Alpha shape theory for 3D visualization and volumetric measurement of brain tumor progression using magnetic resonance images.

PubMed

Hamoud Al-Tamimi, Mohammed Sabbih; Sulong, Ghazali; Shuaib, Ibrahim Lutfi

2015-07-01

Resection of brain tumors is a tricky task in surgery due to its direct influence on the patients' survival rate. Determining the tumor resection extent for its complete information via-à-vis volume and dimensions in pre- and post-operative Magnetic Resonance Images (MRI) requires accurate estimation and comparison. The active contour segmentation technique is used to segment brain tumors on pre-operative MR images using self-developed software. Tumor volume is acquired from its contours via alpha shape theory. The graphical user interface is developed for rendering, visualizing and estimating the volume of a brain tumor. Internet Brain Segmentation Repository dataset (IBSR) is employed to analyze and determine the repeatability and reproducibility of tumor volume. Accuracy of the method is validated by comparing the estimated volume using the proposed method with that of gold-standard. Segmentation by active contour technique is found to be capable of detecting the brain tumor boundaries. Furthermore, the volume description and visualization enable an interactive examination of tumor tissue and its surrounding. Admirable features of our results demonstrate that alpha shape theory in comparison to other existing standard methods is superior for precise volumetric measurement of tumor. Copyright © 2015 Elsevier Inc. All rights reserved.

An Automated Weather Research and Forecasting (WRF)-Based Nowcasting System: Software Description

DTIC Science & Technology

2013-10-01

14. ABSTRACT A Web service /Web interface software package has been engineered to address the need for an automated means to run the Weather Research...An Automated Weather Research and Forecasting (WRF)- Based Nowcasting System: Software Description by Stephen F. Kirby, Brian P. Reen, and...Based Nowcasting System: Software Description Stephen F. Kirby, Brian P. Reen, and Robert E. Dumais Jr. Computational and Information Sciences

NARSTO PAC2001 SUMAS MTN GAS PM MET DATA

Atmospheric Science Data Center

2018-04-09

... Ion Chromatograph Pressure Sensor Aethaelometer Fluorescence Spectroscopy IR CO2 Analyzer Nephelometer ... Nitrogen Oxides Carbonaceous Aerosols Nitrate Particles Carbon Monoxide Aerosol Optical Depth/Thickness Order ...

Genetics Home Reference: alpha thalassemia X-linked intellectual disability syndrome

MedlinePlus

... thalassemia X-linked intellectual disability syndrome Alpha thalassemia X-linked intellectual disability syndrome Printable PDF Open All ... view the expand/collapse boxes. Description Alpha thalassemia X-linked intellectual disability syndrome is an inherited disorder ...

Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) user's guide and system description

NASA Technical Reports Server (NTRS)

Lo, P. S.; Card, D.

1983-01-01

The Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) is explained. The various software facilities of the SEL, DBAM operating procedures, and DBAM system information are described. The relationships among DBAM components (baseline diagrams), component descriptions, overlay descriptions, indirect command file listings, file definitions, and sample data collection forms are provided.

Analyses of requirements for computer control and data processing experiment subsystems: Image data processing system (IDAPS) software description (7094 version), volume 2

NASA Technical Reports Server (NTRS)

1973-01-01

A description of each of the software modules of the Image Data Processing System (IDAPS) is presented. The changes in the software modules are the result of additions to the application software of the system and an upgrade of the IBM 7094 Mod(1) computer to a 1301 disk storage configuration. Necessary information about IDAPS sofware is supplied to the computer programmer who desires to make changes in the software system or who desires to use portions of the software outside of the IDAPS system. Each software module is documented with: module name, purpose, usage, common block(s) description, method (algorithm of subroutine) flow diagram (if needed), subroutines called, and storage requirements.

SOHO Ultraviolet Coronagraph Spectrometer (UVCS) Mission Operations and Data Analysis

NASA Technical Reports Server (NTRS)

Kohl, John L.; Gurman, Joseph (Technical Monitor)

2003-01-01

The scientific goal of UVCS is to obtain detailed empirical descriptions of the extended solar corona as it evolves over the solar cycle and to use these descriptions to identify and understand the physical processes responsible for coronal heating, solar wind acceleration, coronal mass ejections (CMEs), and the phenomena that establish the plasma properties of the solar wind as measured by 'in situ' solar wind instruments. This report covers the period from 01 February 2002 to 15 February 2003. During that time, UVCS observations have consisted of three types: 1) standard synoptic observations comprising, primarily, the H I Ly alpha line profile and the O VI 103.2 and 103.7 nm intensity over a range of heights from 1.5 to about 3.0 solar radii and covering 360 degrees about the sun, 2) sit and stare watches for CMEs, and 3) special observations designed by the UVCS Lead Observer of the Week for a specific scientific purpose. The special observations are often coordinated with those of other space-based and ground-based instruments and they often are part of SOHO joint observation programs and campaigns. Lead observers have included UVCS Co-Investigators, scientists from the solar physics community and several graduate and undergraduate level students. UVCS has continued to achieve its purpose of using powerful spectroscopic diagnostic techniques to obtain a much more detailed description of coronal structures and dynamic phenomena than existed before the SOHO mission. The new descriptions of coronal mass ejections (CMEs) and coronal structures from UVCS have inspired a large number of theoretical studies aimed at identifying the physical processes responsible for CMEs and solar wind acceleration in coronal holes and streamers. UVCS has proven to be a very stable instrument. Stellar observations have demonstrated its stability. UVCS has required no flight software modifications and all mechanisms are operational. The UVCS O VI Channel with its redundant optical path for wavelengths near H I Ly alpha is capable of observing the entire UVCS wavelength range. Since December 1998, the O VI Channel has been used for all UVCS observations. Although the H I Ly alpha Channel and detector are still operational, increases in the dark count up to about 5 x 10(exp -4) counts/sec/pixel and an increase in high voltage current to within a factor of two of the maximum used in the laboratory before flight led to the decision to not use that detector at the present time. There is no significant decrease in the scientific capability of UVCS owing to the O VI channel redundant optical path. UVCS data, data analysis software, calibration files and the mission log are available from the SOHO archive and SAO. All UVCS data is now available to scientists and the general public via the SOHO Data Archive and SAO within three months of the observations. UVCS has resulted in 46 scientific papers in 2002. There were numerous presentations at scientific meetings. All requests for observation time by qualified outside users have been granted.

The Software Line-up: What Reviewers Look for When Evaluating Software.

ERIC Educational Resources Information Center

ELECTRONIC Learning, 1982

1982-01-01

Contains a check list to aid teachers in evaluating software used in computer-assisted instruction on microcomputers. The evaluation form contains three sections: program description, program evaluation, and overall evaluation. A brief description of a software evaluation program in use at the Granite School District in Utah is included. (JJD)

9 CFR 93.303 - Ports designated for the importation of horses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the importation of horses. (a) Air and ocean ports. The following ports have APHIS inspection and... Dakota; Derby Line and Highgate Springs, Vermont; Oroville and Sumas, Washington. (2) International Falls...

Financial constraints in capacity planning: a national utility regulatory model (NUREG). Volume III of III: software description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1981-10-29

This volume is the software description for the National Utility Regulatory Model (NUREG). This is the third of three volumes provided by ICF under contract number DEAC-01-79EI-10579. These three volumes are: a manual describing the NUREG methodology; a users guide; and a description of the software. This manual describes the software which has been developed for NUREG. This includes a listing of the source modules. All computer code has been written in FORTRAN.

Characterization and functional analyses of a novel chicken CD8a variant X1 (CD8a1)

USDA-ARS?s Scientific Manuscript database

We provide the first description of cloning, as well as structural and functional analysis of a novel variant in the chicken CD8alpha family, termed the CD8-alpha X1 (CD8alpha1) gene. Multiple alignment of CD8alpha1 with known CD8alpha and beta sequences of other species revealed relatively low con...

9 CFR 93.703 - Ports designated for importation.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., except as provided in paragraph (b) of this section, only through the following ports: (1) Air and ocean... Springs, VT; Oroville and Sumas, WA. (3) Mexican border ports. Douglas, Naco, Nogales, Sasabe, and San...

9 CFR 93.703 - Ports designated for importation.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., except as provided in paragraph (b) of this section, only through the following ports: (1) Air and ocean... Springs, VT; Oroville and Sumas, WA. (3) Mexican border ports. Douglas, Naco, Nogales, Sasabe, and San...

Elementary Keyboarding Software Product Reports.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This report provides detailed product descriptions of 45 software programs designed to teach or improve the keyboarding skills of elementary school students that were identified by the MicroSIFT (Microcomputer Information and Software for Teachers) staff. The descriptions include program titles, producer names, costs, grade levels, hardware,…

UAS-NAS Live Virtual Constructive Distributed Environment (LVC): LVC Gateway, Gateway Toolbox, Gateway Data Logger (GDL), SaaProc Software Design Description

NASA Technical Reports Server (NTRS)

Jovic, Srboljub

2015-01-01

This document provides the software design description for the two core software components, the LVC Gateway, the LVC Gateway Toolbox, and two participants, the LVC Gateway Data Logger and the SAA Processor (SaaProc).

Robust Coefficients Alpha and Omega and Confidence Intervals with Outlying Observations and Missing Data Methods and Software

ERIC Educational Resources Information Center

Zhang, Zhiyong; Yuan, Ke-Hai

2016-01-01

Cronbach's coefficient alpha is a widely used reliability measure in social, behavioral, and education sciences. It is reported in nearly every study that involves measuring a construct through multiple items. With non-tau-equivalent items, McDonald's omega has been used as a popular alternative to alpha in the literature. Traditional estimation…

Robust Coefficients Alpha and Omega and Confidence Intervals with Outlying Observations and Missing Data: Methods and Software

ERIC Educational Resources Information Center

Zhang, Zhiyong; Yuan, Ke-Hai

2016-01-01

Cronbach's coefficient alpha is a widely used reliability measure in social, behavioral, and education sciences. It is reported in nearly every study that involves measuring a construct through multiple items. With non-tau-equivalent items, McDonald's omega has been used as a popular alternative to alpha in the literature. Traditional estimation…

Pilot/Vehicle display development from simulation to flight

NASA Technical Reports Server (NTRS)

Dare, Alan R.; Burley, James R., II

1992-01-01

The Pilot Vehicle Interface Group, Cockpit Technology Branch, Flight Management Division, at the NASA Langley Research Center is developing display concepts for air combat in the next generation of highly maneuverable aircraft. The High-Alpha Technology Program, under which the research is being done, is involved in flight tests of many new control and display concepts on the High-Alpha Research Vehicle, a highly modified F-18 aircraft. In order to support display concept development through flight testing, a software/hardware system is being developed which will support each phase of the project with little or no software modifications, thus saving thousands of manhours in software development time. Simulation experiments are in progress now and flight tests are slated to begin in FY1994.

The SIFT hardware/software systems. Volume 2: Software listings

NASA Technical Reports Server (NTRS)

Palumbo, Daniel L.

1985-01-01

This document contains software listings of the SIFT operating system and application software. The software is coded for the most part in a variant of the Pascal language, Pascal*. Pascal* is a cross-compiler running on the VAX and Eclipse computers. The output of Pascal* is BDX-390 assembler code. When necessary, modules are written directly in BDX-390 assembler code. The listings in this document supplement the description of the SIFT system found in Volume 1 of this report, A Detailed Description.

Studying the Accuracy of Software Process Elicitation: The User Articulated Model

ERIC Educational Resources Information Center

Crabtree, Carlton A.

2010-01-01

Process models are often the basis for demonstrating improvement and compliance in software engineering organizations. A descriptive model is a type of process model describing the human activities in software development that actually occur. The purpose of a descriptive model is to provide a documented baseline for further process improvement…

Shuttle program. MCC Level C formulation requirements: Entry guidance and entry autopilot

NASA Technical Reports Server (NTRS)

Harpold, J. C.; Hill, O.

1980-01-01

A set of preliminary entry guidance and autopilot software formulations is presented for use in the Mission Control Center (MCC) entry processor. These software formulations meet all level B requirements. Revision 2 incorporates the modifications required to functionally simulate optimal TAEM targeting capability (OTT). Implementation of this logic in the MCC must be coordinated with flight software OTT implementation and MCC TAEM guidance OTT. The entry guidance logic is based on the Orbiter avionics entry guidance software. This MCC requirements document contains a definition of coordinate systems, a list of parameter definitions for the software formulations, a description of the entry guidance detailed formulation requirements, a description of the detailed autopilot formulation requirements, a description of the targeting routine, and a set of formulation flow charts.

A program code generator for multiphysics biological simulation using markup languages.

PubMed

Amano, Akira; Kawabata, Masanari; Yamashita, Yoshiharu; Rusty Punzalan, Florencio; Shimayoshi, Takao; Kuwabara, Hiroaki; Kunieda, Yoshitoshi

2012-01-01

To cope with the complexity of the biological function simulation models, model representation with description language is becoming popular. However, simulation software itself becomes complex in these environment, thus, it is difficult to modify the simulation conditions, target computation resources or calculation methods. In the complex biological function simulation software, there are 1) model equations, 2) boundary conditions and 3) calculation schemes. Use of description model file is useful for first point and partly second point, however, third point is difficult to handle for various calculation schemes which is required for simulation models constructed from two or more elementary models. We introduce a simulation software generation system which use description language based description of coupling calculation scheme together with cell model description file. By using this software, we can easily generate biological simulation code with variety of coupling calculation schemes. To show the efficiency of our system, example of coupling calculation scheme with three elementary models are shown.

Caesy: A software tool for computer-aided engineering

NASA Technical Reports Server (NTRS)

Wette, Matt

1993-01-01

A new software tool, Caesy, is described. This tool provides a strongly typed programming environment for research in the development of algorithms and software for computer-aided control system design. A description of the user language and its implementation as they currently stand are presented along with a description of work in progress and areas of future work.

Constructing the Japanese version of the Maslach Burnout Inventory-Student Survey: Confirmatory factor analysis.

PubMed

Tsubakita, Takashi; Shimazaki, Kazuyo

2016-01-01

To examine the factorial validity of the Maslach Burnout Inventory-Student Survey, using a sample of 2061 Japanese university students majoring in the medical and natural sciences (67.9% male, 31.8% female; Mage  = 19.6 years, standard deviation = 1.5). The back-translated scale used unreversed items to assess inefficacy. The inventory's descriptive properties and Cronbach's alphas were calculated using SPSS software. The present authors compared fit indices of the null, one factor, and default three factor models via confirmatory factor analysis with maximum-likelihood estimation using AMOS software, version 21.0. Intercorrelations between exhaustion, cynicism, and inefficacy were relatively higher than in prior studies. Cronbach's alphas were 0.76, 0.85, and 0.78, respectively. Although fit indices of the hypothesized three factor model did not meet the respective criteria, the model demonstrated better fit than did the null and one factor models. The present authors added four paths between error variables within items, but the modified model did not show satisfactory fit. Subsequent analysis revealed that a bi-factor model fit the data better than did the hypothesized or modified three factor models. The Japanese version of the Maslach Burnout Inventory-Student Survey needs minor changes to improve the fit of its three factor model, but the scale as a whole can be used to adequately assess overall academic burnout in Japanese university students. Although the scale was back-translated, two items measuring exhaustion whose expressions overlapped should be modified, and all items measuring inefficacy should be reversed in order to statistically clarify the factorial difference between the scale's three factors. © 2015 The Authors. Japan Journal of Nursing Science © 2015 Japan Academy of Nursing Science.

Advanced Transport Operating System (ATOPS) control display unit software description

NASA Technical Reports Server (NTRS)

Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

1992-01-01

The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

Testing flight software on the ground: Introducing the hardware-in-the-loop simulation method to the Alpha Magnetic Spectrometer on the International Space Station

NASA Astrophysics Data System (ADS)

Sun, Wenhao; Cai, Xudong; Meng, Qiao

2016-04-01

Complex automatic protection functions are being added to the onboard software of the Alpha Magnetic Spectrometer. A hardware-in-the-loop simulation method has been introduced to overcome the difficulties of ground testing that are brought by hardware and environmental limitations. We invented a time-saving approach by reusing the flight data as the data source of the simulation system instead of mathematical models. This is easy to implement and it works efficiently. This paper presents the system framework, implementation details and some application examples.

Automatic Requirements Specification Extraction from Natural Language (ARSENAL)

DTIC Science & Technology

2014-10-01

designers, implementers) involved in the design of software systems. However, natural language descriptions can be informal, incomplete, imprecise...communication of technical descriptions between the various stakeholders (e.g., customers, designers, imple- menters) involved in the design of software systems...the accuracy of the natural language processing stage, the degree of automation, and robustness to noise. 1 2 Introduction Software systems operate in

Department of the Air Force Information Technology Program FY 95 President’s Budget

DTIC Science & Technology

1994-03-01

2095 2200 552 900 1032 Description: Contractor hardware maintenan support, systems analyst support software development and maintenance, and off -the...hardware maintenance support, systems analyst support, operations support, configuration management, test support, and off -the-shelf software license...2419 2505 2594 Description: Contractor hardware maintenance support, systems analyst support, operations support, and off -the-shelf software license

Acute Toxicological Responses of Fischer Rats to Naturally Occurring Asbestos from theUnited States and Canada

EPA Science Inventory

This study was designed to provide understanding of the toxicity of naturally occurring asbestos (NOA) including Libby amphibole (LA), Sumas Mountain chrysotile (SM), EI Dorado Hills tremolite (ED) and Ontario actinolite/ferroactinolite cleavage fragments (ON). Ratrespirable fra...

Long-Term Toxicity of Naturally Occurring Asbestos in Male Fischer 344 Rats

EPA Science Inventory

Naturally occurring asbestos (NOA) fibers are found in geologic deposits that may be disturbed by mining, earthworks, or natural processes, resulting in adverse health risks to exposed individuals. The toxicities of Libby amphibole and NOA samples including Sumas Mountain chrysot...

High-aspect-ratio microstructures with versatile slanting angles on silicon by uniform metal-assisted chemical etching

NASA Astrophysics Data System (ADS)

Li, Liyi; Zhang, Cheng; Tuan, Chia-Chi; Chen, Yun; Wong, C.-P.

2018-05-01

High-aspect-ratio (HAR) microstructures on silicon (Si) play key roles in photonics and electromechanical devices. However, it has been challenging to fabricate HAR microstructures with slanting profiles. Here we report successful fabrication of uniform HAR microstructures with controllable slanting angles on (1 0 0)-Si by slanted uniform metal-assisted chemical etching (SUMaCE). The trenches have width of 2 µm, aspect ratio greater than 20:1 and high geometric uniformity. The slanting angles can be adjusted between 2-70° with respect to the Si surface normal. The results support a fundamental hypothesis that under the UMaCE condition, the preferred etching direction is along the normal of the thin film catalysts, regardless of the relative orientation of the catalyst to Si substrates or the crystalline orientation of the substrates. The SUMaCE method paves the way to HAR 3D microfabrication with arbitrary slanting profiles inside Si.

AOIPS 3 user's guide. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

Schotz, Steve S.; Piper, Thomas S.; Negri, Andrew J.

1990-01-01

The Atmospheric and Oceanographic Information Processing System (AOIPS) 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. A detailed description of very AOIPS program is presented. It is intended to serve as a reference for such items as program functionality, program operational instructions, and input/output variable descriptions. Program descriptions are derived from the on-line help information. Each program description is divided into two sections. The functional description section describes the purpose of the program and contains any pertinent operational information. The program description sections lists the program variables as they appear on-line, and describes them in detail.

Space Physics Data Facility Web Services

NASA Technical Reports Server (NTRS)

Candey, Robert M.; Harris, Bernard T.; Chimiak, Reine A.

2005-01-01

The Space Physics Data Facility (SPDF) Web services provides a distributed programming interface to a portion of the SPDF software. (A general description of Web services is available at http://www.w3.org/ and in many current software-engineering texts and articles focused on distributed programming.) The SPDF Web services distributed programming interface enables additional collaboration and integration of the SPDF software system with other software systems, in furtherance of the SPDF mission to lead collaborative efforts in the collection and utilization of space physics data and mathematical models. This programming interface conforms to all applicable Web services specifications of the World Wide Web Consortium. The interface is specified by a Web Services Description Language (WSDL) file. The SPDF Web services software consists of the following components: 1) A server program for implementation of the Web services; and 2) A software developer s kit that consists of a WSDL file, a less formal description of the interface, a Java class library (which further eases development of Java-based client software), and Java source code for an example client program that illustrates the use of the interface.

Binding Energy Calculation of Patchouli Alcohol Isomer Cyclooxygenase Complexes Suggested as COX-1/COX-2 Selective Inhibitor

PubMed Central

Mahdi, Chanif; Nurdiana, Nurdiana; Kikuchi, Takheshi; Fatchiyah, Fatchiyah

2014-01-01

To understand the structural features that dictate the selectivity of the two isoforms of the prostaglandin H2 synthase (PGHS/COX), the three-dimensional (3D) structure of COX-1/COX-2 was assessed by means of binding energy calculation of virtual molecular dynamic with using ligand alpha-Patchouli alcohol isomers. Molecular interaction studies with COX-1 and COX-2 were done using the molecular docking tools by Hex 8.0. Interactions were further visualized by using Discovery Studio Client 3.5 software tool. The binding energy of molecular interaction was calculated by AMBER12 and Virtual Molecular Dynamic 1.9.1 software. The analysis of the alpha-Patchouli alcohol isomer compounds showed that all alpha-Patchouli alcohol isomers were suggested as inhibitor of COX-1 and COX-2. Collectively, the scoring binding energy calculation (with PBSA Model Solvent) of alpha-Patchouli alcohol isomer compounds (CID442384, CID6432585, CID3080622, CID10955174, and CID56928117) was suggested as candidate for a selective COX-1 inhibitor and CID521903 as nonselective COX-1/COX-2. PMID:25484897

Origin and effect of Acetobacteraceae Alpha 2.2 in honey bee larvae and description of Parasaccharibacter apium, gen. nov., sp. nov

USDA-ARS?s Scientific Manuscript database

The honey bee hive environment contains a rich microbial community that differs according to niche. Acetobacteraceae Alpha 2.2 (Alpha 2.2) are present in the food stores, the forager crop, and larvae but at negligible levels in the remainder (non-crop portion) of the nurse and forager gut. We first ...

Nitrogen input inventory in the Nooksack-Fraser Transboundary Region: Key component of an international nitrogen management study

EPA Science Inventory

The Nooksack-Abbotsford-Sumas (NAS) Transboundary Watershed, spanning which spans a portion of the western interface of British Columbia, Washington State, and the Lummi Nation and the Nooksack Tribal lands , supports agriculture, estuarine fisheries, diverse wildlife, and urban ...

The Software Ontology (SWO): a resource for reproducibility in biomedical data analysis, curation and digital preservation.

PubMed

Malone, James; Brown, Andy; Lister, Allyson L; Ison, Jon; Hull, Duncan; Parkinson, Helen; Stevens, Robert

2014-01-01

Biomedical ontologists to date have concentrated on ontological descriptions of biomedical entities such as gene products and their attributes, phenotypes and so on. Recently, effort has diversified to descriptions of the laboratory investigations by which these entities were produced. However, much biological insight is gained from the analysis of the data produced from these investigations, and there is a lack of adequate descriptions of the wide range of software that are central to bioinformatics. We need to describe how data are analyzed for discovery, audit trails, provenance and reproducibility. The Software Ontology (SWO) is a description of software used to store, manage and analyze data. Input to the SWO has come from beyond the life sciences, but its main focus is the life sciences. We used agile techniques to gather input for the SWO and keep engagement with our users. The result is an ontology that meets the needs of a broad range of users by describing software, its information processing tasks, data inputs and outputs, data formats versions and so on. Recently, the SWO has incorporated EDAM, a vocabulary for describing data and related concepts in bioinformatics. The SWO is currently being used to describe software used in multiple biomedical applications. The SWO is another element of the biomedical ontology landscape that is necessary for the description of biomedical entities and how they were discovered. An ontology of software used to analyze data produced by investigations in the life sciences can be made in such a way that it covers the important features requested and prioritized by its users. The SWO thus fits into the landscape of biomedical ontologies and is produced using techniques designed to keep it in line with user's needs. The Software Ontology is available under an Apache 2.0 license at http://theswo.sourceforge.net/; the Software Ontology blog can be read at http://softwareontology.wordpress.com.

The Software Ontology (SWO): a resource for reproducibility in biomedical data analysis, curation and digital preservation

PubMed Central

2014-01-01

Motivation Biomedical ontologists to date have concentrated on ontological descriptions of biomedical entities such as gene products and their attributes, phenotypes and so on. Recently, effort has diversified to descriptions of the laboratory investigations by which these entities were produced. However, much biological insight is gained from the analysis of the data produced from these investigations, and there is a lack of adequate descriptions of the wide range of software that are central to bioinformatics. We need to describe how data are analyzed for discovery, audit trails, provenance and reproducibility. Results The Software Ontology (SWO) is a description of software used to store, manage and analyze data. Input to the SWO has come from beyond the life sciences, but its main focus is the life sciences. We used agile techniques to gather input for the SWO and keep engagement with our users. The result is an ontology that meets the needs of a broad range of users by describing software, its information processing tasks, data inputs and outputs, data formats versions and so on. Recently, the SWO has incorporated EDAM, a vocabulary for describing data and related concepts in bioinformatics. The SWO is currently being used to describe software used in multiple biomedical applications. Conclusion The SWO is another element of the biomedical ontology landscape that is necessary for the description of biomedical entities and how they were discovered. An ontology of software used to analyze data produced by investigations in the life sciences can be made in such a way that it covers the important features requested and prioritized by its users. The SWO thus fits into the landscape of biomedical ontologies and is produced using techniques designed to keep it in line with user’s needs. Availability The Software Ontology is available under an Apache 2.0 license at http://theswo.sourceforge.net/; the Software Ontology blog can be read at http://softwareontology.wordpress.com. PMID:25068035

Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0

DTIC Science & Technology

2008-11-05

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--08-9150 Approved for public release; distribution is unlimited. Software ...collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for...THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0 Pamela G

Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0

DTIC Science & Technology

2008-12-31

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--08-9149 Approved for public release; distribution is unlimited. Software ...suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for Information Operations and Reports (0704...LIMITATION OF ABSTRACT Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0 Paul Martin, Charlie N. Barron, Lucy F

I&W (Indications and Warning) Data Base Management Systems Analysis.

DTIC Science & Technology

1983-06-01

34 NUMBER ALPHA ACTOR NUMBER ALPHA ACTOR 1 7 MAC Macao N10 TAZ Tanzania5 AG Malagasy 00 TAI Thailand 5 MAW Malawi 461 TOG Togo 2 HAL Malaysia 052 TRI...independence ’ 040 Berlin conflict 050 Sino-Soviet conflicts S0 Indonesia- Malaysia disputes 00 India-China conflicts USA-China conflicts " 090 India...41, ..4- Table 13-6 Test Series Summary Descriptions (page 5 of 19) 13-8f . .. "*- I&W DBMS ANALYSIS TEST DESCRIPTION . Test ID: F6 ScenariG ____No

SEPAC flight software detailed design specifications, volume 1

NASA Technical Reports Server (NTRS)

1982-01-01

The detailed design specifications (as built) for the SEPAC Flight Software are defined. The design includes a description of the total software system and of each individual module within the system. The design specifications describe the decomposition of the software system into its major components. The system structure is expressed in the following forms: the control-flow hierarchy of the system, the data-flow structure of the system, the task hierarchy, the memory structure, and the software to hardware configuration mapping. The component design description includes details on the following elements: register conventions, module (subroutines) invocaton, module functions, interrupt servicing, data definitions, and database structure.

Objective Quality Control of Artillery Computer Meteorological Messages.

DTIC Science & Technology

1980-04-01

Veazey , 1977, Proposed AMS-A for Corps TACFIRE (PACT) System Description, ASL Internal Report, White Sands Missile Range, NM 6 1nclosure 1, "Software...R. Veazey , 1977, Proposed AMS-A for Corps TACFIRE (PACT) System Description, ASL Internal Report, Atmospheric Sciences Laboratory, White Sands Missile

Impact of parental relationships in maximum lod score affected sib-pair method.

PubMed

Leutenegger, Anne-Louise; Génin, Emmanuelle; Thompson, Elizabeth A; Clerget-Darpoux, Françoise

2002-11-01

Many studies are done in small isolated populations and populations where marriages between relatives are encouraged. In this paper, we point out some problems with applying the maximum lod score (MLS) method (Risch, [1990] Am. J. Hum. Genet. 46:242-253) in these populations where relationships exist between the two parents of the affected sib-pairs. Characterizing the parental relationships by the kinship coefficient between the parents (f), the maternal inbreeding coefficient (alpha(m), and the paternal inbreeding coefficient (alpha(p)), we explored the relationship between the identity by descent (IBD) vector expected under the null hypothesis of no linkage and these quantities. We find that the expected IBD vector is no longer (0.25, 0.5, 0.25) when f, alpha(m), and alpha(p) differ from zero. In addition, the expected IBD vector does not always follow the triangle constraints recommended by Holmans ([1993] Am. J. Hum. Genet. 52:362-374). So the classically used MLS statistic needs to be adapted to the presence of parental relationships. We modified the software GENEHUNTER (Kruglyak et al. [1996] Am. J. Hum. Genet. 58: 1347-1363) to do so. Indeed, the current version of the software does not compute the likelihood properly under the null hypothesis. We studied the adapted statistic by simulating data on three different family structures: (1) parents are double first cousins (f=0.125, alpha(m)=alpha(p)=0), (2) each parent is the offspring of first cousins (f=0, alpha(m)=alpha(p)=0.0625), and (3) parents are related as in the pedigree from Goddard et al. ([1996] Am. J. Hum. Genet. 58:1286-1302) (f=0.109, alpha(m)=alpha(p)=0.0625). The appropriate threshold needs to be derived for each case in order to get the correct type I error. And using the classical statistic in the presence of both parental kinship and parental inbreeding almost always leads to false conclusions. Copyright 2002 Wiley-Liss, Inc.

A parameterization of nuclear track profiles in CR-39 detector

NASA Astrophysics Data System (ADS)

Azooz, A. A.; Al-Nia'emi, S. H.; Al-Jubbori, M. A.

2012-11-01

In this work, the empirical parameterization describing the alpha particles’ track depth in CR-39 detectors is extended to describe longitudinal track profiles against etching time for protons and alpha particles. MATLAB based software is developed for this purpose. The software calculates and plots the depth, diameter, range, residual range, saturation time, and etch rate versus etching time. The software predictions are compared with other experimental data and with results of calculations using the original software, TRACK_TEST, developed for alpha track calculations. The software related to this work is freely downloadable and performs calculations for protons in addition to alpha particles. Program summary Program title: CR39 Catalog identifier: AENA_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AENA_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Copyright (c) 2011, Aasim Azooz Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met • Redistributions of source code must retain the above copyright, this list of conditions and the following disclaimer. • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution This software is provided by the copyright holders and contributors “as is” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the copyright owner or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage. No. of lines in distributed program, including test data, etc.: 15598 No. of bytes in distributed program, including test data, etc.: 3933244 Distribution format: tar.gz Programming language: MATLAB. Computer: Any Desktop or Laptop. Operating system: Windows 1998 or above (with MATLAB R13 or above installed). RAM: 512 Megabytes or higher Classification: 17.5. Nature of problem: A new semispherical parameterization of charged particle tracks in CR-39 SSNTD is carried out in a previous paper. This parameterization is developed here into a MATLAB based software to calculate the track length and track profile for any proton or alpha particle energy or etching time. This software is intended to compete with the TRACK_TEST [1] and TRACK_VISION [2] software currently in use by all people working in the field of SSNTD. Solution method: Based on fitting of experimental results of protons and alpha particles track lengths for various energies and etching times to a new semispherical formula with four free fitting parameters, the best set of energy independent parameters were found. These parameters are introduced into the software and the software is programmed to solve the set of equations to calculate the track depth, track etching rate as a function of both time and residual range for particles of normal and oblique incidence, the track longitudinal profile at both normal and oblique incidence, and the three dimensional track profile at normal incidence. Running time: 1-8 s on Pentium (4) 2 GHz CPU, 3 GB of RAM depending on the etching time value References: [1] ADWT_v1_0 Track_Test Computer program TRACK_TEST for calculating parameters and plotting profiles for etch pits in nuclear track materials. D. Nikezic, K.N. Yu Comput. Phys. Commun. 174(2006)160 [2] AEAF_v1_0 TRACK_VISION Computer program TRACK_VISION for simulating optical appearance of etched tracks in CR-39 nuclear track detectors. D. Nikezic, K.N. Yu Comput. Phys. Commun. 178(2008)591

A Direct Latent Variable Modeling Based Method for Point and Interval Estimation of Coefficient Alpha

ERIC Educational Resources Information Center

Raykov, Tenko; Marcoulides, George A.

2015-01-01

A direct approach to point and interval estimation of Cronbach's coefficient alpha for multiple component measuring instruments is outlined. The procedure is based on a latent variable modeling application with widely circulated software. As a by-product, using sample data the method permits ascertaining whether the population discrepancy…

UTM TCL 2.0 Software Version Description (SVD) Document

NASA Technical Reports Server (NTRS)

Mcguirk, Patrick

2017-01-01

This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release

Observations of red-giant variable stars by Aboriginal Australians

NASA Astrophysics Data System (ADS)

Hamacher, Duane W.

2018-04-01

Aboriginal Australians carefully observe the properties and positions of stars, including both overt and subtle changes in their brightness, for subsistence and social application. These observations are encoded in oral tradition. I examine two Aboriginal oral traditions from South Australia that describe the periodic changing brightness in three pulsating, red-giant variable stars: Betelgeuse (Alpha Orionis), Aldebaran (Alpha Tauri), and Antares (Alpha Scorpii). The Australian Aboriginal accounts stand as the only known descriptions of pulsating variable stars in any Indigenous oral tradition in the world. Researchers examining these oral traditions over the last century, including anthropologists and astronomers, missed the description of these stars as being variable in nature as the ethnographic record contained several misidentifications of stars and celestial objects. Arguably, ethnographers working on Indigenous Knowledge Systems should have academic training in both the natural and social sciences.

Wisconsin H-Alpha Mapper | UW-Madison Astronomy

Science.gov Websites

Department of Astronomy Wisconsin H-Alpha Mapper Overview Description About WHAM Fabry-Perot Spectroscopy National Science Foundation Astronomy and... 02.20.2012 | Continue Reading » WHAM featured at Natural Astronomy Galactic Structure GALFA GLIMPSE GLIMPSE360 WHAM Extragalactic Astronomy & Cosmology Local

Software engineering standards and practices

NASA Technical Reports Server (NTRS)

Durachka, R. W.

1981-01-01

Guidelines are presented for the preparation of a software development plan. The various phases of a software development project are discussed throughout its life cycle including a general description of the software engineering standards and practices to be followed during each phase.

Math Description Engine Software Development Kit

NASA Technical Reports Server (NTRS)

Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

2010-01-01

The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

Flight software requirements and design support system

NASA Technical Reports Server (NTRS)

Riddle, W. E.; Edwards, B.

1980-01-01

The desirability and feasibility of computer-augmented support for the pre-implementation activities occurring during the development of flight control software was investigated. The specific topics to be investigated were the capabilities to be included in a pre-implementation support system for flight control software system development, and the specification of a preliminary design for such a system. Further, the pre-implementation support system was to be characterized and specified under the constraints that it: (1) support both description and assessment of flight control software requirements definitions and design specification; (2) account for known software description and assessment techniques; (3) be compatible with existing and planned NASA flight control software development support system; and (4) does not impose, but may encourage, specific development technologies. An overview of the results is given.

76 FR 10825 - Federal Tort Claims Act (FTCA) Medical Malpractice Program Regulations: Clarification of FTCA...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-28

... Care, Health Resources and Services Administration, U.S. Department of Health and Human Services, 5600... INFORMATION CONTACT: Suma Nair, Director, Office of Quality and Data, Bureau of Primary Health Care, Health... current routine practice. List of Subjects in 42 CFR Part 6 Emergency medical services, Health care...

Nitrogen input inventory in the Nooksack-Abbotsford-Sumas Transboundary Region: Key component of an international nitrogen management study.

EPA Science Inventory

Background/Question/Methods: Nitrogen (N) is an essential biological element, so optimizing N use for food production while minimizing the release of N and co-pollutants to the environment is an important challenge. The Nooksack-lower Fraser Valley, spanning a portion of the w...

Comparison of soil sampling and analytical methods for asbestos at the Sumas Mountain Asbestos Site—Working towards a toolbox for better assessment

EPA Science Inventory

Established soil sampling methods for asbestos are inadequate to support risk assessment and risk-based decision making at Superfund sites due to difficulties in detecting asbestos at low concentrations and difficulty in extrapolating soil concentrations to air concentrations. En...

The AP Descriptive Chemistry Question: Student Errors

ERIC Educational Resources Information Center

Crippen, Kent; Brooks, David W.

2005-01-01

For over a decade, the authors have been involved in a design theory experiment providing software for high school students preparing for the descriptive question on the Advanced Placement (AP) chemistry examination. Since 1997, the software has been available as a Web site offering repeatable practice. This study describes a 4-year project during…

Robust Coefficients Alpha and Omega and Confidence Intervals With Outlying Observations and Missing Data: Methods and Software.

PubMed

Zhang, Zhiyong; Yuan, Ke-Hai

2016-06-01

Cronbach's coefficient alpha is a widely used reliability measure in social, behavioral, and education sciences. It is reported in nearly every study that involves measuring a construct through multiple items. With non-tau-equivalent items, McDonald's omega has been used as a popular alternative to alpha in the literature. Traditional estimation methods for alpha and omega often implicitly assume that data are complete and normally distributed. This study proposes robust procedures to estimate both alpha and omega as well as corresponding standard errors and confidence intervals from samples that may contain potential outlying observations and missing values. The influence of outlying observations and missing data on the estimates of alpha and omega is investigated through two simulation studies. Results show that the newly developed robust method yields substantially improved alpha and omega estimates as well as better coverage rates of confidence intervals than the conventional nonrobust method. An R package coefficientalpha is developed and demonstrated to obtain robust estimates of alpha and omega.

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 1: Introduction and user's guide

NASA Technical Reports Server (NTRS)

1983-01-01

Reporting software programs provide formatted listings and summary reports of the Software Engineering Laboratory (SEL) data base contents. The operating procedures and system information for 18 different reporting software programs are described. Sample output reports from each program are provided.

Open-source framework for documentation of scientific software written on MATLAB-compatible programming languages

NASA Astrophysics Data System (ADS)

Konnik, Mikhail V.; Welsh, James

2012-09-01

Numerical simulators for adaptive optics systems have become an essential tool for the research and development of the future advanced astronomical instruments. However, growing software code of the numerical simulator makes it difficult to continue to support the code itself. The problem of adequate documentation of the astronomical software for adaptive optics simulators may complicate the development since the documentation must contain up-to-date schemes and mathematical descriptions implemented in the software code. Although most modern programming environments like MATLAB or Octave have in-built documentation abilities, they are often insufficient for the description of a typical adaptive optics simulator code. This paper describes a general cross-platform framework for the documentation of scientific software using open-source tools such as LATEX, mercurial, Doxygen, and Perl. Using the Perl script that translates M-files MATLAB comments into C-like, one can use Doxygen to generate and update the documentation for the scientific source code. The documentation generated by this framework contains the current code description with mathematical formulas, images, and bibliographical references. A detailed description of the framework components is presented as well as the guidelines for the framework deployment. Examples of the code documentation for the scripts and functions of a MATLAB-based adaptive optics simulator are provided.

Urinary arsenic species, toenail arsenic, and arsenic intake estimates in a Michigan population with low levels of arsenic in drinking water.

PubMed

Rivera-Núñez, Zorimar; Meliker, Jaymie R; Meeker, John D; Slotnick, Melissa J; Nriagu, Jerome O

2012-01-01

The large disparity between arsenic concentrations in drinking water and urine remains unexplained. This study aims to evaluate predictors of urinary arsenic in a population exposed to low concentrations (≤50 μg/l) of arsenic in drinking water. Urine and drinking water samples were collected from a subsample (n=343) of a population enrolled in a bladder cancer case-control study in southeastern Michigan. Total arsenic in water and arsenic species in urine were determined using ICP-MS: arsenobetaine (AsB), arsenite (As[III]), arsenate (As[V]), methylarsenic acid (MMA[V]), and dimethylarsenic acid (DMA[V]). The sum of As[III], As[V], MMA[V], and DMA[V] was denoted as SumAs. Dietary information was obtained through a self-reported food intake questionnaire. Log(10)-transformed drinking water arsenic concentration at home was a significant (P<0.0001) predictor of SumAs (R(2)=0.18). Associations improved (R(2)=0.29, P<0.0001) when individuals with less than 1 μg/l of arsenic in drinking water were removed and further improved when analyses were applied to individuals who consumed amounts of home drinking water above the median volume (R(2)=0.40, P<0.0001). A separate analysis indicated that AsB and DMA[V] were significantly correlated with fish and shellfish consumption, which may suggest that seafood intake influences DMA[V] excretion. The Spearman correlation between arsenic concentration in toenails and SumAs was 0.36 and between arsenic concentration in toenails and arsenic concentration in water was 0.42. Results show that arsenic exposure from drinking water consumption is an important determinant of urinary arsenic concentrations, even in a population exposed to relatively low levels of arsenic in drinking water, and suggest that seafood intake may influence urinary DMA[V] concentrations.

Sexual behavioral abstine HIV/AIDS questionnaire: Validation study of an Iranian questionnaire.

PubMed

Najarkolaei, Fatemeh Rahmati; Niknami, Shamsaddin; Shokravi, Farkhondeh Amin; Tavafian, Sedigheh Sadat; Fesharaki, Mohammad Gholami; Jafari, Mohammad Reza

2014-01-01

This study was designed to assess the validity and reliability of the designed sexual, behavioral abstinence, and avoidance of high-risk situation questionnaire (SBAHAQ), with an aim to construct an appropriate development tool in the Iranian population. A descriptive-analytic study was conducted among female undergraduate students of Tehran University, who were selected through cluster random sampling. After reviewing the questionnaires and investigating face and content validity, internal consistency of the questionnaire was assessed by Cronbach's alpha. Explanatory and confirmatory factor analysis was conducted using SPSS and AMOS 16 Software, respectively. The sample consisted of 348 female university students with a mean age of 20.69 ± 1.63 years. The content validity ratio (CVR) coefficient was 0.85 and the reliability of each section of the questionnaire was as follows: Perceived benefit (PB; 0.87), behavioral intention (BI; 0.77), and self-efficacy (SE; 0.85) (Cronbach's alpha totally was 0.83). Explanatory factor analysis showed three factors, including SE, PB, and BI, with the total variance of 61% and Kaiser-Meyer-Olkin (KMO) index of 88%. These factors were also confirmed by confirmatory factor analysis [adjusted goodness of fitness index (AGFI) = 0.939, root mean square error of approximation (RMSEA) = 0.039]. This study showed the designed questionnaire provided adequate construct validity and reliability, and could be adequately used to measure sexual abstinence and avoidance of high-risk situations among female students.

