Study on the creation and destruction of transport barriers via the effective safety factors for energetic particles

NASA Astrophysics Data System (ADS)

Ogawa, Shun; Leoncini, Xavier; Dif-Pradalier, Guilhem; Garbet, Xavier

2016-12-01

Charged particles with low kinetic energy move along the magnetic field lines, but so do not the energetic particles. We investigate the topological structure changes in the phase space of energetic particles with respect to the magnetic one. For this study, cylindrical magnetic fields with non-monotonic safety factors that induce the magnetic internal transport barrier are considered. We show that the topological structure of the magnetic field line and of the particle trajectories can be quite different. We explain this difference using the concept of an effective particle q-profile. Using this notion, we can investigate the location and existence of resonances for particle orbits that are different from the magnetic ones. These are examined both numerically by integrating an equation of motion and theoretically by the use of Alfvén's guiding center theory and by the use of an effective reduced Hamiltonian for the integrable unperturbed system. It is clarified that, for the energetic particles, the grad B drift effect shifts the resonances and the drift induced by curvature of the magnetic field line leads to the vanishing of the resonances. As a result, we give two different mechanisms that lead to the creation of transport barriers for energetic particles in the region where the magnetic field line is chaotic.

Intrinsic measures of field entropy in cosmological particle creation

NASA Astrophysics Data System (ADS)

Hu, B. L.; Pavon, D.

1986-11-01

Using the properties of quantum parametric oscillators, two quantities are identified which increase monotonically in time in the process of parametric amplification. The use of these quantities as possible measures of entropy generation in vacuum cosmological particle creation is suggested. These quantities which are of complementary nature are both related to the number of particles spontaneously created. Permanent address: Departamento de Termologia, Facultad de Ciencias, Universidad Autonoma de Barcelona, Ballaterra, Barcelona, Spain.

Non-minimal Particle Creation from Asymptotic-de Sitter Inflation

NASA Astrophysics Data System (ADS)

Yusofi, E.; Mohsenzadeh, M.

2018-06-01

A general form of quasi-de Sitter(dS) modes is used to study the creation of particle during the inflation. Actually, by considering the general form of inflaton field equation as a function of the Hankel function index and by using the Planck 2015 constraint on spectral index, we obtain the possible new constraints for the values of coupling constant in the era with asymptotic-dS space-time. Then, we explicitly calculate the general form of expectation value of the created particles in terms of the Hankel function index and the conformal time. The correction terms in the number of created particles are very tiny in the early time but can have the significant effects in the later universe. Our result is general and at the early time limit confirm the conventional special results for the Minkowski and dS background.

Is the continuous matter creation cosmology an alternative to ΛCDM?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fabris, J.C.; Pacheco, J.A. de Freitas; Piattella, O.F., E-mail: fabris@pq.cnpq.br, E-mail: pacheco@oca.eu, E-mail: oliver.piattella@pq.cnpq.br

2014-06-01

The matter creation cosmology is revisited, including the evolution of baryons and dark matter particles. The creation process affects only dark matter and not baryons. The dynamics of the ΛCDM model can be reproduced only if two conditions are satisfied: 1) the entropy density production rate and the particle density variation rate are equal and 2) the (negative) pressure associated to the creation process is constant. However, the matter creation model predicts a present dark matter-to-baryon ratio much larger than that observed in massive X-ray clusters of galaxies, representing a potential difficulty for the model. In the linear regime, amore » fully relativistic treatment indicates that baryons are not affected by the creation process but this is not the case for dark matter. Both components evolve together at early phases but lately the dark matter density contrast decreases since the background tends to a constant value. This behaviour produces a negative growth factor, in disagreement with observations, being a further problem for this cosmology.« less

Particle creation phenomenology, Dirac sea and the induced Weyl and Einstein-dilaton gravity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berezin, V.A.; Dokuchaev, V.I.; Eroshenko, Yu.N., E-mail: berezin@inr.ac.ru, E-mail: dokuchaev@inr.ac.ru, E-mail: eroshenko@inr.ac.ru

We constructed the conformally invariant model for scalar particle creation induced by strong gravitational fields. Starting from the 'usual' hydrodynamical description of the particle motion written in the Eulerian coordinates we substituted the particle number conservation law (which enters the formalism) by 'the particle creation law', proportional to the square of the Weyl tensor (following the famous result by Ya.B. Zel'dovich and A.A. Starobinsky). Then, demanding the conformal invariance of the whole dynamical system, we have got both the (Weyl)-conformal gravity and the Einstein-Hilbert gravity action integral with dilaton field. Thus, we obtained something like the induced gravity suggested firstmore » by A.D. Sakharov. It is shown that the resulting system is self-consistent. We considered also the vacuum equations. It is shown that, beside the 'empty vacuum', there may exist the 'dynamical vacuum', which is nothing more but the Dirac sea. The latter is described by the unexpectedly elegant equation which includes both the Bach and Einstein tensors and the cosmological terms.« less

Particle Analysis Pitfalls

NASA Technical Reports Server (NTRS)

Hughes, David; Dazzo, Tony

2007-01-01

This viewgraph presentation reviews the use of particle analysis to assist in preparing for the 4th Hubble Space Telescope (HST) Servicing mission. During this mission the Space Telescope Imaging Spectrograph (STIS) will be repaired. The particle analysis consisted of Finite element mesh creation, Black-body viewfactors generated using I-DEAS TMG Thermal Analysis, Grey-body viewfactors calculated using Markov method, Particle distribution modeled using an iterative Monte Carlo process, (time-consuming); in house software called MASTRAM, Differential analysis performed in Excel, and Visualization provided by Tecplot and I-DEAS. Several tests were performed and are reviewed: Conformal Coat Particle Study, Card Extraction Study, Cover Fastener Removal Particle Generation Study, and E-Graf Vibration Particulate Study. The lessons learned during this analysis are also reviewed.

Particle creation in (2+1) circular dust collapse

NASA Astrophysics Data System (ADS)

Gutti, Sashideep; Singh, T. P.

2007-09-01

We investigate the quantum particle creation during the circularly symmetric collapse of a 2+1 dust cloud, for the cases when the cosmological constant is either zero or negative. We derive the Ford-Parker formula for the 2+1 case, which can be used to compute the radiated quantum flux in the geometric optics approximation. It is shown that no particles are created when the collapse ends in a naked singularity, unlike in the 3+1 case. When the collapse ends in a Banados-Teitelboim-Zanelli black hole, we recover the expected Hawking radiation.

Can particle-creation phenomena replace dark energy?

NASA Astrophysics Data System (ADS)

Debnath, Subhra; Sanyal, Abhik Kumar

2011-07-01

Particle creation at the expense of the gravitational field might be sufficient to explain the cosmic evolution history, without the need of dark energy at all. This phenomena has been investigated in a recent work by Lima et al (Class. Quantum Grav. 2008 25 205006) assuming particle creation at the cost of gravitational energy in the late Universe. However, the model does not satisfy the WMAP constraint on the matter-radiation equality (Steigman et al 2009 J. Cosmol. Astropart. Phys. JCAP06(2009)033). Here, we have suggested a model, in the same framework, which fits perfectly with SNIa data at low redshift as well as an early integrated Sachs-Wolfe effect on the matter-radiation equality determined by WMAP at high redshift. Such a model requires the presence of nearly 26% primeval matter in the form of baryons and cold dark matter.

Universe creation from the third-quantized vacuum

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGuigan, M.

1989-04-15

Third quantization leads to a Hilbert space containing a third-quantized vacuum in which no universes are present as well as multiuniverse states. We consider the possibility of universe creation for the special case where the universe emerges in a no-particle state. The probability of such a creation is computed from both the path-integral and operator formalisms.

Universe creation from the third-quantized vacuum

NASA Astrophysics Data System (ADS)

McGuigan, Michael

1989-04-01

Third quantization leads to a Hilbert space containing a third-quantized vacuum in which no universes are present as well as multiuniverse states. We consider the possibility of universe creation for the special case where the universe emerges in a no-particle state. The probability of such a creation is computed from both the path-integral and operator formalisms.

Tunneling method for Hawking radiation in the Nariai case

NASA Astrophysics Data System (ADS)

Belgiorno, F.; Cacciatori, S. L.; Dalla Piazza, F.

2017-08-01

We revisit the tunneling picture for the Hawking effect in light of the charged Nariai manifold, because this general relativistic solution, which displays two horizons, provides the bonus to allow the knowledge of exact solutions of the field equations. We first perform a revisitation of the tunneling ansatz in the framework of particle creation in external fields à la Nikishov, which corroborates the interpretation of the semiclassical emission rate Γ_{emission} as the conditional probability rate for the creation of a couple of particles from the vacuum. Then, particle creation associated with the Hawking effect on the Nariai manifold is calculated in two ways. On the one hand, we apply the Hamilton-Jacobi formalism for tunneling, in the case of a charged scalar field on the given background. On the other hand, the knowledge of the exact solutions for the Klein-Gordon equations on Nariai manifold, and their analytic properties on the extended manifold, allow us a direct computation of the flux of particles leaving the horizon, and, as a consequence, we obtain a further corroboration of the semiclassical tunneling picture from the side of S-matrix formalism.

Creation, Phase Change and Evolution of the Universe Based on the "Convection Bang Hypothesis"

NASA Astrophysics Data System (ADS)

Gholibeigian, Hassan; Amirshahkarami, Abdolazim; Gholibeigian, Kazem

2016-04-01

In our vision, it is believed that creation and phase change of universe and their coupling began by the gigantic Large Scale Forced Convection System (LSFCS) in very high temperature including a swirling wild wind and energetic particles like gravitons. That wind as the creator of the inflation process was carrying many Quantum Convection Loops (QCLs). Those QCLs have been transformed to black holes as the cores of galaxies. Convection Bang (CB) Model for creation, phase change and evolution of the Universe is constituted based on three assumptions as follows: The first is: "Gravity Hypothesis" that describes the gravity fields generation by the LSFCSs of the heat and mass inside the planets, stars, galaxies and clusters. The LSFCS changes the material properties of the domain and produces coupling of the matched electromagnetic and gravity fields. Gravity hypothesis is a new way to understand gravitation phenomenon which is different from the both Newton's law of gravity and Einstein's theory of general relativity approaches [Gholibeigian et. al, AGU Fall Meeting 2015, P11A-2056 ]. The second is: "Substantial Motion" theory of Iranian philosopher, Mulla Sadra (1571/2-1640), which describes space-time, time's relativity for all atoms (bodies) which are different from each other [Gholibeigian, APS April Meeting 2015, abstract #L1.027], atom's (body) volume squeezing, black hole's mass lightening while increases the velocities of its involved masses inward (a paradox with general relativity), and changes of material properties and geometries in speed of near light speed [Gholibeigian, APS March Meeting 2016, abstract #]. The third is: "Animated Sub-particles" model. These sub-particles (sub-strings) are origin of life and creator of the momentums of the fundamental particles and forces, and basic link of the information transfer to them, [Gholibeigian, APS April Meeting 2015, abstract #L1.027]. In this model, there are four proposed animated sub-particles of mater, plant, animal and human in substructure of each fundamental particle (string) as the origins of life and cause of differences between their spins. Material's sub-particle is always on and active (from beginning of CB). When the environmental conditions became ready for creation of each field of the plants, animals and humans, sub-particles of their elementary particles became on and active and then, those elementary particles participated in processes of creation (phase change) in their own fields. Sub-particles lead the fundamental particles in both individually and systematic (nucleons, atoms, molecules, gens, us...) forms. Sub-particles' system is inside of particles' (bodies)' system. Mechanism: Universe has been managed by coupling of these three assumptions in two micro and macro coupling scales. God, as the main source of information, has been communicated with sub-particles and transfers a package (bit) of information and laws (plus standard ethics for human's sub-particles) to each of them from their inside and outside for process and selection (mutation) of the next step of the motion (phase change) and coupling/communication of their fundamental particles with each other in each Plank's time (or smaller scale). This process is causality for particles' motion in quantum scale too [Gholibeigian, APS March Meeting 2015, abstract #V1.023].

Exotic quantum effects in the laboratory?

PubMed

Schützhold, Ralf

2008-08-28

This article provides a brief (non-exhaustive) review of some recent developments regarding the theoretical and possibly experimental study of 'exotic' quantum effects in the laboratory with special emphasis on cosmological particle creation, Hawking radiation and the Unruh effect.

Evidence for cosmological particle creation?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pigozzo, C.; Carneiro, S.; Borges, H.A.

2016-05-01

A joint analysis of the linear matter power spectrum, distance measurements from type Ia supernovae and the position of the first peak in the anisotropy spectrum of the cosmic microwave background indicates a cosmological, late-time dark matter creation at 95% confidence level.

Forces in inhomogeneous open active-particle systems.

PubMed

Razin, Nitzan; Voituriez, Raphael; Elgeti, Jens; Gov, Nir S

2017-11-01

We study the force that noninteracting pointlike active particles apply to a symmetric inert object in the presence of a gradient of activity and particle sources and sinks. We consider two simple patterns of sources and sinks that are common in biological systems. We analytically solve a one-dimensional model designed to emulate higher-dimensional systems, and study a two-dimensional model by numerical simulations. We specify when the particle flux due to the creation and annihilation of particles can act to smooth the density profile that is induced by a gradient in the velocity of the active particles, and find the net resultant force due to both the gradient in activity and the particle flux. These results are compared qualitatively to observations of nuclear motion inside the oocyte, that is driven by a gradient in activity of actin-coated vesicles.

Four different animated sub-particles as the origins of the life and creator of different angular momentums of elementary particles

NASA Astrophysics Data System (ADS)

Gholibeigian, Hassan; Gholibeigian, Zeinab

2015-04-01

Understanding the internal structure of the proton is crucial challenge for QCD, and one important aspect of this is to understand how the spin of the nucleon is build-up from the angular momentum of its quarks and gluons. In this way, what's the origin of differences between angular momentums of fundamental particles? It may be from their substructures. It seems there are four sub-particles of mater, plant, animal and human in substructure of each fundamental particle (string) as the origins of life and cause of differences between spins of those elementary particles. Material's sub-particle always is on and active. When the environmental conditions became ready for creation of each field of the plant, animal and human, sub-particles of their elementary particles became on and active and then, those elementary particles participated in processes of creation in their own field. God, as the main source of information, has been communicated with their sub-particles and transfers a package (bit) of information and laws (plus standard ethics for human sub-particles) to each of them for process and selection (mutation) of the next step of motion and interaction of their fundamental particles with each other in each Plank's time. This is causality for particles' motion in quantum area.

Discontinuous non-equilibrium phase transition in a threshold Schloegl model for autocatalysis: Generic two-phase coexistence and metastability

DOE PAGES

Wang, Chi -Jen; Liu, Da -Jiang; Evans, James W.

2015-04-28

Threshold versions of Schloegl’s model on a lattice, which involve autocatalytic creation and spontaneous annihilation of particles, can provide a simple prototype for discontinuous non-equilibrium phase transitions. These models are equivalent to so-called threshold contact processes. A discontinuous transition between populated and vacuum states can occur selecting a threshold of N ≥ 2 for the minimum number, N, of neighboring particles enabling autocatalytic creation at an empty site. Fundamental open questions remain given the lack of a thermodynamic framework for analysis. For a square lattice with N = 2, we show that phase coexistence occurs not at a unique valuemore » but for a finite range of particle annihilation rate (the natural control parameter). This generic two-phase coexistence also persists when perturbing the model to allow spontaneous particle creation. Such behavior contrasts both the Gibbs phase rule for thermodynamic systems and also previous analysis for this model. We find metastability near the transition corresponding to a non-zero effective line tension, also contrasting previously suggested critical behavior. As a result, mean-field type analysis, extended to treat spatially heterogeneous states, further elucidates model behavior.« less

Discontinuous non-equilibrium phase transition in a threshold Schloegl model for autocatalysis: Generic two-phase coexistence and metastability

NASA Astrophysics Data System (ADS)

Wang, Chi-Jen; Liu, Da-Jiang; Evans, James W.

2015-04-01

Threshold versions of Schloegl's model on a lattice, which involve autocatalytic creation and spontaneous annihilation of particles, can provide a simple prototype for discontinuous non-equilibrium phase transitions. These models are equivalent to so-called threshold contact processes. A discontinuous transition between populated and vacuum states can occur selecting a threshold of N ≥ 2 for the minimum number, N, of neighboring particles enabling autocatalytic creation at an empty site. Fundamental open questions remain given the lack of a thermodynamic framework for analysis. For a square lattice with N = 2, we show that phase coexistence occurs not at a unique value but for a finite range of particle annihilation rate (the natural control parameter). This generic two-phase coexistence also persists when perturbing the model to allow spontaneous particle creation. Such behavior contrasts both the Gibbs phase rule for thermodynamic systems and also previous analysis for this model. We find metastability near the transition corresponding to a non-zero effective line tension, also contrasting previously suggested critical behavior. Mean-field type analysis, extended to treat spatially heterogeneous states, further elucidates model behavior.

Statefinder diagnostic for modified Chaplygin gas cosmology in f(R,T) gravity with particle creation

NASA Astrophysics Data System (ADS)

Singh, J. K.; Nagpal, Ritika; Pacif, S. K. J.

In this paper, we have studied flat Friedmann-Lemaître-Robertson-Walker (FLRW) model with modified Chaplygin gas (MCG) having equation of state pm = Aρ ‑ B ργ, where 0 ≤ A ≤ 1, 0 ≤ γ ≤ 1 and B is any positive constant in f(R,T) gravity with particle creation. We have considered a simple parametrization of the Hubble parameter H in order to solve the field equations and discussed the time evolution of different cosmological parameters for some obtained models showing unique behavior of scale factor. We have also discussed the statefinder diagnostic pair {r,s} that characterizes the evolution of obtained models and explore their stability. The physical consequences of the models and their kinematic behaviors have also been scrutinized here in some detail.

Feynman Diagrams as Metaphors: Borrowing the Particle Physicist's Imagery for Science Communication Purposes

ERIC Educational Resources Information Center

Pascolini, A.; Pietroni, M.

2002-01-01

We report on an educational project in particle physics based on Feynman diagrams. By dropping the mathematical aspect of the method and keeping just the iconic one, it is possible to convey many different concepts from the world of elementary particles, such as antimatter, conservation laws, particle creation and destruction, real and virtual…

The Moment of Creation.

ERIC Educational Resources Information Center

Schechter, Bruce

1983-01-01

Physicists at the European Organization for Nuclear Research discovered W particles using a giant particle accelerator. Existence of the particles confirms a 15-year-old theory about the nature of the universe, proving that electromagnetic and weak forces are related and raising hopes for a comprehensive theory which includes the strong force. (JN)

Salting out of methane by sodium chloride: A scaled particle theory study.

PubMed

Graziano, Giuseppe

2008-08-28

The salting out of methane by adding NaCl to water at 25 degrees C and 1 atm is investigated by calculating the work of cavity creation by means of scaled particle theory and the methane-solvent energy of attraction. The latter quantity changes to little extent on passing from pure water to an aqueous 4M NaCl solution, whereas the magnitude of the work of cavity creation increases significantly, accounting for the salting out effect. There is quantitative agreement between the experimental values of the hydration Gibbs energy and the calculated ones. The behavior of the work of cavity creation is due to the increase in the volume packing density of NaCl solutions, since the average effective molecular diameter does not change, being always 2.80 A. The same approach allows the rationalization of the difference in methane salting out along the alkali chloride series. These results indicate that, fixed the aqueous solution density, the solubility of nonpolar species is mainly determined by the effective diameter of solvent molecules and the corresponding volume packing density. There is no need to take into account the H-bond rearrangement because it is characterized by an almost complete enthalpy-entropy compensation.

Current Flow and Pair Creation at Low Altitude in Rotation-Powered Pulsars' Force-Free Magnetospheres: Space Charge Limited Flow

NASA Technical Reports Server (NTRS)

Timokhin, A. N.; Arons, J.

2013-01-01

We report the results of an investigation of particle acceleration and electron-positron plasma generation at low altitude in the polar magnetic flux tubes of rotation-powered pulsars, when the stellar surface is free to emit whatever charges and currents are demanded by the force-free magnetosphere. We apply a new 1D hybrid plasma simulation code to the dynamical problem, using Particle-in-Cell methods for the dynamics of the charged particles, including a determination of the collective electrostatic fluctuations in the plasma, combined with a Monte Carlo treatment of the high-energy gamma-rays that mediate the formation of the electron-positron pairs.We assume the electric current flowing through the pair creation zone is fixed by the much higher inductance magnetosphere, and adopt the results of force-free magnetosphere models to provide the currents which must be carried by the accelerator. The models are spatially one dimensional, and designed to explore the physics, although of practical relevance to young, high-voltage pulsars. We observe novel behaviour (a) When the current density j is less than the Goldreich-Julian value (0 < j/j(sub GJ) < 1), space charge limited acceleration of the current carrying beam is mild, with the full Goldreich-Julian charge density comprising the charge densities of the beam and a cloud of electrically trapped particles with the same sign of charge as the beam. The voltage drops are of the order of mc(sup 2)/e, and pair creation is absent. (b) When the current density exceeds the Goldreich-Julian value (j/j(sub GJ) > 1), the system develops high voltage drops (TV or greater), causing emission of curvature gamma-rays and intense bursts of pair creation. The bursts exhibit limit cycle behaviour, with characteristic time-scales somewhat longer than the relativistic fly-by time over distances comparable to the polar cap diameter (microseconds). (c) In return current regions, where j/j(sub GJ) < 0, the system develops similar bursts of pair creation. These discharges are similar to those encountered in previous calculations by Timokhin of pair creation when the surface has a high work function and cannot freely emit charge. In cases (b) and (c), the intermittently generated pairs allow the system to simultaneously carry the magnetospherically prescribed currents and adjust the charge density and average electric field to force-free conditions. We also elucidate the conditions for pair creating beam flow to be steady (stationary with small fluctuations in the rotating frame), finding that such steady flows can occupy only a small fraction of the current density parameter space exhibited by the force-free magnetospheric model. The generic polar flow dynamics and pair creation are strongly time dependent. The model has an essential difference from almost all previous quantitative studies, in that we sought the accelerating voltage (with pair creation, when the voltage drops are sufficiently large; without, when they are small) as a function of the applied current.

Creation and Evolution of Particle Number Asymmetry in an Expanding Universe

NASA Astrophysics Data System (ADS)

Morozumi, T.; Nagao, K. I.; Adam, A. S.; Takata, H.

2017-03-01

We introduce a model which may generate particle number asymmetry in an expanding Universe. The model includes charge parity (CP) violating and particle number violating interactions. The model consists of a real scalar field and a complex scalar field. Starting with an initial condition specified by a density matrix, we show how the asymmetry is created through the interaction and how it evolves at later time. We compute the asymmetry using non-equilibrium quantum field theory and as a first test of the model, we study how the asymmetry evolves in the flat limit.

Quasiparticle pair creation in unstable superflow

NASA Astrophysics Data System (ADS)

Elser, Veit

1995-06-01

Landau's instability mechanism in superflow is considered with special attention given to the role of nonuniformity in the flow. Linear stability analysis applied to the first in a series of approximate microscopic equations for the superfluid reveals a growth rate for Landau's instability proportional to the shear in the flow. In a quasiparticle description, the shear acts as a source of particle pair creation. The observation of roton-pair creation in experiments with electron bubbles in helium is offered as evidence of this phenomenon.

Creation of a bovine herpes virus 1 (BoHV-1) quantitative particle standard by transmission electron microscopy and comparison with established standards for use in real-time PCR.

PubMed

Hoferer, Marc; Braun, Anne; Sting, Reinhard

2017-07-01

Standards are pivotal for pathogen quantification by real-time PCR (qPCR); however, the creation of a complete and universally applicable virus particle standard is challenging. In the present study a procedure based on purification of bovine herpes virus type 1 (BoHV-1) and subsequent quantification by transmission electron microscopy (TEM) is described. Accompanying quantitative quality controls of the TEM preparation procedure using qPCR yielded recovery rates of more than 95% of the BoHV-1 virus particles on the grid used for virus counting, which was attributed to pre-treatment of the grid with 5% bovine albumin. To compare the value of the new virus particle standard for use in qPCR, virus counter based quantification and established pure DNA standards represented by a plasmid and an oligonucleotide were included. It could be shown that the numbers of virus particles, plasmid and oligonucleotide equivalents were within one log10 range determined on the basis of standard curves indicating that different approaches provide comparable quantitative values. However, only virus particles represent a complete, universally applicable quantitative virus standard that meets the high requirements of an RNA and DNA virus gold standard. In contrast, standards based on pure DNA have to be considered as sub-standard due to limited applications. Copyright © 2017 International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

In situ creation of reactive polymer nanoparticles and resulting polymer layers formed at the interfaces of liquid crystals (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kang, Shin-Woong; Kundu, Sudarshan; Park, Heung-Shik; Oh, Keun Chan; Lyu, Jae Jin

2017-02-01

We report the in situ creation of reactive polymer nanoparticles and resulting polymer networks formed at the interfaces of liquid crystals. It is known that polymerization-induced phase separation proceeds in two distinct regimes depending on the concentration of monomer. For a high monomer concentration, phase separation occurs mainly through the spinodal decomposition process, consequently resulting in interpenetrating polymer networks. For a dilute system, however, the phase separation mainly proceeds and completes in the binodal decomposition regime. The system resembles the aggregation process of colloidal particle. In this case, the reaction kinetics is limited by the reaction between in situ created polymer aggregates and hence the network morphologies are greatly influenced by the diffusion of reactive polymer particles. The thin polymer layers localized at the surface of substrate are inevitably observed and can be comprehended by the interfacial adsorption and further cross-linking reaction of reactive polymer aggregates at the interface. This process provides a direct perception on understanding polymer stabilized liquid crystals accomplished by the interfacial polymer layer. The detailed study has been performed for an extremely dilute condition (below 0.5 wt%) by employing systematic experimental approaches. Creation and growth of polymer nanoparticles have been measured by particle size analyzer. The interfacial localization of polymer aggregates and resulting interfacial layer formation with a tens of nanometer scale have been exploited at various interfaces such as liquid-solid, liquid-liquid, and liquid-gas interfaces. The resulting interfacial layers have been characterized by using fuorescent confocal microscope and field emission scanning electron microscope. The detailed processes of the polymer stabilized vertically aligned liquid crystals will be discussed in support of the reported study.

Current flow and pair creation at low altitude in rotation-powered pulsars' force-free magnetospheres: space charge limited flow

NASA Astrophysics Data System (ADS)

Timokhin, A. N.; Arons, J.

2013-02-01

We report the results of an investigation of particle acceleration and electron-positron plasma generation at low altitude in the polar magnetic flux tubes of rotation-powered pulsars, when the stellar surface is free to emit whatever charges and currents are demanded by the force-free magnetosphere. We apply a new 1D hybrid plasma simulation code to the dynamical problem, using Particle-in-Cell methods for the dynamics of the charged particles, including a determination of the collective electrostatic fluctuations in the plasma, combined with a Monte Carlo treatment of the high-energy gamma-rays that mediate the formation of the electron-positron pairs. We assume the electric current flowing through the pair creation zone is fixed by the much higher inductance magnetosphere, and adopt the results of force-free magnetosphere models to provide the currents which must be carried by the accelerator. The models are spatially one dimensional, and designed to explore the physics, although of practical relevance to young, high-voltage pulsars. We observe novel behaviour (a) When the current density j is less than the Goldreich-Julian value (0 < j/jGJ < 1), space charge limited acceleration of the current carrying beam is mild, with the full Goldreich-Julian charge density comprising the charge densities of the beam and a cloud of electrically trapped particles with the same sign of charge as the beam. The voltage drops are of the order of mc2/e, and pair creation is absent. (b) When the current density exceeds the Goldreich-Julian value (j/jGJ > 1), the system develops high voltage drops (TV or greater), causing emission of curvature gamma-rays and intense bursts of pair creation. The bursts exhibit limit cycle behaviour, with characteristic time-scales somewhat longer than the relativistic fly-by time over distances comparable to the polar cap diameter (microseconds). (c) In return current regions, where j/jGJ < 0, the system develops similar bursts of pair creation. These discharges are similar to those encountered in previous calculations by Timokhin of pair creation when the surface has a high work function and cannot freely emit charge. In cases (b) and (c), the intermittently generated pairs allow the system to simultaneously carry the magnetospherically prescribed currents and adjust the charge density and average electric field to force-free conditions. We also elucidate the conditions for pair creating beam flow to be steady (stationary with small fluctuations in the rotating frame), finding that such steady flows can occupy only a small fraction of the current density parameter space exhibited by the force-free magnetospheric model. The generic polar flow dynamics and pair creation are strongly time dependent. The model has an essential difference from almost all previous quantitative studies, in that we sought the accelerating voltage (with pair creation, when the voltage drops are sufficiently large; without, when they are small) as a function of the applied current. The 1D results described here characterize the dependence of acceleration and pair creation on the magnitude and sign of current. The dependence on the spatial distribution of the current is a multi-dimensional problem, possibly exhibiting more chaotic behaviour. We briefly outline possible relations of the electric field fluctuations observed in the polar flows (both with and without pair creation discharges) to direct emission of radio waves, as well as revive the possible relation of the observed limit cycle behaviour to microstructure in the radio emission. Actually modelling these effects requires the multi-dimensional treatment, to be reported in a later paper.

Plasma etched surface scanning inspection recipe creation based on bidirectional reflectance distribution function and polystyrene latex spheres

NASA Astrophysics Data System (ADS)

Saldana, Tiffany; McGarvey, Steve; Ayres, Steve

2014-04-01

The continual increasing demands upon Plasma Etching systems to self-clean and continue Plasma Etching with minimal downtime allows for the examination of SiCN, SiO2 and SiN defectivity based upon Surface Scanning Inspection Systems (SSIS) wafer scan results. Historically all Surface Scanning Inspection System wafer scanning recipes have been based upon Polystyrene Spheres wafer deposition for each film stack and the subsequent creation of light scattering sizing response curves. This paper explores the feasibility of the elimination of Polystyrene Latex Sphere (PSL) and/or process particle deposition on both filmed and bare Silicon wafers prior to Surface Scanning Inspection System recipe creation. The study will explore the theoretical maximal Surface Scanning Inspection System sensitivity based on PSL recipe creation in conjunction with the maximal sensitivity derived from Bidirectional Reflectance Distribution Function (BRDF) maximal sensitivity modeling recipe creation. The surface roughness (Root Mean Square) of plasma etched wafers varies dependent upon the process film stack. Decrease of the root mean square value of the wafer sample surface equates to higher surface scanning inspection system sensitivity. Maximal sensitivity SSIS scan results from bare and filmed wafers inspected with recipes created based upon Polystyrene/Particle Deposition and recipes created based upon BRDF modeling will be overlaid against each other to determine maximal sensitivity and capture rate for each type of recipe that was created with differing recipe creation modes. A statistically valid sample of defects from each Surface Scanning Inspection system recipe creation mode and each bare wafer/filmed substrate will be reviewed post SSIS System processing on a Defect Review Scanning Electron Microscope (DRSEM). Native defects, Polystyrene Latex Spheres will be collected from each statistically valid defect bin category/size. The data collected from the DRSEM will be utilized to determine the maximum sensitivity capture rate for each recipe creation mode. Emphasis will be placed upon the sizing accuracy of PSL versus BRDF modeling results based upon automated DRSEM defect sizing. An examination the scattering response for both Mie and Rayleigh will be explored in relationship to the reported sizing variance of the SSIS to make a determination of the absolute sizing accuracy of the recipes there were generated based upon BRDF modeling. This paper explores both the commercial and technical considerations of the elimination of PSL deposition as a precursor to SSIS recipe creation. Successful integration of BRDF modeling into the technical aspect of SSIS recipe creation process has the potential to dramatically reduce the recipe creation timeline and vetting period. Integration of BRDF modeling has the potential to greatly reduce the overhead operation costs for High Volume Manufacturing sites by eliminating the associated costs of third party PSL deposition.

Vulnerability of Space Station Freedom Modules: A Study of the Effects of Module Perforation on Crew and Equipment. Volume 2; Analytical Modeling of Internal Debris Cloud Effects

NASA Technical Reports Server (NTRS)

Schonberg, William P.; Davenport, Quint

1995-01-01

In this part of the report, a first-principles based model is developed to predict the overpressure and temperature effects of a perforating orbital debris particle impact within a pressurized habitable module. While the effects of a perforating debris particles on crew and equipment can be severe, only a limited number of empirical studies focusing on space vehicles have been performed to date. Traditionally, crew loss or incapacitation due to a perforating impact has primarily been of interest to military organizations and as such have focused on military vehicles and systems. The module wall considered in this study is initially assumed to be a standard Whippletype dual-wall system in which the outer wall protects the module and its inhabitants by disrupting impacting particles. The model is developed in a way such that it sequentially characterizes the phenomena comprising the impact event, including the initial impact, the creation and motion of a debris cloud within the dual-wall system, the impact of the debris cloud on the inner wall, the creation and motion of the debris cloud that enters the module interior, and the effects of the debris cloud within the module on module pressure and temperature levels. This is accomplished through the application of elementary shock physics and thermodynamic theory.

Particle creation and non-equilibrium thermodynamical prescription of dark fluids for universe bounded by an event horizon

NASA Astrophysics Data System (ADS)

Saha, Subhajit; Biswas, Atreyee; Chakraborty, Subenoy

2015-03-01

In the present work, flat FRW model of the universe is considered to be an isolated open thermodynamical system where non-equilibrium prescription has been studied using the mechanism of particle creation. In the perspective of recent observational evidences, the matter distribution in the universe is assumed to be dominated by dark matter and dark energy. The dark matter is chosen as dust while for dark energy, the following choices are considered: (i) Perfect fluid with constant equation of state and (ii) Holographic dark energy. In both the cases, the validity of generalized second law of thermodynamics (GSLT) which states that the total entropy of the fluid as well as that of the horizon should not decrease with the evolution of the universe, has been examined graphically for universe bounded by the event horizon. It is found that GSLT holds in both the cases with some restrictions on the interacting coupling parameter.

Adaptive numerical algorithms to simulate the dynamical Casimir effect in a closed cavity with different boundary conditions

NASA Astrophysics Data System (ADS)

Villar, Paula I.; Soba, Alejandro

2017-07-01

We present an alternative numerical approach to compute the number of particles created inside a cavity due to time-dependent boundary conditions. The physical model consists of a rectangular cavity, where a wall always remains still while the other wall of the cavity presents a smooth movement in one direction. The method relies on the setting of the boundary conditions (Dirichlet and Neumann) and the following resolution of the corresponding equations of modes. By a further comparison between the ground state before and after the movement of the cavity wall, we finally compute the number of particles created. To demonstrate the method, we investigate the creation of particle production in vibrating cavities, confirming previously known results in the appropriate limits. Within this approach, the dynamical Casimir effect can be investigated, making it possible to study a variety of scenarios where no analytical results are known. Of special interest is, of course, the realistic case of the electromagnetic field in a three-dimensional cavity, with transverse electric (TE)-mode and transverse magnetic (TM)-mode photon production. Furthermore, with our approach we are able to calculate numerically the particle creation in a tuneable resonant superconducting cavity by the use of the generalized Robin boundary condition. We compare the numerical results with analytical predictions as well as a different numerical approach. Its extension to three dimensions is also straightforward.

Particle creation by naked singularities in higher dimensions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyamoto, Umpei; Nemoto, Hiroya; Shimano, Masahiro

Recently, the possibility was pointed out by one of the present authors and his collaborators that an effective naked singularity referred to as ''a visible border of spacetime'' is generated by high-energy particle collision in the context of large extra dimensions or TeV-scale gravity. In this paper, we investigate the particle creation by a naked singularity in general dimensions, while adopting a model in which a marginally naked singularity forms in the collapse of a homothetic lightlike pressureless fluid. We find that the spectrum deviates from that of Hawking radiation due to scattering near the singularity but can be recastmore » in quasithermal form. The temperature is always higher than that of Hawking radiation of a same-mass black hole, and can be arbitrarily high depending on a parameter in the model. This implies that, in principle, the naked singularity may be distinguished from a black hole in collider experiments.« less

Quantum field between moving mirrors: A three dimensional example

NASA Technical Reports Server (NTRS)

Hacyan, S.; Jauregui, Roco; Villarreal, Carlos

1995-01-01

The scalar quantum field uniformly moving plates in three dimensional space is studied. Field equations for Dirichlet boundary conditions are solved exactly. Comparison of the resulting wavefunctions with their instantaneous static counterpart is performed via Bogolubov coefficients. Unlike the one dimensional problem, 'particle' creation as well as squeezing may occur. The time dependent Casimir energy is also evaluated.

Technologies for delivery of proton and ion beams for radiotherapy

NASA Astrophysics Data System (ADS)

Owen, Hywel; Holder, David; Alonso, Jose; Mackay, Ranald

2014-05-01

Recent developments for the delivery of proton and ion beam therapy have been significant, and a number of technological solutions now exist for the creation and utilisation of these particles for the treatment of cancer. In this paper we review the historical development of particle accelerators used for external beam radiotherapy and discuss the more recent progress towards more capable and cost-effective sources of particles.

Experimental study of dielectrophoresis and liquid dielectrophoresis mechanisms for particle capture in a droplet.

PubMed

Tsai, Sung-Lin; Hong, Jhih-Lin; Chen, Ming-Kun; Jang, Ling-Sheng

2011-06-01

This work presents a microfluidic system that can transport, concentrate, and capture particles in a controllable droplet. Dielectrophoresis (DEP), a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field, is used to manipulate particles. Liquid dielectrophoresis (LDEP), a phenomenon in which a liquid moves toward regions of high electric field strength under a non-uniform electric field, is used to manipulate the fluid. In this study, a mechanism of droplet creation presented in a previous work that uses DEP and LDEP is improved. A driving electrode with a DEP gap is used to prevent beads from getting stuck at the interface between air and liquid, which is actuated with an AC signal of 200 V(pp) at a frequency of 100 kHz. DEP theory is used to calculate the DEP force in the liquid, and LDEP theory is used to analyze the influence of the DEP gap. The increment of the actuation voltage due to the electrode with a DEP gap is calculated. A set of microwell electrodes is used to capture a bead using DEP force, which is actuated with an AC signal of 20 V(pp) at a frequency of 5 MHz. A simulation is carried out to investigate the dimensions of the DEP gap and microwell electrodes. Experiments are performed to demonstrate the creation of a 100-nL droplet and the capture of individual 10-μm polystyrene latex beads in the droplet. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Particle-hole symmetry in many-body theories of electron correlation

NASA Astrophysics Data System (ADS)

Kats, Daniel; Usvyat, Denis; Manby, Frederick R.

2018-06-01

Second-quantised creation and annihilation operators for fermionic particles anticommute, but the same is true for the creation and annihilation operators for holes. This introduces a symmetry into the quantum theory of fermions that is absent for bosons. In ab initio electronic structure theory, it is common to classify methods by the number of electrons for which the method returns exact results: for example Hartree-Fock theory is exact for one-electron systems, whereas coupled-cluster theory with single and double excitations is exact for two-electron systems. Here, we discuss the generalisation: methods based on approximate wavefunctions that are exact for n-particle systems are also exact for n-hole systems. Novel electron correlation methods that attempt to improve on the coupled-cluster framework sometimes retain this property, and sometimes lose it. Here, we argue for retaining particle-hole symmetry as a desirable design criterion of approximate electron correlation methods. Dispensing with it might lead to loss of n-representability of density matrices, and this in turn can lead to spurious long-range behaviour in the correlation energy.

Quantum paradoxes, entanglement and their explanation on the basis of quantization of fields

NASA Astrophysics Data System (ADS)

Melkikh, A. V.

2017-01-01

Quantum entanglement is discussed as a consequence of the quantization of fields. The inclusion of quantum fields self-consistently explains some quantum paradoxes (EPR and Hardy’s paradox). The definition of entanglement was introduced, which depends on the maximum energy of the interaction of particles. The destruction of entanglement is caused by the creation and annihilation of particles. On this basis, an algorithm for quantum particle evolution was formulated.

Resonance controlled transport in phase space

NASA Astrophysics Data System (ADS)

Leoncini, Xavier; Vasiliev, Alexei; Artemyev, Anton

2018-02-01

We consider the mechanism of controlling particle transport in phase space by means of resonances in an adiabatic setting. Using a model problem describing nonlinear wave-particle interaction, we show that captures into resonances can be used to control transport in momentum space as well as in physical space. We design the model system to provide creation of a narrow peak in the distribution function, thus producing effective cooling of a sub-ensemble of the particles.

EVALUATION OF THE SMPS-APS SYSTEM AS A CONTINUOUS MONITOR FOR MEASURING PM2.5, PM10 AND COARSE (PM2.5-10) CONCENTRATIONS. (R827352C011)

EPA Science Inventory

Respirable particulate matter (PM) has been linked to mortality and morbidity by a variety of epidemiological studies. This research has led to the creation of a new PM standard for particles with diameters <2.5 μm (PM_2.5). Since the conclusion of these studie...

Field signature for apparently superluminal particle motion

NASA Astrophysics Data System (ADS)

Land, Martin

2015-05-01

In the context of Stueckelberg's covariant symplectic mechanics, Horwitz and Aharonovich [1] have proposed a simple mechanism by which a particle traveling below light speed almost everywhere may exhibit a transit time that suggests superluminal motion. This mechanism, which requires precise measurement of the particle velocity, involves a subtle perturbation affecting the particle's recorded time coordinate caused by virtual pair processes. The Stueckelberg framework is particularly well suited to such problems, because it permits pair creation/annihilation at the classical level. In this paper, we study a trajectory of the type proposed by Horwitz and Aharonovich, and derive the Maxwell 4-vector potential associated with the motion. We show that the resulting fields carry a signature associated with the apparent superluminal motion, providing an independent test for the mechanism that does not require direct observation of the trajectory, except at the detector.

Bacteria and Composite Particles in the Glacier-Fed Systems of British Columbia and Alberta, Canada

NASA Astrophysics Data System (ADS)

Barrett, D. C.; Hodder, K. R.

2014-12-01

In controlled environments, bacteria and suspended sediment particles are linked via the creation of a composite structure ("bacteria-sediment associations"; BSA), with associated effects on size, density and hydrodynamics. However, the presence of these particles, and their corresponding effect on sedimentary processes is not well documented in many environments. Here, we compile field data from 20 glacier-fed systems in British Columbia and Alberta, Canada, to illustrate: 1) the presence, and (quantity) of bacteria-sediment associations; 2) the presence of in-situ composite particles and their associated settling velocities; 3) the simulated impact of bacteria-sediment associations on settling velocity via controlled manipulation in the laboratory. In general, a significant portion of the fine suspended sediment typical of these systems was associated with bacteria and/or present in a composite-form -- not as primary, individual particles. Four key findings include: 1) Along a 80 kilometre river transect, up to 40% of bacteria were associated with sediment particles; 2) Manipulation of bacteria concentration in the laboratory has revealed a positive relationship between sediment settling velocity, creation of composite particles and bacteria concentration; 3) Composite particles dominated the suspended sediment load among all 20 systems, especially for larger particles; and 4) Measurements reveal these composite particles are settling at rates significantly below that predicted by Stokes Law. The formation of composite particles is especially important in lakes where laminated sediments are used for paleoenvironmental reconstruction (varved), as bacteria can modulate the rate at which some of this sediment reaches the lake floor. These results highlight the importance of bacteria in Earth surface processes and, more specifically, the sediment dynamics within glacier-fed systems.

Nothing From Everything- A Unified Theory

NASA Astrophysics Data System (ADS)

Mehra, Vijay Kumar

2016-07-01

Nothing From Everything-A Unified Theory is a philosophical insight into principles of nature through principle of complementary spontaneity and principle of vertical continuity. This work is intended to explain various cosmological phenomena in light of behaviour of particles in range of their respective and relative speed of light. This theory explains creation of Universe from nothing or zero spacetime through scalar energy field collapsing into Higgs field resulting into giving mass to various particles. The energy particles taking origin from nothing while moving away from zero space-time would create space-time of their own order because energy/matter needs space to exist. The particles while moving away from zero space-time would end up in breaking symmetry of matter/energy at their mass infinity (highest possible mass of any particle, which is function of speed of spin). This break in symmetry would lead to curving of particles upon themselves and hence would lead to creation of antiparticles going back in time towards zero spacetime. Therefore the Universe could have been created by alternate layers of particles and antiparticles and also alternate layers of matter and antimatter with decelerating speed of light, which would lead to creation a closed and flat Universe. With increase in mass of Universe (creation of more and more Universe's matter from nothing), the gravitational force of Universe is bound to increase and hence with quantum by quantum increase in gravity, it would apply brakes on relative speed of photon/light out of its reference frame or designated space and hence speed of photon would decrease. If closed and flat Universe was created with decelerating speed of light, then such Universe is bound to contract back with accelerating speed of light which would have inverse impact on gravitational constant across various spacetime zones of Universe. And hence mass bodies would drift away spontaneously purely on basis and proportional to distance square between mass bodies with accelerating speed of light, but in actual such Universe would be contracting rather than expanding. Furthermore, this theory explains how particles (when moving away from zero space-time) acquire spin, whose force vector acts centrifugally and neutralizes the quantum gravitational force of particle which acts centripetally. While in case of antiparticles both spin force and gravitational force acts towards centre of particles and they are bound to create singularity of zero spacetime. This theory further explains motion of photon/anti-photon in light of space displacement. The time is nothing but is a measure of rate of space displacement. Where there is no space displacement, there is no time. Any force, like gravity, which acts against space displacement must act against time and hence such forces would lead to slowing of time. This theory further explains about curvature of space-time, relative existence of time orders across Universe, black holes including atomic black holes, other Universes, virtual Universe, time travel, existence of life on other planets, numbers of Universe which govern dynamics of Universe, quantum of Universe i.e. existence of particle-antiparticle in space-time and relation of particles with Higgs field, origin of spin and charge of particles, reason for uncertainty principle and Pauli's exclusion principle, space-time dimensions, and other relevant topics of Astrophysics and quantum Physics.

Acceleration of Particles Near Earth's Bow Shock

NASA Astrophysics Data System (ADS)

Sandroos, A.

2012-12-01

Collisionless shock waves, for example, near planetary bodies or driven by coronal mass ejections, are a key source of energetic particles in the heliosphere. When the solar wind hits Earth's bow shock, some of the incident particles get reflected back towards the Sun and are accelerated in the process. Reflected ions are responsible for the creation of a turbulent foreshock in quasi-parallel regions of Earth's bow shock. We present first results of foreshock macroscopic structure and of particle distributions upstream of Earth's bow shock, obtained with a new 2.5-dimensional self-consistent diffusive shock acceleration model. In the model particles' pitch angle scattering rates are calculated from Alfvén wave power spectra using quasilinear theory. Wave power spectra in turn are modified by particles' energy changes due to the scatterings. The new model has been implemented on massively parallel simulation platform Corsair. We have used an earlier version of the model to study ion acceleration in a shock-shock interaction event (Hietala, Sandroos, and Vainio, 2012).

Particle yields from numerical simulations

NASA Astrophysics Data System (ADS)

Homor, Marietta M.; Jakovác, Antal

2018-04-01

In this paper we use numerical field theoretical simulations to calculate particle yields. We demonstrate that in the model of local particle creation the deviation from the pure exponential distribution is natural even in equilibrium, and an approximate Tsallis-Pareto-like distribution function can be well fitted to the calculated yields, in accordance with the experimental observations. We present numerical simulations in the classical Φ4 model as well as in the SU(3) quantum Yang-Mills theory to clarify this issue.

Creation of the precision magnetic spectrometer SCAN-3

NASA Astrophysics Data System (ADS)

Afanasiev, S. V.; Anisimov, Yu. S.; Baldin, A. A.; Berlev, A. I.; Dryablov, D. K.; Dubinchik, B. V.; Elishev, A. F.; Fateev, O. V.; Igamkulov, Z. A.; Krechetov, Yu. F.; Kudashkin, I. V.; Kuznechov, S. N.; Malakhov, A. I.; Smirnov, V. A.; Shimansky, S. S.; Kliman, J.; Matousek, V.; Gmutsa, S.; Turzo, I.; Cruceru, I.; Cruceru, M.; Constantin, F.; Niolescu, G.; Ciolacu, L.; Paraipan, M.; Vokál, S.; Vrláková, J.; Baskov, V. A.; Lebedev, A. I.; L'vov, A. I.; Pavlyuchenko, L. N.; Polyansky, V. V.; Rzhanov, E. V.; Sidorin, S. S.; Sokol, G. A.; Glavanakov, I. V.; Tabachenko, A. N.; Jomurodov, D. M.; Bekmirzaev, R. N.; Ibadov, R. M.; Sultanov, M. U.

2017-03-01

The new JINR project [1] is aimed at studies of highly excited nuclear matter created in nuclei by a high-energy deuteron beam. The matter is studied through observation of its particular decay products - pairs of energetic particles with a wide opening angle, close to 180°. The new precision hybrid magnetic spectrometer SCAN-3 is to be built for detecting charged (π±, K±, p) and neutral (n) particles produced at the JINR Nuclotron internal target in dA collisions. One of the main and complex tasks is a study of low-energy ηA interaction and a search for η-bound states (η-mesic nuclei). Basic elements of the spectrometer and its characteristics are discussed in the article.

Quantum descriptions of singularities leading to pair creation. [of gravitons

NASA Technical Reports Server (NTRS)

Misner, C. W.

1974-01-01

A class of cosmological models is analyzed which provide a mathematically convenient (but idealized) description of a cosmological singularity that develops into a pair creation epoch and terminates in an adiabatic expansion with redshifting particle energies. This class of models was obtained by Gowdy (1971, 1974) as a set of exact solutions of the classical empty space Einstein equations describing inhomogeneous universes populated only by gravitational waves. It is shown that these models can be used to exhibit simplified models of quantized gravitational fields, and that a quantum description can be given arbitrarily near a cosmological singularity. Graviton pair creation occurs, and can be seen to convert anisotropic expansion rates into the energy of graviton pairs.

Geometry creation for MCNP by Sabrina and XSM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Riper, K.A.

The Monte Carlo N-Particle transport code MCNP is based on a surface description of 3-dimensional geometry. Cells are defined in terms of boolean operations on signed quadratic surfaces. MCNP geometry is entered as a card image file containing coefficients of the surface equations and a list of surfaces and operators describing cells. Several programs are available to assist in creation of the geometry specification, among them Sabrina and the new ``Smart Editor`` code XSM. We briefly describe geometry creation in Sabrina and then discuss XSM in detail. XSM is under development; our discussion is based on the state of XSMmore » as of January 1, 1994.« less

Creation of catalytically active particles from enzymes crosslinked with a natural bifunctional agent--homocysteine thiolactone.

PubMed

Stroylova, Yulia Y; Semenyuk, Pavel I; Asriyantz, Regina A; Gaillard, Cedric; Haertlé, Thomas; Muronetz, Vladimir I

2014-09-01

The current study describes an approach to creation of catalytically active particles with increased stability from enzymes by N-homocysteinylation, a naturally presented protein modification. Enzymatic activities and properties of two globular tetrameric enzymes glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and lactate dehydrogenase (LDH) were studied before and after N-homocysteinylation. Modification of these proteins concerns the accessible lysine residues and introduces an average of 2-2,5 homocysteine residues per protein monomer. Formation of a range of aggregates was observed for both enzymes, which assemble via formation of intermolecular noncovalent bonds and by disulfide bonds. It was demonstrated that both studied enzymes retain their catalytic activities on modification and the subsequent formation of oligomeric forms. At low concentrations of homocysteine thiolactone, modification of GAPDH leads not only to prevention of spontaneous inactivation but also increases thermal stability of this enzyme on heating to 80°C. A moderate reduction of the activity of GAPDH observed in case of its crosslinking with 50-fold excess of homocysteine thiolactone per lysine is probably caused by hindered substrate diffusion. Spherical particles of 100 nm and larger diameters were observed by transmission electron microscopy and atomic force microscope techniques after modification of GAPDH with different homocysteine thiolactone concentrations. In case of LDH, branched fibril-like aggregates were observed under the same conditions. Interestingly, crosslinked samples of both proteins were found to have reversible thermal denaturation profiles, indicating that modification with homocysteine thiolactone stabilizes the spatial structure of these enzymes. © 2014 Wiley Periodicals, Inc.

An Exactly Soluble Model for Hopping Particles Moving with Correlations Between States due to Exchange Sites

NASA Astrophysics Data System (ADS)

Zhao, Xian-Geng; Jia, Sue-Tang

1992-09-01

The motion of hopping particles on an infinite chain is investigated. The model is characterized by the correlations between states due to exchange sites. The analytic solutions for this system are discussed in general case. For some special cases, exact results are obtained with the help of explicit calculations of propagators and mean square displacement deviation. Both probability propagators for the creation and annihilation of two particles or for the deformation and formation of Frenkel excitons are indicated.

Entanglement between two spatially separated atomic modes

NASA Astrophysics Data System (ADS)

Lange, Karsten; Peise, Jan; Lücke, Bernd; Kruse, Ilka; Vitagliano, Giuseppe; Apellaniz, Iagoba; Kleinmann, Matthias; Tóth, Géza; Klempt, Carsten

2018-04-01

Modern quantum technologies in the fields of quantum computing, quantum simulation, and quantum metrology require the creation and control of large ensembles of entangled particles. In ultracold ensembles of neutral atoms, nonclassical states have been generated with mutual entanglement among thousands of particles. The entanglement generation relies on the fundamental particle-exchange symmetry in ensembles of identical particles, which lacks the standard notion of entanglement between clearly definable subsystems. Here, we present the generation of entanglement between two spatially separated clouds by splitting an ensemble of ultracold identical particles prepared in a twin Fock state. Because the clouds can be addressed individually, our experiments open a path to exploit the available entangled states of indistinguishable particles for quantum information applications.

Inflationary Quasiparticle Creation and Thermalization Dynamics in Coupled Bose-Einstein Condensates

NASA Astrophysics Data System (ADS)

Posazhennikova, Anna; Trujillo-Martinez, Mauricio; Kroha, Johann

2016-06-01

A Bose gas in a double-well potential, exhibiting a true Bose-Einstein condensate (BEC) amplitude and initially performing Josephson oscillations, is a prototype of an isolated, nonequilibrium many-body system. We investigate the quasiparticle (QP) creation and thermalization dynamics of this system by solving the time-dependent Keldysh-Bogoliubov equations. We find avalanchelike QP creation due to a parametric resonance between BEC and QP oscillations, followed by slow, exponential relaxation to a thermal state at an elevated temperature, controlled by the initial excitation energy of the oscillating BEC above its ground state. The crossover between the two regimes occurs because of an effective decoupling of the QP and BEC oscillations. This dynamics is analogous to elementary particle creation in models of the early universe. The thermalization in our setup occurs because the BEC acts as a grand canonical reservoir for the quasiparticle system.

Inflationary Quasiparticle Creation and Thermalization Dynamics in Coupled Bose-Einstein Condensates.

PubMed

Posazhennikova, Anna; Trujillo-Martinez, Mauricio; Kroha, Johann

2016-06-03

A Bose gas in a double-well potential, exhibiting a true Bose-Einstein condensate (BEC) amplitude and initially performing Josephson oscillations, is a prototype of an isolated, nonequilibrium many-body system. We investigate the quasiparticle (QP) creation and thermalization dynamics of this system by solving the time-dependent Keldysh-Bogoliubov equations. We find avalanchelike QP creation due to a parametric resonance between BEC and QP oscillations, followed by slow, exponential relaxation to a thermal state at an elevated temperature, controlled by the initial excitation energy of the oscillating BEC above its ground state. The crossover between the two regimes occurs because of an effective decoupling of the QP and BEC oscillations. This dynamics is analogous to elementary particle creation in models of the early universe. The thermalization in our setup occurs because the BEC acts as a grand canonical reservoir for the quasiparticle system.

ELECTRODYNAMICS OF AXISYMMETRIC PULSAR MAGNETOSPHERE WITH ELECTRON-POSITRON DISCHARGE: A NUMERICAL EXPERIMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Alexander Y.; Beloborodov, Andrei M., E-mail: amb@phys.columbia.edu

2014-11-01

We present the first self-consistent global simulations of pulsar magnetospheres with operating e {sup ±} discharge. We focus on the simple configuration of an aligned or anti-aligned rotator. The star is spun up from a zero (vacuum) state to a high angular velocity, and we follow the coupled evolution of its external electromagnetic field and plasma particles using the ''particle-in-cell'' method. A plasma magnetosphere begins to form through the extraction of particles from the star; these particles are accelerated by the rotation-induced electric field, producing curvature radiation and igniting e {sup ±} discharge. We follow the system evolution for severalmore » revolution periods, longer than required to reach a quasi-steady state. Our numerical experiment puts to test previous ideas for the plasma flow and gaps in the pulsar magnetosphere. We first consider rotators capable of producing pairs out to the light cylinder through photon-photon collisions. We find that their magnetospheres are similar to the previously obtained force-free solutions with a Y-shaped current sheet. The magnetosphere continually ejects e {sup ±} pairs and ions. Pair creation is sustained by a strong electric field along the current sheet. We observe powerful curvature and synchrotron emission from the current sheet, consistent with Fermi observations of gamma-ray pulsars. We then study pulsars that can only create pairs in the strong-field region near the neutron star, well inside the light cylinder. We find that both aligned and anti-aligned rotators relax to the ''dead'' state with suppressed pair creation and electric currents, regardless of the discharge voltage.« less

Ion distributions in the Earth's foreshock upstream from the bow shock

NASA Technical Reports Server (NTRS)

Fuselier, S. A.

1995-01-01

A variety of suprathermal and energetic ion distributions are found upstream from shocks. Some distributions, such as field-aligned beams, are generated directly at the shock either through reflection processes or through leakage from the hotter downstream region. Other distributions, such as intermediate distributions, evolve from these parent distributions through wave-particle interactions. This paper reviews our current understanding of the creation and evolution of suprathermal distributions at shocks. Examples of suprathermal ion distributions are taken from observations at the Earth's bow shock. Particular emphasis is placed on the creation of field-aligned beams and specularly reflected ion distributions and on the evolution of these distributions in the Earth's ion foreshock. However, the results from this heavily studied region are applicable to interplanetary shocks, bow shocks at other planets, and comets.

Substantiation of International Nanomaterials Security Group Creation

NASA Astrophysics Data System (ADS)

Sosnov, A.; Sadovnikov, S.; Panfilov, S.; Magarshak, Yu.

Nanotechnology has achieved the status as one of the critical R&D area. Scientists use the unique properties of atomic and molecular assemblages built at the nanometer scale. The ability to manipulate the physical, chemical, and biological properties of molecules and particles affords to design agents with set up properties. But the technology allows creating not only useful agents. Possible accidental or deliberate creation of new nanoparticles (NPs) with dangerous properties is highly probable minor product of progress in the new area. The article briefly describes some pathways in development and implementation of NPs for medicinal and the similar purposes. Some of NPs can effective facilitate and mask transport of various agents in various environments. Possible creation of new dangerous NPs (e.g. conjugates based on combination of extensively use NPs and chemical, biological and radioactive agents) as well as creation of brand new NPs and nanodevices with unique properties needs creation of international multidiscipline community for security evaluation of nanomaterials and technologies. The community will forecast possible dangerous unexpectedness in the field of nanoscale materials and devices and suggests rational pathways for prevention of the threats.

Fabrication and characterization of non-Brownian particle-based crystals.

PubMed

Lash, Melissa H; Fedorchak, Morgan V; Little, Steven R; McCarthy, Joseph J

2015-01-27

Particle-based crystals have been explored in the literature for applications in molecular electronics, photonics, sensors, and drug delivery. However, much of the research on these crystals has been focused on particles of nano- and submicrometer dimensions (so-called colloidal crystals) with limited attention directed toward building blocks with dimensions ranging from tens to hundreds of micrometers. This can be attributed, in part, to the fact that the underlying thermal effects in these larger systems typically cannot naturally overcome kinetic barriers at the meso- and macroscales so that many of the methods used for nanoscale particle assembly cannot be directly applied to larger components, as they become kinetically arrested in nonequilibrium states. In this work, ultrasonic agitation is being explored as a means of allowing large, non-Brownian microparticles (18-750 μm) to overcome the kinetic barriers to packing in the creation of close-packed, highly ordered, crystalline structures. In addition, we study how the energy input affects bulk particle behavior and describe several new ways to characterize particle-based crystals made from microparticles.

Numerical evaluation of the laser-pulse modification modes of the metal surface layer in the presence of a surface-active component in the melt

NASA Astrophysics Data System (ADS)

Popov, V. N.; Cherepanov, A. N.

2017-09-01

Numerical evaluation of the laser-pulse modification of a metal layer with refractory nano-size particles was done. The modes of the laser-pulse action promoting creation of the flows for homogeneous distribution of modifying particles in the melt were determined for various amounts of the surface-active admixture in the metal.

Creation of fully vectorized FORTRAN code for integrating the movement of dust grains in interplanetary environments

NASA Technical Reports Server (NTRS)

Colquitt, Walter

1989-01-01

The main objective is to improve the performance of a specific FORTRAN computer code from the Planetary Sciences Division of NASA/Johnson Space Center when used on a modern vectorizing supercomputer. The code is used to calculate orbits of dust grains that separate from comets and asteroids. This code accounts for influences of the sun and 8 planets (neglecting Pluto), solar wind, and solar light pressure including Poynting-Robertson drag. Calculations allow one to study the motion of these particles as they are influenced by the Earth or one of the other planets. Some of these particles become trapped just beyond the Earth for long periods of time. These integer period resonances vary from 3 orbits of the Earth and 2 orbits of the particles to as high as 14 to 13.

From creation and annihilation operators to statistics

NASA Astrophysics Data System (ADS)

Hoyuelos, M.

2018-01-01

A procedure to derive the partition function of non-interacting particles with exotic or intermediate statistics is presented. The partition function is directly related to the associated creation and annihilation operators that obey some specific commutation or anti-commutation relations. The cases of Gentile statistics, quons, Polychronakos statistics, and ewkons are considered. Ewkons statistics was recently derived from the assumption of free diffusion in energy space (Hoyuelos and Sisterna, 2016); an ideal gas of ewkons has negative pressure, a feature that makes them suitable for the description of dark energy.

Novel Discrete Element Method for 3D non-spherical granular particles.

NASA Astrophysics Data System (ADS)

Seelen, Luuk; Padding, Johan; Kuipers, Hans

2015-11-01

Granular materials are common in many industries and nature. The different properties from solid behavior to fluid like behavior are well known but less well understood. The main aim of our work is to develop a discrete element method (DEM) to simulate non-spherical granular particles. The non-spherical shape of particles is important, as it controls the behavior of the granular materials in many situations, such as static systems of packed particles. In such systems the packing fraction is determined by the particle shape. We developed a novel 3D discrete element method that simulates the particle-particle interactions for a wide variety of shapes. The model can simulate quadratic shapes such as spheres, ellipsoids, cylinders. More importantly, any convex polyhedron can be used as a granular particle shape. These polyhedrons are very well suited to represent non-rounded sand particles. The main difficulty of any non-spherical DEM is the determination of particle-particle overlap. Our model uses two iterative geometric algorithms to determine the overlap. The algorithms are robust and can also determine multiple contact points which can occur for these shapes. With this method we are able to study different applications such as the discharging of a hopper or silo. Another application the creation of a random close packing, to determine the solid volume fraction as a function of the particle shape.

Emergent Universe with Particle Production

NASA Astrophysics Data System (ADS)

Gangopadhyay, Sunandan; Saha, Anirban; Mukherjee, S.

2016-10-01

The possibility of an emergent universe solution to Einstein's field equations allowing for an irreversible creation of matter at the expense of the gravitational field is shown. With the universe being chosen as spatially flat FRW spacetime together with equation of state proposed in Mukherjee et al. (Class. Quant. Grav. 23, 6927, 2006), the solution exists when the ratio of the phenomenological matter creation rate to the number density times the Hubble parameter is a number β of the order of unity and independent of time. The thermodynamic behaviour is also determined for this solution. Interestingly, we also find that an emergent universe scenario is present with usual equation of state in cosmology when the matter creation rate is chosen to be a constant. More general class of emergent universe solutions are also discussed.

QED in a time-dependent double cavity and creation of entanglement between noninteracting atoms via quantum eraser technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cirone, Markus A.; Rzazewski, Kazimierz; Centrum Fizyki Teoretycznej, Polska Akademia Nauk, and College of Science, Al. Lotnikow 32/46, 02-668 Warsaw

1999-03-11

We discuss two striking features of quantum mechanics: The concepts of vacuum and of entanglement. We first study the radiation field inside a double cavity (a cavity which contains a reflecting mirror). If the mirror is rapidly removed, peculiar quantum phenomena, such as photon creation from vacuum and squeezing, occur. We discuss then a gedanken experiment which employs the double cavity to create entanglement between two atoms. The atoms cross the double cavity and interact with its two independent radiation fields. After the atoms leave the cavity, the mirror is suddenly removed. Measurement of the radiation field inside the cavitymore » can give rise to entanglement between the atoms. The method can be extended to an arbitrary number of atoms, providing thus an N-particle GHZ state.« less

Magnetic trapping of neutrons

PubMed

Huffman; Brome; Butterworth; Coakley; Dewey; Dzhosyuk; Golub; Greene; Habicht; Lamoreaux; Mattoni; McKinsey; Wietfeldt; Doyle

2000-01-06

Accurate measurement of the lifetime of the neutron (which is unstable to beta decay) is important for understanding the weak nuclear force and the creation of matter during the Big Bang. Previous measurements of the neutron lifetime have mainly been limited by certain systematic errors; however, these could in principle be avoided by performing measurements on neutrons stored in a magnetic trap. Neutral-particle and charged-particle traps are widely used for studying both composite and elementary particles, because they allow long interaction times and isolation of particles from perturbing environments. Here we report the magnetic trapping of neutrons. The trapping region is filled with superfluid 4He, which is used to load neutrons into the trap and as a scintillator to detect their decay. Neutrons in the trap have a lifetime of 750(+330)(-200) seconds, mainly limited by their beta decay rather than trap losses. Our experiment verifies theoretical predictions regarding the loading process and magnetic trapping of neutrons. Further refinement of this method should lead to improved precision in the neutron lifetime measurement.

The role of solitons in charge and energy transfer in 1D molecular chains

NASA Astrophysics Data System (ADS)

Ivić , Zoran

1998-03-01

The idea that polarons and solitons could play the crucial role in the transport processes in biological structures, has been critically reexamined on the basis of the general theory of self-trapping phenomena. The criteria which enable one to determine conditions for the existence and stability of polarons and solitons and to determine their character, in dependence of the values of the basic physical parameters of the system, were formulated. Validity of the so-called Davydov's soliton model was discussed on the basis of these criteria. It was found that the original Davydov's proposal, based upon the idea of the soliton creation due to the single excitation (particle, vibron, etc.) self-trapping, cannot explain the intramolecular energy transfer in α-helix and acetanilide. However, Davydov theory is flexible enough to describe the single electron transfer in some systems (α-helix and acetanilide for example). In the many-particle systems, dressing effect, due to the quantum nature of phonons, may cause the creation of the bound states of the several excitons in the molecular chain. The possibility of creation of the soliton states of this type is discussed for the simple Fröhlich's one-dimensional model. The regions of the system parameter space where different mechanisms dominate the behaviour of such entities are characterized.

Classification of three-particle states according to an orthonormal SU(3) ⊃ SO(3) basis

NASA Astrophysics Data System (ADS)

del Aguila, F.

1980-09-01

In this paper we generalize Dragt's approach to classifying three-particle states. Using his formalism of creation and annihilation operators, we obtain explicitly a complete set of orthonormal functions YλμRLM on S5. This set of functions carries all the irreducible representations of the group SU(3) reduced according to SO(3). The YλμRLM, which are eigenvectors of the togetherness and angular momentum operators, have very simple properties under three-particle permutations. We obtain also explicitly the coefficients ''3ν'' which reduce the products of these functions.

Vortex Particle-Mesh simulations of Vertical Axis Wind Turbine flows: from the blade aerodynamics to the very far wake

NASA Astrophysics Data System (ADS)

Chatelain, P.; Duponcheel, M.; Caprace, D.-G.; Marichal, Y.; Winckelmans, G.

2016-09-01

A Vortex Particle-Mesh (VPM) method with immersed lifting lines has been developed and validated. Based on the vorticity-velocity formulation of the Navier-Stokes equations, it combines the advantages of a particle method and of a mesh-based approach. The immersed lifting lines handle the creation of vorticity from the blade elements and its early development. LES of Vertical Axis Wind Turbine (VAWT) flows are performed. The complex wake development is captured in details and over very long distances: from the blades to the near wake coherent vortices, then through the transitional ones to the fully developed turbulent far wake (beyond 10 rotor diameters). The statistics and topology of the mean flow are studied. The computational sizes also allow insights into the detailed unsteady vortex dynamics, including some unexpected topological flow features.

Systems and methods for creation of conducting networks of magnetic particles through dynamic self-assembly process

DOEpatents

Snezhko, Oleksiy [Woodridge, IL; Aronson, Igor [Darien, IL; Kwok, Wai-Kwong [Downers Grove, IL

2011-01-25

Self-assembly of magnetic microparticles in AC magnetic fields. Excitation of the system by an AC magnetic field provides a variety of patterns that can be controlled by adjusting the frequency and the amplitude of the field. At low particle densities the low-frequency magnetic excitation favors cluster phase formation, while high frequency excitation favors chains and netlike structures. For denser configurations, an abrupt transition to the network phase was obtained.

Solar cells based on particulate structure of active layer: Investigation of light absorption by an ordered system of spherical submicron silicon particles

NASA Astrophysics Data System (ADS)

Miskevich, Alexander A.; Loiko, Valery A.

2015-12-01

Enhancement of the performance of photovoltaic cells through increasing light absorption due to optimization of an active layer is considered. The optimization consists in creation of particulate structure of active layer. The ordered monolayers and multilayers of submicron crystalline silicon (c-Si) spherical particles are examined. The quasicrystalline approximation (QCA) and the transfer matrix method (TMM) are used to calculate light absorption in the wavelength range from 0.28 μm to 1.12 μm. The integrated over the terrestial solar spectral irradiance "Global tilt" ASTM G173-03 absorption coefficient is calculated. In the wavelength range of small absorption index of c-Si (0.8-1.12 μm) the integral absorption coefficient of monolayer can be more than 20 times higher than the one of the plane-parallel plate of the equivalent volume of material. In the overall considered range (0.28-1.12 μm) the enhancement factor up to ~1.45 for individual monolayer is observed. Maximum value of the spectral absorption coefficient approaches unity for multilayers consisting of large amount of sparse monolayers of small particles. Multilayers with variable concentration and size of particles in the monolayer sequences are considered. Absorption increasing by such gradient multilayers as compared to the non-gradient ones is illustrated. The considered structures are promising for creation of high efficiency thin-film solar cells.

From Waves to Particle Tracks and Quantum Probabilities

NASA Astrophysics Data System (ADS)

Falkenburg, Brigitte

Here, the measurement methods for identifying massive charged particles are investigated. They have been used from early cosmic ray studies up to the present day. Laws such as the classical Lorentz force and Einstein's relativistic kinematics were established before the rise of quantum mechanics. Later, it became crucial to measure the energy loss of charged particles in matter. In 1930, Bethe developed a semi-classical model based on the quantum mechanics of scattering. In the early 1930s, he and others calculated the passage of charged particles through matter including pair creation and bremsstrahlung. Due to missing trust in quantum electrodynamics, however, only semi-empirical methods were employed in order to estimate the mass and charge from the features of particle tracks. In 1932, Anderson inserted a lead plate into the cloud chamber in order to determine the flight direction and charge of the `positive electron'. In the 1940s, nuclear emulsions helped to resolve puzzles about particle identification and quantum electrodynamics. Later, the measurement theory was extended in a cumulative process by adding conservation laws for dynamic properties, probabilistic quantum formulas for resonances, scattering cross sections, etc. The measurement method was taken over from cosmic ray studies to the era of particle accelerators, and finally taken back from there to astroparticle physics. The measurement methods remained the same, but in the transition from particle to astroparticle physics the focus of interest shifted. Indeed, the experimental methods of both fields explore the grounds of `new physics' in complementary ways.

