Regionalization of Habitat Suitability of Masson’s Pine based on geographic information system and Fuzzy Matter-Element Model

PubMed Central

Zhou, Xiuteng; Zhao, Manxi; Zhou, Liangyun; Yang, Guang; Huang, Luqi; Yan, Cuiqi; Huang, Quanshu; Ye, Liang; Zhang, Xiaobo; Guo, Lanpin; Ke, Xiao; Guo, Jiao

2016-01-01

Pine needles have been widely used in the development of anti-hypertensive and anti-hyperlipidemic agents and health food. However, the widespread distribution of this tree poses great obstacles to the quality control and efficacy evaluation. To facilitate the effective and rational exploitation of Masson’s pine (Pinus massoniana Lamb), as well as ensure effective development of Masson’s pine needles as a medicinal agent, we investigated the spatial distribution of habitat suitability and evaluated the optimal ranges of ecological factors of P. massoniana with 280 samples collected from 12 provinces in China through the evaluation of four constituents known to be effective medicinally. The results of habitat suitability evaluation were also verified by Root Mean Square Error (RMSE). Finally, five ecological factors were chosen in the establishment of a habitat suitability evaluation system. The most suitable areas for P. massoniana growth were mainly concentrated in the middle and lower reaches of the Yangtze River basin, such as Sichuan, Guizhou, and Jiangxi provinces, while the best quality needles were from Guizhou, Sichuan, and the junction area of Chongqing, Hunan, and Hubei provinces. This information revealed that suitable areas for effective constituent accumulation of Masson’s pine needles accounted for only 7.41% of its distribution area. PMID:27694967

Regionalization of Habitat Suitability of Masson’s Pine based on geographic information system and Fuzzy Matter-Element Model

NASA Astrophysics Data System (ADS)

Zhou, Xiuteng; Zhao, Manxi; Zhou, Liangyun; Yang, Guang; Huang, Luqi; Yan, Cuiqi; Huang, Quanshu; Ye, Liang; Zhang, Xiaobo; Guo, Lanpin; Ke, Xiao; Guo, Jiao

2016-10-01

Pine needles have been widely used in the development of anti-hypertensive and anti-hyperlipidemic agents and health food. However, the widespread distribution of this tree poses great obstacles to the quality control and efficacy evaluation. To facilitate the effective and rational exploitation of Masson’s pine (Pinus massoniana Lamb), as well as ensure effective development of Masson’s pine needles as a medicinal agent, we investigated the spatial distribution of habitat suitability and evaluated the optimal ranges of ecological factors of P. massoniana with 280 samples collected from 12 provinces in China through the evaluation of four constituents known to be effective medicinally. The results of habitat suitability evaluation were also verified by Root Mean Square Error (RMSE). Finally, five ecological factors were chosen in the establishment of a habitat suitability evaluation system. The most suitable areas for P. massoniana growth were mainly concentrated in the middle and lower reaches of the Yangtze River basin, such as Sichuan, Guizhou, and Jiangxi provinces, while the best quality needles were from Guizhou, Sichuan, and the junction area of Chongqing, Hunan, and Hubei provinces. This information revealed that suitable areas for effective constituent accumulation of Masson’s pine needles accounted for only 7.41% of its distribution area.

The introduction of local air quality management in the United Kingdom: A review and theoretical framework

NASA Astrophysics Data System (ADS)

Longhurst, J. W. S.; Lindley, S. J.; Watson, A. F. R.; Conlan, D. E.

In the light of recent episodes of poor air quality in many of the U.K.'s major urban areas, concern has been expressed regarding the apparent inability of existing air quality control procedures to effectively tackle contemporary scenarios. As a result of this, a new philosophy for air quality control has been sought which can provide a solid basis for the preservation and future improvement of air quality. It is proposed that a suitable mechanism for this would be found through the adoption of an integrated and holistic local air quality management approach. This paper will present and discuss a theoretical framework for the application of local air quality management in the U.K. and investigate the potential of the Environment Act (1995) to provide such a framework.

The comparison of perceived health-related quality of life between Australian children with severe specific language impairment to age and gender-matched peers.

PubMed

Nicola, Kristy; Watter, Pauline

2018-02-14

Children with specific language impairment often present with multiple comorbidities, which may adversely affect both participation in play and academic performance, potentially impacting a child's health-related quality of life. This study 1) explored the suitability of the Pediatric Quality of Life Inventory™ Version 4.0 Generic Core Scales (PedsQL™) for use with a typically developing Australian control group, and 2) compared the health-related quality of life between a control group and Australian children with severe specific language impairment. Health-related quality of life data collected as part of a broader study of 43 children with severe specific language impairment (males = 35, age range 5-16, mean age = 8.79+/- 2.92) enrolled at a special school were used to explore previously unreported findings. Typically developing gender and age matched (+/- 3 months) peers were recruited from local schools. The PedsQL™ child self-report and proxy-report were individually or interviewer-administered to the control group as required, and then compared to the group with specific language impairment. The PedsQL™ was reliable and feasible for use with the control group (N = 43, males = 35, age range = 5-16 years, mean age = 8.74+/- 2.94 years). Control group performance was as expected as per the manual. Parents of the control group scored their children significantly higher than did the children themselves on all scales except the emotional functioning scale. Both the control group children and their parents scored themselves significantly higher on all scales, compared to children with severe specific language impairment and their parents. The PedsQL™ was suitable for use with the control group. Further, the recruitment of a control group provided additional clarity on the extent a severe specific language impairment impacts on an Australian child's perceived health-related quality of life, compared to the manual cut-off scores. Severe specific language impairment significantly impacts negatively on the health-related quality of life of Australian children across all domains, particularly when compared to an age and gender-matched group of peers. These results warrant the inclusion of health-related quality of life evaluations in the assessment of these children along with a multidisciplinary approach.

Traceability and Quality Control in Traditional Chinese Medicine: From Chemical Fingerprint to Two-Dimensional Barcode

PubMed Central

Cai, Yong; Li, Xiwen; Li, Mei; Chen, Xiaojia; Ni, Jingyun; Wang, Yitao

2015-01-01

Chemical fingerprinting is currently a widely used tool that enables rapid and accurate quality evaluation of Traditional Chinese Medicine (TCM). However, chemical fingerprints are not amenable to information storage, recognition, and retrieval, which limit their use in Chinese medicine traceability. In this study, samples of three kinds of Chinese medicines were randomly selected and chemical fingerprints were then constructed by using high performance liquid chromatography. Based on chemical data, the process of converting the TCM chemical fingerprint into two-dimensional code is presented; preprocess and filtering algorithm are also proposed aiming at standardizing the large amount of original raw data. In order to know which type of two-dimensional code (2D) is suitable for storing data of chemical fingerprints, current popular types of 2D codes are analyzed and compared. Results show that QR Code is suitable for recording the TCM chemical fingerprint. The fingerprint information of TCM can be converted into data format that can be stored as 2D code for traceability and quality control. PMID:26089936

75 FR 70203 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... cards, and other commercial printing applications requiring high quality print graphics. Specifically... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the People's Republic of China... on certain coated paper suitable for high-quality print graphics using sheet-fed presses (``coated...

75 FR 59223 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From Indonesia: Final Determination of... high-quality print graphics using sheet-fed presses (certain coated paper) from Indonesia is being, or... certain coated paper from Indonesia. See Certain Coated Paper Suitable for High-Quality Print Graphics...

External Standards or Standard Addition? Selecting and Validating a Method of Standardization

NASA Astrophysics Data System (ADS)

Harvey, David T.

2002-05-01

A common feature of many problem-based laboratories in analytical chemistry is a lengthy independent project involving the analysis of "real-world" samples. Students research the literature, adapting and developing a method suitable for their analyte, sample matrix, and problem scenario. Because these projects encompass the complete analytical process, students must consider issues such as obtaining a representative sample, selecting a method of analysis, developing a suitable standardization, validating results, and implementing appropriate quality assessment/quality control practices. Most textbooks and monographs suitable for an undergraduate course in analytical chemistry, however, provide only limited coverage of these important topics. The need for short laboratory experiments emphasizing important facets of method development, such as selecting a method of standardization, is evident. The experiment reported here, which is suitable for an introductory course in analytical chemistry, illustrates the importance of matrix effects when selecting a method of standardization. Students also learn how a spike recovery is used to validate an analytical method, and obtain a practical experience in the difference between performing an external standardization and a standard addition.

Importance of good manufacturing practices in microbiological monitoring in processing human tissues for transplant.

PubMed

Pianigiani, Elisa; Ierardi, Francesca; Fimiani, Michele

2013-12-01

Skin allografts represent an important therapeutic resource in the treatment of severe skin loss. The risk associated with application of processed tissues in humans is very low, however, human material always carries the risk of disease transmission. To minimise the risk of contamination of grafts, processing is carried out in clean rooms where air quality is monitored. Procedures and quality control tests are performed to standardise the production process and to guarantee the final product for human use. Since we only validate and distribute aseptic tissues, we conducted a study to determine what type of quality controls for skin processing are the most suitable for detecting processing errors and intercurrent contamination, and for faithfully mapping the process without unduly increasing production costs. Two different methods for quality control were statistically compared using the Fisher exact test. On the basis of the current study we selected our quality control procedure based on pre- and post-processing tissue controls, operator and environmental controls. Evaluation of the predictability of our control methods showed that tissue control was the most reliable method of revealing microbial contamination of grafts. We obtained 100 % sensitivity by doubling tissue controls, while maintaining high specificity (77 %).

Investigation of the Mössbauer Spectrum Quality as a Dependence on the Frequency of the Velocity Signal

NASA Astrophysics Data System (ADS)

Pechousek, J.; Prochazka, R.; Cuda, J.; Frydrych, J.; Jancik, D.

2010-07-01

This paper is focused on a quality characterizing the Mössbauer spectra measured for various frequencies of the velocity signal. Standard electromechanical double-loudspeaker drive and digital PID velocity controller were used for calibration spectra measurement in the frequency interval from 4 up to 100 Hz. Several parameters were evaluated for recommendation of the suitable velocity signal frequency.

[Quality control of Maca (Lepidium meyenii)].

PubMed

Shu, Ji-cheng; Cui, Hang-qing; Huang, Ying-zheng; Huang, Xiao-ying; Yang, Ming

2015-12-01

To control the quality of Maca, the quality standard was established in this study. According to the methods recorded in the Appendix of Chinese Pharmacopoeia (2010 Edition), the water, extract, total ash, acid insoluble substance, and heavy metals inspections in Lepidium meyenii were carried out. N-benzyl-9Z, 12Z-octadecadienamide in L. meyenii was identified by TLC, and it was determined by HPLC. The results showed that the N-benzyl-9Z, 12Z-octadecadienamide identification of TLC was a strong mark and specificity. In content determination experiment, the linearity of N-benzyl-9Z, 12Z-octadecadienamide was in the range of 0.01-2 microg (r = 0.9998), and the average recovery (n=9) was 99.27% (RSD 2.0%). The methods were simple, accurate, with good reproducibility. It is suitable for quality control L. meyenii.

Vertical flight path steering system for aircraft

NASA Technical Reports Server (NTRS)

Lambregts, Antonius A. (Inventor)

1983-01-01

Disclosed is a vertical flight path angle steering system for aircraft, utilizing a digital flight control computer which processes pilot control inputs and aircraft response parameters into suitable elevator commands and control information for display to the pilot on a cathode ray tube. The system yields desirable airplane control handling qualities and responses as well as improvements in pilot workload and safety during airplane operation in the terminal area and under windshear conditions.

Research on Segmentation Monitoring Control of IA-RWA Algorithm with Probe Flow

NASA Astrophysics Data System (ADS)

Ren, Danping; Guo, Kun; Yao, Qiuyan; Zhao, Jijun

2018-04-01

The impairment-aware routing and wavelength assignment algorithm with probe flow (P-IA-RWA) can make an accurate estimation for the transmission quality of the link when the connection request comes. But it also causes some problems. The probe flow data introduced in the P-IA-RWA algorithm can result in the competition for wavelength resources. In order to reduce the competition and the blocking probability of the network, a new P-IA-RWA algorithm with segmentation monitoring-control mechanism (SMC-P-IA-RWA) is proposed. The algorithm would reduce the holding time of network resources for the probe flow. It segments the candidate path suitably for the data transmitting. And the transmission quality of the probe flow sent by the source node will be monitored in the endpoint of each segment. The transmission quality of data can also be monitored, so as to make the appropriate treatment to avoid the unnecessary probe flow. The simulation results show that the proposed SMC-P-IA-RWA algorithm can effectively reduce the blocking probability. It brings a better solution to the competition for resources between the probe flow and the main data to be transferred. And it is more suitable for scheduling control in the large-scale network.

An experimental study of cutting performances in machining of nimonic super alloy GH2312

NASA Astrophysics Data System (ADS)

Du, Jinfu; Wang, Xi; Xu, Min; Mao, Jin; Zhao, Xinglong

2018-05-01

Nimonic super alloy are extensively used in the aerospace industry because of its unique properties. As they are quite costly and difficult to machine, the machining tool is easy to get worn. To solve the problem, an experiment was carried out on a numerical control slitting automatic lathe to analysis the tool wearing conditions and parts' surface quality of nimonic super alloy GH2132 under different cutters. The selection of suitable cutter, reasonable cutting data and cutting speed is obtained and some conclusions are made. The excellent coating tool, compared with other hard alloy cutters, along with suitable cutting data will greatly improve the production efficiency and product quality, it can completely meet the process of nimonic super alloy GH2312.

Exploring the handshake in employment interviews.

PubMed

Stewart, Greg L; Dustin, Susan L; Barrick, Murray R; Darnold, Todd C

2008-09-01

The authors examined how an applicant's handshake influences hiring recommendations formed during the employment interview. A sample of 98 undergraduate students provided personality measures and participated in mock interviews during which the students received ratings of employment suitability. Five trained raters independently evaluated the quality of the handshake for each participant. Quality of handshake was related to interviewer hiring recommendations. Path analysis supported the handshake as mediating the effect of applicant extraversion on interviewer hiring recommendations, even after controlling for differences in candidate physical appearance and dress. Although women received lower ratings for the handshake, they did not on average receive lower assessments of employment suitability. Exploratory analysis suggested that the relationship between a firm handshake and interview ratings may be stronger for women than for men.

Forming n/p Junctions With An Excimer Laser

NASA Technical Reports Server (NTRS)

Alexander, Paul, Jr.; Campbell, Robert B.; Wong, David C.; Bottenberg, William L.; Byron, Stanley

1988-01-01

Compact equipment yields high-quality solar cells. Computer controls pulses of excimer laser and movement of silcon wafer. Mirrors direct laser beam to wafer. Lenses focus beam to small spot on surface. Process suitable for silicon made by dendritic-web-growth process.

Improvement, Verification, and Refinement of Spatially-Explicit Exposure Models in Risk Assessment - SEEM

DTIC Science & Technology

2015-06-01

hazard quotient HSI Habitat Suitability Index LOAEL lowest observed adverse effect level mg/kg milligrams per kilogram NOAEL no observed adverse... effect level NPL National Priorities List PRR Patuxent Research Refuge QA quality assurance QC quality control ACRONYMS AND...mean and maximum) for each individual for the exposure period; EHQs are then compiled to arrive at a modeled population— effects curve. Figure 1

Improvement, Verification, and Refinement of Spatially Explicit Exposure Models in Risk Assessment - SEEM Demonstration

DTIC Science & Technology

2015-06-01

hazard quotient HSI Habitat Suitability Index LOAEL lowest observed adverse effect level mg/kg milligrams per kilogram NOAEL no observed adverse... effect level NPL National Priorities List PRR Patuxent Research Refuge QA quality assurance QC quality control ACRONYMS AND...mean and maximum) for each individual for the exposure period; EHQs are then compiled to arrive at a modeled population— effects curve. Figure 1

Spring water quality and usability in the Mount Cameroon area revealed by hydrogeochemistry.

PubMed

Ako, Andrew Ako; Shimada, Jun; Hosono, Takahiro; Kagabu, Makoto; Ayuk, Akoachere Richard; Nkeng, George Elambo; Eyong, Gloria Eneke Takem; Fouepe Takounjou, Alain L

2012-10-01

Groundwater is the only reliable water resource for drinking, domestic, and agricultural purposes for the people living in the Mount Cameroon area. Hydrogeochemical and R-mode factor analysis were used to identify hydrogeochemical processes controlling spring water quality and assess its usability for the above uses. Main water types in the study area are Ca-Mg-HCO(3) and Na-HCO(3). This study reveals that three processes are controlling the spring water quality. CO(2)-driven silicate weathering and reverse cation exchange are the most important processes affecting the hydrochemistry of the spring waters. While tropical oceanic monsoon chloride-rich/sulfate-rich rainwater seems to affect spring water chemistry at low-altitude areas, strong correlations exist between major ions, dissolved silica and the altitude of springs. In general, the spring waters are suitable for drinking and domestic uses. Total hardness (TH) values indicate a general softness of the waters, which is linked to the development of cardiovascular diseases. Based on Na %, residual sodium carbonate, sodium adsorption ratio, and the USSL classification, the spring waters are considered suitable for irrigation. Though there is wide spread use of chemical fertilizers and intense urban settlements at the lower flanks of the volcano, anthropogenic activities for now seem to have little impact on the spring water quality.

Recycling of inorganic nutrients for hydroponic crop production following incineration of inedible biomass.

PubMed

Bubenheim, D L; Wignarajah, K

1997-01-01

The goal of resource recovery in a regenerative life support system is maintenance of product quality to sure support of reliable and predictable levels of life support function performance by the crop plant component. Further, these systems must be maintained over extended periods of time, requiring maintenance of nutrient solutions to avoid toxicity and deficiencies. The focus of this study was to determine the suitability of the ash product following incineration of inedible biomass as a source of inorganic nutrients for hydroponic crop production. Inedible wheat biomass was incinerated and ash quality characterized. The incinerator ash was dissolved in adequate nitric acid to establish a consistent nitrogen concentration is all nutrient solution treatments. Four experimental nutrient treatments were included: control, ash only, ash supplemented to match the control treatment, and ash only quality formulated with reagent grade chemicals. When nutrient solutions were formulated using only ash following incineration of inedible biomass, a balance in solution is established representing elemental retention following incineration and nutrient proportions present in the original biomass. The resulting solution is not identical to the control. This imbalance resulted in a suppression of crop growth. When the ash is supplemented with reagent grade chemicals to establish the same balance as in the control--growth is identical to the control. The ash appears to carry no phytotoxic materials. Growth in solution formulated with reagent grade chemicals but matching the quality of the ash only treatment resulted in similar growth to that of the ash only treatment. The ash product resulting from incineration of inedible biomass appears to be a suitable form for recycle of inorganic nutrients to crop production.

Benefits and Costs of Pulp and Paper Effluent Controls Under the Clean Water Act

NASA Astrophysics Data System (ADS)

Luken, Ralph A.; Johnson, F. Reed; Kibler, Virginia

1992-03-01

This study quantifies local improvements in environmental quality from controlling effluents in the pulp and paper industry. Although it is confined to a single industry, this study is the first effort to assess the actual net benefits of the Clean Water Act pollution control program. An assessment of water quality benefits requires linking regulatory policy, technical effects, and behavioral responses. Regulatory policies mandate specific controls that influence the quantity and nature of effluent discharges. We identify a subset of stream segments suitable for analysis, describe water quality simulations and control cost calculations under alternative regulatory scenarios, assign feasible water uses to each segment based on water quality, and determine probable upper bounds for the willingness of beneficiaries to pay. Because the act imposes uniform regulations that do not account for differences in compliance costs, existing stream quality, contributions of other effluent sources, and recreation potential, the relation between water quality benefits and costs varies widely across sites. This variation suggests that significant positive net benefits have probably been achieved in some cases, but we conclude that the costs of the Clean Water Act as a whole exceed likely benefits by a significant margin.

A New Type of Tea Baking Machine Based on Pro/E Design

NASA Astrophysics Data System (ADS)

Lin, Xin-Ying; Wang, Wei

2017-11-01

In this paper, the production process of wulong tea was discussed, mainly the effect of baking on the quality of tea. The suitable baking temperature of different tea was introduced. Based on Pro/E, a new type of baking machine suitable for wulong tea baking was designed. The working principle, mechanical structure and constant temperature timing intelligent control system of baking machine were expounded. Finally, the characteristics and innovation of new baking machine were discussed.The mechanical structure of this baking machine is more simple and reasonable, and can use the heat of the inlet and outlet, more energy saving and environmental protection. The temperature control part adopts fuzzy PID control, which can improve the accuracy and response speed of temperature control and reduce the dependence of baking operation on skilled experience.

75 FR 70206 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From Indonesia: Countervailing Duty Order... Indonesia. DATES: Effective Date: November 17, 2010. FOR FURTHER INFORMATION CONTACT: Gene Calvert or... from Indonesia. See Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed...

High-performance thin layer chromatography to assess pharmaceutical product quality.

PubMed

Kaale, Eliangiringa; Manyanga, Vicky; Makori, Narsis; Jenkins, David; Michael Hope, Samuel; Layloff, Thomas

2014-06-01

To assess the sustainability, robustness and economic advantages of high-performance thin layer chromatography (HPTLC) for quality control of pharmaceutical products. We compared three laboratories where three lots of cotrimoxazole tablets were assessed using different techniques for quantifying the active ingredient. The average assay relative standard deviation for the three lots was 1.2 with a range of 0.65-2.0. High-performance thin layer chromatography assessments are yielding valid results suitable for assessing product quality. The local pharmaceutical manufacturer had evolved the capacity to produce very high quality products. © 2014 John Wiley & Sons Ltd.

Increase in quantity and quality of suitable areas for invasive species as climate changes.

PubMed

Bertelsmeier, Cleo; Luque, Gloria M; Courchamp, Franck

2013-12-01

As climatically suitable range projections become increasingly used to assess distributions of species, we recommend systematic assessments of the quality of habitat in addition to the classical binary classification of habitat. We devised a method to assess occurrence probability, captured by a climatic suitability index, through which we could determine variations in the quality of potential habitat. This relative risk assessment circumvents the use of an arbitrary suitability threshold. We illustrated our method with 2 case studies on invasive ant species. We estimated invasion potential of the destroyer ant (Monomorium destructor) and the European fire ant (Myrmica rubra) on a global scale currently and by 2080 with climate change. We found that 21.1% of the world's landmass currently has a suitable climate for the destroyer ant and 16% has a suitable climate for European fire ant. Our climatic suitability index showed that both ant species would benefit from climate change, but in different ways. The size of the potential distribution increased by 35.8% for the destroyer ant. Meanwhile, the total area of potential distribution remained the same for the European fire ant (>0.05%), but the level of climatic suitability within this range increased greatly and led to an improvement in habitat quality (i.e., of invasive species' establishment likelihood). Either through quantity or quality of suitable areas, both invasive ant species are likely to increase the extent of their invasion in the future, following global climate change. Our results show that species may increase their range if either more areas become suitable or if the available areas present improved suitability. Studies in which an arbitrary suitability threshold was used may overlook changes in area quality within climatically suitable areas and as a result reach incorrect predictions. Incremento de la Cantidad y Calidad de Áreas Idóneas para Especies Invasoras a Medida que Cambia el Clima. © 2013 Society for Conservation Biology.

Segments from red blood cell units should not be used for quality testing.

PubMed

Kurach, Jayme D R; Hansen, Adele L; Turner, Tracey R; Jenkins, Craig; Acker, Jason P

2014-02-01

Nondestructive testing of blood components could permit in-process quality control and reduce discards. Tubing segments, generated during red blood cell (RBC) component production, were tested to determine their suitability as a sample source for quality testing. Leukoreduced RBC components were produced from whole blood (WB) by two different methods: WB filtration and buffy coat (BC). Components and their corresponding segments were tested on Days 5 and 42 of hypothermic storage (HS) for spun hematocrit (Hct), hemoglobin (Hb) content, percentage hemolysis, hematologic indices, and adenosine triphosphate concentration to determine whether segment quality represents unit quality. Segment samples overestimated hemolysis on Days 5 and 42 of HS in both BC- and WB filtration-produced RBCs (p < 0.001 for all). Hct and Hb levels in the segments were also significantly different from the units at both time points for both production methods (p < 0.001 for all). Indeed, for all variables tested different results were obtained from segment and unit samples, and these differences were not consistent across production methods. The quality of samples from tubing segments is not representative of the quality of the corresponding RBC unit. Segments are not suitable surrogates with which to assess RBC quality. © 2013 American Association of Blood Banks.

Hydrochemical and multivariate analysis of groundwater quality in the northwest of Sinai, Egypt.

PubMed

El-Shahat, M F; Sadek, M A; Salem, W M; Embaby, A A; Mohamed, F A

2017-08-01

The northwestern coast of Sinai is home to many economic activities and development programs, thus evaluation of the potentiality and vulnerability of water resources is important. The present work has been conducted on the groundwater resources of this area for describing the major features of groundwater quality and the principal factors that control salinity evolution. The major ionic content of 39 groundwater samples collected from the Quaternary aquifer shows high coefficients of variation reflecting asymmetry of aquifer recharge. The groundwater samples have been classified into four clusters (using hierarchical cluster analysis), these match the variety of total dissolvable solids, water types and ionic orders. The principal component analysis combined the ionic parameters of the studied groundwater samples into two principal components. The first represents about 56% of the whole sample variance reflecting a salinization due to evaporation, leaching, dissolution of marine salts and/or seawater intrusion. The second represents about 15.8% reflecting dilution with rain water and the El-Salam Canal. Most groundwater samples were not suitable for human consumption and about 41% are suitable for irrigation. However, all groundwater samples are suitable for cattle, about 69% and 15% are suitable for horses and poultry, respectively.

75 FR 59212 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the People's Republic of China: Final... suitable for high-quality print graphics using sheet-fed presses from the People's Republic of China (``PRC...-Fed Presses from the People's Republic of China: Preliminary Affirmative Countervailing Duty...

75 FR 55568 - Laminated Woven Sacks From the People's Republic of China: Preliminary Results of Antidumping...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-13

... that is suitable for high quality print graphics; \\8\\ printed with three colors or more in register... goods such as pet foods and bird seed. \\8\\ ``Paper suitable for high quality print graphics,'' as used.... Coated free sheet is an example of a paper suitable for high quality print graphics. Effective July 1...

Patient Suitability and Outcome in Short-Term Individual Psychotherapy.

ERIC Educational Resources Information Center

Piper, William E.; And Others

1990-01-01

Studied effects of short-term, dynamically oriented individual therapy and patient characteristic quality of object relations (QOR) in study involving 8 therapists and 144 psychiatric outpatients. Best results were attained by high QOR therapy patients; worst results were attained by low QOR control patients. Results were suggestive of optimal…

Assessment of a novel multi-array normalization method based on spike-in control probes suitable for microRNA datasets with global decreases in expression.

PubMed

Sewer, Alain; Gubian, Sylvain; Kogel, Ulrike; Veljkovic, Emilija; Han, Wanjiang; Hengstermann, Arnd; Peitsch, Manuel C; Hoeng, Julia

2014-05-17

High-quality expression data are required to investigate the biological effects of microRNAs (miRNAs). The goal of this study was, first, to assess the quality of miRNA expression data based on microarray technologies and, second, to consolidate it by applying a novel normalization method. Indeed, because of significant differences in platform designs, miRNA raw data cannot be normalized blindly with standard methods developed for gene expression. This fundamental observation motivated the development of a novel multi-array normalization method based on controllable assumptions, which uses the spike-in control probes to adjust the measured intensities across arrays. Raw expression data were obtained with the Exiqon dual-channel miRCURY LNA™ platform in the "common reference design" and processed as "pseudo-single-channel". They were used to apply several quality metrics based on the coefficient of variation and to test the novel spike-in controls based normalization method. Most of the considerations presented here could be applied to raw data obtained with other platforms. To assess the normalization method, it was compared with 13 other available approaches from both data quality and biological outcome perspectives. The results showed that the novel multi-array normalization method reduced the data variability in the most consistent way. Further, the reliability of the obtained differential expression values was confirmed based on a quantitative reverse transcription-polymerase chain reaction experiment performed for a subset of miRNAs. The results reported here support the applicability of the novel normalization method, in particular to datasets that display global decreases in miRNA expression similarly to the cigarette smoke-exposed mouse lung dataset considered in this study. Quality metrics to assess between-array variability were used to confirm that the novel spike-in controls based normalization method provided high-quality miRNA expression data suitable for reliable downstream analysis. The multi-array miRNA raw data normalization method was implemented in an R software package called ExiMiR and deposited in the Bioconductor repository.

Assessment of a novel multi-array normalization method based on spike-in control probes suitable for microRNA datasets with global decreases in expression

PubMed Central

2014-01-01

Background High-quality expression data are required to investigate the biological effects of microRNAs (miRNAs). The goal of this study was, first, to assess the quality of miRNA expression data based on microarray technologies and, second, to consolidate it by applying a novel normalization method. Indeed, because of significant differences in platform designs, miRNA raw data cannot be normalized blindly with standard methods developed for gene expression. This fundamental observation motivated the development of a novel multi-array normalization method based on controllable assumptions, which uses the spike-in control probes to adjust the measured intensities across arrays. Results Raw expression data were obtained with the Exiqon dual-channel miRCURY LNA™ platform in the “common reference design” and processed as “pseudo-single-channel”. They were used to apply several quality metrics based on the coefficient of variation and to test the novel spike-in controls based normalization method. Most of the considerations presented here could be applied to raw data obtained with other platforms. To assess the normalization method, it was compared with 13 other available approaches from both data quality and biological outcome perspectives. The results showed that the novel multi-array normalization method reduced the data variability in the most consistent way. Further, the reliability of the obtained differential expression values was confirmed based on a quantitative reverse transcription–polymerase chain reaction experiment performed for a subset of miRNAs. The results reported here support the applicability of the novel normalization method, in particular to datasets that display global decreases in miRNA expression similarly to the cigarette smoke-exposed mouse lung dataset considered in this study. Conclusions Quality metrics to assess between-array variability were used to confirm that the novel spike-in controls based normalization method provided high-quality miRNA expression data suitable for reliable downstream analysis. The multi-array miRNA raw data normalization method was implemented in an R software package called ExiMiR and deposited in the Bioconductor repository. PMID:24886675

RCL2, a potential formalin substitute for tissue fixation in routine pathological specimens.

PubMed

Masir, Noraidah; Ghoddoosi, Mahdiieh; Mansor, Suhada; Abdul-Rahman, Faridah; Florence, Chandramaya S; Mohamed-Ismail, Nor Azlin; Tamby, Mohammad-Rafaee; Md-Latar, Nani Harlina

2012-04-01

To investigate RCL2 as a fixative for tissue fixation in routine histopathological examination and to assess tissue suitability for ancillary investigations.   Forty-nine samples from 36 fresh specimens were cut into three equal pieces and fixed in RCL2 diluted in 100% ethanol, RCL2 in 95% ethanol, or neutral buffered formalin as control. Suitability for microtomy, quality of histomorphology, histochemistry, immunohistochemistry, fluorescent and silver in-situ hybridization analysis and extracted genomic DNA were assessed. Microtomy was straightforward in most tissue blocks, but there was difficulty in cutting in approximately a quarter of samples, which required careful handling by an experienced technician. There were no significant differences in tissue morphology between RCL2- and formalin-fixed tissues (P=0.08). Generally, the quality of histochemical staining, immunohistochemistry and in-situ hybridization were comparable to that of formalin-fixed tissues. Inconsistent immunoreactivity was noted, however, with antibodies against pan-cytokeratin and progesterone receptor. Genomic DNA concentration was higher in RCL2-fixed tissues. Using RCL2 diluted in 95% ethanol did not affect fixation quality. RCL2 is a potential formalin substitute suitable as a fixative for use in routine histopathological examination; however, difficulty in microtomy and occasional discrepancies in immunohistochemical reactivity require further optimization of the methodology. © 2012 Blackwell Publishing Ltd.

Accelerated development and flight evaluation of active controls concepts for subsonic transport aircraft. Volume 2: AFT C.G. simulation and analysis

NASA Technical Reports Server (NTRS)

Urie, D. M.

1979-01-01

Relaxed static stability and stability augmentation with active controls were investigated for subsonic transport aircraft. Analytical and simulator evaluations were done using a contemporary wide body transport as a baseline. Criteria for augmentation system performance and unaugmented flying qualities were evaluated. Augmentation control laws were defined based on selected frequency response and time history criteria. Flying qualities evaluations were conducted by pilots using a moving base simulator with a transport cab. Static margin and air turbulence intensity were varied in test with and without augmentation. Suitability of a simple pitch control law was verified at neutral static margin in cruise and landing flight tasks. Neutral stability was found to be marginally acceptable in heavy turbulence in both cruise and landing conditions.

[Optimization of Glycyrrhiza flavonoid and ferulic acid cream by reflect-line orthogonal simplex method].

PubMed

Liu, Sheng; Xie, Jun; Chen, Xiangqing; Yang, Liqiang; Su, Dan; Fang, Yan; Yu, Na; Fang, Wei

2010-02-01

To optimize the formula of Glycyrrhiza flavonoid and ferulic acid cream and set up its quality control parameters. Reflect-line orthogonal simplex method was used to optimize the main factors such as amount of Myrj52-glyceryl monostearate and dimethicone, based on the appearance, spreadability and stability of the cream. 9.0% Myrj52-glyceryl monostearate (3:2) and 2.5% dimethicone were chosen in prescription. The prepared cream presented a good stability after being placed 24 h at 5 degrees C, 25 degrees C and 37 degrees C respectively,and its spreadability suited with the property of semi-fluid cream. [corrected] The formula of Glycyrrhiza flavonoid and ferulic acid cream is suitable, and its quality is stable. The reflect-line orthogonal simplex method is suitable for the formula optimization of cream.

Using fuzzy logic analysis for siting decisions of infiltration trenches for highway runoff control.

PubMed

Ki, Seo Jin; Ray, Chittaranjan

2014-09-15

Determining optimal locations for best management practices (BMPs), including their field considerations and limitations, plays an important role for effective stormwater management. However, these issues have been often overlooked in modeling studies that focused on downstream water quality benefits. This study illustrates the methodology of locating infiltration trenches at suitable locations from spatial overlay analyses which combine multiple layers that address different aspects of field application into a composite map. Using seven thematic layers for each analysis, fuzzy logic was employed to develop a site suitability map for infiltration trenches, whereas the DRASTIC method was used to produce a groundwater vulnerability map on the island of Oahu, Hawaii, USA. In addition, the analytic hierarchy process (AHP), one of the most popular overlay analyses, was used for comparison to fuzzy logic. The results showed that the AHP and fuzzy logic methods developed significantly different index maps in terms of best locations and suitability scores. Specifically, the AHP method provided a maximum level of site suitability due to its inherent aggregation approach of all input layers in a linear equation. The most eligible areas in locating infiltration trenches were determined from the superposition of the site suitability and groundwater vulnerability maps using the fuzzy AND operator. The resulting map successfully balanced qualification criteria for a low risk of groundwater contamination and the best BMP site selection. The results of the sensitivity analysis showed that the suitability scores were strongly affected by the algorithms embedded in fuzzy logic; therefore, caution is recommended with their use in overlay analysis. Accordingly, this study demonstrates that the fuzzy logic analysis can not only be used to improve spatial decision quality along with other overlay approaches, but also is combined with general water quality models for initial and refined searches for the best locations of BMPs at the sub-basin level. Copyright © 2014. Published by Elsevier B.V.

Protein quality control system in neurodegeneration: a healing company hard to beat but failure is fatal.

PubMed

Chhangani, Deepak; Mishra, Amit

2013-08-01

A common feature in most neurodegenerative diseases and aging is the progressive accumulation of damaged proteins. Proteins are essential for all crucial biological functions. Under some notorious conditions, proteins loss their three dimensional native conformations and are converted into disordered aggregated structures. Such changes rise into pathological conditions and eventually cause serious protein conformation disorders. Protein aggregation and inclusion bodies formation mediated multifactorial proteotoxic stress has been reported in the progression of Parkinson's disease (PD), Huntington's disease (HD), Alzheimer's disease (AD), amyotrophic lateral sclerosis (ALS) and Prion disease. Ongoing studies have been remarkably informative in providing a systematic outlook for better understanding the concept and fundamentals of protein misfolding and aggregations. However, the precise role of protein quality control system and precursors of this mechanism remains elusive. In this review, we highlight recent insights and discuss emerging cytoprotective strategies of cellular protein quality control system implicated in protein deposition diseases. Our current review provides a clear, understandable framework of protein quality control system that may offer the more suitable therapeutic strategies for protein-associated diseases.

Approaches to quality management and accreditation in a genetic testing laboratory

PubMed Central

Berwouts, Sarah; Morris, Michael A; Dequeker, Elisabeth

2010-01-01

Medical laboratories, and specifically genetic testing laboratories, provide vital medical services to different clients: clinicians requesting a test, patients from whom the sample was collected, public health and medical-legal instances, referral laboratories and authoritative bodies. All expect results that are accurate and obtained in an efficient and effective manner, within a suitable time frame and at acceptable cost. There are different ways of achieving the end results, but compliance with International Organization for Standardization (ISO) 15189, the international standard for the accreditation of medical laboratories, is becoming progressively accepted as the optimal approach to assuring quality in medical testing. We present recommendations and strategies designed to aid genetic testing laboratories with the implementation of a quality management system, including key aspects such as document control, external quality assessment, internal quality control, internal audit, management review, validation, as well as managing the human side of change. The focus is on pragmatic approaches to attain the levels of quality management and quality assurance required for accreditation according to ISO 15189, within the context of genetic testing. Attention is also given to implementing efficient and effective quality improvement. PMID:20720559

Understanding biomaterial-tissue interface quality: combined in vitro evaluation

NASA Astrophysics Data System (ADS)

Gasik, Michael

2017-12-01

One of the greatest challenges in the development of new medical products and devices remains in providing maximal patient safety, efficacy and suitability for the purpose. A 'good quality' of the tissue-implant interface is one of the most critical factors for the success of the implant integration. In this paper this challenge is being discussed from the point of view of basic stimuli combination to experimental testing. The focus is in particular on bacterial effects on tissue-implant interaction (for different materials). The demonstration of the experimental evaluation of the tissue-implant interface is for dental abutment with mucosal contact. This shows that testing of the interface quality could be the most relevant in controlled conditions, which mimic as possible the clinical applications, but consider variables being under the control of the evaluator.

Development, optimization and validation of gas chromatographic fingerprinting of Brazilian commercial diesel fuel for quality control.

PubMed

dos Santos, Bruno César Diniz Brito; Flumignan, Danilo Luiz; de Oliveira, José Eduardo

2012-10-01

A three-step development, optimization and validation strategy is described for gas chromatography (GC) fingerprints of Brazilian commercial diesel fuel. A suitable GC-flame ionization detection (FID) system was selected to assay a complex matrix such as diesel. The next step was to improve acceptable chromatographic resolution with reduced analysis time, which is recommended for routine applications. Full three-level factorial designs were performed to improve flow rate, oven ramps, injection volume and split ratio in the GC system. Finally, several validation parameters were performed. The GC fingerprinting can be coupled with pattern recognition and multivariate regressions analyses to determine fuel quality and fuel physicochemical parameters. This strategy can also be applied to develop fingerprints for quality control of other fuel types.

SMALL MAMMALS: CONSEQUENCES OF STOCHASTIC DATA VARIATION FOR MODELING INDICATORS OF HABITAT SUITABILITY FOR A WELL-STUDIED RESOURCE

EPA Science Inventory

Increasingly, models of physical habitat variables (i.e. vegetation, soil) are utilized as indicators of small mammal habitat suitability or quality. Presumably, use of physical habitat models indicating habitat suitability or quality would be improved and enhanced by the extens...

Assessment of water quality and suitability analysis of River Ganga in Rishikesh, India

NASA Astrophysics Data System (ADS)

Haritash, A. K.; Gaur, Shalini; Garg, Sakshi

2016-11-01

The water samples were collected from River Ganga in Rishikesh during December 2008 to assess its suitability for drinking, irrigation, and industrial usages using various indices. Based on the values obtained and suggested designated best use, water in upper segment can be used for drinking but after disinfection (Class A); organized outdoor bathing in middle segment (Class B); and can be used as drinking water source (Class C) in lower segment in Rishikesh. All the parameters were within the specified limits for drinking water quality except E. coli. The indices of suitability for irrigation and industrial application were also evaluated. The irrigation quality ranged from good to excellent at almost all places with the exception of percent sodium. The abundance of major ions followed K+> Ca2+> Cl- > HCO3 - > Na+> Mg2+> CO3 2- trend. The major cations suggested that the water is alkaline (Na + K) than alkaline earth (Ca + Mg) type. The heavy metals (Pb, Cu, Zn, Ni) were found either absent or within the limits specified. There was no specific industrial input of pollutants. Industrial applications of the river water should be limited since the water was found to be aggressive, based on Langelier saturation index (0.3) and Ryznar stability index (8.8), with the problem of heavy to intolerable corrosion. Water quality of Ganga in Rishikesh was good with exception of most probable number (MPN) which needs regular monitoring and measures to control.

The Use of EST Expression Matrixes for the Quality Control of Gene Expression Data

PubMed Central

Milnthorpe, Andrew T.; Soloviev, Mikhail

2012-01-01

EST expression profiling provides an attractive tool for studying differential gene expression, but cDNA libraries' origins and EST data quality are not always known or reported. Libraries may originate from pooled or mixed tissues; EST clustering, EST counts, library annotations and analysis algorithms may contain errors. Traditional data analysis methods, including research into tissue-specific gene expression, assume EST counts to be correct and libraries to be correctly annotated, which is not always the case. Therefore, a method capable of assessing the quality of expression data based on that data alone would be invaluable for assessing the quality of EST data and determining their suitability for mRNA expression analysis. Here we report an approach to the selection of a small generic subset of 244 UniGene clusters suitable for identification of the tissue of origin for EST libraries and quality control of the expression data using EST expression information alone. We created a small expression matrix of UniGene IDs using two rounds of selection followed by two rounds of optimisation. Our selection procedures differ from traditional approaches to finding “tissue-specific” genes and our matrix yields consistency high positive correlation values for libraries with confirmed tissues of origin and can be applied for tissue typing and quality control of libraries as small as just a few hundred total ESTs. Furthermore, we can pick up tissue correlations between related tissues e.g. brain and peripheral nervous tissue, heart and muscle tissues and identify tissue origins for a few libraries of uncharacterised tissue identity. It was possible to confirm tissue identity for some libraries which have been derived from cancer tissues or have been normalised. Tissue matching is affected strongly by cancer progression or library normalisation and our approach may potentially be applied for elucidating the stage of normalisation in normalised libraries or for cancer staging. PMID:22412959

The quality and suitability of written educational materials for patients*.

PubMed

Demir, Fatma; Ozsaker, Esma; Ilce, Arzu Ozcan

2008-01-01

In this study, the quality and suitability of written educational materials being used for the education of patients in surgical departments of hospitals were studied. In the literature, it is stated that most of the educational materials for patients are not suitable from the aspects of contents, structure, design, composition and language. In this descriptive type study, which was carried out between March and May 2006, 59 examples of written educational material used for patient education at 138 surgical clinics were evaluated for quality and suitability. The written educational materials obtained were evaluated independently by researchers from the aspect of quality and suitability. The DISCERN measuring instrument was used in the evaluation of the reliability of the written educational materials and the Evaluation of the Suitability of Written Materials form was used in the evaluation of suitability. It was determined that the educational materials received low scores for reliability and information quality. It was determined that the total scores for the written educational materials were average for suitability. It was determined that there were no written educational materials in more than half of the surgical units included in the study. It was also found that the educational materials had serious deficiencies. This study showed that there was no adequate written patient educational material at the clinics. This deficiency in written educational materials could be eliminated by having them prepared by health professionals in accordance with guidebooks and taking the target group into account.

Cell Line Controls for the Genotyping of a Spectrum of Human Single Nucleotide Polymorphisms in the Clinical Laboratory.

PubMed

Kimbacher, Christine; Paar, Christian; Freystetter, Andrea; Berg, Joerg

2018-05-01

Genotyping for clinically important single nucleotide polymorphisms (SNPs) is performed by many clinical routine laboratories. To support testing, quality controls and reference materials are needed. Those may be derived from residual patient samples, left over samples of external quality assurance schemes, plasmid DNA or DNA from cell lines. DNAs from cell lines are commutable and available in large amounts. DNA from 38 cell lines were examined for suitability as controls in 11 SNP assays that are frequently used in a clinical routine laboratory: FV (1691G>A), FII (20210G>A), PAI-1 4G/5G polymorphism, MTHFR (677C>T, 1298A>C), HFE (H63D, S65C, C282Y), APOE (E2, E3, E4), LPH (-13910C>T), UGT1A1 (*28, *36, *37), TPMT (*2, *3A, *3B, *3C), VKORC1 (-1639G>A, 1173C>T), CYP2C9 (*2, *3, *5). Genotyping was performed by real-time PCR with melting curve analysis and confirmed by bi-directional sequencing. We find an almost complete spectrum of genotypic constellations within these 38 cell lines. About 12 cell lines appear sufficient as genotypic controls for the 11 SNP assays by covering almost all of the genotypes. However, hetero- and homozygous genotypes for FII and the alleles TPMT*2, UGT1A1*37 and CYP2C9*5 were not detected in any of the cell lines. DNA from most of the examined cell lines appear suitable as quality controls for these SNP assays in the laboratory routine, as to the implementation of those assays or to prepare samples for quality assurance schemes. Our study may serve as a pilot to further characterize these cell lines to arrive at the status of reference materials.

Quality assessment concept of the World Data Center for Climate and its application to CMIP5 data

NASA Astrophysics Data System (ADS)

Stockhause, M.; Höck, H.; Toussaint, F.; Lautenschlager, M.

2012-08-01

The preservation of data in a high state of quality which is suitable for interdisciplinary use is one of the most pressing and challenging current issues in long-term archiving. For high volume data such as climate model data, the data and data replica are no longer stored centrally but distributed over several local data repositories, e.g. the data of the Climate Model Intercomparison Project Phase 5 (CMIP5). The most important part of the data is to be archived, assigned a DOI, and published according to the World Data Center for Climate's (WDCC) application of the DataCite regulations. The integrated part of WDCC's data publication process, the data quality assessment, was adapted to the requirements of a federated data infrastructure. A concept of a distributed and federated quality assessment procedure was developed, in which the workload and responsibility for quality control is shared between the three primary CMIP5 data centers: Program for Climate Model Diagnosis and Intercomparison (PCMDI), British Atmospheric Data Centre (BADC), and WDCC. This distributed quality control concept, its pilot implementation for CMIP5, and first experiences are presented. The distributed quality control approach is capable of identifying data inconsistencies and to make quality results immediately available for data creators, data users and data infrastructure managers. Continuous publication of new data versions and slow data replication prevents the quality control from check completion. This together with ongoing developments of the data and metadata infrastructure requires adaptations in code and concept of the distributed quality control approach.

75 FR 70205 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From Indonesia: Antidumping Duty Order... Indonesia. DATES: Effective Date: November 17, 2010. FOR FURTHER INFORMATION CONTACT: Gemal Brangman or... duty investigation of certain coated paper from Indonesia. See Certain Coated Paper Suitable for High...

The derivation of water quality criteria of copper in Biliu River

NASA Astrophysics Data System (ADS)

Zheng, Hongbo; Jia, Xinru

2018-03-01

Excessive copper in water can be detrimental to the health of human and aquatic life. China has promulgated Environmental Quality Standards for Surface Water to control water pollution, but uniform standard values may cause under-protection or over-protection. Therefore, the basic research work on water quality criteria of water source or reservoir is urgently needed. This study deduces the acute and chronic Water Quality Criteria (WQC) of copper in Biliu River by Species Sensitivity Distribution method (SSD). The result shows that BiDoseResp is the most suitable model and the acute and chronic water quality benchmark of copper are 10.72 µg•L-1 and 5.86 µg•L-1. This study provides basis for the construction of water quality standard of Liaoning and the environmental management of Biliu River.

Prediction of ground water quality index to assess suitability for drinking purposes using fuzzy rule-based approach

NASA Astrophysics Data System (ADS)

Gorai, A. K.; Hasni, S. A.; Iqbal, Jawed

2016-11-01

Groundwater is the most important natural resource for drinking water to many people around the world, especially in rural areas where the supply of treated water is not available. Drinking water resources cannot be optimally used and sustained unless the quality of water is properly assessed. To this end, an attempt has been made to develop a suitable methodology for the assessment of drinking water quality on the basis of 11 physico-chemical parameters. The present study aims to select the fuzzy aggregation approach for estimation of the water quality index of a sample to check the suitability for drinking purposes. Based on expert's opinion and author's judgement, 11 water quality (pollutant) variables (Alkalinity, Dissolved Solids (DS), Hardness, pH, Ca, Mg, Fe, Fluoride, As, Sulphate, Nitrates) are selected for the quality assessment. The output results of proposed methodology are compared with the output obtained from widely used deterministic method (weighted arithmetic mean aggregation) for the suitability of the developed methodology.

Information integration and diagnosis analysis of equipment status and production quality for machining process

NASA Astrophysics Data System (ADS)

Zan, Tao; Wang, Min; Hu, Jianzhong

2010-12-01

Machining status monitoring technique by multi-sensors can acquire and analyze the machining process information to implement abnormity diagnosis and fault warning. Statistical quality control technique is normally used to distinguish abnormal fluctuations from normal fluctuations through statistical method. In this paper by comparing the advantages and disadvantages of the two methods, the necessity and feasibility of integration and fusion is introduced. Then an approach that integrates multi-sensors status monitoring and statistical process control based on artificial intelligent technique, internet technique and database technique is brought forward. Based on virtual instrument technique the author developed the machining quality assurance system - MoniSysOnline, which has been used to monitoring the grinding machining process. By analyzing the quality data and AE signal information of wheel dressing process the reason of machining quality fluctuation has been obtained. The experiment result indicates that the approach is suitable for the status monitoring and analyzing of machining process.

21 CFR 111.90 - What requirements apply to treatments, in-process adjustments, and reprocessing when there is a...

Code of Federal Regulations, 2010 CFR

2010-04-01

... MANUFACTURING PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS... rejected dietary supplement or treat or provide an in-process adjustment to a component, packaging, or label to make it suitable for use in the manufacture of a dietary supplement unless: (1) Quality control...

A new method for long-term storage of titred microbial standard solutions suitable for microbiologic quality control activities of pharmaceutical companies.

PubMed

Chiellini, Carolina; Mocali, Stefano; Fani, Renato; Ferro, Iolanda; Bruschi, Serenella; Pinzani, Alessandro

2016-08-01

Commercially available lyophilized microbial standards are expensive and subject to reduction in cell viability due to freeze-drying stress. Here we introduce an inexpensive and straightforward method for in-house microbial standard preparation and cryoconservation that preserves constant cell titre and cell viability over 14 months.

Freezing Point of Milk: A Natural Way to Understand Colligative Properties

ERIC Educational Resources Information Center

Novo, Mercedes; Reija, Belen; Al-Soufi, Wajih

2007-01-01

A laboratory experiment is presented in which the freezing point depression is analyzed using milk as solution. The nature of milk as a mixture of different solutes makes it a suitable probe to learn about colligative properties. The first part of the experiment illustrates the analytical use of freezing point measurements to control milk quality,…

Instrumental color control for metallic coatings

NASA Astrophysics Data System (ADS)

Chou, W.; Han, Bing; Cui, Guihua; Rigg, Bryan; Luo, Ming R.

2002-06-01

This paper describes work investigating a suitable color quality control method for metallic coatings. A set of psychological experiments was carried out based upon 50 pairs of samples. The results were used to test the performance of various color difference formulae. Different techniques were developed by optimising the weights and/or the lightness parametric factors of colour differences calculated from the four measuring angles. The results show that the new techniques give a significant improvement compared to conventional techniques.

Fluorescence excitation-emission matrix (EEM) spectroscopy for rapid identification and quality evaluation of cell culture media components.

PubMed

Li, Boyan; Ryan, Paul W; Shanahan, Michael; Leister, Kirk J; Ryder, Alan G

2011-11-01

The application of fluorescence excitation-emission matrix (EEM) spectroscopy to the quantitative analysis of complex, aqueous solutions of cell culture media components was investigated. These components, yeastolate, phytone, recombinant human insulin, eRDF basal medium, and four different chemically defined (CD) media, are used for the formulation of basal and feed media employed in the production of recombinant proteins using a Chinese Hamster Ovary (CHO) cell based process. The comprehensive analysis (either identification or quality assessment) of these materials using chromatographic methods is time consuming and expensive and is not suitable for high-throughput quality control. The use of EEM in conjunction with multiway chemometric methods provided a rapid, nondestructive analytical method suitable for the screening of large numbers of samples. Here we used multiway robust principal component analysis (MROBPCA) in conjunction with n-way partial least squares discriminant analysis (NPLS-DA) to develop a robust routine for both the identification and quality evaluation of these important cell culture materials. These methods are applicable to a wide range of complex mixtures because they do not rely on any predetermined compositional or property information, thus making them potentially very useful for sample handling, tracking, and quality assessment in biopharmaceutical industries.

[Which one is more important, raw materials or productive technology?--a case study for quality consistency control of Gegen Qinlian decoction].

PubMed

Zhong, Wen; Chen, Sha; Zhang, Jun; Wang, Yu-Sheng; Liu, An

2016-03-01

To investigate the effect of Chinese medicine raw materials and production technology on quality consistency of Chinese patent medicines with Gegen Qinlian decoction as an example, and establish a suitable method for the quality consistency control of Chinese patent medicines. The results showed that the effect of production technology on the quality consistency was generally not more than 5%, while the effect of raw materials was even more than 30%, indicating that the effect of raw materials was much greater than that of the production technology. In this study, blend technology was used to improve the quality consistency of raw materials. As a result, the difference between the product produced by raw materials and reference groups was less than 5%, thus increasing the quality consistence of finished products. The results showed that under the current circumstances, the main factor affecting the quality consistency of Chinese patent medicines was raw materials, so we shall pay more attention to the quality of Chinese medicine's raw materials. Finally, a blend technology can improve the quality consistency of Chinese patent medicines. Copyright© by the Chinese Pharmaceutical Association.

Novel Driving Control of Power Assisted Wheelchair Based on Minimum Jerk Trajectory

NASA Astrophysics Data System (ADS)

Seki, Hirokazu; Sugimoto, Takeaki; Tadakuma, Susumu

This paper describes a novel trajectory control scheme for power assisted wheelchair. Human input torque patterns are always intermittent in power assisted wheelchairs, therefore, the suitable trajectories must be generated also after the human decreases his/her input torque. This paper tries to solve this significant problem based on minimum jerk model minimizing the changing rate of acceleration. The proposed control system based on minimum jerk trajectory is expected to improve the ride quality, stability and safety. Some experiments show the effectiveness of the proposed method.

Flight test results for several light, canard-configured airplanes

NASA Technical Reports Server (NTRS)

Brown, Philip W.

1987-01-01

Brief flight evaluations of two different, light, composite constructed, canard and winglet configured airplanes were performed to assess their handling qualities; one airplane was a single engine, pusher design and the other a twin engine, push-pull configuration. An emphasis was placed on the slow speed/high angle of attack region for both airplanes and on the engine-out regime for the twin. Mission suitability assessment included cockpit and control layout, ground and airborne handling qualities, and turbulence response. Very limited performance data was taken. Stall/spin tests and the effects of laminar flow loss on performance and handling qualities were assessed on an extended range, single engine pusher design.

Formaldehyde Concentration Dynamics of the International Space Station Cabin Atmosphere

NASA Technical Reports Server (NTRS)

Perry, J. L.

2005-01-01

Formaldehyde presents a significant challenge to maintaining cabin air quality on board crewed spacecraft. Generation sources include offgassing from a variety of non-metallic materials as well as human metabolism. Because generation sources are pervasive and human health can be affected by continual exposure to low concentrations, toxicology and air quality control engineering experts jointly identified formaldehyde as a key compound to be monitored as part the International Space Station's (ISS) environmental health monitoring and maintenance program. Data acquired from in-flight air quality monitoring methods are the basis for assessing the cabin environment's suitability for long-term habitation and monitoring the performance of passive and active controls that are in place to minimize crew exposure. Formaldehyde concentration trends and dynamics served in the ISS cabin atmosphere are reviewed implications to present and future flight operations discussed.

Piloting Vertical Flight Aircraft: A Conference on Flying Qualities and Human Factors

NASA Technical Reports Server (NTRS)

Blanken, Christopher L. (Editor); Whalley, Matthew S. (Editor)

1993-01-01

This document contains papers from a specialists' meeting entitled 'Piloting Vertical Flight Aircraft: A Conference on Flying Qualities and Human Factors.' Vertical flight aircraft, including helicopters and a variety of Vertical Takeoff and Landing (VTOL) concepts, place unique requirements on human perception, control, and performance for the conduct of their design missions. The intent of this conference was to examine, for these vehicles, advances in: (1) design of flight control systems for ADS-33C standards; (2) assessment of human factors influences of cockpit displays and operational procedures; (3) development of VTOL design and operational criteria; and (4) development of theoretical methods or models for predicting pilot/vehicle performance and mission suitability. A secondary goal of the conference was to provide an initial venue for enhanced interaction between human factors and handling qualities specialists.

Evaluation of groundwater quality and its suitability for drinking and agricultural use in Thanjavur city, Tamil Nadu, India.

PubMed

Nagarajan, R; Rajmohan, N; Mahendran, U; Senthamilkumar, S

2010-12-01

As groundwater is a vital source of water for domestic and agricultural activities in Thanjavur city due to lack of surface water resources, groundwater quality and its suitability for drinking and agricultural usage were evaluated. In this study, 102 groundwater samples were collected from dug wells and bore wells during March 2008 and analyzed for pH, electrical conductivity, temperature, major ions, and nitrate. Results suggest that, in 90% of groundwater samples, sodium and chloride are predominant cation and anion, respectively, and NaCl and CaMgCl are major water types in the study area. The groundwater quality in the study site is impaired by surface contamination sources, mineral dissolution, ion exchange, and evaporation. Nitrate, chloride, and sulfate concentrations strongly express the impact of surface contamination sources such as agricultural and domestic activities, on groundwater quality, and 13% of samples have elevated nitrate content (>45 mg/l as NO(3)). PHREEQC code and Gibbs plots were employed to evaluate the contribution of mineral dissolution and suggest that mineral dissolution, especially carbonate minerals, regulates water chemistry. Groundwater suitability for drinking usage was evaluated by the World Health Organization and Indian standards and suggests that 34% of samples are not suitable for drinking. Integrated groundwater suitability map for drinking purposes was created using drinking water standards based on a concept that if the groundwater sample exceeds any one of the standards, it is not suitable for drinking. This map illustrates that wells in zones 1, 2, 3, and 4 are not fit for drinking purpose. Likewise, irrigational suitability of groundwater in the study region was evaluated, and results suggest that 20% samples are not fit for irrigation. Groundwater suitability map for irrigation was also produced based on salinity and sodium hazards and denotes that wells mostly situated in zones 2 and 3 are not suitable for irrigation. Both integrated suitability maps for drinking and irrigation usage provide overall scenario about the groundwater quality in the study area. Finally, the study concluded that groundwater quality is impaired by man-made activities, and proper management plan is necessary to protect valuable groundwater resources in Thanjavur city.

Quality evaluation of Desmodium styracifolium using high-performance liquid chromatography with photodiode array detection and electrospray ionisation tandem mass spectrometry.

PubMed

Zhou, Chan; Luo, Jian-Guang; Kong, Ling-Yi

2012-01-01

Desmodium styracifolium, with C-flavone glycosides as main pharmacological effective compounds, is a popular Chinese medicinal herb and has been used to treat urination disturbance, urolithiasis, edema and jaundice. However, few systematic methods have been reported on the quality control of this natural herb. To develop a method for control the quality of D. styracifolium by combining chromatographic fingerprints and major constituent quantification. Separations were performed on an Ultimate XB-C-18 column by gradient elution using acetonitrile and 0.1% aqueous formic acid. Analytes were identified by HPLC coupled with electrospray ionisation mass spectrometry experiments. Twenty common peaks in chromatographic fingerprints were first identified among 15 batches of D. styracifolium from various regions. On basis of this, a HPLC-PAD method was established to simultaneously quantify five major constituents, which was validated for limit of qualification, linearity and interday variation of precision and accuracy. The assay developed could be considered as a suitable quality control method of D. styracifolium. Copyright © 2011 John Wiley & Sons, Ltd.

Cairo consensus on the IVF laboratory environment and air quality: report of an expert meeting.

PubMed

Mortimer, D; Cohen, J; Mortimer, S T; Fawzy, M; McCulloh, D H; Morbeck, D E; Pollet-Villard, X; Mansour, R T; Brison, D R; Doshi, A; Harper, J C; Swain, J E; Gilligan, A V

2018-03-02

This proceedings report presents the outcomes from an international Expert Meeting to establish a consensus on the recommended technical and operational requirements for air quality within modern assisted reproduction technology (ART) laboratories. Topics considered included design and construction of the facility, as well as its heating, ventilation and air conditioning system; control of particulates, micro-organisms (bacteria, fungi and viruses) and volatile organic compounds (VOCs) within critical areas; safe cleaning practices; operational practices to optimize air quality while minimizing physicochemical risks to gametes and embryos (temperature control versus air flow); and appropriate infection-control practices that minimize exposure to VOC. More than 50 consensus points were established under the general headings of assessing site suitability, basic design criteria for new construction, and laboratory commissioning and ongoing VOC management. These consensus points should be considered as aspirational benchmarks for existing ART laboratories, and as guidelines for the construction of new ART laboratories. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Quality control of FWC during assembly and commissioning in SST-1 Tokamak

NASA Astrophysics Data System (ADS)

Patel, Hitesh; Santra, Prosenjit; Parekh, Tejas; Biswas, Prabal; Jayswal, Snehal; Chauhan, Pradeep; Paravastu, Yuvakiran; George, Siju; Semwal, Pratibha; Thankey, Prashant; Ramesh, Gattu; Prakash, Arun; Dhanani, Kalpesh; Raval, D. C.; Khan, Ziauddin; Pradhan, Subrata

2017-04-01

First Wall Components (FWC) of SST-1 tokamak, which are in the immediate vicinity of plasma, comprises of limiters, divertors, baffles, passive stabilizers designed to operate long duration (∼1000 s) discharges of elongated plasma. All FWC consist of copper alloy heat sink modules with SS cooling tubes brazed onto it, graphite tiles acting as armour material facing the plasma, and are mounted to the vacuum vessels with suitable Inconel support structures at inter-connected ring & port locations. The FWC are very recently assembled and commissioned successfully inside the vacuum vessel of SST-1 undergoing a rigorous quality control and checks at every stage of the assembly process. This paper will present the quality control aspects and checks of FWC from commencement of assembly procedure, namely material test reports, leak testing of high temperature baked components, assembled dimensional tolerances, leak testing of all welded joints, graphite tile tightening torques, electrical continuity and electrical isolation of passive stabilizers from vacuum vessel, baking and cooling hydraulic connections inside vacuum vessel.

Predicting Software Suitability Using a Bayesian Belief Network

NASA Technical Reports Server (NTRS)

Beaver, Justin M.; Schiavone, Guy A.; Berrios, Joseph S.

2005-01-01

The ability to reliably predict the end quality of software under development presents a significant advantage for a development team. It provides an opportunity to address high risk components earlier in the development life cycle, when their impact is minimized. This research proposes a model that captures the evolution of the quality of a software product, and provides reliable forecasts of the end quality of the software being developed in terms of product suitability. Development team skill, software process maturity, and software problem complexity are hypothesized as driving factors of software product quality. The cause-effect relationships between these factors and the elements of software suitability are modeled using Bayesian Belief Networks, a machine learning method. This research presents a Bayesian Network for software quality, and the techniques used to quantify the factors that influence and represent software quality. The developed model is found to be effective in predicting the end product quality of small-scale software development efforts.

Identification of surface water-groundwater interaction by hydrogeochemical indicators and assessing its suitability for drinking and irrigational purposes in Chennai, Southern India

NASA Astrophysics Data System (ADS)

Brindha, K.; Neena Vaman, K. V.; Srinivasan, K.; Sathis Babu, M.; Elango, L.

2014-06-01

Large cities face water quality and quantity problems due to increasing population and improper disposal of solid and liquid wastes. It is essential to monitor the water quality to take corrective measures. This study was carried out in one of the densely populated metropolitan cities in India to ascertain the suitability of groundwater for drinking and irrigation activity, identify the processes controlling the geochemistry of groundwater and the impact of Adyar River on the groundwater quality. Magnesium and pH concentration in groundwater of this area were within the maximum permissible limits of WHO standards. Sodium and potassium concentration of groundwater were greater than the permissible limit in 30.8 % and in 50 % of the samples, respectively. About 35 % of the groundwater samples were not permissible for drinking based on the electrical conductivity (EC). The EC of groundwater was increasing towards the coast. In general, the quality of groundwater for irrigation purpose vary from moderate to good based on Na%, magnesium hazard, residual sodium carbonate, sodium absorption ratio, permeability index, and USDA classification. Na-Cl and Ca-Mg-Cl were the dominant groundwater and surface water type. Increased ionic concentration of groundwater towards the eastern part of the study area is due to the discharge of industrial effluents and domestic sewage into the Adyar River. Seawater intrusion is also one of the reasons for Na-Cl dominant groundwater near the coast. Evaporation and ion exchange were the major processes controlling groundwater chemistry in this area. The groundwater quality of this region is affected by the contaminated surface water.

Geospatial distribution modeling and determining suitability of groundwater quality for irrigation purpose using geospatial methods and water quality index (WQI) in Northern Ethiopia

NASA Astrophysics Data System (ADS)

Gidey, Amanuel

2018-06-01

Determining suitability and vulnerability of groundwater quality for irrigation use is a key alarm and first aid for careful management of groundwater resources to diminish the impacts on irrigation. This study was conducted to determine the overall suitability of groundwater quality for irrigation use and to generate their spatial distribution maps in Elala catchment, Northern Ethiopia. Thirty-nine groundwater samples were collected to analyze and map the water quality variables. Atomic absorption spectrophotometer, ultraviolet spectrophotometer, titration and calculation methods were used for laboratory groundwater quality analysis. Arc GIS, geospatial analysis tools, semivariogram model types and interpolation methods were used to generate geospatial distribution maps. Twelve and eight water quality variables were used to produce weighted overlay and irrigation water quality index models, respectively. Root-mean-square error, mean square error, absolute square error, mean error, root-mean-square standardized error, measured values versus predicted values were used for cross-validation. The overall weighted overlay model result showed that 146 km2 areas are highly suitable, 135 km2 moderately suitable and 60 km2 area unsuitable for irrigation use. The result of irrigation water quality index confirms 10.26% with no restriction, 23.08% with low restriction, 20.51% with moderate restriction, 15.38% with high restriction and 30.76% with the severe restriction for irrigation use. GIS and irrigation water quality index are better methods for irrigation water resources management to achieve a full yield irrigation production to improve food security and to sustain it for a long period, to avoid the possibility of increasing environmental problems for the future generation.

76 FR 35832 - Folding Metal Tables and Chairs From the People's Republic of China: Preliminary Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... incurred negative profit. Meco, subsequently, argues that the Department should resort to using Indonesian... statements for the year ending March 31, 2009.\\13\\ We agree with Meco that a negative profit would preclude... control.\\21\\ \\19\\ See, e.g., Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed...

Fingerprint chromatogram analysis of extracts from the leaves of Tripterygium wilfordii Hook. F. by high performance liquid chromatography.

PubMed

Li, Ke; Wang, Shudong

2005-05-01

A simple and reliable high performance liquid chromatographic (HPLC) method has been developed and validated for the study of fingerprint chromatograms of extracts from the leaves of Tripterygium wilfordii Hook. F. (TWHF) and for controlling the quality of the herb. HPLC separation of the extracts was performed on a Lichrospher RP-18 column and detected by ultraviolet absorbance at 210 nm. The column temperature was maintained at 35 degrees C. A mobile phase composed of acetonitrile:H2O in the ratio of 39:61 (v/v) was found to be most suitable for this separation at a flow rate of 0.8 mL/min with isocratic elution. Under the chromatographic conditions described, the peak profile of the 10 components collected within 35 min made up the fingerprint of the extracts from leaves of TWHF with universal features. The fingerprint chromatograms had a good stability, precision, and reproducibility. The similarity of the extracts from leaves of TWHF collected in summer and winter was studied with triptolide as a reference peak. The method is suitable for differentiation of extracts from the leaves of TWHF, and can be used as a quality control method for this herb.

LED Context Lighting System in Residential Areas

PubMed Central

Im, Kyoung-Mi

2014-01-01

As issues of environment and energy draw keen interest around the globe due to such problems as global warming and the energy crisis, LED with high optical efficiency is brought to the fore as the next generation lighting. In addition, as the national income level gets higher and life expectancy is extended, interest in the enhancement of life quality is increasing. Accordingly, the trend of lightings is changing from mere adjustment of light intensity to system lighting in order to enhance the quality of one's life as well as reduce energy consumption. Thus, this study aims to design LED context lighting system that automatically recognizes the location and acts of a user in residential areas and creates an appropriate lighting environment. The proposed system designed in this study includes three types of processing: first, the creation of a lighting environment index suitable for the user's surroundings and lighting control scenarios and second, it measures and analyzes the optical characteristics that change depending on the dimming control of lighting and applies them to the index. Lastly, it adopts PIR, piezoelectric, and power sensor to grasp the location and acts of the user and create a lighting environment suitable for the current context. PMID:25101325

3DS-colorimeter based on a mobile phone camera for industrial applications

NASA Astrophysics Data System (ADS)

Miettinen, Jari; Martinkauppi, J. Birgitta; Suopajärvi, Pekka

2013-02-01

Colour gives an essential finishing touch to many products. Consumers find it as an important factor, for example, when selecting doors, furniture, parquet and coated metal products. Currently, colour evaluation is often carried out by looking at the product. Since people's memory for an exact colour is poor, this method often produces unsatisfactory results in industrial quality control. In this paper, we discuss how to solve this problem by the use of a colour measurement technology for mobile phones equipped with a suitable accessory. Mobile phones provide a suitable monitor platform even for laymen as people are increasingly using their mobile devices for purposes of entertainment, communication and business, thus making them a familiar device to use. Our 3DS-colorimeter is a new, handheld, low-cost consumer/industrial-level prototype combining both a colorimeter feature and 3D surface measurement feature. In this paper, we describe its colorimeter features shortly and demonstrate its performance in measurement repeatability and colorimetric accuracy. As an application example, we show its usefulness for monitoring the colour appearance of painted doors. This study indicates that the 3DS-colorimeter is applicable to industrial quality control.

