Economic analysis of Darrieus vertical axis wind turbine systems for the generation of utility grid electrical power. Volume IV: summary and analysis of the A. T. Kearney and Alcoa Laboratories point design economic studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, W.N.; Nellums, R.O.

1979-08-01

The A. T. Kearney and Alcoa economic studies are two independent attempts to assess the installed costs of a series of six Darrieus vertical axis wind turbine designs. The designs cover a range of sizes with peak outputs from 10 to 1600 kW. All are designed to produce utility grid electrical power. Volume IV of this report summarizes, compares, and analyzes the results of these studies. The Kearney and Alcoa final reports are included in the Appendices.

Central station applications planning activities and supporting studies. [application of photovoltaic technology to power generation plants

NASA Technical Reports Server (NTRS)

Leonard, S. L.; Siegel, B.

1980-01-01

The application of photovoltaic technology in central station (utility) power generation plants is considered. A program of data collection and analysis designed to provide additional information about the subset of the utility market that was identified as the initial target for photovoltaic penetration, the oil-dependent utilities (especially muncipals) of the U.S. Sunbelt, is described along with a series of interviews designed to ascertain utility industry opinions about the National Photovoltaic Program as it relates to central station applications.

Radioisotope Electric Propulsion Missions Utilizing a Common Spacecraft Design

NASA Technical Reports Server (NTRS)

Fiehler, Douglas; Oleson, Steven

2004-01-01

A study was conducted that shows how a single Radioisotope Electric Propulsion (REP) spacecraft design could be used for various missions throughout the solar system. This spacecraft design is based on a REP feasibility design from a study performed by NASA Glenn Research Center and the Johns Hopkins University Applied Physics Laboratory. The study also identifies technologies that need development to enable these missions. The mission baseline for the REP feasibility design study is a Trojan asteroid orbiter. This mission sends an REP spacecraft to Jupiter s leading Lagrange point where it would orbit and examine several Trojan asteroids. The spacecraft design from the REP feasibility study would also be applicable to missions to the Centaurs, and through some change of payload configuration, could accommodate a comet sample-return mission. Missions to small bodies throughout the outer solar system are also within reach of this spacecraft design. This set of missions, utilizing the common REP spacecraft design, is examined and required design modifications for specific missions are outlined.

Utilization of Selected Vitality Staple Foods by Low Income Households in Ebonyi State

ERIC Educational Resources Information Center

Igba, Chimezie Elizabeth; Okoro, M. O.

2015-01-01

The study focused on the utilization of selected vitality foods among low income household in Ebonyi State. Specifically the study aimed at identifying vitality foods that are available, accessible and utilized by low income household in state. Descriptive survey design was used for the study. The population of the study is 2,173,501 households…

78 FR 68461 - Guidance for Industry: Studies To Evaluate the Utility of Anti-Salmonella Chemical Food Additives...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-14

...] Guidance for Industry: Studies To Evaluate the Utility of Anti- Salmonella Chemical Food Additives in Feeds... Industry: Studies to Evaluate the Utility of Anti-Salmonella Chemical Food Additives in Feeds,'' and is... of Anti-Salmonella Chemical Food Additives in Feeds (GFI 80) is to help sponsors design efficacy...

The Room Itself is Active: How Classroom Design Impacts Student Engagement

ERIC Educational Resources Information Center

Rands, Melissa L.; Gansemer-Topf, Ann M.

2017-01-01

A responsive case study evaluation approach utilizing interviews and focus groups collected student and faculty perspectives on examined how instructors and students utilized a newly redesigned active learning space at Iowa State University and the relationship of this design with environmental and behavioral factors of student engagement. The…

Evaluating the utility of two gestural discomfort evaluation methods

PubMed Central

Son, Minseok; Jung, Jaemoon; Park, Woojin

2017-01-01

Evaluating physical discomfort of designed gestures is important for creating safe and usable gesture-based interaction systems; yet, gestural discomfort evaluation has not been extensively studied in HCI, and few evaluation methods seem currently available whose utility has been experimentally confirmed. To address this, this study empirically demonstrated the utility of the subjective rating method after a small number of gesture repetitions (a maximum of four repetitions) in evaluating designed gestures in terms of physical discomfort resulting from prolonged, repetitive gesture use. The subjective rating method has been widely used in previous gesture studies but without empirical evidence on its utility. This study also proposed a gesture discomfort evaluation method based on an existing ergonomics posture evaluation tool (Rapid Upper Limb Assessment) and demonstrated its utility in evaluating designed gestures in terms of physical discomfort resulting from prolonged, repetitive gesture use. Rapid Upper Limb Assessment is an ergonomics postural analysis tool that quantifies the work-related musculoskeletal disorders risks for manual tasks, and has been hypothesized to be capable of correctly determining discomfort resulting from prolonged, repetitive gesture use. The two methods were evaluated through comparisons against a baseline method involving discomfort rating after actual prolonged, repetitive gesture use. Correlation analyses indicated that both methods were in good agreement with the baseline. The methods proposed in this study seem useful for predicting discomfort resulting from prolonged, repetitive gesture use, and are expected to help interaction designers create safe and usable gesture-based interaction systems. PMID:28423016

Comparison of anthropometry of U.S. electric utility field-workers with North American general populations.

PubMed

Marklin, Richard W; Saginus, Kyle A; Seeley, Patricia; Freier, Stephen H

2010-12-01

The primary purpose of this study was to determine whether conventional anthropometric databases of the U.S. general population are applicable to the population of U.S. electric utility field-workers. On the basis of anecdotal observations, field-workers for electric power utilities were thought to be generally taller and larger than the general population. However, there were no anthropometric data available on this population, and it was not known whether the conventional anthropometric databases could be used to design for this population. For this study, 3 standing and II sitting anthropometric measurements were taken from 187 male field-workers from three electric power utilities located in the upper Midwest of the United States and Southern California. The mean and percentile anthropometric data from field-workers were compared with seven well-known conventional anthropometric databases for North American males (United States, Canada, and Mexico). In general, the male field-workers were taller and heavier than the people in the reference databases for U.S. males. The field-workers were up to 2.3 cm taller and 10 kg to 18 kg heavier than the averages of the reference databases. This study was justified, as it showed that the conventional anthropometric databases of the general population underestimated the size of electric utility field-workers, particularly with respect to weight. When designing vehicles and tools for electric utility field-workers, designers and ergonomists should consider the population being designed for and the data from this study to maximize safety, minimize risk of injuries, and optimize performance.

Aircraft Maneuvers for the Evaluation of Flying Qualities and Agility. Volume 2. Maneuver Descriptions and Section Guide

DTIC Science & Technology

1993-08-01

Requirements to Design 2 Several of these maneuvers may be suitable for the development of design criteria or tactical utility studies . However, this...research was not intended to be a criteria development effort or a tactical ufiflity study . Instead, a sensitivity between each maneuver and various...utility studies because it contains measure of merit data and pilot comments for numerous desigp parameter variations. The Standard Evaluation

Marital Distress and Mental Health Care Service Utilization

ERIC Educational Resources Information Center

Schonbrun, Yael Chatav; Whisman, Mark A.

2010-01-01

Objective: This study was designed to evaluate the association between marital distress and mental health service utilization in a population-based sample of men and women (N = 1,601). Method: The association between marital distress and mental health care service utilization was evaluated for overall mental health service utilization and for…

Individual determinants of research utilization: a systematic review.

PubMed

Estabrooks, Carole A; Floyd, Judith A; Scott-Findlay, Shannon; O'Leary, Katherine A; Gushta, Matthew

2003-09-01

In order to design interventions that increase research use in nursing, it is necessary to have an understanding of what influences research use. To report findings on a systematic review of studies that examine individual characteristics of nurses and how they influence the utilization of research. A survey of published articles in English that examine the influence of individual factors on the research utilization behaviour of nurses, without restriction of the study design, from selected computerized databases and hand searches. Articles had to measure one or more individual determinants of research utilization, measure the dependent variable (research utilization), and evaluate the relationship between the dependent and independent variables. The studies also had to indicate the direction of the relationship between the independent and dependent variables, report a P-value and the statistic used, and indicate the magnitude of the relationship. Six categories of potential individual determinants were identified: beliefs and attitudes, involvement in research activities, information seeking, professional characteristics, education and other socio-economic factors. Research design, sampling, measurement, and statistical analysis were examined to evaluate methodological quality. Methodological problems surfaced in all of the studies and, apart from attitude to research, there was little to suggest that any potential individual determinant influences research use. Important conceptual and measurement issues with regard to research utilization could be better addressed if research in the area were undertaken longitudinally by multi-disciplinary teams of researchers.

Logging utilization in Idaho: Current and past trends

Treesearch

Eric A. Simmons; Todd A. Morgan; Erik C. Berg; Stanley J. Zarnoch; Steven W. Hayes; Mike T. Thompson

2014-01-01

A study of commercial timber-harvesting activities in Idaho was conducted during 2008 and 2011 to characterize current tree utilization, logging operations, and changes from previous Idaho logging utilization studies. A two-stage simple random sampling design was used to select sites and felled trees for measurement within active logging sites. Thirty-three logging...

A Proposal for the use of the Consortium Method in the Design-build system

NASA Astrophysics Data System (ADS)

Miyatake, Ichiro; Kudo, Masataka; Kawamata, Hiroyuki; Fueta, Toshiharu

In view of the necessity for efficient implementation of public works projects, it is expected to utilize advanced technical skills of private firms, for the purpose of reducing project costs, improving performance and functions of construction objects, and reducing work periods, etc. The design-build system is a method to order design and construction as a single contract, including design of structural forms and main specifications of the construction object. This is a system in which high techniques of private firms can be utilized, as a means to ensure qualities of design and construction, rational design, and efficiency of the project. The objective of this study is to examine the use of a method to form a consortium of civil engineering consultants and construction companies, as it is an issue related to the implementation of the design-build method. Furthermore, by studying various forms of consortiums to be introduced in future, it proposes procedural items required to utilize this method, during the bid and after signing a contract, such as the estimate submission from the civil engineering consultants etc.

Theoretical Study of Si(x) Ge(y)Li(z) (x=4-10, y=1-10, z=0-10) Clusters for Designing of Novel Nanostructured Materials to be Utilized as Anodes for Lithium-Ion Batteries

DTIC Science & Technology

2015-03-16

AFRL-OSR-VA-TR-2015-0088 Theoretical Study of Novel Nanostructured Materials for Lithium - Ion Batteries Mario Sanchez-Vazquez CENTRO DE INVESTIGACION...SiGeLi Clusters for Design of Novel Nanostructured Materials to Be Utilized as Anodes for Lithium - ion Batteries 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER...utilized as anodes for Lithium - ion batteries Final Report Nancy Perez-Peralta and Mario Sanchez-Vazquez Abstract In order to find out if

Conceptual design studies of 1985 commercial VTOL transports that utilized rotors, Volume 2

NASA Technical Reports Server (NTRS)

Magee, J. P.; Clark, R.; Alexander, H. R.

1974-01-01

Results of conceptual design studies of tilt rotor and tandem helicopter aircraft for a 200 nautical mile commercial short haul transport mission are presented. The trade study data used in selecting the design point aircraft and technology details necessary to support the design conclusions are included.

The Temporal Effect of Training Utility Perceptions on Adopting a Trained Method: The Role of Perceived Organizational Support

ERIC Educational Resources Information Center

Madera, Juan M.; Steele, Stacey T.; Beier, Margaret

2011-01-01

The current study examined the temporal effect of perceived training utility on adoption of a trained method and how perceived organizational support influences the relationship between perceived training utility perceptions and adoption of a trained method. With the use of a correlational-survey-based design, this longitudinal study required…

Assessment of the Availability, Utilization and Management of ICT Facilities in Teaching English Language in Secondary Schools in Kaduna State, Nigeria

ERIC Educational Resources Information Center

Yusuf, Hanna Onyi; Maina, Bashir; Dare, Michael Omotayo

2013-01-01

The study investigated the availability, utilization and management of ICT facilities in teaching English language in secondary schools in Kaduna State, Nigeria. The study adopted a descriptive survey research design. A questionnaire titled "Availability, Utilization and Management of Information and Communication Technology in teaching…

Sediment Export from Forest Road Turn-outs: A Study Design and Preliminary Results

Treesearch

Johnny M. Grace

1998-01-01

This paper reports the design and preliminary results of a study that evaluates the effects of commonly prescribed forest road runoff control treatments. A study design which utilizes runoff samplers, runoff diversion walls, sediment filter bags, and erosion stakes to evaluate sediment transport through runoff control treatments is documented. The study design will...

Systematic Field Study of NO(x) Emission Control Methods for Utility Boilers.

ERIC Educational Resources Information Center

Bartok, William; And Others

A utility boiler field test program was conducted. The objectives were to determine new or improved NO (x) emission factors by fossil fuel type and boiler design, and to assess the scope of applicability of combustion modification techniques for controlling NO (x) emissions from such installations. A statistically designed test program was…

Application of Regression-Discontinuity Analysis in Pharmaceutical Health Services Research

PubMed Central

Zuckerman, Ilene H; Lee, Euni; Wutoh, Anthony K; Xue, Zhenyi; Stuart, Bruce

2006-01-01

Objective To demonstrate how a relatively underused design, regression-discontinuity (RD), can provide robust estimates of intervention effects when stronger designs are impossible to implement. Data Sources/Study Setting Administrative claims from a Mid-Atlantic state Medicaid program were used to evaluate the effectiveness of an educational drug utilization review intervention. Study Design Quasi-experimental design. Data Collection/Extraction Methods A drug utilization review study was conducted to evaluate a letter intervention to physicians treating Medicaid children with potentially excessive use of short-acting β2-agonist inhalers (SAB). The outcome measure is change in seasonally-adjusted SAB use 5 months pre- and postintervention. To determine if the intervention reduced monthly SAB utilization, results from an RD analysis are compared to findings from a pretest–posttest design using repeated-measure ANOVA. Principal Findings Both analyses indicated that the intervention significantly reduced SAB use among the high users. Average monthly SAB use declined by 0.9 canisters per month (p<.001) according to the repeated-measure ANOVA and by 0.2 canisters per month (p<.001) from RD analysis. Conclusions Regression-discontinuity design is a useful quasi-experimental methodology that has significant advantages in internal validity compared to other pre–post designs when assessing interventions in which subjects' assignment is based on cutoff scores for a critical variable. PMID:16584464

Telework and the Manager Employee Relationship

DTIC Science & Technology

2017-04-06

Research Design This research project utilized the results of published studies, surveys , and theories to examine the impact of telework on the manager...13 Research Design ...paper were based on the results of studies and surveys that were not designed nor conducted by the author of this study. Nor were those studies

Space Biology Initiative. Trade Studies, volume 2

NASA Technical Reports Server (NTRS)

1989-01-01

The six studies which are the subjects of this report are entitled: Design Modularity and Commonality; Modification of Existing Hardware (COTS) vs. New Hardware Build Cost Analysis; Automation Cost vs. Crew Utilization; Hardware Miniaturization versus Cost; Space Station Freedom/Spacelab Modules Compatibility vs. Cost; and Prototype Utilization in the Development of Space Hardware. The product of these six studies was intended to provide a knowledge base and methodology that enables equipment produced for the Space Biology Initiative program to meet specific design and functional requirements in the most efficient and cost effective form consistent with overall mission integration parameters. Each study promulgates rules of thumb, formulas, and matrices that serves as a handbook for the use and guidance of designers and engineers in design, development, and procurement of Space Biology Initiative (SBI) hardware and software.

Space Biology Initiative. Trade Studies, volume 1

NASA Technical Reports Server (NTRS)

1989-01-01

The six studies which are addressed are entitled: Design Modularity and Commonality; Modification of Existing Hardware (COTS) vs. New Hardware Build Cost Analysis; Automation Cost vs. Crew Utilization; Hardware Miniaturization versus Cost; Space Station Freedom/Spacelab Modules Compatibility vs. Cost; and Prototype Utilization in the Development of Space Hardware. The product of these six studies was intended to provide a knowledge base and methodology that enables equipment produced for the Space Biology Initiative program to meet specific design and functional requirements in the most efficient and cost effective form consistent with overall mission integration parameters. Each study promulgates rules of thumb, formulas, and matrices that serves has a handbook for the use and guidance of designers and engineers in design, development, and procurement of Space Biology Initiative (SBI) hardware and software.

Electric utility pole yard training facility: Designing an effective learning environment

NASA Astrophysics Data System (ADS)

Topping, Robert P.

The primary responsibility of electric utilities is to supply consistent, dependable, and affordable energy to private customers, businesses, and industries. As with many businesses, electric utilities are experiencing the effects of an aging workforce and expending considerable resources to train their current and replacement workers. Community colleges can partner with electric utilities to provide effective learning environments for these workers, and gain access to new sources of revenue and community support for the colleges. The purpose of this study was to describe the functions, features, and major design issues of an effective learning environment for training electric utility industry workers, the electric utility line-worker pole yard. Case studies of three "state of the art" line-worker pole yard training environments provide the basis for the study's findings and implications. The study was guided by the following research questions: (1) What is the function of a line-worker pole yard in supporting effective training? (2) What are the features of present day ("state of the art") line-worker pole yard learning environments? and (3) What are the major issues that need to be addressed in designing a line-worker pole yard learning environment for the future? The study participants included industry representatives, training coordinators, instructors, and students from the three selected "state of the art" line-worker pole yard sites. The overall findings from the study resulted in composites of the desired features of learning outcomes, learning process, and learning environment for a line-worker pole yard training program and major issues that are affecting the future design of these training programs. Composite findings of a pole-yard training environment included unique features associated with: (a) outdoor, (b) indoor, (c) underground, (d) classroom, (e) gathering places, and (f) work-based learning components. Composite findings with regard to major issues that need to be considered in future designs of pole-yard training environments included: (a) available unrestricted land for expansion, (b) resource commitment level, (c) workforce demographics, (d) aging industrial infrastructure, (e) electronic information and communication capability, (f) quality and quantity of available instructors, and (g) environmental and economic impact.

State Performance-Based Regulation Using Multiyear Rate Plans for U.S. Electric Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Mark Newton; Makos, Matt; Deason, Jeff

Electric utilities today must contain costs at a time when many need to modernize aging systems and all face major changes in technologies, customer preferences and competitive pressures.Most U.S. electric utility facilities are investor-owned, subject to rate and service regulation by state public utility commissions. Regulatory systems under which these utilities operate affect their performance and ability to meet these challenges. In this business environment, multiyear rate plans have some advantages over traditional rate regulation.The report focuses on key design issues and provides case studies of the multiyear rate plan approach, applicable to both vertically integrated and restructured states. Markmore » Newton Lowry and Matt Makos of Pacific Energy Group Research and Jeff Deason of Berkeley Lab authored the report; Lisa Schwartz, Berkeley Lab, was project manager and technical editor.The report is aimed primarily at state utility regulators and stakeholders in the state regulatory process. The multiyear rate approach also provides ideas on how to streamline oversight of public power utilities and rural electric cooperatives for their governing boards.Two key provisions of multiyear rate plans strengthen cost containment incentives and streamline regulation: 1. Reducing frequency of rate cases, typically to every four or five years 2. Using an attrition relief mechanism to escalate rates or revenue between rate cases to address cost pressures such as inflation and growth in number of customers, independently of the utility’s own cost Better utility performance can be achieved under well-designed multiyear rate plans while achieving lower regulatory costs. Benefits can be shared between utilities and their customers. But plans can be complex and involve significant changes in the regulatory system. Designing plans that stimulate utility performance without undue risk and share benefits fairly can be challenging.This report discusses the rationale for multiyear rate plans and their usefulness under modern business conditions. It then explains critical plan design issues and challenges and presents results from numerical research that considers the extra incentive power achieved under different plan provisions. Next, the report presents several case studies of utilities that have operated under formal multiyear rate plans or, for various reasons, have stayed out of rate cases for more than a decade. These studies consider the effect of multiyear rate plans and rate case frequency on utility cost, reliability and other performance dimensions.« less

The design of a solar energy collection system to augment heating and cooling for a commercial office building

NASA Technical Reports Server (NTRS)

Basford, R. C.

1977-01-01

Analytical studies supported by experimental testing indicate that solar energy can be utilized to heat and cool commercial buildings. In a 50,000 square foot one-story office building at the Langley Research Center, 15,000 square feet of solar collectors are designed to provide the energy required to supply 79 percent of the building heating needs and 52 percent of its cooling needs. The experience gained from the space program is providing the technology base for this project. Included are some of the analytical studies made to make the building design changes necessary to utilize solar energy, the basic solar collector design, collector efficiencies, and the integrated system design.

Design vs. Content: A Study of Adolescent Girls' Website Design Preferences

ERIC Educational Resources Information Center

Agosto, Denise E.

2004-01-01

This study considered the utility of gender schema theory in examining girls' website design preferences. It built on a previous study which identified eight website evaluation criteria related to biological sex: collaboration, social connectivity, flexibility, motility, contextuality, personal identification, inclusion, and graphic/multimedia…

Associations of daily pediatric asthma emergency department visits with air pollution in Newark, NJ: utilizing time-series and case-crossover study designs.

PubMed

Gleason, Jessie A; Fagliano, Jerald A

2015-10-01

Asthma is one of the most common chronic diseases affecting children. This study assesses the associations of ozone and fine particulate matter (PM2.5) with pediatric emergency department visits in the urban environment of Newark, NJ. Two study designs were utilized and evaluated for usability. We obtained daily emergency department visits among children aged 3-17 years with a primary diagnosis of asthma during April to September for 2004-2007. Both a time-stratified case-crossover study design with bi-directional control sampling and a time-series study design were utilized. Lagged effects (1-d through 5-d lag, 3-d average, and 5-d average) of ozone and PM2.5 were explored and a dose-response analysis comparing the bottom 5th percentile of 3-d average lag ozone with each 5 percentile increase was performed. Associations of interquartile range increase in same-day ozone were similar between the time-series and case-crossover study designs (RR = 1.08, 95% CI 1.04-1.12) and (OR = 1.10, 95% CI 1.06-1.14), respectively. Similar associations were seen for 1-day lag and 3-day average lag ozone levels. PM2.5 was not associated with the outcome in either study design. Dose-response assessment indicated a statistically significant and increasing association around 50-55 ppb consistent for both study designs. Ozone was statistically positively associated with pediatric asthma ED visits in Newark, NJ. Our results were generally comparable across the time-series and case-crossover study designs, indicating both are useful to assess local air pollution impacts.

WATER DISTRIBUTION SYSTEM ANALYSIS: FIELD STUDIES, MODELING AND MANAGEMENT

EPA Science Inventory

The user‘s guide entitled “Water Distribution System Analysis: Field Studies, Modeling and Management” is a reference guide for water utilities and an extensive summarization of information designed to provide drinking water utility personnel (and related consultants and research...

DOSIMETRY AND REPRODUCTIVE/DEVELOPMENTAL STUDY DESIGN AND INTERPRETATION FOR RISK OR SAFETY ASSESSMENT

EPA Science Inventory

Increasingly reproductive and developmental toxicity studies are utilized in assessing the potential for adverse affects in pregnant women, nursing infants, and children. These studies largely have been utilized based upon the dose to the mother due to the complexity of describin...

Ultra-low-mass flexible planar solar arrays using 50-micron-thick solar cells

NASA Technical Reports Server (NTRS)

Costogue, E. N.; Rayl, G.

1978-01-01

A conceptual design study has been completed which has shown the feasibility of ultra-low-mass planar solar arrays with specific power of 200 watts/kilogram. The beginning of life (BOL) power output of the array designs would be 10 kW at 1 astronomical unit (AU) and a 55C deg operating temperature. Two designs were studied: a retractable rollout design and a non-retractable fold-out. The designs employed a flexible low-mass blanket and low-mass structures. The blanket utilized 2 x 2 cm high-efficiency (13.5% at 28C deg AM0), ultra-thin (50 micron), silicon solar cells protected by thin (75 micron) plastic encapsulants. The structural design utilized the 'V'-stiffened approach which allows a lower mass boom to be used. In conjunction with the conceptual design, modules using the thin cells and plastic encapsulant were designed and fabricated.

Evaluation of Psychological Hardiness and Coping Style as Risk/Resilience Factors for Health Risk Behaviour

DTIC Science & Technology

2011-04-01

205 RESEARCH DESIGN & METHODS Objective/Hypothesis: The objective of the study is to evaluate the utility of a short hardiness-resilience...problems. Study Design & Methods : This research will evaluate the utility of hardiness, as measured by the DRS-15R, as a screening tool for...may take a toll on defense workers. This research points the way to new approaches for early identification of military workers at risk for stress

Design of an autonomous lunar construction utility vehicle

NASA Technical Reports Server (NTRS)

1990-01-01

In order to prepare a site for a lunar base, an autonomously operated construction vehicle is necessary. Discussed here is a Lunar Construction Utility Vehicle (LCUV), which uses interchangeable construction implements. Design of an elastic loop track system has advanced to the testing stage. A standard coupling device has been designed to insure a proper connection between the different construction tools and the LCUV. Autonomous control of the track drive motors was simulated successfully through the use of a joystick and a computer interface. A study of hydrogen-oxygen fuel cells produced estimates of reactant and product requirements and identified multilayer insulation needs. Research on the 100-kW heat rejection system determined that it is necessary to transport the radiator panel on a utility trailer. Extensive logistical support for the 720 hour use cycle requires further study.

Stemflow estimation in a redwood forest using model-based stratified random sampling

Treesearch

Jack Lewis

2003-01-01

Model-based stratified sampling is illustrated by a case study of stemflow volume in a redwood forest. The approach is actually a model-assisted sampling design in which auxiliary information (tree diameter) is utilized in the design of stratum boundaries to optimize the efficiency of a regression or ratio estimator. The auxiliary information is utilized in both the...

Considerations of study design.

PubMed

Koretz, Ronald L

2007-12-01

Research projects attempt to answer specific questions. The particular study design that is selected will depend in large measure on the nature of the question and the time and resources available. There are 5 common categories of clinical questions; they relate to etiology, prognosis, utility of diagnostic tests, efficacy of proposed interventions, and cost of treatment in specific disease states. A number of study designs can be used. Case reports serve to memorialize unusual or novel aspects of diseases. Retrospective case series are useful for defining natural history. Case-control studies are used by epidemiologists to elucidate potential etiologies of diseases. Prospective cohort studies can be used to assess natural history or to assess potential disease etiologies. Controlled trials are designed to assess the efficacy of therapeutic interventions. Studies that define the sensitivity and specificity of diagnostic tests can be used to assess the utility of those tests. Economic analyses estimate the costs that particular diseases or therapies will require. Each of these study designs has limitations; with the exception of high-quality randomized trials, none of these study designs can establish a causative relationship between putative etiologic (or therapeutic) factors and disease (outcomes).

Entrepreneurial Decision Making Styles and Learning Strategies Preferences

ERIC Educational Resources Information Center

Hestand, Yana

2012-01-01

Scope and Method of Study: The scope of this study was the decision making styles and the learning strategies preferences among entrepreneurs. The study utilized a descriptive research design. Internet was utilized as a data collection tool, Participant in the study were 240 entrepreneurs from the Oklahoma state, Tulsa county members of the SBA.…

Development of Designer Diamond Technology for High Pressure High Temperature Experiments in Support of Stockpile Stewardship Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vohra, Yogesh, K.

The role of nitrogen in the fabrication of designer diamond was systematically investigated by adding controlled amount of nitrogen in hydrogen/methane/oxygen plasma. This has led to a successful recipe for reproducible fabrication of designer diamond anvils for high-pressure high-temperature research in support of stockpile stewardship program. In the three-year support period, several designer diamonds fabricated with this new growth chemistry were utilized in high-pressure experiments at UAB and Lawrence Livermore National Laboratory. The designer diamond anvils were utilized in high-pressure studies on heavy rare earth metals, high pressure melting studies on metals, and electrical resistance measurements on iron-based layered superconductorsmore » under high pressures. The growth chemistry developed under NNSA support can be adapted for commercial production of designer diamonds.« less

Design Study for A Low-Cost LH2 Turbopump

NASA Technical Reports Server (NTRS)

Japikse, David; Baines, Nicholas; Platt, Michael J.

2000-01-01

A preliminary design study, focusing on potential component selections and design for manufacturing and assembly (DFMAR1) analysis, is presented in this study. The investigation focused on a nominal cost liquid hydrogen turbopump suitable for a private launch class vehicle. Utilizing a "turbocharger-like" design philosophy, preliminary feasibility studies of the basic pump design class, the rotordynamic design class, and the turbine design class were conducted with associated DFMA evaluations. Reasonable cost levels and sensible levels of product assurance have been established.

Design and Construction Process of Two LEED Certified University Buildings: A Collective Case Study

ERIC Educational Resources Information Center

Rich, Kim

2011-01-01

This study was conducted at the early stages of integrating LEED into the design process in which a clearer understanding of what sustainable and ecological design was about became evident through the duration of designing and building of two academic buildings on a university campus. In this case study, due to utilizing a grounded theory…

Assessment of Social Media Utilization and Study Habit of Students of Tertiary Institutions in Katsina State

ERIC Educational Resources Information Center

Olutola, Adekunle Thomas; Olatoye, Olufunke Omotoke; Olatoye, Rafiu Ademola

2016-01-01

This study investigated assessment of social media utilization and study habits of students of tertiary institutions in Katsina State. The descriptive survey design was adopted for this study. Three hundred and eighty-one (381) students' of tertiary institutions in Katsina State were randomly selected for the study. Researchers'-designed…

Utility of the MMPI-2-RF (Restructured Form) Validity Scales in Detecting Malingering in a Criminal Forensic Setting: A Known-Groups Design

ERIC Educational Resources Information Center

Sellbom, Martin; Toomey, Joseph A.; Wygant, Dustin B.; Kucharski, L. Thomas; Duncan, Scott

2010-01-01

The current study examined the utility of the recently released Minnesota Multiphasic Personality Inventory-2 Restructured Form (MMPI-2-RF; Ben-Porath & Tellegen, 2008) validity scales to detect feigned psychopathology in a criminal forensic setting. We used a known-groups design with the Structured Interview of Reported Symptoms (SIRS;…

Impact of Instructional Design on Virtual Teamwork

ERIC Educational Resources Information Center

Rawlings, Melody

2012-01-01

The purpose of this participatory action research study was to answer the following research question: How does online instructional design impact students' virtual teamwork performance? Through the lens of social constructivism, a qualitative, in-depth multi-case study design was utilized to conduct document analyses, observations, and student…

Design Considerations for a Water Treatment System Utilizing Ultra-Violet Light Emitting Diodes

DTIC Science & Technology

2014-03-27

DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...the United States. ii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...DISTRIBUTION UNLIMITED. iii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING

OPDOT: A computer program for the optimum preliminary design of a transport airplane

NASA Technical Reports Server (NTRS)

Sliwa, S. M.; Arbuckle, P. D.

1980-01-01

A description of a computer program, OPDOT, for the optimal preliminary design of transport aircraft is given. OPDOT utilizes constrained parameter optimization to minimize a performance index (e.g., direct operating cost per block hour) while satisfying operating constraints. The approach in OPDOT uses geometric descriptors as independent design variables. The independent design variables are systematically iterated to find the optimum design. The technical development of the program is provided and a program listing with sample input and output are utilized to illustrate its use in preliminary design. It is not meant to be a user's guide, but rather a description of a useful design tool developed for studying the application of new technologies to transport airplanes.

A Parametric Geometry Computational Fluid Dynamics (CFD) Study Utilizing Design of Experiments (DOE)

NASA Technical Reports Server (NTRS)

Rhew, Ray D.; Parker, Peter A.

2007-01-01

Design of Experiments (DOE) techniques were applied to the Launch Abort System (LAS) of the NASA Crew Exploration Vehicle (CEV) parametric geometry Computational Fluid Dynamics (CFD) study to efficiently identify and rank the primary contributors to the integrated drag over the vehicles ascent trajectory. Typical approaches to these types of activities involve developing all possible combinations of geometries changing one variable at a time, analyzing them with CFD, and predicting the main effects on an aerodynamic parameter, which in this application is integrated drag. The original plan for the LAS study team was to generate and analyze more than1000 geometry configurations to study 7 geometric parameters. By utilizing DOE techniques the number of geometries was strategically reduced to 84. In addition, critical information on interaction effects among the geometric factors were identified that would not have been possible with the traditional technique. Therefore, the study was performed in less time and provided more information on the geometric main effects and interactions impacting drag generated by the LAS. This paper discusses the methods utilized to develop the experimental design, execution, and data analysis.

Electric Utility Rate Design Study: reference manual and procedures for implementing PURPA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

State regulatory commissions will be assisted by using this manual in carrying out their responsibilities under the National Energy Act, specifically under the Public Utilities Regulatory Policies Act (PURPA). The research and materials of the Rate Design Study are basically applicable to Title I of PURPA, and the Manual covers only that part of the Act. The Rate Design Study covers a wide scope of research and professional opinions and are a major reference source for data, information, and divergent views on practically every aspect of electric utility rate design. The introductory part calls attention to particularly important aspects ofmore » responsibilities, authority, and procedures. The second part outlines the specific responsibilities placed by Title I of PURPA on the State commissions. Part 3 discusses some of the procedural and substantive requirements and options of PURPA with particular emphasis on their relation to the Rate Design Study, State law, and State regulatory policies. Part 4 is an independent analysis that includes cross-indexed references to the more than 60 reports prepared by the Rate Design Study and also to other pertinent sources of information and data. Part 5 summarizes a survey conducted in January 1979 of State commission actions related to the matters contained in Title I of PURPA. Part 6 presents the text of the law. Part 7 is the request from NARUC that prompted the preparation of the Manual. (MCW)« less

Compliance Patterns and Utilization of e-Health for Glucose Monitoring: Standalone Internet Gateway and Tablet Device.

PubMed

Rho, Mi Jung; Kim, Hun-Sung; Yoon, Kun-Ho; Choi, In Young

2017-04-01

Knowledge regarding compliance patterns and service utilization in e-health is important for the development of effective services. To develop proper e-health, the characteristics of compliance patterns and utilization of e-health should be studied. We studied these for glucose monitoring of diabetic patients from primary clinics. Data were collected from 160 outpatients who participated in e-health for glucose monitoring funded by the Korean government. Specifically, this study focused on two device types: a standalone Internet gateway and a tablet device. The SPSS 18.0 software was used for statistical analyses of demographic characteristics, survival data, and Cox proportional hazards regression model. Standalone Internet gateway users demonstrated a more stable compliance pattern than did tablet device users. The compliance rate differed according to the device type. Typically, compliance decreases considerably around 8 months. In these results, standalone Internet gateway users utilized the service for longer periods than tablet device users. Gateway type and location also influenced utilization (p < 0.05). The service should be designed according to the device type to develop appropriate service models. Thus, service designers should understand the different characteristics of service devices. This study provides insight into compliance patterns and utilization to develop appropriate service models and service interventions depending on the device.

Experiences of Vulnerable Residential Customer Subpopulations with Critical Peak Pricing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappers, Peter; Spurlock, C. Anna; Todd, Annika

DOE decided to co-fund ten utilities to undertake eleven experimentally-designed Consumer Behavior Studies (CBS) that proposed to examine a wide range of the topics of interest to the electric utility industry. Each chosen utility was to design, implement and evaluate their own study in order to address questions of interest both to itself and to its applicable regulatory authority, whose approval was generally necessary for the study to proceed. The DOE Office of Energy Delivery and Electricity Reliability (OE), however, did set guidelines, both in the FOA and subsequently during the contracting period, for what would constitute an acceptable studymore » under the Grant. To assist in ensuring these guidelines were adhered to, OE requested that LBNL act as project manager for these Consumer Behavior Studies to achieve consistency of experimental design and adherence to data collection and reporting protocols across the ten utilities. As part of its role, LBNL formed technical advisory groups (TAG) to separately assist each of the utilities by providing technical assistance in all aspects of the design, implementation and evaluation of their studies. LBNL was also given a unique opportunity to perform a comprehensive, cross-study analysis that uses the customer-level interval meter and demographic data made available by these utilities due to SGIG-imposed reporting requirements, in order to analyze critical policy issues associated with AMI-enabled rates and control/information technology. LBNL will publish the results of these analyses in a series of research reports, of which this is one, that attempt to address critical policy issues relating to a variety of topics including customer acceptance, retention and load response to time-based rates and various forms of enabling control and information technologies. This report extends the existing empirical literature on the experiences of low-income customers exposed to critical peak pricing, and provides the first glimpses into the experiences of the elderly and those who reported being chronically ill. Specifically, we analyzed two of the time-based rate consumer behavior studies, which were co-funded by the Department of Energy as part of the Smart Grid Investment Grant program.« less

Combining Anderson's Model in the Teaching of Art Appreciation for Undergraduate Students

ERIC Educational Resources Information Center

Subramaniam, Maithreyi; Basaree, Ruzaika Omar; Hanafi, Jaffri; Putih, Abu Talib

2016-01-01

This study utilized 33 students taking creative communication design 3 in the third year of the graphic design and multimedia program, using an Anderson's model in teaching art appreciation. The quantitative research design and procedures were employed in this study. An experimental research using the quasi-experimental design, a single-group…

Instructional Design and Online Learning: A Quality Assurance Study

ERIC Educational Resources Information Center

Monroe, Rose M.

2011-01-01

The purpose of this study was to investigate the difference in the evaluations of online course quality using the Quality Matters model among four groups of reviewers: instructional designers, faculty with subject-matter expertise, peer faculty with no subject-matter expertise, and administrators. A causal-comparative design was utilized to…

Characterizing Design Learning through the Use of Language: A Mixed-Methods Study of Engineering Designers. Research Brief

ERIC Educational Resources Information Center

Atman, Cindy; Kilgore, Deborah; McKenna, Ann

2009-01-01

This analysis, that utilizes data from part of the Academic Pathways Study (APS) of the Center for the Advancement of Engineering Education (CAEE), found that as a result of taking a course in engineering design and/or studying engineering for four years, students acquire engineering design language that is common to a larger community of practice…

Lunar NTR vehicle design and operations study

NASA Technical Reports Server (NTRS)

Hodge, John

1993-01-01

The results of a lunar nuclear thermal rocket (NTR) vehicle design and operations study are presented in text and graphic form. The objectives of the study were to evaluate the potential applications of a specific NTR design to past and current (First Lunar Outpost) mission profiles for piloted and cargo lunar missions, and to assess the applicability of utilizing lunar vehicle design concepts for Mars missions.

Designing Interactive Learning Systems.

ERIC Educational Resources Information Center

Barker, Philip

1990-01-01

Describes multimedia, computer-based interactive learning systems that support various forms of individualized study. Highlights include design models; user interfaces; design guidelines; media utilization paradigms, including hypermedia and learner-controlled models; metaphors and myths; authoring tools; optical media; workstations; four case…

American Recovery and Reinvestment Act of 2009: Final Report on Customer Acceptance, Retention, and Response to Time-Based Rates from Consumer Behavior Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappers, Peter; Scheer, Rich

Time-based rate programs, enabled by utility investments in advanced metering infrastructure (AMI), are increasingly being considered by utilities as tools to reduce peak demand and enable customers to better manage consumption and costs. Under the Smart Grid Investment Grant Program (SGIG), the U.S. Department of Energy (DOE) partnered with several electric utilities to conduct consumer behavior studies (CBS). The goals involved applying randomized and controlled experimental designs for estimating customer responses more precisely and credibly to advance understanding of time-based rates and customer systems, and provide new information for improving program designs, implementation strategies, and evaluations. The intent was tomore » produce more robust and credible analysis of impacts, costs, benefits, and lessons learned and assist utility and regulatory decision makers in evaluating investment opportunities involving time-based rates.« less

A Mixed Methods Investigation of Mixed Methods Sampling Designs in Social and Health Science Research

ERIC Educational Resources Information Center

Collins, Kathleen M. T.; Onwuegbuzie, Anthony J.; Jiao, Qun G.

2007-01-01

A sequential design utilizing identical samples was used to classify mixed methods studies via a two-dimensional model, wherein sampling designs were grouped according to the time orientation of each study's components and the relationship of the qualitative and quantitative samples. A quantitative analysis of 121 studies representing nine fields…

Impact of Community Health Workers on Use of Healthcare Services in the United States: A Systematic Review.

PubMed

Jack, Helen E; Arabadjis, Sophia D; Sun, Lucy; Sullivan, Erin E; Phillips, Russell S

2017-03-01

As the US transitions to value-based healthcare, physicians and payers are incentivized to change healthcare delivery to improve quality of care while controlling costs. By assisting with the management of common chronic conditions, community health workers (CHWs) may improve healthcare quality, but physicians and payers who are making choices about care delivery also need to understand their effects on healthcare spending. We searched PubMed, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, PsycINFO, Embase, and Web of Science from the inception of each database to 22 June 2015. We included US-based studies that evaluated a CHW intervention for patients with at least one chronic health condition and reported cost or healthcare utilization outcomes. We evaluated studies using tools specific to study design. Our search yielded 2,941 studies after removing duplicates. Thirty-four met inclusion and methodological criteria. Sixteen studies (47%) were randomized controlled trials (RCTs). RCTs typically had less positive outcomes than other study designs. Of the 16 RCTs, 12 reported utilization outcomes, of which 5 showed a significant reduction in one or more of ED visits, hospitalizations and/or urgent care visits. Significant reductions reported in ED visits ranged from 23%-51% and in hospitalizations ranged from 21%-50%, and the one significant reduction in urgent care visits was recorded at 60% (p < 0.05 for all). Our results suggest that CHW interventions have variable effects, but some may reduce costs and preventable utilization. These findings suggest that it is possible to achieve reductions in care utilization and cost savings by integrating CHWs into chronic care management. However, variations in cost and utilization outcomes suggest that CHWs alone do not make an intervention successful. The paucity of rigorous studies and heterogeneity of study designs limited conclusions about factors associated with reduced utilization.

Utilization of the Quality Assurance Handbook in Secondary School Supervision of Instruction in Enugu State, Nigeria

ERIC Educational Resources Information Center

Chidobi, R. U.; Eze Thecla, A. Y.

2016-01-01

The purpose of this study is to investigate the extent of utilization of Quality Assurance Handbook in the supervision of instruction in secondary schools. Descriptive survey design was employed. The quantitative data were collected through an 18-item questionnaire titled, "Extent of Utilization of Quality Assurance Handbook in Secondary…

Integrated Utility Systems Feasibility Study and Conceptual Design at the University of Florida. Executive Summary.

ERIC Educational Resources Information Center

Kirmse, Dale W.; Manyimo, Steve B.

This executive summary presents a brief analysis of findings and recommendations. The concept of the Integrated Utility System (IUS) is to consider the interaction and mutual support of five utility subsystems needed by a campus complex of buildings. The subsystems are: (1) Electric power service; (2) Heating - ventilating - air conditioning and…

Life and Utilization Criteria Identification in Design (LUCID). Volume II

DTIC Science & Technology

1981-10-01

AFWAL-.TR.412101 VOLUME Iff LIFE AND UTILIZATION CRITERIA IDENTIFICATION oIN DESIGN , VOLUME I[ SMcDonnell Aircraft Company SMcDonnell Douglas... design , a complexinteractive air- craft/engine design effort is conducted. The primary objective of the Life and Utilization Criteria Identification in... Design (LUCID) Program was to develop and demonstrate techniques which will aid in identifying, during conceptual design , balanced and consistent

Principals' Personal Variables and Information and Communication Technology Utilization in Federal Capital Territory Senior Secondary Schools, Abuja, Nigeria

ERIC Educational Resources Information Center

Ogunshola, Roseline Folashade; Adeniyi, Abiodun

2017-01-01

The study investigated principals' personal variables and information and communication technology utilization in Federal Capital Territory (FCT) senior secondary schools, Abuja, Nigeria. The study adopted the correlational research design. The study used a sample of 94 senior secondary schools (including public and private) in FCT. Stratified…

Assessment of Utilization of ICT Resources in Teaching among Tertiary Institution Business Educators in South Nigeria

ERIC Educational Resources Information Center

Okolocha, Chimezie Comfort; Nwadiani, Comfort Onaigho

2015-01-01

This study assessed the utilization of ICT resources in teaching among business educators in tertiary institutions in south Nigeria. Two research questions and two null hypotheses guided the study. Descriptive survey research design was adopted for the study. The population and sample for the study comprised all 240 business educators in colleges…

Spectral diffraction efficiency characterization of broadband diffractive optical elements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choi, Junoh; Cruz-Cabrera, Alvaro Augusto; Tanbakuchi, Anthony

Diffractive optical elements, with their thin profile and unique dispersion properties, have been studied and utilized in a number of optical systems, often yielding smaller and lighter systems. Despite the interest in and study of diffractive elements, the application has been limited to narrow spectral bands. This is due to the etch depths, which are optimized for optical path differences of only a single wavelength, consequently leading to rapid decline in efficiency as the working wavelength shifts away from the design wavelength. Various broadband diffractive design methodologies have recently been developed that improve spectral diffraction efficiency and expand the workingmore » bandwidth of diffractive elements. We have developed diffraction efficiency models and utilized the models to design, fabricate, and test two such extended bandwidth diffractive designs.« less

Making medical decisions in dependence of genetic background: estimation of the utility of DNA testing in clinical, pharmaco-epidemiological or genetic studies.

PubMed

Nguyen, Thuy Trang; Schäfer, Helmut; Timmesfeld, Nina

2013-05-01

An index measuring the utility of testing a DNA marker before deciding between two alternative treatments is proposed which can be estimated from pharmaco-epidemiological case-control or cohort studies. In the case-control design, external estimates of the prevalence of the disease and of the frequency of the genetic risk variant are required for estimating the utility index. Formulas for point and interval estimates are derived. Empirical coverage probabilities of the confidence intervals were estimated under different scenarios of disease prevalence, prevalence of drug use, and population frequency of the genetic variant. To illustrate our method, we re-analyse pharmaco-epidemiological case-control data on oral contraceptive intake and venous thrombosis in carriers and non-carriers of the factor V Leiden mutation. We also re-analyse cross-sectional data from the Framingham study on a gene-diet interaction between an APOA2 polymorphism and high saturated fat intake on obesity. We conclude that the utility index may be helpful to evaluate and appraise the potential clinical and public health relevance of gene-environment interaction effects detected in genomic and candidate gene association studies and may be a valuable decision support for designing prospective studies on the clinical utility. © 2013 Wiley Periodicals, Inc.

Health Insurance Benefit Design and Healthcare Utilization in Northern Rural China

PubMed Central

Wang, Hong; Liu, Yu; Zhu, Yan; Xue, Lei; Dale, Martha; Sipsma, Heather; Bradley, Elizabeth

2012-01-01

Background Poverty due to illness has become a substantial social problem in rural China since the collapse of the rural Cooperative Medical System in the early 1980s. Although the Chinese government introduced the New Rural Cooperative Medical Schemes (NRCMS) in 2003, the associations between different health insurance benefit package designs and healthcare utilization remain largely unknown. Accordingly, we sought to examine the impact of health insurance benefit design on health care utilization. Methods and Findings We conducted a cross-sectional study using data from a household survey of 15,698 members of 4,209 randomly-selected households in 7 provinces, which were representative of the provinces along the north side of the Yellow River. Interviews were conducted face-to-face and in Mandarin. Our analytic sample included 9,762 respondents from 2,642 households. In each household, respondents indicated the type of health insurance benefit that the household had (coverage for inpatient care only or coverage for both inpatient and outpatient care) and the number of outpatient visits in the 30 days preceding the interview and the number of hospitalizations in the 365 days preceding the household interview. People who had both outpatient and inpatient coverage compared with inpatient coverage only had significantly more village-level outpatient visits, township-level outpatient visits, and total outpatient visits. Furthermore, the increased utilization of township and village-level outpatient care was experienced disproportionately by people who were poorer, whereas the increased inpatient utilization overall and at the county level was experienced disproportionately by people who were richer. Conclusion The evidence from this study indicates that the design of health insurance benefits is an important policy tool that can affect the health services utilization and socioeconomic equity in service use at different levels. Without careful design, health insurance may not benefit those who are most in need of financial protection from health services expenses. PMID:23185616

Health insurance benefit design and healthcare utilization in northern rural China.