The dynamic development of the muzzle imprint by contact gunshot: high-speed documentation utilizing the "skin-skull-brain model".

PubMed

Thali, M J; Kneubuehl, B P; Dirnhofer, R; Zollinger, U

2002-07-17

Many contact gunshots produce a muzzle imprint in the skin of the victim. Different mechanisms have been discussed in literature as being responsible for the creation of the muzzle imprint. Experimenting upon the synthetic non biological skin-skull-brain model, our goal was to document and study the creation of the muzzle imprint with the aid of high-speed photography. In our experiments, we could document with our high-speed photography (at exposure rates in the range of nanoseconds) the bulging, the pressing against the muzzle, and the splitting of the artificial skin. Furthermore, it was possible to photographically record the back pattern of synthetic tissue particles. And, the soot and gunpowder cavity could be reproduced experimentally. In conclusion the experiments completed with the skin-skull-brain model, using high-speed photography for documentation, show the promising possibilities of experimental ballistics with body models.

Operational features of decorative concrete

NASA Astrophysics Data System (ADS)

Bazhenova, Olga; Kotelnikov, Maxim

2018-03-01

This article deals with the questions of creation and use of decorative and finishing concrete and mortar. It has been revealed that the most effective artificial rock-imitating stone materials are those made of decorative concrete with the opened internal structure of material. At the same time it is important that the particles of decorative aggregate should be distributed evenly in the concrete volume. It can be reached only at a continuous grain-size analysis of the aggregate from the given rock. The article tackles the necessity of natural stone materials imitation for the cement stone color to correspond to the color of the rock. The possibility of creation of the decorative concrete imitating rocks in the high-speed turbulent mixer is considered. Dependences of durability and frost resistance of the studied concrete on the pore size and character and also parameters characterizing crack resistance of concrete are received.

How are soap bubbles blown? Fluid dynamics of soap bubble blowing

NASA Astrophysics Data System (ADS)

Davidson, John; Lambert, Lori; Sherman, Erica; Wei, Timothy; Ryu, Sangjin

2013-11-01

Soap bubbles are a common interfacial fluid dynamics phenomenon having a long history of delighting not only children and artists but also scientists. In contrast to the dynamics of liquid droplets in gas and gas bubbles in liquid, the dynamics of soap bubbles has not been well documented. This is possibly because studying soap bubbles is more challenging due to there existing two gas-liquid interfaces. Having the thin-film interface seems to alter the characteristics of the bubble/drop creation process since the interface has limiting factors such as thickness. Thus, the main objective of this study is to determine how the thin-film interface differentiates soap bubbles from gas bubbles and liquid drops. To investigate the creation process of soap bubbles, we constructed an experimental model consisting of air jet flow and a soap film, which consistently replicates the conditions that a human produces when blowing soap bubbles, and examined the interaction between the jet and the soap film using the high-speed videography and the particle image velocimetry.

Influence of e-e+ creation on the radiative trapping in ultraintense fields of colliding laser pulses

NASA Astrophysics Data System (ADS)

Baumann, C.; Pukhov, A.

2016-12-01

The behavior of a thin plasma target irradiated by two counterpropagating laser pulses of ultrahigh intensity is studied in the framework of one- and two-dimensional particle-in-cell simulations. It is found that above an intensity threshold, radiative trapping can focus electrons in the peaks of the electromagnetic field. At even higher intensities, the trapping effect cannot be maintained according to the increasing influence of electron-positron pair production on the laser-plasma dynamics.

Decay of the de Sitter vacuum

NASA Astrophysics Data System (ADS)

Anderson, Paul R.; Mottola, Emil; Sanders, Dillon H.

2018-03-01

The decay rate of the Bunch-Davies state of a massive scalar field in the expanding flat spatial sections of de Sitter space is determined by an analysis of the particle pair creation process in real time. The Feynman definition of particle and antiparticle Fourier mode solutions of the scalar wave equation and their adiabatic phase analytically continued to the complexified time domain show conclusively that the Bunch-Davies state is not the vacuum state at late times. The closely analogous creation of charged particle pairs in a uniform electric field is reviewed and Schwinger's result for the vacuum decay rate is recovered by this same real time analysis. The vacuum decay rate in each case is also calculated by switching the background field on adiabatically, allowing it to act for a very long time, and then adiabatically switching it off again. In both the uniform electric field and de Sitter cases, the particles created while the field is switched on are verified to be real, in the sense that they persist in the final asymptotic flat zero-field region. In the de Sitter case, there is an interesting residual dependence of the rate on how the de Sitter phase is ended, indicating a greater sensitivity to spatial boundary conditions. The electric current of the created particles in the E -field case and their energy density and pressure in the de Sitter case are also computed, and the magnitude of their backreaction effects on the background field estimated. Possible consequences of the Hubble scale instability of the de Sitter vacuum for cosmology, vacuum dark energy, and the cosmological "constant" problem are discussed.

Universality-class crossover by a nonorder field introduced to the pair contact process with diffusion

NASA Astrophysics Data System (ADS)

Park, Su-Chan

2017-09-01

The one-dimensional pair contact process with diffusion (PCPD), an interacting particle system with diffusion, pair annihilation, and creation by pairs, has defied consensus about the universality class to which it belongs. An argument by Hinrichsen [Physica A 361, 457 (2006), 10.1016/j.physa.2005.06.101] claims that freely diffusing particles in the PCPD should play the same role as frozen particles when it comes to the critical behavior. Therefore, the PCPD is claimed to have the same critical phenomena as a model with infinitely many absorbing states that belongs to the directed percolation (DP) universality class. To investigate if diffusing particles are really indistinguishable from frozen particles in the sense of the renormalization group, we study numerically a variation of the PCPD by introducing a nonorder field associated with infinitely many absorbing states. We find that a crossover from the PCPD to DP occurs due to the nonorder field. By studying a similar model, we exclude the possibility that the mere introduction of a nonorder field to one model can entail a nontrivial crossover to another model in the same universality class, thus we attribute the observed crossover to the difference of the universality class of the PCPD from the DP class.

Antimatter Production at a Potential Boundary

NASA Technical Reports Server (NTRS)

LaPointe, Michael R.; Reddy, Dhanireddy (Technical Monitor)

2001-01-01

Current antiproton production techniques rely on high-energy collisions between beam particles and target nuclei to produce particle and antiparticle pairs, but inherently low production and capture efficiencies render these techniques impractical for the cost-effective production of antimatter for space propulsion and other commercial applications. Based on Dirac's theory of the vacuum field, a new antimatter production concept is proposed in which particle-antiparticle pairs are created at the boundary of a steep potential step formed by the suppression of the local vacuum fields. Current antimatter production techniques are reviewed, followed by a description of Dirac's relativistic quantum theory of the vacuum state and corresponding solutions for particle tunneling and reflection from a potential barrier. The use of the Casimir effect to suppress local vacuum fields is presented as a possible technique for generating the sharp potential gradients required for particle-antiparticle pair creation.

Deposition of gold nano-particles and nano-layers on polyethylene modified by plasma discharge and chemical treatment

NASA Astrophysics Data System (ADS)

Švorčík, V.; Chaloupka, A.; Záruba, K.; Král, V.; Bláhová, O.; Macková, A.; Hnatowicz, V.

2009-08-01

Polyethylene (PE) was treated in Ar plasma discharge and then grafted from methanol solution of 1,2-ethanedithiol to enhance adhesion of gold nano-particles or sputtered gold layers. The modified PE samples were either immersed into freshly prepared colloid solution of Au nano-particles or covered by sputtered, 50 nm thick gold nano-layer. Properties of the plasma modified, dithiol grafted and gold coated PE were studied using XPS, UV-VIS, AFM, EPR, RBS methods and nanoindentation. It was shown that the plasma treatment results in degradation of polymer chain, creation of excessive free radicals and conjugated double bonds. After grafting with 1,2-ethanedithiol the concentration of free radicals declined but the concentration of double bonds remained unchanged. Plasma treatment changes PE surface morphology and increases surface roughness too. Another significant change in the surface morphology and roughness was observed after deposition of Au nano-particles. The presence of Au on the sample surface after the coating with Au nano-particles was proved by XPS and RBS methods. Nanoindentation measurements shown that the grafting of plasma activated PE surface with dithiol increases significantly adhesion of sputtered Au nano-layer.

The Cyber Domain: A Leviathan or Giant waiting to be Slain with the Stone of Doctrine

DTIC Science & Technology

2014-05-22

about operationalizing this domain. But the other domains are natural, created by God , and this one is the creation of man. Man can actually change...electromagnetic radiation, charged particles , and electric and magnetic fields are the dominant physical influences, and that encompasses the

News | News | Page 3

Science.gov Websites

. Scientist Bob Tschirhart appointed Fermilab chief project officer March 27, 2018 As CPO, Tschirhart will target is the site of particle creation. It's a straightforward role with complex considerations. ADMX renowned accelerator physicist with leadership experience at three science laboratories, took on the role

Fourth Generation Parity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Hye-Sung; Soni, Amarjit

2013-01-01

We present a very simple 4th-generation (4G) model with an Abelian gauge interaction under which only the 4G fermions have nonzero charge. The U(1) gauge symmetry can have a Z_2 residual discrete symmetry (4G-parity), which can stabilize the lightest 4G particle (L4P). When the 4G neutrino is the L4P, it would be a neutral and stable particle and the other 4G fermions would decay into the L4P leaving the trace of missing energy plus the standard model fermions. Because of the new symmetry, the 4G particle creation and decay modes are different from those of the sequential 4G model, andmore » the 4G particles can be appreciably lighter than typical experimental bounds.« less

Drainage and Stratification Kinetics of Foam Films

NASA Astrophysics Data System (ADS)

Zhang, Yiran; Sharma, Vivek

2014-03-01

Baking bread, brewing cappuccino, pouring beer, washing dishes, shaving, shampooing, whipping eggs and blowing bubbles all involve creation of aqueous foam films. Foam lifetime, drainage kinetics and stability are strongly influenced by surfactant type (ionic vs non-ionic), and added proteins, particles or polymers modify typical responses. The rate at which fluid drains out from a foam film, i.e. drainage kinetics, is determined in the last stages primarily by molecular interactions and capillarity. Interestingly, for certain low molecular weight surfactants, colloids and polyelectrolyte-surfactant mixtures, a layered ordering of molecules, micelles or particles inside the foam films leads to a stepwise thinning phenomena called stratification. Though stratification is observed in many confined systems including foam films containing particles or polyelectrolytes, films containing globular proteins seem not to show this behavior. Using a Scheludko-type cell, we experimentally study the drainage and stratification kinetics of horizontal foam films formed by protein-surfactant mixtures, and carefully determine how the presence of proteins influences the hydrodynamics and thermodynamics of foam films.

Multiplicity evolution of identified particle charge-dependent correlations in Pb-Pb, p-Pb and pp collisions at the LHC with ALICE

NASA Astrophysics Data System (ADS)

Pan, Jinjin; Alice Collaboration

2017-09-01

The charge pair creation and transport processes in heavy-ion collisions are investigated experimentally by measurements of charge-dependent correlations of identified particle pairs, related to the Balance Function. The produced pair separation in rapidity is expected to be larger for hadrons arising from quark-antiquark pair creation in the early stages of the collision than for hadrons emerging from the later hadronization stage. Correlations are reported for charged-pion pairs in Pb-Pb, p-Pb and pp collisions at √{sNN } = 2.76, 5.02 and 7 TeV, respectively; and for charged-kaon pairs in Pb-Pb collisions at √{sNN } = 2.76 TeV. The correlations are measured as a function of relative rapidity Δy and azimuthal angle Δϕ , and are dominated by a peak centered at Δy = Δϕ = 0. We observe that the peak widths in Δy and Δϕ are narrower in higher multiplicity events in Pb-Pb, p-Pb, and pp collisions, which is consistent with the effects of radial flow, as well as the two-wave quark production mechanism. We investigate the charge transport and system evolution further by studying the Δϕ width of the peak as a function of Δy. Funded by the US Department of Energy.

Creation of hydrophobic surfaces using a paint containing functionalized oxide particles

NASA Astrophysics Data System (ADS)

Sino, Paul Albert L.; Herrera, Marvin U.; Balela, Mary Donnabelle L.

2017-05-01

Hydrophobic surfaces were created by coating various substrates (aluminum sheet, soda-lime glass, silicon carbide polishing paper, glass with double-sided adhesive) with paint containing functionalized oxide particles. The paint was created by functionalizing oxide particles (ground ZnO, TiO2 nanoparticles, or TiO2 microparticles) with fluorosilane molecules in absolute ethanol. Water contact angle of samples shows that the coated substrate becomes hydrophobic (water contact angle ≥ 90°). Among the oxides that were used, ground ZnO yielded contact angle exemplifying superhydrophobicity (water contact angle ≥ 150°). Scanning electron micrograph of paint-containing TiO2 nanoparticles shows rough functionalized oxides structures which probably increase the hydrophobicity of the surface.

On the possibility of collective attraction in complex plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chaudhuri, M.; Morfill, G. E.; Kompaneets, R.

2010-06-15

An investigation on the possible collective electric attraction between like-charged dust particles has been performed in an isotropic homogeneous complex (dusty) plasma in which a balance between plasma creation due to ionization and plasma loss due to the absorption on dust particles has been reached. The analysis is made on the basis of a self-consistent fluid model, which includes plasma ionization, plasma loss on dust particles, dust charge variations, and ion-neutral friction. It is shown that the interaction potential can have an attractive part in the stability regime of the ionization-absorption balance with respect to ion perturbations only under verymore » limited circumstances.« less

Worldsheet instantons and the amplitude for string pair production in an external field as a WKB exact functional integral

NASA Astrophysics Data System (ADS)

Gordon, James; Semenoff, Gordon W.

2018-05-01

We revisit the problem of charged string pair creation in a constant external electric field. The string states are massive and creation of pairs from the vacuum is a tunnelling process, analogous to the Schwinger process where charged particle-anti-particle pairs are created by an electric field. We find the instantons in the worldsheet sigma model which are responsible for the tunnelling events. We evaluate the sigma model partition function in the multi-instanton sector in the WKB approximation which keeps the classical action and integrates the quadratic fluctuations about the solution. We find that the summation of the result over all multi-instanton sectors reproduces the known amplitude. This suggests that corrections to the WKB limit must cancel. To show that they indeed cancel, we identify a fermionic symmetry of the sigma model which occurs in the instanton sectors and which is associated with collective coordinates. We demonstrate that the action is symmetric and that the interaction action is an exact form. These conditions are sufficient for localization of the worldsheet functional integral onto its WKB limit.

The cosmological dark sector as a scalar σ -meson field

NASA Astrophysics Data System (ADS)

Carneiro, Saulo

2018-03-01

Previous quantum field estimations of the QCD vacuum in the expanding space-time lead to a dark energy component scaling linearly with the Hubble parameter, which gives the correct figure for the observed cosmological term. Here we show that this behaviour also appears at the classical level, as a result of the chiral symmetry breaking in a low energy, effective σ -model. The dark sector is described in a unified way by the σ condensate and its fluctuations, giving rise to a decaying dark energy and a homogeneous creation of non-relativistic dark particles. The creation rate and the future asymptotic de Sitter horizon are both determined by the σ mass scale.

Wave-Particle Interactions in the Radiation Belts, Aurora,and Solar Wind: Opportunities for Lab Experiments

NASA Astrophysics Data System (ADS)

Kletzing, C.

2017-12-01

The physics of the creation, loss, and transport of radiation belt particles is intimately connected to the electric and magnetic fields which mediate these processes. A large range of field and particle interactions are involved in this physics from large-scale ring current ion and magnetic field dynamics to microscopic kinetic interactions of whistler-mode chorus waves with energetic electrons. To measure these kinds of radiation belt interactions, NASA implemented the two-satellite Van Allen Probes mission. As part of the mission, the Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) investigation is an integrated set of instruments consisting of a triaxial fluxgate magnetometer (MAG) and a Waves instrument which includes a triaxial search coil magnetometer (MSC). We show a variety of waves thought to be important for wave particle interactionsin the radiation belts: low frequency ULF pulsations, EMIC waves, and whistler mode waves including upper and lower band chorus. Outside ofthe radiation belts, Alfven waves play a key role in both solar wind turbulenceand auroral particle acceleration. Several of these wave modes could benefit (or have benefitted) from laboratory studies to further refineour understanding of the detailed physics of the wave-particle interactionswhich lead to energization, pitch angle scattering, and cross-field transportWe illustrate some of the processes and compare the wave data with particle measurements to show relationships between wave activity and particle processobserved in the inner magnetosphere and heliosphere.

Integrable dissipative exclusion process: Correlation functions and physical properties

NASA Astrophysics Data System (ADS)

Crampe, N.; Ragoucy, E.; Rittenberg, V.; Vanicat, M.

2016-09-01

We study a one-parameter generalization of the symmetric simple exclusion process on a one-dimensional lattice. In addition to the usual dynamics (where particles can hop with equal rates to the left or to the right with an exclusion constraint), annihilation and creation of pairs can occur. The system is driven out of equilibrium by two reservoirs at the boundaries. In this setting the model is still integrable: it is related to the open XXZ spin chain through a gauge transformation. This allows us to compute the full spectrum of the Markov matrix using Bethe equations. We also show that the stationary state can be expressed in a matrix product form permitting to compute the multipoints correlation functions as well as the mean value of the lattice and the creation-annihilation currents. Finally, the variance of the lattice current is computed for a finite-size system. In the thermodynamic limit, it matches the value obtained from the associated macroscopic fluctuation theory.

A Comprehensive Comparison of Relativistic Particle Integrators

NASA Astrophysics Data System (ADS)

Ripperda, B.; Bacchini, F.; Teunissen, J.; Xia, C.; Porth, O.; Sironi, L.; Lapenta, G.; Keppens, R.

2018-03-01

We compare relativistic particle integrators commonly used in plasma physics, showing several test cases relevant for astrophysics. Three explicit particle pushers are considered, namely, the Boris, Vay, and Higuera–Cary schemes. We also present a new relativistic fully implicit particle integrator that is energy conserving. Furthermore, a method based on the relativistic guiding center approximation is included. The algorithms are described such that they can be readily implemented in magnetohydrodynamics codes or Particle-in-Cell codes. Our comparison focuses on the strengths and key features of the particle integrators. We test the conservation of invariants of motion and the accuracy of particle drift dynamics in highly relativistic, mildly relativistic, and non-relativistic settings. The methods are compared in idealized test cases, i.e., without considering feedback onto the electrodynamic fields, collisions, pair creation, or radiation. The test cases include uniform electric and magnetic fields, {\\boldsymbol{E}}× {\\boldsymbol{B}} fields, force-free fields, and setups relevant for high-energy astrophysics, e.g., a magnetic mirror, a magnetic dipole, and a magnetic null. These tests have direct relevance for particle acceleration in shocks and in magnetic reconnection.

Numerical investigation of the effect of number and shape of inlet of cyclone and particle size on particle separation

NASA Astrophysics Data System (ADS)

Khazaee, Iman

2017-06-01

Cyclones are one of the most common devices for removing particles from the gas stream and act as a filter. The mode of action of separating these particles, from mass gas flow, in this case, is that the inertia force exerted on the solid particles in the cyclone, several times greater than the force of inertia into the gas phase and so the particles are guided from the sides of the cyclone body to the bottom body but less power will be affected by the gas phase and from upper parts, solid particles, goes to the bottom chamber. Most of the attention has been focused on finding new methods to improve performance parameters. Recently, some studies were conducted to improve equipment performance by evaluating geometric effects on projects. In this work, the effect of cyclone geometry was studied through the creation of a symmetrical double and quad inlet and also studied cutting inlet geometry and their influence on separation efficiency. To assess the accuracy of modeling, selected model compared with the model Kim and Lee and the results were close to acceptable. The collection efficiency of the double inlet cyclone was found to be 20-25% greater than that of the single inlet cyclone and the collection efficiency of the quad inlet cyclone was found to be 40-45% greater than with the same inlet size. Also the collection efficiency of the rectangle inlet was found to be 4-6% greater than ellipse inlet and the collection efficiency of the ellipse inlet was found to be 30-35% greater than circle inlet.

Anisotropic Weyl fermions from the quasiparticle excitation spectrum of a 3D Fulde-Ferrell superfluid.

PubMed

Xu, Yong; Chu, Rui-Lin; Zhang, Chuanwei

2014-04-04

Weyl fermions, first proposed for describing massless chiral Dirac fermions in particle physics, have not been observed yet in experiments. Recently, much effort has been devoted to explore Weyl fermions around band touching points of single-particle energy dispersions in certain solid state materials (named Weyl semimetals), similar as graphene for Dirac fermions. Here we show that such Weyl semimetals also exist in the quasiparticle excitation spectrum of a three-dimensional spin-orbit-coupled Fulde-Ferrell superfluid. By varying Zeeman fields, the properties of Weyl fermions, such as their creation and annihilation, number and position, as well as anisotropic linear dispersions around band touching points, can be tuned. We study the manifestation of anisotropic Weyl fermions in sound speeds of Fulde-Ferrell fermionic superfluids, which are detectable in experiments.

A novel method for tracing the movement of multiple individual soil particles under rainfall conditions using florescent videography.

NASA Astrophysics Data System (ADS)

Hardy, Robert; Pates, Jackie; Quinton, John

2016-04-01

The importance of developing new techniques to study soil movement cannot be underestimated especially those that integrate new technology. Currently there are limited empirical data available about the movement of individual soil particles, particularly high quality time-resolved data. Here we present a new technique which allows multiple individual soil particles to be traced in real time under simulated rainfall conditions. The technique utilises fluorescent videography in combination with a fluorescent soil tracer, which is based on natural particles. The system has been successfully used on particles greater than ~130 micrometres diameter. The technique uses HD video shot at 50 frames per second, providing extremely high temporal (0.02 s) and spatial resolution (sub-millimetre) of a particle's location without the need to perturb the system. Once the tracer has been filmed then the images are processed and analysed using a particle analysis and visualisation toolkit written in python. The toolkit enables the creation of 2 and 3-D time-resolved graphs showing the location of 1 or more particles. Quantitative numerical analysis of a pathway (or collection of pathways) is also possible, allowing parameters such as particle speed and displacement to be assessed. Filming the particles removes the need to destructively sample material and has many side-benefits, reducing the time, money and effort expended in the collection, transport and laboratory analysis of soils, while delivering data in a digital form which is perfect for modern computer-driven analysis techniques. There are many potential applications for the technique. High resolution empirical data on how soil particles move could be used to create, parameterise and evaluate soil movement models, particularly those that use the movement of individual particles. As data can be collected while rainfall is occurring it may offer the ability to study systems under dynamic conditions(rather than rainfall of a constant intensity), which are more realistic and this was one motivations behind the development of this technique.

3-dimensional free standing micro-structures by proton beam writing of Su 8-silver nanoParticle polymeric composite

NASA Astrophysics Data System (ADS)

Igbenehi, H.; Jiguet, S.

2012-09-01

Proton beam lithography a maskless direct-write lithographic technique (well suited for producing 3-Dimensional microstructures in a range of resist and semiconductor materials) is demonstrated as an effective tool in the creation of electrically conductive freestanding micro-structures in an Su 8 + Nano Silver polymer composite. The structures produced show non-ohmic conductivity and fit the percolation theory conduction model of tunneling of separated nanoparticles. Measurements show threshold switching and a change in conductivity of at least 4 orders of magnitude. The predictable range of protons in materials at a given energy is exploited in the creation of high aspect ratio, free standing micro-structures, made from a commercially available SU8 Silver nano-composite (GMC3060 form Gersteltec Inc. a negative tone photo-epoxy with added metallic nano-particles(Silver)) to create films with enhanced electrical properties when exposed and cured. Nano-composite films are directly written on with a finely focused MeV accelerated Proton particle beam. The energy loss of the incident proton beams in the target polymer nano- composite film is concentrated at the end of its range, where damage occurs; changing the chemistry of the nano-composite film via an acid initiated polymerization - creating conduction paths. Changing the energy of the incident beams provide exposed regions with different penetration and damage depth - exploited in the demonstrated cantilever microstructure.

Transition from the mechanics of material points to the mechanics of structured particles

NASA Astrophysics Data System (ADS)

Somsikov, V. M.

2016-01-01

In this paper, necessity of creation of mechanics of structured particles is discussed. The way to create this mechanics within the laws of classical mechanics with the use of energy equation is shown. The occurrence of breaking of time symmetry within the mechanics of structured particles is shown, as well as the introduction of concept of entropy in the framework of classical mechanics. The way to create the mechanics of non-equilibrium systems in the thermodynamic approach is shown. It is also shown that the use of hypothesis of holonomic constraints while deriving the canonical Lagrange equation made it impossible to describe irreversible dynamics. The difference between the mechanics of structured particles and the mechanics of material points is discussed. It is also shown that the matter is infinitely divisible according to the laws of classical mechanics.

Quantum anomalous Hall Majorana platform

NASA Astrophysics Data System (ADS)

Zeng, Yongxin; Lei, Chao; Chaudhary, Gaurav; MacDonald, Allan H.

2018-02-01

We show that quasi-one-dimensional quantum wires can be written onto the surface of magnetic topological insulator (MTI) thin films by gate arrays. When the MTI is in a quantum anomalous Hall state, MTI/superconductor quantum wires have especially broad stability regions for both topological and nontopological states, facilitating creation and manipulation of Majorana particles on the MTI surface.

Neutron yield when fast deuterium ions collide with strongly charged tritium-saturated dust particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akishev, Yu. S., E-mail: akishev@triniti.ru; Karal’nik, V. B.; Petryakov, A. V.

2017-02-15

The ultrahigh charging of dust particles in a plasma under exposure to an electron beam with an energy up to 25 keV and the formation of a flux of fast ions coming from the plasma and accelerating in the strong field of negatively charged particles are considered. Particles containing tritium or deuterium atoms are considered as targets. The calculated rates of thermonuclear fusion reactions in strongly charged particles under exposure to accelerated plasma ions are presented. The neutron generation rate in reactions with accelerated deuterium and tritium ions has been calculated for these targets. The neutron yield has been calculatedmore » when varying the plasma-forming gas pressure, the plasma density, the target diameter, and the beam electron current density. Deuterium and tritium-containing particles are shown to be the most promising plasmaforming gas–target material pair for the creation of a compact gas-discharge neutron source based on the ultrahigh charging of dust particles by beam electrons with an energy up to 25 keV.« less

Electrostatic plasma lens for focusing negatively charged particle beams.

PubMed

Goncharov, A A; Dobrovolskiy, A M; Dunets, S M; Litovko, I V; Gushenets, V I; Oks, E M

2012-02-01

We describe the current status of ongoing research and development of the electrostatic plasma lens for focusing and manipulating intense negatively charged particle beams, electrons, and negative ions. The physical principle of this kind of plasma lens is based on magnetic isolation electrons providing creation of a dynamical positive space charge cloud in shortly restricted volume propagating beam. Here, the new results of experimental investigations and computer simulations of wide-aperture, intense electron beam focusing by plasma lens with positive space charge cloud produced due to the cylindrical anode layer accelerator creating a positive ion stream towards an axis system is presented.

Internal and surface waves in vibrofluidized granular materials: Role of cohesion

NASA Astrophysics Data System (ADS)

Huang, Kai

2018-05-01

Wave phenomena in vibrofluidized dry and partially wet granular materials confined in a quasi-two-dimensional geometry are investigated with numerical simulations considering individual particles as hard spheres. Short-ranged cohesive interactions arising from the formation of liquid bridges between adjacent particles are modeled by changing the velocity-dependent coefficient of restitution. Such a change effectively suppresses the formation of surface waves, in agreement with previous experimental observations. The difference in pattern creation arises from the suppressed momentum transfer due to wetting and it can be quantitatively understood from an analysis of binary impacts.

Antimatter as an Energy Source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, Gerald P.

2009-03-16

Antiprotons and positrons are constantly generated in space, and periodically manufactured by humans here on Earth. Harvesting of these particles in space and forming stable antimatter atoms and molecules would create a significant energy source for power and propulsion. Though dedicated fabrication of these particles on Earth consumes much more energy than could be liberated upon annihilation, manufactured antimatter represents a high-density energy storage mechanism well suited for spacecraft power and propulsion. In this paper the creation, storage, and utilization of antimatter is introduced. Specific examples of electrical energy generation and deep-space propulsion based on antimatter are also reviewed.

Reproduction of exact solutions of Lipkin model by nonlinear higher random-phase approximation

NASA Astrophysics Data System (ADS)

Terasaki, J.; Smetana, A.; Šimkovic, F.; Krivoruchenko, M. I.

2017-10-01

It is shown that the random-phase approximation (RPA) method with its nonlinear higher generalization, which was previously considered as approximation except for a very limited case, reproduces the exact solutions of the Lipkin model. The nonlinear higher RPA is based on an equation nonlinear on eigenvectors and includes many-particle-many-hole components in the creation operator of the excited states. We demonstrate the exact character of solutions analytically for the particle number N = 2 and numerically for N = 8. This finding indicates that the nonlinear higher RPA is equivalent to the exact Schrödinger equation.

Protein-Mediated Precipitation of Calcium Carbonate

PubMed Central

Polowczyk, Izabela; Bastrzyk, Anna; Fiedot, Marta

2016-01-01

Calcium carbonate is an important component in exoskeletons of many organisms. The synthesis of calcium carbonate was performed by mixing dimethyl carbonate and an aqueous solution of calcium chloride dihydrate. The precipitation product was characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) measurements. In addition, the turbidity of the reaction solution was acquired to monitor the kinetics of the calcium carbonate structure’s growth in the investigated system. In this study, samples of CaCO3 particles obtained with individual proteins, such as ovalbumin, lysozyme, and a mixture of the proteins, were characterized and compared with a control sample, i.e., synthesized without proteins. The obtained data indicated that the addition of ovalbumin to the reaction changed the morphology of crystals from rhombohedral to ‘stack-like’ structures. Lysozyme, however, did not affect the morphology of calcium carbonate, yet the presence of the protein mixture led to the creation of more complex composites in which the calcium carbonate crystals were constructed in protein matrices formed by the ovalbumin-lysozyme interaction. It was also observed that in the protein mixture, ovalbumin has a major influence on the CaCO3 formation through a strong interaction with calcium ions, which leads to the coalescence and creation of a steric barrier reducing particle growth. The authors proposed a mechanism of calcium carbonate grain growth in the presence of both proteins, taking into account the interaction of calcium ions with the protein. PMID:28774065

An Integrated Higgs Force Theory

NASA Astrophysics Data System (ADS)

Colella, Antonio

2016-03-01

An Integrated Higgs force theory (IHFT) was based on 2 key requirement amplifications: a matter particle/Higgs force was one and inseparable; a matter particle/Higgs force bidirectionally condensed/evaporated from/to super force. These were basis of 5 theories: particle creation, baryogenesis, superpartner/quark decays, spontaneous symmetry breaking, and stellar black holes. Our universe's 129 matter/force particles contained 64 supersymmetric Higgs particles; 9 transient matter particles/Higgs forces decayed to 8 permanent matter particles/Higgs forces; mass was given to a matter particle by its Higgs force and gravitons; and sum of 8 Higgs force energies of 8 permanent matter particles was dark energy. An IHFT's essence is the intimate physical relationships between 8 theories. These theories are independent because physicists in one theory worked independently of physicists in the other seven. An IHFT's premise is without sacrificing their integrities, 8 independent existing theories are replaced by 8 interrelated amplified theories. Requirement amplifications provide interfaces between the 8 theories. Intimate relationships between 8 theories including the above 5 and string, Higgs forces, and Super Universe are described. The sorting category selected was F. PARTICLES AND FIELDS (e.g., F1 Higgs Physics, F10 Alternative Beyond the Standard Model Physics, F11 Dark Sector Theories and Searches, and F12 Particle Cosmology).

(U) An Analytic Examination of Piezoelectric Ejecta Mass Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tregillis, Ian Lee

2017-02-02

Ongoing efforts to validate a Richtmyer-Meshkov instability (RMI) based ejecta source model [1, 2, 3] in LANL ASC codes use ejecta areal masses derived from piezoelectric sensor data [4, 5, 6]. However, the standard technique for inferring masses from sensor voltages implicitly assumes instantaneous ejecta creation [7], which is not a feature of the RMI source model. To investigate the impact of this discrepancy, we define separate “areal mass functions” (AMFs) at the source and sensor in terms of typically unknown distribution functions for the ejecta particles, and derive an analytic relationship between them. Then, for the case of single-shockmore » ejection into vacuum, we use the AMFs to compare the analytic (or “true”) accumulated mass at the sensor with the value that would be inferred from piezoelectric voltage measurements. We confirm the inferred mass is correct when creation is instantaneous, and furthermore prove that when creation is not instantaneous, the inferred values will always overestimate the true mass. Finally, we derive an upper bound for the error imposed on a perfect system by the assumption of instantaneous ejecta creation. When applied to shots in the published literature, this bound is frequently less than several percent. Errors exceeding 15% may require velocities or timescales at odds with experimental observations.« less

Liquid Argon TPC Signal Formation, Signal Processing and Hit Reconstruction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baller, Bruce

2017-03-11

This document describes the early stage of the reconstruction chain that was developed for the ArgoNeuT and MicroBooNE experiments at Fermilab. These experiments study accelerator neutrino interactions that occur in a Liquid Argon Time Projection Chamber. Reconstructing the properties of particles produced in these interactions requires knowledge of the micro-physics processes that affect the creation and transport of ionization electrons to the readout system. A wire signal deconvolution technique was developed to convert wire signals to a standard form for hit reconstruction, to remove artifacts in the electronics chain and to remove coherent noise.

Almost Classical Creation of a Universe

NASA Astrophysics Data System (ADS)

Guendelman, E. I.; Portnoy, J.

We study the problem of a 1+1 cord with a dynamical massless scalar field living in it, which separates a false vacuum and a conical region in a 2+1 space. A stable ``particle-like'' configuration can be found. Also, oscillating solutions exist which can tunnel to an expanding type solution. The most outstanding feature for these oscillating solution is that we do not need a singularity to create an infinite universe from them, and that an arbitrarily small tunneling is needed to achieve this. Possible consequences for similar processes, involving cosmic strings in 3+1 dimensions are discussed.

On the accuracy of the rate coefficients used in plasma fluid models for breakdown in air

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kourtzanidis, Konstantinos, E-mail: kkourt@utexas.edu; Raja, Laxminarayan L., E-mail: lraja@mail.utexas.edu

2016-07-15

The electrical breakdown of air depends on the balance between creation and loss of charged particles. In fluid models, datasets of the rate coefficients used are obtained either from fits to experimental data or by solutions of the Boltzmann equation. Here, we study the accuracy of the commonly used models for ionization and attachment frequencies and their impact on the prediction of the breakdown threshold for air. We show that large errors can occur depending on the model and propose the most accurate dataset available for modeling of air breakdown phenomena.

State-of-the-art Nanofabrication in Catalysis.

PubMed

Karim, Waiz; Tschupp, Simon A; Herranz, Juan; Schmidt, Thomas J; Ekinci, Yasin; van Bokhovenac, Jeroen A

2017-04-26

We present recent developments in top-down nanofabrication that have found application in catalysis research. To unravel the complexity of catalytic systems, the design and use of models with control of size, morphology, shape and inter-particle distances is a necessity. The study of well-defined and ordered nanoparticles on a support contributes to the understanding of complex phenomena that govern reactions in heterogeneous and electro-catalysis. We review the strengths and limitations of different nanolithography methods such as electron beam lithography (EBL), photolithography, extreme ultraviolet (EUV) lithography and colloidal lithography for the creation of such highly tunable catalytic model systems and their applications in catalysis. Innovative strategies have enabled particle sizes reaching dimensions below 10 nm. It is now possible to create pairs of particles with distance controlled with an extremely high precision in the order of one nanometer. We discuss our approach to study these model systems at the single-particle level using X-ray absorption spectroscopy and show new ways to fabricate arrays of single nanoparticles or nanoparticles in pairs over a large area using EBL and EUV-achromatic Talbot lithography. These advancements have provided new insights into the active sites in metal catalysts and enhanced the understanding of the role of inter-particle interactions and catalyst supports, such as in the phenomenon of hydrogen spillover. We present a perspective on future directions for employing top-down nanofabrication in heterogeneous and electrocatalysis. The rapid development in nanofabrication and characterization methods will continue to have an impact on understanding of complex catalytic processes.

Approach to magnetic neutron capture therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuznetsov, Anatoly A.; Podoynitsyn, Sergey N.; Filippov, Victor I.

2005-11-01

Purpose: The method of magnetic neutron capture therapy can be described as a combination of two methods: magnetic localization of drugs using magnetically targeted carriers and neutron capture therapy itself. Methods and Materials: In this work, we produced and tested two types of particles for such therapy. Composite ultradispersed ferro-carbon (Fe-C) and iron-boron (Fe-B) particles were formed from vapors of respective materials. Results: Two-component ultradispersed particles, containing Fe and C, were tested as magnetic adsorbent of L-boronophenylalanine and borax and were shown that borax sorption could be effective for creation of high concentration of boron atoms in the area ofmore » tumor. Kinetics of boron release into the physiologic solution demonstrate that ultradispersed Fe-B (10%) could be applied for an effective magnetic neutron capture therapy. Conclusion: Both types of the particles have high magnetization and magnetic homogeneity, allow to form stable magnetic suspensions, and have low toxicity.« less

Spontaneous decays of magneto-elastic excitations in non-collinear antiferromagnet (Y,Lu)MnO3

PubMed Central

Oh, Joosung; Le, Manh Duc; Nahm, Ho-Hyun; Sim, Hasung; Jeong, Jaehong; Perring, T. G.; Woo, Hyungje; Nakajima, Kenji; Ohira-Kawamura, Seiko; Yamani, Zahra; Yoshida, Y.; Eisaki, H.; Cheong, S. -W.; Chernyshev, A. L.; Park, Je-Geun

2016-01-01

Magnons and phonons are fundamental quasiparticles in a solid and can be coupled together to form a hybrid quasi-particle. However, detailed experimental studies on the underlying Hamiltonian of this particle are rare for actual materials. Moreover, the anharmonicity of such magnetoelastic excitations remains largely unexplored, although it is essential for a proper understanding of their diverse thermodynamic behaviour and intrinsic zero-temperature decay. Here we show that in non-collinear antiferromagnets, a strong magnon–phonon coupling can significantly enhance the anharmonicity, resulting in the creation of magnetoelastic excitations and their spontaneous decay. By measuring the spin waves over the full Brillouin zone and carrying out anharmonic spin wave calculations using a Hamiltonian with an explicit magnon–phonon coupling, we have identified a hybrid magnetoelastic mode in (Y,Lu)MnO3 and quantified its decay rate and the exchange-striction coupling term required to produce it. PMID:27759004

Time-varying q-deformed dark energy interacts with dark matter

NASA Astrophysics Data System (ADS)

Dil, Emre; Kolay, Erdinç

We propose a new model for studying the dark constituents of the universe by regarding the dark energy as a q-deformed scalar field interacting with the dark matter, in the framework of standard general relativity. Here we assume that the number of particles in each mode of the q-deformed scalar field varies in time by the particle creation and annihilation. We first describe the q-deformed scalar field dark energy quantum-field theoretically, then construct the action and the dynamical structure of these interacting dark sectors, in order to study the dynamics of the model. We perform the phase space analysis of the model to confirm and interpret our proposal by searching the stable attractor solutions implying the late-time accelerating phase of the universe. We then obtain the result that when interaction and equation-of-state parameter of the dark matter evolve from the present day values into a particular value, the dark energy turns out to be a q-deformed scalar field.

Grain size tuning of nanostructured Cu{sub 2}O films through vapour phase supersaturation control and their characterization for practical applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anu, A.; Abdul Khadar, M., E-mail: mabdulkhadar@rediffmail.com

2015-09-15

A strategy for creating nanostructured films is the alignment of nanoparticles into ordered superstructures as living organisms synthesize biomaterials with superior physical properties using nanoparticle building blocks. We synthesized nanostructured films of Cu{sub 2}O of variable grain size by establishing the condition of supersaturation for creation of nanoparticles of copper which deposited as nanograined films and which was then oxidized. This technique has the advantage of being compatible with conventional vacuum processes for electronic device fabrication. The Cu{sub 2}O film samples consisted of a secondary structure of spherical particles of almost uniform size, each particle being an agglomerate of primarymore » nanocrystals. Fractal analysis of the AFM images of the samples is carried out for studying the aggregation mechanism. Grain size tuning of the nanostructured Cu{sub 2}O films has been studied using XRD, and micro-Raman and photoluminescence spectroscopy.« less

Spectroscopic studies of non-thermal plasma jet at atmospheric pressure formed in low-current nonsteady-state plasmatron for biomedical applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Demkin, V. P.; Melnichuk, S. V.; Demkin, O. V.

The optical and electrophysical characteristics of the nonequilibrium low-temperature plasma formed by a low-current nonsteady-state plasmatron are experimentally investigated in the present work. It is demonstrated that experimental data on the optical diagnostics of the plasma jet can provide a basis for the construction of a self-consistent physical and mathematical plasma model and for the creation of plasma sources with controllable electrophysical parameters intended for the generation of the required concentration of active particles. Results of spectroscopic diagnostics of plasma of the low-current nonsteady-state plasmatron confirm that the given source is efficient for the generation of charged particles and short-wavelengthmore » radiation—important plasma components for biomedical problems of an increase in the efficiency of treatment of biological tissues by charged particles. Measurement of the spatial distribution of the plasma jet potential by the probe method has demonstrated that a negative space charge is formed in the plasma jet possibly due to the formation of electronegative oxygen ions.« less

Creation of electron-positron plasma with superstrong laser field

NASA Astrophysics Data System (ADS)

Narozhny, N. B.; Fedotov, A. M.

2014-05-01

We present a short review of recent progress in studying QED effects within the interaction of ultra-relativistic laser pulses with vacuum and e - e + plasma. Current development in laser technologies promises very rapid growth of laser intensities in the near future. Two exawatt class facilities (ELI and XCELS, Russia) in Europe are already in the planning stage. Realization of these projects will make available a laser intensity of ˜ 1026 W/cm2 or even higher. Therefore, discussion of nonlinear optical effects in vacuum are becoming compelling for experimentalists and are currently gaining much attention. We show that, in spite of the fact that the expected field strength is still essentially less than E S = m 2 c 3/ eℏ = 1.32 · 1016 V/cm, the nonlinear vacuum effects will be accessible for observation at the ELI and XCELS facilities. The most promissory effect for observation is pair creation by a laser pulse in vacuum. It is shown, that at intensities ˜ 5 · 1025 W/cm2, creation even of a single pair is accompanied by the development of an avalanche QED cascade. There exists a distinctive feature of the laser-induced cascades, as compared with the air showers arising due primarily to cosmic rays entering the atmosphere. In our case the laser field plays not only the role of a target (similar to a nucleus in the case of air showers) but is also responsible for the acceleration of slow particles. It is shown that the effect of pair creation imposes a natural limit for the attainable laser intensity and, apparently, the field strength E ˜ E S is not accessible for a pair-creating electromagnetic field at all.

Microprobes aluminosilicate ceramic membranes

DOEpatents

Anderson, Marc A.; Sheng, Guangyao

1993-01-01

Methods have been developed to make mixed alumina-silicate and aluminosilicate particulate microporous ceramic membranes. One method involves the making of separate alumina and silica sols which are then mixed. Another method involves the creation of a combined sol with aluminosilicate particles. The resulting combined alumina and silica membranes have high surface area, a very small pore size, and a very good temperature stability.

Creation of Y2Ti2O7 nanoprecipitates to strengthen the Fe-14Cr-3Al-2W steels by adding Ti hydride and Y2O3 nanoparticles

NASA Astrophysics Data System (ADS)

Wang, Linbo; Bai, Zhonglian; Shen, Hailong; Wang, Chenxi; Liu, Tong

2017-05-01

In order to prohibit the formation of large Y-Al-O precipitates, Ti hydride nanoparticles (NPs) were prepared and used to replace Ti as raw particles to fabricate the oxide dispersion strengthened (ODS) Fe-14Cr-3Al-2W-0.35Y2O3 steels by mechanical alloying (MA) and hot isostatic pressing (HIP). As the content of Ti hydride increases from 0.1 to 0.5 and 1.0 wt%, the oxide nanoprecipitates in the ODS steels changes from Y3Al5O12 phase to Y2Ti2O7 phase (semicoherent with the matrix), and the particle size is successfully reduced. The tensile strength of the ODS steel increases remarkably with increasing Ti hydride content. The sample with 1.0 wt% Ti hydride exhibits a high strength of 1049 MPa at 25 °C and 278 MPa at 700 °C. The creation of Y2Ti2O7 nanoprecipitates by adding Ti hydride NPs opens a new way to control the structure and size of the oxide precipitates in the ODS steels.

Experimental and Numerical Study of the Influence of Substrate Surface Preparation on Adhesion Mechanisms of Aluminum Cold Spray Coatings on 300M Steel Substrates

NASA Astrophysics Data System (ADS)

Nastic, A.; Vijay, M.; Tieu, A.; Rahmati, S.; Jodoin, B.

2017-10-01

The effect of substrate surface topography on the creation of metallurgical bonds and mechanical anchoring points has been studied for the cold spray deposition of pure aluminum on 300M steel substrate material. The coatings adhesion strength showed a significant decrease from 31.0 ± 5.7 MPa on polished substrates to 6.9 ± 2.0 MPa for substrates with roughness of 2.2 ± 0.5 μm. Strengths in the vicinity of 45 MPa were reached for coatings deposited onto forced pulsed waterjet treated surfaces with roughnesses larger than 33.8 μm. Finite element analysis has confirmed the sole presence of mechanical anchoring in coating adhesion strength for all surface treatment except polished surfaces. Grit embedment has been shown to be non-detrimental to coating adhesion for the current deposited material combination. The particle deformation process during impacts has been studied through finite element analysis using the Preston-Tonks-Wallace (PTW) constitutive model. The obtained equivalent plastic strain (PEEQ), temperature, contact pressure and velocity vector were correlated to the particle ability to form metallurgical bonds. Favorable conditions for metallurgical bonding were found to be highest for particles deposited on polished substrates, as confirmed by fracture surface analysis.

Born-Oppenheimer approximation for a singular system

NASA Astrophysics Data System (ADS)

Akbas, Haci; Turgut, O. Teoman

2018-01-01

We discuss a simple singular system in one dimension, two heavy particles interacting with a light particle via an attractive contact interaction and not interacting among themselves. It is natural to apply the Born-Oppenheimer approximation to this problem. We present a detailed discussion of this approach; the advantage of this simple model is that one can estimate the error terms self-consistently. Moreover, a Fock space approach to this problem is presented where an expansion can be proposed to get higher order corrections. A slight modification of the same problem in which the light particle is relativistic is discussed in a later section by neglecting pair creation processes. Here, the second quantized description is more challenging, but with some care, one can recover the first order expression exactly.

Impact of single particle oscillations on screening of a test charge

NASA Astrophysics Data System (ADS)

Ramazanov, Tlekkabul S.; Moldabekov, Zhandos A.; Gabdullin, Maratbek T.

2018-06-01

Screening of a test charge by electrons oscillating in an external alternating electrical (laser) field is analyzed. It is shown that single particle oscillations lead to the creation of an oscillatory pattern of the test charge's potential at large distances. Analysis has been done by considering and neglecting the contribution of ions on the screening. Impact of the quantum diffraction (non-locality) and of the collisional damping on the test charge's potential is considered. It is shown that electrons are unable to provide screening of the test charge if the frequency of the induced single particle oscillations larger than the electron-plasma frequency. In the opposite case of low frequencies, the potential of the test charge changes its sign if the screening by ions is neglected.

A Radiation Chemistry Code Based on the Greens Functions of the Diffusion Equation

NASA Technical Reports Server (NTRS)

Plante, Ianik; Wu, Honglu

2014-01-01

Ionizing radiation produces several radiolytic species such as.OH, e-aq, and H. when interacting with biological matter. Following their creation, radiolytic species diffuse and chemically react with biological molecules such as DNA. Despite years of research, many questions on the DNA damage by ionizing radiation remains, notably on the indirect effect, i.e. the damage resulting from the reactions of the radiolytic species with DNA. To simulate DNA damage by ionizing radiation, we are developing a step-by-step radiation chemistry code that is based on the Green's functions of the diffusion equation (GFDE), which is able to follow the trajectories of all particles and their reactions with time. In the recent years, simulations based on the GFDE have been used extensively in biochemistry, notably to simulate biochemical networks in time and space and are often used as the "gold standard" to validate diffusion-reaction theories. The exact GFDE for partially diffusion-controlled reactions is difficult to use because of its complex form. Therefore, the radial Green's function, which is much simpler, is often used. Hence, much effort has been devoted to the sampling of the radial Green's functions, for which we have developed a sampling algorithm This algorithm only yields the inter-particle distance vector length after a time step; the sampling of the deviation angle of the inter-particle vector is not taken into consideration. In this work, we show that the radial distribution is predicted by the exact radial Green's function. We also use a technique developed by Clifford et al. to generate the inter-particle vector deviation angles, knowing the inter-particle vector length before and after a time step. The results are compared with those predicted by the exact GFDE and by the analytical angular functions for free diffusion. This first step in the creation of the radiation chemistry code should help the understanding of the contribution of the indirect effect in the formation of DNA damage and double-strand breaks.

Spontaneous emergence of catalytic cycles with colloidal spheres

NASA Astrophysics Data System (ADS)

Zeravcic, Zorana; Brenner, Michael P.

2017-04-01

Colloidal particles endowed with specific time-dependent interactions are a promising route for realizing artificial materials that have the properties of living ones. Previous work has demonstrated how this system can give rise to self-replication. Here, we introduce the process of colloidal catalysis, in which clusters of particles catalyze the creation of other clusters through templating reactions. Surprisingly, we find that simple templating rules generically lead to the production of huge numbers of clusters. The templating reactions among this sea of clusters give rise to an exponentially growing catalytic cycle, a specific realization of Dyson’s notion of an exponentially growing metabolism. We demonstrate this behavior with a fixed set of interactions between particles chosen to allow a catalysis of a specific six-particle cluster from a specific seven-particle cluster, yet giving rise to the catalytic production of a sea of clusters of sizes between 2 and 11 particles. The fact that an exponentially growing cycle emerges naturally from such a simple scheme demonstrates that the emergence of exponentially growing metabolisms could be simpler than previously imagined.

IMPLEMENTATION OF SINK PARTICLES IN THE ATHENA CODE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gong Hao; Ostriker, Eve C., E-mail: hgong@astro.umd.edu, E-mail: eco@astro.princeton.edu

2013-01-15

We describe the implementation and tests of sink particle algorithms in the Eulerian grid-based code Athena. The introduction of sink particles enables the long-term evolution of systems in which localized collapse occurs, and it is impractical (or unnecessary) to resolve the accretion shocks at the centers of collapsing regions. We discuss the similarities and differences of our methods compared to other implementations of sink particles. Our criteria for sink creation are motivated by the properties of the Larson-Penston collapse solution. We use standard particle-mesh methods to compute particle and gas gravity together. Accretion of mass and momenta onto sinks ismore » computed using fluxes returned by the Riemann solver. A series of tests based on previous analytic and numerical collapse solutions is used to validate our method and implementation. We demonstrate use of our code for applications with a simulation of planar converging supersonic turbulent flow, in which multiple cores form and collapse to create sinks; these sinks continue to interact and accrete from their surroundings over several Myr.« less

FY07 LDRD Final Report A Fracture Mechanics and Tribology Approach to Understanding Subsurface Damage on Fused Silica during Grinding and Polishing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suratwala, T I; Miller, P E; Menapace, J A

The objective of this work is to develop a solid scientific understanding of the creation and characteristics of surface fractures formed during the grinding and polishing of brittle materials, specifically glass. In this study, we have experimentally characterized the morphology, number density, and depth distribution of various surface cracks as a function of various grinding and polishing processes (blanchard, fixed abrasive grinding, loose abrasive, pitch polishing and pad polishing). Also, the effects of load, abrasive particle (size, distribution, foreign particles, geometry, velocity), and lap material (pitch, pad) were examined. The resulting data were evaluated in terms of indentation fracture mechanicsmore » and tribological interactions (science of interacting surfaces) leading to several models to explain crack distribution behavior of ground surfaces and to explain the characteristics of scratches formed during polishing. This project has greatly advanced the scientific knowledge of microscopic mechanical damage occurring during grinding and polishing and has been of general interest. This knowledge-base has also enabled the design and optimization of surface finishing processes to create optical surfaces with far superior laser damage resistance. There are five major areas of scientific progress as a result of this LDRD. They are listed in Figure 1 and described briefly in this summary below. The details of this work are summarized through a number of published manuscripts which are included this LDRD Final Report. In the first area of grinding, we developed a technique to quantitatively and statistically measure the depth distribution of surface fractures (i.e., subsurface damage) in fused silica as function of various grinding processes using mixtures of various abrasive particles size distributions. The observed crack distributions were explained using a model that extended known, single brittle indentation models to an ensemble of loaded, sliding particles. The model illustrates the importance of the particle size distribution of the abrasive and its influence on the resulting crack distribution. The results of these studies are summarized in references 1-7. In the second area of polishing, we conducted a series of experiments showing the influence of rogue particles (i.e., particles in the polishing slurry that are larger than base particles) on the creation of scratches on polished surfaces. Scratches can be thought of a as a specific type of sub-surface damage. The characteristics (width, length, type of fractures, concentration) were explained in terms of the rogue particle size, the rogue particle material, and the viscoelastic properties of the lap. The results of these studies are summarized in references 6-7. In the third area of etching, we conducted experiments aimed at understanding the effect of HF:NH{sub 4}F acid etching on surface fractures on fused silica. Etching can be used as a method: (a) to expose sub-surface mechanical damage, (b) to study the morphology of specific mechanical damage occurring by indentation, and (c) to convert a ground surface containing a high concentration of sub-surface mechanical damage into surface roughness. Supporting models have been developed to describe in detail the effect of etching on the morphology and evolution of surface cracks. The results of these studies are summarized in references 8-9. In the fourth area of scratch forensics or scratch fractography, a set of new scratch forensic rule-of-thumbs were developed in order to aid the optical fabricator and process engineer to interpret the cause of scratches and digs on surfaces. The details of how these rules were developed are described in each of the references included in this summary (1-9). Figure 2 provides as a summary of some of the more commonly used rules-of-thumbs that have been developed in this study. In the fifth and final area of laser damage, we demonstrated that the removal of such surface fractures from the surface during optical fabrication can dramatically improve the laser damage.« less

Quantum Brownian motion with inhomogeneous damping and diffusion

NASA Astrophysics Data System (ADS)

Massignan, Pietro; Lampo, Aniello; Wehr, Jan; Lewenstein, Maciej

2015-03-01

We analyze the microscopic model of quantum Brownian motion, describing a Brownian particle interacting with a bosonic bath through a coupling which is linear in the creation and annihilation operators of the bath, but may be a nonlinear function of the position of the particle. Physically, this corresponds to a configuration in which damping and diffusion are spatially inhomogeneous. We derive systematically the quantum master equation for the Brownian particle in the Born-Markov approximation and we discuss the appearance of additional terms, for various polynomials forms of the coupling. We discuss the cases of linear and quadratic coupling in great detail and we derive, using Wigner function techniques, the stationary solutions of the master equation for a Brownian particle in a harmonic trapping potential. We predict quite generally Gaussian stationary states, and we compute the aspect ratio and the spread of the distributions. In particular, we find that these solutions may be squeezed (superlocalized) with respect to the position of the Brownian particle. We analyze various restrictions to the validity of our theory posed by non-Markovian effects and by the Heisenberg principle. We further study the dynamical stability of the system, by applying a Gaussian approximation to the time-dependent Wigner function, and we compute the decoherence rates of coherent quantum superpositions in position space. Finally, we propose a possible experimental realization of the physics discussed here, by considering an impurity particle embedded in a degenerate quantum gas.

Numerical studies of a model fermion-boson system

NASA Astrophysics Data System (ADS)

Cheng, T.; Gospodarczyk, E. R.; Su, Q.; Grobe, R.

2010-02-01

We study the spectral and dynamical properties of a simplified model system of interacting fermions and bosons. The spatial discretization and an effective truncation of the Hilbert space permit us to compute the distribution of the bare fermions and bosons in the energy eigenstates of the coupled system. These states represent the physical particles and are used to examine the validity of the analytical predictions by perturbation theory and by the Greenberg-Schweber approximation that assumes all fermions are at rest. As an example of our numerical framework, we examine how a bare electron can trigger the creation of a cloud of virtual bosons around. We relate this cloud to the properties of the associated energy eigenstates.

On the thermodynamics of particle-stabilized emulsions: curvature effects and catastrophic phase inversion.

PubMed

Kralchevsky, P A; Ivanov, I B; Ananthapadmanabhan, K P; Lips, A

2005-01-04

The flexural properties of a particle adsorption monolayer are investigated theoretically. If the particles are not densely packed, the interfacial bending moment and the spontaneous curvature (due to the particles) are equal to zero. The situation changes if the particles are closely packed. Then the particle adsorption monolayer possesses a significant bending moment, and the interfacial energies of bending and dilatation become comparable. In this case, the bending energy can either stabilize or destabilize the Pickering emulsion, depending on whether the particle contact angle is smaller or greater than 90 degrees . Theoretical expressions are derived for the bending moment, for the curvature elastic modulus, and for the work of interfacial deformation and emulsification. The latter is dominated by the work for creation of a new oil-water interface and by the work for particle adsorption. The curvature effects give a contribution of second order, which is significant only for emulsification at 50:50 water/oil volume fractions. A thermodynamic criterion for the type of the formed emulsion is proposed. It predicts the existence of a catastrophic phase inversion in particle-stabilized emulsions, in agreement with the experimental observations. The derived theoretical expressions could find application for interpretation of experimental data on production and stability of Pickering emulsions.

ANTIPARTICLES IN SPACE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hones, E.W. Jr.

1959-06-15

Hoyle obtained a steady-state model for an expanding universe by introducing continuous creation of matter into the field equations of general relativity. Morrison has speculated that the creation of matter throughout the universe may take place by formation of particle--antiparticle pairs which subsequently are segregated by a repulsive force between matter and anti-matter. Burbidge and Hall have estimated that the ratio of antimatter to matter in our galaxy can not exceed -- 10/sup -7/ This investigation points out that a slightly more stringent limit for this ratio is sugge sted by cosmic ray measurements. More precise information concerning the densitymore » of antiparticles in the galaxy can be obtained by carrying a simple scintillation gamma spectrometer some distance from the earth in a satelite or space probe. (A.C.)« less

High-temperature LDV seed particle development

NASA Technical Reports Server (NTRS)

Frish, Michael B.; Pierce, Vicky G.

1989-01-01

The feasibility of developing a method for making monodisperse, unagglomerated spherical particles greater than 50 nm in diameter was demonstrated. Carbonaceous particles were made by pyrolyzing ethylene with a pulsed CO2 laser, thereby creating a non-equilibrium mixture of carbon, hydrogen, hydrocarbon vapors, and unpyrolyzed ethylene. Via a complex series of reactions, the carbon and hydrocarbon vapors quickly condensed into the spherical particles. By cooling and dispersing them in a supersonic expansion immediately after their creation, the hot newly-formed spheres were prevented from colliding and coalescing, thus preventing the problem of agglomeration which as plagued other investigators studying laser-simulated particle formation. The cold particles could be left suspended in the residual gases indefinitely without agglomerating. Their uniform sizes and unagglomerated nature were visualized by collecting the particles on filters that were subsequently examined using electron microscopy. It was found the mean particle size can be coarsely controlled by varying the initial ethylene pressure, and can be finely controlled by varying the fluence (energy/unit area) with which the laser irradiates the gas. The motivating application for this research was to manufacture particles that could be used as laser Doppler velocimetry (LDV) seeds in high-temperature high-speed flows. Though the particles made in this program will not evaporate until heated to about 3000 K, and thus could serve as LDV seeds in some applications, they are not ideal when the hot atmosphere is also oxidizing. In that situation, ceramic materials would be preferable. Research performed elsewhere has demonstrated that selected ceramic materials can be manufactured by laser pyrolysis of appropriate supply gases. It is anticipated that, when the same gases are used in conjunction with the rapid cooling technique, unagglomerated spherical ceramic particles can be made with little difficulty. Such particles would also be valuable to manufacturers of ceramic or abrasive products, and this technique may find its greatest commercial potential in those areas.

High-temperature LDV seed particle development

NASA Astrophysics Data System (ADS)

Frish, Michael B.; Pierce, Vicky G.

1989-05-01

The feasibility of developing a method for making monodisperse, unagglomerated spherical particles greater than 50 nm in diameter was demonstrated. Carbonaceous particles were made by pyrolyzing ethylene with a pulsed CO2 laser, thereby creating a non-equilibrium mixture of carbon, hydrogen, hydrocarbon vapors, and unpyrolyzed ethylene. Via a complex series of reactions, the carbon and hydrocarbon vapors quickly condensed into the spherical particles. By cooling and dispersing them in a supersonic expansion immediately after their creation, the hot newly-formed spheres were prevented from colliding and coalescing, thus preventing the problem of agglomeration which as plagued other investigators studying laser-simulated particle formation. The cold particles could be left suspended in the residual gases indefinitely without agglomerating. Their uniform sizes and unagglomerated nature were visualized by collecting the particles on filters that were subsequently examined using electron microscopy. It was found the mean particle size can be coarsely controlled by varying the initial ethylene pressure, and can be finely controlled by varying the fluence (energy/unit area) with which the laser irradiates the gas. The motivating application for this research was to manufacture particles that could be used as laser Doppler velocimetry (LDV) seeds in high-temperature high-speed flows. Though the particles made in this program will not evaporate until heated to about 3000 K, and thus could serve as LDV seeds in some applications, they are not ideal when the hot atmosphere is also oxidizing. In that situation, ceramic materials would be preferable. Research performed elsewhere has demonstrated that selected ceramic materials can be manufactured by laser pyrolysis of appropriate supply gases. It is anticipated that, when the same gases are used in conjunction with the rapid cooling technique, unagglomerated spherical ceramic particles can be made with little difficulty. Such particles would also be valuable to manufacturers of ceramic or abrasive products, and this technique may find its greatest commercial potential in those areas.

Quantum simulation of an extra dimension.

PubMed

Boada, O; Celi, A; Latorre, J I; Lewenstein, M

2012-03-30

We present a general strategy to simulate a D+1-dimensional quantum system using a D-dimensional one. We analyze in detail a feasible implementation of our scheme using optical lattice technology. The simplest nontrivial realization of a fourth dimension corresponds to the creation of a bi-volume geometry. We also propose single- and many-particle experimental signatures to detect the effects of the extra dimension.

RHIC - Exploring the Universe Within

ScienceCinema

BNL

2017-12-09

A guided tour of Brookhaven's Relativistic Heavy Ion Collider (RHIC) conducted by past Laboratory Director John Marburger. RHIC is a world-class scientific research facility that began operation in 2000, following 10 years of development and construction. Hundreds of physicists from around the world use RHIC to study what the universe may have looked like in the first few moments after its creation. RHIC drives two intersecting beams of gold ions head-on, in a subatomic collision. What physicists learn from these collisions may help us understand more about why the physical world works the way it does, from the smallest subatomic particles, to the largest stars.

Fluctuation analysis of relativistic nucleus-nucleus collisions in emulsion chambers

NASA Technical Reports Server (NTRS)

Mcguire, Stephen C.

1988-01-01

An analytical technique was developed for identifying enhanced fluctuations in the angular distributions of secondary particles produced from relativistic nucleus-nucleus collisions. The method is applied under the assumption that the masses of the produced particles are small compared to their linear momenta. The importance of particles rests in the fact that enhanced fluctuations in the rapidity distributions is considered to be an experimental signal for the creation of the quark-gluon-plasma (QGP), a state of nuclear matter predicted from the quantum chromodynamics theory (QCD). In the approach, Monte Carlo simulations are employed that make use of a portable random member generator that allow the calculations to be performed on a desk-top computer. The method is illustrated with data taken from high altitude emulsion exposures and is immediately applicable to similar data from accelerator-based emulsion exposures.

Current reversals and metastable states in the infinite Bose-Hubbard chain with local particle loss

NASA Astrophysics Data System (ADS)

Kiefer-Emmanouilidis, M.; Sirker, J.

2017-12-01

We present an algorithm which combines the quantum trajectory approach to open quantum systems with a density-matrix renormalization-group scheme for infinite one-dimensional lattice systems. We apply this method to investigate the long-time dynamics in the Bose-Hubbard model with local particle loss starting from a Mott-insulating initial state with one boson per site. While the short-time dynamics can be described even quantitatively by an equation of motion (EOM) approach at the mean-field level, many-body interactions lead to unexpected effects at intermediate and long times: local particle currents far away from the dissipative site start to reverse direction ultimately leading to a metastable state with a total particle current pointing away from the lossy site. An alternative EOM approach based on an effective fermion model shows that the reversal of currents can be understood qualitatively by the creation of holon-doublon pairs at the edge of the region of reduced particle density. The doublons are then able to escape while the holes move towards the dissipative site, a process reminiscent—in a loose sense—of Hawking radiation.

Big Bang Day : The Great Big Particle Adventure - 2. Who Ordered That?

ScienceCinema

None

2017-12-09

In this series, comedian and physicist Ben Miller asks the CERN scientists what they hope to find. The atoms that make up our material world are important to us, but it turns out they aren't so significant on the cosmic stage. In fact early in the search for the stuff of atoms, researchers discovered particles that played no part in Earthly chemistry - for example particles in cosmic rays that resemble electrons (the stuff of electricity and the chemical glue in molecules) in almost all respects except that they weigh 140 times more. "Who ordered that?" one Nobel laureate demanded. They also discovered antimatter - the destructive mirror-image particles at obliterate all matter they come into contact with. In fact, the Universe is mostly made up of particles that could never make atoms, so that we are just the flotsam of the cosmos. But the main constituent of the Universe, what makes 80% of creation, has never been seen in the lab. Researchers at CERN believe they can create samples of it, down here on Earth.

Satisfying the Einstein–Podolsky–Rosen criterion with massive particles

PubMed Central

Peise, J.; Kruse, I.; Lange, K.; Lücke, B.; Pezzè, L.; Arlt, J.; Ertmer, W.; Hammerer, K.; Santos, L.; Smerzi, A.; Klempt, C.

2015-01-01

In 1935, Einstein, Podolsky and Rosen (EPR) questioned the completeness of quantum mechanics by devising a quantum state of two massive particles with maximally correlated space and momentum coordinates. The EPR criterion qualifies such continuous-variable entangled states, where a measurement of one subsystem seemingly allows for a prediction of the second subsystem beyond the Heisenberg uncertainty relation. Up to now, continuous-variable EPR correlations have only been created with photons, while the demonstration of such strongly correlated states with massive particles is still outstanding. Here we report on the creation of an EPR-correlated two-mode squeezed state in an ultracold atomic ensemble. The state shows an EPR entanglement parameter of 0.18(3), which is 2.4 s.d. below the threshold 1/4 of the EPR criterion. We also present a full tomographic reconstruction of the underlying many-particle quantum state. The state presents a resource for tests of quantum nonlocality and a wide variety of applications in the field of continuous-variable quantum information and metrology. PMID:26612105

Satisfying the Einstein-Podolsky-Rosen criterion with massive particles.

PubMed

Peise, J; Kruse, I; Lange, K; Lücke, B; Pezzè, L; Arlt, J; Ertmer, W; Hammerer, K; Santos, L; Smerzi, A; Klempt, C

2015-11-27

In 1935, Einstein, Podolsky and Rosen (EPR) questioned the completeness of quantum mechanics by devising a quantum state of two massive particles with maximally correlated space and momentum coordinates. The EPR criterion qualifies such continuous-variable entangled states, where a measurement of one subsystem seemingly allows for a prediction of the second subsystem beyond the Heisenberg uncertainty relation. Up to now, continuous-variable EPR correlations have only been created with photons, while the demonstration of such strongly correlated states with massive particles is still outstanding. Here we report on the creation of an EPR-correlated two-mode squeezed state in an ultracold atomic ensemble. The state shows an EPR entanglement parameter of 0.18(3), which is 2.4 s.d. below the threshold 1/4 of the EPR criterion. We also present a full tomographic reconstruction of the underlying many-particle quantum state. The state presents a resource for tests of quantum nonlocality and a wide variety of applications in the field of continuous-variable quantum information and metrology.

Satisfying the Einstein-Podolsky-Rosen criterion with massive particles

NASA Astrophysics Data System (ADS)

Peise, J.; Kruse, I.; Lange, K.; Lücke, B.; Pezzè, L.; Arlt, J.; Ertmer, W.; Hammerer, K.; Santos, L.; Smerzi, A.; Klempt, C.

2015-11-01

In 1935, Einstein, Podolsky and Rosen (EPR) questioned the completeness of quantum mechanics by devising a quantum state of two massive particles with maximally correlated space and momentum coordinates. The EPR criterion qualifies such continuous-variable entangled states, where a measurement of one subsystem seemingly allows for a prediction of the second subsystem beyond the Heisenberg uncertainty relation. Up to now, continuous-variable EPR correlations have only been created with photons, while the demonstration of such strongly correlated states with massive particles is still outstanding. Here we report on the creation of an EPR-correlated two-mode squeezed state in an ultracold atomic ensemble. The state shows an EPR entanglement parameter of 0.18(3), which is 2.4 s.d. below the threshold 1/4 of the EPR criterion. We also present a full tomographic reconstruction of the underlying many-particle quantum state. The state presents a resource for tests of quantum nonlocality and a wide variety of applications in the field of continuous-variable quantum information and metrology.

A signed particle formulation of non-relativistic quantum mechanics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sellier, Jean Michel, E-mail: jeanmichel.sellier@parallel.bas.bg

2015-09-15

A formulation of non-relativistic quantum mechanics in terms of Newtonian particles is presented in the shape of a set of three postulates. In this new theory, quantum systems are described by ensembles of signed particles which behave as field-less classical objects which carry a negative or positive sign and interact with an external potential by means of creation and annihilation events only. This approach is shown to be a generalization of the signed particle Wigner Monte Carlo method which reconstructs the time-dependent Wigner quasi-distribution function of a system and, therefore, the corresponding Schrödinger time-dependent wave-function. Its classical limit is discussedmore » and a physical interpretation, based on experimental evidences coming from quantum tomography, is suggested. Moreover, in order to show the advantages brought by this novel formulation, a straightforward extension to relativistic effects is discussed. To conclude, quantum tunnelling numerical experiments are performed to show the validity of the suggested approach.« less

Material fabrication using acoustic radiation forces

DOEpatents

Sinha, Naveen N.; Sinha, Dipen N.; Goddard, Gregory Russ

2015-12-01

Apparatus and methods for using acoustic radiation forces to order particles suspended in a host liquid are described. The particles may range in size from nanometers to millimeters, and may have any shape. The suspension is placed in an acoustic resonator cavity, and acoustical energy is supplied thereto using acoustic transducers. The resulting pattern may be fixed by using a solidifiable host liquid, forming thereby a solid material. Patterns may be quickly generated; typical times ranging from a few seconds to a few minutes. In a one-dimensional arrangement, parallel layers of particles are formed. With two and three dimensional transducer arrangements, more complex particle configurations are possible since different standing-wave patterns may be generated in the resonator. Fabrication of periodic structures, such as metamaterials, having periods tunable by varying the frequency of the acoustic waves, on surfaces or in bulk volume using acoustic radiation forces, provides great flexibility in the creation of new materials. Periodicities may range from millimeters to sub-micron distances, covering a large portion of the range for optical and acoustical metamaterials.