A novel cell line generated using the CRISPR/Cas9 technology as universal quality control material for KRAS G12V mutation testing.

PubMed

Jia, Shiyu; Zhang, Rui; Lin, Guigao; Peng, Rongxue; Gao, Peng; Han, Yanxi; Fu, Yu; Ding, Jiansheng; Wu, Qisheng; Zhang, Kuo; Xie, Jiehong; Li, Jinming

2018-06-01

KRAS mutations are the key indicator for EGFR monoclonal antibody-targeted therapy and acquired drug resistance, and their accurate detection is critical to the clinical decision-making of colorectal cancer. However, no proper quality control material is available for the current detection methods, particularly next-generation sequencing (NGS). The ideal quality control material for NGS needs to provide both the tumor mutation gene and the matched background genomic DNA, which is uncataloged in public databases, to accurately distinguish germline polymorphisms and somatic mutations. We developed a novel KRAS G12V mutant cell line using the clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) technique to make up for the deficiencies in existing quality control material and further validated the feasibility of the cell line as quality control material by amplification refractory mutation system (ARMS), Sanger sequencing, digital PCR (dPCR), and NGS. We verified that the edited cell line specifically had the G12V mutation, and the validation results presented a high consistency among the four methods of detection. The three cell lines screened contained the G12V mutation and the mutation allele fractions of G12V-1, G12V-2, and G12V-3 were 52.01%, 82.06%, and 17.29%, respectively. The novel KRAS G12V cell line generated using the CRISPR/Cas9 gene editing system is suitable as a quality control material for all current detection methods and provides a new direction in the development of quality control material. © 2018 Wiley Periodicals, Inc.

Development and expansion of high-quality control region databases to improve forensic mtDNA evidence interpretation.

PubMed

Irwin, Jodi A; Saunier, Jessica L; Strouss, Katharine M; Sturk, Kimberly A; Diegoli, Toni M; Just, Rebecca S; Coble, Michael D; Parson, Walther; Parsons, Thomas J

2007-06-01

In an effort to increase the quantity, breadth and availability of mtDNA databases suitable for forensic comparisons, we have developed a high-throughput process to generate approximately 5000 control region sequences per year from regional US populations, global populations from which the current US population is derived and global populations currently under-represented in available forensic databases. The system utilizes robotic instrumentation for all laboratory steps from pre-extraction through sequence detection, and a rigorous eight-step, multi-laboratory data review process with entirely electronic data transfer. Over the past 3 years, nearly 10,000 control region sequences have been generated using this approach. These data are being made publicly available and should further address the need for consistent, high-quality mtDNA databases for forensic testing.

New approach to 'top-and-bottom' whole blood separation using the multiunit TACSI WB system: quality of blood components.

PubMed

Lotens, A; Najdovski, T; Cellier, N; Ernotte, B; Lambermont, M; Rapaille, A

2014-10-01

TACSI whole blood system is designed to combine primary and secondary processing of six whole blood bags into plasma units, buffy coat and red blood cell concentrates. The aim of this study was to investigate the specifications and in vitro storage parameters of blood components compared with standard centrifugation and separation processing. Whole blood bags, collected in CRC kits, were treated on a TACSI whole blood system. They were compared with whole blood bags collected in Composelect kits. In addition to routine quality control analyses, conservation studies were performed on red blood cell concentrates for 42 days and on plasma for 6 months. Platelets pools with five buffy coats were also created, and cellular contamination was evaluated. Red blood cell concentrates produced from TACSI whole blood met European quality requirements. For white blood cell count, one individual result exceeded 1 × 10(6) cells/unit. All plasma units fell within specifications for residual cellular contamination and storage parameters. The performances of the TACSI whole blood system allow for the preparation of low volume buffy coats with a recovery of 90% of whole blood platelets. Haemoglobin losses in TACSI BC are smaller, but this did not result in higher haemoglobin content of red cells. These BC are suitable for the production of platelet concentrates. From these in vitro data, red blood cell concentrates produced using TACSI whole blood are suitable for clinical use with a quality at least equivalent to the control group. © 2014 International Society of Blood Transfusion.

75 FR 81218 - Laminated Woven Sacks From the People's Republic of China: Preliminary Results of the Second...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... (``BOPP'') or to an exterior ply of paper that is suitable for high quality print graphics; \\4\\ printed... suitable for high quality print graphics,'' as used herein, means paper having an ISO brightness of 82 or... high quality print graphics. Effective July 1, 2007, laminated woven sacks are classifiable under...

75 FR 10774 - Certain Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses from the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-09

... Suitable For High-Quality Print Graphics Using Sheet-Fed Presses from the People's Republic of China...-quality print graphics using sheet-fed presses from the People's Republic of China (``PRC''). For... Graphics Using Sheet-Fed Presses from the People's Republic of China: Initiation of Countervailing Duty...

SASS Applied to Optimum Work Roll Profile Selection in the Hot Rolling of Wide Steel

NASA Astrophysics Data System (ADS)

Nolle, Lars

The quality of steel strip produced in a wide strip rolling mill depends heavily on the careful selection of initial ground work roll profiles for each of the mill stands in the finishing train. In the past, these profiles were determined by human experts, based on their knowledge and experience. In previous work, the profiles were successfully optimised using a self-organising migration algorithm (SOMA). In this research, SASS, a novel heuristic optimisation algorithm that has only one control parameter, has been used to find the optimum profiles for a simulated rolling mill. The resulting strip quality produced using the profiles found by SASS is compared with results from previous work and the quality produced using the original profile specifications. The best set of profiles found by SASS clearly outperformed the original set and performed equally well as SOMA without the need of finding a suitable set of control parameters.

A critical appraisal of the reporting quality of published randomized controlled trials in the fall injuries.

PubMed

Asghari Jafarabadi, Mohammad; Sadeghi-Bazrgani, Homayoun; Dianat, Iman

2018-06-01

To evaluate the quality of reporting in published randomized controlled trials (RTCs) in the field of fall injuries. The 188 RTCs published between 2001 and 2011, indexed in EMBASE and Medline databases were extracted through searching by appropriate keywords and EMTree classification terms. The evaluation trustworthiness was assured through parallel evaluations of two experts in epidemiology and biostatistics. About 40%-75% of papers had problems in reporting random allocation method, allocation concealment, random allocation implementation, blinding and similarity among groups, intention to treat and balancing benefits and harms. Moreover, at least 10% of papers inappropriately/not reported the design, protocol violations, sample size justification, subgroup/adjusted analyses, presenting flow diagram, drop outs, recruitment time, baseline data, suitable effect size on outcome, ancillary analyses, limitations and generalizability. Considering the shortcomings found and due to the importance of the RCTs for fall injury prevention programmes, their reporting quality should be improved.

GIS habitat analysis for lesser prairie-chickens in southeastern New Mexico.

PubMed

Johnson, Kristine; Neville, Teri B; Neville, Paul

2006-12-04

We conducted Geographic Information System (GIS) habitat analyses for lesser prairie-chicken (LPCH, Tympanuchus pallidicinctus) conservation planning. The 876,799 ha study area included most of the occupied habitat for the LPCH in New Mexico. The objectives were to identify and quantify: 1. suitable LPCH habitat in New Mexico, 2. conversion of native habitats, 3. potential for habitat restoration, and 4. unsuitable habitat available for oil and gas activities. We found 16% of suitable habitat (6% of the study area) distributed in 13 patches of at least 3,200 ha and 11% of suitable habitat (4% of the study area) distributed in four patches over 7,238 ha. The area converted from native vegetation types comprised 17% of the study area. Ninety-five percent of agricultural conversion occurred on private lands in the northeastern corner of the study area. Most known herbicide-related conversions (82%) occurred in rangelands in the western part of the study area, on lands managed primarily by the US Bureau of Land Management (BLM). We identified 88,190 ha (10% of the study area) of habitats with reasonable restoration potential. Sixty-two percent of the primary population area (PPA) contained occupied, suitable, or potentially suitable habitat, leaving 38% that could be considered for oil and gas development. Although suitable LPCH habitat appears at first glance to be abundant in southeastern New Mexico, only a fraction of apparently suitable vegetation types constitute quality habitat. However, we identified habitat patches that could be restored through mesquite control or shin-oak reintroduction. The analysis also identified areas of unsuitable habitat with low restoration potential that could be targeted for oil and gas exploration, in lieu of occupied, high-quality habitats. Used in combination with GIS analysis and current LPCH population data, the habitat map represents a powerful conservation and management tool.

GIS habitat analysis for lesser prairie-chickens in southeastern New Mexico

PubMed Central

Johnson, Kristine; Neville, Teri B; Neville, Paul

2006-01-01

Background We conducted Geographic Information System (GIS) habitat analyses for lesser prairie-chicken (LPCH, Tympanuchus pallidicinctus) conservation planning. The 876,799 ha study area included most of the occupied habitat for the LPCH in New Mexico. The objectives were to identify and quantify: 1. suitable LPCH habitat in New Mexico, 2. conversion of native habitats, 3. potential for habitat restoration, and 4. unsuitable habitat available for oil and gas activities. Results We found 16% of suitable habitat (6% of the study area) distributed in 13 patches of at least 3,200 ha and 11% of suitable habitat (4% of the study area) distributed in four patches over 7,238 ha. The area converted from native vegetation types comprised 17% of the study area. Ninety-five percent of agricultural conversion occurred on private lands in the northeastern corner of the study area. Most known herbicide-related conversions (82%) occurred in rangelands in the western part of the study area, on lands managed primarily by the US Bureau of Land Management (BLM). We identified 88,190 ha (10% of the study area) of habitats with reasonable restoration potential. Sixty-two percent of the primary population area (PPA) contained occupied, suitable, or potentially suitable habitat, leaving 38% that could be considered for oil and gas development. Conclusion Although suitable LPCH habitat appears at first glance to be abundant in southeastern New Mexico, only a fraction of apparently suitable vegetation types constitute quality habitat. However, we identified habitat patches that could be restored through mesquite control or shin-oak reintroduction. The analysis also identified areas of unsuitable habitat with low restoration potential that could be targeted for oil and gas exploration, in lieu of occupied, high-quality habitats. Used in combination with GIS analysis and current LPCH population data, the habitat map represents a powerful conservation and management tool. PMID:17144922

[TEIS--a system for public health offices for assessing, presenting, evaluating and communicating data on the quality of drinking water].

PubMed

Henke, A; Overath, H; Heinzke, J

1999-05-01

Monitoring the quality of drinking water is a cardinal task of German Public Health Offices and of the relevant Ministries of Health of the German Federal states ("Länder"). Today this can be tackled on a large scale and economically only with computer assistance. A system has been developed in North Rhine Westphalia on behalf of the Ministry of Health, for data assessment and communication which is suitable for practical work and user friendly. It aims at supporting the Public Health Offices in their daily work and at improving and simplifying the monitoring of drinking water supply systems and of drinking water quality control.

Online Health Information Regarding Male Infertility: An Evaluation of Readability, Suitability, and Quality.

PubMed

Robins, Stephanie; Barr, Helena J; Idelson, Rachel; Lambert, Sylvie; Zelkowitz, Phyllis

2016-10-21

Many men lack knowledge about male infertility, and this may have consequences for their reproductive and general health. Men may prefer to seek health information online, but these sources of information vary in quality. The objective of this study is to determine if online sources of information regarding male infertility are readable, suitable, and of appropriate quality for Internet users in the general population. This study used a cross-sectional design to evaluate online sources resulting from search engine queries. The following categories of websites were considered: (1) Canadian fertility clinics, (2) North American organizations related to fertility, and (3) the first 20 results of Google searches using the terms "male infertility" and "male fertility preservation" set to the search locations worldwide, English Canada, and French Canada. Websites that met inclusion criteria (N=85) were assessed using readability indices, the Suitability Assessment of Materials (SAM), and the DISCERN tool. The associations between website affiliation (government, university/medical, non-profit organization, commercial/corporate, private practice) and Google placement to readability, suitability, and quality were also examined. None of the sampled websites met recommended levels of readability. Across all websites, the mean SAM score for suitability was 45.37% (SD 11.21), or "adequate", while the DISCERN mean score for quality was 43.19 (SD 10.46) or "fair". Websites that placed higher in Google obtained a higher overall score for quality with an r (58) value of -.328 and a P value of .012, but this position was not related to readability or suitability. In addition, 20% of fertility clinic websites did not include fertility information for men. There is a lack of high quality online sources of information on male fertility. Many websites target their information to women, or fail to meet established readability criteria for the general population. Since men may prefer to seek health information online, it is important that health care professionals develop high quality sources of information on male fertility for the general population.

Recycle of Inorganic Nutrients for Hydroponic Crop Production Following Incineration of Inedible Biomass

NASA Technical Reports Server (NTRS)

Bubenheim, David L.; Wignarajah, Kanapathipillai; Kliss, Mark H. (Technical Monitor)

1996-01-01

Recovery of resources from waste streams is essential for future implementation and reliance on a regenerative life support system. The major waste streams of concern are from human activities and plant wastes. Carbon, water and inorganics are the primary desired raw materials of interest. The goal of resource recovery is maintenance of product quality to insure support of reliable and predictable levels of life support function performance by the crop plant component. Further, these systems must be maintained over extended periods of time, requiring maintenance of nutrient solutions to avoid toxicity and deficiencies. Today, reagent grade nutrients are used to make nutrient solutions for hydroponic culture and these solutions are frequently changed during the life cycle or sometimes managed for only one crop life cycle. The focus of this study was to determine the suitability of the ash product following incineration of inedible biomass as a source of inorganic nutrients for hydroponic crop production. Inedible wheat biomass was incinerated and ash quality characterized. The incinerator ash was dissolved in adequate nitric acid to establish a consistent nitrogen concentration in all nutrient solution treatments. Four experimental nutrient treatments were included: control, ash only, ash supplemented to match control, and ash only quality formulated with reagent grade chemicals. When nutrient solutions are formulated using only ash following-incineration of inedible biomass, a balance in solution is established representing elemental retention following incineration and nutrient proportions present in the original biomass. The resulting solution is not identical to the control. This imbalance resulted in suppression of crop growth. When the ash is supplemented with nutrients to establish the same balance as in the control, growth is identical to the control. The ash appears to carry no phytotoxic materials. Growth in solution formulated with reagent grade chemicals but matching the quality of the ash only treatment resulted in growth similar to that of the ash only treatment. The ash product resulting from incineration of inedible biomass appears to be a suitable form for recycle of inorganic nutrients to crop production.

Quality assessment of groundwater from the south-eastern Arabian Peninsula.

PubMed

Zhang, H W; Sun, Y Q; Li, Y; Zhou, X D; Tang, X Z; Yi, P; Murad, A; Hussein, S; Alshamsi, D; Aldahan, A; Yu, Z B; Chen, X G; Mugwaneza, V D P

2017-08-01

Assessment of groundwater quality plays a significant role in the utilization of the scarce water resources globally and especially in arid regions. The increasing abstraction together with man-made contamination and seawater intrusion have strongly affected groundwater quality in the Arabia Peninsula, exemplified by the investigation given here from the United Arab Emirates, where the groundwater is seldom reviewed and assessed. In the aim of assessing current groundwater quality, we here present a comparison of chemical data linked to aquifers types. The results reveal that most of the investigated groundwater is not suitable for drinking, household, and agricultural purposes following the WHO permissible limits. Aquifer composition and climate have vital control on the water quality, with the carbonate aquifers contain the least potable water compared to the ophiolites and Quaternary clastics. Seawater intrusion along coastal regions has deteriorated the water quality and the phenomenon may become more intensive with future warming climate and rising sea level.

Rapid analysis of inner and outer bark composition of southern yellow pine bark from industrial sources

Treesearch

Chi-Leung So; Thomas L. Eberhardt

2006-01-01

Differences in bark chemistry between inner and outer bark are well known and may affect the suitability of various bark supplies for a particular application. Accordingly, there is a need for quality control protocols to assess variability and predict product yields. Southern yellow pine bark samples from two industrial sources were separated into inner and outer bark...

Methodological Quality of Randomized Clinical Trials of Respiratory Physiotherapy in Coronary Artery Bypass Grafting Patients in the Intensive Care Unit: a Systematic Review

PubMed Central

Lorscheitter, Jaqueline; Stein, Cinara; Plentz, Rodrigo Della Méa

2017-01-01

Objective To assess methodological quality of the randomized controlled trials of physiotherapy in patients undergoing coronary artery bypass grafting in the intensive care unit. Methods The studies published until May 2015, in MEDLINE, Cochrane and PEDro were included. The primary outcome extracted was proper filling of the Cochrane Collaboration's tool's items and the secondary was suitability to the requirements of the CONSORT Statement and its extension. Results From 807 studies identified, 39 were included. Most at CONSORT items showed a better adequacy after the statement's publication. Studies with positive outcomes presented better methodological quality. Conclusion The methodological quality of the studies has been improving over the years. However, many aspects can still be better designed. PMID:28977205

Assessment of Groundwater quality in Krishnagiri and Vellore Districts in Tamil Nadu, India

NASA Astrophysics Data System (ADS)

Shanmugasundharam, A.; Kalpana, G.; Mahapatra, S. R.; Sudharson, E. R.; Jayaprakash, M.

2017-07-01

Groundwater quality is important as it is the main factor determining its suitability for drinking, domestic, agricultural and industrial purposes. The suitability of groundwater for drinking and irrigation has been assessed in north and eastern part of Krishnagiri district, South-western part of Vellore district and contiguous with Andhra Pradesh states, India. A total of 31 groundwater samples were collected in the study area. The groundwater quality assessment has been carried out by evaluating the physicochemical parameters such as pH, EC, TDS, {HCO}3^{ - }, Cl-, {SO}4^{2 - }, Ca2+, Mg2+, Na+ and K+. The dominant cations are in the order of Na+ > K+ > Ca2+ > Mg2+ while the dominant anions have the trends of Cl- > {HCO}3^{ - } > {SO}4^{2 - } > CO3. The quality of the water is evaluated using Wilcox diagram and the results reveals that most of the samples are found to be suitable for irrigation. Based on these parameters, groundwater has been assessed in favor of its suitability for drinking and irrigation purpose.

Assessing the suitability of stream water for five different uses and its aquatic environment.

PubMed

Fulazzaky, Mohamad Ali

2013-01-01

Surface water is one of the essential resources for supporting sustainable development. The suitability of such water for a given use depends both on the available quantity and tolerable quality. Temporary status for a surface water quality has been identified extensively. Still the suitability of the water for different purposes needs to be verified. This study proposes a water quality evaluation system to assess the aptitude of the Selangor River water for aquatic biota, drinking water production, leisure and aquatic sport, irrigation use, livestock watering, and aquaculture use. Aptitude of the water has been classified in many parts of the river segment as unsuitable for aquatic biota, drinking water production, leisure and aquatic sport as well as aquaculture use. The water quality aptitude classes of the stream water for nine locations along the river are evaluated to contribute to decision support system. The suitability of the water for five different uses and its aquatic ecosystem are verified.

Evaluation of water quality and hydrogeochemistry of surface and groundwater, Tiruvallur District, Tamil Nadu, India

NASA Astrophysics Data System (ADS)

Krishna Kumar, S.; Hari Babu, S.; Eswar Rao, P.; Selvakumar, S.; Thivya, C.; Muralidharan, S.; Jeyabal, G.

2017-09-01

Water quality of Tiruvallur Taluk of Tiruvallur district, Tamil Nadu, India has been analysed to assess its suitability in relation to domestic and agricultural uses. Thirty water samples, including 8 surface water (S), 22 groundwater samples [15 shallow ground waters (SW) and 7 deep ground waters (DW)], were collected to assess the various physico-chemical parameters such as Temperature, pH, Electrical conductivity (EC), Total dissolved solids (TDS), cations (Ca, Mg, Na, K), anions (CO3, HCO3, Cl, SO4, NO3, PO4) and trace elements (Fe, Mn, Zn). Various irrigation water quality diagrams and parameters such as United states salinity laboratory (USSL), Wilcox, sodium absorption ratio (SAR), sodium percentage (Na %), Residual sodium carbonate (RSC), Residual Sodium Bicarbonate (RSBC) and Kelley's ratio revealed that most of the water samples are suitable for irrigation. Langelier Saturation Index (LSI) values suggest that the water is slightly corrosive and non-scale forming in nature. Gibbs plot suggests that the study area is dominated by evaporation and rock-water dominance process. Piper plot indicates the chemical composition of water, chiefly controlled by dissolution and mixing of irrigation return flow.

The usefulness of Quality of Life Childhood Epilepsy (QOLCE) questionnaire in evaluating the quality of life of children with epilepsy.

PubMed

Talarska, D

2007-01-01

Evaluation of quality of life has become a frequently used method in treatment effects supervision. Quality of Life Childhood Epilepsy (QOLCE) questionnaire, which is completed by patients' parents, has been prepared for children with epilepsy. It enables to determine the quality of life in children aged 4-18 years. The aim of the study was to show the usefulness of QOLCE questionnaire in evaluating the quality of life of children with epilepsy. 160 epileptic children, aged 8-18 years and their parents were examined in the Chair and Department of Developmental Neurology, K. Marcinkowski University of Medical Sciences in Poznań. QOLCE questionnaire was completed by parents and "Young people and epilepsy" questionnaire was designed for children. Reliability index of the complete questionnaire in own research and in the original amounted to 0.93 Cronbach alpha coefficient. Epileptic, drug-resistant children constituted 28% of the examined group. Parents of children with controlled seizures evaluated children's functioning in analyzed areas of quality of life higher. 1. QOLCE questionnaire is a suitable tool to evaluate the quality of children's and adolescents' life. 2. The most significant differences in functioning of epileptic, drug-resistant patients and those with controlled seizures were observed in areas of cognitive processes and social activity.

The Czech External Quality Control system in medical microbiology and parasitology.

PubMed

Slosárek, M; Kríz, B

2000-11-01

The External Quality Control (EQC) system in activities of laboratories engaged in medical microbiology and parasitology was established in the Czech Republic in 1993 when to the first laboratories which applied coded serum samples were sent for diagnosis of viral hepatitis and bacterial strains for identification. In the course of years the number of control areas increased and in 2000 there were 31 and the number of those interested in participation in EQC increased from 79 in 1993 to 434 in 2000. This year a total of 13,239 samples will be sent to laboratories. Gradually thus almost all microbiological and parasitological laboratories concerned with examination of clinical material became involved. Seven-year experience with EQC in the Czech Republic revealed that gradually the results of various examinations became more accurate, that methods became standardized and the most suitable examination sets are used.

Liver phantom for quality control and training in nuclear medicine

NASA Astrophysics Data System (ADS)

Lima Ferreira, Fernanda Carla; Souza, Divanizia do Nascimento

2011-10-01

In nuclear medicine, liver scintigraphy aims to verify organ function based on the radionuclide concentration in the liver and bile flow and is also used to detect tumors. Therefore it is necessary to perform quality control tests in the gamma camera before running the exam to prevent false results. Quality control tests of the gamma camera should thus be performed before running the exam to prevent false results. Such tests generally use radioactive material inside phantoms for evaluation of gamma camera parameters in quality control procedures. Phantoms can also be useful for training doctors and technicians in nuclear medicine procedures. The phantom proposed here has artifacts that simulate nodules; it may take on different quantities, locations and sizes and it may also be mounted without the introduction of nodules. Thus, its images may show hot or cold nodules or no nodules. The phantom consists of acrylic plates hollowed out in the centre, with the geometry of an adult liver. Images for analyses of simulated liver scintigraphy were obtained with the detector device at 5 cm from the anterior surface of the phantom. These simulations showed that this object is suitable for quality control in nuclear medicine because it was possible to visualize artifacts larger than 7.9 mm using a 256×256 matrix and 1000 kcpm. The phantom constructed in this work will also be useful for training practitioners and technicians in order to prevent patients from repeat testing caused by error during examinations.

Collaborative study on saccharide quantification of the Haemophilus influenzae type b component in liquid vaccine presentations.

PubMed

Rosskopf, U; Daas, A; Terao, E; von Hunolstein, C

2017-01-01

Before release onto the market, it must be demonstrated that the total and free polysaccharide (poly ribosyl-ribitol-phosphate, PRP) content of Haemophilus influenzae type b (Hib) vaccine complies with requirements. However, manufacturers use different methods to assay PRP content: a national control laboratory must establish and validate the relevant manufacturer methodology before using it to determine PRP content. An international study was organised by the World Health Organization (WHO), in collaboration with the Biological Standardisation Programme (BSP) of the Council of Europe/European Directorate for the Quality of Medicines & HealthCare (EDQM) and of the European Union Commission, to verify the suitability of a single method for determining PRP content in liquid pentavalent vaccines (DTwP-HepB-Hib) containing a whole-cell pertussis component. It consists of HCl hydrolysis followed by chromatographic separation and quantification of ribitol on a CarboPac MA1 column using high-performance anion exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD). The unconjugated, free, PRP is separated from the total PRP using C4 solid-phase extraction cartridges (SPE C4). Ten quality control laboratories performed two independent analyses applying the proposed analytical test protocol to five vaccine samples, including a vaccine lot with sub-potent PRP content and very high free PRP content. Both WHO PRP standard and ribitol reference standard were included as calibrating standards. A significant bias between WHO PRP standard and ribitol reference standard was observed. Study results showed that the proposed analytical method is, in principle, suitable for the intended use provided that a validation is performed as usually expected from quality control laboratories.

Synthesis of the unmanned aerial vehicle remote control augmentation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomczyk, Andrzej, E-mail: A.Tomczyk@prz.edu.pl

Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are notmore » suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the 'ideal' remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system.« less

Systematic Assessment of the Hemolysis Index: Pros and Cons.

PubMed

Lippi, Giuseppe

2015-01-01

Preanalytical quality is as important as the analytical and postanalytical quality in laboratory diagnostics. After decades of visual inspection to establish whether or not a diagnostic sample may be suitable for testing, automated assessment of hemolysis index (HI) has now become available in a large number of laboratory analyzers. Although most national and international guidelines support systematic assessment of sample quality via HI, there is widespread perception that this indication has not been thoughtfully acknowledged. Potential explanations include concern of increased specimen rejection rate, poor harmonization of analytical techniques, lack of standardized units of measure, differences in instrument-specific cutoff, negative impact on throughput, organization and laboratory economics, and lack of a reliable quality control system. Many of these concerns have been addressed. Evidence now supports automated HI in improving quality and patient safety. These will be discussed. © 2015 Elsevier Inc. All rights reserved.

Alternative indicators for monitoring the quality of a continuous intervention program on antibiotic prescribing during changing healthcare conditions.

PubMed

Bantar, C; Franco, D; Heft, C; Vesco, E; Arango, C; Izaguirre, M; Alcázar, G; Boleas, M; Oliva, M E

2005-06-01

We recently published on the impact of a four-phase hospital-wide intervention program designed to optimize the quality of antibiotic use, where a multidisciplinary team (MDT) could modify prescription at the last phase. Because health care quality was changing during the last 5 years (late 1999 to early 2004), we developed certain indicators to monitor the quality of our intervention over time. Different periods were defined as baseline (pre-intervention), initial intervention-active control, pre-crisis control, crisis control, post-crisis control and end of crisis control. Major indicators were rates of prescription modification by the MDT; prescription for an uncertain infection and a novel index formula (RIcarb) to estimate the rationale for carbapenem use. We assessed 2115 antimicrobial prescriptions. Modification of prescription rate was 30% at the beginning and decreased thereafter up to stable levels. Rate of prescriptions ordered for cases of both uncertain infection and unknown source of infection decreased significantly after intervention (i.e. from baseline to active control). In contrast, a doubling of culture-directed prescriptions was observed between these periods. RIcarb values lower and higher than 60% (modal, cut-off) were assumed as carbapenem overuse and underuse, respectively. Overuse was observed at the pre-intervention, while pronounced underuse was shown during the crisis (RIcarb, 45% and 87%, respectively). The present study demonstrates that certain indicators, other than the widely adopted impact outcomes, are a suitable tool for monitoring the quality of a continuous, long-term, active intervention on antimicrobial prescribing practice, especially when applied in a changing healthcare setting.

[Study on balance group in steady-state extraction process of Chinese medicine and experimental verification to Houttuynia cordata].

PubMed

Liu, Wenlong; Zhang, Xili; He, Fuyuan; Zhang, Ping; Wang, Haiqin; Wu, Dezhi; Chen, Zuohong

2011-11-01

To establish and experimental verification the mathematical model of the balance groups that is the steady-state of traditional Chinese medicine in extraction. Using the entropy and genetic principles of statistics, and taking the coefficient of variation of GC fingerprint which is the naphtha of the Houttuynia cordata between strains in the same GAP place as a pivot to establish and verify the mathematical model was established of the balance groups that is the steady-state of traditional Chinese medicine in extraction. A mathematical model that is suitable for the balance groups of the steady-state of traditional Chinese medicine and preparation in extraction, and the balance groups which is 29 683 strains (approximately 118.7 kg) were gained with the same origin of H. cordata as the model drug. Under the GAP of quality control model, controlling the stability of the quality through further using the Hardy-Weinberg balance groups of the H. cordata between strains, the new theory and experiment foundation is established for the steady-state of traditional Chinese medicine in extraction and quality control.

Groundwater quality assessment using geospatial and statistical tools in Salem District, Tamil Nadu, India

NASA Astrophysics Data System (ADS)

Arulbalaji, P.; Gurugnanam, B.

2017-10-01

The water quality study of Salem district, Tamil Nadu has been carried out to assess the water quality for domestic and irrigation purposes. For this purpose, 59 groundwater samples were collected and analyzed for pH, electrical conductivity (EC), total dissolved solids (TDS), major anions (HCO3 -, CO3 -, F-, Cl-, NO2 - + NO3 -, and SO4 2-), major cations (Ca2+ Mg2+, Na+, and K+), alkalinity (ALK), and hardness (HAR). To assess the water quality, the following chemical parameters were calculated based on the analytical results, such as Piper plot, water quality index (WQI), sodium adsorption ratio (SAR), magnesium hazard (MH), Kelly index (KI), and residual sodium carbonate (RSC). Wilcox diagram represents that 23% of the samples are excellent to good, 40% of the samples are good to permissible, 10% of the samples are permissible to doubtful, 24% of the samples are doubtful unsuitable, and only 3% of the samples are unsuitable for irrigation. SAR values shows that 52% of the samples indicate high-to-very high and low-to-medium alkali water. KI values indicate good quality (30%) and not suitable (70%) for irrigation purposes. RSC values indicate that 89% of samples are suitable for irrigation purposes. MH reveals that 17% suitable and 83% samples are not suitable for irrigation purposes and for domestic purposes the excellent (8%), good (48%), and poor (44%). The agricultural waste, fertilizer used, soil leaching, urban runoff, livestock waste, and sewages are the sources of poor water quality. Some samples are not suitable for irrigation purposes due to high salinity, hardness, and magnesium concentration. In general, the groundwater of the Salem district was polluted by agricultural activities, anthropogenic activities, ion exchange, and weathering.

Vision-based real-time position control of a semi-automated system for robot-assisted joint fracture surgery.

PubMed

Dagnino, Giulio; Georgilas, Ioannis; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

2016-03-01

Joint fracture surgery quality can be improved by robotic system with high-accuracy and high-repeatability fracture fragment manipulation. A new real-time vision-based system for fragment manipulation during robot-assisted fracture surgery was developed and tested. The control strategy was accomplished by merging fast open-loop control with vision-based control. This two-phase process is designed to eliminate the open-loop positioning errors by closing the control loop using visual feedback provided by an optical tracking system. Evaluation of the control system accuracy was performed using robot positioning trials, and fracture reduction accuracy was tested in trials on ex vivo porcine model. The system resulted in high fracture reduction reliability with a reduction accuracy of 0.09 mm (translations) and of [Formula: see text] (rotations), maximum observed errors in the order of 0.12 mm (translations) and of [Formula: see text] (rotations), and a reduction repeatability of 0.02 mm and [Formula: see text]. The proposed vision-based system was shown to be effective and suitable for real joint fracture surgical procedures, contributing a potential improvement of their quality.

Online Health Information Regarding Male Infertility: An Evaluation of Readability, Suitability, and Quality

PubMed Central

Robins, Stephanie; Barr, Helena J; Idelson, Rachel; Lambert, Sylvie

2016-01-01

Background Many men lack knowledge about male infertility, and this may have consequences for their reproductive and general health. Men may prefer to seek health information online, but these sources of information vary in quality. Objective The objective of this study is to determine if online sources of information regarding male infertility are readable, suitable, and of appropriate quality for Internet users in the general population. Methods This study used a cross-sectional design to evaluate online sources resulting from search engine queries. The following categories of websites were considered: (1) Canadian fertility clinics, (2) North American organizations related to fertility, and (3) the first 20 results of Google searches using the terms “male infertility” and “male fertility preservation” set to the search locations worldwide, English Canada, and French Canada. Websites that met inclusion criteria (N=85) were assessed using readability indices, the Suitability Assessment of Materials (SAM), and the DISCERN tool. The associations between website affiliation (government, university/medical, non-profit organization, commercial/corporate, private practice) and Google placement to readability, suitability, and quality were also examined. Results None of the sampled websites met recommended levels of readability. Across all websites, the mean SAM score for suitability was 45.37% (SD 11.21), or “adequate”, while the DISCERN mean score for quality was 43.19 (SD 10.46) or “fair”. Websites that placed higher in Google obtained a higher overall score for quality with an r (58) value of -.328 and a P value of .012, but this position was not related to readability or suitability. In addition, 20% of fertility clinic websites did not include fertility information for men. Conclusions There is a lack of high quality online sources of information on male fertility. Many websites target their information to women, or fail to meet established readability criteria for the general population. Since men may prefer to seek health information online, it is important that health care professionals develop high quality sources of information on male fertility for the general population. PMID:27769954

Chemistry, manufacturing and controls in passive transdermal drug delivery systems.

PubMed

Goswami, Tarun; Audett, Jay

2015-01-01

Transdermal drug delivery systems (TDDS) are used for the delivery of the drugs through the skin into the systemic circulation by applying them to the intact skin. The development of TDDS is a complex and multidisciplinary affair which involves identification of suitable drug, excipients and various other components. There have been numerous problems reported with respect to TDDS quality and performance. These problems can be reduced by appropriately addressing chemistry, manufacturing and controls requirements, which would thereby result in development of robust TDDS product and processes. This article provides recommendations on the chemistry, manufacturing and controls focusing on the unique technical aspects of TDDS.

Quality measures in applications of image restoration.

PubMed

Kriete, A; Naim, M; Schafer, L

2001-01-01

We describe a new method for the estimation of image quality in image restoration applications. We demonstrate this technique on a simulated data set of fluorescent beads, in comparison with restoration by three different deconvolution methods. Both the number of iterations and a regularisation factor are varied to enforce changes in the resulting image quality. First, the data sets are directly compared by an accuracy measure. These values serve to validate the image quality descriptor, which is developed on the basis of optical information theory. This most general measure takes into account the spectral energies and the noise, weighted in a logarithmic fashion. It is demonstrated that this method is particularly helpful as a user-oriented method to control the output of iterative image restorations and to eliminate the guesswork in choosing a suitable number of iterations.

Use of Psychrotolerant Lactic Acid Bacteria (Lactobacillus spp. and Leuconostoc spp.) Isolated from Chinese Traditional Paocai for the Quality Improvement of Paocai Products.

PubMed

Liu, Aiping; Li, Xiaoyan; Pu, Biao; Ao, Xiaolin; Zhou, Kang; He, Li; Chen, Shujuan; Liu, Shuliang

2017-03-29

To improve the quality of Chinese traditional Paocai, two psychrotolerant lactic acid bacteria (LAB) strains were isolated from Paocai, and the quality of Chinese Paocai product using these two strains as starter cultures was compared to a control sample fermented with aged brine at 10 °C. The results suggested that the physicochemical and sensory features of Paocai fermented with psychrotolerant LAB were more suitable for industrial applications. The nitrite content of Paocai fermented with psychrotolerant LAB was 1 mg/kg, which was significantly lower than that of the control Paocai (P < 0.05). Low-temperature fermentation with the starter cultures of psychrotolerant LAB could effectively prevent overacidity and over-ripening of the Paocai products. Additionally, Paocai fermented with psychrotolerant LAB harbored relatively simple microbial flora as revealed by polymerase chain reaction-denaturing gradient gel electrophoresis. This study provides a basis for improving the quality of Chinese traditional Paocai and the large-scale production of low-temperature Chinese traditional Paocai products.

Low-Temperature Solution Processable Electrodes for Piezoelectric Sensors Applications

NASA Astrophysics Data System (ADS)

Tuukkanen, Sampo; Julin, Tuomas; Rantanen, Ville; Zakrzewski, Mari; Moilanen, Pasi; Lupo, Donald

2013-05-01

Piezoelectric thin-film sensors are suitable for a wide range of applications from physiological measurements to industrial monitoring systems. The use of flexible materials in combination with high-throughput printing technologies enables cost-effective manufacturing of custom-designed, highly integratable piezoelectric sensors. This type of sensor can, for instance, improve industrial process control or enable the embedding of ubiquitous sensors in our living environment to improve quality of life. Here, we discuss the benefits, challenges and potential applications of piezoelectric thin-film sensors. The piezoelectric sensor elements are fabricated by printing electrodes on both sides of unmetallized poly(vinylidene fluoride) film. We show that materials which are solution processable in low temperatures, biocompatible and environmental friendly are suitable for use as electrode materials in piezoelectric sensors.

Groundwater quality and its suitability for drinking and irrigational use in the Southern Tiruchirappalli district, Tamil Nadu, India

NASA Astrophysics Data System (ADS)

Selvakumar, S.; Ramkumar, K.; Chandrasekar, N.; Magesh, N. S.; Kaliraj, S.

2017-03-01

A total of 20 groundwater samples were collected from both dug and bore wells of southern Tiruchirappalli district and analyzed for various hydrogeochemical parameters. The analyzed physicochemical parameters such as pH, electrical conductivity, total dissolved solids, calcium, magnesium, sodium, potassium, bicarbonate, carbonate, sulfate, chloride, nitrate, and fluoride are used to characterize the groundwater quality and its suitability for drinking and irrigational uses. The results of the chemical analysis indicates that the groundwater in the study area is slightly alkaline and mainly contains Na+, Ca2+, and Mg2+ cations as well as HCO3 2-, Cl-, SO4 2-and NO3 - anions. The total dissolved solids mainly depend on the concentration of major ions such as Ca, Mg, Na, K, HCO3, Cl, and SO4. Based on TDS, 55 % of the samples are suitable for drinking and rest of the samples are unsuitable for drinking. The total hardness indicates that majority of the groundwater samples are found within the permissible limit of WHO. The dominant hydrochemical facies for groundwater are Ca-Mg-Cl, Ca-HCO3, and Ca-Cl type. The USSL graphical geochemical representation of groundwater quality suggests that majority of the water samples belongs to high medium salinity with low alkali hazards. The Gibb's plot indicates that the groundwater chemistry of the study area is mainly controlled by evaporation and rock-water interaction. Spearman's correlation and factor analysis were used to distinguish the statistical relation between different ions and contamination source in the study area.

Statistical process control: separating signal from noise in emergency department operations.

PubMed

Pimentel, Laura; Barrueto, Fermin

2015-05-01

Statistical process control (SPC) is a visually appealing and statistically rigorous methodology very suitable to the analysis of emergency department (ED) operations. We demonstrate that the control chart is the primary tool of SPC; it is constructed by plotting data measuring the key quality indicators of operational processes in rationally ordered subgroups such as units of time. Control limits are calculated using formulas reflecting the variation in the data points from one another and from the mean. SPC allows managers to determine whether operational processes are controlled and predictable. We review why the moving range chart is most appropriate for use in the complex ED milieu, how to apply SPC to ED operations, and how to determine when performance improvement is needed. SPC is an excellent tool for operational analysis and quality improvement for these reasons: 1) control charts make large data sets intuitively coherent by integrating statistical and visual descriptions; 2) SPC provides analysis of process stability and capability rather than simple comparison with a benchmark; 3) SPC allows distinction between special cause variation (signal), indicating an unstable process requiring action, and common cause variation (noise), reflecting a stable process; and 4) SPC keeps the focus of quality improvement on process rather than individual performance. Because data have no meaning apart from their context, and every process generates information that can be used to improve it, we contend that SPC should be seriously considered for driving quality improvement in emergency medicine. Copyright © 2015 Elsevier Inc. All rights reserved.

Identification of suitable fundus images using automated quality assessment methods.

PubMed

Şevik, Uğur; Köse, Cemal; Berber, Tolga; Erdöl, Hidayet

2014-04-01

Retinal image quality assessment (IQA) is a crucial process for automated retinal image analysis systems to obtain an accurate and successful diagnosis of retinal diseases. Consequently, the first step in a good retinal image analysis system is measuring the quality of the input image. We present an approach for finding medically suitable retinal images for retinal diagnosis. We used a three-class grading system that consists of good, bad, and outlier classes. We created a retinal image quality dataset with a total of 216 consecutive images called the Diabetic Retinopathy Image Database. We identified the suitable images within the good images for automatic retinal image analysis systems using a novel method. Subsequently, we evaluated our retinal image suitability approach using the Digital Retinal Images for Vessel Extraction and Standard Diabetic Retinopathy Database Calibration level 1 public datasets. The results were measured through the F1 metric, which is a harmonic mean of precision and recall metrics. The highest F1 scores of the IQA tests were 99.60%, 96.50%, and 85.00% for good, bad, and outlier classes, respectively. Additionally, the accuracy of our suitable image detection approach was 98.08%. Our approach can be integrated into any automatic retinal analysis system with sufficient performance scores.

Magnetic control systems for large spacecraft with applications to space telescope

NASA Technical Reports Server (NTRS)

Dougherty, H.; Machnick, J.; Nakashima, A.; Henry, J.; Tompetrini, K.

1981-01-01

Magnetic control systems for large space vehicles offer the advantage of a simple, reliable, low cost augmentation to the primary control system. When used for momentum management, a magnetic torque source offers a long life and noncontaminant environment when compared to a mass expulsion torque source. These qualities make such systems suitable for employment with the Space Telescope, which is a long life, high performance vehicle with optics and scientific instruments which would be degraded by contamination due to mass expulsion products. The various applications of magnetic systems on the Space Telescope are considered. The future trend in magnetic control of large space vehicles lies in providing a known three axis reference for backup operations, such as recovery of the primary control mode.

Lipid and lipoprotein testing in resource-limited laboratories.

PubMed

Myers, Gary L

2003-01-01

The role of total cholesterol (TC) and lipoproteins in the assessment of coronary heart disease (CHD) is firmly established from population and intervention studies. Total and low-density lipoprotein cholesterol (LDLC) levels are positively associated with CHD, and high-density lipoprotein cholesterol (HDLC) levels are negatively associated with CHD. Efforts to identify and treat people at increased risk based on cholesterol and lipoprotein levels have led to more lipid testing and the need for very reliable test results. Thus, quality laboratory services are an essential component of healthcare delivery and play a vital role in any strategy to reduce morbidity and mortality from CHD. In laboratories with limited resources, establishing laboratory capability to measure CHD risk markers may be a considerable challenge. Laboratories face problems in selecting proper techniques, difficulties in equipment availability and maintenance, and shortage of supplies, staffing, and supervision. The Centers for Disease Control and Prevention (CDC) has been providing technical assistance for more than 30 years to laboratories that measure lipids and lipoproteins and is willing to provide technical assistance as needed for other laboratories to develop this capability. CDC can provide technical assistance to establish lipid and lipoprotein testing capability to support a CHD public health program in areas with limited laboratory resources. This assistance includes: selecting a suitable testing instrument; providing training for laboratory technicians; establishing a simple quality control plan; and instructing staff on how to prepare frozen serum control materials suitable for assessing accuracy of lipid and lipoprotein testing.

75 FR 61772 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From China...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-470-471 and 731-TA-1169-1170 (Final)] Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From China and Indonesia AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject...

75 FR 54650 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From China...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-08

... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-470-471 and 731-TA-1169-1170 (Final)] Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From China and Indonesia AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject...

75 FR 7447 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From Indonesia and the People's...: February 19, 2010. FOR FURTHER INFORMATION CONTACT: Gemal Brangman (Indonesia) or Demitrios Kalogeropoulos... using sheet-fed presses from Indonesia and the People's Republic of China. See Certain Coated Paper...

Deriving criteria to select arthropod species for laboratory tests to assess the ecological risks from cultivating arthropod-resistant genetically engineered crops.

PubMed

Romeis, Jörg; Raybould, Alan; Bigler, Franz; Candolfi, Marco P; Hellmich, Richard L; Huesing, Joseph E; Shelton, Anthony M

2013-01-01

Arthropods form a major part of the biodiversity in agricultural landscapes. Many species are valued because they provide ecosystem services, including biological control, pollination and decomposition, or because they are of conservation interest. Some arthropods reduce crop yield and quality, and conventional chemical pesticides, biological control agents and genetically engineered (GE) crops are used to control them. A common concern addressed in the ecological risk assessment (ERA) that precedes regulatory approval of these pest control methods is their potential to adversely affect valued non-target arthropods (NTAs). A key concept of ERA is early-tier testing using worst-case exposure conditions in the laboratory and surrogate test species that are most likely to reveal an adverse effect. If no adverse effects are observed in those species at high exposures, confidence of negligible ecological risk from the use of the pest control method is increased. From experience with chemical pesticides and biological control agents, an approach is proposed for selecting test species for early-tier ERA of GE arthropod-resistant crops. Surrogate species should be selected that most closely meet three criteria: (i) Potential sensitivity: species should be the most likely to be sensitive to the arthropod-active compound based on the known spectrum of activity of the active ingredient, its mode of action, and the phylogenetic relatedness of the test and target species; (ii) species should be representative of valued taxa or functional groups that are most likely to be exposed to the arthropod-active compound in the field; and (iii) Availability and reliability: suitable life-stages of the test species must be obtainable in sufficient quantity and quality, and validated test protocols must be available that allow consistent detection of adverse effects on ecologically relevant parameters. Our proposed approach ensures that the most suitable species are selected for testing and that the resulting data provide the most rigorous test of the risk hypothesis of no adverse effect in order to increase the quality and efficiency of ERAs for cultivation of GE crops. Copyright © 2012 Elsevier Ltd. All rights reserved.

Evaluation of groundwater quality and suitability for irrigation and drinking purposes in southwest Punjab, India using hydrochemical approach

NASA Astrophysics Data System (ADS)

Sharma, Diana Anoubam; Rishi, Madhuri S.; Keesari, Tirumalesh

2017-10-01

Groundwater samples from alluvial aquifers of Bathinda district, southwest Punjab were measured for physicochemical parameters as well as major ion chemistry to evaluate the groundwater suitability for drinking and irrigation purposes and to present the current hydrochemical status of groundwater of this district. Temporal variations were analyzed by comparing the pre- and post-monsoon groundwater chemistry. Most of the samples showed contamination: F- (72 %), Mg2+ (22 %), SO4 2- (28 %), TH (25 %), NO3 - (22 %), HCO3 - (22 %) and TDS (11 %) during pre-monsoon and F- (50 %), Mg2+ (39 %), SO4 2- (22 %), TH (28 %), NO3 - (22 %) and TDS (28 %) during post-monsoon above permissible limits for drinking, while rest of the parameters fall within the limits. Irrigation suitability was checked using sodium absorption ratio (SAR), residual sodium carbonate (RSC), percent sodium (Na%) and permeability index (PI). Most of the samples fall under good to suitable category during pre-monsoon period, but fall under doubtful to unsuitable category during post-monsoon period. Presence of high salt content in groundwater during post-monsoon season reflects leaching of salts present in the unsaturated zone by infiltrating precipitation. Hydrochemical data was interpreted using Piper's trilinear plot and Chadha's plot to understand the various geochemical processes affecting the groundwater quality. The results indicate that the order of cation dominance is Na+ > Mg2+ > Ca2+, while anion dominance is in the order Cl- > HCO3 - > SO4 2-. The geochemistry of groundwater of this district is mainly controlled by the carbonate and silicate mineral dissolution and ion exchange during pre-monsoon and leaching from the salts deposited in vadose zone during post-monsoon. The main sources of contamination are soluble fertilizers and livestock wastes. This study is significant as the surface water resources are limited and the quality and quantity of groundwater are deteriorating with time due to anthropogenic inputs.

Evaluation of karst water quality as an early reference of land suitability mapping for vaname shrimp (Litopenaeusvannamei) culture media

NASA Astrophysics Data System (ADS)

Wildan, D. M.; Affandi, R.; Pratiwi, N. T. M.; Krisanti, M.; Ayu, I. P.; Iswantari, A.

2017-01-01

Vaname shrimp (Litopenaeusvannamei) is one of the excellent fishery commodities in Indonesia. Vaname shrimp farming can be conducted in low salinity water. Low salinity water sources which could be used as culture media is karst water because it has a high mineral. The research was aimedto evaluate land suitability mapping for pond as the vaname shrimpculture mediaseen from the water quality. Research was conducted in May and August 2016. Water sampling was conducted in several locations; Ancol-Jakarta (seawater), Ciseeng-Bogor (karst water salinity), Ciampea-Bogor (karst freshwater), and Situ Gede Bogor (freshwater). Evaluating the suitability of karst water quality for vaname shrimp culture media, done by the results of karst water quality analysis compared with seawater and SNI 01-7246-2006 on shrimp vaname culture media. The results showed that Karst water of Ciseeng and Ciampea could not directly use as vaname shrimp culture media. It is needed water quality treatment of ozonation and aeration of karst water to improve water quality. Ozonation and aeration treatments were able to improve the quality of karst water up to approach the living quality standard of vaname shrimp media.

Multivariate Analysis of the Determinants of the End-Product Quality of Manure-Based Composts and Vermicomposts Using Bayesian Network Modelling.

PubMed

Faverial, Julie; Cornet, Denis; Paul, Jacky; Sierra, Jorge

2016-01-01

Previous studies indicated that the quality of tropical composts is poorer than that of composts produced in temperate regions. The aim of this study was to test the type of manure, the use of co-composting with green waste, and the stabilization method for their ability to improve compost quality in the tropics. We produced 68 composts and vermicomposts that were analysed for their C, lignin and NPK contents throughout the composting process. Bayesian networks were used to assess the mechanisms controlling compost quality. The concentration effect, for C and lignin, and the initial blend quality, for NPK content, were the main factors affecting compost quality. Cattle manure composts presented the highest C and lignin contents, and poultry litter composts exhibited the highest NPK content. Co-composting improved quality by enhancing the concentration effect, which reduced the impact of C and nutrient losses. Vermicomposting did not improve compost quality; co-composting without earthworms thus appears to be a suitable stabilization method under the conditions of this study because it produced high quality composts and is easier to implement.

The application of PGNAA borehole logging for copper grade estimation at Chuquicamata mine.

PubMed

Charbucinski, J; Duran, O; Freraut, R; Heresi, N; Pineyro, I

2004-05-01

The field trials of a prompt gamma neutron activation (PGNAA) spectrometric logging method and instrumentation (SIROLOG) for copper grade estimation in production holes of a porphyry type copper ore mine, Chuquicamata in Chile, are described. Examples of data analysis, calibration procedures and copper grade profiles are provided. The field tests have proved the suitability of the PGNAA logging system for in situ quality control of copper ore.

Method for growth of crystals by pressure reduction of supercritical or subcritical solution

NASA Technical Reports Server (NTRS)

Shlichta, P. J. (Inventor)

1985-01-01

Crystals of high morphological quality are grown by dissolution of a substance to be grown into the crystal in a suitable solvent under high pressure, and by subsequent slow, time-controlled reduction of the pressure of the resulting solution. During the reduction of the pressure interchange of heat between the solution and the environment is minimized by performing the pressure reduction either under isothermal or adiabatic conditions.

Improvements to quality of needle coke by controlled carbonized conditions

NASA Astrophysics Data System (ADS)

Liu, Dong; Lou, Bin; Yu, Ran; Chen, Qingtai; Li, Zhiheng; Zhang, Yadong

2018-06-01

In this study, the selected aromatic-rich fraction derived from hydrocracking tail oil was carbonized and further improvement in the quality of resultant coke was achieved by promoting temperature at the solidification stage. In comparison with conventional process carried out isothermally and isobarically, the coupling analysis between formation and subsequent uni-axial orientation of mesophase textures during the controlled process was systematically discussed on the basis of the mutual relevance among mesophase texture evolution, gas evolution rate and solidification rate of intermediates. The results show that on the premise that formation of bulk mesophase, appropriate rate of gas evolution at a right time of solidification contributes to fine produces fine fibrous mesophase aligned uni-axially and less pores. Moreover, the intermediates with solidification index of 2˜6 are suitable for deformation induced by gas evolution.

Understanding biomaterial-tissue interface quality: combined in vitro evaluation

PubMed Central

Gasik, Michael

2017-01-01

Abstract One of the greatest challenges in the development of new medical products and devices remains in providing maximal patient safety, efficacy and suitability for the purpose. A ‘good quality’ of the tissue-implant interface is one of the most critical factors for the success of the implant integration. In this paper this challenge is being discussed from the point of view of basic stimuli combination to experimental testing. The focus is in particular on bacterial effects on tissue-implant interaction (for different materials). The demonstration of the experimental evaluation of the tissue-implant interface is for dental abutment with mucosal contact. This shows that testing of the interface quality could be the most relevant in controlled conditions, which mimic as possible the clinical applications, but consider variables being under the control of the evaluator. PMID:28970865

[External quality control system in medical microbiology and parasitology in the Czech Republic].

PubMed

Slosárek, M; Petrás, P; Kríz, B

2004-11-01

The External Quality Control System (EQAS) of laboratory activities in medical microbiology and parasitology was implemented in the Czech Republic in 1993 with coded sera samples for diagnosis of viral hepatitis and bacterial strains for identification distributed to first participating laboratories. The number of sample types reached 31 in 2003 and the number of participating laboratories rised from 79 in 1993 to 421 in 2003. As many as 15.130 samples were distributed to the participating laboratories in 2003. Currently, almost all microbiology and parasitology laboratories in the Czech Republic involved in examination of clinical material participate in the EQAS. Based on the 11-year experience gained with the EQAS in the Czech Republic, the following benefits were observed: higher accuracy of results in different tests, standardisation of methods and the use of most suitable test kits.

Overview of the Nordic Seas CARINA data and salinity measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, Are; Key, Robert; Jeansson, Emil

2009-01-01

Water column data of carbon and carbon relevant hydrographic and hydrochemical parameters from 188 previously non-publicly available cruises in the Arctic, Atlantic, and Southern Ocean have been retrieved and merged into a new database: CARINA (CARbon IN the Atlantic). The data have been subject to rigorous quality control (QC) in order to ensure highest possible quality and consistency. The data for most of the parameters included were examined in order to quantify systematic biases in the reported values, i.e. secondary quality control. Significant biases have been corrected for in the data products, i.e. the three merged files with measured, calculatedmore » and interpolated values for each of the three CARINA regions; the Arctic Mediterranean Seas (AMS), the Atlantic (ATL) and the Southern Ocean (SO).With the adjustments the CARINA database is consistent both internally as well as with GLODAP (Key et al., 2004) and is suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation. The Arctic Mediterranean Seas include the Arctic Ocean and the Nordic Seas, and the quality control was carried out separately in these two areas. This contribution provides an overview of the CARINA data from the Nordic Seas and summaries the findings of the QC of the salinity data. One cruise had salinity data that were of questionable quality, and these have been removed from the data product. An evaluation of the consistency of the quality controlled salinity data suggests that they are consistent to at least 0.005.« less

Factors controlling reservoir quality in tertiary sandstones and their significance to geopressured geothermal production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loucks, R.G.; Richmann, D.L.; Milliken, K.L.

1981-01-01

Variable intensity of diagenesis is the factor primarily responsible for contrasting regional reservoir quality of Tertiary sandstones from the upper and lower Texas coast. Detailed comparison of Frio sandstone from the Chocolate Bayou/Danbury Dome area, Brazoria County, and Vicksburg sandstones from the McAllen Ranch Field area, Hidalgo County, reveals that extent of diagenetic modification is most strongly influenced by (1) detrital mineralogy and (2) regional geothermal gradients. The regional reservoir quality of Frio sandstones from Brazoria County is far better than that characterizing Vicksburg sandstones from Hidalgo County, especially at depths suitable for geopressured geothermal energy production. However, in predictingmore » reservoir quality on a site-specific basis, locally variable factors such as relative proportions for porosity types, pore geometry as related to permeability, and local depositional environment must also be considered. Even in an area of regionally favorable reservoir quality, such local factors can significantly affect reservoir quality and, hence, the geothermal production potential of a specific sandstone unit.« less

A Review of Surface Water Quality Models

PubMed Central

Li, Shibei; Jia, Peng; Qi, Changjun; Ding, Feng

2013-01-01

Surface water quality models can be useful tools to simulate and predict the levels, distributions, and risks of chemical pollutants in a given water body. The modeling results from these models under different pollution scenarios are very important components of environmental impact assessment and can provide a basis and technique support for environmental management agencies to make right decisions. Whether the model results are right or not can impact the reasonability and scientificity of the authorized construct projects and the availability of pollution control measures. We reviewed the development of surface water quality models at three stages and analyzed the suitability, precisions, and methods among different models. Standardization of water quality models can help environmental management agencies guarantee the consistency in application of water quality models for regulatory purposes. We concluded the status of standardization of these models in developed countries and put forward available measures for the standardization of these surface water quality models, especially in developing countries. PMID:23853533

Preparation and Quality Control of 68Ga-Citrate for PET Applications

PubMed Central

Aghanejad, Ayuob; Jalilian, Amir Reza; Ardaneh, Khosro; Bolourinovin, Fatemeh; Yousefnia, Hassan; Samani, Ali Bahrami

2015-01-01

Objective(s): In nuclear medicine studies, gallium-68 (8Ga) citrate has been recently known as a suitable infection agent in positron emission tomography (PET). In this study, by applying an in-house produced 68Ge/68Ga generator, a simple technique for the synthesis and quality control of 68Ga-citrate was introduced; followed by preliminary animal studies. Methods: 68GaCl3 eluted from the generator was studied in terms of quality control factors including radiochemical purity (assessed by HPLC and RTLC), chemical purity (assessed by ICP-EOS), radionuclide purity (evaluated by HPGe), and breakthrough. 68Ga-citrate was prepared from eluted 68GaCl3 and sodium citrate under various reaction conditions. Stability of the complex was evaluated in human serum for 2 h at 370C, followed by biodistribution studies in rats for 120 min. Results: 68Ga-citrate was prepared with acceptable radiochemical purity (>97 ITLC and >98% HPLC), specific activity (4-6 GBq/mM), chemical purity (Sn, Fe<0.3 ppm and Zn<0.2 ppm) within 15 min at 500C. The biodistribution of 68Ga-citrate was consistent with former reports up to 120 minutes. Conclusion: This study demonstrated the possible in-house preparation and quality control of 68Ga-citrate, using a commercially available 68Ge/68Ga generator for PET imaging throughout the country. PMID:27408889

Correlation of dissolution and disintegration results for an immediate-release tablet.

PubMed

Nickerson, Beverly; Kong, Angela; Gerst, Paul; Kao, Shangming

2018-02-20

The drug release rate of a rapidly dissolving immediate-release tablet formulation with a highly soluble drug is proposed to be controlled by the disintegration rate of the tablet. Disintegration and dissolution test methods used to evaluate the tablets were shown to discriminate manufacturing process differences and compositionally variant tablets. In addition, a correlation was established between disintegration and dissolution. In accordance with ICH Q6A, this work demonstrates that disintegration in lieu of dissolution is suitable as the drug product quality control method for evaluating this drug product. Copyright © 2017 Elsevier B.V. All rights reserved.

Metal Oxide Gas Sensors, a Survey of Selectivity Issues Addressed at the SENSOR Lab, Brescia (Italy).

PubMed

Ponzoni, Andrea; Baratto, Camilla; Cattabiani, Nicola; Falasconi, Matteo; Galstyan, Vardan; Nunez-Carmona, Estefania; Rigoni, Federica; Sberveglieri, Veronica; Zambotti, Giulia; Zappa, Dario

2017-03-29

This work reports the recent results achieved at the SENSOR Lab, Brescia (Italy) to address the selectivity of metal oxide based gas sensors. In particular, two main strategies are being developed for this purpose: (i) investigating different sensing mechanisms featuring different response spectra that may be potentially integrated in a single device; (ii) exploiting the electronic nose (EN) approach. The former has been addressed only recently and activities are mainly focused on determining the most suitable configuration and measurements to exploit the novel mechanism. Devices suitable to exploit optical (photoluminescence), magnetic (magneto-optical Kerr effect) and surface ionization in addition to the traditional chemiresistor device are here discussed together with the sensing performance measured so far. The electronic nose is a much more consolidated technology, and results are shown concerning its suitability to respond to industrial and societal needs in the fields of food quality control and detection of microbial activity in human sweat.

Metal Oxide Gas Sensors, a Survey of Selectivity Issues Addressed at the SENSOR Lab, Brescia (Italy)

PubMed Central

Ponzoni, Andrea; Baratto, Camilla; Cattabiani, Nicola; Falasconi, Matteo; Galstyan, Vardan; Nunez-Carmona, Estefania; Rigoni, Federica; Sberveglieri, Veronica; Zambotti, Giulia; Zappa, Dario

2017-01-01

This work reports the recent results achieved at the SENSOR Lab, Brescia (Italy) to address the selectivity of metal oxide based gas sensors. In particular, two main strategies are being developed for this purpose: (i) investigating different sensing mechanisms featuring different response spectra that may be potentially integrated in a single device; (ii) exploiting the electronic nose (EN) approach. The former has been addressed only recently and activities are mainly focused on determining the most suitable configuration and measurements to exploit the novel mechanism. Devices suitable to exploit optical (photoluminescence), magnetic (magneto-optical Kerr effect) and surface ionization in addition to the traditional chemiresistor device are here discussed together with the sensing performance measured so far. The electronic nose is a much more consolidated technology, and results are shown concerning its suitability to respond to industrial and societal needs in the fields of food quality control and detection of microbial activity in human sweat. PMID:28353673

The effects of a team-based continuous quality improvement intervention on the management of primary care: a randomised controlled trial

PubMed Central

Engels, Yvonne; van den Hombergh, Pieter; Mokkink, Henk; van den Hoogen, Henk; van den Bosch, Wil; Grol, Richard

2006-01-01

Aim To study the effects of a team-based model for continuous quality improvement (CQI) on primary care practice management. Design of study Randomised controlled trial. Setting Twenty-six intervention and 23 control primary care practices in the Netherlands. Method Practices interested in taking part in the CQI project were, after assessment of their practice organisation, randomly assigned to the intervention or control groups. During a total of five meetings, a facilitator helped the teams in the intervention group select suitable topics for quality improvement and follow a structured approach to achieve improvement objectives. Checklists completed by an outreach visitor, questionnaires for the GPs, staff and patients were used to assemble data on the number and quality of improvement activities undertaken and on practice management prior to the start of the intervention and 1 year later. Results Pre-test and post-test data were compared for the 26 intervention and 23 control practices. A significant intervention effect was found for the number of improvement objectives actually defined (93 versus 54, P<0.001) and successfully completed (80 versus 69% of the projects, P<0.001). The intervention group also improved on more aspects of practice management, as measured by our practice visit method, than the control group but none of these differences proved statistically significant. Conclusion The intervention exerted a significant effect on the number and quality of improvement projects undertaken and self-defined objectives met. Failure of the effects of the intervention on the other dimensions of practice management to achieve significance may be due to the topics selected for some of the improvement projects being only partly covered by the assessment instrument. PMID:17007709

Portable Holographic Interferometry Testing System: Application to crack patching quality control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heslehurst, R.B.; Baird, J.P.; Williamson, H.M.

Over recent years the repair of metallic structures has been improved through the use of patches fabricated from composite materials and adhesively bonded to the damaged area. This technology is termed crack patching, and has been successfully and extensively used by the RAAF and the USAF. However, application of the technology to civilian registered aircraft has had limited success due to the apparent lack of suitable quality assurance testing methods and the airworthiness regulators concern overpatch adhesion integrity. Holographic interferometry has previously shown the advantages of detecting out-of-plane deformations of the order of the wavelength of light (1{mu}). Evidence willmore » be presented that holography is able to detect changes in load path due to debonds and weakened adhesion in an adhesively bonded patch. A Portable Holographic Interferometry Testing System (PHITS) which overcomes the vibration isolation problem associated with conventional holography techniques has been developed. The application of PHITS to crack patching technology now provides a suitable method to verify the integrity of bonded patches in-situ.« less

Suitability of the echo-time-shift method as laboratory standard for thermal ultrasound dosimetry

NASA Astrophysics Data System (ADS)

Fuhrmann, Tina; Georg, Olga; Haller, Julian; Jenderka, Klaus-Vitold

2017-03-01

Ultrasound therapy is a promising, non-invasive application with potential to significantly improve cancer therapies like surgery, viro- or immunotherapy. This therapy needs faster, cheaper and more easy-to-handle quality assurance tools for therapy devices as well as possibilities to verify treatment plans and for dosimetry. This limits comparability and safety of treatments. Accurate spatial and temporal temperature maps could be used to overcome these shortcomings. In this contribution first results of suitability and accuracy investigations of the echo-time-shift method for two-dimensional temperature mapping during and after sonication are presented. The analysis methods used to calculate time-shifts were a discrete frame-to-frame and a discrete frame-to-base-frame algorithm as well as a sigmoid fit for temperature calculation. In the future accuracy could be significantly enhanced by using continuous methods for time-shift calculation. Further improvements can be achieved by improving filtering algorithms and interpolation of sampled diagnostic ultrasound data. It might be a comparatively accurate, fast and affordable method for laboratory and clinical quality control.

High-resolution mobile optical 3D scanner with color mapping

NASA Astrophysics Data System (ADS)

Ramm, Roland; Bräuer-Burchardt, Christian; Kühmstedt, Peter; Notni, Gunther

2017-07-01

A high-resolution mobile handheld scanning device suitable for 3D data acquisition and analysis for forensic investigations, rapid prototyping, design, quality management, and archaeology with a measurement volume of approximately 325 mm x 200 mm x 100mm and a lateral object resolution of 170 µm developed at our institute is introduced. The scanners weight is 4.4 kg with an optional color DLSR camera. The PC for measurement control and point calculation is included inside the housing. Power supply is realized by rechargeable batteries. Possible operation time is between 30 and 60 minutes. The object distance is between 400 and 500 mm, and the scan time for one 3D shot may vary between 0.1 and 0.5 seconds. The complete 3D result is obtained a few seconds after starting the scan. For higher quality 3D and color images the scanner is attachable to tripod use. Measurement objects larger than the measurement volume must be acquired partly. The different resulting datasets are merged using a suitable software module. The scanner has been successfully used in various applications.

An appraisal of the quality of surface water in the Sevier Lake basin, Utah, 1964

USGS Publications Warehouse

Hahl, D.C.; Mundorff, J.C.

1968-01-01

The Sevier and Beaver River systems are the two major river systems in the Sevier Lake basin in Utah. This report contains an analysis of reconnaissance data collected during the 1964 water year regarding the quality of water in these rivers and their tributaries. The purpose of the reconnaissance was to obtain needed water-quality information for the basin. Corollary purposes were to (1) determine the suitability of surface water for specificuses, (2) determine the need and criteria for a water-quality network, and (3) locate sources of organic pollution to the rivers. Data concerning item 3 are mentioned only briefly in this report and will be discussed in a report to be prepared by the Utah Water Pollution and Control Board. Data collected in connection with the reconnaissance and resulting analyses were reported by Hahl and Cabell (1965).

Printed health information materials: evaluation of readability and suitability.

PubMed

Shieh, Carol; Hosei, Barbara

2008-01-01

This study examined readability and suitability of printed health information materials colleted from multiple sources. In phase I, nursing students used Simple Measure of Gobbledygook (SMOG; McLaughlin, 1969) to assess the readability of 21 materials collected from the community. In phases II and III, nursing students and registered nurses used SMOG and the Suitability Assessment of Materials (SAM; Doak, Doak, & Root, 1996) to evaluate 15 prenatal materials from a Healthy Start program. SMOG assigns a reading grade level based on the number of words with 3 or more syllables. SAM has 22 items in 6 evaluation areas: content, literacy demand, graphics, layout and typography, learning stimulation and motivation, and cultural appropriateness. Major findings included that 53% to 86% of the printed materials had a reading level at or higher than 9th grade; materials lacked summary, interaction, and modeled behaviors, and registered nurses rated more materials as not suitable and fewer as superior for suitability qualities than students. Improving printed materials to have lower reading levels and better suitability qualities are indicated.

75 FR 24892 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... Industry Support Calculation Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses... employs an industry-wide test to determine whether, under section 773(c)(1)(B), available information in... sections 771(33)(E) and (F) of the Act. In addition, we find that Shandong Sun Paper Industry Joint Stock...

Low-Temperature Fumigation of Harvested Lettuce Using a Phosphine Generator.