PubMed

Wang, Hong; Liu, Yu; Zhu, Yan; Xue, Lei; Dale, Martha; Sipsma, Heather; Bradley, Elizabeth

2012-01-01

Poverty due to illness has become a substantial social problem in rural China since the collapse of the rural Cooperative Medical System in the early 1980s. Although the Chinese government introduced the New Rural Cooperative Medical Schemes (NRCMS) in 2003, the associations between different health insurance benefit package designs and healthcare utilization remain largely unknown. Accordingly, we sought to examine the impact of health insurance benefit design on health care utilization. We conducted a cross-sectional study using data from a household survey of 15,698 members of 4,209 randomly-selected households in 7 provinces, which were representative of the provinces along the north side of the Yellow River. Interviews were conducted face-to-face and in Mandarin. Our analytic sample included 9,762 respondents from 2,642 households. In each household, respondents indicated the type of health insurance benefit that the household had (coverage for inpatient care only or coverage for both inpatient and outpatient care) and the number of outpatient visits in the 30 days preceding the interview and the number of hospitalizations in the 365 days preceding the household interview. People who had both outpatient and inpatient coverage compared with inpatient coverage only had significantly more village-level outpatient visits, township-level outpatient visits, and total outpatient visits. Furthermore, the increased utilization of township and village-level outpatient care was experienced disproportionately by people who were poorer, whereas the increased inpatient utilization overall and at the county level was experienced disproportionately by people who were richer. The evidence from this study indicates that the design of health insurance benefits is an important policy tool that can affect the health services utilization and socioeconomic equity in service use at different levels. Without careful design, health insurance may not benefit those who are most in need of financial protection from health services expenses.

Image Representation and Interactivity: An Exploration of Utility Values, Information-Needs and Image Interactivity

ERIC Educational Resources Information Center

Lewis, Elise C.

2011-01-01

This study was designed to explore the relationships between users and interactive images. Three factors were identified and provided different perspectives on how users interact with images: image utility, information-need, and images with varying levels of interactivity. The study used a mixed methodology to gain a more comprehensive…

Utilization of Mammography Services among Elderly Rural and Urban African American Women

ERIC Educational Resources Information Center

Agho, Augustine O; Mosley, Barbara W; Rivers, Patrick A; Parker, Shandowyn

2007-01-01

Purpose: This study was a two-year educational intervention and research project aimed at increasing the awareness of breast cancer and the utilization of Clinical Breast Examination (CBE) services and Self-Breast Examination (SBE) among elderly rural and urban African American women who are Medicare beneficiaries. Design: The study was…

Utility of LiDAR for large area forest inventory applications

Treesearch

Nicholas S. Skowronski; Andrew J. Lister

2012-01-01

Multi-resource inventory data are used in conjunction with Light Detection and Ranging (LiDAR) data from the Pennsylvania Department of Natural Resource's PAMAP Program to assess the utility of extensive LiDAR acquisitions for large area forest assessments. Background, justification, and initial study designs are presented. The proposed study will involve three...

How good is "evidence" from clinical studies of drug effects and why might such evidence fail in the prediction of the clinical utility of drugs?

PubMed

Naci, Huseyin; Ioannidis, John P A

2015-01-01

Promising evidence from clinical studies of drug effects does not always translate to improvements in patient outcomes. In this review, we discuss why early evidence is often ill suited to the task of predicting the clinical utility of drugs. The current gap between initially described drug effects and their subsequent clinical utility results from deficits in the design, conduct, analysis, reporting, and synthesis of clinical studies-often creating conditions that generate favorable, but ultimately incorrect, conclusions regarding drug effects. There are potential solutions that could improve the relevance of clinical evidence in predicting the real-world effectiveness of drugs. What is needed is a new emphasis on clinical utility, with nonconflicted entities playing a greater role in the generation, synthesis, and interpretation of clinical evidence. Clinical studies should adopt strong design features, reflect clinical practice, and evaluate outcomes and comparisons that are meaningful to patients. Transformative changes to the research agenda may generate more meaningful and accurate evidence on drug effects to guide clinical decision making.

Optimal Control Design Advantages Utilizing Two-Degree-of-Freedom Controllers

DTIC Science & Technology

1993-12-01

AFrTIGAE/ENYIV3D-27 AD--A273 839 D"TIC OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS THESIS Michael J. Stephens...AFIT/GAE/ENY/93D-27 OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS THESIS Presented to the Faculty of the Graduate...measurement noises compared to the I- DOF model. xvii OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS I. Introduction L1

A Participatory Design Approach for a Mobile App-Based Personal Response System

ERIC Educational Resources Information Center

Song, Donggil; Oh, Eun Young

2016-01-01

This study reports on a participatory design approach including the design, development, implementation, and evaluation of a mobile app-based personal response system (PRS). The first cycle formulated initial design principles through context and needs analysis; the second utilized the collaboration with instructors and experts embodying specific…

A Study of Novice Systems Analysis Problem Solving Behaviors Using Protocol Analysis

DTIC Science & Technology

1992-09-01

conducted. Each subject was given the same task to perform. The task involved a case study (Appendix B) of a utility company’s customer order processing system...behavior (Ramesh, 1989). The task was to design a customer order processing system that utilized a centralized telephone answering service center...of the utility company’s customer order processing system that was developed based on information obtained by a large systems consulting firm during

User-centered design to improve clinical decision support in primary care.

PubMed

Brunner, Julian; Chuang, Emmeline; Goldzweig, Caroline; Cain, Cindy L; Sugar, Catherine; Yano, Elizabeth M

2017-08-01

A growing literature has demonstrated the ability of user-centered design to make clinical decision support systems more effective and easier to use. However, studies of user-centered design have rarely examined more than a handful of sites at a time, and have frequently neglected the implementation climate and organizational resources that influence clinical decision support. The inclusion of such factors was identified by a systematic review as "the most important improvement that can be made in health IT evaluations." (1) Identify the prevalence of four user-centered design practices at United States Veterans Affairs (VA) primary care clinics and assess the perceived utility of clinical decision support at those clinics; (2) Evaluate the association between those user-centered design practices and the perceived utility of clinical decision support. We analyzed clinic-level survey data collected in 2006-2007 from 170 VA primary care clinics. We examined four user-centered design practices: 1) pilot testing, 2) provider satisfaction assessment, 3) formal usability assessment, and 4) analysis of impact on performance improvement. We used a regression model to evaluate the association between user-centered design practices and the perceived utility of clinical decision support, while accounting for other important factors at those clinics, including implementation climate, available resources, and structural characteristics. We also examined associations separately at community-based clinics and at hospital-based clinics. User-centered design practices for clinical decision support varied across clinics: 74% conducted pilot testing, 62% conducted provider satisfaction assessment, 36% conducted a formal usability assessment, and 79% conducted an analysis of impact on performance improvement. Overall perceived utility of clinical decision support was high, with a mean rating of 4.17 (±.67) out of 5 on a composite measure. "Analysis of impact on performance improvement" was the only user-centered design practice significantly associated with perceived utility of clinical decision support, b=.47 (p<.001). This association was present in hospital-based clinics, b=.34 (p<.05), but was stronger at community-based clinics, b=.61 (p<.001). Our findings are highly supportive of the practice of analyzing the impact of clinical decision support on performance metrics. This was the most common user-centered design practice in our study, and was the practice associated with higher perceived utility of clinical decision support. This practice may be particularly helpful at community-based clinics, which are typically less connected to VA medical center resources. Published by Elsevier B.V.

Extent of Head Teachers' Utilization of Innovative Sources of Funding Primary Schools in Enugu State of Nigeria

ERIC Educational Resources Information Center

Amogechukwu, Eze Thecla; Unoma, Chidobi Roseline

2017-01-01

The purpose of this study was to examine the extent Head teachers utilize innovative sources of funding primary schools in Enugu State of Nigeria. Descriptive survey design was employed to examine the extent head teachers utilize innovative sources of funding primary schools in Enugu State. Data were collected through a 14-item questionnaire…

Digital Divide in the Utilization of Information and Communication Technology (ICT) in Counsellor Education in Nigerian Universities

ERIC Educational Resources Information Center

Eyo, Mfon

2014-01-01

This study investigated digital divide in the utilization of Information and Communication Technology (ICT) in counsellor education in Nigerian universities. It had two research questions and two hypotheses tested at 0.05 level of significance. It adopted a survey design and used ICT Utilization Questionnaire (IUQ) in gathering data from the…

Individual determinants of research utilization by nurses: a systematic review update.

PubMed

Squires, Janet E; Estabrooks, Carole A; Gustavsson, Petter; Wallin, Lars

2011-01-05

Interventions that have a better than random chance of increasing nurses' use of research are important to the delivery of quality patient care. However, few reports exist of successful research utilization in nursing interventions. Systematic identification and evaluation of individual characteristics associated with and predicting research utilization may inform the development of research utilization interventions. To update the evidence published in a previous systematic review on individual characteristics influencing research utilization by nurses. As part of a larger systematic review on research utilization instruments, 12 online bibliographic databases were searched. Hand searching of specialized journals and an ancestry search was also conducted. Randomized controlled trials, clinical trials, and observational study designs examining the association between individual characteristics and nurses' use of research were eligible for inclusion. Studies were limited to those published in the English, Danish, Swedish, and Norwegian languages. A vote counting approach to data synthesis was taken. A total of 42,770 titles were identified, of which 501 were retrieved. Of these 501 articles, 45 satisfied our inclusion criteria. Articles assessed research utilization in general (n = 39) or kinds of research utilization (n = 6) using self-report survey measures. Individual nurse characteristics were classified according to six categories: beliefs and attitudes, involvement in research activities, information seeking, education, professional characteristics, and socio-demographic/socio-economic characteristics. A seventh category, critical thinking, emerged in studies examining kinds of research utilization. Positive relationships, at statistically significant levels, for general research utilization were found in four categories: beliefs and attitudes, information seeking, education, and professional characteristics. The only characteristic assessed in a sufficient number of studies and with consistent findings for the kinds of research utilization was attitude towards research; this characteristic had a positive association with instrumental and overall research utilization. This review reinforced conclusions in the previous review with respect to positive relationships between general research utilization and: beliefs and attitudes, and current role. Furthermore, attending conferences/in-services, having a graduate degree in nursing, working in a specialty area, and job satisfaction were also identified as individual characteristics important to research utilization. While these findings hold promise as potential targets of future research utilization interventions, there were methodological problems inherent in many of the studies that necessitate their findings be replicated in further research using more robust study designs and multivariate assessment methods.

Individual determinants of research utilization by nurses: a systematic review update

PubMed Central

2011-01-01

Background Interventions that have a better than random chance of increasing nurses' use of research are important to the delivery of quality patient care. However, few reports exist of successful research utilization in nursing interventions. Systematic identification and evaluation of individual characteristics associated with and predicting research utilization may inform the development of research utilization interventions. Objective To update the evidence published in a previous systematic review on individual characteristics influencing research utilization by nurses. Methods As part of a larger systematic review on research utilization instruments, 12 online bibliographic databases were searched. Hand searching of specialized journals and an ancestry search was also conducted. Randomized controlled trials, clinical trials, and observational study designs examining the association between individual characteristics and nurses' use of research were eligible for inclusion. Studies were limited to those published in the English, Danish, Swedish, and Norwegian languages. A vote counting approach to data synthesis was taken. Results A total of 42,770 titles were identified, of which 501 were retrieved. Of these 501 articles, 45 satisfied our inclusion criteria. Articles assessed research utilization in general (n = 39) or kinds of research utilization (n = 6) using self-report survey measures. Individual nurse characteristics were classified according to six categories: beliefs and attitudes, involvement in research activities, information seeking, education, professional characteristics, and socio-demographic/socio-economic characteristics. A seventh category, critical thinking, emerged in studies examining kinds of research utilization. Positive relationships, at statistically significant levels, for general research utilization were found in four categories: beliefs and attitudes, information seeking, education, and professional characteristics. The only characteristic assessed in a sufficient number of studies and with consistent findings for the kinds of research utilization was attitude towards research; this characteristic had a positive association with instrumental and overall research utilization. Conclusions This review reinforced conclusions in the previous review with respect to positive relationships between general research utilization and: beliefs and attitudes, and current role. Furthermore, attending conferences/in-services, having a graduate degree in nursing, working in a specialty area, and job satisfaction were also identified as individual characteristics important to research utilization. While these findings hold promise as potential targets of future research utilization interventions, there were methodological problems inherent in many of the studies that necessitate their findings be replicated in further research using more robust study designs and multivariate assessment methods. PMID:21208425

Utilization of Electronic Information Resources by Undergraduate Students of University of Ibadan: A Case Study of Social Sciences and Education

ERIC Educational Resources Information Center

Owolabi, Sola; Idowu, Oluwafemi A.; Okocha, Foluke; Ogundare, Atinuke Omotayo

2016-01-01

The study evaluated utilization of electronic information resources by undergraduates in the Faculties of Education and the Social Sciences in University of Ibadan. The study adopted a descriptive survey design with a study population of 1872 undergraduates in the Faculties of Education and the Social Sciences in University of Ibadan, from which a…

The Role of Formal Experiment Design in Hypersonic Flight System Technology Development

NASA Technical Reports Server (NTRS)

McClinton, Charles R.; Ferlemann, Shelly M.; Rock, Ken E.; Ferlemann, Paul G.

2002-01-01

Hypersonic airbreathing engine (scramjet) powered vehicles are being considered to replace conventional rocket-powered launch systems. Effective utilization of scramjet engines requires careful integration with the air vehicle. This integration synergistically combines aerodynamic forces with propulsive cycle functions of the engine. Due to the highly integrated nature of the hypersonic vehicle design problem, the large flight envelope, and the large number of design variables, the use of a statistical design approach in design is effective. Modern Design-of-Experiments (MDOE) has been used throughout the Hyper-X program, for both systems analysis and experimental testing. Application of MDOE fall into four categories: (1) experimental testing; (2) studies of unit phenomena; (3) refining engine design; and (4) full vehicle system optimization. The MDOE process also provides analytical models, which are also used to document lessons learned, supplement low-level design tools, and accelerate future studies. This paper will discuss the design considerations for scramjet-powered vehicles, specifics of MDOE utilized for Hyper-X, and present highlights from the use of these MDOE methods within the Hyper-X Program.

Plant-Scale Concentration Column Designs for SHINE Target Solution Utilizing AG 1 Anion Exchange Resin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stepinski, Dominique C.; Vandegrift, G. F.

2015-09-30

Argonne is assisting SHINE Medical Technologies (SHINE) in their efforts to develop SHINE, an accelerator-driven process that will utilize a uranyl-sulfate solution for the production of fission product Mo-99. An integral part of the process is the development of a column for the separation and recovery of Mo-99, followed by a concentration column to reduce the product volume from 15-25 L to <1 L. Argonne has collected data from batch studies and breakthrough column experiments to utilize the VERSE (Versatile Reaction Separation) simulation program (Purdue University) to design plant-scale product recovery and concentration processes.

Revised Point of Departure Design Options for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Fittje, James E.; Borowski, Stanley K.; Schnitzler, Bruce

2015-01-01

In an effort to further refine potential point of departure nuclear thermal rocket engine designs, four proposed engine designs representing two thrust classes and utilizing two different fuel matrix types are designed and analyzed from both a neutronics and thermodynamic cycle perspective. Two of these nuclear rocket engine designs employ a tungsten and uranium dioxide cermet (ceramic-metal) fuel with a prismatic geometry based on the ANL-200 and the GE-710, while the other two designs utilize uranium-zirconium-carbide in a graphite composite fuel and a prismatic fuel element geometry developed during the Rover/NERVA Programs. Two engines are analyzed for each fuel type, a small criticality limited design and a 111 kN (25 klbf) thrust class engine design, which has been the focus of numerous manned mission studies, including NASA's Design Reference Architecture 5.0. slightly higher T/W ratios, but they required substantially more 235U.

Conceptual engineering design studies of 1985-era commercial VTOL and STOL transports that utilize rotors

NASA Technical Reports Server (NTRS)

Magee, J. P.; Clark, R. D.; Widdison, C. A.

1975-01-01

Conceptual design studies are summarized of tandem-rotor helicopter and tilt-rotor aircraft for a short haul transport mission in the 1985 time frame. Vertical takeoff designs of both configurations are discussed, and the impact of external noise criteria on the vehicle designs, performance, and costs are shown. A STOL design for the tilt-rotor configuration is reported, and the effect of removing the vertical takeoff design constraints on the design parameters, fuel economy, and operating cost is discussed.

Brief motivational intervention with homeless adolescents: evaluating effects on substance use and service utilization.

PubMed

Baer, John S; Garrett, Sharon B; Beadnell, Blair; Wells, Elizabeth A; Peterson, Peggy L

2007-12-01

A brief motivational intervention with 117 homeless adolescents was evaluated using a randomized design and 3-month follow-up. The intervention was designed to raise youths' concerns about their substance use, support harm reduction, and encourage greater service utilization at a collaborating agency. The study was designed to strengthen initial promising results of an earlier study (P. L. Peterson, J. S. Baer, E. A. Wells, J. A. Ginzler, & S. B. Garrett, 2006). Several modifications in the clinical protocol were included to enhance engagement with the intervention. Analyses revealed no significant benefits for intervention participants when homeless youths' substance use rates were compared with those of control participants. Service utilization during the intervention period increased for those receiving the intervention but returned to baseline levels at follow-up. Participants reported overall reductions in substance use over time. Differences between sampling methods for the current and previous study are discussed, as are the limitations of brief interventions with this population. Future research needs to elucidate mechanisms of change and service engagement for highly vulnerable youth.

Assessing strategies for increasing urban routine immunization coverage of childhood vaccines in low and middle-income countries: A systematic review of peer-reviewed literature.

PubMed

Nelson, Kristin N; Wallace, Aaron S; Sodha, Samir V; Daniels, Danni; Dietz, Vance

2016-11-04

Immunization programs in developing countries increasingly face challenges to ensure equitable delivery of services within cities where rapid urban growth can result in informal settlements, poor living conditions, and heterogeneous populations. A number of strategies have been utilized in developing countries to ensure high community demand and equitable availability of urban immunization services; however, a synthesis of the literature on these strategies has not previously been undertaken. We reviewed articles published in English in peer-reviewed journals between 1990 and 2013 that assessed interventions for improving routine immunization coverage in urban areas in low- and middle-income countries. We categorized the intervention in each study into one of three groups: (1) interventions aiming to increase utilization of immunization services; (2) interventions aiming to improve availability of immunization services by healthcare providers, or (3) combined availability and utilization interventions. We summarized the main quantitative outcomes from each study and effective practices from each intervention category. Fifteen studies were identified; 87% from the African, Eastern Mediterranean and Southeast Asian regions of the World Health Organization (WHO). Six studies were randomized controlled trials, eight were pre- and post-intervention evaluations, and one was a cross-sectional study. Four described interventions designed to improve availability of routine immunization services, six studies described interventions that aimed to increase utilization, and five studies aiming to improve both availability and utilization of services. All studies reported positive change in their primary outcome indicator, although seven different primary outcomes indicators were used across studies. Studies varied considerably with respect to the type of intervention assessed, study design, and length of intervention assessment. Few studies have assessed interventions designed explicitly for the unique challenges facing immunization programs in urban areas. Further research on sustainability, scalability, and cost-effectiveness of interventions is needed to fill this gap. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing strategies for increasing urban routine immunization coverage of childhood vaccines in low and middle-income countries: A systematic review of peer-reviewed literature

PubMed Central

Nelson, Kristin N.; Wallace, Aaron S.; Sodha, Samir V.; Daniels, Danni; Dietz, Vance

2016-01-01

Introduction Immunization programs in developing countries increasingly face challenges to ensure equitable delivery of services within cities where rapid urban growth can result in informal settlements, poor living conditions, and heterogeneous populations. A number of strategies have been utilized in developing countries to ensure high community demand and equitable availability of urban immunization services; however, a synthesis of the literature on these strategies has not previously been undertaken. Methods We reviewed articles published in English in peer-reviewed journals between 1990 and 2013 that assessed interventions for improving routine immunization coverage in urban areas in low- and middle-income countries. We categorized the intervention in each study into one of three groups: (1) interventions aiming to increase utilization of immunization services; (2) interventions aiming to improve availability of immunization services by healthcare providers, or (3) combined availability and utilization interventions. We summarized the main quantitative outcomes from each study and effective practices from each intervention category. Results Fifteen studies were identified; 87% from the African, Eastern Mediterranean and Southeast Asian regions of the World Health Organization (WHO). Six studies were randomized controlled trials, eight were pre- and post-intervention evaluations, and one was a cross-sectional study. Four described interventions designed to improve availability of routine immunization services, six studies described interventions that aimed to increase utilization, and five studies aiming to improve both availability and utilization of services. All studies reported positive change in their primary outcome indicator, although seven different primary outcomes indicators were used across studies. Studies varied considerably with respect to the type of intervention assessed, study design, and length of intervention assessment. Conclusion Few studies have assessed interventions designed explicitly for the unique challenges facing immunization programs in urban areas. Further research on sustainability, scalability, and cost-effectiveness of interventions is needed to fill this gap. PMID:27692772

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parmesano, Hethie; Kury, Theodore J.

The price of CO{sub 2} emissions allowances affects the structure of the utility's costs, which has implications for rate design and load management programs. Depending on the design of the program to recover these costs, utility total revenue requirements - and the rate design utilized to recover these requirements - may be impacted. A new way to think about rate design may be required. (author)

Youth as Design Partners: Age-Appropriate Websites for Middle and High School Students

ERIC Educational Resources Information Center

Chow, Anthony S.; Smith, Kathelene McCarty; Sun, Katherine

2012-01-01

This study explored the impact of using best practices identified in previous studies in designing age-appropriate websites for middle and high school youth. Utilizing a mixed-method approach, 31 middle and 22 high school youth took part in six focus groups across four states. Participants were introduced to a website specifically designed for…

Economic comparison of fabric filters and electrostatic precipitators for particulate control on coal-fired utility boilers

NASA Technical Reports Server (NTRS)

Cukor, P. M.; Chapman, R. A.

1978-01-01

The uncertainties and associated costs involved in selecting and designing a particulate control device to meet California's air emission regulations are considered. The basic operating principles of electrostatic precipitators and fabric filters are discussed, and design parameters are identified. The size and resulting cost of the control device as a function of design parameters is illustrated by a case study for an 800 MW coal-fired fired utility boiler burning a typical southwestern subbituminous coal. The cost of selecting an undersized particulate control device is compared with the cost of selecting an oversized device.

Efficient hiding of confidential high-utility itemsets with minimal side effects

NASA Astrophysics Data System (ADS)

Lin, Jerry Chun-Wei; Hong, Tzung-Pei; Fournier-Viger, Philippe; Liu, Qiankun; Wong, Jia-Wei; Zhan, Justin

2017-11-01

Privacy preserving data mining (PPDM) is an emerging research problem that has become critical in the last decades. PPDM consists of hiding sensitive information to ensure that it cannot be discovered by data mining algorithms. Several PPDM algorithms have been developed. Most of them are designed for hiding sensitive frequent itemsets or association rules. Hiding sensitive information in a database can have several side effects such as hiding other non-sensitive information and introducing redundant information. Finding the set of itemsets or transactions to be sanitised that minimises side effects is an NP-hard problem. In this paper, a genetic algorithm (GA) using transaction deletion is designed to hide sensitive high-utility itemsets for PPUM. A flexible fitness function with three adjustable weights is used to evaluate the goodness of each chromosome for hiding sensitive high-utility itemsets. To speed up the evolution process, the pre-large concept is adopted in the designed algorithm. It reduces the number of database scans required for verifying the goodness of an evaluated chromosome. Substantial experiments are conducted to compare the performance of the designed GA approach (with/without the pre-large concept), with a GA-based approach relying on transaction insertion and a non-evolutionary algorithm, in terms of execution time, side effects, database integrity and utility integrity. Results demonstrate that the proposed algorithm hides sensitive high-utility itemsets with fewer side effects than previous studies, while preserving high database and utility integrity.

ERDA's central receiver solar thermal power system studies

NASA Technical Reports Server (NTRS)

Lippy, L. J.; Heaton, T. R.

1977-01-01

The utilization of solar energy for electrical power production was studied. Efforts underway on the central receiver solar thermal power system are presented. Preliminary designs are included of pilot plant utilizing large numbers of heliostats in a collector field. Safety hazards are also discussed, as well as the most beneficial location of such a plant within the United States.

Importance and Effectiveness of Student Health Services at a South Texas University

ERIC Educational Resources Information Center

McCaig, Marilyn M.

2013-01-01

The study examined the health needs of students at a south Texas university and documented the utility of the student health center. The descriptive study employed a mixed methods explanatory sequential design (ESD). The non-probability sample consisted of 140 students who utilized the university's health center during the period of March 23-30,…

Improving Urban Corridor that Respect to Public Space

NASA Astrophysics Data System (ADS)

Zahrah, W.; Rahmadhani, N.; Nasution, A. D.; Pane, I. F.

2017-03-01

The urban corridor is more than just a linear space to circulation. It is a place for community activities. Since the urban area in Indonesia functionates without guidelines, it is necessary to analyze how this space being used by the community. The objective of the research is to explore the problems in utilization of public space in Dr. Mansur corridor in Medan and to propose some recommendation to improve it. The survey was started by mapping the physical situation that based on urban design aspects and the activities occur. Based on the data, the study identified the problems of the public space utilization. Next, study selected several buildings that significant in generating public life. The study interviewed the building’s owners and users/customers to get their opinion and perception about the using of urban public space utilization in the corridor in relation to their private function. The study analyzed the problems and opportunity to redesign the buildings that respect to public space. Then, the design ideas were presented to the buildings owners to get their response. The result of the observation shows that the fundamental problem in the corridor is the intervention of the private interest to the street as public space. The study indicates that the majority of the buildings owner was not aware that their buildings had distracted the urban public space. However, they gave a positive respond to the design recommendation. The design offered the solution that provided individual needs without intervention to the public realm. The study can contribute to improving urban corridor by educating the community with architecture and urban design.

Value-based insurance design: benefits beyond cost and utilization.

PubMed

Gibson, Teresa B; Maclean, Ross J; Chernew, Michael E; Fendrick, A Mark; Baigel, Colin

2015-01-01

As value-based insurance design (VBID) programs proliferate, evidence is emerging on the impact of VBID. To date, studies have largely measured VBID impact on utilization, and a few studies have assessed its impact on quality, outcomes, and cost. In this commentary we discuss these domains, summarize evidence, and propose the extension of measurement of VBID impact into areas including workplace productivity and quality of life, employee and patient engagement, and talent attraction and retention. We contend that VBID evaluations should consider a broad variety of programmatic dividends on both humanistic and health-related outcomes.

The utilization of mind map painting on 3D shapes with curved faces

NASA Astrophysics Data System (ADS)

Nur Sholikhah, Ayuk; Usodo, Budi; Pramudya, Ikrar

2017-12-01

This paper aims to study on the use of mind map painting media on material with 3D shapes with curved faces and its effect on student’s interest. Observation and literature studies were applied as the research method with the sake design of utilization of mind map painting. The result of this research is the design of mind map painting media can improve students' ability to solve problems, improve the ability to think, and maximize brain power. In relation, mind map painting in learning activities is considered to improve student interest.

A Top-Down Approach to Designing the Computerized Adaptive Multistage Test

ERIC Educational Resources Information Center

Luo, Xiao; Kim, Doyoung

2018-01-01

The top-down approach to designing a multistage test is relatively understudied in the literature and underused in research and practice. This study introduced a route-based top-down design approach that directly sets design parameters at the test level and utilizes the advanced automated test assembly algorithm seeking global optimality. The…

Community Design for Optimal Energy and Resource Utilization.

ERIC Educational Resources Information Center

Bilenky, Stephen; And Others

Presented is a study which investigated the energy and resource dynamics of a semi-autonomous domestic system for 30 people. The investigation is organized on three levels: (1) developing a preliminary design and design parameters; (2) development and quantification of the energy and resource dynamics; and (3) designing a model to extrapolate…

Competency Capacity Building Needs of Agricultural Science Teachers in Utilization of School Farm for Skill Acquisition among Secondary School Students

ERIC Educational Resources Information Center

Lawal, O. I.; Onipede, Omoleye; Oketoobo, E. A.; Famiwole, Remigius O.

2014-01-01

This study sought to identify the competency capacity building needs of teachers of agricultural science in the utilization of school farm for skill acquisition among secondary school students in Ondo State, Nigeria). Four research questions guided the study. The study adopted the survey research design. The population used was 422, made up of…

Twenty-First Century Energy Policy Making in New Hampshire: Lessons for Collaboration

NASA Astrophysics Data System (ADS)

Herndon, Henry Phillip

In this thesis I investigate the organizational field that is New Hampshire's energy policy-making community as it engages with the state regulatory institution, the Public Utilities Commission, to grapple the challenges of designing a 21st century electricity marketplace. The Public Utilities Commission structure and function are evolving. Historically, the Commission has used adjudicative proceedings to carry out a ratemaking function for monopoly utilities. The Commission's adjudicative process is evolving to become increasingly collaborative as it begins to carry out its new function of 21st century electricity market design. I analyze both the new structure (collaboration) and the new function (21 st century electricity market design) of the Commission through three in-depth case studies of dockets (policy-making processes): Energy Efficiency Resource Standard, Electric Grid Modernization, and Net Metering. My findings identify ways in which the Public Utilities Commission structure for making energy policy decisions is flexible and may be shaped by stakeholders engaging in policy processes. Stakeholders have the power to collectively design regulatory proceedings to incorporate greater opportunities for collaboration to better suit the challenges posed by a 21st century electricity sector. I provide recommendations on how that redesign should occur.

Student Housing Cost Study.

ERIC Educational Resources Information Center

California Univ., Berkeley. Univ. Residential Building System.

Target costs for the University Residential Building System (URBS) Project of the University of California are presented. Findings depict the effectiveness of building design and material applications and should be useful in guiding future student housing design work, whether the design utilizes the URBS system or not. Ten recently constructed…

Load research manual. Volume 2: Fundamentals of implementing load research procedures

NASA Astrophysics Data System (ADS)

1980-11-01

This manual will assist electric utilities and state regulatory authorities in investigating customer electricity demand as part of cost-of-service studies, rate design, marketing research, system design, load forecasting, rate reform analysis, and load management research. Load research procedures are described in detail. Research programs at three utilities are compared: Carolina Power and Light Company, Long Island Lighting Company, and Southern California Edison Company. A load research bibliography and glossaries of load research and statistical terms are also included.

Getting in Touch with Paramedic Student Career Intentions

ERIC Educational Resources Information Center

O'Meara, Peter; Tourle, Vianne; Madigan, Veronica; Lighton, David

2012-01-01

Objective: This study of paramedic and nursing/paramedic students aimed to determine the initial career intentions of full-time paramedic students and to identify the key factors that influence their career choices. Design: A longitudinal study design, utilizing surveys and a focus group, was employed. Setting: The study was conducted in an…

Strategically Focused Training in Six Sigma Way: A Case Study

ERIC Educational Resources Information Center

Pandey, Ashish

2007-01-01

Purpose: The purpose of the current study is to examine the utility of Six Sigma interventions as a performance measure and explore its applicability for making the training design and delivery operationally efficient and strategically effective. Design/methodology/approach: This is a single revelatory case study. Data were collected from multiple…

Utilization of Design Principles for Hybrid Learning Configurations by Interprofessional Design Teams

ERIC Educational Resources Information Center

Cremers, Petra H. M.; Wals, Arjen E. J.; Wesselink, Renate; Mulder, Martin

2017-01-01

Educational design research yields design knowledge, often in the form of design principles or guidelines that provide the rationale or "know-why" for the design of educational interventions. As such, design principles can be utilized by designers in contexts other than the research context in which they were generated. Although research…

A study of a space communication system for the control and monitoring of the electric distribution system. Volume 2: Supporting data and analyses

NASA Technical Reports Server (NTRS)

Vaisnys, A.

1980-01-01

It is technically feasible to design a satellite communication system to serve the United States electric utility industry's needs relative to load management, real-time operations management, remote meter reading and to determine the costs of various elements of the system. The functions associated with distribution automation and control and communication system requirements are defined. Factors related to formulating viable communication concepts, the relationship of various design factors to utility operating practices, and the results of the cost analysis are discussed The system concept and several ways in which the concept could be integrated into the utility industry are described.

Theory of reasoned action and theory of planned behavior-based dietary interventions in adolescents and young adults: a systematic review

PubMed Central

Hackman, Christine L; Knowlden, Adam P

2014-01-01

Background Childhood obesity has reached epidemic proportions in many nations around the world. The theory of planned behavior (TPB) and the theory of reasoned action (TRA) have been used to successfully plan and evaluate numerous interventions for many different behaviors. The aim of this study was to systematically review and synthesize TPB and TRA-based dietary behavior interventions targeting adolescents and young adults. Methods The following databases were systematically searched to find articles for this review: Academic Search Premier; Cumulative Index to Nursing and Allied Health (CINAHL); Education Resources Information Center (ERIC); Health Source: Nursing/Academic Edition; Cochrane Central Register of Controlled Trials (CENTRAL); and MEDLINE. Inclusion criteria for articles were: 1) primary or secondary interventions, 2) with any quantitative design, 3) published in the English language, 4) between January 2003 and March 2014, 5) that targeted adolescents or young adults, 6) which included dietary change behavior as the outcome, and 7) utilized TPB or TRA. Results Of the eleven intervention studies evaluated, nine resulted in dietary behavior change that was attributed to the treatment. Additionally, all but one study found there to be a change in at least one construct of TRA or TPB, while one study did not measure constructs. All of the studies utilized some type of quantitative design, with two employing quasi-experimental, and eight employing randomized control trial design. Among the studies, four utilized technology including emails, social media posts, information on school websites, web-based activities, audio messages in classrooms, interactive DVDs, and health-related websites. Two studies incorporated goal setting and four employed persuasive communication. Conclusion Interventions directed toward changing dietary behaviors in adolescents should aim to incorporate multi-faceted, theory-based approaches. Future studies should consider utilizing randomized control trial design and operationalize variables. More research is needed to identify the optimal TPB and TRA modalities to modify dietary behaviors. PMID:24966710

Theory of reasoned action and theory of planned behavior-based dietary interventions in adolescents and young adults: a systematic review.

PubMed

Hackman, Christine L; Knowlden, Adam P

2014-01-01

Childhood obesity has reached epidemic proportions in many nations around the world. The theory of planned behavior (TPB) and the theory of reasoned action (TRA) have been used to successfully plan and evaluate numerous interventions for many different behaviors. The aim of this study was to systematically review and synthesize TPB and TRA-based dietary behavior interventions targeting adolescents and young adults. THE FOLLOWING DATABASES WERE SYSTEMATICALLY SEARCHED TO FIND ARTICLES FOR THIS REVIEW: Academic Search Premier; Cumulative Index to Nursing and Allied Health (CINAHL); Education Resources Information Center (ERIC); Health Source: Nursing/Academic Edition; Cochrane Central Register of Controlled Trials (CENTRAL); and MEDLINE. Inclusion criteria for articles were: 1) primary or secondary interventions, 2) with any quantitative design, 3) published in the English language, 4) between January 2003 and March 2014, 5) that targeted adolescents or young adults, 6) which included dietary change behavior as the outcome, and 7) utilized TPB or TRA. Of the eleven intervention studies evaluated, nine resulted in dietary behavior change that was attributed to the treatment. Additionally, all but one study found there to be a change in at least one construct of TRA or TPB, while one study did not measure constructs. All of the studies utilized some type of quantitative design, with two employing quasi-experimental, and eight employing randomized control trial design. Among the studies, four utilized technology including emails, social media posts, information on school websites, web-based activities, audio messages in classrooms, interactive DVDs, and health-related websites. Two studies incorporated goal setting and four employed persuasive communication. Interventions directed toward changing dietary behaviors in adolescents should aim to incorporate multi-faceted, theory-based approaches. Future studies should consider utilizing randomized control trial design and operationalize variables. More research is needed to identify the optimal TPB and TRA modalities to modify dietary behaviors.

Design study of wind turbines 50 kW to 3000 kW for electric utility applications. Volume 1: Summary report

NASA Technical Reports Server (NTRS)

1976-01-01

Wind turbine configurations that would lead to generation of electrical power in a cost effective manner were considered. All possible overall system configurationss, operating modes, and sybsystem concepts were evaluated for both technical feasibility and compatibility with utility networks, as well as for economic attractiveness. A design optimization computer code was developed to determine the cost sensitivity of the various design features, and thus establish the configuration and design conditions that would minimize the generated energy costs. The preliminary designs of both a 500 kW unit and a 1500 kW unit operating in a 12 mph and 18 mph median wind speed respectively, were developed. The rationale employed and the key findings are summarized.

Factors Associated with the Utilization and Quality of Prenatal Care in Western Rural Regions of China

ERIC Educational Resources Information Center

Dongxu, Wang; Yuhui, Shi; Stewart, Donald; Chun, Chang; Chaoyang, Li

2012-01-01

Purpose: The paper seeks to identify key features of prenatal care utilization and quality in western regions of China and to determine the factors affecting the quality of prenatal care. Design/methodology/approach: A descriptive, cross-sectional study was conducted. The instrument for the study was a 10-stem respondent-administered, structured…

The Effects of Model Making on Design and Learning in Landscape Architecture Education

ERIC Educational Resources Information Center

Duzenli, Tugba; Yilmaz, Serap; Alpak, Elif Merve

2017-01-01

Purpose: One of the modeling methods used in the training of all design disciplines is physical model making. This study investigates the model-making technique and emphasizes the positive effects of model-making and its utility in the academic setting in order to understand its effects on design and learning. The "Equipment Design"…

The Study on Human-Computer Interaction Design Based on the Users’ Subconscious Behavior

NASA Astrophysics Data System (ADS)

Li, Lingyuan

2017-09-01

Human-computer interaction is human-centered. An excellent interaction design should focus on the study of user experience, which greatly comes from the consistence between design and human behavioral habit. However, users’ behavioral habits often result from subconsciousness. Therefore, it is smart to utilize users’ subconscious behavior to achieve design's intention and maximize the value of products’ functions, which gradually becomes a new trend in this field.

Visual Design as a Holistic Experience: How Students Engage with Instructional Materials of Various Visual Designs

ERIC Educational Resources Information Center

Tomita, Kei

2017-01-01

This study explored factors thought to affect college students' selection and experience of instructional materials by utilizing general procedures of Giorgi's (2012) descriptive phenomenological psychological method and Spradley's (1979) approach to interpretation. Twenty-five undergraduate students were asked to study finite mathematics…

Linking Brief Functional Analysis to Intervention Design in General Education Settings

ERIC Educational Resources Information Center

Ishuin, Tifanie

2009-01-01

This study focused on the utility and applicability of brief functional analysis in general education settings. The purpose of the study was to first identify the environmental variables maintaining noncompliance through a brief functional analysis, and then to design and implement a functionally equivalent intervention. The participant exhibited…

41 CFR 109-43.302-50 - Utilization by designated contractors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... designated contractors. 109-43.302-50 Section 109-43.302-50 Public Contracts and Property Management Federal... Utilization by designated contractors. Heads of field organizations may authorize designated contractors to... Federal agency, provided the designated contractors have written policies and procedures. ...

Utilization of Information and Communication Technology (ICT) Resources and Job Effectiveness among Library Staff in the University of Calabar and Cross River University of Technology, Nigeria

ERIC Educational Resources Information Center

Ntui, Aniebiet Inyang; Inyang, Comfort Linus

2015-01-01

This study investigated utilization of Information and Communication Technology (ICT) resources and job effectiveness among library staff in the University of Calabar and Cross River University of Technology, Nigeria. To achieve the purpose of this study, four hypotheses were formulated to guide the study. Ex-post facto research design was adopted…

Conceptual design studies of 1985 commercial VTOL transports that utilized rotors, Volume 1

NASA Technical Reports Server (NTRS)

Magee, J. P.; Clark, R. D.; Alexander, H. R.

1974-01-01

Results of conceptual design studies of commercial rotary wing transport aircraft for the 1985 time period are presented. Two aircraft configurations, a tandem helicopter and a tilt rotor, were designed for a 200 nautical mile short haul mission with an upper limit of 100 passengers. In addition to the baseline aircraft two further designs of each configuration are included to assess the impact of external noise design criteria on the aircraft size, weight, and cost.

Utilization of structural steel in buildings.

PubMed

Moynihan, Muiris C; Allwood, Julian M

2014-08-08

Over one-quarter of steel produced annually is used in the construction of buildings. Making this steel causes carbon dioxide emissions, which climate change experts recommend be reduced by half in the next 37 years. One option to achieve this is to design and build more efficiently, still delivering the same service from buildings but using less steel to do so. To estimate how much steel could be saved from this option, 23 steel-framed building designs are studied, sourced from leading UK engineering firms. The utilization of each beam is found and buildings are analysed to find patterns. The results for over 10 000 beams show that average utilization is below 50% of their capacity. The primary reason for this low value is 'rationalization'-providing extra material to reduce labour costs. By designing for minimum material rather than minimum cost, steel use in buildings could be drastically reduced, leading to an equivalent reduction in 'embodied' carbon emissions.

Design and evaluation of fluidized bed heat recovery for diesel engine systems

NASA Technical Reports Server (NTRS)

Hamm, J. R.; Newby, R. A.; Vidt, E. J.; Lippert, T. E.

1985-01-01

The potential of utilizing fluidized bed heat exchangers in place of conventional counter-flow heat exchangers for heat recovery from adiabatic diesel engine exhaust gas streams was studied. Fluidized bed heat recovery systems were evaluated in three different heavy duty transport applications: (1) heavy duty diesel truck; (2) diesel locomotives; and (3) diesel marine pushboat. The three applications are characterized by differences in overall power output and annual utilization. For each application, the exhaust gas source is a turbocharged-adiabatic diesel core. Representative subposed exhaust gas heat utilization power cycles were selected for conceptual design efforts including design layouts and performance estimates for the fluidized bed heat recovery heat exchangers. The selected power cycles were: organic rankine with RC-1 working fluid, turbocompound power turbine with steam injection, and stirling engine. Fuel economy improvement predictions are used in conjunction with capital cost estimates and fuel price data to determine payback times for the various cases.

Inverse transonic airfoil design methods including boundary layer and viscous interaction effects

NASA Technical Reports Server (NTRS)

Carlson, L. A.

1979-01-01

The development and incorporation into TRANDES of a fully conservative analysis method utilizing the artificial compressibility approach is described. The method allows for lifting cases and finite thickness airfoils and utilizes a stretched coordinate system. Wave drag and massive separation studies are also discussed.

ETV Programmes: Review of Research.

ERIC Educational Resources Information Center

Chaudhary, Sohanvir; Panda, Santosh

1997-01-01

Reviews research on educational television (ETV), focusing on teacher and student attitudes; impact on children and teachers and in-service education in media; and utilization. Also reviews a few studies on the impact and utilization of educational radio broadcasts. Draws broad conclusions about the use, design, and learning process of ETV. (PEN)

Understanding How Adolescents with Reading Difficulties Utilize Technology-Based Tools

ERIC Educational Resources Information Center

Marino, Matthew T.

2009-01-01

This article reports the findings from a study that examined how adolescent students with reading difficulties utilized cognitive tools that were embedded in a technology-based middle school science curriculum. The curriculum contained salient features of the Universal Design for Learning (UDL) theoretical framework. Sixteen general education…

Optimization in the utility maximization framework for conservation planning: a comparison of solution procedures in a study of multifunctional agriculture

PubMed Central

Stoms, David M.; Davis, Frank W.

2014-01-01

Quantitative methods of spatial conservation prioritization have traditionally been applied to issues in conservation biology and reserve design, though their use in other types of natural resource management is growing. The utility maximization problem is one form of a covering problem where multiple criteria can represent the expected social benefits of conservation action. This approach allows flexibility with a problem formulation that is more general than typical reserve design problems, though the solution methods are very similar. However, few studies have addressed optimization in utility maximization problems for conservation planning, and the effect of solution procedure is largely unquantified. Therefore, this study mapped five criteria describing elements of multifunctional agriculture to determine a hypothetical conservation resource allocation plan for agricultural land conservation in the Central Valley of CA, USA. We compared solution procedures within the utility maximization framework to determine the difference between an open source integer programming approach and a greedy heuristic, and find gains from optimization of up to 12%. We also model land availability for conservation action as a stochastic process and determine the decline in total utility compared to the globally optimal set using both solution algorithms. Our results are comparable to other studies illustrating the benefits of optimization for different conservation planning problems, and highlight the importance of maximizing the effectiveness of limited funding for conservation and natural resource management. PMID:25538868

Optimization in the utility maximization framework for conservation planning: a comparison of solution procedures in a study of multifunctional agriculture

USGS Publications Warehouse

Kreitler, Jason R.; Stoms, David M.; Davis, Frank W.

2014-01-01

Quantitative methods of spatial conservation prioritization have traditionally been applied to issues in conservation biology and reserve design, though their use in other types of natural resource management is growing. The utility maximization problem is one form of a covering problem where multiple criteria can represent the expected social benefits of conservation action. This approach allows flexibility with a problem formulation that is more general than typical reserve design problems, though the solution methods are very similar. However, few studies have addressed optimization in utility maximization problems for conservation planning, and the effect of solution procedure is largely unquantified. Therefore, this study mapped five criteria describing elements of multifunctional agriculture to determine a hypothetical conservation resource allocation plan for agricultural land conservation in the Central Valley of CA, USA. We compared solution procedures within the utility maximization framework to determine the difference between an open source integer programming approach and a greedy heuristic, and find gains from optimization of up to 12%. We also model land availability for conservation action as a stochastic process and determine the decline in total utility compared to the globally optimal set using both solution algorithms. Our results are comparable to other studies illustrating the benefits of optimization for different conservation planning problems, and highlight the importance of maximizing the effectiveness of limited funding for conservation and natural resource management.

Mining of high utility-probability sequential patterns from uncertain databases

PubMed Central

Zhang, Binbin; Fournier-Viger, Philippe; Li, Ting

2017-01-01

High-utility sequential pattern mining (HUSPM) has become an important issue in the field of data mining. Several HUSPM algorithms have been designed to mine high-utility sequential patterns (HUPSPs). They have been applied in several real-life situations such as for consumer behavior analysis and event detection in sensor networks. Nonetheless, most studies on HUSPM have focused on mining HUPSPs in precise data. But in real-life, uncertainty is an important factor as data is collected using various types of sensors that are more or less accurate. Hence, data collected in a real-life database can be annotated with existing probabilities. This paper presents a novel pattern mining framework called high utility-probability sequential pattern mining (HUPSPM) for mining high utility-probability sequential patterns (HUPSPs) in uncertain sequence databases. A baseline algorithm with three optional pruning strategies is presented to mine HUPSPs. Moroever, to speed up the mining process, a projection mechanism is designed to create a database projection for each processed sequence, which is smaller than the original database. Thus, the number of unpromising candidates can be greatly reduced, as well as the execution time for mining HUPSPs. Substantial experiments both on real-life and synthetic datasets show that the designed algorithm performs well in terms of runtime, number of candidates, memory usage, and scalability for different minimum utility and minimum probability thresholds. PMID:28742847

Effects of Cloze Instructional Approach on Senior Secondary School Students' Achievement in Igbo Language Reading Comprehension

ERIC Educational Resources Information Center

Eze, Nneka Justina

2015-01-01

This study assessed the effects of cloze instructional approach on senior secondary school students' achievement in Igbo language reading comprehension. The study utilized a quasi experimental research design of the pretest posttest non-equivalent control group design. The study was conducted in Abakaliki education zone of Ebonyi State of Nigeria.…

What Equivocal Data from Single Case Comparison Studies Reveal about Evidence-Based Practices in Early Childhood Special Education

ERIC Educational Resources Information Center

Ledford, Jennifer R.; Barton, Erin E.; Hardy, Jessica K.; Elam, Katie; Seabolt, Jordan; Shanks, Meredith; Hemmeter, M. L.; Kaiser, Ann

2016-01-01

Although comparison studies are important in early intervention/early childhood special education (EI/ECSE), results of well-designed comparison studies are likely to be unpublished because of undifferentiated or differently differentiated results across participants. The purpose of this article is to highlight the utility of comparison designs in…

Analyses of Public Utility Building - Students Designs, Aimed at their Energy Efficiency Improvement

NASA Astrophysics Data System (ADS)

Wołoszyn, Marek Adam

2017-10-01

Public utility buildings are formally, structurally and functionally complex entities. Frequently, the process of their design involves the retroactive reconsideration of energy engineering issues, once a building concept has already been completed. At that stage, minor formal corrections are made along with the design of the external layer of the building in order to satisfy applicable standards. Architecture students do the same when designing assigned public utility buildings. In order to demonstrate energy-related defects of building designs developed by students, the conduct of analyses was proposed. The completed designs of public utility buildings were examined with regard to energy efficiency of the solutions they feature through the application of the following programs: Ecotect, Vasari, and in case of simpler analyses ArchiCad program extensions were sufficient.

