Jet Fuel Exacerbated Noise-Induced Hearing Loss: Focus on Prediction of Central Auditory Processing Dysfunction

DTIC Science & Technology

2017-09-01

to develop a multi-scale model, together with relevant supporting experimental data, to describe jet fuel exacerbated noise induced hearing loss. In...scale model, together with relevant supporting experimental data, to describe jet fuel exacerbated noise-induced hearing loss. Such hearing loss...project was to develop a multi-scale model, together with relevant supporting experimental data, to describe jet fuel exacerbated NIHL. Herein we

SITE CHARACTERIZATION TO SUPPORT MODEL DEVELOPMENT FOR CONTAMINANTS IN GROUND WATER

EPA Science Inventory

The development of conceptual and predictive models is an important tool to guide site characterization in support of monitoring contaminants in ground water. The accuracy of predictive models is limited by the adequacy of the input data and the assumptions made to constrain mod...

A Model for Online Support in Classroom Management: Perceptions of Beginning Teachers

ERIC Educational Resources Information Center

Baker, Credence; Gentry, James; Larmer, William

2016-01-01

Classroom management is a challenge for beginning teachers. To address this challenge, a model to provide support for beginning teachers was developed, consisting of a one-day workshop on classroom management, followed with online support extending over eight weeks. Specific classroom management strategies included (a) developing a foundation…

Supportive accountability: a model for providing human support to enhance adherence to eHealth interventions.

PubMed

Mohr, David C; Cuijpers, Pim; Lehman, Kenneth

2011-03-10

The effectiveness of and adherence to eHealth interventions is enhanced by human support. However, human support has largely not been manualized and has usually not been guided by clear models. The objective of this paper is to develop a clear theoretical model, based on relevant empirical literature, that can guide research into human support components of eHealth interventions. A review of the literature revealed little relevant information from clinical sciences. Applicable literature was drawn primarily from organizational psychology, motivation theory, and computer-mediated communication (CMC) research. We have developed a model, referred to as "Supportive Accountability." We argue that human support increases adherence through accountability to a coach who is seen as trustworthy, benevolent, and having expertise. Accountability should involve clear, process-oriented expectations that the patient is involved in determining. Reciprocity in the relationship, through which the patient derives clear benefits, should be explicit. The effect of accountability may be moderated by patient motivation. The more intrinsically motivated patients are, the less support they likely require. The process of support is also mediated by the communications medium (eg, telephone, instant messaging, email). Different communications media each have their own potential benefits and disadvantages. We discuss the specific components of accountability, motivation, and CMC medium in detail. The proposed model is a first step toward understanding how human support enhances adherence to eHealth interventions. Each component of the proposed model is a testable hypothesis. As we develop viable human support models, these should be manualized to facilitate dissemination.

Knowledge into action - supporting the implementation of evidence into practice in Scotland.

PubMed

Davies, Sandra; Herbert, Paul; Wales, Ann; Ritchie, Karen; Wilson, Suzanne; Dobie, Laura; Thain, Annette

2017-03-01

The knowledge into action model for NHS Scotland provides a framework for librarians and health care staff to support getting evidence into practice. Central to this model is the development of a network of knowledge brokers to facilitate identification, use, creation and sharing of knowledge. To translate the concepts described in the model into tangible activities with the intention of supporting better use of evidence in health care and subsequently improving patient outcomes. Four areas of activity were addressed by small working groups comprising knowledge services staff in local and national boards. The areas of activity were as follows: defining existing and required capabilities and developing learning opportunities for the knowledge broker network; establishing national search and summarising services; developing actionable knowledge tools; and supporting person-to-person knowledge sharing. This work presents the development of practical tools and support to translate a conceptual model for getting knowledge into action into a series of activities and outputs to support better use of evidence in health care and subsequently improved patient outcomes. © 2017 Health Libraries Group.

Development of body weight support gait training system using antagonistic bi-articular muscle model.

PubMed

Shibata, Yoshiyuki; Imai, Shingo; Nobutomo, Tatsuya; Miyoshi, Tasuku; Yamamoto, Shin-Ichiroh

2010-01-01

The purpose of this study is to develop a body weight support gait training system for stroke and spinal cord injury. This system consists of a powered orthosis, treadmill and equipment of body weight support. Attachment of the powered orthosis is able to fit subject who has difference of body size. This powered orthosis is driven by pneumatic McKibben actuator. Actuators are arranged as pair of antagonistic bi-articular muscle model and two pairs of antagonistic mono-articular muscle model like human musculoskeletal system. Part of the equipment of body weight support suspend subject by wire harness, and body weight of subject is supported continuously by counter weight. The powered orthosis is attached equipment of body weight support by parallel linkage, and movement of the powered orthosis is limited at sagittal plane. Weight of the powered orthosis is compensated by parallel linkage with gas-spring. In this study, we developed system that has orthosis powered by pneumatic McKibben actuators and equipment of body weight support. We report detail of our developed body weight support gait training system.

XplOit: An Ontology-Based Data Integration Platform Supporting the Development of Predictive Models for Personalized Medicine.

PubMed

Weiler, Gabriele; Schwarz, Ulf; Rauch, Jochen; Rohm, Kerstin; Lehr, Thorsten; Theobald, Stefan; Kiefer, Stephan; Götz, Katharina; Och, Katharina; Pfeifer, Nico; Handl, Lisa; Smola, Sigrun; Ihle, Matthias; Turki, Amin T; Beelen, Dietrich W; Rissland, Jürgen; Bittenbring, Jörg; Graf, Norbert

2018-01-01

Predictive models can support physicians to tailor interventions and treatments to their individual patients based on their predicted response and risk of disease and help in this way to put personalized medicine into practice. In allogeneic stem cell transplantation risk assessment is to be enhanced in order to respond to emerging viral infections and transplantation reactions. However, to develop predictive models it is necessary to harmonize and integrate high amounts of heterogeneous medical data that is stored in different health information systems. Driven by the demand for predictive instruments in allogeneic stem cell transplantation we present in this paper an ontology-based platform that supports data owners and model developers to share and harmonize their data for model development respecting data privacy.

Supporting Collaborative Model and Data Service Development and Deployment with DevOps

NASA Astrophysics Data System (ADS)

David, O.

2016-12-01

Adopting DevOps practices for model service development and deployment enables a community to engage in service-oriented modeling and data management. The Cloud Services Integration Platform (CSIP) developed the last 5 years at Colorado State University provides for collaborative integration of environmental models into scalable model and data services as a micro-services platform with API and deployment infrastructure. Originally developed to support USDA natural resource applications, it proved suitable for a wider range of applications in the environmental modeling domain. While extending its scope and visibility it became apparent community integration and adequate work flow support through the full model development and application cycle drove successful outcomes.DevOps provide best practices, tools, and organizational structures to optimize the transition from model service development to deployment by minimizing the (i) operational burden and (ii) turnaround time for modelers. We have developed and implemented a methodology to fully automate a suite of applications for application lifecycle management, version control, continuous integration, container management, and container scaling to enable model and data service developers in various institutions to collaboratively build, run, deploy, test, and scale services within minutes.To date more than 160 model and data services are available for applications in hydrology (PRMS, Hydrotools, CFA, ESP), water and wind erosion prediction (WEPP, WEPS, RUSLE2), soil quality trends (SCI, STIR), water quality analysis (SWAT-CP, WQM, CFA, AgES-W), stream degradation assessment (SWAT-DEG), hydraulics (cross-section), and grazing management (GRAS). In addition, supporting data services include soil (SSURGO), ecological site (ESIS), climate (CLIGEN, WINDGEN), land management and crop rotations (LMOD), and pesticides (WQM), developed using this workflow automation and decentralized governance.

Software Tools For Building Decision-support Models For Flood Emergency Situations

NASA Astrophysics Data System (ADS)

Garrote, L.; Molina, M.; Ruiz, J. M.; Mosquera, J. C.

The SAIDA decision-support system was developed by the Spanish Ministry of the Environment to provide assistance to decision-makers during flood situations. SAIDA has been tentatively implemented in two test basins: Jucar and Guadalhorce, and the Ministry is currently planning to have it implemented in all major Spanish basins in a few years' time. During the development cycle of SAIDA, the need for providing as- sistance to end-users in model definition and calibration was clearly identified. System developers usually emphasise abstraction and generality with the goal of providing a versatile software environment. End users, on the other hand, require concretion and specificity to adapt the general model to their local basins. As decision-support models become more complex, the gap between model developers and users gets wider: Who takes care of model definition, calibration and validation?. Initially, model developers perform these tasks, but the scope is usually limited to a few small test basins. Before the model enters operational stage, end users must get involved in model construction and calibration, in order to gain confidence in the model recommendations. However, getting the users involved in these activities is a difficult task. The goal of this re- search is to develop representation techniques for simulation and management models in order to define, develop and validate a mechanism, supported by a software envi- ronment, oriented to provide assistance to the end-user in building decision models for the prediction and management of river floods in real time. The system is based on three main building blocks: A library of simulators of the physical system, an editor to assist the user in building simulation models, and a machine learning method to calibrate decision models based on the simulation models provided by the user.

DoD Product Line Practice Workshop Report

DTIC Science & Technology

1998-05-01

capability. The essential enterprise management practices include ensuring sound business goals providing an appropriate funding model performing...business. This way requires vision and explicit support at the organizational level. There must be an explicit funding model to support the development...the same group seems to work best in smaller organizations. A funding model for core asset development also needs to be developed because the core

School Innovation in Science: A Model for Supporting School and Teacher Development

ERIC Educational Resources Information Center

Tytler, Russell

2007-01-01

"School Innovation in Science" represents a model, developed through working with more than 200 Victorian schools, to improve science teaching and learning. SIS works at the level of the science team and the teacher, providing resources to challenge and support the change process. Its emphasis is on strategic planning supported by a…

The Resource Team: an innovative service delivery support model for mental health services.

PubMed

O'Sullivan, Julie; Powell, Jacinta; Gibbon, Peter; Emmerson, Brett

2009-04-01

This paper outlines the development of the Resource Team, an innovative service delivery model supporting clinical services at the Inner North Brisbane Mental Health Service, Royal Brisbane and Women's Hospital Health Service District. The team aims to provide a base for specialist mental health support staff, improve knowledge management and support the development of meaningful community partnerships. Development of the team included a literature review and consultation with internal and external stakeholders. From this, the objectives, roles and functions of the team were clarified and disseminated to stakeholders. The team currently encompasses 12 positions and has initiated a number of programs and service developments. These include improved IT management of clinical resources and the development of partnerships with the community and non-government sectors. The Resource Team effectively coordinates specialist clinical support positions, addresses knowledge management issues and facilitates meaningful engagement with the community and non-government sectors. The model could easily be applied in other mental health and general health services.

Computational modeling of the amphibian thyroid axis supported by targeted in vivo testing to advance quantitative adverse outcome pathway development

EPA Science Inventory

In vitro screening of chemicals for bioactivity together with computational modeling are beginning to replace animal toxicity testing in support of chemical risk assessment. To facilitate this transition, an amphibian thyroid axis model has been developed to describe thyroid home...

A simulation study to quantify the impacts of exposure ...

EPA Pesticide Factsheets

A simulation study to quantify the impacts of exposure measurement error on air pollution health risk estimates in copollutant time-series models The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

Roles of University Support for International Students in the United States: Analysis of a Systematic Model of University Identification, University Support, and Psychological Well-Being

ERIC Educational Resources Information Center

Cho, Jaehee; Yu, Hongsik

2015-01-01

Unlike previous research on international students' social support, this current study applied the concept of organizational support to university contexts, examining the effects of university support. Mainly based on the social identity/self-categorization stress model, this study developed and tested a path model composed of four key…

EpiK: A Knowledge Base for Epidemiological Modeling and Analytics of Infectious Diseases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasan, S. M. Shamimul; Fox, Edward A.; Bisset, Keith

Computational epidemiology seeks to develop computational methods to study the distribution and determinants of health-related states or events (including disease), and the application of this study to the control of diseases and other health problems. Recent advances in computing and data sciences have led to the development of innovative modeling environments to support this important goal. The datasets used to drive the dynamic models as well as the data produced by these models presents unique challenges owing to their size, heterogeneity and diversity. These datasets form the basis of effective and easy to use decision support and analytical environments. Asmore » a result, it is important to develop scalable data management systems to store, manage and integrate these datasets. In this paper, we develop EpiK—a knowledge base that facilitates the development of decision support and analytical environments to support epidemic science. An important goal is to develop a framework that links the input as well as output datasets to facilitate effective spatio-temporal and social reasoning that is critical in planning and intervention analysis before and during an epidemic. The data management framework links modeling workflow data and its metadata using a controlled vocabulary. The metadata captures information about storage, the mapping between the linked model and the physical layout, and relationships to support services. EpiK is designed to support agent-based modeling and analytics frameworks—aggregate models can be seen as special cases and are thus supported. We use semantic web technologies to create a representation of the datasets that encapsulates both the location and the schema heterogeneity. The choice of RDF as a representation language is motivated by the diversity and growth of the datasets that need to be integrated. A query bank is developed—the queries capture a broad range of questions that can be posed and answered during a typical case study pertaining to disease outbreaks. The queries are constructed using SPARQL Protocol and RDF Query Language (SPARQL) over the EpiK. EpiK can hide schema and location heterogeneity while efficiently supporting queries that span the computational epidemiology modeling pipeline: from model construction to simulation output. As a result, we show that the performance of benchmark queries varies significantly with respect to the choice of hardware underlying the database and resource description framework (RDF) engine.« less

EpiK: A Knowledge Base for Epidemiological Modeling and Analytics of Infectious Diseases

DOE PAGES

Hasan, S. M. Shamimul; Fox, Edward A.; Bisset, Keith; ...

2017-11-06

Computational epidemiology seeks to develop computational methods to study the distribution and determinants of health-related states or events (including disease), and the application of this study to the control of diseases and other health problems. Recent advances in computing and data sciences have led to the development of innovative modeling environments to support this important goal. The datasets used to drive the dynamic models as well as the data produced by these models presents unique challenges owing to their size, heterogeneity and diversity. These datasets form the basis of effective and easy to use decision support and analytical environments. Asmore » a result, it is important to develop scalable data management systems to store, manage and integrate these datasets. In this paper, we develop EpiK—a knowledge base that facilitates the development of decision support and analytical environments to support epidemic science. An important goal is to develop a framework that links the input as well as output datasets to facilitate effective spatio-temporal and social reasoning that is critical in planning and intervention analysis before and during an epidemic. The data management framework links modeling workflow data and its metadata using a controlled vocabulary. The metadata captures information about storage, the mapping between the linked model and the physical layout, and relationships to support services. EpiK is designed to support agent-based modeling and analytics frameworks—aggregate models can be seen as special cases and are thus supported. We use semantic web technologies to create a representation of the datasets that encapsulates both the location and the schema heterogeneity. The choice of RDF as a representation language is motivated by the diversity and growth of the datasets that need to be integrated. A query bank is developed—the queries capture a broad range of questions that can be posed and answered during a typical case study pertaining to disease outbreaks. The queries are constructed using SPARQL Protocol and RDF Query Language (SPARQL) over the EpiK. EpiK can hide schema and location heterogeneity while efficiently supporting queries that span the computational epidemiology modeling pipeline: from model construction to simulation output. As a result, we show that the performance of benchmark queries varies significantly with respect to the choice of hardware underlying the database and resource description framework (RDF) engine.« less

Nuclear Engine System Simulation (NESS) version 2.0

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-01-01

The topics are presented in viewgraph form and include the following; nuclear thermal propulsion (NTP) engine system analysis program development; nuclear thermal propulsion engine analysis capability requirements; team resources used to support NESS development; expanded liquid engine simulations (ELES) computer model; ELES verification examples; NESS program development evolution; past NTP ELES analysis code modifications and verifications; general NTP engine system features modeled by NESS; representative NTP expander, gas generator, and bleed engine system cycles modeled by NESS; NESS program overview; NESS program flow logic; enabler (NERVA type) nuclear thermal rocket engine; prismatic fuel elements and supports; reactor fuel and support element parameters; reactor parameters as a function of thrust level; internal shield sizing; and reactor thermal model.

SMI Compatible Simulation Scheduler Design for Reuse of Model Complying with Smp Standard

NASA Astrophysics Data System (ADS)

Koo, Cheol-Hea; Lee, Hoon-Hee; Cheon, Yee-Jin

2010-12-01

Software reusability is one of key factors which impacts cost and schedule on a software development project. It is very crucial also in satellite simulator development since there are many commercial simulator models related to satellite and dynamics. If these models can be used in another simulator platform, great deal of confidence and cost/schedule reduction would be achieved. Simulation model portability (SMP) is maintained by European Space Agency and many models compatible with SMP/simulation model interface (SMI) are available. Korea Aerospace Research Institute (KARI) is developing hardware abstraction layer (HAL) supported satellite simulator to verify on-board software of satellite. From above reasons, KARI wants to port these SMI compatible models to the HAL supported satellite simulator. To port these SMI compatible models to the HAL supported satellite simulator, simulation scheduler is preliminary designed according to the SMI standard.

Analysis of methods. [information systems evolution environment

NASA Technical Reports Server (NTRS)

Mayer, Richard J. (Editor); Ackley, Keith A.; Wells, M. Sue; Mayer, Paula S. D.; Blinn, Thomas M.; Decker, Louis P.; Toland, Joel A.; Crump, J. Wesley; Menzel, Christopher P.; Bodenmiller, Charles A.

1991-01-01

Information is one of an organization's most important assets. For this reason the development and maintenance of an integrated information system environment is one of the most important functions within a large organization. The Integrated Information Systems Evolution Environment (IISEE) project has as one of its primary goals a computerized solution to the difficulties involved in the development of integrated information systems. To develop such an environment a thorough understanding of the enterprise's information needs and requirements is of paramount importance. This document is the current release of the research performed by the Integrated Development Support Environment (IDSE) Research Team in support of the IISEE project. Research indicates that an integral part of any information system environment would be multiple modeling methods to support the management of the organization's information. Automated tool support for these methods is necessary to facilitate their use in an integrated environment. An integrated environment makes it necessary to maintain an integrated database which contains the different kinds of models developed under the various methodologies. In addition, to speed the process of development of models, a procedure or technique is needed to allow automatic translation from one methodology's representation to another while maintaining the integrity of both. The purpose for the analysis of the modeling methods included in this document is to examine these methods with the goal being to include them in an integrated development support environment. To accomplish this and to develop a method for allowing intra-methodology and inter-methodology model element reuse, a thorough understanding of multiple modeling methodologies is necessary. Currently the IDSE Research Team is investigating the family of Integrated Computer Aided Manufacturing (ICAM) DEFinition (IDEF) languages IDEF(0), IDEF(1), and IDEF(1x), as well as ENALIM, Entity Relationship, Data Flow Diagrams, and Structure Charts, for inclusion in an integrated development support environment.

Modeling to Support the Development of Habitat Targets for Piping Plovers on the Missouri River

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buenau, Kate E.

2015-05-05

Report on modeling and analyses done in support of developing quantative sandbar habitat targets for piping plovers, including assessment of reference, historical, dams present but not operated, and habitat construction calibrated to meet population viability targets.

EPA MODELING TOOLS FOR CAPTURE ZONE DELINEATION

EPA Science Inventory

The EPA Office of Research and Development supports a step-wise modeling approach for design of wellhead protection areas for water supply wells. A web-based WellHEDSS (wellhead decision support system) is under development for determining when simple capture zones (e.g., centri...

Early Childhood Teachers' Professional Learning in Early Algebraic Thinking: A Model that Supports New Knowledge and Pedagogy

ERIC Educational Resources Information Center

Warren, Elizabeth

2009-01-01

The implementation of a new mathematics syllabus in the elementary context is problematic, especially if it contains a new content area. A professional development model, Transformative Teaching in the Early Years Mathematics (TTEYM) was specifically developed to support the implementation of the new Patterns and Algebra strand. The model was…

Supporting the Development of Conceptions of Statistics by Engaging Students in Measuring and Modeling Variability

ERIC Educational Resources Information Center

Lehrer, Richard; Kim, Min-joung; Schauble, Leona

2007-01-01

New capabilities in "TinkerPlots 2.0" supported the conceptual development of fifth- and sixth-grade students as they pursued several weeks of instruction that emphasized data modeling. The instruction highlighted links between data analysis, chance, and modeling in the context of describing and explaining the distributions of measures that result…

Life cycle cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1993-01-01

This paper documents progress to date by the University of Dayton on the development of a life cycle cost model for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of a life cycle cost model. Cost categories are initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. The focus will be on operations and maintenance costs and other recurring costs. Secondary tasks performed concurrent with the development of the life cycle costing model include continual support and upgrade of the R&M model. The primary result of the completed research will be a methodology and a computer implementation of the methodology to provide for timely cost analysis in support of the conceptual design activities. The major objectives of this research are: to obtain and to develop improved methods for estimating manpower, spares, software and hardware costs, facilities costs, and other cost categories as identified by NASA personnel; to construct a life cycle cost model of a space transportation system for budget exercises and performance-cost trade-off analysis during the conceptual and development stages; to continue to support modifications and enhancements to the R&M model; and to continue to assist in the development of a simulation model to provide an integrated view of the operations and support of the proposed system.

The role of geomatics in supporting sustainable development policy-making

NASA Astrophysics Data System (ADS)

Zhang, Aining

Sustainable development has been on national policy agendas since 1992 when Agenda 21, an international agreement on sustainable development, was signed by over 150 countries. A key to sustainable development policy-making is information. Spatial information is an integral part of this information pool given the spatial nature of sustainable development. Geomatics, a technology dealing specifically with spatial information, can play a major role in support of the policy-making process. This thesis is aimed at advancing this role. The thesis starts with a discussion of theories and methodologies for sustainable development. The policy process for sustainable development is characterized, followed by an analysis of the requirements of sustainable development policy-making for geomatics support. The current status of geomatics in meeting these requirements is then examined, and the challenges and potential for geomatics to further address the needs are identified. To deal with these challenges, an integrated solution, namely the development of an on-line national policy atlas for sustainable development, is proposed, with a focus to support policy action formulation. The thesis further addresses one of the major research topics required for the implementation of the proposed solution, namely the exploration of the feasibility of a spatial statistics approach to predictive modelling in support of policy scenario assessments. The study is based on the case of national climate change policy formulation, with a focus on the development of new light duty vehicle sales mix models in support of transportation fuel efficiency policy-making aimed at greenhouse gas reductions. The conceptual framework and methodology for the case study are followed by the presentation of outcomes including models and policy scenario forecasts. The case study has illustrated that a spatial statistics approach is not only feasible for the development of predictive models in support of policy-making, but also provides several unique advantages that could potentially improve sustainable development policymaking.

A comparison of three approaches for simulating fine-scale surface winds in support of wildland fire management: Part I. Model formulation and comparison against measurements

Treesearch

Jason M. Forthofer; Bret W. Butler; Natalie S. Wagenbrenner

2014-01-01

For this study three types of wind models have been defined for simulating surface wind flow in support of wildland fire management: (1) a uniform wind field (typically acquired from coarse-resolution (,4 km) weather service forecast models); (2) a newly developed mass-conserving model and (3) a newly developed mass and momentumconserving model (referred to as the...

Distributed support modelling for vertical track dynamic analysis

NASA Astrophysics Data System (ADS)

Blanco, B.; Alonso, A.; Kari, L.; Gil-Negrete, N.; Giménez, J. G.

2018-04-01

The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the 'pinned-pinned' vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.

Use of a design challenge to develop postural support devices for intermediate wheelchair users

PubMed Central

Tanuku, Deepti; Moller, Nathaniel C.

2017-01-01

The provision of an appropriate wheelchair, one that provides proper fit and postural support, promotes wheelchair users’ physical health and quality of life. Many wheelchair users have postural difficulties, requiring supplemental postural support devices for added trunk support. However, in many low- and middle-income settings, postural support devices are inaccessible, inappropriate or unaffordable. This article describes the use of the design challenge model, informed by a design thinking approach, to catalyse the development of an affordable, simple and robust postural support device for low- and middle-income countries. The article also illustrates how not-for-profit organisations can utilise design thinking and, in particular, the design challenge model to successfully support the development of innovative solutions to product or process challenges. PMID:28936418

AAL service development loom--from the idea to a marketable business model.

PubMed

Kriegel, Johannes; Auinger, Klemens

2015-01-01

The Ambient Assisted Living (AAL) market is still in an early stage of development. Previous approaches of comprehensive AAL services are mostly supply-side driven and focused on hardware and software. Usually this type of AAL solutions does not lead to a sustainable success on the market. Research and development increasingly focuses on demand and customer requirements in addition to the social and legal framework. The question is: How can a systematic performance measurement strategy along a service development process support the market-ready design of a concrete business model for AAL service? Within the EU funded research project DALIA (Assistant for Daily Life Activities at Home) an iterative service development process uses an adapted Osterwalder business model canvas. The application of a performance measurement index (PMI) to support the process has been developed and tested. Development of an iterative service development model using a supporting PMI. The PMI framework is developed throughout the engineering of a virtual assistant (AVATAR) as a modular interface to connect informal carers with necessary and useful services. Future research should seek to ensure that the PMI enables meaningful transparency regarding targeting (e.g. innovative AAL service), design (e.g. functional hybrid AAL service) and implementation (e.g. marketable AAL support services). To this end, a further reference to further testing practices is required. The aim must be to develop a weighted PMI in the context of further research, which supports both the service engineering and the subsequent service management process.

A model for the electronic support of practice-based research networks.

PubMed

Peterson, Kevin A; Delaney, Brendan C; Arvanitis, Theodoros N; Taweel, Adel; Sandberg, Elisabeth A; Speedie, Stuart; Richard Hobbs, F D

2012-01-01

The principal goal of the electronic Primary Care Research Network (ePCRN) is to enable the development of an electronic infrastructure to support clinical research activities in primary care practice-based research networks (PBRNs). We describe the model that the ePCRN developed to enhance the growth and to expand the reach of PBRN research. Use cases and activity diagrams were developed from interviews with key informants from 11 PBRNs from the United States and United Kingdom. Discrete functions were identified and aggregated into logical components. Interaction diagrams were created, and an overall composite diagram was constructed describing the proposed software behavior. Software for each component was written and aggregated, and the resulting prototype application was pilot tested for feasibility. A practical model was then created by separating application activities into distinct software packages based on existing PBRN business rules, hardware requirements, network requirements, and security concerns. We present an information architecture that provides for essential interactions, activities, data flows, and structural elements necessary for providing support for PBRN translational research activities. The model describes research information exchange between investigators and clusters of independent data sites supported by a contracted research director. The model was designed to support recruitment for clinical trials, collection of aggregated anonymous data, and retrieval of identifiable data from previously consented patients across hundreds of practices. The proposed model advances our understanding of the fundamental roles and activities of PBRNs and defines the information exchange commonly used by PBRNs to successfully engage community health care clinicians in translational research activities. By describing the network architecture in a language familiar to that used by software developers, the model provides an important foundation for the development of electronic support for essential PBRN research activities.

Using Work Action Analysis to Identify Web-Portal Requirements for a Professional Development Program

ERIC Educational Resources Information Center

Nickles, George

2007-01-01

This article describes using Work Action Analysis (WAA) as a method for identifying requirements for a web-based portal that supports a professional development program. WAA is a cognitive systems engineering method for modeling multi-agent systems to support design and evaluation. A WAA model of the professional development program of the…

Cost Benefit Analysis Modeling Tool for Electric vs. ICE Airport Ground Support Equipment – Development and Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Francfort; Kevin Morrow; Dimitri Hochard

2007-02-01

This report documents efforts to develop a computer tool for modeling the economic payback for comparative airport ground support equipment (GSE) that are propelled by either electric motors or gasoline and diesel engines. The types of GSE modeled are pushback tractors, baggage tractors, and belt loaders. The GSE modeling tool includes an emissions module that estimates the amount of tailpipe emissions saved by replacing internal combustion engine GSE with electric GSE. This report contains modeling assumptions, methodology, a user’s manual, and modeling results. The model was developed based on the operations of two airlines at four United States airports.

What Works? Toward a New Classification System for Mental Health Supported Accommodation Services: The Simple Taxonomy for Supported Accommodation (STAX-SA)

PubMed Central

McPherson, Peter; Krotofil, Joanna

2018-01-01

Inconsistent terminology and variation in service models have made synthesis of the supported accommodation literature challenging. To overcome this, we developed a brief, categorical taxonomy that aimed to capture the defining features of different supported accommodation models: the simple taxonomy for supported accommodation (STAX-SA). Data from a previous review of existing classification systems were used to develop the taxonomy structure. After initial testing and amendments, the STAX-SA and an existing taxonomy were applied to 132 supported accommodation service descriptions drawn from two systematic reviews and their performance compared. To assess external validity, the STAX-SA was distributed to a sample of supported accommodation managers in England and they were asked to use it to classify their services. The final version of the STAX-SA comprised of five supported accommodation ‘types’, based on four domains; Staffing location; Level of support; Emphasis on move-on; and Physical setting. The STAX-SA accurately categorized 71.1% (n = 94) of service descriptions, outperforming the comparison tool, and was not affected by publication date or research design. The STAX-SA effectively discriminated between ‘real world’ service models in England and 53.2% (n = 17) of service managers indicated that the taxonomy was ‘Very effective’ or ‘Extremely effective’ in capturing key characteristics of their service. The STAX-SA is an effective tool for classifying supported accommodation models and represents a promising approach to synthesizing the extant effectiveness literature. The authors recommend the development of reporting guidelines for future supported accommodation publications to facilitate comparison between models. PMID:29364171

What Works? Toward a New Classification System for Mental Health Supported Accommodation Services: The Simple Taxonomy for Supported Accommodation (STAX-SA).

PubMed

McPherson, Peter; Krotofil, Joanna; Killaspy, Helen

2018-01-24

Inconsistent terminology and variation in service models have made synthesis of the supported accommodation literature challenging. To overcome this, we developed a brief, categorical taxonomy that aimed to capture the defining features of different supported accommodation models: the simple taxonomy for supported accommodation (STAX-SA). Data from a previous review of existing classification systems were used to develop the taxonomy structure. After initial testing and amendments, the STAX-SA and an existing taxonomy were applied to 132 supported accommodation service descriptions drawn from two systematic reviews and their performance compared. To assess external validity, the STAX-SA was distributed to a sample of supported accommodation managers in England and they were asked to use it to classify their services. The final version of the STAX-SA comprised of five supported accommodation 'types', based on four domains; Staffing location ; Level of support ; Emphasis on move-on ; and Physical setting . The STAX-SA accurately categorized 71.1% ( n = 94) of service descriptions, outperforming the comparison tool, and was not affected by publication date or research design. The STAX-SA effectively discriminated between 'real world' service models in England and 53.2% ( n = 17) of service managers indicated that the taxonomy was ' Very effective ' or ' Extremely effective ' in capturing key characteristics of their service. The STAX-SA is an effective tool for classifying supported accommodation models and represents a promising approach to synthesizing the extant effectiveness literature. The authors recommend the development of reporting guidelines for future supported accommodation publications to facilitate comparison between models.

Operations and support cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1994-01-01

The University of Dayton is pleased to submit this annual report to the National Aeronautics and Space Administration (NASA) Langley Research Center which documents the development of an operations and support (O&S) cost model as part of a larger life cycle cost (LCC) structure. It is intended for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of an operations and support life cycle cost model. Cost categories were initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. A revised cost element structure (CES), which is currently under study by NASA, was used to established the basic cost elements used in the model. While the focus of the effort was on operations and maintenance costs and other recurring costs, the computerized model allowed for other cost categories such as RDT&E and production costs to be addressed. Secondary tasks performed concurrent with the development of the costing model included support and upgrades to the reliability and maintainability (R&M) model. The primary result of the current research has been a methodology and a computer implementation of the methodology to provide for timely operations and support cost analysis during the conceptual design activities.

Ascertaining Validity in the Abstract Realm of PMESII Simulation Models: An Analysis of the Peace Support Operations Model (PSOM)

DTIC Science & Technology

2009-06-01

simulation is the campaign-level Peace Support Operations Model (PSOM). This thesis provides a quantitative analysis of PSOM. The results are based ...multiple potential outcomes , further development and analysis is required before the model is used for large scale analysis . 15. NUMBER OF PAGES 159...multiple potential outcomes , further development and analysis is required before the model is used for large scale analysis . vi THIS PAGE

Implementing partnership-driven clinical federated electronic health record data sharing networks.

PubMed

Stephens, Kari A; Anderson, Nicholas; Lin, Ching-Ping; Estiri, Hossein

2016-09-01

Building federated data sharing architectures requires supporting a range of data owners, effective and validated semantic alignment between data resources, and consistent focus on end-users. Establishing these resources requires development methodologies that support internal validation of data extraction and translation processes, sustaining meaningful partnerships, and delivering clear and measurable system utility. We describe findings from two federated data sharing case examples that detail critical factors, shared outcomes, and production environment results. Two federated data sharing pilot architectures developed to support network-based research associated with the University of Washington's Institute of Translational Health Sciences provided the basis for the findings. A spiral model for implementation and evaluation was used to structure iterations of development and support knowledge share between the two network development teams, which cross collaborated to support and manage common stages. We found that using a spiral model of software development and multiple cycles of iteration was effective in achieving early network design goals. Both networks required time and resource intensive efforts to establish a trusted environment to create the data sharing architectures. Both networks were challenged by the need for adaptive use cases to define and test utility. An iterative cyclical model of development provided a process for developing trust with data partners and refining the design, and supported measureable success in the development of new federated data sharing architectures. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

ERD WATERSHED AND WATER QUALITY MODEL DEVELOPMENT AND TECHNICAL SUPPORT PROGRAM

EPA Science Inventory

The ERD has a long history in providing model research and development and technical support to Regions, States and the Office of Water for watersheds/water quality ecosystem research. The ERD efforts are described in major subtasks comprising the Program. Briefly, these are:

The Reading Connection: Literacy Development and Homeless Children.

ERIC Educational Resources Information Center

Hanning, Eileen

1996-01-01

Describes a model of intervention that is designed to support and encourage literacy development among children whose families are or recently have been homeless. The article then places this model within a global context, discussing the broader implications of providing literacy support services for homeless families. (GR)

Influence of Back-Up Bearings and Support Structure Dynamics on the Behavior of Rotors With Active Supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1996-01-01

This report presents a synopsis of the research work. Specific accomplishments are itemized below: (1) Experimental facilities have been developed. This includes a magnetic bearing test rig and an auxiliary bearing test rig. In addition, components have been designed, constructed, and tested for use with a rotordynamics test rig located at NASA Lewis Research Center. (2) A study of the rotordynamics of an auxiliary bearing supported T-501 engine model was performed. (3) An experimental/simulation study of auxiliary bearing rotordynamics has been performed. (4) A rotordynamical model for a magnetic bearing supported rotor system, including auxiliary bearing effects has been developed and simulation studies performed.(5) A finite element model for a foil bearing has been developed and studies of a rotor supported by foil bearings have been performed. (6) Two students affiliated with this project have graduated with M.S. degrees.

The Effects of the Coordination Support on Shared Mental Models and Coordinated Action

ERIC Educational Resources Information Center

Kim, Hyunsong; Kim, Dongsik

2008-01-01

The purpose of this study was to examine the effects of coordination support (tool support and tutor support) on the development of shared mental models (SMMs) and coordinated action in a computer-supported collaborative learning environment. Eighteen students were randomly assigned to one of three conditions, including the tool condition, the…

The impact of a professional development model for a mobilized science curriculum: a case study of teacher changes

NASA Astrophysics Data System (ADS)

Looi, Chee-Kit; Sun, Daner; Kim, Mi Song; Wen, Yun

2018-01-01

Background and purpose: To date, there has been little research on the Teacher Professional Development (TPD) for delivering a mobile technology-supported science curriculum. To address this, a TPD model for a science curriculum supported by mobile technology was developed and evaluated in this paper. The study reported focuses on the establishment of the TPD model and exploration of its impact on teacher behaviors in the curriculum implementation.

CSDMS2.0: Computational Infrastructure for Community Surface Dynamics Modeling

NASA Astrophysics Data System (ADS)

Syvitski, J. P.; Hutton, E.; Peckham, S. D.; Overeem, I.; Kettner, A.

2012-12-01

The Community Surface Dynamic Modeling System (CSDMS) is an NSF-supported, international and community-driven program that seeks to transform the science and practice of earth-surface dynamics modeling. CSDMS integrates a diverse community of more than 850 geoscientists representing 360 international institutions (academic, government, industry) from 60 countries and is supported by a CSDMS Interagency Committee (22 Federal agencies), and a CSDMS Industrial Consortia (18 companies). CSDMS presently distributes more 200 Open Source models and modeling tools, access to high performance computing clusters in support of developing and running models, and a suite of products for education and knowledge transfer. CSDMS software architecture employs frameworks and services that convert stand-alone models into flexible "plug-and-play" components to be assembled into larger applications. CSDMS2.0 will support model applications within a web browser, on a wider variety of computational platforms, and on other high performance computing clusters to ensure robustness and sustainability of the framework. Conversion of stand-alone models into "plug-and-play" components will employ automated wrapping tools. Methods for quantifying model uncertainty are being adapted as part of the modeling framework. Benchmarking data is being incorporated into the CSDMS modeling framework to support model inter-comparison. Finally, a robust mechanism for ingesting and utilizing semantic mediation databases is being developed within the Modeling Framework. Six new community initiatives are being pursued: 1) an earth - ecosystem modeling initiative to capture ecosystem dynamics and ensuing interactions with landscapes, 2) a geodynamics initiative to investigate the interplay among climate, geomorphology, and tectonic processes, 3) an Anthropocene modeling initiative, to incorporate mechanistic models of human influences, 4) a coastal vulnerability modeling initiative, with emphasis on deltas and their multiple threats and stressors, 5) a continental margin modeling initiative, to capture extreme oceanic and atmospheric events generating turbidity currents in the Gulf of Mexico, and 6) a CZO Focus Research Group, to develop compatibility between CSDMS architecture and protocols and Critical Zone Observatory-developed models and data.

The 12-foot pressure wind tunnel restoration project model support systems

NASA Technical Reports Server (NTRS)

Sasaki, Glen E.

1992-01-01

The 12 Foot Pressure Wind Tunnel is a variable density, low turbulence wind tunnel that operates at subsonic speeds, and up to six atmospheres total pressure. The restoration of this facility is of critical importance to the future of the U.S. aerospace industry. As part of this project, several state of the art model support systems are furnished to provide an optimal balance between aerodynamic and operational efficiency parameters. Two model support systems, the Rear Strut Model Support, and the High Angle of Attack Model Support are discussed. This paper covers design parameters, constraints, development, description, and component selection.

Space Life Support Engineering Program

NASA Technical Reports Server (NTRS)

Seagrave, Richard C.

1993-01-01

This report covers the second year of research relating to the development of closed-loop long-term life support systems. Emphasis was directed toward concentrating on the development of dynamic simulation techniques and software and on performing a thermodynamic systems analysis in an effort to begin optimizing the system needed for water purification. Four appendices are attached. The first covers the ASPEN modeling of the closed loop Environmental Control Life Support System (ECLSS) and its thermodynamic analysis. The second is a report on the dynamic model development for water regulation in humans. The third regards the development of an interactive computer-based model for determining exercise limitations. The fourth attachment is an estimate of the second law thermodynamic efficiency of the various units comprising an ECLSS.

A prototype computer-aided modelling tool for life-support system models

NASA Technical Reports Server (NTRS)

Preisig, H. A.; Lee, Tae-Yeong; Little, Frank

1990-01-01

Based on the canonical decomposition of physical-chemical-biological systems, a prototype kernel has been developed to efficiently model alternative life-support systems. It supports (1) the work in an interdisciplinary group through an easy-to-use mostly graphical interface, (2) modularized object-oriented model representation, (3) reuse of models, (4) inheritance of structures from model object to model object, and (5) model data base. The kernel is implemented in Modula-II and presently operates on an IBM PC.

The Impact of a Professional Development Model for a Mobilized Science Curriculum: A Case Study of Teacher Changes

ERIC Educational Resources Information Center

Looi, Chee-Kit; Sun, Daner; Kim, Mi Song; Wen, Yun

2018-01-01

Background and purpose: To date, there has been little research on the Teacher Professional Development (TPD) for delivering a mobile technology-supported science curriculum. To address this, a TPD model for a science curriculum supported by mobile technology was developed and evaluated in this paper. The study reported focuses on the…

Model-Driven Useware Engineering

NASA Astrophysics Data System (ADS)

Meixner, Gerrit; Seissler, Marc; Breiner, Kai

User-oriented hardware and software development relies on a systematic development process based on a comprehensive analysis focusing on the users' requirements and preferences. Such a development process calls for the integration of numerous disciplines, from psychology and ergonomics to computer sciences and mechanical engineering. Hence, a correspondingly interdisciplinary team must be equipped with suitable software tools to allow it to handle the complexity of a multimodal and multi-device user interface development approach. An abstract, model-based development approach seems to be adequate for handling this complexity. This approach comprises different levels of abstraction requiring adequate tool support. Thus, in this chapter, we present the current state of our model-based software tool chain. We introduce the use model as the core model of our model-based process, transformation processes, and a model-based architecture, and we present different software tools that provide support for creating and maintaining the models or performing the necessary model transformations.

Using Web-Based Knowledge Extraction Techniques to Support Cultural Modeling

NASA Astrophysics Data System (ADS)

Smart, Paul R.; Sieck, Winston R.; Shadbolt, Nigel R.

The World Wide Web is a potentially valuable source of information about the cognitive characteristics of cultural groups. However, attempts to use the Web in the context of cultural modeling activities are hampered by the large-scale nature of the Web and the current dominance of natural language formats. In this paper, we outline an approach to support the exploitation of the Web for cultural modeling activities. The approach begins with the development of qualitative cultural models (which describe the beliefs, concepts and values of cultural groups), and these models are subsequently used to develop an ontology-based information extraction capability. Our approach represents an attempt to combine conventional approaches to information extraction with epidemiological perspectives of culture and network-based approaches to cultural analysis. The approach can be used, we suggest, to support the development of models providing a better understanding of the cognitive characteristics of particular cultural groups.

Data access and decision tools for coastal water resources management

EPA Science Inventory

US EPA has supported the development of numerous models and tools to support implementation of environmental regulations. However, transfer of knowledge and methods from detailed technical models to support practical problem solving by local communities and watershed or coastal ...

Remote Sensing Technologies and Geospatial Modelling Hierarchy for Smart City Support

NASA Astrophysics Data System (ADS)

Popov, M.; Fedorovsky, O.; Stankevich, S.; Filipovich, V.; Khyzhniak, A.; Piestova, I.; Lubskyi, M.; Svideniuk, M.

2017-12-01

The approach to implementing the remote sensing technologies and geospatial modelling for smart city support is presented. The hierarchical structure and basic components of the smart city information support subsystem are considered. Some of the already available useful practical developments are described. These include city land use planning, urban vegetation analysis, thermal condition forecasting, geohazard detection, flooding risk assessment. Remote sensing data fusion approach for comprehensive geospatial analysis is discussed. Long-term city development forecasting by Forrester - Graham system dynamics model is provided over Kiev urban area.

Data access and decision tools for coastal water resources ...

EPA Pesticide Factsheets

US EPA has supported the development of numerous models and tools to support implementation of environmental regulations. However, transfer of knowledge and methods from detailed technical models to support practical problem solving by local communities and watershed or coastal management organizations remains a challenge. We have developed the Estuary Data Mapper (EDM) to facilitate data discovery, visualization and access to support environmental problem solving for coastal watersheds and estuaries. EDM is a stand-alone application based on open-source software which requires only internet access for operation. Initially, development of EDM focused on delivery of raw data streams from distributed web services, ranging from atmospheric deposition to hydrologic, tidal, and water quality time series, estuarine habitat characteristics, and remote sensing products. We have transitioned to include access to value-added products which provide end-users with results of future scenario analysis, facilitate extension of models across geographic regions, and/or promote model interoperability. Here we present three examples: 1) the delivery of input data for the development of seagrass models across estuaries, 2) scenarios illustrating the implications of riparian buffer management (loss or restoration) for stream thermal regimes and fish communities, and 3) access to hydrology model outputs to foster connections across models at different scales, ultimately feeding

Models of Human Information Requirements: "When Reasonable Aiding Systems Disagree"

NASA Technical Reports Server (NTRS)

Corker, Kevin; Pisanich, Gregory; Shafto, Michael (Technical Monitor)

1994-01-01

Aircraft flight management and Air Traffic Control (ATC) automation are under development to maximize the economy of flight and to increase the capacity of the terminal area airspace while maintaining levels of flight safety equal to or better than current system performance. These goals are being realized by the introduction of flight management automation aiding and operations support systems on the flight deck and by new developments of ATC aiding systems that seek to optimize scheduling of aircraft while potentially reducing required separation and accounting for weather and wake vortex turbulence. Aiding systems on both the flight deck and the ground operate through algorithmic functions on models of the aircraft and of the airspace. These models may differ from each other as a result of variations in their models of the immediate environment. The resultant flight operations or ATC commands may differ in their response requirements (e.g. different preferred descent speeds or descent initiation points). The human operators in the system must then interact with the automation to reconcile differences and resolve conflicts. We have developed a model of human performance including cognitive functions (decision-making, rule-based reasoning, procedural interruption recovery and forgetting) that supports analysis of the information requirements for resolution of flight aiding and ATC conflicts. The model represents multiple individuals in the flight crew and in ATC. The model is supported in simulation on a Silicon Graphics' workstation using Allegro Lisp. Design guidelines for aviation automation aiding systems have been developed using the model's specification of information and team procedural requirements. Empirical data on flight deck operations from full-mission flight simulation are provided to support the model's predictions. The paper describes the model, its development and implementation, the simulation test of the model predictions, and the empirical validation process. The model and its supporting data provide a generalizable tool that is being expanded to include air/ground compatibility and ATC crew interactions in air traffic management.

Bayesian isotonic density regression

PubMed Central

Wang, Lianming; Dunson, David B.

2011-01-01

Density regression models allow the conditional distribution of the response given predictors to change flexibly over the predictor space. Such models are much more flexible than nonparametric mean regression models with nonparametric residual distributions, and are well supported in many applications. A rich variety of Bayesian methods have been proposed for density regression, but it is not clear whether such priors have full support so that any true data-generating model can be accurately approximated. This article develops a new class of density regression models that incorporate stochastic-ordering constraints which are natural when a response tends to increase or decrease monotonely with a predictor. Theory is developed showing large support. Methods are developed for hypothesis testing, with posterior computation relying on a simple Gibbs sampler. Frequentist properties are illustrated in a simulation study, and an epidemiology application is considered. PMID:22822259

Top-level modeling of an als system utilizing object-oriented techniques

NASA Astrophysics Data System (ADS)

Rodriguez, L. F.; Kang, S.; Ting, K. C.

The possible configuration of an Advanced Life Support (ALS) System capable of supporting human life for long-term space missions continues to evolve as researchers investigate potential technologies and configurations. To facilitate the decision process the development of acceptable, flexible, and dynamic mathematical computer modeling tools capable of system level analysis is desirable. Object-oriented techniques have been adopted to develop a dynamic top-level model of an ALS system.This approach has several advantages; among these, object-oriented abstractions of systems are inherently modular in architecture. Thus, models can initially be somewhat simplistic, while allowing for adjustments and improvements. In addition, by coding the model in Java, the model can be implemented via the World Wide Web, greatly encouraging the utilization of the model. Systems analysis is further enabled with the utilization of a readily available backend database containing information supporting the model. The subsystem models of the ALS system model include Crew, Biomass Production, Waste Processing and Resource Recovery, Food Processing and Nutrition, and the Interconnecting Space. Each subsystem model and an overall model have been developed. Presented here is the procedure utilized to develop the modeling tool, the vision of the modeling tool, and the current focus for each of the subsystem models.

Testing a Model of Functional Impairment in Telephone Crisis Support Workers.

PubMed

Kitchingman, Taneile A; Wilson, Coralie J; Caputi, Peter; Wilson, Ian; Woodward, Alan

2017-11-01

It is well known that helping professionals experience functional impairment related to elevated symptoms of psychological distress as a result of frequent empathic engagement with distressed others. Whether telephone crisis support workers are impacted in a similar way is not currently reported in the literature. The purpose of this study was to test a hypothesized model of factors contributing to functional impairment in telephone crisis support workers. A national sample of 210 telephone crisis support workers completed an online survey including measures of emotion regulation, symptoms of general psychological distress and suicidal ideation, intentions to seek help for symptoms, and functional impairment. Structural equation modeling was used to test the fit of the data to the hypothesized model. Goodness-of-fit indices were adequate and supported the interactive effects of emotion regulation, general psychological distress, suicidal ideation, and intentions to seek help for ideation on functional impairment. These results warrant the deliberate management of telephone crisis support workers' impairment through service selection, training, supervision, and professional development strategies. Future research replicating and extending this model will further inform the modification and/or development of strategies to optimize telephone crisis support workers' well-being and delivery of support to callers.

Model Based Mission Assurance: Emerging Opportunities for Robotic Systems

NASA Technical Reports Server (NTRS)

Evans, John W.; DiVenti, Tony

2016-01-01

The emergence of Model Based Systems Engineering (MBSE) in a Model Based Engineering framework has created new opportunities to improve effectiveness and efficiencies across the assurance functions. The MBSE environment supports not only system architecture development, but provides for support of Systems Safety, Reliability and Risk Analysis concurrently in the same framework. Linking to detailed design will further improve assurance capabilities to support failures avoidance and mitigation in flight systems. This also is leading new assurance functions including model assurance and management of uncertainty in the modeling environment. Further, the assurance cases, a structured hierarchal argument or model, are emerging as a basis for supporting a comprehensive viewpoint in which to support Model Based Mission Assurance (MBMA).

Modeling of Global BEAM Structure for Evaluation of MMOD Impacts to Support Development of a Health Monitoring System

NASA Technical Reports Server (NTRS)

Lyle, Karen H.; Vassilakos, Gregory J.

2015-01-01

This report summarizes the initial modeling of the global response of the Bigelow Expandable Activity Module (BEAM) to micrometeorite and orbital debris(MMOD) impacts using a structural, nonlinear, transient dynamic, finite element code. These models complement the on-orbit deployment of the Distributed Impact Detection System (DIDS) to support structural health monitoring studies. Two global models were developed. The first focused exclusively on impacts on the soft-goods (fabric-envelop) portion of BEAM. The second incorporates the bulkhead to support understanding of bulkhead impacts. These models were exercised for random impact locations and responses monitored at the on-orbit sensor locations. The report concludes with areas for future study.

Hanford Tank 241-C-103 Residual Waste Contaminant Release Models and Supporting Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cantrell, Kirk J.; Krupka, Kenneth M.; Deutsch, William J.

2008-01-15

This report tabulates data generated by laboratory characterization and testing of three samples collected from tank C-103. The data presented here will form the basis for a release model that will be developed for tank C-103. These release models are being developed to support the tank risk assessments performed by CH2M HILL Hanford Group, Inc. for DOE.