PubMed

Liu, Yong-Biao

2018-02-28

A research-scale phosphine generator, QuickPHlo-R, from United Phosphorus Ltd. (Mumbai, India) was tested to determine whether it was suitable for low-temperature fumigation and oxygenated phosphine fumigation of harvested lettuce. Vacuum cooled Iceberg and Romaine lettuce (Lactuca sativa) were fumigated in 442-liter chambers at 2°C for 24 and 72 h for control of western flower thrips [Frankliniella occidentalis (Pergande) (Thysanoptera: Thripidae)] and lettuce aphid [Nasonovia ribisnigri (Mosely) (Homoptera: Aphididae)]. Oxygenated phosphine fumigation for 48 h under 60% O2 was also conducted at 2°C with Iceberg and Romaine lettuce for control of lettuce aphid. The generator completed phosphine generation in 60-90 min. Complete control of western flower thrips was achieved in 24-h treatment, and the 48-h oxygenated fumigation, and 72-h regular fumigation treatments completely controlled lettuce aphid. Lettuce quality was evaluated 14 d after fumigation. There was increased incidence of brown stains on fumigated Iceberg lettuce, and the increases were more obvious in longer (≥48 h) treatments. Both Iceberg and Romaine lettuce from all treatments and controls had good visual quality even though there was significantly higher brown stain incidence on fumigated Iceberg lettuce in ≥48-h treatment and significant differences in quality score for both Iceberg and Romaine lettuce in the 72-h treatment. The brown stains were likely due to the high sensitivity of lettuce to carbon dioxide. The study indicated that QuiPHlo-R phosphine generator has potential in low-temperature phosphine fumigation due to the quick establishment of desired phosphine levels, efficacy in pest control, and reasonable safety to product quality.

Continuous integration and quality control for scientific software

NASA Astrophysics Data System (ADS)

Neidhardt, A.; Ettl, M.; Brisken, W.; Dassing, R.

2013-08-01

Modern software has to be stable, portable, fast and reliable. This is going to be also more and more important for scientific software. But this requires a sophisticated way to inspect, check and evaluate the quality of source code with a suitable, automated infrastructure. A centralized server with a software repository and a version control system is one essential part, to manage the code basis and to control the different development versions. While each project can be compiled separately, the whole code basis can also be compiled with one central “Makefile”. This is used to create automated, nightly builds. Additionally all sources are inspected automatically with static code analysis and inspection tools, which check well-none error situations, memory and resource leaks, performance issues, or style issues. In combination with an automatic documentation generator it is possible to create the developer documentation directly from the code and the inline comments. All reports and generated information are presented as HTML page on a Web server. Because this environment increased the stability and quality of the software of the Geodetic Observatory Wettzell tremendously, it is now also available for scientific communities. One regular customer is already the developer group of the DiFX software correlator project.

Purification of High Molecular Weight Genomic DNA from Powdery Mildew for Long-Read Sequencing.

PubMed

Feehan, Joanna M; Scheibel, Katherine E; Bourras, Salim; Underwood, William; Keller, Beat; Somerville, Shauna C

2017-03-31

The powdery mildew fungi are a group of economically important fungal plant pathogens. Relatively little is known about the molecular biology and genetics of these pathogens, in part due to a lack of well-developed genetic and genomic resources. These organisms have large, repetitive genomes, which have made genome sequencing and assembly prohibitively difficult. Here, we describe methods for the collection, extraction, purification and quality control assessment of high molecular weight genomic DNA from one powdery mildew species, Golovinomyces cichoracearum. The protocol described includes mechanical disruption of spores followed by an optimized phenol/chloroform genomic DNA extraction. A typical yield was 7 µg DNA per 150 mg conidia. The genomic DNA that is isolated using this procedure is suitable for long-read sequencing (i.e., > 48.5 kbp). Quality control measures to ensure the size, yield, and purity of the genomic DNA are also described in this method. Sequencing of the genomic DNA of the quality described here will allow for the assembly and comparison of multiple powdery mildew genomes, which in turn will lead to a better understanding and improved control of this agricultural pathogen.

Groundwater quality assessment of the quaternary unconsolidated sedimentary basin near the Pi river using fuzzy evaluation technique

NASA Astrophysics Data System (ADS)

Mohamed, Adam Khalifa; Liu, Dan; Mohamed, Mohamed A. A.; Song, Kai

2018-05-01

The present study was carried out to assess the groundwater quality for drinking purposes in the Quaternary Unconsolidated Sedimentary Basin of the North Chengdu Plain, China. Six groups of water samples (S1, S2, S3, S4, S5, and S6) are selected in the study area. These samples were analyzed for 19 different physicochemical water quality parameters to assess groundwater quality. The physicochemical parameters of groundwater were compared with China's Quality Standards for Groundwater (GB/T14848-93). Interpretation of physicochemical data revealed that groundwater in the basin was slightly alkaline. Total hardness and total dissolved solid values show that the investigated water is classified as very hard and fresh water, respectively. The sustainability of groundwater for drinking purposes was assessed based on the fuzzy mathematics evaluation (FME) method. The results of the assessment were classified into five groups based on their relative suitability for portable use (grade I = most suitable to grade V = least suitable), according to (GB/T 14848-93). The assessment results reveal that the quality of groundwater in most of the wells was class I, II and III and suitable for drinking purposes, but well (S2) has been found to be in class V, which is classified as very poor and cannot be used for drinking. Also, the FME method was compared with the comprehensive evaluation method. The FME method was found to be more comprehensive and reasonable to assess groundwater quality. This study can provide an important frame of reference for decision making on improving groundwater quality in the study area and nearby surrounding.

Evaluation of analytical markers characterising different drying methods of parsley leaves (Petroselinum crispum L.).

PubMed

Lechtenberg, M; Zumdick, S; Gerhards, C; Schmidt, T J; Hensel, A

2007-12-01

Drying process of parsley leaves from Petroselinum crispum L. can influence the sensory qualities and aromatic taste of this herbal product. Beside oven-dried material, freeze-dried parsley is getting increasingly into the market. In the course of a search for analytical tools to differentiate oven-dried and lyophilised parsley, a HPLC determination of the 6"-O-malonylapiin to apiin ratio was shown to be a suitable marker system. While the ratio is high for fresh and lyophilised leave material, oven-drying leads to demalonylation and, subsequently, to a low malonylapiin--apiin ratio. Additionally, L*a*b colour measurement can be used for quality control to differentiate between different dried parsley raw materials.

Closed-Loop Control of Humidification for Artifact Reduction in Capacitive ECG Measurements.

PubMed

Leicht, Lennart; Eilebrecht, Benjamin; Weyer, Soren; Leonhardt, Steffen; Teichmann, Daniel

2017-04-01

Recording biosignals without the need for direct skin contact offers new opportunities for ubiquitous health monitoring. Electrodes with capacitive coupling have been shown to be suitable for the monitoring of electrical potentials on the body surface, in particular ECG. However, due to triboelectric charge generation and motion artifacts, signal and thus diagnostic quality is inferior to galvanic coupling. Active closed-loop humidification of capacitive electrodes is proposed in this work as a new concept to improve signal quality. A capacitive ECG recording system integrated into a common car seat is presented. It can regulate the micro climate at the interface of electrode and patient by actively dispensing water vapour and monitoring humidity in a closed-loop approach. As a regenerative water reservoir, silica gel is used. The system was evaluated with respect to subjective and objective ECG signal quality. Active humidification was found to have a significant positive effect in case of previously poor quality. Also, it had no diminishing effect in case of already good signal quality.

Amoeba-related health risk in drinking water systems: could monitoring of amoebae be a complementary approach to current quality control strategies?

PubMed

Codony, Francesc; Pérez, Leonardo Martín; Adrados, Bárbara; Agustí, Gemma; Fittipaldi, Mariana; Morató, Jordi

2012-01-01

Culture-based methods for fecal indicator microorganisms are the standard protocol to assess potential health risk from drinking water systems. However, these traditional fecal indicators are inappropriate surrogates for disinfection-resistant fecal pathogens and the indigenous pathogens that grow in drinking water systems. There is now a range of molecular-based methods, such as quantitative PCR, which allow detection of a variety of pathogens and alternative indicators. Hence, in addition to targeting total Escherichia coli (i.e., dead and alive) for the detection of fecal pollution, various amoebae may be suitable to indicate the potential presence of pathogenic amoeba-resisting microorganisms, such as Legionellae. Therefore, monitoring amoeba levels by quantitative PCR could be a useful tool for directly and indirectly evaluating health risk and could also be a complementary approach to current microbial quality control strategies for drinking water systems.

A novel approach to rapidly explore analytical markers for quality control of Radix Salviae Miltiorrhizae extract granules by robust principal component analysis with ultra-high performance liquid chromatography-ultraviolet-quadrupole time-of-flight mass spectrometry.

PubMed

Song, Jing-Zheng; Li, Song-Lin; Zhou, Yan; Qiao, Chun-Feng; Chen, Shi-Lin; Xu, Hong-Xi

2010-11-02

In a well-controlled experiment, outliers discriminated by robust principal component analysis (RPCA) represent contents in samples which are of particular quality distinguishable from the rest of the others, therefore chemical constituents in a natural product causing discrimination between outliers and the majority of samples could be considered as analytical markers for quality control. Based on this strategy, a novel approach for rapidly exploring characteristic analytical markers was proposed for the quality control of extract granules of Radix Salviae Miltiorrhizae (EGRSM). In this study, large sizes of samples were analyzed via high-throughput ultra-high performance liquid chromatography-ultraviolet-quadrupole time-of-flight mass spectrometry (UHPLC-UV-Q-Tof MS). RPCA was first performed on the three groups of samples: RSM (the raw material), the in-house prepared aqueous extract of Radix Salviae Miltiorrhizae (AERSM) and commercial product of EGRSM, to determine the variation of specific constituents between raw material and the final products as well as the effect of manufacturing process on the overall quality. Then RPCA was performed on the commercial products of EGRSM to explore the applicability of identified characteristic markers for the quality control of EGRSM. Candidate markers were extracted by RPCA, and their molecular formulae were determined by high resolution electrospray ionization-mass spectrometric (ESI-MS) analysis. The suitability of identified markers was then evaluated by determining the relationship between quantities of the identified markers with their antioxidant activities biologically, and further confirmed in a variety of samples. In conclusion, the combination of RPCA with UHPLC-UV-Q-Tof MS is a reliable means to identify chemical markers for evaluating quality of herbal medicines. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Applicability of refractometry for fast routine checking of hospital preparations.

PubMed

Hendrickx, Stijn; Verón, Aurora Monteagudo; Van Schepdael, Ann; Adams, Erwin

2016-04-30

Quality control of hospital pharmacy formulations is of the utmost importance to ensure constant quality and to avoid potential mistakes before administration to the patient. In this study we investigated the applicability of refractometry as a fast, inexpensive and easy-to-use quality control measurement. Refractive indices (RI) of a multitude of different hospital formulations with varying concentrations of active compound were measured. The samples consisted of a number of binary aqueous solutions (one compound in water), complex aqueous solutions (multiple compounds in water or in a constant matrix), two suspensions and one emulsion. For all these formulations, linear regression analysis was performed, quality control limits determined and accuracy and repeatability were checked. Subsequently, actual hospital pharmacy samples were analyzed to check whether they were within the specified limits. For both binary and complex aqueous formulations, repeatability was good and a linear correlation for all samples could be observed on condition that the concentration of the active compound was sufficiently high. The refractometer was not sensitive enough for solutions of folic acid and levothyroxine, which had too low a concentration of active compound. Due to lack of homogeneity and light scattering, emulsions and suspensions do not seem suitable for quality control by refractometry. A mathematical equation was generated to predict the refractive index of an aqueous solution containing clonidine HCl as active compound. Values calculated from the equation were compared with measured values and deviations of all samples were found to be lower than 1.3%. In order to use refractometry in a hospital pharmacy for quality control of multicomponent samples, additional intermediate measurements would be required, to overcome the fact that refractometry is not compound specific. In conclusion, we found that refractometry could potentially be useful for daily, fast quality measurements of relatively concentrated binary and more complex aqueous solutions in the hospital pharmacy. Copyright © 2016 Elsevier B.V. All rights reserved.

Design and development of a LabVIEW-based LED-induced fluorescence spectroscopy system with applications in non-destructive quality assessment of agricultural products

NASA Astrophysics Data System (ADS)

Abbasi, Hamed; Nazeri, Majid; Mireei, Seyed Ahmad

2016-01-01

Over the past several years, the demand for high quality agricultural products has been remarkably increased. Thus, it is important to use non-destructive methods for product quality monitoring. LED-induced fluorescence spectroscopy has proved its potential for nondestructive detection of some defects in agricultural products, such as tissue browning and bruising. Due to such defects, changes in the polyphenol and chlorophyll contents occur which can be considered as the visible marks of decreasing fruit quality. In the present work, a fluorescence spectrometer (spectrofluorometer) controlled by LabVIEW software was designed and developed. In this spectrometer, a consumer-grade webcam was used as an imaging sensor. The spectrometer was able to measure the fluorescence spectra directly from the fruit and vegetable surface in the desired regions. To do so, the spectrometer was equipped with a suitable fiber-optic probe. The hardware solution was based on data acquisition working on the USB platform and controlled by the application running on the PC. In this system, light emitting diodes with different wavelengths were used as the excitation sources for inducing fluorescence spectra of some famous fruits and vegetables.

Pollution loads in urban runoff and sanitary wastewater.

PubMed

Taebi, Amir; Droste, Ronald L

2004-07-05

While more attention has been paid in recent years to urban point source pollution control through the establishment of wastewater treatment plants in many developing countries, no considerable planning nor any serious measures have been taken to control urban non-point source pollution (urban stormwater runoff). The present study is a screening analysis to investigate the pollution loads in urban runoff compared to point source loads as a first prerequisite for planning and management of receiving water quality. To compare pollutant loads from point and non-point urban sources, the pollutant load is expressed as the weight of pollutant per hectare area per year (kg/ha.year). Unit loads were estimated in stormwater runoff, raw sanitary wastewater and secondary treatment effluents in Isfahan, Iran. Results indicate that the annual pollution load in urban runoff is lower than the annual pollution load in sanitary wastewater in areas with low precipitation but it is higher in areas with high precipitation. Two options, namely, advanced treatment (in lieu of secondary treatment) of sanitary wastewater and urban runoff quality control systems (such as detention ponds) were investigated as controlling systems for pollution discharges into receiving waters. The results revealed that for Isfahan, as a low precipitation urban area, advanced treatment is a more suitable option, but for high precipitation urban areas, urban surface runoff quality control installations were more effective for suspended solids and oxygen-demanding matter controls, and that advanced treatment is the more effective option for nutrient control.

Observer-based state tracking control of uncertain stochastic systems via repetitive controller

NASA Astrophysics Data System (ADS)

Sakthivel, R.; Susana Ramya, L.; Selvaraj, P.

2017-08-01

This paper develops the repetitive control scheme for state tracking control of uncertain stochastic time-varying delay systems via equivalent-input-disturbance approach. The main purpose of this work is to design a repetitive controller to guarantee the tracking performance under the effects of unknown disturbances with bounded frequency and parameter variations. Specifically, a new set of linear matrix inequality (LMI)-based conditions is derived based on the suitable Lyapunov-Krasovskii functional theory for designing a repetitive controller which guarantees stability and desired tracking performance. More precisely, an equivalent-input-disturbance estimator is incorporated into the control design to reduce the effect of the external disturbances. Simulation results are provided to demonstrate the desired control system stability and their tracking performance. A practical stream water quality preserving system is also provided to show the effectiveness and advantage of the proposed approach.

Use of modified atmosphere packaging to preserve mushroom quality during storage.

PubMed

Palacios, Irene; Moro, Carlos; Lozano, Miguel; D'Arrigo, Matilde; Guillamón, Eva; García-Lafuente, Ana; Villares, Ana

2011-09-01

Mushrooms have attracted much attention due to their excellent nutritional and sensory properties. However, they are highly perishable and rapidly lose their organoleptic characteristics. Many methods have been employed for mushroom storage, such as packaging, blanching, canning, or freeze drying. Among them, modified atmosphere packaging (MAP) has been widely employed for preserving fresh mushrooms. MAP provides an affordable packaging system that partly avoids enzymatic browning, fermentation and other biochemical processes by maintaining a controlled gas atmosphere. Several factors, including optimum CO2 and O2 partial pressures, permeability, package material, thickness, or product weight, must be considered in order to design a suitable modified atmosphere package for mushrooms. Thus, different strategies are available to preserve mushroom quality after harvest. The article presents some promising patents on use of modified atmosphere packaging to preserve mushroom quality during storage.

Water Quality Conditions Monitored at the Corps’ Fort Peck Project in Montana during the 3-Year Period 2004 through 2006

DTIC Science & Technology

2007-03-01

standards. As such, the reservoir is to be maintained suitable for drinking, culinary , and food processing purposes, after conventional treatment; bathing...to the Montana/North Dakota state line. Both B-2 and B-3 waters are to be maintained suitable for drinking, culinary and food processing purposes...QUAL-W2 is a “state-of-the- art ” water quality model that can greatly facilitate addressing reservoir water quality management issues. CE-QUAL-W2 is a

Multivariate Analysis of the Determinants of the End-Product Quality of Manure-Based Composts and Vermicomposts Using Bayesian Network Modelling

PubMed Central

Faverial, Julie; Cornet, Denis; Paul, Jacky

2016-01-01

Previous studies indicated that the quality of tropical composts is poorer than that of composts produced in temperate regions. The aim of this study was to test the type of manure, the use of co-composting with green waste, and the stabilization method for their ability to improve compost quality in the tropics. We produced 68 composts and vermicomposts that were analysed for their C, lignin and NPK contents throughout the composting process. Bayesian networks were used to assess the mechanisms controlling compost quality. The concentration effect, for C and lignin, and the initial blend quality, for NPK content, were the main factors affecting compost quality. Cattle manure composts presented the highest C and lignin contents, and poultry litter composts exhibited the highest NPK content. Co-composting improved quality by enhancing the concentration effect, which reduced the impact of C and nutrient losses. Vermicomposting did not improve compost quality; co-composting without earthworms thus appears to be a suitable stabilization method under the conditions of this study because it produced high quality composts and is easier to implement. PMID:27314950

Water quality evaluation system to assess the status and the suitability of the Citarum river water to different uses.

PubMed

Fulazzaky, Mohamad Ali

2010-09-01

Water quality degradation in the Citarum river will increase from the year to year due to increasing pollutant loads when released particularly from Bandung region of the upstream areas into the river without treatment. This will be facing the problems on water quality status to use for multi-purposes in the downstream areas. The water quality evaluation system is used to evaluate the available water condition that distinguishes into two categories, i.e., the water quality index (WQI) and water quality aptitude (WQA). The assessment of water quality for the Citarum river from 10 selected stations was found that the WQI situates in the bad category generally and the WQA ranges from the suitable quality for agriculture and livestock watering uses to the unsuitable for biological potential function, drinking water production, and leisure activities and sports in the upstream areas of Saguling dam generally.

Implementation of a generic SFC-MS method for the quality control of potentially counterfeited medicinal cannabis with synthetic cannabinoids.

PubMed

Jambo, Hugues; Dispas, Amandine; Avohou, Hermane T; André, Sébastien; Hubert, Cédric; Lebrun, Pierre; Ziemons, Éric; Hubert, Philippe

2018-06-05

In this study, we describe the development of a SFC-MS method for the quality control of cannabis plants that could be potentially adulterated with synthetic cannabinoids. Considering the high number of already available synthetic cannabinoids and the high rate of development of novel structures, we aimed to develop a generic method suitable for the analysis of a large panel of substances using seventeen synthetic cannabinoids from multiple classes as model compounds. Firstly, a suitable column was chosen after a screening phase. Secondly, optimal operating conditions were obtained following a robust optimization strategy based on a design of experiments and design space methodology (DoE-DS). Finally, the quantitative performances of the method were assessed with a validation according to the total error approach. The developed method has a run time of 9.4 min. It uses a simple modifier composition of methanol with 2% H 2 O and requires minimal sample preparation. It can chromatographically separate natural cannabinoids (except THC-A and CBD-A) from the synthetics assessed. Also, the use of mass spectrometry provides sensitivity and specificity. Moreover, this quality by design (QbD) approach permits the tuning of the method (within the DS) during routine analysis to achieve a desirable separation since the future compounds that should be analyzed could be unknown. The method was validated for the quantitation of a selected synthetic cannabinoid in fiber-type cannabis matrix over the range of 2.5% - 7.5% (w/w) with LOD value as low as 14.4 ng/mL. This generic method should be easy to implement in customs or QC laboratories in the context of counterfeit drugs tracking. Copyright © 2018 Elsevier B.V. All rights reserved.

Ethanolic carbon-11 chemistry: the introduction of green radiochemistry.

PubMed

Shao, Xia; Fawaz, Maria V; Jang, Keunsam; Scott, Peter J H

2014-07-01

The principles of green chemistry have been applied to a radiochemistry setting. Eleven carbon-11 labeled radiopharmaceuticals have been prepared using ethanol as the only organic solvent throughout the entire manufacturing process. The removal of all other organic solvents from the process simplifies production and quality control (QC) testing, moving our PET Center towards the first example of a green radiochemistry laboratory. All radiopharmaceutical doses prepared are suitable for clinical use. Copyright © 2014 Elsevier Ltd. All rights reserved.

Epitaxial CdSe-Au nanocrystal heterostructures by thermal annealing.

PubMed

Figuerola, Albert; van Huis, Marijn; Zanella, Marco; Genovese, Alessandro; Marras, Sergio; Falqui, Andrea; Zandbergen, Henny W; Cingolani, Roberto; Manna, Liberato

2010-08-11

The thermal evolution of a collection of heterogeneous CdSe-Au nanosystems (Au-decorated CdSe nanorods, networks, vertical assemblies) prepared by wet-chemical approaches was monitored in situ in the transmission electron microscope. In contrast to interfaces that are formed during kinetically controlled wet chemical synthesis, heating under vacuum conditions results in distinct and well-defined CdSe/Au interfaces, located at the CdSe polar surfaces. The high quality of these interfaces should make the heterostructures more suitable for use in nanoscale electronic devices.

DNA methods for identification of Chinese medicinal materials

PubMed Central

Yip, Pui Ying; Chau, Chi Fai; Mak, Chun Yin; Kwan, Hoi Shan

2007-01-01

As adulterated and substituted Chinese medicinal materials are common in the market, therapeutic effectiveness of such materials cannot be guaranteed. Identification at species-, strain- and locality-levels, therefore, is required for quality assurance/control of Chinese medicine. This review provides an informative introduction to DNA methods for authentication of Chinese medicinal materials. Technical features and examples of the methods based on sequencing, hybridization and polymerase chain reaction (PCR) are described and their suitability for different identification objectives is discussed. PMID:17803808

Bisphenol A polycarbonate as a reference material

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Cumming, H. J.; Williams, J. B.

1977-01-01

Test methods require reference materials to standardize and maintain quality control. Various materials have been evaluated as possible reference materials, including a sample of bisphenol A polycarbonate without additives. Screening tests for relative toxicity under various experimental conditions were performed using male mice exposed to pyrolysis effluents over a 200-800 C temperature range. It was found that the bisphenol A polycarbonate served as a suitable reference material as it is available in large quantities, and does not significantly change with time.

Application of Aquaculture Monitoring System Based on CC2530

NASA Astrophysics Data System (ADS)

Chen, H. L.; Liu, X. Q.

In order to improve the intelligent level of aquaculture technology, this paper puts forward a remote wireless monitoring system based on ZigBee technology, GPRS technology and Android mobile phone platform. The system is composed of wireless sensor network (WSN), GPRS module, PC server, and Android client. The WSN was set up by CC2530 chips based on ZigBee protocol, to realize the collection of water quality parameters such as the water level, temperature, PH and dissolved oxygen. The GPRS module realizes remote communication between WSN and PC server. Android client communicates with server to monitor the level of water quality. The PID (proportion, integration, differentiation) control is adopted in the control part, the control commands from the android mobile phone is sent to the server, the server again send it to the lower machine to control the water level regulating valve and increasing oxygen pump. After practical testing to the system in Liyang, Jiangsu province, China, temperature measurement accuracy reaches 0.5°C, PH measurement accuracy reaches 0.3, water level control precision can be controlled within ± 3cm, dissolved oxygen control precision can be controlled within ±0.3 mg/L, all the indexes can meet the requirements, this system is very suitable for aquaculture.

Methods of increasing the performance of radionuclide generators used in nuclear medicine: daughter nuclide build-up optimisation, elution-purification-concentration integration, and effective control of radionuclidic purity.

PubMed

Le, Van So; Do, Zoe Phuc-Hien; Le, Minh Khoi; Le, Vicki; Le, Natalie Nha-Truc

2014-06-10

Methods of increasing the performance of radionuclide generators used in nuclear medicine radiotherapy and SPECT/PET imaging were developed and detailed for 99Mo/99mTc and 68Ge/68Ga radionuclide generators as the cases. Optimisation methods of the daughter nuclide build-up versus stand-by time and/or specific activity using mean progress functions were developed for increasing the performance of radionuclide generators. As a result of this optimisation, the separation of the daughter nuclide from its parent one should be performed at a defined optimal time to avoid the deterioration in specific activity of the daughter nuclide and wasting stand-by time of the generator, while the daughter nuclide yield is maintained to a reasonably high extent. A new characteristic parameter of the formation-decay kinetics of parent/daughter nuclide system was found and effectively used in the practice of the generator production and utilisation. A method of "early elution schedule" was also developed for increasing the daughter nuclide production yield and specific radioactivity, thus saving the cost of the generator and improving the quality of the daughter radionuclide solution. These newly developed optimisation methods in combination with an integrated elution-purification-concentration system of radionuclide generators recently developed is the most suitable way to operate the generator effectively on the basis of economic use and improvement of purposely suitable quality and specific activity of the produced daughter radionuclides. All these features benefit the economic use of the generator, the improved quality of labelling/scan, and the lowered cost of nuclear medicine procedure. Besides, a new method of quality control protocol set-up for post-delivery test of radionuclidic purity has been developed based on the relationship between gamma ray spectrometric detection limit, required limit of impure radionuclide activity and its measurement certainty with respect to optimising decay/measurement time and product sample activity used for QC quality control. The optimisation ensures a certainty of measurement of the specific impure radionuclide and avoids wasting the useful amount of valuable purified/concentrated daughter nuclide product. This process is important for the spectrometric measurement of very low activity of impure radionuclide contamination in the radioisotope products of much higher activity used in medical imaging and targeted radiotherapy.

Design and fabrication of GaAs OMIST photodetector

NASA Astrophysics Data System (ADS)

Kang, Xuejun; Lin, ShiMing; Liao, Qiwei; Gao, Junhua; Liu, Shi'an; Cheng, Peng; Wang, Hongjie; Zhang, Chunhui; Wang, Qiming

1998-08-01

We designed and fabricated GaAs OMIST (Optical-controlled Metal-Insulator-Semiconductor Thyristor) device. Using oxidation of AlAs layer that is grown by MBE forms the Ultra- Thin semi-Insulating layer (UTI) of the GAAS OMIST. The accurate control and formation of high quality semi-insulating layer (AlxOy) are the key processes for fabricating GaAs OMIST. The device exhibits a current-controlled negative resistance region in its I-V characteristics. When illuminated, the major effect of optical excitation is the reduction of the switching voltage. If the GaAs OMIST device is biased at a voltage below its dark switching voltage Vs, sufficient incident light can switch OMIST from high impedance low current 'off' state to low impedance high current 'on' state. The absorbing material of OMIST is GaAS, so if the wavelength of incident light within 600 to approximately 850 nm can be detected effectively. It is suitable to be used as photodetector for digital optical data process. The other attractive features of GaAs OMIST device include suitable conducted current, switching voltage and power levels for OEIC, high switch speed and high sensitivity to light or current injection.

Quality control of banked milk in Brasilia, Brazil.

PubMed

Almeida, Simone G; Dórea, José G

2006-08-01

The authors studied quality control procedures at human milk banks and nutritional profiles of 909 milk samples (from 195 donors, aged 15 to 45 years) from banked human milk (BHM) in Brasília, Brazil. Number of donations per donor ranged from 1 to > 10 that consisted mostly of mature milk (90.9%) with a mean total energy of 529 +/- 85 kcal/L and a mean total lipid of 22.7 g/L +/- 13.2. Microbiological quality (titrable acidity-Dornic, degrees D) was suitable for infant feeding in 99.2% of samples (< 8 degrees D), ranging from 2 degrees D to 8 degrees D (mean 4.8 +/- 1.4 degrees D). Most BHM (98.1%) samples were dispensed to inpatient infants (1-7 days) diagnosed with respiratory distress (30.1%), prematurity (20.7%), metabolic distress (16.0%), jaundice (14.4%), bacterial infection (6.0%), pneumonia (3.3%), congenital cardiac distress (2.2%), or other conditions (6.2%). Well-motivated mothers and trained staff are serving and sustaining an important life-saving network with long-lasting impact on public health.

[Cultural regionalization for Notopterygium incisum based on 3S technology platform. I. Evaluation for growth suitability for N. incisum based on ecological factors analysis by Maxent and ArcGIS model].

PubMed

Sun, Hong-bing; Sun, Hui; Jiang, Shun-yuan; Zhou, Yi; Cao, Wen-long; Ji, Ming-chang; Zhy, Wen-tao; Yan, Han-jing

2015-03-01

Growth suitability as assessment indicators for medicinal plants cultivation was proposed based on chemical quality determination and ecological factors analysis by Maxent and ArcGIS model. Notopterygium incisum, an endangered Chinese medicinal plant, was analyzed as a case, its potential distribution areas at different suitability grade and regionalization map were formulated based on growth suitability theory. The results showed that the most suitable habitats is Sichuan province, and more than 60% of the most suitable areawas located in the western Sichuan such as Aba and Ganzi prefectures for N. incisum. The results indicated that habitat altitude, average air temperature in September, and vegetation types were the dominant factors contributing to the grade of plant growth, precipitation and slope were the major factors contributing to notopterol accumulation in its underground parts, while isoimperatorin in its underground parts was negatively corelated with precipitation and slope of its habitat. However, slope as a factor influencing chemical components seemed to be a pseudo corelationship. Therefore, there were distinguishing differences between growth suitability and quality suitability for medicinal plants, which was helpful to further research and practice of cultivation regionalization, wild resource monitoring and large-scale cultivation of traditional Chinese medicine plants.

40 CFR 80.1645 - Sample retention requirements for producers and importers of denaturant designated as suitable...

Code of Federal Regulations, 2014 CFR

2014-07-01

... producers and importers of denaturant designated as suitable for the manufacture of denatured fuel ethanol... suitable for the manufacture of denatured fuel ethanol meeting federal quality requirements. Beginning January 1, 2017, or on the first day that any producer or importer of ethanol denaturant designates a...

Influence of Wheat-Milled Products and Their Additive Blends on Pasta Dough Rheological, Microstructure, and Product Quality Characteristics

PubMed Central

Dhiraj, B.; Prabhasankar, P.

2013-01-01

This study is aimed to assess the suitability of T. aestivum wheat milled products and its combinations with T. durum semolina with additives such as ascorbic acid, vital gluten and HPMC (Hydroxypropyl methyl cellulose) for pasta processing quality characteristics such as pasta dough rheology, microstructure, cooking quality, and sensory evaluation. Rheological studies showed maximum dough stability in Comb1 (T. aestivum wheat flour and semolina). Colour and cooking quality of Comb2 (T. durum semolina and T. aestivum wheat flour) and Comb3 (T. aestivum wheat semolina and T. durum semolina) were comparable with control. Pasting results indicated that T. aestivum semolina gave the lowest onset gelatinization temperature (66.9°C) but the highest peak viscosity (1.053 BU). Starch release was maximum in Comb1 (53.45%) when compared with control (44.9%) as also proved by microstructure studies. Firmness was seen to be slightly high in Comb3 (2.430 N) when compared with control (2.304 N), and sensory evaluations were also in the acceptable range for the same. The present study concludes that Comb3 comprising 50% T. durum semolina and 50% T. aestivum refined wheat flour with additives would be optimal alternate for 100% T. durum semolina for production of financially viable pasta. PMID:26904601

AmO 2 Analysis for Analytical Method Testing and Assessment: Analysis Support for AmO 2 Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhn, Kevin John; Bland, Galey Jean; Fulwyler, James Brent

Americium oxide samples will be measured for various analytes to support AmO 2 production. The key analytes that are currently requested by the Am production customer at LANL include total Am content, Am isotopics, Pu assay, Pu isotopics, and trace element content including 237Np content. Multiple analytical methods will be utilized depending on the sensitivity, accuracy and precision needs of the Am matrix. Traceability to the National Institute of Standards and Technology (NIST) will be achieved, where applicable, by running NIST traceable quality control materials. This given that there are no suitable AmO 2 reference materials currently available for requestedmore » analytes. The primary objective is to demonstrate the suitability of actinide analytical chemistry methods to support AmO 2 production operations.« less

Deciphering groundwater quality for irrigation and domestic purposes - a case study in Suri I and II blocks, Birbhum District, West Bengal, India

NASA Astrophysics Data System (ADS)

Das, Shreya; Nag, S. K.

2015-07-01

Assessment of the hydrochemical characteristics of water and aquifer hydraulic properties is important for groundwater planning and management in the study area. It is not only the basic need for human existence but also a vital input for all development activities. The present hydro-geochemical study of groundwater samples from the Suri I and II blocks of Birbhum district, West Bengal (23.76 ∘-23.99 ∘N; 87.42 ∘-87.64 ∘E) was carried out to assess their suitability for agricultural, domestic and drinking purposes. For this study, samples were collected from 26 locations during the post-monsoon and pre-monsoon sessions spanning over 2012 and 2013. Groundwater samples were analyzed for their physical and chemical properties using standard laboratory methods. Physical and chemical parameters of groundwater such as pH, electrical conductivity, total dissolved solids, Na, K, Ca, Mg, Fe, Cl, HCO3, SO4 and F were determined. Various water quality indices like SAR, SSP, PI, RSC, MAR and KR have been calculated for each water sample to identify the irrigational suitability standard. According to most of these parameters, the groundwater has been found to be well to moderately suitable for irrigation. In the post-monsoon session exceptionally high RSC values for around 80% samples indicate an alkaline hazard to the soil. The ion balance histogram for post-monsoon indicates undesirable ion balance values according to fresh water standards whereas in pre-monsoon, the samples show good ion balance in water. For determination of the drinking suitability standard of groundwater, three parameters have been considered - total hardness (TH), Piper's trilinear diagram and water quality index study. Groundwater of the present study area has been found to be moderately-hard to hard during both sampling sessions and hence poses no health risk which could arise due to excess consumption of calcium or magnesium. Hydrogeochemical facies in the form of Piper's trilinear diagram plot which helps in identification of the water `type' which can render a particular taste or odour to water, indicates that groundwater in the study area is majorly of CaMgHCO 3 and NaHCO 3 type (fresh type) during both post-monsoon and pre-monsoon sessions barring a couple of samples which are of CaMgSO 4/CaMgClSO 4 type in pre-monsoon. Water quality index study reveals that close to 90% of the water samples are suitable for drinking during post-monsoon compared to pre-monsoon during which period only 60% of water samples fall under the suitable drinking water category. Gibbs' diagrams, which help in identification of natural processes controlling hydrogeochemistry of groundwater indicates that for both post-monsoon and pre-monsoon sessions, the overall hydrogeochemistry of the study area is dominated by rock-water interaction processes.

Suitability of ultra-high performance liquid chromatography for the determination of fat-soluble nutritional status (vitamins A, E, D, and individual carotenoids).

PubMed

Granado-Lorencio, F; Herrero-Barbudo, C; Blanco-Navarro, I; Pérez-Sacristán, B

2010-06-01

Our aim was to assess the suitability of ultra-high performance liquid chromatography (UHPLC) for the simultaneous determination of biomarkers of vitamins A (retinol, retinyl esters), E (alpha- and gamma-tocopherol), D (25-OH-vitamin D), and the major carotenoids in human serum to be used in clinical practice. UHPLC analysis was performed on HSS T3 column (2.1 x 100 mm; 1.8 microm) using gradient elution and UV-VIS detection. The system allows the simultaneous determination of retinol, retinyl palmitate, 25-OH-vitamin D, alpha- and gamma-tocopherol, lutein plus zeaxanthin, alpha-carotene, beta-carotene, alpha- and beta-cryptoxanthin and lycopene. The method showed a good linearity over the physiological range with an adequate accuracy in samples from quality control programs. Suitability of the method in clinical practice was tested by analyzing samples (n = 286) from patients. In conclusion, UHPLC constitutes a reliable approach for nutrient/biomarker profiling allowing the rapid, simultaneous and low-cost determination of vitamins A, E, and D (including vitamers and ester forms) and the major carotenoids in clinical practice.

Accessing groundwater quality in lower part of Nagapattinam district, Southern India: using hydrogeochemistry and GIS interpolation techniques

NASA Astrophysics Data System (ADS)

Gnanachandrasamy, G.; Ramkumar, T.; Venkatramanan, S.; Vasudevan, S.; Chung, S. Y.; Bagyaraj, M.

2015-03-01

The aim of this present study was to evaluate groundwater quality in the lower part of Nagapattinam district, Tamil Nadu, Southern India. A detailed geochemical study of groundwater region is described, and the origin of the chemical composition of groundwater has been qualitatively evaluated, using observations over a period of two seasons premonsoon (June) and monsoon (November) in the year of 2010. To attempt this goal, samples were analysed for various physico-chemical parameters such as temperature, pH, salinity, Na+, Ca2+, K+, Mg2+, Cl-, HCO3 - and SO4 2-. The abundance of major cations concentration in groundwater is as Na > Ca > Mg > K, while that of anions is Cl > SO4 > HCO3. The Piper trilinear diagram indicates Ca-Cl2 facies, and according to USSL diagram, most of the sample exhibits high salinity hazard (C3S1) type in both seasons. It indicates that high salinity (C3) and low sodium (S1) are moderately suitable for irrigation purposes. Gibbs boomerang exhibits most of the samples mainly controlled by evaporation and weathering process sector in both seasons. Irrigation status of the groundwater samples indicates that it was moderately suitable for agricultural purpose. ArcGIS 9.3 software was used for the generation of various thematic maps and the final groundwater quality map. An interpolation technique inverse distance weighting was used to obtain the spatial distribution of groundwater quality parameters. The final map classified the ground quality in the study area. The results of this research show that the development of the management strategies for the aquifer system is vitally necessary.

Rhythm vs. rate control of atrial fibrillation meta-analysed by number needed to treat.

PubMed

Kumana, Cyrus R; Cheung, Bernard M Y; Cheung, Giselle T Y; Ovedal, Tori; Pederson, Bjorn; Lauder, Ian J

2005-10-01

Whenever feasible, rhythm control of atrial fibrillation (AF) was generally preferred over rate control, in the belief that it offered better symptomatic relief and quality of life, and eliminated the need for anticoagulation. However, recent trials appear to challenge these assumptions. To explore the desirability of rhythm vs. rate control of AF by systematic review of pertinent, published, randomized controlled trials (RCTs) and a meta-analysis by number needed to treat (NNT) year(-1), with respect to diverse clinically important outcomes. RCTs of outcome primarily comparing rate vs. rhythm control in patients with spontaneous AF were identified. For each outcome and assuming rhythm control to be the active treatment, relative risk reduction (RRR) and NNT year(-1) were derived for individual trials together with an NNT year(-1) for all trials combined; corresponding 95% confidence intervals (CI) were also calculated. Adverse drug reaction (ADR) and quality of life reporting were also assessed. In all, data from five suitable RCTs (entailing 5239 patients) were analysed. For hospitalization, available RRRs and NNT year(-1) values were all clinically and statistically significant. Overall, one additional patient was hospitalized for every 35 assigned to rhythm control (95% CI 27, 48). For the endpoints of death, 'ischaemic' stroke and 'non-CNS' bleeding, there was no significant difference. ADRs were significantly more common in rhythm control patients, whereas quality of life assessments revealed no difference. Thromboembolism was associated with cessation of or subtherapeutic anticoagulation, irrespective of treatment assignment. Reduced risk of hospitalization and non-inferiority for other endpoints all favour rate control, the less costly strategy. If symptoms of AF are not a problem, treatment should target optimizing rate control and more widespread and effective prophylactic anticoagulation.

Neural Flight Control System

NASA Technical Reports Server (NTRS)

Gundy-Burlet, Karen

2003-01-01

The Neural Flight Control System (NFCS) was developed to address the need for control systems that can be produced and tested at lower cost, easily adapted to prototype vehicles and for flight systems that can accommodate damaged control surfaces or changes to aircraft stability and control characteristics resulting from failures or accidents. NFCS utilizes on a neural network-based flight control algorithm which automatically compensates for a broad spectrum of unanticipated damage or failures of an aircraft in flight. Pilot stick and rudder pedal inputs are fed into a reference model which produces pitch, roll and yaw rate commands. The reference model frequencies and gains can be set to provide handling quality characteristics suitable for the aircraft of interest. The rate commands are used in conjunction with estimates of the aircraft s stability and control (S&C) derivatives by a simplified Dynamic Inverse controller to produce virtual elevator, aileron and rudder commands. These virtual surface deflection commands are optimally distributed across the aircraft s available control surfaces using linear programming theory. Sensor data is compared with the reference model rate commands to produce an error signal. A Proportional/Integral (PI) error controller "winds up" on the error signal and adds an augmented command to the reference model output with the effect of zeroing the error signal. In order to provide more consistent handling qualities for the pilot, neural networks learn the behavior of the error controller and add in the augmented command before the integrator winds up. In the case of damage sufficient to affect the handling qualities of the aircraft, an Adaptive Critic is utilized to reduce the reference model frequencies and gains to stay within a flyable envelope of the aircraft.

Isotope Inversion Experiment evaluating the suitability of calibration in surrogate matrix for quantification via LC-MS/MS-Exemplary application for a steroid multi-method.

PubMed

Suhr, Anna Catharina; Vogeser, Michael; Grimm, Stefanie H

2016-05-30

For quotable quantitative analysis of endogenous analytes in complex biological samples by isotope dilution LC-MS/MS, the creation of appropriate calibrators is a challenge, since analyte-free authentic material is in general not available. Thus, surrogate matrices are often used to prepare calibrators and controls. However, currently employed validation protocols do not include specific experiments to verify the suitability of a surrogate matrix calibration for quantification of authentic matrix samples. The aim of the study was the development of a novel validation experiment to test whether surrogate matrix based calibrators enable correct quantification of authentic matrix samples. The key element of the novel validation experiment is the inversion of nonlabelled analytes and their stable isotope labelled (SIL) counterparts in respect to their functions, i.e. SIL compound is the analyte and nonlabelled substance is employed as internal standard. As a consequence, both surrogate and authentic matrix are analyte-free regarding SIL analytes, which allows a comparison of both matrices. We called this approach Isotope Inversion Experiment. As figure of merit we defined the accuracy of inverse quality controls in authentic matrix quantified by means of a surrogate matrix calibration curve. As a proof-of-concept application a LC-MS/MS assay addressing six corticosteroids (cortisol, cortisone, corticosterone, 11-deoxycortisol, 11-deoxycorticosterone, and 17-OH-progesterone) was chosen. The integration of the Isotope Inversion Experiment in the validation protocol for the steroid assay was successfully realized. The accuracy results of the inverse quality controls were all in all very satisfying. As a consequence the suitability of a surrogate matrix calibration for quantification of the targeted steroids in human serum as authentic matrix could be successfully demonstrated. The Isotope Inversion Experiment fills a gap in the validation process for LC-MS/MS assays quantifying endogenous analytes. We consider it a valuable and convenient tool to evaluate the correct quantification of authentic matrix samples based on a calibration curve in surrogate matrix. Copyright © 2016 Elsevier B.V. All rights reserved.

Halogenated peptides as internal standards (H-PINS): introduction of an MS-based internal standard set for liquid chromatography-mass spectrometry.

PubMed

Mirzaei, Hamid; Brusniak, Mi-Youn; Mueller, Lukas N; Letarte, Simon; Watts, Julian D; Aebersold, Ruedi

2009-08-01

As the application for quantitative proteomics in the life sciences has grown in recent years, so has the need for more robust and generally applicable methods for quality control and calibration. The reliability of quantitative proteomics is tightly linked to the reproducibility and stability of the analytical platforms, which are typically multicomponent (e.g. sample preparation, multistep separations, and mass spectrometry) with individual components contributing unequally to the overall system reproducibility. Variations in quantitative accuracy are thus inevitable, and quality control and calibration become essential for the assessment of the quality of the analyses themselves. Toward this end, the use of internal standards cannot only assist in the detection and removal of outlier data acquired by an irreproducible system (quality control) but can also be used for detection of changes in instruments for their subsequent performance and calibration. Here we introduce a set of halogenated peptides as internal standards. The peptides are custom designed to have properties suitable for various quality control assessments, data calibration, and normalization processes. The unique isotope distribution of halogenated peptides makes their mass spectral detection easy and unambiguous when spiked into complex peptide mixtures. In addition, they were designed to elute sequentially over an entire aqueous to organic LC gradient and to have m/z values within the commonly scanned mass range (300-1800 Da). In a series of experiments in which these peptides were spiked into an enriched N-glycosite peptide fraction (i.e. from formerly N-glycosylated intact proteins in their deglycosylated form) isolated from human plasma, we show the utility and performance of these halogenated peptides for sample preparation and LC injection quality control as well as for retention time and mass calibration. Further use of the peptides for signal intensity normalization and retention time synchronization for selected reaction monitoring experiments is also demonstrated.

Halogenated Peptides as Internal Standards (H-PINS)

PubMed Central

Mirzaei, Hamid; Brusniak, Mi-Youn; Mueller, Lukas N.; Letarte, Simon; Watts, Julian D.; Aebersold, Ruedi

2009-01-01

As the application for quantitative proteomics in the life sciences has grown in recent years, so has the need for more robust and generally applicable methods for quality control and calibration. The reliability of quantitative proteomics is tightly linked to the reproducibility and stability of the analytical platforms, which are typically multicomponent (e.g. sample preparation, multistep separations, and mass spectrometry) with individual components contributing unequally to the overall system reproducibility. Variations in quantitative accuracy are thus inevitable, and quality control and calibration become essential for the assessment of the quality of the analyses themselves. Toward this end, the use of internal standards cannot only assist in the detection and removal of outlier data acquired by an irreproducible system (quality control) but can also be used for detection of changes in instruments for their subsequent performance and calibration. Here we introduce a set of halogenated peptides as internal standards. The peptides are custom designed to have properties suitable for various quality control assessments, data calibration, and normalization processes. The unique isotope distribution of halogenated peptides makes their mass spectral detection easy and unambiguous when spiked into complex peptide mixtures. In addition, they were designed to elute sequentially over an entire aqueous to organic LC gradient and to have m/z values within the commonly scanned mass range (300–1800 Da). In a series of experiments in which these peptides were spiked into an enriched N-glycosite peptide fraction (i.e. from formerly N-glycosylated intact proteins in their deglycosylated form) isolated from human plasma, we show the utility and performance of these halogenated peptides for sample preparation and LC injection quality control as well as for retention time and mass calibration. Further use of the peptides for signal intensity normalization and retention time synchronization for selected reaction monitoring experiments is also demonstrated. PMID:19411281

Speech coding at 4800 bps for mobile satellite communications

NASA Technical Reports Server (NTRS)

Gersho, Allen; Chan, Wai-Yip; Davidson, Grant; Chen, Juin-Hwey; Yong, Mei

1988-01-01

A speech compression project has recently been completed to develop a speech coding algorithm suitable for operation in a mobile satellite environment aimed at providing telephone quality natural speech at 4.8 kbps. The work has resulted in two alternative techniques which achieve reasonably good communications quality at 4.8 kbps while tolerating vehicle noise and rather severe channel impairments. The algorithms are embodied in a compact self-contained prototype consisting of two AT and T 32-bit floating-point DSP32 digital signal processors (DSP). A Motorola 68HC11 microcomputer chip serves as the board controller and interface handler. On a wirewrapped card, the prototype's circuit footprint amounts to only 200 sq cm, and consumes about 9 watts of power.

Rigid Body Rate Inference from Attitude Variation

NASA Technical Reports Server (NTRS)

Bar-Itzhack, I. Y.; Harman, Richard R.; Thienel, Julie K.

2006-01-01

In this paper we research the extraction of the angular rate vector from attitude information without differentiation, in particular from quaternion measurements. We show that instead of using a Kalman filter of some kind, it is possible to obtain good rate estimates, suitable for spacecraft attitude control loop damping, using simple feedback loops, thereby eliminating the need for recurrent covariance computation performed when a Kalman filter is used. This considerably simplifies the computations required for rate estimation in gyro-less spacecraft. Some interesting qualities of the Kalman filter gain are explored, proven and utilized. We examine two kinds of feedback loops, one with varying gain that is proportional to the well known Q matrix, which is computed using the measured quaternion, and the other type of feedback loop is one with constant coefficients. The latter type includes two kinds; namely, a proportional feedback loop, and a proportional-integral feedback loop. The various schemes are examined through simulations and their performance is compared. It is shown that all schemes are adequate for extracting the angular velocity at an accuracy suitable for control loop damping.

On the Extraction of Angular Velocity from Attitude Measurements

NASA Technical Reports Server (NTRS)

Bar-Itzhack, I. Y.; Harman, Richard R.; Thienel, Julie K.

2006-01-01

In this paper we research the extraction of the angular rate vector from attitude information without differentiation, in particular from quaternion measurements. We show that instead of using a Kalman filter of some kind, it is possible to obtain good rate estimates, suitable for spacecraft attitude control loop damping, using simple feedback loops, thereby eliminating the need for recurrent covariance computation performed when a Kalman filter is used. This considerably simplifies the computations required for rate estimation in gyro-less spacecraft. Some interesting qualities of the Kalman filter gain are explored, proven and utilized. We examine two kinds of feedback loops, one with varying gain that is proportional to the well known Q matrix, which is computed using the measured quaternion, and the other type of feedback loop is one with constant coefficients. The latter type includes two kinds; namely, a proportional feedback loop, and a proportional-integral feedback loop. The various schemes are examined through simulations and their performance is compared. It is shown that all schemes are adequate for extracting the angular velocity at an accuracy suitable for control loop damping.

POTENTIAL EFFECTS OF WHOLE-BODY VIBRATION EXERCISES ON BLOOD FLOW KINETICS OF DIFFERENT POPULATIONS: A SYSTEMATIC REVIEW WITH A SUITABLE APPROACH.

PubMed

Sá-Caputo, Danúbia; Paineiras-Domingos, Laisa; Carvalho-Lima, Rafaelle; Dias-Costa, Glenda; de Paiva, Patrícia de Castro; de Azeredo, Claudia Figueiredo; Carmo, Roberto Carlos Resende; Dionello, Carla F; Moreira-Marconi, Eloá; Frederico, Éric Heleno F F; Sousa-Gonçalves, Cintia Renata; Morel, Danielle S; Paiva, Dulciane N; Avelar, Núbia C P; Lacerda, Ana C; Magalhães, Carlos E V; Castro, Leonardo S; Presta, Giuseppe A; de Paoli, Severo; Sañudo, Borja; Bernardo-Filho, Mario

2017-01-01

The ability to control skin blood flow decreases with advancing age and some clinical disorders, as in diabetes and in rheumatologic diseases. Feasible clinical strategies such as whole-body vibration exercise (WBVE) are being used without a clear understanding of its effects. The aim of the present study is to review the effects of the WBVE on blood flow kinetics and its feasibility in different populations. The level of evidence (LE) of selected papers in PubMed and/or PEDRo databases was determined. We selected randomized, controlled trials in English to be evaluated. Six studies had LE II, one had LE III-2 and one III-3 according to the NHMRC. A great variability among the protocols was observed but also in the assessment devices; therefore, more research about this topic is warranted. Despite the limitations, it is can be concluded that the use of WBVE has proven to be a safe and useful strategy to improve blood flow. However, more studies with greater methodological quality are needed to clearly define the more suitable protocols.

Detection of low numbers of microplastics in North Sea fish using strict quality assurance criteria.

PubMed

Hermsen, Enya; Pompe, Renske; Besseling, Ellen; Koelmans, Albert A

2017-09-15

We investigated 400 individual fish of four North Sea species: Atlantic Herring, Sprat, Common Dab, and Whiting on ingestion of >20μm microplastic. Strict quality assurance criteria were followed in order to control contamination during the study. Two plastic particles were found in only 1 (a Sprat) out of 400 individuals (0.25%, with a 95% confidence interval of 0.09-1.1%). The particles were identified to consist of polymethylmethacrylate (PMMA) through FTIR spectroscopy. No contamination occurred during the study, showing the method applied to be suitable for microplastic ingestion studies in biota. We discuss the low particle count for North Sea fish with those in other studies and suggest a relation between reported particle count and degree of quality assurance applied. Microplastic ingestion by fish may be less common than thought initially, with low incidence shown in this study, and other studies adhering to strict quality assurance criteria. Copyright © 2017 Elsevier Ltd. All rights reserved.

Suitability of combination of calcium propionate and chitosan for preserving minimally processed banana quality.

PubMed

Mirshekari, Amin; Madani, Babak; Golding, John B

2017-08-01

The marketability of fresh-cut banana slices is limited by the rapid rate of fruit softening and browning. However, there is no scientific literature available about the role of postharvest calcium propionate and chitosan treatment on the quality attributes of fresh-cut banana. Therefore, the aim of the present study was to investigate these effects. The application of calcium propionate plus chitosan (CaP+Chit) retained higher firmness, higher ascorbic acid content, higher total antioxidant activity and higher total phenolic compounds, along with lower browning, lower polyphenol oxidase, lower peroxidase, lower polygalacturonase and lower pectin methyl esterase activities and microbial growth, compared to control banana slices after 5 days of cold storage. The results of the present study show that CaP+Chit could be used to slow the loss of quality at the same time as maintaining quality and inhibiting microbial loads. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Power Spectrum of a Noisy System Close to a Heteroclinic Orbit

NASA Astrophysics Data System (ADS)

Giner-Baldó, Jordi; Thomas, Peter J.; Lindner, Benjamin

2017-07-01

We consider a two-dimensional dynamical system that possesses a heteroclinic orbit connecting four saddle points. This system is not able to show self-sustained oscillations on its own. If endowed with white Gaussian noise it displays stochastic oscillations, the frequency and quality factor of which are controlled by the noise intensity. This stochastic oscillation of a nonlinear system with noise is conveniently characterized by the power spectrum of suitable observables. In this paper we explore different analytical and semianalytical ways to compute such power spectra. Besides a number of explicit expressions for the power spectrum, we find scaling relations for the frequency, spectral width, and quality factor of the stochastic heteroclinic oscillator in the limit of weak noise. In particular, the quality factor shows a slow logarithmic increase with decreasing noise of the form Q˜ [ln (1/D)]^2. Our results are compared to numerical simulations of the respective Langevin equations.

Gamma irradiation influence on storage and quality of potatoes (in Bulgarian)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vylchev, P.

1972-01-01

Gamma irradiation of three varieties potatoes, early crop, middle-early crop, and late crop, was studied. Tubers were irradiated in the autumn with 8 and 10 kR. Weight losses, starch contents, and culinary alterations were investigated. Irradiated tubers in all three varieties of potatoes did not sprout. At the end of April, weight losses of non-irradiated potatoes were 9 to 14.5%, and of irradiated, 0.5 to 4.5%. After one year of storage these losses were respectively 44 to 56% and 11 to 19%, in relation to the variety and the radiation dose. Tubers infected with Spondylocladium atrovirens Harz were not appropriatemore » for prolonged storage. In the spring substantial differences were not established in the quality of controls and irradiated tubers. After one year storage of irradiated tubers proved to be with lower quality characteristics in comparisons to new crop, but were nevertheless suitable for consumption. (auth)« less

Quality control for quantitative PCR based on amplification compatibility test.

PubMed

Tichopad, Ales; Bar, Tzachi; Pecen, Ladislav; Kitchen, Robert R; Kubista, Mikael; Pfaffl, Michael W

2010-04-01

Quantitative qPCR is a routinely used method for the accurate quantification of nucleic acids. Yet it may generate erroneous results if the amplification process is obscured by inhibition or generation of aberrant side-products such as primer dimers. Several methods have been established to control for pre-processing performance that rely on the introduction of a co-amplified reference sequence, however there is currently no method to allow for reliable control of the amplification process without directly modifying the sample mix. Herein we present a statistical approach based on multivariate analysis of the amplification response data generated in real-time. The amplification trajectory in its most resolved and dynamic phase is fitted with a suitable model. Two parameters of this model, related to amplification efficiency, are then used for calculation of the Z-score statistics. Each studied sample is compared to a predefined reference set of reactions, typically calibration reactions. A probabilistic decision for each individual Z-score is then used to identify the majority of inhibited reactions in our experiments. We compare this approach to univariate methods using only the sample specific amplification efficiency as reporter of the compatibility. We demonstrate improved identification performance using the multivariate approach compared to the univariate approach. Finally we stress that the performance of the amplification compatibility test as a quality control procedure depends on the quality of the reference set. Copyright 2010 Elsevier Inc. All rights reserved.

Benefits and Limitations of DNA Barcoding and Metabarcoding in Herbal Product Authentication

PubMed Central

Raclariu, Ancuta Cristina; Heinrich, Michael; Ichim, Mihael Cristin

2017-01-01

Abstract Introduction Herbal medicines play an important role globally in the health care sector and in industrialised countries they are often considered as an alternative to mono‐substance medicines. Current quality and authentication assessment methods rely mainly on morphology and analytical phytochemistry‐based methods detailed in pharmacopoeias. Herbal products however are often highly processed with numerous ingredients, and even if these analytical methods are accurate for quality control of specific lead or marker compounds, they are of limited suitability for the authentication of biological ingredients. Objective To review the benefits and limitations of DNA barcoding and metabarcoding in complementing current herbal product authentication. Method Recent literature relating to DNA based authentication of medicinal plants, herbal medicines and products are summarised to provide a basic understanding of how DNA barcoding and metabarcoding can be applied to this field. Results Different methods of quality control and authentication have varying resolution and usefulness along the value chain of these products. DNA barcoding can be used for authenticating products based on single herbal ingredients and DNA metabarcoding for assessment of species diversity in processed products, and both methods should be used in combination with appropriate hyphenated chemical methods for quality control. Conclusions DNA barcoding and metabarcoding have potential in the context of quality control of both well and poorly regulated supply systems. Standardisation of protocols for DNA barcoding and DNA sequence‐based identification are necessary before DNA‐based biological methods can be implemented as routine analytical approaches and approved by the competent authorities for use in regulated procedures. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd. PMID:28906059

Benefits and Limitations of DNA Barcoding and Metabarcoding in Herbal Product Authentication.

PubMed

Raclariu, Ancuta Cristina; Heinrich, Michael; Ichim, Mihael Cristin; de Boer, Hugo

2018-03-01

Herbal medicines play an important role globally in the health care sector and in industrialised countries they are often considered as an alternative to mono-substance medicines. Current quality and authentication assessment methods rely mainly on morphology and analytical phytochemistry-based methods detailed in pharmacopoeias. Herbal products however are often highly processed with numerous ingredients, and even if these analytical methods are accurate for quality control of specific lead or marker compounds, they are of limited suitability for the authentication of biological ingredients. To review the benefits and limitations of DNA barcoding and metabarcoding in complementing current herbal product authentication. Recent literature relating to DNA based authentication of medicinal plants, herbal medicines and products are summarised to provide a basic understanding of how DNA barcoding and metabarcoding can be applied to this field. Different methods of quality control and authentication have varying resolution and usefulness along the value chain of these products. DNA barcoding can be used for authenticating products based on single herbal ingredients and DNA metabarcoding for assessment of species diversity in processed products, and both methods should be used in combination with appropriate hyphenated chemical methods for quality control. DNA barcoding and metabarcoding have potential in the context of quality control of both well and poorly regulated supply systems. Standardisation of protocols for DNA barcoding and DNA sequence-based identification are necessary before DNA-based biological methods can be implemented as routine analytical approaches and approved by the competent authorities for use in regulated procedures. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd. © 2017 The Authors. Phytochemical Analysis Published by John Wiley & Sons Ltd.

A conceptual framework for evaluating data suitability for observational studies.

PubMed

Shang, Ning; Weng, Chunhua; Hripcsak, George

2017-09-08

To contribute a conceptual framework for evaluating data suitability to satisfy the research needs of observational studies. Suitability considerations were derived from a systematic literature review on researchers' common data needs in observational studies and a scoping review on frequent clinical database design considerations, and were harmonized to construct a suitability conceptual framework using a bottom-up approach. The relationships among the suitability categories are explored from the perspective of 4 facets of data: intrinsic, contextual, representational, and accessible. A web-based national survey of domain experts was conducted to validate the framework. Data suitability for observational studies hinges on the following key categories: Explicitness of Policy and Data Governance, Relevance, Availability of Descriptive Metadata and Provenance Documentation, Usability, and Quality. We describe 16 measures and 33 sub-measures. The survey uncovered the relevance of all categories, with a 5-point Likert importance score of 3.9 ± 1.0 for Explicitness of Policy and Data Governance, 4.1 ± 1.0 for Relevance, 3.9 ± 0.9 for Availability of Descriptive Metadata and Provenance Documentation, 4.2 ± 1.0 for Usability, and 4.0 ± 0.9 for Quality. The suitability framework evaluates a clinical data source's fitness for research use. Its construction reflects both researchers' points of view and data custodians' design features. The feedback from domain experts rated Usability, Relevance, and Quality categories as the most important considerations. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Collaborative study for the validation of alternative in vitro potency assays for human tetanus immunoglobulins.

PubMed

Gross, S; Janssen, S W J; de Vries, B; Terao, E; Daas, A; Buchheit, K-H

2010-07-01

An international collaborative study to validate 2 alternative in vitro methods for the potency testing of human tetanus immunoglobulin products was organised by the European Directorate for the Quality of Medicines & HealthCare (EDQM). The study, run in the framework of the Biological Standardisation Programme (BSP) under the aegis of the European Commission and the Council of Europe, involved 21 official medicines control and industry laboratories from 15 countries. Both methods, an enzyme-linked immunoassay (EIA) and a toxoid inhibition assay (TIA), showed good reproducibility, repeatability and precision. EIA and TIA discriminated between low, medium and high potency samples. Potency estimates correlated well and both values were in close agreement with those obtained by in vivo methods. Moreover, these alternative methods allowed to resolve discrepant results between laboratories that were due to product potency loss and reporting errors. The study demonstrated that EIA and TIA are suitable quality control methods for tetanus immunoglobulin, which can be standardised in a control laboratory using a quality assurance system. Consequently, the Group of Experts on Human Blood and Blood Products of the European Pharmacopoeia revised the monograph on human tetanus immunoglobulins to include both the methods as compendial alternatives to the in vivo mouse challenge assay. 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

Nanoparticle Enhancement Cascade for Sensitive Multiplex Measurements of Biomarkers in Complex Fluids with Surface Plasmon Resonance Imaging.

PubMed

Hendriks, Jan; Stojanovic, Ivan; Schasfoort, Richard B M; Saris, Daniël B F; Karperien, Marcel

2018-06-05

There is a large unmet need for reliable biomarker measurement systems for clinical application. Such systems should meet challenging requirements for large scale use, including a large dynamic detection range, multiplexing capacity, and both high specificity and sensitivity. More importantly, these requirements need to apply to complex biological samples, which require extensive quality control. In this paper, we present the development of an enhancement detection cascade for surface plasmon resonance imaging (SPRi). The cascade applies an antibody sandwich assay, followed by neutravidin and a gold nanoparticle enhancement for quantitative biomarker measurements in small volumes of complex fluids. We present a feasibility study both in simple buffers and in spiked equine synovial fluid with four cytokines, IL-1β, IL-6, IFN-γ, and TNF-α. Our enhancement cascade leads to an antibody dependent improvement in sensitivity up to 40 000 times, resulting in a limit of detection as low as 50 fg/mL and a dynamic detection range of more than 7 logs. Additionally, measurements at these low concentrations are highly reliable with intra- and interassay CVs between 2% and 20%. We subsequently showed this assay is suitable for multiplex measurements with good specificity and limited cross-reactivity. Moreover, we demonstrated robust detection of IL-6 and IL-1β in spiked undiluted equine synovial fluid with small variation compared to buffer controls. In addition, the availability of real time measurements provides extensive quality control opportunities, essential for clinical applications. Therefore, we consider this method is suitable for broad application in SPRi for multiplex biomarker detection in both research and clinical settings.

Assessment and modeling of groundwater quality using WQI and GIS in Upper Egypt area.

PubMed

Rabeiy, Ragab ElSayed

2017-04-04

The continuous growth and development of population need more fresh water for drinking, irrigation, and domestic in arid countries like Egypt. Evaluation the quality of groundwater is an essential study to ensure its suitability for different purposes. In this study, 812 groundwater samples were taken within the middle area of Upper Egypt (Sohag Governorate) to assess the quality of groundwater for drinking and irrigation purposes. Eleven water parameters were analyzed at each groundwater sample (Na + , K + , Ca 2+ , Mg 2+ , HCO 3 - SO 4 2- , Fe 2+ , Mn 2+ , Cl - , electrical conductivity, and pH) to exploit them in water quality evaluation. A classical statistics were applied for the raw data to examine the distribution of physicochemical parameters in the investigated area. The relationship between groundwater parameters was tested using the correlation coefficient where a strong relationship was found between several water parameters such as Ca 2+ and Cl - . Water quality index (WQI) is a mathematical model used to transform many water parameters into a single indicator value which represents the water quality level. Results of WQI showed that 20% of groundwater samples are excellent, 75% are good for drinking, and 7% are very poor water while only 1% of samples are unsuitable for drinking. To test the suitability of groundwater for irrigation, three indices are used; they are sodium adsorption ration (SAR), sodium percentage (Na%), and permeability index (PI). For irrigation suitability, the study proved that most sampling sites are suitable while less than 3% are unsuitable for irrigation. The spatial distribution of the estimated values of WQI, SAR, Na%, PI, and each groundwater parameter was spatially modeled using GIS.

Assessing Cumulative Impacts of Coal Bed Methane Development on Surface Water Quality and its Suitability for Irrigation in the Powder River Basin

NASA Astrophysics Data System (ADS)

Dawson, H. E.

2003-12-01

This paper presents a mass balance approach to assessing the cumulative impacts of discharge from Coal Bed Methane (CBM) wells on surface water quality and its suitability for irrigation in the Powder River Basin. Key water quality parameters for predicting potential effects of CBM development on irrigated agriculture are sodicity, expressed as sodium adsorption ratio (SAR) and salinity, expressed as electrical conductivity (EC). The assessment was performed with the aid of a spreadsheet model, which was designed to estimate steady-state SAR and EC at gauged stream locations after mixing with CBM produced water. Model input included ambient stream water quality and flow, CBM produced water quality and discharge rates, conveyance loss (quantity of water loss that may occur between the discharge point and the receiving streams), beneficial uses, regulatory thresholds, and discharge allocation at state-line boundaries. Historical USGS data were used to establish ambient stream water quality and flow conditions. The resultant water quality predicted for each stream station included the cumulative discharge of CBM produced water in all reaches upstream of the station. Model output was presented in both tabular and graphical formats, and indicated the suitability of pre- and post-mixing water quality for irrigation. Advantages and disadvantages of the spreadsheet model are discussed. This approach was used by federal agencies to support the development of the January 2003 Environmental Impact Statements (EIS) for the Wyoming and Montana portions of the Powder River Basin.

The importance of quality control in validating concentrations ...

EPA Pesticide Factsheets

A national-scale survey of 247 contaminants of emerging concern (CECs), including organic and inorganic chemical compounds, and microbial contaminants, was conducted in source and treated drinking water samples from 25 treatment plants across the United States. Multiple methods were used to determine these CECs, including six analytical methods to measure 174 pharmaceuticals, personal care products, and pesticides. A three-component quality assurance/quality control (QA/QC) program was designed for the subset of 174 CECs which allowed us to assess and compare performances of the methods used. The three components included: 1) a common field QA/QC protocol and sample design, 2) individual investigator-developed method-specific QA/QC protocols, and 3) a suite of 46 method comparison analytes that were determined in two or more analytical methods. Overall method performance for the 174 organic chemical CECs was assessed by comparing spiked recoveries in reagent, source, and treated water over a two-year period. In addition to the 247 CECs reported in the larger drinking water study, another 48 pharmaceutical compounds measured did not consistently meet predetermined quality standards. Methodologies that did not seem suitable for these analytes are overviewed. The need to exclude analytes based on method performance demonstrates the importance of additional QA/QC protocols. This paper compares the method performance of six analytical methods used to measure 174 emer

Effects of pilates on patients with chronic non-specific low back pain: a systematic review

PubMed Central

Lin, Hui-Ting; Hung, Wei-Ching; Hung, Jia-Ling; Wu, Pei-Shan; Liaw, Li-Jin; Chang, Jia-Hao

2016-01-01

[Purpose] To evaluate the effects of Pilates on patients with chronic low back pain through a systematic review of high-quality articles on randomized controlled trials. [Subjects and Methods] Keywords and synonyms for “Pilates” and “Chronic low back pain” were used in database searches. The databases included PubMed, Physiotherapy Evidence Database (PEDro), Medline, and the Cochrane Library. Articles involving randomized controlled trials with higher than 5 points on the PEDro scale were reviewed for suitability and inclusion. The methodological quality of the included randomized controlled trials was evaluated using the PEDro scale. Relevant information was extracted by 3 reviewers. [Results] Eight randomized controlled trial articles were included. Patients with chronic low back pain showed statistically significant improvement in pain relief and functional ability compared to patients who only performed usual or routine health care. However, other forms of exercise were similar to Pilates in the improvement of pain relief and functional capacity. [Conclusion] In patients with chronic low back pain, Pilates showed significant improvement in pain relief and functional enhancement. Other exercises showed effects similar to those of Pilates, if waist or torso movement was included and the exercises were performed for 20 cumulative hours. PMID:27821970

A rapid integrated bioactivity evaluation system based on near-infrared spectroscopy for quality control of Flos Chrysanthemi.