Development of Parametric Mass and Volume Models for an Aerospace SOFC/Gas Turbine Hybrid System

NASA Technical Reports Server (NTRS)

Tornabene, Robert; Wang, Xiao-yen; Steffen, Christopher J., Jr.; Freeh, Joshua E.

2005-01-01

In aerospace power systems, mass and volume are key considerations to produce a viable design. The utilization of fuel cells is being studied for a commercial aircraft electrical power unit. Based on preliminary analyses, a SOFC/gas turbine system may be a potential solution. This paper describes the parametric mass and volume models that are used to assess an aerospace hybrid system design. The design tool utilizes input from the thermodynamic system model and produces component sizing, performance, and mass estimates. The software is designed such that the thermodynamic model is linked to the mass and volume model to provide immediate feedback during the design process. It allows for automating an optimization process that accounts for mass and volume in its figure of merit. Each component in the system is modeled with a combination of theoretical and empirical approaches. A description of the assumptions and design analyses is presented.

Biomarker-Guided Adaptive Trial Designs in Phase II and Phase III: A Methodological Review

PubMed Central

Antoniou, Miranta; Jorgensen, Andrea L; Kolamunnage-Dona, Ruwanthi

2016-01-01

Background Personalized medicine is a growing area of research which aims to tailor the treatment given to a patient according to one or more personal characteristics. These characteristics can be demographic such as age or gender, or biological such as a genetic or other biomarker. Prior to utilizing a patient’s biomarker information in clinical practice, robust testing in terms of analytical validity, clinical validity and clinical utility is necessary. A number of clinical trial designs have been proposed for testing a biomarker’s clinical utility, including Phase II and Phase III clinical trials which aim to test the effectiveness of a biomarker-guided approach to treatment; these designs can be broadly classified into adaptive and non-adaptive. While adaptive designs allow planned modifications based on accumulating information during a trial, non-adaptive designs are typically simpler but less flexible. Methods and Findings We have undertaken a comprehensive review of biomarker-guided adaptive trial designs proposed in the past decade. We have identified eight distinct biomarker-guided adaptive designs and nine variations from 107 studies. Substantial variability has been observed in terms of how trial designs are described and particularly in the terminology used by different authors. We have graphically displayed the current biomarker-guided adaptive trial designs and summarised the characteristics of each design. Conclusions Our in-depth overview provides future researchers with clarity in definition, methodology and terminology for biomarker-guided adaptive trial designs. PMID:26910238

Design Report Final - CUB Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armijo, Kenneth Miguel; Monda, Mark J.; Brunson, Gregory Paul

CUB (Critical Utility Base), Fig. 1.0, are individual portable energy and utility units utilizing renewable energy technologies integrated with high efficient conventional components to provide electricity, battery storage, heat, potable water, waste water treatment, cooling, liquid fuels, to name some of the primary utilities. Typically, these units were designed to provide power / utilities to any remote location or facility like forward operating bases, disaster relief centers, and Native American communities or to energize African villages. Although some CUB models have already been designed to date, the main unit, the CUB-E (electricity), lacks a critical component included in its design.more » It is the integral portion that automates solar electric panel racking deployment and retraction. This racking system will enable the CUB-E to rapidly deploy its utility within minutes, a feature not available in any form currently on the market.« less

Risk Factors for Nursing Home Placement in Alzheimer's Disease: A Longitudinal Study of Cognition, ADL, Service Utilization, and Cholinesterase Inhibitor Treatment

ERIC Educational Resources Information Center

Wattmo, Carina; Wallin, Asa K.; Londos, Elisabet; Minthon, Lennart

2011-01-01

Purpose of the Study: To identify risk factors for early nursing home placement (NHP) in Alzheimer's disease (AD), focusing on the impact of longitudinal change in cognition, activities of daily living (ADL), service utilization, and cholinesterase inhibitor treatment (ChEI). Design and Methods: In an open, 3-year, prospective, multicenter study…

Personal Factors as Determinants of Utilization of Development Information in Rural Communities of South-South Geo-Political Zone, Nigeria

ERIC Educational Resources Information Center

Edet, Itari Paul; Bullem, Anthony Godwin; Okeme, Isaac

2015-01-01

This study investigated the extent to which personal factors relate to the utilization of development information in the rural communities of South-South Geo-political Zone, Nigeria. The study adopted the descriptive survey design. The population comprised all adult male and female rural dwellers from the three out of the six states in the Zone…

User-centered design and evaluation of a next generation fixed-split ergonomic keyboard.

PubMed

McLoone, Hugh E; Jacobson, Melissa; Hegg, Chau; Johnson, Peter W

2010-01-01

Research has shown that fixed-split, ergonomic keyboards lessen the pain and functional status in symptomatic individuals as well as reduce the likelihood of developing musculoskeletal disorders in asymptomatic typists over extended use. The goal of this study was to evaluate design features to determine whether the current fixed-split ergonomic keyboard design could be improved. Thirty-nine, adult-aged, fixed-split ergonomic keyboard users were recruited to participate in one of three studies. First utilizing non-functional models and later a functional prototype, three studies evaluated keyboard design features including: 1) keyboard lateral inclination, 2) wrist rest height, 3) keyboard slope, and 4) curved "gull-wing" key layouts. The findings indicated that keyboard lateral inclination could be increased from 8° to 14°; wrist rest height could be increased up to 10 mm from current setting; positive, flat, and negative slope settings were equally preferred and facilitated greater postural variation; and participants preferred a new gull-wing key layout. The design changes reduced forearm pronation and wrist extension while not adversely affecting typing performance. This research demonstrated how iterative-evaluative, user-centered research methods can be utilized to improve a product's design such as a fixed-split ergonomic keyboard.

Technology Utilization House Study Report. [For Energy Conservation

NASA Technical Reports Server (NTRS)

1974-01-01

The objectives of Project TECH are: (1) to construct a single family detached dwelling for demonstrating the application of advanced technology and minimizing the requirement for energy and utility services, and (2) to help influence future development in home construction by defining the interaction of integrated energy and water management systems with building configuration and construction materials. Components and methods expected to be cost effective over a 20 year span were studied. Emphasis was placed on the utilization of natural heating and cooling characteristics. Orientation and location of windows, landscaping, natural ventilation, and characteristics of the local climate and microclimate were intended to be used to best advantage. Energy conserving homes are most efficient when design for specific sites, therefore project TECH should not be considered a prototype design suitable for all locations. However, it does provide ideas and analytical methods which can be applied to some degree in all housing.

Educational Game Design as Gateway for Operationalizing Computational Thinking Skills among Middle School Students

ERIC Educational Resources Information Center

Wu, Min Lun

2018-01-01

This qualitative case study reports descriptive findings of digital game-based learning involving 15 Taiwanese middle school students' use of computational thinking skills elicited through programmed activities in a game design workshop. Situated learning theory is utilized as framework to evaluate novice game designers' individual advancement in…

Planned Missing Data Designs with Small Sample Sizes: How Small Is Too Small?

ERIC Educational Resources Information Center

Jia, Fan; Moore, E. Whitney G.; Kinai, Richard; Crowe, Kelly S.; Schoemann, Alexander M.; Little, Todd D.

2014-01-01

Utilizing planned missing data (PMD) designs (ex. 3-form surveys) enables researchers to ask participants fewer questions during the data collection process. An important question, however, is just how few participants are needed to effectively employ planned missing data designs in research studies. This article explores this question by using…

Design study of wind turbines 50 kW to 3000 kW for electric utility applications. Volume 2: Analysis and design

NASA Technical Reports Server (NTRS)

1976-01-01

All possible overall system configurations, operating modes, and subsystem concepts for a wind turbine configuration for cost effective generation of electrical power were evaluated for both technical feasibility and compatibility with utility networks, as well as for economic attractiveness. A design optimization computer code was developed to determine the cost sensitivity of the various design features, and thus establish the configuration and design conditions that would minimize the generated energy costs. The preliminary designs of both a 500 kW unit and a 1500 kW unit operating in a 12 mph and 18 mph median wind speed respectively, were developed. The various design features and components evaluated are described, and the rationale employed to select the final design configuration is given. All pertinent technical performance data and component cost data is included. The costs of all major subassemblies are estimated and the resultant energy costs for both the 500 kW and 1500 kW units are calculated.

A Phenomenological Study of the International Student Experience at an American College

ERIC Educational Resources Information Center

Exposito, Julie Anderson

2015-01-01

This applied dissertation was designed to explore and provide a better understanding of students of international background enrolled in an English for Academic Purposes (EAP) at a 4-year public American college in Southeast Florida. This study utilized a qualitative phenomenological design for data collection and analysis. The interview protocol…

The Design of Workshops for Asian Second Level Schools. Study 5.

ERIC Educational Resources Information Center

Khan, Khurshid A.; Vickery, D. J.

The utilization of workshop accomodations in the countries of the Asian Region are examined and the study concludes that, in most schools, a single multipurpose workshop is more economical than the separate workshops for separate crafts that are in common use at present. Design criteria are developed for multipurpose "industrial arts"…

A Mars orbiter mission design

NASA Astrophysics Data System (ADS)

Castronuovo, Marco M.

1992-08-01

A preliminary study of a new orbiter mission to Mars using an earth gravity assist is presented. The trajectory resulting from this study has been evaluated utilizing Everhart's (1985) integrator RADAU. The mission sequences are described and compared to other proposed mission designs and some mission opportunities for the years 1997 to 2014 are discussed.

Viability, Advantages and Design Methodologies of M-Learning Delivery

ERIC Educational Resources Information Center

Zabel, Todd W.

2010-01-01

The purpose of this study was to examine the viability and principle design methodologies of Mobile Learning models in developing regions. Demographic and market studies were utilized to determine the viability of M-Learning delivery as well as best uses for such technologies and methods given socioeconomic and political conditions within the…

Quasi-experimental Studies in the Fields of Infection Control and Antibiotic Resistance, Ten Years Later: A Systematic Review.

PubMed

Alsaggaf, Rotana; O'Hara, Lyndsay M; Stafford, Kristen A; Leekha, Surbhi; Harris, Anthony D

2018-02-01

OBJECTIVE A systematic review of quasi-experimental studies in the field of infectious diseases was published in 2005. The aim of this study was to assess improvements in the design and reporting of quasi-experiments 10 years after the initial review. We also aimed to report the statistical methods used to analyze quasi-experimental data. DESIGN Systematic review of articles published from January 1, 2013, to December 31, 2014, in 4 major infectious disease journals. METHODS Quasi-experimental studies focused on infection control and antibiotic resistance were identified and classified based on 4 criteria: (1) type of quasi-experimental design used, (2) justification of the use of the design, (3) use of correct nomenclature to describe the design, and (4) statistical methods used. RESULTS Of 2,600 articles, 173 (7%) featured a quasi-experimental design, compared to 73 of 2,320 articles (3%) in the previous review (P<.01). Moreover, 21 articles (12%) utilized a study design with a control group; 6 (3.5%) justified the use of a quasi-experimental design; and 68 (39%) identified their design using the correct nomenclature. In addition, 2-group statistical tests were used in 75 studies (43%); 58 studies (34%) used standard regression analysis; 18 (10%) used segmented regression analysis; 7 (4%) used standard time-series analysis; 5 (3%) used segmented time-series analysis; and 10 (6%) did not utilize statistical methods for comparisons. CONCLUSIONS While some progress occurred over the decade, it is crucial to continue improving the design and reporting of quasi-experimental studies in the fields of infection control and antibiotic resistance to better evaluate the effectiveness of important interventions. Infect Control Hosp Epidemiol 2018;39:170-176.

A Miniature Electromechanical Generator Design Utilizing Human Motion

DTIC Science & Technology

2010-09-01

Inductance Operating Range In the previous chapter, it was mentioned that the EMF induced from the generator was related to a time-changing magnetic...ELECTROMECHANICAL GENERATOR DESIGN UTILIZING HUMAN MOTION by Nicholas G. Hoffman September 2010 Thesis Co-Advisors: Alexander L. Julian...AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE A Miniature Electromechanical Generator Design Utilizing Human Motion 5. FUNDING NUMBERS

The utilization of websites for fundraising by NCI-designated cancer centers: Examining the capacity for dialogic communication with prospective donors.

PubMed

Erwin, Cathleen O; Dias, Ashley M

2016-01-01

The study employs a dialogic public relations framework to explore the utilization of the Internet for fundraising by nonprofit health care organizations-specifically, NCI-designated cancer centers. Cancer centers have been noted for effective websites and for being highly engaged in fundraising, which is characterized as relationship marketing. Results indicate all but one cancer center use websites and social media for fundraising but are limited in capacity for two-way symmetrical dialogue. Results are discussed and recommendations are made for future research.

Localisation of flow separation and transition over a pitching NACA0012 airfoil at transitional Reynolds number

NASA Astrophysics Data System (ADS)

Rudmin, Daniel

Ionic polymer-metal composites (IPMCs) are some of the most well-known electro-active polymers. This is due to their large deformation provided a relatively low voltage source. IPMCs have been acknowledged as a potential candidate for biomedical applications such as cardiac catheters and surgical probes; however, there is still no existing mass manufacturing of IPMCs. This study intends to provide a theoretical framework which could be used to design practical purpose IPMCs depending on the end users interest. This study begins by investigating methodologies used to develop quantify the physical actuation of an IPMC in 3-dimensional space. This approach is taken in two separate means; however, both approaches utilize the finite element method. The first approach utilizes the finite element method in order to describe the dynamic response of a segmented IPMC actuator. The first approach manually constructs each element with a local coordinate system. Each system undergoes a rigid body motion along the element and deformation of the element is expressed in the local coordinate frame. The physical phenomenon in this system is simplified by utilizing a lumped RC model in order to simplify the electro-mechanical phenomena in the IPMC dynamics. The second study investigates 3D modeling of a rod shaped IPMC actuator by explicitly coupling electrostatics, transport phenomenon, and solid mechanics. This portion of the research will briefly discuss the mathematical background that more accurately quantifies the physical phenomena. Solving for the 3-dimensional actuation is explicitly carried out again by utilizing the finite element method. The numerical result is conducted in a software package known as COMSOL MULTIPHYSICS. This simulation allows for explicit geometric rendering as well as more explicit quantification of the physical quantities such as concentration, electric field, and deflection. The final study will conduct design optimization on the COMSOL simulation in order to provide conceptual motivation for future designs. Utilizing a multi-physics analysis approach on a three dimensional cylinder and tube type IPMC provides physically accurate results for time dependent end effector displacement given a voltage source. Simulations are conducted with the finite element method and are also validated with empirical evidences. Having an in-depth understanding of the physical coupling provides optimal design parameters that cannot be altered from a standard electro-mechanical coupling. These parameters are altered in order to determine optimal designs for end-effector displacement, maximum force, and improved mobility with limited voltage magnitude. Design alterations are conducted on the electrode patterns in order to provide greater mobility, electrode size for efficient bending, and Nafion diameter for improved force. The results of this study will provide optimal design parameters of the IPMC for different applications.

Utilizing PowerPoint Presentation to Promote Fall Prevention among Older Adults

ERIC Educational Resources Information Center

McCrary-Quarles, Audrey R.

2008-01-01

This study evaluated a PowerPoint home safety (PPHS) presentation in enhancing awareness, knowledge and behavior change among senior center attendees in southern Illinois. Twelve centers were utilized as data collection sites in a pretest-posttest control group design. Through stratified randomization, centers were placed into categories (high,…

A Critical Examination of Senior Executive Leadership Succession Planning and Management with Implications for Underrepresented Minorities

ERIC Educational Resources Information Center

Jackson, LeKeisha D.

2017-01-01

Guided by the research questions, this study utilized a sequential explanatory mixed methods research design to examine senior executive leadership succession planning at four-year, predominately white, doctoral universities in the state of Georgia. Utilizing the Representative Bureaucracy theory and the Mateso SPM conceptual model, this study…

An appraisal of the utility or futility of ENT consultant postal questionnaires.

PubMed

Ryan, Stephen; Saunders, J; Clarke, E; Fenton, J E

2013-03-01

Despite an increase in ENT postal questionnaires, the quality of their methodology has been questioned (Ramphul et al. in J Laryngol Otol 119:175-178, 1). This retrospective study examined whether quality and utility of such questionnaires published since 2005 has improved. Seventeen consultant postal questionnaires published between 2005 and 2012 were reviewed. Quality of questionnaires was assessed using a 30-point score based on compliance with 15 criteria previously established to evaluate postal questionnaire study-design (Ramphul et al. in J Laryngol Otol 119:175-178, 1). Citation rates were used as an indicator of utility. The specific comments made in each citing paper was reviewed providing information on whether questionnaire findings (a) had an impact on clinical practice, (b) were the citing comments positive, (c) negative or (d) non-specific. Recurrent methodological flaws were identified in all questionnaires. The average score assigned was 44 %, versus 32 % previously reported (Ramphul et al. in J Laryngol Otol 119:175-178, 1) (P < 0.01, Student's t test). The low citation rate demonstrates poor utility for postal questionnaires. Citations were general non-specific referencing with no clear indication that questionnaire findings positively impacted clinical practice. In conclusion, although the quality of ENT postal questionnaire has improved since the original study (Ramphul et al. in J Laryngol Otol 119:175-178, 1), important recurring methodological flaws still exist. The poor utility, based on low citation rates, also reflects the continued deficiencies in design quality. It is recommended that authors of questionnaire-based research should ensure that guidelines for questionnaire design are adhered in order to improve the validity of findings and hence impact on clinical practice.

New Methods in Design Education: The Systemic Methodology and the Use of Sketch in the Conceptual Design Stage

ERIC Educational Resources Information Center

Westermeyer, Juan Carlos Briede; Ortuno, Bernabe Hernandis

2011-01-01

This study describes the application of a new product concurrent design methodologies in the context in the education of industrial design. The use of the sketch has been utilized many times as a tool of creative expression especially in the conceptual design stage, in an intuitive way and a little out of the context of the reality needs that the…

DOMINO: development of informative molecular markers for phylogenetic and genome-wide population genetic studies in non-model organisms.

PubMed

Frías-López, Cristina; Sánchez-Herrero, José F; Guirao-Rico, Sara; Mora, Elisa; Arnedo, Miquel A; Sánchez-Gracia, Alejandro; Rozas, Julio

2016-12-15

The development of molecular markers is one of the most important challenges in phylogenetic and genome wide population genetics studies, especially in studies with non-model organisms. A highly promising approach for obtaining suitable markers is the utilization of genomic partitioning strategies for the simultaneous discovery and genotyping of a large number of markers. Unfortunately, not all markers obtained from these strategies provide enough information for solving multiple evolutionary questions at a reasonable taxonomic resolution. We have developed Development Of Molecular markers In Non-model Organisms (DOMINO), a bioinformatics tool for informative marker development from both next generation sequencing (NGS) data and pre-computed sequence alignments. The application implements popular NGS tools with new utilities in a highly versatile pipeline specifically designed to discover or select personalized markers at different levels of taxonomic resolution. These markers can be directly used to study the taxa surveyed for their design, utilized for further downstream PCR amplification in a broader set taxonomic scope, or exploited as suitable templates to bait design for target DNA enrichment techniques. We conducted an exhaustive evaluation of the performance of DOMINO via computer simulations and illustrate its utility to find informative markers in an empirical dataset. DOMINO is freely available from www.ub.edu/softevol/domino CONTACT: elsanchez@ub.edu or jrozas@ub.eduSupplementary information: Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Utilizing ego-centric video to conduct naturalistic bicycling studies.

DOT National Transportation Integrated Search

2016-10-01

Existing data collection methods are mostly designed for videos captured by stationary cameras and are not designed to follow cyclists along a : route or to integrate other sensor data. The goals of this research are: a) to develop a platform to coll...

Teachers' Utilization of School Facilities and Academic Achievement of Student Nurses in Human Biology in Schools of Nursing in Akwa Ibom State, Nigeria

ERIC Educational Resources Information Center

Usen, Onodiong Mfreke

2016-01-01

The study examined the relationship between teachers' utilization of school facilities and academic achievement of student nurses in Human Biology in schools of Nursing in Akwa Ibom State. Four (4) specific objectives, four (4) research questions and four (4) null hypotheses were formulated to guide the study. Ex-post facto survey design was…

Utilizing the Cultivating Awareness and Resiliance in Education Program to Enhance Social and Emotional Competence in Preschool and Elementary School Teachers: A Pilot Study

ERIC Educational Resources Information Center

Hraha, Sarah D.

2012-01-01

The following is a pilot study examining the impact of the Cultivating Awareness and Resilience in Education (CARE) program on a group of pre-school and elementary school teachers (n = 11). CARE is a professional development program that utilizes mindfulness practices and emotional awareness skills designed to reduce stress and improve teaching…

12 CFR 1320.13 - Council determination regarding systemic importance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.13 Council determination regarding systemic importance. (a) Designation determination. The Council shall designate a financial market utility if the Council determines that the financial market utility is, or is likely to become...

12 CFR 1320.13 - Council determination regarding systemic importance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.13 Council determination regarding systemic importance. (a) Designation determination. The Council shall designate a financial market utility if the Council determines that the financial market utility is, or is likely to become...

12 CFR 1320.13 - Council determination regarding systemic importance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.13 Council determination regarding systemic importance. (a) Designation determination. The Council shall designate a financial market utility if the Council determines that the financial market utility is, or is likely to become...

A Pre- and Post-Evaluation of Integrating Sustainability Curriculum by Inserting Okala Modules into an Interior Design Materials and Methods Course

ERIC Educational Resources Information Center

Schneiderman, Deborah; Freihoefer, Kara

2012-01-01

Purpose: The purpose of this paper is to examine the integration of Okala curriculum into Interior Design coursework. Okala, as a teaching package, is utilized extensively in industrial design education. However, this study examines the expansion and insertion of Okala modules in an existing interior design curriculum. The Okala modules included…

Haemophilia utilization group study - Part Va (HUGS Va): design, methods and baseline data.

PubMed

Zhou, Z-Y; Wu, J; Baker, J; Curtis, R; Forsberg, A; Huszti, H; Koerper, M; Lou, M; Miller, R; Parish, K; Riske, B; Shapiro, A; Ullman, M; Johnson, K

2011-09-01

To describe the study design, procedures and baseline characteristics of the Haemophilia Utilization Group Study - Part Va (HUGS Va), a US multi-center observational study evaluating the cost of care and burden of illness in persons with factor VIII deficiency. Patients with factor VIII level ≤ 30%, age 2-64 years, receiving treatment at one of six federally supported haemophilia treatment centres (HTCs) were enrolled in the study. Participants completed an initial interview including questions on socio-demographical characteristics, health insurance status, co-morbidities, access to care, haemophilia treatment regimen, factor utilization, self-reported joint pain and motion limitation and health-related quality of life. A periodic follow-up survey collected data regarding time lost from usual activities, disability days, health care utilization and outcomes of care. HTC clinicians documented participants' baseline clinical characteristics and pharmacy dispensing records for 2 years. Between July 2005 and July 2007, 329 participants were enrolled. Average age was 9.7 years for children and 33.5 years for adults; two-thirds had severe haemophilia. The distributions of age, marital status, education level and barriers to haemophilia care were relatively consistent across haemophilic severity categories. Differences were found in participants' employment status, insurance status and income. Overall, children with haemophilia had quality of life scores comparable to healthy counterparts. Adults had significantly lower physical functioning than the general US population. As one of the largest economic studies of haemophilia care, HUGS Va will provide detailed information regarding the burden of illness and health care utilization in the US haemophilia A population. © 2011 Blackwell Publishing Ltd.

Utilizing the Design Charrette for Teaching Sustainability

ERIC Educational Resources Information Center

Walker, Jason B.; Seymour, Michael W.

2008-01-01

Purpose: This paper aims to investigate the design charrette as a method for teaching sustainability. Design/methodology/approach: The paper utilizes a student-based design charrette for the Mississippi Gulf Coast comprising a framework for teaching sustainability. An assessment of the charrette's role in promoting sustainability in higher…

Operator Station Design System - A computer aided design approach to work station layout

NASA Technical Reports Server (NTRS)

Lewis, J. L.

1979-01-01

The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

Utilizing Instructional Media for Teaching Infrastructure Administration

ERIC Educational Resources Information Center

Fajriah, Ulfah Nur; Churiyah, Madziatul

2016-01-01

This study aims to produce instructional media Corel VideoStudio Pro X7-based on teaching infrastructure administration at class XI of APK in SMKN 1 Ngawi, East Java, Indonesia. This study uses Research and Development research design (R & D) through 10 steps, namely: (1) the potential and problems, (2) data collection, (3) the design of the…

Use of Complementary Medicine in Older Americans: Results from the Health and Retirement Study

ERIC Educational Resources Information Center

Ness, Jose; Cirillo, Dominic J.; Weir, David R.; Nisly, Nicole L.; Wallace, Robert B.

2005-01-01

Purpose: The correlates of complementary and alternative medicine (CAM) utilization among elders have not been fully investigated. This study was designed to identify such correlates in a large sample of older adults, thus generating new data relevant to consumer education, medical training, and health practice and policy. Design and Methods: A…

An Examination of Instructional Interactions between Volunteer-Tutors and Students Who Show Differential Gains in Reading Comprehension

ERIC Educational Resources Information Center

Newcomer, Laurie J.

2010-01-01

It is essential to provide high quality interventions designed to improve struggling readers' reading comprehension while making use of limited resources. This study explored, through an holistic, multiple-case study design, volunteer-student interactions and activities in an after school reading program utilizing minimally-trained volunteers. The…

Designing Cognitively Diagnostic Assessment for Algebraic Content Knowledge and Thinking Skills

ERIC Educational Resources Information Center

Zhang, Zhidong

2018-01-01

This study explored a diagnostic assessment method that emphasized the cognitive process of algebra learning. The study utilized a design and a theory-driven model to examine the content knowledge. Using the theory driven model, the thinking skills of algebra learning was also examined. A Bayesian network model was applied to represent the theory…

Challenging Thoughts, Changing Minds: Preservice Teachers' Reflections on Their Experience Working in an Alternative School Setting

ERIC Educational Resources Information Center

Blevins, Brooke; Moore, Brandon; Dexter Torti, Cameron

2017-01-01

This study was designed to use critical reflective journaling practices to explore the experiences of preservice teachers working in a juvenile justice education program called the Reach Academy. Using a qualitative case study design, the researchers explored how 48 preservice teachers utilized critical reflective journaling to examine their own…

Perception of Teachers and Administrators on the Teaching Methods That Influence the Acquisition of Generic Skills

ERIC Educational Resources Information Center

Audu, R.; Bin Kamin, Yusri; Bin Musta'amal, Aede Hatib; Bin Saud, Muhammad Sukri; Hamid, Mohd. Zolkifli Abd.

2014-01-01

This study is designed to identify the most significant teaching methods that influence the acquisition of generic skills of mechanical engineering trades students at technical college level. Descriptive survey research design was utilized in carrying out the study. One hundred and ninety (190) respondents comprised of mechanical engineering…

Utilization of Smartphones in Science Teaching and Learning in Selected Universities in Ghana

ERIC Educational Resources Information Center

Twum, Rosemary

2017-01-01

This study was designed to examine the use of mobile phone, a widespread technology, and determined how this technology influences science students' learning. The study intended to examine the use of smartphones in science teaching and learning and propose of model in the use of smartphones for teaching and learning. The research design employed…

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

Highly loaded multi-stage fan drive turbine-tandem blade configuration design

NASA Technical Reports Server (NTRS)

Evans, D. C.; Wolfmeyer, G. W.

1972-01-01

The results of the tandem blade configuration design study are reported. The three stage constant-inside-diameter turbine utilizes tandem blading in the stage two and stage three vanes and in the stage three blades. All other bladerows use plain blades. Blading detailed design is discussed, and design data are summarized. Steady-state stresses and vibratory behavior are discussed, and the results of the mechanical design analysis are presented.

Study Designs and Statistical Analyses for Biomarker Research

PubMed Central

Gosho, Masahiko; Nagashima, Kengo; Sato, Yasunori

2012-01-01

Biomarkers are becoming increasingly important for streamlining drug discovery and development. In addition, biomarkers are widely expected to be used as a tool for disease diagnosis, personalized medication, and surrogate endpoints in clinical research. In this paper, we highlight several important aspects related to study design and statistical analysis for clinical research incorporating biomarkers. We describe the typical and current study designs for exploring, detecting, and utilizing biomarkers. Furthermore, we introduce statistical issues such as confounding and multiplicity for statistical tests in biomarker research. PMID:23012528

Defense Infrastructure: Actions Needed to Strengthen Utility Resilience Planning

DTIC Science & Technology

2016-11-01

and design , historical architecture and materials, and overhead; and inflation adjustments. 6We obtained and analyzed records from DOD’s Real...the impacts of those disruptions, and the characteristics of the DOD-owned utility systems, among other things. To inform the design of our survey...managing and operating DOD-owned utility systems. Furthermore, the survey instrument was independently reviewed by a survey design expert within GAO. We

Behavioral Health Services Utilization among Older Adults Identified within a State Abuse Hotline Database

ERIC Educational Resources Information Center

Schonfeld, Lawrence; Larsen, Rebecca G.; Stiles, Paul G.

2006-01-01

Purpose: This study examined the extent to which older adults identified in a statewide abuse hotline registry utilized behavioral health services. This is important as mental health issues have been identified as a high priority for filling gaps in services for victims of mistreatment. Design and Methods: We compared Medicaid and Medicare claims…

Distance Learning as a Viable Staff Development Alternative for Behavioral Healthcare Direct Support Professionals

ERIC Educational Resources Information Center

Gill, James G., Jr.

2011-01-01

This quasi-experiment utilized three groups of direct service staff to explore the effectiveness of three methods of training and an optional survey was offered after the study. The researcher used a counterbalance design. Three courses developed by an independent distance learning company were utilized to provide the learning experience. Each…

Extent of Information and Communication Technology (ICT) Utilization for Students' Learning in Tertiary Institutions in Ondo State, Nigeria

ERIC Educational Resources Information Center

Victor, Akinfolarin Akinwale; Bolanle, Rufai Rukayat

2017-01-01

This study investigated the extent of information and communication technology (ICT) utilization for students' learning in Ondo State tertiary institutions. The research design was descriptive survey. The target population comprises of all students in tertiary institutions of learning in Ondo State. A sample of two hundred (200) undergraduate…

The Resource Utilization of Women Who Use Violence in Intimate Relationships

ERIC Educational Resources Information Center

Swan, Suzanne C.; Sullivan, Tami P.

2009-01-01

Studies have found high rates of help seeking among domestic violence victims. However, little research has investigated the help-seeking patterns of women who use violence (many of whom are also abused). Understanding the resources utilized by women who are violent toward their partners may aid in designing interventions that will reduce the…

The Effects of Using Selected Metacognitive Strategies on ACT Mathematics Sub-Test Scores

ERIC Educational Resources Information Center

LeMay, Jeffrey W.

2016-01-01

This quasi-experimental post-test only control group designed quantitative study examined whether or not members of an experimental group of participants who utilized two metacognitive strategy training regimens experienced a significant increase in their ACT mathematics sub-test scores compared to a group of students who did not utilize either of…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bower, G.

We summarize the current status and future developments of the North American Group's Java-based system for studying physics and detector design issues at a linear collider. The system is built around Java Analysis Studio (JAS) an experiment-independent Java-based utility for data analysis. Although the system is an integrated package running in JAS, many parts of it are also standalone Java utilities.

Sexual Victimization and Health-Risk Behaviors: A Prospective Analysis of College Women

ERIC Educational Resources Information Center

Gidycz, Christine A.; Orchowski, Lindsay M.; King, Carrie R.; Rich, Cindy L.

2008-01-01

The present study utilizes the National College Health Risk Behavior Survey to examine the relationship between health-risk behaviors and sexual victimization among a sample of college women. A prospective design is utilized to examine the relationship between health-risk behaviors as measured at baseline and sexual victimization during a 3-month…

Full long-term design response analysis of a wave energy converter

DOE PAGES

Coe, Ryan G.; Michelen, Carlos; Eckert-Gallup, Aubrey; ...

2017-09-21

Efficient design of wave energy converters requires an accurate understanding of expected loads and responses during the deployment lifetime of a device. A study has been conducted to better understand best-practices for prediction of design responses in a wave energy converter. A case-study was performed in which a simplified wave energy converter was analyzed to predict several important device design responses. The application and performance of a full long-term analysis, in which numerical simulations were used to predict the device response for a large number of distinct sea states, was studied. Environmental characterization and selection of sea states for thismore » analysis at the intended deployment site were performed using principle-components analysis. The full long-term analysis applied here was shown to be stable when implemented with a relatively low number of sea states and convergent with an increasing number of sea states. As the number of sea states utilized in the analysis was increased, predicted response levels did not change appreciably. Furthermore, uncertainty in the response levels was reduced as more sea states were utilized.« less

Full long-term design response analysis of a wave energy converter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coe, Ryan G.; Michelen, Carlos; Eckert-Gallup, Aubrey

Efficient design of wave energy converters requires an accurate understanding of expected loads and responses during the deployment lifetime of a device. A study has been conducted to better understand best-practices for prediction of design responses in a wave energy converter. A case-study was performed in which a simplified wave energy converter was analyzed to predict several important device design responses. The application and performance of a full long-term analysis, in which numerical simulations were used to predict the device response for a large number of distinct sea states, was studied. Environmental characterization and selection of sea states for thismore » analysis at the intended deployment site were performed using principle-components analysis. The full long-term analysis applied here was shown to be stable when implemented with a relatively low number of sea states and convergent with an increasing number of sea states. As the number of sea states utilized in the analysis was increased, predicted response levels did not change appreciably. Furthermore, uncertainty in the response levels was reduced as more sea states were utilized.« less

29 CFR 1910.302 - Electric utilization systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Electric utilization systems. 1910.302 Section 1910.302..., DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.302 Electric utilization systems. Sections 1910.302 through 1910.308 contain design...

29 CFR 1910.302 - Electric utilization systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Electric utilization systems. 1910.302 Section 1910.302..., DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.302 Electric utilization systems. Sections 1910.302 through 1910.308 contain design...

29 CFR 1910.302 - Electric utilization systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Electric utilization systems. 1910.302 Section 1910.302..., DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.302 Electric utilization systems. Sections 1910.302 through 1910.308 contain design...

29 CFR 1910.302 - Electric utilization systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 5 2011-07-01 2011-07-01 false Electric utilization systems. 1910.302 Section 1910.302..., DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.302 Electric utilization systems. Sections 1910.302 through 1910.308 contain design...

29 CFR 1910.302 - Electric utilization systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Electric utilization systems. 1910.302 Section 1910.302..., DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems § 1910.302 Electric utilization systems. Sections 1910.302 through 1910.308 contain design...

A review of materials for spectral design coatings in signature management applications

NASA Astrophysics Data System (ADS)

Andersson, Kent E.; Škerlind, Christina

2014-10-01

The current focus in Swedish policy towards national security and high-end technical systems, together with a rapid development in multispectral sensor technology, adds to the utility of developing advanced materials for spectral design in signature management applications. A literature study was performed probing research databases for advancements. Qualitative text analysis was performed using a six-indicator instrument: spectrally selective reflectance; low gloss; low degree of polarization; low infrared emissivity; non-destructive properties in radar and in general controllability of optical properties. Trends are identified and the most interesting materials and coating designs are presented with relevant performance metrics. They are sorted into categories in the order of increasing complexity: pigments and paints, one-dimensional structures, multidimensional structures (including photonic crystals), and lastly biomimic and metamaterials. The military utility of the coatings is assessed qualitatively. The need for developing a framework for assessing the military utility of incrementally increasing the performance of spectrally selective coatings is identified.

Utilization of structural steel in buildings

PubMed Central

Moynihan, Muiris C.; Allwood, Julian M.

2014-01-01

Over one-quarter of steel produced annually is used in the construction of buildings. Making this steel causes carbon dioxide emissions, which climate change experts recommend be reduced by half in the next 37 years. One option to achieve this is to design and build more efficiently, still delivering the same service from buildings but using less steel to do so. To estimate how much steel could be saved from this option, 23 steel-framed building designs are studied, sourced from leading UK engineering firms. The utilization of each beam is found and buildings are analysed to find patterns. The results for over 10 000 beams show that average utilization is below 50% of their capacity. The primary reason for this low value is ‘rationalization’—providing extra material to reduce labour costs. By designing for minimum material rather than minimum cost, steel use in buildings could be drastically reduced, leading to an equivalent reduction in ‘embodied’ carbon emissions. PMID:25104911

A cluster randomized implementation trial to measure the effectiveness of an intervention package aiming to increase the utilization of skilled birth attendants by women for childbirth: study protocol

PubMed Central

2014-01-01

Background Nepal is on track to achieve MDG 5 but there is a huge sub-national disparity with existing high maternal mortality in western and hilly regions. The national priority is to reduce this disparity to achieve the goal at sub-national level. Evidences from developing countries show that increasing utilization of skilled attendant at birth is an important indicator for reducing maternal death. Further, there is a very low utilization during childbirth in western and hilly regions of Nepal which clearly depicts the barriers in utilization of skilled birth attendants. So, there is a need to overcome the identified barriers to increase the utilization thereby decreasing the maternal mortality. The hypothesis of this study is that through a package of interventions the utilization of skilled birth attendants will be increased and hence improve maternal health in Nepal. Method/Design This study involves a cluster randomized controlled trial involving approximately 5000 pregnant women in 36 clusters. The 18 intervention clusters will receive the following interventions: i) mobilization of family support for pregnant women to reach the health facility, ii) availability of emergency funds for institutional childbirth, iii) availability of transport options to reach a health facility for childbirth, iv) training to health workers on communication skills, v) security provisions for SBAs to reach services 24/24 through community mobilization; 18 control clusters will not receive the intervention package. The final evaluation of the intervention is planned to be completed by October 2014. Primary study output of this study is utilization of SBA services. Secondary study outputs measure the uptake of antenatal care, post natal checkup for mother and baby, availability of transportation for childbirth, operation of emergency fund, improved reception of women at health services, and improved physical security of SBAs. Discussion The intervention package is designed to increase the utilization of skilled birth attendants by overcoming the barriers related to awareness, finance, transport, security etc. If proven effective, the Ministry of Health has committed to scale up the intervention package throughout the country. Trial registration number ISRCTN78892490. PMID:24646123

Utilization of Selected Simulation Games to Foster Improved Attitudes Among 11th Grade Students Engaged in the Study of Social Studies.

ERIC Educational Resources Information Center

Festa, Dominick A.

A project to determine the effectiveness of a program designed to create more positive attitudes among students studying social studies through use of simulation games is described in this dissertation. The purposes of the project were to describe the design and implementation of a plan for such a program and to determine whether simulation games…

Optimal Design of Biomass Utilization System for Rural Area Includes Technical and Economic Dimensions

NASA Astrophysics Data System (ADS)

Morioka, Yasuki; Nakata, Toshihiko

In order to design optimal biomass utilization system for rural area, OMNIBUS (The Optimization Model for Neo-Integrated Biomass Utilization System) has been developed. OMNIBUS can derive the optimal system configuration to meet different objective function, such as current account balance, amount of biomass energy supply, and CO2 emission. Most of biomass resources in a focused region e.g. wood biomass, livestock biomass, and crop residues are considered in the model. Conversion technologies considered are energy utilization technologies e.g. direct combustion and methane fermentation, and material utilization technologies e.g. composting and carbonization. Case study in Miyakojima, Okinawa prefecture, has been carried out for several objective functions and constraint conditions. Considering economics of the utilization system as a priority requirement, composting and combustion heat utilization are mainly chosen in the optimal system configuration. However gasification power plant and methane fermentation are included in optimal solutions, only when both biomass energy utilization and CO2 reduction have been set as higher priorities. External benefit of CO2 reduction has large impacts on the system configuration. Provided marginal external benefit of more than 50,000 JPY/t-C, external benefit becomes greater than the revenue from electricity and compost etc. Considering technological learning in the future, expensive technologies such as gasification power plant and methane fermentation will have economic feasibility as well as market competitiveness.

Vortex Flow Aerodynamics, volume 1

NASA Technical Reports Server (NTRS)

Campbell, J. F. (Editor); Osborn, R. F. (Editor); Foughner, J. T., Jr. (Editor)

1986-01-01

Vortex modeling techniques and experimental studies of research configurations utilizing vortex flows are discussed. Also discussed are vortex flap investigations using generic and airplane research models and vortex flap theoretical analysis and design studies.

Raster graphic helmet-mounted display study

NASA Technical Reports Server (NTRS)

Beamon, William S.; Moran, Susanna I.

1990-01-01

A design of a helmet mounted display system is presented, including a design specification and development plan for the selected design approach. The requirements for the helmet mounted display system and a survey of applicable technologies are presented. Three helmet display concepts are then described which utilize lasers, liquid crystal display's (LCD's), and subminiature cathode ray tubes (CRT's), respectively. The laser approach is further developed in a design specification and a development plan.

A systematic review of utility values for chemotherapy-related adverse events.

PubMed

Shabaruddin, Fatiha H; Chen, Li-Chia; Elliott, Rachel A; Payne, Katherine

2013-04-01

Chemotherapy offers cancer patients the potential benefits of improved mortality and morbidity but may cause detrimental outcomes due to adverse drug events (ADEs), some of which requiring time-consuming, resource-intensive and costly clinical management. To appropriately assess chemotherapy agents in an economic evaluation, ADE-related parameters such as the incidence, (dis)utility and cost of ADEs should be reflected within the model parameters. To date, there has been no systematic summary of the existing literature that quantifies the utilities of ADEs due to healthcare interventions in general and chemotherapy treatments in particular. This review aimed to summarize the current evidence base of reported utility values for chemotherapy-related ADEs. A structured electronic search combining terms for utility, utility valuation methods and generic terms for cancer treatment was conducted in MEDLINE and EMBASE in June 2011. Inclusion criteria were: (1) elicitation of utility values for chemotherapy-related ADEs and (2) primary data. Two reviewers identified studies and extracted data independently. Any disagreements were resolved by a third reviewer. Eighteen studies met the inclusion criteria from the 853 abstracts initially identified, collectively reporting 218 utility values for chemotherapy-related ADEs. All 18 studies used short descriptions (vignettes) to obtain the utility values, with nine studies presenting the vignettes used in the valuation exercises. Of the 218 utility values, 178 were elicited using standard gamble (SG) or time trade-off (TTO) approaches, while 40 were elicited using visual analogue scales (VAS). There were 169 utility values of specific chemotherapy-related ADEs (with the top ten being anaemia [34 values], nausea and/or vomiting [32 values], neuropathy [21 values], neutropenia [12 values], diarrhoea [12 values], stomatitis [10 values], fatigue [8 values], alopecia [7 values], hand-foot syndrome [5 values] and skin reaction [5 values]) and 49 of non-specific chemotherapy-related adverse events. In most cases, it was difficult to directly compare the utility values as various definitions and study-specific vignettes were used for the ADEs of interest. This review was designed to provide an overall description of existing literature reporting utility values for chemotherapy-related ADEs. The findings were not exhaustive and were limited to publications that could be identified using the search strategy employed and those reported in the English language. This review identified wide ranges in the utility values reported for broad categories of specific chemotherapy-related ADEs. There were difficulties in comparing the values directly as various study-specific definitions were used for these ADEs and most studies did not make the vignettes used in the valuation exercises available. It is recommended that a basic minimum requirement be developed for the transparent reporting of study designs eliciting utility values, incorporating key criteria such as reporting how the vignettes were developed and presenting the vignettes used in the valuation tasks as well as valuing and reporting the utility values of the ADE-free base states. It is also recommended, in the future, for studies valuing the utilities of chemotherapy-related ADEs to define the ADEs according to the National Cancer Institute (NCI) definitions for chemotherapy-related ADEs as the use of the same definition across studies would ease the comparison and selection of utility values and make the overall inclusion of adverse events within economic models of chemotherapy agents much more straightforward.

Proof of concept of a novel SMA cage actuator

NASA Astrophysics Data System (ADS)

Deyer, Christopher W.; Brei, Diann E.

2001-06-01

Numerous industrial applications that currently utilize expensive solenoids or slow wax motors are good candidates for smart material actuation. Many of these applications require millimeter-scale displacement and low cost; thereby, eliminating piezoelectric technologies. Fortunately, there is a subset of these applications that can tolerate the slower response of shape memory alloys. This paper details a proof-of-concept study of a novel SMA cage actuator intended for proportional braking in commercial appliances. The chosen actuator architecture consists of a SMA wire cage enclosing a return spring. To develop an understanding of the influences of key design parameters on the actuator response time and displacement amplitude, a half-factorial 25 Design of Experiment (DOE) study was conducted utilizing eight differently configured prototypes. The DOE results guided the selection of the design parameters for the final proof-of-concept actuator. This actuator was built and experimentally characterized for stroke, proportional control and response time.

Magnetic suspension and balance system advanced study, 1989 design

NASA Technical Reports Server (NTRS)

Boom, Roger W.; Eyssa, Y. M.; Abdelsalam, Moustafa K.; Mcintosh, Glen E.

1991-01-01

The objectives are to experimentally confirm several advanced design concepts on the Magnetic Suspension and Balance Systems (MSBS). The advanced design concepts were identified as potential improvements by Madison Magnetics, Inc. (MMI) during 1984 and 1985 studies of an MSBS utilizing 14 external superconductive coils and a superconductive solenoid in an airplane test model suspended in a wind tunnel. This study confirmed several advanced design concepts on magnetic suspension and balance systems. The 1989 MSBS redesign is based on the results of these experiments. Savings of up to 30 percent in supporting magnet ampere meters and 50 percent in energy stored over the 1985 design were achieved.

Economic impact of multi-span, prestressed concrete girder bridges designed as simple span versus continuous span : final report.

DOT National Transportation Integrated Search

2016-10-01

The objective of this study was to determine the economic impact of designing pre-tensioned prestressed concrete beam (PPCB) : bridges utilizing the continuity developed in the bridge deck as opposed to the current Iowa Department of Transportation (...

A decision-making tool for incorporating sustainability measures into pavement design : research project capsule.

DOT National Transportation Integrated Search

2016-10-01

The objective of the proposed study is to conceive and develop a decision-making tool : for evaluating sustainability of pavement designs based on a cradle-to-grave analysis. : This tool will utilize EPDs to enhance the reliability of the assessment ...

Soldier-Machine Interface for the Army Future Combat System: Literature Review, Requirements, and Emerging Design Principles

DTIC Science & Technology

2003-04-01

Development vs . Iterative Design ............................ II-7 3. Getting to Know the User: Designing for Usability, Utility, and Pleasure...III-1 2. Terrain Focus .................................................................................... III-1 3. Display vs . Control...heterogeneous, and it diverged into broad philosophical issues, such as “design as engineering” vs . “design as art” and the utility of controlled

Study on utilization of advanced composites in fuselage structures of large transports

NASA Technical Reports Server (NTRS)

Johnson, R. W.; Thomson, L. W.; Wilson, R. D.

1985-01-01

The potential for utilizing advanced composites in fuselage structures of large transports was assessed. Six fuselage design concepts were selected and evaluated in terms of structural performance, weight, and manufacturing development and costs. Two concepts were selected that merit further consideration for composite fuselage application. These concepts are: (1) a full depth honeycomb design with no stringers, and (2) an I section stringer stiffened laminate skin design. Weight reductions due to applying composites to the fuselages of commercial and military transports were calculated. The benefits of applying composites to a fleet of military transports were determined. Significant technology issues pertinent to composite fuselage structures were identified and evaluated. Program plans for resolving the technology issues were developed.

MIUS community conceptual design study

NASA Technical Reports Server (NTRS)

Fulbright, B. E.