Trapped belt variations and their effects on human space flights

NASA Technical Reports Server (NTRS)

Robbins, Donald E.; Badhwar, Gautam D.

1993-01-01

Variations in the Earth's trapped (Van Allen) belts produced by solar flare particle events are not well understood. This paper reports the existence of a second proton belt and its subsequent decay as measured by a tissue-equivalent proportional counter and a particle spectrometer on five Space Shuttle flights covering an 18-month period. The creation of this second belt is attributed to the injection of particles from a solar particle event which occurred at 2246 UT, March 22, 1991. Comparisons with observations onboard the Russian Mir space station and other unmanned satellites are made. Shuttle measurements and data from other spacecraft are used to determine that the e-folding time of the peak of the second proton belt was ten months. Proton populations in the second belt returned to values of quiescent times within 18 months. The increase in absorbed dose attributed to protons in the second belt was approximately 20 percent. Passive dosimeter measurements were in good agreement with this value.

Multinode acoustic focusing for parallel flow cytometry

PubMed Central

Piyasena, Menake E.; Suthanthiraraj, Pearlson P. Austin; Applegate, Robert W.; Goumas, Andrew M.; Woods, Travis A.; López, Gabriel P.; Graves, Steven W.

2012-01-01

Flow cytometry can simultaneously measure and analyze multiple properties of single cells or particles with high sensitivity and precision. Yet, conventional flow cytometers have fundamental limitations with regards to analyzing particles larger than about 70 microns, analyzing at flow rates greater than a few hundred microliters per minute, and providing analysis rates greater than 50,000 per second. To overcome these limits, we have developed multi-node acoustic focusing flow cells that can position particles (as small as a red blood cell and as large as 107 microns in diameter) into as many as 37 parallel flow streams. We demonstrate the potential of such flow cells for the development of high throughput, parallel flow cytometers by precision focusing of flow cytometry alignment microspheres, red blood cells, and the analysis of CD4+ cellular immunophenotyping assay. This approach will have significant impact towards the creation of high throughput flow cytometers for rare cell detection applications (e.g. circulating tumor cells), applications requiring large particle analysis, and high volume flow cytometry. PMID:22239072

Porous Emitter Colloid Thruster Performance Characterization Using Optical Techniques

DTIC Science & Technology

2013-03-01

spacecraft. Liquid propellant has received a renewed interest as a viable propellant with the creation and proliferation of new ionic liquid compounds ...electrostatic gate) and collector (metallic plate) is unknown. Two factors cause this ambiguity, first, the gate needs to close fast enough to...simultaneously block all of the emitters and second, it is not directly known which emitter released the last particle hitting the collector plate

Visualization of fluid dynamics at NASA Ames

NASA Technical Reports Server (NTRS)

Watson, Val

1989-01-01

The hardware and software currently used for visualization of fluid dynamics at NASA Ames is described. The software includes programs to create scenes (for example particle traces representing the flow over an aircraft), programs to interactively view the scenes, and programs to control the creation of video tapes and 16mm movies. The hardware includes high performance graphics workstations, a high speed network, digital video equipment, and film recorders.

Student Misapplication of a Gas-Like Model to Explain Particle Movement in Heated Solids: Implications for Curriculum and Instruction towards Students' Creation and Revision of Accurate Explanatory Models

ERIC Educational Resources Information Center

Bouwma-Gearhart, Jana; Stewart, James; Brown, Keffrelyn

2009-01-01

Understanding the particulate nature of matter (PNM) is vital for participating in many areas of science. We assessed 11 students' atomic/molecular-level explanations of real-world phenomena after their participation in a modelling-based PNM unit. All 11 students offered a scientifically acceptable model regarding atomic/molecular behaviour in…

A novel type of silver nanoparticles and their advantages in toxicity testing in cell culture systems.

PubMed

Haase, A; Mantion, A; Graf, P; Plendl, J; Thuenemann, A F; Meier, W; Taubert, A; Luch, A

2012-07-01

Silver nanoparticles (SNPs) are among the most commercialized nanoparticles worldwide. Often SNP are used because of their antibacterial properties. Besides that they possess unique optic and catalytic features, making them highly interesting for the creation of novel and advanced functional materials. Despite its widespread use only little data exist in terms of possible adverse effects of SNP on human health. Conventional synthesis routes usually yield products of varying quality and property. It thus may become puzzling to compare biological data from different studies due to the great variety in sizes, coatings or shapes of the particles applied. Here, we applied a novel synthesis approach to obtain SNP of well-defined colloidal and structural properties. Being stabilized by a covalently linked small peptide, these particles are nicely homogenous, with narrow size distribution, and form monodisperse suspensions in aqueous solutions. We applied these peptide-coated SNP in two different sizes of 20 or 40 nm (Ag20Pep and Ag40Pep) and analyzed responses of THP-1-derived human macrophages while being exposed against these particles. Gold nanoparticles of similar size and coating (Au20Pep) were used for comparison. The cytotoxicity of particles was assessed by WST-1 and LDH assays, and the uptake into the cells was confirmed via transmission electron microscopy. In summary, our data demonstrate that this novel type of SNP is well suited to serve as model system for nanoparticles to be tested in toxicological studies in vitro.

Energy-momentum restrictions on the creation of Gott time machines

NASA Astrophysics Data System (ADS)

Carroll, Sean M.; Farhi, Edward; Guth, Alan H.; Olum, Ken D.

1994-11-01

The discovery by Gott of a remarkably simple spacetime with closed timelike curves (CTC's) provides a tool for investigating how the creation of time machines is prevented in classical general relativity. The Gott spacetime contains two infinitely long, parallel cosmic strings, which can equivalently be viewed as point masses in (2+1)-dimensional gravity. We examine the possibility of building such a time machine in an open universe. Specifically, we consider initial data specified on an edgeless, noncompact, spacelike hypersurface, for which the total momentum is timelike (i.e., not the momentum of a Gott spacetime). In contrast to the case of a closed universe (in which Gott pairs, although not CTC's, can be produced from the decay of stationary particles), we find that there is never enough energy for a Gott-like time machine to evolve from the specified data; it is impossible to accelerate two particles to a sufficiently high velocity. Thus, the no-CTC theorems of Tipler and Hawking are enforced in an open (2+1)-dimensional universe by a mechanism different from that which operates in a closed universe. In proving our result, we develop a simple method to understand the inequalities that restrict the result of combining momenta in (2+1)-dimensional gravity.

On the evolution of the Universe

NASA Astrophysics Data System (ADS)

Kondratenko, P. O.

2014-12-01

In this paper a model of creation and evolution of the universe in which the laws of physics are performed. The model implies that our Universe is a part of a Super-Universe as a separate layer in the fiber space, and the information communication exists between adjacent layers through the single point. During the formation of Super-Universe it was filled first a one-dimensional World of Field-time, then a two-dimensional (1+1) World was filled with energy and Planck's particles which carry the electric and magnetic charges. Completion of two-dimensional world filling leads to a "transfusion" of energy into the neighboring three-dimensional World which presents a world of known quarks which have the fractional electric charges, color charges, and spins. The next step is a "transfusion" of energy into the four-dimensional (3+1) World and the birth of the particles of this World. Evolution of this World has a completion by the brane creation of five-dimensional World. This evolution is accompanying by the birth of the entire set of stable and unstable heavy nuclei and atoms. A filling of each new layer at the fiber space does not bring the entropy into this space (i.e. cold and completely deterministic start of evolution). The proposed model supports the anthropic principle in the Universe.

Interactive three-dimensional visualization and creation of geometries for Monte Carlo calculations

NASA Astrophysics Data System (ADS)

Theis, C.; Buchegger, K. H.; Brugger, M.; Forkel-Wirth, D.; Roesler, S.; Vincke, H.

2006-06-01

The implementation of three-dimensional geometries for the simulation of radiation transport problems is a very time-consuming task. Each particle transport code supplies its own scripting language and syntax for creating the geometries. All of them are based on the Constructive Solid Geometry scheme requiring textual description. This makes the creation a tedious and error-prone task, which is especially hard to master for novice users. The Monte Carlo code FLUKA comes with built-in support for creating two-dimensional cross-sections through the geometry and FLUKACAD, a custom-built converter to the commercial Computer Aided Design package AutoCAD, exists for 3D visualization. For other codes, like MCNPX, a couple of different tools are available, but they are often specifically tailored to the particle transport code and its approach used for implementing geometries. Complex constructive solid modeling usually requires very fast and expensive special purpose hardware, which is not widely available. In this paper SimpleGeo is presented, which is an implementation of a generic versatile interactive geometry modeler using off-the-shelf hardware. It is running on Windows, with a Linux version currently under preparation. This paper describes its functionality, which allows for rapid interactive visualization as well as generation of three-dimensional geometries, and also discusses critical issues regarding common CAD systems.

Synergia: an accelerator modeling tool with 3-D space charge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amundson, James F.; Spentzouris, P.; /Fermilab

2004-07-01

High precision modeling of space-charge effects, together with accurate treatment of single-particle dynamics, is essential for designing future accelerators as well as optimizing the performance of existing machines. We describe Synergia, a high-fidelity parallel beam dynamics simulation package with fully three dimensional space-charge capabilities and a higher order optics implementation. We describe the computational techniques, the advanced human interface, and the parallel performance obtained using large numbers of macroparticles. We also perform code benchmarks comparing to semi-analytic results and other codes. Finally, we present initial results on particle tune spread, beam halo creation, and emittance growth in the Fermilab boostermore » accelerator.« less

Magnetic properties of square Py nanowires: Irradiation dose and geometry dependence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ehrmann, A., E-mail: andrea.ehrmann@fh-bielefeld.de; Blachowicz, T.; Komraus, S.

Arrays of ferromagnetic patterned nanostructures with single particle lateral dimensions between 160 nm and 400 nm were created by electron-beam lithography. The fourfold particles with rectangular-shaped walls around a square open area were produced from permalloy. Their magnetic properties were measured using the longitudinal magneto-optical Kerr effect. The article reports about the angle-dependent coercive fields and the influence of the e-beam radiation dose on sample shapes. It is shown that a broad range of radiation dose intensities enables reliable creation of nanostructures with parameters relevant for the desired magnetization reversal scenario. The experimental results are finally compared with micromagnetic simulations to explainmore » the findings.« less

Spontaneous decays of magneto-elastic excitations in non-collinear antiferromagnet (Y,Lu)MnO 3

DOE PAGES

Oh, Joosung; Le, Manh Duc; Nahm, Ho -Hyun; ...

2016-10-19

Here, magnons and phonons are fundamental quasiparticles in a solid and can be coupled together to form a hybrid quasi-particle. However, detailed experimental studies on the underlying Hamiltonian of this particle are rare for actual materials. Moreover, the anharmonicity of such magnetoelastic excitations remains largely unexplored, although it is essential for a proper understanding of their diverse thermodynamic behaviour and intrinsic zero-temperature decay. Here we show that in non-collinear antiferromagnets, a strong magnon–phonon coupling can significantly enhance the anharmonicity, resulting in the creation of magnetoelastic excitations and their spontaneous decay. By measuring the spin waves over the full Brillouin zonemore » and carrying out anharmonic spin wave calculations using a Hamiltonian with an explicit magnon–phonon coupling, we have identified a hybrid magnetoelastic mode in (Y,Lu)MnO 3 and quantified its decay rate and the exchange-striction coupling term required to produce it.« less

Large Eddy Simulation of Vertical Axis Wind Turbine wakes; Part I: from the airfoil performance to the very far wake

NASA Astrophysics Data System (ADS)

Chatelain, Philippe; Duponcheel, Matthieu; Caprace, Denis-Gabriel; Marichal, Yves; Winckelmans, Gregoire

2017-11-01

A vortex particle-mesh (VPM) method with immersed lifting lines has been developed and validated. Based on the vorticity-velocity formulation of the Navier-Stokes equations, it combines the advantages of a particle method and of a mesh-based approach. The immersed lifting lines handle the creation of vorticity from the blade elements and its early development. Large-eddy simulation (LES) of vertical axis wind turbine (VAWT) flows is performed. The complex wake development is captured in detail and over up to 15 diameters downstream: from the blades to the near-wake coherent vortices and then through the transitional ones to the fully developed turbulent far wake (beyond 10 rotor diameters). The statistics and topology of the mean flow are studied with respect to the VAWT geometry and its operating point. The computational sizes also allow insights into the detailed unsteady vortex dynamics and topological flow features, such as a recirculation region influenced by the tip speed ratio and the rotor geometry.

Synthetic Reference Materials Based on Polymer Films for the Control of Welding Fumes Composition

NASA Astrophysics Data System (ADS)

Kuznetsova, O. V.; Kuznetsova, A. N.; Begunova, L. A.

2017-04-01

Analysis of the current hygienic situation in the welding production showed that the intensification of welding processes involves the deterioration of air quality, which negatively affects the welders health. Welders are exposed to a variety of metal fumes, including manganese that may elevate the risk for neurological diseases. The control of metals concentration in the air of the working area is difficult due to the lack of reference materials. The creation of reference materials of welding fumes composition is a challenge due to chemical characteristics of their physical properties. Synthetic samples in a form of the polymer film containing powder particles of welding fumes were create. Studies on the selection of the polymer were done. Experiments proved that the qualitative materials of synthetic welding fumes are obtained by using polyvinyl alcohol. The metals concentration in the samples was determined by X-ray fluorescence analysis. The obtained data demonstrates indirectly the uniform distribution of welding fumes powder particles on the polymer film.

Cooperative dynamics in ultrasoft 2D crystals

NASA Astrophysics Data System (ADS)

Sprakel, Joris; van der Meer, Berend; Dijkstra, Marjolein; van der Gucht, Jasper

2015-03-01

The creation, annihilation, and diffusion of defects in crystal lattices play an important role during crystal melting and deformation. Although it is well understood how defects form and react when crystals are subjected to external stresses, it remains unclear how crystals cope with internal stresses. We report a study in which we create a highly localized internal stress, by means of optical tweezing, in a crystal formed from micrometer-sized colloidal spheres and directly observe how the solid reacts using microscopy. We find that, even though the excitation is highly localized, a collective dance of colloidal particles results; these collective modes take the form of closed rings or open-ended strings, depending on the sequence of events which nucleate the rearrangements. Surprisingly, we find from Brownian Dynamics simulations that these cooperative dynamics are thermally-activated modes inherent to the crystal, and can even occur through a single, sufficiently large thermal fluctuation, resulting in the irreversible displacement of 100s of particles from their lattice sites.

Overview on Sobemoviruses and a Proposal for the Creation of the Family Sobemoviridae

PubMed Central

Sõmera, Merike; Sarmiento, Cecilia; Truve, Erkki

2015-01-01

The genus Sobemovirus, unassigned to any family, consists of viruses with single-stranded plus-oriented single-component RNA genomes and small icosahedral particles. Currently, 14 species within the genus have been recognized by the International Committee on Taxonomy of Viruses (ICTV) but several new species are to be recognized in the near future. Sobemovirus genomes are compact with a conserved structure of open reading frames and with short untranslated regions. Several sobemoviruses are important pathogens. Moreover, over the last decade sobemoviruses have become important model systems to study plant virus evolution. In the current review we give an overview of the structure and expression of sobemovirus genomes, processing and functions of individual proteins, particle structure, pathology and phylogenesis of sobemoviruses as well as of satellite RNAs present together with these viruses. Based on a phylogenetic analysis we propose that a new family Sobemoviridae should be recognized including the genera Sobemovirus and Polemovirus. Finally, we outline the future perspectives and needs for the research focusing on sobemoviruses. PMID:26083319

Ultrasoft microgels displaying emergent platelet-like behaviours

NASA Astrophysics Data System (ADS)

Brown, Ashley C.; Stabenfeldt, Sarah E.; Ahn, Byungwook; Hannan, Riley T.; Dhada, Kabir S.; Herman, Emily S.; Stefanelli, Victoria; Guzzetta, Nina; Alexeev, Alexander; Lam, Wilbur A.; Lyon, L. Andrew; Barker, Thomas H.

2014-12-01

Efforts to create platelet-like structures for the augmentation of haemostasis have focused solely on recapitulating aspects of platelet adhesion; more complex platelet behaviours such as clot contraction are assumed to be inaccessible to synthetic systems. Here, we report the creation of fully synthetic platelet-like particles (PLPs) that augment clotting in vitro under physiological flow conditions and achieve wound-triggered haemostasis and decreased bleeding times in vivo in a traumatic injury model. PLPs were synthesized by combining highly deformable microgel particles with molecular-recognition motifs identified through directed evolution. In vitro and in silico analyses demonstrate that PLPs actively collapse fibrin networks, an emergent behaviour that mimics in vivo clot contraction. Mechanistically, clot collapse is intimately linked to the unique deformability and affinity of PLPs for fibrin fibres, as evidenced by dissipative particle dynamics simulations. Our findings should inform the future design of a broader class of dynamic, biosynthetic composite materials.

Using a Particle Counter to Inform the Creation of Similar Exposure Groups and Sampling Protocols in a Structural Steel Fabrication Facility

PubMed Central

Mino, James

2017-01-01

The objective of this project was to create similar exposure groups (SEGs) for occupational monitoring in a structural steel fabrication facility. Qualitative SEG formation involved worksite observation, interviews, and audits of materials and procedures. These were supplemented with preliminary task-based shop survey data collected using a condensation particle counter. A total of six SEGs were formed, with recommendations for occupational exposure sampling for five groups, as well as ambient sampling recommendations to address areas on the operational floor found to have higher particle concentrations. The combination of direct reading device data and qualitative SEG formation techniques is a valuable approach, as it contains both the monetary and temporal costs of worksite exposure monitoring. This approach also provides an empowering in-house analysis of potentially problematic areas, and results in the streamlining of occupational exposure assessment. PMID:29168761

Phonon arithmetic in a trapped ion system

NASA Astrophysics Data System (ADS)

Um, Mark; Zhang, Junhua; Lv, Dingshun; Lu, Yao; An, Shuoming; Zhang, Jing-Ning; Nha, Hyunchul; Kim, M. S.; Kim, Kihwan

2016-04-01

Single-quantum level operations are important tools to manipulate a quantum state. Annihilation or creation of single particles translates a quantum state to another by adding or subtracting a particle, depending on how many are already in the given state. The operations are probabilistic and the success rate has yet been low in their experimental realization. Here we experimentally demonstrate (near) deterministic addition and subtraction of a bosonic particle, in particular a phonon of ionic motion in a harmonic potential. We realize the operations by coupling phonons to an auxiliary two-level system and applying transitionless adiabatic passage. We show handy repetition of the operations on various initial states and demonstrate by the reconstruction of the density matrices that the operations preserve coherences. We observe the transformation of a classical state to a highly non-classical one and a Gaussian state to a non-Gaussian one by applying a sequence of operations deterministically.

Effects of diffusion in competitive contact processes on bipartite lattices

NASA Astrophysics Data System (ADS)

de Oliveira, M. M.; Fiore, C. E.

2017-05-01

We investigate the influence of particle diffusion in the two-dimension contact process (CP) with a competitive dynamics in bipartite sublattices, proposed in de Oliveira and Dickman (2011 Phys. Rev. E 84 011125). The particle creation depends on its first and second neighbors and the extinction increases according to the local density. In contrast to the standard CP model, mean-field theory and numerical simulations predict three stable phases: inactive (absorbing), active symmetric and active asymmetric, signed by distinct sublattice particle occupations. Our results from MFT and Monte Carlo simulations reveal that low diffusion rates do not destroy sublattice ordering, ensuring the maintenance of the asymmetric phase. On the other hand, for diffusion larger than a threshold value D c , the sublattice ordering is suppressed and only the usual active (symmetric)-inactive transition is presented. We also show the critical behavior and universality classes are not affected by the diffusion.

Biocolloids with ordered urease multilayer shells as enzymatic reactors.

PubMed

Lvov, Y; Caruso, F

2001-09-01

The preparation of biocolloids with organized enzyme-containing multilayer shells for exploitation as colloidal enzymatic nanoreactors is described. Urease multilayers were assembled onto submicrometer-sized polystyrene spheres by the sequential adsorption of urease and polyelectrolyte, in a predetermined order, utilizing electrostatic interactions for layer growth. The catalytic activity of the biocolloids increased proportionally with the number of urease layers deposited on the particles, demonstrating that biocolloid particles with tailored enzymatic activities can be produced. It was further found that precoating the latex spheres with nanoparticles (40-nm silica or 12-nm magnetite) enhanced both the stability (with respect to adsorption) and enzymatic activity of the urease multilayers. The presence of the magnetite nanoparticle coating also provided a magnetic function that allowed the biocolloids to be easily and rapidly separated with a permanent magnet. The fabrication of such colloids opens new avenues for the application of bioparticles and represents a promising route for the creation of complex catalytic particles.

Remote creation of hybrid entanglement between particle-like and wave-like optical qubits

NASA Astrophysics Data System (ADS)

Morin, Olivier; Huang, Kun; Liu, Jianli; Le Jeannic, Hanna; Fabre, Claude; Laurat, Julien

2014-07-01

The wave-particle duality of light has led to two different encodings for optical quantum information processing. Several approaches have emerged based either on particle-like discrete-variable states (that is, finite-dimensional quantum systems) or on wave-like continuous-variable states (that is, infinite-dimensional systems). Here, we demonstrate the generation of entanglement between optical qubits of these different types, located at distant places and connected by a lossy channel. Such hybrid entanglement, which is a key resource for a variety of recently proposed schemes, including quantum cryptography and computing, enables information to be converted from one Hilbert space to the other via teleportation and therefore the connection of remote quantum processors based upon different encodings. Beyond its fundamental significance for the exploration of entanglement and its possible instantiations, our optical circuit holds promise for implementations of heterogeneous network, where discrete- and continuous-variable operations and techniques can be efficiently combined.

Quantization of charged fields in the presence of critical potential steps

NASA Astrophysics Data System (ADS)

Gavrilov, S. P.; Gitman, D. M.

2016-02-01

QED with strong external backgrounds that can create particles from the vacuum is well developed for the so-called t -electric potential steps, which are time-dependent external electric fields that are switched on and off at some time instants. However, there exist many physically interesting situations where external backgrounds do not switch off at the time infinity. E.g., these are time-independent nonuniform electric fields that are concentrated in restricted space areas. The latter backgrounds represent a kind of spatial x -electric potential steps for charged particles. They can also create particles from the vacuum, the Klein paradox being closely related to this process. Approaches elaborated for treating quantum effects in the t -electric potential steps are not directly applicable to the x -electric potential steps and their generalization for x -electric potential steps was not sufficiently developed. We believe that the present work represents a consistent solution of the latter problem. We have considered a canonical quantization of the Dirac and scalar fields with x -electric potential step and have found in- and out-creation and annihilation operators that allow one to have particle interpretation of the physical system under consideration. To identify in- and out-operators we have performed a detailed mathematical and physical analysis of solutions of the relativistic wave equations with an x -electric potential step with subsequent QFT analysis of correctness of such an identification. We elaborated a nonperturbative (in the external field) technique that allows one to calculate all characteristics of zero-order processes, such, for example, scattering, reflection, and electron-positron pair creation, without radiation corrections, and also to calculate Feynman diagrams that describe all characteristics of processes with interaction between the in-, out-particles and photons. These diagrams have formally the usual form, but contain special propagators. Expressions for these propagators in terms of in- and out-solutions are presented. We apply the elaborated approach to two popular exactly solvable cases of x -electric potential steps, namely, to the Sauter potential and to the Klein step.

Quantum groups, roots of unity and particles on quantized Anti-de Sitter space

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinacker, Harold

1997-05-23

Quantum groups in general and the quantum Anti-de Sitter group U q(so(2,3)) in particular are studied from the point of view of quantum field theory. The author shows that if q is a suitable root of unity, there exist finite-dimensional, unitary representations corresponding to essentially all the classical one-particle representations with (half) integer spin, with the same structure at low energies as in the classical case. In the massless case for spin ≥ 1, "naive" representations are unitarizable only after factoring out a subspace of "pure gauges", as classically. Unitary many-particle representations are defined, with the correct classical limit. Furthermore,more » the author identifies a remarkable element Q in the center of U q(g), which plays the role of a BRST operator in the case of U q(so(2,3)) at roots of unity, for any spin ≥ 1. The associated ghosts are an intrinsic part of the indecomposable representations. The author shows how to define an involution on algebras of creation and anihilation operators at roots of unity, in an example corresponding to non-identical particles. It is shown how nonabelian gauge fields appear naturally in this framework, without having to define connections on fiber bundles. Integration on Quantum Euclidean space and sphere and on Anti-de Sitter space is studied as well. The author gives a conjecture how Q can be used in general to analyze the structure of indecomposable representations, and to define a new, completely reducible associative (tensor) product of representations at roots of unity, which generalizes the standard "truncated" tensor product as well as many-particle representations.« less

Measurement-based quantum computation on two-body interacting qubits with adiabatic evolution.

PubMed

Kyaw, Thi Ha; Li, Ying; Kwek, Leong-Chuan

2014-10-31

A cluster state cannot be a unique ground state of a two-body interacting Hamiltonian. Here, we propose the creation of a cluster state of logical qubits encoded in spin-1/2 particles by adiabatically weakening two-body interactions. The proposal is valid for any spatial dimensional cluster states. Errors induced by thermal fluctuations and adiabatic evolution within finite time can be eliminated ensuring fault-tolerant quantum computing schemes.

Magnetoresponsive discoidal photonic crystals toward active color pigments.

PubMed

Lee, Hye Soo; Kim, Ju Hyeon; Lee, Joon-Seok; Sim, Jae Young; Seo, Jung Yoon; Oh, You-Kwan; Yang, Seung-Man; Kim, Shin-Hyun

2014-09-03

Photonic microdisks with a multilayered structure are designed from photocurable suspensions by step-by-step photolithography. In each step of photolithography, either a colloidal photonic crystal or a magnetic-particle-laden layer is stacked over the windows of a photomask. Sequential photolithography enables the creation of multilayered photonic microdisks that have brilliant structural colors that can be switched by an external magnetic field. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Regiospecific Nucleation and Growth of Silane Coupling Agent Droplets onto Colloidal Particles

PubMed Central

2017-01-01

Nucleation-and-growth processes are used extensively in the synthesis of spherical colloids, and more recently regiospecific nucleation-and-growth processes have been exploited to prepare more complex colloids such as patchy particles. We demonstrate that surface geometry alone can be made to play the dominant role in determining the final particle geometry in such syntheses, meaning that intricate chemical surface patternings are not required. We present a synthesis method for “lollipop”-shaped colloidal heterodimers (patchy particles), combining a recently published nucleation-and-growth technique with our recent findings that particle geometry influences the locus of droplet adsorption onto anisotropic template particles. Specifically, 3-methacryloxypropyl trimethoxysilane (MPTMS) is nucleated and grown onto bullet-shaped and nail-shaped colloids. The shape of the template particle can be chosen such that the MPTMS adsorbs regiospecifically onto the flat ends. In particular, we find that particles with a wider base increase the range of droplet volumes for which the minimum in the free energy of adsorption is located at the flat end of the particle compared with bullet-shaped particles of the same aspect ratio. We put forward an extensive analysis of the synthesis mechanism and experimentally determine the physical properties of the heterodimers, supported by theoretical simulations. Here we numerically optimize, for the first time, the shape of finite-sized droplets as a function of their position on the rod-like silica particle surface. We expect that our findings will give an impulse to complex particle creation by regiospecific nucleation and growth. PMID:29057028

Efficiency of Synchrotron Radiation from Rotation-powered Pulsars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kisaka, Shota; Tanaka, Shuta J., E-mail: kisaka@phys.aoyama.ac.jp, E-mail: sjtanaka@center.konan-u.ac.jp

2017-03-01

Synchrotron radiation is widely considered to be the origin of the pulsed non-thermal emissions from rotation-powered pulsars in optical and X-ray bands. In this paper, we study the synchrotron radiation emitted by the created electron and positron pairs in the pulsar magnetosphere to constrain the energy conversion efficiency from the Poynting flux to the particle energy flux. We model two pair creation processes, two-photon collision, which efficiently works in young γ -ray pulsars (≲10{sup 6} year), and magnetic pair creation, which is the dominant process to supply pairs in old pulsars (≳10{sup 6} year). Using the analytical model, we derivemore » the maximum synchrotron luminosity as a function of the energy conversion efficiency. From the comparison with observations, we find that the energy conversion efficiency to the accelerated particles should be an order of unity in the magnetosphere, even though we make a number of the optimistic assumptions to enlarge the synchrotron luminosity. In order to explain the luminosity of the non-thermal X-ray/optical emission from pulsars with low spin-down luminosity L {sub sd} ≲ 10{sup 34} erg s{sup −1}, non-dipole magnetic field components should be dominant at the emission region. For the γ -ray pulsars with L {sub sd} ≲ 10{sup 35} erg s{sup −1}, observed γ -ray to X-ray and optical flux ratios are much higher than the flux ratio between curvature and the synchrotron radiations. We discuss some possibilities such as the coexistence of multiple accelerators in the magnetosphere as suggested from the recent numerical simulation results. The obtained maximum luminosity would be useful to select observational targets in X-ray and optical bands.« less

Is ΛCDM an effective CCDM cosmology?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lima, J.A.S.; Santos, R.C.; Cunha, J.V., E-mail: limajas@astro.iag.usp.br, E-mail: cliviars@gmail.com, E-mail: jvcunha@ufpa.br

We show that a cosmology driven by gravitationally induced particle production of all non-relativistic species existing in the present Universe mimics exactly the observed flat accelerating ΛCDM cosmology with just one dynamical free parameter. This kind of scenario includes the creation cold dark matter (CCDM) model [1] as a particular case and also provides a natural reduction of the dark sector since the vacuum component is not needed to accelerate the Universe. The new cosmic scenario is equivalent to ΛCDM both at the background and perturbative levels and the associated creation process is also in agreement with the universality ofmore » the gravitational interaction and equivalence principle. Implicitly, it also suggests that the present day astronomical observations cannot be considered the ultimate proof of cosmic vacuum effects in the evolved Universe because ΛCDM may be only an effective cosmology.« less

Creation of Two-Particle Entanglement in Open Macroscopic Quantum Systems

DOE PAGES

Merkli, M.; Berman, G. P.; Borgonovi, F.; ...

2012-01-01

We considermore » an open quantum system of N not directly interacting spins (qubits) in contact with both local and collective thermal environments. The qubit-environment interactions are energy conserving. We trace out the variables of the thermal environments and N − 2 qubits to obtain the time-dependent reduced density matrix for two arbitrary qubits. We numerically simulate the reduced dynamics and the creation of entanglement (concurrence) as a function of the parameters of the thermal environments and the number of qubits, N . Our results demonstrate that the two-qubit entanglement generally decreases as N increases. We show analytically that, in the limit N → ∞ , no entanglement can be created. This indicates that collective thermal environments cannot create two-qubit entanglement when many qubits are located within a region of the size of the environment coherence length. We discuss possible relevance of our consideration to recent quantum information devices and biosystems.« less

A combined qualitative-quantitative approach for the identification of highly co-creative technology-driven firms

NASA Astrophysics Data System (ADS)

Milyakov, Hristo; Tanev, Stoyan; Ruskov, Petko

2011-03-01

Value co-creation, is an emerging business and innovation paradigm, however, there is not enough clarity on the distinctive characteristics of value co-creation as compared to more traditional value creation approaches. The present paper summarizes the results from an empirically-derived research study focusing on the development of a systematic procedure for the identification of firms that are active in value co-creation. The study is based on a sample 273 firms that were selected for being representative of the breadth of their value co-creation activities. The results include: i) the identification of the key components of value co-creation based on a research methodology using web search and Principal Component Analysis techniques, and ii) the comparison of two different classification techniques identifying the firms with the highest degree of involvement in value co-creation practices. To the best of our knowledge this is the first study using sophisticated data collection techniques to provide a classification of firms according to the degree of their involvement in value co-creation.

Experimental confirmation of stable, small-debye-length, pure-electron-plasma equilibria in a stellarator.

PubMed

Kremer, J P; Pedersen, T Sunn; Lefrancois, R G; Marksteiner, Q

2006-09-01

The creation of the first small-Debye length, low temperature pure electron plasmas in a stellarator is reported. A confinement time of 20 ms has been measured. The long confinement time implies the existence of macroscopically stable equilibria and that the single particle orbits are well confined despite the lack of quasisymmetry in the device, the Columbia non-neutral torus. This confirms the beneficial confinement effects of strong electric fields and the resulting rapid E x B rotation of the electrons. The particle confinement time is presently limited by the presence of bulk insulating materials in the plasma, rather than any intrinsic plasma transport processes. A nearly flat temperature profile is seen in the inner part of the plasma.

Hierarchical Self-Assembly of Light Guided Spinning Microgears

NASA Astrophysics Data System (ADS)

Aubret, Antoine; Youssef, Mena; Sacanna, Stefano; Palacci, Jeremie; Sacanna Group, NYU Team

2017-11-01

In this work, we demonstrate the self-assembly of microgears obtained from the guided construction of tailored self-propelled particles used as primary building blocks. The experiment relies on our control of phoretic phenomena: the migration of particles in a solute gradient. We activate a photocatalytic material, the hematite, and trigger the decomposition of hydrogen peroxide to set concentration gradient. We use this effect to engineer phototactic swimmers, attracted to the region of high illumination. We guide the swimmers to form robust and highly persistent microgears. They interact with each other through hydrodynamics and diffusiophoretically through the chemical clouds of fuel consumption. Multiple rotors are studied and we specifically address the dynamics of two rotors. We show that the microgears move collectively or synchronize thanks to the interaction of their chemical clouds. Increasing the number of microrotors (N = 2 - 7), we form an active crystal which can rotate, re-organize, change shape, and exhibit phase synchronization between its individual components. Such crystal made of non-equilibrium rotating gears at the microscale is unique. Our study paves the way for better understanding and control of emergent phenomena in collection of active spinning particles. It is a promising avenue for the creation of cutting-edge materials using emergent behavior from hierarchical self-assembly to unveil untapped functionalities. This work is supported by NSF CAREER DMR 1554724.

Gravity Does it: Redshift of Light from the Galaxies Yes, Expanding Universe NO!

NASA Astrophysics Data System (ADS)

Malhotra, Satish

2018-04-01

In the history of physics, ideas on space and time have changed the course of physics a number of times; this is another such event. We postulate 'space and time' as a flow of quantum gravity energy, having the absolute velocity c (same as velocity of light), where time is the delay in the spread of space (delay from infinite velocity flow, when there would be no time), such a flow has to have a reverse cycle, as energy creating it (howsoever large it might be has to be limited and limited energy can only create a limited space and time energy spread) and the reverse cycle is that of the creation of fundamental particles. This explanation of the universe tells us that the idea of an expanding universe is only an appearance, the argument, in brief, is as follows: One, the universe is so large that we cannot see the edges, light from the edges, the reality is non-observable. Two, the process is dark, it is beyond observation, the process of creation of charge (the reflection of light starts with it), the space energy flow process is in the range of invisible (before charge emerged); it is the elusive dark energy of the universe; we never connected space and time to flow of energy, and so did not find its connection either to its limitedness or to its dark nature (dark energy). Three, the space energy flow has a reverse process which leads to the formation of fundamental particles we have not included it in the totality of the processes of the universe, the former is the dark energy and the initial part of the reverse process—till it reaches the state of ionisation-- is dark matter. In the continuity of the cycle of space flow and its reversal to matter forms, ionisation happens at a particular point and visibility comes through along with; ionisation here is a later event (which is a part of the reverse process, enters visibility).It is this reverse process which creates fundamental particles (no big bang creation. With no idea of space as energy flow and no idea of the reverse process, physicists could never take the step in the direction of the correct understanding of the 'dark energy' or 'dark matter'.

Scientific Creationism: A Case Study.

ERIC Educational Resources Information Center

Pipho, Chris

1981-01-01

Describes the current movement to elevate biblical creationism to a scientific theory to be taught alongside evolution in the public schools. Focuses on the strategies and influence of pro "scientific creationism" groups and reviews pending legislation that would mandate equal teaching time for creationism. (GC)

Formation of precise 2D Au particle arrays via thermally induced dewetting on pre-patterned substrates

PubMed Central

Ji, Ran

2011-01-01

Summary The fabrication of precise 2D Au nanoparticle arrays over a large area is presented. The technique was based on pre-patterning of the substrate before the deposition of a thin Au film, and the creation of periodic particle arrays by subsequent dewetting induced by annealing. Two types of pre-patterned substrates were used: The first comprised an array of pyramidal pits and the second an array of circular holes. For the dewetting of Au films on the pyramidal pit substrate, the structural curvature-driven diffusion cooperates with capillarity-driven diffusion, resulting in the formation of precise 2D particle arrays for films within a structure dependent thickness-window. For the dewetting of Au films on the circular hole substrate, the periodic discontinuities in the films, induced by the deposition, can limit the diffusion paths and lead to the formation of one particle per individual separated region (holes or mesas between holes), and thus, result in the evolution of precise 2D particle arrays. The influence of the pre-patterned structures and the film thickness is analyzed and discussed. For both types of pre-patterned substrate, the Au film thickness had to be adjusted in a certain thickness-window in order to achieve the precise 2D particle arrays. PMID:21977445

Lasing in circuit quantum electrodynamics with strong noise

NASA Astrophysics Data System (ADS)

Marthaler, M.; Utsumi, Y.; Golubev, D. S.

2015-05-01

We study a model which can describe a superconducting single-electron transistor or a double quantum dot coupled to a transmission-line oscillator. In both cases the degree of freedom is given by a charged particle, which couples strongly to the electromagnetic environment or phonons. We consider the case where a lasing condition is established and study the dependence of the average photon number in the resonator on the spectral function of the electromagnetic environment. We focus on three important cases: a strongly coupled environment with a small cutoff frequency, a structured environment peaked at a specific frequency, and 1 /f noise. We find that the electromagnetic environment can have a substantial impact on the photon creation. Resonance peaks are in general broadened and additional resonances can appear.

A Two-Step Integrated Theory of Everything (TOE)

NASA Astrophysics Data System (ADS)

Colella, Antonio

2017-01-01

Two opposing TOE visions are my Two-Step (physics/math) and Hawking's single math step. My Two-Step should replace the single step because of the latter's near zero results after a century of attempts. My physics step had 3 goals. First ``Everything'' was defined as 20 interrelated amplified theories (e.g. string, Higgs forces, spontaneous symmetry breaking, particle decays, dark matter, dark energy, stellar black holes) and their intimate physical interrelationships. Amplifications of Higgs forces theory (e.g. matter particles and their associated Higgs forces were one and inseparable, spontaneous symmetry breaking was bidirectional and caused by high temperatures not Higgs forces, and sum of 8 Higgs forces of 8 permanent matter particles was dark energy) were key to my Two-Step TOE. The second goal answered all outstanding physics questions: what were Higgs forces, dark energy, dark matter, stellar black holes, our universe's creation, etc.? The third goal provided correct inputs for the two part second math step, an E8 Lie algebra for particles and an N-body cosmology simulation (work in progress). Scientific advancement occurs only if the two opposing TOEs are openly discussed/debated.

Magnetic assembly of nonmagnetic particles into photonic crystal structures.

PubMed

He, Le; Hu, Yongxing; Kim, Hyoki; Ge, Jianping; Kwon, Sunghoon; Yin, Yadong

2010-11-10

We report the rapid formation of photonic crystal structures by assembly of uniform nonmagnetic colloidal particles in ferrofluids using external magnetic fields. Magnetic manipulation of nonmagnetic particles with size down to a few hundred nanometers, suitable building blocks for producing photonic crystals with band gaps located in the visible regime, has been difficult due to their weak magnetic dipole moment. Increasing the dipole moment of magnetic holes has been limited by the instability of ferrofluids toward aggregation at high concentration or under strong magnetic field. By taking advantage of the superior stability of highly surface-charged magnetite nanocrystal-based ferrofluids, in this paper we have been able to successfully assemble 185 nm nonmagnetic polymer beads into photonic crystal structures, from 1D chains to 3D assemblies as determined by the interplay of magnetic dipole force and packing force. In a strong magnetic field with large field gradient, 3D photonic crystals with high reflectance (83%) in the visible range can be rapidly produced within several minutes, making this general strategy promising for fast creation of large-area photonic crystals using nonmagnetic particles as building blocks.

Cosmology of Universe Particles and Beyond

NASA Astrophysics Data System (ADS)

Xu, Wei

2016-06-01

For the first time in history, all properties of cosmology particles are uncovered and described concisely and systematically, known as the elementary particles in contemporary physics.Aligning with the synthesis of the virtual and physical worlds in a hierarchical taxonomy of the universe, this theory refines the topology framework of cosmology, and presents a new perspective of the Yin Yang natural laws that, through the processes of creation and reproduction, the fundamental elements generate an infinite series of circular objects and a Yin Yang duality of dynamic fields that are sequenced and transformed states of matter between the virtual and physical worlds.Once virtual objects are transformed, they embody various enclaves of energy states, known as dark energy, quarks, leptons, bosons, protons, and neutrons, characterized by their incentive oscillations of timestate variables in a duality of virtual realities: energy and time, spin and charge, mass and space, symmetry and antisymmetry.As a consequence, it derives the fully-scaled quantum properties of physical particles in accordance with numerous historical experiments, and has overcome the limitations of uncertainty principle and the Standard Model, towards concisely exploring physical nature and beyond...

Creation of high-energy electron tails by means of the modified two-stream instability

NASA Technical Reports Server (NTRS)

Tanaka, M.; Papadopoulos, K.

1983-01-01

Particle simulations of the modified two-stream instability demonstrate strong electron acceleration rather than bulk heating when the relative drift speed is below a critical speed Vc. A very interesting nonlinear mode transition and autoresonance acceleration process is observed which accelerates the electrons much above the phase speed of the linearly unstable modes. Simple criteria are presented that predict the value of Vc and the number density of the accelerated electrons.

Pair production in classical Stueckelberg-Horwitz-Piron electrodynamics

NASA Astrophysics Data System (ADS)

Land, Martin

2015-05-01

We calculate pair production from bremsstrahlung as a classical effect in Stueckelberg-Horwitz electrodynamics. In this framework, worldlines are traced out dynamically through the evolution of events xμ(τ) parameterized by a chronological time τ that is independent of the spacetime coordinates. These events, defined in an unconstrained 8D phase space, interact through five τ-dependent gauge fields induced by the event evolution. The resulting theory differs in its underlying mechanics from conventional electromagnetism, but coincides with Maxwell theory in an equilibrium limit. In particular, the total mass-energy-momentum of particles and fields is conserved, but the mass-shell constraint is lifted from individual interacting events, so that the Feynman-Stueckelberg interpretation of pair creation/annihilation is implemented in classical mechanics. We consider a three-stage interaction which when parameterized by the laboratory clock x0 appears as (1) particle-1 scatters on a heavy nucleus to produce bremsstrahlung, (2) the radiation field produces a particle/antiparticle pair, (3) the antiparticle is annihilated with particle-2 in the presence of a second heavy nucleus. When parameterized in chronological time τ, the underlying process develops as (1) particle-2 scatters on the second nucleus and begins evolving backward in time with negative energy, (2) particle-1 scatters on the first nucleus and releases bremsstrahlung, (3) particle-2 absorbs radiation which returns it to forward time evolution with positive energy.

Multiplicity and transverse momentum evolution of charge-dependent correlations in pp, p-Pb, and Pb-Pb collisions at the LHC

NASA Astrophysics Data System (ADS)

Adam, J.; Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.; Agnello, M.; Agrawal, N.; Ahammed, Z.; Ahn, S. U.; Aiola, S.; Akindinov, A.; Alam, S. N.; Aleksandrov, D.; Alessandro, B.; Alexandre, D.; Alfaro Molina, R.; Alici, A.; Alkin, A.; Almaraz, J. R. M.; Alme, J.; Alt, T.; Altinpinar, S.; Altsybeev, I.; Alves Garcia Prado, C.; Andrei, C.; Andronic, A.; Anguelov, V.; Anielski, J.; Antičić, T.; Antinori, F.; Antonioli, P.; Aphecetche, L.; Appelshäuser, H.; Arcelli, S.; Arnaldi, R.; Arnold, O. W.; Arsene, I. C.; Arslandok, M.; Audurier, B.; Augustinus, A.; Averbeck, R.; Azmi, M. D.; Badalà, A.; Baek, Y. W.; Bagnasco, S.; Bailhache, R.; Bala, R.; Baldisseri, A.; Baral, R. C.; Barbano, A. M.; Barbera, R.; Barile, F.; Barnaföldi, G. G.; Barnby, L. S.; Barret, V.; Bartalini, P.; Barth, K.; Bartke, J.; Bartsch, E.; Basile, M.; Bastid, N.; Basu, S.; Bathen, B.; Batigne, G.; Batista Camejo, A.; Batyunya, B.; Batzing, P. C.; Bearden, I. G.; Beck, H.; Bedda, C.; Behera, N. K.; Belikov, I.; Bellini, F.; Bello Martinez, H.; Bellwied, R.; Belmont, R.; Belmont-Moreno, E.; Belyaev, V.; Bencedi, G.; Beole, S.; Berceanu, I.; Bercuci, A.; Berdnikov, Y.; Berenyi, D.; Bertens, R. A.; Berzano, D.; Betev, L.; Bhasin, A.; Bhat, I. R.; Bhati, A. K.; Bhattacharjee, B.; Bhom, J.; Bianchi, L.; Bianchi, N.; Bianchin, C.; Bielčík, J.; Bielčíková, J.; Bilandzic, A.; Biswas, R.; Biswas, S.; Bjelogrlic, S.; Blair, J. T.; Blau, D.; Blume, C.; Bock, F.; Bogdanov, A.; Bøggild, H.; Boldizsár, L.; Bombara, M.; Book, J.; Borel, H.; Borissov, A.; Borri, M.; Bossú, F.; Botta, E.; Böttger, S.; Bourjau, C.; Braun-Munzinger, P.; Bregant, M.; Breitner, T.; Broker, T. A.; Browning, T. A.; Broz, M.; Brucken, E. J.; Bruna, E.; Bruno, G. E.; Budnikov, D.; Buesching, H.; Bufalino, S.; Buncic, P.; Busch, O.; Buthelezi, Z.; Butt, J. B.; Buxton, J. T.; Caffarri, D.; Cai, X.; Caines, H.; Calero Diaz, L.; Caliva, A.; Calvo Villar, E.; Camerini, P.; Carena, F.; Carena, W.; Carnesecchi, F.; Castillo Castellanos, J.; Castro, A. J.; Casula, E. A. R.; Ceballos Sanchez, C.; Cepila, J.; Cerello, P.; Cerkala, J.; Chang, B.; Chapeland, S.; Chartier, M.; Charvet, J. L.; Chattopadhyay, S.; Chattopadhyay, S.; Chelnokov, V.; Cherney, M.; Cheshkov, C.; Cheynis, B.; Chibante Barroso, V.; Chinellato, D. D.; Cho, S.; Chochula, P.; Choi, K.; Chojnacki, M.; Choudhury, S.; Christakoglou, P.; Christensen, C. H.; Christiansen, P.; Chujo, T.; Chung, S. U.; Cicalo, C.; Cifarelli, L.; Cindolo, F.; Cleymans, J.; Colamaria, F.; Colella, D.; Collu, A.; Colocci, M.; Conesa Balbastre, G.; Conesa del Valle, Z.; Connors, M. E.; Contreras, J. G.; Cormier, T. M.; Corrales Morales, Y.; Cortés Maldonado, I.; Cortese, P.; Cosentino, M. R.; Costa, F.; Crochet, P.; Cruz Albino, R.; Cuautle, E.; Cunqueiro, L.; Dahms, T.; Dainese, A.; Danu, A.; Das, D.; Das, I.; Das, S.; Dash, A.; Dash, S.; De, S.; De Caro, A.; de Cataldo, G.; de Conti, C.; de Cuveland, J.; De Falco, A.; De Gruttola, D.; De Marco, N.; De Pasquale, S.; Deisting, A.; Deloff, A.; Dénes, E.; Deplano, C.; Dhankher, P.; Di Bari, D.; Di Mauro, A.; Di Nezza, P.; Diaz Corchero, M. A.; Dietel, T.; Dillenseger, P.; Divià, R.; Djuvsland, Ø.; Dobrin, A.; Domenicis Gimenez, D.; Dönigus, B.; Dordic, O.; Drozhzhova, T.; Dubey, A. K.; Dubla, A.; Ducroux, L.; Dupieux, P.; Ehlers, R. J.; Elia, D.; Engel, H.; Epple, E.; Erazmus, B.; Erdemir, I.; Erhardt, F.; Espagnon, B.; Estienne, M.; Esumi, S.; Eum, J.; Evans, D.; Evdokimov, S.; Eyyubova, G.; Fabbietti, L.; Fabris, D.; Faivre, J.; Fantoni, A.; Fasel, M.; Feldkamp, L.; Feliciello, A.; Feofilov, G.; Ferencei, J.; Fernández Téllez, A.; Ferreiro, E. G.; Ferretti, A.; Festanti, A.; Feuillard, V. J. G.; Figiel, J.; Figueredo, M. A. S.; Filchagin, S.; Finogeev, D.; Fionda, F. M.; Fiore, E. M.; Fleck, M. G.; Floris, M.; Foertsch, S.; Foka, P.; Fokin, S.; Fragiacomo, E.; Francescon, A.; Frankenfeld, U.; Fuchs, U.; Furget, C.; Furs, A.; Fusco Girard, M.; Gaardhøje, J. J.; Gagliardi, M.; Gago, A. M.; Gallio, M.; Gangadharan, D. R.; Ganoti, P.; Gao, C.; Garabatos, C.; Garcia-Solis, E.; Gargiulo, C.; Gasik, P.; Gauger, E. F.; Germain, M.; Gheata, A.; Gheata, M.; Ghosh, P.; Ghosh, S. K.; Gianotti, P.; Giubellino, P.; Giubilato, P.; Gladysz-Dziadus, E.; Glässel, P.; Goméz Coral, D. M.; Gomez Ramirez, A.; Gonzalez, V.; González-Zamora, P.; Gorbunov, S.; Görlich, L.; Gotovac, S.; Grabski, V.; Grachov, O. A.; Graczykowski, L. K.; Graham, K. L.; Grelli, A.; Grigoras, A.; Grigoras, C.; Grigoriev, V.; Grigoryan, A.; Grigoryan, S.; Grinyov, B.; Grion, N.; Gronefeld, J. M.; Grosse-Oetringhaus, J. F.; Grossiord, J.-Y.; Grosso, R.; Guber, F.; Guernane, R.; Guerzoni, B.; Gulbrandsen, K.; Gunji, T.; Gupta, A.; Gupta, R.; Haake, R.; Haaland, Ø.; Hadjidakis, C.; Haiduc, M.; Hamagaki, H.; Hamar, G.; Harris, J. W.; Harton, A.; Hatzifotiadou, D.; Hayashi, S.; Heckel, S. T.; Heide, M.; Helstrup, H.; Herghelegiu, A.; Herrera Corral, G.; Hess, B. A.; Hetland, K. F.; Hillemanns, H.; Hippolyte, B.; Hosokawa, R.; Hristov, P.; Huang, M.; Humanic, T. J.; Hussain, N.; Hussain, T.; Hutter, D.; Hwang, D. S.; Ilkaev, R.; Inaba, M.; Ippolitov, M.; Irfan, M.; Ivanov, M.; Ivanov, V.; Izucheev, V.; Jacobs, P. M.; Jadhav, M. B.; Jadlovska, S.; Jadlovsky, J.; Jahnke, C.; Jakubowska, M. J.; Jang, H. J.; Janik, M. A.; Jayarathna, P. H. S. Y.; Jena, C.; Jena, S.; Jimenez Bustamante, R. T.; Jones, P. G.; Jung, H.; Jusko, A.; Kalinak, P.; Kalweit, A.; Kamin, J.; Kang, J. H.; Kaplin, V.; Kar, S.; Karasu Uysal, A.; Karavichev, O.; Karavicheva, T.; Karayan, L.; Karpechev, E.; Kebschull, U.; Keidel, R.; Keijdener, D. L. D.; Keil, M.; Mohisin Khan, M.; Khan, P.; Khan, S. A.; Khanzadeev, A.; Kharlov, Y.; Kileng, B.; Kim, D. W.; Kim, D. J.; Kim, D.; Kim, H.; Kim, J. S.; Kim, M.; Kim, M.; Kim, S.; Kim, T.; Kirsch, S.; Kisel, I.; Kiselev, S.; Kisiel, A.; Kiss, G.; Klay, J. L.; Klein, C.; Klein, J.; Klein-Bösing, C.; Klewin, S.; Kluge, A.; Knichel, M. L.; Knospe, A. G.; Kobayashi, T.; Kobdaj, C.; Kofarago, M.; Kollegger, T.; Kolojvari, A.; Kondratiev, V.; Kondratyeva, N.; Kondratyuk, E.; Konevskikh, A.; Kopcik, M.; Kour, M.; Kouzinopoulos, C.; Kovalenko, O.; Kovalenko, V.; Kowalski, M.; Koyithatta Meethaleveedu, G.; Králik, I.; Kravčáková, A.; Kretz, M.; Krivda, M.; Krizek, F.; Kryshen, E.; Krzewicki, M.; Kubera, A. M.; Kučera, V.; Kuhn, C.; Kuijer, P. G.; Kumar, A.; Kumar, J.; Kumar, L.; Kumar, S.; Kurashvili, P.; Kurepin, A.; Kurepin, A. B.; Kuryakin, A.; Kweon, M. J.; Kwon, Y.; La Pointe, S. L.; La Rocca, P.; Ladron de Guevara, P.; Lagana Fernandes, C.; Lakomov, I.; Langoy, R.; Lara, C.; Lardeux, A.; Lattuca, A.; Laudi, E.; Lea, R.; Leardini, L.; Lee, G. R.; Lee, S.; Lehas, F.; Lemmon, R. C.; Lenti, V.; Leogrande, E.; León Monzón, I.; León Vargas, H.; Leoncino, M.; Lévai, P.; Li, S.; Li, X.; Lien, J.; Lietava, R.; Lindal, S.; Lindenstruth, V.; Lippmann, C.; Lisa, M. A.; Ljunggren, H. M.; Lodato, D. F.; Loenne, P. I.; Loginov, V.; Loizides, C.; Lopez, X.; López Torres, E.; Lowe, A.; Luettig, P.; Lunardon, M.; Luparello, G.; Maevskaya, A.; Mager, M.; Mahajan, S.; Mahmood, S. M.; Maire, A.; Majka, R. D.; Malaev, M.; Maldonado Cervantes, I.; Malinina, L.; Mal'Kevich, D.; Malzacher, P.; Mamonov, A.; Manko, V.; Manso, F.; Manzari, V.; Marchisone, M.; Mareš, J.; Margagliotti, G. V.; Margotti, A.; Margutti, J.; Marín, A.; Markert, C.; Marquard, M.; Martin, N. A.; Martin Blanco, J.; Martinengo, P.; Martínez, M. I.; Martínez García, G.; Martinez Pedreira, M.; Mas, A.; Masciocchi, S.; Masera, M.; Masoni, A.; Massacrier, L.; Mastroserio, A.; Matyja, A.; Mayer, C.; Mazer, J.; Mazzoni, M. A.; Mcdonald, D.; Meddi, F.; Melikyan, Y.; Menchaca-Rocha, A.; Meninno, E.; Mercado Pérez, J.; Meres, M.; Miake, Y.; Mieskolainen, M. M.; Mikhaylov, K.; Milano, L.; Milosevic, J.; Minervini, L. M.; Mischke, A.; Mishra, A. N.; Miśkowiec, D.; Mitra, J.; Mitu, C. M.; Mohammadi, N.; Mohanty, B.; Molnar, L.; Montaño Zetina, L.; Montes, E.; Moreira De Godoy, D. A.; Moreno, L. A. P.; Moretto, S.; Morreale, A.; Morsch, A.; Muccifora, V.; Mudnic, E.; Mühlheim, D.; Muhuri, S.; Mukherjee, M.; Mulligan, J. D.; Munhoz, M. G.; Munzer, R. H.; Murray, S.; Musa, L.; Musinsky, J.; Naik, B.; Nair, R.; Nandi, B. K.; Nania, R.; Nappi, E.; Naru, M. U.; Natal da Luz, H.; Nattrass, C.; Nayak, K.; Nayak, T. K.; Nazarenko, S.; Nedosekin, A.; Nellen, L.; Ng, F.; Nicassio, M.; Niculescu, M.; Niedziela, J.; Nielsen, B. S.; Nikolaev, S.; Nikulin, S.; Nikulin, V.; Noferini, F.; Nomokonov, P.; Nooren, G.; Noris, J. C. C.; Norman, J.; Nyanin, A.; Nystrand, J.; Oeschler, H.; Oh, S.; Oh, S. K.; Ohlson, A.; Okatan, A.; Okubo, T.; Olah, L.; Oleniacz, J.; Oliveira Da Silva, A. C.; Oliver, M. H.; Onderwaater, J.; Oppedisano, C.; Orava, R.; Ortiz Velasquez, A.; Oskarsson, A.; Otwinowski, J.; Oyama, K.; Ozdemir, M.; Pachmayer, Y.; Pagano, P.; Paić, G.; Pal, S. K.; Pan, J.; Pandey, A. K.; Papcun, P.; Papikyan, V.; Pappalardo, G. S.; Pareek, P.; Park, W. J.; Parmar, S.; Passfeld, A.; Paticchio, V.; Patra, R. N.; Paul, B.; Peitzmann, T.; Pereira Da Costa, H.; Pereira De Oliveira Filho, E.; Peresunko, D.; Pérez Lara, C. E.; Perez Lezama, E.; Peskov, V.; Pestov, Y.; Petráček, V.; Petrov, V.; Petrovici, M.; Petta, C.; Piano, S.; Pikna, M.; Pillot, P.; Pinazza, O.; Pinsky, L.; Piyarathna, D. B.; Płoskoń, M.; Planinic, M.; Pluta, J.; Pochybova, S.; Podesta-Lerma, P. L. M.; Poghosyan, M. G.; Polichtchouk, B.; Poljak, N.; Poonsawat, W.; Pop, A.; Porteboeuf-Houssais, S.; Porter, J.; Pospisil, J.; Prasad, S. K.; Preghenella, R.; Prino, F.; Pruneau, C. A.; Pshenichnov, I.; Puccio, M.; Puddu, G.; Pujahari, P.; Punin, V.; Putschke, J.; Qvigstad, H.; Rachevski, A.; Raha, S.; Rajput, S.; Rak, J.; Rakotozafindrabe, A.; Ramello, L.; Rami, F.; Raniwala, R.; Raniwala, S.; Räsänen, S. S.; Rascanu, B. T.; Rathee, D.; Read, K. F.; Redlich, K.; Reed, R. J.; Rehman, A.; Reichelt, P.; Reidt, F.; Ren, X.; Renfordt, R.; Reolon, A. R.; Reshetin, A.; Revol, J.-P.; Reygers, K.; Riabov, V.; Ricci, R. A.; Richert, T.; Richter, M.; Riedler, P.; Riegler, W.; Riggi, F.; Ristea, C.; Rocco, E.; Rodríguez Cahuantzi, M.; Rodriguez Manso, A.; Røed, K.; Rogochaya, E.; Rohr, D.; Röhrich, D.; Romita, R.; Ronchetti, F.; Ronflette, L.; Rosnet, P.; Rossi, A.; Roukoutakis, F.; Roy, A.; Roy, C.; Roy, P.; Rubio Montero, A. J.; Rui, R.; Russo, R.; Ryabinkin, E.; Ryabov, Y.; Rybicki, A.; Sadovsky, S.; Šafařík, K.; Sahlmuller, B.; Sahoo, P.; Sahoo, R.; Sahoo, S.; Sahu, P. K.; Saini, J.; Sakai, S.; Saleh, M. A.; Salzwedel, J.; Sambyal, S.; Samsonov, V.; Šándor, L.; Sandoval, A.; Sano, M.; Sarkar, D.; Scapparone, E.; Scarlassara, F.; Schiaua, C.; Schicker, R.; Schmidt, C.; Schmidt, H. R.; Schuchmann, S.; Schukraft, J.; Schulc, M.; Schuster, T.; Schutz, Y.; Schwarz, K.; Schweda, K.; Scioli, G.; Scomparin, E.; Scott, R.; Šefčík, M.; Seger, J. E.; Sekiguchi, Y.; Sekihata, D.; Selyuzhenkov, I.; Senosi, K.; Senyukov, S.; Serradilla, E.; Sevcenco, A.; Shabanov, A.; Shabetai, A.; Shadura, O.; Shahoyan, R.; Shangaraev, A.; Sharma, A.; Sharma, M.; Sharma, M.; Sharma, N.; Shigaki, K.; Shtejer, K.; Sibiriak, Y.; Siddhanta, S.; Sielewicz, K. M.; Siemiarczuk, T.; Silvermyr, D.; Silvestre, C.; Simatovic, G.; Simonetti, G.; Singaraju, R.; Singh, R.; Singha, S.; Singhal, V.; Sinha, B. C.; Sinha, T.; Sitar, B.; Sitta, M.; Skaali, T. B.; Slupecki, M.; Smirnov, N.; Snellings, R. J. M.; Snellman, T. W.; Søgaard, C.; Song, J.; Song, M.; Song, Z.; Soramel, F.; Sorensen, S.; Sozzi, F.; Spacek, M.; Spiriti, E.; Sputowska, I.; Spyropoulou-Stassinaki, M.; Stachel, J.; Stan, I.; Stefanek, G.; Stenlund, E.; Steyn, G.; Stiller, J. H.; Stocco, D.; Strmen, P.; Suaide, A. A. P.; Sugitate, T.; Suire, C.; Suleymanov, M.; Suljic, M.; Sultanov, R.; Šumbera, M.; Szabo, A.; Szanto de Toledo, A.; Szarka, I.; Szczepankiewicz, A.; Szymanski, M.; Tabassam, U.; Takahashi, J.; Tambave, G. J.; Tanaka, N.; Tangaro, M. A.; Tarhini, M.; Tariq, M.; Tarzila, M. G.; Tauro, A.; Tejeda Muñoz, G.; Telesca, A.; Terasaki, K.; Terrevoli, C.; Teyssier, B.; Thäder, J.; Thomas, D.; Tieulent, R.; Timmins, A. R.; Toia, A.; Trogolo, S.; Trombetta, G.; Trubnikov, V.; Trzaska, W. H.; Tsuji, T.; Tumkin, A.; Turrisi, R.; Tveter, T. S.; Ullaland, K.; Uras, A.; Usai, G. L.; Utrobicic, A.; Vajzer, M.; Vala, M.; Valencia Palomo, L.; Vallero, S.; Van Der Maarel, J.; Van Hoorne, J. W.; van Leeuwen, M.; Vanat, T.; Vande Vyvre, P.; Varga, D.; Vargas, A.; Vargyas, M.; Varma, R.; Vasileiou, M.; Vasiliev, A.; Vauthier, A.; Vechernin, V.; Veen, A. M.; Veldhoen, M.; Velure, A.; Venaruzzo, M.; Vercellin, E.; Vergara Limón, S.; Vernet, R.; Verweij, M.; Vickovic, L.; Viesti, G.; Viinikainen, J.; Vilakazi, Z.; Villalobos Baillie, O.; Villatoro Tello, A.; Vinogradov, A.; Vinogradov, L.; Vinogradov, Y.; Virgili, T.; Vislavicius, V.; Viyogi, Y. P.; Vodopyanov, A.; Völkl, M. A.; Voloshin, K.; Voloshin, S. A.; Volpe, G.; von Haller, B.; Vorobyev, I.; Vranic, D.; Vrláková, J.; Vulpescu, B.; Vyushin, A.; Wagner, B.; Wagner, J.; Wang, H.; Wang, M.; Watanabe, D.; Watanabe, Y.; Weber, M.; Weber, S. G.; Weiser, D. F.; Wessels, J. P.; Westerhoff, U.; Whitehead, A. M.; Wiechula, J.; Wikne, J.; Wilde, M.; Wilk, G.; Wilkinson, J.; Williams, M. C. S.; Windelband, B.; Winn, M.; Yaldo, C. G.; Yang, H.; Yang, P.; Yano, S.; Yasar, C.; Yin, Z.; Yokoyama, H.; Yoo, I.-K.; Yoon, J. H.; Yurchenko, V.; Yushmanov, I.; Zaborowska, A.; Zaccolo, V.; Zaman, A.; Zampolli, C.; Zanoli, H. J. C.; Zaporozhets, S.; Zardoshti, N.; Zarochentsev, A.; Závada, P.; Zaviyalov, N.; Zbroszczyk, H.; Zgura, I. S.; Zhalov, M.; Zhang, H.; Zhang, X.; Zhang, Y.; Zhang, C.; Zhang, Z.; Zhao, C.; Zhigareva, N.; Zhou, D.; Zhou, Y.; Zhou, Z.; Zhu, H.; Zhu, J.; Zichichi, A.; Zimmermann, A.; Zimmermann, M. B.; Zinovjev, G.; Zyzak, M.

2016-02-01

We report on two-particle charge-dependent correlations in pp, p-Pb, and Pb-Pb collisions as a function of the pseudorapidity and azimuthal angle difference, Δ η and Δ \\varphi respectively. These correlations are studied using the balance function that probes the charge creation time and the development of collectivity in the produced system. The dependence of the balance function on the event multiplicity as well as on the trigger and associated particle transverse momentum (p_{{T}}) in pp, p-Pb, and Pb-Pb collisions at √{s_{NN}}= 7, 5.02, and 2.76 TeV, respectively, are presented. In the low transverse momentum region, for 0.2 < p_{{T}} < 2.0 GeV/ c, the balance function becomes narrower in both Δ η and Δ \\varphi directions in all three systems for events with higher multiplicity. The experimental findings favor models that either incorporate some collective behavior (e.g. AMPT) or different mechanisms that lead to effects that resemble collective behavior (e.g. PYTHIA8 with color reconnection). For higher values of transverse momenta the balance function becomes even narrower but exhibits no multiplicity dependence, indicating that the observed narrowing with increasing multiplicity at low p_{{T}} is a feature of bulk particle production.

Verification of difference of ion-induced nucleation rate for kinds of ionizing radiation

NASA Astrophysics Data System (ADS)

Suzuki, A.; Masuda, K.; Takeuchi, Y.; Itow, Y.; Sako, T.; Matsumi, Y.; Nakayama, T.; Ueda, S.; Miura, K.; Kusano, K.

2014-12-01

Correlation between the global cloud cover and the galactic cosmic rays intensity has been pointed out. So as one of hypotheses, the promotion of creation of cloud condensation nuclei by cosmic rays can be considered. In this study, we have carried out verification experiment of this hypothesis using an atmospheric reaction chamber at room temperature focusing on the kind of ionizing radiation. We introduced pure air, a trace of water vapor, ozone and sulfur dioxide gas in a chamber with a volume of 75[L]. The sulfur dioxide reacts chemically in the chamber to form sulfate aerosol. After introducing the mixed gas into the chamber, it was irradiated with ultraviolet light, which simulate solar ultraviolet radiation and with anthropogenic ionizing radiation for cosmic rays, particles and new particle formation due to ion-induced nucleation was observed by measuring and recording the densities of ions and aerosol particles, the particle size distribution, the concentrations of ozone and sulfur dioxide, the temperature and the relative humidity. Here, the experimental results of aerosol nucleation rate for different types of radiation are reported. In this experiment, we conducted experiments of irradiation with heavy ions and β-rays. For ionizing radiation Sr-90 β-rays with an average energy of about 1[MeV] and a heavy ion beam from a particle accelerator facility of HIMAC at NIRS (Heavy Ion Medical Accelerator in Chiba, National Institute of Radiological Sciences) were used. The utilized heavy ion was 14N ions of 180[MeV/n] with intensities from 200[particles/spill] to 10000[particles/spill]. In this experimental run the chamber was irradiated for 10 hours and, the relationship between aerosol particle density for the particle size of > of 2.5[nm] and the generated ion density was verified. In the middle, the chamber was irradiated with β-rays for comparison. Increases in the ion density with the increase of the beam intensity were confirmed. Also, a rise in the aerosol particle density due to the ion density increase was confirmed. From this result, the ion-induced nucleation due to heavy ion irradiation could be verified. From the results of this study, ion-induced nucleation due to β-rays and heavy ion irradiation was confirmed.

Rural Job Creation. Case Studies of CETA Linkage with Economic Development.

ERIC Educational Resources Information Center

Bruno, A. Lee; Wright, L. M., Jr.

This collection contains 20 case studies illustrating some of the contributions Comprehensive Employment and Training Act (CETA) programs have made to economic development and job creation efforts in rural areas. The collection is a companion volume to the monograph entitled "Rural Job Creation--a Study of CETA Linkages with Economic…

Mechanical assessment of grit blasting surface treatments of dental implants.

PubMed

Shemtov-Yona, K; Rittel, D; Dorogoy, A

2014-11-01

This paper investigates the influence of surface preparation treatments of dental implants on their potential (mechanical) fatigue failure, with emphasis on grit-blasting. The investigation includes limited fatigue testing of implants, showing the relationship between fatigue life and surface damage condition. Those observations are corroborated by a detailed failure analysis of retrieved fracture dental implants. In both cases, the negative effect of embedded alumina particles related to the grit-blasting process is identified. The study also comprises a numerical simulation part of the grit blasting process that reveals, for a given implant material and particle size, the existence of a velocity threshold, below which the rough surface is obtained without damage, and beyond which the creation of significant surface damage will severely reduce the fatigue life, thus increasing fracture probability. The main outcome of this work is that the overall performance of dental implants comprises, in addition to the biological considerations, mechanical reliability aspects. Fatigue fracture is a central issue, and this study shows that uncontrolled surface roughening grit-blasting treatments can induce significant surface damage which accelerate fatigue fracture under certain conditions, even if those treatments are beneficial to the osseointegration process. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Creative Power of Formal Analogies in Physics: The Case of Albert Einstein

NASA Astrophysics Data System (ADS)

Gingras, Yves

2015-07-01

In order to show how formal analogies between different physical systems play an important conceptual work in physics, this paper analyzes the evolution of Einstein's thoughts on the structure of radiation from the point of view of the formal analogies he used as "lenses" to "see" through the "black box" of Planck's blackbody radiation law. A comparison is also made with his 1925 paper on the quantum gas where he used the same formal methods. Changes of formal points of view are most of the time taken for granted or passed over in silence in studies on the mathematization of physics as if they had no special significance. Revisiting Einstein's classic papers on the nature of light and matter from the angle of the various theoretical tools he used, namely entropy and energy fluctuation calculations, helps explain why he was in a unique position to make visible the particle structure of radiation and the dual (particle and wave) nature of light and matter. Finally, this case study calls attention to the more general question of the surprising creative power of formal analogies and their frequent use in theoretical physics. This aspect of intellectual creation can be useful in the teaching of physics.

Achieving Research Impact Through Co-creation in Community-Based Health Services: Literature Review and Case Study.