Multiphysics phase field modeling of hydrogen diffusion and delta-hydride precipitation in alpha-zirconium

NASA Astrophysics Data System (ADS)

Jokisaari, Andrea M.

Hydride precipitation in zirconium is a significant factor limiting the lifetime of nuclear fuel cladding, because hydride microstructures play a key role in the degradation of fuel cladding. However, the behavior of hydrogen in zirconium has typically been modeled using mean field approaches, which do not consider microstructural evolution. This thesis describes a quantitative microstructural evolution model for the alpha-zirconium/delta-hydride system and the associated numerical methods and algorithms that were developed. The multiphysics, phase field-based model incorporates CALPHAD free energy descriptions, linear elastic solid mechanics, and classical nucleation theory. A flexible simulation software implementing the model, Hyrax, is built on the Multiphysics Object Oriented Simulation Environment (MOOSE) finite element framework. Hyrax is open-source and freely available; moreover, the numerical methods and algorithms that have been developed are generalizable to other systems. The algorithms are described in detail, and verification studies for each are discussed. In addition, analyses of the sensitivity of the simulation results to the choice of numerical parameters are presented. For example, threshold values for the CALPHAD free energy algorithm and the use of mesh and time adaptivity when employing the nucleation algorithm are studied. Furthermore, preliminary insights into the nucleation behavior of delta-hydrides are described. These include a) the sensitivities of the nucleation rate to temperature, interfacial energy, composition and elastic energy, b) the spatial variation of the nucleation rate around a single precipitate, and c) the effect of interfacial energy and nucleation rate on the precipitate microstructure. Finally, several avenues for future work are discussed. Topics encompass the terminal solid solubility hysteresis of hydrogen in zirconium and the effects of the alpha/delta interfacial energy, as well as thermodiffusion, plasticity, and irradiation, which are not yet accounted for in the model.

AUTOMATED LITERATURE PROCESSING HANDLING AND ANALYSIS SYSTEM--FIRST GENERATION.

ERIC Educational Resources Information Center

Redstone Scientific Information Center, Redstone Arsenal, AL.

THE REPORT PRESENTS A SUMMARY OF THE DEVELOPMENT AND THE CHARACTERISTICS OF THE FIRST GENERATION OF THE AUTOMATED LITERATURE PROCESSING, HANDLING AND ANALYSIS (ALPHA-1) SYSTEM. DESCRIPTIONS OF THE COMPUTER TECHNOLOGY OF ALPHA-1 AND THE USE OF THIS AUTOMATED LIBRARY TECHNIQUE ARE PRESENTED. EACH OF THE SUBSYSTEMS AND MODULES NOW IN OPERATION ARE…

Higher theta and alpha1 coherence when listening to Vedic recitation compared to coherence during Transcendental Meditation practice.

PubMed

Travis, Frederick; Parim, Niyazi; Shrivastava, Amrita

2017-03-01

This study compared subjective experiences and EEG patterns in 37 subjects when listening to live Vedic recitation and when practicing Transcendental Meditation (TM). Content analysis of experiences when listening to Vedic recitation yielded three higher-order code. Experiences during Vedic recitation were: (1) deeper than during TM practice; (2) experienced as an inner process; and (3) characterized by lively silence. EEG patterns support these higher-order codes. Theta2 and alpha1 frontal, parietal, and frontal-parietal coherence were significantly higher when listening to Vedic recitation, than during TM practice. Theta2 coherence is seen when attending to internal mental processes. Higher theta2 coherence supports subjects' descriptions that the Vedic recitations were "not external sounds but internal vibrations." Alpha1 coherence is reported during pure consciousness experiences during TM practice. Higher alpha1 coherence supports subjects' descriptions that they "experienced a depth of experience, rarely experienced even during deep TM practice." These data support the utility of listening to Vedic recitation to culture deep inner experiences. Copyright © 2017 Elsevier Inc. All rights reserved.

Software Descriptions. Micro-computers: Atari, Apple, PET, TRS-80.

ERIC Educational Resources Information Center

Olivero, James L.

Each of the more than 200 educational software programs developed by both commercial and public domain sources which are described is intended for use with one of the four microcomputers most frequently used for instructional purposes--Atari, Apple, PET, and TRS-80. These descriptions are offered as a service for those who are just beginning to…

Sigma 2 Graphic Display Software Program Description

NASA Technical Reports Server (NTRS)

Johnson, B. T.

1973-01-01

A general purpose, user oriented graphic support package was implemented. A comprehensive description of the two software components comprising this package is given: Display Librarian and Display Controller. These programs have been implemented in FORTRAN on the XDS Sigma 2 Computer Facility. This facility consists of an XDS Sigma 2 general purpose computer coupled to a Computek Display Terminal.

Domain Engineering

NASA Astrophysics Data System (ADS)

Bjørner, Dines

Before software can be designed we must know its requirements. Before requirements can be expressed we must understand the domain. So it follows, from our dogma, that we must first establish precise descriptions of domains; then, from such descriptions, “derive” at least domain and interface requirements; and from those and machine requirements design the software, or, more generally, the computing systems.

Advanced Transport Operating System (ATOPS) color displays software description microprocessor system

NASA Technical Reports Server (NTRS)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

Path generation algorithm for UML graphic modeling of aerospace test software

NASA Astrophysics Data System (ADS)

Qu, MingCheng; Wu, XiangHu; Tao, YongChao; Chen, Chao

2018-03-01

Aerospace traditional software testing engineers are based on their own work experience and communication with software development personnel to complete the description of the test software, manual writing test cases, time-consuming, inefficient, loopholes and more. Using the high reliability MBT tools developed by our company, the one-time modeling can automatically generate test case documents, which is efficient and accurate. UML model to describe the process accurately express the need to rely on the path is reached, the existing path generation algorithm are too simple, cannot be combined into a path and branch path with loop, or too cumbersome, too complicated arrangement generates a path is meaningless, for aerospace software testing is superfluous, I rely on our experience of ten load space, tailor developed a description of aerospace software UML graphics path generation algorithm.

Our turbulent Sun

NASA Astrophysics Data System (ADS)

Smith, K.

2003-12-01

Sunspots in H-alpha. Image taken at the Equinox Star Camp at Thetford on 2002 September 12 by Kevin Smith. Equipment used was a Daystar 0.7ATM H-alpha filter on a Takahashi FS128, and a Televue x4 Powermate. The image was made using a Basler digital camera with Aquinto A4I Docu software. Slight adjustments to highlight surface detail were made with Adobe Photoshop.

49 CFR 572.141 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-year-Old Child Crash Test Dummy, Alpha Version § 572.141 General description. (a) The Hybrid III 3-year-old child dummy is described by the following materials: (1) Technical drawings and specifications package 210-0000 (refer to...

Responses of Fischer Rats to Intratracheal Instillations of PM2.5 Samples of Libby Amphibole (LA), Sumas Mountain Chrysotile, EI Dorado Tremolite, and Ontario Actinolite.

EPA Science Inventory

To support risk assessment efforts, a comparative intratracheal instillation (IT) study is being conducted to provide mechanistic understanding of the toxicity of different types of fibers encountered in EPA clean-up efforts. While other types of asbestos have been shown to cause...

Higher Education Reform in India: Experience and Perspectives.

ERIC Educational Resources Information Center

Chitnis, Suma, Ed.; Altbach, Philip G., Ed.

This collection of six essays and six case studies analyzes efforts at reform and the changes that have taken place in Indian higher education over the past four decades. The six essays describe several innovative and interesting programs and analyze key policy areas. After an introduction by Philip G. Altbach and Suma Chitnis, titles include: (1)…

Cataloging and Organizing Microcomputer Software--Where Do We Go from First Base?

ERIC Educational Resources Information Center

Choi, Susan E.

This position paper addresses general topics to be considered when organizing library software collections. Tasks involved in organizing and cataloging educational software collections are discussed, including arrangement/classification; the type of catalog; descriptions of the software; the general materials designator; storage requirements; and…

Expert systems applied to fault isolation and energy storage management, phase 2

NASA Technical Reports Server (NTRS)

1987-01-01

A user's guide for the Fault Isolation and Energy Storage (FIES) II system is provided. Included are a brief discussion of the background and scope of this project, a discussion of basic and advanced operating installation and problem determination procedures for the FIES II system and information on hardware and software design and implementation. A number of appendices are provided including a detailed specification for the microprocessor software, a detailed description of the expert system rule base and a description and listings of the LISP interface software.

An object-oriented description method of EPMM process

NASA Astrophysics Data System (ADS)

Jiang, Zuo; Yang, Fan

2017-06-01

In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

Airborne Intelligent Display (AID) Phase I Software Description,

DTIC Science & Technology

1983-10-24

Board Computer Characteristics 10 3.0 SOFTWARE GENERAL DESCRIPTION 13 3.1 Overview 13 3.2 System Software 14 3.2.1 System Startup 14 3.2.1.1 Initial...3 A-2 Task States A-4 A-3 Task Program Structure A-6 A-4 Task States and State Change Mechanisms A-7 A-5 Computing Return Addresses: RUNADR, SLPADR A...techniques. 2.2 Design Approach The stated objectives were met by: 1. distributing the processing load among multiple Z80 single-board computers (SBC’s). This

A learning apprentice for software parts composition

NASA Technical Reports Server (NTRS)

Allen, Bradley P.; Holtzman, Peter L.

1987-01-01

An overview of the knowledge acquisition component of the Bauhaus, a prototype computer aided software engineering (CASE) workstation for the development of domain-specific automatic programming systems (D-SAPS) is given. D-SAPS use domain knowledge in the refinement of a description of an application program into a compilable implementation. The approach to the construction of D-SAPS was to automate the process of refining a description of a program, expressed in an object-oriented domain language, into a configuration of software parts that implement the behavior of the domain objects.

The Implications of Using Integrated Software Support Environment for Design of Guidance and Control Systems Software

DTIC Science & Technology

1990-02-01

inspections are performed before each formal review of each software life cycle phase. * Required software audits are performed . " The software is acceptable... Audits : Software audits are performed bySQA consistent with thegeneral audit rules and an auditreportis prepared. Software Quality Inspection (SQI...DSD Software Development Method 3-34 DEFINITION OF ACRONYMS Acronym Full Name or Description MACH Methode d’Analyse et de Conception Flierarchisee

Description of alpha-nucleus interaction cross sections for cosmic ray shielding studies

NASA Technical Reports Server (NTRS)

Cucinotta, Francis A.; Townsend, Lawrence W.; Wilson, John W.

1993-01-01

Nuclear interactions of high-energy alpha particles with target nuclei important for cosmic ray studies are discussed. Models for elastic, quasi-elastic, and breakup reactions are presented and compared with experimental data. Energy-dependent interaction cross sections and secondary spectra are presented based on theoretical models and the limited experimental data base.

Advanced Transport Operating System (ATOPS) Flight Management/Flight Controls (FM/FC) software description

NASA Technical Reports Server (NTRS)

Wolverton, David A.; Dickson, Richard W.; Clinedinst, Winston C.; Slominski, Christopher J.

1993-01-01

The flight software developed for the Flight Management/Flight Controls (FM/FC) MicroVAX computer used on the Transport Systems Research Vehicle for Advanced Transport Operating Systems (ATOPS) research is described. The FM/FC software computes navigation position estimates, guidance commands, and those commands issued to the control surfaces to direct the aircraft in flight. Various modes of flight are provided for, ranging from computer assisted manual modes to fully automatic modes including automatic landing. A high-level system overview as well as a description of each software module comprising the system is provided. Digital systems diagrams are included for each major flight control component and selected flight management functions.

The relationship between cultural intelligence and social compatibility in Isfahan University of Medical Sciences dormitories resident students

PubMed Central

Keyvanara, Mahmoud; Yarmohammadian, Mohammad Hossein; Soltani, Batoul

2014-01-01

Introduction: Cultural intelligence and social compatibility are two acquired processes that their education and reinforcement between dormitory's students who have inter cultural interactions with each other can conclude with results that tension diminution, inter cultural contrast and conflict, social divisions and consequently healthy and peaceful relationships and governance and finally mental peace, and health are of its most important. Hence, the research has been occurring in order to the determination of cultural intelligence relationship with the social compatibility of Isfahan University of Medical Sciences dormitories resident students in 2012. Materials and Methods: The research method is descriptive-correlation, and its population is composed of all Isfahan University of Medical Sciences dormitories resident students in 2012 that were totally 2500 persons. The two steps sampling method have been used, group sampling and random sampling has been occurring at first and second steps and totally 447 persons were selected. Research data were collected via Earley and Ang cultural intelligence questionnaire with 0.76 Cronbach's alpha Coefficient and California social compatibility standard questionnaire with higher than 0.70 Cronbach's alpha factor. Questionnaire data have been analyzed with the SPSS software and results have been presented in the shape of descriptions and statistics. Findings: Results showed that there is a direct significant relationship (P < 0.001) between cultural intelligence and the social adjustment in students living in Isfahan University of Medical Sciences dormitories and also there is a direct significant relationship in the level of (P < 0.05) between cognitive and motivational dimensions of cultural intelligence; however, there is no significant relationship between cognitive and behavioral dimensions of cultural intelligence and social adjustment (P > 0.05). Conclusion: Cultural intelligence and cognitive and motivational addition in dimensions of students living in Isfahan University of Medical Sciences dormitories increase their social integration, therefore, cultural intelligence and social adjustment of students can be increased through planning and we can try for their mental health by this way. PMID:25250366

Advanced Transport Operating System (ATOPS) color displays software description: MicroVAX system

NASA Technical Reports Server (NTRS)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Display MicroVAX computer used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery of February 27, 1991, known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global references section includes subroutines, functions, and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight Cathode Ray Tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

Reproducible computational biology experiments with SED-ML--the Simulation Experiment Description Markup Language.

PubMed

Waltemath, Dagmar; Adams, Richard; Bergmann, Frank T; Hucka, Michael; Kolpakov, Fedor; Miller, Andrew K; Moraru, Ion I; Nickerson, David; Sahle, Sven; Snoep, Jacky L; Le Novère, Nicolas

2011-12-15

The increasing use of computational simulation experiments to inform modern biological research creates new challenges to annotate, archive, share and reproduce such experiments. The recently published Minimum Information About a Simulation Experiment (MIASE) proposes a minimal set of information that should be provided to allow the reproduction of simulation experiments among users and software tools. In this article, we present the Simulation Experiment Description Markup Language (SED-ML). SED-ML encodes in a computer-readable exchange format the information required by MIASE to enable reproduction of simulation experiments. It has been developed as a community project and it is defined in a detailed technical specification and additionally provides an XML schema. The version of SED-ML described in this publication is Level 1 Version 1. It covers the description of the most frequent type of simulation experiments in the area, namely time course simulations. SED-ML documents specify which models to use in an experiment, modifications to apply on the models before using them, which simulation procedures to run on each model, what analysis results to output, and how the results should be presented. These descriptions are independent of the underlying model implementation. SED-ML is a software-independent format for encoding the description of simulation experiments; it is not specific to particular simulation tools. Here, we demonstrate that with the growing software support for SED-ML we can effectively exchange executable simulation descriptions. With SED-ML, software can exchange simulation experiment descriptions, enabling the validation and reuse of simulation experiments in different tools. Authors of papers reporting simulation experiments can make their simulation protocols available for other scientists to reproduce the results. Because SED-ML is agnostic about exact modeling language(s) used, experiments covering models from different fields of research can be accurately described and combined.

Development of fuel oil management system software: Phase 1, Tank management module. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lange, H.B.; Baker, J.P.; Allen, D.

1992-01-01

The Fuel Oil Management System (FOMS) is a micro-computer based software system being developed to assist electric utilities that use residual fuel oils with oil purchase and end-use decisions. The Tank Management Module (TMM) is the first FOMS module to be produced. TMM enables the user to follow the mixing status of oils contained in a number of oil storage tanks. The software contains a computational model of residual fuel oil mixing which addresses mixing that occurs as one oil is added to another in a storage tank and also purposeful mixing of the tank by propellers, recirculation or convection.Themore » model also addresses the potential for sludge formation due to incompatibility of oils being mixed. Part 1 of the report presents a technical description of the mixing model and a description of its development. Steps followed in developing the mixing model included: (1) definition of ranges of oil properties and tank design factors used by utilities; (2) review and adaption of prior applicable work; (3) laboratory development; and (4) field verification. Also, a brief laboratory program was devoted to exploring the suitability of suggested methods for predicting viscosities, flash points and pour points of oil mixtures. Part 2 of the report presents a functional description of the TMM software and a description of its development. The software development program consisted of the following steps: (1) on-site interviews at utilities to prioritize needs and characterize user environments; (2) construction of the user interface; and (3) field testing the software.« less

Development of fuel oil management system software: Phase 1, Tank management module

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lange, H.B.; Baker, J.P.; Allen, D.

1992-01-01

The Fuel Oil Management System (FOMS) is a micro-computer based software system being developed to assist electric utilities that use residual fuel oils with oil purchase and end-use decisions. The Tank Management Module (TMM) is the first FOMS module to be produced. TMM enables the user to follow the mixing status of oils contained in a number of oil storage tanks. The software contains a computational model of residual fuel oil mixing which addresses mixing that occurs as one oil is added to another in a storage tank and also purposeful mixing of the tank by propellers, recirculation or convection.Themore » model also addresses the potential for sludge formation due to incompatibility of oils being mixed. Part 1 of the report presents a technical description of the mixing model and a description of its development. Steps followed in developing the mixing model included: (1) definition of ranges of oil properties and tank design factors used by utilities; (2) review and adaption of prior applicable work; (3) laboratory development; and (4) field verification. Also, a brief laboratory program was devoted to exploring the suitability of suggested methods for predicting viscosities, flash points and pour points of oil mixtures. Part 2 of the report presents a functional description of the TMM software and a description of its development. The software development program consisted of the following steps: (1) on-site interviews at utilities to prioritize needs and characterize user environments; (2) construction of the user interface; and (3) field testing the software.« less

{alpha}+{alpha} scattering reexamined in the context of the Sao Paulo potential

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chamon, L. C.; Gasques, L. R.; Carlson, B. V.

2011-03-15

We have analyzed a large set of {alpha}+{alpha} elastic scattering data for bombarding energies ranging from 0.6 to 29.5 MeV. Because of the complete lack of open reaction channels, the optical interaction at these energies must have a vanishing imaginary part. Thus, this system is particularly important because the corresponding elastic scattering cross sections are very sensitive to the real part of the interaction. The data were analyzed in the context of the velocity-dependent Sao Paulo potential, which is a successful theoretical model for the description of heavy-ion reactions from sub-barrier to intermediate energies. We have verified that, even inmore » this low-energy region, the velocity dependence of the model is quite important for describing the data of the {alpha}+{alpha} system.« less

Quality Attributes for Mission Flight Software: A Reference for Architects

NASA Technical Reports Server (NTRS)

Wilmot, Jonathan; Fesq, Lorraine; Dvorak, Dan

2016-01-01

In the international standards for architecture descriptions in systems and software engineering (ISO/IEC/IEEE 42010), "concern" is a primary concept that often manifests itself in relation to the quality attributes or "ilities" that a system is expected to exhibit - qualities such as reliability, security and modifiability. One of the main uses of an architecture description is to serve as a basis for analyzing how well the architecture achieves its quality attributes, and that requires architects to be as precise as possible about what they mean in claiming, for example, that an architecture supports "modifiability." This paper describes a table, generated by NASA's Software Architecture Review Board, which lists fourteen key quality attributes, identifies different important aspects of each quality attribute and considers each aspect in terms of requirements, rationale, evidence, and tactics to achieve the aspect. This quality attribute table is intended to serve as a guide to software architects, software developers, and software architecture reviewers in the domain of mission-critical real-time embedded systems, such as space mission flight software.

Software Reviews.

ERIC Educational Resources Information Center

Wulfson, Stephen

1988-01-01

Presents reviews of six computer software programs for teaching science. Provides the publisher, grade level, cost, and descriptions of software, including: (1) "Recycling Logic"; (2) "Introduction to Biochemistry"; (3) "Food for Thought"; (4) "Watts in a Home"; (5) "Geology in Action"; and (6)…

Reuse at the Software Productivity Consortium

NASA Technical Reports Server (NTRS)

Weiss, David M.

1989-01-01

The Software Productivity Consortium is sponsored by 14 aerospace companies as a developer of software engineering methods and tools. Software reuse and prototyping are currently the major emphasis areas. The Methodology and Measurement Project in the Software Technology Exploration Division has developed some concepts for reuse which they intend to develop into a synthesis process. They have identified two approaches to software reuse: opportunistic and systematic. The assumptions underlying the systematic approach, phrased as hypotheses, are the following: the redevelopment hypothesis, i.e., software developers solve the same problems repeatedly; the oracle hypothesis, i.e., developers are able to predict variations from one redevelopment to others; and the organizational hypothesis, i.e., software must be organized according to behavior and structure to take advantage of the predictions that the developers make. The conceptual basis for reuse includes: program families, information hiding, abstract interfaces, uses and information hiding hierarchies, and process structure. The primary reusable software characteristics are black-box descriptions, structural descriptions, and composition and decomposition based on program families. Automated support can be provided for systematic reuse, and the Consortium is developing a prototype reuse library and guidebook. The software synthesis process that the Consortium is aiming toward includes modeling, refinement, prototyping, reuse, assessment, and new construction.

Las Matematicas: Lenguaje Universal. Nivel 2a: Suma y Resta de Numeros Enteros (Mathematics: A Universal Language. Level 2a: Addition and Subtraction of Whole Numbers).

ERIC Educational Resources Information Center

Dissemination and Assessment Center for Bilingual Education, Austin, TX.

This is one of a series of student booklets designed for use in a bilingual mathematics program in grades 6-8. The general format is to present each page in both Spanish and English. The mathematical topics in this booklet include addition and subtraction. (MK)

76 FR 16785 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... Software Developers on the Technical Specifications for Common Formats for Patient Safety Data Collection... designed as an interactive forum where PSOs and software developers can provide input on these technical... updated event descriptions, forms, and technical specifications for software developers. As an update to...

The Organization of a Computer Software Collection Using an Information Storage and Retrieval Software Package.

ERIC Educational Resources Information Center

Davies, Denise M.

1985-01-01

Discusses design, development, and use of a database to provide organization and access to a computer software collection at the University of Hawaii School of Library Studies. Field specifications, samples of report forms, and a description of the physical organization of the software collection are included. (MBR)

Software Geometry in Simulations

NASA Astrophysics Data System (ADS)

Alion, Tyler; Viren, Brett; Junk, Tom

2015-04-01

The Long Baseline Neutrino Experiment (LBNE) involves many detectors. The experiment's near detector (ND) facility, may ultimately involve several detectors. The far detector (FD) will be significantly larger than any other Liquid Argon (LAr) detector yet constructed; many prototype detectors are being constructed and studied to motivate a plethora of proposed FD designs. Whether it be a constructed prototype or a proposed ND/FD design, every design must be simulated and analyzed. This presents a considerable challenge to LBNE software experts; each detector geometry must be described to the simulation software in an efficient way which allows for multiple authors to easily collaborate. Furthermore, different geometry versions must be tracked throughout their use. We present a framework called General Geometry Description (GGD), written and developed by LBNE software collaborators for managing software to generate geometries. Though GGD is flexible enough to be used by any experiment working with detectors, we present it's first use in generating Geometry Description Markup Language (GDML) files to interface with LArSoft, a framework of detector simulations, event reconstruction, and data analyses written for all LAr technology users at Fermilab. Brett is the other of the framework discussed here, the General Geometry Description (GGD).

Parameterized hardware description as object oriented hardware model implementation

NASA Astrophysics Data System (ADS)

Drabik, Pawel K.

2010-09-01

The paper introduces novel model for design, visualization and management of complex, highly adaptive hardware systems. The model settles component oriented environment for both hardware modules and software application. It is developed on parameterized hardware description research. Establishment of stable link between hardware and software, as a purpose of designed and realized work, is presented. Novel programming framework model for the environment, named Graphic-Functional-Components is presented. The purpose of the paper is to present object oriented hardware modeling with mentioned features. Possible model implementation in FPGA chips and its management by object oriented software in Java is described.

LiveDescribe: Can Amateur Describers Create High-Quality Audio Description?

ERIC Educational Resources Information Center

Branje, Carmen J.; Fels, Deborah I.

2012-01-01

Introduction: The study presented here evaluated the usability of the audio description software LiveDescribe and explored the acceptance rates of audio description created by amateur describers who used LiveDescribe to facilitate the creation of their descriptions. Methods: Twelve amateur describers with little or no previous experience with…

Trajectory Software With Upper Atmosphere Model

NASA Technical Reports Server (NTRS)

Barrett, Charles

2012-01-01

The Trajectory Software Applications 6.0 for the Dec Alpha platform has an implementation of the Jacchia-Lineberry Upper Atmosphere Density Model used in the Mission Control Center for International Space Station support. Previous trajectory software required an upper atmosphere to support atmosphere drag calculations in the Mission Control Center. The Functional operation will differ depending on the end-use of the module. In general, the calling routine will use function-calling arguments to specify input to the processor. The atmosphere model will then compute and return atmospheric density at the time of interest.

PREVAIL-EPL alpha tool electron optics subsystem

NASA Astrophysics Data System (ADS)

Pfeiffer, Hans C.; Dhaliwal, Rajinder S.; Golladay, Steven D.; Doran, Samuel K.; Gordon, Michael S.; Kendall, Rodney A.; Lieberman, Jon E.; Pinckney, David J.; Quickle, Robert J.; Robinson, Christopher F.; Rockrohr, James D.; Stickel, Werner; Tressler, Eileen V.

2001-08-01

The IBM/Nikon alliance is continuing pursuit of an EPL stepper alpha tool based on the PREVAIL technology. This paper provides a status report of the alliance activity with particular focus on the Electron Optical Subsystem developed at IBM. We have previously reported on design features of the PREVAIL alpha system. The new state-of-the-art e-beam lithography concepts have since been reduced to practice and turned into functional building blocks of a production level lithography tool. The electron optical alpha tool subsystem has been designed, build, assembled and tested at IBM's Semiconductor Research and Development Center (SRDC) in East Fishkill, New York. After demonstrating subsystem functionality, the electron optical column and all associated control electronics hardware and software have been shipped during January 2001 to Nikon's facility in Kumagaya, Japan, for integration into the Nikon commercial e-beam stepper alpha tool. Early pre-shipment results obtained with this electron optical subsystem are presented.

Complexity Measure for the Prototype System Description Language (PSDL)

DTIC Science & Technology

2002-06-01

Albrecht, A. and Gaffney , J., Software Function Source Lines of Code and Development Effort Prediction, IEEE Transactions on Software Engineering...Through Meausrement”; Proceedings of the IEEE, Vol. 77, No. 4, April 89. Schach, Stephen, R., Software Engineering, Second Edition, IRWIN, Burr Ridge

Fault tolerant software modules for SIFT

NASA Technical Reports Server (NTRS)

Hecht, M.; Hecht, H.

1982-01-01

The implementation of software fault tolerance is investigated for critical modules of the Software Implemented Fault Tolerance (SIFT) operating system to support the computational and reliability requirements of advanced fly by wire transport aircraft. Fault tolerant designs generated for the error reported and global executive are examined. A description of the alternate routines, implementation requirements, and software validation are included.

R-189 (C-620) air compressor control logic software documentation. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walter, K.E.

1995-06-08

This relates to FFTF plant air compressors. Purpose of this document is to provide an updated Computer Software Description for the software to be used on R-189 (C-620-C) air compressor programmable controllers. Logic software design changes were required to allow automatic starting of a compressor that had not been previously started.

COTS-based OO-component approach for software inter-operability and reuse (software systems engineering methodology)

NASA Technical Reports Server (NTRS)

Yin, J.; Oyaki, A.; Hwang, C.; Hung, C.

2000-01-01

The purpose of this research and study paper is to provide a summary description and results of rapid development accomplishments at NASA/JPL in the area of advanced distributed computing technology using a Commercial-Off--The-Shelf (COTS)-based object oriented component approach to open inter-operable software development and software reuse.

SIRU utilization. Volume 2: Software description and program documentation

NASA Technical Reports Server (NTRS)

Oehrle, J.; Whittredge, R.

1973-01-01

A complete description of the additional analysis, development and evaluation provided for the SIRU system as identified in the requirements for the SIRU utilization program is presented. The SIRU configuration is a modular inertial subsystem with hardware and software features that achieve fault tolerant operational capabilities. The SIRU redundant hardware design is formulated about a six gyro and six accelerometer instrument module package. The modules are mounted in this package so that their measurement input axes form a unique symmetrical pattern that corresponds to the array of perpendiculars to the faces of a regular dodecahedron. This six axes array provides redundant independent sensing and the symmetry enables the formulation of an optimal software redundant data processing structure with self-contained fault detection and isolation (FDI) capabilities. Documentation of the additional software and software modifications required to implement the utilization capabilities includes assembly listings and flow charts

ATM Technology Demonstration-1 Phase II Boeing Configurable Graphical Display (CGD) Software Design Description

NASA Technical Reports Server (NTRS)

Wilber, George F.

2017-01-01

This Software Description Document (SDD) captures the design for developing the Flight Interval Management (FIM) system Configurable Graphics Display (CGD) software. Specifically this SDD describes aspects of the Boeing CGD software and the surrounding context and interfaces. It does not describe the Honeywell components of the CGD system. The SDD provides the system overview, architectural design, and detailed design with all the necessary information to implement the Boeing components of the CGD software and integrate them into the CGD subsystem within the larger FIM system. Overall system and CGD system-level requirements are derived from the CGD SRS (in turn derived from the Boeing System Requirements Design Document (SRDD)). Display and look-and-feel requirements are derived from Human Machine Interface (HMI) design documents and working group recommendations. This Boeing CGD SDD is required to support the upcoming Critical Design Review (CDR).

Software for an experimental air-ground data link : volume 1. functional description and flowcharts.

DOT National Transportation Integrated Search

1975-10-01

This report documents the complete software system developed for the Experimental Data Link System which was implementd for flight test during the Air-Ground Data Link Development Program. The software development is presented in three volumes as fol...

Mathematical and Statistical Software Index. Final Report.

ERIC Educational Resources Information Center

Black, Doris E., Comp.

Brief descriptions are provided of general-purpose mathematical and statistical software, including 27 "stand-alone" programs, three subroutine systems, and two nationally recognized statistical packages, which are available in the Air Force Human Resources Laboratory (AFHRL) software library. This index was created to enable researchers…

Summary of paper: Area navigation implementation for a microcomputer-based Loran-C receiver

NASA Technical Reports Server (NTRS)

Oguri, Fujiko

1987-01-01

The development of an area navigation program and the implementation of this software on a microcomputer-based Loran-C receiver to provide high-quality, practical area navigation information for general aviation are described. This software provides range and bearing angle to a selected waypoint, cross-track error, course deviation indication (CDI), ground speed, and estimated time of arrival at the waypoint. The range/bearing calculation, using an elliptical Earth model, provides very good accuracy; the error does not exceed more than -.012 nm (range) or 0.09 degree (bearing) for a maximum range to 530 nm. The alpha-beta filtering is applied in order to reduce the random noise on Loran-C raw data and in the ground speed calculation. Due to alpha-beta filtering, the ground speed calculation has good stability for constant or low-accelerative flight. The execution time of this software is approximately 0.2 second. Flight testing was done with a prototype Loran-C front-end receiver, with the Loran-C area navigation software demonstrating the ability to provide navigation for the pilot to any point in the Loran-C coverage area in true area navigation fashion without line-of-sight and range restriction typical of VOR area navigation.

Las Matematicas: Lenguaje Universal. Grados Intermedios, Nivel 6a: Suma de Fracciones (Mathematics: A Universal Language. Intermediate Grades, Level 6a: Addition of Fractions).

ERIC Educational Resources Information Center

Dissemination and Assessment Center for Bilingual Education, Austin, TX.

This is one of a series of student booklets designed for use in a bilingual mathematics program in grades 6-8. The general format is to present each page in both Spanish and English. The mathematical topics in this booklet include addition of fractions and mixed numbers. (MK)

Southeast Asia Report

DTIC Science & Technology

1985-09-26

south Sumatra, and in Kalimantan . Some’ production has been going on at both sites in Suma- tra for more than 60 years though coal development on... Kalimantan is much more recent. Prospects for big pro- duction increases at Om- bllln and in certain areas of Kalimantan are en- couraging...vested ln- terests, land compensation disputes, and major geological problems have all bede- villed developments. At the site itself, rehabi

Software Tool Integrating Data Flow Diagrams and Petri Nets

NASA Technical Reports Server (NTRS)

Thronesbery, Carroll; Tavana, Madjid

2010-01-01

Data Flow Diagram - Petri Net (DFPN) is a software tool for analyzing other software to be developed. The full name of this program reflects its design, which combines the benefit of data-flow diagrams (which are typically favored by software analysts) with the power and precision of Petri-net models, without requiring specialized Petri-net training. (A Petri net is a particular type of directed graph, a description of which would exceed the scope of this article.) DFPN assists a software analyst in drawing and specifying a data-flow diagram, then translates the diagram into a Petri net, then enables graphical tracing of execution paths through the Petri net for verification, by the end user, of the properties of the software to be developed. In comparison with prior means of verifying the properties of software to be developed, DFPN makes verification by the end user more nearly certain, thereby making it easier to identify and correct misconceptions earlier in the development process, when correction is less expensive. After the verification by the end user, DFPN generates a printable system specification in the form of descriptions of processes and data.

Microterminal/Microfiche System for Computer-Based Instruction: Hardware and Software Development.

DTIC Science & Technology

1980-10-01

Circuit Description and Schematic of Adaptor Module 57 Appendix C Circuit Description The schematics for circuitry used in the microfiche viewer and the...composed of four major components and associated interfaces. The major components are (a) mirroterminal. (Is) microfiche reader. (0) memory module , and (d...sensing of the position of the platen containing the microfiche so that frame locations can be verified by the microterminal software. The memory module is

Space Station Mission Planning Study (MPS) development study. Volume 3: Software development plan

NASA Technical Reports Server (NTRS)

Klus, W. L.

1987-01-01

A software development plan is presented for the definition, design, and implementation of the Space Station (SS) Payload Mission Planning System (MPS). This plan is an evolving document and must be updated periodically as the SS design and operations concepts as well as the SS MPS concept evolve. The major segments of this plan are as follows: an overview of the SS MPS and a description of its required capabilities including the computer programs identified as configurable items with an explanation of the place and function of each within the system; an overview of the project plan and a detailed description of each development project activity breaking each into lower level tasks where applicable; identification of the resources required and recommendations for the manner in which they should be utilized including recommended schedules and estimated manpower requirements; and a description of the practices, standards, and techniques recommended for the SS MPS Software (SW) development.

An approach to integrating and creating flexible software environments

NASA Technical Reports Server (NTRS)

Bellman, Kirstie L.

1992-01-01

Engineers and scientists are attempting to represent, analyze, and reason about increasingly complex systems. Many researchers have been developing new ways of creating increasingly open environments. In this research on VEHICLES, a conceptual design environment for space systems, an approach was developed, called 'wrapping', to flexibility and integration based on the collection and then processing of explicit qualitative descriptions of all the software resources in the environment. Currently, a simulation is available, VSIM, used to study both the types of wrapping descriptions and the processes necessary to use the metaknowledge to combine, select, adapt, and explain some of the software resources used in VEHICLES. What was learned about the types of knowledge necessary for the wrapping approach is described along with the implications of wrapping for several key software engineering issues.

The Cooperate Assistive Teamwork Environment for Software Description Languages.

PubMed

Groenda, Henning; Seifermann, Stephan; Müller, Karin; Jaworek, Gerhard

2015-01-01

Versatile description languages such as the Unified Modeling Language (UML) are commonly used in software engineering across different application domains in theory and practice. They often use graphical notations and leverage visual memory for expressing complex relations. Those notations are hard to access for people with visual impairment and impede their smooth inclusion in an engineering team. Existing approaches provide textual notations but require manual synchronization between the notations. This paper presents requirements for an accessible and language-aware team work environment as well as our plan for the assistive implementation of Cooperate. An industrial software engineering team consisting of people with and without visual impairment will evaluate the implementation.

Engine Structures Modeling Software System (ESMOSS)

NASA Technical Reports Server (NTRS)

1991-01-01

Engine Structures Modeling Software System (ESMOSS) is the development of a specialized software system for the construction of geometric descriptive and discrete analytical models of engine parts, components, and substructures which can be transferred to finite element analysis programs such as NASTRAN. The NASA Lewis Engine Structures Program is concerned with the development of technology for the rational structural design and analysis of advanced gas turbine engines with emphasis on advanced structural analysis, structural dynamics, structural aspects of aeroelasticity, and life prediction. Fundamental and common to all of these developments is the need for geometric and analytical model descriptions at various engine assembly levels which are generated using ESMOSS.

IUWare and Computing Tools: Indiana University's Approach to Low-Cost Software.

ERIC Educational Resources Information Center

Sheehan, Mark C.; Williams, James G.

1987-01-01

Describes strategies for providing low-cost microcomputer-based software for classroom use on college campuses. Highlights include descriptions of the software (IUWare and Computing Tools); computing center support; license policies; documentation; promotion; distribution; staff, faculty, and user training; problems; and future plans. (LRW)

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2012 CFR

2012-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2013 CFR

2013-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

15 CFR Supplement No. 6 to Part 742 - Technical Questionnaire for Encryption Items

Code of Federal Regulations, 2014 CFR

2014-01-01

... software, provide the following information: (1) Description of all the symmetric and asymmetric encryption... third-party hardware or software encryption components (if any). Identify the manufacturers of the hardware or software components, including specific part numbers and version information as needed to...

Evaluating Math Drill and Practice Programs.

ERIC Educational Resources Information Center

Schnorr, Janice M.; Semmel, Dorothy S.

1986-01-01

General guidelines for a process evaluation of software for a specific subject and grade include: (1) Specify instructional objectives and list desired software program characteristics; (2) Access and review descriptions of programs (information sources for math programs are listed); (3) Preview software; and (4) Compare and make purchase…

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis.

PubMed

Neyeloff, Jeruza L; Fuchs, Sandra C; Moreira, Leila B

2012-01-20

Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis

PubMed Central

2012-01-01

Background Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. Findings We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. Conclusions It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software. PMID:22264277

Evaluating a Service-Oriented Architecture

DTIC Science & Technology

2007-09-01

See the description on page 13. SaaS Software as a service ( SaaS ) is a software delivery model where customers don’t own a copy of the application... serviceability REST Representational State Transfer RIA rich internet application RPC remote procedure call SaaS software as a service SAML Security...Evaluating a Service -Oriented Architecture Phil Bianco, Software Engineering Institute Rick Kotermanski, Summa Technologies Paulo Merson

A Symphony of Software.

ERIC Educational Resources Information Center

Currents, 2002

2002-01-01

Offers a descriptive table of databases that help higher education institutions orchestrate advancement operations. Information includes vendor, contact, software, price, database engine/server platform, recommended reporting tools, record capacity, and client type. (EV)

Proposal for hierarchical description of software systems

NASA Technical Reports Server (NTRS)

Thauboth, H.

1973-01-01

The programming of digital computers has developed into a new dimension full of diffculties, because the hardware of computers has become so powerful that more complex applications are entrusted to computers. The costs of software development, verification, and maintenance are outpacing those of the hardware and the trend is toward futher increase of sophistication of application of computers and consequently of sophistication of software. To obtain better visibility into software systems and to improve the structure of software systems for better tests, verification, and maintenance, a clear, but rigorous description and documentation of software is needed. The purpose of the report is to extend the present methods in order to obtain a documentation that better reflects the interplay between the various components and functions of a software system at different levels of detail without losing the precision in expression. This is done by the use of block diagrams, sequence diagrams, and cross-reference charts. In the appendices, examples from an actual large sofware system, i.e. the Marshall System for Aerospace Systems Simulation (MARSYAS), are presented. The proposed documentation structure is compatible to automation of updating significant portions of the documentation for better software change control.

Processor architectures utilizing magnetic bubble and semi-conductor memories. [for the Omega navigation system

NASA Technical Reports Server (NTRS)

Parrish, E. A., Jr.; Aylor, J. H.

1975-01-01

To aid work being conducted on the feasibility of a low cost Omega navigational receiver, a control panel was designed and constructed according to supplied specifications. Since the proposed Omega receiver is designed around a microprocessor, software engineering necessary for control panel operation is included in the design. The control panel is to be used as an operational model for use in the design of a prototype receiver. A detailed description of the hardware design is presented along with a description of the software needed to operate the panel. A complete description of the operating procedures for the panel are also included.

Reproducible computational biology experiments with SED-ML - The Simulation Experiment Description Markup Language

PubMed Central

2011-01-01

Background The increasing use of computational simulation experiments to inform modern biological research creates new challenges to annotate, archive, share and reproduce such experiments. The recently published Minimum Information About a Simulation Experiment (MIASE) proposes a minimal set of information that should be provided to allow the reproduction of simulation experiments among users and software tools. Results In this article, we present the Simulation Experiment Description Markup Language (SED-ML). SED-ML encodes in a computer-readable exchange format the information required by MIASE to enable reproduction of simulation experiments. It has been developed as a community project and it is defined in a detailed technical specification and additionally provides an XML schema. The version of SED-ML described in this publication is Level 1 Version 1. It covers the description of the most frequent type of simulation experiments in the area, namely time course simulations. SED-ML documents specify which models to use in an experiment, modifications to apply on the models before using them, which simulation procedures to run on each model, what analysis results to output, and how the results should be presented. These descriptions are independent of the underlying model implementation. SED-ML is a software-independent format for encoding the description of simulation experiments; it is not specific to particular simulation tools. Here, we demonstrate that with the growing software support for SED-ML we can effectively exchange executable simulation descriptions. Conclusions With SED-ML, software can exchange simulation experiment descriptions, enabling the validation and reuse of simulation experiments in different tools. Authors of papers reporting simulation experiments can make their simulation protocols available for other scientists to reproduce the results. Because SED-ML is agnostic about exact modeling language(s) used, experiments covering models from different fields of research can be accurately described and combined. PMID:22172142

How Well Can Existing Software Support Processes Accomplish Sustainment of a Non-Developmental Item-Based Acquisition Strategy

DTIC Science & Technology

2017-04-06

Research Hypothesis ........................................................................................................... 15 Research Design ...user community and of accommodating advancing software applications by the vendors. Research Design My approach to this project was to conduct... design descriptions , requirements specifications, test documentation, interface requirement specifications, product specifications, and software

15 CFR Supplement No. 6 to Part 742 - Guidelines for Submitting Review Requests for Encryption Items

Code of Federal Regulations, 2010 CFR

2010-01-01

... brochures or other documentation or specifications related to the technology, commodity or software... commodity or software, provide the following information: (1) Description of all the symmetric and... is provided by third-party hardware or software encryption components (if any). Identify the...

