1L Mark-IV Target Design Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koehler, Paul E.

This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

Habitat Design Considerations for Implementing Solar Particle Event Radiation Protection

NASA Technical Reports Server (NTRS)

Simon, Mathew A.; Clowdsley, Martha S.; Walker, Steven A.

2013-01-01

Radiation protection is an important habitat design consideration for human exploration missions beyond Low Earth Orbit. Fortunately, radiation shelter concepts can effectively reduce astronaut exposure for the relatively low proton energies of solar particle events, enabling moderate duration missions of several months before astronaut exposure (galactic cosmic ray and solar particle event) approaches radiation exposure limits. In order to minimize habitat mass for increasingly challenging missions, design of radiation shelters must minimize dedicated, single-purpose shielding mass by leveraging the design and placement of habitat subsystems, accommodations, and consumables. NASA's Advanced Exploration Systems RadWorks Storm Shelter Team has recently designed and performed radiation analysis on several low dedicated mass shelter concepts for a year-long mission. This paper describes habitat design considerations identified during the study's radiation analysis. These considerations include placement of the shelter within a habitat for improved protection, integration of human factors guidance for sizing shelters, identification of potential opportunities for habitat subsystems to compromise on individual subsystem performances for overall vehicle mass reductions, and pre-configuration of shelter components for reduced deployment times.

Statistical considerations on prognostic models for glioma

PubMed Central

Molinaro, Annette M.; Wrensch, Margaret R.; Jenkins, Robert B.; Eckel-Passow, Jeanette E.

2016-01-01

Given the lack of beneficial treatments in glioma, there is a need for prognostic models for therapeutic decision making and life planning. Recently several studies defining subtypes of glioma have been published. Here, we review the statistical considerations of how to build and validate prognostic models, explain the models presented in the current glioma literature, and discuss advantages and disadvantages of each model. The 3 statistical considerations to establishing clinically useful prognostic models are: study design, model building, and validation. Careful study design helps to ensure that the model is unbiased and generalizable to the population of interest. During model building, a discovery cohort of patients can be used to choose variables, construct models, and estimate prediction performance via internal validation. Via external validation, an independent dataset can assess how well the model performs. It is imperative that published models properly detail the study design and methods for both model building and validation. This provides readers the information necessary to assess the bias in a study, compare other published models, and determine the model's clinical usefulness. As editors, reviewers, and readers of the relevant literature, we should be cognizant of the needed statistical considerations and insist on their use. PMID:26657835

Permanent magnet motors

NASA Astrophysics Data System (ADS)

Richter, E.

1984-09-01

The work deals with the design and analysis study for the conceptual design of an economical high efficiency ac motor based on permanent magnets. The design and trade off studies have covered the material considerations, the design tradeoff options as well as transient and steady state performance considerations, and other options. The baseline comparison is the high efficiency induction motor. The permanent magnet (PM) motor must fit into the same frame size and surpass the induction motor on a life cost basis that includes 2.5 years of operation at a 50% duty cycle. It is shown that a motor based upon ferrite magnets does meet the objectives of the program in ratings of up to 25 hp. A 7.5 motor design is carried through the conceptual design stage.

78 FR 66941 - Design Considerations for Pivotal Clinical Investigations for Medical Devices; Guidance for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... assessment. In some cases, a PMA may include multiple studies designed to answer different scientific... designing clinical studies intended to support premarket submissions for medical devices and for FDA staff who review those submissions. This guidance document describes different study design principles...

Considerations for the Optimal Design of a Two-Way Interactive Distance Education Classroom.

ERIC Educational Resources Information Center

Gregg, Joe; Persichitte, Kay

To make effective use of a two-way interactive distance education system, classroom design should be a primary consideration. A properly designed classroom will enhance content objectives and increase acceptance of this type of instructional delivery. This paper describes key considerations for optimal design. Construction considerations include…

Urban Principle of Water Sensitive Design in Kampung Kamboja at Pontianak City

NASA Astrophysics Data System (ADS)

Hasriyanti, N.; Ryanti, E.

2017-07-01

This study will define the design principles of settlement area banks of the Kapuas Pontianak to approach the concept of water sensitive urban design (WSUD) in densely populated residential areas. Using a case study of a region densely located on the banks of the river with engineering literature to formulate the aspects taken into consideration and the components are arranged in the design, analysis descriptive paradigm rationalistic to identify the characteristics of residential areas riverbank with consideration of elements WSUD and formulate design principles residential area that is sensitive to water. This research is important to do because of problems related to the water management system in the settlement bank of the river in the city of Pontianak do not maximize. So that the primacy of this study contains several objectives to be achieved is to identify the characteristics of the settlement area riverbanks under consideration aspects areas design that is sensitive to water and principle areas design that will formulate the structure of the existing problems related to the needs of the community infrastructure facilities infrastructure neighborhoods and formulate and create guidelines for appropriate technology for integrated water management systems in the residential area of the riverbank and engineering design for the settlements are sensitive to water (WSUD). The final aim of the study is expected to achieve water management systems in residential areas by utilizing the abundant rainwater availability by using LID (Low Impact Development) through the concept of urban design that sensitive water

Designing Epigenome Editors: Considerations of Biochemical and Locus Specificities.

PubMed

Sen, Dilara; Keung, Albert J

2018-01-01

The advent of locus-specific protein recruitment technologies has enabled a new class of studies in chromatin biology. Epigenome editors enable biochemical modifications of chromatin at almost any specific endogenous locus. Their locus specificity unlocks unique information including the functional roles of distinct modifications at specific genomic loci. Given the growing interest in using these tools for biological and translational studies, there are many specific design considerations depending on the scientific question or clinical need. Here we present and discuss important design considerations and challenges regarding the biochemical and locus specificities of epigenome editors. These include how to account for the complex biochemical diversity of chromatin; control for potential interdependency of epigenome editors and their resultant modifications; avoid sequestration effects; quantify the locus specificity of epigenome editors; and improve locus specificity by considering concentration, affinity, avidity, and sequestration effects.

Design, economic and system considerations of large wind-driven generators

NASA Technical Reports Server (NTRS)

Jorgensen, G. E.; Lotker, M.; Meier, R. C.; Brierley, D.

1976-01-01

The increased search for alternative energy sources has lead to renewed interest and studies of large wind-driven generators. This paper presents the results and considerations of such an investigation. The paper emphasizes the concept selection of wind-driven generators, system optimization, control system design, safety aspects, economic viability on electric utility systems and potential electric system interfacing problems.

Solar array study for solar electric propulsion spacecraft for the Encke rendezvous mission

NASA Technical Reports Server (NTRS)

Sequeira, E. A.; Patterson, R. E.

1974-01-01

The work is described which was performed on the design, analysis and performance of a 20 kW rollup solar array capable of meeting the design requirements of a solar electric spacecraft for the 1980 Encke rendezvous mission. To meet the high power requirements of the proposed electric propulsion mission, solar arrays on the order of 186.6 sq m were defined. Because of the large weights involved with arrays of this size, consideration of array configurations is limited to lightweight, large area concepts with maximum power-to-weight ratios. Items covered include solar array requirements and constraints, array concept selection and rationale, structural and electrical design considerations, and reliability considerations.

Design Considerations for a Water Treatment System Utilizing Ultra-Violet Light Emitting Diodes

DTIC Science & Technology

2014-03-27

DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...the United States. ii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...DISTRIBUTION UNLIMITED. iii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING

Analytical considerations for study design

Treesearch

Barry R. Noon; William M. Block

1990-01-01

Studies of the foraging behaviors of birds have been largely descriptive and comparative. One might then expect studies with similar objectives to have similar study designs but that is not the case. Papers in this symposium that focused specifically on study design contain a diversity of biological perspectives. Similarly, there is no accord among statisticians on...

77 FR 30016 - Clinical Study Design and Performance of Hospital Glucose Sensors

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

...] Clinical Study Design and Performance of Hospital Glucose Sensors AGENCY: Food and Drug Administration, HHS... Sensors.'' The purpose of this public meeting is to discuss clinical study design considerations and performance metrics for innovative glucose sensors intended to be used in hospital point of care settings...

Essential considerations in developing attention control groups in behavioral research.

PubMed

Aycock, Dawn M; Hayat, Matthew J; Helvig, Ashley; Dunbar, Sandra B; Clark, Patricia C

2018-06-01

Attention control groups strengthen randomized controlled trials of behavioral interventions, but researchers need to give careful consideration to the attention control activities. A comparative effectiveness research framework provides an ideal opportunity for an attention control group as a supplement to standard care, so participants potentially receive benefit regardless of group assignment. The anticipated benefit of the control condition must be independent of the study outcome. Resources needed for attention control activities need to be carefully considered and ethical considerations carefully weighed. In this paper we address nine considerations for the design and implementation of attention control groups: (1) ensure attention control activities are not associated with the outcome; (2) avoid contamination of the intervention or control group; (3) design comparable control and intervention activities; (4) ensure researcher training to adequately administer both treatment arms; (5) design control activities to be interesting and acceptable to participants; (6) evaluate attention control activities; (7) consider additional resources needed to implement attention control activities; (8) quantifying the effects of attention control and intervention groups; and (9) ethical considerations with attention control groups. Examples from the literature and ongoing research are presented. Careful planning for the attention control group is as important as for the intervention group. Researchers can use the considerations presented here to assist in planning for the best attention control group for their study. © 2018 Wiley Periodicals, Inc.

Mariner Jupiter/Saturn 1977 infrared interferometer spectrometer (MJS' 77) design study

NASA Technical Reports Server (NTRS)

1974-01-01

A design study of the Infrared Interferometer Spectrometer and Radiometer (IRIS) instrument for the Mariner Jupiter/Saturn 1977 mission was conducted. The objective of the study was to investigate a number a potential problem areas identified in previous studies and to develop the instrument system designs along the lines providing for the optimum performance obtainable with the allowable budgets. The considerations for the optical design, mechanical design, and electronic design are examined.

Design Development Analyses in Support of a Heatpipe-Brayton Cycle Heat Exchanger

NASA Technical Reports Server (NTRS)

Steeve, Brian; VanDyke, Melissa; Majumdar, Alok; Nguyen, Dalton; Corley, Melissa; Guffee, Ray M.; Kapernick, Richard J.

2003-01-01

One of the power systems under consideration for nuclear electric propulsion or as a planetary surface power source is a heatpipe-cooled reactor coupled to a Brayton cycle. In this system, power is transferred from the heatpipes to the Brayton gas via a heat exchanger attached to the heatpipes. This paper discusses the fluid, thermal and structural analyses that were performed in support of the design of the heat exchanger to be tested in the SAFE-100 experimental program at Marshall Space Flight Center. A companion paper, "Mechanical Design and Fabrication of a SAFE-100 Heat Exchanger for use in NASA s Advanced Propulsion Thermal-hydraulic Simulator", presents the fabrication issues and prototyping studies that, together with these analyses, led to the development of this heat exchanger. An important consideration throughout the design development of the heat exchanger was its capability to be utilized for higher power and temperature applications. This paper also discusses this aspect of the design and presents designs for specific applications that are under consideration.

Understanding the metabolic and health effects of low-calorie sweeteners: methodological considerations and implications for future research

PubMed Central

Sylvetsky, Allison C.; Blau, Jenny E.; Rother, Kristina I.

2016-01-01

Consumption of foods, beverages, and packets containing low-calorie sweeteners (LCS) has increased markedly across gender, age, race/ethnicity, weight status, and socioeconomic subgroups. However, well-controlled intervention studies rigorously evaluating the health effects of LCS in humans are limited. One of the key questions is whether LCS are indeed a beneficial strategy for weight management and prevention of obesity. The current review discusses several methodological considerations in the design and interpretation of these studies. Specifically, we focus on the selection of study participants, inclusion of an appropriate control, importance of considering habitual LCS exposure, selection of specific LCS, dose and route of LCS administration, choice of study outcomes, and the context and generalizability of the study findings. These critical considerations will guide the design of future studies and thus assist in understanding the health effects of LCS. PMID:26936185

Understanding the metabolic and health effects of low-calorie sweeteners: methodological considerations and implications for future research.

PubMed

Sylvetsky, Allison C; Blau, Jenny E; Rother, Kristina I

2016-06-01

Consumption of foods, beverages, and packets containing low-calorie sweeteners (LCS) has increased markedly across gender, age, race/ethnicity, weight status, and socio-economic subgroups. However, well-controlled intervention studies rigorously evaluating the health effects of LCS in humans are limited. One of the key questions is whether LCS are indeed a beneficial strategy for weight management and prevention of obesity. The current review discusses several methodological considerations in the design and interpretation of these studies. Specifically, we focus on the selection of study participants, inclusion of an appropriate control, importance of considering habitual LCS exposure, selection of specific LCS, dose and route of LCS administration, choice of study outcomes, and the context and generalizability of the study findings. These critical considerations will guide the design of future studies and thus assist in understanding the health effects of LCS.

Key issues in application of composites to transport aircraft

NASA Technical Reports Server (NTRS)

Stone, M.

1978-01-01

The application of composite materials to transport aircraft was identified and reviewed including the major contributing disciplines of design, manufacturing, and processing. Factors considered include: crashworthiness considerations (structural integrity, postcrash fires, and structural fusing), electrical/avionics subsystems integration, lightning, and P-static protection design; manufacturing development, evaluation, selection, and refining of tooling and curing procedures; and major joint design considerations. Development of the DC-10 rudder, DC-10 vertical stabilizer, and the DC-9 wing study project was reviewed. The Federal Aviation Administration interface and the effect on component design of compliance with Federal Aviation Regulation 25 Composite Guidelines are discussed.

Volatile Organic Compound and Particulate Emission Studies of AF (Air Force) Paint Booth Facilities. Phase 1.

DTIC Science & Technology

1988-07-01

quantity of air which requires processing. Recirculation systems were designed for two of the painting facilities included in this study. In designing the...BACKGROUND AND PURPOSE .... ................ .... 57 B. DESIGN CONSIDERATIONS .... ............... .... 58 1. Safety Standards .......... ............... 58...65 5. Conceptual Design .... ................ ... 68 V CONCLUSIONS AND RECOMMENDATIONS ............... .. 72 A. CONCLUSIONS

The healthy men study: design and recruitment considerations for environmental epidemiologic studies in male reproductive health

EPA Science Inventory

Study Objective: To describe study conduct and response and participant characteristics. Design: Prospective cohort study. Setting: Participants were male partners of women enrolled in a community-based study of drinking water disinfection by-products and pregnancy healt...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Alternate design considerations. 177.340 Section 177.340... TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design, unusual form, or special materials, which cannot be reviewed or...

75 FR 47592 - Final Test Guideline; Product Performance of Skin-applied Insect Repellents of Insect and Other...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... considerations affecting the design and conduct of repellent studies when human subjects are involved. Any... recommendations for the design and execution of studies to evaluate the performance of pesticide products intended... recommends appropriate study designs and methods for selecting subjects, statistical analysis, and reporting...

Space Operations Center system analysis study extension. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1982-01-01

The analysis fo Space Operations Center (SOC) systems is summarized. Design considerations, configurations of the manned orbital space station, planned operational and research missions, and subsystem tradeoffs are considered. Integration into the space transportation system is discussed. A modular design concept permitting growth of the SOC as its functions are expanded is described. Additional considerations are special requirements for habitat modules, design modifications needed to operate in geosynchronous orbits, and use of the external tank for cryogenic propellant storage or as a pressurized hangar. A cost summary is presented.

77 FR 74196 - Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... document, which addresses safety achieved through drug product design, is the first in a series of planned...] Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication Errors... Considerations for Product Design to Minimize Medication Errors.'' The draft guidance provides sponsors of...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

Career Pathways of Athletic Directors: Consideration of the Impact of Diversity

ERIC Educational Resources Information Center

Armstrong, Lenora E.

2011-01-01

This study explored career pathways for becoming an athletic director (AD) at National Collegiate Athletic Association (NCAA) Divisions I, II, and, III member institutions with consideration of gender and race/ethnicity. The study employed an exploratory, descriptive research design using a quantitative electronic survey tapping a census of all…

Evaluating Effectiveness of a Frigate in an Anti-Air Warfare (AAW) Environment

DTIC Science & Technology

2016-06-01

missions to accomplish. Both studies are used in ship design to determine the ship’s required combat capabilities before finalizing the hull design. This...accomplish. Both studies are used in ship design to determine the ship’s required combat capabilities before finalizing the hull design. This...capabilities should be determined before the ship’s hull design is complete to make operational effectiveness independent from physical design considerations

Regulatory considerations in the design of comparative observational studies using propensity scores.

PubMed

Yue, Lilly Q

2012-01-01

In the evaluation of medical products, including drugs, biological products, and medical devices, comparative observational studies could play an important role when properly conducted randomized, well-controlled clinical trials are infeasible due to ethical or practical reasons. However, various biases could be introduced at every stage and into every aspect of the observational study, and consequently the interpretation of the resulting statistical inference would be of concern. While there do exist statistical techniques for addressing some of the challenging issues, often based on propensity score methodology, these statistical tools probably have not been as widely employed in prospectively designing observational studies as they should be. There are also times when they are implemented in an unscientific manner, such as performing propensity score model selection for a dataset involving outcome data in the same dataset, so that the integrity of observational study design and the interpretability of outcome analysis results could be compromised. In this paper, regulatory considerations on prospective study design using propensity scores are shared and illustrated with hypothetical examples.

Design of a high speed business transport

NASA Technical Reports Server (NTRS)

1990-01-01

The design of a High Speed Business Transport (HSBT) was considered by the Aeronautical Design Class during the academic year 1989 to 1990. The project was chosen to offer an opportunity to develop user friendliness for some computer codes such as WAVE DRAG, supplied by NASA/Langley, and to experiment with several design lessons developed by Dr. John McMasters and his colleages at Boeing. Central to these design lessons was an appeal to marketing and feasibility considerations. There was an emphasis upon simplified analytical techniques to study trades and to stimulate creative thinking before committing to extensive analytical activity. Two designs stood out among all the rest because of the depth of thought and consideration of alternatives. One design, the Aurora, used a fixed wing design to satisfy the design mission: the Viero used a swept wing configuration to overcome problems related to supersonic flight. A summary of each of these two designs is given.

Variations in Pedagogical Design of Massive Open Online Courses (MOOCs) across Disciplines

ERIC Educational Resources Information Center

Najafi, Hadieh; Rolheiser, Carol; Håklev, Stian; Harrison, Laurie

2017-01-01

Given that few studies have formally examined pedagogical design considerations of Massive Online Open Courses (MOOCs), this study explored variations in the pedagogical design of six MOOCs offered at the University of Toronto, while considering disciplinary characteristics and expectations of each MOOC. Using a framework (Neumann et al., 2002)…

Preparing Turnaround Leaders for High Needs Urban Schools

ERIC Educational Resources Information Center

Lochmiller, Chad R.; Chesnut, Colleen E.

2017-01-01

Purpose: The purpose of this paper is to describe the program structure and design considerations of a 25-day, full-time apprenticeship in a university-based principal preparation program. Design/Methodology/ Approach: The study used a qualitative case study design that drew upon interviews and focus groups with program participants as well as…

A vision for chronic disease prevention intervention research: report from a workshop.

PubMed

Ashbury, Frederick D; Little, Julian; Ioannidis, John P A; Kreiger, Nancy; Palmer, Lyle J; Relton, Clare; Taylor, Peter

2014-04-17

The Population Studies Research Network of Cancer Care Ontario hosted a strategic planning workshop to establish an agenda for a prevention intervention research program in Ontario, including priority topics for investigation and design considerations. The two-day workshop included: presentations on background papers developed to facilitate participants' preparation for and discussions in the workshop; keynote presentations on intervention research concerning primary prevention of chronic diseases, design and study implementation considerations; a dedicated session on critical and creative thinking to stimulate participation and discussion topics; break out groups to identify, discuss and present study ideas, designs, implementation considerations; and a consensus process to discuss and identify recommendations for research priorities and next steps. The retreat yielded the following recommendations: 1) develop an intervention research agenda that includes working with existing large-scale cohorts; 2) develop an intervention research agenda that includes novel research designs that could target individuals or groups; and 3) develop an intervention research agenda in which studies collect data on costs, define stakeholders, and ensure clear strategies for stakeholder engagement and knowledge transfer. The Population Studies Research Network will develop options from these recommendations and release a call for proposals in 2014 for intervention research pilot projects that reflect these recommendations. Pilot projects will be evaluated based on their fit with the retreat's recommendations, and their potential to scale up to full studies and application in practice.

Behavioral headache research: methodologic considerations and research design alternatives.

PubMed

Hursey, Karl G; Rains, Jeanetta C; Penzien, Donald B; Nash, Justin M; Nicholson, Robert A

2005-05-01

Behavioral headache treatments have garnered solid empirical support in recent years, but there is substantial opportunity to strengthen the next generation of studies with improved methods and consistency across studies. Recently, Guidelines for Trials of Behavioral Treatments for Recurrent Headache were published to facilitate the production of high-quality research. The present article compliments the guidelines with a discussion of methodologic and research design considerations. Since there is no research design that is applicable in every situation, selecting an appropriate research design is fundamental to producing meaningful results. Investigators in behavioral headache and other areas of research consider the developmental phase of the research, the principle objectives of the project, and the sources of error or alternative interpretations in selecting a design. Phases of clinical trials typically include pilot studies, efficacy studies, and effectiveness studies. These trials may be categorized as primarily pragmatic or explanatory. The most appropriate research designs for these different phases and different objectives vary on such characteristics as sample size and assignment to condition, types of control conditions, periods or frequency of measurement, and the dimensions along which comparisons are made. A research design also must fit within constraints on available resources. There are a large number of potential research designs that can be used and considering these characteristics allows selection of appropriate research designs.

Kinematic design considerations for minimally invasive surgical robots: an overview.

PubMed

Kuo, Chin-Hsing; Dai, Jian S; Dasgupta, Prokar

2012-06-01

Kinematic design is a predominant phase in the design of robotic manipulators for minimally invasive surgery (MIS). However, an extensive overview of the kinematic design issues for MIS robots is not yet available to both mechanisms and robotics communities. Hundreds of archival reports and articles on robotic systems for MIS are reviewed and studied. In particular, the kinematic design considerations and mechanism development described in the literature for existing robots are focused on. The general kinematic design goals, design requirements, and design preferences for MIS robots are defined. An MIS-specialized mechanism, namely the remote center-of-motion (RCM) mechanism, is revisited and studied. Accordingly, based on the RCM mechanism types, a classification for MIS robots is provided. A comparison between eight different RCM types is given. Finally, several open challenges for the kinematic design of MIS robotic manipulators are discussed. This work provides a detailed survey of the kinematic design of MIS robots, addresses the research opportunity in MIS robots for kinematicians, and clarifies the kinematic point of view to MIS robots as a reference for the medical community. Copyright © 2012 John Wiley & Sons, Ltd.

Design Considerations and Experimental Verification of a Rail Brake Armature Based on Linear Induction Motor Technology

NASA Astrophysics Data System (ADS)

Sakamoto, Yasuaki; Kashiwagi, Takayuki; Hasegawa, Hitoshi; Sasakawa, Takashi; Fujii, Nobuo

This paper describes the design considerations and experimental verification of an LIM rail brake armature. In order to generate power and maximize the braking force density despite the limited area between the armature and the rail and the limited space available for installation, we studied a design method that is suitable for designing an LIM rail brake armature; we considered adoption of a ring winding structure. To examine the validity of the proposed design method, we developed a prototype ring winding armature for the rail brakes and examined its electromagnetic characteristics in a dynamic test system with roller rigs. By repeating various tests, we confirmed that unnecessary magnetic field components, which were expected to be present under high speed running condition or when a ring winding armature was used, were not present. Further, the necessary magnetic field component and braking force attained the desired values. These studies have helped us to develop a basic design method that is suitable for designing the LIM rail brake armatures.

Matches, Mismatches, and Methods: Multiple-View Workflows for Energy Portfolio Analysis.

PubMed

Brehmer, Matthew; Ng, Jocelyn; Tate, Kevin; Munzner, Tamara

2016-01-01

The energy performance of large building portfolios is challenging to analyze and monitor, as current analysis tools are not scalable or they present derived and aggregated data at too coarse of a level. We conducted a visualization design study, beginning with a thorough work domain analysis and a characterization of data and task abstractions. We describe generalizable visual encoding design choices for time-oriented data framed in terms of matches and mismatches, as well as considerations for workflow design. Our designs address several research questions pertaining to scalability, view coordination, and the inappropriateness of line charts for derived and aggregated data due to a combination of data semantics and domain convention. We also present guidelines relating to familiarity and trust, as well as methodological considerations for visualization design studies. Our designs were adopted by our collaborators and incorporated into the design of an energy analysis software application that will be deployed to tens of thousands of energy workers in their client base.

Large scale prop-fan structural design study. Volume 2: Preliminary design of SR-7

NASA Technical Reports Server (NTRS)

Billman, L. C.; Gruska, C. J.; Ladden, R. M.; Leishman, D. K.; Turnberg, J. E.

1988-01-01

In recent years, considerable attention has been directed toward improving aircraft fuel consumption. Studies have shown that the inherent efficiency advantage that turboprop propulsion systems have demonstrated at lower cruise speeds may now be extended to the higher speeds of today's turbofan and turbojet-powered aircraft. To achieve this goal, new propeller designs will require features such as thin, high speed airfoils and aerodynamic sweep, features currently found only in wing designs for high speed aircraft. This is Volume 2 of a 2 volume study to establish structural concepts for such advanced propeller blades, to define their structural properties, to identify any new design, analysis, or fabrication techniques which were required, and to determine the structural tradeoffs involved with several blade shapes selected primarily on the basis of aero/acoustic design considerations. The feasibility of fabricating and testing dynamically scaled models of these blades for aeroelastic testing was also established. The preliminary design of a blade suitable for flight use in a testbed advanced turboprop was conducted and is described.

Barriers and Facilitators to Deaf Trauma Survivors' Help-Seeking Behavior: Lessons for Behavioral Clinical Trials Research

ERIC Educational Resources Information Center

Anderson, Melissa L.; Wolf Craig, Kelly S.; Ziedonis, Douglas M.

2017-01-01

Deaf individuals experience significant obstacles to participating in behavioral health research when careful consideration is not given to accessibility during the design of study methodology. To inform such considerations, we conducted an exploratory secondary analysis of a mixed-methods study that originally explored 16 Deaf trauma survivors'…

Applying a Conceptual Mini Game for Supporting Simple Mathematical Calculation Skills: Students' Perceptions and Considerations

ERIC Educational Resources Information Center

Panagiotakopoulos, Chris T.

2011-01-01

Mathematics is an area of study that particularly lacks student enthusiasm. Nevertheless, with the help of educational games, any phobias concerning mathematics can be considerably decreased and mathematics can become more appealing. In this study, an educational game addressing mathematics was designed, developed and evaluated by a sample of 33…

Secondary Students' Considerations of Variability in Measurement Activities Based on Authentic Practices

ERIC Educational Resources Information Center

Dierdorp, Adri; Bakker, Arthur; Ben-Zvi, Dani; Makar, Katie

2017-01-01

Measurement activities were designed in this study on the basis of authentic professional practices in which linear regression is used, to study considerations of variability by students in Grade 12 (aged 17-18). The question addressed in this article is: In what ways do secondary students consider variability within these measurement activities?…

Raising the Bar for Reproducible Science at the US Environmental Protection Agency Office of Research and Development

EPA Science Inventory

Considerable concern has been raised regarding research reproducibility both within and outside the scientific community. Several factors possibly contribute to a lack of reproducibility, including a failure to adequately employ statistical considerations during study design, bia...

The Design and Testing of Multimedia for Teaching Arithmetic to Deaf Learners

ERIC Educational Resources Information Center

Techaraungrong, Piyaporn; Suksakulchai, Surachai; Kaewprapan, Wacheerapan; Murphy, Elizabeth

2017-01-01

The purpose of the study reported on in this paper was to design and test multimedia for deaf and hard of hearing (DHH) learners. The study focused on counting, addition and subtraction with grade one (age 7) DHH learners in Thailand. The multimedia created for the study was informed by design considerations for DHH learners of arithmetic and…

Considerations for Explosively Driven Conical Shock Tube Design: Computations and Experiments

DTIC Science & Technology

2017-02-16

ARL-TR-7953 ● FEB 2017 US Army Research Laboratory Considerations for Explosively Driven Conical Shock Tube Design : Computations...The findings in this report are not to be construed as an official Department of the Army position unless so designated by other authorized...Considerations for Explosively Driven Conical Shock Tube Designs : Computations and Experiments by Joel B Stewart Weapons and Materials Research Directorate

System description and analysis. Part 1: Feasibility study for helicopter/VTOL wide-angle simulation image generation display system

NASA Technical Reports Server (NTRS)

1977-01-01

A preliminary design for a helicopter/VSTOL wide angle simulator image generation display system is studied. The visual system is to become part of a simulator capability to support Army aviation systems research and development within the near term. As required for the Army to simulate a wide range of aircraft characteristics, versatility and ease of changing cockpit configurations were primary considerations of the study. Due to the Army's interest in low altitude flight and descents into and landing in constrained areas, particular emphasis is given to wide field of view, resolution, brightness, contrast, and color. The visual display study includes a preliminary design, demonstrated feasibility of advanced concepts, and a plan for subsequent detail design and development. Analysis and tradeoff considerations for various visual system elements are outlined and discussed.

Fundamentals of Sports Analytics.

PubMed

Wasserman, Erin B; Herzog, Mackenzie M; Collins, Christy L; Morris, Sarah N; Marshall, Stephen W

2018-07-01

Recently, the importance of statistics and analytics in sports has increased. This review describes measures of sports injury and fundamentals of sports injury research with a brief overview of some of the emerging measures of sports performance. We describe research study designs that can be used to identify risk factors for injury, injury surveillance programs, and common measures of injury risk and association. Finally, we describe measures of physical performance and training and considerations for using these measures. This review provides sports medicine clinicians with an understanding of current research measures and considerations for designing sports injury research studies. Copyright © 2018 Elsevier Inc. All rights reserved.

Design and implementation of observational studies to measure disease burden with a focus on stroke.

PubMed

Howard, George; Howard, Virginia J

2018-02-01

Observational epidemiological studies have the dual goals of measuring disease burden and assessing the association between exposures and outcomes. This report focuses on the first of these goals and provides an overview of design considerations of commonly used approaches, specifically community surveillance studies, cross-sectional studies, and longitudinal cohort studies. Each of these designs has strengths and weaknesses, with no study design being superior in all cases. Rather, these designs are complementary to achieve a better understanding of the burden of stroke.

78 FR 24211 - Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... container labels and carton labeling design, is the second in a series of three planned guidance documents...] Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling Design To... entitled ``Safety Considerations for Container Labels and Carton Labeling Design to Minimize Medication...

Selection of a surface tension propellant management system for the Viking 75 Orbiter.

NASA Technical Reports Server (NTRS)

Dowdy, M. W.; Debrock, S. C.

1972-01-01

Discussion of the propellant management system requirements derived for the Viking 75 mission, and review of a series of surface tension propellant management system design concepts. The chosen concept is identified and its mission operation described. The ullage bubble and bulk liquid positioning characteristics are presented, along with propellant dynamic considerations entailed by thrust initiation/termination. Pressurization design considerations, required to assure minimum disturbance to the bulk propellant, are introduced as well as those of the tank ullage vent. Design provisions to assure liquid communication between tank ends are discussed. Results of a preliminary design study are presented, including mechanical testing requirements to assure structural integrity, propellant compatibility, and proper installation.

Design considerations for remotely piloted, high-altitude airplanes powered by microwave energy

NASA Technical Reports Server (NTRS)

Morris, C. E. K., Jr.

1984-01-01

Several types of systems have been considered in a design study of unmanned, microwave-powered, long-endurance, high-altitude airplanes. The study includes vehicles that use power from a continuously transmitted beam and other aircraft that receive intermittent power during cycles of boost-glide flight. Simple design algorithms are presented. Examples of sizing and performance analyses are used to suggest design-procedure guidelines.

Ranking of Cities According to Public Health Criteria: Pitfalls and Opportunities

PubMed Central

Ham, Sandra A.; Levin, Sarah; Zlot, Amy I.; Andrews, Richard R.; Miles, Rebecca

2004-01-01

Popular magazines often rank cities in terms of various aspects of quality of life. Such ranking studies can motivate people to visit or relocate to a particular city or increase the frequency with which they engage in healthy behaviors. With careful consideration of study design and data limitations, these efforts also can assist policymakers in identifying local public health issues. We discuss considerations in interpreting ranking studies that use environmental measures of a city population’s public health related to physical activity, nutrition, and obesity. Ranking studies such as those commonly publicized are constrained by statistical methodology issues and a lack of a scientific basis in regard to design. PMID:15053999

Production Design: Holding It Together.

ERIC Educational Resources Information Center

Connelly, James O.

1994-01-01

Discusses production design for videos. Outlines general considerations (opening, transitions, content areas, and closing) and specific considerations (typography, screen design, music, and sound effects). Offers an example. (SR)

Design considerations for the use of laser-plasma accelerators for advanced space radiation studies

NASA Astrophysics Data System (ADS)

Königstein, T.; Karger, O.; Pretzler, G.; Rosenzweig, J. B.; Hidding, B.; Hidding

2012-08-01

We present design considerations for the use of laser-plasma accelerators for mimicking space radiation and testing space-grade electronics. This novel application takes advantage of the inherent ability of laser-plasma accelerators to produce particle beams with exponential energy distribution, which is a characteristic shared with the hazardous relativistic electron flux present in the radiation belts of planets such as Earth, Saturn and Jupiter. Fundamental issues regarding laser-plasma interaction parameters, beam propagation, flux development, and experimental setup are discussed.

Design Considerations of Help Options in Computer-Based L2 Listening Materials Informed by Participatory Design

ERIC Educational Resources Information Center

Cárdenas-Claros, Mónica Stella

2015-01-01

This paper reports on the findings of two qualitative exploratory studies that sought to investigate design features of help options in computer-based L2 listening materials. Informed by principles of participatory design, language learners, software designers, language teachers, and a computer programmer worked collaboratively in a series of…

Design and analysis issues for economic analysis alongside clinical trials.

PubMed

Marshall, Deborah A; Hux, Margaret

2009-07-01

Clinical trials can offer a valuable and efficient opportunity to collect the health resource use and outcomes data for economic evaluation. However, economic and clinical studies differ fundamentally in the question they seek to answer. The design and analysis of trial-based cost-effectiveness studies require special consideration, which are reviewed in this article. Traditional randomized controlled trials, using an experimental design with a controlled protocol, are designed to measure safety and efficacy for product registration. Cost-effectiveness analysis seeks to measure effectiveness in the context of routine clinical practice, and requires collection of health care resources to allow estimation of cost over an equal timeframe for each treatment alternative. In assessing suitability of a trial for economic data collection, the comparator treatment and other protocol factors need to reflect current clinical practice and the trial follow-up must be sufficiently long to capture important costs and effects. The broadest available population and a measure of effectiveness reflecting important benefits for patients are preferred for economic analyses. Special analytical issues include dealing with missing and censored cost data, assessing uncertainty of the incremental cost-effectiveness ratio, and accounting for the underlying heterogeneity in patient subgroups. Careful consideration also needs to be given to data from multinational studies since practice patterns can differ across countries. Although clinical trials can be an efficient opportunity to collect data for economic evaluation, careful consideration of the suitability of the study design, and appropriate analytical methods must be applied to obtain rigorous results.

Review of physical activity measurement using accelerometers in older adults: considerations for research design and conduct.

PubMed

Murphy, Susan L

2009-02-01

Accelerometers are being increasingly used in studies of physical activity (PA) among older adults, however the use of these monitors requires some specialized knowledge and up-to-date information on technological innovations. The purpose of this review article is to provide researchers with a guide to some commonly-used accelerometers in order to better design and conduct PA research with older adults. A literature search was conducted to obtain all available literature on commonly-used accelerometers in older adult samples with specific attention to articles discussing research design. The use of accelerometers in older adults requires a basic understanding of the type being used, rationale for their placement, and attention to calibration when needed. The updated technology in some monitors should make study conduct less difficult, however comparison studies of the newer versus the older generation models will be needed. Careful considerations for design and conduct of accelerometer research as outlined in this review should help to enhance the quality and comparability of future research studies.

Large scale prop-fan structural design study. Volume 1: Initial concepts

NASA Technical Reports Server (NTRS)

Billman, L. C.; Gruska, C. J.; Ladden, R. M.; Leishman, D. K.; Turnberg, J. E.

1988-01-01

In recent years, considerable attention has been directed toward improving aircraft fuel consumption. Studies have shown that the inherent efficiency advantage that turboprop propulsion systems have demonstrated at lower cruise speeds may now be extended to the higher speeds of today's turbofan and turbojet-powered aircraft. To achieve this goal, new propeller designs will require features such as thin, high speed airfoils and aerodynamic sweep, features currently found only in wing designs for high speed aircraft. This is Volume 1 of a 2 volume study to establish structural concepts for such advanced propeller blades, to define their structural properties, to identify any new design, analysis, or fabrication techniques which were required, and to determine the structural tradeoffs involved with several blade shapes selected primarily on the basis of aero/acoustic design considerations. The feasibility of fabricating and testing dynamically scaled models of these blades for aeroelastic testing was also established. The preliminary design of a blade suitable for flight use in a testbed advanced turboprop was conducted and is described in Volume 2.

Design Considerations | Efficient Windows Collaborative

Science.gov Websites

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

Considerations for Designing Group Randomized Trials of Professional Development with Teacher Knowledge Outcomes

ERIC Educational Resources Information Center

Kelcey, Ben; Phelps, Geoffrey

2013-01-01

Despite recent shifts in research emphasizing the value of carefully designed experiments, the number of studies of teacher professional development with rigorous designs has lagged behind its student outcome counterparts. We outline a framework for the design of group randomized trials (GRTs) with teachers' knowledge as the outcome and…

Methodologic considerations in the design and analysis of nested case-control studies: association between cytokines and postoperative delirium.

PubMed

Ngo, Long H; Inouye, Sharon K; Jones, Richard N; Travison, Thomas G; Libermann, Towia A; Dillon, Simon T; Kuchel, George A; Vasunilashorn, Sarinnapha M; Alsop, David C; Marcantonio, Edward R

2017-06-06

The nested case-control study (NCC) design within a prospective cohort study is used when outcome data are available for all subjects, but the exposure of interest has not been collected, and is difficult or prohibitively expensive to obtain for all subjects. A NCC analysis with good matching procedures yields estimates that are as efficient and unbiased as estimates from the full cohort study. We present methodological considerations in a matched NCC design and analysis, which include the choice of match algorithms, analysis methods to evaluate the association of exposures of interest with outcomes, and consideration of overmatching. Matched, NCC design within a longitudinal observational prospective cohort study in the setting of two academic hospitals. Study participants are patients aged over 70 years who underwent scheduled major non-cardiac surgery. The primary outcome was postoperative delirium from in-hospital interviews and medical record review. The main exposure was IL-6 concentration (pg/ml) from blood sampled at three time points before delirium occurred. We used nonparametric signed ranked test to test for the median of the paired differences. We used conditional logistic regression to model the risk of IL-6 on delirium incidence. Simulation was used to generate a sample of cohort data on which unconditional multivariable logistic regression was used, and the results were compared to those of the conditional logistic regression. Partial R-square was used to assess the level of overmatching. We found that the optimal match algorithm yielded more matched pairs than the greedy algorithm. The choice of analytic strategy-whether to consider measured cytokine levels as the predictor or outcome-- yielded inferences that have different clinical interpretations but similar levels of statistical significance. Estimation results from NCC design using conditional logistic regression, and from simulated cohort design using unconditional logistic regression, were similar. We found minimal evidence for overmatching. Using a matched NCC approach introduces methodological challenges into the study design and data analysis. Nonetheless, with careful selection of the match algorithm, match factors, and analysis methods, this design is cost effective and, for our study, yields estimates that are similar to those from a prospective cohort study design.

Lunar Surface Mission Operations Scenario and Considerations

NASA Technical Reports Server (NTRS)

Arnold, Larissa S.; Torney, Susan E.; Rask, John Doug; Bleisath, Scott A.

2006-01-01

Planetary surface operations have been studied since the last visit of humans to the Moon, including conducting analog missions. Mission Operations lessons from these activities are summarized. Characteristics of forecasted surface operations are compared to current human mission operations approaches. Considerations for future designs of mission operations are assessed.

Spacelab software development and integration concepts study report. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

1973-01-01

Software considerations were developed for incorporation in the spacelab systems design, and include management concepts for top-down structured programming, composite designs for modular programs, and team management methods for production programming.

Conceptual design considerations and neutronics of lithium fall laser fusion target chambers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, W.R.; Thomson, W.B.

1978-05-31

Atomics International and Lawrence Livermore Laboratory are involved in the conceptual design of a laser fusion power plant incorporating the lithium fall target chamber. In this paper we discuss some of the more important design considerations for the target chamber and evaluate its nuclear performance. Sizing and configuration of the fall, hydraulic effects, and mechanical design considerations are addressed. The nuclear aspects examined include tritium breeding, energy deposition, and radiation damage.

Preliminary design polymeric materials experiment. [for space shuttles and Spacelab missions

NASA Technical Reports Server (NTRS)

Mattingly, S. G.; Rude, E. T.; Marshner, R. L.

1975-01-01

A typical Advanced Technology Laboratory mission flight plan was developed and used as a guideline for the identification of a number of experiment considerations. The experiment logistics beginning with sample preparation and ending with sample analysis are then overlaid on the mission in order to have a complete picture of the design requirements. The results of this preliminary design study fall into two categories. First specific preliminary designs of experiment hardware which is adaptable to a variety of mission requirements. Second, identification of those mission considerations which affect hardware design and will require further definition prior to final design. Finally, a program plan is presented which will provide the necessary experiment hardware in a realistic time period to match the planned shuttle flights. A bibliography of all material reviewed and consulted but not specifically referenced is provided.

Preliminary study of ground handling characteristics of Buoyant Quad Rotor (BQR) vehicles

NASA Technical Reports Server (NTRS)

Browning, R. G. E.

1980-01-01

A preliminary investigation of mooring concepts appropriate for heavy lift buoyant quad rotor (BQR) vehicles was performed. A review of the evolution of ground handling systems and procedures for all airship types is presented to ensure that appropriate consideration is given to past experiences. Two buoyant quad rotor designs are identified and described. An analysis of wind loads on a moored airship and the effects of these loads on vehicle design is provided. Four mooring concepts are assessed with respect to the airship design, wind loads and mooring site considerations. Basing requirements and applicability of expeditionary mooring at various operational scenarios are addressed.