PubMed

Greenhalgh, Trisha; Jackson, Claire; Shaw, Sara; Janamian, Tina

2016-06-01

Co-creation-collaborative knowledge generation by academics working alongside other stakeholders-is an increasingly popular approach to aligning research and service development. It has potential for "moving beyond the ivory towers" to deliver significant societal impact via dynamic, locally adaptive community-academic partnerships. Principles of successful co-creation include a systems perspective, a creative approach to research focused on improving human experience, and careful attention to governance and process. If these principles are not followed, co-creation efforts may fail. Co-creation-collaborative knowledge generation by academics working alongside other stakeholders-reflects a "Mode 2" relationship (knowledge production rather than knowledge translation) between universities and society. Co-creation is widely believed to increase research impact. We undertook a narrative review of different models of co-creation relevant to community-based health services. We contrasted their diverse disciplinary roots and highlighted their common philosophical assumptions, principles of success, and explanations for failures. We applied these to an empirical case study of a community-based research-service partnership led by the Centre of Research Excellence in Quality and Safety in Integrated Primary-Secondary Care at the University of Queensland, Australia. Co-creation emerged independently in several fields, including business studies ("value co-creation"), design science ("experience-based co-design"), computer science ("technology co-design"), and community development ("participatory research"). These diverse models share some common features, which were also evident in the case study. Key success principles included (1) a systems perspective (assuming emergence, local adaptation, and nonlinearity); (2) the framing of research as a creative enterprise with human experience at its core; and (3) an emphasis on process (the framing of the program, the nature of relationships, and governance and facilitation arrangements, especially the style of leadership and how conflict is managed). In both the literature review and the case study, co-creation "failures" could often be tracked back to abandoning (or never adopting) these principles. All co-creation models made strong claims for significant and sustainable societal impacts as a result of the adaptive and developmental research process; these were illustrated in the case study. Co-creation models have high potential for societal impact but depend critically on key success principles. To capture the nonlinear chains of causation in the co-creation pathway, impact metrics must reflect the dynamic nature and complex interdependencies of health research systems and address processes as well as outcomes. © 2016 Milbank Memorial Fund.

The Creation and Destruction of Hf-178m2 Isomer by Neutron Interaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, Hsiao-Hua; Talbert, Willard L.; Ward, Tom

The property of the isomer state in 178m2Hf was an interesting topic in nuclear structure studies during the time period 1970 to 1980. The state at 2.446 MeV with spin and parity K π = 16 +, has a half-life of 31 years. The isomer is described as a four-quasi-particle state. The K forbidden deexcitatiion by gamma emission is the reason for long half-life. During 1980, the isomer became a troublesome issue for radiation safety workers, because this isomer can also be produced in the first wall of a fussion reactor containing tungsten and also in a tungsten beam stopmore » of a high-energy accelerator.« less

Controlled defects in semiconducting carbon nanotubes promote efficient generation and luminescence of trions.

PubMed

Brozena, Alexandra H; Leeds, Jarrett D; Zhang, Yin; Fourkas, John T; Wang, YuHuang

2014-05-27

We demonstrate efficient creation of defect-bound trions through chemical doping of controlled sp(3) defect sites in semiconducting, single-walled carbon nanotubes. These tricarrier quasi-particles luminesce almost as brightly as their parent excitons, indicating a remarkably efficient conversion of excitons into trions. Substantial populations of trions can be generated at low excitation intensities, even months after a sample has been prepared. Photoluminescence spectroscopy reveals a trion binding energy as high as 262 meV, which is substantially larger than any previously reported values. This discovery may have important ramifications not only for studying the basic physics of trions but also for the application of these species in fields such as photonics, electronics, and bioimaging.

Coherent spectroscopic methods for monitoring pathogens, genetically modified products and nanostructured materials in colloidal solution

NASA Astrophysics Data System (ADS)

Moguilnaya, T.; Suminov, Y.; Botikov, A.; Ignatov, S.; Kononenko, A.; Agibalov, A.

2017-01-01

We developed the new automatic method that combines the method of forced luminescence and stimulated Brillouin scattering. This method is used for monitoring pathogens, genetically modified products and nanostructured materials in colloidal solution. We carried out the statistical spectral analysis of pathogens, genetically modified soy and nano-particles of silver in water from different regions in order to determine the statistical errors of the method. We studied spectral characteristics of these objects in water to perform the initial identification with 95% probability. These results were used for creation of the model of the device for monitor of pathogenic organisms and working model of the device to determine the genetically modified soy in meat.

Detection scheme for acoustic quantum radiation in Bose-Einstein condensates.

PubMed

Schützhold, Ralf

2006-11-10

Based on doubly detuned Raman transitions between (meta)stable atomic or molecular states and recently developed atom counting techniques, a detection scheme for sound waves in dilute Bose-Einstein condensates is proposed whose accuracy might reach down to the level of a few or even single phonons. This scheme could open up a new range of applications including the experimental observation of quantum radiation phenomena such as the Hawking effect in sonic black-hole analogues or the acoustic analogue of cosmological particle creation.

The Multi-Universe Cosmos. The Origin and Fate of our Universe

NASA Astrophysics Data System (ADS)

Velan, Karel

18 billion yers ago our Universe, one of many in the Cosmos, emerged from a hot, dense fireball of matter and energy created in the 4-dimensional cosmic space-time from virtual particles receiving their rest mass from a powerful primordial radiation field, the missing link to any viable theory of creation. The cloud of elementary particles and radiation collapsed by gravity into a fireball until its trappped thermal radiation caused a titanic explosion that initiated the expansion and evolution of ours universe. As the universe expanded and cooled it spawned galaxies, stars, planets and life. Proven laws of physics, observationsl data and mathematical computations support the new cosmological model which proposes a large number of universes in the cosmos in varying stages of evolution

Method for facilitating the introduction of material into cells

DOEpatents

Holcomb, David E.; McKnight, Timothy E.

2000-01-01

The present invention is a method for creating a localized disruption within a boundary of a cell or structure by exposing a boundary of a cell or structure to a set of energetically charged particles while regulating the energy of the charged particles so that the charged particles have an amount of kinetic energy sufficient to create a localized disruption within an area of the boundary of the cell or structure, then upon creation of the localized disruption, the amount of kinetic energy decreases to an amount insufficient to create further damage within the cell or structure beyond the boundary. The present invention is also a method for facilitating the introduction of a material into a cell or structure using the same methodology then further exciting the area of the boundary of the cell or structure where the localized disruption was created so to create a localized temporary opening within the boundary then further introducing the material through the temporary opening into the cell or structure.

November 2013 Analysis of High Energy Electrons on the Japan Experimental Module (JEM: Kibo)

NASA Technical Reports Server (NTRS)

Badavi, Francis F.; Matsumoto, Haruhisa; Koga, Kiyokazu; Mertens, Christopher J.; Slaba, Tony C.; Norbury, John W.

2015-01-01

Albedo (precipitating/splash) electrons, created by galactic cosmic rays (GCR) interaction with the upper atmosphere move upwards away from the surface of the earth. In the past validation work these particles were often considered to have negligible contribution to astronaut radiation exposure on the International Space Station (ISS). Estimates of astronaut exposure based on the available Computer Aided Design (CAD) models of ISS consistently underestimated measurements onboard ISS when the contribution of albedo particles to exposure were neglected. Recent measurements of high energy electrons outside ISS Japan Experimental Module (JEM) using Exposed Facility (EF), Space Environment Data Acquisition Equipment - Attached Payload (SEDA-AP) and Standard DOse Monitor (SDOM), indicates the presence of high energy electrons at ISS altitude. In this presentation the status of these energetic electrons is reviewed and mechanism for the creation of these particles inside/outside South Atlantic Anomaly (SAA) region explained. In addition, limited dosimetric evaluation of these electrons at 600 MeV and 10 GeV is presented.

Voluntary medical male circumcision: a qualitative study exploring the challenges of costing demand creation in eastern and southern Africa.

PubMed

Bertrand, Jane T; Njeuhmeli, Emmanuel; Forsythe, Steven; Mattison, Sarah K; Mahler, Hally; Hankins, Catherine A

2011-01-01

This paper proposes an approach to estimating the costs of demand creation for voluntary medical male circumcision (VMMC) scale-up in 13 countries of eastern and southern Africa. It addresses two key questions: (1) what are the elements of a standardized package for demand creation? And (2) what challenges exist and must be taken into account in estimating the costs of demand creation? We conducted a key informant study on VMMC demand creation using purposive sampling to recruit seven people who provide technical assistance to government programs and manage budgets for VMMC demand creation. Key informants provided their views on the important elements of VMMC demand creation and the most effective funding allocations across different types of communication approaches (e.g., mass media, small media, outreach/mobilization). The key finding was the wide range of views, suggesting that a standard package of core demand creation elements would not be universally applicable. This underscored the importance of tailoring demand creation strategies and estimates to specific country contexts before estimating costs. The key informant interviews, supplemented by the researchers' field experience, identified these issues to be addressed in future costing exercises: variations in the cost of VMMC demand creation activities by country and program, decisions about the quality and comprehensiveness of programming, and lack of data on critical elements needed to "trigger the decision" among eligible men. Based on this study's findings, we propose a seven-step methodological approach to estimate the cost of VMMC scale-up in a priority country, based on our key assumptions. However, further work is needed to better understand core components of a demand creation package and how to cost them. Notwithstanding the methodological challenges, estimating the cost of demand creation remains an essential element in deriving estimates of the total costs for VMMC scale-up in eastern and southern Africa.

Voluntary Medical Male Circumcision: A Qualitative Study Exploring the Challenges of Costing Demand Creation in Eastern and Southern Africa

PubMed Central

Bertrand, Jane T.; Njeuhmeli, Emmanuel; Forsythe, Steven; Mattison, Sarah K.; Mahler, Hally; Hankins, Catherine A.

2011-01-01

Background This paper proposes an approach to estimating the costs of demand creation for voluntary medical male circumcision (VMMC) scale-up in 13 countries of eastern and southern Africa. It addresses two key questions: (1) what are the elements of a standardized package for demand creation? And (2) what challenges exist and must be taken into account in estimating the costs of demand creation? Methods and Findings We conducted a key informant study on VMMC demand creation using purposive sampling to recruit seven people who provide technical assistance to government programs and manage budgets for VMMC demand creation. Key informants provided their views on the important elements of VMMC demand creation and the most effective funding allocations across different types of communication approaches (e.g., mass media, small media, outreach/mobilization). The key finding was the wide range of views, suggesting that a standard package of core demand creation elements would not be universally applicable. This underscored the importance of tailoring demand creation strategies and estimates to specific country contexts before estimating costs. The key informant interviews, supplemented by the researchers' field experience, identified these issues to be addressed in future costing exercises: variations in the cost of VMMC demand creation activities by country and program, decisions about the quality and comprehensiveness of programming, and lack of data on critical elements needed to “trigger the decision” among eligible men. Conclusions Based on this study's findings, we propose a seven-step methodological approach to estimate the cost of VMMC scale-up in a priority country, based on our key assumptions. However, further work is needed to better understand core components of a demand creation package and how to cost them. Notwithstanding the methodological challenges, estimating the cost of demand creation remains an essential element in deriving estimates of the total costs for VMMC scale-up in eastern and southern Africa. PMID:22140450

DEAD ZONE IN THE POLAR-CAP ACCELERATOR OF PULSARS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Alexander Y.; Beloborodov, Andrei M.

We study plasma flows above pulsar polar caps using time-dependent simulations of plasma particles in the self-consistent electric field. The flow behavior is controlled by the dimensionless parameter {alpha} = j/c{rho}{sub GJ}, where j is the electric current density and {rho}{sub GJ} is the Goldreich-Julian charge density. The region of the polar cap where 0 < {alpha} < 1 is a {sup d}ead zone{sup -}in this zone, particle acceleration is inefficient and pair creation is not expected even for young, rapidly rotating pulsars. Pulsars with polar caps near the rotation axis are predicted to have a hollow-cone structure of radiomore » emission, as the dead zone occupies the central part of the polar cap. Our results apply to charge-separated flows of electrons (j < 0) or ions (j > 0). In the latter case, we consider the possibility of a mixed flow consisting of different ion species, and observe the development of two-stream instability. The dead zone at the polar cap is essential for the development of an outer gap near the null surface {rho}{sub GJ} = 0.« less

Dilatancy of Shear Transformations in a Colloidal Glass

NASA Astrophysics Data System (ADS)

Lu, Y. Z.; Jiang, M. Q.; Lu, X.; Qin, Z. X.; Huang, Y. J.; Shen, J.

2018-01-01

Shear transformations, as fundamental rearrangement events operating in local regions, hold the key of plastic flow of amorphous solids. Despite their importance, the dynamic features of shear transformations are far from clear, which is the focus of the present study. Here, we use a colloidal glass under shear as the prototype to directly observe the shear-transformation events in real space. By tracing the colloidal-particle rearrangements, we quantitatively determine two basic properties of shear transformations: local shear strain and dilatation (or free volume). It is revealed that the local free volume undergoes a significantly temporary increase prior to shear transformations, eventually leading to a jump of local shear strain. We clearly demonstrate that shear transformations have no memory of the initial free volume of local regions. Instead, their emergence strongly depends on the dilatancy ability of these local regions, i.e., the dynamic creation of free volume. More specifically, the particles processing the high dilatancy ability directly participate in subsequent shear transformations. These results experimentally enrich Argon's statement about the dilatancy nature of shear transformations and also shed insight into the structural origin of amorphous plasticity.

A Monte Carlo simulation code for calculating damage and particle transport in solids: The case for electron-bombarded solids for electron energies up to 900 MeV

NASA Astrophysics Data System (ADS)

Yan, Qiang; Shao, Lin

2017-03-01

Current popular Monte Carlo simulation codes for simulating electron bombardment in solids focus primarily on electron trajectories, instead of electron-induced displacements. Here we report a Monte Carol simulation code, DEEPER (damage creation and particle transport in matter), developed for calculating 3-D distributions of displacements produced by electrons of incident energies up to 900 MeV. Electron elastic scattering is calculated by using full-Mott cross sections for high accuracy, and primary-knock-on-atoms (PKAs)-induced damage cascades are modeled using ZBL potential. We compare and show large differences in 3-D distributions of displacements and electrons in electron-irradiated Fe. The distributions of total displacements are similar to that of PKAs at low electron energies. But they are substantially different for higher energy electrons due to the shifting of PKA energy spectra towards higher energies. The study is important to evaluate electron-induced radiation damage, for the applications using high flux electron beams to intentionally introduce defects and using an electron analysis beam for microstructural characterization of nuclear materials.

Using a Co-Creational Approach to Develop, Implement and Evaluate an Intervention to Promote Physical Activity in Adolescent Girls from Vocational and Technical Schools: A Case Control Study

PubMed Central

Verloigne, Maïté; Altenburg, Teatske Maria; Chinapaw, Mai Jeanette Maidy; Chastin, Sebastien; Cardon, Greet

2017-01-01

Background: As physical inactivity is particularly prevalent amongst lower-educated adolescent girls, interventions are needed. Using a co-creational approach increases their engagement and might be effective. This study aimed to: (1) describe the co-creation process, (2) evaluate how girls experienced co-creation, and (3) evaluate the effect of the co-creational interventions on physical activity, individual, sociocultural and school-based factors. Methods: Three intervention schools (n = 91) and three control schools (n = 105) across Flanders participated. A questionnaire was completed pre (September–October 2014) and post (April–May 2015). In between, sessions with a co-creation group were organised to develop and implement the intervention in each intervention school. Focus groups were conducted to evaluate the co-creational process. Results: School 1 organised sport sessions for girls, school 2 organised a fitness activity and set up a Facebook page, school 3 organised a lunch walk. Girls were positive about having a voice in developing an intervention. No significant effects were found, except for small effects on extracurricular sports participation and self-efficacy. Conclusions: Using a co-creational approach amongst adolescent girls might be a feasible approach. However, as interventions were minimal, effects were limited or undetectable. Future co-creation projects could consider the most optimal co-creation process, evaluation design and intensively test this approach. PMID:28763041

Using a Co-Creational Approach to Develop, Implement and Evaluate an Intervention to Promote Physical Activity in Adolescent Girls from Vocational and Technical Schools: A Case Control Study.

PubMed

Verloigne, Maïté; Altenburg, Teatske Maria; Chinapaw, Mai Jeanette Maidy; Chastin, Sebastien; Cardon, Greet; De Bourdeaudhuij, Ilse

2017-08-01

Background: As physical inactivity is particularly prevalent amongst lower-educated adolescent girls, interventions are needed. Using a co-creational approach increases their engagement and might be effective. This study aimed to: (1) describe the co-creation process, (2) evaluate how girls experienced co-creation, and (3) evaluate the effect of the co-creational interventions on physical activity, individual, sociocultural and school-based factors. Methods: Three intervention schools (n = 91) and three control schools (n = 105) across Flanders participated. A questionnaire was completed pre (September-October 2014) and post (April-May 2015). In between, sessions with a co-creation group were organised to develop and implement the intervention in each intervention school. Focus groups were conducted to evaluate the co-creational process. Results: School 1 organised sport sessions for girls, school 2 organised a fitness activity and set up a Facebook page, school 3 organised a lunch walk. Girls were positive about having a voice in developing an intervention. No significant effects were found, except for small effects on extracurricular sports participation and self-efficacy. Conclusions: Using a co-creational approach amongst adolescent girls might be a feasible approach. However, as interventions were minimal, effects were limited or undetectable. Future co-creation projects could consider the most optimal co-creation process, evaluation design and intensively test this approach.

Co-creating value through demand and supply integration in senior industry-observations on 33 senior enterprises in Taiwan.

PubMed

Yang, Ya-Ting; Iqbal, Usman; Chen, Ya-Mei; Su, Shyi; Chang, Yao-Mao; Handa, Yujiro; Lin, Neng-Pai; Hsu, Yi-Hsin Elsa

2016-09-01

With global population aging, great business opportunities are driven by the various needs that the elderly face in everyday living. Internet development makes information spread faster, also allows elderly and their caregivers to more easily access information and actively participate in value co-creation in the services. This study aims to investigate the designs of value co-creation by the supply and demand sides of the senior industry. This study investigated senior industry in Taiwan and analyzed bussiness models of 33 selected successful senior enterprises in 2013. We adopted series field observation, reviews of documentations, analysis of meeting records and in-depth interviews with 65 CEOs and managers. Thirty-three quality enterprises in senior industry. Sixty-five CEOs and managers in 33 senior enterprises. None. Value co-creation design, value co-creating process. We constructed a conceptual model that comprehensively describes essential aspects of value co-creation and categorized the value co-creation designs into four types applying for different business models: (i) interaction in experience spaces co-creation design, (ii) on-site interacting co-creation design, (iii) social networking platform co-creation design and (iv) empowering customers co-creation design. Through value co-creation platform design, the senior enterprises have converted the originally passive roles of the elderly and caregivers into active participants in the value co-creation process. The new paradigm of value co-creation designs not only promote innovative development during the interactive process, lead enterprises reveal and meet customers' needs but also increase markets and profits. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Entropy generation, particle creation, and quantum field theory in a cosmological spacetime: When do number and entropy increase\\?

NASA Astrophysics Data System (ADS)

Kandrup, Henry E.

1988-06-01

This paper reexamines the statistical quantum field theory of a free, minimally coupled, real scalar field Φ in a statically bounded, classical Friedmann cosmology, where the time-dependent scale factor Ω(t) tends to constant values Ω1 and Ω2 for tt2. The principal objective is to investigate the intuition that ``entropy'' S correlates with average particle number , so that increases in induced by parametric amplification manifest a one-to-one connection with increases in S. The definition of particle number Nk becomes unambiguous for t>t2 and t- is guaranteed generically to be positive only for special initial data which, in a number representation, are characterized by ``random phases'' in the sense that any relative phase for the projection of ρ(t1) into two different number eigenstates is ``random'' or ``unobservable physically,'' and averaged over in a density matrix. More importantly for the notion of entropy, random-phase initial data also guarantee an increase in the spread of P(\\{k,Nk\\}), so that, e.g., the sum of the variances Δ2N+/-k(t2) exceeds the initial Δ2N+/-k(t1). It is this increasing spread in P, rather than the growth in average numbers per se, which suggests that, for initial data manifesting random phases, SN(t2)>SN(t1), a result established rigorously in the limits of strong and weak particle creation.

Nascent Entrepreneurship and the Developing Individual: Early Entrepreneurial Competence in Adolescence and Venture Creation Success during the Career

ERIC Educational Resources Information Center

Obschonka, Martin; Silbereisen, Rainer K.; Schmitt-Rodermund, Eva; Stuetzer, Michael

2011-01-01

What predicts a person's venture creation success over the course of the career, such as making progress in the venture creation process and multiple successful venture creations? Applying a life span approach of human development, this study examined the effect of early entrepreneurial competence in adolescence, which was gathered retrospectively…

Dust dynamics in off-road vehicle trails: Measurements on 16 arid soil types, Nevada, USA.

PubMed

Goossens, Dirk; Buck, Brenda

2009-08-01

Soil analyses and measurements with the Portable In Situ Wind Erosion Laboratory (PI-SWERL) were conducted on 16 soil types in an area heavily affected by off-road vehicle (ORV) driving. Measurements were performed in ORV trails as well as on undisturbed terrain to investigate how ORV driving affects the vulnerability of a soil to emit PM10 (particles<10microm), during the driving as well as during episodes of wind erosion. Particular attention is paid to how the creation of a new trail affects those properties of the topsoil that determine its capability to emit PM10. Also, recommendations are given for adequate management of ORV-designed areas. The type of surface (sand, silt, gravel, drainage) is a key factor with respect to dust emission in an ORV trail. Trails in sand, defined in this study as the grain size fraction 63-2000microm, show higher deflation thresholds (the critical wind condition at which wind erosion starts) than the surrounding undisturbed soil. Trails in silt (2-63microm) and in drainages, on the other hand, have lower deflation thresholds than undisturbed soil. The increase in PM10 emission resulting from the creation of a new ORV trail is much higher for surfaces with silt than for surfaces with sand. Also, the creation of a new trail in silt decreases the supply limitation in the top layer: the capacity of the reservoir of emission-available PM10 increases. For sand the situation is reversed: the supply limitation increases, and the capacity of the PM10 reservoir decreases. Finally, ORV trails are characterized by a progressive coarsening of the top layer with time, but the speed of coarsening is much lower in trails in silt than in trails in sand or in drainages. The results of this study suggest that, to minimize emissions of PM10, new ORV fields should preferably be designed on sandy terrain rather than in silt areas or in drainages.

Dissipative preparation of squeezed states with ultracold atomic gases

NASA Astrophysics Data System (ADS)

Watanabe, Gentaro; Caballar, Roland Cristopher F.; Diehl, Sebastian; Mäkelä, Harri; Oberthaler, Markus

2014-05-01

We present a dissipative quantum state preparation scheme for the creation of phase- and number-squeezed states. It utilizes ultracold atoms in a double-well configuration immersed in a background BEC acting as a dissipative quantum reservoir. We derive a master equation starting from microscopic physics, and show that squeezing develops on a time scale proportional to 1 / N , where N is the number of particles in the double well. This scaling, caused by bosonic enhancement, allows us to make the time scale for the creation of squeezed states very short. Effects of the dephasing which limits the lifetime of the squeezed states can be avoided by stroboscopically switching the driving off and on. We show that this approach leads to robust stationary squeezed states. We also provide the necessary ingredients for a potential experimental implementation. NRF (No. 2012R1A1A2008028), MPS, Korea MEST, FWF (No. F4006-N16), Alfred Kordelin Foundation, Magnus Ehrnrooth Foundation, Emil Aaltonen Foundation, Academy of Finland (No. 251748).

Fistula and Survival Outcomes after Fistula Creation among Predialysis Chronic Kidney Disease Stage 5 Patients.

PubMed

Miyamoto, Masahito; Kurita, Noriaki; Suemitsu, Kotaro; Murakami, Masaaki

2017-01-01

Most guidelines recommend the creation of arteriovenous fistula (AVF) in patients with chronic kidney disease (CKD) stage 4. However, an increasing number of studies suggest that early AVF creation leads to high rates of AVF failure and death before dialysis commencement. Only the Japanese guideline recommends AVF creation at CKD stage 5; however, no data are available regarding access-related outcomes at this stage. This was a multicenter cohort study involving Japanese CKD stage 5 patients who underwent preemptive AVF creation from 2009 to 2013. The primary outcome was unnecessary AVF creation, defined as death before requiring dialysis or AVF failure before dialysis commencement. The secondary outcome was dialysis commencement. The associations with candidate predictors and the outcomes were examined. A total of 303 patients were registered. Four cases of death before dialysis and 13 cases of AVF failure before dialysis commencement were observed. A total of 283 patients who advanced to dialysis were found to have functional AVFs. The cumulative incidences of unnecessary AVF creation and dialysis commencement at 1 year were 4.8 and 89.3%, respectively. Competing risk regression analyses showed that age ≥75 years (subhazard ratio [SHR] 3.12, 95% CI 1.20-8.09) and female gender (SHR 3.31, 95% CI 1.20-9.09) were associated with unnecessary AVF creation. A low incidence of unnecessary AVF creation was revealed among Japanese patients who received AVF at CKD stage 5. These results may help clarify the natural history of unnecessary AVF creation for other countries reformatting their guidelines regarding late vascular access creation. © 2017 S. Karger AG, Basel.

CMBE v05-Implementation of a toy-model for chaos analysis of relativistic nuclear collisions at the present BNL energies

NASA Astrophysics Data System (ADS)

Grossu, I. V.; Felea, D.; Jipa, Al.; Besliu, C.; Stan, E.; Ristea, O.; Ristea, C.; Calin, M.; Esanu, T.; Bordeianu, C.; Tuturas, N.

2014-11-01

In this paper we present a new version of Chaos Many-Body Engine (CMBE) Grossu et al. (2014) [1]. Inspired by the Mean Free Path concept, we implemented a new parameter, namely the ;Mean Free Time;, which is defined as the mean time between one particle's creation and its stimulated decay. This new parameter should be understood as an effect of the nuclear environment and, as opposed to the particle lifetime, it has the advantage of not being affected by the relativistic dilation. In [2] we presented a toy-model for chaos analysis of relativistic nuclear collisions at 4.5 A GeV/c (the SKM 200 collaboration). In this work, we extended our model to 200 A GeV (the maximum BNL energy).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanislav S. Gornostayev; Jouko J. Haerkki

Examinations of polished and dry cut sections of feed and tuyere coke revealed some possible mechanisms for the physical influence of mineral compounds on the reactivity and strength of coke. It was observed that rounded particles of mineral phases that are exposed to the pore walls and surface of coke at high temperature create an inorganic cover, thus reducing the surface available for gas-solid reactions. The particles of mineral matter that have a low melting point and viscosity can affect the coke at earlier stages in the blast furnace process, acting in the upper parts of the blast furnace (BF).more » The temperature-driven redistribution of mineral phases within the coke matrix probably leads to the creation of weak spots and in general to anisotropy in its properties, thus reducing its strength. 9 refs., 2 figs., 1 tab.« less

Extraordinary Matter: Visualizing Space Plasmas and Particles

NASA Astrophysics Data System (ADS)

Barbier, S. B.; Bartolone, L.; Christian, E. R.; Eastman, T.; Lewis, E.; Thieman, J.

2010-08-01

We present an online NASA multimedia library, now in development, designed to assist educators with explaining concepts of basic particle and plasma physics. Such resources are few in number and/or difficult to locate, and most do not provide suitable context. On our Extraordinary Matter site, each product will be accompanied by an explanation at a reading level matching the concept's educational level, link to the source, educational standards addressed, file size, use restrictions, credits, format(s), creation date and, optionally, associated educational activities and other relevant information and links. The site will target grades 9-14 and the equivalent in informal education and outreach. Products are intended to stand alone, making them adaptable to the widest range of uses. This project is funded by the NASA EPOESS Program in response to NRA NNH08ZDA001N for ROSES-2008.

Vortex and half-vortex dynamics in a nonlinear spinor quantum fluid

PubMed Central

Dominici, Lorenzo; Dagvadorj, Galbadrakh; Fellows, Jonathan M.; Ballarini, Dario; De Giorgi, Milena; Marchetti, Francesca M.; Piccirillo, Bruno; Marrucci, Lorenzo; Bramati, Alberto; Gigli, Giuseppe; Szymańska, Marzena H.; Sanvitto, Daniele

2015-01-01

Vortices are archetypal objects that recur in the universe across the scale of complexity, from subatomic particles to galaxies and black holes. Their appearance is connected with spontaneous symmetry breaking and phase transitions. In Bose-Einstein condensates and superfluids, vortices are both point-like and quantized quasiparticles. We use a two-dimensional (2D) fluid of polaritons, bosonic particles constituted by hybrid photonic and electronic oscillations, to study quantum vortex dynamics. Polaritons benefit from easiness of wave function phase detection, a spinor nature sustaining half-integer vorticity, strong nonlinearity, and tuning of the background disorder. We can directly generate by resonant pulsed excitations a polariton condensate carrying either a full or half-integer vortex as initial condition and follow their coherent evolution using ultrafast imaging on the picosecond scale. The observations highlight a rich phenomenology, such as the spiraling of the half-vortex and the joint path of the twin charges of a full vortex, until the moment of their splitting. Furthermore, we observe the ordered branching into newly generated secondary couples, associated with the breaking of radial and azimuthal symmetries. This allows us to devise the interplay of nonlinearity and sample disorder in shaping the fluid and driving the vortex dynamics. In addition, our observations suggest that phase singularities may be seen as fundamental particles whose quantized events span from pair creation and recombination to 2D+t topological vortex strings. PMID:26665174

Influence of Poly(vinylpyrrolidone) concentration on properties of silver nanoparticles manufactured by modified thermal treatment method

PubMed Central

Saion, Elias; Gharibshahi, Elham; Shaari, Abdul Halim; Matori, Khamirul Amin

2017-01-01

Very narrow and pure silver nanoparticles were synthesized by modified thermal treatment method via oxygen and nitrogen flow in succession. The structural and optical properties of the calcined silver nanoparticles at 600°C with diverse Poly(vinylpyrrolidone) concentrations varied from 2% to 4% were studied by means of different techniques. Fourier transform infrared spectroscopy was used to monitor the production of pure Ag nanoparticles at a given Poly(vinylpyrrolidone) concentration. The X-ray powder diffraction spectra are evidence for the transformation of the amorphous sample at 30°C to the cubic crystalline nanostructures at the calcination temperatures for all Poly(vinylpyrrolidone) concentrations. The transmission electron microscopy images showed the creation of spherical silver nanoparticles with the average particle size decreased by increasing Poly(vinylpyrrolidone) concentrations from 4.61 nm at 2% to 2.49 nm at 4% Poly(vinylpyrrolidone). The optical properties were investigated by means of UV–vis absorption spectrophotometer, which showed an increase in the conduction band of Ag nanoparticles with increasing Poly(vinylpyrrolidone) concentrations from 2.83 eV at 2% Poly(vinylpyrrolidone) to 2.94 eV at 4% Poly(vinylpyrrolidone) due to decreasing particle size. This was due to less attraction between conduction electrons and metal ions for smaller particle size corresponding to fewer atoms that made up the metal nanoparticles. PMID:29045414

Multiplicity and transverse momentum evolution of charge-dependent correlations in pp, p–Pb, and Pb–Pb collisions at the LHC

DOE PAGES

Adam, J.; Adamová, D.; Aggarwal, M. M.; ...

2016-02-19

Here, we report on two-particle charge-dependent correlations in pp, p–Pb, and Pb–Pb collisions as a function of the pseudorapidity and azimuthal angle difference, Δη and Δφ respectively. These correlations are studied using the balance function that probes the charge creation time and the development of collectivity in the produced system. The dependence of the balance function on the event multiplicity as well as on the trigger and associated particle transverse momentum (p T) in pp, p–Pb, and Pb–Pb collisions at √ sNN = 7, 5.02, and 2.76 TeV, respectively, are presented. In the low transverse momentum region, for 0.2

Vortex and half-vortex dynamics in a nonlinear spinor quantum fluid.

PubMed

Dominici, Lorenzo; Dagvadorj, Galbadrakh; Fellows, Jonathan M; Ballarini, Dario; De Giorgi, Milena; Marchetti, Francesca M; Piccirillo, Bruno; Marrucci, Lorenzo; Bramati, Alberto; Gigli, Giuseppe; Szymańska, Marzena H; Sanvitto, Daniele

2015-12-01

Vortices are archetypal objects that recur in the universe across the scale of complexity, from subatomic particles to galaxies and black holes. Their appearance is connected with spontaneous symmetry breaking and phase transitions. In Bose-Einstein condensates and superfluids, vortices are both point-like and quantized quasiparticles. We use a two-dimensional (2D) fluid of polaritons, bosonic particles constituted by hybrid photonic and electronic oscillations, to study quantum vortex dynamics. Polaritons benefit from easiness of wave function phase detection, a spinor nature sustaining half-integer vorticity, strong nonlinearity, and tuning of the background disorder. We can directly generate by resonant pulsed excitations a polariton condensate carrying either a full or half-integer vortex as initial condition and follow their coherent evolution using ultrafast imaging on the picosecond scale. The observations highlight a rich phenomenology, such as the spiraling of the half-vortex and the joint path of the twin charges of a full vortex, until the moment of their splitting. Furthermore, we observe the ordered branching into newly generated secondary couples, associated with the breaking of radial and azimuthal symmetries. This allows us to devise the interplay of nonlinearity and sample disorder in shaping the fluid and driving the vortex dynamics. In addition, our observations suggest that phase singularities may be seen as fundamental particles whose quantized events span from pair creation and recombination to 2D+t topological vortex strings.

Multiplicity and transverse momentum evolution of charge-dependent correlations in pp, p-Pb, and Pb-Pb collisions at the LHC.

PubMed

Adam, J; Adamová, D; Aggarwal, M M; Aglieri Rinella, G; Agnello, M; Agrawal, N; Ahammed, Z; Ahn, S U; Aiola, S; Akindinov, A; Alam, S N; Aleksandrov, D; Alessandro, B; Alexandre, D; Alfaro Molina, R; Alici, A; Alkin, A; Almaraz, J R M; Alme, J; Alt, T; Altinpinar, S; Altsybeev, I; Alves Garcia Prado, C; Andrei, C; Andronic, A; Anguelov, V; Anielski, J; Antičić, T; Antinori, F; Antonioli, P; Aphecetche, L; Appelshäuser, H; Arcelli, S; Arnaldi, R; Arnold, O W; Arsene, I C; Arslandok, M; Audurier, B; Augustinus, A; Averbeck, R; Azmi, M D; Badalà, A; Baek, Y W; Bagnasco, S; Bailhache, R; Bala, R; Baldisseri, A; Baral, R C; Barbano, A M; Barbera, R; Barile, F; Barnaföldi, G G; Barnby, L S; Barret, V; Bartalini, P; Barth, K; Bartke, J; Bartsch, E; Basile, M; Bastid, N; Basu, S; Bathen, B; Batigne, G; Batista Camejo, A; Batyunya, B; Batzing, P C; Bearden, I G; Beck, H; Bedda, C; Behera, N K; Belikov, I; Bellini, F; Bello Martinez, H; Bellwied, R; Belmont, R; Belmont-Moreno, E; Belyaev, V; Bencedi, G; Beole, S; Berceanu, I; Bercuci, A; Berdnikov, Y; Berenyi, D; Bertens, R A; Berzano, D; Betev, L; Bhasin, A; Bhat, I R; Bhati, A K; Bhattacharjee, B; Bhom, J; Bianchi, L; Bianchi, N; Bianchin, C; Bielčík, J; Bielčíková, J; Bilandzic, A; Biswas, R; Biswas, S; Bjelogrlic, S; Blair, J T; Blau, D; Blume, C; Bock, F; Bogdanov, A; Bøggild, H; Boldizsár, L; Bombara, M; Book, J; Borel, H; Borissov, A; Borri, M; Bossú, F; Botta, E; Böttger, S; Bourjau, C; Braun-Munzinger, P; Bregant, M; Breitner, T; Broker, T A; Browning, T A; Broz, M; Brucken, E J; Bruna, E; Bruno, G E; Budnikov, D; Buesching, H; Bufalino, S; Buncic, P; Busch, O; Buthelezi, Z; Butt, J B; Buxton, J T; Caffarri, D; Cai, X; Caines, H; Calero Diaz, L; Caliva, A; Calvo Villar, E; Camerini, P; Carena, F; Carena, W; Carnesecchi, F; Castillo Castellanos, J; Castro, A J; Casula, E A R; Ceballos Sanchez, C; Cepila, J; Cerello, P; Cerkala, J; Chang, B; Chapeland, S; Chartier, M; Charvet, J L; Chattopadhyay, S; Chattopadhyay, S; Chelnokov, V; Cherney, M; Cheshkov, C; Cheynis, B; Chibante Barroso, V; Chinellato, D D; Cho, S; Chochula, P; Choi, K; Chojnacki, M; Choudhury, S; Christakoglou, P; Christensen, C H; Christiansen, P; Chujo, T; Chung, S U; Cicalo, C; Cifarelli, L; Cindolo, F; Cleymans, J; Colamaria, F; Colella, D; Collu, A; Colocci, M; Conesa Balbastre, G; Conesa Del Valle, Z; Connors, M E; Contreras, J G; Cormier, T M; Corrales Morales, Y; Cortés Maldonado, I; Cortese, P; Cosentino, M R; Costa, F; Crochet, P; Cruz Albino, R; Cuautle, E; Cunqueiro, L; Dahms, T; Dainese, A; Danu, A; Das, D; Das, I; Das, S; Dash, A; Dash, S; De, S; De Caro, A; de Cataldo, G; de Conti, C; de Cuveland, J; De Falco, A; De Gruttola, D; De Marco, N; De Pasquale, S; Deisting, A; Deloff, A; Dénes, E; Deplano, C; Dhankher, P; Di Bari, D; Di Mauro, A; Di Nezza, P; Diaz Corchero, M A; Dietel, T; Dillenseger, P; Divià, R; Djuvsland, Ø; Dobrin, A; Domenicis Gimenez, D; Dönigus, B; Dordic, O; Drozhzhova, T; Dubey, A K; Dubla, A; Ducroux, L; Dupieux, P; Ehlers, R J; Elia, D; Engel, H; Epple, E; Erazmus, B; Erdemir, I; Erhardt, F; Espagnon, B; Estienne, M; Esumi, S; Eum, J; Evans, D; Evdokimov, S; Eyyubova, G; Fabbietti, L; Fabris, D; Faivre, J; Fantoni, A; Fasel, M; Feldkamp, L; Feliciello, A; Feofilov, G; Ferencei, J; Fernández Téllez, A; Ferreiro, E G; Ferretti, A; Festanti, A; Feuillard, V J G; Figiel, J; Figueredo, M A S; Filchagin, S; Finogeev, D; Fionda, F M; Fiore, E M; Fleck, M G; Floris, M; Foertsch, S; Foka, P; Fokin, S; Fragiacomo, E; Francescon, A; Frankenfeld, U; Fuchs, U; Furget, C; Furs, A; Fusco Girard, M; Gaardhøje, J J; Gagliardi, M; Gago, A M; Gallio, M; Gangadharan, D R; Ganoti, P; Gao, C; Garabatos, C; Garcia-Solis, E; Gargiulo, C; Gasik, P; Gauger, E F; Germain, M; Gheata, A; Gheata, M; Ghosh, P; Ghosh, S K; Gianotti, P; Giubellino, P; Giubilato, P; Gladysz-Dziadus, E; Glässel, P; Goméz Coral, D M; Gomez Ramirez, A; Gonzalez, V; González-Zamora, P; Gorbunov, S; Görlich, L; Gotovac, S; Grabski, V; Grachov, O A; Graczykowski, L K; Graham, K L; Grelli, A; Grigoras, A; Grigoras, C; Grigoriev, V; Grigoryan, A; Grigoryan, S; Grinyov, B; Grion, N; Gronefeld, J M; Grosse-Oetringhaus, J F; Grossiord, J-Y; Grosso, R; Guber, F; Guernane, R; Guerzoni, B; Gulbrandsen, K; Gunji, T; Gupta, A; Gupta, R; Haake, R; Haaland, Ø; Hadjidakis, C; Haiduc, M; Hamagaki, H; Hamar, G; Harris, J W; Harton, A; Hatzifotiadou, D; Hayashi, S; Heckel, S T; Heide, M; Helstrup, H; Herghelegiu, A; Herrera Corral, G; Hess, B A; Hetland, K F; Hillemanns, H; Hippolyte, B; Hosokawa, R; Hristov, P; Huang, M; Humanic, T J; Hussain, N; Hussain, T; Hutter, D; Hwang, D S; Ilkaev, R; Inaba, M; Ippolitov, M; Irfan, M; Ivanov, M; Ivanov, V; Izucheev, V; Jacobs, P M; Jadhav, M B; Jadlovska, S; Jadlovsky, J; Jahnke, C; Jakubowska, M J; Jang, H J; Janik, M A; Jayarathna, P H S Y; Jena, C; Jena, S; Jimenez Bustamante, R T; Jones, P G; Jung, H; Jusko, A; Kalinak, P; Kalweit, A; Kamin, J; Kang, J H; Kaplin, V; Kar, S; Karasu Uysal, A; Karavichev, O; Karavicheva, T; Karayan, L; Karpechev, E; Kebschull, U; Keidel, R; Keijdener, D L D; Keil, M; Mohisin Khan, M; Khan, P; Khan, S A; Khanzadeev, A; Kharlov, Y; Kileng, B; Kim, D W; Kim, D J; Kim, D; Kim, H; Kim, J S; Kim, M; Kim, M; Kim, S; Kim, T; Kirsch, S; Kisel, I; Kiselev, S; Kisiel, A; Kiss, G; Klay, J L; Klein, C; Klein, J; Klein-Bösing, C; Klewin, S; Kluge, A; Knichel, M L; Knospe, A G; Kobayashi, T; Kobdaj, C; Kofarago, M; Kollegger, T; Kolojvari, A; Kondratiev, V; Kondratyeva, N; Kondratyuk, E; Konevskikh, A; Kopcik, M; Kour, M; Kouzinopoulos, C; Kovalenko, O; Kovalenko, V; Kowalski, M; Koyithatta Meethaleveedu, G; Králik, I; Kravčáková, A; Kretz, M; Krivda, M; Krizek, F; Kryshen, E; Krzewicki, M; Kubera, A M; Kučera, V; Kuhn, C; Kuijer, P G; Kumar, A; Kumar, J; Kumar, L; Kumar, S; Kurashvili, P; Kurepin, A; Kurepin, A B; Kuryakin, A; Kweon, M J; Kwon, Y; La Pointe, S L; La Rocca, P; Ladron de Guevara, P; Lagana Fernandes, C; Lakomov, I; Langoy, R; Lara, C; Lardeux, A; Lattuca, A; Laudi, E; Lea, R; Leardini, L; Lee, G R; Lee, S; Lehas, F; Lemmon, R C; Lenti, V; Leogrande, E; León Monzón, I; León Vargas, H; Leoncino, M; Lévai, P; Li, S; Li, X; Lien, J; Lietava, R; Lindal, S; Lindenstruth, V; Lippmann, C; Lisa, M A; Ljunggren, H M; Lodato, D F; Loenne, P I; Loginov, V; Loizides, C; Lopez, X; López Torres, E; Lowe, A; Luettig, P; Lunardon, M; Luparello, G; Maevskaya, A; Mager, M; Mahajan, S; Mahmood, S M; Maire, A; Majka, R D; Malaev, M; Maldonado Cervantes, I; Malinina, L; Mal'Kevich, D; Malzacher, P; Mamonov, A; Manko, V; Manso, F; Manzari, V; Marchisone, M; Mareš, J; Margagliotti, G V; Margotti, A; Margutti, J; Marín, A; Markert, C; Marquard, M; Martin, N A; Martin Blanco, J; Martinengo, P; Martínez, M I; Martínez García, G; Martinez Pedreira, M; Mas, A; Masciocchi, S; Masera, M; Masoni, A; Massacrier, L; Mastroserio, A; Matyja, A; Mayer, C; Mazer, J; Mazzoni, M A; Mcdonald, D; Meddi, F; Melikyan, Y; Menchaca-Rocha, A; Meninno, E; Mercado Pérez, J; Meres, M; Miake, Y; Mieskolainen, M M; Mikhaylov, K; Milano, L; Milosevic, J; Minervini, L M; Mischke, A; Mishra, A N; Miśkowiec, D; Mitra, J; Mitu, C M; Mohammadi, N; Mohanty, B; Molnar, L; Montaño Zetina, L; Montes, E; Moreira De Godoy, D A; Moreno, L A P; Moretto, S; Morreale, A; Morsch, A; Muccifora, V; Mudnic, E; Mühlheim, D; Muhuri, S; Mukherjee, M; Mulligan, J D; Munhoz, M G; Munzer, R H; Murray, S; Musa, L; Musinsky, J; Naik, B; Nair, R; Nandi, B K; Nania, R; Nappi, E; Naru, M U; Natal da Luz, H; Nattrass, C; Nayak, K; Nayak, T K; Nazarenko, S; Nedosekin, A; Nellen, L; Ng, F; Nicassio, M; Niculescu, M; Niedziela, J; Nielsen, B S; Nikolaev, S; Nikulin, S; Nikulin, V; Noferini, F; Nomokonov, P; Nooren, G; Noris, J C C; Norman, J; Nyanin, A; Nystrand, J; Oeschler, H; Oh, S; Oh, S K; Ohlson, A; Okatan, A; Okubo, T; Olah, L; Oleniacz, J; Oliveira Da Silva, A C; Oliver, M H; Onderwaater, J; Oppedisano, C; Orava, R; Ortiz Velasquez, A; Oskarsson, A; Otwinowski, J; Oyama, K; Ozdemir, M; Pachmayer, Y; Pagano, P; Paić, G; Pal, S K; Pan, J; Pandey, A K; Papcun, P; Papikyan, V; Pappalardo, G S; Pareek, P; Park, W J; Parmar, S; Passfeld, A; Paticchio, V; Patra, R N; Paul, B; Peitzmann, T; Pereira Da Costa, H; Pereira De Oliveira Filho, E; Peresunko, D; Pérez Lara, C E; Perez Lezama, E; Peskov, V; Pestov, Y; Petráček, V; Petrov, V; Petrovici, M; Petta, C; Piano, S; Pikna, M; Pillot, P; Pinazza, O; Pinsky, L; Piyarathna, D B; Płoskoń, M; Planinic, M; Pluta, J; Pochybova, S; Podesta-Lerma, P L M; Poghosyan, M G; Polichtchouk, B; Poljak, N; Poonsawat, W; Pop, A; Porteboeuf-Houssais, S; Porter, J; Pospisil, J; Prasad, S K; Preghenella, R; Prino, F; Pruneau, C A; Pshenichnov, I; Puccio, M; Puddu, G; Pujahari, P; Punin, V; Putschke, J; Qvigstad, H; Rachevski, A; Raha, S; Rajput, S; Rak, J; Rakotozafindrabe, A; Ramello, L; Rami, F; Raniwala, R; Raniwala, S; Räsänen, S S; Rascanu, B T; Rathee, D; Read, K F; Redlich, K; Reed, R J; Rehman, A; Reichelt, P; Reidt, F; Ren, X; Renfordt, R; Reolon, A R; Reshetin, A; Revol, J-P; Reygers, K; Riabov, V; Ricci, R A; Richert, T; Richter, M; Riedler, P; Riegler, W; Riggi, F; Ristea, C; Rocco, E; Rodríguez Cahuantzi, M; Rodriguez Manso, A; Røed, K; Rogochaya, E; Rohr, D; Röhrich, D; Romita, R; Ronchetti, F; Ronflette, L; Rosnet, P; Rossi, A; Roukoutakis, F; Roy, A; Roy, C; Roy, P; Rubio Montero, A J; Rui, R; Russo, R; Ryabinkin, E; Ryabov, Y; Rybicki, A; Sadovsky, S; Šafařík, K; Sahlmuller, B; Sahoo, P; Sahoo, R; Sahoo, S; Sahu, P K; Saini, J; Sakai, S; Saleh, M A; Salzwedel, J; Sambyal, S; Samsonov, V; Šándor, L; Sandoval, A; Sano, M; Sarkar, D; Scapparone, E; Scarlassara, F; Schiaua, C; Schicker, R; Schmidt, C; Schmidt, H R; Schuchmann, S; Schukraft, J; Schulc, M; Schuster, T; Schutz, Y; Schwarz, K; Schweda, K; Scioli, G; Scomparin, E; Scott, R; Šefčík, M; Seger, J E; Sekiguchi, Y; Sekihata, D; Selyuzhenkov, I; Senosi, K; Senyukov, S; Serradilla, E; Sevcenco, A; Shabanov, A; Shabetai, A; Shadura, O; Shahoyan, R; Shangaraev, A; Sharma, A; Sharma, M; Sharma, M; Sharma, N; Shigaki, K; Shtejer, K; Sibiriak, Y; Siddhanta, S; Sielewicz, K M; Siemiarczuk, T; Silvermyr, D; Silvestre, C; Simatovic, G; Simonetti, G; Singaraju, R; Singh, R; Singha, S; Singhal, V; Sinha, B C; Sinha, T; Sitar, B; Sitta, M; Skaali, T B; Slupecki, M; Smirnov, N; Snellings, R J M; Snellman, T W; Søgaard, C; Song, J; Song, M; Song, Z; Soramel, F; Sorensen, S; Sozzi, F; Spacek, M; Spiriti, E; Sputowska, I; Spyropoulou-Stassinaki, M; Stachel, J; Stan, I; Stefanek, G; Stenlund, E; Steyn, G; Stiller, J H; Stocco, D; Strmen, P; Suaide, A A P; Sugitate, T; Suire, C; Suleymanov, M; Suljic, M; Sultanov, R; Šumbera, M; Szabo, A; Szanto de Toledo, A; Szarka, I; Szczepankiewicz, A; Szymanski, M; Tabassam, U; Takahashi, J; Tambave, G J; Tanaka, N; Tangaro, M A; Tarhini, M; Tariq, M; Tarzila, M G; Tauro, A; Tejeda Muñoz, G; Telesca, A; Terasaki, K; Terrevoli, C; Teyssier, B; Thäder, J; Thomas, D; Tieulent, R; Timmins, A R; Toia, A; Trogolo, S; Trombetta, G; Trubnikov, V; Trzaska, W H; Tsuji, T; Tumkin, A; Turrisi, R; Tveter, T S; Ullaland, K; Uras, A; Usai, G L; Utrobicic, A; Vajzer, M; Vala, M; Valencia Palomo, L; Vallero, S; Van Der Maarel, J; Van Hoorne, J W; van Leeuwen, M; Vanat, T; Vande Vyvre, P; Varga, D; Vargas, A; Vargyas, M; Varma, R; Vasileiou, M; Vasiliev, A; Vauthier, A; Vechernin, V; Veen, A M; Veldhoen, M; Velure, A; Venaruzzo, M; Vercellin, E; Vergara Limón, S; Vernet, R; Verweij, M; Vickovic, L; Viesti, G; Viinikainen, J; Vilakazi, Z; Villalobos Baillie, O; Villatoro Tello, A; Vinogradov, A; Vinogradov, L; Vinogradov, Y; Virgili, T; Vislavicius, V; Viyogi, Y P; Vodopyanov, A; Völkl, M A; Voloshin, K; Voloshin, S A; Volpe, G; von Haller, B; Vorobyev, I; Vranic, D; Vrláková, J; Vulpescu, B; Vyushin, A; Wagner, B; Wagner, J; Wang, H; Wang, M; Watanabe, D; Watanabe, Y; Weber, M; Weber, S G; Weiser, D F; Wessels, J P; Westerhoff, U; Whitehead, A M; Wiechula, J; Wikne, J; Wilde, M; Wilk, G; Wilkinson, J; Williams, M C S; Windelband, B; Winn, M; Yaldo, C G; Yang, H; Yang, P; Yano, S; Yasar, C; Yin, Z; Yokoyama, H; Yoo, I-K; Yoon, J H; Yurchenko, V; Yushmanov, I; Zaborowska, A; Zaccolo, V; Zaman, A; Zampolli, C; Zanoli, H J C; Zaporozhets, S; Zardoshti, N; Zarochentsev, A; Závada, P; Zaviyalov, N; Zbroszczyk, H; Zgura, I S; Zhalov, M; Zhang, H; Zhang, X; Zhang, Y; Zhang, C; Zhang, Z; Zhao, C; Zhigareva, N; Zhou, D; Zhou, Y; Zhou, Z; Zhu, H; Zhu, J; Zichichi, A; Zimmermann, A; Zimmermann, M B; Zinovjev, G; Zyzak, M

We report on two-particle charge-dependent correlations in pp, p-Pb, and Pb-Pb collisions as a function of the pseudorapidity and azimuthal angle difference, [Formula: see text] and [Formula: see text] respectively. These correlations are studied using the balance function that probes the charge creation time and the development of collectivity in the produced system. The dependence of the balance function on the event multiplicity as well as on the trigger and associated particle transverse momentum ([Formula: see text]) in pp, p-Pb, and Pb-Pb collisions at [Formula: see text] 7, 5.02, and 2.76 TeV, respectively, are presented. In the low transverse momentum region, for [Formula: see text] GeV/ c , the balance function becomes narrower in both [Formula: see text] and [Formula: see text] directions in all three systems for events with higher multiplicity. The experimental findings favor models that either incorporate some collective behavior (e.g. AMPT) or different mechanisms that lead to effects that resemble collective behavior (e.g. PYTHIA8 with color reconnection). For higher values of transverse momenta the balance function becomes even narrower but exhibits no multiplicity dependence, indicating that the observed narrowing with increasing multiplicity at low [Formula: see text] is a feature of bulk particle production.

Holographic signatures of cosmological singularities.

PubMed

Engelhardt, Netta; Hertog, Thomas; Horowitz, Gary T

2014-09-19

To gain insight into the quantum nature of cosmological singularities, we study anisotropic Kasner solutions in gauge-gravity duality. The dual description of the bulk evolution towards the singularity involves N=4 super Yang-Mills theory on the expanding branch of deformed de Sitter space and is well defined. We compute two-point correlators of Yang-Mills operators of large dimensions using spacelike geodesics anchored on the boundary. The correlators show a strong signature of the singularity around horizon scales and decay at large boundary separation at different rates in different directions. More generally, the boundary evolution exhibits a process of particle creation similar to that in inflation. This leads us to conjecture that information on the quantum nature of cosmological singularities is encoded in long-wavelength features of the boundary wave function.

An analytical approach to the rise velocity of periodic bubble trains in non-Newtonian fluids.

PubMed

Frank, X; Li, H Z; Funfschilling, D

2005-01-01

The present study aims at providing insight into the acceleration mechanism of a bubble chain rising in shear-thinning viscoelastic fluids. The experimental investigation by the Particle Image Velocimetry (PIV), birefringence visualisation and rheological simulation shows that two aspects are central to bubble interactions in such media: the stress creation by the passage of bubbles, and their relaxation due to the fluid's memory forming an evanescent corridor of reduced viscosity. Interactions between bubbles were taken into account mainly through a linear superposition of the stress evolution behind each bubble. An analytical approach together with the rheological consideration was developed to compute the rise velocity of a bubble chain in function of the injection period and bubble volume. The model predictions compare satisfactorily with the experimental investigation.

Simulations On Pair Creation In Collision Of γ-Beams Produced With High Intensity Lasers

NASA Astrophysics Data System (ADS)

Jansen, Oliver; Ribeyre, Xavier; D'Humieres, Emmanuel; Lobet, Mathieu; Jequier, Sophie; Tikhonchuk, Vladimir

2016-10-01

Direct production of electron-positron pairs in two photon collisions, the Breit-Wheeler process, is one of the most basic processes in the universe. However, this process has never been directly observed in the laboratory due to the lack of high intensity γ sources. For a feasibility study and for the optimisation of experimental set-ups we developed a high-performance tree-code. Different possible set-ups with MeV photon sources were discussed and compared using collision detection for huge number of particles in a quantum-electrodynamic regime. The authors acknowledge the financial support from the French National Research Agency (ANR) in the framework of ''The Investments for the Future'' programme IdEx Bordeaux - LAPHIA (ANR-10IDEX-03-02)-Project TULIMA.

Rheological properties of experimental Bis-GMA/TEGDMA flowable resin composites with various macrofiller/microfiller ratio.

PubMed

Beun, Sébastien; Bailly, Christian; Dabin, Anne; Vreven, José; Devaux, Jacques; Leloup, Gaëtane

2009-02-01

The purpose of this study was to investigate the rheological behavior of resin composites and to evaluate the influence of each component, organic as well as inorganic, on their viscoelastic properties by testing model experimental formulations. Several unfilled mixtures of 2,2-bis-[4-(methacryloxy-2-hydroxy-propoxy)-phenyl]-propane (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) were prepared as well as experimental flowable resin composites using a Bis-GMA/TEGDMA 50/50 wt% mixture as organic fraction filled at 60% in weight with varying ratios of silanated barium glass (1 microm) and partially hydrophobic fumed silica (0.1 microm). Their rheological properties were investigated using dynamic oscillatory rheometers. Transmission electron microscopy (TEM) was also performed to investigate the spatial organization of the filler particles. Unfilled Bis-GMA/TEGDMA mixtures all showed a Newtonian behavior. The experimental flowable resin composites were non-Newtonian, shear-thinning fluids. As the quantity of microfiller increased, the viscosity increased and the shear-thinning behavior increased as well. In addition, the experimental composites showed thixotropy, i.e. their viscosity is a function of time after deformation. All these properties were not specifically linked to the creation and destruction of a visible network between inorganic particles, as no difference could be seen between particles' spatial organization at the equilibrium rest state or immediately after deformation. The complex viscoelastic properties of resin composites are due to interactions between microfiller and monomer molecules. Modifying the chemical and physical properties of the particles' surface could possibly improve their flow properties and thus their clinical handling performances.

Continuum Theory (CT):. Its Particle-Tied Aether Yields a Continuous Auto-creation, Non-expanding Cosmology and New Light on Galaxy Evolution and Clusters

NASA Astrophysics Data System (ADS)

Osmaston, Miles F.

2013-09-01

Our preceding paper "Implementing Maxwell's aether......." (Paper I) concluded:- (A) Maxwell's aether, ignored in Relativity, is a massless, quasi-superfluid continuum of extremely high negative charge density; (B) Fundamental particles are not infinitesimal singularities within the aether but develop their mass by being `made out of it' (hence the name Continuum Theory) as finite-sized vortical constructs of its motion. So reproduction (`auto-creation') of more of them requires only the addition of suitable dynamical energy, with Ampere's law providing charge-coupling in shear to get rotations. (C) In the resulting gravitational process, generating the Newtonian force simultaneously also generates a radial electric field, the Gravity-Electric (G-E) field, whose action on astronomical plasmas could explain the flat tangential velocity profiles of spiral galaxies without resort to Cold Dark Matter (CDM) if outward disc flow is present. One of the objectives here is to provide that flow by axial infall and to examine its consequences. But first, if particles are `made out of aether' the associated random aether-charge motion will generate radiation (the CMB) and impose four distance-cumulative, wavelength-independent transmission effects upon electromagnetic waves. One of these - a redshift - we see here as the cosmic redshift, plus intrinsic redshifts in stellar and galaxy `atmospheres'. Such a redshift appears to have been reliably observed with caesium clocks over long ground-level paths in 1968 but, lacking an appreciation of its mechanism, its wide significance was doubted. In fact, our extrapolation to intergalactic conditions dispenses with the BigBang. The other 3 transmission effects are:- spectral line broadening, scattering and attenuation, each of which has significant astronomical/cosmological expression. If the cosmic redshift is not a velocity, the reason for Dark Energy vanishes. In the resulting no-expansion cosmology the Universe was originally equipped with randomly moving aether, from whose motion and energy content the entire mass content of the Universe has grown over time by auto-creation, the local rate of which experiences positive feedback and acceleration as gravitational accumulations drive energy levels higher. Hence the clumpiness of galaxy distributions. The infall of cosmogonally young material from the auto-creation auras of clusters has 3 major implications. (1) It completely inverts the Big Bang perspective that lowmetallicity material, widespread in galaxy haloes, is very ancient. (2) Quasi-axial infall of such broadly neutral material (mostly H) onto a Spiral will spread out in the galactic plane, driven radially from the ionizing bulge by the G-E field, maintaining constant tangential velocity; all without CDM. This pattern means that the arms, although trailing, are actually being blown outward (unwrapping). See Paper I for detail. For such ongoing disruption of Spirals to prevail so widely means that originally each must have started life as an a.m.-conserving, tightly-wound spiral of mostly neutral, cosmogonically young material (mainly H), in which G-E field action was minimal until star formation and ionization had set in. (3) In cluster interiors, other cluster members may deflect the two infall streams as they converge onto a Spiral, introducing a dynamical rotational couple near the centre, with an axis roughly in the galactic plane, to produce a Barred Spiral. Cessation of infall then results in endwise collapse of that bar, yielding a fattened Elliptical. Those are indeed typically concentrated in the centres of clusters and show a dearth of active star formation, consistent with being deprived of young infall. We present images and diagrams in support and elaboration of (2) and (3). The CT model for quasars provides large intrinsic redshift by the CT analogue of Transverse Doppler Effect and offers light-element synthesis by the evolutionary precipitation of a runaway rotational shrinkage, with mass annihilation and emission of a GRB. Of special interest, relative to the arm's-length nature of BigBang cosmology, is that continuous auto-creation (CAC) cosmology is in principle available near-by for direct study and the development of strong observational constraints. In the context of (1), the very low metallicity (Pop II) of globular (star) clusters abundantly present in the haloes of galaxies points to them being (infallen?) local concentrations of quite young auto-creation. In that case the `blue straggler' stars more recently formed in their core regions may be our youngest examples of ongoing auto-creation. In summary, CT offers a much more directly observable Universe, with no Big Bang, CDM, or Dark Energy, and a CMB that records the true temperature of intergalactic space along the path taken by the radiation. Its closely cavity-radiation character arises from the random aether's transmission-related opacity (Olbers' Paradox) of the infinite CT Universe. Fundamentally, the aether's random motion constitutes all-penetrating random electromagnetic excitation at the atomic scale that may offer the accommodation between classical physics and stochastic quantum electrodynamics so long obstructed by Relativity Theory.

Considerations for the independent reaction times and step-by-step methods for radiation chemistry simulations

NASA Astrophysics Data System (ADS)

Plante, Ianik; Devroye, Luc

2017-10-01

Ionizing radiation interacts with the water molecules of the tissues mostly by ionizations and excitations, which result in the formation of the radiation track structure and the creation of radiolytic species such as H.,.OH, H2, H2O2, and e-aq. After their creation, these species diffuse and may chemically react with the neighboring species and with the molecules of the medium. Therefore radiation chemistry is of great importance in radiation biology. As the chemical species are not distributed homogeneously, the use of conventional models of homogeneous reactions cannot completely describe the reaction kinetics of the particles. Actually, many simulations of radiation chemistry are done using the Independent Reaction Time (IRT) method, which is a very fast technique to calculate radiochemical yields but which do not calculate the positions of the radiolytic species as a function of time. Step-by-step (SBS) methods, which are able to provide such information, have been used only sparsely because these are time-consuming in terms of calculation. Recent improvements in computer performance now allow the regular use of the SBS method in radiation chemistry. The SBS and IRT methods are both based on the Green's functions of the diffusion equation (GFDE). In this paper, several sampling algorithms of the GFDE and for the IRT method are presented. We show that the IRT and SBS methods are exactly equivalent for 2-particles systems for diffusion and partially diffusion-controlled reactions between non-interacting particles. We also show that the results obtained with the SBS simulation method with periodic boundary conditions are in agreement with the predictions by classical reaction kinetics theory, which is an important step towards using this method for modelling of biochemical networks and metabolic pathways involved in oxidative stress. Finally, the first simulation results obtained with the code RITRACKS (Relativistic Ion Tracks) are presented.

Dynamic localization and shear-induced hopping of particles: A way to understand the rheology of dense colloidal dispersions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Tianying; Zukoski, Charles F., E-mail: czukoski@illinois.edu

2014-09-01

For decades, attempts have been made to understand the formation of colloidal glasses and gels by linking suspension mechanics to particle properties where details of size, shape, and spatial dependencies of pair potentials present a bewildering array of variables that can be manipulated to achieve observed properties. Despite the range of variables that control suspension properties, one consistent observation is the remarkably similarity of flow properties observed as particle properties are varied. Understanding the underlying origins of the commonality in those behaviors (e.g., shear-thinning with increasing stress, diverging zero shear rate viscosity with increasing volume fraction, development of a dynamicmore » yield stress plateau with increases in volume faction or strength of attraction, development of two characteristic relaxation times probed in linear viscoelasticity, the creation of a rubbery plateau modulus at high strain frequencies, and shear-thickening) remains a challenge. Recently, naïve mode coupling and dynamic localization theories have been developed to capture collective behavior giving rise to formation of colloidal glasses and gels. This approach characterizes suspension mechanics of strongly interacting particles in terms of sluggish long-range particle diffusion modulated by varying particle interactions and volume fraction. These theories capture the scaling of the modulus with the volume fraction and strength of interparticle attraction, the frequency dependence of the moduli at the onset of the gel/glass transition, together with the divergence of the zero shear rate viscosity and cessation of diffusivity for hard sphere systems as close packing is approached. In this study, we explore the generality of the predictions of dynamic localization theory for systems of particles composed of bimodal particle size distributions experiencing weak interactions. We find that the mechanical properties of these suspensions are well captured within the framework of dynamic localization theory and that suspension mechanics can be understood in terms of a dynamical potential barrier, the magnitude of which governs the zero shear rate viscosity, and onset of a dynamic yield stress plateau as volume fraction or strength of interaction is raised.« less

Metal oxide porous ceramic membranes with small pore sizes

DOEpatents

Anderson, Marc A.; Xu, Qunyin

1992-01-01

A method is disclosed for the production of metal oxide ceramic membranes of very small pore size. The process is particularly useful in the creation of titanium and other transition metal oxide membranes. The method utilizes a sol-gel process in which the rate of particle formation is controlled by substituting a relatively large alcohol in the metal alkoxide and by limiting the available water. Stable, transparent metal oxide ceramic membranes are created having a narrow distribution of pore size, with the pore diameter being manipulable in the range of 5 to 40 Angstroms.

Metal oxide porous ceramic membranes with small pore sizes

DOEpatents

Anderson, Marc A.; Xu, Qunyin

1991-01-01

A method is disclosed for the production of metal oxide ceramic membranes of very small pore size. The process is particularly useful in the creation of titanium and other transition metal oxide membranes. The method utilizes a sol-gel process in which the rate of particle formation is controlled by substituting a relatively large alcohol in the metal alkoxide and by limiting the available water. Stable, transparent metal oxide ceramic membranes are created having a narrow distribution of pore size, with the pore diameter being manipulable in the range of 5 to 40 Angstroms.

A model of the normal and null states of pulsars

NASA Astrophysics Data System (ADS)

Jones, P. B.

1981-12-01

A solvable three-dimensional polar cap model of pair creation and charged particle acceleration has been derived. There are no free parameters of significance apart from the polar surface magnetic flux density. The parameter determining the acceleration potential difference has been obtained by calculation of elementary nuclear and electromagnetic processes. Solutions of the model exist for both normal and null states of a pulsar, and the instability in the normal state leading to the normal to null transition has been identified. The predicted necessary condition for the transition is entirely consistent with observation.

A model of the normal and null states of pulsars

NASA Astrophysics Data System (ADS)

Jones, P. B.

A solvable three dimensional polar cap model of pair creation and charged particle acceleration is derived. There are no free parameters of significance apart from the polar surface magnetic flux density. The parameter CO determining the acceleration potential difference was obtained by calculation of elementary nuclear and electromagnetic processes. Solutions of the model exist for both normal and null states of a pulsar, and the instability in the normal state leading to the normal to null transition is identified. The predicted necessary condition for the transition is entirely consistent with observation.

The Surface Layer Mechanical Condition and Residual Stress Forming Model in Surface Plastic Deformation Process with the Hardened Body Effect Consideration

NASA Astrophysics Data System (ADS)

Mahalov, M. S.; Blumenstein, V. Yu

2017-10-01

The mechanical condition and residual stresses (RS) research and computational algorithms creation in complex types of loading on the product lifecycle stages relevance is shown. The mechanical state and RS forming finite element model at surface plastic deformation strengthening machining, including technological inheritance effect, is presented. A model feature is the production previous stages obtained transformation properties consideration, as well as these properties evolution during metal particles displacement through the deformation space in the present loading step.

The Effect of Active Creation on Psychological Health: A Feasibility Study on (Therapeutic) Mechanisms

PubMed Central

Lange, Gudrun; Leonhart, Rainer; Gruber, Harald

2018-01-01

Creation is an important part of many interventions in creative arts therapies (art, music, dance, and drama therapy). This active part of art-making in arts therapies has not yet been closely investigated. The present study commits to this field of research using a mixed-methods design to investigate the effects of active creation on health-related psychological outcomes. In an artistic inquiry within an experimental design, N = 44 participants engaged in active art-making for eight minutes in the presence of the researcher (first author) with a choice of artistic materials: paper and colors for drawing and writing, musical instruments, space for moving or performing. Before and after the creation, participants completed a well-being, a self-efficacy and an experience of creation scale, and in addition found their own words to express the experiences during the activity. We hypothesized that the experience of empowerment, freedom, impact, and creativity (Experience of Creation Scale) mediates the positive effect of active creation on the outcomes of self-efficacy and well-being, and evaluated this assumption with a mediation analysis. Results suggest that the effect of active creation on both self-efficacy and well-being is significantly mediated by the Experience of Creation Scale. This article focuses on the quantitative side of the investigation. During the process, qualitative and quantitative results were triangulated for a more valid evaluation and jointly contribute to the emerging theory frame of embodied aesthetics. PMID:29439541

The Effect of Active Creation on Psychological Health: A Feasibility Study on (Therapeutic) Mechanisms.

PubMed

Lange, Gudrun; Leonhart, Rainer; Gruber, Harald; Koch, Sabine C

2018-02-12

Creation is an important part of many interventions in creative arts therapies (art, music, dance, and drama therapy). This active part of art-making in arts therapies has not yet been closely investigated. The present study commits to this field of research using a mixed-methods design to investigate the effects of active creation on health-related psychological outcomes. In an artistic inquiry within an experimental design, N = 44 participants engaged in active art-making for eight minutes in the presence of the researcher (first author) with a choice of artistic materials: paper and colors for drawing and writing, musical instruments, space for moving or performing. Before and after the creation, participants completed a well-being, a self-efficacy and an experience of creation scale, and in addition found their own words to express the experiences during the activity. We hypothesized that the experience of empowerment, freedom, impact, and creativity (Experience of Creation Scale) mediates the positive effect of active creation on the outcomes of self-efficacy and well-being, and evaluated this assumption with a mediation analysis. Results suggest that the effect of active creation on both self-efficacy and well-being is significantly mediated by the Experience of Creation Scale. This article focuses on the quantitative side of the investigation. During the process, qualitative and quantitative results were triangulated for a more valid evaluation and jointly contribute to the emerging theory frame of embodied aesthetics.

Hiding an elephant: heavy sterile neutrino with large mixing angle does not contradict cosmology

NASA Astrophysics Data System (ADS)

Bezrukov, F.; Chudaykin, A.; Gorbunov, D.

2017-06-01

We study a model of a keV-scale sterile neutrino with a relatively large mixing with the Standard Model sector. Usual considerations predict active generation of such particles in the early Universe, which leads to constraints from the total Dark Matter density and absence of X-ray signal from sterile neutrino decay. These bounds together may deem any attempt of creation of the keV scale sterile neutrino in the laboratory unfeasible. We argue that for models with a hidden sector coupled to the sterile neutrino these bounds can be evaded, opening new perspectives for the direct studies at neutrino experiments such as Troitsk ν-mass and KATRIN. We estimate the generation of sterile neutrinos in scenarios with the hidden sector dynamics keeping the sterile neutrinos either massless or superheavy in the early Universe. In both cases the generation by oscillations from active neutrinos in plasma is suppressed.