The Air Quality Model Evaluation International Initiative ...

EPA Pesticide Factsheets

This presentation provides an overview of the Air Quality Model Evaluation International Initiative (AQMEII). It contains a synopsis of the three phases of AQMEII, including objectives, logistics, and timelines. It also provides a number of examples of analyses conducted through AQMEII with a particular focus on past and future analyses of deposition. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

Librarians and Libraries Supporting Open Access Publishing

ERIC Educational Resources Information Center

Richard, Jennifer; Koufogiannakis, Denise; Ryan, Pam

2009-01-01

As new models of scholarly communication emerge, librarians and libraries have responded by developing and supporting new methods of storing and providing access to information and by creating new publishing support services. This article will examine the roles of libraries and librarians in developing and supporting open access publishing…

Developing a Physiologically-Based Pharmacokinetic Model Knowledgebase in Support of Provisional Model Construction

EPA Science Inventory

Developing physiologically-based pharmacokinetic (PBPK) models for chemicals can be resource-intensive, as neither chemical-specific parameters nor in vivo pharmacokinetic data are easily available for model construction. Previously developed, well-parameterized, and thoroughly-v...

The General Education Collaboration Model: A Model for Successful Mainstreaming.

ERIC Educational Resources Information Center

Simpson, Richard L.; Myles, Brenda Smith

1990-01-01

The General Education Collaboration Model is designed to support general educators teaching mainstreamed disabled students, through collaboration with special educators. The model is based on flexible departmentalization, program ownership, identification and development of supportive attitudes, student assessment as a measure of program…

Regenerative life support system research

NASA Technical Reports Server (NTRS)

1988-01-01

Sections on modeling, experimental activities during the grant period, and topics under consideration for the future are contained. The sessions contain discussions of: four concurrent modeling approaches that were being integrated near the end of the period (knowledge-based modeling support infrastructure and data base management, object-oriented steady state simulations for three concepts, steady state mass-balance engineering tradeoff studies, and object-oriented time-step, quasidynamic simulations of generic concepts); interdisciplinary research activities, beginning with a discussion of RECON lab development and use, and followed with discussions of waste processing research, algae studies and subsystem modeling, low pressure growth testing of plants, subsystem modeling of plants, control of plant growth using lighting and CO2 supply as variables, search for and development of lunar soil simulants, preliminary design parameters for a lunar base life support system, and research considerations for food processing in space; and appendix materials, including a discussion of the CELSS Conference, detailed analytical equations for mass-balance modeling, plant modeling equations, and parametric data on existing life support systems for use in modeling.

The Impact of Emotional Solidarity on Residents' Attitude and Tourism Development.

PubMed

Hasani, Ali; Moghavvemi, Sedigheh; Hamzah, Amran

2016-01-01

In many countries, especially one such as Malaysia, tourism has become a key factor in economic development, and the industry heavily relies on feedback from local residents. It is essential to observe and examine the perceptions of residents towards tourists and tourism development for better planning in realizing successful and sustainable tourism development. Therefore, this research measured the relationship between residents' welcoming nature, emotional closeness, and sympathetic understanding (emotional solidarity) towards tourists and their respective attitudes towards supporting tourism development. To test the proposed research model, we collected data using a questionnaire survey from 333 residents in rural areas in Malaysia. We used the structural equation modelling technique (Amos) to evaluate the research model, and the results revealed that the residents' willingness (welcoming nature) to accept tourists is the strongest factor that effects the residents' attitudes towards supporting tourism development. However, there was no significant relationship between residents' emotional closeness and their sympathetic understanding towards tourists with their attitude and support towards tourism development. Welcoming nature, emotional closeness, and sympathetic understanding are able to predict 48% of residents' attitudes towards tourism development and 62% of their support towards tourism development.

The Impact of Emotional Solidarity on Residents’ Attitude and Tourism Development

PubMed Central

Hasani, Ali; Moghavvemi, Sedigheh; Hamzah, Amran

2016-01-01

In many countries, especially one such as Malaysia, tourism has become a key factor in economic development, and the industry heavily relies on feedback from local residents. It is essential to observe and examine the perceptions of residents towards tourists and tourism development for better planning in realizing successful and sustainable tourism development. Therefore, this research measured the relationship between residents’ welcoming nature, emotional closeness, and sympathetic understanding (emotional solidarity) towards tourists and their respective attitudes towards supporting tourism development. To test the proposed research model, we collected data using a questionnaire survey from 333 residents in rural areas in Malaysia. We used the structural equation modelling technique (Amos) to evaluate the research model, and the results revealed that the residents’ willingness (welcoming nature) to accept tourists is the strongest factor that effects the residents’ attitudes towards supporting tourism development. However, there was no significant relationship between residents’ emotional closeness and their sympathetic understanding towards tourists with their attitude and support towards tourism development. Welcoming nature, emotional closeness, and sympathetic understanding are able to predict 48% of residents’ attitudes towards tourism development and 62% of their support towards tourism development. PMID:27341569

Conceptual Foundations and Components of a Contextual Intervention to Promote Student Engagement during Early Adolescence: The Supporting Early Adolescent Learning and Social Success (SEALS) Model

ERIC Educational Resources Information Center

Farmer, Thomas W.; Hamm, Jill V.; Lane, Kathleen L.; Lee, David; Sutherland, Kevin S.; Hall, Cristin M.; Murray, Robert A.

2013-01-01

Decades of research indicate that many early adolescents are at risk for developing significant school adjustment problems in the academic, behavioral, and social domains during the transition to middle school. The Supporting Early Adolescent Learning and Social Success (SEALS) model has been developed as a professional development and…

Enhanced semantic interoperability by profiling health informatics standards.

PubMed

López, Diego M; Blobel, Bernd

2009-01-01

Several standards applied to the healthcare domain support semantic interoperability. These standards are far from being completely adopted in health information system development, however. The objective of this paper is to provide a method and suggest the necessary tooling for reusing standard health information models, by that way supporting the development of semantically interoperable systems and components. The approach is based on the definition of UML Profiles. UML profiling is a formal modeling mechanism to specialize reference meta-models in such a way that it is possible to adapt those meta-models to specific platforms or domains. A health information model can be considered as such a meta-model. The first step of the introduced method identifies the standard health information models and tasks in the software development process in which healthcare information models can be reused. Then, the selected information model is formalized as a UML Profile. That Profile is finally applied to system models, annotating them with the semantics of the information model. The approach is supported on Eclipse-based UML modeling tools. The method is integrated into a comprehensive framework for health information systems development, and the feasibility of the approach is demonstrated in the analysis, design, and implementation of a public health surveillance system, reusing HL7 RIM and DIMs specifications. The paper describes a method and the necessary tooling for reusing standard healthcare information models. UML offers several advantages such as tooling support, graphical notation, exchangeability, extensibility, semi-automatic code generation, etc. The approach presented is also applicable for harmonizing different standard specifications.

Development and Evaluation of a Model-Supported Scientific Inquiry Training Program for Elementary Teachers in Indonesia

ERIC Educational Resources Information Center

Ertikanto, Chandra; Herpratiwi; Yunarti, Tina; Saputra, Andrian

2017-01-01

A teacher training program, named Model-Supported Scientific Inquiry Training Program (MSSITP) has been successfully developed to improve the inquiry skills of Indonesian elementary teachers. The skills enhanced by MSSITP are defining problems, formulating hypotheses, planning and doing investigations, drawing conclusions, and communicating the…

The Impact of Organisational Support for Career Development on Career Satisfaction

ERIC Educational Resources Information Center

Barnett, Belinda Renee; Bradley, Lisa

2007-01-01

Purpose: The purpose of this study was to examine the relationship between organisational support for career development (OSCD) and employees' career satisfaction. Based on an extended model of social cognitive career theory (SCCT) and an integrative model of proactive behaviours, the study proposed that career management behaviours would mediate…

Gaps of Decision Support Models for Pipeline Renewal and Recommendations for Improvement

EPA Science Inventory

In terms of the development of software for decision support for pipeline renewal, more attention to date has been paid to the development of asset management models that help an owner decide on which portions of a system to prioritize needed actions. There has been much less w...

GAPS OF DECISION SUPPORT MODELS FOR PIPELINE RENEWAL AND RECOMMENDATIONS FOR IMPROVEMENT (SLIDE)

EPA Science Inventory

In terms of the development of software for decision support for pipeline renewal, more attention to date has been paid to the development of asset management models that help an owner decide on which portions of a system to prioritize needed actions. There has been much less wor...

Developing calculus textbook model that supported with GeoGebra to enhancing students’ mathematical problem solving and mathematical representation

NASA Astrophysics Data System (ADS)

Dewi, N. R.; Arini, F. Y.

2018-03-01

The main purpose of this research is developing and produces a Calculus textbook model that supported with GeoGebra. This book was designed to enhancing students’ mathematical problem solving and mathematical representation. There were three stages in this research i.e. define, design, and develop. The textbooks consisted of 6 chapters which each chapter contains introduction, core materials and include examples and exercises. The textbook developed phase begins with the early stages of designed the book (draft 1) which then validated by experts. Revision of draft 1 produced draft 2. The data were analyzed with descriptive statistics. The analysis showed that the Calculus textbook model that supported with GeoGebra, valid and fill up the criteria of practicality.

Investigation of Models and Estimation Techniques for GPS Attitude Determination

NASA Technical Reports Server (NTRS)

Garrick, J.

1996-01-01

Much work has been done in the Flight Dynamics Analysis Branch (FDAB) in developing algorithms to met the new and growing field of attitude determination using the Global Positioning SYstem (GPS) constellation of satellites. Flight Dynamics has the responsibility to investigate any new technology and incorporate the innovations in the attitude ground support systems developed to support future missions. The work presented here is an investigative analysis that will produce the needed adaptation to allow the Flight Dynamics Support System (FDSS) to incorporate GPS phase measurements and produce observation measurements compatible with the FDSS. A simulator was developed to produce the necessary measurement data to test the models developed for the different estimation techniques used by FDAB. This paper gives an overview of the current modeling capabilities of the simulator models and algorithms for the adaptation of GPS measurement data and results from each of the estimation techniques. Future analysis efforts to evaluate the simulator and models against inflight GPS measurement data are also outlined.

Mathematical Modeling Of Life-Support Systems

NASA Technical Reports Server (NTRS)

Seshan, Panchalam K.; Ganapathi, Balasubramanian; Jan, Darrell L.; Ferrall, Joseph F.; Rohatgi, Naresh K.

1994-01-01

Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

Toward the Modularization of Decision Support Systems

NASA Astrophysics Data System (ADS)

Raskin, R. G.

2009-12-01

Decision support systems are typically developed entirely from scratch without the use of modular components. This “stovepiped” approach is inefficient and costly because it prevents a developer from leveraging the data, models, tools, and services of other developers. Even when a decision support component is made available, it is difficult to know what problem it solves, how it relates to other components, or even that the component exists, The Spatial Decision Support (SDS) Consortium was formed in 2008 to organize the body of knowledge in SDS within a common portal. The portal identifies the canonical steps in the decision process and enables decision support components to be registered, categorized, and searched. This presentation describes how a decision support system can be assembled from modular models, data, tools and services, based on the needs of the Earth science application.

Implementing a Technology-Supported Model for Cross-Organisational Learning and Knowledge Building for Teachers

ERIC Educational Resources Information Center

Tammets, Kairit; Pata, Kai; Laanpere, Mart

2012-01-01

This study proposed using the elaborated learning and knowledge building model (LKB model) derived from Nonaka and Takeuchi's knowledge management model for supporting cross-organisational teacher development in the temporarily extended organisations composed of universities and schools. It investigated the main LKB model components in the context…

Community And Stakeholder Engagement With A University-Based Storm Research Team And Program During Events: Progressive Awareness, Cooperation And Mutual Support.

NASA Astrophysics Data System (ADS)

Gayes, P. T.; Bao, S.; Yan, T.; Pietrafesa, L. J.; Hallstrom, J.; Stirling, D.; Mullikin, T.; McClam, M.; Byrd, M.; Aucoin, K.; Marosites, B.

2017-12-01

HUGO: The HUrricane Genesis and Outlook program is a research initiative spanning new approaches to Atlantic tropical season outlooking to a storm event-related interactively coupled model system. In addition to supporting faculty and student academic research it has progressively been engaged by diverse regional interests in the public and private sector. The seasonal outlook incorporates 22 regional-to-global climate drivers developed from the historical storm database and has shown good skill related to historical storm seasons within the development of the model as well as the last several years in an outlook capacity. The event scale model is a based upon a fully interactively coupled model system incorporating ocean, atmosphere, wave and surge/flood models. The recent cluster of storms impacting the Southeast US provided an opportunity to test the model system and helped develop strong collaborative interests across diverse groups seeking to facilitate local capacity and access to additional storm-related information, observations and expertise. The SC State Guard has actively engaged the HUGO team in carrying out their charge in emergency responders planning and activities during several recent storms and flooding events. They were instrumental in developing support to expand observational systems aiding model validation and development as well as develop access pathways for deployment of new observational technology developed through NSF sponsored projects (Intelligent River and Hurricane-RAPID) with ISENSE at Florida Atlantic University to advance observational capability and density especially during or immediately following events. At the same time an increasing number of county-level emergency and environmental managers and private sector interests have similarly been working collaborately towards expanding observational systems contributing to the goals of the growing storm-oriented cooperative and as well as broader national MesoUS goals. Collectively, the interaction and partnering have aided and advanced diverse interests, enabled direct and in-kind support towards mutual goals and enabled considerable leverage of resources focused on science and supporting applications.

Dementia service centres in Austria: A comprehensive support and early detection model for persons with dementia and their caregivers – theoretical foundations and model description

PubMed Central

Span, Edith; Reisberg, Barry

2015-01-01

Despite the highly developed social services in Austria, the County of Upper Austria, one of the nine counties of Austria had only very limited specialized services for persons with dementia and their caregivers in 2001. Support groups existed in which the desire for more specialized services was voiced. In response to this situation, funding was received to develop a new structure for early disease detection and long term support for both the person with dementia and their caregivers. This article describes the development of the model of the Dementia Service Centres (DSCs) and the successes and difficulties encountered in the process of implementing the model in six different rural regions of Upper Austria. The DSC was described in the First Austrian Dementia Report as one of the potential service models for the future. PMID:24339114

Dementia service centres in Austria: A comprehensive support and early detection model for persons with dementia and their caregivers - theoretical foundations and model description.

PubMed

Auer, Stefanie R; Span, Edith; Reisberg, Barry

2015-07-01

Despite the highly developed social services in Austria, the County of Upper Austria, one of the nine counties of Austria had only very limited specialized services for persons with dementia and their caregivers in 2001. Support groups existed in which the desire for more specialized services was voiced. In response to this situation, funding was received to develop a new structure for early disease detection and long term support for both the person with dementia and their caregivers. This article describes the development of the model of the Dementia Service Centres (DSCs) and the successes and difficulties encountered in the process of implementing the model in six different rural regions of Upper Austria. The DSC was described in the First Austrian Dementia Report as one of the potential service models for the future. © The Author(s) 2013.

Regenerative life support system research and concepts

NASA Technical Reports Server (NTRS)

1988-01-01

Life support systems that involve recycling of atmospheres, water, food and waste are so complex that models incorporating all the interactions and relationships are vital to design, development, simulations, and ultimately to control of space qualified systems. During early modeling studies, FORTRAN and BASIC programs were used to obtain numerical comparisons of the performance of different regenerative concepts. Recently, models were made by combining existing capabilities with expert systems to establish an Intelligent Design Support Environment for simpliflying user interfaces and to address the need for the engineering aspects. Progress was also made toward modeling and evaluating the operational aspects of closed loop life support systems using Time-step and Dynamic simulations over a period of time. Example models are presented which show the status and potential of developed modeling techniques. For instance, closed loop systems involving algae systeMs for atmospheric purification and food supply augmentation, plus models employing high plants and solid waste electrolysis are described and results of initial evaluations are presented.

The relationship between leadership support, workplace health promotion and employee wellbeing in South Africa.

PubMed

Milner, Karen; Greyling, Michael; Goetzel, Ron; Da Silva, Roseanne; Kolbe-Alexander, Tracey; Patel, Deepak; Nossel, Craig; Beckowski, Megan

2015-09-01

Leadership support has been identified as an essential component of successful workplace health promotion (WHP) programs. However, there is little research in this area and even less theoretical conceptualization on ways in which leadership support for WHP is related to improved employee wellbeing. In this paper, we developed and tested a model of leadership support for WHP and employee wellbeing outcomes using employer and employee data gathered from 71 South African organizations. A theoretical model based on social exchange theory was developed. It was hypothesized that perceptions of company commitment to health promotion mediates the relationship between leadership support, the provision of WHP facilities and employee wellbeing. A hierarchical structural equation modeling technique was used to test the model. We determined that leaders' support for WHP was important insofar as they also provided health promotion facilities to their employees. No direct relationship was found between leadership support alone and employee wellbeing. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Impacts of Lateral Boundary Conditions on US Ozone ...

EPA Pesticide Factsheets

Chemical boundary conditions are a key input to regional-scale photochemical models. In this study, we perform annual simulations over North America with chemical boundary conditions prepared from two global models (GEOS-CHEM and Hemispheric CMAQ). Results indicate that the impacts of different boundary conditions on ozone can be significant throughout the year. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

An Interactive Design Space Supporting Development of Vehicle Architecture Concept Models

DTIC Science & Technology

2011-01-01

Denver, Colorado, USA IMECE2011-64510 AN INTERACTIVE DESIGN SPACE SUPPORTING DEVELOPMENT OF VEHICLE ARCHITECTURE CONCEPT MODELS Gary Osborne...early in the development cycle. Optimization taking place later in the cycle usually occurs at the detail design level, and tends to result in...architecture changes may be imposed, but such modifications are equivalent to a huge optimization cycle covering almost the entire design process, and

An Interactive Design Space Supporting Development of Vehicle Architecture Concept Models

DTIC Science & Technology

2011-06-17

ponents that are not designed to carry structural loads in the assembly, such as seats and other trim items. However, these inertial items have an...Denver, Colorado, USA IMECE2011-64510 AN INTERACTIVE DESIGN SPACE SUPPORTING DEVELOPMENT OF VEHICLE ARCHITECTURE CONCEPT MODELS Gary Osborne...early in the development cycle. Optimization taking place later in the cycle usually occurs at the detail design level, and tends to result in

Integrating Parenting Support Within and Beyond the Pediatric Medical Home.

PubMed

Linton, Julie M; Stockton, Maria Paz; Andrade, Berta; Daniel, Stephanie

2018-01-01

Positive parenting programs, developmental support services, and evidence-based home visiting programs can effectively provide parenting support and improve health and developmental outcomes for at-risk children. Few models, however, have integrated referrals for on-site support and home visiting programs into the provision of routine pediatric care within a medical home. This article describes an innovative approach, through partnership with a community-based organization, to deliver on-site and home visiting support services for children and families within and beyond the medical home. Our model offers a system of on-site services, including parenting, behavior, and/or development support, with optional intensive home visiting services. Assessment included description of the population served, delineation of services provided, and qualitative identification of key themes of the impact of services, illustrated by case examples. This replicable model describes untapped potential of the pediatric medical home as a springboard to mitigate risk and optimize children's health and development.

Development of a support software system for real-time HAL/S applications

NASA Technical Reports Server (NTRS)

Smith, R. S.

1984-01-01

Methodologies employed in defining and implementing a software support system for the HAL/S computer language for real-time operations on the Shuttle are detailed. Attention is also given to the management and validation techniques used during software development and software maintenance. Utilities developed to support the real-time operating conditions are described. With the support system being produced on Cyber computers and executable code then processed through Cyber or PDP machines, the support system has a production level status and can serve as a model for other software development projects.

COMMUNITY MULTISCALE AIR QUALITY MODELING SYSTEM (ONE ATMOSPHERE)

EPA Science Inventory

This task supports ORD's strategy by providing responsive technical support of EPA's mission and provides credible state of the art air quality models and guidance. This research effort is to develop and improve the Community Multiscale Air Quality (CMAQ) modeling system, a mu...

Developing a workplace breast feeding support model for employed lactating mothers.

PubMed

Yimyam, Susanha; Hanpa, Wasana

2014-06-01

Resuming work is often considered an obstacle for continued breast feeding. The objectives of this participatory action research study were to develop a breast feeding support model in the workplace and to compare breast feeding rates before and after implementation of the breast feeding support campaign. Twenty-four women participated before the implementation of the breast feeding support campaign, whereas 31 women participated after the campaign. Data were collected by interviewing employed women about their breast feeding practices within six months post partum. Additional data were collected through interviews with the workplace administrator and head of work sections as well as observation of the breast feeding support campaigns. Qualitative data were analysed using thematic analysis, whereas quantitative data were analysed using descriptive statistics and χ(2) test. The workplace breast feeding support model was developed based on the concept of Mother-Friendly Workplace Initiatives by the World Alliance for Breastfeeding Action (WABA) and the Thai government׳s promotion of a workplace breast feeding corner. Within this model, a committee for breast feeding support was created for working with the research team to develop breast feeding activities and media for breast feeding education and breast feeding support campaigns in the workplace. Breast feeding rates at six months after implementation of the breast feeding support campaign were significantly higher than rates before, both for exclusive breast feeding and any breast feeding at levels .004 and .033, respectively. These results suggest that breast feeding should be encouraged in every workplace depending on context. Individual advice and help for employed mothers should be provided from pregnancy through weaning in the postpartum period. Copyright © 2014 Elsevier Ltd. All rights reserved.

Understanding well-being and learning of Nigerian nurses: a job demand control support model approach.

PubMed

van Doorn, Yvonne; van Ruysseveldt, Joris; van Dam, Karen; Mistiaen, Wilhelm; Nikolova, Irina

2016-10-01

This study investigated whether Nigerian nurses' emotional exhaustion and active learning were predicted by job demands, control and social support. Limited research has been conducted concerning nurses' work stress in developing countries, such as Nigeria. Accordingly, it is not clear whether work interventions for improving nurses' well-being in these countries can be based on work stress models that are developed in Western countries, such as the job demand control support model, as well as on empirical findings of job demand control support research. Nurses from Nurses Across the Borders Nigeria were invited to complete an online questionnaire containing validated scales; 210 questionnaires were fully completed and analysed. Multiple regression analysis was used to test the hypotheses. Emotional exhaustion was higher for nurses who experienced high demands and low supervisor support. Active learning occurred when nurses worked under conditions of high control and high supervisor support. The findings suggest that the job demand control support model is applicable in a Nigerian nursing situation; the model indicates which occupational stressors contribute to poor well-being in Nigerian nurses and which work characteristics may boost nurses' active learning. Job (re)design interventions can enhance nurses' well-being and learning by guarding nurses' job demands, and stimulating job control and supervisor support. © 2016 John Wiley & Sons Ltd.

Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

NASA Technical Reports Server (NTRS)

Ebeling, Charles E.

1996-01-01

This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

Saul: Towards Declarative Learning Based Programming

PubMed Central

Kordjamshidi, Parisa; Roth, Dan; Wu, Hao

2015-01-01

We present Saul, a new probabilistic programming language designed to address some of the shortcomings of programming languages that aim at advancing and simplifying the development of AI systems. Such languages need to interact with messy, naturally occurring data, to allow a programmer to specify what needs to be done at an appropriate level of abstraction rather than at the data level, to be developed on a solid theory that supports moving to and reasoning at this level of abstraction and, finally, to support flexible integration of these learning and inference models within an application program. Saul is an object-functional programming language written in Scala that facilitates these by (1) allowing a programmer to learn, name and manipulate named abstractions over relational data; (2) supporting seamless incorporation of trainable (probabilistic or discriminative) components into the program, and (3) providing a level of inference over trainable models to support composition and make decisions that respect domain and application constraints. Saul is developed over a declaratively defined relational data model, can use piecewise learned factor graphs with declaratively specified learning and inference objectives, and it supports inference over probabilistic models augmented with declarative knowledge-based constraints. We describe the key constructs of Saul and exemplify its use in developing applications that require relational feature engineering and structured output prediction. PMID:26635465

Saul: Towards Declarative Learning Based Programming.

PubMed

Kordjamshidi, Parisa; Roth, Dan; Wu, Hao

2015-07-01

We present Saul , a new probabilistic programming language designed to address some of the shortcomings of programming languages that aim at advancing and simplifying the development of AI systems. Such languages need to interact with messy, naturally occurring data, to allow a programmer to specify what needs to be done at an appropriate level of abstraction rather than at the data level, to be developed on a solid theory that supports moving to and reasoning at this level of abstraction and, finally, to support flexible integration of these learning and inference models within an application program. Saul is an object-functional programming language written in Scala that facilitates these by (1) allowing a programmer to learn, name and manipulate named abstractions over relational data; (2) supporting seamless incorporation of trainable (probabilistic or discriminative) components into the program, and (3) providing a level of inference over trainable models to support composition and make decisions that respect domain and application constraints. Saul is developed over a declaratively defined relational data model, can use piecewise learned factor graphs with declaratively specified learning and inference objectives, and it supports inference over probabilistic models augmented with declarative knowledge-based constraints. We describe the key constructs of Saul and exemplify its use in developing applications that require relational feature engineering and structured output prediction.

Development of assessment tools to measure organizational support for employee health.

PubMed

Golaszewski, Thomas; Barr, Donald; Pronk, Nico

2003-01-01

To develop systems that measure and effect organizational support for employee health. Multiple studies and developmental projects were reviewed that show the process of instrument development, metric quality testing, utilization within intervention studies, and prediction modeling efforts. Demographic patterns indicate high support levels and relationships of subsections to various employee health risks. Successes with the initial version have given rise to 2 additional evaluation tools. The availability of these systems illustrates how ecological models can be practically applied. Such efforts contribute to the paradigm shift in worksite health promotion that focuses on the organization as the target of intervention.

Decision support models for solid waste management: Review and game-theoretic approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karmperis, Athanasios C., E-mail: athkarmp@mail.ntua.gr; Army Corps of Engineers, Hellenic Army General Staff, Ministry of Defence; Aravossis, Konstantinos

Highlights: ► The mainly used decision support frameworks for solid waste management are reviewed. ► The LCA, CBA and MCDM models are presented and their strengths, weaknesses, similarities and possible combinations are analyzed. ► The game-theoretic approach in a solid waste management context is presented. ► The waste management bargaining game is introduced as a specific decision support framework. ► Cooperative and non-cooperative game-theoretic approaches to decision support for solid waste management are discussed. - Abstract: This paper surveys decision support models that are commonly used in the solid waste management area. Most models are mainly developed within three decisionmore » support frameworks, which are the life-cycle assessment, the cost–benefit analysis and the multi-criteria decision-making. These frameworks are reviewed and their strengths and weaknesses as well as their critical issues are analyzed, while their possible combinations and extensions are also discussed. Furthermore, the paper presents how cooperative and non-cooperative game-theoretic approaches can be used for the purpose of modeling and analyzing decision-making in situations with multiple stakeholders. Specifically, since a waste management model is sustainable when considering not only environmental and economic but also social aspects, the waste management bargaining game is introduced as a specific decision support framework in which future models can be developed.« less

An Update on Improvements to NiCE Support for PROTEUS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, Andrew; McCaskey, Alexander J.; Billings, Jay Jay

2015-09-01

The Department of Energy Office of Nuclear Energy's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program has supported the development of the NEAMS Integrated Computational Environment (NiCE), a modeling and simulation workflow environment that provides services and plugins to facilitate tasks such as code execution, model input construction, visualization, and data analysis. This report details the development of workflows for the reactor core neutronics application, PROTEUS. This advanced neutronics application (primarily developed at Argonne National Laboratory) aims to improve nuclear reactor design and analysis by providing an extensible and massively parallel, finite-element solver for current and advanced reactor fuel neutronicsmore » modeling. The integration of PROTEUS-specific tools into NiCE is intended to make the advanced capabilities that PROTEUS provides more accessible to the nuclear energy research and development community. This report will detail the work done to improve existing PROTEUS workflow support in NiCE. We will demonstrate and discuss these improvements, including the development of flexible IO services, an improved interface for input generation, and the addition of advanced Fortran development tools natively in the platform.« less

Breaking the barriers to commercialization of MEMS: a firm's search for competitive advantage

NASA Astrophysics Data System (ADS)

Walsh, Steven T.; Linton, Jonathan D.

1999-08-01

A model of infrastructure development for MEMS manufacturing Technologies is offered. The role of discontinuous innovation in achieving competitive advantage is briefly reviewed. This is followed by the development of a model that describes the stages in the growth of an infrastructure to support Micro-Electro-Mechanical-Systems infrastructure. We briefly describe how an infrastructure gradually grows to support a new industry, resulting from discontinuous innovation. the model indicates the evolving nature of the actions and investments that firms and governments need to make to support the growth of an immature industry. Consequently, we aim to not only offer a descriptive model, but offer guidance to firms on whether their intentions and resources fit with the state of the industry and to offer policy makers guidance on the timing of different types of support.

Adjustable Autonomy Testbed

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schrenkenghost, Debra K.

2001-01-01

The Adjustable Autonomy Testbed (AAT) is a simulation-based testbed located in the Intelligent Systems Laboratory in the Automation, Robotics and Simulation Division at NASA Johnson Space Center. The purpose of the testbed is to support evaluation and validation of prototypes of adjustable autonomous agent software for control and fault management for complex systems. The AA T project has developed prototype adjustable autonomous agent software and human interfaces for cooperative fault management. This software builds on current autonomous agent technology by altering the architecture, components and interfaces for effective teamwork between autonomous systems and human experts. Autonomous agents include a planner, flexible executive, low level control and deductive model-based fault isolation. Adjustable autonomy is intended to increase the flexibility and effectiveness of fault management with an autonomous system. The test domain for this work is control of advanced life support systems for habitats for planetary exploration. The CONFIG hybrid discrete event simulation environment provides flexible and dynamically reconfigurable models of the behavior of components and fluids in the life support systems. Both discrete event and continuous (discrete time) simulation are supported, and flows and pressures are computed globally. This provides fast dynamic simulations of interacting hardware systems in closed loops that can be reconfigured during operations scenarios, producing complex cascading effects of operations and failures. Current object-oriented model libraries support modeling of fluid systems, and models have been developed of physico-chemical and biological subsystems for processing advanced life support gases. In FY01, water recovery system models will be developed.

Quality tracing in meat supply chains

PubMed Central

Mack, Miriam; Dittmer, Patrick; Veigt, Marius; Kus, Mehmet; Nehmiz, Ulfert; Kreyenschmidt, Judith

2014-01-01

The aim of this study was the development of a quality tracing model for vacuum-packed lamb that is applicable in different meat supply chains. Based on the development of relevant sensory parameters, the predictive model was developed by combining a linear primary model and the Arrhenius model as the secondary model. Then a process analysis was conducted to define general requirements for the implementation of the temperature-based model into a meat supply chain. The required hardware and software for continuous temperature monitoring were developed in order to use the model under practical conditions. Further on a decision support tool was elaborated in order to use the model as an effective tool in combination with the temperature monitoring equipment for the improvement of quality and storage management within the meat logistics network. Over the long term, this overall procedure will support the reduction of food waste and will improve the resources efficiency of food production. PMID:24797136

Quality tracing in meat supply chains.

PubMed

Mack, Miriam; Dittmer, Patrick; Veigt, Marius; Kus, Mehmet; Nehmiz, Ulfert; Kreyenschmidt, Judith

2014-06-13

The aim of this study was the development of a quality tracing model for vacuum-packed lamb that is applicable in different meat supply chains. Based on the development of relevant sensory parameters, the predictive model was developed by combining a linear primary model and the Arrhenius model as the secondary model. Then a process analysis was conducted to define general requirements for the implementation of the temperature-based model into a meat supply chain. The required hardware and software for continuous temperature monitoring were developed in order to use the model under practical conditions. Further on a decision support tool was elaborated in order to use the model as an effective tool in combination with the temperature monitoring equipment for the improvement of quality and storage management within the meat logistics network. Over the long term, this overall procedure will support the reduction of food waste and will improve the resources efficiency of food production.

Ensemble modelling and structured decision-making to support Emergency Disease Management.

PubMed

Webb, Colleen T; Ferrari, Matthew; Lindström, Tom; Carpenter, Tim; Dürr, Salome; Garner, Graeme; Jewell, Chris; Stevenson, Mark; Ward, Michael P; Werkman, Marleen; Backer, Jantien; Tildesley, Michael

2017-03-01

Epidemiological models in animal health are commonly used as decision-support tools to understand the impact of various control actions on infection spread in susceptible populations. Different models contain different assumptions and parameterizations, and policy decisions might be improved by considering outputs from multiple models. However, a transparent decision-support framework to integrate outputs from multiple models is nascent in epidemiology. Ensemble modelling and structured decision-making integrate the outputs of multiple models, compare policy actions and support policy decision-making. We briefly review the epidemiological application of ensemble modelling and structured decision-making and illustrate the potential of these methods using foot and mouth disease (FMD) models. In case study one, we apply structured decision-making to compare five possible control actions across three FMD models and show which control actions and outbreak costs are robustly supported and which are impacted by model uncertainty. In case study two, we develop a methodology for weighting the outputs of different models and show how different weighting schemes may impact the choice of control action. Using these case studies, we broadly illustrate the potential of ensemble modelling and structured decision-making in epidemiology to provide better information for decision-making and outline necessary development of these methods for their further application. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Influence of backup bearings and support structure dynamics on the behavior of rotors with active supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1995-01-01

This semiannual status report lists specific accomplishments made on the research of the influence of backup bearings and support structure dynamics on the behavior of rotors with active supports. Papers have been presented representing work done on the T-501 engine model; an experimental/simulation study of auxiliary bearing rotordynamics; and a description of a rotordynamical model for a magnetic bearing supported rotor system, including auxiliary bearing effects. A finite element model for a foil bearing has been developed. Additional studies of rotor/bearing/housing dynamics are currently being performed as are studies of the effects of sideloading on auxiliary bearing rotordynamics using the magnetic bearing supported rotor model.

Computer-aided operations engineering with integrated models of systems and operations

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Ryan, Dan; Fleming, Land

1994-01-01

CONFIG 3 is a prototype software tool that supports integrated conceptual design evaluation from early in the product life cycle, by supporting isolated or integrated modeling, simulation, and analysis of the function, structure, behavior, failures and operation of system designs. Integration and reuse of models is supported in an object-oriented environment providing capabilities for graph analysis and discrete event simulation. Integration is supported among diverse modeling approaches (component view, configuration or flow path view, and procedure view) and diverse simulation and analysis approaches. Support is provided for integrated engineering in diverse design domains, including mechanical and electro-mechanical systems, distributed computer systems, and chemical processing and transport systems. CONFIG supports abstracted qualitative and symbolic modeling, for early conceptual design. System models are component structure models with operating modes, with embedded time-related behavior models. CONFIG supports failure modeling and modeling of state or configuration changes that result in dynamic changes in dependencies among components. Operations and procedure models are activity structure models that interact with system models. CONFIG is designed to support evaluation of system operability, diagnosability and fault tolerance, and analysis of the development of system effects of problems over time, including faults, failures, and procedural or environmental difficulties.

Application of Diagnostic Analysis Tools to the Ares I Thrust Vector Control System

NASA Technical Reports Server (NTRS)

Maul, William A.; Melcher, Kevin J.; Chicatelli, Amy K.; Johnson, Stephen B.

2010-01-01

The NASA Ares I Crew Launch Vehicle is being designed to support missions to the International Space Station (ISS), to the Moon, and beyond. The Ares I is undergoing design and development utilizing commercial-off-the-shelf tools and hardware when applicable, along with cutting edge launch technologies and state-of-the-art design and development. In support of the vehicle s design and development, the Ares Functional Fault Analysis group was tasked to develop an Ares Vehicle Diagnostic Model (AVDM) and to demonstrate the capability of that model to support failure-related analyses and design integration. One important component of the AVDM is the Upper Stage (US) Thrust Vector Control (TVC) diagnostic model-a representation of the failure space of the US TVC subsystem. This paper first presents an overview of the AVDM, its development approach, and the software used to implement the model and conduct diagnostic analysis. It then uses the US TVC diagnostic model to illustrate details of the development, implementation, analysis, and verification processes. Finally, the paper describes how the AVDM model can impact both design and ground operations, and how some of these impacts are being realized during discussions of US TVC diagnostic analyses with US TVC designers.

Strategies for Teaching Regional Climate Modeling: Online Professional Development for Scientists and Decision Makers

NASA Astrophysics Data System (ADS)

Walton, P.; Yarker, M. B.; Mesquita, M. D. S.; Otto, F. E. L.

2014-12-01

There is a clear role for climate science in supporting decision making at a range of scales and in a range of contexts: from Global to local, from Policy to Industry. However, clear a role climate science can play, there is also a clear discrepancy in the understanding of how to use the science and associated tools (such as climate models). Despite there being a large body of literature on the science there is clearly a need to provide greater support in how to apply appropriately. However, access to high quality professional development courses can be problematic, due to geographic, financial and time constraints. In attempt to address this gap we independently developed two online professional courses that focused on helping participants use and apply two regional climate models, WRF and PRECIS. Both courses were designed to support participants' learning through tutor led programs that covered the basic climate scientific principles of regional climate modeling and how to apply model outputs. The fundamental differences between the two courses are: 1) the WRF modeling course expected participants to design their own research question that was then run on a version of the model, whereas 2) the PRECIS course concentrated on the principles of regional modeling and how the climate science informed the modeling process. The two courses were developed to utilise the cost and time management benefits associated with eLearning, with the recognition that this mode of teaching can also be accessed internationally, providing professional development courses in countries that may not be able to provide their own. The development teams saw it as critical that the courses reflected sound educational theory, to ensure that participants had the maximum opportunity to learn successfully. In particular, the role of reflection is central to both course structures to help participants make sense of the science in relation to their own situation. This paper details the different structures of both courses, evaluating the advantages and disadvantages of each, along with the educational approaches used. We conclude by proposing a framework for the develop of educationally robust online professional development programs that actively supports decision makers in understanding, developing and applying regional climate models.

Advancing Collaboration through Hydrologic Data and Model Sharing

NASA Astrophysics Data System (ADS)

Tarboton, D. G.; Idaszak, R.; Horsburgh, J. S.; Ames, D. P.; Goodall, J. L.; Band, L. E.; Merwade, V.; Couch, A.; Hooper, R. P.; Maidment, D. R.; Dash, P. K.; Stealey, M.; Yi, H.; Gan, T.; Castronova, A. M.; Miles, B.; Li, Z.; Morsy, M. M.

2015-12-01

HydroShare is an online, collaborative system for open sharing of hydrologic data, analytical tools, and models. It supports the sharing of and collaboration around "resources" which are defined primarily by standardized metadata, content data models for each resource type, and an overarching resource data model based on the Open Archives Initiative's Object Reuse and Exchange (OAI-ORE) standard and a hierarchical file packaging system called "BagIt". HydroShare expands the data sharing capability of the CUAHSI Hydrologic Information System by broadening the classes of data accommodated to include geospatial and multidimensional space-time datasets commonly used in hydrology. HydroShare also includes new capability for sharing models, model components, and analytical tools and will take advantage of emerging social media functionality to enhance information about and collaboration around hydrologic data and models. It also supports web services and server/cloud based computation operating on resources for the execution of hydrologic models and analysis and visualization of hydrologic data. HydroShare uses iRODS as a network file system for underlying storage of datasets and models. Collaboration is enabled by casting datasets and models as "social objects". Social functions include both private and public sharing, formation of collaborative groups of users, and value-added annotation of shared datasets and models. The HydroShare web interface and social media functions were developed using the Django web application framework coupled to iRODS. Data visualization and analysis is supported through the Tethys Platform web GIS software stack. Links to external systems are supported by RESTful web service interfaces to HydroShare's content. This presentation will introduce the HydroShare functionality developed to date and describe ongoing development of functionality to support collaboration and integration of data and models.

Contextual Development: Situating the Social Change Model of Leadership Development within a Broader Reality of Comprehensive Support

ERIC Educational Resources Information Center

Whitten-Andrews, Jeanie

2016-01-01

The social change model has proven an effective and widely utilized model assisting college students in leadership development toward positive social change. However, while this particular model gives much needed attention to the process of development leading to social change, it fails to acknowledge the external factors which significantly…

A Wavelet Support Vector Machine Combination Model for Singapore Tourist Arrival to Malaysia

NASA Astrophysics Data System (ADS)

Rafidah, A.; Shabri, Ani; Nurulhuda, A.; Suhaila, Y.

2017-08-01

In this study, wavelet support vector machine model (WSVM) is proposed and applied for monthly data Singapore tourist time series prediction. The WSVM model is combination between wavelet analysis and support vector machine (SVM). In this study, we have two parts, first part we compare between the kernel function and second part we compare between the developed models with single model, SVM. The result showed that kernel function linear better than RBF while WSVM outperform with single model SVM to forecast monthly Singapore tourist arrival to Malaysia.

Impact of implant support on mandibular free-end base removable partial denture: theoretical study.

PubMed

Oh, Won-suk; Oh, Tae-Ju; Park, Ju-mi

2016-02-01

This study investigated the impact of implant support on the development of shear force and bending moment in mandibular free-end base removable partial dentures (RPDs). Three theoretical test models of unilateral mandibular free-end base RPDs were constructed to represent the base of tooth replacement, as follows: Model 1: first and second molars (M1 and M2); Model 2: second premolar (P2), M1, and M2; and Model 3: first premolar (P1), P2, M1, and M2. The implant support located either at M1 or M2 sites. The occlusal loading was concentrated at each replacement tooth to calculate the stress resultants developed in the RPD models using the free-body diagrams of shear force and bending moment. There was a trend of reduction in the peak shear force and bending moment when the base was supported by implant. However, the degree of reduction varied with the location of implant support. The moment reduced by 76% in Model 1, 58% in Model 2, and 42% in Model 3, when the implant location shifted from M1 to M2 sites. The shear forces and bending moments subjected to mandibular free-end base RPDs were found to decrease with the addition of implant support. However, the impact of implant support varied with the location of implant in this theoretical study. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Integrating O/S models during conceptual design, part 2

NASA Technical Reports Server (NTRS)

Ebeling, Charles E.

1994-01-01

This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) under NASA research grant NAG-1-1327. The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. Additional documentation concerning the development of this model may be found in Part 1 of this report. This is the 2nd part of a 3 part technical report.

Unmix 6.0 Model for environmental data analyses

EPA Pesticide Factsheets

Unmix Model is a mathematical receptor model developed by EPA scientists that provides scientific support for the development and review of the air and water quality standards, exposure research, and environmental forensics.

Development of cost-effective pavement treatment selection and treatment performance models : [tech summary].

DOT National Transportation Integrated Search

2015-09-01

The overall objective of this study was to develop pavement treatment performance : models in support of cost-e ective selection of pavement treatment type, project : boundaries, and time of treatment. The development of the proposed models was ba...

Intelligent Elements for ISHM

NASA Technical Reports Server (NTRS)

Schmalzel, John L.; Morris, Jon; Turowski, Mark; Figueroa, Fernando; Oostdyk, Rebecca

2008-01-01

There are a number of architecture models for implementing Integrated Systems Health Management (ISHM) capabilities. For example, approaches based on the OSA-CBM and OSA-EAI models, or specific architectures developed in response to local needs. NASA s John C. Stennis Space Center (SSC) has developed one such version of an extensible architecture in support of rocket engine testing that integrates a palette of functions in order to achieve an ISHM capability. Among the functional capabilities that are supported by the framework are: prognostic models, anomaly detection, a data base of supporting health information, root cause analysis, intelligent elements, and integrated awareness. This paper focuses on the role that intelligent elements can play in ISHM architectures. We define an intelligent element as a smart element with sufficient computing capacity to support anomaly detection or other algorithms in support of ISHM functions. A smart element has the capabilities of supporting networked implementations of IEEE 1451.x smart sensor and actuator protocols. The ISHM group at SSC has been actively developing intelligent elements in conjunction with several partners at other Centers, universities, and companies as part of our ISHM approach for better supporting rocket engine testing. We have developed several implementations. Among the key features for these intelligent sensors is support for IEEE 1451.1 and incorporation of a suite of algorithms for determination of sensor health. Regardless of the potential advantages that can be achieved using intelligent sensors, existing large-scale systems are still based on conventional sensors and data acquisition systems. In order to bring the benefits of intelligent sensors to these environments, we have also developed virtual implementations of intelligent sensors.

A Bridging Opportunities Work-frame to develop mobile applications for clinical decision making

PubMed Central

van Rooij, Tibor; Rix, Serena; Moore, James B; Marsh, Sharon

2015-01-01

Background: Mobile applications (apps) providing clinical decision support (CDS) may show the greatest promise when created by and for frontline clinicians. Our aim was to create a generic model enabling healthcare providers to direct the development of CDS apps. Methods: We combined Change Management with a three-tier information technology architecture to stimulate CDS app development. Results: A Bridging Opportunities Work-frame model was developed. A test case was used to successfully develop an app. Conclusion: Healthcare providers can re-use this globally applicable model to actively create and manage regional decision support applications to translate evidence-based medicine in the use of emerging medication or novel treatment regimens. PMID:28031883

Cyberinfrastructure to Support Collaborative and Reproducible Computational Hydrologic Modeling

NASA Astrophysics Data System (ADS)

Goodall, J. L.; Castronova, A. M.; Bandaragoda, C.; Morsy, M. M.; Sadler, J. M.; Essawy, B.; Tarboton, D. G.; Malik, T.; Nijssen, B.; Clark, M. P.; Liu, Y.; Wang, S. W.

2017-12-01

Creating cyberinfrastructure to support reproducibility of computational hydrologic models is an important research challenge. Addressing this challenge requires open and reusable code and data with machine and human readable metadata, organized in ways that allow others to replicate results and verify published findings. Specific digital objects that must be tracked for reproducible computational hydrologic modeling include (1) raw initial datasets, (2) data processing scripts used to clean and organize the data, (3) processed model inputs, (4) model results, and (5) the model code with an itemization of all software dependencies and computational requirements. HydroShare is a cyberinfrastructure under active development designed to help users store, share, and publish digital research products in order to improve reproducibility in computational hydrology, with an architecture supporting hydrologic-specific resource metadata. Researchers can upload data required for modeling, add hydrology-specific metadata to these resources, and use the data directly within HydroShare.org for collaborative modeling using tools like CyberGIS, Sciunit-CLI, and JupyterHub that have been integrated with HydroShare to run models using notebooks, Docker containers, and cloud resources. Current research aims to implement the Structure For Unifying Multiple Modeling Alternatives (SUMMA) hydrologic model within HydroShare to support hypothesis-driven hydrologic modeling while also taking advantage of the HydroShare cyberinfrastructure. The goal of this integration is to create the cyberinfrastructure that supports hypothesis-driven model experimentation, education, and training efforts by lowering barriers to entry, reducing the time spent on informatics technology and software development, and supporting collaborative research within and across research groups.

Cognitive computing and eScience in health and life science research: artificial intelligence and obesity intervention programs.

PubMed

Marshall, Thomas; Champagne-Langabeer, Tiffiany; Castelli, Darla; Hoelscher, Deanna

2017-12-01

To present research models based on artificial intelligence and discuss the concept of cognitive computing and eScience as disruptive factors in health and life science research methodologies. The paper identifies big data as a catalyst to innovation and the development of artificial intelligence, presents a framework for computer-supported human problem solving and describes a transformation of research support models. This framework includes traditional computer support; federated cognition using machine learning and cognitive agents to augment human intelligence; and a semi-autonomous/autonomous cognitive model, based on deep machine learning, which supports eScience. The paper provides a forward view of the impact of artificial intelligence on our human-computer support and research methods in health and life science research. By augmenting or amplifying human task performance with artificial intelligence, cognitive computing and eScience research models are discussed as novel and innovative systems for developing more effective adaptive obesity intervention programs.

The Soft-Skills Learning Triangle: A Learning Model for Supporting Online Management & Leadership Development

ERIC Educational Resources Information Center

Adams, Jean

2010-01-01

The purpose of this paper is to present the Soft-skills Learning Triangle (SLT)--a model created to help coaches, mentors, and educators understand how web-technologies can be used to support management learning and soft-skills development. SLT emerged as part of a larger action-learning research project--the NewMindsets Management Education…

DEVELOPMENT OF AN URBAN FOOD LEADERSHIP COOP IN SUPPORT OF A LOCAL FOOD SYSTEM

EPA Science Inventory

A need shared by all communities is a clean environment that supports a sustainable food system and promotes human health. The current food system does not model environmental, social, or economic sustainability. Therefore, the challenge is to develop and support a new food ...

Navigating Schools Past the Technology On-Ramp.

ERIC Educational Resources Information Center

Wasser, Judith Davidson

1996-01-01

Discussion of how to support schools in the use of technology focuses on the Hanau Model Schools Partnership in Germany, supported by TERC and the National Science Foundation, that was developed to create broad technological access in schools and to support teachers in developing connections between the technology and the curriculum. (LRW)

A Model for Statewide Evaluation of a Universal Positive Behavior Support Initiative

ERIC Educational Resources Information Center

Elfner Childs, Karen; Kincaid, Don; George, Heather Peshak

2010-01-01

Several statewide evaluations of Tier 1/Universal Level Positive Behavior Support (PBS) implementation efforts have been conducted, adhering to the evaluation template developed by Horner, Sugai, and Lewis-Palmer in 2005. Building on these examples, Florida's Positive Behavior Support Project developed a comprehensive evaluation system that sought…

Models, Measurements, and Local Decisions: Assessing and ...

EPA Pesticide Factsheets

This presentation includes a combination of modeling and measurement results to characterize near-source air quality in Newark, New Jersey with consideration of how this information could be used to inform decision making to reduce risk of health impacts. Decisions could include either exposure or emissions reduction, and a host of stakeholders, including residents, academics, NGOs, local and federal agencies. This presentation includes results from the C-PORT modeling system, and from a citizen science project from the local area. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

WRF/CMAQ AQMEII3 Simulations of US Regional-Scale ...

EPA Pesticide Factsheets

Chemical boundary conditions are a key input to regional-scale photochemical models. In this study, performed during the third phase of the Air Quality Model Evaluation International Initiative (AQMEII3), we perform annual simulations over North America with chemical boundary conditions prepared from four different global models. Results indicate that the impacts of different boundary conditions are significant for ozone throughout the year and most pronounced outside the summer season. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

SELF (Supports for Early Learning Foundations): A Non-Directed Model Demonstration Project. Final Report.

ERIC Educational Resources Information Center

Harrison, Holly

This final report describes achievements and activities of Project SELF (Supports for Early Learning Foundations), a federally funded project in New Mexico which developed, evaluated, and replicated an innovative model that provides strategies for early interventionists and families to support early learning foundations. The project identified…

Hospital nurses' wellbeing at work: a theoretical model.

