A Distributed Synchronization and Timing System on the EAST Tokamak

NASA Astrophysics Data System (ADS)

Luo, Jiarong; Wu, Yichun; Shu, Yantai

2008-08-01

A key requirement for the EAST distributed control system (EASTDCS) is time synchronization to an accuracy of <1 mus. In 2006 a Distributed Synchronization and Timing System (DSTS) was set up, which is based on the ATmega128 AVR microcontroller and the Nut/OS embedded Real Time Operating System (RTOS). The DSTS provides the control and the data acquisition systems with reference clocks (0.01 Hz 10 MHz) and delayed trigger times ( 1 mus 4294 s). These are produced by a Core Module Unit (CMU) connected by optical fibres to many Local Synchronized Node Units (LSNU). The fibres provide immunity from electrical noise and are of equal length to match clock and trigger delays between systems. This paper describes the architecture of the DSTS on the EAST tokamak and provides an overview of the characteristics of the main and local units.

HANFORD DST THERMAL & SEISMIC PROJECT ANSYS BENCHMARK ANALYSIS OF SEISMIC INDUCED FLUID STRUCTURE INTERACTION IN A HANFORD DOUBLE SHELL PRIMARY TANK

DOE Office of Scientific and Technical Information (OSTI.GOV)

MACKEY, T.C.

M&D Professional Services, Inc. (M&D) is under subcontract to Pacific Northwest National Laboratories (PNNL) to perform seismic analysis of the Hanford Site Double-Shell Tanks (DSTs) in support of a project entitled ''Double-Shell Tank (DSV Integrity Project-DST Thermal and Seismic Analyses)''. The overall scope of the project is to complete an up-to-date comprehensive analysis of record of the DST System at Hanford in support of Tri-Party Agreement Milestone M-48-14. The work described herein was performed in support of the seismic analysis of the DSTs. The thermal and operating loads analysis of the DSTs is documented in Rinker et al. (2004). Themore » overall seismic analysis of the DSTs is being performed with the general-purpose finite element code ANSYS. The overall model used for the seismic analysis of the DSTs includes the DST structure, the contained waste, and the surrounding soil. The seismic analysis of the DSTs must address the fluid-structure interaction behavior and sloshing response of the primary tank and contained liquid. ANSYS has demonstrated capabilities for structural analysis, but the capabilities and limitations of ANSYS to perform fluid-structure interaction are less well understood. The purpose of this study is to demonstrate the capabilities and investigate the limitations of ANSYS for performing a fluid-structure interaction analysis of the primary tank and contained waste. To this end, the ANSYS solutions are benchmarked against theoretical solutions appearing in BNL 1995, when such theoretical solutions exist. When theoretical solutions were not available, comparisons were made to theoretical solutions of similar problems and to the results from Dytran simulations. The capabilities and limitations of the finite element code Dytran for performing a fluid-structure interaction analysis of the primary tank and contained waste were explored in a parallel investigation (Abatt 2006). In conjunction with the results of the global ANSYS analysis reported in Carpenter et al. (2006), the results of the two investigations will be compared to help determine if a more refined sub-model of the primary tank is necessary to capture the important fluid-structure interaction effects in the tank and if so, how to best utilize a refined sub-model of the primary tank. Both rigid tank and flexible tank configurations were analyzed with ANSYS. The response parameters of interest are total hydrodynamic reaction forces, impulsive and convective mode frequencies, waste pressures, and slosh heights. To a limited extent: tank stresses are also reported. The results of this study demonstrate that the ANSYS model has the capability to adequately predict global responses such as frequencies and overall reaction forces. Thus, the model is suitable for predicting the global response of the tank and contained waste. On the other hand, while the ANSYS model is capable of adequately predicting waste pressures and primary tank stresses in a large portion of the waste tank, the model does not accurately capture the convective behavior of the waste near the free surface, nor did the model give accurate predictions of slosh heights. Based on the ability of the ANSYS benchmark model to accurately predict frequencies and global reaction forces and on the results presented in Abatt, et al. (2006), the global ANSYS model described in Carpenter et al. (2006) is sufficient for the seismic evaluation of all tank components except for local areas of the primary tank. Due to the limitations of the ANSYS model in predicting the convective response of the waste, the evaluation of primary tank stresses near the waste free surface should be supplemented by results from an ANSYS sub-model of the primary tank that incorporates pressures from theoretical solutions or from Dytran solutions. However, the primary tank is expected to have low demand to capacity ratios in the upper wall. Moreover, due to the less than desired mesh resolution in the primary tank knuckle of the global ANSYS model, the evaluation of the primary tank stresses in the lower knuckle should be supplemented by results from a more refined ANSYS sub-model of the primary tank that incorporates pressures from theoretical solutions or from Dytran solutions.« less

Modelling the impacts of agricultural management practices on river water quality in Eastern England.

PubMed

Taylor, Sam D; He, Yi; Hiscock, Kevin M

2016-09-15

Agricultural diffuse water pollution remains a notable global pressure on water quality, posing risks to aquatic ecosystems, human health and water resources and as a result legislation has been introduced in many parts of the world to protect water bodies. Due to their efficiency and cost-effectiveness, water quality models have been increasingly applied to catchments as Decision Support Tools (DSTs) to identify mitigation options that can be introduced to reduce agricultural diffuse water pollution and improve water quality. In this study, the Soil and Water Assessment Tool (SWAT) was applied to the River Wensum catchment in eastern England with the aim of quantifying the long-term impacts of potential changes to agricultural management practices on river water quality. Calibration and validation were successfully performed at a daily time-step against observations of discharge, nitrate and total phosphorus obtained from high-frequency water quality monitoring within the Blackwater sub-catchment, covering an area of 19.6 km(2). A variety of mitigation options were identified and modelled, both singly and in combination, and their long-term effects on nitrate and total phosphorus losses were quantified together with the 95% uncertainty range of model predictions. Results showed that introducing a red clover cover crop to the crop rotation scheme applied within the catchment reduced nitrate losses by 19.6%. Buffer strips of 2 m and 6 m width represented the most effective options to reduce total phosphorus losses, achieving reductions of 12.2% and 16.9%, respectively. This is one of the first studies to quantify the impacts of agricultural mitigation options on long-term water quality for nitrate and total phosphorus at a daily resolution, in addition to providing an estimate of the uncertainties of those impacts. The results highlighted the need to consider multiple pollutants, the degree of uncertainty associated with model predictions and the risk of unintended pollutant impacts when evaluating the effectiveness of mitigation options, and showed that high-frequency water quality datasets can be applied to robustly calibrate water quality models, creating DSTs that are more effective and reliable. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Pop-up satellite archival tag effects on the diving behaviour, growth and survival of adult Atlantic salmon Salmo salar at sea.

PubMed

Hedger, R D; Rikardsen, A H; Thorstad, E B

2017-01-01

The effects of large, externally attached pop-up satellite archival tags (PSATs) were compared with those of small implanted data storage tags (DSTs) on adult Atlantic salmon Salmo salar during their ocean migration in regards to depth utilization, diving depth, diving rate, diving speed and temperatures experienced. Additionally the return rate and growth of individuals tagged with PSATs was compared with those of small acoustic tags and DSTs. Overall, the depth distribution of individuals tagged with PSATs was similar to that of those tagged with DSTs, reflecting the pelagic nature of S. salar at sea. Individuals tagged with PSATs, however, dived less frequently and to shallower depths, and dived and surfaced at slower velocities. Sea surface temperatures experienced by individuals tagged with PSATs were similar to those experienced by those tagged with DSTs for the same time of year, suggesting that there were no large differences in the ocean migration. Return rates did not depend on whether individuals were tagged with PSATs or not, indicating that survival at sea was not impacted by PSATs in comparison to small internal tags. Individuals tagged with PSATs, however, had a smaller increase in body mass than those tagged with acoustic tags or DSTs. It was concluded that PSATs are suitable for use in researching large-scale migratory behaviour of adult S. salar at sea, but that some effects on their behaviour from tagging must be expected. Effects of PSATs may be largest in the short term when S. salar are swimming in bursts at high speeds. Even though individuals tagged with PSATs performed deep and frequent dives, the results of this study suggest that untagged individuals would perform even deeper and more frequent dives than tagged individuals. © 2016 The Fisheries Society of the British Isles.

Inclusion of social indicators in decision support tools for the selection of sustainable site remediation options.

PubMed

Cappuyns, Valérie

2016-12-15

Sustainable remediation requires a balanced decision-making process in which environmental, economic and social aspects of different remediation options are all considered together and the optimum remediation solution is selected. More attention has been paid to the evaluation of environmental and economic aspects, in particular to reduce the human and environmental risks and the remediation costs, to the exclusion of social aspects of remediation. This paper investigates how social aspects are currently considered in sustainability assessments of remediation projects. A selection of decision support tools (DSTs), used for the sustainability assessment of a remediation project, is analyzed to define how social aspects are considered in those tools. The social indicator categories of the Sustainable Remediation Forum - United Kingdom (SuRF-UK), are used as a basis for this evaluation. The consideration of social aspects in the investigated decision support tools is limited, but a clear increase is noticed in more recently developed tools. Among the five social indicator categories defined by SuRF-UK to facilitate a holistic consideration of social aspects of a remediation project only "Human health and safety" is systematically taken into account. "Neighbourhood and locality" is also often addressed, mostly emphasizing the potential disturbance caused by the remediation activities. However, the evaluation of 'Ethics and Equality', Communities and community involvement', and 'Uncertainty and evidence' is often neglected. Nevertheless, concrete examples can be found in some of the investigated tools. Specific legislation, standard procedures, and guidelines that have to be followed in a region or country are mainly been set up in the context of protecting human and ecosystem health, safety and prevention of nuisance. However, they sometimes already include some of the aspects addressed by the social indicators. In this perspective the use of DST to evaluate the sustainability of a site remediation project, should be tuned to the legislation, guidelines and procedures that are in force in a specific country or region. Copyright © 2016 Elsevier Ltd. All rights reserved.

Soyuz 7 Return Samples: Assessment of Air Quality Aboard the International Space Station

NASA Technical Reports Server (NTRS)

James, John T.

2004-01-01

The toxicological assessments of one grab sample canister (GSC), 6 dual sorbent tubes (DSTs), and 20 formaldehyde badges returned aboard Soyuz 7 are reported. Analytical methods have not changed from earlier reports. Surrogate standard recoveries from the GSC were 84-89%. The recoveries of the less volatile surrogates from the DSTs were 87 to 112%; however, 13C-acetone was only recovered at 53-59%. Formaldehyde recoveries from 2 lab controls were 87 and 95%; trip controls were not returned to ground.

Selection of the Next Generation of Air Traffic Control Specialists: Aptitude Requirements for the Air Traffic Control Tower Cab in 2018

DTIC Science & Technology

2013-03-01

Sequencing; and 5) Taxi Routing (with Conformance Monitoring). Third, the impact of these DSTs on tower cab operational activities, sub-activities...keystroke or interface level. Fourth, the impact of the DSTs on aptitudes required of controllers is evaluated. The importance of the following aptitudes...Analysis of Mid-Term NextGen Impact on Aptitudes Required in the ATCT Cab ---------------- 36 Mid-Term DST Impact on Tower Cab Controller Roles

Minimum Equipment Lists, Flight Rules and ... Past, Present and Future of Safety Pre-Determined Decisions for Operations

NASA Astrophysics Data System (ADS)

Herd, A.; Wolff, M.

2012-01-01

Extended mission operations, such as human spaceflight to Mars provide an opportunity for take current human exploration beyond Low Earth Orbit, such as the operations undertaken on the International Space Station (ISS). This opportunity also presents a challenge in terms of extending what we currently understand as "remote operations" performed on ISS, offering learning beyond that gained from the successful moon- lander expeditions. As such there is a need to assess how the existing operations concept of ground support teams directing (and supporting) on-orbit ISS operations can be applied in the extended mission concept. The current mission support concept involves three interacting operations products - a short term plan, crew procedures and flight rules. Flight rules (for ISS operations) currently provide overall planning, engineering and operations constraints (including those derived from a safety perspective) in the form of a rule book. This paper will focus specifically on flight rules, and describe the current use of them, and assess the future role of flight rules to support exploration, including the deployment of decision support tools (DSTs) to ensure flight rule compliancy for missions with minimal ground support. Taking consideration of the historical development of pre-planned decisions, and their manifestation within the operations environment, combined with the extended remoteness of human exploration missions, we will propose a future development of this product and a platform on which it could be presented.

Screening tests for the rapid detection of diarrhetic shellfish toxins in Washington State.

PubMed

Eberhart, Bich-Thuy L; Moore, Leslie K; Harrington, Neil; Adams, Nicolaus G; Borchert, Jerry; Trainer, Vera L

2013-09-30

The illness of three people due to diarrhetic shellfish poisoning (DSP) following their ingestion of recreationally harvested mussels from Sequim Bay State Park in the summer of 2011, resulted in intensified monitoring for diarrhetic shellfish toxins (DSTs) in Washington State. Rapid testing at remote sites was proposed as a means to provide early warning of DST events in order to protect human health and allow growers to test "pre-harvest" shellfish samples, thereby preventing harvest of toxic product that would later be destroyed or recalled. Tissue homogenates from several shellfish species collected from two sites in Sequim Bay, WA in the summer 2012, as well as other sites throughout Puget Sound, were analyzed using three rapid screening methods: a lateral flow antibody-based test strip (Jellett Rapid Test), an enzyme-linked immunosorbent assay (ELISA) and a protein phosphatase 2A inhibition assay (PP2A). The results were compared to the standard regulatory method of liquid chromatography coupled with tandem mass spectroscopy (LC-MS/MS). The Jellett Rapid Test for DSP gave an unacceptable number of false negatives due to incomplete extraction of DSTs using the manufacturer's recommended method while the ELISA antibody had low cross-reactivity with dinophysistoxin-1, the major toxin isomer in shellfish from the region. The PP2A test showed the greatest promise as a screening tool for Washington State shellfish harvesters.

Screening Tests for the Rapid Detection of Diarrhetic Shellfish Toxins in Washington State

PubMed Central

Eberhart, Bich-Thuy L.; Moore, Leslie K.; Harrington, Neil; Adams, Nicolaus G.; Borchert, Jerry; Trainer, Vera L.

2013-01-01

The illness of three people due to diarrhetic shellfish poisoning (DSP) following their ingestion of recreationally harvested mussels from Sequim Bay State Park in the summer of 2011, resulted in intensified monitoring for diarrhetic shellfish toxins (DSTs) in Washington State. Rapid testing at remote sites was proposed as a means to provide early warning of DST events in order to protect human health and allow growers to test “pre-harvest” shellfish samples, thereby preventing harvest of toxic product that would later be destroyed or recalled. Tissue homogenates from several shellfish species collected from two sites in Sequim Bay, WA in the summer 2012, as well as other sites throughout Puget Sound, were analyzed using three rapid screening methods: a lateral flow antibody-based test strip (Jellett Rapid Test), an enzyme-linked immunosorbent assay (ELISA) and a protein phosphatase 2A inhibition assay (PP2A). The results were compared to the standard regulatory method of liquid chromatography coupled with tandem mass spectroscopy (LC-MS/MS). The Jellett Rapid Test for DSP gave an unacceptable number of false negatives due to incomplete extraction of DSTs using the manufacturer’s recommended method while the ELISA antibody had low cross-reactivity with dinophysistoxin-1, the major toxin isomer in shellfish from the region. The PP2A test showed the greatest promise as a screening tool for Washington State shellfish harvesters. PMID:24084788

Diarrhetic Shellfish Toxins and Other Lipophilic Toxins of Human Health Concern in Washington State

PubMed Central

Trainer, Vera L.; Moore, Leslie; Bill, Brian D.; Adams, Nicolaus G.; Harrington, Neil; Borchert, Jerry; da Silva, Denis A. M.; Eberhart, Bich-Thuy L.