Structural design considerations for the beam transmission optical system

NASA Technical Reports Server (NTRS)

Macneal, Paul D.; Lou, Michael C.

1993-01-01

The paper describes the JPL study leading to a baseline design of the Beam Transmission Optical System (BTOS), designed for the delivery of laser energy from earth to space targets. The study identified the driving environmental and functional requirements; developed a conceptual design of the BTOS telescope; and performed static, thermal distortion, and model analyses to verify that these requirements are met. The study also identified major areas of concern which should be investigated further.

Critical considerations when planning experimental in vivo studies in dental traumatology.

PubMed

Andreasen, Jens O; Andersson, Lars

2011-08-01

In vivo studies are sometimes needed to understand healing processes after trauma. For several reasons, not the least ethical, such studies have to be carefully planned and important considerations have to be taken into account about suitability of the experimental model, sample size and optimizing the accuracy of the analysis. Several manuscripts of in vivo studies are submitted for publication to Dental Traumatology and rejected because of inadequate design, methodology or insufficient documentation of the results. The authors have substantial experience in experimental in vivo studies of tissue healing in dental traumatology and share their knowledge regarding critical considerations when planning experimental in vivo studies. © 2011 John Wiley & Sons A/S.

Considerations for IEL Courseware Design and the Next Generation of E-Learning

ERIC Educational Resources Information Center

Sözcü, Ömer Faruk; Ipek, Ismail

2013-01-01

The purpose of this study is to discuss strategies for developing integrated e-learning (IEL) courseware based on instructional design and technology (IDT) models and approaches as well as new discussions of e-learning. For this purpose, the study begins with the selection of one or more IDT models to conduct an e-courseware design including IEL…

Design considerations for composite fuselage structure of commercial transport aircraft

NASA Technical Reports Server (NTRS)

Davis, G. W.; Sakata, I. F.

1981-01-01

The structural, manufacturing, and service and environmental considerations that could impact the design of composite fuselage structure for commercial transport aircraft application were explored. The severity of these considerations was assessed and the principal design drivers delineated. Technical issues and potential problem areas which must be resolved before sufficient confidence is established to commit to composite materials were defined. The key issues considered are: definition of composite fuselage design specifications, damage tolerance, and crashworthiness.

Designing Environments for Handicapped Children: A Design Guide and Case Study. First Edition.

ERIC Educational Resources Information Center

Moore, Gary T.; And Others

This guide addresses the planning and architectural design of play/learning environments for special needs children. The exceptional children discussed include those with most types of mild to severe handicaps and developmental disabilities. Specifically excluded from consideration are health impairments, severe psycho-emotional difficulties such…

Students' Knowledge Sources and Knowledge Sharing in the Design Studio--An Exploratory Study

ERIC Educational Resources Information Center

Chiu, Sheng-Hsiao

2010-01-01

Architectural design is a knowledge-intensive activity; however, students frequently lack sufficient knowledge when they practice design. Collaborative learning can supplement the students' insufficient expertise. Successful collaborative learning relies on knowledge sharing between students. This implies that the peers are a considerable design…

Feasibility study of a pressure fed engine for a water recoverable space shuttle booster Volume 2: Technical, phase A effort

NASA Technical Reports Server (NTRS)

1972-01-01

Design and systems considerations are presented on an engine concept selection for further preliminary design and program evaluation. These data have been prepared from a feasibility study of a pressure-fed engine for the water recoverable space shuttle booster.

Space station systems analysis study. Part 2, volume 3: Appendixes, Book 2: Supporting data (7 through 18)

NASA Technical Reports Server (NTRS)

1977-01-01

Topics discussed include: (1) design considerations for a MARS sample return laboratory module for space station investigations; (2) crew productivity as a function of work shift arrangement; (3) preliminary analysis of the local logistics problem on the space construction base; (4) mission hardware construction operational flows and timelines; (5) orbit transfer vehicle concept definition; (6) summary of results and findings of space processing working review; (7) crew and habitability subsystem (option L); (8) habitability subsystem considerations for shuttle tended option L; (9) orbiter utilization in manned sortie missions; (10) considerations in definition of space construction base standard module configuration (option L); (11) guidance, control, and navigation subsystems; and (12) system and design tradeoffs.

Using Critical Incidents of Instructional Design and Multimedia Production Activities to Investigate Instructional Designers' Current Practices and Roles

ERIC Educational Resources Information Center

Sugar, William A.; Luterbach, Kenneth J.

2016-01-01

Through consideration of critical incidents, this study analyzed 106 effective, ineffective and extraordinary instructional design and multimedia production (MP) activities discussed by 36 instructional design professionals. This evaluation provided insights into these professionals' best and not so best practices during the past 6 months.…

Design considerations for fiber composite structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1972-01-01

An overview of the design methodology for designing structural components from fiber composites is presented. In particular, the need for new conceptual structural designs for the future is discussed and the evolution of conceptual design is illustrated. Sources of design data, analysis and design procedures, and the basic components of structural fiber composites are cited and described. Examples of tradeoff studies and optimum designs are discussed and a simple structure is described in some detail.

Test plan : I-40 TTIS focus groups and personal interview

DOT National Transportation Integrated Search

1976-04-01

This provides specific design recommendations, design considerations, and construction techniques for the construction of lateral support systems and underpinning. The design considerations are presented for each technique or method (solider piles, s...

Recommended Values of Meteorological Factors to Be Considered in the Design of Aircraft Ice-Prevention Equipment

NASA Technical Reports Server (NTRS)

Jones, Alun R; Lewis, William

1949-01-01

Meteorological conditions conducive to aircraft icing are arranged in four classifications: three are associated with cloud structure and the fourth with freezing rain. The range of possible meteorological factors for each classification is discussed and specific values recommended for consideration in the design of ice-prevention equipment for aircraft are selected and tabulated. The values selected are based upon a study of the available observational data and theoretical considerations where observations are lacking. Recommendations for future research in the field are presented.

Study of ground handling characteristics of a maritime patrol airship

NASA Technical Reports Server (NTRS)

1981-01-01

Mooring concepts appropriate for maritime patrol airship (MPA) vehicles are investigated. The evolution of ground handling systems and procedures for all airship types is reviewed to ensure that appropriate consideration is given to past experiences. A tri-rotor maritime patrol airship is identified and described. Wind loads on a moored airship and the effects of these loads on vehicle design are analyzed. Several mooring concepts are assessed with respect to the airship design, wind loads, and mooring site considerations. Basing requirements and applicability of expeditionary mooring also are addressed.

Progress in performance enhancement methods for capacitive silicon resonators

NASA Astrophysics Data System (ADS)

Van Toan, Nguyen; Ono, Takahito

2017-11-01

In this paper, we review the progress in recent studies on the performance enhancement methods for capacitive silicon resonators. We provide information on various fabrication technologies and design considerations that can be employed to improve the performance of capacitive silicon resonators, including low motional resistance, small insertion loss, and high quality factor (Q). This paper contains an overview of device structures and working principles, fabrication technologies consisting of hermetic packaging, deep reactive-ion etching and neutral beam etching, and design considerations including mechanically coupled, movable electrode structures and piezoresistive heat engines.

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

Natural gas operations: considerations on process transients, design, and control.

PubMed

Manenti, Flavio

2012-03-01

This manuscript highlights tangible benefits deriving from the dynamic simulation and control of operational transients of natural gas processing plants. Relevant improvements in safety, controllability, operability, and flexibility are obtained not only within the traditional applications, i.e. plant start-up and shutdown, but also in certain fields apparently time-independent such as the feasibility studies of gas processing plant layout and the process design of processes. Specifically, this paper enhances the myopic steady-state approach and its main shortcomings with respect to the more detailed studies that take into consideration the non-steady state behaviors. A portion of a gas processing facility is considered as case study. Process transients, design, and control solutions apparently more appealing from a steady-state approach are compared to the corresponding dynamic simulation solutions. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Design of Orion Soil Impact Study using the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2010-01-01

Two conventional One Factor At a Time (OFAT) test matrices under consideration for an Orion Landing System subscale soil impact study are reviewed. Certain weaknesses in the designs, systemic to OFAT experiment designs generally, are identified. An alternative test matrix is proposed that is based in the Modern Design of Experiments (MDOE), which achieves certain synergies by combining the original two test matrices into one. The attendant resource savings are quantified and the impact on uncertainty is discussed.

Ethical Design of Intelligent Assistive Technologies for Dementia: A Descriptive Review.

PubMed

Ienca, Marcello; Wangmo, Tenzin; Jotterand, Fabrice; Kressig, Reto W; Elger, Bernice

2017-09-22

The use of Intelligent Assistive Technology (IAT) in dementia care opens the prospects of reducing the global burden of dementia and enabling novel opportunities to improve the lives of dementia patients. However, with current adoption rates being reportedly low, the potential of IATs might remain under-expressed as long as the reasons for suboptimal adoption remain unaddressed. Among these, ethical and social considerations are critical. This article reviews the spectrum of IATs for dementia and investigates the prevalence of ethical considerations in the design of current IATs. Our screening shows that a significant portion of current IATs is designed in the absence of explicit ethical considerations. These results suggest that the lack of ethical consideration might be a codeterminant of current structural limitations in the translation of IATs from designing labs to bedside. Based on these data, we call for a coordinated effort to proactively incorporate ethical considerations early in the design and development of new products.

Ergonomic Considerations for the Human Environment: Color Treatment, Lighting, and Furniture Selection.

ERIC Educational Resources Information Center

Robertson, Michelle M.

1992-01-01

Discusses ergonomic design considerations for library media centers. Specific design variables, including temperature and humidity, noise, illumination, color, and windows are discussed; and computer workstation design requirements are presented that address furniture and keyboard design, monitor and display features, software issues, and…

Design Considerations for Post-Acute Care mHealth: Patient Perspectives.

PubMed

Sanger, Patrick; Hartzler, Andrea; Lober, William B; Evans, Heather L; Pratt, Wanda

2014-01-01

Many current mobile health applications ("apps") and most previous research have been directed at management of chronic illnesses. However, little is known about patient preferences and design considerations for apps intended to help in a post-acute setting. Our team is developing an mHealth platform to engage patients in wound tracking to identify and manage surgical site infections (SSI) after hospital discharge. Post-discharge SSIs are a major source of morbidity and expense, and occur at a critical care transition when patients are physically and emotionally stressed. Through interviews with surgical patients who experienced SSI, we derived design considerations for such a post-acute care app. Key design qualities include: meeting basic accessibility, usability and security needs; encouraging patient-centeredness; facilitating better, more predictable communication; and supporting personalized management by providers. We illustrate our application of these guiding design considerations and propose a new framework for mHealth design based on illness duration and intensity.

Factors affecting consumer usage and acceptance of child restraints

DOT National Transportation Integrated Search

1983-09-01

This study was designed to focus on two factors with potential relevance to the child restraint device (CRD) usage problem: CRD design and directions for use; problems of initial users and repeated users were targeted for consideration. Ultimate obje...

Design consideration of resonance inverters with electro-technological application

NASA Astrophysics Data System (ADS)

Hinov, Nikolay

2017-12-01

This study presents design consideration of resonance inverters with electro-technological application. The presented methodology was achieved as a result of investigations and analyses of different types and working regimes of resonance inverters, made by the author. Are considered schemes of resonant inverters without inverse diodes. The first harmonic method is used in the analysis and design. This method for the case of inverters with electro-technological application gives very good accuracy. This does not require the use of a complex and heavy mathematical apparatus. The proposed methodology is easy to use and is suitable for use in training students in power electronics. Authenticity of achieved results is confirmed by simulating and physical prototypes research work.

Precision of Curriculum-Based Measurement Reading Data: Considerations for Multiple-Baseline Designs

ERIC Educational Resources Information Center

Klingbeil, David A.; Van Norman, Ethan R.; Nelson, Peter M.

2017-01-01

Single-case designs provide an established technology for evaluating the effects of academic interventions. Researchers interested in studying the long-term effects of reading interventions often use curriculum-based measures of reading (CBM-R) as they possess many of the desirable characteristics for use in a time-series design. The reliability…

What Works Clearinghouse Standards and Generalization of Single-Case Design Evidence

ERIC Educational Resources Information Center

Hitchcock, John H.; Kratochwill, Thomas R.; Chezan, Laura C.

2015-01-01

A recent review of existing rubrics designed to help researchers evaluate the internal and external validity of single-case design (SCD) studies found that the various options yield consistent results when examining causal arguments. The authors of the review, however, noted considerable differences across the rubrics when addressing the…

Trajectory Design Considerations for Small Body Touch-and-Go

NASA Technical Reports Server (NTRS)

Wallace, Mark; Broschart, Stephen; Bonfiglio, Eugene; Bhaskharan, Shyam; Cangahuala, Alberto

2011-01-01

Outline: (1) Trajectory Description (2) Design Drivers: (2a) Dynamics (2b) Environment (2c) Spacecraft and Ground and System Capabilities (2d) Mission Objectives (3) Design Choices (4) Historical Precedents (5) Case Studies. What is Touch-and-Go (TAG)? (1) Descent to the surface (2) Brief contact (3) Ascends to a safe distance

Participatory design of probability-based decision support tools for in-hospital nurses.

PubMed

Jeffery, Alvin D; Novak, Laurie L; Kennedy, Betsy; Dietrich, Mary S; Mion, Lorraine C

2017-11-01

To describe nurses' preferences for the design of a probability-based clinical decision support (PB-CDS) tool for in-hospital clinical deterioration. A convenience sample of bedside nurses, charge nurses, and rapid response nurses (n = 20) from adult and pediatric hospitals completed participatory design sessions with researchers in a simulation laboratory to elicit preferred design considerations for a PB-CDS tool. Following theme-based content analysis, we shared findings with user interface designers and created a low-fidelity prototype. Three major themes and several considerations for design elements of a PB-CDS tool surfaced from end users. Themes focused on "painting a picture" of the patient condition over time, promoting empowerment, and aligning probability information with what a nurse already believes about the patient. The most notable design element consideration included visualizing a temporal trend of the predicted probability of the outcome along with user-selected overlapping depictions of vital signs, laboratory values, and outcome-related treatments and interventions. Participants expressed that the prototype adequately operationalized requests from the design sessions. Participatory design served as a valuable method in taking the first step toward developing PB-CDS tools for nurses. This information about preferred design elements of tools that support, rather than interrupt, nurses' cognitive workflows can benefit future studies in this field as well as nurses' practice. Published by Oxford University Press on behalf of the American Medical Informatics Association 2017. This work is written by US Government employees and is in the public domain in the United States.

Flight deck design and pilot selection: anthropometric considerations.

PubMed

Buckle, P W; David, G C; Kimber, A C

1990-12-01

Safe and successful operation of flight displays and controls is, in part, dependent on the anthropometric characteristics of the pilots with respect to the design of a particular aircraft. This paper describes the approach required to optimise this fit and provides guidelines for both those responsible for design and those who select pilot recruits. The major results reported are those for a British population, although the aircraft considered (Boeing 737-200, 747, 757 and Lockheed TriStar) are used by airlines throughout the world. The study shows that limitations in design considerably reduce the pool of potential recruits with the appropriate anthropometric characteristics. The selection criteria, based on functional seated eye height, might exclude 73% of the British, 19-65-year-old female population and 13% of the male population.

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship-Quasi-Experimental Designs.

PubMed

Schweizer, Marin L; Braun, Barbara I; Milstone, Aaron M

2016-10-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt, nonrandomized interventions. Quasi-experimental studies can be categorized into 3 major types: interrupted time-series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship, including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. Infect Control Hosp Epidemiol 2016;1-6.

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship – Quasi-Experimental Designs

PubMed Central

Schweizer, Marin L.; Braun, Barbara I.; Milstone, Aaron M.

2016-01-01

Quasi-experimental studies evaluate the association between an intervention and an outcome using experiments in which the intervention is not randomly assigned. Quasi-experimental studies are often used to evaluate rapid responses to outbreaks or other patient safety problems requiring prompt non-randomized interventions. Quasi-experimental studies can be categorized into three major types: interrupted time series designs, designs with control groups, and designs without control groups. This methods paper highlights key considerations for quasi-experimental studies in healthcare epidemiology and antimicrobial stewardship including study design and analytic approaches to avoid selection bias and other common pitfalls of quasi-experimental studies. PMID:27267457

Developing Communication Skills: General Considerations and Specific Techniques.

ERIC Educational Resources Information Center

Joiner, Elizabeth Garner; Westphal, Patricia Barney, Ed.

This practical book is designed for the classroom teacher of a second or foreign language at any level. The articles are grouped into two distinct but interdependent sections on general considerations and specific techniques. The contents of the first section are as follows: "Moi Tarzan, Vous Jane?: A Study of Communicative Competence" by P.B.…

Sociolinguistic and Measurement Considerations for Construction of Armed Services Selection Batteries.

DTIC Science & Technology

1977-12-01

The objective of this study is to identify potential sources of linguistics bias in Armed Forces aptitude tests. General aspects of a sociolinguistic ...conclusion summarizes specific considerations that should be given to sociolinguistic aspects of aptitude tests and suggests ways in which this anlaysis may be followed up by test designers and test interpreters. (Author)

Configuration study for a 30 GHz monolithic receive array: Technical assessment

NASA Technical Reports Server (NTRS)

Nester, W. H.; Cleaveland, B.; Edward, B.; Gotkis, S.; Hesserbacker, G.; Loh, J.; Mitchell, B.

1984-01-01

The current status of monolithic microwave integrated circuits (MMICs) in phased array feeds is discussed from the point of view of cost performance, reliability, and design considerations. Transitions to MMICs, compatible antenna radiating elements and reliability considerations are addressed. Hybrid antennas, feed array antenna technology, and offset reflectors versus phased arrays are examined.

Investigation of Engineering and Design Considerations in Selecting Conveyors for Densified Refuse-Derived Fuel (dRDF) and dRDF: Coal Mixtures.

DTIC Science & Technology

1981-08-01

or discharge paths of material over the end pulley of a conveyor are important to the proper design and function of discharge chutes , wear plates or...8217 ’iESL-TR-81-58 INVESTIGATION OF ENGINEERING AND DESIGN CONSIDERATIONS IN SELECTING CONVEYORS FOR DENSIFIED REFUSE-DERIVED FUEL (dRDF) AND dRDF: COAL...Engineering and Design Final Report Considerations in Selecting Conveyors for JUN 1980 - SEP 1981 Densified Refuse-Derived Fuel (dRDF) and 6. PERFORMING ORG

Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

NASA Technical Reports Server (NTRS)

Interbartolo, Michael

2009-01-01

Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

Design and analysis of a keel latch for use on the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Calvert, John; Stinson, Melanie

1986-01-01

The mechanical design of the keel latch is discussed, as well as the stress analysis of the keel latch. Background information; mechanical design requirements; some of the initial design considerations; the design considerations that led to the selection of the final design; the mechanics of the final design; testing that has been and will be accomplished to verify that design requirements have been met; and future tests are discussed.

Tungsten fiber reinforced superalloy composite high temperature component design considerations

NASA Technical Reports Server (NTRS)

Winsa, E. A.

1982-01-01

Tungsten fiber reinforced superalloy composites (TFRS) are intended for use in high temperature turbine components. Current turbine component design methodology is based on applying the experience, sometimes semiempirical, gained from over 30 years of superalloy component design. Current composite component design capability is generally limited to the methodology for low temperature resin matrix composites. Often the tendency is to treat TFRS as just another superalloy or low temperature composite. However, TFRS behavior is significantly different than that of superalloys, and the high environment adds consideration not common in low temperature composite component design. The methodology used for preliminary design of TFRS components are described. Considerations unique to TFRS are emphasized.

Representative sets of design hydrographs for ungauged catchments: A regional approach using probabilistic region memberships

NASA Astrophysics Data System (ADS)

Brunner, Manuela Irene; Seibert, Jan; Favre, Anne-Catherine

2018-02-01

Traditional design flood estimation approaches have focused on peak discharges and have often neglected other hydrograph characteristics such as hydrograph volume and shape. Synthetic design hydrograph estimation procedures overcome this deficiency by jointly considering peak discharge, hydrograph volume, and shape. Such procedures have recently been extended to allow for the consideration of process variability within a catchment by a flood-type specific construction of design hydrographs. However, they depend on observed runoff time series and are not directly applicable in ungauged catchments where such series are not available. To obtain reliable flood estimates, there is a need for an approach that allows for the consideration of process variability in the construction of synthetic design hydrographs in ungauged catchments. In this study, we therefore propose an approach that combines a bivariate index flood approach with event-type specific synthetic design hydrograph construction. First, regions of similar flood reactivity are delineated and a classification rule that enables the assignment of ungauged catchments to one of these reactivity regions is established. Second, event-type specific synthetic design hydrographs are constructed using the pooled data divided by event type from the corresponding reactivity region in a bivariate index flood procedure. The approach was tested and validated on a dataset of 163 Swiss catchments. The results indicated that 1) random forest is a suitable classification model for the assignment of an ungauged catchment to one of the reactivity regions, 2) the combination of a bivariate index flood approach and event-type specific synthetic design hydrograph construction enables the consideration of event types in ungauged catchments, and 3) the use of probabilistic class memberships in regional synthetic design hydrograph construction helps to alleviate the problem of misclassification. Event-type specific synthetic design hydrograph sets enable the inclusion of process variability into design flood estimation and can be used as a compromise between single best estimate synthetic design hydrographs and continuous simulation studies.

The use of engineering design scenarios to assess student knowledge of global, societal, economic, and environmental contexts

NASA Astrophysics Data System (ADS)

McKenna, Ann F.; Hynes, Morgan M.; Johnson, Amy M.; Carberry, Adam R.

2016-07-01

Product archaeology as an educational approach asks engineering students to consider and explore the broader societal and global impacts of a product's manufacturing, distribution, use, and disposal on people, economics, and the environment. This study examined the impact of product archaeology in a project-based engineering design course on student attitudes and perceptions about engineering and abilities to extend and refine knowledge about broader contexts. Two design scenarios were created: one related to dental hygiene and one related to vaccination delivery. Design scenarios were used to (1) assess knowledge of broader contexts, and (2) test variability of student responses across different contextual situations. Results from pre- to post-surveying revealed improved student perceptions of knowledge of broader contexts. Significant differences were observed between the two design scenarios. The findings support the assumption that different design scenarios elicit consideration of different contexts and design scenarios can be constructed to target specific contextual considerations.

Single-case research design in pediatric psychology: considerations regarding data analysis.

PubMed

Cohen, Lindsey L; Feinstein, Amanda; Masuda, Akihiko; Vowles, Kevin E

2014-03-01

Single-case research allows for an examination of behavior and can demonstrate the functional relation between intervention and outcome in pediatric psychology. This review highlights key assumptions, methodological and design considerations, and options for data analysis. Single-case methodology and guidelines are reviewed with an in-depth focus on visual and statistical analyses. Guidelines allow for the careful evaluation of design quality and visual analysis. A number of statistical techniques have been introduced to supplement visual analysis, but to date, there is no consensus on their recommended use in single-case research design. Single-case methodology is invaluable for advancing pediatric psychology science and practice, and guidelines have been introduced to enhance the consistency, validity, and reliability of these studies. Experts generally agree that visual inspection is the optimal method of analysis in single-case design; however, statistical approaches are becoming increasingly evaluated and used to augment data interpretation.

Important considerations for designing and reporting epidemiologic and clinical studies in dental traumatology.

PubMed

Andersson, Lars; Andreasen, Jens O

2011-08-01

The purpose of this article is to suggest important considerations for epidemiologic and clinical studies in the field of dental traumatology. The article is based on the authors' experiences from research in this field and editorial board work for the scientific journal Dental Traumatology. Examples are given of issues where development is important. The importance of planning ahead of the study and consulting with experts in other fields is emphasized. © 2011 John Wiley & Sons A/S.

Probe interface design consideration. [for interplanetary spacecraft missions

NASA Technical Reports Server (NTRS)

Casani, E. K.

1974-01-01

Interface design between a probe and a spacecraft requires not only technical considerations but also management planning and mission analysis interactions. Two further aspects of importance are the flyby versus the probe trade-off, and the relay link design and data handling optimization.

Digital flight control research

NASA Technical Reports Server (NTRS)

Potter, J. E.; Stern, R. G.; Smith, T. B.; Sinha, P.

1974-01-01

The results of studies which were undertaken to contribute to the design of digital flight control systems, particularly for transport aircraft are presented. In addition to the overall design considerations for a digital flight control system, the following topics are discussed in detail: (1) aircraft attitude reference system design, (2) the digital computer configuration, (3) the design of a typical digital autopilot for transport aircraft, and (4) a hybrid flight simulator.

Particulate Matter Filtration Design Considerations for Crewed Spacecraft Life Support Systems

NASA Technical Reports Server (NTRS)

Agui, Juan H.; Vijayakumar, R.; Perry, Jay L.

2016-01-01

Particulate matter filtration is a key component of crewed spacecraft cabin ventilation and life support system (LSS) architectures. The basic particulate matter filtration functional requirements as they relate to an exploration vehicle LSS architecture are presented. Particulate matter filtration concepts are reviewed and design considerations are discussed. A concept for a particulate matter filtration architecture suitable for exploration missions is presented. The conceptual architecture considers the results from developmental work and incorporates best practice design considerations.

Practicalities and Research Considerations for Conducting Childhood Obesity Prevention Interventions with Families

PubMed Central

Morgan, Philip J.; Jones, Rachel A.; Collins, Clare E.; Hesketh, Kylie D.; Young, Myles D.; Burrows, Tracy L.; Magarey, Anthea M.; Brown, Helen L.; Hinkley, Trina; Perry, Rebecca A.; Brennan, Leah; Spence, Alison C.; Campbell, Karen J.

2016-01-01

Internationally, childhood obesity is a major public health concern. Given the established difficulties in treating obesity, designing and evaluating effective obesity prevention interventions are research priorities. As parents play a crucial role in establishing positive health behaviours in children, they are a key target for child obesity prevention programs. However, recruiting and engaging parents in such interventions can be a considerable challenge for researchers and practitioners. Members of the ‘Parenting, Child Behaviour and Well-being’ stream of the Australasian Child and Adolescent Obesity Research Network (ACAORN) have considerable and varied expertise in conducting such interventions and can provide insights into addressing these challenges. This paper aims to highlight considerations regarding the design, implementation, and evaluation of obesity prevention interventions with families and provide practical insights and recommendations for researchers and practitioners conducting family-based research in this area. Case studies of three family-based interventions conducted by ACAORN members are highlighted to provide examples and contextualise the recommendations proposed. PMID:27834820

Design and implementation of monitoring studies to evaluate the success of ecological restoration on wildlife

Treesearch

William M. Block; Alan B. Franklin; James P. Ward; Joseph L. Ganey; Gary C. White

2001-01-01

Restoration projects are often developed with little consideration for understanding their effects on wildlife. We contend, however, that monitoring treatment effects on wildlife should be an integral component of the design and execution of any management activity, including restoration. Thus, we provide a conceptual framework for the design and implementation of...

Design considerations and rationale of a multi-center trial to sustain weight loss: the Weight Loss Maintenance Trial.

PubMed

Brantley, Phillip; Appel, Lawrence; Hollis, Jack; Stevens, Victor; Ard, Jamy; Champagne, Catherine; Elmer, Patricia; Harsha, David; Myers, Valerie; Proschan, Michael; William, Vollmer; Svetkey, Laura

2008-01-01

The Weight Loss Maintenance Trial (WLM) is a multi-center, randomized, controlled trial that compares the effects of two 30-month maintenance interventions, i.e., Personal Contact (PC) and Interactive Technology (IT) to a self-directed usual care control group (SD), in overweight or obese individuals who are at high risk for cardiovascular disease. This paper provides an overview of the design and methods, and design considerations and lessons learned from this trial. All participants received a 6-month behavioral weight loss program consisting of weekly group sessions. Participants who lost 4 kg were randomized to one of three conditions (PC, IT, or SD). The PC condition provided monthly contacts with an interventionist primarily via telephone and quarterly face-to-face visits. The IT condition provided frequent, individualized contact through a tailored, website system. Both the PC and IT maintenance programs encouraged the DASH dietary pattern and employed theory-based behavioral techniques to promote maintenance. Design considerations included choice of study population, frequency and type of intervention visits, and choice of primary outcome. Overweight or obese persons with CVD risk factors were studied. The pros and cons of studying this population while excluding others are presented. We studied intervention contact strategies that made fewer demands on participant time and travel, while providing frequent opportunities for interaction. The primary outcome variable for the trial was change in weight from randomization to end of follow-up (30 months). Limits to generalizability are discussed. Individuals in need of weight loss strategies may have been excluded due to barriers associated with internet use. Other participants may have been excluded secondary to a comorbid condition. This paper highlights the design and methods of WLM and informs readers of discussions of critical issues and lessons learned from the trial.

Methodological considerations in observational comparative effectiveness research for implantable medical devices: an epidemiologic perspective.

PubMed

Jalbert, Jessica J; Ritchey, Mary Elizabeth; Mi, Xiaojuan; Chen, Chih-Ying; Hammill, Bradley G; Curtis, Lesley H; Setoguchi, Soko

2014-11-01

Medical devices play a vital role in diagnosing, treating, and preventing diseases and are an integral part of the health-care system. Many devices, including implantable medical devices, enter the market through a regulatory pathway that was not designed to assure safety and effectiveness. Several recent studies and high-profile device recalls have demonstrated the need for well-designed, valid postmarketing studies of medical devices. Medical device epidemiology is a relatively new field compared with pharmacoepidemiology, which for decades has been developed to assess the safety and effectiveness of medications. Many methodological considerations in pharmacoepidemiology apply to medical device epidemiology. Fundamental differences in mechanisms of action and use and in how exposure data are captured mean that comparative effectiveness studies of medical devices often necessitate additional and different considerations. In this paper, we discuss some of the most salient issues encountered in conducting comparative effectiveness research on implantable devices. We discuss special methodological considerations regarding the use of data sources, exposure and outcome definitions, timing of exposure, and sources of bias. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Current Design Criteria for MMOD Impact of Metallic Pressurized Tanks

NASA Technical Reports Server (NTRS)

Schonberg, William P.; Hull, Scott M.

2016-01-01

Most spacecraft have at least one pressurized vessel on board. For robotic spacecraft, it is usually a liquid propellant tank or battery. For human spacecraft, there are also pressurized living quarters and life-support systems. One of the design considerations of such spacecraft is the possible damage that might occur in the event of an on-orbit impact by a micrometeoroid or orbital debris (MMOD) particle. While considerable energy and effort has been expended in the study of the response of nonpressurized spacecraft components to these kinds of impacts, relatively few studies have been conducted on the pressurized elements of such spacecraft. In addition, the design criteria currently used by the National Aeronautics and Space Administration (NASA) for pressurized tanks operating in the MMOD environment have not been tested or scrutinized since they were first proposed nearly 45 years ago. This paper reviews current NASA design criteria for pressurized vessels and offers suggestions for next steps in their further development.

Effects of Social Supports on the Career Choice Consideration of Chinese Farmers: A Social Cognitive Perspective

ERIC Educational Resources Information Center

Zhao, Li

2012-01-01

Drawing from social cognitive career theory (Lent, Brown, & Hackett, 1994), this study explored social supports' influence on the career choice consideration of farmers during China's current process of urbanization. A questionnaire was designed based on interviews with 140 people and a pretest with a sample of 419 participants. A total of 628…

METHODS FOR INTEGRATING ENVIRONMENTAL CONSIDERATIONS INTO CHEMICAL PROCESS DESIGN DECISIONS

EPA Science Inventory

The objective of this cooperative agreement was to postulate a means by which an engineer could routinely include environmental considerations in day-to-day conceptual design problems; a means that could easily integrate with existing design processes, and thus avoid massive retr...

STORMWATER BEST MANAGEMENT PRACTICES DESIGN GUIDE VOLUME 1 - GENERAL CONSIDERATIONS

EPA Science Inventory

This document is Volume 1 of a three volume series that provides guidance on the selection and design of stormwater management Best Management Practices (BMPs). This first volume provides general considerations associated with the selection and design of BMPs.
Volume I provi...

Defining Operational Space Suit Requirements for Commercial Orbital Spaceflight

NASA Technical Reports Server (NTRS)

Alpert, Brian K.

2015-01-01

As the commercial spaceflight industry transitions from suborbital brevity to orbital outposts, spacewalking will become a major consideration for tourists, scientists, and hardware providers. The challenge exists to develop a space suit designed for the orbital commercial spaceflight industry. The unique needs and requirements of this industry will drive space suit designs and costs that are unlike any existing product. Commercial space tourists will pay for the experience of a lifetime, while scientists may not be able to rely on robotics for all operations and external hardware repairs. This study was aimed at defining space suit operational and functional needs across the spectrum of spacewalk elements, identifying technical design drivers and establishing appropriate options. Recommendations from the analysis are offered for consideration

Empirical Studies of the Value of Algorithm Animation in Algorithm Understanding

DTIC Science & Technology

1993-08-01

defines program visualization as "the use of the technology of interactive graphics and the crafts of graphic design , typography , animation and...classroom, considerable thought must go into the design of the animation. Guidelines exist for the design of interfaces and for the design of graphical presen...principles are learned which may be applied to several related problem situations. 2.3 Design of Pictures To obtain the maximum benefit of graphics

Getting started in research: designing and preparing to conduct a research study.

PubMed

Macfarlane, Matthew D; Kisely, Steve; Loi, Samantha; Macfarlane, Stephen; Merry, Sally; Parker, Stephen; Power, Brian; Siskind, Dan; Smith, Geoff; Looi, Jeffrey C

2015-02-01

To discuss common pitfalls and useful tips in designing a quantitative research study, the importance and process of ethical approval, and consideration of funding. Through careful planning, based on formulation of a research question, early career researchers can design and conduct quantitative research projects within the framework of the Scholarly Project or in their own independent projects. © The Royal Australian and New Zealand College of Psychiatrists 2014.

MIUS community conceptual design study

NASA Technical Reports Server (NTRS)

Fulbright, B. E.

1976-01-01

The feasibility, practicality, and applicability of the modular integrated utility systems (MIUS) concept to a satellite new-community development with a population of approximately 100,000 were analyzed. Two MIUS design options, the 29-MIUS-unit (option 1) and the 8-MIUS-unit (option 2) facilities were considered. Each resulted in considerable resource savings when compared to a conventional utility system. Economic analyses indicated that the total cash outlay and operations and maintenance costs for these two options were considerably less than for a conventional system. Computer analyses performed in support of this study provided corroborative data for the study group. An environmental impact assessment was performed to determine whether the MIUS meets or will meet necessary environmental standards. The MIUS can provide improved efficiency in the conservation of natural resources while not adversely affecting the physical environment.

Optimizing adaptive design for Phase 2 dose-finding trials incorporating long-term success and financial considerations: A case study for neuropathic pain.

PubMed

Gao, Jingjing; Nangia, Narinder; Jia, Jia; Bolognese, James; Bhattacharyya, Jaydeep; Patel, Nitin

2017-06-01

In this paper, we propose an adaptive randomization design for Phase 2 dose-finding trials to optimize Net Present Value (NPV) for an experimental drug. We replace the traditional fixed sample size design (Patel, et al., 2012) by this new design to see if NPV from the original paper can be improved. Comparison of the proposed design to the previous design is made via simulations using a hypothetical example based on a Diabetic Neuropathic Pain Study. Copyright © 2017 Elsevier Inc. All rights reserved.

SNG completes deepest underwater pipelay in Gulf of Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vogt, G.B.

1992-08-24

This paper reports that gas began flowing this spring in the deepest underwater, large-diameter pipeline in the U.S. Gulf of Mexico. Water depth along the route of the pipeline varies from approximately 460 ft at the Alabaster platform, increasing to the record depth of 1,220 ft in the Mississippi Canyon area, and decreasing to negligible water depth at the landfall site southwest of Venice. The SNG Mississippi Canyon Block 397 pipeline project exemplifies how a pipeline project can encounter an array of conditions which prompt special design considerations and installation techniques. Important considerations for this project were related to pipemore » properties, anti-corrosion and weight coatings, span and buckle considerations, and installation equipment. A team effort was used to study, research, test, design, and install this pipeline.« less

Shuttle considerations for the design of large space structures

NASA Technical Reports Server (NTRS)

Roebuck, J. A., Jr.

1980-01-01

Shuttle related considerations (constraints and guidelines) are compiled for use by designers of a potential class of large space structures which are transported to orbit and, deployed, fabricated or assembled in space using the Space Shuttle Orbiter. Considerations of all phases of shuttle operations from launch to ground turnaround operations are presented. Design of large space structures includes design of special construction fixtures and support equipment, special stowage cradles or pallets, special checkout maintenance, and monitoring equipment, and planning for packaging into the orbiter of all additional provisions and supplies chargeable to payload. Checklists of design issues, Shuttle capabilities constraints and guidelines, as well as general explanatory material and references to source documents are included.

Raising the bar for reproducible science at the U.S. Environmental Protection Agency Office of Research and Development.

PubMed

George, Barbara Jane; Sobus, Jon R; Phelps, Lara P; Rashleigh, Brenda; Simmons, Jane Ellen; Hines, Ronald N

2015-05-01

Considerable concern has been raised regarding research reproducibility both within and outside the scientific community. Several factors possibly contribute to a lack of reproducibility, including a failure to adequately employ statistical considerations during study design, bias in sample selection or subject recruitment, errors in developing data inclusion/exclusion criteria, and flawed statistical analysis. To address some of these issues, several publishers have developed checklists that authors must complete. Others have either enhanced statistical expertise on existing editorial boards, or formed distinct statistics editorial boards. Although the U.S. Environmental Protection Agency, Office of Research and Development, already has a strong Quality Assurance Program, an initiative was undertaken to further strengthen statistics consideration and other factors in study design and also to ensure these same factors are evaluated during the review and approval of study protocols. To raise awareness of the importance of statistical issues and provide a forum for robust discussion, a Community of Practice for Statistics was formed in January 2014. In addition, three working groups were established to develop a series of questions or criteria that should be considered when designing or reviewing experimental, observational, or modeling focused research. This article describes the process used to develop these study design guidance documents, their contents, how they are being employed by the Agency's research enterprise, and expected benefits to Agency science. The process and guidance documents presented here may be of utility for any research enterprise interested in enhancing the reproducibility of its science. © The Author 2015. Published by Oxford University Press on behalf of the Society of Toxicology.

A Mission Concept to Study Multigenerational Mammalian Reproduction in Partial Gravity

NASA Technical Reports Server (NTRS)

Rodgers, Erica M.; Simon, Matthew A.; Chai, Patrick R.; Neilan, James H.; Stillwagen, Fred H.; Williams, Phillip A.; Lewis, Weston

2016-01-01

A team at NASA Langley Research Center conducted a study during which a conceptual space mission was designed. In this study, rodents are used as human analogs to gather biological and systems data in a relevant environment applicable to future settlements on Mars. The mission concept uniquely addresses the combined effects of long-durations (one-year or greater), autonomous and robotic operations, and biological responses to partial gravity with an emphasis on reproduction. The objectives of this study were to 1) understand challenges associated with designing an artificial gravity habitat that supports the reproduction and maturation of a large animal colony, 2) identify mission architectures and operational concepts to transport and maintain such a facility, and 3) identify fundamental science considerations for mammalian reproduction studies to inform vehicle design. A model demonstration unit was developed to visualize and test certain design concepts that resulted from these considerations. Three versions of this demonstration unit were built over the course of the study, each taking into account lessons learned from the previous version. This paper presents the updated baseline mission and spacecraft design concepts to achieve these objectives, with a specific emphasis on updates since publication in previous works. Analyses of the integrated system trades among the elements which make up the conceptual vehicle are described to address overall feasibility and identify potential integrated design opportunities. The latest iteration of the habitat robotics design and a conceptual design example for autonomous care of crew and systems are also presented. Finally, the conclusion of this conceptual design study, necessary future analyses to enable such a facility, and comments upon other applications of a similar exploration-focused research facilities are addressed.

A preliminary 6 DOF attitude and translation control system design for Starprobe

NASA Technical Reports Server (NTRS)

Mak, P.; Mettler, E.; Vijayarahgavan, A.

1981-01-01

The extreme thermal environment near perihelion and the high-accuracy gravitational science experiments impose unique design requirements on various subsystems of Starprobe. This paper examines some of these requirements and their impact on the preliminary design of a six-degree-of-freedom attitude and translational control system. Attention is given to design considerations, the baseline attitude/translational control system, system modeling, and simulation studies.

Design principles of water sensitive in settlement area on the river banks

NASA Astrophysics Data System (ADS)

Ryanti, E.; Hasriyanti, N.; Utami, W. D.

2018-03-01

This research will formulate the principle of designing settlement area of Kapuas River Pontianak with the approach of water sensitive concept of urban design (WSUD) the densely populated settlement area. By using a case study the approach that is a dense settlement area located on the banks of the river with literature study techniques to formulate the aspects considered and components that are set in the design, descriptive analysis with the rationalistic paradigm for identification characteristics of the settlement in the river banks areas with consideration of WSUD elements and formulate the principles of designing water-sensitive settlement areas. This research is important to do because the problems related to the water management system in the existing riverside settlement in Pontianak has not been maximal to do. So the primary of this research contains several objectives that will be achieved that is identifying the characteristics of riverside settlement area based on consideration of design aspects of the area that are sensitive to water and the principle of designing the area so that the existing problem structure will be formulated in relation to the community’s need for infrastructure in settlement environment and formulate and develop appropriate technology guidelines for integrated water management systems in riverside settlement areas and design techniques for water-sensitive settlements (WSUD).

LABORATORY DESIGN CONSIDERATIONS FOR SAFETY.

ERIC Educational Resources Information Center

National Safety Council, Chicago, IL. Campus Safety Association.

THIS SET OF CONSIDERATIONS HAS BEEN PREPARED TO PROVIDE PERSONS WORKING ON THE DESIGN OF NEW OR REMODELED LABORATORY FACILITIES WITH A SUITABLE REFERENCE GUIDE TO DESIGN SAFETY. THERE IS NO DISTINCTION BETWEEN TYPES OF LABORATORY AND THE EMPHASIS IS ON GIVING GUIDES AND ALTERNATIVES RATHER THAN DETAILED SPECIFICATIONS. AREAS COVERED INCLUDE--(1)…

Design considerations for space flight hardware

NASA Technical Reports Server (NTRS)

Glover, Daniel

1990-01-01

The environmental and design constraints are reviewed along with some insight into the established design and quality assurance practices that apply to low earth orbit (LEO) space flight hardware. It is intended as an introduction for people unfamiliar with space flight considerations. Some basic data and a bibliography are included.