Orientational order of motile defects in active nematics

DOE PAGES

DeCamp, Stephen J.; Redner, Gabriel S.; Baskaran, Aparna; ...

2015-08-17

The study of equilibrium liquid crystals has led to fundamental insights into the nature of ordered materials, as well as many practical applications such as display technologies. Active nematics are a fundamentally different class of liquid crystals, which are driven away from equilibrium by the autonomous motion of their constituent rodlike particles. This internally-generated activity powers the continuous creation and annihilation of topological defects, leading to complex streaming flows whose chaotic dynamics appear to destroy long-range order. Here, we study these dynamics in experimental and computational realizations of active nematics. By tracking thousands of defects over centimeter distances in microtubule-basedmore » active nematics, we identify a non-equilibrium phase characterized by system-spanning orientational order of defects. This emergent order persists over hours despite defect lifetimes of only seconds. Lastly, similar dynamical structures are observed in coarse-grained simulations, suggesting that defect-ordered phases are a generic feature of active nematics.« less

Effect of microstructure on the breakage of tin bronze machining chips during pulverization via jet milling

NASA Astrophysics Data System (ADS)

Afshari, Elham; Ghambari, Mohammad; Farhangi, Hasan

2016-11-01

In this study, jet milling was used to recycle tin bronze machining chips into powder. The main purpose of this study was to assess the effect of the microstructure of tin bronze machining chips on their breakage behavior. An experimental target jet mill was used to pulverize machining chips of three different tin bronze alloys containing 7wt%, 10wt%, and 12wt% of tin. Optical and electron microscopy, as well as sieve analysis, were used to follow the trend of pulverization. Each alloy exhibited a distinct rate of size reduction, particle size distribution, and fracture surface appearance. The results showed that the degree of pulverization substantially increased with increasing tin content. This behavior was attributed to the higher number of machining cracks as well as the increased volume fraction of brittle δ phase in the alloys with higher tin contents. The δ phase was observed to strongly influence the creation of machining cracks as well as the nucleation and propagation of cracks during jet milling. In addition, a direct relationship was observed between the mean δ-phase spacing and the mean size of the jet-milled product; i.e., a decrease in the δ-phase spacing resulted in smaller particles.

Effect of traditional plants in Sri Lanka on skin fibroblast cell number.

PubMed

Sano, Katsura; Someya, Takao; Hara, Kotaro; Sagane, Yoshimasa; Watanabe, Toshihiro; Wijesekara, R G S

2018-08-01

This article describes the effects of extracts of several plants collected in Sri Lanka on the cell number of human skin fibroblasts. This study especially focuses on the plants traditionally used in indigenous systems of medicine in Sri Lanka, such as Ayurveda, as described below (English name, "local name in Sri Lanka," scientific name). Bougainvillea plant, "bouganvilla," Bougainvillea grabla (Nature׳s Beauty Creations Ltd., 2014) [1], purple fruited pea eggplant,"welthibbatu," Solanum trilobatum (Nature׳s Beauty Creations Ltd., 2014) [2], country borage plant, "kapparawalliya," Plectranthus amboinicus  (Nature׳s Beauty Creations Ltd., 2014) [3], malabar nut plant, "adhatoda," Justicia adhatoda (Nature׳s Beauty Creations Ltd., 2014) [4], long pepper plant,"thippili," Piper longum (Nature׳s Beauty Creations Ltd., 2014) [5], holy basil plant, "maduruthala," Ocimum tenuiflorum (Nature׳s Beauty Creations Ltd., 2014) [6], air plant, "akkapana," Kalanchoe pinnata (Nature׳s Beauty Creations Ltd., 2014) [7], plumed cockscomb plant, "kiri-henda," Celosia argentea (Nature׳s Beauty Creations Ltd., 2014) [8], neem plant,"kohomba," Azadirachta indica (Nature׳s Beauty Creations Ltd., 2014) [9], emblic myrobalan plant, "nelli," Phyllanthus emblica (Nature׳s Beauty Creations Ltd., 2014) [10]. Human skin fibroblast cells were treated with various concentration of plant extracts (0-3.0%), and the cell viability of cells were detected using calcein assay. The cell viabillity profiles are provided as line graphs.

Development of Ultra-High Molecular Weight Polyethylene (UHMWPE) Coating by Cold Spray Technique

NASA Astrophysics Data System (ADS)

Ravi, Kesavan; Ichikawa, Yuji; Deplancke, Tiana; Ogawa, Kazuhiro; Lame, Olivier; Cavaille, Jean-Yves

2015-08-01

Ultra-high molecular weight polyethylene or UHMWPE is an extremely difficult material to coat with, as it is rubbery and chemically very inert. The Cold Spray process appears to be a promising alternative processing technique but polymers are in general difficult to deposit using this method. So, attempts to develop UHMWPE coatings were made using a downstream injection cold spray technique incorporating a few modifications. A conventional cold spray machine yielded only a few deposited particles of UHMWPE on the substrate surface, but with some modifications in the nozzle geometry (especially the length and inner geometry) a thin coating of 45 μm on Al substrate was obtained. Moreover, experiments with the addition of fumed nano-alumina to the feedstock yielded a coating of 1-4 mm thickness on Al and polypropylene substrates. UHMWPE was seen to be melt crystallized during the coating formation, as can be seen from the differential calorimetry curves. Influence of nano-ceramic particles was explained by observing the creation of a bridge bond between UHMWPE particles.

Proponents of Creationism but not Proponents of Evolution Frame the Origins Debate in Terms of Proof

NASA Astrophysics Data System (ADS)

Barnes, Ralph M.; Church, Rebecca A.

2013-03-01

In Study 1, 72 internet documents containing creationism, ID (intelligent design), or evolution content were selected for analysis. All instances of proof cognates (the word "proof" and related terms such as "proven", "disproof", etc.) contained within these documents were identified and labeled in terms of the manner in which the terms were used. In Study 2, frequency counts for six terms (proof, evidence, establish, experiment, test, trial) were conducted on a sample of peer-reviewed research articles in the journal Science and the 72 internet documents included in Study 1. Quantitative and qualitative analyses revealed that proponents of creationism were much more likely than proponents of evolution to frame the creationism/evolution issue in terms of proof (ID proponents fell partway between the other two). Proponents of creationism frequently described empirical data favoring their position as proof of their position. Even more frequently, proponents of creationism described evolutionary scientists as being engaged in failed attempts to prove the truth of the evolutionary position. Evolution documents included fewer proof cognates than creationism or ID documents and the few proof cognates found in evolution documents were rarely used to describe the status of the theory of evolution. Qualitative data analysis indicated that proof cognates were often used to indicate certainty. The asymmetry between evolution and creationism documents was limited primarily to proof cognates; there were no major asymmetries for the terms evidence, establish, experiment, test, and trial. The results may reveal differences in the epistemological commitments of the involved parties.

Acoustic Microfluidics for Bioanalytical Application

NASA Astrophysics Data System (ADS)

Lopez, Gabriel

2013-03-01

This talk will present new methods the use of ultrasonic standing waves in microfluidic systems to manipulate microparticles for the purpose of bioassays and bioseparations. We have recently developed multi-node acoustic focusing flow cells that can position particles into many parallel flow streams and have demonstrated the potential of such flow cells in the development of high throughput, parallel flow cytometers. These experiments show the potential for the creation of high throughput flow cytometers in applications requiring high flow rates and rapid detection of rare cells. This talk will also present the development of elastomeric capture microparticles and their use in acoustophoretic separations. We have developed simple methods to form elastomeric particles that are surface functionalized with biomolecular recognition reagents. These compressible particles exhibit negative acoustic contrast in ultrasound when suspended in aqueous media, blood serum or diluted blood. These particles can be continuously separated from cells by flowing them through a microfluidic device that uses an ultrasonic standing wave to align the blood cells, which exhibit positive acoustic contrast, at a node in the acoustic pressure distribution while aligning the negative acoustic contrast elastomeric particles at the antinodes. Laminar flow of the separated particles to downstream collection ports allows for collection of the separated negative contrast particles and cells. Separated elastomeric particles were analyzed via flow cytometry to demonstrate nanomolar detection for prostate specific antigen in aqueous buffer and picomolar detection for IgG in plasma and diluted blood samples. This approach has potential applications in the development of rapid assays that detect the presence of low concentrations of biomarkers (including biomolecules and cells) in a number of biological sample types. We acknowledge support through the NSF Research Triangle MRSEC.

Insulin Particle Formation in Supersaturated Aqueous Solutions of Poly(Ethylene Glycol)

PubMed Central

Bromberg, Lev; Rashba-Step, Julia; Scott, Terrence

2005-01-01

Protein microspheres are of particular utility in the field of drug delivery. A novel, completely aqueous, process of microsphere fabrication has been devised based on controlled phase separation of protein from water-soluble polymers such as polyethylene glycols. The fabrication process results in the formation of spherical microparticles with narrow particle size distributions. Cooling of preheated human insulin-poly(ethylene glycol)-water solutions results in the facile formation of insulin particles. To map out the supersaturation conditions conducive to particle nucleation and growth, we determined the temperature- and concentration-dependent boundaries of an equilibrium liquid-solid phase separation. The kinetics of formation of microspheres were followed by dynamic and continuous-angle static light scattering techniques. The presence of PEG at a pH that was close to the protein's isoelectric point resulted in rapid nucleation and growth. The time elapsed from the moment of creation of a supersaturated solution and the detection of a solid phase in the system (the induction period, tind) ranged from tens to several hundreds of seconds. The dependence of tind on supersaturation could be described within the framework of classical nucleation theory, with the time needed for the formation of a critical nucleus (size <10 nm) being much longer than the time of the onset of particle growth. The growth was limited by cluster diffusion kinetics. The interfacial energies of the insulin particles were determined to be 3.2–3.4 and 2.2 mJ/m2 at equilibrium temperatures of 25 and 37°C, respectively. The insulin particles formed as a result of the process were monodisperse and uniformly spherical, in clear distinction to previously reported processes of microcrystalline insulin particle formation. PMID:16254391

Managing Research Output for Knowledge Creation in South-South Nigerian Universities

ERIC Educational Resources Information Center

Akuegwu, B. A.; Edet, A. O.; Uchendu, C. C.

2012-01-01

This ex-post facto designed study investigated the extent of Deans and Heads of Departments' effectiveness in managing research output for knowledge creation in South-South Nigerian universities. One research question and one hypothesis were drawn along the four dimensions of knowledge creation namely: socialization, combination, externalization…

Knowledge Creation in Construction Organisations: A Case Approach

ERIC Educational Resources Information Center

Eliufoo, Harriet

2008-01-01

Purpose: The purpose of this paper is to investigate and characterise the knowledge creation process in construction organisations and explore to what extent organisations facilitate the process. Design/methodology/approach: A case study approach is adopted using four construction organisations; a knowledge creation model is also used as the…

Distinguishing Knowledge-Sharing, Knowledge-Construction, and Knowledge-Creation Discourses

ERIC Educational Resources Information Center

van Aalst, Jan

2009-01-01

The study reported here sought to obtain the clear articulation of asynchronous computer-mediated discourse needed for Carl Bereiter and Marlene Scardamalia's knowledge-creation model. Distinctions were set up between three modes of discourse: knowledge sharing, knowledge construction, and knowledge creation. These were applied to the asynchronous…

Relationships between Organizational Trust, Knowledge Transfer, Knowledge Creation, and Firm's Innovativeness

ERIC Educational Resources Information Center

Sankowska, Anna

2013-01-01

Purpose: This study seeks to provide empirical evidence of relationships between organizational trust, knowledge transfer, creation and innovativeness at the firm level. It aims to hypothesize a mediational model implying that organizational trust is related to knowledge transfer, which will, in turn, enhance knowledge creation, thereby…

Ultrafast visualization of the structural evolution of dense hydrogen towards warm dense matter

NASA Astrophysics Data System (ADS)

Fletcher, Luke

2016-10-01

Hot dense hydrogen far from equilibrium is ubiquitous in nature occurring during some of the most violent and least understood events in our universe such as during star formation, supernova explosions, and the creation of cosmic rays. It is also a state of matter important for applications in inertial confinement fusion research and in laser particle acceleration. Rapid progress occurred in recent years characterizing the high-pressure structural properties of dense hydrogen under static or dynamic compression. Here, we show that spectrally and angularly resolved x-ray scattering measure the thermodynamic properties of dense hydrogen and resolve the ultrafast evolution and relaxation towards thermodynamic equilibrium. These studies apply ultra-bright x-ray pulses from the Linac Coherent Light (LCLS) source. The interaction of rapidly heated cryogenic hydrogen with a high-peak power optical laser is visualized with intense LCLS x-ray pulses in a high-repetition rate pump-probe setting. We demonstrate that electron-ion coupling is affected by the small number of particles in the Debye screening cloud resulting in much slower ion temperature equilibration than predicted by standard theory. This work was supported by the DOE Office of Science, Fusion Energy Science under FWP 100182.

New geometric and field theoretic aspects of a radiation dominated universe

NASA Astrophysics Data System (ADS)

Modak, Sujoy K.

2018-05-01

The homogeneous and isotropic radiation dominated universe, following the inflationary stage, is expressed as a spherically symmetric and inhomogeneous spacetime upon a power-law-type conformal transformation of the null (cosmological) coordinates. This new spacetime metric has many interesting properties. While the static observers, at a fixed position in this new spacetime, do not see any horizon, some nonstatic observers encounter a horizon due to their motion which is analogous to the situation of Rindler observers in Minkowski spacetime. The symmetry of the new metric offers a unitarily inequivalent quantization of the massless scalar field and provides a new example of particle creation. We calculate the particle content of the cosmological vacuum state with respect to the static observer in this new spacetime who, with respect to cosmological time, is freely falling in the asymptotic past and future but accelerated in between.

Isometry group orbit quantization of spinning strings in AdS3 × S3

NASA Astrophysics Data System (ADS)

Heinze, Martin; Jorjadze, George; Megrelidze, Luka

2015-03-01

Describing the bosonic AdS3 × S3 particle and string in SU(1,1) × SU(2) group variables, we provide a Hamiltonian treatment of the isometry group orbits of solutions via analysis of the pre-symplectic form. For the particle we obtain a one-parameter family of orbits parameterized by creation-annihilation variables, which leads to the Holstein-Primakoff realization of the isometry group generators. The scheme is then applied to spinning string solutions characterized by one winding number in AdS3 and two winding numbers in S3. We find a two-parameter family of orbits, where quantization again provides the Holstein-Primakoff realization of the symmetry generators with an oscillator-type energy spectrum. Analyzing the minimal energy at strong coupling, we verify the spectrum of short strings at special values of winding numbers.

Pharmaceutical spray drying: solid-dose process technology platform for the 21st century.

PubMed

Snyder, Herman E

2012-07-01

Requirement for precise control of solid-dosage particle properties created with a scalable process technology are continuing to expand in the pharmaceutical industry. Alternate methods of drug delivery, limited active drug substance solubility and the need to improve drug product stability under room-temperature conditions are some of the pharmaceutical applications that can benefit from spray-drying technology. Used widely for decades in other industries with production rates up to several tons per hour, pharmaceutical uses for spray drying are expanding beyond excipient production and solvent removal from crystalline material. Creation of active pharmaceutical-ingredient particles with combinations of unique target properties are now more common. This review of spray-drying technology fundamentals provides a brief perspective on the internal process 'mechanics', which combine with both the liquid and solid properties of a formulation to enable high-throughput, continuous manufacturing of precision powder properties.

Creation of heterogeneous materials on the basis of B4C and Ni powders by the method of cold spraying with subsequent layer-by-layer laser treatment

NASA Astrophysics Data System (ADS)

Fomin, V. M.; Golyshev, A. A.; Kosarev, V. F.; Malikov, A. G.; Orishich, A. M.; Ryashin, N. S.; Filippov, A. A.; Shikalov, V. S.

2017-09-01

A method is proposed for creating principally new functionally graded heterogeneous materials on the basis of B4C ceramic powders with different mass fractions in the original mixture and plastic metallic additive of Ni by a combined method of cold spraying with subsequent layer-by-layer laser treatment. Mechanical properties of the resultant tracks are examined. It is shown that the track microhardness increases with increasing B4C concentration in the original mixture. The track structure is found to depend on the size of ceramic particles in the interval from 3 to 75 μm. Reduction of the B4C particle size (approximately by a factor of 2-3) inside the track owing to fragmentation under the action of the laser beam is observed for the first time.

Ocean sequestration of carbon dioxide: modeling the deep ocean release of a dense emulsion of liquid Co2-in-water stabilized by pulverized limestone particles.

PubMed

Golomb, D; Pennell, S; Ryan, D; Barry, E; Swett, P

2007-07-01

The release into the deep ocean of an emulsion of liquid carbon dioxide-in-seawater stabilized by fine particles of pulverized limestone (CaCO3) is modeled. The emulsion is denser than seawater, hence, it will sink deeper from the injection point, increasing the sequestration period. Also, the presence of CaCO3 will partially buffer the carbonic acid that results when the emulsion eventually disintegrates. The distance that the plume sinks depends on the density stratification of the ocean, the amount of the released emulsion, and the entrainment factor. When released into the open ocean, a plume containing the CO2 output of a 1000 MW(el) coal-fired power plant will typically sink hundreds of meters below the injection point. When released from a pipe into a valley on the continental shelf, the plume will sink about twice as far because of the limited entrainment of ambient seawater when the plume flows along the valley. A practical system is described involving a static mixer for the in situ creation of the CO2/seawater/pulverized limestone emulsion. The creation of the emulsion requires significant amounts of pulverized limestone, on the order of 0.5 tons per ton of liquid CO2. That increases the cost of ocean sequestration by about $13/ ton of CO2 sequestered. However, the additional cost may be compensated by the savings in transportation costs to greater depth, and because the release of an emulsion will not acidify the seawater around the release point.

Anisotropic non-gaussianity from rotational symmetry breaking excited initial states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashoorioon, Amjad; Casadio, Roberto; Dipartimento di Fisica e Astronomia, Alma Mater Università di Bologna,via Irnerio 46, 40126 Bologna

2016-12-01

If the initial quantum state of the primordial perturbations broke rotational invariance, that would be seen as a statistical anisotropy in the angular correlations of the cosmic microwave background radiation (CMBR) temperature fluctuations. This can be described by a general parameterisation of the initial conditions that takes into account the possible direction-dependence of both the amplitude and the phase of particle creation during inflation. The leading effect in the CMBR two-point function is typically a quadrupole modulation, whose coefficient is analytically constrained here to be |B|≲0.06. The CMBR three-point function then acquires enhanced non-gaussianity, especially for the local configurations. Inmore » the large occupation number limit, a distinctive prediction is a modulation of the non-gaussianity around a mean value depending on the angle that short and long wavelength modes make with the preferred direction. The maximal variations with respect to the mean value occur for the configurations which are coplanar with the preferred direction and the amplitude of the non-gaussianity increases (decreases) for the short wavelength modes aligned with (perpendicular to) the preferred direction. For a high scale model of inflation with maximally pumped up isotropic occupation and ϵ≃0.01 the difference between these two configurations is about 0.27, which could be detectable in the future. For purely anisotropic particle creation, the non-Gaussianity can be larger and its anisotropic feature very sharp. The non-gaussianity can then reach f{sub NL}∼30 in the preferred direction while disappearing from the correlations in the orthogonal plane.« less

The study of the relationship between value creation and customer loyalty with the role of trust moderation and customer satisfaction in Sari hospitals

PubMed Central

Rahmani, Zienolabedin; Ranjbar, Mansour; Gara, Ali Asgar Nadi; gorji, Mohammad Ali Heidari

2017-01-01

Background Healthcare providers are competitive, owing to heightened customers’ awareness and expectations of health care services. Objective The aim of this study was to determine the relationship between customer value creation and loyalty with mediator trust and customer satisfaction. Methods This is a cross sectional survey study. Participants were 196 patients referred to private hospitals in Sari city, Iran from May to June 2014 which were selected by convenience sampling method. Data were collected using questionnaires. Data were analyzed using the structural equation modeling software Smart PLS. Results The results revealed a relationship between customer value creation and customer loyalty in a Sari city private hospital, and customer satisfaction and trust, mediate the relationship between customer value creation and customer loyalty. The results also revealed significant positive relationship between customer satisfaction and trust (p=0.000 r=0.585). Conclusion customer satisfaction and trust mediate the relationship between customer value creation and customer loyalty. PMID:28848619

The study of the relationship between value creation and customer loyalty with the role of trust moderation and customer satisfaction in Sari hospitals.

PubMed

Rahmani, Zienolabedin; Ranjbar, Mansour; Gara, Ali Asgar Nadi; Gorji, Mohammad Ali Heidari

2017-06-01

Healthcare providers are competitive, owing to heightened customers' awareness and expectations of health care services. The aim of this study was to determine the relationship between customer value creation and loyalty with mediator trust and customer satisfaction. This is a cross sectional survey study. Participants were 196 patients referred to private hospitals in Sari city, Iran from May to June 2014 which were selected by convenience sampling method. Data were collected using questionnaires. Data were analyzed using the structural equation modeling software Smart PLS. The results revealed a relationship between customer value creation and customer loyalty in a Sari city private hospital, and customer satisfaction and trust, mediate the relationship between customer value creation and customer loyalty. The results also revealed significant positive relationship between customer satisfaction and trust (p=0.000 r=0.585). customer satisfaction and trust mediate the relationship between customer value creation and customer loyalty.

Density Driven Removal of Sediment from a Buoyant Muddy Plume

NASA Astrophysics Data System (ADS)

Rouhnia, M.; Strom, K.

2014-12-01

Experiments were conducted to study the effect of settling driven instabilities on sediment removal from hypopycnal plumes. Traditional approaches scale removal rates with particle settling velocity however, it has been suggested that the removal from buoyant suspensions happens at higher rates. The enhancement of removal is likely due to gravitational instabilities, such as fingering, at two-fluid interface. Previous studies have all sought to suppress flocculation, and no simple model exists to predict the removal rates under the effect of such instabilities. This study examines whether or not flocculation hampers instability formation and presents a simple removal rate model accounting for gravitational instabilities. A buoyant suspension of flocculated Kaolinite overlying a base of clear saltwater was investigated in a laboratory tank. Concentration was continuously measured in both layers with a pair of OBS sensors, and interface was monitored with digital cameras. Snapshots from the video were used to measure finger velocity. Samples of flocculated particles at the interface were extracted to retrieve floc size data using a floc camera. Flocculation did not stop creation of settling-driven fingers. A simple cylinder-based force balance model was capable of predicting finger velocity. Analogy of fingering process of fine grained suspensions to thermal plume formation and the concept of Grashof number enabled us to model finger spacing as a function of initial concentration. Finally, from geometry, the effective cross-sectional area was correlated to finger spacing. Reformulating the outward flux expression was done by substitution of finger velocity, rather than particle settling velocity, and finger area instead of total area. A box model along with the proposed outward flux was used to predict the SSC in buoyant layer. The model quantifies removal flux based on the initial SSC and is in good agreement with the experimental data.

Structural phase composition and effectiveness of gas-dynamic spraying of hybrid coatings based on AlMg2 nanocrystalline matrix reinforced with graphene-like structures and micro-size corundum

NASA Astrophysics Data System (ADS)

Aborkin, A. V.; Sobol'kov, A. V.; Elkin, A. I.; Arkhipov, V. E.

2018-01-01

The method of cold gas-dynamic spraying of mechanically synthesized powders based on a nanocrystalline AlMg2 matrix reinforced with graphene-like structures and micro-sized corundum particles was used for obtaining hybrid coatings. A feature of the formed coatings is the presence of a two-level micro- and nanocomposite structure. It was found that an increase in the content of corundum microdimensional particles in the mixture from 10 to 30% by weight contributes to an increase in the thickness of the coating obtained at the same time by a factor of 2 from 140 to 310 μm. Further increase in the content of a mixture of micron-sized corundum particles to 50% by weight leads to a decrease in the thickness of the coating formed to 40 μm. The resulting coatings correspond to a high microhardness, varying depending on the composition in the range from 1.7 GPa to 3.2 GPa. The high hardness of the coatings is due to the increase in the hardness of the matrix material due to the creation of a nanocomposite structure, which increases the strength of fixing micro-sized corundum particles therein, improving the characteristics of the heterogeneous coating as a whole.

The Co-Creation-Wheel: A Four-Dimensional Model of Collaborative Interorganistional Innovation

ERIC Educational Resources Information Center

Ehlen, Corry; van der Klink, Marcel; Stoffers, Jol; Boshuizen, Henny

2017-01-01

Purpose: This study aims to design and validate a conceptual and practical model of co-creation. Co-creation, to design collaborative new products, services and processes in contact with users, has become more and more important because organisations increasingly require multidisciplinary collaboration inside and outside the organisation to…

An Efficacious Measurement of Learning Initiatives: E-Learning Systems, Learning-Organization Culture, Knowledge Creation, and Innovativeness

ERIC Educational Resources Information Center

Grundhoefer, Raymie

2013-01-01

The purpose of this research is twofold: (a) develop a validated measure for learning initiatives based on knowledge-creation theory and (b) conduct a quantitative study to investigate the relationships between electronic learning systems, learning-organization culture, efficacious knowledge creation (EKC), and innovativeness. Although Cheng-Chang…

Assessing Large-Scale Public Job Creation. R&D Monograph 67.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC.

To assess the feasibility of large-scale, countercyclical public job creation, a study was initiated. Job creation program activities were examined in terms of how many activities could be undertaken; what would be their costs; and what would be their characteristics (labor-intensity, skill-mix, and political acceptability) that might contribute…

[A study of laparoscopic stoma creation for patients with malignant bowel obstruction].

PubMed

Nakata, Ken; Fukunaga, Mutsumi; Ebihara, Takeshi; Kato, Fumitaka; Amano, Kouji; Babaya, Akihito; Matsushita, Ako; Furukawa, Haruna; Matsushima, Yuko; Matsumoto, Hironori; Fujihara, Shinichi; Kawabata, Ryohei; Usui, Akihiro; Yamamoto, Tameyoshi; Oda, Kazuyuki; Kawase, Tomono; Kimura, Yutaka; Nakata, Yasuki; Ohzato, Hiroki

2013-11-01

We evaluated the efficacy of laparoscopic palliative stoma creation for patients with malignant bowel obstruction (MBO). Twenty-four patients with MBO who underwent laparoscopic stoma creation between January 2009 and December 2012 were studied and their clinical outcome was evaluated retrospectively. Compared to the open approach, the laparoscopic approach led to significantly shorter operation times and a significantly lower incidence of surgical site infection( SSI). The rate of removal of the intestinal tube and intravenous drip after surgery was 100% and 88%, respectively, and the rate of oral intake was 100% after palliative stoma creation. The prognosis was 58% in 3 months and 29% in 1 year, and the median survival time was approximately 4 months. The quality of surgery by the laparoscopic approach was better than that by the open approach, and the quality of life( QOL) after stoma creation was better than that before surgery. Given the shorter operation time, lower incidence of SSI, and better QOL, laparoscopic stoma creation is a beneficial choice for palliative treatment in patients with MBO.

Achieving Research Impact Through Co‐creation in Community‐Based Health Services: Literature Review and Case Study

PubMed Central

JACKSON, CLAIRE; SHAW, SARA; JANAMIAN, TINA

2016-01-01

Policy Points: Co‐creation—collaborative knowledge generation by academics working alongside other stakeholders—is an increasingly popular approach to aligning research and service development.It has potential for “moving beyond the ivory towers” to deliver significant societal impact via dynamic, locally adaptive community‐academic partnerships.Principles of successful co‐creation include a systems perspective, a creative approach to research focused on improving human experience, and careful attention to governance and process.If these principles are not followed, co‐creation efforts may fail. Context Co‐creation—collaborative knowledge generation by academics working alongside other stakeholders—reflects a “Mode 2” relationship (knowledge production rather than knowledge translation) between universities and society. Co‐creation is widely believed to increase research impact. Methods We undertook a narrative review of different models of co‐creation relevant to community‐based health services. We contrasted their diverse disciplinary roots and highlighted their common philosophical assumptions, principles of success, and explanations for failures. We applied these to an empirical case study of a community‐based research‐service partnership led by the Centre of Research Excellence in Quality and Safety in Integrated Primary‐Secondary Care at the University of Queensland, Australia. Findings Co‐creation emerged independently in several fields, including business studies (“value co‐creation”), design science (“experience‐based co‐design”), computer science (“technology co‐design”), and community development (“participatory research”). These diverse models share some common features, which were also evident in the case study. Key success principles included (1) a systems perspective (assuming emergence, local adaptation, and nonlinearity); (2) the framing of research as a creative enterprise with human experience at its core; and (3) an emphasis on process (the framing of the program, the nature of relationships, and governance and facilitation arrangements, especially the style of leadership and how conflict is managed). In both the literature review and the case study, co‐creation “failures” could often be tracked back to abandoning (or never adopting) these principles. All co‐creation models made strong claims for significant and sustainable societal impacts as a result of the adaptive and developmental research process; these were illustrated in the case study. Conclusions Co‐creation models have high potential for societal impact but depend critically on key success principles. To capture the nonlinear chains of causation in the co‐creation pathway, impact metrics must reflect the dynamic nature and complex interdependencies of health research systems and address processes as well as outcomes. PMID:27265562

'Ethos' Enabling Organisational Knowledge Creation

NASA Astrophysics Data System (ADS)

Matsudaira, Yoshito

This paper examines knowledge creation in relation to improvements on the production line in the manufacturing department of Nissan Motor Company and aims to clarify embodied knowledge observed in the actions of organisational members who enable knowledge creation will be clarified. For that purpose, this study adopts an approach that adds a first, second, and third-person's viewpoint to the theory of knowledge creation. Embodied knowledge, observed in the actions of organisational members who enable knowledge creation, is the continued practice of 'ethos' (in Greek) founded in Nissan Production Way as an ethical basis. Ethos is knowledge (intangible) assets for knowledge creating companies. Substantiated analysis classifies ethos into three categories: the individual, team and organisation. This indicates the precise actions of the organisational members in each category during the knowledge creation process. This research will be successful in its role of showing the indispensability of ethos - the new concept of knowledge assets, which enables knowledge creation -for future knowledge-based management in the knowledge society.

PODIO: An Event-Data-Model Toolkit for High Energy Physics Experiments

NASA Astrophysics Data System (ADS)

Gaede, F.; Hegner, B.; Mato, P.

2017-10-01

PODIO is a C++ library that supports the automatic creation of event data models (EDMs) and efficient I/O code for HEP experiments. It is developed as a new EDM Toolkit for future particle physics experiments in the context of the AIDA2020 EU programme. Experience from LHC and the linear collider community shows that existing solutions partly suffer from overly complex data models with deep object-hierarchies or unfavorable I/O performance. The PODIO project was created in order to address these problems. PODIO is based on the idea of employing plain-old-data (POD) data structures wherever possible, while avoiding deep object-hierarchies and virtual inheritance. At the same time it provides the necessary high-level interface towards the developer physicist, such as the support for inter-object relations and automatic memory-management, as well as a Python interface. To simplify the creation of efficient data models PODIO employs code generation from a simple yaml-based markup language. In addition, it was developed with concurrency in mind in order to support the use of modern CPU features, for example giving basic support for vectorization techniques.

Creation of a strongly dipolar gas of ultracold ground-state 23 Na87 Rb molecules

NASA Astrophysics Data System (ADS)

Guo, Mingyang; Zhu, Bing; Lu, Bo; Ye, Xin; Wang, Fudong; Wang, Dajun; Vexiau, Romain; Bouloufa-Maafa, Nadia; Quéméner, Goulven; Dulieu, Olivier

2016-05-01

We report on successful creation of an ultracold sample of ground-state 23 Na87 Rb molecules with a large effective electric dipole moment. Through a carefully designed two-photon Raman process, we have successfully transferred the magneto-associated Feshbach molecules to the singlet ground state with high efficiency, obtaining up to 8000 23 Na87 Rb molecules with peak number density over 1011 cm-3 in their absolute ground-state level. With an external electric field, we have induced an effective dipole moment over 1 Debye, making 23 Na87 Rb the most dipolar ultracold particle ever achieved. Contrary to the expectation, we observed a rather fast population loss even for 23 Na87 Rb in the absolute ground state with the bi-molecular exchange reaction energetically forbidden. The origin for the short lifetime and possible ways of mitigating it are currently under investigation. Our achievements pave the way toward investigation of ultracold bosonic molecules with strong dipolar interactions. This work is supported by the Hong Kong RGC CUHK404712 and the ANR/RGC Joint Research Scheme ACUHK403/13.

Nanosized zeolites as a perspective material for conductometric biosensors creation

NASA Astrophysics Data System (ADS)

Kucherenko, Ivan; Soldatkin, Oleksandr; Kasap, Berna Ozansoy; Kirdeciler, Salih Kaan; Kurc, Burcu Akata; Jaffrezic-Renault, Nicole; Soldatkin, Alexei; Lagarde, Florence; Dzyadevych, Sergei

2015-05-01

In this work, the method of enzyme adsorption on different zeolites and mesoporous silica spheres (MSS) was investigated for the creation of conductometric biosensors. The conductometric transducers consisted of gold interdigitated electrodes were placed on the ceramic support. The transducers were modified with zeolites and MSS, and then the enzymes were adsorbed on the transducer surface. Different methods of zeolite attachment to the transducer surface were used; drop coating with heating to 200°C turned out to be the best one. Nanozeolites beta and L, zeolite L, MSS, and silicalite-1 (80 to 450 nm) were tested as the adsorbents for enzyme urease. The biosensors with all tested particles except zeolite L had good analytical characteristics. Silicalite-1 (450 nm) was also used for adsorption of glucose oxidase, acetylcholinesterase, and butyrylcholinesterase. The glucose and acetylcholine biosensors were successfully created, whereas butyrylcholinesterase was not adsorbed on silicalite-1. The enzyme adsorption on zeolites and MSS is simple, quick, well reproducible, does not require use of toxic compounds, and therefore can be recommended for the development of biosensors when these advantages are especially important.

Relativistically strong electromagnetic radiation in a plasma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bulanov, S. V., E-mail: svbulanov@gmail.com, E-mail: bulanov.sergei@jaea.go.jp; Esirkepov, T. Zh.; Kando, M.

Physical processes in a plasma under the action of relativistically strong electromagnetic waves generated by high-power lasers have been briefly reviewed. These processes are of interest in view of the development of new methods for acceleration of charged particles, creation of sources of bright hard electromagnetic radiation, and investigation of macroscopic quantum-electrodynamical processes. Attention is focused on nonlinear waves in a laser plasma for the creation of compact electron accelerators. The acceleration of plasma bunches by the radiation pressure of light is the most efficient regime of ion acceleration. Coherent hard electromagnetic radiation in the relativistic plasma is generated inmore » the form of higher harmonics and/or electromagnetic pulses, which are compressed and intensified after reflection from relativistic mirrors created by nonlinear waves. In the limit of extremely strong electromagnetic waves, radiation friction, which accompanies the conversion of radiation from the optical range to the gamma range, fundamentally changes the behavior of the plasma. This process is accompanied by the production of electron–positron pairs, which is described within quantum electrodynamics theory.« less

Liquid argon TPC signal formation, signal processing and reconstruction techniques

NASA Astrophysics Data System (ADS)

Baller, B.

2017-07-01

This document describes a reconstruction chain that was developed for the ArgoNeuT and MicroBooNE experiments at Fermilab. These experiments study accelerator neutrino interactions that occur in a Liquid Argon Time Projection Chamber. Reconstructing the properties of particles produced in these interactions benefits from the knowledge of the micro-physics processes that affect the creation and transport of ionization electrons to the readout system. A wire signal deconvolution technique was developed to convert wire signals to a standard form for hit reconstruction, to remove artifacts in the electronics chain and to remove coherent noise. A unique clustering algorithm reconstructs line-like trajectories and vertices in two dimensions which are then matched to create of 3D objects. These techniques and algorithms are available to all experiments that use the LArSoft suite of software.

Inner magnetosphere variations after solar proton events. Observations on Mir space station in 1989-1994 time period.

PubMed

Dachev TsP; Semkova, J V; Matviichuk YuN; Tomov, B T; Koleva, R T; Baynov, P T; Petrov, V M; Shurshakov, V V; Ivanov, Y u

1998-01-01

Measurements on board the Mir space station have been used to study the dose rate and the particle flux distribution in the inner magnetosphere. The measurements have been performed with the Bulgarian-Russian dosimeter-radiometer Liulin. The paper concentrates on the dynamics of the observed "new" and "second" maxima which were created after Solar Proton Events (SPE) in the 1989-1994 time. The "second" belt was first observed after the SPE on October 20, 1989, and the last observation was after the SPE on February 20, 1994. The creation of the "new" belt is a unique phenomena seen in the Liulin data set after the SPE on March 23, 1991 and relates to the magnetic storm on March 24. The new belt fully disappears in the middle of 1993.

Knowledge Value Creation Characteristics of Virtual Teams: A Case Study in the Construction Sector

NASA Astrophysics Data System (ADS)

Vorakulpipat, Chalee; Rezgui, Yacine

Any knowledge environment aimed at virtual teams should promote identification, access, capture and retrieval of relevant knowledge anytime / anywhere, while nurturing the social activities that underpin the knowledge sharing and creation process. In fact, socio-cultural issues play a critical role in the successful implementation of Knowledge Management (KM), and constitute a milestone towards value creation. The findings indicate that Knowledge Management Systems (KMS) promote value creation when they embed and nurture the social conditions that bind and bond team members together. Furthermore, technology assets, human networks, social capital, intellectual capital, and change management are identified as essential ingredients that have the potential to ensure effective knowledge value creation.

Unexpected Toxicity of Monolayer Protected Gold Clusters Eliminated by PEG-Thiol Place Exchange Reactions

PubMed Central

Simpson, Carrie A.; Huffman, Brian J.; Gerdon, Aren E.; Cliffel, David E.

2010-01-01

Monolayer protected clusters (MPCs) are small, metal nanoparticles capped with thiolate ligands that have been widely studied for their size-dependent properties and for their ability to be functionalized for biological applications. Common water-soluble MPCs, functionalized by 2-mercaptopropanoyl) amino acetic acid (tiopronin) or glutathione, have been used previously to interface with biological systems. These MPCs are ideal for biological applications not only due to their water-solubility but also their small size (< 5 nm). These characteristics are expected to enable easy biodistribution and clearance. In this report we show an unexpected toxicity is associated with the tiopronin monolayer protected cluster (TMPC), making it incompatible for potential in vivo applications. This toxicity is linked to significant histological damage to the renal tubules, causing mortality at concentrations above 20 μM. We further show how the incorporation of poly-ethylene glycol (PEG) by simple place-exchange reaction eliminates this toxicity. We analyzed gold content within blood and urine and found an increased lifetime of the particle within the bloodstream due to the creation of the mixed monolayer. Also shown was the elimination of kidney damage with the use of the mixed-monolayer particle via Multistix™ analysis, MALDI-TOF MS analysis, and histological examination. Final immunological analysis showed no effect on white blood cell (WBC) count for the unmodified particle and a surprising increase in WBC count with injection of mixed monolayer particles at concentrations higher than 30 μM, suggesting that there may be an immune response to these mixed monolayer nanoparticles at high concentrations; therefore, special attention should be focused on selecting the best capping ligands for use in vivo. These findings make the mixed monolayer an excellent candidate for further biological applications using water-soluble nanoparticles. PMID:20715858

Form, Content, and Gender Differences in Lego[R] Block Creations by Japanese Adolescents

ERIC Educational Resources Information Center

Kato, Daiki; Morita, Miyako

2009-01-01

This study examined general features of Lego block creations produced by Japanese adolescents with no known mental health disorders. The block creations of 33 participants were assessed for form, content, and gender differences. Time spent on the task, amount of area covered, and quantity and types of blocks used were measured and correlated with…

The Application of SECI Model as a Framework of Knowledge Creation in Virtual Learning: Case Study of IUST Virtual Classes

ERIC Educational Resources Information Center

Hosseini, Seyede Mehrnoush

2011-01-01

The research aims to define SECI model of knowledge creation (socialization, externalization, combination, and internalization) as a framework of Virtual class management which can lead to better online teaching-learning mechanisms as well as knowledge creation. It has used qualitative research methodology including researcher's close observation…

Introducing Preservice Teachers to Issues Surrounding Evolution and Creationism via a Mock Trial.

ERIC Educational Resources Information Center

Helgeson, Lars J.; Hoover, John; Sheehan, James

2002-01-01

Describes cooperation between social studies and science education professors to introduce preservice teachers to the evolution versus creationism debate via a mock trial. Uses a hypothetical situation in which a 6th grade teacher was fired for not balancing evolution and creationism in his teaching. Reports that the mock trial slightly increased…

A multifaceted intervention to reduce inappropriate polypharmacy in primary care: research co-creation opportunities in a pilot study.

PubMed

Anderson, Kristen; Foster, Michele M; Freeman, Christopher R; Scott, Ian A

2016-04-18

Co-creation (or co-design) represents the highest form of stakeholder engagement, but it can be infeasible to co-create with all stakeholders through all stages of a research project. The choice of stakeholders for co-design will depend on the study purpose and context of change. For this deprescribing pilot study, general practitioners were recognised as a critical gateway for co-creation, with patients' perspectives of the deprescribing process to be assessed in the evaluation of the pilot.

Vascular Access Creation before Hemodialysis Initiation and Use: A Population-Based Cohort Study

PubMed Central

Al-Jaishi, Ahmed A.; Lok, Charmaine E.; Garg, Amit X.; Zhang, Joyce C.

2015-01-01

Background and objectives In Canada, approximately 17% of patients use an arteriovenous access (fistula or arteriovenous graft) at commencement of hemodialysis, despite guideline recommendations promoting its timely creation and use. It is unclear if this low pattern of use is attributable to the lack of surgical creation or a high nonuse rate. Design, setting, participants, & measurements Using large health care databases in Ontario, Canada, a population-based cohort of adult patients (≥18 years old) who initiated hemodialysis as their first form of RRT between 2001 and 2010 was studied. The aims were to (1) estimate the proportion of patients who had an arteriovenous access created before starting hemodialysis and the proportion who successfully used it at hemodialysis start, (2) test for secular trends in arteriovenous access creation, and (3) estimate the effect of late nephrology referral and patient characteristics on arteriovenous access creation. Results There were 17,183 patients on incident hemodialysis. The mean age was 65.8 years, 60% were men, and 40% were referred late to a nephrologist; 27% of patients (4556 of 17,183) had one or more arteriovenous accesses created, and the median time between arteriovenous access creation and hemodialysis start was 184 days. When late referrals were excluded, 39% of patients (4007 of 10,291) had one or more arteriovenous accesses created, and 27% of patients (2724 of 10,291) used the arteriovenous access. Since 2001, there has been a decline in arteriovenous access creation before hemodialysis initiation. Women, higher numbers of comorbidities, and rural residence were consistently associated with lower rates of arteriovenous access creation. These results persisted even after removing patients with <6 months nephrology care or who had AKI 6 months before starting hemodialysis. Conclusions In Canada, arteriovenous access creation before hemodialysis initiation is low, even among patients followed by a nephrologist. Better understanding of the barriers and influencers of arteriovenous access creation is needed to inform both clinical care and guidelines. PMID:25568219

Vascular access creation before hemodialysis initiation and use: a population-based cohort study.

PubMed

Al-Jaishi, Ahmed A; Lok, Charmaine E; Garg, Amit X; Zhang, Joyce C; Moist, Louise M

2015-03-06

In Canada, approximately 17% of patients use an arteriovenous access (fistula or arteriovenous graft) at commencement of hemodialysis, despite guideline recommendations promoting its timely creation and use. It is unclear if this low pattern of use is attributable to the lack of surgical creation or a high nonuse rate. Using large health care databases in Ontario, Canada, a population-based cohort of adult patients (≥18 years old) who initiated hemodialysis as their first form of RRT between 2001 and 2010 was studied. The aims were to (1) estimate the proportion of patients who had an arteriovenous access created before starting hemodialysis and the proportion who successfully used it at hemodialysis start, (2) test for secular trends in arteriovenous access creation, and (3) estimate the effect of late nephrology referral and patient characteristics on arteriovenous access creation. There were 17,183 patients on incident hemodialysis. The mean age was 65.8 years, 60% were men, and 40% were referred late to a nephrologist; 27% of patients (4556 of 17,183) had one or more arteriovenous accesses created, and the median time between arteriovenous access creation and hemodialysis start was 184 days. When late referrals were excluded, 39% of patients (4007 of 10,291) had one or more arteriovenous accesses created, and 27% of patients (2724 of 10,291) used the arteriovenous access. Since 2001, there has been a decline in arteriovenous access creation before hemodialysis initiation. Women, higher numbers of comorbidities, and rural residence were consistently associated with lower rates of arteriovenous access creation. These results persisted even after removing patients with <6 months nephrology care or who had AKI 6 months before starting hemodialysis. In Canada, arteriovenous access creation before hemodialysis initiation is low, even among patients followed by a nephrologist. Better understanding of the barriers and influencers of arteriovenous access creation is needed to inform both clinical care and guidelines. Copyright © 2015 by the American Society of Nephrology.

Quantum thermodynamics and quantum entanglement entropies in an expanding universe

NASA Astrophysics Data System (ADS)

Farahmand, Mehrnoosh; Mohammadzadeh, Hosein; Mehri-Dehnavi, Hossein

2017-05-01

We investigate an asymptotically spatially flat Robertson-Walker space-time from two different perspectives. First, using von Neumann entropy, we evaluate the entanglement generation due to the encoded information in space-time. Then, we work out the entropy of particle creation based on the quantum thermodynamics of the scalar field on the underlying space-time. We show that the general behavior of both entropies are the same. Therefore, the entanglement can be applied to the customary quantum thermodynamics of the universe. Also, using these entropies, we can recover some information about the parameters of space-time.

Method of making metal oxide ceramic membranes with small pore sizes

DOEpatents

Anderson, Marc A.; Xu, Qunyin

1992-01-01

A method for the production of metal oxide ceramic membranes is composed of very small pore size. The process is particularly useful in the creation of titanium and other transition metal oxide membranes. The method utilizes a sol-gel process in which the rate of particle formation is controlled by substituting a relatively large alcohol in the metal alkoxide and by limiting the available water. Stable, transparent metal oxide ceramic membranes are created having a narrow distribution of pore size, with the pore diameter being manipulable in the range of 5 to 40 Angstroms.

Particle-in-Cell Simulations of the Twisted Magnetospheres of Magnetars. I.

NASA Astrophysics Data System (ADS)

Chen, Alexander Y.; Beloborodov, Andrei M.

2017-08-01

The magnetospheres of magnetars are believed to be filled with electron-positron plasma generated by electric discharge. We present a first numerical experiment demonstrating this process in an axisymmetric magnetosphere with a simple threshold prescription for pair creation, which is applicable to the inner magnetosphere with an ultrastrong field. The {e}+/- discharge occurs in response to the twisting of the closed magnetic field lines by a shear deformation of the magnetar surface, which launches electric currents into the magnetosphere. The simulation shows the formation of an electric “gap” with an unscreened electric field ({\\boldsymbol{E}}\\cdot {\\boldsymbol{B}}\

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calixto, M., E-mail: calixto@ugr.es; Pérez-Romero, E.

We revise the unireps. of U(2, 2) describing conformal particles with continuous mass spectrum from a many-body perspective, which shows massive conformal particles as compounds of two correlated massless particles. The statistics of the compound (boson/fermion) depends on the helicity h of the massless components (integer/half-integer). Coherent states (CS) of particle-hole pairs (“excitons”) are also explicitly constructed as the exponential action of exciton (non-canonical) creation operators on the ground state of unpaired particles. These CS are labeled by points Z (2×2 complex matrices) on the Cartan-Bergman domain D₄=U(2,2)/U(2)², and constitute a generalized (matrix) version of Perelomov U(1, 1) coherent statesmore » labeled by points z on the unit disk D₁=U(1,1)/U(1)². First, we follow a geometric approach to the construction of CS, orthonormal basis, U(2, 2) generators and their matrix elements and symbols in the reproducing kernel Hilbert space H{sub λ}(D₄) of analytic square-integrable holomorphic functions on D₄, which carries a unitary irreducible representation of U(2, 2) with index λϵN (the conformal or scale dimension). Then we introduce a many-body representation of the previous construction through an oscillator realization of the U(2, 2) Lie algebra generators in terms of eight boson operators with constraints. This particle picture allows us for a physical interpretation of our abstract mathematical construction in the many-body jargon. In particular, the index λ is related to the number 2(λ – 2) of unpaired quanta and to the helicity h = (λ – 2)/2 of each massless particle forming the massive compound.« less

Grassmann phase space methods for fermions. II. Field theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalton, B.J., E-mail: bdalton@swin.edu.au; Jeffers, J.; Barnett, S.M.

In both quantum optics and cold atom physics, the behaviour of bosonic photons and atoms is often treated using phase space methods, where mode annihilation and creation operators are represented by c-number phase space variables, with the density operator equivalent to a distribution function of these variables. The anti-commutation rules for fermion annihilation, creation operators suggests the possibility of using anti-commuting Grassmann variables to represent these operators. However, in spite of the seminal work by Cahill and Glauber and a few applications, the use of Grassmann phase space methods in quantum-atom optics to treat fermionic systems is rather rare, thoughmore » fermion coherent states using Grassmann variables are widely used in particle physics. This paper presents a phase space theory for fermion systems based on distribution functionals, which replace the density operator and involve Grassmann fields representing anti-commuting fermion field annihilation, creation operators. It is an extension of a previous phase space theory paper for fermions (Paper I) based on separate modes, in which the density operator is replaced by a distribution function depending on Grassmann phase space variables which represent the mode annihilation and creation operators. This further development of the theory is important for the situation when large numbers of fermions are involved, resulting in too many modes to treat separately. Here Grassmann fields, distribution functionals, functional Fokker–Planck equations and Ito stochastic field equations are involved. Typical applications to a trapped Fermi gas of interacting spin 1/2 fermionic atoms and to multi-component Fermi gases with non-zero range interactions are presented, showing that the Ito stochastic field equations are local in these cases. For the spin 1/2 case we also show how simple solutions can be obtained both for the untrapped case and for an optical lattice trapping potential.« less

PDV-based estimation of ejecta particles' mass-velocity function from shock-loaded tin experiment

NASA Astrophysics Data System (ADS)

Franzkowiak, J.-E.; Prudhomme, G.; Mercier, P.; Lauriot, S.; Dubreuil, E.; Berthe, L.

2018-03-01

A metallic tin plate with a given surface finish of wavelength λ ≃ 60 μm and amplitude h ≃ 8 μm is explosively driven by an electro-detonator with a shock-induced breakout pressure PSB = 28 GPa (unsupported). The resulting dynamic fragmentation process, the so-called "micro-jetting," is the creation of high-speed jets of matter moving faster than the bulk metallic surface. Hydrodynamic instabilities result in the fragmentation of these jets into micron-sized metallic particles constituting a self-expanding cloud of droplets, whose areal mass, velocity, and particle size distributions are unknown. Lithium-niobate-piezoelectric sensor measured areal mass and Photonic Doppler Velocimetry (PDV) was used to get a time-velocity spectrogram of the cloud. In this article, we present both experimental mass and velocity results and we relate the integrated areal mass of the cloud to the PDV power spectral density with the assumption of a power law particle size distribution. Two models of PDV spectrograms are described. The first one accounts for the speckle statistics of the spectrum and the second one describes an average spectrum for which speckle fluctuations are removed. Finally, the second model is used for a maximum likelihood estimation of the cloud's parameters from PDV data. The estimated integrated areal mass from PDV data is found to agree well with piezoelectric results. We highlight the relevance of analyzing PDV data and correlating different diagnostics to retrieve the physical properties of ejecta particles.

Using ePortfolio-Based Learning Approach to Facilitate Knowledge Sharing and Creation among College Students

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Chou, Pao-Nan; Liang, Chaoyan

2018-01-01

The purpose of the present study was to examine the effects of the ePortfolio-based learning approach (ePBLA) on knowledge sharing and creation with 92 college students majoring in electrical engineering as the participants. Multivariate analysis of covariance (MANCOVA) with a covariance of pretest on knowledge sharing and creation was conducted…

The Effects of Learning Organization Culture on the Practices of Human Knowledge-Creation: An Empirical Research Study in Korea

ERIC Educational Resources Information Center

Song, Ji Hoon

2008-01-01

This research aims to identify the influence of learning organization culture on the practices of organizational knowledge-creation. Actionable knowledge-creation practices are put forward as a variable in preference to the learning process itself because they may be more closely related to the achievement of individual and/or organizational…

Assessing the Feasibility of Large-Scale Countercyclical Public Job-Creation. Final Report, Volume III. Selected Implications of Public Job-Creation.

ERIC Educational Resources Information Center

Urban Inst., Washington, DC.

This last of a three-volume report of a study done to assess the feasibility of large-scale, countercyclical public job creation covers the findings regarding the priorities among projects, indirect employment effects, skill imbalances, and administrative issues; and summarizes the overall findings, conclusions, and recommendations. (Volume 1,…

Co-Creating Leadership and Knowledge Creation: Relationships among Leadership Dispositions, Conditions for Knowledge Creation, and Modes of Knowledge Conversion in Principal Mentoring

ERIC Educational Resources Information Center

Anderson, Ryan D.

2016-01-01

This study examines the leadership behaviors and conditions for creating knowledge present during mentoring between mentee principals and mentor principals. Using a survey instrument, 511 mentee principal respondents provided information on the extent of co-creating leadership dispositions, conditions for knowledge creation, and modes of knowledge…

Social media addiction: What is the role of content in YouTube?

PubMed Central

Balakrishnan, Janarthanan; Griffiths, Mark D.

2017-01-01

Background YouTube, the online video creation and sharing site, supports both video content viewing and content creation activities. For a minority of people, the time spent engaging with YouTube can be excessive and potentially problematic. Method This study analyzed the relationship between content viewing, content creation, and YouTube addiction in a survey of 410 Indian-student YouTube users. It also examined the influence of content, social, technology, and process gratifications on user inclination toward YouTube content viewing and content creation. Results The results demonstrated that content creation in YouTube had a closer relationship with YouTube addiction than content viewing. Furthermore, social gratification was found to have a significant influence on both types of YouTube activities, whereas technology gratification did not significantly influence them. Among all perceived gratifications, content gratification had the highest relationship coefficient value with YouTube content creation inclination. The model fit and variance extracted by the endogenous constructs were good, which further validated the results of the analysis. Conclusion The study facilitates new ways to explore user gratification in using YouTube and how the channel responds to it. PMID:28914072

Social media addiction: What is the role of content in YouTube?

PubMed

Balakrishnan, Janarthanan; Griffiths, Mark D

2017-09-01

Background YouTube, the online video creation and sharing site, supports both video content viewing and content creation activities. For a minority of people, the time spent engaging with YouTube can be excessive and potentially problematic. Method This study analyzed the relationship between content viewing, content creation, and YouTube addiction in a survey of 410 Indian-student YouTube users. It also examined the influence of content, social, technology, and process gratifications on user inclination toward YouTube content viewing and content creation. Results The results demonstrated that content creation in YouTube had a closer relationship with YouTube addiction than content viewing. Furthermore, social gratification was found to have a significant influence on both types of YouTube activities, whereas technology gratification did not significantly influence them. Among all perceived gratifications, content gratification had the highest relationship coefficient value with YouTube content creation inclination. The model fit and variance extracted by the endogenous constructs were good, which further validated the results of the analysis. Conclusion The study facilitates new ways to explore user gratification in using YouTube and how the channel responds to it.

More Stable Ties or Better Structure? An Examination of the Impact of Co-author Network on Team Knowledge Creation

PubMed Central

Li, Mingze; Zhuang, Xiaoli; Liu, Wenxing; Zhang, Pengcheng

2017-01-01

This study aims to explore the influence of co-author network on team knowledge creation. Integrating the two traditional perspectives of network relationship and network structure, we examine the direct and interactive effects of tie stability and structural holes on team knowledge creation. Tracking scientific articles published by 111 scholars in the research field of human resource management from the top 8 American universities, we analyze scholars’ scientific co-author networks. The result indicates that tie stability changes the teams’ information processing modes and, when graphed, results in an inverted U-shape relationship between tie stability and team knowledge creation. Moreover, structural holes in co-author network are proved to be harmful to team knowledge sharing and diffusion, thereby impeding team knowledge creation. Also, tie stability and structural hole interactively influence team knowledge creation. When the number of structural hole is low in the co-author network, the graphical representation of the relationship between tie stability and team knowledge creation tends to be a more distinct U-shape. PMID:28993744

More Stable Ties or Better Structure? An Examination of the Impact of Co-author Network on Team Knowledge Creation.

PubMed

Li, Mingze; Zhuang, Xiaoli; Liu, Wenxing; Zhang, Pengcheng

2017-01-01

This study aims to explore the influence of co-author network on team knowledge creation. Integrating the two traditional perspectives of network relationship and network structure, we examine the direct and interactive effects of tie stability and structural holes on team knowledge creation. Tracking scientific articles published by 111 scholars in the research field of human resource management from the top 8 American universities, we analyze scholars' scientific co-author networks. The result indicates that tie stability changes the teams' information processing modes and, when graphed, results in an inverted U-shape relationship between tie stability and team knowledge creation. Moreover, structural holes in co-author network are proved to be harmful to team knowledge sharing and diffusion, thereby impeding team knowledge creation. Also, tie stability and structural hole interactively influence team knowledge creation. When the number of structural hole is low in the co-author network, the graphical representation of the relationship between tie stability and team knowledge creation tends to be a more distinct U-shape.

Conservative bin-to-bin fractional collisions

NASA Astrophysics Data System (ADS)

Martin, Robert

2016-11-01

Particle methods such as direct simulation Monte Carlo (DSMC) and particle-in-cell (PIC) are commonly used to model rarefied kinetic flows for engineering applications because of their ability to efficiently capture non-equilibrium behavior. The primary drawback to these methods relates to the poor convergence properties due to the stochastic nature of the methods which typically rely heavily on high degrees of non-equilibrium and time averaging to compensate for poor signal to noise ratios. For standard implementations, each computational particle represents many physical particles which further exacerbate statistical noise problems for flow with large species density variation such as encountered in flow expansions and chemical reactions. The stochastic weighted particle method (SWPM) introduced by Rjasanow and Wagner overcome this difficulty by allowing the ratio of real to computational particles to vary on a per particle basis throughout the flow. The DSMC procedure must also be slightly modified to properly sample the Boltzmann collision integral accounting for the variable particle weights and to avoid the creation of additional particles with negative weight. In this work, the SWPM with necessary modification to incorporate the variable hard sphere (VHS) collision cross section model commonly used in engineering applications is first incorporated into an existing engineering code, the Thermophysics Universal Research Framework. The results and computational efficiency are compared to a few simple test cases using a standard validated implementation of the DSMC method along with the adapted SWPM/VHS collision using an octree based conservative phase space reconstruction. The SWPM method is then further extended to combine the collision and phase space reconstruction into a single step which avoids the need to create additional computational particles only to destroy them again during the particle merge. This is particularly helpful when oversampling the collision integral when compared to the standard DSMC method. However, it is found that the more frequent phase space reconstructions can cause added numerical thermalization with low particle per cell counts due to the coarseness of the octree used. However, the methods are expected to be of much greater utility in transient expansion flows and chemical reactions in the future.

Richmond public transportation study report.

DOT National Transportation Integrated Search

2000-05-01

This study looked at the possible costs and benefits associated with the creation of a small deviated fixed route bus service in Richmond. It concluded that the circumstances in Richmond favor the creation of such a system. It also concluded that onl...

Cobweb as novel biomaterial for the green and eco-friendly synthesis of silver nanoparticles

NASA Astrophysics Data System (ADS)

Lateef, A.; Ojo, S. A.; Azeez, M. A.; Asafa, T. B.; Yekeen, T. A.; Akinboro, A.; Oladipo, I. C.; Gueguim-Kana, E. B.; Beukes, L. S.

2016-08-01

In this study, spider cobweb as a novel biomaterial was used for the green synthesis of silver nanoparticles (AgNPs). The synthesized AgNPs were characterized using UV-Vis spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and transmission electron microscopy. The efficacy of biosynthesized particles as antibacterial agents was evaluated using multi-drug resistant clinical bacterial isolates through sensitivity testing with AgNPs and combination of AgNPs with some selected antibiotics. In addition, the potential application of the particles as additives in paints was demonstrated using some bacterial and fungal isolates. The synthesized AgNPs which were dark brown in color displayed maximum absorbance at the wavelength of 436 nm. It was observed that the reaction mixture of 1:40 (extract:AgNO3 solution) at pH of 8.5 produced particles with maximum absorbance at 436 nm. The FTIR spectrum showed peaks at 3298, 2359, 2089, and 1635 cm-1, indicating that proteins were the capping and stabilization molecules in the synthesis of AgNPs. The particles were spherical in shape with size ranging about 3-50 nm. The energy-dispersive X-ray analysis showed the presence of silver as the most prominent metal, while the selected area electron diffraction pattern conformed to the face-centered cubic phase and crystalline nature of AgNPs. The AgNPs inhibited the growth of several bacterial isolates including S. aureus, E. coli, Klebsiella granulomatis and P. aeruginosa in the range of 10-17 mm at concentration of 100 µg/ml. It was also demonstrated that AgNPs potentiated the activities of augmentin, ofloxacin and cefixime in the AgNP-antibiotic synergy studies. Similarly, the inclusion of AgNPs as additive in white emulsion paint led to the total inhibition of growth of E. coli, P. aeruginosa, Aspergillus niger and A. fumigatus. To the best of our knowledge, this is the first report of the use of cobweb for the green synthesis of AgNPs. The immense antimicrobial activities of the particles can be explored in the creation of novel products, where it can be used as additive to protect materials against microbial attack.

Novel Zirconia Surface Treatments for Enhanced Osseointegration: Laboratory Characterization

PubMed Central

Ewais, Ola H.; Al Abbassy, Fayza; Ghoneim, Mona M.; Aboushelib, Moustafa N.

2014-01-01

Purpose. The aim of this study was to evaluate three novel surface treatments intended to improve osseointegration of zirconia implants: selective infiltration etching treatment (SIE), fusion sputtering (FS), and low pressure particle abrasion (LPPA). The effects of surface treatments on roughness, topography, hardness, and porosity of implants were also assessed. Materials and Methods. 45 zirconia discs (19 mm in diameter × 3 mm in thickness) received 3 different surface treatments: selective infiltration etching, low pressure particle abrasion with 30 µm alumina, and fusion sputtering while nontreated surface served as control. Surface roughness was evaluated quantitatively using profilometery, porosity was evaluated using mercury prosimetry, and Vickers microhardness was used to assess surface hardness. Surface topography was analyzed using scanning and atomic force microscopy (α = 0.05). Results. There were significant differences between all groups regarding surface roughness (F = 1678, P < 0.001), porosity (F = 3278, P < 0.001), and hardness (F = 1106.158, P < 0.001). Scanning and atomic force microscopy revealed a nanoporous surface characteristic of SIE, and FS resulted in the creation of surface microbeads, while LPPA resulted in limited abrasion of the surface. Conclusion. Within the limitations of the study, changes in surface characteristics and topography of zirconia implants have been observed after different surface treatment approaches. Thus possibilities for enhanced osseointegration could be additionally offered. PMID:25349610

Numerical simulations of flying and swimming of biological systems with the viscous vortex particle method

NASA Astrophysics Data System (ADS)

Eldredge, Jeff

2005-11-01

Many biological mechanisms of locomotion involve the interaction of a fluid with a deformable surface undergoing large unsteady motion. Analysis of such problems poses a significant challenge to conventional grid-based computational approaches. Particularly in the moderate Reynolds number regime where many insects and fish function, viscous and inertial processes are both important, and vorticity serves a crucial role. In this work, the viscous vortex particle method is shown to provide an efficient, intuitive simulation approach for investigation of these biological systems. In contrast with a grid-based approach, the method solves the Navier--Stokes equations by tracking computational particles that carry smooth blobs of vorticity and exchange strength with one another to account for viscous diffusion. Thus, computational resources are focused on the physically relevant features of the flow, and there is no need for artificial boundary conditions. Building from previously-developed techniques for the creation of vorticity to enforce no-throughflow and no-slip conditions, the present method is extended to problems of coupled fluid--body dynamics by enforcement of global conservation of momenta. The application to several two-dimensional model problems is demonstrated, including single and multiple flapping wings and free swimming of a three-linkage fish.

Precipitation of a monoclonal antibody by soluble tungsten.

PubMed

Bee, Jared S; Nelson, Stephanie A; Freund, Erwin; Carpenter, John F; Randolph, Theodore W

2009-09-01

Tungsten microparticles may be introduced into some pre-filled syringes during the creation of the needle hole. In turn, these microcontaminants may interact with protein therapeutics to produce visible particles. We found that soluble tungsten polyanions formed in acidic buffer below pH 6.0 can precipitate a monoclonal antibody within seconds. Soluble tungsten in pH 5.0 buffer at about 3 ppm was enough to cause precipitation of a mAb formulated at 0.02 mg/mL. The secondary structure of the protein was near-native in the collected precipitate. Our observations are consistent with the coagulation of a monoclonal antibody by tungsten polyanions. Tungsten-induced precipitation should only be a concern for proteins formulated below about pH 6.0 since tungsten polyanions are not formed at higher pHs. We speculate that the heterogenous nature of particle contamination within the poorly mixed syringe tip volume could mean that a specification for tungsten contamination based on the entire syringe volume is not appropriate. The potential potency of tungsten metal contamination is highlighted by the small number of particles that would be required to generate soluble tungsten levels needed to coagulate this antibody at pH 5.0.

Precipitation of a Monoclonal Antibody by Soluble Tungsten

PubMed Central

Bee, Jared S.; Nelson, Stephanie A.; Freund, Erwin; Carpenter, John F.; Randolph, Theodore W.

2009-01-01

Tungsten microparticles may be introduced into some pre-filled syringes during the creation of the needle hole. In turn, these microcontaminants may interact with protein therapeutics to produce visible particles. We found that soluble tungsten polyanions formed in acidic buffer below pH 6.0 can precipitate a monoclonal antibody within seconds. Soluble tungsten in pH 5.0 buffer at about 3 ppm was enough to cause precipitation of a mAb formulated at 0.02 mg/mL. The secondary structure of the protein was near-native in the collected precipitate. Our observations are consistent with the coagulation of a monoclonal antibody by tungsten polyanions. Tungsten-induced precipitation should only be a concern for proteins formulated below about pH 6.0 since tungsten polyanions are not formed at higher pHs. We speculate that the heterogenous nature of particle contamination within the poorly mixed syringe tip volume could mean that a specification for tungsten contamination based on the entire syringe volume is not appropriate. The potential potency of tungsten metal contamination is highlighted by the small number of particles that would be required to generate soluble tungsten levels needed to coagulate this antibody at pH 5.0. PMID:19230018

An efficient method for the creation of tunable optical line traps via control of gradient and scattering forces.

PubMed

Tietjen, Gregory T; Kong, Yupeng; Parthasarathy, Raghuveer

2008-07-07

Interparticle interaction energies and other useful physical characteristics can be extracted from the statistical properties of the motion of particles confined by an optical line trap. In practice, however, the potential energy landscape, U(x), imposed by the line provides an extra, and in general unknown, influence on particle dynamics. We describe a new class of line traps in which both the optical gradient and scattering forces acting on a trapped particle are designed to be linear functions of the line coordinate and in which their magnitude can be counterbalanced to yield a flat U(x). These traps are formed using approximate solutions to general relations concerning non-conservative optical forces that have been the subject of recent investigations [Y. Roichman, B. Sun, Y. Roichman, J. Amato-Grill, and D. G. Grier, Phys. Rev. Lett. 100, 013602-4 (2008).]. We implement the lines using holographic optical trapping and measure the forces acting on silica microspheres, demonstrating the tunability of the confining potential energy landscape. Furthermore, we show that our approach efficiently directs available laser power to the trap, in contrast to other methods.

Formation of Heterogeneous Powder Coatings with a Two-Level Micro-and Nanocomposite Structure under Gas-Dynamic Spraying Conditions

NASA Astrophysics Data System (ADS)

Aborkin, A. V.; Alymov, M. I.; Arkhipov, V. E.; Khrenov, D. S.

2018-02-01

Heterogeneous coatings have been deposited by the cold gas-dynamic spraying of mechanically synthesized AMg2/graphite + Al2O3 powders. A specific feature of the coatings formed is the existence of a two-level micro-and nanocomposite structure. It has been established that an increase in the content of microsized Al2O3 particles in the mixture from 10 to 30 wt % produces a twofold increase in the thickness of the coating deposited for the same time period from 140 to 310 μm. A further growth in the content of microsized Al2O3 particles in the mixture up to 50 wt % leads to a decrease in the thickness of the coating formed to 40 μm. The manufactured coatings have a high microhardness ranging from 1.7 to 3.2 GPa depending on their composition. The high microhardness of these coatings is caused by an increase in the hardness of the matrix material due to the creation of a nanocomposite structure, which strengthens the immobilization of microsized Al2O3 particles in it, thus improving the properties of the heterogeneous coating as a whole.

Breakage mechanics for granular materials in surface-reactive environments

NASA Astrophysics Data System (ADS)

Zhang, Yida; Buscarnera, Giuseppe

2018-03-01

It is known that the crushing behaviour of granular materials is sensitive to the state of the fluids occupying the pore space. Here, a thermomechanical theory is developed to link such macroscopic observations with the physico-chemical processes operating at the microcracks of individual grains. The theory relies on the hypothesis that subcritical fracture propagation at intra-particle scale is the controlling mechanism for the rate-dependent, water-sensitive compression of granular specimens. First, the fracture of uniaxially compressed particles in surface-reactive environments is studied in light of irreversible thermodynamics. Such analysis recovers the Gibbs adsorption isotherm as a central component linking the reduction of the fracture toughness of a solid to the increase of vapour concentration. The same methodology is then extended to assemblies immersed in wet air, for which solid-fluid interfaces have been treated as a separate phase. It is shown that this choice brings the solid surface energy into the dissipation equations of the granular matrix, thus providing a pathway to (i) integrate the Gibbs isotherm with the continuum description of particle assemblies and (ii) reproduce the reduction of their yield strength in presence of high relative humidity. The rate-effects involved in the propagation of cracks and the evolution of breakage have been recovered by considering non-homogenous dissipation potentials associated with the creation of surface area at both scales. It is shown that the proposed model captures satisfactorily the compression response of different types of granular materials subjected to varying relative humidity. This result was achieved simply by using parameters based on the actual adsorption characteristics of the constituting minerals. The theory therefore provides a physically sound and thermodynamically consistent framework to study the behaviour of granular solids in surface-reactive environments.

Development of the beam extraction synchronization system at the Fermilab Booster

NASA Astrophysics Data System (ADS)

Seiya, K.; Chaurize, S.; Drennan, C. C.; Pellico, W.; Sullivan, T.; Triplett, A. K.; Waller, A. M.

2015-11-01

The new beam extraction synchronization control system called "Magnetic Cogging" was developed at the Fermilab Booster and it replaces a system called "RF Cogging" as part of the Proton Improvement Plan (PIP).[1] The flux throughput goal for the PIP is 2.2×1017 protons per hour, which is double the present flux. The flux increase will be accomplished by doubling the number of beam cycles which, in turn, will double the beam loss in the Booster accelerator if nothing else is done. The Booster accelerates beam from 400 MeV to 8 GeV and extracts it to the Main Injector (MI) or Recycler Ring (RR). Cogging controls the beam extraction gap position which is created early in the Booster cycle and synchronizes the gap to the rising edge of the Booster extraction kicker and the MI/RR injection kicker. The RF Cogging system controls the gap position by changing only the radial position of the beam thus limiting the beam aperture and creating beam loss due to beam scraping. The Magnetic Cogging system controls the gap position with the magnetic field of the dipole correctors while the radial position feedback keeps the beam on a central orbit. Also with Magnetic Cogging the gap creation can occur earlier in the Booster cycle when the removed particles are at a lower energy. Thus Magnetic Cogging reduces the deposited energy of the lost particles (beam energy loss) and results in less beam loss activation. Energy loss was reduced by 40% by moving the gap creation energy from 700 MeV to 400 MeV when the Booster Cogging system was switched from RF Cogging to Magnetic Cogging in March 2015.

