females) full-degree, undergraduate, and postgraduate students enrolled in an Australian chiropractic program agreed to participate in a cross-sectional survey comprised of basic demographic information and the Visual, Aural, Read/Write, Kinesthetic (VARK) questionnaire, which identifies learning preferences on four different subscales: visual, aural, reading/writing, and kinesthetic. Multivariate analysis of variance and the χ2 test were used to check for differences in continuous (VARK scores) and categorical (VARK category preference) outcome variables. Results The majority of chiropractic students (56.0%) were found to be multimodal learners. Compared to the other learning styles preferences, kinesthetic learning was preferred by a significantly greater proportion of students (65.4%, p < .001) and received a significantly greater mean VARK score (5.66 ± 2.47, p < .001). Conclusions To the best of our knowledge, this is the first time chiropractic students have been shown to be largely multimodal learners with a preference for kinesthetic learning. While this knowledge may be beneficial in the structuring of future curricula, more thorough research must be conducted to show any beneficial relationship between learning style preferences and teaching methods. PMID:24350945

Landscape Preferences, Amenity, and Bushfire Risk in New South Wales, Australia.

PubMed

Gill, Nicholas; Dun, Olivia; Brennan-Horley, Chris; Eriksen, Christine

2015-09-01

This paper examines landscape preferences of residents in amenity-rich bushfire-prone landscapes in New South Wales, Australia. Insights are provided into vegetation preferences in areas where properties neighbor large areas of native vegetation, such as national parks, or exist within a matrix of cleared and vegetated private and public land. In such areas, managing fuel loads in the proximity of houses is likely to reduce the risk of house loss and damage. Preferences for vegetation appearance and structure were related to varying fuel loads, particularly the density of understorey vegetation and larger trees. The study adopted a qualitative visual research approach, which used ranking and photo-elicitation as part of a broader interview. A visual approach aids in focusing on outcomes of fuel management interventions, for example, by using the same photo scenes to firstly derive residents' perceptions of amenity and secondly, residents' perceptions of bushfire risk. The results are consistent with existing research on landscape preferences; residents tend to prefer relatively open woodland or forest landscapes with good visual and physical access but with elements that provoke their interest. Overall, residents' landscape preferences were found to be consistent with vegetation management that reduces bushfire risk to houses. The terms in which preferences were expressed provide scope for agency engagement with residents in order to facilitate management that meets amenity and hazard reduction goals on private land.

Structural Basis for the ABO Blood-Group Dependence of Plasmodium falciparum Rosetting

PubMed Central

Hessel, Audrey; Raynal, Bertrand; England, Patrick; Cohen, Jacques H.; Bertrand, Olivier; Peyrard, Thierry; Bentley, Graham A.; Lewit-Bentley, Anita; Mercereau-Puijalon, Odile

2012-01-01

The ABO blood group influences susceptibility to severe Plasmodium falciparum malaria. Recent evidence indicates that the protective effect of group O operates by virtue of reduced rosetting of infected red blood cells (iRBCs) with uninfected RBCs. Rosetting is mediated by a subgroup of PfEMP1 adhesins, with RBC binding being assigned to the N-terminal DBL1α1 domain. Here, we identify the ABO blood group as the main receptor for VarO rosetting, with a marked preference for group A over group B, which in turn is preferred to group O RBCs. We show that recombinant NTS-DBL1α1 and NTS-DBL1α1-CIDR1γ reproduce the VarO-iRBC blood group preference and document direct binding to blood group trisaccharides by surface plasmon resonance. More detailed RBC subgroup analysis showed preferred binding to group A1, weaker binding to groups A2 and B, and least binding to groups Ax and O. The 2.8 Å resolution crystal structure of the PfEMP1-VarO Head region, NTS-DBL1α1-CIDR1γ, reveals extensive contacts between the DBL1α1 and CIDR1γ and shows that the NTS-DBL1α1 hinge region is essential for RBC binding. Computer docking of the blood group trisaccharides and subsequent site-directed mutagenesis localized the RBC-binding site to the face opposite to the heparin-binding site of NTS-DBLα1. RBC binding involves residues that are conserved between rosette-forming PfEMP1 adhesins, opening novel opportunities for intervention against severe malaria. By deciphering the structural basis of blood group preferences in rosetting, we provide a link between ABO blood grouppolymorphisms and rosette-forming adhesins, consistent with the selective role of falciparum malaria on human genetic makeup. PMID:22807674

Who Chooses Incentivized Pay Structures? Exploring the Link between Performance and Preferences for Compensation Reform in the Teacher Labor Market. CEDR Working Paper. WP #2014-­8

ERIC Educational Resources Information Center

Goldhaber, Dan; Bignell, Wes; Farley, Amy; Walch, Joe; Cowan, James

2014-01-01

In this paper we report on research examining the revealed preferences of teachers in Denver Public Schools who were given the opportunity to select between remaining on a traditional salary schedule or opting in to one of the nation's highest profile pay reform systems, Denver's Professional Compensation System for Teachers. The incentive…

Comparative analysis of barophily-related amino acid content in protein domains of Pyrococcus abyssi and Pyrococcus furiosus.

PubMed

Yafremava, Liudmila S; Di Giulio, Massimo; Caetano-Anollés, Gustavo

2013-01-01

Amino acid substitution patterns between the nonbarophilic Pyrococcus furiosus and its barophilic relative P. abyssi confirm that hydrostatic pressure asymmetry indices reflect the extent to which amino acids are preferred by barophilic archaeal organisms. Substitution patterns in entire protein sequences, shared protein domains defined at fold superfamily level, domains in homologous sequence pairs, and domains of very ancient and very recent origin now provide further clues about the environment that led to the genetic code and diversified life. The pyrococcal proteomes are very similar and share a very early ancestor. Relative amino acid abundance analyses showed that biases in the use of amino acids are due to their shared fold superfamilies. Within these repertoires, only two of the five amino acids that are preferentially barophilic, aspartic acid and arginine, displayed this preference significantly and consistently across structure and in domains appearing in the ancestor. The more primordial asparagine, lysine and threonine displayed a consistent preference for nonbarophily across structure and in the ancestor. Since barophilic preferences are already evident in ancient domains that are at least ~3 billion year old, we conclude that barophily is a very ancient trait that unfolded concurrently with genetic idiosyncrasies in convergence towards a universal code.

EEG Spectral Dynamics of Video Commercials: Impact of the Narrative on the Branding Product Preference

PubMed Central

Wang, Regina W. Y.; Chang, Yu-Ching; Chuang, Shang-Wen

2016-01-01

Neuromarketing has become popular and received a lot of attention. The quality of video commercials and the product information they convey to consumers is a hotly debated topic among advertising agencies and product advertisers. This study explored the impact of advertising narrative and the frequency of branding product exposures on the preference for the commercial and the branding product. We performed electroencephalography (EEG) experiments on 30 subjects while they watched video commercials. The behavioral data indicated that commercials with a structured narrative and containing multiple exposures of the branding products had a positive impact on the preference for the commercial and the branding product. The EEG spectral dynamics showed that the narratives of video commercials resulted in higher theta power of the left frontal, bilateral occipital region, and higher gamma power of the limbic system. The narratives also induced significant cognitive integration-related beta and gamma power of the bilateral temporal regions and the parietal region. It is worth noting that the video commercials with a single exposure of the branding products would be indicators of attention. These new findings suggest that the presence of a narrative structure in video commercials has a critical impact on the preference for branding products. PMID:27819348

Can We Finish the Revolution? Gender, Work-Family Ideals, and Institutional Constraint.

PubMed

Pedulla, David S; Thébaud, Sarah

2015-02-01

Why has progress toward gender equality in the workplace and at home stalled in recent decades? A growing body of scholarship suggests that persistently gendered workplace norms and policies limit men's and women's ability to create gender egalitarian relationships at home. In this article, we build on and extend prior research by examining the extent to which institutional constraints, including workplace policies, affect young, unmarried men's and women's preferences for their future work-family arrangements. We also examine how these effects vary across levels of education. Drawing on original survey-experimental data, we ask respondents how they would like to structure their future relationships while experimentally manipulating the degree of institutional constraint under which they state their preferences. Two clear patterns emerge. First, as constraints are removed and men and women can opt for an egalitarian relationship, the majority of them choose this option, regardless of gender or education level. Second, women's relationship structure preferences are more malleable to the removal of institutional constraints via supportive work-family policy interventions than are men's. These findings shed light on important questions about the role of institutions in shaping work-family preferences, underscoring the notion that seemingly gender-traditional work-family decisions are largely contingent on the constraints of current workplaces.