Optimum Design of High Speed Prop-Rotors

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi

1992-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop optimization process. The procedures involve the consideration of blade aeroelastic, aerodynamic performance, structural and dynamic design requirements. Further, since the design involves consideration of several different objectives, multiobjective function formulation techniques are developed.

Generalized linear models and point count data: statistical considerations for the design and analysis of monitoring studies

Treesearch

Nathaniel E. Seavy; Suhel Quader; John D. Alexander; C. John Ralph

2005-01-01

The success of avian monitoring programs to effectively guide management decisions requires that studies be efficiently designed and data be properly analyzed. A complicating factor is that point count surveys often generate data with non-normal distributional properties. In this paper we review methods of dealing with deviations from normal assumptions, and we focus...

Conventional Gymnasium vs. Geodesic Field House. A Comparative Study of High School Physical Education and Assembly Facilities.

ERIC Educational Resources Information Center

Educational Facilities Labs., Inc., New York, NY.

A description is presented of the design features of a high school's geodesic dome field house. Following consideration of various design features and criteria for the physical education facility, a comprehensive analysis is given of comparative costs of a geodesic dome field house and conventional gymnasium. On the basis of the study it would…

Computer Assisted Educational Material Preparation for Fourth Grade Primary School Students' English Language Class in Teaching Numbers

ERIC Educational Resources Information Center

Yüzen, Abdulkadir; Karamete, Aysen

2016-01-01

In this study, using ADDIE instructional design model, it is aimed to prepare English language educational material for 4th grade primary students to teach them numbers. At the same time, ARCS model of motivation's attention, relevance and satisfaction phases are also taken into consideration. This study also comprises of Design Based Research…

Integrated source and channel encoded digital communication system design study

NASA Technical Reports Server (NTRS)

Huth, G. K.; Trumpis, B. D.; Udalov, S.

1975-01-01

Various aspects of space shuttle communication systems were studied. The following major areas were investigated: burst error correction for shuttle command channels; performance optimization and design considerations for Costas receivers with and without bandpass limiting; experimental techniques for measuring low level spectral components of microwave signals; and potential modulation and coding techniques for the Ku-band return link. Results are presented.

A Testlet Assembly Design for Adaptive Multistage Tests

ERIC Educational Resources Information Center

Luecht, Richard; Brumfield, Terry; Breithaupt, Krista

2006-01-01

This article describes multistage tests and some practical test development considerations related to the design and implementation of a multistage test, using the Uniform CPA (certified public accountant) Examination as a case study. The article further discusses the use of automated test assembly procedures in an operational context to produce…

Scheduling language and algorithm development study. Volume 1, phase 2: Design considerations for a scheduling and resource allocation system

NASA Technical Reports Server (NTRS)

Morrell, R. A.; Odoherty, R. J.; Ramsey, H. R.; Reynolds, C. C.; Willoughby, J. K.; Working, R. D.

1975-01-01

Data and analyses related to a variety of algorithms for solving typical large-scale scheduling and resource allocation problems are presented. The capabilities and deficiencies of various alternative problem solving strategies are discussed from the viewpoint of computer system design.

Soundstop. An Experimental Student Housing Study.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

The design development of a housing facility for deaf and blind students is reviewed in considerable detail. Initially traditional architectural solutions to the creation of dormitory space and accompanying circulation patterns are examined for their effect upon the lives of the inhabitants. The subsequent design progression which is presented is…

76 FR 63824 - Research Area Within Gray's Reef National Marine Sanctuary

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-14

... sanctuary). A research area is a region specifically designed for conducting controlled scientific studies... research area as this boundary was designed based solely on scientific research considerations. Although.... 070726412-1300-02] RIN 0648-AV88 Research Area Within Gray's Reef National Marine Sanctuary AGENCY: Office...

A GUIDE FOR PLANNING PHYSICAL EDUCATION AND ATHLETIC FACILITIES.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton.

THIS STUDY EXAMINES PHYSICAL EDUCATION FACILITIES, THEIR PHYSICAL NEEDS, AND RELATED DESIGN CONSIDERATIONS. A SYSTEM OF DETERMINING THE TOTAL NUMBER OF TEACHING STATIONS NEEDED IS GIVEN TO AID INITIAL REQUIREMENT ANALYSIS. INDOOR FACILITIES ANALYZED INCLUDE--(1) THE GYMNASIUM, IN TERMS OF LOCATION, SIZE, DESIGN FEATURES, AND RELATED COMPONENTS,…

JOSE, Jupiter orbiting spacecraft: A systems study, volume 1

NASA Technical Reports Server (NTRS)

1971-01-01

A brief summary of the mechanical properties of Jupiter is presented along with an organizational outline of the entire JOSE program. Other aspects of the program described include: spacecraft design, mission trajectories, altitude control, propulsion subsystem, on-board power supply, spacecraft structures and environmental design considerations, and telemetry.

Methodological considerations for designing a community water fluoridation cessation study.

PubMed

Singhal, Sonica; Farmer, Julie; McLaren, Lindsay

2017-06-01

High-quality, up-to-date research on community water fluoridation (CWF), and especially on the implications of CWF cessation for dental health, is limited. Although CWF cessation studies have been conducted, they are few in number; one of the major reasons is the methodological complexity of conducting such a study. This article draws on a systematic review of existing cessation studies (n=15) to explore methodological considerations of conducting CWF cessation studies in future. We review nine important methodological aspects (study design, comparison community, target population, time frame, sampling strategy, clinical indicators, assessment criteria, covariates and biomarkers) and provide recommendations for planning future CWF cessation studies that examine effects on dental caries. There is no one ideal study design to answer a research question. However, recommendations proposed regarding methodological aspects to conduct an epidemiological study to observe the effects of CWF cessation on dental caries, coupled with our identification of important methodological gaps, will be useful for researchers who are looking to optimize resources to conduct such a study with standards of rigour. © 2017 Her Majesty the Queen in Right of Canada. Community Dentistry and Oral Epidemiology © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Design considerations for an astronaut monorail system for large space structures and the structural characterization of its positioning arm

NASA Astrophysics Data System (ADS)

Watson, Judith J.

1992-08-01

An astronaut monorail system (AMS) is presented as a vehicle to transport and position EVA astronauts along large space truss structures. The AMS is proposed specifically as an alternative to the crew and equipment transfer aid for Space Station Freedom. Design considerations for the AMS were discussed and a reference configuration was selected for the study. Equations were developed to characterize the stiffness and frequency behavior of the AMS positioning arm. Experimental data showed that these equations gave a fairly accurate representation of the stiffness and frequency behavior of the arm. A study was presented to show trends for the arm behavior based on varying parameters of the stiffness and frequency equations. An ergonomics study was conducted to provide boundary conditions for tolerable frequency and deflection to be used in developing a design concept for the positioning arm. The feasibility of the AMS positioning arm was examined using equations and working curves developed in this study. It was found that a positioning arm of a length to reach all interior points of the space station truss structure could not be designed to satisfy frequency and deflection constraints. By relaxing the design requirements and the ergonomic boundaries, an arm could be designed which would provide a stable work platform for the EVA astronaut and give him access to over 75 percent of the truss interior.

Dual Fan Separator within the Universal Waste Management System

NASA Technical Reports Server (NTRS)

Stapleton, Tom; Converse, Dave; Broyan, James Lee, Jr.

2014-01-01

Since NASA's new spacecraft in development for both LEO and Deep Space capability have considerable crew volume reduction in comparison to the Space Shuttle, it is clear that NASA requires a smaller and less expensive commode. The UTAS Universal Waste Management System (UWMS) was designed to address these new constraints, resulting in an 80% volume reduction in the cabin while enhancing performance. Whereas all of the current space commodes use air flow to capture both urine and feces and separate air from the captured air/urine mixture, the UWMS commode and urine fans and the urine separator were combined into a single unit. This unit enables use of a single motor and motor controller, which provides considerable packaging and weight efficiency. In some of the intended platform applications for the UWMS, the urine is pumped to a water reclamation system. The ISS Urine Processor Assembly (UPA) system requires delivered urine to include less than 0.25% air inclusion. Air inclusion in centrifugal urine separators is greatly dependent on its rotational speed. To satisfy this requirement, a gear reducer was included, allowing the fans to rotate at a much higher speed than the separator. This new design, the Dual Fan Separator (DFS) has been designed, prototyped and tested. This paper will outline the studies and analysis performed to develop the design configuration for testing. The studies included a configuration trade study, dynamic stability analysis of the rotating bodies and a performance analysis of included labyrinth seals. NASA is considereing a program to fly the UWMS aboard the ISS as a flight experiment. The goal of the design activity is to elevate the Technical Readiness Level (TRL) of the Dual Fan Separator and determine if the concept is ready to be included in flight experiment deliverable.

Flow Distribution Control Characteristics in Marine Gas Turbine Waste- Heat Recovery Systems. Phase 2. Flow Distribution Control in Waste-Heat Steam Generators

DTIC Science & Technology

1982-07-01

waste-heat steam generators. The applicable steam generator design concepts and general design consideration were reviewed and critical problems...a once-through forced-circulation steam generator design should be selected because of stability, reliability, compact- ness and lightweight...consists of three sections and one appendix. In Section I, the applicable steam generator design conccpts and general design * considerations are reviewed

Spacesuit Radiation Shield Design Methods

NASA Technical Reports Server (NTRS)

Wilson, John W.; Anderson, Brooke M.; Cucinotta, Francis A.; Ware, J.; Zeitlin, Cary J.

2006-01-01

Meeting radiation protection requirements during EVA is predominantly an operational issue with some potential considerations for temporary shelter. The issue of spacesuit shielding is mainly guided by the potential of accidental exposure when operational and temporary shelter considerations fail to maintain exposures within operational limits. In this case, very high exposure levels are possible which could result in observable health effects and even be life threatening. Under these assumptions, potential spacesuit radiation exposures have been studied using known historical solar particle events to gain insight on the usefulness of modification of spacesuit design in which the control of skin exposure is a critical design issue and reduction of blood forming organ exposure is desirable. Transition to a new spacesuit design including soft upper-torso and reconfigured life support hardware gives an opportunity to optimize the next generation spacesuit for reduced potential health effects during an accidental exposure.

Ethical considerations of neuro-oncology trial design in the era of precision medicine.

PubMed

Gupta, Saksham; Smith, Timothy R; Broekman, Marike L

2017-08-01

The field of oncology is currently undergoing a paradigm shift. Advances in the understanding of tumor biology and in tumor sequencing technology have contributed to the shift towards precision medicine, the therapeutic framework of targeting the individual oncogenic changes each tumor harbors. The success of precision medicine therapies, such as targeted kinase inhibitors and immunotherapies, in other cancers have motivated studies in brain cancers. The high specificity and cost of these therapies also encourage a shift in clinical trial design away from randomized control trials towards smaller, more exclusive early phase clinical trials. While these new trials advance the clinical application of increasingly precise and individualized therapies, their design brings ethical challenges . We review the pertinent ethical considerations for clinical trials of precision medicine in neuro-oncology and discuss methods to protect patients in this new era of trial design.

Mars Relays Satellite Orbit Design Considerations for Global Support of Robotic Surface Missions

NASA Technical Reports Server (NTRS)

Hastrup, Rolf; Cesarone, Robert; Cook, Richard; Knocke, Phillip; McOmber, Robert

1993-01-01

This paper discusses orbit design considerations for Mars relay satellite (MRS)support of globally distributed robotic surface missions. The orbit results reported in this paper are derived from studies of MRS support for two types of Mars robotic surface missions: 1) the mars Environmental Survey (MESUR) mission, which in its current definition would deploy a global network of up to 16 small landers, and 2)a Small Mars Sample Return (SMSR) mission, which included four globally distributed landers, each with a return stage and one or two rovers, and up to four additional sets of lander/rover elements in an extended mission phase.

A study of human performance in a rotating environment

NASA Technical Reports Server (NTRS)

Green, J. A.; Peacock, J. L.; Holm, A. P.

1971-01-01

Consideration is given to the lack of sufficient data relative to the response of man to the attendant oculovestibular stimulations induced by multi-directional movement of an individual within the rotating environment to provide the required design criteria. This was done to determine the overall impact of artificial gravity simulations on potential design configurations and crew operational procedures. Gross locomotion and fine motor performance were evaluated. Results indicate that crew orientation, rotational rates, vehicle design configurations, and operational procedures may be used to reduce the severity of the adverse effects of the Coriolis and cross-coupled angular accelerations acting on masses moving within a rotating environment. Results further indicate that crew selection, motivation, and short-term exposures to the rotating environment may be important considerations for future crew indoctrination and training programs.

High Voltage Design Considerations for the Electrostatic Septum for the Mu2e Beam Resonant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alvarez, Matthew L.; Jensen, C.; Morris, D.

aTwo electrostatic septa (ESS) are being designed for the slow extraction of 8GeV proton beam for the Mu2e experiment at Fermilab. Special attention is given to the high voltage components that affect the performance of the septa. The components under consideration are the high voltage (HV) feedthrough, cathode standoff (CS), and clearing electrode ceramic standoffs (CECS). Previous experience with similar HV systems at Fermilab was used to define the evaluation criteria of the design of the high voltage components. Using electric field simulation software, high E-field intensities on the components and integrated field strength along the surface of the dielectricmore » material were minimized. Here we discuss the limitations found and improvements made based on those studies.« less

Historical trend in the research and development of aircraft

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1981-01-01

Results are presented from a study of aircraft design trends undertaken to determine the relationship between research, development, test and evaluation and aircraft mission capability, requirements and objectives. It is shown that while in some cases a performance objective was the primary research driver, research was the driver in the formulation of objectives in others. Among the topics discussed are: (1) speed considerations such as compressibility, propulsion and test techniques; (2) airframe considerations such as swept, delta, trapezoidal and variable-sweep planforms and mission commonality; (3) research aircraft; (4) the recent impact of computer-aided design; (5) Soviet aircraft development approaches and (6) a comparison of Soviet and U.S. military aircraft design trends. Attention is given to experimental and prototype aircraft programs which, although cancelled, anticipated significant subsequent developments.

Metabolism of designer drugs of abuse.

PubMed

Staack, Roland F; Maurer, Hans H

2005-06-01

Abuse of designer drugs is widespread among young people, especially in the so-called "dance club scene" or "rave scene", worldwide. Severe and even fatal poisonings have been attributed to the consumption of such drugs of abuse. However, in contrast to new medicaments, which are extensively studied in controlled clinical studies concerning metabolism, including cytochrome P450 isoenzyme differentiation, and further pharmacokinetics, designer drugs are consumed without any safety testing. This paper reviews the metabolism of new designer drugs of abuse that have emerged on the black market during the last years. Para-methoxyamphetamine (PMA), para-methoxymethamphetamine (PMMA) and 4-methylthioamphetamine (4-MTA), were taken into consideration as new "classical" amphetamine-derived designer drugs. Furthermore, N-benzylpiperazine (BZP), 1-(3, 4-methylenedioxybenzyl)piperazine (MDBP), 1-(3-trifluoromethylphenyl)piperazine (TFMPP), 1-(3-chlorophenyl)piperazine (mCPP) and 1-(4-methoxyphenyl)piperazine (MeOPP) were taken into consideration as derivatives of the class of piperazine-derived designer drugs, as well as alpha-pyr-rolidinopropiophenone (PPP), 4'-methoxy-alpha-pyrrolidinopropiophenone (MOPPP), 3', 4'-methylenedioxy-alpha-pyrrolidino-propiophenone (MDPPP), 4'-methyl-alpha-pyrrolidinopropiophenone (MPPP), and 4'-methyl-alpha-pyrrolidinoexanophenone (MPHP) as derivatives of the class of alpha-pyrrolidinophenone-derived designer drugs. Papers describing identification of in vivo or in vitro human or animal metabolites and cytochrome P450 isoenzyme dependent metabolism have been considered and summarized.

The devil that we know: lead (Pb) replacement policies under conditions of scientific uncertainty

NASA Technical Reports Server (NTRS)

Ogunseitan, Dele; Schoenung, Julie; Saphores, Jean-Daniel; Shapiro, Andrew; Bhuie, Amrit; Kang, Hai-Yong; Nixon, Hilary; Stein, Antionette

2003-01-01

Engineering and economic considerations are typical driving forces behind the selection of specific chemicals used in the manufacture of consumer products. Only recently has post-consumer environmental impact become part of the major considerations during the initial phases of product design. Therefore, reactive, rather than proactive strategies have dominated the consideration of environmental and health issues in product design.

Human respiratory considerations for civil transport aircraft oxygen system.

DOT National Transportation Integrated Search

1978-01-01

This report is intended to acquaint personnel involved in the design, inspection, and maintenance of civil transport oxygen systems with the human respiratory requirements and oxygen system design considerations necessary to effect an interface and p...

Report of the Working Design Group

NASA Technical Reports Server (NTRS)

1992-01-01

The engineering study group in the LOUISA workshop was responsible for producing a preliminary general design for an optical synthetic aperture telescope on the Moon. This design is intended to be a test case for focusing continuing design studies. The scope of the design included consideration of the array geometry, individual telescopes, metrology, site attributes, and construction. However, no attempt was made to go into further depth in the design than to cover the essential characteristics of the instrument. The starting point for the array design was the lunar optical array discussed by Burke (1985). His array geometry followed the design and correlation procedure of the 27-element Very Large Array (VLA) radio telescopes near Socorro, New Mexico.

Review of methods for measuring β-cell function: Design considerations from the Restoring Insulin Secretion (RISE) Consortium.

PubMed

Hannon, Tamara S; Kahn, Steven E; Utzschneider, Kristina M; Buchanan, Thomas A; Nadeau, Kristen J; Zeitler, Philip S; Ehrmann, David A; Arslanian, Silva A; Caprio, Sonia; Edelstein, Sharon L; Savage, Peter J; Mather, Kieren J

2018-01-01

The Restoring Insulin Secretion (RISE) study was initiated to evaluate interventions to slow or reverse the progression of β-cell failure in type 2 diabetes (T2D). To design the RISE study, we undertook an evaluation of methods for measurement of β-cell function and changes in β-cell function in response to interventions. In the present paper, we review approaches for measurement of β-cell function, focusing on methodologic and feasibility considerations. Methodologic considerations included: (1) the utility of each technique for evaluating key aspects of β-cell function (first- and second-phase insulin secretion, maximum insulin secretion, glucose sensitivity, incretin effects) and (2) tactics for incorporating a measurement of insulin sensitivity in order to adjust insulin secretion measures for insulin sensitivity appropriately. Of particular concern were the capacity to measure β-cell function accurately in those with poor function, as is seen in established T2D, and the capacity of each method for demonstrating treatment-induced changes in β-cell function. Feasibility considerations included: staff burden, including time and required methodological expertise; participant burden, including time and number of study visits; and ease of standardizing methods across a multicentre consortium. After this evaluation, we selected a 2-day measurement procedure, combining a 3-hour 75-g oral glucose tolerance test and a 2-stage hyperglycaemic clamp procedure, augmented with arginine. © 2017 John Wiley & Sons Ltd.

A study of response time of pitot pressure probes designed for rapid response and protection of transducer

NASA Technical Reports Server (NTRS)

Moore, J. A.

1979-01-01

An eight orifice probe, designed to protect the transducer without the use of a baffle, was compared to a standard orifice-baffle probe in the small shock tube and in the expansion tube under normal run conditions. In both facilities, the response time of eight orifice probe was considerable better than the standard probe design.

Benefits of Operational Consideration into the Guidance, Navigation, and Control Design of Spacecraft

NASA Technical Reports Server (NTRS)

Morris, Mark C.; Holt, Greg N.

2011-01-01

The following paper points out historical examples where operational consideration into the GN&C design could have helped avoid operational complexity, reduce costs, ensure the ability for a GN&C system to be able to adapt to failures, and in some cases might have helped save mission objectives. A costly repeat of mistakes could befall a program if previous operational lessons, especially from operators of vehicles with similar GN&C systems, are not considered during the GN&C design phase of spacecraft. The information gained from operational consideration during the design can lead to improvements of the design, allow less ground support during operations, and prevent repetition of previous mistakes. However, this benefit can only occur if spacecraft operators adequately capture lessons learned that would improve future designs for operations and those who are designing spacecraft incorporate inputs from those that have previously operated similar GN&C systems.

Point-to-point sub-orbital space tourism: Some initial considerations

NASA Astrophysics Data System (ADS)

Webber, Derek

2010-06-01

Several public statements have been made about the possible, or even likely, extension of initial sub-orbital space tourism operations to encompass point-to-point travel. It is the purpose of this paper to explore some of the basic considerations for such a plan, in order to understand both its merits and its problems. The paper will discuss a range of perspectives, from basic physics to market segmentation, from ground segment logistics to spacecraft design considerations. It is important that these initial considerations are grasped before more detailed planning and design takes place.

Applications of Human Factors in Space

NASA Technical Reports Server (NTRS)

Rajulu, Sudhakar; Margerum, Sarah

2008-01-01

The main question for human factors practitioners is to determine if the user population can be accommodated within a design. Given the wide range of variables feeding into a design, just one of which is human factors, oftentimes designers will have restrictions that may potentially impact the level of accommodation. This paper focuses on two case studies where there have been impacts at the design level that may be detrimental to the ability of the design to meet certain criteria. The studies use novel approaches to determine what, if any, changes in population accommodation levels have occurred and what factors are important when manipulating the design in the future. The results of these studies provide a backbone for future analyses when working with design considerations.

Design of siRNA Therapeutics from the Molecular Scale

PubMed Central

Angart, Phillip; Vocelle, Daniel; Chan, Christina; Walton, S. Patrick

2013-01-01

While protein-based therapeutics is well-established in the market, development of nucleic acid therapeutics has lagged. Short interfering RNAs (siRNAs) represent an exciting new direction for the pharmaceutical industry. These small, chemically synthesized RNAs can knock down the expression of target genes through the use of a native eukaryotic pathway called RNA interference (RNAi). Though siRNAs are routinely used in research studies of eukaryotic biological processes, transitioning the technology to the clinic has proven challenging. Early efforts to design an siRNA therapeutic have demonstrated the difficulties in generating a highly-active siRNA with good specificity and a delivery vehicle that can protect the siRNA as it is transported to a specific tissue. In this review article, we discuss design considerations for siRNA therapeutics, identifying criteria for choosing therapeutic targets, producing highly-active siRNA sequences, and designing an optimized delivery vehicle. Taken together, these design considerations provide logical guidelines for generating novel siRNA therapeutics. PMID:23976875

Research Methods in Healthcare Epidemiology and Antimicrobial Stewardship-Observational Studies.

PubMed

Snyder, Graham M; Young, Heather; Varman, Meera; Milstone, Aaron M; Harris, Anthony D; Munoz-Price, Silvia

2016-10-01

Observational studies compare outcomes among subjects with and without an exposure of interest, without intervention from study investigators. Observational studies can be designed as a prospective or retrospective cohort study or as a case-control study. In healthcare epidemiology, these observational studies often take advantage of existing healthcare databases, making them more cost-effective than clinical trials and allowing analyses of rare outcomes. This paper addresses the importance of selecting a well-defined study population, highlights key considerations for study design, and offers potential solutions including biostatistical tools that are applicable to observational study designs. Infect Control Hosp Epidemiol 2016;1-6.

System dynamics and simulation of LSS

NASA Technical Reports Server (NTRS)

Ryan, R. F.

1978-01-01

Large Space Structures have many unique problems arising from mission objectives and the resulting configuration. Inherent in these configurations is a strong coupling among several of the designing disciplines. In particular, the coupling between structural dynamics and control is a key design consideration. The solution to these interactive problems requires efficient and accurate analysis, simulation and test techniques, and properly planned and conducted design trade studies. The discussion presented deals with these subjects and concludes with a brief look at some NASA capabilities which can support these technology studies.

Advanced extravehicular activity systems requirements definition study. Phase 2: Extravehicular activity at a lunar base

NASA Technical Reports Server (NTRS)

Neal, Valerie; Shields, Nicholas, Jr.; Carr, Gerald P.; Pogue, William; Schmitt, Harrison H.; Schulze, Arthur E.

1988-01-01

The focus is on Extravehicular Activity (EVA) systems requirements definition for an advanced space mission: remote-from-main base EVA on the Moon. The lunar environment, biomedical considerations, appropriate hardware design criteria, hardware and interface requirements, and key technical issues for advanced lunar EVA were examined. Six remote EVA scenarios (three nominal operations and three contingency situations) were developed in considerable detail.

Data Resilience in the dCache Storage System

DOE PAGES

Rossi, A. L.; Adeyemi, F.; Ashish, A.; ...

2017-11-23

In this study we discuss design, implementation considerations, and performance of a new Resilience Service in the dCache storage system responsible for file availability and durability functionality.

Creating Library Interiors: Planning and Design Considerations.

ERIC Educational Resources Information Center

Jones, Plummer Alston, Jr.; Barton, Phillip K.

1997-01-01

Examines design considerations for public library interiors: access; acoustical treatment; assignable and nonassignable space; building interiors: ceilings, clocks, color, control, drinking fountains; exhibit space: slotwall display, floor coverings, floor loading, furniture, lighting, mechanical systems, public address, copying machines,…

Optimization of helicopter airframe structures for vibration reduction considerations, formulations and applications

NASA Technical Reports Server (NTRS)

Murthy, T. Sreekanta

1988-01-01

Several key issues involved in the application of formal optimization technique to helicopter airframe structures for vibration reduction are addressed. Considerations which are important in the optimization of real airframe structures are discussed. Considerations necessary to establish relevant set of design variables, constraints and objectives which are appropriate to conceptual, preliminary, detailed design, ground and flight test phases of airframe design are discussed. A methodology is suggested for optimization of airframes in various phases of design. Optimization formulations that are unique to helicopter airframes are described and expressions for vibration related functions are derived. Using a recently developed computer code, the optimization of a Bell AH-1G helicopter airframe is demonstrated.

Undertaking Experiments in Social Sciences: Sequential, Multiple Time Series Designs for Consideration

ERIC Educational Resources Information Center

Phan, Huy P.; Ngu, Bing H.

2017-01-01

In social sciences, the use of stringent methodological approaches is gaining increasing emphasis. Researchers have recognized the limitations of cross-sectional, non-manipulative data in the study of causality. True experimental designs, in contrast, are preferred as they represent rigorous standards for achieving causal flows between variables.…

What Is the Function of a Figurine? Can the Repertory Grid Technique Tell?

ERIC Educational Resources Information Center

Persson, Helena Isakssson

2016-01-01

Teaching design and product development at upper secondary school level in Sweden is a matter of interdisciplinary considerations. Education in product development, at this level, prepares students for further studies and career in engineering or industrial design. Knowledge of artefacts is an important element in the education. In coherence with…

Experimental study of turbulence in blade end wall corner region

NASA Technical Reports Server (NTRS)

Raj, R.

1982-01-01

Corner flows and wall pressure fluctuations, design and fabrication of the test model, preliminary resuls on boundary layer, flow visualization, turbulence intensity and spectra measurements are presented. The design consideration and fabrication report on the newly built wind tunnel to be used for subsequent continuation of the research effort is also presented.

PLANNING STUDY--BEHAVIORAL FACTORS IN DENTAL SCHOOL DESIGN. SUMMARY PROGRESS REPORT.

ERIC Educational Resources Information Center

MYRICK, RICHARD

THIS REPORT DISCUSSES ENVIRONMENTAL CONSIDERATIONS IN THE DESIGN OF DENTAL SCHOOL FACILITIES AS RELATED TO THE EDUCATIONAL NEEDS OF STUDENTS AND FACULTY. TWO TYPES OF NEEDS ARE IDENTIFIED--(1) PHYSICAL, INCLUDING A FUNCTIONAL ANALYSIS OF THE PHYSICAL NEEDS IMPOSED BY THE TASKS TO BE DONE, AND (2) PSYCHOLOGICAL, INCLUDING MOTIVATIONAL, SOCIAL, AND…

A suggested approach for design of oak (Quercus L.) regeneration research considering regional differences

Treesearch

Daniel C. Dey; Martin A. Spetich; Dale R. Wiegel; David L. Graney; John M. Kabrick

2009-01-01

Research on oak (Quercus L.) regeneration has generally consisted of smallscale studies of treatments designed to favor oak, including consideration of site quality and topographic effects on oak regeneration. However, these experiments have not consistently factored in broader-scale ecological differences found in the eastern United States. Oak...

An Approach to Participatory Instructional Design in Secondary Education: An Exploratory Study

ERIC Educational Resources Information Center

Konings, Karen D.; Brand-Gruwel, Saskia; van Merrienboer, Jeroen J. G.

2010-01-01

Background: Teachers have limited insight in students' perspectives on education, although these perspectives influence quality of learning. As students' and teachers' perspectives differ considerably, there is a need for teachers to learn more about students' experiences and ideas about education. Participatory design might be a good strategy for…

Space bioreactor: Design/process flow

NASA Technical Reports Server (NTRS)

Cross, John H.

1987-01-01

The design of the space bioreactor stems from three considerations. First, and foremost, it must sustain cells in microgravity. Closely related is the ability to take advantage of the weightlessness and microgravity. Lastly, it should fit into a bioprocess. The design of the space bioreactor is described in view of these considerations. A flow chart of the bioreactor is presented and discussed.

A framework for sustainable nanomaterial selection and design based on performance, hazard, and economic considerations.

PubMed

Falinski, Mark M; Plata, Desiree L; Chopra, Shauhrat S; Theis, Thomas L; Gilbertson, Leanne M; Zimmerman, Julie B

2018-04-30

Engineered nanomaterials (ENMs) and ENM-enabled products have emerged as potentially high-performance replacements to conventional materials and chemicals. As such, there is an urgent need to incorporate environmental and human health objectives into ENM selection and design processes. Here, an adapted framework based on the Ashby material selection strategy is presented as an enhanced selection and design process, which includes functional performance as well as environmental and human health considerations. The utility of this framework is demonstrated through two case studies, the design and selection of antimicrobial substances and conductive polymers, including ENMs, ENM-enabled products and their alternatives. Further, these case studies consider both the comparative efficacy and impacts at two scales: (i) a broad scale, where chemical/material classes are readily compared for primary decision-making, and (ii) within a chemical/material class, where physicochemical properties are manipulated to tailor the desired performance and environmental impact profile. Development and implementation of this framework can inform decision-making for the implementation of ENMs to facilitate promising applications and prevent unintended consequences.

Comparing Dynamic Treatment Regimes Using Repeated-Measures Outcomes: Modeling Considerations in SMART Studies

PubMed Central

Lu, Xi; Nahum-Shani, Inbal; Kasari, Connie; Lynch, Kevin G.; Oslin, David W.; Pelham, William E.; Fabiano, Gregory; Almirall, Daniel

2016-01-01

A dynamic treatment regime (DTR) is a sequence of decision rules, each of which recommends a treatment based on a patient’s past and current health status. Sequential, multiple assignment, randomized trials (SMARTs) are multi-stage trial designs that yield data specifically for building effective DTRs. Modeling the marginal mean trajectories of a repeated-measures outcome arising from a SMART presents challenges, because traditional longitudinal models used for randomized clinical trials do not take into account the unique design features of SMART. We discuss modeling considerations for various forms of SMART designs, emphasizing the importance of considering the timing of repeated measures in relation to the treatment stages in a SMART. For illustration, we use data from three SMART case studies with increasing level of complexity, in autism, child attention deficit hyperactivity disorder (ADHD), and adult alcoholism. In all three SMARTs we illustrate how to accommodate the design features along with the timing of the repeated measures when comparing DTRs based on mean trajectories of the repeated-measures outcome. PMID:26638988

Comparing dynamic treatment regimes using repeated-measures outcomes: modeling considerations in SMART studies.

PubMed

Lu, Xi; Nahum-Shani, Inbal; Kasari, Connie; Lynch, Kevin G; Oslin, David W; Pelham, William E; Fabiano, Gregory; Almirall, Daniel

2016-05-10

A dynamic treatment regime (DTR) is a sequence of decision rules, each of which recommends a treatment based on a patient's past and current health status. Sequential, multiple assignment, randomized trials (SMARTs) are multi-stage trial designs that yield data specifically for building effective DTRs. Modeling the marginal mean trajectories of a repeated-measures outcome arising from a SMART presents challenges, because traditional longitudinal models used for randomized clinical trials do not take into account the unique design features of SMART. We discuss modeling considerations for various forms of SMART designs, emphasizing the importance of considering the timing of repeated measures in relation to the treatment stages in a SMART. For illustration, we use data from three SMART case studies with increasing level of complexity, in autism, child attention deficit hyperactivity disorder, and adult alcoholism. In all three SMARTs, we illustrate how to accommodate the design features along with the timing of the repeated measures when comparing DTRs based on mean trajectories of the repeated-measures outcome. Copyright © 2015 John Wiley & Sons, Ltd.

STUDY DESIGN CONSIDERATIONS FOR THE EXPOSURE COMPONENT OF THE NATIONAL CHILDREN'S STUDY

EPA Science Inventory

An ideal strategy for the exposure monitoring component of the planned National Children's Study (NCS) is to measure indoor and outdoor concentrations and personal exposures of children to a variety of pollutants, including ambient particulate and gaseous pollutants, biologicals,...

A SURVEY OF LABORATORY AND STATISTICAL ISSUES RELATED TO FARMWORKER EXPOSURE STUDIES

EPA Science Inventory

Developing internally valid, and perhaps generalizable, farmworker exposure studies is a complex process that involves many statistical and laboratory considerations. Statistics are an integral component of each study beginning with the design stage and continuing to the final da...

Designing for Dissemination: Lessons in Message Design From “1-2-3 Pap”

PubMed Central

Cohen, Elisia L.; Head, Katharine J.; McGladrey, Margaret J.; Hoover, Anna G.; Vanderpool, Robin C.; Bridger, Colleen; Carman, Angela; Crosby, Richard A.; Darling, Elaine; Tucker-McLaughlin, Mary; Winterbauer, Nancy

2016-01-01

Despite a large number of evidence-based health communication interventions tested in private, public, and community health settings, there is a dearth of research on successful secondary dissemination of these interventions to other audiences. This article presents the case study of “1-2-3 Pap,” a health communication intervention to improve human papillomavirus (HPV) vaccination uptake and Pap testing outcomes in Eastern Kentucky, and explores strategies used to disseminate this intervention to other populations in Kentucky, North Carolina, and West Virginia. Through this dissemination project, we identified several health communication intervention design considerations that facilitated our successful dissemination to these other audiences; these intervention design considerations include (a) developing strategies for reaching other potential audiences, (b) identifying intervention message adaptations that might be needed, and (c) determining the most appropriate means or channels by which to reach these potential future audiences. Using “1-2-3 Pap” as an illustrative case study, we describe how careful planning and partnership development early in the intervention development process can improve the potential success of enhancing the reach and effectiveness of an intervention to other audiences beyond the audience for whom the intervention messages were originally designed. PMID:25470444

Design Development Analyses in Support of a Heatpipe-Brayton Cycle Heat Exchanger

NASA Technical Reports Server (NTRS)

Steeve, Brian E.; Kapernick, Richard J.

2004-01-01

One of the power systems under consideration for nuclear electric propulsion or as a planetary surface power source is a heatpipe-cooled reactor coupled to a Brayton cycle. In this system, power is transferred from the heatpipes to the Brayton gas via a heat exchanger attached to the heatpipes. This paper discusses the fluid, thermal and structural analyses that were performed in support of the design of the heat exchanger to be tested in the SAFE-100 experimental program at the Marshall Space Flight Center: An important consideration throughout the design development of the heat exchanger w its capability to be utilized for higher power and temperature applications. This paper also discusses this aspect of the design and presents designs for specific applications that are under consideration.

Optical design and performance of F-Theta lenses for high-power and high-precision applications

NASA Astrophysics Data System (ADS)

Yurevich, V. I.; Grimm, V. A.; Afonyushkin, A. A.; Yudin, K. V.; Gorny, S. G.

2015-09-01

F-Theta lenses are widely used in remote laser processing. Nowadays, a large variety of scanning systems utilizing these devices are commercially available. In this paper, we demonstrate that all practical issues lose their triviality in designing high-performance F-Theta scanning systems. Laser power scaling requires attention to thermally-induced phenomena and ghost reflections. This requirement considerably complicates optimization of the optical configuration of the system and primary aberration correction, even during preliminary design. Obtaining high positioning accuracy requires taking into consideration all probable reasons for processing field distortion. We briefly describe the key engineering relationships and invariants as well as the typical design of a scanner lens and the main field-flattening techniques. Specific emphasis is directed to consideration of the fundamental nonlinearity of two-mirror scanners. To the best of our knowledge, this issue has not been yet studied. We also demonstrate the benefits of our F-Theta lens optimization technique, which uses a plurality of entrance pupils. The problems of eliminating focused ghost reflections and the effects of thermally-induced processes in high-power F-Theta lenses are considered. A set of multi-path 3D processing and laser cutting experiments were conducted and are presented herein to demonstrate the impact of laser beam degradation on the process performance. A selection of our non-standard optical designs is presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, Weiren

This paper discusses the cost consideration and a possible construction timeline of the CEPC-SPPC study based on a preliminary conceptual design that is being carried out at the Institute of High Energy Physics (IHEP) in China.

Determining Recommendations for Improvement of Communication Skills Training in Dental Education: A Scoping Review.

PubMed

Ayn, Caitlyn; Robinson, Lynne; Nason, April; Lovas, John

2017-04-01

Professional communication skills have a significant impact on dental patient satisfaction and health outcomes. Communication skills training has been shown to improve the communication skills of dental students. Therefore, strengthening communication skills training in dental education shows promise for improving dental patient satisfaction and outcomes. The aim of this study was to facilitate the development of dental communication skills training through a scoping review with compilation of a list of considerations, design of an example curriculum, and consideration of barriers and facilitators to adoption of such training. A search to identify studies of communication skills training interventions and programs was conducted. Search queries were run in three databases using both text strings and controlled terms (MeSH), yielding 1,833 unique articles. Of these, 35 were full-text reviewed, and 17 were included in the final synthesis. Considerations presented in the articles were compiled into 15 considerations. These considerations were grouped into four themes: the value of communication skills training, the role of instructors, the importance of accounting for diversity, and the structure of communication skills training. An example curriculum reflective of these considerations is presented, and consideration of potential barriers and facilitators to implementation are discussed. Application and evaluation of these considerations are recommended in order to support and inform future communication skills training development.

Comparative effectiveness of colony-stimulating factors in febrile neutropenia prophylaxis: how results are affected by research design.

PubMed

Henk, Henry J; Li, Xiaoyan; Becker, Laura K; Xu, Hairong; Gong, Qi; Deeter, Robert G; Barron, Richard L

2015-01-01

To examine the impact of research design on results in two published comparative effectiveness studies. Guidelines for comparative effectiveness research have recommended incorporating disease process in study design. Based on the recommendations, we develop a checklist of considerations and apply the checklist in review of two published studies on comparative effectiveness of colony-stimulating factors. Both studies used similar administrative claims data, but different methods, which resulted in directionally different estimates. Major design differences between the two studies include: whether the timing of intervention in disease process was identified and whether study cohort and outcome assessment period were defined based on this temporal relationship. Disease process and timing of intervention should be incorporated into the design of comparative effectiveness studies.

Design and Management of an IMC Micro Center.

ERIC Educational Resources Information Center

Bunson, Stanley N.

1988-01-01

Outlines design and management factors to be considered when developing a microcomputer lab for an instructional media center (IMC). Highlights include environmental considerations, including spatial arrangements, furniture, power requirements, temperature control, and lighting; software and hardware acquisition; and administrative considerations,…

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

This paper describes ergonomics and the need to adapt worksites and technologies for individuals with physical or sensory disabilities. It provides suggestions for how to design an appropriate setup, design considerations, environmental considerations, chairs, monitor height, ambient noise, light, and electricity. Recommendations include: (1)…

Technical and conceptual considerations for using animated stimuli in studies of animal behavior.

PubMed

Chouinard-Thuly, Laura; Gierszewski, Stefanie; Rosenthal, Gil G; Reader, Simon M; Rieucau, Guillaume; Woo, Kevin L; Gerlai, Robert; Tedore, Cynthia; Ingley, Spencer J; Stowers, John R; Frommen, Joachim G; Dolins, Francine L; Witte, Klaudia

2017-02-01

Rapid technical advances in the field of computer animation (CA) and virtual reality (VR) have opened new avenues in animal behavior research. Animated stimuli are powerful tools as they offer standardization, repeatability, and complete control over the stimulus presented, thereby "reducing" and "replacing" the animals used, and "refining" the experimental design in line with the 3Rs. However, appropriate use of these technologies raises conceptual and technical questions. In this review, we offer guidelines for common technical and conceptual considerations related to the use of animated stimuli in animal behavior research. Following the steps required to create an animated stimulus, we discuss (I) the creation, (II) the presentation, and (III) the validation of CAs and VRs. Although our review is geared toward computer-graphically designed stimuli, considerations on presentation and validation also apply to video playbacks. CA and VR allow both new behavioral questions to be addressed and existing questions to be addressed in new ways, thus we expect a rich future for these methods in both ultimate and proximate studies of animal behavior.

Technical and conceptual considerations for using animated stimuli in studies of animal behavior

PubMed Central

Rosenthal, Gil G.; Reader, Simon M.; Rieucau, Guillaume; Woo, Kevin L.; Gerlai, Robert; Tedore, Cynthia; Ingley, Spencer J.; Stowers, John R.; Frommen, Joachim G.; Dolins, Francine L.; Witte, Klaudia

2017-01-01

Abstract Rapid technical advances in the field of computer animation (CA) and virtual reality (VR) have opened new avenues in animal behavior research. Animated stimuli are powerful tools as they offer standardization, repeatability, and complete control over the stimulus presented, thereby “reducing” and “replacing” the animals used, and “refining” the experimental design in line with the 3Rs. However, appropriate use of these technologies raises conceptual and technical questions. In this review, we offer guidelines for common technical and conceptual considerations related to the use of animated stimuli in animal behavior research. Following the steps required to create an animated stimulus, we discuss (I) the creation, (II) the presentation, and (III) the validation of CAs and VRs. Although our review is geared toward computer-graphically designed stimuli, considerations on presentation and validation also apply to video playbacks. CA and VR allow both new behavioral questions to be addressed and existing questions to be addressed in new ways, thus we expect a rich future for these methods in both ultimate and proximate studies of animal behavior. PMID:29491958

Residential design for real life rehabilitation.