PubMed

Ding, Guoyu; Li, Baiqing; Han, Yanqi; Liu, Aina; Zhang, Jingru; Peng, Jiamin; Jiang, Min; Hou, Yuanyuan; Bai, Gang

2016-11-30

For quality control of herbal medicines or functional foods, integral activity evaluation has become more popular in recent studies. The majority of researchers focus on the relationship between chromatography/mass spectroscopy and bioactivity, but the connection with spectrum-activity is easily ignored. In this paper, the near infrared reflection spectra (NIRS) of Flos Chrysanthemi samples were collected as a representative spectrum technology, and corresponding anti-inflammation activities were utilized to illustrate the spectrum-activity study. HPLC/Q-TOF-MS identification and heat map clustering were used to select the quality markers (Q-marker) from five cultivars of Flos Chrysanthemi. Using boxplot analysis and the interval limits of detection (LODs) theory, six crucial markers, namely, chlorogenic acid, 3,5-dicaffeoylquinic acid, 1,5-dicaffeoylquinic acid, luteoloside, apigenin-7-O-β-d-glucoside, and luteolin-7-O-6-malonylglucoside were screened out. Then partial least squares regression (PLSR) calibration models combined with synergy interval partial least squares (siPLS) and 12 different spectral pretreatment methods were developed for the parameters optimization of these Q-markers in Flos Chrysanthemi powder. After comparing the relationship between Q-marker contents and anti-inflammation activity via three machine learning approaches and PLSR, back-propagation neural network (BP-ANN) displayed a more excellent non-linear fitting effect, as its R for new batches reached 0.89. These results indicated that the integrated NIRS and bioactive strategy was suitable for fast quality management in Flos Chrysanthemi, and also applied to other botanical food quality control. Copyright © 2016 Elsevier B.V. All rights reserved.

Evaluation of mailed pediatric buccal cytobrushes for use in a case-control study of birth defects.

PubMed

Gallagher, Margaret L; Sturchio, Cynthia; Smith, Ashley; Koontz, Deborah; Jenkins, Mary M; Honein, Margaret A; Rasmussen, Sonja A

2011-07-01

Buccal cell collection is a convenient DNA collection method; however, little attention has been given to the quality of DNA obtained from pediatric populations. The purpose of this study was to determine the effect of a modified cytobrush collection method on the yield and quality of infant buccal DNA collected as part of a population-based case-control study of birth defects. METHODS Cytobrushes were collected from infants, mothers, and fathers using a standard collection method in 1997 to 2003 and a modified protocol that allows air-drying of the cytobrushes after collection from 2003 to the present. Yield and quality of DNA from 1057 cytobrushes was assessed by quantitative PCR and short tandem repeat (STR) genotyping, respectively. RESULTS Air-dried cytobrushes from infants had higher median DNA yields (1300 ng) and STR completion rates (99.5%) than standard collection method cytobrushes (60 ng and 59.5%, respectively). A subset of DNA aliquots was genotyped for six single nucleotide polymorphisms (SNPs). Aliquots from both collection methods that passed the quality protocol (DNA concentration >1 ng/μl, and successful amplification of ≥1 STR) had high genotype completion rates (99-100%). The median DNA yield following whole genome amplification was more than twofold higher for air-dried than standard collection specimens (p < 0.001). CONCLUSION Yield and quality of buccal DNA collected from infants are improved by using a method that incorporates air-drying; however, DNA collected by both methods is suitable for genotyping if stringent quality control procedures are instituted. These findings may be helpful for future epidemiologic studies of birth defects and other adverse pediatric outcomes. Copyright © 2011 Wiley-Liss, Inc.

Monitoring Processes in Visual Search Enhanced by Professional Experience: The Case of Orange Quality-Control Workers

PubMed Central

Visalli, Antonino; Vallesi, Antonino

2018-01-01

Visual search tasks have often been used to investigate how cognitive processes change with expertise. Several studies have shown visual experts' advantages in detecting objects related to their expertise. Here, we tried to extend these findings by investigating whether professional search experience could boost top-down monitoring processes involved in visual search, independently of advantages specific to objects of expertise. To this aim, we recruited a group of quality-control workers employed in citrus farms. Given the specific features of this type of job, we expected that the extensive employment of monitoring mechanisms during orange selection could enhance these mechanisms even in search situations in which orange-related expertise is not suitable. To test this hypothesis, we compared performance of our experimental group and of a well-matched control group on a computerized visual search task. In one block the target was an orange (expertise target) while in the other block the target was a Smurfette doll (neutral target). The a priori hypothesis was to find an advantage for quality-controllers in those situations in which monitoring was especially involved, that is, when deciding the presence/absence of the target required a more extensive inspection of the search array. Results were consistent with our hypothesis. Quality-controllers were faster in those conditions that extensively required monitoring processes, specifically, the Smurfette-present and both target-absent conditions. No differences emerged in the orange-present condition, which resulted to mainly rely on bottom-up processes. These results suggest that top-down processes in visual search can be enhanced through immersive real-life experience beyond visual expertise advantages. PMID:29497392

Suitability of Commercial Transport Media for Biological Pathogens under Nonideal Conditions

PubMed Central

Hubbard, Kyle; Pellar, Gregory; Emanuel, Peter

2011-01-01

There is extensive data to support the use of commercial transport media as a stabilizer for known clinical samples; however, there is little information to support their use outside of controlled conditions specified by the manufacturer. Furthermore, there is no data to determine the suitability of said media for biological pathogens, specifically those of interest to the US military. This study evaluates commercial off-the-shelf (COTS) transport media based on sample recovery, viability, and quality of nucleic acids and peptides for nonpathogenic strains of Bacillus anthracis, Yersinia pestis, and Venezuelan equine encephalitis virus, in addition to ricin toxin. Samples were stored in COTS, PBST, or no media at various temperatures over an extended test period. The results demonstrate that COTS media, although sufficient for the preservation of nucleic acid and proteinaceous material, are not capable of maintaining an accurate representation of biothreat agents at the time of collection. PMID:22121364

Identifying suitable substrates for high-quality graphene-based heterostructures

NASA Astrophysics Data System (ADS)

Banszerus, L.; Janssen, H.; Otto, M.; Epping, A.; Taniguchi, T.; Watanabe, K.; Beschoten, B.; Neumaier, D.; Stampfer, C.

2017-06-01

We report on a scanning confocal Raman spectroscopy study investigating the strain-uniformity and the overall strain and doping of high-quality chemical vapour deposited (CVD) graphene-based heterostuctures on a large number of different substrate materials, including hexagonal boron nitride (hBN), transition metal dichalcogenides, silicon, different oxides and nitrides, as well as polymers. By applying a hBN-assisted, contamination free, dry transfer process for CVD graphene, high-quality heterostructures with low doping densities and low strain variations are assembled. The Raman spectra of these pristine heterostructures are sensitive to substrate-induced doping and strain variations and are thus used to probe the suitability of the substrate material for potential high-quality graphene devices. We find that the flatness of the substrate material is a key figure for gaining, or preserving high-quality graphene.

Planar regions of GaAs (001) prepared by Ga droplet motion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Changxi, E-mail: changxi.zheng@monash.edu; Tang, Wen-Xin; Jesson, David E., E-mail: jessonDE@cardiff.ac.uk

2016-07-15

The authors describe a simple method for obtaining planar regions of GaAs (001) suitable for surface science studies. The technique, which requires no buffer layer growth, atomic hydrogen source, or the introduction of As flux, employs controllable Ga droplet motion to create planar trail regions during Langmuir evaporation. Low-energy electron microscopy/diffraction techniques are applied to monitor the droplet motion and characterize the morphology and the surface reconstruction. It is found that the planar regions exhibit atomic flatness at the level of a high-quality buffer layer.

Quality of Life and Physical Capacity of Alder Ambulatory Adults with Rate-Controlled Atrial Fibrillation.

DTIC Science & Technology

1998-06-19

Morgan M. The SF-36 health survey questionnaire: Is it suitable for use with older adults ? Age and Ageing 24:120-125, 1995 35. Weinberger M, Nagle B...importance in older adults of Western societies. Over the age of 60, AF has a prevalence of 2-4%.L AF may affect as many as 16% of men and 12.2% of women...physical activity in older adult populations. TABLE 3 SHORT FORM HEALTH SURVEY (SF-3 6) INTERPRETATION 41 Low score High score 3 Physical

Quality improvement in home life based on EEG signal

NASA Astrophysics Data System (ADS)

Wang, Xiaolong; Wu, Shan; Wang, Sen; Liang, Jinhu

2017-06-01

The purpose of this research is based on the EEG and environmental signals, which are collected by different sensors and uploaded to the same server wirelessly. On the one hand, it is convenient for the data storage and data calls at any time; on the other hand, the system can provide a health advice with adjusting to the environment spontaneously, or to use EEG for the control part of the electrical equipment. The people, objects, and the environment will be organically combined to create a more comfortable, more suitable environment for their living.

Study the Effect of SiO2 Based Flux on Dilution in Submerged Arc Welding

NASA Astrophysics Data System (ADS)

kumar, Aditya; Maheshwari, Sachin

2017-08-01

This paper highlights the method for prediction of dilution in submerged arc welding (SAW). The most important factors of weld bead geometry are governed by the weld dilution which controls the chemical and mechanical properties. Submerged arc welding process is used generally due to its very easy control of process variables, good penetration, high weld quality, and smooth finish. Machining parameters, with suitable weld quality can be achieved with the different composition of the flux in the weld. In the present study Si02-Al2O3-CaO flux system was used. In SiO2 based flux NiO, MnO, MgO were mixed in various proportions. The paper investigates the relationship between the process parameters like voltage, % of flux constituents and dilution with the help of Taguchi’s method. The experiments were designed according to Taguchi L9 orthogonal array, while varying the voltage at two different levels in addition to alloying elements. Then the optimal results conditions were verified by confirmatory experiments.

NONDESTRUCTIVE QUALITY CONTROL: SOME SPECIAL METHODS OF IRRADIATION TESTING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van der Klis, T.

1961-06-10

S>Various methods, using open radioactive sources are discussed. In one method, oil is used containing Pd/sup 109/ which is adsorbed by Mg compounds with which the object to be tested is covered after it has been enveloped in a photographic film. Another method consists of coking the material in the radioactive oil and then scanning it with a suitable detector. A third method, applied especially to porous materials, uses pressure to promote the penetration of the radioactive oil into the cracks and fissures. The filtered particle technique is also used for detection of cracks or cavities in porous materials, suchmore » as ceramics, cement, graphite pressed powdered metals, and sintered carbides. In this method, radioactive liquids are used along with fluid fluorescent substances. Finally, a method is mentioned in which radioactive powder is made to adhere to the surface of the investigated objects by means of an electrostatic charge. This method is used for quality control of china, glass, email, and electric insulation material. (OID)« less

Medical Image Processing Server applied to Quality Control of Nuclear Medicine.

NASA Astrophysics Data System (ADS)

Vergara, C.; Graffigna, J. P.; Marino, E.; Omati, S.; Holleywell, P.

2016-04-01

This paper is framed within the area of medical image processing and aims to present the process of installation, configuration and implementation of a processing server of medical images (MIPS) in the Fundación Escuela de Medicina Nuclear located in Mendoza, Argentina (FUESMEN). It has been developed in the Gabinete de Tecnologia Médica (GA.TE.ME), Facultad de Ingeniería-Universidad Nacional de San Juan. MIPS is a software that using the DICOM standard, can receive medical imaging studies of different modalities or viewing stations, then it executes algorithms and finally returns the results to other devices. To achieve the objectives previously mentioned, preliminary tests were conducted in the laboratory. More over, tools were remotely installed in clinical enviroment. The appropiate protocols for setting up and using them in different services were established once defined those suitable algorithms. Finally, it’s important to focus on the implementation and training that is provided in FUESMEN, using nuclear medicine quality control processes. Results on implementation are exposed in this work.

Use of pure glycerol in fattening heavy pigs.

PubMed

Della Casa, G; Bochicchio, D; Faeti, V; Marchetto, G; Poletti, E; Rossi, A; Garavaldi, A; Panciroli, A; Brogna, N

2009-01-01

Eighty Italian Duroc×Italian Large White pigs (BW 42.6±3.37kg) were used to determine the effects of pure glycerol on growth performance and meat quality of heavy pigs. Pigs were divided into five groups receiving 0% (control), 5% or 10% during the growing and finishing phases (42.6-160kg BW) (G+F5,G+F10) or 5% or 10% during the finishing period (100-160kg BW) (FIN5,FIN10) of pure glycerol in substitution for maize meal (on a dry matter basis). The pigs were slaughtered at approximately 160kg BW. The growth performance of pigs fed 5% glycerol did not differ from controls regardless of feeding duration, whereas those fed 10% glycerol showed reduced growth and poorer feed:gain ratio. Fat quality and meat suitability for raw ham curing were not affected by dietary treatment. Differences were not consistent enough to draw any conclusion about the effects of feeding glycerol on sensory characteristics.

Predictions of potential geographical distribution and quality of Schisandra sphenanthera under climate change

PubMed Central

Guo, Yanlong; Lu, Chunyan; Gao, Bei

2016-01-01

Climate change will significantly affect plant distribution as well as the quality of medicinal plants. Although numerous studies have analyzed the effect of climate change on future habitats of plants through species distribution models (SDMs), few of them have incorporated the change of effective content of medicinal plants. Schisandra sphenanthera Rehd. et Wils. is an endangered traditional Chinese medical plant which is mainly located in the Qinling Mountains. Combining fuzzy theory and a maximum entropy model, we obtained current spatial distribution of quality assessment for S. spenanthera. Moreover, the future quality and distribution of S. spenanthera were also projected for the periods 2020s, 2050s and 2080s under three different climate change scenarios (SRES-A1B, SRES-A2 and SRES-B1 emission scenarios) described in the Special Report on Emissions Scenarios (SRES) of IPCC (Intergovernmental Panel on Climate Change). The results showed that the moderately suitable habitat of S. sphenanthera under all climate change scenarios remained relatively stable in the study area. The highly suitable habitat of S. sphenanthera would gradually decrease in the future and a higher decline rate of the highly suitable habitat area would occur under climate change scenarios SRES-A1B and SRES-A2. The result suggested that in the study area, there would be no more highly suitable habitat areas for S. sphenanthera when the annual mean temperature exceeds 20 °C or its annual precipitation exceeds 1,200 mm. Our results will be influential in the future ecological conservation and management of S. sphenanthera and can be taken as a reference for habitat suitability assessment research for other medicinal plants. PMID:27781160

Evaluating the performance of active noise control systems in commercial and industrial applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Depies, C.; Deneen, S.; Lowe, M.

1995-06-01

Active sound cancellation technology is increasingly being used to quiet commercial and industrial air-moving devices. Engineers and designers are implementing active or combination active/passive technology to control sound quality in the workplace and the acoustical environment in residential areas near industrial facilities. Sound level measurements made before and after the installation of active systems have proved that significant improvements in sound quality can be obtained even if there is little or no change in the NC/RC or dBA numbers. Noise produced by centrifugal and vane-axial fans, pumps and blowers, commonly used for ventilation and material movement in industry, are frequentlymore » dominated by high amplitude, tonal noise at low frequencies. And the low-frequency noise produced by commercial air handlers often has less tonal and more broadband characteristics, resulting in audible duct rumble noise and objectionable room spectrums. Because the A-weighting network, which is commonly used for industrial noise measurements, de-emphasizes low frequencies, its single number rating can be misleading in terms of judging the overall subjective sound quality in impacted areas and assessing the effectiveness of noise control measures. Similarly, NC values, traditionally used for commercial HVAC acoustical design criteria, can be governed by noise at any frequency and cannot accurately depict human judgment of the aural comfort level. Analyses of frequency spectrum characteristics provide the most effective means of assessing sound quality and determining mitigative measures for achieving suitable background sound levels.« less

Quality in the molecular microbiology laboratory.

PubMed

Wallace, Paul S; MacKay, William G

2013-01-01

In the clinical microbiology laboratory advances in nucleic acid detection, quantification, and sequence analysis have led to considerable improvements in the diagnosis, management, and monitoring of infectious diseases. Molecular diagnostic methods are routinely used to make clinical decisions based on when and how to treat a patient as well as monitor the effectiveness of a therapeutic regime and identify any potential drug resistant strains that may impact on the long term patient treatment program. Therefore, confidence in the reliability of the result provided by the laboratory service to the clinician is essential for patient treatment. Hence, suitable quality assurance and quality control measures are important to ensure that the laboratory methods and service meet the necessary regulatory requirements both at the national and international level. In essence, the modern clinical microbiology laboratory ensures the appropriateness of its services through a quality management system that monitors all aspects of the laboratory service pre- and post-analytical-from patient sample receipt to reporting of results, from checking and upholding staff competency within the laboratory to identifying areas for quality improvements within the service offered. For most European based clinical microbiology laboratories this means following the common International Standard Organization (ISO9001) framework and ISO15189 which sets out the quality management requirements for the medical laboratory (BS EN ISO 15189 (2003) Medical laboratories-particular requirements for quality and competence. British Standards Institute, Bristol, UK). In the United States clinical laboratories performing human diagnostic tests are regulated by the Centers for Medicare and Medicaid Services (CMS) following the requirements within the Clinical Laboratory Improvement Amendments document 1988 (CLIA-88). This chapter focuses on the key quality assurance and quality control requirements within the modern microbiology laboratory providing molecular diagnostics.

30 CFR 74.9 - Quality assurance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... specifications and are reliable, safe, effective, and otherwise suitable for their intended use. To establish and... registration under ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements... ISO Q9001-2000, American National Standard, Quality Management Systems-Requirements. The Director of...

Monitoring and modeling of microbial and biological water quality

USDA-ARS?s Scientific Manuscript database

Microbial and biological water quality informs on the health of water systems and their suitability for uses in irrigation, recreation, aquaculture, and other activities. Indicators of microbial and biological water quality demonstrate high spatial and temporal variability. Therefore, monitoring str...

Proteomics for the authentication of fish species.

PubMed

Mazzeo, Maria Fiorella; Siciliano, Rosa Anna

2016-09-16

Assessment of seafood authenticity and origin, mainly in the case of processed products (fillets, sticks, baby food) represents the crucial point to prevent fraudulent deceptions thus guaranteeing market transparency and consumers health. The most dangerous practice that jeopardies fish safety is intentional or unintentional mislabeling, originating from the substitution of valuable fish species with inferior ones. Conventional analytical methods for fish authentication are becoming inadequate to comply with the strict regulations issued by the European Union and with the increase of mislabeling due to the introduction on the market of new fish species and market globalization. This evidence prompts the development of high-throughput approaches suitable to identify unambiguous biomarkers of authenticity and screen a large number of samples with minimal time consumption. Proteomics provides suitable and powerful tools to investigate main aspects of food quality and safety and has given an important contribution in the field of biomarkers discovery applied to food authentication. This report describes the most relevant methods developed to assess fish identity and offers a perspective on their potential in the evaluation of fish quality and safety thus depicting the key role of proteomics in the authentication of fish species and processed products. The assessment of fishery products authenticity is a main issue in the control quality process as deceptive practices could imply severe health risks. Proteomics based methods could significantly contribute to detect falsification and frauds, thus becoming a reliable operative first-line testing resource in food authentication. Copyright © 2016 Elsevier B.V. All rights reserved.

Study of the ubiquitous hog farm system using wireless sensor networks for environmental monitoring and facilities control.

PubMed

Hwang, Jeonghwan; Yoe, Hyun

2010-01-01

Many hog farmers are now suffering from high pig mortality rates due to various wasting diseases and increased breeding costs, etc. It is therefore necessary for hog farms to implement systematic and scientific pig production technology to increase productivity and produce high quality pork in order to solve these problems. In this study, we describe such a technology by suggesting a ubiquitous hog farm system which applies WSN (Wireless Sensor Network) technology to the pig industry. We suggest that a WSN and CCTV (Closed-circuit television) should be installed on hog farms to collect environmental and image information which shall then help producers not only in monitoring the hog farm via the Web from outside the farm, but also facilitate the control of hog farm facilities in remote locations. In addition, facilities can be automatically controlled based on breeding environment parameters which are already set up and a SMS notice service to notify of deviations shall provide users with convenience. Hog farmers may increase production and improve pork quality through this ubiquitous hog farm system and prepare a database with information collected from environmental factors and the hog farm control devices, which is expected to provide information needed to design and implement suitable control strategies for hog farm operation.

Study of the Ubiquitous Hog Farm System Using Wireless Sensor Networks for Environmental Monitoring and Facilities Control

PubMed Central

Hwang, Jeonghwan; Yoe, Hyun

2010-01-01

Many hog farmers are now suffering from high pig mortality rates due to various wasting diseases and increased breeding costs, etc. It is therefore necessary for hog farms to implement systematic and scientific pig production technology to increase productivity and produce high quality pork in order to solve these problems. In this study, we describe such a technology by suggesting a ubiquitous hog farm system which applies WSN (Wireless Sensor Network) technology to the pig industry. We suggest that a WSN and CCTV (Closed-circuit television) should be installed on hog farms to collect environmental and image information which shall then help producers not only in monitoring the hog farm via the Web from outside the farm, but also facilitate the control of hog farm facilities in remote locations. In addition, facilities can be automatically controlled based on breeding environment parameters which are already set up and a SMS notice service to notify of deviations shall provide users with convenience. Hog farmers may increase production and improve pork quality through this ubiquitous hog farm system and prepare a database with information collected from environmental factors and the hog farm control devices, which is expected to provide information needed to design and implement suitable control strategies for hog farm operation. PMID:22163497

A guide for digitising manuscript climate data

NASA Astrophysics Data System (ADS)

Brönnimann, S.; Annis, J.; Dann, W.; Ewen, T.; Grant, A. N.; Griesser, T.; Krähenmann, S.; Mohr, C.; Scherer, M.; Vogler, C.

2006-10-01

Hand-written or printed manuscript data are an important source for paleo-climatological studies, but bringing them into a suitable format can be a time consuming adventure with uncertain success. Before digitising such data (e.g., in the context a specific research project), it is worthwhile spending a few thoughts on the characteristics of the data, the scientific requirements with respect to quality and coverage, the metadata, and technical aspects such as reproduction techniques, digitising techniques, and quality control strategies. Here we briefly discuss the most important considerations according to our own experience and describe different methods for digitising numeric or text data (optical character recognition, speech recognition, and key entry). We present a tentative guide that is intended to help others compiling the necessary information and making the right decisions.

Investigation on trophic state index by artificial neural networks (case study: Dez Dam of Iran)

NASA Astrophysics Data System (ADS)

Saghi, H.; Karimi, L.; Javid, A. H.

2015-06-01

Dam construction and surface runoff control is one of the most common approaches for water-needs supply of human societies. However, the increasing development of social activities and hence the subsequent increase in environmental pollutants leads to deterioration of water quality in dam reservoirs and eutrophication process could be intensified. So, the water quality of reservoirs is now one of the key factors in operation and water quality management of reservoirs. Hence, maintaining the quality of the stored water and identification and examination of changes along time has been a constant concern of humans that involves the water authorities. Traditionally, empirical trophic state indices of dam reservoirs often defined based on changes in concentration of effective factors (nutrients) and its consequences (increase in chlorophyll a), have been used as an efficient tool in the definition of dam reservoirs quality. In recent years, modeling techniques such as artificial neural networks have enhanced the prediction capability and the accuracy of these studies. In this study, artificial neural networks have been applied to analyze eutrophication process in the Dez Dam reservoir in Iran. In this paper, feed forward neural network with one input layer, one hidden layer and one output layer was applied using MATLAB neural network toolbox for trophic state index (TSI) analysis in the Dez Dam reservoir. The input data of this network are effective parameters in the eutrophication: nitrogen cycle parameters and phosphorous cycle parameters and parameters that will be changed by eutrophication: Chl a, SD, DO and the output data is TSI. Based on the results from estimation of modified Carlson trophic state index, Dez Dam reservoir is considered to be eutrophic in the early July to mid-November and would be mesotrophic with decrease in temperature. Therefore, a decrease in water quality of the dam reservoir during the warm seasons is expectable. The results indicated that artificial neural network (ANN) is a suitable tool for quality modeling of reservoir of dam and increment and decrement of nutrients in trend of eutrophication. Therefore, ANN is a suitable tool for quality modeling of reservoir of dam.

76 FR 65515 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-21

... evaluation is determining participant quality of life and how the program affects quality of life. Medicaid... adequately meet their needs or does not provide them a suitable quality of life. State Operational Protocols... national evaluation contractor to assess program outcomes. The MFP Quality of Life data will be used by the...

Multiple Criteria Evaluation of Quality and Optimisation of e-Learning System Components

ERIC Educational Resources Information Center

Kurilovas, Eugenijus; Dagiene, Valentina

2010-01-01

The main research object of the paper is investigation and proposal of the comprehensive Learning Object Repositories (LORs) quality evaluation tool suitable for their multiple criteria decision analysis, evaluation and optimisation. Both LORs "internal quality" and "quality in use" evaluation (decision making) criteria are analysed in the paper.…

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

ERIC Educational Resources Information Center

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

Importance of functional and metabolic impairments in the characterization of the C-26 murine model of cancer cachexia

PubMed Central

Murphy, Kate T.; Chee, Annabel; Trieu, Jennifer; Naim, Timur; Lynch, Gordon S.

2012-01-01

SUMMARY Cancer cachexia describes the progressive skeletal muscle wasting and weakness that is associated with many cancers. It impairs quality of life and accounts for >20% of all cancer-related deaths. The main outcome that affects quality of life and mortality is loss of skeletal muscle function and so preclinical models should exhibit similar functional impairments in order to maximize translational outcomes. Mice bearing colon-26 (C-26) tumors are commonly used in cancer cachexia studies but few studies have provided comprehensive assessments of physiological and metabolic impairment, especially those factors that impact quality of life. Our aim was to characterize functional impairments in mildly and severely affected cachectic mice, and determine the suitability of these mice as a preclinical model. Metabolic abnormalities are also evident in cachectic patients and we investigated whether C-26-tumor-bearing mice had similar metabolic aberrations. Twelve-week-old CD2F1 mice received a subcutaneous injection of PBS (control) or C-26 tumor cells. After 18–20 days, assessments were made of grip strength, rotarod performance, locomotor activity, whole body metabolism, and contractile properties of tibialis anterior (TA) muscles (in situ) and diaphragm muscle strips (in vitro). Injection of C-26 cells reduced body and muscle mass, and epididymal fat mass. C-26-tumor-bearing mice exhibited lower grip strength and rotarod performance. Locomotor activity was impaired following C-26 injection, with reductions in movement distance, duration and speed compared with controls. TA muscles from C-26-tumor-bearing mice had lower maximum force (−27%) and were more susceptible to fatigue. Maximum specific (normalized) force of diaphragm muscle strips was reduced (−10%) with C-26 injection, and force during fatiguing stimulation was also lower. C-26-tumor-bearing mice had reduced carbohydrate oxidation and increased fat oxidation compared with controls. The range and consistency of functional and metabolic impairments in C-26-tumor-bearing mice confirm their suitability as a preclinical model for cancer cachexia. We recommend the use of these comprehensive functional assessments to maximize the translation of findings to more accurately identify effective treatments for cancer cachexia. PMID:22563056

A Restoration Suitability Index Model for the Eastern Oyster (Crassostrea virginica) in the Mission-Aransas Estuary, TX, USA

PubMed Central

Beseres Pollack, Jennifer; Cleveland, Andrew; Palmer, Terence A.; Reisinger, Anthony S.; Montagna, Paul A.

2012-01-01

Oyster reefs are one of the most threatened marine habitats on earth, with habitat loss resulting from water quality degradation, coastal development, destructive fishing practices, overfishing, and storm impacts. For successful and sustainable oyster reef restoration efforts, it is necessary to choose sites that support long-term growth and survival of oysters. Selection of suitable sites is critically important as it can greatly influence mortality factors and may largely determine the ultimate success of the restoration project. The application of Geographic Information Systems (GIS) provides an effective methodology for identifying suitable sites for oyster reef restoration and removes much of the uncertainty involved in the sometimes trial and error selection process. This approach also provides an objective and quantitative tool for planning future oyster reef restoration efforts. The aim of this study was to develop a restoration suitability index model and reef quality index model to characterize locations based on their potential for successful reef restoration within the Mission-Aransas Estuary, Texas, USA. The restoration suitability index model focuses on salinity, temperature, turbidity, dissolved oxygen, and depth, while the reef quality index model focuses on abundance of live oysters, dead shell, and spat. Size-specific Perkinsus marinus infection levels were mapped to illustrate general disease trends. This application was effective in identifying suitable sites for oyster reef restoration, is flexible in its use, and provides a mechanism for considering alternative approaches. The end product is a practical decision-support tool that can be used by coastal resource managers to improve oyster restoration efforts. As oyster reef restoration activities continue at small and large-scales, site selection criteria are critical for assisting stakeholders and managers and for maximizing long-term sustainability of oyster resources. PMID:22792410

Agricultural water demand, water quality and crop suitability in Souk-Alkhamis Al-Khums, Libya

NASA Astrophysics Data System (ADS)

Abunnour, Mohamed Ali; Hashim, Noorazuan Bin Md.; Jaafar, Mokhtar Bin

2016-06-01

Water scarcity, unequal population distribution and agricultural activities increased in the coastal plains, and the probability of seawater intrusion with ground water. According to this, the quantitative and qualitative deterioration of underground water quality has become a potential for the occurrence, in addition to the decline in agricultural production in the study area. This paper aims to discover the use of ground water for irrigation in agriculture and their suitability and compatibility for agricultural. On the other hand, the quality is determines by the cultivated crops. 16 random samples of regular groundwater are collected and analyzed chemically. Questionnaires are also distributed randomly on regular basis to farmers.

Alligator, Alligator mississippiensis, habitat suitability index model

USGS Publications Warehouse

Waddle, J. Hardin

2017-01-01

The 2012 Coastal Master Plan utilized Habitat Suitability Indices (HSIs) to evaluate potential project effects on wildlife species. Even though HSIs quantify habitat condition, which may not directly correlate to species abundance, they remain a practical and tractable way to assess changes in habitat quality from various restoration actions. As part of the legislatively mandated five year update to the 2012 plan, the wildlife habitat suitability indices were updated and revised using literature and existing field data where available. The outcome of these efforts resulted in improved, or in some cases entirely new suitability indices. This report describes the development of the habitat suitability indices for the American alligator, Alligator mississippiensis.

A Move from Effective to Quality.

ERIC Educational Resources Information Center

Duden, Nancy

1993-01-01

For past three years, Tallahassee, Florida, elementary school has changed from good effective school to quality learning organization. Inspired by Deming's principles, the school's broad-based task force developed a culture suitable for continuous quality improvement. Newly established core values included the importance of individuals, teachers…

AIR QUALITY SIMULATION MODEL PERFORMANCE FOR ONE-HOUR AVERAGES

EPA Science Inventory

If a one-hour standard for sulfur dioxide were promulgated, air quality dispersion modeling in the vicinity of major point sources would be an important air quality management tool. Would currently available dispersion models be suitable for use in demonstrating attainment of suc...

Meteorological Data Quality from Original Equipment Manufacturer (OEM) Sensors on Commercial Vehicles

NASA Astrophysics Data System (ADS)

Chang, C. H.; Pietras, J.; Heppner, P.; Evans, J. D.; Wang, J.

2016-12-01

The Mobile Platform Environmental Data (MoPED) system acquires real-time data on weather conditions from commercial fleet providers and provides them to the National Weather Service (NWS) for use in operations and numerical models. The MoPED system assesses the quality of these data by comparing them to observations from airport weather stations when the mobile platforms are in sufficiently close proximity (in space and time). We have devised a set of quality control algorithms that are applied to vehicle observation datasets to qualify them for dissemination to NWS. Commercial vehicles participating in MoPED have a third-party suite of sensors for ambient air temperature, relative humidity, light level, precipitation intensity, atmospheric pressure, ozone, and road temperature. In addition, some vehicles also generate meteorological data from sensors built into the vehicles themselves (original equipment manufacturer (OEM) sensors) which conform to the SAE J1939 standard for onboard vehicle networking. These sensors, known as OEM J-data sensors, measure numerous parameters associated with emissions control and engine performance - including ambient air temperature and atmospheric pressure. Time-tagged and transmitted to the MoPED system, these OEM J-data measurements can be a tremendous source of weather data for NWS if they can be extracted and communicated in real-time from the vehicles. We are working with a commercial fleet (who have OEM J-data available) to determine suitability of these data for NWS. To ensure the overall quality of the data, we have developed a methodology for assessing the suitability of classes of vehicles and sensors for inclusion in the MoPED dissemination, for the continued assessment of individual vehicles once their class has been accepted into MoPED, and for identifying corrective measures (such as adjusting measurements to correct for individual sensor offsets). A byproduct of that methodology is a multi-component model for sources of errors in mobile meteorological data measurements. We describe this error model, and provide examples of studies of candidate OEM J-data vehicle fleets in which we measured or compensated for various components of the error model.

Development and in vitro/in vivo evaluation of a novel benznidazole liquid dosage form using a quality-by-design approach.

PubMed

Santos Souza, Higo Fernando; Real, Daniel; Leonardi, Darío; Rocha, Sandra Carla; Alonso, Victoria; Serra, Esteban; Silber, Ariel Mariano; Salomon, Claudio Javier

2017-12-01

To develop an alcohol-free solution suitable for children of benznidazole, the drug of choice for treatment of Chagas disease. In a quality-by-design approach, a systematic optimisation procedure was carried out to estimate the values of the factors leading to the maximum drug concentration. The formulations were analysed in terms of chemical and physical stability and drug content. The final preparation was subjected to an in vivo palatability assay. Mice were infected and treated orally in a murine model. The results showed that benznidazole solubility increased up to 18.38 mg/ml in the optimised co-solvent system. The final formulation remained stable at all three temperatures tested, with suitable drug content and no significant variability. Palatability of the preparation was improved by taste masking of BZL. In vivo studies showed that both parasitaemia and mortality diminished, particularly at a dose of 40 mg/kg/day. Quality by design was a suitable approach to formulate a co-solvent system of benznidazole. The in vivo studies confirmed the suitability of the optimised such solutions to diminish both parasitaemia and mortality. Thus, this novel alternative should be taken into account for further clinical evaluation in all age ranges. © 2017 John Wiley & Sons Ltd.

Does quality of drinking water matter in kidney stone disease: A study in West Bengal, India.

PubMed

Mitra, Pubali; Pal, Dilip Kumar; Das, Madhusudan

2018-05-01

The combined interaction of epidemiology, environmental exposure, dietary habits, and genetic factors causes kidney stone disease (KSD), a common public health problem worldwide. Because a high water intake (>3 L daily) is widely recommended by physicians to prevent KSD, the present study evaluated whether the quantity of water that people consume daily is associated with KSD and whether the quality of drinking water has any effect on disease prevalence. Information regarding residential address, daily volume of water consumption, and source of drinking water was collected from 1,266 patients with kidney stones in West Bengal, India. Drinking water was collected by use of proper methods from case (high stone prevalence) and control (zero stone prevalence) areas thrice yearly. Water samples were analyzed for pH, alkalinity, hardness, total dissolved solutes, electrical conductivity, and salinity. Average values of the studied parameters were compared to determine if there were any statistically significant differences between the case and control areas. We observed that as many as 53.6% of the patients consumed <3 L of water daily. Analysis of drinking water samples from case and control areas, however, did not show any statistically significant alterations in the studied parameters. All water samples were found to be suitable for consumption. It is not the quality of water, rather the quantity of water consumed that matters most in the occurrence of KSD.

Identification, assessment, and control of hazards in water supply: experiences from Water Safety Plan implementations in Germany.

PubMed

Mälzer, H-J; Staben, N; Hein, A; Merkel, W

2010-01-01

According to the recommendations of the World Health Organization (WHO) for Water Safety Plans (WSP), a Technical Risk Management was developed, which considers standard demands in drinking water treatment in Germany. It was already implemented at several drinking water treatment plants of different size and treatment processes in Germany. Hazards affecting water quality, continuity, and the reliability of supply from catchment to treatment and distribution could be identified by a systematic approach, and suitable control measures were defined. Experiences are presented by detailed examples covering methods, practical consequences, and further outcomes. The method and the benefits for the water suppliers are discussed and an outlook on the future role of WSPs in German water supply is given.

The concept of the mechanically active guideway as a novel approach to maglev

NASA Technical Reports Server (NTRS)

Horwath, T. G.

1992-01-01

A maglev system that is suitable for operation in the United States will have to meet unique requirements which determine the major systems characteristics. Maglev configurations presently developed in Germany and Japan are based on conventional maglev concepts and as such do not meet all of the requirements. A novel maglev guideway concept is introduced as a solution. This concept, the mechanically active guideway, is articulated in three degrees of freedom and assumes system functions which normally reside in the maglev vehicle. The mechanically active guideway contains spatially distributed actuators which are energized under computer control at the time of vehicle passage to achieve bank angle adjustment and ride quality control. A typical realization of the concept is outlined.

A translational velocity command system for VTOL low speed flight

NASA Technical Reports Server (NTRS)

Merrick, V. K.

1982-01-01

A translational velocity flight controller, suitable for very low speed maneuvering, is described and its application to a large class of VTOL aircraft from jet lift to propeller driven types is analyzed. Estimates for the more critical lateral axis lead to the conclusion that the controller would provide a jet lift (high disk loading) VTOL aircraft with satisfactory "hands off" station keeping in operational conditions more stringent than any specified in current or projected requirements. It also seems likely that ducted fan or propeller driven (low disk loading) VTOL aircraft would have acceptable hovering handling qualities even in high turbulence, although in these conditions pilot intervention to maintain satisfactory station keeping would probably be required for landing in restricted areas.

Comparison of the effectiveness of two different bone substitute materials for socket preservation after tooth extraction: a controlled clinical study.

PubMed

Shakibaie-M, Behnam

2013-01-01

The aim of this study was to compare the effectiveness of two bone substitute materials for socket preservation after tooth extraction. Extraction sockets in 10 patients were filled with either inorganic bovine bone material (Bio-Oss) or with synthetic material consisting of hydroxyapatite and silicon dioxide (NanoBone). Extraction sockets without filling served as the control. The results demonstrate the effectiveness of the presented protocol for socket preservation and that the choice of a suitable bone substitute material is crucial. The dimensions of the alveolar ridge were significantly better preserved with Bio-Oss than with NanoBone or without treatment. Bio-Oss treatment resulted in better bone quality and quantity for successful implant placement.

Using clinical indicators to facilitate quality improvement via the accreditation process: an adaptive study into the control relationship.

PubMed

Chuang, Sheuwen; Howley, Peter P; Hancock, Stephen

2013-07-01

The aim of the study was to determine accreditation surveyors' and hospitals' use and perceived usefulness of clinical indicator reports and the potential to establish the control relationship between the accreditation and reporting systems. The control relationship refers to instructional directives, arising from appropriately designed methods and efforts towards using clinical indicators, which provide a directed moderating, balancing and best outcome for the connected systems. Web-based questionnaire survey. Australian Council on Healthcare Standards' (ACHS) accreditation and clinical indicator programmes. Seventy-three of 306 surveyors responded. Half used the reports always/most of the time. Five key messages were revealed: (i) report use was related to availability before on-site investigation; (ii) report use was associated with the use of non-ACHS reports; (iii) a clinical indicator set's perceived usefulness was associated with its reporting volume across hospitals; (iv) simpler measures and visual summaries in reports were rated the most useful; (v) reports were deemed to be suitable for the quality and safety objectives of the key groups of interested parties (hospitals' senior executive and management officers, clinicians, quality managers and surveyors). Implementing the control relationship between the reporting and accreditation systems is a promising expectation. Redesigning processes to ensure reports are available in pre-survey packages and refined education of surveyors and hospitals on how to better utilize the reports will support the relationship. Additional studies on the systems' theory-based model of the accreditation and reporting system are warranted to establish the control relationship, building integrated system-wide relationships with sustainable and improved outcomes.

Control and Measurement of an Xmon with the Quantum Socket

NASA Astrophysics Data System (ADS)

McConkey, T. G.; Bejanin, J. H.; Earnest, C. T.; McRae, C. R. H.; Rinehart, J. R.; Weides, M.; Mariantoni, M.

The implementation of superconducting quantum processors is rapidly reaching scalability limitations. Extensible electronics and wiring solutions for superconducting quantum bits (qubits) are among the most imminent issues to be tackled. The necessity to substitute planar electrical interconnects (e.g., wire bonds) with three-dimensional wires is emerging as a fundamental pillar towards scalability. In a previous work, we have shown that three-dimensional wires housed in a suitable package, named the quantum socket, can be utilized to measure high-quality superconducting resonators. In this work, we set out to test the quantum socket with actual superconducting qubits to verify its suitability as a wiring solution in the development of an extensible quantum computing architecture. To this end, we have designed and fabricated a series of Xmon qubits. The qubits range in frequency from about 6 to 7 GHz with anharmonicity of 200 MHz and can be tuned by means of Z pulses. Controlling tunable Xmons will allow us to verify whether the three-dimensional wires contact resistance is low enough for qubit operation. Qubit T1 and T2 times and single qubit gate fidelities are compared against current standards in the field.

POTENTIAL EFFECTS OF WHOLE-BODY VIBRATION EXERCISES ON BLOOD FLOW KINETICS OF DIFFERENT POPULATIONS: A SYSTEMATIC REVIEW WITH A SUITABLE APPROACH

PubMed Central

Sá-Caputo, Danúbia; Paineiras-Domingos, Laisa; Carvalho-Lima, Rafaelle; Dias-Costa, Glenda; de Paiva, Patrícia de Castro; de Azeredo, Claudia Figueiredo; Carmo, Roberto Carlos Resende; Dionello, Carla F.; Moreira-Marconi, Eloá; Frederico, Éric Heleno F.F.; Sousa-Gonçalves, Cintia Renata; Morel, Danielle S.; Paiva, Dulciane N.; Avelar, Núbia C.P.; Lacerda, Ana C.; Magalhães, Carlos E.V.; Castro, Leonardo S.; Presta, Giuseppe A.; de Paoli, Severo; Sañudo, Borja; Bernardo-Filho, Mario

2017-01-01

Background: The ability to control skin blood flow decreases with advancing age and some clinical disorders, as in diabetes and in rheumatologic diseases. Feasible clinical strategies such as whole-body vibration exercise (WBVE) are being used without a clear understanding of its effects. The aim of the present study is to review the effects of the WBVE on blood flow kinetics and its feasibility in different populations. Material and Methods: The level of evidence (LE) of selected papers in PubMed and/or PEDRo databases was determined. We selected randomized, controlled trials in English to be evaluated. Results: Six studies had LE II, one had LE III-2 and one III-3 according to the NHMRC. A great variability among the protocols was observed but also in the assessment devices; therefore, more research about this topic is warranted. Conclusion: Despite the limitations, it is can be concluded that the use of WBVE has proven to be a safe and useful strategy to improve blood flow. However, more studies with greater methodological quality are needed to clearly define the more suitable protocols. PMID:28740943

CRANBERRY WILDERNESS STUDY AREA, WEST VIRGINIA.

USGS Publications Warehouse

Meissner, Charles R.; Mory, P.C.

1984-01-01

The Cranberry Wilderness Study Area, West Virginia contains a large demonstrated resource of bituminous coal of coking quality. Demonstrated coal resources in beds more than 14 in. thick are about 110 million short tons of which 56. 5 million tons are in beds more than 28 in. thick in areas of substantiated coal resource potential. Other mineral resources in the study area include peat, shale and clay suitable for building brick and lightweight aggregate, sandstone suitable for low-quality glass sand, and sandstone suitable for construction material. These commodities are found in abundance in other areas throughout the State. Study of the drill-hole data did not reveal indications of a potential for oil and gas resources in the study area. Evidence of metallic mineral potential was not found during this investigation.

Study on the total amount control of atmospheric pollutant based on GIS.

PubMed

Wang, Jian-Ping; Guo, Xi-Kun

2005-08-01

To provide effective environmental management for total amount control of atmospheric pollutants. An atmospheric diffusion model of sulfur dioxide on the surface of the earth was established and tested in Shantou of Guangdong Province on the basis of an overall assessment of regional natural environment, social economic state of development, pollution sources and atmospheric environmental quality. Compared with actual monitoring results in a studied region, simulation values fell within the range of two times of error and were evenly distributed in the two sides of the monitored values. Predicted with the largest emission model method, the largest emission of sulfur dioxide would be 54,279.792 tons per year in 2010. The mathematical model established and revised on the basis of GIS is more rational and suitable for the regional characteristics of total amount control of air pollutants.

Programmable dispersion on a photonic integrated circuit for classical and quantum applications.

PubMed

Notaros, Jelena; Mower, Jacob; Heuck, Mikkel; Lupo, Cosmo; Harris, Nicholas C; Steinbrecher, Gregory R; Bunandar, Darius; Baehr-Jones, Tom; Hochberg, Michael; Lloyd, Seth; Englund, Dirk

2017-09-04

We demonstrate a large-scale tunable-coupling ring resonator array, suitable for high-dimensional classical and quantum transforms, in a CMOS-compatible silicon photonics platform. The device consists of a waveguide coupled to 15 ring-based dispersive elements with programmable linewidths and resonance frequencies. The ability to control both quality factor and frequency of each ring provides an unprecedented 30 degrees of freedom in dispersion control on a single spatial channel. This programmable dispersion control system has a range of applications, including mode-locked lasers, quantum key distribution, and photon-pair generation. We also propose a novel application enabled by this circuit - high-speed quantum communications using temporal-mode-based quantum data locking - and discuss the utility of the system for performing the high-dimensional unitary optical transformations necessary for a quantum data locking demonstration.

Greenhouse intelligent control system based on microcontroller

NASA Astrophysics Data System (ADS)

Zhang, Congwei

2018-04-01

As one of the hallmarks of agricultural modernization, intelligent greenhouse has the advantages of high yield, excellent quality, no pollution and continuous planting. Taking AT89S52 microcontroller as the main controller, the greenhouse intelligent control system uses soil moisture sensor, temperature and humidity sensors, light intensity sensor and CO2 concentration sensor to collect measurements and display them on the 12864 LCD screen real-time. Meantime, climate parameter values can be manually set online. The collected measured values are compared with the set standard values, and then the lighting, ventilation fans, warming lamps, water pumps and other facilities automatically start to adjust the climate such as light intensity, CO2 concentration, temperature, air humidity and soil moisture of the greenhouse parameter. So, the state of the environment in the greenhouse Stabilizes and the crop grows in a suitable environment.

Towards an agent based traffic regulation and recommendation system for the on-road air quality control.

PubMed

Sadiq, Abderrahmane; El Fazziki, Abdelaziz; Ouarzazi, Jamal; Sadgal, Mohamed

2016-01-01

This paper presents an integrated and adaptive problem-solving approach to control the on-road air quality by modeling the road infrastructure, managing traffic based on pollution level and generating recommendations for road users. The aim is to reduce vehicle emissions in the most polluted road segments and optimizing the pollution levels. For this we propose the use of historical and real time pollution records and contextual data to calculate the air quality index on road networks and generate recommendations for reassigning traffic flow in order to improve the on-road air quality. The resulting air quality indexes are used in the system's traffic network generation, which the cartography is represented by a weighted graph. The weights evolve according to the pollution indexes and path properties and the graph is therefore dynamic. Furthermore, the systems use the available pollution data and meteorological records in order to predict the on-road pollutant levels by using an artificial neural network based prediction model. The proposed approach combines the benefits of multi-agent systems, Big data technology, machine learning tools and the available data sources. For the shortest path searching in the road network, we use the Dijkstra algorithm over Hadoop MapReduce framework. The use Hadoop framework in the data retrieve and analysis process has significantly improved the performance of the proposed system. Also, the agent technology allowed proposing a suitable solution in terms of robustness and agility.

Integrated application of river water quality modelling and cost-benefit analysis to optimize the environmental economical value based on various aquatic waste load reduction strategies

NASA Astrophysics Data System (ADS)

Wu, Chen-Yu; Fan, Chihhao

2017-04-01

To assure the river water quality, the Taiwan government establishes many pollution control strategies and expends huge monetary investment. Despite all these efforts, many rivers still suffer from severe pollution because of massive discharges of domestic and industrial wastewater without proper treatment. A comprehensive evaluation tool seems required to assess the suitability of water pollution control strategies. Therefore, the purpose of this study is to quantify the potential strategic benefits by applying the water quality modelling integrated with cost-benefit analysis to simulating scenarios based on regional development planning. The Erhjen Creek is selected as the study example because it is a major river in southern Taiwan, and its riverine environment impacts a great deal to the neighboring people. For strategy assessment, we established QUAL2k model of Erhjen Creek and conducted the cost-benefit analyses according the proposed strategies. In the water quality simulation, HEC-RAS was employed to calculate the hydraulic parameters and dilution impact of tidal effect in the downstream section. Daily pollution loadings were obtained from the Water Pollution Control Information System maintained by Taiwan EPA, and the wastewater delivery ratios were calculated by comparing the occurrence of pollution loadings with the monitoring data. In the cost-benefit analysis, we adopted the market valuation method, setting a period of 65 years for analysis and discount rate at 2.59%. Capital investments were the costs of design, construction, operation and maintenance for each project in Erhjen Creek catchment. In model calibration and model verification, the mean absolute percentage errors (MAPEs) were calculated to be 21.4% and 25.5%, respectively, which met the prescribed acceptable criteria of 50%. This model was applied to simulating water quality based on implementing various pollution control policies and engineering projects in the Erhjen Creek. The overall improvements in BOD, SS and NH3-N were estimated as 36.2%, 27.7% and 29.2%, respectively. The net present value (i.e., economical-based environmental impact) becomes positive in the sixtieth year following the original government planning. We designed two scenarios for further comparison: (i) treatment efficiency improvement of pollution control facilities, and (ii) biogas-based power generation using livestock manure. If government budget is not a limiting factor, improving the efficiency of sewage treatment plants can make the occurrence of balance between payments and revenues (i.e., net present value in this study) three years earlier. For the biogas-based power generation scenario, if all pig farms with livestock number >2000 install the on-site power generation equipment, BOD will further improve by 9% and the time span of payback period will be shortened by 1 year. If all the manure waste from pig-farms is collected for subsequent electricity generation, the BOD river pollution index is estimated to improve to lightly-polluted category for more than half the length of Erhjen Creek. In short, water quality modelling technique not only can assess the contributions of related projects, but establish a practical pollution reduction strategy using cost-benefit analysis, which allows decision-maker to find a suitable pollution reduction plan to exhibit most benefits in river water quality.

Quality by design approach in the development of an ultra-high-performance liquid chromatography method for Bexsero meningococcal group B vaccine.

PubMed

Nompari, Luca; Orlandini, Serena; Pasquini, Benedetta; Campa, Cristiana; Rovini, Michele; Del Bubba, Massimo; Furlanetto, Sandra

2018-02-01

Bexsero is the first approved vaccine for active immunization of individuals from 2 months of age and older to prevent invasive disease caused by Neisseria meningitidis serogroup B. The active components of the vaccine are Neisseria Heparin Binding Antigen, factor H binding protein, Neisseria adhesin A, produced in Escherichia coli cells by recombinant DNA technology, and Outer Membrane Vesicles (expressing Porin A and Porin B), produced by fermentation of Neisseria meningitidis strain NZ98/254. All the Bexsero active components are adsorbed on aluminum hydroxide and the unadsorbed antigens content is a product critical quality attribute. In this paper the development of a fast, selective and sensitive ultra-high-performance liquid chromatography (UHPLC) method for the determination of the Bexsero antigens in the vaccine supernatant is presented. For the first time in the literature, the Quality by Design (QbD) principles were applied to the development of an analytical method aimed to the quality control of a vaccine product. The UHPLC method was fully developed within the QbD framework, the new paradigm of quality outlined in International Conference on Harmonisation guidelines. Critical method attributes (CMAs) were identified with the capacity factor of Neisseria Heparin Binding Antigen, antigens resolution and peak areas. After a scouting phase, aimed at selecting a suitable and fast UHPLC operative mode for the vaccine antigens separation, risk assessment tools were employed to define the critical method parameters to be considered in the screening phase. Screening designs were applied for investigating at first the effects of vial type and sample concentration, and then the effects of injection volume, column type, organic phase starting concentration, ramp time and temperature. Response Surface Methodology pointed out the presence of several significant interaction effects, and with the support of Monte-Carlo simulations led to map out the design space, at a selected probability level, for the desired CMAs. The selected working conditions gave a complete separation of the antigens in about 5min. Robustness testing was carried out by a multivariate approach and a control strategy was implemented by defining system suitability tests. The method was qualified for the analysis of the Bexsero vaccine. Copyright © 2017 Elsevier B.V. All rights reserved.

The importance of quality control in validating concentrations of contaminants of emerging concern in source and treated drinking water samples.

PubMed

Batt, Angela L; Furlong, Edward T; Mash, Heath E; Glassmeyer, Susan T; Kolpin, Dana W

2017-02-01

A national-scale survey of 247 contaminants of emerging concern (CECs), including organic and inorganic chemical compounds, and microbial contaminants, was conducted in source and treated drinking water samples from 25 treatment plants across the United States. Multiple methods were used to determine these CECs, including six analytical methods to measure 174 pharmaceuticals, personal care products, and pesticides. A three-component quality assurance/quality control (QA/QC) program was designed for the subset of 174 CECs which allowed us to assess and compare performances of the methods used. The three components included: 1) a common field QA/QC protocol and sample design, 2) individual investigator-developed method-specific QA/QC protocols, and 3) a suite of 46 method comparison analytes that were determined in two or more analytical methods. Overall method performance for the 174 organic chemical CECs was assessed by comparing spiked recoveries in reagent, source, and treated water over a two-year period. In addition to the 247 CECs reported in the larger drinking water study, another 48 pharmaceutical compounds measured did not consistently meet predetermined quality standards. Methodologies that did not seem suitable for these analytes are overviewed. The need to exclude analytes based on method performance demonstrates the importance of additional QA/QC protocols. Published by Elsevier B.V.

Effect of Medicinal Herbs on Primary Dysmenorrhoea- a Systematic Review

PubMed Central

Mirabi, Parvaneh; Alamolhoda, Seideh Hanieh; Esmaeilzadeh, Seddigheh; Mojab, Faraz

2014-01-01

Conventional treatment for primary dysmenorrhoea has a failure rate of 20% to 25% and may be contraindicated or not tolerated by some women. Herbal medicine may be a suitable alternative. To determine the efficacy and safety of Iranian herbal medicine for primary dysmenorrhea when compared with placebo, no treatment, and other treatment. Electronic searches of the Cochrane Menstrual Disorders and Dysmenorrhoea Group Register of controlled trials, Scopus, Google Scholar, Medline, Pubmed were performed to identify relevant randomized controlled trials (RCTs). The study abstraction and quality assessment of all studies were undertaken following the detailed descriptions of these categories as described in the JADAD Criteria for Systematic Reviews of Interventions. 25 RCTs involving a total of women were included in the review. The review found promising evidence in the form of RCTs for the use of herbal medicine in the treatment of primary dysmenorrhoea compared with pharmacological treatment. However, the results were limited by methodological flaws. Further rigorous no penetrating placebo-controlled RCTs are warranted. The review found promising evidence supporting the use of herbal medicine for primary dysmenorrhoea; however, results are limited by the poor methodological quality of the included trials. PMID:25276177

Quality assessment of noodles made from blends of rice flour and canna starch.

PubMed

Wandee, Yuree; Uttapap, Dudsadee; Puncha-arnon, Santhanee; Puttanlek, Chureerat; Rungsardthong, Vilai; Wetprasit, Nuanchawee

2015-07-15

Canna starch and its derivatives (retrograded, retrograded debranched, and cross-linked) were evaluated for their suitability to be used as prebiotic sources in a rice noodle product. Twenty percent of the rice flour was replaced with these tested starches, and the noodles obtained were analyzed for morphology, cooking qualities, textural properties, and capability of producing short-chain fatty acids (SCFAs). Cross-linked canna starch could increase tensile strength and elongation of rice noodles. Total dietary fiber (TDF) content of noodles made from rice flour was 3.0% and increased to 5.1% and 7.3% when rice flour was replaced with retrograded and retrograded debranched starches, respectively. Cooking qualities and textural properties of noodles containing 20% retrograded debranched starch were mostly comparable, while the capability of producing SCFAs and butyric acid was superior to the control rice noodles; the cooked noodle strips also showed fewer tendencies to stick together. Copyright © 2015 Elsevier Ltd. All rights reserved.

Relationship between perceived politeness and spectral characteristics of voice

NASA Astrophysics Data System (ADS)

Ito, Mika

2005-04-01

This study investigates the role of voice quality in perceiving politeness under conditions of varying relative social status among Japanese male speakers. The work focuses on four important methodological issues: experimental control of sociolinguistic aspects, eliciting natural spontaneous speech, obtaining recording quality suitable for voice quality analysis, and assessment of glottal characteristics through the use of non-invasive direct measurements of the speech spectrum. To obtain natural, unscripted utterances, the speech data were collected with a Map Task. This methodology allowed us to study the effect of manipulating relative social status among participants in the same community. We then computed the relative amplitudes of harmonics and formant peaks in spectra obtained from the Map Task recordings. Finally, an experiment was conducted to observe the alignment between acoustic measures and the perceived politeness of the voice samples. The results suggest that listeners' perceptions of politeness are determined by spectral characteristics of speakers, in particular, spectral tilts obtained by computing the difference in amplitude between the first harmonic and the third formant.

Postharvest evaluation of soilless-grown table grape during storage in modified atmosphere.

PubMed

Cefola, Maria; Pace, Bernardo; Buttaro, Donato; Santamaria, Pietro; Serio, Francesco

2011-09-01

Soilless growth systems, developed mainly for vegetables and ornamental crops, have also been used recently as an alternative to soil culture for table grape in order to achieve optimal production performance. In this study, sensory, physical and chemical parameters were analysed in table grapes obtained from soil and soilless growth systems at harvest and during storage in air or modified atmosphere. At harvest, soilless-grown berries were 30% firmer than those grown in soil. Moreover, they showed 60% higher antioxidant activity and total phenol content than soil-grown fruits. Modified atmosphere storage resulted in a better quality of table grapes compared with those stored in air. Furthermore, soilless growth was more suitable than soil growth for preserving visual quality and controlling rachis browning and weight loss. Since the soilless system produces berries that are cleaner and of higher quality than those grown in soil, the implementation of soilless growth for the production of health-promoting and convenience fruits is suggested. Copyright © 2011 Society of Chemical Industry.

Malaria Diagnostics in Clinical Trials

PubMed Central

Murphy, Sean C.; Shott, Joseph P.; Parikh, Sunil; Etter, Paige; Prescott, William R.; Stewart, V. Ann

2013-01-01

Malaria diagnostics are widely used in epidemiologic studies to investigate natural history of disease and in drug and vaccine clinical trials to exclude participants or evaluate efficacy. The Malaria Laboratory Network (MLN), managed by the Office of HIV/AIDS Network Coordination, is an international working group with mutual interests in malaria disease and diagnosis and in human immunodeficiency virus/acquired immunodeficiency syndrome clinical trials. The MLN considered and studied the wide array of available malaria diagnostic tests for their suitability for screening trial participants and/or obtaining study endpoints for malaria clinical trials, including studies of HIV/malaria co-infection and other malaria natural history studies. The MLN provides recommendations on microscopy, rapid diagnostic tests, serologic tests, and molecular assays to guide selection of the most appropriate test(s) for specific research objectives. In addition, this report provides recommendations regarding quality management to ensure reproducibility across sites in clinical trials. Performance evaluation, quality control, and external quality assessment are critical processes that must be implemented in all clinical trials using malaria tests. PMID:24062484

Fabrication of Titania Nanotubes for Gas Sensing Applications

NASA Astrophysics Data System (ADS)

Dzilal, A. A.; Muti, M. N.; John, O. D.

2010-03-01

Detection of hydrogen is needed for industrial process control and medical applications where presence of hydrogen indicates different type of health problems. Titanium dioxide nanotube structure is chosen as an active component in the gas sensor because of its highly sensitive electrical resistance to hydrogen over a wide range of concentrations. The objective of the work is to fabricate good quality titania nanotubes suitable for hydrogen sensing applications. The fabrication method used is anodizing method. The anodizing parameters namely the voltage, time duration, concentration of hydrofluoric acid in water, separation between the electrodes and the ambient temperature are varied accordingly to find the optimum anodizing conditions for production of good quality titania nanotubes. The highly ordered porous titania nanotubes produced by this method are in tabular shape and have good uniformity and alignment over large areas. From the investigation done, certain set of anodizing parameters have been found to produce good quality titania nanotubes with diameter ranges from 47 nm to 94 nm.

Water quality . . . potential sources of pollution

USGS Publications Warehouse

Vandas, Stephen; Farrar, Frank

1996-01-01

What is water quality? To most students, water quality may suggest only "clean" water for drinking, swimming, and fishing. But to the farmer or manufacturer, water quality may have an entirely different meaning. One of the most important issues concerning the quality of water is how that water will be used. Water that is perfectly fine for irrigation might not be suitable for drinking or swimming.

Data on assessment of groundwater quality for drinking and irrigation in rural area Sarpol-e Zahab city, Kermanshah province, Iran.

PubMed

Soleimani, Hamed; Abbasnia, Abbas; Yousefi, Mahmood; Mohammadi, Ali Akbar; Khorasgani, Fazlollah Changani

2018-04-01

In present study 30 groundwater samples were collected from Sarpol-e Zahab area, Kermanshah province of Iran in order to assess the quality of groundwater in subjected area and determining its suitability for drinking and agricultural purposes. Also the variations in the quality levels of groundwater were compared over the years of 2015 and 2016. Statistical analyses including Spearman correlation coefficients and factor analysis display good correlation between physicochemical parameters (EC, TDS and TH) and Na + , Mg 2+ , Ca 2+ , Cl - and [Formula: see text] ionic constituents. Also in order to assess water quality for irrigation we used the United States Department of Agriculture (USDA) classification which is based on SAR for irrigation suitability assessment. In addition, the residual sodium carbonate (RSC), %Na, PI, KR, SSP, MH, EC characteristics were calculated for all samples and used for assessment of irrigation suitability. Based on these indicators, for every two years, the quality of water for agriculture is in good and excellent category. The Piper classification for hydro geochemical facies indicates that the water in the study area is of Ca-HCO 3 - type. However, the study of water hardness shows that more than 80% of samples are in hard and very hard water class. Therefore, there is a need for decisions to refine and soften the water.

High-quality Health Information Provision for Stroke Patients.

PubMed

Du, Hong-Sheng; Ma, Jing-Jian; Li, Mu

2016-09-05

High-quality information provision can allow stroke patients to effectively participate in healthcare decision-making, better manage the stroke, and make a good recovery. In this study, we reviewed information needs of stroke patients, methods for providing information to patients, and considerations needed by the information providers. The literature concerning or including information provision for patients with stroke in English was collected from PubMed published from 1990 to 2015. We included all the relevant articles on information provision for stroke patients in English, with no limitation of study design. Stroke is a major public health concern worldwide. High-quality and effective health information provision plays an essential role in helping patients to actively take part in decision-making and healthcare, and empowering them to effectively self-manage their long-standing chronic conditions. Different methods for providing information to patients have their relative merits and suitability, and as a result, the effective strategies taken by health professionals may include providing high-quality information, meeting patients' individual needs, using suitable methods in providing information, and maintaining active involvement of patients. It is suggested that to enable stroke patients to access high-quality health information, greater efforts need to be made to ensure patients to receive accurate and current evidence-based information which meets their individual needs. Health professionals should use suitable information delivery methods, and actively involve stroke patients in information provision.

SU-F-J-16: Planar KV Imaging Dose Reduction Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gershkevitsh, E; Zolotuhhin, D

Purpose: IGRT has become an indispensable tool in modern radiotherapy with kV imaging used in many departments due to superior image quality and lower dose when compared to MV imaging. Many departments use manufacturer supplied protocols for imaging which are not always optimised between image quality and radiation dose (ALARA). Methods: Whole body phantom PBU-50 (Kyoto Kagaku ltd., Japan) for imaging in radiology has been imaged on Varian iX accelerator (Varian Medical Systems, USA) with OBI 1.5 system. Manufacturer’s default protocols were adapted by modifying kV and mAs values when imaging different anatomical regions of the phantom (head, thorax, abdomen,more » pelvis, extremities). Images with different settings were independently reviewed by two persons and their suitability for IGRT set-up correction protocols were evaluated. The suitable images with the lowest mAs were then selected. The entrance surface dose (ESD) for manufacturer’s default protocols and modified protocols were measured with RTI Black Piranha (RTI Group, Sweden) and compared. Image quality was also measured with kVQC phantom (Standard Imaging, USA) for different protocols. The modified protocols have been applied for clinical work. Results: For most cases optimized protocols reduced the ESD on average by a factor of 3(range 0.9–8.5). Further reduction in ESD has been observed by applying bow-tie filter designed for CBCT. The largest reduction in dose (12.2 times) was observed for Thorax lateral protocol. The dose was slightly increased (by 10%) for large pelvis AP protocol. Conclusion: Manufacturer’s default IGRT protocols could be optimised to reduce the ESD to the patient without losing the necessary image quality for patient set-up correction. For patient set-up with planar kV imaging the bony anatomy is mostly used and optimization should focus on this aspect. Therefore, the current approach with anthropomorphic phantom is more advantageous in optimization over standard kV quality control phantoms and SNR metrics.« less

A perspective on the FAA approval process: Integrating rotorcraft displays, controls and workload

NASA Technical Reports Server (NTRS)

Green, David L.; Hart, Jake; Hwoschinsky, Peter

1993-01-01

The FAA is responsible for making the determination that a helicopter is safe for IFR operations in the National Airspace System (NAS). This involves objective and subjective evaluations of cockpit displays, flying qualities, procedures and human factors as they affect performance and workload. After all of the objective evaluations are completed, and all Federal Regulations have been met, FAA pilots make the final subjective judgement as to suitability for use by civil pilots in the NAS. The paper uses the flying qualities and pilot workload characteristics of a small helicopter to help examine the FAA pilot's involvement in this process. The result highlights the strengths of the process and its importance to the approval of new aircraft and equipments for civil IFR helicopter applications. The paper also identifies opportunities for improvement.

[Post launch studies].

PubMed

Akaza, Hideyuki; Ohashi, Yasuo; Shimada, Yasuhiro; Ikeda, Tadashi; Saijo, Nagahiro; Isonishi, Seiji; Hirao, Yoshihiko; Tsuruo, Takashi; Tsukagoshi, Shigeru; Sone, Saburo; Nakamura, Seigo; Kato, Masuhiro; Mikami, Osamu; von Euler, Mikael; Blackledge, George; Milsted, Bob; Vose, Brent

2002-11-01

Evidence Based Medicine (EBM) is a growing concept in Japan as it is elsewhere. Central to improving the use of EBM is generation of data through well conducted controlled clinical studies. There are many problems associated with conduct of clinical studies after launch in Japan, and many initiatives are ongoing to improve the situation. Development of Clinical Research Coordinators (CRO) and central Data Management centers are key to improving the quality of clinical research in Japan. Currently Japan has an undeveloped legal system with regard to post-launch trials and off-label use of registered drugs. There is no reimbursement for off-label and various restrictions imposed on the recipients of the Ministry of Health, Labour and Welfare's (MHLW) funds. Maybe the biggest problem is the high cost of post-marketing studies sponsored by pharmaceutical manufacturers. A high quality system to support post launch clinical studies need a solid financial base. There is a need for a suitable review system for investigator initiated multi-centre studies, as the current IRB system is not sufficient. There are also challenges regarding the differences, perceived or real, in treatment practice and available registrations in Japan and in the West, causing problems in choosing suitable comparators and study designs. At the present time it is not clear whether investigator initiated trials will be acceptable for registration purposes in Japan. The agreed first priority is to build a suitable and strong infrastructure within the academic community to support researchers to investigate important questions with or without pharmaceutical company support. Despite all these issues, several groundbreaking projects are under way throughout Japan, in many different areas and by different collaborative groups, some with government support. In fact, researcher-initiated clinical trials achieved a rapid growth in Japan in the past year.

Effect of nasal deviation on quality of life.

PubMed

de Lima Ramos, Sueli; Hochman, Bernardo; Gomes, Heitor Carvalho; Abla, Luiz Eduardo Felipe; Veiga, Daniela Francescato; Juliano, Yara; Dini, Gal Moreira; Ferreira, Lydia Masako

2011-07-01

Nasal deviation is a common complaint in otorhinolaryngology and plastic surgery. This condition not only causes impairment of nasal function but also affects quality of life, leading to psychological distress. The subjective assessment of quality of life, as an important aspect of outcomes research, has received increasing attention in recent decades. Quality of life is measured using standardized questionnaires that have been tested for reliability, validity, and sensitivity. The aim of this study was to evaluate health-related quality of life, self-esteem, and depression in patients with nasal deviation. Sixty patients were selected for the study. Patients with nasal deviation (n = 32) were assigned to the study group, and patients without nasal deviation (n = 28) were assigned to the control group. The diagnosis of nasal deviation was made by digital photogrammetry. Quality of life was assessed using the Medical Outcomes Study 36-Item Short Form Health Survey questionnaire; the Rosenberg Self-Esteem/Federal University of São Paulo, Escola Paulista de Medicina Scale; and the 20-item Self-Report Questionnaire. There were significant differences between groups in the physical functioning and general health subscales of the Medical Outcomes Study 36-Item Short Form Health Survey (p < 0.05). Depression was detected in 11 patients (34.4 percent) in the study group and in two patients in the control group, with a significant difference between groups (p < 0.05). Nasal deviation is an aspect of rhinoplasty of which the surgeon should be aware so that proper psychological diagnosis can be made and suitable treatment can be planned because psychologically the patients with nasal deviation have significantly worse quality of life and are more prone to depression. Risk, II.(Figure is included in full-text article.).

Effects of multifocal soft contact lenses used to slow myopia progression on quality of vision in young adults.