Can We Finish the Revolution? Gender, Work-Family Ideals, and Institutional Constraint

PubMed Central

Pedulla, David S.; Thébaud, Sarah

2015-01-01

Why has progress toward gender equality in the workplace and at home stalled in recent decades? A growing body of scholarship suggests that persistently gendered workplace norms and policies limit men's and women's ability to create gender egalitarian relationships at home. In this article, we build on and extend prior research by examining the extent to which institutional constraints, including workplace policies, affect young, unmarried men's and women's preferences for their future work-family arrangements. We also examine how these effects vary across levels of education. Drawing on original survey-experimental data, we ask respondents how they would like to structure their future relationships while experimentally manipulating the degree of institutional constraint under which they state their preferences. Two clear patterns emerge. First, as constraints are removed and men and women can opt for an egalitarian relationship, the majority of them choose this option, regardless of gender or education level. Second, women's relationship structure preferences are more malleable to the removal of institutional constraints via supportive work-family policy interventions than are men's. These findings shed light on important questions about the role of institutions in shaping work-family preferences, underscoring the notion that seemingly gender-traditional work-family decisions are largely contingent on the constraints of current workplaces. PMID:26365994

EEG Spectral Dynamics of Video Commercials: Impact of the Narrative on the Branding Product Preference.

PubMed

Wang, Regina W Y; Chang, Yu-Ching; Chuang, Shang-Wen

2016-11-07

Neuromarketing has become popular and received a lot of attention. The quality of video commercials and the product information they convey to consumers is a hotly debated topic among advertising agencies and product advertisers. This study explored the impact of advertising narrative and the frequency of branding product exposures on the preference for the commercial and the branding product. We performed electroencephalography (EEG) experiments on 30 subjects while they watched video commercials. The behavioral data indicated that commercials with a structured narrative and containing multiple exposures of the branding products had a positive impact on the preference for the commercial and the branding product. The EEG spectral dynamics showed that the narratives of video commercials resulted in higher theta power of the left frontal, bilateral occipital region, and higher gamma power of the limbic system. The narratives also induced significant cognitive integration-related beta and gamma power of the bilateral temporal regions and the parietal region. It is worth noting that the video commercials with a single exposure of the branding products would be indicators of attention. These new findings suggest that the presence of a narrative structure in video commercials has a critical impact on the preference for branding products.

Mommy markets: Racial differences in lesbians' dating preferences for women with children.

PubMed

Rafalow, Matthew H; Kizer, Jessica M

2017-11-22

Recent work shows that race is a critical factor in shaping sexual identities, partner preference, and family formation, suggesting there may be racial differences in whether lesbians already have children at the time that they look for companions. In this study, we draw on a sample of 1,923 lesbians on Match.com to quantitatively test whether there are racial differences in dating preferences for women with children, underscoring implications for family inequality through racial differences in who has children when looking for a partner. We find that Blacks, Latinas, and Asians are more likely than Whites to not only have children but also be open to dating other women with children. This suggests that race differentially structures lesbians' openness to partners with children, and such preferences may be a possible mechanism for racial stratification.

Specificity in Sociality: Mice and Prairie Voles Exhibit Different Patterns of Peer Affiliation

PubMed Central

Beery, Annaliese K.; Christensen, Jennifer D; Lee, Nicole S.; Blandino, Katrina L.

2018-01-01

Social behavior is often described as a unified concept, but highly social (group-living) species exhibit distinct social structures and may make different social decisions. Prairie voles (Microtus ochrogaster) are socially monogamous rodents that often reside in extended family groups, and exhibit robust preferences for familiar social partners (same- and opposite-sex) during extended choice tests, although short-term preferences are not known. Mice (Mus musculus) are gregarious and colonial, but in brief laboratory tests of social preference they typically prefer social novelty. This preference for novel vs. familiar peers may represent a species-specific difference in social decision-making between mice and prairie voles. However, the tests used to measure preferences in each species differ markedly in duration and degree of contact, such that the behaviors cannot be directly compared. We assessed whether social preferences for novelty or familiarity differed between mice and prairie voles of both sexes when assessed with matching protocols: the sociability/social preference test (SPT) typically used in mice (short, no direct contact), and the partner preference test (PPT) used in voles (long, direct contact). A subset of voles also underwent a PPT using barriers (long, no direct contact). In the short SPT, behavior did not differ between species. In the longer test, pronounced partner preferences emerged in prairie voles, but mice exhibited no social preferences and rarely huddled. No sex differences were evident in either test. Direct physical contact was required for partner preferences in huddling time in voles, but preference for the partner chamber was evident with or without contact. Both prairie voles and mice are social, but they exhibit important differences in the specificity and extent of their social behavior. While mice are often used to study social approach and other behaviors, voles are a more suitable species for the study of selective social relationships. Consideration of these differences will be important for studies examining the neural mechanisms supporting different kinds of peer social behavior. PMID:29615879

Ludic Elicitation: Using Games for Knowledge Elicitation

ERIC Educational Resources Information Center

Cao, Yan

2014-01-01

Knowledge elicitation from human beings is important for many fields, such as decision support systems, risk communication, and customer preference studying. Traditional approaches include observations, questionnaires, structured and semi-structured interviews, and group discussions. Many publications have been studying different techniques for a…

Feasibility of using shape memory alloys to develop self post-tensioned concrete bridge girders.

DOT National Transportation Integrated Search

2013-08-01

Post-tensioned (PT) structural elements are used quite often in bridges due to their ability to span long widths : economically while providing an aesthetically pleasing structure. PT systems are also preferred in bridge construction : because they g...

Even in Public Television, Ownership Changes Matter.

ERIC Educational Resources Information Center

Lashley, Marilyn E.

1992-01-01

Shows that executive turnover through four administrations (1967-89) has kept public broadcasting mired in budgetary crises, transforming its goals, structure, and programing content over time. Describes policy preferences imposed by administrators, identifies attendant modifications in organizational structure, and delineates effects of these…

Uncertainty of Comparative Judgments and Multidimensional Structure

ERIC Educational Resources Information Center

Sjoberg, Lennart

1975-01-01

An analysis of preferences with respect to silhouette drawings of nude females is presented. Systematic intransitivities were discovered. The dispersions of differences (comparatal dispersons) were shown to reflect the multidimensional structure of the stimuli, a finding expected on the basis of prior work. (Author)

Different Strokes for Different Folks: Jung's Typology and Structured Experiences.

ERIC Educational Resources Information Center

Haber, Russell Alan

1980-01-01

Examined and compared the evaluations of students differentiated by Carl Jung's psychotypology when they were involved in either a session of nonverbal communication experiences or a session of fantasy experiences. Some of the Jungian psychological types preferred different structured experiences. (Author)

Structural Priming and Frequency Effects Interact in Chinese Sentence Comprehension

PubMed Central

Wei, Hang; Dong, Yanping; Boland, Julie E.; Yuan, Fang

2016-01-01

Previous research in several European languages has shown that the language processing system is sensitive to both structural frequency and structural priming effects. However, it is currently not clear whether these two types of effects interact during online sentence comprehension, especially for languages that do not have morphological markings. To explore this issue, the present study investigated the possible interplay between structural priming and frequency effects for sentences containing the Chinese ambiguous construction V NP1 de NP2 in a self-paced reading experiment. The sentences were disambiguated to either the more frequent/preferred NP structure or the less frequent VP structure. Each target sentence was preceded by a prime sentence of three possible types: NP primes, VP primes, and neutral primes. When the ambiguous construction V NP1 de NP2 was disambiguated to the dispreferred VP structure, participants experienced more processing difficulty following an NP prime relative to following a VP prime or a neutral baseline. When the ambiguity was resolved to the preferred NP structure, prime type had no effect. These results suggest that structural priming in comprehension is modulated by the baseline frequency of alternative structures, with the less frequent structure being more subject to structural priming effects. These results are discussed in the context of the error-based, implicit learning account of structural priming. PMID:26869954

Analyses of sweet receptor gene (Tas1r2) and preference for sweet stimuli in species of Carnivora.

PubMed

Li, Xia; Glaser, Dieter; Li, Weihua; Johnson, Warren E; O'Brien, Stephen J; Beauchamp, Gary K; Brand, Joseph G

2009-01-01

The extent to which taste receptor specificity correlates with, or even predicts, diet choice is not known. We recently reported that the insensitivity to sweeteners shown by species of Felidae can be explained by their lacking of a functional Tas1r2 gene. To broaden our understanding of the relationship between the structure of the sweet receptors and preference for sugars and artificial sweeteners, we measured responses to 12 sweeteners in 6 species of Carnivora and sequenced the coding regions of Tas1r2 in these same or closely related species. The lion showed no preference for any of the 12 sweet compounds tested, and it possesses the pseudogenized Tas1r2. All other species preferred some of the natural sugars, and their Tas1r2 sequences, having complete open reading frames, predict functional sweet receptors. In addition to preferring natural sugars, the lesser panda also preferred 3 (neotame, sucralose, and aspartame) of the 6 artificial sweeteners. Heretofore, it had been reported that among vertebrates, only Old World simians could taste aspartame. The observation that the lesser panda highly preferred aspartame could be an example of evolutionary convergence in the identification of sweet stimuli.

Trichostatin A (TSA) facilitates formation of partner preference in male prairie voles (Microtus ochrogaster).