2013-01-01

The illness of three people in 2011 after their ingestion of mussels collected from Sequim Bay State Park, Washington State, USA, demonstrated the need to monitor diarrhetic shellfish toxins (DSTs) in Washington State for the protection of human health. Following these cases of diarrhetic shellfish poisoning, monitoring for DSTs in Washington State became formalized in 2012, guided by routine monitoring of Dinophysis species by the SoundToxins program in Puget Sound and the Olympic Region Harmful Algal Bloom (ORHAB) partnership on the outer Washington State coast. Here we show that the DSTs at concentrations above the guidance level of 16 μg okadaic acid (OA) + dinophysistoxins (DTXs)/100 g shellfish tissue were widespread in sentinel mussels throughout Puget Sound in summer 2012 and included harvest closures of California mussel, varnish clam, manila clam and Pacific oyster. Concentrations of toxins in Pacific oyster and manila clam were often at least half those measured in blue mussels at the same site. The primary toxin isomer in shellfish and plankton samples was dinophysistoxin-1 (DTX-1) with D. acuminata as the primary Dinophysis species. Other lipophilic toxins in shellfish were pectenotoxin-2 (PTX-2) and yessotoxin (YTX) with azaspiracid-2 (AZA-2) also measured in phytoplankton samples. Okadaic acid, azaspiracid-1 (AZA-1) and azaspiracid-3 (AZA-3) were all below the levels of detection by liquid chromatography tandem mass spectrometry (LC-MS/MS). A shellfish closure at Ruby Beach, Washington, was the first ever noted on the Washington State Pacific coast due to DSTs. The greater than average Fraser River flow during the summers of 2011 and 2012 may have provided an environment conducive to dinoflagellates and played a role in the prevalence of toxigenic Dinophysis in Puget Sound. PMID:23760013

Diarrhetic shellfish toxins and other lipophilic toxins of human health concern in Washington State.

PubMed

Trainer, Vera L; Moore, Leslie; Bill, Brian D; Adams, Nicolaus G; Harrington, Neil; Borchert, Jerry; da Silva, Denis A M; Eberhart, Bich-Thuy L

2013-05-28

The illness of three people in 2011 after their ingestion of mussels collected from Sequim Bay State Park, Washington State, USA, demonstrated the need to monitor diarrhetic shellfish toxins (DSTs) in Washington State for the protection of human health. Following these cases of diarrhetic shellfish poisoning, monitoring for DSTs in Washington State became formalized in 2012, guided by routine monitoring of Dinophysis species by the SoundToxins program in Puget Sound and the Olympic Region Harmful Algal Bloom (ORHAB) partnership on the outer Washington State coast. Here we show that the DSTs at concentrations above the guidance level of 16 μg okadaic acid (OA) + dinophysistoxins (DTXs)/100 g shellfish tissue were widespread in sentinel mussels throughout Puget Sound in summer 2012 and included harvest closures of California mussel, varnish clam, manila clam and Pacific oyster. Concentrations of toxins in Pacific oyster and manila clam were often at least half those measured in blue mussels at the same site. The primary toxin isomer in shellfish and plankton samples was dinophysistoxin-1 (DTX-1) with D. acuminata as the primary Dinophysis species. Other lipophilic toxins in shellfish were pectenotoxin-2 (PTX-2) and yessotoxin (YTX) with azaspiracid-2 (AZA-2) also measured in phytoplankton samples. Okadaic acid, azaspiracid-1 (AZA-1) and azaspiracid-3 (AZA-3) were all below the levels of detection by liquid chromatography tandem mass spectrometry (LC-MS/MS). A shellfish closure at Ruby Beach, Washington, was the first ever noted on the Washington State Pacific coast due to DSTs. The greater than average Fraser River flow during the summers of 2011 and 2012 may have provided an environment conducive to dinoflagellates and played a role in the prevalence of toxigenic Dinophysis in Puget Sound.

Project W-211 Initial Tank Retrieval Systems (ITRS) Description of Operations for 241-AZ-102

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRIGGS, S.R.

2000-02-25

The primary purpose of the Initial Tank Retrieval Systems (ITRS) is to provide systems for retrieval of radioactive wastes stored in underground double-shell tanks (DSTs) for transfer to alternate storage, evaporation, pretreatment or treatment, while concurrently reducing risks associated with safety watch list and other DSTs. This Description of Operation (DOO) defines the control philosophy for the waste retrieval system for Tank 241-AZ-102 (AZ-102). This DOO provides a basis for the detailed design of the Project W-211 Retrieval Control System (RCS) for AZ-102 and also establishes test criteria for the RCS.

Sensor to User - NASA/EOS Data for Coastal Zone Management Applications Developed from Integrated Analyses: Verification, Validation and Benchmark Report

NASA Technical Reports Server (NTRS)

Hall, Callie; Arnone, Robert

2006-01-01

The NASA Applied Sciences Program seeks to transfer NASA data, models, and knowledge into the hands of end-users by forming links with partner agencies and associated decision support tools (DSTs). Through the NASA REASoN (Research, Education and Applications Solutions Network) Cooperative Agreement, the Oceanography Division of the Naval Research Laboratory (NRLSSC) is developing new products through the integration of data from NASA Earth-Sun System assets with coastal ocean forecast models and other available data to enhance coastal management in the Gulf of Mexico. The recipient federal agency for this research effort is the National Oceanic and Atmospheric Administration (NOAA). The contents of this report detail the effort to further the goals of the NASA Applied Sciences Program by demonstrating the use of NASA satellite products combined with data-assimilating ocean models to provide near real-time information to maritime users and coastal managers of the Gulf of Mexico. This effort provides new and improved capabilities for monitoring, assessing, and predicting the coastal environment. Coastal managers can exploit these capabilities through enhanced DSTs at federal, state and local agencies. The project addresses three major issues facing coastal managers: 1) Harmful Algal Blooms (HABs); 2) hypoxia; and 3) freshwater fluxes to the coastal ocean. A suite of ocean products capable of describing Ocean Weather is assembled on a daily basis as the foundation for this semi-operational multiyear effort. This continuous realtime capability brings decision makers a new ability to monitor both normal and anomalous coastal ocean conditions with a steady flow of satellite and ocean model conditions. Furthermore, as the baseline data sets are used more extensively and the customer list increased, customer feedback is obtained and additional customized products are developed and provided to decision makers. Continual customer feedback and response with new improved products are required between the researcher and customer. This document details the methods by which these coastal ocean products are produced including the data flow, distribution, and verification. Product applications and the degree to which these products are used successfully within NOAA and coordinated with the Mississippi Department of Marine Resources (MDMR) is benchmarked.

Critical review of decision support tools for sustainability assessment of site remediation options.

PubMed

Huysegoms, Lies; Cappuyns, Valérie

2017-07-01

In Europe alone, there are more than 2,5 million potentially contaminated sites of which 14% are expected to require remediation. Contaminated soil and groundwater can cause damage to human health as well as to valuable ecosystems. Globally more attention has been paid to this problem of soil contamination in the past decades. For example, more than 58 000 sites have been remediated in Europe between 2006 and 2011. Together with this increase in remediation projects there has been a surge in the development of new remediation technologies and decision support tools to be able to match every site and its specific characteristics to the best possible remediation alternative. In the past years the development of decision support tools (DST) has evolved in a more sustainable direction. Several DSTs added the claim not only to denote effective or technologically and economically feasible remediation alternatives but also to point out the more or most sustainable remediation alternatives. These trends in the evaluation of site remediation options left users with a confusing clew of possibly applicable tools to assist them in decision making for contaminated site remediation. This review provides a structured overview on the extent decision support tools for contaminated site remediation, that claim to assist in choosing the most sustainable remediation alternative, actually include the different elements of sustainability proposed in our assessment framework. The review contains an in-depth analysis of thirteen tools specifically developed to assess the sustainability of site remediation alternatives. This analysis is based on six criteria derived from the definition of sustainable development of the Brundtland report. The six criteria were concretized by using the three pillars of sustainability, applied to site remediation according to the SuRF-UK framework, two criteria derived from Life Cycle Assessment and Cost-Benefit Analysis, and an 'User friendly' criterion. These elements come together in a framework, drafted for this study, containing six criteria covering the environmental, economic, social, time, uncertainty aspects and user friendliness of a sustainable site remediation. The main remarks uncovered by this review are the imbalance of used indicators still expressing a strong preference for the environmental aspect at the expense of the economic and social aspects of sustainability, the lack of consistency in the terminology used within the field and the failure in adapting released tools to recent legislation or scientific advancements. Copyright © 2017 Elsevier Ltd. All rights reserved.

Description of waste pretreatment and interfacing systems dynamic simulation model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garbrick, D.J.; Zimmerman, B.D.

1995-05-01

The Waste Pretreatment and Interfacing Systems Dynamic Simulation Model was created to investigate the required pretreatment facility processing rates for both high level and low level waste so that the vitrification of tank waste can be completed according to the milestones defined in the Tri-Party Agreement (TPA). In order to achieve this objective, the processes upstream and downstream of the pretreatment facilities must also be included. The simulation model starts with retrieval of tank waste and ends with vitrification for both low level and high level wastes. This report describes the results of three simulation cases: one based on suggestedmore » average facility processing rates, one with facility rates determined so that approximately 6 new DSTs are required, and one with facility rates determined so that approximately no new DSTs are required. It appears, based on the simulation results, that reasonable facility processing rates can be selected so that no new DSTs are required by the TWRS program. However, this conclusion must be viewed with respect to the modeling assumptions, described in detail in the report. Also included in the report, in an appendix, are results of two sensitivity cases: one with glass plant water recycle steams recycled versus not recycled, and one employing the TPA SST retrieval schedule versus a more uniform SST retrieval schedule. Both recycling and retrieval schedule appear to have a significant impact on overall tank usage.« less

FACET: Future ATM Concepts Evaluation Tool

NASA Technical Reports Server (NTRS)

Bilmoria, Karl D.; Banavar, Sridhar; Chatterji, Gano B.; Sheth, Kapil S.; Grabbe, Shon

2000-01-01

FACET (Future ATM Concepts Evaluation Tool) is an Air Traffic Management research tool being developed at the NASA Ames Research Center. This paper describes the design, architecture and functionalities of FACET. The purpose of FACET is to provide E simulation environment for exploration, development and evaluation of advanced ATM concepts. Examples of these concepts include new ATM paradigms such as Distributed Air-Ground Traffic Management, airspace redesign and new Decision Support Tools (DSTs) for controllers working within the operational procedures of the existing air traffic control system. FACET is currently capable of modeling system-wide en route airspace operations over the contiguous United States. Airspace models (e.g., Center/sector boundaries, airways, locations of navigation aids and airports) are available from databases. A core capability of FACET is the modeling of aircraft trajectories. Using round-earth kinematic equations, aircraft can be flown along flight plan routes or great circle routes as they climb, cruise and descend according to their individual aircraft-type performance models. Performance parameters (e.g., climb/descent rates and speeds, cruise speeds) are obtained from data table lookups. Heading, airspeed and altitude-rate dynamics are also modeled. Additional functionalities will be added as necessary for specific applications. FACET software is written in Java and C programming languages. It is platform-independent, and can be run on a variety of computers. FACET has been designed with a modular software architecture to enable rapid integration of research prototype implementations of new ATM concepts. There are several advanced ATM concepts that are currently being implemented in FACET airborne separation assurance, dynamic density predictions, airspace redesign (re-sectorization), benefits of a controller DST for direct-routing, and the integration of commercial space transportation system operations into the U.S. National Airspace System (NAS).

Project W-211, initial tank retrieval systems, description of operations for 241-AP-102 and 241-AP-104

DOE Office of Scientific and Technical Information (OSTI.GOV)

RIECK, C.A.

1999-02-25

The primary purpose of the Initial Tank Retrieval Systems (ITRS) is to provide systems for retrieval of radioactive wastes stored in underground double-shell tanks (DSTS) for transfer to alternate storage, evaporation, pretreatment or treatment, while concurrently reducing risks associated with safety watch list and other DSTs. This Description of Operations (DOO) defines the control philosophy for the waste retrieval system for tanks 241-AP-102 (AP-102) and 241-AP-104 (AP-104). This DOO will provide a basis for the detailed design of the Retrieval Control System (RCS) for AP-102 and AP-104 and establishes test criteria for the RCS. The test criteria will be usedmore » during qualification testing and acceptance testing to verify operability.« less

Two simple models for accounting mussel contamination with diarrhoetic shellfish poisoning toxins at Aveiro lagoon: Control by rainfall and atmospheric forcing

NASA Astrophysics Data System (ADS)

Vale, Paulo

2012-02-01

At Aveiro lagoon (Portuguese northwest coast) bivalve contamination with diarrhoetic shellfish poisoning toxins (DSTs), okadaic acid (OA) and dinophysistoxin-2 (DTX2), is a recurrent annual phenomenon seriously affecting seafood safety. The influence of meteorological parameters was studied to understand accumulation of DSTs in mussels, related to the blooming of the causative toxic microalgae, belonging to genus Dinophysis. Two simplified models were useful in predicting the accumulation of DSTs in blue mussels from this lagoon. Either the May river drainage or the rainfall accumulated from January through May could adequately predict the severity of OA accumulated from predation upon Dinophysis acuminata during June/July. In both cases a linear relationship was obtained, with correlation coefficients of 0.85 or greater. Winds with a west direction favour coastal concentration of Dinophysis acuta in Aveiro region. Both OA and DTX2 contamination increased exponentially in September/October with the cumulative number of days with W-wind orientation in the preceding August (correlation coefficients greater than 0.92). This relationship was attributed to the quadratic effect of wind stress on surface currents. August is a transitional month, when the continental runoff effect upon Dinophysis acuminata can still be observed and Dinophysis acuta advection may be promoted by westerly winds occurring in July. The frequency of periods with northerly winds in July can halt accumulation of toxins derived from Dinophysis acuta.

Evidence from data storage tags for the presence of lunar and semilunar behavioral cycles in spawning Atlantic cod

USGS Publications Warehouse

Grabowski, Timothy B.; McAdam, Bruce J.; Thorsteinsson, Vilhjalmur; Marteinsdóttir, Gudrún

2015-01-01

Understanding the environmental processes determining the timing and success of reproduction is of critical importance to developing effective management strategies of marine fishes. Unfortunately it has proven difficult to comprehensively study the reproductive behavior of broadcast-spawning fishes. The use of electronic data storage tags (DSTs) has the potential to provide insights into the behavior of fishes. These tags allow for data collection over relatively large spatial and temporal scales that can be correlated to predicted environmental conditions and ultimately be used to refine predictions of year class strength. In this paper we present data retrieved from DSTs demonstrating that events putatively identified as Atlantic cod spawning behavior is tied to a lunar cycle with a pronounced semi-lunar cycle within it. Peak activity occurs around the full and new moon with no evidence of relationship with day/night cycles.

Simulating Black Carbon and Dust and their Radiative Forcing in Seasonal Snow: A Case Study over North China with Field Campaign Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Chun; Hu, Zhiyuan; Qian, Yun

2014-10-30

A state-of-the-art regional model, WRF-Chem, is coupled with the SNICAR model that includes the sophisticated representation of snow metamorphism processes available for climate study. The coupled model is used to simulate the black carbon (BC) and dust concentrations and their radiative forcing in seasonal snow over North China in January-February of 2010, with extensive field measurements used to evaluate the model performance. In general, the model simulated spatial variability of BC and dust mass concentrations in the top snow layer (hereafter BCS and DSTS, respectively) are quantitatively or qualitatively consistent with observations. The model generally moderately underestimates BCS in themore » clean regions but significantly overestimates BCS in some polluted regions. Most model results fall into the uncertainty ranges of observations. The simulated BCS and DSTS are highest with >5000 ng g-1 and up to 5 mg g-1, respectively, over the source regions and reduce to <50 ng g-1 and <1 μg g-1, respectively, in the remote regions. BCS and DSTS introduce similar magnitude of radiative warming (~10 W m-2) in snowpack, which is comparable to the magnitude of surface radiative cooling due to BC and dust in the atmosphere. This study represents the first effort in using a regional modeling framework to simulate BC and dust and their direct radiative forcing in snow. Although a variety of observational datasets have been used to attribute model biases, some uncertainties in the results remain, which highlights the need for more observations, particularly concurrent measurements of atmospheric and snow aerosols and the deposition fluxes of aerosols, in future campaigns.« less

Double-Shell Tank Visual Inspection Changes Resulting from the Tank 241-AY-102 Primary Tank Leak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girardot, Crystal L.; Washenfelder, Dennis J.; Johnson, Jeremy M.