PubMed

Utriainen, Kati; Ala-Mursula, Leena; Kyngäs, Helvi

2015-09-01

To develop a theoretical model of hospital nurses' wellbeing at work. The concept of wellbeing at work is presented without an exact definition and without considering different contents. A model was developed in a deductive manner and empirical data collected from nurses (n = 233) working in a university hospital. Explorative factor analysis was used. The main concepts were: patients' experience of high-quality care; assistance and support among nurses; nurses' togetherness and cooperation; fluent practical organisation of work; challenging and meaningful work; freedom to express diverse feelings in the work community; well-conducted everyday nursing; status related to the work itself; fair and supportive leadership; opportunities for professional development; fluent communication with other professionals; and being together with other nurses in an informal way. Themes included: collegial relationships; enhancing high-quality patient care; supportive and fair leadership; challenging, meaningful and well organised work; and opportunities for professional development. Object-dependent wellbeing was supported. Managers should focus on strengthening the positive aspect of wellbeing at work, focusing on providing fluently organised work practices, fair and supportive leadership and togetherness while allowing nurses to implement their own ideas and promote the experience of meaningfulness. © 2014 John Wiley & Sons Ltd.

A Five- Year CMAQ Model Performance for Wildfires and ...

EPA Pesticide Factsheets

Biomass burning has been identified as an important contributor to the degradation of air quality because of its impact on ozone and particulate matter. Two components of the biomass burning inventory, wildfires and prescribed fires are routinely estimated in the national emissions inventory. However, there is a large amount of uncertainty in the development of these emission inventory sectors. We have completed a 5 year set of CMAQ model simulations (2008-2012) in which we have simulated regional air quality with and without the wildfire and prescribed fire inventory. We will examine CMAQ model performance over regions with significant PM2.5 and Ozone contribution from prescribed fires and wildfires. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

Yield Model Development (YMD) implementation plan for fiscal years 1981 and 1982

NASA Technical Reports Server (NTRS)

Ambroziak, R. A. (Principal Investigator)

1981-01-01

A plan is described for supporting USDA crop production forecasting and estimation by (1) testing, evaluating, and selecting crop yield models for application testing; (2) identifying areas of feasible research for improvement of models; and (3) conducting research to modify existing models and to develop new crop yield assessment methods. Tasks to be performed for each of these efforts are described as well as for project management and support. The responsibilities of USDA, USDC, USDI, and NASA are delineated as well as problem areas to be addressed.

Pieces of the Puzzle: Tracking the Chemical Component of the ...

EPA Pesticide Factsheets

This presentation provides an overview of the risk assessment conducted at the U.S. EPA, as well as some research examples related to the exposome concept. This presentation also provides the recommendation of using two organizational and predictive frameworks for tracking chemical components in the exposome. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

Development of cost-effective pavement treatment selection and treatment performance models : research project capsule.

DOT National Transportation Integrated Search

2010-09-10

The overall goal of this study is to develop pavement treatment performance models in support of the : cost-effective selection of pavement treatment types, project boundaries, and time of treatment. The : development of the proposed models will be b...

NOAA Atmospheric Sciences Modeling Division support to the US Environmental Protection Agency

NASA Astrophysics Data System (ADS)

Poole-Kober, Evelyn M.; Viebrock, Herbert J.

1991-07-01

During FY-1990, the Atmospheric Sciences Modeling Division provided meteorological research and operational support to the U.S. Environmental Protection Agency. Basic meteorological operational support consisted of applying dispersion models and conducting dispersion studies and model evaluations. The primary research effort was the development and evaluation of air quality simulation models using numerical and physical techniques supported by field studies. Modeling emphasis was on the dispersion of photochemical oxidants and particulate matter on urban and regional scales, dispersion in complex terrain, and the transport, transformation, and deposition of acidic materials. Highlights included expansion of the Regional Acid Deposition Model/Engineering Model family to consist of the Tagged Species Engineering Model, the Non-Depleting Model, and the Sulfate Tracking Model; completion of the Acid-MODES field study; completion of the RADM2.1 evaluation; completion of the atmospheric processes section of the National Acid Precipitation Assessment Program 1990 Integrated Assessment; conduct of the first field study to examine the transport and entrainment processes of convective clouds; development of a Regional Oxidant Model-Urban Airshed Model interface program; conduct of an international sodar intercomparison experiment; incorporation of building wake dispersion in numerical models; conduct of wind-tunnel simulations of stack-tip downwash; and initiation of the publication of SCRAM NEWS.

Modelling and control of a rotor supported by magnetic bearings

NASA Technical Reports Server (NTRS)

Gurumoorthy, R.; Pradeep, A. K.

1994-01-01

In this paper we develop a dynamical model of a rotor and the active magnetic bearings used to support the rotor. We use this model to develop a stable state feedback control of the magnetic bearing system. We present the development of a rigid body model of the rotor, utilizing both Rotation Matrices (Euler Angles) and Euler Parameters (Quaternions). In the latter half of the paper we develop a stable state feedback control of the actively controlled magnetic bearing to control the rotor position under inbalances. The control law developed takes into account the variation of the model with rotational speed. We show stability over the whole operating range of speeds for the magnetic bearing system. Simulation results are presented to demonstrate the closed loop system performance. We develop the model of the magnetic bearing, and present two schemes for the excitation of the poles of the actively controlled magnetic bearing. We also present a scheme for averaging multiple sensor measurements and splitting the actuation forces amongst redundant actuators.

The Integrated Medical Model: A Decision Support Tool for In-flight Crew Health Care

NASA Technical Reports Server (NTRS)

Butler, Doug

2009-01-01

This viewgraph presentation reviews the development of an Integrated Medical Model (IMM) decision support tool for in-flight crew health care safety. Clinical methods, resources, and case scenarios are also addressed.

How do microclimate factors affect the risk for superficial pressure ulcers: a mathematical modeling study.

PubMed

Gefen, Amit

2011-08-01

In this study, a mathematical model is developed for analyzing the effects of the microclimate on skin tolerance to superficial pressure ulcers (SPUs). The modeling identified the following factors as such that decrease the tolerance of skin to SPUs: (i) increase in the skin temperature, (ii) increase in the ambient temperature, (iii) increase in the relative humidity, (iv) increase in the skin-support (or skin-clothing-support) contact pressures, and (v) decrease in permeabilities of the materials contacting the skin or being close to it, e.g. the covering sheet of the support and clothing. The modeling is consistent with relevant empirical findings and clinical observations documented in the literature, explains them from a basic science aspect, and can be further developed for design of interventions, safer patient clothing and supports that consider the optimization of microclimate factors. Copyright © 2010 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.

SN1987A: The Birth of a Supernova Remnant

NASA Technical Reports Server (NTRS)

McCray, Richard

2003-01-01

This grant was intended to support the development of theoretical models needed to interpret and understand the observations by the Hubble Space Telescope and the Chandra X-ray telescope of the rapidly developing remnant of Supernova 1987A. In addition, we carried out a few investigations of related topics. The project was spectacularly successful. The models that we developed provide the definitive framework for predicting and interpreting this phenomenon. Following is a list of publications based on our work. Some of these papers include results of both theoretical modeling supported by this project and also analysis of data supported by the Space Telescope Science Institute and the Chandra X-ray Observatory. We first list papers published in refereed journals, then conference proceedings and book chapters, and also an educational web site.

Modeling of Local BEAM Structure for Evaluation of MMOD Impacts to Support Development of a Health Monitoring System

NASA Technical Reports Server (NTRS)

Lyle, Karen H.; Vassilakos, Gregory J.

2015-01-01

This report summarizes initial modeling of the local response of the Bigelow Expandable Activity Module (BEAM) to micrometeorite and orbital debris (MMOD) impacts using a structural, non-linear, transient dynamic finite element code. Complementary test results for a local BEAM structure are presented for both hammer and projectile impacts. Review of these data provided guidance for the transient dynamic model development. The local model is intended to support predictions using the global BEAM model, described in a companion report. Two types of local models were developed. One mimics the simplified Soft-Goods (fabric envelop) part of the BEAM NASTRAN model delivered by the project. The second investigates through-the-thickness modeling challenges for MMOD-type impacts. Both the testing and the analysis summaries contain lessons learned and areas for future efforts.

Experiences in Teaching a Graduate Course on Model-Driven Software Development

ERIC Educational Resources Information Center

Tekinerdogan, Bedir

2011-01-01

Model-driven software development (MDSD) aims to support the development and evolution of software intensive systems using the basic concepts of model, metamodel, and model transformation. In parallel with the ongoing academic research, MDSD is more and more applied in industrial practices. After being accepted both by a broad community of…

Alternative model for administration and analysis of research-based assessments

NASA Astrophysics Data System (ADS)

Wilcox, Bethany R.; Zwickl, Benjamin M.; Hobbs, Robert D.; Aiken, John M.; Welch, Nathan M.; Lewandowski, H. J.

2016-06-01

Research-based assessments represent a valuable tool for both instructors and researchers interested in improving undergraduate physics education. However, the historical model for disseminating and propagating conceptual and attitudinal assessments developed by the physics education research (PER) community has not resulted in widespread adoption of these assessments within the broader community of physics instructors. Within this historical model, assessment developers create high quality, validated assessments, make them available for a wide range of instructors to use, and provide minimal (if any) support to assist with administration or analysis of the results. Here, we present and discuss an alternative model for assessment dissemination, which is characterized by centralized data collection and analysis. This model provides a greater degree of support for both researchers and instructors in order to more explicitly support adoption of research-based assessments. Specifically, we describe our experiences developing a centralized, automated system for an attitudinal assessment we previously created to examine students' epistemologies and expectations about experimental physics. This system provides a proof of concept that we use to discuss the advantages associated with centralized administration and data collection for research-based assessments in PER. We also discuss the challenges that we encountered while developing, maintaining, and automating this system. Ultimately, we argue that centralized administration and data collection for standardized assessments is a viable and potentially advantageous alternative to the default model characterized by decentralized administration and analysis. Moreover, with the help of online administration and automation, this model can support the long-term sustainability of centralized assessment systems.

Plug-and -Play Model Architecture and Development Environment for Powertrain/Propulsion System - Final CRADA Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rousseau, Aymeric

2013-02-01

Several tools already exist to develop detailed plant model, including GT-Power, AMESim, CarSim, and SimScape. The objective of Autonomie is not to provide a language to develop detailed models; rather, Autonomie supports the assembly and use of models from design to simulation to analysis with complete plug-and-play capabilities. Autonomie provides a plug-and-play architecture to support this ideal use of modeling and simulation for math-based automotive control system design. Models in the standard format create building blocks, which are assembled at runtime into a simulation model of a vehicle, system, subsystem, or component to simulate. All parts of the graphical usermore » interface (GUI) are designed to be flexible to support architectures, systems, components, and processes not yet envisioned. This allows the software to be molded to individual uses, so it can grow as requirements and technical knowledge expands. This flexibility also allows for implementation of legacy code, including models, controller code, processes, drive cycles, and post-processing equations. A library of useful and tested models and processes is included as part of the software package to support a full range of simulation and analysis tasks, immediately. Autonomie also includes a configuration and database management front end to facilitate the storage, versioning, and maintenance of all required files, such as the models themselves, the model’s supporting files, test data, and reports. During the duration of the CRADA, Argonne has worked closely with GM to implement and demonstrate each one of their requirements. A use case was developed by GM for every requirement and demonstrated by Argonne. Each of the new features were verified by GM experts through a series of Gate. Once all the requirements were validated they were presented to the directors as part of GM Gate process.« less

Conceptual FOM design tool

NASA Astrophysics Data System (ADS)

Krause, Lee S.; Burns, Carla L.

2000-06-01

This paper discusses the research currently in progress to develop the Conceptual Federation Object Model Design Tool. The objective of the Conceptual FOM (C-FOM) Design Tool effort is to provide domain and subject matter experts, such as scenario developers, with automated support for understanding and utilizing available HLA simulation and other simulation assets during HLA Federation development. The C-FOM Design Tool will import Simulation Object Models from HLA reuse repositories, such as the MSSR, to populate the domain space that will contain all the objects and their supported interactions. In addition, the C-FOM tool will support the conversion of non-HLA legacy models into HLA- compliant models by applying proven abstraction techniques against the legacy models. Domain experts will be able to build scenarios based on the domain objects and interactions in both a text and graphical form and export a minimal FOM. The ability for domain and subject matter experts to effectively access HLA and non-HLA assets is critical to the long-term acceptance of the HLA initiative.

Global 3-D Modeling Studies Of Tropospheric Ozone And Related Gases

NASA Technical Reports Server (NTRS)

Jacob, Daniel J.; Logan, Jennifer A.

2003-01-01

Our research was targeted at three issues: (1) the factors controlling ozone in the tropical troposphere, (2) the Asian outflow of ozone and its precursors, and (3) the causes of decadal trends observed in ozone and CO. We have also used support from this ACMAP grant to (1) work with Kelly Chance on the retrieval and interpretation of HCHO and NO2 observations from GOME, and (2) develop GEOS-CHEM into a versatile model supporting the work of a large number of users including outside Harvard. ACMAP has provided the core support for GEOS-CHEM development. Applications of the GEOS-CHEM model with primary support from ACMAP are discussed below. A list of publications resulting from this grant is given at the end of the report.

Generic domain models in software engineering

NASA Technical Reports Server (NTRS)

Maiden, Neil

1992-01-01

This paper outlines three research directions related to domain-specific software development: (1) reuse of generic models for domain-specific software development; (2) empirical evidence to determine these generic models, namely elicitation of mental knowledge schema possessed by expert software developers; and (3) exploitation of generic domain models to assist modelling of specific applications. It focuses on knowledge acquisition for domain-specific software development, with emphasis on tool support for the most important phases of software development.

Applying Service-Oriented Architecture on The Development of Groundwater Modeling Support System

NASA Astrophysics Data System (ADS)

Li, C. Y.; WANG, Y.; Chang, L. C.; Tsai, J. P.; Hsiao, C. T.

2016-12-01

Groundwater simulation has become an essential step on the groundwater resources management and assessment. There are many stand-alone pre- and post-processing software packages to alleviate the model simulation loading, but the stand-alone software do not consider centralized management of data and simulation results neither do they provide network sharing functions. Hence, it is difficult to share and reuse the data and knowledge (simulation cases) systematically within or across companies. Therefore, this study develops a centralized and network based groundwater modeling support system to assist model construction. The system is based on service-oriented architecture and allows remote user to develop their modeling cases on internet. The data and cases (knowledge) are thus easy to manage centralized. MODFLOW is the modeling engine of the system, which is the most popular groundwater model in the world. The system provides a data warehouse to restore groundwater observations, MODFLOW Support Service, MODFLOW Input File & Shapefile Convert Service, MODFLOW Service, and Expert System Service to assist researchers to build models. Since the system architecture is service-oriented, it is scalable and flexible. The system can be easily extended to include the scenarios analysis and knowledge management to facilitate the reuse of groundwater modeling knowledge.

PODIO: An Event-Data-Model Toolkit for High Energy Physics Experiments

NASA Astrophysics Data System (ADS)

Gaede, F.; Hegner, B.; Mato, P.

2017-10-01

PODIO is a C++ library that supports the automatic creation of event data models (EDMs) and efficient I/O code for HEP experiments. It is developed as a new EDM Toolkit for future particle physics experiments in the context of the AIDA2020 EU programme. Experience from LHC and the linear collider community shows that existing solutions partly suffer from overly complex data models with deep object-hierarchies or unfavorable I/O performance. The PODIO project was created in order to address these problems. PODIO is based on the idea of employing plain-old-data (POD) data structures wherever possible, while avoiding deep object-hierarchies and virtual inheritance. At the same time it provides the necessary high-level interface towards the developer physicist, such as the support for inter-object relations and automatic memory-management, as well as a Python interface. To simplify the creation of efficient data models PODIO employs code generation from a simple yaml-based markup language. In addition, it was developed with concurrency in mind in order to support the use of modern CPU features, for example giving basic support for vectorization techniques.

Software and mathematical support of Kazakhstani star tracker

NASA Astrophysics Data System (ADS)

Akhmedov, D.; Yelubayev, S.; Ten, V.; Bopeyev, T.; Alipbayev, K.; Sukhenko, A.

2016-10-01

Currently the specialists of Kazakhstan have been developing the star tracker that is further planned to use on Kazakhstani satellites of various purposes. At the first stage it has been developed the experimental model of star tracker that has following characteristics: field of view 20°, update frequency 2 Hz, exclusion angle 40°, accuracy of attitude determination of optical axis/around optical axis 15/50 arcsec. Software and mathematical support are the most high technology parts of star tracker. The results of software and mathematical support development of experimental model of Kazakhstani star tracker are represented in this article. In particular, there are described the main mathematical models and algorithms that have been used as a basis for program units of preliminary image processing of starry sky, stars identification and star tracker attitude determination. The results of software and mathematical support testing with the help of program simulation complex using various configurations of defects including image sensor noises, point spread function modeling, optical system distortion up to 2% are presented. Analysis of testing results has shown that accuracy of attitude determination of star tracker is within the permissible range

Modeling social reintegration in persons with spinal cord injury.

PubMed

Song, Hee-Young

2005-02-04

This study was undertaken to identify and develop a model of the factors related to social reintegration in persons with spinal cord injury (SCI). A convenience sample of 145 persons with SCI living in two cities in South Korea anonymously completed a questionnaire that comprised the assessment of social reintegration, a tool developed to measure the degree of adjustment to community living in persons with SCI. Structural equation modeling was used to examine the direct and indirect effects of self-esteem, social barriers, physical function, family support, informational support, perceived stress, emotion-focused coping (EFC), and problem-focused coping (PFC) on social reintegration. The model explained 65% of the variance in social reintegration in persons with SCI. The results indicated that the social integration of persons with SCI was influenced most by EFC. Family support, informational support, perceived stress and social barriers were also significantly related to social reintegration. These findings suggest implications for developing the interventions at various levels including family and community and specific to individual coping strategies to enhance social reintegration in persons with SCI.

Toolkit of Available EPA Green Infrastructure Modeling ...

EPA Pesticide Factsheets

This webinar will present a toolkit consisting of five EPA green infrastructure models and tools, along with communication material. This toolkit can be used as a teaching and quick reference resource for use by planners and developers when making green infrastructure implementation decisions. It can also be used for low impact development design competitions. Models and tools included: Green Infrastructure Wizard (GIWiz), Watershed Management Optimization Support Tool (WMOST), Visualizing Ecosystem Land Management Assessments (VELMA) Model, Storm Water Management Model (SWMM), and the National Stormwater Calculator (SWC). This webinar will present a toolkit consisting of five EPA green infrastructure models and tools, along with communication material. This toolkit can be used as a teaching and quick reference resource for use by planners and developers when making green infrastructure implementation decisions. It can also be used for low impact development design competitions. Models and tools included: Green Infrastructure Wizard (GIWiz), Watershed Management Optimization Support Tool (WMOST), Visualizing Ecosystem Land Management Assessments (VELMA) Model, Storm Water Management Model (SWMM), and the National Stormwater Calculator (SWC).

Influence of backup bearings and support structure dynamics on the behavior of rotors with active supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1994-01-01

Progress over the past year includes the following: A simplified rotor model with a flexible shaft and backup bearings has been developed. A simple rotor model which includes a flexible disk and bearings with clearance has been developed and the dynamics of the model investigated. A rotor model based upon the T-501 engine has been developed which includes backup bearing effects. Parallel simulation runs are being conducted using an ANSYS based finite element model of the T-501. The magnetic bearing test rig is currently floating and dynamics/control tests are being conducted. A paper has been written that documents the work using the T-501 engine model. Work has continued with the simplified model. The finite element model is currently being modified to include the effects of foundation dynamics. A literature search for material on foil bearings has been conducted. A finite element model is being developed for a magnetic bearing in series with a foil backup bearing.

Development of a model of dementia support and pathway for culturally and linguistically diverse communities using co-creation and participatory action research

PubMed Central

Goeman, Dianne; King, Jordan; Koch, Susan

2016-01-01

Objective To develop an inclusive model of culturally sensitive support, using a specialist dementia nurse (SDN), to assist people with dementia from culturally and linguistically diverse (CALD) communities and their carers to overcome barriers to accessing health and social care services. Design Co-creation and participatory action research, based on reflection, data collection, interaction and feedback from participants and stakeholders. Setting An SDN support model embedded within a home nursing service in Melbourne, Australia was implemented between October 2013 and October 2015. Participants People experiencing memory loss or with a diagnosis of dementia from CALD backgrounds and their carers and family living in the community setting and expert stakeholders. Data collection and analysis Reflections from the SDN on interactions with participants and expert stakeholder opinion informed the CALD dementia support model and pathway. Results Interaction with 62 people living with memory loss or dementia from CALD backgrounds, carers or family members receiving support from the SDN and feedback from 13 expert stakeholders from community aged-care services, consumer advocacy organisations and ethnic community group representatives informed the development and refinement of the CALD dementia model of care and pathway. We delineate the three components of the ‘SDN’ model: the organisational support; a description of the role; and the competencies needed. Additionally, we provide an accompanying pathway for use by health professionals delivering care to consumers with dementia from CALD backgrounds. Conclusions Our culturally sensitive model of dementia care and accompanying pathway allows for the tailoring of health and social support to assist people from CALD backgrounds, their carers and families to adjust to living with memory loss and remain living in the community as long as possible. The model and accompanying pathway also have the potential to be rolled out nationally for use by health professionals across a variety of health services. PMID:27927662

Operational modes, health, and status monitoring

NASA Astrophysics Data System (ADS)

Taljaard, Corrie

2016-08-01

System Engineers must fully understand the system, its support system and operational environment to optimise the design. Operations and Support Managers must also identify the correct metrics to measure the performance and to manage the operations and support organisation. Reliability Engineering and Support Analysis provide methods to design a Support System and to optimise the Availability of a complex system. Availability modelling and Failure Analysis during the design is intended to influence the design and to develop an optimum maintenance plan for a system. The remote site locations of the SKA Telescopes place emphasis on availability, failure identification and fault isolation. This paper discusses the use of Failure Analysis and a Support Database to design a Support and Maintenance plan for the SKA Telescopes. It also describes the use of modelling to develop an availability dashboard and performance metrics.

Advanced Life Support Research and Technology Development

NASA Technical Reports Server (NTRS)

Kliss, Mark

2001-01-01

A videograph outlining life support research. The Human Exploration and Development of Space (HEDS) Enterprise's goals are to provide life support self-sufficiency for human beings to carry out research and exploration productively in space, to open the door for planetary exploration, and for benefits on Earth. Topics presented include the role of NASA Ames, funding, and technical monitoring. The focused research areas discussed include air regeneration, carbon dioxide removal, Mars Life Support, water recovery, Vapor Phase Catalytic Ammonia Removal (VPCAR), solid waste treatment, and Supercritical Water Oxidation (SCWC). Focus is placed on the utilization of Systems Integration, Modeling and Analysis (SIMA) and Dynamic Systems Modeling in this research.

Model-Driven Theme/UML

NASA Astrophysics Data System (ADS)

Carton, Andrew; Driver, Cormac; Jackson, Andrew; Clarke, Siobhán

Theme/UML is an existing approach to aspect-oriented modelling that supports the modularisation and composition of concerns, including crosscutting ones, in design. To date, its lack of integration with model-driven engineering (MDE) techniques has limited its benefits across the development lifecycle. Here, we describe our work on facilitating the use of Theme/UML as part of an MDE process. We have developed a transformation tool that adopts model-driven architecture (MDA) standards. It defines a concern composition mechanism, implemented as a model transformation, to support the enhanced modularisation features of Theme/UML. We evaluate our approach by applying it to the development of mobile, context-aware applications-an application area characterised by many non-functional requirements that manifest themselves as crosscutting concerns.

Radar Detection Models in Computer Supported Naval War Games

DTIC Science & Technology

1979-06-08

revealed a requirement for the effective centralized manage- ment of computer supported war game development and employment in the U.S. Navy. A...considerations and supports the requirement for centralized Io 97 management of computerized war game development . Therefore it is recommended that a central...managerial and fiscal authority be estab- lished for computerized tactical war game development . This central authority should ensure that new games

Analysis of an algae-based CELSS. I - Model development

NASA Technical Reports Server (NTRS)

Holtzapple, Mark T.; Little, Frank E.; Makela, Merry E.; Patterson, C. O.

1989-01-01

A steady state chemical model and computer program have been developed for a life support system and applied to trade-off studies. The model is based on human demand for food and oxygen determined from crew metabolic needs. The model includes modules for water recycle, waste treatment, CO2 removal and treatment, and food production. The computer program calculates rates of use and material balance for food, O2, the recycle of human waste and trash, H2O, N2, and food production/supply. A simple noniterative solution for the model has been developed using the steady state rate equations for the chemical reactions. The model and program have been used in system sizing and subsystem trade-off studies of a partially closed life support system.

Analysis of an algae-based CELSS. Part 1: model development

NASA Technical Reports Server (NTRS)

Holtzapple, M. T.; Little, F. E.; Makela, M. E.; Patterson, C. O.

1989-01-01

A steady state chemical model and computer program have been developed for a life support system and applied to trade-off studies. The model is based on human demand for food and oxygen determined from crew metabolic needs. The model includes modules for water recycle, waste treatment, CO2 removal and treatment, and food production. The computer program calculates rates of use and material balance for food. O2, the recycle of human waste and trash, H2O, N2, and food production supply. A simple non-iterative solution for the model has been developed using the steady state rate equations for the chemical reactions. The model and program have been used in system sizing and subsystem trade-off studies of a partially closed life support system.

Families First: the development of a new mentalization-based group intervention for first-time parents to promote child development and family health.

PubMed

Kalland, Mirjam; Fagerlund, Åse; von Koskull, Malin; Pajulo, Marjaterttu

2016-01-01

The aim of the present study was to describe the development of Families First, a new mentalization-based group intervention model for supporting early parenthood. The general aim of the intervention was to support well-functioning models of parenting and prevent transmission of negative parenting models over generations, and thus promote child development and overall family health. In the Finnish society, great concern has aroused during the last decade regarding the well-being and mental health of children and adolescents. Increased number of divorces, poverty, substance abuse, and mental health problems among parents enhance the risk for child neglect and abuse. New effective, preventive, and health-promoting intervention tools are greatly needed to support families with young children. At present, the Families First intervention is being implemented in primary social and healthcare units all over Finland. This article will provide a theoretical understanding of the importance of parental mentalization for the development of the parent-child relationship and the development of the child as well as proposed mechanisms of actions in order to enhance mentalizing capacity. The cultural context will be described. The article will also provide a description of the scientific evaluation protocol of the intervention model. Finally, possible limitations and challenges of the intervention model are discussed.

A LANGUAGE FOR MODULAR SPATIO-TEMPORAL SIMULATION (R824766)

EPA Science Inventory

Creating an effective environment for collaborative spatio-temporal model development will require computational systems that provide support for the user in three key areas: (1) Support for modular, hierarchical model construction and archiving/linking of simulation modules; (2)...

A Decision Model for Supporting Task Allocation Processes in Global Software Development

NASA Astrophysics Data System (ADS)

Lamersdorf, Ansgar; Münch, Jürgen; Rombach, Dieter

Today, software-intensive systems are increasingly being developed in a globally distributed way. However, besides its benefit, global development also bears a set of risks and problems. One critical factor for successful project management of distributed software development is the allocation of tasks to sites, as this is assumed to have a major influence on the benefits and risks. We introduce a model that aims at improving management processes in globally distributed projects by giving decision support for task allocation that systematically regards multiple criteria. The criteria and causal relationships were identified in a literature study and refined in a qualitative interview study. The model uses existing approaches from distributed systems and statistical modeling. The article gives an overview of the problem and related work, introduces the empirical and theoretical foundations of the model, and shows the use of the model in an example scenario.

Fuzzy support vector machine: an efficient rule-based classification technique for microarrays.

PubMed

Hajiloo, Mohsen; Rabiee, Hamid R; Anooshahpour, Mahdi

2013-01-01

The abundance of gene expression microarray data has led to the development of machine learning algorithms applicable for tackling disease diagnosis, disease prognosis, and treatment selection problems. However, these algorithms often produce classifiers with weaknesses in terms of accuracy, robustness, and interpretability. This paper introduces fuzzy support vector machine which is a learning algorithm based on combination of fuzzy classifiers and kernel machines for microarray classification. Experimental results on public leukemia, prostate, and colon cancer datasets show that fuzzy support vector machine applied in combination with filter or wrapper feature selection methods develops a robust model with higher accuracy than the conventional microarray classification models such as support vector machine, artificial neural network, decision trees, k nearest neighbors, and diagonal linear discriminant analysis. Furthermore, the interpretable rule-base inferred from fuzzy support vector machine helps extracting biological knowledge from microarray data. Fuzzy support vector machine as a new classification model with high generalization power, robustness, and good interpretability seems to be a promising tool for gene expression microarray classification.

Influence of backup bearings and support structure dynamics on the behavior of rotors with active supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1994-01-01

Substantial progress has been made toward the goals of this research effort in the past six months. A simplified rotor model with a flexible shaft and backup bearings has been developed. The model is based upon the work of Ishii and Kirk. Parameter studies of the behavior of this model are currently being conducted. A simple rotor model which includes a flexible disk and bearings with clearance has been developed and the dynamics of the model investigated. The study consists of simulation work coupled with experimental verification. The work is documented in the attached paper. A rotor model based upon the T-501 engine has been developed which includes backup bearing effects. The dynamics of this model are currently being studied with the objective of verifying the conclusions obtained from the simpler models. Parallel simulation runs are being conducted using an ANSYS based finite element model of the T-501.

Process Improvement Should Link to Security: SEPG 2007 Security Track Recap

DTIC Science & Technology

2007-09-01

the Systems Security Engineering Capability Maturity Model (SSE- CMM / ISO 21827) and its use in system software developments ...software development life cycle ( SDLC )? 6. In what ways should process improvement support security in the SDLC ? 1.2 10BPANEL RESOURCES For each... project management, and support practices through the use of the capability maturity models including the CMMI and the Systems Security

A prototype knowledge-based decision support system for industrial waste management. Part 1: The decision support system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyle, C.A.; Baetz, B.W.

1998-12-31

Although there are a number of expert systems available which are designed to assist in resolving environmental problems, there is still a need for a system which would assist managers in determining waste management options for all types of wastes from one or more industrial plants, giving priority to sustainable use of resources, reuse and recycling. A prototype model was developed to determine the potentials for reuse and recycling of waste materials, to select the treatments needed to recycle waste materials or for treatment before disposal, and to determine potentials for co-treatment of wastes. A knowledge-based decision support system wasmore » then designed using this model. This paper describes the prototype model, the developed knowledge-based decision support system, the input and storage of data within the system and the inference engine developed for the system to determine the treatment options for the wastes. Options for sorting and selecting treatment trains are described, along with a discussion of the limitations of the approach and future developments needed for the system.« less

Evaluating the State of Water Management in the Rio Grande/Bravo Basin

NASA Astrophysics Data System (ADS)

Ortiz Partida, Jose Pablo; Sandoval-Solis, Samuel; Diaz Gomez, Romina

2017-04-01

Water resource modeling tools have been developed for many different regions and sub-basins of the Rio Grande/Bravo (RGB). Each of these tools has specific objectives, whether it is to explore drought mitigation alternatives, conflict resolution, climate change evaluation, tradeoff and economic synergies, water allocation, reservoir operations, or collaborative planning. However, there has not been an effort to integrate different available tools, or to link models developed for specific reaches into a more holistic watershed decision-support tool. This project outlines promising next steps to meet long-term goals of improved decision support tools and modeling. We identify, describe, and synthesize water resources management practices in the RGB basin and available water resources models and decision support tools that represent the RGB and the distribution of water for human and environmental uses. The extent body of water resources modeling is examined from a perspective of environmental water needs and water resources management and thereby allows subsequent prioritization of future research and monitoring needs for the development of river system modeling tools. This work communicates the state of the RGB science to diverse stakeholders, researchers, and decision-makers. The products of this project represent a planning tool to support an integrated water resources management framework to maximize economic and social welfare without compromising vital ecosystems.

Expanded resources through utilization of a primary care giver extracorporeal membrane oxygenation model.

PubMed

Freeman, Regi; Nault, Chrissy; Mowry, Jole'; Baldridge, Paula

2012-01-01

Extracorporeal membrane oxygenation (ECMO) is a long-term extracorporeal support for critically ill patients with life-threatening compromises in cardiac and/or respiratory function. The unpredictability of ECMO resources for a large pediatric and adult population prompted a need for the ability to respond to significant fluctuations in the volume of patients on ECMO. Through multidisciplinary collaboration, the Primary Care Giver (PCG) ECMO Staffing Model was developed to accommodate unpredictable fluctuations in ECMO activity and to maintain flexibility and fiscal responsibility in turbulent economic times. Advancements in extracorporeal technology supported the opportunity to develop a safe and extended staffing model for ECMO. Combining the use of a centrifugal pump system with specialized and experienced cardiovascular intensive care nurses and the ECMO specialist team provided a milieu for education and training to support the new staffing model. The PCG ECMO model provides a safe, flexible, and fiscally responsible staffing model for variable ECMO activity.

Circles of Care: Development and Initial Evaluation of a Peer Support Model for African Americans with Advanced Cancer

ERIC Educational Resources Information Center

Hanson, Laura C.; Armstrong, Tonya D.; Green, Melissa A.; Hayes, Michelle; Peacock, Stacie; Elliot-Bynum, Sharon; Goldmon, Moses V.; Corbie-Smith, Giselle; Earp, Jo Anne

2013-01-01

Peer support interventions extend care and health information to underserved populations yet rarely address serious illness. Investigators from a well-defined academic-community partnership developed and evaluated a peer support intervention for African Americans facing advanced cancer. Evaluation methods used the Reach, Efficacy, Adoption,…

Overview of EPA tools for supporting local-, state- and regional-level decision makers addressing energy and environmental issues: NYC MARKAL Energy Systems Model and Municipal Solid Waste Decision Support Tool

EPA Science Inventory

A workshop will be conducted to demonstrate and focus on two decision support tools developed at EPA/ORD: 1. Community-scale MARKAL model: an energy-water technology evaluation tool and 2. Municipal Solid Waste Decision Support Tool (MSW DST). The Workshop will be part of Southea...

The Self-Esteem, Perceived Social Support and Hopelessness in Adolescents: The Structural Equation Modeling

ERIC Educational Resources Information Center

Savi Cakar, Firdevs; Karatas, Zeynep

2012-01-01

In this study, a developed model to explain a causal relationship between adolescent's self-esteem, perceived social support and hopelessness is tested. The purpose of the study is to explore the relationship between self-esteem, perceived social support and hopelessness in adolescents. A total of 257 adolescents, including 143 female and 114…

The Development of Statistics Textbook Supported with ICT and Portfolio-Based Assessment

NASA Astrophysics Data System (ADS)

Hendikawati, Putriaji; Yuni Arini, Florentina

2016-02-01

This research was development research that aimed to develop and produce a Statistics textbook model that supported with information and communication technology (ICT) and Portfolio-Based Assessment. This book was designed for students of mathematics at the college to improve students’ ability in mathematical connection and communication. There were three stages in this research i.e. define, design, and develop. The textbooks consisted of 10 chapters which each chapter contains introduction, core materials and include examples and exercises. The textbook developed phase begins with the early stages of designed the book (draft 1) which then validated by experts. Revision of draft 1 produced draft 2 which then limited test for readability test book. Furthermore, revision of draft 2 produced textbook draft 3 which simulated on a small sample to produce a valid model textbook. The data were analysed with descriptive statistics. The analysis showed that the Statistics textbook model that supported with ICT and Portfolio-Based Assessment valid and fill up the criteria of practicality.

Treatment of CELSS and PCELSS waste to produce nutrients for plant growth. [Controlled Ecological Life Support Systems and Partially Controlled Ecological Life Support Systems

NASA Technical Reports Server (NTRS)

Modell, M.; Meissner, H.; Karel, M.; Carden, J.; Lewis, S.

1981-01-01

The research program entitled 'Development of a Prototype Experiment for Treating CELSS (Controlled Ecological Life Support Systems) and PCELSS (Partially Controlled Ecological Life Support Systems) Wastes to Produce Nutrients for Plant Growth' consists of two phases: (1) the development of the neccessary facilities, chemical methodologies and models for meaningful experimentation, and (2) the application of what methods and devices are developed to the interfacing of waste oxidation with plant growth. Homogeneous samples of freeze-dried human feces and urine have been prepared to ensure comparability of test results between CELSS waste treatment research groups. A model of PCELSS food processing wastes has been developed, and an automated gas chromatographic system to analyze oxidizer effluents was designed and brought to operational status. Attention is given the component configuration of the wet oxidation system used by the studies.

Projected 2050 Model Simulations for the Chesapeake Bay ...

EPA Pesticide Factsheets

The Chesapeake Bay Program as has been tasked with assessing how changes in climate systems are expected to alter key variables and processes within the Watershed in concurrence with land use changes. EPA’s Office of Research and Development will be conducting historic and future, 2050, Weather Research and Forecast (WRF) metrological and Community Multiscale Air Quality (CMAQ) chemical transport model simulations to provide meteorological and nutrient deposition estimates for inclusion of the Chesapeake Bay Program’s assessment of how climate and land use change may impact water quality and ecosystem health. This presentation will present the timeline and research updates. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

A large scale GIS geodatabase of soil parameters supporting the modeling of conservation practice alternatives in the United States

USDA-ARS?s Scientific Manuscript database

Water quality modeling requires across-scale support of combined digital soil elements and simulation parameters. This paper presents the unprecedented development of a large spatial scale (1:250,000) ArcGIS geodatabase coverage designed as a functional repository of soil-parameters for modeling an...

Collaborative modelling and integrated decision support system analysis of a developed terminal lake basin

USGS Publications Warehouse

Niswonger, Richard G.; Allander, Kip K.; Jeton, Anne E.

2014-01-01

A terminal lake basin in west-central Nevada, Walker Lake, has undergone drastic change over the past 90 yrs due to upstream water use for agriculture. Decreased inflows to the lake have resulted in 100 km2 decrease in lake surface area and a total loss of fisheries due to salinization. The ecologic health of Walker Lake is of great concern as the lake is a stopover point on the Pacific route for migratory birds from within and outside the United States. Stakeholders, water institutions, and scientists have engaged in collaborative modeling and the development of a decision support system that is being used to develop and analyze management change options to restore the lake. Here we use an integrated management and hydrologic model that relies on state-of-the-art simulation capabilities to evaluate the benefits of using integrated hydrologic models as components of a decision support system. Nonlinear feedbacks among climate, surface-water and groundwater exchanges, and water use present challenges for simulating realistic outcomes associated with management change. Integrated management and hydrologic modeling provides a means of simulating benefits associated with management change in the Walker River basin where drastic changes in the hydrologic landscape have taken place over the last century. Through the collaborative modeling process, stakeholder support is increasing and possibly leading to management change options that result in reductions in Walker Lake salt concentrations, as simulated by the decision support system.

Design and Implementation of an Intelligent Cost Estimation Model for Decision Support System Software

DTIC Science & Technology

1990-09-01

following two chapters. 28 V. COCOMO MODEL A. OVERVIEW The COCOMO model which stands for COnstructive COst MOdel was developed by Barry Boehm and is...estimation model which uses an expert system to automate the Intermediate COnstructive Cost Estimation MOdel (COCOMO), developed by Barry W. Boehm and...cost estimation model which uses an expert system to automate the Intermediate COnstructive Cost Estimation MOdel (COCOMO), developed by Barry W

An approach to developing user interfaces for space systems

NASA Astrophysics Data System (ADS)

Shackelford, Keith; McKinney, Karen

1993-08-01

Inherent weakness in the traditional waterfall model of software development has led to the definition of the spiral model. The spiral model software development lifecycle model, however, has not been applied to NASA projects. This paper describes its use in developing real time user interface software for an Environmental Control and Life Support System (ECLSS) Process Control Prototype at NASA's Marshall Space Flight Center.

Linking the Leadership Identity Development Model to Collegiate Recreation and Athletics.

PubMed

Hall, Stacey L

2015-01-01

The Leadership Identity Development (LID) Model (Komives, Owen, Longerbeam, Mainella, & Osteen, 2005) provides a stage leadership development model for college students that can be applied to collegiate recreation student staff, volunteers, participants, and varsity student-athletes. This chapter provides guidance to implement the model in these settings and to create environments that support development. © 2015 Wiley Periodicals, Inc., A Wiley Company.

A Framework to Manage Information Models

NASA Astrophysics Data System (ADS)

Hughes, J. S.; King, T.; Crichton, D.; Walker, R.; Roberts, A.; Thieman, J.

2008-05-01

The Information Model is the foundation on which an Information System is built. It defines the entities to be processed, their attributes, and the relationships that add meaning. The development and subsequent management of the Information Model is the single most significant factor for the development of a successful information system. A framework of tools has been developed that supports the management of an information model with the rigor typically afforded to software development. This framework provides for evolutionary and collaborative development independent of system implementation choices. Once captured, the modeling information can be exported to common languages for the generation of documentation, application databases, and software code that supports both traditional and semantic web applications. This framework is being successfully used for several science information modeling projects including those for the Planetary Data System (PDS), the International Planetary Data Alliance (IPDA), the National Cancer Institute's Early Detection Research Network (EDRN), and several Consultative Committee for Space Data Systems (CCSDS) projects. The objective of the Space Physics Archive Search and Exchange (SPASE) program is to promote collaboration and coordination of archiving activity for the Space Plasma Physics community and ensure the compatibility of the architectures used for a global distributed system and the individual data centers. Over the past several years, the SPASE data model working group has made great progress in developing the SPASE Data Model and supporting artifacts including a data dictionary, XML Schema, and two ontologies. The authors have captured the SPASE Information Model in this framework. This allows the generation of documentation that presents the SPASE Information Model in object-oriented notation including UML class diagrams and class hierarchies. The modeling information can also be exported to semantic web languages such as OWL and RDF and written to XML Metadata Interchange (XMI) files for import into UML tools.

An Ethnographic Study of a Developing Virtual Organization in Education

ERIC Educational Resources Information Center

Couch, Stephanie R.

2012-01-01

This ethnographic study answers calls for research into the ways that virtual organizations (or innovation-driven collaborative teams) form and develop, what supports and constraints their development, and the leadership models that support the organizations' work. The study examines how a virtual organization emerged from an intersegmental…

Faculty Development: A Stage Model Matched to Blended Learning Maturation

ERIC Educational Resources Information Center

Fetters, Michael L.; Duby, Tova Garcia

2011-01-01

Faculty development programs are critical to the implementation and support of curriculum innovation. In this case study, the authors present lessons learned from ten years of experience in faculty development programs created to support innovation in technology enhanced learning. Stages of curriculum innovation are matched to stages of faculty…

Large-scale wind tunnel tests of a sting-supported V/STOL fighter model at high angles of attack

NASA Technical Reports Server (NTRS)

Stoll, F.; Minter, E. A.

1981-01-01

A new sting model support has been developed for the NASA/Ames 40- by 80-Foot Wind Tunnel. This addition to the facility permits testing of relatively large models to large angles of attack or angles of yaw depending on model orientation. An initial test on the sting is described. This test used a 0.4-scale powered V/STOL model designed for testing at angles of attack to 90 deg and greater. A method for correcting wake blockage was developed and applied to the force and moment data. Samples of this data and results of surface-pressure measurements are presented.

CDISC Terminology

Cancer.gov

Clinical Data Interchange Standards Consortium (CDISC) is an international, non-profit organization that develops and supports global data standards for medical research. CDISC is working actively with EVS to develop and support controlled terminology in several areas, notably CDISC's Study Data Tabulation Model (SDTM).

Using A Model-Based Systems Engineering Approach For Exploration Medical System Development

NASA Technical Reports Server (NTRS)

Hanson, A.; Mindock, J.; McGuire, K.; Reilly, J.; Cerro, J.; Othon, W.; Rubin, D.; Urbina, M.; Canga, M.

2017-01-01

NASA's Human Research Program's Exploration Medical Capabilities (ExMC) element is defining the medical system needs for exploration class missions. ExMC's Systems Engineering (SE) team will play a critical role in successful design and implementation of the medical system into exploration vehicles. The team's mission is to "Define, develop, validate, and manage the technical system design needed to implement exploration medical capabilities for Mars and test the design in a progression of proving grounds." Development of the medical system is being conducted in parallel with exploration mission architecture and vehicle design development. Successful implementation of the medical system in this environment will require a robust systems engineering approach to enable technical communication across communities to create a common mental model of the emergent engineering and medical systems. Model-Based Systems Engineering (MBSE) improves shared understanding of system needs and constraints between stakeholders and offers a common language for analysis. The ExMC SE team is using MBSE techniques to define operational needs, decompose requirements and architecture, and identify medical capabilities needed to support human exploration. Systems Modeling Language (SysML) is the specific language the SE team is utilizing, within an MBSE approach, to model the medical system functional needs, requirements, and architecture. Modeling methods are being developed through the practice of MBSE within the team, and tools are being selected to support meta-data exchange as integration points to other system models are identified. Use of MBSE is supporting the development of relationships across disciplines and NASA Centers to build trust and enable teamwork, enhance visibility of team goals, foster a culture of unbiased learning and serving, and be responsive to customer needs. The MBSE approach to medical system design offers a paradigm shift toward greater integration between vehicle and the medical system and directly supports the transition of Earth-reliant ISS operations to the Earth-independent operations envisioned for Mars. Here, we describe the methods and approach to building this integrated model.

Developing infrastructure for interconnecting transportation network and electric grid.

DOT National Transportation Integrated Search

2011-09-01

This report is primarily focused on the development of mathematical models that can be used to : support decisions regarding a charging station location and installation problem. The major parts : of developing the models included identification of t...

Air Quality Response Modeling for Decision Support | Science ...

EPA Pesticide Factsheets

Air quality management relies on photochemical models to predict the responses of pollutant concentrations to changes in emissions. Such modeling is especially important for secondary pollutants such as ozone and fine particulate matter which vary nonlinearly with changes in emissions. Numerous techniques for probing pollutant-emission relationships within photochemical models have been developed and deployed for a variety of decision support applications. However, atmospheric response modeling remains complicated by the challenge of validating sensitivity results against observable data. This manuscript reviews the state of the science of atmospheric response modeling as well as efforts to characterize the accuracy and uncertainty of sensitivity results. The National Exposure Research Laboratory′s (NERL′s) Atmospheric Modeling and Analysis Division (AMAD) conducts research in support of EPA′s mission to protect human health and the environment. AMAD′s research program is engaged in developing and evaluating predictive atmospheric models on all spatial and temporal scales for forecasting the Nation′s air quality and for assessing changes in air quality and air pollutant exposures, as affected by changes in ecosystem management and regulatory decisions. AMAD is responsible for providing a sound scientific and technical basis for regulatory policies based on air quality models to improve ambient air quality. The models developed by AMAD are being use

Yield model development project implementation plan

NASA Technical Reports Server (NTRS)

Ambroziak, R. A.

1982-01-01

Tasks remaining to be completed are summarized for the following major project elements: (1) evaluation of crop yield models; (2) crop yield model research and development; (3) data acquisition processing, and storage; (4) related yield research: defining spectral and/or remote sensing data requirements; developing input for driving and testing crop growth/yield models; real time testing of wheat plant process models) and (5) project management and support.

Interactive Model-Centric Systems Engineering (IMCSE) Phase 1

DTIC Science & Technology

2014-09-30

and supporting infrastructure ...testing. 4. Supporting MPTs. During Phase 1, the opportunity to develop several MPTs to support IMCSE arose, including supporting infrastructure ...Analysis will be completed and tested with a case application, along with preliminary supporting infrastructure , which will then be used to inform the

Establishing a model to assess the effects of school support and self-care behaviors on life satisfaction in adolescents with type 1 diabetes in Taiwan.

PubMed

Tang, Shan-Mei; Chen, Shu-Wen; Wang, Ruey-Hsia

2013-12-01

Life satisfaction is associated with positive development in adolescents. Understanding a path model of life satisfaction can help healthcare providers design interventions to improve positive development in adolescents with type 1 diabetes. The aim of this study was to construct a model that assesses the effects of school support and self-care behaviors on life satisfaction in adolescents with type 1 diabetes in Taiwan. This study used a cross-sectional design. One hundred and thirty-nine adolescents aged 10-18 years and diagnosed with type 1 diabetes were recruited. Participants completed questionnaires that assessed perceived school support, self-care behaviors, and life satisfaction. The hypothesized model was tested using structural equation modeling. School support significantly and directly affected self-care behaviors (β = .46, p = .022) and life satisfaction (β = .39, p = .034), self-care behaviors directly affected life satisfaction (β = .56, p = .048), and school support indirectly affected life satisfaction (β = .26, p = .015) through the mediation of self-care behaviors. The fix indices were as follows: χ2 = 8.141, df = 11, p = .701, goodness of fit index = .984, normed fit index = .949, and root mean square residual = .001. The model explained 66.1% of total life satisfaction variance. School support and self-care behaviors positively influence the life satisfaction of adolescents with type 1 diabetes. Improvements in school support and self-care behaviors are necessary to improve life satisfaction in this vulnerable group.

A geostatistical approach to the change-of-support problem and variable-support data fusion in spatial analysis

NASA Astrophysics Data System (ADS)

Wang, Jun; Wang, Yang; Zeng, Hui

2016-01-01

A key issue to address in synthesizing spatial data with variable-support in spatial analysis and modeling is the change-of-support problem. We present an approach for solving the change-of-support and variable-support data fusion problems. This approach is based on geostatistical inverse modeling that explicitly accounts for differences in spatial support. The inverse model is applied here to produce both the best predictions of a target support and prediction uncertainties, based on one or more measurements, while honoring measurements. Spatial data covering large geographic areas often exhibit spatial nonstationarity and can lead to computational challenge due to the large data size. We developed a local-window geostatistical inverse modeling approach to accommodate these issues of spatial nonstationarity and alleviate computational burden. We conducted experiments using synthetic and real-world raster data. Synthetic data were generated and aggregated to multiple supports and downscaled back to the original support to analyze the accuracy of spatial predictions and the correctness of prediction uncertainties. Similar experiments were conducted for real-world raster data. Real-world data with variable-support were statistically fused to produce single-support predictions and associated uncertainties. The modeling results demonstrate that geostatistical inverse modeling can produce accurate predictions and associated prediction uncertainties. It is shown that the local-window geostatistical inverse modeling approach suggested offers a practical way to solve the well-known change-of-support problem and variable-support data fusion problem in spatial analysis and modeling.

Components of Social Competence and Strategies of Support: Considering What to Teach and How

ERIC Educational Resources Information Center

Han, Heejeong Sophia; Kemple, Kristen Mary

2006-01-01

Decisions about how to support the development of young children's social competence must be made on the basis of knowledge of important competencies to be developed, as well as effective strategies to support those competencies. This paper combines a broad-definition model of components of social competence (Kostelnik, Stein, Whiren, Soderman, &…

Modeling Studies of the Effects of Winds and Heat Flux on the Tropical Oceans

NASA Technical Reports Server (NTRS)

Seager, R.