PubMed

Kiser, Laura; Zasler, Nathan

2009-01-01

This article provides readers with a review of the major considerations for designing living environments for persons with neurodisability due to acquired brain injury (ABI). Components that need to be considered in order to assure that the environment is designed with a functional perspective in mind are explored. The issues to be considered herein include the influences of cognition and visual and visuoperceptual, motor, behavioral, and sensory impairment on residential design considerations. Resources for individuals involved in residential design for this special population are also provided to facilitate design decisions and implementation.

Planning Considerations for a Mars Sample Receiving Facility: Summary and Interpretation of Three Design Studies

NASA Astrophysics Data System (ADS)

Beaty, David W.; Allen, Carlton C.; Bass, Deborah S.; Buxbaum, Karen L.; Campbell, James K.; Lindstrom, David J.; Miller, Sylvia L.; Papanastassiou, Dimitri A.

2009-10-01

It has been widely understood for many years that an essential component of a Mars Sample Return mission is a Sample Receiving Facility (SRF). The purpose of such a facility would be to take delivery of the flight hardware that lands on Earth, open the spacecraft and extract the sample container and samples, and conduct an agreed-upon test protocol, while ensuring strict containment and contamination control of the samples while in the SRF. Any samples that are found to be non-hazardous (or are rendered non-hazardous by sterilization) would then be transferred to long-term curation. Although the general concept of an SRF is relatively straightforward, there has been considerable discussion about implementation planning. The Mars Exploration Program carried out an analysis of the attributes of an SRF to establish its scope, including minimum size and functionality, budgetary requirements (capital cost, operating costs, cost profile), and development schedule. The approach was to arrange for three independent design studies, each led by an architectural design firm, and compare the results. While there were many design elements in common identified by each study team, there were significant differences in the way human operators were to interact with the systems. In aggregate, the design studies provided insight into the attributes of a future SRF and the complex factors to consider for future programmatic planning.

Planning considerations for a Mars Sample Receiving Facility: summary and interpretation of three design studies.

PubMed

Beaty, David W; Allen, Carlton C; Bass, Deborah S; Buxbaum, Karen L; Campbell, James K; Lindstrom, David J; Miller, Sylvia L; Papanastassiou, Dimitri A

2009-10-01

It has been widely understood for many years that an essential component of a Mars Sample Return mission is a Sample Receiving Facility (SRF). The purpose of such a facility would be to take delivery of the flight hardware that lands on Earth, open the spacecraft and extract the sample container and samples, and conduct an agreed-upon test protocol, while ensuring strict containment and contamination control of the samples while in the SRF. Any samples that are found to be non-hazardous (or are rendered non-hazardous by sterilization) would then be transferred to long-term curation. Although the general concept of an SRF is relatively straightforward, there has been considerable discussion about implementation planning. The Mars Exploration Program carried out an analysis of the attributes of an SRF to establish its scope, including minimum size and functionality, budgetary requirements (capital cost, operating costs, cost profile), and development schedule. The approach was to arrange for three independent design studies, each led by an architectural design firm, and compare the results. While there were many design elements in common identified by each study team, there were significant differences in the way human operators were to interact with the systems. In aggregate, the design studies provided insight into the attributes of a future SRF and the complex factors to consider for future programmatic planning.

Eco-innovative design approach: Integrating quality and environmental aspects in prioritizing and solving engineering problems

NASA Astrophysics Data System (ADS)

Chakroun, Mahmoud; Gogu, Grigore; Pacaud, Thomas; Thirion, François

2014-09-01

This study proposes an eco-innovative design process taking into consideration quality and environmental aspects in prioritizing and solving technical engineering problems. This approach provides a synergy between the Life Cycle Assessment (LCA), the nonquality matrix, the Theory of Inventive Problem Solving (TRIZ), morphological analysis and the Analytical Hierarchy Process (AHP). In the sequence of these tools, LCA assesses the environmental impacts generated by the system. Then, for a better consideration of environmental aspects, a new tool is developed, the non-quality matrix, which defines the problem to be solved first from an environmental point of view. The TRIZ method allows the generation of new concepts and contradiction resolution. Then, the morphological analysis offers the possibility of extending the search space of solutions in a design problem in a systematic way. Finally, the AHP identifies the promising solution(s) by providing a clear logic for the choice made. Their usefulness has been demonstrated through their application to a case study involving a centrifugal spreader with spinning discs.

Radiation Effects and Protection for Moon and Mars Missions

NASA Technical Reports Server (NTRS)

Parnell, Thomas A.; Watts, John W., Jr.; Armstrong, Tony W.

1998-01-01

Manned and robotic missions to the Earth's moon and Mars are exposed to a continuous flux of Galactic Cosmic Rays (GCR) and occasional, but intense, fluxes of Solar Energetic Particles (SEP). These natural radiations impose hazards to manned exploration, but also present some constraints to the design of robotic missions. The hazards to interplanetary flight crews and their uncertainties have been studied recently by a National Research Council Committee (Space Studies Board 1996). Considering the present uncertainty estimates, thick spacecraft shielding would be needed for manned missions, some of which could be accomplished with onboard equipment and expendables. For manned and robotic missions, the effects of radiation on electronics, sensors, and controls require special consideration in spacecraft design. This paper describes the GCR and SEP particle fluxes, secondary particles behind shielding, uncertainties in radiobiological effects and their impact on manned spacecraft design, as well as the major effects on spacecraft equipment. The principal calculational tools and considerations to mitigate the radiation effects are discussed, and work in progress to reduce uncertainties is included.

An integrated optimum design approach for high speed prop-rotors including acoustic constraints

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Wells, Valana; Mccarthy, Thomas; Han, Arris

1993-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop multilevel decomposition optimization process. The procedures involve the consideration of blade-aeroelastic aerodynamic performance, structural-dynamic design requirements, and acoustics. Further, since the design involves consideration of several different objective functions, multiobjective function formulation techniques are developed.

Wireless Power Transfer for Space Applications

NASA Technical Reports Server (NTRS)

Ramos, Gabriel Vazquez; Yuan, Jiann-Shiun

2011-01-01

This paper introduces an implementation for magnetic resonance wireless power transfer for space applications. The analysis includes an equivalent impedance study, loop material characterization, source/load resonance coupling technique, and system response behavior due to loads variability. System characterization is accomplished by executing circuit design from analytical equations and simulations using Matlab and SPICE. The theory was validated by a combination of different experiments that includes loop material consideration, resonance coupling circuits considerations, electric loads considerations and a small scale proof-of-concept prototype. Experiment results shows successful wireless power transfer for all the cases studied. The prototype provided about 4.5 W of power to the load at a separation of -5 cm from the source using a power amplifier rated for 7 W.

Guidelines and Capabilities for Designing Human Missions

NASA Technical Reports Server (NTRS)

Allen, Christopher S.; Burnett, Rebeka; Charles, John; Cucinotta, Frank; Fullerton, Richard; Goodman, Jerry R.; Griffith, Anthony D., Sr.; Kosmo, Joseph J.; Perchonok, Michele; Railsback, Jan;

Space Operations Center, shuttle interaction study, volume 1

NASA Technical Reports Server (NTRS)

1981-01-01

The implication of using the Shuttle with the SOC, including constraints that the Shuttle places upon the SOC design is studied. The considerations involved in the use of the Shuttle as a part of the SOC concept, and the constraints to the SOC imposed by the Shuttle in its interactions with the SOC, and on the design or technical solutions which allow satisfactory accomplishment of the interactions are identified.

SAMPLE DESIGN CONSIDERATIONS FOR INDOOR AIR EXPOSURE SURVEYS

EPA Science Inventory

Recent studies have shown that the traditional practice of monitoring outdoor (ambient) air quality leads to little information regarding the exposures of people in indoor surroundings. Consequently, EPA has begun a series of studies to determine the air pollution exposures peopl...

Increasing value and reducing waste in research design, conduct, and analysis.

PubMed

Ioannidis, John P A; Greenland, Sander; Hlatky, Mark A; Khoury, Muin J; Macleod, Malcolm R; Moher, David; Schulz, Kenneth F; Tibshirani, Robert

2014-01-11

Correctable weaknesses in the design, conduct, and analysis of biomedical and public health research studies can produce misleading results and waste valuable resources. Small effects can be difficult to distinguish from bias introduced by study design and analyses. An absence of detailed written protocols and poor documentation of research is common. Information obtained might not be useful or important, and statistical precision or power is often too low or used in a misleading way. Insufficient consideration might be given to both previous and continuing studies. Arbitrary choice of analyses and an overemphasis on random extremes might affect the reported findings. Several problems relate to the research workforce, including failure to involve experienced statisticians and methodologists, failure to train clinical researchers and laboratory scientists in research methods and design, and the involvement of stakeholders with conflicts of interest. Inadequate emphasis is placed on recording of research decisions and on reproducibility of research. Finally, reward systems incentivise quantity more than quality, and novelty more than reliability. We propose potential solutions for these problems, including improvements in protocols and documentation, consideration of evidence from studies in progress, standardisation of research efforts, optimisation and training of an experienced and non-conflicted scientific workforce, and reconsideration of scientific reward systems. Copyright © 2014 Elsevier Ltd. All rights reserved.

Indications and Warning Analysis Management System IWAMS. A Design Study

DTIC Science & Technology

1980-03-01

First, we must understand the process of warning analysis; we must develop an -;adequate functional model. In the present research we have divided ...and changeable). (In subsequent discussions, considerable attention will be focused on these issues.) -77-7-12Z ’m,77+-U 21 WARNING ANALYSIS MODEL...have charted limitations in man’s memory, attention span, reasoning capability and other cognitive functions. These limitations considerably affect man’s

Small Satellite Formations for Distributed Surveillance: System Design and Optimal Control Considerations (Formations de petits satellites pour une surveillance distribuee: Considerations relatives la conception de systeme et a l’optimisation de commandes)

DTIC Science & Technology

2009-04-01

System Analysis and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These bodies are... Industriales GRUPO M.TORRES Ctra. Pamplona-Huesca, Km.9 31119 Torres de Elorz (Navarra) Spain +34 948 317 811 +34 948 317 952 irene.eguinoa@mtorres.es

Applied Nuclear Accountability Systems: A Case Study in the System Architecture and Development of NuMAC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, Andrea Beth

2004-07-01

This is a case study of the NuMAC nuclear accountability system developed at a private fuel fabrication facility. This paper investigates nuclear material accountability and safeguards by researching expert knowledge applied in the system design and development. Presented is a system developed to detect and deter the theft of weapons grade nuclear material. Examined is the system architecture that includes: issues for the design and development of the system; stakeholder issues; how the system was built and evolved; software design, database design, and development tool considerations; security and computing ethics. (author)

SSTO vs TSTO design considerations—an assessment of the overall performance, design considerations, technologies, costs, and sensitivities of SSTO and TSTO designs using modern technologies

NASA Astrophysics Data System (ADS)

Penn, Jay P.

1996-03-01

It is generally believed by those skilled in launch system design that Single-Stage-To-Orbit (SSTO) designs are more technically challenging, more performance sensitive, and yield larger lift-off weights than do Two-Stage-To-Orbit designs (TSTO's) offering similar payload delivery capability. Without additional insight into the other considerations which drive the development, recurring costs, operability, and reliability of a launch fleet, an analyst may easily conclude that the higher performing, less sensitive TSTO designs, thus yield a better solution to achieving low cost payload delivery. This limited insight could justify an argument to eliminate the X-33 SSTO technology/demonstration development effort, and thus proceed directly to less risky TSTO designs. Insight into real world design considerations of launch vehicles makes the choice of SSTO vs TSTO much less clear. The presentation addresses a more comprehensive evaluation of the general class of SSTO and TSTO concepts. These include pure SSTO's, augmented SSTO's, Siamese Twin, and Pure TSTO designs. The assessment considers vehicle performance and scaling relationships which characterize real vehicle designs. The assessment also addresses technology requirements, operations and supportability, cost implications, and sensitivities. Results of the assessment indicate that the trade space between various SSTO and TSTO design approaches is complex and not yet fully understood. The results of the X-33 technology demonstrators, as well as additional parametric analysis is required to better define the relative performance and costs of the various design approaches. The results also indicate that with modern technologies and today's better understanding of vehicle design considerations, the perception that SSTO's are dramatically heavier and more sensitive than TSTO designs is more of a myth, than reality.

Size and burden of mental disorders in Europe--a critical review and appraisal of 27 studies.

PubMed

Wittchen, Hans-Ulrich; Jacobi, Frank

2005-08-01

Epidemiological data on a wide range of mental disorders from community studies conducted in European countries are presented to determine the availability and consistency of prevalence, disability and treatment findings for the EU. Using a stepwise multimethod approach, 27 eligible studies with quite variable designs and methods including over 150,000 subjects from 16 European countries were identified. Prevalence: On the basis of meta-analytic techniques as well as on reanalyses of selected data sets, it is estimated that about 27% (equals 82.7 million; 95% CI: 78.5-87.1) of the adult EU population, 18-65 of age, is or has been affected by at least one mental disorder in the past 12 months. Taking into account the considerable degree of comorbidity (about one third had more than one disorder), the most frequent disorders are anxiety disorders, depressive, somatoform and substance dependence disorders. When taking into account design, sampling and other methodological differences between studies, little evidence seems to exist for considerable cultural or country variation. Disability and treatment: despite very divergent and fairly crude assessment strategies, the available data consistently demonstrate (a) an association of all mental disorders with a considerable disability burden in terms of number of work days lost (WLD) and (b) generally low utilization and treatment rates. Only 26% of all cases had any consultation with professional health care services, a finding suggesting a considerable degree of unmet need. The paper highlights considerable future research needs for coordinated EU studies across all disorders and age groups. As prevalence estimates could not simply be equated with defined treatment needs, such studies should determine the degree of met and unmet needs for services by taking into account severity, disability and comorbidity. These needs are most pronounced for the new EU member states as well as more generally for adolescent and older populations.

Clinical application of antidepressant pharmacogenetics: considerations for the design of future studies.

PubMed

Fabbri, Chiara; Serretti, Alessandro

2018-06-12

A frustrating inertia has affected the development of clinical applications of antidepressant pharmacogenetics and personalized treatments of depression are still lacking 20 years after the first findings. Candidate gene studies provided replicated findings for some polymorphisms, but each of them shows at best a small effect on antidepressant efficacy and the cumulative effect of different polymorphisms is unclear. Further, no candidate was immune by at least some negative studies. These considerations give rise to some concerns about the clinical benefits of currently available pharmacogenetic tests since they are based on the results of candidate gene studies. Clinical guidelines in fact suggest that only polymorphisms that alter cytochrome 2D6 or 2C19 enzymatic activity probably provide useful clinical indications, while variants in genes involved in antidepressant pharmacodynamics have no recommended clinical applications. The present review discusses possible strategies to facilitate the identification of genetic biomarkers with clinical usefulness in guiding antidepressant treatments. These include analysis methods for the study of the polygenic/omnigenic nature of antidepressant response, the prioritization of polymorphisms on the basis of functional considerations, the incorporation of clinical-demographic predictors in pharmacogenetic studies (e.g. mixed polygenic and clinical risk scores), the application of methodological improvements to the design of future studies in order to maximize the comparability of results and improve power. Copyright © 2018. Published by Elsevier B.V.

Statistical considerations in monitoring birds over large areas

USGS Publications Warehouse

Johnson, D.H.

2000-01-01

The proper design of a monitoring effort depends primarily on the objectives desired, constrained by the resources available to conduct the work. Typically, managers have numerous objectives, such as determining abundance of the species, detecting changes in population size, evaluating responses to management activities, and assessing habitat associations. A design that is optimal for one objective will likely not be optimal for others. Careful consideration of the importance of the competing objectives may lead to a design that adequately addresses the priority concerns, although it may not be optimal for any individual objective. Poor design or inadequate sample sizes may result in such weak conclusions that the effort is wasted. Statistical expertise can be used at several stages, such as estimating power of certain hypothesis tests, but is perhaps most useful in fundamental considerations of describing objectives and designing sampling plans.

Technical challenges in designing post-marketing eCRFs to address clinical safety and pharmacovigilance needs.

PubMed

Lu, Zhengwu

2010-01-01

To identify key challenges and propose technical considerations in designing electronic case report form (eCRF) for post-marketing studies, the author undertakes a comprehensive literature review of peer reviewed and grey literature to assess the key aspects, processes, standards, recommendations, and best practices in designing eCRFs based on industry experience in designing and supporting electronic data capture (EDC) studies. Literature search using strings on MEDLINE and PUBMED returned few papers directly related to CRF design. Health informatics and general practice journals were searched and results reviewed. Many conference, government commission, health professional and special interests group websites provide relevant information from practical experience - summarization of this information is presented. Further, we presented a list of concrete technical considerations in dealing with EDC technology/system limitations based on literature assessment and industry implementation experience. It is recognized that cross-functional teams be involved in eCRF design process and decision making. To summarize the keys in designing eCRFs to address post-market study safety and pharmacovigilance needs, the first is to identify required data elements from the study protocol supporting data analyses and reporting requirements. Secondly, accepted best practices, CDASH & CDISC guidelines, and company internal or therapeutic unit standard should be considered and applied. Coding (MedDRA & WHODD) mapping should be managed and implemented as well when possible. Finally, we need to be on top of the EDC technologies, challenge the technologies, drive EDC improvement via working with vendors, and utilize the technologies to drive clinical effectiveness. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Multistate approaches in computational protein design

PubMed Central

Davey, James A; Chica, Roberto A

2012-01-01

Computational protein design (CPD) is a useful tool for protein engineers. It has been successfully applied towards the creation of proteins with increased thermostability, improved binding affinity, novel enzymatic activity, and altered ligand specificity. Traditionally, CPD calculations search and rank sequences using a single fixed protein backbone template in an approach referred to as single-state design (SSD). While SSD has enjoyed considerable success, certain design objectives require the explicit consideration of multiple conformational and/or chemical states. Cases where a “multistate” approach may be advantageous over the SSD approach include designing conformational changes into proteins, using native ensembles to mimic backbone flexibility, and designing ligand or oligomeric association specificities. These design objectives can be efficiently tackled using multistate design (MSD), an emerging methodology in CPD that considers any number of protein conformational or chemical states as inputs instead of a single protein backbone template, as in SSD. In this review article, recent examples of the successful design of a desired property into proteins using MSD are described. These studies employing MSD are divided into two categories—those that utilized multiple conformational states, and those that utilized multiple chemical states. In addition, the scoring of competing states during negative design is discussed as a current challenge for MSD. PMID:22811394

Design Considerations for Creating a Chemical Information Workstation.

ERIC Educational Resources Information Center

Mess, John A.

1995-01-01

Discusses what a functional chemical information workstation should provide to support the users in an academic library and examines how it can be implemented. Highlights include basic design considerations; natural language interface, including grammar-based, context-based, and statistical methodologies; expert system interface; and programming…

Lunar Module Electrical Power System Design Considerations and Failure Modes

NASA Technical Reports Server (NTRS)

Interbartolo, Michael

2009-01-01

This slide presentation reviews the design and redesign considerations of the Apollo lunar module electrical power system. Included in the work are graphics showing the lunar module power system. It describes the in-flight failures, and the lessons learned from these failures.

Methodological considerations in the design and implementation of clinical trials.

PubMed

Cirrincione, Constance T; Lavoie Smith, Ellen M; Pang, Herbert

2014-02-01

To review study design issues related to clinical trials led by oncology nurses, with special attention to those conducted within the cooperative group setting; to emphasize the importance of the statistician's role in the process of clinical trials. Studies available at clinicaltrials.gov using experimental designs that have been published in peer-reviewed journals; cooperative group trials are highlighted. The clinical trial is a primary means to test intervention efficacy. A properly designed and powered study with clear and measurable objectives is as important as the intervention itself. Collaboration among the study team, including the statistician, is central in developing and conducting appropriately designed studies. For optimal results, collaboration is an ongoing process that should begin early on. Copyright © 2014 Elsevier Inc. All rights reserved.

Human Factors Considerations in System Design

NASA Technical Reports Server (NTRS)

Mitchell, C. M. (Editor); Vanbalen, P. M. (Editor); Moe, K. L. (Editor)

1983-01-01

Human factors considerations in systems design was examined. Human factors in automated command and control, in the efficiency of the human computer interface and system effectiveness are outlined. The following topics are discussed: human factors aspects of control room design; design of interactive systems; human computer dialogue, interaction tasks and techniques; guidelines on ergonomic aspects of control rooms and highly automated environments; system engineering for control by humans; conceptual models of information processing; information display and interaction in real time environments.

Preliminary design of turbopumps and related machinery

NASA Technical Reports Server (NTRS)

Wislicenus, George F.

1986-01-01

Pumps used in large liquid-fuel rocket engines are examined. The term preliminary design denotes the initial, creative phases of design, where the general shape and characteristics of the machine are determined. This compendium is intended to provide the design engineer responsible for these initial phases with a physical understanding and background knowledge of the numerous special fields involved in the design process. Primary attention is directed to the pumping part of the turbopump and hence is concerned with essentially incompressible fluids. However, compressible flow principles are developed. As much as possible, the simplicity and reliability of incompressible flow considerations are retained by treating the mechanics of compressible fluids as a departure from the theory of incompressible fluids. Five areas are discussed: a survey of the field of turbomachinery in dimensionless form; the theoretical principles of the hydrodynamic design of turbomachinery; the hydrodynamic and gas dynamic design of axial flow turbomachinery; the hydrodynamic and gas dynamic design of radial and mixed flow turbomachinery; and some mechanical design considerations of turbomachinery. Theoretical considerations are presented with a relatively elementary mathematical treatment.

Standards for Clinical Trials in Male and Female Sexual Dysfunction: I. Phase I to Phase IV Clinical Trial Design.

PubMed

Fisher, William A; Gruenwald, Ilan; Jannini, Emmanuele A; Lev-Sagie, Ahinoam; Lowenstein, Lior; Pyke, Robert E; Reisman, Yakov; Revicki, Dennis A; Rubio-Aurioles, Eusebio

2016-12-01

This series of articles outlines standards for clinical trials of treatments for male and female sexual dysfunctions, with a focus on research design and patient-reported outcome assessment. These articles consist of revision, updating, and integration of articles on standards for clinical trials in male and female sexual dysfunction from the 2010 International Consultation on Sexual Medicine developed by the authors as part of the 2015 International Consultation on Sexual Medicine. We are guided in this effort by several principles. In contrast to previous versions of these guidelines, we merge discussion of standards for clinical trials in male and female sexual dysfunction in an integrated approach that emphasizes the common foundational practices that underlie clinical trials in the two settings. We present a common expected standard for clinical trial design in male and female sexual dysfunction, a common rationale for the design of phase I to IV clinical trials, and common considerations for selection of study population and study duration in male and female sexual dysfunction. We present a focused discussion of fundamental principles in patient- (and partner-) reported outcome assessment and complete this series of articles with specific discussions of selected aspects of clinical trials that are unique to male and to female sexual dysfunction. Our consideration of standards for clinical trials in male and female sexual dysfunction attempts to embody sensitivity to existing and new regulatory guidance and to address implications of the evolution of the diagnosis of sexual dysfunction that have been brought forward in the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition. The first article in this series focuses on phase I to phase IV clinical trial design considerations. Subsequent articles in this series focus on the measurement of patient-reported outcomes, unique aspects of clinical trial design for men, and unique aspects of clinical trial design for women. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Estimation of design space for an extrusion-spheronization process using response surface methodology and artificial neural network modelling.

PubMed

Sovány, Tamás; Tislér, Zsófia; Kristó, Katalin; Kelemen, András; Regdon, Géza

2016-09-01

The application of the Quality by Design principles is one of the key issues of the recent pharmaceutical developments. In the past decade a lot of knowledge was collected about the practical realization of the concept, but there are still a lot of unanswered questions. The key requirement of the concept is the mathematical description of the effect of the critical factors and their interactions on the critical quality attributes (CQAs) of the product. The process design space (PDS) is usually determined by the use of design of experiment (DoE) based response surface methodologies (RSM), but inaccuracies in the applied polynomial models often resulted in the over/underestimation of the real trends and changes making the calculations uncertain, especially in the edge regions of the PDS. The completion of RSM with artificial neural network (ANN) based models is therefore a commonly used method to reduce the uncertainties. Nevertheless, since the different researches are focusing on the use of a given DoE, there is lack of comparative studies on different experimental layouts. Therefore, the aim of present study was to investigate the effect of the different DoE layouts (2 level full factorial, Central Composite, Box-Behnken, 3 level fractional and 3 level full factorial design) on the model predictability and to compare model sensitivities according to the organization of the experimental data set. It was revealed that the size of the design space could differ more than 40% calculated with different polynomial models, which was associated with a considerable shift in its position when higher level layouts were applied. The shift was more considerable when the calculation was based on RSM. The model predictability was also better with ANN based models. Nevertheless, both modelling methods exhibit considerable sensitivity to the organization of the experimental data set, and the use of design layouts is recommended, where the extreme values factors are more represented. Copyright © 2016 Elsevier B.V. All rights reserved.

Energy efficient engine: Flight propulsion system preliminary analysis and design

NASA Technical Reports Server (NTRS)

Johnston, R. P.; Beitler, R. S.; Bobinger, R. O.; Broman, C. L.; Gravitt, R. D.; Heineke, H.; Holloway, P. R.; Klem, J. S.; Nash, D. O.; Ortiz, P.

1980-01-01

The characteristics of an advanced flight propulsion system (FPS), suitable for introduction in the late 1980's to early 1990's, was more fully defined. It was determined that all goals for efficiency, environmental considerations, and economics could be met or exceeded with the possible exception of NOx emission. In evaluating the FPS, all aspects were considered including component design, performance, weight, initial cost, maintenance cost, engine system integration (including nacelle), and aircraft integration considerations. The current FPS installed specific fuel consumption was reduced 14.2% from that of the CF6-50C reference engine. When integrated into an advanced, subsonic, study transport, the FPS produced a fuel burn savings of 15 to 23% and a direct operating cost reduction of 5 to 12% depending on the mission and study aircraft characteristics relative to the reference engine.

Design of 3D-Printed Titanium Compliant Mechanisms

NASA Technical Reports Server (NTRS)

Merriam, Ezekiel G.; Jones, Jonathan E.; Howell, Larry L.

2014-01-01

This paper describes 3D-printed titanium compliant mechanisms for aerospace applications. It is meant as a primer to help engineers design compliant, multi-axis, printed parts that exhibit high performance. Topics covered include brief introductions to both compliant mechanism design and 3D printing in titanium, material and geometry considerations for 3D printing, modeling techniques, and case studies of both successful and unsuccessful part geometries. Key findings include recommended flexure geometries, minimum thicknesses, and general design guidelines for compliant printed parts that may not be obvious to the first time designer.

Planetary mission requirements, technology and design considerations for a solar electric propulsion stage

NASA Technical Reports Server (NTRS)

Cork, M. J.; Hastrup, R. C.; Menard, W. A.; Olson, R. N.

1979-01-01

High energy planetary missions such as comet rendezvous, Saturn orbiter and asteroid rendezvous require development of a Solar Electric Propulsion Stage (SEPS) for augmentation of the Shuttle-IUS. Performance and functional requirements placed on the SEPS are presented. These requirements will be used in evolution of the SEPS design, which must be highly interactive with both the spacecraft and the mission design. Previous design studies have identified critical SEPS technology areas and some specific design solutions which are also presented in the paper.

The Impact of Visibility on Teamwork, Collaborative Communication, and Security in Emergency Departments: An Exploratory Study.

PubMed

Gharaveis, Arsalan; Hamilton, D Kirk; Pati, Debajyoti; Shepley, Mardelle

2017-01-01

The aim of this study was to examine the influence of visibility on teamwork, collaborative communication, and security issues in emergency departments (EDs). This research explored whether with high visibility in EDs, teamwork and collaborative communication can be improved while the security issues will be reduced. Visibility has been regarded as a critical design consideration and can be directly and considerably impacted by ED's physical design. Teamwork is one of the major related operational outcomes of visibility and involves nurses, support staff, and physicians. The collaborative communication in an ED is another important factor in the process of care delivery and affects efficiency and safety. Furthermore, security is a behavioral factor in ED designs, which includes all types of safety including staff safety, patient safety, and the safety of visitors and family members. This qualitative study investigated the impact of visibility on teamwork, collaborative communication, and security issues in the ED. One-on-one interviews and on-site observation sessions were conducted in a community hospital. Corresponding data analysis was implemented by using computer plan analysis, observation and interview content, and theme analyses. The findings of this exploratory study provided a framework to identify visibility as an influential factor in ED design. High levels of visibility impact productivity and efficiency of teamwork and communication and improve the chance of lowering security issues. The findings of this study also contribute to the general body of knowledge about the effect of physical design on teamwork, collaborative communication, and security.

Shipyard Standards Program Development Guide

DTIC Science & Technology

1992-10-01

Given the opportunity, designers will use designs that have worked for them in the past . Unfortunately, not all designers have the same experience base...standards formally approved by shipyard management? The subject of labor productivity standards has received considerable attention during the past decade. A...research into this consideration during the past decade. References [23], [24], [25], [26], and [27] have reported beneficial results obtained by getting the

Microcomputer Program Design Considerations for the Novice User

DTIC Science & Technology

1987-03-01

relatively recent, widespread proliferation of microcomputers into both the home and work place has resulted in a shifting of computer operation and...design decisions be made with respect to both the requirements specifications and interface considerations. Since a project’s requirement...expertise, may be quite meaningless or confusing to the end user. It is therefore proposed that interface design decisions should be made under the assumption

A person-centered approach to study intimacy and sexuality in residential care facility (RCF) clients with dementia: Methodological considerations and a guide to study design.

PubMed

Roelofs, Tineke S M; Luijkx, Katrien G; Embregts, Petri J C M

2017-01-01

The person-centered perspective of residential care facility (RCF) residents with dementia with regard to their intimate and sexual lives is largely neglected in research. We aim to provide methodological considerations and reflections on a performed qualitative study. Recommendations and a guide to study design are provided to inform and encourage future research on the inclusion of people with dementia as participants. Methodological recommendations and reflections are described in chronological order of the procedure. Fragments of interviews are included for further illustration and clarification. Considering preparation, close involvement of clinical practice, and extensive deliberation regarding study design tended to be important. Considering procedure, investment in contacts with clinical practice and authorized representatives; an introduction meeting; person-centered inclusion and consent; profound skills in interviewing participants with dementia; and flexibility in data collection were proven of importance. Considering data analysis and study quality, including field notes and aiming at a balance between study quality and practicability to enhance study 'rigor' were found important. Including the person-centered perspective in research on intimacy and sexuality of RCF residents with dementia, is challenging and takes a flexible and creative approach. It is, however, worthwhile to close the gap in literature.

Study of the application of hydrogen fuel to long-range subsonic transport aircraft. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.; Lange, R. H.; Moore, J. W.

1975-01-01

The feasibility of using liquid hydrogen as fuel in advanced designs of long range, subsonic transport aircraft is assessed. Both passenger and cargo type aircraft are investigated. Comparisons of physical, performance, and economic parameters of the LH2 fueled designs with conventionally fueled aircraft are presented. Design studies are conducted to determine appropriate characteristics for the hydrogen related systems required on board the aircraft. These studies included consideration of material, structural, and thermodynamic requirements of the cryogenic fuel tanks and fuel systems with the structural support and thermal protection systems.

Research design considerations for confirmatory chronic pain clinical trials: IMMPACT recommendations.

PubMed

Dworkin, Robert H; Turk, Dennis C; Peirce-Sandner, Sarah; Baron, Ralf; Bellamy, Nicholas; Burke, Laurie B; Chappell, Amy; Chartier, Kevin; Cleeland, Charles S; Costello, Ann; Cowan, Penney; Dimitrova, Rozalina; Ellenberg, Susan; Farrar, John T; French, Jacqueline A; Gilron, Ian; Hertz, Sharon; Jadad, Alejandro R; Jay, Gary W; Kalliomäki, Jarkko; Katz, Nathaniel P; Kerns, Robert D; Manning, Donald C; McDermott, Michael P; McGrath, Patrick J; Narayana, Arvind; Porter, Linda; Quessy, Steve; Rappaport, Bob A; Rauschkolb, Christine; Reeve, Bryce B; Rhodes, Thomas; Sampaio, Cristina; Simpson, David M; Stauffer, Joseph W; Stucki, Gerold; Tobias, Jeffrey; White, Richard E; Witter, James

2010-05-01

There has been an increase in the number of chronic pain clinical trials in which the treatments being evaluated did not differ significantly from placebo in the primary efficacy analyses despite previous research suggesting that efficacy could be expected. These findings could reflect a true lack of efficacy or methodological and other aspects of these trials that compromise the demonstration of efficacy. There is substantial variability among chronic pain clinical trials with respect to important research design considerations, and identifying and addressing any methodological weaknesses would enhance the likelihood of demonstrating the analgesic effects of new interventions. An IMMPACT consensus meeting was therefore convened to identify the critical research design considerations for confirmatory chronic pain trials and to make recommendations for their conduct. We present recommendations for the major components of confirmatory chronic pain clinical trials, including participant selection, trial phases and duration, treatment groups and dosing regimens, and types of trials. Increased attention to and research on the methodological aspects of confirmatory chronic pain clinical trials has the potential to enhance their assay sensitivity and ultimately provide more meaningful evaluations of treatments for chronic pain. Copyright 2010 International Association for the Study of Pain. All rights reserved.

The Ulysses Reference Mission (URM); Proceedings of the EUROAVIA Design Workshop, Friedrichshafen, Federal Republic of Germany, Apr. 8-19, 1991

NASA Astrophysics Data System (ADS)

The present design symposium on the Ulysses Reference Mission (URM) provides data on the feasibility of the URM with particular attention given to reference data for Ulysses in the ecliptic plane as it passes the southern and northern pole areas of the sun. Specific issues addressed during the design workshop include the scientific objectives of the URM, the elements of the URM payload, the configuration and structural elements of the spacecraft, thermal control requirements and considerations, a system-engineering analysis, and the scientific subsystems of the URM. Also examined are the solar array and battery package, power control and distribution, technology considerations for the transmission of telemetric data, and a functional analysis of the URM on-board data-handling equipment. The description of the workshop concludes by noting that design studies are required to establish the moment of inertia and center of gravity of the URM spacecraft as well as specific mission parameters.

Tracking and Data Relay Satellite System user impact and network compatibility study. [antenna design and telecommunication links

NASA Technical Reports Server (NTRS)

1973-01-01

The report contains data on antenna configurations for the low data rate users of the Tracking and Data Relay Satellite System (TDRSS). It treats the coverage and mutual visibility considerations between the user satellites and the relay satellites and relates these considerations to requirements of antenna beamwidth and fractional user orbital coverage. A final section includes user/TDRS telecommunication link budgets and forward and return link data rate tradeoffs.

Study to develop improved fire resistant aircraft passenger seat materials

NASA Technical Reports Server (NTRS)

Duskin, F. E.; Schutter, K. J.; Sieth, H. H.; Trabold, E. L.

1980-01-01

The Phase 3 study of the NASA 'Improved Fire Resistant Aircraft Seat Materials' involved fire tests of improved materials in multilayered combinations representative of cushion configurations. Tests were conducted to determine their thermal, smoke, and fire resistance characteristics. Additionally, a 'Design Guideline' for Fire Resistant Passenger Seats was written outlining general seat design considerations. Finally, a three-abreast 'Tourist Class' passenger seat assembly fabricated from the most advanced fire-resistant materials was delivered.

Tech notes: Ongoing or planned hydro research, results of recent studies, and reviews of new books, publications, and software

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Ongoing or planned hydro research, results of recent studies, and reviews of new books, publications, and software. Items covered this month include: (1) a recommendation that dam designers give more consideration to earthquake resistance, (2) the development of a new wave rotor design, (3) the development of a small hydro database in China, and (4) an ICOLD bulletin on the optimization of constuction costs.

Measuring Maternal Behaviors in the Neonatal Intensive Care Unit

ERIC Educational Resources Information Center

Lakes, Kimberley D.; Guo, Yuqing; Taylor Lucas, Candice; Cooper, Dan

2017-01-01

One of the most important considerations in designing clinical infant research studies is the selection of reliable and valid measurement procedures. Few measures of caregiver-child interactions have been studied with newborns, particularly premature infants. The main objective of this study was to examine psychometric properties of the National…

Teachers and Seating Arrangements and Assignments: A Qualitative Study

ERIC Educational Resources Information Center

Kinahan, Mary P.

2017-01-01

Seating assignments and arrangements are utilized in every school classroom. This qualitative study explored the perceptions that teachers have on seating assignments and arrangements to gain a better understanding of how they make design considerations which impact their students. The questions that guide this study are: How do elementary…

Research: increasing value, reducing waste 2

PubMed Central

Ioannidis, John P A; Greenland, Sander; Hlatky, Mark A; Khoury, Muin J; Macleod, Malcolm R; Moher, David; Schulz, Kenneth F; Tibshirani, Robert

2015-01-01

Correctable weaknesses in the design, conduct, and analysis of biomedical and public health research studies can produce misleading results and waste valuable resources. Small effects can be difficult to distinguish from bias introduced by study design and analyses. An absence of detailed written protocols and poor documentation of research is common. Information obtained might not be useful or important, and statistical precision or power is often too low or used in a misleading way. Insufficient consideration might be given to both previous and continuing studies. Arbitrary choice of analyses and an overemphasis on random extremes might affect the reported findings. Several problems relate to the research workforce, including failure to involve experienced statisticians and methodologists, failure to train clinical researchers and laboratory scientists in research methods and design, and the involvement of stakeholders with conflicts of interest. Inadequate emphasis is placed on recording of research decisions and on reproducibility of research. Finally, reward systems incentivise quantity more than quality, and novelty more than reliability. We propose potential solutions for these problems, including improvements in protocols and documentation, consideration of evidence from studies in progress, standardisation of research efforts, optimisation and training of an experienced and non-conflicted scientific workforce, and reconsideration of scientific reward systems. PMID:24411645

Proceedings: CE (Corps of Engineers) Workshop on Design and Operation of Selective Withdrawal Intake Structures Held in San Francisco, California on 24-28 June 1985.

DTIC Science & Technology

1986-05-01

design of the outlet works for Warm Springs Dam on Dry Creek in Sonoma County , California, are discussed. Water quality design considerations include both...on Dry Creek, "-’- a right-bank tributary of the Russian River, approximately 14 river miles upstream of their confluence in Sonoma County , California...Dry Creek, Sonoma County , California, are discussed. Water quality design considerations include both temperature and turbidity of discharged water

[Diagnossis and treatment of complicated anterior teeth esthetic defects by combination of whole-process digital esthetic rehabilitation with periodontic surgery].

PubMed

Li, Z; Liu, Y S; Ye, H Q; Liu, Y S; Hu, W J; Zhou, Y S

2017-02-18

To explore a new method of whole-process digital esthetic prosthodontic rehabilitation combined with periodontic surgery for complicated anterior teeth esthetic defects accompanied by soft tissue morphology, to provide an alternative choice for solving this problem under the guidance of three-dimensional (3D) printing digital dental model and surgical guide, thus completing periodontic surgery and digital esthetic rehabilitation of anterior teeth. In this study, 12 patients with complicated esthetic problems accompanied by soft tissue morphology in their anterior teeth were included. The dentition and facial images were obtained by intra-oral scanning and three-dimensional (3D) facial scanning and then calibrated. Two esthetic designs and prosthodontic outcome predictions were created by computer aided design /computer aided manufacturing (CAD/CAM) software combined with digital photography, including consideration of white esthetics and comprehensive consideration of pink-white esthetics. The predictive design of prostheses and the facial appearances of the two designs were evaluated by the patients. If the patients chose the design of comprehensive consideration of pink-white esthetics, they would choose whether they would receive periodontic surgery before esthetic rehabilitation. The dentition design cast of those who chose periodontic surgery would be 3D printed for the guide of periodontic surgery accordingly. In light of the two digital designs based on intra-oral scanning, facing scanning and digital photography, the satisfaction rate of the patients was significantly higher for the comprehensive consideration of pink-white esthetic design (P<0.05) and more patients tended to choose priodontic surgery before esthetic rehabilitation. The 3D printed digital dental model and surgical guide provided significant instructions for periodontic surgery, and achieved success transfer from digital design to clinical application. The prostheses were fabricated by CAD/CAM, thus realizing the whole-process digital esthetic rehabilitation. The new method for esthetic rehabilitation of complicated anterior teeth esthetic defects accompanied by soft tissue morphology, including patient-involved digital esthetic analysis, design, esthetic outcome prediction, 3D printing surgical guide for periodontic surgery and digital fabrication is a practical technology. This method is useful for improvement of clinical communication efficiency between doctor-patient, doctor-technician and doctors from different departments, and is conducive to multidisciplinary treatment of this complicated anterior teeth esthetic problem.

Overview of the Design, Development, and Application of Nickel-hydrogen Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Zimmerman, Albert H.

2003-01-01

This document provides an overview of the design, development, and application of nickel-hydrogen (Ni-H2) battery technology for aerospace applications. It complements and updates the information presented in NASA RP-1314, NASA Handbook for Nickel- Hydrogen Batteries, published in 1993. Since that time, nickel-hydrogen batteries have become widely accepted for aerospace energy storage requirements and much more has been learned. The intent of this document is to capture some of that additional knowledge. This document addresses various aspects of nickel-hydrogen technology including the electrochemical reactions, cell component design, and selection considerations; overall cell and battery design considerations; charge control considerations; and manufacturing issues that have surfaced over the years that nickel-hydrogen battery technology has been the major energy storage technology for geosynchronous and low-Earth-orbiting satellites.

Carrier rockets

NASA Astrophysics Data System (ADS)

Aleksandrov, V. A.; Vladimirov, V. V.; Dmitriev, R. D.; Osipov, S. O.

This book takes into consideration domestic and foreign developments related to launch vehicles. General information concerning launch vehicle systems is presented, taking into account details of rocket structure, basic design considerations, and a number of specific Soviet and American launch vehicles. The basic theory of reaction propulsion is discussed, giving attention to physical foundations, the various types of forces acting on a rocket in flight, basic parameters characterizing rocket motion, the effectiveness of various approaches to obtain the desired velocity, and rocket propellants. Basic questions concerning the classification of launch vehicles are considered along with construction and design considerations, aspects of vehicle control, reliability, construction technology, and details of structural design. Attention is also given to details of rocket motor design, the basic systems of the carrier rocket, and questions of carrier rocket development.

Spectrum analysis on quality requirements consideration in software design documents.