2013-11-14

As part of the Double-Shell Tank (DST) Integrity Program, remote visual inspections are utilized to perform qualitative in-service inspections of the DSTs in order to provide a general overview of the condition of the tanks. During routine visual inspections of tank 241-AY-102 (AY-102) in August 2012, anomalies were identified on the annulus floor which resulted in further evaluations. In October 2012, Washington River Protection Solutions, LLC determined that the primary tank of AY-102 was leaking. Following identification of the tank AY-102 probable leak cause, evaluations considered the adequacy of the existing annulus inspection frequency with respect to the circumstances ofmore » the tank AY-102 1eak and the advancing age of the DST structures. The evaluations concluded that the interval between annulus inspections should be shortened for all DSTs, and each annulus inspection should cover > 95 percent of annulus floor area, and the portion of the primary tank (i.e., dome, sidewall, lower knuckle, and insulating refractory) that is visible from the annulus inspection risers. In March 2013, enhanced visual inspections were performed for the six oldest tanks: 241-AY-101, 241-AZ-101,241-AZ-102, 241-SY-101, 241-SY-102, and 241-SY-103, and no evidence of leakage from the primary tank were observed. Prior to October 2012, the approach for conducting visual examinations of DSTs was to perform a video examination of each tank's interior and annulus regions approximately every five years (not to exceed seven years between inspections). Also, the annulus inspection only covered about 42 percent of the annulus floor.« less

Full impact of laboratory information system requires direct use by clinical staff: cluster randomized controlled trial.

PubMed

Blaya, Joaquín A; Shin, Sonya; Contreras, Carmen; Yale, Gloria; Suarez, Carmen; Asencios, Luis; Kim, Jihoon; Rodriguez, Pablo; Cegielski, Peter; Fraser, Hamish S F

2011-01-01

To evaluate the time to communicate laboratory results to health centers (HCs) between the e-Chasqui web-based information system and the pre-existing paper-based system. Cluster randomized controlled trial in 78 HCs in Peru. In the intervention group, 12 HCs had web access to results via e-Chasqui (point-of-care HCs) and forwarded results to 17 peripheral HCs. In the control group, 22 point-of-care HCs received paper results directly and forwarded them to 27 peripheral HCs. Baseline data were collected for 15 months. Post-randomization data were collected for at least 2 years. Comparisons were made between intervention and control groups, stratified by point-of-care versus peripheral HCs. For point-of-care HCs, the intervention group took less time to receive drug susceptibility tests (DSTs) (median 9 vs 16 days, p<0.001) and culture results (4 vs 8 days, p<0.001) and had a lower proportion of 'late' DSTs taking >60 days to arrive (p<0.001) than the control. For peripheral HCs, the intervention group had similar communication times for DST (median 22 vs 19 days, p=0.30) and culture (10 vs 9 days, p=0.10) results, as well as proportion of 'late' DSTs (p=0.57) compared with the control. Only point-of-care HCs with direct access to the e-Chasqui information system had reduced communication times and fewer results with delays of >2 months. Peripheral HCs had no benefits from the system. This suggests that health establishments should have point-of-care access to reap the benefits of electronic laboratory reporting.

Full impact of laboratory information system requires direct use by clinical staff: cluster randomized controlled trial

PubMed Central

Shin, Sonya; Contreras, Carmen; Yale, Gloria; Suarez, Carmen; Asencios, Luis; Kim, Jihoon; Rodriguez, Pablo; Cegielski, Peter; Fraser, Hamish S F

2010-01-01

Objective To evaluate the time to communicate laboratory results to health centers (HCs) between the e-Chasqui web-based information system and the pre-existing paper-based system. Methods Cluster randomized controlled trial in 78 HCs in Peru. In the intervention group, 12 HCs had web access to results via e-Chasqui (point-of-care HCs) and forwarded results to 17 peripheral HCs. In the control group, 22 point-of-care HCs received paper results directly and forwarded them to 27 peripheral HCs. Baseline data were collected for 15 months. Post-randomization data were collected for at least 2 years. Comparisons were made between intervention and control groups, stratified by point-of-care versus peripheral HCs. Results For point-of-care HCs, the intervention group took less time to receive drug susceptibility tests (DSTs) (median 9 vs 16 days, p<0.001) and culture results (4 vs 8 days, p<0.001) and had a lower proportion of ‘late’ DSTs taking >60 days to arrive (p<0.001) than the control. For peripheral HCs, the intervention group had similar communication times for DST (median 22 vs 19 days, p=0.30) and culture (10 vs 9 days, p=0.10) results, as well as proportion of ‘late’ DSTs (p=0.57) compared with the control. Conclusions Only point-of-care HCs with direct access to the e-Chasqui information system had reduced communication times and fewer results with delays of >2 months. Peripheral HCs had no benefits from the system. This suggests that health establishments should have point-of-care access to reap the benefits of electronic laboratory reporting. PMID:21113076

242-A Evaporator quality assurance plan. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basra, T.S.

1995-05-04

The purpose of this quality assurance project plan (Plan) is to provide requirements for activities pertaining to sampling, shipping, and analyses associated with candidate feed tank samples for the 242-A Evaporator project. The purpose of the 242-A Evaporator project is to reduce the volume of aqueous waste in the Double Shell Tank (DST) System and will result in considerable savings to the disposal of mixed waste. The 242-A Evaporator feed stream originates from DSTs identified as candidate feed tanks. The 242-A Evaporator reduces the volume of aqueous waste contained in DSTs by boiling off water and sending the condensate (calledmore » process condensate) to the Liquid Effluent Retention Facility (LEPF) storage basin where it is stored prior to treatment in the Effluent Treatment Facility (ETF). The objective of this quality assurance project plan is to provide the planning, implementation, and assessment of sample collection and analysis, data issuance, and validation activities for the candidate feed tanks.« less

Preliminary Design and Evaluation of Portable Electronic Flight Progress Strips

NASA Technical Reports Server (NTRS)

Doble, Nathan A.; Hansman, R. John

2002-01-01

There has been growing interest in using electronic alternatives to the paper Flight Progress Strip (FPS) for air traffic control. However, most research has been centered on radar-based control environments, and has not considered the unique operational needs of the airport air traffic control tower. Based on an analysis of the human factors issues for control tower Decision Support Tool (DST) interfaces, a requirement has been identified for an interaction mechanism which replicates the advantages of the paper FPS (e.g., head-up operation, portability) but also enables input and output with DSTs. An approach has been developed which uses a Portable Electronic FPS that has attributes of both a paper strip and an electronic strip. The prototype flight strip system uses Personal Digital Assistants (PDAs) to replace individual paper strips in addition to a central management interface which is displayed on a desktop computer. Each PDA is connected to the management interface via a wireless local area network. The Portable Electronic FPSs replicate the core functionality of paper flight strips and have additional features which provide a heads-up interface to a DST. A departure DST is used as a motivating example. The central management interface is used for aircraft scheduling and sequencing and provides an overview of airport departure operations. This paper will present the design of the Portable Electronic FPS system as well as preliminary evaluation results.

The Dexamethasone Suppression Test as an Indication of Depression in Patients with Mental Retardation.

ERIC Educational Resources Information Center

Mattes, Jeffrey A.; Amsell, Loren

1993-01-01

Administration of the Dexamethasone Suppression Test (DST) for three groups of institutionalized patients with severe/profound mental retardation found that the 12 depressed patients more frequently (though not significantly) had positive DSTs and significantly higher cortisol levels compared with nondepressed patients with and without other…

Validating a Spanish Developmental Spelling Test.

ERIC Educational Resources Information Center

Ferroli, Lou; Krajenta, Marilyn

The creation and validation of a Spanish version of an English developmental spelling test (DST) is described. An introductory section reviews related literature on the rationale for and construction of DSTs, spelling development in the early grades, and Spanish-English bilingual education. Differences between the English and Spanish test versions…

Damage detection in hazardous waste storage tank bottoms using ultrasonic guided waves

NASA Astrophysics Data System (ADS)

Cobb, Adam C.; Fisher, Jay L.; Bartlett, Jonathan D.; Earnest, Douglas R.

2018-04-01

Detecting damage in storage tanks is performed commercially using a variety of techniques. The most commonly used inspection technologies are magnetic flux leakage (MFL), conventional ultrasonic testing (UT), and leak testing. MFL and UT typically involve manual or robotic scanning of a sensor along the metal surfaces to detect cracks or corrosion wall loss. For inspection of the tank bottom, however, the storage tank is commonly emptied to allow interior access for the inspection system. While there are costs associated with emptying a storage tank for inspection that can be justified in some scenarios, there are situations where emptying the tank is impractical. Robotic, submersible systems have been developed for inspecting these tanks, but there are some storage tanks whose contents are so hazardous that even the use of these systems is untenable. Thus, there is a need to develop an inspection strategy that does not require emptying the tank or insertion of the sensor system into the tank. This paper presents a guided wave system for inspecting the bottom of double-shelled storage tanks (DSTs), with the sensor located on the exterior side-wall of the vessel. The sensor used is an electromagnetic acoustic transducer (EMAT) that generates and receives shear-horizontal guided plate waves using magnetostriction principles. The system operates by scanning the sensor around the circumference of the storage tank and sending guided waves into the tank bottom at regular intervals. The data from multiple locations are combined using the synthetic aperture focusing technique (SAFT) to create a color-mapped image of the vessel thickness changes. The target application of the system described is inspection of DSTs located at the Hanford site, which are million-gallon vessels used to store nuclear waste. Other vessels whose exterior walls are accessible would also be candidates for inspection using the described approach. Experimental results are shown from tests on multiple mockups of the DSTs being used to develop the sensor system.

A national survey of marine biotoxins in wild-caught abalone in Australia.

PubMed

Malhi, Navreet; Turnbull, Alison; Tan, Jessica; Kiermeier, Andreas; Nimmagadda, Rama; McLeod, Catherine

2014-11-01

The first national survey of Australian wild-caught abalone was conducted between September 2012 and December 2013. The aim of the survey was to determine the presence of paralytic shellfish toxins (PSTs), amnesic shellfish toxins (ASTs), and diarrhetic shellfish toxins (DSTs) in wild-caught abalone at levels above the current Codex marine biotoxin limits during the 2013 fishing season. Abalone (n = 190) were collected from 68 abalone-fishing blocks for which the combined annual harvest accounts for 80 % of Australian production. Concurrent seawater samples were collected and enumerated for potentially toxic phytoplankton. The foot and viscera tissues of each abalone sample were analyzed separately for PSTs, ASTs, and DSTs. No samples (abalone foot or viscera) contained toxins at levels exceeding the marine biotoxin limits stipulated by Codex. The resulting prevalence estimate suggests that less than 1.6 % of the commercially caught wild abalone population in Australia were contaminated with marine biotoxins at levels above the regulatory limit during the survey period. ASTs were detected at very low (trace) levels in the foot and viscera tissue of four and three abalone samples, respectively. To our knowledge, this represents the first reported detection of domoic acid in Australian abalone. PSTs also were detected at very low levels in 17 samples of abalone foot tissue and 6 samples of abalone viscera. The association between the low levels of ASTs and PSTs detected in abalone and the presence of potential toxin-producing phytoplankton in seawater samples was weak. DSTs were not detected in any abalone despite the detection of very low levels of DST-producing phytoplankton in a small number (9 of 77) of seawater samples. The results of this survey should be useful for public health risk assessments and provide additional evidence that the prevalence of marine biotoxins in Australian wild-caught abalone is very low.

Reasons for Demotivation across Years of Study: Voices from Iranian English Major Students

ERIC Educational Resources Information Center

Hassaskhah, Jaleh; Mahdavi Zafarghandi, Amir; Fazeli, Maryam

2015-01-01

Language learning failure is often directly related to demotivation. The purpose of this study is to examine the process of demotivation and identify its sources within four years of an undergraduate degree programme. To this end, based on the complex dynamic systems perspective of the dynamic systems theories (DSTs), the demotivation test battery…

Hanford Waste Physical and Rheological Properties: Data and Gaps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wells, Beric E.; Kurath, Dean E.; Mahoney, Lenna A.

2011-08-01

The Hanford Site in Washington State manages 177 underground storage tanks containing approximately 250,000 m3 of waste generated during past defense reprocessing and waste management operations. These tanks contain a mixture of sludge, saltcake and supernatant liquids. The insoluble sludge fraction of the waste consists of metal oxides and hydroxides and contains the bulk of many radionuclides such as the transuranic components and 90Sr. The saltcake, generated by extensive evaporation of aqueous solutions, consists primarily of dried sodium salts. The supernates consist of concentrated (5-15 M) aqueous solutions of sodium and potassium salts. The 177 storage tanks include 149 single-shellmore » tanks (SSTs) and 28 double -hell tanks (DSTs). Ultimately the wastes need to be retrieved from the tanks for treatment and disposal. The SSTs contain minimal amounts of liquid wastes, and the Tank Operations Contractor is continuing a program of moving solid wastes from SSTs to interim storage in the DSTs. The Hanford DST system provides the staging location for waste feed delivery to the Department of Energy (DOE) Office of River Protection’s (ORP) Hanford Tank Waste Treatment and Immobilization Plant (WTP). The WTP is being designed and constructed to pretreat and then vitrify a large portion of the wastes in Hanford’s 177 underground waste storage tanks.« less

Spatial analysis of temperature (BHT/DST) data and consequences for heat-flow determination in sedimentary basins

USGS Publications Warehouse

Forster, A.; Merriam, D.F.; Davis, J.C.

1997-01-01

Large numbers of bottom-hole temperatures (BHTs) and temperatures measured during drill-stem tests (DSTs) are available in areas explored for hydrocarbons, but their usefulness for estimating geothermal gradients and heat-flow density is limited. We investigated a large data set of BHT and DST measurements taken in boreholes in the American Midcontinent, a geologically uniform stable cratonic area, and propose an empirical correction for BHTs based on relationships between BHTs, DSTs, and thermal logs. This empirical correction is compared with similar approaches determined for other areas. The data were analyzed by multivariate statistics prior to the BHT correction to identify anomalous measurements and quantify external influences. Spatial patterns in temperature measurements for major stratigraphic units outline relations to regional structure. Comparision of temperature and structure trend-surface residuals reveals a relationship between temperature highs and local structure highs. The anticlines, developed by continuous but intermittent movement of basement fault blocks in the Late Paleozoic, are subtle features having closures of 10-30 m and contain relatively small hydrocarbon reservoirs. The temperature anomalies of the order of 5-7 ??C may reflect fluids moving upward along fractures and faults, rather than changes in thermal conductivity resulting from different pore fluids. ?? Springer-Verlag 1997.

Spatial analysis of temperature (BHT/DST) data and consequences for heat-flow determination in sedimentary basins

USGS Publications Warehouse

Forster, A.; Merriam, D.F.; Davis, J.C.

1997-01-01

Large numbers of bottom-hole temperatures (BHTs) and temperatures measured during drill-stem tests (DSTs) are available in areas explored for hydrocarbons, but their usefulness for estimating geothermal gradients and heat-flow density is limited. We investigated a large data set of BHT and DST measurements taken in boreholes in the American Midcontinent, a geologically uniform stable cratonic area, and propose an empirical correction for BHTs based on relationships between BHTs, DSTs, and thermal logs. This empirical correction is compared with similar approaches determined for other areas. The data were analyzed by multivariate statistics prior to the BHT correction to identify anomalous measurements and quantify external influences. Spatial patterns in temperature measurements for major stratigraphic units outline relations to regional structure. Comparision of temperature and structure trend-surface residuals reveals a relationship between temperature highs and local structure highs. The anticlines, developed by continuous but intermittent movement of basement fault blocks in the Late Paleozoic, are subtle features having closures of 10-30 m and contain relatively small hydrocarbon reservoirs. The temperature anomalies of the order of 5-7??C may reflect fluids moving upward along fractures and faults, rather than changes in thermal conductivity resulting from different pore fluids.