PubMed

Kang, Pauline; McAlinden, Colm; Wildsoet, Christine F

2017-02-01

To assess the effects of multifocal soft contact lenses (MF SCLs) used for myopia control on visual acuity (VA) and subjective quality of vision. Twenty-four young adult myopes had baseline high and low-contrast VAs and refractions measured and quality of vision assessed by the Quality of Vision (QoV) questionnaire with single vision SCLs. Additional VA and QoV questionnaire data were collected immediately after subjects were fitted with Proclear MF SCLs and again after a 2-week adaptation period of daily lens wear. Data were collected for two MF SCL designs, incorporating +1.50 and +3.00 D peripheral near additions, with a week washout period allowed between the two lens trials. High- and low-contrast VAs were initially reduced with both MF SCL designs, but subsequently improved to be not significantly reduced in the case of high-contrast VA by the end of the 2-week adaptation period. The quality of vision was also reduced, more so with the +3.00 D MF SCL. Quality of Vision (QoV) scores describing frequency, severity and bothersome nature of visual symptoms indicated symptoms worsening rather than resolving over the 2-week period, particularly so with the +3.00 D MF SCL. Low and high add MF SCLs adversely affected vision on initial insertion, with sustained effects on low-contrast VA and QoV scores but not high-contrast VA. Thus, high-contrast VA is not a suitable surrogate for quality of vision. In prescribing MF SCLs for myopia control, clinicians should educate patients about these effects on vision. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

41 CFR 51-2.4 - Determination of suitability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Determination of suitability. 51-2.4 Section 51-2.4 Public Contracts and Property Management Other Provisions Relating to... performed and that it will have the capability to meet Government quality standards and delivery schedules...

41 CFR 51-2.4 - Determination of suitability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 41 Public Contracts and Property Management 1 2011-07-01 2009-07-01 true Determination of suitability. 51-2.4 Section 51-2.4 Public Contracts and Property Management Other Provisions Relating to... performed and that it will have the capability to meet Government quality standards and delivery schedules...

Landscape habitat suitability index software

Treesearch

William D. Dijak; Chadwick D. Rittenhouse; Michael A. Larson; Frank R. III Thompson; Joshua J. Millspaugh

2007-01-01

Habitat suitability index (HSI) models are traditionally used to evaluate habitat quality for wildlife at a local scale. Rarely have such models incorporated spatial relationships of habitat components. We introduce Landscape HSImodels, a new Microsoft Windowst (Microsoft, Redmond, WA)-based program that incorporates local habitat as well as landscape-scale attributes...

Brief dynamic psychotherapy : patient suitability, treatment length, and outcome.

PubMed

Høglend, P; Sørlie, T; Heyerdahl, O; Sørbye, O; Amlo, S

1993-01-01

Forty-three neurotic outpatients were treated according to common practice with dynamic psychotherapy of brief to moderate length. Suitability for brief dynamic psychotherapy, measured by quality of interpersonal relations, was independent of DSM-III diagnoses. Suitability was a significant direct predictor of symptomatic and dynamic change 2 and 4 years after therapy. Treatment length added no explained outcome variance over patient characteristics. However, patients with high suitability had a relatively more favorable dynamic outcome with a brief, focused treatment approach, whereas patients with low suitability had relatively more favorable outcome with a longer, less focused treatment of more than 1 year's duration. The significant interaction emerged at 4-year follow-up.

Design and pilot evaluation of the RAH-66 Comanche selectable control modes

NASA Technical Reports Server (NTRS)

Gold, Phillip J.; Dryfoos, James B.

1993-01-01

The RAH-66 Comanche helicopter has been designed to possess superior handling qualities over a wide range of flight conditions. The control laws have been tailored to satisfy the requirements of ADS-33C and the Weapon System Specification (WSS). This paper addresses the design of the Comanche Selectable Mode control laws (Velocity Stabilization/Hover Hold and Altitude Hold), which provide the additional stabilization and control augmentation needed when flying in a Degraded Visual Environment (DVE). An overview of the RAH-66 control laws is presented, including a detailed description of the Selectable Modes design. The primary focus of this paper is the results of piloted evaluation of these control laws in the Boeing motionbase simulator. These tests substantiate the detailed design of the Comanche Selectable Mode control laws. All tested DVE tasks (ADS-33C, sections 4.4 and 4.5) were rated Level 1. Other evaluation tasks confirmed the mission suitability of the control system. These control laws are ready for formal ADS-33C compliance testing in the Sikorsky Full Mission Simulator (FMS).

Evaluating the beam quality of double-cladding fiber lasers in applications.

PubMed

Yan, Ping; Wang, Xuejiao; Gong, Mali; Xiao, Qirong

2016-08-10

We put forward a new β_FL factor, which is used exclusively in fiber lasers and is suitable to assess beam quality and choose the LP₀₁ mode as the new suitable ideal beam. We present a new simple measurement method and verify the reasonability of the β_FL factor in experiment in a 20/400 μm fiber laser. Furthermore, we use the β_FL factor to evaluate the beam quality of a 3-kW-level fiber laser. It can be concluded that β_FL is a key factor not only for assessing the performance of the high-power fiber laser that is our main focus, but also for the simple measurement.

Groundwater quality assessment for domestic and agriculture purposes in Puducherry region

NASA Astrophysics Data System (ADS)

Sridharan, M.; Senthil Nathan, D.

2017-11-01

Totally about 174 groundwater samples have been collected during pre-monsoon and post-monsoon season to study the suitability for domestic and agriculture purposes along the coastal aquifers of Puducherry region. Parameters such as pH, total dissolved solids (TDS), electrical conductivity (EC), sodium (Na), potassium (K), calcium (Ca), magnesium (Mg), bicarbonate (HCO3), chloride (Cl) and sulfate (SO4) were analyzed to assess the suitability of groundwater for domestic purposes. Sodium adsorption ratio (SAR), magnesium adsorption ratio (MAR), residual sodium bicarbonate (RSC), soluble sodium percentage (Na%), permeability index (PI) and chlorinity index were assessed for irrigation purposes. The higher concentration of ions such as Na, Ca, Cl and So4 indicates seawater intrusion, mineral dissolution, intense agricultural practices and improper sewage disposal. The level of EC, TDS and hardness in the water samples indicates that maximum of them are suitable for drinking and domestic purposes. The parameters such as SAR, Na%, PI, MAR and Chlorinity index indicates that majority of water sample are very good to moderately suitable for agriculture. In pre-monsoon, RSC of about 5.7% of samples was higher which when used for a longer time alter the soil properties and reduce crop production. Wilcox diagram suggests that water samples are of medium saline to low sodium type indicating that groundwater is suitable for irrigation. Temporal variation of groundwater quality shows significant increasing trend in EC, TDS and ions like Mg, K and Cl in the last decade, mainly due to anthropogenic activities with little geogenic impact in the quality of groundwater.

Atlantic Ocean CARINA data: overview and salinity adjustments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanhua, T.; Steinfeldt, R.; Key, Robert

2010-01-01

Water column data of carbon and carbon-relevant hydrographic and hydrochemical parameters from 188 previously non-publicly available cruise data sets in the Arctic Mediterranean Seas, Atlantic and Southern Ocean have been retrieved and merged into a new database: CARINA (CARbon dioxide IN the Atlantic Ocean). The data have gone through rigorous quality control procedures to assure the highest possible quality and consistency. The data for the pertinent parameters in the CARINA database were objectively examined in order to quantify systematic differences in the reported values, i.e. secondary quality control. Systematic biases found in the data have been corrected in the threemore » data products: merged data files with measured, calculated and interpolated data for each of the three CARINA regions, i.e. the Arctic Mediterranean Seas, the Atlantic and the Southern Ocean. These products have been corrected to be internally consistent. Ninety-eight of the cruises in the CARINA database were conducted in the Atlantic Ocean, defined here as the region south of the Greenland-Iceland-Scotland Ridge and north of about 30 S. Here we present an overview of the Atlantic Ocean synthesis of the CARINA data and the adjustments that were applied to the data product. We also report the details of the secondary QC (Quality Control) for salinity for this data set. Procedures of quality control including crossover analysis between stations and inversion analysis of all crossover data are briefly described. Adjustments to salinity measurements were applied to the data from 10 cruises in the Atlantic Ocean region. Based on our analysis we estimate the internal consistency of the CARINA-ATL salinity data to be 4.1 ppm. With these adjustments the CARINA data products are consistent both internally was well as with GLODAP data, an oceanographic data set based on the World Hydrographic Program in the 1990s, and is now suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation.« less

Atlantic Ocean CARINA data: overview and salinity adjustments

NASA Astrophysics Data System (ADS)

Tanhua, T.; Steinfeldt, R.; Key, R. M.; Brown, P.; Gruber, N.; Wanninkhof, R.; Perez, F.; Körtzinger, A.; Velo, A.; Schuster, U.; van Heuven, S.; Bullister, J. L.; Stendardo, I.; Hoppema, M.; Olsen, A.; Kozyr, A.; Pierrot, D.; Schirnick, C.; Wallace, D. W. R.

2010-02-01

Water column data of carbon and carbon-relevant hydrographic and hydrochemical parameters from 188 previously non-publicly available cruise data sets in the Arctic Mediterranean Seas, Atlantic and Southern Ocean have been retrieved and merged into a new database: CARINA (CARbon dioxide IN the Atlantic Ocean). The data have gone through rigorous quality control procedures to assure the highest possible quality and consistency. The data for the pertinent parameters in the CARINA database were objectively examined in order to quantify systematic differences in the reported values, i.e. secondary quality control. Systematic biases found in the data have been corrected in the three data products: merged data files with measured, calculated and interpolated data for each of the three CARINA regions, i.e. the Arctic Mediterranean Seas, the Atlantic and the Southern Ocean. These products have been corrected to be internally consistent. Ninety-eight of the cruises in the CARINA database were conducted in the Atlantic Ocean, defined here as the region south of the Greenland-Iceland-Scotland Ridge and north of about 30° S. Here we present an overview of the Atlantic Ocean synthesis of the CARINA data and the adjustments that were applied to the data product. We also report the details of the secondary QC (Quality Control) for salinity for this data set. Procedures of quality control - including crossover analysis between stations and inversion analysis of all crossover data - are briefly described. Adjustments to salinity measurements were applied to the data from 10 cruises in the Atlantic Ocean region. Based on our analysis we estimate the internal consistency of the CARINA-ATL salinity data to be 4.1 ppm. With these adjustments the CARINA data products are consistent both internally as well as with GLODAP data, an oceanographic data set based on the World Hydrographic Program in the 1990s, and is now suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation.

Cranberry Wilderness study area, West Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meissner, C.R. Jr.; Mory, P.C.

1984-01-01

The Cranberry Wilderness study area contains a large demonstrated resource of bituminous coal of coking quality according to studies made in 1977. Demonstrated coal resources in beds more than 14 in. thick are about 110 million short tons of which 56.5 million tons are in beds more than 28 in. thick in areas of substantiated coal resource potential. Other mineral resources in the study area include peat, shale and clay suitable for building brick and lightweight aggregate, sandstone suitable for low-quality glass sand, and sandstone suitable for construction material. These commodities are found in abundance in other areas throughout themore » State. Study of the drill-hole data did not reveal indications of a potential for oil and gas resources in the study area. Evidence of metallic mineral potential was not found during this investigation.« less

A Software for soil quality conservation at organic waste disposal areas: The case of olive mill and pistachio wastes.

NASA Astrophysics Data System (ADS)

Doula, Maria; Sarris, Apostolos; Papadopoulos, Nikos; Hliaoutakis, Aggelos; Kydonakis, Aris; Argyriou, Lemonia; Theocharopoulos, Sid; Kolovos, Chronis

2016-04-01

For the sustainable reuse of organic wastes at agricultural areas, apart from extensive evaluation of waste properties and characteristics, it is of significant importance, in order to protect soil quality, to evaluate land suitability and estimate the correct application doses prior waste landspreading. In the light of this precondition, a software was developed that integrates GIS maps of land suitability for waste reuse (wastewater and solid waste) and an algorithm for waste doses estimation in relation to soil analysis, and in case of reuse for fertilization with soil analysis, irrigation water quality and plant needs. EU and legislation frameworks of European Member States are also considered for the assessment of waste suitability for landspreading and for the estimation of the correct doses that will not cause adverse effects on soil and also to underground water (e.g. Nitrate Directive). Two examples of software functionality are presented in this study using data collected during two LIFE projects, i.e. Prosodol for landspreading of olive mill wastes and AgroStrat for pistachio wastes.

Groundwater chemistry evaluation for drinking and irrigation utilities in east Wasit province, Central Iraq

NASA Astrophysics Data System (ADS)

Ghalib, Hussein B.

2017-11-01

The present study focused on assessing the groundwater quality of the shallow aquifer in the northeastern Wasit Governorate, Iraq. The physicochemical parameters, including major cation and anion compositions, pH, total dissolved solid and electrical conductivity, were used to assess the suitability of groundwater quality for drinking purpose by comparing with the WHO and Iraqi standards. Total dissolved solid (TDS), sodium adsorption ratio, residual sodium bicarbonate, permeability index and magnesium ratio were used for irrigation suitability assessment. For this purpose, 98 samples were collected from the scattered shallow wells in the study area. Results indicated that the spatial distribution of TDS, EC values and major ions in these groundwater samples considerably differ from one site to another mainly due to the lithological variations of the area. The results are correlated with standards classifications to deduce the hydrogeo-chemical phenomena. The dominant factors in controlling the groundwater hydrogeochemistry are evaporation and weathering in the study area. Geochemical modelling approach was used to calculate the saturation state of some selected minerals, i.e., explaining the dissolution and precipitation reactions occurring in the groundwater. The studied groundwater samples were found to be oversaturated with carbonate minerals and undersaturated with evaporates minerals. A comparison of groundwater quality in relation to drinking water standards showed that most of the groundwater samples were unsuitable for drinking purposes. On the other hand, most groundwater is unsuitable for irrigation purposes based on sodium and salinity hazards. However, soil type as well as proper selection of plants should be taken into consideration.

[Evaluation of drinking-water treatment by Lifestraw® and Ceramic-pot filters].

PubMed

Pérez-Vidal, Andrea; Díaz-Gómez, Jaime; Salamanca-Rojas, Karen L; Rojas-Torres, Leidy Y

2016-04-01

Objective To evaluate under laboratory conditions, the removal efficiency of turbidity and E. coli of two household water filters: LifeStraw® family (MF) and ceramic pot filter (CPF). Methods The two systems were operated over 6 months using two identical control units per system, treating 7.5 L/d of a synthetic substrate used as raw water. The turbidity of the substrate was adjusted with Kaolinite and the E. coli concentration, with a replica of the ATCC 95922 strain. The differences of effluent quality of the systems, in terms of turbidity and E. coli, were evaluated with Analysis of Variance (ANOVA). Operative and maintenance aspects, that could limit or enhance the use of the systems, were also considered in the evaluation. Results The water synthetic substrate quality had an average of 32.2 ± 2.8 NTU for turbidity and 3,9x105 UFC/100 mL for E. coli. Both systems reduce the turbidity to values below 2 NTU with an inactivation of 100 % of E. coli. Statistical differences were found between the systems in terms of turbidity removal, MF being more efficient than the CPF (99,2 ± 0.4 % and 97.6 % ± 1.14, respectively). Conclusions Both systems are suitable for household water supply treatment, acheiving the water quality standards established by Colombian regulations. The MF was more efficient for suspended solids removal and filtration rate, but when economic, operative, and maintenance aspects along with social acceptability and lifespan are considered, the CPF seems more suitable, especially in rural areas.

Research on the Purification Effect of Aquatic Plants Based on Grey Clustering Method

NASA Astrophysics Data System (ADS)

Gu, Sudan; Du, Fuhui

2018-01-01

This paper uses the grey clustering method to evaluate the water quality level of the MingGuan constructed wetland at the import and export of artificial wetlands. Constructed wetland of Ming Guanis established on the basis of the Fuyang River’s water quality improvement, to choose suitable aquatic plants, in order to achieve the Fuyang River water purification effect. Namely TP, TN, NH3-N, DO, COD and COMMn and permanganate index are selected as clustering indicators. Water quality is divided into five grades according to the Surface Water Environmental Quality Standard (GB3838-2002) as the evaluation standard. In order to select the suitable wetland plants, the purification effect of 6 kinds of higher aquatic plants on the sewage of fuyang river was tested. one kind of plants was selected: Typha. The results show that the water quality of the section is gradually changed from V water quality to III water quality. After tartificial wetland of cycle for a long time, Typha has good purification effect. In November, water quality categories are basically concentrated in the VI, V class, may be caused by chemical decomposition of aquatic plants, should strengthen the academic research.

Image quality assessment metric for frame accumulated image

NASA Astrophysics Data System (ADS)

Yu, Jianping; Li, Gang; Wang, Shaohui; Lin, Ling

2018-01-01

The medical image quality determines the accuracy of diagnosis, and the gray-scale resolution is an important parameter to measure image quality. But current objective metrics are not very suitable for assessing medical images obtained by frame accumulation technology. Little attention was paid to the gray-scale resolution, basically based on spatial resolution and limited to the 256 level gray scale of the existing display device. Thus, this paper proposes a metric, "mean signal-to-noise ratio" (MSNR) based on signal-to-noise in order to be more reasonable to evaluate frame accumulated medical image quality. We demonstrate its potential application through a series of images under a constant illumination signal. Here, the mean image of enough images was regarded as the reference image. Several groups of images by different frame accumulation and their MSNR were calculated. The results of the experiment show that, compared with other quality assessment methods, the metric is simpler, more effective, and more suitable for assessing frame accumulated images that surpass the gray scale and precision of the original image.

A quality-refinement process for medical imaging applications.

PubMed

Neuhaus, J; Maleike, D; Nolden, M; Kenngott, H-G; Meinzer, H-P; Wolf, I

2009-01-01

To introduce and evaluate a process for refinement of software quality that is suitable to research groups. In order to avoid constraining researchers too much, the quality improvement process has to be designed carefully. The scope of this paper is to present and evaluate a process to advance quality aspects of existing research prototypes in order to make them ready for initial clinical studies. The proposed process is tailored for research environments and therefore more lightweight than traditional quality management processes. Focus on quality criteria that are important at the given stage of the software life cycle. Usage of tools that automate aspects of the process is emphasized. To evaluate the additional effort that comes along with the process, it was exemplarily applied for eight prototypical software modules for medical image processing. The introduced process has been applied to improve the quality of all prototypes so that they could be successfully used in clinical studies. The quality refinement yielded an average of 13 person days of additional effort per project. Overall, 107 bugs were found and resolved by applying the process. Careful selection of quality criteria and the usage of automated process tools lead to a lightweight quality refinement process suitable for scientific research groups that can be applied to ensure a successful transfer of technical software prototypes into clinical research workflows.

Automated monitoring of recovered water quality

NASA Technical Reports Server (NTRS)

Misselhorn, J. E.; Hartung, W. H.; Witz, S. W.

1974-01-01

Laboratory prototype water quality monitoring system provides automatic system for online monitoring of chemical, physical, and bacteriological properties of recovered water and for signaling malfunction in water recovery system. Monitor incorporates whenever possible commercially available sensors suitably modified.

Engineering Interfacial Processes at Mini-Micro-Nano Scales Using Sessile Droplet Architecture.

PubMed

Bansal, Lalit; Sanyal, Apratim; Kabi, Prasenjit; Pathak, Binita; Basu, Saptarshi

2018-03-01

Evaporating sessile functional droplets act as the fundamental building block that controls the cumulative outcome of many industrial and biological applications such as surface patterning, 3D printing, photonic crystals, and DNA sequencing, to name a few. Additionally, a drying single sessile droplet forms a high-throughput processing technique using low material volume which is especially suitable for medical diagnosis. A sessile droplet also provides an elementary platform to study and analyze fundamental interfacial processes at various length scales ranging from macroscopically observable wetting and evaporation to microfluidic transport to interparticle forces operating at a nanometric length scale. As an example, to ascertain the quality of 3D printing we must understand the fundamental interfacial processes at the droplet scale. In this article, we review the coupled physics of evaporation flow-contact-line-driven particle transport in sessile colloidal droplets and provide methodologies to control the same. Through natural alterations in droplet vaporization, one can change the evaporative pattern and contact line dynamics leading to internal flow which will modulate the final particle assembly in a nontrivial fashion. We further show that control over particle transport can also be exerted by external stimuli which can be thermal, mechanical oscillations, vapor confinement (walled or a fellow droplet), or chemical (surfactant-induced) in nature. For example, significant augmentation of an otherwise evaporation-driven particle transport in sessile droplets can be brought about simply through controlled interfacial oscillations. The ability to control the final morphologies by manipulating the governing interfacial mechanisms in the precursor stages of droplet drying makes it perfectly suitable for fabrication-, mixing-, and diagnostic-based applications.

Regionalization of Chinese Material Medical Quality Based on Maximum Entropy Model: A case study of Atractylodes lancea

NASA Astrophysics Data System (ADS)

Shoudong, Zhu; Huasheng, Peng; Lanping, Guo; Tongren, Xu; Yan, Zhang; Meilan, Chen; Qingxiu, Hao; Liping, Kang; Luqi, Huang

2017-02-01

Atractylodes is an East-Asiatic endemic genera that distributed in China, Japan and Russian Far Eastern. As an important resource of medicinal plant, atractylodes has long been used as herbal medicine. To example the significant features in its trueborn quality and geographical distribution, we explored the relationships between medicine quality and habitat suitability in two classifications-lower atractylodin content than the standard of Chinese Pharmacopoeia (2010) and the other has higher content. We found that the atractylodin content is negatively related to the habitat suitability for atractylodes with lower atractylodin, while the atractylodin content is positively related to the habitat suitability for those with higher atractylodin. By analyzing the distribution of atractylodeswith lower atractylodin content than the standard of Pharmacopeia, we discovered that the main ecological factors that could inhibit the accumulation of atractylodin were soil type (39.7%), soil clay content (26.7%), mean temperature in December (22.3%), Cation-exchange capacity (6%), etc. And these ecological factors promoted the accumulation of atractylodin for the atractylodes with higher atractylodin. By integrating the two classifications, we finally predicted the distribution of atractylodin content in China.Our results realized the query of atractylodes quality in arbitrary coordinates, and satisfied the actually cultivation demands of “Planting area based on atractylodin quality”.

Qualitative Exploration of the Suitability of Capability Based Instruments to Measure Quality of Life in Family Carers of People with Dementia

PubMed Central

Jones, Carys; Edwards, Rhiannon Tudor; Hounsome, Barry

2014-01-01

Background. In an ageing population, many individuals find themselves becoming a carer for an elderly relative. This qualitative study explores aspects of quality of life affected by caring for a person with dementia, with the aim of identifying whether capability based questionnaires are suitable for measuring carer quality of life. Methods. Semistructured interviews lasting up to an hour were conducted, November 2010–July 2011, with eight family carers of people with dementia. Interviews typically took place at the participants' homes and were recorded and transcribed verbatim. Framework analysis was used to code and analyse data. Domains from three capability based questionnaires (ICECAP-O, Carer Experience Scale, and ASCOT) were used as initial codes. Similar codes were grouped into categories, and broader themes were developed from these categories. Results. Four themes were identified: social network and relationships; interactions with agencies; recognition of role; and time for oneself. Conclusions. By identifying what affects carers' quality of life, an appropriate choice can be made when selecting instruments for future carer research. The themes identified had a high degree of overlap with the capability instruments, suggesting that the capabilities approach would be suitable for future research involving carers of people with dementia. PMID:24967332

The influence of social networking web sites on the evaluation of job candidates.

PubMed

Bohnert, Daniel; Ross, William H

2010-06-01

This study investigated how the content of social networking Web site (SNW) pages influenced others' evaluation of job candidates. Students (N = 148) evaluated the suitability of hypothetical candidates for an entry-level managerial job. A 2 x 4 design was employed: résumés were either marginally qualified or well qualified for the job. SNW printouts reflected (a) an emphasis on drinking alcohol, (b) a family orientation, or (c) a professional orientation; participants in a control group received no Web page information. In addition to a main effect for résumé quality, applicants with either a family-oriented or a professional-oriented SNW were seen as more suitable for the job and more conscientious than applicants with alcohol-oriented SNW pages. They were more likely to be interviewed. If hired, they were also likely to be offered significantly higher starting salaries. Results are discussed in terms of implications for both managers and applicants.

Discriminative Dissolution Method for Benzoyl Metronidazole Oral Suspension.

PubMed

da Silva, Aline Santos; da Rosa Silva, Carlos Eduardo; Paula, Fávero Reisdorfer; da Silva, Fabiana Ernestina Barcellos

2016-06-01

A dissolution method for benzoyl metronidazole (BMZ) oral suspensions was developed and validated using a high-performance liquid chromatography (HPLC) method. After determination of sink conditions, dissolution profiles were evaluated using different dissolution media and agitation speeds. The sample insertion mode in dissolution media was also evaluated. The best conditions were obtained using a paddle, 50 rpm stirring speed, simulated gastric fluid (without pepsin) as the dissolution medium, and sample insertion by a syringe. These conditions were suitable for providing sink conditions and discriminatory power between different formulations. Through the tested conditions, the results can be considered specific, linear, precise, accurate, and robust. The dissolution profiles of five samples were compared using the similarity factor (f 2) and dissolution efficiency. The dissolution kinetics were evaluated and described by the Weibull model. Whereas there is no monograph for this pharmaceutical formulation, the dissolution method proposed can be considered suitable for quality control and dissolution profile comparison of different commercial formulations.

Beer fermentation: monitoring of process parameters by FT-NIR and multivariate data analysis.

PubMed

Grassi, Silvia; Amigo, José Manuel; Lyndgaard, Christian Bøge; Foschino, Roberto; Casiraghi, Ernestina

2014-07-15

This work investigates the capability of Fourier-Transform near infrared (FT-NIR) spectroscopy to monitor and assess process parameters in beer fermentation at different operative conditions. For this purpose, the fermentation of wort with two different yeast strains and at different temperatures was monitored for nine days by FT-NIR. To correlate the collected spectra with °Brix, pH and biomass, different multivariate data methodologies were applied. Principal component analysis (PCA), partial least squares (PLS) and locally weighted regression (LWR) were used to assess the relationship between FT-NIR spectra and the abovementioned process parameters that define the beer fermentation. The accuracy and robustness of the obtained results clearly show the suitability of FT-NIR spectroscopy, combined with multivariate data analysis, to be used as a quality control tool in the beer fermentation process. FT-NIR spectroscopy, when combined with LWR, demonstrates to be a perfectly suitable quantitative method to be implemented in the production of beer. Copyright © 2014 Elsevier Ltd. All rights reserved.

Determination of toxic elements in yerba mate by ICP-MS after diluted acid digestion under O2 pressure.

PubMed

Pardinho, Renan B; Dalla Vecchia, Paula; Mendes, Ana L G; Bizzi, Cezar A; Mello, Paola A; Duarte, Fabio A; Flores, Erico M M

2018-10-15

In this work, a procedure allowing effective digestion of a high mass of yerba mate (up to 1500 mg) using diluted HNO 3, in a system pressurized with oxygen, is proposed. Digests were suitable for direct analysis by ICP-MS, virtually free of interferences. Digestion was performed using 7 mol l -1 HNO 3 and 8 bar O 2 . The digestion efficiency was better than 92% and digests presented a relatively low acidity (<10 mmol HNO 3 ). The limit of quantification was 4.0, 1.0 and 1.0 ng g -1 for As, Cd and Pb, respectively. Under optimized conditions up to 1500 mg of sample were digested and no interferences were observed during analyses by ICP-MS, making this approach suitable for routine determination of As, Cd and Pb in yerba mate and also in agreement with the quality control requirements. Copyright © 2018 Elsevier Ltd. All rights reserved.

High performance liquid chromatography used for quality control of Achyranthis Radix.

PubMed

Zhao, Bing Tian; Jeong, Su Yang; Moon, Dong Cheul; Son, Kun Ho; Son, Jong Keun; Woo, Mi Hee

2012-08-01

To establish a standard of quality control and to identify reliable Achyranthis Radix, three phytoecdysones including ecdysterone (1), 25R-inokosterone (2) and 25S-inokosterone (3) were determined by quantitative HPLC/UV analysis. Three phytoecdysones were separated with an YMC J'sphere ODS C(18) column (250 mm × 4.6 mm, 4 μm) by isocratic elution using 0.1% formic acid in water and acetonitrile (85:15, v/v%) as the mobile phase. The flow rate was 1.0 mL/min and the UV detector wavelength was set at 245 nm. The standards were quantified by HPLC/UV from Achyranthes bidentata Blume and Achyranthes japonica Nakai, as well as Cyathula capitata Moq. and Cyathula officinalis Kuan, which are of a different genus but are comparative herbs. The method was successfully used in the analysis of Achyranthis Radix of different geographical origin or genera with relatively simple conditions and procedures, and the assay results were satisfactory for linearity, recovery, precision, accuracy, stability and robustness. The HPLC analytical method for pattern recognition analysis was validated by repeated analysis of eighteen A. bidentata Blume samples and ten A. japonica Nakai samples. The results indicate that the established HPLC/UV method is suitable for quantitation and pattern recognition analyses for quality evaluation of Achyranthis Radix.

Effects of tartary buckwheat polysaccharide combined with nisin edible coating on the storage quality of tilapia (Oreochromis niloticus) fillets.

PubMed

Wang, Fengping; Zhang, Huijun; Jin, Wengang; Li, Lirong

2018-06-01

To investigate the effect of tartary buckwheat polysaccharide (TBP) combined with nisin edible coatings on the preservation of tilapia (Oreochromis niloticus) fillets, fillets were dip treated with different concentrations of TBP (5, 10 and 15 g kg -1 ) combined with nisin and stored at 4 °C for 12 days. The pH values, thiobarbituric acid contents, total volatile base nitrogen (TVB-N) content, total viable count (TVC), surface colors, textures and sensory properties of the tilapia fillets at storage were all periodically investigated. TBP combined with nisin-treated groups significantly improved the bacteriological, physicochemical, and sensory characteristics of the tilapia fillets to a greater extent compared to the control group and presented better quality preservation effects than nisin coating alone. Based on the limits of the TVB-N, TVC and sensory scores, the shelf life of the control tilapia fillets was 4 days, whereas that for nisin with TBP-coated fillets was 8-10 days. Edible coatings made from TBP combined with nisin are suitable for maintaining qualities and enhancing the shelf lives of tilapia fillets stored at 4 °C. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

A new validated method for the simultaneous determination of benzocaine, propylparaben and benzyl alcohol in a bioadhesive gel by HPLC.

PubMed

Pérez-Lozano, P; García-Montoya, E; Orriols, A; Miñarro, M; Ticó, J R; Suñé-Negre, J M

2005-10-04

A new HPLC-RP method has been developed and validated for the simultaneous determination of benzocaine, two preservatives (propylparaben (nipasol) and benzyl alcohol) and degradation products of benzocaine in a semisolid pharmaceutical dosage form (benzocaine gel). The method uses a Nucleosil 120 C18 column and gradient elution. The mobile phase consisted of a mixture of methanol and glacial acetic acid (10%, v/v) at different proportion according to a time-schedule programme, pumped at a flow rate of 2.0 ml min(-1). The DAD detector was set at 258 nm. The validation study was carried out fulfilling the ICH guidelines in order to prove that the new analytical method, meets the reliability characteristics, and these characteristics showed the capacity of analytical method to keep, throughout the time, the fundamental criteria for validation: selectivity, linearity, precision, accuracy and sensitivity. The method was applied during the quality control of benzocaine gel in order to quantify the drug (benzocaine), preservatives and degraded products and proved to be suitable for rapid and reliable quality control method.

An overview of the use of compression in lower-limb chronic oedema.

PubMed

Elwell, Rebecca

2016-01-01

Chronic oedema in the lower limbs can be a debilitating condition and has a negative effect on a patient's quality of life. As yet, there is no known cure for this condition; however, it can be controlled and managed, and its recurrence can be prevented. One of the most common and successful ways of managing this condition is the use of compression hosiery. With an expanding knowledge base of compression hosiery, lymphoedema specialists are now able to address historical problems of poor fit and concordance. Moreover, there is a wide choice of garments available today for clinicians to use, that not only help to control and treat the oedema, but have also improved patients' quality of life because the garments are comfortable and inconspicuous. Evidence has shown that concordance is greatly increased when patients participate in their treatment and help to decide on the most suitable garment for themselves. This article gives an overview of the use of compression garments when treating lower-limb chronic oedema in patients, and explains the aspects to bear in mind when choosing and prescribing compression hosiery.

An Improved LC-MS/MS Method for Simultaneous Determination of the Eleven Bioactive Constituents for Quality Control of Radix Angelicae Pubescentis and Its Related Preparations

PubMed Central

Li, Jin; Zhang, Qiu-Hong; He, Jun; Liu, Er-wei; Gao, Xiu-mei; Chang, Yan-xu

2015-01-01

An improved LC-MS/MS method was developed for simultaneous determination of eleven bioactive constituents of Radix Angelicae Pubescentis and its related preparations. It was the first report on the quantification of bioactive constituents in different preparations of Radix Angelicae Pubescentis by LC-MS/MS analytical method. These samples were separated with an Agilent Zorbax Extend reversed-phase C18 column (1.8 μm, 4.6 × 100 mm) by linear gradient elution using aqueous ammonium acetate and acetonitrile as mobile phase. The flow rate was 0.3 mL min−1. The eleven bioactive constituents showed good regression (R > 0.990) within test ranges and the recoveries were in the range of 87.1–110%. The limit of detections and quantifications for most of the major constituents were less than 0.5 and 1.0 ng mL−1, respectively. All results indicated that the developed method could be readily utilized as a suitable quality control method for Radix Angelicae Pubescentis and related preparations. PMID:26078992

Catalyst-Free Growth of Three-Dimensional Graphene Flakes and Graphene/g-C₃N₄ Composite for Hydrocarbon Oxidation.

PubMed

Chen, Ke; Chai, Zhigang; Li, Cong; Shi, Liurong; Liu, Mengxi; Xie, Qin; Zhang, Yanfeng; Xu, Dongsheng; Manivannan, Ayyakkannu; Liu, Zhongfan

2016-03-22

Mass production of high-quality graphene flakes is important for commercial applications. Graphene microsheets have been produced on an industrial scale by chemical and liquid-phase exfoliation of graphite. However, strong-interaction-induced interlayer aggregation usually leads to the degradation of their intrinsic properties. Moreover, the crystallinity or layer-thickness controllability is not so perfect to fulfill the requirement for advanced technologies. Herein, we report a quartz-powder-derived chemical vapor deposition growth of three-dimensional (3D) high-quality graphene flakes and demonstrate the fabrication and application of graphene/g-C3N4 composites. The graphene flakes obtained after the removal of growth substrates exhibit the 3D curved microstructure, controllable layer thickness, good crystallinity, as well as weak interlayer interactions suitable for preventing the interlayer stacking. Benefiting from this, we achieved the direct synthesis of g-C3N4 on purified graphene flakes to form the uniform graphene/g-C3N4 composite, which provides efficient electron transfer interfaces to boost its catalytic oxidation activity of cycloalkane with relatively high yield, good selectivity, and reliable stability.

Preparation of a Ytterbium-tagged Gunshot Residue Standard for Quality Control in the Forensic Analysis of GSR.

PubMed

Hearns, Nigel G R; Laflèche, Denis N; Sandercock, Mark L

2015-05-01

Preparation of a ytterbium-tagged gunshot residue (GSR) reference standard for scanning electron microscopy and energy dispersive X-ray spectroscopic (SEM-EDS) microanalysis is reported. Two different chemical markers, ytterbium and neodymium, were evaluated by spiking the primers of 38 Special ammunition cartridges (no propellant, no projectile) and discharging them onto 12.7 mm diameter aluminum SEM pin stubs. Following SEM-EDS microanalysis, the majority of tri-component particles containing lead, barium, and antimony (PbBaSb) were successfully tagged with the chemical marker. Results demonstrate a primer spiked with 0.75% weight percent of ytterbium nitrate affords PbBaSb particles characteristic of GSR with a ytterbium inclusion efficiency of between 77% and 100%. Reproducibility of the method was verified, and durability of the ytterbium-tagged tri-component particles under repeated SEM-EDS analysis was also tested. The ytterbium-tagged PbBaSb particles impart synthetic traceability to a GSR reference standard and are suitable for analysis alongside case work samples, as a positive control for quality assurance purposes. © 2015 American Academy of Forensic Sciences.

Ion mobility spectrometry for food quality and safety.

PubMed

Vautz, W; Zimmermann, D; Hartmann, M; Baumbach, J I; Nolte, J; Jung, J

2006-11-01

Ion mobility spectrometry is known to be a fast and sensitive technique for the detection of trace substances, and it is increasingly in demand not only for protection against explosives and chemical warfare agents, but also for new applications in medical diagnosis or process control. Generally, a gas phase sample is ionized by help of ultraviolet light, ss-radiation or partial discharges. The ions move in a weak electrical field towards a detector. During their drift they collide with a drift gas flowing in the opposite direction and, therefore, are slowed down depending on their size, shape and charge. As a result, different ions reach the detector at different drift times, which are characteristic for the ions considered. The number of ions reaching the detector are a measure of the concentration of the analyte. The method enables the identification and quantification of analytes with high sensitivity (ng l(-1) range). The selectivity can even be increased - as necessary for the analyses of complex mixtures - using pre-separation techniques such as gas chromatography or multi-capillary columns. No pre-concentration of the sample is necessary. Those characteristics of the method are preserved even in air with up to a 100% relative humidity rate. The suitability of the method for application in the field of food quality and safety - including storage, process and quality control as well as the characterization of food stuffs - was investigated in recent years for a number of representative examples, which are summarized in the following, including new studies as well: (1) the detection of metabolites from bacteria for the identification and control of their growth; (2) process control in food production - beer fermentation being an example; (3) the detection of the metabolites of mould for process control during cheese production, for quality control of raw materials or for the control of storage conditions; (4) the quality control of packaging materials during the production of polymeric materials; and (5) the characterization of products - wine being an example. The challenges of such applications were operation in humid air, fast on-line analyses of complex mixtures, high sensitivity - detection limits have to be, for example, in the range of the odour limits - and, in some cases, the necessity of mobile instrumentation. It can be shown that ion mobility spectrometry is optimally capable of fulfilling those challenges for many applications.

The Indicators of the Quality and Changes of Teachers' Work

ERIC Educational Resources Information Center

Fuzi, Beatrix; Suplicz, Sándor

2016-01-01

We present the indicators chosen for the determination of the quality of teacher's work: their popularity, effectiveness and disposition. As part of an empirical research project, their suitability as indicators was examined. It was discussed if a significant change can occur in the teachers' quality spontaneously or as a result of mentoring. To…

Products of steel slags an opportunity to save natural resources.

PubMed

Motz, H; Geiseler, J

2001-01-01

In Germany, and in the most industrial countries, the use of blast furnace and steel slags as an aggregate for civil engineering, for metallurgical use and as fertiliser has a very long tradition. Since the introduction of the basic oxygen steel making furnace (BOF) process and the electric arc furnace (EAF) process the German steel industry started extensive research on the development of fields of application for BOF and EAF slags. These investigations have been mainly performed by Forschungsgemeinschaft Eisenhüttenschlacken e. V. (FEhS), the Research Association for blast furnace and steel slags. Today steel slags are well characterised and long-term experienced materials mainly used as aggregates for road construction (e.g. asphaltic or unbound layers), as armour-stones for hydraulic engineering constructions (e.g. stabilisation of shores), and as fertiliser for agriculture purposes. These multifarious fields of application could only be achieved because the steelworks influence the quality of slags by a careful selection of raw materials and a suitable process route. Furthermore, subsequent procedures like a treatment of the liquid slag, an appropriate heat treatment and a suitable processing have been developed to ensure that the quality of steel slags is always adequate for the end use. Depending on the respective field of application, the suitability of steel slags has to be proven by determining the technical properties, as well as the environmental compatibility. For this reason test methods have been developed to evaluate the technical properties especially the volume stability and the environmental behaviour. To evaluate the volume stability a suitable test (steam test) has been developed and the results from laboratory tests were compared with the behaviour of steel slags under practical conditions, e.g. in a road. To determine the environmental behaviour leaching tests have been developed. In the meanwhile most of these test methods are drafted or already accepted as a CEN standard and are used for a continuous quality control. Usually the suitability of steel slags is stated by fulfilling the requirements of national and/or international standards and regulations. Based on these standards and regulations in Germany in 1998 about 97% of the produced steel slags have been used as aggregates for road construction (e.g. as surface layer, road base and sub base for high trafficked roads), ways, earthworks, and armourstones for hydraulic structures. Consistent to the successful long-term experience not only products of steel slags but also products of blast furnace slags have been eliminated from the European Waste Catalogue and the European Shipment of Waste Regulation of the European Community, as well as from the lists of OECD for transfrontier movements by the decision of the OECD-Council from 21 September, 1995.

Quality of life in old age - a concept analysis.

PubMed

Boggatz, Thomas

2016-03-01

To identify existing definitions of quality of life in old age and to determine the most suitable for evaluating outcomes of nursing care for older adults. Promoting quality of life is a central concern of nursing care for older persons. There is, however, a lack of clarity about the meaning of this concept. Attributes of quality of life are often confused with those factors influencing them. Concept analysis according to Walker and Avant. A search was carried out in the databases MEDLINE, Cumulative Index to Nursing and Allied Health Literature, PsycINFO(®) and Gerolit for the years 1992-2013. Excerpts dealing with definitions, antecedents, consequences and empirical referents of the concept were compiled. Three basic concepts for quality of life were identified: satisfying life conditions, subjective general well-being and subjective fulfilment of dimensions of human life. Satisfying life conditions are antecedent to the other concepts. It is not suitable to view such conditions as an outcome of nursing care for older adults because an outcome has to be a consequence. General well-being is likely to remain stable over time and changing conditions due to adaptation taking place. Fulfilment of dimensions of human life as a multidimensional inner state may be more sensitive to changing conditions. Fulfilment of dimensions of human life is the most suitable definition of quality of life in old age as an outcome of nursing care. Studies are needed to decide whether it is responsive to changing circumstances. Fulfilment of dimensions of human life should be assessed to provide care that meets the needs of clients. © 2015 John Wiley & Sons Ltd.

QCScreen: a software tool for data quality control in LC-HRMS based metabolomics.

PubMed

Simader, Alexandra Maria; Kluger, Bernhard; Neumann, Nora Katharina Nicole; Bueschl, Christoph; Lemmens, Marc; Lirk, Gerald; Krska, Rudolf; Schuhmacher, Rainer

2015-10-24

Metabolomics experiments often comprise large numbers of biological samples resulting in huge amounts of data. This data needs to be inspected for plausibility before data evaluation to detect putative sources of error e.g. retention time or mass accuracy shifts. Especially in liquid chromatography-high resolution mass spectrometry (LC-HRMS) based metabolomics research, proper quality control checks (e.g. for precision, signal drifts or offsets) are crucial prerequisites to achieve reliable and comparable results within and across experimental measurement sequences. Software tools can support this process. The software tool QCScreen was developed to offer a quick and easy data quality check of LC-HRMS derived data. It allows a flexible investigation and comparison of basic quality-related parameters within user-defined target features and the possibility to automatically evaluate multiple sample types within or across different measurement sequences in a short time. It offers a user-friendly interface that allows an easy selection of processing steps and parameter settings. The generated results include a coloured overview plot of data quality across all analysed samples and targets and, in addition, detailed illustrations of the stability and precision of the chromatographic separation, the mass accuracy and the detector sensitivity. The use of QCScreen is demonstrated with experimental data from metabolomics experiments using selected standard compounds in pure solvent. The application of the software identified problematic features, samples and analytical parameters and suggested which data files or compounds required closer manual inspection. QCScreen is an open source software tool which provides a useful basis for assessing the suitability of LC-HRMS data prior to time consuming, detailed data processing and subsequent statistical analysis. It accepts the generic mzXML format and thus can be used with many different LC-HRMS platforms to process both multiple quality control sample types as well as experimental samples in one or more measurement sequences.

Simulation of the XV-15 tilt rotor research aircraft

NASA Technical Reports Server (NTRS)

Churchill, G. B.; Dugan, D. C.

1982-01-01

The effective use of simulation from issuance of the request for proposal through conduct of a flight test program for the XV-15 Tilt Rotor Research Aircraft is discussed. From program inception, simulation complemented all phases of XV-15 development. The initial simulation evaluations during the source evaluation board proceedings contributed significantly to performance and stability and control evaluations. Eight subsequent simulation periods provided major contributions in the areas of control concepts; cockpit configuration; handling qualities; pilot workload; failure effects and recovery procedures; and flight boundary problems and recovery procedures. The fidelity of the simulation also made it a valuable pilot training aid, as well as a suitable tool for military and civil mission evaluations. Simulation also provided valuable design data for refinement of automatic flight control systems. Throughout the program, fidelity was a prime issue and resulted in unique data and methods for fidelity evaluation which are presented and discussed.

Effectiveness of plasma and radical control for the low temperature synthesis and properties of a-SiNx:H films using RF-near microwave PECVD

NASA Astrophysics Data System (ADS)

Sahu, Bibhuti Bhusan; Toyoda, Hirotaka; Han, Jeon Geon

2018-02-01

By mixing and alternating power conditions of radio frequency and microwave plasma sources, a detailed study of a-SiNx:H films in the SiH4/N2 plasma enhanced chemical vapour deposition processes is undertaken. Data reveal a remarkable coherence between the deposition conditions, material's quality, bond densities, optical property, and stoichiometry of the films. The film composition can simply vary from Si-rich to N-rich by incorporating suitable plasma and atomic radical parameters. Highly transparent and wide bandgap films with N to Si and N to H atomic ratios up to ˜2.3 and 3.1, respectively, are prepared by controlling the plasma parameters and radicals. The presented results pave the way for dual frequency PECVD utilization in a-SiNx:H films for their use in controlled-bandgap nanodevices and light emitting applications.

Sequence analysis of the canine mitochondrial DNA control region from shed hair samples in criminal investigations.

PubMed

Berger, C; Berger, B; Parson, W

2012-01-01

In recent years, evidence from domestic dogs has increasingly been analyzed by forensic DNA testing. Especially, canine hairs have proved most suitable and practical due to the high rate of hair transfer occurring between dogs and humans. Starting with the description of a contamination-free sample handling procedure, we give a detailed workflow for sequencing hypervariable segments (HVS) of the mtDNA control region from canine evidence. After the hair material is lysed and the DNA extracted by Phenol/Chloroform, the amplification and sequencing strategy comprises the HVS I and II of the canine control region and is optimized for DNA of medium-to-low quality and quantity. The sequencing procedure is based on the Sanger Big-dye deoxy-terminator method and the separation of the sequencing reaction products is performed on a conventional multicolor fluorescence detection capillary electrophoresis platform. Finally, software-aided base calling and sequence interpretation are addressed exemplarily.

Tamarix as habitat for birds: Implications for riparian restoration in the Southwestern United States

USGS Publications Warehouse

Sogge, M.K.; Sferra, S.J.; Paxton, E.H.

2008-01-01

Exotic vegetation has become a major habitat component in many ecosystems around the world, sometimes dramatically changing the vegetation community structure and composition. In the southwestern United States, riparian ecosystems are undergoing major changes in part due to the establishment and spread of the exotic Tamarix (saltcedar, tamarisk). There are concerns about the suitability of Tamarix as habitat for birds. Although Tamarix habitats tend to support fewer species and individuals than native habitats, Arizona Breeding Bird Atlas data and Birds of North America accounts show that 49 species use Tamarix as breeding habitat. Importantly, the relative use of Tamarix and its quality as habitat vary substantially by geographic location and bird species. Few studies have examined how breeding in Tamarix actually affects bird survivorship and productivity; recent research on Southwestern Willow Flycatchers has found no negative effects from breeding in Tamarix habitats. Therefore, the ecological benefits and costs of Tamarix control are difficult to predict and are likely to be species specific and site specific. Given the likelihood that high-quality native riparian vegetation will not develop at all Tamarix control sites, restoration projects that remove Tamarix but do not assure replacement by high-quality native habitat have the potential to reduce the net riparian habitat value for some local or regional bird populations. Therefore, an assessment of potential negative impacts is important in deciding if exotic control should be conducted. In addition, measurable project objectives, appropriate control and restoration techniques, and robust monitoring are all critical to effective restoration planning and execution. ?? 2008 Society for Ecological Restoration International.

Selecting Digital Children's Books: An Interview Study

ERIC Educational Resources Information Center

Schlebbe, Kirsten

2018-01-01

Introduction: The market for digital children's books is growing steadily. But the options vary in terms of quality and parents looking for suitable apps for young children can get overwhelmed quickly. This study seeks to answer how families search for suitable applications and what aspects are important to them while selecting. Method:…

An Intervention to Assist Students with Writing Their Dissertations and Theses

ERIC Educational Resources Information Center

Singh, S.

2011-01-01

An inadequate number of suitably qualified and experienced supervisors, an increase in the number of students, uncertainty regarding the suitability of supervision and academic rigour in dissertations and theses make it difficult to produce quality graduates within the prescribed time-frame as stipulated by the Department of Education. By…

Air Pollution Monitoring and Use of Nanotechnology Based Solid State Gas Sensors in Greater Cairo Area, Egypt

NASA Astrophysics Data System (ADS)

Ramadan, A. B. A.

Air pollution is a serious problem in thickly populated and industrialized areas in Egypt, especially in greater Cairo area. Economic growth and industrialization are proceeding at a rapid pace, accompanied by increasing emissions of air polluting sources. Furthermore, though the variety and quantities of polluting sources have increased dramatically, the development of a suitable method for monitoring the pollution causing sources has not followed at the same pace. Environmental impacts of air pollutants have impact on public health, vegetation, material deterioration etc. To prevent or minimize the damage caused by atmospheric pollution, suitable monitoring systems are urgently needed that can rapidly and reliably detect and quantify polluting sources for monitoring by regulating authorities in order to prevent further deterioration of the current pollution levels. Consequently, it is important that the current real-time air quality monitoring system, controlled by the Egyptian Environmental Affairs Agency (EEAA), should be adapted or extended to aid in alleviating this problem. Nanotechnology has been applied to several industrial and domestic fields, for example, applications for gas monitoring systems, gas leak detectors in factories, fire and toxic gas detectors, ventilation control, breath alcohol detectors, and the like. Here we report an application example of studying air quality monitoring based on nanotechnology `solid state gas sensors'. So as to carry out air pollution monitoring over an extensive area, a combination of ground measurements through inexpensive sensors and wireless GIS will be used for this purpose. This portable device, comprising solid state gas sensors integrated to a Personal Digital Assistant (PDA) linked through Bluetooth communication tools and Global Positioning System (GPS), will allow rapid dissemination of information on pollution levels at multiple sites simultaneously.

Suitable housing placement: a GIS-based approach.

PubMed

Sorrentino, John A; Meenar, Md Mahbubur R; Flamm, Bradley J

2008-11-01

The intent of this paper is to operationalize some aspects of local sustainability in a suitable development scenario and to compare its energy-use and environmental impacts to trend development. After a discussion of suburban sprawl, local sustainability, and the current state of the Pennypack Creek Watershed in the Philadelphia metro region, these residential location scenarios are presented. The latter were created using geographic information systems software and are based on projections from the Delaware Valley Regional Planning Commission. The impacts of the scenarios on energy use, air emissions, greenhouse gas emissions, water quality, and biological integrity were estimated with very few data, and the effect on the value of generic ecosystem services was assessed. The suitable development scenario was 29% better in terms of energy use and air and greenhouse gas emissions, 2.4% worse on water quality, and 2.6% better with respect to biological integrity. Given its net beneficial results, recommendations for policies to engender suitable development are made, and an outline of an implementation plan is proposed. Thoughts regarding refinements of the present work and the applicability of the methods used here to other watersheds conclude the work.

[Study on ethnic medicine quantitative reference herb,Tibetan medicine fruits of Capsicum frutescens as a case].

PubMed

Zan, Ke; Cui, Gan; Guo, Li-Nong; Ma, Shuang-Cheng; Zheng, Jian

2018-05-01

High price and difficult to get of reference substance have become obstacles to HPLC assay of ethnic medicine. A new method based on quantitative reference herb (QRH) was proposed. Specific chromatograms in fruits of Capsicum frutescens were employed to determine peak positions, and HPLC quantitative reference herb was prepared from fruits of C. frutescens. The content of capsaicin and dihydrocapsaicin in the quantitative control herb was determined by HPLC. Eleven batches of fruits of C. frutescens were analyzed with quantitative reference herb and reference substance respectively. The results showed no difference. The present method is feasible for quality control of ethnic medicines and quantitative reference herb is suitable to replace reference substances in assay. Copyright© by the Chinese Pharmaceutical Association.

Development of high quality pervious concrete specifications for Maryland conditions : [research summary].

DOT National Transportation Integrated Search

2013-02-01

The main objective of the study was to develop preliminary specifications for : high quality pervious concrete suitable for use in SHA projects. The study : included an extensive literature review and laboratory investigations to : determine structur...

Development of high quality pervious concrete specifications for Maryland conditions.

DOT National Transportation Integrated Search

2013-02-01

One of the main objectives of this research was to develop preliminary specifications for high quality : pervious concrete suitable for use in Maryland State Highway Administration (SHA) projects. The study : utilized aggregates that are used in SHA ...

Patient Information Websites About Medically Induced Second-Trimester Abortions: A Descriptive Study of Quality, Suitability, and Issues

PubMed Central

Axelsson, Ove

2017-01-01

Background Patients undergoing medically induced second-trimester abortions feel insufficiently informed and use the Web for supplemental information. However, it is still unclear how people who have experience with pregnancy termination appraise the quality of patient information websites about medically induced second-trimester abortions, whether they consider the websites suitable for patients, and what issues they experience with the websites. Objective Our objective was to investigate the quality of, suitability of, and issues with patient information websites about medically induced second-trimester abortions and potential differences between websites affiliated with the health care system and private organizations. Methods We set out to answer the objective by using 4 laypeople who had experience with pregnancy termination as quality assessors. The first 50 hits of 26 systematic searches were screened (N=1300 hits) using search terms reported by the assessors. Of these hits, 48% (628/1300) were irrelevant and 51% (667/1300) led to websites about medically induced second-trimester abortions. After correcting for duplicate hits, 42 patient information websites were included, 18 of which were affiliated with the health care system and 24 with private organizations. The 4 assessors systematically assessed the websites with the DISCERN instrument (total score range 16-80), the Ensuring Quality Information for Patients (EQIP) tool (total score range 0-100), as well as questions concerning website suitability and perceived issues. Results The interrater reliability was 0.8 for DISCERN and EQIP, indicating substantial agreement between the assessors. The total mean score was 36 for DISCERN and 40 for EQIP, indicating poor overall quality. Websites from the health care system had greater total EQIP (45 vs 37, P>.05) and reliability scores (22 vs 20, P>.05). Only 1 website was recommended by all assessors and 57% (24/42) were rated as very unsuitable by at least one assessor. The most reported issues with the websites involved lack of information (76%, 32/42), and poor design (36%, 15/42). Conclusions The high number of irrelevant hits and poor quality of patient information websites are considerable issues that must be addressed and considered when consulting patients awaiting medically induced second-trimester abortions. In clinical encounters, health professionals should initiate discussions concerning websites about medically induced second-trimester abortions and inform patients about the issues and quality deficits associated with these websites. PMID:28073735

A novel method for room temperature distribution and conservation of RNA and DNA reference materials for guaranteeing performance of molecular diagnostics in onco-hematology: A GBMHM study.

PubMed

Cayuela, Jean-Michel; Mauté, Carole; Fabre, Anne-Lise; Nibourel, Olivier; Dulucq, Stéphanie; Delabesse, Eric; Villarèse, Patrick; Hayette, Sandrine; Mozziconacci, Marie-Joelle; Macintyre, Elizabeth

2015-10-01

Performance of methods used for molecular diagnostics must be closely controlled by regular analysis of internal quality controls. However, conditioning, shipping and long lasting storage of nucleic acid controls remain problematic. Therefore, we evaluated the minicapsule-based innovative process developed by Imagene (Evry, France) for implementing DNA and RNA controls designed for clonality assessment of lymphoproliferations and BCR-ABL1 mRNA quantification, respectively. DNA samples were extracted from 12 cell lines selected for giving specific amplifications with most BIOMED-2 PCR tubes. RNA samples were extracted from 8 cell line mixtures expressing various BCR-ABL1 transcript levels. DNA and RNA were encapsulated by Imagene and shipped at room temperature to participating laboratories. Biologists were asked to report quality data of recovered nucleic acids as well as PCR results. Encapsulated nucleic acids samples were easily and efficiently recovered from minicapsules. The expected rearrangements at immunoglobulin, T-cell receptor and BCL2 loci were detected in DNA samples by all laboratories. Quality of RNA was consistent between laboratories and met the criteria requested for quantification of BCR-ABL1 transcripts. Expression levels measured by the 5 laboratories were within ±2 fold interval from the corresponding pre-encapsulation reference value. Moreover aging studies of encapsulated RNA simulating up to 100 years storage at room temperature show no bias in quantitative outcome. Therefore, Imagene minicapsules are suitable for storage and distribution at room temperature of genetic material designed for proficiency control of molecular diagnostic methods based on end point or real-time quantitative PCR. Copyright © 2014 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Suitability assessment of grey water quality treated with an upflow-downflow siliceous sand/marble waste filtration system for agricultural and industrial purposes.

PubMed

Chaabane, Safa; Riahi, Khalifa; Hamrouni, Hédi; Thayer, Béchir Ben

2017-04-01

The present study examines the suitability assessment of an upflow-downflow siliceous sand/marble waste filtration system for treatment and reuse of grey water collected from bathrooms of the student residential complex at the Higher Institute of Engineering Medjez El Bab (Tunisia). Once the optimization of grey water pre-treatment system has been determined, the filtration system was operated at different hydraulic loading rate and media filter proportions in order to assess the suitability of treated grey water for irrigational purpose according to salinity hazard, sodium hazard, magnesium hazard, permeability index, water infiltration rate, and widely used graphical methods. Suitability of the treated grey water for industrial purpose was evaluated in terms of foaming, corrosion, and scaling. Under optimal operational conditions, results reveals that treated grey water samples with an upflow-downflow siliceous sand/marble waste filtration system may be considered as a good and an excellent water quality suitable for irrigation purpose. However, treated grey water was found not appropriate for industrial purpose due to high concentrations of calcium and sodium that can generate foaming and scaling harm to boilers. These results suggest that treated grey water with an upflow-downflow siliceous sand/marble waste filtration system would support production when used as irrigation water.

Silvicolous on a small scale: possibilities and limitations of habitat suitability models for small, elusive mammals in conservation management and landscape planning.

PubMed

Becker, Nina I; Encarnação, Jorge A

2015-01-01

Species distribution and endangerment can be assessed by habitat-suitability modelling. This study addresses methodical aspects of habitat suitability modelling and includes an application example in actual species conservation and landscape planning. Models using species presence-absence data are preferable to presence-only models. In contrast to species presence data, absences are rarely recorded. Therefore, many studies generate pseudo-absence data for modelling. However, in this study model quality was higher with null samples collected in the field. Next to species data the choice of landscape data is crucial for suitability modelling. Landscape data with high resolution and ecological relevance for the study species improve model reliability and quality for small elusive mammals like Muscardinus avellanarius. For large scale assessment of species distribution, models with low-detailed data are sufficient. For regional site-specific conservation issues like a conflict-free site for new wind turbines, high-detailed regional models are needed. Even though the overlap with optimally suitable habitat for M. avellanarius was low, the installation of wind plants can pose a threat due to habitat loss and fragmentation. To conclude, modellers should clearly state the purpose of their models and choose the according level of detail for species and environmental data.

Study of the suitability of a commercial hydroxyapatite powder to obtain sintered compacts for medical applications

NASA Astrophysics Data System (ADS)

Palacio, C.; Jaramillo, D.; Correa, S.; Arroyave, M.

2017-06-01

Hydroxyapatite (HA) is a material widely used by the medical community due to its Ca/P ratio is comparable to the Ca/P ratio of bones and teeth, which promotes osteoinduction and osteoconduction processes when in contact with bone tissue, either as volume piece or coating. This work focuses on studying the quality of the commercial HA powder MKnano-#MKN-HXAP-S12 µm, after processing, to obtain sintered compact discs with suitable physical and chemical characteristics for implants applications. The HA powder was processed through calcination, grinding, pressing and sintering to evaluate the effect of such as procedures in the compacts dics quality. The raw powder was characterized by laser diffraction, SEM, XRF, XRD, TGA and DSC while the characteristics of the obtained compact discs were determined by dilatometry and XRD to identify the sintering temperature range, constituent phases, the amorphous content and the crystallinity degree, parameters that allow determining their suitability for implants applications. Although, it was not possible to obtain sintered compacts with the suitable chemical composition and without fractures, this work allowed to identify the parameters that determine the suitability of a HA powder to obtain sintered compacts for medical applications, as well as the characterization protocol that allows the evaluation of such parameters.

Silvicolous on a Small Scale: Possibilities and Limitations of Habitat Suitability Models for Small, Elusive Mammals in Conservation Management and Landscape Planning

PubMed Central

2015-01-01

Species distribution and endangerment can be assessed by habitat-suitability modelling. This study addresses methodical aspects of habitat suitability modelling and includes an application example in actual species conservation and landscape planning. Models using species presence-absence data are preferable to presence-only models. In contrast to species presence data, absences are rarely recorded. Therefore, many studies generate pseudo-absence data for modelling. However, in this study model quality was higher with null samples collected in the field. Next to species data the choice of landscape data is crucial for suitability modelling. Landscape data with high resolution and ecological relevance for the study species improve model reliability and quality for small elusive mammals like Muscardinus avellanarius. For large scale assessment of species distribution, models with low-detailed data are sufficient. For regional site-specific conservation issues like a conflict-free site for new wind turbines, high-detailed regional models are needed. Even though the overlap with optimally suitable habitat for M. avellanarius was low, the installation of wind plants can pose a threat due to habitat loss and fragmentation. To conclude, modellers should clearly state the purpose of their models and choose the according level of detail for species and environmental data. PMID:25781894

Degraded visual environment image/video quality metrics

NASA Astrophysics Data System (ADS)

Baumgartner, Dustin D.; Brown, Jeremy B.; Jacobs, Eddie L.; Schachter, Bruce J.

2014-06-01

A number of image quality metrics (IQMs) and video quality metrics (VQMs) have been proposed in the literature for evaluating techniques and systems for mitigating degraded visual environments. Some require both pristine and corrupted imagery. Others require patterned target boards in the scene. None of these metrics relates well to the task of landing a helicopter in conditions such as a brownout dust cloud. We have developed and used a variety of IQMs and VQMs related to the pilot's ability to detect hazards in the scene and to maintain situational awareness. Some of these metrics can be made agnostic to sensor type. Not only are the metrics suitable for evaluating algorithm and sensor variation, they are also suitable for choosing the most cost effective solution to improve operating conditions in degraded visual environments.

A new and fast method for preparing high quality lambda DNA suitable for sequencing.

PubMed Central

Manfioletti, G; Schneider, C

1988-01-01

A method is described for the rapid purification of high quality lambda DNA. The method can be used from either liquid or plate lysates and on a small scale or a large scale. It relies on the preadsobtion of all polyanions present in the lysate to an "insoluble" anion-exchange matrix (DEAE or TEAE). Phage particles are then disrupted by combined treatment with EDTA/proteinase K and the resulting DNA is precipitated by the addition of the cationic detergent cetyl (or hexadecyl)-trimethyl ammonium bromide-CTAB ("soluble" anion-exchange matrix). The precipitated CTAB-DNA complex is then exchanged to Na-DNA and ethanol precipitated. The resultant purified DNA is suitable for enzymatic reactions and provides a high quality template for dideoxy-sequence analysis. Images PMID:2966928

Proposing Electronic Health Record Usability Requirements Based on Enriched ISO 9241 Metric Usability Model

PubMed Central

Farzandipour, Mehrdad; Riazi, Hossein; Jabali, Monireh Sadeqi

2018-01-01

Introduction: System usability assessment is among the important aspects in assessing the quality of clinical information technology, especially when the end users of the system are concerned. This study aims at providing a comprehensive list of system usability. Methods: This research is a descriptive cross-sectional one conducted using Delphi technique in three phases in 2013. After experts’ ideas were concluded, the final version of the questionnaire including 163 items in three phases was presented to 40 users of information systems in hospitals. The grading ranged from 0-4. Data analysis was conducted using SPSS software. Those requirements with a mean point of three or higher were finally confirmed. Results: The list of system usability requirements for electronic health record was designed and confirmed in nine areas including suitability for the task (24 items), self-descriptiveness (22 items), controllability (19 questions), conformity with user expectations (25 items), error tolerance (21 items), suitability for individualization (7 items), suitability for learning (19 items), visual clarity (18 items) and auditory presentation (8 items). Conclusion: A relatively comprehensive model including useful requirements for using EHR was presented which can increase functionality, effectiveness and users’ satisfaction. Thus, it is suggested that the present model be adopted by system designers and healthcare system institutions to assess those systems. PMID:29719310

The determination of water quality and metal concentrations of Ampang Hilir Lake, Selangor, Peninsular Malaysia.

PubMed

Said, Khaled S A; Shuhaimi-Othman, M; Ahmad, A K

2012-05-01

A study of water quality parameters (temperature, conductivity, total dissolved solid, dissolved oxygen, pH and water hardness) in Ampang Hilir Lake was conducted in January, April, July and October 2010. The water quality parameters were tested and recorded at different sampling stations chosen randomly using Hydrolab Data Sonde 4 and Surveyor 4 a water quality multi probe (USA). Six metals which were cadmium, chromium, lead, nickel, zinc and copper were determined in five different compartments of the lake namely water, total suspended solids, plankton, sediment and fish. The metals concentration were determined by Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Perkin Elmer Elan, model 9000.The water quality parameters were compared with National Water Quality Standard (NWQS Malaysia) while metal concentrations were compared with Malaysian and international standards. The study shows that water quality parameters are of class 2. This condition is suitable for recreational activities where body contact is allowed and suitable for sensitive fishing activities. Furthermore, metal concentrations were found to be lower than the international standards, therefore toxic effects for these metals would be rarely observed and the adverse effects to aquatic organisms would not frequently occur.

3-D printing provides a novel approach for standardization and reproducibility of freezing devices

PubMed Central

Hu, E; Childress, William; Tiersch, Terrence R.

2017-01-01

Cryopreservation has become an important and accepted tool for long-term germplasm conservation of animals and plants. To protect genetic resources, repositories have been developed with national and international cooperation. For a repository to be effective, the genetic material submitted must be of good quality and comparable to other submissions. However, due to a variety of reasons, including constraints in knowledge and available resources, cryopreservation methods for aquatic species vary widely across user groups which reduces reproducibility and weakens quality control. Herein we describe a standardizable freezing device produced using 3-dimensional (3-D) printing and introduce the concept of network sharing to achieve aggregate high-throughput cryopreservation for aquatic species. The objectives were to: 1) adapt widely available polystyrene foam products that would be inexpensive, portable, and provide adequate work space; 2) develop a design suitable for 3-D printing that could provide multiple configurations, be inexpensive, and easy to use, and 3) evaluate various configurations to attain freezing rates suitable for various common cryopreservation containers. Through this approach, identical components can be accessed globally, and we demonstrated that 3-D printers can be used to fabricate parts for standardizable freezing devices yielding relevant and reproducible cooling rates across users. With standardized devices for freezing, methods and samples can harmonize into an aggregated high-throughput pathway not currently available for aquatic species repository development. PMID:28465185

Does quality of drinking water matter in kidney stone disease: A study in West Bengal, India

PubMed Central

Mitra, Pubali; Pal, Dilip Kumar

2018-01-01

Purpose The combined interaction of epidemiology, environmental exposure, dietary habits, and genetic factors causes kidney stone disease (KSD), a common public health problem worldwide. Because a high water intake (>3 L daily) is widely recommended by physicians to prevent KSD, the present study evaluated whether the quantity of water that people consume daily is associated with KSD and whether the quality of drinking water has any effect on disease prevalence. Materials and Methods Information regarding residential address, daily volume of water consumption, and source of drinking water was collected from 1,266 patients with kidney stones in West Bengal, India. Drinking water was collected by use of proper methods from case (high stone prevalence) and control (zero stone prevalence) areas thrice yearly. Water samples were analyzed for pH, alkalinity, hardness, total dissolved solutes, electrical conductivity, and salinity. Average values of the studied parameters were compared to determine if there were any statistically significant differences between the case and control areas. Results We observed that as many as 53.6% of the patients consumed <3 L of water daily. Analysis of drinking water samples from case and control areas, however, did not show any statistically significant alterations in the studied parameters. All water samples were found to be suitable for consumption. Conclusions It is not the quality of water, rather the quantity of water consumed that matters most in the occurrence of KSD. PMID:29744472

Brief Dynamic Psychotherapy

PubMed Central

HØGLEND, PER; SØRLIE, TORE; HEYERDAHL, OSCAR; SØRBYE, ØYSTEIN; AMLO, SVEIN

1993-01-01

Forty-three neurotic outpatients were treated according to common practice with dynamic psychotherapy of brief to moderate length. Suitability for brief dynamic psychotherapy, measured by quality of interpersonal relations, was independent of DSM-III diagnoses. Suitability was a significant direct predictor of symptomatic and dynamic change 2 and 4 years after therapy. Treatment length added no explained outcome variance over patient characteristics. However, patients with high suitability had a relatively more favorable dynamic outcome with a brief, focused treatment approach, whereas patients with low suitability had relatively more favorable outcome with a longer, less focused treatment of more than 1 year’s duration. The significant interaction emerged at 4-year follow-up. PMID:22700148

Process performance and product quality in an integrated continuous antibody production process.