PubMed

Duclot, F; Wang, H; Youssef, C; Liu, Y; Wang, Z; Kabbaj, M

2016-05-01

In the socially monogamous prairie voles (Microtus ochrogaster), the development of a social bonding is indicated by the formation of partner preference, which involves a variety of environmental and neurochemical factors and brain structures. In a most recent study in female prairie voles, we found that treatment with the histone deacetylase inhibitor trichostatin A (TSA) facilitates the formation of partner preference through up-regulation of oxytocin receptor (OTR) and vasopressin V1a receptor (V1aR) genes expression in the nucleus accumbens (NAcc). In the present study, we tested the hypothesis that TSA treatment also facilitates partner preference formation and alters OTR and V1aR genes expression in the NAcc in male prairie voles. We thus observed that central injection of TSA dose-dependently promoted the formation of partner preference in the absence of mating in male prairie voles. Interestingly, TSA treatment up-regulated OTR, but not V1aR, gene expression in the NAcc similarly as they were affected by mating - an essential process for naturally occurring partner preference. These data, together with others, not only indicate the involvement of epigenetic events but also the potential role of NAcc oxytocin in the regulation of partner preference in both male and female prairie voles. Copyright © 2016 Elsevier Inc. All rights reserved.

Analyses of Sweet Receptor Gene (Tas1r2) and Preference for Sweet Stimuli in Species of Carnivora

PubMed Central

Glaser, Dieter; Li, Weihua; Johnson, Warren E.; O'Brien, Stephen J.; Beauchamp, Gary K.; Brand, Joseph G.

2009-01-01

The extent to which taste receptor specificity correlates with, or even predicts, diet choice is not known. We recently reported that the insensitivity to sweeteners shown by species of Felidae can be explained by their lacking of a functional Tas1r2 gene. To broaden our understanding of the relationship between the structure of the sweet receptors and preference for sugars and artificial sweeteners, we measured responses to 12 sweeteners in 6 species of Carnivora and sequenced the coding regions of Tas1r2 in these same or closely related species. The lion showed no preference for any of the 12 sweet compounds tested, and it possesses the pseudogenized Tas1r2. All other species preferred some of the natural sugars, and their Tas1r2 sequences, having complete open reading frames, predict functional sweet receptors. In addition to preferring natural sugars, the lesser panda also preferred 3 (neotame, sucralose, and aspartame) of the 6 artificial sweeteners. Heretofore, it had been reported that among vertebrates, only Old World simians could taste aspartame. The observation that the lesser panda highly preferred aspartame could be an example of evolutionary convergence in the identification of sweet stimuli. PMID:19366814

Electronic structure and its external electric field modulation of PbPdO2 ultrathin slabs with (002) and (211) preferred orientations.

PubMed

Yang, Yanmin; Zhong, Kehua; Xu, Guigui; Zhang, Jian-Min; Huang, Zhigao

2017-07-31

The Electronic structure of PbPdO 2 with (002) and (211) preferred orientations were investigated using first-principles calculation. The calculated results indicate that, (002) and (211) orientations exhibit different electric field dependence of band-gap and carrier concentration. The small band gap and more sensitive electric field modulation of band gap were found in (002) orientation. Moreover, the electric field modulation of the resistivity up to 3-4 orders of magnitude is also observed in (002) slab, which reveals that origin of colossal electroresistance. Lastly, electric field modulation of band gap is well explained. This work should be significant for repeating the colossal electroresistance.

Permanent magnet design for high-speed superconducting bearings

DOEpatents

Hull, J.R.; Uherka, K.L.; Abdoud, R.G.

1996-09-10

A high temperature superconducting bearing including a permanent magnet rotor levitated by a high temperature superconducting structure is disclosed. The rotor preferably includes one or more concentric permanent magnet rings coupled to permanent magnet ring structures having substantially triangular and quadrangular cross-sections. Both alternating and single direction polarity magnet structures can be used in the bearing. 9 figs.

General of the Army George C. Marshall’s Strategic Leadership

DTIC Science & Technology

2017-03-15

coordinate organizational activities… structure tasks, engage in planning, build vision, acquire resources to achieve goals, manage crises, personal...organization while initiating massive changes in organizational structure and ideology in spite of conflicting traditions and preferences. His enabling...immediately upon taking the position, Marshall realized that an antiquated organizational structure interfered with daily operations. He told his

Radical bonding: structure and stability of bis(phenalenyl) complexes of divalent metals from across the periodic table.

PubMed

Craciun, Smaranda; Donald, Kelling J

2009-07-06

We examine the bonding possibilities of the bis(phenalenyl) MP(2) sandwich complexes of the divalent metals M = Be, Mg, Ca, Sr, Ba, Zn, Cd, and Hg, at the B3LYP level of theory. The outcome is an extraordinarily diverse class of low symmetry bis(phenalenyl)metal complexes in which bonding preferences and binding enthalpies differ dramatically. The lowest energy group 2 metal MP(2) complexes include an intriguing eta(1),eta(3) BeP(2) structure, and bent eta(6),eta(6) systems for M = Ca, Sr, and Ba. The group 12 bis(phenalenyl) complexes are thermodynamically unstable eta(1),eta(1) slip-sandwich structures. To better understand changes in the structural preferences going from the (eta(6),eta(6)) group 2 to the (eta(1),eta(1)) group 12 complexes, we explored the bonding in the bis(phenalenyl) complexes of transition metals with stable +2 oxidations states between Ca and Zn in period 4. The computed binding enthalpies are large and negative for nearly all of the minimum energy bis(phenalenyl) complexes of the group 2 and the transition metals; they are tiny for MgP(2), and are quite positive for the group 12 systems. The structural preferences and stability of the complexes is a subtle negotiation of several influences: the (un)availability of (n - 1)d and np, orbitals for bonding, the cost of the rehybridization at carbon sites in the phenalenyl rings in preparation for bonding to the metals, and the (P---P) interaction between the phenalenyl radicals.

Early-Life Seizures Produce Lasting Alterations in the Structure and Function of the Prefrontal Cortex

PubMed Central

Kleen, Jonathan K.; Sesqué, Alexandre; Wu, Edie X.; Miller, Forrest A.; Hernan, Amanda E.; Holmes, Gregory L.; Scott, Rod C.

2011-01-01

Early-life seizures (ELS) are associated with long-term behavioral disorders including autism and ADHD, suggesting that frontal lobe structures may be permanently affected. We tested whether ELS produce structural alterations in the prefrontal cortex (PFC) and impair PFC-mediated function using an operant task of behavioral flexibility in rats. Adult rats that had been exposed to 75 flurothyl seizures during postnatal days 1–10 showed decreased behavioral flexibility in the task compared to controls over multiple behavioral sessions, measured as a lever preference asymmetry (p<0.001) and a decreased efficiency of attaining food rewards (p<0.05). ELS rats also showed an increased thickness of the PFC (p<0.01), primarily attributed to layer V (p<0.01) with no differences in cell density. These structural changes correlated with lever preference behavioral impairments (p<0.05). This study demonstrates that the consequences of ELS extend to the PFC, which may help explain the high prevalence of comorbid behavioral disorders following ELS. PMID:21873119

Application of Deconvolution Algorithm of Point Spread Function in Improving Image Quality: An Observer Preference Study on Chest Radiography.

PubMed

Chae, Kum Ju; Goo, Jin Mo; Ahn, Su Yeon; Yoo, Jin Young; Yoon, Soon Ho

2018-01-01

To evaluate the preference of observers for image quality of chest radiography using the deconvolution algorithm of point spread function (PSF) (TRUVIEW ART algorithm, DRTECH Corp.) compared with that of original chest radiography for visualization of anatomic regions of the chest. Prospectively enrolled 50 pairs of posteroanterior chest radiographs collected with standard protocol and with additional TRUVIEW ART algorithm were compared by four chest radiologists. This algorithm corrects scattered signals generated by a scintillator. Readers independently evaluated the visibility of 10 anatomical regions and overall image quality with a 5-point scale of preference. The significance of the differences in reader's preference was tested with a Wilcoxon's signed rank test. All four readers preferred the images applied with the algorithm to those without algorithm for all 10 anatomical regions (mean, 3.6; range, 3.2-4.0; p < 0.001) and for the overall image quality (mean, 3.8; range, 3.3-4.0; p < 0.001). The most preferred anatomical regions were the azygoesophageal recess, thoracic spine, and unobscured lung. The visibility of chest anatomical structures applied with the deconvolution algorithm of PSF was superior to the original chest radiography.

Librarian instruction-delivery modality preferences for professional continuing education

PubMed Central

Lynn, Valerie A.; Bose, Arpita; Boehmer, Susan J.

2010-01-01

Objectives: Attending professional continuing education (CE) is an important component of librarianship. This research study identified librarians' preferences in delivery modalities of instruction for professional CE. The study also identified influential factors associated with attending CE classes. Methods: Five instruction-delivery modalities and six influential factors were identified for inclusion in an online survey. The survey completed by members of the American Library Association (ALA), Special Libraries Association (SLA), and Medical Library Association (MLA) provided the data for analysis of librarian preferences and influential factors. Results: The majority of respondents were MLA members, followed by ALA and SLA members. Librarians from all three library associations preferred the face-to-face instructional modality. The most influential factor associated with the decision to attend a professional CE class was cost. Conclusions: All five instruction-delivery modalities present useful structures for imparting professional CE. As librarians' experience with different modalities increases and as technology improves, preferences in instruction delivery may shift. But at present, face-to-face remains the most preferred modality. Based on the results of this study, cost was the most influential factor associated with attending a CE class. This may change as additional influential factors are identified and analyzed in future studies. PMID:20098656

[Television publicity and food preferences of school age children of the metropolitan region].