A rapid culture system uninfluenced by an inoculum effect increases reliability and convenience for drug susceptibility testing of Mycobacterium tuberculosis.

PubMed

Jung, Yong-Gyun; Kim, Hyejin; Lee, Sangyeop; Kim, Suyeoun; Jo, EunJi; Kim, Eun-Geun; Choi, Jungil; Kim, Hyun Jung; Yoo, Jungheon; Lee, Hye-Jeong; Kim, Haeun; Jung, Hyunju; Ryoo, Sungweon; Kwon, Sunghoon

2018-06-05

The Disc Agarose Channel (DAC) system utilizes microfluidics and imaging technologies and is fully automated and capable of tracking single cell growth to produce Mycobacterium tuberculosis (MTB) drug susceptibility testing (DST) results within 3~7 days. In particular, this system can be easily used to perform DSTs without the fastidious preparation of the inoculum of MTB cells. Inoculum effect is one of the major problems that causes DST errors. The DAC system was not influenced by the inoculum effect and produced reliable DST results. In this system, the minimum inhibitory concentration (MIC) values of the first-line drugs were consistent regardless of inoculum sizes ranging from ~10 3 to ~10 8 CFU/mL. The consistent MIC results enabled us to determine the critical concentrations for 12 anti-tuberculosis drugs. Based on the determined critical concentrations, further DSTs were performed with 254 MTB clinical isolates without measuring an inoculum size. There were high agreement rates (96.3%) between the DAC system and the absolute concentration method using Löwenstein-Jensen medium. According to these results, the DAC system is the first DST system that is not affected by the inoculum effect. It can thus increase reliability and convenience for DST of MTB. We expect that this system will be a potential substitute for conventional DST systems.

Spawning behavior in Atlantic cod: analysis by use of data storage tags

USGS Publications Warehouse

Grabowski, Timothy B.; Thorsteinsson, Vilhjalmur; Marteinsdóttir, Gudrún

2014-01-01

 Electronic data storage tags (DSTs) were implanted into Atlantic cod captured in Icelandic waters from 2002 to 2007 and the depth profiles recovered from these tags (females: n = 31, males: n = 27) were used to identify patterns consistent with published descriptions of cod courtship and spawning behavior. The individual periods of time that males spent exhibiting behavior consistent with being present in a spawning aggregation—i.e. periods consisting of a clear tidal signature in the DST depth profile associated with an individual remaining on or near the substrate—were longer than those of females. Over the course of a spawning season, male cod spent approximately twice the amount of time in spawning aggregations than females, but female cod visited more aggregations per unit time. On average, males participated in approximately 57% more putative spawning events, i.e. vertical ascents potentially corresponding to gamete release, than did females. However, males <85 cm total length participated in the same number of putative spawning events as females of comparable size. In both sexes, larger individuals and/or individuals that spent a longer period of time within an aggregation participated in a larger number of putative spawning events. Although further validation and refinement is necessary, particularly in the identification of spawning events, the ability offered by DSTs to quantify cod spawning behavior may aid in the development of management and conservation plans.

Use of AIRS, OMI, MLS, and TES Data in Assessing Forest Ecosystem Exposure to Ozone

NASA Technical Reports Server (NTRS)

Spruce, Joseph P.

2007-01-01

Ground-level ozone at high levels poses health threats to exposed flora and fauna, including negative impacts to human health. While concern is common regarding depletion of ozone in the stratosphere, portions of the urban and rural United States periodically have high ambient levels of tropospheric ozone on the ground. Ozone pollution can cause a variety of impacts to susceptible vegetation (e.g., Ponderosa and Jeffrey pine species in the southwestern United States), such as stunted growth, alteration of growth form, needle or leaf chlorosis, and impaired ability to withstand drought-induced water stress. In addition, Southern Californian forests with high ozone exposures have been recently subject to multiyear droughts that have led to extensive forest overstory mortality from insect outbreaks and increased incidence of wildfires. Residual forests in these impacted areas may be more vulnerable to high ozone exposures and to other forest threats than ever before. NASA sensors collect a wealth of atmospheric data that have been used recently for mapping and monitoring regional tropospheric ozone levels. AIRS (Atmospheric Infrared Sounder), OMI (Ozone Monitoring Instrument), MLS (Microwave Limb Sounder), and TES (Tropospheric Emission Spectrometer) data could be used to assess forest ecosystem exposure to ozone. Such NASA data hold promise for providing better or at least complementary synoptic information on ground-level ozone levels that Federal agency partners can use to assess forest health trends and to mitigate the threats as needed in compliance with Federal laws and mandates. NASA data products on ozone concentrations may be able to aid applications of DSTs (decision support tools) adopted by the USDA FS (U.S. Department of Agriculture Forest Service) and by the NPS (National Park Service), such as the Ozone Calculator, in which ground ozone estimates are employed to assess ozone impacts to forested vegetation.

Using the e-Chasqui, web-based information system, to determine laboratory guidelines and data available to clinical staff.

PubMed

Blaya, Joaquin A; Yagui, Martin; Contreras, Carmen C; Palma, Betty; Shin, Sonya S; Yale, Gloria; Suarez, Carmen; Fraser, Hamish S F

2008-11-06

13% of all drug susceptibility tests (DSTs) performed at a public laboratory in Peru were duplicate. To determine reasons for duplicate requests an online survey was implemented in the e-Chasqui laboratory information system. Results showed that 59.6% of tests were ordered because clinical staff was unaware of ordering guidelines or of a previous result. This shows a benefit of using a web-based system and the lack of laboratory information available to clinical staff in Peru.

Blurred lines: Multiple freshwater and marine algal toxins at the land-sea interface of San Francisco Bay, California

USGS Publications Warehouse

Peacock, Melissa B.; Gibble, Corinne M.; Senn, David B.; Cloern, James E.; Kudela, Raphael M.

2018-01-01

San Francisco Bay (SFB) is a eutrophic estuary that harbors both freshwater and marine toxigenic organisms that are responsible for harmful algal blooms. While there are few commercial fishery harvests within SFB, recreational and subsistence harvesting for shellfish is common. Coastal shellfish are monitored for domoic acid and paralytic shellfish toxins (PSTs), but within SFB there is no routine monitoring for either toxin. Dinophysis shellfish toxins (DSTs) and freshwater microcystins are also present within SFB, but not routinely monitored. Acute exposure to any of these toxin groups has severe consequences for marine organisms and humans, but chronic exposure to sub-lethal doses, or synergistic effects from multiple toxins, are poorly understood and rarely addressed. This study documents the occurrence of domoic acid and microcystins in SFB from 2011 to 2016, and identifies domoic acid, microcystins, DSTs, and PSTs in marine mussels within SFB in 2012, 2014, and 2015. At least one toxin was detected in 99% of mussel samples, and all four toxin suites were identified in 37% of mussels. The presence of these toxins in marine mussels indicates that wildlife and humans who consume them are exposed to toxins at both sub-lethal and acute levels. As such, there are potential deleterious impacts for marine organisms and humans and these effects are unlikely to be documented. These results demonstrate the need for regular monitoring of marine and freshwater toxins in SFB, and suggest that co-occurrence of multiple toxins is a potential threat in other ecosystems where freshwater and seawater mix.

Blurred lines: Multiple freshwater and marine algal toxins at the land-sea interface of San Francisco Bay, California.

PubMed

Peacock, Melissa B; Gibble, Corinne M; Senn, David B; Cloern, James E; Kudela, Raphael M

2018-03-01

San Francisco Bay (SFB) is a eutrophic estuary that harbors both freshwater and marine toxigenic organisms that are responsible for harmful algal blooms. While there are few commercial fishery harvests within SFB, recreational and subsistence harvesting for shellfish is common. Coastal shellfish are monitored for domoic acid and paralytic shellfish toxins (PSTs), but within SFB there is no routine monitoring for either toxin. Dinophysis shellfish toxins (DSTs) and freshwater microcystins are also present within SFB, but not routinely monitored. Acute exposure to any of these toxin groups has severe consequences for marine organisms and humans, but chronic exposure to sub-lethal doses, or synergistic effects from multiple toxins, are poorly understood and rarely addressed. This study documents the occurrence of domoic acid and microcystins in SFB from 2011 to 2016, and identifies domoic acid, microcystins, DSTs, and PSTs in marine mussels within SFB in 2012, 2014, and 2015. At least one toxin was detected in 99% of mussel samples, and all four toxin suites were identified in 37% of mussels. The presence of these toxins in marine mussels indicates that wildlife and humans who consume them are exposed to toxins at both sub-lethal and acute levels. As such, there are potential deleterious impacts for marine organisms and humans and these effects are unlikely to be documented. These results demonstrate the need for regular monitoring of marine and freshwater toxins in SFB, and suggest that co-occurrence of multiple toxins is a potential threat in other ecosystems where freshwater and seawater mix. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Multilocus Sequence Typing Reveals a New Cluster of Closely Related Candida tropicalis Genotypes in Italian Patients With Neurological Disorders.

PubMed

Scordino, Fabio; Giuffrè, Letterio; Barberi, Giuseppina; Marino Merlo, Francesca; Orlando, Maria Grazia; Giosa, Domenico; Romeo, Orazio

2018-01-01

Candida tropicalis is a pathogenic yeast that has emerged as an important cause of candidemia especially in elderly patients with hematological malignancies. Infections caused by this species are mainly reported from Latin America and Asian-Pacific countries although recent epidemiological data revealed that C. tropicalis accounts for 6-16.4% of the Candida bloodstream infections (BSIs) in Italy by representing a relevant issue especially for patients receiving long-term hospital care. The aim of this study was to describe the genetic diversity of C. tropicalis isolates contaminating the hands of healthcare workers (HCWs) and hospital environments and/or associated with BSIs occurring in patients with different neurological disorders and without hematological disease. A total of 28 C. tropicalis isolates were genotyped using multilocus sequence typing analysis of six housekeeping ( ICL1, MDR1, SAPT2, SAPT4, XYR1 , and ZWF1 ) genes and data revealed the presence of only eight diploid sequence types (DSTs) of which 6 (75%) were completely new. Four eBURST clonal complexes (CC2, CC10, CC11, and CC33) contained all DSTs found in this study and the CC33 resulted in an exclusive, well-defined, clonal cluster from Italy. In conclusion, C. tropicalis could represent an important cause of BSIs in long-term hospitalized patients with no underlying hematological disease. The findings of this study also suggest a potential horizontal transmission of a specific C. tropicalis clone through hands of HCWs and expand our understanding of the molecular epidemiology of this pathogen whose population structure is still far from being fully elucidated as its complexity increases as different categories of patients and geographic areas are examined.

Molecular epidemiology of invasive Candida albicans at a tertiary hospital in northern Taiwan from 2003 to 2011.

PubMed

Wang, Shao-Hung; Shen, Mandy; Lin, Hsin-Chieh; Sun, Pei-Lun; Lo, Hsiu-Jung; Lu, Jang-Jih

2015-11-01

Candida albicans is a common cause of bloodstream fungal infections in hospitalized patients. To investigate its epidemiology, multilocus sequence typing (MLST) was performed on 285 C. albicans bloodstream isolates from patients in Chang Gung Memorial Hospital at Linkou (CGMHL), Taiwan from 2003 to 2011. Among these isolates, the three major diploid sequence types (DSTs) were 693, 659, and 443 with 19, 16, and 13 isolates, respectively. The 179 DSTs were classified into 16 clades by unweighted pair-group method using arithmetic averages (UPGMA). The major ones were clades 1, 4, 3, and 17 (54, 49, 31, and 31 isolates, respectively). Further analyses with eBURST clustered the 285 isolates into 28 clonal complexes (CC). The most common complexes were CC8, CC20, and CC9. DST 693 that had the highest number of isolates was determined to be the cluster founder of CC20, which belonged to clade 3. So far, 33 isolates worldwide including 29 from Taiwan and 4 from Korea, are CC20, suggesting that CC20 is an Asian cluster. Two fluconazole-resistant isolates belonging to CC12 and CC19 were detected. All other CGMHL isolates were susceptible to 5-flucytosine, amphotericin B, anidulfungin, caspofungin, fluconazole, itraconazole, micafungin, posaconazole, and voriconazole. However, CC20 isolates exhibited significantly lower susceptibility to fluconazole. In conclusion, the 285 CGMHL C. albicans isolates displayed geographically clustering with Asian isolates, and most of them are susceptible to common antifungal drugs. Isolates of DST 693, a Taiwanese major genotype belonging to MLST clade 3, were more resistant to fluconazole than other isolates. © The Author 2015. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

State waste discharge permit application for the 200 Area Effluent Treatment Facility and the State-Approved Land Disposal Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-08-01

Application is being made for a permit pursuant to Chapter 173--216 of the Washington Administrative Code (WAC), to discharge treated waste water and cooling tower blowdown from the 200 Area Effluent Treatment Facility (ETF) to land at the State-Approved Land Disposal Site (SALDS). The ETF is located in the 200 East Area and the SALDS is located north of the 200 West Area. The ETF is an industrial waste water treatment plant that will initially receive waste water from the following two sources, both located in the 200 Area on the Hanford Site: (1) the Liquid Effluent Retention Facility (LERF)more » and (2) the 242-A Evaporator. The waste water discharged from these two facilities is process condensate (PC), a by-product of the concentration of waste from DSTs that is performed in the 242-A Evaporator. Because the ETF is designed as a flexible treatment system, other aqueous waste streams generated at the Hanford Site may be considered for treatment at the ETF. The origin of the waste currently contained in the DSTs is explained in Section 2.0. An overview of the concentration of these waste in the 242-A Evaporator is provided in Section 3.0. Section 4.0 describes the LERF, a storage facility for process condensate. Attachment A responds to Section B of the permit application and provides an overview of the processes that generated the wastes, storage of the wastes in double-shell tanks (DST), preliminary treatment in the 242-A Evaporator, and storage at the LERF. Attachment B addresses waste water treatment at the ETF (under construction) and the addition of cooling tower blowdown to the treated waste water prior to disposal at SALDS. Attachment C describes treated waste water disposal at the proposed SALDS.« less

Hanford Double-Shell Tank Inspection Annual Report Calendar Year 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petermann, Tasha M.; Boomer, Kayle D.; Washenfelder, D. J.

2013-12-02

The double-shell tanks (DSTs) were constructed between 1968 and 1986. They will have exceeded their design life before the waste can be removed and trasferred to the Waste Treatment and Immobilization Plant for vitrification. The Double-Shell Tank Integrity Project has been established to evaluate tank aging, and ensure that each tank is structurally sound for continued use. This is the first issue of the Double-Shell Tank Inspection Annual Report. The purpose of this issue is to summarize the results of DST inspections conducted from the beginnng of the inspection program through the end of CY2012. Hereafter, the report will bemore » updated annually with summaries of the past year's DST inspection activities.« less

Time Relevance of Convective Weather Forecast for Air Traffic Automation

NASA Technical Reports Server (NTRS)

Chan, William N.