PubMed

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine Applications: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Hasan, Iftekhar; Sozer, Yilmaz

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic andmore » changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.« less

Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Hasan, Iftekhar; Sozer, Yilmaz

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic andmore » changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.« less

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

Instructional Design Considerations in Converting Non-CBT Materials into CBT Courses.

ERIC Educational Resources Information Center

Ng, Raymond

Instructional designers who are asked to convert existing training materials into computer-based training (CBT) must take special precautions to avoid making the product into a sophisticated page turner. Although conversion may save considerable time on subject research and analysis, courses to be delivered through microcomputers may require…

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Alternate design considerations. 116.340 Section 116.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS CONSTRUCTION AND ARRANGEMENT Hull Structure § 116.340 Alternate...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Alternate design considerations. 116.340 Section 116.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS CONSTRUCTION AND ARRANGEMENT Hull Structure § 116.340 Alternate...

Human factors considerations in the design and evaluation of electronic flight bags (EFBs) : version 2

DOT National Transportation Integrated Search

2003-09-01

Electronic Flight Bags (EFBs) are coming into the flight deck, bringing along with them a wide range of human factors considerations. In order to understand and assess the full impact of an EFB, designers and evaluators require an understanding of ho...

Human factors considerations in the design and evaluation of electronic flight bags (EFBs), version 1 : basic functions

DOT National Transportation Integrated Search

2003-09-01

Electronic Flight Bags (EFBs) are coming into the flight deck, bringing along with them a wide range of human factors considerations. In order to understand and assess the full impact of an EFB, designers and evaluators require an understanding of ho...

Creating restorative settings: inclusive design considerations

Treesearch

David Kamp

2009-01-01

One of 18 articles inspired by the Meristem 2007 Forum, "Restorative Commons for Community Health." The articles include interviews, case studies, thought pieces, and interdisciplinary theoretical works that explore the relationship between human health and the urban...

An improved design of electrodes for measurement of streaming potentials on wet bone in vitro and in vivo.

PubMed

Cochran, G V; Dell, D G; Palmieri, V R; Johnson, M W; Otter, M W; Kadaba, M P

1989-01-01

Streaming potentials are generated by mechanical stress in wet bone and may constitute a control mechanism for bone remodeling. Measurement of streaming potentials in bone has attracted considerable effort in past years but quantitative studies have been hampered by relatively poor repeatability when using Ag.AgCl electrodes which contact bone via a wick moistened with electrolyte. Improvement now has been achieved with an electrode design that limits the specific area of contact of an agar/salt bridge by means of a silastic seal, thus permitting the same equipotential surface to be contacted for each set of measurements. This reduces variations caused by bone structure and impedance, and facilitates quantitative comparisons of the response of bone samples to selected variables. The new design also permits considerable qualitative improvement in recordings made from bone during locomotor function in experimental animals in vivo.

Clinical Trials Targeting Aging and Age-Related Multimorbidity

PubMed Central

Crimmins, Eileen M; Grossardt, Brandon R; Crandall, Jill P; Gelfond, Jonathan A L; Harris, Tamara B; Kritchevsky, Stephen B; Manson, JoAnn E; Robinson, Jennifer G; Rocca, Walter A; Temprosa, Marinella; Thomas, Fridtjof; Wallace, Robert; Barzilai, Nir

2017-01-01

Abstract Background There is growing interest in identifying interventions that may increase health span by targeting biological processes underlying aging. The design of efficient and rigorous clinical trials to assess these interventions requires careful consideration of eligibility criteria, outcomes, sample size, and monitoring plans. Methods Experienced geriatrics researchers and clinical trialists collaborated to provide advice on clinical trial design. Results Outcomes based on the accumulation and incidence of age-related chronic diseases are attractive for clinical trials targeting aging. Accumulation and incidence rates of multimorbidity outcomes were developed by selecting at-risk subsets of individuals from three large cohort studies of older individuals. These provide representative benchmark data for decisions on eligibility, duration, and assessment protocols. Monitoring rules should be sensitive to targeting aging-related, rather than disease-specific, outcomes. Conclusions Clinical trials targeting aging are feasible, but require careful design consideration and monitoring rules. PMID:28364543

Performance of Axial-Flow Supersonic Compressor of XJ55-FF-1 Turbojet Engine. III; Over-All Performance of Compressor

NASA Technical Reports Server (NTRS)

Hartmann, Melvin J.; Tysl, Edward R.

1949-01-01

An investigation was conducted to determine the performance characteristics of the rotor and inlet guide vanes used in the axial-flow supersonic compressor of the XJ55-FF-1 turbojet engine. Outlet stators used in the engine were omitted to facilitate study of the supersonic rotor. The extent of the deviation from design performance indicates that the design-shock configuration was not obtained. A maximum pressure ratio of 2.26 was obtained at an equivalent tip speed of 1614 feet per second and an adiabatic efficiency of 0.61. The maximum efficiency obtained was 0.79 at an equivalent tip speed of 801 feet per second and a pressure ratio of 1.29. The performance obtained was considerably below design performance. The effective aerodynamic forces encountered appeared to be large enough to cause considerable damage to the thin aluminum leading edges of the rotor blades.

High-speed, automatic controller design considerations for integrating array processor, multi-microprocessor, and host computer system architectures

NASA Technical Reports Server (NTRS)

Jacklin, S. A.; Leyland, J. A.; Warmbrodt, W.

1985-01-01

Modern control systems must typically perform real-time identification and control, as well as coordinate a host of other activities related to user interaction, online graphics, and file management. This paper discusses five global design considerations which are useful to integrate array processor, multimicroprocessor, and host computer system architectures into versatile, high-speed controllers. Such controllers are capable of very high control throughput, and can maintain constant interaction with the nonreal-time or user environment. As an application example, the architecture of a high-speed, closed-loop controller used to actively control helicopter vibration is briefly discussed. Although this system has been designed for use as the controller for real-time rotorcraft dynamics and control studies in a wind tunnel environment, the controller architecture can generally be applied to a wide range of automatic control applications.

Choosing between responsive-design websites versus mobile apps for your mobile behavioral intervention: presenting four case studies.

PubMed

Turner-McGrievy, Gabrielle M; Hales, Sarah B; Schoffman, Danielle E; Valafar, Homay; Brazendale, Keith; Weaver, R Glenn; Beets, Michael W; Wirth, Michael D; Shivappa, Nitin; Mandes, Trisha; Hébert, James R; Wilcox, Sara; Hester, Andrew; McGrievy, Matthew J

2017-06-01

Both mobile apps and responsive-design websites (web apps) can be used to deliver mobile health (mHealth) interventions, but it can be difficult to discern which to use in research. The goal of this paper is to present four case studies from behavioral interventions that developed either a mobile app or a web app for research and present an information table to help researchers determine which mobile option would work best for them. Four behavioral intervention case studies (two developed a mobile app, and two developed a web app) presented include time, cost, and expertise. Considerations for adopting a mobile app or a web app-such as time, cost, access to programmers, data collection, security needs, and intervention components- are presented. Future studies will likely integrate both mobile app and web app modalities. The considerations presented here can help guide researchers on which platforms to choose prior to starting an mHealth intervention.

Factors influencing confidential unit exclusions in blood donors.

PubMed

Sümnig, A; Konerding, U; Kohlmann, T; Greinacher, A

2010-04-01

In many countries blood donors can exclude their donated blood from being transfused in a confidential unit exclusion (CUE) process. We aimed to identify characteristics which might influence the decision for CUE. In a 3-step approach we first enrolled 29 German blood donation centers in 2005 and addressed how the clarity of different CUE forms applied in these centers was rated by first time blood donors and also assessed three newly designed CUE forms. Second, we performed a survey on the characteristics of the CUE process including 25 centers. Third, we performed an intervention study, in which the CUE form originally applied in the study centre was compared with a newly developed CUE form in a before-after study design with respect to the corresponding CUE rates. (1) Clarity of the CUE forms varied considerably. (2) The CUE rate was higher (P < 0.05) when nurses rather than a physician were involved in informing the donors and when the CUE form was submitted anonymously instead of being handed to a person. (3) Application of the newly designed CUE form which was rated as being very clear resulted in a 31% decrease in the CUE rate. Design of the CUE form and characteristics of the CUE process may considerably influence the CUE rates.

76 FR 55732 - Public Listening Sessions Regarding the Maritime Administration's Panama Canal Expansion Study...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-08

... infrastructure. The study is being conducted in four defined phases that are designed to present considerations... interpreter may submit their request at the time of registration at http://www.PanamaCanalStudy.com... Maritime Administration's Panama Canal Expansion Study and the America's Marine Highway Program AGENCY...

Design and market considerations for axial flux superconducting electric machine design

NASA Astrophysics Data System (ADS)

Ainslie, M. D.; George, A.; Shaw, R.; Dawson, L.; Winfield, A.; Steketee, M.; Stockley, S.

2014-05-01

In this paper, the authors investigate a number of design and market considerations for an axial flux superconducting electric machine design that uses high temperature superconductors. The axial flux machine design is assumed to utilise high temperature superconductors in both wire (stator winding) and bulk (rotor field) forms, to operate over a temperature range of 65-77 K, and to have a power output in the range from 10s of kW up to 1 MW (typical for axial flux machines), with approximately 2-3 T as the peak trapped field in the bulk superconductors. The authors firstly investigate the applicability of this type of machine as a generator in small- and medium-sized wind turbines, including the current and forecasted market and pricing for conventional turbines. Next, a study is also carried out on the machine's applicability as an in-wheel hub motor for electric vehicles. Some recommendations for future applications are made based on the outcome of these two studies. Finally, the cost of YBCO-based superconducting (2G HTS) wire is analysed with respect to competing wire technologies and compared with current conventional material costs and current wire costs for both 1G and 2G HTS are still too great to be economically feasible for such superconducting devices.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

PubMed

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

Adapting a Multiple-Baseline Design Rationale for Evaluating Instructional Interventions: Implications for the Adoption of Direct Instruction Reading Curricula for Evidence-Based Reform

ERIC Educational Resources Information Center

Vitale, Michael R.; Kaniuka, Theodore S.

2012-01-01

Present national methodological standards for evaluating the credibility of the design of individual research studies have resulted in findings reporting the pre-­post effectiveness of Direct Instruction programs to be eliminated from consideration by educational leaders involved in making curricular decisions intended to advance local school…

EoC Study Update to Examine the Cost, Schedule and Technical Changes to NASA Projects

NASA Technical Reports Server (NTRS)

Bitten, Bob; Emmons, Debra; Shinn, Stephen; Scolese, Chris

2018-01-01

The original National Aeronautics and Space Administration (NASA) Explanation of Change (EoC) study was conducted in 2010 to understand the underlying causes of cost and schedule growth. The first study consisted of 25 missions launched from 2000 to 2010 and looked at the events that led to growth. These events were categorized into different bins that were rolled up to quantify whether the growth was due to internal planning, or internal execution, or from external forces and found that the growth was evenly distributed among those three categories. The result of the study presented nine considerations focused at reducing growth due to project external events and internal planning events. Although no one 'magic bullet' consideration was discovered in the previous work, the nine considerations taken as a whole were postulated to help reduce cost and schedule change in future NASA missions. A recent update was conducted that included investigating 8 missions developed since the previous study to determine if the results were different. Cost, schedule, and mass increases were analyzed from the start of Phase B through Preliminary Design Review and Critical Design Review to Launch. As shown in this paper, the results are better with overall cost and schedule growth being reduced. The paper will show a comparison of the previous results to the updated results to show specific reductions and provide an explanation of which recommendations were followed.

Robotic Observatory System Design-Specification Considerations for Achieving Long-Term Sustainable Precision Performance

NASA Astrophysics Data System (ADS)

Wray, J. D.

2003-05-01

The robotic observatory telescope must point precisely on the target object, and then track autonomously to a fraction of the FWHM of the system PSF for durations of ten to twenty minutes or more. It must retain this precision while continuing to function at rates approaching thousands of observations per night for all its years of useful life. These stringent requirements raise new challenges unique to robotic telescope systems design. Critical design considerations are driven by the applicability of the above requirements to all systems of the robotic observatory, including telescope and instrument systems, telescope-dome enclosure systems, combined electrical and electronics systems, environmental (e.g. seeing) control systems and integrated computer control software systems. Traditional telescope design considerations include the effects of differential thermal strain, elastic flexure, plastic flexure and slack or backlash with respect to focal stability, optical alignment and angular pointing and tracking precision. Robotic observatory design must holistically encapsulate these traditional considerations within the overall objective of maximized long-term sustainable precision performance. This overall objective is accomplished through combining appropriate mechanical and dynamical system characteristics with a full-time real-time telescope mount model feedback computer control system. Important design considerations include: identifying and reducing quasi-zero-backlash; increasing size to increase precision; directly encoding axis shaft rotation; pointing and tracking operation via real-time feedback between precision mount model and axis mounted encoders; use of monolithic construction whenever appropriate for sustainable mechanical integrity; accelerating dome motion to eliminate repetitive shock; ducting internal telescope air to outside dome; and the principal design criteria: maximizing elastic repeatability while minimizing slack, plastic deformation and hysteresis to facilitate long-term repeatably precise pointing and tracking performance.

High-Payoff Space Transportation Design Approach with a Technology Integration Strategy

NASA Technical Reports Server (NTRS)

McCleskey, C. M.; Rhodes, R. E.; Chen, T.; Robinson, J.

2011-01-01

A general architectural design sequence is described to create a highly efficient, operable, and supportable design that achieves an affordable, repeatable, and sustainable transportation function. The paper covers the following aspects of this approach in more detail: (1) vehicle architectural concept considerations (including important strategies for greater reusability); (2) vehicle element propulsion system packaging considerations; (3) vehicle element functional definition; (4) external ground servicing and access considerations; and, (5) simplified guidance, navigation, flight control and avionics communications considerations. Additionally, a technology integration strategy is forwarded that includes: (a) ground and flight test prior to production commitments; (b) parallel stage propellant storage, such as concentric-nested tanks; (c) high thrust, LOX-rich, LOX-cooled first stage earth-to-orbit main engine; (d) non-toxic, day-of-launch-loaded propellants for upper stages and in-space propulsion; (e) electric propulsion and aero stage control.

A review of mammalian carcinogenicity study design and potential effects of alternate test procedures on the safety evaluation of food ingredients.

PubMed

Hayes, A W; Dayan, A D; Hall, W C; Kodell, R L; Williams, G M; Waddell, W D; Slesinski, R S; Kruger, C L

2011-06-01

Extensive experience in conducting long term cancer bioassays has been gained over the past 50 years of animal testing on drugs, pesticides, industrial chemicals, food additives and consumer products. Testing protocols for the conduct of carcinogenicity studies in rodents have been developed in Guidelines promulgated by regulatory agencies, including the US EPA (Environmental Protection Agency), the US FDA (Food and Drug Administration), the OECD (Organization for Economic Co-operation and Development) for the EU member states and the MAFF (Ministries of Agriculture, Forestries and Fisheries) and MHW (Ministry of Health and Welfare) in Japan. The basis of critical elements of the study design that lead to an accepted identification of the carcinogenic hazard of substances in food and beverages is the focus of this review. The approaches used by entities well-known for carcinogenicity testing and/or guideline development are discussed. Particular focus is placed on comparison of testing programs used by the US National Toxicology Program (NTP) and advocated in OECD guidelines to the testing programs of the European Ramazzini Foundation (ERF), an organization with numerous published carcinogenicity studies. This focus allows for a good comparison of differences in approaches to carcinogenicity testing and allows for a critical consideration of elements important to appropriate carcinogenicity study designs and practices. OECD protocols serve as good standard models for carcinogenicity testing protocol design. Additionally, the detailed design of any protocol should include attention to the rationale for inclusion of particular elements, including the impact of those elements on study interpretations. Appropriate interpretation of study results is dependent on rigorous evaluation of the study design and conduct, including differences from standard practices. Important considerations are differences in the strain of animal used, diet and housing practices, rigorousness of test procedures, dose selection, histopathology procedures, application of historical control data, statistical evaluations and whether statistical extrapolations are supported by, or are beyond the limits of, the data generated. Without due consideration, there can be result conflicting data interpretations and uncertainty about the relevance of a study's results to human risk. This paper discusses the critical elements of rodent (rat) carcinogenicity studies, particularly with respect to the study of food ingredients. It also highlights study practices and procedures that can detract from the appropriate evaluation of human relevance of results, indicating the importance of adherence to international consensus protocols, such as those detailed by OECD. Copyright © 2010. Published by Elsevier Inc.

Maintenance of Blinding in Clinical Trials and the Implications for Studying Analgesia Using Cannabinoids

PubMed Central

Wilsey, Barth; Deutsch, Reena; Marcotte, Thomas D.

2016-01-01

Abstract The design of analgesic clinical trials invariably involves a comparison between placebo and active study medication. An assumption is made that treatment effects can be approximated by subtracting the response to placebo from that attained with the use of active study medication. However, the psychoactivity of cannabinoids may unmask their presence and lead to an expectation and/or conditioning of pain relief. For example, study participants biased toward the belief that cannabis is beneficial for their condition might be more inclined to report positive effects if they were to accurately identify the active treatment because of its psychoactivity. This may lead to incorrect assumptions regarding the efficacy of a cannabinoid. Methodologies designed to counteract unmasking need to be implemented in the design phase of a study. During the clinical trial, it is also important to query participants as to which treatment they believe they have received. Blinding can be considered to be preserved when the accuracy of treatment guesses is not considerably different than random guessing, which is estimated to be correct 50% of the time. After a study has been completed, the use of statistical methodologies such as regression and mediation analysis are worthy of consideration to see whether psychoactive effects biased the results. PMID:28861490

Design Considerations in Development of a Mobile Health Intervention Program: The TEXT ME and TEXTMEDS Experience

PubMed Central

Thakkar, Jay; Barry, Tony; Thiagalingam, Aravinda; Redfern, Julie; McEwan, Alistair L; Rodgers, Anthony

2016-01-01

Background Mobile health (mHealth) has huge potential to deliver preventative health services. However, there is paucity of literature on theoretical constructs, technical, practical, and regulatory considerations that enable delivery of such services. Objectives The objective of this study was to outline the key considerations in the development of a text message-based mHealth program; thus providing broad recommendations and guidance to future researchers designing similar programs. Methods We describe the key considerations in designing the intervention with respect to functionality, technical infrastructure, data management, software components, regulatory requirements, and operationalization. We also illustrate some of the potential issues and decision points utilizing our experience of developing text message (short message service, SMS) management systems to support 2 large randomized controlled trials: TEXT messages to improve MEDication adherence & Secondary prevention (TEXTMEDS) and Tobacco, EXercise and dieT MEssages (TEXT ME). Results The steps identified in the development process were: (1) background research and development of the text message bank based on scientific evidence and disease-specific guidelines, (2) pilot testing with target audience and incorporating feedback, (3) software-hardware customization to enable delivery of complex personalized programs using prespecified algorithms, and (4) legal and regulatory considerations. Additional considerations in developing text message management systems include: balancing the use of customized versus preexisting software systems, the level of automation versus need for human inputs, monitoring, ensuring data security, interface flexibility, and the ability for upscaling. Conclusions A merging of expertise in clinical and behavioral sciences, health and research data management systems, software engineering, and mobile phone regulatory requirements is essential to develop a platform to deliver and manage support programs to hundreds of participants simultaneously as in TEXT ME and TEXTMEDS trials. This research provides broad principles that may assist other researchers in developing mHealth programs. PMID:27847350

Design Considerations in Development of a Mobile Health Intervention Program: The TEXT ME and TEXTMEDS Experience.

PubMed

Thakkar, Jay; Barry, Tony; Thiagalingam, Aravinda; Redfern, Julie; McEwan, Alistair L; Rodgers, Anthony; Chow, Clara K

2016-11-15

Mobile health (mHealth) has huge potential to deliver preventative health services. However, there is paucity of literature on theoretical constructs, technical, practical, and regulatory considerations that enable delivery of such services. The objective of this study was to outline the key considerations in the development of a text message-based mHealth program; thus providing broad recommendations and guidance to future researchers designing similar programs. We describe the key considerations in designing the intervention with respect to functionality, technical infrastructure, data management, software components, regulatory requirements, and operationalization. We also illustrate some of the potential issues and decision points utilizing our experience of developing text message (short message service, SMS) management systems to support 2 large randomized controlled trials: TEXT messages to improve MEDication adherence & Secondary prevention (TEXTMEDS) and Tobacco, EXercise and dieT MEssages (TEXT ME). The steps identified in the development process were: (1) background research and development of the text message bank based on scientific evidence and disease-specific guidelines, (2) pilot testing with target audience and incorporating feedback, (3) software-hardware customization to enable delivery of complex personalized programs using prespecified algorithms, and (4) legal and regulatory considerations. Additional considerations in developing text message management systems include: balancing the use of customized versus preexisting software systems, the level of automation versus need for human inputs, monitoring, ensuring data security, interface flexibility, and the ability for upscaling. A merging of expertise in clinical and behavioral sciences, health and research data management systems, software engineering, and mobile phone regulatory requirements is essential to develop a platform to deliver and manage support programs to hundreds of participants simultaneously as in TEXT ME and TEXTMEDS trials. This research provides broad principles that may assist other researchers in developing mHealth programs. ©Jay Thakkar, Tony Barry, Aravinda Thiagalingam, Julie Redfern, Alistair L McEwan, Anthony Rodgers, Clara K Chow. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 15.11.2016.

Design Considerations of a Solid State Thermal Energy Storage

NASA Astrophysics Data System (ADS)

Janbozorgi, Mohammad; Houssainy, Sammy; Thacker, Ariana; Ip, Peggy; Ismail, Walid; Kavehpour, Pirouz

2016-11-01

With the growing governmental restrictions on carbon emission, renewable energies are becoming more prevalent. A reliable use of a renewable source however requires a built-in storage to overcome the inherent intermittent nature of the available energy. Thermal design of a solid state energy storage has been investigated for optimal performance. The impact of flow regime, laminar vs. turbulent, on the design and sizing of the system is also studied. The implications of low thermal conductivity of the storage material are discussed and a design that maximizes the round trip efficiency is presented. This study was supported by Award No. EPC-14-027 Granted by California Energy Commission (CEC).

Electromagnetic Design of a Radiofrequency Cavity

NASA Astrophysics Data System (ADS)

Montoya Soto, G. R.; Duarte Galvan, Carlos; Monzon, Ildefonso Leon; Podesta Lerma, Pedro Luis manuel; Valerio-Lizarraga, C. A.

2017-10-01

Electromagnetic and mechanical studies have been performed with the aim of build a RF cavity in the S-Band (2998 MHz), the design takes into consideration the relativistic change in the electron velocity through the acceleration cavity. Four cavity cases were considered at different input energies, 50 KeV, 100 KeV, 150 KeV, with output energies of 350 KeV, the designs show good acceleration efficiency and beam coherence comparable to the one created in the cathode.

Artificial gravity studies and design considerations for Space Station centrifuges

NASA Technical Reports Server (NTRS)

Halstead, T. W.; Brown, A. H.; Fuller, C. A.; Oyama, J.

1984-01-01

The requirements to and capabilities of a Space Station biological facility centrifuge are discussed on the basis of an assessment of the objectives and subjects of future microgravity biological experiments. It is argued that the facility should be capable of both acute and extended chronic exposure of test subjects and biological materials to altered-g loading. In addition, the experimental approaches and equipment for microgravity studies on a Space Station are outlined. Finally, the engineering requirements of such a centrifuge are examined, with consideration of radial gravity gradients, size, and physical access to animals.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 4: IPAD system design

NASA Technical Reports Server (NTRS)

Goldfarb, W.; Carpenter, L. C.; Redhed, D. D.; Hansen, S. D.; Anderson, L. O.; Kawaguchi, A. S.

1973-01-01

The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.

REPRODUCTIVE AND DEVELOPMENTAL TOXICITY ASSOCIATED WITH DISINFECTION BY-PRODUCTS OF DRINKING WATER

EPA Science Inventory

Over the past decade many toxicologic studies have addressed the potential for disinfection byproducts of drinking water to elicit alterations on the reproductive system and fetal development.
The types and designs of these studies vary considerably, but in general they can ...

Geothermal application feasibility study for the New Mexico State University campus. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gunaji, N.N.; Thode, E.F.; Chaturvedi, L.

1978-12-01

The following are covered: a geothermal prospect conceptual study for NMSU campus, geothermal resources on and near NMSU land, present campus heating and cooling system, conceptual design and preliminary cost estimates - alternative systems, economic analysis, and legal and environmental considerations. (MHR)

Manual on uniform traffic control devices for streets and highways

DOT National Transportation Integrated Search

1995-02-01

The fourth working paper in Phase 1 of the Comprehensive Truck Size and Weight Study discusses the technical relationships of policy consequence concerning bridges. It presents information on bridge design considerations, truck characteristics affect...

Locomotive crashworthiness research : locomotive crew egress evaluation

DOT National Transportation Integrated Search

2002-05-01

The objectives of this study include the identification of aspects of locomotive design and operation related to crew egress or access by rescuers in accidents, with the goal of improving crew survivability. This work identifies the considerations an...

Shuttle interaction study extension

NASA Technical Reports Server (NTRS)

1981-01-01

The implications of using the Shuttle with the SOC were analyzed, including constraints that the Shuttle places upon the SOC design. All the considerations involved in the use of the shuttle as a part of the SOC concept were identified.

Ergonomics in an oral pathology laboratory: Back to basics in microscopy

PubMed Central

Sundaragiri, Krishna Sireesha; Shrivastava, Shikha; Sankhla, Bharat; Bhargava, Akshay

2014-01-01

Ergonomics is simply a science focused on “study of work” to reduce fatigue and discomfort through product design. A comprehensive ergonomics program for the pathology laboratory has become necessary to prevent the occurrence of work related musculoskeletal disorders (MSDs) and accidents. Most of the literature on ergonomics involve various web links or occasional studies on the effect of laboratory work and associated MSDs. A Google search was carried out corresponding to the terms “ergonomics”, “pathology laboratory”, “microscope”. All the relevant literature from web sources was sorted out and categorized. In this review, we intend to identify basic anthropometric factors, biomechanical risk factors, laboratory design considerations and specific microscopy-related considerations. The ultimate aim of ergonomics is to provide a safe environment for laboratory personnel to conduct their work and to allow maximum flexibility for safe research use. PMID:25364157

Partners in Care: Design Considerations for Caregivers and Patients During a Hospital Stay

PubMed Central

Miller, Andrew D.; Mishra, Sonali R.; Kendall, Logan; Haldar, Shefali; Pollack, Ari H.; Pratt, Wanda

2016-01-01

Informal caregivers, such as close friends and family, play an important role in a hospital patient’s care. Although CSCW researchers have shown the potential for social computing technologies to help patients and their caregivers manage chronic conditions and support health behavior change, few studies focus on caregivers’ role during a multi-day hospital stay. To explore this space, we conducted an interview and observation study of patients and caregivers in the inpatient setting. In this paper, we describe how caregivers and patients coordinate and collaborate to manage patients’ care and wellbeing during a hospital stay. We define and describe five roles caregivers adopt: companion, assistant, representative, navigator, and planner, and show how patients and caregivers negotiate these roles and responsibilities throughout a hospital stay. Finally, we identify key design considerations for technology to support patients and caregivers during a hospital stay. PMID:27148596

Establishing Correlates of Protection for Vaccine Development: Considerations for the Respiratory Syncytial Virus Vaccine Field.

PubMed

Kulkarni, Prasad S; Hurwitz, Julia L; Simões, Eric A F; Piedra, Pedro A

2018-03-01

Correlates of protection (CoPs) can play a significant role in vaccine development by assisting the selection of vaccine candidates for clinical trials, supporting clinical trial design and implementation, and simplifying tests of vaccine modifications. Because of this important role in vaccine development, it is essential that CoPs be defined by well-designed immunogenicity and efficacy studies, with attention paid to benefits and limitations. The respiratory syncytial virus (RSV) field is unique in that a great deal of information about the humoral response is available from basic research and clinical studies. Polyclonal and monoclonal antibodies have been used routinely in the clinic to protect vulnerable infants from infection, providing a wealth of information about correlations between neutralizing antibodies and disease prevention. Considerations for the establishment of future CoPs to support RSV vaccine development in different populations are therefore discussed.

Mitigating shear lag in tall buildings

NASA Astrophysics Data System (ADS)

Gaur, Himanshu; Goliya, Ravindra K.

2015-09-01

As the height of building increases, effect of shear lag also becomes considerable in the design of high-rise buildings. In this paper, shear lag effect in tall buildings of heights, i.e., 120, 96, 72, 48 and 36 stories of which aspect ratio ranges from 3 to 10 is studied. Tube-in-tube structural system with façade bracing is used for designing the building of height 120 story. It is found that bracing system considerably reduces the shear lag effect and hence increases the building stiffness to withstand lateral loads. Different geometric patterns of bracing system are considered. The best effective geometric configuration of bracing system is concluded in this study. Lateral force, as wind load is applied on the buildings as it is the most dominating lateral force for such heights. Wind load is set as per Indian standard code of practice IS 875 Part-3. For analysis purpose SAP 2000 software program is used.

Structural considerations in design of lightweight glass-fiber composite pressure vessels

NASA Technical Reports Server (NTRS)

Faddoul, J. R.

1973-01-01

The development of structurally efficient, metal-lined, glass-fiber composite pressure vessels. Both the current state-of-the-art and current problems are discussed along with fracture mechanics considerations for the metal liner. The design concepts used for metal-lined, glass-fiber, composite pressure vessels are described and the structural characteristics of the composite designs are compared with each other and with homogeneous metal pressure vessels. Specific design techniques and available design data are identified. Results of a current program to evaluate flaw growth and fracture characteristics of the metal liners are reviewed and the impact of these results on composite pressure vessel designs is discussed.

Use of geothermal energy for desalination in New Mexico: a feasibility study. Final report, January 1, 1977-May 30, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chaturvedi, L.; Keyes, C.G. Jr.; Swanberg, C.A.

The water requirements and availability for New Mexico are described. The possibility of using geothermal resources for desalination of the state's saline water sources is discussed. The following aspects of the problem are covered: resource evaluation, geothermal desalination technology, potential geothermal desalination sites, saline and geothermal aquifer well fields design, geothermal desalination plant waste brine disposal, process water pumping and brine disposal unit costs, environmental considerations, and legal and institutional considerations. (MHR)

78 FR 69690 - Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... and Gene Therapy Products; Extension of Comment Period AGENCY: Food and Drug Administration, HHS...: Considerations for the Design of Early-Phase Clinical Trials of Cellular and Gene Therapy Products'' that... sponsors of Investigational New Drug Applications for cellular therapy (CT) and gene therapy (GT) products...

Conceptual design studies for surface infrastructure

NASA Technical Reports Server (NTRS)

Bufkin, Ann L.; Jones, William R., II

1986-01-01

The utimate design of a manned Mars base will be the result of considerable engineering analysis and many trade studies to optimize the configuration. Many options and scenarios are available and all need to be considered at this time. Initial base elements, two base configuration concepts, internal space architectural concerns, and two base set-up scenarios are discussed. There are many variables as well as many unknowns to be reckoned with before people set foot on the red planet.

Considerations for test design to accommodate energy-budget models in ecotoxicology: a case study for acetone in the pond snail Lymnaea stagnalis.

PubMed

Barsi, Alpar; Jager, Tjalling; Collinet, Marc; Lagadic, Laurent; Ducrot, Virginie

2014-07-01

Toxicokinetic-toxicodynamic (TKTD) modeling offers many advantages in the analysis of ecotoxicity test data. Calibration of TKTD models, however, places different demands on test design compared with classical concentration-response approaches. In the present study, useful complementary information is provided regarding test design for TKTD modeling. A case study is presented for the pond snail Lymnaea stagnalis exposed to the narcotic compound acetone, in which the data on all endpoints were analyzed together using a relatively simple TKTD model called DEBkiss. Furthermore, the influence of the data used for calibration on accuracy and precision of model parameters is discussed. The DEBkiss model described toxic effects on survival, growth, and reproduction over time well, within a single integrated analysis. Regarding the parameter estimates (e.g., no-effect concentration), precision rather than accuracy was affected depending on which data set was used for model calibration. In addition, the present study shows that the intrinsic sensitivity of snails to acetone stays the same across different life stages, including the embryonic stage. In fact, the data on egg development allowed for selection of a unique metabolic mode of action for the toxicant. Practical and theoretical considerations for test design to accommodate TKTD modeling are discussed in the hope that this information will aid other researchers to make the best possible use of their test animals. © 2014 SETAC.

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 3A. GSFLS technical analysis (appendix). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriger, A.

1978-01-31

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. The technical and financial considerations underlying a global spent fuel logistics systems have been studied and are reported. The Pacific Basin is used as a model throughout this report; however the stated methodology and, in many cases, considerations and conclusions are applicable to other global regions. Spent fuel discharge profiles for Pacific Basin Countries were used to determine the technical systems requirements for alternative concepts. Functional analyses and flows were generated to define both system design requirements and logistics parameters. Amore » technology review was made to ascertain the state-of-the-art of relevant GSFLS technical systems. Modular GSFLS facility designs were developed using the information generated from the functional analysis and technology review. The modular facility designs were used as a basis for siting and cost estimates for various GSFLS alternatives. Various GSFLS concepts were analyzed from a financial and economic perspective in order to provide total concepts costs and ascertain financial and economic sensitivities to key GSFLS variations. Results of the study include quantification of GSFLS facility and hardware requirements; drawings of relevant GSFLS facility designs; system cost estimates; financial reports - including user service charges; and comparative analyses of various GSFLS alternatives.« less

Performance Analysis of Cofiring Densified Refuse Derived Fuel in a Military Boiler.

DTIC Science & Technology

1981-12-01

Derived Fuel 70 Design Considerations for Municipal Solid Waste Conveyors 71 Densification of Refuse -Derived Fuels: Preparation Properties and Systems...problems could be realized if the system were expanded and if operating demands were increased. 70 DESIGN CONSIDERATIONS FOR MUNICIPAL SOLID WASTE CONVEYORS ...cleanup might be very useful in order to determine the level at which a conveyor design is monetarily accep~table. A scan of conveying technologies for

[Causal relationship between assertiveness and adjustment in children: A short-term longitudinal study].

PubMed

Eguchi, Megumi; Hamaguchi, Yoshikazu

2015-08-01

This study examined the causal relationships between assertiveness and both internal and external adjustment in children. Elementary school children in grades four through six (N = 284) participated in the study, which used a short-term longitudinal design. The children completed questionnaires twice during a 6-months period. They responded to assertiveness questionnaires that included two components: "self-expression" and "consideration of others". They also completed a self-esteem scale as an index of internal adjustment, and the Class Life Satisfaction scale as an index of external adjustment. There was a positive causative relationship between "self-expression" and internal adjustment and between "consideration for others" and external adjustment. In addition, the effects on adjustment varied according to the type of assertiveness. Cluster analysis and MANOVA indicated that the group with high "self-expression" and "consideration for others" had high internal and external adjustment, while the children with poor assertiveness showed the lowest degree of adaptivity.

Considerations for the design, analysis and presentation of in vivo studies.

PubMed

Ranstam, J; Cook, J A

2017-03-01

To describe, explain and give practical suggestions regarding important principles and key methodological challenges in the study design, statistical analysis, and reporting of results from in vivo studies. Pre-specifying endpoints and analysis, recognizing the common underlying assumption of statistically independent observations, performing sample size calculations, and addressing multiplicity issues are important parts of an in vivo study. A clear reporting of results and informative graphical presentations of data are other important parts. Copyright © 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Optical System Design for the Next Generation Space Telescope

NASA Technical Reports Server (NTRS)

Solomon, Leonard H. (Principal Investigator); Kahan, Mark A.

1996-01-01

This report provides considerations and suggested approaches for design of the Optical Telescope Assembly and the segmented primary mirror of a Next Generation Space Telescope (NGST). Based on prior studies and hardware development, we provide data and design information on low-risk materials and hardware configurations most likely to meet low weight, low temperature and long-life requirements of the nominal 8-meter aperture NGST. We also provide preliminary data for cost and performance trades, and recommendations for technology development and demonstration required to support the system design effort.

Exposure assessment for endocrine disruptors: some considerations in the design of studies.

PubMed Central

Rice, Carol; Birnbaum, Linda S; Cogliano, James; Mahaffey, Kathryn; Needham, Larry; Rogan, Walter J; vom Saal, Frederick S

2003-01-01

In studies designed to evaluate exposure-response relationships in children's development from conception through puberty, multiple factors that affect the generation of meaningful exposure metrics must be considered. These factors include multiple routes of exposure; the timing, frequency, and duration of exposure; need for qualitative and quantitative data; sample collection and storage protocols; and the selection and documentation of analytic methods. The methods for exposure data collection and analysis must be sufficiently robust to accommodate the a priori hypotheses to be tested, as well as hypotheses generated from the data. A number of issues that must be considered in study design are summarized here. PMID:14527851

Apollo CSM Power Generation System Design Considerations, Failure Modes and Lessons Learned

NASA Technical Reports Server (NTRS)

Interbartolo, Michael

2009-01-01

The objectives of this slide presentation are to: review the basic design criteria for fuel cells (FC's), review design considerations during developmental phase that affected Block I and Block II vehicles, summarize the conditions that led to the failure of components in the FC's, and state the solution implemented for each failure. It reviews the location of the fuel cells, the fuel cell theory the design criteria going into development phase and coming from the development phase, failures and solutions of Block I and II, and the lessons learned.

Planning for Long-Term Follow-Up: Strategies Learned from Longitudinal Studies.

PubMed

Hill, Karl G; Woodward, Danielle; Woelfel, Tiffany; Hawkins, J David; Green, Sara

2016-10-01

Preventive interventions are often designed and tested with the immediate program period in mind, and little thought that the intervention sample might be followed up for years or even decades beyond the initial trial. However, depending on the type of intervention and the nature of the outcomes, long-term follow-up may well be appropriate. The advantages of long-term follow-up of preventive interventions are discussed and include the capacity to examine program effects across multiple later life outcomes, the ability to examine the etiological processes involved in the development of the outcomes of interest, and the ability to provide more concrete estimates of the relative benefits and costs of an intervention. In addition, researchers have identified potential methodological risks of long-term follow-up such as inflation of type 1 error through post hoc selection of outcomes, selection bias, and problems stemming from attrition over time. The present paper presents a set of seven recommendations for the design or evaluation of studies for potential long-term follow-up organized under four areas: Intervention Logic Model, Developmental Theory and Measurement Issues; Design for Retention; Dealing with Missing Data; and Unique Considerations for Intervention Studies. These recommendations include conceptual considerations in the design of a study, pragmatic concerns in the design and implementation of the data collection for long-term follow-up, as well as criteria to be considered for the evaluation of an existing intervention for potential for long-term follow-up. Concrete examples from existing intervention studies that have been followed up over the long term are provided.

Planning for Long-Term Follow-up: Strategies Learned from Longitudinal Studies

PubMed Central

Hill, Karl G.; Woodward, Danielle; Woelfel, Tiffany; Hawkins, J. David; Green, Sara

2017-01-01

Preventive interventions are often designed and tested with the immediate program period in mind, and little thought that the intervention sample might be followed up for years, or even decades beyond the initial trial. However, depending on the type of intervention and the nature of the outcomes, long-term follow-up may well be appropriate. The advantages of long-term follow-up of preventive interventions are discussed, and include the capacity to examine program effects across multiple later life outcomes, the ability to examine the etiological processes involved in the development of the outcomes of interest and the ability to provide more concrete estimates of the relative benefits and costs of an intervention. In addition, researchers have identified potential methodological risks of long-term follow-up such as inflation of type 1 error through post-hoc selection of outcomes, selection bias and problems stemming from attrition over time. The present paper presents a set of seven recommendations for the design or evaluation of studies for potential long-term follow-up organized under four areas: Intervention Logic Model, Developmental Theory and Measurement Issues; Design for Retention; Dealing with Missing Data; and Unique Considerations for Intervention Studies. These recommendations include conceptual considerations in the design of a study, pragmatic concerns in the design and implementation of the data collection for long-term follow-up, as well as criteria to be considered for the evaluation of an existing intervention for potential for long-term follow-up. Concrete examples from existing intervention studies that have been followed up over the long-term are provided. PMID:26453453

Adaptive design clinical trials: a review of the literature and ClinicalTrials.gov

PubMed Central

Bothwell, Laura E; Avorn, Jerry; Khan, Nazleen F; Kesselheim, Aaron S

2018-01-01

Objectives This review investigates characteristics of implemented adaptive design clinical trials and provides examples of regulatory experience with such trials. Design Review of adaptive design clinical trials in EMBASE, PubMed, Cochrane Registry of Controlled Clinical Trials, Web of Science and ClinicalTrials.gov. Phase I and seamless Phase I/II trials were excluded. Variables extracted from trials included basic study characteristics, adaptive design features, size and use of independent data monitoring committees (DMCs) and blinded interim analyses. We also examined use of the adaptive trials in new drug submissions to the Food and Drug Administration (FDA) and European Medicines Agency (EMA) and recorded regulators’ experiences with adaptive designs. Results 142 studies met inclusion criteria. There has been a recent growth in publicly reported use of adaptive designs among researchers around the world. The most frequently appearing types of adaptations were seamless Phase II/III (57%), group sequential (21%), biomarker adaptive (20%), and adaptive dose-finding designs (16%). About one-third (32%) of trials reported an independent DMC, while 6% reported blinded interim analysis. We found that 9% of adaptive trials were used for FDA product approval consideration, and 12% were used for EMA product approval consideration. International regulators had mixed experiences with adaptive trials. Many product applications with adaptive trials had extensive correspondence between drug sponsors and regulators regarding the adaptive designs, in some cases with regulators requiring revisions or alterations to research designs. Conclusions Wider use of adaptive designs will necessitate new drug application sponsors to engage with regulatory scientists during planning and conduct of the trials. Investigators need to more consistently report protections intended to preserve confidentiality and minimise potential operational bias during interim analysis. PMID:29440155

Design of control-group conditions in clinical trials of behavioral interventions.

PubMed

Lindquist, Ruth; Wyman, Jean F; Talley, Kristine M C; Findorff, Mary J; Gross, Cynthia R

2007-01-01

To review considerations in the design of placebo (attention) control conditions for community-based clinical trials of health behavior change interventions and to provide practical strategies for the design of control conditions. A well-designed control condition is an essential component of a clinical trial to foster the unambiguous interpretation of study findings. Pitfalls in the design of control conditions in clinical trials of behavioral interventions are identified and strategies to address them are offered. Types of control conditions that have been used in fall prevention trials are described, along with their strengths and weaknesses. The control condition used in the recent fall evaluation and prevention program (FEPP) was designed to overcome limitations of previous trial designs; it is provided to illustrate how to apply specific design principles. Pitfalls in the design of behavioral intervention studies may be avoided with the application of sound design principles. The FEPP active control condition can be used as a model in the design of future studies.