PubMed

Karst, Daniel J; Steinebach, Fabian; Soos, Miroslav; Morbidelli, Massimo

2017-02-01

Continuous manufacturing is currently being seriously considered in the biopharmaceutical industry as the possible new paradigm for producing therapeutic proteins, due to production cost and product quality related benefits. In this study, a monoclonal antibody producing CHO cell line was cultured in perfusion mode and connected to a continuous affinity capture step. The reliable and stable integration of the two systems was enabled by suitable control loops, regulating the continuous volumetric flow and adapting the operating conditions of the capture process. For the latter, an at-line HPLC measurement of the harvest concentration subsequent to the bioreactor was combined with a mechanistic model of the capture chromatographic unit. Thereby, optimal buffer consumption and productivity throughout the process was realized while always maintaining a yield above the target value of 99%. Stable operation was achieved at three consecutive viable cell density set points (20, 60, and 40 × 10 6 cells/mL), together with consistent product quality in terms of aggregates, fragments, charge isoforms, and N-linked glycosylation. In addition, different values for these product quality attributes such as N-linked glycosylation, charge variants, and aggregate content were measured at the different steady states. As expected, the amount of released DNA and HCP was significantly reduced by the capture step for all considered upstream operating conditions. This study is exemplary for the potential of enhancing product quality control and modulation by integrated continuous manufacturing. Biotechnol. Bioeng. 2017;114: 298-307. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Application of Nemerow Index Method and Integrated Water Quality Index Method in Water Quality Assessment of Zhangze Reservoir

NASA Astrophysics Data System (ADS)

Zhang, Qian; Feng, Minquan; Hao, Xiaoyan

2018-03-01

[Objective] Based on the water quality historical data from the Zhangze Reservoir from the last five years, the water quality was assessed by the integrated water quality identification index method and the Nemerow pollution index method. The results of different evaluation methods were analyzed and compared and the characteristics of each method were identified.[Methods] The suitability of the water quality assessment methods were compared and analyzed, based on these results.[Results] the water quality tended to decrease over time with 2016 being the year with the worst water quality. The sections with the worst water quality were the southern and northern sections.[Conclusion] The results produced by the traditional Nemerow index method fluctuated greatly in each section of water quality monitoring and therefore could not effectively reveal the trend of water quality at each section. The combination of qualitative and quantitative measures of the comprehensive pollution index identification method meant it could evaluate the degree of water pollution as well as determine that the river water was black and odorous. However, the evaluation results showed that the water pollution was relatively low.The results from the improved Nemerow index evaluation were better as the single indicators and evaluation results are in strong agreement; therefore the method is able to objectively reflect the water quality of each water quality monitoring section and is more suitable for the water quality evaluation of the reservoir.

Design and operation of a low-cost and compact autonomous buoy system for use in coastal aquaculture and water quality monitoring.

PubMed

Schmidt, Wiebke; Raymond, David; Parish, David; Ashton, Ian G C; Miller, Peter I; Campos, Carlos J A; Shutler, Jamie D

2018-01-01

The need to ensure future food security and issues of varying estuarine water quality is driving the expansion of aquaculture into near-shore coastal waters. It is prudent to fully evaluate new or proposed aquaculture sites, prior to any substantial financial investment in infrastructure and staffing. Measurements of water temperature, salinity and dissolved oxygen can be used to gain insight into the physical, chemical and biological water quality conditions within a farm site, towards identifying its suitability for farming, both for the stock species of interest and for assessing the potential risk from harmful or toxic algae. The latter can cause closure of shellfish harvesting. Unfortunately, commercial scientific monitoring systems can be cost prohibitive for small organisations and companies to purchase and operate. Here we describe the design, construction and deployment of a low cost (<£ 5000) monitoring buoy suitable for use within a near-shore aquaculture farm or bathing waters. The mooring includes a suite of sensors designed for supporting and understanding variations in near-shore physical, chemical and biological water quality. The system has been designed so that it can be operated and maintained by non-scientific staff, whilst still providing good quality scientific data. Data collected from two deployments totalling 14 months, one in a coastal bay location, another in an estuary, have illustrated the robust design and provided insight into the suitability of these sites for aquaculture and the potential occurrence of a toxin causing algae ( Dinophysis spp.). The instruments maintained good accuracy during the deployments when compared to independent in situ measurements (e.g. RMSE 0.13-0.16 °C, bias 0.03-0.08 °C) enabling stratification and biological features to be identified, along with confirming that the waters were suitable for mussel ( Mytilus spp.) and lobster ( Homarus gammarus ) aquaculture, whilst sites showed conditions agreeable for Dinophysis spp.

A dynamic viticultural zoning to explore the resilience of terroir concept under climate change.

PubMed

Bonfante, A; Monaco, E; Langella, G; Mercogliano, P; Bucchignani, E; Manna, P; Terribile, F

2018-05-15

Climate change (CC) directly influences agricultural sectors, presenting the need to identify both adaptation and mitigation actions that can make local farming communities and crop production more resilient. In this context, the viticultural sector is one of those most challenged by CC due to the need to combine grape quality, grapevine cultivar adaptation and therefore farmers' future incomes. Thus, understanding how suitability for viticulture is changing under CC is of primary interest in the development of adaptation strategies in traditional wine-growing regions. Considering that climate is an essential part of the terroir system, the expected variability in climate change could have a marked influence on terroir resilience with important effects on local farming communities in viticultural regions. From this perspective, the aim of this paper is to define a new dynamic viticultural zoning procedure that is able to integrate the effects of CC on grape quality responses and evaluate terroir resilience, providing a support tool for stakeholders involved in viticultural planning (winegrowers, winegrower consortiums, policy makers etc.). To achieve these aims, a Hybrid Land Evaluation System, combining qualitative (standard Land Evaluation) and quantitative (simulation model) approaches, was applied within a traditional region devoted to high quality wine production in Southern Italy (Valle Telesina, BN), for a specific grapevine cultivar (Aglianico). The work employed high resolution climate projections that were derived under two different IPCC scenarios, namely RCP 4.5 and RCP 8.5. The results obtained indicate that: (i) only 2% of the suitable area of Valle Telesina expresses the concept of terroir resilience orientated towards Aglianico ultra quality grape production; (ii) within 2010-2040, it is expected that 41% of the area suitable for Aglianico cultivation will need irrigation to achieve quality grape production; (iii) by 2100, climate change benefits for the cultivation of Aglianico will decrease, as well as the suitable areas. Copyright © 2017 Elsevier B.V. All rights reserved.

Image quality testing of assembled IR camera modules

NASA Astrophysics Data System (ADS)

Winters, Daniel; Erichsen, Patrik

2013-10-01

Infrared (IR) camera modules for the LWIR (8-12_m) that combine IR imaging optics with microbolometer focal plane array (FPA) sensors with readout electronics are becoming more and more a mass market product. At the same time, steady improvements in sensor resolution in the higher priced markets raise the requirement for imaging performance of objectives and the proper alignment between objective and FPA. This puts pressure on camera manufacturers and system integrators to assess the image quality of finished camera modules in a cost-efficient and automated way for quality control or during end-of-line testing. In this paper we present recent development work done in the field of image quality testing of IR camera modules. This technology provides a wealth of additional information in contrast to the more traditional test methods like minimum resolvable temperature difference (MRTD) which give only a subjective overall test result. Parameters that can be measured are image quality via the modulation transfer function (MTF) for broadband or with various bandpass filters on- and off-axis and optical parameters like e.g. effective focal length (EFL) and distortion. If the camera module allows for refocusing the optics, additional parameters like best focus plane, image plane tilt, auto-focus quality, chief ray angle etc. can be characterized. Additionally, the homogeneity and response of the sensor with the optics can be characterized in order to calculate the appropriate tables for non-uniformity correction (NUC). The technology can also be used to control active alignment methods during mechanical assembly of optics to high resolution sensors. Other important points that are discussed are the flexibility of the technology to test IR modules with different form factors, electrical interfaces and last but not least the suitability for fully automated measurements in mass production.

Enabling the Usability of Earth Science Data Products and Services by Evaluating, Describing, and Improving Data Quality throughout the Data Lifecycle

NASA Astrophysics Data System (ADS)

Downs, R. R.; Peng, G.; Wei, Y.; Ramapriyan, H.; Moroni, D. F.

2015-12-01

Earth science data products and services are being used by representatives of various science and social science disciplines, by planning and decision-making professionals, by educators and learners ranging from primary through graduate and informal education, and by the general public. The diversity of users and uses of Earth science data is gratifying and offers new challenges for enabling the usability of these data by audiences with various purposes and levels of expertise. Users and other stakeholders need capabilities to efficiently find, explore, select, and determine the applicability and suitability of data products and services to meet their objectives and information needs. Similarly, they need to be able to understand the limitations of Earth science data, which can be complex, especially when considering combined or simultaneous use of multiple data products and services. Quality control efforts of stakeholders, throughout the data lifecycle, can contribute to the usability of Earth science data to meet the needs of diverse users. Such stakeholders include study design teams, data producers, data managers and curators, archives, systems professionals, data distributors, end-users, intermediaries, sponsoring organizations, hosting institutions, and others. Opportunities for engaging stakeholders to review, describe, and improve the quality of Earth science data products and services throughout the data lifecycle are identified and discussed. Insight is shared from the development of guidelines for implementing the Group on Earth Observations (GEO) Data Management Principles, the recommendations from the Earth Science Data System Working Group (ESDSWG) on Data Quality, and the efforts of the Information Quality Cluster of the Federation of Earth Science Information Partners (ESIP). Examples and outcomes from quality control efforts of data facilities, such as scientific data centers, that contribute to the usability of Earth science data also are offered.

A Quality-Control-Oriented Database for a Mesoscale Meteorological Observation Network

NASA Astrophysics Data System (ADS)

Lussana, C.; Ranci, M.; Uboldi, F.

2012-04-01

In the operational context of a local weather service, data accessibility and quality related issues must be managed by taking into account a wide set of user needs. This work describes the structure and the operational choices made for the operational implementation of a database system storing data from highly automated observing stations, metadata and information on data quality. Lombardy's environmental protection agency, ARPA Lombardia, manages a highly automated mesoscale meteorological network. A Quality Assurance System (QAS) ensures that reliable observational information is collected and disseminated to the users. The weather unit in ARPA Lombardia, at the same time an important QAS component and an intensive data user, has developed a database specifically aimed to: 1) providing quick access to data for operational activities and 2) ensuring data quality for real-time applications, by means of an Automatic Data Quality Control (ADQC) procedure. Quantities stored in the archive include hourly aggregated observations of: precipitation amount, temperature, wind, relative humidity, pressure, global and net solar radiation. The ADQC performs several independent tests on raw data and compares their results in a decision-making procedure. An important ADQC component is the Spatial Consistency Test based on Optimal Interpolation. Interpolated and Cross-Validation analysis values are also stored in the database, providing further information to human operators and useful estimates in case of missing data. The technical solution adopted is based on a LAMP (Linux, Apache, MySQL and Php) system, constituting an open source environment suitable for both development and operational practice. The ADQC procedure itself is performed by R scripts directly interacting with the MySQL database. Users and network managers can access the database by using a set of web-based Php applications.

Predicting spatial and temporal distribution of Indo-Pacific lionfish (Pterois volitans) in Biscayne Bay through habitat suitability modeling

USGS Publications Warehouse

Bernal, Nicholas A.; DeAngelis, Donald L.; Schofield, Pamela J.; Sullivan Sealey, Kathleen

2014-01-01

Invasive species may exhibit higher levels of growth and reproduction when environmental conditions are most suitable, and thus their effects on native fauna may be intensified. Understanding potential impacts of these species, especially in the nascent stages of a biological invasion, requires critical information concerning spatial and temporal distributions of habitat suitability. Using empirically supported environmental variables (e.g., temperature, salinity, dissolved oxygen, rugosity, and benthic substrate), our models predicted habitat suitability for the invasive lionfish (Pterois volitans) in Biscayne Bay, Florida. The use of Geographic Information Systems (GIS) as a platform for the modeling process allowed us to quantify correlations between temporal (seasonal) fluctuations in the above variables and the spatial distribution of five discrete habitat quality classes, whose ranges are supported by statistical deviations from the apparent best conditions described in prior studies. Analysis of the resulting models revealed little fluctuation in spatial extent of the five habitat classes on a monthly basis. Class 5, which represented the area with environmental variables closest to the best conditions for lionfish, occupied approximately one-third of Biscayne Bay, with subsequent habitats declining in area. A key finding from this study was that habitat suitability increased eastward from the coastline, where higher quality habitats were adjacent to the Atlantic Ocean and displayed marine levels of ambient water quality. Corroboration of the models with sightings from the USGS-NAS database appeared to support our findings by nesting 79 % of values within habitat class 5; however, field testing (i.e., lionfish surveys) is necessary to confirm the relationship between habitat classes and lionfish distribution.

Storage influence on the functional, sensory and keeping quality of quality protein maize flour.

PubMed

Shobha, D; Kumar, H V Dileep; Sreeramasetty, T A; Puttaramanaik; Gowda, K T Pandurange; Shivakumar, G B

2014-11-01

Apart from nutritional values functional and sensory properties affect the behavior of food system and its acceptability for consumption during storage. Hence keeping quality of maize flour (HQPM-7) with and without lime treatment(control) was studied in terms of functional (bulk density, pH, swelling capacity, water and oil absorption capacity, least gelation concentration, peroxide value), sensory (appearance, color, taste, texture, mouth feel and overall acceptability) and rolling parameters (water absorption by flour, rolling quality, diameter after baking ) for a period of 6 months under room temperature (25 ± 5 °C) in two types of packages viz, LDPE cover (P) and plastic box (B). Physical parameters such as length, breadth and thickness (11.26-10.52 mm, 9.67-9.14 mm, & 4.72-3.95 mm) were reduced in lime treated grains compared to control. Significant increase (p ≤ 0.05) in ash content of lime treated flour (1.67 ± 0.01 g) was observed compared to control (1.5 ± 0.02 g). Calcium content of lime treated maize flour increased significantly (p ≤ 0.05) from 48 to 136 mg. There is a significant reduction in functional properties of flour after 3 and 2 months irrespective in polyethylene cover and plastic box. The properties like rolling quality, diameter after baking and water uptake by the flour were reduced significantly (p ≤ 0.05) after 4 months of storage in treated and after 1 month in control samples. Sensory scores of roti (dry pan cake) decreased significantly after 3 months of storage with an overall acceptability score of 4.0 and 3.4. In control samples mean taste (3.6), mouth feel (3.8) as well as OAA scores (3.8) decreased after second month. Hence lime treated maize flour with added nutritional benefits is suitable for making rotis of good palatability and can be stored in LDPE covers up to 3 months.

RELATING WEIGHT AND COUNT DISTRIBUTIONS OF STREAM BED GRAVEL

EPA Science Inventory

The size distribution of particles in a stream bed reflects the stream hydrology as well as its physical and chemical water quality characteristics. In environmental assessments, gravel distribution determines habitat quality for aquatic insects and stream suitability for spawnin...

Development of a Next Generation Air Quality Modeling System

EPA Science Inventory

In the presentation we will describe our modifications to MPAS to improve its suitability for retrospective air quality applications and show evaluations of global and regional meterological simulations. Our modifications include addition of physics schemes that we developed for...

Water-quality models to assess algal community dynamics, water quality, and fish habitat suitability for two agricultural land-use dominated lakes in Minnesota, 2014

USGS Publications Warehouse

Smith, Erik A.; Kiesling, Richard L.; Ziegeweid, Jeffrey R.

2017-07-20

Fish habitat can degrade in many lakes due to summer blue-green algal blooms. Predictive models are needed to better manage and mitigate loss of fish habitat due to these changes. The U.S. Geological Survey (USGS), in cooperation with the Minnesota Department of Natural Resources, developed predictive water-quality models for two agricultural land-use dominated lakes in Minnesota—Madison Lake and Pearl Lake, which are part of Minnesota’s sentinel lakes monitoring program—to assess algal community dynamics, water quality, and fish habitat suitability of these two lakes under recent (2014) meteorological conditions. The interaction of basin processes to these two lakes, through the delivery of nutrient loads, were simulated using CE-QUAL-W2, a carbon-based, laterally averaged, two-dimensional water-quality model that predicts distribution of temperature and oxygen from interactions between nutrient cycling, primary production, and trophic dynamics.The CE-QUAL-W2 models successfully predicted water temperature and dissolved oxygen on the basis of the two metrics of mean absolute error and root mean square error. For Madison Lake, the mean absolute error and root mean square error were 0.53 and 0.68 degree Celsius, respectively, for the vertical temperature profile comparisons; for Pearl Lake, the mean absolute error and root mean square error were 0.71 and 0.95 degree Celsius, respectively, for the vertical temperature profile comparisons. Temperature and dissolved oxygen were key metrics for calibration targets. These calibrated lake models also simulated algal community dynamics and water quality. The model simulations presented potential explanations for persistently large total phosphorus concentrations in Madison Lake, key differences in nutrient concentrations between these lakes, and summer blue-green algal bloom persistence.Fish habitat suitability simulations for cool-water and warm-water fish indicated that, in general, both lakes contained a large proportion of good-growth habitat and a sustained period of optimal growth habitat in the summer, without any periods of lethal oxythermal habitat. For Madison and Pearl Lakes, examples of important cool-water fish, particularly game fish, include northern pike (Esox lucius), walleye (Sander vitreus), and black crappie (Pomoxis nigromaculatus); examples of important warm-water fish include bluegill (Lepomis macrochirus), largemouth bass (Micropterus salmoides), and smallmouth bass (Micropterus dolomieu). Sensitivity analyses were completed to understand lake response effects through the use of controlled departures on certain calibrated model parameters and input nutrient loads. These sensitivity analyses also operated as land-use change scenarios because alterations in agricultural practices, for example, could potentially increase or decrease nutrient loads.

Validation of the quality of life in childhood epilepsy questionnaire in American epilepsy patients.

PubMed

Sabaz, Mark; Lawson, John A; Cairns, David R; Duchowny, Michael S; Resnick, Trevor J; Dean, Patricia M; Bye, Ann M E

2003-12-01

The aim of this study was to adapt the Australian Quality of Life in Childhood Epilepsy Questionnaire (QOLCE) and determine its psychometric properties in a North American population. Participants were North American families with children diagnosed with epilepsy. Parents were asked to complete the American QOLCE (USQOLCE) and the Child Health Questionnaire (CHQ). Seventy-one families completed the USQOLCE. The internal consistency reliability of the subscales was good. USQOLCE subscales correlated highly with theoretically similar subscales contained in the CHQ. Theoretically dissimilar subscales on the two instruments did not correlate as well. USQOLCE correlated significantly with a parental rating of seizure severity and an independent measure of degree of postoperative seizure control. This study demonstrated that the USQOLCE is suitable for a North American population with evidence of its reliability and validity including its sensitivity to seizure burden.

Quality assurance in the determination of metals in clinical chemistry and toxicology: the METOS project. Metalli Tossici.

PubMed

Patriarca, M; Menditto, A; Morisi, G

1995-01-01

National external quality assessment schemes (EQAS) for the determination of trace elements in blood (Al, Cd, Cu, Pb, Zn) have been promoted in Italy since 1983. They were organized by a working group of the Istituto Superiore di Sanità and known as "METOS (Metalli Tossici, toxic metals) project". The organization of the schemes included the preparation of suitable control materials by the promoting centre and the elaboration of valuable strategies of sample distribution, treatment of data and evaluation of results, that could be applied even to a small number of participants. The procedures used and the results obtained in ten years of activity of the METOS project are reported. Within the framework of the programme some information has been obtained, confirming the validity of the procedures used for sample preparation, sample distribution and evaluation of laboratories performance.

Dose-response relationships in multifunctional food design: assembling the evidence.

PubMed

Aggett, Peter J

2012-03-01

Demonstrating single and multiple functions attributable to foods or specific food components is a challenge. The International Life Sciences Institute Europe co-ordinated EU concerted actions, Functional Food Science in Europe (FUFOSE) and the Process for the Assessment of Scientific Support for Claims on Food (PASSCLAIM), respectively, addressed the soundness of the evidence and its coherence with a mechanistic schema comprising valid markers of exposure, intermediate and final outcomes and the quality and integrity of the evidence overall. Demonstrating causality often relies on randomized controlled trials (RCTs). However, in public health and biomedical science there is concern about the suitability of RCTs as sole standards of evidence-based approaches. Alternative and complementary approaches using updated Hill's viewpoints for appraising the evidence can be used in conjunction with evidence-based mechanistic reasoning and the quality criteria proposed in FUFOSE and PASSCLAIM to design studies and to assemble evidence exploring single or multiple benefits from food components and foods.

Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting

NASA Astrophysics Data System (ADS)

Ardila, L. C.; Garciandia, F.; González-Díaz, J. B.; Álvarez, P.; Echeverria, A.; Petite, M. M.; Deffley, R.; Ochoa, J.

Powder quality control is essential to obtain parts with suitable mechanical properties in Selective Laser Melting manufacturing technique. One of the most important advantages of suchtechnique is that it allows an efficient use of the material, due to the possibility to recycle and reuse un-melted powder. Nevertheless, powder material properties may change due to repeated recycling, affecting this way the mechanicalbehavior of parts. In this paper the effect of powder reuse on its quality and on the mechanical properties of the resulting melted parts is studied via self-developed recycling methodology. The material considered for investigation was IN718, a nickel superalloy widely used in industry. After recycling powder up to 14 times, no significant changes were observed in powder and test parts properties. The results obtained in this work will help to validate powder recycling methodology for its use in current industrial Selective Laser Melting manufacturing.

An automated technique for manufacturing thermoplastic stringers in continuous length

NASA Astrophysics Data System (ADS)

Pantelakis, Sp.; Baxevani, E.; Spelz, U.

In the present work an automated Continuous Compression Moulding Technique for the manufacture of stringers in continuous length is presented. The method combines pultrusion and hot-pressing. The technique is utilized for the production of L-shape stringers which are widely applied in aerospace constructions. The investigation was carried out on carbon reinforced PEEK (C/PEEK), as well as, for comparison, on the thermoplastic composites carbon reinforced polyethersulfon (C/PES), glass and carbon reinforced polyphenylene-sulfide (G/PPS, C/PPS) and Kevlar reinforced Polyamide 6 (K/PA 6). For the materials investigated the optimized process parameters for manufacturing the L-shape stringers were derived experimentally. To achieve this goal, the quality of the produced parts was controlled by using non-destructive testing techniques. Parts providing satisfactory quality were also tested destructively to measure their mechanical properties. The investigation results have shown the suitability of the technique to produce continuous length stringers.

Effect of Microwave Vacuum Drying on the Drying Characteristics, Color, Microstructure, and Antioxidant Activity of Green Coffee Beans.

PubMed

Dong, Wenjiang; Cheng, Ke; Hu, Rongsuo; Chu, Zhong; Zhao, Jianping; Long, Yuzhou

2018-05-11

The aim of this study is to investigate the effect of microwave vacuum drying (MVD) on the drying characteristics and quality attributes of green coffee beans. We specifically focused on the effective moisture diffusion coefficient ( D eff ), surface temperature, glass transition temperature ( T g ), water state, and microstructure. The kinetics of color changes during drying, total phenolic content (TPC), and antioxidant activity (DPPH, FRAP, and ABTS) were also characterized. Microwave power during MVD affected the porosity of coffee beans, their color, TPC, and antioxidant activity. The Allometric 1 model was the most suitable for simulating surface temperature rise kinetics. Thermal processing of green coffee beans resulted in increased b* , L* , Δ E , and TPC values, and greater antioxidant capacity. These findings may provide a theoretical reference for the technical improvement, mechanisms of flavor compound formation, and quality control of dried green coffee beans.

Low-Loss Superconducting Nanowire Circuits Using a Neon Focused Ion Beam

NASA Astrophysics Data System (ADS)

Burnett, J.; Sagar, J.; Kennedy, O. W.; Warburton, P. A.; Fenton, J. C.

2017-07-01

We present low-temperature measurements of low-loss superconducting nanowire-embedded resonators in the low-power limit relevant for quantum circuits. The superconducting resonators are embedded with superconducting nanowires with widths down to 20 nm using a neon focused ion beam. In the low-power limit, we demonstrate an internal quality factor up to 3.9 ×105 at 300 mK [implying a two-level-system-limited quality factor up to 2 ×105 at 10 mK], not only significantly higher than in similar devices but also matching the state of the art of conventional Josephson-junction-embedded resonators. We also show a high sensitivity of the nanowire to stray infrared photons, which is controllable by suitable precautions to minimize stray photons in the sample environment. Our results suggest that there are excellent prospects for superconducting-nanowire-based quantum circuits.

Sperm nuclear protamines: A checkpoint to control sperm chromatin quality.

PubMed

Steger, Klaus; Balhorn, Rod

2018-05-23

Protamines are nuclear proteins which are specifically expressed in haploid male germ cells. Their replacement of histones and binding to DNA is followed by chromatin hypercondensation that protects DNA from negative influences by environmental factors. Mammalian sperm contain two types of protamines: PRM1 and PRM2. While the proportion of the two protamines is highly variable between different species, abnormal ratios within a species are known to be associated with male subfertility. Therefore, it is more than likely that correct protamine expression represents a kind of chromatin checkpoint during sperm development rendering protamines as suitable biomarkers for the estimation of sperm quality. This review presents an overview of our current knowledge on protamines comparing gene and protein structures between different mammalian species with particular consideration given to man, mouse and stallion. At last, recent insights into the possible role of inherited sperm histones for early embryo development are provided. © 2018 Blackwell Verlag GmbH.

Managing Environmental Flows for Impounded Rivers in Semi-Arid Regions- A Habitat Suitability Index (HSI) Approach for the Assessment of River Habitat for Salmonid Populations

NASA Astrophysics Data System (ADS)

Pai, H.; Sivakumaran, K.; Villamizar, S. R.; Flanagan, J.; Guo, Q.; Harmon, T. C.

2013-12-01

Balancing ecosystem health in water-scarce, agriculturally dominated river basins remains a challenge. In dry water years, maintaining conditions for restored and sustained indigenous fish populations (a frequently used indicator for ecosystem health) is particularly challenging. Competing human demands include urban and agricultural water supplies, hydropower, and flood control. In many semi-arid regions, increasing drought intensity and frequency under future climate scenarios will combine with population increases to water scarcity. The goal of this work is to better understand how reservoir releases affect fish habitat and overall river aquatic ecosystem quality. Models integrating a diverse array of physical and biological processes and system state are used to forecast the river ecosystem response to changing drivers. We propose a distributed parameter-based Habitat Suitability Index (HSI) approach for assessing fish habitat quality. Our river ecosystem HSI maps are based on a combination of the following: (1) In situ data describing stream flow and water quality conditions; (2) Spatial observations, including surveyed cross-sections, aerial imagery and digital elevation maps (DEM) of the river and its riparian corridor; and (3) Simulated spatially distributed water depths, flow velocities, and temperatures estimated from 1D and 2D river flow and temperature models (HEC-RAS and CE-QUAL-W2, respectively). With respect to (2), image processing schemes are used to classify and map key habitat features, namely riparian edge and shallow underwater vegetation. HSI maps can be modified temporally to address specific life cycle requirements of indicator fish species. Results are presented for several reaches associated with the San Joaquin River Restoration Project, focusing on several components of the Chinook salmon life cycle. HSI maps and interpretations are presented in the context of a range of prescribed reservoir release hydrographs linked to California water year descriptors (wet, dry, critical low, etc.). Implications are discussed with respect to effective reservoir operation (requisite flow releases and temperature) and restorative actions (e.g., riparian vegetation) in the context of habitat suitability.

Quality Appraisal of Single-Subject Experimental Designs: An Overview and Comparison of Different Appraisal Tools

ERIC Educational Resources Information Center

Wendt, Oliver; Miller, Bridget

2012-01-01

Critical appraisal of the research literature is an essential step in informing and implementing evidence-based practice. Quality appraisal tools that assess the methodological quality of experimental studies provide a means to identify the most rigorous research suitable for evidence-based decision-making. In single-subject experimental research,…

Relationship between solvent retention capacity and protein molecular weight distribution, quality characteristics, and breadmaking functionality of hard red spring wheat flour

USDA-ARS?s Scientific Manuscript database

In order to investigate suitability of solvent retention capacity (SRC) test for quality assessment of hard red spring (HRS) wheat flour, ten HRS genotypes from six locations in North Dakota State were analyzed for SRC and flour and breadmaking quality characteristics. The SRC values were significa...

Identification and selection for tuber calcium, internal quality and pitted scab in segregating ‘Atlantic’ x ‘Superior’ reciprocal tetraploid populations

USDA-ARS?s Scientific Manuscript database

Tuber quality traits are a major interest for breeders and the potato chip industry. This research intended to generate populations that can be suitable for the genetic study of tuber calcium, internal quality, common scab, and other commercially important traits such as yield, specific gravity and ...

An audit of a hospital-based Doppler ultrasound quality control protocol using a commercial string Doppler phantom.

PubMed

Cournane, S; Fagan, A J; Browne, J E

2014-05-01

Results from a four-year audit of a Doppler quality assurance (QA) program using a commercially available Doppler string phantom are presented. The suitability of the phantom was firstly determined and modifications were made to improve the reliability and quality of the measurements. QA of Doppler ultrasound equipment is very important as data obtained from these systems is used in patient management. It was found that if the braided-silk filament of the Doppler phantom was exchanged with an O-ring rubber filament and the velocity range below 50 cm/s was avoided for Doppler quality control (QC) measurements, then the maximum velocity accuracy (MVA) error and intrinsic spectral broadening (ISB) results obtained using this device had a repeatability of 18 ± 3.3% and 19 ± 3.5%, respectively. A consistent overestimation of the MVA of between 12% and 56% was found for each of the tested ultrasound systems. Of more concern was the variation of the overestimation within each respective transducer category: MVA errors of the linear, curvilinear and phased array probes were in the range 12.3-20.8%, 32.3-53.8% and 27-40.7%, respectively. There is a dearth of QA data for Doppler ultrasound; it would be beneficial if a multicentre longitudinal study was carried out using the same Doppler ultrasound test object to evaluate sensitivity to deterioration in performance measurements. Copyright © 2013 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Control of sinter quality for blast furnaces of SAIL through characterization of high temperature properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mishra, U.N.; Thakur, B.; Mediratta, S.R.

1996-12-31

Quality of blast furnace (BF) burden materials and their performance inside the furnace have attracted increased importance worldwide. High productivity, low fuel rate and stable operation of BF can be achieved by suitably controlling the quality of input materials particularly that of sinter which is the main constituent of the burden. Reduction Degradation Index (RDI), Reducibility Index (RI) and Softening-melting characteristics are some of the quality indicators of sinter. The effect of chemical composition of sinter in the ranges of CaO/SiO{sub 2} 1.4--2.0, FeO 4.0--8.0, Al{sub 2}O{sub 3} 1.3--2.0 and MgO 1.2--2.0 on the above mentioned properties have been reportedmore » in literature. Due to the peculiarity of Indian raw materials, i.e., high ash content of coke and high Al{sub 2}O{sub 3} content of iron ore, the sinter composition varies over a wide range of CaO/SiO{sub 2} 2.0--2.5, FeO 8--11%, Al{sub 2}O{sub 3} 2--4% and MgO 2--5% in different plants of SAIL. This paper discusses the effect of above constituents in higher ranges as compared to earlier study on RDI, RI and Softening-melting properties so that sinter composition can be optimized for achieving desirable properties for better BF performance.« less

Rural housing for control of Chagas disease in Venezuela.

PubMed

Briceno-Leon, R

1987-12-01

The home is an important protective element for the health of its inhabitants - but these inhabitants often include not only the householders but also domestic pests and vectors of disease. This is particularly so in Latin America where domestic triatomine bugs thrive in many of the poorer quality rural houses, emerging from their crevices at night to feed and transmit Trypanosoma cruzi in their faeces. At the public health level, there is neither drug nor vaccine suitable for controlling T. cruzi - causative agent of Chagas disease - but transmission can be interrupted by control of the domestic vectors. Traditionally, vector control has involved spraying houses with residual insecticides, but a more long-term solution, with many colateral benefits, is to improve rural housing in such a way that colonization by triatomine bugs is inhibited. Such an approach involves development of low-cost techniques for house construction, and mobilization of rural communities to make use of them. In this, Venezuela has played a leading role, as Roberto Briceno-Leon reports.

Psychotherapy for depression among advanced, incurable cancer patients: A systematic review and meta-analysis.

PubMed

Okuyama, Toru; Akechi, Tatsuo; Mackenzie, Lisa; Furukawa, Toshi A

2017-05-01

There is a high prevalence of depressive disorder and depressive symptoms among advanced, incurable cancer patients. Patients commonly report a preference for non-pharmacological treatments such as psychotherapy over pharmacological treatments for depression. The objective of this review was to investigate the effectiveness of psychotherapy for the treatment of depression in people with advanced, incurable cancer via a meta-analysis of randomized controlled trials (RCTs). We searched research databases and clinical trial registries for studies published prior to June 2015. No language restrictions were applied when selecting studies. Cochrane Collaboration meta-analysis review methodology was used. All relevant RCTs comparing psychotherapy with control conditions on depression outcomes for adults with advanced cancer were eligible for inclusion. We calculated pooled effect sizes using Hedges g and a standardized mean difference (SMD) of change between baseline and post-treatment scores. Quality of evidence was rated using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. Of 13 studies included in the review, 12 reported data suitable for meta-analysis. Psychotherapy was associated with moderate decrease in depression score (SMD -0.67, 95% confidence interval -1.06 to -0.29, P=0.0005). Few studies focused on people with clinically diagnosed depression. Overall, quality of evidence across the included studies was rated as low, and heterogeneity was high. Low quality evidence suggests that psychotherapy is moderately more effective for the amelioration of symptoms of depression among advanced, incurable cancer patients than the control conditions. There is insufficient high-quality evidence supporting the effectiveness of psychotherapy for patients with clinically diagnosed depression. Copyright © 2017 Elsevier Ltd. All rights reserved.

Integrated Watershed Pollution Control at Wujingang Canal, China

NASA Astrophysics Data System (ADS)

Zheng, Z.; Yang, X.; Luo, X.

2012-04-01

With a drainage area of 400 square kilometers, Wujingang Canal is located at the economically developed Yangtz Delta of eastern China. As a major tributary, the canal contributes a significant amount of pollutant load to the Lake Tai. Over the past many years, water quality of the canal and its tributaries could not meet the lowest Category V of Chinese surface water quality standard, indicating that its water is not suitable for the purposes of irrigation or scenic views. Major pollution sources in the watershed include industries, residential households, agriculture, fishery, and animal feedlot operations. A comprehensive plan with a budget of 2 billion RMB for the Wujingang watershed pollution control was developed in 2008 and has been implemented progressively ever since. Major components of the plan include: (1) advanced treatment of wastewater from industries and municipal sewage plants for further removal of nitrogen and phosphorous; (2) industrial wastewater reuse; (3) contiguous treatment of sewage from rural residential households with cost-effective technologies such as tower ecofilter system; (4) recycling of rural wastes to generate high-value added products using technologies such as multi-phase anaerobic co-digestion; and (5) making full use of the local landscape and configuring physical, chemical, and biological pollutant treatment structures to build the "clean river network" for treatment of mildly polluted agricultural discharge and surface runoff. Through the implementation of the above measures, water quality of the Wujingang Canal and its tributaries is expected to improve to meet Category IV of Chinese surface water quality standard by 2012, and Category III standard by 2020. Keywords watershed pollution control, non-point source pollution, rural sewage, rural waste, Lake Tai

CARINA data synthesis project: pH data scale unification and cruise adjustments

NASA Astrophysics Data System (ADS)

Velo, A.; Pérez, F. F.; Lin, X.; Key, R. M.; Tanhua, T.; de La Paz, M.; van Heuven, S.; Jutterström, S.; Ríos, A. F.

2009-10-01

Data on carbon and carbon-relevant hydrographic and hydrochemical parameters from previously non-publicly available cruise data sets in the Artic Mediterranean Seas (AMS), Atlantic and Southern Ocean have been retrieved and merged to a new database: CARINA (CARbon IN the Atlantic). These data have gone through rigorous quality control (QC) procedures to assure the highest possible quality and consistency. The data for most of the measured parameters in the CARINA database were objectively examined in order to quantify systematic differences in the reported values, i.e. secondary quality control. Systematic biases found in the data have been corrected in the data products, i.e. three merged data files with measured, calculated and interpolated data for each of the three CARINA regions; AMS, Atlantic and Southern Ocean. Out of a total of 188 cruise entries in the CARINA database, 59 reported pH measured values. Here we present details of the secondary QC on pH for the CARINA database. Procedures of quality control, including crossover analysis between cruises and inversion analysis of all crossover data are briefly described. Adjustments were applied to the pH values for 21 of the cruises in the CARINA dataset. With these adjustments the CARINA database is consistent both internally as well as with GLODAP data, an oceanographic data set based on the World Hydrographic Program in the 1990s. Based on our analysis we estimate the internal accuracy of the CARINA pH data to be 0.005 pH units. The CARINA data are now suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation.

CARINA TCO2 data in the Atlantic Ocean

NASA Astrophysics Data System (ADS)

Pierrot, D.; Brown, P.; van Heuven, S.; Tanhua, T.; Schuster, U.; Wanninkhof, R.; Key, R. M.

2010-01-01

Water column data of carbon and carbon-relevant hydrographic and hydrochemical parameters from 188 cruises in the Arctic, Atlantic and Southern Ocean have been retrieved and merged in a new data base: the CARINA (CARbon IN the Atlantic) Project. These data have gone through rigorous quality control (QC) procedures to assure the highest possible quality and consistency. Secondary quality control, which involved objective study of data in order to quantify systematic differences in the reported values, was performed for the pertinent parameters in the CARINA data base. Systematic biases in the data have been corrected in the data products. The products are three merged data files with measured, adjusted and interpolated data of all cruises for each of the three CARINA regions (Arctic, Atlantic and Southern Ocean). Ninety-eight cruises were conducted in the "Atlantic" defined as the region south of the Greenland-Iceland-Scotland Ridge and north of about 30° S. Here we report the details of the secondary QC which was done on the total dissolved inorganic carbon (TCO2) data and the adjustments that were applied to yield the final data product in the Atlantic. Procedures of quality control - including crossover analysis between stations and inversion analysis of all crossover data - are briefly described. Adjustments were applied to TCO2 measurements for 17 of the cruises in the Atlantic Ocean region. With these adjustments, the CARINA data base is consistent both internally as well as with GLODAP data, an oceanographic data set based on the WOCE Hydrographic Program in the 1990s, and is now suitable for accurate assessments of, for example, regional oceanic carbon inventories, uptake rates and model validation.

CARINA alkalinity data in the Atlantic Ocean

NASA Astrophysics Data System (ADS)

Velo, A.; Perez, F. F.; Brown, P.; Tanhua, T.; Schuster, U.; Key, R. M.

2009-08-01

Data on carbon and carbon-relevant hydrographic and hydrochemical parameters from previously non-publicly available cruise data sets in the Arctic, Atlantic and Southern Ocean have been retrieved and merged to a new database: CARINA (CARbon IN the Atlantic). These data have gone through rigorous quality control (QC) procedures to assure the highest possible quality and consistency. The data for most of the measured parameters in the CARINA data base were objectively examined in order to quantify systematic differences in the reported values, i.e. secondary quality control. Systematic biases found in the data have been corrected in the data products, i.e. three merged data files with measured, calculated and interpolated data for each of the three CARINA regions; Arctic, Atlantic and Southern Ocean. Out of a total of 188 cruise entries in the CARINA database, 98 were conducted in the Atlantic Ocean and of these, 75 cruises report alkalinity values. Here we present details of the secondary QC on alkalinity for the Atlantic Ocean part of CARINA. Procedures of quality control, including crossover analysis between cruises and inversion analysis of all crossover data are briefly described. Adjustments were applied to the alkalinity values for 16 of the cruises in the Atlantic Ocean region. With these adjustments the CARINA database is consistent both internally as well as with GLODAP data, an oceanographic data set based on the World Hydrographic Program in the 1990s. Based on our analysis we estimate the internal accuracy of the CARINA-ATL alkalinity data to be 3.3 μmol kg-1. The CARINA data are now suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation.

CARINA: nutrient data in the Atlantic Ocean

NASA Astrophysics Data System (ADS)

Tanhua, T.; Brown, P. J.; Key, R. M.

2009-11-01

Data on carbon and carbon-relevant hydrographic and hydrochemical parameters from previously non-publicly available cruise data sets in the Arctic, Atlantic and Southern Ocean have been retrieved and merged to a new database: CARINA (CARbon IN the Atlantic). These data have gone through rigorous quality control (QC) procedures to assure the highest possible quality and consistency. The data for most of the measured parameters in the CARINA data base were objectively examined in order to quantify systematic differences in the reported values, i.e. secondary quality control. Systematic biases found in the data have been corrected in the data products, i.e. three merged data files with measured, calculated and interpolated data for each of the three CARINA regions; Arctic Mediterranean Seas, Atlantic and Southern Ocean. Out of a total of 188 cruise entries in the CARINA database, 98 were conducted in the Atlantic Ocean and of these 84 cruises report nitrate values, 79 silicate, and 78 phosphate. Here we present details of the secondary QC for nutrients for the Atlantic Ocean part of CARINA. Procedures of quality control, including crossover analysis between cruises and inversion analysis of all crossover data are briefly described. Adjustments were applied to the nutrient values for 43 of the cruises in the Atlantic Ocean region. With these adjustments the CARINA database is consistent both internally as well as with GLODAP data, an oceanographic data set based on the World Hydrographic Program in the 1990s (Key et al., 2004). Based on our analysis we estimate the internal accuracy of the CARINA-ATL nutrient data to be: nitrate 1.5%; phosphate 2.6%; silicate 3.1%. The CARINA data are now suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation.

CARINA: nutrient data in the Atlantic Ocean

NASA Astrophysics Data System (ADS)

Tanhua, T.; Brown, P. J.; Key, R. M.

2009-07-01

Data on carbon and carbon-relevant hydrographic and hydrochemical parameters from previously non-publicly available cruise data sets in the Arctic, Atlantic and Southern Ocean have been retrieved and merged to a new database: CARINA (CARbon IN the Atlantic). These data have gone through rigorous quality control (QC) procedures to assure the highest possible quality and consistency. The data for most of the measured parameters in the CARINA data base were objectively examined in order to quantify systematic differences in the reported values, i.e. secondary quality control. Systematic biases found in the data have been corrected in the data products, i.e. three merged data files with measured, calculated and interpolated data for each of the three CARINA regions; Arctic, Atlantic and Southern Ocean. Out of a total of 188 cruise entries in the CARINA database, 98 were conducted in the Atlantic Ocean and of these 84 cruises report nitrate values, 79 silicate, and 78 phosphate. Here we present details of the secondary QC for nutrients for the Atlantic Ocean part of CARINA. Procedures of quality control, including crossover analysis between cruises and inversion analysis of all crossover data are briefly described. Adjustments were applied to the nutrient values for 43 of the cruises in the Atlantic Ocean region. With these adjustments the CARINA database is consistent both internally as well as with GLODAP data, an oceanographic data set based on the World Hydrographic Program in the 1990s (Key et al., 2004). Based on our analysis we estimate the internal accuracy of the CARINA-ATL nutrient data to be: nitrate 1.5%; phosphate 2.6%; silicate 3.1%. The CARINA data are now suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation.

CARINA alkalinity data in the Atlantic Ocean

NASA Astrophysics Data System (ADS)

Velo, A.; Perez, F. F.; Brown, P.; Tanhua, T.; Schuster, U.; Key, R. M.

2009-11-01

Data on carbon and carbon-relevant hydrographic and hydrochemical parameters from previously non-publicly available cruise data sets in the Arctic, Atlantic and Southern Ocean have been retrieved and merged to a new database: CARINA (CARbon IN the Atlantic). These data have gone through rigorous quality control (QC) procedures to assure the highest possible quality and consistency. The data for most of the measured parameters in the CARINA data base were objectively examined in order to quantify systematic differences in the reported values, i.e. secondary quality control. Systematic biases found in the data have been corrected in the data products, i.e. three merged data files with measured, calculated and interpolated data for each of the three CARINA regions; Arctic, Atlantic and Southern Ocean. Out of a total of 188 cruise entries in the CARINA database, 98 were conducted in the Atlantic Ocean and of these, 75 cruises report alkalinity values. Here we present details of the secondary QC on alkalinity for the Atlantic Ocean part of CARINA. Procedures of quality control, including crossover analysis between cruises and inversion analysis of all crossover data are briefly described. Adjustments were applied to the alkalinity values for 16 of the cruises in the Atlantic Ocean region. With these adjustments the CARINA database is consistent both internally as well as with GLODAP data, an oceanographic data set based on the World Hydrographic Program in the 1990s. Based on our analysis we estimate the internal accuracy of the CARINA-ATL alkalinity data to be 3.3 μmol kg-1. The CARINA data are now suitable for accurate assessments of, for example, oceanic carbon inventories and uptake rates and for model validation.

A test of 3 models of Kirtland's warbler habitat suitability

Treesearch

Mark D. Nelson; Richard R. Buech

1996-01-01

We tested 3 models of Kirtland's warbler (Dendroica kirtlandii) habitat suitability during a period when we believe there was a surplus of good quality breeding habitat. A jack pine canopy-cover model was superior to 2 jack pine stem-density models in predicting Kirtland's warbler habitat use and non-use. Estimated density of birds in high...

Soil-site relationships of the upland oaks

Treesearch

Willard H. Carmean

1971-01-01

Site quality for upland oaks can be estimated directly by using site-index curves, or indirect estimations can be made by using soil-site prediction methods. Presently available harmonized site-index curves may not be suitable for all upland oak species, or may not be suitable throughout their range. New stem-analysis data show that different species of oak have...

Linking Health Concepts in the Assessment and Evaluation of Water Distribution Systems

ERIC Educational Resources Information Center

Karney, Bryan W.; Filion, Yves R.

2005-01-01

The concept of health is not only a specific criterion for evaluation of water quality delivered by a distribution system but also a suitable paradigm for overall functioning of the hydraulic and structural components of the system. This article views health, despite its complexities, as the only criterion with suitable depth and breadth to allow…

Modeling the relationship between landscape characteristics and water quality in a typical highly intensive agricultural small watershed, Dongting lake basin, south central China.

PubMed

Li, Hongqing; Liu, Liming; Ji, Xiang

2015-03-01

Understanding the relationship between landscape characteristics and water quality is critically important for estimating pollution potential and reducing pollution risk. Therefore, this study examines the relationship between landscape characteristics and water quality at both spatial and temporal scales. The study took place in the Jinjing River watershed in 2010; seven landscape types and four water quality pollutions were chosen as analysis parameters. Three different buffer areas along the river were drawn to analyze the relationship as a function of spatial scale. The results of a Pearson's correlation coefficient analysis suggest that "source" landscape, namely, tea gardens, residential areas, and paddy lands, have positive effects on water quality parameters, while forests exhibit a negative influence on water quality parameters because they represent a "sink" landscape and the sub-watershed level is identified as a suitable scale. Using the principal component analysis, tea gardens, residential areas, paddy lands, and forests were identified as the main landscape index. A stepwise multiple regression analysis was employed to model the relationship between landscape characteristics and water quality for each season. The results demonstrate that both landscape composition and configuration affect water quality. In summer and winter, the landscape metrics explained approximately 80.7 % of the variance in the water quality variables, which was higher than that for spring and fall (60.3 %). This study can help environmental managers to understand the relationships between landscapes and water quality and provide landscape ecological approaches for water quality control and land use management.

Thermal Expansion Coefficient of Cold-Pressed Silicon Carbide

NASA Astrophysics Data System (ADS)

Olivieri, E.; Pasca, E.; Ventura, G.; Barucci, M.; Risegari, L.

2004-07-01

The measurement of the thermal linear expansion coefficient of a cold sintered SiC has been carried out in the 4.2 - 293 K temperature range. The properties of silicon carbide are specially suitable to realise high quality mirrors and complete optomechanical structures for space astronomy. The thermal contraction of the material used for the realization of the mirror is, of course, of primary interest. We present here both a plot and smoothed data of SiC thermal contraction coefficient. Details of the dilatometric interferometer used to carry out the measurements are also reported together with a control test of the measuring bench on a material (brass) of known thermal contraction.

Results on reuse of reclaimed shower water

NASA Technical Reports Server (NTRS)

Verostko, Charles E.; Garcia, Rafael; Pierson, Duane L.; Reysa, Richard P.; Irbe, Robert

1986-01-01

The Waste Water Recovery System that has been used in conjunction with a microgravity whole body shower to test a closed loop shower water reclamation system applicable to the NASA Space Station employs a Thermoelectric Integrated Hollow Fiber Membrane Evaporation Subsystem. Attention is given to the suitability of a Space Shuttle soap for such crew showers, the effects of shower water on the entire system, and the purification qualities of the recovered water. The chemical pretreatment of the shower water for microorganism control involved activated carbon, mixed ion exchange resin beds, and iodine bactericide dispensing units. The water was recycled five times, demonstrating the feasibility of reuse.

Incorporating Topic Assignment Constraint and Topic Correlation Limitation into Clinical Goal Discovering for Clinical Pathway Mining.

PubMed

Xu, Xiao; Jin, Tao; Wei, Zhijie; Wang, Jianmin

2017-01-01

Clinical pathways are widely used around the world for providing quality medical treatment and controlling healthcare cost. However, the expert-designed clinical pathways can hardly deal with the variances among hospitals and patients. It calls for more dynamic and adaptive process, which is derived from various clinical data. Topic-based clinical pathway mining is an effective approach to discover a concise process model. Through this approach, the latent topics found by latent Dirichlet allocation (LDA) represent the clinical goals. And process mining methods are used to extract the temporal relations between these topics. However, the topic quality is usually not desirable due to the low performance of the LDA in clinical data. In this paper, we incorporate topic assignment constraint and topic correlation limitation into the LDA to enhance the ability of discovering high-quality topics. Two real-world datasets are used to evaluate the proposed method. The results show that the topics discovered by our method are with higher coherence, informativeness, and coverage than the original LDA. These quality topics are suitable to represent the clinical goals. Also, we illustrate that our method is effective in generating a comprehensive topic-based clinical pathway model.

Incorporating Topic Assignment Constraint and Topic Correlation Limitation into Clinical Goal Discovering for Clinical Pathway Mining

PubMed Central

Xu, Xiao; Wei, Zhijie

2017-01-01

Clinical pathways are widely used around the world for providing quality medical treatment and controlling healthcare cost. However, the expert-designed clinical pathways can hardly deal with the variances among hospitals and patients. It calls for more dynamic and adaptive process, which is derived from various clinical data. Topic-based clinical pathway mining is an effective approach to discover a concise process model. Through this approach, the latent topics found by latent Dirichlet allocation (LDA) represent the clinical goals. And process mining methods are used to extract the temporal relations between these topics. However, the topic quality is usually not desirable due to the low performance of the LDA in clinical data. In this paper, we incorporate topic assignment constraint and topic correlation limitation into the LDA to enhance the ability of discovering high-quality topics. Two real-world datasets are used to evaluate the proposed method. The results show that the topics discovered by our method are with higher coherence, informativeness, and coverage than the original LDA. These quality topics are suitable to represent the clinical goals. Also, we illustrate that our method is effective in generating a comprehensive topic-based clinical pathway model. PMID:29065617

Soft wheat quality characteristics required for making baking powder biscuits

USDA-ARS?s Scientific Manuscript database

Fifteen soft wheat varieties were evaluated for their grain, milling, flour and dough mixing characteristics, as well as their solvent retention capacities (SRCs), pasting properties and suitability for making baking powder biscuits, to identify wheat quality characteristics required for making bisc...

Relationship between the dough quality and content of specific glutenin proteins in wheat mill streams, and its application to making flour suitable for instant Chinese noodles.

PubMed

Yahata, Eriko; Maruyama-Funatsuki, Wakako; Nishio, Zenta; Yamamoto, Yoshihiko; Hanaoka, Akihiro; Sugiyama, Hisashi; Tanida, Masatoshi; Saruyama, Haruo

2006-04-01

The content of specific proteins such as high-molecular-weight glutenin subunits HMW-GS 5+10 and low-molecular-weight glutenin subunits LMW-GS KS2 in wheat mill streams of extra-strong Kachikei 33 wheat was quantified by SDS-PAGE and 2D-PAGE. The mill streams showed varied quantities of HMW-GS 5+10 (0.077 to 2.007 mg/g of mill stream), LMW-GS KS2 (0.018 to 0.586 mg/g of mill stream) and total protein (9.42% to 18.98%). The contents of these specific proteins in the mill streams were significantly correlated with the SDS sedimentation volume and the mixing properties, which are respective indices of specific loaf volume and dough strength. The contents of these specific glutenin proteins in the mill streams were therefore found to be significantly important for improving the dough quality suitable for bread and Chinese noodles. Accordingly, we present here the application of this information to the development of an effective method for producing mill streams with high quality and yield that are suitable for instant Chinese noodles.

Study of different pretreatments for reverse osmosis reclamation of a petrochemical secondary effluent.

PubMed

Benito-Alcázar, C; Vincent-Vela, M C; Gozálvez-Zafrilla, J M; Lora-García, J

2010-06-15

Conventionally treated petrochemical wastewaters contain substantial quantities of hazardous pollutants. In addition, wastewater reuse is being enhanced as a consequence of the shortage of fresh water. Advanced petrochemical wastewater treatment for water reuse will reduce hazardous pollutants discharges as well as water consumption. Reverse osmosis is a suitable technology to obtain pure water. This work studies the adequacy of different pretreatments applied to a petrochemical secondary effluent to produce a suitable feeding for reverse osmosis treatment. The permeate obtained can be used in the petrochemical industry for different processes. In this work, several experiments (granulated activated carbon filtration, ultrafiltration, nanofiltration and granulated activated carbon filtration coupled with nanofiltration) were performed to improve the conventional pretreatment. Total organic carbon, chemical oxygen demand, turbidity and silt density index were used to evaluate water quality for reverse osmosis feeding. In granulated activated carbon filtration, all the measured parameters but silt density index indicated a good filtrate quality to feed reverse osmosis membranes. Although the ultrafiltration permeate obtained was suitable for reverse osmosis, nanofiltration and granulated activated carbon filtration coupled with NF provided a better effluent quality for reverse osmosis than the other pretreatments studied. Copyright 2010 Elsevier B.V. All rights reserved.

Effect of muscle type and frozen storage on the quality parameters of Iberian restructured meat preparations.

PubMed

Antequera, Teresa; Pérez-Palacios, Trinidad; Rodas, Elena; Rodríguez, Mar; Córdoba, Juan J

2014-10-01

The main objective of this study was to evaluate the effect of muscle type and frozen storage on the quality of restructured meat preparations from undervalued Iberian muscle to make use of meat from a high-quality and natural pig production system. The effect of two muscle types (i.e. white-glycolytic (W) and red-oxidative (R)) and frozen storage (lasting 0, 30, 60 and 90 days) on quality characteristics were assessed. Significant differences were found between the W and R Iberian restructured preparations in most physicochemical and some colour, texture and sensory traits, and in the fatty acid profile and oxidative measurements, suggesting that the R muscles are more suitable; however, the microbial contamination should be reduced. Frozen storage reduced but did not eliminate the initial microbial contamination, and it enhanced some quality traits in the Iberian restructured preparations, i.e. increased a* values, cohesiveness and juiciness and decreased adhesiveness and pastiness, without negatively affecting any parameter. Thus, frozen Iberian restructured preparations are recommended to be commercialized. In addition, the implementation or revision of Hazard Analysis and Critical Control Point is recommended to reduce microbial contamination. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Microbiological quality and safety assessment of lettuce production in Brazil.

PubMed

Ceuppens, Siele; Hessel, Claudia Titze; de Quadros Rodrigues, Rochele; Bartz, Sabrina; Tondo, Eduardo César; Uyttendaele, Mieke

2014-07-02

The microbiological quality and safety of lettuce during primary production in Brazil were determined by enumeration of hygiene indicators Escherichia coli, coliforms and enterococci and detection of enteric pathogens Salmonella and E. coli O157:H7 in organic fertilizers, soil, irrigation water, lettuce crops, harvest boxes and worker's hands taken from six different lettuce farms throughout the crop growth cycle. Generic E. coli was a suitable indicator for the presence of Salmonella and E. coli O157:H7, while coliforms and enterococci were not. Few pathogens were detected: 5 salmonellae and 2 E. coli O157:H7 from 260 samples, of which only one was lettuce and the others were manure, soil and water. Most (5/7) pathogens were isolated from the same farm and all were from organic production. Statistical analysis revealed the following environmental and agro-technical risk factors for increased microbial load and pathogen prevalence in lettuce production: high temperature, flooding of lettuce fields, application of contaminated organic fertilizer, irrigation with water of inferior quality and large distances between the field and toilets. Control of the composting process of organic fertilizers and the irrigation water quality appear most crucial to improve and/or maintain the microbiological quality and safety during the primary production of lettuce. Copyright © 2014 Elsevier B.V. All rights reserved.

Assessing coastal reclamation suitability based on a fuzzy-AHP comprehensive evaluation framework: A case study of Lianyungang, China.

PubMed

Feng, Lan; Zhu, Xiaodong; Sun, Xiang

2014-12-15

Coastal reclamation suitability evaluation (CRSE) is a difficult, complex and protracted process requiring the evaluation of many different criteria. In this paper, an integrated framework employing a fuzzy comprehensive evaluation method and analytic hierarchy process (AHP) was applied to the suitability evaluation for coastal reclamation for future sustainable development in the coastal area of Lianyungang, China. The evaluation results classified 6.63%, 22.99%, 31.59% and 38.79% of the coastline as suitable, weakly suitable, unsuitable and forbidden, respectively. The evaluation results were verified by the marine pollution data and highly consistent with the water quality status. The fuzzy-AHP comprehensive evaluation method (FACEM) was found to be suitable for the CRSE. This CRSE can also be applied to other coastal areas in China and thereby be used for the better management of coastal reclamation and coastline protection projects. Copyright © 2014 Elsevier Ltd. All rights reserved.

Combining groundwater quality analysis and a numerical flow simulation for spatially establishing utilization strategies for groundwater and surface water in the Pingtung Plain

NASA Astrophysics Data System (ADS)

Jang, Cheng-Shin; Chen, Ching-Fang; Liang, Ching-Ping; Chen, Jui-Sheng

2016-02-01

Overexploitation of groundwater is a common problem in the Pingtung Plain area of Taiwan, resulting in substantial drawdown of groundwater levels as well as the occurrence of severe seawater intrusion and land subsidence. Measures need to be taken to preserve these valuable groundwater resources. This study seeks to spatially determine the most suitable locations for the use of surface water on this plain instead of extracting groundwater for drinking, irrigation, and aquaculture purposes based on information obtained by combining groundwater quality analysis and a numerical flow simulation assuming the planning of manmade lakes and reservoirs to the increase of water supply. The multivariate indicator kriging method is first used to estimate occurrence probabilities, and to rank townships as suitable or unsuitable for groundwater utilization according to water quality standards for drinking, irrigation, and aquaculture. A numerical model of groundwater flow (MODFLOW) is adopted to quantify the recovery of groundwater levels in townships after model calibration when groundwater for drinking and agricultural demands has been replaced by surface water. Finally, townships with poor groundwater quality and significant increases in groundwater levels in the Pingtung Plain are prioritized for the groundwater conservation planning based on the combined assessment of groundwater quality and quantity. The results of this study indicate that the integration of groundwater quality analysis and the numerical flow simulation is capable of establishing sound strategies for joint groundwater and surface water use. Six southeastern townships are found to be suitable locations for replacing groundwater with surface water from manmade lakes or reservoirs to meet drinking, irrigation, and aquaculture demands.

Quality of the parent-child interaction in young children with type 1 diabetes mellitus: study protocol.

PubMed

Nieuwesteeg, Anke M; Pouwer, Frans; van Bakel, Hedwig Ja; Emons, Wilco Hm; Aanstoot, Henk-Jan; Odink, Roelof; Hartman, Esther E

2011-04-14

In young children with type 1 diabetes mellitus (T1DM) parents have full responsibility for the diabetes-management of their child (e.g. blood glucose monitoring, and administering insulin). Behavioral tasks in childhood, such as developing autonomy, and oppositional behavior (e.g. refusing food) may interfere with the diabetes-management to achieve an optimal blood glucose control. Furthermore, higher blood glucose levels are related to more behavioral problems. So parents might need to negotiate with their child on the diabetes-management to avoid this direct negative effect. This interference, the negotiations, and the parent's responsibility for diabetes may negatively affect the quality of parent-child interaction. Nevertheless, there is little knowledge about the quality of interaction between parents and young children with T1DM, and the possible impact this may have on glycemic control and psychosocial functioning of the child. While widely used global parent-child interaction observational methods are available, there is a need for an observational tool specifically tailored to the interaction patterns of parents and children with T1DM. The main aim of this study is to construct a disease-specific observational method to assess diabetes-specific parent-child interaction. Additional aim is to explore whether the quality of parent-child interactions is associated with the glycemic control, and psychosocial functioning (resilience, behavioral problems, and quality of life). First, we will examine which situations are most suitable for observing diabetes-specific interactions. Then, these situations will be video-taped in a pilot study (N = 15). Observed behaviors are described into rating scales, with each scale describing characteristics of parent-child interactional behaviors. Next, we apply the observational tool on a larger scale for further evaluation of the instrument (N = 120). The parents are asked twice (with two years in between) to fill out questionnaires about psychosocial functioning of their child with T1DM. Furthermore, glycemic control (HbA1c) will be obtained from their medical records. A disease-specific observational tool will enable the detailed assessment of the quality of diabetes-specific parent-child interactions. The availability of such a tool will facilitate future (intervention) studies that will yield more knowledge about impact of parent-child interactions on psychosocial functioning, and glycemic control of children with T1DM.

Quality of the parent-child interaction in young children with type 1 diabetes mellitus: study protocol

PubMed Central

2011-01-01

Background In young children with type 1 diabetes mellitus (T1DM) parents have full responsibility for the diabetes-management of their child (e.g. blood glucose monitoring, and administering insulin). Behavioral tasks in childhood, such as developing autonomy, and oppositional behavior (e.g. refusing food) may interfere with the diabetes-management to achieve an optimal blood glucose control. Furthermore, higher blood glucose levels are related to more behavioral problems. So parents might need to negotiate with their child on the diabetes-management to avoid this direct negative effect. This interference, the negotiations, and the parent's responsibility for diabetes may negatively affect the quality of parent-child interaction. Nevertheless, there is little knowledge about the quality of interaction between parents and young children with T1DM, and the possible impact this may have on glycemic control and psychosocial functioning of the child. While widely used global parent-child interaction observational methods are available, there is a need for an observational tool specifically tailored to the interaction patterns of parents and children with T1DM. The main aim of this study is to construct a disease-specific observational method to assess diabetes-specific parent-child interaction. Additional aim is to explore whether the quality of parent-child interactions is associated with the glycemic control, and psychosocial functioning (resilience, behavioral problems, and quality of life). Methods/Design First, we will examine which situations are most suitable for observing diabetes-specific interactions. Then, these situations will be video-taped in a pilot study (N = 15). Observed behaviors are described into rating scales, with each scale describing characteristics of parent-child interactional behaviors. Next, we apply the observational tool on a larger scale for further evaluation of the instrument (N = 120). The parents are asked twice (with two years in between) to fill out questionnaires about psychosocial functioning of their child with T1DM. Furthermore, glycemic control (HbA1c) will be obtained from their medical records. Discussion A disease-specific observational tool will enable the detailed assessment of the quality of diabetes-specific parent-child interactions. The availability of such a tool will facilitate future (intervention) studies that will yield more knowledge about impact of parent-child interactions on psychosocial functioning, and glycemic control of children with T1DM. PMID:21492413

Quality and seasonal variation of rainwater harvested from concrete, asphalt, ceramic tile and green roofs in Chongqing, China.

PubMed

Zhang, Qianqian; Wang, Xiaoke; Hou, Peiqiang; Wan, Wuxing; Li, Ruida; Ren, Yufen; Ouyang, Zhiyun

2014-01-01

There is an urgent requirement to examine the quality of harvested rainwater for potable and non-potable purposes, based on the type of roofing material. In this study, we examined the effect on the quality of harvested rainwater of conventional roofing materials (concrete, asphalt and ceramic tile roofs) compared with alternative roofing materials (green roof). The results showed that the ceramic tile roof was the most suitable for rainwater-harvesting applications because of the lower concentrations of leachable pollutants. However, in this study, the green roof was not suitable for rainwater harvesting applications. In addition, seasonal trends in water quality parameters showed that pollutants in roof runoff in summer and autumn were lower than those in winter and spring. This study revealed that the quality of harvested rainwater was significantly affected by the roofing material; therefore, local government and urban planners should develop stricter testing programs and produce more weathering resistant roofing materials to allow the harvesting of rainwater for domestic and public uses. Copyright © 2013 Elsevier Ltd. All rights reserved.

Assessing the suitable habitat for reintroduction of brown trout (Salmo trutta forma fario) in a lowland river: A modeling approach.

PubMed

Boets, Pieter; Gobeyn, Sacha; Dillen, Alain; Poelman, Eddy; Goethals, Peter L M

2018-05-01

Huge efforts have been made during the past decades to improve the water quality and to restore the physical habitat of rivers and streams in western Europe. This has led to an improvement in biological water quality and an increase in fish stocks in many countries. However, several rheophilic fish species such as brown trout are still categorized as vulnerable in lowland streams in Flanders (Belgium). In order to support cost-efficient restoration programs, habitat suitability modeling can be used. In this study, we developed an ensemble of habitat suitability models using metaheuristic algorithms to explore the importance of a large number of environmental variables, including chemical, physical, and hydromorphological characteristics to determine the suitable habitat for reintroduction of brown trout in the Zwalm River basin (Flanders, Belgium), which is included in the Habitats Directive. Mean stream velocity, water temperature, hiding opportunities, and presence of pools or riffles were identified as the most important variables determining the habitat suitability. Brown trout mainly preferred streams with a relatively high mean reach stream velocity (0.2-1 m/s), a low water temperature (7-15°C), and the presence of pools. The ensemble of models indicated that most of the tributaries and headwaters were suitable for the species. Synthesis and applications . Our results indicate that this modeling approach can be used to support river management, not only for brown trout but also for other species in similar geographical regions. Specifically for the Zwalm River basin, future restoration of the physical habitat, removal of the remaining migration barriers and the development of suitable spawning grounds could promote the successful restoration of brown trout.

Assesment of future river habitat suitability under climate change scenarios in a mesoscale Alpine watershed of Italy (Serio River, Italian Alps)

NASA Astrophysics Data System (ADS)

Groppelli, B.; Confortola, G.; Soncini, A.; Bocchiola, D.; Rosso, R.

2011-12-01

We merge hydraulic river modelling, use of suitability functions for fish guild colonization and hydrological modelling of catchment response to investigate future (until 2100) hydrological cycle and fish habitat suitability for an Alpine catchment in Italy, Serio river (drainage area 450 Km2, average altitude 1300 m a.s.l., main channel length ca. 36 km). Based upon detailed river channel morphology data for 73 river sections and direct local investigation we then set up and tune a quasi 2-D (i.e. with floodplains) hydraulic model for in channel flows hydraulics, depending upon daily in stream discharge. We then evaluate distributed values of hydraulic variables and therein composite habitat suitability indexes CS for a representative target species (brown trout, Salmo Trutta Fario L.), resulting into usable wetted area WUA for fish colonization. We consider both juvenile JUV and adults AD, and we evaluate the frequency (days in a year/season) of yearly/seasonal, spatially distributed and bulk (whole stream) habitat quality. We then provide synthetic indicators of (yearly/seasonal) suitability level and duration within the river. We then set up a minimal (T, P), properly tuned hydrological model able to mimick Serio river's hydrological cycle. We then use downscaled future precipitation and temperature from three general circulation models, GCMs (PCM, CCSM3, and HadCM3) available within the IPCC's data base chosen for the purpose based upon previous studies, to feed our hydrological model and provide projected hydrological regime of the catchment, together with modified habitat suitability. We then comment upon modified flow regime, habitat suitability as obtained and related uncertainty. The proposed results may be of use for river managers and may provide a template for investigation about future river habitat quality pending climate change.

Variation of medicinal components in a unique geographical accession of horny goat weed Epimedium sagittatum Maxim. (Berberidaceae).

PubMed

Liang, Qiong; Wei, Guoyan; Chen, Jianjun; Wang, Ying; Huang, Hongwen

2012-11-08

Herbal Epimedium species have been widely in Traditional Chinese Medicine for sexual enhancement, immunity improvement, anticancer and anti-aging treatment, with flavonoids and polysaccharides being the major active components. However, exhaustive depletion of wild sources warrants germplasm evaluation and quality resource exploration. A preliminarily analysis had previously indicated that a specific local geographic accession of Epimedium sagittatum found in Luotian (LT) county of Hubei Province (China) had a much higher content of total flavonoids and polysaccharides. In this study, we further investigated the medicinal component variation in the LT type under different light intensities and in different regions by the common-garden experiment. The results indicated a light intensity range of 40-160 μmol/m²/s was the most suitable for the synthesis and accumulation of total flavonoids, while polysaccharide accumulation was negatively correlated with the light intensity. Icariin was the component displaying the highest content among flavonoids, and the content of major flavonoid bioactive components was relatively stable in the third year after cultivation. There was significant correlation between the major flavonol glycoside constituents and the geographic location, and Central China followed by Northern China were the highly suitable regions for cultivation of LT type E. sagittatum. The results revealed that there was a functional balance between flavonoids and polysaccharides at different developmental stages, and the best harvesting stage should consider the primary contents of interest. This study provides important information on the exploration of quality resources, further breeding approaches and cultivation practices of E. sagittatum, and thus the important insights to enhance our understanding of quality control of traditional medicinal plants.

Benchmarking organic micropollutants in wastewater, recycled water and drinking water with in vitro bioassays.