2006-01-01

The Federal Aviation Administration (FAA) is handling nearly 120,000 flights a day through its Air Traffic Management (ATM) system and air traffic congestion is expected to increse substantially over the next 20 years. Weather-induced impacts to throughput and efficiency are the leading cause of flight delays accounting for 70% of all delays with convective weather accounting for 60% of all weather related delays. To support the Next Generation Air Traffic System goal of operating at 3X current capacity in the NAS, ATC decision support tools are being developed to create advisories to assist controllers in all weather constraints. Initial development of these decision support tools did not integrate information regarding weather constraints such as thunderstorms and relied on an additional system to provide that information. Future Decision Support Tools should move towards an integrated system where weather constraints are factored into the advisory of a Decision Support Tool (DST). Several groups such at NASA-Ames, Lincoln Laboratories, and MITRE are integrating convective weather data with DSTs. A survey of current convective weather forecast and observation data show they span a wide range of temporal and spatial resolutions. Short range convective observations can be obtained every 5 mins with longer range forecasts out to several days updated every 6 hrs. Today, the short range forecasts of less than 2 hours have a temporal resolution of 5 mins. Beyond 2 hours, forecasts have much lower temporal. resolution of typically 1 hour. Spatial resolutions vary from 1km for short range to 40km for longer range forecasts. Improving the accuracy of long range convective forecasts is a major challenge. A report published by the National Research Council states improvements for convective forecasts for the 2 to 6 hour time frame will only be achieved for a limited set of convective phenomena in the next 5 to 10 years. Improved longer range forecasts will be probabilistic as opposed to the deterministic shorter range forecasts. Despite the known low level of confidence with respect to long range convective forecasts, these data are still useful to a DST routing algorithm. It is better to develop an aircraft route using the best information available than no information. The temporally coarse long range forecast data needs to be interpolated to be useful to a DST. A DST uses aircraft trajectory predictions that need to be evaluated for impacts by convective storms. Each time-step of a trajectory prediction n&s to be checked against weather data. For the case of coarse temporal data, there needs to be a method fill in weather data where there is none. Simply using the coarse weather data without any interpolation can result in DST routes that are impacted by regions of strong convection. Increasing the temporal resolution of these data can be achieved but result in a large dataset that may prove to be an operational challenge in transmission and loading by a DST. Currently, it takes about 7mins retrieve a 7mb RUC2 forecast file from NOAA at NASA-Ames Research Center. A prototype NCWF6 1 hour forecast is about 3mb in size. A Six hour NCWFG forecast with a 1hr forecast time-step will be about l8mb (6 x 3mb). A 6 hour NCWF6 forecast with a l5min forecast time-step will be about 7mb (24 x 3mb). Based on the time it takes to retrieve a 7mb RUC2 forecast, it will take approximately 70mins to retrieve a 6 hour NCWF forecast with 15min time steps. Until those issues are addressed, there is a need to develop an algorithm that interpolates between these temporally coarse long range forecasts. This paper describes a method of how to use low temporal resolution probabilistic weather forecasts in a DST. The beginning of this paper is a description of some convective weather forecast and observation products followed by an example of how weather data are used by a DST. The subsequent sections will describe probabilistic forecasts followed by a descrtion of a method to use low temporal resolution probabilistic weather forecasts by providing a relevance value to these data outside of their valid times.

Applying Hanford Tank Mixing Data to Define Pulse Jet Mixer Operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wells, Beric E.; Bamberger, Judith A.; Recknagle, Kurtis P.

Pulse jet mixed (PJM) process vessels are being developed for storing, blending, and chemical processing of nuclear waste slurries at the Waste Treatment and Immobilization Plant (WTP) to be built at Hanford, Washington. These waste slurries exhibit variable process feed characteristics including Newtonian to non-Newtonian rheologies over a range of solids loadings. Waste feed to the WTP from the Hanford Tank Farms will be accomplished via the Waste Feed Delivery (WFD) system which includes million-gallon underground storage double-shell tanks (DSTs) with dual-opposed jet mixer pumps. Experience using WFD type jet mixer pumps to mobilize actual Hanford waste in DSTs maymore » be used to establish design threshold criteria of interest to pulse jet mixed process vessel operation. This paper describes a method to evaluate the pulse jet mixed vessel capability to process waste based on information obtained during mobilizing and suspending waste by the WFD system jet mixer pumps in a DST. Calculations of jet velocity and wall shear stress in a specific pulse jet mixed process vessel were performed using a commercial computational fluid dynamics (CFD) code. The CFD-modelled process vessel consists of a 4.9-m- (16-ft-) diameter tank with a 2:1 semi-elliptical head, a single, 10-cm (4-in.) downward facing 60-degree conical nozzle, and a 0.61-m (24-in.) inside diameter PJM. The PJM is located at 70% of the vessel radius with the nozzle stand-off-distance 14 cm (6 in.) above the vessel head. The CFD modeled fluid velocity and wall shear stress can be used to estimate vessel waste-processing performance by comparison to available actual WFD system process data. Test data from the operation of jet mixer pumps in the 23-m (75-ft) diameter DSTs have demonstrated mobilization, solid particles in a sediment matrix were moved from their initial location, and suspension, mobilized solid particles were moved to a higher elevation in the vessel than their initial location, of waste solids. Jet mixer pumps were used in Hanford waste tank 241-AZ-101, and at least 95% of the 0.46-m (18-in.) deep sediment, with a shear strength of 1,500 to 4,200 Pa, was mobilized. Solids with a median particle size of 43 μm, 90th percentile of 94μm, were suspended in tank 241-AZ-101 to at least 5.5 m (216 in.) above the vessel bottom. Analytical calculations for this jet mixer pump test were used to estimate the velocities and wall shear stress that mobilized and suspended the waste. These velocities and wall shear stresses provide design threshold criteria which are metrics for system performance that can be evaluated via testing. If the fluid motion in a specific pulse jet mixed process vessel meets or exceeds the fluid motion of the demonstrated performance in the WFD system, confidence is provided that that vessel will similarly mobilize and suspend those solids if they were within the WTP. The single PJM CFD-calculated jet velocity and wall shear stress compare favorably with the design threshold criterion estimated for the tank 241-AZ-101 process data. Therefore, for both mobilization and suspension, the performance data evaluated from the WFD system testing increases confidence that the performance of the pulse jet mixed process vessels will be sufficient to process that waste even if that waste is not fully characterized.« less

Evaluating spawning migration patterns and predicting spawning success of shovelnose sturgeon in the Lower Missouri River

USGS Publications Warehouse

Wildhaber, M.L.; Holan, S.H.; Davis, G.M.; Gladish, D.W.; DeLonay, A.J.; Papoulias, D.M.; Sommerhauser, D.K.

2011-01-01

Approaches using telemetry, precise reproductive assessments, and surgically implanted data storage tags (DSTs) were used in combination with novel applications of analytical techniques for fish movement studies to describe patterns in migratory behavior and predict spawning success of gravid shovelnose sturgeon. From 2004 to 2007, over 300 gravid female shovelnose sturgeon (Scaphirhynchus platorynchus) from the Lower Missouri River, that were expected to spawn in the year they were collected, were surgically implanted with transmitters and archival DSTs. Functional cluster modeling of telemetry data from the spawning season suggested two common migration patterns of gravid female shovelnose sturgeon. Fish implanted from 958 to 1181 river kilometer (rkm) from the mouth of the Missouri River (or northern portion of the Lower Missouri River within 354rkm of the lowest Missouri River dam at rkm 1305) had one migration pattern. Of fish implanted from 209 to 402rkm from the mouth of the Missouri River (or southern portion of the Lower Missouri River), half demonstrated a movement pattern similar to the northern fish while the other half demonstrated a migration pattern that covered more of the river. There was no apparent difference in migration patterns between successful and unsuccessful spawners. Multiple hypotheses exist to explain differences in migratory patterns among fish from different river reaches. Additional work is required to determine if observed differences are due to multiple adapted strategies, environmental alteration, and/or initial tagging date. Hierarchical Bayesian modeling of DST data indicated that variation in depth usage patterns was consistently different between successful and unsuccessful spawners, as indicated by differences in likelihood of switching between high and low variability states. Analyses of DST data, and data collected at capture, were sufficient to predict 8 of 10 non-spawners/incomplete spawners and all 30 spawners in the absence of telemetry location data. Together, the results of these two separate analyses suggest that caution is necessary in extrapolating spawning success from broad-scale movement data alone. More direct measures of spawning success may be necessary to precisely determine spawning success and to evaluate the effects of management actions. ?? 2011 Blackwell Verlag, Berlin.

Emergence of a few distinct structures from a single formal structure type during high-throughput screening for stable compounds: The case of RbCuS and RbCuSe

NASA Astrophysics Data System (ADS)

Trimarchi, Giancarlo; Zhang, Xiuwen; DeVries Vermeer, Michael J.; Cantwell, Jacqueline; Poeppelmeier, Kenneth R.; Zunger, Alex

2015-10-01

Theoretical sorting of stable and synthesizable "missing compounds" from those that are unstable is a crucial step in the discovery of previously unknown functional materials. This active research area often involves high-throughput (HT) examination of the total energy of a given compound in a list of candidate formal structure types (FSTs), searching for those with the lowest energy within that list. While it is well appreciated that local relaxation methods based on a fixed list of structure types can lead to inaccurate geometries, this approach is widely used in HT studies because it produces answers faster than global optimization methods (that vary lattice vectors and atomic positions without local restrictions). We find, however, a different failure mode of the HT protocol: specific crystallographic classes of formal structure types each correspond to a series of chemically distinct "daughter structure types" (DSTs) that have the same space group but possess totally different local bonding configurations, including coordination types. Failure to include such DSTs in the fixed list of examined candidate structures used in contemporary high-throughput approaches can lead to qualitative misidentification of the stable bonding pattern, not just quantitative inaccuracies. In this work, we (i) clarify the understanding of the general DST-FST relationship, thus improving current discovery HT approaches, (ii) illustrate this failure mode for RbCuS and RbCuSe (the latter being a yet unreported compound and is predicted here) by developing a synthesis method and accelerated crystal-structure determination, and (iii) apply the genetic-algorithm-based global space-group optimization (GSGO) approach which is not vulnerable to the failure mode of HT searches of fixed lists, demonstrating a correct identification of the stable DST. The broad impact of items (i)-(iii) lies in the demonstrated predictive ability of a more comprehensive search strategy than what is currently used—use HT calculations as the preliminary broad screening followed by unbiased GSGO of the final candidates.

Evaluating spawning migration patterns and predicting spawning success of shovelnose sturgeon in the Lower Missouri River

USGS Publications Warehouse

Wildhaber, M.L.; Holan, S.H.; Davis, G.M.; Gladish, D.W.; DeLonay, A.J.; Papoulias, D.M.; Sommerhauser, D.K.

2011-01-01

Approaches using telemetry, precise reproductive assessments, and surgically implanted data storage tags (DSTs) were used in combination with novel applications of analytical techniques for fish movement studies to describe patterns in migratory behavior and predict spawning success of gravid shovelnose sturgeon. From 2004 to 2007, over 300 gravid female shovelnose sturgeon (Scaphirhynchus platorynchus) from the Lower Missouri River, that were expected to spawn in the year they were collected, were surgically implanted with transmitters and archival DSTs. Functional cluster modeling of telemetry data from the spawning season suggested two common migration patterns of gravid female shovelnose sturgeon. Fish implanted from 958 to 1181 river kilometer (rkm) from the mouth of the Missouri River (or northern portion of the Lower Missouri River within 354 rkm of the lowest Missouri River dam at rkm 1305) had one migration pattern. Of fish implanted from 209 to 402 rkm from the mouth of the Missouri River (or southern portion of the Lower Missouri River), half demonstrated a movement pattern similar to the northern fish while the other half demonstrated a migration pattern that covered more of the river. There was no apparent difference in migration patterns between successful and unsuccessful spawners. Multiple hypotheses exist to explain differences in migratory patterns among fish from different river reaches. Additional work is required to determine if observed differences are due to multiple adapted strategies, environmental alteration, and/or initial tagging date. Hierarchical Bayesian modeling of DST data indicated that variation in depth usage patterns was consistently different between successful and unsuccessful spawners, as indicated by differences in likelihood of switching between high and low variability states. Analyses of DST data, and data collected at capture, were sufficient to predict 8 of 10 non-spawners/incomplete spawners and all 30 spawners in the absence of telemetry location data. Together, the results of these two separate analyses suggest that caution is necessary in extrapolating spawning success from broad-scale movement data alone. More direct measures of spawning success may be necessary to precisely determine spawning success and to evaluate the effects of management actions.

Interim Basis for PCB Sampling and Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

BANNING, D.L.

2001-01-18

This document was developed as an interim basis for sampling and analysis of polychlorinated biphenyls (PCBs) and will be used until a formal data quality objective (DQO) document is prepared and approved. On August 31, 2000, the Framework Agreement for Management of Polychlorinated Biphenyls (PCBs) in Hanford Tank Waste was signed by the US. Department of Energy (DOE), the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology) (Ecology et al. 2000). This agreement outlines the management of double shell tank (DST) waste as Toxic Substance Control Act (TSCA) PCB remediation waste based on a risk-based disposalmore » approval option per Title 40 of the Code of Federal Regulations 761.61 (c). The agreement calls for ''Quantification of PCBs in DSTs, single shell tanks (SSTs), and incoming waste to ensure that the vitrification plant and other ancillary facilities PCB waste acceptance limits and the requirements of the anticipated risk-based disposal approval are met.'' Waste samples will be analyzed for PCBs to satisfy this requirement. This document describes the DQO process undertaken to assure appropriate data will be collected to support management of PCBs and is presented in a DQO format. The DQO process was implemented in accordance with the U.S. Environmental Protection Agency EPA QAlG4, Guidance for the Data Quality Objectives Process (EPA 1994) and the Data Quality Objectives for Sampling and Analyses, HNF-IP-0842, Rev. 1 A, Vol. IV, Section 4.16 (Banning 1999).« less

Interim Basis for PCB Sampling and Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

BANNING, D.L.

2001-03-20

This document was developed as an interim basis for sampling and analysis of polychlorinated biphenyls (PCBs) and will be used until a formal data quality objective (DQO) document is prepared and approved. On August 31, 2000, the Framework Agreement for Management of Polychlorinated Biphenyls (PCBs) in Hanford Tank Waste was signed by the U.S. Department of Energy (DOE), the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology) (Ecology et al. 2000). This agreement outlines the management of double shell tank (DST) waste as Toxic Substance Control Act (TSCA) PCB remediation waste based on a risk-based disposalmore » approval option per Title 40 of the Code of Federal Regulations 761.61 (c). The agreement calls for ''Quantification of PCBs in DSTs, single shell tanks (SSTs), and incoming waste to ensure that the vitrification plant and other ancillary facilities PCB waste acceptance limits and the requirements of the anticipated risk-based disposal approval are met.'' Waste samples will be analyzed for PCBs to satisfy this requirement. This document describes the DQO process undertaken to assure appropriate data will be collected to support management of PCBs and is presented in a DQO format. The DQO process was implemented in accordance with the U.S. Environmental Protection Agency EPA QA/G4, Guidance for the Data Quality Objectives Process (EPA 1994) and the Data Quality Objectives for Sampling and Analyses, HNF-IP-0842, Rev. 1A, Vol. IV, Section 4.16 (Banning 1999).« less

Progress in Hanford's Double-Shell Tank Integrity Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryson, D.C.; Washenfelder, D.J.; Boomer, K.D.