EVA Roadmap: New Space Suit for the 21st Century

NASA Technical Reports Server (NTRS)

Yowell, Robert

1998-01-01

New spacesuit design considerations for the extra vehicular activity (EVA) of a manned Martian exploration mission are discussed. Considerations of the design includes:(1) regenerable CO2 removal, (2) a portable life support system (PLSS) which would include cryogenic oxygen produced from in-situ manufacture, (3) a power supply for the EVA, (4) the thermal control systems, (5) systems engineering, (5) space suit systems (materials, and mobility), (6) human considerations, such as improved biomedical sensors and astronaut comfort, (7) displays and controls, and robotic interfaces, such as rovers, and telerobotic commands.

The results of a limited study of approaches to the design, fabrication, and testing of a dynamic model of the NASA IOC space station. Executive summary

NASA Technical Reports Server (NTRS)

Brooks, George W.

1985-01-01

The options for the design, construction, and testing of a dynamic model of the space station were evaluated. Since the definition of the space station structure is still evolving, the Initial Operating Capacity (IOC) reference configuration was used as the general guideline. The results of the studies treat: general considerations of the need for and use of a dynamic model; factors which deal with the model design and construction; and a proposed system for supporting the dynamic model in the planned Large Spacecraft Laboratory.

Contributions to the study of inductive transducers for measuring the amplitude of vibrations in solid media

NASA Technical Reports Server (NTRS)

Dragan, O.; Galan, N.; Sirbu, A.; Ghita, C.

1974-01-01

The design and construction of inductive transducers for measuring the vibrations in metal bars at ultrasonic frequencies are discussed. Illustrations of the inductive transducers are provided. The quantitative relations that are useful in designing the transducers are analyzed. Mathematical models are developed to substantiate the theoretical considerations. Results obtained with laboratory equipment in testing specified metal samples are included.

A study of microwave downcoverters operating in the K sub u band

NASA Technical Reports Server (NTRS)

Fellers, R. G.; Simpson, T. L.; Tseng, B.

1982-01-01

A computer program for parametric amplifier design is developed with special emphasis on practical design considerations for microwave integrated circuit degenerate amplifiers. Precision measurement techniques are developed to obtain a more realistic varactor equivalent circuit. The existing theory of a parametric amplifier is modified to include the equivalent circuit, and microwave properties, such as loss characteristics and circuit discontinuities are investigated.

Tracking and data relay satellite system configuration and tradeoff study, part 1. Volume 1: Summary volume

NASA Technical Reports Server (NTRS)

1972-01-01

Study efforts directed at defining all TDRS system elements are summarized. Emphasis was placed on synthesis of a space segment design optimized to support low and medium data rate user spacecraft and launched with Delta 2914. A preliminary design of the satellite was developed and conceptual designs of the user spacecraft terminal and TDRS ground station were defined. As a result of the analyses and design effort it was determined that (1) a 3-axis-stabilized tracking and data relay satellite launched on a Delta 2914 provides telecommunications services considerably in excess of that required by the study statement; and (2) the design concept supports the needs of the space shuttle and has sufficient growth potential and flexibility to provide telecommunications services to high data rate users. Recommendations for further study are included.

Stainless steel blanket concept for tokamaks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karbowski, J.S.; Lee, A.Y.; Prevenslik, T.V.

1979-01-25

The purpose of this joint ORNL/Westinghouse Program is to develop a design concept for a tokamak reactor blanket system which satisfies engineering requirements for a utility environment. While previous blanket studies have focused primarily on performance issues (thermal, neutronic, and structural), this study has emphasized consideration of reliability, fabricability, and lifetime.

Design issues for evaluating seedling exposure studies.

Treesearch

E. Charles Peterson; A. Robert Mickler

1993-01-01

Tree seedling studies, covering a wide range of experimental conditions in pollutant treatment, species, facilities, and exposure regimes, have become commonplace in forestry research for assessing the actual and potential environmental effects of air pollutants on forest ecosystems. While assuring a wide breadth of scientific information, sufficient consideration has...

Martini Qualitative Research: Shaken, Not Stirred

ERIC Educational Resources Information Center

Nieuwenhuis, F. J.

2015-01-01

Although the number of qualitative research studies has boomed in recent years, close observation reveals that often the research designs and methodological considerations and approaches have developed a type of configuration that does not adhere to purist definitions of the labels attached. Very often so called interpretivist studies are not…

Oral Discourse and Reading Comprehension Abilities of African American School-Age Children

ERIC Educational Resources Information Center

Koonce, Nicole M.

2012-01-01

The reading underachievement of African American (AA) school-age children has received considerable attention in educational circles. Unfortunately, there are relatively few studies designed to uncover the source or sources of these reading achievement differences, especially in children beyond early elementary grades. Some studies suggest that…

The Automobile: A Designer's Dream. Resources in Technology.

ERIC Educational Resources Information Center

Bryson, George Y.; Deal, Walter F., III

1996-01-01

Sketches the history of automobile design, current design considerations, and social/cultural aspects of car design. Provides a design brief that challenges students to develop an electric vehicle. (SK)

Study design considerations in evaluating environmental impacts

Treesearch

Stan T. Lebow; Paul A. Cooper; Patricia Lebow

2006-01-01

The purpose of this chapter is to make the reader aware of how choices in study parameters may influence the outcome of treated-wood environmental impact evaluations. Evaluation of the leaching and environmental accumulation of preservatives from treated wood is a complex process. and many factors can influence the results of such studies. In laboratory studies, the...

The Contribution of Rubrics to the Validity of Performance Assessment: A Study of the Conservation-Restoration and Design Undergraduate Degrees

ERIC Educational Resources Information Center

Menéndez-Varela, José-Luis; Gregori-Giralt, Eva

2016-01-01

Rubrics have attained considerable importance in the authentic and sustainable assessment paradigm; nevertheless, few studies have examined their contribution to validity, especially outside the domain of educational studies. This empirical study used a quantitative approach to analyse the validity of a rubrics-based performance assessment. Raters…

Design Considerations for IAP Charts Approach Course Track and Communication Frequencies

DOT National Transportation Integrated Search

1991-08-01

This report describes two experiments evaluating format changes on instrument approach : plates (IAPs). The study used a simple chart reading task to assess information : transfer in IAPs. : The first experiment addressed different methods of display...

FORMAL SCENARIO DEVELOPMENT FOR ENVIRONMENTAL IMPACT ASSESSMENT STUDIES

EPA Science Inventory

Scenario analysis is a process of evaluating possible future events through the consideration of alternative plausible (though not equally likely) outcomes (scenarios). The analysis is designed to enable improved decision-making and assessment through a more rigorous evaluation o...

Implementation of Testing Equipment for Asphalt Materials : Tech Summary

DOT National Transportation Integrated Search

2009-05-01

Three new automated methods for related asphalt material and mixture testing were evaluated under this study. Each of these devices is designed to reduce testing time considerably and reduce operator error by automating the testing process. The Thery...

Implementation of testing equipment for asphalt materials : tech summary.

DOT National Transportation Integrated Search

2009-05-01

Three new automated methods for related asphalt material and mixture testing were evaluated : under this study. Each of these devices is designed to reduce testing time considerably and reduce : operator error by automating the testing process. The T...

Design considerations for bridge deck joint-sealing systems : summary report.

DOT National Transportation Integrated Search

1992-07-01

This is a report summary which summarizes a three year research effort related to the study of bridge deck expansion joint movements. Bridge deck expansion joint systems often develop serious problems requiring extensive and expensive maintenance. Th...

Relationship between QT Interval Dispersion in acute stroke and stroke prognosis: A Systematic Review

PubMed Central

Lederman, Yitzchok S.; Balucani, Clotilde; Lazar, Jason; Steinberg, Leah; Gugger, James; Levine, Steven R.

2014-01-01

Background QT dispersion (QTd) has been proposed as an indirect ECG measure of heterogeneity of ventricular repolarization. The predictive value of QTd in acute stroke remains controversial. We aimed to clarify the relationship between QTd and acute stroke and stroke prognosis. Methods A systematic review of the literature was performed using pre-specified medical subjects heading (MeSH) terms, Boolean logic and the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) guidelines. Eligible studies (a) included ischemic or hemorrhagic stroke and (b) provided QTd measurements. Results Two independent reviewers identified 553 publications. Sixteen articles were included in the final analysis. There were a total of 888 stroke patients: 59% ischemic and 41% hemorrhagic. There was considerable heterogeneity in study design, stroke subtypes, ECG assessment-time, control groups and comparison groups. Nine studies reported a significant association between acute stroke and baseline QTd. Two studies reported that QTd increases are specifically related to hemorrhagic strokes, involvement of the insular cortex, right-side lesions, larger strokes, and increases in 3, 4-dihydroxyphenylethylene glycol in hemorrhagic stroke. Three studies reported QTd to be an independent predictor of stroke mortality. One study each reported increases in QTd in stroke patients who developed ventricular arrhythmias and cardiorespiratory compromise. Conclusions There are few well-designed studies and considerable variability in study design in addressing the significance of QTd in acute stroke. Available data suggest that stroke is likely to be associated with increased QTd. While some evidence suggests a possible prognostic role of QTd in stroke, larger and well-designed studies need to confirm these findings. PMID:25282188

Does facilitated Advance Care Planning reduce the costs of care near the end of life? Systematic review and ethical considerations

PubMed Central

Klingler, Corinna; in der Schmitten, Jürgen; Marckmann, Georg

2015-01-01

Background: While there is increasing evidence that Advance Care Planning has the potential to strengthen patient autonomy and improve quality of care near the end of life, it remains unclear whether it could also reduce net costs of care. Aim: This study aims to describe the cost implications of Advance Care Planning programmes and discusses ethical conflicts arising in this context. Design: We conducted a systematic review based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. Data sources: We systematically searched the databases PubMed, NHS EED, EURONHEED, Cochrane Library and EconLit. We included empirical studies (no limitation to study type) that investigated the cost implications of Advance Care Planning programmes involving professionally facilitated end-of-life discussions. Results and discussion: Seven studies met our inclusion criteria. Four of them used a randomised controlled design, one used a before-after design and two were observational studies. Six studies found reductions in costs of care ranging from USD1041 to USD64,827 per patient, depending on the study period and the cost measurement. One study detected no differences in costs. Studies varied considerably regarding the Advance Care Planning intervention, patient selection and costs measured which may explain some of the variations in findings. Normative appraisal: Looking at the impact of Advance Care Planning on costs raises delicate ethical issues. Given the increasing pressure to reduce expenditures, there may be concerns that cost considerations could unduly influence the sensitive communication process, thus jeopardising patient autonomy. Safeguards are proposed to reduce these risks. Conclusion: The limited data indicate net cost savings may be realised with Advance Care Planning. Methodologically robust trials with clearly defined Advance Care Planning interventions are needed to make the costs and returns of Advance Care Planning transparent. PMID:26294218

Propagation considerations in the American Mobile Satellite system design

NASA Technical Reports Server (NTRS)

Kittiver, Charles; Sigler, Charles E., Jr.

1993-01-01

An overview of the American Mobile Satellite Corporation (AMSC) mobile satellite services (MSS) system with special emphasis given to the propagation issues that were considered in the design is presented. The aspects of the voice codec design that effect system performance in a shadowed environment are discussed. The strategies for overcoming Ku-Band rain fades in the uplink and downlink paths of the gateway station are presented. A land mobile propagation study that has both measurement and simulation activities is described.

A computer aided engineering tool for ECLS systems

NASA Technical Reports Server (NTRS)

Bangham, Michal E.; Reuter, James L.

1987-01-01

The Computer-Aided Systems Engineering and Analysis tool used by NASA for environmental control and life support system design studies is capable of simulating atmospheric revitalization systems, water recovery and management systems, and single-phase active thermal control systems. The designer/analysis interface used is graphics-based, and allows the designer to build a model by constructing a schematic of the system under consideration. Data management functions are performed, and the program is translated into a format that is compatible with the solution routines.

Design considerations to enhance the safety of patient compartments in ambulance transporters.

PubMed

Byran, Eyal; Gilad, Issachar

2012-01-01

The safety of the interior of ambulances is dubious and, in the event of sudden impact during emergency transport, potentially perilous to patients they carry. The workplace ergonomics of the interior of the passenger cabin is lacking. This article discusses an improved ergonomic interior design based on study findings, observations and subjective perception. It suggests design aspects and safety concepts aimed at increasing the safety of patients and paramedic staff inside the ambulance as a mobile workstation.

Design of a fiber-optic transmitter for microwave analog transmission with high phase stability

NASA Technical Reports Server (NTRS)

Logan, R. T., Jr.; Lutes, G. F.; Primas, L. E.; Maleki, L.

1990-01-01

The principal considerations in the design of fiber-optic transmitters for highly phase-stable radio frequency and microwave analog transmission are discussed. Criteria for a fiber-optic transmitter design with improved amplitude and phase-noise performance are developed through consideration of factors affecting the phase noise, including low-frequency laser-bias supply noise, the magnitude and proximity of external reflections into the laser, and temperature excursions of the laser-transmitter package.

The Design Consideration for Game-Based Learning

ERIC Educational Resources Information Center

Liang, Chaoyun; Lee, Yuan-Zone; Chou, Wen-Shou

2010-01-01

The integration of game playing with online education has recently become one of the most discussed issues in the e-learning field for its potentially positive impact on the development of related industries and on the social lives of young people. In this article, the authors propose a set of design considerations to assist game-based learning…

Tokamak experimental power reactor conceptual design. Volume II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-08-01

Volume II contains the following appendices: (1) summary of EPR design parameters, (2) impurity control, (3) plasma computational models, (4) structural support system, (5) materials considerations for the primary energy conversion system, (6) magnetics, (7) neutronics penetration analysis, (8) first wall stress analysis, (9) enrichment of isotopes of hydrogen by cryogenic distillation, and (10) noncircular plasma considerations. (MOW)

Design Considerations for mHealth Programs Targeting Smokers Not Yet Ready to Quit: Results of a Sequential Mixed-Methods Study.

PubMed

McClure, Jennifer B; Heffner, Jaimee; Hohl, Sarah; Klasnja, Predrag; Catz, Sheryl L

2017-03-10

Mobile health (mHealth) smoking cessation programs are typically designed for smokers who are ready to quit smoking. In contrast, most smokers want to quit someday but are not yet ready to quit. If mHealth apps were designed for these smokers, they could potentially encourage and assist more people to quit smoking. No prior studies have specifically examined the design considerations of mHealth apps targeting smokers who are not yet ready to quit. To inform the user-centered design of mHealth apps for smokers who were not yet ready to quit by assessing (1) whether these smokers were interested in using mHealth tools to change their smoking behavior; (2) their preferred features, functionality, and content of mHealth programs addressing smoking; and (3) considerations for marketing or distributing these programs to promote their uptake. We conducted a sequential exploratory, mixed-methods study. Qualitative interviews (phase 1, n=15) were completed with a demographically diverse group of smokers who were smartphone owners and wanted to quit smoking someday, but not yet. Findings informed a Web-based survey of smokers from across the United States (phase 2, n=116). Data were collected from April to September, 2016. Findings confirmed that although smokers not yet ready to quit are not actively seeking treatment or using cessation apps, most would be interested in using these programs to help them reduce or change their smoking behavior. Among phase 2 survey respondents, the app features, functions, and content rated most highly were (1) security of personal information; (2) the ability to track smoking, spending, and savings; (3) content that adaptively changes with one's needs; (4) the ability to request support as needed; (5) the ability to earn and redeem awards for program use; (6) guidance on how to quit smoking; and (7) content specifically addressing management of nicotine withdrawal, stress, depression, and anxiety. Results generally did not vary by stage of change for quitting smoking (precontemplation vs contemplation). The least popular feature was the ability to share progress via social media. Relevant to future marketing or distribution considerations, smokers were price-sensitive and valued empirically validated programs. Program source, expert recommendations, and user ratings were also important considerations. Smokers who are not yet ready to quit represent an important target group for intervention. Study findings suggest that many of these individuals are receptive to using mHealth tools to reduce or quit smoking, despite not having made a commitment to quit yet. The preferences for specific mHealth intervention features, functionality, and content outlined in this paper can aid addiction treatment experts, design specialists, and software developers interested in creating engaging interventions for smokers who want to quit in the future but are not yet committed to this important health goal. ©Jennifer B McClure, Jaimee Heffner, Sarah Hohl, Predrag Klasnja, Sheryl L Catz. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 10.03.2017.

Operating experiences with rotary air-to-air heat exchangers: hospitals, schools, nursing homes, swimming pools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pearson, R.J.

1976-01-01

Systems utilizing rotary air-to-air heat exchangers are discussed. Basic considerations of use (fresh air requirements, system configurations, cost considerations), typical system layout/design considerations, and operating observations by engineers, staff and maintenance personnel are described.

Preliminary space station solar array structural design study

NASA Technical Reports Server (NTRS)

Dorsey, J. T.; Bush, H. G.; Mikulas, M. M., Jr.

1984-01-01

Structurally efficient ways to support the large solar arrays (3,716 square meters which are currently considered for space station use) are examined. An erectable truss concept is presented for the on orbit construction of winged solar arrays. The means for future growth, maintenance, and repair are integrally designed into this concept. Results from parametric studies, which highlight the physical and structural differences between various configuration options are presented. Consideration is given to both solar blanket and hard panel arrays.

High-freezing-point fuel studies

NASA Technical Reports Server (NTRS)

Tolle, F. F.

1980-01-01

Considerable progress in developing the experimental and analytical techniques needed to design airplanes to accommodate fuels with less stringent low temperature specifications is reported. A computer technique for calculating fuel temperature profiles in full tanks was developed. The computer program is being extended to include the case of partially empty tanks. Ultimately, the completed package is to be incorporated into an aircraft fuel tank thermal analyser code to permit the designer to fly various thermal exposure patterns, study fuel temperatures versus time, and determine holdup.

Preliminary space station solar array structural design study

NASA Astrophysics Data System (ADS)

Dorsey, J. T.; Bush, H. G.; Mikulas, M. M., Jr.

Structurally efficient ways to support the large solar arrays (3,716 square meters which are currently considered for space station use) are examined. An erectable truss concept is presented for the on orbit construction of winged solar arrays. The means for future growth, maintenance, and repair are integrally designed into this concept. Results from parametric studies, which highlight the physical and structural differences between various configuration options are presented. Consideration is given to both solar blanket and hard panel arrays.

Effects of Antismoking Advertising–Based Beliefs on Adult Smokers’ Consideration of Quitting

PubMed Central

Netemeyer, Richard G.; Andrews, J. Craig; Burton, Scot

2005-01-01

Objectives. We examined whether specific antismoking advertising–based beliefs regarding the addictiveness of smoking, the dangers of environmental tobacco smoke, and the tobacco industry’s use of deceptive advertising practices are associated with adult smokers’ consideration of quitting. We also assessed whether interactions between such beliefs and having children living in the home were associated with consideration of quitting. Methods. We used analyses of smokers’ responses to a telephone survey conducted after completion of the Wisconsin Anti-Tobacco Media Campaign to test hypotheses associated with our study objectives. Results. Results indicated that advertising-based beliefs regarding smoking addictiveness and the dangers of environmental tobacco smoke were associated with consideration of quitting. The findings also showed that consideration of quitting was positively affected by the interaction between number of children living at home and advertising-based beliefs about deceptive tobacco industry advertising practices designed to induce people to smoke. Conclusions. Creating advertisements that target specific antismoking beliefs may be the most effective approach to enhancing consideration of quitting among adult smokers, particularly those with children living at home. PMID:15914834

Effects of antismoking advertising--based beliefs on adult smokers' consideration of quitting.

PubMed

Netemeyer, Richard G; Andrews, J Craig; Burton, Scot

2005-06-01

We examined whether specific antismoking advertising-based beliefs regarding the addictiveness of smoking, the dangers of environmental tobacco smoke, and the tobacco industry's use of deceptive advertising practices are associated with adult smokers' consideration of quitting. We also assessed whether interactions between such beliefs and having children living in the home were associated with consideration of quitting. We used analyses of smokers' responses to a telephone survey conducted after completion of the Wisconsin Anti-Tobacco Media Campaign to test hypotheses associated with our study objectives. Results indicated that advertising-based beliefs regarding smoking addictiveness and the dangers of environmental tobacco smoke were associated with consideration of quitting. The findings also showed that consideration of quitting was positively affected by the interaction between number of children living at home and advertising-based beliefs about deceptive tobacco industry advertising practices designed to induce people to smoke. Creating advertisements that target specific antismoking beliefs may be the most effective approach to enhancing consideration of quitting among adult smokers, particularly those with children living at home.

Holistic Design for Total Product Well Being

NASA Technical Reports Server (NTRS)

Adams, Chris W.; Hamilton, George S.

2004-01-01

Recent hardware development work at NASA's Marshall Space Flight Center creates and argument for the use of a holistic design approach as opposed to a piece part design approach. A piece part design approach being one where individual pieces are developed to their finished state having to meet certain interface and human engineering requirements without much consideration to the final product as a whole. A holistic design approach being one where the final product is evaluated early and frequently during the design process, and individual parts are developed with consideration to how they interact a whole,and how they interact with the user and environment. Examples from the development of the Materials Science Research Rack - 1 will illustrate: a design failure due to piece part design; a design save, due to a failure of piece part design, but saved by evaluating the design holistically; and a design success due to a holistic design approach.

Preliminary study of optimum ductburning turbofan engine cycle design parameters for supersonic cruising

NASA Technical Reports Server (NTRS)

Fishbach, L. H.

1978-01-01

The effect of turbofan engine overall pressure ratio, fan pressure ratio, and ductburner temperature rise on the engine weight and cruise fuel consumption for a mach 2.4 supersonic transport was investigated. Design point engines, optimized purely for the supersonic cruising portion of the flight where the bulk of the fuel is consumed, are considered. Based on constant thrust requirements at cruise, fuel consumption considerations would favor medium by pass ratio engines (1.5 to 1.8) of overall pressure ratio of about 16. Engine weight considerations favor low bypass ratio (0.6 or less) and low wverall pressure ratio (8). Combination of both effects results in bypass ratios of 0.6 to 0.8 and overall pressure ratio of 12 being the overall optimum.

Photovoltaic central station step and touch potential considerations in grounding system design

NASA Technical Reports Server (NTRS)

Engmann, G.

1983-01-01

The probability of hazardous step and touch potentials is an important consideration in central station grounding system design. Steam turbine generating station grounding system design is based on accepted industry practices and there is extensive in-service experience with these grounding systems. A photovoltaic (PV) central station is a relatively new concept and there is limited experience with PV station grounding systems. The operation and physical configuration of a PV central station is very different from a steam electric station. A PV station bears some similarity to a substation and the PV station step and touch potentials might be addressed as they are in substation design. However, the PV central station is a generating station and it is appropriate to examine the effect that the differences and similarities of the two types of generating stations have on step and touch potential considerations.

Design considerations for a gas microcontroller

NASA Technical Reports Server (NTRS)

Ritter, D. A.

1986-01-01

Some of the design problems that are now being addressed in consideration of a microcontroller for the upcoming GAS payload are discussed. Microcontrollers will be used to run the experiments and to collect and store the data from those experiments. Some of the requirements for a microcontroller are to be small, lightweight, have low power consumption, and high reliability. Some of the solutions that were developed to meet these design requirements are discussed. At present, the experiment is still in the design stage and the final design may change from what is presented here. The search for new integrated circuits which will do all that is needed all in one package continues.

Preliminary design study of underground pumped hydro and compressed-air energy storage in hard rock. Volume 8: Design approaches: UPH. Appendix C: Heavy hoist

NASA Astrophysics Data System (ADS)

1981-04-01

Overriding considerations, including type of hoist, capacity limitations, operating speed, haulage ropes, guides, conveyance, and landings were studied within the context both of feasibility and of minimizing equipment costs. The study led to the selection of a twin drum, twin electric drive hoist, and for depths as much as 5000 ft, hoist capacities of up to 300 tons were found to be feasible. A brief reference is made to the requirements for hoisting equipment other than for heavy loads.

Collegiality and commerce: The culture of consideration amongst engineers

NASA Astrophysics Data System (ADS)

Nugent, Paul David

This study is a participant observation ethnography of engineering relationships at a defense contracting plant that specializes in the design and manufacture of launch control systems for nuclear submarines. "Consideration" is presented as a unique mode of interaction enabling resource exchange and pivotal in developing and strengthening work relationships. Consideration differs from other modes of exchange such as markets, gift-giving, and charity primarily in that the bestowal of the resource involves little sacrifice. The manner in which consideration is enacted by the engineers, the structural and cultural conditions supporting consideration, and the social and economic consequences of consideration are presented. From these findings it is concluded that consideration is a unique form of economic exchange embedded in concrete relationships that forces us to rethink and extend current conceptualizations of trust, networks, social capital, and friendship in the workplace. The data for the analysis were drawn from twenty interviews and fieldnotes collected and transcribed over a twelve month period. Quotations from the interviews and exerpts from the fieldnotes are included to illustrate claims being made in the analysis as well as to familiarize the reader with the culture developed by engineers and managers in a defense contracting plant.

Optimal designs for prediction studies of whiplash.

PubMed

Kamper, Steven J; Hancock, Mark J; Maher, Christopher G

2011-12-01

Commentary. To provide guidance for the design and interpretation of predictive studies of whiplash associated disorders (WAD). Numerous studies have sought to define and explain the clinical course and response to treatment of people with WAD. Design of these studies is often suboptimal, which can lead to biased findings and issues with interpreting the results. Literature review and commentary. Predictive studies can be grouped into four broad categories; studies of symptomatic course, studies that aim to identify factors that predict outcome, studies that aim to isolate variables that are causally responsible for outcome, and studies that aim to identify patients who respond best to particular treatments. Although the specific research question will determine the optimal methods, there are a number of generic features that should be incorporated into design of such studies. The aim of these features is to minimize bias, generate adequately precise prognostic estimates, and ensure generalizability of the findings. This paper provides a summary of important considerations in the design, conduct, and reporting of prediction studies in the field of whiplash.

Theoretical studies on the mechanical behavior of granular materials under very low intergranular stresses

NASA Technical Reports Server (NTRS)

French, Kenneth W., Jr.

1986-01-01

The salient aspects of the theoretical modeling of a conventional triaxial test (CTC) of a cohesionless granular medium with stress and strain rate loading are described. Included are a controllable gravitational body force and provision for low confining pressure and/or very low intergranular stress. The modeling includes rational, analytic, and numerical phases, all in various stages of development. The numerical evolutions of theoretical models will be used in final design stages and in the analysis of the experimental data. In this the experimental design stage, it is of special interest to include in the candidate considerations every anomaly found in preliminary terrestrial experimentation. Most of the anomalies will be eliminated by design or enhanced for measurement as the project progresses. The main aspect of design being not the physical apparatus but the type and trajectories of loading elected. The major considerations that have been treated are: appearance and growth of local surface aberrations, stress-power coefficients, strain types, optical strain, radial bead migration, and measures of rotation for the proper stress flux.

Development of an interactive GIS based work zone traffic control tool.

DOT National Transportation Integrated Search

2013-08-01

The purpose of this study was to include consideration for intersections into the previously created GIS traffic control planning tool. Available data for making intersection control calculations were collected and integrated into the design of the t...

NYSDOT consideration of potential intermodal sites for Long Island.

DOT National Transportation Integrated Search

2011-06-09

This Study was prepared in response to the Governor's directive to conduct an extensive analysis of the feasibility of a truck/rail : facility on Long Island. It was designed to answer three questions: : Is an intermodal truck/rail transfer facil...

Distribution factors for construction loads and girder capacity equations, final report.

DOT National Transportation Integrated Search

2017-03-01

During the process of constructing a highway bridge, there are several construction stages that warrant : consideration from a structural safety and design perspective. The first objective of the present study was to use analytical : models of prestr...

Quasi-experimental study designs series-paper 9: collecting data from quasi-experimental studies.

PubMed

Aloe, Ariel M; Becker, Betsy Jane; Duvendack, Maren; Valentine, Jeffrey C; Shemilt, Ian; Waddington, Hugh

2017-09-01

To identify variables that must be coded when synthesizing primary studies that use quasi-experimental designs. All quasi-experimental (QE) designs. When designing a systematic review of QE studies, potential sources of heterogeneity-both theory-based and methodological-must be identified. We outline key components of inclusion criteria for syntheses of quasi-experimental studies. We provide recommendations for coding content-relevant and methodological variables and outlined the distinction between bivariate effect sizes and partial (i.e., adjusted) effect sizes. Designs used and controls used are viewed as of greatest importance. Potential sources of bias and confounding are also addressed. Careful consideration must be given to inclusion criteria and the coding of theoretical and methodological variables during the design phase of a synthesis of quasi-experimental studies. The success of the meta-regression analysis relies on the data available to the meta-analyst. Omission of critical moderator variables (i.e., effect modifiers) will undermine the conclusions of a meta-analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

Injector design guidelines for gas/liquid propellant systems

NASA Technical Reports Server (NTRS)

Falk, A. Y.; Burick, R. J.

1973-01-01

Injector design guidelines are provided for gas/liquid propellant systems. Information was obtained from a 30-month applied research program encompassing an analytical, design, and experimental effort to relate injector design parameters to simultaneous attainment of high performance and component (injector/thrust chamber) compatibility for gas/liquid space storable propellants. The gas/liquid propellant combination studied was FLOX (82.6% F2)/ ambient temperature gaseous methane. Design criteria that provide for simultaneous attainment of high performance and chamber compatibility are presented for both injector types. Parametric data are presented that are applicable for the design of circular coaxial and like-doublet injectors that operate with design parameters similar to those employed. However, caution should be exercised when applying these data to propellant combinations whose elements operate in ranges considerably different from those employed in this study.

Application of EVA guidelines and design criteria. Volume 1: EVA selection/systems design considerations

NASA Technical Reports Server (NTRS)

Brown, N. E.

1973-01-01

Parameters that require consideration by the planners and designers when planning for man to perform functions outside the vehicle are presented in terms of the impact the extravehicular crewmen and major EV equipment items have on the mission, vehicle, and payload. Summary data on man's performance capabilities in the weightless space environment are also provided. The performance data are based on orbital and transearth EVA from previous space flight programs and earthbound simulations, such as water immersion and zero-g aircraft.

Reliable Thermoelectric Module Design under Opposing Requirements from Structural and Thermoelectric Considerations

NASA Astrophysics Data System (ADS)

Karri, Naveen K.; Mo, Changki

2018-06-01

Structural reliability of thermoelectric generation (TEG) systems still remains an issue, especially for applications such as large-scale industrial or automobile exhaust heat recovery, in which TEG systems are subject to dynamic loads and thermal cycling. Traditional thermoelectric (TE) system design and optimization techniques, focused on performance alone, could result in designs that may fail during operation as the geometric requirements for optimal performance (especially the power) are often in conflict with the requirements for mechanical reliability. This study focused on reducing the thermomechanical stresses in a TEG system without compromising the optimized system performance. Finite element simulations were carried out to study the effect of TE element (leg) geometry such as leg length and cross-sectional shape under constrained material volume requirements. Results indicated that the element length has a major influence on the element stresses whereas regular cross-sectional shapes have minor influence. The impact of TE element stresses on the mechanical reliability is evaluated using brittle material failure theory based on Weibull analysis. An alternate couple configuration that relies on the industry practice of redundant element design is investigated. Results showed that the alternate configuration considerably reduced the TE element and metallization stresses, thereby enhancing the structural reliability, with little trade-off in the optimized performance. The proposed alternate configuration could serve as a potential design modification for improving the reliability of systems optimized for thermoelectric performance.

Maximizing ecological and evolutionary insight in bisulfite sequencing data sets

PubMed Central

Lea, Amanda J.; Vilgalys, Tauras P.; Durst, Paul A.P.; Tung, Jenny

2017-01-01

Preface Genome-scale bisulfite sequencing approaches have opened the door to ecological and evolutionary studies of DNA methylation in many organisms. These approaches can be powerful. However, they introduce new methodological and statistical considerations, some of which are particularly relevant to non-model systems. Here, we highlight how these considerations influence a study’s power to link methylation variation with a predictor variable of interest. Relative to current practice, we argue that sample sizes will need to increase to provide robust insights. We also provide recommendations for overcoming common challenges and an R Shiny app to aid in study design. PMID:29046582

Considerations Regarding the Development of an Environmental Control and Life Support System for Lunar Surface Applications

NASA Technical Reports Server (NTRS)

Bagdigian, Robert M.

2008-01-01

NASA is engaged in early architectural analyses and trade studies aimed at identifying requirements, predicting performance and resource needs, characterizing mission constraints and sensitivities, and guiding technology development planning needed to conduct a successful human exploration campaign of the lunar surface. Conceptual designs and resource estimates for environmental control and life support systems (ECLSS) within pressurized lunar surface habitats and rovers have been considered and compared in order to support these lunar campaign studies. This paper will summarize those concepts and some of the more noteworthy considerations that will likely remain as key drivers in the evolution of the lunar surface ECLSS architecture.

Design considerations of electromagnetic force in a direct drive permanent magnet brushless motor

NASA Astrophysics Data System (ADS)

Chen, H. S.; Tsai, M. C.

2008-04-01

In this paper, a numerical study of electromagnetic force associated with the width of stator teeth, width of rotor back iron, and slot opening for a ten-pole nine-slot direct drive permanent magnet brushless motor is presented. The study calculates the amplitude of the electromagnetic force on the rotating rotor by using the finite-element method. The results show that the amplitude of electromagnetic force, which may cause the noise and vibration of motors, changes with the variation of these above mentioned three factors. The relationship between the considerations of output torque and the minimization of noise and vibration is also established in this paper.

Feasibility study of the design of Bi Ra Systems, Incorporated model 5301, 5101, and 3222 CAMAC modules for space use

NASA Technical Reports Server (NTRS)

Biswell, L.; Mcelderry, R.

1976-01-01

Cost estimates are determined for redesigned modules. Consideration is given to incorporation of NASA approved components, component screening and documentation, as well as reduced power consumption. Results show that r designed modules will function reliably in a space environment of 50 C and withstand greater than 15 G's of random vibration between 40 Hz and 400 Hz.

Multi-Channel, Constant-Current Power Source for Aircraft Applications

DTIC Science & Technology

2017-03-01

Special considerations impacting this design were minimizing volume, maintaining system power quality, and providing electrical fault protection...applications. Electrical loads, such as lighting, de-icing heaters, and actuators may be operated from this compact power conversion unit. Because of the...nature of aircraft systems, two of the most important design considerations are the maintenance of electrical power quality and minimization of weight

Solid state sandwich concept: Designs, considerations and issues. [solar power satellite transmission

NASA Technical Reports Server (NTRS)

Maynard, O. E.

1980-01-01

Progress in analysis and design of solid state approaches to the solar power satellite microwave power transmission system is reviewed with special emphasis on the Sandwich concept and the issues of maintenance of low junction temperatures for amplifiers to assure acceptable lifetime. Ten specific issues or considerations are discussed and their resolution or status is presented.

Sustainable supply chain design: a configurational approach.

PubMed

Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

Sustainable Supply Chain Design: A Configurational Approach

PubMed Central

Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652

Considerations of the Concept of Infant Health: A Literature Review

ERIC Educational Resources Information Center

Almqvist-Tangen, Gerd; Axelsson, Asa

2006-01-01

This study examined a wide range of literature in order to describe factors associated with the concept of infant health. The design of the study is a literature review examining 21 research studies, written in the English language. The study explored which factors were found to exert an influence on the concept of infant health. The result showed…

Behavior and design of large structural concrete bridge pier overhangs.

DOT National Transportation Integrated Search

1997-02-01

In designing large cantilever bent caps for use on recent projects under current AASHTO design specifications, : designers were faced with considerable uncertainties. Questions arose when designers attempted to satisfy : both serviceability and stren...

Forgiveness and Consideration of Future Consequences in Aggressive Driving

PubMed Central

Moore, Michael; Dahlen, Eric R.

2008-01-01

Most research on aggressive driving has focused on identifying aspects of driver personality which will exacerbate it (e.g., sensation seeking, impulsiveness, driving anger, etc.). The present study was designed to examine two theoretically relevant but previously unexplored personality factors predicted to reduce the risk of aggressive driving: trait forgiveness and consideration of future consequences. The utility of these variables in predicting aggressive driving and driving anger expression was evaluated among 316 college student volunteers. Hierarchical multiple regressions permitted an analysis of the incremental validity of these constructs beyond respondent gender, age, miles driven per week, and driving anger. Both forgiveness and consideration of future consequences contributed to the prediction of aggressive driving and driving anger expression, independent of driving anger. Research on aggressive driving may be enhanced by greater attention to adaptive, potentially risk-reducing traits. Moreover, forgiveness and consideration of future consequences may have implications for accident prevention. PMID:18760093

Scheduler Design Criteria: Requirements and Considerations

NASA Technical Reports Server (NTRS)

Lee, Hanbong

2016-01-01

This presentation covers fundamental requirements and considerations for developing schedulers in airport operations. We first introduce performance and functional requirements for airport surface schedulers. Among various optimization problems in airport operations, we focus on airport surface scheduling problem, including runway and taxiway operations. We then describe a basic methodology for airport surface scheduling such as node-link network model and scheduling algorithms previously developed. Next, we explain how to design a mathematical formulation in more details, which consists of objectives, decision variables, and constraints. Lastly, we review other considerations, including optimization tools, computational performance, and performance metrics for evaluation.

Intercultural Blended Design Considerations: A Case Study of a Nordic-Baltic Course in Autism Intervention

ERIC Educational Resources Information Center

Kack, Annika; Roll-Pettersson, Lise; Alai-Rosales, Shahla S.; Hoium, Kari; Mannikko-Barbutiu, Sirkku; Fors, Uno G. H.

2014-01-01

Specialized educational programs previously unavailable to many students are now accessible to students spread throughout the world. In particular, this globalization presents new opportunities and challenges for universities educating professionals in the field of autism treatment. The aim of the present case study is to analyse the experiences…

Engineering study of the rotary-vee engine concept

NASA Technical Reports Server (NTRS)

Willis, Edward A.; Bartrand, Timothy A.; Beard, John E.

1989-01-01

The applicable thermodynamic cycle and performance considerations when the rotary-vee mechanism is used as an internal combustion (I.C.) heat engine are reviewed. Included is a simplified kinematic analysis and studies of the effects of design parameters on the critical pressures, torques and parasitic losses. A discussion of the principal findings is presented.

High School and University Students' Knowledge and Attitudes regarding Biotechnology: A Turkish Experience

ERIC Educational Resources Information Center

Usak, Muhammet; Erdogan, Mehmet; Prokop, Pavol; Ozel, Murat

2009-01-01

Biotechnology has a considerable importance in Turkish biology curriculum. This study was designed to explore or indicate Turkish high school and university students' knowledge and attitudes toward biotechnology. A total number of 352 high school and 276 university students were invited to the study. The Biotechnology Knowledge Questionnaire (BKQ)…

Improved minimum cost and maximum power two stage genome-wide association study designs.

PubMed

Stanhope, Stephen A; Skol, Andrew D

2012-01-01

In a two stage genome-wide association study (2S-GWAS), a sample of cases and controls is allocated into two groups, and genetic markers are analyzed sequentially with respect to these groups. For such studies, experimental design considerations have primarily focused on minimizing study cost as a function of the allocation of cases and controls to stages, subject to a constraint on the power to detect an associated marker. However, most treatments of this problem implicitly restrict the set of feasible designs to only those that allocate the same proportions of cases and controls to each stage. In this paper, we demonstrate that removing this restriction can improve the cost advantages demonstrated by previous 2S-GWAS designs by up to 40%. Additionally, we consider designs that maximize study power with respect to a cost constraint, and show that recalculated power maximizing designs can recover a substantial amount of the planned study power that might otherwise be lost if study funding is reduced. We provide open source software for calculating cost minimizing or power maximizing 2S-GWAS designs.

International Conference on the Mechanical Technology of Inertial Devices, University of Newcastle-upon-Tyne, England, Apr. 7-9, 1987, Proceedings

NASA Astrophysics Data System (ADS)

Various papers on the mechanical technology of inertial devices are presented. The topics addressed include: development of a directional gyroscope for remotely piloted vehicles and similar applications; a two-degree-of-freedom gyroscope with frictionless inner and outer gimbal pickoffs; oscillogyro design, manufacture, and performance; development of miniature two-axis rate gyroscope; mechanical design aspects of the electrostatically suspended gyroscope; role of gas-lubricated bearings in current and future sensors; development of a new microporous retainer material for precision ball bearings; design study for a high-stability, large-centrifuge test bed; evaluation of a two-axis rate gyro; operating principles of a two-axis angular rate transducer; and nutation frequency analysis. Also considered are: triaxial laser gyro; mechanical design considerations for a ring laser gyro dither mechanism; environmental considerations in the design of fiberoptic gyroscopes; manufacturing aspects of some critical high-precision mechanical components of inertial devices; dynamics and control of a gyroscopic force measurement system; high precision and high performance motion systems; use of multiple acceleration references to obtain high precision centrifuge data at low cost; gyro testing and evaluation at the Communications Research Centre; review of the mechanical design and development of a high-performance accelerometer; and silicon microengineering for accelerometers.

Intraarticular Facet Injections for Low Back Pain: Design Considerations, Consensus Methodology to Develop the Protocol for a Randomized Controlled Trial.