1976-01-01

The feasibility, practicality, and applicability of the modular integrated utility systems (MIUS) concept to a satellite new-community development with a population of approximately 100,000 were analyzed. Two MIUS design options, the 29-MIUS-unit (option 1) and the 8-MIUS-unit (option 2) facilities were considered. Each resulted in considerable resource savings when compared to a conventional utility system. Economic analyses indicated that the total cash outlay and operations and maintenance costs for these two options were considerably less than for a conventional system. Computer analyses performed in support of this study provided corroborative data for the study group. An environmental impact assessment was performed to determine whether the MIUS meets or will meet necessary environmental standards. The MIUS can provide improved efficiency in the conservation of natural resources while not adversely affecting the physical environment.

More Useful, or Not So Bad? Evaluating the Effects of Interventions to Reduce Perceived Cost and Increase Utility Value with College Physics Students

NASA Astrophysics Data System (ADS)

Rosenzweig, Emily Quinn

In the present study I developed and evaluated the effects of two interventions designed to target students' motivation to learn in an introductory college physics course. One intervention was designed to improve students' perceptions of utility value and the other was designed to reduce students' perceptions of cost. Utility value and cost both are central constructs from Eccles and colleagues' expectancy-value theory of motivation (Eccles-Parsons et al., 1983). Students (N = 148) were randomly assigned to receive the cost intervention, the utility value intervention, or one of two control conditions. Compared to a survey control condition, neither intervention impacted overall students' motivation, measured at 3 time points over the semester, or their course outcomes. In moderation analyses, neither intervention impacted any students' perceptions of utility value. However, both interventions impacted some students' perceptions of cost, competence-related beliefs, and course outcomes positively while impacting these variables for other students negatively. The cost intervention benefitted consistently and in different ways students who had low baseline competence-related beliefs, low prior achievement, strong malleable beliefs about intelligence, or who were female. However, the intervention showed consistent undermining effects on motivation and/or achievement for students with strong fixed beliefs about intelligence. The utility value intervention benefitted consistently the course outcomes of students who had low baseline competence-related beliefs, low prior achievement, or who were female. The intervention showed less consistent undermining effects on motivation for students with strong fixed beliefs about intelligence, high baseline competence-related beliefs, or high prior achievement. Prior researchers have shown that utility value interventions improve course outcomes for some students who are at risk for underachievement. The present study extends prior work by showing that utility value interventions benefit similar students in college physics courses. It also demonstrates that a cost intervention is a viable way to impact at-risk students' physics course outcomes. Future researchers should consider carefully moderating variables and how to mitigate potential undermining effects for some students when implementing future expectancy-value-theory-based interventions in college physics courses.

Automatic extraction and visualization of object-oriented software design metrics

NASA Astrophysics Data System (ADS)

Lakshminarayana, Anuradha; Newman, Timothy S.; Li, Wei; Talburt, John

2000-02-01

Software visualization is a graphical representation of software characteristics and behavior. Certain modes of software visualization can be useful in isolating problems and identifying unanticipated behavior. In this paper we present a new approach to aid understanding of object- oriented software through 3D visualization of software metrics that can be extracted from the design phase of software development. The focus of the paper is a metric extraction method and a new collection of glyphs for multi- dimensional metric visualization. Our approach utilize the extensibility interface of a popular CASE tool to access and automatically extract the metrics from Unified Modeling Language class diagrams. Following the extraction of the design metrics, 3D visualization of these metrics are generated for each class in the design, utilizing intuitively meaningful 3D glyphs that are representative of the ensemble of metrics. Extraction and visualization of design metrics can aid software developers in the early study and understanding of design complexity.

A Standardized Rubric for Evaluating Webquest Design: Reliability Analysis of ZUNAL Webquest Design Rubric

ERIC Educational Resources Information Center

Unal, Zafer; Bodur, Yasar; Unal, Aslihan

2012-01-01

Current literature provides many examples of rubrics that are used to evaluate the quality of web-quest designs. However, reliability of these rubrics has not yet been researched. This is the first study to fully characterize and assess the reliability of a webquest evaluation rubric. The ZUNAL rubric was created to utilize the strengths of the…

Nickel-cadmium cells

NASA Technical Reports Server (NTRS)

Rubin, E. J.; Turchan, M. J.

1974-01-01

A high energy density nickel cadmium cell of aerospace quality was designed. The approach used was to utilize manufacturing techniques which produce highly uniform and controlled starting materials in addition to improvements in the overall design. Parameters controlling the production of plaque and both positive and negative plate were studied. Quantities of these materials were produced and prototype cells were assembled to test the proposed design.

Performance-Based Seismic Design of Steel Frames Utilizing Colliding Bodies Algorithm

PubMed Central

Veladi, H.

2014-01-01

A pushover analysis method based on semirigid connection concept is developed and the colliding bodies optimization algorithm is employed to find optimum seismic design of frame structures. Two numerical examples from the literature are studied. The results of the new algorithm are compared to the conventional design methods to show the power or weakness of the algorithm. PMID:25202717

Performance-based seismic design of steel frames utilizing colliding bodies algorithm.

PubMed

Veladi, H

2014-01-01

A pushover analysis method based on semirigid connection concept is developed and the colliding bodies optimization algorithm is employed to find optimum seismic design of frame structures. Two numerical examples from the literature are studied. The results of the new algorithm are compared to the conventional design methods to show the power or weakness of the algorithm.

Energy conservation in coal conversion. Final report, September 15, 1977--September 1, 1978. Selected case studies and conservation methodologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Purcupile, J.C.

The purpose of this study is to apply the methodologies developed in the Energy Conservation in Coal Conversion August, 1977 Progress Report - Contract No. EY77S024196 - to an energy efficient, near-term coal conversion process design, and to develop additional, general techniques for studying energy conservation and utilization in coal conversion processes. The process selected for study was the Ralph M. Parsons Company of Pasadena, California ''Oil/Gas Complex, Conceptual Design/Economic Analysis'' as described in R and D Report No. 114 - Interim Report No. 4, published March, 1977, ERDA Contract No. E(49-18)-1975. Thirteen papers representing possible alternative methods of energymore » conservation or waste heat utilization have been entered individually into EDB and ERA. (LTN)« less

Teach It, Don't Preach It: The Differential Effects of Directly-communicated and Self-generated Utility Value Information.

PubMed

Canning, Elizabeth A; Harackiewicz, Judith M

2015-03-01

Social-psychological interventions in education have used a variety of "self-persuasion" or "saying-is-believing" techniques to encourage students to articulate key intervention messages. These techniques are used in combination with more overt strategies, such as the direct communication of messages in order to promote attitude change. However, these different strategies have rarely been systematically compared, particularly in controlled laboratory settings. We focus on one intervention based in expectancy-value theory designed to promote perceptions of utility value in the classroom and test different intervention techniques to promote interest and performance. Across three laboratory studies, we used a mental math learning paradigm in which we varied whether students wrote about utility value for themselves or received different forms of directly-communicated information about the utility value of a novel mental math technique. In Study 1, we examined the difference between directly-communicated and self-generated utility-value information and found that directly-communicated utility-value information undermined performance and interest for individuals who lacked confidence, but that self-generated utility had positive effects. However, Study 2 suggests that these negative effects of directly-communicated utility value can be ameliorated when participants are also given the chance to generate their own examples of utility value, revealing a synergistic effect of directly-communicated and self-generated utility value. In Study 3, we found that individuals who lacked confidence benefited more when everyday examples of utility value were communicated, rather than career and school examples.

Optimal Design and Damage Tolerance Verification of an Isogrid Structure for Helicopter Application

NASA Technical Reports Server (NTRS)

Baker, Donald J.; Fudge, Jack; Ambur, Damodar R.; Kassapoglou, Christos

2003-01-01

A composite isogrid panel design for application to a rotorcraft fuselage is presented. An optimum panel design for the lower fuselage of the rotorcraft that is subjected to combined in-plane compression and shear loads was generated using a design tool that utilizes a smeared-stiffener theory in conjunction with a genetic algorithm. A design feature was introduced along the edges of the panel that facilitates introduction of loads into the isogrid panel without producing undesirable local bending gradients. A low-cost manufacturing method for the isogrid panel that incorporates these design details is also presented. Axial compression tests were conducted on the undamaged and low-speed impact damaged panels to demonstrate the damage tolerance of this isogrid panel. A combined loading test fixture was designed and utilized that allowed simultaneous application of compression and shear loads to the test specimen. Results from finite element analyses are presented for the isogrid panel designs and these results are compared with experimental results. This study illustrates the isogrid concept to be a viable candidate for application to the helicopter lower fuselage structure.

An Ex-Post Facto Examination of Relationships among the Developmental Designs Professional Development Model/Classroom Management Approach, School Leadership, Climate, Student Achievement, Attendance, and Behavior in High Poverty, Middle Grades Schools

ERIC Educational Resources Information Center

Hough, David L.; Schmitt, Vicki L.

2011-01-01

This study reports finding from an ex post facto causal-comparison study utilizing data from a multifaceted program evaluation of a professional development approach to classroom management known as Development Designs 1 and Developmental Designs 2 (DD1 & D2). Data from this program evaluation indicate that teachers implement a number of classroom…

Conceptual design of thermal energy storage systems for near term electric utility applications. Volume 1: Screening of concepts

NASA Technical Reports Server (NTRS)

Hausz, W.; Berkowitz, B. J.; Hare, R. C.

1978-01-01

Over forty thermal energy storage (TES) concepts gathered from the literature and personal contacts were studied for their suitability for the electric utility application of storing energy off-peak discharge during peak hours. Twelve selections were derived from the concepts for screening; they used as storage media high temperature water (HTW), hot oil, molten salts, and packed beds of solids such as rock. HTW required pressure containment by prestressed cast-iron or concrete vessels, or lined underground cavities. Both steam generation from storage and feedwater heating from storage were studied. Four choices were made for further study during the project. Economic comparison by electric utility standard cost practices, and near-term availability (low technical risk) were principal criteria but suitability for utility use, conservation potential, and environmental hazards were considered.

An Action Research Study Using the Music Model of Academic Motivation to Increase Reading Motivation in a Fourth-Grade Classroom

ERIC Educational Resources Information Center

Williams, Angela W.

2013-01-01

This study involved examination of the processes employed in tailoring fourth-grade reading instruction to increase levels of student motivation. A participatory action research approach was utilized to design and conduct reading instruction that fourth-grade students perceived to be motivating. The reading instructional program was designed using…

Reconsidering the Utility of Case Study Designs for Researching School Reform in a Neo-Scientific Era: Insights from a Multiyear, Mixed-Methods Study

ERIC Educational Resources Information Center

Donmoyer, Robert; Galloway, Fred

2010-01-01

In recent years, policy makers and researchers once again have embraced the traditional idea that quasi-experimental research designs (or reasonable facsimiles) can provide the sort of valid and generalizable knowledge about "what works" that educational researchers had promised--but never really produced--during the previous century. Although…

Errors Made by Elementary Fourth Grade Students When Modelling Word Problems and the Elimination of Those Errors through Scaffolding

ERIC Educational Resources Information Center

Ulu, Mustafa

2017-01-01

This study aims to identify errors made by primary school students when modelling word problems and to eliminate those errors through scaffolding. A 10-question problem-solving achievement test was used in the research. The qualitative and quantitative designs were utilized together. The study group of the quantitative design comprises 248…

Exploring Customization in Higher Education: An Experiment in Leveraging Computer Spreadsheet Technology to Deliver Highly Individualized Online Instruction to Undergraduate Business Students

ERIC Educational Resources Information Center

Kunzler, Jayson S.

2012-01-01

This dissertation describes a research study designed to explore whether customization of online instruction results in improved learning in a college business statistics course. The study involved utilizing computer spreadsheet technology to develop an intelligent tutoring system (ITS) designed to: a) collect and monitor individual real-time…

[Kidney patients: aspects related to compliance with renal treatment].

PubMed

Caraballo Nazario, G L; Lebrón de avilés, C; Dávila Torres, R R; Burgos Calderón, R

2001-12-01

The Objective of this study was identify the aspects related with the adherence of medical treatment recommended to the patients that received hemodialysis in the tertiary public hospital. A non experimental transectional correlation design was utilized in this study. Fifty-three patients constituted the population study. A structure interview was utilized to gathered the data. Descriptive statistics and Chi-square tests were utilized to analysis. The response rate was 91.0%. The 75.0% of patients not compliance with the medical treatment. Significant association between compliance variable and educational level was encountered (p < or = 0.05). This study provides important findings to will develops educative intervention in the Renal Unit, directed to improve the adherence of the patient with medical treatment.

Efficient utilization of red maple lumber in glued-laminated timber beams

Treesearch

J. J. Janowiak; H. B. Manbeck; R. Hernandez; R. C. Moody; P. R. Blankenhorn; P. Labosky

The feasibility of utilizing cant-sawn hardwood lumber, which would not usually be desired for furniture manufacture, was studied for the manufacture of structural glued-laminated (glulam) timber. Two red maple beam combinations were evaluated: (1) a glulam combination designed with E-rated lumber in 25 percent of the outer laminations (top and bottom) and No. 3 grade...

Residual strength and stiffness of lumber from decommissioned chromated copper arsenate-treated southern pine utility poles

Treesearch

Cheng Piao; Leslie Groom

2010-01-01

The reusability of decommissioned treated wood is primarily dependent on the residual strength of the wood after service. Determining the residual strength can provide useful information for structural design and reuse of the decommissioned treated wood. This study evaluated the residual strength of decommissioned chromated copper arsenate–treated utility pole wood....

The Contribution of Reasoning to the Utilization of Feedback from Software When Solving Mathematical Problems

ERIC Educational Resources Information Center

Olsson, Jan

2018-01-01

This study investigates how students' reasoning contributes to their utilization of computer-generated feedback. Sixteen 16-year-old students solved a linear function task designed to present a challenge to them using dynamic software, GeoGebra, for assistance. The data were analysed with respect both to character of reasoning and to the use of…

Controlled trials to improve antibiotic utilization: a systematic review of experience, 1984-2004.

PubMed

Parrino, Thomas A

2005-02-01

To review the effectiveness of interventions designed to improve antibiotic prescribing patterns in clinical practice and to draw inferences about the most practical methods for optimizing antibiotic utilization in hospital and ambulatory settings. A literature search using online databases for the years 1975-2004 identified controlled trials of strategies for improving antibiotic utilization. Due to variation in study settings and design, quantitative meta-analysis was not feasible. Therefore, a qualitative literature review was conducted. Forty-one controlled trials met the search criteria. Interventions consisted of education, peer review and feedback, physician participation, rewards and penalties, administrative methods, and combined approaches. Social marketing directed at patients and prescribers was effective in varying contexts, as was implementation of practice guidelines. Authorization systems with structured order entry, formulary restriction, and mandatory consultation were also effective. Peer review and feedback were more effective when combined with dissemination of relevant information or social marketing than when used alone. Several practices were effective in improving antibiotic utilization: social marketing, practice guidelines, authorization systems, and peer review and feedback. Online systems providing clinical information, structured order entry, and decision support may be the most promising approach. Further studies, including economic analyses, are needed to confirm or refute this hypothesis.

Use of Software Tools in Teaching Relational Database Design.

ERIC Educational Resources Information Center

McIntyre, D. R.; And Others

1995-01-01

Discusses the use of state-of-the-art software tools in teaching a graduate, advanced, relational database design course. Results indicated a positive student response to the prototype of expert systems software and a willingness to utilize this new technology both in their studies and in future work applications. (JKP)

Longitudinal Research with Sexual Assault Survivors: A Methodological Review

ERIC Educational Resources Information Center

Campbell, Rebecca; Sprague, Heather Brown; Cottrill, Sara; Sullivan, Cris M.

2011-01-01

Longitudinal research designs are relatively rare in the academic literature on rape and sexual assault despite their tremendous methodological rigor and scientific utility. In the interest of promoting wider use of such methods, we conducted a methodological review of projects that have used prospective longitudinal designs to study the…

Old Time Apple Cider Makin': An Outdoor Education Unit.

ERIC Educational Resources Information Center

Matthews, Bruce E.; Oakes, David B.

An illustrated, self-contained packet, the resource materials contained in this guide are designed for adaptation to K-8. The resources and ideas presented here are designed to encourage utilization of the outdoors as a learning resource. While intrinsically multidisciplinary, the activities are particularly adaptable to social studies, science,…

Economic impact of multi-span, prestressed concrete girder bridges designed as simple span versus continuous span : tech transfer summary.

DOT National Transportation Integrated Search

2016-10-01

The objective of this study was to determine the economic impact of : designing pre-tensioned prestressed concrete beam (PPCB) bridges : utilizing the continuity developed in the bridge deck as opposed to the : current Iowa Department of Transportati...

Alteration of fasting heat production during fescue toxicosis in Holstein steers

USDA-ARS?s Scientific Manuscript database

This study was designed to examine alteration of fasting heat production (FHP) during fescue toxicosis. Six ruminally cannulated Holstein steers (BW = 348±26kg) were weight matched into pairs and utilized in a two period crossover design experiment. Each period consisted of two segments, one each at...

Experimental Design: Utilizing Microsoft Mathematics in Teaching and Learning Calculus

ERIC Educational Resources Information Center

Oktaviyanthi, Rina; Supriani, Yani

2015-01-01

The experimental design was conducted to investigate the use of Microsoft Mathematics, free software made by Microsoft Corporation, in teaching and learning Calculus. This paper reports results from experimental study details on implementation of Microsoft Mathematics in Calculus, students' achievement and the effects of the use of Microsoft…

CRITICAL MECHANICAL PROPERTIES OF STRUCTURAL LIGHT-WEIGHT CONCRETE AND THE EFFECTS OF THESE PROPERTIES ON THE DESIGN OF THE PAVEMENT STRUCTURE.

DOT National Transportation Integrated Search

1965-01-01

In this study, critical mechanical properties of structural lightweight concrete were determined and utilized in the evaluation of a design of concrete pavements. Also presented are the critical mechanical properties resulting from unrestrained and r...

Experiencing and Regulating Sadness: Physiological and Cognitive Effects

ERIC Educational Resources Information Center

Robinson, Jennifer L.; Demaree, Heath A.

2009-01-01

No prior study has examined the two most prominent response-focused regulation strategies (suppression and exaggeration) using a within-subjects design. Utilizing this design allows for a direct comparison of physiological patterns and cognitive impairment associated with such efforts. One hundred and nine participants were asked to view a series…

DEVELOPMENT, EVALUATION AND APPLICATION OF AN AUTOMATED EVENT PRECIPITATION SAMPLER FOR NETWORK OPERATION

EPA Science Inventory

In 1993, the University of Michigan Air Quality Laboratory (UMAQL) designed a new wet-only precipitation collection system that was utilized in the Lake Michigan Loading Study. The collection system was designed to collect discrete mercury and trace element samples on an event b...

Alteration of fasting heat production during fescue toxicosis in Holstein steers

USDA-ARS?s Scientific Manuscript database

This study was designed to examine alteration of fasting heat production (FHP) during fescue toxicosis. Six ruminally cannulated Holstein steers (BW=348 ±13 kg) were weight-matched into pairs and utilized in a two period crossover design experiment. Each period consisted of two temperature segments,...

CELSS experiment model and design concept of gas recycle system

NASA Technical Reports Server (NTRS)

Nitta, K.; Oguchi, M.; Kanda, S.

1986-01-01

In order to prolong the duration of manned missions around the Earth and to expand the human existing region from the Earth to other planets such as a Lunar Base or a manned Mars flight mission, the controlled ecological life support system (CELSS) becomes an essential factor of the future technology to be developed through utilization of space station. The preliminary system engineering and integration efforts regarding CELSS have been carried out by the Japanese CELSS concept study group for clarifying the feasibility of hardware development for Space station experiments and for getting the time phased mission sets after FY 1992. The results of these studies are briefly summarized and the design and utilization methods of a Gas Recycle System for CELSS experiments are discussed.

Metabolism and Resistance of Fusarium spp. to the Manzamine Alkaloids via a Putative Retro Pictet-Spengler Reaction and Utility of the Rational Design of Antimalarial and Antifungal Agents

PubMed Central

Farr, Lorelei Lucas; Gholipour, Abbas; Wedge, David E.; Hamann, Mark T.

2014-01-01

As a part of our continuing investigation of the manzamine alkaloids we studied the in vitro activity of the β-carboline containing manzamine alkaloids against Fusarium solani, Fusarium oxysporium, and Fusarium proliferatum by employing several bioassay techniques including one-dimensional direct bioautography, dilution, and plate susceptibility, and microtiter broth assays. In addition, we also studied the metabolism of the manzamine alkaloids by Fusarium spp. in order to facilitate the redesign of the compounds to prevent resistance of Fusarium spp. through metabolism. The present research reveals that the manzamine alkaloids are inactive against Fusarium spp. and the fungi transform manzamines via hydrolysis, reduction, and a retro Pictet-Spengler reaction. This is the first report to demonstrate an enzymatically retro Pictet-Spengler reaction. The results of this study reveal the utility of the rational design of metabolically stable antifungal agents from this class and the development of manzamine alkaloids as antimalarial drugs through the utilization of Fusarium’s metabolic products to reconstruct the molecule. PMID:24553735

An Investigation of GeoBase Mission Data Set Design, Implementation, and Usage Within Air Force Civil Engineer Electrical and Utilities Work Centers

DTIC Science & Technology

2005-03-01

ethnography , grounded theory , phenomenological , case study , and content analysis. As ethnography is based upon a longitudinal study in...a qualitative methodology consisting of a case study strategy is warranted for this research project. Yin (2003) lists five components of research ...systems. Journal of End User Computing, 12(3), 14. Yin, R. K. (2003). Case Study Research : Design and

The Effects of Trait-Factor Theory Based Career Counseling Sessions on the Levels of Career Maturity and Indecision of High School Students

ERIC Educational Resources Information Center

Atli, Abdullah

2016-01-01

The study aimed to research the effect of career counseling sessions based on trait-factor theory on the career maturity and career indecision levels of high school students. "Single group pretest-posttest test design", one of the weaker test designs, was utilized in the study. The study was conducted with 57 students in Malatya city…

Phased array-fed antenna configuration study

NASA Technical Reports Server (NTRS)

Crosswell, W. F.; Ball, D. E.; Taylor, R. C.

1983-01-01

The scope of this contract entails a configuration study for a phased array fed transmit antenna operating in the frequency band of 17.7 to 20.2 GHz. This initial contract provides a basis for understanding the design limitations and advantages of advanced phased array and cluster feeds (both utilizing intergral MMIC modules) illuminating folded reflector optics (both near field and focused types). Design parametric analyses are performed utilizing as constraints the objective secondary performance requirements of the Advanced Communications Technology Satellite (Table 1.0). The output of the study provides design information which serves as a data base for future active phased array fed antenna studies such as detailed designs required to support the development of a ground tested breadboard. In general, this study is significant because it provides the antenna community with an understanding of the basic principles which govern near field phased scanned feed effects on secondary reflector system performance. Although several articles have been written on analysis procedures and results for these systems, the authors of this report have observed phenomenon of near field antenna systems not previously documented. Because the physical justification for the exhibited performance is provided herein, the findings of this study add a new dimension to the available knowledge of the subject matter.

CVO driver fatigue and complex in-vehicle systems

DOT National Transportation Integrated Search

1997-10-01

As one of a series of studies aimed at gathering data to develop human factors design guidelines for Advanced Traveler Information Systems (ATIS) and Commercial Vehicle Operations (CVO), the present study utilized a driving simulator to study CVO dri...

Theory of Collective Intelligence

NASA Technical Reports Server (NTRS)

Wolpert, David H.

2003-01-01

In this chapter an analysis of the behavior of an arbitrary (perhaps massive) collective of computational processes in terms of an associated "world" utility function is presented We concentrate on the situation where each process in the collective can be viewed as though it were striving to maximize its own private utility function. For such situations the central design issue is how to initialize/update the collective's structure, and in particular the private utility functions, so as to induce the overall collective to behave in a way that has large values of the world utility. Traditional "team game" approaches to this problem simply set each private utility function equal to the world utility function. The "Collective Intelligence" (COIN) framework is a semi-formal set of heuristics that recently have been used to construct private utility. functions that in many experiments have resulted in world utility values up to orders of magnitude superior to that ensuing from use of the team game utility. In this paper we introduce a formal mathematics for analyzing and designing collectives. We also use this mathematics to suggest new private utilities that should outperform the COIN heuristics in certain kinds of domains. In accompanying work we use that mathematics to explain previous experimental results concerning the superiority of COIN heuristics. In that accompanying work we also use the mathematics to make numerical predictions, some of which we then test. In this way these two papers establish the study of collectives as a proper science, involving theory, explanation of old experiments, prediction concerning new experiments, and engineering insights.

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 5: Design of the IPAD system. Part 2: System design. Part 3: General purpose utilities, phase 1, task 2

NASA Technical Reports Server (NTRS)

Garrocq, C. A.; Hurley, M. J.

1973-01-01

Viable designs are presented of various elements of the IPAD framework software, data base management system, and required new languages in relation to the capabilities of operating systems software. A thorough evaluation was made of the basic systems functions to be provide by each software element, its requirements defined in the conceptual design, the operating systems features affecting its design, and the engineering/design functions which it was intended to enhance.

Bituminous concrete overlay studies.

DOT National Transportation Integrated Search

1971-01-01

Deflection tests conducted on eight sections of primary highway, both before and after asphaltic concrete resurfacings, were analyzed as a study of the utility of such tests in the design of overlays. The application of tentative traffic and allowabl...

Understanding the context of healthcare utilization: assessing environmental and provider-related variables in the behavioral model of utilization.

PubMed Central

Phillips, K A; Morrison, K R; Andersen, R; Aday, L A

1998-01-01

OBJECTIVE: The behavioral model of utilization, developed by Andersen, Aday, and others, is one of the most frequently used frameworks for analyzing the factors that are associated with patient utilization of healthcare services. However, the use of the model for examining the context within which utilization occurs-the role of the environment and provider-related factors-has been largely neglected. OBJECTIVE: To conduct a systematic review and analysis to determine if studies of medical care utilization that have used the behavioral model during the last 20 years have included environmental and provider-related variables and the methods used to analyze these variables. We discuss barriers to the use of these contextual variables and potential solutions. DATA SOURCES: The Social Science Citation Index and Science Citation Index. We included all articles from 1975-1995 that cited any of three key articles on the behavioral model, that included all articles that were empirical analyses and studies of formal medical care utilization, and articles that specifically stated their use of the behavioral model (n = 139). STUDY DESIGN: Design was a systematic literature review. DATA ANALYSIS: We used a structured review process to code articles on whether they included contextual variables: (1) environmental variables (characteristics of the healthcare delivery system, external environment, and community-level enabling factors); and (2) provider-related variables (patient factors that may be influenced by providers and provider characteristics that interact with patient characteristics to influence utilization). We also examined the methods used in studies that included contextual variables. PRINCIPAL FINDINGS: Forty-five percent of the studies included environmental variables and 51 percent included provider-related variables. Few studies examined specific measures of the healthcare system or provider characteristics or used methods other than simple regression analysis with hierarchical entry of variables. Only 14 percent of studies analyzed the context of healthcare by including both environmental and provider-related variables as well as using relevant methods. CONCLUSIONS: By assessing whether and how contextual variables are used, we are able to highlight the contributions made by studies using these approaches, to identify variables and methods that have been relatively underused, and to suggest solutions to barriers in using contextual variables. PMID:9685123

Dose-finding designs for trials of molecularly targeted agents and immunotherapies

PubMed Central

Chiuzan, Cody; Shtaynberger, Jonathan; Manji, Gulam A.; Duong, Jimmy K.; Schwartz, Gary K.; Ivanova, Anastasia; Lee, Shing M.

2017-01-01

Recently, there has been a surge of early phase trials of molecularly targeted agents (MTAs) and immunotherapies. These new therapies have different toxicity profiles compared to cytotoxic therapies. MTAs can benefit from new trial designs that allow inclusion of low-grade toxicities, late-onset toxicities, addition of an efficacy endpoint, and flexibility in the specification of a target toxicity probability. To study the degree of adoption of these methods, we conducted a Web of Science search of articles published between 2008 and 2014 that describe phase 1 oncology trials. Trials were categorized based on the dose-finding design used and the type of drug studied. Out of 1,712 dose-finding trials that met our criteria, 1,591 (92.9%) utilized a rule-based design, and 92 (5.4%; range 2.3% in 2009 to 9.7% in 2014) utilized a model-based or novel design. Over half of the trials tested an MTA or immunotherapy. Among the MTA and immunotherapy trials, 5.8% used model-based methods, compared to 3.9% and 8.3% of the chemotherapy or radiotherapy trials, respectively. While the percentage of trials using novel dose-finding designs has tripled since 2007, only 7.1% of trials use novel designs. PMID:28166468

Application of fuel cells with heat recovery for integrated utility systems

NASA Technical Reports Server (NTRS)

Shields, V.; King, J. M., Jr.

1975-01-01

This paper presents the results of a study of fuel cell powerplants with heat recovery for use in an integrated utility system. Such a design provides for a low pollution, noise-free, highly efficient integrated utility. Use of the waste heat from the fuel cell powerplant in an integrated utility system for the village center complex of a new community results in a reduction in resource consumption of 42 percent compared to conventional methods. In addition, the system has the potential of operating on fuels produced from waste materials (pyrolysis and digester gases); this would provide further reduction in energy consumption.

Area-Specific Marginal Costing for Electric Utilities: a Case Study of Transmission and Distribution Costs

NASA Astrophysics Data System (ADS)

Orans, Ren

1990-10-01

Existing procedures used to develop marginal costs for electric utilities were not designed for applications in an increasingly competitive market for electric power. The utility's value of receiving power, or the costs of selling power, however, depend on the exact location of the buyer or seller, the magnitude of the power and the period of time over which the power is used. Yet no electric utility in the United States has disaggregate marginal costs that reflect differences in costs due to the time, size or location of the load associated with their power or energy transactions. The existing marginal costing methods used by electric utilities were developed in response to the Public Utilities Regulatory Policy Act (PURPA) in 1978. The "ratemaking standards" (Title 1) established by PURPA were primarily concerned with the appropriate segmentation of total revenues to various classes-of-service, designing time-of-use rating periods, and the promotion of efficient long-term resource planning. By design, the methods were very simple and inexpensive to implement. Now, more than a decade later, the costing issues facing electric utilities are becoming increasingly complex, and the benefits of developing more specific marginal costs will outweigh the costs of developing this information in many cases. This research develops a framework for estimating total marginal costs that vary by the size, timing, and the location of changes in loads within an electric distribution system. To complement the existing work at the Electric Power Research Institute (EPRI) and Pacific Gas and Electric Company (PGandE) on estimating disaggregate generation and transmission capacity costs, this dissertation focuses on the estimation of distribution capacity costs. While the costing procedure is suitable for the estimation of total (generation, transmission and distribution) marginal costs, the empirical work focuses on the geographic disaggregation of marginal costs related to electric utility distribution investment. The study makes use of data from an actual distribution planning area, located within PGandE's service territory, to demonstrate the important characteristics of this new costing approach. The most significant result of this empirical work is that geographic differences in the cost of capacity in distribution systems can be as much as four times larger than the current system average utility estimates. Furthermore, lumpy capital investment patterns can lead to significant cost differences over time.

MSFC Sortie Laboratory Environmental Control System (ECS) phase B design study results

NASA Technical Reports Server (NTRS)

Ignatonis, A. J.; Mitchell, K. L.

1974-01-01

Phase B effort of the Sortie Lab program has concluded. Results of that effort are presented which pertain to the definitions of the environmental control system (ECS). Numerous design studies were performed in Phase B to investigate system feasibility, complexity, weight, and cost. The results and methods employed for these design studies are included. An autonomous Sortie Lab ECS was developed which utilizes a deployed space radiator. Total system weight was projected to be 1814.4 kg including the radiator and fluids. ECS power requirements were estimated at 950 watts.

A utility-based design for randomized comparative trials with ordinal outcomes and prognostic subgroups.

PubMed

Murray, Thomas A; Yuan, Ying; Thall, Peter F; Elizondo, Joan H; Hofstetter, Wayne L

2018-01-22

A design is proposed for randomized comparative trials with ordinal outcomes and prognostic subgroups. The design accounts for patient heterogeneity by allowing possibly different comparative conclusions within subgroups. The comparative testing criterion is based on utilities for the levels of the ordinal outcome and a Bayesian probability model. Designs based on two alternative models that include treatment-subgroup interactions are considered, the proportional odds model and a non-proportional odds model with a hierarchical prior that shrinks toward the proportional odds model. A third design that assumes homogeneity and ignores possible treatment-subgroup interactions also is considered. The three approaches are applied to construct group sequential designs for a trial of nutritional prehabilitation versus standard of care for esophageal cancer patients undergoing chemoradiation and surgery, including both untreated patients and salvage patients whose disease has recurred following previous therapy. A simulation study is presented that compares the three designs, including evaluation of within-subgroup type I and II error probabilities under a variety of scenarios including different combinations of treatment-subgroup interactions. © 2018, The International Biometric Society.

Development of an advanced anaerobic digester design and a kinetic model for biogasification of water hyacinth/sludge blends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Srivastava, V.; Fannin, K.F.; Biljetina, R.

1986-07-01

The Institute of Gas Technology (IGT) conducted a comprehensive laboratory-scale research program to develop and optimize the anaerobic digestion process for producing methane from water hyacinth and sludge blends. This study focused on digester design and operating techniques, which gave improved methane yields and production rates over those observed using conventional digesters. The final digester concept and the operating experience was utilized to design and operate a large-scale experimentla test unit (ETU) at Walt Disney World, Florida. This paper describes the novel digester design, operating techniques, and the results obtained in the laboratory. The paper also discusses a kinetic modelmore » which predicts methane yield, methane production rate, and digester effluent solids as a function of retention time. This model was successfully utilized to predict the performance of the ETU. 15 refs., 6 figs., 6 tabs.« less

Preliminary Structural Sensitivity Study of Hypersonic Inflatable Aerodynamic Decelerator Using Probabilistic Methods

NASA Technical Reports Server (NTRS)

Lyle, Karen H.

2014-01-01

Acceptance of new spacecraft structural architectures and concepts requires validated design methods to minimize the expense involved with technology validation via flighttesting. This paper explores the implementation of probabilistic methods in the sensitivity analysis of the structural response of a Hypersonic Inflatable Aerodynamic Decelerator (HIAD). HIAD architectures are attractive for spacecraft deceleration because they are lightweight, store compactly, and utilize the atmosphere to decelerate a spacecraft during re-entry. However, designers are hesitant to include these inflatable approaches for large payloads or spacecraft because of the lack of flight validation. In the example presented here, the structural parameters of an existing HIAD model have been varied to illustrate the design approach utilizing uncertainty-based methods. Surrogate models have been used to reduce computational expense several orders of magnitude. The suitability of the design is based on assessing variation in the resulting cone angle. The acceptable cone angle variation would rely on the aerodynamic requirements.

Strategies for Time-resolved X-ray Diffraction of Phase Transitions with Laser Compression

NASA Astrophysics Data System (ADS)

Benedetti, Laura Robin; Eggert, J. H.; Bradley, D. K.; Bell, P. M.; Kilkenny, J. D.; Palmer, N.; Petre, R. B.; Rygg, J. R.; Sorce, C.; Collins, G. W.; Boehly, T. R.

2017-10-01

As part of a program to document kinetics of phase transitions under laser-driven dynamic compression, we are designing a platform to make multiple x-ray diffraction measurements during a single laser experiment. Our plans include experimental development at Omega-EP and eventual implementation at NIF. We will present our strategy for designing a robust platform that can effectively document a wide variety of phase transformations by utilizing both streaked and multiple-frame imaging detectors. Preliminary designs utilize a novel CMOS detector designed by Sandia National Lab. Our initial experiments include scoping studies that will focus on photometrics and shielding requirements in the high EMP environment close to the target. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. Lawrence Livermore National Security, LLC, LLNL-ABS-734470.

American Recovery and Reinvestment Act of 2009. Interim Report on Customer Acceptance, Retention, and Response to Time-Based Rates from the Consumer Behavior Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappers, Peter; Hans, Liesel; Scheer, Richard

Time-based rate programs1, enabled by utility investments in advanced metering infrastructure (AMI), are increasingly being considered by utilities as tools to reduce peak demand and enable customers to better manage consumption and costs. There are several customer systems that are relatively new to the marketplace and have the potential for improving the effectiveness of these programs, including in-home displays (IHDs), programmable communicating thermostats (PCTs), and web portals. Policy and decision makers are interested in more information about customer acceptance, retention, and response before moving forward with expanded deployments of AMI-enabled new rates and technologies. Under the Smart Grid Investment Grantmore » Program (SGIG), the U.S. Department of Energy (DOE) partnered with several utilities to conduct consumer behavior studies (CBS). The goals involved applying randomized and controlled experimental designs for estimating customer responses more precisely and credibly to advance understanding of time-based rates and customer systems, and provide new information for improving program designs, implementation strategies, and evaluations. The intent was to produce more robust and credible analysis of impacts, costs, benefits, and lessons learned and assist utility and regulatory decision makers in evaluating investment opportunities involving time-based rates. To help achieve these goals, DOE developed technical guidelines to help the CBS utilities estimate customer acceptance, retention, and response more precisely.« less

Formulation Optimization of Hot Melt Extruded Abuse Deterrent Pellet Dosage Form Utilizing Design of Experiments (DOE)

PubMed Central

Maddineni, Sindhuri; Battu, Sunil Kumar; Morott, Joe; Majumdar, Soumyajit; Repka, Michael A.

2014-01-01

The objective of the present study was to develop techniques for an abuse-deterrent (AD) platform utilizing hot melt extrusion (HME) process. Formulation optimization was accomplished by utilizing Box-Behnken design of experiments to determine the effect of the three formulation factors: PolyOx™ WSR301, Benecel™ K15M, and Carbopol 71G; each of which was studied at three levels on TR attributes of the produced melt extruded pellets. A response surface methodology was utilized to identify the optimized formulation. Lidocaine Hydrochloride was used as a model drug, and suitable formulation ingredients were employed as carrier matrices and processing aids. All of the formulations were evaluated for the TR attributes such as particle size post-milling, gelling, percentage of drug extraction in water and alcohol. All of the DOE formulations demonstrated sufficient hardness and elasticity, and could not be reduced into fine particles (<150µm), which is a desirable feature to prevent snorting. In addition, all of the formulations exhibited good gelling tendency in water with minimal extraction of drug in the aqueous medium. Moreover, Benecel™ K15M in combination with PolyOx™ WSR301 could be utilized to produce pellets with TR potential. HME has been demonstrated to be a viable technique with a potential to develop novel abuse-deterrent formulations. PMID:24433429

Nutritive utilization of protein and digestive utilization of fat in two commercial diets designed for clinical enteral nutrition.

PubMed

Alférez, M J; Campos, M S; Barrionuevo, M; López-Aliaga, I

1990-01-01

The digestive and metabolic utilization of protein (50% lactoalbumin + 50% casein) and fat (43.0% butter, 29.5% olive oil, 14.7% soy oil, 9.8% MCT and 3.0% lecithin) provided by two commercial diets used in clinical enteral nutrition (normoproteic, 16.1% protein and 20.8% fat, and hyperproteic, 23.1% protein and 14.9% fat), was studied in adult rats (mean body weight 180 g). The diet containing the greater amount of protein improved the digestive utilization of nitrogen, and although nitrogen retention was optimal, it failed to rise further when the dietary protein supply was increased. The digestive utilization of fat in both diets was excellent.

The Technological Impact of the E-Rate Program on a School District of the Texas Coastal Bend Region

ERIC Educational Resources Information Center

Vazquez-Cruz, Juan Diego

2012-01-01

The purpose of the study was to examine the impact of the E-Rate program on students, teachers, administrators, and the technology environment of a public school district in the Texas Gulf Coast Region. The study was conducted through a mixed methods design, utilizing both quantitative and qualitative data collection; the research design was a…

Utility of functional MRI in pediatric neurology.

PubMed

Freilich, Emily R; Gaillard, William D

2010-01-01

Functional MRI (fMRI), a tool increasingly used to study cognitive function, is also an important tool for understanding not only normal development in healthy children, but also abnormal development, as seen in children with epilepsy, attention-deficit/hyperactivity disorder, and autism. Since its inception almost 15 years ago, fMRI has seen an explosion in its use and applications in the adult literature. However, only recently has it found a home in pediatric neurology. New adaptations in study design and technologic advances, especially the study of resting state functional connectivity as well as the use of passive task design in sedated children, have increased the utility of functional imaging in pediatrics to help us gain understanding into the developing brain at work. This article reviews the background of fMRI in pediatrics and highlights the most recent literature and clinical applications.

12 CFR 234.3 - Standards for payment systems.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SYSTEM (CONTINUED) DESIGNATED FINANCIAL MARKET UTILITIES (REGULATION HH) § 234.3 Standards for payment systems. (a) A designated financial market utility that is designated on the basis of its role as the... arrangements for timely completion of daily processing. (8) The payment system provides a means of making...

12 CFR 234.3 - Standards for payment systems.

Code of Federal Regulations, 2013 CFR

2013-01-01

... SYSTEM (CONTINUED) DESIGNATED FINANCIAL MARKET UTILITIES (REGULATION HH) § 234.3 Standards for payment systems. (a) A designated financial market utility that is designated on the basis of its role as the... arrangements for timely completion of daily processing. (8) The payment system provides a means of making...

Key data elements for use in cost-utility modeling of biological treatments for rheumatoid arthritis.

PubMed

Ganz, Michael L; Hansen, Brian Bekker; Valencia, Xavier; Strandberg-Larsen, Martin

2015-05-01

Economic evaluation is becoming more common and important as new biologic therapies for rheumatoid arthritis (RA) are developed. While much has been published about how to design cost-utility models for RA to conduct these evaluations, less has been written about the sources of data populating those models. The goal is to review the literature and to provide recommendations for future data collection efforts. This study reviewed RA cost-utility models published between January 2006 and February 2014 focusing on five key sources of data (health-related quality-of-life and utility, clinical outcomes, disease progression, course of treatment, and healthcare resource use and costs). It provided recommendations for collecting the appropriate data during clinical and other studies to support modeling of biologic treatments for RA. Twenty-four publications met the selection criteria. Almost all used two steps to convert clinical outcomes data to utilities rather than more direct methods; most did not use clinical outcomes measures that captured absolute levels of disease activity and physical functioning; one-third of them, in contrast with clinical reality, assumed zero disease progression for biologic-treated patients; little more than half evaluated courses of treatment reflecting guideline-based or actual clinical care; and healthcare resource use and cost data were often incomplete. Based on these findings, it is recommended that future studies collect clinical outcomes and health-related quality-of-life data using appropriate instruments that can convert directly to utilities; collect data on actual disease progression; be designed to capture real-world courses of treatment; and collect detailed data on a wide range of healthcare resources and costs.

Can cost utility evaluations inform decision making about interventions for low back pain?

PubMed

Dagenais, Simon; Roffey, Darren M; Wai, Eugene K; Haldeman, Scott; Caro, Jaime

2009-11-01

Low back pain (LBP) is associated with high health-care utilization and lost productivity. Numerous interventions are routinely used, although few are supported by strong evidence. Cost utility analyses (CUAs) may be helpful to inform decision makers. To conduct a systematic review of CUAs of interventions for LBP. Systematic review. A search strategy combining medical subject headings and free text related to LBP and health economic evaluations was executed in MEDLINE. Cost utility analyses combined with randomized controlled trials for LBP were included. Studies that were published before 1998, non-English, decision analyses, and duplicate reports were excluded. Search results were evaluated by two reviewers, who extracted data independently related to clinical study design, economic study design, direct cost components, utility results, cost results, and CUA results. The search produced 319 citations, and of these 15 met eligibility criteria. Most were from the United Kingdom (n=8), published in the past 3 years (n=12), studied chronic LBP or radiculopathy (n=13), and had a follow-up >12 months (n=13). Combined, there were 33 study groups who received a mean 2.1 interventions, most commonly education (n=17), exercise therapy (n=13), spinal manipulation therapy (n=7), surgery (n=7), and usual care from a general practitioner (n=7). Mean baseline utility was 0.57, improving to 0.67 at follow-up; the mean difference in utility improvement between study groups was 0.04. Based on available data and converted to US dollars, the cost per quality-adjusted life year ranged from $304 to 579,527 dollars, with a median of 13,015 dollars. Few CUAs were identified for LBP, and there was heterogeneity in the interventions compared, direct cost components measured, indirect costs, other methods, and results. Reporting quality was mixed. Currently published CUAs do not provide sufficient information to assist decision makers. Future CUAs should attempt to measure all known direct cost components relevant to LBP, estimate indirect costs such as lost productivity, have a follow-up period sufficient to capture meaningful changes, and clearly report methods and results to facilitate interpretation and comparison.

Impact of Publicly Financed Health Insurance Schemes on Healthcare Utilization and Financial Risk Protection in India: A Systematic Review.

PubMed

Prinja, Shankar; Chauhan, Akashdeep Singh; Karan, Anup; Kaur, Gunjeet; Kumar, Rajesh

2017-01-01

Several publicly financed health insurance schemes have been launched in India with the aim of providing universalizing health coverage (UHC). In this paper, we report the impact of publicly financed health insurance schemes on health service utilization, out-of-pocket (OOP) expenditure, financial risk protection and health status. Empirical research studies focussing on the impact or evaluation of publicly financed health insurance schemes in India were searched on PubMed, Google scholar, Ovid, Scopus, Embase and relevant websites. The studies were selected based on two stage screening PRISMA guidelines in which two researchers independently assessed the suitability and quality of the studies. The studies included in the review were divided into two groups i.e., with and without a comparison group. To assess the impact on utilization, OOP expenditure and health indicators, only the studies with a comparison group were reviewed. Out of 1265 articles screened after initial search, 43 studies were found eligible and reviewed in full text, finally yielding 14 studies which had a comparator group in their evaluation design. All the studies (n-7) focussing on utilization showed a positive effect in terms of increase in the consumption of health services with introduction of health insurance. About 70% studies (n-5) studies with a strong design and assessing financial risk protection showed no impact in reduction of OOP expenditures, while remaining 30% of evaluations (n-2), which particularly evaluated state sponsored health insurance schemes, reported a decline in OOP expenditure among the enrolled households. One study which evaluated impact on health outcome showed reduction in mortality among enrolled as compared to non-enrolled households, from conditions covered by the insurance scheme. While utilization of healthcare did improve among those enrolled in the scheme, there is no clear evidence yet to suggest that these have resulted in reduced OOP expenditures or higher financial risk protection.

Impact of Publicly Financed Health Insurance Schemes on Healthcare Utilization and Financial Risk Protection in India: A Systematic Review

PubMed Central

Chauhan, Akashdeep Singh; Karan, Anup; Kaur, Gunjeet; Kumar, Rajesh

2017-01-01

Several publicly financed health insurance schemes have been launched in India with the aim of providing universalizing health coverage (UHC). In this paper, we report the impact of publicly financed health insurance schemes on health service utilization, out-of-pocket (OOP) expenditure, financial risk protection and health status. Empirical research studies focussing on the impact or evaluation of publicly financed health insurance schemes in India were searched on PubMed, Google scholar, Ovid, Scopus, Embase and relevant websites. The studies were selected based on two stage screening PRISMA guidelines in which two researchers independently assessed the suitability and quality of the studies. The studies included in the review were divided into two groups i.e., with and without a comparison group. To assess the impact on utilization, OOP expenditure and health indicators, only the studies with a comparison group were reviewed. Out of 1265 articles screened after initial search, 43 studies were found eligible and reviewed in full text, finally yielding 14 studies which had a comparator group in their evaluation design. All the studies (n-7) focussing on utilization showed a positive effect in terms of increase in the consumption of health services with introduction of health insurance. About 70% studies (n-5) studies with a strong design and assessing financial risk protection showed no impact in reduction of OOP expenditures, while remaining 30% of evaluations (n-2), which particularly evaluated state sponsored health insurance schemes, reported a decline in OOP expenditure among the enrolled households. One study which evaluated impact on health outcome showed reduction in mortality among enrolled as compared to non-enrolled households, from conditions covered by the insurance scheme. While utilization of healthcare did improve among those enrolled in the scheme, there is no clear evidence yet to suggest that these have resulted in reduced OOP expenditures or higher financial risk protection. PMID:28151946

INTRODUCTION AND STUDY DESIGN

EPA Science Inventory

Under the sponsorship of the UNEP/ILO/IPCS, 17 laboratories from diverse regions of the world participated in evaluating the utility of four plant bioassays for detecting genetic hazards of environmental chemicals. he bioassays included in this collaborative study were Arabidopsi...