2008-07-01

The U.S. Department of Energy's Office of River Protection has an extensive integrity assessment program for the Hanford Site Double-Shell Tank System. The DOE Orders and environmental protection regulations provide the guidelines for the activities used to inspect and maintain 28 double-shell tanks (DSTs), the waste evaporator, and ancillary equipment that compose this system. This program has been reviewed by oversight and regulatory bodies and found to comply with the established guidelines. The basis for the DOE Order 435.1-1 for tank integrity comes from the Tank Structural Integrity Panel led by Brookhaven National Laboratory during the late 1990's. These guidelinesmore » established criteria for performing Non-Destructive Examination (NDE), for acceptance of the NDE results, for waste chemistry control, and for monitoring the tanks. The environmental regulations mirror these requirements and allow for the tank integrity program to provide compliant storage of the tanks. Both sets of requirements provide additional guidance for the protection of ancillary equipment. CH2M HILL uses two methods of NDE: visual inspection and Ultrasonic Testing (UT). The visual inspection program examines the primary tank and secondary liner of the DST. The primary tank is examined both on the interior surface above the waste in the tank and on the exterior surface facing the annulus of the DST. The interior surface of the tank liner is examined at the same time as the outer surface of the primary tank. The UT program examines representative areas of the primary tank and secondary liner by deploying equipment in the annulus of the tank. Both programs have led to the development of new equipment for remote inspection of the tanks. Compact camera and enhanced lighting systems have been designed and deployed through narrow access ports (called risers) into the tanks. The UT program has designed two generations of crawlers and equipment for deployment through risers into the thermally hot and radioactive environment. Also extensions were developed to allow inspection of the tank's curve upper (haunch) and lower (knuckle) surfaces. CH2M HILL primarily maintains chemistry control of the DST by ensuring that the concentrations of hydroxide and nitrite ions are favorable with respect to the nitrate ion concentration in the waste. This control program is supported by an extensive sampling program that obtains samples from the supernatant and solid layers in the tank to ensure compliance with the chemical specification. At DOE direction, CH2M HILL has embarked on a waste chemistry optimization program to enhance the protection of the tank surface and the understanding of the parameters that affect general and localized corrosion in the tanks. Over the past decade, DOE has deployed Electrochemical Noise corrosion probes in the DST to monitor localized corrosion. From the information gathered as part of the chemistry control, new information has been identified about the parameters requiring control to ensure tank integrity. CH2M HILL is deploying a series of corrosion probes to test and employ these parameters to provide real time corrosion monitoring of the DSTs. (authors)« less

Corrosion probe. Innovative technology summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Over 253 million liters of high-level waste (HLW) generated from plutonium production is stored in mild steel tanks at the Department of Energy (DOE) Hanford Site. Corrosion monitoring of double-shell storage tanks (DSTs) is currently performed at Hanford using a combination of process knowledge and tank waste sampling and analysis. Available technologies for corrosion monitoring have progressed to a point where it is feasible to monitor and control corrosion by on-line monitoring of the corrosion process and direct addition of corrosion inhibitors. The electrochemical noise (EN) technique deploys EN-based corrosion monitoring probes into storage tanks. This system is specifically designedmore » to measure corrosion rates and detect changes in waste chemistry that trigger the onset of pitting and cracking. These on-line probes can determine whether additional corrosion inhibitor is required and, if so, provide information on an effective end point to the corrosion inhibitor addition procedure. This report describes the technology, its performance, its application, costs, regulatory and policy issues, and lessons learned.« less

Models of Sector Flows Under Local, Regional and Airport Weather Constraints

NASA Technical Reports Server (NTRS)

Kulkarni, Deepak

2017-01-01

Recently, the ATM community has made important progress in collaborative trajectory management through the introduction of a new FAA traffic management initiative called a Collaborative Trajectory Options Program (CTOP). FAA can use CTOPs to manage air traffic under multiple constraints (manifested as flow constrained areas or FCAs) in the system, and it allows flight operators to indicate their preferences for routing and delay options. CTOPs also permits better management of the overall trajectory of flights by considering both routing and departure delay options simultaneously. However, adoption of CTOPs in airspace has been hampered by many factors that include challenges in how to identify constrained areas and how to set rates for the FCAs. Decision support tools providing assistance would be particularly helpful in effective use of CTOPs. Such DSTs tools would need models of demand and capacity in the presence of multiple constraints. This study examines different approaches to using historical data to create and validate models of maximum flows in sectors and other airspace regions in the presence of multiple constraints. A challenge in creating an empirical model of flows under multiple constraints is a lack of sufficient historical data that captures diverse situations involving combinations of multiple constraints especially those with severe weather. The approach taken here to deal with this is two-fold. First, we create a generalized sector model encompassing multiple sectors rather than individual sectors in order to increase the amount of data used for creating the model by an order of magnitude. Secondly, we decompose the problem so that the amount of data needed is reduced. This involves creating a baseline demand model plus a separate weather constrained flow reduction model and then composing these into a single integrated model. A nominal demand model is a flow model (gdem) in the presence of clear local weather. This defines the flow as a function of weather constraints in neighboring regions, airport constraints and weather in locations that can cause re-routes to the location of interest. A weather constrained flow reduction model (fwx-red) is a model of reduction in baseline counts as a function of local weather. Because the number of independent variables associated with each of the two decomposed models is smaller than that with a single model, need for amount of data is reduced. Finally, a composite model that combines these two can be represented as fwx-red (gdem(e), l) where e represents non-local constraints and l represents local weather. The approaches studied to developing these models are divided into three categories: (1) Point estimation models (2) Empirical models (3) Theoretical models. Errors in predictions of these different types of models have been estimated. In situations when there is abundant data, point estimation models tend to be very accurate. In contrast, empirical models do better than theoretical models when there is some data available. The biggest benefit of theoretical models is their general applicability in wider range situations once the degree of accuracy of these has been established.

Models of Sector Aircraft Counts in the Presence of Local, Regional and Airport Constraints

NASA Technical Reports Server (NTRS)

Kulkarni, Deepak

2017-01-01

Recently, the ATM community has made important progress in collaborative trajectory management through the introduction of a new FAA traffic management initiative called a Collaborative Trajectory Options Program (CTOP). FAA can use CTOPs to manage air traffic under multiple constraints (manifested as flow constrained areas or FCAs) in the system, and it allows flight operators to indicate their preferences for routing and delay options. CTOPs also permits better management of the overall trajectory of flights by considering both routing and departure delay options simultaneously. However, adoption of CTOPs in airspace has been hampered by many factors that include challenges in how to identify constrained areas and how to set rates for the FCAs. Decision support tools providing assistance would be particularly helpful in effective use of CTOPs. Such DSTs tools would need models of demand and capacity in the presence of multiple constraints. This study examines different approaches to using historical data to create and validate models of maximum flows in sectors and other airspace regions in the presence of multiple constraints. A challenge in creating an empirical model of flows under multiple constraints is a lack of sufficient historical data that captures diverse situations involving combinations of multiple constraints especially those with severe weather. The approach taken here to deal with this is two-fold. First, we create a generalized sector model encompassing multiple sectors rather than individual sectors in order to increase the amount of data used for creating the model by an order of magnitude. Secondly, we decompose the problem so that the amount of data needed is reduced. This involves creating a baseline demand model plus a separate weather constrained flow reduction model and then composing these into a single integrated model. A nominal demand model is a flow model (gdem) in the presence of clear local weather. This defines the flow as a function of weather constraints in neighboring regions, airport constraints and weather in locations that can cause re-routes to the location of interest. A weather constrained flow reduction model (fwx-red) is a model of reduction in baseline counts as a function of local weather. Because the number of independent variables associated with each of the two decomposed models is smaller than that with a single model, need for amount of data is reduced. Finally, a composite model that combines these two can be represented as fwx-red (gdem(e), l) where e represents non-local constraints and l represents local weather. The approaches studied to developing these models are divided into three categories: (1) Point estimation models (2) Empirical models (3) Theoretical models. Errors in predictions of these different types of models have been estimated. In situations when there is abundant data, point estimation models tend to be very accurate. In contrast, empirical models do better than theoretical models when there is some data available. The biggest benefit of theoretical models is their general applicability in wider range situations once the degree of accuracy of these has been established.

Overview of EPA tools for supporting local-, state- and regional-level decision makers addressing energy and environmental issues: NYC MARKAL Energy Systems Model and Municipal Solid Waste Decision Support Tool

EPA Science Inventory

A workshop will be conducted to demonstrate and focus on two decision support tools developed at EPA/ORD: 1. Community-scale MARKAL model: an energy-water technology evaluation tool and 2. Municipal Solid Waste Decision Support Tool (MSW DST). The Workshop will be part of Southea...

Performance evaluation of rotating pump jet mixing of radioactive wastes in Hanford Tanks 241-AP-102 and -104

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onishi, Y.; Recknagle, K.P.

The purpose of this study was to confirm the adequacy of a single mixer pump to fully mix the wastes that will be stored in Tanks 241-AP-102 and -104. These Hanford double-shell tanks (DSTs) will be used as staging tanks to receive low-activity wastes from other Hanford storage tanks and, in turn, will supply the wastes to private waste vitrification facilities for eventual solidification. The TEMPEST computer code was applied to Tanks AP-102 and -104 to simulate waste mixing generated by the 60-ft/s rotating jets and to determine the effectiveness of the single rotating pump to mix the waste. TEMPESTmore » simulates flow and mass/heat transport and chemical reactions (equilibrium and kinetic reactions) coupled together. Section 2 describes the pump jet mixing conditions the authors evaluated, the modeling cases, and their parameters. Section 3 reports model applications and assessment results. The summary and conclusions are presented in Section 4, and cited references are listed in Section 5.« less

The role of the Carer Support Needs Assessment Tool in palliative home care: A qualitative study of practitioners' perspectives of its impact and mechanisms of action.

PubMed

Ewing, Gail; Austin, Lynn; Grande, Gunn

2016-04-01

The importance of supporting family carers is well recognised in healthcare policy. The Carer Support Needs Assessment Tool is an evidence-based, comprehensive measure of carer support needs to facilitate carer support in palliative home care. To examine practitioner perspectives of the role of the Carer Support Needs Assessment Tool intervention in palliative home care to identify its impact and mechanisms of action. Qualitative - practitioner accounts of implementation (interviews, focus groups, reflective audio diaries) plus researcher field notes. A total of 29 staff members from two hospice home-care services - contrasting geographical locations, different service sizes and staff composition. A thematic analysis was conducted. Existing approaches to identification of carer needs were informal and unstructured. Practitioners expressed some concerns, pre-implementation, about negative impacts of the Carer Support Needs Assessment Tool on carers and expectations raised about support available. In contrast, post-implementation, the Carer Support Needs Assessment Tool provided positive impacts when used as part of a carer-led assessment and support process: it made support needs visible, legitimised support for carers and opened up different conversations with carers. The mechanisms of action that enabled the Carer Support Needs Assessment Tool to make a difference were creating space for the separate needs of carers, providing an opportunity for carers to express support needs and responding to carers' self-defined priorities. The Carer Support Needs Assessment Tool delivered benefits through a change in practice to an identifiable, separate assessment process for carers, facilitated by practitioners but carer-led. Used routinely with all carers, the Carer Support Needs Assessment Tool has the potential to normalise carer assessment and support, facilitate delivery of carer-identified support and enable effective targeting of resources. © The Author(s) 2015.

Performance Support Tools: Delivering Value when and where It Is Needed

ERIC Educational Resources Information Center

McManus, Paul; Rossett, Allison

2006-01-01

Some call them Electronic Performance Support Systems (EPSSs). Others prefer Performance Support Tools (PSTs) or decision support tools. One might call EPSSs or PSTs job aids on steroids, technological tools that provide critical information or advice needed to move forward at a particular moment in time. Characteristic advantages of an EPSS or a…

An end user evaluation of query formulation and results review tools in three medical meta-search engines.

PubMed

Leroy, Gondy; Xu, Jennifer; Chung, Wingyan; Eggers, Shauna; Chen, Hsinchun

2007-01-01

Retrieving sufficient relevant information online is difficult for many people because they use too few keywords to search and search engines do not provide many support tools. To further complicate the search, users often ignore support tools when available. Our goal is to evaluate in a realistic setting when users use support tools and how they perceive these tools. We compared three medical search engines with support tools that require more or less effort from users to form a query and evaluate results. We carried out an end user study with 23 users who were asked to find information, i.e., subtopics and supporting abstracts, for a given theme. We used a balanced within-subjects design and report on the effectiveness, efficiency and usability of the support tools from the end user perspective. We found significant differences in efficiency but did not find significant differences in effectiveness between the three search engines. Dynamic user support tools requiring less effort led to higher efficiency. Fewer searches were needed and more documents were found per search when both query reformulation and result review tools dynamically adjust to the user query. The query reformulation tool that provided a long list of keywords, dynamically adjusted to the user query, was used most often and led to more subtopics. As hypothesized, the dynamic result review tools were used more often and led to more subtopics than static ones. These results were corroborated by the usability questionnaires, which showed that support tools that dynamically optimize output were preferred.

Case and Administrative Support Tools

EPA Pesticide Factsheets

Case and Administrative Support Tools (CAST) is the secure portion of the Office of General Counsel (OGC) Dashboard business process automation tool used to help reduce office administrative labor costs while increasing employee effectiveness. CAST supports business functions which rely on and store Privacy Act sensitive data (PII). Specific business processes included in CAST (and respective PII) are: -Civil Rights Cast Tracking (name, partial medical history, summary of case, and case correspondance). -Employment Law Case Tracking (name, summary of case). -Federal Tort Claims Act Incident Tracking (name, summary of incidents). -Ethics Program Support Tools and Tracking (name, partial financial history). -Summer Honors Application Tracking (name, home address, telephone number, employment history). -Workforce Flexibility Initiative Support Tools (name, alternative workplace phone number). -Resource and Personnel Management Support Tools (name, partial employment and financial history).

Employing Cognitive Tools within Interactive Multimedia Applications.

ERIC Educational Resources Information Center

Hedberg, John; And Others

This paper describes research into the use of cognitive tools in the classroom using "Exploring the Nardoo", an information landscape designed to support student investigation. Simulations and support tools which allow multimedia reporting are embedded in the package and are supported by several metacognitive tools for the writing…

Students' Use of Electronic Support Tools in Mathematics

ERIC Educational Resources Information Center

Crawford, Lindy; Higgins, Kristina N.; Huscroft-D'Angelo, Jacqueline N.; Hall, Lindsay

2016-01-01

This study investigated students' use of electronic support tools within a computer-based mathematics program. Electronic support tools are tools, such as hyperlinks or calculators, available within many computer-based instructional programs. A convenience sample of 73 students in grades 4-6 was selected to participate in the study. Students…

Decision Support for Resilient Communities: EPA’s Watershed Management Optimization Support Tool

EPA Science Inventory

The U.S. EPA Atlantic Ecology Division is releasing version 3 of the Watershed Management Optimization Support Tool (WMOST v3) in February 2018. WMOST is a decision-support tool that facilitates integrated water resources management (IWRM) by communities and watershed organizati...

Graphite fiber reinforced structure for supporting machine tools

DOEpatents

Knight, Jr., Charles E.; Kovach, Louis; Hurst, John S.

1978-01-01

Machine tools utilized in precision machine operations require tool support structures which exhibit minimal deflection, thermal expansion and vibration characteristics. The tool support structure of the present invention is a graphite fiber reinforced composite in which layers of the graphite fibers or yarn are disposed in a 0/90.degree. pattern and bonded together with an epoxy resin. The finished composite possesses a low coefficient of thermal expansion and a substantially greater elastic modulus, stiffness-to-weight ratio, and damping factor than a conventional steel tool support utilized in similar machining operations.

Watershed Management Optimization Support Tool (WMOST) Workshop.

EPA Science Inventory

EPA's Watershed Management Optimization Support Tool (WMOST) version 2 is a decision support tool designed to facilitate integrated water management by communities at the small watershed scale. WMOST allows users to look across management options in stormwater (including green i...

The availability and effectiveness of tools supporting shared decision making in metastatic breast cancer care: a review.

PubMed

Spronk, Inge; Burgers, Jako S; Schellevis, François G; van Vliet, Liesbeth M; Korevaar, Joke C

2018-05-11

Shared decision-making (SDM) in the management of metastatic breast cancer care is associated with positive patient outcomes. In daily clinical practice, however, SDM is not fully integrated yet. Initiatives to improve the implementation of SDM would be helpful. The aim of this review was to assess the availability and effectiveness of tools supporting SDM in metastatic breast cancer care. Literature databases were systematically searched for articles published since 2006 focusing on the development or evaluation of tools to improve information-provision and to support decision-making in metastatic breast cancer care. Internet searches and experts identified additional tools. Data from included tools were extracted and the evaluation of tools was appraised using the GRADE grading system. The literature search yielded five instruments. In addition, two tools were identified via internet searches and consultation of experts. Four tools were specifically developed for supporting SDM in metastatic breast cancer, the other three tools focused on metastatic cancer in general. Tools were mainly applicable across the care process, and usable for decisions on supportive care with or without chemotherapy. All tools were designed for patients to be used before a consultation with the physician. Effects on patient outcomes were generally weakly positive although most tools were not studied in well-designed studies. Despite its recognized importance, only two tools were positively evaluated on effectiveness and are available to support patients with metastatic breast cancer in SDM. These tools show promising results in pilot studies and focus on different aspects of care. However, their effectiveness should be confirmed in well-designed studies before implementation in clinical practice. Innovation and development of SDM tools targeting clinicians as well as patients during a clinical encounter is recommended.

Watershed Management Optimization Support Tool v3

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context that is, accou...

Watershed Management Optimization Support Tool (WMOST) v3: User Guide

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context that is, accou...

Watershed Management Optimization Support Tool (WMOST) v3: Theoretical Documentation

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed context, accounting fo...

Watershed Management Optimization Support Tool (WMOST) v2: Theoretical Documentation

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that evaluates the relative cost-effectiveness of management practices at the local or watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed c...