PubMed

Mars, Tom; Ellard, David R; Antrobus, James H L; Cairns, Melinda; Underwood, Martin; Haywood, Kirstie; Keohane, Susie; Sandhu, Harbinder; Griffiths, Frances

2015-01-01

Since the publication of guidelines by the UK National Institute for Health and Care Excellence (NICE) and the American Pain Society guidelines for low back pain in 2009 there have been deep divisions in the pain treatment community about the use of therapeutic intraarticular facet joint injections. While evidence for the effectiveness or not of intraarticular facet joint injections remains sparse, uncertainty will remain. The Warwick feasibility study, along with a concurrent study with a different design led by another group, aims to provide a stable platform from which the effectiveness and cost effectiveness of intraarticular facet joint injections added to normal care could be evaluated in randomized controlled trials (RCTs). To reach consensus on key design considerations for the Warwick facet feasibility study from which the study protocol and working manuals will be developed. A consensus conference involving expert professionals and lay members. Preliminary work identified 5 key design considerations for deliberation at our consensus conference. Three concerned patient assessment and treatment: diagnosis of possible facet joint pain, interaarticular facet joint injection technique, and best usual care. Two concerned trial analysis: a priori sub-groups and minimally important difference and are reported elsewhere. We did systematic evidence reviews of the design considerations and summarized the evidence. Our design questions and evidence summaries were distributed to all delegates. This formed the basis for discussions on the day. Clinical experts in all aspects of facet joint injection from across the UK along with lay people were invited via relevant organizations. Nominal group technique was used in 15 facilitated initial small group discussions. Further discussion and ranking was undertaken in plenary. All small group and plenary results were recorded and checked and verified post conference. Where necessary participants were contacted via email to resolve outstanding issues. Fifty-two delegates attended the conference with lay people and all relevant professions represented. Consensus was reached on the details of how to assess patients for facet joint pain, undertake the injections, and deliver usual care. Where post conference checking of results revealed errors in calculating ranking results on the day, consensus was reached by email consultation. All but 3 delegates agreed to be associated with the outcome. Allocating one day for discussing a wide range of topics imposed time pressure on discussion and calculation of the numerous rankings. Through the use of an evidence-based, systematic, inclusive, and transparent process we have established consensus from expert health professionals in the UK, with lay input, on the clinical assessment of suspected facet joint pain, interaarticular injection for facet joint pain, and best usual care for use in a feasibility study for a proposed pragmatic clinical trial of interaarticular facet joint injections. This provides a strong basis for a clinical trial that will be acceptable to the pain treatment community.

Human Factors Considerations in the Design of Systems of Computer Managed Instruction

ERIC Educational Resources Information Center

Bozeman, William C.

1978-01-01

The findings of this study indicate that a significant portion of the wide variance in the success of the implementation of the Wisconsin System for Instructional Management is attributable to the psychological type of the user. (Author/IRT)

NYSDOT consideration of potential intermodal sites for Long Island : appendices.

DOT National Transportation Integrated Search

2011-06-09

This Study was prepared in response to the Governor's directive to conduct an extensive analysis of the feasibility of a truck/rail facility on Long Island. It was designed to answer three questions: Is an intermodal truck/rail transfer facility ...

Developing longitudinal qualitative designs: lessons learned and recommendations for health services research.

PubMed

Calman, Lynn; Brunton, Lisa; Molassiotis, Alex

2013-02-06

Longitudinal qualitative methods are becoming increasingly used in the health service research, but the method and challenges particular to health care settings are not well described in the literature.We reflect on the strategies used in a longitudinal qualitative study to explore the experience of symptoms in cancer patients and their carers, following participants from diagnosis for twelve months; we highlight ethical, practical, theoretical and methodological issues that need to be considered and addressed from the outset of a longitudinal qualitative study. Key considerations in undertaking longitudinal qualitative projects in health research, include the use of theory, utilizing multiple methods of analysis and giving consideration to the practical and ethical issues at an early stage. These can include issues of time and timing; data collection processes; changing the topic guide over time; recruitment considerations; retention of staff; issues around confidentiality; effects of project on staff and patients, and analyzing data within and across time. As longitudinal qualitative methods are becoming increasingly used in health services research, the methodological and practical challenges particular to health care settings need more robust approaches and conceptual improvement. We provide recommendations for the use of such designs. We have a particular focus on cancer patients, so this paper will have particular relevance for researchers interested in chronic and life limiting conditions.

Considerations for the nonclinical safety evaluation of antibody drug conjugates for oncology.

PubMed

Roberts, Stanley A; Andrews, Paul A; Blanset, Diann; Flagella, Kelly M; Gorovits, Boris; Lynch, Carmel M; Martin, Pauline L; Kramer-Stickland, Kimberly; Thibault, Stephane; Warner, Garvin

2013-12-01

Antibody drug conjugates (ADCs) include monoclonal antibodies that are linked to cytotoxic small molecules. A number of these agents are currently being developed as anti-cancer agents designed to improve the therapeutic index of the cytotoxin (i.e., cytotoxic small molecule or cytotoxic agent) by specifically delivering it to tumor cells. This paper presents primary considerations for the nonclinical safety evaluation of ADCs and includes strategies for the evaluation of the entire ADC or the various individual components (i.e., antibody, linker or the cytotoxin). Considerations are presented on how to design a nonclinical safety assessment program to identify the on- and off-target toxicities to enable first-in-human (FIH) studies. Specific discussions are also included that provide details as to the need and how to conduct the studies for evaluating ADCs in genetic toxicology, tissue cross-reactivity, safety pharmacology, carcinogenicity, developmental and reproductive toxicology, biotransformation, toxicokinetic monitoring, bioanalytical assays, immunogenicity testing, test article stability and the selection of the FIH dose. Given the complexity of these molecules and our evolving understanding of their properties, there is no single all-encompassing nonclinical strategy. Instead, each ADC should be evaluated on a case-by-case scientifically-based approach that is consistent with ICH and animal research guidelines. Copyright © 2013 Elsevier Inc. All rights reserved.

Considerations for Infectious Disease Research Studies Using Animals

PubMed Central

Colby, Lesley A; Quenee, Lauriane E; Zitzow, Lois A

2017-01-01

Animal models are vital in understanding the transmission and pathogenesis of infectious organisms and the host immune response to infection. In addition, animal models are essential in vaccine and therapeutic drug development and testing. Prior to selecting an animal model to use when studying an infectious agent, the scientific team must determine that sufficient in vitro and ex vivo data are available to justify performing research in an animal model, that ethical considerations are addressed, and that the data generated from animal work will add useful information to the body of scientific knowledge. Once it is established that an animal should be used, the questions become ‘Which animal model is most suitable?’ and ‘Which experimental design issues should be considered?’ The answers to these questions take into account numerous factors, including scientific, practical, welfare, and regulatory considerations, which are the focus of this article. PMID:28662751

Designing for transportation management and operations : a primer.

DOT National Transportation Integrated Search

2013-02-01

This primer is focused on the collaborative and systematic consideration of management and operations during transportation : project design and development. This is termed designing for operations. Effectively designing for operations involves...

Experimental design and quantitative analysis of microbial community multiomics.

PubMed

Mallick, Himel; Ma, Siyuan; Franzosa, Eric A; Vatanen, Tommi; Morgan, Xochitl C; Huttenhower, Curtis

2017-11-30

Studies of the microbiome have become increasingly sophisticated, and multiple sequence-based, molecular methods as well as culture-based methods exist for population-scale microbiome profiles. To link the resulting host and microbial data types to human health, several experimental design considerations, data analysis challenges, and statistical epidemiological approaches must be addressed. Here, we survey current best practices for experimental design in microbiome molecular epidemiology, including technologies for generating, analyzing, and integrating microbiome multiomics data. We highlight studies that have identified molecular bioactives that influence human health, and we suggest steps for scaling translational microbiome research to high-throughput target discovery across large populations.

Analysis and design of the Multimission Modular Spacecraft hydrazine propulsion module

NASA Technical Reports Server (NTRS)

Etheridge, F. G.; Woodruff, W. L.

1978-01-01

The translational velocity increment, stabilization and control requirements, vehicle weight, and geometric considerations of the Multimission Modular Spacecraft (MMS) provided the basic data on which to initiate the analysis and design of the hydrazine propulsion modules. The Landsat D was used as the mission model. Tradeoff studies were conducted on thrust level, thruster location, and clustering arrangement together with tankage volume and location. The impact of the use of single and dual seat thruster valves on plumbing configuration, reliability, and overall system cost was studied in detail. Conceptual designs of a recommended propulsion module configuration for both the Delta 3910 and Shuttle were prepared.

Advanced orbit transfer vehicle propulsion system study

NASA Technical Reports Server (NTRS)

Cathcart, J. A.; Cooper, T. W.; Corringrato, R. M.; Cronau, S. T.; Forgie, S. C.; Harder, M. J.; Mcallister, J. G.; Rudman, T. J.; Stoneback, V. W.

1985-01-01

A reuseable orbit transfer vehicle concept was defined and subsequent recommendations for the design criteria of an advanced LO2/LH2 engine were presented. The major characteristics of the vehicle preliminary design include a low lift to drag aerocapture capability, main propulsion system failure criteria of fail operational/fail safe, and either two main engines with an attitude control system for backup or three main engines to meet the failure criteria. A maintenance and servicing approach was also established for the advanced vehicle and engine concepts. Design tradeoff study conclusions were based on the consideration of reliability, performance, life cycle costs, and mission flexibility.

The VA augmentation and switching treatments for improving depression outcomes (VAST-D) study: Rationale and design considerations.

PubMed

Mohamed, Somaia; Johnson, Gary R; Vertrees, Julia E; Guarino, Peter D; Weingart, Kimberly; Young, Ilanit Tal; Yoon, Jean; Gleason, Theresa C; Kirkwood, Katherine A; Kilbourne, Amy M; Gerrity, Martha; Marder, Stephen; Biswas, Kousick; Hicks, Paul; Davis, Lori L; Chen, Peijun; Kelada, AlexandraMary; Huang, Grant D; Lawrence, David D; LeGwin, Mary; Zisook, Sidney

2015-10-30

Because two-thirds of patients with Major Depressive Disorder do not achieve remission with their first antidepressant, we designed a trial of three "next-step" strategies: switching to another antidepressant (bupropion-SR) or augmenting the current antidepressant with either another antidepressant (bupropion-SR) or with an atypical antipsychotic (aripiprazole). The study will compare 12-week remission rates and, among those who have at least a partial response, relapse rates for up to 6 months of additional treatment. We review seven key efficacy/effectiveness design decisions in this mixed "efficacy-effectiveness" trial. Copyright © 2015. Published by Elsevier Ireland Ltd.

Modelling and simulation of a robotic work cell

NASA Astrophysics Data System (ADS)

Sękala, A.; Gwiazda, A.; Kost, G.; Banaś, W.

2017-08-01

The subject of considerations presented in this work concerns the designing and simulation of a robotic work cell. The designing of robotic cells is the process of synergistic combining the components in the group, combining this groups into specific, larger work units or dividing the large work units into small ones. Combinations or divisions are carried out in the terms of the needs of realization the assumed objectives to be performed in these unit. The designing process bases on the integrated approach what lets to take into consideration all needed elements of this process. Each of the elements of a design process could be an independent design agent which could tend to obtain its objectives.

Scientific, statistical, practical, and regulatory considerations in design space development.

PubMed

Debevec, Veronika; Srčič, Stanko; Horvat, Matej

2018-03-01

The quality by design (QbD) paradigm guides the pharmaceutical industry towards improved understanding of products and processes, and at the same time facilitates a high degree of manufacturing and regulatory flexibility throughout the establishment of the design space. This review article presents scientific, statistical and regulatory considerations in design space development. All key development milestones, starting with planning, selection of factors, experimental execution, data analysis, model development and assessment, verification, and validation, and ending with design space submission, are presented and discussed. The focus is especially on frequently ignored topics, like management of factors and CQAs that will not be included in experimental design, evaluation of risk of failure on design space edges, or modeling scale-up strategy. Moreover, development of a design space that is independent of manufacturing scale is proposed as the preferred approach.

In-flight testing of the space shuttle orbiter thermal control system

NASA Technical Reports Server (NTRS)

Taylor, J. T.

1985-01-01

In-flight thermal control system testing of a complex manned spacecraft such as the space shuttle orbiter and the considerations attendant to the definition of the tests are described. Design concerns, design mission requirements, flight test objectives, crew vehicle and mission risk considerations, instrumentation, data requirements, and real-time mission monitoring are discussed. An overview of the tests results is presented.

Design considerations and strategies for lunar-based observations

NASA Technical Reports Server (NTRS)

Snoddy, William C.; Nein, Max E.; Hilchey, John D.

1994-01-01

This paper addresses the design considerations and strategies for astrophysical observations as key elements of an international solar system exploration program. Emphasis is placed on the technical and programmatic challenges and opportunities associated with an evolving program of lunar-based astronomy. Both robotic and human tended facilities are discussed ranging from relatively small meter-class transit telescopes to large interferometer and filled-aperture systems.

Design Considerations of Polishing Lap for Computer-Controlled Cylindrical Polishing Process

NASA Technical Reports Server (NTRS)

Khan, Gufran S.; Gubarev, Mikhail; Arnold, William; Ramsey, Brian D.

2009-01-01

This paper establishes a relationship between the polishing process parameters and the generation of mid spatial-frequency error. The consideration of the polishing lap design to optimize the process in order to keep residual errors to a minimum and optimization of the process (speeds, stroke, etc.) and to keep the residual mid spatial-frequency error to a minimum, is also presented.

Life sciences payload definition and integration study. Volume 2: Requirements, design, and planning studies for the carry-on laboratories. [for Spacelab

NASA Technical Reports Server (NTRS)

1974-01-01

The task phase concerned with the requirements, design, and planning studies for the carry-on laboratory (COL) began with a definition of biomedical research areas and candidate research equipment, and then went on to develop conceptual layouts for COL which were each evaluated in order to arrive at a final conceptual design. Each step in this design/evaluation process concerned itself with man/systems integration research and hardware, and life support and protective systems research and equipment selection. COL integration studies were also conducted and include attention to electrical power and data management requirements, operational considerations, and shuttle/Spacelab interface specifications. A COL program schedule was compiled, and a cost analysis was finalized which takes into account work breakdown, annual funding, and cost reduction guidelines.

Web-based assessments of physical activity in youth: considerations for design and scale calibration.

PubMed

Saint-Maurice, Pedro F; Welk, Gregory J

2014-12-01

This paper describes the design and methods involved in calibrating a Web-based self-report instrument to estimate physical activity behavior. The limitations of self-report measures are well known, but calibration methods enable the reported information to be equated to estimates obtained from objective data. This paper summarizes design considerations for effective development and calibration of physical activity self-report measures. Each of the design considerations is put into context and followed by a practical application based on our ongoing calibration research with a promising online self-report tool called the Youth Activity Profile (YAP). We first describe the overall concept of calibration and how this influences the selection of appropriate self-report tools for this population. We point out the advantages and disadvantages of different monitoring devices since the choice of the criterion measure and the strategies used to minimize error in the measure can dramatically improve the quality of the data. We summarize strategies to ensure quality control in data collection and discuss analytical considerations involved in group- vs individual-level inference. For cross-validation procedures, we describe the advantages of equivalence testing procedures that directly test and quantify agreement. Lastly, we introduce the unique challenges encountered when transitioning from paper to a Web-based tool. The Web offers considerable potential for broad adoption but an iterative calibration approach focused on continued refinement is needed to ensure that estimates are generalizable across individuals, regions, seasons and countries.

Biocontainment laboratory risk assessment: perspectives and considerations.

PubMed

Patterson, Amy; Fennington, Kelly; Bayha, Ryan; Wax, Diane; Hirschberg, Rona; Boyd, Nancy; Kurilla, Michael

2014-07-01

The ability to respond to public health emergencies involving infectious diseases as well as our ability to adequately prepare for as yet unknown or unrecognized emerging infectious diseases requires suitable facilities within which scientific investigations can take place. To ensure the safe conduct of such investigations so that laboratory workers and the general public are protected from potential consequences of accidental or intentional release of high consequence pathogens, special containment facilities have been designed and constructed. Evaluation of the adequacy of containment for these types of investigations requires a risk assessment (RA) as part of the overall construction project for these types of laboratories. A discussion of the RA process along with considerations that impact the design of such studies and the overall results is presented. Published 2014. This article is a US Government work and is in the public domain in the USA.

Optimization of MLS receivers for multipath environments

NASA Technical Reports Server (NTRS)

Mcalpine, G. A.; Highfill, J. H., III

1976-01-01

The design of a microwave landing system (MLS) aircraft receiver, capable of optimal performance in multipath environments found in air terminal areas, is reported. Special attention was given to the angle tracking problem of the receiver and includes tracking system design considerations, study and application of locally optimum estimation involving multipath adaptive reception and then envelope processing, and microcomputer system design. Results show processing is competitive in this application with i-f signal processing performance-wise and is much more simple and cheaper. A summary of the signal model is given.

Setting Up CD-ROM Work Areas. Part I: Ergonomic Considerations, User Furniture, Location.

ERIC Educational Resources Information Center

Vasi, John; LaGuardia, Cheryl

1992-01-01

The first of a two-part series on design of CD-ROM work areas in libraries discusses (1) space and location considerations; (2) ergonomics, including work surface, chairs, lighting, printers, other accessories, and security; and (3) other considerations, including staff assistance, reference tools, literature racks, and promotional materials. (MES)

Middle-Level Secondary School Leaders: Potential, Constraints and Implications for Leadership Preparation and Development

ERIC Educational Resources Information Center

Gurr, David; Drysdale, Lawrie

2013-01-01

Purpose: The aim of this paper is to bring together for the first time three studies of middle-level leaders in secondary schools in Victoria, Australia. The studies span more than a decade and allow consideration of the progress in developing middle-level leadership roles. Design/methodology/approach: All studies followed a consistent approach…

Degenerate Power in Multilevel Mediation: The Non-Monotonic Relationship between Power & Effect Size

ERIC Educational Resources Information Center

Kelcey, Ben

2015-01-01

Like studies focused on the detection of a main or total effect, a principal consideration in the design of studies examining mediation is the power with which mediation effects can be detected if they exist (e.g., Raudenbush, 1997). However, unlike studies concerning the detection of main effects, literature has not established power formulas for…

Near East and North Africa: A Question Syllabus. Center for Area and Country Studies.

ERIC Educational Resources Information Center

Howard, Harry N.

This study syllabus on the Near East and North Africa is divided into twelve units. Designed to familiarize government personnel assigned to the area with the region and people, each unit consists of a statement of the main objectives to be studied, questions for consideration, and a list of suggested readings from books and periodicals. Units…

Don't fear 'fear conditioning': Methodological considerations for the design and analysis of studies on human fear acquisition, extinction, and return of fear.

PubMed

Lonsdorf, Tina B; Menz, Mareike M; Andreatta, Marta; Fullana, Miguel A; Golkar, Armita; Haaker, Jan; Heitland, Ivo; Hermann, Andrea; Kuhn, Manuel; Kruse, Onno; Meir Drexler, Shira; Meulders, Ann; Nees, Frauke; Pittig, Andre; Richter, Jan; Römer, Sonja; Shiban, Youssef; Schmitz, Anja; Straube, Benjamin; Vervliet, Bram; Wendt, Julia; Baas, Johanna M P; Merz, Christian J

2017-06-01

The so-called 'replicability crisis' has sparked methodological discussions in many areas of science in general, and in psychology in particular. This has led to recent endeavours to promote the transparency, rigour, and ultimately, replicability of research. Originating from this zeitgeist, the challenge to discuss critical issues on terminology, design, methods, and analysis considerations in fear conditioning research is taken up by this work, which involved representatives from fourteen of the major human fear conditioning laboratories in Europe. This compendium is intended to provide a basis for the development of a common procedural and terminology framework for the field of human fear conditioning. Whenever possible, we give general recommendations. When this is not feasible, we provide evidence-based guidance for methodological decisions on study design, outcome measures, and analyses. Importantly, this work is also intended to raise awareness and initiate discussions on crucial questions with respect to data collection, processing, statistical analyses, the impact of subtle procedural changes, and data reporting specifically tailored to the research on fear conditioning. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Multiobjective optimisation design for enterprise system operation in the case of scheduling problem with deteriorating jobs

NASA Astrophysics Data System (ADS)

Wang, Hongfeng; Fu, Yaping; Huang, Min; Wang, Junwei

2016-03-01

The operation process design is one of the key issues in the manufacturing and service sectors. As a typical operation process, the scheduling with consideration of the deteriorating effect has been widely studied; however, the current literature only studied single function requirement and rarely considered the multiple function requirements which are critical for a real-world scheduling process. In this article, two function requirements are involved in the design of a scheduling process with consideration of the deteriorating effect and then formulated into two objectives of a mathematical programming model. A novel multiobjective evolutionary algorithm is proposed to solve this model with combination of three strategies, i.e. a multiple population scheme, a rule-based local search method and an elitist preserve strategy. To validate the proposed model and algorithm, a series of randomly-generated instances are tested and the experimental results indicate that the model is effective and the proposed algorithm can achieve the satisfactory performance which outperforms the other state-of-the-art multiobjective evolutionary algorithms, such as nondominated sorting genetic algorithm II and multiobjective evolutionary algorithm based on decomposition, on all the test instances.

Barriers and Facilitators to Deaf Trauma Survivors' Help-Seeking Behavior: Lessons for Behavioral Clinical Trials Research.

PubMed

Anderson, Melissa L; Wolf Craig, Kelly S; Ziedonis, Douglas M

2017-01-01

Deaf individuals experience significant obstacles to participating in behavioral health research when careful consideration is not given to accessibility during the design of study methodology. To inform such considerations, we conducted an exploratory secondary analysis of a mixed-methods study that originally explored 16 Deaf trauma survivors' help-seeking experiences. Our objective was to identify key findings and qualitative themes from consumers' own words that could be applied to the design of behavioral clinical trials methodology. In many ways, the themes that emerged were not wholly dissimilar from the general preferences of members of other sociolinguistic minority groups-a need for communication access, empathy, respect, strict confidentiality procedures, trust, and transparency of the research process. Yet, how these themes are applied to the inclusion of Deaf research participants is distinct from any other sociolinguistic minority population, given Deaf people's unique sensory and linguistic characteristics. We summarize our findings in a preliminary "Checklist for Designing Deaf Behavioral Clinical Trials" to operationalize the steps researchers can take to apply Deaf-friendly approaches in their empirical work. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The implementation of the integrated design process in the hole-plan system

NASA Astrophysics Data System (ADS)

Ruy, Won-Sun; Ko, Dae-Eun; Yang, Young-Soon

2012-12-01

All current shipyards are using the customized CAD/CAM programs in order to improve the design quality and increase the design efficiency. Even though the data structures for ship design and construction are almost completed, the implementation related to the ship design processes are still in progress so that it has been the main causes of the bottleneck and delay during the middle of design process. In this study, we thought that the hole-plan system would be a good example which is remained to be improved. The people of outfitting division who don't have direct authority to edit the structural panels, should request the hull design division to install the holes for the outfitting equipment. For acceptance, they should calculate the hole position, determine the hole type, and find the intersected contour of panel. After consideration of the hull people, the requested holes are manually installed on the hull structure. As the above, many processes are needed such as communication and discussion between the divisions, drawings for hole-plan, and the consideration for the structural or production compatibility. However this iterative process takes a lot of working time and requires mental pressure to the related people and cross-division conflict. This paper will handle the hole-plan system in detail to automate the series of process and minimize the human efforts and time-consumption.

The Cam Shell: An Innovative Design With Materials and Manufacturing

NASA Technical Reports Server (NTRS)

Chung, W. Richard; Larsen, Frank M.; Kornienko, Rob

2003-01-01

Most of the personal audio and video recording devices currently sold on the open market all require hands to operate. Little consideration was given to designing a hands-free unit. Such a system once designed and made available to the public could greatly benefit mobile police officers, bicyclists, adventurers, street and dirt motorcyclists, horseback riders and many others. With a few design changes water sports and skiing activities could be another large area of application. The cam shell is an innovative design in which an audio and video recording device (such as palm camcorder) is housed in a body-mounted protection system. This system is based on the concept of viewing and recording at the same time. A view cam is attached to a helmet wired to a recording unit encased in a transparent body-mounted protection system. The helmet can also be controlled by remote. The operator will have full control in recording everything. However, the recording unit will be operated completely hands-free. This project will address the design considerations and their effects on material selection and manufacturing. It will enhance the understanding of the structure of materials, and how the structure affects the behavior of the material, and the role that processing play in linking the relationship between structure and properties. A systematic approach to design feasibility study, cost analysis and problem solving will also be discussed.

Considerations for high occupancy vehicle (HOV) to high occupancy toll (HOT) lanes conversions guidebook.

DOT National Transportation Integrated Search

2007-06-01

The intent of this study is to explore the planning, design, and ongoing operation and maintenance of HOT facilities and to provide lessons learned and applicable technical guidance that will assist the state and local transportation planners and des...

Energy monitoring in gins

USDA-ARS?s Scientific Manuscript database

Energy costs are the second largest source of variable costs for cotton gins, accounting for 27% of variable costs. Energy use has typically not been a major consideration in gin design, and previous studies of energy use have utilized instantaneous readings or aggregated season-long values. In this...

Energy Monitoring in Gins - 2011

USDA-ARS?s Scientific Manuscript database

Energy costs are the second largest source of variable costs for gins, accounting for 27% of variable costs. Energy use has typically not been a major consideration in gin design and previous studies of energy use have utilized instantaneous readings or aggregated season-long values. Electricity u...

Electricity use patterns in cotton gins

USDA-ARS?s Scientific Manuscript database

Energy costs are the second largest source of variable costs for cotton gins, with electricity accounting for 18% of variable costs. Energy use has typically not been a major consideration in gin design and previous studies of energy use have utilized instantaneous readings or aggregated season-lon...

Effect of Changing the Center of Gravity on Human Performance in Simulated Lunar Gravity

NASA Technical Reports Server (NTRS)

Chappell, Steven P.; Norcross, Jason R.; Gernhardt, Michael L.

2010-01-01

The presentation slides include: Moving Past Apollo, Testing in Analog Environments, NEEMO/NBL CG (center of gravity) Studies, Center of Gravity Test Design and Methods, CG Suited Locations and Results, CG Individual Considerations, CG Shirt-Sleeve Locations and Results.

Preliminary design of a supersonic Short Takeoff and Vertical Landing (STOVL) fighter aircraft

NASA Technical Reports Server (NTRS)

Cox, Brian; Borchers, Paul; Gomer, Charlie; Henderson, Dean; Jacobs, Tavis; Lawson, Todd; Peterson, Eric; Ross, Tweed, III; Bellmard, Larry

1990-01-01

The preliminary design study of a supersonic Short Takeoff and Vertical Landing (STOVL) fighter is presented. A brief historical survey of powered lift vehicles was presented, followed by a technology assessment of the latest supersonic STOVL engine cycles under consideration by industry and government in the U.S. and UK. A survey of operational fighter/attack aircraft and the modern battlefield scenario were completed to develop, respectively, the performance requirements and mission profiles for the study. Three configurations were initially investigated with the following engine cycles: a hybrid fan vectored thrust cycle, a lift+lift/cruise cycle, and a mixed flow vectored thrust cycle. The lift+lift/cruise aircraft configuration was selected for detailed design work which consisted of: (1) a material selection and structural layout, including engine removal considerations, (2) an aircraft systems layout, (3) a weapons integration model showing the internal weapons bay mechanism, (4) inlet and nozzle integration, (5) an aircraft suckdown prediction, (6) an aircraft stability and control analysis, including a takeoff, hover, and transition control analysis, (7) a performance and mission capability study, and (8) a life cycle cost analysis. A supersonic fighter aircraft with STOVL capability with the lift+lift/cruise engine cycle seems a viable option for the next generation fighter.

Considerations of study design.

PubMed

Koretz, Ronald L

2007-12-01

Research projects attempt to answer specific questions. The particular study design that is selected will depend in large measure on the nature of the question and the time and resources available. There are 5 common categories of clinical questions; they relate to etiology, prognosis, utility of diagnostic tests, efficacy of proposed interventions, and cost of treatment in specific disease states. A number of study designs can be used. Case reports serve to memorialize unusual or novel aspects of diseases. Retrospective case series are useful for defining natural history. Case-control studies are used by epidemiologists to elucidate potential etiologies of diseases. Prospective cohort studies can be used to assess natural history or to assess potential disease etiologies. Controlled trials are designed to assess the efficacy of therapeutic interventions. Studies that define the sensitivity and specificity of diagnostic tests can be used to assess the utility of those tests. Economic analyses estimate the costs that particular diseases or therapies will require. Each of these study designs has limitations; with the exception of high-quality randomized trials, none of these study designs can establish a causative relationship between putative etiologic (or therapeutic) factors and disease (outcomes).

Thinking outside the ROCs: Designing decorrelated taggers (DDT) for jet substructure

DOE PAGES

Dolen, James; Harris, Philip; Marzani, Simone; ...

2016-05-26

Here, we explore the scale-dependence and correlations of jet substructure observables to improve upon existing techniques in the identification of highly Lorentz-boosted objects. Modified observables are designed to remove correlations from existing theoretically well-understood observables, providing practical advantages for experimental measurements and searches for new phenomena. We study such observables in W jet tagging and provide recommendations for observables based on considerations beyond signal and background efficiencies.

Do childhood vaccines have non-specific effects on mortality?

PubMed Central

Cooper, William O.; Boyce, Thomas G.; Wright, Peter F.; Griffin, Marie R.

2003-01-01

A recent article by Kristensen et al. suggested that measles vaccine and bacille Calmette-Gu rin (BCG) vaccine might reduce mortality beyond what is expected simply from protection against measles and tuberculosis. Previous reviews of the potential effects of childhood vaccines on mortality have not considered methodological features of reviewed studies. Methodological considerations play an especially important role in observational assessments, in which selection factors for vaccination may be difficult to ascertain. We reviewed 782 English language articles on vaccines and childhood mortality and found only a few whose design met the criteria for methodological rigor. The data reviewed suggest that measles vaccine delivers its promised reduction in mortality, but there is insufficient evidence to suggest a mortality benefit above that caused by its effect on measles disease and its sequelae. Our review of the available data in the literature reinforces how difficult answering these considerations has been and how important study design will be in determining the effect of specific vaccines on all-cause mortality. PMID:14758409

Study of percolation behavior depending on molecular structure design

NASA Astrophysics Data System (ADS)

Yu, Ji Woong; Lee, Won Bo

Each differently designed anisotropic nano-crystals(ANCs) are studied using Langevin dynamic simulation and their percolation behaviors are presented. Popular molecular dynamics software LAMMPS was used to design the system and perform the simulation. We calculated the minimum number density at which percolation occurs(i.e. percolation threshold), radial distribution function, and the average number of ANCs for a cluster. Electrical conductivity is improved when the number of transfers of electrons between ANCs, so called ''inter-hopping process'', which has the considerable contribution to resistance decreases and the number of inter-hopping process is directly related with the concentration of ANCs. Therefore, with the investigation of relationship between molecular architecture and percolation behavior, optimal design of ANC can be achieved.

Enhanced avatar design using cognitive map-based simulation.

PubMed

Lee, Kun Chang; Moon, Byung Suk

2007-12-01

With the advent of the Internet era and the maturation of electronic commerce, strategic avatar design has become an important way of keeping up with market changes and customer tastes. In this study, we propose a new approach to an adaptive avatar design that uses cognitive map (CM) as a what-if simulation vehicle. The main virtue of the new design is its ability to change specific avatar design features with objective consideration of the subsequent effects upon other design features, thereby enhancing user satisfaction. Statistical analyses of focus group interview results with a group of experts majoring in avatars and CM showed that our proposed approach could be used to effectively analyze avatar design in an adaptive and practical manner when the market situation is changing.

Procedure for developing experimental designs for accelerated tests for service-life prediction. [for solar cell modules

NASA Technical Reports Server (NTRS)

Thomas, R. E.; Gaines, G. B.

1978-01-01

Recommended design procedures to reduce the complete factorial design by retaining information on anticipated important interaction effects, and by generally giving up information on unconditional main effects are discussed. A hypothetical photovoltaic module used in the test design is presented. Judgments were made of the relative importance of various environmental stresses such as UV radiation, abrasion, chemical attack, temperature, mechanical stress, relative humidity and voltage. Consideration is given to a complete factorial design and its graphical representation, elimination of selected test conditions, examination and improvement of an engineering design, and parametric study. The resulting design consists of a mix of conditional main effects and conditional interactions and represents a compromise between engineering and statistical requirements.

Fast-acting sprinkler system design considerations for propellant manufacture

NASA Astrophysics Data System (ADS)

Matthews, A. L.; Crable, J. M.; Kristoff, P. T.

1984-08-01

Fast-acting sprinkler systems for detection and suppression of fires in propellant operations, which require activation in the millisecond range in order to be effective, can be easily defeated unless particular attention is paid to design and maintenance details. Of primary consideration are detector selection and placement in processes to minimize the effect of environmental influences. Also important are nozzle placement, water flow density, water supply pressure, and pattern and sloping of piping. When all of these design criteria are properly implemented, water application can occur within 100 ms of fire detection.

Low-cost, high-resolution, single-structure array telescopes for imaging of low-earth-orbit satellites

NASA Technical Reports Server (NTRS)

Massie, N. A.; Oster, Yale; Poe, Greg; Seppala, Lynn; Shao, Mike

1992-01-01

Telescopes that are designed for the unconventional imaging of near-earth satellites must follow unique design rules. The costs must be reduced substantially over those of the conventional telescope designs, and the design must accommodate a technique to circumvent atmospheric distortion of the image. Apertures of 12 m and more along with altitude-altitude mounts that provide high tracking rates are required. A novel design for such a telescope, optimized for speckle imaging, has been generated. Its mount closely resembles a radar mount, and it does not use the conventional dome. Costs for this design are projected to be considerably lower than those for the conventional designs. Results of a design study are presented with details of the electro-optical and optical designs.

Design and fabrication considerations for stainless steel liquid helium jackets surrounding SCRF cavities

NASA Astrophysics Data System (ADS)

Bonnema, E. C.; Cunningham, E. K.; Rumel, J. D.

2014-01-01

The Department of Energy requires its subcontractors to meet 10 CFR 851 Appendix A Part 4 for all new pressure vessels and pressure piping. The stainless steel pressure vessel boundaries surrounding SCRF cavities fall under this requirement. Methods for meeting this requirement include design and fabrication of the pressure vessels to meet the requirements of the ASME Boiler & Pressure Vessel Code Section VIII Division 1 or Division 2. Design considerations include determining whether the configuration of the SCRF cavity can be accommodated under the rules of Division 1 or must be analyzed under Division 2 Part 4 Design by Rule Requirements or Part 5 Design by Analysis Requirements. Regardless of the Division or Part choice, designers will find the rules of the ASME Code require thicker pressure boundary members, larger welds, and additional non-destructive testing and quality assurance requirements. These challenges must be met and overcome by the fabricator through the development of robust, detailed, and repeatable manufacturing processes. In this paper we discuss the considerations for stainless steel pressure vessels that must meet the ASME Code and illustrate the discussion with examples from direct experience fabricating such vessels.

Boeing flight deck design philosophy

NASA Technical Reports Server (NTRS)

Stoll, Harty

1990-01-01

Information relative to Boeing flight deck design philosophy is given in viewgraph form. Flight deck design rules, design considerations, functions allocated to the crew, redundancy and automation concerns, and examples of accident data that were reviewed are listed.

Systems integration studies for supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

Mascitti, V. R.

1975-01-01

Technical progress in each of the disciplinary research areas affecting the design of supersonic cruise aircraft is discussed. The NASA AST/SCAR Program supported the integration of these technical advances into supersonic cruise aircraft configuration concepts. While the baseline concepts reflect differing design philosophy, all reflect a level of economic performance considerably above the current foreign aircraft as well as the former U.S. SST. Range-payload characteristics of the study configurating show significant improvement, while meeting environmental goals such as takeoff and landing noise and upper atmospheric pollution.

Does facilitated Advance Care Planning reduce the costs of care near the end of life? Systematic review and ethical considerations.

PubMed

Klingler, Corinna; in der Schmitten, Jürgen; Marckmann, Georg

2016-05-01

While there is increasing evidence that Advance Care Planning has the potential to strengthen patient autonomy and improve quality of care near the end of life, it remains unclear whether it could also reduce net costs of care. This study aims to describe the cost implications of Advance Care Planning programmes and discusses ethical conflicts arising in this context. We conducted a systematic review based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. We systematically searched the databases PubMed, NHS EED, EURONHEED, Cochrane Library and EconLit. We included empirical studies (no limitation to study type) that investigated the cost implications of Advance Care Planning programmes involving professionally facilitated end-of-life discussions. Seven studies met our inclusion criteria. Four of them used a randomised controlled design, one used a before-after design and two were observational studies. Six studies found reductions in costs of care ranging from USD1041 to USD64,827 per patient, depending on the study period and the cost measurement. One study detected no differences in costs. Studies varied considerably regarding the Advance Care Planning intervention, patient selection and costs measured which may explain some of the variations in findings. Looking at the impact of Advance Care Planning on costs raises delicate ethical issues. Given the increasing pressure to reduce expenditures, there may be concerns that cost considerations could unduly influence the sensitive communication process, thus jeopardising patient autonomy. Safeguards are proposed to reduce these risks. The limited data indicate net cost savings may be realised with Advance Care Planning. Methodologically robust trials with clearly defined Advance Care Planning interventions are needed to make the costs and returns of Advance Care Planning transparent. © The Author(s) 2015.

On the proper study design applicable to experimental balneology.

PubMed

Varga, Csaba

2016-08-01

The simple message of this paper is that it is the high time to reevaluate the strategies and optimize the efforts for investigation of thermal (spa) waters. Several articles trying to clear mode of action of medicinal waters have been published up to now. Almost all studies apply the unproven hypothesis, namely the inorganic ingredients are in close connection with healing effects of bathing. Change of paradigm would be highly necessary in this field taking into consideration the presence of several biologically active organic substances in these waters. A successful design for experimental mechanistic studies is approved.

Assessment, design and control strategy development of a fuel cell hybrid electric vehicle for CSU's EcoCAR

NASA Astrophysics Data System (ADS)

Fox, Matthew D.

Advanced automotive technology assessment and powertrain design are increasingly performed through modeling, simulation, and optimization. But technology assessments usually target many competing criteria making any individual optimization challenging and arbitrary. Further, independent design simulations and optimizations take considerable time to execute, and design constraints and objectives change throughout the design process. Changes in design considerations usually require re-processing of simulations and more time. In this thesis, these challenges are confronted through CSU's participation in the EcoCAR2 hybrid vehicle design competition. The complexity of the competition's design objectives leveraged development of a decision support system tool to aid in multi-criteria decision making across technologies and to perform powertrain optimization. To make the decision support system interactive, and bypass the problem of long simulation times, a new approach was taken. The result of this research is CSU's architecture selection and component sizing, which optimizes a composite objective function representing the competition score. The selected architecture is an electric vehicle with an onboard range extending hydrogen fuel cell system. The vehicle has a 145kW traction motor, 18.9kWh of lithium ion battery, a 15kW fuel cell system, and 5kg of hydrogen storage capacity. Finally, a control strategy was developed that improves the vehicles performance throughout the driving range under variable driving conditions. In conclusion, the design process used in this research is reviewed and evaluated against other common design methodologies. I conclude, through the highlighted case studies, that the approach is more comprehensive than other popular design methodologies and is likely to lead to a higher quality product. The upfront modeling work and decision support system formulation will pay off in superior and timely knowledge transfer and more informed design decisions. The hypothesis is supported by the three case studies examined in this thesis.

Engineering study on the rotary-vee engine concept

NASA Technical Reports Server (NTRS)

Willis, Edward A.; Bartland, Timothy A.; Beard, John E.

1989-01-01

This paper provides a review of the applicable thermodynamic cycle and performance considerations when the rotary-vee mechanism is used as an internal combustion (IC) heat engine. Included is a simplified kinematic analysis and studies of the effects of design parameters on the critical pressures, torques and parasitic losses. A discussion of the principal findings is presented.

Predicting Academics' Willingness to Participate in Peer Review of Teaching: A Quantitative Investigation

ERIC Educational Resources Information Center

White, Kiri; Boehm, Emilia; Chester, Andrea

2014-01-01

Peer review of teaching is a collegial process designed to help academics reflect on and improve their teaching practice. Considerable research supports the value of peer review of teaching. However, uptake of voluntary programs is typically low. Few studies have examined the predictors of engagement in voluntary peer review. This study surveyed…

Accessibility Considerations for e-Learning in Ghana

ERIC Educational Resources Information Center

Boateng, John Kwame

2016-01-01

This paper reports on a study that explored the best ways to design e-learning in order to provide better access for adult learners with disabilities. Two districts from the Central Region of Ghana were selected and two major research questions guided the study. The five-point Likert scale was employed between May and August of 2014. The two…

Self-Instructional Module Based on Cognitive Load Theory: A Study on Information Retention among Trainee Teachers

ERIC Educational Resources Information Center

Ong, Chiek Pin; Tasir, Zaidatun

2015-01-01

The aim of the research is to study the information retention among trainee teachers using a self-instructional printed module based on Cognitive Load Theory for learning spreadsheet software. Effective pedagogical considerations integrating the theoretical concepts related to cognitive load are reflected in the design and development of the…

Considerations of Numbers Used in Tasks for Promoting Multiplicative Reasoning in Students with Learning Difficulties in Mathematics

ERIC Educational Resources Information Center

Risley, Rachael Ann

2016-01-01

This study explored the impact of numbers used in instructional tasks on the construction and generalization of multiplicative reasoning by fourth grade students designated as having learning difficulties or disabilities in mathematics (SLDs). In particular, this study addressed the following research questions: (1) In what ways do SLDs'…

Professional Development Design Considerations in Climate Change Education: Teacher Enactment and Student Learning

ERIC Educational Resources Information Center

Drewes, Andrea; Henderson, Joseph; Mouza, Chrystalla

2018-01-01

Climate change is one of the most pressing challenges facing society, and climate change educational models are emerging in response. This study investigates the implementation and enactment of a climate change professional development (PD) model for science educators and its impact on student learning. Using an intrinsic case study methodology,…

Humorous Videos and Idiom Achievement: Some Pedagogical Considerations for EFL Learners

ERIC Educational Resources Information Center

Neissari, Malihe; Ashraf, Hamid; Ghorbani, Mohammad Reza

2017-01-01

Employing a quasi-experimental design, this study examined the efficacy of humorous idiom video clips on the achievement of Iranian undergraduate students studying English as a Foreign Language (EFL). Forty humorous video clips from the English Idiom Series called "The Teacher" from the BBC website were used to teach 120 idioms to 61…

Nursing Professionals' Evaluation in Integrating the Computers in English for Nursing Purposes (ENP) Instruction and Learning

ERIC Educational Resources Information Center

Yu, Wei-Chieh Wayne

2013-01-01

This study was designed to examine the pre- and in-service nursing professionals' perceptions of using computers to facilitate foreign language learning as consideration for future English for nursing purposes instruction. One hundred and ninety seven Taiwanese nursing students participated in the study. Findings revealed that (1) the participants…

Toward the Long-Term Scientific Study of Encounter Group Phenomena: I. Methodological Considerations.