1999-01-01

Over a decade ago, funding from this NASA grant supported the development of the Cane-Zebiak ENSO prediction model which remains in use to this day. It also supported our work developing schemes for modeling the air-sea heat flux in ocean models used for studying climate variability. We introduced a succession of simple boundary layer models that allow the fluxes to be computed internally in the model and avoid the need to specify the atmospheric thermodynamic state. These models have now reached a level of generality that allows modeling of the global, rather than just tropical, ocean, including sea ice cover. The most recent versions of these boundary layer models have been widely distributed around the world and are in use by many ocean modeling groups.

MSW Time to Tumor Model and Supporting Documentation

EPA Science Inventory

The multistage Weibull (MSW) time-to-tumor model and related documentation were developed principally (but not exclusively) for conducting time-to-tumor analyses to support risk assessments under the IRIS program. These programs and related docum...

Predictive Modeling of Student Performances for Retention and Academic Support in a Diagnostic Medical Sonography Program

ERIC Educational Resources Information Center

Borghese, Peter; Lacey, Sandi

2014-01-01

As part of a retention and academic support program, data was collected to develop a predictive model of student performances in core classes in a Diagnostic Medical Sonography (DMS) program. The research goal was to identify students likely to have difficulty with coursework and provide supplemental tutorial support. The focus was on the…

Integrating climatic and fuels information into National Fire Risk Decision Support Tools

Treesearch

W. Cooke; V. Anantharaj; C. Wax; J. Choi; K. Grala; M. Jolly; G.P. Dixon; J. Dyer; D.L. Evans; G.B. Goodrich

2007-01-01

The Wildland Fire Assessment System (WFAS) is a component of the U.S. Department of Agriculture, Forest Service Decision Support Systems (DSS) that support fire potential modeling. Fire potential models for Mississippi and for Eastern fire environments have been developed as part of a National Aeronautic and Space Agency-funded study aimed at demonstrating the utility...

Architectural approaches for HL7-based health information systems implementation.

PubMed

López, D M; Blobel, B

2010-01-01

Information systems integration is hard, especially when semantic and business process interoperability requirements need to be met. To succeed, a unified methodology, approaching different aspects of systems architecture such as business, information, computational, engineering and technology viewpoints, has to be considered. The paper contributes with an analysis and demonstration on how the HL7 standard set can support health information systems integration. Based on the Health Information Systems Development Framework (HIS-DF), common architectural models for HIS integration are analyzed. The framework is a standard-based, consistent, comprehensive, customizable, scalable methodology that supports the design of semantically interoperable health information systems and components. Three main architectural models for system integration are analyzed: the point to point interface, the messages server and the mediator models. Point to point interface and messages server models are completely supported by traditional HL7 version 2 and version 3 messaging. The HL7 v3 standard specification, combined with service-oriented, model-driven approaches provided by HIS-DF, makes the mediator model possible. The different integration scenarios are illustrated by describing a proof-of-concept implementation of an integrated public health surveillance system based on Enterprise Java Beans technology. Selecting the appropriate integration architecture is a fundamental issue of any software development project. HIS-DF provides a unique methodological approach guiding the development of healthcare integration projects. The mediator model - offered by the HIS-DF and supported in HL7 v3 artifacts - is the more promising one promoting the development of open, reusable, flexible, semantically interoperable, platform-independent, service-oriented and standard-based health information systems.

Using ILOG OPL-CPLEX and ILOG Optimization Decision Manager (ODM) to Develop Better Models

NASA Astrophysics Data System (ADS)

2008-10-01

This session will provide an in-depth overview on building state-of-the-art decision support applications and models. You will learn how to harness the full power of the ILOG OPL-CPLEX-ODM Development System (ODMS) to develop optimization models and decision support applications that solve complex problems ranging from near real-time scheduling to long-term strategic planning. We will demonstrate how to use ILOG's Open Programming Language (OPL) to quickly model problems solved by ILOG CPLEX, and how to use ILOG ODM to gain further insight about the model. By the end of the session, attendees will understand how to take advantage of the powerful combination of ILOG OPL (to describe an optimization model) and ILOG ODM (to understand the relationships between data, decision variables and constraints).

A Community-Based, Technology-Supported Health Service for Detecting and Preventing Frailty among Older Adults: A Participatory Design Development Process.

PubMed

van Velsen, Lex; Illario, Maddalena; Jansen-Kosterink, Stephanie; Crola, Catherine; Di Somma, Carolina; Colao, Annamaria; Vollenbroek-Hutten, Miriam

2015-01-01

Frailty is a multifaceted condition that affects many older adults and marks decline on areas such as cognition, physical condition, and nutritional status. Frail individuals are at increased risk for the development of disability, dementia, and falls. There are hardly any health services that enable the identification of prefrail individuals and that focus on prevention of further functional decline. In this paper, we discuss the development of a community-based, technology-supported health service for detecting prefrailty and preventing frailty and further functional decline via participatory design with a wide range of stakeholders. The result is an innovative service model in which an online platform supports the integration of traditional services with novel, Information Communication Technology supported tools. This service is capable of supporting the different phases of screening and offers training services, by also integrating them with community-based services. The service model can be used as a basis for developing similar services within a wide range of healthcare systems. We present the service model, the general functioning of the technology platform, and the different ways in which screening for and prevention of frailty has been localized. Finally, we reflect on the added value of participatory design for creating such health services.

Construction of technological artifacts and teaching strategies to promote flexible scientific understanding

NASA Astrophysics Data System (ADS)

Spitulnik, Michele Wisnudel

Science education reforms advocate inquiry as a way to build explanations and make informed decisions. Based on this call this dissertation (1) defines flexible scientific understanding by elaborating on content, inquiry and epistemic understandings; (2) describes an inquiry based unit that integrates dynamic modeling software; (3) examines students' understandings as they construct models; and (4) identifies instructional strategies that support inquiry and model building. A curriculum unit was designed to engage students in inquiry by identifying problems and constructing models to represent, explain and predict phenomena. Ninth grade students in a public mid-western high school worked in teams of 2-3 to ask questions, find information and reflect on the purposes of models. Data sources including classroom video, observations, interviews, student models and handouts were used to formulate cases that examine how two groups construct understanding. A teacher case study identifies the teaching strategies that support understanding. Categories within content, inquiry and epistemic understandings were used to analyze student understandings and teaching supports. The findings demonstrate that students can build flexible understanding by constructing models. Students built: (1) content understanding by identifying key ideas and building relationships and explanations of phenomena; (2) inquiry understanding by defining problems, constructing models and developing positions; and (3) epistemic understanding by describing the purposes of models as generalizing phenomena, testing hypotheses and making predictions. However, students demonstrated difficulty in using evidence to defend scientific arguments. Strategies that support flexible understanding were also identified. Content supports include: setting expectations for explanations; using examples to illustrate explanations; modeling questions; and providing feedback that prompts detailed explanations. Supports for inquiry are setting expectations for data gathering; using examples that illustrate model building; modeling the development of an argument; and providing feedback to promote coherent models. Epistemic supports include: using examples to illustrate purposes and assumptions within models, and providing feedback as students evaluate their models. The dissertation demonstrates that teaching strategies impact student understanding but are challenging to implement. When strategies are not used, students do not necessarily construct desired outcomes such as, using evidence to support arguments.

The Application of Modeling and Simulation in Capacity Management within the ITIL Framework

NASA Technical Reports Server (NTRS)

Rahmani, Sonya; vonderHoff, Otto

2010-01-01

Tightly integrating modeling and simulation techniques into Information Technology Infrastructure Library (ITIL) practices can be one of the driving factors behind a successful and cost-effective capacity management effort for any Information Technology (IT) system. ITIL is a best practices framework for managing IT infrastructure, development and operations. Translating ITIL theory into operational reality can be a challenge. This paper aims to highlight how to best integrate modeling and simulation into an ITIL implementation. For cases where the project team initially has difficulty gaining consensus on investing in modeling and simulation resources, a clear definition for M&S implementation into the ITIL framework, specifically its role in supporting Capacity Management, is critical to gaining the support required to garner these resources. This implementation should also help to clearly define M&S support to the overall system mission. This paper will describe the development of an integrated modeling approach and how best to tie M&S to definitive goals for evaluating system capacity and performance requirements. Specifically the paper will discuss best practices for implementing modeling and simulation into ITIL. These practices hinge on implementing integrated M&S methods that 1) encompass at least two or more predictive modeling techniques, 2) complement each one's respective strengths and weaknesses to support the validation of predicted results, and 3) are tied to the system's performance and workload monitoring efforts. How to structure two forms of modeling: statistical and simUlation in the development of "As Is" and "To Be" efforts will be used to exemplify the integrated M&S methods. The paper will show how these methods can better support the project's overall capacity management efforts.

Thinking Together: Modeling Clinical Decision-Support as a Sociotechnical System

PubMed Central

Hussain, Mustafa I.; Reynolds, Tera L.; Mousavi, Fatemeh E.; Chen, Yunan; Zheng, Kai

2017-01-01

Computerized clinical decision-support systems are members of larger sociotechnical systems, composed of human and automated actors, who send, receive, and manipulate artifacts. Sociotechnical consideration is rare in the literature. This makes it difficult to comparatively evaluate the success of CDS implementations, and it may also indicate that sociotechnical context receives inadequate consideration in practice. To facilitate sociotechnical consideration, we developed the Thinking Together model, a flexible diagrammatical means of representing CDS systems as sociotechnical systems. To develop this model, we examined the literature with the lens of Distributed Cognition (DCog) theory. We then present two case studies of vastly different CDSSs, one almost fully automated and the other with minimal automation, to illustrate the flexibility of the Thinking Together model. We show that this model, informed by DCog and the CDS literature, are capable of supporting both research, by enabling comparative evaluation, and practice, by facilitating explicit sociotechnical planning and communication. PMID:29854164

Development of a Prototype Decision Support System to Manage the Air Force Alternative Care Program

DTIC Science & Technology

1990-09-01

development model was selected to structure the development process. Since it is necessary to ensure...uncertainty. Furthermore, the SDLC model provides a specific framework "by which an application is conceived, developed , and implemented" (Davis and Olson...associated with the automation of the manual ACP procedures. The SDLC Model has three stages: (1) definition, (2) development , and (3) installation

Developing and Modeling Complex Social Interventions: Introducing the Connecting People Intervention

ERIC Educational Resources Information Center

Webber, Martin; Reidy, Hannah; Ansari, David; Stevens, Martin; Morris, David

2016-01-01

Objectives: Modeling the processes involved in complex social interventions is important in social work practice, as it facilitates their implementation and translation into different contexts. This article reports the process of developing and modeling the connecting people intervention (CPI), a model of practice that supports people with mental…

How Do You Evaluate Everyone Who Isn't a Teacher? An Adaptable Evaluation Model for Professional Support Personnel.

ERIC Educational Resources Information Center

Stronge, James H.; And Others

The evaluation of professional support personnel in the schools has been a neglected area in educational evaluation. The Center for Research on Educational Accountability and Teacher Evaluation (CREATE) has worked to develop a conceptually sound evaluation model and then to translate the model into practical evaluation procedures that facilitate…

Prevent-Teach-Reinforce: The School-Based Model of Individualized Positive Behavior Support

ERIC Educational Resources Information Center

Dunlap, Glen; Iovannone, Rose; Kincaid, Donald; Wilson, Kelly; Christiansen, Kathy; Strain, Phillip; English, Carie

2010-01-01

Solve serious behavior challenges in K-8 classrooms with this easy-to-use book, the first practical guide to the research-proven Prevent-Teach-Reinforce (PTR) model. Developed by some of the most respected authorities on positive behavior support, this innovative model gives school-based teams a five-step plan for reducing problems unresolved by…

Marshall Space Flight Center ECLSS technology activities

NASA Technical Reports Server (NTRS)

Wieland, Paul

1990-01-01

Viewgraphs on Environmental Control and Life Support System (ECLSS) technology activities are presented. Topics covered include: analytical development; ECLSS modeling approach; example of water reclamation modeling needs; and hardware development and testing.

A Teacher Professional Development Model for Teaching Socioscientific Issues

ERIC Educational Resources Information Center

Carson, Katherine; Dawson, Vaille

2016-01-01

This paper describes the development and implementation of a three-pillared model for teaching socioscientific issues: teacher professional development; curriculum resources; and classroom support. A professional development program and curriculum resource based on the socioscientific issue of climate change was trialled with 75 Western Australian…

Predictive Modeling of the CDRA 4BMS

NASA Technical Reports Server (NTRS)

Coker, Robert F.; Knox, James C.

2016-01-01

As part of NASA's Advanced Exploration Systems (AES) program and the Life Support Systems Project (LSSP), fully predictive models of the Four Bed Molecular Sieve (4BMS) of the Carbon Dioxide Removal Assembly (CDRA) on the International Space Station (ISS) are being developed. This virtual laboratory will be used to help reduce mass, power, and volume requirements for future missions. In this paper we describe current and planned modeling developments in the area of carbon dioxide removal to support future crewed Mars missions as well as the resolution of anomalies observed in the ISS CDRA.

A Prototype for the Support of Integrated Software Process Development and Improvement

NASA Astrophysics Data System (ADS)

Porrawatpreyakorn, Nalinpat; Quirchmayr, Gerald; Chutimaskul, Wichian

An efficient software development process is one of key success factors for quality software. Not only can the appropriate establishment but also the continuous improvement of integrated project management and of the software development process result in efficiency. This paper hence proposes a software process maintenance framework which consists of two core components: an integrated PMBOK-Scrum model describing how to establish a comprehensive set of project management and software engineering processes and a software development maturity model advocating software process improvement. Besides, a prototype tool to support the framework is introduced.

ITE CHARACTERIZATION TO SUPPORT CONCEPTUAL MODEL DEVELOPMENT FOR SUBSURFACE RADIONUCLIDE TRANSPORT

EPA Science Inventory

Remediation of radionuclide contaminants in ground water often begins with the development of conceptual and analytical models that guide our understanding of the processes controlling radionuclide transport. The reliability of these models is often predicated on the collection o...

OASIS: A GEOGRAPHICAL DECISION SUPPORT SYSTEM FOR GROUND-WATER CONTAMINANT MODELING

EPA Science Inventory

Three new software technologies were applied to develop an efficient and easy to use decision support system for ground-water contaminant modeling. Graphical interfaces create a more intuitive and effective form of communication with the computer compared to text-based interfaces...

1992 NASA Life Support Systems Analysis workshop

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.

1992-01-01

The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.

Integrating the Base of Aircraft Data (BADA) in CTAS Trajectory Synthesizer

NASA Technical Reports Server (NTRS)

Abramson, Michael; Ali, Kareem

2012-01-01

The Center-Terminal Radar Approach Control (TRACON) Automation System (CTAS), developed at NASA Ames Research Center for assisting controllers in the management and control of air traffic in the extended terminal area, supports the modeling of more than four hundred aircraft types. However, 90% of them are supported indirectly by mapping them to one of a relatively few aircraft types for which CTAS has detailed drag and engine thrust models. On the other hand, the Base of Aircraft Data (BADA), developed and maintained by Eurocontrol, supports more than 300 aircraft types, about one third of which are directly supported, i.e. they have validated performance data. All these data were made available for CTAS by integrating BADA version 3.8 into CTAS Trajectory Synthesizer (TS). Several validation tools were developed and used to validate the integrated code and to evaluate the accuracy of trajectory predictions generated using CTAS "native" and BADA Aircraft Performance Models (APM) comparing them with radar track data. Results of these comparisons indicate that the two models have different strengths and weaknesses. The BADA APM can improve the accuracy of CTAS predictions at least for some aircraft types, especially small aircraft, and for some flight phases, especially climb.

Experimental and computational prediction of glass transition temperature of drugs.

PubMed

Alzghoul, Ahmad; Alhalaweh, Amjad; Mahlin, Denny; Bergström, Christel A S

2014-12-22

Glass transition temperature (Tg) is an important inherent property of an amorphous solid material which is usually determined experimentally. In this study, the relation between Tg and melting temperature (Tm) was evaluated using a data set of 71 structurally diverse druglike compounds. Further, in silico models for prediction of Tg were developed based on calculated molecular descriptors and linear (multilinear regression, partial least-squares, principal component regression) and nonlinear (neural network, support vector regression) modeling techniques. The models based on Tm predicted Tg with an RMSE of 19.5 K for the test set. Among the five computational models developed herein the support vector regression gave the best result with RMSE of 18.7 K for the test set using only four chemical descriptors. Hence, two different models that predict Tg of drug-like molecules with high accuracy were developed. If Tm is available, a simple linear regression can be used to predict Tg. However, the results also suggest that support vector regression and calculated molecular descriptors can predict Tg with equal accuracy, already before compound synthesis.

Enterprise application architecture development based on DoDAF and TOGAF

NASA Astrophysics Data System (ADS)

Tao, Zhi-Gang; Luo, Yun-Feng; Chen, Chang-Xin; Wang, Ming-Zhe; Ni, Feng

2017-05-01

For the purpose of supporting the design and analysis of enterprise application architecture, here, we report a tailored enterprise application architecture description framework and its corresponding design method. The presented framework can effectively support service-oriented architecting and cloud computing by creating the metadata model based on architecture content framework (ACF), DoDAF metamodel (DM2) and Cloud Computing Modelling Notation (CCMN). The framework also makes an effort to extend and improve the mapping between The Open Group Architecture Framework (TOGAF) application architectural inputs/outputs, deliverables and Department of Defence Architecture Framework (DoDAF)-described models. The roadmap of 52 DoDAF-described models is constructed by creating the metamodels of these described models and analysing the constraint relationship among metamodels. By combining the tailored framework and the roadmap, this article proposes a service-oriented enterprise application architecture development process. Finally, a case study is presented to illustrate the results of implementing the tailored framework in the Southern Base Management Support and Information Platform construction project using the development process proposed by the paper.

Assembly Tests of the First Nb 3 Sn Low-Beta Quadrupole Short Model for the Hi-Lumi LHC

DOE PAGES

Pan, H.; Felice, H.; Cheng, D. W.; ...

2016-01-18

In preparation for the high-luminosity upgrade of the Large Hadron Collider (LHC), the LHC Accelerator Research Program (LARP) in collaboration with CERN is pursuing the development of MQXF: a 150-mm-aperture high-field Nb3Sn quadrupole magnet. Moreover, the development phase starts with the fabrication and test of several short models (1.2-m magnetic length) and will continue with the development of several long prototypes. All of them are mechanically supported using a shell-based support structure, which has been extensively demonstrated on several R&D models within LARP. The first short model MQXFS-AT has been assembled at LBNL with coils fabricated by LARP and CERN.more » In our paper, we summarize the assembly process and show how it relies strongly on experience acquired during the LARP 120-mm-aperture HQ magnet series. We also present comparison between strain gauges data and finite-element model analysis. Finally, we present the implication of the MQXFS-AT experience on the design of the long prototype support structure.« less

DengueME: A Tool for the Modeling and Simulation of Dengue Spatiotemporal Dynamics †

PubMed Central

de Lima, Tiago França Melo; Lana, Raquel Martins; de Senna Carneiro, Tiago Garcia; Codeço, Cláudia Torres; Machado, Gabriel Souza; Ferreira, Lucas Saraiva; de Castro Medeiros, Líliam César; Davis Junior, Clodoveu Augusto

2016-01-01

The prevention and control of dengue are great public health challenges for many countries, particularly since 2015, as other arboviruses have been observed to interact significantly with dengue virus. Different approaches and methodologies have been proposed and discussed by the research community. An important tool widely used is modeling and simulation, which help us to understand epidemic dynamics and create scenarios to support planning and decision making processes. With this aim, we proposed and developed DengueME, a collaborative open source platform to simulate dengue disease and its vector’s dynamics. It supports compartmental and individual-based models, implemented over a GIS database, that represent Aedes aegypti population dynamics, human demography, human mobility, urban landscape and dengue transmission mediated by human and mosquito encounters. A user-friendly graphical interface was developed to facilitate model configuration and data input, and a library of models was developed to support teaching-learning activities. DengueME was applied in study cases and evaluated by specialists. Other improvements will be made in future work, to enhance its extensibility and usability. PMID:27649226

Atmospheric Models for Aerocapture

NASA Technical Reports Server (NTRS)

Justus, C. G.; Duval, Aleta; Keller, Vernon W.

2003-01-01

There are eight destinations in the Solar System with sufficient atmosphere for aerocapture to be a viable aeroassist option - Venus, Earth, Mars, Jupiter, Saturn and its moon Titan, Uranus, and Neptune. Engineering-level atmospheric models for four of these targets (Earth, Mars, Titan, and Neptune) have been developed for NASA to support systems analysis studies of potential future aerocapture missions. Development of a similar atmospheric model for Venus has recently commenced. An important capability of all of these models is their ability to simulate quasi-random density perturbations for Monte Carlo analyses in developing guidance, navigation and control algorithms, and for thermal systems design. Similarities and differences among these atmospheric models are presented, with emphasis on the recently developed Neptune model and on planned characteristics of the Venus model. Example applications for aerocapture are also presented and illustrated. Recent updates to the Titan atmospheric model, in anticipation of applications for trajectory and atmospheric reconstruct of Huygens Robe entry at Titan, are discussed. Recent updates to the Mars atmospheric model, in support of ongoing Mars aerocapture systems analysis studies, are also presented.

Biological life-support systems

NASA Technical Reports Server (NTRS)

Shepelev, Y. Y.

1975-01-01

The establishment of human living environments by biologic methods, utilizing the appropriate functions of autotrophic and heterotrophic organisms is examined. Natural biologic systems discussed in terms of modeling biologic life support systems (BLSS), the structure of biologic life support systems, and the development of individual functional links in biologic life support systems are among the factors considered. Experimental modeling of BLSS in order to determine functional characteristics, mechanisms by which stability is maintained, and principles underlying control and regulation is also discussed.

The FoReVer Methodology: A MBSE Framework for Formal Verification

NASA Astrophysics Data System (ADS)

Baracchi, Laura; Mazzini, Silvia; Cimatti, Alessandro; Tonetta, Stefano; Garcia, Gerald

2013-08-01

The need for high level of confidence and operational integrity in critical space (software) systems is well recognized in the Space industry and has been addressed so far through rigorous System and Software Development Processes and stringent Verification and Validation regimes. The Model Based Space System Engineering process (MBSSE) derived in the System and Software Functional Requirement Techniques study (SSFRT) focused on the application of model based engineering technologies to support the space system and software development processes, from mission level requirements to software implementation through model refinements and translations. In this paper we report on our work in the ESA-funded FoReVer project where we aim at developing methodological, theoretical and technological support for a systematic approach to the space avionics system development, in phases 0/A/B/C. FoReVer enriches the MBSSE process with contract-based formal verification of properties, at different stages from system to software, through a step-wise refinement approach, with the support for a Software Reference Architecture.

The Development of a Physician Vitality Program: A Brief Report.

PubMed

Hernandez, Barbara Couden; Thomas, Tamara L

2015-10-01

We describe the development of an innovative program to support physician vitality. We provide the context and process of program delivery which includes a number of experimental support programs. We discuss a model for intervention and methods used to enhance physician resilience, support work-life balance, and change the culture to one that explicitly addresses the physician's biopsychosocial-spiritual needs. Recommendations are given for marriage and family therapists (MFTs) who wish to develop similar support programs for healthcare providers. Video Abstract. © 2014 American Association for Marriage and Family Therapy.

A sustainable approach to planning housing and social care: if not now, when?

PubMed

Foord, M; Simic, P

2001-05-01

The publication of Supporting People (Department of Social Security 1998) has given urgency to discussions around needs analysis, planning, user voice and the development of 'normal' housing for people with support needs. This paper explores a project, which aimed to design a collaborative model for identifying supported housing needs. We provide an overview of the research background, local imperatives and findings, and point to the probability of increasing conflict between the policy of developing 'sustainable communities' and the development of housing for people with support needs.

Prioritization of engineering support requests and advanced technology projects using decision support and industrial engineering models

NASA Technical Reports Server (NTRS)

Tavana, Madjid

1995-01-01

The evaluation and prioritization of Engineering Support Requests (ESR's) is a particularly difficult task at the Kennedy Space Center (KSC) -- Shuttle Project Engineering Office. This difficulty is due to the complexities inherent in the evaluation process and the lack of structured information. The evaluation process must consider a multitude of relevant pieces of information concerning Safety, Supportability, O&M Cost Savings, Process Enhancement, Reliability, and Implementation. Various analytical and normative models developed over the past have helped decision makers at KSC utilize large volumes of information in the evaluation of ESR's. The purpose of this project is to build on the existing methodologies and develop a multiple criteria decision support system that captures the decision maker's beliefs through a series of sequential, rational, and analytical processes. The model utilizes the Analytic Hierarchy Process (AHP), subjective probabilities, the entropy concept, and Maximize Agreement Heuristic (MAH) to enhance the decision maker's intuition in evaluating a set of ESR's.

Supply Chain Engineering and the Use of a Supporting Knowledge Management Application

NASA Astrophysics Data System (ADS)

Laakmann, Frank

The future competition in markets will happen between logistics networks and no longer between enterprises. A new approach for supporting the engineering of logistics networks is developed by this research as a part of the Collaborative Research Centre (SFB) 559: "Modeling of Large Networks in Logistics" at the University of Dortmund together with the Fraunhofer-Institute of Material Flow and Logistics founded by Deutsche Forschungsgemeinschaft (DFG). Based on a reference model for logistics processes, the process chain model, a guideline for logistics engineers is developed to manage the different types of design tasks of logistics networks. The technical background of this solution is a collaborative knowledge management application. This paper will introduce how new Internet-based technologies support supply chain design projects.

Models for Deploying Open Source and Commercial Software to Support Earth Science Data Processing and Distribution

NASA Astrophysics Data System (ADS)

Yetman, G.; Downs, R. R.

2011-12-01

Software deployment is needed to process and distribute scientific data throughout the data lifecycle. Developing software in-house can take software development teams away from other software development projects and can require efforts to maintain the software over time. Adopting and reusing software and system modules that have been previously developed by others can reduce in-house software development and maintenance costs and can contribute to the quality of the system being developed. A variety of models are available for reusing and deploying software and systems that have been developed by others. These deployment models include open source software, vendor-supported open source software, commercial software, and combinations of these approaches. Deployment in Earth science data processing and distribution has demonstrated the advantages and drawbacks of each model. Deploying open source software offers advantages for developing and maintaining scientific data processing systems and applications. By joining an open source community that is developing a particular system module or application, a scientific data processing team can contribute to aspects of the software development without having to commit to developing the software alone. Communities of interested developers can share the work while focusing on activities that utilize in-house expertise and addresses internal requirements. Maintenance is also shared by members of the community. Deploying vendor-supported open source software offers similar advantages to open source software. However, by procuring the services of a vendor, the in-house team can rely on the vendor to provide, install, and maintain the software over time. Vendor-supported open source software may be ideal for teams that recognize the value of an open source software component or application and would like to contribute to the effort, but do not have the time or expertise to contribute extensively. Vendor-supported software may also have the additional benefits of guaranteed up-time, bug fixes, and vendor-added enhancements. Deploying commercial software can be advantageous for obtaining system or software components offered by a vendor that meet in-house requirements. The vendor can be contracted to provide installation, support and maintenance services as needed. Combining these options offers a menu of choices, enabling selection of system components or software modules that meet the evolving requirements encountered throughout the scientific data lifecycle.

A Systematic Process for Developing High Quality SaaS Cloud Services

NASA Astrophysics Data System (ADS)

La, Hyun Jung; Kim, Soo Dong

Software-as-a-Service (SaaS) is a type of cloud service which provides software functionality through Internet. Its benefits are well received in academia and industry. To fully utilize the benefits, there should be effective methodologies to support the development of SaaS services which provide high reusability and applicability. Conventional approaches such as object-oriented methods do not effectively support SaaS-specific engineering activities such as modeling common features, variability, and designing quality services. In this paper, we present a systematic process for developing high quality SaaS and highlight the essentiality of commonality and variability (C&V) modeling to maximize the reusability. We first define criteria for designing the process model and provide a theoretical foundation for SaaS; its meta-model and C&V model. We clarify the notion of commonality and variability in SaaS, and propose a SaaS development process which is accompanied with engineering instructions. Using the proposed process, SaaS services with high quality can be effectively developed.

A Model for Facilitating Curriculum Development in Higher Education: A Faculty-Driven, Data-Informed, and Educational Developer-Supported Approach

ERIC Educational Resources Information Center

Wolf, Peter

2007-01-01

In the fall of 2003, Teaching Support Services (TSS), a department at the University of Guelph, was approached by a faculty member in the department of food sciences. Professor Art Hill was interested in seeking support in systematically assessing the department's undergraduate curriculum and using that assessment to trigger further improvement of…

Supporting Comprehensive, Integrated, Three-Tiered Models of Prevention in Schools: Administrators' Perspectives

ERIC Educational Resources Information Center

Lane, Kathleen Lynne; Carter, Erik W.; Jenkins, Abbie; Dwiggins, Lauren; Germer, Kathryn

2015-01-01

We report findings from a statewide survey of 365 site-level administrators developed to (a) learn about the extent to which schools across the state were implementing components of multi-tiered systems of support and (b) determine the areas in which these schools might need professional development or resources to support them. At least half of…

Mobilizing Rural Community Resources for Support and Development of Local Learning Systems in Developing Countries.

ERIC Educational Resources Information Center

O'Grady, Barbara, Ed.; Levenson, Ruth, Ed.

Focusing on how local village communities in developing countries might support part or all of their educational costs, this study describes methods used by developing countries to reduce education costs and offers a model incorporating several of the most successful components of such projects. First is a discussion of methods used by governments…

Assessment in health care education - modelling and implementation of a computer supported scoring process.

PubMed

Alfredsson, Jayne; Plichart, Patrick; Zary, Nabil

2012-01-01

Research on computer supported scoring of assessments in health care education has mainly focused on automated scoring. Little attention has been given to how informatics can support the currently predominant human-based grading approach. This paper reports steps taken to develop a model for a computer supported scoring process that focuses on optimizing a task that was previously undertaken without computer support. The model was also implemented in the open source assessment platform TAO in order to study its benefits. Ability to score test takers anonymously, analytics on the graders reliability and a more time efficient process are example of observed benefits. A computer supported scoring will increase the quality of the assessment results.

Methodologic support in habilitation and rehabilitation: communicative action between practice and science.

PubMed

Iwarsson, S; Jernryd, E; Rutström, C; Boqvist, A

2000-01-01

This study evaluated the early phase of development of a model for quality improvement of habilitation and rehabilitation project processes. The focus of the methodologic support in habilitation and rehabilitation model was on cooperation between practice contexts and science. Habermas' theory about communicative action was a theoretical frame of reference. Three project coordinators and ten project leaders were interviewed. The results revealed different attitudes towards methodologic support activities, demonstrating the importance of acknowledging cognitive and social functions, the process of legitimization, different approaches of practice versus science, and problems regarding information and communication. The model was shown to be important in bridging the gap between practice and science. To support reflective and emancipatory cognitive learning, more efforts to foster communicative action are called for, and more attention must be paid to the importance different missions and organizational structures have for the development of the dialog between practitioners and researchers.

Space Weather Products at the Community Coordinated Modeling Center

NASA Technical Reports Server (NTRS)

Hesse, Michael; Kuznetsova, M.; Pulkkinen, A.; Maddox, M.; Rastaetter, L.; Berrios, D.; MacNeice, P.

2010-01-01

The Community Coordinated Modeling Center (CCMC) is a US inter-agency activity aiming at research in support of the generation of advanced space weather models. As one of its main functions, the CCMC provides to researchers the use of space science models, even if they are not model owners themselves. The second CCMC activity is to support Space Weather forecasting at national Space Weather Forecasting Centers. This second activity involves model evaluations, model transitions to operations, and the development of space weather forecasting tools. Owing to the pace of development in the science community, new model capabilities emerge frequently. Consequently, space weather products and tools involve not only increased validity, but often entirely new capabilities. This presentation will review the present state of space weather tools as well as point out emerging future capabilities.

Development of a diabetes care management curriculum in a family practice residency program.

PubMed

Nuovo, Jim; Balsbaugh, Thomas; Barton, Sue; Davidson, Ellen; Fox-Garcia, Jane; Gandolfo, Angela; Levich, Bridget; Seibles, Joann

2004-01-01

Improving the quality of care for patients with chronic illness has become a high priority. Implementing training programs in disease management (DM) so the next generation of physicians can manage chronic illness more effectively is challenging. Residency training programs have no specific mandate to implement DM training. Additional barriers at the training facility include: 1) lack of a population-based perspective for service delivery; 2) weak support for self-management of illness; 3) incomplete implementation due to physician resistance or inertia; and 4) few incentives to change practices and behaviors. In order to overcome these barriers, training programs must take the initiative to implement DM training that addresses each of these issues. We report the implementation of a chronic illness management curriculum based on the Improving Chronic Illness Care (ICIC) Model. Features of this process included both patient care and learner objectives. These were: development of a multidisciplinary diabetes DM team; development of a patient registry; development of diabetes teaching clinics in the family practice center (nutrition, general management classes, and one-on-one teaching); development of a group visit model; and training the residents in the elements of the ICIC Model, ie, the community, the health system, self-management support, delivery system design, decision support, and clinical information systems. Barriers to implementing these curricular changes were: the development of a patient registry; buy-in from faculty, residents, clinic leadership, staff, and patients for the chronic care model; the ability to bill for services and maintain clinical productivity; and support from the health system key stakeholders for sustainability. Unique features of each training site will dictate differences in emphasis and structure; however, the core principles of the ICIC Model in enhancing self-management may be generalized to all sites.

A New Framework for Adaptive Sampling and Analysis During Long-Term Monitoring and Remedial Action Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minsker, Barbara

2004-12-01

The Argonne team has gathered available data on monitoring wells and measured hydraulic heads from the Argonne 317/319 site and sent it to UIUC. Xiaodong Li, a research assistant supported by the project, has reviewed the data and has fit initial spatiotemporal statistical models to it. Another research assistant, Yonas Demissie, has completed generation of the artificial data that will be used for model development and testing. In order to generate the artificial data a detailed groundwater flow and contaminant transport model was developed based upon characteristics of the 317/319 site. The model covers a multi-year time horizon that includesmore » both before and after planting of the trees. As described in the proposal, the artificial data is created by adding ''measurement'' error to the ''true'' value from the numerical model. To date, only simple white noise error models have been considered. He is now reviewing the literature and beginning to develop a hierarchical modeling approach for the artificial data. Abhishek Singh, a third research assistant supported by the project, is implementing learning models for learning users preferences in an interactive genetic algorithm for solving the inverse problem. Meghna Babbar, the fourth research assistant supported by the project, has been improving the user interface for the interactive genetic algorithm and preparing a long-term monitoring design problem for testing the approach. Gayathri Gopalakrishnan, the last research assistant who is partially supported by the project, has collected substantial data from the 317/319 phytoremediation site at Argonne and has begun learning approaches for modeling these data.« less

Associations between teacher emotional support and depressive symptoms in Australian adolescents: a 5-year longitudinal study.

PubMed

Pössel, Patrick; Rudasill, Kathleen Moritz; Sawyer, Michael G; Spence, Susan H; Bjerg, Annie C

2013-11-01

Approximately 1/5 of adolescents develop depressive symptoms. Given that youths spend a good deal of their lives at school, it seems plausible that supportive relationships with teachers could benefit their emotional well-being. Thus, the purpose of this study is to examine the association between emotionally supportive teacher relationships and depression in adolescence. The so-called principle-effect and stress-buffer models could explain relationships between teacher emotional support and depressive symptoms, yet no study has used both models to test bidirectional relationships between teacher support and depressive symptoms in students separately by sex. Four-thousand three-hundred forty-one students (boys: n = 2,063; girls: n = 2,278) from Grades 8 to 12 completed the Center for Epidemiological Studies Depression Scale (CES-D), List of Threatening Experiences Questionnaire (LTEQ), and an instrument developed for the study to measure teacher support annually for 5 years. Results support neither of the 2 proposed models. Instead, they indicate that in the 1st years of high school, students of both sexes with average and high numbers of stressful events benefit from teacher support, while teacher support might have iatrogenic effects on students experiencing low numbers of stressful events. Possible explanations for the findings and future research are discussed.

Phosphorus and Phytoplankton in Lake Michigan: Model Post-audit and Projections

EPA Science Inventory

The eutrophication model, LM3-Eutro, was developed in support of the Lake Michigan Mass Balance Project to simulate chlorophyll-a (phytoplankton), phosphorus and carbon concentrations in the lake. This high-resolution carbon-based model was developed and calibrated using extensi...

Cell-oriented modeling of angiogenesis.

PubMed

Guidolin, Diego; Rebuffat, Piera; Albertin, Giovanna

2011-01-01

Due to its significant involvement in various physiological and pathological conditions, angiogenesis (the development of new blood vessels from an existing vasculature) represents an important area of the actual biological research and a field in which mathematical modeling proved particularly useful in supporting the experimental work. In this paper, we focus on a specific modeling strategy, known as "cell-centered" approach. This type of mathematical models work at a "mesoscopic scale," assuming the cell as the natural level of abstraction for computational modeling of development. They treat cells phenomenologically, considering their essential behaviors to study how tissue structure and organization emerge from the collective dynamics of multiple cells. The main contributions of the cell-oriented approach to the study of the angiogenic process will be described. From one side, they have generated "basic science understanding" about the process of capillary assembly during development, growth, and pathology. On the other side, models were also developed supporting "applied biomedical research" for the purpose of identifying new therapeutic targets and clinically relevant approaches for either inhibiting or stimulating angiogenesis.

Bayesian Model Development for Analysis of Open Source Information to Support the Assessment of Nuclear Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gastelum, Zoe N.; Whitney, Paul D.; White, Amanda M.

2013-07-15

Pacific Northwest National Laboratory has spent several years researching, developing, and validating large Bayesian network models to support integration of open source data sets for nuclear proliferation research. Our current work focuses on generating a set of interrelated models for multi-source assessment of nuclear programs, as opposed to a single comprehensive model. By using this approach, we can break down the models to cover logical sub-problems that can utilize different expertise and data sources. This approach allows researchers to utilize the models individually or in combination to detect and characterize a nuclear program and identify data gaps. The models operatemore » at various levels of granularity, covering a combination of state-level assessments with more detailed models of site or facility characteristics. This paper will describe the current open source-driven, nuclear nonproliferation models under development, the pros and cons of the analytical approach, and areas for additional research.« less

Intention to quit and the role of dark personality and perceived organizational support: A moderation and mediation model.

PubMed

Treglown, Luke; Zivkov, Katarina; Zarola, Anthony; Furnham, Adrian

2018-01-01

This study investigated the role of individual differences (dark personality) and situational factors (perceived organisational support) in explaining intention to quit. Four hundred and fifty-one (50 of which females) ambulance personnel completed three questionnaires (Hogan Development Survey; Perceived Organisational Support Survey; and a single item Intention to Quit measure) as a part of a selection and development assessment. Employees high on Excitable, Sceptical, and Mischievous, but low on Colourful were found to have greater intentions to quit. Additionally, employees high on Excitable, Sceptical, Reserved, and Leisurely, but low on Dutiful and Diligent had lower perceptions of organisational support. Structural Equation Modelling revealed that perceived organisational support plays both a mediating and moderating role on dark personality and intention to quit. Theoretical implications of personality's role in perceived organisational support and intention to quit are discussed.

Intention to quit and the role of dark personality and perceived organizational support: A moderation and mediation model

PubMed Central

Zivkov, Katarina; Zarola, Anthony; Furnham, Adrian

2018-01-01

This study investigated the role of individual differences (dark personality) and situational factors (perceived organisational support) in explaining intention to quit. Four hundred and fifty-one (50 of which females) ambulance personnel completed three questionnaires (Hogan Development Survey; Perceived Organisational Support Survey; and a single item Intention to Quit measure) as a part of a selection and development assessment. Employees high on Excitable, Sceptical, and Mischievous, but low on Colourful were found to have greater intentions to quit. Additionally, employees high on Excitable, Sceptical, Reserved, and Leisurely, but low on Dutiful and Diligent had lower perceptions of organisational support. Structural Equation Modelling revealed that perceived organisational support plays both a mediating and moderating role on dark personality and intention to quit. Theoretical implications of personality’s role in perceived organisational support and intention to quit are discussed. PMID:29596532

A computer model of the pediatric circulatory system for testing pediatric assist devices.

PubMed

Giridharan, Guruprasad A; Koenig, Steven C; Mitchell, Michael; Gartner, Mark; Pantalos, George M

2007-01-01

Lumped parameter computer models of the pediatric circulatory systems for 1- and 4-year-olds were developed to predict hemodynamic responses to mechanical circulatory support devices. Model parameters, including resistance, compliance and volume, were adjusted to match hemodynamic pressure and flow waveforms, pressure-volume loops, percent systole, and heart rate of pediatric patients (n = 6) with normal ventricles. Left ventricular failure was modeled by adjusting the time-varying compliance curve of the left heart to produce aortic pressures and cardiac outputs consistent with those observed clinically. Models of pediatric continuous flow (CF) and pulsatile flow (PF) ventricular assist devices (VAD) and intraaortic balloon pump (IABP) were developed and integrated into the heart failure pediatric circulatory system models. Computer simulations were conducted to predict acute hemodynamic responses to PF and CF VAD operating at 50%, 75% and 100% support and 2.5 and 5 ml IABP operating at 1:1 and 1:2 support modes. The computer model of the pediatric circulation matched the human pediatric hemodynamic waveform morphology to within 90% and cardiac function parameters with 95% accuracy. The computer model predicted PF VAD and IABP restore aortic pressure pulsatility and variation in end-systolic and end-diastolic volume, but diminish with increasing CF VAD support.

Developing a Model Component

NASA Technical Reports Server (NTRS)

Fields, Christina M.

2013-01-01

The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is,. responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) is a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The purpose of the UCTS is to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems s:luring their development. As an intern at KSC, my assignment was to develop a model component for the UCTS. I was given a fluid component (drier) to model in Matlab. The drier was a Catch All replaceable core type filter-drier. The filter-drier provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-drier also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. I completed training for UNIX and Simulink to help aid in my assignment. The filter-drier was modeled by determining affects it has on the pressure, velocity and temperature of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my model filter-drier in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements.

Models Extracted from Text for System-Software Safety Analyses

NASA Technical Reports Server (NTRS)

Malin, Jane T.

2010-01-01

This presentation describes extraction and integration of requirements information and safety information in visualizations to support early review of completeness, correctness, and consistency of lengthy and diverse system safety analyses. Software tools have been developed and extended to perform the following tasks: 1) extract model parts and safety information from text in interface requirements documents, failure modes and effects analyses and hazard reports; 2) map and integrate the information to develop system architecture models and visualizations for safety analysts; and 3) provide model output to support virtual system integration testing. This presentation illustrates the methods and products with a rocket motor initiation case.

Manufacturing data analytics using a virtual factory representation.

PubMed

Jain, Sanjay; Shao, Guodong; Shin, Seung-Jun

2017-01-01

Large manufacturers have been using simulation to support decision-making for design and production. However, with the advancement of technologies and the emergence of big data, simulation can be utilised to perform and support data analytics for associated performance gains. This requires not only significant model development expertise, but also huge data collection and analysis efforts. This paper presents an approach within the frameworks of Design Science Research Methodology and prototyping to address the challenge of increasing the use of modelling, simulation and data analytics in manufacturing via reduction of the development effort. The use of manufacturing simulation models is presented as data analytics applications themselves and for supporting other data analytics applications by serving as data generators and as a tool for validation. The virtual factory concept is presented as the vehicle for manufacturing modelling and simulation. Virtual factory goes beyond traditional simulation models of factories to include multi-resolution modelling capabilities and thus allowing analysis at varying levels of detail. A path is proposed for implementation of the virtual factory concept that builds on developments in technologies and standards. A virtual machine prototype is provided as a demonstration of the use of a virtual representation for manufacturing data analytics.

Development of a model of dementia support and pathway for culturally and linguistically diverse communities using co-creation and participatory action research.

PubMed

Goeman, Dianne; King, Jordan; Koch, Susan

2016-12-07

To develop an inclusive model of culturally sensitive support, using a specialist dementia nurse (SDN), to assist people with dementia from culturally and linguistically diverse (CALD) communities and their carers to overcome barriers to accessing health and social care services. Co-creation and participatory action research, based on reflection, data collection, interaction and feedback from participants and stakeholders. An SDN support model embedded within a home nursing service in Melbourne, Australia was implemented between October 2013 and October 2015. People experiencing memory loss or with a diagnosis of dementia from CALD backgrounds and their carers and family living in the community setting and expert stakeholders. Reflections from the SDN on interactions with participants and expert stakeholder opinion informed the CALD dementia support model and pathway. Interaction with 62 people living with memory loss or dementia from CALD backgrounds, carers or family members receiving support from the SDN and feedback from 13 expert stakeholders from community aged-care services, consumer advocacy organisations and ethnic community group representatives informed the development and refinement of the CALD dementia model of care and pathway. We delineate the three components of the 'SDN' model: the organisational support; a description of the role; and the competencies needed. Additionally, we provide an accompanying pathway for use by health professionals delivering care to consumers with dementia from CALD backgrounds. Our culturally sensitive model of dementia care and accompanying pathway allows for the tailoring of health and social support to assist people from CALD backgrounds, their carers and families to adjust to living with memory loss and remain living in the community as long as possible. The model and accompanying pathway also have the potential to be rolled out nationally for use by health professionals across a variety of health services. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Developing Formal Object-oriented Requirements Specifications: A Model, Tool and Technique.

ERIC Educational Resources Information Center

Jackson, Robert B.; And Others

1995-01-01

Presents a formal object-oriented specification model (OSS) for computer software system development that is supported by a tool that automatically generates a prototype from an object-oriented analysis model (OSA) instance, lets the user examine the prototype, and permits the user to refine the OSA model instance to generate a requirements…

Bioeconomic and market models

Treesearch

Richard Haynes; Darius Adams; Peter Ince; John Mills; Ralph Alig

2006-01-01

The United States has a century of experience with the development of models that describe markets for forest products and trends in resource conditions. In the last four decades, increasing rigor in policy debates has stimulated the development of models to support policy analysis. Increasingly, research has evolved (often relying on computer-based models) to increase...

Corporate Supports for the Family Lives of Employees: A Conceptual Model for Program Planning and Evaluation.

ERIC Educational Resources Information Center

Bowen, Gary L.

1988-01-01

Presents a conceptual model depicting the effects of family-oriented benefits, policies, and services in the corporate sector, on employees' work and family lives. Discusses the model in the context of the historical development of, and recent expansions in, corporate supports for employees and their families, and the need for a work-family model…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Richard Edward; Cetiner, Sacit M.; Fugate, David L.

The Small Modular Reactor (SMR) Dynamic System Modeling Tool project is in the third year of development. The project is designed to support collaborative modeling and study of various advanced SMR (non-light water cooled) concepts, including the use of multiple coupled reactors at a single site. The objective of the project is to provide a common simulation environment and baseline modeling resources to facilitate rapid development of dynamic advanced reactor SMR models, ensure consistency among research products within the Instrumentation, Controls, and Human-Machine Interface (ICHMI) technical area, and leverage cross-cutting capabilities while minimizing duplication of effort. The combined simulation environmentmore » and suite of models are identified as the Modular Dynamic SIMulation (MoDSIM) tool. The critical elements of this effort include (1) defining a standardized, common simulation environment that can be applied throughout the program, (2) developing a library of baseline component modules that can be assembled into full plant models using existing geometry and thermal-hydraulic data, (3) defining modeling conventions for interconnecting component models, and (4) establishing user interfaces and support tools to facilitate simulation development (i.e., configuration and parameterization), execution, and results display and capture.« less

Parameter selection for and implementation of a web-based decision-support tool to predict extubation outcome in premature infants.

PubMed

Mueller, Martina; Wagner, Carol L; Annibale, David J; Knapp, Rebecca G; Hulsey, Thomas C; Almeida, Jonas S

2006-03-01

Approximately 30% of intubated preterm infants with respiratory distress syndrome (RDS) will fail attempted extubation, requiring reintubation and mechanical ventilation. Although ventilator technology and monitoring of premature infants have improved over time, optimal extubation remains challenging. Furthermore, extubation decisions for premature infants require complex informational processing, techniques implicitly learned through clinical practice. Computer-aided decision-support tools would benefit inexperienced clinicians, especially during peak neonatal intensive care unit (NICU) census. A five-step procedure was developed to identify predictive variables. Clinical expert (CE) thought processes comprised one model. Variables from that model were used to develop two mathematical models for the decision-support tool: an artificial neural network (ANN) and a multivariate logistic regression model (MLR). The ranking of the variables in the three models was compared using the Wilcoxon Signed Rank Test. The best performing model was used in a web-based decision-support tool with a user interface implemented in Hypertext Markup Language (HTML) and the mathematical model employing the ANN. CEs identified 51 potentially predictive variables for extubation decisions for an infant on mechanical ventilation. Comparisons of the three models showed a significant difference between the ANN and the CE (p = 0.0006). Of the original 51 potentially predictive variables, the 13 most predictive variables were used to develop an ANN as a web-based decision-tool. The ANN processes user-provided data and returns the prediction 0-1 score and a novelty index. The user then selects the most appropriate threshold for categorizing the prediction as a success or failure. Furthermore, the novelty index, indicating the similarity of the test case to the training case, allows the user to assess the confidence level of the prediction with regard to how much the new data differ from the data originally used for the development of the prediction tool. State-of-the-art, machine-learning methods can be employed for the development of sophisticated tools to aid clinicians' decisions. We identified numerous variables considered relevant for extubation decisions for mechanically ventilated premature infants with RDS. We then developed a web-based decision-support tool for clinicians which can be made widely available and potentially improve patient care world wide.

Developing a Model of Compulsory Basic Education Completion Acceleration in Support of Millennium Development Goals in Magelang, Indonesia

ERIC Educational Resources Information Center

Sukarno; Haryati, Sri

2015-01-01

This article reports Year One of a two-year study to develop a model to accelerate compulsory basic education completion toward Millennium Development Goals (MDGs) in Magelang, Indonesia. The study focuses on five issues: (1) profile of MDGs in Magelang, (2) achievement of MDGs, (3) problems in MDGs implementation, (4) model of compulsary basic…

Involving Clients in Welfare Policy-making.

ERIC Educational Resources Information Center

O'Donnell, Sandra

1993-01-01

Describes how, through support of private philanthropy, welfare recipients have been involved in implementing welfare-to-work policy, including Job Opportunities in Business Sector provisions of Family Support Act, in Illinois since 1986. Describes client roles in problem formulation, model program development, policy development, and policy…

Technology-Supported Change: A Staff Development Opportunity.

ERIC Educational Resources Information Center

Bradshaw, Lynn K.

1997-01-01

Implementing technology in a classroom is a personal process that varies from teacher to teacher. The Concerns-Based Adoption Model identifies seven stages of concern that teachers may experience, from awareness to refocusing ideas. Innovative staff development strategies include establishing organizational structures to support technological and…

An Integrated Approach to Laser Crystal Development

NASA Technical Reports Server (NTRS)

Ries, Heidi R.

1996-01-01

Norfolk State University has developed an integrated research program in the area of laser crystal development, including crystal modeling, crystal growth, spectroscopy, and laser modeling. This research program supports a new graduate program in Chemical Physics, designed in part to address the shortage of minority scientists.