Development and evaluation of a comprehensive clinical decision support taxonomy: comparison of front-end tools in commercial and internally developed electronic health record systems

PubMed Central

Sittig, Dean F; Ash, Joan S; Feblowitz, Joshua; Meltzer, Seth; McMullen, Carmit; Guappone, Ken; Carpenter, Jim; Richardson, Joshua; Simonaitis, Linas; Evans, R Scott; Nichol, W Paul; Middleton, Blackford

2011-01-01

Background Clinical decision support (CDS) is a valuable tool for improving healthcare quality and lowering costs. However, there is no comprehensive taxonomy of types of CDS and there has been limited research on the availability of various CDS tools across current electronic health record (EHR) systems. Objective To develop and validate a taxonomy of front-end CDS tools and to assess support for these tools in major commercial and internally developed EHRs. Study design and methods We used a modified Delphi approach with a panel of 11 decision support experts to develop a taxonomy of 53 front-end CDS tools. Based on this taxonomy, a survey on CDS tools was sent to a purposive sample of commercial EHR vendors (n=9) and leading healthcare institutions with internally developed state-of-the-art EHRs (n=4). Results Responses were received from all healthcare institutions and 7 of 9 EHR vendors (response rate: 85%). All 53 types of CDS tools identified in the taxonomy were found in at least one surveyed EHR system, but only 8 functions were present in all EHRs. Medication dosing support and order facilitators were the most commonly available classes of decision support, while expert systems (eg, diagnostic decision support, ventilator management suggestions) were the least common. Conclusion We developed and validated a comprehensive taxonomy of front-end CDS tools. A subsequent survey of commercial EHR vendors and leading healthcare institutions revealed a small core set of common CDS tools, but identified significant variability in the remainder of clinical decision support content. PMID:21415065

Stakeholder views of management and decision support tools to integrate climate change into Great Lakes Lake Whitefish management

USGS Publications Warehouse

Lynch, Abigail J.; Taylor, William W.; McCright, Aaron M.

2016-01-01

Decision support tools can aid decision making by systematically incorporating information, accounting for uncertainties, and facilitating evaluation between alternatives. Without user buy-in, however, decision support tools can fail to influence decision-making processes. We surveyed fishery researchers, managers, and fishers affiliated with the Lake Whitefish Coregonus clupeaformis fishery in the 1836 Treaty Waters of Lakes Huron, Michigan, and Superior to assess opinions of current and future management needs to identify barriers to, and opportunities for, developing a decision support tool based on Lake Whitefish recruitment projections with climate change. Approximately 64% of 39 respondents were satisfied with current management, and nearly 85% agreed that science was well integrated into management programs. Though decision support tools can facilitate science integration into management, respondents suggest that they face significant implementation barriers, including lack of political will to change management and perceived uncertainty in decision support outputs. Recommendations from this survey can inform development of decision support tools for fishery management in the Great Lakes and other regions.

Designing Tools for Supporting User Decision-Making in e-Commerce

NASA Astrophysics Data System (ADS)

Sutcliffe, Alistair; Al-Qaed, Faisal

The paper describes a set of tools designed to support a variety of user decision-making strategies. The tools are complemented by an online advisor so they can be adapted to different domains and users can be guided to adopt appropriate tools for different choices in e-commerce, e.g. purchasing high-value products, exploring product fit to users’ needs, or selecting products which satisfy requirements. The tools range from simple recommenders to decision support by interactive querying and comparison matrices. They were evaluated in a scenario-based experiment which varied the users’ task and motivation, with and without an advisor agent. The results show the tools and advisor were effective in supporting users and agreed with the predictions of ADM (adaptive decision making) theory, on which the design of the tools was based.

Watershed Management Optimization Support Tool (WMOST) v2: User Manual and Case Studies

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that evaluates the relative cost-effectiveness of management practices at the local or watershed scale. WMOST models the environmental effects and costs of management decisions in a watershed c...

Hanford Double-Shell Tank Extent-of-Condition Review - 15498

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, J. M.; Baide, D. D.; Barnes, T. J.

2014-11-19

During routine visual inspections of Hanford double-shell waste tank 241-AY-102 (AY-102), anomalies were identified on the annulus floor which resulted in further evaluations. Following a formal leak assessment in October 2012, Washington River Protection Solutions, LLC (WRPS) determined that the primary tank of AY-102 was leaking. A formal leak assessment, documented in RPP-ASMT-53793, Tank 241-AY-102 Leak Assessment Report, identified first-of-a-kind construction difficulties and trial-and-error repairs as major contributing factors to tank failure.1 To determine if improvements in double-shell tank (DST) construction occurred after construction of tank AY-102, a detailed review and evaluation of historical construction records was performed for Hanford’smore » remaining twenty-seven DSTs. Review involved research of 241 boxes of historical project documentation to better understand the condition of the Hanford DST farms, noting similarities in construction difficulties/issues to tank AY-102. Information gathered provides valuable insight regarding construction difficulties, future tank operations decisions, and guidance of the current tank inspection program. Should new waste storage tanks be constructed in the future, these reviews also provide valuable lessons-learned.« less

Development of inorganic composite material based TiO2 for environmental application

NASA Astrophysics Data System (ADS)

Wahyuningsih, Sayekti; Handono Ramelan, Ari; Pramono, Edi; Purnawan, Candra; Anjani, Velina; Estianingsih, Puji; Rinawati, Ludfiaastu; Fadli, Khusnan

2016-02-01

Syntheses of various materials, for green energy nanotechnology applications have special attention to develop emerging areas, such as environmental as well as energy materials. Various approaches for preparing nanostructured photocatalysts, such as titanium dioxide, nickel oxide, lead oxide and their composites, was introduced. The use of nanomaterials as photocatalysts water detoxification by visible light photocatalyst of an inorganic composite as well as dye-sensitized photoreduction was also discussed. The enhancement of selective photocatalyst system was gain by the use of photocatalyst composite materials and applied potential bias on the system. The photoelectrocatalytic degradation of rhodamine B (RB) and Remazol Yellow FG (RY) as water contaminant using the thin film of modified TiO2 as the electrode was investigated via a series of potentials, and various pH. The result showed that the anodic potential bias influenced the degradation rate of water contaminant and exhibited better performance by the positive anodic bias was applied. The pH conditions influence the active dye structure whereas it will interact with inorganic semiconductor photocatalyst. Using dye- sensitized TiO2 system (DSTs), we have applied this system to build water decolorization as a novelty environmental remediation system.

Watershed Management Optimization Support Tool (WMOST) ...

EPA Pesticide Factsheets

EPA's Watershed Management Optimization Support Tool (WMOST) version 2 is a decision support tool designed to facilitate integrated water management by communities at the small watershed scale. WMOST allows users to look across management options in stormwater (including green infrastructure), wastewater, drinking water, and land conservation programs to find the least cost solutions. The pdf version of these presentations accompany the recorded webinar with closed captions to be posted on the WMOST web page. The webinar was recorded at the time a training workshop took place for EPA's Watershed Management Optimization Support Tool (WMOST, v2).

A Design Rationale Capture Tool to Support Design Verification and Re-use

NASA Technical Reports Server (NTRS)

Hooey, Becky Lee; Da Silva, Jonny C.; Foyle, David C.

2012-01-01

A design rationale tool (DR tool) was developed to capture design knowledge to support design verification and design knowledge re-use. The design rationale tool captures design drivers and requirements, and documents the design solution including: intent (why it is included in the overall design); features (why it is designed the way it is); information about how the design components support design drivers and requirements; and, design alternatives considered but rejected. For design verification purposes, the tool identifies how specific design requirements were met and instantiated within the final design, and which requirements have not been met. To support design re-use, the tool identifies which design decisions are affected when design drivers and requirements are modified. To validate the design tool, the design knowledge from the Taxiway Navigation and Situation Awareness (T-NASA; Foyle et al., 1996) system was captured and the DR tool was exercised to demonstrate its utility for validation and re-use.

HUMAN HEALTH METRICS FOR ENVIRONMENTAL DECISION SUPPORT TOOLS: LESSONS FROM HEALTH ECONOMICS AND DECISION ANALYSIS: PUBLISHED REPORT

EPA Science Inventory

NRMRL-CIN-1351A Hofstetter**, P., and Hammitt, J. K. Human Health Metrics for Environmental Decision Support Tools: Lessons from Health Economics and Decision Analysis. EPA/600/R-01/104 (NTIS PB2002-102119). Decision makers using environmental decision support tools are often ...

Development and field testing of a decision support tool to facilitate shared decision making in contraceptive counseling.

PubMed

Dehlendorf, Christine; Fitzpatrick, Judith; Steinauer, Jody; Swiader, Lawrence; Grumbach, Kevin; Hall, Cara; Kuppermann, Miriam

2017-07-01

We developed and formatively evaluated a tablet-based decision support tool for use by women prior to a contraceptive counseling visit to help them engage in shared decision making regarding method selection. Drawing upon formative work around women's preferences for contraceptive counseling and conceptual understanding of health care decision making, we iteratively developed a storyboard and then digital prototypes, based on best practices for decision support tool development. Pilot testing using both quantitative and qualitative data and cognitive testing was conducted. We obtained feedback from patient and provider advisory groups throughout the development process. Ninety-six percent of women who used the tool in pilot testing reported that it helped them choose a method, and qualitative interviews indicated acceptability of the tool's content and presentation. Compared to the control group, women who used the tool demonstrated trends toward increased likelihood of complete satisfaction with their method. Participant responses to cognitive testing were used in tool refinement. Our decision support tool appears acceptable to women in the family planning setting. Formative evaluation of the tool supports its utility among patients making contraceptive decisions, which can be further evaluated in a randomized controlled trial. Copyright © 2017 Elsevier B.V. All rights reserved.

Supporting family caregivers to identify their own needs in end-of-life care: Qualitative findings from a stepped wedge cluster trial.

PubMed

Aoun, Samar; Deas, Kathleen; Toye, Chris; Ewing, Gail; Grande, Gunn; Stajduhar, Kelli

2015-06-01

The Carer Support Needs Assessment Tool encompasses the physical, psychological, social, practical, financial, and spiritual support needs that government policies in many countries emphasize should be assessed and addressed for family caregivers during end-of-life care. To describe the experience of family caregivers of terminally ill people of the Carer Support Needs Assessment Tool intervention in home-based palliative care. This study was conducted during 2012-2014 in Silver Chain Hospice Care Service in Western Australia. This article reports on one part of a three-part evaluation of a stepped wedge cluster trial. All 233 family caregivers receiving the Carer Support Needs Assessment Tool intervention provided feedback on their experiences via brief end-of-trial semi-structured telephone interviews. Data were subjected to a thematic analysis. The overwhelming majority reported finding the Carer Support Needs Assessment Tool assessment process straightforward and easy. Four key themes were identified: (1) the practicality and usefulness of the systematic assessment; (2) emotional responses to caregiver reflection; (3) validation, reassurance, and empowerment; and (4) accessing support and how this was experienced. Family caregivers appreciated the value of the Carer Support Needs Assessment Tool intervention in engaging them in conversations about their needs, priorities, and solutions. The Carer Support Needs Assessment Tool presented a simple, yet potentially effective intervention to help palliative care providers systematically assess and address family caregivers' needs. The Carer Support Needs Assessment Tool provided a formal structure to facilitate discussions with family caregivers to enable needs to be addressed. Such discussions can also inform an evidence base for the ongoing development of services for family caregivers, ensuring that new or improved services are designed to meet the explicit needs of family caregivers. © The Author(s) 2015.

Capturing Communication Supporting Classrooms: The Development of a Tool and Feasibility Study

ERIC Educational Resources Information Center

Dockrell, Julie E.; Bakopoulou, Ioanna; Law, James; Spencer, Sarah; Lindsay, Geoff

2015-01-01

There is an increasing emphasis on supporting the oral language needs of children in the classroom. A variety of different measures have been developed to assist this process but few have been derived systematically from the available research evidence. A Communication Supporting Classrooms Observation Tool (CsC Observation Tool) for children aged…

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2010 CFR

2010-07-01

... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life... empirical tools should be used to support the life safety equivalency evaluation? 102-80.120 Section 102-80...

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2011 CFR

2011-01-01

... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life... empirical tools should be used to support the life safety equivalency evaluation? 102-80.120 Section 102-80...

The Impact of Using SMS as Learning Support Tool on Students' Learning

ERIC Educational Resources Information Center

Gasaymeh, Al-Mothana M.; Aldalalah, Osamah M.

2013-01-01

This study aimed to investigate the impact of using Short Message Service (SMS) as learning support tool on students' learning in an introductory programming course. In addition, the study examined students' perceptions of the advantages and disadvantages of the use of SMS as a learning support tool in their class. The participants in this study…

Development of Asset Management Decision Support Tools for Power Equipment

NASA Astrophysics Data System (ADS)

Okamoto, Tatsuki; Takahashi, Tsuguhiro

Development of asset management decision support tools become very intensive in order to reduce maintenance cost of power equipment due to the liberalization of power business. This article reviews some aspects of present status of asset management decision support tools development for power equipment based on the papers published in international conferences, domestic conventions, and several journals.

Decision support tools to support the operations of traffic management centers (TMC)

DOT National Transportation Integrated Search

2011-01-31

The goal of this project is to develop decision support tools to support traffic management operations based on collected intelligent transportation system (ITS) data. The project developments are in accordance with the needs of traffic management ce...

Implementation of Health Insurance Support Tools in Community Health Centers.

PubMed

Huguet, Nathalie; Hatch, Brigit; Sumic, Aleksandra; Tillotson, Carrie; Hicks, Elizabeth; Nelson, Joan; DeVoe, Jennifer E

2018-01-01

Health information technology (HIT) provides new opportunities for primary care clinics to support patients with health insurance enrollment and maintenance. We present strategies, early findings, and clinic reflections on the development and implementation of HIT tools designed to streamline and improve health insurance tracking at community health centers. We are conducting a hybrid implementation-effectiveness trial to assess novel health insurance enrollment and support tools in primary care clinics. Twenty-three clinics in 7 health centers from the OCHIN practice-based research network are participating in the implementation component of the trial. Participating health centers were randomized to 1 of 2 levels of implementation support, including arm 1 (n = 4 health centers, 11 clinic sites) that received HIT tools and educational materials and arm 2 (n = 3 health centers, 12 clinic sites) that received HIT tools, educational materials, and individualized implementation support with a practice coach. We used mixed-methods (qualitative and quantitative) to assess tool use rates and facilitators and barriers to implementation in the first 6 months. Clinics reported favorable attitudes toward the HIT tools, which replace less efficient and more cumbersome processes, and reflect on the importance of clinic engagement in tool development and refinement. Five of 7 health centers are now regularly using the tools and are actively working to increase tool use. Six months after formal implementation, arm 2 clinics demonstrated higher rates of tool use, compared with arm 1. These results highlight the value of early clinic input in tool development, the potential benefit of practice coaching during HIT tool development and implementation, and a novel method for coupling a hybrid implementation-effectiveness design with principles of improvement science in primary care research. © Copyright 2018 by the American Board of Family Medicine.

Supporting cognition in systems biology analysis: findings on users' processes and design implications.

PubMed

Mirel, Barbara

2009-02-13

Current usability studies of bioinformatics tools suggest that tools for exploratory analysis support some tasks related to finding relationships of interest but not the deep causal insights necessary for formulating plausible and credible hypotheses. To better understand design requirements for gaining these causal insights in systems biology analyses a longitudinal field study of 15 biomedical researchers was conducted. Researchers interacted with the same protein-protein interaction tools to discover possible disease mechanisms for further experimentation. Findings reveal patterns in scientists' exploratory and explanatory analysis and reveal that tools positively supported a number of well-structured query and analysis tasks. But for several of scientists' more complex, higher order ways of knowing and reasoning the tools did not offer adequate support. Results show that for a better fit with scientists' cognition for exploratory analysis systems biology tools need to better match scientists' processes for validating, for making a transition from classification to model-based reasoning, and for engaging in causal mental modelling. As the next great frontier in bioinformatics usability, tool designs for exploratory systems biology analysis need to move beyond the successes already achieved in supporting formulaic query and analysis tasks and now reduce current mismatches with several of scientists' higher order analytical practices. The implications of results for tool designs are discussed.