Software Reviews.

ERIC Educational Resources Information Center

Wulfson, Stephen, Ed.

1987-01-01

Provides reviews of six computer software programs designed for use in elementary science education programs. Provides the title, publisher, grade level, and descriptions of courseware on ant farms, drugs, genetics, beachcombing, matter, and test generation. (TW)

Data analysis software for the autoradiographic enhancement process. Volumes 1, 2, and 3, and appendix

NASA Technical Reports Server (NTRS)

Singh, S. P.

1979-01-01

The computer software developed to set up a method for Wiener spectrum analysis of photographic films is presented. This method is used for the quantitative analysis of the autoradiographic enhancement process. The software requirements and design for the autoradiographic enhancement process are given along with the program listings and the users manual. A software description and program listings modification of the data analysis software are included.

Software Management Environment (SME) concepts and architecture, revision 1

NASA Technical Reports Server (NTRS)

Hendrick, Robert; Kistler, David; Valett, Jon

1992-01-01

This document presents the concepts and architecture of the Software Management Environment (SME), developed for the Software Engineering Branch of the Flight Dynamic Division (FDD) of GSFC. The SME provides an integrated set of experience-based management tools that can assist software development managers in managing and planning flight dynamics software development projects. This document provides a high-level description of the types of information required to implement such an automated management tool.

The Buccaneer software for automated model building. 1. Tracing protein chains.

PubMed

Cowtan, Kevin

2006-09-01

A new technique for the automated tracing of protein chains in experimental electron-density maps is described. The technique relies on the repeated application of an oriented electron-density likelihood target function to identify likely C(alpha) positions. This function is applied both in the location of a few promising ;seed' positions in the map and to grow those initial C(alpha) positions into extended chain fragments. Techniques for assembling the chain fragments into an initial chain trace are discussed.

GORGONA - the characteristic of the software system.

NASA Astrophysics Data System (ADS)

Artim, M.; Zejda, M.

A description of the new software system is given. The GORGONA system is established to the processing, making and administration of archives of periodic variable stars observations, observers and observed variable stars.

Model-based software process improvement

NASA Technical Reports Server (NTRS)

Zettervall, Brenda T.

1994-01-01

The activities of a field test site for the Software Engineering Institute's software process definition project are discussed. Products tested included the improvement model itself, descriptive modeling techniques, the CMM level 2 framework document, and the use of process definition guidelines and templates. The software process improvement model represents a five stage cyclic approach for organizational process improvement. The cycles consist of the initiating, diagnosing, establishing, acting, and leveraging phases.

ICESat (GLAS) Science Processing Software Document Series. Volume 1; Science Software Management Plan; 3.0

NASA Technical Reports Server (NTRS)

Hancock, David W., III

1999-01-01

This document provides the Software Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Terminal (IST) Software. For the I-SIPS Software, the SDS will produce Level 0, Level 1, and Level 2 data products as well as the associated product quality assessments and descriptive information. For the IST Software, the SDS will accommodate the GLAS instrument support areas of engineering status, command, performance assessment, and instrument health status.

Real-Time Extended Interface Automata for Software Testing Cases Generation

PubMed Central

Yang, Shunkun; Xu, Jiaqi; Man, Tianlong; Liu, Bin

2014-01-01

Testing and verification of the interface between software components are particularly important due to the large number of complex interactions, which requires the traditional modeling languages to overcome the existing shortcomings in the aspects of temporal information description and software testing input controlling. This paper presents the real-time extended interface automata (RTEIA) which adds clearer and more detailed temporal information description by the application of time words. We also establish the input interface automaton for every input in order to solve the problems of input controlling and interface covering nimbly when applied in the software testing field. Detailed definitions of the RTEIA and the testing cases generation algorithm are provided in this paper. The feasibility and efficiency of this method have been verified in the testing of one real aircraft braking system. PMID:24892080

A Programmable and Configurable Mixed-Mode FPAA SoC

DTIC Science & Technology

2016-03-17

A Programmable and Configurable Mixed-Mode FPAA SoC Sahil Shah, Sihwan Kim, Farhan Adil, Jennifer Hasler, Suma George, Michelle Collins, Richard...Abstract: The authors present a Floating-Gate based, System-On-Chip large-scale Field- Programmable Analog Array IC that integrates divergent concepts...Floating-Gate, SoC, Command Word Classification This paper presents a Floating-Gate (FG) based, System- On-Chip (SoC) large-scale Field- Programmable

Nitrogen input inventory in the Nooksack-Abbotsford-Sumas ...

EPA Pesticide Factsheets

Nitrogen (N) is an essential biological element, so optimizing N use for food production while minimizing the release of N and co-pollutants to the environment is an important challenge. The Nooksack-Abbotsford-Sumas Transboundary (NAS) Region, spanning a portion of the western interface of British Columbia, Washington state, and the Lummi Nation and the Nooksack Tribe, supports agriculture, fisheries, diverse wildlife, and vibrant urban areas. Groundwater nitrate contamination affects thousands of households in this region. Fisheries and air quality are also affected including periodic closures of shellfish harvest. To reduce the release of N to the environment, successful approaches are needed that partner all stakeholders with appropriate institutions to integrate science, outreach and management efforts. Our goal is to determine the distribution and quantities of N inventories of the watershed. This work synthesizes publicly available data on N sources including deposition, sewage and septic inputs, fertilizer and manure applications, marine-derived N from salmon, and more. The information on cross-boundary N inputs to the landscape will be coupled with stream monitoring data and existing knowledge about N inputs and exports from the watershed to estimate the N residual and inform N management in the search for the environmentally and economically viable and effective solutions. We will estimate the N inputs into the NAS region and transfers within

Product Descriptions: Database Software for Science. A MicroSIFT Quarterly Report.

ERIC Educational Resources Information Center

Batey, Anne; And Others

Specific programs and software resources are described in this report on database software for science instruction. Materials are reviewed in the categories of: (1) database management (reviewing AppleWorks, Bank Street School Filer, FileVision, Friendly Filer, MECC DataQuest: The Composer, Scholastic PFS:File, PFS:Report); (2) data files…

Project IMPACT Software Documentation: Overview of the Computer-Administered Instruction Subsystem.

ERIC Educational Resources Information Center

Stelzer, John; Garneau, Jean

Research in Project IMPACT, prototypes of computerized training for Army personnel, is documented in an overview of the IMPACT computer software system for computer-administered instruction, exclusive of instructional software. The overview description provides a basis for an understanding of the rationale and motivation for the development of the…

Orbit attitude processor. STS-1 bench program verification test plan

NASA Technical Reports Server (NTRS)

Mcclain, C. R.

1980-01-01

A plan for the static verification of the STS-1 ATT PROC ORBIT software requirements is presented. The orbit version of the SAPIENS bench program is used to generate the verification data. A brief discussion of the simulation software and flight software modules is presented along with a description of the test cases.

Software for predictive microbiology and risk assessment: a description and comparison of tools presented at the ICPMF8 Software Fair.

PubMed

Tenenhaus-Aziza, Fanny; Ellouze, Mariem

2015-02-01

The 8th International Conference on Predictive Modelling in Food was held in Paris, France in September 2013. One of the major topics of this conference was the transfer of knowledge and tools between academics and stakeholders of the food sector. During the conference, a "Software Fair" was held to provide information and demonstrations of predictive microbiology and risk assessment software. This article presents an overall description of the 16 software tools demonstrated at the session and provides a comparison based on several criteria such as the modeling approach, the different modules available (e.g. databases, predictors, fitting tools, risk assessment tools), the studied environmental factors (temperature, pH, aw, etc.), the type of media (broth or food) and the number and type of the provided micro-organisms (pathogens and spoilers). The present study is a guide to help users select the software tools which are most suitable to their specific needs, before they test and explore the tool(s) in more depth. Copyright © 2014 Elsevier Ltd. All rights reserved.

The computational structural mechanics testbed data library description

NASA Technical Reports Server (NTRS)

Stewart, Caroline B. (Compiler)

1988-01-01

The datasets created and used by the Computational Structural Mechanics Testbed software system are documented by this manual. A description of each dataset including its form, contents, and organization is presented.

The computational structural mechanics testbed data library description

NASA Technical Reports Server (NTRS)

Stewart, Caroline B. (Compiler)

1988-01-01

The datasets created and used by the Computational Structural Mechanics Testbed software system is documented by this manual. A description of each dataset including its form, contents, and organization is presented.

An Overview of Video Description: History, Benefits, and Guidelines

ERIC Educational Resources Information Center

Packer, Jaclyn; Vizenor, Katie; Miele, Joshua A.

2015-01-01

This article provides an overview of the historical context in which video description services have evolved in the United States, a summary of research demonstrating benefits to people with vision loss, an overview of current video description guidelines, and information about current software programs that are available to produce video…

Invited Commentary: Alpha-Gal Allergy: Tip of the Iceberg to a Pivotal Immune Response.

PubMed

Commins, Scott P

2016-09-01

The syndrome of delayed allergic reactions to the carbohydrate galactose-alpha-1,3-galactose ("alpha-gal") has become increasingly recognized in allergy and immunology clinics regionally throughout the southeastern USA. Due to the increasing awareness of this unique food allergy, cases have been identified in the northeastern and central USA as well as in Central and South America, Europe, Asia, Scandinavia, and Australia. Clinically, alpha-gal allergy is characterized by reactions to non-primate mammalian meat (e.g., beef, pork, lamb) that occur 3-6 h following exposure. The IgE response to alpha-gal is thought to develop after tick bites and can result in the loss of tolerance to foods that have been safely consumed for years. Although the initial description of alpha-gal allergy in 2009 was limited to red meat, this epitope is now identified in an expanded number of products, medications and foods-both labeled and unlabeled. Moreover, we are beginning to recognize that alpha-gal food allergy is the tip of the iceberg for this immune response.

A scanning laser rangefinder for a robotic vehicle

NASA Technical Reports Server (NTRS)

Lewis, R. A.; Johnston, A. R.

1977-01-01

A scanning Laser Rangefinder (LRF) which operates in conjunction with a minicomputer as part of a robotic vehicle is described. The description, in sufficient detail for replication, modification, and maintenance, includes both hardware and software. Also included is a discussion of functional requirements relative to a detailing of the instrument and its performance, a summary of the robot system in which the LRF functions, the software organization, interfaces and description, and the applications to which the LRF has been put.

Use of Unified Modeling Language (UML) in Model-Based Development (MBD) For Safety-Critical Applications

DTIC Science & Technology

2014-12-01

appears that UML is becoming the de facto MBD language. OMG® states the following on the MDA® FAQ page: “Although not formally required [for MBD], UML...a known limitation [42], so UML users should plan accordingly, especially for safety-critical programs. For example, “models are not used to...description of the MBD tool chain can be produced. That description could be resident in a Plan for Software Aspects of Certification (PSAC) or Software

Direct measurement of neon production rates by (α,n) reactions in minerals

NASA Astrophysics Data System (ADS)

Cox, Stephen E.; Farley, Kenneth A.; Cherniak, Daniele J.

2015-01-01

The production of nucleogenic neon from alpha particle capture by 18O and 19F offers a potential chronometer sensitive to temperatures higher than the more widely used (U-Th)/He chronometer. The accuracy depends on the cross sections and the calculated stopping power for alpha particles in the mineral being studied. Published 18O(α,n)21Ne production rates are in poor agreement and were calculated from contradictory cross sections, and therefore demand experimental verification. Similarly, the stopping powers for alpha particles are calculated from SRIM (Stopping Range of Ions in Matter software) based on a limited experimental dataset. To address these issues we used a particle accelerator to implant alpha particles at precisely known energies into slabs of synthetic quartz (SiO2) and barium tungstate (BaWO4) to measure 21Ne production from capture by 18O. Within experimental uncertainties the observed 21Ne production rates compare favorably to our predictions using published cross sections and stopping powers, indicating that ages calculated using these quantities are accurate at the ∼3% level. In addition, we measured the 22Ne/21Ne ratio and (U-Th)/He and (U-Th)/Ne ages of Durango fluorapatite, which is an important model system for this work because it contains both oxygen and fluorine. Finally, we present 21Ne/4He production rate ratios for a variety of minerals of geochemical interest along with software for calculating neon production rates and (U-Th)/Ne ages.

A topological substructural molecular design approach for predicting mutagenesis end-points of alpha, beta-unsaturated carbonyl compounds.

PubMed

Pérez-Garrido, Alfonso; Helguera, Aliuska Morales; López, Gabriel Caravaca; Cordeiro, M Natália D S; Escudero, Amalio Garrido

2010-01-31

Chemically reactive, alpha, beta-unsaturated carbonyl compounds are common environmental pollutants able to produce a wide range of adverse effects, including, e.g. mutagenicity. This toxic property can often be related to chemical structure, in particular to specific molecular substructures or fragments (alerts), which can then be used in specialized software or expert systems for predictive purposes. In the past, there have been many attempts to predict the mutagenicity of alpha, beta-unsaturated carbonyl compounds through quantitative structure activity relationships (QSAR) but considering only one exclusive endpoint: the Ames test. Besides, even though those studies give a comprehensive understanding of the phenomenon, they do not provide substructural information that could be useful forward improving expert systems based on structural alerts (SAs). This work reports an evaluation of classification models to probe the mutagenic activity of alpha, beta-unsaturated carbonyl compounds over two endpoints--the Ames and mammalian cell gene mutation tests--based on linear discriminant analysis along with the topological Substructure molecular design (TOPS-MODE) approach. The obtained results showed the better ability of the TOPS-MODE approach in flagging structural alerts for the mutagenicity of these compounds compared to the expert system TOXTREE. Thus, the application of the present QSAR models can aid toxicologists in risk assessment and in prioritizing testing, as well as in the improvement of expert systems, such as the TOXTREE software, where SAs are implemented. 2009 Elsevier Ireland Ltd. All rights reserved.

Lessons learned applying CASE methods/tools to Ada software development projects

NASA Technical Reports Server (NTRS)

Blumberg, Maurice H.; Randall, Richard L.

1993-01-01

This paper describes the lessons learned from introducing CASE methods/tools into organizations and applying them to actual Ada software development projects. This paper will be useful to any organization planning to introduce a software engineering environment (SEE) or evolving an existing one. It contains management level lessons learned, as well as lessons learned in using specific SEE tools/methods. The experiences presented are from Alpha Test projects established under the STARS (Software Technology for Adaptable and Reliable Systems) project. They reflect the front end efforts by those projects to understand the tools/methods, initial experiences in their introduction and use, and later experiences in the use of specific tools/methods and the introduction of new ones.

SWiFT Software Quality Assurance Plan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, Jonathan Charles

This document describes the software development practice areas and processes which contribute to the ability of SWiFT software developers to provide quality software. These processes are designed to satisfy the requirements set forth by the Sandia Software Quality Assurance Program (SSQAP). APPROVALS SWiFT Software Quality Assurance Plan (SAND2016-0765) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Controls Engineer Jonathan Berg (6121) Date CHANGE HISTORY Issue Date Originator(s) Description A 2016/01/27 Jon Berg (06121) Initial release of the SWiFT Software Quality Assurance Plan

Design of Software for Design of Finite Element for Structural Analysis. Ph.D. Thesis - Stuttgart Univ., 22 Nov. 1983

NASA Technical Reports Server (NTRS)

Helfrich, Reinhard

1987-01-01

The concepts of software engineering which allow a user of the finite element method to describe a model, to collect and to check the model data in a data base as well as to form the matrices required for a finite element calculation are examined. Next the components of the model description are conceived including the mesh tree, the topology, the configuration, the kinematic boundary conditions, the data for each element, and the loads. The possibilities for description and review of the data are considered. The concept of the segments for the modularization of the programs follows the components of the model description. The significance of the mesh tree as a globular guiding structure will be understood in view of the principle of the unity of the model, the mesh tree, and the data base. The user-friendly aspects of the software system will be summarized: the principle of language communication, the data generators, error processing, and data security.

Apple's Macintosh.

ERIC Educational Resources Information Center

Miller, Michael J.

1984-01-01

Description of the Macintosh personal, educational, and business computer produced by Apple covers cost; physical characteristics including display devices, circuit boards, and built-in features; company-produced software; third-party produced software; memory and storage capacity; word-processing features; and graphics capabilities. (MBR)

SeaBIRD: A Flexible and Intuitive Planetary Datamining Infrastructure

NASA Astrophysics Data System (ADS)

Politi, R.; Capaccioni, F.; Giardino, M.; Fonte, S.; Capria, M. T.; Turrini, D.; De Sanctis, M. C.; Piccioni, G.

2018-04-01

Description of SeaBIRD (Searchable and Browsable Infrastructure for Repository of Data), a software and hardware infrastructure for multi-mission planetary datamining, with web-based GUI and API set for the integration in users' software.

Hardware/software codesign for embedded RISC core

NASA Astrophysics Data System (ADS)

Liu, Peng

2001-12-01

This paper describes hardware/software codesign method of the extendible embedded RISC core VIRGO, which based on MIPS-I instruction set architecture. VIRGO is described by Verilog hardware description language that has five-stage pipeline with shared 32-bit cache/memory interface, and it is controlled by distributed control scheme. Every pipeline stage has one small controller, which controls the pipeline stage status and cooperation among the pipeline phase. Since description use high level language and structure is distributed, VIRGO core has highly extension that can meet the requirements of application. We take look at the high-definition television MPEG2 MPHL decoder chip, constructed the hardware/software codesign virtual prototyping machine that can research on VIRGO core instruction set architecture, and system on chip memory size requirements, and system on chip software, etc. We also can evaluate the system on chip design and RISC instruction set based on the virtual prototyping machine platform.

Automated Estimation Of Software-Development Costs

NASA Technical Reports Server (NTRS)

Roush, George B.; Reini, William

1993-01-01

COSTMODL is automated software development-estimation tool. Yields significant reduction in risk of cost overruns and failed projects. Accepts description of software product developed and computes estimates of effort required to produce it, calendar schedule required, and distribution of effort and staffing as function of defined set of development life-cycle phases. Written for IBM PC(R)-compatible computers.

[Design and validation of a satisfaction survey with pharmaceutical care received in hospital pharmacyconsultation].

PubMed

Monje-Agudo, Patricia; Borrego-Izquierdo, Yolanda; Robustillo-Cortés, Ma de Las Aguas; Jiménez-Galán, Rocio; Almeida-González, Carmen V; Morillo-Verdugo, Ramón A

2015-05-01

To design and to validate a questionnaire to assess satisfaction with pharmaceutical care (PC) received at the hospital pharmacy. Multicentric study in five andalusian hospital in January 2013. A bibliography search was performed in PUBMED; MESH term; pharmaceutical services, patients satisfaction and questionnaire. Next, the questionnaire was produced by Delphi methodology with ten items and with the following variables; demographics, socials, pharrmacologicals and clinics which the patient was asked for the consequences of the PC in his treatment and illness and for the acceptance with the received service. The patient could answer between one= very insufficient and five= excellent. Before the validation phase questionnaire, a pilot phase was carried out. Descriptive analysis, Cronbach's alpha coefficient and intraclass correlation coefficient (ICC) were performed in both phases. Data analysis was conducted using the SPSS statistical software package release 20.0. In the pilot phase were included 21 questionnaires and 154 of them in validation phase (response index of 100%). In the last phase, 62% (N=96) of patients were men. More than 50% of patients answered "excelent" in all items of questionnaire in both phases. The Cronbach's alpha coefficient and ICC were 0.921 and 0.915 (95%IC: 0.847-0.961) and 0.916 and 0,910 (95%IC: 0.886-0.931) in pilot and validation phases, respectively. A high reliability instrument was designed and validated to evaluate the patient satisfaction with PC received at hospital pharmacy. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Performance of Healthcare Providers Regarding Iranian Women Experiencing Physical Domestic Violence in Isfahan.

PubMed

Yousefnia, Nasim; Nekuei, Nafisehsadat; Farajzadegan, Ziba; Yadegarfar, Ghasem

2018-01-01

Domestic violence (DV) can threaten women's health. Healthcare providers (HCPs) may be the first to come into contact with a victim of DV. Their appropriate performance regarding a DV victim can decrease its complications. The aim of the present study was to investigate HCPs' performance regarding women experiencing DV in emergency and maternity wards of hospitals in Isfahan, Iran. The present descriptive, cross-sectional study was conducted among 300 HCPs working in emergency and maternity wards in hospitals in Isfahan. The participants were selected using quota random sampling from February to May 2016. A researcher-made questionnaire containing the five items of HCPs performance regarding DV (assessment, intervention, documentation, reference, and follow-up) was used to collect data. The reliability and validity of the questionnaire were confirmed, and the collected data were analyzed using SPSS software. Cronbach's alpha was used to assess the reliability of the questionnaires. To present a general description of the data (variables, mean, and standard deviation), the table of frequencies was designed. The performance of the participants regarding DV in the assessment (mean = 64.22), intervention (mean = 68.55), and reference stages (mean = 68.32) were average. However, in the documentation (mean = 72.55) and follow-up stages (mean = 23.10), their performance was good and weak respectively (criterion from 100). Based on the results, because of defects in providing services for women experiencing DV, a practical indigenous guideline should be provided to treat and support these women.

ICESat (GLAS) Science Processing Software Document Series. Volume 2; Science Data Management Plan; 4.0

NASA Technical Reports Server (NTRS)

Jester, Peggy L.; Hancock, David W., III

1999-01-01

This document provides the Data Management Plan for the GLAS Standard Data Software (SDS) supporting the GLAS instrument of the EOS ICESat Spacecraft. The SDS encompasses the ICESat Science Investigator-led Processing System (I-SIPS) Software and the Instrument Support Facility (ISF) Software. This Plan addresses the identification, authority, and description of the interface nodes associated with the GLAS Standard Data Products and the GLAS Ancillary Data.

Description of research interests and current work related to automating software design

NASA Technical Reports Server (NTRS)

Kaindl, Hermann

1992-01-01

Enclosed is a list of selected and recent publications. Most of these publications concern applied research in the areas of software engineering and human-computer interaction. It is felt that domain-specific knowledge plays a major role in software development. Additionally, it is believed that improvements in the general software development process (e.g., object-oriented approaches) will have to be combined with the use of large domain-specific knowledge bases.

Increasing the Practical Impact of Formal Methods for Computer-Aided Software Development: Software Slicing, Merging and Integration

DTIC Science & Technology

1993-10-15

Chairs: Luqi Dave Dampier Workshop Chairman: Valdis Berzins Program Committee Chairs: Luqi Dave Dampier Program Committee: Joseph Goguen David Hislop ...Monterey, CA 93943 9500 Gilman Drive (408) 656-2461 La Jolla, CA 92093 berzins@cs.nps.navy.mil (619) 534-6898 wgg@cs.ucsd.edu A. Berztiss David Hislop ...Research Triangle Park, NC 27709-2211 Pittsburgh, Pennsylvania 15260 (919) 549-4255 (412) 624-8401 hislop @aro-emh 1 .army.mil alpha@cs.pitt.edu Jim

Continuous Risk Management Course. Revised

NASA Technical Reports Server (NTRS)

Hammer, Theodore F.

1999-01-01

This document includes a course plan for Continuous Risk Management taught by the Software Assurance Technology Center along with the Continuous Risk Management Guidebook of the Software Engineering Institute of Carnegie Mellon University and a description of Continuous Risk Management at NASA.

The role of TNF alpha polymorphism and expression in susceptibility to nasal polyposis.

PubMed

Zhang, Guimin; Zhang, Jinmei; Kuang, Manbao; Lin, Peng

2018-05-01

In this study, we first performed a meta-analysis to assess the role of single-nucleotide polymorphism (SNP) within tumor necrosis factor alpha (TNF alpha) gene and TNF alpha expression in the risk of nasal polyposis. STATA 12.0 software was utilized to conduct the Mantel-Haenszel statistics, Cohen statistics, Begg's test, Egger's tests and sensitivity analysis. We systemically carried out the database retrieval and initially identified 486 articles. After screening, 15 articles were included in our meta-analysis. For TNF alpha rs1800629 G/A SNP, compared with control group, an increased risk of nasal polyposis of case group was observed in the models of A vs. G [p (P value of association) = 0.009, OR (odds ratio) = 1.35], GA vs. GG (p = 0.001, OR = 1.69), GA+AA vs. GG (p = 0.010, OR = 1.47). The similar results were observed in Caucasian subgroup (p < 0.05, OR > 1). For TNF alpha rs361525 G/A SNP, no significant difference between control and case group was detected (all p > 0.05). In addition, a significant difference exists between case and control groups in the meta-analyses of TNF alpha expression in nasal mucosal cells, secreted TNF alpha (p < 0.05, OR > 1), but not serum TNF alpha (p = 0.090). The present meta-analysis revealed that TNF alpha rs1800629, increased TNF alpha expression and secretion of nasal mucosal cells were associated with an increased risk of nasal polyposis.

Linear Collider Test Facility: Twiss Parameter Analysis at the IP/Post-IP Location of the ATF2 Beam Line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolzon, Benoit; /Annecy, LAPP; Jeremie, Andrea

2012-07-02

At the first stage of the ATF2 beam tuning, vertical beam size is usually bigger than 3 {micro}m at the IP. Beam waist measurements using wire scanners and a laser wire are usually performed to check the initial matching of the beam through to the IP. These measurements are described in this paper for the optics currently used ({beta}{sub x} = 4cm and {beta}{sub y} = 1mm). Software implemented in the control room to automate these measurements with integrated analysis is also described. Measurements showed that {beta} functions and emittances were within errors of measurements when no rematching and couplingmore » corrections were done. However, it was observed that the waist in the horizontal (X) and vertical (Y) plane was abnormally shifted and simulations were performed to try to understand these shifts. They also showed that multiknobs are needed in the current optics to correct simultaneously {alpha}{sub x}, {alpha}{sub y} and the horizontal dispersion (D{sub x}). Such multiknobs were found and their linearity and orthogonality were successfully checked using MAD optics code. The software for these multiknobs was implemented in the control room and waist scan measurements using the {alpha}{sub y} knob were successfully performed.« less

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

A software framework for pipelined arithmetic algorithms in field programmable gate arrays

NASA Astrophysics Data System (ADS)

Kim, J. B.; Won, E.

2018-03-01

Pipelined algorithms implemented in field programmable gate arrays are extensively used for hardware triggers in the modern experimental high energy physics field and the complexity of such algorithms increases rapidly. For development of such hardware triggers, algorithms are developed in C++, ported to hardware description language for synthesizing firmware, and then ported back to C++ for simulating the firmware response down to the single bit level. We present a C++ software framework which automatically simulates and generates hardware description language code for pipelined arithmetic algorithms.

TACAN operational description for the space shuttle orbital flight test program

NASA Technical Reports Server (NTRS)

Hughes, C. L.; Hudock, P. J.

1979-01-01

The TACAN subsystems (three TACAN transponders, six antennas, a subsystem operating program, and redundancy management software in a tutorial form) are discussed and the interaction between these subsystems and the shuttle navigation system are identified. The use of TACAN during the first space transportation system (STS-1), is followed by a brief functional description of the TACAN hardware, then proceeds to cover the software units with a view to the STS-1, and ends with a discussion on the shuttle usage of the TACAN data and anticipated performance.

Preliminary description of the area navigation software for a microcomputer-based Loran-C receiver

NASA Technical Reports Server (NTRS)

Oguri, F.

1983-01-01

The development of new software implementation of this software on a microcomputer (MOS 6502) to provide high quality navigation information is described. This software development provides Area/Route Navigation (RNAV) information from Time Differences (TDs) in raw form using an elliptical Earth model and a spherical model. The software is prepared for the microcomputer based Loran-C receiver. To compute navigation infomation, a (MOS 6502) microcomputer and a mathematical chip (AM 9511A) were combined with the Loran-C receiver. Final data reveals that this software does indeed provide accurate information with reasonable execution times.

Analytical and Methodological Issues in the Use of Qualitative Data Analysis Software: A Description of Three Studies.

ERIC Educational Resources Information Center

Margerum-Leys, Jon; Kupperman, Jeff; Boyle-Heimann, Kristen

This paper presents perspectives on the use of data analysis software in the process of qualitative research. These perspectives were gained in the conduct of three qualitative research studies that differed in theoretical frames, areas of interests, and scope. Their common use of a particular data analysis software package allows the exploration…

Guidelines for applying the Composite Specification Model (CSM)

NASA Technical Reports Server (NTRS)

Agresti, William

1987-01-01

The Composite Specification Model (CSM) is an approach to representing software requirements. Guidelines are provided for applying CSM and developing each of the three descriptive views of the software: the contextual view, using entities and relationships; the dynamic view, using states and transitions; and the function view, using data flows and processes. Using CSM results in a software specification document, which is outlined.

Prete-moi Ton Logiciel pour Ecrire un Mot (Lend Me Your Software Program So I Can Write a Letter).

ERIC Educational Resources Information Center

Mangenot, Francois

1993-01-01

A brief discussion and description of one commercially available software package ("Pour Ecrire un Mot") for writing letters of various types uses the love letter as an example of the software's functioning. Answers to the prompting questions on the screen determine the few variable parameters of the text to be generated. (four…

Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 1: Concepts and activity descriptions

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paul S.; Crump, John W.; Ackley, Keith A.

1992-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at effectively combining tool and data integration mechanisms with a model of the software development process to provide an intelligent integrated software development environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The Advanced Software Development Workstation (ASDW) program is conducting research into development of advanced technologies for Computer Aided Software Engineering (CASE).

Neurospora crassa alpha-ketoglutarate dehydrogenase complex: description, resolution of components and catalytic properties.

PubMed

Bessam, H; Mareck, A M; Foucher, B

1989-01-27

A method is proposed for the purification of the Neurospora crassa alpha-ketoglutarate dehydrogenase complex, and the main points for preserving its activity, which seems to be particularly fragile in fungus, are discussed. Resolution of the constitutive enzymes was attempted and permitted the identification of the three protein bands resolved on SDS-polyacrylamide gel electrophoresis as E3, E1 and E2 with respective Mr values of 54,000, 53,000 and 49,000. Catalytic properties of the purified complex were established showing the importance of divalent cations in regulating the activity level. The role of Ca2+ in particular was investigated. It was shown that Ca2+ diminishes the Km value of the N. crassa alpha-ketoglutarate dehydrogenase complex for alpha-ketoglutarate in the physiological concentration range, as previously observed for the mammalian complexes.

The glycoinositol-phospholipids of Phytomonas.

PubMed

Redman, C A; Schneider, P; Mehlert, A; Ferguson, M A

1995-10-15

The Phytomonas spp. are trypanosomatid parasites of plants. A polar glycolipid fraction of a Phytomonas sp., isolated from the plant Euphorbia characias and grown in culture, was fractionated into four major glycolipid species (Phy 1-4). The glycolipids were analysed by chemical and enzymic modifications, composition and methylation analyses, electrospray mass spectrometry and microsequencing after HNO2 deamination and NaB3H4 reduction. The water-soluble headgroup of the Phy2 glycolipid was also analysed by 1H NMR. All four glycolipids were shown to be glycoinositol-phospholipids (GIPLs) with phosphatidylinositol (PI) moieties containing the fully saturated alkylacylglycerol lipids 1-O-hexadecyl-2-O-palmitoylglycerol and 1-O-hexadecyl-2-O-stearoylglycerol. The structures of the Phy 1-4 GIPLs are: Man alpha 1-2Man alpha 1-6Man alpha 1-4GlcN alpha 1-6PI, Glc alpha 1-2(NH2-CH2CH2-HPO4-)Man alpha 1-2Man alpha 1-6Man alpha 1-4GlcN alpha 1-6PI, [formula: see text] Glc alpha 1-2(NH2CH2CH2-HPO4-)Man alpha 1-2Man alpha 1-6Man alpha 1-4(NH2-CH2CH2-HPO4-)GlcN alpha 1-6PI [formula: see text] and Glc alpha 1-2Glc alpha 1-2(NH2CH2-CH2-HPO4-)Man alpha 1-2Man alpha 1-6Man alpha 1-4(NH2CH2CH2-HPO4-)-GlcN alpha 1-6PI. [formula: see text] The Phytomonas GIPLs represent a novel series of structures. This is the first description of the chemical structure of cell-surface molecules of this plant pathogen. The Phytomonas GIPLs are compared with those of other trypanosomatid parasites and are discussed with respect to trypanosomatid phylogenetic relationships.

The glycoinositol-phospholipids of Phytomonas.

PubMed Central

Redman, C A; Schneider, P; Mehlert, A; Ferguson, M A

1995-01-01

The Phytomonas spp. are trypanosomatid parasites of plants. A polar glycolipid fraction of a Phytomonas sp., isolated from the plant Euphorbia characias and grown in culture, was fractionated into four major glycolipid species (Phy 1-4). The glycolipids were analysed by chemical and enzymic modifications, composition and methylation analyses, electrospray mass spectrometry and microsequencing after HNO2 deamination and NaB3H4 reduction. The water-soluble headgroup of the Phy2 glycolipid was also analysed by 1H NMR. All four glycolipids were shown to be glycoinositol-phospholipids (GIPLs) with phosphatidylinositol (PI) moieties containing the fully saturated alkylacylglycerol lipids 1-O-hexadecyl-2-O-palmitoylglycerol and 1-O-hexadecyl-2-O-stearoylglycerol. The structures of the Phy 1-4 GIPLs are: Man alpha 1-2Man alpha 1-6Man alpha 1-4GlcN alpha 1-6PI, Glc alpha 1-2(NH2-CH2CH2-HPO4-)Man alpha 1-2Man alpha 1-6Man alpha 1-4GlcN alpha 1-6PI, [formula: see text] Glc alpha 1-2(NH2CH2CH2-HPO4-)Man alpha 1-2Man alpha 1-6Man alpha 1-4(NH2-CH2CH2-HPO4-)GlcN alpha 1-6PI [formula: see text] and Glc alpha 1-2Glc alpha 1-2(NH2CH2-CH2-HPO4-)Man alpha 1-2Man alpha 1-6Man alpha 1-4(NH2CH2CH2-HPO4-)-GlcN alpha 1-6PI. [formula: see text] The Phytomonas GIPLs represent a novel series of structures. This is the first description of the chemical structure of cell-surface molecules of this plant pathogen. The Phytomonas GIPLs are compared with those of other trypanosomatid parasites and are discussed with respect to trypanosomatid phylogenetic relationships. Images Figure 1 Figure 2 Figure 3 Figure 6 Figure 7 PMID:7487886

CrossTalk: The Journal of Defense Software Engineering. Volume 20, Number 6, June 2007

DTIC Science & Technology

2007-06-01

California. He has co-authored the book Software Cost Estimation With COCOMO II with Barry Boehm and others. Clark helped define the COCOMO II model...Software Engineering at the University of Southern California. She worked with Barry Boehm and Chris Abts to develop and calibrate a cost-estimation...2003/02/ schorsch.html>. 2. See “Software Engineering, A Practitioners Approach” by Roger Pressman for a good description of coupling, cohesion

Advanced transport operating system software upgrade: Flight management/flight controls software description

NASA Technical Reports Server (NTRS)

Clinedinst, Winston C.; Debure, Kelly R.; Dickson, Richard W.; Heaphy, William J.; Parks, Mark A.; Slominski, Christopher J.; Wolverton, David A.

1988-01-01

The Flight Management/Flight Controls (FM/FC) software for the Norden 2 (PDP-11/70M) computer installed on the NASA 737 aircraft is described. The software computes the navigation position estimates, guidance commands, those commands to be issued to the control surfaces to direct the aircraft in flight based on the modes selected on the Advanced Guidance Control System (AGSC) mode panel, and the flight path selected via the Navigation Control/Display Unit (NCDU).

Functional description of the ISIS system

NASA Technical Reports Server (NTRS)

Berman, W. J.

1979-01-01

Development of software for avionic and aerospace applications (flight software) is influenced by a unique combination of factors which includes: (1) length of the life cycle of each project; (2) necessity for cooperation between the aerospace industry and NASA; (3) the need for flight software that is highly reliable; (4) the increasing complexity and size of flight software; and (5) the high quality of the programmers and the tightening of project budgets. The interactive software invocation system (ISIS) which is described is designed to overcome the problems created by this combination of factors.

Classification software technique assessment

NASA Technical Reports Server (NTRS)

Jayroe, R. R., Jr.; Atkinson, R.; Dasarathy, B. V.; Lybanon, M.; Ramapryian, H. K.

1976-01-01

A catalog of software options is presented for the use of local user communities to obtain software for analyzing remotely sensed multispectral imagery. The resources required to utilize a particular software program are described. Descriptions of how a particular program analyzes data and the performance of that program for an application and data set provided by the user are shown. An effort is made to establish a statistical performance base for various software programs with regard to different data sets and analysis applications, to determine the status of the state-of-the-art.

Observations of chromospheric lines from OSO-8

NASA Technical Reports Server (NTRS)

Grossmann-Doerth, U.; Kneer, F.; Uexkuell, M.; Artzner, G. E.; Vial, J. C.

1980-01-01

Results of OSO-8 measurements of the line profiles of the solar Lyman alpha, Ca II K and Mg II k lines are presented. Observations were obtained with the Laboratoire de Physique Stellaire et Planetaire spectrometer at spectral resolutions of 0.25 and 0.060 A for Lyman alpha and 0.025 A for the Mg II and Ca II lines. The Lyman alpha profiles are found to be highly variable according to spatial position with the intensities of the three lines well correlated, and confirm previous observations of the quiet solar chromosphere. Data suggest that the quiet chromosphere is a dynamical phenomenon whose description in terms of a static model atmosphere is only qualitatively valid at best.

An evaluation of the psychometric properties of the Purdue Pharmacist Directive Guidance Scale using SPSS and R software packages.

PubMed

Marr-Lyon, Lisa R; Gupchup, Gireesh V; Anderson, Joe R

2012-01-01

The Purdue Pharmacist Directive Guidance (PPDG) Scale was developed to assess patients' perceptions of the level of pharmacist-provided (1) instruction and (2) feedback and goal-setting-2 aspects of pharmaceutical care. Calculations of its psychometric properties stemming from SPSS and R were similar, but distinct differences were apparent. Using SPSS and R software packages, researchers aimed to examine the construct validity of the PPDG using a higher order factoring procedure; in tandem, McDonald's omega and Cronbach's alpha were calculated as means of reliability analyses. Ninety-nine patients with either type I or type II diabetes, aged 18 years or older, able to read and write English, and who could provide written-informed consent participated in the study. Data were collected in 8 community pharmacies in New Mexico. Using R, (1) a principal axis factor analysis with promax (oblique) rotation was conducted, (2) a Schmid-Leiman transformation was attained, and (3) McDonald's omega and Cronbach's alpha were computed. Using SPSS, subscale findings were validated by conducting a principal axis factor analysis with promax rotation; strict parallels and Cronbach's alpha reliabilities were calculated. McDonald's omega and Cronbach's alpha were robust, with coefficients greater than 0.90; principal axis factor analysis with promax rotation revealed construct similarities with an overall general factor emerging from R. Further subjecting the PPDG to rigorous psychometric testing revealed stronger quantitative support of the overall general factor of directive guidance and subscales of instruction and feedback and goal-setting. Copyright © 2012 Elsevier Inc. All rights reserved.

Separation of detector non-linearity issues and multiple ionization satellites in alpha-particle PIXE

NASA Astrophysics Data System (ADS)

Campbell, John L.; Ganly, Brianna; Heirwegh, Christopher M.; Maxwell, John A.

2018-01-01

Multiple ionization satellites are prominent features in X-ray spectra induced by MeV energy alpha particles. It follows that the accuracy of PIXE analysis using alpha particles can be improved if these features are explicitly incorporated in the peak model description when fitting the spectra with GUPIX or other codes for least-squares fitting PIXE spectra and extracting element concentrations. A method for this incorporation is described and is tested using spectra recorded on Mars by the Curiosity rover's alpha particle X-ray spectrometer. These spectra are induced by both PIXE and X-ray fluorescence, resulting in a spectral energy range from ∼1 to ∼25 keV. This range is valuable in determining the energy-channel calibration, which departs from linearity at low X-ray energies. It makes it possible to separate the effects of the satellites from an instrumental non-linearity component. The quality of least-squares spectrum fits is significantly improved, raising the level of confidence in analytical results from alpha-induced PIXE.

Localization of alpha-dystroglycan on the podocyte: from top to toe.

PubMed

Vogtländer, Nils P J; Dijkman, Henry; Bakker, Marinka A H; Campbell, Kevin P; van der Vlag, Johan; Berden, Jo H M

2005-11-01

alpha-Dystroglycan (DG) is a negatively charged membrane-associated glycoprotein that links the cytoskeleton to the extracellular matrix. Previously, we described that alpha-DG covers the whole podocyte cell membrane in the rat. However, our finding was challenged by the description of a strictly basolateral localization in human kidney biopsies, using a different antibody against alpha-DG. Therefore, we studied the exact localization of glomerular alpha-DG by using these two antibodies in both species. The studies were performed by using monoclonal antibodies (MoAbs) IIH6 and VIA4.1 in immunofluorescence, confocal microscopy, and immunoelectron microscopy on both rat and human kidney sections, as well as on cultured mouse podocytes. The apical localization of alpha-DG on podocytes was more dominant than the basolateral localization. The basolateral staining with MoAb VIA4.1 was more pronounced than that of MoAb IIH6. With both MoAbs, the staining in rat kidneys was more prominent, in comparison to human kidneys. We conclude that alpha-DG is expressed at both the basolateral and apical sides of the podocyte. This localization suggests that alpha-DG plays a dual role in the maintenance of the unique architecture of podocytes by its binding to the glomerular basement membrane, and in the maintenance of the integrity of the filtration slit, respectively.

Methods for cost estimation in software project management

NASA Astrophysics Data System (ADS)

Briciu, C. V.; Filip, I.; Indries, I. I.