Boosting workplace stair utilization: a study of incremental reinforcement.

PubMed

Schumacher, Joseph E; Utley, Janice; Sutton, Lindsay; Horton, Trudi; Hamer, Trey; You, Zhiying; Klapow, Joshua C

2013-02-01

This study was designed to determine whether engagement in stair taking can be increased in a worksite setting through the provision of an employer-sponsored, behavior-based incentive system in which employees (members) accumulate points that can be redeemed for merchandise. ChipRewards implemented stair utilization in one employer as a part of a larger health incentive engagement program. Using an AB (baseline-intervention) design, members (N = 216) were observed for 6 months (6.17.10 to 12.14.10 or 129 weekdays after excluding 52 weekend days) before the intervention (baseline) and after 6 months (1.1.11 to 6.30.11 with the same number of weekdays) of implementation. Members were 84% female, 51% Caucasian, 48% African American, 3% Hispanic, and 45 years average age. The number of total stair transactions for all members for all days monitored increased from 5,070 to 38,900, and the average number of stair transactions per day rose from 39 to 301, representing over a 600% increase. The overall cost of incentives for stair utilization was $3,739.30 or $17.55 per member on average. This study supports that stair usage in the workplace is a viable way to increase physical activity. This study adds to existing research that attempted to increase stair utilization through promotion only by adding a behavioral reinforcement strategy. Finally, this study demonstrates that a physical activity among employees at the worksite can be increased with minimal relative cost.

Toward an electrical power utility for space exploration

NASA Technical Reports Server (NTRS)

Bercaw, Robert W.

1989-01-01

Future electrical power requirements for space exploration are discussed. Megawatts of power with enough reliability for multi-year missions and with enough flexibility to adapt to needs unanticipated at design time are some of the criteria which space power systems must be able to meet. The reasons for considering the power management and distribution in the various systems, from a total mission perspective rather than simply extrapolating current spacecraft design practice, are discussed. A utility approach to electric power integrating requirements from a broad selection of current development programs, with studies in which both space and terrestrial technologies are conceptually applied to exploration mission scenarios, is described.

Designing shear-thinning

NASA Astrophysics Data System (ADS)

Nelson, Arif Z.; Ewoldt, Randy H.

2017-11-01

Design in fluid mechanics often focuses on optimizing geometry (airfoils, surface textures, microfluid channels), but here we focus on designing fluids themselves. The dramatically shear-thinning ``yield-stress fluid'' is currently the most utilized non-Newtonian fluid phenomenon. These rheologically complex materials, which undergo a reversible transition from solid-like to liquid-like fluid flow, are utilized in pedestrian products such as paint and toothpaste, but also in emerging applications like direct-write 3D printing. We present a paradigm for yield-stress fluid design that considers constitutive model representation, material property databases, available predictive scaling laws, and the many ways to achieve a yield stress fluid, flipping the typical structure-to-rheology analysis to become the inverse: rheology-to-structure with multiple possible materials as solutions. We describe case studies of 3D printing inks and other flow scenarios where designed shear-thinning enables performance remarkably beyond that of Newtonian fluids. This work was supported by Wm. Wrigley Jr. Company and the National Science Foundation under Grant No. CMMI-1463203.

Teach It, Don’t Preach It: The Differential Effects of Directly-communicated and Self-generated Utility Value Information

PubMed Central

Canning, Elizabeth A.; Harackiewicz, Judith M.

2015-01-01

Social-psychological interventions in education have used a variety of “self-persuasion” or “saying-is-believing” techniques to encourage students to articulate key intervention messages. These techniques are used in combination with more overt strategies, such as the direct communication of messages in order to promote attitude change. However, these different strategies have rarely been systematically compared, particularly in controlled laboratory settings. We focus on one intervention based in expectancy-value theory designed to promote perceptions of utility value in the classroom and test different intervention techniques to promote interest and performance. Across three laboratory studies, we used a mental math learning paradigm in which we varied whether students wrote about utility value for themselves or received different forms of directly-communicated information about the utility value of a novel mental math technique. In Study 1, we examined the difference between directly-communicated and self-generated utility-value information and found that directly-communicated utility-value information undermined performance and interest for individuals who lacked confidence, but that self-generated utility had positive effects. However, Study 2 suggests that these negative effects of directly-communicated utility value can be ameliorated when participants are also given the chance to generate their own examples of utility value, revealing a synergistic effect of directly-communicated and self-generated utility value. In Study 3, we found that individuals who lacked confidence benefited more when everyday examples of utility value were communicated, rather than career and school examples. PMID:26495326

Multi-Attribute Tradespace Exploration in Space System Design

NASA Astrophysics Data System (ADS)

Ross, A. M.; Hastings, D. E.

2002-01-01

The complexity inherent in space systems necessarily requires intense expenditures of resources both human and monetary. The high level of ambiguity present in the early design phases of these systems causes long, highly iterative, and costly design cycles. This paper looks at incorporating decision theory methods into the early design processes to streamline communication of wants and needs among stakeholders and between levels of design. Communication channeled through formal utility interviews and analysis enables engineers to better understand the key drivers for the system and allows a more thorough exploration of the design tradespace. Multi-Attribute Tradespace Exploration (MATE), an evolving process incorporating decision theory into model and simulation- based design, has been applied to several space system case studies at MIT. Preliminary results indicate that this process can improve the quality of communication to more quickly resolve project ambiguity, and enable the engineer to discover better value designs for multiple stakeholders. MATE is also being integrated into a concurrent design environment to facilitate the transfer knowledge of important drivers into higher fidelity design phases. Formal utility theory provides a mechanism to bridge the language barrier between experts of different backgrounds and differing needs (e.g. scientists, engineers, managers, etc). MATE with concurrent design couples decision makers more closely to the design, and most importantly, maintains their presence between formal reviews.

Applications of microcomputers in bridge design.

DOT National Transportation Integrated Search

1986-01-01

The utilization of microcomputers in bridge design activities in state transportation departments was evaluated through contacts with 32 state agencies. While the present utilization of microcomputers was found to be limited, subsequent research show...

Interdisciplinary Concepts for Design and Implementation of Mixed Reality Interactive Neurorehabilitation Systems for Stroke

PubMed Central

Lehrer, Nicole; Duff, Margaret; Venkataraman, Vinay; Turaga, Pavan; Ingalls, Todd; Rymer, W. Zev; Wolf, Steven L.; Rikakis, Thanassis

2015-01-01

Interactive neurorehabilitation (INR) systems provide therapy that can evaluate and deliver feedback on a patient's movement computationally. There are currently many approaches to INR design and implementation, without a clear indication of which methods to utilize best. This article presents key interactive computing, motor learning, and media arts concepts utilized by an interdisciplinary group to develop adaptive, mixed reality INR systems for upper extremity therapy of patients with stroke. Two INR systems are used as examples to show how the concepts can be applied within: (1) a small-scale INR clinical study that achieved integrated improvement of movement quality and functionality through continuously supervised therapy and (2) a pilot study that achieved improvement of clinical scores with minimal supervision. The notion is proposed that some of the successful approaches developed and tested within these systems can form the basis of a scalable design methodology for other INR systems. A coherent approach to INR design is needed to facilitate the use of the systems by physical therapists, increase the number of successful INR studies, and generate rich clinical data that can inform the development of best practices for use of INR in physical therapy. PMID:25425694

Interdisciplinary concepts for design and implementation of mixed reality interactive neurorehabilitation systems for stroke.

PubMed

Baran, Michael; Lehrer, Nicole; Duff, Margaret; Venkataraman, Vinay; Turaga, Pavan; Ingalls, Todd; Rymer, W Zev; Wolf, Steven L; Rikakis, Thanassis

2015-03-01

Interactive neurorehabilitation (INR) systems provide therapy that can evaluate and deliver feedback on a patient's movement computationally. There are currently many approaches to INR design and implementation, without a clear indication of which methods to utilize best. This article presents key interactive computing, motor learning, and media arts concepts utilized by an interdisciplinary group to develop adaptive, mixed reality INR systems for upper extremity therapy of patients with stroke. Two INR systems are used as examples to show how the concepts can be applied within: (1) a small-scale INR clinical study that achieved integrated improvement of movement quality and functionality through continuously supervised therapy and (2) a pilot study that achieved improvement of clinical scores with minimal supervision. The notion is proposed that some of the successful approaches developed and tested within these systems can form the basis of a scalable design methodology for other INR systems. A coherent approach to INR design is needed to facilitate the use of the systems by physical therapists, increase the number of successful INR studies, and generate rich clinical data that can inform the development of best practices for use of INR in physical therapy. © 2015 American Physical Therapy Association.

Preliminary Design Study of Medium Sized Gas Cooled Fast Reactor with Natural Uranium as Fuel Cycle Input

NASA Astrophysics Data System (ADS)

Meriyanti, Su'ud, Zaki; Rijal, K.; Zuhair, Ferhat, A.; Sekimoto, H.

2010-06-01

In this study a fesibility design study of medium sized (1000 MWt) gas cooled fast reactors which can utilize natural uranium as fuel cycle input has been conducted. Gas Cooled Fast Reactor (GFR) is among six types of Generation IV Nuclear Power Plants. GFR with its hard neuron spectrum is superior for closed fuel cycle, and its ability to be operated in high temperature (850° C) makes various options of utilizations become possible. To obtain the capability of consuming natural uranium as fuel cycle input, modified CANDLE burn-up scheme[1-6] is adopted this GFR system by dividing the core into 10 parts of equal volume axially. Due to the limitation of thermal hydraulic aspects, the average power density of the proposed design is selected about 70 W/cc. As an optimization results, a design of 1000 MWt reactors which can be operated 10 years without refueling and fuel shuffling and just need natural uranium as fuel cycle input is discussed. The average discharge burn-up is about 280 GWd/ton HM. Enough margin for criticallity was obtained for this reactor.

An Adaptive Scaffolding E-Learning System for Middle School Students' Physics Learning

ERIC Educational Resources Information Center

Chen, Ching-Huei

2014-01-01

This study presents a framework that utilizes cognitive and motivational aspects of learning to design an adaptive scaffolding e-learning system. It addresses scaffolding processes and conditions for designing adaptive scaffolds. The features and effectiveness of this adaptive scaffolding e-learning system are discussed and evaluated. An…

Reciprocity in Online Markets: Empirical Studies of Auction and Barter Markets

ERIC Educational Resources Information Center

Ye, Shun

2013-01-01

My dissertation seeks to understand how reciprocity affects transaction outcomes and mechanism design in online markets. The first essay examines negative reciprocity illustrated as feedback-revoking behavior in the eBay auction market, focusing on its impact and implications for reputation system design. I utilize the biggest policy change of…

Facilitating Real-Time Observation of, and Peer Discussion and Feedback about, Practice in Writing Classrooms

ERIC Educational Resources Information Center

Parr, Judy M.; Hawe, Eleanor

2017-01-01

This study investigates conditions designed to optimize learning where professionals utilize the expertise and support of one another. It describes a research--practice collaboration to enhance teacher knowledge and practice through peer observation of, and feedback about, classroom practice in writing. A collaboratively designed observation…

Mathematical Practices in a Technological Setting: A Design Research Experiment for Teaching Circle Properties

ERIC Educational Resources Information Center

Akyuz, Didem

2016-01-01

This article documents the classroom mathematical practices observed in a collegiate level teacher education course related to the circle topic. The course, which was prepared as design research, utilized a dynamic geometry environment which influenced the type and nature of the evolved mathematical practices. The study uses emergent perspective…

Superintendents as Sensemakers in the Design of Sustainable Schools

ERIC Educational Resources Information Center

Klocko, Barbara A.

2009-01-01

The impact of the superintendent in the design decision-making process of sustainable school buildings was examined in this study to determine whether superintendents who have more knowledge and commitment to sustainability have a greater influence on green building practices within their school districts than those who do not. Utilizing a…

Development of a fescue toxicosis model using a fescue seed extract

USDA-ARS?s Scientific Manuscript database

This study was designed to examine the efficacy of a fescue seed extract for inducing fescue toxicosis in cattle. Four growing Holstein steers (BW = 309±36kg) surgically fitted with ruminal cannulas were utilized in a four phase crossover design experiment. The basal diet consisted of endophyte fr...

Removing a Nail from the Boot Camp Coffin: An Outcome Evaluation of Minnesota's Challenge Incarceration Program

ERIC Educational Resources Information Center

Duwe, Grant; Kerschner, Deborah

2008-01-01

Using a retrospective, quasiexperimental design, this study evaluates Minnesota's Challenge Incarceration Program (CIP), examining whether it has lowered recidivism and saved money. In addition to utilizing a lengthy follow-up period and multiple measures of recidivism and participation, a multistage sampling design was employed to create a…

Contrasting the Use of Tools for Presentation and Critique: Some Cases from Architectural Education

ERIC Educational Resources Information Center

Lymer, Gustav; Ivarsson, Jonas; Lindwall, Oskar

2009-01-01

This study investigates video recordings of design reviews in architectural education, focusing on how presentations and discussions of designs are contingent on the specific tools employed. In the analyzed recordings, three different setups are utilized: traditional posters, digital slide-show technologies, and combinations of the two. This range…

Comparing the Effects of Home versus Clinic-Based Parent Training for Children with Autism

ERIC Educational Resources Information Center

Crone, Regina M.

2010-01-01

Research with parents on managing child problem behavior typically measures either child or parent behavior. This study was designed to evaluate the effectiveness of training parents to implement a function-based behavior intervention plan (BIP) in a non-trained natural environment utilizing a Multiple Probe Design across Participants.…

A Systematic Review of Training Programs for Parents of Children with Autism Spectrum Disorders: Single Subject Contributions

ERIC Educational Resources Information Center

Patterson, Stephanie Y.; Smith, Veronica; Mirenda, Pat

2012-01-01

Aim: The purpose of this systematic review was to examine research utilizing single subject research designs (SSRD) to explore the effectiveness of interventions designed to increase parents' ability to support communication and social development in children with autism spectrum disorders (ASDs). Method: Included studies were systematically…

Implementation of "Quality by Design (QbD)" Approach for the Development of 5-Fluorouracil Loaded Thermosensitive Hydrogel.

PubMed

Dalwadi, Chintan; Patel, Gayatri

2016-01-01

The purpose of this study was to investigate Quality by Design (QbD) principle for the preparation of hydrogel products to prove both practicability and utility of executing QbD concept to hydrogel based controlled release systems. Product and process understanding will help in decreasing the variability of critical material and process parameters, which give quality product output and reduce the risk. This study includes the identification of the Quality Target Product Profiles (QTPPs) and Critical Quality Attributes (CQAs) from literature or preliminary studies. To identify and control the variability in process and material attributes, two tools of QbD was utilized, Quality Risk Management (QRM) and Experimental Design. Further, it helps to identify the effect of these attributes on CQAs. Potential risk factors were identified from fishbone diagram and screened by risk assessment and optimized by 3-level 2- factor experimental design with center points in triplicate, to analyze the precision of the target process. This optimized formulation was further characterized by gelling time, gelling temperature, rheological parameters, in-vitro biodegradation and in-vitro drug release. Design space was created using experimental design tool that gives the control space and working within this controlled space reduces all the failure modes below the risk level. In conclusion, QbD approach with QRM tool provides potent and effectual pyramid to enhance the quality into the hydrogel.

Metabolic analysis of adaptive evolution for in silico-designed lactate-producing strains.

PubMed

Hua, Qiang; Joyce, Andrew R; Fong, Stephen S; Palsson, Bernhard Ø

2006-12-05

Experimental evolution is now frequently applied to many biological systems to achieve desired objectives. To obtain optimized performance for metabolite production, a successful strategy has been recently developed that couples metabolic engineering techniques with laboratory evolution of microorganisms. Previously, we reported the growth characteristics of three lactate-producing, adaptively evolved Escherichia coli mutant strains designed by the OptKnock computational algorithm. Here, we describe the use of (13)C-labeled experiments and mass distribution measurements to study the evolutionary effects on the fluxome of these differently designed strains. Metabolic flux ratios and intracellular flux distributions as well as physiological data were used to elucidate metabolic responses over the course of adaptive evolution and metabolic differences among strains. The study of 3 unevolved and 12 evolved engineered strains as well as a wild-type strain suggests that evolution resulted in remarkable improvements in both substrate utilization rate and the proportion of glycolytic flux to total glucose utilization flux. Among three strain designs, the most significant increases in the fraction of glucose catabolized through glycolysis (>50%) and the glycolytic fluxes (>twofold) were observed in phosphotransacetylase and phosphofructokinase 1 (PFK1) double deletion (pta- pfkA) strains, which were likely attributed to the dramatic evolutionary increase in gene expression and catalytic activity of the minor PFK encoded by pfkB. These fluxomic studies also revealed the important role of acetate synthetic pathway in anaerobic lactate production. Moreover, flux analysis suggested that independent of genetic background, optimal relative flux distributions in cells could be achieved faster than physiological parameters such as nutrient utilization rate. (c) 2006 Wiley Periodicals, Inc.

Energy Conservation Alternatives Study (ECAS): Conceptual Design and Implementation Assessment of a Utility Steam Plant with Conventional Furnace and Wet Lime Stack Gas Scrubbers

NASA Technical Reports Server (NTRS)

Brown, Dale H.

1976-01-01

A study was performed to estimate the technical/economic characteristics of a steam power plant (3500 pounds per square inch gauge, 1000 degrees Fahrenheit / 1000 degrees Fahrenheit) with a coal-burning radiant furnace and a wet lime stack gas scrubber to control sulfur emissions. Particulate emissions were controlled by an electrostatic precipitator operating at 300 degrees Fahrenheit. The stack gas from the scrubber was reheated from 125 degrees Fahrenheit to 250 degrees Fahrenheit as a base case, and from 125 degrees Fahrenheit to 175 degrees Fahrenheit as an alternate case. The study was performed on a basis consistent with the General Electric ECAS Phase II evaluation of advanced energy conversion systems for electric utility baseload applications using coal or coal-derived fuels. A conceptual design of the power plant was developed, including the on-site calcination of limestone to lime and the provision of sludge ponds to store the products of flue gas scrubbing. From this design, estimates were derived for power plant efficiency, capital cost, environmental intrusion characteristics, natural resource requirements, and cost of electricity at an assumed capacity factor of 65 percent. An implementation assessment was performed where factors affecting applicability of the conceptual design power plant in electric utility generation systems were appraised. At 250 degrees Fahrenheit and 175 degrees Fahrenheit stack gas temperatures respectively, the plants showed a cost of electricity of 39.8 and 37.0 mills per kilowatt-hours and overall plant efficiencies of 32 percent and 34 percent.

Final Technical Report: Commercial Advanced Lighting Control (ALC) Demonstration and Deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnold, Gabe

This three-year demonstration and deployment project sought to address market barriers to accelerating the adoption of Advanced Lighting Controls (ALCs), an underutilized technology with low market penetration. ALCs are defined as networked, addressable lighting control systems that utilize software or intelligent controllers to combine multiple energy-saving lighting control strategies in a single space (e.g., smart-time scheduling, daylight harvesting, task tuning, occupancy control, personal control, variable load-shedding, and plug-load control). The networked intelligent aspect of these systems allows applicable lighting control strategies to be combined in a single space, layered over one another, maximizing overall energy-savings. The project included five realmore » building demonstrations of ALCs across the Northeast US region. The demonstrations provided valuable data and experience to support deployment tasks that are necessary to overcome market barriers. These deployment tasks included development of training resources for building designers, installers, and trades, as well as development of new energy efficiency rebates for the technology from Efficiency Forward’s utility partners. Educating designers, installers, and trades on ALCs is a critical task for reducing the cost of the technology that is currently inflated due to perceived complexity and unfamiliarity with how to design and install the systems. Further, utility and non-utility energy efficiency programs continue to relegate the technology to custom or ill-suited prescriptive program designs that do not effectively deploy the technology at scale. This project developed new, scalable rebate approaches for the technology. Efficiency Forward utilized their DesignLights Consortium® (DLC) brand and network of 81 DLC member utilities to develop and deploy the results of the project. The outputs of the project have included five published case studies, a six-hour ALC technology training curriculum that has already been deployed in five US states, and new rebates offered for the technology that have been deployed by a dozen utilities across the US. Widespread adoption of ALC technology in commercial buildings would provide tremendous benefits. The current market penetration of ALC systems is estimated at <0.1% in commercial buildings. If ALC systems were installed in all commercial buildings, approximately 1,051 TBtu of energy could be saved. This would translate into customer cost savings of approximately $10.7 billion annually.« less

Utilization of the developed cell story eBook through storytelling

NASA Astrophysics Data System (ADS)

Tecson, Christine Mae B.; Soleria, Honey Joy B.; Taranza, Victoria; Tabudlong, Josefina M.; Salic-Hairulla, Monera

2018-01-01

The main objective of this research was to develop a Cell story eBook and utilize it through storytelling and find out how it impacts the conceptual knowledge of Grade 7 students about the Cell organelles and their functions. A total of one hundred twenty-nine respondents (129) were involved in the study, one hundred twenty-four (124) of the respondents were Grade 7 students, two (2) biology in-service teachers from Integrated Developmental School, MSUIIT, two (2) ICT experts from MSU-IIT, and one in-service biology teacher from Iligan City National High School. The study employed was a Quasi-experimental design with two-group (experimental and control groups) pre-test-post-test design. The instruments used were a 20-item multiple choice tests for the pre-test and post-test and a rubric for the evaluation of the Cell Story eBook. The researchers developed the Cell story eBook through a pre-assessment, identification of the topic, formulation of objectives, making of the story, making of the storyboard, designing of the Cell story eBook, evaluation of the Cell story eBook, final revision and publication in PDF format. During the utilization stage, the experimental group was presented with the Cell story eBook through storytelling while the control group was taught using traditional lecture method. Findings show that the developed Cell story eBook was rated Excellent by the panel of experts. Moreover, there is a statistically significant difference between the post-tests of the two groups. Results signifies that there is a distinction between the performances of the two groups which means that there is an existing impact after the utilization of the developed Cell story eBook through storytelling inside the classroom. The said developed instructional material and the way it was utilized therefore, affects the conceptual knowledge of the learners. The developed Cell story eBook can also be utilized even in the absence of technology due to its flexibility. It can be printed as a hard copy for further utilization especially for those schools that still lacks appropriate learning facilities which is a common situation in the Philippines.

The Effects of Geography and Spatial Behavior on Health Care Utilization among the Residents of a Rural Region

PubMed Central

Arcury, Thomas A; Gesler, Wilbert M; Preisser, John S; Sherman, Jill; Spencer, John; Perin, Jamie

2005-01-01

Objective This analysis determines the importance of geography and spatial behavior as predisposing and enabling factors in rural health care utilization, controlling for demographic, social, cultural, and health status factors. Data Sources A survey of 1,059 adults in 12 rural Appalachian North Carolina counties. Study Design This cross-sectional study used a three-stage sampling design stratified by county and ethnicity. Preliminary analysis of health services utilization compared weighted proportions of number of health care visits in the previous 12 months for regular check-up care, chronic care, and acute care across geographic, sociodemographic, cultural, and health variables. Multivariable logistic models identified independent correlates of health services utilization. Data Collection Methods Respondents answered standard survey questions. They located places in which they engaged health related and normal day-to-day activities; these data were entered into a geographic information system for analysis. Principal Findings Several geographic and spatial behavior factors, including having a driver's license, use of provided rides, and distance for regular care, were significantly related to health care utilization for regular check-up and chronic care in the bivariate analysis. In the multivariate model, having a driver's license and distance for regular care remained significant, as did several predisposing (age, gender, ethnicity), enabling (household income), and need (physical and mental health measures, number of conditions). Geographic measures, as predisposing and enabling factors, were related to regular check-up and chronic care, but not to acute care visits. Conclusions These results show the importance of geographic and spatial behavior factors in rural health care utilization. They also indicate continuing inequity in rural health care utilization that must be addressed in public policy. PMID:15663706

Chemokine Prostate Cancer Biomarkers — EDRN Public Portal

Cancer.gov

STUDY DESIGN 1. The need for pre-validation studies. Preliminary data from our laboratory demonstrates a potential utility for CXCL5 and CXCL12 as biomarkers to distinguish between patients at high-risk versus low-risk for harboring prostate malignancies. However, this pilot and feasibility study utilized a very small sample size of 51 patients, which limited the ability of this study to adequately assess certain technical aspects of the ELISA technique and statistical aspects of we propose studies designed assess the robustness (Specific Aim 1) and predictive value (Specific Aim 2) of these markers in a larger study population. 2. ELISA Assays. Serum, plasma, or urine chemokine levels are assessed using 50 ul frozen specimen per sandwich ELISA in duplicate using the appropriate commercially-available capture antibodies, detection antibodies, and standard ELISA reagents (R&D; Systems), as we have described previously (15, 17, 18). Measures within each patient group are regarded as biological replicates and permit statistical comparisons between groups. For all ELISAs, a standard curve is generated with the provided standards and utilized to calculate the quantity of chemokine in the sample tested. These assays provide measures of protein concentration with excellent reproducibility, with replicate measures characterized by standard deviations from the mean on the order of <3%.

Utilization of Minor Actinides as a Fuel Component for Ultra-Long Life Bhr Configurations: Designs, Advantages and Limitations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Pavel V. Tsvetkov

2009-05-20

This project assessed the advantages and limitations of using minor actinides as a fuel component to achieve ultra-long life Very High Temperature Reactor (VHTR) configurations. Researchers considered and compared the capabilities of pebble-bed and prismatic core designs with advanced actinide fuels to achieve ultra-long operation without refueling. Since both core designs permit flexibility in component configuration, fuel utilization, and fuel management, it is possible to improve fissile properties of minor actinides by neutron spectrum shifting through configuration adjustments. The project studied advanced actinide fuels, which could reduce the long-term radio-toxicity and heat load of high-level waste sent to a geologicmore » repository and enable recovery of the energy contained in spent fuel. The ultra-long core life autonomous approach may reduce the technical need for additional repositories and is capable to improve marketability of the Generation IV VHTR by allowing worldwide deployment, including remote regions and regions with limited industrial resources. Utilization of minor actinides in nuclear reactors facilitates developments of new fuel cycles towards sustainable nuclear energy scenarios.« less

Concept development of a Mach 4 high-speed civil transport

NASA Technical Reports Server (NTRS)

Domack, Christopher S.; Dollyhigh, Samuel M.; Beissner, Fred L., Jr.; Geiselhart, Karl A.; Mcgraw, Marvin E., Jr.; Shields, Elwood W.; Swanson, Edward E.

1990-01-01

A study was conducted to configure and analyze a 250 passenger, Mach 4 High Speed Civil Transport with a design range of 6500 n.mi. The design mission assumed an all-supersonic cruise segment and no community noise or sonic boom constraints. The study airplane was developed in order to examine the technology requirements for such a vehicle and to provide an unconstrained baseline from which to assess changes in technology levels, sonic boom limits, or community noise constraints in future studies. The propulsion, structure, and materials technologies utilized in the sizing of the study aircraft were assumed to represent a technology availability date of 2015. The study airplane was a derivative of a previously developed Mach 3 concept and utilized advanced afterburning turbojet engines and passive airframe thermal protection. Details of the configuration development, aerodynamic design, propulsion system, mass properties, and mission performance are presented. The study airplane was estimated to weigh approx. 866,000 lbs. Although an aircraft of this size is a marginally acceptable candidate to fit into the world airport infrastructure, it was concluded that the inclusion of community noise or sonic boom constraints would quickly cause the aircraft to grow beyond acceptable limits using the assumed technology levels.

Protecting count queries in study design

PubMed Central

Sarwate, Anand D; Boxwala, Aziz A

2012-01-01

Objective Today's clinical research institutions provide tools for researchers to query their data warehouses for counts of patients. To protect patient privacy, counts are perturbed before reporting; this compromises their utility for increased privacy. The goal of this study is to extend current query answer systems to guarantee a quantifiable level of privacy and allow users to tailor perturbations to maximize the usefulness according to their needs. Methods A perturbation mechanism was designed in which users are given options with respect to scale and direction of the perturbation. The mechanism translates the true count, user preferences, and a privacy level within administrator-specified bounds into a probability distribution from which the perturbed count is drawn. Results Users can significantly impact the scale and direction of the count perturbation and can receive more accurate final cohort estimates. Strong and semantically meaningful differential privacy is guaranteed, providing for a unified privacy accounting system that can support role-based trust levels. This study provides an open source web-enabled tool to investigate visually and numerically the interaction between system parameters, including required privacy level and user preference settings. Conclusions Quantifying privacy allows system administrators to provide users with a privacy budget and to monitor its expenditure, enabling users to control the inevitable loss of utility. While current measures of privacy are conservative, this system can take advantage of future advances in privacy measurement. The system provides new ways of trading off privacy and utility that are not provided in current study design systems. PMID:22511018

Protecting count queries in study design.

PubMed

Vinterbo, Staal A; Sarwate, Anand D; Boxwala, Aziz A

2012-01-01

Today's clinical research institutions provide tools for researchers to query their data warehouses for counts of patients. To protect patient privacy, counts are perturbed before reporting; this compromises their utility for increased privacy. The goal of this study is to extend current query answer systems to guarantee a quantifiable level of privacy and allow users to tailor perturbations to maximize the usefulness according to their needs. A perturbation mechanism was designed in which users are given options with respect to scale and direction of the perturbation. The mechanism translates the true count, user preferences, and a privacy level within administrator-specified bounds into a probability distribution from which the perturbed count is drawn. Users can significantly impact the scale and direction of the count perturbation and can receive more accurate final cohort estimates. Strong and semantically meaningful differential privacy is guaranteed, providing for a unified privacy accounting system that can support role-based trust levels. This study provides an open source web-enabled tool to investigate visually and numerically the interaction between system parameters, including required privacy level and user preference settings. Quantifying privacy allows system administrators to provide users with a privacy budget and to monitor its expenditure, enabling users to control the inevitable loss of utility. While current measures of privacy are conservative, this system can take advantage of future advances in privacy measurement. The system provides new ways of trading off privacy and utility that are not provided in current study design systems.

Low grade bioethanol for fuel mixing on gasoline engine using distillation process

NASA Astrophysics Data System (ADS)

Abikusna, Setia; Sugiarto, Bambang; Suntoro, Dedi; Azami

2017-03-01

Utilization of renewable energy in Indonesia is still low, compared to 34% oil, 20% coal and 20% gas, utilization of energy sources for water 3%, geothermal 1%, 2% biofuels, and biomass 20%. Whereas renewable energy sources dwindling due to the increasing consumption of gasoline as a fuel. It makes us have to look for alternative renewable energy, one of which is bio ethanol. Several studies on the use of ethanol was done to the researchers. Our studies using low grade bio ethanol which begins with the disitillation independently utilize flue gas heat at compact distillator, produces high grade bio ethanol and ready to be mixed with gasoline. Stages of our study is the compact distillator design of the motor dynamic continued with good performance and emission testing and ethanol distilled. Some improvement is made is through the flue gas heat control mechanism in compact distillator using gate valve, at low, medium, and high speed engine. Compact distillator used is kind of a batch distillation column. Column design process using the shortcut method, then carried the tray design to determine the overall geometry. The distillation is done by comparing the separator with a tray of different distances. As well as by varying the volume of the feed and ethanol levels that will feed distilled. In this study, we analyzed the mixing of ethanol through variation between main jet and pilot jet in the carburetor separately interchangeably with gasoline. And finally mixing mechanism bio ethanol with gasoline improved with fuel mixer for performance.

Coordinating resources for prospective medication risk management of older home care clients in primary care: procedure development and RCT study design for demonstrating its effectiveness.

PubMed

Toivo, Terhi; Dimitrow, Maarit; Puustinen, Juha; Savela, Eeva; Pelkonen, Katariina; Kiuru, Valtteri; Suominen, Tuula; Kinnunen, Sirkka; Uunimäki, Mira; Kivelä, Sirkka-Liisa; Leikola, Saija; Airaksinen, Marja

2018-03-16

The magnitude of safety risks related to medications of the older adults has been evidenced by numerous studies, but less is known of how to manage and prevent these risks in different health care settings. The aim of this study was to coordinate resources for prospective medication risk management of home care clients ≥ 65 years in primary care and to develop a study design for demonstrating effectiveness of the procedure. Health care units involved in the study are from primary care in Lohja, Southern Finland: home care (191 consented clients), the public healthcare center, and a private community pharmacy. System based risk management theory and action research method was applied to construct the collaborative procedure utilizing each profession's existing resources in medication risk management of older home care clients. An inventory of clinical measures in usual clinical practice and systematic review of rigorous study designs was utilized in effectiveness study design. The new coordinated medication management model (CoMM) has the following 5 stages: 1) practical nurses are trained to identify clinically significant drug-related problems (DRPs) during home visits and report those to the clinical pharmacist. Clinical pharmacist prepares the cases for 2) an interprofessional triage meeting (50-70 cases/meeting of 2 h) where decisions are made on further action, e.g., more detailed medication reviews, 3) community pharmacists conduct necessary medication reviews and each patients' physician makes final decisions on medication changes needed. The final stages concern 4) implementation and 5) follow-up of medication changes. Randomized controlled trial (RCT) was developed to demonstrate the effectiveness of the procedure. The developed procedure is feasible for screening and reviewing medications of a high number of older home care clients to identify clients with severe DRPs and provide interventions to solve them utilizing existing primary care resources. The study is registered in the Clinical Trials.gov ( NCT02545257 ). Registration date September 9 2015.

The role and benefits of accessing primary care patient records during unscheduled care: a systematic review.

PubMed

Bowden, Tom; Coiera, Enrico

2017-09-22

The purpose of this study was to assess the impact of accessing primary care records on unscheduled care. Unscheduled care is typically delivered in hospital Emergency Departments. Studies published to December 2014 reporting on primary care record access during unscheduled care were retrieved. Twenty-two articles met inclusion criteria from a pool of 192. Many shared electronic health records (SEHRs) were large in scale, servicing many millions of patients. Reported utilization rates by clinicians was variable, with rates >20% amongst health management organizations but much lower in nation-scale systems. No study reported on clinical outcomes or patient safety, and no economic studies of SEHR access during unscheduled care were available. Design factors that may affect utilization included consent and access models, SEHR content, and system usability and reliability. Despite their size and expense, SEHRs designed to support unscheduled care have been poorly evaluated, and it is not possible to draw conclusions about any likely benefits associated with their use. Heterogeneity across the systems and the populations they serve make generalization about system design or performance difficult. None of the reviewed studies used a theoretical model to guide evaluation. Value of Information models may be a useful theoretical approach to design evaluation metrics, facilitating comparison across systems in future studies. Well-designed SEHRs should in principle be capable of improving the efficiency, quality and safety of unscheduled care, but at present the evidence for such benefits is weak, largely because it has not been sought.

FRANOPP: Framework for analysis and optimization problems user's guide

NASA Technical Reports Server (NTRS)

Riley, K. M.

1981-01-01

Framework for analysis and optimization problems (FRANOPP) is a software aid for the study and solution of design (optimization) problems which provides the driving program and plotting capability for a user generated programming system. In addition to FRANOPP, the programming system also contains the optimization code CONMIN, and two user supplied codes, one for analysis and one for output. With FRANOPP the user is provided with five options for studying a design problem. Three of the options utilize the plot capability and present an indepth study of the design problem. The study can be focused on a history of the optimization process or on the interaction of variables within the design problem.

Booster propulsion/vehicle impact study

NASA Technical Reports Server (NTRS)

Weldon, Vincent; Dunn, Michael; Fink, Lawrence; Phillips, Dwight; Wetzel, Eric

1988-01-01

The use of hydrogen RP-1, propane, and methane as fuels for booster engines of launch vehicles is discussed. An automated procedure for integrated launch vehicle, engine sizing, and design optimization was used to define two stage and single stage concepts for minimum dry weight. The two stage vehicles were unmanned and used a flyback booster and partially reusable orbiter. The single stage designs were fully reusable, manned flyback vehicles. Comparisons of these vehicle designs, showing the effects of using different fuels, as well as sensitivity and trending data, are presented. In addition, the automated design technique utilized for the study is described.

Study of free-piston Stirling engine driven linear alternators

NASA Technical Reports Server (NTRS)

Nasar, S. A.; Chen, C.

1987-01-01

The analysis, design and operation of single phase, single slot tubular permanent magnet linear alternator is presented. Included is the no-load and on-load magnetic field investigation, permanent magnet's leakage field analysis, parameter identification, design guidelines and an optimal design of a permanent magnet linear alternator. For analysis of the magnetic field, a simplified magnetic circuit is utilized. The analysis accounts for saturation, leakage and armature reaction.

Design, Development and Utilization Perspectives on Database Management Systems

ERIC Educational Resources Information Center

Shneiderman, Ben

1977-01-01

This paper reviews the historical development of integrated data base management systems and examines competing approaches. Topics include management and utilization, implementation and design, query languages, security, integrity, privacy and concurrency. (Author/KP)

The Ambulatory Integration of the Medical and Social (AIMS) model: A retrospective evaluation.

PubMed

Rowe, Jeannine M; Rizzo, Victoria M; Shier Kricke, Gayle; Krajci, Kate; Rodriguez-Morales, Grisel; Newman, Michelle; Golden, Robyn

2016-01-01

An exploratory, retrospective evaluation of Ambulatory Integration of the Medical and Social (AIMS), a care coordination model designed to integrate medical and non-medical needs of patients and delivered exclusively by social workers was conducted to examine mean utilization of costly health care services for older adult patients. Results reveal mean utilization of 30-day hospital readmissions, emergency department (ED) visits, and hospital admissions are significantly lower for the study sample compared to the larger patient population. Comparisons with national population statistics reveal significantly lower mean utilization of 30-day admissions and ED visits for the study sample. The findings offer preliminary support regarding the value of AIMS.

75 FR 4548 - Pend Oreille County Public Utility District; Notice of Designation of Commission Staff as Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-28

... Oreille County Public Utility District; Notice of Designation of Commission Staff as Non-Decisional January 21, 2010. Commission staff member James Hastreiter (Office of Energy Projects, 503-552-2760; [email protected] ) is hereby designated as ``non-decisional'' staff and assigned to participate in...

Protocell design through modular compartmentalization

PubMed Central

Miller, David; Booth, Paula J.; Seddon, John M.; Templer, Richard H.; Law, Robert V.; Woscholski, Rudiger; Ces, Oscar; Barter, Laura M. C.

2013-01-01

De novo synthetic biological design has the potential to significantly impact upon applications such as energy generation and nanofabrication. Current designs for constructing organisms from component parts are typically limited in scope, as they utilize a cut-and-paste ideology to create simple stepwise engineered protein-signalling pathways. We propose the addition of a new design element that segregates components into lipid-bound ‘proto-organelles’, which are interfaced with response elements and housed within a synthetic protocell. This design is inspired by living cells, which utilize multiple types of signalling molecules to facilitate communication between isolated compartments. This paper presents our design and validation of the components required for a simple multi-compartment protocell machine, for coupling a light transducer to a gene expression system. This represents a general design concept for the compartmentalization of different types of artificial cellular machinery and the utilization of non-protein signal molecules for signal transduction. PMID:23925982

Protocell design through modular compartmentalization.

PubMed

Miller, David; Booth, Paula J; Seddon, John M; Templer, Richard H; Law, Robert V; Woscholski, Rudiger; Ces, Oscar; Barter, Laura M C

2013-10-06

De novo synthetic biological design has the potential to significantly impact upon applications such as energy generation and nanofabrication. Current designs for constructing organisms from component parts are typically limited in scope, as they utilize a cut-and-paste ideology to create simple stepwise engineered protein-signalling pathways. We propose the addition of a new design element that segregates components into lipid-bound 'proto-organelles', which are interfaced with response elements and housed within a synthetic protocell. This design is inspired by living cells, which utilize multiple types of signalling molecules to facilitate communication between isolated compartments. This paper presents our design and validation of the components required for a simple multi-compartment protocell machine, for coupling a light transducer to a gene expression system. This represents a general design concept for the compartmentalization of different types of artificial cellular machinery and the utilization of non-protein signal molecules for signal transduction.

Preliminary Component Integration Utilizing Rapid Prototyping Techniques

NASA Technical Reports Server (NTRS)

Cooper, K.; Salvail, P.

2001-01-01

One of the most costly errors committed during the development of an element to be used in the space industry is the lack of communication between design and manufacturing engineers. A very important tool that should be utilized in the development stages by both design and manufacturing disciplines is rapid prototyping. Communication levels are intensified with the injection of functional models that are generated from a drawing. At the Marshall Space Flight Center, this discipline is utilized on a more frequent basis as a manner by which hardware may be tested for design and material compatibility.

Improvements in the efficiency of turboexpanders in cryogenic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agahi, R.R.; Lin, M.C.; Ershaghi, B.

1996-12-31

Process designers have utilized turboexpanders in cryogenic processes because of their higher thermal efficiencies when compared with conventional refrigeration cycles. Process design and equipment performance have improved substantially through the utilization of modern technologies. Turboexpander manufacturers have also adopted Computational Fluid Dynamic Software, Computer Numerical Control Technology and Holography Techniques to further improve an already impressive turboexpander efficiency performance. In this paper, the authors explain the design process of the turboexpander utilizing modern technology. Two cases of turboexpanders processing helium (4.35{degrees}K) and hydrogen (56{degrees}K) will be presented.

Utilizing geogebra in financial mathematics problems: didactic experiment in vocational college

NASA Astrophysics Data System (ADS)

Ghozi, Saiful; Yuniarti, Suci

2017-12-01

GeoGebra application offers users to solve real problems in geometry, statistics, and algebra fields. This studydeterminesthe effect of utilizing Geogebra on students understanding skill in the field of financial mathematics. This didactic experiment study used pre-test-post-test control group design. Population of this study were vocational college students in Banking and Finance Program of Balikpapan State Polytechnic. Two classes in the first semester were chosen using cluster random sampling technique, one class as experiment group and one class as control group. Data were analysed used independent sample t-test. The result of data analysis showed that students understanding skill with learning by utilizing GeoGeobra is better than students understanding skill with conventional learning. This result supported that utilizing GeoGebra in learning can assist the students to enhance their ability and depth understanding on mathematics subject.

How Are the Costs of Care for Medical Falls Distributed? The Costs of Medical Falls by Component of Cost, Timing, and Injury Severity

ERIC Educational Resources Information Center

Bohl, Alex A.; Phelan, Elizabeth A.; Fishman, Paul A.; Harris, Jeffrey R.

2012-01-01

Purpose of the Study: To examine the components of cost that drive increased total costs after a medical fall over time, stratified by injury severity. Design and Methods: We used 2004-2007 cost and utilization data for persons enrolled in an integrated care delivery system. We used a longitudinal cohort study design, where each individual…

Department of Clinical Investigation Annual Research Progress Report, Fiscal Year 1993. Volume 1

DTIC Science & Technology

1993-10-01

monocytes, total periphernuclear cells, and alveolar macrophages from four study groups : patients with concurrent Mycobacterium tuberculosis (MTBI and...research design, similar to the Solomon Four Group design will be utilized to determine if the educational intervention provided has an impact on nurses...members with approved protocols: 173 Number of approved protocols held by this group : 230 Drug evaluation/comparison studies : 94 (Does not include

Is Self-Regulation "All in the family"? Testing Environmental Effects using Within-Family Quasi-Experiments.

PubMed

Deater-Deckard, Kirby

2016-05-01

Most of the individual difference variance in the population is found within families, yet studying the processes causing this variation is difficult due to confounds between genetic and nongenetic influences. Quasi-experiments can be used to test hypotheses regarding environment exposure (e.g., timing, duration) while controlling for genetic confounds. To illustrate, two studies of cognitive self-regulation in childhood (i.e., working memory [WM], effortful control [EC], attention span/persistence [A/P]) are presented. Study 1 utilized an identical twin differences design ( N = 85 to 98 pairs) to control for genetic differences while using relative twin birth weight difference to predict relative twin difference in WM and EC. Larger relative twin difference in WM and EF was predicted by the combination of shorter gestation and larger relative birth weight difference. Study 2 utilized an adoptive sibling relative difference design ( N = 123 same-sex pairs) to control for genetic similarity while using relative sibling difference in the age at time of adoption to predict relative sibling difference in A/P. Larger relative sibling difference in A/P was predicted by the combination of larger relative difference in time in the adoptive home and age at adoption. Within-family quasi-experimental designs allow stronger inferences about hypothesized environmental influences than between-family designs permit.

From orbital debris capture systems through internal combustion engines on Mars

NASA Technical Reports Server (NTRS)

1991-01-01

The investigation and conceptualization of an orbital debris collector was the primary area of design. In addition, an alternate structural design for Space Station Freedom and systems supporting resource utilization at Mars and the moon were studied. Hardware for production of oxygen from simulate Mars atmosphere was modified to permit more reliable operation at low pressures (down to 10 mb). An internal combustion engine was altered to study how Mars atmosphere could be used as a diluent to control combustion temperatures and avoid excess Mars propellant production requirements that would result from either methane-rich or oxygen-rich, methane-oxygen combustion. An elastic loop traction system that could be used for lunar construction vehicles was refined to permit testing. A parabolic heat rejection radiator system was designed and built to determine whether it was capable of increasing heat rejection rates during lunar daytime operation. In addition, an alternate space station truss design, utilizing a pre-integrated concept, was studied and found to reduce estimate extravehicular activity (EVA) time and increase the structural integrity when compared to the original Warren truss concept. An orbital-debris-capturing spacecraft design which could be mated with the Orbital Maneuvering Vehicle was studied. The design identified Soviet C-1B boosters as the best targets of opportunity in Earth orbits between an altitude of 900 km and 1100 km and at an inclination of 82.9 deg. A dual robot pallet, which could be spun to match the tumbling rate of the C-1B booster, was developed as the conceptual design.

Shuttle interaction study extension

NASA Technical Reports Server (NTRS)

1982-01-01

The following areas of Space Shuttle technology were discussed: variable altitude strategy, spacecraft servicing, propellant storage, orbiter plume impingement, space based design, mating (docking and berthing), shuttle fleet utilization, and mission/traffic model.

Proceedings: 1989 electric utility franchise conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romo, R.G.

The primary purpose of the Conference was to present and discuss strategic issues related to franchising electric service. The theme for the conference was to both improve the management of existing franchises and the negotiation of new franchises. To promote a better understanding of the planning issues related to this theme, the following sessions were designed: (1) public utility franchising, (2) investor owned utility and community perspectives on franchising, (3) franchise case study presentations, (4) alternatives to franchise renewal: the public acquisition option, and (5) special franchise issues. The Conference combined results from research coupled with actual franchise negotiating experiences,more » and concepts and ideas considered or implemented by utilities, government agencies, consultants and others.« less

IPMC-driven thrust generation: a new conceptual design (Conference Presentation)

NASA Astrophysics Data System (ADS)

Olsen, Zakai; Kim, Kwang Jin

2017-04-01

Ionic Polymer-Metal Composites (IPMC) are highly functional actuators that find many uses in the field of soft robotics due to their low actuation voltage and ability to operate in aquatic environments. The actuation of an IPMC relies on the swelling of the negatively charged side when a potential is applied, due to the free-moving cations and water molecules migrating to that half. While this bending type actuation can be utilized to perform many tasks, it is ill suited for the primary propulsion mechanism in certain soft robotic applications. Here, a new conceptual design is presented which utilizes the bending of IPMC materials to achieve complex actuation motion in an attempt to generate a non-zero net thrust for propulsion of soft robots. The design capitalizes on advances in the manufacturing processes of electroactive polymer materials, which now allow for more complex shapes and thus new and unique modes of actuation. By utilizing the consistent bending deformation of IPMC actuators, in conjunction with carefully considered geometry, an IPMC driven body may serve as a primary mode of propulsion through a positive net thrust generation. This work consists of the initial feasibility study, concept testing, and optimization for such an actuator through computer modeling and simulation. COMSOL will be used for the finite element analysis to design the most efficient and optimized design for a positive net thrust generation. Such an IPMC design may find a great deal of applications, and the potential of future integration into other soft robotic systems is considered.

An analysis of the influence of framework aspects on the study design of health economic modeling evaluations.