PubMed

Olivares, S; Albala, C; García, F; Jofré, I

1999-07-01

There is an alarming increase in the prevalence of child obesity in Chile. Lack of exercise and bad feeding habits strongly strongly contribute to the problem. To investigate the influence of television publicity on school age children food preferences. A semi structured interview was applied to a representative sample of 786 school age children aged 6 to 11 years old, living in Metropolitan Santiago. Time watching television during week days and the attitude towards food and beverage commercials was analyzed and related to food preferences. Ninety nine percent of school age children watch television during week days and 20% watches more the three hours daily. Snack commercials such as those about potato chips, chocolates, cookies and ice cream, are preferred by 35% of children. Soda commercials are preferred by 33% and yoghurt commercials by 12%. Eighty five percent of children had money to buy food. Of these, 66% bought snacks, 15% bought sodas and 7% yoghurt. The same tendency was observed in school collations. The high percentage of children, watching television and the influence of commercials in their food preferences, requires an urgent educational strategy to promote healthy feeding habits.

Provider and interpreter preferences among Somali women in a primary care setting.

PubMed

Odunukan, Olufunso W; Abdulai, Raolat M; Hagi Salaad, Misbil F; Lahr, Brian D; Flynn, Priscilla M; Wieland, Mark L

2015-04-01

Somali people are among the largest refugee populations to resettle in North America and Europe over the past 2 decades, and health disparities are well documented, including barriers to effective navigation of primary health care systems. Patient-provider gender discordance has been described as a barrier to health-seeking behaviors and effective communication by Somali women in past qualitative work. The objective of this study was to elucidate provider and interpreter preferences during clinical encounters according to gender and race among Somali women in the United States. Fifty Somali women empanelled to a large primary care practice completed pictorial surveys to elucidate preferences of Somali women for providers of different genders and race for different components of the clinical examination using a Likert-type scale. We found that Somali women generally preferred a female provider for conducting the physical examination, particularly for the pelvic, breast, and abdominal examinations. Likewise, Somali women strongly preferred female interpreters to be present during the physical examination. There was no stated preference for patient-provider racial concordance. These findings have implications for structural health care changes aimed at delivering culturally sensitive and effective primary care to Somali patients. © The Author(s) 2014.

Wedding ring shaped excitation coil

DOEpatents

MacLennan, Donald A.; Tsai, Peter

2001-01-01

A high frequency inductively coupled electrodeless lamp includes an excitation coil with an effective electrical length which is less than one half wavelength of a driving frequency applied thereto, preferably much less. The driving frequency may be greater than 100 MHz and is preferably as high as 915 MHz. Preferably, the excitation coil is configured as a non-helical, semi-cylindrical conductive surface having less than one turn, in the general shape of a wedding ring. At high frequencies, the current in the coil forms two loops which are spaced apart and parallel to each other. Configured appropriately, the coil approximates a Helmholtz configuration. The lamp preferably utilizes an bulb encased in a reflective ceramic cup with a pre-formed aperture defined therethrough. The ceramic cup may include structural features to aid in alignment and/or a flanged face to aid in thermal management. The lamp head is preferably an integrated lamp head comprising a metal matrix composite surrounding an insulating ceramic with the excitation integrally formed on the ceramic. A novel solid-state oscillator preferably provides RF power to the lamp. The oscillator is a single active element device capable of providing over 70 watts of power at over 70% efficiency.

Librarian instruction-delivery modality preferences for professional continuing education.

PubMed

Lynn, Valerie A; Bose, Arpita; Boehmer, Susan J

2010-01-01

Attending professional continuing education (CE) is an important component of librarianship. This research study identified librarians' preferences in delivery modalities of instruction for professional CE. The study also identified influential factors associated with attending CE classes. Five instruction-delivery modalities and six influential factors were identified for inclusion in an online survey. The survey completed by members of the American Library Association (ALA), Special Libraries Association (SLA), and Medical Library Association (MLA) provided the data for analysis of librarian preferences and influential factors. The majority of respondents were MLA members, followed by ALA and SLA members. Librarians from all three library associations preferred the face-to-face instructional modality. The most influential factor associated with the decision to attend a professional CE class was cost. All five instruction-delivery modalities present useful structures for imparting professional CE. As librarians' experience with different modalities increases and as technology improves, preferences in instruction delivery may shift. But at present, face-to-face remains the most preferred modality. Based on the results of this study, cost was the most influential factor associated with attending a CE class. This may change as additional influential factors are identified and analyzed in future studies.

Hotspot Selective Preference of the Chimeric Sequences Formed in Multiple Displacement Amplification.

PubMed

Tu, Jing; Lu, Na; Duan, Mengqin; Huang, Mengting; Chen, Liang; Li, Junji; Guo, Jing; Lu, Zuhong

2017-02-24

Multiple displacement amplification (MDA) is considered to be a conventional approach to comprehensive amplification from low input DNA. The chimeric reads generated in MDA lead to severe disruption in some studies, including those focusing on heterogeneity, structural variation, and genetic recombination. Meanwhile, the generation of by-products gives a new approach to gain insights into the reaction process of φ29 polymerase. Here, we analyzed 36.7 million chimeras and screened 196 billion chimeric hotspots in the human genome, as well as evaluating the hotspot selective preference of chimeras. No significant preference was captured in the distributions of chimeras and hotspots among chromosomes. Hotspots with overlaps for 12-13 nucleotides (nt) were most likely to be selected as templates in chimera generation. Meanwhile, a regularly selective preference was noticed in overlap GC content. The preferences in overlap length and GC content was shown to be pertinent to the sequence denaturation temperature, which pointed out the optimization direction for reducing chimeras. Distance preference between two segments of chimeras was 80-280 nt. The analysis is beneficial for reducing the chimeras in MDA, and the characterization of MDA chimeras is helpful in distinguishing MDA chimeras from chimeric sequences caused by disease.

Hotspot Selective Preference of the Chimeric Sequences Formed in Multiple Displacement Amplification

PubMed Central

Tu, Jing; Lu, Na; Duan, Mengqin; Huang, Mengting; Chen, Liang; Li, Junji; Guo, Jing; Lu, Zuhong

2017-01-01

Multiple displacement amplification (MDA) is considered to be a conventional approach to comprehensive amplification from low input DNA. The chimeric reads generated in MDA lead to severe disruption in some studies, including those focusing on heterogeneity, structural variation, and genetic recombination. Meanwhile, the generation of by-products gives a new approach to gain insights into the reaction process of φ29 polymerase. Here, we analyzed 36.7 million chimeras and screened 196 billion chimeric hotspots in the human genome, as well as evaluating the hotspot selective preference of chimeras. No significant preference was captured in the distributions of chimeras and hotspots among chromosomes. Hotspots with overlaps for 12–13 nucleotides (nt) were most likely to be selected as templates in chimera generation. Meanwhile, a regularly selective preference was noticed in overlap GC content. The preferences in overlap length and GC content was shown to be pertinent to the sequence denaturation temperature, which pointed out the optimization direction for reducing chimeras. Distance preference between two segments of chimeras was 80–280 nt. The analysis is beneficial for reducing the chimeras in MDA, and the characterization of MDA chimeras is helpful in distinguishing MDA chimeras from chimeric sequences caused by disease. PMID:28245591

Structure-wise discrimination of cytosine, thymine, and uracil by proteins in terms of their nonbonded interactions.

PubMed

Usha, S; Selvaraj, S

2014-01-01

The molecular recognition and discrimination of very similar ligand moieties by proteins are important subjects in protein-ligand interaction studies. Specificity in the recognition of molecules is determined by the arrangement of protein and ligand atoms in space. The three pyrimidine bases, viz. cytosine, thymine, and uracil, are structurally similar, but the proteins that bind to them are able to discriminate them and form interactions. Since nonbonded interactions are responsible for molecular recognition processes in biological systems, our work attempts to understand some of the underlying principles of such recognition of pyrimidine molecular structures by proteins. The preferences of the amino acid residues to contact the pyrimidine bases in terms of nonbonded interactions; amino acid residue-ligand atom preferences; main chain and side chain atom contributions of amino acid residues; and solvent-accessible surface area of ligand atoms when forming complexes are analyzed. Our analysis shows that the amino acid residues, tyrosine and phenyl alanine, are highly involved in the pyrimidine interactions. Arginine prefers contacts with the cytosine base. The similarities and differences that exist between the interactions of the amino acid residues with each of the three pyrimidine base atoms in our analysis provide insights that can be exploited in designing specific inhibitors competitive to the ligands.

Site-directed mutagenesis studies of the aromatic residues at the active site of a lipase from Malassezia globosa.