Development of Support Service for Prevention and Recovery from Dementia and Science of Lethe

NASA Astrophysics Data System (ADS)

Otake, Mihoko

Purpose of this study is to explore service design method through the development of support service for prevention and recovery from dementia towards science of lethe. We designed and implemented conversation support service via coimagination method based on multiscale service design method, both were proposed by the author. Multiscale service model consists of tool, event, human, network, style and rule. Service elements at different scales are developed according to the model. Interactive conversation supported by coimagination method activates cognitive functions so as to prevent progress of dementia. This paper proposes theoretical bases for science of lethe. Firstly, relationship among coimagination method and three cognitive functions including division of attention, planning, episodic memory which decline at mild cognitive imparement. Secondly, thought state transition model during conversation which describes cognitive enhancement via interactive communication. Thirdly, Set Theoretical Measure of Interaction is proposed for evaluating effectiveness of conversation to cognitive enhancement. Simulation result suggests that the ideas which cannot be explored by each speaker are explored during interactive conversation. Finally, coimagination method compared with reminiscence therapy and its possibility for collaboration is discussed.

Information engineering for molecular diagnostics.

PubMed Central

Sorace, J. M.; Ritondo, M.; Canfield, K.

1994-01-01

Clinical laboratories are beginning to apply the recent advances in molecular biology to the testing of patient samples. The emerging field of Molecular Diagnostics will require a new Molecular Diagnostics Laboratory Information System which handles the data types, samples and test methods found in this field. The system must be very flexible in regards to supporting ad-hoc queries. The requirements which are shaping the developments in this field are reviewed and a data model developed. Several queries which demonstrate the data models ability to support the information needs of this area have been developed and run. These results demonstrate the ability of the purposed data model to meet the current and projected needs of this rapidly expanding field. PMID:7949937

P80 SRM low torque flex-seal development - thermal and chemical modeling of molding process

NASA Astrophysics Data System (ADS)

Descamps, C.; Gautronneau, E.; Rousseau, G.; Daurat, M.

2009-09-01

The development of the flex-seal component of the P80 nozzle gave the opportunity to set up new design and manufacturing process methods. Due to the short development lead time required by VEGA program, the usual manufacturing iterative tests work flow, which is usually time consuming, had to be enhanced in order to use a more predictive approach. A newly refined rubber vulcanization description was built up and identified on laboratory samples. This chemical model was implemented in a thermal analysis code. The complete model successfully supports the manufacturing processes. These activities were conducted with the support of ESA/CNES Research & Technologies and DGA (General Delegation for Armament).

Work stress, role conflict, social support, and psychological burnout among teachers.

PubMed

Burke, R J; Greenglass, E

1993-10-01

This study examined a research model developed to understand psychological burnout among school-based educators. Data were collected from 833 school-based educators using questionnaires completed anonymously. Four groups of predictor variables identified in previous research were considered: individual demographic and situational variables, work stressors, role conflict, and social support. Some support for the model was found. Work stressors were strong predictors of psychological burnout. Individual demographic characteristics, role conflict, and social support had little effect on psychological burnout.

Implementing new models of care: Lessons from the new care models programme in England.

PubMed

Starling, Anna

2018-06-01

In 2014, the body that leads the National Health Service in England published a new strategic vision for the National Health Service. A major part of this strategy was a three-year-long national programme to develop new care models to coordinate care across primary care, community services and hospitals that could be replicated across the country. Local 'vanguard sites' were selected to develop five types of new care model with support from a national team. The new care models programme provided support for local leaders to enable them to collaborate to improve care for their local populations. We interviewed leaders in the vanguard sites to better understand how they made changes to care locally. Drawing on the insights from these interviews and the literature on cross-organisational change and improvement we devised a framework of 10 lessons for health and care leaders seeking to develop and implement new models of care. The framework emphasises the importance of developing relationships and building capability locally to enable areas to continuously develop and test new ideas.

Analytical model for tilting proprotor aircraft dynamics, including blade torsion and coupled bending modes, and conversion mode operation

NASA Technical Reports Server (NTRS)

Johnson, W.

1974-01-01

An analytical model is developed for proprotor aircraft dynamics. The rotor model includes coupled flap-lag bending modes, and blade torsion degrees of freedom. The rotor aerodynamic model is generally valid for high and low inflow, and for axial and nonaxial flight. For the rotor support, a cantilever wing is considered; incorporation of a more general support with this rotor model will be a straight-forward matter.

A Model Framework for Course Materials Construction (Second Edition).

ERIC Educational Resources Information Center

Schlenker, Richard M.

Designed for use by Coast Guard course writers, curriculum developers, course coordinators, and instructors as a decision-support system, this publication presents a model that translates the Intraservices Procedures for Instructional Systems Development curriculum design model into materials usable by classroom teachers and students. Although…

Model Diagnostics for the Department of Energy's Accelerated Climate Modeling for Energy (ACME) Project

NASA Astrophysics Data System (ADS)

Smith, B.

2015-12-01

In 2014, eight Department of Energy (DOE) national laboratories, four academic institutions, one company, and the National Centre for Atmospheric Research combined forces in a project called Accelerated Climate Modeling for Energy (ACME) with the goal to speed Earth system model development for climate and energy. Over the planned 10-year span, the project will conduct simulations and modeling on DOE's most powerful high-performance computing systems at Oak Ridge, Argonne, and Lawrence Berkeley Leadership Compute Facilities. A key component of the ACME project is the development of an interactive test bed for the advanced Earth system model. Its execution infrastructure will accelerate model development and testing cycles. The ACME Workflow Group is leading the efforts to automate labor-intensive tasks, provide intelligent support for complex tasks and reduce duplication of effort through collaboration support. As part of this new workflow environment, we have created a diagnostic, metric, and intercomparison Python framework, called UVCMetrics, to aid in the testing-to-production execution of the ACME model. The framework exploits similarities among different diagnostics to compactly support diagnosis of new models. It presently focuses on atmosphere and land but is designed to support ocean and sea ice model components as well. This framework is built on top of the existing open-source software framework known as the Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT). Because of its flexible framework design, scientists and modelers now can generate thousands of possible diagnostic outputs. These diagnostics can compare model runs, compare model vs. observation, or simply verify a model is physically realistic. Additional diagnostics are easily integrated into the framework, and our users have already added several. Diagnostics can be generated, viewed, and manipulated from the UV-CDAT graphical user interface, Python command line scripts and programs, and web browsers. The framework is designed to be scalable to large datasets, yet easy to use and familiar to scientists using previous tools. Integration in the ACME overall user interface facilitates data publication, further analysis, and quick feedback to model developers and scientists making component or coupled model runs.

Your New Role in the Organizational Drama: Measuring Effectiveness.

ERIC Educational Resources Information Center

Chalofsky, Neal E.; Reinhart, Carlene

1988-01-01

Presents a research-based model for human resource development effectiveness. Model standards specify that the HRD function has (1) the ability to diagnose problems, (2) the support of the corporate mission and culture, (3) a commitment to strategic planning and support for organizational change, (4) clearly defined staff roles and…

The Support-Stress Paradigm and Faculty Research Publication.

ERIC Educational Resources Information Center

Neumann, Yorem; Finaly-Neumann, Edith

1990-01-01

A study developed and tested a model that examines the relative powers of support and work stress indicators in explaining faculty research productivity. Empirical examination indicates the model is most influential in physics, least in education, and that different indicators are significant in determining publication in hard and soft sciences.…

Preliminary evaluation of AERMOD using site specific stack and ambient sampling data

USDA-ARS?s Scientific Manuscript database

A cotton ginning industry-supported project was initiated in 2008 to develop a robust particulate matter (PM) dispersion modeling dataset that could be used for evaluating current and future PM dispersion models. This paper compares total PM data collected by the industry-supported study at one gin ...

Screening in School-Wide Positive Behavior Supports: Methodological Comparisons

ERIC Educational Resources Information Center

Hall, Morgan

2012-01-01

Many schools have adopted programming designed to promote students' behavioral aptitude. A specific type of programming with this focus is School Wide Positive Behavior Supports (SWPBS), which combines positive behavior techniques with a system wide problem solving model. Aspects of this model are still being developed in the research…

AN OPEN-SOURCE COMMUNITY WEB SITE TO SUPPORT GROUND-WATER MODEL TESTING

EPA Science Inventory

A community wiki wiki web site has been created as a resource to support ground-water model development and testing. The Groundwater Gourmet wiki is a repository for user supplied analytical and numerical recipes, how-to's, and examples. Members are encouraged to submit analyti...

OASIS: PARAMETER ESTIMATION SYSTEM FOR AQUIFER RESTORATION MODELS, USER'S MANUAL VERSION 2.0

EPA Science Inventory

OASIS, a decision support system for ground water contaminant modeling, has been developed for the CPA by Rice University, through the National Center for Ground Water Research. As a decision support system, OASIS was designed to provide a set of tools which will help scientists ...

Understanding the Codevelopment of Modeling Practice and Ecological Knowledge

ERIC Educational Resources Information Center

Manz, Eve

2012-01-01

Despite a recent focus on engaging students in epistemic practices, there is relatively little research on how learning environments can support the simultaneous, coordinated development of both practice and the knowledge that emerges from and supports scientific activity. This study reports on the co-construction of modeling practice and…

Exploring a model-driven architecture (MDA) approach to health care information systems development.

PubMed

Raghupathi, Wullianallur; Umar, Amjad

2008-05-01

To explore the potential of the model-driven architecture (MDA) in health care information systems development. An MDA is conceptualized and developed for a health clinic system to track patient information. A prototype of the MDA is implemented using an advanced MDA tool. The UML provides the underlying modeling support in the form of the class diagram. The PIM to PSM transformation rules are applied to generate the prototype application from the model. The result of the research is a complete MDA methodology to developing health care information systems. Additional insights gained include development of transformation rules and documentation of the challenges in the application of MDA to health care. Design guidelines for future MDA applications are described. The model has the potential for generalizability. The overall approach supports limited interoperability and portability. The research demonstrates the applicability of the MDA approach to health care information systems development. When properly implemented, it has the potential to overcome the challenges of platform (vendor) dependency, lack of open standards, interoperability, portability, scalability, and the high cost of implementation.

Effects of social support and battle intensity on loneliness and breakdown during combat.

PubMed

Solomon, Z; Mikulincer, M; Hobfoll, S E

1986-12-01

A sample of 382 Israeli soldiers who developed combat stress reactions (CSR) during the 1982 Israel-Lebanon War were compared with groups of carefully matched controls who did not develop CSR. Lack of social support from officers was found to be related to greater feelings of loneliness and greater likelihood of CSR in soldiers. Lack of social support from buddies was found to be related to greater loneliness. Intensity of battle was also found to be related to greater feelings of loneliness and increased likelihood of CSR. A path model was tested and supported. The model suggests that battle intensity and officer support lead to CSR directly and indirectly by causing increased feelings of loneliness. Possible cognitive and psychodynamic explanations for the findings are offered. The limitations of making causal statements from retrospective perceptions is discussed.

Operator models for delivering municipal solid waste management services in developing countries: Part B: Decision support.

PubMed

Soós, Reka; Whiteman, Andrew D; Wilson, David C; Briciu, Cosmin; Nürnberger, Sofia; Oelz, Barbara; Gunsilius, Ellen; Schwehn, Ekkehard

2017-08-01

This is the second of two papers reporting the results of a major study considering 'operator models' for municipal solid waste management (MSWM) in emerging and developing countries. Part A documents the evidence base, while Part B presents a four-step decision support system for selecting an appropriate operator model in a particular local situation. Step 1 focuses on understanding local problems and framework conditions; Step 2 on formulating and prioritising local objectives; and Step 3 on assessing capacities and conditions, and thus identifying strengths and weaknesses, which underpin selection of the operator model. Step 4A addresses three generic questions, including public versus private operation, inter-municipal co-operation and integration of services. For steps 1-4A, checklists have been developed as decision support tools. Step 4B helps choose locally appropriate models from an evidence-based set of 42 common operator models ( coms); decision support tools here are a detailed catalogue of the coms, setting out advantages and disadvantages of each, and a decision-making flowchart. The decision-making process is iterative, repeating steps 2-4 as required. The advantages of a more formal process include avoiding pre-selection of a particular com known to and favoured by one decision maker, and also its assistance in identifying the possible weaknesses and aspects to consider in the selection and design of operator models. To make the best of whichever operator models are selected, key issues which need to be addressed include the capacity of the public authority as 'client', management in general and financial management in particular.

A pulsed eddy current probe for inspection of support plates from within Alloy-800 steam generator tubes

NASA Astrophysics Data System (ADS)

Krause, T. W.; Babbar, V. K.; Underhill, P. R.

2014-02-01

Support plate degradation and fouling in nuclear steam generators (SGs) can lead to SG tube corrosion and loss of efficiency. Inspection and monitoring of these conditions can be integrated with preventive maintenance programs, thereby advancing station-life management processes. A prototype pulsed eddy current (PEC) probe, targeting inspection issues associated with SG tubes in SS410 tube support plate structures, has been developed using commercial finite element (FE) software. FE modeling was used to identify appropriate driver and pickup coil configurations for optimum sensitivity to changes in gap and offset for Alloy-800 SG tubes passing through 25 mm thick SS410 support plates. Experimental measurements using a probe that was manufactured based on the modeled configuration, were used to confirm the sensitivity of differential PEC signals to changes in relative position of the tube within the tube support plate holes. Models investigated the effect of shift and tilt of tube with respect to hole centers. Near hole centers and for small shifts, modeled signal amplitudes from the differentially connected coil pairs were observed to change linearly with tube shift. This was in agreement with experimentally measured TEC coil response. The work paves the way for development of a system targeting the inspection and evaluation of support plate structures in steam generators.

Automated CPX support system preliminary design phase

NASA Technical Reports Server (NTRS)

Bordeaux, T. A.; Carson, E. T.; Hepburn, C. D.; Shinnick, F. M.

1984-01-01

The development of the Distributed Command and Control System (DCCS) is discussed. The development of an automated C2 system stimulated the development of an automated command post exercise (CPX) support system to provide a more realistic stimulus to DCCS than could be achieved with the existing manual system. An automated CPX system to support corps-level exercise was designed. The effort comprised four tasks: (1) collecting and documenting user requirements; (2) developing a preliminary system design; (3) defining a program plan; and (4) evaluating the suitability of the TRASANA FOURCE computer model.

Building Better Beginnings: A Case Study of How a Daily Physical Skills Session Is Supporting Overall Learning and Development for Young Boys

ERIC Educational Resources Information Center

Chalke, Joy

2016-01-01

This case study argues for the consideration of an adult-directed physical skills session as an approach to supporting boys learning in the Early Years Foundation Stage in England. It exemplifies a model of professional development that utilises the individual knowledge and expertise of practitioners to support and extend others' practice. It…

Labyrinth Seal Analysis. Volume 3. Analytical and Experimental Development of a Design Model for Labyrinth Seals

DTIC Science & Technology

1986-01-01

the information that has been determined experimentally. The Labyrinth Seal Analysis program was, therefore, directed to the develop - ment of an...labyrinth seal performance, the program included the development of an improved empirical design model to pro- j. .,’ vide the calculation of the flow... program . * Phase I was directed to the analytical development of both an *analysis* model and an improvwd empirical *design" model. Supporting rig tests

Data Services in Support of High Performance Computing-Based Distributed Hydrologic Models

NASA Astrophysics Data System (ADS)

Tarboton, D. G.; Horsburgh, J. S.; Dash, P. K.; Gichamo, T.; Yildirim, A. A.; Jones, N.

2014-12-01

We have developed web-based data services to support the application of hydrologic models on High Performance Computing (HPC) systems. The purposes of these services are to provide hydrologic researchers, modelers, water managers, and users access to HPC resources without requiring them to become HPC experts and understanding the intrinsic complexities of the data services, so as to reduce the amount of time and effort spent in finding and organizing the data required to execute hydrologic models and data preprocessing tools on HPC systems. These services address some of the data challenges faced by hydrologic models that strive to take advantage of HPC. Needed data is often not in the form needed by such models, requiring researchers to spend time and effort on data preparation and preprocessing that inhibits or limits the application of these models. Another limitation is the difficult to use batch job control and queuing systems used by HPC systems. We have developed a REST-based gateway application programming interface (API) for authenticated access to HPC systems that abstracts away many of the details that are barriers to HPC use and enhances accessibility from desktop programming and scripting languages such as Python and R. We have used this gateway API to establish software services that support the delineation of watersheds to define a modeling domain, then extract terrain and land use information to automatically configure the inputs required for hydrologic models. These services support the Terrain Analysis Using Digital Elevation Model (TauDEM) tools for watershed delineation and generation of hydrology-based terrain information such as wetness index and stream networks. These services also support the derivation of inputs for the Utah Energy Balance snowmelt model used to address questions such as how climate, land cover and land use change may affect snowmelt inputs to runoff generation. To enhance access to the time varying climate data used to drive hydrologic models, we have developed services to downscale and re-grid nationally available climate analysis data from systems such as NLDAS and MERRA. These cases serve as examples for how this approach can be extended to other models to enhance the use of HPC for hydrologic modeling.

Traffic modeling of transit oriented development : evaluation of transit friendly strategies and innovative intersection designs in West Valley City, UT.

DOT National Transportation Integrated Search

2014-07-01

Street networks designed to support Transit Oriented Development (TOD) increase accessibility for non-motorized traffic. However, the implications of TOD supportive networks for still dominant vehicular : traffic are rarely addressed. Due to this lac...

Developing a Statewide Childhood Body Mass Index Surveillance Program

ERIC Educational Resources Information Center

Paul, David R.; Scruggs, Philip W.; Goc Karp, Grace; Ransdell, Lynda B.; Robinson, Clay; Lester, Michael J.; Gao, Yong; Petranek, Laura J.; Brown, Helen; Shimon, Jane M.

2014-01-01

Background: Several states have implemented childhood obesity surveillance programs supported by legislation. Representatives from Idaho wished to develop a model for childhood obesity surveillance without the support of state legislation, and subsequently report predictors of overweight and obesity in the state. Methods: A coalition comprised of…

The Five Attributes of a Supportive Midwifery Practice Climate: A Review of the Literature.

PubMed

Thumm, E Brie; Flynn, Linda

2018-01-01

A supportive work climate is associated with decreased burnout and attrition, and increased job satisfaction and employee health. A review of the literature was conducted in order to determine the unique attributes of a supportive practice climate for midwives. The midwifery literature was reviewed and synthesized using concept analysis technique guided by literature from related professions. The search was conducted primarily in PubMed, CINAHL, Web of Science, and Google Scholar. Articles were included if they were conducted between 2006 and 2016 and addressed perceptions of the midwifery practice climate as it related to patient, provider, and organizational outcomes. The literature identified 5 attributes consistent with a supportive midwifery practice climate: effective leadership, adequate resources, collaboration, control of one's work, and support of the midwifery model of care. Effective leadership styles include situational and transformational, and 9 traits of effective leaders are specified. Resources consist of time, personnel, supplies, and equipment. Collaboration encompasses relationships with all members of the health care team, including midwives inside and outside of one's practice. Additionally, the patients are considered collaborating members of the team. Characteristics of effective collaboration include a shared vision, role clarity, and respectful communication. Support for the midwifery model of care includes value congruence, developing relationships with women, and providing high-quality care. The attributes of a supportive midwifery practice climate are generally consistent with theoretical models of supportive practice climates of advanced practice nurses and physicians, with the exception of a more inclusive definition of collaboration and support of the midwifery model of care. The proposed Midwifery Practice Climate Model can guide instrument development, determining relationships between the attributes of the practice climate and outcomes, and creating interventions to improve the practice climate, workforce stability, and patient outcomes. © 2018 by the American College of Nurse-Midwives.

Why don't you exercise? Development of the Amotivation Toward Exercise Scale among older inactive individuals.

PubMed

Vlachopoulos, Symeon P; Gigoudi, Maria A

2008-07-01

This article reports on the development and initial validation of the Amotivation Toward Exercise Scale (ATES), which reflects a taxonomy of older adults' reasons to refrain from exercise. Drawing on work by Pelletier, Dion, Tuson, and Green-Demers (1999) and Legault, Green-Demers, and Pelletier (2006), these dimensions were the outcome beliefs, capacity beliefs, effort beliefs, and value amotivation beliefs toward exercise. The results supported a 4-factor correlated model that fit the data better than either a unidimensional model or a 4-factor uncorrelated model or a hierarchical model with strong internal reliability for all the subscales. Evidence also emerged for the discriminant validity of the subscale scores. Furthermore, the predictive validity of the subscale scores was supported, and satisfactory measurement invariance was demonstrated across the calibration and validation samples, supporting the generalizability of the scale's measurement properties.

Using CONFIG for Simulation of Operation of Water Recovery Subsystems for Advanced Control Software Evaluation

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Flores, Luis; Fleming, Land; Throop, Daiv

2002-01-01

A hybrid discrete/continuous simulation tool, CONFIG, has been developed to support evaluation of the operability life support systems. CON FIG simulates operations scenarios in which flows and pressures change continuously while system reconfigurations occur as discrete events. In simulations, intelligent control software can interact dynamically with hardware system models. CONFIG simulations have been used to evaluate control software and intelligent agents for automating life support systems operations. A CON FIG model of an advanced biological water recovery system has been developed to interact with intelligent control software that is being used in a water system test at NASA Johnson Space Center

Supportive group action for women: a self-help strategy.

PubMed

Stewart, M

1983-09-01

A major goal of the demonstration project described was to test a model of self-help and voluntary support in developing groups for female single parents. Community meetings, study programs, and related experiential strategies were used to promote coping skills and strategies; access to resources; decision-making learning and responsibility; social contacts and networking; work skills and employment opportunities. The effectiveness of the model, which emphasized self-help, consumer power, and accessibility, was reflected in increased membership, self-awareness and confidence, leadership, employment and development of community resources. Initial individual contact, informal contracting, and community support were seen as important factors in the project's success.

Suicide prevention by online support groups: an action theory-based model of emotional first aid.

PubMed

Gilat, Itzhak; Shahar, Golan

2009-01-01

In the last two decades, online support groups have become a valuable source of help for individuals in suicidal crisis. Their attractiveness is attributed to features that enhance help-seeking and self-disclosure such as availability, anonymity, and use of written communication. However, online support groups also suffer from limitations and potential risks as agents of suicide prevention. The Israeli Association for Emotional First Aid (ERAN) has developed a practical model that seeks to maximize the benefits and minimize the risks of online suicide prevention. The model applies the Action Theory concepts whereby individuals shape their own environment. The present paper presents the model, which is based on an online support group combined with personal chat and a telephonic help line. The online support group is moderated by paraprofessionals who function as both process regulators and support providers. The principles and practice of the model are described, the theoretical rationale is presented, and directions for future research are suggested.

The development of a model and decision support system to use in forecasting truck freight flow in the continental United States

DOT National Transportation Integrated Search

2001-01-01

This research develops a regression-based model for forecasting truck borne freight in the continental United States. This model is capable of predicting freight commodity flow information via trucks to assist transportation planners who wish to unde...

Problem Solving Model for Science Learning

NASA Astrophysics Data System (ADS)

Alberida, H.; Lufri; Festiyed; Barlian, E.

2018-04-01

This research aims to develop problem solving model for science learning in junior high school. The learning model was developed using the ADDIE model. An analysis phase includes curriculum analysis, analysis of students of SMP Kota Padang, analysis of SMP science teachers, learning analysis, as well as the literature review. The design phase includes product planning a science-learning problem-solving model, which consists of syntax, reaction principle, social system, support system, instructional impact and support. Implementation of problem-solving model in science learning to improve students' science process skills. The development stage consists of three steps: a) designing a prototype, b) performing a formative evaluation and c) a prototype revision. Implementation stage is done through a limited trial. A limited trial was conducted on 24 and 26 August 2015 in Class VII 2 SMPN 12 Padang. The evaluation phase was conducted in the form of experiments at SMPN 1 Padang, SMPN 12 Padang and SMP National Padang. Based on the development research done, the syntax model problem solving for science learning at junior high school consists of the introduction, observation, initial problems, data collection, data organization, data analysis/generalization, and communicating.

Recent Achievements of the Collaboratory for the Study of Earthquake Predictability

NASA Astrophysics Data System (ADS)

Jordan, T. H.; Liukis, M.; Werner, M. J.; Schorlemmer, D.; Yu, J.; Maechling, P. J.; Jackson, D. D.; Rhoades, D. A.; Zechar, J. D.; Marzocchi, W.

2016-12-01

The Collaboratory for the Study of Earthquake Predictability (CSEP) supports a global program to conduct prospective earthquake forecasting experiments. CSEP testing centers are now operational in California, New Zealand, Japan, China, and Europe with 442 models under evaluation. The California testing center, started by SCEC, Sept 1, 2007, currently hosts 30-minute, 1-day, 3-month, 1-year and 5-year forecasts, both alarm-based and probabilistic, for California, the Western Pacific, and worldwide. Our tests are now based on the hypocentral locations and magnitudes of cataloged earthquakes, but we plan to test focal mechanisms, seismic hazard models, ground motion forecasts, and finite rupture forecasts as well. We have increased computational efficiency for high-resolution global experiments, such as the evaluation of the Global Earthquake Activity Rate (GEAR) model, introduced Bayesian ensemble models, and implemented support for non-Poissonian simulation-based forecasts models. We are currently developing formats and procedures to evaluate externally hosted forecasts and predictions. CSEP supports the USGS program in operational earthquake forecasting and a DHS project to register and test external forecast procedures from experts outside seismology. We found that earthquakes as small as magnitude 2.5 provide important information on subsequent earthquakes larger than magnitude 5. A retrospective experiment for the 2010-2012 Canterbury earthquake sequence showed that some physics-based and hybrid models outperform catalog-based (e.g., ETAS) models. This experiment also demonstrates the ability of the CSEP infrastructure to support retrospective forecast testing. Current CSEP development activities include adoption of the Comprehensive Earthquake Catalog (ComCat) as an authorized data source, retrospective testing of simulation-based forecasts, and support for additive ensemble methods. We describe the open-source CSEP software that is available to researchers as they develop their forecast models. We also discuss how CSEP procedures are being adapted to intensity and ground motion prediction experiments as well as hazard model testing.

Development of a web service for analysis in a distributed network.

PubMed

Jiang, Xiaoqian; Wu, Yuan; Marsolo, Keith; Ohno-Machado, Lucila

2014-01-01

We describe functional specifications and practicalities in the software development process for a web service that allows the construction of the multivariate logistic regression model, Grid Logistic Regression (GLORE), by aggregating partial estimates from distributed sites, with no exchange of patient-level data. We recently developed and published a web service for model construction and data analysis in a distributed environment. This recent paper provided an overview of the system that is useful for users, but included very few details that are relevant for biomedical informatics developers or network security personnel who may be interested in implementing this or similar systems. We focus here on how the system was conceived and implemented. We followed a two-stage development approach by first implementing the backbone system and incrementally improving the user experience through interactions with potential users during the development. Our system went through various stages such as concept proof, algorithm validation, user interface development, and system testing. We used the Zoho Project management system to track tasks and milestones. We leveraged Google Code and Apache Subversion to share code among team members, and developed an applet-servlet architecture to support the cross platform deployment. During the development process, we encountered challenges such as Information Technology (IT) infrastructure gaps and limited team experience in user-interface design. We figured out solutions as well as enabling factors to support the translation of an innovative privacy-preserving, distributed modeling technology into a working prototype. Using GLORE (a distributed model that we developed earlier) as a pilot example, we demonstrated the feasibility of building and integrating distributed modeling technology into a usable framework that can support privacy-preserving, distributed data analysis among researchers at geographically dispersed institutes.

Development of a Web Service for Analysis in a Distributed Network

PubMed Central

Jiang, Xiaoqian; Wu, Yuan; Marsolo, Keith; Ohno-Machado, Lucila

2014-01-01

Objective: We describe functional specifications and practicalities in the software development process for a web service that allows the construction of the multivariate logistic regression model, Grid Logistic Regression (GLORE), by aggregating partial estimates from distributed sites, with no exchange of patient-level data. Background: We recently developed and published a web service for model construction and data analysis in a distributed environment. This recent paper provided an overview of the system that is useful for users, but included very few details that are relevant for biomedical informatics developers or network security personnel who may be interested in implementing this or similar systems. We focus here on how the system was conceived and implemented. Methods: We followed a two-stage development approach by first implementing the backbone system and incrementally improving the user experience through interactions with potential users during the development. Our system went through various stages such as concept proof, algorithm validation, user interface development, and system testing. We used the Zoho Project management system to track tasks and milestones. We leveraged Google Code and Apache Subversion to share code among team members, and developed an applet-servlet architecture to support the cross platform deployment. Discussion: During the development process, we encountered challenges such as Information Technology (IT) infrastructure gaps and limited team experience in user-interface design. We figured out solutions as well as enabling factors to support the translation of an innovative privacy-preserving, distributed modeling technology into a working prototype. Conclusion: Using GLORE (a distributed model that we developed earlier) as a pilot example, we demonstrated the feasibility of building and integrating distributed modeling technology into a usable framework that can support privacy-preserving, distributed data analysis among researchers at geographically dispersed institutes. PMID:25848586

Using Modeling and Simulation to Predict Operator Performance and Automation-Induced Complacency With Robotic Automation: A Case Study and Empirical Validation.

PubMed

Wickens, Christopher D; Sebok, Angelia; Li, Huiyang; Sarter, Nadine; Gacy, Andrew M

2015-09-01

The aim of this study was to develop and validate a computational model of the automation complacency effect, as operators work on a robotic arm task, supported by three different degrees of automation. Some computational models of complacency in human-automation interaction exist, but those are formed and validated within the context of fairly simplified monitoring failures. This research extends model validation to a much more complex task, so that system designers can establish, without need for human-in-the-loop (HITL) experimentation, merits and shortcomings of different automation degrees. We developed a realistic simulation of a space-based robotic arm task that could be carried out with three different levels of trajectory visualization and execution automation support. Using this simulation, we performed HITL testing. Complacency was induced via several trials of correctly performing automation and then was assessed on trials when automation failed. Following a cognitive task analysis of the robotic arm operation, we developed a multicomponent model of the robotic operator and his or her reliance on automation, based in part on visual scanning. The comparison of model predictions with empirical results revealed that the model accurately predicted routine performance and predicted the responses to these failures after complacency developed. However, the scanning models do not account for the entire attention allocation effects of complacency. Complacency modeling can provide a useful tool for predicting the effects of different types of imperfect automation. The results from this research suggest that focus should be given to supporting situation awareness in automation development. © 2015, Human Factors and Ergonomics Society.

A Clinical Nurse Leader (CNL) practice development model to support integration of the CNL role into microsystem care delivery.

PubMed

Kaack, Lorraine; Bender, Miriam; Finch, Michael; Borns, Linda; Grasham, Katherine; Avolio, Alice; Clausen, Shawna; Terese, Nadine A; Johnstone, Diane; Williams, Marjory

The Veterans Health Administration (VHA) Office of Nursing Services (ONS) was an early adopter of Clinical Nurse Leader (CNL) practice, generating some of the earliest pilot data of CNL practice effectiveness. In 2011 the VHA ONS CNL Implementation & Evaluation Service (CNL I&E) piloted a curriculum to facilitate CNL transition to effective practice at local VHA settings. In 2015, the CNL I&E and local VHA setting stakeholders collaborated to refine the program, based on lessons learned at the national and local level. The workgroup reviewed the literature to identify theoretical frameworks for CNL practice and practice development. The workgroup selected Benner et al.'s Novice-to-Expert model as the defining framework for CNL practice development, and Bender et al.'s CNL Practice Model as the defining framework for CNL practice integration. The selected frameworks were cross-walked against existing curriculum elements to identify and clarify additional practice development needs. The work generated key insights into: core stages of transition to effective practice; CNL progress and expectations for each stage; and organizational support structures necessary for CNL success at each stage. The refined CNL development model is a robust tool that can be applied to support consistent and effective integration of CNL practice into care delivery. Published by Elsevier Inc.

Decision insight into stakeholder conflict for ERN.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siirola, John; Tidwell, Vincent Carroll; Benz, Zachary O.

Participatory modeling has become an important tool in facilitating resource decision making and dispute resolution. Approaches to modeling that are commonly used in this context often do not adequately account for important human factors. Current techniques provide insights into how certain human activities and variables affect resource outcomes; however, they do not directly simulate the complex variables that shape how, why, and under what conditions different human agents behave in ways that affect resources and human interactions related to them. Current approaches also do not adequately reveal how the effects of individual decisions scale up to have systemic level effectsmore » in complex resource systems. This lack of integration prevents the development of more robust models to support decision making and dispute resolution processes. Development of integrated tools is further hampered by the fact that collection of primary data for decision-making modeling is costly and time consuming. This project seeks to develop a new approach to resource modeling that incorporates both technical and behavioral modeling techniques into a single decision-making architecture. The modeling platform is enhanced by use of traditional and advanced processes and tools for expedited data capture. Specific objectives of the project are: (1) Develop a proof of concept for a new technical approach to resource modeling that combines the computational techniques of system dynamics and agent based modeling, (2) Develop an iterative, participatory modeling process supported with traditional and advance data capture techniques that may be utilized to facilitate decision making, dispute resolution, and collaborative learning processes, and (3) Examine potential applications of this technology and process. The development of this decision support architecture included both the engineering of the technology and the development of a participatory method to build and apply the technology. Stakeholder interaction with the model and associated data capture was facilitated through two very different modes of engagement, one a standard interface involving radio buttons, slider bars, graphs and plots, while the other utilized an immersive serious gaming interface. The decision support architecture developed through this project was piloted in the Middle Rio Grande Basin to examine how these tools might be utilized to promote enhanced understanding and decision-making in the context of complex water resource management issues. Potential applications of this architecture and its capacity to lead to enhanced understanding and decision-making was assessed through qualitative interviews with study participants who represented key stakeholders in the basin.« less

Large Deployable Reflector (LDR) thermal characteristics

NASA Technical Reports Server (NTRS)

Miyake, R. N.; Wu, Y. C.

1988-01-01

The thermal support group, which is part of the lightweight composite reflector panel program, developed thermal test and analysis evaluation tools necessary to support the integrated interdisciplinary analysis (IIDA) capability. A detailed thermal mathematical model and a simplified spacecraft thermal math model were written. These models determine the orbital temperature level and variation, and the thermally induced gradients through and across a panel, for inclusion in the IIDA.

Dynamic testing for shuttle design verification

NASA Technical Reports Server (NTRS)

Green, C. E.; Leadbetter, S. A.; Rheinfurth, M. H.

1972-01-01

Space shuttle design verification requires dynamic data from full scale structural component and assembly tests. Wind tunnel and other scaled model tests are also required early in the development program to support the analytical models used in design verification. Presented is a design philosophy based on mathematical modeling of the structural system strongly supported by a comprehensive test program; some of the types of required tests are outlined.

Set-up of a decision support system to support sustainable development of the Laguna de Bay, Philippines.

PubMed

Nauta, Tjitte A; Bongco, Alicia E; Santos-Borja, Adelina C

2003-01-01

Over recent decades, population expansion, deforestation, land conversion, urbanisation, intense fisheries and industrialisation have produced massive changes in the Laguna de Bay catchment, Philippines. The resulting problems include rapid siltation of the lake, eutrophication, inputs of toxics, flooding problems and loss of biodiversity. Rational and systematic resolution of conflicting water use and water allocation interests is now urgently needed in order to ensure sustainable use of the water resources. With respect to the competing and conflicting pressures on the water resources, the Laguna Lake Development Authority (LLDA) needs to achieve comprehensive management and development of the area. In view of these problems and needs, the Government of the Netherlands was funding a two-year project entitled 'Sustainable Development of the Laguna de Bay Environment'.A comprehensive tool has been developed to support decision-making at catchment level. This consists of an ArcView GIS-database linked to a state-of-the-art modelling suite, including hydrological and waste load models for the catchment area and a three-dimensional hydrodynamic and water quality model (Delft3D) linked to a habitat evaluation module for the lake. In addition, MS Office based tools to support a stakeholder analysis and financial and economic assessments have been developed. The project also focused on technical studies relating to dredging, drinking water supply and infrastructure works. These aimed to produce technically and economically feasible solutions to water quantity and quality problems. The paper also presents the findings of a study on the development of polder islands in the Laguna de Bay, addressing the water quantity and quality problems and focusing on the application of the decision support system.

A Planning and Assessment Model for Developing Effective CMS Support

ERIC Educational Resources Information Center

Johnson, Douglas F.

2004-01-01

At the University of Florida, in Spring 2003, more than 32,000 individuals enrolled in courses using the centrally-supported Course Management System (CMS). Because less than 1 full time equivalent (FTE) was allocated to support the CMS, this created problems for both users and support providers. In the face of rapid growth, support resources for…

Verification of a computational cardiovascular system model comparing the hemodynamics of a continuous flow to a synchronous valveless pulsatile flow left ventricular assist device.

PubMed

Gohean, Jeffrey R; George, Mitchell J; Pate, Thomas D; Kurusz, Mark; Longoria, Raul G; Smalling, Richard W

2013-01-01

The purpose of this investigation is to use a computational model to compare a synchronized valveless pulsatile left ventricular assist device with continuous flow left ventricular assist devices at the same level of device flow, and to verify the model with in vivo porcine data. A dynamic system model of the human cardiovascular system was developed to simulate the support of a healthy or failing native heart from a continuous flow left ventricular assist device or a synchronous pulsatile valveless dual-piston positive displacement pump. These results were compared with measurements made during in vivo porcine experiments. Results from the simulation model and from the in vivo counterpart show that the pulsatile pump provides higher cardiac output, left ventricular unloading, cardiac pulsatility, and aortic valve flow as compared with the continuous flow model at the same level of support. The dynamic system model developed for this investigation can effectively simulate human cardiovascular support by a synchronous pulsatile or continuous flow ventricular assist device.

Verification of a computational cardiovascular system model comparing the hemodynamics of a continuous flow to a synchronous valveless pulsatile flow left ventricular assist device

PubMed Central

Gohean, Jeffrey R.; George, Mitchell J.; Pate, Thomas D.; Kurusz, Mark; Longoria, Raul G.; Smalling, Richard W.

2012-01-01

The purpose of this investigation is to utilize a computational model to compare a synchronized valveless pulsatile left ventricular assist device to continuous flow left ventricular assist devices at the same level of device flow, and to verify the model with in vivo porcine data. A dynamic system model of the human cardiovascular system was developed to simulate support of a healthy or failing native heart from a continuous flow left ventricular assist device or a synchronous, pulsatile, valveless, dual piston positive displacement pump. These results were compared to measurements made during in vivo porcine experiments. Results from the simulation model and from the in vivo counterpart show that the pulsatile pump provides higher cardiac output, left ventricular unloading, cardiac pulsatility, and aortic valve flow as compared to the continuous flow model at the same level of support. The dynamic system model developed for this investigation can effectively simulate human cardiovascular support by a synchronous pulsatile or continuous flow ventricular assist device. PMID:23438771

Anticoagulation therapy advisor: a decision-support system for heparin therapy during ECMO.

PubMed Central

Peverini, R. L.; Sale, M.; Rhine, W. D.; Fagan, L. M.; Lenert, L. A.

1992-01-01

We present a case study describing our development of a mathematical model to control a clinical parameter in a patient--in this case, the degree of anticoagulation during extracorporeal membrane oxygenation (ECMO) support. During ECMO therapy, an anticoagulant agent (heparin) is administered to prevent thrombosis. Under- or over-coagulation can have grave consequences. To improve control of anticoagulation, we developed a pharmacokinetic-pharmacodynamic (PK-PD) model that predicts activated clotting times (ACT) using the NONMEM program. We then integrated this model into a decision-support system, and validated it with an independent data set. The population model had a mean absolute error of prediction for ACT values of 33.5 seconds, with a mean bias in estimation of -14.3 seconds. Individualization of model-parameter estimates using nonlinear regression improved the absolute error prediction to 25.5 seconds, and lowered the mean bias to -3.1 seconds. The PK-PD model is coupled with software for heuristic interpretation of model results to provide a complete environment for the management of anticoagulation. PMID:1482937

Learning Engines - A Functional Object Model for Developing Learning Resources for the WWW.

ERIC Educational Resources Information Center

Fritze, Paul; Ip, Albert

The Learning Engines (LE) model, developed at the University of Melbourne (Australia), supports the integration of rich learning activities into the World Wide Web. The model is concerned with the practical design, educational value, and reusability of software components. The model is focused on the academic teacher who is in the best position to…

DEVELOPMENT, CALIBRATION AND APPLICATION OF A CONTAINMENT TRANSPORT AND FATE MASS BALANCE MODEL IN LAKE MICHIGAN, LM2

EPA Science Inventory

The Lake Michigan Mass Balance Project (LMMBP) was initiated to support the development of a Lake Wide Management Plan (LaMP) for Lake Michigan. As one of the models in the LMMBP modeling framework, the Level 2 Lake Michigan containment transport and fate (LM2) model has been dev...

Application of System Operational Effectiveness Methodology to Space Launch Vehicle Development and Operations

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Kelley, Gary W.

2012-01-01

The Department of Defense (DoD) defined System Operational Effectiveness (SOE) model provides an exceptional framework for an affordable approach to the development and operation of space launch vehicles and their supporting infrastructure. The SOE model provides a focal point from which to direct and measure technical effectiveness and process efficiencies of space launch vehicles. The application of the SOE model to a space launch vehicle's development and operation effort leads to very specific approaches and measures that require consideration during the design phase. This paper provides a mapping of the SOE model to the development of space launch vehicles for human exploration by addressing the SOE model key points of measurement including System Performance, System Availability, Technical Effectiveness, Process Efficiency, System Effectiveness, Life Cycle Cost, and Affordable Operational Effectiveness. In addition, the application of the SOE model to the launch vehicle development process is defined providing the unique aspects of space launch vehicle production and operations in lieu of the traditional broader SOE context that examines large quantities of fielded systems. The tailoring and application of the SOE model to space launch vehicles provides some key insights into the operational design drivers, capability phasing, and operational support systems.

Agricultural Model for the Nile Basin Decision Support System

NASA Astrophysics Data System (ADS)

van der Bolt, Frank; Seid, Abdulkarim

2014-05-01

To analyze options for increasing food supply in the Nile basin the Nile Agricultural Model (AM) was developed. The AM includes state-of-the-art descriptions of biophysical, hydrological and economic processes and realizes a coherent and consistent integration of hydrology, agronomy and economics. The AM covers both the agro-ecological domain (water, crop productivity) and the economic domain (food supply, demand, and trade) and allows to evaluate the macro-economic and hydrological impacts of scenarios for agricultural development. Starting with the hydrological information from the NileBasin-DSS the AM calculates the available water for agriculture, the crop production and irrigation requirements with the FAO-model AquaCrop. With the global commodity trade model MAGNET scenarios for land development and conversion are evaluated. The AM predicts consequences for trade, food security and development based on soil and water availability, crop allocation, food demand and food policy. The model will be used as a decision support tool to contribute to more productive and sustainable agriculture in individual Nile countries and the whole region.

The Alternative Peer Group: A Developmentally Appropriate Recovery Support Model for Adolescents.

PubMed

Nash, Angela; Collier, Crystal

2016-01-01

Recovery as the goal for substance use disorder treatment has been a key component of the Substance Abuse and Mental Health Services Administration's mission for the past decade. Consistent with their mission, there is a call for research and development of recovery-oriented systems of care to support affected individuals through all stages of the recovery process. Evidence is emerging to support recovery practice and research for adults, but recovery-oriented models for adolescents are scant. The Alternative Peer Group (APG) is a comprehensive adolescent recovery support model that integrates recovering peers and prosocial activities into evidence-based clinical practice. Employing APG participants' own words, this article will describe the essential elements and three theoretical frameworks underlying the APG model to illustrate how the APG serves as a developmentally appropriate recovery support service for adolescents with substance use disorder.

Using a student-faculty collaborative learning model to teach grant development in graduate nursing education.

PubMed

Falk, Nancy L; Phillips, Kathleen M; Hymer, Regina; Acquaviva, Kimberly D; Schumann, Mary Jean

2014-05-01

Graduate nurses are employed in clinical, research, educational, and policy roles. As leaders, they are expected to develop and sustain projects that support translating research to practice and policy. Funding to support initiatives is tight and requires innovative solutions to cover salaries, benefits, equipment purchases, and other program expenses. In an effort to teach grant writing while developing skilled leaders who are effective and competitive in securing funds, the George Washington University School of Nursing offers a graduate-level grant writing course. In the summer of 2011, a collaborative learning model was developed within the course. The joint approach was foundational to securing an Agency for Healthcare Research and Quality grant to support development and implementation of a patient engagement project by the Nursing Alliance for Quality Care. This article describes the project and offers hints for those seeking to develop a collaborative educational experience that affords new leadership skills for RNs from all backgrounds. Copyright 2014, SLACK Incorporated.

Modeling a Nursing Guideline with Standard Terminology and Unified Modeling Language for a Nursing Decision Support System: A Case Study.

PubMed

Choi, Jeeyae; Jansen, Kay; Coenen, Amy

In recent years, Decision Support Systems (DSSs) have been developed and used to achieve "meaningful use". One approach to developing DSSs is to translate clinical guidelines into a computer-interpretable format. However, there is no specific guideline modeling approach to translate nursing guidelines to computer-interpretable guidelines. This results in limited use of DSSs in nursing. Unified modeling language (UML) is a software writing language known to accurately represent the end-users' perspective, due to its expressive characteristics. Furthermore, standard terminology enabled DSSs have been shown to smoothly integrate into existing health information systems. In order to facilitate development of nursing DSSs, the UML was used to represent a guideline for medication management for older adults encode with the International Classification for Nursing Practice (ICNP®). The UML was found to be a useful and sufficient tool to model a nursing guideline for a DSS.

Modeling a Nursing Guideline with Standard Terminology and Unified Modeling Language for a Nursing Decision Support System: A Case Study

PubMed Central

Choi, Jeeyae; Jansen, Kay; Coenen, Amy

2015-01-01

In recent years, Decision Support Systems (DSSs) have been developed and used to achieve “meaningful use”. One approach to developing DSSs is to translate clinical guidelines into a computer-interpretable format. However, there is no specific guideline modeling approach to translate nursing guidelines to computer-interpretable guidelines. This results in limited use of DSSs in nursing. Unified modeling language (UML) is a software writing language known to accurately represent the end-users’ perspective, due to its expressive characteristics. Furthermore, standard terminology enabled DSSs have been shown to smoothly integrate into existing health information systems. In order to facilitate development of nursing DSSs, the UML was used to represent a guideline for medication management for older adults encode with the International Classification for Nursing Practice (ICNP®). The UML was found to be a useful and sufficient tool to model a nursing guideline for a DSS. PMID:26958174

DEVELOPMENT AND APPLICATIONS OF CFD SIMULATIONS SUPPORTING URBAN AIR QUALITY AND HOMELAND SECURITY

EPA Science Inventory

Prior to September 11, 2001 developments of Computational Fluid Dynamics (CFD) were begun to support air quality applications. CFD models are emerging as a promising technology for such assessments, in part due to the advancing power of computational hardware and software. CFD si...

DEVELOPMENT AND APPLICATIONS OF CFD SIMULATIONS IN SUPPORT OF AIR QUALITY STUDIES INVOLVING BUILDINGS

EPA Science Inventory

There is a need to properly develop the application of Computational Fluid Dynamics (CFD) methods in support of air quality studies involving pollution sources near buildings at industrial sites. CFD models are emerging as a promising technology for such assessments, in part due ...

Technology Staff-Development and Support Programs: Applying Abraham Maslow's Hierarchy of Needs.

ERIC Educational Resources Information Center

Bailey, Gerald D.; Pownell, David

1998-01-01

Presents Abraham Maslow's hierarchy of needs (physiological, safety, belonging, esteem, self-actualization) as a model for developing technology training and support for teachers, identifies basic technology-related needs that must be met before higher levels of technology integration can be achieved, and offers seven implications to help…

A Collaborative Professional Development Initiative Supporting Early Literacy Coaches

ERIC Educational Resources Information Center

Mraz, Maryann; Kissel, Brian; Algozzine, Bob; Babb, Julie; Foxworth, Kimberly

2011-01-01

Many believe that the key to translating research into successful practice lies in providing teachers with continuous professional development and ongoing coaching support. In this article, we provide an overview of the relevant coaching literature and describe 4 critical features of an evidence-based preschool literacy coaching model: the coach…

Modelling innovation performance of European regions using multi-output neural networks

PubMed Central

Henriques, Roberto

2017-01-01

Regional innovation performance is an important indicator for decision-making regarding the implementation of policies intended to support innovation. However, patterns in regional innovation structures are becoming increasingly diverse, complex and nonlinear. To address these issues, this study aims to develop a model based on a multi-output neural network. Both intra- and inter-regional determinants of innovation performance are empirically investigated using data from the 4th and 5th Community Innovation Surveys of NUTS 2 (Nomenclature of Territorial Units for Statistics) regions. The results suggest that specific innovation strategies must be developed based on the current state of input attributes in the region. Thus, it is possible to develop appropriate strategies and targeted interventions to improve regional innovation performance. We demonstrate that support of entrepreneurship is an effective instrument of innovation policy. We also provide empirical support that both business and government R&D activity have a sigmoidal effect, implying that the most effective R&D support should be directed to regions with below-average and average R&D activity. We further show that the multi-output neural network outperforms traditional statistical and machine learning regression models. In general, therefore, it seems that the proposed model can effectively reflect both the multiple-output nature of innovation performance and the interdependency of the output attributes. PMID:28968449

Modelling innovation performance of European regions using multi-output neural networks.

PubMed

Hajek, Petr; Henriques, Roberto

2017-01-01

Regional innovation performance is an important indicator for decision-making regarding the implementation of policies intended to support innovation. However, patterns in regional innovation structures are becoming increasingly diverse, complex and nonlinear. To address these issues, this study aims to develop a model based on a multi-output neural network. Both intra- and inter-regional determinants of innovation performance are empirically investigated using data from the 4th and 5th Community Innovation Surveys of NUTS 2 (Nomenclature of Territorial Units for Statistics) regions. The results suggest that specific innovation strategies must be developed based on the current state of input attributes in the region. Thus, it is possible to develop appropriate strategies and targeted interventions to improve regional innovation performance. We demonstrate that support of entrepreneurship is an effective instrument of innovation policy. We also provide empirical support that both business and government R&D activity have a sigmoidal effect, implying that the most effective R&D support should be directed to regions with below-average and average R&D activity. We further show that the multi-output neural network outperforms traditional statistical and machine learning regression models. In general, therefore, it seems that the proposed model can effectively reflect both the multiple-output nature of innovation performance and the interdependency of the output attributes.