ERIC Educational Resources Information Center

Diamond, Michael Jay; Shapiro, Jerrold Lee

This paper proposes a model for the long-term scientific study of encounter, T-, and sensitivity groups. The authors see the need for overcoming major methodological and design inadequacies of such research. They discuss major methodological flaws in group outcome research as including: (1) lack of adequate base rate or pretraining measures; (2)…

Configuration design studies and wind tunnel tests of an energy efficient transport with a high-aspect-ratio supercritical wing

NASA Technical Reports Server (NTRS)

Henne, P. A.; Dahlin, J. A.; Peavey, C. C.; Gerren, D. S.

1982-01-01

The results of design studies and wind tunnel tests of high aspect ratio supercritical wings suitable for a medium range, narrow body transport aircraft flying near M=0.80 were presented. The basic characteristics of the wing design were derived from system studies of advanced transport aircraft where detailed structural and aerodynamic tradeoffs were used to determine the most optimum design from the standpoint of fuel usage and direct operating cost. These basic characteristics included wing area, aspect ratio, average thickness, and sweep. The detailed wing design was accomplished through application of previous test results and advanced computational transonic flow procedures. In addition to the basic wing/body development, considerable attention was directed to nacelle/plyon location effects, horizontal tail effects, and boundary layer transition effects. Results of these tests showed that the basic cruise performance objectives were met or exceeded.

Designing Instructional Materials: Some Guidelines.

ERIC Educational Resources Information Center

Burbank, Lucille; Pett, Dennis

Guidelines for the design of instructional materials are outlined in this paper. The principles of design are presented in five major categories: (1) general design (structural appeal and personal appeal); (2) instructional design (attention, memory, concept learning, and attitude change); (3) visual design (media considerations, pictures, graphs…

Relationships between objective acoustic indices and acoustic comfort evaluation in nonacoustic spaces

NASA Astrophysics Data System (ADS)

Kang, Jian

2004-05-01

Much attention has been paid to acoustic spaces such as concert halls and recording studios, whereas research on nonacoustic buildings/spaces has been rather limited, especially from the viewpoint of acoustic comfort. In this research a series of case studies has been carried out on this topic, considering various spaces including shopping mall atrium spaces, library reading rooms, football stadia, swimming spaces, churches, dining spaces, as well as urban open public spaces. The studies focus on the relationships between objective acoustic indices such as sound pressure level and reverberation time and perceptions of acoustic comfort. The results show that the acoustic atmosphere is an important consideration in such spaces and the evaluation of acoustic comfort may vary considerably even if the objective acoustic indices are the same. It is suggested that current guidelines and technical regulations are insufficient in terms of acoustic design of these spaces, and the relationships established from the case studies between objective and subjective aspects would be useful for developing further design guidelines. [Work supported partly by the British Academy.

Initial MPTS study results: Design considerations and issues

NASA Astrophysics Data System (ADS)

Maynard, O. E.

1980-12-01

One of the key issues identified during investigations of microwave power transmission systems from 1965 to 1976 was the need to assure that the billions of diodes on ground-based rectennas are sufficiently reliable to support long life times of approximately 30 years. Major systems studies conducted focused on waveguides; radio frequency interference and biological considerations; the relationship between performance, weight, and cost; risk assessment; crossed field directional amplifier noise; a 48 kW klystron; effects of the environment on propagation and phase control; rectenna technology; a rationale for the ground power density region; alternate technologies for orbital assembly; ionospheric effects and phase control; and reception conversion (rf to dc collector/converter).

Considerations for high occupancy vehicle (HOV) lane to high occupancy toll (HOT) lane conversions guidebook

DOT National Transportation Integrated Search

2007-06-01

The intent of this study is to explore the planning, design, and ongoing operation and maintenance of HOT facilities and to provide lessons learned and applicable technical guidance that will assist the state and local transportation planners and des...

Faculty Perceptions of Online Accounting Coursework

ERIC Educational Resources Information Center

Grossman, Amanda M.; Johnson, Leigh R.

2015-01-01

The perceptions of faculty members, who design and evaluate online accounting coursework content, are an important consideration in determining the quality inherent in such content. This study reports the results of a survey which examines accounting faculty members' attitudes towards online education (measured as their willingness to accept…

Advancing High-Quality Literacy Research in Juvenile Justice: Methodological and Practical Considerations

ERIC Educational Resources Information Center

Houchins, David E.; Jolivette, Kristine; Shippen, Margaret E.; Lambert, Richard

2010-01-01

Special education researchers have made noteworthy progress toward conceptualizing literacy research questions, designing quality studies, and disseminating the results of their research. These advancements have been made through the establishment and refinement of quality research indicators. Unfortunately, this progress has mostly eluded the…

Preservice Music Teachers' Employment Preferences: Consideration Factors

ERIC Educational Resources Information Center

Robinson, Nicole R.

2012-01-01

This study was designed to investigate preservice music teachers' (N = 187) perceptions of employment preferences when considering future teaching positions. Adaptive Conjoint Analysis, a business market-based research tool, was used to determine preferences for personal factors (e.g., salary, commute), school environmental factors (e.g.,…

Manpower/Hardware Life Cycle Cost Analysis Study.

DTIC Science & Technology

1979-11-06

designer will begin to learn, on a subconscious level, about the likely outcome of tradeoffs. At the high rate of use expected for these machines, he...one requiring considerable cost analytic expertise), and the model must be redocumented and partially or completely reprogrammed . All this is extremely

Reliability Considerations for the Operation of Large Accelerator User Facilities

DOE PAGES

Willeke, F. J.

2016-01-29

The lecture provides an overview of considerations relevant for achieving highly reliable operation of accelerator based user facilities. The article starts with an overview of statistical reliability formalism which is followed by high reliability design considerations with examples. Finally, the article closes with operational aspects of high reliability such as preventive maintenance and spares inventory.

How to Study Chronic Diseases-Implications of the Convention on the Rights of Persons with Disabilities for Research Designs.

PubMed

von Peter, Sebastian; Bieler, Patrick

2017-01-01

The Convention on the Rights of Persons with Disabilities (CRPD) has been received considerable attention internationally. The Convention's main arguments are conceptually analyzed. Implications for the development of research designs are elaborated upon. The Convention entails both a human rights and a sociopolitical dimension. Advancing a relational notion of disability, it enters a rather foreign terrain to medical sciences. Research designs have to be changed accordingly. Research designs in accordance with the CRPD should employ and further develop context-sensitive research strategies and interdisciplinary collaboration. Complex designs that allow for a relational analysis of personalized effects have to be established and evaluated, thereby systematically integrating qualitative methods.

A revolutionary approach to composite construction and flight management systems for small, general aviation airplanes

NASA Technical Reports Server (NTRS)

Roskam, Jan; Wenninger, ED

1992-01-01

The design studies for two composite general aviation airplanes are presented. The main consideration for both of the designs was to avoid the typical 'metal replacement' philosophy that has hindered the widespread use of composites in general aviation aircraft. The first design is for a low wing aircraft based on the Smith Aircraft Corporation GT-3 Global Trainer. The second aircraft is a composite version of the Cessna 152. The project was conducted as a graduate level design class under the auspices of the KU/NASA/USRA Advanced Design Program in aeronautics. The results obtained from the Fall semester of 1991 and the Spring semester of 1992 are presented.

Study design elements for rigorous quasi-experimental comparative effectiveness research.

PubMed

Maciejewski, Matthew L; Curtis, Lesley H; Dowd, Bryan

2013-03-01

Quasi-experiments are likely to be the workhorse study design used to generate evidence about the comparative effectiveness of alternative treatments, because of their feasibility, timeliness, affordability and external validity compared with randomized trials. In this review, we outline potential sources of discordance in results between quasi-experiments and experiments, review study design choices that can improve the internal validity of quasi-experiments, and outline innovative data linkage strategies that may be particularly useful in quasi-experimental comparative effectiveness research. There is an urgent need to resolve the debate about the evidentiary value of quasi-experiments since equal consideration of rigorous quasi-experiments will broaden the base of evidence that can be brought to bear in clinical decision-making and governmental policy-making.

Development of LC-13C NMR

NASA Technical Reports Server (NTRS)

Dorn, H. C.; Wang, J. S.; Glass, T. E.

1986-01-01

This study involves the development of C-13 nuclear resonance as an on-line detector for liquid chromatography (LC-C-13 NMR) for the chemical characterization of aviation fuels. The initial focus of this study was the development of a high sensitivity flow C-13 NMR probe. Since C-13 NMR sensitivity is of paramount concern, considerable effort during the first year was directed at new NMR probe designs. In particular, various toroid coil designs were examined. In addition, corresponding shim coils for correcting the main magnetic field (B sub 0) homogeneity were examined. Based on these initial probe design studies, an LC-C-13 NMR probe was built and flow C-13 NMR data was obtained for a limited number of samples.

Mixed methods research: a design for emergency care research?

PubMed

Cooper, Simon; Porter, Jo; Endacott, Ruth

2011-08-01

This paper follows previous publications on generic qualitative approaches, qualitative designs and action research in emergency care by this group of authors. Contemporary views on mixed methods approaches are considered, with a particular focus on the design choice and the amalgamation of qualitative and quantitative data emphasising the timing of data collection for each approach, their relative 'weight' and how they will be mixed. Mixed methods studies in emergency care are reviewed before the variety of methodological approaches and best practice considerations are presented. The use of mixed methods in clinical studies is increasing, aiming to answer questions such as 'how many' and 'why' in the same study, and as such are an important and useful approach to many key questions in emergency care.

Measuring safety climate in health care.

PubMed

Flin, R; Burns, C; Mearns, K; Yule, S; Robertson, E M

2006-04-01

To review quantitative studies of safety climate in health care to examine the psychometric properties of the questionnaires designed to measure this construct. A systematic literature review was undertaken to study sample and questionnaire design characteristics (source, no of items, scale type), construct validity (content validity, factor structure and internal reliability, concurrent validity), within group agreement, and level of analysis. Twelve studies were examined. There was a lack of explicit theoretical underpinning for most questionnaires and some instruments did not report standard psychometric criteria. Where this information was available, several questionnaires appeared to have limitations. More consideration should be given to psychometric factors in the design of healthcare safety climate instruments, especially as these are beginning to be used in large scale surveys across healthcare organisations.

Universal Design: Process, Principles, and Applications

ERIC Educational Resources Information Center

Burgstahler, Sheryl

2009-01-01

Designing any product or environment involves the consideration of many factors, including aesthetics, engineering options, environmental issues, safety concerns, industry standards, and cost. Typically, designers focus their attention on the average user. In contrast, universal design (UD), according to the Center for Universal Design," is…

Design and validation of instruments to measure knowledge.

PubMed

Elliott, T E; Regal, R R; Elliott, B A; Renier, C M

2001-01-01

Measuring health care providers' learning after they have participated in educational interventions that use experimental designs requires valid, reliable, and practical instruments. A literature review was conducted. In addition, experience gained from designing and validating instruments for measuring the effect of an educational intervention informed this process. The eight main steps for designing, validating, and testing the reliability of instruments for measuring learning outcomes are presented. The key considerations and rationale for this process are discussed. Methods for critiquing and adapting existent instruments and creating new ones are offered. This study may help other investigators in developing valid, reliable, and practical instruments for measuring the outcomes of educational activities.

Design considerations for attaining 250-knot test velocities at the aircraft landing dynamics facility

NASA Technical Reports Server (NTRS)

Gray, C. E., Jr.; Snyder, R. E.; Taylor, J. T.; Cires, A.; Fitzgerald, A. L.; Armistead, M. F.

1980-01-01

Preliminary design studies are presented which consider the important parameters in providing 250 knot test velocities at the Aircraft Landing Dynamics Facility. Four major components of this facility are: the hydraulic jet catapult, the test carriage structure, the reaction turning bucket, and the wheels. Using the hydraulic-jet catapult characteristics, a target design point was selected and a carriage structure was sized to meet the required strength requirements. The preliminary design results indicate that to attain 250 knot test velocities for a given hydraulic jet catapult system, a carriage mass of 25,424 kg (56,000 lbm.) cannot be exceeded.

Ambient response of a unique performance-based design building with dynamic response modification features

USGS Publications Warehouse

Çelebi, Mehmet; Huang, Moh; Shakal, Antony; Hooper, John; Klemencic, Ron

2012-01-01

A 64-story, performance-based design building with reinforced concrete core shear-walls and unique dynamic response modification features (tuned liquid sloshing dampers and buckling-restrained braces) has been instrumented with a monitoring array of 72 channels of accelerometers. Ambient vibration data recorded are analyzed to identify modes and associated frequencies and damping. The low-amplitude dynamic characteristics are considerably different than those computed from design analyses, but serve as a baseline against which to compare with future strong shaking responses. Such studies help to improve our understanding of the effectiveness of the added features to the building and help improve designs in the future.

Development of the Second-Generation Oscillating Surge Wave Energy Converter with Variable Geometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tom, Nathan M; Yu, Yi-Hsiang; Thresher, Robert W

This study investigates the effect of design changes on the hydrodynamics of a novel oscillating surge wave energy converter being developed at the National Renewable Energy Laboratory. The design utilizes controllable geometry features to shed structural loads while maintaining a rated power over a greater number of sea states. The second-generation design will seek to provide a more refined control of performance because the first-generation design demonstrated performance reductions considered too large for smooth power output. Performance is evaluated using frequency domain analysis with consideration of a nonideal power-take-off system, with respect to power absorption, foundation loads, and power-take-off torque.

Technology-based design and scaling for RTGs for space exploration in the 100 W range

NASA Astrophysics Data System (ADS)

Summerer, Leopold; Pierre Roux, Jean; Pustovalov, Alexey; Gusev, Viacheslav; Rybkin, Nikolai

2011-04-01

This paper presents the results of a study on design considerations for a 100 W radioisotope thermo-electric generator (RTG). Special emphasis has been put on designing a modular, multi-purpose system with high overall TRL levels and making full use of the extensive Russian heritage in the design of radioisotope power systems. The modular approach allowed insight into the scaling of such RTGs covering the electric power range from 50 to 200 W e (EoL). The retained concept is based on a modular thermal block structure, a radiative inner-RTG heat transfer and using a two-stage thermo-electric conversion system.

Design of the software development and verification system (SWDVS) for shuttle NASA study task 35

NASA Technical Reports Server (NTRS)

Drane, L. W.; Mccoy, B. J.; Silver, L. W.

1973-01-01

An overview of the Software Development and Verification System (SWDVS) for the space shuttle is presented. The design considerations, goals, assumptions, and major features of the design are examined. A scenario that shows three persons involved in flight software development using the SWDVS in response to a program change request is developed. The SWDVS is described from the standpoint of different groups of people with different responsibilities in the shuttle program to show the functional requirements that influenced the SWDVS design. The software elements of the SWDVS that satisfy the requirements of the different groups are identified.

Simulation-based optimization of lattice support structures for offshore wind energy converters with the simultaneous perturbation algorithm

NASA Astrophysics Data System (ADS)

Molde, H.; Zwick, D.; Muskulus, M.

2014-12-01

Support structures for offshore wind turbines are contributing a large part to the total project cost, and a cost saving of a few percent would have considerable impact. At present support structures are designed with simplified methods, e.g., spreadsheet analysis, before more detailed load calculations are performed. Due to the large number of loadcases only a few semimanual design iterations are typically executed. Computer-assisted optimization algorithms could help to further explore design limits and avoid unnecessary conservatism. In this study the simultaneous perturbation stochastic approximation method developed by Spall in the 1990s was assessed with respect to its suitability for support structure optimization. The method depends on a few parameters and an objective function that need to be chosen carefully. In each iteration the structure is evaluated by time-domain analyses, and joint fatigue lifetimes and ultimate strength utilization are computed from stress concentration factors. A pseudo-gradient is determined from only two analysis runs and the design is adjusted in the direction that improves it the most. The algorithm is able to generate considerably improved designs, compared to other methods, in a few hundred iterations, which is demonstrated for the NOWITECH 10 MW reference turbine.

Multidisciplinary design optimization of vehicle instrument panel based on multi-objective genetic algorithm

NASA Astrophysics Data System (ADS)

Wang, Ping; Wu, Guangqiang

2013-03-01

Typical multidisciplinary design optimization(MDO) has gradually been proposed to balance performances of lightweight, noise, vibration and harshness(NVH) and safety for instrument panel(IP) structure in the automotive development. Nevertheless, plastic constitutive relation of Polypropylene(PP) under different strain rates, has not been taken into consideration in current reliability-based and collaborative IP MDO design. In this paper, based on tensile test under different strain rates, the constitutive relation of Polypropylene material is studied. Impact simulation tests for head and knee bolster are carried out to meet the regulation of FMVSS 201 and FMVSS 208, respectively. NVH analysis is performed to obtain mainly the natural frequencies and corresponding mode shapes, while the crashworthiness analysis is employed to examine the crash behavior of IP structure. With the consideration of lightweight, NVH, head and knee bolster impact performance, design of experiment(DOE), response surface model(RSM), and collaborative optimization(CO) are applied to realize the determined and reliability-based optimizations, respectively. Furthermore, based on multi-objective genetic algorithm(MOGA), the optimal Pareto sets are completed to solve the multi-objective optimization(MOO) problem. The proposed research ensures the smoothness of Pareto set, enhances the ability of engineers to make a comprehensive decision about multi-objectives and choose the optimal design, and improves the quality and efficiency of MDO.

Development of a Novel Wireless Electric Power Transfer System for Space Applications

NASA Technical Reports Server (NTRS)

VazquezRamos, Gabriel; Yuan, Jiann-Shiun

2011-01-01

This paper will introduce a new implementation for wireless electric power transfer systems: space applications. Due to the risks that constitute the use of electrical connector for some space missions/applications, a simple wireless power system design approach will be evaluated as an alternative for the use of electrical connectors. This approach takes into consideration the overall system performance by designing the magnetic resonance elements and by verifying the overall system electrical behavior. System characterization is accomplished by executing circuit and analytical simulations using Matlab(TradeMark) and LTSpiceIV(TradeMark) software packages. The design methodology was validated by two different experiments: frequency consideration (design of three magnetic elements) and a small scale proof-ofconcept prototype. Experiment results shows successful wireless power transfer for all the cases studied. The proof-of-concept prototype provided approx.4 W of wireless power to the load (light bulb) at a separation of 3 cm from the source. In addition. a resonant circuit was designed and installed to the battery terminals of a handheld radio without batteries, making it tum on at a separation of approx.5 cm or less from the source. It was also demonstrated by prototype experimentation that multiple loads can be powered wirelessly at the same time with a single electric power source.

Design of the advanced regional aircraft, the DART-75

NASA Technical Reports Server (NTRS)

Elliot, Steve; Gislason, Jason; Huffstetler, Mark; Mann, Jon; Withers, Ashley; Zimmerman, Mark

1992-01-01

The need for regional aircraft stems from the problem of hub airport congestion. Regional travel will allow a passenger to commute from one spoke city to another spoke city without entering the congested hub airport. In addition, those people traveling longer routes may begin the flight at home instead of traveling to the hub airport. At this time, there is no American aerospace company that produces a regional transport for under 100 passengers. The intention of the Developmental Advanced Regional Transport (DART-75) is to fill this void with a modern, efficient regional aircraft. This design achieves the efficiency through a number of advanced features including three lifting surfaces, partial composite construction, and an advanced engine design. Efficiency is not the only consideration. Structural integrity, fatigue life, ease of maintenance, passenger comfort and convenience, and environmental aspects must all be considered. These factors force the design team to face many tradeoffs that are studied to find the best solution. The final consideration that cannot be overlooked is that of cost. The DART-75 is a 75-passenger medium-range regional transport intended for spoke-to-spoke, spoke-to-hub, and some hub-to-hub operations. Included are the general descriptions of the structures, weight and balance, stability and control, performance, and engine design.

Carbon dioxide mineralization process design and evaluation: concepts, case studies, and considerations.

PubMed

Yuen, Yeo Tze; Sharratt, Paul N; Jie, Bu

2016-11-01

Numerous carbon dioxide mineralization (CM) processes have been proposed to overcome the slow rate of natural weathering of silicate minerals. Ten of these proposals are mentioned in this article. The proposals are described in terms of the four major areas relating to CM process design: pre-treatment, purification, carbonation, and reagent recycling operations. Any known specifics based on probable or representative operating and reaction conditions are listed, and basic analysis of the strengths and shortcomings associated with the individual process designs are given in this article. The processes typically employ physical or chemical pseudo-catalytic methods to enhance the rate of carbon dioxide mineralization; however, both methods have its own associated advantages and problems. To examine the feasibility of a CM process, three key aspects should be included in the evaluation criteria: energy use, operational considerations as well as product value and economics. Recommendations regarding the optimal level of emphasis and implementation of measures to control these aspects are given, and these will depend very much on the desired process objectives. Ultimately, a mix-and-match approach to process design might be required to provide viable and economic proposals for CM processes.

Studies of a Latent Class Signal Detection Model for Constructed Response Scoring II: Incomplete and Hierarchical Designs. Research Report. ETS RR-10-08

ERIC Educational Resources Information Center

DeCarlo, Lawrence T.

2010-01-01

A basic consideration in large-scale assessments that use constructed response (CR) items, such as essays, is how to allocate the essays to the raters that score them. Designs that are used in practice are incomplete, in that each essay is scored by only a subset of the raters, and also unbalanced, in that the number of essays scored by each rater…

Summary Article: IEA HPP Annex 36: Quality Installation / Quality Maintenance Sensitivity Studies

DOE PAGES

Hourahan, Glenn; Domanski, Piotr; Baxter, Van D.

2015-01-30

The outcome from this Annex activity clearly identifies that poorly designed, installed, and/or maintained heat pumps operate inefficiently and waste considerable energy compared to their as-designed potential. Additionally, it is clear that small faults for a given field-observed practice are significant, that some attribute deviations (in various equipment applications and geographical locations) have a larger impact than others, and that multiple faults or deviations have a cumulative impact on heat pump performance.

A Prospective Study of the Concordance of DSM-IV and DSM-5 Diagnostic Criteria for Autism Spectrum Disorder

ERIC Educational Resources Information Center

Mazurek, Micah O.; Lu, Frances; Symecko, Heather; Butter, Eric; Bing, Nicole M.; Hundley, Rachel J.; Poulsen, Marie; Kanne, Stephen M.; Macklin, Eric A.; Handen, Benjamin L.

2017-01-01

The transition from DSM-IV to DSM-5 criteria for autism spectrum disorder (ASD) sparked considerable concern about the potential implications of these changes. This study was designed to address limitations of prior studies by prospectively examining the concordance of DSM-IV and final DSM-5 criteria on a consecutive sample of 439 children…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behnke, M. R.; Bellei, T.A.; Bloethe, W.G.

This paper presents a summary of the most impor- tant considerations for wind power plant collection system un- derground and overhead cable designs. Various considerations, including conductor selection, soil thermal properties, installa- tion methods, splicing, concentric grounding, and NESC/NEC requirements are discussed.

Design of the North Carolina Prostate Cancer Comparative Effectiveness and Survivorship Study (NC ProCESS).

PubMed

Chen, Ronald C; Carpenter, William R; Kim, Mimi; Hendrix, Laura H; Agans, Robert P; Meyer, Anne-Marie; Hoffmeyer, Anna; Reeve, Bryce B; Nielsen, Matthew E; Usinger, Deborah S; Strigo, Tara S; Jackman, Anne M; Anderson, Mary; Godley, Paul A

2015-01-01

The North Carolina Prostate Cancer Comparative Effectiveness & Survivorship Study (NC ProCESS) was designed in collaboration with stakeholders to compare the effectiveness of different treatment options for localized prostate cancer. Using the Rapid Case Ascertainment system of the North Carolina Central Cancer Registry, 1,419 patients (57% of eligible) with newly-diagnosed localized prostate cancer were enrolled from January 2011 to June 2013, on average 5 weeks after diagnosis. All participants were enrolled prior to treatment and this population-based cohort is sociodemographically diverse. Prospective follow-up continues to collect data on treatments received, disease control, survival and patient-reported outcomes. This study highlights several important considerations regarding stakeholder involvement, study design and generalizability regarding comparative effectiveness research in prostate cancer.

Research design considerations for chronic pain prevention clinical trials: IMMPACT recommendations

PubMed Central

Gewandter, Jennifer S.; Dworkin, Robert H.; Turk, Dennis C.; Farrar, John T.; Fillingim, Roger B.; Gilron, Ian; Markman, John D.; Oaklander, Anne Louise; Polydefkis, Michael J.; Raja, Srinivasa N.; Robinson, James P.; Woolf, Clifford J.; Ziegler, Dan; Ashburn, Michael A.; Burke, Laurie B.; Cowan, Penney; George, Steven Z.; Goli, Veeraindar; Graff, Ole X.; Iyengar, Smriti; Jay, Gary W.; Katz, Joel; Kehlet, Henrik; Kitt, Rachel A.; Kopecky, Ernest A.; Malamut, Richard; McDermott, Michael P.; Palmer, Pamela; Rappaport, Bob A.; Rauschkolb, Christine; Steigerwald, Ilona; Tobias, Jeffrey; Walco, Gary A.

2018-01-01

Although certain risk factors can identify individuals who are most likely to develop chronic pain, few interventions to prevent chronic pain have been identified. To facilitate the identification of preventive interventions, an IMMPACT meeting was convened to discuss research design considerations for clinical trials investigating the prevention of chronic pain. We present general design considerations for prevention trials in populations that are at relatively high risk for developing chronic pain. Specific design considerations included subject identification, timing and duration of treatment, outcomes, timing of assessment, and adjusting for risk factors in the analyses. We provide a detailed examination of 4 models of chronic pain prevention (i.e., chronic post-surgical pain, postherpetic neuralgia, chronic low back pain, and painful chemotherapy-induced peripheral neuropathy). The issues discussed can, in many instances, be extrapolated to other chronic pain conditions. These examples were selected because they are representative models of primary and secondary prevention, reflect persistent pain resulting from multiple insults (i.e., surgery, viral infection, injury, and toxic/noxious element exposure), and are chronically painful conditions that are treated with a range of interventions. Improvements in the design of chronic pain prevention trials could improve assay sensitivity and thus accelerate the identification of efficacious interventions. Such interventions would have the potential to reduce the prevalence of chronic pain in the population. Additionally, standardization of outcomes in prevention clinical trials will facilitate meta-analyses and systematic reviews and improve detection of preventive strategies emerging from clinical trials. PMID:25887465

Research design considerations for chronic pain prevention clinical trials: IMMPACT recommendations.

PubMed

Gewandter, Jennifer S; Dworkin, Robert H; Turk, Dennis C; Farrar, John T; Fillingim, Roger B; Gilron, Ian; Markman, John D; Oaklander, Anne Louise; Polydefkis, Michael J; Raja, Srinivasa N; Robinson, James P; Woolf, Clifford J; Ziegler, Dan; Ashburn, Michael A; Burke, Laurie B; Cowan, Penney; George, Steven Z; Goli, Veeraindar; Graff, Ole X; Iyengar, Smriti; Jay, Gary W; Katz, Joel; Kehlet, Henrik; Kitt, Rachel A; Kopecky, Ernest A; Malamut, Richard; McDermott, Michael P; Palmer, Pamela; Rappaport, Bob A; Rauschkolb, Christine; Steigerwald, Ilona; Tobias, Jeffrey; Walco, Gary A

2015-07-01

Although certain risk factors can identify individuals who are most likely to develop chronic pain, few interventions to prevent chronic pain have been identified. To facilitate the identification of preventive interventions, an IMMPACT meeting was convened to discuss research design considerations for clinical trials investigating the prevention of chronic pain. We present general design considerations for prevention trials in populations that are at relatively high risk for developing chronic pain. Specific design considerations included subject identification, timing and duration of treatment, outcomes, timing of assessment, and adjusting for risk factors in the analyses. We provide a detailed examination of 4 models of chronic pain prevention (ie, chronic postsurgical pain, postherpetic neuralgia, chronic low back pain, and painful chemotherapy-induced peripheral neuropathy). The issues discussed can, in many instances, be extrapolated to other chronic pain conditions. These examples were selected because they are representative models of primary and secondary prevention, reflect persistent pain resulting from multiple insults (ie, surgery, viral infection, injury, and toxic or noxious element exposure), and are chronically painful conditions that are treated with a range of interventions. Improvements in the design of chronic pain prevention trials could improve assay sensitivity and thus accelerate the identification of efficacious interventions. Such interventions would have the potential to reduce the prevalence of chronic pain in the population. Additionally, standardization of outcomes in prevention clinical trials will facilitate meta-analyses and systematic reviews and improve detection of preventive strategies emerging from clinical trials.

Study to define an approach for developing a computer-based system capable of automatic, unattended assembly/disassembly of spacecraft, phase 1

NASA Technical Reports Server (NTRS)

Nevins, J. L.; Defazio, T. L.; Seltzer, D. S.; Whitney, D. E.

1981-01-01

The initial set of requirements for additional studies necessary to implement a space-borne, computer-based work system capable of achieving assembly, disassembly, repair, or maintenance in space were developed. The specific functions required of a work system to perform repair and maintenance were discussed. Tasks and relevant technologies were identified and delineated. The interaction of spacecraft design and technology options, including a consideration of the strategic issues of repair versus retrieval-replacement or destruction by removal were considered along with the design tradeoffs for accomplishing each of the options. A concept system design and its accompanying experiment or test plan were discussed.

Design factors and considerations for a time-based flight management system

NASA Technical Reports Server (NTRS)

Vicroy, D. D.; Williams, D. H.; Sorensen, J. A.

1986-01-01

Recent NASA Langley Research Center research to develop a technology data base from which an advanced Flight Management System (FMS) design might evolve is reviewed. In particular, the generation of fixed range cruise/descent reference trajectories which meet predefined end conditions of altitude, speed, and time is addressed. Results on the design and theoretical basis of the trajectory generation algorithm are presented, followed by a brief discussion of a series of studies that are being conducted to determine the accuracy requirements of the aircraft and weather models resident in the trajectory generation algorithm. Finally, studies to investigate the interface requirements between the pilot and an advanced FMS are considered.

Hybrid propulsion technology program. Volume 1: Conceptional design package

NASA Technical Reports Server (NTRS)

Jensen, Gordon E.; Holzman, Allen L.; Leisch, Steven O.; Keilbach, Joseph; Parsley, Randy; Humphrey, John

1989-01-01

A concept design study was performed to configure two sizes of hybrid boosters; one which duplicates the advanced shuttle rocket motor vacuum thrust time curve and a smaller, quarter thrust level booster. Two sizes of hybrid boosters were configured for either pump-fed or pressure-fed oxygen feed systems. Performance analyses show improved payload capability relative to a solid propellant booster. Size optimization and fuel safety considerations resulted in a 4.57 m (180 inch) diameter large booster with an inert hydrocarbon fuel. The preferred diameter for the quarter thrust level booster is 2.53 m (96 inches). As part of the design study critical technology issues were identified and a technology acquisition and demonstration plan was formulated.

Genetic mechanism for designing new generation of buildings from data obtained by sensor agent robots

NASA Astrophysics Data System (ADS)

Ono, Chihiro; Mita, Akira

2012-04-01

Due to an increase in an elderly-people household, and global warming, the design of building spaces requires delicate consideration of the needs of elderly-people. Studies of intelligent spaces that can control suitable devices for residents may provide some of functions needed. However, these intelligent spaces are based on predefined scenarios so that it is difficult to handle unexpected circumstances and adapt to the needs of people. This study aims to suggest a Genetic adaption algorithm for building spaces. The feasibility of the algorithm is tested by simulation. The algorithm extend the existing design methodology by reflecting ongoing living information quickly in the variety of patterns.

Clinical studies in restorative dentistry: New directions and new demands.

PubMed

Opdam, N J M; Collares, K; Hickel, R; Bayne, S C; Loomans, B A; Cenci, M S; Lynch, C D; Correa, M B; Demarco, F; Schwendicke, F; Wilson, N H F

2018-01-01

Clinical research of restorative materials is confounded by problems of study designs, length of trials, type of information collected, and costs for trials, despite increasing numbers and considerable development of trials during the past 50 years. This opinion paper aims to discuss advantages and disadvantages of different study designs and outcomes for evaluating survival of dental restorations and to make recommendations for future study designs. Advantages and disadvantages of randomized trials, prospective and retrospective longitudinal studies, practice-based, pragmatic and cohort studies are addressed and discussed. The recommendations of the paper are that clinical trials should have rational control groups, include confounders such as patient risk factors in the data and analysis and should use outcome parameters relevant for profession and patients. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Design requirements for rigid printed wiring boards and assemblies. NASA Handbook

NASA Technical Reports Server (NTRS)

1986-01-01

The NASA requirements for assuring reliable rigid printed wiring board design are prescribed. Basic considerations necessary to assure reliable rigid printed wiring board design are described and incorporated.

Design trade-offs for homing missiles

NASA Astrophysics Data System (ADS)

Spencer, Allen; Moore, William

1992-05-01

Major design considerations, trade-offs and technology issues for future hypervelocity, anti-missile interceptors are presented in an overview format. Two classes of interceptors are considered: a low altitude interceptor using an active radar seeker for defense against tactical ballistic missiles (TBMs) and a higher altitude interceptor using a passive infra-red seeker for defense against ICBMs. Considerations are presented in the areas of mission requirements, seeker selection, aerodynamic and aerothermal environments, control systems, and guidance performance.

Design Considerations for Siting Grade Control Structures

DTIC Science & Technology

2001-12-01

require consideration before siting grade control structures. In the widest sense, the term grade control can be applied to any alteration in the...control structures. There are two basic types of grade control structures. One type can be referred to as a bed control structure as it is designed to...provide a hard point in the streambed that is capable of resisting the erosive forces of the degradational zone. The second type can be referred to

Memories and NASA Spacecraft: A Description of Memories, Radiation Failure Modes, and System Design Considerations

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Ladbury, Ray; Oldhamm, Timothy

2010-01-01

As NASA has evolved it's usage of spaceflight computing, memory applications have followed as well. In this slide presentation, the history of NASA's memories from magnetic core and tape recorders to current semiconductor approaches is discussed. There is a brief description of current functional memory usage in NASA space systems followed by a description of potential radiation-induced failure modes along with considerations for reliable system design.

Design considerations for Mars photovoltaic power systems

NASA Technical Reports Server (NTRS)

Landis, Geoffrey A.; Appelbaum, Joseph

1990-01-01

Considerations for operation of a photovoltaic power system on Mars are discussed with reference to Viking Lander data. The average solar insolation at Mars is 590 W/sq m, which is reduced yet further by atmospheric dust. Of major concern are dust storms, which have been observed to occur on local as well as on global scales, and their effect on solar array output. While atmospheric opacity may rise to values ranging from 3 to 9, depending on storm severity, there is still an appreciable large diffuse illumination, even at high opacities, so that photovoltaic operation is still possible. If the power system is to continue to generate power even on high-optical-opacity (i.e., dusty atmosphere) days, it is important that the photovoltaic system be designed to collect diffuse irradiance as well as direct. Energy storage will be required for operation during the night. Temperature and wind provide additional considerations for array design.

Instructional design considerations promoting engineering design self-efficacy

NASA Astrophysics Data System (ADS)

Jackson, Andrew M.

Engineering design activities are frequently included in technology and engineering classrooms. These activities provide an open-ended context for practicing critical thinking, problem solving, creativity, and innovation---collectively part of the 21st Century Skills which are increasingly needed for success in the workplace. Self-efficacy is a perceptual belief that impacts learning and behavior. It has been shown to directly impact each of these 21st Century Skills but its relation to engineering design is only recently being studied. The purpose of this study was to examine how instructional considerations made when implementing engineering design activities might affect student self-efficacy outcomes in a middle school engineering classroom. Student responses to two self-efficacy inventories related to design, the Engineering Design Self-Efficacy Instrument and Creative Thinking Self-Efficacy Inventory, were collected before and after participation in an engineering design curriculum. Students were also answered questions on specific factors of their experience during the curriculum which teachers may exhibit control over: teamwork and feedback. Results were analyzed using Pearson's correlation coefficients, paired and independent t-tests, and structural equation modeling to better understand patterns for self-efficacy beliefs in students. Results suggested that design self-efficacy and creative thinking self-efficacy are significantly correlated, r(1541) = .783, p < .001, and increased following participation in a design curriculum, M diff = 1.32, t(133) = 7.60, p < .001 and Mdiff = 0.79, t(124) = 4.19, p < .001 respectively. Structural models also showed that students perceive team inclusion and feedback as significant contributors to their self-efficacy beliefs, while team diversity was not related to self-efficacy. Separate models for each predictor demonstrated good fit. Recommendations are made based on the corresponding nature of engineering design self-efficacy and creative thinking self-efficacy: strategies encouraging self-efficacy in these domains may be transferrable. Instructors are made aware of the significant impact of classroom strategies for increasing self-efficacy and given specific recommendations related to teamwork and feedback to support students. Finally, although there were weaknesses in the study related to the survey administration, future research opportunities are presented which may build from this work.

Comparative relationship of fiber strength and yarn tenacity in four cotton cultivars

USDA-ARS?s Scientific Manuscript database

High volume instrumentation (HVITM) measurement is a primary and routine tool of providing fiber properties to cotton researchers. There have been considerable studies designed to derive yarn quality from acquired fiber quality data by various means, including HVI. There is also of desired informati...

Energy efficient engine flight propulsion system: Aircraft/engine integration evaluation

NASA Technical Reports Server (NTRS)

Patt, R. F.

1980-01-01

Results of aircraft/engine integration studies conducted on an advanced flight propulsion system are reported. Economic evaluations of the preliminary design are included and indicate that program goals will be met. Installed sfc, DOC, noise, and emissions were evaluated. Aircraft installation considerations and growth were reviewed.

Small Schools Task Force. Final Report.

ERIC Educational Resources Information Center

Eugene School District 4J, OR.

In the spring of 1975 the Eugene (Oregon) school board appointed a task force to make a comprehensive study related to all aspects of possible closure of small schools. Consideration was given to population and enrollment trends; economics; building condition; school size; school design; neighborhood and community implications; program capacity;…

[Speculations on Nutrition Education for the Next Generation].

ERIC Educational Resources Information Center

McAfee, Donald C.

Analyzing the changing needs of young people today can be helpful in designing future nutrition education programs. Studies indicate that 40 percent of today's 18-26 year olds have considerably different values/attitudes from past values/attitudes. Technology may determine what is possible, but values and attitudes determine what people will…

Elections: Secondary Teaching Activities in the Participation Series.

ERIC Educational Resources Information Center

Schultz, John; Taft-Morales, Hugh

One of a series of teacher-developed curriculum guides designed to encourage student participation and involvement in important social issues, this secondary level guide helps 7th through 12th grade English and social studies educators teach about the election process. An introductory section suggests practical considerations, means of enlisting…

Design Considerations for Today's Online Learners: A Study of Personalized, Relationship-Based Social Awareness Information

ERIC Educational Resources Information Center

Heo, Misook

2009-01-01

This article examined online learners' preferences in personalized, relationship-based social awareness information sharing in course management systems. Three hundred seventy-seven online learners' willingness to share social awareness information was measured through a national survey. Results indicated that today's online learners are open…

Improving the Design of Workplace E-Learning Research

ERIC Educational Resources Information Center

Dubois, Cathy; Long, Lori

2012-01-01

E-learning researchers face considerable challenges in creating meaningful and generalizable studies due to the complex nature of this dynamic training medium. Our experience in conducting workplace e-learning research led us to create this guide for planning research on e-learning. We share the unanticipated complications we encountered in our…

Energy efficient engine flight propulsion system: Aircraft/engine integration evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patt, R.F.

Results of aircraft/engine integration studies conducted on an advanced flight propulsion system are reported. Economic evaluations of the preliminary design are included and indicate that program goals will be met. Installed sfc, DOC, noise, and emissions were evaluated. Aircraft installation considerations and growth were reviewed.

Consideration of Exposures to Traffic-Related Air Pollution with Smart Growth Development

EPA Science Inventory

We address the near-road pollution problem as it relates to smart growth design strategies. Studies have shown that pollution levels tend to be high near heavily traveled roads and that road proximity is related to adverse health effects. These findings can conflict with urban ...

Electrical Safety: Safety and Health for Electrical Trades. Student Manual.

ERIC Educational Resources Information Center

Fowler, Thaddeus W.; Miles, Karen K.

This document is designed to teach learners in secondary and postsecondary electrical trades courses to recognize, evaluate, and control hazards associated with electrical work, The manual's eight sections each include some or all of the following components: instructional text; definitions; case studies illustrating key safety considerations;…

Maternal Depression and Developmental Disability: Research Critique

ERIC Educational Resources Information Center

Bailey, Donald B., Jr.; Golden, Robert N.; Roberts, Jane; Ford, Amy

2007-01-01

Maternal depression in families having a child with a disability has been the subject of considerable research over the past 25 years. This review was designed to describe the literature on maternal depression, critique its research methodology, identify consensus findings across studies, and make recommendations for future research. A particular…

Verification Fit Test of Three Size Infantry Helmet

DTIC Science & Technology

1975-01-01

consideration to the helmet designer. This result is consistent with other studies (for example, NDC Technical Report 72-52-CE, " Anthropometry of US Army...FRBQUENCY 18 * 17 * 16 * 15 * 14 * * 13 * * 12 * * * xl . * * 10 * * *S9 * * * * * ° •:i8 * * * * * S7 * * * * * * S6 * * * * * * * S5 4 * * * * * * * *I3

Production of hydrogen by direct gasification of coal with steam using nuclear heat

NASA Technical Reports Server (NTRS)

1975-01-01

Problems related to: (1) high helium outlet temperature of the reactor, and (2) gas generator design used in hydrogen production are studied. Special attention was given to the use of Oklahoma coal in the gasification process. Plant performance, operation, and environmental considerations are covered.

Exploring Quadrilaterals in a Small Group Computing Environment

ERIC Educational Resources Information Center

Lai, Kevin; White, Tobin

2012-01-01

Though cooperative learning has been a topic of considerable interest in educational research, there has been little study specific to learning in the mathematics content area of geometry. This paper seeks to address that gap through a design experiment featuring a novel small-group computing environment for supporting student learning about…

Guidelines for Reporting Quantitative Methods and Results in Primary Research

ERIC Educational Resources Information Center

Norris, John M.; Plonsky, Luke; Ross, Steven J.; Schoonen, Rob

2015-01-01

Adequate reporting of quantitative research about language learning involves careful consideration of the logic, rationale, and actions underlying both study designs and the ways in which data are analyzed. These guidelines, commissioned and vetted by the board of directors of "Language Learning," outline the basic expectations for…