PubMed

Gao, Chongliang; Lan, Dongming; Liu, Lu; Zhang, Houjin; Yang, Bo; Wang, Yonghua

2014-07-01

The lipase from Malassezia globosa (SMG1) has specific activity on mono- and diacylglycerol but not on triacylglycerol. The structural analysis of SMG1 structure shows that two bulky aromatic residues, W116 and W229, lie at the entrance of the active site. To study the functions of these two residues in the substrate recognition and the catalytic reaction, they were mutated to a series of amino acids. Subsequently, biochemical properties of these mutants were investigated. Although the activities decrease, W229L and W116A show a significant shift in substrate preference. W229L has an increased preference for short-chain substrates whereas W116A has preference for long-chain substrates. Besides, the half-lives of W116A and W116H at 45 °C are 346.6 min and 115.5 min respectively, which improve significantly compared to that of native enzyme. Moreover, the optimum substrate of W116A, W116F and W229F mutants shifted from p-nitrophenyl caprylate to p-nitrophenyl myristate. These findings not only shed light onto the lipase structure/function relationship but also lay the framework for the potential industrial applications. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

The structural diversity of ABS{sub 3} compounds with d{sup 0} electronic configuration for the B-cation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brehm, John A., E-mail: brehmj@sas.upenn.edu; Bennett, Joseph W.; Schoenberg, Michael Rutenberg

2014-06-14

We use first-principles density functional theory within the local density approximation to ascertain the ground state structure of real and theoretical compounds with the formula ABS{sub 3} (A = K, Rb, Cs, Ca, Sr, Ba, Tl, Sn, Pb, and Bi; and B = Sc, Y, Ti, Zr, V, and Nb) under the constraint that B must have a d{sup 0} electronic configuration. Our findings indicate that none of these AB combinations prefer a perovskite ground state with corner-sharing BS{sub 6} octahedra, but that they prefer phases with either edge- or face-sharing motifs. Further, a simple two-dimensional structure field map createdmore » from A and B ionic radii provides a neat demarcation between combinations preferring face-sharing versus edge-sharing phases for most of these combinations. We then show that by modifying the common Goldschmidt tolerance factor with a multiplicative term based on the electronegativity difference between A and S, the demarcation between predicted edge-sharing and face-sharing ground state phases is enhanced. We also demonstrate that, by calculating the free energy contribution of phonons, some of these compounds may assume multiple phases as synthesis temperatures are altered, or as ambient temperatures rise or fall.« less

Species differentiation on a dynamic landscape: shifts in metapopulation genetic structure using the chronology of the Hawaiian Archipelago

USGS Publications Warehouse

Roderick, George K.; Croucher, Peter J.P.; Vandergast, Amy G.; Gillespie, Rosemary G.

2012-01-01

Species formation during adaptive radiation often occurs in the context of a changing environment. The establishment and arrangement of populations, in space and time, sets up ecological and genetic processes that dictate the rate and pattern of differentiation. Here, we focus on how a dynamic habitat can affect genetic structure, and ultimately, differentiation among populations. We make use of the chronology and geographical history provided by the Hawaiian archipelago to examine the initial stages of population establishment and genetic divergence. We use data from a set of 6 spider lineages that differ in habitat affinities, some preferring low elevation habitats with a longer history of connection, others being more specialized for high elevation and/or wet forest, some with more general habitat affinities. We show that habitat preferences associated with lineages are important in ecological and genetic structuring. Lineages that have more restricted habitat preferences are subject to repeated episodes of isolation and fragmentation as a result of lava flows and vegetation succession. The initial dynamic set up by the landscape translates over time into discrete lineages. Further work is needed to understand how genetic changes interact with a changing set of ecological interactions amongst a shifting mosaic of landscapes to achieve species formation.

Concepts of ‘personalization’ in personalized medicine: implications for economic evaluation

PubMed Central

Rogowski, Wolf; Payne, Katherine; Schnell-Inderst, Petra; Manca, Andrea; Rochau, Ursula; Jahn, Beate; Alagoz, Oguzhan; Leidl, Reiner; Siebert, Uwe

2015-01-01

Context This paper assesses if, and how, existing methods for economic evaluation are applicable to the evaluation of PM and if not, where extension to methods may be required. Method Structured workshop with a pre-defined group of experts (n=47), run using a modified nominal group technique. Workshop findings were recorded using extensive note taking and summarised using thematic data analysis. The workshop was complemented by structured literature searches. Results The key finding emerging from the workshop, using an economic perspective, was that two distinct, but linked, interpretations of the concept of PM exist (personalization by ‘physiology’ or ‘preferences’). These interpretations involve specific challenges for the design and conduct of economic evaluations. Existing evaluative (extra-welfarist) frameworks were generally considered appropriate for evaluating PM. When ‘personalization’ is viewed as using physiological biomarkers, challenges include: representing complex care pathways; representing spill-over effects; meeting data requirements such as evidence on heterogeneity; choosing appropriate time horizons for the value of further research in uncertainty analysis. When viewed as tailoring medicine to patient preferences, further work is needed regarding: revealed preferences, e.g. treatment (non)adherence; stated preferences, e.g. risk interpretation and attitude; consideration of heterogeneity in preferences; and the appropriate framework (welfarism vs. extra-welfarism) to incorporate non-health benefits. Conclusion Ideally, economic evaluations should take account of both interpretations of PM and consider physiology and preferences. It is important for decision makers to be cognizant of the issues involved with the economic evaluation of PM to appropriately interpret the evidence and target future research funding. PMID:25249200

Data on customer perceptions on the role of celebrity endorsement on brand preference.

PubMed

Ibidunni, Ayodotun Stephen; Olokundun, Maxwell Ayodele; Ibidunni, Oyebisi Mary; Borishade, Taiye Tairat; Falola, Hezekiah Olubusayo; Salau, Odunayo Paul; Amaihian, Augusta Bosede; Fred, Peter

2018-06-01

This research presents data on the effect of celebrity endorsement on consumers' brand preference. Copies of structured questionnaire were administered to 384 customers of telecommunication industry. Using descriptive, correlation and regression statistical analysis, the data revealed that celebrity image has an effect on consumer brand loyalty, celebrity trustworthiness has an influence on consumer brand association. More so, the relationship between celebrity expertise and perceived quality of the product was established.

Co-production and Pilot of a Structured Interview Using Talking Mats® to Survey the Television Viewing Habits and Preferences of Adults and Young People with Learning Disabilities

ERIC Educational Resources Information Center

Bunning, Karen; Alder, Ruth; Proudman, Lydia; Wyborn, Harriet

2017-01-01

Background: Capturing the views of people with learning disabilities is not straightforward. Talking Mats® has been used successfully to solicit the views of such individuals. The aim was to co-produce an interview schedule using Talking Mats® on the subject of television-viewing habits and preferences of adults and young people with learning…

A fuzzy set preference model for market share analysis

NASA Technical Reports Server (NTRS)

Turksen, I. B.; Willson, Ian A.

1992-01-01

Consumer preference models are widely used in new product design, marketing management, pricing, and market segmentation. The success of new products depends on accurate market share prediction and design decisions based on consumer preferences. The vague linguistic nature of consumer preferences and product attributes, combined with the substantial differences between individuals, creates a formidable challenge to marketing models. The most widely used methodology is conjoint analysis. Conjoint models, as currently implemented, represent linguistic preferences as ratio or interval-scaled numbers, use only numeric product attributes, and require aggregation of individuals for estimation purposes. It is not surprising that these models are costly to implement, are inflexible, and have a predictive validity that is not substantially better than chance. This affects the accuracy of market share estimates. A fuzzy set preference model can easily represent linguistic variables either in consumer preferences or product attributes with minimal measurement requirements (ordinal scales), while still estimating overall preferences suitable for market share prediction. This approach results in flexible individual-level conjoint models which can provide more accurate market share estimates from a smaller number of more meaningful consumer ratings. Fuzzy sets can be incorporated within existing preference model structures, such as a linear combination, using the techniques developed for conjoint analysis and market share estimation. The purpose of this article is to develop and fully test a fuzzy set preference model which can represent linguistic variables in individual-level models implemented in parallel with existing conjoint models. The potential improvements in market share prediction and predictive validity can substantially improve management decisions about what to make (product design), for whom to make it (market segmentation), and how much to make (market share prediction).

Deciphering the Preference and Predicting the Viability of Circular Permutations in Proteins

PubMed Central

Liu, Yen-Yi; Wang, Li-Fen; Hwang, Jenn-Kang; Lyu, Ping-Chiang

2012-01-01

Circular permutation (CP) refers to situations in which the termini of a protein are relocated to other positions in the structure. CP occurs naturally and has been artificially created to study protein function, stability and folding. Recently CP is increasingly applied to engineer enzyme structure and function, and to create bifunctional fusion proteins unachievable by tandem fusion. CP is a complicated and expensive technique. An intrinsic difficulty in its application lies in the fact that not every position in a protein is amenable for creating a viable permutant. To examine the preferences of CP and develop CP viability prediction methods, we carried out comprehensive analyses of the sequence, structural, and dynamical properties of known CP sites using a variety of statistics and simulation methods, such as the bootstrap aggregating, permutation test and molecular dynamics simulations. CP particularly favors Gly, Pro, Asp and Asn. Positions preferred by CP lie within coils, loops, turns, and at residues that are exposed to solvent, weakly hydrogen-bonded, environmentally unpacked, or flexible. Disfavored positions include Cys, bulky hydrophobic residues, and residues located within helices or near the protein's core. These results fostered the development of an effective viable CP site prediction system, which combined four machine learning methods, e.g., artificial neural networks, the support vector machine, a random forest, and a hierarchical feature integration procedure developed in this work. As assessed by using the hydrofolate reductase dataset as the independent evaluation dataset, this prediction system achieved an AUC of 0.9. Large-scale predictions have been performed for nine thousand representative protein structures; several new potential applications of CP were thus identified. Many unreported preferences of CP are revealed in this study. The developed system is the best CP viability prediction method currently available. This work will facilitate the application of CP in research and biotechnology. PMID:22359629