Collaboration and Self-Regulation in Teachers' Professional Development

ERIC Educational Resources Information Center

Butler, Deborah L.; Lauscher, Helen Novak; Jarvis-Selinger, Sandra; Beckingham, Beverly

2004-01-01

This paper describes a professional development model with promise for supporting meaningful shifts in practice. We begin by introducing the theoretical principles underlying our professional development model, with a focus on explicating the interface between collaborative inquiry in a learning community (Lave, 1991, In L.B. Resnick, J.M. Levine,…

DEVELOPMENT AND APPLICATION OF POPULATION MODELS TO SUPPORT EPA'S ECOLOGICAL RISK ASSESSMENT PROCESSES FOR PESTICIDES

EPA Science Inventory

As part of a broader exploratory effort to develop ecological risk assessment approaches to estimate potential chemical effects on non-target populations, we describe an approach for developing simple population models to estimate the extent to which acute effects on individual...

Children's Orthographic Knowledge and Their Word Reading Skill: Testing Bidirectional Relations

ERIC Educational Resources Information Center

Conrad, Nicole J.; Deacon, S. Hélène

2016-01-01

Prominent models of word reading concur that the development of efficient word reading depends on the establishment of lexical orthographic representations in memory. In turn, word reading skills are conceptualised as supporting the development of these orthographic representations. As such, models of word reading development make clear…

Career Mapping for Professional Development and Succession Planning.

PubMed

Webb, Tammy; Diamond-Wells, Tammy; Jeffs, Debra

Career mapping facilitates professional development of nurses by education specialists and nurse managers. On the basis of national Nursing Professional Development Scope and Standards, our education and professional development framework supports the organization's professional practice model and provides a foundation for the professional career map. This article describes development, implementation, and evaluation of the professional career map for nurses at a large children's hospital to support achievement of the nursing strategic goals for succession planning and professional development.

Applications of ecological concepts and remote sensing technologies in archaeological site reconnaissance

NASA Technical Reports Server (NTRS)

Miller, W. Frank; Sever, Thomas L.; Lee, C. Daniel

1991-01-01

The concept of integrating ecological perspectives on early man's settlement patterns with advanced remote sensing technologies shows promise for predictive site modeling. Early work with aerial imagery and ecosystem analysis is discussed with respect to the development of a major project in Maya archaeology supported by NASA and the National Geographic Society with technical support from the Mississippi State Remote Sensing Center. A preliminary site reconnaissance model will be developed for testing during the 1991 field season.

Data collection handbook to support modeling the impacts of radioactive material in soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, C.; Cheng, J.J.; Jones, L.G.

1993-04-01

A pathway analysis computer code called RESRAD has been developed for implementing US Department of Energy Residual Radioactive Material Guidelines. Hydrogeological, meteorological, geochemical, geometrical (size, area, depth), and material-related (soil, concrete) parameters are used in the RESRAD code. This handbook discusses parameter definitions, typical ranges, variations, measurement methodologies, and input screen locations. Although this handbook was developed primarily to support the application of RESRAD, the discussions and values are valid for other model applications.

Air Force Reusable Booster System A Quick-look, Design Focused Modeling and Cost Analysis Study

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2011-01-01

Presents work supporting the Air force Reusable Booster System (RBS) - A Cost Study with Goals as follows: Support US launch systems decision makers, esp. in regards to the research, technology and demonstration investments required for reusable systems to succeed. Encourage operable directions in Reusable Booster / Launch Vehicle Systems technology choices, system design and product and process developments. Perform a quick-look cost study, while developing a cost model for more refined future analysis.

A 1-D Model of the 4 Bed Molecular Sieve of the Carbon Dioxide Removal Assembly

NASA Technical Reports Server (NTRS)

Coker, Robert; Knox, Jim

2015-01-01

Developments to improve system efficiency and reliability for water and carbon dioxide separation systems on crewed vehicles combine sub-scale systems testing and multi-physics simulations. This paper describes the development of COMSOL simulations in support of the Life Support Systems (LSS) project within NASA's Advanced Exploration Systems (AES) program. Specifically, we model the 4 Bed Molecular Sieve (4BMS) of the Carbon Dioxide Removal Assembly (CDRA) operating on the International Space Station (ISS).

Space station functional relationships analysis

NASA Technical Reports Server (NTRS)

Tullis, Thomas S.; Bied, Barbra R.

1988-01-01

A systems engineering process is developed to assist Space Station designers to understand the underlying operational system of the facility so that it can be physically arranged and configured to support crew productivity. The study analyzes the operational system proposed for the Space Station in terms of mission functions, crew activities, and functional relationships in order to develop a quantitative model for evaluation of interior layouts, configuration, and traffic analysis for any Station configuration. Development of the model involved identification of crew functions, required support equipment, criteria of assessing functional relationships, and tools for analyzing functional relationship matrices, as well as analyses of crew transition frequency, sequential dependencies, support equipment requirements, potential for noise interference, need for privacy, and overall compatability of functions. The model can be used for analyzing crew functions for the Initial Operating Capability of the Station and for detecting relationships among these functions. Note: This process (FRA) was used during Phase B design studies to test optional layouts of the Space Station habitat module. The process is now being automated as a computer model for use in layout testing of the Space Station laboratory modules during Phase C.

A Data-Driven Framework for Incorporating New Tools for ...

EPA Pesticide Factsheets

This talk was given during the “Exposure-Based Toxicity Testing” session at the annual meeting of the International Society for Exposure Science. It provided an update on the state of the science and tools that may be employed in risk-based prioritization efforts. It outlined knowledge gained from the data provided using these high-throughput tools to assess chemical bioactivity and to predict chemical exposures and also identified future needs. It provided an opportunity to showcase ongoing research efforts within the National Exposure Research Laboratory and the National Center for Computational Toxicology within the Office of Research and Development to an international audience. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

Planner-Based Control of Advanced Life Support Systems

NASA Technical Reports Server (NTRS)

Muscettola, Nicola; Kortenkamp, David; Fry, Chuck; Bell, Scott

2005-01-01

The paper describes an approach to the integration of qualitative and quantitative modeling techniques for advanced life support (ALS) systems. Developing reliable control strategies that scale up to fully integrated life support systems requires augmenting quantitative models and control algorithms with the abstractions provided by qualitative, symbolic models and their associated high-level control strategies. This will allow for effective management of the combinatorics due to the integration of a large number of ALS subsystems. By focusing control actions at different levels of detail and reactivity we can use faster: simpler responses at the lowest level and predictive but complex responses at the higher levels of abstraction. In particular, methods from model-based planning and scheduling can provide effective resource management over long time periods. We describe reference implementation of an advanced control system using the IDEA control architecture developed at NASA Ames Research Center. IDEA uses planning/scheduling as the sole reasoning method for predictive and reactive closed loop control. We describe preliminary experiments in planner-based control of ALS carried out on an integrated ALS simulation developed at NASA Johnson Space Center.

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

A model of therapist competencies for the empirically supported interpersonal psychotherapy for adolescent depression.

PubMed

Sburlati, Elizabeth S; Lyneham, Heidi J; Mufson, Laura H; Schniering, Carolyn A

2012-06-01

In order to treat adolescent depression, a number of empirically supported treatments (ESTs) have been developed from both the cognitive behavioral therapy (CBT) and interpersonal psychotherapy (IPT-A) frameworks. Research has shown that in order for these treatments to be implemented in routine clinical practice (RCP), effective therapist training must be generated and provided. However, before such training can be developed, a good understanding of the therapist competencies needed to implement these ESTs is required. Sburlati et al. (Clin Child Fam Psychol Rev 14:89-109, 2011) developed a model of therapist competencies for implementing CBT using the well-established Delphi technique. Given that IPT-A differs considerably to CBT, the current study aims to develop a model of therapist competencies for the implementation of IPT-A using a similar procedure as that applied in Sburlati et al. (Clin Child Fam Psychol Rev 14:89-109, 2011). This method involved: (1) identifying and reviewing an empirically supported IPT-A approach, (2) extracting therapist competencies required for the implementation of IPT-A, (3) consulting with a panel of IPT-A experts to generate an overall model of therapist competencies, and (4) validating the overall model with the IPT-A manual author. The resultant model offers an empirically derived set of competencies necessary for effectively treating adolescent depression using IPT-A and has wide implications for the development of therapist training, competence assessment measures, and evidence-based practice guidelines. This model, therefore, provides an empirical framework for the development of dissemination and implementation programs aimed at ensuring that adolescents with depression receive effective care in RCP settings. Key similarities and differences between CBT and IPT-A, and the therapist competencies required for implementing these treatments, are also highlighted throughout this article.

An Integrated Web-Based 3d Modeling and Visualization Platform to Support Sustainable Cities

NASA Astrophysics Data System (ADS)

Amirebrahimi, S.; Rajabifard, A.

2012-07-01

Sustainable Development is found as the key solution to preserve the sustainability of cities in oppose to ongoing population growth and its negative impacts. This is complex and requires a holistic and multidisciplinary decision making. Variety of stakeholders with different backgrounds also needs to be considered and involved. Numerous web-based modeling and visualization tools have been designed and developed to support this process. There have been some success stories; however, majority failed to bring a comprehensive platform to support different aspects of sustainable development. In this work, in the context of SDI and Land Administration, CSDILA Platform - a 3D visualization and modeling platform -was proposed which can be used to model and visualize different dimensions to facilitate the achievement of sustainability, in particular, in urban context. The methodology involved the design of a generic framework for development of an analytical and visualization tool over the web. CSDILA Platform was then implemented via number of technologies based on the guidelines provided by the framework. The platform has a modular structure and uses Service-Oriented Architecture (SOA). It is capable of managing spatial objects in a 4D data store and can flexibly incorporate a variety of developed models using the platform's API. Development scenarios can be modeled and tested using the analysis and modeling component in the platform and the results are visualized in seamless 3D environment. The platform was further tested using number of scenarios and showed promising results and potentials to serve a wider need. In this paper, the design process of the generic framework, the implementation of CSDILA Platform and technologies used, and also findings and future research directions will be presented and discussed.

Software for Brain Network Simulations: A Comparative Study

PubMed Central

Tikidji-Hamburyan, Ruben A.; Narayana, Vikram; Bozkus, Zeki; El-Ghazawi, Tarek A.

2017-01-01

Numerical simulations of brain networks are a critical part of our efforts in understanding brain functions under pathological and normal conditions. For several decades, the community has developed many software packages and simulators to accelerate research in computational neuroscience. In this article, we select the three most popular simulators, as determined by the number of models in the ModelDB database, such as NEURON, GENESIS, and BRIAN, and perform an independent evaluation of these simulators. In addition, we study NEST, one of the lead simulators of the Human Brain Project. First, we study them based on one of the most important characteristics, the range of supported models. Our investigation reveals that brain network simulators may be biased toward supporting a specific set of models. However, all simulators tend to expand the supported range of models by providing a universal environment for the computational study of individual neurons and brain networks. Next, our investigations on the characteristics of computational architecture and efficiency indicate that all simulators compile the most computationally intensive procedures into binary code, with the aim of maximizing their computational performance. However, not all simulators provide the simplest method for module development and/or guarantee efficient binary code. Third, a study of their amenability for high-performance computing reveals that NEST can almost transparently map an existing model on a cluster or multicore computer, while NEURON requires code modification if the model developed for a single computer has to be mapped on a computational cluster. Interestingly, parallelization is the weakest characteristic of BRIAN, which provides no support for cluster computations and limited support for multicore computers. Fourth, we identify the level of user support and frequency of usage for all simulators. Finally, we carry out an evaluation using two case studies: a large network with simplified neural and synaptic models and a small network with detailed models. These two case studies allow us to avoid any bias toward a particular software package. The results indicate that BRIAN provides the most concise language for both cases considered. Furthermore, as expected, NEST mostly favors large network models, while NEURON is better suited for detailed models. Overall, the case studies reinforce our general observation that simulators have a bias in the computational performance toward specific types of the brain network models. PMID:28775687

From guideline modeling to guideline execution: defining guideline-based decision-support services.

PubMed Central

Tu, S. W.; Musen, M. A.

2000-01-01

We describe our task-based approach to defining the guideline-based decision-support services that the EON system provides. We categorize uses of guidelines in patient-specific decision support into a set of generic tasks--making of decisions, specification of work to be performed, interpretation of data, setting of goals, and issuance of alert and reminders--that can be solved using various techniques. Our model includes constructs required for representing the knowledge used by these techniques. These constructs form a toolkit from which developers can select modeling solutions for guideline task. Based on the tasks and the guideline model, we define a guideline-execution architecture and a model of interactions between a decision-support server and clients that invoke services provided by the server. These services use generic interfaces derived from guideline tasks and their associated modeling constructs. We describe two implementations of these decision-support services and discuss how this work can be generalized. We argue that a well-defined specification of guideline-based decision-support services will facilitate sharing of tools that implement computable clinical guidelines. PMID:11080007

6-D, A Process Framework for the Design and Development of Web-based Systems.

ERIC Educational Resources Information Center

Christian, Phillip

2001-01-01

Explores how the 6-D framework can form the core of a comprehensive systemic strategy and help provide a supporting structure for more robust design and development while allowing organizations to support whatever methods and models best suit their purpose. 6-D stands for the phases of Web design and development: Discovery, Definition, Design,…

Modeling paradigms for medical diagnostic decision support: a survey and future directions.

PubMed

Wagholikar, Kavishwar B; Sundararajan, Vijayraghavan; Deshpande, Ashok W

2012-10-01

Use of computer based decision tools to aid clinical decision making, has been a primary goal of research in biomedical informatics. Research in the last five decades has led to the development of Medical Decision Support (MDS) applications using a variety of modeling techniques, for a diverse range of medical decision problems. This paper surveys literature on modeling techniques for diagnostic decision support, with a focus on decision accuracy. Trends and shortcomings of research in this area are discussed and future directions are provided. The authors suggest that-(i) Improvement in the accuracy of MDS application may be possible by modeling of vague and temporal data, research on inference algorithms, integration of patient information from diverse sources and improvement in gene profiling algorithms; (ii) MDS research would be facilitated by public release of de-identified medical datasets, and development of opensource data-mining tool kits; (iii) Comparative evaluations of different modeling techniques are required to understand characteristics of the techniques, which can guide developers in choice of technique for a particular medical decision problem; and (iv) Evaluations of MDS applications in clinical setting are necessary to foster physicians' utilization of these decision aids.

Computer-Aided Sensor Development Focused on Security Issues.

PubMed

Bialas, Andrzej

2016-05-26

The paper examines intelligent sensor and sensor system development according to the Common Criteria methodology, which is the basic security assurance methodology for IT products and systems. The paper presents how the development process can be supported by software tools, design patterns and knowledge engineering. The automation of this process brings cost-, quality-, and time-related advantages, because the most difficult and most laborious activities are software-supported and the design reusability is growing. The paper includes a short introduction to the Common Criteria methodology and its sensor-related applications. In the experimental section the computer-supported and patterns-based IT security development process is presented using the example of an intelligent methane detection sensor. This process is supported by an ontology-based tool for security modeling and analyses. The verified and justified models are transferred straight to the security target specification representing security requirements for the IT product. The novelty of the paper is to provide a patterns-based and computer-aided methodology for the sensors development with a view to achieving their IT security assurance. The paper summarizes the validation experiment focused on this methodology adapted for the sensors system development, and presents directions of future research.

Computer-Aided Sensor Development Focused on Security Issues

PubMed Central

Bialas, Andrzej

2016-01-01

The paper examines intelligent sensor and sensor system development according to the Common Criteria methodology, which is the basic security assurance methodology for IT products and systems. The paper presents how the development process can be supported by software tools, design patterns and knowledge engineering. The automation of this process brings cost-, quality-, and time-related advantages, because the most difficult and most laborious activities are software-supported and the design reusability is growing. The paper includes a short introduction to the Common Criteria methodology and its sensor-related applications. In the experimental section the computer-supported and patterns-based IT security development process is presented using the example of an intelligent methane detection sensor. This process is supported by an ontology-based tool for security modeling and analyses. The verified and justified models are transferred straight to the security target specification representing security requirements for the IT product. The novelty of the paper is to provide a patterns-based and computer-aided methodology for the sensors development with a view to achieving their IT security assurance. The paper summarizes the validation experiment focused on this methodology adapted for the sensors system development, and presents directions of future research. PMID:27240360

National Transonic Facility model and model support vibration problems

NASA Technical Reports Server (NTRS)

Young, Clarence P., Jr.; Popernack, Thomas G., Jr.; Gloss, Blair B.

1990-01-01

Vibrations of models and model support system were encountered during testing in the National Transonic Facility. Model support system yaw plane vibrations have resulted in model strain gage balance design load limits being reached. These high levels of vibrations resulted in limited aerodynamic testing for several wind tunnel models. The yaw vibration problem was the subject of an intensive experimental and analytical investigation which identified the primary source of the yaw excitation and resulted in attenuation of the yaw oscillations to acceptable levels. This paper presents the principal results of analyses and experimental investigation of the yaw plane vibration problems. Also, an overview of plans for development and installation of a permanent model system dynamic and aeroelastic response measurement and monitoring system for the National Transonic Facility is presented.

A Data Analytical Framework for Improving Real-Time, Decision Support Systems in Healthcare

ERIC Educational Resources Information Center

Yahav, Inbal

2010-01-01

In this dissertation we develop a framework that combines data mining, statistics and operations research methods for improving real-time decision support systems in healthcare. Our approach consists of three main concepts: data gathering and preprocessing, modeling, and deployment. We introduce the notion of offline and semi-offline modeling to…

Development, content validity, and piloting of an instrument designed to measure managers' attitude toward workplace breastfeeding support.

PubMed

Chow, Tan; Wolfe, Edward W; Olson, Beth H

2012-07-01

Manager attitude is influential in female employees' perceptions of workplace breastfeeding support. Currently, no instrument is available to assess manager attitude toward supporting women who wish to combine breastfeeding with work. We developed and piloted an instrument to measure manager attitudes toward workplace breastfeeding support entitled the "Managers' Attitude Toward Breastfeeding Support Questionnaire," an instrument that measures four constructs using 60 items that are rated agree/disagree on a 4-point Likert rating scale. We established the content validity of the Managers' Attitude Toward Breastfeeding Support Questionnaire measures through expert content review (n=22), expert assessment of item fit (n=11), and cognitive interviews (n=8). Data were collected from a purposive sample of 185 front-line managers who had experience supervising female employees, and responses were scaled using the Multidimensional Random Coefficients Multinomial Logit Model. Dimensionality analyses supported the proposed four-construct model. Reliability ranged from 0.75 to 0.86, and correlations between the constructs were moderately strong (0.47 to 0.71). Four items in two constructs exhibited model-to-data misfit and/or a low score-measure correlation. One item was revised and the other three items were retained in the Managers' Attitude Toward Breastfeeding Support Questionnaire. Findings of this study suggest that the Managers' Attitude Toward Breastfeeding Support Questionnaire measures are reliable and valid indicators of manager attitude toward workplace breastfeeding support, and future research should be conducted to establish external validity. The Managers' Attitude Toward Breastfeeding Support Questionnaire could be used to collect data in a standardized manner within and across companies to measure and compare manager attitudes toward supporting breastfeeding. Organizations can subsequently develop targeted strategies to improve support for breastfeeding employees through efforts influencing managerial attitude. Copyright © 2012 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Efficient Non-Hydrostatic Modeling of Rotational, Turbulent, Dispersive, and Variable-Density Flows in the Vicinity of River Mouths and Inlets: Development and Field Support

DTIC Science & Technology

2013-09-30

numerical efforts undertaken here implement established aspects of Boussinesq -type modeling, developed by the PI and other researchers. These aspects...the Boussinesq -type framework, and then implement in a numerical model. Once this comprehensive model is developed and tested against established...phenomena that might be observed at New River. WORK COMPLETED In FY13 we have continued the development of a Boussinesq -type formulation that

Identity Profiles in Lesbian, Gay, and Bisexual Youth: The Role of Family Influences

PubMed Central

Bregman, Hallie R.; Malik, Neena M.; Page, Matthew J. L.; Makynen, Emily; Lindahl, Kristin M.

2012-01-01

Sexual identity development is a central task of adolescence and young adulthood and can be especially challenging for sexual minority youth. Recent research has moved from a stage model of identity development in lesbian, gay, and bisexual (LGB) youth to examining identity in a non-linear, multidimensional manner. In addition, although families have been identified as important to youth's identity development, limited research has examined the influence of parental responses to youth's disclosure of their LGB sexual orientation on LGB identity. The current study examined a multidimensional model of LGB identity and its links with parental support and rejection. One hundred and sixty-nine LGB adolescents and young adults (ages 14–24, 56% male, 48% gay, 31% lesbian, 21% bisexual) described themselves on dimensions of LGB identity and reported on parental rejection, sexuality-specific social support, and non-sexuality-specific social support. Using latent profile analysis (LPA), two profiles were identified, indicating that youth experience both affirmed and struggling identities. Results indicated that parental rejection and sexuality-specific social support from families were salient links to LGB identity profile classification, while non-sexuality specific social support was unrelated. Parental rejection and sexuality-specific social support may be important to target in interventions for families to foster affirmed LGB identity development in youth. PMID:22847752

Integrating O/S models during conceptual design, part 1

NASA Technical Reports Server (NTRS)

Ebeling, Charles E.

1994-01-01

The University of Dayton is pleased to submit this report to the National Aeronautics and Space Administration (NASA), Langley Research Center, which integrates a set of models for determining operational capabilities and support requirements during the conceptual design of proposed space systems. This research provides for the integration of the reliability and maintainability (R&M) model, both new and existing simulation models, and existing operations and support (O&S) costing equations in arriving at a complete analysis methodology. Details concerning the R&M model and the O&S costing model may be found in previous reports accomplished under this grant (NASA Research Grant NAG1-1327). In the process of developing this comprehensive analysis approach, significant enhancements were made to the R&M model, updates to the O&S costing model were accomplished, and a new simulation model developed. This is the 1st part of a 3 part technical report.

Program of research in severe storms

NASA Technical Reports Server (NTRS)

1979-01-01

Two modeling areas, the development of a mesoscale chemistry-meteorology interaction model, and the development of a combined urban chemical kinetics-transport model are examined. The problems associated with developing a three dimensional combined meteorological-chemical kinetics computer program package are defined. A similar three dimensional hydrostatic real time model which solves the fundamental Navier-Stokes equations for nonviscous flow is described. An urban air quality simulation model, developed to predict the temporal and spatial distribution of reactive and nonreactive gases in and around an urban area and to support a remote sensor evaluation program is reported.

An approach to knowledge engineering to support knowledge-based simulation of payload ground processing at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Mcmanus, Shawn; Mcdaniel, Michael

1989-01-01

Planning for processing payloads was always difficult and time-consuming. With the advent of Space Station Freedom and its capability to support a myriad of complex payloads, the planning to support this ground processing maze involves thousands of man-hours of often tedious data manipulation. To provide the capability to analyze various processing schedules, an object oriented knowledge-based simulation environment called the Advanced Generic Accomodations Planning Environment (AGAPE) is being developed. Having nearly completed the baseline system, the emphasis in this paper is directed toward rule definition and its relation to model development and simulation. The focus is specifically on the methodologies implemented during knowledge acquisition, analysis, and representation within the AGAPE rule structure. A model is provided to illustrate the concepts presented. The approach demonstrates a framework for AGAPE rule development to assist expert system development.

Organizational Strategies for End-User Computing Support.

ERIC Educational Resources Information Center

Blackmun, Robert R.; And Others

1988-01-01

Effective support for end users of computers has been an important issue in higher education from the first applications of general purpose mainframe computers through minicomputers, microcomputers, and supercomputers. The development of end user support is reviewed and organizational models are examined. (Author/MLW)

Social Support and Well-Being at Mid-Life among Mothers of Adolescents and Adults with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Smith, Leann E.; Greenberg, Jan S.; Seltzer, Marsha Mailick

2012-01-01

The present study investigated the impact of social support on the psychological well-being of mothers of adolescents and adults with ASD (n = 269). Quantity of support (number of social network members) as well as valence of support (positive support and negative support) were assessed using a modified version of the "convoy model" developed by…

How Adverse Outcome Pathways Can Aid the Development and Use of Computational Prediction Models for Regulatory Toxicology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wittwehr, Clemens; Aladjov, Hristo; Ankley, Gerald

Efforts are underway to transform regulatory toxicology and chemical safety assessment from a largely empirical science based on direct observation of apical toxicity outcomes in whole organism toxicity tests to a predictive one in which outcomes and risk are inferred from accumulated mechanistic understanding. The adverse outcome pathway (AOP) framework has emerged as a systematic approach for organizing knowledge that supports such inference. We argue that this systematic organization of knowledge can inform and help direct the design and development of computational prediction models that can further enhance the utility of mechanistic and in silico data for chemical safety assessment.more » Examples of AOP-informed model development and its application to the assessment of chemicals for skin sensitization and multiple modes of endocrine disruption are provided. The role of problem formulation, not only as a critical phase of risk assessment, but also as guide for both AOP and complementary model development described. Finally, a proposal for actively engaging the modeling community in AOP-informed computational model development is made. The contents serve as a vision for how AOPs can be leveraged to facilitate development of computational prediction models needed to support the next generation of chemical safety assessment.« less

Developing Contextual Mathematical Thinking Learning Model to Enhance Higher-Order Thinking Ability for Middle School Students

ERIC Educational Resources Information Center

Samo, Damianus D.; Darhim; Kartasasmita, Bana

2017-01-01

The purpose of this research is to develop contextual mathematical thinking learning model which is valid, practical and effective based on the theoretical reviews and its support to enhance higher-order thinking ability. This study is a research and development (R & D) with three main phases: investigation, development, and implementation.…

E-DECIDER: Using Earth Science Data and Modeling Tools to Develop Decision Support for Earthquake Disaster Response

NASA Astrophysics Data System (ADS)

Glasscoe, Margaret T.; Wang, Jun; Pierce, Marlon E.; Yoder, Mark R.; Parker, Jay W.; Burl, Michael C.; Stough, Timothy M.; Granat, Robert A.; Donnellan, Andrea; Rundle, John B.; Ma, Yu; Bawden, Gerald W.; Yuen, Karen

2015-08-01

Earthquake Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response (E-DECIDER) is a NASA-funded project developing new capabilities for decision making utilizing remote sensing data and modeling software to provide decision support for earthquake disaster management and response. E-DECIDER incorporates the earthquake forecasting methodology and geophysical modeling tools developed through NASA's QuakeSim project. Remote sensing and geodetic data, in conjunction with modeling and forecasting tools allows us to provide both long-term planning information for disaster management decision makers as well as short-term information following earthquake events (i.e. identifying areas where the greatest deformation and damage has occurred and emergency services may need to be focused). This in turn is delivered through standards-compliant web services for desktop and hand-held devices.

Building Your Program. Supported Education: A Promising Practice. Evidence-Based Practices KIT (Knowledge Informing Transformation)

ERIC Educational Resources Information Center

Unger, Karen V.

2011-01-01

"Building Your Program" is intended to help mental health authorities, agency administrators, and program leaders think through and develop Supported Education. The first part of this booklet gives you background information about the Supported Education model. Specific information about your role in implementing and sustaining Supported Education…

Databases for multilevel biophysiology research available at Physiome.jp.

PubMed

Asai, Yoshiyuki; Abe, Takeshi; Li, Li; Oka, Hideki; Nomura, Taishin; Kitano, Hiroaki

2015-01-01

Physiome.jp (http://physiome.jp) is a portal site inaugurated in 2007 to support model-based research in physiome and systems biology. At Physiome.jp, several tools and databases are available to support construction of physiological, multi-hierarchical, large-scale models. There are three databases in Physiome.jp, housing mathematical models, morphological data, and time-series data. In late 2013, the site was fully renovated, and in May 2015, new functions were implemented to provide information infrastructure to support collaborative activities for developing models and performing simulations within the database framework. This article describes updates to the databases implemented since 2013, including cooperation among the three databases, interactive model browsing, user management, version management of models, management of parameter sets, and interoperability with applications.

MEMOSys: Bioinformatics platform for genome-scale metabolic models

PubMed Central

2011-01-01

Background Recent advances in genomic sequencing have enabled the use of genome sequencing in standard biological and biotechnological research projects. The challenge is how to integrate the large amount of data in order to gain novel biological insights. One way to leverage sequence data is to use genome-scale metabolic models. We have therefore designed and implemented a bioinformatics platform which supports the development of such metabolic models. Results MEMOSys (MEtabolic MOdel research and development System) is a versatile platform for the management, storage, and development of genome-scale metabolic models. It supports the development of new models by providing a built-in version control system which offers access to the complete developmental history. Moreover, the integrated web board, the authorization system, and the definition of user roles allow collaborations across departments and institutions. Research on existing models is facilitated by a search system, references to external databases, and a feature-rich comparison mechanism. MEMOSys provides customizable data exchange mechanisms using the SBML format to enable analysis in external tools. The web application is based on the Java EE framework and offers an intuitive user interface. It currently contains six annotated microbial metabolic models. Conclusions We have developed a web-based system designed to provide researchers a novel application facilitating the management and development of metabolic models. The system is freely available at http://www.icbi.at/MEMOSys. PMID:21276275

A dyadic model of living with epilepsy based on the perspectives of adults with epilepsy and their support persons

PubMed Central

Walker, Elizabeth Reisinger; Barmon, Christina; McGee, Robin E.; Engelhard, George; Sterk, Claire E.; DiIorio, Colleen; Thompson, Nancy J.

2015-01-01

Epilepsy is a chronic condition that significantly affects the lives of individuals with epilepsy and their support persons, though few studies have examined the experiences of both individuals. To examine these experiences and explore the interpersonal relationships between dyad members, we conducted in-depth interviews with 22 people with epilepsy and 16 support persons. Data analysis was guided by a grounded theory perspective. We developed a model that shows how epilepsy impacts the lives of both people with epilepsy and support persons and how the experiences of people with epilepsy and supporters influence one another. The core model elements were seizure and treatment factors, relationship characteristics, self-management, seizure control, support provided, illness intrusiveness, and quality of life. People with epilepsy moved through the model in five trajectories depending on seizure control, relationship type, and gender. Support providers followed four trajectories based on seizure control, perception of burden, and support for themselves. People with epilepsy and their primary support providers have varied experiences in how epilepsy affects their lives. This model could serve as a basis for future research and intervention efforts focused on ways to reduce illness intrusiveness and improve quality of life for people with epilepsy and their supporters. PMID:26515151

A Review of the Experimental and Modeling Development of a Water Phase Change Heat Exchanger for Future Exploration Support Vehicles

NASA Technical Reports Server (NTRS)

Cognata, Thomas; Leimkuehler, Thomas; Ramaswamy, Balasubramaniam; Nayagam, Vedha; Hasan, Mohammad; Stephan, Ryan

2011-01-01

Water affords manifold benefits for human space exploration. Its properties make it useful for the storage of thermal energy as a Phase Change Material (PCM) in thermal control systems, in radiation shielding against Solar Particle Events (SPE) for the protection of crew members, and it is indisputably necessary for human life support. This paper envisions a single application for water which addresses these benefits for future exploration support vehicles and it describes recent experimental and modeling work that has been performed in order to arrive at a description of the thermal behavior of such a system. Experimental units have been developed and tested which permit the evaluation of the many parameters of design for such a system with emphasis on the latent energy content, temperature rise, mass, and interstitial material geometry. The experimental results are used to develop a robust and well correlated model which is intended to guide future design efforts toward the multi-purposed water PCM heat exchanger envisioned.

Supporting Universal Prevention Programs: A Two-Phased Coaching Model

PubMed Central

Becker, Kimberly D.; Darney, Dana; Domitrovich, Celene; Keperling, Jennifer Pitchford; Ialongo, Nicholas S.

2013-01-01

Schools are adopting evidence-based programs designed to enhance students’ emotional and behavioral competencies at increasing rates (Hemmeter, Snyder, & Artman, 2011). At the same time, teachers express the need for increased support surrounding implementation of these evidence-based programs (Carter & Van Norman, 2010). Ongoing professional development in the form of coaching may enhance teacher skills and implementation (Noell et al., 2005; Stormont, Reinke, Newcomer, Darney, & Lewis, 2012). There exists a need for a coaching model that can be applied to a variety of teacher skill levels and one that guides coach decision-making about how best to support teachers. This article provides a detailed account of a two-phased coaching model with empirical support developed and tested with coaches and teachers in urban schools (Becker, Bradshaw, Domitrovich, & Ialongo, 2013). In the initial universal coaching phase, all teachers receive the same coaching elements regardless of their skill level. Then, in the tailored coaching phase, coaching varies according to the strengths and needs of each teacher. Specifically, more intensive coaching strategies are used only with teachers who need additional coaching supports whereas other teachers receive just enough support to consolidate and maintain their strong implementation. Examples of how coaches used the two-phased coaching model when working with teachers who were implementing two universal prevention programs (i.e., the PATHS® curriculum and PAX Good Behavior Game [PAX GBG]) provide illustrations of the application of this model. The potential reach of this coaching model extends to other school-based programs as well as other settings in which coaches partner with interventionists to implement evidence-based programs. PMID:23660973

The Modular Modeling System (MMS): A modeling framework for water- and environmental-resources management

USGS Publications Warehouse

Leavesley, G.H.; Markstrom, S.L.; Viger, R.J.

2004-01-01

The interdisciplinary nature and increasing complexity of water- and environmental-resource problems require the use of modeling approaches that can incorporate knowledge from a broad range of scientific disciplines. The large number of distributed hydrological and ecosystem models currently available are composed of a variety of different conceptualizations of the associated processes they simulate. Assessment of the capabilities of these distributed models requires evaluation of the conceptualizations of the individual processes, and the identification of which conceptualizations are most appropriate for various combinations of criteria, such as problem objectives, data constraints, and spatial and temporal scales of application. With this knowledge, "optimal" models for specific sets of criteria can be created and applied. The U.S. Geological Survey (USGS) Modular Modeling System (MMS) is an integrated system of computer software that has been developed to provide these model development and application capabilities. MMS supports the integration of models and tools at a variety of levels of modular design. These include individual process models, tightly coupled models, loosely coupled models, and fully-integrated decision support systems. A variety of visualization and statistical tools are also provided. MMS has been coupled with the Bureau of Reclamation (BOR) object-oriented reservoir and river-system modeling framework, RiverWare, under a joint USGS-BOR program called the Watershed and River System Management Program. MMS and RiverWare are linked using a shared relational database. The resulting database-centered decision support system provides tools for evaluating and applying optimal resource-allocation and management strategies to complex, operational decisions on multipurpose reservoir systems and watersheds. Management issues being addressed include efficiency of water-resources management, environmental concerns such as meeting flow needs for endangered species, and optimizing operations within the constraints of multiple objectives such as power generation, irrigation, and water conservation. This decision support system approach is being developed, tested, and implemented in the Gunni-son, Yakima, San Juan, Rio Grande, and Truckee River basins of the western United States. Copyright ASCE 2004.

ESPC Common Model Architecture Earth System Modeling Framework (ESMF) Software and Application Development

DTIC Science & Technology

2015-09-30

originate from NASA , NOAA , and community modeling efforts, and support for creation of the suite was shared by sponsors from other agencies. ESPS...Framework (ESMF) Software and Application Development Cecelia Deluca NESII/CIRES/ NOAA Earth System Research Laboratory 325 Broadway Boulder, CO...Capability (NUOPC) was established between NOAA and Navy to develop a common software architecture for easy and efficient interoperability. The

Jobs and Economic Development Impact (JEDI) Model: Offshore Wind User Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lantz, E.; Goldberg, M.; Keyser, D.

2013-06-01

The Offshore Wind Jobs and Economic Development Impact (JEDI) model, developed by NREL and MRG & Associates, is a spreadsheet based input-output tool. JEDI is meant to be a user friendly and transparent tool to estimate potential economic impacts supported by the development and operation of offshore wind projects. This guide describes how to use the model as well as technical information such as methodology, limitations, and data sources.

A task-based support architecture for developing point-of-care clinical decision support systems for the emergency department.

PubMed

Wilk, S; Michalowski, W; O'Sullivan, D; Farion, K; Sayyad-Shirabad, J; Kuziemsky, C; Kukawka, B

2013-01-01

The purpose of this study was to create a task-based support architecture for developing clinical decision support systems (CDSSs) that assist physicians in making decisions at the point-of-care in the emergency department (ED). The backbone of the proposed architecture was established by a task-based emergency workflow model for a patient-physician encounter. The architecture was designed according to an agent-oriented paradigm. Specifically, we used the O-MaSE (Organization-based Multi-agent System Engineering) method that allows for iterative translation of functional requirements into architectural components (e.g., agents). The agent-oriented paradigm was extended with ontology-driven design to implement ontological models representing knowledge required by specific agents to operate. The task-based architecture allows for the creation of a CDSS that is aligned with the task-based emergency workflow model. It facilitates decoupling of executable components (agents) from embedded domain knowledge (ontological models), thus supporting their interoperability, sharing, and reuse. The generic architecture was implemented as a pilot system, MET3-AE--a CDSS to help with the management of pediatric asthma exacerbation in the ED. The system was evaluated in a hospital ED. The architecture allows for the creation of a CDSS that integrates support for all tasks from the task-based emergency workflow model, and interacts with hospital information systems. Proposed architecture also allows for reusing and sharing system components and knowledge across disease-specific CDSSs.

Supporting 3rd-grade students model-based explanations about groundwater: a quasi-experimental study of a curricular intervention

NASA Astrophysics Data System (ADS)

Zangori, Laura; Vo, Tina; Forbes, Cory T.; Schwarz, Christina V.

2017-07-01

Scientific modelling is a key practice in which K-12 students should engage to begin developing robust conceptual understanding of natural systems, including water. However, little past research has explored primary students' learning about groundwater, engagement in scientific modelling, and/or the ways in which teachers conceptualise and cultivate model-based science learning environments. We are engaged in a multi-year project designed to support 3rd-grade students' formulation of model-based explanations (MBE) for hydrologic phenomenon, including groundwater, through curricular and instructional support. In this quasi-experimental comparative study of five 3rd-grade classrooms, we present findings from analysis of students' MBE generated as part of experiencing a baseline curricular intervention (Year 1) and a modelling-enhanced curricular intervention (Year 2). Findings show that students experiencing the latter version of the unit made significant gains in both conceptual understanding and reasoning about groundwater, but that these gains varied by classroom. Overall, student gains from Year 1 to Year 2 were attributed to changes in two of the five classrooms in which students were provided additional instructional supports and scaffolds to enhance their MBE for groundwater. Within these two classrooms, the teachers enacted the Year 2 curriculum in unique ways that reflected their deeper understanding about the practices of modelling. Their enactments played a critical role in supporting students' MBE about groundwater. Study findings contribute to research on scientific modelling in elementary science learning environments and have important implications for teachers and curriculum developers.

University Library Strategy Development: A Conceptual Model of Researcher Performance to Inform Service Delivery

ERIC Educational Resources Information Center

Maddox, Alexia; Zhao, Linlin

2017-01-01

This case study presents a conceptual model of researcher performance developed by Deakin University Library, Australia. The model aims to organize research performance data into meaningful researcher profiles, referred to as researcher typologies, which support the demonstration of research impact and value. Three dimensions shaping researcher…

Publically accessible decision support system of the spatially referenced regressions on watershed attributes (SPARROW) model and model enhancements in South Carolina

Treesearch

Celeste Journey; Anne B. Hoos; David E. Ladd; John W. brakebill; Richard A. Smith

2016-01-01

The U.S. Geological Survey (USGS) National Water Quality Assessment program has developed a web-based decision support system (DSS) to provide free public access to the steady-stateSPAtially Referenced Regressions On Watershed attributes (SPARROW) model simulation results on nutrient conditions in streams and rivers and to offer scenario testing capabilities for...

Decision support for evidence-based integration of disease control: A proof of concept for malaria and schistosomiasis

PubMed Central

Graeden, Ellie; Kerr, Justin; Sorrell, Erin M.; Katz, Rebecca

2018-01-01

Managing infectious disease requires rapid and effective response to support decision making. The decisions are complex and require understanding of the diseases, disease intervention and control measures, and the disease-relevant characteristics of the local community. Though disease modeling frameworks have been developed to address these questions, the complexity of current models presents a significant barrier to community-level decision makers in using the outputs of the most scientifically robust methods to support pragmatic decisions about implementing a public health response effort, even for endemic diseases with which they are already familiar. Here, we describe the development of an application available on the internet, including from mobile devices, with a simple user interface, to support on-the-ground decision-making for integrating disease control programs, given local conditions and practical constraints. The model upon which the tool is built provides predictive analysis for the effectiveness of integration of schistosomiasis and malaria control, two diseases with extensive geographical and epidemiological overlap, and which result in significant morbidity and mortality in affected regions. Working with data from countries across sub-Saharan Africa and the Middle East, we present a proof-of-principle method and corresponding prototype tool to provide guidance on how to optimize integration of vertical disease control programs. This method and tool demonstrate significant progress in effectively translating the best available scientific models to support practical decision making on the ground with the potential to significantly increase the efficacy and cost-effectiveness of disease control. Author summary Designing and implementing effective programs for infectious disease control requires complex decision-making, informed by an understanding of the diseases, the types of disease interventions and control measures available, and the disease-relevant characteristics of the local community. Though disease modeling frameworks have been developed to address these questions and support decision-making, the complexity of current models presents a significant barrier to on-the-ground end users. The picture is further complicated when considering approaches for integration of different disease control programs, where co-infection dynamics, treatment interactions, and other variables must also be taken into account. Here, we describe the development of an application available on the internet with a simple user interface, to support on-the-ground decision-making for integrating disease control, given local conditions and practical constraints. The model upon which the tool is built provides predictive analysis for the effectiveness of integration of schistosomiasis and malaria control, two diseases with extensive geographical and epidemiological overlap. This proof-of-concept method and tool demonstrate significant progress in effectively translating the best available scientific models to support pragmatic decision-making on the ground, with the potential to significantly increase the impact and cost-effectiveness of disease control. PMID:29649260

Engaging and supporting fathers to promote breast feeding: a concept analysis.

PubMed

Sherriff, Nigel; Hall, Valerie; Panton, Christina

2014-06-01

Empirical evidence demonstrates that fathers have a strong influence on a mother's decision to initiate and continue breast feeding. However, no clear delineation of what behaviours and attributes constitute father support or differentiate it from other kinds of support is provided in the current literature. The purpose of this study was to analyse the concept of 'father support' in relation to maternity services and broader health settings, thereby clarifying meaning to enable comprehension and application in practice, education, and research. A concept analysis combining the evolutionary model of concept development with the inter-related theoretical, fieldwork and analytical phases of the hybrid model of concept development. Children's Centres in East and West Sussex in Southern England. Repeated qualitative research over two phases with 16 parents of breast fed infants through seven focus groups and five telephone interviews. CINAHL, PsycINFO, AMED, MEDLINE, OVID and EMBASE databases were searched for articles published in English between 1999 and 2013 using the keywords breast feeding, father, and support. Seven same-sex focus groups and five individual interviews were also conducted over two research phases with the parents of breast fed infants to expand and exemplify, and then validate the analysis of the literature search. Five main attributes of father support in relation to breast feeding were identified: (1) knowledge about breast feeding; (2) positive attitude to breast feeding; (3) involvement in the decision-making process; (4) practical support; and (5) emotional support. Multiple antecedents and consequences to these attributes were also identified. This study has contributed to clarifying the meaning of father support in relation to breast feeding and provides an important starting point for the development of a theoretical and practical model of optimal breast feeding that takes into account father support. Identification of attributes, antecedents, and consequences of father support may assist practitioners to reflect on current working practices and service delivery models, and offer important educational opportunities for the training of student midwives and other health professionals. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Teacher and student supports for implementation of the NGSS

NASA Astrophysics Data System (ADS)

Severance, Samuel

Through three articles, this dissertation examines the use of supports for implementing the Next Generation Science Standards (NGSS) within a large urban school district. Article one, titled Organizing for Teacher Agency in Curricular Co-design, examines the need for coherent curriculum materials that teachers' had a meaningful role in shaping and how the use of a co-design approach and specific tools and routines can help to address this need. Article two, titled Relevant Learning and Student Agency within a Citizen Science Design Challenge, examines the need for curriculum materials that provide students with learning experiences they find relevant and that expands their sense of agency and how a curriculum centered around a community-based citizen science design challenge can help achieve such an aim. Article three, titled Implementation of a Novel Professional Development Program to Support Teachers' Understanding of Modeling, examines the need for professional development that builds teachers' understanding of and skill in engaging their students in the practice of developing and using models and how a novel professional development program, the Next Generation Science Exemplar, can aid teachers in this regard by providing them with carefully sequenced professional development activities and specific modeling tools for use in the classroom.

First-Grade Teachers' Response to Three Models of Professional Development in Reading

ERIC Educational Resources Information Center

Carlisle, Joanne F.; Cortina, Kai Schnabel; Katz, Lauren A.

2011-01-01

The purpose of this study was to compare 1st-grade teachers' responses to professional development (PD) programs in reading that differed in means and degree of support for teachers' learning and efforts to improve their reading instruction. We compared 3 models of PD: the 1st model provided only seminars for the teachers, the 2nd model provided…

Measurement of Libby Amphibole (LA) Elongated Particle Dissolution Rates and Alteration of Size/Shape Distributions in Support of Human Dosimetry Model Development and Relative Potency Determinations

EPA Science Inventory

To maximize the value of toxicological data in development of human health risk assessment models of inhaled elongated mineral particles, improvements in human dosimetry modeling are needed. In order to extend the dosimetry model of deposited fibers (Asgharian et aI., Johnson 201...

Bayesian networks modelling in support to cross-cutting analysis of water supply and sanitation in developing countries

NASA Astrophysics Data System (ADS)

Dondeynaz, C.; López Puga, J.; Carmona Moreno, C.

2013-09-01

Despite the efforts made towards the Millennium Development Goals targets during the last decade, improved access to water supply or basic sanitation still remains unavailable for millions of people across the world. This paper proposes a set of models that use 25 key variables and country profiles from the WatSan4Dev data set involving water supply and sanitation (Dondeynaz et al., 2012). This paper suggests the use of Bayesian network modelling methods because they are more easily adapted to deal with non-normal distributions, and integrate a qualitative approach for data analysis. They also offer the advantage of integrating preliminary knowledge into the probabilistic models. The statistical performance of the proposed models ranges between 20 and 5% error rates, which are very satisfactory taking into account the strong heterogeneity of variables. Probabilistic scenarios run from the models allow an assessment of the relationships between human development, external support, governance aspects, economic activities and water supply and sanitation (WSS) access. According to models proposed in this paper, gaining a strong poverty reduction will require the WSS access to reach 75-76% through: (1) the management of ongoing urbanisation processes to avoid slums development; and (2) the improvement of health care, for instance for children. Improving governance, such as institutional efficiency, capacities to make and apply rules, or control of corruption is positively associated with WSS sustainable development. The first condition for an increment of the HDP (human development and poverty) remains of course an improvement of the economic conditions with higher household incomes. Moreover, a significant country commitment to the environment, associated with civil society freedom of expression constitutes a favourable setting for sustainable WSS services delivery. Intensive agriculture using irrigation practises also appears as a mean for sustainable WSS thanks to multi-uses and complementarities. With a WSS sector organised at national level, irrigation practices can support the structuring and efficiency of the agriculture sector. It may then induce rural development in areas where WSS access often is set back compared to urban areas1. External financial support, called Official Development Assistance (ODA CI), plays a role in WSS improvement but comes last in the sensitivity analyses of models. An overall 47% of the Official Development Assistance goes first to poor countries, and is associated to governance aspects: (1) political stability and (2) country commitment to the environment and civil society degree of freedom. These governance aspects constitute a good framework for aid implementation in recipient countries. Modelling is run with the five groups of countries as defined in Dondeynaz et al. (2012). Models for profile 4 (essential external support) and profile 5 (primary material consumption) are specifically detailed and analysed in this paper. For countries in profile 4, fighting against water scarcity and progressing desertification should be the priority. However, for countries in profile 5, efforts should first concentrate on consolidation of political stability while supporting diversification of the economic activities. Nevertheless, for both profiles, reduction of poverty should remain the first priority as previously indicated. 1 JMP statistics, 2004 http://www.wssinfo.org/data-estimates/table/, last access: 22 July 2013.

The determination of operational and support requirements and costs during the conceptual design of space systems

NASA Technical Reports Server (NTRS)

Ebeling, Charles; Beasley, Kenneth D.

1992-01-01

The first year of research to provide NASA support in predicting operational and support parameters and costs of proposed space systems is reported. Some of the specific research objectives were (1) to develop a methodology for deriving reliability and maintainability parameters and, based upon their estimates, determine the operational capability and support costs, and (2) to identify data sources and establish an initial data base to implement the methodology. Implementation of the methodology is accomplished through the development of a comprehensive computer model. While the model appears to work reasonably well when applied to aircraft systems, it was not accurate when used for space systems. The model is dynamic and should be updated as new data become available. It is particularly important to integrate the current aircraft data base with data obtained from the Space Shuttle and other space systems since subsystems unique to a space vehicle require data not available from aircraft. This research only addressed the major subsystems on the vehicle.

Fossil Energy Program

NASA Astrophysics Data System (ADS)

McNeese, L. E.

1981-01-01

Increased utilization of coal and other fossil fuel alternatives as sources of clean energy is reported. The following topics are discussed: coal conversion development, chemical research and development, materials technology, component development and process evaluation studies, technical support to major liquefaction projects, process analysis and engineering evaluations, fossil energy environmental analysis, flue gas desulfurization, solid waste disposal, coal preparation waste utilization, plant control development, atmospheric fluidized bed coal combustor for cogeneration, TVA FBC demonstration plant program technical support, PFBC systems analysis, fossil fuel applications assessments, performance assurance system support for fossil energy projects, international energy technology assessment, and general equilibrium models of liquid and gaseous fuel supplies.

Test Analysis Guidelines

NASA Technical Reports Server (NTRS)

Jeng, Frank F.

2007-01-01

Development of analysis guidelines for Exploration Life Support (ELS) technology tests was completed. The guidelines were developed based on analysis experiences gained from supporting Environmental Control and Life Support System (ECLSS) technology development in air revitalization systems and water recovery systems. Analyses are vital during all three phases of the ELS technology test: pre-test, during test and post test. Pre-test analyses of a test system help define hardware components, predict system and component performances, required test duration, sampling frequencies of operation parameters, etc. Analyses conducted during tests could verify the consistency of all the measurements and the performance of the test system. Post test analyses are an essential part of the test task. Results of post test analyses are an important factor in judging whether the technology development is a successful one. In addition, development of a rigorous model for a test system is an important objective of any new technology development. Test data analyses, especially post test data analyses, serve to verify the model. Test analyses have supported development of many ECLSS technologies. Some test analysis tasks in ECLSS technology development are listed in the Appendix. To have effective analysis support for ECLSS technology tests, analysis guidelines would be a useful tool. These test guidelines were developed based on experiences gained through previous analysis support of various ECLSS technology tests. A comment on analysis from an experienced NASA ECLSS manager (1) follows: "Bad analysis was one that bent the test to prove that the analysis was right to begin with. Good analysis was one that directed where the testing should go and also bridged the gap between the reality of the test facility and what was expected on orbit."