PubMed

Gurtner, Sebastian

2013-04-01

Research and practical guidelines have many implications for how to structure a health economic study. A major focus in recent decades has been the quality of health economic research. In practice, the factors influencing a study design are not limited to the quest for quality. Moreover, the framework of the study is important. This research addresses three major questions related to these framework aspects. First, we want to know whether the design of health economic studies has changed over time. Second, we want to know how the subject of a study, whether it is a process or product innovation, influences the parameters of the study design. Third, one of the most important questions we will answer is whether and how the study's source of funding has an impact on the design of the research. To answer these questions, a total of 234 health economic studies were analyzed using a correspondence analysis and a logistic regression analysis. All three categories of framework factors have an influence on the aspects of the study design. Health economic studies have evolved over time, leading to the use of more advanced methods like complex sensitivity analyses. Additionally, the patient's point of view has increased in importance. The evaluation of product innovations has focused more on utility concepts. On the other hand, the source of funding may influence only a few aspects of the study design, such as the use of evaluation methods, the source of data, and the use of certain utility measures. The most important trends in health care, such as the emphasis on the patients' point of view, become increasingly established in health economic evaluations with the passage of time. Although methodological challenges remain, modern information and communication technologies provide a basis for increasing the complexity and quality of health economic studies if used frequently.

Programmable rate modem utilizing digital signal processing techniques

NASA Technical Reports Server (NTRS)

Bunya, George K.; Wallace, Robert L.

1989-01-01

The engineering development study to follow was written to address the need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either binary phase shift keying (BPSK) or quadrature phase shift keying (QPSK) modulation. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. Here design tradeoffs in each portion of the modulator and demodulator subsystem are outlined, and viable circuit approaches which are easily repeatable, have low implementation losses and have low production costs are identified. The research involved for this study was divided into nine technical papers, each addressing a significant region of concern in a variable rate modem design. Trivial portions and basic support logic designs surrounding the nine major modem blocks were omitted. In brief, the nine topic areas were: (1) Transmit Data Filtering; (2) Transmit Clock Generation; (3) Carrier Synthesizer; (4) Receive AGC; (5) Receive Data Filtering; (6) RF Oscillator Phase Noise; (7) Receive Carrier Selectivity; (8) Carrier Recovery; and (9) Timing Recovery.

Effects of digital game-based learning on student engagement and academic achievement

NASA Astrophysics Data System (ADS)

Little, Timothy W.

This experimental study was designed to determine the effect of digital game-based learning on student engagement and academic achievement. The sample was comprised of 34 students enrolled in a secondary Biology class in a rural public school. The study utilized an experimental pretest-posttest design with switching replications. After random assignment, students participated in one of two supplemental learning activities: playing a digital game designed to review science concepts or participating in a lab to review the same concepts. Students subsequently switched activities. Student achievement data were collected on mastery of science concepts, and student engagement data were collected utilizing self- and teacher-reported measures. Data were analyzed using analysis of variance (ANOVA) with repeated measures. Results demonstrated that the digital game was as effective as the lab activity at increasing teacher-reported student engagement and academic achievement. These findings may be of interest to school administrators or directors of teacher preparation programs on the potential effectiveness of digital games as a learning tool.

Analysis of advanced optical glass and systems

NASA Technical Reports Server (NTRS)

Johnson, R. Barry; Feng, Chen

1991-01-01

Optical lens systems performance utilizing optical materials comprising reluctant glass forming compositions was studied. Such special glasses are being explored by NASA/Marshall Space Flight Center (MSFC) researchers utilizing techniques such as containerless processing in space on the MSFC Acoustic Levitation Furnace and on the High Temperature Acoustic Levitation Furnace in the conceptual design phase for the United States Microgravity Laboratory (USML) series of shuttle flights. The application of high refractive index and low dispersive power glasses in optical lens design was investigated. The potential benefits and the impacts to the optical lens design performance were evaluated. The results of the studies revealed that the use of these extraordinary glasses can result in significant optical performance improvements. Recommendations of proposed optical properties for potential new glasses were also made. Applications of these new glasses are discussed, including the impact of high refractive index and low dispersive power, improvements of the system performance by using glasses which are located outside of traditional glass map, and considerations in establishing glass properties beyond conventional glass map limits.

Questionnaire design and the recall of pharmacological treatments: a systematic review.

PubMed

Gama, Helena; Correia, Sofia; Lunet, Nuno

2009-03-01

We aimed to review systematically the published evidence regarding the effect of questionnaire design on the recall of pharmacological treatments. The electronic databases Pubmed, EMBASE, and Cochrane Library were searched from inception to October 2007, using the following search terms: drug utilization, pharmaceutical preparations, pharmacoepidemiology, validation studies, methods, epidemiologic methods, interviews, data collection, and questionnaires. Drug utilization studies comparing different types of questionnaire or methods of questionnaire administration were included. Backward and forward citation tracking were also conducted. Eight studies were included in the systematic review, comparing questions asking for specific drugs or indications with open-ended questions (n = 5), evaluating the use of memory aids (n = 1), or studying the influence of response order on recall (n = 2). The studies were heterogeneous, namely regarding the populations evaluated (e.g., pregnant women, hypertensive patients, general population), mode of questionnaire administration (e.g., personal or telephone interview, self-administered), recall period (e.g., current use, 1 week, previous episode of a disease), or drugs evaluated (e.g., analgesics, antimalarials, all medicines). Despite the lack of standardization in presentation of results, the prevalence of drug use may vary between 5 and 40% when drug names and indications or pictures are used as memory aids, or as a result of primacy effects in self-administered questionnaires. The yielding of the questionnaires depended on the pharmacological groups evaluated. Scientific work regarding methods for drug utilization data collection is scarce. The available evidence highlights the importance of knowing the questionnaire characteristics for a proper interpretation of results from drug utilization studies. (c) 2009 John Wiley & Sons, Ltd.

Design study of wind turbines 50 kW to 3000 kW for electric utility applications. Volume 3: Supplementary design and analysis tasks

NASA Technical Reports Server (NTRS)

1976-01-01

Additional design and analysis data are provided to supplement the results of the two parallel design study efforts. The key results of the three supplemental tasks investigated are: (1) The velocity duration profile has a significant effect in determining the optimum wind turbine design parameters and the energy generation cost. (2) Modest increases in capacity factor can be achieved with small increases in energy generation costs and capital costs. (3) Reinforced concrete towers that are esthetically attractive can be designed and built at a cost comparable to those for steel truss towers. The approach used, method of analysis, assumptions made, design requirements, and the results for each task are discussed in detail.

International Space Station External Contamination Environment for Space Science Utilization

NASA Technical Reports Server (NTRS)

Soares, Carlos E.; Mikatarian, Ronald R.; Steagall, Courtney A.; Huang, Alvin Y.; Koontz, Steven; Worthy, Erica

2014-01-01

The International Space Station (ISS) is the largest and most complex on-orbit platform for space science utilization in low Earth orbit. Multiple sites for external payloads, with exposure to the associated natural and induced environments, are available to support a variety of space science utilization objectives. Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle. The ISS has been designed, built and integrated with strict contamination requirements to provide low levels of induced contamination on external payload assets. This paper addresses the ISS induced contamination environment at attached payload sites, both at the requirements level as well as measurements made on returned hardware, and contamination forecasting maps being generated to support external payload topology studies and science utilization.

Thermal energy storage heat exchanger: Molten salt heat exchanger design for utility power plants

NASA Technical Reports Server (NTRS)

Ferarra, A.; Yenetchi, G.; Haslett, R.; Kosson, R.

1977-01-01

Sizing procedures are presented for latent heat thermal energy storage systems that can be used for electric utility off-peak energy storage, solar power plants and other preliminary design applications.

Computer programs: Electronic circuit design criteria: A compilation

NASA Technical Reports Server (NTRS)

1973-01-01

A Technology Utilization Program for the dissemination of information on technological developments which have potential utility outside the aerospace community is presented. The 21 items reported herein describe programs that are applicable to electronic circuit design procedures.

The validity and utility of subtyping bulimia nervosa.

PubMed

van Hoeken, Daphne; Veling, Wim; Sinke, Sjoukje; Mitchell, James E; Hoek, Hans W

2009-11-01

To review the evidence for the validity and utility of subtyping bulimia nervosa (BN) into a purging (BN-P) and a nonpurging subtype (BN-NP), and of distinguishing BN-NP from binge eating disorder (BED), by comparing course, complications, and treatment. A literature search of psychiatry databases for studies published in peer-reviewed journals that used the DSM-definitions of BN and BED, and included both individuals with BN-NP and individuals with BN-P and/or BED. Twenty-three studies compared individuals with BN-NP (N = 671) to individuals with BN-P (N = 1795) and/or individuals with BED (N = 1921), two of which reported on course, 12 on comorbidity and none on treatment response-the indicators for validity and clinical utility. The differences found were mainly quantitative rather than qualitative, suggesting a gradual difference in severity from BN-P (most severe) through BN-NP to BED (least severe). None of the comparisons provided convincing evidence for the validity or utility of the BN-NP diagnosis. Three options for the position of BN-NP in DSM-V were suggested: (1) maintaining the BN-NP subtype, (2) dropping nonpurging compensatory behavior as a criterion for BN, so that individuals currently designated as having BN-NP would be designated as having BED, and (3) including BN-NP in a broad BN category.

Tropical Rainfall Measuring Mission (TRMM) project. VI - Spacecraft, scientific instruments, and launching rocket. Part 1 - Spacecraft

NASA Technical Reports Server (NTRS)

Keating, Thomas; Ihara, Toshio; Miida, Sumio

1990-01-01

A cooperative United States/Japan study was made for one year from 1987 to 1988 regarding the feasibility of the Tropical Rainfall Measuring Mission (TRMM). As part of this study a phase-A-level design of spacecraft for TRMM was developed by NASA/GSFC, and the result was documented in a feasibility study. The phase-A-level design is developed for the TRMM satellite utilizing a multimission spacecraft.

Algorithmic network monitoring for a modern water utility: a case study in Jerusalem.

PubMed

Armon, A; Gutner, S; Rosenberg, A; Scolnicov, H

2011-01-01

We report on the design, deployment, and use of TaKaDu, a real-time algorithmic Water Infrastructure Monitoring solution, with a strong focus on water loss reduction and control. TaKaDu is provided as a commercial service to several customers worldwide. It has been in use at HaGihon, the Jerusalem utility, since mid 2009. Water utilities collect considerable real-time data from their networks, e.g. by means of a SCADA system and sensors measuring flow, pressure, and other data. We discuss how an algorithmic statistical solution analyses this wealth of raw data, flexibly using many types of input and picking out and reporting significant events and failures in the network. Of particular interest to most water utilities is the early detection capability for invisible leaks, also a means for preventing large visible bursts. The system also detects sensor and SCADA failures, various water quality issues, DMA boundary breaches, unrecorded or unintended network changes (like a valve or pump state change), and other events, including types unforeseen during system design. We discuss results from use at HaGihon, showing clear operational value.

Design and Development of a Package for a Diluted Waveguide Electro-Absorption Modulator

DTIC Science & Technology

2008-11-01

the coupling efficiency. A design including mechanical, optical and RF elements was developed. A Newport Laser Welding system was utilized for...results, a design including mechanical, optical and RF elements was developed. A Newport Laser Welding system was utilized for fiber placement and...fixation. The laser welding techniques were customized in order to meet the needs of the EAM package design. Keywords: Electroabsorption

Multistate approaches in computational protein design

PubMed Central

Davey, James A; Chica, Roberto A

2012-01-01

Computational protein design (CPD) is a useful tool for protein engineers. It has been successfully applied towards the creation of proteins with increased thermostability, improved binding affinity, novel enzymatic activity, and altered ligand specificity. Traditionally, CPD calculations search and rank sequences using a single fixed protein backbone template in an approach referred to as single-state design (SSD). While SSD has enjoyed considerable success, certain design objectives require the explicit consideration of multiple conformational and/or chemical states. Cases where a “multistate” approach may be advantageous over the SSD approach include designing conformational changes into proteins, using native ensembles to mimic backbone flexibility, and designing ligand or oligomeric association specificities. These design objectives can be efficiently tackled using multistate design (MSD), an emerging methodology in CPD that considers any number of protein conformational or chemical states as inputs instead of a single protein backbone template, as in SSD. In this review article, recent examples of the successful design of a desired property into proteins using MSD are described. These studies employing MSD are divided into two categories—those that utilized multiple conformational states, and those that utilized multiple chemical states. In addition, the scoring of competing states during negative design is discussed as a current challenge for MSD. PMID:22811394

Perception of risks from electromagnetic fields: A psychometric evaluation of a risk-communication approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacGregor, D.G.; Slovic, P.; Morgan, M.G.

Potential health risks from exposure to power-frequency electromagnetic fields (EMF) have become an issue of significant public concern. This study evaluates a brochure designed to communicate EMF health risks from a scientific perspective. The study utilized a pretest-posttest design in which respondents judged various sources of EMF (and other) health and safety risks, both before reaching the brochure and after. Respondents assessed risks on dimensions similar to those utilized in previous studies of risk perception. In addition, detailed ratings were made that probed respondents' beliefs about the possible causal effects of EMF exposure. The findings suggest that naive beliefs aboutmore » the potential of EMF exposure to cause harm were highly influenced by specific content elements of the brochure. The implications for using risk-communication approaches based on communicating scientific uncertainty are discussed. 19 refs., 1 fig., 11 tabs.« less

Optimal front light design for reflective displays under different ambient illumination

NASA Astrophysics Data System (ADS)

Wang, Sheng-Po; Chang, Ting-Ting; Li, Chien-Ju; Bai, Yi-Ho; Hu, Kuo-Jui

2011-01-01

The goal of this study is to find out the optimal luminance and color temperature of front light for reflective displays in different ambient illumination by conducting series of psychophysical experiments. A color and brightness tunable front light device with ten LED units was built and been calibrated to present 256 luminance levels and 13 different color temperature at fixed luminance of 200 cd/m2. The experiment results revealed the best luminance and color temperature settings for human observers under different ambient illuminant, which could also assist the e-paper manufacturers to design front light device, and present the best image quality on reflective displays. Furthermore, a similar experiment procedure was conducted by utilizing new flexible e-signage display developed by ITRI and an optimal front light device for the new display panel has been designed and utilized.

Clinical utility of measures of breathlessness.

PubMed

Cullen, Deborah L; Rodak, Bernadette

2002-09-01

The clinical utility of measures of dyspnea has been debated in the health care community. Although breathlessness can be evaluated with various instruments, the most effective dyspnea measurement tool for patients with chronic lung disease or for measuring treatment effectiveness remains uncertain. Understanding the evidence for the validity and reliability of these instruments may provide a basis for appropriate clinical application. Evaluate instruments designed to measure breathlessness, either as single-symptom or multidimensional instruments, based on psychometrics foundations such as validity, reliability, and discriminative and evaluative properties. Classification of each dyspnea measurement instrument will recommend clinical application in terms of exercise, benchmarking patients, activities of daily living, patient outcomes, clinical trials, and responsiveness to treatment. Eleven dyspnea measurement instruments were selected. Each instrument was assessed as discriminative or evaluative and then analyzed as to its psychometric properties and purpose of design. Descriptive data from all studies were described according to their primary patient application (ie, chronic obstructive pulmonary disease, asthma, or other patient populations). The Borg Scale and the Visual Analogue Scale are applicable to exertion and thus can be applied to any cardiopulmonary patient to determine dyspnea. All other measures were determined appropriate for chronic obstructive pulmonary disease, whereas the Shortness of Breath Questionnaire can be applied to cystic fibrosis and lung transplant patients. The most appropriate utility for all instruments was measuring the effects on activities of daily living and for benchmarking patient progress. Instruments that quantify function and health-related quality of life have great utility for documenting outcomes but may be limited as to documenting treatment responsiveness in terms of clinically important changes. The dyspnea measurement instruments we studied meet important standards of validity and reliability. Discriminative measures have limited clinical utility and, when used for populations or conditions for which they are not designed or validated, the data collected may not be clinically relevant. Evaluative measures have greater clinical utility and can be applied for outcome purposes. Measures should be applied to the populations and conditions for which they were designed. The relationship between clinical therapies and the measurement of dyspnea as an outcome can develop as respiratory therapists become more comfortable with implementing dyspnea measurement instruments and use the data to improve patient treatment. Dyspnea evaluation should be considered for all clinical practice guidelines and care pathways.

Optimization under Uncertainty of a Biomass-integrated Renewable Energy Microgrid with Energy Storage

NASA Astrophysics Data System (ADS)

Zheng, Yingying

The growing energy demands and needs for reducing carbon emissions call more and more attention to the development of renewable energy technologies and management strategies. Microgrids have been developed around the world as a means to address the high penetration level of renewable generation and reduce greenhouse gas emissions while attempting to address supply-demand balancing at a more local level. This dissertation presents a model developed to optimize the design of a biomass-integrated renewable energy microgrid employing combined heat and power with energy storage. A receding horizon optimization with Monte Carlo simulation were used to evaluate optimal microgrid design and dispatch under uncertainties in the renewable energy and utility grid energy supplies, the energy demands, and the economic assumptions so as to generate a probability density function for the cost of energy. Case studies were examined for a conceptual utility grid-connected microgrid application in Davis, California. The results provide the most cost effective design based on the assumed energy load profile, local climate data, utility tariff structure, and technical and financial performance of the various components of the microgrid. Sensitivity and uncertainty analyses are carried out to illuminate the key parameters that influence the energy costs. The model application provides a means to determine major risk factors associated with alternative design integration and operating strategies.

Comparing Error Correction Procedures for Children Diagnosed with Autism

ERIC Educational Resources Information Center

Townley-Cochran, Donna; Leaf, Justin B.; Leaf, Ronald; Taubman, Mitchell; McEachin, John

2017-01-01

The purpose of this study was to examine the effectiveness of two error correction (EC) procedures: modeling alone and the use of an error statement plus modeling. Utilizing an alternating treatments design nested into a multiple baseline design across participants, we sought to evaluate and compare the effects of these two EC procedures used to…

Advanced Telemetry System Development.

DTIC Science & Technology

Progress in advanced telemetry system development is described. Discussions are included of studies leading to the specification for design...characteristics of adaptive and analytical telemetry systems in which the information efficiently utilizes the data channel capacity. Also discussed are...Progress indicates that further sophistication of existing designs in telemetry will be less advantageous than the development of new systems of

Content and Language Integrated Learning through an Online Game in Primary School: A Case Study

ERIC Educational Resources Information Center

Dourda, Kyriaki; Bratitsis, Tharrenos; Griva, Eleni; Papadopoulou, Penelope

2014-01-01

In this paper an educational design proposal is presented which combines two well established teaching approaches, that of Game-based Learning (GBL) and Content and Language Integrated Learning (CLIL). The context of the proposal was the design of an educational geography computer game, utilizing QR Codes and Google Earth for teaching English…

Some Issues in the Design, Selection and Utilization of Instructional Simulations in a Microcomputer Modality.

ERIC Educational Resources Information Center

Brandhorst, Allan R.

Some factors in the design of instructional micrcomputer simulations that high school social studies teachers must consider when selecting and using computer software are discussed: (1) Instructional computer simulations are adequate instructionally only to the extent that they make explicit the set of relationships underlying the program for the…

Sweet Grass Elementary School: A Study in Energy Conservation. Energy Conservation: School Design.

ERIC Educational Resources Information Center

Edmonton Public Schools (Alberta).

The results of building a new school in Edmonton (Alberta) in accordance with energy efficient principles are described in this report, the third and last in a series describing three projects utilizing different approaches to energy conservation. The Sweet Grass Elementary School project consisted in designing, building, and monitoring an energy…

Secondary Science Homework and Instructional Methodologies: An Investigation of the Alignment of Homework Assignments and Teachers' Self-Professed Instructional Methodology

ERIC Educational Resources Information Center

Lucas, Paul M.

2009-01-01

This study utilized a mixed-method design in order to investigate the alignment of secondary science teachers' instructional methodologies and their homework designs. Surveys were distributed to educators from a Center for Ocean Sciences Excellence Education (COSEE) database. Coding rubrics were developed to categorize the participants' responses…

Training Employees of a Public Iranian Bank on Emotional Intelligence Competencies

ERIC Educational Resources Information Center

Dadehbeigi, Mina; Shirmohammadi, Melika

2010-01-01

Purpose: The purpose of this paper is to examine the possibility of developing emotional intelligence (EI) as conceptualized in Boyatzis et al.'s competency model. Design/methodology/approach: Designing a context-based EI training program, the study utilized a sample of 68 fully-employed members of five branches of a public bank in Iran; each…

Faculty Designers and Instructional Design Skills for Developing Learning Opportunities in K-12 Environments

ERIC Educational Resources Information Center

Nativio, Alaine

2014-01-01

As K-12 environments discover different avenues to offer the best learning experiences available to students, schools are utilizing existing staff members to develop and teach traditional face-to-face, blended and online courses. The purpose of the study was to discover similarities and differences in processes, principles and strategies for…

Design requirements for operational earth resources ground data processing

NASA Technical Reports Server (NTRS)

Baldwin, C. J.; Bradford, L. H.; Burnett, E. S.; Hutson, D. E.; Kinsler, B. A.; Kugle, D. R.; Webber, D. S.

1972-01-01

Realistic tradeoff data and evaluation techniques were studied that permit conceptual design of operational earth resources ground processing systems. Methodology for determining user requirements that utilize the limited information available from users is presented along with definitions of sensor capabilities projected into the shuttle/station era. A tentative method is presented for synthesizing candidate ground processing concepts.

Teaching and Learning about Science Practices: Insights and Challenges in Professional Development

ERIC Educational Resources Information Center

Qablan, Ahmad

2016-01-01

The purpose of this study was to determine if science teachers showed a change in their ability to design and implement science lessons that integrate twenty-first century science practices as a result of their participation in a subject-specific professional development program. A qualitative design utilizing inductive analysis was used to…

Outcomes of a Structured Education Intervention for Latinas Concerning Breast Cancer and Mammography

ERIC Educational Resources Information Center

Laughman, Anna Bawtinhimer; Boselli, Danielle; Love, Magbis; Steuerwald, Nury; Symanowski, James; Blackley, Kris; Wheeler, Mellisa; Arevalo, Gustavo; Carrizosa, Daniel; Raghavan, Derek

2017-01-01

Objective: This study examined the utility of living room and church-based small group educational sessions on breast cancer and mammography, for under-served Latinas in North Carolina, USA. Design: Non-randomised, single arm design. Setting: A total of 329 self-selected Latinas participated in 31 small group educational classes in church and home…

Community College Faculty Perceptions of the Implementation of the Universal Design for Instruction Concept

ERIC Educational Resources Information Center

Rao-Delgado, Antoinette Toni C.

2010-01-01

Purpose: The purpose of this study was to explore the perceptions of community college faculty regarding their experiences in learning and implementing a new pedagogical concept, Universal Design for Instruction (UDI). Specifically, I explored (a) their perceptions regarding the utilization of the UDI concept on their teaching strategies, (b)…

A study of space station needs, attributes and architectural options. Final briefing: Cost working group discussion session

NASA Technical Reports Server (NTRS)

1983-01-01

The economic factors involved in the design and utilization of the space station are investigated. Topics include the economic benefits associated with research and production, the orbit transfer vehicle, and satellite servicing. Program costs and design options are examined. The possibilities of financing from the private sector are discussed.

Photovoltaic balance-of-system designs and costs at PVUSA

NASA Astrophysics Data System (ADS)

Reyes, A. B.; Jennings, C.

1995-05-01

This report is one in a series of 1994-1995 PVUSA reports that document PVUSA lessons learned at demonstration sites in California and Texas. During the last 7 years (1988 to 1994), 16 PV systems ranging from 20 kW to 500 kW have been installed. Six 20-kW emerging module technology (EMT) arrays and three turnkey (i.e., vendor designed and integrated) utility-scale systems were procured and installed at PVUSA's main test site in Davis, California. PVUSA host utilities have installed a total of seven EMT arrays and utility-scale systems in their service areas. Additional systems at Davis and host utility sites are planned. One of PVUSA's key objectives is to evaluate the performance, reliability, and cost of PV balance-of-system (BOS). In the procurement stage PVUSA encouraged innovative design to improve upon present practice by reducing maintenance, improving reliability, or lowering manufacturing or construction costs. The project team worked closely with suppliers during the design stage not only to ensure designs met functional and safety specifications, but to provide suggestions for improvement. This report, intended for the photovoltaic (PV) industry and for utility project managers and engineers considering PV plant construction and ownership, documents PVUSA utility-scale system design and cost lessons learned. Complementary PVUSA topical reports document: construction and safety experience; five-year assessment of EMTs; validation of the Kerman 500-kW grid-support PV plant benefits; PVUSA instrumentation and data analysis techniques; procurement, acceptance, and rating practices for PV power plants; experience with power conditioning units and power quality.

[Social Studies in the Out of Doors].

ERIC Educational Resources Information Center

Huchro, John; Fisch, Tom

Designed for instruction of emotionally handicapped children and youth, these six articles present concepts and activities relative to social studies and outdoor education. Defining social studies as the study of man and his relationship with his environment, the first article emphasizes a site analysis approach. Activity suggestions utilize a…

System Transformation in Patient-Centered Medical Home (PCMH): Variable Impact on Chronically Ill Patients' Utilization.

PubMed

Carlin, Caroline S; Flottemesch, Thomas J; Solberg, Leif I; Werner, Ann M

2016-01-01

Research connecting patient-centered medical homes (PCMHs) with improved quality and reduced utilization is inconsistent, possibly because individual domains of change, and the stage of change, are not incorporated in the research design. The objective of this study was to examine the association between stage and domain of change and patterns of health care utilization. This was a cross-sectional observational study that including 87 Minnesota clinics certified as medical homes. Patients included those receiving management for diabetes or cardiovascular disease with insurance coverage by payers participating in the study. PCMH transformation stage was defined by practice systems in place, with measurements summarized in 5 domains. Health care utilization was measured by total utilization, frequency of outpatient visits and prescriptions, and occurrence of inpatient and emergency department visits. PCMH transformation was associated with few changes in utilization, but there were important differences by the underlying domains of change. We demonstrate meaningful differences in the impact of PCMH transformation by diagnosis cohort and comorbidity status of the patient. Because the association of health care utilization with PCMH transformation varied by transformation domain and patient diagnosis, practice leaders need to be supported by research incorporating detailed measures of PCMH transformation. © Copyright 2016 by the American Board of Family Medicine.

Cost-effectiveness methodology for computer systems selection

NASA Technical Reports Server (NTRS)

Vallone, A.; Bajaj, K. S.

1980-01-01

A new approach to the problem of selecting a computer system design has been developed. The purpose of this methodology is to identify a system design that is capable of fulfilling system objectives in the most economical way. The methodology characterizes each system design by the cost of the system life cycle and by the system's effectiveness in reaching objectives. Cost is measured by a 'system cost index' derived from an analysis of all expenditures and possible revenues over the system life cycle. Effectiveness is measured by a 'system utility index' obtained by combining the impact that each selection factor has on the system objectives and it is assessed through a 'utility curve'. A preestablished algorithm combines cost and utility and provides a ranking of the alternative system designs from which the 'best' design is selected.

How do high cost-sharing policies for physician care affect inpatient care use and costs among people with chronic disease?

PubMed

Xin, Haichang

2015-01-01

Rapidly rising health care costs continue to be a significant concern in the United States. High cost-sharing strategies thus have been widely used to address rising health care costs. Since high cost-sharing policies can reduce needed care as well as unneeded care use, it raises the concern whether these policies for physician care are a good strategy for controlling costs among chronically ill patients, especially whether utilization and costs in inpatient care will increase in response. This study examined whether high cost sharing in physician care affects inpatient care utilization and costs differently between individuals with and without chronic conditions. Findings from this study will contribute to the insurance benefit design that can control care utilization and save costs of chronically ill individuals. Prior studies suffered from gaps that limit both internal validity and external validity of their findings. This study has its unique contributions by filling these gaps jointly. The study used data from the 2007 Medical Expenditure Panel Survey, a nationally representative sample, with a cross-sectional study design. Instrumental variable technique was used to address the endogeneity between health care utilization and cost-sharing levels. We used negative binomial regression to analyze the count data and generalized linear models for costs data. To account for national survey sampling design, weight and variance were adjusted. The study compared the effects of high cost-sharing policies on inpatient care utilization and costs between individuals with and without chronic conditions to answer the research question. The final study sample consisted of 4523 individuals; among them, 752 had hospitalizations. The multivariate analysis demonstrated consistent patterns. Compared with low cost-sharing policies, high cost-sharing policies for physician care were not associated with a greater increase in inpatient care utilization (P = .86 for chronically ill people and P = .67 for healthy people, respectively) and costs (P = .38 for chronically ill people and P = .68 for healthy people, respectively). The sensitivity analysis with a 10% cost-sharing level also generated consistent insignificant results for both chronically ill and healthy groups. Relative to nonchronically ill individuals, chronically ill individuals may increase their utilization and expenditures of inpatient care to a similar extent in response to increased physician care cost sharing. This may be due to cost pressure from inpatient care and short observation window. Although this study did not find evidence that high cost-sharing policies for physician care increase inpatient care differently for individuals with and without chronic conditions, interpretation of this finding should be cautious. It is possible that in the long run, these sick people would demonstrate substantial demands for medical care and there could be a total cost increase for health plans ultimately. Health plans need to be cautious of policies for chronically ill enrollees.

Turbomachinery design considerations for the nuclear HTGR-GT power plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, C.F.; Smith, M.J.

1979-11-01

For several years, design studies have been under way in the USA on a nuclear closed-cycle gas turbine plant (HTGR-GT). Design aspects of the helium turbomachine portion of these studies are presented. Gas dynamic and mechanical design considerations are presented for helium turbomachines in the 400-MW(e) (non-intercooled) and 600-MW(e) (intercooled) power range. Design of the turbomachine is a key element in the overall power plant program effort, which is currently directed toward the selection of a reference HTGR-GT commercial plant configuration for the US utility market. A conservative design approach has been emphasized to provide maximum safety and durability. Themore » studies presented for the integrated plant concept outline the necessary close working relationship between the reactor primary system and turbomachine designers.« less

Drug Utilization on Neonatal Wards: A Systematic Review of Observational Studies

PubMed Central

Rosli, Rosliana; Dali, Ahmad Fauzi; Abd Aziz, Noorizan; Abdullah, Amir Heberd; Ming, Long Chiau; Manan, Mohamed Mansor

2017-01-01

Despite limited evidence on safety and efficacy of drug use in neonates, drugs are extensively used in this age group. However, the availability of information on drug consumption in neonates, especially inpatient neonates, is limited. This paper systematically reviews published studies on drug utilization in hospitalized neonates. A systematic literature review was carried out to identify observational studies published from inception of databases used till August 2016. Four search engines, namely Medline, CINAHL, Embase, and PubMed, were used. Publications written in English that described drug utilization in neonatal wards were selected. Assessment of the data was based on the category of the study design, the objective of study and the method used in reporting drug consumption. A total of 20 drug utilization studies were identified, 12 of which focused on all drug classes, while the other eight evaluated antimicrobials. Studies were reported in Europe (n = 7), the United States (n = 6), India (n = 5), Brazil (n = 1), and Iran (n = 1). Substantial variance with regard to study types (study design and methods), data source, and sample size were found among the selected studies. Of the studies included, 45% were cross-sectional or retrospective, 40% were prospective studies, and the remaining 15% were point prevalence surveys. More than 70% of the studies were descriptive studies, describing drug consumption patterns. Fifteen per cent of the descriptive studies evaluated changes in drug utilization patterns in neonates. Volume of units was the most prevalent method used for reporting all drug categories. The ATC/DDD system for reporting drug use was only seen in studies evaluating antimicrobials. The most commonly reported drugs across all studies are anti-infectives for systemic use, followed by drugs for the cardiovascular system, the nervous system and the respiratory system. Ampicillin and gentamicin were the most prescribed antimicrobials in hospitalized neonates. The present review reveals that neonates are exposed to a high number of drugs and various methods are used to report drug consumption in this age group. The best measure of drug consumption to quantify prevalence of drug use in neonates remains to be identified and additional research in this area is warranted. PMID:28228724

Comparison of transhumeral socket designs utilizing patient assessment and in vivo skeletal and socket motion tracking: a case study.

PubMed

Resnik, Linda; Patel, Tarpit; Cooney, Shane G; Crisco, Joseph J; Fantini, Christopher

2016-01-01

This case study compares the impact of two prosthetic socket designs, a "traditional" transhumeral (TH) socket design and a Compression Released Stabilized (CRS) socket. A CRS socket was compared to the existing socket of two persons with transhumeral amputation. Comparisons included assessments of patient comfort and satisfaction with fit, as well as dynamic kinematic assessment using a novel high-speed, high-resolution, bi-plane video radiography system (XROMM, for X-ray Reconstruction of Moving Morphology). Subjects were more satisfied with the comfort of the traditional sockets, although they had positive impressions about aspects of the fit and style of the CRS socket, and thought that it provided better control. Dynamic kinematic assessment revealed that the CRS socket provided better control of the residual limb within the socket, and had less slippage as compared to a traditional TH socket design. The TH CRS socket provided better control of the residual limb within the socket, and had less slippage. However, participants were less satisfied with the comfort and overall utility of the CRS socket, and stated that additional fitting visits/modifications to the CRS socket were needed. It is possible that satisfaction with the CRS socket may have improved with prosthetic adjustment and more acclimation time. Implications for Rehabilitation A comfortable, good fitting prosthetic socket is the key factor in determining how long (or if) an upper limb amputee can tolerate wearing a prosthesis. This case series was a comparison of two socket designs, a 'traditional' socket design and a Compression Released Stabilized (CRS) socket design in persons with transhumeral amputation. The CRS socket provided better control of the residual limb within the socket, and had less slippage. However, its tightness made it more difficult to don. Both subjects were less satisfied with the comfort and overall utility of the CRS socket. However, satisfaction might have been improved with additional fitting visits and more acclimation time.

Variable speed gas engine-driven air compressor system

NASA Astrophysics Data System (ADS)

Morgan, J. R.; Ruggles, A. E.; Chen, T. N.; Gehret, J.

1992-11-01

Tecogen Inc. and Ingersoll-Rand Co. as a subcontractor have designed a nominal 150-hp gas engine-driven air compressor utilizing the TECODRIVE 8000 engine and the Ingersoll-Rand 178.5-mm twin screw compressor. Phase 1 included the system engineering and design, economic and applications studies, and a draft commercialization plan. Phase 2 included controls development, laboratory prototype construction, and performance testing. The testing conducted verified that the compressor meets all design specifications.

Battery energy storage market feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kraft, S.; Akhil, A.

1997-07-01

Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as amore » means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).« less

Dedicated operating room for emergency surgery generates more utilization, less overtime, and less cancellations.

PubMed

van Veen-Berkx, Elizabeth; Elkhuizen, Sylvia G; Kuijper, Bart; Kazemier, Geert

2016-01-01

Two approaches prevail for reserving operating room (OR) capacity for emergency surgery: (1) dedicated emergency ORs and (2) evenly allocating capacity to all elective ORs, thereby creating a virtual emergency team. Previous studies contradict which approach leads to the best performance in OR utilization. Quasi-experimental controlled time-series design with empirical data from 3 university medical centers. Four different time periods were compared with analysis of variance with contrasts. Performance was measured based on 467,522 surgical cases. After closing the dedicated emergency OR, utilization slightly increased; overtime also increased. This was in contrast to earlier simulated results. The 2 control centers, maintaining a dedicated emergency OR, showed a higher increase in utilization and a decrease in overtime, along with a smaller ratio of case cancellations because of emergency surgery. This study shows that in daily practice a dedicated emergency OR is the preferred approach in performance terms regarding utilization, overtime, and case cancellations. Copyright © 2016 Elsevier Inc. All rights reserved.

Utility-Marketing Partnerships: An Effective Strategy for Marketing Green Power?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bird, L. A.; Brown, E. S.

This paper explores whether partnerships between utilities and independent marketers are an effective strategy for marketing green power. We present case studies of voluntary and mandatory partnerships covering green power program design and implementation in both regulated and restructured electricity markets. We also include perspectives (based on interviews) from utilities, marketers, and regulators involved in developing and implementing these partnerships. From these case studies and interviews, we describe lessons learned about developing effective partnerships, including such issues as respective roles in marketing and administration, product branding, and contract and incentive structures. Based on experience to date, strategic partnerships between utilitiesmore » and marketers can be an effective approach to marketing green power. Partnerships leverage the sales and resource procurement experience of marketers and the utility?s reputation and access to customers. Further, partnerships can create greater incentives for success because marketers have a vested financial interest in maximizing customer participation and green power sales.« less

Toward an electrical power utility for space exploration

NASA Technical Reports Server (NTRS)

Bercaw, Robert W.

1989-01-01

Plans for space exploration depend on today's technology programs addressing the novel requirements of space-based enterprise. The requirements for electrical power will be formidable: megawatts in magnitude, reliability for multi-year missions and the flexibility to adapt to needs unanticipated at design time. The reasons for considering the power management and distribution in the various systems from a total mission perspective, rather than simply extrapolating current spacecraft design practice, are discussed. A utility approach to electric power being developed at the Lewis Research Center is described. It integrates requirements from a broad selection of current development programs with studies in which both space and terrestrial technologies are conceptually applied to exploration mission scenarios.

Technology Integration (Task 20) Aeroservoelastic Modeling and Design Studies. Part A; Evaluation of Aeroservoelastic Effects on Flutter and Dynamic Gust Response

NASA Technical Reports Server (NTRS)

Nagaraja, K. S.; Kraft, R. H.

1999-01-01

The HSCT Flight Controls Group has developed longitudinal control laws, utilizing PTC aeroelastic flexible models to minimize aeroservoelastic interaction effects, for a number of flight conditions. The control law design process resulted in a higher order controller and utilized a large number of sensors distributed along the body for minimizing the flexibility effects. Processes were developed to implement these higher order control laws for performing the dynamic gust loads and flutter analyses. The processes and its validation were documented in Reference 2, for selected flight condition. The analytical results for additional flight conditions are presented in this document for further validation.

Coal gasifier cogeneration powerplant project

NASA Technical Reports Server (NTRS)

Shure, L. I.; Bloomfield, H. S.

1980-01-01

Industrial cogeneration and utility pr systems were analyzed and a conceptual design study was conducted to evaluate the economic feasibility of a coal gasifier power plant for NASA Lewis Research Center. Site location, plant size, and electric power demand were considered in criteria developed for screening and selecting candidates that could use a wide variety of coals, including that from Ohio. A fluidized bed gasifier concept was chosen as the baseline design and key components of the powerplant were technically assessed. No barriers to environmental acceptability are foreseen. If funded, the powerplant will not only meet the needs of the research center, but will reduce the commercial risk for utilities and industries by fully verifying and demonstrating the technology, thus accelerating commercialization.

ALARA radiation considerations for the AP600 reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lau, F.L.

1995-03-01

The radiation design of the AP600 reactor plant is based on an average annual occupational radiation exposure (ORE) of 100 man-rem. As a design goal we have established a lower value of 70 man-rem per year. And, with our current design process, we expect to achieve annual exposures which are well below this goal. To accomplish our goal we have established a process that provides criteria, guidelines and customer involvement to achieve the desired result. The criteria and guidelines provide the shield designer, as well as the systems and plant layout designers with information that will lead to an integratedmore » plant design that minimizes personnel exposure and yet is not burdened with complicated shielding or unnecessary component access limitations. Customer involvement is provided in the form of utility input, design reviews and information exchange. Cooperative programs with utilities in the development of specific systems or processes also provides for an ALARA design. The results are features which include ALARA radiation considerations as an integral part of the plant design and a lower plant ORE. It is anticipated that a further reduction in plant personnel exposures will result through good radiological practices by the plant operators. The information in place to support and direct the plant designers includes the Utility Requirements Document (URD), Federal Regulations, ALARA guidelines, radiation design information and radiation and shielding design criteria. This information, along with the utility input, design reviews and information feedback, will contribute to the reduction of plant radiation exposure levels such that they will be less than the stated goals.« less

Shape design sensitivity analysis using domain information

NASA Technical Reports Server (NTRS)

Seong, Hwal-Gyeong; Choi, Kyung K.

1985-01-01

A numerical method for obtaining accurate shape design sensitivity information for built-up structures is developed and demonstrated through analysis of examples. The basic character of the finite element method, which gives more accurate domain information than boundary information, is utilized for shape design sensitivity improvement. A domain approach for shape design sensitivity analysis of built-up structures is derived using the material derivative idea of structural mechanics and the adjoint variable method of design sensitivity analysis. Velocity elements and B-spline curves are introduced to alleviate difficulties in generating domain velocity fields. The regularity requirements of the design velocity field are studied.

Optimal Reward Functions in Distributed Reinforcement Learning

NASA Technical Reports Server (NTRS)

Wolpert, David H.; Tumer, Kagan

2000-01-01

We consider the design of multi-agent systems so as to optimize an overall world utility function when (1) those systems lack centralized communication and control, and (2) each agents runs a distinct Reinforcement Learning (RL) algorithm. A crucial issue in such design problems is to initialize/update each agent's private utility function, so as to induce best possible world utility. Traditional 'team game' solutions to this problem sidestep this issue and simply assign to each agent the world utility as its private utility function. In previous work we used the 'Collective Intelligence' framework to derive a better choice of private utility functions, one that results in world utility performance up to orders of magnitude superior to that ensuing from use of the team game utility. In this paper we extend these results. We derive the general class of private utility functions that both are easy for the individual agents to learn and that, if learned well, result in high world utility. We demonstrate experimentally that using these new utility functions can result in significantly improved performance over that of our previously proposed utility, over and above that previous utility's superiority to the conventional team game utility.

Alterations in Skeletal Muscle With Disuse Atrophy: The Effects of Countermeasures

NASA Technical Reports Server (NTRS)

Fitts, Robert H.

1996-01-01

The specific aims of this project concerned three general areas: (1) studies on the contractile function of single skinned fibers designed to determine the time course and cellular basis of the Hindlimb Suspension (HS) induced increase in fiber Vo (maximal shortening velocity), and the decrease in peak tension (Po); (2) studies designed to understand the effect of HS on single fiber substrate utilization during contractile activity, and how if at all such changes contribute to the increased muscle fatigue associated with HS; and (3) studies evaluating the effectiveness of standing and ladder climbing as countermeasures to the deleterious effects of HS. We have constructed all of the necessary equipment, and are currently conducting preliminary studies on T-tubular charge movement. A list of publications from this contract is included at the end of this report. The three objectives are (1) Functional Studies on the Single Skinned Fiber; (2) Fiber Substrate Utilization and Muscle Fatugue with Contracting Activity and (3) Exercise Countermeasures.

Geostationary platform study: Advanced ESGP/evolutionary SSF accommodation study

NASA Technical Reports Server (NTRS)

1990-01-01

The implications on the evolutionary space station of accommodating geosynchronous Earth Orbit (GEO) facilities including unmanned satellites and platforms, manned elements, and transportation and servicing vehicles/elements. The latest existing definitions of typical unmanned GEO facilities and transportation and servicing vehicles/elements are utilized. The physical design, functional design, and operations implications at the space station are determined. Various concepts of the space station from past studies are utilized ranging from the IOC Multifunction Space Station to a branched transportation node space station, and the implications of the accommodation the GEO infrastructure of each type are assessed. Where possible, parametric data are provided to show the implications of variations in sizes and quantities of elements, launch rates, crew sizes, etc. The use of advanced automation, robotics equipment, and an efficient mix of manned/automated support for accomplishing necessary activities at the space station are identified and assessed. The products of this study are configuration sketches, resource requirements, trade studies, and parametric data.

Toxic release consequence analysis tool (TORCAT) for inherently safer design plant.

PubMed

Shariff, Azmi Mohd; Zaini, Dzulkarnain

2010-10-15

Many major accidents due to toxic release in the past have caused many fatalities such as the tragedy of MIC release in Bhopal, India (1984). One of the approaches is to use inherently safer design technique that utilizes inherent safety principle to eliminate or minimize accidents rather than to control the hazard. This technique is best implemented in preliminary design stage where the consequence of toxic release can be evaluated and necessary design improvements can be implemented to eliminate or minimize the accidents to as low as reasonably practicable (ALARP) without resorting to costly protective system. However, currently there is no commercial tool available that has such capability. This paper reports on the preliminary findings on the development of a prototype tool for consequence analysis and design improvement via inherent safety principle by utilizing an integrated process design simulator with toxic release consequence analysis model. The consequence analysis based on the worst-case scenarios during process flowsheeting stage were conducted as case studies. The preliminary finding shows that toxic release consequences analysis tool (TORCAT) has capability to eliminate or minimize the potential toxic release accidents by adopting the inherent safety principle early in preliminary design stage. 2010 Elsevier B.V. All rights reserved.

Evaluation of Embedded System Component Utilized in Delivery Integrated Design Project Course

NASA Astrophysics Data System (ADS)

Junid, Syed Abdul Mutalib Al; Hussaini, Yusnira; Nazmie Osman, Fairul; Razak, Abdul Hadi Abdul; Idros, Mohd Faizul Md; Karimi Halim, Abdul

2018-03-01

This paper reports the evaluation of the embedded system component utilized in delivering the integrated electronic engineering design project course. The evaluation is conducted based on the report project submitted as to fulfil the assessment criteria for the integrated electronic engineering design project course named; engineering system design. Six projects were assessed in this evaluation. The evaluation covers the type of controller, programming language and the number of embedded component utilization as well. From the evaluation, the C-programming based language is the best solution preferred by the students which provide them flexibility in the programming. Moreover, the Analog to Digital converter is intensively used in the projects which include sensors in their proposed design. As a conclusion, in delivering the integrated design project course, the knowledge over the embedded system solution is very important since the high density of the knowledge acquired in accomplishing the project assigned.

Design criteria for the light duty utility arm system end effectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pardini, A.F.; Kiebel, G.R.

1995-12-01

The purpose of this document is to provide criteria for the design of end effectors that will be used as part of the Light Duty Utility Arm (LDUA) System. Actual component design, fabrication, testing, and inspection will be performed by various DOE laboratories, industry, and academia. This document augments WHC-SD-TD-FRD-003, `Functions and Requirements for the Light Duty Utility Arm Integrated System` (F). All requirements dictated in the F shall also be applicable in this document. Whenever conflicts arise between this document and the F, this document shall take precedence.

Method for the Study of Category III Airborne Procedure Reliability

DOT National Transportation Integrated Search

1973-03-01

A method for the study of Category 3 airborne-procedure reliability is presented. The method, based on PERT concepts, is considered to have utility at the outset of a procedure-design cycle and during the early accumulation of actual performance data...

Impact of Truck Loading on Design and Analysis of Asphaltic Pavement Structures : Phase III

DOT National Transportation Integrated Search

2012-03-01

This study investigated the impact of the realistic constitutive material behavior of asphalt layer (both nonlinear inelastic : and fracture) for the prediction of pavement performance. To this end, this study utilized a cohesive zone model to consid...

Effects of lithium carbonate on performance and biomedical functions.

DOT National Transportation Integrated Search

1977-07-01

The effects of a single 600-mg dose of lithium carbonate were evaluated in a study of 15 healthy, normal male subjects. Subjects were studied, on two occasions, by utilizing a double-blind design--once receiving the lithium carbonate and once receivi...

Case-Cohort Studies: Design and Applicability to Hand Surgery.

PubMed

Vojvodic, Miliana; Shafarenko, Mark; McCabe, Steven J

2018-04-24

Observational studies are common research strategies in hand surgery. The case-cohort design offers an efficient and resource-friendly method for risk assessment and outcomes analysis. Case-cohorts remain underrepresented in upper extremity research despite several practical and economic advantages over case-control studies. This report outlines the purpose, utility, and structure of the case-cohort design and offers a sample research question to demonstrate its value to risk estimation for adverse surgical outcomes. The application of well-designed case-cohort studies is advocated in an effort to improve the quality and quantity of observational research evidence in hand and upper extremity surgery. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

43 CFR 2802.11 - How does BLM designate corridors?

Code of Federal Regulations, 2014 CFR

2014-10-01

... activities located within the proposed right-of-way corridor; (7) Social and economic impacts of the right-of...) Transportation and utility corridor studies previously developed by user groups; and (9) Engineering and...