Monkeys choose as if maximizing utility compatible with basic principles of revealed preference theory

PubMed Central

Pastor-Bernier, Alexandre; Plott, Charles R.; Schultz, Wolfram

2017-01-01

Revealed preference theory provides axiomatic tools for assessing whether individuals make observable choices “as if” they are maximizing an underlying utility function. The theory evokes a tradeoff between goods whereby individuals improve themselves by trading one good for another good to obtain the best combination. Preferences revealed in these choices are modeled as curves of equal choice (indifference curves) and reflect an underlying process of optimization. These notions have far-reaching applications in consumer choice theory and impact the welfare of human and animal populations. However, they lack the empirical implementation in animals that would be required to establish a common biological basis. In a design using basic features of revealed preference theory, we measured in rhesus monkeys the frequency of repeated choices between bundles of two liquids. For various liquids, the animals’ choices were compatible with the notion of giving up a quantity of one good to gain one unit of another good while maintaining choice indifference, thereby implementing the concept of marginal rate of substitution. The indifference maps consisted of nonoverlapping, linear, convex, and occasionally concave curves with typically negative, but also sometimes positive, slopes depending on bundle composition. Out-of-sample predictions using homothetic polynomials validated the indifference curves. The animals’ preferences were internally consistent in satisfying transitivity. Change of option set size demonstrated choice optimality and satisfied the Weak Axiom of Revealed Preference (WARP). These data are consistent with a version of revealed preference theory in which preferences are stochastic; the monkeys behaved “as if” they had well-structured preferences and maximized utility. PMID:28202727

Monkeys choose as if maximizing utility compatible with basic principles of revealed preference theory.

PubMed

Pastor-Bernier, Alexandre; Plott, Charles R; Schultz, Wolfram

2017-03-07

Revealed preference theory provides axiomatic tools for assessing whether individuals make observable choices "as if" they are maximizing an underlying utility function. The theory evokes a tradeoff between goods whereby individuals improve themselves by trading one good for another good to obtain the best combination. Preferences revealed in these choices are modeled as curves of equal choice (indifference curves) and reflect an underlying process of optimization. These notions have far-reaching applications in consumer choice theory and impact the welfare of human and animal populations. However, they lack the empirical implementation in animals that would be required to establish a common biological basis. In a design using basic features of revealed preference theory, we measured in rhesus monkeys the frequency of repeated choices between bundles of two liquids. For various liquids, the animals' choices were compatible with the notion of giving up a quantity of one good to gain one unit of another good while maintaining choice indifference, thereby implementing the concept of marginal rate of substitution. The indifference maps consisted of nonoverlapping, linear, convex, and occasionally concave curves with typically negative, but also sometimes positive, slopes depending on bundle composition. Out-of-sample predictions using homothetic polynomials validated the indifference curves. The animals' preferences were internally consistent in satisfying transitivity. Change of option set size demonstrated choice optimality and satisfied the Weak Axiom of Revealed Preference (WARP). These data are consistent with a version of revealed preference theory in which preferences are stochastic; the monkeys behaved "as if" they had well-structured preferences and maximized utility.

Visual systemizing preference in children with autism: A randomized controlled trial of intranasal oxytocin.

PubMed

Strathearn, Lane; Kim, Sohye; Bastian, D Anthony; Jung, Jennifer; Iyengar, Udita; Martinez, Sheila; Goin-Kochel, Robin P; Fonagy, Peter

2018-05-01

Several studies have suggested that the neuropeptide oxytocin may enhance aspects of social communication in autism. Little is known, however, about its effects on nonsocial manifestations, such as restricted interests and repetitive behaviors. In the empathizing-systemizing theory of autism, social deficits are described along the continuum of empathizing ability, whereas nonsocial aspects are characterized in terms of an increased preference for patterned or rule-based systems, called systemizing. We therefore developed an automated eye-tracking task to test whether children and adolescents with autism spectrum disorder (ASD) compared to matched controls display a visual preference for more highly organized and structured (systemized) real-life images. Then, as part of a randomized, double-blind, placebo-controlled crossover study, we examined the effect of intranasal oxytocin on systemizing preferences in 16 male children with ASD, compared with 16 matched controls. Participants viewed 14 slides, each containing four related pictures (e.g., of people, animals, scenes, or objects) that differed primarily on the degree of systemizing. Visual systemizing preference was defined in terms of the fixation time and count for each image. Unlike control subjects who showed no gaze preference, individuals with ASD preferred to fixate on more highly systemized pictures. Intranasal oxytocin eliminated this preference in ASD participants, who now showed a similar response to control subjects on placebo. In contrast, control participants increased their visual preference for more systemized images after receiving oxytocin versus placebo. These results suggest that, in addition to its effects on social communication, oxytocin may play a role in some of the nonsocial manifestations of autism.

Assessment of Thermal and Textural Characteristics and Consumer Preferences of Lemon and Strawberry Flavored Fish Oil Organogels.

PubMed

Yılmaz, Emin; Öǧütcü, Mustafa; Arifoglu, Nazan

2015-01-01

In this study, strawberry and lemon flavored fish oil organogels (FOO) were prepared with beeswax as the organogelator. The physical, thermal and textural characteristics as well as the consumer preferences of the flavored organogels were determined in comparison with fish oil and FOO containing no flavor. Furthermore, the stability of the organogels was evaluated during 90 day storage at 4°C. The results revealed that, structurally stable fish oil organogels as spreadable products might be formed and that flavoring of the gels enhances consumer preference. Thus, flavoring of fish oil organogels could be a challenge in increasing the consumption of fish oil.

Atomic site preferences and structural evolution in vanadium-doped ZrSiO4 from multinuclear solid-state NMR

NASA Astrophysics Data System (ADS)

Dajda, N.; Dixon, J. M.; Smith, M. E.; Carthey, N.; Bishop, P. T.

2003-01-01

Solid state NMR spectra of 29Si are reported from pure and vanadium-doped zircon (V-ZrSiO4) samples. The vanadium concentration is varied up to ˜1-mol % V4+ by using both conventional-firing and sol-gel routes, and 51V NMR data are also recorded. 17O NMR of 17O isotopically enriched samples shows that the initial gel is completely amorphous with the whole range of possible M-O-M' linkages detected, and that this structure evolves into a fully ordered ZrSiO4 structure with calcination. Static 91Zr NMR data is reported from a pure zircon sample. The NMR data are used to quantify the amount of vanadium entering the zircon structure, and to elucidate its site preference within the lattice. Two contact shifted peaks with very different T1 relaxation from the main zircon peak but attributable to the zircon lattice are observed in the 29Si NMR spectra for all samples. These spectra are consistent with vanadium substitution on both the tetrahedral and dodecahedral sites, with a slight preference for the silicon site. The data show that the relative occupation of these two sites is almost independent of the preparation method and vanadium concentration. At a higher vanadium concentration a third additional peak is observed which may indicate another substitution site. Variable temperature NMR and susceptibility measurements indicate the hyperfine nature of the interactions influencing silicon from V4+ ions in the different sites.

Vertical group III-V nanowires on si, heterostructures, flexible arrays and fabrication

DOEpatents

Wang, Deli; Soci, Cesare; Bao, Xinyu; Wei, Wei; Jing, Yi; Sun, Ke

2015-01-13

Embodiments of the invention provide a method for direct heteroepitaxial growth of vertical III-V semiconductor nanowires on a silicon substrate. The silicon substrate is etched to substantially completely remove native oxide. It is promptly placed in a reaction chamber. The substrate is heated and maintained at a growth temperature. Group III-V precursors are flowed for a growth time. Preferred embodiment vertical Group III-V nanowires on silicon have a core-shell structure, which provides a radial homojunction or heterojunction. A doped nanowire core is surrounded by a shell with complementary doping. Such can provide high optical absorption due to the long optical path in the axial direction of the vertical nanowires, while reducing considerably the distance over which carriers must diffuse before being collected in the radial direction. Alloy composition can also be varied. Radial and axial homojunctions and heterojunctions can be realized. Embodiments provide for flexible Group III-V nanowire structures. An array of Group III-V nanowire structures is embedded in polymer. A fabrication method forms the vertical nanowires on a substrate, e.g., a silicon substrate. Preferably, the nanowires are formed by the preferred methods for fabrication of Group III-V nanowires on silicon. Devices can be formed with core/shell and core/multi-shell nanowires and the devices are released from the substrate upon which the nanowires were formed to create a flexible structure that includes an array of vertical nanowires embedded in polymer.

Lineage diversification in a widespread species: roles for niche divergence and conservatism in the common kingsnake, Lampropeltis getula.