2016-02-01

The speed in which the processes used in software development field have changed makes it very difficult the task of forecasting the overall costs for a software project. By many researchers, this task has been considered unachievable, but there is a group of scientist for which this task can be solved using the already known mathematical methods (e.g. multiple linear regressions) and the new techniques as genetic programming and neural networks. The paper presents a solution for building a model for the cost estimation models in the software project management using genetic algorithms starting from the PROMISE datasets related COCOMO 81 model. In the first part of the paper, a summary of the major achievements in the research area of finding a model for estimating the overall project costs is presented together with the description of the existing software development process models. In the last part, a basic proposal of a mathematical model of a genetic programming is proposed including here the description of the chosen fitness function and chromosome representation. The perspective of model described it linked with the current reality of the software development considering as basis the software product life cycle and the current challenges and innovations in the software development area. Based on the author's experiences and the analysis of the existing models and product lifecycle it was concluded that estimation models should be adapted with the new technologies and emerging systems and they depend largely by the chosen software development method.

Software Review.

ERIC Educational Resources Information Center

McGrath, Diane, Ed.

1989-01-01

Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game…

Software for Experimental Air-Ground Data Link Volume I : Functional Description and Flowcharts.

DOT National Transportation Integrated Search

1975-10-01

Experimental Data Link System which was implemented for flight test during the Air-Ground Data Link Development Program (FAA-TSC Project Number FA-13). : The software development is presented in three volumes as follows: : Volume I: -- Functional Des...

Software Engineering Laboratory (SEL) programmer workbench phase 1 evaluation

NASA Technical Reports Server (NTRS)

1981-01-01

Phase 1 of the SEL programmer workbench consists of the design of the following three components: communications link, command language processor, and collection of software aids. A brief description, and evaluation, and recommendations are presented for each of these three components.

Motion Imagery and Robotics Application Project (MIRA)

NASA Technical Reports Server (NTRS)

Grubbs, Rodney P.

2010-01-01

This viewgraph presentation describes the Motion Imagery and Robotics Application (MIRA) Project. A detailed description of the MIRA camera service software architecture, encoder features, and on-board communications are presented. A description of a candidate camera under development is also shown.

Using ArchE in the Classroom: One Experience

DTIC Science & Technology

2007-09-01

The Architecture Expert (ArchE) tool serves as a software architecture design assistant. It embodies knowledge of quality attributes and the relation...between the achievement of quality attribute requirements and architecture design . This technical note describes the use of a pre-alpha release of

Program Helps Standardize Documentation Of Software

NASA Technical Reports Server (NTRS)

Howe, G.

1994-01-01

Intelligent Documentation Management System, IDMS, computer program developed to assist project managers in implementing information system documentation standard known as NASA-STD-2100-91, NASA STD, COS-10300, of NASA's Software Management and Assurance Program. Standard consists of data-item descriptions or templates, each of which governs particular component of software documentation. IDMS helps program manager in tailoring documentation standard to project. Written in C language.

Training and Personnel Systems Technology R&D Program Description FY 1988/1989. Revision

DTIC Science & Technology

1988-05-20

scenario software /database, and computer generated imagery (CIG) subsystem resources; (d) investigation of feasibility of, and preparation of plans... computer language to Army flight simulator for demonstration and evaluation. The objective is to have flight simulators which use the same software as...the Automated Performance and Readiness Training System (APARTS), which is a computer software system which facilitates training management through

Advanced Transport Operating System (ATOPS) utility library software description

NASA Technical Reports Server (NTRS)

Clinedinst, Winston C.; Slominski, Christopher J.; Dickson, Richard W.; Wolverton, David A.

1993-01-01

The individual software processes used in the flight computers on-board the Advanced Transport Operating System (ATOPS) aircraft have many common functional elements. A library of commonly used software modules was created for general uses among the processes. The library includes modules for mathematical computations, data formatting, system database interfacing, and condition handling. The modules available in the library and their associated calling requirements are described.

Advanced information processing system: Input/output network management software

NASA Technical Reports Server (NTRS)

Nagle, Gail; Alger, Linda; Kemp, Alexander

1988-01-01

The purpose of this document is to provide the software requirements and specifications for the Input/Output Network Management Services for the Advanced Information Processing System. This introduction and overview section is provided to briefly outline the overall architecture and software requirements of the AIPS system before discussing the details of the design requirements and specifications of the AIPS I/O Network Management software. A brief overview of the AIPS architecture followed by a more detailed description of the network architecture.

Software for Statistical Analysis of Weibull Distributions with Application to Gear Fatigue Data: User Manual with Verification

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.

2002-01-01

The Weibull distribution has been widely adopted for the statistical description and inference of fatigue data. This document provides user instructions, examples, and verification for software to analyze gear fatigue test data. The software was developed presuming the data are adequately modeled using a two-parameter Weibull distribution. The calculations are based on likelihood methods, and the approach taken is valid for data that include type 1 censoring. The software was verified by reproducing results published by others.

Software Management Environment (SME) release 9.4 user reference material

NASA Technical Reports Server (NTRS)

Hendrick, R.; Kistler, D.; Manter, K.

1992-01-01

This document contains user reference material for the Software Management Environment (SME) prototype, developed for the Systems Development Branch (Code 552) of the Flight Dynamics Division (FDD) of Goddard Space Flight Center (GSFC). The SME provides an integrated set of management tools that can be used by software development managers in their day-to-day management and planning activities. This document provides an overview of the SME, a description of all functions, and detailed instructions concerning the software's installation and use.

Software for Statistical Analysis of Weibull Distributions with Application to Gear Fatigue Data: User Manual with Verification

NASA Technical Reports Server (NTRS)

Kranz, Timothy L.

2002-01-01

The Weibull distribution has been widely adopted for the statistical description and inference of fatigue data. This document provides user instructions, examples, and verification for software to analyze gear fatigue test data. The software was developed presuming the data are adequately modeled using a two-parameter Weibull distribution. The calculations are based on likelihood methods, and the approach taken is valid for data that include type I censoring. The software was verified by reproducing results published by others.

Cold fission description with constant and varying mass asymmetries

NASA Astrophysics Data System (ADS)

Duarte, S. B.; Rodríguez, O.; Tavares, O. A. P.; Gonçalves, M.; García, F.; Guzmán, F.

1998-05-01

Different descriptions for varying the mass asymmetry in the fragmentation process are used to calculate the cold fission barrier penetrability. The relevance of the appropriate choice for both the description of the prescission phase and inertia coefficient to unify alpha decay, cluster radioactivity, and spontaneous cold fission processes in the same theoretical framework is explicitly shown. We calculate the half-life of all possible partition modes of nuclei of A>200 following the most recent Mass Table by Audi and Wapstra. It is shown that if one uses the description in which the mass asymmetry is maintained constant during the fragmentation process, the experimental half-life values and mass yield of 234U cold fission are satisfactorily reproduced.

Goethe Gossips with Grass: Using Computer Chatting Software in an Introductory Literature Course.

ERIC Educational Resources Information Center

Fraser, Catherine C.

1999-01-01

Students in a third-year introduction to German literature course chatted over networked computers, using "FirstClass" software. A brief description of the course design is provided with detailed information on how the three chat sessions were organized. (Author/VWL)

Heterogeneous Software System Interoperability Through Computer-Aided Resolution of Modeling Differences

DTIC Science & Technology

2002-06-01

techniques for addressing the software component retrieval problem. Steigerwald [Ste91] introduced the use of algebraic specifications for defining the...provided in terms of a specification written using Luqi’s Prototype Specification Description Language (PSDL) [LBY88] augmented with an algebraic

PubMed Central

Leduc, Y.; Cauchon, M.; Emond, J. G.; Ouellet, J.

1995-01-01

OBJECTIVE: To develop and implement a computerized version of the International Classification of Primary Care. To create a data bank and to conduct a descriptive study of our clinic's clientele. DESIGN: Testing a software program and creating a data bank. SETTING: Family Medicine Unit at Enfant-Jésus Hospital, Quebec City. PARTICIPANTS: All Family Medicine Unit doctors and patients seen between July 1, 1990, and June 30, 1993. MAIN OUTCOME MEASURE: Description of our clientele's health problems using the ICPC. RESULTS: During the study, 48,415 diagnostic codes for 33,033 visits were entered into the bank. For close to 50% of these visits, two or more health problems were coded. There was good correlation between the description of our clientele and descriptions in other studies in the literature. CONCLUSION: This article describes the development of a data bank in a family medicine unit using a software program based on the ICPC. Our 3-year experiment demonstrated that the method works well in family physicians' daily practice. A descriptive study of our clientele is presented, as well as a few examples of the many applications of such a data bank. PMID:7580382

LANDSAT-D flight segment operations manual. Appendix B: OBC software operations

NASA Technical Reports Server (NTRS)

Talipsky, R.

1981-01-01

The LANDSAT 4 satellite contains two NASA standard spacecraft computers and 65,536 words of memory. Onboard computer software is divided into flight executive and applications processors. Both applications processors and the flight executive use one or more of 67 system tables to obtain variables, constants, and software flags. Output from the software for monitoring operation is via 49 OBC telemetry reports subcommutated in the spacecraft telemetry. Information is provided about the flight software as it is used to control the various spacecraft operations and interpret operational OBC telemetry. Processor function descriptions, processor operation, software constraints, processor system tables, processor telemetry, and processor flow charts are presented.

Modernized build and test infrastructure for control software at ESO: highly flexible building, testing, and automatic quality practices for telescope control software

NASA Astrophysics Data System (ADS)

Pellegrin, F.; Jeram, B.; Haucke, J.; Feyrin, S.

2016-07-01

The paper describes the introduction of a new automatized build and test infrastructure, based on the open-source software Jenkins1, into the ESO Very Large Telescope control software to replace the preexisting in-house solution. A brief introduction to software quality practices is given, a description of the previous solution, the limitations of it and new upcoming requirements. Modifications required to adapt the new system are described, how these were implemented to current software and the results obtained. An overview on how the new system may be used in future projects is also presented.

MUST - An integrated system of support tools for research flight software engineering. [Multipurpose User-oriented Software Technology

NASA Technical Reports Server (NTRS)

Straeter, T. A.; Foudriat, E. C.; Will, R. W.

1977-01-01

The objectives of NASA's MUST (Multipurpose User-oriented Software Technology) program at Langley Research Center are to cut the cost of producing software which effectively utilizes digital systems for flight research. These objectives will be accomplished by providing an integrated system of support software tools for use throughout the research flight software development process. A description of the overall MUST program and its progress toward the release of a first MUST system will be presented. This release includes: a special interactive user interface, a library of subroutines, assemblers, a compiler, automatic documentation tools, and a test and simulation system.

Software architecture of the Magdalena Ridge Observatory Interferometer

NASA Astrophysics Data System (ADS)

Farris, Allen; Klinglesmith, Dan; Seamons, John; Torres, Nicolas; Buscher, David; Young, John

2010-07-01

Merging software from 36 independent work packages into a coherent, unified software system with a lifespan of twenty years is the challenge faced by the Magdalena Ridge Observatory Interferometer (MROI). We solve this problem by using standardized interface software automatically generated from simple highlevel descriptions of these systems, relying only on Linux, GNU, and POSIX without complex software such as CORBA. This approach, based on gigabit Ethernet with a TCP/IP protocol, provides the flexibility to integrate and manage diverse, independent systems using a centralized supervisory system that provides a database manager, data collectors, fault handling, and an operator interface.

Data analysis and software support for the Earth radiation budget experiment

NASA Technical Reports Server (NTRS)

Edmonds, W.; Natarajan, S.

1987-01-01

Computer programming and data analysis efforts were performed in support of the Earth Radiation Budget Experiment (ERBE) at NASA/Langley. A brief description of the ERBE followed by sections describing software development and data analysis for both prelaunch and postlaunch instrument data are presented.

Computer Needs of Severely Mentally Retarded Persons.

ERIC Educational Resources Information Center

Flanagan, Kelly

1982-01-01

The article reviews technology applicable for use by severely mentally retarded learners. Descriptions are given of assistive devices (including communication aids), controls and interfaces (such as single switch access to standard software), and software (including games to teach cause and effect and simple matching and counting). (CL)

Description of the IV + V System Software Package.

ERIC Educational Resources Information Center

Microcomputers for Information Management: An International Journal for Library and Information Services, 1984

1984-01-01

Describes the IV + V System, a software package designed by the Institut fur Maschinelle Dokumentation for the United Nations General Information Programme and UNISIST to support automation of local information and documentation services. Principle program features and functions outlined include input/output, databank, text image, output, and…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crewell, S.; Fabian, R.; Kuenzi, K.

In February 1993 measurements of chlorine monoxide ClO, one of the key substances in catalytic ozone destruction, were performed over Scandinavia by two microwave receivers, the Submillimeter Atmospheric Sounder (SUMAS) on board the German research aircraft FALCON and the Microwave Limb Sounder (MLS) on board the Upper Atmospheric Research Satellite (UARS). High ClO concentrations (>1 ppb) inside the polar vortex at approximately 20km altitude were detected by both experiments. A comparison shows good agreement of both sensors in the location of enhanced ClO. 11 refs., 5 figs.

Software Design Description for the Tidal Open-boundary Prediction System (TOPS)

DTIC Science & Technology

2010-05-04

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--10-9209 Approved for public release; distribution is unlimited. Software ...Department of Defense, Washington Headquarters Services , Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite...RESPONSIBLE PERSON 19b. TELEPHONE NUMBER (include area code) b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Software Design

Test Driven Development of Scientific Models

NASA Technical Reports Server (NTRS)

Clune, Thomas L.

2012-01-01

Test-Driven Development (TDD) is a software development process that promises many advantages for developer productivity and has become widely accepted among professional software engineers. As the name suggests, TDD practitioners alternate between writing short automated tests and producing code that passes those tests. Although this overly simplified description will undoubtedly sound prohibitively burdensome to many uninitiated developers, the advent of powerful unit-testing frameworks greatly reduces the effort required to produce and routinely execute suites of tests. By testimony, many developers find TDD to be addicting after only a few days of exposure, and find it unthinkable to return to previous practices. Of course, scientific/technical software differs from other software categories in a number of important respects, but I nonetheless believe that TDD is quite applicable to the development of such software and has the potential to significantly improve programmer productivity and code quality within the scientific community. After a detailed introduction to TDD, I will present the experience within the Software Systems Support Office (SSSO) in applying the technique to various scientific applications. This discussion will emphasize the various direct and indirect benefits as well as some of the difficulties and limitations of the methodology. I will conclude with a brief description of pFUnit, a unit testing framework I co-developed to support test-driven development of parallel Fortran applications.

Measurements of confined alphas and tritons in the MHD quiescent core of TFTR plasmas using the pellet charge exchange diagnostic

NASA Astrophysics Data System (ADS)

Medley, S. S.; Budny, R. V.; Mansfield, D. K.; Redi, M. H.; Roquemore, A. L.; Fisher, R. K.; Duong, H. H.; McChesney, J. M.; Parks, P. B.; Petrov, M. P.; Gorelenkov, N. N.

1996-10-01

The energy distributions and radial density profiles of the fast confined trapped alpha particles in DT experiments on TFTR are being measured in the energy range 0.5 - 3.5 MeV using the pellet charge exchange (PCX) diagnostic. A brief description of the measurement technique which involves active neutral particle analysis using the ablation cloud surrounding an injected impurity pellet as the neutralizer is presented. This paper focuses on alpha and triton measurements in the core of MHD quiescent TFTR discharges where the expected classical slowing-down and pitch angle scattering effects are not complicated by stochastic ripple diffusion and sawtooth activity. In particular, the first measurement of the alpha slowing-down distribution up to the birth energy, obtained using boron pellet injection, is presented. The measurements are compared with predictions using either the TRANSP Monte Carlo code and/or a Fokker - Planck Post-TRANSP processor code, which assumes that the alphas and tritons are well confined and slow down classically. Both the shape of the measured alpha and triton energy distributions and their density ratios are in good agreement with the code calculations. We can conclude that the PCX measurements are consistent with classical thermalization of the fusion-generated alphas and tritons.

High-Alpha Research Vehicle Lateral-Directional Control Law Description, Analyses, and Simulation Results

NASA Technical Reports Server (NTRS)

Davidson, John B.; Murphy, Patrick C.; Lallman, Frederick J.; Hoffler, Keith D.; Bacon, Barton J.

1998-01-01

This report contains a description of a lateral-directional control law designed for the NASA High-Alpha Research Vehicle (HARV). The HARV is a F/A-18 aircraft modified to include a research flight computer, spin chute, and thrust-vectoring in the pitch and yaw axes. Two separate design tools, CRAFT and Pseudo Controls, were integrated to synthesize the lateral-directional control law. This report contains a description of the lateral-directional control law, analyses, and nonlinear simulation (batch and piloted) results. Linear analysis results include closed-loop eigenvalues, stability margins, robustness to changes in various plant parameters, and servo-elastic frequency responses. Step time responses from nonlinear batch simulation are presented and compared to design guidelines. Piloted simulation task scenarios, task guidelines, and pilot subjective ratings for the various maneuvers are discussed. Linear analysis shows that the control law meets the stability margin guidelines and is robust to stability and control parameter changes. Nonlinear batch simulation analysis shows the control law exhibits good performance and meets most of the design guidelines over the entire range of angle-of-attack. This control law (designated NASA-1A) was flight tested during the Summer of 1994 at NASA Dryden Flight Research Center.

A survey of the quality of nursing services for brain trauma patients in the emergency wards of hospitals in Guilan Province, Iran (2012).

PubMed

Majidi, Seyed Ali; Ayoubian, Ali; Mardani, Sheida; Hashemidehaghi, Zahra

2014-01-01

Head trauma is the main cause of disabilities and death among young people, and the side effects of head trauma pose some of the greatest medical challenges. Rapid diagnosis and the use of proper treatments can prevent more severe brain damage. The purpose of this research was to determine the quality of nursing services provided to brain trauma patients in hospitals in Guilan Province, Iran. The study was conducted as a descriptive, cross-sectional study in the emergency wards of selected hospitals in Guilan in 2012. The research population was comprised of all the brain trauma patients in these hospitals. We developed a two-section questionnaire, ascertained its validity, and determined that it had a reliability of 88% (Cronbach's alpha). Subsequently, we used the questionnaire for gathering data. The data were analyzed using SPSS statistical software, and descriptive analysis tests (frequency rate and average) and deductive analyses tests (chi-squared) also were used. The results showed that the quality of health services provided to brain-trauma patients in the emergency ward was at the moderate level of 58.8% of the cases and at a low level in 41.2% of the cases. Based on the results that showed that the services were of moderate quality, the staff members in the emergency ward were required to update their knowledge and use the required measures to minimize or prevent side effects in brain-trauma patients; clearly, mastery of such measures was a real need among the emergency ward's staff.

Descriptive Morphology Terms For MAMA software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruggiero, Christy E.; Porter, Reid B.

The table on the following pages lists a set of morphology terms for describing materials. We have organized these terms by categories. Software uses are welcome to suggest other terms that are needed to accurately describe materials. This list is intended as a initial starting point to generating a consensus terminology list.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruiz, Steven Adriel

The following discussion contains a high-level description of methods used to implement software for data processing. It describes the required directory structures and file handling required to use Excel's Visual Basic for Applications programming language and how to identify shot, test and capture types to appropriately process data. It also describes how to interface with the software.

Chips: A Tool for Developing Software Interfaces Interactively.

ERIC Educational Resources Information Center

Cunningham, Robert E.; And Others

This report provides a detailed description of Chips, an interactive tool for developing software employing graphical/computer interfaces on Xerox Lisp machines. It is noted that Chips, which is implemented as a collection of customizable classes, provides the programmer with a rich graphical interface for the creation of rich graphical…

Training the Knowledge Worker: A Descriptive Study of Training Practices in Irish Software Companies.

ERIC Educational Resources Information Center

Acton, Thomas; Golden, Willie

2003-01-01

Employees (n=200) of 39 Irish software companies indicated the following about training practices: organizational commitment to and provision for training was positively associated with employee expectations; well-designed training increased job satisfaction and helped retain organizational knowledge. One-third believed training has not helped…

Training Programs in Applications Software.

ERIC Educational Resources Information Center

Modianos, Doan T.; Cornwell, Larry W.

1988-01-01

Description of training programs for using business applications software highlights implementing programs for Lotus 1-2-3 and dBASE III Plus. The amount of computer experience of the users and the difference in training methods needed are discussed, and the use of a Macintosh computer for producing notes is explained. (LRW)

Desktop Publishing: A Brave New World and Publishing from the Desktop.

ERIC Educational Resources Information Center

Lormand, Robert; Rowe, Jane J.

1988-01-01

The first of two articles presents basic selection criteria for desktop publishing software packages, including discussion of expectations, required equipment, training costs, publication size, desired software features, additional equipment needed, and quality control. The second provides a brief description of desktop publishing using the Apple…

76 FR 66048 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

.... (iii) Description and Quantity or Quantities of Articles or Services under Consideration for Purchase... High Mobility Multi-Purpose Wheeled Vehicles (HMMWVs), 1 lot AN/MPQ- 64F1 SENTINEL Radar software, 290...-Launched Advanced Medium Range Air-to-Air Missile (SL-AMRAAM) software to support Oman's Ground Based Air...

Software verification plan for GCS. [guidance and control software

NASA Technical Reports Server (NTRS)

Dent, Leslie A.; Shagnea, Anita M.; Hayhurst, Kelly J.

1990-01-01

This verification plan is written as part of an experiment designed to study the fundamental characteristics of the software failure process. The experiment will be conducted using several implementations of software that were produced according to industry-standard guidelines, namely the Radio Technical Commission for Aeronautics RTCA/DO-178A guidelines, Software Consideration in Airborne Systems and Equipment Certification, for the development of flight software. This plan fulfills the DO-178A requirements for providing instructions on the testing of each implementation of software. The plan details the verification activities to be performed at each phase in the development process, contains a step by step description of the testing procedures, and discusses all of the tools used throughout the verification process.

Software Design Description for the HYbrid Coordinate Ocean Model (HYCOM), Version 2.2

DTIC Science & Technology

2009-02-12

scalars. J. Phys. Oceanogr. 32: 240–264. Carnes, M., (2002). Data base description for the Generalized Digital Environmental Model ( GDEM -V) (U...Direction FCT Flux-Corrected Transport scheme GDEM Generalized Digital Environmental Model GISS NASA Goddard Institute for Space Studies GRD

The M68HC11 gripper controller software. Thesis

NASA Technical Reports Server (NTRS)

Tsai, Jodi Wei-Duk

1991-01-01

This thesis discusses the development of firmware for the 68HC11 gripper controller. A general description of the software and hardware interfaces is given. The C library interface for the gripper is then described and followed by a detailed discussion of the software architecture of the firmware. A procedure to assemble and download 68HC11 programs is presented in the form of a tutorial. The tools used to implement this environment are then described. Finally, the implementation of the configuration management scheme used to manage all CIRSSE software is presented.

NASA JPL Distributed Systems Technology (DST) Object-Oriented Component Approach for Software Inter-Operability and Reuse

NASA Technical Reports Server (NTRS)

Hall, Laverne; Hung, Chaw-Kwei; Lin, Imin

2000-01-01

The purpose of this paper is to provide a description of NASA JPL Distributed Systems Technology (DST) Section's object-oriented component approach to open inter-operable systems software development and software reuse. It will address what is meant by the terminology object component software, give an overview of the component-based development approach and how it relates to infrastructure support of software architectures and promotes reuse, enumerate on the benefits of this approach, and give examples of application prototypes demonstrating its usage and advantages. Utilization of the object-oriented component technology approach for system development and software reuse will apply to several areas within JPL, and possibly across other NASA Centers.

Software engineering and Ada in design

NASA Technical Reports Server (NTRS)

Oneill, Don

1986-01-01

Modern software engineering promises significant reductions in software costs and improvements in software quality. The Ada language is the focus for these software methodology and tool improvements. The IBM FSD approach, including the software engineering practices that guide the systematic design and development of software products and the management of the software process are examined. The revised Ada design language adaptation is revealed. This four level design methodology is detailed including the purpose of each level, the management strategy that integrates the software design activity with the program milestones, and the technical strategy that maps the Ada constructs to each level of design. A complete description of each design level is provided along with specific design language recording guidelines for each level. Finally, some testimony is offered on education, tools, architecture, and metrics resulting from project use of the four level Ada design language adaptation.

A Comparative Study of the Critical Thinking Skills among the Students of Accounting and Software in the Female Technical and Vocational University in the City of Borojerd

ERIC Educational Resources Information Center

Bagheri, Mahdi; Nowrozi, Reza Ali

2015-01-01

The purpose of this study is to compare the critical thinking skills among the students of accounting and software in the female technical and vocational university in the city of Borojerd. This study is a descriptive-comparative research. The statistical population of this study includes the female students of accounting and software in the…

An Interactive and Automated Software Development Environment.

DTIC Science & Technology

1982-12-01

four levels. Each DFD has an accompanying textual description to aid the reader in understanding the diagram. Both the data flows and the operations...students using the SDW for major software developments. Students in the software engineering courses use the SDW as a pedagogical tool for learning the...the SDWE. For thiz reason, the modified SDWE Algorithmic Design is included as Appendix F. 172 Ui 4.4 Desigin RL the ProQiect Data Baes The Project

Integrated Software Development System/Higher Order Software Conceptual Description (ISDS/HOS)

DTIC Science & Technology

1976-11-01

Structured Flowchart Conventions 270 6.3.5.3 Design Diagram Notation 273 xii HIGHER ORDER SOFTWARE, INC. 843 MASSACHUSETTS AVENUE. CAMBRIDGE, MASSACHUSETTS...associated with the process steps. They also reference other HIPO diagrams as well an non-HIPO documentation such as flowcharts or decision tables of...syntax that is easy to learn and must provide the novice with some prompting to help him avoid classic beginner errors. Desirable editing capabilities

Wildlife software: procedures for publication of computer software

USGS Publications Warehouse

Samuel, M.D.

1990-01-01

Computers and computer software have become an integral part of the practice of wildlife science. Computers now play an important role in teaching, research, and management applications. Because of the specialized nature of wildlife problems, specific computer software is usually required to address a given problem (e.g., home range analysis). This type of software is not usually available from commercial vendors and therefore must be developed by those wildlife professionals with particular skill in computer programming. Current journal publication practices generally prevent a detailed description of computer software associated with new techniques. In addition, peer review of journal articles does not usually include a review of associated computer software. Thus, many wildlife professionals are usually unaware of computer software that would meet their needs or of major improvements in software they commonly use. Indeed most users of wildlife software learn of new programs or important changes only by word of mouth.

A Case Study of Measuring Process Risk for Early Insights into Software Safety

NASA Technical Reports Server (NTRS)

Layman, Lucas; Basili, Victor; Zelkowitz, Marvin V.; Fisher, Karen L.

2011-01-01

In this case study, we examine software safety risk in three flight hardware systems in NASA's Constellation spaceflight program. We applied our Technical and Process Risk Measurement (TPRM) methodology to the Constellation hazard analysis process to quantify the technical and process risks involving software safety in the early design phase of these projects. We analyzed 154 hazard reports and collected metrics to measure the prevalence of software in hazards and the specificity of descriptions of software causes of hazardous conditions. We found that 49-70% of 154 hazardous conditions could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. The application of the TPRM methodology identified process risks in the application of the hazard analysis process itself that may lead to software safety risk.

Computer-Aided Authoring of Programmed Instruction for Teaching Symbol Recognition. Final Report.

ERIC Educational Resources Information Center

Braby, Richard; And Others

This description of AUTHOR, a computer program for the automated authoring of programmed texts designed to teach symbol recognition, includes discussions of the learning strategies incorporated in the design of the instructional materials, hardware description and the algorithm for the software, and current and future developments. Appendices…

Intelligent resource discovery using ontology-based resource profiles

NASA Technical Reports Server (NTRS)

Hughes, J. Steven; Crichton, Dan; Kelly, Sean; Crichton, Jerry; Tran, Thuy

2004-01-01

Successful resource discovery across heterogeneous repositories is strongly dependent on the semantic and syntactic homogeneity of the associated resource descriptions. Ideally, resource descriptions are easily extracted from pre-existing standardized sources, expressed using standard syntactic and semantic structures, and managed and accessed within a distributed, flexible, and scaleable software framework.

Flight Experiment Demonstration System (FEDS) functional description and interface document

NASA Technical Reports Server (NTRS)

Belcher, R. C.; Shank, D. E.

1984-01-01

This document presents a functional description of the Flight Experiment Demonstration System (FEDS) and of interfaces between FEDS and external hardware and software. FEDS is a modification of the Automated Orbit Determination System (AODS). FEDS has been developed to support a ground demonstration of microprocessor-based onboard orbit determination. This document provides an overview of the structure and logic of FEDS and details the various operational procedures to build and execute FEDS. It also documents a microprocessor interface between FEDS and a TDRSS user transponder and describes a software simulator of the interface used in the development and system testing of FEDS.

Methodology for automating software systems

NASA Technical Reports Server (NTRS)

Moseley, Warren

1990-01-01

Applying ITS technology to the shuttle diagnostics would not require the rigor of the Petri Net representation, however it is important in providing the animated simulated portion of the interface and the demands placed on the system to support the training aspects to have a homogeneous and consistent underlying knowledge representation. By keeping the diagnostic rule base, the hardware description, the software description, user profiles, desired behavioral knowledge, and the user interface in the same notation, it is possible to reason about the all of the properties of petri nets, on any selected portion of the simulation. This reasoning provides foundation for utilization of intelligent tutoring systems technology.

Sandia Higher Order Elements (SHOE) v 0.5 alpha

DOE Office of Scientific and Technical Information (OSTI.GOV)

2013-09-24

SHOE is research code for characterizing and visualizing higher-order finite elements; it contains a framework for defining classes of interpolation techniques and element shapes; methods for interpolating triangular, quadrilateral, tetrahedral, and hexahedral cells using Lagrange and Legendre polynomial bases of arbitrary order; methods to decompose each element into domains of constant gradient flow (using a polynomial solver to identify critical points); and an isocontouring technique that uses this decomposition to guarantee topological correctness. Please note that this is an alpha release of research software and that some time has passed since it was actively developed; build- and run-time issues likelymore » exist.« less

Dose-dependent EEG effects of zolpidem provide evidence for GABA(A) receptor subtype selectivity in vivo.

PubMed

Visser, S A G; Wolters, F L C; van der Graaf, P H; Peletier, L A; Danhof, M

2003-03-01

Zolpidem is a nonbenzodiazepine GABA(A) receptor modulator that binds in vitro with high affinity to GABA(A) receptors expressing alpha(1) subunits but with relatively low affinity to receptors expressing alpha(2), alpha(3), and alpha(5) subunits. In the present study, it was investigated whether this subtype selectivity could be detected and quantified in vivo. Three doses (1.25, 5, and 25 mg) of zolpidem were administered to rats in an intravenous infusion over 5 min. The time course of the plasma concentrations was determined in conjunction with the change in the beta-frequency range of the EEG as pharmacodynamic endpoint. The concentration-effect relationship of the three doses showed a dose-dependent maximum effect and a dose-dependent potency. The data were analyzed for one- or two-site binding using two pharmacodynamic models based on 1) the descriptive model and 2) a novel mechanism-based pharmacokinetic/pharmacodynamic (PK/PD) model for GABA(A) receptor modulators that aims to separates drug- and system-specific properties, thereby allowing the estimation of in vivo affinity and efficacy. The application of two-site models significantly improved the fits compared with one-site models. Furthermore, in contrast to the descriptive model, the mechanism-based PK/PD model yielded dose-independent estimates for affinity (97 +/- 40 and 33,100 +/- 14,800 ng x ml(-1)). In conclusion, the mechanism-based PK/PD model is able to describe and explain the observed dose-dependent EEG effects of zolpidem and suggests the subtype selectivity of zolpidem in vivo.

Assault frequency and preformation probability of the {alpha} emission process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, H. F.; Royer, G.; Li, J. Q.

2011-08-15

A study of the assault frequency and preformation factor of the {alpha}-decay description is performed from the experimental {alpha}-decay constant and the penetration probabilities calculated from the generalized liquid-drop model (GLDM) potential barriers. To determine the assault frequency a quantum-mechanical method using a harmonic oscillator is introduced and leads to values of around 10{sup 21} s{sup -1}, similar to the ones calculated within the classical method. The preformation probability is around 10{sup -1}-10{sup -2}. The results for even-even Po isotopes are discussed for illustration. While the assault frequency presents only a shallow minimum in the vicinity of the magic neutronmore » number 126, the preformation factor and mainly the penetrability probability diminish strongly around N=126.« less

Description of a new rare alpha-1 antitrypsin mutation in Naples (Italy): PI*M S-Napoli

PubMed Central

Mosella, Marco; Accardo, Mariasofia; Molino, Antonio; Maniscalco, Mauro; Zamparelli, Alessandro Sanduzzi

2018-01-01

Alpha-1 antitrypsin deficiency is a rare and often underdiagnosed hereditary disorder, which mainly affects the Caucasian population. We report a case of a noncystic fibrosis bronchiectasis patient in the absence of emphysema associated with low serum alpha-1-antitrypsin (AAT) level, in the absence of the most common defective alleles associated with AAT deficiency (PI*S and PI*Z) but with a new mutation in heterozygosis. This mutation is characterized by the substitution in the coding region of exon 3, of a guanine (G) for a thymine (T), generating the replacement of a glutamine (Gln) by a histidine (His) in codon 212 (cod 212 GlnCAG > HisCAT), corresponds to a new S allelic variant. This mutation, never identified before, is called S-Napoli. PMID:29387258

76 FR 33769 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-09

...[alpha]-Targeted Therapy for Diabetes and Obesity Description of Technology: This technology describes... and treatment of diabetes. In obesity, the rapid expansion of adipose tissue outpaces the oxygen... hypoxia in obesity and insulin resistance, investigators at the National Cancer Institute disrupted the...

Utilizing Technology: A Decision To Enhance Instruction.

ERIC Educational Resources Information Center

Vanasco, Lourdes C.

This review of the literature describes a number of ways in which microcomputers are being used to improve instruction. A discussion of types of software being used in instructional settings focuses primarily on the use of word processing programs by both instructors and students in writing. Descriptions of types of computer software that may be…

77 FR 70151 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-23

... defined in Section 47(6) of the Arms Export Control Act. (iii) Description and Quantity or Quantities of.... The sensitivity is primarily in the software programs that instruct the system how to operate in the... Only Memory (ROM) maps, which do not provide the software program itself. The overall hardware is...

78 FR 22850 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... million * As defined in Section 47(6) of the Arms Export Control Act. (iii) Description and Quantity or... software continues to be modified via a pre-planned product improvement (P3I) program in order to improve its counter- countermeasure capabilities. No software source code or algorithms will be released. The...

75 FR 75464 - Notice of Public Information Collection(s) Being Reviewed by the Federal Communications...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... type of switch software) to provide payphone specific coding digits for per-call compensation. The... Information; [cir] RF Exposure Information; [cir] Operational Description; [cir] Cover Letters; [cir] Software Defined Radio/Cognitive Radio Files In general, an applicant's submission is as follows: (a) FCC Form 731...

Man-computer Inactive Data Access System (McIDAS). [design, development, fabrication, and testing

NASA Technical Reports Server (NTRS)

1973-01-01

A technical description is given of the effort to design, develop, fabricate, and test the two dimensional data processing system, McIDAS. The system has three basic sections: an access and data archive section, a control section, and a display section. Areas reported include hardware, system software, and applications software.

40 CFR 721.30 - EPA approval of alternative control measures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... determination of equivalency to EPA under this part must submit the request to EPA via CDX using e-PMN software... to obtain e-PMN software. Support documents related to these requests must be submitted in the manner... submitted. (4) A detailed description of the activities involved. (5) The specifications of the alternative...

Advanced Spacesuit Informatics Software Design for Power, Avionics and Software Version 2.0

NASA Technical Reports Server (NTRS)

Wright, Theodore W.

2016-01-01

A description of the software design for the 2016 edition of the Informatics computer assembly of the NASAs Advanced Extravehicular Mobility Unit (AEMU), also called the Advanced Spacesuit. The Informatics system is an optional part of the spacesuit assembly. It adds a graphical interface for displaying suit status, timelines, procedures, and warning information. It also provides an interface to the suit mounted camera for recording still images, video, and audio field notes.

Laboratory process control using natural language commands from a personal computer

NASA Technical Reports Server (NTRS)

Will, Herbert A.; Mackin, Michael A.

1989-01-01

PC software is described which provides flexible natural language process control capability with an IBM PC or compatible machine. Hardware requirements include the PC, and suitable hardware interfaces to all controlled devices. Software required includes the Microsoft Disk Operating System (MS-DOS) operating system, a PC-based FORTRAN-77 compiler, and user-written device drivers. Instructions for use of the software are given as well as a description of an application of the system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humble, Travis S; Sadlier, Ronald J

We show how to extend the paradigm of software-defined communication to include quantum communication systems. We introduce the decomposition of a quantum communication terminal into layers separating the concerns of the hardware, software, and middleware. We provide detailed descriptions of how each component operates and we include results of an implementation of the super-dense coding protocol. We argue that the versatility of software-defined quantum communication test beds can be useful for exploring new regimes in communication and rapidly prototyping new systems.

2016 Research Outreach Program report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Hye Young; Kim, Yangkyu

2016-10-13

This paper is the research activity report for 4 weeks in LANL. Under the guidance of Dr. Lee, who performs nuclear physics research at LANSCE, LANL, I studied the Low Energy NZ (LENZ) setup and how to use the LENZ. First, I studied the LENZ chamber and Si detectors, and worked on detector calibrations, using the computer software, ROOT (CERN developed data analysis tool) and EXCEL (Microsoft office software). I also performed the calibration experiments that measure alpha particles emitted from a Th-229 source by using a S1-type detector (Si detector). And with Dr. Lee, we checked the result.

PreSSAPro: a software for the prediction of secondary structure by amino acid properties.

PubMed

Costantini, Susan; Colonna, Giovanni; Facchiano, Angelo M

2007-10-01

PreSSAPro is a software, available to the scientific community as a free web service designed to provide predictions of secondary structures starting from the amino acid sequence of a given protein. Predictions are based on our recently published work on the amino acid propensities for secondary structures in either large but not homogeneous protein data sets, as well as in smaller but homogeneous data sets corresponding to protein structural classes, i.e. all-alpha, all-beta, or alpha-beta proteins. Predictions result improved by the use of propensities evaluated for the right protein class. PreSSAPro predicts the secondary structure according to the right protein class, if known, or gives a multiple prediction with reference to the different structural classes. The comparison of these predictions represents a novel tool to evaluate what sequence regions can assume different secondary structures depending on the structural class assignment, in the perspective of identifying proteins able to fold in different conformations. The service is available at the URL http://bioinformatica.isa.cnr.it/PRESSAPRO/.

A precision device needs precise simulation: Software description of the CBM Silicon Tracking System

NASA Astrophysics Data System (ADS)

Malygina, Hanna; Friese, Volker; CBM Collaboration

2017-10-01

Precise modelling of detectors in simulations is the key to the understanding of their performance, which, in turn, is a prerequisite for the proper design choice and, later, for the achievement of valid physics results. In this report, we describe the implementation of the Silicon Tracking System (STS), the main tracking device of the CBM experiment, in the CBM software environment. The STS makes uses of double-sided silicon micro-strip sensors with double metal layers. We present a description of transport and detector response simulation, including all relevant physical effects like charge creation and drift, charge collection, cross-talk and digitization. Of particular importance and novelty is the description of the time behaviour of the detector, since its readout will not be externally triggered but continuous. We also cover some aspects of local reconstruction, which in the CBM case has to be performed in real-time and thus requires high-speed algorithms.

Radiation-induced chromosomal instability in human mammary epithelial cells

NASA Technical Reports Server (NTRS)

Durante, M.; Grossi, G. F.; Yang, T. C.

1996-01-01

Karyotypes of human cells surviving X- and alpha-irradiation have been studied. Human mammary epithelial cells of the immortal, non-tumorigenic cell line H184B5 F5-1 M/10 were irradiated and surviving clones isolated and expanded in culture. Cytogenetic analysis was performed using dedicated software with an image analyzer. We have found that both high- and low-LET radiation induced chromosomal instability in long-term cultures, but with different characteristics. Complex chromosomal rearrangements were observed after X-rays, while chromosome loss predominated after alpha-particles. Deletions were observed in both cases. In clones derived from cells exposed to alpha-particles, some cells showed extensive chromosome breaking and double minutes. Genomic instability was correlated to delayed reproductive death and neoplastic transformation. These results indicate that chromosomal instability is a radiation-quality-dependent effect which could determine late genetic effects, and should therefore be carefully considered in the evaluation of risk for space missions.

Radiation-induced chromosomal instability in human mammary epithelial cells

NASA Astrophysics Data System (ADS)

Durante, M.; Grossi, G. F.; Yang, T. C.

Karyotypes of human cells surviving X- and alpha-irradiation have been studied. Human mammary epithelial cells of the immortal, non-tumorigenic cell line H184B5 F5-1 M/10 were irradiated and surviving clones isolated and expanded in culture. Cytogenetic analysis was performed using dedicated software with an image analyzer. We have found that both high- and low-LET radiation induced chromosomal instability in long-term cultures, but with different characteristics. Complex chromosomal rearrangements were observed after X-rays, while chromosome loss predominated after alpha-particles. Deletions were observed in both cases. In clones derived from cells exposed to alpha-particles, some cells showed extensive chromosome breaking and double minutes. Genomic instability was correlated to delayed reproductive death and neoplastic transformation. These results indicate that chromosomal instability is a radiation-quality-dependent effect which could determine late genetic effects, and should therefore be carefully considered in the evaluation of risk for space missions.

SSE software test management STM capability: Using STM in the Ground Systems Development Environment (GSDE)

NASA Technical Reports Server (NTRS)

Church, Victor E.; Long, D.; Hartenstein, Ray; Perez-Davila, Alfredo

1992-01-01

This report is one of a series discussing configuration management (CM) topics for Space Station ground systems software development. It provides a description of the Software Support Environment (SSE)-developed Software Test Management (STM) capability, and discusses the possible use of this capability for management of developed software during testing performed on target platforms. This is intended to supplement the formal documentation of STM provided by the SEE Project. How STM can be used to integrate contractor CM and formal CM for software before delivery to operations is described. STM provides a level of control that is flexible enough to support integration and debugging, but sufficiently rigorous to insure the integrity of the testing process.

Spontaneous cortical DC-potential shifts: modulation stereotypy; relationships to higher EEG-frequencies.