A non-stationary cost-benefit based bivariate extreme flood estimation approach

NASA Astrophysics Data System (ADS)

Qi, Wei; Liu, Junguo

2018-02-01

Cost-benefit analysis and flood frequency analysis have been integrated into a comprehensive framework to estimate cost effective design values. However, previous cost-benefit based extreme flood estimation is based on stationary assumptions and analyze dependent flood variables separately. A Non-Stationary Cost-Benefit based bivariate design flood estimation (NSCOBE) approach is developed in this study to investigate influence of non-stationarities in both the dependence of flood variables and the marginal distributions on extreme flood estimation. The dependence is modeled utilizing copula functions. Previous design flood selection criteria are not suitable for NSCOBE since they ignore time changing dependence of flood variables. Therefore, a risk calculation approach is proposed based on non-stationarities in both marginal probability distributions and copula functions. A case study with 54-year observed data is utilized to illustrate the application of NSCOBE. Results show NSCOBE can effectively integrate non-stationarities in both copula functions and marginal distributions into cost-benefit based design flood estimation. It is also found that there is a trade-off between maximum probability of exceedance calculated from copula functions and marginal distributions. This study for the first time provides a new approach towards a better understanding of influence of non-stationarities in both copula functions and marginal distributions on extreme flood estimation, and could be beneficial to cost-benefit based non-stationary bivariate design flood estimation across the world.

Impacts of proposed RCRA regulations and other related federal environmental regulations on fossil fuel-fired facilities: Final report, Volume 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-03-01

Estimation of the costs associated with implementation of the Resource Conservation and Recovery Act (RCRA) regulations for non-hazardous and hazardous material disposal in the utility industry are provided. These costs are based on engineering studies at a number of coal-fired power plants in which the costs for hazardous and non-hazardous disposal are compared to the costs developed for the current practice design for each utility. The relationship of the three costs is displayed. The emphasis of this study is on the determination of incremental costs rather than the absolute costs for each case (current practice, non-hazardous, or hazardous). For themore » purpose of this project, the hazardous design cost was determined for both minimum and maximum compliance.« less

Geostationary earth climate sensor: Scientific utility and feasibility, phase A

NASA Technical Reports Server (NTRS)

Campbell, G. Garrett; Vonderharr, T. H.; Evert, T.; Kidder, Stanley Q.; Purdom, James F. W.

1991-01-01

The possibility of accurate broad band radiation budget measurements from a GEO platform will provide a unique opportunity for viewing radiation processes in the atmosphere-ocean system. The CSU/TRW team has prepared a Phase 1 instrument design study demonstrating that measurements of radiation budget are practical from geosynchronous orbit with proven technology. This instrument concept is the Geostationary Earth Climate Sensor (GECS). A range of resolutions down to 20 km at the top of the atmosphere are possible, depending upon the scientific goals of the experiment. These tradeoffs of resolution and measurement repeat cycles are examined for scientific utility. The design of a flexible instrument is shown to be possible to meet the two goals: long-term, systematic monitoring of the diurnal cycles of radiation budget; and high time and space resolution studies of regional radiation features.

Flight prototype CO2 and humidity control system

NASA Technical Reports Server (NTRS)

Rudy, K. M.

1977-01-01

A regenerable CO2 and humidity control system is presently being developed for potential use on the space shuttle as an alternative to the baseline lithium hydroxide system. The system utilizes a sorbent material (designated HS-C) to adsorb CO2 and water vapor from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum. Continuous operation is achieved by utilizing two beds which are alternately cycled between adsorption and desorption. A shuttle vehicle integration study showed that the HS-C system offers substantial weight advantages compared to the baseline shuttle orbiter expendable lithium hydroxide CO2 removal system for extended missions beyond the nominal design of four men for seven days. This study defined a system packaging envelope in the area presently occupied by the LiOH cartridges.

Servant Leadership through Distance Learning: A Case Study

ERIC Educational Resources Information Center

Russell, Eric James

2013-01-01

This qualitative study explored the influence a distance learning servant leadership course had on the emergency service students' understanding of leadership. The research study utilized a case study design in order to tell the story of the lived experiences of the participants. The setting for the study was a state university in Utah, with the…

Design of a Fuel Processor System for Generating Hydrogen for Automotive Applications

ERIC Educational Resources Information Center

Kolavennu, Panini K.; Telotte, John C.; Palanki, Srinivas

2006-01-01

The objective of this paper is to design a train of tubular reactors that use a methane feed to produce hydrogen of the desired purity so that it can be utilized by a fuel cell for automotive applications. Reaction engineering principles, which are typically covered at the undergraduate level, are utilized to design this reactor train. It is shown…

Effects of the relative fee structure on the use of surgical operations.

PubMed Central

Escarce, J J

1993-01-01

OBJECTIVE. The goal is to develop a theoretical and empirical framework for investigating how the demand for an operation may be affected by the fee for the operation (the own-price) and by fees for other services provided by surgeons in the same specialty (the cross-price). The theory suggests an empirical test of whether surgeons create demand for surgery. DATA SOURCES AND STUDY SETTING. The study examines the use of 11 frequently performed surgical operations by elderly Medicare enrollees in a cross-section of 316 U.S. metropolitan areas. Medicare physician claims and enrollment files for 1986 are the principal sources of data. STUDY DESIGN. Using econometric methods, a structural demand equation modified to include the own-price and the cross-price is estimated for each study operation. PRINCIPAL FINDINGS. The theory suggests that the utilization response to changes in fees may differ among operations depending on whether demand creation occurs and on the interplay of distinct own-price and cross-price effects. However, the results of the empirical analyses are inconclusive regarding the most appropriate economic model of surgical utilization. Both neoclassical behavior and demand creation are observed, but technical limitations of the analyses, including the cross-sectional design of the study, preclude definitive inferences. CONCLUSIONS. Despite the lack of definitive empirical results, the study has several implications for future research regarding the effect of changes in fees on surgical utilization. In particular, future studies should consider the roles of distinct own-price and cross-price effects, examine the importance of the supply-demand balance in physician services markets, and assess whether typologies of operations that are based on the strictness of their clinical indications predict the appropriate economic model of utilization. PMID:8407339

The Feasibility of Utilizing Wind Energy in Commercial Buildings With Special Reference to the Kingdom of Bahrain

NASA Astrophysics Data System (ADS)

Abdulrahim Saeed, Saeed

2017-11-01

This article shall investigate the feasibility of utilizing wind energy for commercial buildings with special reference to the Kingdom of Bahrain. Bahrain World Trade Center which was built in 2008, is located in the city of Manama. The fifty-story complex contains identical twin towers that rise over 240 meters in height. The towers are connected by three bridges which hold three turbines each 29 meters long. The three turbines were originally design to provide electric energy required for lighting. The Bahrain World Trade Center was selected as a case study to investigate the feasibility of utilizing wind energy technologies in skyscrapers with special reference to the Kingdom of Bahrain. It is hoped that the findings and conclusion of the study shall be of some value for future utilization of wind energy in the GCC countries and the world at large.

Design and testing of high temperature micro-ORC test stand using Siloxane as working fluid

NASA Astrophysics Data System (ADS)

Turunen-Saaresti, Teemu; Uusitalo, Antti; Honkatukia, Juha

2017-03-01

Organic Rankine Cycle is a mature technology for many applications e.g. biomass power plants, waste heat recovery and geothermal power for larger power capacity. Recently more attention is paid on an ORC utilizing high temperature heat with relatively low power. One of the attractive applications of such ORCs would be utilization of waste heat of exhaust gas of combustion engines in stationary and mobile applications. In this paper, a design procedure of the ORC process is described and discussed. The analysis of the major components of the process, namely the evaporator, recuperator, and turbogenerator is done. Also preliminary experimental results of an ORC process utilizing high temperature exhaust gas heat and using siloxane MDM as a working fluid are presented and discussed. The turbine type utilized in the turbogenerator is a radial inflow turbine and the turbogenerator consists of the turbine, the electric motor and the feed pump. Based on the results, it was identified that the studied system is capable to generate electricity from the waste heat of exhaust gases and it is shown that high molecular weight and high critical temperature fluids as the working fluids can be utilized in high-temperature small-scale ORC applications. 5.1 kW of electric power was generated by the turbogenerator.

Bi-Modal Micro-Cathode Arc Thruster for Cube Satellites

NASA Astrophysics Data System (ADS)

Chiu, Dereck

A new concept design, named the Bi-Modal Micro-Cathode Arc Thruster (BM-muCAT), has been introduced utilizing features from previous generations of muCATs and incorporating a multi-propellant functionality. This arc thruster is a micro-Newton level thruster based off of vacuum arc technology utilizing an enhanced magnetic field. Adjusting the magnetic field allows the thrusters performance to be varied. The goal of this thesis is to present a new generation of micro-cathode arc thrusters utilizing a bi-propellant, nickel and titanium, system. Three experimental procedures were run to test the new designs capabilities. Arc rotation experiment was used as a base experiment to ensure erosion was occurring uniformly along each electrode. Ion utilization efficiency was found, using an ion collector, to be up to 2% with the nickel material and 2.5% with the titanium material. Ion velocities were also studied using a time-of-flight method with an enhanced ion detection system. This system utilizes double electrostatic probes to measure plasma propagation. Ion velocities were measured to be 10km/s and 20km/s for nickel and titanium without a magnetic field. With an applied magnetic field of 0.2T, nickel ion velocities almost doubled to about 17km/s, while titanium ion velocities also increased to about 30km/s.

Reimagining Game Design: Exploring the Design of Constructible Authentic Representations for Science Reasoning

NASA Astrophysics Data System (ADS)

Holbert, Nathan Ryan

Video games have recently become a popular space for educational design due to their interactive and engaging nature and the ubiquity of the gaming experience among youth. Though many researchers argue video games can provide opportunities for learning, educational game design has focused on the classroom rather than the informal settings where games are typically played. Educational games have been moderately successful at achieving learning gains on standardized items, but have failed to show improvements on related but distal problems. In this dissertation I develop and assess a new design principle, called constructible authentic representations for creating informal gaming experiences that players will actively draw on when reasoning in formal and real world contexts. These games provide players with opportunities to engage in meaningful construction with components that integrate relevant concepts to create in-game representations that visually and epistemologically align with related tools and representations utilized in the target domain. In the first phase of the dissertation, I observed children playing popular video games to better understand what in-game representations children attend to and how interactions with these representations contribute to intuitive ideas of encountered STEM content. Results from this study fed into the iterative design of two prototype video games, FormulaT Racing and Particles!, intending to give players useful knowledge resources for reasoning about kinematics and the particulate nature of matter respectively. Designed games encourage players to utilize and refine intuitive ideas about target content through the construction of domain relevant representations. To assess the effectiveness of these designs I conducted two studies of children ages 7-14 playing prototype games in informal settings. An analysis of pre- and post-game clinical interviews, domain specific tasks, and video and logging data of gameplay suggests players developed useful knowledge resources, likely gained and/or refined from experiences in-game, that are employed to solve non-game problems and tasks. Furthermore, players utilized in-game representations as objects-to-think-with when explaining real world phenomena and formal concepts. The results suggest that games designed to include constructible authentic representations can provide players with powerful and useful knowledge resources accessible when thinking and reasoning in a variety of contexts.

Preliminary design trade-offs for a multi-mission stored cryogen cooler

NASA Technical Reports Server (NTRS)

Sherman, A.

1978-01-01

Preliminary design studies were performed for a multi-mission solid cryogen cooler having a wide range of application for both the shuttle sortie and free flyer missions. This multi-mission cooler (MMC) is designed to be utilized with various solid cryogens to meet a wide range of instrument cooling from 10 K (with solid hydrogen) to 90 K. The baseline cooler utilizes two stages of solid cryogen and incorporates an optional, higher temperature third stage which is cooled by either a passive radiator or a thermoelectric cooler. The MMC has an interface which can accommodate a wide variety of instrument configurations. A shrink fit adapter is incorporated which allows a drop-in instrument integration. The baseline design provides cooling of approximately 1 watt over a 60 to 100 K temperature range and about 0.5 watts from 15 to 60 K for a one year lifetime. For low cooling loads and with use of the optional radiator shield, cooling lifetimes as great as 8 years are predicted.

Trajectory Dispersed Vehicle Process for Space Launch System

NASA Technical Reports Server (NTRS)

Statham, Tamara; Thompson, Seth

2017-01-01

The Space Launch System (SLS) vehicle is part of NASA's deep space exploration plans that includes manned missions to Mars. Manufacturing uncertainties in design parameters are key considerations throughout SLS development as they have significant effects on focus parameters such as lift-off-thrust-to-weight, vehicle payload, maximum dynamic pressure, and compression loads. This presentation discusses how the SLS program captures these uncertainties by utilizing a 3 degree of freedom (DOF) process called Trajectory Dispersed (TD) analysis. This analysis biases nominal trajectories to identify extremes in the design parameters for various potential SLS configurations and missions. This process utilizes a Design of Experiments (DOE) and response surface methodologies (RSM) to statistically sample uncertainties, and develop resulting vehicles using a Maximum Likelihood Estimate (MLE) process for targeting uncertainties bias. These vehicles represent various missions and configurations which are used as key inputs into a variety of analyses in the SLS design process, including 6 DOF dispersions, separation clearances, and engine out failure studies.

Evolutionary Design of a Robotic Material Defect Detection System

NASA Technical Reports Server (NTRS)

Ballard, Gary; Howsman, Tom; Craft, Mike; ONeil, Daniel; Steincamp, Jim; Howell, Joe T. (Technical Monitor)

2002-01-01

During the post-flight inspection of SSME engines, several inaccessible regions must be disassembled to inspect for defects such as cracks, scratches, gouges, etc. An improvement to the inspection process would be the design and development of very small robots capable of penetrating these inaccessible regions and detecting the defects. The goal of this research was to utilize an evolutionary design approach for the robotic detection of these types of defects. A simulation and visualization tool was developed prior to receiving the hardware as a development test bed. A small, commercial off-the-shelf (COTS) robot was selected from several candidates as the proof of concept robot. The basic approach to detect the defects was to utilize Cadmium Sulfide (CdS) sensors to detect changes in contrast of an illuminated surface. A neural network, optimally designed utilizing a genetic algorithm, was employed to detect the presence of the defects (cracks). By utilization of the COTS robot and US sensors, the research successfully demonstrated that an evolutionarily designed neural network can detect the presence of surface defects.

The characterization of the antibacterial efficacy of an electrically activated silver ion-based surface system

NASA Astrophysics Data System (ADS)

Shirwaiker, Rohan A.

There have been growing concerns in the global healthcare system about the eradication of pathogens in hospitals and other health-critical environments. The problem has been aggravated by the overuse of antibiotics and antimicrobial agents leading to the emergence of antibiotic-resistant superbugs such as methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE) which are difficult to kill. Lower immunity of sick patients coupled with the escalating concurrent problem of antibiotic-resistant pathogens has resulted in increasing incidences of hospital acquired (nosocomial) infections. There is an immediate need to control the transmission of such infections, primarily in healthcare environments, by creating touch-contact and work surfaces (e.g., door knobs, push plates, countertops) that utilize alternative antibacterial materials like the heavy metal, silver. Recent research has shown that it is silver in its ionic (Ag+ ) and not elemental form that is antibacterial. Thus, silver-based antibacterial surfaces have to release silver ions directly into the pathogenic environment (generally, an aqueous media) in order to be effective. This dissertation presents the study and analysis of a new silver-based surface system that utilizes low intensity direct electric current (LIDC) for generation of silver ions to primarily inhibit indirect contact transmission of infections. The broader objective of this research is to understand the design, and characterization of the electrically activated silver ion-based antibacterial surface system. The specific objectives of this dissertation include: (1) Developing a comprehensive system design, and identifying and studying its critical design parameters and functional mechanisms. (2) Evaluating effects of the critical design parameters on the antibacterial efficacy of the proposed surface system. (3) Developing a response surface model for the surface system performance. These objectives are achieved by formulating the system design, fabricating prototypes with appropriate design parameters, evaluating the prototypes using various physical and electrical characterization techniques, and characterizing the antibacterial efficacy of the prototypes using statistical experiments. The major contributions of this dissertation include: (1) Design of a systems focused approach that quantifies the potential effectiveness of silver ions under various configurations of the surface system design. (2) Development of meso and micro-scale fabrication methodologies for prototype fabrication. (3) Development of microbiological testing protocols utilizing variance reduction techniques to test the antibacterial efficacy of system prototypes. (4) Development of empirical models for the surface system using factorial design of experiments (DOE). Basic results from the research demonstrate significant antibacterial efficacy of the surface system against four dangerous bacteria including Staph aureus, Escherichia coli, Pseudomonas aeruginosa, and Enterococcus faecalis which are together responsible for more than 80% of nosocomial infections. Results of the DOE characterization study indicate the statistically significant contributions of three system parameters -- size of features, electric current, and type of bacteria -- to the antibacterial performance of the system. This dissertation synergistically utilizes knowledge and principles from three broader areas of research -- industrial engineering, materials science and microbiology -- to model, design, fabricate and characterize an electrically activated silver-ion based antibacterial surface system with practical applications in improving human health and healthcare systems. The research is aimed at promoting novel integrative research and development of technologies utilizing antibacterial properties of silver and other heavy metals.

Global Explorers: An Examination of Program Processes and Outcomes

ERIC Educational Resources Information Center

Duerden, Mathew David

2009-01-01

This study utilizes longitudinal, mixed-method data drawn from participants in an environmental education/international immersion program for middle high-school students to study outcomes and processes associated with program participation. Studies of program outcomes and processes are important for better understanding the design and impact of…

Understanding the Epistemological Development of Substance Abusing College Students: A Construct Exploration Study

ERIC Educational Resources Information Center

Miller, Lisa A.

2009-01-01

The purpose of this study was to delve into the epistemological constructs of substance abusing college students and explore whether consistencies with Baxter Magolda's (1992) epistemic constructs were indicated. The study utilized a qualitative, narrative inquiry research design framed by Baxter Magolda's interview outline. Interviews were…

Assessment of School Principals' Reassignment Process

ERIC Educational Resources Information Center

Sezgin-Nartgün, Senay; Ekinci, Serkan

2016-01-01

This study aimed to identify administrators' views related to the assessment of school principals' reassignment in educational organizations. The study utilized qualitative research design and the study group composed of 8 school administrators selected via simple sampling who were employed in the Bolu central district in 2014-2015 academic year.…

Teachers and Seating Arrangements and Assignments: A Qualitative Study

ERIC Educational Resources Information Center

Kinahan, Mary P.

2017-01-01

Seating assignments and arrangements are utilized in every school classroom. This qualitative study explored the perceptions that teachers have on seating assignments and arrangements to gain a better understanding of how they make design considerations which impact their students. The questions that guide this study are: How do elementary…

Environmental factors associated with disordered weight-control behaviours among youth: a systematic review.

PubMed

Wang, Monica L; Peterson, Karen E; McCormick, Marie C; Austin, S Bryn

2014-07-01

Environmental factors may be very important in the development of disordered weight-control behaviours (DWCB) among youth, yet no study to date has conducted a review that synthesizes these findings. The purpose of the present study was to systematically review existing literature on environmental influences on DWCB among youth and to identify conceptual and methodological gaps in the literature. Systematic review. Studies were identified through a systematic search using PubMed, PsycINFO, Google Scholar and secondary references. Inclusion criteria included observational studies published in peer-reviewed journals from 1994 to 2012 that examined environmental exposure(s) associated with DWCB among youth. Ninety-three studies, the majority of which utilized a cross-sectional design (75 %; n 70), were identified. Longitudinal studies' follow-up time ranged from 8 months to 10 years. Parental, peer and media influences have been extensively studied as factors associated with DWCB among youth. Fewer studies have examined behavioural settings (i.e. homes, schools, neighbourhoods) or sectors of influence other than the media on DWCB. No studies utilized multilevel methods to parse out environmental influences on DWCB. Most studies (69 %, n 64) did not explicitly utilize a theory or model to guide the research. Findings indicate that exploring a wider range of environmental influences on DWCB, specifically behavioural settings and sectors of influence, using diverse study samples and multilevel methodology is needed to advance the field and to inform the design of comprehensive prevention programmes that target DWCB and other weight-related behaviours.

The Mind Body-Wellness in Supportive Housing (Mi-WiSH) study: Design and rationale of a cluster randomized controlled trial of Tai Chi in senior housing.

PubMed

Wayne, Peter M; Gagnon, Margaret M; Macklin, Eric A; Travison, Thomas G; Manor, Bradley; Lachman, Margie; Thomas, Cindy P; Lipsitz, Lewis A

2017-09-01

Supporting the health of growing numbers of frail older adults living in subsidized housing requires interventions that can combat frailty, improve residents' functional abilities, and reduce their health care costs. Tai Chi is an increasingly popular multimodal mind-body exercise that incorporates physical, cognitive, social, and meditative components in the same activity and offers a promising intervention for ameliorating many of the conditions that lead to poor health and excessive health care utilization. The Mind Body-Wellness in Supportive Housing (Mi-WiSH) study is an ongoing two-arm cluster randomized, attention-controlled trial designed to examine the impact of Tai Chi on functional indicators of health and health care utilization. We are enrolling participants from 16 urban subsidized housing facilities (n=320 participants), conducting the Tai Chi intervention or education classes and social calls (attention control) in consenting subjects within the facilities for one year, and assessing these subjects at baseline, 6months, and 1year. Physical function (quantified by the Short Physical Performance Battery), and health care utilization (emergency visits, hospitalizations, skilled nursing and nursing home admissions), assessed at 12months are co-primary outcomes. Our discussion highlights our strategy to balance pragmatic and explanatory features into the study design, describes efforts to enhance site recruitment and participant adherence, and summarizes our broader goal of post study dissemination if effectiveness and cost-effectiveness are demonstrated, by preparing training and protocol manuals for use in housing facilities across the U.S. Copyright © 2017 Elsevier Inc. All rights reserved.

Sorption of water alkalinity and hardness from high-strength wastewater on bifunctional activated carbon: process optimization, kinetics and equilibrium studies.

PubMed

Amosa, Mutiu K

2016-08-01

Sorption optimization and mechanism of hardness and alkalinity on bifunctional empty fruit bunch-based powdered activation carbon (PAC) were studied. The PAC possessed both high surface area and ion-exchange properties, and it was utilized in the treatment of biotreated palm oil mill effluent. Batch adsorption experiments designed with Design Expert(®) were conducted in correlating the singular and interactive effects of the three adsorption parameters: PAC dosage, agitation speed and contact time. The sorption trends of the two contaminants were sequentially assessed through a full factorial design with three factor interaction models and a central composite design with polynomial models of quadratic order. Analysis of variance revealed the significant factors on each design response with very high R(2) values indicating good agreement between model and experimental values. The optimum operating conditions of the two contaminants differed due to their different regions of operating interests, thus necessitating the utility of desirability factor to get consolidated optimum operation conditions. The equilibrium data for alkalinity and hardness sorption were better represented by the Langmuir isotherm, while the pseudo-second-order kinetic model described the adsorption rates and behavior better. It was concluded that chemisorption contributed majorly to the adsorption process.

Brainstorming Design for Health: Helping Patients Utilize Patient-Generated Information on the Web

PubMed Central

Huh, Jina; Hartzler, Andrea; Munson, Sean; Anderson, Nick; Edwards, Kelly; Gore, John L.; McDonald, David; O’Leary, Jim; Parker, Andrea; Streat, Derek; Yetisgen-Yildiz, Meliha; Pratt, Wanda; Ackerman, Mark S.

2013-01-01

Researchers and practitioners show increasing sinterest in utilizing patient-generated information on the Web. Although the HCI and CSCW communities have provided many exciting opportunities for exploring new ideas and building broad agenda in health, few venues offer a platform for interdisciplinary and collaborative brainstorming about design challenges and opportunities in this space. The goal of this workshop is to provide participants with opportunities to interact with stakeholders from diverse backgrounds and practices—researchers, practitioners, designers, programmers, and ethnographers—and together generate tangible design outcomes that utilize patient-generated information on the Web. Through small multidisciplinary group work, we will provide participants with new collaboration opportunities, understanding of the state of the art, inspiration for future work, and ideally avenues for continuing to develop research and design ideas generated at the workshop. PMID:24499843

Design of a Fission 99 Mo Recovery Process and Implications toward Mo Adsorption Mechanism on Titania and Alumina Sorbents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stepinski, Dominique C.; Youker, Amanda J.; Krahn, Elizabeth O.

2017-03-01

Molybdenum-99 is a parent of the most widely used medical isotope technetium-99m. Proliferation concerns have prompted development of alternative Mo production methods utilizing low enriched uranium. Alumina and titania sorbents were evaluated for separation of Mo from concentrated uranyl nitrate solutions. System, mass transfer, and isotherm parameters were determined to enable design of Mo separation processes under a wide range of conditions. A model-based approach was utilized to design representative commercial-scale column processes. The designs and parameters were verified with bench-scale experiments. The results are essential for design of Mo separation processes from irradiated uranium solutions, selection of support materialmore » and process optimization. Mo uptake studies show that adsorption decreases with increasing concentration of uranyl nitrate; howeveL, examination of Mo adsorption as a function of nitrate ion concentration shows no dependency, indicating that uranium competes with Mo for adsorption sites. These results are consistent with reports indicating that Mo forms inner-sphere complexes with titania and alumina surface groups.« less

Energy conservation through optimum utilization of site energy sources for all season thermal comfort in new residential construction for single family attached (rowhouse/townhouse) designs

NASA Astrophysics Data System (ADS)

Gerber, S.; Holsman, J. P.

1981-02-01

A proposed design analysis is presented of a passive solar energy efficient system for a typical three level, three bedroom, two story, garage under townhouse. The design incorporates the best, most performance proven and cost effective products, materials, processes, technologies, and subsystems which are available today. Seven distinct categories recognized for analysis are identified as: the exterior environment; the interior environment; conservation of energy; natural energy utilization; auxiliary energy utilization; control and distribution systems; and occupant adaptation. Preliminary design features, fenestration systems, the plenum supply system, the thermal storage party fire walls, direct gain storage, the radiant comfort system, and direct passive cooling systems are briefly described.

Fusion reactor blanket/shield design study

NASA Astrophysics Data System (ADS)

Smith, D. L.; Clemmer, R. G.; Harkness, S. D.; Jung, J.; Krazinski, J. L.; Mattas, R. F.; Stevens, H. C.; Youngdahl, C. K.; Trachsel, C.; Bowers, D.

1979-07-01

A joint study of Tokamak reactor first wall/blanket/shield technology was conducted to identify key technological limitations for various tritium breeding blanket design concepts, establishment of a basis for assessment and comparison of the design features of each concept, and development of optimized blanket designs. The approach used involved a review of previously proposed blanket designs, analysis of critical technological problems and design features associated with each of the blanket concepts, and a detailed evaluation of the most tractable design concepts. Tritium breeding blanket concepts were evaluated according to the proposed coolant. The effort concentrated on evaluation of lithium and water cooled blanket designs and helium and molten salt cooled designs. Generalized nuclear analysis of the tritium breeding performance, an analysis of tritium breeding requirements, and a first wall stress analysis were conducted as part of the study. The impact of coolant selection on the mechanical design of a Tokamak reactor was evaluated. Reference blanket designs utilizing the four candidate coolants are presented.

Thermal energy storage heat exchanger: Molten salt heat exchanger design for utility power plants

NASA Technical Reports Server (NTRS)

Ferarra, A.; Yenetchi, G.; Haslett, R.; Kosson, R.

1977-01-01

The use of thermal energy storage (TES) in the latent heat of molten salts as a means of conserving fossil fuels and lowering the cost of electric power was evaluated. Public utility systems provided electric power on demand. This demand is generally maximum during late weekday afternoons, with considerably lower overnight and weekend loads. Typically, the average demand is only 60% to 80% of peak load. As peak load increases, the present practice is to purchase power from other grid facilities or to bring older less efficient fossil-fuel plants on line which increase the cost of electric power. The widespread use of oil-fired boilers, gas turbine and diesel equipment to meet peaking loads depletes our oil-based energy resources. Heat exchangers utilizing molten salts can be used to level the energy consumption curve. The study begins with a demand analysis and the consideration of several existing modern fossil-fuel and nuclear power plants for use as models. Salts are evaluated for thermodynamic, economic, corrosive, and safety characteristics. Heat exchanger concepts are explored and heat exchanger designs are conceived. Finally, the economics of TES conversions in existing plants and new construction is analyzed. The study concluded that TES is feasible in electric power generation. Substantial data are presented for TES design, and reference material for further investigation of techniques is included.

Propulsion integration of hypersonic air-breathing vehicles utilizing a top-down design methodology

NASA Astrophysics Data System (ADS)

Kirkpatrick, Brad Kenneth

In recent years, a focus of aerospace engineering design has been the development of advanced design methodologies and frameworks to account for increasingly complex and integrated vehicles. Techniques such as parametric modeling, global vehicle analyses, and interdisciplinary data sharing have been employed in an attempt to improve the design process. The purpose of this study is to introduce a new approach to integrated vehicle design known as the top-down design methodology. In the top-down design methodology, the main idea is to relate design changes on the vehicle system and sub-system level to a set of over-arching performance and customer requirements. Rather than focusing on the performance of an individual system, the system is analyzed in terms of the net effect it has on the overall vehicle and other vehicle systems. This detailed level of analysis can only be accomplished through the use of high fidelity computational tools such as Computational Fluid Dynamics (CFD) or Finite Element Analysis (FEA). The utility of the top-down design methodology is investigated through its application to the conceptual and preliminary design of a long-range hypersonic air-breathing vehicle for a hypothetical next generation hypersonic vehicle (NHRV) program. System-level design is demonstrated through the development of the nozzle section of the propulsion system. From this demonstration of the methodology, conclusions are made about the benefits, drawbacks, and cost of using the methodology.

Experimental Effects of Word Generation on Vocabulary, Academic Language, and Perspective Taking in High Poverty Middle Schools

ERIC Educational Resources Information Center

Jones, Stephanie M.; Kim, James; LaRusso, Maria; Kim, Ha Yeon; Selman, Robert; Uccelli, Paola; Barnes, Sophie; Donovan, Suzanne; Snow, Catherine

2016-01-01

Word Generation (WG) is a research-based vocabulary program for middle school students designed to teach words through language arts, math, science, and social studies classes. The program consists of weekly units that introduce 5 high-utility target words through brief passages designed to spark active examination and discussion of contemporary…

Student Achievement in High Performing, Suburban Middle Schools and Low Performing, Urban Middle Schools: Plausible Explanations for the Differences

ERIC Educational Resources Information Center

Brown, Kathleen M.; Anfara, Vincent A., Jr.; Roney, Kathleen

2004-01-01

Utilizing a qualitative, multisite case study design and the theoretical framework of Hoy and Hannum (1997), the design and execution of this research investigates plausible explanations for the difference in student achievement between high performing (HPS) suburban middle schools and low performing (LPS) urban middle schools. Aside from the…

Design, economic and system considerations of large wind-driven generators

NASA Technical Reports Server (NTRS)

Jorgensen, G. E.; Lotker, M.; Meier, R. C.; Brierley, D.

1976-01-01

The increased search for alternative energy sources has lead to renewed interest and studies of large wind-driven generators. This paper presents the results and considerations of such an investigation. The paper emphasizes the concept selection of wind-driven generators, system optimization, control system design, safety aspects, economic viability on electric utility systems and potential electric system interfacing problems.

Design and Development of Rubrics to Improve Assessment Outcomes: A Pilot Study in a Master's Level Business Program in India

ERIC Educational Resources Information Center

Reddy, Malini Y.

2011-01-01

Purpose: This paper seeks to discuss the characteristics that describe a rubric. It aims to propose a systematic method for developing curriculum wide rubrics and to discuss their potential utility for program quality assessment. Design/methodology/approach: Implementation of rubrics is a recent phenomenon in higher education. Prior research and…

Key Design Considerations When Calculating Cost Savings for Population Health Management Programs in an Observational Setting.

PubMed

Murphy, Shannon M E; Hough, Douglas E; Sylvia, Martha L; Dunbar, Linda J; Frick, Kevin D

2018-02-08

To illustrate the impact of key quasi-experimental design elements on cost savings measurement for population health management (PHM) programs. Population health management program records and Medicaid claims and enrollment data from December 2011 through March 2016. The study uses a difference-in-difference design to compare changes in cost and utilization outcomes between program participants and propensity score-matched nonparticipants. Comparisons of measured savings are made based on (1) stable versus dynamic population enrollment and (2) all eligible versus enrolled-only participant definitions. Options for the operationalization of time are also discussed. Individual-level Medicaid administrative and claims data and PHM program records are used to match study groups on baseline risk factors and assess changes in costs and utilization. Savings estimates are statistically similar but smaller in magnitude when eliminating variability based on duration of population enrollment and when evaluating program impact on the entire target population. Measurement in calendar time, when possible, simplifies interpretability. Program evaluation design elements, including population stability and participant definitions, can influence the estimated magnitude of program savings for the payer and should be considered carefully. Time specifications can also affect interpretability and usefulness. © Health Research and Educational Trust.

Cogeneration deferral rate and preemption under PURPA: a legal note

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spiewak, S.

The Public Utility Regulatory Policies Act (PURPA) is designed to benefit the ratepayer by using utility facilities as efficiently as possible. It does not ask states to encourage cogeneration or small power projects at the expense of utility efficiency. A legal analysis of the wording of PURPA shows that a deferral rate designed to retain customers who would otherwise turn to cogeneration or independent power supplies is legally consistent with PURPA's intent.

Methodological quality of behavioural weight loss studies: a systematic review

PubMed Central

Lemon, S. C.; Wang, M. L.; Haughton, C. F.; Estabrook, D. P.; Frisard, C. F.; Pagoto, S. L.

2018-01-01

Summary This systematic review assessed the methodological quality of behavioural weight loss intervention studies conducted among adults and associations between quality and statistically significant weight loss outcome, strength of intervention effectiveness and sample size. Searches for trials published between January, 2009 and December, 2014 were conducted using PUBMED, MEDLINE and PSYCINFO and identified ninety studies. Methodological quality indicators included study design, anthropometric measurement approach, sample size calculations, intent-to-treat (ITT) analysis, loss to follow-up rate, missing data strategy, sampling strategy, report of treatment receipt and report of intervention fidelity (mean = 6.3). Indicators most commonly utilized included randomized design (100%), objectively measured anthropometrics (96.7%), ITT analysis (86.7%) and reporting treatment adherence (76.7%). Most studies (62.2%) had a follow-up rate >75% and reported a loss to follow-up analytic strategy or minimal missing data (69.9%). Describing intervention fidelity (34.4%) and sampling from a known population (41.1%) were least common. Methodological quality was not associated with reporting a statistically significant result, effect size or sample size. This review found the published literature of behavioural weight loss trials to be of high quality for specific indicators, including study design and measurement. Identified for improvement include utilization of more rigorous statistical approaches to loss to follow up and better fidelity reporting. PMID:27071775

Pressure control and analysis report: Hydrogen Thermal Test Article (HTTA)

NASA Technical Reports Server (NTRS)

1971-01-01

Tasks accomplished during the HTTA Program study period included: (1) performance of a literature review to provide system guidelines; (2) development of analytical procedures needed to predict system performance; (3) design and analysis of the HTTA pressurization system considering (a) future utilization of results in the design of a spacecraft maneuvering system propellant package, (b) ease of control and operation, (c) system safety, and (d) hardware cost; and (4) making conclusions and recommendations for systems design.

Modeling of Atmospheric Turbulence as Disturbances for Control Design and Evaluation of High Speed Propulsion Systems

NASA Technical Reports Server (NTRS)

Kopasakis, George

2010-01-01

Atmospheric turbulence models are necessary for the design of both inlet/engine and flight controls, as well as for studying integrated couplings between the propulsion and the vehicle structural dynamics for supersonic vehicles. Models based on the Kolmogorov spectrum have been previously utilized to model atmospheric turbulence. In this paper, a more accurate model is developed in its representative fractional order form, typical of atmospheric disturbances. This is accomplished by first scaling the Kolmogorov spectral to convert them into finite energy von Karman forms. Then a generalized formulation is developed in frequency domain for these scale models that approximates the fractional order with the products of first order transfer functions. Given the parameters describing the conditions of atmospheric disturbances and utilizing the derived formulations, the objective is to directly compute the transfer functions that describe these disturbances for acoustic velocity, temperature, pressure and density. Utilizing these computed transfer functions and choosing the disturbance frequencies of interest, time domain simulations of these representative atmospheric turbulences can be developed. These disturbance representations are then used to first develop considerations for disturbance rejection specifications for the design of the propulsion control system, and then to evaluate the closed-loop performance.

An assessment of schoolyard features and behavior patterns in children's utilization and physical activity.

PubMed

Anthamatten, Peter; Brink, Lois; Kingston, Beverly; Kutchman, Eve; Lampe, Sarah; Nigg, Claudio

2014-03-01

Careful research that elucidates how behavior relates to design in the context of elementary school grounds can serve to guide cost-efficient design with the goal of encouraging physical activity (PA). This work explores patterns in children's PA behavior within playground spaces with the specific goal of guiding healthy playground design. Data on children's utilization and PA behavior in 6 playgrounds divided into 106 observation zones were collected in 2005 and 2006 at Denver elementary school playgrounds using the System for Observing Play and Leisure Activity in Youth. Analyses of variance and t tests determined whether there were differences in utilization and behavior patterns across observations zones and between genders. This study provides evidence that children prefer to use certain types of playground zones and that they are more likely to practice moderate-to-vigorous physical activity (MVPA) in some zones. The authors observed statistically significant differences between genders. Boys were more likely to engage in MVPA in zones without equipment, girls were more likely to use zones with equipment. This work suggests that the inclusion or omission of specific playground features may have an impact on the way that children use the spaces.

Earth Observatory Satellite system definition study. Report no. 6: Space shuttle interfaces/utilization

NASA Technical Reports Server (NTRS)

1974-01-01

The impacts of achieving compatibility of the Earth Observatory Satellite (EOS) with the space shuttle and the potential benefits of space shuttle utilization are discussed. Mission requirements and mission suitability, including the effects of multiple spacecraft missions, are addressed for the full spectrum of the missions. Design impact is assessed primarily against Mission B, but unique requirements reflected by Mission A, B, and C are addressed. The preliminary results indicated that the resupply mission had the most pronounced impact on spacecraft design and cost. Program costs are developed for the design changes necessary to achieve EOS-B compatibility with Space Shuttle operations. Non-recurring and recurring unit costs are determined, including development, test, ground support and logistics, and integration efforts. Mission suitability is addressed in terms of performance, volume, and center of gravity compatibility with both space shuttle and conventional launch vehicle capabilities.

Application of dual-fuel propulsion to a single stage AMLS vehicle

NASA Technical Reports Server (NTRS)

Lepsch, Roger A., Jr.; Stanley, Douglas O.; Unal, Resit

1993-01-01

As part of NASA's Advanced Manned Launch System (AMLS) study to determine a follow-on, or complement, to the Space Shuttle, a reusable single-stage-to-orbit concept utilizing dual-fuel rocket propulsion has been examined. Several dual-fuel propulsion concepts were investigated. These include: a separate engine concept combining Russian RD-170 kerosene-fueled engines with SSME-derivative engines; the kerosene and hydrogen-fueled Russian RD-701 engine concept; and a dual-fuel, dual-expander engine concept. Analysis to determine vehicle weight and size characteristics was performed using conceptual level design techniques. A response surface methodology for multidisciplinary design was utilized to optimize the dual-fuel vehicle concepts with respect to several important propulsion system and vehicle design parameters in order to achieve minimum empty weight. Comparisons were then made with a hydrogen-fueled reference, single-stage vehicle. The tools and methods employed in the analysis process are also summarized.

Designing learning management system interoperability in semantic web

NASA Astrophysics Data System (ADS)

Anistyasari, Y.; Sarno, R.; Rochmawati, N.

2018-01-01

The extensive adoption of learning management system (LMS) has set the focus on the interoperability requirement. Interoperability is the ability of different computer systems, applications or services to communicate, share and exchange data, information, and knowledge in a precise, effective and consistent way. Semantic web technology and the use of ontologies are able to provide the required computational semantics and interoperability for the automation of tasks in LMS. The purpose of this study is to design learning management system interoperability in the semantic web which currently has not been investigated deeply. Moodle is utilized to design the interoperability. Several database tables of Moodle are enhanced and some features are added. The semantic web interoperability is provided by exploited ontology in content materials. The ontology is further utilized as a searching tool to match user’s queries and available courses. It is concluded that LMS interoperability in Semantic Web is possible to be performed.

The General Electric MOD-1 wind turbine generator program

NASA Technical Reports Server (NTRS)

Poor, R. H.; Hobbs, R. B.

1979-01-01

The design, fabrication, installation and checkout of MOD-1, a megawatt class wind turbine generator which generates utility grade electrical power, is described. A MOD-1/MOD-1A tradeoff study is discussed.

Optimal experimental designs for the estimation of thermal properties of composite materials

NASA Technical Reports Server (NTRS)

Scott, Elaine P.; Moncman, Deborah A.

1994-01-01

Reliable estimation of thermal properties is extremely important in the utilization of new advanced materials, such as composite materials. The accuracy of these estimates can be increased if the experiments are designed carefully. The objectives of this study are to design optimal experiments to be used in the prediction of these thermal properties and to then utilize these designs in the development of an estimation procedure to determine the effective thermal properties (thermal conductivity and volumetric heat capacity). The experiments were optimized by choosing experimental parameters that maximize the temperature derivatives with respect to all of the unknown thermal properties. This procedure has the effect of minimizing the confidence intervals of the resulting thermal property estimates. Both one-dimensional and two-dimensional experimental designs were optimized. A heat flux boundary condition is required in both analyses for the simultaneous estimation of the thermal properties. For the one-dimensional experiment, the parameters optimized were the heating time of the applied heat flux, the temperature sensor location, and the experimental time. In addition to these parameters, the optimal location of the heat flux was also determined for the two-dimensional experiments. Utilizing the optimal one-dimensional experiment, the effective thermal conductivity perpendicular to the fibers and the effective volumetric heat capacity were then estimated for an IM7-Bismaleimide composite material. The estimation procedure used is based on the minimization of a least squares function which incorporates both calculated and measured temperatures and allows for the parameters to be estimated simultaneously.

Pedagogical perspectives and implicit theories of teaching: First year science teachers emerging from a constructivist science education program

NASA Astrophysics Data System (ADS)

Dias, Michael James

Traditional, teacher-centered pedagogies dominate current teaching practice in science education despite numerous research-based assertions that promote more progressive, student-centered teaching methods. Best-practice research emerging from science education reform efforts promotes experiential, collaborative learning environments in line with the constructivist referent. Thus there is a need to identify specific teacher education program designs that will promote the utilization of constructivist theory among new teachers. This study explored the learning-to-teach process of four first-year high school teachers, all graduates of a constructivist-based science education program known as Teacher Education Environments in Mathematics and Science (TEEMS). Pedagogical perspectives and implicit theories were explored to identify common themes and their relation to the pre-service program and the teaching context. Qualitative methods were employed to gather and analyze the data. In depth, semi-structured interviews (Seidman, 1998) formed the primary data for probing the context and details of the teachers' experience as well as the personal meaning derived from first year practice. Teacher journals and teaching artifacts were utilized to validate and challenge the primary data. Through an open-coding technique (Strauss & Corbin, 1990) codes, and themes were generated from which assertions were made. The pedagogical perspectives apparent among the participants in this study emerged as six patterns in teaching method: (1) utilization of grouping strategies, (2) utilization of techniques that allow the students to help teach, (3) similar format of daily instructional strategy, (4) utilization of techniques intended to promote engagement, (5) utilization of review strategies, (6) assessment by daily monitoring and traditional tests, (7) restructuring content knowledge. Assertions from implicit theory data include: (1) Time constraints and lack of teaching experience made inquiry teaching difficult to implement for the first year teachers in this study. (2) Commitment to teaching and supportive relationships at the school helped the first year teachers negotiate a satisfying role. (3) A congruence existed between the first-year teachers' implicit theories and the social/experiential design of TEEMS. This congruence represented a narrowing of the gap between educational theory and practice. Implications for science-teacher education highlight the potential for experiential program designs to narrow the gap between educational theory and practice.

Utility-based designs for randomized comparative trials with categorical outcomes

PubMed Central

Murray, Thomas A.; Thall, Peter F.; Yuan, Ying

2016-01-01

A general utility-based testing methodology for design and conduct of randomized comparative clinical trials with categorical outcomes is presented. Numerical utilities of all elementary events are elicited to quantify their desirabilities. These numerical values are used to map the categorical outcome probability vector of each treatment to a mean utility, which is used as a one-dimensional criterion for constructing comparative tests. Bayesian tests are presented, including fixed sample and group sequential procedures, assuming Dirichlet-multinomial models for the priors and likelihoods. Guidelines are provided for establishing priors, eliciting utilities, and specifying hypotheses. Efficient posterior computation is discussed, and algorithms are provided for jointly calibrating test cutoffs and sample size to control overall type I error and achieve specified power. Asymptotic approximations for the power curve are used to initialize the algorithms. The methodology is applied to re-design a completed trial that compared two chemotherapy regimens for chronic lymphocytic leukemia, in which an ordinal efficacy outcome was dichotomized and toxicity was ignored to construct the trial’s design. The Bayesian tests also are illustrated by several types of categorical outcomes arising in common clinical settings. Freely available computer software for implementation is provided. PMID:27189672

Prescription copay reduction program for diabetic employees: impact on medication compliance and healthcare costs and utilization.

PubMed

Nair, Kavita V; Miller, Kerri; Saseen, Joseph; Wolfe, Pamela; Allen, Richard Read; Park, Jinhee

2009-01-01

To examine the impact of a value-based benefit design on utilization and expenditures. This benefit design involved all diabetes-related drugs and testing supplies placed on the lowest copay tier for 1 employer group. The sample of diabetic members were enrolled from a 9-month preperiod and for 2 years after the benefit design was implemented. Measured outcomes included prescription drug utilization for diabetes and medical utilization. Generalized measures were used to estimate differences between years 1 and 2 and the preperiod adjusting for age, gender, and comorbidity risk. Diabetes prescription drug use increased by 9.5% in year 1 and by 5.5% in year 2, and mean adherence increased by 7% to 8% in year 1 and fell slightly in year 2 compared with the preperiod. Pharmacy expenditures increased by 47% and 53% and expenditures for diabetes services increased by 16% and 32% in years 1 and 2, respectively. Increases in adherence and use of diabetes medications were observed. There were no compensatory cost-savings for the employer through lower utilization of medical expenditures in the first 2 years. Adherent patients had fewer emergency department visits than nonadherent patients after the implementation of this benefit design.

Minimum energy, liquid hydrogen supersonic cruise vehicle study

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.

1975-01-01

The potential was examined of hydrogen-fueled supersonic vehicles designed for cruise at Mach 2.7 and at Mach 2.2. The aerodynamic, weight, and propulsion characteristics of a previously established design of a LH2 fueled, Mach 2.7 supersonic cruise vehicle (SCV) were critically reviewed and updated. The design of a Mach 2.2 SCV was established on a corresponding basis. These baseline designs were then studied to determine the potential of minimizing energy expenditure in performing their design mission, and to explore the effect of fuel price and noise restriction on their design and operating performance. The baseline designs of LH2 fueled aircraft were than compared with equivalent designs of jet A (conventional hydrocarbon) fueled SCV's. Use of liquid hydrogen for fuel for the subject aircraft provides significant advantages in performance, cost, noise, pollution, sonic boom, and energy utilization.

Simulation studies of the application of SEASAT data in weather and state of sea forecasting models

NASA Technical Reports Server (NTRS)

Cardone, V. J.; Greenwood, J. A.

1979-01-01

The design and analysis of SEASAT simulation studies in which the error structure of conventional analyses and forecasts is modeled realistically are presented. The development and computer implementation of a global spectral ocean wave model is described. The design of algorithms for the assimilation of theoretical wind data into computers and for the utilization of real wind data and wave height data in a coupled computer system are presented.

Conceptual design study of a visual system for a rotorcraft simulator and some advances in platform motion utilization

NASA Technical Reports Server (NTRS)

Sinacori, J. B.

1980-01-01

A conceptual design of a visual system for a rotorcraft flight simulator is presented. Also, drive logic elements for a coupled motion base for such a simulator are given. The design is the result of an assessment of many potential arrangements of electro-optical elements and is a concept considered feasible for the application. The motion drive elements represent an example logic for a coupled motion base and is essentially an appeal to the designers of such logic to combine their washout and braking functions.