PubMed

Alexander Pyron, R; Burbrink, Frank T

2009-08-01

Niche conservatism and niche divergence are both important ecological mechanisms associated with promoting allopatric speciation across geographical barriers. However, the potential for variable responses in widely distributed organisms has not been fully investigated. For allopatric sister lineages, three patterns for the interaction of ecological niche preference and geographical barriers are possible: (i) niche conservatism at a physical barrier; (ii) niche divergence at a physical barrier; and (iii) niche divergence in the absence of a physical barrier. We test for the presence of these patterns in a transcontinentally distributed snake species, the common kingsnake (Lampropeltis getula), to determine the relative frequency of niche conservatism or divergence in a single species complex inhabiting multiple distinct ecoregions. We infer the phylogeographic structure of the kingsnake using a range-wide data set sampled for the mitochondrial gene cytochrome b. We use coalescent simulation methods to test for the presence of structured lineage formation vs. fragmentation of a widespread ancestor. Finally, we use statistical techniques for creating and evaluating ecological niche models to test for conservatism of ecological niche preferences. Significant geographical structure is present in the kingsnake, for which coalescent tests indicate structured population division. Surprisingly, we find evidence for all three patterns of conservatism and divergence. This suggests that ecological niche preferences may be labile on recent phylogenetic timescales, and that lineage formation in widespread species can result from an interaction between inertial tendencies of niche conservatism and natural selection on populations in ecologically divergent habitats.

Structure and Bonding in CE5- (E=Al-Tl) Clusters: Planar Tetracoordinate Carbon versus Pentacoordinate Carbon.

PubMed

Ravell, Estefanía; Jalife, Said; Barroso, Jorge; Orozco-Ic, Mesías; Hernández-Juárez, Gerardo; Ortiz-Chi, Filiberto; Pan, Sudip; Cabellos, José Luis; Merino, Gabriel

2018-03-24

The structure, bonding, and stability of clusters with the empirical formula CE 5 - (E=Al-Tl) have been analyzed by means of high-level computations. The results indicate that, whereas aluminum and gallium clusters have C 2v structures with a planar tetracoordinate carbon (ptC), their heavier homologues prefer three-dimensional C 4v forms with a pentacoordinate carbon center over the ptC one. The reason for such a preference is a delicate balance between the interaction energy of the fifth E atom with CE 4 and the distortion energy. Moreover, bonding analysis shows that the ptC systems can be better described as CE 4 - , with 17-valence electrons interacting with E. The ptC core in these systems exhibits double aromatic (both σ and π) behavior, but the σ contribution is dominating. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Method and apparatus for assessing cardiovascular risk

NASA Technical Reports Server (NTRS)

Albrecht, Paul (Inventor); Bigger, J. Thomas (Inventor); Cohen, Richard J. (Inventor)

1998-01-01

The method for assessing risk of an adverse clinical event includes detecting a physiologic signal in the subject and determining from the physiologic signal a sequence of intervals corresponding to time intervals between heart beats. The long-time structure of fluctuations in the intervals over a time period of more than fifteen minutes is analyzed to assess risk of an adverse clinical event. In a preferred embodiment, the physiologic signal is an electrocardiogram and the time period is at least fifteen minutes. A preferred method for analyzing the long-time structure variability in the intervals includes computing the power spectrum and fitting the power spectrum to a power law dependence on frequency over a selected frequency range such as 10.sup.-4 to 10.sup.-2 Hz. Characteristics of the long-time structure fluctuations in the intervals is used to assess risk of an adverse clinical event.

Shape and symmetry of heptacoordinate transition-metal complexes: structural trends.

PubMed

Casanova, David; Alemany, Pere; Bofill, Josep M; Alvarez, Santiago

2003-03-17

The stereochemistries of heptacoordinate transition-metal complexes are analyzed by using continuous symmetry and shape measures of their coordination spheres. The distribution of heptacoordination through the transition-metal series is presented based on structural database searches including organometallic and Werner-type molecular complexes, metalloproteins, and extended solids. The most common polyhedron seems to be the pentagonal bipyramid, while different preferences are found for specific families of compounds, as in the complexes with three or four carbonyl or phosphine ligands, which prefer the capped octahedron or the capped trigonal prism rather than the pentagonal bipyramid. The symmetry maps for heptacoordination are presented and shown to be helpful for detecting stereochemical trends. The maximal symmetry interconversion pathways between the three most common polyhedra are defined in terms of symmetry constants and a large number of experimental structures are seen to fall along those paths.

CdO nanosheet film with a (200)-preferred orientation with sensitivity to liquefied petroleum gas (LPG) at low-temperatures.

PubMed

Cui, Guangliang; Li, Zimeng; Gao, Liang; Zhang, Mingzhe

2012-12-21

CdO nanosheet film can be synthesized by electrochemical deposition in an ultra-thin liquid layer by using Cd(NO(3))(2) and HNO(3) as source materials for Cd and oxygen respectively. HNO(3) is also used to adjust the pH of the electrolyte. Studies on the detailed structure indicate that the synthesized CdO nanosheet film has a face-centered cubic structure with (200)-preferred orientation. The response of the CdO nanosheet film to liquefied petroleum gas (LPG) at low temperature has been significantly improved by the novel structure of film. It has exhibited excellent sensitivity and selectivity to LPG at low temperature. A new growth mechanism of electrochemical deposition has been proposed to elaborate the formation of nanosheet in an ultra-thin liquid layer. The self-oscillation of potential in the growth interface and intermediate hydroxide are responsible for the formation of nanosheets.

A heterogeneous thermal environment enables remarkable behavioral thermoregulation in Uta stansburiana

PubMed Central

Goller, Maria; Goller, Franz; French, Susannah S

2014-01-01

Ectotherms can attain preferred body temperatures by selecting specific temperature microhabitats within a varied thermal environment. The side-blotched lizard, Uta stansburiana may employ microhabitat selection to thermoregulate behaviorally. It is unknown to what degree habitat structural complexity provides thermal microhabitats for thermoregulation. Thermal microhabitat structure, lizard temperature, and substrate preference were simultaneously evaluated using thermal imaging. A broad range of microhabitat temperatures was available (mean range of 11°C within 1–2 m2) while mean lizard temperature was between 36°C and 38°C. Lizards selected sites that differed significantly from the mean environmental temperature, indicating behavioral thermoregulation, and maintained a temperature significantly above that of their perch (mean difference of 2.6°C). Uta's thermoregulatory potential within a complex thermal microhabitat structure suggests that a warming trend may prove advantageous, rather than detrimental for this population. PMID:25535549

Face-to-face or not-to-face: A technology preference for communication.

PubMed

Jaafar, Noor Ismawati; Darmawan, Bobby; Mohamed Ariffin, Mohd Yahya

2014-11-01

This study employed the Model of Technology Preference (MTP) to explain the relationship of the variables as the antecedents of behavioral intention to adopt a social networking site (SNS) for communication. Self-administered questionnaires were distributed to SNS account users using paper-based and web-based surveys that led to 514 valid responses. The data were analyzed using structural equation modeling (SEM). The results show that two out of three attributes of the attribute-based preference (ATRP) affect attitude-based preference (ATTP). The data support the hypotheses that perceived enjoyment and social presence are predictors of ATTP. In this study, the findings further indicated that ATTP has no relationship with the behavioral intention of using SNS, but it has a relationship with the attitude of using SNS. SNS development should provide features that ensure enjoyment and social presence for users to communicate instead of using the traditional face-to-face method of communication.

Low temperature catalysts for methanol production

DOEpatents

Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

1986-09-30

A catalyst and process useful at low temperatures (below about 160 C) and preferably in the range 80--120 C used in the production of methanol from carbon monoxide and hydrogen are disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa-M(OAc)[sub 2] where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1--6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is Nic (where M = Ni and R = tertiary amyl). Mo(CO)[sub 6] is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

Low temperature catalysts for methanol production

DOEpatents

Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

1986-10-28

A catalyst and process useful at low temperatures (below about 160 C) and preferably in the range 80--120 C used in the production of methanol from carbon monoxide and hydrogen are disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa-M(OAc)[sub 2] where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1-6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is NiC (where M = Ni and R = tertiary amyl). Mo(CO)[sub 6] is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

Satisfaction and Achievement: Antagonists in ATI Research on Classroom Structure.

ERIC Educational Resources Information Center

Strom, Bruce; And Others

To date, the constructive motivation hypothesis has generally been limited to educational achievement as an outcome variable, and few studies have been specifically designed to investigate student satisfaction outcomes. To measure student preferences for course structure and difficulty level and student perceptions of instructors' orientation…

Interface Problems: Structural Constraints on Interpretation?