PubMed

Etlinger, S C; Guttmann, G; Bauer, H

1986-07-01

A description of scalp-recorded, spontaneous, cerebral DC-potential shifts is given independent of other variables (shift stereotypy), in relationship to higher frequencies (theta, alpha 1, alpha 2: 4-13 Hz) and as analyzed pairwise across the median sagittal line (Fz, Cz, Pz) separately according to frequency and condition (relaxation and moderate mental load). Spontaneous DC-shifts are shown to behave unpredictably. Whether measured jointly (up to triads) or as dyad and triad context entropy, the frontal DC-shifts are calculated as being random, whereby their definition as such within the context of the Principle Component Analysis is supported by the analysis of longitudinal registrations. Cross-correlation analysis of the cerebral slow potential's relationship to each of the higher frequencies (theta, alpha 1, alpha 2) reveals it to be highly independent, the highest correlation accounting for merely 11% of the common variance, the average being 9% (R congruent to 0.3). By matching the conjoint activity of the DC-potential between Fz-Cz, Cz-Pz, and Fz-Pz to that of theta, alpha 1, alpha 2 at the same paired sites, the DC-activity is shown to be operating at higher levels of synchronous activity than the higher frequencies, regardless of pairing and/or condition, although the general level of synchronous activity (DC, theta, alpha 1, alpha 2) is remarkably high along the median sagittal line, 75% of the correlation averages of all analysis-pairings being above 0.60.

KAPAO-Alpha: An On-The-Sky Testbed for Adaptive Optics on Small Aperture Telescopes

NASA Astrophysics Data System (ADS)

Morrison, Will; Choi, P. I.; Severson, S. A.; Spjut, E.; Contreras, D. S.; Gilbreth, B. N.; McGonigle, L. P.; Rudy, A. R.; Xue, A.; Baranec, C.; Riddle, R.

2012-05-01

We present initial in-lab and on-sky results of a natural guide star adaptive optics instrument, KAPAO-Alpha, being deployed on Pomona College’s 1-meter telescope at Table Mountain Observatory. The instrument is an engineering prototype designed to help us identify and solve design and integration issues before building KAPAO, a low-cost, dual-band, natural guide star AO system currently in active development and scheduled for first light in 2013. The Alpha system operates at visible wavelengths, employs Shack-Hartmann wavefront sensing, and is assembled entirely from commercially available components that include: off-the-shelf optics, a 140-actuator BMC deformable mirror, a high speed SciMeasure Lil’ Joe camera, and an EMCCD for science image acquisition. Wavefront reconstruction operating at 1-kHz speeds is handled with a consumer-grade computer running custom software adopted from the Robo-AO project. The assembly and integration of the Alpha instrument has been undertaken as a Pomona College undergraduate thesis. As part of the larger KAPAO project, it is supported by the National Science Foundation under Grant No. 0960343.

Integrated Power, Avionics, and Software (iPAS) Space Telecommunications Radio System (STRS) Radio User's Guide -- Advanced Exploration Systems (AES)

NASA Technical Reports Server (NTRS)

Roche, Rigoberto; Shalkhauser, Mary Jo Windmille

2017-01-01

The Integrated Power, Avionics and Software (IPAS) software defined radio (SDR) was implemented on the Reconfigurable, Intelligently-Adaptive Communication System (RAICS) platform, for radio development at NASA Johnson Space Center. Software and hardware description language (HDL) code were delivered by NASA Glenn Research Center for use in the IPAS test bed and for development of their own Space Telecommunications Radio System (STRS) waveforms on the RAICS platform. The purpose of this document is to describe how to setup and operate the IPAS STRS Radio platform with its delivered test waveform.

SIRU development. Volume 3: Software description and program documentation

NASA Technical Reports Server (NTRS)

Oehrle, J.

1973-01-01

The development and initial evaluation of a strapdown inertial reference unit (SIRU) system are discussed. The SIRU configuration is a modular inertial subsystem with hardware and software features that achieve fault tolerant operational capabilities. The SIRU redundant hardware design is formulated about a six gyro and six accelerometer instrument module package. The six axes array provides redundant independent sensing and the symmetry enables the formulation of an optimal software redundant data processing structure with self-contained fault detection and isolation (FDI) capabilities. The basic SIRU software coding system used in the DDP-516 computer is documented.

50 CFR Table 15 to Part 679 - Gear Codes, Descriptions, and Use

Code of Federal Regulations, 2012 CFR

2012-10-01

... following: Alpha gear code NMFS logbooks Electronic check-in/ check-out Use numeric code to complete the following: Numeric gear code IERS eLandings ADF&G COAR NMFS AND ADF&G GEAR CODES Hook-and-line HAL X X 61 X...

50 CFR Table 15 to Part 679 - Gear Codes, Descriptions, and Use

Code of Federal Regulations, 2014 CFR

2014-10-01

... following: Alpha gear code NMFS logbooks Electronic check-in/ check-out Use numeric code to complete the following: Numeric gear code IERS eLandings ADF&G COAR NMFS AND ADF&G GEAR CODES Hook-and-line HAL X X 61 X...

50 CFR Table 15 to Part 679 - Gear Codes, Descriptions, and Use

Code of Federal Regulations, 2013 CFR

2013-10-01

... following: Alpha gear code NMFS logbooks Electronic check-in/ check-out Use numeric code to complete the following: Numeric gear code IERS eLandings ADF&G COAR NMFS AND ADF&G GEAR CODES Hook-and-line HAL X X 61 X...

Critical radius in the organisation of synuclein-alpha interacting protein in living cells

NASA Astrophysics Data System (ADS)

Narayanan, Arjun; Meriin, Anatoli; Sherman, Michael; Cisse, Ibrahim

We report a super-resolution imaging study of protein aggregation in the living cell. Focusing on the aggregation of the Parkinsons's disease linked Synuclein-alpha interacting protein, we found and characterized sub-diffraction aggregates in healthy cells and studied the progression of these aggregates in stressed cells. Our results allowed us to establish the aggregation process as amenable to a simple physical description - the well-established thermodynamics of condensation phenomena. This description turned out to be both robust and useful. Not only did the distribution of aggregate sizes fit exceedingly well to the thermodynamic predictions in all tested conditions, but its evolving shape under pharmacological and genetic perturbations correlated intuitively with predictions from cell biology. The picture emerging from measurements in different genetic and pharmacological states is a view of protein aggregate size distribution as resulting from a non-equilibrium steady state maintained - even in healthy cells - with continuous and concurrent aggregate production and clearance.

A debugger-interpreter with setup facilities for assembly programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dolinskii, I.S.; Zisel`man, I.M.; Belotskii, S.L.

1995-11-01

In this paper a software program allowing one to introduce and debug the descriptions of the von Nuemann architecture processors and their assemblers, efficiently debug assembly programs, and investigate the instruction sets of the described processors is considered. For a description of the processor sematics and assembler syntax, a metassembly language is suggested.

Stereo Orthogonal Axonometric Perspective for the Teaching of Descriptive Geometry

ERIC Educational Resources Information Center

Méxas, José Geraldo Franco; Guedes, Karla Bastos; Tavares, Ronaldo da Silva

2015-01-01

Purpose: The purpose of this paper is to present the development of a software for stereo visualization of geometric solids, applied to the teaching/learning of Descriptive Geometry. Design/methodology/approach: The paper presents the traditional method commonly used in computer graphic stereoscopic vision (implemented in C language) and the…

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

Simulation of CIFF (Centralized IFF) remote control displays

NASA Astrophysics Data System (ADS)

Tucker, D. L.; Leibowitz, L. M.

1986-06-01

This report presents the software simulation of the Remote-Control-Display (RCS) proposed to be used in the Centralized IFF (CIFF) system. A description of the simulation programs along with simulated menu formats are presented. A sample listing of the simulation programs and a brief description of the program operation are also included.

Salivary Alpha-Amylase Correlates with Subjective Heat Pain Perception.

PubMed

Wittwer, Amrei; Krummenacher, Peter; La Marca, Roberto; Ehlert, Ulrike; Folkers, Gerd

2016-06-01

Self-reports of pain are important for an adequate therapy. This is a problem with patients and infants who are restricted in providing an accurate verbal estimation of their pain. Reliable, real-time, economical, and non-invasive physiological correlates might contribute to a more comprehensive description of pain. Salivary alpha-amylase constitutes one candidate biomarker, which reflects predominantly sympathetic nervous system alterations under stressful conditions and can be measured non-invasively. The current study investigated the effects of acute heat pain on salivary alpha-amylase activity. Heat pain tolerance was measured on the non-dominant forearm. Participants completed visual analog scales on pain intensity and unpleasantness. Saliva samples were collected directly after pain induction. Twenty-seven healthy volunteers were recruited for this study. While salivary alpha-amylase levels correlated positively with intensity and unpleasantness ratings in response to acute heat pain stimuli, there was no corresponding association with pain tolerance. Salivary alpha-amylase is suggested to be an indirect physiologic correlate of subjective heat pain perception. Future studies should address the role of salivary alpha-amylase depending on the origin of pain, the concerned tissue, and other pain assessment methods. © 2016 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Piloted Parameter Identification Flight Test Maneuvers for Closed Loop Modeling of the F-18 High Alpha Research Vehicle (HARV)

NASA Technical Reports Server (NTRS)

Morelli, Eugene A.

1996-01-01

Flight test maneuvers are specified for the F-18 High Alpha Research Vehicle (HARV). The maneuvers were designed for closed loop parameter identification purposes, specifically for longitudinal and lateral linear model parameter estimation at 5, 20, 30, 45, and 60 degrees angle of attack, using the NASA 1A control law. Each maneuver is to be realized by the pilot applying square wave inputs to specific pilot station controls. Maneuver descriptions and complete specifications of the time/amplitude points defining each input are included, along with plots of the input time histories.

The CoreWall Project: An Update for 2007

NASA Astrophysics Data System (ADS)

Yu-Chung Chen, J.; Higgins, S.; Hur, H.; Ito, E.; Jenkins, C. J.; Johnson, A.; Leigh, J.; Morin, P.; Lee, J.

2007-12-01

The CoreWall Suite is a NSF-supported collaborative development for a real-time core description (Corelyzer), stratigraphic correlation (Correlater), and data visualization (CoreNavigator) software to be used by the marine, terrestrial and Antarctic science communities. The overall goal of the Corewall software development is to bring portable cross-platform tools to the broader drilling and coring communities to expand and enhance data visualization and enhance collaborative integration of multiple datasets. The CoreWall Project is now in its second year and significant progress has been made on all 3 software components. Corelyzer has undergone 2 field deployments and testing by ANDRILL program in 2006 (and again in Fall 2007) and by ICDP's SAFOD project (summer 2007). In addition, Corewall group and ICDP are working together so that the core description (DIS) system can expose DIS core data directly into Corelyzer seamlessly and be available to future ICDP and IODP-Mission Specific Platform expeditions. Educators have also taken note of the software's ease of use and strong visualization capabilities to begin exploring curriculum projects with Corelyzer software. To ensure that the software development is integrated with other community IT activities the development of the U.S. IODP-Phase 2 Scientific Ocean Drilling Vessel (SODV), a Steering Committee was constituted. It is composed of key U.S. IODP and related database (e.g., CHRONOS, SedDB) developers and users as well as representatives of other core-based enterprises (e.g., ANDRILL, ICDP, LacCore). Corelyzer (CoreWall's main visual core description tool) software displays digital core images from one or more cores along with discrete data streams (eg. physical properties, downhole logs) and nested images (eg. thin sections, fossils) to provide a robust approach to the description of sediment cores. Corelyzer's digital image handling allows the cores to be viewed from micron to km scale determined by the image resolution along a sliding plane, effectively making it a "digital microscope". Detailed features such as lithologic variation, macroscopic grain size variation, bioturbation intensity, chemical composition and micropaleontology are easier to interpret and annotate. Significant new capabilities have been added to allow for importing multiple images and data types, sharing/exporting Corelyzer "work sessions" for multiple users, enhanced annotations, as well as support for other activities like examining clasts, and sample requests. The new Correlator software, the updated version of Splicer/Sagan software used by ODP for over 10 years, has been ported into a single new analysis tool that will work across multiple platforms and interact seamlessly with both JANUS (ODP's relational database), CHRONOS, PetDB, SedDB, dbSEABED and other databases. This functionality will result in a CoreWall Suite module that can be used and distributed anywhere for stratigraphic and age correlation tasks. CoreNavigator, a spatial data discovery tool, has taken on a virtual Globe interface that allows users to enter Corelyzer from a geographic-visual standpoint.

Development of NASA's Space Communications and Navigation Test Bed Aboard ISS to Investigate SDR, On-Board Networking and Navigation Technologies

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Kacpura, Thomas J.; Johnson, Sandra K.; Lux, James P.

2010-01-01

NASA is developing an experimental flight payload (referred to as the Space Communication and Navigation (SCAN) Test Bed) to investigate software defined radio (SDR), networking, and navigation technologies, operationally in the space environment. The payload consists of three software defined radios each compliant to NASA s Space Telecommunications Radio System Architecture, a common software interface description standard for software defined radios. The software defined radios are new technology developments underway by NASA and industry partners. Planned for launch in early 2012, the payload will be externally mounted to the International Space Station truss and conduct experiments representative of future mission capability.

Description of the GMAO OSSE for Weather Analysis Software Package: Version 3

NASA Technical Reports Server (NTRS)

Koster, Randal D. (Editor); Errico, Ronald M.; Prive, Nikki C.; Carvalho, David; Sienkiewicz, Meta; El Akkraoui, Amal; Guo, Jing; Todling, Ricardo; McCarty, Will; Putman, William M.;

Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

DTIC Science & Technology

1981-02-01

1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

Computer-assisted design of flux-cored wires

NASA Astrophysics Data System (ADS)

Dubtsov, Yu N.; Zorin, I. V.; Sokolov, G. N.; Antonov, A. A.; Artem'ev, A. A.; Lysak, V. I.

2017-02-01

The algorithm and description of the AlMe-WireLaB software for the computer-assisted design of flux-cored wires are introduced. The software functionality is illustrated with the selection of the components for the flux-cored wire, ensuring the acquisition of the deposited metal of the Fe-Cr-C-Mo-Ni-Ti-B system. It is demonstrated that the developed software enables the technologically reliable flux-cored wire to be designed for surfacing, resulting in a metal of an ordered composition.

A Talking Computers System for Persons with Vision and Speech Handicaps. Final Report.

ERIC Educational Resources Information Center

Visek & Maggs, Urbana, IL.

This final report contains a detailed description of six software systems designed to assist individuals with blindness and/or speech disorders in using inexpensive, off-the-shelf computers rather than expensive custom-made devices. The developed software is not written in the native machine language of any particular brand of computer, but in the…

A Requirements-Based Exploration of Open-Source Software Development Projects--Towards a Natural Language Processing Software Analysis Framework

ERIC Educational Resources Information Center

Vlas, Radu Eduard

2012-01-01

Open source projects do have requirements; they are, however, mostly informal, text descriptions found in requests, forums, and other correspondence. Understanding such requirements provides insight into the nature of open source projects. Unfortunately, manual analysis of natural language requirements is time-consuming, and for large projects,…

Developing a Taxonomy of Characteristics and Features of Collaboration Tools for Teams in Distributed Environments

DTIC Science & Technology

2007-09-01

Motion URL: http://www.blackberry.com/products/blackberry/index.shtml Software Name: Bricolage Company: Bricolage URL: http://www.bricolage.cc...Workflow Customizable control over editorial content. Bricolage Bricolage Feature Description Software Company Workflow Allows development...content for Nuxeo Collaborative Portal projects. Nuxeo Workspace Add, edit, delete, content through web interface. Bricolage Bricolage

Report on a Knowledge-Based Software Assistant.

DTIC Science & Technology

1983-08-01

maintainers, project managers , and end-users). In this paradigm, software activities, including definition, management , and validation will be...project management . This report also presents a plan for the development of the KBSA, along with a description of the necessary supporting technology...Activity Coordination .. .. .. ..... ...... ..... .... 19 3.2 Project Management and Documentation. .. ... ........ 20 3.2.1 Project Management Facet

Employees' Perception of Learning New Software from Customized Training Materials

ERIC Educational Resources Information Center

Dean, Kristi L.

2010-01-01

The purpose of this research is to conduct a descriptive survey research study that will look at the value of using customized training materials to train employees to learn how to use software. The data will be repeatedly compared; ensuring the design of the research and the corresponding data collection method provides a panoramic and…

Evaluation of Automated Fracture Risk Assessment Based on the Canadian Association of Radiologists and Osteoporosis Canada Assessment Tool.

PubMed

Allin, Sonya; Bleakney, Robert; Zhang, Julie; Munce, Sarah; Cheung, Angela M; Jaglal, Susan

2016-01-01

Fracture risk assessments are not always clearly communicated on bone mineral density (BMD) reports; evidence suggests that structured reporting (SR) tools may improve report clarity. The aim of this study is to compare fracture risk assessments automatically assigned by SR software in accordance with Canadian Association of Radiologists and Osteoporosis Canada (CAROC) recommendations to assessments from experts on narrative BMD reports. Charts for 500 adult patients who recently received a BMD exam were sampled from across University of Toronto's Joint Department of Medical Imaging. BMD measures and clinical details were manually abstracted from charts and were used to create structured reports with assessments generated by a software implementation of CAROC recommendations. CAROC calculations were statistically compared to experts' original assessments using percentage agreement (PA) and Krippendorff's alpha. Canadian FRAX calculations were also compared to experts', where possible. A total of 25 (5.0%) reported assessments did not conform to categorizations recommended by Canadian guidelines. Across the remainder, the Krippendorff's alpha relating software assigned assessments to physicians was high at 0.918; PA was 94.3%. Lower agreement was associated with reports for patients with documented modifying factors (alpha = 0.860, PA = 90.2%). Similar patterns of agreement related expert assessments to FRAX calculations, although statistics of agreement were lower. Categories of disagreement were defined by (1) gray areas in current guidelines, (2) margins of assessment categorizations, (3) dictation/transcription errors, (4) patients on low doses of steroids, and (5) ambiguous documentation of modifying factors. Results suggest that SR software can produce fracture risk assessments that agree with experts on most routine, adult BMD exams. Results also highlight situations where experts tend to diverge from guidelines and illustrate the potential for SR software to (1) reduce variability in, (2) ameliorate errors in, and (3) improve clarity of routine adult BMD exam reports. Copyright © 2016 International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

Development of structural model of adaptive training complex in ergatic systems for professional use

NASA Astrophysics Data System (ADS)

Obukhov, A. D.; Dedov, D. L.; Arkhipov, A. E.

2018-03-01

The article considers the structural model of the adaptive training complex (ATC), which reflects the interrelations between the hardware, software and mathematical model of ATC and describes the processes in this subject area. The description of the main components of software and hardware complex, their interaction and functioning within the common system are given. Also the article scrutinizers a brief description of mathematical models of personnel activity, a technical system and influences, the interactions of which formalize the regularities of ATC functioning. The studies of main objects of training complexes and connections between them will make it possible to realize practical implementation of ATC in ergatic systems for professional use.

Downsizer - A Graphical User Interface-Based Application for Browsing, Acquiring, and Formatting Time-Series Data for Hydrologic Modeling

USGS Publications Warehouse

Ward-Garrison, Christian; Markstrom, Steven L.; Hay, Lauren E.

2009-01-01

The U.S. Geological Survey Downsizer is a computer application that selects, downloads, verifies, and formats station-based time-series data for environmental-resource models, particularly the Precipitation-Runoff Modeling System. Downsizer implements the client-server software architecture. The client presents a map-based, graphical user interface that is intuitive to modelers; the server provides streamflow and climate time-series data from over 40,000 measurement stations across the United States. This report is the Downsizer user's manual and provides (1) an overview of the software design, (2) installation instructions, (3) a description of the graphical user interface, (4) a description of selected output files, and (5) troubleshooting information.

The Hidden Job Requirements for a Software Engineer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marinovici, Maria C.; Kirkham, Harold; Glass, Kevin A.

In a world increasingly operated by computers, where innovation depends on software, the software engineer’s role is changing continuously and gaining new dimensions. In commercial software development as well as scientific research environments, the way software developers are perceived is changing, because they are more important to the business than ever before. Nowadays, their job requires skills extending beyond the regular job description posted by HR, and more is expected. To advance and thrive in their new roles, the software engineers must embrace change, and practice the themes of the new era (integration, collaboration and optimization). The challenges may bemore » somehow intimidating for freshly graduated software engineers. Through this paper the authors hope to set them on a path for success, by helping them relinquish their fear of the unknown.« less

A model-based approach for automated in vitro cell tracking and chemotaxis analyses.

PubMed

Debeir, Olivier; Camby, Isabelle; Kiss, Robert; Van Ham, Philippe; Decaestecker, Christine

2004-07-01

Chemotaxis may be studied in two main ways: 1) counting cells passing through an insert (e.g., using Boyden chambers), and 2) directly observing cell cultures (e.g., using Dunn chambers), both in response to stationary concentration gradients. This article promotes the use of Dunn chambers and in vitro cell-tracking, achieved by video microscopy coupled with automatic image analysis software, in order to extract quantitative and qualitative measurements characterizing the response of cells to a diffusible chemical agent. Previously, we set up a videomicroscopy system coupled with image analysis software that was able to compute cell trajectories from in vitro cell cultures. In the present study, we are introducing a new software increasing the application field of this system to chemotaxis studies. This software is based on an adapted version of the active contour methodology, enabling each cell to be efficiently tracked for hours and resulting in detailed descriptions of individual cell trajectories. The major advantages of this method come from an improved robustness with respect to variability in cell morphologies between different cell lines and dynamical changes in cell shape during cell migration. Moreover, the software includes a very small number of parameters which do not require overly sensitive tuning. Finally, the running time of the software is very short, allowing improved possibilities in acquisition frequency and, consequently, improved descriptions of complex cell trajectories, i.e. trajectories including cell division and cell crossing. We validated this software on several artificial and real cell culture experiments in Dunn chambers also including comparisons with manual (human-controlled) analyses. We developed new software and data analysis tools for automated cell tracking which enable cell chemotaxis to be efficiently analyzed. Copyright 2004 Wiley-Liss, Inc.

Simulation of double layers in a model auroral circuit with nonlinear impedance

NASA Technical Reports Server (NTRS)

Smith, R. A.

1986-01-01

A reduced circuit description of the U-shaped potential structure of a discrete auroral arc, consisting of the flank transmission line plus parallel-electric-field region, is used to provide the boundary condition for one-dimensional simulations of the double-layer evolution. The model yields asymptotic scalings of the double-layer potential, as a function of an anomalous transport coefficient alpha and of the perpendicular length scale l(a) of the arc. The arc potential phi(DL) scales approximately linearly with alpha, and for alpha fixed phi (DL) about l(a) to the z power. Using parameters appropriate to the auroral zone acceleration region, potentials of phi (DPL) 10 kV scale to projected ionospheric dimensions of about 1 km, with power flows of the order of magnitude of substorm dissipation rates.

Software product description

NASA Technical Reports Server (NTRS)

1991-01-01

An overview of the MultiNet system is presented. Services, supported configurations, remote printer services, netstat, netcontrol, DECnet interoperability services, and programming libraries are briefly described.

Navy Health Care Strategic Planning Process: A Draft Functional Description

DTIC Science & Technology

1993-09-01

56 a. Equipment Environment ................................................... 56...b. Support Software Environment .............................................. 56 c. Communications Requirements... Environment .................................................................. 73 a. AIS Equipment Environment

ScoreRel CI: An Excel Program for Computing Confidence Intervals for Commonly Used Score Reliability Coefficients

ERIC Educational Resources Information Center

Barnette, J. Jackson

2005-01-01

An Excel program developed to assist researchers in the determination and presentation of confidence intervals around commonly used score reliability coefficients is described. The software includes programs to determine confidence intervals for Cronbachs alpha, Pearson r-based coefficients such as those used in test-retest and alternate forms…

Prestimulus neural oscillations inhibit visual perception via modulation of response gain.

PubMed

Chaumon, Maximilien; Busch, Niko A

2014-11-01

The ongoing state of the brain radically affects how it processes sensory information. How does this ongoing brain activity interact with the processing of external stimuli? Spontaneous oscillations in the alpha range are thought to inhibit sensory processing, but little is known about the psychophysical mechanisms of this inhibition. We recorded ongoing brain activity with EEG while human observers performed a visual detection task with stimuli of different contrast intensities. To move beyond qualitative description, we formally compared psychometric functions obtained under different levels of ongoing alpha power and evaluated the inhibitory effect of ongoing alpha oscillations in terms of contrast or response gain models. This procedure opens the way to understanding the actual functional mechanisms by which ongoing brain activity affects visual performance. We found that strong prestimulus occipital alpha oscillations-but not more anterior mu oscillations-reduce performance most strongly for stimuli of the highest intensities tested. This inhibitory effect is best explained by a divisive reduction of response gain. Ongoing occipital alpha oscillations thus reflect changes in the visual system's input/output transformation that are independent of the sensory input to the system. They selectively scale the system's response, rather than change its sensitivity to sensory information.

Operational Based Vision Assessment Automated Vision Test Collection User Guide

DTIC Science & Technology

2017-05-15

repeatability to support correlation analysis. The AVT research grade tests also support interservice, international, industry, and academic partnerships...software, provides information concerning various menu options and operation of the test, and provides a brief description of each of the automated vision...2802, 6 Jun 2017. TABLE OF CONTENTS (concluded) Section Page 7.0 OBVA VISION TEST DESCRIPTIONS

The evaluation of reproductive health PhD program in Iran: The input indicators analysis.

PubMed

AbdiShahshahani, Mahshid; Ehsanpour, Soheila; Yamani, Nikoo; Kohan, Shahnaz

2014-11-01

Appropriate quality achievement of a PhD program requires frequent assessment and discovering the shortcomings in the program. Inputs, which are important elements of the curriculum, are frequently missed in evaluations. The purpose of this study was to evaluate the input indicators of reproductive health PhD program in Iran based on the Context, Input, Process, and Product (CIPP) evaluation model. This is a descriptive and evaluative study based on the CIPP evaluation model. It was conducted in 2013 in four Iranian schools of nursing and midwifery of medical sciences universities. Statistical population consisted of four groups: heads of departments (n = 5), faculty members (n = 18), graduates (n = 12), and PhD students of reproductive health (n = 54). Data collection tools were five separate questionnaires including 37 indicators that were developed by the researcher. Content and face validity were evaluated based on the experts' indications. The Cronbach's alpha coefficient was calculated in order to obtain the reliability of the questionnaires. Collected data were analyzed by SPSS software. Data were analyzed by descriptive statistics (mean, frequency, percentage, and standard deviation), and one-way analysis of variance (ANOVA) and least significant difference (LSD) post hoc tests to compare means between groups. The results of the study indicated that the highest percentage of the heads of departments (80%), graduates (66.7%), and students (68.5%) evaluated the status of input indicators of reproductive health PhD program as relatively appropriate, while most of the faculties (66.7%) evaluated that as appropriate. It is suggested to explore the reasons for relatively appropriate evaluation of input indicators by further academic researches and improve the reproductive health PhD program accordingly.

Identification and Analysis of Labor Productivity Components Based on ACHIEVE Model (Case Study: Staff of Kermanshah University of Medical Sciences)

PubMed Central

Ziapour, Arash; Khatony, Alireza; Kianipour, Neda; Jafary, Faranak

2015-01-01

Identification and analysis of the components of labor productivity based on ACHIEVE model was performed among employees in different parts of Kermanshah University of Medical Sciences in 2014. This was a descriptive correlational study in which the population consisted of 270 working personnel in different administrative groups (contractual, fixed- term and regular) at Kermanshah University of Medical Sciences (872 people) that were selected among 872 people through stratified random sampling method based on Krejcie and Morgan sampling table. The survey tool included labor productivity questionnaire of ACHIEVE. Questionnaires were confirmed in terms of content and face validity, and their reliability was calculated using Cronbach’s alpha coefficient. The data were analyzed by SPSS-18 software using descriptive and inferential statistics. The mean scores for labor productivity dimensions of the employees, including environment (environmental fit), evaluation (training and performance feedback), validity (valid and legal exercise of personnel), incentive (motivation or desire), help (organizational support), clarity (role perception or understanding), ability (knowledge and skills) variables and total labor productivity were 4.10±0.630, 3.99±0.568, 3.97±0.607, 3.76±0.701, 3.63±0.746, 3.59±0.777, 3.49±0.882 and 26.54±4.347, respectively. Also, the results indicated that the seven factors of environment, performance assessment, validity, motivation, organizational support, clarity, and ability were effective in increasing labor productivity. The analysis of the current status of university staff in the employees’ viewpoint suggested that the two factors of environment and evaluation, which had the greatest impact on labor productivity in the viewpoint of the staff, were in a favorable condition and needed to be further taken into consideration by authorities. PMID:25560364

Identification and analysis of labor productivity components based on ACHIEVE model (case study: staff of Kermanshah University of Medical Sciences).

PubMed

Ziapour, Arash; Khatony, Alireza; Kianipour, Neda; Jafary, Faranak

2014-12-15

Identification and analysis of the components of labor productivity based on ACHIEVE model was performed among employees in different parts of Kermanshah University of Medical Sciences in 2014. This was a descriptive correlational study in which the population consisted of 270 working personnel in different administrative groups (contractual, fixed- term and regular) at Kermanshah University of Medical Sciences (872 people) that were selected among 872 people through stratified random sampling method based on Krejcie and Morgan sampling table. The survey tool included labor productivity questionnaire of ACHIEVE. Questionnaires were confirmed in terms of content and face validity, and their reliability was calculated using Cronbach's alpha coefficient. The data were analyzed by SPSS-18 software using descriptive and inferential statistics. The mean scores for labor productivity dimensions of the employees, including environment (environmental fit), evaluation (training and performance feedback), validity (valid and legal exercise of personnel), incentive (motivation or desire), help (organizational support), clarity (role perception or understanding), ability (knowledge and skills) variables and total labor productivity were 4.10±0.630, 3.99±0.568, 3.97±0.607, 3.76±0.701, 3.63±0.746, 3.59±0.777, 3.49±0.882 and 26.54±4.347, respectively. Also, the results indicated that the seven factors of environment, performance assessment, validity, motivation, organizational support, clarity, and ability were effective in increasing labor productivity. The analysis of the current status of university staff in the employees' viewpoint suggested that the two factors of environment and evaluation, which had the greatest impact on labor productivity in the viewpoint of the staff, were in a favorable condition and needed to be further taken into consideration by authorities.

78 FR 78347 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

..., 2013 Triennial Market Power Analysis of SGOC Southwest MBR Sellers for the Southwest Region. Filed Date... Numbers: ER14-630-000. Applicants: AlphaGen Power LLC. Description: Market-based rate application to be... Notice of succession-- Reactive Power Tariff to be effective 3/1/2014. Filed Date: 12/16/13. Accession...

Geochemical Exploration of the Moon.

ERIC Educational Resources Information Center

Adler, Isidore

1984-01-01

Provides information based on explorations of the Apollo program about the geochemistry of the moon and its importance in developing an understanding of formation/evolution of the solar system. Includes description and some results of orbital remote sensing, lunar x-ray experiments, gamma-ray experiments, alpha-particle experiments, and the Apollo…

Descriptive Statistical Attributes of Special Education Data Sets

ERIC Educational Resources Information Center

Felder, Valerie

2013-01-01

Micceri (1989) examined the distributional characteristics of 440 large-sample achievement and psychometric measures. All the distributions were found to be nonnormal at alpha = 0.01. Micceri indicated three factors that might contribute to a non-Gaussian error distribution in the population. The first factor is subpopulations within a target…

College Choice in the Philippines

ERIC Educational Resources Information Center

Tan, Christine Joy

2009-01-01

This descriptive and correlational study examined the applicability of major U.S. college choice factors to Philippine high school seniors. A sample of 226 students from a private school in Manila completed the College Choice Survey for High School Seniors. Cronbach's alpha for the survey composite index was 0.933. The purposes of this…

Origin and Effect of Alpha 2.2 Acetobacteraceae in Honey Bee Larvae and Description of Parasaccharibacter apium gen. nov., sp. nov.

PubMed Central

Snyder, Lucy A.; Schwan, Melissa R.; Maes, Patrick; McFrederick, Quinn S.; Anderson, Kirk E.

2014-01-01

The honey bee hive environment contains a rich microbial community that differs according to niche. Acetobacteraceae Alpha 2.2 (Alpha 2.2) bacteria are present in the food stores, the forager crop, and larvae but at negligible levels in the nurse and forager midgut and hindgut. We first sought to determine the source of Alpha 2.2 in young larvae by assaying the diversity of microbes in nurse crops, hypopharyngeal glands (HGs), and royal jelly (RJ). Amplicon-based pyrosequencing showed that Alpha 2.2 bacteria occupy each of these environments along with a variety of other bacteria, including Lactobacillus kunkeei. RJ and the crop contained fewer bacteria than the HGs, suggesting that these tissues are rather selective environments. Phylogenetic analyses showed that honey bee-derived Alpha 2.2 bacteria are specific to bees that “nurse” the hive's developing brood with HG secretions and are distinct from the Saccharibacter-type bacteria found in bees that provision their young differently, such as with a pollen ball coated in crop-derived contents. Acetobacteraceae can form symbiotic relationships with insects, so we next tested whether Alpha 2.2 increased larval fitness. We cultured 44 Alpha 2.2 strains from young larvae that grouped into nine distinct clades. Three isolates from these nine clades flourished in royal jelly, and one isolate increased larval survival in vitro. We conclude that Alpha 2.2 bacteria are not gut bacteria but are prolific in the crop-HG-RJ-larva niche, passed to the developing brood through nurse worker feeding behavior. We propose the name Parasaccharibacter apium for this bacterial symbiont of bees in the genus Apis. PMID:25239902

Software Cost Estimation Using a Decision Graph Process: A Knowledge Engineering Approach

NASA Technical Reports Server (NTRS)

Stukes, Sherry; Spagnuolo, John, Jr.

2011-01-01

This paper is not a description per se of the efforts by two software cost analysts. Rather, it is an outline of the methodology used for FSW cost analysis presented in a form that would serve as a foundation upon which others may gain insight into how to perform FSW cost analyses for their own problems at hand.

Emissivity of Rocket Plume Particulates

DTIC Science & Technology

1992-09-01

V. EXPERIMENTAL RESULTS ........ ............... 29 VI. CONCLUSIONS AND RECOMMENDATIONS .... ........ 32 APPENDIX A. CATS -E SOFTWARE...interfaced through the CATS E Thermal Analysis software, which is MS-DOS based, and can be run on any 28b or higher CPU. This system allows real-time...body source to establish the parameters required by the CATS program for proper microscope/scanner interface. A complete description of microscope

Automated Coding Software: Development and Use to Enhance Anti-Fraud Activities*

PubMed Central

Garvin, Jennifer H.; Watzlaf, Valerie; Moeini, Sohrab

2006-01-01

This descriptive research project identified characteristics of automated coding systems that have the potential to detect improper coding and to minimize improper or fraudulent coding practices in the setting of automated coding used with the electronic health record (EHR). Recommendations were also developed for software developers and users of coding products to maximize anti-fraud practices. PMID:17238546

User Manual for the Data-Series Interface of the Gr Application Software

USGS Publications Warehouse

Donovan, John M.

2009-01-01

This manual describes the data-series interface for the Gr Application software. Basic tasks such as plotting, editing, manipulating, and printing data series are presented. The properties of the various types of data objects and graphical objects used within the application, and the relationships between them also are presented. Descriptions of compatible data-series file formats are provided.

Space Shuttle Usage of z/OS

NASA Technical Reports Server (NTRS)

Green, Jan

2009-01-01

This viewgraph presentation gives a detailed description of the avionics associated with the Space Shuttle's data processing system and its usage of z/OS. The contents include: 1) Mission, Products, and Customers; 2) Facility Overview; 3) Shuttle Data Processing System; 4) Languages and Compilers; 5) Application Tools; 6) Shuttle Flight Software Simulator; 7) Software Development and Build Tools; and 8) Fun Facts and Acronyms.

IBIS integrated biological imaging system: electron micrograph image-processing software running on Unix workstations.

PubMed

Flifla, M J; Garreau, M; Rolland, J P; Coatrieux, J L; Thomas, D

1992-12-01

'IBIS' is a set of computer programs concerned with the processing of electron micrographs, with particular emphasis on the requirements for structural analyses of biological macromolecules. The software is written in FORTRAN 77 and runs on Unix workstations. A description of the various functions and the implementation mode is given. Some examples illustrate the user interface.

Investigating the Impact of Concept Mapping Software on Greek Students with Attention Deficit (AD)

ERIC Educational Resources Information Center

Riga, Asimina; Papayiannis, Nikolaos

2015-01-01

The present study investigates if there is a positive effect of the use of concept mapping software on students with Attention Deficit (AD) when learning descriptive writing in the secondary level of education. It also examines what kind of difficulties AD students may have come across during this learning procedure. Sample students were selected…

Software Capability Evaluation Version 2.0 Method Description

DTIC Science & Technology

1994-06-01

These criteria are discussed below; they include training, team composition, team leadership , team member experience and knowledge, individual...previous SCEs. No more than one team member should have less than two years of professional software experience. 3 Leadership . Ideally, the team leader...features: e leadership - the assignment of responsibility the presence of sponsorship. * organizational policies - there are written po! ;goveming the

Spectrophotometer-Integrating-Sphere System for Computing Solar Absorptance

NASA Technical Reports Server (NTRS)

Witte, William G., Jr.; Slemp, Wayne S.; Perry, John E., Jr.

1991-01-01

A commercially available ultraviolet, visible, near-infrared spectrophotometer was modified to utilize an 8-inch-diameter modified Edwards-type integrated sphere. Software was written so that the reflectance spectra could be used to obtain solar absorptance values of 1-inch-diameter specimens. A descriptions of the system, spectral reflectance, and software for calculation of solar absorptance from reflectance data are presented.

Towards an Interoperability Ontology for Software Development Tools

DTIC Science & Technology

2003-03-01

The description of feature models was tied to the introduction of the Feature-Oriented Domain Analysis ( FODA *) [KANG90] approach in the late eighties...Feature-oriented domain analysis ( FODA ) is a domain analysis method developed at the Software...ese obstacles was to construct a “pilot” ontology that is extensible. We applied the Feature-Oriented Domain Analysis approach to capture the

State Analysis Database Tool

NASA Technical Reports Server (NTRS)

Rasmussen, Robert; Bennett, Matthew

2006-01-01

The State Analysis Database Tool software establishes a productive environment for collaboration among software and system engineers engaged in the development of complex interacting systems. The tool embodies State Analysis, a model-based system engineering methodology founded on a state-based control architecture (see figure). A state represents a momentary condition of an evolving system, and a model may describe how a state evolves and is affected by other states. The State Analysis methodology is a process for capturing system and software requirements in the form of explicit models and states, and defining goal-based operational plans consistent with the models. Requirements, models, and operational concerns have traditionally been documented in a variety of system engineering artifacts that address different aspects of a mission s lifecycle. In State Analysis, requirements, models, and operations information are State Analysis artifacts that are consistent and stored in a State Analysis Database. The tool includes a back-end database, a multi-platform front-end client, and Web-based administrative functions. The tool is structured to prompt an engineer to follow the State Analysis methodology, to encourage state discovery and model description, and to make software requirements and operations plans consistent with model descriptions.

Naturally Occurring Asbestos in Washington State: Swift Creek at the Intersection of Science, Law, and Risk Perception

NASA Astrophysics Data System (ADS)

Melious, J. O.

2012-12-01

In the northwestern corner of Washington state, a large landslide on Sumas Mountain deposits more than 100,000 cubic yards of soil containing asbestos fibers and heavy metals into Swift Creek every year. Engineers predict that asbestos-laden soils will slide into Swift Creek for at least the next 400 years. Swift Creek joins the Sumas River, which crosses the border into Canada, serving as an international delivery system for asbestos-laden soils. When the rivers flood, as happens regularly, they deliver asbestos into field, yards, and basements. The tools available to address the Swift Creek situation are at odds with the scope and nature of the problem. Asbestos regulation primarily addresses occupational settings, where exposures can be estimated. Hazardous waste regulation primarily addresses liability for abandoned waste products from human activities. Health and environmental issues relating to naturally occurring asbestos (NOA) are fundamentally different from either regulatory scheme. Liability is not a logical lever for a naturally occurring substance, the existence of which is nobody's fault, and exposures to NOA in the environment do not necessarily resemble occupational exposures. The gaps and flaws in the legal regime exacerbate the uncertainties created by uncertainties in the science. Once it is assumed that no level of exposure is safe, legal requirements adopted in very different contexts foreclose the options for addressing the Swift Creek problem. This presentation will outline the applicable laws and how they intersect with issues of risk perception, uncertainty and politics in efforts to address the Swift Creek NOA site.

The Development of a Dynamic Geomagnetic Cutoff Rigidity Model for the International Space Station

NASA Technical Reports Server (NTRS)

Smart, D. F.; Shea, M. A.

1999-01-01

We have developed a computer model of geomagnetic vertical cutoffs applicable to the orbit of the International Space Station. This model accounts for the change in geomagnetic cutoff rigidity as a function of geomagnetic activity level. This model was delivered to NASA Johnson Space Center in July 1999 and tested on the Space Radiation Analysis Group DEC-Alpha computer system to ensure that it will properly interface with other software currently used at NASA JSC. The software was designed for ease of being upgraded as other improved models of geomagnetic cutoff as a function of magnetic activity are developed.

Computer output microfilm (FR80) systems software documentation, volume 2

NASA Technical Reports Server (NTRS)

1975-01-01

The system consists of a series of programs which convert digital data from magnetic tapes into alpha-numeric characters, graphic plots, and imagery that is recorded on the face of a cathode ray tube. A special camera photographs the face of the tube on microfilm for subsequent display on a film reader. The applicable documents which apply to this system are delineated. The functional relationship between the system software, the standard insert routines, and the applications programs is described; all the applications programs are described in detail. Instructions for locating those documents are presented along with test preparations sheets for all baseline and/or program modification acceptance tests.

Mission planning, mission analysis and software formulation. Level C requirements for the shuttle mission control center orbital guidance software

NASA Technical Reports Server (NTRS)

Langston, L. J.

1976-01-01

The formulation of Level C requirements for guidance software was reported. Requirements for a PEG supervisor which controls all input/output interfaces with other processors and determines which PEG mode is to be utilized were studied in detail. A description of the two guidance modes for which Level C requirements have been formulated was presented. Functions required for proper execution of the guidance software were defined. The requirements for a navigation function that is used in the prediction logic of PEG mode 4 were discussed. It is concluded that this function is extracted from the current navigation FSSR.

Open-source meteor detection software for low-cost single-board computers

NASA Astrophysics Data System (ADS)

Vida, D.; Zubović, D.; Šegon, D.; Gural, P.; Cupec, R.