Force decay of elastomeric chains - a mechanical design and product comparison study.

PubMed

Balhoff, David A; Shuldberg, Matthew; Hagan, Joseph L; Ballard, Richard W; Armbruster, Paul C

2011-03-01

To evaluate the percentage force decay of elastomeric chain products utilizing three different design mechanisms simulating canine retraction; and to evaluate the percentage force decay of elastomeric chain products from four different companies. In vitro, laboratory study. LSUHSC Dental School, New Orleans, LA, USA. Closed (non-spaced), grey elastomeric chains from four companies were selected for the study. Three acrylic resin jigs were constructed to provide a framework for three simulated space closure mechanisms. The 6-5-3, the chain loop, and the 6-3 were the configuration mechanisms used in the study. An electronic force gauge was used to measure the percentage force decay associated with each elastomeric chain over 28 days at preselected times. There was a significant difference in the mean percentage force decay for the three different mechanisms (P < 0·001). For all four companies, the 6-3 mechanical design had the smallest mean percentage force decay. There was a significant difference in the mean percentage force decay for the different companies (P < 0·001). For all three mechanisms, Ormco had the smallest percentage force decay while Unitek had the highest percentage force decay. The significant difference in the mean percentage force decay for the different mechanisms suggests that the 6-3 design is a more efficient means of closing extraction spaces utilizing elastomeric chains.

The design of optimal electric power demand management contracts

NASA Astrophysics Data System (ADS)

Fahrioglu, Murat

1999-11-01

Our society derives a quantifiable benefit from electric power. In particular, forced outages or blackouts have enormous consequences on society, one of which is loss of economic surplus. Electric utilities try to provide reliable supply of electric power to their customers. Maximum customer benefit derives from minimum cost and sufficient supply availability. Customers willing to share in "availability risk" can derive further benefit by participating in controlled outage programs. Specifically, whenever utilities foresee dangerous loading patterns, there is a need for a rapid reduction in demand either system-wide or at specific locations. The utility needs to get relief in order to solve its problems quickly and efficiently. This relief can come from customers who agree to curtail their loads upon request in exchange for an incentive fee. This thesis shows how utilities can get efficient load relief while maximizing their economic benefit. This work also shows how estimated customer cost functions can be calibrated, using existing utility data, to help in designing efficient demand management contracts. In order to design such contracts, optimal mechanism design is adopted from "Game Theory" and applied to the interaction between a utility and its customers. The idea behind mechanism design is to design an incentive structure that encourages customers to sign up for the right contract and reveal their true value of power. If a utility has demand management contracts with customers at critical locations, most operational problems can be solved efficiently. This thesis illustrates how locational attributes of customers incorporated into demand management contract design can have a significant impact in solving system problems. This kind of demand management contracts can also be used by an Independent System Operator (ISO). During times of congestion a loss of economic surplus occurs. When the market is too slow or cannot help relieve congestion, demand management can help solve the problem. Another tool the ISO requires for security purposes is reserves. Even though demand management contracts may not be a good substitute for spinning reserves, they are adequate to augment or replace supplemental and backup reserves.

Battery energy storage market feasibility study -- Expanded report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kraft, S.; Akhil, A.

1997-09-01

Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and asmore » a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).« less

Study protocol of cost-effectiveness and cost-utility of a biopsychosocial multidisciplinary intervention in the evolution of non-specific sub-acute low back pain in the working population: cluster randomised trial

PubMed Central

2011-01-01

Background Low back pain (LBP), with high incidence and prevalence rate, is one of the most common reasons to consult the health system and is responsible for a significant amount of sick leave, leading to high health and social costs. The objective of the study is to assess the cost-effectiveness and cost-utility analysis of a multidisciplinary biopsychosocial educational group intervention (MBEGI) of non-specific sub-acute LBP in comparison with the usual care in the working population recruited in primary healthcare centres. Methods/design The study design is a cost-effectiveness and cost-utility analysis of a MBEGI in comparison with the usual care of non-specific sub-acute LBP. Measures on effectiveness and costs of both interventions will be obtained from a cluster randomised controlled clinical trial carried out in 38 Catalan primary health care centres, enrolling 932 patients between 18 and 65 years old with a diagnosis of non-specific sub-acute LBP. Effectiveness measures are: pharmaceutical treatments, work sick leave (% and duration in days), Roland Morris disability, McGill pain intensity, Fear Avoidance Beliefs (FAB) and Golberg Questionnaires. Utility measures will be calculated from the SF-12. The analysis will be performed from a social perspective. The temporal horizon is at 3 months (change to chronic LBP) and 12 months (evaluate the outcomes at long term). Assessment of outcomes will be blinded and will follow the intention-to-treat principle. Discussion We hope to demonstrate the cost-effectiveness and cost-utility of MBEGI, see an improvement in the patients' quality of life, achieve a reduction in the duration of episodes and the chronicity of non-specific low back pain, and be able to report a decrease in the social costs. If the intervention is cost-effectiveness and cost-utility, it could be applied to Primary Health Care Centres. Trial registration ISRCTN: ISRCTN58719694 PMID:21859489

Alcohol Warning Label Awareness and Attention: A Multi-method Study.

PubMed

Pham, Cuong; Rundle-Thiele, Sharyn; Parkinson, Joy; Li, Shanshi

2018-01-01

Evaluation of alcohol warning labels requires careful consideration ensuring that research captures more than awareness given that labels may not be prominent enough to attract attention. This study investigates attention of current in market alcohol warning labels and examines whether attention can be enhanced through theoretically informed design. Attention scores obtained through self-report methods are compared to objective measures (eye-tracking). A multi-method experimental design was used delivering four conditions, namely control, colour, size and colour and size. The first study (n = 559) involved a self-report survey to measure attention. The second study (n = 87) utilized eye-tracking to measure fixation count and duration and time to first fixation. Analysis of Variance (ANOVA) was utilized. Eye-tracking identified that 60% of participants looked at the current in market alcohol warning label while 81% looked at the optimized design (larger and red). In line with observed attention self-reported attention increased for the optimized design. The current study casts doubt on dominant practices (largely self-report), which have been used to evaluate alcohol warning labels. Awareness cannot be used to assess warning label effectiveness in isolation in cases where attention does not occur 100% of the time. Mixed methods permit objective data collection methodologies to be triangulated with surveys to assess warning label effectiveness. Attention should be incorporated as a measure in warning label effectiveness evaluations. Colour and size changes to the existing Australian warning labels aided by theoretically informed design increased attention. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.

Phasic dopamine signals: from subjective reward value to formal economic utility

PubMed Central

Schultz, Wolfram; Carelli, Regina M; Wightman, R Mark

2015-01-01

Although rewards are physical stimuli and objects, their value for survival and reproduction is subjective. The phasic, neurophysiological and voltammetric dopamine reward prediction error response signals subjective reward value. The signal incorporates crucial reward aspects such as amount, probability, type, risk, delay and effort. Differences of dopamine release dynamics with temporal delay and effort in rodents may derive from methodological issues and require further study. Recent designs using concepts and behavioral tools from experimental economics allow to formally characterize the subjective value signal as economic utility and thus to establish a neuronal value function. With these properties, the dopamine response constitutes a utility prediction error signal. PMID:26719853

Shock to the system: How catastrophic events and institutional relationships impact Japanese energy policymaking, resilience, and innovation

NASA Astrophysics Data System (ADS)

Sklarew, Jennifer F.

External shocks do not always generate energy system transformation. This dissertation examines how government relationships with electric utilities and the public impact whether shocks catalyze energy system change. The study analyzes Japanese energy policymaking from the oil crises through the Fukushima nuclear disaster. Findings reveal that policymakers' cooperation with and clout over electric utilities and the public can enable shocks to transform energy systems. When electric utilities wield clout, public trust in and influence on the government determine the existing system's resilience and the potential for a new system to emerge. Understanding this effect informs energy policy design and innovation.

Utility interconnection experience with an operating central station MW-sized photovoltaic plant

NASA Astrophysics Data System (ADS)

Patapoff, N. W., Jr.; Mattijetz, D. R.

1985-08-01

Utility experience to date with photovoltaic systems has been with small dispersed systems designed primarily as demonstration projects. The 1 MW photovoltaic plant at Lugo Substation in Hesperia, California, has been designed and is operated as a central station power plant. The performance of the system has been monitored since first coming on line in November 1982. The potential impact of this and similar systems upon the operation of the utility is discussed.

The effect of Channeling on in-home utilization and subsequent nursing home care: a simultaneous equation perspective.

PubMed Central

Rabiner, D J; Stearns, S C; Mutran, E

1994-01-01

OBJECTIVE. This study explored the relationship between participation in a home/community-based long-term care case management intervention (known as the Channeling demonstration), use of formal in-home care, and subsequent nursing home utilization. STUDY DESIGN. Structural analysis of the randomized Channeling intervention was conducted to decompose the total effects of Channeling on nursing home use into direct and indirect effects. DATA COLLECTION METHOD. Secondary data analysis of the National Long-Term Care Data Set. PRINCIPAL FINDINGS. The use of formal in-home care, which was increased by the Channeling intervention, was positively associated with nursing home utilization at 12 months. However, the negative direct effect of Channeling on nursing home use was of sufficient magnitude to offset this positive indirect effect, so that a small but significant negative total effect of Channeling on subsequent nursing home utilization was found. CONCLUSIONS. This study shows why Channeling did not have a large total impact on nursing home utilization. The analysis did not provide evidence of direct substitution of in-home care for nursing home care because the direct reductions in nursing home utilization due to other aspects of Channeling (including, but not limited to case management) were substantially offset by the indirect increases in nursing home utilization associated with additional home care use. PMID:8002352

RXIO: Design and implementation of high performance RDMA-capable GridFTP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tian, Yuan; Yu, Weikuan; Vetter, Jeffrey S.

2011-12-21

For its low-latency, high bandwidth, and low CPU utilization, Remote Direct Memory Access (RDMA) has established itself as an effective data movement technology in many networking environments. However, the transport protocols of grid run-time systems, such as GridFTP in Globus, are not yet capable of utilizing RDMA. In this study, we examine the architecture of GridFTP for the feasibility of enabling RDMA. An RDMA-capable XIO (RXIO) framework is designed and implemented to extend its XIO system and match the characteristics of RDMA. Our experimental results demonstrate that RDMA can significantly improve the performance of GridFTP, reducing the latency by 32%more » and increasing the bandwidth by more than three times. In achieving such performance improvements, RDMA dramatically cuts down CPU utilization of GridFTP clients and servers. In conclusion, these results demonstrate that RXIO can effectively exploit the benefits of RDMA for GridFTP. It offers a good prototype to further leverage GridFTP on wide-area RDMA networks.« less

Hydrogen disposal investigation for the Space Shuttle launch complex at Vandenberg Air Force Base

NASA Technical Reports Server (NTRS)

Breit, Terry J.; Elliott, George

1987-01-01

The concern of an overpressure condition on the aft end of the Space Shuttle caused by ignition of unburned hydrogen being trapped in the Space Shuttle Main Engine exhaust duct at the Vandenberg AFB launch complex has been investigated for fifteen months. Approximately twenty-five concepts have been reviewed, with four concepts being thoroughly investigated. The four concepts investigated were hydrogen burnoff ignitors (ignitors located throughout the exhaust duct to continuously ignite any unburned hydrogen), jet mixing (utilizing large volumes of high pressure air to ensure complete combustion of the hydrogen), steam inert (utilizing flashing hot water to inert the duct with steam) and open duct concept (design an open duct or above grade J-deflector to avoid trapping hydrogen gas). Extensive studies, analyses and testing were performed at six test sites with technical support from twenty-two major organizations. In December 1986, the Air Force selected the steam inert concept to be utilized at the Vandenberg launch complex and authorized the design effort.

Studies of the Twin Helix Parametric-resonance Ionization Cooling Channel with COSY INFINITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.A. Maloney, K.B. Beard, R.P. Johnson, A. Afanasev, S.A. Bogacz, Y.S. Derbenev, V.S. Morozov, B. Erdelyi

2012-07-01

A primary technical challenge to the design of a high luminosity muon collider is an effective beam cooling system. An epicyclic twin-helix channel utilizing parametric-resonance ionization cooling has been proposed for the final 6D cooling stage. A proposed design of this twin-helix channel is presented that utilizes correlated optics between the horizontal and vertical betatron periods to simultaneously focus transverse motion of the beam in both planes. Parametric resonance is induced in both planes via a system of helical quadrupole harmonics. Ionization cooling is achieved via periodically placed wedges of absorbing material, with intermittent rf cavities restoring longitudinal momentum necessarymore » to maintain stable orbit of the beam. COSY INFINITY is utilized to simulate the theory at first order. The motion of particles around a hyperbolic fixed point is tracked. Comparison is made between the EPIC cooling channel and standard ionization cooling effects. Cooling effects are measured, after including stochastic effects, for both a single particle and a distribution of particles.« less

Tropical rain mapping radar on the Space Station

NASA Technical Reports Server (NTRS)

Im, Eastwood; Li, Fuk

1989-01-01

The conceptual design for a tropical rain mapping radar for flight on the manned Space Station is discussed. In this design the radar utilizes a narrow, dual-frequency (9.7 GHz and 24.1 GHz) beam, electronically scanned antenna to achieve high spatial (4 km) and vertical (250 m) resolutions and a relatively large (800 km) cross-track swath. An adaptive scan strategy will be used for better utilization of radar energy and dwell time. Such a system can detect precipitation at rates of up to 100 mm/hr with accuracies of roughly 15 percent. With the proposed space-time sampling strategy, the monthly averaged rainfall rate can be estimated to within 8 percent, which is essential for many climatological studies.

Phase 1 of the First Small Power System Experiment (engineering Experiment No. 1). Volume 2: System Concept Selection. [development and testing of a solar thermal power plant

NASA Technical Reports Server (NTRS)

Holl, R. J.

1979-01-01

The development of a modular solar thermal power system for application in the 1 to 10 MWe range is presented. The system is used in remote utility applications, small communities, rural areas, and for industrial uses. Systems design and systems optimization studies are conducted which consider plant size, annual capacity factors, and startup time as variables. Investigations are performed on the energy storage requirements and type of energy storage, concentrator design and field optimization, energy transport, and power conversion subsystems. The system utilizes a Rankine cycle, an axial flow steam turbine for power conversion, and heat transfer sodium for collector fluid.

Recruitment and Retention of Information Technology Professionals in Southern California Municipal Government

ERIC Educational Resources Information Center

Roberts, Douglas P.

2009-01-01

This study investigates the recruitment and retention challenges, facing municipal government IT organizations in Southern California, by examining the relationships between worker demographics, competencies, experience levels, tenure, and training within the organizations. Utilizing a mixed method, non-experimental design, the study examines…

Higher Education for Sustainable Development: A Systematic Review

ERIC Educational Resources Information Center

Wu, Yen-Chun Jim; Shen, Ju-Peng

2016-01-01

Purpose: This study aims to provide a complete understanding of academic research into higher education for sustainable development (HESD). Design/methodology/approach: This study utilizes a systematic review of four scientific literature databases to outline topics of research during the UN's Decade of Education for Sustainable Development…

Graduate Student Needs in Relation to Library Research Skills

ERIC Educational Resources Information Center

Young, Shawna; Jacobs, Warren

2013-01-01

Traditionally, graduate study includes a research component, requiring library skills to locate relevant literature. Upon matriculation into graduate programs, many students are underprepared in library research skills, making library instruction a priority for the success of graduate students. This qualitative study, utilizing emergent design,…

Validation of the Juhnke-Balkin Life Balance Inventory

ERIC Educational Resources Information Center

Davis, R. J.; Balkin, Richard S.; Juhnke, Gerald A.

2014-01-01

Life balance is an important construct within the counseling profession. A validation study utilizing exploratory factor analysis and multiple regression was conducted on the Juhnke-Balkin Life Balance Inventory. Results from the study serve as evidence of validity for an assessment instrument designed to measure life balance.

Automated Writing Evaluation Program's Effect on Student Writing Achievement

ERIC Educational Resources Information Center

Holman, Lester Donnie

2011-01-01

In an ex post facto causal-comparative research design, this study investigated the effectiveness of Automated Writing Evaluation (AWE) programs on raising the student writing achievement. Tennessee Comprehensive Assessment Program (TCAP) writing achievement scores from the 2010 administration were utilized for this study. The independent variable…

Cross-Cultural Pedagogy: Practical Strategies for a Successful Interprofessional Study Abroad Course

ERIC Educational Resources Information Center

Bai, Jieru; Larimer, Susan; Riner, Mary Beth

2016-01-01

This article discusses some practical strategies for designing and implementing a cross-cultural interprofessional study abroad course, including pre-departure preparation, facilitating small groups with local students, establishing a weekly theme, utilizing role-play and reflective assignments, and implementing meaningful evaluation strategies.…

Earth Observatory Satellite system definition study. Report 7: EOS system definition report

NASA Technical Reports Server (NTRS)

1974-01-01

The Earth Observatory Satellite (EOS) study is summarized to show the modular design of a general purpose spacecraft, a mission peculiar segment which performs the EOS-A mission, an Operations Control Center, a Data Processing Facility, and a design for Low Cost Readout Stations. The study verified the practicality and feasibility of the modularized spacecraft with the capability of supporting many missions in the Earth Observation spectrum. The various subjects considered in the summary are: (1) orbit/launch vehicle tradeoff studies and recommendations, (2) instrument constraints and interfaces, (3) design/cost tradeoff and recommendations, (4) low cost management approach and recommendations, (5) baseline system description and specifications, and (6) space shuttle utilization and interfaces.

Direct medical cost and utility analysis of diabetics outpatient at Karanganyar public hospital

NASA Astrophysics Data System (ADS)

Eristina; Andayani, T. M.; Oetari, R. A.

2017-11-01

Diabetes Mellitus is a high cost disease, especially in long-term complication treatment. Long-term complication treatment cost was a problem for the patient, it can affect patients quality of life stated with utility value. The purpose of this study was to determine the medical cost, utility value and leverage factors of diabetics outpatient. This study was cross sectional design, data collected from retrospective medical record of the financial and pharmacy department to obtain direct medical cost, utility value taken from EQ-5D-5L questionnaire. Data analyzed by Mann-Whitney and Kruskal-Wallis test. Results of this study were IDR 433,728.00 for the direct medical cost and pharmacy as the biggest cost. EQ-5D-5L questionnaire showed the biggest proportion on each dimension were 61% no problem on mobility dimension, 89% no problems on self-care dimension, 54% slight problems on usual activities dimension, 41% moderate problems on pain/discomfort dimension and 48% moderate problems on anxiety/depresion dimension. Build upon Thailand value set, utility value was 0.833. Direct medical cost was IDR 433,728.00 with leverage factors were pattern therapy, blood glucose level and complication. Utility value was 0.833 with leverage factors were patients characteristic, therapy pattern, blood glucose level and complication.

Are there genetic influences on addiction: evidence from family, adoption and twin studies.

PubMed

Agrawal, Arpana; Lynskey, Michael T

2008-07-01

In this exciting era of gene discovery, we review evidence from family, adoption and twin studies that examine the genetic basis for addiction. With a focus on the classical twin design that utilizes data on monozygotic and dizygotic twins, we discuss support in favor of heritable influences on alcohol, nicotine, cannabis and other illicit drug dependence. We review whether these genetic factors also influence earlier stages (e.g. experimentation) of the addictive process and whether there are genetic influences specific to each psychoactive substance. Converging evidence from these studies supports the role of moderate to high genetic influences on addiction with estimates ranging from 0.30 to 0.70. The changing role of these heritable factors as a function of gender, age and cultural characteristics is also discussed. We highlight the importance of the interplay between genes and the environment as it relates to risk for addiction and the utility of the children-of-twins design for emerging studies of gene-environment interaction is presented. Despite the advances being made by low-cost high-throughput whole genome association assays, we posit that information garnered from twin studies, especially extended twin designs with power to examine gene-environment interactions, will continue to form the foundation for genomic research.

Selection Bias and Utilization of the Dual Eligibles in Medicare and Medicaid HMOs

PubMed Central

Zhang, Hui; Kane, Robert L; Dowd, Bryan; Feldman, Roger

2008-01-01

Objective To examine the existence of selection bias in the first 3 years of the Minnesota Senior Health Options (MSHO) demonstration and to estimate the MSHO effects on medical services utilization after adjusting for selection bias. Data Sources Monthly dual eligibility data and MSHO encounter data of March 1997–December 2000 and Medicaid encounter data of January 1995–December 2000 from the Minnesota Department of Human Services; Medicare fee-for-service claims data of January 1995–December 2000 from the Centers for Medicare and Medicaid Services. Study Design Quasi-experimental design comparing utilization between MSHO and control groups; multiple econometric and statistical models were estimated with time-invariant and time-varying covariates. Principal Findings Favorable MSHO selection was found in the nursing home (NH) and community populations, but selection bias did not substantially affect the findings. Enrollment in MSHO for more than 1 year reduced inpatient hospital admissions and days, emergency room and physician visits for NH residents, and lowered physician visits for community residents. Conclusions There was favorable selection in the first 3 years of the MSHO program. Enrollment in MSHO reduced several types of utilization for the NH group and physician visits for community enrollees. PMID:18479403

Trade Studies for a Manned High-Power Nuclear Electric Propulsion Vehicle

NASA Technical Reports Server (NTRS)

SanSoucie, Michael; Hull, Patrick V.; Irwin, Ryan W.; TInker, Michael L.; Patton, Bruce W.

2005-01-01

Nuclear electric propulsion (NEP) vehicles will be needed for future manned missions to Mars and beyond. Candidate vehicles must be identified through trade studies for further detailed design from a large array of possibilities. Genetic algorithms have proven their utility in conceptual design studies by effectively searching a large design space to pinpoint unique optimal designs. This research combines analysis codes for NEP subsystems with genetic algorithm-based optimization. Trade studies for a NEP reference mission to the asteroids were conducted to identify important trends, and to determine the effects of various technologies and subsystems on vehicle performance. It was found that the electric thruster type and thruster performance have a major impact on the achievable system performance, and that significant effort in thruster research and development is merited.

Predictors of Dental Care Use: Findings from the National Longitudinal Study of Adolescent Health

PubMed Central

Okunseri, Christopher; Okunseri, Elaye; Garcia, Raul I.; Visotcky, Alexis (Dye); Szabo, Aniko

2013-01-01

Objective To examine longitudinal trends and associated factors in dental service utilization by adolescents progressing to early adulthood in the United States. Data Source The National Longitudinal Study of Adolescent Health from Waves I (1994-95), II (1996), III (2001-2002) and IV (2007-2008). Study Design This is a retrospective, observational study of adolescents' transition to early adulthood. We obtained descriptive statistics and performed logistic regression analyses to identify the effects of baseline and concurrent covariates on dental service utilization from adolescence to early adulthood over time. Principal Findings Dental service utilization within the prior 12 months peaked at age 16 (72%), gradually decreased until age 21 (57%), and thereafter remained flat. Whites and Asians had a 10-20 percentage points higher proportion of dental service utilization at most ages compared to Blacks and Hispanics. Dental service utilization at later follow-up visits was strongly associated with baseline utilization with OR= 10.7, 2.4 and 1.5 at the 1-year, 7-year and 13-year follow-ups respectively. These effects decreased when adjusted for current income, insurance and education. Compared to Whites, Blacks were consistently less likely to report any dental examination. Conclusion Dental service utilization was highest in adolescents. Gender, education, health insurance and income in young adulthood were significant predictors of reporting a dental examination. Blacks had lower odds of reporting a dental examination either as adolescents or as young adults. PMID:23850156

Capital Improvement Program Environmental Assessment, Dyess Air Force Base, Texas

DTIC Science & Technology

2010-09-01

utility extension structures would be designed to avoid crossing wetlands to the extent feasible. If a project necessitates a wetlands utility... crossing , horizontal boring techniques would be used to route the utility under the wetlands. Because horizontal boring effectively avoids disturbance...utilized if the utility extension would involve crossing a roadway. • All new utility equipment would be polychlorinated biphenyl (PCB) free

Using incentives to improve resource utilization: a quasi-experimental evaluation of an ICU quality improvement program

PubMed Central

Murphy, David J.; Lyu, Peter F.; Gregg, Sara R.; Martin, Greg S.; Hockenberry, Jason M.; Coopersmith, Craig M.; Sterling, Michael; Buchman, Timothy G.; Sevransky, Jonathan

2015-01-01

Objective Healthcare systems strive to provide quality care at lower cost. Arterial blood gas testing (ABGs), chest radiographs (CXRs), and red blood cell transfusions (RBCs) provide an important example of opportunities to reduce excess resource utilization within the ICU. We describe the effect of a multifaceted quality improvement program designed to decrease avoidable ABGs, CXRs, and RBCs utilization on utilization of these resources and patient outcomes. Design Prospective pre-post cohort study Setting Seven ICUs in an academic healthcare system Patients All adult ICU patients admitted to study ICUs during consecutive baseline (n=7,357), intervention (n=7,553), and follow up (n=7,657) years between September 2010 and August 2013. Interventions A multifaceted quality improvement program including provider education, audit and feedback, and unit-based provider financial incentives targeting ABG, CXR, and RBC utilization. Measurements and Main Results The primary outcome was the number of orders for ABGs, CXRs, and RBCs per patient. Compared to the baseline period, unadjusted ABG, CXR, and RBC utilization in the intervention period was reduced by 42%, 26%, and 17%, respectively (p<0.01). After adjusting for potentially relevant patient factors, the intervention was associated with 128 fewer ABGs, 73 fewer CXRs, and 16 fewer RBCs per 100 patients (p<0.01). This effect was durable during the follow up year. This reduction yielded an approximate net savings of $1.5 M in direct costs over the intervention and follow-up years after accounting for the direct costs of the program. Unadjusted hospital mortality decreased from 7% in the baseline period to 5.2% in the intervention period (p<0.01). This reduction remained significant after adjusting for patient factors (OR= 0.43, P<0.01). Conclusions Implementation of a multifaceted quality improvement program including financial incentives was associated with significant improvements in resource utilization. Our findings provide evidence supporting the safety, effectiveness, and sustainability of incentive-based quality improvement interventions. PMID:26496444

Space processing applications payload equipment study. Volume 2E: Commercial equipment utility

NASA Technical Reports Server (NTRS)

Smith, A. G. (Editor)

1974-01-01

Examination of commercial equipment technologies revealed that the functional performance requirements of space processing equipment could generally be met by state-of-the-art design practices. Thus, an apparatus could be evolved from a standard item or derived by custom design using present technologies. About 15 percent of the equipment needed has no analogous commercial base of derivation and requires special development. This equipment is involved primarily with contactless heating and position control. The derivation of payloads using commercial equipment sources provides a broad and potentially cost-effective base upon which to draw. The derivation of payload equipment from commercial technologies poses other issues beyond that of the identifiable functional performance, but preliminary results on testing of selected equipment testing appear quite favorable. During this phase of the SPA study, several aspects of commercial equipment utility were assessed and considered. These included safety, packaging and structural, power conditioning (electrical/electronic), thermal and materials of construction.

A “SMART” Design for Building Individualized Treatment Sequences

PubMed Central

Lei, H.; Nahum-Shani, I.; Lynch, K.; Oslin, D.; Murphy, S.A.

2013-01-01

Interventions often involve a sequence of decisions. For example, clinicians frequently adapt the intervention to an individual’s outcomes. Altering the intensity and type of intervention over time is crucial for many reasons, such as to obtain improvement if the individual is not responding or to reduce costs and burden when intensive treatment is no longer necessary. Adaptive interventions utilize individual variables (severity, preferences) to adapt the intervention and then dynamically utilize individual outcomes (response to treatment, adherence) to readapt the intervention. The Sequential Multiple Assignment Randomized Trial (SMART)provides high-quality data that can be used to construct adaptive interventions. We review the SMART and highlight its advantages in constructing and revising adaptive interventions as compared to alternative experimental designs. Selected examples of SMART studies are described and compared. A data analysis method is provided and illustrated using data from the Extending Treatment Effectiveness of Naltrexone SMART study. PMID:22224838

Construction and Utilization of a Beowulf Computing Cluster: A User's Perspective

NASA Technical Reports Server (NTRS)

Woods, Judy L.; West, Jeff S.; Sulyma, Peter R.

2000-01-01

Lockheed Martin Space Operations - Stennis Programs (LMSO) at the John C Stennis Space Center (NASA/SSC) has designed and built a Beowulf computer cluster which is owned by NASA/SSC and operated by LMSO. The design and construction of the cluster are detailed in this paper. The cluster is currently used for Computational Fluid Dynamics (CFD) simulations. The CFD codes in use and their applications are discussed. Examples of some of the work are also presented. Performance benchmark studies have been conducted for the CFD codes being run on the cluster. The results of two of the studies are presented and discussed. The cluster is not currently being utilized to its full potential; therefore, plans are underway to add more capabilities. These include the addition of structural, thermal, fluid, and acoustic Finite Element Analysis codes as well as real-time data acquisition and processing during test operations at NASA/SSC. These plans are discussed as well.

Shuttle orbiter storage locker system: A study

NASA Technical Reports Server (NTRS)

Butler, D. R.; Schowalter, D. T.; Weil, D. C.

1973-01-01

Study has been made to assure maximum utility of storage space and crew member facilities in planned space shuttle orbiter. Techniques discussed in this study should be of interest to designers of storage facilities in which space is at premium and vibration is severe. Manufacturers of boats, campers, house trailers, and aircraft could benefit from it.

Are You an Online Team Player? A Pilot Study

ERIC Educational Resources Information Center

Rawlings, Melody

2014-01-01

The purpose of this pilot case study was to answer the following research questions: How do previous experiences affect students' attitudes toward online teamwork? When do students' attitudes toward online teamwork first develop and why? Using a social constructivist framework, a qualitative case study design was utilized to conduct an online…

Students' Perceptions of Reading and Learning in Social Studies: A Multimethod Approach

ERIC Educational Resources Information Center

Beck, Jori S.; Buehl, Michelle M.; Taboada Barber, Ana

2015-01-01

This article conveys the findings from 2 separate, but related, investigations designed to uncover students' perceptions of reading and learning in middle school social studies as well as their engagement in this content area. Study 1 utilized semistructured interviews as an initial foray into understanding students' perceptions of reading and…

A Mental Health Training Format for Adult Education Teachers

ERIC Educational Resources Information Center

Meek, Fiona; Specht, Jacqueline; Rodger, Susan

2017-01-01

The present study investigated the needs of adult education staff pertaining to adult students' mental health issues within a local school board. The study utilized mixed-methods design and was divided into progression of three separate studies. An initial focus group was conducted to identify the 12 participants' concerns and provide a direction…

A Phenomenological Study to Discover Low-Income Adults' Perceptions and Expectations Regarding Financial Literacy

ERIC Educational Resources Information Center

Schaffer, Brigid Ann

2013-01-01

This phenomenological study explored the perceptions and expectations of low income adults regarding financial literacy to discover ways to increase attendance in financial literacy programs designs for this cohort. The study utilized interviews with closed-ended questions to establish the participants' backgrounds, then opened-ended questions to…

Undergraduate Students' Resistance to Study Skills Course

ERIC Educational Resources Information Center

Yuksel, Sedat

2006-01-01

Research indicate that students generally fail to benefit from study skills courses and show resistance to this course in higher education level. The purpose of this research is to investigate reasons why students show resistance to the course of study skills and habits. In this research, a qualitative design utilizing retrospective interviews was…

The Benefits of Short-Term Study Abroad as a Blended Learning Experience

ERIC Educational Resources Information Center

Slotkin, Michael H.; Durie, Christopher J.; Eisenberg, Jarin R.

2012-01-01

Purpose: The purpose of this paper is to highlight the role blended learning plays in expanding study abroad opportunities. Design/methodology/approach: The approach utilized involves providing a synopsis of research dealing with study abroad and its benefits, particularly for student populations likely to comprise a significant portion of the…

The Fun Culture in Seniors' Online Communities

ERIC Educational Resources Information Center

Nimrod, Galit

2011-01-01

Purpose of the study: Previous research found that "fun on line" is the most dominant content in seniors' online communities. The present study aimed to further explore the "fun culture" in these communities and to discover its unique qualities. Design and Methods: The study applied an online ethnography (netnography) approach, utilizing a full…

Identifying the needs of elderly, hearing-impaired persons: the importance and utility of hearing aid attributes.

PubMed

Meister, Hartmut; Lausberg, Isabel; Kiessling, Juergen; von Wedel, Hasso; Walger, Martin

2002-11-01

Older patients represent the majority of hearing-aid users. The needs of elderly, hearing-impaired subjects are not entirely identified. The present study aims to determine the importance of fundamental hearing-aid attributes and to elicit the utility of associated hypothetical hearing aids for older patients. This was achieved using a questionnaire-based conjoint analysis--a decompositional approach to preference measurement offering a realistic study design. A random sample of 200 experienced hearing-aid users participated in the study. Though three out of the six examined attributes revealed age-related dependencies, the only significant effect was found for the attribute "handling", which was considerably more important for older than younger hearing-aid users. A trend of decreasing importance of speech intelligibility in noise and increasing significance of speech in quiet was observed for subjects older than 70 years. In general, the utility of various hypothetical hearing aids was similar for older and younger subjects. Apart from the attribute "handling", older and younger subjects have comparable needs regarding hearing-aid features. On the basis of the examined attributes, there is no requirement for hearing aids designed specifically for elderly hearing-aid users, provided that ergonomic features are considered and the benefits of modern technology are made fully available for older patients.

Improved integrating-sphere throughput with a lens and nonimaging concentrator.

PubMed

Chenault, D B; Snail, K A; Hanssen, L M

1995-12-01

A reflectometer design utilizing an integrating sphere with a lens and nonimaging concentrator is described. Compared with previous designs where a collimator was used to restrict the detector field of view, the concentrator-lens combination significantly increases the throughput of the reflectometer. A procedure for designing lens-concentrators is given along with the results of parametric studies. The measured angular response of a lens-concentrator system is compared with ray-trace predictions and with the response of an ideal system.

Workplace health promotion and utilization of health services: follow-up data findings.

PubMed

Deitz, Diane; Cook, Royer; Hersch, Rebekah

2005-01-01

This article reports findings from a workplace substance abuse prevention program designed to investigate best practices. The study sought to assess the effects of the worksite wellness program and employee assistance program (EAP) on healthcare utilization and costs, identify predictors of outpatient costs and visits, and assess the effect of the intervention on health attitudes, behaviors, and behavioral health-related costs and visits. Results indicated that visits to the EAP increased as did overall healthcare visits, that utilization of healthcare services and costs were higher in the population receiving substance abuse prevention intervention, and that employees in the substance abuse prevention intervention reported lower heavy drinking and binge drinking. Data suggest that substance abuse prevention may result in higher healthcare costs and utilization in the short term, but a reduction in health risk behaviors such as heavy drinking may result in lower healthcare costs and utilization in the long term.

Vortex-Lattice Utilization. [in aeronautical engineering and aircraft design

NASA Technical Reports Server (NTRS)

1976-01-01

The many novel, innovative, and unique implementations and applications of the vortex-lattice method to aerodynamic design and analysis which have been performed by Industry, Government, and Universities were presented. Although this analytical tool is not new, it continues to be utilized and refined in the aeronautical community.

TEST DESIGN FOR ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) OF ADD-ON NOX CONTROL UTILIZING OZONE INJECTION

EPA Science Inventory

The paper discusses the test design for environmental technology verification (ETV) of add-0n nitrogen oxides (NOx) control utilizing ozone injection. (NOTE: ETV is an EPA-established program to enhance domestic and international market acceptance of new or improved commercially...

Afro-Caribbean and African American Students, Family Factors, and the Influence on Science Performance in the United States: The Untold Story

ERIC Educational Resources Information Center

Pinder, Patrice Juliet

2012-01-01

The primary objectives of this research were to explore achievement pattern differences and the influence of family factors on the achievement patterns of Afro-Caribbean and African American students within the United States (U.S.). The study utilized two research designs; a causal-comparative and a correlational design. A student family…

Understanding Adherence to 5 Servings of Fruits and Vegetables per Day: A Theory of Planned Behavior Perspective

ERIC Educational Resources Information Center

Blanchard, Chris M.; Fisher, Janet; Sparling, Phillip B.; Shanks, Tiffany Hunt; Nehl, Eric; Rhodes, Ryan E.; Courneya, Kerry S.; Baker, Frank

2009-01-01

Objective: The primary purpose of the present study was to examine the utility of the Theory of Planned Behavior (TPB) in explaining the 5-A-Day intentions and behavior of college students. A secondary purpose was to determine whether any of the TPB relationships were moderated by gender or ethnicity. Design: A prospective design that asked…

Bridging the Field Trip Gap: Integrating Web-Based Video as a Teaching and Learning Partner in Interior Design Education

ERIC Educational Resources Information Center

Roehl, Amy

2013-01-01

This study utilizes web-based video as a strategy to transfer knowledge about the interior design industry in a format that interests the current generation of students. The model of instruction developed is based upon online video as an engaging, economical, and time-saving alternative to a field trip, guest speaker, or video teleconference.…

Engineering-Based Problem Solving Strategies in AP Calculus: An Investigation into High School Student Performance on Related Rate Free-Response Problems

ERIC Educational Resources Information Center

Thieken, John

2012-01-01

A sample of 127 high school Advanced Placement (AP) Calculus students from two schools was utilized to study the effects of an engineering design-based problem solving strategy on student performance with AP style Related Rate questions and changes in conceptions, beliefs, and influences. The research design followed a treatment-control multiple…

Porter's Five Competitive Forces Framework and Other Factors That Influence the Choice of Response Strategies Adopted by Public Universities in Kenya

ERIC Educational Resources Information Center

Mathooko, Francis M.; Ogutu, Martin

2015-01-01

Purpose: The purpose of this paper is to establish the extent to which Porter's five competitive forces (PFCF) framework, among other factors drive the choice of response strategies adopted by public universities in Kenya. Design/Methodology/Approach: The study design was descriptive and utilized a cross-sectional survey of all the public…

An Expert Instructor's Use of Social Congruence, Cognitive Congruence, and Expertise in an Online Case-Based Instructional Design Course

ERIC Educational Resources Information Center

Watson, Sunnie Lee; Koehler, Adrie A.; Ertmer, Peggy; Kim, WooRi; Rico, Rudy

2018-01-01

Promoting and sustaining effective discussion--that which contributes to learning--is a skill that eludes many instructors (Darling-Hammond, 2008; Ge, Yamashiro, & Lee, 2000). This study explored the role and strategies of an expert instructor in an online advanced instructional design (ID) course that utilized a case-based learning (CBL)…

EPDM Based Double Slope Triangular Enclosure Solar Collector: A Novel Approach

PubMed Central

Qureshi, Shafiq R.; Khan, Waqar A.

2014-01-01

Solar heating is one of the important utilities of solar energy both in domestic and industrial sectors. Evacuated tube heaters are a commonly used technology for domestic water heating. However, increasing cost of copper and nickel has resulted in huge initial cost for these types of heaters. Utilizing solar energy more economically for domestic use requires new concept which has low initial and operating costs together with ease of maintainability. As domestic heating requires only nominal heating temperature to the range of 60–90°C, therefore replacing nickel coated copper pipes with any cheap alternate can drastically reduce the cost of solar heater. We have proposed a new concept which utilizes double slope triangular chamber with EPDM based synthetic rubber pipes. This has reduced the initial and operating costs substantially. A detailed analytical study was carried out to design a novel solar heater. On the basis of analytical design, a prototype was manufactured. Results obtained from the experiments were found to be in good agreement with the analytical study. A maximum error of 10% was recorded at noon. However, results show that error is less than 5% in early and late hours. PMID:24688407

EPDM based double slope triangular enclosure solar collector: a novel approach.

PubMed

Qureshi, Shafiq R; Khan, Waqar A; Sarwar, Waqas

2014-01-01

Solar heating is one of the important utilities of solar energy both in domestic and industrial sectors. Evacuated tube heaters are a commonly used technology for domestic water heating. However, increasing cost of copper and nickel has resulted in huge initial cost for these types of heaters. Utilizing solar energy more economically for domestic use requires new concept which has low initial and operating costs together with ease of maintainability. As domestic heating requires only nominal heating temperature to the range of 60-90 °C, therefore replacing nickel coated copper pipes with any cheap alternate can drastically reduce the cost of solar heater. We have proposed a new concept which utilizes double slope triangular chamber with EPDM based synthetic rubber pipes. This has reduced the initial and operating costs substantially. A detailed analytical study was carried out to design a novel solar heater. On the basis of analytical design, a prototype was manufactured. Results obtained from the experiments were found to be in good agreement with the analytical study. A maximum error of 10% was recorded at noon. However, results show that error is less than 5% in early and late hours.

Sensitivity Analysis of Hybrid Propulsion Transportation System for Human Mars Expeditions

NASA Technical Reports Server (NTRS)

Chai, Patrick R.; Joyce, Ryan T.; Kessler, Paul D.; Merrill, Raymond G.; Qu, Min

2017-01-01

The National Aeronautics and Space Administration continues to develop and refine various transportation options to successfully field a human Mars campaign. One of these transportation options is the Hybrid Transportation System which utilizes both solar electric propulsion and chemical propulsion. The Hybrid propulsion system utilizes chemical propulsion to perform high thrust maneuvers, where the delta-V is most optimal when ap- plied to save time and to leverage the Oberth effect. It then utilizes solar electric propulsion to augment the chemical burns throughout the interplanetary trajectory. This eliminates the need for the development of two separate vehicles for crew and cargo missions. Previous studies considered single point designs of the architecture, with fixed payload mass and propulsion system performance parameters. As the architecture matures, it is inevitable that the payload mass and the performance of the propulsion system will change. It is desirable to understand how these changes will impact the in-space transportation system's mass and power requirements. This study presents an in-depth sensitivity analysis of the Hybrid crew transportation system to payload mass growth and solar electric propulsion performance. This analysis is used to identify the breakpoints of the current architecture and to inform future architecture and campaign design decisions.

Analysis of Low-Temperature Utilization of Geothermal Resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Brian

Full realization of the potential of what might be considered “low-grade” geothermal resources will require that we examine many more uses for the heat than traditional electricity generation. To demonstrate that geothermal energy truly has the potential to be a national energy source we will be designing, assessing, and evaluating innovative uses for geothermal-produced water such as hybrid biomass-geothermal cogeneration of electricity and district heating and efficiency improvements to the use of cellulosic biomass in addition to utilization of geothermal in district heating for community redevelopment projects. The objectives of this project were: 1) to perform a techno-economic analysis ofmore » the integration and utilization potential of low-temperature geothermal sources. Innovative uses of low-enthalpy geothermal water were designed and examined for their ability to offset fossil fuels and decrease CO2 emissions. 2) To perform process optimizations and economic analyses of processes that can utilize low-temperature geothermal fluids. These processes included electricity generation using biomass and district heating systems. 3) To scale up and generalize the results of three case study locations to develop a regionalized model of the utilization of low-temperature geothermal resources. A national-level, GIS-based, low-temperature geothermal resource supply model was developed and used to develop a series of national supply curves. We performed an in-depth analysis of the low-temperature geothermal resources that dominate the eastern half of the United States. The final products of this study include 17 publications, an updated version of the cost estimation software GEOPHIRES, and direct-use supply curves for low-temperature utilization of geothermal resources. The supply curves for direct use geothermal include utilization from known hydrothermal, undiscovered hydrothermal, and near-hydrothermal EGS resources and presented these results at the Stanford Geothermal Workshop. We also have incorporated our wellbore model into TOUGH2-EGS and began coding TOUGH2-EGS with the wellbore model into GEOPHIRES as a reservoir thermal drawdown option. Additionally, case studies for the WVU and Cornell campuses were performed to assess the potential for district heating and cooling at these two eastern U.S. sites.« less

Photovoltaic technology for sustainability: An investigation of the distributed utility concept as a policy framework

NASA Astrophysics Data System (ADS)

Letendre, Steven Emery

The U.S. electric utility sector in its current configuration is unsustainable. The majority of electricity in the United States is produced using finite fossil fuels. In addition, significant potential exists to improve the nation's efficient use of energy. A sustainable electric utility sector will be characterized by increased use of renewable energy sources and high levels of end-use efficiency. This dissertation analyzes two alternative policy approaches designed to move the U.S. electric utility sector toward sustainability. One approach is labeled incremental which involves maintaining the centralized structure of the electric utility sector but facilitating the introduction of renewable energy and efficiency into the electrical system through the pricing mechanism. A second policy approach was described in which structural changes are encouraged based on the emerging distributed utility (DU) concept. A structural policy orientation attempts to capture the unique localized benefits that distributed renewable resources and energy efficiency offer to electric utility companies and their customers. A market penetration analysis of PV in centralized energy supply and distributed peak-shaving applications is conducted for a case-study electric utility company. Sensitivity analysis was performed based on incremental and structural policy orientations. The analysis provides compelling evidence which suggests that policies designed to bring about structural change in the electric utility sector are needed to move the industry toward sustainability. Specifically, the analysis demonstrates that PV technology, a key renewable energy option likely to play an important role in a renewable energy future, will begin to penetrate the electrical system in distributed peak-shaving applications long before the technology is introduced as a centralized energy supply option. Most policies to date, which I term incremental, attempt to encourage energy efficiency and renewables through the pricing system. Based on past policy experience, it is unlikely that such an approach would allow PV to compete in Delaware as an energy supply option in the next ten to twenty years. Alternatively, a market-based, or green pricing, approach will not create significant market opportunities for PV as a centralized energy supply option. However, structural policies designed to encourage the explicit recognition of the localized benefits of distributed resources could result in PV being introduced into the electrical system early in the next century.

The Organizational Realities of Student Affairs: A Political Perspective

ERIC Educational Resources Information Center

Shinn, Jeremiah B.

2015-01-01

The purpose of this study was to understand the organizational functions of student-affairs at Indiana University and to understand the nature of the conflict between student-affairs and the larger organization. This study utilized the case-study research design. Much of the data collected and analyzed during this case study were of a historical…

Examining Social Studies Teachers' Views on Branch Teachers' Committee Meetings

ERIC Educational Resources Information Center

Kilcan, Bahadir; Çepni, Osman; Kilinç, Ali Çagatay

2018-01-01

The purpose of this study is to determine the views of social studies teachers on branch teachers' committee meetings (BTCM). This study utilized a qualitative method, phenomenological design. The sample of the research is composed of 16 teachers working in public secondary schools in the central district of Karabük province during the spring…

Universities: Can They Be Considered as Learning Organizations?: A Preliminary Micro-Level Perspective

ERIC Educational Resources Information Center

Bak, Ozlem

2012-01-01

Purpose: The purpose of this study is to explore a department in a UK higher education (HE) institute based on Senge's five characteristics of learning organizations. Design/methodology/approach: In this study, a case study method was utilized. The case study entailed two lines of enquiry: a questionnaire, which was distributed to a UK…

Theoretical Study of Si(x)Ge(y)Li(z)- (x=4-10, y=1-10, z=0-10) Clusters for Designing of Novel Nanostructured Materials to be Utilized as Anodes for Lithium-Ion Batteries

DTIC Science & Technology

2015-03-16

AFRL-OSR-VA-TR-2015-0088 Theoretical Study of Novel Nanostructured Materials for Lithium - Ion Batteries Mario Sanchez-Vazquez CENTRO DE INVESTIGACION...of Novel Nanostructured Materials to Be Utilized as Anodes for Lithium - ion Batteries 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-13-1-0175 5c...as anodes for Lithium - ion batteries Final Report Nancy Perez-Peralta and Mario Sanchez-Vazquez Abstract In order to find out if silicon

A Literature Review: Website Design and User Engagement.

PubMed

Garett, Renee; Chiu, Jason; Zhang, Ly; Young, Sean D

2016-07-01

Proper design has become a critical element needed to engage website and mobile application users. However, little research has been conducted to define the specific elements used in effective website and mobile application design. We attempt to review and consolidate research on effective design and to define a short list of elements frequently used in research. The design elements mentioned most frequently in the reviewed literature were navigation, graphical representation, organization, content utility, purpose, simplicity, and readability. We discuss how previous studies define and evaluate these seven elements. This review and the resulting short list of design elements may be used to help designers and researchers to operationalize best practices for facilitating and predicting user engagement.