PubMed

Escher, Beate I; Allinson, Mayumi; Altenburger, Rolf; Bain, Peter A; Balaguer, Patrick; Busch, Wibke; Crago, Jordan; Denslow, Nancy D; Dopp, Elke; Hilscherova, Klara; Humpage, Andrew R; Kumar, Anu; Grimaldi, Marina; Jayasinghe, B Sumith; Jarosova, Barbora; Jia, Ai; Makarov, Sergei; Maruya, Keith A; Medvedev, Alex; Mehinto, Alvine C; Mendez, Jamie E; Poulsen, Anita; Prochazka, Erik; Richard, Jessica; Schifferli, Andrea; Schlenk, Daniel; Scholz, Stefan; Shiraishi, Fujio; Snyder, Shane; Su, Guanyong; Tang, Janet Y M; van der Burg, Bart; van der Linden, Sander C; Werner, Inge; Westerheide, Sandy D; Wong, Chris K C; Yang, Min; Yeung, Bonnie H Y; Zhang, Xiaowei; Leusch, Frederic D L

2014-01-01

Thousands of organic micropollutants and their transformation products occur in water. Although often present at low concentrations, individual compounds contribute to mixture effects. Cell-based bioassays that target health-relevant biological endpoints may therefore complement chemical analysis for water quality assessment. The objective of this study was to evaluate cell-based bioassays for their suitability to benchmark water quality and to assess efficacy of water treatment processes. The selected bioassays cover relevant steps in the toxicity pathways including induction of xenobiotic metabolism, specific and reactive modes of toxic action, activation of adaptive stress response pathways and system responses. Twenty laboratories applied 103 unique in vitro bioassays to a common set of 10 water samples collected in Australia, including wastewater treatment plant effluent, two types of recycled water (reverse osmosis and ozonation/activated carbon filtration), stormwater, surface water, and drinking water. Sixty-five bioassays (63%) showed positive results in at least one sample, typically in wastewater treatment plant effluent, and only five (5%) were positive in the control (ultrapure water). Each water type had a characteristic bioanalytical profile with particular groups of toxicity pathways either consistently responsive or not responsive across test systems. The most responsive health-relevant endpoints were related to xenobiotic metabolism (pregnane X and aryl hydrocarbon receptors), hormone-mediated modes of action (mainly related to the estrogen, glucocorticoid, and antiandrogen activities), reactive modes of action (genotoxicity) and adaptive stress response pathway (oxidative stress response). This study has demonstrated that selected cell-based bioassays are suitable to benchmark water quality and it is recommended to use a purpose-tailored panel of bioassays for routine monitoring.

Quality of red blood cells washed using a second wash sequence on an automated cell processor.

PubMed

Hansen, Adele L; Turner, Tracey R; Kurach, Jayme D R; Acker, Jason P

2015-10-01

Washed red blood cells (RBCs) are indicated for immunoglobulin (Ig)A-deficient recipients when RBCs from IgA-deficient donors are not available. Canadian Blood Services recently began using the automated ACP 215 cell processor (Haemonetics Corporation) for RBC washing, and its suitability to produce IgA-deficient RBCs was investigated. RBCs produced from whole blood donations by the buffy coat (BC) and whole blood filtration (WBF) methods were washed using the ACP 215 or the COBE 2991 cell processors and IgA and total protein levels were assessed. A double-wash procedure using the ACP 215 was developed, tested, and validated by assessing hemolysis, hematocrit, recovery, and other in vitro quality variables in RBCs stored after washing, with and without irradiation. A single wash using the ACP 215 did not meet Canadian Standards Association recommendations for washing with more than 2 L of solution and could not consistently reduce IgA to levels suitable for IgA-deficient recipients (24/26 BC RBCs and 0/9 WBF RBCs had IgA levels < 0.05 mg/dL). Using a second wash sequence, all BC and WBF units were washed with more than 2 L and had levels of IgA of less than 0.05 mg/dL. During 7 days' postwash storage, with and without irradiation, double-washed RBCs met quality control criteria, except for the failure of one RBC unit for inadequate (69%) postwash recovery. Using the ACP 215, a double-wash procedure for the production of components for IgA-deficient recipients from either BC or WBF RBCs was developed and validated. © 2015 AABB.

Indicators of the quality of general practice care of patients with chronic illness: a step towards the real involvement of patients in the assessment of the quality of care.

PubMed Central

Wensing, M; Grol, R; van Montfort, P; Smits, A

1996-01-01

OBJECTIVE--To develop a list of indicators of the general practice care of people with chronic illnesses considered important by both patients and practitioners and to identify the indicators that are considered relevant for patient assessment of health care quality. DESIGN--Qualitative study with focus group interviews and a written consensus procedure. SETTING--General practice in the Netherlands in 1993. SUBJECTS--34 patients with chronic illness, mostly members of patient organisations, and 19 general practitioners with expertise in either chronic disease management or experience with patient surveys. MAIN MEASURES--Aspects of general practice care considered important for the delivery of good quality care that emerged from focus group interviews; the relevance of evaluations of 41 aspects of care for patients explored through the written consensus procedure. Those aspects of general practice care agreed to be both important and relevant by patients and general practitioners were considered to be suitable indicators for patient assessment of the quality of care. RESULTS--Patients and general practitioners differed to some extent in their assessment of the aspects of care that they considered important for quality. They agreed that most indicators of care that related to the ¿doctor-patient relation¿ and to ¿information and support¿ were relevant and therefore suitable as indicators for patient assessment of health care quality. There was less agreement about the relevance of indicators of ¿medical and technical care,¿ ¿availability and accessibility,¿ and ¿organisation of services.¿ CONCLUSIONS--Several indicators of the quality of general practice care of patients with chronic illness were thought to be suitable for the patient assessment of healthcare quality, but other indicators were not, mainly because of reservations by general practitioners. IMPLICATIONS-- Qualitative methods can contribute to the selection of indicators for assessment of the quality of health care in areas where scientific evidence is limited or where patients' and providers' preferences are particularly important. PMID:10158595

EFFECTS OF SEASONAL AND WATER QUALITY PARAMETERS ON OYSTERS (CRASSOSTREA VIRGINICA) AND ASSOCIATED FISH POPULATIONS.

EPA Science Inventory

Influence of water quality and seasonal changes on disease prevalence and intensity of Perkinsus marinus, gonadal condition, recruitment potential, growth of caged juvenile oysters, and habitat suitability of reefs for fishes and macrobenthic invertebrates were measured in Callos...

Qualitative Research as a Method for Making Just Comparisons of Pedagogic Quality in Higher Education: A Pilot Study

ERIC Educational Resources Information Center

Abbas, Andrea; McLean, Monica

2007-01-01

Systems designed to ensure that teaching and student learning are of a suitable quality are a feature of universities globally. Quality assurance systems are central to attempts to internationalise higher education, motivated in part by a concern for greater global equality. Yet, if such systems incorporate comparisons, the tendency is to reflect…

Effect of the type of brewing water on the chemical composition, sensory quality and antioxidant capacity of Chinese teas.

PubMed

Xu, Yong-Quan; Zou, Chun; Gao, Ying; Chen, Jian-Xin; Wang, Fang; Chen, Gen-Sheng; Yin, Jun-Feng

2017-12-01

The physicochemical characteristics, sensory quality, and antioxidant activity of tea infusions prepared with purified water (PW), mineral water (MW), mountain spring water (MSW), and tap water (TW) from Hangzhou were investigated. The results showed that the taste quality, catechin concentration, and antioxidant capacity of green, oolong, and black tea infusions prepared using MW and TW were significantly lower than those prepared using PW. Extraction of catechins and caffeine was reduced with high-conductivity water, while high pH influenced the stability of catechins. PW and MSW were more suitable for brewing green and oolong teas, while MSW, with low pH and moderate ion concentration, was the most suitable water for brewing black tea. Lowering the pH of mineral water partially improved the taste quality and increased the concentration of catechins in the infusions. These results aid selection of the most appropriate water for brewing Chinese teas. Copyright © 2016 Elsevier Ltd. All rights reserved.

A global reference database of crowdsourced cropland data collected using the Geo-Wiki platform.

PubMed

Laso Bayas, Juan Carlos; Lesiv, Myroslava; Waldner, François; Schucknecht, Anne; Duerauer, Martina; See, Linda; Fritz, Steffen; Fraisl, Dilek; Moorthy, Inian; McCallum, Ian; Perger, Christoph; Danylo, Olha; Defourny, Pierre; Gallego, Javier; Gilliams, Sven; Akhtar, Ibrar Ul Hassan; Baishya, Swarup Jyoti; Baruah, Mrinal; Bungnamei, Khangsembou; Campos, Alfredo; Changkakati, Trishna; Cipriani, Anna; Das, Krishna; Das, Keemee; Das, Inamani; Davis, Kyle Frankel; Hazarika, Purabi; Johnson, Brian Alan; Malek, Ziga; Molinari, Monia Elisa; Panging, Kripal; Pawe, Chandra Kant; Pérez-Hoyos, Ana; Sahariah, Parag Kumar; Sahariah, Dhrubajyoti; Saikia, Anup; Saikia, Meghna; Schlesinger, Peter; Seidacaru, Elena; Singha, Kuleswar; Wilson, John W

2017-09-26

A global reference data set on cropland was collected through a crowdsourcing campaign using the Geo-Wiki crowdsourcing tool. The campaign lasted three weeks, with over 80 participants from around the world reviewing almost 36,000 sample units, focussing on cropland identification. For quality assessment purposes, two additional data sets are provided. The first is a control set of 1,793 sample locations validated by students trained in satellite image interpretation. This data set was used to assess the quality of the crowd as the campaign progressed. The second data set contains 60 expert validations for additional evaluation of the quality of the contributions. All data sets are split into two parts: the first part shows all areas classified as cropland and the second part shows cropland average per location and user. After further processing, the data presented here might be suitable to validate and compare medium and high resolution cropland maps generated using remote sensing. These could also be used to train classification algorithms for developing new maps of land cover and cropland extent.

Preparation and validation of gross alpha/beta samples used in EML`s quality assessment program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scarpitta, S.C.

1997-10-01

A set of water and filter samples have been incorporated into the existing Environmental Measurements Laboratory`s (EML) Quality Assessment Program (QAP) for gross alpha/beta determinations by participating DOE laboratories. The participating laboratories are evaluated by comparing their results with the EML value. The preferred EML method for measuring water and filter samples, described in this report, uses gas flow proportional counters with 2 in. detectors. Procedures for sample preparation, quality control and instrument calibration are presented. Liquid scintillation (LS) counting is an alternative technique that is suitable for quantifying both the alpha ({sup 241}Am, {sup 230}Th and {sup 238}Pu) andmore » beta ({sup 90}Sr/{sup 90}Y) activity concentrations in the solutions used to prepare the QAP water and air filter samples. Three LS counting techniques (Cerenkov, dual dpm and full spectrum analysis) are compared. These techniques may be used to validate the activity concentrations of each component in the alpha/beta solution before the QAP samples are actually prepared.« less

Multi Response Optimization of Process Parameters Using Grey Relational Analysis for Turning of Al-6061

NASA Astrophysics Data System (ADS)

Deepak, Doreswamy; Beedu, Rajendra

2017-08-01

Al-6061 is one among the most useful material used in manufacturing of products. The major qualities of Aluminium are reasonably good strength, corrosion resistance and thermal conductivity. These qualities have made it a suitable material for various applications. While manufacturing these products, companies strive for reducing the production cost by increasing Material Removal Rate (MRR). Meanwhile, the quality of surface need to be ensured at an acceptable value. This paper aims at bringing a compromise between high MRR and low surface roughness requirement by applying Grey Relational Analysis (GRA). This article presents the selection of controllable parameters like longitudinal feed, cutting speed and depth of cut to arrive at optimum values of MRR and surface roughness (Ra). The process parameters for experiments were selected based on Taguchi’s L9 array with two replications. Grey relation analysis being most suited method for multi response optimization, the same is adopted for the optimization. The result shows that feed rate is the most significant factor that influences MRR and Surface finish.

Theoretical and experimental evaluation of piezo-optic parameters and photoelastic constant in tetragonal PWO.

PubMed

Natali, Pier Paolo; Montalto, Luigi; Daví, Fabrizio; Mengucci, Paolo; Ciriaco, Andrea; Paone, Nicola; Rinaldi, Daniele

2018-02-01

The tetragonal PbWO 4 (PWO) is one of the most important scintillating crystals, being used both in the Compact Muon Solenoid (CMS) experiment at the European Organization for Nuclear Research (CERN) and in the PANDA project at the Facility for Antiproton and Ion Research (FAIR). Light yield and other relevant scintillation properties depend, among many factors, also on the crystal mechanical quality. Accordingly, a detailed knowledge of crystal piezo-optic properties is a mandatory step toward understanding elasto-optic behavior and performing crystal quality control. In this paper, we evaluate for the first time, to the best of our knowledge, by means of both photoelastic and x-ray measurements, some components of the piezo-optic tensor; moreover, when the crystal is acted upon by a uniaxial stress, we obtain an evaluation for the rotation angle of the optic plane under stress as well as the photoelastic constant. These parameters are necessary to detect the residual stresses within the crystal, if any, and to give an overall quality measure. Such a methodology is in general suitable for any tetragonal crystals.

A global reference database of crowdsourced cropland data collected using the Geo-Wiki platform

PubMed Central

Laso Bayas, Juan Carlos; Lesiv, Myroslava; Waldner, François; Schucknecht, Anne; Duerauer, Martina; See, Linda; Fritz, Steffen; Fraisl, Dilek; Moorthy, Inian; McCallum, Ian; Perger, Christoph; Danylo, Olha; Defourny, Pierre; Gallego, Javier; Gilliams, Sven; Akhtar, Ibrar ul Hassan; Baishya, Swarup Jyoti; Baruah, Mrinal; Bungnamei, Khangsembou; Campos, Alfredo; Changkakati, Trishna; Cipriani, Anna; Das, Krishna; Das, Keemee; Das, Inamani; Davis, Kyle Frankel; Hazarika, Purabi; Johnson, Brian Alan; Malek, Ziga; Molinari, Monia Elisa; Panging, Kripal; Pawe, Chandra Kant; Pérez-Hoyos, Ana; Sahariah, Parag Kumar; Sahariah, Dhrubajyoti; Saikia, Anup; Saikia, Meghna; Schlesinger, Peter; Seidacaru, Elena; Singha, Kuleswar; Wilson, John W

2017-01-01

A global reference data set on cropland was collected through a crowdsourcing campaign using the Geo-Wiki crowdsourcing tool. The campaign lasted three weeks, with over 80 participants from around the world reviewing almost 36,000 sample units, focussing on cropland identification. For quality assessment purposes, two additional data sets are provided. The first is a control set of 1,793 sample locations validated by students trained in satellite image interpretation. This data set was used to assess the quality of the crowd as the campaign progressed. The second data set contains 60 expert validations for additional evaluation of the quality of the contributions. All data sets are split into two parts: the first part shows all areas classified as cropland and the second part shows cropland average per location and user. After further processing, the data presented here might be suitable to validate and compare medium and high resolution cropland maps generated using remote sensing. These could also be used to train classification algorithms for developing new maps of land cover and cropland extent. PMID:28949323

A global reference database of crowdsourced cropland data collected using the Geo-Wiki platform

NASA Astrophysics Data System (ADS)

Laso Bayas, Juan Carlos; Lesiv, Myroslava; Waldner, François; Schucknecht, Anne; Duerauer, Martina; See, Linda; Fritz, Steffen; Fraisl, Dilek; Moorthy, Inian; McCallum, Ian; Perger, Christoph; Danylo, Olha; Defourny, Pierre; Gallego, Javier; Gilliams, Sven; Akhtar, Ibrar Ul Hassan; Baishya, Swarup Jyoti; Baruah, Mrinal; Bungnamei, Khangsembou; Campos, Alfredo; Changkakati, Trishna; Cipriani, Anna; Das, Krishna; Das, Keemee; Das, Inamani; Davis, Kyle Frankel; Hazarika, Purabi; Johnson, Brian Alan; Malek, Ziga; Molinari, Monia Elisa; Panging, Kripal; Pawe, Chandra Kant; Pérez-Hoyos, Ana; Sahariah, Parag Kumar; Sahariah, Dhrubajyoti; Saikia, Anup; Saikia, Meghna; Schlesinger, Peter; Seidacaru, Elena; Singha, Kuleswar; Wilson, John W.

2017-09-01

A global reference data set on cropland was collected through a crowdsourcing campaign using the Geo-Wiki crowdsourcing tool. The campaign lasted three weeks, with over 80 participants from around the world reviewing almost 36,000 sample units, focussing on cropland identification. For quality assessment purposes, two additional data sets are provided. The first is a control set of 1,793 sample locations validated by students trained in satellite image interpretation. This data set was used to assess the quality of the crowd as the campaign progressed. The second data set contains 60 expert validations for additional evaluation of the quality of the contributions. All data sets are split into two parts: the first part shows all areas classified as cropland and the second part shows cropland average per location and user. After further processing, the data presented here might be suitable to validate and compare medium and high resolution cropland maps generated using remote sensing. These could also be used to train classification algorithms for developing new maps of land cover and cropland extent.

Automatic orbital GTAW welding: Highest quality welds for tomorrow's high-performance systems

NASA Technical Reports Server (NTRS)

Henon, B. K.

1985-01-01

Automatic orbital gas tungsten arc welding (GTAW) or TIG welding is certain to play an increasingly prominent role in tomorrow's technology. The welds are of the highest quality and the repeatability of automatic weldings is vastly superior to that of manual welding. Since less heat is applied to the weld during automatic welding than manual welding, there is less change in the metallurgical properties of the parent material. The possibility of accurate control and the cleanliness of the automatic GTAW welding process make it highly suitable to the welding of the more exotic and expensive materials which are now widely used in the aerospace and hydrospace industries. Titanium, stainless steel, Inconel, and Incoloy, as well as, aluminum can all be welded to the highest quality specifications automatically. Automatic orbital GTAW equipment is available for the fusion butt welding of tube-to-tube, as well as, tube to autobuttweld fittings. The same equipment can also be used for the fusion butt welding of up to 6 inch pipe with a wall thickness of up to 0.154 inches.

Toward edge minability for role mining in bipartite networks

NASA Astrophysics Data System (ADS)

Dong, Lijun; Wang, Yi; Liu, Ran; Pi, Benjie; Wu, Liuyi

2016-11-01

Bipartite network models have been extensively used in information security to automatically generate role-based access control (RBAC) from dataset. This process is called role mining. However, not all the topologies of bipartite networks are suitable for role mining; some edges may even reduce the quality of role mining. This causes unnecessary time consumption as role mining is NP-hard. Therefore, to promote the quality of role mining results, the capability that an edge composes roles with other edges, called the minability of edge, needs to be identified. We tackle the problem from an angle of edge importance in complex networks; that is an edge easily covered by roles is considered to be more important. Based on this idea, the k-shell decomposition of complex networks is extended to reveal the different minability of edges. By this way, a bipartite network can be quickly purified by excluding the low-minability edges from role mining, and thus the quality of role mining can be effectively improved. Extensive experiments via the real-world datasets are conducted to confirm the above claims.

Effects of rotor parameter variations on handling qualities of unaugmented helicopters in simulated terrain flight

NASA Technical Reports Server (NTRS)

Talbot, P. D.; Dugan, D. D.; Chen, R. T. N.; Gerdes, R. M.

1980-01-01

A coordinated analysis and ground simulator experiment was performed to investigate the effects on single rotor helicopter handling qualities of systematic variations in the main rotor hinge restraint, hub hinge offset, pitch-flap coupling, and blade lock number. Teetering rotor, articulated rotor, and hingeless rotor helicopters were evaluated by research pilots in special low level flying tasks involving obstacle avoidance at 60 to 100 knots airspeed. The results of the experiment are in the form of pilot ratings, pilot commentary, and some objective performance measures. Criteria for damping and sensitivity are reexamined when combined with the additional factors of cross coupling due to pitch and roll rates, pitch coupling with collective pitch, and longitudinal static stability. Ratings obtained with and without motion are compared. Acceptable flying qualities were obtained within each rotor type by suitable adjustment of the hub parameters, however, pure teetering rotors were found to lack control power for the tasks. A limit for the coupling parameter L sub q/L sub p of 0.35 is suggested.

Using a Marginal Structural Model to Design a Theory-Based Mass Media Campaign.

PubMed

Nishiuchi, Hiromu; Taguri, Masataka; Ishikawa, Yoshiki

2016-01-01

The essential first step in the development of mass media health campaigns is to identify specific beliefs of the target audience. The challenge is to prioritize suitable beliefs derived from behavioral theory. The purpose of this study was to identify suitable beliefs to target in a mass media campaign to change behavior using a new method to estimate the possible effect size of a small set of beliefs. Data were drawn from the 2010 Japanese Young Female Smoker Survey (n = 500), conducted by the Japanese Ministry of Health, Labor and Welfare. Survey measures included intention to quit smoking, psychological beliefs (attitude, norms, and perceived control) based on the theory of planned behavior and socioeconomic status (age, education, household income, and marital status). To identify suitable candidate beliefs for a mass media health campaign, we estimated the possible effect size required to change the intention to quit smoking among the population of young Japanese women using the population attributable fraction from a marginal structural model. Thirteen percent of study participants intended to quit smoking. The marginal structural model estimated a population attributable fraction of 47 psychological beliefs (21 attitudes, 6 norms, and 19 perceived controls) after controlling for socioeconomic status. The belief, "I could quit smoking if my husband or significant other recommended it" suggested a promising target for a mass media campaign (population attributable fraction = 0.12, 95% CI = 0.02-0.23). Messages targeting this belief could possibly improve intention rates by up to 12% among this population. The analysis also suggested the potential for regulatory action. This study proposed a method by which campaign planners can develop theory-based mass communication strategies to change health behaviors at the population level. This method might contribute to improving the quality of future mass health communication strategies and further research is needed.

Using a Marginal Structural Model to Design a Theory-Based Mass Media Campaign

PubMed Central

Taguri, Masataka; Ishikawa, Yoshiki

2016-01-01

Background The essential first step in the development of mass media health campaigns is to identify specific beliefs of the target audience. The challenge is to prioritize suitable beliefs derived from behavioral theory. The purpose of this study was to identify suitable beliefs to target in a mass media campaign to change behavior using a new method to estimate the possible effect size of a small set of beliefs. Methods Data were drawn from the 2010 Japanese Young Female Smoker Survey (n = 500), conducted by the Japanese Ministry of Health, Labor and Welfare. Survey measures included intention to quit smoking, psychological beliefs (attitude, norms, and perceived control) based on the theory of planned behavior and socioeconomic status (age, education, household income, and marital status). To identify suitable candidate beliefs for a mass media health campaign, we estimated the possible effect size required to change the intention to quit smoking among the population of young Japanese women using the population attributable fraction from a marginal structural model. Results Thirteen percent of study participants intended to quit smoking. The marginal structural model estimated a population attributable fraction of 47 psychological beliefs (21 attitudes, 6 norms, and 19 perceived controls) after controlling for socioeconomic status. The belief, “I could quit smoking if my husband or significant other recommended it” suggested a promising target for a mass media campaign (population attributable fraction = 0.12, 95% CI = 0.02–0.23). Messages targeting this belief could possibly improve intention rates by up to 12% among this population. The analysis also suggested the potential for regulatory action. Conclusions This study proposed a method by which campaign planners can develop theory-based mass communication strategies to change health behaviors at the population level. This method might contribute to improving the quality of future mass health communication strategies and further research is needed. PMID:27441626

Effectiveness of conservation easements in agricultural regions.

PubMed

Braza, Mark

2017-08-01

Conservation easements are a standard technique for preventing habitat loss, particularly in agricultural regions with extensive cropland cultivation, yet little is known about their effectiveness. I developed a spatial econometric approach to propensity-score matching and used the approach to estimate the amount of habitat loss prevented by a grassland conservation easement program of the U.S. federal government. I used a spatial autoregressive probit model to predict tract enrollment in the easement program as of 2001 based on tract agricultural suitability, habitat quality, and spatial interactions among neighboring tracts. Using the predicted values from the model, I matched enrolled tracts with similar unenrolled tracts to form a treatment group and a control group. To measure the program's impact on subsequent grassland loss, I estimated cropland cultivation rates for both groups in 2014 with a second spatial probit model. Between 2001 and 2014, approximately 14.9% of control tracts were cultivated and 0.3% of treated tracts were cultivated. Therefore, approximately 14.6% of the protected land would have been cultivated in the absence of the program. My results demonstrate that conservation easements can significantly reduce habitat loss in agricultural regions; however, the enrollment of tracts with low cropland suitability may constrain the amount of habitat loss they prevent. My results also show that spatial econometric models can improve the validity of control groups and thereby strengthen causal inferences about program effectiveness in situations when spatial interactions influence conservation decisions. © 2017 Society for Conservation Biology.

Temporal and spatial changes of water quality and management strategies of Dianchi Lake in southwest China

NASA Astrophysics Data System (ADS)

Zhang, T.; Zeng, W. H.; Wang, S. R.; Ni, Z. K.

2013-12-01

Temporal and spatial changes to the water quality of Dianchi Lake in Southwest China were investigated using monthly monitoring data from 2005 to 2012. Based on the analysis of total phosphorus (TP), total nitrogen (TN), and chlorophyll a (Chl a) concentrations, it was determined that, in Caohai Lake, the annual concentrations of these variables ranged from 0.19-1.46, 6.11-16.79, 0.06-0.14 mg L-1, respectively. In addition, the annual concentrations of TP, TN and Chl a in Waihai Lake ranged between 0.13-0.20, 1.82-3.01, 0.04-0.09 mg L-1, respectively. Cluster Analysis (CA) classified the 10 monitoring sites into two groups (group A and group B) based on similarities of water quality characteristics. Our data revealed that the current status of water quality within Caohai Lake was much worse than that of Waihai Lake. Water quality was seriously degraded during the economic boom near the period of the "Eleventh Five-Year Plan" (2005-2010), and gradually improved from 2010 to 2012 because of the "standard emission directive to industry". The main factors that influenced the spatial and temporal changes to water quality were natural factors including lake evolution and regional characteristic as well as human factors such as pollution load into the lake and management strategies that were already adopted. Some activities and regulations were implemented to enhance the lake environment by controlling wastewater emissions and establishing regulations to protect the lakes in the Yunnan Province. However, problems with institutional fragmentation (horizontal and vertical), simple treatment methods, low-intensity investment in pollution control, and lack of meaningful endogenous pollution control strategies were still present in the lake management strategy. To solve these problems, suitable control measures are needed, especially considering the current old-age status of Dianchi Lake. The fundamental improvement of the water quality within Caohai Lake was dependent on the measures taken in the upper reaches of the Caohai Watershed, including further recovery of submerged plants, resource utilization by floating plants and the reinforcement of sediment disposal. Management strategies for endogenous pollution in Waihai Lake were mainly dependent on restocking algae-eating fish and the ecological restoration of macrophytes. In this way, the swamping trend and the ageing process that is occurring in Dianchi Lake can be stunted.

Applicability of market-based instruments for safeguarding water quality in coastal waterways: Case study for Darwin Harbour, Australia

NASA Astrophysics Data System (ADS)

Greiner, Romy

2014-02-01

Water pollution of coastal waterways is a complex problem due to the cocktail of pollutants and multiplicity of polluters involved and pollution characteristics. Pollution control therefore requires a combination of policy instruments. This paper examines the applicability of market-based instruments to achieve effective and efficient water quality management in Darwin Harbour, Northern Territory, Australia. Potential applicability of instruments is examined in the context of biophysical and economic pollution characteristics, and experience with instruments elsewhere. The paper concludes that there is potential for inclusion of market-based instruments as part of an instrument mix to safeguard water quality in Darwin Harbour. It recommends, in particular, expanding the existing licencing system to include quantitative pollution limits for all significant point polluters; comprehensive and independent pollution monitoring across Darwin Harbour; public disclosure of water quality and emissions data; positive incentives for landholders in the Darwin Harbour catchment to improve land management practices; a stormwater offset program for greenfield urban developments; adoption of performance bonds for developments and operations which pose a substantial risk to water quality, including port expansion and dredging; and detailed consideration of a bubble licensing scheme for nutrient pollution. The paper offers an analytical framework for policy makers and resource managers tasked with water quality management in coastal waterways elsewhere in Australia and globally, and helps to scan for MBIs suitable in any given environmental management situation.

Analytical chemistry in water quality monitoring during manned space missions

NASA Astrophysics Data System (ADS)

Artemyeva, Anastasia A.

2016-09-01

Water quality monitoring during human spaceflights is essential. However, most of the traditional methods require sample collection with a subsequent ground analysis because of the limitations in volume, power, safety and gravity. The space missions are becoming longer-lasting; hence methods suitable for in-flight monitoring are demanded. Since 2009, water quality has been monitored in-flight with colorimetric methods allowing for detection of iodine and ionic silver. Organic compounds in water have been monitored with a second generation total organic carbon analyzer, which provides information on the amount of carbon in water at both the U.S. and Russian segments of the International Space Station since 2008. The disadvantage of this approach is the lack of compound-specific information. The recently developed methods and tools may potentially allow one to obtain in-flight a more detailed information on water quality. Namely, the microanalyzers based on potentiometric measurements were designed for online detection of chloride, potassium, nitrate ions and ammonia. The recent application of the current highly developed air quality monitoring system for water analysis was a logical step because most of the target analytes are the same in air and water. An electro-thermal vaporizer was designed, manufactured and coupled with the air quality control system. This development allowed for liberating the analytes from the aqueous matrix and further compound-specific analysis in the gas phase.

Fast microwave-assisted acidolysis: a new biorefinery approach for the zero-waste utilisation of lignocellulosic biomass to produce high quality lignin and fermentable saccharides.

PubMed

Zhou, Long; Santomauro, Fabio; Fan, Jiajun; Macquarrie, Duncan; Clark, James; Chuck, Christopher J; Budarin, Vitaliy

2017-09-21

Generally, biorefineries convert lignocellulosic biomass into a range of biofuels and further value added chemicals. However, conventional biorefinery processes focus mainly on the cellulose and hemicellulose fractions and therefore produce only low quality lignin, which is commonly burnt to provide process heat. To make full use of the biomass, more attention needs to be focused on novel separation techniques, where high quality lignin can be isolated that is suitable for further valorisation into aromatic chemicals and fuel components. In this paper, three types of lignocellulosic biomass (softwood, hardwood and herbaceous biomass) were processed by microwave-assisted acidolysis to produce high quality lignin. The lignin from the softwood was isolated largely intact in the solid residue after acidolysis. For example, a 10 min microwave-assisted acidolysis treatment produced lignin with a purity of 93% and in a yield of 82%, which is superior to other conventional separation methods reported. Furthermore, py-GC/MS analysis proved that the isolated lignin retained the original structure of native lignin in the feedstock without severe chemical modification. This is a large advantage, and the purified lignin is suitable for further chemical processing. To assess the suitability of this methodology as part of a biorefinery system, the aqueous phase, produced after acidolysis of the softwood, was characterised and assessed for its suitability for fermentation. The broth contained some mono- and di-saccharides but mainly contained organic acids, oligosaccharides and furans. While this is unsuitable for S. cerevisiae and other common ethanol producing yeasts, two oleaginous yeasts with known inhibitor tolerances were selected: Cryptococcus curvatus and Metschnikowia pulcherrima. Both yeasts could grow on the broth, and demonstrated suitable catabolism of the oligosaccharides and inhibitors over 7 days. In addition, both yeasts were shown to be able to produce an oil with a similar composition to that of palm oil. This preliminary work demonstrates new protocols of microwave-assisted acidolysis and therefore offers an effective approach to produce high purity lignin and fermentable chemicals, which is a key step towards developing a zero-waste lignocellulosic biorefinery.

Predicting Fish Growth Potential and Identifying Water Quality Constraints: A Spatially-Explicit Bioenergetics Approach

NASA Astrophysics Data System (ADS)

Budy, Phaedra; Baker, Matthew; Dahle, Samuel K.

2011-10-01

Anthropogenic impairment of water bodies represents a global environmental concern, yet few attempts have successfully linked fish performance to thermal habitat suitability and fewer have distinguished co-varying water quality constraints. We interfaced fish bioenergetics, field measurements, and Thermal Remote Imaging to generate a spatially-explicit, high-resolution surface of fish growth potential, and next employed a structured hypothesis to detect relationships among measures of fish performance and co-varying water quality constraints. Our thermal surface of fish performance captured the amount and spatial-temporal arrangement of thermally-suitable habitat for three focal species in an extremely heterogeneous reservoir, but interpretation of this pattern was initially confounded by seasonal covariation of water residence time and water quality. Subsequent path analysis revealed that in terms of seasonal patterns in growth potential, catfish and walleye responded to temperature, positively and negatively, respectively; crappie and walleye responded to eutrophy (negatively). At the high eutrophy levels observed in this system, some desired fishes appear to suffer from excessive cultural eutrophication within the context of elevated temperatures whereas others appear to be largely unaffected or even enhanced. Our overall findings do not lead to the conclusion that this system is degraded by pollution; however, they do highlight the need to use a sensitive focal species in the process of determining allowable nutrient loading and as integrators of habitat suitability across multiple spatial and temporal scales. We provide an integrated approach useful for quantifying fish growth potential and identifying water quality constraints on fish performance at spatial scales appropriate for whole-system management.

Glass bead cultivation of fungi: combining the best of liquid and agar media.

PubMed

Droce, Aida; Sørensen, Jens Laurids; Giese, Henriette; Sondergaard, Teis Esben

2013-09-01

Production of bioactive compounds and enzymes from filamentous fungi is highly dependent on cultivation conditions. Here we present an easy way to cultivate filamentous fungi on glass beads that allow complete control of nutrient supply. Secondary metabolite production in Fusarium graminearum and Fusarium solani cultivated on agar plates, in shaking liquid culture or on glass beads was compared. Agar plate culture and glass bead cultivation yielded comparable results while liquid culture had lower production of secondary metabolites. RNA extraction from glass beads and liquid cultures was easier than from agar plates and the quality was superior. The system allows simple control of nutrient availability throughout fungal cultivation. This combined with the ease of extraction of nucleic acids and metabolites makes the system highly suitable for the study of gene regulation in response to specific nutrient factors. © 2013.

Experimental realization of non-adiabatic universal quantum gates using geometric Landau-Zener-Stückelberg interferometry

PubMed Central

Wang, Li; Tu, Tao; Gong, Bo; Zhou, Cheng; Guo, Guang-Can

2016-01-01

High fidelity universal gates for quantum bits form an essential ingredient of quantum information processing. In particular, geometric gates have attracted attention because they have a higher intrinsic resistance to certain errors. However, their realization remains a challenge because of the need for complicated quantum control on a multi-level structure as well as meeting the adiabatic condition within a short decoherence time. Here, we demonstrate non-adiabatic quantum operations for a two-level system by applying a well-controlled geometric Landau-Zener-Stückelberg interferometry. By characterizing the gate quality, we also investigate the operation in the presence of realistic dephasing. Furthermore, the result provides an essential model suitable for understanding an interplay of geometric phase and Landau-Zener-Stückelberg process which are well explored separately. PMID:26738875

Camouflage for vitiligo.

PubMed

Tanioka, Miki; Miyachi, Yoshiki

2009-01-01

Cosmetic camouflage is indispensable for patients with vitiligo and can result in an improvement of their quality of life. Recent cosmetic advances enabled camouflage to obtain a suitable color match and keep it waterproof. However, camouflage needs some techniques. Therefore, patient education through a camouflage lesson is required to enjoy camouflage. Here the authors introduced a few tips for suitable camouflage, which were devised through camouflage lessons.

A Biopharmaceutical Industry Perspective on the Control of Visible Particles in Biotechnology-Derived Injectable Drug Products.

PubMed

Mathonet, Serge; Mahler, Hanns-Christian; Esswein, Stefan T; Mazaheri, Maryam; Cash, Patricia W; Wuchner, Klaus; Kallmeyer, Georg; Das, Tapan K; Finkler, Christof; Lennard, Andrew

2016-01-01

Regulatory monographs in Europe and the United States require drug products for parenteral administration to be "practically free" or "essentially free" of visible particles, respectively. Both terms have been used interchangeably and acknowledge the probabilistic nature of visual particle inspection. The probability of seeing a particle in a drug product container varies according to the size and nature of the particles as well as container and inspection conditions. Therefore, the term "without visible particles" can be highly misleading in the context of what is practically achievable. This may lead to differences in understanding between industry practitioners and regulatory agencies. Is this term intended to mean "zero particles", or is there any intention to distinguish between particle type such as "zero extraneous visible particles" or "zero proteinaceous particles"? Furthermore, how can "zero" particles as a criterion for release testing be reconciled with "practically free from particles" as stated in the definition and a low, justified level of proteinaceous particles after production?The purpose of this position paper is to review best practices in the industry in terms of visual inspection process and associated operator training, quality control sampling, testing, and setting acceptance criteria corresponding to "practically free of visible particles" and providing considerations when visible proteinaceous particles are deemed unavoidable. It also provides a brief overview of visible particle characterization and gives perspectives on patient safety. This position paper applies to biotechnology-derived drug products including monoclonal antibodies in late-phase development to licensed products. In the 2011 monoclonal antibody monograph revision, European Pharmacopoeia experts acknowledged that protein products may also contain proteinaceous particles at release or that protein particles may form during storage. Indeed, industry experience has demonstrated that therapeutic proteins such as monoclonal antibodies can exhibit a propensity for self-association leading to the formation of aggregates that range in size from nanometres (oligomers) to microns (subvisible and visible particles). As a result, the requirement for drug product appearance for monoclonal antibodies was changed from "without visible particles" to "without visible particles unless otherwise authorised or justified". In our view, "practically free from particles" should be considered a suitable acceptance criterion for injectable biotechnology and small-molecule products, as long as appropriately defined. Furthermore, we argue that visual inspection is a suitable quality control release test and that "practically free from particles" is a suitable specification when adequately described. © PDA, Inc. 2016.

Empirical evaluation of humpback whale telomere length estimates; quality control and factors causing variability in the singleplex and multiplex qPCR methods.

PubMed

Olsen, Morten Tange; Bérubé, Martine; Robbins, Jooke; Palsbøll, Per J

2012-09-06

Telomeres, the protective cap of chromosomes, have emerged as powerful markers of biological age and life history in model and non-model species. The qPCR method for telomere length estimation is one of the most common methods for telomere length estimation, but has received recent critique for being too error-prone and yielding unreliable results. This critique coincides with an increasing awareness of the potentials and limitations of the qPCR technique in general and the proposal of a general set of guidelines (MIQE) for standardization of experimental, analytical, and reporting steps of qPCR. In order to evaluate the utility of the qPCR method for telomere length estimation in non-model species, we carried out four different qPCR assays directed at humpback whale telomeres, and subsequently performed a rigorous quality control to evaluate the performance of each assay. Performance differed substantially among assays and only one assay was found useful for telomere length estimation in humpback whales. The most notable factors causing these inter-assay differences were primer design and choice of using singleplex or multiplex assays. Inferred amplification efficiencies differed by up to 40% depending on assay and quantification method, however this variation only affected telomere length estimates in the worst performing assays. Our results suggest that seemingly well performing qPCR assays may contain biases that will only be detected by extensive quality control. Moreover, we show that the qPCR method for telomere length estimation can be highly precise and accurate, and thus suitable for telomere measurement in non-model species, if effort is devoted to optimization at all experimental and analytical steps. We conclude by highlighting a set of quality controls which may serve for further standardization of the qPCR method for telomere length estimation, and discuss some of the factors that may cause variation in qPCR experiments.

Empirical evaluation of humpback whale telomere length estimates; quality control and factors causing variability in the singleplex and multiplex qPCR methods

PubMed Central

2012-01-01

Background Telomeres, the protective cap of chromosomes, have emerged as powerful markers of biological age and life history in model and non-model species. The qPCR method for telomere length estimation is one of the most common methods for telomere length estimation, but has received recent critique for being too error-prone and yielding unreliable results. This critique coincides with an increasing awareness of the potentials and limitations of the qPCR technique in general and the proposal of a general set of guidelines (MIQE) for standardization of experimental, analytical, and reporting steps of qPCR. In order to evaluate the utility of the qPCR method for telomere length estimation in non-model species, we carried out four different qPCR assays directed at humpback whale telomeres, and subsequently performed a rigorous quality control to evaluate the performance of each assay. Results Performance differed substantially among assays and only one assay was found useful for telomere length estimation in humpback whales. The most notable factors causing these inter-assay differences were primer design and choice of using singleplex or multiplex assays. Inferred amplification efficiencies differed by up to 40% depending on assay and quantification method, however this variation only affected telomere length estimates in the worst performing assays. Conclusion Our results suggest that seemingly well performing qPCR assays may contain biases that will only be detected by extensive quality control. Moreover, we show that the qPCR method for telomere length estimation can be highly precise and accurate, and thus suitable for telomere measurement in non-model species, if effort is devoted to optimization at all experimental and analytical steps. We conclude by highlighting a set of quality controls which may serve for further standardization of the qPCR method for telomere length estimation, and discuss some of the factors that may cause variation in qPCR experiments. PMID:22954451

Feasibility and effects of a combined adjuvant high-intensity interval/strength training in breast cancer patients: a single-center pilot study.

PubMed

Schulz, Sebastian Viktor Waldemar; Laszlo, Roman; Otto, Stephanie; Prokopchuk, Dmytro; Schumann, Uwe; Ebner, Florian; Huober, Jens; Steinacker, Jürgen Michael

2018-06-01

To evaluate feasibility of an exercise intervention consisting of high-intensity interval endurance and strength training in breast cancer patients. Twenty-six women with nonmetastatic breast cancer were consecutively assigned to the exercise intervention- (n= 15, mean age 51.9 ± 9.8 years) and the control group (n = 11, mean age 56.9 ± 7.0 years). Cardiopulmonary exercise testing that included lactate sampling, one-repetition maximum tests and a HADS-D questionnaire were used to monitor patients both before and after a supervised six weeks period of either combined high-intensity interval endurance and strength training (intervention group, twice a week) or leisure training (control group). Contrarily to the control group, endurance (mean change of VO 2 , peak 12.0 ± 13.0%) and strength performance (mean change of cumulative load 25.9 ± 11.2%) and quality of life increased in the intervention group. No training-related adverse events were observed. Our guided exercise intervention could be used effectively for initiation and improvement of performance capacity and quality of life in breast cancer patients in a relatively short time. This might be especially attractive during medical treatment. Long-term effects have to be evaluated in randomized controlled studies also with a longer follow-up. Implications for Rehabilitation High-intensity interval training allows improvement of aerobic capacity within a comparable short time. Standard leisure training in breast cancer patients is rather suitable for the maintenance of performance capacity and quality of life. Guided high-intensity interval training combined with strength training can be used effectively for the improvement of endurance and strength capacity and also quality of life. After exclusion of contraindications, guided adjuvant high-intensity interval training combined with strength training can be safely used in breast cancer patients.

Combining Nordtest method and bootstrap resampling for measurement uncertainty estimation of hematology analytes in a medical laboratory.

PubMed

Cui, Ming; Xu, Lili; Wang, Huimin; Ju, Shaoqing; Xu, Shuizhu; Jing, Rongrong

2017-12-01

Measurement uncertainty (MU) is a metrological concept, which can be used for objectively estimating the quality of test results in medical laboratories. The Nordtest guide recommends an approach that uses both internal quality control (IQC) and external quality assessment (EQA) data to evaluate the MU. Bootstrap resampling is employed to simulate the unknown distribution based on the mathematical statistics method using an existing small sample of data, where the aim is to transform the small sample into a large sample. However, there have been no reports of the utilization of this method in medical laboratories. Thus, this study applied the Nordtest guide approach based on bootstrap resampling for estimating the MU. We estimated the MU for the white blood cell (WBC) count, red blood cell (RBC) count, hemoglobin (Hb), and platelets (Plt). First, we used 6months of IQC data and 12months of EQA data to calculate the MU according to the Nordtest method. Second, we combined the Nordtest method and bootstrap resampling with the quality control data and calculated the MU using MATLAB software. We then compared the MU results obtained using the two approaches. The expanded uncertainty results determined for WBC, RBC, Hb, and Plt using the bootstrap resampling method were 4.39%, 2.43%, 3.04%, and 5.92%, respectively, and 4.38%, 2.42%, 3.02%, and 6.00% with the existing quality control data (U [k=2]). For WBC, RBC, Hb, and Plt, the differences between the results obtained using the two methods were lower than 1.33%. The expanded uncertainty values were all less than the target uncertainties. The bootstrap resampling method allows the statistical analysis of the MU. Combining the Nordtest method and bootstrap resampling is considered a suitable alternative method for estimating the MU. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Improving NGDC Track-line Data Quality Control

NASA Astrophysics Data System (ADS)

Chandler, M. T.; Wessel, P.

2004-12-01

Ship-board gravity, magnetic and bathymetry data archived at the National Geophysical Data Center (NGDC) represent decades of seagoing research, containing over 4,500 cruises. Cruise data remain relevent despite the prominence of satellite altimetry-derived global grids because many geologic processes remain resolvable by oceanographic research alone. Due to the tremendous investment put forth by scientists and taxpayers to compile this vast archive and the significant errors found within it, additional quality assessment and corrections are warranted. These can best be accomplished by adding to existing quality control measures at NGDC. We are currently developing open source software to provide additional quality control. Along with NGDC's current sanity checking, new data at NGDC will also be subjected to an along-track ``sniffer'' which will detect and flag suspicious data for later graphical inspection using a visual editor. If new data pass these tests, they will undergo further scrutinization using a crossover error (COE) calculator which will compare new data values to existing values at points of intersection within the archive. Data passing these tests will be deemed ``quality data`` and suitable for permanent addition to the archive, while data that fail will be returned to the source institution for correction. Crossover errors will be stored and an online COE database will be available. The COE database will allow users to apply corrections to the NGDC track-line database to produce corrected data files. At no time will the archived data itself be modified. An attempt will also be made to reduce navigational errors for pre-GPS navigated cruises. Upon completion these programs will be used to explore and model systematic errors within the archive, generate correction tables for all cruises, and to quantify the error budget in marine geophysical observations. Software will be released and these procedures will be implemented in cooperation with NGDC staff.

Validation of a two-dimensional liquid chromatography method for quality control testing of pharmaceutical materials.

PubMed

Yang, Samuel H; Wang, Jenny; Zhang, Kelly

2017-04-07

Despite the advantages of 2D-LC, there is currently little to no work in demonstrating the suitability of these 2D-LC methods for use in a quality control (QC) environment for good manufacturing practice (GMP) tests. This lack of information becomes more critical as the availability of commercial 2D-LC instrumentation has significantly increased, and more testing facilities begin to acquire these 2D-LC capabilities. It is increasingly important that the transferability of developed 2D-LC methods be assessed in terms of reproducibility, robustness and performance across different laboratories worldwide. The work presented here focuses on the evaluation of a heart-cutting 2D-LC method used for the analysis of a pharmaceutical material, where a key, co-eluting impurity in the first dimension ( 1 D) is resolved from the main peak and analyzed in the second dimension ( 2 D). A design-of-experiments (DOE) approach was taken in the collection of the data, and the results were then modeled in order to evaluate method robustness using statistical modeling software. This quality by design (QBD) approach gives a deeper understanding of the impact of these 2D-LC critical method attributes (CMAs) and how they affect overall method performance. Although there are multiple parameters that may be critical from method development point of view, a special focus of this work is devoted towards evaluation of unique 2D-LC critical method attributes from method validation perspective that transcend conventional method development and validation. The 2D-LC method attributes are evaluated for their recovery, peak shape, and resolution of the two co-eluting compounds in question on the 2 D. In the method, linearity, accuracy, precision, repeatability, and sensitivity are assessed along with day-to-day, analyst-to-analyst, and lab-to-lab (instrument-to-instrument) assessments. The results of this validation study demonstrate that the 2D-LC method is accurate, sensitive, and robust and is ultimately suitable for QC testing with good method transferability. Copyright © 2017 Elsevier B.V. All rights reserved.

Review and comparison of quality standards, guidelines and regulations for laboratories.

PubMed

Datema, Tjeerd A M; Oskam, Linda; Klatser, Paul R

2012-01-01

The variety and number of laboratory quality standards, guidelines and regulations (hereafter: quality documents) makes it difficult to choose the most suitable one for establishing and maintaining a laboratory quality management system. There is a need to compare the characteristics, suitability and applicability of quality documents in view of the increasing efforts to introduce quality management in laboratories, especially in clinical diagnostic laboratories in low income and middle income countries. This may provide valuable insights for policy makers developing national laboratory policies, and for laboratory managers and quality officers in choosing the most appropriate quality document for upgrading their laboratories. We reviewed the history of quality document development and then selected a subset based on their current use. We analysed these documents following a framework for comparison of quality documents that was adapted from the Clinical Laboratory Standards Institute guideline GP26 Quality management system model for clinical laboratory services . Differences were identified between national and international, and non-clinical and clinical quality documents. The most salient findings were the absence of provisions on occurrence management and customer service in almost all non-clinical quality documents, a low number of safety requirements aimed at protecting laboratory personnel in international quality documents and no requirements regarding ethical behaviour in almost all quality documents. Each laboratory needs to investigate whether national regulatory standards are present. These are preferred as they most closely suit the needs of laboratories in the country. A laboratory should always use both a standard and a guideline: a standard sums up the requirements to a quality management system, a guideline describes how quality management can be integrated in the laboratory processes.

Magnitude of genotype x environment interactions affecting tomato fruit quality

USDA-ARS?s Scientific Manuscript database

There is a growing interest by consumers to purchase fresh tomato with improved quality traits including lycopene, total soluble solids (TSS), vitamin C and titratable acid (TA) content. Therefore, there are considerable efforts by tomato breeders to improve tomato for these traits. However, suitabl...

40 CFR 141.66 - Maximum contaminant levels for radionuclides.

Code of Federal Regulations, 2010 CFR

2010-07-01

... quality range andconsiderations. 1 1. Ion exchange (IE) (a) Intermediate All ground waters. 2. Point of.... Lime softening (d) Advanced All waters. 6. Green sand filtration (e) Basic. 7. Co-precipitation with Barium sulfate (f) Intermediate to Advanced Ground waters with suitable water quality. 8. Electrodialysis...

Thue-Morse nanostructures for tunable light extraction in the visible region

NASA Astrophysics Data System (ADS)

Rippa, M.; Castagna, R.; Marino, A.; Tkachenko, V.; Palermo, G.; Pane, A.; Umeton, C.; Tabiryan, N.; Petti, L.

2018-05-01

Controlling light propagation at the nanoscale is a fascinating opportunity offered by modern photonics, more than a challenge to face off. This study is aimed at investigating a particular kind of nanocomposite and reconfigurable optical metamaterials that can be exploited for the realization of a new class of switchable photonic devices, representing a breakthrough with respect to the state of the art. Existing photonic devices exhibit, in general, a drawback in the absence of tunability; this work aims to the design and characterization of metamaterials exploiting reconfigurable media, like LCs, which enable realization of a tunable, high quality, photonic quasi-crystal based switchable mode selector. It turned out that, starting from an unpolarized white light source, through a light extraction mechanism based on the diffraction of light, the high quality structure, combined with a uniformly aligned Photo-responsive Liquid Crystal (PLC), is able to give rise to an extremely narrow (FWHM ≈5 nm) and linearly polarized single mode peak of the extracted light intensity. Moreover, we have shown that the spectral properties (switching) of the samples can be finely controlled by using both an external applied voltage and a suitable pump light source with a maximum increase of 45% of the extracted light. Finally, both Scanning Electron Microscopy (SEM) and Far Field Diffraction (FFD) analysis have shown the high quality morphology of the realized structure.

Simultaneous quantification of six main active constituents in Chinese Angelica by high-performance liquid chromatography with photodiode array detector

PubMed Central

Ying, Li; Si-Wang, Wang; Hong-Hai, Tu; Wei, Cao

2013-01-01

Background: Angelica sinensis is a famous traditional Chinese medicinalherb, which is predominantly used in the treatment of gynecological conditions. It is the first report for the simultaneous determination of six major active components in Chinese Angelica, which is important for quality control. Objective: A validated HPLC-PAD method was first developed to evaluate the quality of crude and processed Radix Angelica through simultaneous determination of six bioactive compounds, namely ferulic acid, senkyunolide I, senkyunolide H, coniferyl ferulate, Z/E-ligustilide and Z/E-butylidenephthalide. Materials and Methods: Samples were separated on a Xtimate™C18 column (250 × 4.6 mm, 5 μm) and detected by PAD. Mobile phase was composed of (A) aqueous phosphoric acid (0.02%, v/v) and (B) acetonitrile (MeCN) (including 10% tetrahydrofuran, v/v) using a gradient elution. Analytes were performed at 30°C with a flow rate of 1.0 mL/min. Results: All calibration curves showed good linear regression (r2 ≥ 0.9963) within the tested ranges, and the recovery of the method was in the range of 91.927–105.859%. Conclusion: The results demonstrate that the developed method is accurate and reproducible and could be readily utilized as a suitable quality control method for the quantification of Radix Angelica. PMID:23772106

Simulation and evaluation of pollution load reduction scenarios for water environmental management: a case study of inflow river of Taihu Lake, China.

PubMed

Zhang, Ruibin; Qian, Xin; Zhu, Wenting; Gao, Hailong; Hu, Wei; Wang, Jinhua

2014-09-09

In the beginning of the 21st century, the deterioration of water quality in Taihu Lake, China, has caused widespread concern. The primary source of pollution in Taihu Lake is river inflows. Effective pollution load reduction scenarios need to be implemented in these rivers in order to improve the water quality of Taihu Lake. It is important to select appropriate pollution load reduction scenarios for achieving particular goals. The aim of this study was to facilitate the selection of appropriate scenarios. The QUAL2K model for river water quality was used to simulate the effects of a range of pollution load reduction scenarios in the Wujin River, which is one of the major inflow rivers of Taihu Lake. The model was calibrated for the year 2010 and validated for the year 2011. Various pollution load reduction scenarios were assessed using an analytic hierarchy process, and increasing rates of evaluation indicators were predicted using the Delphi method. The results showed that control of pollution from the source is the optimal method for pollution prevention and control, and the method of "Treatment after Pollution" has bad environmental, social and ecological effects. The method applied in this study can assist for environmental managers to select suitable pollution load reduction scenarios for achieving various objectives.

Simulation and Evaluation of Pollution Load Reduction Scenarios for Water Environmental Management: A Case Study of Inflow River of Taihu Lake, China

PubMed Central

Zhang, Ruibin; Qian, Xin; Zhu, Wenting; Gao, Hailong; Hu, Wei; Wang, Jinhua

2014-01-01

In the beginning of the 21st century, the deterioration of water quality in Taihu Lake, China, has caused widespread concern. The primary source of pollution in Taihu Lake is river inflows. Effective pollution load reduction scenarios need to be implemented in these rivers in order to improve the water quality of Taihu Lake. It is important to select appropriate pollution load reduction scenarios for achieving particular goals. The aim of this study was to facilitate the selection of appropriate scenarios. The QUAL2K model for river water quality was used to simulate the effects of a range of pollution load reduction scenarios in the Wujin River, which is one of the major inflow rivers of Taihu Lake. The model was calibrated for the year 2010 and validated for the year 2011. Various pollution load reduction scenarios were assessed using an analytic hierarchy process, and increasing rates of evaluation indicators were predicted using the Delphi method. The results showed that control of pollution from the source is the optimal method for pollution prevention and control, and the method of “Treatment after Pollution” has bad environmental, social and ecological effects. The method applied in this study can assist for environmental managers to select suitable pollution load reduction scenarios for achieving various objectives. PMID:25207492

Patient Information Websites About Medically Induced Second-Trimester Abortions: A Descriptive Study of Quality, Suitability, and Issues.

PubMed

Carlsson, Tommy; Axelsson, Ove

2017-01-10

Patients undergoing medically induced second-trimester abortions feel insufficiently informed and use the Web for supplemental information. However, it is still unclear how people who have experience with pregnancy termination appraise the quality of patient information websites about medically induced second-trimester abortions, whether they consider the websites suitable for patients, and what issues they experience with the websites. Our objective was to investigate the quality of, suitability of, and issues with patient information websites about medically induced second-trimester abortions and potential differences between websites affiliated with the health care system and private organizations. We set out to answer the objective by using 4 laypeople who had experience with pregnancy termination as quality assessors. The first 50 hits of 26 systematic searches were screened (N=1300 hits) using search terms reported by the assessors. Of these hits, 48% (628/1300) were irrelevant and 51% (667/1300) led to websites about medically induced second-trimester abortions. After correcting for duplicate hits, 42 patient information websites were included, 18 of which were affiliated with the health care system and 24 with private organizations. The 4 assessors systematically assessed the websites with the DISCERN instrument (total score range 16-80), the Ensuring Quality Information for Patients (EQIP) tool (total score range 0-100), as well as questions concerning website suitability and perceived issues. The interrater reliability was 0.8 for DISCERN and EQIP, indicating substantial agreement between the assessors. The total mean score was 36 for DISCERN and 40 for EQIP, indicating poor overall quality. Websites from the health care system had greater total EQIP (45 vs 37, P>.05) and reliability scores (22 vs 20, P>.05). Only 1 website was recommended by all assessors and 57% (24/42) were rated as very unsuitable by at least one assessor. The most reported issues with the websites involved lack of information (76%, 32/42), and poor design (36%, 15/42). The high number of irrelevant hits and poor quality of patient information websites are considerable issues that must be addressed and considered when consulting patients awaiting medically induced second-trimester abortions. In clinical encounters, health professionals should initiate discussions concerning websites about medically induced second-trimester abortions and inform patients about the issues and quality deficits associated with these websites. ©Tommy Carlsson, Ove Axelsson. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 10.01.2017.

The Effect of Latent Binary Variables on the Uncertainty of the Prediction of a Dichotomous Outcome Using Logistic Regression Based Propensity Score Matching.

PubMed

Szekér, Szabolcs; Vathy-Fogarassy, Ágnes

2018-01-01

Logistic regression based propensity score matching is a widely used method in case-control studies to select the individuals of the control group. This method creates a suitable control group if all factors affecting the output variable are known. However, if relevant latent variables exist as well, which are not taken into account during the calculations, the quality of the control group is uncertain. In this paper, we present a statistics-based research in which we try to determine the relationship between the accuracy of the logistic regression model and the uncertainty of the dependent variable of the control group defined by propensity score matching. Our analyses show that there is a linear correlation between the fit of the logistic regression model and the uncertainty of the output variable. In certain cases, a latent binary explanatory variable can result in a relative error of up to 70% in the prediction of the outcome variable. The observed phenomenon calls the attention of analysts to an important point, which must be taken into account when deducting conclusions.

The development of a tool for assessing the quality of closed circuit camera footage for use in forensic gait analysis.

PubMed

Birch, Ivan; Vernon, Wesley; Walker, Jeremy; Saxelby, Jai

2013-10-01

Gait analysis from closed circuit camera footage is now commonly used as evidence in criminal trials. The biomechanical analysis of human gait is a well established science in both clinical and laboratory settings. However, closed circuit camera footage is rarely of the quality of that taken in the more controlled clinical and laboratory environments. The less than ideal quality of much of this footage for use in gait analysis is associated with a range of issues, the combination of which can often render the footage unsuitable for use in gait analysis. The aim of this piece of work was to develop a tool for assessing the suitability of closed circuit camera footage for the purpose of forensic gait analysis. A Delphi technique was employed with a small sample of expert forensic gait analysis practitioners, to identify key quality elements of CCTV footage used in legal proceedings. Five elements of the footage were identified and then subdivided into 15 contributing sub-elements, each of which was scored using a 5-point Likert scale. A Microsoft Excel worksheet was developed to calculate automatically an overall score from the fifteen sub-element scores. Five expert witnesses experienced in using CCTV footage for gait analysis then trialled the prototype tool on current case footage. A repeatability study was also undertaken using standardized CCTV footage. The results showed the tool to be a simple and repeatable means of assessing the suitability of closed circuit camera footage for use in forensic gait analysis. The inappropriate use of poor quality footage could lead to challenges to the practice of forensic gait analysis. All parties involved in criminal proceedings must therefore understand the fitness for purpose of any footage used. The development of this tool could offer a method of achieving this goal, and help to assure the continued role of forensic gait analysis as an aid to the identification process. Copyright © 2013 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Quality of the written radiology report: a review of the literature.

PubMed

Pool, Felicity; Goergen, Stacy

2010-08-01

A literature review was carried out, guided by the question, What are the important elements of a high-quality radiology written report? Two papers known to the authors were used as a basis for 5 PubMed search strategies. Exclusion criteria were applied to retrieved citations. Reference lists of retrieved citations were scanned for additional relevant papers and exclusion criteria applied to these. Web sites of professional radiology organizations were scanned for guidelines relating to the written radiology report. Retrieved guidelines were appraised using the Appraisal of Guidelines for Research & Evaluation instrument. Methodologies of retrieved papers were not suitable for conventional appraisal, and an evidence table was constructed. The search strategy identified 25 published papers and 4 guidelines. Published study methodologies included 1 randomized controlled trial; 1 before-and-after study of interventions; 10 observational studies, audits, or analyses; 12 surveys; and 1 narrative review of the literature. Existing guidelines have a number of weaknesses with regard to scope and purpose, methods of development, stakeholder consultation, and editorial independence and applicability. There is a major gap in published studies relating to testing of interventions to improve report quality using conventional randomized controlled trial methods. Published studies and guidelines generally support report content, including clinical history, examination quality, description of findings, comparison, and diagnosis. Important report attributes include accuracy, clarity, and certainty. There is wide variation in the language used to describe imaging findings and diagnostic certainty. Survey participants strongly preferred reports with structured or itemized formats, but few studies exist regarding the effect of report structure on quality. Copyright 2010 American College of Radiology. Published by Elsevier Inc. All rights reserved.

The Global Streamflow Indices and Metadata Archive (GSIM) - Part 2: Quality control, time-series indices and homogeneity assessment

NASA Astrophysics Data System (ADS)

Gudmundsson, Lukas; Do, Hong Xuan; Leonard, Michael; Westra, Seth

2018-04-01

This is Part 2 of a two-paper series presenting the Global Streamflow Indices and Metadata Archive (GSIM), which is a collection of daily streamflow observations at more than 30 000 stations around the world. While Part 1 (Do et al., 2018a) describes the data collection process as well as the generation of auxiliary catchment data (e.g. catchment boundary, land cover, mean climate), Part 2 introduces a set of quality controlled time-series indices representing (i) the water balance, (ii) the seasonal cycle, (iii) low flows and (iv) floods. To this end we first consider the quality of individual daily records using a combination of quality flags from data providers and automated screening methods. Subsequently, streamflow time-series indices are computed for yearly, seasonal and monthly resolution. The paper provides a generalized assessment of the homogeneity of all generated streamflow time-series indices, which can be used to select time series that are suitable for a specific task. The newly generated global set of streamflow time-series indices is made freely available with an digital object identifier at https://doi.pangaea.de/10.1594/PANGAEA.887470 and is expected to foster global freshwater research, by acting as a ground truth for model validation or as a basis for assessing the role of human impacts on the terrestrial water cycle. It is hoped that a renewed interest in streamflow data at the global scale will foster efforts in the systematic assessment of data quality and provide momentum to overcome administrative barriers that lead to inconsistencies in global collections of relevant hydrological observations.

[Selecting methods of controls concentration for internal quality control and continuity of control chart between different reagent lots for HBsAg qualitative detection].

PubMed

Li, Jin-ming; Zheng, Huai-jing; Wang, Lu-nan; Deng, Wei

2003-04-01

To establish a model for one choosing controls with a suitable concentration for internal quality control (IQC) with qualitative ELISA detection, and a consecutive plotting method on Levey-Jennings control chart when reagent kit lot is changed. First, a series of control serum with 0.2, 0.5, 1.0, 2.0 and 5.0ng/ml HBsAg respectively were assessed for within-run and between-run precision according to NCCLs EP5 document. Then, a linear regression equation (y=bx + a) with best correlation coefficient (r > 0.99) was established based on S/CO values of the series of control serum. Finally, one could choose controls with S/CO value calculated from the equation (y = bx + a) minus the product of the S/CO value multiplying three-fold between-run CV to be still more than 1.0 for IQC use. For consecutive plotting on Levey-Jennings control chart when ELISA kit lot was changed, the new lot kits were used to detect the same series of HBsAg control serum as above. Then, a new linear regression equation (y2 = b2x2 + a2) with best correlation coefficient was obtained. The old one (y1 =b1x1 + a1) could be obtained based on the mean values from above precision assessment. The S/CO value of a control serum detected by new lot kit could be changed to that detected by old kit lot based on the factor of y2/y1. Therefore, the plotting on primary Levey-Jennings control chart could be continued. The within-run coefficient of variation CV of the ELISA method for control serum with 0.2, 0.5, 1.0, 2.0 and 5.0ng/ml HBsAg were 11.08%, 9.49%, 9.83%, 9.18% and 7.25%, respectively, and between-run CV were 13.25%, 14.03%, 15.11%, 13.29% and 9.92%. The linear regression equation with best correlation coefficient from a test at random was y = 3.509x + 0.180. The suitable concentration of control serum for IQC could be 0.5ng/ml or 1.0ng/ml. The linear regression equation from the old lot and other two new lots of the ELISA kits were y1 = 3.550(x1) + 0.226, y2 = 3.238(x2) +0.388, and y3 =3.428(x3) + 0.148, respectively. Then, the transferring factors of 0.960 (y2/y1) and 0.908 (y3/y1) were obtained. The results shows that the model established for IQC control serum concentration selecting and for consecutive plotting on control chart when the reagent lot is changed is effective and practical.

Quality control of Kato slide counts for Schistosoma mansoni: a review of 12 years' experience in Kenya.

PubMed Central

Sturrock, R. F.; Ouma, J. H.; Kariuki, H. C.; Thiongo, F. W.; Koech, D. K.; Butterworth, A. E.

1997-01-01

A total of 19 annual or biannual audits were performed over a 12-year period by an independent microscopist on randomized subsamples of Kato slides examined for Schistosoma mansoni eggs by Kenyan microscopists from the Division of Vector-borne Diseases (DVBD). The recounts were invariably lower than the originals owing to some deterioration of the preparations between counts, but the two were strongly correlated: significant regressions of recounts on counts taking up 80-90% of the observed variance. Observer bias differed significantly between microscopists but remained stable over time, whereas repeatability of recounts on counts dropped slightly in periods of maximum work load but did not vary systematically with time. Approximately 7% of the counts and recounts disagreed on the presence or absence of eggs, but less than a third of these were negatives that were found positive on recount. False negatives dropped to 1.3% if duplicate counts were considered. The performance of the Kenyan microscopists was remarkably high and consistent throughout the 12-year period. This form of quality control is suitable for projects where limited funds preclude full-time supervisors using more sophisticated systems. PMID:9447781

Systematic review on strength training in Parkinson’s disease: an unsolved question

PubMed Central

Ramazzina, Ileana; Bernazzoli, Benedetta; Costantino, Cosimo

2017-01-01

The purpose of this study was to investigate the effectiveness of strength training, performed against a different resistance from body weight, in improving motor and nonmotor symptoms in patients with Parkinson’s disease (PD). The following electronic databases were searched: PubMed, Physiotherapy Evidence Database, Cochrane Central Register of Controlled Trials, Scopus, and Web of Science. The review was conducted and reported in accordance with the PRISMA statement. Thirteen high-quality randomized controlled trials were included. Strength training performed against external resistance is well tolerated and appears to be a suitable physical activity to improve both physical parameters and quality of life parameters of PD subjects. However, although the study intervention included strength training, only a few selected studies assessed the improvement of muscle strength. Despite the encouraging results, it is difficult to establish a correlation between strength training and the improvements made. Our review highlights the lack of common intent in terms of study design and the presence of different primary and secondary outcomes. Accordingly, further studies are needed to support the beneficial effects of different types of strength training in PD subjects and to underline the superiority of strength training in PD patients with respect to other training. PMID:28408811

Direct analysis in real time mass spectrometry and multivariate data analysis: a novel approach to rapid identification of analytical markers for quality control of traditional Chinese medicine preparation.

PubMed

Zeng, Shanshan; Wang, Lu; Chen, Teng; Wang, Yuefei; Mo, Huanbiao; Qu, Haibin

2012-07-06

The paper presents a novel strategy to identify analytical markers of traditional Chinese medicine preparation (TCMP) rapidly via direct analysis in real time mass spectrometry (DART-MS). A commonly used TCMP, Danshen injection, was employed as a model. The optimal analysis conditions were achieved by measuring the contribution of various experimental parameters to the mass spectra. Salvianolic acids and saccharides were simultaneously determined within a single 1-min DART-MS run. Furthermore, spectra of Danshen injections supplied by five manufacturers were processed with principal component analysis (PCA). Obvious clustering was observed in the PCA score plot, and candidate markers were recognized from the contribution plots of PCA. The suitability of potential markers was then confirmed by contrasting with the results of traditional analysis methods. Using this strategy, fructose, glucose, sucrose, protocatechuic aldehyde and salvianolic acid A were rapidly identified as the markers of Danshen injections. The combination of DART-MS with PCA provides a reliable approach to the identification of analytical markers for quality control of TCMP. Copyright © 2012 Elsevier B.V. All rights reserved.

Protein Crystal Movements and Fluid Flows During Microgravity Growth

NASA Technical Reports Server (NTRS)

Boggon, Titus J.; Chayen, Naomi E.; Snell, Edward H.; Dong, Jun; Lautenschlager, Peter; Potthast, Lothar; Siddons, D. Peter; Stojanoff, Vivian; Gordon, Elspeth; Thompson, Andrew W.;

Statistical Evaluation of Combined Daily Gauge Observations and Rainfall Satellite Estimations over Continental South America

NASA Technical Reports Server (NTRS)

Vila, Daniel; deGoncalves, Luis Gustavo; Toll, David L.; Rozante, Jose Roberto

2008-01-01

This paper describes a comprehensive assessment of a new high-resolution, high-quality gauge-satellite based analysis of daily precipitation over continental South America during 2004. This methodology is based on a combination of additive and multiplicative bias correction schemes in order to get the lowest bias when compared with the observed values. Inter-comparisons and cross-validations tests have been carried out for the control algorithm (TMPA real-time algorithm) and different merging schemes: additive bias correction (ADD), ratio bias correction (RAT) and TMPA research version, for different months belonging to different seasons and for different network densities. All compared merging schemes produce better results than the control algorithm, but when finer temporal (daily) and spatial scale (regional networks) gauge datasets is included in the analysis, the improvement is remarkable. The Combined Scheme (CoSch) presents consistently the best performance among the five techniques. This is also true when a degraded daily gauge network is used instead of full dataset. This technique appears a suitable tool to produce real-time, high-resolution, high-quality gauge-satellite based analyses of daily precipitation over land in regional domains.