2016-01-01

This work aims to overcome the current price threshold of meteor stations which can sometimes deter meteor enthusiasts from owning one. In recent years small card-sized computers became widely available and are used for numerous applications. To utilize such computers for meteor work, software which can run on them is needed. In this paper we present a detailed description of newly-developed open-source software for fireball and meteor detection optimized for running on low-cost single board computers. Furthermore, an update on the development of automated open-source software which will handle video capture, fireball and meteor detection, astrometry and photometry is given.

DbMap: improving database interoperability issues in medical software using a simple, Java-Xml based solution.

PubMed Central

Karadimas, H.; Hemery, F.; Roland, P.; Lepage, E.

2000-01-01

In medical software development, the use of databases plays a central role. However, most of the databases have heterogeneous encoding and data models. To deal with these variations in the application code directly is error-prone and reduces the potential reuse of the produced software. Several approaches to overcome these limitations have been proposed in the medical database literature, which will be presented. We present a simple solution, based on a Java library, and a central Metadata description file in XML. This development approach presents several benefits in software design and development cycles, the main one being the simplicity in maintenance. PMID:11079915

AIDPRF/PRFAID user's manual

NASA Technical Reports Server (NTRS)

Buck, C. H.

1975-01-01

The program documentation for the PRF ARTWORK/AIDS conversion program, which serves as the interface between the outputs of the PRF ARTWORK and AIDS programs, was presented. The document has a two-fold purpose, the first of which is a description of the software design including flowcharts of the design at the functional level. The second purpose is to provide the user with a detailed description of the input parameters and formats necessary to execute the program and a description of the output produced when the program is executed.

Applying Standard Interfaces to a Process-Control Language

NASA Technical Reports Server (NTRS)

Berthold, Richard T.

2005-01-01

A method of applying open-operating-system standard interfaces to the NASA User Interface Language (UIL) has been devised. UIL is a computing language that can be used in monitoring and controlling automated processes: for example, the Timeliner computer program, written in UIL, is a general-purpose software system for monitoring and controlling sequences of automated tasks in a target system. In providing the major elements of connectivity between UIL and the target system, the present method offers advantages over the prior method. Most notably, unlike in the prior method, the software description of the target system can be made independent of the applicable compiler software and need not be linked to the applicable executable compiler image. Also unlike in the prior method, it is not necessary to recompile the source code and relink the source code to a new executable compiler image. Abstraction of the description of the target system to a data file can be defined easily, with intuitive syntax, and knowledge of the source-code language is not needed for the definition.

AOIPS 3 User's guide. Volume 1: Overview and software utilization

NASA Technical Reports Server (NTRS)

Schotz, S. S.; Negri, A. J.; Robinson, W.

1989-01-01

This is Volume I of the Atmospheric and Oceanographic Information Processing System (AOIPS) User's Guide. AOIPS 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. Volume 1 is intended to provide the user with an overall guide to the AOIPS system. It introduces the user to AOIPS system concepts, explains how programs are related and the necessary order of program execution, and provides brief descriptions derived from on-line help for every AOIPS program. It is intended to serve as a reference for information such as: program function, inmput/output variable descriptions, program limitations, etc. AOIPS is an interactive meteorological processing system with capabilities to ingest and analyze the many types of meteorological data. AOIPS includes several applications in areas of relevance to meteorological research. AOIPS is partitioned into four applications components: satellite data analysis, radar data analysis, aircraft data analysis, and utilities.

The Architecture Based Design Method

DTIC Science & Technology

2000-01-01

implementation of components of different types. The software templates include a description of how components interact with shared services and also include citizenship responsibilities for components.

Graphical Technique to Support the Teaching/Learning Process of Software Process Reference Models

NASA Astrophysics Data System (ADS)

Espinosa-Curiel, Ismael Edrein; Rodríguez-Jacobo, Josefina; Fernández-Zepeda, José Alberto

In this paper, we propose a set of diagrams to visualize software process reference models (PRM). The diagrams, called dimods, are the combination of some visual and process modeling techniques such as rich pictures, mind maps, IDEF and RAD diagrams. We show the use of this technique by designing a set of dimods for the Mexican Software Industry Process Model (MoProSoft). Additionally, we perform an evaluation of the usefulness of dimods. The result of the evaluation shows that dimods may be a support tool that facilitates the understanding, memorization, and learning of software PRMs in both, software development organizations and universities. The results also show that dimods may have advantages over the traditional description methods for these types of models.

Breakfast consumption determinants among female high school students of Yazd Province based on Pender's Health Promotion Model.

PubMed

Mehrabbeik, Akram; Mahmoodabad, Seyed Saeed Mazloomy; Khosravi, Hassan Mozaffari; Fallahzadeh, Hossein

2017-08-01

Despite the importance of breakfast, especially for students, unfortunately, this meal is usually ignored in daily routine. The aim of this study was to identify determinants among female high school students of Yazd province based on the Pender Health Promotion Model. This was a cross-sectional study conducted to examine 200 female high school students of Yazd, selected by cluster sampling method in 2016. A researcher-made questionnaire, based on Pender's Health Promotion Model, was used as a data collection tool. A panel of experts and Cronbach's alpha coefficient were used to confirm the questionnaire validity and reliability. In order to analyze descriptive data, SPSS version 22 was used. AMOS software (v.23) was employed for path analysis. Direct impact of activity -related affect (0.300), interpersonal influences (0.276), and perceived barriers to eating breakfast (-0.223) were approved at significance level p<0.000. By influencing perceived barriers, perceived self-efficacy and previous related behavior indirectly affected breakfast consumption. These components determined 33% of breakfast consumption. By planning to create a positive feeling in students to have breakfast, to involve family and friends to encourage students to eat breakfast, to reduce barriers to have breakfast by increasing students' self-efficacy, the behavior of having breakfast among students can be improved.

FFT transformed quantitative EEG analysis of short term memory load.

PubMed

Singh, Yogesh; Singh, Jayvardhan; Sharma, Ratna; Talwar, Anjana

2015-07-01

The EEG is considered as building block of functional signaling in the brain. The role of EEG oscillations in human information processing has been intensively investigated. To study the quantitative EEG correlates of short term memory load as assessed through Sternberg memory test. The study was conducted on 34 healthy male student volunteers. The intervention consisted of Sternberg memory test, which runs on a version of the Sternberg memory scanning paradigm software on a computer. Electroencephalography (EEG) was recorded from 19 scalp locations according to 10-20 international system of electrode placement. EEG signals were analyzed offline. To overcome the problems of fixed band system, individual alpha frequency (IAF) based frequency band selection method was adopted. The outcome measures were FFT transformed absolute powers in the six bands at 19 electrode positions. Sternberg memory test served as model of short term memory load. Correlation analysis of EEG during memory task was reflected as decreased absolute power in Upper alpha band in nearly all the electrode positions; increased power in Theta band at Fronto-Temporal region and Lower 1 alpha band at Fronto-Central region. Lower 2 alpha, Beta and Gamma band power remained unchanged. Short term memory load has distinct electroencephalographic correlates resembling the mentally stressed state. This is evident from decreased power in Upper alpha band (corresponding to Alpha band of traditional EEG system) which is representative band of relaxed mental state. Fronto-temporal Theta power changes may reflect the encoding and execution of memory task.

The new Langley Research Center advanced real-time simulation (ARTS) system

NASA Technical Reports Server (NTRS)

Crawford, D. J.; Cleveland, J. I., II

1986-01-01

Based on a survey of current local area network technology with special attention paid to high bandwidth and very low transport delay requirements, NASA's Langley Research Center designed a new simulation subsystem using the computer automated measurement and control (CAMAC) network. This required significant modifications to the standard CAMAC system and development of a network switch, a clocking system, new conversion equipment, new consoles, supporting software, etc. This system is referred to as the advanced real-time simulation (ARTS) system. It is presently being built at LaRC. This paper provides a functional and physical description of the hardware and a functional description of the software. The requirements which drove the design are presented as well as present performance figures and status.

Detection of faults and software reliability analysis

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Multiversion or N-version programming was proposed as a method of providing fault tolerance in software. The approach requires the separate, independent preparation of multiple versions of a piece of software for some application. Specific topics addressed are: failure probabilities in N-version systems, consistent comparison in N-version systems, descriptions of the faults found in the Knight and Leveson experiment, analytic models of comparison testing, characteristics of the input regions that trigger faults, fault tolerance through data diversity, and the relationship between failures caused by automatically seeded faults.

Frequency Domain Identification Toolbox

NASA Technical Reports Server (NTRS)

Horta, Lucas G.; Juang, Jer-Nan; Chen, Chung-Wen

1996-01-01

This report documents software written in MATLAB programming language for performing identification of systems from frequency response functions. MATLAB is a commercial software environment which allows easy manipulation of data matrices and provides other intrinsic matrix functions capabilities. Algorithms programmed in this collection of subroutines have been documented elsewhere but all references are provided in this document. A main feature of this software is the use of matrix fraction descriptions and system realization theory to identify state space models directly from test data. All subroutines have templates for the user to use as guidelines.

Generalized clustering conditions of Jack polynomials at negative Jack parameter {alpha}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernevig, B. Andrei; Department of Physics, Princeton University, Princeton, New Jersey 08544; Haldane, F. D. M.

We present several conjectures on the behavior and clustering properties of Jack polynomials at a negative parameter {alpha}=-(k+1/r-1), with partitions that violate the (k,r,N)- admissibility rule of [Feigin et al. [Int. Math. Res. Notices 23, 1223 (2002)]. We find that the ''highest weight'' Jack polynomials of specific partitions represent the minimum degree polynomials in N variables that vanish when s distinct clusters of k+1 particles are formed, where s and k are positive integers. Explicit counting formulas are conjectured. The generalized clustering conditions are useful in a forthcoming description of fractional quantum Hall quasiparticles.

Some Minorants and Majorants of Random Walks and Levy Processes

NASA Astrophysics Data System (ADS)

Abramson, Joshua Simon

This thesis consists of four chapters, all relating to some sort of minorant or majorant of random walks or Levy processes. In Chapter 1 we provide an overview of recent work on descriptions and properties of the convex minorant of random walks and Levy processes as detailed in Chapter 2, [72] and [73]. This work rejuvenated the field of minorants, and led to the work in all the subsequent chapters. The results surveyed include point process descriptions of the convex minorant of random walks and Levy processes on a fixed finite interval, up to an independent exponential time, and in the infinite horizon case. These descriptions follow from the invariance of these processes under an adequate path transformation. In the case of Brownian motion, we note how further special properties of this process, including time-inversion, imply a sequential description for the convex minorant of the Brownian meander. This chapter is based on [3], which was co-written with Jim Pitman, Nathan Ross and Geronimo Uribe Bravo. Chapter 1 serves as a long introduction to Chapter 2, in which we offer a unified approach to the theory of concave majorants of random walks. The reasons for the switch from convex minorants to concave majorants are discussed in Section 1.1, but the results are all equivalent. This unified theory is arrived at by providing a path transformation for a walk of finite length that leaves the law of the walk unchanged whilst providing complete information about the concave majorant - the path transformation is different from the one discussed in Chapter 1, but this is necessary to deal with a more general case than the standard one as done in Section 2.6. The path transformation of Chapter 1, which is discussed in detail in Section 2.8, is more relevant to the limiting results for Levy processes that are of interest in Chapter 1. Our results lead to a description of a walk of random geometric length as a Poisson point process of excursions away from its concave majorant, which is then used to find a complete description of the concave majorant of a walk of infinite length. In the case where subsets of increments may have the same arithmetic mean (the more general case mentioned above), we investigate three nested compositions that naturally arise from our construction of the concave majorant. This chapter is based on [4], which was co-written with Jim Pitman. In Chapter 3, we study the Lipschitz minorant of a Levy process. For alpha > 0, the alpha-Lipschitz minorant of a function f : R→R is the greatest function m : R→R such that m ≤ f and | m(s) - m(t)| ≤ alpha |s - t| for all s, t ∈ R should such a function exist. If X = Xtt∈ R is a real-valued Levy process that is not pure linear drift with slope +/-alpha, then the sample paths of X have an alpha-Lipschitz minorant almost surely if and only if | E [X1]| < alpha. Denoting the minorant by M, we investigate properties of the random closed set Z := {t ∈ R : Mt = {Xt ∧ Xt-}, which, since it is regenerative and stationary, has the distribution of the closed range of some subordinator "made stationary" in a suitable sense. We give conditions for the contact set Z to be countable or to have zero Lebesgue measure, and we obtain formulas that characterize the Levy measure of the associated subordinator. We study the limit of Z as alpha → infinity and find for the so-called abrupt Levy processes introduced by Vigon that this limit is the set of local infima of X. When X is a Brownian motion with drift beta such that |beta| < alpha, we calculate explicitly the densities of various random variables related to the minorant. This chapter is based on [2], which was co-written with Steven N. Evans. Finally, in Chapter 4 we study the structure of the shocks for the inviscid Burgers equation in dimension 1 when the initial velocity is given by Levy noise, or equivalently when the initial potential is a two-sided Levy process This shock structure turns out to give rise to a parabolic minorant of the Levy process--see Section 4.2 for details. The main results are that when psi0 is abrupt in the sense of Vigon or has bounded variation with limsuph-2 h↓0y0 h=infinity , the set of points with zero velocity is regenerative, and that in the latter case this set is equal to the set of Lagrangian regular points, which is non-empty. When psi0 is abrupt the shock structure is discrete and when psi0 is eroded there are no rarefaction intervals. This chapter is based on [1].

Component Technology for High-Performance Scientific Simulation Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epperly, T; Kohn, S; Kumfert, G

2000-11-09

We are developing scientific software component technology to manage the complexity of modem, parallel simulation software and increase the interoperability and re-use of scientific software packages. In this paper, we describe a language interoperability tool named Babel that enables the creation and distribution of language-independent software libraries using interface definition language (IDL) techniques. We have created a scientific IDL that focuses on the unique interface description needs of scientific codes, such as complex numbers, dense multidimensional arrays, complicated data types, and parallelism. Preliminary results indicate that in addition to language interoperability, this approach provides useful tools for thinking about themore » design of modem object-oriented scientific software libraries. Finally, we also describe a web-based component repository called Alexandria that facilitates the distribution, documentation, and re-use of scientific components and libraries.« less

Temporal Progression of Visual Injury from Blast Exposure

DTIC Science & Technology

2017-09-01

seen throughout the duration of the study. To correlate experimental blast exposures in rodents to human blast exposures, a computational parametric...software (JMP 10.0, Cary,NC). Descriptive and univariate analyses will first be performed to identify the occurrence of delayed visual system...later). The biostatistician evaluating the retrospective data has completed the descriptive analysis and is working on the multiple regression. Table

Vids: Version 2.0 Alpha Visualization Engine

DTIC Science & Technology

2018-04-25

fidelity than existing efforts. Vids is a project aimed at producing more dynamic and interactive visualization tools using modern computer game ...move through and interact with the data to improve informational understanding. The Vids software leverages off-the-shelf modern game development...analysis and correlations. Recently, an ARL-pioneered project named Virtual Reality Data Analysis Environment (VRDAE) used VR and a modern game engine

Revisiting Mathematical Problem Solving and Posing in the Digital Era: Toward Pedagogically Sound Uses of Modern Technology

ERIC Educational Resources Information Center

Abramovich, S.

2014-01-01

The availability of sophisticated computer programs such as "Wolfram Alpha" has made many problems found in the secondary mathematics curriculum somewhat obsolete for they can be easily solved by the software. Against this background, an interplay between the power of a modern tool of technology and educational constraints it presents is…

Vacancy-ordering effects in AlB2-type ErGe2 - x(0.4 < x < or = 0.5).

PubMed

Christensen, Jeppe; Lidin, Sven; Malaman, Bernard; Venturini, Gerard

2008-06-01

In the Er-Ge system, the compostion range ErGe(2) to Er(2)Ge(3) has been investigated. Eight samples were produced by arc melting of the elements, and analyzed using X-ray powder diffraction. Nine crystal structures were found to be present in the samples. The structures are described as a homologous series and presented within the superspace formalism using the superspace group X2/m(alpha0gamma)0s, X representing the centring vector ((1/2), (1/2), 0, (1/2)). In this description the modulation vector q = (alphaa* + gammac*) is shown to be a direct measure of the Ge content as ErGe(2 - alpha) (alpha falls in the range 1\\over 3 to (1/2)). The large composition range is achieved by extended vacancy ordering in the planar 6(3) net of Ge with subsequent relaxation.

Doctor of pharmacy students' use of personal digital assistants.

PubMed

Siracuse, Mark V; Sowell, John G

2008-02-15

To describe the use of personal digital assistants (PDAs) by doctor of pharmacy (PharmD) students; determine the reliability of psychometric constructs that determine technology acceptance; and determine constructs that directly correlate with PDA use. A survey instrument was developed containing descriptive and psychometric items and administered to PharmD students at 2 universities. Over half of new users (58.1%) and experienced users (51.3%) reported using their PDA at least weekly. Eighty-four percent of experienced users used their PDA at least weekly to look up drug information. The most reliable scales were perceived usefulness (alpha = 0.92), perceived ease of use (alpha = 0.89), and attitude towards behavior (alpha = 0.84). Intention to use and self-reported use of PDAs were strongly correlated with perceived usefulness, attitude towards behavior, and compatibility. The majority of pharmacy students used their PDAs at least weekly and find them most useful for looking up drug information.

New approach to statistical description of fluctuating particle fluxes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saenko, V. V.

2009-01-15

The probability density functions (PDFs) of the increments of fluctuating particle fluxes are investigated. It is found that the PDFs have heavy power-law tails decreasing as x{sup -{alpha}-1} at x {yields} {infinity}. This makes it possible to describe these PDFs in terms of fractionally stable distributions (FSDs) q(x; {alpha}, {beta}, {theta}, {lambda}). The parameters {alpha}, {beta}, {gamma}, and {lambda} were estimated statistically using as an example the time samples of fluctuating particle fluxes measured in the edge plasma of the L-2M stellarator. Two series of fluctuating fluxes measured before and after boronization of the vacuum chamber were processed. It ismore » shown that the increments of fluctuating fluxes are well described by DSDs. The effect of boronization on the parameters of FSDs is analyzed. An algorithm for statistically estimating the FSD parameters and a procedure for processing experimental data are described.« less

HARV ANSER Flight Test Data Retrieval and Processing Procedures

NASA Technical Reports Server (NTRS)

Yeager, Jessie C.

1997-01-01

Under the NASA High-Alpha Technology Program the High Alpha Research Vehicle (HARV) was used to conduct flight tests of advanced control effectors, advanced control laws, and high-alpha design guidelines for future super-maneuverable fighters. The High-Alpha Research Vehicle is a pre-production F/A-18 airplane modified with a multi-axis thrust-vectoring system for augmented pitch and yaw control power and Actuated Nose Strakes for Enhanced Rolling (ANSER) to augment body-axis yaw control power. Flight testing at the Dryden Flight Research Center (DFRC) began in July 1995 and continued until May 1996. Flight data will be utilized to evaluate control law performance and aircraft dynamics, determine aircraft control and stability derivatives using parameter identification techniques, and validate design guidelines. To accomplish these purposes, essential flight data parameters were retrieved from the DFRC data system and stored on the Dynamics and Control Branch (DCB) computer complex at Langley. This report describes the multi-step task used to retrieve and process this data and documents the results of these tasks. Documentation includes software listings, flight information, maneuver information, time intervals for which data were retrieved, lists of data parameters and definitions, and example data plots.

Impact of the 3-D model strategy on science learning of the solar system

NASA Astrophysics Data System (ADS)

Alharbi, Mohammed

The purpose of this mixed method study, quantitative and descriptive, was to determine whether the first-middle grade (seventh grade) students at Saudi schools are able to learn and use the Autodesk Maya software to interact and create their own 3-D models and animations and whether their use of the software influences their study habits and their understanding of the school subject matter. The study revealed that there is value to the science students regarding the use of 3-D software to create 3-D models to complete science assignments. Also, this study aimed to address the middle-school students' ability to learn 3-D software in art class, and then ultimately use it in their science class. The success of this study may open the way to consider the impact of 3-D modeling on other school subjects, such as mathematics, art, and geography. When the students start using graphic design, including 3-D software, at a young age, they tend to develop personal creativity and skills. The success of this study, if applied in schools, will provide the community with skillful young designers and increase awareness of graphic design and the new 3-D technology. Experimental method was used to answer the quantitative research question, are there significant differences applying the learning method using 3-D models (no 3-D, premade 3-D, and create 3-D) in a science class being taught about the solar system and its impact on the students' science achievement scores? Descriptive method was used to answer the qualitative research questions that are about the difficulty of learning and using Autodesk Maya software, time that students take to use the basic levels of Polygon and Animation parts of the Autodesk Maya software, and level of students' work quality.

Perceived Effectiveness of Web Conferencing Software in the Digital Environment to Deliver a Graduate Course in Applied Behavior Analysis

ERIC Educational Resources Information Center

Hudson, Tina M.; Knight, Victoria; Collins, Belva C.

2012-01-01

This article provides an overview of the planning and instructional delivery of a course in Applied Behavior Analysis using Adobe Connect Pro™. A description of software features used by course instructors is provided along with how each feature compares to resources found to deliver instruction in a traditional classroom setting. In addition, the…

Design Recovery for Software Library Population

DTIC Science & Technology

1992-12-01

increase understandability, efficiency, and maintainability of the software and the design. A good representation choice will also aid in...required for a reengineering project. It details the analysis and planning phase and gives good criteria for determining the need for a reengineering...because it deals with all of these issues. With his complete description of the analysis and planning phase, Byrne has a good foundation for

Reconstruction of Internal Doses for the Alpha-Risk Case-Control Study of Lung Cancer and Leukaemia Among European Nuclear Workers.

PubMed

Bingham, Derek; Bérard, Philippe; Birchall, Alan; Bull, Richard; Cardis, Elisabeth; Challeton-de Vathaire, Cécile; Grellier, James; Hurtgen, Christian; Puncher, Matthew; Riddell, Anthony; Thierry-Chef, Isabelle

2017-05-01

The Alpha-Risk study required the reconstruction of doses to lung and red bone marrow for lung cancer and leukaemia cases and their matched controls from cohorts of nuclear workers in the UK, France and Belgium. The dosimetrists and epidemiologists agreed requirements regarding the bioassay data, biokinetic and dosimetric models and dose assessment software to be used and doses to be reported. The best values to use for uncertainties on the monitoring data, setting of exposure regimes and characteristics of the exposure material, including lung solubility, were the responsibility of the dosimetrist responsible for each cohort. Among 1721 subjects, the median absorbed dose to the lung from alpha radiations was 2.1 mGy, with a maximum dose of 316 mGy. The lung doses calculated reflect the higher levels of exposure seen among workers in the early years of the nuclear industry compared to today. © Crown copyright 2016.

A digital 3D atlas of the marmoset brain based on multi-modal MRI.

PubMed

Liu, Cirong; Ye, Frank Q; Yen, Cecil Chern-Chyi; Newman, John D; Glen, Daniel; Leopold, David A; Silva, Afonso C

2018-04-01

The common marmoset (Callithrix jacchus) is a New-World monkey of growing interest in neuroscience. Magnetic resonance imaging (MRI) is an essential tool to unveil the anatomical and functional organization of the marmoset brain. To facilitate identification of regions of interest, it is desirable to register MR images to an atlas of the brain. However, currently available atlases of the marmoset brain are mainly based on 2D histological data, which are difficult to apply to 3D imaging techniques. Here, we constructed a 3D digital atlas based on high-resolution ex-vivo MRI images, including magnetization transfer ratio (a T1-like contrast), T2w images, and multi-shell diffusion MRI. Based on the multi-modal MRI images, we manually delineated 54 cortical areas and 16 subcortical regions on one hemisphere of the brain (the core version). The 54 cortical areas were merged into 13 larger cortical regions according to their locations to yield a coarse version of the atlas, and also parcellated into 106 sub-regions using a connectivity-based parcellation method to produce a refined atlas. Finally, we compared the new atlas set with existing histology atlases and demonstrated its applications in connectome studies, and in resting state and stimulus-based fMRI. The atlas set has been integrated into the widely-distributed neuroimaging data analysis software AFNI and SUMA, providing a readily usable multi-modal template space with multi-level anatomical labels (including labels from the Paxinos atlas) that can facilitate various neuroimaging studies of marmosets. Published by Elsevier Inc.

Automated Software Development Workstation (ASDW)

NASA Technical Reports Server (NTRS)

Fridge, Ernie

1990-01-01

Software development is a serious bottleneck in the construction of complex automated systems. An increase of the reuse of software designs and components has been viewed as a way to relieve this bottleneck. One approach to achieving software reusability is through the development and use of software parts composition systems. A software parts composition system is a software development environment comprised of a parts description language for modeling parts and their interfaces, a catalog of existing parts, a composition editor that aids a user in the specification of a new application from existing parts, and a code generator that takes a specification and generates an implementation of a new application in a target language. The Automated Software Development Workstation (ASDW) is an expert system shell that provides the capabilities required to develop and manipulate these software parts composition systems. The ASDW is now in Beta testing at the Johnson Space Center. Future work centers on responding to user feedback for capability and usability enhancement, expanding the scope of the software lifecycle that is covered, and in providing solutions to handling very large libraries of reusable components.

Taking the Observatory to the Astronomer

NASA Astrophysics Data System (ADS)

Bisque, T. M.

1997-05-01

Since 1992, Software Bisque's Remote Astronomy Software has been used by the Mt. Wilson Institute to allow interactive control of a 24" telescope and digital camera via modem. Software Bisque now introduces a comparable, relatively low-cost observatory system that allows powerful, yet "user-friendly" telescope and CCD camera control via the Internet. Utilizing software developed for the Windows 95/NT operating systems, the system offers point-and-click access to comprehensive celestial databases, extremely accurate telescope pointing, rapid download of digital CCD images by one or many users and flexible image processing software for data reduction and analysis. Our presentation will describe how the power of the personal computer has been leveraged to provide professional-level tools to the amateur astronomer, and include a description of this system's software and hardware components. The system software includes TheSky Astronomy Software?, CCDSoft CCD Astronomy Software?, TPoint Telescope Pointing Analysis System? software, Orchestrate? and, optionally, the RealSky CDs. The system hardware includes the Paramount GT-1100? Robotic Telescope Mount, as well as third party CCD cameras, focusers and optical tube assemblies.

NASA Marshall Space Flight Center solar observatory report, January - June 1993

NASA Technical Reports Server (NTRS)

Smith, J. E.

1993-01-01

This report provides a description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and gives a summary of its observations and data reduction during January-June 1993. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer code.

NASA Marshall Space Flight Center Solar Observatory report, July - October 1993

NASA Technical Reports Server (NTRS)

Smith, J. E.

1994-01-01

This report provides a description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and gives a summary of its observations and data reduction during June-October 1993. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer code.

NASA Marshall Space Flight Center Solar Observatory report, March - May 1994

NASA Technical Reports Server (NTRS)

Smith, J. E.

1994-01-01

This report provides a description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and gives a summary of its observations and data reduction during March-May 1994. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer code.

A Simulation Study of Rater Agreement Measures with 2x2 Contingency Tables

ERIC Educational Resources Information Center

Ato, Manuel; Lopez, Juan Jose; Benavente, Ana

2011-01-01

A comparison between six rater agreement measures obtained using three different approaches was achieved by means of a simulation study. Rater coefficients suggested by Bennet's [sigma] (1954), Scott's [pi] (1955), Cohen's [kappa] (1960) and Gwet's [gamma] (2008) were selected to represent the classical, descriptive approach, [alpha] agreement…

75 FR 32184 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

... ELISA for Detection of Serum Levels of Soluble IL-15 Receptor Alpha Description of Invention: The invention is an ELISA based assay that can be used in the clinical setting to detect the presence of soluble...-15R expression. Advantages: The assay is in the industry accepted ELISA format. This non-radioactive...

Lower Merrimack Valley Workplace Education Project. Final Report.

ERIC Educational Resources Information Center

Norris, Cynthia Zylkuski; Breen, Patricia K.

A description is provided of the Lower Merrimack Valley Workplace Education Project (WEP), an educational project that offers English-as-a-Second-Language (ESL) and job-specific education classes to hourly employees in the Semiconductor Division of Alpha Industries. The challenge of the project was to create a WEP that could accommodate the…

Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays.

PubMed

Murr, L E; Gaytan, S M; Medina, F; Lopez, H; Martinez, E; Machado, B I; Hernandez, D H; Martinez, L; Lopez, M I; Wicker, R B; Bracke, J

2010-04-28

In this paper, we examine prospects for the manufacture of patient-specific biomedical implants replacing hard tissues (bone), particularly knee and hip stems and large bone (femoral) intramedullary rods, using additive manufacturing (AM) by electron beam melting (EBM). Of particular interest is the fabrication of complex functional (biocompatible) mesh arrays. Mesh elements or unit cells can be divided into different regions in order to use different cell designs in different areas of the component to produce various or continually varying (functionally graded) mesh densities. Numerous design elements have been used to fabricate prototypes by AM using EBM of Ti-6Al-4V powders, where the densities have been compared with the elastic (Young) moduli determined by resonant frequency and damping analysis. Density optimization at the bone-implant interface can allow for bone ingrowth and cementless implant components. Computerized tomography (CT) scans of metal (aluminium alloy) foam have also allowed for the building of Ti-6Al-4V foams by embedding the digital-layered scans in computer-aided design or software models for EBM. Variations in mesh complexity and especially strut (or truss) dimensions alter the cooling and solidification rate, which alters the alpha-phase (hexagonal close-packed) microstructure by creating mixtures of alpha/alpha' (martensite) observed by optical and electron metallography. Microindentation hardness measurements are characteristic of these microstructures and microstructure mixtures (alpha/alpha') and sizes.

NLM microcomputer-based tutorials (for microcomputers). Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkins, M.

1990-04-01

The package consists of TOXLEARN--a microcomputer-based training package for TOXLINE (Toxicology Information Online), CHEMLEARN-a microcomputer-based training package for CHEMLINE (Chemical Information Online), MEDTUTOR--a microcomputer-based training package for MEDLINE (Medical Information Online), and ELHILL LEARN--a microcomputer-based training package for the ELHILL search and retrieval software that supports the above-mentioned databases...Software Description: The programs were developed under PILOTplus using the NLM LEARN Programmer. They run on IBM-PC, XT, AT, PS/2, and fully compatible computers. The programs require 512K RAM memory, one disk drive, and DOS 2.0 or higher. The software supports most monochrome, color graphics, enhanced color graphics, or visual graphics displays.

Design Specification for a Thrust-Vectoring, Actuated-Nose-Strake Flight Control Law for the High-Alpha Research Vehicle

NASA Technical Reports Server (NTRS)

Bacon, Barton J.; Carzoo, Susan W.; Davidson, John B.; Hoffler, Keith D.; Lallman, Frederick J.; Messina, Michael D.; Murphy, Patrick C.; Ostroff, Aaron J.; Proffitt, Melissa S.; Yeager, Jessie C.;

Characterization of Morphology using MAMA Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gravelle, Julie

The MAMA (Morphological Analysis for Material Attribution) software was developed at the Los Alamos National Laboratory funded through the National Technical Nuclear Forensics Center in the Department of Homeland Security. The software allows images to be analysed and quantified. The largest project I worked on was to quantify images of plutonium oxides and ammonium diuranates prepared by the group with the software and provide analyses on the particles of each sample. Images were quantified through MAMA, with a color analysis, a lexicon description and powder x-ray diffraction. Through this we were able to visually see a difference between some ofmore » the syntheses. An additional project was to revise the manual for MAMA to help streamline training and provide useful tips to users to more quickly become acclimated to using the software. The third project investigated expanding the scope of MAMA and finding a statistically relevant baseline for the particulates through the analysis of maps in the software and using known measurements to compare the error associated with the software. During this internship, I worked on several different projects dealing with the MAMA software. The revision of the usermanual for the MAMA software was the first project I was able to work and collaborate on. I first learned how to use the software by getting instruction from a skilled user at the laboratory, Dan Schwartz, and by using the existing user manual and examples. After becoming accustomed to the program, I started to go over the manual to correct and change items that were not as useful or descriptive as they could have been. I also added in tips that I learned as I explored the software. The updated manual was also worked on by several others who have been developing the program. The goal of these revisions was to ensure the most concise and simple directions to the software were available to future users. By incorporating tricks and shortcuts that I discovered and picked up from watching other users into the user guide, I believe that anyone who utilizes the software will be able to quickly understand the best way to analyze their image and use the tools the program offers to achieve useful results.« less

Using XML and Java for Astronomical Instrument Control

NASA Astrophysics Data System (ADS)

Koons, L.; Ames, T.; Evans, R.; Warsaw, C.; Sall, K.

1999-12-01

Traditionally, instrument command and control systems have been highly specialized, consisting mostly of custom code that is difficult to develop, maintain, and extend. Such solutions are initially very costly and are inflexible to subsequent engineering change requests. Instrument description is too tightly coupled with details of implementation. NASA/Goddard Space Flight Center and AppNet, Inc. are developing a very general and highly extensible framework that applies to virtually any kind of instrument that can be controlled by a computer (e.g., telescopes, microscopes and printers). A key aspect of the object-oriented architecture, implemented in Java, involves software that is driven by an instrument description. The Astronomical Instrument Markup Language (AIML) is a domain-specific implementation of the more generalized Instrument Markup Language (IML). The software architecture combines the platform-independent processing capabilities of Java with the vendor-independent data description syntax of Extensible Markup Language (XML), a human-readable and machine-understandable way to describe structured data. IML is used to describe command sets (including parameters, datatypes, and constraints) and their associated formats, telemetry, and communication mechanisms. The software uses this description to present graphical user interfaces to control and monitor the instrument. Recent efforts have extended to command procedures (scripting) and representation of data pipeline inputs, outputs, and connections. Near future efforts are likely to include an XML description of data visualizations, as well as the potential use of XSL (Extensible Stylesheet Language) to permit astronomers to customize the user interface on several levels: per user, instrument, subsystem, or observatory-wide. Our initial prototyping effort was targeted for HAWC (High-resolution Airborne Wideband Camera), a first-light instrument of SOFIA (the Stratospheric Observatory for Infrared Astronomy). A production-level application of this technology is for one of the three candidate detectors of SPIRE (Spectral and Photometric Imaging REceiver), a focal plane instrument proposed for the European Space Agency's Far Infrared Space Telescope. The detectors are being developed by the Infrared Astrophysics Branch of NASA/GSFC.

Versatile Software Package For Near Real-Time Analysis of Experimental Data

NASA Technical Reports Server (NTRS)

Wieseman, Carol D.; Hoadley, Sherwood T.

1998-01-01

This paper provides an overview of a versatile software package developed for time- and frequency-domain analyses of experimental wind-tunnel data. This package, originally developed for analyzing data in the NASA Langley Transonic Dynamics Tunnel (TDT), is applicable for analyzing any time-domain data. A Matlab-based software package, TDT-analyzer, provides a compendium of commonly-required dynamic analysis functions in a user-friendly interactive and batch processing environment. TDT-analyzer has been used extensively to provide on-line near real-time and post-test examination and reduction of measured data acquired during wind tunnel tests of aeroelastically-scaled models of aircraft and rotorcraft as well as a flight test of the NASA High Alpha Research Vehicle (HARV) F-18. The package provides near real-time results in an informative and timely manner far exceeding prior methods of data reduction at the TDT.

On the symmetries of the 12C nucleus

NASA Astrophysics Data System (ADS)

Cseh, J.; Trencsényi, R.

The consequences of some symmetries of the three-alpha system are discussed. In particular, the recent description of the low-energy spectrum of the 12C nucleus in terms of the algebraic cluster model (ACM) is compared to that of the multichannel dynamical symmetry (MUSY), which is the intersection of the shell and cluster models. The previous one applies interactions of a D3h geometric symmetry [D. J. Marin-Lambarri et al., Phys. Rev. Lett. 113 (2014) 012502], while the latter one has a U(3) dynamical symmetry. The available data is in line with both descriptions.

Automatic control system generation for robot design validation

NASA Technical Reports Server (NTRS)

Bacon, James A. (Inventor); English, James D. (Inventor)

2012-01-01

The specification and drawings present a new method, system and software product for and apparatus for generating a robotic validation system for a robot design. The robotic validation system for the robot design of a robotic system is automatically generated by converting a robot design into a generic robotic description using a predetermined format, then generating a control system from the generic robotic description and finally updating robot design parameters of the robotic system with an analysis tool using both the generic robot description and the control system.

Validation of reference genes for gene expression analysis in olive (Olea europaea) mesocarp tissue by quantitative real-time RT-PCR

PubMed Central

2014-01-01

Background Gene expression analysis using quantitative reverse transcription PCR (qRT-PCR) is a robust method wherein the expression levels of target genes are normalised using internal control genes, known as reference genes, to derive changes in gene expression levels. Although reference genes have recently been suggested for olive tissues, combined/independent analysis on different cultivars has not yet been tested. Therefore, an assessment of reference genes was required to validate the recent findings and select stably expressed genes across different olive cultivars. Results A total of eight candidate reference genes [glyceraldehyde 3-phosphate dehydrogenase (GAPDH), serine/threonine-protein phosphatase catalytic subunit (PP2A), elongation factor 1 alpha (EF1-alpha), polyubiquitin (OUB2), aquaporin tonoplast intrinsic protein (TIP2), tubulin alpha (TUBA), 60S ribosomal protein L18-3 (60S RBP L18-3) and polypyrimidine tract-binding protein homolog 3 (PTB)] were chosen based on their stability in olive tissues as well as in other plants. Expression stability was examined by qRT-PCR across 12 biological samples, representing mesocarp tissues at various developmental stages in three different olive cultivars, Barnea, Frantoio and Picual, independently and together during the 2009 season with two software programs, GeNorm and BestKeeper. Both software packages identified GAPDH, EF1-alpha and PP2A as the three most stable reference genes across the three cultivars and in the cultivar, Barnea. GAPDH, EF1-alpha and 60S RBP L18-3 were found to be most stable reference genes in the cultivar Frantoio while 60S RBP L18-3, OUB2 and PP2A were found to be most stable reference genes in the cultivar Picual. Conclusions The analyses of expression stability of reference genes using qRT-PCR revealed that GAPDH, EF1-alpha, PP2A, 60S RBP L18-3 and OUB2 are suitable reference genes for expression analysis in developing Olea europaea mesocarp tissues, displaying the highest level of expression stability across three different olive cultivars, Barnea, Frantoio and Picual, however the combination of the three most stable reference genes do vary amongst individual cultivars. This study will provide guidance to other researchers to select reference genes for normalization against target genes by qPCR across tissues obtained from the mesocarp region of the olive fruit in the cultivars, Barnea, Frantoio and Picual. PMID:24884716

Space Communication and Navigation Testbed Communications Technology for Exploration

NASA Technical Reports Server (NTRS)

Reinhart, Richard

2013-01-01

NASA developed and launched an experimental flight payload (referred to as the Space Communication and Navigation Test Bed) to investigate software defined radio, networking, and navigation technologies, operationally in the space environment. The payload consists of three software defined radios each compliant to NASAs Space Telecommunications Radio System Architecture, a common software interface description standard for software defined radios. The software defined radios are new technology developed by NASA and industry partners. The payload is externally mounted to the International Space Station truss and available to NASA, industry, and university partners to conduct experiments representative of future mission capability. Experiment operations include in-flight reconfiguration of the SDR waveform functions and payload networking software. The flight system communicates with NASAs orbiting satellite relay network, the Tracking, Data Relay Satellite System at both S-band and Ka-band and to any Earth-based compatible S-band ground station.

Femoral head-neck junction deformity is related to osteoarthritis of the hip.

PubMed

Barros, Hilton José Melo; Camanho, Gilberto Luis; Bernabé, Antônio Carlos; Rodrigues, Marcelo Bordalo; Leme, Luiz Eugênio Garcez

2010-07-01

Primary or idiopathic osteoarthritis (OA) of the hip has increasingly been attributed to the presence of presumably minor femoral or acetabular deformities that are not routinely identified. The alpha angle reflects one such deformity of the femoral neck and reflects a risk for femoroacetabular impingement, which in turn reportedly is associated with OA. If impingement is in fact associated with OA, then one might expect the mean alpha angle to be greater in patients with presumed idiopathic hip OA. We therefore compared the alpha angle among a group of elderly patients with idiopathic OA with that in a control group of elderly individuals without OA. We measured the alpha angles in 50 individuals (72 hips) with a mean age of 70 years (range, 60-84 years) with apparently idiopathic OA and compared their angles with those from a control group of 56 individuals without OA. The alpha angle was measured by means of radiographs of their hips using the Dunn view at 45 degrees flexion. The patients with OA had a greater percentage with abnormal alpha angles than did the normal subjects: 82% versus 30%, respectively. The mean alpha angle in the group with OA was larger than in the control subjects: 66.4 masculine (range, 28 degrees -108 degrees ) versus 48.1 masculine (range, 34 degrees -68 degrees ). Hips with presumably idiopathic OA had more abnormalities at the femoral head-neck junction than did the control hips without OA and may relate to the risk of OA developing. Level II, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

ThermalTracker Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

The software processes recorded thermal video and detects the flight tracks of birds and bats that passed through the camera's field of view. The output is a set of images that show complete flight tracks for any detections, with the direction of travel indicated and the thermal image of the animal delineated. A report of the descriptive features of each detected track is also output in the form of a comma-separated value text file.

Simulation of a Canard in Fluid Flow Driven by a Piezoelectric Beam with a Software Control Loop

DTIC Science & Technology

2014-04-01

The canard is actuated by a piezoelectric beam that bends as voltage is applied. The voltage is controlled by a software subroutine that measures...Dynamic system Modeling Co-simulation Simulation Abaqus Finite element analysis (FEA) Finite element method (FEM) Computational...is unlimited. i CONTENTS Page Introduction 1 Model Description 1 Fluid Model 2 Structural Model 3 Control Subroutine 4 Results 4

EHR Improvement Using Incident Reports.

PubMed

Teame, Tesfay; Stålhane, Tor; Nytrø, Øystein

2017-01-01

This paper discusses reactive improvement of clinical software using methods for incident analysis. We used the "Five Whys" method because we had only descriptive data and depended on a domain expert for the analysis. The analysis showed that there are two major root causes for EHR software failure, and that they are related to human and organizational errors. A main identified improvement is allocating more resources to system maintenance and user training.

Advanced Extravehicular Mobility Unit Informatics Software Design

NASA Technical Reports Server (NTRS)

Wright, Theodore

2014-01-01

This is a description of the software design for the 2013 edition of the Advanced Extravehicular Mobility Unit (AEMU) Informatics computer assembly. The Informatics system is an optional part of the space suit assembly. It adds a graphical interface for displaying suit status, timelines, procedures, and caution and warning information. In the future it will display maps with GPS position data, and video and still images captured by the astronaut.

Content analysis of cancer blog posts.