Proceedings of the Workshop on Government Oil Spill Modeling

NASA Technical Reports Server (NTRS)

Bishop, J. M. (Compiler)

1980-01-01

Oil spill model users and modelers were brought together for the purpose of fostering joint communication and increasing understanding of mutual problems. The workshop concentrated on defining user needs, presentations on ongoing modeling programs, and discussions of supporting research for these modeling efforts. Specific user recommendations include the development of an oil spill model user library which identifies and describes available models. The development of models for the long-term fate and effect of spilled oil was examined.

Dynamism in Electronic Performance Support Systems.

ERIC Educational Resources Information Center

Laffey, James

1995-01-01

Describes a model for dynamic electronic performance support systems based on NNAble, a system developed by the training group at Apple Computer. Principles for designing dynamic performance support are discussed, including a systems approach, performer-centered design, awareness of situated cognition, organizational memory, and technology use.…

Development of the REFOCUS intervention to increase mental health team support for personal recovery.

PubMed

Slade, Mike; Bird, Victoria; Le Boutillier, Clair; Farkas, Marianne; Grey, Barbara; Larsen, John; Leamy, Mary; Oades, Lindsay; Williams, Julie

2015-12-01

There is an emerging evidence base about best practice in supporting recovery. This is usually framed in relation to general principles, and specific pro-recovery interventions are lacking. To develop a theoretically based and empirically defensible new pro-recovery manualised intervention--called the REFOCUS intervention. Seven systematic and two narrative reviews were undertaken. Identified evidence gaps were addressed in three qualitative studies. The findings were synthesised to produce the REFOCUS intervention, manual and model. The REFOCUS intervention comprises two components: recovery-promoting relationships and working practices. Approaches to supporting relationships comprise coaching skills training for staff, developing a shared team understanding of recovery, exploring staff values, a Partnership Project with people who use the service and raising patient expectations. Working practices comprise the following: understanding values and treatment preferences; assessing strengths; and supporting goal-striving. The REFOCUS model describes the causal pathway from the REFOCUS intervention to improved recovery. The REFOCUS intervention is an empirically supported pro-recovery intervention for use in mental health services. It will be evaluated in a multisite cluster randomised controlled trial (ISRCTN02507940). © The Royal College of Psychiatrists 2015.

Open data models for smart health interconnected applications: the example of openEHR.

PubMed

Demski, Hans; Garde, Sebastian; Hildebrand, Claudia

2016-10-22

Smart Health is known as a concept that enhances networking, intelligent data processing and combining patient data with other parameters. Open data models can play an important role in creating a framework for providing interoperable data services that support the development of innovative Smart Health applications profiting from data fusion and sharing. This article describes a model-driven engineering approach based on standardized clinical information models and explores its application for the development of interoperable electronic health record systems. The following possible model-driven procedures were considered: provision of data schemes for data exchange, automated generation of artefacts for application development and native platforms that directly execute the models. The applicability of the approach in practice was examined using the openEHR framework as an example. A comprehensive infrastructure for model-driven engineering of electronic health records is presented using the example of the openEHR framework. It is shown that data schema definitions to be used in common practice software development processes can be derived from domain models. The capabilities for automatic creation of implementation artefacts (e.g., data entry forms) are demonstrated. Complementary programming libraries and frameworks that foster the use of open data models are introduced. Several compatible health data platforms are listed. They provide standard based interfaces for interconnecting with further applications. Open data models help build a framework for interoperable data services that support the development of innovative Smart Health applications. Related tools for model-driven application development foster semantic interoperability and interconnected innovative applications.

Selected options supporting use of the group embedded figures test in modeling achievement in clinical laboratory science programs.

PubMed

Powell, M E

1995-01-01

To identify, in light of predicted future shortages of allied-health personnel, student and curricular characteristics of clinical laboratory science (CLS) programs relevant to recruitment and retention at the baccalaureate level. Not applicable. Not applicable. Options for modeling achievement in CLS programs are developed, and designs and procedures for clarifying procedural questions are considered in a context of delivery of instruction for specialized curricula and skill development. Considerable attention is given to the potential for using the Group Embedded Figures Test (GEFT) in modeling, advising, designing curricula, and monitoring quality improvement of programs and graduates. Not applicable. Supporting evidence is supplied from the literature for options in developing an appropriate model for examining those salient variables known to have linkages to achievement. An argument is presented for better understanding of antecedent variables affecting achievement and retention of CLS students. In addition, a case is made for development of an appropriate model examining variables identified in the literature as being linked to achievement. Dynamic models based on these considerations should be developed chronologically from entry through graduation with emphasis on growth at year-end milestones.

Enhancing Schools’ Capacity to Support Children in Poverty: An Ecological Model of School-Based Mental Health Services

PubMed Central

Frazier, Stacy L.; Atkins, Marc S.; Schoenwald, Sonja K.; Glisson, Charles

2013-01-01

School based mental health services for children in poverty can capitalize on schools’ inherent capacity to support development and bridge home and neighborhood ecologies. We propose an ecological model informed by public health and organizational theories to refocus school based services in poor communities on the core function of schools to promote learning. We describe how coalescing mental health resources around school goals includes a focus on universal programming, mobilizing indigenous school and community resources, and supporting core teaching technologies. We suggest an iterative research–practice approach to program adaptation and implementation as a means toward advancing science and developing healthy children. PMID:18581225

Clinical, information and business process modeling to promote development of safe and flexible software.

PubMed

Liaw, Siaw-Teng; Deveny, Elizabeth; Morrison, Iain; Lewis, Bryn

2006-09-01

Using a factorial vignette survey and modeling methodology, we developed clinical and information models - incorporating evidence base, key concepts, relevant terms, decision-making and workflow needed to practice safely and effectively - to guide the development of an integrated rule-based knowledge module to support prescribing decisions in asthma. We identified workflows, decision-making factors, factor use, and clinician information requirements. The Unified Modeling Language (UML) and public domain software and knowledge engineering tools (e.g. Protégé) were used, with the Australian GP Data Model as the starting point for expressing information needs. A Web Services service-oriented architecture approach was adopted within which to express functional needs, and clinical processes and workflows were expressed in the Business Process Execution Language (BPEL). This formal analysis and modeling methodology to define and capture the process and logic of prescribing best practice in a reference implementation is fundamental to tackling deficiencies in prescribing decision support software.

Progress in and prospects for fluvial flood modelling.

PubMed

Wheater, H S

2002-07-15

Recent floods in the UK have raised public and political awareness of flood risk. There is an increasing recognition that flood management and land-use planning are linked, and that decision-support modelling tools are required to address issues of climate and land-use change for integrated catchment management. In this paper, the scientific context for fluvial flood modelling is discussed, current modelling capability is considered and research challenges are identified. Priorities include (i) appropriate representation of spatial precipitation, including scenarios of climate change; (ii) development of a national capability for continuous hydrological simulation of ungauged catchments; (iii) improved scientific understanding of impacts of agricultural land-use and land-management change, and the development of new modelling approaches to represent those impacts; (iv) improved representation of urban flooding, at both local and catchment scale; (v) appropriate parametrizations for hydraulic simulation of in-channel and flood-plain flows, assimilating available ground observations and remotely sensed data; and (vi) a flexible decision-support modelling framework, incorporating developments in computing, data availability, data assimilation and uncertainty analysis.

Space Station Freedom ECLSS: A step toward autonomous regenerative life support systems

NASA Technical Reports Server (NTRS)

Dewberry, Brandon S.

1990-01-01

The Environmental Control and Life Support System (ECLSS) is a Freedom Station distributed system with inherent applicability to extensive automation primarily due to its comparatively long control system latencies. These allow longer contemplation times in which to form a more intelligent control strategy and to prevent and diagnose faults. The regenerative nature of the Space Station Freedom ECLSS will contribute closed loop complexities never before encountered in life support systems. A study to determine ECLSS automation approaches has been completed. The ECLSS baseline software and system processes could be augmented with more advanced fault management and regenerative control systems for a more autonomous evolutionary system, as well as serving as a firm foundation for future regenerative life support systems. Emerging advanced software technology and tools can be successfully applied to fault management, but a fully automated life support system will require research and development of regenerative control systems and models. The baseline Environmental Control and Life Support System utilizes ground tests in development of batch chemical and microbial control processes. Long duration regenerative life support systems will require more active chemical and microbial feedback control systems which, in turn, will require advancements in regenerative life support models and tools. These models can be verified using ground and on orbit life support test and operational data, and used in the engineering analysis of proposed intelligent instrumentation feedback and flexible process control technologies for future autonomous regenerative life support systems, including the evolutionary Space Station Freedom ECLSS.

Analysis of Advanced Respiratory Support Onboard ISS and CCV

NASA Technical Reports Server (NTRS)

Shah, Ronak V.; Kertsman, Eric L.; Alexander, David J.; Duchesne, Ted; Law, Jennifer; Roden, Sean K.

2014-01-01

NASA is collaborating with private entities for the development of commercial space vehicles. The Space and Clinical Operations Division was tasked to review the oxygen and respiratory support system and recommend what capabilities, if any, the vehicle should have to support the return of an ill or injured crewmember. The Integrated Medical Model (IMM) was utilized as a data source for the development of these recommendations. The Integrated Medical Model (IMM) was used to simulate a six month, six crew, International Space Station (ISS) mission. Three medical system scenarios were considered based on the availability of (1) oxygen only, (2) oxygen and a ventilator, or (3) neither oxygen nor ventilator. The IMM analysis provided probability estimates of medical events that would require either oxygen or ventilator support. It also provided estimates of crew health, the probability of evacuation, and the probability of loss of crew life secondary to medical events for each of the three medical system scenarios. These IMM outputs were used as objective data to enable evidence-based decisions regarding oxygen and respiratory support system requirements for commercial crew vehicles. The IMM provides data that may be utilized to support informed decisions regarding the development of medical systems for commercial crew vehicles.

Tethys: A Platform for Water Resources Modeling and Decision Support Apps

NASA Astrophysics Data System (ADS)

Nelson, J.; Swain, N. R.

2015-12-01

The interactive nature of web applications or "web apps" makes it an excellent medium for conveying complex scientific concepts to lay audiences and creating decision support tools that harness cutting edge modeling techniques. However, the technical expertise required to develop web apps represents a barrier for would-be developers. This barrier can be characterized by the following hurdles that developers must overcome: (1) identify, select, and install software that meet the spatial and computational capabilities commonly required for water resources modeling; (2) orchestrate the use of multiple free and open source (FOSS) projects and navigate their differing application programming interfaces; (3) learn the multi-language programming skills required for modern web development; and (4) develop a web-secure and fully featured web portal to host the app. Tethys Platform has been developed to lower the technical barrier and minimize the initial development investment that prohibits many scientists and engineers from making use of the web app medium. It includes (1) a suite of FOSS that address the unique data and computational needs common to water resources web app development, (2) a Python software development kit that streamlines development, and (3) a customizable web portal that is used to deploy the completed web apps. Tethys synthesizes several software projects including PostGIS, 52°North WPS, GeoServer, Google Maps™, OpenLayers, and Highcharts. It has been used to develop a broad array of web apps for water resources modeling and decision support for several projects including CI-WATER, HydroShare, and the National Flood Interoperability Experiment. The presentation will include live demos of some of the apps that have been developed using Tethys to demonstrate its capabilities.

The development and application of a decision support system for land management in the Lake Tahoe Basin—The Land Use Simulation Model

USGS Publications Warehouse

Forney, William M.; Oldham, I. Benson; Crescenti, Neil

2013-01-01

This report describes and applies the Land Use Simulation Model (LUSM), the final modeling product for the long-term decision support project funded by the Southern Nevada Public Land Management Act and developed by the U.S. Geological Survey’s Western Geographic Science Center for the Lake Tahoe Basin. Within the context of the natural-resource management and anthropogenic issues of the basin and in an effort to advance land-use and land-cover change science, this report addresses the problem of developing the LUSM as a decision support system. It includes consideration of land-use modeling theory, fire modeling and disturbance in the wildland-urban interface, historical land-use change and its relation to active land management, hydrologic modeling and the impact of urbanization as related to the Lahontan Regional Water Quality Control Board’s recently developed Total Maximum Daily Load report for the basin, and biodiversity in urbanizing areas. The LUSM strives to inform land-management decisions in a complex regulatory environment by simulating parcel-based, land-use transitions with a stochastic, spatially constrained, agent-based model. The tool is intended to be useful for multiple purposes, including the multiagency Pathway 2007 regional planning effort, the Tahoe Regional Planning Agency (TRPA) Regional Plan Update, and complementary research endeavors and natural-resource-management efforts. The LUSM is an Internet-based, scenario-generation decision support tool for allocating retired and developed parcels over the next 20 years. Because USGS staff worked closely with TRPA staff and their “Code of Ordinances” and analyzed datasets of historical management and land-use practices, this report accomplishes the task of providing reasonable default values for a baseline scenario that can be used in the LUSM. One result from the baseline scenario for the model suggests that all vacant parcels could be allocated within 12 years. Results also include: assessment of model functionality, brief descriptions of the 7 basic output tables, assessment of the rate of change in land-use allocation pools over time, locations and amounts of the spatially explicit probabilities of land-use transitions by real estate commodity, and analysis of the state change from today’s existing land cover to potential land uses in the future. Assumptions and limitations of the model are presented. This report concludes with suggested next steps to support the continued utility of the LUSM and additional research avenues.

A Nurse-Led Innovation in Education: Implementing a Collaborative Multidisciplinary Grand Rounds.

PubMed

Matamoros, Lisa; Cook, Michelle

2017-08-01

Multidisciplinary grand rounds provides an opportunity to promote excellence in patient care through scholarly presentations and interdisciplinary collaboration with an innovative approach. In addition, multidisciplinary grand rounds serves to recognize expertise of staff, mentor and support professional development, and provide a collaborative environment across all clinical disciplines and support services. This article describes a process model developed by nurse educators for implementing a multidisciplinary grand rounds program. The components of the process model include topic submissions, coaching presenters, presentations, evaluations, and spreading the work. This model can be easily implemented at any organization. J Contin Educ Nurs. 2017;48(8):353-357. Copyright 2017, SLACK Incorporated.

L3:PHI.CMD.P13.02 Support for CILC L1 Milestone Using STAR-CCM+

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slattery, Stuart R.; Gurecky, William L.

2016-10-07

This report documents work performed to support Consortium for the Advanced Simulation of LWRs (CASL) modeling of Chalk River Unidentified Deposit (CRUD) Induced Power Shift (CIPS) and CRUD Induced Local Corrosion (CILC) using the Cicada package. The work documented here is intended to complement current and future CIPS and CILC modeling activities in CASL. We provide tools for crud and corrosion-related simulation and analysis by developing a better understanding of the interplay between the coupled physics that describe the phenomena at different time and length scales. We intend to use these models to better inform future simulation capability and development.

Students' Development of Structure Sense for the Distributive Law

ERIC Educational Resources Information Center

Schüler-Meyer, Alexander

2017-01-01

After being introduced to the distributive law in meaningful contexts, students need to extend its scope of application to unfamiliar expressions. In this article, a process model for the development of structure sense is developed. Building on this model, this article reports on a design research project in which exercise tasks support students…

A quantitative risk model for early lifecycle decision making

NASA Technical Reports Server (NTRS)

Feather, M. S.; Cornford, S. L.; Dunphy, J.; Hicks, K.

2002-01-01

Decisions made in the earliest phases of system development have the most leverage to influence the success of the entire development effort, and yet must be made when information is incomplete and uncertain. We have developed a scalable cost-benefit model to support this critical phase of early-lifecycle decision-making.

A Causal Modelling Approach to the Development of Theory-Based Behaviour Change Programmes for Trial Evaluation

ERIC Educational Resources Information Center

Hardeman, Wendy; Sutton, Stephen; Griffin, Simon; Johnston, Marie; White, Anthony; Wareham, Nicholas J.; Kinmonth, Ann Louise

2005-01-01

Theory-based intervention programmes to support health-related behaviour change aim to increase health impact and improve understanding of mechanisms of behaviour change. However, the science of intervention development remains at an early stage. We present a causal modelling approach to developing complex interventions for evaluation in…

The Contributions of Emotional Intelligence and Social Support for Adaptive Career Progress among Italian Youth

ERIC Educational Resources Information Center

Di Fabio, Annamaria; Kenny, Maureen E.

2015-01-01

Drawing from career construction and positive youth development perspectives, this study explores, among 254 Italian high school students, the relationship between emotional intelligence (EI) and support from friends and teachers with indices of adaptive career development. Results from the full canonical correlational model revealed that…

Model of Early Support of Child Development in Poland

ERIC Educational Resources Information Center

Czyz, Anna Katarzyna

2018-01-01

The development of a child, especially a child with a disability, is conditional upon the initiation of rehabilitation measures immediately after the problem has been identified. The quality of the reaction is conditioned by the functioning of the therapeutic team. The main purpose of the research was the diagnosis of early support system for…

Building Social-Aware Software Applications for the Interactive Learning Age

ERIC Educational Resources Information Center

Capuruco, Renato A. C.; Capretz, Luiz F.

2009-01-01

There have been a number of frameworks and models developed to support different aspects of interactive learning. Some were developed to deal with course design through the application of authoring tools, whereas others such as conversational, advisory, and ontology-based systems were used in virtual classrooms to improve and support collaborative…

Choosing a STEM Path: "Course-Sequencing in High School and Postsecondary Outcomes"

ERIC Educational Resources Information Center

Lee, Jonghwan; Judy, Justina

2011-01-01

The College Ambition Program (CAP) model was developed to support high schools in preparing their students to enter STEM fields. CAP includes four programmatic components: mentoring, course counseling and advising, college-related activities and workshops, and teacher professional development and instructional support. This study is part of a…

Towards automated traceability maintenance

PubMed Central

Mäder, Patrick; Gotel, Orlena

2012-01-01

Traceability relations support stakeholders in understanding the dependencies between artifacts created during the development of a software system and thus enable many development-related tasks. To ensure that the anticipated benefits of these tasks can be realized, it is necessary to have an up-to-date set of traceability relations between the established artifacts. This goal requires the creation of traceability relations during the initial development process. Furthermore, the goal also requires the maintenance of traceability relations over time as the software system evolves in order to prevent their decay. In this paper, an approach is discussed that supports the (semi-) automated update of traceability relations between requirements, analysis and design models of software systems expressed in the UML. This is made possible by analyzing change events that have been captured while working within a third-party UML modeling tool. Within the captured flow of events, development activities comprised of several events are recognized. These are matched with predefined rules that direct the update of impacted traceability relations. The overall approach is supported by a prototype tool and empirical results on the effectiveness of tool-supported traceability maintenance are provided. PMID:23471308

Integrating hydrologic modeling web services with online data sharing to prepare, store, and execute models in hydrology

NASA Astrophysics Data System (ADS)

Gan, T.; Tarboton, D. G.; Dash, P. K.; Gichamo, T.; Horsburgh, J. S.

2017-12-01

Web based apps, web services and online data and model sharing technology are becoming increasingly available to support research. This promises benefits in terms of collaboration, platform independence, transparency and reproducibility of modeling workflows and results. However, challenges still exist in real application of these capabilities and the programming skills researchers need to use them. In this research we combined hydrologic modeling web services with an online data and model sharing system to develop functionality to support reproducible hydrologic modeling work. We used HydroDS, a system that provides web services for input data preparation and execution of a snowmelt model, and HydroShare, a hydrologic information system that supports the sharing of hydrologic data, model and analysis tools. To make the web services easy to use, we developed a HydroShare app (based on the Tethys platform) to serve as a browser based user interface for HydroDS. In this integration, HydroDS receives web requests from the HydroShare app to process the data and execute the model. HydroShare supports storage and sharing of the results generated by HydroDS web services. The snowmelt modeling example served as a use case to test and evaluate this approach. We show that, after the integration, users can prepare model inputs or execute the model through the web user interface of the HydroShare app without writing program code. The model input/output files and metadata describing the model instance are stored and shared in HydroShare. These files include a Python script that is automatically generated by the HydroShare app to document and reproduce the model input preparation workflow. Once stored in HydroShare, inputs and results can be shared with other users, or published so that other users can directly discover, repeat or modify the modeling work. This approach provides a collaborative environment that integrates hydrologic web services with a data and model sharing system to enable model development and execution. The entire system comprised of the HydroShare app, HydroShare and HydroDS web services is open source and contributes to capability for web based modeling research.

Globalizing Lessons Learned from Regional-scale Observatories

NASA Astrophysics Data System (ADS)

Glenn, S. M.

2016-02-01

The Mid Atlantic Regional Association Coastal Ocean Observing System (MARACOOS) has accumulated a decade of experience designing, building and operating a Regional Coastal Ocean Observing System for the U.S. Integrated Ocean Observing System (IOOS). MARACOOS serves societal goals and supports scientific discovery at the scale of a Large Marine Ecosystem (LME). Societal themes include maritime safety, ecosystem decision support, coastal inundation, water quality and offshore energy. Scientific results that feed back on societal goals with better products include improved understanding of seasonal transport pathways and their impact on phytoplankton blooms and hypoxia, seasonal evolution of the subsurface Mid Atlantic Cold Pool and its impact on fisheries, biogeochemical transformations in coastal plumes, coastal ocean evolution and impact on hurricane intensities, and storm sediment transport pathways. As the global ocean observing requirements grow to support additional societal needs for information on fisheries and aquaculture, ocean acidification and deoxygenation, water quality and offshore development, global observing will necessarily evolve to include more coastal observations and forecast models at the scale of the world's many LMEs. Here we describe our efforts to share lessons learned between the observatory operators at the regional-scale of the LMEs. Current collaborators are spread across Europe, and also include Korea, Indonesia, Australia, Brazil and South Africa. Specific examples include the development of a world standard QA/QC approach for HF Radar data that will foster the sharing of data between countries, basin-scale underwater glider missions between internationally-distributed glider ports to developed a shared understanding of operations and an ongoing evaluation of the global ocean models in which the regional models for the LME will be nested, and joint training programs to develop the distributed teams of scientists and technicians required to support the global network. Globalization includes the development of international networks to coordinate activities, such as the Global HF Radar network supported by GEO, the global Everyone's Glider Organization supported by WMO and IOC, and the need for professional training supported by MTS.

Family Engagement in Literacy Activities: Revised Factor Structure for the Familia--An Instrument Examining Family Support for Early Literacy Development

ERIC Educational Resources Information Center

Buhs, Eric S.; Welch, Greg; Burt, Jennifer; Knoche, Lisa

2011-01-01

This study evaluated a data-set drawn using "The Familia"--a measure originally developed to evaluate shared-reading activities. A newly developed set of conceptual supports and a confirmatory factor analysis (CFA) were applied to a new factor structure/model. Data were drawn from 219 young children and their families (mean age = 43…

Attachment-based family therapy for depressed and suicidal adolescents: theory, clinical model and empirical support.

PubMed

Ewing, E Stephanie Krauthamer; Diamond, Guy; Levy, Suzanne

2015-01-01

Attachment-Based Family Therapy (ABFT) is a manualized family-based intervention designed for working with depressed adolescents, including those at risk for suicide, and their families. It is an empirically informed and supported treatment. ABFT has its theoretical underpinnings in attachment theory and clinical roots in structural family therapy and emotion focused therapies. ABFT relies on a transactional model that aims to transform the quality of adolescent-parent attachment, as a means of providing the adolescent with a more secure relationship that can support them during challenging times generally, and the crises related to suicidal thinking and behavior, specifically. This article reviews: (1) the theoretical foundations of ABFT (attachment theory, models of emotional development); (2) the ABFT clinical model, including training and supervision factors; and (3) empirical support.

Memory mechanisms supporting syntactic comprehension.

PubMed

Caplan, David; Waters, Gloria

2013-04-01

Efforts to characterize the memory system that supports sentence comprehension have historically drawn extensively on short-term memory as a source of mechanisms that might apply to sentences. The focus of these efforts has changed significantly in the past decade. As a result of changes in models of short-term working memory (ST-WM) and developments in models of sentence comprehension, the effort to relate entire components of an ST-WM system, such as those in the model developed by Baddeley (Nature Reviews Neuroscience 4: 829-839, 2003) to sentence comprehension has largely been replaced by an effort to relate more specific mechanisms found in modern models of ST-WM to memory processes that support one aspect of sentence comprehension--the assignment of syntactic structure (parsing) and its use in determining sentence meaning (interpretation) during sentence comprehension. In this article, we present the historical background to recent studies of the memory mechanisms that support parsing and interpretation and review recent research into this relation. We argue that the results of this research do not converge on a set of mechanisms derived from ST-WM that apply to parsing and interpretation. We argue that the memory mechanisms supporting parsing and interpretation have features that characterize another memory system that has been postulated to account for skilled performance-long-term working memory. We propose a model of the relation of different aspects of parsing and interpretation to ST-WM and long-term working memory.

How the 'warped' relationships between nurses' emotions, attitudes, social support and perceived organizational conditions impact customer orientation.

PubMed

Gountas, Sandra; Gountas, John

2016-02-01

Much research focuses on organizational culture and its impact on customer orientation or emotional states and their impact on job satisfaction and well-being. This study aims to combine the complex roles of nurses' emotion states and job satisfaction in a model that identifies the effects of standards for service delivery (organizational culture), supervisor and co-worker support and the development of customer orientation. A previous study examined the relationships between nurses' personal resources, job satisfaction and customer orientation. This study examines how these variables relate to organizational standards and social support. A cross-sectional survey using a self-completion questionnaire with validated, existing scales to measure standards for service delivery, supervisor and co-worker support, job satisfaction, empathic concern, emotional exhaustion and customer orientation. Nurses (159) completed the questionnaire in 2010. The data were analysed using WarpPLS, a structural equation modelling software package. The results indicate that the final model fits the data well and explains 84% of the variance in customer orientation. The findings show the importance of standard for service delivery (organizational culture), supervisor and co-worker support on customer orientation. Nurses' personal resources interact with these, particularly supervisor and co-worker support, to develop staff job satisfaction and empathy. The need for support mechanisms in stressful times is discussed. We propose that training in compassion and empathy would help leaders to model desirable attributes that contribute towards customer orientation. © 2015 John Wiley & Sons Ltd.

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar The Mesoscale Modeling Branch conducts a program of research and development in support of the prediction. This research and development includes mesoscale four-dimensional data assimilation of domestic

Predictive Software Cost Model Study. Volume I. Final Technical Report.

DTIC Science & Technology

1980-06-01

development phase to identify computer resources necessary to support computer programs after transfer of program manangement responsibility and system... classical model development with refinements specifically applicable to avionics systems. The refinements are the result of the Phase I literature search

Professional Development to Promote Teacher Adaptability

ERIC Educational Resources Information Center

Parsons, Allison Ward; Ankrum, Julie Winneur; Morewood, Aimee

2016-01-01

Effective professional development (PD) follows adaptive teaching principles; it increases teacher understanding and instructional purpose, which ultimately supports and extends adaptive teaching. Through this article, we compare and contrast training models with educative models of PD (Duffy, 2004). We discuss characteristics of effective PD that…

Bayesian networks modelling in support to cross cutting analysis of water supply and sanitation in developing countries

NASA Astrophysics Data System (ADS)

Dondeynaz, C.; López Puga, J.; Carmona Moreno, C.

2013-02-01

Despite the efforts made towards the millennium goals targets during the last decade, access to improved water supply or basic sanitation remains still not accessible for millions of people across the world. This paper proposes a set of models that use 25 key variables from the WatSan4Dev dataset and country profiles involving Water Supply and Sanitation (Dondeynaz et al., 2012). This paper proposes the use of Bayesian Network modelling methods because adapted to the management of non-normal distribution, and integrate a qualitative approach for data analysis. They also offer the advantage to integrate preliminary knowledge into the probabilistic models. The statistical performance of the proposed models ranges between 80 and 95% which is very satisfactory taking into account the strong heterogeneity of variables. Probabilistic scenarios run from the models allow a quantification of the relationships between human development, external support, governance aspects, economic activities and Water Supply and Sanitation (WSS) access. According to models proposed in this paper, a strong poverty reduction will induce an increment of the WSS access equal to 75-76% through: (1) the organisation of on-going urbanisation process to avoid slums development; and, (2) the improvement of health care for instance for children. On one side, improving governance, such as institutional efficiency, capacities to make and apply rules or control of corruption will also have a positive impact on WSS sustainable development. The first condition for an increment of the WSS access remains of course an improvement of the economic development with an increment of household income. Moreover, a significant country environmental commitment associated with civil society freedom of expression constitutes a favourable environment for sustainable WSS services delivery. Intensive agriculture through irrigation practises also appears as a mean for sustainable WSS thanks to multi-uses and complementarities. Strong and structured agriculture sector facilitates rural development in areas where WSS access often steps behind compared to urban areas1. External financial support, named Official Development Aid (ODA), plays a role in WSS improvement but comes last in the sensitivity analyses of models. This aid supports first poor countries at 47%, and is associated to governance aspects: (1) political stability and (2) country environmental commitment and civil society degree of freedom. These governance aspects constitute a good framework for aid implementation in recipient countries. Modelling is run with the five groups of countries as defined in Dondeynaz et al. (2012). Models for profile 4 (essential external support) and profile 5 (primary material consumption) are specifically detailed and analysed in this paper. For countries in profile 4, to fight against water scarcity and desertification pressure should be the priority. However, for countries in profile 5, efforts should first concentrate on political stability consolidation while supporting economic activity diversification. Nevertheless, for both profiles, reduction of poverty should remain the first priority as previously indicated. 1 JMP statistics, 2004 http://www.wssinfo.org/data-estimates/table/

Someone To Talk to and Someone To Listen. The Development of a Support and Learning Network for Palliative Care Workers in the Country Area of the Barossa Valley in South Australia.

ERIC Educational Resources Information Center

Elsey, Barry

A palliative care support and training network was developed in a relatively isolated country area of the Barossa Valley in South Australia. The project was intended to help palliative care workers, volunteers, home carers, and others work collaboratively as a team (holistic model) for the purposes of mutually supporting, sharing information and…

Effective Schoolwide Screening to Identify Students at Risk for Social and Behavioral Problems

ERIC Educational Resources Information Center

Walker, Bridget A.

2010-01-01

Many schools are developing a continuum of services and supports for students who may be struggling in school, whether through a response to intervention (RTI) model or a schoolwide positive behavior supports (SWPBS) model. Study results suggest that schools will not be effective if they focus solely on identifying and responding to student…

A Human Resource Development Performance Improvement Model for Workers with Mental Retardation in Supported Employment

ERIC Educational Resources Information Center

Fornes, Sandra; Rosenberg, Howard; Rocco, Tonette S.; Gallagher, Jo

2006-01-01

This literature review discusses the factors for successful job retention of adult workers with mental retardation (MR) including external factors related to work environments and internal issues of the individual worker. Through the synthesis of the literature, a performance improvement model for supported employment (SE) is discussed based on…

Cognitive Demand of Model Tracing Tutor Tasks: Conceptualizing and Predicting How Deeply Students Engage

ERIC Educational Resources Information Center

Kessler, Aaron M.; Stein, Mary Kay; Schunn, Christian D.

2015-01-01

Model tracing tutors represent a technology designed to mimic key elements of one-on-one human tutoring. We examine the situations in which such supportive computer technologies may devolve into mindless student work with little conceptual understanding or student development. To analyze the support of student intellectual work in the model…

Supporting Smart School Teachers' Continuing Professional Development in and through ICT: A Model for Change

ERIC Educational Resources Information Center

Ming, Thang Siew; Hall, Carol; Azman, Hazita; Joyes, Gordon

2010-01-01

The general assumption that once the hardware is introduced in schools, ICT integration will automatically follow is not necessarily true. Teachers need to be supported and factors responsible for teachers' failure to integrate ICT into the classrooms identified and rectified. The paper proposes an online model based on the Improvement Quality…

Towards a Pedagogical Model for Science Education: Bridging Educational Contexts through a Blended Learning Approach

ERIC Educational Resources Information Center

Bidarra, José; Rusman, Ellen

2017-01-01

This paper proposes a design framework to support science education through blended learning, based on a participatory and interactive approach supported by ICT-based tools, called "Science Learning Activities Model" (SLAM). The development of this design framework started as a response to complex changes in society and education (e.g.…

Demonstration of reduced-order urban scale building energy models

DOE PAGES

Heidarinejad, Mohammad; Mattise, Nicholas; Dahlhausen, Matthew; ...

2017-09-08

The aim of this study is to demonstrate a developed framework to rapidly create urban scale reduced-order building energy models using a systematic summary of the simplifications required for the representation of building exterior and thermal zones. These urban scale reduced-order models rely on the contribution of influential variables to the internal, external, and system thermal loads. OpenStudio Application Programming Interface (API) serves as a tool to automate the process of model creation and demonstrate the developed framework. The results of this study show that the accuracy of the developed reduced-order building energy models varies only up to 10% withmore » the selection of different thermal zones. In addition, to assess complexity of the developed reduced-order building energy models, this study develops a novel framework to quantify complexity of the building energy models. Consequently, this study empowers the building energy modelers to quantify their building energy model systematically in order to report the model complexity alongside the building energy model accuracy. An exhaustive analysis on four university campuses suggests that the urban neighborhood buildings lend themselves to simplified typical shapes. Specifically, building energy modelers can utilize the developed typical shapes to represent more than 80% of the U.S. buildings documented in the CBECS database. One main benefits of this developed framework is the opportunity for different models including airflow and solar radiation models to share the same exterior representation, allowing a unifying exchange data. Altogether, the results of this study have implications for a large-scale modeling of buildings in support of urban energy consumption analyses or assessment of a large number of alternative solutions in support of retrofit decision-making in the building industry.« less

Demonstration of reduced-order urban scale building energy models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heidarinejad, Mohammad; Mattise, Nicholas; Dahlhausen, Matthew

The aim of this study is to demonstrate a developed framework to rapidly create urban scale reduced-order building energy models using a systematic summary of the simplifications required for the representation of building exterior and thermal zones. These urban scale reduced-order models rely on the contribution of influential variables to the internal, external, and system thermal loads. OpenStudio Application Programming Interface (API) serves as a tool to automate the process of model creation and demonstrate the developed framework. The results of this study show that the accuracy of the developed reduced-order building energy models varies only up to 10% withmore » the selection of different thermal zones. In addition, to assess complexity of the developed reduced-order building energy models, this study develops a novel framework to quantify complexity of the building energy models. Consequently, this study empowers the building energy modelers to quantify their building energy model systematically in order to report the model complexity alongside the building energy model accuracy. An exhaustive analysis on four university campuses suggests that the urban neighborhood buildings lend themselves to simplified typical shapes. Specifically, building energy modelers can utilize the developed typical shapes to represent more than 80% of the U.S. buildings documented in the CBECS database. One main benefits of this developed framework is the opportunity for different models including airflow and solar radiation models to share the same exterior representation, allowing a unifying exchange data. Altogether, the results of this study have implications for a large-scale modeling of buildings in support of urban energy consumption analyses or assessment of a large number of alternative solutions in support of retrofit decision-making in the building industry.« less

HRST architecture modeling and assessments

NASA Astrophysics Data System (ADS)

Comstock, Douglas A.

1997-01-01

This paper presents work supporting the assessment of advanced concept options for the Highly Reusable Space Transportation (HRST) study. It describes the development of computer models as the basis for creating an integrated capability to evaluate the economic feasibility and sustainability of a variety of system architectures. It summarizes modeling capabilities for use on the HRST study to perform sensitivity analysis of alternative architectures (consisting of different combinations of highly reusable vehicles, launch assist systems, and alternative operations and support concepts) in terms of cost, schedule, performance, and demand. In addition, the identification and preliminary assessment of alternative market segments for HRST applications, such as space manufacturing, space tourism, etc., is described. Finally, the development of an initial prototype model that can begin to be used for modeling alternative HRST concepts at the system level is presented.

The determination of operational and support requirements and costs during the conceptual design of space systems

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1991-01-01

The primary objective is to develop a methodology for predicting operational and support parameters and costs of proposed space systems. The first phase consists of: (1) the identification of data sources; (2) the development of a methodology for determining system reliability and maintainability parameters; (3) the implementation of the methodology through the use of prototypes; and (4) support in the development of an integrated computer model. The phase 1 results are documented and a direction is identified to proceed to accomplish the overall objective.

Crew appliance study

NASA Technical Reports Server (NTRS)

Proctor, B. W.; Reysa, R. P.; Russell, D. J.

1975-01-01

Viable crew appliance concepts were identified by means of a thorough literature search. Studies were made of the food management, personal hygiene, housekeeping, and off-duty habitability functions to determine which concepts best satisfy the Space Shuttle Orbiter and Modular Space Station mission requirements. Models of selected appliance concepts not currently included in the generalized environmental-thermal control and life support systems computer program were developed and validated. Development plans of selected concepts were generated for future reference. A shuttle freezer conceptual design was developed and a test support activity was provided for regenerative environmental control life support subsystems.

Supportive care for older people with frailty in hospital: An integrative review.

PubMed

Nicholson, Caroline; Morrow, Elizabeth M; Hicks, Allan; Fitzpatrick, Joanne

2017-01-01

Growing numbers of older people living with frailty and chronic health conditions are being referred to hospitals with acute care needs. Supportive care is a potentially highly relevant and clinically important approach which could bridge the practice gap between curative models of care and palliative care. However, future interventions need to be informed and underpinned by existing knowledge of supportive care. To identify and build upon existing theories and evidence about supportive care, specifically in relation to the hospital care of older people with frailty, to inform future interventions and their evaluation. An integrative review was used to identify and integrate theory and evidence. Electronic databases (Cochrane Medline, EMBASE and CIHAHL) were searched using the key term 'supportive care'. Screening identified studies employing qualitative and/or quantitative methods published between January 1990 and December 2015. Citation searches, reference checking and searches of the grey literature were also undertaken. Literature searches identified 2733 articles. After screening, and applying eligibility criteria based on relevance to the research question, studies were subject to methodological quality appraisal. Findings from included articles (n=52) were integrated using synthesis of themes. Relevant evidence was identified across different research literatures, on clinical conditions and contexts. Seven distinct themes of the synthesis were identified, these were: Ensuring fundamental aspects of care are met, Communicating and connecting with the patient, Carer and family engagement, Building up a picture of the person and their circumstances, Decisions and advice about best care for the person, Enabling self-help and connection to wider support, and Supporting patients through transitions in care. A tentative integrative model of supportive care for frail older people is developed from the findings. The findings and model developed here will inform future interventions and can help staff and hospital managers to develop appropriate strategies, staff training and resource allocation models to improve the quality of health care for older people. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

ATAMM enhancement and multiprocessor performance evaluation

NASA Technical Reports Server (NTRS)

Stoughton, John W.; Mielke, Roland R.; Som, Sukhamoy; Obando, Rodrigo; Malekpour, Mahyar R.; Jones, Robert L., III; Mandala, Brij Mohan V.

1991-01-01

ATAMM (Algorithm To Architecture Mapping Model) enhancement and multiprocessor performance evaluation is discussed. The following topics are included: the ATAMM model; ATAMM enhancement; ADM (Advanced Development Model) implementation of ATAMM; and ATAMM support tools.

Solid waste projection model: Model version 1. 0 technical reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkins, M.L.; Crow, V.L.; Buska, D.E.

1990-11-01

The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC). The SWPM system provides a modeling and analysis environment that supports decisions in the process of evaluating various solid waste management alternatives. This document, one of a series describing the SWPM system, contains detailed information regarding the software utilized in developing Version 1.0 of the modeling unit of SWPM. This document is intended for use by experienced software engineers and supports programming, code maintenance, and model enhancement. Those interested in using SWPM should refer to the SWPM Modelmore » User's Guide. This document is available from either the PNL project manager (D. L. Stiles, 509-376-4154) or the WHC program monitor (B. C. Anderson, 509-373-2796). 8 figs.« less

A predictive model of Health Related Quality of life of parents of chronically ill children: the importance of care-dependency of their child and their support system.

PubMed

Hatzmann, Janneke; Maurice-Stam, Heleen; Heymans, Hugo S A; Grootenhuis, Martha A

2009-07-28

Parents of chronically ill children are at risk for a lower Health Related Quality of Life (HRQoL). Insight in the dynamics of factors influencing parental HRQoL is necessary for development of interventions. Aim of the present study was to explore the influence of demographic and disease related factors on parental HRQoL, mediated by employment, income, leisure time, holiday and emotional support in a comprehensive model. In a cross-sectional design, 543 parents of chronically ill children completed questionnaires. A conceptual model of parental HRQoL was developed. Structural equation modeling was performed to explore the relations in the conceptual model, and to test if the model fitted the data. The model fitted the data closely (CHISQ(14) = 11.37, p = 0.66; RMSEA = 0.0, 90%CI [0.00;0.034]. The effect of socio-demographic and medical data on HRQoL was mediated by days on holiday (MCS: beta = .21) and emotional support (PCS: beta = .14; MCS: beta = .28). Also, female gender (beta = -.10), age (beta = .10), being chronically ill as a parent (beta = -.34), and care dependency of the child (beta = -.14; beta = -.15) were directly related to parental HRQoL. The final model was slightly different from the conceptual model. Main factors explaining parental HRQoL seemed to be emotional support, care dependency, days on holiday and being chronically ill as a parent. Holiday and emotional support mediated the effect of demographic and disease-related factors on HRQoL. Hours of employment, leisure time and household income did not mediate between background characteristics and HRQoL, contrasting the hypotheses.

Risk factors and mediating pathways of loneliness and social support in community-dwelling older adults.

PubMed

Schnittger, Rebecca I B; Wherton, Joseph; Prendergast, David; Lawlor, Brian A

2012-01-01

To develop biopsychosocial models of loneliness and social support thereby identifying their key risk factors in an Irish sample of community-dwelling older adults. Additionally, to investigate indirect effects of social support on loneliness through mediating risk factors. A total of 579 participants (400 females; 179 males) were given a battery of biopsychosocial assessments with the primary measures being the De Jong Gierveld Loneliness Scale and the Lubben Social Network Scale along with a broad range of secondary measures. Bivariate correlation analyses identified items to be included in separate psychosocial, cognitive, biological and demographic multiple regression analyses. The resulting model items were then entered into further multiple regression analyses to obtain overall models. Following this, bootstrapping mediation analyses was conducted to examine indirect effects of social support on the subtypes (emotional and social) of loneliness. The overall model for (1) emotional loneliness included depression, neuroticism, perceived stress, living alone and accommodation type, (2) social loneliness included neuroticism, perceived stress, animal naming and number of grandchildren and (3) social support included extraversion, executive functioning (Trail Making Test B-time), history of falls, age and whether the participant drives or not. Social support influenced emotional loneliness predominantly through indirect means, while its effect on social loneliness was more direct. These results characterise the biopsychosocial risk factors of emotional loneliness, social loneliness and social support and identify key pathways by which social support influences emotional and social loneliness. These findings highlight issues with the potential for consideration in the development of targeted interventions.

NREL Software Aids Offshore Wind Turbine Designs (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2013-10-01

NREL researchers are supporting offshore wind power development with computer models that allow detailed analyses of both fixed and floating offshore wind turbines. While existing computer-aided engineering (CAE) models can simulate the conditions and stresses that a land-based wind turbine experiences over its lifetime, offshore turbines require the additional considerations of variations in water depth, soil type, and wind and wave severity, which also necessitate the use of a variety of support-structure types. NREL's core wind CAE tool, FAST, models the additional effects of incident waves, sea currents, and the foundation dynamics of the support structures.

Update on ORNL TRANSFORM Tool: Simulating Multi-Module Advanced Reactor with End-to-End I&C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Richard Edward; Fugate, David L.; Cetiner, Sacit M.

2015-05-01

The Small Modular Reactor (SMR) Dynamic System Modeling Tool project is in the fourth year of development. The project is designed to support collaborative modeling and study of various advanced SMR (non-light water cooled reactor) concepts, including the use of multiple coupled reactors at a single site. The focus of this report is the development of a steam generator and drum system model that includes the complex dynamics of typical steam drum systems, the development of instrumentation and controls for the steam generator with drum system model, and the development of multi-reactor module models that reflect the full power reactormore » innovative small module design concept. The objective of the project is to provide a common simulation environment and baseline modeling resources to facilitate rapid development of dynamic advanced reactor models; ensure consistency among research products within the Instrumentation, Controls, and Human-Machine Interface technical area; and leverage cross-cutting capabilities while minimizing duplication of effort. The combined simulation environment and suite of models are identified as the TRANSFORM tool. The critical elements of this effort include (1) defining a standardized, common simulation environment that can be applied throughout the Advanced Reactors Technology program; (2) developing a library of baseline component modules that can be assembled into full plant models using available geometry, design, and thermal-hydraulic data; (3) defining modeling conventions for interconnecting component models; and (4) establishing user interfaces and support tools to facilitate simulation development (i.e., configuration and parameterization), execution, and results display and capture.« less

Computer support for physiological cell modelling using an ontology on cell physiology.

PubMed

Takao, Shimayoshi; Kazuhiro, Komurasaki; Akira, Amano; Takeshi, Iwashita; Masanori, Kanazawa; Tetsuya, Matsuda

2006-01-01

The development of electrophysiological whole cell models to support the understanding of biological mechanisms is increasing rapidly. Due to the complexity of biological systems, comprehensive cell models, which are composed of many imported sub-models of functional elements, can get quite complicated as well, making computer modification difficult. Here, we propose a computer support to enhance structural changes of cell models, employing the markup languages CellML and our original PMSML (physiological model structure markup language), in addition to a new ontology for cell physiological modelling. In particular, a method to make references from CellML files to the ontology and a method to assist manipulation of model structures using markup languages together with the ontology are reported. Using these methods three software utilities, including a graphical model editor, are implemented. Experimental results proved that these methods are effective for the modification of electrophysiological models.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

A toolbox and record for scientific models

NASA Technical Reports Server (NTRS)

Ellman, Thomas

1994-01-01

Computational science presents a host of challenges for the field of knowledge-based software design. Scientific computation models are difficult to construct. Models constructed by one scientist are easily misapplied by other scientists to problems for which they are not well-suited. Finally, models constructed by one scientist are difficult for others to modify or extend to handle new types of problems. Construction of scientific models actually involves much more than the mechanics of building a single computational model. In the course of developing a model, a scientist will often test a candidate model against experimental data or against a priori expectations. Test results often lead to revisions of the model and a consequent need for additional testing. During a single model development session, a scientist typically examines a whole series of alternative models, each using different simplifying assumptions or modeling techniques. A useful scientific software design tool must support these aspects of the model development process as well. In particular, it should propose and carry out tests of candidate models. It should analyze test results and identify models and parts of models that must be changed. It should determine what types of changes can potentially cure a given negative test result. It should organize candidate models, test data, and test results into a coherent record of the development process. Finally, it should exploit the development record for two purposes: (1) automatically determining the applicability of a scientific model to a given problem; (2) supporting revision of a scientific model to handle a new type of problem. Existing knowledge-based software design tools must be extended in order to provide these facilities.

Understanding Adolescent Parenting: The Dimensions and Functions of Social Support.

ERIC Educational Resources Information Center

Nath, Pamela S.; And Others

1991-01-01

Presents model of adolescent parenting, emphasizing multiple influences that social support has on maternal personality, health and nutritional status, cognitive readiness for parenting, and actual parenting behavior and child development. Concludes life span perspective is useful in evaluating teenage mother's social support needs and individual…

Designing for sustained adoption: A model of developing educational innovations for successful propagation

NASA Astrophysics Data System (ADS)

Khatri, Raina; Henderson, Charles; Cole, Renée; Froyd, Jeffrey E.; Friedrichsen, Debra; Stanford, Courtney

2016-06-01

[This paper is part of the Focused Collection on Preparing and Supporting University Physics Educators.] The physics education research community has produced a wealth of knowledge about effective teaching and learning of college level physics. Based on this knowledge, many research-proven instructional strategies and teaching materials have been developed and are currently available to instructors. Unfortunately, these intensive research and development activities have failed to influence the teaching practices of many physics instructors. This paper describes interim results of a larger study to develop a model of designing materials for successful propagation. The larger study includes three phases, the first two of which are reported here. The goal of the first phase was to characterize typical propagation practices of education developers, using data from a survey of 1284 National Science Foundation (NSF) principal investigators and focus group data from eight disciplinary groups of NSF program directors. The goal of the second phase was to develop an understanding of successful practice by studying three instructional strategies that have been well propagated. The result of the first two phases is a tentative model of designing for successful propagation, which will be further validated in the third phase through purposeful sampling of additional well-propagated instructional strategies along with typical education development projects. We found that interaction with potential adopters was one of the key missing ingredients in typical education development activities. Education developers often develop a polished product before getting feedback, rely on mass-market communication channels for dissemination, and do not plan for supporting adopters during implementation. The tentative model resulting from this study identifies three key propagation activities: interactive development, interactive dissemination, and support of adopters. Interactive development uses significant feedback from potential adopters to develop a strong product suitable for use in many settings. Interactive dissemination uses personal interactions to reach and motivate potential users. Support of adopters is missing from typical propagation practice and is important to reduce the burden of implementation and increases the likelihood of successful adoption.

A numerical cloud model for the support of laboratory experimentation

NASA Technical Reports Server (NTRS)

Hagen, D. E.

1979-01-01

A numerical cloud model is presented which can describe the evolution of a cloud starting from moist aerosol-laden air through the diffusional growth regime. The model is designed for the direct support of cloud chamber laboratory experimentation, i.e., experiment preparation, real-time control and data analysis. In the model the thermodynamics is uncoupled from the droplet growth processes. Analytic solutions for the cloud droplet growth equations are developed which can be applied in most laboratory situations. The model is applied to a variety of representative experiments.

Artificial intelligence techniques for modeling database user behavior

NASA Technical Reports Server (NTRS)

Tanner, Steve; Graves, Sara J.

1990-01-01

The design and development of the adaptive modeling system is described. This system models how a user accesses a relational database management system in order to improve its performance by discovering use access patterns. In the current system, these patterns are used to improve the user interface and may be used to speed data retrieval, support query optimization and support a more flexible data representation. The system models both syntactic and semantic information about the user's access and employs both procedural and rule-based logic to manipulate the model.

DEVELOPMENT OF A PORTABLE SOFTWARE LANGUAGE FOR PHYSIOLOGICALLY-BASED PHARMACOKINETIC (PBPK) MODELS

EPA Science Inventory

The PBPK modeling community has had a long-standing problem with modeling software compatibility. The numerous software packages used for PBPK models are, at best, minimally compatible. This creates problems ranging from model obsolescence due to software support discontinuation...

VISUAL PLUMES MIXING ZONE MODELING SOFTWARE

EPA Science Inventory

The U.S. Environmental Protection Agency has a long history of both supporting plume model development and providing mixing zone modeling software. The Visual Plumes model is the most recent addition to the suite of public-domain models available through the EPA-Athens Center f...

International Jobs and Economic Development Impacts (I-JEDI) Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

International Jobs and Economic Development Impacts (I-JEDI) is a freely available economic model that estimates gross economic impacts from wind, solar, biomass, and geothermal energy projects. Building on a similar model for the United States, I-JEDI was developed by the National Renewable Energy Laboratory under the U.S. government's Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support partner countries in assessing economic impacts of LEDS actions in the energy sector.