ERIC Educational Resources Information Center

Frazier, Lyn; Clifton, Charles; Rayner, Keith; Deevy, Patricia; Koh, Sungryong; Bader, Markus

2005-01-01

Five experiments investigated the interpretation of quantified noun phrases in relation to discourse structure. They demonstrated, using questionnaire and on-line reading techniques, that readers in English prefer to give a quantified noun phrase in (VP-external) subject position a presuppositional interpretation, in which the noun phrase limits…

Attitudes Regarding Action Learning: Undergraduate vs. Graduate Business Students

ERIC Educational Resources Information Center

Rosenstein, Alvin; Ashley, Allan; Gupta, Rakesh; Ulin, Kristin

2008-01-01

Previous research in our Action Learning Program demonstrated that although undergraduates preferred the Action Learning mode to the traditional lecture and discussion mode of instruction, they missed the familiar structure of the more traditional pedagogy. Consequently increased structure was implemented in both an undergraduate and graduate…

Effects of structured versus non-structured learning on achievement and attitudes of fifth graders in a public aquarium

NASA Astrophysics Data System (ADS)

Kafka, Merryl Audrey

The investigator analyzed the main effect of a structured-learning experience in an informal setting, as well as interactions between the students' learning-style variations toward the element of structure and the imposed instructional conditions. The subjects consisted of 170 students enrolled in two public schools located in Brooklyn, New York. The students were predominantly a White multi-ethnic population consisting of 118 Caucasians, 25 Hispanics, 24 Asians, and 3 African-Americans. Three randomly assigned classes (n = 81) were provided trip sheets, which directed students on how to learn new information with written questions and directives. Three randomly assigned non-structured classes (n = 89) experienced the same exhibit in a free-form manner. Science-based criterion-referenced pre- and posttests were administered, in addition to Learning Style Inventories (Dunn, Dunn, & Price, 1996) and a modified Semantic Differential Scale (Pizzo, 1981), which was used to measure attitudinal levels. The non-structured group had access to similar content information in the form of exhibit graphics, but apparently they chose not to read it as carefully or engage in the information-seeking process as intensely as the students equipped with trip sheets. Analysis of covariance (ANCOVA) indicated that a structured-learning experience produced significantly higher science-achievement test scores than in a non-structured-learning experience (p = .0001). In addition, there was no single learning-style variation (preference, aversion, or no preference) to structure that produced significantly higher gains than another. Furthermore, attitudinal scores were not significantly different between structured and non-structured groups, as well as among homogeneous subsets of students with learning-style variations that matched, mismatched, or indicated no-preferenced positions on the element of structure. Hence, a moderate amount of structure resulted in academic gains without diminishing attitudinal scores. The fact that students' learning-style variations for sociological, design, and perceptual preferences were simultaneously accommodated in this setting may have contributed to the overall positive effects of this structure-based intervention. The diversified teaching resources of the exhibit and the sense of self-empowerment in a student-directed environment may have elevated students' attitudes regardless of their learning-style need for structure. The students' acceptance of a trip sheet that promoted the understanding of science concepts may have contributed to academic success.

Variable substrate preference among phospholipase D toxins from sicariid spiders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lajoie, Daniel M.; Roberts, Sue A.; Zobel-Thropp, Pamela A.

Venoms of the sicariid spiders contain phospholipase D enzyme toxins that can cause severe dermonecrosis and even death in humans. These enzymes convert sphingolipid and lysolipid substrates to cyclic phosphates by activating a hydroxyl nucleophile present in both classes of lipid. The most medically relevant substrates are thought to be sphingomyelin and/or lysophosphatidylcholine. To better understand the substrate preference of these toxins, we used 31P NMR to compare the activity of three related but phylogenetically diverse sicariid toxins against a diverse panel of sphingolipid and lysolipid substrates. Two of the three showed significantly faster turnover of sphingolipids over lysolipids, andmore » all three showed a strong preference for positively charged (choline and/or ethanolamine) over neutral (glycerol and serine) headgroups. Strikingly, however, the enzymes vary widely in their preference for choline, the headgroup of both sphingomyelin and lysophosphatidylcholine, versus ethanolamine. An enzyme from Sicarius terrosus showed a strong preference for ethanolamine over choline, whereas two paralogous enzymes from Loxosceles arizonica either preferred choline or showed no significant preference. Intrigued by the novel substrate preference of the Sicarius enzyme, we solved its crystal structure at 2.1 Å resolution. Lastly, the evolution of variable substrate specificity may help explain the reduced dermonecrotic potential of some natural toxin variants, because mammalian sphingolipids use primarily choline as a positively charged headgroup; it may also be relevant for sicariid predatory behavior, because ethanolamine-containing sphingolipids are common in insect prey.« less

Variable substrate preference among phospholipase D toxins from sicariid spiders

DOE PAGES

Lajoie, Daniel M.; Roberts, Sue A.; Zobel-Thropp, Pamela A.; ...

2015-03-09

Venoms of the sicariid spiders contain phospholipase D enzyme toxins that can cause severe dermonecrosis and even death in humans. These enzymes convert sphingolipid and lysolipid substrates to cyclic phosphates by activating a hydroxyl nucleophile present in both classes of lipid. The most medically relevant substrates are thought to be sphingomyelin and/or lysophosphatidylcholine. To better understand the substrate preference of these toxins, we used 31P NMR to compare the activity of three related but phylogenetically diverse sicariid toxins against a diverse panel of sphingolipid and lysolipid substrates. Two of the three showed significantly faster turnover of sphingolipids over lysolipids, andmore » all three showed a strong preference for positively charged (choline and/or ethanolamine) over neutral (glycerol and serine) headgroups. Strikingly, however, the enzymes vary widely in their preference for choline, the headgroup of both sphingomyelin and lysophosphatidylcholine, versus ethanolamine. An enzyme from Sicarius terrosus showed a strong preference for ethanolamine over choline, whereas two paralogous enzymes from Loxosceles arizonica either preferred choline or showed no significant preference. Intrigued by the novel substrate preference of the Sicarius enzyme, we solved its crystal structure at 2.1 Å resolution. Lastly, the evolution of variable substrate specificity may help explain the reduced dermonecrotic potential of some natural toxin variants, because mammalian sphingolipids use primarily choline as a positively charged headgroup; it may also be relevant for sicariid predatory behavior, because ethanolamine-containing sphingolipids are common in insect prey.« less

Variable Substrate Preference among Phospholipase D Toxins from Sicariid Spiders*

PubMed Central

Lajoie, Daniel M.; Roberts, Sue A.; Zobel-Thropp, Pamela A.; Delahaye, Jared L.; Bandarian, Vahe; Binford, Greta J.; Cordes, Matthew H. J.

2015-01-01

Venoms of the sicariid spiders contain phospholipase D enzyme toxins that can cause severe dermonecrosis and even death in humans. These enzymes convert sphingolipid and lysolipid substrates to cyclic phosphates by activating a hydroxyl nucleophile present in both classes of lipid. The most medically relevant substrates are thought to be sphingomyelin and/or lysophosphatidylcholine. To better understand the substrate preference of these toxins, we used 31P NMR to compare the activity of three related but phylogenetically diverse sicariid toxins against a diverse panel of sphingolipid and lysolipid substrates. Two of the three showed significantly faster turnover of sphingolipids over lysolipids, and all three showed a strong preference for positively charged (choline and/or ethanolamine) over neutral (glycerol and serine) headgroups. Strikingly, however, the enzymes vary widely in their preference for choline, the headgroup of both sphingomyelin and lysophosphatidylcholine, versus ethanolamine. An enzyme from Sicarius terrosus showed a strong preference for ethanolamine over choline, whereas two paralogous enzymes from Loxosceles arizonica either preferred choline or showed no significant preference. Intrigued by the novel substrate preference of the Sicarius enzyme, we solved its crystal structure at 2.1 Å resolution. The evolution of variable substrate specificity may help explain the reduced dermonecrotic potential of some natural toxin variants, because mammalian sphingolipids use primarily choline as a positively charged headgroup; it may also be relevant for sicariid predatory behavior, because ethanolamine-containing sphingolipids are common in insect prey. PMID:25752604

Crystal structure and texture changes during thermal cycling of TATB

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vogel, Sven C.; Yeager, John David

2015-02-20

Goals: Understand crystal structure and micro-structure changes during thermal cycling, understand reasons for ratcheting of TATB during thermal cycling, and Support of B61 LEP. Deliverables achieved: Completed in situ thermal cycling of loose powder and pressed pellet TATB on HIPPO, Quantified preferred orientation of pressed pellet, and quantified relative change of each of the six lattic parameters.

Structure and energetic basis of overrepresented λ light chain in systemic light chain amyloidosis patients.

PubMed

Zhao, Jun; Zhang, Baohong; Zhu, Jianwei; Nussinov, Ruth; Ma, Buyong

2018-06-01

Amyloid formation and deposition of immunoglobulin light-chain proteins in systemic amyloidosis (AL) cause major organ failures. While the κ light-chain is dominant (λ/κ=1:2) in healthy individuals, λ is highly overrepresented (λ/κ=3:1) in AL patients. The structural basis of the amyloid formation and the sequence preference are unknown. We examined the correlation between sequence and structural stability of dimeric variable domains of immunoglobulin light chains using molecular dynamics simulations of 24 representative dimer interfaces, followed by energy evaluation of conformational ensembles for 20 AL patients' light chain sequences. We identified a stable interface with displaced N-terminal residues, provides the structural basis for AL protein fibrils formation. Proline isomerization may cause the N-terminus to adopt amyloid-prone conformations. We found that λ light-chains prefer misfolded dimer conformation, while κ chain structures are stabilized by a natively folded dimer. Our study may facilitate structure-based small molecule and antibody design to inhibit AL. This article is part of a Special Issue entitled: Accelerating Precision Medicine through Genetic and Genomic Big Data Analysis edited by Yudong Cai & Tao Huang. Copyright © 2017 Elsevier B.V. All rights reserved.