PubMed

Kim, Sujin

2009-10-01

The efficacy of user-defined subject tagging and software-generated subject tagging for describing and organizing cancer blog contents was explored. The Technorati search engine was used to search the blogosphere for cancer blog postings generated during a two-month period. Postings were mined for relevant subject concepts, and blogger-defined tags and Text Analysis Portal for Research (TAPoR) software-defined tags were generated for each message. Descriptive data were collected, and the blogger-defined tags were compared with software-generated tags. Three standard vocabularies (Opinion Templates, Basic Resource, and Medical Subject Headings [MeSH] Resource) were used to assign subject terms to the blogs, with results compared for efficacy in information retrieval. Descriptive data showed that most of the studied cancer blogs (80%) contained fewer than 500 words each. The numbers of blogger-defined tags per posting (M = 4.49 per posting) were significantly smaller than the TAPoR keywords (M = 23.55 per posting). Both blogger-defined subject tags and software-generated subject tags were often overly broad or overly narrow in focus, producing less than effective search results for those seeking to extract information from cancer blogs. Additional exploration into methods for systematically organizing cancer blog postings is necessary if blogs are to become stable and efficacious information resources for cancer patients, friends, families, or providers.

Rotational Analysis of Phase Plane Curves: Complex and Pure Imaginary Eigenvalues

ERIC Educational Resources Information Center

Murray, Russell H.

2005-01-01

Although the phase plane can be plotted and analyzed using an appropriate software package, the author found it worthwhile to engage the students with the theorem and the two proofs. The theorem is a powerful tool that provides insight into the rotational behavior of the phase plane diagram in a simple way: just check the signs of c and [alpha].…

Quantitative electroencephalogram (QEEG) Spectrum Analysis of Patients with Schizoaffective Disorder Compared to Normal Subjects.

PubMed

Moeini, Mahdi; Khaleghi, Ali; Amiri, Nasrin; Niknam, Zahra

2014-10-01

The aim of this study was to achieve a better understanding of schizoaffective disorder. Therefore, we obtained electroencephalogram (EEG) signals from patients with schizoaffective disorder and analyzed them in comparison to normal subjects. Forty patients with schizoaffective disorder and 40 normal subjects were selected randomly and their electroencephalogram signals were recorded based on 10-20 international system by 23 electrodes in open- and closed-eyes while they were sitting on a chair comfortably. After preprocessing for noise removal and artifact reduction, we took 60- second segments from each recorded signals. Then, the absolute and relative powers of these segments were evaluated in all channels and in 4 frequency bands (i.e., delta, theta, alpha and beta waves). Finally, Data were analyzed by independent t-test using SPSS software. A significant decrease in relative power in the alpha band, a significant decrease in power spectra in the alpha band and a significant increase in power spectra in the beta band were found in patients compared to normal subjects (P < 0.05). The predominant wave in the centro-parietal region was the beta wave in patients, but it was the alpha band in normal subjects (P = 0.048). Also, the predominant wave of the occipital region in patients was the delta wave, while it was the alpha wave in normal subjects (P = 0.038). Considering the findings, particularly based on the significant decrease of the alpha waves in schizoaffective patients, it can be concluded that schizoaffective disorder can be seen in schizophrenia spectrum.

A 45-ns molecular dynamics simulation of hemoglobin in water by vectorizing and parallelizing COSMOS90 on the earth simulator: dynamics of tertiary and quaternary structures.

PubMed

Saito, Minoru; Okazaki, Isao

2007-04-30

Molecular dynamics (MD) simulations of human adult hemoglobin (HbA) were carried out for 45 ns in water with all degrees of freedom including bond stretching and without any artificial constraints. To perform such large-scale simulations, one of the authors (M.S.) accelerated his own software COSMOS90 on the Earth Simulator by vectorization and parallelization. The dynamical features of HbA were investigated by evaluating root-mean-square deviations from the initial X-ray structure (an oxy T-state hemoglobin with PDB code: 1GZX) and root-mean-square fluctuations around the average structure from the simulation trajectories. The four subunits (alpha(1), alpha(2), beta(1), and beta(2)) of HbA maintained structures close to their respective X-ray structures during the simulations even though no constraints were applied to HbA in the simulations. Dimers alpha(1)beta(1) and alpha(2)beta(2) also maintained structures close to their respective X-ray structures while they moved relative to each other like two stacks of dumbbells. The distance between the two dimers (alpha(1)beta(1) and alpha(2)beta(2)) increased by 2 A (7.4%) in the initial 15 ns and stably fluctuated at the distance with the standard deviation 0.2 A. The relative orientation of the two dimers fluctuated between the initial X-ray angle -100 degrees and about -105 degrees with intervals of a few tens of nanoseconds.

Collaboration in Global Software Engineering Based on Process Description Integration

NASA Astrophysics Data System (ADS)

Klein, Harald; Rausch, Andreas; Fischer, Edward

Globalization is one of the big trends in software development. Development projects need a variety of different resources with appropriate expert knowledge to be successful. More and more of these resources are nowadays obtained from specialized organizations and countries all over the world, varying in development approaches, processes, and culture. As seen with early outsourcing attempts, collaboration may fail due to these differences. Hence, the major challenge in global software engineering is to streamline collaborating organizations towards a successful conjoint development. Based on typical collaboration scenarios, this paper presents a structured approach to integrate processes in a comprehensible way.

Air Force Geophysics Laboratory portable PCM ground station

NASA Astrophysics Data System (ADS)

Shaw, H.; Lawrence, F. A.

The present paper is concerned with the development of a portable Pulse-Code Modulation (PCM) telemetry station for the Air Force Geophysics Laboratory (AFGL). A system description is provided, taking into account the system equipment, the interface, the decommutator (DECOM) section of the interface, the direct memory access (DMA) section, and system specifications and capabilities. In the context of selecting between two conflicting philosophies regarding software, it was decided to favor a small scale specialized approach. Attention is given to the operating system, aspects of setting up the software, the application software, and questions of portability.

Parameter Identification Flight Test Maneuvers for Closed Loop Modeling of the F-18 High Alpha Research Vehicle (HARV)

NASA Technical Reports Server (NTRS)

Batterson, James G. (Technical Monitor); Morelli, E. A.

1996-01-01

Flight test maneuvers are specified for the F-18 High Alpha Research Vehicle (HARV). The maneuvers were designed for closed loop parameter identification purposes, specifically for longitudinal and lateral linear model parameter estimation at 5,20,30,45, and 60 degrees angle of attack, using the Actuated Nose Strakes for Enhanced Rolling (ANSER) control law in Thrust Vectoring (TV) mode. Each maneuver is to be realized by applying square wave inputs to specific pilot station controls using the On-Board Excitation System (OBES). Maneuver descriptions and complete specifications of the time / amplitude points defining each input are included, along with plots of the input time histories.

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 2: Technical analysis

NASA Technical Reports Server (NTRS)

1978-01-01

A technical analysis on the feasibility of commercial manufacturing of pharmaceuticals in space is presented. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is described. The candidate products are antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon. Production mass balances for antihemophelic factor, beta cells, and erythropoietin were compared for space versus ground operation. A conceptual description of a multiproduct processing system for space operation is discussed. Production requirements for epidermal growth factor of alpha-1-antitrypsin and interferon are presented.

Overexpression of Lactobacillus casei D-hydroxyisocaproic acid dehydrogenase in cheddar cheese.

PubMed

Broadbent, Jeffery R; Gummalla, Sanjay; Hughes, Joanne E; Johnson, Mark E; Rankin, Scott A; Drake, Mary Anne

2004-08-01

Metabolism of aromatic amino acids by lactic acid bacteria is an important source of off-flavor compounds in Cheddar cheese. Previous work has shown that alpha-keto acids produced from Trp, Tyr, and Phe by aminotransferase enzymes are chemically labile and may degrade spontaneously into a variety of off-flavor compounds. However, dairy lactobacilli can convert unstable alpha-keto acids to more-stable alpha-hydroxy acids via the action of alpha-keto acid dehydrogenases such as d-hydroxyisocaproic acid dehydrogenase. To further characterize the role of this enzyme in cheese flavor, the Lactobacillus casei d-hydroxyisocaproic acid dehydrogenase gene was cloned into the high-copy-number vector pTRKH2 and transformed into L. casei ATCC 334. Enzyme assays confirmed that alpha-keto acid dehydrogenase activity was significantly higher in pTRKH2:dhic transformants than in wild-type cells. Reduced-fat Cheddar cheeses were made with Lactococcus lactis starter only, starter plus L. casei ATCC 334, and starter plus L. casei ATCC 334 transformed with pTRKH2:dhic. After 3 months of aging, the cheese chemistry and flavor attributes were evaluated instrumentally by gas chromatography-mass spectrometry and by descriptive sensory analysis. The culture system used significantly affected the concentrations of various ketones, aldehydes, alcohols, and esters and one sulfur compound in cheese. Results further indicated that enhanced expression of d-hydroxyisocaproic acid dehydrogenase suppressed spontaneous degradation of alpha-keto acids, but sensory work indicated that this effect retarded cheese flavor development.

WEST-3 wind turbine simulator development

NASA Technical Reports Server (NTRS)

Hoffman, J. A.; Sridhar, S.

1985-01-01

The software developed for WEST-3, a new, all digital, and fully programmable wind turbine simulator is given. The process of wind turbine simulation on WEST-3 is described in detail. The major steps are, the processing of the mathematical models, the preparation of the constant data, and the use of system software generated executable code for running on WEST-3. The mechanics of reformulation, normalization, and scaling of the mathematical models is discussed in detail, in particulr, the significance of reformulation which leads to accurate simulations. Descriptions for the preprocessor computer programs which are used to prepare the constant data needed in the simulation are given. These programs, in addition to scaling and normalizing all the constants, relieve the user from having to generate a large number of constants used in the simulation. Also given are brief descriptions of the components of the WEST-3 system software: Translator, Assembler, Linker, and Loader. Also included are: details of the aeroelastic rotor analysis, which is the center of a wind turbine simulation model, analysis of the gimbal subsystem; and listings of the variables, constants, and equations used in the simulation.

NASA Marshall Space Flight Center Solar Observatory Report, July to December 1992

NASA Technical Reports Server (NTRS)

Smith, J. E.

1993-01-01

This report provides a description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and gives a summary of its observations and data reduction during July-December 1992. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer code.

NASA Marshall Space Flight Center Solar Observatory report, January - June 1992

NASA Technical Reports Server (NTRS)

Smith, James E.

1992-01-01

This report provides a description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and gives a summary of its observations and data reduction during Jan. to Jun. 1992. The systems that make up the facility are a magnetograph telescope, and H-alpha telescope, a Questar telescope, and a computer code.

Capi text V.1--data analysis software for nailfold skin capillaroscopy.

PubMed

Dobrev, Hristo P

2007-01-01

Nailfold skin capillaroscopy is a simple non-invasive method used to assess conditions of disturbed microcirculation such as Raynaud's phenomenon, acrocyanosis, perniones, connective tissue diseases, psoriasis, diabetes mellitus, neuropathy and vibration disease. To develop data analysis software aimed at assisting the documentation and analysis of a capillaroscopic investigation. SOFTWARE DESCRIPTION: The programme is based on a modular principle. The module "Nomenclatures" includes menus for the patients' data. The module "Examinations" includes menus for all general and specific aspects of the medical examination and capillaroscopic investigations. The modules "Settings" and "Information" include customization menus for the programme. The results of nailfold capillaroscopy can be printed in a short or expanded form. This software allows physicians to perform quick search by using various specified criteria and prepare analyses and reports. This software programme will facilitate any practitioner who performs nailfold skin capillaroscopy.

The Molybdenum titanium Phase Diagram Evaluated from Ab initio Calculations

DTIC Science & Technology

2016-10-07

thermodynamic properties of this binary system are not well known and two conflicting descriptions of the β-phase stability have been presented in the...computational thermodynamics CALPHAD approach [13] and the Thermo-Calc software [14]. These studies led to two conflicting descriptions of the stability of...energy calculations, with an energy cutoff separating core and valence states of -6 Ry. 2.2. Thermodynamic modeling The formation enthalpy of a

Automatic Digital Hardware Synthesis

DTIC Science & Technology

1990-09-01

VHDL to PALASM, a hardware synthesis language. The PALASM description is then directly implemented into a field programmable gate array (FPGAI using...process of translating VHDL to PALASM, a hardware synthesis language. The PALASM description is then directly implemented into a field programmable gate...allows the engineer to use VHDL to create and validate a design, and then to implement it in a gate array. The development of software o translate VHDL

The computational structural mechanics testbed procedures manual

NASA Technical Reports Server (NTRS)

Stewart, Caroline B. (Compiler)

1991-01-01

The purpose of this manual is to document the standard high level command language procedures of the Computational Structural Mechanics (CSM) Testbed software system. A description of each procedure including its function, commands, data interface, and use is presented. This manual is designed to assist users in defining and using command procedures to perform structural analysis in the CSM Testbed User's Manual and the CSM Testbed Data Library Description.

HSCT4.0 Application: Software Requirements Specification

NASA Technical Reports Server (NTRS)

Salas, A. O.; Walsh, J. L.; Mason, B. H.; Weston, R. P.; Townsend, J. C.; Samareh, J. A.; Green, L. L.

2001-01-01

The software requirements for the High Performance Computing and Communication Program High Speed Civil Transport application project, referred to as HSCT4.0, are described. The objective of the HSCT4.0 application project is to demonstrate the application of high-performance computing techniques to the problem of multidisciplinary design optimization of a supersonic transport configuration, using high-fidelity analysis simulations. Descriptions of the various functions (and the relationships among them) that make up the multidisciplinary application as well as the constraints on the software design arc provided. This document serves to establish an agreement between the suppliers and the customer as to what the HSCT4.0 application should do and provides to the software developers the information necessary to design and implement the system.

Wall adjustment strategy software for use with the NASA Langley 0.3-meter transonic cryogenic tunnel adaptive wall test section

NASA Technical Reports Server (NTRS)

Wolf, Stephen W. D.

1988-01-01

The Wall Adjustment Strategy (WAS) software provides successful on-line control of the 2-D flexible walled test section of the Langley 0.3-m Transonic Cryogenic Tunnel. This software package allows the level of operator intervention to be regulated as necessary for research and production type 2-D testing using and Adaptive Wall Test Section (AWTS). The software is designed to accept modification for future requirements, such as 3-D testing, with a minimum of complexity. The WAS software described is an attempt to provide a user friendly package which could be used to control any flexible walled AWTS. Control system constraints influence the details of data transfer, not the data type. Then this entire software package could be used in different control systems, if suitable interface software is available. A complete overview of the software highlights the data flow paths, the modular architecture of the software and the various operating and analysis modes available. A detailed description of the software modules includes listings of the code. A user's manual is provided to explain task generation, operating environment, user options and what to expect at execution.

Software Technology for Adaptable, Reliable Systems (STARS). Repository Integration AdaKNET Software User’s Manual

DTIC Science & Technology

1990-10-03

9 4.1. Mapping the Conceptual Model to the Implementation ................................................ 9 4.2. Overview of...browser-editor application. Finally, appendix A provides a detailed description of the AdaKNET conceptual model; users of AdaKNET should fami...provide a brief summary of the semantics of the underlying conceptual model implemented by AdaKNET, use of the AdaKNET ADT will require a more thorough

Simulation verification techniques study. Task report 4: Simulation module performance parameters and performance standards

NASA Technical Reports Server (NTRS)

1974-01-01

Shuttle simulation software modules in the environment, crew station, vehicle configuration and vehicle dynamics categories are discussed. For each software module covered, a description of the module functions and operational modes, its interfaces with other modules, its stored data, inputs, performance parameters and critical performance parameters is given. Reference data sources which provide standards of performance are identified for each module. Performance verification methods are also discussed briefly.

Environmental statistics with S-Plus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Millard, S.P.; Neerchal, N.K.

1999-12-01

The combination of easy-to-use software with easy access to a description of the statistical methods (definitions, concepts, etc.) makes this book an excellent resource. One of the major features of this book is the inclusion of general information on environmental statistical methods and examples of how to implement these methods using the statistical software package S-Plus and the add-in modules Environmental-Stats for S-Plus, S+SpatialStats, and S-Plus for ArcView.

Ada(R) Test and Verification System (ATVS)

NASA Technical Reports Server (NTRS)

Strelich, Tom

1986-01-01

The Ada Test and Verification System (ATVS) functional description and high level design are completed and summarized. The ATVS will provide a comprehensive set of test and verification capabilities specifically addressing the features of the Ada language, support for embedded system development, distributed environments, and advanced user interface capabilities. Its design emphasis was on effective software development environment integration and flexibility to ensure its long-term use in the Ada software development community.

State transition storyboards: A tool for designing the Goldstone solar system radar data acquisition system user interface software

NASA Technical Reports Server (NTRS)

Howard, S. D.

1987-01-01

Effective user interface design in software systems is a complex task that takes place without adequate modeling tools. By combining state transition diagrams and the storyboard technique of filmmakers, State Transition Storyboards were developed to provide a detailed modeling technique for the Goldstone Solar System Radar Data Acquisition System human-machine interface. Illustrations are included with a description of the modeling technique.

Software Engineering Laboratory (SEL) database organization and user's guide, revision 2

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Bristow, John

1992-01-01

The organization of the Software Engineering Laboratory (SEL) database is presented. Included are definitions and detailed descriptions of the database tables and views, the SEL data, and system support data. The mapping from the SEL and system support data to the base table is described. In addition, techniques for accessing the database through the Database Access Manager for the SEL (DAMSEL) system and via the ORACLE structured query language (SQL) are discussed.

Software Engineering Laboratory (SEL) database organization and user's guide

NASA Technical Reports Server (NTRS)

So, Maria; Heller, Gerard; Steinberg, Sandra; Spiegel, Douglas

1989-01-01

The organization of the Software Engineering Laboratory (SEL) database is presented. Included are definitions and detailed descriptions of the database tables and views, the SEL data, and system support data. The mapping from the SEL and system support data to the base tables is described. In addition, techniques for accessing the database, through the Database Access Manager for the SEL (DAMSEL) system and via the ORACLE structured query language (SQL), are discussed.

Guidelines for Applying Video Simulation Technology to Training Land Design

DTIC Science & Technology

1993-02-01

Training Land Design for Realism." The technical monitor was Dr. Victor Diersing, CEHSC-FN. This study was performed by the Environmental Resources...technology to their land management activities. 5 Objective The objective of this study was to provide a general overview of the use of video simulation...4). A market study of currently available hardware and software provided the basis for descriptions of hardware and software systems, and their

Libraries for Software Use on Peregrine | High-Performance Computing | NREL

Science.gov Websites

-specific libraries. Libraries List Name Description BLAS Basic Linear Algebra Subroutines, libraries only managing hierarchically structured data. LAPACK Standard Netlib offering for computational linear algebra

Advanced communications technology satellite high burst rate link evaluation terminal experiment control and monitor software user's guide, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document.

MySchoolDayOnline: Applying Universal Design Principles to the Development of a Fully Accessible Online Scheduling Tool for Students with Visual Impairments

ERIC Educational Resources Information Center

Sapp, Wendy

2007-01-01

This article presents the universal design features that were identified during the alpha development of a scheduler software program, known as MySchoolDayOnline, for use in schools, and provides preliminary research on the usability of these features. The study presented here investigated the accessibility and usability of MySchoolDayOnline for…

Computing maximum-likelihood estimates for parameters of the National Descriptive Model of Mercury in Fish

USGS Publications Warehouse

Donato, David I.

2012-01-01

This report presents the mathematical expressions and the computational techniques required to compute maximum-likelihood estimates for the parameters of the National Descriptive Model of Mercury in Fish (NDMMF), a statistical model used to predict the concentration of methylmercury in fish tissue. The expressions and techniques reported here were prepared to support the development of custom software capable of computing NDMMF parameter estimates more quickly and using less computer memory than is currently possible with available general-purpose statistical software. Computation of maximum-likelihood estimates for the NDMMF by numerical solution of a system of simultaneous equations through repeated Newton-Raphson iterations is described. This report explains the derivation of the mathematical expressions required for computational parameter estimation in sufficient detail to facilitate future derivations for any revised versions of the NDMMF that may be developed.

Do you also have problems with the file format syndrome?

PubMed

De Cuyper, B; Nyssen, E; Christophe, Y; Cornelis, J

1991-11-01

In a biomedical data processing environment, an essential requirement is the ability to integrate a large class of standard modules for the acquisition, processing and display of the (image) data. Our approach to the management and manipulation of the different data formats is based on the specification of a common standard for the representation of data formats, called 'data nature descriptions' to emphasise that this representation not only specifies the structure but also the contents of data objects (files). The idea behind this concept is to associate each hardware and software component that produces or uses medical data with a description of the data objects manipulated by that component. In our approach a special software module (a format convertor generator) takes care of the appropriate data format conversions, required when two or more components of the system exchange data.

Estimating Cosmic-Ray Spectral Parameters from Simulated Detector Responses with Detector Design Implications

NASA Technical Reports Server (NTRS)

Howell, L. W.

2001-01-01

A simple power law model consisting of a single spectral index (alpha-1) is believed to be an adequate description of the galactic cosmic-ray (GCR) proton flux at energies below 10(exp 13) eV, with a transition at knee energy (E(sub k)) to a steeper spectral index alpha-2 > alpha-1 above E(sub k). The maximum likelihood procedure is developed for estimating these three spectral parameters of the broken power law energy spectrum from simulated detector responses. These estimates and their surrounding statistical uncertainty are being used to derive the requirements in energy resolution, calorimeter size, and energy response of a proposed sampling calorimeter for the Advanced Cosmic-ray Composition Experiment for the Space Station (ACCESS). This study thereby permits instrument developers to make important trade studies in design parameters as a function of the science objectives, which is particularly important for space-based detectors where physical parameters, such as dimension and weight, impose rigorous practical limits to the design envelope.

L-alpha intensity in coronal streamers

NASA Technical Reports Server (NTRS)

Noci, G.; Poletto, G.; Suess, S. T.; Wang, A.-H.; Wu, S. T.

1993-01-01

White-light images are presently the primary source of information on physical conditions in the solar corona at distances greater than a few tenths of a solar radius above the limb. As a consequence, we still only have an incomplete description of structures extending beyond the solar limb. In particular, streamers, although observed for decades, represent a poorly known phenomenon. SOHO, to be launched in 1995, will be able to make long-term observations of these features up to heights of a few solar radii, both in white light and UV. In this paper we present simulations of L-alpha intensity in coronal streamers, based on the two-dimensional (2D) model developed by Wang et at. (1992, 1993) via a time-dependent numerical relaxation approach. Because the model is 2D, we make an a priori hypothesis about the extension of streamers in the third dimension. L-alpha data, obtained from a rocket (Kohl et al., 1983), allowed us to identify a shape which fits the observations.

Validation of the Health-Promoting Lifestyle Profile II for Hispanic male truck drivers in the Southwest.

PubMed

Mullins, Iris L; O'Day, Trish; Kan, Tsz Yin

2013-08-01

The aims of the study were to validate the English and Spanish Versions of the Health-Promoting Lifestyle Profile II (HPLP II) with Hispanic male truck drivers and to determine if there were any differences in drivers' responses based on driving responsibility. The methods included a descriptive correlation design, the HPLP II (English and Spanish versions), and a demographic questionnaire. Fifty-two Hispanic drivers participated in the study. There were no significant differences in long haul and short haul drivers' responses to the HPLP II. Cronbach's alpha for the Spanish version was .97 and the subscales alphas ranged from .74 to .94. The English version alpha was .92 and the subscales ranged from .68 to .84. Findings suggest the subscales of Health Responsibility, Physical Activities, Nutrition, and Spirituality Growth on the HPLP II Spanish and English versions may not adequately assess health-promoting behaviors and cultural influences for the Hispanic male population in the southwestern border region.

Simple Parametric Model for Airfoil Shape Description

NASA Astrophysics Data System (ADS)

Ziemkiewicz, David

2017-12-01

We show a simple, analytic equation describing a class of two-dimensional shapes well suited for representation of aircraft airfoil profiles. Our goal was to create a description characterized by a small number of parameters with easily understandable meaning, providing a tool to alter the shape with optimization procedures as well as manual tweaks by the designer. The generated shapes are well suited for numerical analysis with 2D flow solving software such as XFOIL.

Cost Estimation of Post Production Software Support in Ground Combat Systems

DTIC Science & Technology

2007-09-01

request, year of the request, EINOMEN (a word description of the system), and a PRON (a unique identifier containing the year and weapons system...variance. The fiscal year of request, descriptive name (coded as EINOMEN), unique program identifier ( PRON ), amount funded, and total amount requested...entire data set loses this sophistication. Most of the unique PRONs in the database map to a specific ground combat system, as described in the

Python based high-level synthesis compiler

NASA Astrophysics Data System (ADS)

Cieszewski, Radosław; Pozniak, Krzysztof; Romaniuk, Ryszard

2014-11-01

This paper presents a python based High-Level synthesis (HLS) compiler. The compiler interprets an algorithmic description of a desired behavior written in Python and map it to VHDL. FPGA combines many benefits of both software and ASIC implementations. Like software, the mapped circuit is flexible, and can be reconfigured over the lifetime of the system. FPGAs therefore have the potential to achieve far greater performance than software as a result of bypassing the fetch-decode-execute operations of traditional processors, and possibly exploiting a greater level of parallelism. Creating parallel programs implemented in FPGAs is not trivial. This article describes design, implementation and first results of created Python based compiler.

Report on the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3)

NASA Astrophysics Data System (ADS)

Katz, Daniel S.; Choi, Sou-Cheng T.; Niemeyer, Kyle E.; Hetherington, James; Löffler, Frank; Gunter, Dan; Idaszak, Ray; Brandt, Steven R.; Miller, Mark A.; Gesing, Sandra; Jones, Nick D.; Weber, Nic; Marru, Suresh; Allen, Gabrielle; Penzenstadler, Birgit; Venters, Colin C.; Davis, Ethan; Hwang, Lorraine; Todorov, Ilian; Patra, Abani; de Val-Borro, Miguel

2016-02-01

This report records and discusses the Third Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE3). The report includes a description of the keynote presentation of the workshop, which served as an overview of sustainable scientific software. It also summarizes a set of lightning talks in which speakers highlighted to-the-point lessons and challenges pertaining to sustaining scientific software. The final and main contribution of the report is a summary of the discussions, future steps, and future organization for a set of self-organized working groups on topics including developing pathways to funding scientific software; constructing useful common metrics for crediting software stakeholders; identifying principles for sustainable software engineering design; reaching out to research software organizations around the world; and building communities for software sustainability. For each group, we include a point of contact and a landing page that can be used by those who want to join that group's future activities. The main challenge left by the workshop is to see if the groups will execute these activities that they have scheduled, and how the WSSSPE community can encourage this to happen.

Precise Documentation: The Key to Better Software

NASA Astrophysics Data System (ADS)

Parnas, David Lorge

The prime cause of the sorry “state of the art” in software development is our failure to produce good design documentation. Poor documentation is the cause of many errors and reduces efficiency in every phase of a software product's development and use. Most software developers believe that “documentation” refers to a collection of wordy, unstructured, introductory descriptions, thousands of pages that nobody wanted to write and nobody trusts. In contrast, Engineers in more traditional disciplines think of precise blueprints, circuit diagrams, and mathematical specifications of component properties. Software developers do not know how to produce precise documents for software. Software developments also think that documentation is something written after the software has been developed. In other fields of Engineering much of the documentation is written before and during the development. It represents forethought not afterthought. Among the benefits of better documentation would be: easier reuse of old designs, better communication about requirements, more useful design reviews, easier integration of separately written modules, more effective code inspection, more effective testing, and more efficient corrections and improvements. This paper explains how to produce and use precise software documentation and illustrate the methods with several examples.

Evaluation of Visualization Software

NASA Technical Reports Server (NTRS)

Globus, Al; Uselton, Sam

1995-01-01

Visualization software is widely used in scientific and engineering research. But computed visualizations can be very misleading, and the errors are easy to miss. We feel that the software producing the visualizations must be thoroughly evaluated and the evaluation process as well as the results must be made available. Testing and evaluation of visualization software is not a trivial problem. Several methods used in testing other software are helpful, but these methods are (apparently) often not used. When they are used, the description and results are generally not available to the end user. Additional evaluation methods specific to visualization must also be developed. We present several useful approaches to evaluation, ranging from numerical analysis of mathematical portions of algorithms to measurement of human performance while using visualization systems. Along with this brief survey, we present arguments for the importance of evaluations and discussions of appropriate use of some methods.

Descriptions of Free and Freeware Software in the Mathematics Teaching

NASA Astrophysics Data System (ADS)

Antunes de Macedo, Josue; Neves de Almeida, Samara; Voelzke, Marcos Rincon

2016-05-01

This paper presents the analysis and the cataloging of free and freeware mathematical software available on the internet, a brief explanation of them, and types of licenses for use in teaching and learning. The methodology is based on the qualitative research. Among the different types of software found, it stands out in algebra, the Winmat, that works with linear algebra, matrices and linear systems. In geometry, the GeoGebra, which can be used in the study of functions, plan and spatial geometry, algebra and calculus. For graphing, can quote the Graph and Graphequation. With Graphmatica software, it is possible to build various graphs of mathematical equations on the same screen, representing cartesian equations, inequalities, parametric among other functions. The Winplot allows the user to build graphics in two and three dimensions functions and mathematical equations. Thus, this work aims to present the teachers some free math software able to be used in the classroom.

Achieving reutilization of scheduling software through abstraction and generalization

NASA Technical Reports Server (NTRS)

Wilkinson, George J.; Monteleone, Richard A.; Weinstein, Stuart M.; Mohler, Michael G.; Zoch, David R.; Tong, G. Michael

1995-01-01

Reutilization of software is a difficult goal to achieve particularly in complex environments that require advanced software systems. The Request-Oriented Scheduling Engine (ROSE) was developed to create a reusable scheduling system for the diverse scheduling needs of the National Aeronautics and Space Administration (NASA). ROSE is a data-driven scheduler that accepts inputs such as user activities, available resources, timing contraints, and user-defined events, and then produces a conflict-free schedule. To support reutilization, ROSE is designed to be flexible, extensible, and portable. With these design features, applying ROSE to a new scheduling application does not require changing the core scheduling engine, even if the new application requires significantly larger or smaller data sets, customized scheduling algorithms, or software portability. This paper includes a ROSE scheduling system description emphasizing its general-purpose features, reutilization techniques, and tasks for which ROSE reuse provided a low-risk solution with significant cost savings and reduced software development time.

Relationship Between Psychological Empowerment and Productivity of Medical Librarians

PubMed Central

Zare, Maliheh; Zarmehr, Fateme; Ashrafi-rizi, Hasan

2015-01-01

Introduction: Psychological empowerment is really important and has remarkable effect on different organizational variables such as job satisfaction, organizational commitment, productivity, etc. So the aim of this study was to investigate the relationship between psychological empowerment and productivity of Librarians in Isfahan Medical University. Methods: This was correlational research. Data were collected through two questionnaires. Psychological empowerment questionnaire and the manpower productivity questionnaire of Gold. Smith Hersey which their content validity was confirmed by experts and their reliability was obtained by using Cronbach’s Alpha coefficient, 0.89 and 0.9 respectively. Due to limited statistical population, did not used sampling and review was taken via census. So 76 number of librarians were evaluated. Information were reported on both descriptive and inferential statistics (correlation coefficient tests Pearson, Spearman, T-test, ANOVA), and analyzed by using the SPSS19 software. Findings: In our study, the trust between partners and efficacy with productivity had the highest correlation. Also there was a direct relationship between psychological empowerment and the productivity of labor (r =0.204). In other words, with rising of mean score of psychological empowerment, the mean score of efficiency increase too. Conclusions: The results showed that if development programs of librarian’s psychological empowerment increase in order to their productivity, librarians carry out their duties with better sense. Also with using the capabilities of librarians, the development of creativity with happen and organizational productivity will increase. PMID:26236079

Evaluation of Nursing Information Systems: Application of Usability Aspects in the Development of Systems.

PubMed

Moghaddasi, Hamid; Rabiei, Reza; Asadi, Farkhondeh; Ostvan, Negin

2017-04-01

As the largest group providing healthcare services, nurses require well-designed information systems in their practice. This study aims to evaluate the usability of nursing information systems (NIS). This cross-sectional survey was conducted in 2015. The settings of the study consisted of four hospitals affiliated with three medical universities in Tehran (Iran). The subjects of the study included nurses who had access to and used a NIS developed by four major software companies. The data were collected using a modified version of a usability questionnaire known as IsoMetrics, based on the International Standard ISO 9241, Part 11. The questionnaire is composed of 35 questions divided into seven general criteria. The validity of the questionnaire was determined by experts in the field, and the reliability was checked using Cronbach's alpha (α = 0.91). The questionnaire was then distributed to 184 nurses. The response rate was 64.6%. Among the seven ISO usability criteria, suitability for the task (3.10 ± 1.24) and suitability for learning (3.10 ± 1.27) had the highest mean value. The lowest mean value (2.37 ± 1.29) was related to the suitability for individualization. Addressing issues related to individualization and self-descriptiveness could improve the usability of nursing systems. Considering usability requirements in the design of a NIS will lead to the efficient and effective use of these systems.

The relationship between work-family conflict and the level of self-efficacy in female nurses in Alzahra Hospital.

PubMed

Baghban, Iran; Malekiha, Marziyeh; Fatehizadeh, Maryam

2010-01-01

Work-family conflict has many negative outcomes for organization and career and family life of each person. The aim of present study was to determine the relationship between work-family conflict and the level of self-efficacy in female nurses. In this cross-sectional descriptive research, the relationship between work-family conflict and the level of self-efficacy in female nurses of Alzahra Hospital was assessed. Questionnaire, demographic data form, work-family conflict scale and self-efficacy scale were the data collection tools. Content analysis and Cronbach's alpha were used for evaluating the validity and reliability of questionnaire. The study sample included 160 nurses (80 permanent nurses and 80 contract-based nurses) selected through simple random sampling from nurses working in different wards of Alzahra Hospital. Data analysis was done using SPSS software. There was significant difference in work-family conflict between the two groups of permanent and contract-based nurses (p = 0.02). Also, a significant difference in the level of self-efficacy was observed between the two groups of nurses (p = 0.03). The level of self-efficacy and work-family conflict in contract-based nurses was not acceptable. Therefore, it is suggested to arrange courses to train effective skills in the field of management of work-family conflicts in order to increase the level of self-efficacy for contract-based nurses.

Relationship Between Psychological Empowerment and Productivity of Medical Librarians.

PubMed

Zare, Maliheh; Zarmehr, Fateme; Ashrafi-Rizi, Hasan

2015-06-01

Psychological empowerment is really important and has remarkable effect on different organizational variables such as job satisfaction, organizational commitment, productivity, etc. So the aim of this study was to investigate the relationship between psychological empowerment and productivity of Librarians in Isfahan Medical University. This was correlational research. Data were collected through two questionnaires. Psychological empowerment questionnaire and the manpower productivity questionnaire of Gold. Smith Hersey which their content validity was confirmed by experts and their reliability was obtained by using Cronbach's Alpha coefficient, 0.89 and 0.9 respectively. Due to limited statistical population, did not used sampling and review was taken via census. So 76 number of librarians were evaluated. Information were reported on both descriptive and inferential statistics (correlation coefficient tests Pearson, Spearman, T-test, ANOVA), and analyzed by using the SPSS19 software. In our study, the trust between partners and efficacy with productivity had the highest correlation. Also there was a direct relationship between psychological empowerment and the productivity of labor (r =0.204). In other words, with rising of mean score of psychological empowerment, the mean score of efficiency increase too. The results showed that if development programs of librarian's psychological empowerment increase in order to their productivity, librarians carry out their duties with better sense. Also with using the capabilities of librarians, the development of creativity with happen and organizational productivity will increase.

Comment on de-averaged back-angle heavy-ion elastic scattering excitation functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hussein, M.S.; Canto, L.F.; Donangelo, R.

1984-06-01

It is suggested that the de-averaged 180/sup 0/ excitation function of /sup 16/O+ /sup 28/Si, recently considered by Frahn and Kaufmann, is strongly model dependent. Within a multistep ..cap alpha..-transfer description of the back-angle anomaly, we obtain a de-averaged 180/sup 0/ excitation function that exhibits a more regular gross structure.

NASA Marshall Space Flight Center Solar Observatory report, January - June 1990

NASA Technical Reports Server (NTRS)

Smith, James E.

1990-01-01

A description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility is presented and a summary of its observations and data reduction is given. The systems that make up the facility are a magnetograph telescope, an H alpha telescope, a Questar telescope, and a computer code. The data are represented by longitudinal contours with azimuth plots.

NASA Marshall Space Flight Center solar observatory

NASA Technical Reports Server (NTRS)

Smith, James E.

1988-01-01

A description is provided of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and a summary is given of its observations and data reduction during Jan. to Mar. 1988. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer center. The data are represented by longitudinal contours with azimuth plots.

Effect of Items Direction (Positive or Negative) on the Reliability in Likert Scale. Paper-11

ERIC Educational Resources Information Center

Gul, Showkeen Bilal Ahmad; Qasem, Mamun Ali Naji; Bhat, Mehraj Ahmad

2015-01-01

In this paper an attempt was made to analyze the effect of items direction (positive or negative) on the Alpha Cronbach reliability coefficient and the Split Half reliability coefficient in Likert scale. The descriptive survey research method was used for the study and sample of 510 undergraduate students were selected by used random sampling…

Evaluation of apoptosis indexes in currently used oral alpha- blockers in prostate: a pilot study

PubMed Central

Demir, Mehmet; Akin, Yigit; Terim, Kubra Asena Kapakin; Gulum, Mehmet; Buyukfirat, Evren; Ciftci, Halil; Yeni, Ercan

2018-01-01

ABSTRACT Objectives: Apoptosis effect of oral alpha-blockers is known in the prostate. Apoptosis index of silodosin has not been proved, yet. Aims are to present apoptosis index of silodosin in prostate and to compare this with other currently used alpha-blocker's apoptosis indexes together with their clinical effects. Materials and Methods: Benign prostatic hyperplasia (BPH) patients were enrolled among those admitted to urology outpatient clinic between June 2014 and June 2015. Study groups were created according to randomly prescribed oral alpha-blocker drugs as silodosin 8mg (Group 1; n=24), tamsulosin 0.4mg (Group 2; n=30), alfuzosin 10mg (Group 3; n=25), doxazosin 8mg (Group 4; n=22), terazosin 5mg (Group 5; n=15). Pa- tients who refused to use any alpha-blocker drug were included into Group 6 as control group (n=16). We investigated apoptosis indexes of the drugs in prostatic tissues that were taken from patient's surgery (transurethral resection of prostate) and/or prostate biopsies. Immunochemical dyeing, light microscope, and Image Processing and Analy- sis in Java were used for evaluations. Statistical significant p was p<0.05. Results: There were 132 patients with mean follow-up of 4.2±2.1 months. Pathologist researched randomly selected 10 areas in each microscope set. Group 1 showed statisti- cal significant difference apoptosis index in immunochemical TUNEL dyeing and im- age software (p<0.001). Moreover, we determined superior significant development in parameters as uroflowmetry, quality of life scores, and international prostate symptom score in Group 1. Conclusions: Silodosin has higher apoptosis effect than other alpha-blockers in prostate. Thus, clinic improvement with silodosin was proved by histologic studies. Besides, static factor of BPH may be overcome with creating apoptosis. PMID:29617082

Evaluation of apoptosis indexes in currently used oral alpha-blockers in prostate: a pilot study.

PubMed

Demir, Mehmet; Akin, Yigit; Terim, Kubra Asena Kapakin; Gulum, Mehmet; Buyukfirat, Evren; Ciftci, Halil; Yeni, Ercan

2018-01-01

Apoptosis effect of oral alpha-blockers is known in the prostate. Apoptosis index of silodosin has not been proved, yet. Aims are to present apoptosis index of silodosin in prostate and to compare this with other currently used alpha-blocker's apoptosis indexes together with their clinical effects. Benign prostatic hyperplasia (BPH) patients were enrolled among those admitted to urology outpatient clinic between June 2014 and June 2015. Study groups were created according to randomly prescribed oral alpha-blocker drugs as silodosin 8mg (Group 1; n=24), tamsulosin 0.4mg (Group 2; n=30), alfuzosin 10mg (Group 3; n=25), doxazosin 8mg (Group 4; n=22), terazosin 5mg (Group 5; n=15). Patients who refused to use any alpha-blocker drug were included into Group 6 as control group (n=16). We investigated apoptosis indexes of the drugs in prostatic tissues that were taken from patient's surgery (transurethral resection of prostate) and/or prostate biopsies. Immunochemical dyeing, light microscope, and Image Processing and Analysis in Java were used for evaluations. Statistical significant p was p<0.05. There were 132 patients with mean follow-up of 4.2±2.1 months. Pathologist researched randomly selected 10 areas in each microscope set. Group 1 showed statistical significant difference apoptosis index in immunochemical TUNEL dyeing and image software (p<0.001). Moreover, we determined superior significant development in parameters as uroflowmetry, quality of life scores, and international prostate symptom score in Group 1. Silodosin has higher apoptosis effect than other alpha-blockers in prostate. Thus, clinic improvement with silodosin was proved by histologic studies. Besides, static factor of BPH may be overcome with creating apoptosis. Copyright® by the International Brazilian Journal of Urology.

Distributed Processing of Sentinel-2 Products using the BIGEARTH Platform

NASA Astrophysics Data System (ADS)

Bacu, Victor; Stefanut, Teodor; Nandra, Constantin; Mihon, Danut; Gorgan, Dorian

2017-04-01

The constellation of observational satellites orbiting around Earth is constantly increasing, providing more data that need to be processed in order to extract meaningful information and knowledge from it. Sentinel-2 satellites, part of the Copernicus Earth Observation program, aim to be used in agriculture, forestry and many other land management applications. ESA's SNAP toolbox can be used to process data gathered by Sentinel-2 satellites but is limited to the resources provided by a stand-alone computer. In this paper we present a cloud based software platform that makes use of this toolbox together with other remote sensing software applications to process Sentinel-2 products. The BIGEARTH software platform [1] offers an integrated solution for processing Earth Observation data coming from different sources (such as satellites or on-site sensors). The flow of processing is defined as a chain of tasks based on the WorDeL description language [2]. Each task could rely on a different software technology (such as Grass GIS and ESA's SNAP) in order to process the input data. One important feature of the BIGEARTH platform comes from this possibility of interconnection and integration, throughout the same flow of processing, of the various well known software technologies. All this integration is transparent from the user perspective. The proposed platform extends the SNAP capabilities by enabling specialists to easily scale the processing over distributed architectures, according to their specific needs and resources. The software platform [3] can be used in multiple configurations. In the basic one the software platform runs as a standalone application inside a virtual machine. Obviously in this case the computational resources are limited but it will give an overview of the functionalities of the software platform, and also the possibility to define the flow of processing and later on to execute it on a more complex infrastructure. The most complex and robust configuration is based on cloud computing and allows the installation on a private or public cloud infrastructure. In this configuration, the processing resources can be dynamically allocated and the execution time can be considerably improved by the available virtual resources and the number of parallelizable sequences in the processing flow. The presentation highlights the benefits and issues of the proposed solution by analyzing some significant experimental use cases. Main references for further information: [1] BigEarth project, http://cgis.utcluj.ro/projects/bigearth [2] Constantin Nandra, Dorian Gorgan: "Defining Earth data batch processing tasks by means of a flexible workflow description language", ISPRS Ann. Photogramm. Remote Sens. Spatial Inf. Sci., III-4, 59-66, (2016). [3] Victor Bacu, Teodor Stefanut, Dorian Gorgan, "Adaptive Processing of Earth Observation Data on Cloud Infrastructures Based on Workflow Description", Proceedings of the Intelligent Computer Communication and Processing (ICCP), IEEE-Press, pp.444-454, (2015).