Real-time dynamics of lattice gauge theories with a few-qubit quantum computer

NASA Astrophysics Data System (ADS)

Martinez, Esteban A.; Muschik, Christine A.; Schindler, Philipp; Nigg, Daniel; Erhard, Alexander; Heyl, Markus; Hauke, Philipp; Dalmonte, Marcello; Monz, Thomas; Zoller, Peter; Blatt, Rainer

2016-06-01

Gauge theories are fundamental to our understanding of interactions between the elementary constituents of matter as mediated by gauge bosons. However, computing the real-time dynamics in gauge theories is a notorious challenge for classical computational methods. This has recently stimulated theoretical effort, using Feynman’s idea of a quantum simulator, to devise schemes for simulating such theories on engineered quantum-mechanical devices, with the difficulty that gauge invariance and the associated local conservation laws (Gauss laws) need to be implemented. Here we report the experimental demonstration of a digital quantum simulation of a lattice gauge theory, by realizing (1 + 1)-dimensional quantum electrodynamics (the Schwinger model) on a few-qubit trapped-ion quantum computer. We are interested in the real-time evolution of the Schwinger mechanism, describing the instability of the bare vacuum due to quantum fluctuations, which manifests itself in the spontaneous creation of electron-positron pairs. To make efficient use of our quantum resources, we map the original problem to a spin model by eliminating the gauge fields in favour of exotic long-range interactions, which can be directly and efficiently implemented on an ion trap architecture. We explore the Schwinger mechanism of particle-antiparticle generation by monitoring the mass production and the vacuum persistence amplitude. Moreover, we track the real-time evolution of entanglement in the system, which illustrates how particle creation and entanglement generation are directly related. Our work represents a first step towards quantum simulation of high-energy theories using atomic physics experiments—the long-term intention is to extend this approach to real-time quantum simulations of non-Abelian lattice gauge theories.

Polymer-Particle Nanocomposites: Size and Dispersion Effects

NASA Astrophysics Data System (ADS)

Moll, Joseph

Polymer-particle nanocomposites are used in industrial processes to enhance a broad range of material properties (e.g. mechanical, optical, electrical and gas permeability properties). This dissertation will focus on explanation and quantification of mechanical property improvements upon the addition of nanoparticles to polymeric materials. Nanoparticles, as enhancers of mechanical properties, are ubiquitous in synthetic and natural materials (e.g. automobile tires, packaging, bone), however, to date, there is no thorough understanding of the mechanism of their action. In this dissertation, silica (SiO2) nanoparticles, both bare and grafted with polystyrene (PS), are studied in polymeric matrices. Several variables of interest are considered, including particle dispersion state, particle size, length and density of grafted polymer chains, and volume fraction of SiO2. Polymer grafted nanoparticles behave akin to block copolymers, and this is critically leveraged to systematically vary nanoparticle dispersion and examine its role on the mechanical reinforcement in polymer based nanocomposites in the melt state. Rheology unequivocally shows that reinforcement is maximized by the formation of a transient, but long-lived, percolating polymer-particle network with the particles serving as the network junctions. The effects of dispersion and weight fraction of filler on nanocomposite mechanical properties are also studied in a bare particle system. Due to the interest in directional properties for many different materials, different means of inducing directional ordering of particle structures are also studied. Using a combination of electron microscopy and x-ray scattering, it is shown that shearing anisotropic NP assemblies (sheets or strings) causes them to orient, one in front of the other, into macroscopic two-dimensional structures along the flow direction. In contrast, no such flow-induced ordering occurs for well dispersed NPs or spherical NP aggregates! This work also addresses the interfacial, rigid polymer layer, or 'bound layer' which has long been of interest in polymer nanocomposites and polymer thin films. The divergent properties of the 'bound layer' as compared to the bulk material can have very important effects on properties, including mechanical properties. This is especially true in polymer nanocomposites, where at high weight fractions, 'bound layer' polymer can easily make up 20% or more of total material! Here we quantify this layer of bound polymer as a function of particle size, polymer molecular weight and other variables, primarily using thermogravimetric analysis but also dynamic light scattering and differential scanning calorimetry. We find that as nanoparticles become smaller, the 'bound layer' systematically decreases in thickness. This result is quite relevant to explanations of many polymer nanocomposite properties that depend on size, including mechanical and barrier properties. Many additional important and new results are reported herein. These include the importance of dispersion state in the resulting mechanical properties of polymer-particle nanocomposites, where a systematic study showed an optimal dispersion state of a connected particle network. An additional and unexpected finding in this system was the critical dependence of composite properties on grafted chain length of particles. As the grafted chain length is increased, the strain which leads to yielding in a steady shear experiment is increased in a linear relationship. At very high rates, this yielding process completely switches mechanisms, from yielding of the particle network to yielding of the entangled polymer network! A surprising correlation between the amount of bound polymer in solution and in the bulk was also found and is interpreted herein. Self-assembly was further explored in a range of different systems and it was found that grafted particles and there mimics have vast potential in the creation of a wide array of particle superstructures. In concert, these experiments provide a comprehensive picture of mechanical reinforcement in polymer-particle nanocomposites. Not only is the dispersion state of the particles crucial, but the presence of grafted chains is also so for proper reinforcement. Here many routes to ideal dispersion are detailed and the important role of grafted chains is also resolved.

Using creation science to demonstrate evolution: application of a creationist method for visualizing gaps in the fossil record to a phylogenetic study of coelurosaurian dinosaurs.

PubMed

Senter, P

2010-08-01

It is important to demonstrate evolutionary principles in such a way that they cannot be countered by creation science. One such way is to use creation science itself to demonstrate evolutionary principles. Some creation scientists use classic multidimensional scaling (CMDS) to quantify and visualize morphological gaps or continuity between taxa, accepting gaps as evidence of independent creation and accepting continuity as evidence of genetic relatedness. Here, I apply CMDS to a phylogenetic analysis of coelurosaurian dinosaurs and show that it reveals morphological continuity between Archaeopteryx, other early birds, and a wide range of nonavian coelurosaurs. Creation scientists who use CMDS must therefore accept that these animals are genetically related. Other uses of CMDS for evolutionary biologists include the identification of taxa with much missing evolutionary history and the tracing of the progressive filling of morphological gaps in the fossil record through successive years of discovery.

Readmission for dehydration or renal failure after ileostomy creation.

PubMed

Paquette, Ian M; Solan, Patrick; Rafferty, Janice F; Ferguson, Martha A; Davis, Bradley R

2013-08-01

Ileostomy creation is a commonly performed operation in colorectal surgery; however, many patients develop complications such as dehydration postoperatively. Dehydration is often severe enough to warrant hospital readmission and may result in renal failure. The true incidence of this complication has not been well described. The aim of this study was to identify the rate of hospital readmission secondary to dehydration or renal failure within 30 days of ileostomy creation. Retrospective review of all patients undergoing ileostomy creation from 2007 to 2011 in a single colorectal practice of 4 surgeons was performed. Charts were reviewed to identify patients readmitted for dehydration or renal failure within 30 days of operation. Data were then analyzed to identify predictors of readmission, dehydration, and renal failure. Subset analysis compared patients readmitted with simple dehydration versus patients with renal failure. Two hundred one patients undergoing colorectal operations that included ileostomy creation within a 4-year period at a single institution for a variety of indications were included. The primary outcome measured was readmission for dehydration or renal failure. We observed a 17% 30-day readmission rate for dehydration or renal failure following ileostomy creation. Age greater than 50 was identified as an independent predictor of readmission with renal failure, whereas IPAA was predictive of readmission for simple dehydration, but not renal failure. Patients admitted with renal failure had significantly longer hospital stays and median hospital charges after readmission in comparison with patients admitted with simple dehydration. This study was limited by its retrospective nature and its limited sample size. Hospital readmission due to dehydration or renal failure following ileostomy creation is common, with age >50 being the strongest predictor for renal failure. Appropriate strategies to decrease dehydration and renal failure following ileostomy creation need to be investigated.

Study of zeolite influence on analytical characteristics of urea biosensor based on ion-selective field-effect transistors

PubMed Central

2014-01-01

A possibility of the creation of potentiometric biosensor by adsorption of enzyme urease on zeolite was investigated. Several variants of zeolites (nano beta, calcinated nano beta, silicalite, and nano L) were chosen for experiments. The surface of pH-sensitive field-effect transistors was modified with particles of zeolites, and then the enzyme was adsorbed. As a control, we used the method of enzyme immobilization in glutaraldehyde vapour (without zeolites). It was shown that all used zeolites can serve as adsorbents (with different effectiveness). The biosensors obtained by urease adsorption on zeolites were characterized by good analytical parameters (signal reproducibility, linear range, detection limit and the minimal drift factor of a baseline). In this work, it was shown that modification of the surface of pH-sensitive field-effect transistors with zeolites can improve some characteristics of biosensors. PMID:24636423

Signature energetic analysis of accelerate electron beam after first acceleration station by accelerating stand of Joint Institute for Nuclear Research

NASA Astrophysics Data System (ADS)

Sledneva, A. S.; Kobets, V. V.

2017-06-01

The linear electron accelerator based on the LINAC - 800 accelerator imported from the Netherland is created at Joint Institute for Nuclear Research in the framework of the project on creation of the Testbed with an electron beam of a linear accelerator with an energy up to 250 MV. Currently two accelerator stations with a 60 MV energy of a beam are put in operation and the work is to put the beam through accelerating section of the third accelerator station. The electron beam with an energy of 23 MeV is used for testing the crystals (BaF2, CsI (native), and LYSO) in order to explore the opportunity to use them in particle detectors in experiments: Muon g-2, Mu2e, Comet, whose preparation requires a detailed study of the detectors properties such as their irradiation by the accelerator beams.

Composites of Polymer Hydrogels and Nanoparticulate Systems for Biomedical and Pharmaceutical Applications

PubMed Central

Zhao, Fuli; Yao, Dan; Guo, Ruiwei; Deng, Liandong; Dong, Anjie; Zhang, Jianhua

2015-01-01

Due to their unique structures and properties, three-dimensional hydrogels and nanostructured particles have been widely studied and shown a very high potential for medical, therapeutic and diagnostic applications. However, hydrogels and nanoparticulate systems have respective disadvantages that limit their widespread applications. Recently, the incorporation of nanostructured fillers into hydrogels has been developed as an innovative means for the creation of novel materials with diverse functionality in order to meet new challenges. In this review, the fundamentals of hydrogels and nanoparticles (NPs) were briefly discussed, and then we comprehensively summarized recent advances in the design, synthesis, functionalization and application of nanocomposite hydrogels with enhanced mechanical, biological and physicochemical properties. Moreover, the current challenges and future opportunities for the use of these promising materials in the biomedical sector, especially the nanocomposite hydrogels produced from hydrogels and polymeric NPs, are discussed. PMID:28347111

STABILITY OF THE NEUTRON DOSE DETERMINATION ALGORITHM FOR PERSONAL NEUTRON DOSEMETERS AT DIFFERENT RADON GAS EXPOSURES.

PubMed

Mayer, Sabine; Boschung, Markus; Butterweck, Gernot; Assenmacher, Frank; Hohmann, Eike

2016-09-01

Since 2008 the Paul Scherrer Institute (PSI) has been using a microscope-based automatic scanning system for assessing personal neutron doses with a dosemeter based on PADC. This scanning system, known as TASLImage, includes a comprehensive characterisation of tracks. The distributions of several specific track characteristics such as size, shape and optical density are compared with a reference set to discriminate tracks of alpha particles and non-track background. Due to the dosemeter design at PSI, it is anticipated that radon should not significantly contribute to the creation of additional tracks in the PADC detector. The present study tests the stability of the neutron dose determination algorithm of the personal neutron dosemeter system in operation at PSI at different radon gas exposures. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Phase behavior of a family of truncated hard cubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gantapara, Anjan P., E-mail: A.P.Gantapara@uu.nl; Dijkstra, Marjolein, E-mail: M.Dijkstra1@uu.nl; Graaf, Joost de

2015-02-07

In continuation of our work in Gantapara et al., [Phys. Rev. Lett. 111, 015501 (2013)], we investigate here the thermodynamic phase behavior of a family of truncated hard cubes, for which the shape evolves smoothly from a cube via a cuboctahedron to an octahedron. We used Monte Carlo simulations and free-energy calculations to establish the full phase diagram. This phase diagram exhibits a remarkable richness in crystal and mesophase structures, depending sensitively on the precise particle shape. In addition, we examined in detail the nature of the plastic crystal (rotator) phases that appear for intermediate densities and levels of truncation.more » Our results allow us to probe the relation between phase behavior and building-block shape and to further the understanding of rotator phases. Furthermore, the phase diagram presented here should prove instrumental for guiding future experimental studies on similarly shaped nanoparticles and the creation of new materials.« less

Effect of the temporal laser pulse asymmetry on pair production processes during intense laser-electron scattering

NASA Astrophysics Data System (ADS)

Hojbota, C. I.; Kim, Hyung Taek; Kim, Chul Min; Pathak, V. B.; Nam, Chang Hee

2018-06-01

We investigate the effects of laser pulse shape on strong-field quantum electrodynamics (QED) processes during the collision between a relativistic electron beam and an intense laser pulse. The interplay between high-energy photon emission and two pair production processes, i.e. nonlinear Breit–Wheeler (BW) and Trident, was investigated using particle-in-cell simulations. We found that the temporal evolution of these two processes could be controlled by using laser pulses with different degrees of asymmetry. The temporal envelope of the laser pulse can significantly affect the number of pairs coming from the Trident process, while the nonlinear BW process is less sensitive to it. This study shows that the two QED processes can be examined with state-of-the-art petawatt lasers and the discrimination of the two pair creation processes is feasible by adjusting the temporal asymmetry of the colliding laser pulse.

Free Mesh Method: fundamental conception, algorithms and accuracy study

PubMed Central

YAGAWA, Genki

2011-01-01

The finite element method (FEM) has been commonly employed in a variety of fields as a computer simulation method to solve such problems as solid, fluid, electro-magnetic phenomena and so on. However, creation of a quality mesh for the problem domain is a prerequisite when using FEM, which becomes a major part of the cost of a simulation. It is natural that the concept of meshless method has evolved. The free mesh method (FMM) is among the typical meshless methods intended for particle-like finite element analysis of problems that are difficult to handle using global mesh generation, especially on parallel processors. FMM is an efficient node-based finite element method that employs a local mesh generation technique and a node-by-node algorithm for the finite element calculations. In this paper, FMM and its variation are reviewed focusing on their fundamental conception, algorithms and accuracy. PMID:21558752

Electron Pressure Anisotropy in the Terrestrial Reconnection Experiment and the Magnetospheric Multiscale Mission

NASA Astrophysics Data System (ADS)

Myers, Rachel; Egedal, Jan; Olson, Joseph; Greess, Samuel; Millet-Ayala, Alexander; Clark, Michael; Nonn, Paul; Wallace, John; Forest, Cary

2017-10-01

The NASA Magnetospheric Multiscale (MMS) Mission seeks to measure heating and motion of charged particles from reconnection events in the magnetotail and dayside magnetopause. MMS is paralleled by the Terrestrial Reconnection Experiment (TREX) at the Wisconsin Plasma Astrophysics Laboratory (WiPAL) in its study of collisionless magnetic reconnection. In the regimes seen by TREX and MMS, electron pressure anisotropy should develop, driving large-scale current layer formation. MMS has witnessed anisotropy, but the spatial coverage of the data is too limited to determine how the pressure anisotropy affects jet and current layer creation. Measurements of pressure anisotropy on TREX will be presented, and implications for reconnecting current layer structure in the magnetosphere, as measured by MMS, will be discussed. This research was conducted with support from a UW-Madison University Fellowship as well as the NSF/DOE award DE-SC0013032.

Condensation versus diffusion. A spatial-scale-independent theory of aggregate structures in edible oils: applications to model systems and commercial shortenings studied via rheology and USAXS

NASA Astrophysics Data System (ADS)

Pink, David A.; Peyronel, Fernanda; Quinn, Bonnie; Singh, Pratham; Marangoni, Alejandro G.

2015-09-01

Understanding how solid fats structures come about in edible oils and quantifying their structures is of fundamental importance in developing edible oils with pre-selected characteristics. We considered the great range of fractal dimensions, from 1.91 to 2.90, reported from rheological measurements. We point out that, if the structures arise via DLA/RLA or DLCA/RLCA, as has been established using ultra small angle x-ray scattering (USAXS), we would expect fractal dimensions in the range ~1.7 to 2.1, and ~2.5 or ~3.0. We present new data for commercial fats and show that the fractal dimensions deduced lie outside these values. We have developed a model in which competition between two processes can lead to the range of fractal dimensions observed. The two processes are (i) the rate at which the solid fat particles are created as the temperature is decreased, and (ii) the rate at which these particles diffuse, thereby meeting and forming aggregates. We assumed that aggregation can take place essentially isotropically and we identified two characteristic times: a time characterizing the rate of creation of solid fats, {τ\\text{create}}(T)\\equiv 1/{{R}S}(T) , where {{R}S}(T) is the rate of solid condensation (cm3 s-1), and the diffusion time of solid fats, {τ\\text{diff}}≤ft(T,{{c}S}\\right)=< {{r}2}> /6{D}≤ft(T,{{c}S}\\right) , where {D}≤ft(T,{{c}S}\\right) is their diffusion coefficient and < {{r}2}> is the typical average distance that fats must move in order to aggregate. The intent of this model is to show that a simple process can lead to a wide range of fractal dimensions. We showed that in the limit of very fast solid creation, {τ\\text{create}}\\ll {τ\\text{diff}} the fractal dimension is predicted to be that of DLCA, ~1.7, relaxing to that of RLCA, 2.0-2.1, and that in the limit of very slow solid creation, {τ\\text{create}}\\gg {τ\\text{diff}} , the fractal dimension is predicted to be that obtained via DLA, ~2.5, relaxing to that of RLA, 3.0. We predict that, given a system which satisfies our model assumptions and which can either be cooled rapidly or cooled slowly to yield fractal dimensions {{D}\\text{rapid}} and {{D}\\text{slow}}~ then {{D}\\text{rapid}}≤slant {{D}\\text{slow}} . This is supported by both rheological [1] and USAXS measurements [2, 3] even though the latter models do not conform to the assumptions of those presented here.

Hiding an elephant: heavy sterile neutrino with large mixing angle does not contradict cosmology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bezrukov, F.; Chudaykin, A.; Gorbunov, D., E-mail: Fedor.Bezrukov@manchester.ac.uk, E-mail: chudy@ms2.inr.ac.ru, E-mail: gorby@ms2.inr.ac.ru

We study a model of a keV-scale sterile neutrino with a relatively large mixing with the Standard Model sector. Usual considerations predict active generation of such particles in the early Universe, which leads to constraints from the total Dark Matter density and absence of X-ray signal from sterile neutrino decay. These bounds together may deem any attempt of creation of the keV scale sterile neutrino in the laboratory unfeasible. We argue that for models with a hidden sector coupled to the sterile neutrino these bounds can be evaded, opening new perspectives for the direct studies at neutrino experiments such asmore » Troitsk ν-mass and KATRIN. We estimate the generation of sterile neutrinos in scenarios with the hidden sector dynamics keeping the sterile neutrinos either massless or superheavy in the early Universe. In both cases the generation by oscillations from active neutrinos in plasma is suppressed.« less

Self-organizing Large-scale Structures in Earth's Foreshock Waves

NASA Astrophysics Data System (ADS)

Ganse, U.; Pfau-Kempf, Y.; Turc, L.; Hoilijoki, S.; von Alfthan, S.; Vainio, R. O.; Palmroth, M.

2017-12-01

Earth's foreshock is populated by plasma waves in the ULF regime, assumed to be caused by wave instabilities of shock-reflected particle beams. While in-situ observation of these waves has provided plentiful data of their amplitudes, frequencies, obliquities and relation to local plasma conditions, global-scale structures are hard to grasp from observation data alone. The hybrid-Vlasov simulation system Vlasiator, designed for kinetic modeling of the Earth's magnetosphere, has been employed to study foreshock formation under radial and near-radial IMF conditions on global scales. Structures arising in the foreshock can be comprehensively studied and directly compared to observation results. Our modeling results show that foreshock waves present emergent large-scale structures, in which regions of waves with similar phase exist. At the interfaces of these regions ("spines") we observe high wave obliquity, higher beam densities and lower beam velocities than inside them. We characterize these apparently self-organizing structures through the interplay between wave- and beam properties and present the microphysical mechanisms involved in their creation.

Exciton dynamics of C60-based single-photon emitters explored by Hanbury Brown-Twiss scanning tunnelling microscopy.

PubMed

Merino, P; Große, C; Rosławska, A; Kuhnke, K; Kern, K

2015-09-29

Exciton creation and annihilation by charges are crucial processes for technologies relying on charge-exciton-photon conversion. Improvement of organic light sources or dye-sensitized solar cells requires methods to address exciton dynamics at the molecular scale. Near-field techniques have been instrumental for this purpose; however, characterizing exciton recombination with molecular resolution remained a challenge. Here, we study exciton dynamics by using scanning tunnelling microscopy to inject current with sub-molecular precision and Hanbury Brown-Twiss interferometry to measure photon correlations in the far-field electroluminescence. Controlled injection allows us to generate excitons in solid C60 and let them interact with charges during their lifetime. We demonstrate electrically driven single-photon emission from localized structural defects and determine exciton lifetimes in the picosecond range. Monitoring lifetime shortening and luminescence saturation for increasing carrier injection rates provides access to charge-exciton annihilation dynamics. Our approach introduces a unique way to study single quasi-particle dynamics on the ultimate molecular scale.

Rate Change Graph Technology: Absolute Value Point Methodology

NASA Astrophysics Data System (ADS)

Strickland, Ken; Duvernois, Michael

2011-10-01

Absolute Value Point Methodology (AVPM) is a new theoretical tool for science research centered on Rate Change Graph Technology (RCGT). The modeling techniques of AVPM surpass conventional methods by extending the geometrical rules of mathematics. Exact geometrical structures of matter and energy become clearer revealing new ways to compile advanced data. RCGT mechanics is realized from geometrical intersections that are the result of plotting changing value vs. changing geometry. RCGT methods ignore size and value to perform an objective analysis in geometry. Value and size are then re-introduced back into the analytical system for a clear and concise solution. Available AVPM applications reveal that a massive amount of data from the Big Bang to vast super-clusters is untouched by human thought. Once scientists learn to design tools from RCGT Mechanics, new and formidable approaches to experimentation and theory may lead to new discoveries. In the creation of AVPM, it has become apparent there is a particle-world that exists between strings and our familiar universe. These unrealized particles in their own nature exhibit inflation like properties and may be the progenitor of the implements of our universe. Thus space, time, energy, motion, space-time and gravity are born from its existence and decay. This announcement will be the beginning of many new ideas from the study of RCGT mechanics.

Dynamic formation of single-atom catalytic active sites on ceria-supported gold nanoparticles

DOE PAGES

Wang, Yanggang; Mei, Donghai; Glezakou, Vassiliki Alexandra; ...

2015-03-04

Ab initio Molecular Dynamics simulations and static Density Functional Theory calculations have been performed to investigate the reaction mechanism of CO oxidation on Au/CeO 2 catalyst. It is found that under reaction condition CO adsorption significantly labializes the surface atoms of the Au cluster and leads to the formation of isolated Au+-CO species that resides on the support in the vicinity of the Au particle. In this context, we identified a dynamic single-atom catalytic mechanism at the interfacial area for CO oxidation on Au/CeO 2 catalyst, which is a lower energy pathway than that of CO oxidation at the interfacemore » with the metal particle. This results from the ability of the single atom site to strongly couple with the redox properties of the support in a synergistic manner thereby lowering the barrier for redox reactions. We find that the single Au+ ion, which only exists under reaction conditions, breaks away from the Au cluster to catalyze CO oxidation and returns to the Au cluster after the catalytic cycle is completed. Generally, our study highlights the importance of the dynamic creation of active sites under reaction conditions and their essential role in a catalytic process.« less

Optical-vortex pair creation and annihilation and helical astigmatism of a nonplanar ring resonator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heckenberg, N.R.; Vaupel, M.; Malos, J.T.

1996-09-01

The creation and annihilation of pairs of optical vortices have been studied in transitions between patterns produced in a photorefractive oscillator. Smooth metamorphosis between stable patterns occurs through pair creation or annihilation but can be modeled using superposition of modes taking into account lifting of degeneracy of helical modes by helical astigmatism of the resonator. {copyright} {ital 1996 The American Physical Society.}

Middle-term results of trans-catheter creation of atrial communication in patients receiving mechanical circulatory support.

PubMed

O'Byrne, Michael L; Glatz, Andrew C; Rossano, Joseph W; Schiavo, Kellie L; Dori, Yoav; Rome, Jonathan J; Gillespie, Matthew J

2015-06-01

To describe our center's middle-term outcomes following trans-catheter creation of atrial communication (ASD) in patients on mechanical circulatory support. Trans-catheter creation of an ASD in patients on mechanical circulatory support is an adjuvant therapy to reduce left atrial pressure and associated morbidity. Data on middle term outcomes following this procedure, specifically in regards to the fate of the ASD, are limited. Retrospective observational study of consecutive children and adults undergoing trans-catheter creation of an atrial septal communication between 1/1/2006 and 5/1/2014, reviewing their baseline characteristics, procedural details, and data from follow-up. Over the study period, 37/227 (16%) subjects undergoing veno-arterial extra-corporeal membrane oxygenation (VA-ECMO) underwent trans-catheter creation of an atrial communication. Mortality on VA-ECMO support in this subgroup was 19%, with an additional 24% transitioning to ventricular assist device. Of the 57% who survived to separation from VA-ECMO, 16/21 (76%) had residual atrial communications. 56% of these underwent closure procedures. Following trans-catheter creation of ASD, a residual ASD is present in the majority of assessable survivors and represents a potential volume overload and/or right to left shunt that may need to be addressed. © 2015 Wiley Periodicals, Inc.

From research to evidence-informed decision making: a systematic approach

PubMed Central

Poot, Charlotte C; van der Kleij, Rianne M; Brakema, Evelyn A; Vermond, Debbie; Williams, Siân; Cragg, Liza; van den Broek, Jos M; Chavannes, Niels H

2018-01-01

Abstract Background Knowledge creation forms an integral part of the knowledge-to-action framework aimed at bridging the gap between research and evidence-informed decision making. Although principles of science communication, data visualisation and user-centred design largely impact the effectiveness of communication, their role in knowledge creation is still limited. Hence, this article aims to provide researchers a systematic approach on how knowledge creation can be put into practice. Methods A systematic two-phased approach towards knowledge creation was formulated and executed. First, during a preparation phase the purpose and audience of the knowledge were defined. Subsequently, a developmental phase facilitated how the content is ‘said’ (language) and communicated (channel). This developmental phase proceeded via two pathways: a translational cycle and design cycle, during which core translational and design components were incorporated. The entire approach was demonstrated by a case study. Results The case study demonstrated how the phases in this systematic approach can be operationalised. It furthermore illustrated how created knowledge can be delivered. Conclusion The proposed approach offers researchers a systematic, practical and easy-to-implement tool to facilitate effective knowledge creation towards decision-makers in healthcare. Through the integration of core components of knowledge creation evidence-informed decision making will ultimately be optimized. PMID:29538728

Comparison of post-creation procedures and costs between surgical and an endovascular approach to arteriovenous fistula creation.

PubMed

Yang, Shuo; Lok, Charmaine; Arnold, Renee; Rajan, Dheeraj; Glickman, Marc

2017-03-28

Due to early and late failures that may occur with surgically created hemodialysis arteriovenous fistulas (SAVF), post-creation procedures are commonly required to facilitate AVF maturation and maintain patency. This study compared AVF post-creation procedures and their associated costs in patients with SAVF to patients with a new endovascularly created AVF (endoAVF). A 5% random sample from Medicare Standard Analytical Files was abstracted to determine post-creation procedures and associated costs for SAVF created from 2011 to 2013. Medicare enrollment during the 6 months prior to and after the AVF creation was required. Patients' follow-up inpatient, outpatient, and physician claims were used to identify post-creation procedures and to estimate average procedure costs. Comparative procedural information on endoAVF was obtained from the Novel Endovascular Access Trial (NEAT). Of 3764 Medicare SAVF patients, 60 successfully matched to endoAVF patients using 1:1 propensity score matching of baseline demographic and clinical characteristics. The total post-creation procedural event rate within 1 year was lower for endoAVF patients (0.59 per patient-year) compared to the matched SAVF cohort (3.43 per patient-year; p<0.05). In the endoAVF cohort, event rates of angioplasty, thrombectomy, revision, catheter placement, subsequent arteriovenous graft (AVG), new SAVF, and vascular access-related infection were all significantly lower than in the SAVF cohort. The average first year cost per patient-year associated with post-creation procedures was estimated at US$11,240 USD lower for endoAVF than for SAVF. Compared to patients with SAVF, patients with endoAVF required fewer post-creation procedures and had lower associated mean costs within the first year.

Proton: The Particle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suit, Herman

The purpose of this article is to review briefly the nature of protons: creation at the Big Bang, abundance, physical characteristics, internal components, and life span. Several particle discoveries by proton as the experimental tool are considered. Protons play important roles in science, medicine, and industry. This article was prompted by my experience in the curative treatment of cancer patients by protons and my interest in the nature of protons as particles. The latter has been stimulated by many discussions with particle physicists and reading related books and journals. Protons in our universe number ≈10{sup 80}. Protons were created atmore » 10{sup −6} –1 second after the Big Bang at ≈1.37 × 10{sup 10} years beforethe present. Proton life span has been experimentally determined to be ≥10{sup 34} years; that is, the age of the universe is 10{sup −24}th of the minimum life span of a proton. The abundance of the elements is hydrogen, ≈74%; helium, ≈24%; and heavier atoms, ≈2%. Accordingly, protons are the dominant baryonic subatomic particle in the universe because ≈87% are protons. They are in each atom in our universe and thus involved in virtually every activity of matter in the visible universe, including life on our planet. Protons were discovered in 1919. In 1968, they were determined to be composed of even smaller particles, principally quarks and gluons. Protons have been the experimental tool in the discoveries of quarks (charm, bottom, and top), bosons (W{sup +}, W{sup −}, Z{sup 0}, and Higgs), antiprotons, and antineutrons. Industrial applications of protons are numerous and important. Additionally, protons are well appreciated in medicine for their role in radiation oncology and in magnetic resonance imaging. Protons are the dominant baryonic subatomic particle in the visible universe, comprising ≈87% of the particle mass. They are present in each atom of our universe and thus a participant in every activity involving matter.« less

Proton: the particle.

PubMed

Suit, Herman

2013-11-01

The purpose of this article is to review briefly the nature of protons: creation at the Big Bang, abundance, physical characteristics, internal components, and life span. Several particle discoveries by proton as the experimental tool are considered. Protons play important roles in science, medicine, and industry. This article was prompted by my experience in the curative treatment of cancer patients by protons and my interest in the nature of protons as particles. The latter has been stimulated by many discussions with particle physicists and reading related books and journals. Protons in our universe number ≈10(80). Protons were created at 10(-6) -1 second after the Big Bang at ≈1.37 × 10(10) years beforethe present. Proton life span has been experimentally determined to be ≥10(34) years; that is, the age of the universe is 10(-24)th of the minimum life span of a proton. The abundance of the elements is hydrogen, ≈74%; helium, ≈24%; and heavier atoms, ≈2%. Accordingly, protons are the dominant baryonic subatomic particle in the universe because ≈87% are protons. They are in each atom in our universe and thus involved in virtually every activity of matter in the visible universe, including life on our planet. Protons were discovered in 1919. In 1968, they were determined to be composed of even smaller particles, principally quarks and gluons. Protons have been the experimental tool in the discoveries of quarks (charm, bottom, and top), bosons (W(+), W(-), Z(0), and Higgs), antiprotons, and antineutrons. Industrial applications of protons are numerous and important. Additionally, protons are well appreciated in medicine for their role in radiation oncology and in magnetic resonance imaging. Protons are the dominant baryonic subatomic particle in the visible universe, comprising ≈87% of the particle mass. They are present in each atom of our universe and thus a participant in every activity involving matter. Copyright © 2013 Elsevier Inc. All rights reserved.

The Library Web: Case Studies in Web Site Creation and Implementation.

ERIC Educational Resources Information Center

Still, Julie M., Ed.

This book presents 19 case studies in library web site creation and implementation. The book begins with an introduction--"Introduction: Step into My Parlor" (Julie M. Still)--and is divided into three sections. The first section, Academic Library Web Sites, contains six case studies: "U-SEARCH: The University of Saskatchewan…

Quons, an interpolation between Bose and Fermi oscillators

NASA Technical Reports Server (NTRS)

Greenberg, O. W.

1993-01-01

After a brief mention of Bose and Fermi oscillators and of particles which obey other types of statistics, including intermediate statistics, parastatistics, paronic statistics, anyon statistics, and infinite statistics, I discuss the statistics of 'quons' (pronounced to rhyme with muons), particles whose annihilation and creation operators obey the q-deformed commutation relation (the quon algebra or q-mutator) which interpolates between fermions and bosons. I emphasize that the operator for interaction with an external source must be an effective Bose operator in all cases. To accomplish this for parabose, parafermi and quon operators, I introduce parabose, parafermi, and quon Grassmann numbers, respectively. I also discuss interactions of non-relativistic quons, quantization of quon fields with antiparticles, calculation of vacuum matrix elements of relativistic quon fields, demonstration of the TCP theorem, cluster decomposition, and Wick's theorem for relativistic quon fields, and the failure of local commutativity of observables for relativistic quon fields. I conclude with the bound on the parameter q for electrons due to the Ramberg-Snow experiment.

The discovery and measurements of a Higgs boson.

PubMed

Gianotti, F; Virdee, T S

2015-01-13

In July 2012, the ATLAS and CMS collaborations at CERN's Large Hadron Collider announced the discovery of a Higgs-like boson, a new heavy particle at a mass more than 130 times the mass of a proton. Since then, further data have revealed its properties to be strikingly similar to those of the Standard Model Higgs boson, a particle expected from the mechanism introduced almost 50 years ago by six theoreticians including British physicists Peter Higgs from Edinburgh University and Tom Kibble from Imperial College London. The discovery is the culmination of a truly remarkable scientific journey and undoubtedly the most significant scientific discovery of the twenty-first century so far. Its experimental confirmation turned out to be a monumental task requiring the creation of an accelerator and experiments of unprecedented capability and complexity, designed to discern the signatures that correspond to the Higgs boson. Thousands of scientists and engineers, in each of the ATLAS and CMS teams, came together from all four corners of the world to make this massive discovery possible.

Emulsion design to improve the delivery of functional lipophilic components.

PubMed

McClements, David Julian

2010-01-01

The food industry has used emulsion science and technology for many years to create a diverse range of food products, such as milk, cream, soft drinks, nutritional beverages, dressings, mayonnaise, sauces, dips, deserts, ice cream, margarine, and butter. The majority of these food products are conventional oil-in-water (O/W) or water-in-oil (W/O) type emulsions. Recently, there has been increasing interest within the food industry in either improving or extending the functional performance of foods using novel structured emulsions. This article reviews recent developments in the creation of structured emulsions that could be used by the food and other industries, including nanoemulsions, multiple emulsions, multilayer emulsions, solid lipid particles, and filled hydrogel particles. These structured emulsions can be produced from food-grade [generally recognized as safe (GRAS)] ingredients (e.g., lipids, proteins, polysaccharides, surfactants, and minerals), using simple processing operations (e.g., mixing, homogenizing, and thermal processing). The structure, production, performance, and potential applications of each type of structured emulsion system are discussed.

Investigation of Structure of Gd and Tb Nuclei using STARS and LiBerACE

NASA Astrophysics Data System (ADS)

Bonniwell, Cain; Pauerstein, Ben; Allmond, J. M.; Beausang, C. W.

2009-10-01

This experiment, performed at Livermore Berkeley National Lab as a collaboration of Livermore, Berkeley, and the University of Richmond, was designed to investigate the structure of gadolinium and terbium nuclei using the P + 156Gd reaction at E beam = 27 MeV. The experimental design included use of the STARS system for detecting charged particles as well as the LiBerACE clover array for detecting gamma rays. The master gate was set to record particle-gamma as well as gamma-gamma coincidences. The data is currently being analyzed using the RADWARE escl8r software package which has allowed the creation of extensive level schemes for several Gd and Tb nuclei. So far the data suggests new gamma ray transitions as well as new energy states in 154Gd and 155Tb. The project is ongoing, and the results will be presented. This work was supported by the US Department of Energy under grant numbers DE-FG52NA26206 and DE-FG02-05ER41379.

Solitosynthesis: Cosmological evolution of non-topological solitons

NASA Technical Reports Server (NTRS)

Griest, Kim; Kolb, Edward W.

1989-01-01

The thermal creation, fusion, evaporation, and destruction of non-topological solitons (NTS) after a phase transition in the early universe is considered. By defining and following NTS statistical equilibrium and departures from it, and depending on particle physics parameters, one of three possible scenarios occurs. If reaction rates are high enough, a period of equilibrium occurs and relic abundances are determined by the freeze-out temperature. Equilibrium first drives most NTS's into their constituents (free phi particles) and then causes rapid fusion into large NTS's. If freeze-out occurs during the first phase, the NTS's are almost entirely destroyed, while if it occurs during the second phase, solitosynthesis occurs and NTS's may be cosmically relevant. For slow reaction rates the NTS's are born frozen out and have the abundance determined by the phase transition. Analytic approximations for determining the abundances are developed, and tested by numerically integrating a reaction network in an expanding universe. Unfortunately, for most of the parameter space considered, solito-destruction/evaporation occurs.

Three-dimensional structure and multistable optical switching of triple-twisted particle-like excitations in anisotropic fluids.

PubMed

Smalyukh, Ivan I; Lansac, Yves; Clark, Noel A; Trivedi, Rahul P

2010-02-01

Control of structures in soft materials with long-range order forms the basis for applications such as displays, liquid-crystal biosensors, tunable lenses, distributed feedback lasers, muscle-like actuators and beam-steering devices. Bistable, tristable and multistable switching of well-defined structures of molecular alignment is of special interest for all of these applications. Here we describe the facile optical creation and multistable switching of localized configurations in the molecular orientation field of a chiral nematic anisotropic fluid. These localized chiro-elastic particle-like excitations--dubbed 'triple-twist torons'--are generated by vortex laser beams and embed the localized three-dimensional (3D) twist into a uniform background. Confocal polarizing microscopy and computer simulations reveal their equilibrium internal structures, manifesting both skyrmion-like and Hopf fibration features. Robust generation of torons at predetermined locations combined with both optical and electrical reversible switching can lead to new ways of multistable structuring of complex photonic architectures in soft materials.

Respiratory disease and particulate air pollution in Santiago Chile: contribution of erosion particles from fine sediments.

PubMed

Garcia-Chevesich, Pablo A; Alvarado, Sergio; Neary, Daniel G; Valdes, Rodrigo; Valdes, Juan; Aguirre, Juan José; Mena, Marcelo; Pizarro, Roberto; Jofré, Paola; Vera, Mauricio; Olivares, Claudio

2014-04-01

Air pollution in Santiago is a serious problem every winter, causing thousands of cases of breathing problems within the population. With more than 6 million people and almost two million vehicles, this large city receives rainfall only during winters. Depending on the frequency of storms, statistics show that every time it rains, air quality improves for a couple of days, followed by extreme levels of air pollution. Current regulations focus mostly on PM10 and PM2.5, due to its strong influence on respiratory diseases. Though more than 50% of the ambient PM10s in Santiago is represented by soil particles, most of the efforts have been focused on the remaining 50%, i.e. particulate material originating from fossil and wood fuel combustion, among others. This document emphasizes the need for the creation of erosion/sediment control regulations in Chile, to decrease respiratory diseases on Chilean polluted cities. Copyright © 2014 Elsevier Ltd. All rights reserved.

Dual Neutral Particle Beam Interrogation of Intermodal Shipping Containers for Special Nuclear Material

NASA Astrophysics Data System (ADS)

Keith, Rodney Lyman

Intermodal shipping containers entering the United States provide an avenue to smuggle unsecured or stolen special nuclear material (SNM). The only direct method fielded to indicate the presence of SNM is by passive photon/neutron radiation detection. Active interrogation using neutral particle beams to induce fission in SNM is a method under consideration. One by-product of fission is the creation of fragments that undergo radioactive decay over a time period on the order of tens of seconds after the initial event. The "delayed" gamma-rays emitted from these fragments over this period are considered a hallmark for the presence of SNM. A fundamental model is developed using homogenized cargos with a SNM target embedded at the center and computationally interrogated using simultaneous neutron and photon beams. Findings from analysis of the delayed gamma emissions from these experiments are intended to mitigate the effects of poor quality information about the composition and disposition of suspect cargo before examination in an active interrogation portal.

Tertiary particle physics with ELI: from challenge to chance (Conference Presentation)

NASA Astrophysics Data System (ADS)

Drska, Ladislav

2017-05-01

nteraction of high-intensity laser pulses with solid state targets results in generation of intense pulses of secondary particles via electromagnetic interaction : electrons, ions, hard x-rays. The beams of these particles can be used to produce various types of third-generation particles, beyond electromagnetic also other types of fundamental interactions can be involved in this process [1]. As the most interesting tertiary particles could be mentioned positrons, neutron, muons. This paper shall extend our previous analysis of this topic [2]: it discusses selected technical problems of design and realization of applicable sources of these particles and presents some more elaborated proposals for potential meaningful / hopefuly realistic exploitations of this technology. (1)Tertiary Sources (TS) : First Development Steps. This part of the presentation includes the topics as follows: (11) Pulsed positron sources: Verified solutions of laser-driven positron sources [3] [4] [5], development towards applicable facilities. Some unconventional concepts of application of lasers for positron production [6]. Techniques for realization of low/very-low energy positrons. (12) Taylored neutron sources [7]: Neutron sources with demanded space distribution, strongly beamed and isotropic solutions [8] [9]. Neutron generation with taylored energy distribution. Problem of the direct production of neutrons with very low energy [10] [11]. (13) Potential muon sources: Proof-of-principle laser experiment on electron / photon driven muon production [12] [13]. Study of the possibility of effective generation of surface muons. Problems of the production of muons with very low energy. (2) Fundamental & Applied Physics with TS: This part of the talk presents the themes: (21) Diagnostic potential of TS: Lepton emission as a signature of processes in extreme systems. Passive and active diagnostics using positrons, problems of detection and evaluation. Potential diagnostic applications of muons. Concrete application study: muon tomography. (22) Antilepton gravity studies [14]: Possibility of antimattter gravity research using positronium and muonium [15] [16]. Lepton / antilepton gravity studiesactive with relativistic particle beams [17]. First-phase practical application : positron production for filling (commertial) particle traps, development base for multiple microtrap systems. (23) Hidden world searching [18] : Potential laser-based production / detection of selected dark mattter particles - axions, hidden photons [19] [20]. Search for hidden particles in nuclear decay processes [21]. Potential application output: intense positronium source. Conclusion: The extensive feasibility study confirms the potential of ELI to contribute to the solution of Grand Challenge Problems of physics. Laser-produced tertiary particles will play important role in this effort. : References [1] L.Drska et al.: Physics of Extreme Systems. Course ATHENS CTU18, Prague 12 - 19 Nov., 2016. http://vega.fjfi.cvut.cz/docs/athens2016/ [2] L.Drska : Lepton Diagnostics and Antimatter Physics. In: SPIE Optics+Optoelectronics, Prague, April 13 - 16, 2015 . [3] H. Chen et al.: Scaling the Yield of Laser-Driven Electron-Positron Jets to Laboratory Astrophysics Applications. Rep. LLNL-JRNL-665381, Dec. 11, 2014. [4] E Liang et al.: High e+ / e- Ratio Dense Pair Creation with 1022 W.cm-2 Laser Irradiating Solid Targets. Scientific Reports, Sept. 14, 2015. www.nature.com/scientificreports [5] G. Sarri et al.: Spectral and Spatial Characterization of Laser-driven Positron Beams. Plasma Phys. Control. Fusion 59 (2017) 014015. [6] B. Schoch: A Method to Produce Intense Positron Beams via Electro Pair Production on Electrons. arXiv:1607.03847v1 [physics.acc-ph] [7] I. Pomerantz: Laser Generation of Neutrons: Science and Applications. In: ELI-NP Summer School, Magurele, Sept. 21 - 25, 2015. http://www.eli-np.ro/2015-summer-school/presentations/23.09/Pomerantz_Eli-NP-Summer-school-2015.pdf [8] V.P. Kovalev: Secondary Radiation of Electron Accelerators (in Russian). Atomizdat 1969. [9] M. Lebois et al.: Development of a Kinematically Focused Neutron Source with p(Li7,n)Be7 Inverse Reaction. Nucl. Instr. Meth. Phys. Res. A 735 (2014), 145. [10] D. Habs et al.: Neutron Halo Isomers in Stable Nuclei and their Possible Application for the Production of Low Energy, Pulsed, Polarized Neutron Beams of High Intensity and High Brilliance. Appl. Phys B103 (2011),485. [11] T. Masuda et al.: A New Method of Creating High/Intensity Neutron Source. arXiv:1604.02818v1[nucl-ex] [12] A.I. Titov et al.: Dimuon Production by Laser-wakefield Accelerated Electrons. Phys. Rev. ST Accel. Beams 12 (2009) 111301. [13] W. Dreesen et al.: Detection of Petawatt Laser-Induced Muon Source for Rapid High-Gamma Material Detection. DOE/NV/25946-2262. [14] F. Castelli: Positronium and Fundamental Physics: What Next ? In: What Next, Florence 2015. [15] G. Dufour et al. : Prospects for Studies of the Free Fall and Gravitation Quantum States of Antimatter. Advances in High Energy Physics 2015 (2015) 379642. [16] D.M. Kaplan et al.. Antimatter Gravity with Muonium. IIT-CAPP-16-1. arXiv:1601.07222v2 [physics.ins-det] [17] T. Kalaydzhyan: Gravitational Mass of Positron from LEP Synchrotron Losses. arXiv:1508.04377v3 [hep-ph] [18] J. Alexander et al.: Dark Sector 2016 Workshop: Community Report. arXiv:1608.08632[hep-ph] [19] M.A. Wahud et al.: Axion-like Particle Production in a Laser-Induced Dynamical Spacertime. arXiv:1612.07743v1 [hep-ph] [20] V. Kozhuharov et al: New Projects on Dark Photon Search. arXiv:1610.04389v1 [hep-ex] [21] A.J. Krasznahorkay et al.: Observation of Anomalous Internal Pair Creation in Be8: A Possible Signature of a Light, Neutral Boson. arXiv:1504.01527v1 [nucl-ex

[The anthropic principle in biology and radiobiology].

PubMed

Akif'ev, A P; Degtiarev, S V

1999-01-01

In accordance with the anthropic principle of the Universe the physical constants of fundamental particles of matter and the laws of their counteraction are those that an appearance of man and mind becomes possible and necessary. It is suggested to add some biological constants to the set of fundamental constants. With reparation of DNA as an example it was shown how a cell ran some parameters of Watson-Crick double helix. It was pointed that the concept of the anthropic principle of the Universe in its full body including biological constants is a key to developing of a unified theory of evolution of the Universe within the limits of scientific creationism.

Rapid recipe formulation for plasma etching of new materials

NASA Astrophysics Data System (ADS)

Chopra, Meghali; Zhang, Zizhuo; Ekerdt, John; Bonnecaze, Roger T.

2016-03-01

A fast and inexpensive scheme for etch rate prediction using flexible continuum models and Bayesian statistics is demonstrated. Bulk etch rates of MgO are predicted using a steady-state model with volume-averaged plasma parameters and classical Langmuir surface kinetics. Plasma particle and surface kinetics are modeled within a global plasma framework using single component Metropolis Hastings methods and limited data. The accuracy of these predictions is evaluated with synthetic and experimental etch rate data for magnesium oxide in an ICP-RIE system. This approach is compared and superior to factorial models generated from JMP, a software package frequently employed for recipe creation and optimization.

Ostomy creation with fewer sutures using tissue adhesives (cyanoacrylates) in inflammatory bowel disease: a pilot study.

PubMed

Uchino, M; Ikeuchi, H; Bando, T; Sasaki, H; Chohno, T; Horio, Y; Takesue, Y

2018-03-01

Introduction Fistula formation around the ostomy site is a stoma-related complication often requiring surgical intervention. This complication may be caused by sutures or may develop as a complication of inflammatory bowel disease. Before conducting a clinical trial, we set out to investigate the safety of ostomy creation with fewer sutures using tissue adhesives in this pilot study. Methods Patients with inflammatory bowel disease who required surgery with ostomy creation at the Hyogo College of Medicine between January 2014 and December 2015 were enrolled. Safety was assessed by evaluating the incidence of stoma-related complications. Ostomy was restricted to loop ileostomy and was created with two sutures and tissue adhesives. Results A total of 14 patients were enrolled. Mean body mass index was 18.9 ± 2.0 kg/m 2 . There were no cases of ostomy retraction and no severe adverse events were observed. Conclusions This pilot study demonstrates that ostomy creation using tissue adhesives is safe. Although retraction and adverse events were not observed, even in patients with inflammatory bowel disease who generally exhibit delayed wound healing, the body mass index was extremely low in this series. This study does not strongly recommend ostomy creation with tissue adhesives; further studies are needed to clarify the efficacy and safety of the procedure.

Interrelating the breakage and composition of mined and drill core coal

NASA Astrophysics Data System (ADS)

Wilson, Terril Edward

Particle size distribution of coal is important if the coal is to be beneficiated, or if a coal sales contract includes particle size specifications. An exploration bore core sample of coal ought to be reduced from its original cylindrical form to a particle size distribution and particle composition that reflects, insofar as possible, a process stream of raw coal it represents. Often, coal cores are reduced with a laboratory crushing machine, the product of which does not match the raw coal size distribution. This study proceeds from work in coal bore core reduction by Australian investigators. In this study, as differentiated from the Australian work, drop-shatter impact breakage followed by dry batch tumbling in steel cylinder rotated about its transverse axis are employed to characterize the core material in terms of first-order and zeroth-order breakage rate constants, which are indices of the propensity of the coal to degrade during excavation and handling. Initial drop-shatter and dry tumbling calibrations were done with synthetic cores composed of controlled low-strength concrete incorporating fly ash (as a partial substitute for Portland cement) in order to reduce material variables and conserve difficult-to-obtain coal cores. Cores of three different coalbeds--Illinois No. 6, Upper Freeport, and Pocahontas No. 5 were subjected to drop-shatter and dry batch tumbling tests to determine breakage response. First-order breakage, characterized by a first-order breakage index for each coal, occurred in the drop-shatter tests. First- and zeroth-order breakage occurred in dry batch tumbling; disappearance of coarse particles and creation of fine particles occurred in a systematic way that could be represented mathematically. Certain of the coal cores available for testing were dry and friable. Comparison of coal preparation plant feed with a crushed bore core and a bore core prepared by drop-shatter and tumbling (all from the same Illinois No.6 coal mining property) indicated that the size distribution and size fraction composition of the drop-shattered/tumbled core more closely resembled the plant feed than the crushed core. An attempt to determine breakage parameters (to allow use of selection and breakage functions and population balance models in the description of bore core size reduction) was initiated. Rank determination of the three coal types was done, indicating that higher rank associates with higher breakage propensity. The two step procedure of drop-shatter and dry batch tumbling simulates the first-order (volume breakage) and zeroth-order (abrasion of particle surfaces) that occur in excavation and handling operations, and is appropriate for drill core reduction prior to laboratory analysis.

Global analysis of exon creation versus loss and the role of alternative splicing in 17 vertebrate genomes

PubMed Central

Alekseyenko, Alexander V.; Kim, Namshin; Lee, Christopher J.

2007-01-01

Association of alternative splicing (AS) with accelerated rates of exon evolution in some organisms has recently aroused widespread interest in its role in evolution of eukaryotic gene structure. Previous studies were limited to analysis of exon creation or lost events in mouse and/or human only. Our multigenome approach provides a way for (1) distinguishing creation and loss events on the large scale; (2) uncovering details of the evolutionary mechanisms involved; (3) estimating the corresponding rates over a wide range of evolutionary times and organisms; and (4) assessing the impact of AS on those evolutionary rates. We use previously unpublished independent analyses of alternative splicing in five species (human, mouse, dog, cow, and zebrafish) from the ASAP database combined with genomewide multiple alignment of 17 genomes to analyze exon creation and loss of both constitutively and alternatively spliced exons in mammals, fish, and birds. Our analysis provides a comprehensive database of exon creation and loss events over 360 million years of vertebrate evolution, including tens of thousands of alternative and constitutive exons. We find that exon inclusion level is inversely related to the rate of exon creation. In addition, we provide a detailed in-depth analysis of mechanisms of exon creation and loss, which suggests that a large fraction of nonrepetitive created exons are results of ab initio creation from purely intronic sequences. Our data indicate an important role for alternative splicing in creation of new exons and provide a useful novel database resource for future genome evolution research. PMID:17369312

Coupled SPH-FV method with net vorticity and mass transfer

NASA Astrophysics Data System (ADS)

Chiron, L.; Marrone, S.; Di Mascio, A.; Le Touzé, D.

2018-07-01

Recently, an algorithm for coupling a Finite Volume (FV) method, that discretize the Navier-Stokes equations on block structured Eulerian grids, with the weakly-compressible Lagrangian Smoothed Particle Hydrodynamics (SPH) was presented in [16]. The algorithm takes advantage of the SPH method to discretize flow regions close to free-surfaces and of the FV method to resolve the bulk flow and the wall regions. The continuity between the two solutions is guaranteed by overlapping zones. Here we extend the algorithm by adding the possibility to have: 1) net mass transfer between the SPH and FV sub-domains; 2) free-surface across the overlapping region. In this context, particle generation at common boundaries is required to prevent depletion or clustering of particles. This operation is not trivial, because consistency between the Lagrangian and Eulerian description of the flow must be retained to ensure mass conservation. We propose here a new coupling paradigm that extends the algorithm developed in [16] and renders it suitable to test cases where vorticity and free surface significantly pass from one domain to the other. On the SPH side, a novel technique for the creation/deletion of particle was developed. On the FV side, the information recovered from the SPH solver are exploited to improve free surface prediction in a fashion that resemble the Particle Level-Set algorithms. The combination of the two new features was tested and validated in a number of test cases where both vorticity and front evolution are important. Convergence and robustness of the algorithm are shown.

Demonstration of the hollow channel plasma wakefield accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gessner, Spencer J.

2016-09-17

A plasma wakefield accelerator is a device that converts the energy of a relativistic particle beam into a large-amplitude wave in a plasma. The plasma wave, or wakefield, supports an enormous electricfield that is used to accelerate a trailing particle beam. The plasma wakefield accelerator can therefore be used as a transformer, transferring energy from a high-charge, low-energy particle beam into a high-energy, low-charge particle beam. This technique may lead to a new generation of ultra-compact, high-energy particle accelerators. The past decade has seen enormous progress in the field of plasma wakefield acceleration with experimental demonstrations of the acceleration ofmore » electron beams by several gigaelectron-volts. The acceleration of positron beams in plasma is more challenging, but also necessary for the creation of a high-energy electron-positron collider. Part of the challenge is that the plasma responds asymmetrically to electrons and positrons, leading to increased disruption of the positron beam. One solution to this problem, first proposed over twenty years ago, is to use a hollow channel plasma which symmetrizes the response of the plasma to beams of positive and negative charge, making it possible to accelerate positrons in plasma without disruption. In this thesis, we describe the theory relevant to our experiment and derive new results when needed. We discuss the development and implementation of special optical devices used to create long plasma channels. We demonstrate for the first time the generation of meter-scale plasma channels and the acceleration of positron beams therein.« less

Strengthening the reliability and credibility of observational epidemiology studies by creating an Observational Studies Register.

PubMed

Swaen, Gerard M H; Carmichael, Neil; Doe, John

2011-05-01

To evaluate the need for the creation of a system in which observational epidemiology studies are registered; an Observational Studies Register (OSR). The current scientific process for observational epidemiology studies is described. Next, a parallel is made with the clinical trials area, where the creation of clinical trial registers has greatly restored and improved their credibility and reliability. Next, the advantages and disadvantages of an OSR are compared. The advantages of an OSR outweigh its disadvantages. The creation of an OSR, similar to the existing Clinical Trials Registers, will improve the assessment of publication bias and will provide an opportunity to compare the original study protocol with the results reported in the publication. Reliability, credibility, and transparency of observational epidemiology studies are strengthened by the creation of an OSR. We propose a structured, collaborative, and coordinated approach for observational epidemiology studies that can provide solutions for existing weaknesses and will strengthen credibility and reliability, similar to the approach currently used in clinical trials, where Clinical Trials Registers have played a key role in strengthening their scientific value. Copyright © 2011 Elsevier Inc. All rights reserved.

Promoting Knowledge Creation Discourse in an Asian Primary Five Classroom: Results from an inquiry into life cycles

NASA Astrophysics Data System (ADS)

van Aalst, Jan; Sioux Truong, Mya

2011-03-01

The phrase 'knowledge creation' refers to the practices by which a community advances its collective knowledge. Experience with a model of knowledge creation could help students to learn about the nature of science. This research examined how much progress a teacher and 16 Primary Five (Grade 4) students in the International Baccalaureate Primary Years Programme could make towards the discourse needed for Bereiter and Scardamalia's model of knowledge creation. The study consisted of two phases: a five-month period focusing on the development of the classroom ethos and skills needed for this model (Phase 1), followed by a two-month inquiry into life cycles (Phase 2). In Phase 1, we examined the classroom practices that are thought to support knowledge creation and the early experiences of the students with a web-based inquiry environment, Knowledge Forum®. In Phase 2, we conducted a summative evaluation of the students' work in Knowledge Forum in the light of the model. The data sources included classroom video recordings, artefacts of the in-class work, the Knowledge Forum database, a science content test, questionnaires, and interviews. The findings indicate that the students made substantial progress towards the knowledge creation discourse, particularly regarding the social structure of this kind of discourse and, to a lesser extent, its idea-centred nature. They also made acceptable advances in scientific knowledge and appeared to enjoy this way of learning. The study provides one of the first accounts in the literature of how a teacher new to the knowledge creation model enacted it in an Asian primary classroom.

Effects of Colony Creation Method and Beekeeper Education on Honeybee ("Apis mellifera") Mortality

ERIC Educational Resources Information Center

Findlay, J. Reed; Eborn, Benjamin; Jones, Wayne

2015-01-01

The two-part study reported here analyzed the effects of beekeeper education and colony creation methods on colony mortality. The first study examined the difference in hive mortality between hives managed by beekeepers who had received formal training in beekeeping with beekeepers who had not. The second study examined the effect on hive…

SCEW: a Microsoft Excel add-in for easy creation of survival curves.

PubMed

Khan, Haseeb Ahmad

2006-07-01

Survival curves are frequently used for reporting survival or mortality outcomes of experimental pharmacological/toxicological studies and of clinical trials. Microsoft Excel is a simple and widely used tool for creation of numerous types of graphic presentations however it is difficult to create step-wise survival curves in Excel. Considering the familiarity of clinicians and biomedical scientists with Excel, an algorithm survival curves in Excel worksheet (SCEW) has been developed for easy creation of survival curves directly in Excel worksheets. The algorithm has been integrated in the form of Excel add-in for easy installation and usage. The program is based on modification of frequency data for binary break-up using the spreadsheet formula functions whereas a macro subroutine automates the creation of survival curves. The advantages of this program are simple data input, minimal procedural steps and the creation of survival curves in the familiar confines of Excel.

Pair creation of higher dimensional black holes on a de Sitter background

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dias, Oscar J.C.; Lemos, Jose P.S.; CENTRA, Departamento de Fisica, F.C.T., Universidade do Algarve, Campus de Gambelas, 8005-139 Faro

We study in detail the quantum process in which a pair of black holes is created in a higher D-dimensional de Sitter (dS) background. The energy to materialize and accelerate the pair comes from the positive cosmological constant. The instantons that describe the process are obtained from the Tangherlini black hole solutions. Our pair creation rates reduce to the pair creation rate for Reissner-Nordstroem-dS solutions when D=4. Pair creation of black holes in the dS background becomes less suppressed when the dimension of the spacetime increases. The dS space is the only background in which we can discuss analytically themore » pair creation process of higher dimensional black holes, since the C-metric and the Ernst solutions, which describe, respectively, a pair accelerated by a string and by an electromagnetic field, are not known yet in a higher dimensional spacetime.« less

Mobile, Collaborative Situated Knowledge Creation for Urban Planning

PubMed Central

Zurita, Gustavo; Baloian, Nelson

2012-01-01

Geo-collaboration is an emerging research area in computer sciences studying the way spatial, geographically referenced information and communication technologies can support collaborative activities. Scenarios in which information associated to its physical location are of paramount importance are often referred as Situated Knowledge Creation scenarios. To date there are few computer systems supporting knowledge creation that explicitly incorporate physical context as part of the knowledge being managed in mobile face-to-face scenarios. This work presents a collaborative software application supporting visually-geo-referenced knowledge creation in mobile working scenarios while the users are interacting face-to-face. The system allows to manage data information associated to specific physical locations for knowledge creation processes in the field, such as urban planning, identifying specific physical locations, territorial management, etc.; using Tablet-PCs and GPS in order to geo-reference data and information. It presents a model for developing mobile applications supporting situated knowledge creation in the field, introducing the requirements for such an application and the functionalities it should have in order to fulfill them. The paper also presents the results of utility and usability evaluations. PMID:22778639

Mobile, collaborative situated knowledge creation for urban planning.

PubMed

Zurita, Gustavo; Baloian, Nelson

2012-01-01

Geo-collaboration is an emerging research area in computer sciences studying the way spatial, geographically referenced information and communication technologies can support collaborative activities. Scenarios in which information associated to its physical location are of paramount importance are often referred as Situated Knowledge Creation scenarios. To date there are few computer systems supporting knowledge creation that explicitly incorporate physical context as part of the knowledge being managed in mobile face-to-face scenarios. This work presents a collaborative software application supporting visually-geo-referenced knowledge creation in mobile working scenarios while the users are interacting face-to-face. The system allows to manage data information associated to specific physical locations for knowledge creation processes in the field, such as urban planning, identifying specific physical locations, territorial management, etc.; using Tablet-PCs and GPS in order to geo-reference data and information. It presents a model for developing mobile applications supporting situated knowledge creation in the field, introducing the requirements for such an application and the functionalities it should have in order to fulfill them. The paper also presents the results of utility and usability evaluations.

Stakeholder views on the creation and use of genetically-engineered animals in research.

PubMed

Ormandy, Elisabeth H

2016-05-01

This interview-based study examined the diversity of views relating to the creation and use of genetically-engineered (GE) animals in biomedical science. Twenty Canadian participants (eight researchers, five research technicians and seven members of the public) took part in the interviews, in which four main themes were discussed: a) how participants felt about the genetic engineering of animals as a practice; b) governance of the creation and use of GE animals in research, and whether current guidelines are sufficient; c) the Three Rs (Replacement, Reduction, Refinement) and how they are applied during the creation and use of GE animals in research; and d) whether public opinion should play a greater role in the creation and use of GE animals. Most of the participants felt that the creation and use of GE animals for biomedical research purposes (as opposed to food purposes) is acceptable, provided that tangible human health benefits are gained. However, obstacles to Three Rs implementation were identified, and the participants agreed that more effort should be placed on engaging the public on the use of GE animals in research. 2016 FRAME.

Higher dimensional strange quark matter solutions in self creation cosmology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Şen, R., E-mail: ramazansen-1991@hotmail.com; Aygün, S., E-mail: saygun@comu.edu.tr

In this study, we have generalized the higher dimensional flat Friedmann-Robertson-Walker (FRW) universe solutions for a cloud of string with perfect fluid attached strange quark matter (SQM) in Self Creation Cosmology (SCC). We have obtained that the cloud of string with perfect fluid does not survive and the string tension density vanishes for this model. However, we get dark energy model for strange quark matter with positive density and negative pressure in self creation cosmology.

Likelihood of Starting Dialysis after Incident Fistula Creation

PubMed Central

Quinn, Robert R.; Garg, Amit X.; Kim, S. Joseph; Wald, Ron; Paterson, J. Michael

2012-01-01

Summary Background and objectives Guidelines promote early fistula creation to avoid central venous catheter use. This practice may lead to fistula creations in patients who never receive dialysis. The objective of this study was to estimate the risk of fistula nonuse with long-term follow-up. Design, setting, participants, & measurements Administrative health data identified 1929 predialysis adults who had their first fistula creation between April of 2002 and March of 2006. Patients were followed for a minimum of 2 years or until they began dialysis, received a kidney transplant, or died. Results The median follow-up times in patients who started dialysis, died without receiving dialysis, and remained in predialysis were 6.1, 11.5, and 38.7 months, respectively. Eighty-one percent of patients initiated dialysis; 9% of patients died without receiving dialysis, and 10% of patients remained predialysis. Forty percent of patients had their first fistula creation 3–12 months before initiating dialysis (the recommended window). Thirty percent were created within 90 days of starting dialysis; 30% were created more than 1 year before starting dialysis, and 10% were created more than 2 years before starting dialysis. Older patients, females, and patients with less comorbidity were not as likely to initiate dialysis after incident fistula creation. Conclusions Most patients who underwent fistula creation before starting dialysis eventually received dialysis with extended follow-up, but the risk was significantly modified by age, sex, and comorbidity. Many patients had fistula creations earlier or later than recommended. PMID:22344512

Recipe creation for automated defect classification with a 450mm surface scanning inspection system based on the bidirectional reflectance distribution function of native defects

NASA Astrophysics Data System (ADS)

Yathapu, Nithin; McGarvey, Steve; Brown, Justin; Zhivotovsky, Alexander

2016-03-01

This study explores the feasibility of Automated Defect Classification (ADC) with a Surface Scanning Inspection System (SSIS). The defect classification was based upon scattering sensitivity sizing curves created via modeling of the Bidirectional Reflectance Distribution Function (BRDF). The BRDF allowed for the creation of SSIS sensitivity/sizing curves based upon the optical properties of both the filmed wafer samples and the optical architecture of the SSIS. The elimination of Polystyrene Latex Sphere (PSL) and Silica deposition on both filmed and bare Silicon wafers prior to SSIS recipe creation and ADC creates a challenge for light scattering surface intensity based defect binning. This study explored the theoretical maximal SSIS sensitivity based on native defect recipe creation in conjunction with the maximal sensitivity derived from BRDF modeling recipe creation. Single film and film stack wafers were inspected with recipes based upon BRDF modeling. Following SSIS recipe creation, initially targeting maximal sensitivity, selected recipes were optimized to classify defects commonly found on non-patterned wafers. The results were utilized to determine the ADC binning accuracy of the native defects and evaluate the SSIS recipe creation methodology. A statistically valid sample of defects from the final inspection results of each SSIS recipe and filmed substrate were reviewed post SSIS ADC processing on a Defect Review Scanning Electron Microscope (SEM). Native defect images were collected from each statistically valid defect bin category/size for SEM Review. The data collected from the Defect Review SEM was utilized to determine the statistical purity and accuracy of each SSIS defect classification bin. This paper explores both, commercial and technical, considerations of the elimination of PSL and Silica deposition as a precursor to SSIS recipe creation targeted towards ADC. Successful integration of SSIS ADC in conjunction with recipes created via BRDF modeling has the potential to dramatically reduce the workload requirements of a Defect Review SEM and save a significant amount of capital expenditure for 450mm SSIS recipe creation.

Creationism at the grass roots: A study of a local creationist institution

NASA Astrophysics Data System (ADS)

Wendel, Paul J.

Relying on the book of Genesis as a source text, young-earth creationists or "creation scientists" claim to find physical evidence that the earth was created in six 24-hour periods less than ten thousand years ago and that most of the geologic column was laid down in a year-long worldwide flood. Unsurprisingly, these claims lead to a boundary dispute over the definition of science, in which mainstream scientists impugn the validity of creation science and creation scientists respond in kind. Although young-earth creationism is a growing movement, little is known about it. In particular, little is known about how creationists view the relationship between creationism and science or how the rhetoric of moral, cultural, environmental, and/or biological decline informs creationist practice. In order to investigate these issues, I studied the Fossil Museum (pseudonym), a local young-earth creationist institution, through a combination of naturalistic inquiry and visitor interviews. With respect to the rhetoric of decline, I found that cultural, environmental, and biological decline appear to function independently of one another in Fossil Museum rhetoric. With respect to views of the relationship between creationism and science, I found that despite having limited training or experience in science and despite committing numerous scientific errors, Fossil Museum associates respect and emulate science. Believing that physical evidence mediated by honest science will vindicate young-earth creationism, Fossil Museum associates speak of science in highly Baconian terms, invoking the ideal of assumption-free data and privileging observation over inference. They also accept the notion that science should be falsifiable and they suggest that on this criterion, mainstream science is not scientific. Yet because of their belief that physical evidence can vindicate their position, they openly discuss counterevidence to young-earth creationism, regarding such counterevidence as anomalies for future resolution rather than occasions for crisis. I conclude that because of Fossil Museum associates' honest approach to physical data and their belief that science can resolve disputes, productive dialogue is possible and desirable between mainstream scientists and some young-earth creationists, but such dialogue will be useful only if it is aimed at mutual understanding rather than mutual conversion.

Transparency in the ePortfolio Creation Process

ERIC Educational Resources Information Center

Jones, Stephanie A.; Downs, Elizabeth; Jenkins, Stephen J.

2015-01-01

This paper presents the findings of a study examining the effect of transparency on the ePortfolio creation process. The purpose of the study was to examine whether increased awareness of other students' ePortfolios through the implementation of transparency and peer review would positively affect the quality of performance of school library media…

Ciclo Basico Polivalente (Basic Comprehensive Courses of Study).

ERIC Educational Resources Information Center

Boletin del Centro Nacional de Documentacion e Informacion Educativa, 1970

1970-01-01

This article discusses the creation of comprehensive secondary schools in Argentina to meet the diversified goals of the population in any given geographical region. The plan described here provides for the creation of several basic-study cycles within one school so that students may pursue courses in commercial, technical, and academic fields.…

Promoting Positive Attitudes towards Science "and" Religion among Sixth-Form Pupils: Dealing with Scientism and Creationism

ERIC Educational Resources Information Center

Astley, Jeff; Francis, Leslie J.

2010-01-01

A sample of 187 female students, attending a sixth-form study day on religious studies, completed a questionnaire containing four scales concerned with assessing: attitude towards theistic religion, attitude towards science, scientism and creationism. The data demonstrated a negative correlation between attitude towards religion and attitude…

Clergy Views on Evolution, Creationism, Science, and Religion

ERIC Educational Resources Information Center

Colburn, Alan; Henriques, Laura

2006-01-01

Spurred by students who felt conflicted accepting evolution and the tenets of their faiths, yet knowing their faiths supported science and evolution, we began a study to determine the views clergy espouse on issues related to evolution, creationism, science, and religion. The resulting study included structured interviews with eight clergy and a…

Measures to Combat Research Phobia among Undergraduates for Knowledge Creation in Imo State

ERIC Educational Resources Information Center

Ihebereme, Chioma I.