Development of a Systems Engineering Competency Model Tool for the Aviation and Missile Research, Development, And Engineering Center (AMRDEC)

DTIC Science & Technology

2017-06-01

The Naval Postgraduate School has developed a competency model for the systems engineering profession and is implementing a tool to support high...stakes human resource functions for the U.S. Army. A systems engineering career competency model (SECCM), recently developed by the Navy and verified by...the Office of Personnel Management (OPM), defines the critical competencies for successful performance as a systems engineer at each general schedule

Recovery from schizophrenia and the recovery model.

PubMed

Warner, Richard

2009-07-01

The recovery model refers to subjective experiences of optimism, empowerment and interpersonal support, and to a focus on collaborative treatment approaches, finding productive roles for user/consumers, peer support and reducing stigma. The model is influencing service development around the world. This review will assess whether optimism about outcome from serious mental illness and other tenets of the recovery model are borne out by recent research. Remission of symptoms has been precisely defined, but the definition of 'recovery' is a more diffuse concept that includes such factors as being productive and functioning independently. Recent research and a large, earlier body of data suggest that optimism about outcome from schizophrenia is justified. A substantial proportion of people with the illness will recover completely and many more will regain good social functioning. Outcome is better for people in the developing world. Mortality for people with schizophrenia is increasing but is lower in the developing world. Working appears to help people recover from schizophrenia, and recent advances in vocational rehabilitation have been shown to be effective in countries with differing economies and labor markets. A growing body of research supports the concept that empowerment is an important component of the recovery process. Key tenets of the recovery model - optimism about recovery from schizophrenia, the importance of access to employment and the value of empowerment of user/consumers in the recovery process - are supported by the scientific research. Attempts to reduce the internalized stigma of mental illness should enhance the recovery process.

Bioinformatics for transporter pharmacogenomics and systems biology: data integration and modeling with UML.

PubMed

Yan, Qing

2010-01-01

Bioinformatics is the rational study at an abstract level that can influence the way we understand biomedical facts and the way we apply the biomedical knowledge. Bioinformatics is facing challenges in helping with finding the relationships between genetic structures and functions, analyzing genotype-phenotype associations, and understanding gene-environment interactions at the systems level. One of the most important issues in bioinformatics is data integration. The data integration methods introduced here can be used to organize and integrate both public and in-house data. With the volume of data and the high complexity, computational decision support is essential for integrative transporter studies in pharmacogenomics, nutrigenomics, epigenetics, and systems biology. For the development of such a decision support system, object-oriented (OO) models can be constructed using the Unified Modeling Language (UML). A methodology is developed to build biomedical models at different system levels and construct corresponding UML diagrams, including use case diagrams, class diagrams, and sequence diagrams. By OO modeling using UML, the problems of transporter pharmacogenomics and systems biology can be approached from different angles with a more complete view, which may greatly enhance the efforts in effective drug discovery and development. Bioinformatics resources of membrane transporters and general bioinformatics databases and tools that are frequently used in transporter studies are also collected here. An informatics decision support system based on the models presented here is available at http://www.pharmtao.com/transporter . The methodology developed here can also be used for other biomedical fields.

Software for pest-management science: computer models and databases from the United States Department of Agriculture-Agricultural Research Service.

PubMed

Wauchope, R Don; Ahuja, Lajpat R; Arnold, Jeffrey G; Bingner, Ron; Lowrance, Richard; van Genuchten, Martinus T; Adams, Larry D

2003-01-01

We present an overview of USDA Agricultural Research Service (ARS) computer models and databases related to pest-management science, emphasizing current developments in environmental risk assessment and management simulation models. The ARS has a unique national interdisciplinary team of researchers in surface and sub-surface hydrology, soil and plant science, systems analysis and pesticide science, who have networked to develop empirical and mechanistic computer models describing the behavior of pests, pest responses to controls and the environmental impact of pest-control methods. Historically, much of this work has been in support of production agriculture and in support of the conservation programs of our 'action agency' sister, the Natural Resources Conservation Service (formerly the Soil Conservation Service). Because we are a public agency, our software/database products are generally offered without cost, unless they are developed in cooperation with a private-sector cooperator. Because ARS is a basic and applied research organization, with development of new science as our highest priority, these products tend to be offered on an 'as-is' basis with limited user support except for cooperating R&D relationship with other scientists. However, rapid changes in the technology for information analysis and communication continually challenge our way of doing business.

The Five Cs of Positive Youth Development in Norway: Assessment and Associations with Positive and Negative Outcomes

ERIC Educational Resources Information Center

Holsen, Ingrid; Geldhof, John; Larsen, Torill; Aardal, Elisabeth

2017-01-01

As the field of positive youth development (PYD) emerges internationally, models of PYD designed for use in the US must be extended to diverse contexts. For instance, a robust body of evidence supports Lerner and colleagues' Five Cs Model of PYD in the US, but it remains unclear whether the Five Cs Model can validly capture positive development in…

How adverse outcome pathways can aid the development and ...

EPA Pesticide Factsheets

Efforts are underway to transform regulatory toxicology and chemical safety assessment from a largely empirical science based on direct observation of apical toxicity outcomes in whole organism toxicity tests to a predictive one in which outcomes and risk are inferred from accumulated mechanistic understanding. The adverse outcome pathway (AOP) framework has emerged as a systematic approach for organizing knowledge that supports such inference. We argue that this systematic organization of knowledge can inform and help direct the design and development of computational prediction models that can further enhance the utility of mechanistic and in silico data for chemical safety assessment. Examples of AOP-informed model development and its application to the assessment of chemicals for skin sensitization and multiple modes of endocrine disruption are provided. The role of problem formulation, not only as a critical phase of risk assessment, but also as guide for both AOP and complementary model development described. Finally, a proposal for actively engaging the modeling community in AOP-informed computational model development is made. The contents serve as a vision for how AOPs can be leveraged to facilitate development of computational prediction models needed to support the next generation of chemical safety assessment. The present manuscript reports on expert opinion and case studies that came out of a European Commission, Joint Research Centre-sponsored work

Detailed Modeling of Distillation Technologies for Closed-Loop Water Recovery Systems

NASA Technical Reports Server (NTRS)

Allada, Rama Kumar; Lange, Kevin E.; Anderson, Molly S.

2011-01-01

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA?s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents efforts to develop chemical process simulations for three technologies: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system and the Wiped-Film Rotating Disk (WFRD) using the Aspen Custom Modeler and Aspen Plus process simulation tools. The paper discusses system design, modeling details, and modeling results for each technology and presents some comparisons between the model results and recent test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Virtual Engineering and Science Team - Reusable Autonomy for Spacecraft Subsystems

NASA Technical Reports Server (NTRS)

Bailin, Sidney C.; Johnson, Michael A.; Rilee, Michael L.; Truszkowski, Walt; Thompson, Bryan; Day, John H. (Technical Monitor)

2002-01-01

In this paper we address the design, development, and evaluation of the Virtual Engineering and Science Team (VEST) tool - a revolutionary way to achieve onboard subsystem/instrument autonomy. VEST directly addresses the technology needed for advanced autonomy enablers for spacecraft subsystems. It will significantly support the efficient and cost effective realization of on-board autonomy and contribute directly to realizing the concept of an intelligent autonomous spacecraft. VEST will support the evolution of a subsystem/instrument model that is probably correct and from that model the automatic generation of the code needed to support the autonomous operation of what was modeled. VEST will directly support the integration of the efforts of engineers, scientists, and software technologists. This integration of efforts will be a significant advancement over the way things are currently accomplished. The model, developed through the use of VEST, will be the basis for the physical construction of the subsystem/instrument and the generated code will support its autonomous operation once in space. The close coupling between the model and the code, in the same tool environment, will help ensure that correct and reliable operational control of the subsystem/instrument is achieved.VEST will provide a thoroughly modern interface that will allow users to easily and intuitively input subsystem/instrument requirements and visually get back the system's reaction to the correctness and compatibility of the inputs as the model evolves. User interface/interaction, logic, theorem proving, rule-based and model-based reasoning, and automatic code generation are some of the basic technologies that will be brought into play in realizing VEST.

Optimizing and controlling earthmoving operations using spatial technologies

NASA Astrophysics Data System (ADS)

Alshibani, Adel

This thesis presents a model designed for optimizing, tracking, and controlling earthmoving operations. The proposed model utilizes, Genetic Algorithm (GA), Linear Programming (LP), and spatial technologies including Global Positioning Systems (GPS) and Geographic Information Systems (GIS) to support the management functions of the developed model. The model assists engineers and contractors in selecting near optimum crew formations in planning phase and during construction, using GA and LP supported by the Pathfinder Algorithm developed in a GIS environment. GA is used in conjunction with a set of rules developed to accelerate the optimization process and to avoid generating and evaluating hypothetical and unrealistic crew formations. LP is used to determine quantities of earth to be moved from different borrow pits and to be placed at different landfill sites to meet project constraints and to minimize the cost of these earthmoving operations. On the one hand, GPS is used for onsite data collection and for tracking construction equipment in near real-time. On the other hand, GIS is employed to automate data acquisition and to analyze the collected spatial data. The model is also capable of reconfiguring crew formations dynamically during the construction phase while site operations are in progress. The optimization of the crew formation considers: (1) construction time, (2) construction direct cost, or (3) construction total cost. The model is also capable of generating crew formations to meet, as close as possible, specified time and/or cost constraints. In addition, the model supports tracking and reporting of project progress utilizing the earned-value concept and the project ratio method with modifications that allow for more accurate forecasting of project time and cost at set future dates and at completion. The model is capable of generating graphical and tabular reports. The developed model has been implemented in prototype software, using Object-Oriented Programming, Microsoft Foundation Classes (MFC), and has been coded using visual C++ V.6. Microsoft Access is employed as database management system. The developed software operates in Microsoft windows' environment. Three example applications were analyzed to validate the development made and to illustrate the essential features of the developed model.

Identifying a Transition Competency Domain Structure: Assisting Transition Planning Teams to Understand Roles and Responsibilities of Community Partners

ERIC Educational Resources Information Center

Plotner, Anthony; Trach, John; Shogren, Karrie

2012-01-01

The special education and rehabilitation literature is replete with articles examining transition planning, services and supports; however, transition models have typically been developed for the school context and not focused on other transition team members. These school-based models are important; however, models developed from the perspectives…

Social Context, Self-Perceptions and Student Engagement: A SEM Investigation of the Self-System Model of Motivational Development (SSMMD)

ERIC Educational Resources Information Center

Dupont, Serge; Galand, Benoit; Nils, Frédéric; Hospel, Virginie

2014-01-01

Introduction: The present study aimed to test a theoretically-based model (the self-system model of motivational development) including at the same time the extent to which the social context provides structure, warmth and autonomy support, the students' perceived autonomy, relatedness and competence, and behavioral, cognitive and emotional…

Dynamic Modeling for Development and Education: From Concepts to Numbers

ERIC Educational Resources Information Center

Van Geert, Paul

2014-01-01

The general aim of the article is to teach the reader how to transform conceptual models of change, development, and learning into mathematical expressions and how to use these equations to build dynamic models by means of the widely used spreadsheet program Excel. The explanation is supported by a number of Excel files, which the reader can…

An Exploratory Study of the Elements to Develop a Coaching Model

ERIC Educational Resources Information Center

Brown, Gwendolyn

2010-01-01

This exploratory study examined the elements of a coaching model based on the best practices that first focus on providing managers with the ability to develop workers and increase productivity, before using existing models that only support the process of managing workers, when it becomes apparent that the worker is not meeting expected…

Integrating Engineering Data Systems for NASA Spaceflight Projects

NASA Technical Reports Server (NTRS)

Carvalho, Robert E.; Tollinger, Irene; Bell, David G.; Berrios, Daniel C.

2012-01-01

NASA has a large range of custom-built and commercial data systems to support spaceflight programs. Some of the systems are re-used by many programs and projects over time. Management and systems engineering processes require integration of data across many of these systems, a difficult problem given the widely diverse nature of system interfaces and data models. This paper describes an ongoing project to use a central data model with a web services architecture to support the integration and access of linked data across engineering functions for multiple NASA programs. The work involves the implementation of a web service-based middleware system called Data Aggregator to bring together data from a variety of systems to support space exploration. Data Aggregator includes a central data model registry for storing and managing links between the data in disparate systems. Initially developed for NASA's Constellation Program needs, Data Aggregator is currently being repurposed to support the International Space Station Program and new NASA projects with processes that involve significant aggregating and linking of data. This change in user needs led to development of a more streamlined data model registry for Data Aggregator in order to simplify adding new project application data as well as standardization of the Data Aggregator query syntax to facilitate cross-application querying by client applications. This paper documents the approach from a set of stand-alone engineering systems from which data are manually retrieved and integrated, to a web of engineering data systems from which the latest data are automatically retrieved and more quickly and accurately integrated. This paper includes the lessons learned through these efforts, including the design and development of a service-oriented architecture and the evolution of the data model registry approaches as the effort continues to evolve and adapt to support multiple NASA programs and priorities.

A Multi-Compartment 3-D Finite Element Model of Rectocele and Its Interaction with Cystocele

PubMed Central

Luo, Jiajia; Chen, Luyun; Fenner, Dee E.; Ashton-Miller, James A.; DeLancey, John O. L.

2015-01-01

We developed a subject-specific 3-D finite element model to understand the mechanics underlying formation of female pelvic organ prolapse, specifically a rectocele and its interaction with a cystocele. The model was created from MRI 3-D geometry of a healthy 45 year-old multiparous woman. It included anterior and posterior vaginal walls, levator ani muscle, cardinal and uterosacral ligaments, anterior and posterior arcus tendineus fascia pelvis, arcus tendineus levator ani, perineal body, perineal membrane and anal sphincter. Material properties were mostly from the literature. Tissue impairment was modeled as decreased tissue stiffness based on previous clinical studies. Model equations were solved using Abaqus v 6.11. The sensitivity of anterior and posterior vaginal wall geometry was calculated for different combinations tissue impairments under increasing intraabdominal pressure. Prolapse size was reported as POP-Q point at point Bp for rectocele and point Ba for cystocele. Results show that a rectocele resulted from impairments of the levator ani and posterior compartment support. For 20% levator and 85% posterior support impairments, simulated rectocele size (at POP-Q point: Bp) increased 0.29 mm/cm H2O without apical impairment and 0.36 mm/cm H2O with 60% apical impairment, as intraabdominal pressures increased from 0 to 150 cm H2O. Apical support impairment could result in the development of either a cystocele or rectocele. Simulated repair of posterior compartment support decreased rectocele but increased a preexisting cystocele. We conclude that development of rectocele and cystocele depend on the presence of anterior, posterior, levator and/or or apical support impairments, as well as the interaction of the prolapse with the opposing compartment. PMID:25757664

Development of a Mechanistically Based, Basin-Scale Stream Temperature Model: Applications to Cumulative Effects Modeling

Treesearch

Douglas Allen; William Dietrich; Peter Baker; Frank Ligon; Bruce Orr

2007-01-01

We describe a mechanistically-based stream model, BasinTemp, which assumes that direct shortwave radiation moderated by riparian and topographic shading, controls stream temperatures during the hottest part of the year. The model was developed to support a temperature TMDL for the South Fork Eel basin in Northern California and couples a GIS and a 1-D energy balance...

Summary of Current and Future MSFC International Space Station Environmental Control and Life Support System Activities

NASA Technical Reports Server (NTRS)

Ray, Charles D.; Carrasquillo, Robyn L.; Minton-Summers, Silvia

1997-01-01

This paper provides a summary of current work accomplished under technical task agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the Environmental Control and Life Support System (ECLSS) as well as future planning activities in support of the International Space Station (ISS). Current activities include ECLSS computer model development, component design and development, subsystem integrated system testing, life testing, and government furnished equipment delivered to the ISS program. A long range plan for the MSFC ECLSS test facility is described whereby the current facility would be upgraded to support integrated station ECLSS operations. ECLSS technology development efforts proposed to be performed under the Advanced Engineering Technology Development (AETD) program are also discussed.

Enhancement of the Acquisition Process for a Combat System-A Case Study to Model the Workflow Processes for an Air Defense System Acquisition

DTIC Science & Technology

2009-12-01

Business Process Modeling BPMN Business Process Modeling Notation SoA Service-oriented Architecture UML Unified Modeling Language CSP...system developers. Supporting technologies include Business Process Modeling Notation ( BPMN ), Unified Modeling Language (UML), model-driven architecture

Autonomous Learner Model Resource Book

ERIC Educational Resources Information Center

Betts, George T.; Carey, Robin J.; Kapushion, Blanche M.

2016-01-01

"Autonomous Learner Model Resource Book" includes activities and strategies to support the development of autonomous learners. More than 40 activities are included, all geared to the emotional, social, cognitive, and physical development of students. Teachers may use these activities and strategies with the entire class, small groups, or…

Contributions of Participatory Modeling to Development and Support of Coastal and Marine Management Plans

EPA Science Inventory

The role of participatory modeling- at various scales- to assist in developing shared visions, understanding the decision landscape, identifying and selecting management options, and monitoring outcomes will be explored in the context of coastal and marine planning, ecosystem ser...

Developing a Modeling Framework for Ecosystem Forecasting: The Lake Michigan Pilot

EPA Science Inventory

Recent multi-party efforts to coordinate modeling activities that support ecosystem management decision-making in the Great Lakes have resulted in the recommendation to convene an interagency working group that will develop a pilot approach for Lake Michigan. The process will br...

Soft computing techniques toward modeling the water supplies of Cyprus.

PubMed

Iliadis, L; Maris, F; Tachos, S

2011-10-01

This research effort aims in the application of soft computing techniques toward water resources management. More specifically, the target is the development of reliable soft computing models capable of estimating the water supply for the case of "Germasogeia" mountainous watersheds in Cyprus. Initially, ε-Regression Support Vector Machines (ε-RSVM) and fuzzy weighted ε-RSVMR models have been developed that accept five input parameters. At the same time, reliable artificial neural networks have been developed to perform the same job. The 5-fold cross validation approach has been employed in order to eliminate bad local behaviors and to produce a more representative training data set. Thus, the fuzzy weighted Support Vector Regression (SVR) combined with the fuzzy partition has been employed in an effort to enhance the quality of the results. Several rational and reliable models have been produced that can enhance the efficiency of water policy designers. Copyright © 2011 Elsevier Ltd. All rights reserved.

A Selection of Composites Simulation Practices at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Ratcliffe, James G.

2007-01-01

One of the major areas of study at NASA Langley Research Center is the development of technologies that support the use of advanced composite materials in aerospace applications. Amongst the supporting technologies are analysis tools used to simulate the behavior of these materials. This presentation will discuss a number of examples of analysis tools and simulation practices conducted at NASA Langley. The presentation will include examples of damage tolerance analyses for both interlaminar and intralaminar failure modes. Tools for modeling interlaminar failure modes include fracture mechanics and cohesive methods, whilst tools for modeling intralaminar failure involve the development of various progressive failure analyses. Other examples of analyses developed at NASA Langley include a thermo-mechanical model of an orthotropic material and the simulation of delamination growth in z-pin reinforced laminates.

Incorporating GIS data into an agent-based model to support planning policy making for the development of creative industries

NASA Astrophysics Data System (ADS)

Liu, Helin; Silva, Elisabete A.; Wang, Qian

2016-07-01

This paper presents an extension to the agent-based model "Creative Industries Development-Urban Spatial Structure Transformation" by incorporating GIS data. Three agent classes, creative firms, creative workers and urban government, are considered in the model, and the spatial environment represents a set of GIS data layers (i.e. road network, key housing areas, land use). With the goal to facilitate urban policy makers to draw up policies locally and optimise the land use assignment in order to support the development of creative industries, the improved model exhibited its capacity to assist the policy makers conducting experiments and simulating different policy scenarios to see the corresponding dynamics of the spatial distributions of creative firms and creative workers across time within a city/district. The spatiotemporal graphs and maps record the simulation results and can be used as a reference by the policy makers to adjust land use plans adaptively at different stages of the creative industries' development process.

Enabling complex queries to drug information sources through functional composition.

PubMed

Peters, Lee; Mortensen, Jonathan; Nguyen, Thang; Bodenreider, Olivier

2013-01-01

Our objective was to enable an end-user to create complex queries to drug information sources through functional composition, by creating sequences of functions from application program interfaces (API) to drug terminologies. The development of a functional composition model seeks to link functions from two distinct APIs. An ontology was developed using Protégé to model the functions of the RxNorm and NDF-RT APIs by describing the semantics of their input and output. A set of rules were developed to define the interoperable conditions for functional composition. The operational definition of interoperability between function pairs is established by executing the rules on the ontology. We illustrate that the functional composition model supports common use cases, including checking interactions for RxNorm drugs and deploying allergy lists defined in reference to drug properties in NDF-RT. This model supports the RxMix application (http://mor.nlm.nih.gov/RxMix/), an application we developed for enabling complex queries to the RxNorm and NDF-RT APIs.

Development and function of human innate immune cells in a humanized mouse model.

PubMed

Rongvaux, Anthony; Willinger, Tim; Martinek, Jan; Strowig, Till; Gearty, Sofia V; Teichmann, Lino L; Saito, Yasuyuki; Marches, Florentina; Halene, Stephanie; Palucka, A Karolina; Manz, Markus G; Flavell, Richard A

2014-04-01

Mice repopulated with human hematopoietic cells are a powerful tool for the study of human hematopoiesis and immune function in vivo. However, existing humanized mouse models cannot support development of human innate immune cells, including myeloid cells and natural killer (NK) cells. Here we describe two mouse strains called MITRG and MISTRG, in which human versions of four genes encoding cytokines important for innate immune cell development are knocked into their respective mouse loci. The human cytokines support the development and function of monocytes, macrophages and NK cells derived from human fetal liver or adult CD34(+) progenitor cells injected into the mice. Human macrophages infiltrated a human tumor xenograft in MITRG and MISTRG mice in a manner resembling that observed in tumors obtained from human patients. This humanized mouse model may be used to model the human immune system in scenarios of health and pathology, and may enable evaluation of therapeutic candidates in an in vivo setting relevant to human physiology.

Development and function of human innate immune cells in a humanized mouse model

PubMed Central

Rongvaux, Anthony; Willinger, Tim; Martinek, Jan; Strowig, Till; Gearty, Sofia V.; Teichmann, Lino L.; Saito, Yasuyuki; Marches, Florentina; Halene, Stephanie; Palucka, A. Karolina; Manz, Markus G.; Flavell, Richard A.

2014-01-01

Mice repopulated with human hematopoietic cells are a powerful tool for the study of human hematopoiesis and immune function in vivo. However, existing humanized mouse models are unable to support development of human innate immune cells, including myeloid cells and NK cells. Here we describe a mouse strain, called MI(S)TRG, in which human versions of four genes encoding cytokines important for innate immune cell development are knocked in to their respective mouse loci. The human cytokines support the development and function of monocytes/macrophages and natural killer cells derived from human fetal liver or adult CD34+ progenitor cells injected into the mice. Human macrophages infiltrated a human tumor xenograft in MI(S)TRG mice in a manner resembling that observed in tumors obtained from human patients. This humanized mouse model may be used to model the human immune system in scenarios of health and pathology, and may enable evaluation of therapeutic candidates in an in vivo setting relevant to human physiology. PMID:24633240

BioModels: expanding horizons to include more modelling approaches and formats

PubMed Central

Nguyen, Tung V N; Graesslin, Martin; Hälke, Robert; Ali, Raza; Schramm, Jochen; Wimalaratne, Sarala M; Kothamachu, Varun B; Rodriguez, Nicolas; Swat, Maciej J; Eils, Jurgen; Eils, Roland; Laibe, Camille; Chelliah, Vijayalakshmi

2018-01-01

Abstract BioModels serves as a central repository of mathematical models representing biological processes. It offers a platform to make mathematical models easily shareable across the systems modelling community, thereby supporting model reuse. To facilitate hosting a broader range of model formats derived from diverse modelling approaches and tools, a new infrastructure for BioModels has been developed that is available at http://www.ebi.ac.uk/biomodels. This new system allows submitting and sharing of a wide range of models with improved support for formats other than SBML. It also offers a version-control backed environment in which authors and curators can work collaboratively to curate models. This article summarises the features available in the current system and discusses the potential benefit they offer to the users over the previous system. In summary, the new portal broadens the scope of models accepted in BioModels and supports collaborative model curation which is crucial for model reproducibility and sharing. PMID:29106614

Using GOMS and Bayesian plan recognition to develop recognition models of operator behavior

NASA Astrophysics Data System (ADS)

Zaientz, Jack D.; DeKoven, Elyon; Piegdon, Nicholas; Wood, Scott D.; Huber, Marcus J.

2006-05-01

Trends in combat technology research point to an increasing role for uninhabited vehicles in modern warfare tactics. To support increased span of control over these vehicles human responsibilities need to be transformed from tedious, error-prone and cognition intensive operations into tasks that are more supervisory and manageable, even under intensely stressful conditions. The goal is to move away from only supporting human command of low-level system functions to intention-level human-system dialogue about the operator's tasks and situation. A critical element of this process is developing the means to identify when human operators need automated assistance and to identify what assistance they need. Toward this goal, we are developing an unmanned vehicle operator task recognition system that combines work in human behavior modeling and Bayesian plan recognition. Traditionally, human behavior models have been considered generative, meaning they describe all possible valid behaviors. Basing behavior recognition on models designed for behavior generation can offers advantages in improved model fidelity and reuse. It is not clear, however, how to reconcile the structural differences between behavior recognition and behavior modeling approaches. Our current work demonstrates that by pairing a cognitive psychology derived human behavior modeling approach, GOMS, with a Bayesian plan recognition engine, ASPRN, we can translate a behavior generation model into a recognition model. We will discuss the implications for using human performance models in this manner as well as suggest how this kind of modeling may be used to support the real-time control of multiple, uninhabited battlefield vehicles and other semi-autonomous systems.

Mass balances for a biological life support system simulation model

NASA Technical Reports Server (NTRS)

Volk, Tyler; Rumel, John D.

1987-01-01

Design decisions to aid the development of future space-based biological life support systems (BLSS) can be made with simulation models. Here the biochemical stoichiometry is developed for: (1) protein, carbohydrate, fat, fiber, and lignin production in the edible and inedible parts of plants; (2) food consumption and production of organic solids in urine, feces, and wash water by the humans; and (3) operation of the waste processor. Flux values for all components are derived for a steady-state system with wheat as the sole food source.

Research, Development, Training, and Evaluation (RDTE) Support Delivery Order 1: Computational Cognitive Models

DTIC Science & Technology

1993-09-01

AL/HR-TR- 1993-0072 AD-A271 837 RESEARCH, DEVELOPMENT, TRAINING, AND A EVALUATION (RDTE) SUPPORT R DELIVERY ORDER 1 : COMPUTATIONAL COGNITIVE M MODELS...Stephen E. Deutsch :-"LEC"E R Eva Hudlicka eNOV04 1 0 Marilyn J. Adams0 Carl E. FeehrerN G BOLT BERANEK AND NEWMAN, INCG10 MOULTON STREET CAMBRIDGE...Washington. DC 20503 1 . AGENCY USE ONLY (Leave blank) 2 REPORT DATE 3. REPORT TYPE AND DATES COVERED Sep 1993 Final - March 1992 to April 1993 4

The NASA-JPL advanced propulsion program

NASA Technical Reports Server (NTRS)

Frisbee, Robert H.

1994-01-01

The NASA Advanced Propulsion Concepts (APC) program at the Jet Propulsion Laboratory (JPL) consists of two main areas: The first involves cooperative modeling and research activities between JPL and various universities and industry; the second involves research at universities and industry that is directly supported by JPL. The cooperative research program consists of mission studies, research and development of ion engine technology using C-60 (Buckminsterfullerene) propellant, and research and development of lithium-propellant Lorentz-force accelerator (LFA) engine technology. The university/industry- supported research includes research (modeling and proof-of-concept experiments) in advanced, long-life electric propulsion, and in fusion propulsion. These propulsion concepts were selected primarily to cover a range of applications from near-term to far-term missions. For example, the long-lived pulsed-xenon thruster research that JPL is supporting at Princeton University addresses the near-term need for efficient, long-life attitude control and station-keeping propulsion for Earth-orbiting spacecraft. The C-60-propellant ion engine has the potential for good efficiency in a relatively low specific impulse (Isp) range (10,000 - 30,000 m/s) that is optimum for relatively fast (less than 100 day) cis-lunar (LEO/GEO/Lunar) missions employing near-term, high-specific mass electric propulsion vehicles. Research and modeling on the C-60-ion engine are currently being performed by JPL (engine demonstration), Caltech (C-60 properties), MIT (plume modeling), and USC (diagnostics). The Li-propellant LFA engine also has good efficiency in the modest Isp range (40,000 - 50,000 m/s) that is optimum for near-to-mid-term megawatt-class solar- and nuclear-electric propulsion vehicles used for Mars missions transporting cargo (in support of a piloted mission). Research and modeling on the Li-LFA engine are currently being performed by JPL (cathode development), Moscow Aviation Institute (engine testing), Thermacore (electrode development), as well as at MIT (plume modeling), and USC (diagnostics). Also, the mission performance of a nuclear-electric propulsion (NEP) Li-LFA Mars cargo vehicle is being modeled by JPL (mission analysis; thruster and power processor modeling) and the Rocketdyne Energy Technology and Engineering Center (ETEC) (power system modeling). Finally, the fusion propulsion research activities that JPL is supporting at Pennsylvania State University (PSU) and at Lawrenceville Plasma Physics (LPP) are aimed at far-term fast (less than 100 day round trip) piloted Mars missions and, in the very far term, interstellar missions.

Modelling soil water retention using support vector machines with genetic algorithm optimisation.

PubMed

Lamorski, Krzysztof; Sławiński, Cezary; Moreno, Felix; Barna, Gyöngyi; Skierucha, Wojciech; Arrue, José L

2014-01-01

This work presents point pedotransfer function (PTF) models of the soil water retention curve. The developed models allowed for estimation of the soil water content for the specified soil water potentials: -0.98, -3.10, -9.81, -31.02, -491.66, and -1554.78 kPa, based on the following soil characteristics: soil granulometric composition, total porosity, and bulk density. Support Vector Machines (SVM) methodology was used for model development. A new methodology for elaboration of retention function models is proposed. Alternative to previous attempts known from literature, the ν-SVM method was used for model development and the results were compared with the formerly used the C-SVM method. For the purpose of models' parameters search, genetic algorithms were used as an optimisation framework. A new form of the aim function used for models parameters search is proposed which allowed for development of models with better prediction capabilities. This new aim function avoids overestimation of models which is typically encountered when root mean squared error is used as an aim function. Elaborated models showed good agreement with measured soil water retention data. Achieved coefficients of determination values were in the range 0.67-0.92. Studies demonstrated usability of ν-SVM methodology together with genetic algorithm optimisation for retention modelling which gave better performing models than other tested approaches.

Cognitive Attachment Model of Voices: Evidence Base and Future Implications

PubMed Central

Berry, Katherine; Varese, Filippo; Bucci, Sandra

2017-01-01

There is a robust association between hearing voices and exposure to traumatic events. Identifying mediating mechanisms for this relationship is key to theories of voice hearing and the development of therapies for distressing voices. This paper outlines the Cognitive Attachment model of Voices (CAV), a theoretical model to understand the relationship between earlier interpersonal trauma and distressing voice hearing. The model builds on attachment theory and well-established cognitive models of voices and argues that attachment and dissociative processes are key psychological mechanisms that explain how trauma influences voice hearing. Following the presentation of the model, the paper will review the current state of evidence regarding the proposed mechanisms of vulnerability to voice hearing and maintenance of voice-related distress. This review will include evidence from studies supporting associations between dissociation and voices, followed by details of our own research supporting the role of dissociation in mediating the relationship between trauma and voices and evidence supporting the role of adult attachment in influencing beliefs and relationships that voice hearers can develop with voices. The paper concludes by outlining the key questions that future research needs to address to fully test the model and the clinical implications that arise from the work. PMID:28713292

Final Technical Report for GO17004 Regulatory Logic: Codes and Standards for the Hydrogen Economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakarado, Gary L.

The objectives of this project are to: develop a robust supporting research and development program to provide critical hydrogen behavior data and a detailed understanding of hydrogen combustion and safety across a range of scenarios, needed to establish setback distances in building codes and minimize the overall data gaps in code development; support and facilitate the completion of technical specifications by the International Organization for Standardization (ISO) for gaseous hydrogen refueling (TS 20012) and standards for on-board liquid (ISO 13985) and gaseous or gaseous blend (ISO 15869) hydrogen storage by 2007; support and facilitate the effort, led by the NFPA,more » to complete the draft Hydrogen Technologies Code (NFPA 2) by 2008; with experimental data and input from Technology Validation Program element activities, support and facilitate the completion of standards for bulk hydrogen storage (e.g., NFPA 55) by 2008; facilitate the adoption of the most recently available model codes (e.g., from the International Code Council [ICC]) in key regions; complete preliminary research and development on hydrogen release scenarios to support the establishment of setback distances in building codes and provide a sound basis for model code development and adoption; support and facilitate the development of Global Technical Regulations (GTRs) by 2010 for hydrogen vehicle systems under the United Nations Economic Commission for Europe, World Forum for Harmonization of Vehicle Regulations and Working Party on Pollution and Energy Program (ECE-WP29/GRPE); and to Support and facilitate the completion by 2012 of necessary codes and standards needed for the early commercialization and market entry of hydrogen energy technologies.« less

Aboriginal parent support: A partnership approach.

PubMed

Munns, Ailsa; Toye, Christine; Hegney, Desley; Kickett, Marion; Marriott, Rhonda; Walker, Roz

2018-02-01

This study was positioned within a larger action research study relating to a peer-led Aboriginal home visiting parent support program in an urban Western Australian setting. The aims for this study component were to identify program elements, exploring participants' perceptions of the program's suitability, feasibility, acceptability and effectiveness to inform program model recommendations and add to the body of knowledge on effective Aboriginal peer-led program models. The ability of Aboriginal parents to develop positive family environments is crucial, with parent support needing to be reflexive to local needs and sociocultural influences. Culturally appropriate service provision needs meaningful and acceptable strategies. This study was situated within a critical paradigm supporting Participatory Action Research methodology, using Action Learning Sets as the participant engagement and data collection setting. Within ten Action Learning Sets, focus group interviews were carried out with Aboriginal peer support workers, a non-Aboriginal parent support worker, an Aboriginal program coordinator, an Aboriginal education support officer and non-Aboriginal program managers (n = 8), and individual interviews with parents (n = 2) and community agencies (n = 4). Data were analysed using thematic analysis. Five themes were derived from peer support worker and community agency cohorts: peer support worker home visiting skills; responding to impacts of social determinants of health; client support and engagement; interagency collaboration; and issues addressing program sustainability. Parent responses augmented these themes. Participants identified five key elements relating to peer-led home visiting support for Aboriginal parents. These are uniquely placed to inform ongoing program development as there is little additional evidence in wider national and international contexts. Engagement with communities and peer support workers to develop culturally relevant partnerships with Aboriginal families is integral to contemporary child health practice. Ongoing nurse support is needed for peer support worker role development. Indigenous Australian peoples are people who identify as Aboriginal or Torres Strait Islander. Respectfully, throughout this paper, they will be described as Aboriginal. © 2017 John Wiley & Sons Ltd.

Baylor Gyro Pump: a completely seal-less centrifugal pump aiming for long-term circulatory support.

PubMed

Ohara, Y; Sakuma, I; Makinouchi, K; Damm, G; Glueck, J; Mizuguchi, K; Naito, K; Tasai, K; Orime, Y; Takatani, S

1993-07-01

A seal-less centrifugal pump aiming for long-term circulatory support has been developed. In this model, shaft seals that cause thrombus formation and blood leakage were eliminated. A brushless direct current motor was incorporated as a driving unit, and pivot bearings were used to support the impeller. With reference to its motor-driven system, this pump was named the M-Gyro Pump. The first model (M1) yielded an index of hemolysis of 0.005 g/100 L using bovine blood and demonstrated satisfactory performance as a right heart assist for 2 days (4 L/min, 60 mm Hg, 1,800 rpm). The second model (M2) has been developed for left heart assist by employing a stronger motor. The pump capacity was improved to 6 L/min against 240 mm Hg at 1,800 rpm, but significant heat generation was observed. By optimization of motor efficiency, the M2 model can be improved to meet the requirements of a pump for left heart assist.

A Methodology for Multiple Rule System Integration and Resolution Within a Singular Knowledge Base

NASA Technical Reports Server (NTRS)

Kautzmann, Frank N., III

1988-01-01

Expert Systems which support knowledge representation by qualitative modeling techniques experience problems, when called upon to support integrated views embodying description and explanation, especially when other factors such as multiple causality, competing rule model resolution, and multiple uses of knowledge representation are included. A series of prototypes are being developed to demonstrate the feasibility of automating the process of systems engineering, design and configuration, and diagnosis and fault management. A study involves not only a generic knowledge representation; it must also support multiple views at varying levels of description and interaction between physical elements, systems, and subsystems. Moreover, it will involve models of description and explanation for each level. This multiple model feature requires the development of control methods between rule systems and heuristics on a meta-level for each expert system involved in an integrated and larger class of expert system. The broadest possible category of interacting expert systems is described along with a general methodology for the knowledge representation and control of mutually exclusive rule systems.

Towards decision support for waiting lists: an operations management view.

PubMed

Vissers, J M; Van Der Bij, J D; Kusters, R J

2001-06-01

This paper considers the phenomenon of waiting lists in a healthcare setting, which is characterised by limitations on the national expenditure, to explore the potentials of an operations management perspective. A reference framework for waiting list management is described, distinguishing different levels of planning in healthcare--national, regional, hospital and process--that each contributes to the existence of waiting lists through managerial decision making. In addition, different underlying mechanisms in demand and supply are distinguished, which together explain the development of waiting lists. It is our contention that within this framework a series of situation specific models should be designed to support communication and decision making. This is illustrated by the modelling of the demand for cataract treatment in a regional setting in the south-eastern part of the Netherlands. An input-output model was developed to support decisions regarding waiting lists. The model projects the demand for treatment at a regional level and makes it possible to evaluate waiting list impacts for different scenarios to meet this demand.

A physiome interoperability roadmap for personalized drug development

PubMed Central

2016-01-01

The goal of developing therapies and dosage regimes for characterized subgroups of the general population can be facilitated by the use of simulation models able to incorporate information about inter-individual variability in drug disposition (pharmacokinetics), toxicity and response effect (pharmacodynamics). Such observed variability can have multiple causes at various scales, ranging from gross anatomical differences to differences in genome sequence. Relevant data for many of these aspects, particularly related to molecular assays (known as ‘-omics’), are available in online resources, but identification and assignment to appropriate model variables and parameters is a significant bottleneck in the model development process. Through its efforts to standardize annotation with consequent increase in data usability, the human physiome project has a vital role in improving productivity in model development and, thus, the development of personalized therapy regimes. Here, we review the current status of personalized medicine in clinical practice, outline some of the challenges that must be overcome in order to expand its applicability, and discuss the relevance of personalized medicine to the more widespread challenges being faced in drug discovery and development. We then review some of (i) the key data resources available for use in model development and (ii) the potential areas where advances made within the physiome modelling community could contribute to physiologically based pharmacokinetic and physiologically based pharmacokinetic/pharmacodynamic modelling in support of personalized drug development. We conclude by proposing a roadmap to further guide the physiome community in its on-going efforts to improve data usability, and integration with modelling efforts in the support of personalized medicine development. PMID:27051513

Diverting the tourists: a spatial decision-support system for tourism planning on a developing island

NASA Astrophysics Data System (ADS)

Beedasy, Jaishree; Whyatt, Duncan

Mauritius is a small island (1865 km 2) in the Indian Ocean. Tourism is the third largest economic sector of the country, after manufacturing and agriculture. A limitation of space and the island's vulnerable ecosystem warrants a rational approach to tourism development. The main problems so far have been to manipulate and integrate all the factors affecting tourism planning and to match spatial data with their relevant attributes. A Spatial Decision Support System (SDSS) for sustainable tourism planning is therefore proposed. The proposed SDSS design would include a GIS as its core component. A first GIS model has already been constructed with available data. Supporting decision-making in a spatial context is implicit in the use of GIS. However the analytical capability of the GIS has to be enhanced to solve semi-structured problems, where subjective judgements come into play. The second part of the paper deals with the choice, implementation and customisation of a relevant model to develop a specialised SDSS. Different types of models and techniques are discussed, in particular a comparison of compensatory and non-compensatory approaches to multicriteria evaluation (MCE). It is concluded that compensatory multicriteria evaluation techniques increase the scope of the present GIS model as a decision-support tool. This approach gives the user or decision-maker the flexibility to change the importance of each criterion depending on relevant objectives.

Developing a Model Component

NASA Technical Reports Server (NTRS)

Fields, Christina M.

2013-01-01

The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

A methodology for model-based development and automated verification of software for aerospace systems

NASA Astrophysics Data System (ADS)

Martin, L.; Schatalov, M.; Hagner, M.; Goltz, U.; Maibaum, O.

Today's software for aerospace systems typically is very complex. This is due to the increasing number of features as well as the high demand for safety, reliability, and quality. This complexity also leads to significant higher software development costs. To handle the software complexity, a structured development process is necessary. Additionally, compliance with relevant standards for quality assurance is a mandatory concern. To assure high software quality, techniques for verification are necessary. Besides traditional techniques like testing, automated verification techniques like model checking become more popular. The latter examine the whole state space and, consequently, result in a full test coverage. Nevertheless, despite the obvious advantages, this technique is rarely yet used for the development of aerospace systems. In this paper, we propose a tool-supported methodology for the development and formal verification of safety-critical software in the aerospace domain. The methodology relies on the V-Model and defines a comprehensive work flow for model-based software development as well as automated verification in compliance to the European standard series ECSS-E-ST-40C. Furthermore, our methodology supports the generation and deployment of code. For tool support we use the tool SCADE Suite (Esterel Technology), an integrated design environment that covers all the requirements for our methodology. The SCADE Suite is well established in avionics and defense, rail transportation, energy and heavy equipment industries. For evaluation purposes, we apply our approach to an up-to-date case study of the TET-1 satellite bus. In particular, the attitude and orbit control software is considered. The behavioral models for the subsystem are developed, formally verified, and optimized.

76 FR 69769 - Annual Public Meeting of the Interagency Steering Committee on Multimedia Environmental Modeling

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... assessments of site specific, generic, and process-oriented multimedia environmental models as they pertain to human and environmental health risk assessment. Multimedia model development and simulation supports...

Enhancing Interdisciplinary Human System Risk Research Through Modeling and Network Approaches

NASA Technical Reports Server (NTRS)

Mindock, Jennifer; Lumpkins, Sarah; Shelhamer, Mark

2015-01-01

NASA's Human Research Program (HRP) supports research to reduce human health and performance risks inherent in future human space exploration missions. Understanding risk outcomes and contributing factors in an integrated manner allows HRP research to support development of efficient and effective mitigations from cross-disciplinary perspectives, and to enable resilient human and engineered systems for spaceflight. The purpose of this work is to support scientific collaborations and research portfolio management by utilizing modeling for analysis and visualization of current and potential future interdisciplinary efforts.

The FLEXTRA kit: a model for instructor support materials.

PubMed

Battles, J B; Sheridan, M M

1989-01-01

The FLEXTRA Kit is a model for the development of resource materials to support instructor-delivered continuing education. Each FLEXTRA Kit consists of camera-ready copy of handout materials; presentation slides, overheads, videotapes, etc.; evaluation instruments; and an instructor's guide. The FLEXTRA Kit is packaged in such a way that it can be easily shipped and stored. Desktop publishing makes the production of FLEXTRA Kits a cost-effective means of providing support to repeated and locally variable training events.

Technology evaluation, assessment, modeling, and simulation: the TEAMS capability

NASA Astrophysics Data System (ADS)

Holland, Orgal T.; Stiegler, Robert L.

1998-08-01

The United States Marine Corps' Technology Evaluation, Assessment, Modeling and Simulation (TEAMS) capability, located at the Naval Surface Warfare Center in Dahlgren Virginia, provides an environment for detailed test, evaluation, and assessment of live and simulated sensor and sensor-to-shooter systems for the joint warfare community. Frequent use of modeling and simulation allows for cost effective testing, bench-marking, and evaluation of various levels of sensors and sensor-to-shooter engagements. Interconnectivity to live, instrumented equipment operating in real battle space environments and to remote modeling and simulation facilities participating in advanced distributed simulations (ADS) exercises is available to support a wide- range of situational assessment requirements. TEAMS provides a valuable resource for a variety of users. Engineers, analysts, and other technology developers can use TEAMS to evaluate, assess and analyze tactical relevant phenomenological data on tactical situations. Expeditionary warfare and USMC concept developers can use the facility to support and execute advanced warfighting experiments (AWE) to better assess operational maneuver from the sea (OMFTS) concepts, doctrines, and technology developments. Developers can use the facility to support sensor system hardware, software and algorithm development as well as combat development, acquisition, and engineering processes. Test and evaluation specialists can use the facility to plan, assess, and augment their processes. This paper presents an overview of the TEAMS capability and focuses specifically on the technical challenges associated with the integration of live sensor hardware into a synthetic environment and how those challenges are being met. Existing sensors, recent experiments and facility specifications are featured.

Maryland Family Support Services Consortium. Final Report.

ERIC Educational Resources Information Center

Gardner, James F.; Markowitz, Ricka Keeney

The Maryland Family Support Services Consortium is a 3-year demonstration project which developed unique family support models at five sites serving the needs of families with a developmentally disabled child (ages birth to 21). Caseworkers provided direct intensive services to 224 families over the 3-year period, including counseling, liaison and…

Developing Peer Supports for College Students with Intellectual and Developmental Disabilities

ERIC Educational Resources Information Center

Griffin, Megan M.; Wendel, Kelly F.; Day, Tammy L.; McMillan, Elise D.

2016-01-01

Many postsecondary education programs for students with intellectual and developmental disabilities (IDD) provide support to these students by matching them with peer mentors. Though this practice is widely used, the scholarly literature offers little information about successful peer support models in higher education settings. To address this…

A Personalized Faculty Peer Support Program: Less Can Be More

ERIC Educational Resources Information Center

Fox, Laurie

2012-01-01

This program description presents a unique, radically simple mentoring model for post-secondary institutions. The Faculty Peer Support Program invites all faculty members, regardless of rank, to connect for personalized professional development support. Participants self-select partner(s), meeting times, places, and topics. They also self-direct…

Advisors, Faculty, and Librarians: Collaborating for Student Success

ERIC Educational Resources Information Center

Guy, Ashley; Eimer, Lisa

2016-01-01

Librarians have continuously struggled with developing quality relationships with faculty and advisors to support students online. In 2014, Rasmussen College introduced a one-stop student support model of service that makes a student's advisor their primary point of contact for library resources, academic support, financial aid, course scheduling,…

Probabilistic Structural Analysis Methods (PSAM) for select space propulsion system components, part 2

NASA Technical Reports Server (NTRS)

1991-01-01

The technical effort and computer code enhancements performed during the sixth year of the Probabilistic Structural Analysis Methods program are summarized. Various capabilities are described to probabilistically combine structural response and structural resistance to compute component reliability. A library of structural resistance models is implemented in the Numerical Evaluations of Stochastic Structures Under Stress (NESSUS) code that included fatigue, fracture, creep, multi-factor interaction, and other important effects. In addition, a user interface was developed for user-defined resistance models. An accurate and efficient reliability method was developed and was successfully implemented in the NESSUS code to compute component reliability based on user-selected response and resistance models. A risk module was developed to compute component risk with respect to cost, performance, or user-defined criteria. The new component risk assessment capabilities were validated and demonstrated using several examples. Various supporting methodologies were also developed in support of component risk assessment.

Object-oriented model-driven control

NASA Technical Reports Server (NTRS)

Drysdale, A.; Mcroberts, M.; Sager, J.; Wheeler, R.

1994-01-01

A monitoring and control subsystem architecture has been developed that capitalizes on the use of modeldriven monitoring and predictive control, knowledge-based data representation, and artificial reasoning in an operator support mode. We have developed an object-oriented model of a Controlled Ecological Life Support System (CELSS). The model based on the NASA Kennedy Space Center CELSS breadboard data, tracks carbon, hydrogen, and oxygen, carbodioxide, and water. It estimates and tracks resorce-related parameters such as mass, energy, and manpower measurements such as growing area required for balance. We are developing an interface with the breadboard systems that is compatible with artificial reasoning. Initial work is being done on use of expert systems and user interface development. This paper presents an approach to defining universally applicable CELSS monitor and control issues, and implementing appropriate monitor and control capability for a particular instance: the KSC CELSS Breadboard Facility.

Enabling Real-time Water Decision Support Services Using Model as a Service

NASA Astrophysics Data System (ADS)

Zhao, T.; Minsker, B. S.; Lee, J. S.; Salas, F. R.; Maidment, D. R.; David, C. H.

2014-12-01

Through application of computational methods and an integrated information system, data and river modeling services can help researchers and decision makers more rapidly understand river conditions under alternative scenarios. To enable this capability, workflows (i.e., analysis and model steps) are created and published as Web services delivered through an internet browser, including model inputs, a published workflow service, and visualized outputs. The RAPID model, which is a river routing model developed at University of Texas Austin for parallel computation of river discharge, has been implemented as a workflow and published as a Web application. This allows non-technical users to remotely execute the model and visualize results as a service through a simple Web interface. The model service and Web application has been prototyped in the San Antonio and Guadalupe River Basin in Texas, with input from university and agency partners. In the future, optimization model workflows will be developed to link with the RAPID model workflow to provide real-time water allocation decision support services.

BNL program in support of LWR degraded-core accident analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ginsberg, T.; Greene, G.A.

1982-01-01

Two major sources of loading on dry watr reactor containments are steam generatin from core debris water thermal interactions and molten core-concrete interactions. Experiments are in progress at BNL in support of analytical model development related to aspects of the above containment loading mechanisms. The work supports development and evaluation of the CORCON (Muir, 1981) and MARCH (Wooton, 1980) computer codes. Progress in the two programs is described in this paper. 8 figures.

Combining the Generic Entity-Attribute-Value Model and Terminological Models into a Common Ontology to Enable Data Integration and Decision Support.

PubMed

Bouaud, Jacques; Guézennec, Gilles; Séroussi, Brigitte

2018-01-01

The integration of clinical information models and termino-ontological models into a unique ontological framework is highly desirable for it facilitates data integration and management using the same formal mechanisms for both data concepts and information model components. This is particularly true for knowledge-based decision support tools that aim to take advantage of all facets of semantic web technologies in merging ontological reasoning, concept classification, and rule-based inferences. We present an ontology template that combines generic data model components with (parts of) existing termino-ontological resources. The approach is developed for the guideline-based decision support module on breast cancer management within the DESIREE European project. The approach is based on the entity attribute value model and could be extended to other domains.