Ground Software Maintenance Facility (GSMF) user's manual

NASA Technical Reports Server (NTRS)

Aquila, V.; Derrig, D.; Griffith, G.

1986-01-01

Instructions for the Ground Software Maintenance Facility (GSMF) system user is provided to operate the GSMF in all modes. The GSMF provides the resources for the Automatic Test Equipment (ATE) computer program maintenance (GCOS and GOAL). Applicable reference documents are listed. An operational overview and descriptions of the modes in terms of operator interface, options, equipment, material utilization, and operational procedures are contained. Test restart procedures are described. The GSMF documentation tree is presented including the user manual.

Dissecting the COW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linstadt, E.

1985-10-01

The COW, or Console On Wheels, is the primary operator interface to the SLC accelerator control system. A hardware and software description of the COW, a microcomputer based system with a color graphics display output and touchpanel and knob inputs, is given. The ease of development and expandability, due to both the modular nature of the hardware and the multitasking, interrupt driven software running in the COW, are described. Integration of the COW into the SLCNET communications network and SLC Control system is detailed.

Software Product Lines: Report of the 2010 US Army Software Product Line Workshop

DTIC Science & Technology

2010-06-01

requirements and statement of work ( SOW ) tasks can be in- cluded in the request for proposal (RFP) and the contract. 2.2.1 Basic Product Line Acquisition... SOW tasks in Figure 1. Two additional tasks (at the third tier level) ac- count for sustaining the production capability over the life cycle and...Acquisition Strategy RFP and SOW Initial Product Line Scope Product Line Business Case Capability Description Document Teaming Product Line

Computer software configuration description, 241-AY and 241 AZ tank farm MICON automation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winkelman, W.D.

This document describes the configuration process, choices and conventions used during the Micon DCS configuration activities, and issues involved in making changes to the configuration. Includes the master listings of the Tag definitions, which should be revised to authorize any changes. Revision 3 provides additional information on the software used to provide communications with the W-320 project and incorporates minor changes to ensure the document alarm setpoint priorities correctly match operational expectations.

YAMM - Yet Another Menu Manager

NASA Technical Reports Server (NTRS)

Mazer, Alan S.; Weidner, Richard J.

1991-01-01

Yet Another Menu Manager (YAMM) computer program an application-independent menuing package of software designed to remove much difficulty and save much time inherent in implementation of front ends of large packages of software. Provides complete menuing front end for wide variety of applications, with provisions for independence from specific types of terminals, configurations that meet specific needs of users, and dynamic creation of menu trees. Consists of two parts: description of menu configuration and body of application code. Written in C.

Component-based integration of chemistry and optimization software.

PubMed

Kenny, Joseph P; Benson, Steven J; Alexeev, Yuri; Sarich, Jason; Janssen, Curtis L; McInnes, Lois Curfman; Krishnan, Manojkumar; Nieplocha, Jarek; Jurrus, Elizabeth; Fahlstrom, Carl; Windus, Theresa L

2004-11-15

Typical scientific software designs make rigid assumptions regarding programming language and data structures, frustrating software interoperability and scientific collaboration. Component-based software engineering is an emerging approach to managing the increasing complexity of scientific software. Component technology facilitates code interoperability and reuse. Through the adoption of methodology and tools developed by the Common Component Architecture Forum, we have developed a component architecture for molecular structure optimization. Using the NWChem and Massively Parallel Quantum Chemistry packages, we have produced chemistry components that provide capacity for energy and energy derivative evaluation. We have constructed geometry optimization applications by integrating the Toolkit for Advanced Optimization, Portable Extensible Toolkit for Scientific Computation, and Global Arrays packages, which provide optimization and linear algebra capabilities. We present a brief overview of the component development process and a description of abstract interfaces for chemical optimizations. The components conforming to these abstract interfaces allow the construction of applications using different chemistry and mathematics packages interchangeably. Initial numerical results for the component software demonstrate good performance, and highlight potential research enabled by this platform.

Space Communication and Navigation SDR Testbed, Overview and Opportunity for Experiments

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

2013-01-01

NASA has developed an experimental flight payload (referred to as the Space Communication and Navigation (SCAN) Test Bed) to investigate software defined radio (SDR) communications, networking, and navigation technologies, operationally in the space environment. The payload consists of three software defined radios each compliant to NASAs Space Telecommunications Radio System Architecture, a common software interface description standard for software defined radios. The software defined radios are new technology developments underway by NASA and industry partners launched in 2012. The payload is externally mounted to the International Space Station truss to conduct experiments representative of future mission capability. Experiment operations include in-flight reconfiguration of the SDR waveform functions and payload networking software. The flight system will communicate with NASAs orbiting satellite relay network, the Tracking and Data Relay Satellite System at both S-band and Ka-band and to any Earth-based compatible S-band ground station. The system is available for experiments by industry, academia, and other government agencies to participate in the SDR technology assessments and standards advancements.

[Job stressors in software developers--a comparison with other occupations].

PubMed

Kadokura, M

1997-09-01

The aim of this study is to investigate the difference in job stressors among software developers, the sales staff and the clerical staff (n = 2,079) in two companies (A Co. and B Co.) using a self-administered questionnaire that included a job stressor scale and the 30-item General Health Questionnaire (GHQ). We developed the job stressor scale based on the interviews with out-patients who engaged in software development and previous studies about job stressors. Factor analysis with a seven-factor solution showed that seven subscales were abstracted from the job stressor scale, namely, quantitative load of work, dissatisfaction with work, demanding work, uneasiness about work, human relations, ambiguity of work and shortage of private time. Each subscale was significantly (r = .313-.442, p < 0.0001) correlated with the GHQ score and proved to be a reliable instrument, as indicated by a Cronbach's alpha of greater than 0.73. Stepwise multiple regression analysis revealed that quantitative load of work and shortage of private time subscale scores were significantly high in software developers in A Co. Software developers in A Co. tended to score higher (P < .10) than the others in demanding work and ambiguity of work subscale. All subscale scores were significantly low in the clerical staff in B Co. There was no significant difference between the sales staff and software developers in B Co. Results of the interviews with out-patients showed that demanding work, hard deadline, ambiguity of work and precarious work would cause trouble in software developers. The implications of these findings with respect to occupational issues related to software developers are discussed.

Advanced crew procedures development techniques: Procedures and performance program description

NASA Technical Reports Server (NTRS)

Arbet, J. D.; Mangiaracina, A. A.

1975-01-01

The Procedures and Performance Program (PPP) for operation in conjunction with the Shuttle Procedures Simulator (SPS) is described. The PPP user interface, the SPS/PPP interface, and the PPP applications software are discussed.

Do Drills Make Drones?

ERIC Educational Resources Information Center

McKibbin, Wendy Lea

1986-01-01

Examines the shift in schools toward using software that teaches critical thinking skills. A list of 14 packages is also provided, with each entry including name, recommended age level(s), current cost, source, and a brief description. (JN)

Microcomputer data acquisition and control.

PubMed

East, T D

1986-01-01

In medicine and biology there are many tasks that involve routine well defined procedures. These tasks are ideal candidates for computerized data acquisition and control. As the performance of microcomputers rapidly increases and cost continues to go down the temptation to automate the laboratory becomes great. To the novice computer user the choices of hardware and software are overwhelming and sadly most of the computer sales persons are not at all familiar with real-time applications. If you want to bill your patients you have hundreds of packaged systems to choose from; however, if you want to do real-time data acquisition the choices are very limited and confusing. The purpose of this chapter is to provide the novice computer user with the basics needed to set up a real-time data acquisition system with the common microcomputers. This chapter will cover the following issues necessary to establish a real time data acquisition and control system: Analysis of the research problem: Definition of the problem; Description of data and sampling requirements; Cost/benefit analysis. Choice of Microcomputer hardware and software: Choice of microprocessor and bus structure; Choice of operating system; Choice of layered software. Digital Data Acquisition: Parallel Data Transmission; Serial Data Transmission; Hardware and software available. Analog Data Acquisition: Description of amplitude and frequency characteristics of the input signals; Sampling theorem; Specification of the analog to digital converter; Hardware and software available; Interface to the microcomputer. Microcomputer Control: Analog output; Digital output; Closed-Loop Control. Microcomputer data acquisition and control in the 21st Century--What is in the future? High speed digital medical equipment networks; Medical decision making and artificial intelligence.

Flight test maneuvers for closed loop lateral-directional modeling of the F-18 High Alpha Research Vehicle (HARV) using forebody strakes

NASA Technical Reports Server (NTRS)

Morelli, E. A.

1996-01-01

Flight test maneuvers are specified for the F-18 High Alpha Research Vehicle (HARV). The maneuvers were designed for closed loop parameter identification purposes, specifically for lateral linear model parameter estimation at 30, 45, and 60 degrees angle of attack, using the Actuated Nose Strakes for Enhanced Rolling (ANSER) control law in Strake (S) model and Strake/Thrust Vectoring (STV) mode. Each maneuver is to be realized by applying square wave inputs to specific pilot station controls using the On-Board Excitation System (OBES). Maneuver descriptions and complete specification of the time/amplitude points defining each input are included, along with plots of the input time histories.

F-18 High Alpha Research Vehicle (HARV) parameter identification flight test maneuvers for optimal input design validation and lateral control effectiveness

NASA Technical Reports Server (NTRS)

Morelli, Eugene A.

1995-01-01

Flight test maneuvers are specified for the F-18 High Alpha Research Vehicle (HARV). The maneuvers were designed for open loop parameter identification purposes, specifically for optimal input design validation at 5 degrees angle of attack, identification of individual strake effectiveness at 40 and 50 degrees angle of attack, and study of lateral dynamics and lateral control effectiveness at 40 and 50 degrees angle of attack. Each maneuver is to be realized by applying square wave inputs to specific control effectors using the On-Board Excitation System (OBES). Maneuver descriptions and complete specifications of the time/amplitude points define each input are included, along with plots of the input time histories.

Software reuse in spacecraft planning and scheduling systems

NASA Technical Reports Server (NTRS)

Mclean, David; Tuchman, Alan; Broseghini, Todd; Yen, Wen; Page, Brenda; Johnson, Jay; Bogovich, Lynn; Burkhardt, Chris; Mcintyre, James; Klein, Scott

1993-01-01

The use of a software toolkit and development methodology that supports software reuse is described. The toolkit includes source-code-level library modules and stand-alone tools which support such tasks as data reformatting and report generation, simple relational database applications, user interfaces, tactical planning, strategic planning and documentation. The current toolkit is written in C and supports applications that run on IBM-PC's under DOS and UNlX-based workstations under OpenLook and Motif. The toolkit is fully integrated for building scheduling systems that reuse AI knowledge base technology. A typical scheduling scenario and three examples of applications that utilize the reuse toolkit will be briefly described. In addition to the tools themselves, a description of the software evolution and reuse methodology that was used is presented.

Advanced program development management software system. Software description and user's manual

NASA Technical Reports Server (NTRS)

1990-01-01

The objectives of this project were to apply emerging techniques and tools from the computer science discipline of paperless management to the activities of the Space Transportation and Exploration Office (PT01) in Marshall Space Flight Center (MSFC) Program Development, thereby enhancing the productivity of the workforce, the quality of the data products, and the collection, dissemination, and storage of information. The approach used to accomplish the objectives emphasized the utilization of finished form (off-the-shelf) software products to the greatest extent possible without impacting the performance of the end product, to pursue developments when necessary in the rapid prototyping environment to provide a mechanism for frequent feedback from the users, and to provide a full range of user support functions during the development process to promote testing of the software.

An empirical evaluation of software quality assurance practices and challenges in a developing country: a comparison of Nigeria and Turkey.

PubMed

Sowunmi, Olaperi Yeside; Misra, Sanjay; Fernandez-Sanz, Luis; Crawford, Broderick; Soto, Ricardo

2016-01-01

The importance of quality assurance in the software development process cannot be overemphasized because its adoption results in high reliability and easy maintenance of the software system and other software products. Software quality assurance includes different activities such as quality control, quality management, quality standards, quality planning, process standardization and improvement amongst others. The aim of this work is to further investigate the software quality assurance practices of practitioners in Nigeria. While our previous work covered areas on quality planning, adherence to standardized processes and the inherent challenges, this work has been extended to include quality control, software process improvement and international quality standard organization membership. It also makes comparison based on a similar study carried out in Turkey. The goal is to generate more robust findings that can properly support decision making by the software community. The qualitative research approach, specifically, the use of questionnaire research instruments was applied to acquire data from software practitioners. In addition to the previous results, it was observed that quality assurance practices are quite neglected and this can be the cause of low patronage. Moreover, software practitioners are neither aware of international standards organizations or the required process improvement techniques; as such their claimed standards are not aligned to those of accredited bodies, and are only limited to their local experience and knowledge, which makes it questionable. The comparison with Turkey also yielded similar findings, making the results typical of developing countries. The research instrument used was tested for internal consistency using the Cronbach's alpha, and it was proved reliable. For the software industry in developing countries to grow strong and be a viable source of external revenue, software assurance practices have to be taken seriously because its effect is evident in the final product. Moreover, quality frameworks and tools which require minimum time and cost are highly needed in these countries.

Functional Development of the Octenol Response in Aedes aegypti

DTIC Science & Technology

2013-03-07

and AgGr24 genes (Jones et al., 2007; Lu et al., 2007), the orthologs of the Drosophila melanogaster CO2 receptors Gr21a and Gr63a (Jones et al... genome with TopHat (Trapnell et al., 2009). Resulting sequence alignment files were uploaded into the Avadis NGS software (Strand Scientific...isolated following the manufacturer’s protocol and sent to the Genomic Services Lab at Hudson Alpha Institute for Biotechnology (Huntsville, Alabama

Sirocco Storage Server v. pre-alpha 0.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curry, Matthew L.; Danielson, Geoffrey; Ward, H. Lee

Sirocco is a parallel storage system under development, designed for write-intensive workloads on large-scale HPC platforms. It implements a keyvalue object store on top of a set of loosely federated storage servers that cooperate to ensure data integrity and performance. It includes support for a range of different types of storage transactions. This software release constitutes a conformant storage server, along with the client-side libraries to access the storage over a network.

A Matrix Approach to Software Process Definition

NASA Technical Reports Server (NTRS)

Schultz, David; Bachman, Judith; Landis, Linda; Stark, Mike; Godfrey, Sally; Morisio, Maurizio; Powers, Edward I. (Technical Monitor)

2000-01-01

The Software Engineering Laboratory (SEL) is currently engaged in a Methodology and Metrics program for the Information Systems Center (ISC) at Goddard Space Flight Center (GSFC). This paper addresses the Methodology portion of the program. The purpose of the Methodology effort is to assist a software team lead in selecting and tailoring a software development or maintenance process for a specific GSFC project. It is intended that this process will also be compliant with both ISO 9001 and the Software Engineering Institute's Capability Maturity Model (CMM). Under the Methodology program, we have defined four standard ISO-compliant software processes for the ISC, and three tailoring criteria that team leads can use to categorize their projects. The team lead would select a process and appropriate tailoring factors, from which a software process tailored to the specific project could be generated. Our objective in the Methodology program is to present software process information in a structured fashion, to make it easy for a team lead to characterize the type of software engineering to be performed, and to apply tailoring parameters to search for an appropriate software process description. This will enable the team lead to follow a proven, effective software process and also satisfy NASA's requirement for compliance with ISO 9001 and the anticipated requirement for CMM assessment. This work is also intended to support the deployment of sound software processes across the ISC.

TGeoCad: an Interface between ROOT and CAD Systems

NASA Astrophysics Data System (ADS)

Luzzi, C.; Carminati, F.

2014-06-01

In the simulation of High Energy Physics experiment a very high precision in the description of the detector geometry is essential to achieve the required performances. The physicists in charge of Monte Carlo Simulation of the detector need to collaborate efficiently with the engineers working at the mechanical design of the detector. Often, this collaboration is made hard by the usage of different and incompatible software. ROOT is an object-oriented C++ framework used by physicists for storing, analyzing and simulating data produced by the high-energy physics experiments while CAD (Computer-Aided Design) software is used for mechanical design in the engineering field. The necessity to improve the level of communication between physicists and engineers led to the implementation of an interface between the ROOT geometrical modeler used by the virtual Monte Carlo simulation software and the CAD systems. In this paper we describe the design and implementation of the TGeoCad Interface that has been developed to enable the use of ROOT geometrical models in several CAD systems. To achieve this goal, the ROOT geometry description is converted into STEP file format (ISO 10303), which can be imported and used by many CAD systems.

Using XML and Java for Astronomical Instrumentation Control

NASA Technical Reports Server (NTRS)

Ames, Troy; Koons, Lisa; Sall, Ken; Warsaw, Craig

2000-01-01

Traditionally, instrument command and control systems have been highly specialized, consisting mostly of custom code that is difficult to develop, maintain, and extend. Such solutions are initially very costly and are inflexible to subsequent engineering change requests, increasing software maintenance costs. Instrument description is too tightly coupled with details of implementation. NASA Goddard Space Flight Center is developing a general and highly extensible framework that applies to any kind of instrument that can be controlled by a computer. The software architecture combines the platform independent processing capabilities of Java with the power of the Extensible Markup Language (XML), a human readable and machine understandable way to describe structured data. A key aspect of the object-oriented architecture is software that is driven by an instrument description, written using the Instrument Markup Language (IML). ]ML is used to describe graphical user interfaces to control and monitor the instrument, command sets and command formats, data streams, and communication mechanisms. Although the current effort is targeted for the High-resolution Airborne Wideband Camera, a first-light instrument of the Stratospheric Observatory for Infrared Astronomy, the framework is designed to be generic and extensible so that it can be applied to any instrument.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bosler, Peter

Stride Search provides a flexible tool for detecting storms or other extreme climate events in high-resolution climate data sets saved on uniform latitude-longitude grids in standard NetCDF format. Users provide the software a quantitative description of a meteorological event they are interested in; the software searches a data set for locations in space and time that meet the user’s description. In its first stage, Stride Search performs a spatial search of the data set at each timestep by dividing a search domain into circular sectors of constant geodesic radius. Data from a netCDF file is read into memory for eachmore » circular search sector. If the data meet or exceed a set of storm identification criteria (defined by the user), a storm is recorded to a linked list. Finally, the linked list is examined and duplicate detections of the same storm are removed and the results are written to an output file. The first stage’s output file is read by a second program that builds storm. Additional identification criteria may be applied at this stage to further classify storms. Storm tracks are the software’s ultimate output and routines are provided for formatting that output for various external software libraries for plotting and tabulating data.« less

A study of discrete control signal fault conditions in the shuttle DPS

NASA Technical Reports Server (NTRS)

Reddi, S. S.; Retter, C. T.

1976-01-01

An analysis of the effects of discrete failures on the data processing subsystem is presented. A functional description of each discrete together with a list of software modules that use this discrete are included. A qualitative description of the consequences that may ensue due to discrete failures is given followed by a probabilistic reliability analysis of the data processing subsystem. Based on the investigation conducted, recommendations were made to improve the reliability of the subsystem.

Configuration Analysis Tool (CAT). System Description and users guide (revision 1)

NASA Technical Reports Server (NTRS)

Decker, W.; Taylor, W.; Mcgarry, F. E.; Merwarth, P.

1982-01-01

A system description of, and user's guide for, the Configuration Analysis Tool (CAT) are presented. As a configuration management tool, CAT enhances the control of large software systems by providing a repository for information describing the current status of a project. CAT provides an editing capability to update the information and a reporting capability to present the information. CAT is an interactive program available in versions for the PDP-11/70 and VAX-11/780 computers.

Small Business Innovations

NASA Technical Reports Server (NTRS)

1992-01-01

The purpose of QASE RT is to enable system analysts and software engineers to evaluate performance and reliability implications of design alternatives. The program resulted from two Small Business Innovation Research (SBIR) projects. After receiving a description of the system architecture and workload from the user, QASE RT translates the system description into simulation models and executes them. Simulation provides detailed performance evaluation. The results of the evaluations are service and response times, offered load and device utilizations and functional availability.

Reviews.

ERIC Educational Resources Information Center

Repak, Arthur J.; And Others

1988-01-01

Computer software, audiovisuals, and books are reviewed. Includes topics on interfacing, ionic equilibrium, space, the classification system, Acquired Immune Disease Syndrome, evolution, human body processes, energy, pesticides, teaching school, cells, and geological aspects. Availability, price, and a description of each are provided. (RT)

Modular digital holographic fringe data processing system

NASA Technical Reports Server (NTRS)

Downward, J. G.; Vavra, P. C.; Schebor, F. S.; Vest, C. M.

1985-01-01

A software architecture suitable for reducing holographic fringe data into useful engineering data is developed and tested. The results, along with a detailed description of the proposed architecture for a Modular Digital Fringe Analysis System, are presented.

Tracing And Control Of Engineering Requirements

NASA Technical Reports Server (NTRS)

Turner, Philip R.; Stoller, Richard L.; Neville, Ted; Boyle, Karen A.

1991-01-01

TRACER (Tracing and Control of Engineering Requirements) is data-base/word-processing software system created to document and maintain order of both requirements and descriptions associated with engineering project. Implemented on IBM PC under PC-DOS. Written with CLIPPER.

Object-oriented requirements analysis: A quick tour

NASA Technical Reports Server (NTRS)

Berard, Edward V.

1990-01-01

Of all the approaches to software development, an object-oriented approach appears to be both the most beneficial and the most popular. The description of the object-oriented approach is presented in the form of the view graphs.

Accident Data Use and Geographic Information System (GIS)

DOT National Transportation Integrated Search

1998-09-16

Project Description: The Cheyenne Area Transportation Planning Process (ChATTP) : has developed a PowerPoint presentation demonstrating how to use an existing : accident database with GIS software. The slides are followed by a hands-on : demonstratio...

Experiences Teaching a Software Aided Mathematics Course for a General University Audience.

ERIC Educational Resources Information Center

McGivney, Raymond J., Jr.

1990-01-01

Described is a nonmajor mathematics course taught using computers and lab experiments. Included are the challenge, solution, description of the first class, problems, successes, the syllabus, student comments, and the conclusion. (KR)

Computer Administering of the Psychological Investigations: Set-Relational Representation

NASA Astrophysics Data System (ADS)

Yordzhev, Krasimir

Computer administering of a psychological investigation is the computer representation of the entire procedure of psychological assessments - test construction, test implementation, results evaluation, storage and maintenance of the developed database, its statistical processing, analysis and interpretation. A mathematical description of psychological assessment with the aid of personality tests is discussed in this article. The set theory and the relational algebra are used in this description. A relational model of data, needed to design a computer system for automation of certain psychological assessments is given. Some finite sets and relation on them, which are necessary for creating a personality psychological test, are described. The described model could be used to develop real software for computer administering of any psychological test and there is full automation of the whole process: test construction, test implementation, result evaluation, storage of the developed database, statistical implementation, analysis and interpretation. A software project for computer administering personality psychological tests is suggested.

Quantitative method of medication system interface evaluation.

PubMed

Pingenot, Alleene Anne; Shanteau, James; Pingenot, James D F

2007-01-01

The objective of this study was to develop a quantitative method of evaluating the user interface for medication system software. A detailed task analysis provided a description of user goals and essential activity. A structural fault analysis was used to develop a detailed description of the system interface. Nurses experienced with use of the system under evaluation provided estimates of failure rates for each point in this simplified fault tree. Means of estimated failure rates provided quantitative data for fault analysis. Authors note that, although failures of steps in the program were frequent, participants reported numerous methods of working around these failures so that overall system failure was rare. However, frequent process failure can affect the time required for processing medications, making a system inefficient. This method of interface analysis, called Software Efficiency Evaluation and Fault Identification Method, provides quantitative information with which prototypes can be compared and problems within an interface identified.

SED-ED, a workflow editor for computational biology experiments written in SED-ML.

PubMed

Adams, Richard R

2012-04-15

The simulation experiment description markup language (SED-ML) is a new community data standard to encode computational biology experiments in a computer-readable XML format. Its widespread adoption will require the development of software support to work with SED-ML files. Here, we describe a software tool, SED-ED, to view, edit, validate and annotate SED-ML documents while shielding end-users from the underlying XML representation. SED-ED supports modellers who wish to create, understand and further develop a simulation description provided in SED-ML format. SED-ED is available as a standalone Java application, as an Eclipse plug-in and as an SBSI (www.sbsi.ed.ac.uk) plug-in, all under an MIT open-source license. Source code is at https://sed-ed-sedmleditor.googlecode.com/svn. The application itself is available from https://sourceforge.net/projects/jlibsedml/files/SED-ED/.

The development of a program analysis environment for Ada

NASA Technical Reports Server (NTRS)

Brown, David B.; Carlisle, Homer W.; Chang, Kai-Hsiung; Cross, James H.; Deason, William H.; Haga, Kevin D.; Huggins, John R.; Keleher, William R. A.; Starke, Benjamin B.; Weyrich, Orville R.

1989-01-01

A unit level, Ada software module testing system, called Query Utility Environment for Software Testing of Ada (QUEST/Ada), is described. The project calls for the design and development of a prototype system. QUEST/Ada design began with a definition of the overall system structure and a description of component dependencies. The project team was divided into three groups to resolve the preliminary designs of the parser/scanner: the test data generator, and the test coverage analyzer. The Phase 1 report is a working document from which the system documentation will evolve. It provides history, a guide to report sections, a literature review, the definition of the system structure and high level interfaces, descriptions of the prototype scope, the three major components, and the plan for the remainder of the project. The appendices include specifications, statistics, two papers derived from the current research, a preliminary users' manual, and the proposal and work plan for Phase 2.

A knowledge based application of the extended aircraft interrogation and display system

NASA Technical Reports Server (NTRS)

Glover, Richard D.; Larson, Richard R.

1991-01-01

A family of multiple-processor ground support test equipment was used to test digital flight-control systems on high-performance research aircraft. A unit recently built for the F-18 high alpha research vehicle project is the latest model in a series called the extended aircraft interrogation and display system. The primary feature emphasized monitors the aircraft MIL-STD-1553B data buses and provides real-time engineering units displays of flight-control parameters. A customized software package was developed to provide real-time data interpretation based on rules embodied in a highly structured knowledge database. The configuration of this extended aircraft interrogation and display system is briefly described, and the evolution of the rule based package and its application to failure modes and effects testing on the F-18 high alpha research vehicle is discussed.

genepop'007: a complete re-implementation of the genepop software for Windows and Linux.

PubMed

Rousset, François

2008-01-01

This note summarizes developments of the genepop software since its first description in 1995, and in particular those new to version 4.0: an extended input format, several estimators of neighbourhood size under isolation by distance, new estimators and confidence intervals for null allele frequency, and less important extensions to previous options. genepop now runs under Linux as well as under Windows, and can be entirely controlled by batch calls. © 2007 The Author.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, David Edward

A description of the development of the mc_runjob software package used to manage large scale computing tasks for the D0 Experiment at Fermilab is presented, along with a review of the Digital Front End Trigger electronics and the software used to control them. A tracking study is performed on detector data to determine that the D0 Experiment can detect charged B mesons, and that these results are in accordance with current results. B mesons are found by searching for the decay channel B ± → J / Ψ K ± .

Dissecting the COW

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linstadt, E.

1985-04-01

The COW, or Console On Wheels, is the primary operator interface to the SLC accelerator control system. A hardware and software description of the COW, a microcomputer based system with a color graphics display output and touch-panel and knob inputs, is given. The ease of development and expandability, due to both the modular nature of the hardware and the multitasking, interrupt driven software running in the COW, are described. Integration of the COW into the SLCNET communications network and SLC Control system is detailed.

Sonic Onyx: Case Study of an Interactive Artwork

NASA Astrophysics Data System (ADS)

Ahmed, Salah Uddin; Jaccheri, Letizia; M'kadmi, Samir

Software supported art projects are increasing in numbers in recent years as artists are exploring how computing can be used to create new forms of live art. Interactive sound installation is one kind of art in this genre. In this article we present the development process and functional description of Sonic Onyx, an interactive sound installation. The objective is to show, through the life cycle of Sonic Onyx, how a software dependent interactive artwork involves its users and raises issues related to its interaction and functionalities.

A Software Engineering Environment for the Navy.

DTIC Science & Technology

1982-03-31

Engineering Pr.cess . - 55 ?art II: Description of A Software Engineering Env.Lonnmeut 1. Data Base ........................................ 7 -3 L.I...Methodology to Tool 1-54 2.2.2.2-6 Flow of Management: Activity to Methodology to Tool 21- 55 2.2.2.2-7 Pipelining for Activity-Specific Tools 11-56 A.1.1-1 A...testing techniques. 2.2. 2 Methodciogies and Tools: Correctness Analysis Pai e T- 4Metboioioo ies aews - Pev2.ews Jeicrmine the in ernai ’ Qolc .. ness and

Ada (Trade Name) Foundation Technology. Volume 4. Software Requirements for WIS (WWMCCS (World Wide Military Command and Control System) Information System) Text Processing Prototypes

DTIC Science & Technology

1986-12-01

graphics : The package allows a character set which can be defined by users giving the picture for a character by designating its pixels. Such characters...type lonts and gsei-oriented "help" messages tailored to the operations being performed and user expertise In general, critical design issues...other volumes include command language, software design , description and analysis tools, database management system operating systems; planning and

Microprocessor control system for 200-kilowatt Mod-OA wind turbines

NASA Technical Reports Server (NTRS)

Nyland, T. W.; Birchenough, A. G.

1982-01-01

The microprocessor system and program used to control the operation of the 200-kW Mod-OA wind turbines is described. The system is programmed to begin startup and shutdown sequences automatically and to control yaw motion. Rotor speed and power output are controlled with integral and proportional control of the blade pitch angle. Included in the report are a description of the hardware and a discussion of the software programming technique. A listing of the PL/M software program is given.

Scrutinizing UML Activity Diagrams

NASA Astrophysics Data System (ADS)

Al-Fedaghi, Sabah

Building an information system involves two processes: conceptual modeling of the “real world domain” and designing the software system. Object-oriented methods and languages (e.g., UML) are typically used for describing the software system. For the system analysis process that produces the conceptual description, object-oriented techniques or semantics extensions are utilized. Specifically, UML activity diagrams are the “flow charts” of object-oriented conceptualization tools. This chapter proposes an alternative to UML activity diagrams through the development of a conceptual modeling methodology based on the notion of flow.

Methodology of functionality selection for water management software and examples of its application.

PubMed

Vasilyev, K N

2013-01-01

When developing new software products and adapting existing software, project leaders have to decide which functionalities to keep, adapt or develop. They have to consider that the cost of making errors during the specification phase is extremely high. In this paper a formalised approach is proposed that considers the main criteria for selecting new software functions. The application of this approach minimises the chances of making errors in selecting the functions to apply. Based on the work on software development and support projects in the area of water resources and flood damage evaluation in economic terms at CH2M HILL (the developers of the flood modelling package ISIS), the author has defined seven criteria for selecting functions to be included in a software product. The approach is based on the evaluation of the relative significance of the functions to be included into the software product. Evaluation is achieved by considering each criterion and the weighting coefficients of each criterion in turn and applying the method of normalisation. This paper includes a description of this new approach and examples of its application in the development of new software products in the are of the water resources management.

SEP thrust subsystem performance sensitivity analysis

NASA Technical Reports Server (NTRS)

Atkins, K. L.; Sauer, C. G., Jr.; Kerrisk, D. J.

1973-01-01

This is a two-part report on solar electric propulsion (SEP) performance sensitivity analysis. The first part describes the preliminary analysis of the SEP thrust system performance for an Encke rendezvous mission. A detailed description of thrust subsystem hardware tolerances on mission performance is included together with nominal spacecraft parameters based on these tolerances. The second part describes the method of analysis and graphical techniques used in generating the data for Part 1. Included is a description of both the trajectory program used and the additional software developed for this analysis. Part 2 also includes a comprehensive description of the use of the graphical techniques employed in this performance analysis.

New Action of Inhibin Alpha Subunit in Advanced Prostate Cancer

DTIC Science & Technology

2010-02-01

official Department of the Army position, policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form...also used monoclonal R1 antibody to determine INHA expression in tumors. For detailed description of the methodology see Appendix 1. Positive...the LVD in the intratumoral regions with no difference in LVD in peritumoral and surrounding non -malignant regions of INHA- positive tumors compared

2016 Service Academy Gender Relations Survey: Overview Report

DTIC Science & Technology

2017-02-01

environment within the Academies. This Executive Summary will provide a summary of the methodology used and the top line results from the survey.1 Summary...discussion of the measurement constructs, a description of the survey methodology , and detailed presentation of the results. Each report section...are determined statistically significant at an alpha (α) level of .05.6 Survey Methodology Statistical Design OPA conducts cross-Service surveys that

NASA Marshall Space Flight Center Solar Observatory report, October - December 1990

NASA Technical Reports Server (NTRS)

Smith, James E.

1991-01-01

A description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility is provided, and a summary of its observations and data reduction during Oct. - Dec. 1990 is presented. The systems that make up the facility are a magnetograph telescope, and H-alpha telescope, a Questar telescope, and a computer code. The data are represented by longitudinal contours with azimuth plots.

NASA Marshall Space Flight Center solar observatory report, January - December 1987

NASA Technical Reports Server (NTRS)

Smith, James E.

1989-01-01

This report provides a description of the NASA Marshall Space Flight Center's Solar Vector Magnetograph Facility and gives a summary of its observations and data reduction during January to December 1987. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer code. The data are represented by longitudinal contours with azimuth plots.

NASA Marshall Space Flight Center Solar Observatory report, July - September 1990

NASA Technical Reports Server (NTRS)

Smith, James E.

1991-01-01

A description of the NASA Marshall Space Flight C nter's Solar Vector Magnetograph Facility is provided and gives a summary of its observations and data reduction during Jul. - Sep. 1990. The systems that make up the facility are a magnetograph telescope, an H-alpha telescope, a Questar telescope, and a computer code. The data are represented by longitudinal contours with azimuth plots.

NASA Marshall Space Flight Center solar observatory report, January to December 1989

NASA Technical Reports Server (NTRS)

Smith, James E.

1990-01-01

A description is provided of the NASA-Marshall's Solar Vector Magnetograph Facility and a summary of its observations and data reduction during January to December 1989 is given. The systems that make up the facility are a magnetograph telescope, and H-alpha telescope, a Questar telescope, and a computer code. The data are represented by longitudinal contours with azimuth plots.

Infrastructure for Rapid Development of Java GUI Programs

NASA Technical Reports Server (NTRS)

Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

2006-01-01

The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

ENCoRE: an efficient software for CRISPR screens identifies new players in extrinsic apoptosis.

PubMed

Trümbach, Dietrich; Pfeiffer, Susanne; Poppe, Manuel; Scherb, Hagen; Doll, Sebastian; Wurst, Wolfgang; Schick, Joel A

2017-11-25

As CRISPR/Cas9 mediated screens with pooled guide libraries in somatic cells become increasingly established, an unmet need for rapid and accurate companion informatics tools has emerged. We have developed a lightweight and efficient software to easily manipulate large raw next generation sequencing datasets derived from such screens into informative relational context with graphical support. The advantages of the software entitled ENCoRE (Easy NGS-to-Gene CRISPR REsults) include a simple graphical workflow, platform independence, local and fast multithreaded processing, data pre-processing and gene mapping with custom library import. We demonstrate the capabilities of ENCoRE to interrogate results from a pooled CRISPR cellular viability screen following Tumor Necrosis Factor-alpha challenge. The results not only identified stereotypical players in extrinsic apoptotic signaling but two as yet uncharacterized members of the extrinsic apoptotic cascade, Smg7 and Ces2a. We further validated and characterized cell lines containing mutations in these genes against a panel of cell death stimuli and involvement in p53 signaling. In summary, this software enables bench scientists with sensitive data or without access to informatic cores to rapidly interpret results from large scale experiments resulting from pooled CRISPR/Cas9 library screens.

Comparison of gene expression profiles between dental pulp and periodontal ligament tissues in humans

PubMed Central

Gong, Ai-Xiu; Zhang, Jing-Han; Li, Jing; Wu, Jun; Wang, Lin; Miao, Deng-Shun

2017-01-01

There are anatomical and functional differences between human dental pulp (DP) and periodontal ligament (PDL). However, the molecular biological differences and function of these tissues are poorly understood. In the present study, we employed a cDNA microarray array to screen for differentially expressed genes (DEGs) between human DP and PDL tissues, and used the online software WebGestalt to perform the functional analysis of the DEGs. In addition, the STRING database and KEGG pathway analysis were applied for interaction network and pathway analysis of the DEGs. DP and PDL samples were obtained from permanent premolars (n=16) extracted for orthodontic purposes. The results of the microarray assay were confirmed by RT-qPCR. The DEGs were found to be significantly associated with the extracellular matrix and focal adhesion. A total of 10 genes were selected to confirm the results. The mRNA levels of integrin alpha 4 (ITGA4), integrin alpha 8 (ITGA8), neurexin 1 (NRXN1) and contactin 1 (CNTN1) were significantly higher in the DP than in the PDL tissues. However, the levels of collagen type XI alpha 1 (COL11A1), aggrecan (ACAN), collagen type VI alpha 1 (COL6A1), chondroadherin (CHAD), laminin gamma 2 (LAMC2) and laminin alpha 3 (LAMA3) were higher in the PDL than in the DP samples. The gene expression profiles provide novel insight into the characterization of DP and PDL tissues, and contribute to our understanding of the potential molecular mechanisms of dental tissue mineralization and regeneration. PMID:28713908

Advanced Communications Technology Satellite high burst rate link evaluation terminal experiment control and monitor software maintenance manual, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC&M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC&M software from a technical perspective. An overview of the EC&M software, computer algorithms, format representation, and computer hardware configuration are included in the manual.

Recent developments in software for the Belle II aerogel RICH

NASA Astrophysics Data System (ADS)

Šantelj, L.; Adachi, I.; Dolenec, R.; Hataya, K.; Iori, S.; Iwata, S.; Kakuno, H.; Kataura, R.; Kawai, H.; Kindo, H.; Kobayashi, T.; Korpar, S.; Križan, P.; Kumita, T.; Mrvar, M.; Nishida, S.; Ogawa, K.; Ogawa, S.; Pestotnik, R.; Sumiyoshi, T.; Tabata, M.; Yonenaga, M.; Yusa, Y.

2017-12-01

For the Belle II spectrometer a proximity focusing RICH counter with an aerogel radiator (ARICH) will be employed as a PID system in the forward end-cap region of the spectrometer. The detector will provide about 4σ separation of pions and kaons up to momenta of 3.5 GeV/c, at the kinematic limits of the experiment. We present the up-to-date status of the ARICH simulation and reconstruction software, focusing on the recent improvements of the reconstruction algorithms and detector description in the Geant4 simulation. In addition, as a demonstration of detector readout software functionality we show the first cosmic ray Cherenkov rings observed in the ARICH.

NSF Policies on Software and Data Sharing and their Implementation

NASA Astrophysics Data System (ADS)

Katz, Daniel

2014-01-01

Since January 2011, the National Science Foundation has required a Data Management plan to be submitted with all proposals. This plan should include a description of how the proposers will share the products of the research (http://www.nsf.gov/bfa/dias/policy/dmp.jsp). What constitutes such data will be determined by the community of interest through the process of peer review and program management. This may include, but is not limited to: data, publications, samples, physical collections, software and models. In particular, “investigators and grantees are encouraged to share software and inventions created under an award or otherwise make them or their products widely available and usable.”

Antecedents of organizational citizenship behavior among Iranian nurses: a multicenter study.

PubMed

Taghinezhad, Fakhredin; Safavi, Mahboobe; Raiesifar, Afsaneh; Yahyavi, Sayed Hossein

2015-10-08

Organizational citizenship behavior (OCB) improves efficiency and employees' participation and generally provides a good ambiance. This study was conducted to determine the role of job satisfaction (JS), organizational commitment (OC) and procedural justice (PJ) in explaining OCB among nurses working in fifteen educational-treatment centers in Tehran-Iran, to provide guidelines for health care managers' further understanding of how to encourage citizenship behavior among nurses. In this multi-center descriptive-correlational study 373 nurses were evaluated through a Multi-stage cluster sampling method after obtaining approval from the Ethics Committee of Islamic Azad University, Tehran Medical Branch and Tehran University of Medical Sciences Research Deputy. Nurses who signed the informed consent and holding a bachelor or master degree, having a minimum one year of job experience and not having organizational management position during the questionnaire distribution were included in the study. In order to collect data, Demographic questionnaire, Podsakoff et al. (Leadersh Q 1(2):107-142, 1990) OCB questionnaire, OC questionnaire, Aelterman et al. (Educ Stud 33(3):285-297, 2007) JS questionnaire and PJ questionnaire were used. These questionnaires were translated into Persian and content validity was confirmed by an expert group; their reliability was calculated by the internal consistency Cronbach alpha coefficient and it was satisfied. Data were analyzed by descriptive statistics, Comparative mean tests, correlation coefficient and multiple-regression in the SPSS software version 11. The general mean and all five aspects of OCB that ranked higher than 3 were evaluated in a "quite desired" state. The mean for perceived procedural justice, the general mean for JS and the mean of general grade for OC from the nurses' was in "quite desired" state. Finding from multiple regression indicated that OC and PJ exhibit about 19 % of OCB variance totally which is statistically significant (P < 0.01). JS had no significant impact on explaining OCB. OC was the strongest predictor of nurses' OCB followed by perceived procedural justice. So, improving these factors can initiate better citizenship behavior among nurses.