2012-01-01

The study examined the measures to combat research phobia among undergraduates in order to achieve knowledge creation. The study used Alvan Ikoku Federal College of Education Owerri in Imo State as case study. An 11-item four point Likert-type scale of Agreed (A) = 4 points, Strongly Agreed (SA) = 3 points, Disagreed (D) = 2 points and Strongly…

Fashion a Field Guide To Your School Nature Area.

ERIC Educational Resources Information Center

Dean, Bruce R.

1996-01-01

Outlines activities for creating a field guide by studying nature around a school. Includes instructions for creation of a database for recording information, for identification of various plants and animals, and for actual creation of a book. (AIM)

Origami Inspired Self-assembly of Patterned and Reconfigurable Particles

PubMed Central

Pandey, Shivendra; Gultepe, Evin; Gracias, David H.

2013-01-01

There are numerous techniques such as photolithography, electron-beam lithography and soft-lithography that can be used to precisely pattern two dimensional (2D) structures. These technologies are mature, offer high precision and many of them can be implemented in a high-throughput manner. We leverage the advantages of planar lithography and combine them with self-folding methods1-20 wherein physical forces derived from surface tension or residual stress, are used to curve or fold planar structures into three dimensional (3D) structures. In doing so, we make it possible to mass produce precisely patterned static and reconfigurable particles that are challenging to synthesize. In this paper, we detail visualized experimental protocols to create patterned particles, notably, (a) permanently bonded, hollow, polyhedra that self-assemble and self-seal due to the minimization of surface energy of liquefied hinges21-23 and (b) grippers that self-fold due to residual stress powered hinges24,25. The specific protocol described can be used to create particles with overall sizes ranging from the micrometer to the centimeter length scales. Further, arbitrary patterns can be defined on the surfaces of the particles of importance in colloidal science, electronics, optics and medicine. More generally, the concept of self-assembling mechanically rigid particles with self-sealing hinges is applicable, with some process modifications, to the creation of particles at even smaller, 100 nm length scales22, 26 and with a range of materials including metals21, semiconductors9 and polymers27. With respect to residual stress powered actuation of reconfigurable grasping devices, our specific protocol utilizes chromium hinges of relevance to devices with sizes ranging from 100 μm to 2.5 mm. However, more generally, the concept of such tether-free residual stress powered actuation can be used with alternate high-stress materials such as heteroepitaxially deposited semiconductor films5,7 to possibly create even smaller nanoscale grasping devices. PMID:23407436

Three-dimensional simulation of gas and dust in Io's Pele plume

NASA Astrophysics Data System (ADS)

McDoniel, William J.; Goldstein, David B.; Varghese, Philip L.; Trafton, Laurence M.

2015-09-01

Io's giant Pele plume rises high above the moon's surface and produces a complex deposition pattern. We use the direct simulation Monte Carlo (DSMC) method to model the flow of SO2 gas and silicate ash from the surface of the lava lake, into the umbrella-shaped canopy of the plume, and eventually onto the surface where the flow leaves black "butterfly wings" surrounded by a large red ring. We show how the geometry of the lava lake, from which the gas is emitted, is responsible for significant asymmetry in the plume and for the shape of the red deposition ring by way of complicated gas-dynamic interactions between parts of the gas flow arising from different areas in the lava lake. We develop a model for gas flow in the immediate vicinity of the lava lake and use it to show that the behavior of ash particles of less than about 2 μm in diameter in the plume is insensitive to the details of how they are introduced into the flow because they are coupled to the gas at low altitudes. We simulate dust particles in the plume to show how particle size determines the distance from the lava lake at which particles deposit on the surface, and we use this dependence to find a size distribution of black dust particles in the plume that provides the best explanation for the observed black fans to the east and west of the lava lake. This best-fit particle size distribution suggests that there may be two distinct mechanisms of black dust creation at Pele, and when two log-normal distributions are fit to our results we obtain a mean particle diameter of 88 nm. We also propose a mechanism by which the condensible plume gas might overlay black dust in areas where black coloration is not observed and compare this to the observed overlaying of Pillanian dust by Pele's red ring.

Discovering the knowledge creation process of an expert group in women-friendly policy: The policy case of Seoul City.

PubMed

Oh, Young Sam; Nam, SungHee; Kim, Yuna

2016-01-01

This research explores how expert knowledge is created in the process of women-friendly policy making, based on actor network theory (ANT). To address this purpose, this study uses the "Women's Happiness in the City of Seoul" policy initiated by the local government of Seoul as one example of policy development. Research findings demonstrate that knowledge creation in expert groups followed the four stages suggested by ANT. In addition, this study found that various types of knowledge emerged from individual experts. This research elucidates the process of knowledge creation and its meanings for women-friendly policy.

Translational Entanglement and Teleportation of Matter Wavepackets by Collisions and Half-Collisions

NASA Astrophysics Data System (ADS)

Fisch, L.; Tal, A.; Kurizki, G.

To date, the translationally-entangled state originally proposed by Einstein, Podolsky and Rosen (EPR) in 1935 has not been experimentally realized for massive particles. Opatrný and Kurizki [Phys. Rev. Lett. 86, 3180 (2000)] have suggested the creation of a position- and momentum-correlated, i.e., translationally-entangled, pair of particles approximating the EPR state by dissociation of cold diatomic molecules, and further manipulation of the EPR pair effecting matter-wave teleportation. Here we aim at setting the principles of and quantifying translational entanglement by collisions and half-collisions. In collisions, the resonance width s and the initial phase-space distributions are shown to determine the degree of post-collisional momentum entanglement. Half-collisions (dissociation) are shown to yield different types of approximate EPR states. We analyse a feasible realization of translational EPR entanglement and teleportation via cold-molecule Raman dissociation and subsequent collisions, resolving both practical and conceptual difficulties it has faced so far: How to avoid entanglement loss due to the wavepacket spreading of the dissociation fragments? How to measure both position and momentum correlations of the dissociation fragments with sufficient accuracy to verify their EPR correlations? How to reliably perform two-particle (Bell) position and momentum measurements on one of the fragments and the wavepacket to be teleported?

Simple fabrication of antireflective silicon subwavelength structure with self-cleaning properties.

PubMed

Kim, Bo-Soon; Ju, Won-Ki; Lee, Min-Woo; Lee, Cheon; Lee, Seung-Gol; Beom-Hoan, O

2013-05-01

A subwavelength structure (SWS) was formed via a simple chemical wet etching using a gold (Au) catalyst. Single nano-sized Au particles were fabricated by metallic self-aggregation. The deposition and thermal annealing of the thin metallic film were carried out. Thermal annealing of a thin metallic film enables the creation of metal nano particles by isolating them from each other by means of the self-aggregation of the metal. After annealing, the samples were soaked in an aqueous etching solution of hydrofluoric acid and hydrogen peroxide. When silicon (Si) was etched for 2 minutes using the Au nano particles, the reflectance was decreased almost 0% over the entire wavelength range from 300 to 1300 nm due to its deep and steeply double tapered structure. When given varying incident angle degrees from 30 degrees to 60 degrees, the reflectance was also maintained at less than 3%. Following this, the etched silicon was treated with a plasma-polymerized fluorocarbon (PPFC) film of about 5 nm using an ICP reactor for surface modification. The result of this surface treatment, the contact angle increased significantly from 27.5 degrees to 139.3 degrees. The surface modification was successful and maintained almost 0% reflectance because of the thin film deposition.

Silica Encapsulation of Ferrimagnetic Zinc Ferrite Nanocubes Enabled by Layer-by-layer Polyelectrolyte Deposition

PubMed Central

Park, Jooneon; Porter, Marc D.; Granger, Michael C.

2016-01-01

Stable suspensions of magnetic nanoparticles (MNPs) with large magnetic moment, m, per particle have tremendous utility in a wide range of biological applications. However, due to the strong magnetic coupling interactions often present in these systems, it is challenging to stabilize individual, high moment, ferro- and ferrimagnetic nanoparticles. A novel approach to encapsulate large, i.e., >100 nm, ferrimagnetic zinc ferrite nanocubes (ZFNCs) with silica after an intermediary layer-by-layer polyelectrolyte deposition step is described in this paper. The seed ZFNCs are uniform in shape and size and have high saturation mass magnetic moment (σs ~100 emu/g, m~4×10−13 emu/particle at 150 Oe). For the MNP system described within, successful silica encapsulation and creation of discrete ZFNCs were realized only after depositing polyelectrolyte multilayers composed of alternating polyallylamine and polystyrene sulfonate. Without the intermediary polyelectrolyte layers, magnetic dipole-dipole interactions led to the formation of linearly chained ZFNCs embedded in a silica matrix. Characterization of particle samples was performed by electron microscopy, energy-dispersive X-ray spectroscopy, infrared spectroscopy, powder X-ray diffraction, dynamic light scattering (hydrodynamic size and ζ-potential), and vibrating sample magnetometry. The results of these characterizations, which were performed after each of the synthetic steps, and synthetic details are presented. PMID:25756216

Long-term cardiovascular changes following creation of arteriovenous fistula in patients with end stage renal disease.

PubMed

Reddy, Yogesh N V; Obokata, Masaru; Dean, Patrick G; Melenovsky, Vojtech; Nath, Karl A; Borlaug, Barry A

2017-06-21

Short-term studies have reported left ventricular (LV) dilatation following surgical creation of arteriovenous fistulas (AVF) or arteriovenous grafts (AVGs), but chronic cardiac structural and functional changes have not been examined or related to clinical outcomes following AVF/AVG. We sought to characterize the long-term changes in cardiac structure and function in patients undergoing shunt creation for haemodialysis. A retrospective analysis was performed of patients undergoing echocardiography before and after surgical AVF/AVG creation for the initiation of haemodialysis. 137 patients underwent echocardiographic examinations prior to AVF and 2.6 years (median) after AVF creation. Following AVF and dialysis initiation, there were reductions in blood pressure, body weight and estimated plasma volume coupled with modest reverse LV remodelling. In contrast, AVF/AVG creation was associated with significant right ventricular (RV) dilatation and deterioration in RV function. Incident heart failure (HF) developed in 43% of patients in tandem with greater RV remodeling. The development of RV dilation following surgical AVF/AVG was independently associated with increased risk of death [HR 3.9, 95% CI (1.7-9.2), P = 0.001]. In long-term follow-up, RV remodelling and dysfunction develop following AVF/AVG creation and dialysis initiation, despite improved control of LV pressure load through dialysis. Deleterious effects on right heart structure and function are coupled with development of incident HF and increased risk of death. Further study is required to identify patients at greatest risk for detrimental AVF/AVG changes who may benefit from alternate forms of dialysis or potentially ligation of existing AVF. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2017. For permissions, please email: journals.permissions@oup.com.

Estimating workforce development needs for high-speed rail in California.

DOT National Transportation Integrated Search

2012-03-01

This study provides an assessment of the job creation and attendant education and training needs associated with the creation of the California High-Speed Rail (CHSR) network, scheduled to begin construction in September 2012. Given the high profile ...

When and how does labour lead to love? The ontogeny and mechanisms of the IKEA effect.

PubMed

Marsh, Lauren E; Kanngiesser, Patricia; Hood, Bruce

2018-01-01

We elevate our constructions to a special status in our minds. This 'IKEA' effect leads us to believe that our creations are more valuable than items that are identical, but constructed by another. This series of studies utilises a developmental perspective to explore why this bias exists. Study 1 elucidates the ontogeny of the IKEA effect, demonstrating an emerging bias at age 5, corresponding with key developmental milestones in self-concept formation. Study 2 assesses the role of effort, revealing that the IKEA effect is not moderated by the amount of effort invested in the task in 5-to-6-year olds. Finally, Study 3 examines whether feelings of ownership moderate the IKEA effect, finding that ownership alone cannot explain why children value their creations more. Altogether, results from this study series are incompatible with existing theories of the IKEA bias. Instead, we propose a new framework to examine biases in decision making. Perhaps the IKEA effect reflects a link between our creations and our self-concept, emerging at age 5, leading us to value them more positively than others' creations. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

How to Implement Robots in Interventions for Children with Autism? A Co-creation Study Involving People with Autism, Parents and Professionals.

PubMed

Huijnen, Claire A G J; Lexis, Monique A S; Jansens, Rianne; de Witte, Luc P

2017-10-01

The aim of this study was to gain insight into how robots can be practically implemented into current education and therapy interventions for children with autism spectrum disorder (ASD). This qualitative study included focus groups and co-creation sessions. 73 Participants (professionals and adults with ASD) took part in 13 focus groups to elicit requirements for robot assisted interventions. Additionally, 22 participants (professionals, parents of children with ASD and adults with ASD) generated ideas for interventions using robot KASPAR in three co-creation sessions. This study resulted in: an overview of requirements concerning the robot, end-user, environment and practical implementation; a template to systematically describe robot interventions in general and for KASPAR in particular; and finally new interventions.

Academic Staff Utilization of Information and Communication Technology and Knowledge Creation in Cross River State Universities

ERIC Educational Resources Information Center

Ekpoh, Uduak Imo; Etor, Comfort Robert

2012-01-01

This study examined academic staff utilization of Information and Communication Technology (ICT) in knowledge creation in universities in Cross River State. The study was guided by two research questions and one hypothesis. A questionnaire was developed, validated and used for data collection from a sample of 300 academic staff. Descriptive…

Service Learning in Policy and Practice: A Study of Service Learning across Three Universities

ERIC Educational Resources Information Center

Ahmed, Zahra G.

2010-01-01

This dissertation studies the creation and implementation of service learning policy and the implications of these programs for democratic citizenship and political participation. The project focuses on service learning centers at three universities in the Los Angeles area, framing the creation and implementation of these campus-wide centers as an…

Science-On Line: Partnership Approach for the Creation of Internet-based Classroom Resources.

ERIC Educational Resources Information Center

Hawkins, Isabel; Battle, Robyn

Research has been conducted which develops case studies on how to engage scientists in partnerships with teachers. Studies have focused on the Internet and the World Wide Web as potential conduits of research results to the classroom, particularly if scientists and teachers were involved in joint creation of Internet-based curriculum and lesson…

Mathematics and Science Teachers' Perceptions about Using Drama during the Digital Story Creation Process

ERIC Educational Resources Information Center

Yuksekyalcin, Gozen; Tanriseven, Isil; Sancar-Tokmak, Hatice

2016-01-01

This case study investigated math and science teachers' perceptions about the use of creative drama during a digital story (DS) creation process for educational purposes. A total of 25 secondary science and math teachers were selected according to criterion sampling strategy to participate in the study. Data were collected through an open-ended…

(U) An Analytic Study of Piezoelectric Ejecta Mass Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tregillis, Ian Lee

2017-02-16

We consider the piezoelectric measurement of the areal mass of an ejecta cloud, for the specific case where ejecta are created by a single shock at the free surface and fly ballistically through vacuum to the sensor. To do so, we define time- and velocity-dependent ejecta “areal mass functions” at the source and sensor in terms of typically unknown distribution functions for the ejecta particles. Next, we derive an equation governing the relationship between the areal mass function at the source (which resides in the rest frame of the free surface) and at the sensor (which resides in the laboratorymore » frame). We also derive expressions for the analytic (“true”) accumulated ejecta mass at the sensor and the measured (“inferred”) value obtained via the standard method for analyzing piezoelectric voltage traces. This approach enables us to derive an exact expression for the error imposed upon a piezoelectric ejecta mass measurement (in a perfect system) by the assumption of instantaneous creation. We verify that when the ejecta are created instantaneously (i.e., when the time dependence is a delta function), the piezoelectric inference method exactly reproduces the correct result. When creation is not instantaneous, the standard piezo analysis will always overestimate the true mass. However, the error is generally quite small (less than several percent) for most reasonable velocity and time dependences. In some cases, errors exceeding 10-15% may require velocity distributions or ejecta production timescales inconsistent with experimental observations. These results are demonstrated rigorously with numerous analytic test problems.« less

The Origins and Development of A Cooperative Strategy for 21st Century Seapower (2015)

DTIC Science & Technology

2017-09-01

Strategic Studies REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is...unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT This study describes and analyzes the origins, creation, announcement, and dissemination of the...i Executive Summary This study describes and analyzes the origins, creation, announcement, and dissemination of the U.S. Navy–Marine Corps

Collective Interpretations of Early Science Learning about Earth and Space: A Cultural-Historical Study of Family Settings for Scientific Imagination

ERIC Educational Resources Information Center

Hao, Yijun; Fleer, Marilyn

2017-01-01

Depending upon a cultural-historical perspective, where play is defined as the creation of an imaginary situation, this study seeks to examine whether and how family joint creation of imaginary situations can provide the conditions for a child's science learning in early childhood. The paper reported here forms part of a broader study, and the…

How to Implement Robots in Interventions for Children with Autism? A Co-Creation Study Involving People with Autism, Parents and Professionals

ERIC Educational Resources Information Center

Huijnen, Claire A. G. J.; Lexis, Monique A. S.; Jansens, Rianne; de Witte, Luc P.

2017-01-01

The aim of this study was to gain insight into how robots can be practically implemented into current education and therapy interventions for children with autism spectrum disorder (ASD). This qualitative study included focus groups and co-creation sessions. 73 Participants (professionals and adults with ASD) took part in 13 focus groups to elicit…

Dust Dynamics Near Planetary Surfaces

NASA Astrophysics Data System (ADS)

Colwell, Joshua; Hughes, Anna; Grund, Chris

Observations of a lunar "horizon glow" by several Surveyor spacecraft in the 1960s opened the study of the dynamics of charged dust particles near planetary surfaces. The surfaces of the Moon and other airless planetary bodies in the solar system (asteroids, and other moons) are directly exposed to the solar wind and ionizing solar ultraviolet radiation, resulting in a time-dependent electric surface potential. Because these same objects are also exposed to bombardment by micrometeoroids, the surfaces are usually characterized by a power-law size distribution of dust that extends to sub-micron-sized particles. Individual particles can acquire a charge different from their surroundings leading to electrostatic levitation. Once levitated, particles may simply return to the surface on nearly ballistic trajectories, escape entirely from the moon or asteroid if the initial velocity is large, or in some cases be stably levitated for extended periods of time. All three outcomes have observable consequences. Furthermore, the behavior of charged dust near the surface has practical implications for planned future manned and unmanned activities on the lunar surface. Charged dust particles also act as sensitive probes of the near-surface plasma environment. Recent numerical modeling of dust levitation and transport show that charged micron-sized dust is likely to accumulate in topographic lows such as craters, providing a mechanism for the creation of dust "ponds" observed on the asteroid 433 Eros. Such deposition can occur when particles are supported by the photoelectron sheath above the dayside and drift over shadowed regions of craters where the surface potential is much smaller. Earlier studies of the lunar horizon glow are consistent with those particles being on simple ballistic trajectories following electrostatic launching from the surface. Smaller particles may be accelerated from the lunar surface to high altitudes consistent with observations of high altitude streams observed by Apollo astronauts and potentially also by the Clementine spacecraft. In addition to the Surveyor images of lunar horizon glow and the high altitude streamer measurements, the Apollo 17 Lunar Ejecta and Meteorite surface package detected signals consistent with the impact of relatively slow-moving dust particles that may have been charged dust electrostatically levitated from the surface. There is renewed interest in this near-surface dust environment with plans to return robotic landers and astronauts to the lunar surface. No Apollo-era instruments were specifically designed to detect or measure dust levitated off the lunar surface. One new experiment under study is the Autonomous Lunar Dust Observer (ALDO). ALDO is a high-sensitivity scanning lidar (laser radar) that autonomously maps and records its 3-D dust environment. Flexibility of programmable scan pattern enables ALDO to characterize the dust context in and around experiment sites. Repeated shallow angle scans in a vertical plane enable high vertical resolution studies of dust levitation near the ground. Single elevation angle sector or full azimuth scans enable large-area statistical surveys of the frequency and size of ejecta plumes from micrometeoroid impacts, and vertical or fixed-angle stares enable very high sensitivity dust profiles to extended ranges. It is estimated that backscatter from dust concentrations as low as 1/cm3 can be measured. The concept is equally applicable to surface and atmospheric studies of other airless bodies.

Risk factors of stoma re-creation after closure of diverting ileostomy in patients with rectal cancer who underwent low anterior resection or intersphincteric resection with loop ileostomy.

PubMed

Song, Ook; Kim, Kyung Hwan; Lee, Soo Young; Kim, Chang Hyun; Kim, Young Jin; Kim, Hyeong Rok

2018-04-01

The aim of this study was to identify the risk factors of stoma re-creation after closure of diverting ileostomy in patients with rectal cancer who underwent low anterior resection (LAR) or intersphincteric resection (ISR) with loop ileostomy. We retrospectively reviewed 520 consecutive patients with rectal cancer who underwent LAR or ISR with loop ileostomy from January 2005 to December 2014 at Chonnam National University Hwasun Hospital. Risk factors for stoma re-creation after ileostomy closure were evaluated. Among 520 patients with rectal cancer who underwent LAR or ISR with loop ileostomy, 458 patients underwent stoma closure. Among these patients, 45 (9.8%) underwent stoma re-creation. The median period between primary surgery and stoma closure was 5.5 months (range, 0.5-78.3 months), and the median period between closure and re-creation was 6.8 months (range, 0-71.5 months). Stoma re-creation was performed because of anastomosis-related complications (26, 57.8%), local recurrence (15, 33.3%), and anal sphincter dysfunction (3, 6.7%). Multivariate analysis showed that independent risk factors for stoma re-creation were anastomotic leakage (odds ratio [OR], 4.258; 95% confidence interval [CI], 1.814-9.993), postoperative radiotherapy (OR, 3.947; 95% CI, 1.624-9.594), and ISR (OR, 3.293; 95% CI, 1.462-7.417). Anastomotic leakage, postoperative radiotherapy, and ISR were independent risk factors for stoma re-creation after closure of ileostomy in patients with rectal cancer.

Beam-Beam Interaction Simulations with Guinea Pig (LCC-0125)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sramek, C

2003-11-20

At the interaction point of a particle accelerator, various phenomena occur which are known as beam-beam effects. Incident bunches of electrons (or positrons) experience strong electromagnetic fields from the opposing bunches, which leads to electron deflection, beamstrahlung and the creation of electron/positron pairs and hadrons due to two-photon exchange. In addition, the beams experience a ''pinch effect'' which focuses each beam and results in either a reduction or expansion of their vertical size. Finally, if a beam's disruption parameter is too large, the beam can develop a sinusoidal distortion, or two-stream (kink) instability. This project simulated and studied these effectsmore » as they relate to luminosity, deflection angles and energy loss in order to optimize beam parameters for the Next Linear Collider (NLC). Using the simulation program Guinea Pig, luminosity, deflection angle and beam energy data was acquired for different levels of beam offset and distortion. Standard deflection curves and luminosity plots agreed with theoretical models but also made clear the difficulties of e-e- feedback. Simulations emphasizing kink instability in modulated and straight beam collisions followed qualitative behavioral predictions and roughly fit recent analytic calculations. A study of e-e- collisions under design constraints for the NLC provided new estimates of how luminosity, beamstrahlung energy loss, upsilon parameter and deflection curve width scale with beam cross-sections ({sigma}{sub x}, {sigma}{sub y}, {sigma}{sub z}) and number of particles per bunch (N). Finally, this same study revealed luminosity maxima at large N and small {sigma}{sub y} which may merit further investigation.« less

Transjugular Intrahepatic Portosystemic Shunt Creation and Variceal Coil or Plug Embolization Ineffectively Attain Gastric Variceal Decompression or Occlusion: Results of a 26-Patient Retrospective Study.

PubMed

Lakhoo, Janesh; Bui, James T; Lokken, R Peter; Ray, Charles E; Gaba, Ron C

2016-07-01

To assess the efficacy of transjugular intrahepatic portosystemic shunt (TIPS) creation with or without variceal coil and/or plug embolization in decompressing or occluding gastric varices (GVs). In this retrospective study, 78 patients with GV bleeding who underwent TIPS creation with or without embolotherapy with metallic coils and/or plugs from 1999 to 2014 were identified. Individuals who had a bare-metal TIPS and/or lacked post-TIPS imaging or endoscopic follow-up were excluded. The final cohort included 26 patients (16 men; median age, 54 y; median Model for End-stage Liver Disease score, 16). Variceal types, supplying vessels, and postprocedure GV patency on cross-sectional imaging or endoscopy were assessed. The primary study outcome measure was GV patency rate as a surrogate for efficacy of TIPS creation with or without embolization. GVs included gastroesophageal varix types 1 (n = 10) and 2 (n = 2), isolated GV types 1 (n = 4) and 2 (n = 2), and unspecified (n = 8). TIPS creation resulted in a median final portosystemic pressure gradient of 7 mm Hg. Multiple GV-supplying vessels (left/posterior/short gastric veins) were present in 65% of patients (n = 17). Embolization was performed in 69% (n = 18). Thirteen, four, and nine patients had imaging, endoscopic, or both imaging/endoscopic follow-up. GV patency rate was 65% (n = 17; 61%/75% with/without embolization) at a median of 128.5 days (range, 1-1,295 d) after TIPS creation. Incidence of recurrent bleeding was 27% (n = 7), and the 90-day mortality rate was 15% (n = 4). In this study, most GVs showed persistent patency despite TIPS decompression and variceal embolization, and the incidence of recurrent bleeding was high. The findings suggest suboptimal efficacy for GVs, and indicate a need for study of alternative or adjunctive approaches to GV treatment, such as chemical obliteration. Copyright © 2016 SIR. Published by Elsevier Inc. All rights reserved.

Reduced quasilinear models for energetic particles interaction with Alfvenic eigenmodes

NASA Astrophysics Data System (ADS)

Ghantous, Katy

The Line Broadened Quasilinear (LBQ) and the 1.5D reduced models are able to predict the effect of Alfvenic eigenmodes' interaction with energetic particles in burning plasmas. This interaction can result in energetic-particle losses that can damage the first wall, deteriorate the plasma performance, and even prevent ignition. The 1.5D model assumes a broad spectrum of overlapping modes and, based on analytic expressions for the growth and damping rates, calculates the pressure profiles that the energetic particles relax to upon interacting with the modes. 1.5D is validated with DIII-D experiments and predicted neutron losses consistent with observation. The model is employed to predict alpha-particle fusion-product losses in a large-scale operational parameter-space for burning plasmas. The LBQ model captures the interaction both in the regime of isolated modes as well as in the conventional regime of overlapping modes. Rules were established that allow quasilinear equations to replicate the expected steady-state saturation levels of isolated modes. The fitting formula is improved and the model is benchmarked with a Vlasov code, BOT. The saturation levels are accurately predicted and the mode evolution is well-replicated in the case of steady-state evolution where the collisions are high enough that coherent structures do not form. When the collisionality is low, oscillatory behavior can occur. LBQ can also exhibit non-steady behavior, but the onset of oscillations occurs for much higher collisional rates in BOT than in LBQ. For certain parameters of low collisionality, hole-clump creation and frequency chirping can occur which are not captured by the LBQ model. Also, there are cases of non-steady evolution without chirping which is possible for LBQ to study. However the results are inconclusive since the periods and amplitudes of the oscillations in the mode evolution are not well-replicated. If multiple modes exist, they can grow to the point of overlap which results in two-dimensional diffusion with cross terms. A diffusion scheme is proposed and validated to resolve this dynamics in (Pφ,E) phase-space.

Multi-bit dark state memory: Double quantum dot as an electronic quantum memory

NASA Astrophysics Data System (ADS)

Aharon, Eran; Pozner, Roni; Lifshitz, Efrat; Peskin, Uri

2016-12-01

Quantum dot clusters enable the creation of dark states which preserve electrons or holes in a coherent superposition of dot states for a long time. Various quantum logic devices can be envisioned to arise from the possibility of storing such trapped particles for future release on demand. In this work, we consider a double quantum dot memory device, which enables the preservation of a coherent state to be released as multiple classical bits. Our unique device architecture uses an external gating for storing (writing) the coherent state and for retrieving (reading) the classical bits, in addition to exploiting an internal gating effect for the preservation of the coherent state.

Workshop on Squeezed States and Uncertainty Relations

NASA Technical Reports Server (NTRS)

Han, Daesoo (Editor); Kim, Y. S. (Editor); Zachary, W. W. (Editor)

1992-01-01

The proceedings from the workshop are presented, and the focus was on the application of squeezed states. There are many who say that the potential for industrial applications is enormous, as the history of the conventional laser suggests. All those who worked so hard to produce squeezed states of light are continuing their efforts to construct more efficient squeezed-state lasers. Quite naturally, they are looking for new experiments using these lasers. The physical basis of squeezed states is the uncertainty relation in Fock space, which is also the basis for the creation and annihilation of particles in quantum field theory. Indeed, squeezed states provide a unique opportunity for field theoreticians to develop a measurement theory for quantum field theory.

Information loss.

PubMed

Unruh, William G; Wald, Robert M

2017-09-01

The complete gravitational collapse of a body in general relativity will result in the formation of a black hole. Although the black hole is classically stable, quantum particle creation processes will result in the emission of Hawking radiation to infinity and corresponding mass loss of the black hole, eventually resulting in the complete evaporation of the black hole. Semiclassical arguments strongly suggest that, in the process of black hole formation and evaporation, a pure quantum state will evolve to a mixed state, i.e. there will be 'information loss'. There has been considerable controversy over this issue for more than 40 years. In this review, we present the arguments in favor of information loss, and analyze some of the counter-arguments and alternative possibilities.

Information loss

NASA Astrophysics Data System (ADS)

Unruh, William G.; Wald, Robert M.

2017-09-01

The complete gravitational collapse of a body in general relativity will result in the formation of a black hole. Although the black hole is classically stable, quantum particle creation processes will result in the emission of Hawking radiation to infinity and corresponding mass loss of the black hole, eventually resulting in the complete evaporation of the black hole. Semiclassical arguments strongly suggest that, in the process of black hole formation and evaporation, a pure quantum state will evolve to a mixed state, i.e. there will be ‘information loss’. There has been considerable controversy over this issue for more than 40 years. In this review, we present the arguments in favor of information loss, and analyze some of the counter-arguments and alternative possibilities.

Time-resolved brightness measurements by streaking

NASA Astrophysics Data System (ADS)

Torrance, Joshua S.; Speirs, Rory W.; McCulloch, Andrew J.; Scholten, Robert E.

2018-03-01

Brightness is a key figure of merit for charged particle beams, and time-resolved brightness measurements can elucidate the processes involved in beam creation and manipulation. Here we report on a simple, robust, and widely applicable method for the measurement of beam brightness with temporal resolution by streaking one-dimensional pepperpots, and demonstrate the technique to characterize electron bunches produced from a cold-atom electron source. We demonstrate brightness measurements with 145 ps temporal resolution and a minimum resolvable emittance of 40 nm rad. This technique provides an efficient method of exploring source parameters and will prove useful for examining the efficacy of techniques to counter space-charge expansion, a critical hurdle to achieving single-shot imaging of atomic scale targets.

Bell violation in the sky

NASA Astrophysics Data System (ADS)

Choudhury, Sayantan; Panda, Sudhakar; Singh, Rajeev

2017-02-01

In this work, we have studied the possibility of setting up Bell's inequality violating experiment in the context of cosmology, based on the basic principles of quantum mechanics. First we start with the physical motivation of implementing the Bell inequality violation in the context of cosmology. Then to set up the cosmological Bell violating test experiment we introduce a model independent theoretical framework using which we have studied the creation of new massive particles by implementing the WKB approximation method for the scalar fluctuations in the presence of additional time-dependent mass contribution in the cosmological perturbation theory. Here for completeness we compute the total number density and the energy density of the newly created particles in terms of the Bogoliubov coefficients using the WKB approximation method. Next using the background scalar fluctuation in the presence of a new time-dependent mass contribution, we explicitly compute the expression for the one point and two point correlation functions. Furthermore, using the results for a one point function we introduce a new theoretical cosmological parameter which can be expressed in terms of the other known inflationary observables and can also be treated as a future theoretical probe to break the degeneracy amongst various models of inflation. Additionally, we also fix the scale of inflation in a model-independent way without any prior knowledge of primordial gravitational waves. Also using the input from a newly introduced cosmological parameter, we finally give a theoretical estimate for the tensor-to-scalar ratio in a model-independent way. Next, we also comment on the technicalities of measurements from isospin breaking interactions and the future prospects of newly introduced massive particles in a cosmological Bell violating test experiment. Further, we cite a precise example of this setup applicable in the context of string theory motivated axion monodromy model. Then we comment on the explicit role of the decoherence effect and high spin on cosmological Bell violating test experiment. Finally, we provide a theoretical bound on the heavy particle mass parameter for scalar fields, gravitons and other high spin fields from our proposed setup.

The Price of Anarchy in Network Creation Games Is (Mostly) Constant

NASA Astrophysics Data System (ADS)

Mihalák, Matúš; Schlegel, Jan Christoph

We study the price of anarchy and the structure of equilibria in network creation games. A network creation game (first defined and studied by Fabrikant et al. [4]) is played by n players {1,2,...,n}, each identified with a vertex of a graph (network), where the strategy of player i, i = 1,...,n, is to build some edges adjacent to i. The cost of building an edge is α> 0, a fixed parameter of the game. The goal of every player is to minimize its creation cost plus its usage cost. The creation cost of player i is α times the number of built edges. In the SumGame (the original variant of Fabrikant et al. [4]) the usage cost of player i is the sum of distances from i to every node of the resulting graph. In the MaxGame (variant defined and studied by Demaine et al. [3]) the usage cost is the eccentricity of i in the resulting graph of the game. In this paper we improve previously known bounds on the price of anarchy of the game (of both variants) for various ranges of α, and give new insights into the structure of equilibria for various values of α. The two main results of the paper show that for α > 273·n all equilibria in SumGame are trees and thus the price of anarchy is constant, and that for α> 129 all equilibria in MaxGame are trees and the price of anarchy is constant. For SumGame this (almost) answers one of the basic open problems in the field - is price of anarchy of the network creation game constant for all values of α? - in an affirmative way, up to a tiny range of α.

In situ grain fracture mechanics during uniaxial compaction of granular solids

NASA Astrophysics Data System (ADS)

Hurley, R. C.; Lind, J.; Pagan, D. C.; Akin, M. C.; Herbold, E. B.

2018-03-01

Grain fracture and crushing are known to influence the macroscopic mechanical behavior of granular materials and be influenced by factors such as grain composition, morphology, and microstructure. In this paper, we investigate grain fracture and crushing by combining synchrotron x-ray computed tomography and three-dimensional x-ray diffraction to study two granular samples undergoing uniaxial compaction. Our measurements provide details of grain kinematics, contacts, average intra-granular stresses, inter-particle forces, and intra-grain crystal and fracture plane orientations. Our analyses elucidate the complex nature of fracture and crushing, showing that: (1) the average stress states of grains prior to fracture vary widely in their relation to global and local trends; (2) fractured grains experience inter-particle forces and stored energies that are statistically higher than intact grains prior to fracture; (3) fracture plane orientations are primarily controlled by average intra-granular stress and contact fabric rather than the orientation of the crystal lattice; (4) the creation of new surfaces during fracture accounts for a very small portion of the energy dissipated during compaction; (5) mixing brittle and ductile grain materials alters the grain-scale fracture response. The results highlight an application of combined x-ray measurements for non-destructive in situ analysis of granular solids and provide details about grain fracture that have important implications for theory and modeling.

Contact processes with competitive dynamics in bipartite lattices: effects of distinct interactions

NASA Astrophysics Data System (ADS)

Pianegonda, Salete; Fiore, Carlos E.

2014-05-01

The two-dimensional contact process (CP) with a competitive dynamics proposed by Martins et al (2011 Phys. Rev. E 84 011125) leads to the appearance of an unusual active-asymmetric phase, in which the system sublattices are unequally populated. It differs from the usual CP only by the fact that particles also interact with their next-nearest neighbor sites via a distinct strength creation rate, and for the inclusion of an inhibition effect, proportional to the local density. Aimed at investigating the robustness of such an asymmetric phase, in this paper we study the influence of distinct interactions for two bidimensional CPs. In the first model, the interaction between first neighbors requires a minimal neighborhood of adjacent particles for creating new offspring, whereas second neighbors interact as usual (e.g. at least one neighboring particle is required). The second model takes the opposite situation, in which the restrictive dynamics is in the interaction between next-nearest neighbor sites. Both models are investigated under mean field theory (MFT) and Monte Carlo simulations. In similarity with results by Martins et al, the inclusion of distinct sublattice interactions maintains the occurrence of an asymmetric active phase and re-entrant transition lines. In contrast, remarkable differences are presented, such as discontinuous phase transitions (even between the active phases), the appearance of tricritical points and the stabilization of active phases under larger values of control parameters. Finally, we have shown that the critical behaviors are not altered due to the change of interactions, in which the absorbing transitions belong to the directed percolation (DP) universality class, whereas second-order active phase transitions belong to the Ising universality class.

SPH simulation of turbulent flow past a high-frequency in-line oscillating cylinder near free-surface

NASA Astrophysics Data System (ADS)

Ghazanfarian, Jafar; Saghatchi, Roozbeh; Gorji-Bandpy, Mofid

2016-08-01

This paper studies a two-dimensional incompressible viscous flow past a circular cylinder with in-line oscillation close to a free-surface. The sub-particle scale (SPS) turbulence model of a Lagrangian particle-based smoothed-particle hydrodynamics (SPH) method has been used to solve the full Navier-Stokes equations together with the continuity equation. The accuracy of numerical code has been verified using two cases consisting of an oscillating cylinder placed in the stationary fluid, and flow over a fixed cylinder close to a free-surface. Simulations are conducted for the Froude number of 0.3, the Reynolds numbers of 40 and 80, various gap ratios for fully-submerged and half-submerge cylinders. The dimensionless frequency and amplitude of oscillating have been chosen as 0.5, 0.8 and 10, 15, respectively. The selection of such a high oscillating frequency causes the flow regime to become turbulent. It is seen that the gap ratio defined as the ratio of cylinder distance from free-surface and its diameter, strongly affects the flow pattern and the magnitude of the drag and lift coefficients. The jet-like flow (the region above the cylinder and beneath the free-surface) creation is discussed in detail and showed that the strength of this jet-like flow is weakened when the gap ratio shrinks. It is seen that by decreasing the gap ratio, the lift and drag coefficients increase and decrease, respectively. It is found that the Reynolds number has an inverse effect on the drag and lift coefficients. Also, it is concluded that by increasing the amplitude of oscillation the drag coefficient increases.

Optimal control of population and coherence in three-level Λ systems

NASA Astrophysics Data System (ADS)

Kumar, Praveen; Malinovskaya, Svetlana A.; Malinovsky, Vladimir S.

2011-08-01

Optimal control theory (OCT) implementations for an efficient population transfer and creation of maximum coherence in a three-level system are considered. We demonstrate that the half-stimulated Raman adiabatic passage scheme for creation of the maximum Raman coherence is the optimal solution according to the OCT. We also present a comparative study of several implementations of OCT applied to the complete population transfer and creation of the maximum coherence. Performance of the conjugate gradient method, the Zhu-Rabitz method and the Krotov method has been analysed.

Influence of Instructional Resources in Learning Agriculture in Secondary School on Employment Creation in Vihiga County, Kenya

ERIC Educational Resources Information Center

Aholi, Seraphine Sherry; Konyango, Jacob J. J. Ochieng'; Kibett, Joash K.

2018-01-01

The purpose of this study was to determine the influence of instructional resources in learning agriculture in secondary school on employment creation in Vihiga County, Kenya. The study was conducted in Emuhaya Constituency, and it adopted qualitative research design using descriptive survey method. The target population was the youth who learnt…

Effect of traditional plants in Sri Lanka on skin keratinocyte count.

PubMed

Sano, Katsura; Someya, Takao; Hara, Kotaro; Sagane, Yoshimasa; Watanabe, Toshihiro; Wijesekara, R G S

2018-06-01

This article describes the effects of extracts of several plants collected in Sri Lanka on the number of human skin keratinocytes. This study especially focuses on the plants traditionally used in indigenous systems of medicine in Sri Lanka, such as Ayurveda, as described below (English name, "local name in Sri Lanka," scientific name). Neem plant,"kohomba," Azadirachta indica (Sujarwo et al., 2016; Nature's Beauty Creations Ltd., 2014) [1,2], emblic myrobalan plant, "nelli," Phyllanthus emblica (Singh et al., 2011; Nature's Beauty Creations Ltd., 2014) [3,4], malabar nut plant, "adhatoda," Justicia adhatoda (Claeson et al., 2000; Nature's Beauty Creations Ltd., 2014) [5,6], holy basil plant, "maduruthala," Ocimum tenuiflorum ( Cohen et al., 2014; Nature's Beauty Creations Ltd., 2014) [7,8]. The expression profiles are provided as line graphs.

Relationship between organizational structure and creativity in teaching hospitals.

PubMed

Rezaee, Rita; Marhamati, Saadat; Nabeiei, Parisa; Marhamati, Raheleh

2014-07-01

Organization structure and manpower constitute two basic components of anorganization and both are necessary for stablishing an organization. The aim of this survey was to investigate the type of the organization structure (mechanic and organic) from viewpoint of senior and junior managers in Shiraz teaching hospitals and creativity in each of these two structures. In this cross-sectional and descriptive-analytic study, organization structure and organizational creation questionnaires were filled out by hospital managers. According to the statistical consultation and due to limited target population, the entire study population was considered as sample. Thus, the sample size in this study was 84 (12 hospitals and every hospital, n = 7). For data analysis, SPSS 14 was used and Spearman correlation coefficient and t-test were used. RESULTS showed that there is a negative association between centralization and complexity with organizational creation and its dimensions. Also there was a negative association between formalization and 4 organizational creation dimensions: reception change, accepting ambiguity, abet new view and less control outside (p=0.001). The results of this study showed that the creation in hospitals with organic structure is more than that in hospitals with mechanic structure.

Relationship between organizational structure and creativity in teaching hospitals

PubMed Central

REZAEE, RITA; MARHAMATI, SAADAT; NABEIEI, PARISA; MARHAMATI, RAHELEH

2014-01-01

Introduction: Organization structure and manpower constitute two basic components of anorganization and both are necessary for stablishing an organization. The aim of this survey was to investigate the type of the organization structure (mechanic and organic) from viewpoint of senior and junior managers in Shiraz teaching hospitals and creativity in each of these two structures. Methods: In this cross-sectional and descriptive-analytic study, organization structure and organizational creation questionnaires were filled out by hospital managers. According to the statistical consultation and due to limited target population, the entire study population was considered as sample. Thus, the sample size in this study was 84 (12 hospitals and every hospital, n = 7). For data analysis, SPSS 14 was used and Spearman correlation coefficient and t-test were used. Results: Results showed that there is a negative association between centralization and complexity with organizational creation and its dimensions. Also there was a negative association between formalization and 4 organizational creation dimensions: reception change, accepting ambiguity, abet new view and less control outside (p=0.001). Conclusion: The results of this study showed that the creation in hospitals with organic structure is more than that in hospitals with mechanic structure. PMID:25512934

Biological Experiments in Microgravity Conditions Using Magnetic Micro- and Nano-Particles

NASA Astrophysics Data System (ADS)

Nechitailo, Galina S.; Kuznetsov, Anatoli; Kuznetsov, Oleg

2016-07-01

Gravity affects all living organisms on Earth, and plays a role in multiple processes in them. In microgravity conditions (e.g., on board of a spacecraft) many of these processes are disturbed, e.g., spatial orientation is lost, mass and heat exchange is distorted, many adaptive mechanisms no longer function, etc. Negation of these adverse effects by creation of pseudo-gravity to by centrifugation is complicated, expensive and unpractical. We propose to use naturally occurring magnetic heterogeneity of all living cells and high gradient magnetic fields as an alternative approach to negating the adverse effects of microgravity on living systems. In non-uniform magnetic field, magnetically heterogeneous objects experience a system of ponderomotive forces. For a weak magnetic particle, the net ponderomotive magnetic force: Fm = Δχ•V•grad(H2/2), where Δχ is the difference of susceptibilities of the particle and the surrounding media, V is the volume of the particle, grad(H2/2) is the dynamic factor of the magnetic field. We studied magnetic heterogeneity of plant gravity receptor cells, prepared and conducted experiments on board of the space station "Mir" on providing a gravity-like stimulus for flax seedlings using high gradient magnetic field ("Magnetogravistat" experiment). Later, a more sophisticated version of this experiment was flown on STS-107. These experiments provided new data on the mechanisms of plant gravity reception and created a method for substituting gravity for a living organism by a force of a different physical nature, to negate the adverse effects of microgravity. Since the ponderomotive force is proportional to the dynamic factor of the field grad(H2/2), the stronger the field, and the faster it changes over distance, the higher is the dynamic factor and the stronger the ponderomotive force. Therefore, in the small vicinity of a small ferromagnetic particle (preferably metallic micro or nano-particles), the forces are very significant even for weak magnetic objects, and can have significant effects on multiple processes in living cells/organisms. It was reported, that such high gradient magnetic fields can affect cell differentiation and cell proliferation processes in ground-based experiments. To prevent oxidation of ultradisperse ferromagnetic particles in aqueous media, it is beneficial to coat their surface with carbon. Suitable protected metallic micro- and nano-particles can be produced by a variety of techniques (CVD, plasmachemistry, joint grinding, etc.). Ferro-carbon particles produced by plasmachemical technique have high sorption capacities for various organic and inorganic compounds (as well as for various cell metabolites), can be formed in rather stable aqueous suspensions, and be controlled (e.g., sedimented) by a magnetic field. This makes these particles a very interesting research tool. In our opinion, biological experiments with ferro-carbon nano-structured particles in microgravity will generate important scientific data and will allow creating new methods of negating the adverse effects of microgravity on living systems.

Investigating Knowledge Creation Technology in an Engineering Course

ERIC Educational Resources Information Center

Jalonen, Satu; Lakkala, Minna; Paavola, Sami

2011-01-01

The aim of the present study was to examine the technological affordances of a web-based collaborative learning technology, Knowledge Practices Environment (KPE), for supporting different dimensions of knowledge creation processes. KPE was used by engineering students in a practically oriented undergraduate engineering course. The study…

Toward a Neurobiology of Child Psychotherapy

ERIC Educational Resources Information Center

Kay, Jerald

2009-01-01

Brain imaging studies have demonstrated that psychotherapy alters brain structure and function. Learning and memory, both implicit and explicit, play central roles in this process through the creation of new genetic material that leads to increased synaptic efficiency through the creation of new neuronal connections. Although there is substantial…

Arteriovenous fistula creation may slow estimated glomerular filtration rate trajectory

PubMed Central

Golper, Thomas A.; Hartle, Phillip Matthew; Bian, Aihua

2015-01-01

Background We practice the timely placement of an arteriovenous fistula (AVF) in patients facing chronic hemodialysis. We have anecdotally observed after AVF creation that there appears to be a slowing of the decline in kidney function as measured by the estimated glomerular filtration rate (eGFR). There are physiologically plausible explanations as to how an AVF might alter kidney function, but this clinical observation has been attributed to improved compliance and/or other practices. The present retrospective observational analysis was performed to assess the possibility that a successfully created AVF could be associated with the slowing of the eGFR trajectory. Methods We identified 123 patients between 2005 and 2010 with at least two eGFR determinations for 2 years before and up to 2 years after AVF creation. Inclusion eligibility was that the fistula was maturing by the nephrologists' initial post-creation examination. Termination events were death, starting dialysis or transplantation. Each subject served as their own control for the pre- and post-AVF-creation eGFR measurements. Results Subjects' median age was 68 years and 56% were diabetic. The rate of change of the eGFR for the 2 years prior to AVF creation was −5.9 mL/min/year (95% CI: −5.3, −6.5) and after AVF creation −0.5 mL/min/year (95% CI: −1.1, 0.1) (interaction (P < 0.001). Conclusions A functioning AVF may be associated with a slowing of the eGFR decline. Agreeing to timely AVF creation selects patients in an otherwise typical population and other confounders have not yet been eliminated. To do so a thorough prospective observational study is indicated. PMID:25888388

Arteriovenous fistula creation may slow estimated glomerular filtration rate trajectory.

PubMed

Golper, Thomas A; Hartle, Phillip Matthew; Bian, Aihua

2015-12-01

We practice the timely placement of an arteriovenous fistula (AVF) in patients facing chronic hemodialysis. We have anecdotally observed after AVF creation that there appears to be a slowing of the decline in kidney function as measured by the estimated glomerular filtration rate (eGFR). There are physiologically plausible explanations as to how an AVF might alter kidney function, but this clinical observation has been attributed to improved compliance and/or other practices. The present retrospective observational analysis was performed to assess the possibility that a successfully created AVF could be associated with the slowing of the eGFR trajectory. We identified 123 patients between 2005 and 2010 with at least two eGFR determinations for 2 years before and up to 2 years after AVF creation. Inclusion eligibility was that the fistula was maturing by the nephrologists' initial post-creation examination. Termination events were death, starting dialysis or transplantation. Each subject served as their own control for the pre- and post-AVF-creation eGFR measurements. Subjects' median age was 68 years and 56% were diabetic. The rate of change of the eGFR for the 2 years prior to AVF creation was -5.9 mL/min/year (95% CI: -5.3, -6.5) and after AVF creation -0.5 mL/min/year (95% CI: -1.1, 0.1) (interaction (P < 0.001). A functioning AVF may be associated with a slowing of the eGFR decline. Agreeing to timely AVF creation selects patients in an otherwise typical population and other confounders have not yet been eliminated. To do so a thorough prospective observational study is indicated. © The Author 2015. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Individual surgeon practice is the most important factor influencing diverting loop ileostomy creation for patients undergoing sigmoid colectomy for diverticulitis.

PubMed

Benlice, Cigdem; Delaney, Conor P; Liska, David; Hrabe, Jennifer; Steele, Scott; Gorgun, Emre

2018-03-01

To identify factors associated with diverting ileostomy creation (DLI) in patients undergoing sigmoid colectomy for diverticular disease in a high volume colorectal unit and to obtain information for better preoperative patient counseling. Patients who underwent sigmoid colectomy with colorectal anastomosis with or without DLI for diverticulitis between 01/1994-12/2014 were identified. Preoperative characteristics, surgeon practice year, individual surgeon and postoperative outcomes were compared between patients with DLI or not. 1320 patients were identified and DLI was created in 204 (15.4%) patients. DLI creation was associated with older age (p < 0.001), female gender (p = 0.01), higher ASA-class (p < 0.001), hypertension (p = 0.01), DM(p < 0.001), renal comorbidities (p < 0.001), preoperative steroid use (p = 0.03), preoperative anemia (p = 0.004), and open surgery (p < 0.001). While ileostomy creation rates did not vary over the years during the study period or with increased surgeons' experience, surgeon identity had significant impact on ileostomy creation (Rate range 6.8-60.7%, p < 0.001). Multivariate logistic regression analysis revealed that individual surgeon, open approach, preoperative steroid use, and disease-related factors remained independently associated with DLI creation. Individual surgeon's practice affects the rate of diverting ileostomy creation in patients undergoing sigmoid colectomy for diverticular disease. Copyright © 2017 Elsevier Inc. All rights reserved.

The relationship of high school students' attitudes towards creation and evolution with the students' worldview philosophy

NASA Astrophysics Data System (ADS)

Ray, Donald David, Jr.

This prospectus examines the relationship of high school students' attitudes toward creation and evolution with the student's worldview philosophy. Chapter 1 presents the purpose of the research, which is to discover if there is a positive correlation in the relationship of high school students' attitudes toward creation and evolution and other aspects of worldview such as politics, economics, education, religion, and social issues. Also, the study will examine the frequency and comparative magnitude of the worldviews of homeschool, public school and Christian school students. Chapter 2 surveys precedents in the literature that are appropriate to the study. The significant literature to the study begins with the analysis of the relevant theological presuppositions pertaining to the topics of creation, evolution, and worldview. The analysis then moves to the literature on the relevant educational assumptions, which include theories, philosophies and practices related to high school students' attitudes toward creation and evolution with worldviews. Chapter 3 describes the methodological design for the study. Included in the chapter are the selection and profile of the sample, the selection and development of the instruments, namely the Creationist Worldview Test developed by Steve Deckard, and the PEERS Test---a worldview opinion survey developed by the Nehemiah Institute. Finally, the step-by-step protocol used in gathering the data completes the section. Chapter 4 presents the analysis of the data developed from the responses to the Creationist Worldview Test and the PEERS Test provided by the Nehemiah Institute and by the researcher. Profiles of each of the subgroups will be provided along with comparative analysis of the profiles. Concluding the chapter are summaries of profiles and comparative analysis. Chapter 5 presents a summary of the data describes the relationship of high school students' attitudes toward creation and evolution with the student's worldview philosophy. In addition, the major findings and general conclusions from the data are provided. The chapter concludes with recommendations for further research in this correlational analysis of origins.

Searches for magnetic monopoles with IceCube

NASA Astrophysics Data System (ADS)

Pollmann, Anna

2018-01-01

Particles that carry a magnetic monopole charge are proposed by various theories which go beyond the Standard Model of particle physics. The expected mass of magnetic monopoles varies depending on the theory describing its origin, generally the monopole mass far exceeds those which can be created at accelerators. Magnetic monopoles gain kinetic energy in large scale galactic magnetic fields and, depending on their mass, can obtain relativistic velocities. IceCube is a high energy neutrino detector using the clear ice at the South Pole as a detection medium. As monopoles pass through this ice they produce optical light by a variety of mechanisms. With increasing velocity, they produce light by catalysis of baryon decay, luminescence in the ice associated with electronic excitations, indirect and direct Cherenkov light from the monopole track, and Cherenkov light from cascades induced by pair creation and photonuclear reactions. By searching for this light, current best limits for the monopole flux over a broad range of velocities was achieved using the IceCube detector. A review of these magnetic monopole searches is presented.

Microscopic Origins of Shear Jamming for 2D Frictional Grains

NASA Astrophysics Data System (ADS)

Wang, Dong; Ren, Jie; Dijksman, Joshua A.; Zheng, Hu; Behringer, Robert P.

2018-05-01

Shear jamming (SJ) occurs for frictional granular materials with packing fractions ϕ in ϕS<ϕ <ϕJ0, when the material is subject to shear strain γ starting from a force-free state. Here, ϕJμ is the isotropic jamming point for particles with a friction coefficient μ . SJ states have mechanically stable anisotropic force networks, e.g., force chains. Here, we investigate the origins of SJ by considering small-scale structures—trimers and branches—whose response to shear leads to SJ. Trimers are any three grains where the two outer grains contact a center one. Branches occur where three or more quasilinear force chain segments intersect. Certain trimers respond to shear by compressing and bending; bending is a nonlinear symmetry-breaking process that can push particles in the dilation direction faster than the affine dilation. We identify these structures in physical experiments on systems of two-dimensional frictional discs, and verify their role in SJ. Trimer bending and branch creation both increase Z above Ziso≃3 needed for jamming 2D frictional grains, and grow the strong force network, leading to SJ.

CORRELATION OF CHANDRA PHOTONS WITH THE RADIO GIANT PULSES FROM THE CRAB PULSAR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bilous, A. V.; McLaughlin, M. A.; Kondratiev, V. I.

2012-04-10

No apparent correlation was found between giant pulses (GPs) and X-ray photons from the Crab pulsar during 5.4 hr of simultaneous observations with the Green Bank Telescope at 1.5 GHz and Chandra X-Ray Observatory primarily in the energy range of 1.5-4.5 keV. During the Crab pulsar periods with GPs, the X-ray flux in radio emission phase windows does not change more than by {+-}10% for main pulse (MP) GPs and {+-}30% for interpulse (IP) GPs. During GPs themselves, the X-ray flux does not change by more than two times for MP GPs and five times for IP GPs. All limitsmore » quoted are compatible with 2{sigma} fluctuations of the X-ray flux around the sets of false GPs with random arrival times. The results speak in favor of changes in plasma coherence as the origin of GPs. However, the results do not rule out variations in the rate of particle creation if the particles that emit coherent radio emission are mostly at the lowest Landau level.« less

Creation and Distribution of CAIs in the Protoplanetary Nebula

NASA Technical Reports Server (NTRS)

Cuzzi, J. N.; Davis, S. S.; Dobrovolskis, A. R.

2003-01-01

CaAl rich refractory mineral inclusions (CAIs) found at 1 - 10% mass fraction in primitive chondrites appear to be several million years older than the dominant (chondrule) components in the same parent bodies. A prevalent concern is that it is difficult to retain CAIs for this long against gas-drag-induced radial drift into the sun. We assess a hot inner (turbulent) nebula context for CAI formation, using analytical models of nebula evolution and particle diffusion. We show that outward radial diffusion in a weakly turbulent nebula can prevent significant numbers of CAI-size particles from being lost into the sun for times of 1 - 3 x 10(exp 6) years. To match the CAI abundances quantitatively, we advocate an enhancement of the inner hot nebula in silicate-forming material, due to rapid inward migration of very primitive, silicate and carbon rich, meter-sized objects. 'Combustion' of the carbon into CO would make the CAI formation environment more reduced than solar, as certain observations imply. Abundant CO might also play a role in mass-independent chemical fractionation of oxygen isotopes as seen in CAIs and associated primitive, high-temperature condensates.

Investigation of soft component in cosmic ray detection

NASA Astrophysics Data System (ADS)

Oláh, László; Varga, Dezső

2017-07-01

Cosmic ray detection is a research area which finds various applications in tomographic imaging of large size objects. In such applications, the background sources which contaminate cosmic muon signal require a good understanding of the creation processes, as well as reliable simulation frameworks with high predictive power are needed. One of the main background source is the ;soft component;, that is electrons and positrons. In this paper a simulation framework based on GEANT4 has been established to pin down the key features of the soft component. We have found that the electron and positron flux shows a remarkable invariance against various model parameters including the muon emission altitude or primary particle energy distribution. The correlation between simultaneously arriving particles have been quantitatively investigated, demonstrating that electrons and positrons tend to arrive within a close distance and with low relative angle. This feature, which is highly relevant for counting detectors, has been experimentally verified under open sky and at shallow depth underground. The simulation results have been compared to existing other measurements as well as other simulation programs.

Systematic Study of Highly Asymmetric Systems Using π0, h± and ϕ Production at PHENIX

NASA Astrophysics Data System (ADS)

Novitzky, N.; Phenix Collaboration

2017-11-01

The observation of long range correlations in highly asymmetric systems, as in p+Pband d+Aucollisions, suggests a creation of a medium with collective behavior. Furthermore, hints of gluon saturation effects have been observed at forward rapidities in d+Aucollisions at RHIC. Single particle production has proven to be a valuable tool to probe the quark-gluon plasma in heavy-ion collisions as it is sensitive to energy loss, modifications of the nuclear wave function, and the dynamics of the projectile wave function. In order to systematically study these highly asymmetric collisions, RHIC provided beams for p+Al, p+Au, d+Auand 3He+Aucollisions. We present the new measurements of π0 at mid-rapidity (| η | < 0.35) in p+Auand 3He+Aucollisions at √{sNN} = 200 GeV; and the charged hadron and ϕ production in forward (1.2 < η < 2.4) and backward (- 2.2 < η < - 1.2) rapidities in p+Al, p+Auand 3He+Aucollisions at √{sNN} = 200 GeV.

Jet Interactions in a Feedback-Free Fluidic Oscillator in the Transition Region

NASA Astrophysics Data System (ADS)

Tomac, Mehmet; Gregory, James

2013-11-01

The details of the jet interactions and oscillation mechanism of a feedback-free type fluidic oscillator are studied in this work. Flow rate-frequency measurements indicate the existence of three distinct operating regimes: low flow rate, transition, and high flow rate regions. This study presents results from the transition regime, extracted by using refractive index-matched particle image velocimetry (PIV). A newly-developed sensor configuration for frequency measurements in the refractive index-matched fluid and a phase-averaging method that minimizes jitter will be discussed. Experimental results indicate that the interactions of the two jets create three main vortices in the mixing chamber. One vortex vanishes and forms depending on the oscillation phase and plays a key role in the oscillation mechanism. The other two vortices sustain their existence throughout the oscillation cycle; however, both continuously change their size and strength. The resulting complex flow field with self-sustained oscillations is a result of the combination of many interesting phenomena such as jet interactions and bifurcations, viscous effects, vortex-shear layer interactions, vortex-wall interactions, instabilities, and saddle point creations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chumacero, E. Miguel; De Celis Alonso, B.; Martínez Hernández, M. I.

The development in semiconductor CMOS technology has enabled the creation of sensitive detectors for a wide range of ionizing radiation. These devices are suitable for photon counting and can be used in imaging and tomography X-ray diagnostics. The Medipix[1] radiation detection system is a hybrid silicon pixel chip developed for particle tracking applications in High Energy Physics. Its exceptional features (high spatial and energy resolution, embedded ultra fast readout, different operation modes, etc.) make the Medipix an attractive device for applications in medical imaging. In this work the energy characterization of a third-generation Medipix chip (Medipix3) coupled to a siliconmore » sensor is presented. We used different radiation sources (strontium 90, iron 55 and americium 241) to obtain the response curve of the hybrid detector as a function of energy. We also studied the contrast of the Medipix as a measure of pixel noise. Finally we studied the response to fluorescence X rays from different target materials (In, Pd and Cd) for the two data acquisition modes of the chip; single pixel mode and charge summing mode.« less

Production of refractory chamotte particle-reinforced geopolymer composite

NASA Astrophysics Data System (ADS)

Kovářík, T.; Kullová, L.; Rieger, D.

2016-04-01

Geopolymer resins are obtained by alkaline activation of aluminosilicate sources where raw calcined clays are one of the suitable potentialities. Besides the fact that chemical composition has an essential effect on final properties of the geopolymer binder, the type of filler strongly affected resulting properties of such granular composite. However, very few comparative studies have been done on detail description of composite systems: binder - granular filler, in relation to aggregate gradation design and rheology properties of the mixture. The aim of this work is to develop and describe granular composite concerning workability of the mixture and kinetics of geopolymerization/polycondensation through flow behaviour. The rheological measurements indicated that initial viscosities of the mixtures and their evolution are different for various proportions of the filler. Moreover, it was demonstrated that increase in complex viscosity responds to the creation of chemical bonds and the formation of structural network. Finally, a correlation of the mechanism of geopolymer formation was carried out by differential scanning calorimetry (DSC).

Improving atomic displacement and replacement calculations with physically realistic damage models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nordlund, Kai; Zinkle, Steven J.; Sand, Andrea E.

Atomic collision processes are fundamental to numerous advanced materials technologies such as electron microscopy, semiconductor processing and nuclear power generation. Extensive experimental and computer simulation studies over the past several decades provide the physical basis for understanding the atomic-scale processes occurring during primary displacement events. The current international standard for quantifying this energetic particle damage, the Norgett-Robinson-Torrens displacements per atom (NRT-dpa) model, has nowadays several well-known limitations. In particular, the number of radiation defects produced in energetic cascades in metals is only ~1/3 the NRT-dpa prediction, while the number of atoms involved in atomic mixing is about a factor ofmore » 30 larger than the dpa value. Here we propose two new complementary displacement production estimators (athermal recombination corrected dpa, arc-dpa) and atomic mixing (replacements per atom, rpa) functions that extend the NRT-dpa by providing more physically realistic descriptions of primary defect creation in materials and may become additional standard measures for radiation damage quantification.« less

Improving atomic displacement and replacement calculations with physically realistic damage models

DOE PAGES

Nordlund, Kai; Zinkle, Steven J.; Sand, Andrea E.; ...

2018-03-14

Atomic collision processes are fundamental to numerous advanced materials technologies such as electron microscopy, semiconductor processing and nuclear power generation. Extensive experimental and computer simulation studies over the past several decades provide the physical basis for understanding the atomic-scale processes occurring during primary displacement events. The current international standard for quantifying this energetic particle damage, the Norgett-Robinson-Torrens displacements per atom (NRT-dpa) model, has nowadays several well-known limitations. In particular, the number of radiation defects produced in energetic cascades in metals is only ~1/3 the NRT-dpa prediction, while the number of atoms involved in atomic mixing is about a factor ofmore » 30 larger than the dpa value. Here we propose two new complementary displacement production estimators (athermal recombination corrected dpa, arc-dpa) and atomic mixing (replacements per atom, rpa) functions that extend the NRT-dpa by providing more physically realistic descriptions of primary defect creation in materials and may become additional standard measures for radiation damage quantification.« less

Conference Grant Proposal for ICOPS 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Safronova, Alla

ICOPS (International Conference on Plasma Science) is an internationally renowned, well-attended annual conference that involves topics of direct interest to the Office of Fusion Energy Sciences of Department of Energy. In particular, ICOPS 2016 emphasized both the traditional areas of plasma science and the new areas of growth that include but are not limited to Fusion (Inertial, Magnetic and Alternate Concepts), Particle Acceleration with Laser and Beams, High Energy Density Matter, Laser Produced Plasma, Fast Z-pinches, Computational Plasma Physics, Plasma Diagnostics, and such frontiers as studying Warm Dense Matter using the X-ray free electron lasers. The travel support of themore » students at ICOPS comes usually from sponsor organizations. Increasing the participation of outstanding students at ICOPS 2016 who are the first authors of the abstracts and are selected to receive the travel support based on the scientific merit of the submitted abstracts is crucial for the creation of the new generation of the plasma physicists.« less

Improving atomic displacement and replacement calculations with physically realistic damage models.

PubMed

Nordlund, Kai; Zinkle, Steven J; Sand, Andrea E; Granberg, Fredric; Averback, Robert S; Stoller, Roger; Suzudo, Tomoaki; Malerba, Lorenzo; Banhart, Florian; Weber, William J; Willaime, Francois; Dudarev, Sergei L; Simeone, David

2018-03-14

Atomic collision processes are fundamental to numerous advanced materials technologies such as electron microscopy, semiconductor processing and nuclear power generation. Extensive experimental and computer simulation studies over the past several decades provide the physical basis for understanding the atomic-scale processes occurring during primary displacement events. The current international standard for quantifying this energetic particle damage, the Norgett-Robinson-Torrens displacements per atom (NRT-dpa) model, has nowadays several well-known limitations. In particular, the number of radiation defects produced in energetic cascades in metals is only ~1/3 the NRT-dpa prediction, while the number of atoms involved in atomic mixing is about a factor of 30 larger than the dpa value. Here we propose two new complementary displacement production estimators (athermal recombination corrected dpa, arc-dpa) and atomic mixing (replacements per atom, rpa) functions that extend the NRT-dpa by providing more physically realistic descriptions of primary defect creation in materials and may become additional standard measures for radiation damage quantification.

Ileostomy creation in colorectal cancer surgery: risk of acute kidney injury and chronic kidney disease.

PubMed

Li, Linda; Lau, Kelsey S; Ramanathan, Venkat; Orcutt, Sonia T; Sansgiry, Shubhada; Albo, Daniel; Berger, David H; Anaya, Daniel A

2017-04-01

Ileostomy creation is associated with postoperative dehydration and readmission; however, the effect on renal function is unknown. Our goal was to characterize the impact of ileostomy creation on acute and chronic renal function. A retrospective cohort study with patients undergoing colorectal cancer surgery at a tertiary referral institution (2005-2011). The relationship between ileostomy creation and acute kidney injury (AKI)-related readmission, severe chronic kidney disease (CKD) at 12 mo (glomerular filtration rate <30 mL/min/1.73 m 2 ), and onset of severe CKD over time was evaluated using multivariable logistic and Cox regression and adjusted using propensity score stratification. Among 619 patients, 84 (13%) had ileostomy. AKI-related readmission and severe CKD at 12 mo were more common among ileostomy patients (17% versus 2%, P < 0.01 and 13.3% versus 5%, P = 0.02, respectively). After propensity score adjustment, ileostomy was a significant predictor of AKI-related readmissions (odds ratio: 10.3; 95% confidence interval [CI], 3.9-27.2), severe CKD at 12 mo (odds ratio: 4.1; 95% CI, 1.4-11.9), and onset of severe CKD over time (hazard ratio: 4.2; 95% CI, 2.3-6.6). Ileostomy creation is associated with increased risk of AKI-related readmissions and development of severe CKD. Future studies must focus on strategies to minimize kidney injury when ileostomy is a necessary component of colorectal cancer surgery and revisiting current indications for ileostomy creation. Copyright © 2016 Elsevier Inc. All rights reserved.

Nanocidals therapy for osteomyelitis

NASA Astrophysics Data System (ADS)

Qadri, Shahnaz Majid

Infection is a major medical problem that causes serious complications including patient death. The mortality rate of invasive infection has reduced significantly since the introduction of antibiotherapy. However, the resistance to antibiotic is becoming a serious medical problem that resulted in high medical cost. The overall aim of this study is to evaluate a potential inorganic route (metalo-antibiotic) to treat localized infections that require long-term antibiotic treatment combined with medical and surgical intervention. In this study osteomyelitis (bone infection) was selected as a model to evaluate the inorganic route to treat infection. Osteomyelitis is a progressive infection that could result in amputation and patient death. The metalo-antibiotics are faster to develop than antibiotics and have shown great efficacy against a wide range of bacterial infection. A unique composition of particles with ability to extend their residual efficacy on bacteria for an extended time compared to conventional antibiotics was synthesized and evaluated in this study. The in vitro experiments demonstrated the metalo-antibiotics to treat cellular internal infections without damaging the home cell. The in vivo toxicity experiments demonstrated a tolerance of the particles for doses that are 20 times higher than the anticipated treatment dose. A murine mouse model for osteomyelitis was developed. The efficacy of the metalo-antibiotics on the induced osteomyelitis was evaluated. A significant decrease in infection in the bones treated with nanoparticles was observed. By delivering optimal concentration of nanoparticles in mouse models there was no sign of pathology seen in mouse. Overall, this study has two main impacts: a) creation of inorganic routes to fight against bacterial infection particularly those requiring long-term antibiotic or surgical treatment b) reduction of critical technical risk through generation of pre-clinical data of the employment of inorganic antibacterial complexes.

The Relationships Between Paranormal Belief, Creationism, Intelligent Design and Evolution at Secondary Schools in Vienna (Austria)

NASA Astrophysics Data System (ADS)

Eder, Erich; Turic, Katharina; Milasowszky, Norbert; van Adzin, Katherine; Hergovich, Andreas

2011-05-01

The present study is the first to investigate the relationships between a multiple set of paranormal beliefs and the acceptance of evolution, creationism, and intelligent design, respectively, in Europe. Using a questionnaire, 2,129 students at secondary schools in Vienna (Austria) answered the 26 statements of the Revised Paranormal Belief Scale (R-PBS) and three statements about naturalistic evolution, creationism and intelligent design (ID). The investigated Austrian students showed an average R-PBS score of 82.08, more than 50% of them agreed with naturalistic evolution, 28% with creationism, and more than a third agreed with ID, the latter two closely correlated with each other. Females generally showed higher belief scores in the paranormal, creationism and ID. The agreement with naturalistic evolution correlated negatively with religious belief, but not with other paranormal beliefs, whereas the two non-scientific alternatives to evolution significantly correlated with both traditional and paranormal beliefs. Religious belief showed a significant positive correlation with other paranormal beliefs. All subscales of paranormal belief decreased during the eight grades of secondary school, as did acceptance of creationism and ID. However, the acceptance of naturalistic evolution did not correlate with age or grade. Possible reasons and implications for science education and the biology curriculum at Austrian secondary schools are discussed.

Polishing the craft of genetic diversity creation in directed evolution.