Catchment-Scale Terrain Modelling with Structure-from-Motion Photogrammetry: a replacement for airborne lidar?

NASA Astrophysics Data System (ADS)

Brasington, James; James, Joe; Cook, Simon; Cox, Simon; Lotsari, Eliisa; McColl, Sam; Lehane, Niall; Williams, Richard; Vericat, Damia

2016-04-01

In recent years, 3D terrain reconstructions based on Structure-from-Motion photogrammetry have dramatically democratized the availability of high quality topographic data. This approach involves the use of a non-linear bundle adjustment to estimate simultaneously camera position, pose, distortion and 3D model coordinates. In contrast to traditional aerial photogrammetry, the bundle adjustment is typically solved without external constraints and instead ground control is used a posteriori to transform the modelled coordinates to an established datum using a similarity transformation. The limited data requirements, coupled with the ability to self-calibrate compact cameras, has led to a burgeoning of applications using low-cost imagery acquired terrestrially or from low-altitude platforms. To date, most applications have focused on relatively small spatial scales (0.1-5 Ha), where relaxed logistics permit the use of dense ground control networks and high resolution, close-range photography. It is less clear whether this low-cost approach can be successfully upscaled to tackle larger, watershed-scale projects extending over 102-3 km2 where it could offer a competitive alternative to established landscape modelling with airborne lidar. At such scales, compromises over the density of ground control, the speed and height of sensor platform and related image properties are inevitable. In this presentation we provide a systematic assessment of the quality of large-scale SfM terrain products derived for over 80 km2 of the braided Dart River and its catchment in the Southern Alps of NZ. Reference data in the form of airborne and terrestrial lidar are used to quantify the quality of 3D reconstructions derived from helicopter photography and used to establish baseline uncertainty models for geomorphic change detection. Results indicate that camera network design is a key determinant of model quality, and that standard aerial photogrammetric networks based on strips of nadir photography can lead to unstable camera calibration and systematic errors that are difficult to model with sparse ground control. We demonstrate how a low cost multi-camera platform providing both nadir and oblique imagery can support robust camera calibration, enabling the generation of high quality, large-scale terrain products that are suitable for precision fluvial change detection.

Seasonal Variation of Groundwater Quality in Erode District, Tamil Nadu, India.

PubMed

Kavidha, R; Elangovan, K

2014-07-01

In recent years, the recurring environmental issues regarding hazardous waste, global climate change, stratospheric ozone depletion, groundwater contamination, disaster mitigation and removal of pollutant have become the focus of environmental attention. In the management of water resources, quality of water is just as important as its quantity. In order to assess the quality and/or suitability of groundwater for drinking and irrigation in Erode District, 144 water samples each in post-monsoon and pre-monsoon during the year 2007 were collected and analyzed for various parameters. These parameters were compared with IS: 10500-1991 drinking water standards. Out of 144 samples, 29 samples exceeded the permissible limit for both the monsoons, 71 samples were within the permissible limit for both the monsoons and the remaining samples exceeded the permissible limit for any one of the monsoon. During both monsoons, except some samples, most of the samples were suitable for drinking and irrigation.

Chemical and biotechnological processing of collagen-containing raw materials into functional components of feed suitable for production of high-quality meat from farm animals

NASA Astrophysics Data System (ADS)

Baburina, M. I.; Ivankin, A. N.; Stanovova, I. A.

2017-09-01

The process of chemical biotechnological processing of collagen-containing raw materials into functional components of feeds for effective pig rearing was studied. Protein components of feeds were obtained as a result of hydrolysis in the presence of lactic acid of the animal collagen from secondary raw materials, which comprised subcutaneous collagen (cuticle), skin and veined mass with tendons from cattle. For comparison, a method is described for preparing protein components of feeds by cultivating Lactobacillus plantarum. Analysis of the kinetic data of the conversion of a high-molecular collagen protein to an aminolyte polypeptide mixture showed the advantage of microbiological synthesis in obtaining a protein for feeds. Feed formulations have been developed to include the components obtained, and which result in high quality pork suitable for the production of quality meat products.

Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus.

PubMed

Laarhoven, Bob; Elissen, H J H; Temmink, H; Buisman, C J N

2016-01-01

An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates.

Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus

PubMed Central

Laarhoven, Bob; Elissen, H. J. H.; Temmink, H.; Buisman, C. J. N.

2016-01-01

An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml), 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin). With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates. PMID:26937632

Comparison of human platelet lysate alternatives using expired and freshly isolated platelet concentrates for adipose-derived stromal cell expansion.

PubMed

Dessels, Carla; Durandt, Chrisna; Pepper, Michael S

2018-03-19

Pooled human platelet lysate (pHPL) has been used to expand adipose-derived stromal cells (ASCs) and can be formulated using fresh or expired buffy coats (BCs) which are then resuspended in either plasma or an additive solution. Not much is known about the effects that expired products and additive solutions have on ASC expansion, and the need for quality control and release criteria has been expressed. This pilot study compared proliferation, cell size, morphology and immunophenotype of ASCs expanded in the different pHPL alternatives versus foetal bovine serum (FBS). Quality control criteria were assessed prior to and during the manufacture of the pHPL alternatives. ASCs were then expanded in 1%, 2.5%, 5% or 10% of the different pHPL alternatives or in 10% FBS. Cell size, morphology, cell number and immunophenotype were measured using microscopy and flow cytometry. The majority of the pHPL alternatives were within the recommended ranges for the quality control criteria. ASCs expanded in the pHPL alternatives were smaller in size, displayed a tighter spindle-shaped morphology, increased cell growth and had a similar immunophenotype (with the exception of CD34 and CD36) when compared to ASCs expanded in FBS. Here we report on the effects that expired BC products and additive solutions have on ASC expansion. When taken together, our findings indicate that all of the pHPL alternatives can be considered to be suitable replacements for FBS for ASC expansion, and that expired BC products can be used as an alternative to fresh BC products.

Tracing and control of raw materials sourcing for vaccine manufacturers.

PubMed

Faretra Peysson, Laurence

2010-05-01

The control of the raw materials used to manufacture vaccines is mandatory; therefore, a very clear process must be in place to guarantee that raw materials are traced. Those who make products or supplies used in vaccine manufacture (suppliers of culture media, diagnostic tests, etc.) must apply quality systems proving that they adhere to certain standards. ISO certification, Good Manufacturing Practices for production sites and the registration of culture media with a 'Certificate of Suitability' from the European Directorate for the Quality of Medicines and Healthcare are reliable quality systems pertaining to vaccine production. Suppliers must assure that each lot of raw materials used in a product that will be used in vaccine manufacture adheres to the level of safety and traceability required. Incoming materials must be controlled in a single 'Enterprise Resource Planning' system which is used to document important information, such as the assignment of lot number, expiration date, etc. Ingredients for culture media in particular must conform to certain specifications. The specifications that need to be checked vary according to the ingredient, based on the level of risk. The way a raw material is produced is also important, and any aspect relative to cross-contamination, such as the sanitary measures used in producing and storing the raw material must be checked as well. In addition, suppliers can reduce the risk of viral contamination of raw materials by avoiding purchases in countries where a relevant outbreak is currently declared. 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

Impact of Quality Management Systems on Teaching-Learning Processes

ERIC Educational Resources Information Center

Cruz, Francisco José Fernández; Gálvez, Inmaculada Egido; Santaolalla, Rafael Carballo

2016-01-01

Purpose: Quality management systems are being used more frequently in educational institutions, although their application has generated a certain amount of disagreement among education experts, who have at times questioned their suitability and usefulness for improving schools. The purpose of this paper is to contribute to this discussion by…

Extending the Community Multiscale Air Quality (CMAQ) Modeling System to Hemispheric Scales: Overview of Process Considerations and Initial Applications

EPA Science Inventory

The Community Multiscale Air Quality (CMAQ) modeling system is extended to simulate ozone, particulate matter, and related precursor distributions throughout the Northern Hemisphere. Modeled processes were examined and enhanced to suitably represent the extended space and timesca...

Temperature Alters the Response to Insecticides in Drosophila suzukii (Diptera: Drosophilidae).

PubMed

Saeed, Nadia; Tonina, Lorenzo; Battisti, Andrea; Mori, Nicola

2018-05-28

Drosophila suzukii Matsumura (Diptera: Drosophilidae) is an invasive pest in Europe and is a major threat to the soft fruit industry. Because of an ample temperature range, the pest spans from low to high elevation crops in mountain areas of the Southern Alps. Starting from field observations on the variable efficacy of insecticides under different temperatures, experiments were designed to test the efficacy of chemical families of insecticides available against this pest. Pyrethroids and spynosins proved to be the most effective under all temperature conditions (14, 22, and 30°C) in all assays. Organophosphates and neonicotinoids showed significantly lower efficacy at low temperatures, indicating that they are not suitable to protect crops under those conditions. The management of the pest in cold habitats, which are suitable for the cultivation of high-quality berries as for example in mountain farming systems, is constrained by a limited number of molecules available for fruit protection. Temperature has to be considered among factors affecting the decision-making process for the choice of registered formulations to be used in pest control.

Habitat Suitability Index Models: Black-shouldered kite

USGS Publications Warehouse

Faanes, Craig A.; Howard, Rebecca J.

1987-01-01

A review and synthesis of existing information were used to develop a model for evaluating black-shouldered kite habitat quality. The model is scaled to produce an index between 0 (unsuitable habitat) to 1.0 (optimal habitat). Habitat suitability index models are designed for use with the Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service. Guidelines for model application are provided.

Multiscale habitat suitability index models for priority landbirds in the Central Hardwoods and West Gulf Coastal Plain/Ouachitas Bird Conservation Regions

Treesearch

John M. Tirpak; D. Todd Jones-Farrand; Frank R., III Thompson; Daniel J. Twedt; William B., III Uihlein

2009-01-01

Habitat Suitability Index (HSI) models were developed to assess habitat quality for 40 priority bird species in the Central Hardwoods and West Gulf Coastal Plain/Ouachitas Bird Conservation Regions. The models incorporated both site and landscape environmental variables from one of six nationally consistent datasets. Potential habitat was first defined from unique...

Tools for monitoring system suitability in LC MS/MS centric proteomic experiments.

PubMed

Bereman, Michael S

2015-03-01

With advances in liquid chromatography coupled to tandem mass spectrometry technologies combined with the continued goals of biomarker discovery, clinical applications of established biomarkers, and integrating large multiomic datasets (i.e. "big data"), there remains an urgent need for robust tools to assess instrument performance (i.e. system suitability) in proteomic workflows. To this end, several freely available tools have been introduced that monitor a number of peptide identification (ID) and/or peptide ID free metrics. Peptide ID metrics include numbers of proteins, peptides, or peptide spectral matches identified from a complex mixture. Peptide ID free metrics include retention time reproducibility, full width half maximum, ion injection times, and integrated peptide intensities. The main driving force in the development of these tools is to monitor both intra- and interexperiment performance variability and to identify sources of variation. The purpose of this review is to summarize and evaluate these tools based on versatility, automation, vendor neutrality, metrics monitored, and visualization capabilities. In addition, the implementation of a robust system suitability workflow is discussed in terms of metrics, type of standard, and frequency of evaluation along with the obstacles to overcome prior to incorporating a more proactive approach to overall quality control in liquid chromatography coupled to tandem mass spectrometry based proteomic workflows. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaulation of the Quality of an Aquatic Habitat on the Drietomica River

NASA Astrophysics Data System (ADS)

Stankoci, Ivan; Jariabková, Jana; Macura, Viliam

2014-03-01

The ecological status of a river is influenced by many factors, of which the most important are fauna and flora; in this paper they are defined as a habitat. During the years 2004, 2005, 2006 and 2011, research on the hydroecological quality of a habitat was evaluated in the reference section of the Drietomica River. Drietomica is a typical representative river of the Slovak flysch area and is located in the region of the White Carpathians in the northwestern part of Slovakia. In this article the results of modeling a microhabitat by means of the Instream Flow Incremental Methodology (IFIM) are presented. For the one-dimensional modeling, the River Habitat Simulation System (RHABSIM) was used to analyse the interaction between a water flow, the morphology of a riverbed, and the biological components of the environment. The habitat ´s hydroecological quality was evaluated after detailed ichthyological, topographical and hydro-morphological surveys. The main step was assessing the biotic characteristics of the habitat through the suitability curves for the Brown trout (Salmo trutta m. fario). Suitability curves are a graphic representation of the main biotic and abiotic preferences of a microhabitat's components. The suitability curves were derived for the depth, velocity, fish covers and degree of the shading. For evaluating the quality of the aquatic habitat, 19 fish covers were closely monitored and evaluated. The results of the Weighted Usable Area (WUA = f (Q)) were evaluated from a comprehensive assessment of the referenced reach of the Drietomica River.

Persistent-current magnetizations of Nb3Sn Rutherford cables and extracted strands

NASA Astrophysics Data System (ADS)

Collings, E. W.; Sumption, M. D.; Myers, C. S.; Wang, X.; Dietderich, D. R.; Yagotyntsev, K.; Nijhuis, A.

2017-12-01

The magnetizations of eight high-gradient quadrupole cables designated HQ and QXF and a pair of strands, identical in architecture but with different effective strand diameters extracted from an HQ and a related QXF cable, were measured. In the service of field quality assessment, the cable magnetizations and losses were measured by pickup coil magnetometry at 4.2 K in face-on fields, B m , of ± 400 mT at frequencies, f, of up to 60 mHz. Based on the coupling component of loss, Q coup , the coupling magnetization M coup = Q coup /4B m was derived for a ramp rate of 7.5 mT/s. Persistent current (shielding) magnetization and loss (M sh and Q h,strand ) were measured on short pieces of extracted strand by vibrating sample magnetometry at 4.2 K. Unpenetrated M-B loops to ± 400 mT and fully penetrated loops to ± 14 T were obtained. M coup can be easily controlled and reduced to relatively small values by introducing cores and adjusting the preparation conditions. But in low fields near injection Nb3Sn’s high J c and correspondingly high M sh,cable may call for magnetic compensation to preserve field quality. The suitably adjusted cable and strand fully penetrated M-B loops were in reasonable accord leading to the conclusion that strand magnetization is a useful measure of cable magnetization, and that when suitably manipulated can provide input to magnet field error calculations.

Concise review: stem cell-derived erythrocytes as upcoming players in blood transfusion.

PubMed

Zeuner, Ann; Martelli, Fabrizio; Vaglio, Stefania; Federici, Giulia; Whitsett, Carolyn; Migliaccio, Anna Rita

2012-08-01

Blood transfusions have become indispensable to treat the anemia associated with a variety of medical conditions ranging from genetic disorders and cancer to extensive surgical procedures. In developed countries, the blood supply is generally adequate. However, the projected decline in blood donor availability due to population ageing and the difficulty in finding rare blood types for alloimmunized patients indicate a need for alternative red blood cell (RBC) transfusion products. Increasing knowledge of processes that govern erythropoiesis has been translated into efficient procedures to produce RBC ex vivo using primary hematopoietic stem cells, embryonic stem cells, or induced pluripotent stem cells. Although in vitro-generated RBCs have recently entered clinical evaluation, several issues related to ex vivo RBC production are still under intense scrutiny: among those are the identification of stem cell sources more suitable for ex vivo RBC generation, the translation of RBC culture methods into clinical grade production processes, and the development of protocols to achieve maximal RBC quality, quantity, and maturation. Data on size, hemoglobin, and blood group antigen expression and phosphoproteomic profiling obtained on erythroid cells expanded ex vivo from a limited number of donors are presented as examples of the type of measurements that should be performed as part of the quality control to assess the suitability of these cells for transfusion. New technologies for ex vivo erythroid cell generation will hopefully provide alternative transfusion products to meet present and future clinical requirements. Copyright © 2012 AlphaMed Press.

Design and Evaluation of a Fully Implantable Control Unit for Blood Pumps

PubMed Central

Unthan, Kristin; Gräf, Felix; Laumen, Marco; Finocchiaro, Thomas; Sommer, Christoph; Lanmüller, Hermann; Steinseifer, Ulrich

2015-01-01

As the number of donor hearts is limited while more and more patients suffer from end stage biventricular heart failure, Total Artificial Hearts become a promising alternative to conventional treatment. While pneumatic devices sufficiently supply the patients with blood flow, the patient's quality of life is limited by the percutaneous pressure lines and the size of the external control unit. This paper describes the development of the control unit of the ReinHeart, a fully implantable Total Artificial Heart. General requirements for any implantable control unit are defined from a technical and medical point of view: necessity of a Transcutaneous Energy Transmission, autonomous operation, safety, geometry, and efficiency. Based on the requirements, a prototype is designed; it incorporates a LiFePo4 battery pack with charger, a rectifier for transcutaneous energy transmission, the motor's driver electronics, and a microcontroller which monitors and controls all functions. In validation tests, the control unit demonstrated a stable operation on TET and battery supply and a safe switching from one supply to the other. The overall mean efficiency is 14% on TET and 22% on battery supply. The control unit is suitable for chronic animal trials of the ReinHeart. PMID:26583095

Control strategies for nitrous oxide emissions reduction on wastewater treatment plants operation.

PubMed

Santín, I; Barbu, M; Pedret, C; Vilanova, R

2017-11-15

The present paper focused on reducing greenhouse gases emissions in wastewater treatment plants operation by application of suitable control strategies. Specifically, the objective is to reduce nitrous oxide emissions during the nitrification process. Incomplete nitrification in the aerobic tanks can lead to an accumulation of nitrite that triggers the nitrous oxide emissions. In order to avoid the peaks of nitrous oxide emissions, this paper proposes a cascade control configuration by manipulating the dissolved oxygen set-points in the aerobic tanks. This control strategy is combined with ammonia cascade control already applied in the literature. This is performed with the objective to take also into account effluent pollutants and operational costs. In addition, other greenhouse gases emissions sources are also evaluated. Results have been obtained by simulation, using a modified version of Benchmark Simulation Model no. 2, which takes into account greenhouse gases emissions. This is called Benchmark Simulation Model no. 2 Gas. The results show that the proposed control strategies are able to reduce by 29.86% of nitrous oxide emissions compared to the default control strategy, while maintaining a satisfactory trade-off between water quality and costs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Automating the application of smart materials for protein crystallization.

PubMed

Khurshid, Sahir; Govada, Lata; El-Sharif, Hazim F; Reddy, Subrayal M; Chayen, Naomi E

2015-03-01

The fabrication and validation of the first semi-liquid nonprotein nucleating agent to be administered automatically to crystallization trials is reported. This research builds upon prior demonstration of the suitability of molecularly imprinted polymers (MIPs; known as `smart materials') for inducing protein crystal growth. Modified MIPs of altered texture suitable for high-throughput trials are demonstrated to improve crystal quality and to increase the probability of success when screening for suitable crystallization conditions. The application of these materials is simple, time-efficient and will provide a potent tool for structural biologists embarking on crystallization trials.

Managed aquifer recharge by a check dam to improve the quality of fluoride-rich groundwater: a case study from southern India.

PubMed

Gowrisankar, G; Jagadeshan, G; Elango, L

2017-04-01

In many regions around the globe, including India, degradation in the quality of groundwater is of great concern. The objective of this investigation is to determine the effect of recharge from a check dam on quality of groundwater in a region of Krishnagiri District of Tamil Nadu State, India. For this study, water samples from 15 wells were periodically obtained and analysed for major ions and fluoride concentrations. The amount of major ions present in groundwater was compared with the drinking water guideline values of the Bureau of Indian Standards. With respect to the sodium and fluoride concentrations, 38% of groundwater samples collected was not suitable for direct use as drinking water. Suitability of water for agricultural use was determined considering the electrical conductivity, sodium adsorption ratio, sodium percentage, permeability index, Wilcox and United States Salinity Laboratory diagrams. The influence of freshwater recharge from the dam is evident as the groundwater in wells nearer to the check dam was suitable for both irrigation and domestic purposes. However, the groundwater away from the dam had a high ionic composition. This study demonstrated that in other fluoride-affected areas, the concentration can be reduced by dilution with the construction of check dams as a measure of managed aquifer recharge.

Water-quality assessment of the Cook Inlet basin, Alaska : summary of data through 1997

USGS Publications Warehouse

Glass, Roy L.

1999-01-01

Among the first activities undertaken in each National Water-Quality Assessment (NAWQA) investigation are the compilation, screening, and statistical summary of available data concerning water-quality conditions in the study unit. The water-quality conditions of interest are those that are representative of the general ambient water quality of a given stream reach or area of an aquifer. This report identifies which existing water-quality data are suitable for characterizing general conditions in a nationally consistent manner and describes, to the extent possible, general water-quality conditions in the Cook Inlet Basin in southcentral Alaska. The study unit consists of all lands that drain into Cook Inlet, but not the marine environment itself. Surface-water-quality data are summarized for 31 sites on streams. Ground-water quality data are summarized for four regions using analyses from about 550 wells that yield water from unconsolidated glacial and alluvial deposits and analyses from 17 wells in western Cook Inlet, some of which may yield water from coal or weakly consolidated sandstone or conglomerate. The summaries focus on the central tendencies and typical variations in the data and use nonparametric statistics such as frequencies and percentile values. Few surface- and ground-water sites have long-term water-quality records and very few data are available for dissolved oxygen, nutrients, metals, trace elements, organic compounds, and radionuclides. In general, most waters in streams and wells have small concentrations of major inorganic constituents, nutrients, trace elements, and organic compounds. Most streams have water that is generally suitable for drinking-water supply, the growth and propagation of cold-water anadromous fish, and water-contact recreation. However, suspended-sediment concentrations in glacier-fed streams are naturally high and can make water from glacier-fed streams unsuitable for many uses unless the water is treated to remove the suspended sediment. Several streams and lakes in Anchorage have fecal coliform bacteria concentrations higher than allowed for drinking or water-contact recreation. Ground water in the major withdrawal regions is generally suitable for drinking and most other purposes, but some wells yield water having nitrate, iron, or arsenic concentrations higher than drinking-water criteria. Ground-water quality has been degraded in several areas as the result of leaks or spills of petroleum products.

QUALITY OF LIFE IN PATIENTS WITH GRAVES OPHTHALMOPATHY

PubMed Central

Yeatts, R. Patrick

2005-01-01

Purpose To assess the quality of life in patients with Graves ophthalmopathy by means of a prospective questionnaire with validation. Methods A questionnaire containing 105 items was sent to 325 patients seen in our university-based oculoplastic clinic. Two hundred three questionnaires were returned and were suitable for analysis. Fifty-three consecutive patients with Graves disease who presented to the clinic for examination also completed the questionnaire. The questionnaire was validated by administering it to 33 healthy subjects who had no history of Graves disease or thyroid disorder. The results were compared with those of normal subjects and with national norms for visually impaired populations. The relationship of individual questionnaire items to measures of clinical severity was subsequently assessed. Results Patients with Graves ophthalmopathy report greater impairment in both physical (44.4 versus 51.9; P < .001) and mental (43.8 versus 51.8; P < .001) health; poorer self- image (P < .001); and significantly more disturbance in their sleep, social function, and work function (P < .001) than controls. Afflicted patients also experience significantly more diplopia, blurred vision, and dry eye symptoms than controls (P < .001). Individual questionnaire items were found to correlate with clinical disease severity scores and were used to establish a Graves ophthalmopathy quality-of-life questionnaire with disease severity validation. Conclusions Patients with Graves disease are significantly impaired in their social and vocational function because of the ophthalmic manifestations of the disease. A short questionnaire that correlates with clinical measures of disease severity may be a useful measure of quality of life in this disease. PMID:17057811

[Effects of the additives and the combination of plants on Pb absorption, growth and quality of Dianthus superbus].

PubMed

Yang, Xiao Yu; Li, Cheng; Ma, Si Yue; Li, Jian Heng

2017-04-18

A pot experiment was conducted to study the effects of inoculation with arbuscular mycorrhizal (AM) fungi, neighboring plants (Trifolium repens), addition of EDTA and phosphate fertilizer on the performance of Dianthus superbus grown on Pb contaminated soil. The growth and quality of D. superbus were investigated to provide a theoretical basis for the scientific cultivation of Chinese herbal medicine. The results showed that the D. superbus with AM resulted in a significant inhibition of Pb uptake (P＜0.05), increase of root development and root/shoot ratio compared to untreated control plants, and with the highest content of active component. The content of emodin reached 6.5 mg·g -1 . When planting with T. repens the reducing effect of Pb absorption induced by AM fungi was insignificant. The quality of D. superbus decreased, and the emodin content decreased to 3.2 mg·g -1 , which was lower than that in the control group. However, D. superbus showed improved growth and active ingredients, and the lowest Pb content (1.3 mg·g -1 ) due to AM fungal inoculation. The addition of EDTA decreased the growth of D. superbus, but promoted the absorption of Pb, with the Pb content to 340.0 mg·g -1 . Calcium phosphate showed the ability to immobilize other heavy metals in the soil, therefore might be more suitable to be applied in the conditions of compound pollution. Considering all of the results, AM fungi play a positive role in protecting the safety and quality of Chinese herbal medicine.

Rectal swab screening assays of public health importance in molecular diagnostics: Sample adequacy control.

PubMed

Glisovic, Sanja; Eintracht, Shaun; Longtin, Yves; Oughton, Matthew; Brukner, Ivan

Rectal swabs are routinely used by public health authorities to screen for multi-drug resistant enteric bacteria including vancomycin-resistant enterococci (VRE) and carbapenem-resistant enterobacteriaceae (CRE). Screening sensitivity can be influenced by the quality of the swabbing, whether performed by the patient (self-swabbing) or a healthcare practitioner. One common exclusion criterion for rectal swabs is absence of "visible soiling" from fecal matter. In our institution, this criterion excludes almost 10% of rectal swabs received in the microbiology laboratory. Furthermore, over 30% of patients in whom rectal swabs are cancelled will not be re-screened within the next 48h, resulting in delays in removing infection prevention measures. We describe two quantitative polymerase chain reaction (qPCR)-based assays, human RNAse P and eubacterial 16S rDNA, which might serve as suitable controls for sampling adequacy. However, lower amounts of amplifiable human DNA make the 16s rDNA assay a better candidate for sample adequacy control. Copyright © 2017. Published by Elsevier Ltd.

Empowerment: a conceptual discussion.

PubMed

Tengland, Per-Anders

2008-06-01

The concept of 'empowerment' is used frequently in a number of professional areas, from psychotherapy to social work. But even if the same term is used, it is not always clear if the concept denotes the same goals or the same practice in these various fields. The purpose of this paper is to clarify the discussion and to find a plausible and useful definition of the concept that is suitable for work in various professions. Several suggestions are discussed in the paper, for example control over life or health, autonomy, ability, self-efficacy, self-esteem, and freedom, and it is concluded that there are two plausible complementary uses, one as a goal and one as a process or approach. Empowerment as a goal is to have control over the determinants of one's quality of life, and empowerment as a process is to create a professional relation where the client or community takes control over the change process, determining both the goals of this process and the means to use.

Electronically Tunable Differential Integrator: Linear Voltage Controlled Quadrature Oscillator.

PubMed

Nandi, Rabindranath; Pattanayak, Sandhya; Venkateswaran, Palaniandavar; Das, Sagarika

2015-01-01

A new electronically tunable differential integrator (ETDI) and its extension to voltage controlled quadrature oscillator (VCQO) design with linear tuning law are proposed; the active building block is a composite current feedback amplifier with recent multiplication mode current conveyor (MMCC) element. Recently utilization of two different kinds of active devices to form a composite building block is being considered since it yields a superior functional element suitable for improved quality circuit design. The integrator time constant (τ) and the oscillation frequency (ω o ) are tunable by the control voltage (V) of the MMCC block. Analysis indicates negligible phase error (θ e ) for the integrator and low active ω o -sensitivity relative to the device parasitic capacitances. Satisfactory experimental verifications on electronic tunability of some wave shaping applications by the integrator and a double-integrator feedback loop (DIFL) based sinusoid oscillator with linear f o variation range of 60 KHz~1.8 MHz at low THD of 2.1% are verified by both simulation and hardware tests.

Real-time indoor monitoring system based on wireless sensor networks

NASA Astrophysics Data System (ADS)

Wu, Zhengzhong; Liu, Zilin; Huang, Xiaowei; Liu, Jun

2008-10-01

Wireless sensor networks (WSN) greatly extend our ability to monitor and control the physical world. It can collaborate and aggregate a huge amount of sensed data to provide continuous and spatially dense observation of environment. The control and monitoring of indoor atmosphere conditions represents an important task with the aim of ensuring suitable working and living spaces to people. However, the comprehensive air quality, which includes monitoring of humidity, temperature, gas concentrations, etc., is not so easy to be monitored and controlled. In this paper an indoor WSN monitoring system was developed. In the system several sensors such as temperature sensor, humidity sensor, gases sensor, were built in a RF transceiver board for monitoring indoor environment conditions. The indoor environmental monitoring parameters can be transmitted by wireless to database server and then viewed throw PC or PDA accessed to the local area networks by administrators. The system, which was also field-tested and showed a reliable and robust characteristic, is significant and valuable to people.

Artificial reproduction of wild and cultured barbel (Barbus barbus, Cyprinidae) under controlled conditions.

PubMed

Targońska, Katarzyna; Kucharczyk, Dariusz; Zarski, Daniel; Cejko, Beata Irena; Krejszeff, Sławomir; Kupren, Krzysztof; Król, Radosław; Dryl, Katarzyna; Kowalski, Radosław Kajetan; Glogowski, Jan

2011-09-01

The aim of this work was to compare the effects of controlled reproduction of cultured and wild common barbel, Barbus barbus (L.). Preparations containing different GnRH analogues and dopamine receptor antagonists (Ovopel, Ovaprim) as well as human chorionic gonadotropin (hCG) (in the case of cultured fish) were applied and their influence on ovulation, spermiation and quality of gametes obtained was determined. No differences in the qualitative or quantitative parameters of semen were found between fish stimulated with different hormonal preparations and those not receiving hormonal stimulation. The high suitability of Ovaprim for ovulation induction in (cultured and wild) barbel was confirmed. The highest synchronisation of ovulation was obtained after the application of Ovopel (18 ± 3 h), but the best results of controlled reproduction (expressed as the percentage of ovulations and survival of embryos) were obtained by applying Ovaprim (83.2 ± 4.1). A significantly higher percentage of ovulation was obtained in cultured fish (80-90%) than in wild fish (< 25%).

Solar Power Satellite (SPS) fiber optic link assessment

NASA Technical Reports Server (NTRS)

1980-01-01

A feasibility demonstration of a 980 MHz fiber optic link for the Solar Power Satellite (SPS) phase reference distribution system was accomplished. A dual fiber-optic link suitable for a phase distribution frequency of 980 MHz was built and tested. The major link components include single mode injection laser diodes, avalanche photodiodes, and multimode high bandwidth fibers. Signal throughput was demonstrated to be stable and of high quality in all cases. For a typical SPS link length of 200 meters, the transmitted phase at 980 MHz varies approximately 2.5 degrees for every deg C of fiber temperature change. This rate is acceptable because of the link length compensation feature of the phase control design.

Effect of steel structure and defects on reliability of parts of impact mechanisms

NASA Astrophysics Data System (ADS)

Popelyukh, AI; Repin, AA; Alekseev, SE

2018-03-01

The paper discusses selection of materials suitable for manufacturing critical parts of impact mechanisms. It is shown that in order to extend life of parts exposed to high dynamic loading, it is expedient to use medium- and high-carbon alloy-treated steels featuring low impurity with nonmetallic inclusions and high hardening characteristics. Application of thermally untreated parts is undesirable as steel having ferrite–pearlite structure possesses low fatigue strength. Aimed to ensure high reliability of parts with a hardness of 42–55 HRC, steel should be reinforced by thermal treatement with the formation of multicomponent martensite–bainite structure. High-quality production should include defectoscopy and incoming material control.

Ductile Tearing Resistance Indexing of Automotive Grade DP 590 Steel Sheets: EWF Testing Using DENT Specimens

NASA Astrophysics Data System (ADS)

Sahoo, Subhadra; Padmapriya, N.; De, Partha Sarathi; Chakraborti, P. C.; Ray, S. K.

2018-03-01

The essential work of fracture (EWF) method has been explored for indexing the ductile tearing resistance of DP 590 automotive grade dual-phase steel sheet both in longitudinal (L-T) and transverse (T-L) orientations. The simplest possible test and analysis procedures have been adopted. The EWF method is found to be eminently suitable for routine quality control and product development purposes for such materials. Areas for further research for improving the experimental strategy are highlighted. For the investigated steel sheet, the estimated tearing resistance is found to be distinctly higher for the L-T orientation compared to the T-L orientation; the reason thereof merits further investigation.

Chalcogenide based rib waveguide for compact on-chip supercontinuum sources in mid-infrared domain

NASA Astrophysics Data System (ADS)

Saini, Than Singh; Tiwari, Umesh Kumar; Sinha, Ravindra Kumar

2017-08-01

We have designed and analysed a rib waveguide structure in recently reported Ga-Sb-S based highly nonlinear chalcogenide glass for nonlinear applications. The proposed waveguide structure possesses a very high nonlinear coefficient and can be used to generate broadband supercontinuum in mid-infrared domain. The reported design of the chalcogenide waveguide offers two zero dispersion values at 1800 nm and 2900 nm. Such rib waveguide structure is suitable to generate efficient supercontinuum generation ranging from 500 - 7400 μm. The reported waveguide can be used for the realization of the compact on-chip supercontinuum sources which are highly applicable in optical imaging, optical coherence tomography, food quality control, security and sensing.

Environmental quality assessment of groundwater resources in Al Jabal Al Akhdar, Sultanate of Oman

NASA Astrophysics Data System (ADS)

Al-Kalbani, Mohammed Saif; Price, Martin F.; Ahmed, Mushtaque; Abahussain, Asma; O'Higgins, Timothy

2017-11-01

The research was conducted to assess the quality of groundwater resources of Al Jabal Al Akhdar, Oman. 11 drinking water sources were sampled during summer and winter seasons during 2012-2013 to evaluate their physico-chemical quality indicators; and assess their suitability for drinking and other domestic purposes. Sample collection, handling and processing followed the standard methods recommended by APHA and analyzed in quality assured laboratories using appropriate analytical methods and instrumental techniques. The results show that the quality parameters in all drinking water resources are within the permissible limits set by Omani and WHO standards; and the drinking water quality index is good or medium in quality based on NFS-WQI classification criteria, indicating their suitability for human consumption. There is an indication of the presence of high nitrate concentrations in some groundwater wells, which require more investigations and monitoring program to be conducted on regular basis to ensure good quality water supply for the residents in the mountain. The trilinear Piper diagram shows that most of the drinking water resources of the study area fall in the field of calcium and bicarbonate type with some magnesium bicarbonate type indicating that most of the major ions are natural in origin due to the geology of the region. This study is a first step towards providing indicators on groundwater quality of this fragile mountain ecosystem, which will be the basis for future planning decisions on corrective demand management measures to protect groundwater resources of Al Jabal Al Akhdar.

Suitability Evaluation on River Bank Filtration of the Second Songhua River, China

NASA Astrophysics Data System (ADS)

Wang, Lixue; Ye, Xueyan; Du, Xinqiang

2016-04-01

The Second Songhua River is the biggest river with the most economic value in Jilin Province, China. In recent years, with the rapid development of economy, water resources and water environment problem is getting prominent, including surface water pollution and over exploitation of groundwater resources, etc. By means of bank filtration, the Second Songhua River basin might realize the combined utilization of regional groundwater and surface water, and thus has important significance for the guarantee of water demand for industrial and agricultural production planning in the basin. The following steps were adopted to evaluate the suitability of bank filtration nearby the Scond Songhua River : Firstly, in order to focus on the most possible area, the evaluation area was divided based on the aspects of natural geographical conditions and hydraulic connection extent between river water and groundwater. Second, the main suitability indexes including water quantity, water quality, interaction intensity between surface water and groundwater, and the exploitation condition of groundwater resource, and nine sub-indexes including hydraulic conductivity, aquifer thickness, river runoff, the status of groundwater quality, the status of surface water quality, groundwater hydraulic gradient, possible influence zone width of surface water under the condition of groundwater exploitation, permeability of riverbed layer and groundwater depth were proposed to establish an evaluation index system for the suitability of river bank filtration. Thirdly, Combined with the natural geography, geology and hydrogeology conditions of the Second Songhua River basin, the ArcGIS technology is used to complete the evaluation of the various indicators. According to the weighted sum of each index, the suitability of river bank filtration in the study area is divided into five grades. The evaluation index system and evaluation method established in this article are applicable to the Second Songhua River basin, which have clear pertinence and limitation. For future generalization of the evaluation index system, the specific evaluation index and its scoring criteria should be modified appropriately based on local conditions.

Relative effects of road risk, habitat suitability, and connectivity on wildlife roadkills: the case of tawny owls (Strix aluco).

PubMed

Santos, Sara M; Lourenço, Rui; Mira, António; Beja, Pedro

2013-01-01

Despite its importance for reducing wildlife-vehicle collisions, there is still incomplete understanding of factors responsible for high road mortality. In particular, few empirical studies examined the idea that spatial variation in roadkills is influenced by a complex interplay between road-related factors, and species-specific habitat quality and landscape connectivity. In this study we addressed this issue, using a 7-year dataset of tawny owl (Strix aluco) roadkills recorded along 37 km of road in southern Portugal. We used a multi-species roadkill index as a surrogate of intrinsic road risk, and we used a Maxent distribution model to estimate habitat suitability. Landscape connectivity was estimated from least-cost paths between tawny owl territories, using habitat suitability as a resistance surface. We defined 10 alternative scenarios to compute connectivity, based on variation in potential movement patterns according to territory quality and dispersal distance thresholds. Hierarchical partitioning of a regression model indicated that independent variation in tawny owl roadkills was explained primarily by the roadkill index (70.5%) and, to a much lesser extent, by landscape connectivity (26.2%), while habitat suitability had minor effects (3.3%). Analysis of connectivity scenarios suggested that owl roadkills were primarily related to short range movements (<5 km) between high quality territories. Tawny owl roadkills were spatially autocorrelated, but the introduction of spatial filters in the regression model did not change the type and relative contribution of environmental variables. Overall, results suggest that road-related factors may have a dominant influence on roadkill patterns, particularly in areas like ours where habitat quality and landscape connectivity are globally high for the study species. Nevertheless, the study supported the view that functional connectivity should be incorporated whenever possible in roadkill models, as it may greatly increase their power to predict the location of roadkill hotspots.

Relative Effects of Road Risk, Habitat Suitability, and Connectivity on Wildlife Roadkills: The Case of Tawny Owls (Strix aluco)

PubMed Central

Santos, Sara M.; Lourenço, Rui; Mira, António; Beja, Pedro

2013-01-01

Background Despite its importance for reducing wildlife-vehicle collisions, there is still incomplete understanding of factors responsible for high road mortality. In particular, few empirical studies examined the idea that spatial variation in roadkills is influenced by a complex interplay between road-related factors, and species-specific habitat quality and landscape connectivity. Methodology/Principal Findings In this study we addressed this issue, using a 7-year dataset of tawny owl (Strix aluco) roadkills recorded along 37 km of road in southern Portugal. We used a multi-species roadkill index as a surrogate of intrinsic road risk, and we used a Maxent distribution model to estimate habitat suitability. Landscape connectivity was estimated from least-cost paths between tawny owl territories, using habitat suitability as a resistance surface. We defined 10 alternative scenarios to compute connectivity, based on variation in potential movement patterns according to territory quality and dispersal distance thresholds. Hierarchical partitioning of a regression model indicated that independent variation in tawny owl roadkills was explained primarily by the roadkill index (70.5%) and, to a much lesser extent, by landscape connectivity (26.2%), while habitat suitability had minor effects (3.3%). Analysis of connectivity scenarios suggested that owl roadkills were primarily related to short range movements (<5 km) between high quality territories. Tawny owl roadkills were spatially autocorrelated, but the introduction of spatial filters in the regression model did not change the type and relative contribution of environmental variables. Conclusions Overall, results suggest that road-related factors may have a dominant influence on roadkill patterns, particularly in areas like ours where habitat quality and landscape connectivity are globally high for the study species. Nevertheless, the study supported the view that functional connectivity should be incorporated whenever possible in roadkill models, as it may greatly increase their power to predict the location of roadkill hotspots. PMID:24278226

Rocky-shore communities as indicators of water quality: a case study in the Northwestern Mediterranean.

PubMed

Pinedo, Susana; García, María; Satta, Maria Paola; de Torres, Mariona; Ballesteros, Enric

2007-01-01

The collection of 152 samples from the upper sublittoral zone along the rocky coasts of Catalonia (Northwestern Mediterranean) was carried out in 1999 in order to test the suitability of littoral communities to be used as indicators of water quality in the frame of the European Water Framework Directive. Detrended correspondence analysis were performed to distinguish between different communities and to relate communities composition to water quality. Samples collected in reference sites were included in the analysis. Mediterranean rocky shore communities situated in the upper sublittoral zone can be used as indicators of the water quality: there is a gradient from high to bad status that comprises from dense Cystoseira mediterranea forests to green algae dominated communities. The geographical patterns in the distribution of these communities show that the best areas are situated in the Northern coast, where tourism is the main economic resource of the area, and the worst area is situated close to the metropolitan zone of Barcelona with high population and industrial development. Thus, Mediterranean sublittoral rocky shore communities are useful indicators of water quality and multivariate analysis are a suitable statistical tool for the assessment of the ecological status.

The Emergent Properties of Conspecific Attraction Can Limit a Species' Ability to Track Environmental Change.

PubMed

Stodola, Kirk W; Ward, Michael P

2017-06-01

Multiple biotic, abiotic, and evolutionary constraints interact to determine a species' range. However, most species are not present in all suitable and accessible locations. Dispersal ability may explain why many species do not occupy all suitable habitat, but highly mobile species also exhibit a mismatch. Habitat selection behavior where individuals are site faithful and settle near conspecifics could create a social pressure that make a species' geographic range resistant to change. We investigated this possibility by using an individual-based model of habitat selection where habitat quality moved each year. Our model demonstrated the benefits of conspecific attraction in relatively stable environments and its detrimental influence when habitat quality shifted rapidly. These results were most apparent when adult survival was high, because site fidelity led to more individuals occupying poor-quality habitat areas as habitat quality changed. These individuals attracted other dispersing individuals, thereby decreasing the ability to track shifts in habitat quality, which we refer to as "social inertia." Consequently, social inertia may arise for species that exhibit site fidelity and conspecific attraction, which may have conservation implications in light of climate change and widespread alteration of natural habitats.

The OA System of College - - Design of the Teaching Quality Monitoring Subsystem

NASA Astrophysics Data System (ADS)

Wu, Hongjuan; Ying, Hong; Jiang, Youyi; Yan, Pei

According to the drawbacks of traditional teaching quality monitoring subsystems and based on the achievements of practical research in the teaching quality monitoring administration in College, this paper provides a design of overall structure of teaching quality monitoring subsystem, that is more suitable for colleges' management. This new system is endowed with the same features as .NET application programes: easy to extend, easy to maintain, flexible, convenient, and it let enterprises, students' parents and excellent graduates participate in teaching quality monitoring administration, have significant effect to ensure the quality of talent training in colleges.

Effect of using reporting guidelines during peer review on quality of final manuscripts submitted to a biomedical journal: masked randomised trial

PubMed Central

Cortés, J; Ribera, J M; Cardellach, F; Selva-O’Callaghan, A; Kostov, B; García, L; Cirugeda, L; Altman, D G; González, J A; Sànchez, J A; Miras, F; Urrutia, A; Fonollosa, V; Rey-Joly, C; Vilardell, M

2011-01-01

Objective To investigate the effect of an additional review based on reporting guidelines such as STROBE and CONSORT on quality of manuscripts. Design Masked randomised trial. Population Original research manuscripts submitted to the Medicina Clínica journal from May 2008 to April 2009 and considered suitable for publication. Intervention Control group: conventional peer reviews alone. Intervention group: conventional review plus an additional review looking for missing items from reporting guidelines. Outcomes Manuscript quality, assessed with a 5 point Likert scale (primary: overall quality; secondary: average quality of specific items in paper). Main analysis compared groups as allocated, after adjustment for baseline factors (analysis of covariance); sensitivity analysis compared groups as reviewed. Adherence to reviewer suggestions assessed with Likert scale. Results Of 126 consecutive papers receiving conventional review, 34 were not suitable for publication. The remaining 92 papers were allocated to receive conventional reviews alone (n=41) or additional reviews (n=51). Four papers assigned to the conventional review group deviated from protocol; they received an additional review based on reporting guidelines. We saw an improvement in manuscript quality in favour of the additional review group (comparison as allocated, 0.25, 95% confidence interval –0.05 to 0.54; as reviewed, 0.33, 0.03 to 0.63). More papers with additional reviews than with conventional reviews alone improved from baseline (22 (43%) v eight (20%), difference 23.6% (3.2% to 44.0%), number needed to treat 4.2 (from 2.3 to 31.2), relative risk 2.21 (1.10 to 4.44)). Authors in the additional review group adhered more to suggestions from conventional reviews than to those from additional reviews (average increase 0.43 Likert points (0.19 to 0.67)). Conclusions Additional reviews based on reporting guidelines improve manuscript quality, although the observed effect was smaller than hypothesised and not definitively demonstrated. Authors adhere more to suggestions from conventional reviews than to those from additional reviews, showing difficulties in adhering to high methodological standards at the latest research phases. To boost paper quality and impact, authors should be aware of future requirements of reporting guidelines at the very beginning of their study. Trial registration and protocol Although registries do not include trials of peer review, the protocol design was submitted to sponsored research projects (Instituto de Salud Carlos III, PI081903). PMID:22108262

Water quality bioassay using selected protozoa. I. [Paramecium candatum; Amoeba proteus; Euglena gracilis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, W.L.

1976-01-01

The suitability of certain species of protozoa as indicators of water quality has been determined. Experiments were conducted under laboratory conditions to standardize a bioassay procedure for water quality using either Paramecium caudatum, Amoeba proteus, or Euglena gracilis as the indicator organism. The bioassay, which consists of exposing the organisms to a known concentration of pollutant under laboratory conditions, followed by microscopic observation to establish the time of death, affords a reliable, convenient and inexpensive way to monitor for water quality.

Evaluation of the functional performance and technical quality of an Electronic Documentation System of the Nursing Process.

PubMed

de Oliveira, Neurilene Batista; Peres, Heloisa Helena Ciqueto

2015-01-01

To evaluate the functional performance and the technical quality of the Electronic Documentation System of the Nursing Process of the Teaching Hospital of the University of São Paulo. exploratory-descriptive study. The Quality Model of regulatory standard 25010 and the Evaluation Process defined under regulatory standard 25040, both of the International Organization for Standardization/International Electrotechnical Commission. The quality characteristics evaluated were: functional suitability, reliability, usability, performance efficiency, compatibility, security, maintainability and portability. The sample was made up of 37 evaluators. in the evaluation of the specialists in information technology, only the characteristic of usability obtained a rate of positive responses of less than 70%. For the nurse lecturers, all the quality characteristics obtained a rate of positive responses of over 70%. The staff nurses of the medical and surgical clinics with experience in using the system) and staff nurses from other units of the hospital and from other health institutions (without experience in using the system) obtained rates of positive responses of more than 70% referent to the functional suitability, usability, and security. However, performance efficiency, reliability and compatibility all obtained rates below the parameter established. the software achieved rates of positive responses of over 70% for the majority of the quality characteristics evaluated.

Estimation of contribution ratios of pollutant sources to a specific section based on an enhanced water quality model.

PubMed

Cao, Bibo; Li, Chuan; Liu, Yan; Zhao, Yue; Sha, Jian; Wang, Yuqiu

2015-05-01

Because water quality monitoring sections or sites could reflect the water quality status of rivers, surface water quality management based on water quality monitoring sections or sites would be effective. For the purpose of improving water quality of rivers, quantifying the contribution ratios of pollutant resources to a specific section is necessary. Because physical and chemical processes of nutrient pollutants are complex in water bodies, it is difficult to quantitatively compute the contribution ratios. However, water quality models have proved to be effective tools to estimate surface water quality. In this project, an enhanced QUAL2Kw model with an added module was applied to the Xin'anjiang Watershed, to obtain water quality information along the river and to assess the contribution ratios of each pollutant source to a certain section (the Jiekou state-controlled section). Model validation indicated that the results were reliable. Then, contribution ratios were analyzed through the added module. Results show that among the pollutant sources, the Lianjiang tributary contributes the largest part of total nitrogen (50.43%), total phosphorus (45.60%), ammonia nitrogen (32.90%), nitrate (nitrite + nitrate) nitrogen (47.73%), and organic nitrogen (37.87%). Furthermore, contribution ratios in different reaches varied along the river. Compared with pollutant loads ratios of different sources in the watershed, an analysis of contribution ratios of pollutant sources for each specific section, which takes the localized chemical and physical processes into consideration, was more suitable for local-regional water quality management. In summary, this method of analyzing the contribution ratios of pollutant sources to a specific section based on the QUAL2Kw model was found to support the improvement of the local environment.

Humic Fertilizer and Vermicompost Applied to the Soil Can Positively Affect Population Growth Parameters of Trichogramma brassicae (Hymenoptera: Trichogrammatidae) on Eggs of Tuta absoluta (Lepidoptera: Gelechiidae).

PubMed

Mohamadi, P; Razmjou, J; Naseri, B; Hassanpour, M

2017-12-01

The tomato leaf miner, Tuta absoluta (Meyrick), is a devastating pest of tomato worldwide. One of the control measures of T. absoluta is the use of biological control agents, such as Trichogramma wasps. Interactions between natural enemies and insect pests may be affected by application of fertilizers, because changes in plant quality through the fertilizer application may therefore affect herbivore characteristics and suitability of them to parasitism. Laboratory tests were carried out to evaluate the life table parameters of Trichogramma brassicae Bezdenko on T. absoluta eggs reared on tomato plants treated either with vermicompost (40%), humic fertilizer (2 g/kg soil), or control (suitable mixture of field soil and sand). Population growth parameters of T. brassicae were affected by fertilizer treatments. Significant differences were found for immature life period and total fecundity of T. brassicae on the treatments. Differences of intrinsic rate of natural increase (r m ), finite rate of increase (λ), net reproductive rate (R 0 ), mean generation time (T), and doubling time (DT) of T. brassicae among treatments were also significant. The lowest values of r m , λ, and R 0 were recorded for T. brassicae developed on T. absoluta eggs on control treatment, whereas the highest values of these parameters were observed on 2 g/kg humic fertilizer. Furthermore, T. brassicae had the shortest T and DT values on 2 g/kg humic fertilizer and 40% vermicompost treatments. Our results showed that application of humic fertilizer and vermicompost could positively affect population growth parameters of T. brassicae on eggs of T. absoluta fed on tomato plants.

Identifying and attributing common data quality problems: temperature and precipitation observations in Bolivia and Peru

NASA Astrophysics Data System (ADS)

Hunziker, Stefan; Gubler, Stefanie; Calle, Juan; Moreno, Isabel; Andrade, Marcos; Velarde, Fernando; Ticona, Laura; Carrasco, Gualberto; Castellón, Yaruska; Oria Rojas, Clara; Brönnimann, Stefan; Croci-Maspoli, Mischa; Konzelmann, Thomas; Rohrer, Mario

2016-04-01

Assessing climatological trends and extreme events requires high-quality data. However, for many regions of the world, observational data of the desired quality is not available. In order to eliminate errors in the data, quality control (QC) should be applied before data analysis. If the data still contains undetected errors and quality problems after QC, a consequence may be misleading and erroneous results. A region which is seriously affected by observational data quality problems is the Central Andes. At the same time, climatological information on ongoing climate change and climate risks are of utmost importance in this area due to its vulnerability to meteorological extreme events and climatic changes. Beside data quality issues, the lack of metadata and the low station network density complicate quality control and assessment, and hence, appropriate application of the data. Errors and data problems may occur at any point of the data generation chain, e.g. due to unsuitable station configuration or siting, poor station maintenance, erroneous instrument reading, or inaccurate data digitalization and post processing. Different measurement conditions in the predominantly conventional station networks in Bolivia and Peru compared to the mostly automated networks e.g. in Europe or Northern America may cause different types of errors. Hence, applying QC methods used on state of the art networks to Bolivian and Peruvian climate observations may not be suitable or sufficient. A comprehensive amount of Bolivian and Peruvian maximum and minimum temperature and precipitation in-situ measurements were analyzed to detect and describe common data quality problems. Furthermore, station visits and reviews of the original documents were done. Some of the errors could be attributed to a specific source. Such information is of great importance for data users, since it allows them to decide for what applications the data still can be used. In ideal cases, it may even allow to correct the error. Strategies on how to deal with data from the Central Andes will be suggested. However, the approach may be applicable to networks from other countries where conditions of climate observations are comparable.

Evaluation of Quality-Assurance/Quality-Control Data Collected by the U.S. Geological Survey from Wells and Springs between the Southern Boundary of the Idaho National Engineering and Environmental Laboratory and the Hagerman Area, Idaho, 1989 through 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, L.M.; Bartholomay, R.C.; Campbell, L.J.

1998-10-01

The U.S. Geological (USGS) and the Idaho Department of Water Resources, in cooperation with the U.S. Department of Energy, collected and analyzed water samples to monitor the water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman area, Idaho. Concurrently, replicate samples and blank samples were collected and analyzed as part of the quality-assurance/quality-control program. Samples were analyzed from inorganic constituents, gross radioactivity and radionuclides, organic constituents, and stable isotopes. To evaluate the precision of field and laboratory methods, analytical results of the water-quality and replicate samplesmore » were compared statistically for equivalence on the basis of the precision associated with each result. Statistical comparisons of the data indicated that 95 percent of the results of the replicate pairs were equivalent. Blank-sample analytical results indicated th at the inorganic blank water and volatile organic compound blank water from the USGS National Water Quality Laboratory and the distilled water from the Idaho Department of Water Resources were suitable for blanks; blank water from other sources was not. Equipment-blank analytical results were evaluated to determine if a bias had been introduced and possible sources of bias. Most equipment blanks were analyzed for trace elements and volatile organic compounds; chloroform was found in one equipment blank. Two of the equipment blanks were prepared after collection and analyses of the water-quality samples to determine whether contamination had been introduced during the sampling process. Results of one blank indicated that a hose used to divert water away from pumps and electrical equipment had contaminated the samples with some volatile organic compounds. Results of the other equipment blank, from the apparatus used to filter dissolved organic carbon samples, indicated that the filtering apparatus did not affect water-quality samples.« less

A joint prevention and control mechanism for air pollution in the Beijing-Tianjin-Hebei region in china based on long-term and massive data mining of pollutant concentration

NASA Astrophysics Data System (ADS)

Wang, Hongbo; Zhao, Laijun

2018-02-01

China's Beijing-Tianjin-Hebei (BTH) region suffers from the country's worst air pollution. The problem has caused widespread concern both at home and abroad. Based on long-term and massive data mining of PM2.5 and PM10 concentration, we found that these pollutants showed similar variations in four seasons, but the most severe pollution was in winter. Through cluster analysis of the winter daily average concentration (DAC) of the two pollutants, we defined regions with similar variations in pollutant concentrations in winter. For the most polluted cities in BTH, the relationship between correlation coefficients for winter DAC and the distance between cities revealed that PM2.5 has regional, large-scale characteristics, with concentrated outbreaks, whereas PM10 has local, small-scale characteristics, with outbreaks at multiple locations. By selecting the key cities with the strongest linear relationship between the pollutant's DAC of each city and the daily individual air quality index values of the BTH region and through cluster analysis on the correlations between the pollutant DACs of the key cities, we defined regional divisions suitable for Joint Prevention and Control of Atmospheric Pollution (JPCAP) program to control PM2.5 and PM10. Comprehensively considering the degree of influence of regional atmospheric pollution control (RAPC) on air quality in BTH, as well as the elasticity and urgency of RAPC, we defined the control grades of the JPCAP regions. We found both the regions and corresponding control grades were consistent for PM2.5 and PM10. The thinking and methods of atmospheric pollution control we proposed will have broad significance for implementation of RAPC in other regions around the world.

Optimising UAV topographic surveys processed with structure-from-motion: Ground control quality, quantity and bundle adjustment

NASA Astrophysics Data System (ADS)

James, Mike R.; Robson, Stuart; d'Oleire-Oltmanns, Sebastian; Niethammer, Uwe

2016-04-01

Structure-from-motion (SfM) algorithms are greatly facilitating the production of detailed topographic models based on images collected by unmanned aerial vehicles (UAVs). However, SfM-based software does not generally provide the rigorous photogrammetric analysis required to fully understand survey quality. Consequently, error related to problems in control point data or the distribution of control points can remain undiscovered. Even if these errors are not large in magnitude, they can be systematic, and thus have strong implications for the use of products such as digital elevation models (DEMs) and orthophotos. Here, we develop a Monte Carlo approach to (1) improve the accuracy of products when SfM-based processing is used and (2) reduce the associated field effort by identifying suitable lower density deployments of ground control points. The method highlights over-parameterisation during camera self-calibration and provides enhanced insight into control point performance when rigorous error metrics are not available. Processing was implemented using commonly-used SfM-based software (Agisoft PhotoScan), which we augment with semi-automated and automated GCPs image measurement. We apply the Monte Carlo method to two contrasting case studies - an erosion gully survey (Taurodont, Morocco) carried out with an fixed-wing UAV, and an active landslide survey (Super-Sauze, France), acquired using a manually controlled quadcopter. The results highlight the differences in the control requirements for the two sites, and we explore the implications for future surveys. We illustrate DEM sensitivity to critical processing parameters and show how the use of appropriate parameter values increases DEM repeatability and reduces the spatial variability of error due to processing artefacts.

Using Rainfall and Temperature Data in the Evaluation of National Malaria Control Programs in Africa.

PubMed

Thomson, Madeleine C; Ukawuba, Israel; Hershey, Christine L; Bennett, Adam; Ceccato, Pietro; Lyon, Bradfield; Dinku, Tufa

2017-09-01

Since 2010, the Roll Back Malaria (RBM) Partnership, including National Malaria Control Programs, donor agencies (e.g., President's Malaria Initiative and Global Fund), and other stakeholders have been evaluating the impact of scaling up malaria control interventions on all-cause under-five mortality in several countries in sub-Saharan Africa. The evaluation framework assesses whether the deployed interventions have had an impact on malaria morbidity and mortality and requires consideration of potential nonintervention influencers of transmission, such as drought/floods or higher temperatures. Herein, we assess the likely effect of climate on the assessment of the impact malaria interventions in 10 priority countries/regions in eastern, western, and southern Africa for the President's Malaria Initiative. We used newly available quality controlled Enhanced National Climate Services rainfall and temperature products as well as global climate products to investigate likely impacts of climate on malaria evaluations and test the assumption that changing the baseline period can significantly impact on the influence of climate in the assessment of interventions. Based on current baseline periods used in national malaria impact assessments, we identify three countries/regions where current evaluations may overestimate the impact of interventions (Tanzania, Zanzibar, Uganda) and three countries where current malaria evaluations may underestimate the impact of interventions (Mali, Senegal and Ethiopia). In four countries (Rwanda, Malawi, Mozambique, and Angola) there was no strong difference in climate suitability for malaria in the pre- and post-intervention period. In part, this may be due to data quality and analysis issues.

Induced wettability and surface-volume correlation of composition for bovine bone derived hydroxyapatite particles

NASA Astrophysics Data System (ADS)

Maidaniuc, Andreea; Miculescu, Florin; Voicu, Stefan Ioan; Andronescu, Corina; Miculescu, Marian; Matei, Ecaterina; Mocanu, Aura Catalina; Pencea, Ion; Csaki, Ioana; Machedon-Pisu, Teodor; Ciocan, Lucian Toma

2018-04-01

Hydroxyapatite powders characteristics need to be determined both for quality control purposes and for a proper control of microstructural features of bone reconstruction products. This study combines bulk morphological and compositional analysis methods (XRF, SEM-EDS, FT-IR) with surface-related methods (XPS, contact angle measurements) in order to correlate the characteristics of hydroxyapatite powders derived from bovine bone for its use in medical applications. An experimental approach for correlating the surface and volume composition was designed based on the analysis depth of each spectral method involved in the study. Next, the influences of powder particle size and forming method on the contact angle between water drops and ceramic surface were evaluated for identifying suitable strategies of tuning hydroxyapatite's wettability. The results revealed a preferential arrangement of chemical elements at the surface of hydroxyapatite particles which could induce a favourable material behaviour in terms of sinterability and biological performance.

A self-adaptive-grid method with application to airfoil flow

NASA Technical Reports Server (NTRS)

Nakahashi, K.; Deiwert, G. S.

1985-01-01

A self-adaptive-grid method is described that is suitable for multidimensional steady and unsteady computations. Based on variational principles, a spring analogy is used to redistribute grid points in an optimal sense to reduce the overall solution error. User-specified parameters, denoting both maximum and minimum permissible grid spacings, are used to define the all-important constants, thereby minimizing the empiricism and making the method self-adaptive. Operator splitting and one-sided controls for orthogonality and smoothness are used to make the method practical, robust, and efficient. Examples are included for both steady and unsteady viscous flow computations about airfoils in two dimensions, as well as for a steady inviscid flow computation and a one-dimensional case. These examples illustrate the precise control the user has with the self-adaptive method and demonstrate a significant improvement in accuracy and quality of the solutions.

Temperature corrected-calibration of GRACE's accelerometer

NASA Astrophysics Data System (ADS)

Encarnacao, J.; Save, H.; Siemes, C.; Doornbos, E.; Tapley, B. D.

2017-12-01

Since April 2011, the thermal control of the accelerometers on board the GRACE satellites has been turned off. The time series of along-track bias clearly show a drastic change in the behaviour of this parameter, while the calibration model has remained unchanged throughout the entire mission lifetime. In an effort to improve the quality of the gravity field models produced at CSR in future mission-long re-processing of GRACE data, we quantify the added value of different calibration strategies. In one approach, the temperature effects that distort the raw accelerometer measurements collected without thermal control are corrected considering the housekeeping temperature readings. In this way, one single calibration strategy can be consistently applied during the whole mission lifetime, since it is valid to thermal the conditions before and after April 2011. Finally, we illustrate that the resulting calibrated accelerations are suitable for neutral thermospheric density studies.

Approach to method development and validation in capillary electrophoresis for enantiomeric purity testing of active basic pharmaceutical ingredients.

PubMed

Sokoliess, Torsten; Köller, Gerhard

2005-06-01

A chiral capillary electrophoresis system allowing the determination of the enantiomeric purity of an investigational new drug was developed using a generic method development approach for basic analytes. The method was optimized in terms of type and concentration of both cyclodextrin (CD) and electrolyte, buffer pH, temperature, voltage, and rinsing procedure. Optimal chiral separation of the analyte was obtained using an electrolyte with 2.5% carboxymethyl-beta-CD in 25 mM NaH2PO4 (pH 4.0). Interchanging the inlet and outlet vials after each run improved the method's precision. To assure the method's suitability for the control of enantiomeric impurities in pharmaceutical quality control, its specificity, linearity, precision, accuracy, and robustness were validated according to the requirements of the International Conference on Harmonization. The usefulness of our generic method development approach for the validation of robustness was demonstrated.

The effect of fixatives and temperature on the quality of glycogen demonstration.

PubMed

Zakout, Yosef Mohamed Azzam; Salih, Magdi M; Ahmed, H G

2010-04-01

Glycogen is demonstrated in a number of lesions and is diagnostically significant, particularly in certain tumors. To stain glycogen accurately, it is essential to choose a suitable fixative, temperature and staining method. We used rabbit liver to assess these variables. Specimens were fixed in three fixatives at two temperatures: 10% formalin, neutral buffered formalin (NBF) and Bouin's solution at 37 and 4 degrees C. Seventy-two paraffin sections were prepared and stained with periodic acid-Schiff (PAS), hexamine (methenamine) silver and Best's carmine methods. Negative control sections using diastase digestion were used for all methods to confirm the presence of glycogen. For the PAS reaction, Bouin's fixative gave better results at both temperatures compared to the other fixatives. For hexamine (methenamine) silver, the quality of staining was improved for tissues fixed in both 10% formalin and NBF at 37 degrees C compared to Bouin's solution. Both 10% formalin and NBF at 4 degrees C gave better results than Bouin's solution. For Best's carmine, Bouin's solution gave the best results for tissues fixed at 4 degrees C. Fixation of tissues with NBF at 37 degrees C gave the best quality staining. We concluded that the quality of glycogen staining in paraffin sections is greatly affected by both the fixative and the temperature of fixation.

[Document management systems to support quality management systems at university hospitals - an interview-based study].

PubMed

Holderried, Martin; Bökel, Ann-Catrin; Ochsmann, Elke

2018-05-01

In order to save and control the processes and quality of medical services, a suitable steering system of all relevant documents is essential from the point of view of clinical quality management. Systems supporting an automated steering system of documents are called document management systems (DMS), and they also enter the healthcare sector. The use of DMS in the German healthcare sector has hardly been investigated so far. To close this knowledge gap, interviews were carried out with German university hospitals over a six-month period and subjected to a qualitative content analysis according to Mayring. In total, 25 university hospitals agreed to participate in this study, 19 of which have been working with a digital DMS for about six years on average. There was a great variety among the IT systems used. Document management and usability of the DMS as well as its integration into existing IT structures were key decision-making criteria for the selection of a digital DMS. In general, the long-term usability of the DMS is supported by regular evaluation of one's own requirements for the system, administration and training programs. In addition, DMS have a positive effect on patient safety and the quality of medical care. Copyright © 2018. Published by Elsevier GmbH.

Meat Quality Derived from High Inclusion of a Micro-Alga or Insect Meal as an Alternative Protein Source in Poultry Diets: A Pilot Study

PubMed Central

Neumann, Carmen; Velten, Susanne; Liebert, Frank

2018-01-01

The effects on meat quality resulting from alternative dietary protein sources (Spirulina and Hermetia meal) in poultry diets are studied to determine the overall suitability of these ingredients considering state-of-the-art packaging practices—highly oxygenated modified atmosphere packaging (HiOx MAP). We monitored standard slaughterhouse parameters, such as live weight, carcass weight, dressed yield, and pH at 20 min and 24 h post mortem. In addition, we studied the effects that 3 and 7-day storage in HiOx MAP has on the overall product physico-chemical and sensory properties. In addition to previously supported effects of HiOx MAP, we found that meat quality could be improved when Spirulina replaces 50% of the soy protein in broiler diets; however, this substitution results in a dark reddish-yellowish meat colour. On the other hand, the substitution with Hermetia larval meal results in a product that does not differ from the standard fed control group, with the exception that the breast filet has a more intense flavour that decreases over storage time. All-in-all Spirulina and Hermetia meal have the potential to replace soybean meal in broiler diets without deteriorating meat quality. PMID:29518048

Physical Land Suitability for Civet Arabica Coffee: Case Study of Bandung and West Bandung Regencies, Indonesia

NASA Astrophysics Data System (ADS)

Chairani, E.; Supriatna, J.; Koestoer, R.; Moeliono, M.

2017-12-01

Indonesia has been widely known as the best Arabica coffee (Coffea arabica) producer, in terms of both aspects, quality and number of product. Currently, its production, however, declines to the 3rd rank internationally. Issues emerged in the coffee cultivation are: land unsuitability, low quality of seeds, and poor management. Among Arabica coffee types, wild civet coffee is the most expensive one and harvested from the coffee beans which have been digested naturally. The study aims to determine the physical suitability of land as well as the constraints related to land for civet Arabica coffee in selected study cases, e.g., Bandung and Bandung Barat. The research methods employ multi-criteria analysis, and combined with weighted overlaying techniques for mapping. The criteria include temperature, rainfall, humidity, duration of dry season, slope, altitude, type of soil, soil texture, and erosion potential. Parameters of civet (Paradoxurus hermaphroditus) are land use, altitude, and temperature. Local policy strongly supports the extensive management for land and the increase of coffee export. Processing data involved matching the comparison between guideline requirements for the land suitability classes, characteristics of Arabica coffee and civet habitat. The results covered the profile suitable land of the civet Arabica coffee in the study areas.

Annual warm-season grasses vary for forage yield, quality, and competitiveness with weeds

USDA-ARS?s Scientific Manuscript database

Warm-season annual grasses may be suitable as herbicide-free forage crops. A two-year field study was conducted to determine whether tillage system and nitrogen (N) fertilizer application method influenced crop and weed biomass, water use, water use efficiency (WUE), and forage quality of three war...

Glass-to-Metal Seal Quality.

DTIC Science & Technology

1982-05-01

SELECTION AND EVALUATION . . . . . . . . . . . . . . 2 2.2 MICROELECTRONIC PACKAGES AND THEIR QUALITY . . . * . . . . . . . . 5 2.3 EQUIPMENT...liquid penetrant testing for various microelectronic package hermeticity. I t I MATERIALS AND EQUIPMENT 2.1 DYE PENETRANT SELECTION AND EVALUATION...a commercial visible dye penetrant and a commercial fluorescent dye penetrant were selected as being suitable for the testing of microelectronic

Application of the Total Quality Management Approach Principles and the ISO 9000 Standards in Engineering Education.

ERIC Educational Resources Information Center

Waks, Shlomo; Frank, Moti

1999-01-01

Discusses the applicability of the definition, principles, and underlying strategies of total quality management (TQM) for engineering education. Describes several tools and methods for the implementation of TQM and its suitability for a variety of school activities. Presents a TQM course outline combining lectures, discussions, suggested…