PubMed

Tee, Kang Lan; Wong, Tuck Seng

2013-12-01

Genetic diversity creation is a core technology in directed evolution where a high quality mutant library is crucial to its success. Owing to its importance, the technology in genetic diversity creation has seen rapid development over the years and its application has diversified into other fields of scientific research. The advances in molecular cloning and mutagenesis since 2008 were reviewed. Specifically, new cloning techniques were classified based on their principles of complementary overhangs, homologous sequences, overlapping PCR and megaprimers and the advantages, drawbacks and performances of these methods were highlighted. New mutagenesis methods developed for random mutagenesis, focused mutagenesis and DNA recombination were surveyed. The technical requirements of these methods and the mutational spectra were compared and discussed with references to commonly used techniques. The trends of mutant library preparation were summarised. Challenges in genetic diversity creation were discussed with emphases on creating "smart" libraries, controlling the mutagenesis spectrum and specific challenges in each group of mutagenesis methods. An outline of the wider applications of genetic diversity creation includes genome engineering, viral evolution, metagenomics and a study of protein functions. The review ends with an outlook for genetic diversity creation and the prospective developments that can have future impact in this field. © 2013. Published by Elsevier Inc. All rights reserved.

Percutaneous Creation of a Central Iliac Arteriovenous Anastomosis for the Treatment of Arterial Hypertension.

PubMed

Bertog, Stefan C; Sobotka, Nathan A; Sobotka, Paul A; Lobo, Melvin D; Sievert, Kolja; Vaskelyte, Laura; Sievert, Horst; Schmieder, Roland E

2018-03-19

Provision of a summary on the physiologic effects of arteriovenous fistula creation and description of previously published human data on the efficacy of a percutaneously implanted device creating an arteriovenous fistula. Though antihypertensive therapy is effective, some patient's blood pressure remains poorly controlled despite adherence to optimal medical therapy. Moreover, some patients are not compliant with recommended medical therapy due to side effects or personal decision. This has prompted exploration of alternative, device-based antihypertensive therapies including, among others, the percutaneous creation of an arteriovenous fistula. An arteriovenous fistula is accompanied by a number of favorable physiologic changes that may lower blood pressure. These physiologic changes, conduction of the procedure, and previously published human experience are summarized in this review article. The results of a recently published trial comparing arteriovenous fistula creation and standard antihypertensive therapy versus standard antihypertensive therapy alone are summarized. Creation of an arteriovenous fistula is accompanied by a significant blood pressure reduction likely related to a reduction in total arterial resistance, perhaps blood volume reduction, inhibition of the baroreceptor reflex, and release of natriuretic peptides. These findings foster further interest in studying the impact of an arteriovenous fistula and arterial blood pressure. The design of a large randomized trial comparing arteriovenous fistula creation to sham control is outlined.

Phase space methods for Majorana fermions

NASA Astrophysics Data System (ADS)

Rushin Joseph, Ria; Rosales-Zárate, Laura E. C.; Drummond, Peter D.

2018-06-01

Fermionic phase space representations are a promising method for studying correlated fermion systems. The fermionic Q-function and P-function have been defined using Gaussian operators of fermion annihilation and creation operators. The resulting phase-space of covariance matrices belongs to the symmetry class D, one of the non-standard symmetry classes. This was originally proposed to study mesoscopic normal-metal-superconducting hybrid structures, which is the type of structure that has led to recent experimental observations of Majorana fermions. Under a unitary transformation, it is possible to express these Gaussian operators using real anti-symmetric matrices and Majorana operators, which are much simpler mathematical objects. We derive differential identities involving Majorana fermion operators and an antisymmetric matrix which are relevant to the derivation of the corresponding Fokker–Planck equations on symmetric space. These enable stochastic simulations either in real or imaginary time. This formalism has direct relevance to the study of fermionic systems in which there are Majorana type excitations, and is an alternative to using expansions involving conventional Fermi operators. The approach is illustrated by showing how a linear coupled Hamiltonian as used to study topological excitations can be transformed to Fokker–Planck and stochastic equation form, including dissipation through particle losses.

Creationism as Science: What Every Teacher-Scientist Should Know.

ERIC Educational Resources Information Center

Gatzke, Ken W.

1985-01-01

Addresses philosophical problems of the evolution/creationism debate (including underlying assumptions of creationism and nature of science), suggesting that creationism cannot be presented as science in science courses because it fails to qualify as a science. Prediction and explanation, absolute creationism, and a fundamental difficulty in…

Curiosity and Its Role in Cross-Cultural Knowledge Creation

ERIC Educational Resources Information Center

Mikhaylov, Natalie S.

2016-01-01

This paper explores the role of curiosity in promoting cross-cultural knowledge creation and competence development. It is based on a study with four international higher educational institutions, all of which offer management and business education for local and international students. The reality of multicultural and intercultural relationships…

The Teaching of Evolution and Creationism in Minnesota

ERIC Educational Resources Information Center

Moore, Randy; Kraemer, Karen

2005-01-01

The evolution-related attitudes and actions of Minnesota high school biology teachers were studied to estimate the prevalence of creationism among biology teachers. Minnesota's high school biology teachers were questioned about the evolution education in public schools regarding the percentage of biology teachers who teach evolution, class-time…

Creation of Audiovisual Presentations as a Tool to Develop Key Competences in Secondary-School Students. A Case Study in Science Class

ERIC Educational Resources Information Center

Ezquerra, Ángel; Manso, Javier; Burgos, Mª Esther; Hallabrin, Carla

2014-01-01

New curricular plans based on key competences create the need for new educational proposals that allow their development. This article describes a proposal to develop key competences through project-based learning. The project's objective is the creation of a digital video. The following study was carried out with students in their final two years…

Information Technology Tools Analysis in Quantitative Courses of IT-Management (Case Study: M.Sc.-Tehran University)

ERIC Educational Resources Information Center

Eshlaghy, Abbas Toloie; Kaveh, Haydeh

2009-01-01

The purpose of this study was to determine the most suitable ICT-based education and define the most suitable e-content creation tools for quantitative courses in the IT-management Masters program. ICT-based tools and technologies are divided in to three categories: the creation of e-content, the offering of e-content, and access to e-content. In…

Histopathology of Veins Obtained at Hemodialysis Arteriovenous Fistula Creation Surgery.

PubMed

Alpers, Charles E; Imrey, Peter B; Hudkins, Kelly L; Wietecha, Tomasz A; Radeva, Milena; Allon, Michael; Cheung, Alfred K; Dember, Laura M; Roy-Chaudhury, Prabir; Shiu, Yan-Ting; Terry, Christi M; Farber, Alik; Beck, Gerald J; Feldman, Harold I; Kusek, John W; Himmelfarb, Jonathan

2017-10-01

Stenosis from venous neointimal hyperplasia is common in native arteriovenous fistulas (AVFs). However, the preexisting histologic characteristics of veins at fistula creation, and associations thereof with baseline patient factors, have not been well characterized. In this study, we conducted histologic analysis of a segment of the vein used for anastomosis creation, obtained during AVF creation from 554 of the 602 participants in the multicenter Hemodialysis Fistula Maturation Cohort Study. We quantified intimal and medial areas and lengths of the internal and external elastic lamina by morphometry and assessed venous wall cells by immunohistochemistry, extracellular matrix with Movat stain, and calcium deposition by alizarin red stain. We also studied a representative subset of veins for markers of monocyte/macrophage content, cell proliferation, apoptosis, and neoangiogenesis. Neointima occupied >20% of the lumen in 57% of fully circumferential vein samples, and neointimal hyperplasia associated positively with age and inversely with black race. The neointima was usually irregularly thickened, sometimes concentric, and contained α -smooth muscle actin-expressing cells of smooth muscle or myofibroblast origin. Proteoglycans admixed with lesser amounts of collagen constituted the predominant matrix in the neointima. In 82% of vein samples, the media of vessel walls contained large aggregates of collagen. A minority of veins expressed markers of inflammation, cell proliferation, cell death, calcification, or neoangiogenesis. In conclusion, we observed preexisting abnormalities, including neointimal hyperplasia and prominent accumulation of extracellular matrix, in veins used for AVF creation from a substantial proportion of this cohort. Copyright © 2017 by the American Society of Nephrology.

Transgenic mice: an irreplaceable tool for the study of mammalian development and biology.

PubMed

Babinet, C

2000-11-01

Stable integration into the mouse genome of exogenous genetic information, i.e., the creation of transgenic mice, has become a privileged way of analyzing gene function in normal development and pathology. Both gene addition and gene replacement may be performed. This has allowed, in particular, the creation of mice in which precise mutations are introduced into a given gene. Furthermore, in recent years, strategies that induce the expression of a mutation in a given type of cell and/or at a given time in development have been developed. Thus, the transgenic methodology affords a unique and irreplaceable tool for the study of mammalian development and biology and for the creation of animal models for human genetic diseases.

How beliefs about self-creation inflate value in the human brain.

PubMed

Koster, Raphael; Sharot, Tali; Yuan, Rachel; De Martino, Benedetto; Norton, Michael I; Dolan, Raymond J

2015-01-01

Humans have a tendency to overvalue their own ideas and creations. Understanding how these errors in judgement emerge is important for explaining suboptimal decisions, as when individuals and groups choose self-created alternatives over superior or equal ones. We show that such overvaluation is a reconstructive process that emerges when participants believe they have created an item, regardless of whether this belief is true or false. This overvaluation is observed both when false beliefs of self-creation are elicited (Experiment 1) or implanted (Experiment 2). Using brain imaging data we highlight the brain processes mediating an interaction between value and belief of self-creation. Specifically, following the creation manipulation there is an increased functional connectivity during valuation between the right caudate nucleus, where we show BOLD activity correlated with subjective value, and the left amygdala, where we show BOLD activity is linked to subjective belief. Our study highlights psychological and neurobiological processes through which false beliefs alter human valuation and in doing so throw light on a common source of error in judgements of value.

How beliefs about self-creation inflate value in the human brain

PubMed Central

Koster, Raphael; Sharot, Tali; Yuan, Rachel; De Martino, Benedetto; Norton, Michael I.; Dolan, Raymond J.

2015-01-01

Humans have a tendency to overvalue their own ideas and creations. Understanding how these errors in judgement emerge is important for explaining suboptimal decisions, as when individuals and groups choose self-created alternatives over superior or equal ones. We show that such overvaluation is a reconstructive process that emerges when participants believe they have created an item, regardless of whether this belief is true or false. This overvaluation is observed both when false beliefs of self-creation are elicited (Experiment 1) or implanted (Experiment 2). Using brain imaging data we highlight the brain processes mediating an interaction between value and belief of self-creation. Specifically, following the creation manipulation there is an increased functional connectivity during valuation between the right caudate nucleus, where we show BOLD activity correlated with subjective value, and the left amygdala, where we show BOLD activity is linked to subjective belief. Our study highlights psychological and neurobiological processes through which false beliefs alter human valuation and in doing so throw light on a common source of error in judgements of value. PMID:26388755

Planetesimal Initial Mass Functions and Creation Rates Under Turbulent Concentration Using Scale-Dependent Cascades

NASA Technical Reports Server (NTRS)

Cuzzi, J. N.; Hartlep, T.; Estrada, P.

2016-01-01

The initial accretion of primitive bodies from freely-floating nebula particles remains problematic. Traditional growth-by-sticking models in turbulent nebulae encounter a "meter-size barrier" due to both drift and destruction, or even a millimeter-to-centimeter-size "bouncing" barrier. Recent suggestions have been made that some "lucky" particles might be able to outgrow the collision and/or drift barriers, and lead to so-called "streaming instabilities" or SI. However, new full models of growth by sticking in the presence of radial drift show that lucky particles (the largest particles, at the tail of the size distribution, that grow beyond the nominal fragmentation and drift barriers) are far too rare to lead to any collective effects such as streaming or gravitational instabilities. Thus we need to focus on typical radii gamma(sub M) which contain most of the mass. Our models of disks with weak-to-moderate turbulence, which include all the most recent experimental constraints on collisional growth, erosion, bouncing, and fragmentation, as well as radial drift, find that growth stalls quite generally at sizes gamma(sub M) which are too small to settle into layers which are dense enough for any collective effects (streaming or gravitational instabilities) to arise. Even if growth by sticking could somehow breach the nominal barriers (perhaps if the actual sticking or strength is larger than current estimates for pure ice or pure silicate, with specific grain sizes), turbulent nebulae present subsequent formidable obstacles to incremental growth through the 1-10km size range. On the other hand, non-turbulent nebulae alpha is less than 10(Sup -4).

Views of Community Managers on Knowledge Co-creation in Online Communities for People With Disabilities: Qualitative Study

PubMed Central

Rubinelli, Sara

2017-01-01

Background The use of online communities to promote end user involvement and co-creation in the product and service innovation process is well documented in the marketing and management literature. Whereas online communities are widely used for health care service provision and peer-to-peer support, only little is known about how they could be integrated into the health care innovation process. Objective The overall objective of this qualitative study was to explore community managers’ views on and experiences with knowledge co-creation in online communities for people with disabilities. Methods A descriptive qualitative research design was used. Data were collected through semi-structured interviews with nine community managers. To complement the interview data, additional information was retrieved from the communities in the form of structural information (number of registered users, number and names of topic areas covered by the forum) and administrative information (terms and conditions and privacy statements, forum rules). Data were analyzed using thematic analysis. Results Our results highlight two main aspects: peer-to-peer knowledge co-creation and types of collaboration with external actors. Although community managers strongly encouraged peer-to-peer knowledge co-creation, our findings indicated that these activities were not common practice in the communities under investigation. In fact, much of what related to co-creation, prototyping, and product development was still perceived to be directed by professionals and experts. Community managers described the role of their respective communities as informing this process rather than a driving force. The role of community members as advisors to researchers, health care professionals, and businesses was discussed in the context of types of collaboration with external actors. According to the community managers, most of the external inquiries related to research projects of students or health care professionals in training, who often joined a community for the sole purpose of recruiting participants for their research. Despite this unilateral form of knowledge co-creation, community managers acknowledged the mere interest of these user groups as beneficial, as long as their interest was not purely financially motivated. Being able to contribute to advancing research, improving products, and informing the planning and design of health care services were described as some of the key motivations to engage with external stakeholders. Conclusions This paper draws attention to the currently under-investigated role of online communities as platforms for collaboration and co-creation between patients, health care professionals, researchers, and businesses. It describes community managers’ views on and experiences with knowledge co-creation and provides recommendations on how these activities can be leveraged to foster knowledge co-creation in health care. Engaging in knowledge co-creation with online health communities may ultimately help to inform the planning and design of products, services, and research activities that better meet the actual needs of those living with a disability. PMID:29017993

Views of Community Managers on Knowledge Co-creation in Online Communities for People With Disabilities: Qualitative Study.

PubMed

Amann, Julia; Rubinelli, Sara

2017-10-10

The use of online communities to promote end user involvement and co-creation in the product and service innovation process is well documented in the marketing and management literature. Whereas online communities are widely used for health care service provision and peer-to-peer support, only little is known about how they could be integrated into the health care innovation process. The overall objective of this qualitative study was to explore community managers' views on and experiences with knowledge co-creation in online communities for people with disabilities. A descriptive qualitative research design was used. Data were collected through semi-structured interviews with nine community managers. To complement the interview data, additional information was retrieved from the communities in the form of structural information (number of registered users, number and names of topic areas covered by the forum) and administrative information (terms and conditions and privacy statements, forum rules). Data were analyzed using thematic analysis. Our results highlight two main aspects: peer-to-peer knowledge co-creation and types of collaboration with external actors. Although community managers strongly encouraged peer-to-peer knowledge co-creation, our findings indicated that these activities were not common practice in the communities under investigation. In fact, much of what related to co-creation, prototyping, and product development was still perceived to be directed by professionals and experts. Community managers described the role of their respective communities as informing this process rather than a driving force. The role of community members as advisors to researchers, health care professionals, and businesses was discussed in the context of types of collaboration with external actors. According to the community managers, most of the external inquiries related to research projects of students or health care professionals in training, who often joined a community for the sole purpose of recruiting participants for their research. Despite this unilateral form of knowledge co-creation, community managers acknowledged the mere interest of these user groups as beneficial, as long as their interest was not purely financially motivated. Being able to contribute to advancing research, improving products, and informing the planning and design of health care services were described as some of the key motivations to engage with external stakeholders. This paper draws attention to the currently under-investigated role of online communities as platforms for collaboration and co-creation between patients, health care professionals, researchers, and businesses. It describes community managers' views on and experiences with knowledge co-creation and provides recommendations on how these activities can be leveraged to foster knowledge co-creation in health care. Engaging in knowledge co-creation with online health communities may ultimately help to inform the planning and design of products, services, and research activities that better meet the actual needs of those living with a disability. ©Julia Amann, Sara Rubinelli. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 10.10.2017.

Sauter-Schwinger pair creation dynamically assisted by a plane wave

NASA Astrophysics Data System (ADS)

Torgrimsson, Greger; Schneider, Christian; Schützhold, Ralf

2018-05-01

We study electron-positron pair creation by a strong and constant electric field superimposed with a weaker transversal plane wave which is incident perpendicularly (or under some angle). Comparing the fully nonperturbative approach based on the world-line instanton method with a perturbative expansion into powers of the strength of the weaker plane wave, we find good agreement—provided that the latter is carried out to sufficiently high orders. As usual for the dynamically assisted Sauter-Schwinger effect, the additional plane wave induces an exponential enhancement of the pair-creation probability if the combined Keldysh parameter exceeds a certain threshold.

A framework of knowledge creation processes in participatory simulation of hospital work systems.

PubMed

Andersen, Simone Nyholm; Broberg, Ole

2017-04-01

Participatory simulation (PS) is a method to involve workers in simulating and designing their own future work system. Existing PS studies have focused on analysing the outcome, and minimal attention has been devoted to the process of creating this outcome. In order to study this process, we suggest applying a knowledge creation perspective. The aim of this study was to develop a framework describing the process of how ergonomics knowledge is created in PS. Video recordings from three projects applying PS of hospital work systems constituted the foundation of process mining analysis. The analysis resulted in a framework revealing the sources of ergonomics knowledge creation as sequential relationships between the activities of simulation participants sharing work experiences; experimenting with scenarios; and reflecting on ergonomics consequences. We argue that this framework reveals the hidden steps of PS that are essential when planning and facilitating PS that aims at designing work systems. Practitioner Summary: When facilitating participatory simulation (PS) in work system design, achieving an understanding of the PS process is essential. By applying a knowledge creation perspective and process mining, we investigated the knowledge-creating activities constituting the PS process. The analysis resulted in a framework of the knowledge-creating process in PS.

Designing an Online Social Support Platform Through Co-Creation with Seniors.

PubMed

Rochat, Jessica; Nap, Henk Herman; Ricci, Arnaud; Cornelisse, Lotte; Lukkien, Dirk; Lovis, Christian; Ehrler, Frédéric

2018-01-01

The high number of seniors that feels excluded of society highlights the necessity to promote active ageing. This intention can be supported through online platforms that encourage participation in social activities. The goal of the present study was to identify design principles of online support platforms for seniors through focus groups and to ideate the platform through co-creation sessions. The results show that a social platform for seniors must, among other, help to foster contact between users, and must provide services and meaningful activities. A first mock-up of the platform's design has been created based on the co-creation sessions and will be iteratively evaluated and enhanced in future studies in four countries across Europe. Our findings are in line with those of other studies demonstrating that seniors attach importance to trustworthiness and need to maintain social ties.

Transverse Space-Charge Field-Induced Plasma Dynamics for Ultraintense Electron-Beam Characterization

NASA Astrophysics Data System (ADS)

Tarkeshian, R.; Vay, J. L.; Lehe, R.; Schroeder, C. B.; Esarey, E. H.; Feurer, T.; Leemans, W. P.

2018-04-01

Similarly to laser or x-ray beams, the interaction of sufficiently intense particle beams with neutral gases will result in the creation of plasma. In contrast to photon-based ionization, the strong unipolar field of a particle beam can generate a plasma where the electron population receives a large initial momentum kick and escapes, leaving behind unshielded ions. Measuring the properties of the ensuing Coulomb exploding ions—such as their kinetic energy distribution, yield, and spatial distribution—can provide information about the peak electric fields that are achieved in the electron beams. Particle-in-cell simulations and analytical models are presented for high-brightness electron beams of a few femtoseconds or even hundreds of attoseconds, and transverse beam sizes on the micron scale, as generated by today's free electron lasers. Different density regimes for the utilization as a potential diagnostics are explored, and the fundamental differences in plasma dynamical behavior for e-beam or photon-based ionization are highlighted. By measuring the dynamics of field-induced ions for different gas and beam densities, a lower bound on the beam charge density can be obtained in a single shot and in a noninvasive way. The exponential dependency of the ionization yield on the beam properties can provide unprecedented spatial and temporal resolution, at the submicrometer and subfemtosecond scales, respectively, offering a practical and powerful approach to characterizing beams from accelerators at the frontiers of performance.

Midtail plasma flows and the relationship to near-Earth substorm activity: A case study

NASA Technical Reports Server (NTRS)

Lopez, R. E.; Goodrich, C. C.; Reeves, G. D.; Belian, R. D.; Taktakishvili, A.

1994-01-01

Recent simulations of magnetotail reconnection have pointed to a link between plasma flows, dipolarization, and the substorm current wedge. In particular, Hesse and Birn (1991) have proposed that earthward jetting of plasma from the reconnection region transports flux into the near-Earth region. At the inner edge of the plasma sheet this flux piles up, producing a dipolarization of the magnetic field. The vorticity produced by the east-west deflection of the flow at the inner edge of the plasma sheet gives rise to field-aligned currents that have region 1 polarity. Thus in this scenario the earthward flow from the reconnection region produces the dipolarization ad the current wedge in a self-consistent fashion. In this study we examine observations made on April 8, 1985 by the Active Magnetospheric Particle Tracer Explorers (AMPTE)/Ion Release Module (IRM), the geosynchronous satellites 1979-053, 1983-019, and 1984-037, and Syowa station, as well as AE. This event is unique because IRM was located near the neutral sheet in the midnight sector for am extended period of time. Ground data show that there was ongoing activity in the IRM local time sector for several hours, beginning at 1800 UT and reaching a crescendo at 2300 UT. This activity was also accompanied by energetic particle variations, including injections, at geosynchronous orbit in the nighttime sector. Significantly, there were no fast flows at the neutral sheet until the great intensification of activity at 2300 UT. At that time, IRM recorded fast eartheard flow simultaneous with a dipolatization of the magetic field. We conclude that while the aforementioned scenario for the creation of the current wedge encounters serious problems explaining the earlier activity, the observations at 2300 UT are consistent with the scenario of Hesse and Birn (1191). On that basis it is argued that the physics of substorms is not exclusively rooted in the development of a global tearing mode. Processes at the inner edge of the cross-tail current that cause a disruption of the current and a consequent dipolarization and current wedge may be unrelated to the formation of a macroscale reconnection region. Thus the global evolution of a substorm is probably a complicated superposition of such processes operating on a very localized scale and a global macroscale process that allows for such things as releasing te energy stored in lobe flux and creation of plasmoids.

Solar test of Dirac's large number hypothesis. [multiplicative creation model for solar evolution

NASA Technical Reports Server (NTRS)

Chin, C.-W.; Stothers, R.

1975-01-01

An investigation is conducted regarding the implications of Dirac's theories (1973, 1974) concerning the creation of new matter. It is found that Dirac's theory of multiplicative creation, but not his theory of additive creation, is not in contradiction with known facts about the sun. According to the theory of additive creation, matter is formed uniformly throughout space. The concept of multiplicative creation implies that existing matter multiplies itself in proportion to the amount of matter already present.

Creation of dialysis vascular access with normal flow increases brain natriuretic peptide levels.

PubMed

Malík, Jan; Tuka, Vladimir; Krupickova, Zdislava; Chytilova, Eva; Holaj, Robert; Slavikova, Marcela

2009-12-01

Chronic heart failure is very common in hemodialyzed patients due to several factors such as intermittent volume overload, anemia, and hypertension. Dialysis access flow is usually considered to have a minor effect. We hypothesized that creation of dialysis access with "normal" flow would lead to elevation of B-type natriuretic peptide (BNP), which is a sensitive marker of heart failure. We included subjects with a newly created, well-functioning vascular access and normal left ventricular ejection fraction. They were examined before access creation (baseline), then again 6 weeks and 6 months after the surgery. Only subjects with access flow (Qa) < 1500 ml/min were included. Changes of BNP levels and their relation to access flow were studied. We examined 35 subjects aged 60.6 +/- 13.5 years. Qa was 789 +/- 361 and 823 +/- 313 ml/min at 6 weeks and 6 months after the surgery, respectively. Within 6 weeks after access creation, BNP rose from 217 (294) to 267 (550) ng/l (median (quartile range)) with P = 0.003. Qa was significantly related to BNP levels 6 weeks after access creation (r = 0.37, P = 0.036). Six months after access creation, there was only a trend of BNP decrease (235 (308) ng/l, P = 0.44). Creatinine, blood urea nitrogen and hemoglobin levels as well as patients' weight did not change significantly. Creation of dialysis access with "normal" flow volume leads to significant increase of BNP, which is related to the value of access flow. The increase of BNP probably mirrors worsening of clinically silent heart failure.

Study of deformation behavior, structure and mechanical properties of the AlSiMnFe alloy during ECAP-PBP.

PubMed

Naizabekov, A B; Andreyachshenko, V A; Kocich, Radim

2013-01-01

The presented article deals with the effects of equal channel angular pressing (ECAP) with a newly adjusted die geometry on the microstructure and mechanical properties of the Al-Si-Mn-Fe alloy. This alloy was subjected to two modes of heat treatment followed by the ECAP process, which led to partial back pressure (ECAP-PBP). Ultra-fine grained (UFG) structure formed through ECAP-PBP process has been studied by methods of optical as well as electron microscopy. The obtained results indicate that quenched alloys, in comparison to slowly cooled alloys, do not contain large brittle particles which subsequently initiate a premature creation of cracks. It was shown that the mechanical properties of these alloys after such processing depend first and foremost on the selected type of heat treatment and on the number of performed passes. The maximum of ultimate tensile strength (417 MPa) was obtained for quenched alloy after 3 passes. On the other hand, maximum ductility was found in slowly cooled alloy after second pass. Further passes reduced strength due to the brittle behavior of excluded particles. One of the partial findings is that there is only a small dependency of the resulting size of grains on previously applied thermal processing. The minimum grain sizes were obtained after 3 passages, where their size ranged between 0.4 and 0.8 μm. The application of quick cooling after heat processing due to the occurrence of finer precipitates in the matrix seems to produce better results. Copyright © 2012 Elsevier Ltd. All rights reserved.

The influence of ligand charge and length on the assembly of Brome mosaic virus derived virus-like particles with magnetic core

NASA Astrophysics Data System (ADS)

Mieloch, Adam A.; Krecisz, Monika; Rybka, Jakub D.; Strugała, Aleksander; Krupiński, Michał; Urbanowicz, Anna; Kozak, Maciej; Skalski, Bohdan; Figlerowicz, Marek; Giersig, Michael

2018-03-01

Virus-like particles (VLPs) have sparked a great interest in the field of nanobiotechnology and nanomedicine. The introduction of superparamagnetic nanoparticles (SPIONs) as a core, provides potential use of VLPs in the hyperthermia therapy, MRI contrast agents and magnetically-powered delivery agents. Magnetite NPs also provide a significant improvement in terms of VLPs stability. Moreover employing viral structural proteins as self-assembling units has opened a new paths for targeted therapy, drug delivery systems, vaccines design, and many more. In many cases, the self-assembly of a virus strongly depends on electrostatic interactions between positively charged groups of the capsid proteins and negatively charged nucleic acid. This phenomenon imposes the negative net charge as a key requirement for the core nanoparticle. In our experiments, Brome mosaic virus (BMV) capsid proteins isolated from infected plants Hordeum vulgare were used. Superparamagnetic iron oxide nanoparticles (Fe3O4) with 15 nm in diameter were synthesized by thermal decomposition and functionalized with COOH-PEG-PL polymer or dihexadecylphosphate (DHP) in order to provide water solubility and negative charge required for the assembly. Nanoparticles were characterized by Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS), Zeta Potential, Fourier Transformed Infrared Spectroscopy (FTIR) and Superconducting Quantum Interference Device (SQUID) magnetometry. TEM and DLS study were conducted to verify VLPs creation. This study demonstrates that the increase of negative surface charge is not a sufficient factor determining successful assembly. Additional steric interactions provided by longer ligands are crucial for the assembly of BMV SPION VLPs and may enhance the colloidal stability.

Organizing Hazards, Engineering Disasters? Improving the Recognition of Political-Economic Factors in the Creation of Disasters

ERIC Educational Resources Information Center

Freudenburg, William R.; Gramling, Robert; Laska, Shirley; Erikson, Kai T.

2008-01-01

Disaster studies have made important progress in recognizing the unequally distributed consequences of disasters, but there has been less progress in analyzing social factors that help create "natural" disasters. Even well-known patterns of hazard-creation tend to be interpreted generically--as representing "economic development" or…

Analysis of Bilateral Effects between Social Undermining and Co-Creation among University Faculty Members

ERIC Educational Resources Information Center

Taherpour, Fatima; Rajaeepour, Saeed; Siadat, Ali; Kazemi, Iraj

2016-01-01

Understanding the social undermining is increasing important in organizational literature both because of its relation with job performance and because of its collective cost to individuals and organizations. This article argued that social undermining can effect on co-creation among faculty members. The study adopted a descriptive-correlational…

Student Co-Creation Behavior in Higher Education: The Role of Satisfaction with the University Experience

ERIC Educational Resources Information Center

Elsharnouby, Tamer H.

2015-01-01

This study explores what constitutes students' satisfaction with university experience and examines the influence of overall satisfaction with the university experience on students' co-creation behavior-- namely, participation behavior and citizenship behavior. Drawing upon a sample of 379 students and using structural equation modeling, the…

Case Study: Collaborative Creation of an On-Line Degree Program

ERIC Educational Resources Information Center

Stewart, Barbara L.; Norwood, Marcella; Ezell, Shirley; Waight, Consuelo

2006-01-01

Faculty collaboratively developed an on-line Bachelor of Science degree in Consumer Science and Merchandising (CSM). Part-time faculty and technical support services supported the four-member team. Small grants assisted in the creation and redesign of all CSM major courses for on-line delivery. Issues of appropriate learning strategies, student…

Reading, the Arts, and the Creation of Meaning.

ERIC Educational Resources Information Center

Eisner, Elliot W., Ed.

The seven papers that comprise this book were presented at the 1977 National Art Education Association Conference on Reading, the Arts, and the Creation of Meaning held to bring together people in the arts and the fields of reading, psychology, and philosophy to explore the relationships that exist between these fields of study. Topics discussed…

A Co-Creation Blended KM Model for Cultivating Critical-Thinking Skills

ERIC Educational Resources Information Center

Yeh, Yu-chu

2012-01-01

Both critical thinking (CT) and knowledge management (KM) skills are necessary elements for a university student's success. Therefore, this study developed a co-creation blended KM model to cultivate university students' CT skills and to explore the underlying mechanisms for achieving success. Thirty-one university students participated in this…

Influential Factors for Knowledge Creation Practices of CTE Teachers: Mutual Impact of Perceived School Support, Transformational Leadership, and Work Engagement

ERIC Educational Resources Information Center

Song, Ji Hoon; Bae, Sang Hoon; Park, Sunyoung; Kim, Hye Kyoung

2013-01-01

This study examined the structural relationships among perceived school support, transformational leadership, teachers' work engagement, and teachers' knowledge creation practices. It also investigated the mediating effects of transformational leadership and work engagement in explaining the association between perceived school support…

Developing Knowledge Creating Technical Education Institutions through the Voice of Teachers: Content Analysis Approach

ERIC Educational Resources Information Center

Song, Ji Hoon; Kim, Hye Kyoung; Park, Sunyoung; Bae, Sang Hoon

2014-01-01

The purpose of this study was to develop an empirical data-driven model for a knowledge creation school system in career technical education (CTE) by identifying supportive and hindering factors influencing knowledge creation practices in CTE schools. Nonaka and colleagues' (Nonaka & Konno, 1998; Nonaka & Takeuchi, 1995) knowledge…

Evaluating Best Practices for Video Tutorials: A Case Study

ERIC Educational Resources Information Center

Weeks, Thomas; Putnam Davis, Jennifer

2017-01-01

This article will explore one library's experience creating best practices for the creation of video tutorials. First, a literature review establishes the best practices other creators have used. Then, the authors apply these best practices to the creation of their first video tutorial. Finally, they evaluate the usefulness of each practice in…

Knowledge Sharing and Creation in a Teachers' Professional Virtual Community

ERIC Educational Resources Information Center

Lin, Fu-ren; Lin, Sheng-cheng; Huang, Tzu-ping

2008-01-01

By virtue of the non-profit nature of school education, a professional virtual community composed of teachers provides precious data to understand the processes of knowledge sharing and creation. Guided by grounded theory, the authors conducted a three-phased study on a teachers' virtual community in order to understand the knowledge flows among…

Comic Relief: Graduate Students Address Multiple Meanings for Technology Integration with Digital Comic Creation

ERIC Educational Resources Information Center

Sockman, Beth Rajan; Sutton, Rhonda; Herrmann, Michele

2016-01-01

This study determined the usefulness of digital comic creation with 77 graduate students in a teacher technology course. Students completed an assigned reading and created digital comics that addressed technology integration concerns in the schools and society. Using practical action research, 77 student-created comics were analyzed. The findings…

Eye Movements during Art Appreciation by Students Taking a Photo Creation Course.

PubMed

Ishiguro, Chiaki; Yokosawa, Kazuhiko; Okada, Takeshi

2016-01-01

Previous studies have focused on the differences in the art appreciation process between individuals, and indicated that novice viewers of artworks, in comparison to experts, rarely consider the creation process of the artwork or how this may relate to style. However, behavioral changes in individuals after educational interventions have not been examined. Art education researchers claim that technical knowledge and creation experiences help novice viewers to pay attention to technical features of artwork. Therefore, an artistic photo creation course was designed and conducted to help students acquire techniques and procedural knowledge of photo creation. The present study verified whether students' viewing strategies during appreciation of photographs changed after the course. Twenty-one students participated in two sessions, viewing the same 12 photographs before and after the course. Based on the analysis of recorded eye movements, the results indicated that the students' perceptual exploration became more active with photographs containing recognizable subjects (i.e., humans and objects), and their global saccades increased when they viewed classic photography, one of the categories of photography covered in the course. Interview data after the course indicated that students became aware of the technical effects in photographs. These results suggest that students' viewing strategies may change following a course, as assessed by behavioral measures of eye movements. Further examination is needed to validate this approach to educational effect measurement.

Eye Movements during Art Appreciation by Students Taking a Photo Creation Course

PubMed Central

Ishiguro, Chiaki; Yokosawa, Kazuhiko; Okada, Takeshi

2016-01-01

Previous studies have focused on the differences in the art appreciation process between individuals, and indicated that novice viewers of artworks, in comparison to experts, rarely consider the creation process of the artwork or how this may relate to style. However, behavioral changes in individuals after educational interventions have not been examined. Art education researchers claim that technical knowledge and creation experiences help novice viewers to pay attention to technical features of artwork. Therefore, an artistic photo creation course was designed and conducted to help students acquire techniques and procedural knowledge of photo creation. The present study verified whether students' viewing strategies during appreciation of photographs changed after the course. Twenty-one students participated in two sessions, viewing the same 12 photographs before and after the course. Based on the analysis of recorded eye movements, the results indicated that the students' perceptual exploration became more active with photographs containing recognizable subjects (i.e., humans and objects), and their global saccades increased when they viewed classic photography, one of the categories of photography covered in the course. Interview data after the course indicated that students became aware of the technical effects in photographs. These results suggest that students' viewing strategies may change following a course, as assessed by behavioral measures of eye movements. Further examination is needed to validate this approach to educational effect measurement. PMID:27471485

The Influence of Education Major: How Diverse Preservice Teachers View Pseudoscience Topics

NASA Astrophysics Data System (ADS)

Losh, Susan Carol; Nzekwe, Brandon

2011-10-01

Pseudoscience beliefs (e.g., astrology, ghosts or UFOs) are rife in American society. Most research examines creation/evolution among liberal arts majors, general public adults, or, infrequently, middle or high school science teachers. Thus, research truncates the range of ersatz science thinking and the samples it studies. We examined diverse beliefs, e.g., extraterrestrials, magic, Biblical creation, and evolution, among 540 female and 123 male future teachers, including 325 elementary education majors. We study how these cognitions related to education major and, because popular media often present pseudoscience "information", student media use. Future elementary educators most often rejected evolution and endorsed "creationism" or Intelligent Design. Education majors held similar beliefs about astrology, UFO landings, or magic. Compared with other education students, elementary education majors watched less news or science television and read fewer popular science magazines. However, religious and media variables explained more variation in creation/evolution beliefs than education major. We discuss implications of our findings for elementary school science education and how teacher educators may be able to affect pseudoscience beliefs among their elementary education students.

A Study of Functional Polymer Colloids Prepared Using Thiol-Ene/Yne Click Chemistry

NASA Astrophysics Data System (ADS)

Durham, Olivia Z.

This project demonstrates the first instance of thiol-ene chemistry as the polymerization method for the production of polymer colloids in two-phase heterogeneous suspensions, miniemulsions, and emulsions. This work was also expanded to thiol-yne chemistry for the production of polymer particles containing increased crosslinking density. The utility of thiol-ene and thiol-yne chemistries for polymerization and polymer modification is well established in bulk systems. These reactions are considered 'click' reactions, which can be defined as processes that are both facile and simple, offering high yields with nearly 100% conversion, no side products, easy product separation, compatibility with a diverse variety of commercially available starting materials, and orthogonality with other chemistries. In addition, thiol-ene and thiol-yne chemistry follow a step-growth mechanism for the development of highly uniform polymer networks, where polymer growth is dependent on the coupling of functional groups. These step-growth polymerization systems are in stark contrast to the chain-growth mechanisms of acrylic and styrenic monomers that have dominated the field of conventional heterogeneous polymerizations. Preliminary studies evaluated the mechanism of particle production in suspension and miniemulsion systems. Monomer droplets were compared to the final polymer particles to confirm that particle growth occurred through the polymerization of monomer droplets. Additional parameters examined include homogenization energy (mechanical mixing), diluent species and concentration, and monomer content. These reactions were conducted using photoinitiation to yield particles in a matter of minutes with diameters in the size range of several microns to hundreds of microns in suspensions or submicron particles in miniemulsions. Improved control over the particle size and size distribution was examined through variation of reaction parameters. In addition, a method of seeded suspension polymerization was attempted. This project was further expanded through an extensive evaluation of stabilizers in thiol-ene suspension polymerizations. The scope of stabilizers used included synthetic surfactants (ionic and nonionic), natural gums, and colloidal silica (Pickering stabilization). Suspension polymerizations were further expanded to include thiol-yne chemistry for the evaluation of polymer composition and thermal properties. In addition, polymer particles with excess ene, yne, or thiol functionality were successfully developed to demonstrate the potential for further functionalization. The self-limiting behavior of thiol-ene/yne reactions allows for successful synthesis of functional polymer colloids using off-stoichiometric amounts of monomers. This capacity to control functionality is illustrated through the creation of fluorescent polymer particles using both an in situ thiol-ene polymerization reaction with a vinyl chromophore as well as through post-polymerization modification of thiol-ene and thiol-yne polymers with excess thiol functionality via thiol-isocyanate chemistry. To produce smaller polymer particles without the need for intense homogenization energy or high stabilizer concentrations, an emulsion polymerization system was implemented using a water soluble-thermal initiator. It was found that unlike thiol-ene suspensions, which are limited to crosslinked systems, thiol-ene emulsion polymerizations allowed for the production of polymer particles comprised of either crosslinked or linear polymer networks. For the crosslinked systems, various anionic SDS surfactant concentrations were examined to observe the influence on particle size. In linear polymer systems, variations in polymer composition were examined. Preliminary studies performed with a monomer with an ethylene glycol-like structure indicated that the synthesis of polymer particles with narrower size distributions compared to any of the other emulsion compositions was possible. Finally, thiol-ene chemistry was also employed toward the synthesis of degradable polyanhydride polymer particles. Unlike the aforementioned studies, the approach to particle synthesis was conducted by using a premade thiol-ene polymer. Various linear thiol-ene polyanhydrides were emulsified in water or buffered solutions via sonication. Polymer latex was obtained upon solvent evaporation of the dichloromethane (DCM) solvent used to solubilize the polymer. In this work, variation of polymer composition as well as degradation was examined. Additional experiments included a study of the release of Rhodamine B dye, functionalization of the linear polymers, and studies involving the delay of degradation through the incorporation of crosslinking in the polymer particles. The projects presented herein provide an innovative approach to the synthesis of polymer colloids using thiol-ene and thiol-yne 'click' chemistry in both heterogeneous polymerizations as well as through solvent evaporation of premade polymer solutions. Polymer colloids prove to be an area of great interest for numerous applications that encompass various areas involving biomedical and industrial technologies including paints and coatings, cosmetics, diagnostics, and drug delivery. Improvements in methods of chemical synthesis as well as advances in the tailoring of material properties are of utmost importance for the ever increasing demands of new technologies and educational enlightenment.

Electric field measurements during the Condor critical velocity experiment

NASA Technical Reports Server (NTRS)

Kelley, M. C.; Pfaff, R. F.; Haerendel, G.

1986-01-01

The instrumentation of the Condor critical velocity Ba experiment (Wescott et al., 1986) for the measurements of the energetic particles and the electric field associated with a Ba explosion is described. The Ba explosion created a complex electric field pulse detected in situ by a single-axis double electric-field probe on a separate spacecraft. The measurements provide evidence of several important links in the critical-velocity chain, and are consistent with two hypotheses. The first hypothesis involves the creation of large polarization electric field due to charge separation; the second hypothesis implies a polarization of the beam by currents flowing across it. The chain of physical processes inferred from the observations is in agreement with most theories for the Alfven process.

Homogeneous Atomic Fermi Gases

NASA Astrophysics Data System (ADS)

Mukherjee, Biswaroop; Yan, Zhenjie; Patel, Parth B.; Hadzibabic, Zoran; Yefsah, Tarik; Struck, Julian; Zwierlein, Martin W.

2017-03-01

We report on the creation of homogeneous Fermi gases of ultracold atoms in a uniform potential. In the momentum distribution of a spin-polarized gas, we observe the emergence of the Fermi surface and the saturated occupation of one particle per momentum state: the striking consequence of Pauli blocking in momentum space for a degenerate gas. Cooling a spin-balanced Fermi gas at unitarity, we create homogeneous superfluids and observe spatially uniform pair condensates. For thermodynamic measurements, we introduce a hybrid potential that is harmonic in one dimension and uniform in the other two. The spatially resolved compressibility reveals the superfluid transition in a spin-balanced Fermi gas, saturation in a fully polarized Fermi gas, and strong attraction in the polaronic regime of a partially polarized Fermi gas.

Inclusive reconstruction of hadron resonances in elementary and heavy-ion collisions with HADES

NASA Astrophysics Data System (ADS)

Kornakov, Georgy

2016-11-01

The unambiguous identification of hadron modifications in hot and dense QCD matter is one of the important goals in nuclear physics. In the regime of 1 - 2 GeV kinetic energy per nucleon, HADES has measured rare and penetrating probes in elementary and heavy-ion collisions. The main creation mechanism of mesons is the excitation and decay of baryonic resonances throughout the fireball evolution. The reconstruction of shortlived (≈ 1 fm/c) resonance states through their decay products is notoriously difficult. We have developed a new iterative algorithm, which builds the best hypothesis of signal and background by distortion of individual particle properties. This allows to extract signals with signal-to-background ratios of <1%.

The long-term effects of arteriovenous fistula creation on the development of pulmonary hypertension in hemodialysis patients.

PubMed

Unal, Aydin; Tasdemir, Kutay; Oymak, Sema; Duran, Mustafa; Kocyigit, Ismail; Oguz, Fatih; Tokgoz, Bulent; Sipahioglu, Murat Hayri; Utas, Cengiz; Oymak, Oktay

2010-10-01

The aim of this prospective study was to evaluate long-term effects of arteriovenous fistula (AVF) on the development of pulmonary arterial hypertension (PAH) and the relationship between blood flow rate of AVF and pulmonary artery pressure (PAP) in the patients with end-stage renal disease (ESRD). This prospective study was performed in 20 patients with ESRD. Before an AVF was surgically created for hemodialysis, the patients were evaluated by echocardiography. Then, an AVF was surgically created in all patients. After mean 23.50 ± 2.25 months, the second evaluation was performed by echocardiography. Also, the blood flow rate of AVF was measured at the second echocardiographic evaluation. Pulmonary arterial hypertension was defined as a systolic PAP above 35 mmHg at rest. Mean age of 20 patients with ESRD was 55.05 ± 13.64 years; 11 of 20 patients were males. Pulmonary arterial hypertension was detected in 6 (30%) patients before AVF creation and in 4 (20%) patients after AVF creation. Systolic PAP value was meaningfully lower after AVF creation than before AVF creation (29.95 ± 10.26 mmHg vs. 35.35 ± 7.86 mmHg, respectively, P: 0.047). However, there was no significant difference between 2 time periods in terms of presence of PAH (P>0.05). Pulmonary artery pressure did not correlate with blood flow rate of AVF and duration after AVF creation (P>0.05). In hemodialysis patients, a surgically created AVF has no significant effect on the development of PAH within a long-term period. Similarly, blood flow rate of AVF also did not affect remarkably systolic PAP within the long-term period. © 2010 The Authors. Hemodialysis International © 2010 International Society for Hemodialysis.

Effects of upper-extremity vascular access creation on cardiac events in patients undergoing coronary artery bypass grafting.

PubMed

Han, Youngjin; Choo, Suk Jung; Kwon, Hyunwook; Lee, Jae Won; Chung, Cheol Hyun; Kim, Hyangkyoung; Kwon, Tae-Won; Cho, Yong-Pil

2017-01-01

The present study was conducted to investigate whether upper-extremity vascular access (VA) creation increases the risk for major adverse cardiac events (MACE) and death in patients undergoing coronary artery bypass grafting (CABG) with an in situ left internal thoracic artery (ITA) graft. A total of 111 patients with CABG with a left ITA graft who underwent upper-extremity VA creation were analyzed retrospectively; 93 patients received left VA creation (83.8%, ipsilateral group) and 18 patients received right VA creation (16.2%, contralateral group). The primary outcome was the occurrence of MACE, and the secondary outcome was the composite of MACE or late death. There were no significant differences in the incidence of primary (P = 0.30) or secondary (P = 0.09) outcomes between the two groups. Multivariate regression analysis indicated that prior cerebrovascular accidents (hazard ratio [HR] 3.30; 95% confidence interval [CI] 1.37-7.97; P = 0.01) and type of VA (HR 3.44; 95% CI 1.34-8.82; P = 0.01) were independently associated with MACE; prior peripheral arterial occlusive disease (HR 4.22; 95% CI 1.62-10.98; P<0.01) and type of VA (arteriovenous fistula vs. prosthetic arteriovenous grafting) (HR 3.06; 95% CI, 1.42-6.61; P<0.01) were associated with the composite of MACE or death. The side and location of VA were not associated with MACE or death. Our study showed no definite evidence that ipsilateral VA creation affects the subsequent occurrence of MACE or late death from any cause. The type of VA (a prosthetic arteriovenous grafting) is a significant predictor of the subsequent occurrence of MACE or late death.

Predictors of nonfunctional arteriovenous access at hemodialysis initiation and timing of access creation: A registry-based study

PubMed Central

Metzger, Marie; Labeeuw, Michel; Ayav, Carole; Jacquelinet, Christian; Massy, Ziad A.; Stengel, Bénédicte

2017-01-01

Determinants of nonfunctional arteriovenous (AV) access, including timing of AV access creation, have not been sufficiently described. We studied 29 945 patients who had predialysis AV access placement and were included in the French REIN registry from 2005 through 2013. AV access was considered nonfunctional when dialysis began with a catheter. We estimated crude and adjusted odds ratio (OR) with 95% confidence intervals (CI) of nonfunctional versus functional AV access associated with case-mix, facility characteristics, and timing of AV access creation. Analyses were stratified by dialysis start condition (planned or as an emergency) and comorbidity profile. Overall, 18% patients had nonfunctional AV access at hemodialysis initiation. In the group with planned dialysis start, female gender (OR 1.43, 95% CI 1.32–1.56), diabetes (OR 1.28, 95% CI 1.15–1.44), and a higher number of cardiovascular comorbidities (OR 1.27, 95% CI 1.09–1.49, and 1.31, 1.05–1.64, for 3 and >3 cardiovascular comorbidities versus none, respectively) were independent predictors of nonfunctional AV access. A higher percentage of AV access creation at the region level was associated with a lower rate of nonfunctional AV access (OR 0.98, 95% CI 0.98–0.99 per 1% increase). The odds of nonfunctional AV access decreased as time from creation to hemodialysis initiation increased up to 3 months in nondiabetic patients with fewer than 2 cardiovascular comorbidities and 6 months in patients with diabetes or 2 or more such comorbidities. In conclusion, both patient characteristics and clinical practices may play a role in successful AV access use at hemodialysis initiation. Adjusting the timing of AV access creation to patients’ comorbidity profiles may improve functional AV access rates. PMID:28749967

Predictors of nonfunctional arteriovenous access at hemodialysis initiation and timing of access creation: A registry-based study.

PubMed

Alencar de Pinho, Natalia; Coscas, Raphael; Metzger, Marie; Labeeuw, Michel; Ayav, Carole; Jacquelinet, Christian; Massy, Ziad A; Stengel, Bénédicte

2017-01-01

Determinants of nonfunctional arteriovenous (AV) access, including timing of AV access creation, have not been sufficiently described. We studied 29 945 patients who had predialysis AV access placement and were included in the French REIN registry from 2005 through 2013. AV access was considered nonfunctional when dialysis began with a catheter. We estimated crude and adjusted odds ratio (OR) with 95% confidence intervals (CI) of nonfunctional versus functional AV access associated with case-mix, facility characteristics, and timing of AV access creation. Analyses were stratified by dialysis start condition (planned or as an emergency) and comorbidity profile. Overall, 18% patients had nonfunctional AV access at hemodialysis initiation. In the group with planned dialysis start, female gender (OR 1.43, 95% CI 1.32-1.56), diabetes (OR 1.28, 95% CI 1.15-1.44), and a higher number of cardiovascular comorbidities (OR 1.27, 95% CI 1.09-1.49, and 1.31, 1.05-1.64, for 3 and >3 cardiovascular comorbidities versus none, respectively) were independent predictors of nonfunctional AV access. A higher percentage of AV access creation at the region level was associated with a lower rate of nonfunctional AV access (OR 0.98, 95% CI 0.98-0.99 per 1% increase). The odds of nonfunctional AV access decreased as time from creation to hemodialysis initiation increased up to 3 months in nondiabetic patients with fewer than 2 cardiovascular comorbidities and 6 months in patients with diabetes or 2 or more such comorbidities. In conclusion, both patient characteristics and clinical practices may play a role in successful AV access use at hemodialysis initiation. Adjusting the timing of AV access creation to patients' comorbidity profiles may improve functional AV access rates.

Effects of upper-extremity vascular access creation on cardiac events in patients undergoing coronary artery bypass grafting

PubMed Central

Han, Youngjin; Choo, Suk Jung; Kwon, Hyunwook; Lee, Jae Won; Chung, Cheol Hyun; Kim, Hyangkyoung; Kwon, Tae-Won

2017-01-01

The present study was conducted to investigate whether upper-extremity vascular access (VA) creation increases the risk for major adverse cardiac events (MACE) and death in patients undergoing coronary artery bypass grafting (CABG) with an in situ left internal thoracic artery (ITA) graft. A total of 111 patients with CABG with a left ITA graft who underwent upper-extremity VA creation were analyzed retrospectively; 93 patients received left VA creation (83.8%, ipsilateral group) and 18 patients received right VA creation (16.2%, contralateral group). The primary outcome was the occurrence of MACE, and the secondary outcome was the composite of MACE or late death. There were no significant differences in the incidence of primary (P = 0.30) or secondary (P = 0.09) outcomes between the two groups. Multivariate regression analysis indicated that prior cerebrovascular accidents (hazard ratio [HR] 3.30; 95% confidence interval [CI] 1.37–7.97; P = 0.01) and type of VA (HR 3.44; 95% CI 1.34–8.82; P = 0.01) were independently associated with MACE; prior peripheral arterial occlusive disease (HR 4.22; 95% CI 1.62–10.98; P<0.01) and type of VA (arteriovenous fistula vs. prosthetic arteriovenous grafting) (HR 3.06; 95% CI, 1.42–6.61; P<0.01) were associated with the composite of MACE or death. The side and location of VA were not associated with MACE or death. Our study showed no definite evidence that ipsilateral VA creation affects the subsequent occurrence of MACE or late death from any cause. The type of VA (a prosthetic arteriovenous grafting) is a significant predictor of the subsequent occurrence of MACE or late death. PMID:28873444

Vascular Access Practice Patterns in Canada: A National Survey

PubMed Central

Dumaine, Chance; Kiaii, Mercedeh; Miller, Lisa; Moist, Louise; Oliver, Matthew J.; Lok, Charmaine E.; Hiremath, Swapnil; MacRae, Jennifer M.

2018-01-01

Background: One of the mandates of the Canadian Society of Nephrology’s (CSN) Vascular Access Working Group (VAWG) is to inform the nephrology community of the current status of vascular access (VA) practice within Canada. To better understand VA practice patterns across Canada, the CSN VAWG conducted a national survey. Objectives: (1) To inform on VA practice patterns, including fistula creation and maintenance, within Canada. (2) To determine the degree of consensus among Canadian clinicians regarding patient suitability for fistula creation and to assess barriers to and facilitators of fistula creation in Canada. Design: Development and implementation of a survey. Setting: Community and academic VA programs. Participants: Nephrologists, surgeons, and nurses who are involved in VA programs across Canada. Measurements: Practice patterns regarding access creation and maintenance, including indications and contraindications to fistula creation, as well as program-wide facilitators of and barriers to VA. Methods: A small group of CSN VAWG members determined the scope and created several VA questions which were then reviewed by 5 additional VAWG members (4 nephrologists and 1 VA nurse) to ensure that questions were clear and relevant. The survey was then tested by the remaining members of the VAWG and refinements were made. The final survey version was submitted electronically to relevant clinicians (nephrologists, surgeons, and nurses) involved or interested in VA across Canada. Questions centered around 4 major themes: (1) Practice patterns regarding access creation (preoperative assessment and maturation assessment), (2) Practice patterns regarding access maintenance (surveillance and salvage), (3) Indications and contraindications for arteriovenous (AV) access creation, and (4) Facilitators of and barriers to fistula creation and utilization. Results: Eighty-two percent (84 of 102) of invited participants completed the survey; the majority were nurses or VA coordinators (55%) with the remainder consisting of nephrologists (21%) and surgeons (20%). Variation in practice was noted in utility of preoperative Doppler ultrasound, interventions to assist nonmaturing fistulas, and procedures to salvage failing or thrombosed AV-access. Little consensus was seen regarding potential contraindications to AV-access creation (with the exception of limited life expectancy and poor vasculature on preoperative imaging, which had high agreement). Frequent barriers to fistula utilization were primary failure (77% of respondents) and long maturation times (73%). Respondents from centers with low fistula prevalence also cited long surgical wait times as an important barrier to fistula creation, whereas those from centers with high fistula prevalence cited access to multidisciplinary teams and interventional radiology as keys to successful fistula creation and utilization. Conclusions: There is significant variation in VA practice across Canada and little consensus among Canadian clinicians regarding contraindications to fistula creation. Further high-quality studies are needed with regard to appropriate fistula placement to help guide clinical practice. PMID:29511569

Developmental trends in the process of constructing own- and other-race facial composites.

PubMed

Kehn, Andre; Renken, Maggie D; Gray, Jennifer M; Nunez, Narina L

2014-01-01

The current study examined developmental differences from the age of 5 to 18 in the creation process of own- and other-race facial composites. In addition, it considered how differences in the creation process affect similarity ratings. Participants created two composites (one own- and one other-race) from memory. The complexity of the composite creation process was recorded during Phase One. In Phase Two, a separate group of participants rated the composites for similarity to the corresponding target face. Results support the cross-race effect, developmental differences (based on composite creators) in similarity ratings, and the importance of the creation process for own- and other-race facial composites. Together, these findings suggest that as children get older the process through which they create facial composites becomes more complex and their ability to create facial composites improves. Increased complexity resulted in higher rated composites. Results are discussed from a psycho-legal perspective.

Corporate Social Responsibility: A Real Options Approach to the Challenge of Financial Sustainability

PubMed Central

2015-01-01

Background In contemporary complex societies, social values like ethics, corporate social responsibility, and being respectful with the environment, among others, are becoming social requirements. Corporations are expected to fulfill them and, according to empirical evidence, an overwhelming majority aspires to good social valuation. At the same time, the maximization of market share value in the long run continues to be the central corporate goal. Making environmental and social expenses compatible with value creation is a central challenge for corporations since it implies the financial sustainability of Corporate Social Responsibility (CSR). Methods and Results The value creation capacity of CSR projects, mainly through innovation, is widely acknowledged in economic literature and corporate practice. This fact arouses the need of having a quantitative framework capable of summarizing the value creation capacity of the variables involved in CSR projects. With this aim we build up a sensitivity analysis of real option ratios that studies and quantifies the value creation capacity of CSR projects connected with innovation. Ratio analysis has the advantage of being scale independent. Hence, it furnishes a homogeneous framework to express the interaction of value creation variables and, thus, supports strategic thinking quantitatively. Often, CSR expenses can be regarded as preliminary projects that create the opportunity to undertake a full future project. For them, we obtain the minimum expectations scenario that makes financially sustainable a preliminary project that can be interpreted as a call option. We propose a classification of CSR projects from the decision analysis perspective following a two-fold approach: Their relationship with value creation and their links with existing corporate activities. This classification of CSR projects aims at contributing to choose the best capital budgeting method to study the financial sustainability of the project and identifying those CSR projects that fulfill the required features to be studied from the real options perspective. PMID:25938410

Corporate social responsibility: a real options approach to the challenge of financial sustainability.

PubMed

Bosch-Badia, Maria-Teresa; Montllor-Serrats, Joan; Tarrazon-Rodon, Maria-Antonia

2015-01-01

In contemporary complex societies, social values like ethics, corporate social responsibility, and being respectful with the environment, among others, are becoming social requirements. Corporations are expected to fulfill them and, according to empirical evidence, an overwhelming majority aspires to good social valuation. At the same time, the maximization of market share value in the long run continues to be the central corporate goal. Making environmental and social expenses compatible with value creation is a central challenge for corporations since it implies the financial sustainability of Corporate Social Responsibility (CSR). The value creation capacity of CSR projects, mainly through innovation, is widely acknowledged in economic literature and corporate practice. This fact arouses the need of having a quantitative framework capable of summarizing the value creation capacity of the variables involved in CSR projects. With this aim we build up a sensitivity analysis of real option ratios that studies and quantifies the value creation capacity of CSR projects connected with innovation. Ratio analysis has the advantage of being scale independent. Hence, it furnishes a homogeneous framework to express the interaction of value creation variables and, thus, supports strategic thinking quantitatively. Often, CSR expenses can be regarded as preliminary projects that create the opportunity to undertake a full future project. For them, we obtain the minimum expectations scenario that makes financially sustainable a preliminary project that can be interpreted as a call option. We propose a classification of CSR projects from the decision analysis perspective following a two-fold approach: Their relationship with value creation and their links with existing corporate activities. This classification of CSR projects aims at contributing to choose the best capital budgeting method to study the financial sustainability of the project and identifying those CSR projects that fulfill the required features to be studied from the real options perspective.

Electrospray Charging of Minerals: Surface Chemistry and Applications to High-Velocity Microparticle Impacts

NASA Astrophysics Data System (ADS)

Daly, T.; Call, S.; Austin, D. E.

2010-12-01

Electrospray is a soft ionization technique commonly used to charge large biomolecules; it has, however, also been applied to inorganic compounds. We are extending this technique to mineral microparticles. Electrospray-charged mineral microparticles are interesting in the context of surface science because surface chemistry dictates where and how charge carriers can bond to mineral surfaces. In addition, using electrospray to charge mineral particles allows these particles to be electrostatically accelerated as projectiles in high- and hyper-velocity impacts. Since current techniques for producing high- and hyper-velocity microparticle impacts are largely limited to metal or metal-coated projectiles, using minerals as projectiles is a significant innovation. Electrospray involves three steps: creation of charged droplets containing solute/particles, evaporation and bifurcation of droplets, and desolvation of the solute/particles. An acidified solution is slowly pumped through a needle in a strong DC field, which causes the solution to break into tiny, charged droplets laden with protons. Solvent evaporates from the electrosprayed droplets as they move through the electric field toward a grounded plate, causing the charge on the droplet to increase relative to its mass. When the electrosprayed droplet’s charge becomes such that the droplet is no longer stable, it bifurcates, and each of the resulting droplets carries some of the original droplet’s charge. Evaporation and bifurcation continues until the solute particle is completely desolvated. The result is a protonated solute molecule or particle. We built an instrument that electrosprays particles into vacuum and measures them using an image charge detector. Mineral microparticles were prepared by grinding natural mineral samples to ~2 µm diameter. These microparticles are then added to a 4:1 methanol:water solution to create a 0.005% w/v suspension. The suspension is electrosprayed into vacuum, where the charge detector measures the electrosprayed mineral particles’ speed and charge. Quartz microparticles have been successfully electrosprayed. Variation in quartz microparticles’ charge as a function of pH is being evaluated. In addition, we are studying how to completely desolvate electrosprayed mineral particles. Desolvation is not trivial and often requires more than the passive passage of the droplets from the needle to the grounded plate and into vacuum. We are testing two desolvation methods: a heated beam tube and a heated capillary. Preliminary data suggests we have achieved complete desolvation with a hot beam tube. Although quartz’s surface chemistry is rather unique, successful electrospray of quartz microparticles strongly suggests that other minerals may also be electrosprayed. We are preparing olivine samples for electrospray. In addition, an instrument that creates high-velocity microparticle impacts using electrospray-charged mineral microparticles is being developed. This instrument will not only permit minerals to be used as projectiles, but also allows direction characterization of chemical speciation occurring during microparticle impacts.

How Co-Creation Helped Address Hierarchy, Overwhelmed Patients, and Conflicts of Interest in Health Care Quality and Safety.

PubMed

Israilov, Sigal; Cho, Hyung J

2017-11-01

Co-creation is health professionals' and systems' development of health care together with patients and families. Such collaborations yield an exchange of values, ideas, and priorities that can individualize care for each patient. Co-creation has been discussed interchangeably with co-production and shared decision making; this article explores co-creation through the lens of quality improvement. Although there are barriers to co-creation including physician autonomy, patient overwhelm, and conflicts of interest, co-creation has been shown to promote patient engagement, peer learning, and improved outcomes. Further research is needed in co-creation for systems improvement. © 2017 American Medical Association. All Rights Reserved.

The Enceladus Ionizing Radiation Environment: Implications for Biomolecules

NASA Astrophysics Data System (ADS)

Teodoro, L. A.; Elphic, R. C.; Davila, A. F.; McKay, C.; Dartnell, L.

2016-12-01

Enceladus' subsurface ocean is a possible abode for life, but it is inaccessible with current technology. However, icy particles and vapor are being expelled into space through surface fractures known as Tiger Stripes, forming a large plume centered in the South Polar Terrains. Direct chemical analyses by Cassini have revealed salts and organic compounds in a significant fraction of plume particles, which suggests that the subsurface ocean is the main source of materials in the plume (i.e. frozen ocean spray). While smaller icy particles in the plume reach escape velocity and feed Saturn's E-ring, larger particles fall back on the moon's surface, where they accumulate as icy mantling deposits at practically all latitudes. The organic content of these fall-out materials could be of great astrobiological relevance. Galactic Cosmic Rays (GCRs) that strike both Enceladus' surface and the lofted icy particles produce ionizing radiation in the form of high-energy electrons, protons, gamma rays, neutrons and muons. An additional source of ionizing radiation is the population of energetic charged particles in Saturn's magnetosphere. The effects of ionizing radiation in matter always involve the destruction of chemical bonds and the creation of free radicals. Both affect organic matter, and can damage or destroy biomarkers over time. Using ionizing radiation transport codes, we recreated the radiation environment on the surface of Enceladus, and evaluated its possible effects on organic matter (including biomarkers) in the icy mantling deposits. Here, we present full Monte-Carlo simulations of the nuclear reactions induced by the GCRs hitting Enceladus's surface using a code based on the GEANT-4 toolkit for the transport of particles. To model the GCR primary spectra for Z= 1-26 (protons to iron nuclei) we assumed the CREAME96 model under solar minimum, modified to take into account Enceladus' location. We considered bulk compositions of: i) pure water ice, ii) water ice and organics (1-10%), and iii) water ice, organics and salts (up to 2%). The computed flux of ionizing radiation is converted into dosage at the molecular level using a "biologically-weighted" scheme, which provides an estimate of the biomarkers' survival time.

Challenges of Knowledge Management and Creation in Communities of Practice Organisations of Deaf and Non-Deaf Members: Requirements for a Web Platform

ERIC Educational Resources Information Center

de Freitas Guilhermino Trindade, Daniela; Guimaraes, Cayley; Antunes, Diego Roberto; Garcia, Laura Sanchez; Lopes da Silva, Rafaella Aline; Fernandes, Sueli

2012-01-01

This study analysed the role of knowledge management (KM) tools used to cultivate a community of practice (CP) in its knowledge creation (KC), transfer, learning processes. The goal of such observations was to determine requirements that KM tools should address for the specific CP formed by Deaf and non-Deaf members of the CP. The CP studied is a…

The cost of demand creation activities and voluntary medical male circumcision targeting school-going adolescents in KwaZulu-Natal, South Africa

PubMed Central

2017-01-01

Background Voluntary medical male circumcision is an integral part of the South African government’s response to the HIV and AIDS epidemic. However, there remains a limited body of economic analysis on the cost of VMMC programming, and the demand creation activities used to mobilize males, especially among adolescent boys in school. This study addresses this gap by presenting the costs of a VMMC program which adopted two demand creation strategies targeting school-going males in South Africa. Methods Cost data was collected from a VMMC program in the KwaZulu-Natal province of South Africa. A retrospective, micro-costing ingredient approach was applied to identify, measure and value resources of two demand creation strategies targeting young males. Results The program circumcised 4987 young males between May 2011 and February 2013, at a cost of $127.68 per circumcision. Demand creation activities accounted for 32% of the total cost, HCT contributing 10% with the medical circumcision procedure accounting for 58% of the total cost. Using the first demand creation strategy, 2168 circumcisions were performed at a cost of $149.57 per circumcision. Following this first strategy, a second demand creation strategy was adopted which saw the cost fall to $110.85 per circumcision. More young males were recruited following the second strategy with clinic services more efficiently utilized. Whilst the cost per circumcision of demand activities rose slightly between the first ($39.94) and second ($41.65) strategy, there was a substantial reduction in the cost of the circumcision procedure; $90.01 under the first strategy falling to $60.60 following the adoption of the second demand creation strategy. Conclusion Ensuring the optimal use of clinic facilities was the primary driver in reducing the cost per circumcision. This VMMC program has illustrated the value of evaluating progress and instituting changes to attain better cost efficiencies. This adjustment resulted in a substantial reduction in the cost per circumcision. PMID:28632768

The cost of demand creation activities and voluntary medical male circumcision targeting school-going adolescents in KwaZulu-Natal, South Africa.

PubMed

George, Gavin; Strauss, Michael; Asfaw, Elias

2017-01-01

Voluntary medical male circumcision is an integral part of the South African government's response to the HIV and AIDS epidemic. However, there remains a limited body of economic analysis on the cost of VMMC programming, and the demand creation activities used to mobilize males, especially among adolescent boys in school. This study addresses this gap by presenting the costs of a VMMC program which adopted two demand creation strategies targeting school-going males in South Africa. Cost data was collected from a VMMC program in the KwaZulu-Natal province of South Africa. A retrospective, micro-costing ingredient approach was applied to identify, measure and value resources of two demand creation strategies targeting young males. The program circumcised 4987 young males between May 2011 and February 2013, at a cost of $127.68 per circumcision. Demand creation activities accounted for 32% of the total cost, HCT contributing 10% with the medical circumcision procedure accounting for 58% of the total cost. Using the first demand creation strategy, 2168 circumcisions were performed at a cost of $149.57 per circumcision. Following this first strategy, a second demand creation strategy was adopted which saw the cost fall to $110.85 per circumcision. More young males were recruited following the second strategy with clinic services more efficiently utilized. Whilst the cost per circumcision of demand activities rose slightly between the first ($39.94) and second ($41.65) strategy, there was a substantial reduction in the cost of the circumcision procedure; $90.01 under the first strategy falling to $60.60 following the adoption of the second demand creation strategy. Ensuring the optimal use of clinic facilities was the primary driver in reducing the cost per circumcision. This VMMC program has illustrated the value of evaluating progress and instituting changes to attain better cost efficiencies. This adjustment resulted in a substantial reduction in the cost per circumcision.

[The theory of mechanical activity of lungs--a creation history, the present and development prospects].

PubMed

Tetenev, F F; Tetenev, K F

2014-01-01

In article the history of creation of the doctrine about respiratory movements of lungs, history of classical mechanics of breathing is stated. Supervision of the paradoxical facts which became a basis for hypothesis creation, then the theory of mechanical activity of lungs are presented. The facts proving mechanical activity of lungs on an inspiration and an expiration are given. Options of interaction of intra pulmonary and extra pulmonary sources of mechanical energy are considered. Theoretical justification for development of the new direction of studying of physiology of mechanical movements of the internal which does not have own skeleton is stated.

The Communication in Science Inquiry Project (CISIP): A Project to Enhance Scientific Literacy through the Creation of Science Classroom Discourse Communities

ERIC Educational Resources Information Center

Baker, Dale R.; Lewis, Elizabeth B.; Purzer, Senay; Watts, Nievita Bueno; Perkins, Gita; Uysal, Sibel; Wong, Sissy; Beard, Rachelle; Lang, Michael

2009-01-01

This study reports on the context and impact of the Communication in Science Inquiry Project (CISIP) professional development to promote teachers' and students' scientific literacy through the creation of science classroom discourse communities. The theoretical underpinnings of the professional development model are presented and key professional…

The Mediating Effect of Team-Level Knowledge Creation on Organizational Procedural Justice and Team Performance Improvement

ERIC Educational Resources Information Center

Kang, Ingu; Song, Ji Hoon; Kim, Woocheol

2012-01-01

This study examines how organizational procedural justice affects team performance through team-level knowledge creation practices and the extent to which these practices mediate the association between organizational procedural justice and team performance. The target samples were drawn from six organizations in Korea. A total of 348 cases were…

Charting Collective Knowledge: Supporting Self-Regulated Learning in the Workplace

ERIC Educational Resources Information Center

Littlejohn, Allison; Milligan, Colin; Margaryan, Anoush

2012-01-01

Purpose: This study aims to outline an approach to improving the effectiveness of work-based learning through knowledge creation and enhancing self-regulated learning. The paper presents a case example of a novel approach to learning through knowledge creation in the workplace. This case example is based on empirical data collected through a study…

National Testing of Pupils in Europe: Objectives, Organisation and Use of Results. Estonia 2009

ERIC Educational Resources Information Center

Mere, Kristi

2009-01-01

Estonia restored its independence in 1991. The creation of legislation and reorganisation of the educational system was one of the first tasks of the restored Republic of Estonia. The development of the national curriculum for basic and upper secondary schools that provided a framework substituting the previous study modules, and the creation of…

Housing Mix, School Mix: Barriers to Success

ERIC Educational Resources Information Center

Camina, M. M.; Iannone, P.

2014-01-01

Recent UK policy has emphasised both the development of socially mixed communities and the creation of balanced school intakes. In this paper, we use a case study of an area of mixed tenure in eastern England to explore policy in practice and the extent to which mechanisms of segregation impact on both the creation of socially mixed neighbourhoods…