Quantifying the Personal Creative Experience: Evaluation of Digital Creativity Support Tools Using Self-Report and Physiological Responses

ERIC Educational Resources Information Center

Carroll, Erin Ashley

2013-01-01

Creativity is understood intuitively, but it is not easily defined and therefore difficult to measure. This makes it challenging to evaluate the ability of a digital tool to support the creative process. When evaluating creativity support tools (CSTs), it is critical to look beyond traditional time, error, and other productivity measurements that…

International Assistance for Low-Emission Development Planning: Coordinated Low Emissions Assistance Network (CLEAN) Inventory of Activities and Tools--Preliminary Trends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, S.; Benioff, R.

2011-05-01

The Coordinated Low Emissions Assistance Network (CLEAN) is a voluntary network of international practitioners supporting low-emission planning in developing countries. The network seeks to improve quality of support through sharing project information, tools, best practices and lessons, and by fostering harmonized assistance. CLEAN has developed an inventory to track and analyze international technical support and tools for low-carbon planning activities in developing countries. This paper presents a preliminary analysis of the inventory to help identify trends in assistance activities and tools available to support developing countries with low-emission planning.

Integration of eHealth Tools in the Process of Workplace Health Promotion: Proposal for Design and Implementation

PubMed Central

2018-01-01

Background Electronic health (eHealth) and mobile health (mHealth) tools can support and improve the whole process of workplace health promotion (WHP) projects. However, several challenges and opportunities have to be considered while integrating these tools in WHP projects. Currently, a large number of eHealth tools are developed for changing health behavior, but these tools can support the whole WHP process, including group administration, information flow, assessment, intervention development process, or evaluation. Objective To support a successful implementation of eHealth tools in the whole WHP processes, we introduce a concept of WHP (life cycle model of WHP) with 7 steps and present critical and success factors for the implementation of eHealth tools in each step. Methods We developed a life cycle model of WHP based on the World Health Organization (WHO) model of healthy workplace continual improvement process. We suggest adaptations to the WHO model to demonstrate the large number of possibilities to implement eHealth tools in WHP as well as possible critical points in the implementation process. Results eHealth tools can enhance the efficiency of WHP in each of the 7 steps of the presented life cycle model of WHP. Specifically, eHealth tools can support by offering easier administration, providing an information and communication platform, supporting assessments, presenting and discussing assessment results in a dashboard, and offering interventions to change individual health behavior. Important success factors include the possibility to give automatic feedback about health parameters, create incentive systems, or bring together a large number of health experts in one place. Critical factors such as data security, anonymity, or lack of management involvement have to be addressed carefully to prevent nonparticipation and dropouts. Conclusions Using eHealth tools can support WHP, but clear regulations for the usage and implementation of these tools at the workplace are needed to secure quality and reach sustainable results. PMID:29475828

Software project management tools in global software development: a systematic mapping study.

PubMed

Chadli, Saad Yasser; Idri, Ali; Ros, Joaquín Nicolás; Fernández-Alemán, José Luis; de Gea, Juan M Carrillo; Toval, Ambrosio

2016-01-01

Global software development (GSD) which is a growing trend in the software industry is characterized by a highly distributed environment. Performing software project management (SPM) in such conditions implies the need to overcome new limitations resulting from cultural, temporal and geographic separation. The aim of this research is to discover and classify the various tools mentioned in literature that provide GSD project managers with support and to identify in what way they support group interaction. A systematic mapping study has been performed by means of automatic searches in five sources. We have then synthesized the data extracted and presented the results of this study. A total of 102 tools were identified as being used in SPM activities in GSD. We have classified these tools, according to the software life cycle process on which they focus and how they support the 3C collaboration model (communication, coordination and cooperation). The majority of the tools found are standalone tools (77%). A small number of platforms (8%) also offer a set of interacting tools that cover the software development lifecycle. Results also indicate that SPM areas in GSD are not adequately supported by corresponding tools and deserve more attention from tool builders.

How to support forest management in a world of change: results of some regional studies.

PubMed

Fürst, C; Lorz, C; Vacik, H; Potocic, N; Makeschin, F

2010-12-01

This article presents results of several studies in Middle, Eastern and Southeastern Europe on needs and application areas, desirable attributes and marketing potentials of forest management support tools. By comparing present and future application areas, a trend from sectoral planning towards landscape planning and integration of multiple stakeholder needs is emerging. In terms of conflicts, where management support tools might provide benefit, no clear tendencies were found, neither on local nor on regional level. In contrast, on national and European levels, support of the implementation of laws, directives, and regulations was found to be of highest importance. Following the user-requirements analysis, electronic tools supporting communication are preferred against paper-based instruments. The users identified most important attributes of optimized management support tools: (i) a broad accessibility for all users at any time should be guaranteed, (ii) the possibility to integrate iteratively experiences from case studies and from regional experts into the knowledge base (learning system) should be given, and (iii) a self-explanatory user interface is demanded, which is also suitable for users rather inexperienced with electronic tools. However, a market potential analysis revealed that the willingness to pay for management tools is very limited, although the participants specified realistic ranges of maximal amounts of money, which would be invested if the products were suitable and payment inevitable. To bridge the discrepancy between unwillingness to pay and the need to use management support tools, optimized financing or cooperation models between practice and science must be found.

How to Support Forest Management in a World of Change: Results of Some Regional Studies

NASA Astrophysics Data System (ADS)

Fürst, C.; Lorz, C.; Vacik, H.; Potocic, N.; Makeschin, F.

2010-12-01

This article presents results of several studies in Middle, Eastern and Southeastern Europe on needs and application areas, desirable attributes and marketing potentials of forest management support tools. By comparing present and future application areas, a trend from sectoral planning towards landscape planning and integration of multiple stakeholder needs is emerging. In terms of conflicts, where management support tools might provide benefit, no clear tendencies were found, neither on local nor on regional level. In contrast, on national and European levels, support of the implementation of laws, directives, and regulations was found to be of highest importance. Following the user-requirements analysis, electronic tools supporting communication are preferred against paper-based instruments. The users identified most important attributes of optimized management support tools: (i) a broad accessibility for all users at any time should be guaranteed, (ii) the possibility to integrate iteratively experiences from case studies and from regional experts into the knowledge base (learning system) should be given, and (iii) a self-explanatory user interface is demanded, which is also suitable for users rather inexperienced with electronic tools. However, a market potential analysis revealed that the willingness to pay for management tools is very limited, although the participants specified realistic ranges of maximal amounts of money, which would be invested if the products were suitable and payment inevitable. To bridge the discrepancy between unwillingness to pay and the need to use management support tools, optimized financing or cooperation models between practice and science must be found.

Understanding the stakeholders' intention to use economic decision-support tools: A cross-sectional study with the tobacco return on investment tool.

PubMed

Cheung, Kei Long; Evers, Silvia M A A; Hiligsmann, Mickaël; Vokó, Zoltán; Pokhrel, Subhash; Jones, Teresa; Muñoz, Celia; Wolfenstetter, Silke B; Józwiak-Hagymásy, Judit; de Vries, Hein

2016-01-01

Despite an increased number of economic evaluations of tobacco control interventions, the uptake by stakeholders continues to be limited. Understanding the underlying mechanism in adopting such economic decision-support tools by stakeholders is therefore important. By applying the I-Change Model, this study aims to identify which factors determine potential uptake of an economic decision-support tool, i.e., the Return on Investment tool. Stakeholders (decision-makers, purchasers of services/pharma products, professionals/service providers, evidence generators and advocates of health promotion) were interviewed in five countries, using an I-Change based questionnaire. MANOVA's were conducted to assess differences between intenders and non-intenders regarding beliefs. A multiple regression analysis was conducted to identify the main explanatory variables of intention to use an economic decision-support tool. Ninety-three stakeholders participated. Significant differences in beliefs were found between non-intenders and intenders: risk perception, attitude, social support, and self-efficacy towards using the tool. Regression showed that demographics, pre-motivational, and motivational factors explained 69% of the variation in intention. This study is the first to provide a theoretical framework to understand differences in beliefs between stakeholders who do or do not intend to use economic decision-support tools, and empirically corroborating the framework. This contributes to our understanding of the facilitators and barriers to the uptake of these studies. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

OPTIMIZING USABILITY OF AN ECONOMIC DECISION SUPPORT TOOL: PROTOTYPE OF THE EQUIPT TOOL.

PubMed

Cheung, Kei Long; Hiligsmann, Mickaël; Präger, Maximilian; Jones, Teresa; Józwiak-Hagymásy, Judit; Muñoz, Celia; Lester-George, Adam; Pokhrel, Subhash; López-Nicolás, Ángel; Trapero-Bertran, Marta; Evers, Silvia M A A; de Vries, Hein

2018-01-01

Economic decision-support tools can provide valuable information for tobacco control stakeholders, but their usability may impact the adoption of such tools. This study aims to illustrate a mixed-method usability evaluation of an economic decision-support tool for tobacco control, using the EQUIPT ROI tool prototype as a case study. A cross-sectional mixed methods design was used, including a heuristic evaluation, a thinking aloud approach, and a questionnaire testing and exploring the usability of the Return of Investment tool. A total of sixty-six users evaluated the tool (thinking aloud) and completed the questionnaire. For the heuristic evaluation, four experts evaluated the interface. In total twenty-one percent of the respondents perceived good usability. A total of 118 usability problems were identified, from which twenty-six problems were categorized as most severe, indicating high priority to fix them before implementation. Combining user-based and expert-based evaluation methods is recommended as these were shown to identify unique usability problems. The evaluation provides input to optimize usability of a decision-support tool, and may serve as a vantage point for other developers to conduct usability evaluations to refine similar tools before wide-scale implementation. Such studies could reduce implementation gaps by optimizing usability, enhancing in turn the research impact of such interventions.

Tools and Strategies for Engaging the Supervisor in Technology-Supported Work-Based Learning, Evaluation Research

ERIC Educational Resources Information Center

Bianco, Manuela; Collis, Betty

2004-01-01

This study reports the results of the formative evaluations of two computer-supported tools and the associated strategies for their use. Tools and strategies embedded in web-based courses can increase a supervisor's involvement in helping employees transfer learning onto the workplace. Issues relating to characteristics of the tools and strategies…

An agent architecture for an integrated forest ecosystem management decision support system

Treesearch

Donald Nute; Walter D. Potter; Mayukh Dass; Astrid Glende; Frederick Maier; Hajime Uchiyama; Jin Wang; Mark Twery; Peter Knopp; Scott Thomasma; H. Michael Rauscher

2003-01-01

A wide variety of software tools are available to support decision in the management of forest ecosystems. These tools include databases, growth and yield models, wildlife models, silvicultural expert systems, financial models, geographical informations systems, and visualization tools. Typically, each of these tools has its own complex interface and data format. To...

Intelligent Model Management in a Forest Ecosystem Management Decision Support System

Treesearch

Donald Nute; Walter D. Potter; Frederick Maier; Jin Wang; Mark Twery; H. Michael Rauscher; Peter Knopp; Scott Thomasma; Mayukh Dass; Hajime Uchiyama

2002-01-01

Decision making for forest ecosystem management can include the use of a wide variety of modeling tools. These tools include vegetation growth models, wildlife models, silvicultural models, GIS, and visualization tools. NED-2 is a robust, intelligent, goal-driven decision support system that integrates tools in each of these categories. NED-2 uses a blackboard...

Micronutrient Action Plan Instructional Tool (MAPit): A Training Tool to Support Public Health Professionals' Efforts to Eliminate Micronutrient Malnutrition

ERIC Educational Resources Information Center

Elbon, Suzanne; Nsubuga, Peter; Knowles, Jacky; Bobrow, Emily; Parvanta, Ibrahim; Timmer, Arnold; van der Haar, Frits

2006-01-01

Micronutrient malnutrition (MM) is a global health problem that affects the national socioeconomic stability of an affected country. This article describes a multimedia training tool, the Micronutrient Action Plan instructional tool (MAPit), which has been designed to support public health professionals' efforts to eliminate MM. An overview and…

Scaffolding Assignments: Analysis of Assignmentor as a Tool to Support First Year Students' Academic Writing Skills

ERIC Educational Resources Information Center

Silva, Pedro

2017-01-01

There are several technological tools which aim to support first year students' challenges, especially when it comes to academic writing. This paper analyses one of these tools, Wiley's AssignMentor. The Technological Pedagogical Content Knowledge framework was used to systematise this analysis. The paper showed an alignment between the tools'…

Impacts of the Use of "Support Tools" on a Distance Language Learning Course

ERIC Educational Resources Information Center

Pradier, Vincent; Andronova, Olga

2014-01-01

This study is a temporary assessment of the impacts of the use of support tools as part of a distance language training course for non-specialist students implemented at the Diderot Paris VII University in 2011/2012. The study mainly focuses on the uses of the support tool "Sounds Right APP" and details the results of the analysis of…

The Effects of the Coordination Support on Shared Mental Models and Coordinated Action

ERIC Educational Resources Information Center

Kim, Hyunsong; Kim, Dongsik

2008-01-01

The purpose of this study was to examine the effects of coordination support (tool support and tutor support) on the development of shared mental models (SMMs) and coordinated action in a computer-supported collaborative learning environment. Eighteen students were randomly assigned to one of three conditions, including the tool condition, the…

Evaluating the Utility of Web-Based Consumer Support Tools Using Rough Sets

NASA Astrophysics Data System (ADS)

Maciag, Timothy; Hepting, Daryl H.; Slezak, Dominik; Hilderman, Robert J.

On the Web, many popular e-commerce sites provide consumers with decision support tools to assist them in their commerce-related decision-making. Many consumers will rank the utility of these tools quite highly. Data obtained from web usage mining analyses, which may provide knowledge about a user's online experiences, could help indicate the utility of these tools. This type of analysis could provide insight into whether provided tools are adequately assisting consumers in conducting their online shopping activities or if new or additional enhancements need consideration. Although some research in this regard has been described in previous literature, there is still much that can be done. The authors of this paper hypothesize that a measurement of consumer decision accuracy, i.e. a measurement preferences, could help indicate the utility of these tools. This paper describes a procedure developed towards this goal using elements of rough set theory. The authors evaluated the procedure using two support tools, one based on a tool developed by the US-EPA and the other developed by one of the authors called cogito. Results from the evaluation did provide interesting insights on the utility of both support tools. Although it was shown that the cogito tool obtained slightly higher decision accuracy, both tools could be improved from additional enhancements. Details of the procedure developed and results obtained from the evaluation will be provided. Opportunities for future work are also discussed.

Demonstration of the application of traffic management center decision support tools.

DOT National Transportation Integrated Search

2013-03-01

Decision support tools were developed in previous Florida Department of Transportation (FDOT) : research projects to allow for better analysis and visualization of historical traffic and incident : data, in support of incident management and traffic ...

Detroit deicing decision support tool : description, operation, and simulation results

DOT National Transportation Integrated Search

2006-01-01

The John A. Volpe National Transportation Systems Center, sponsored by the National Aeronautics and Space Administration, : developed a deicing decision support tool, for Detroit Metropolitan Wayne County Airport (DTW).1 The deicing decision support ...

Enhancement of the EPA Stormwater BMP Decision-Support Tool (SUSTAIN)

EPA Science Inventory

U.S. Environmental Protection Agency (EPA) has been developing and improving a decision-support tool for placement of stormwater best management practices (BMPs) at strategic locations in urban watersheds. The tool is called the System for Urban Stormwater Treatment and Analysis...

Survey of Non-Rigid Registration Tools in Medicine.

PubMed

Keszei, András P; Berkels, Benjamin; Deserno, Thomas M

2017-02-01

We catalogue available software solutions for non-rigid image registration to support scientists in selecting suitable tools for specific medical registration purposes. Registration tools were identified using non-systematic search in Pubmed, Web of Science, IEEE Xplore® Digital Library, Google Scholar, and through references in identified sources (n = 22). Exclusions are due to unavailability or inappropriateness. The remaining (n = 18) tools were classified by (i) access and technology, (ii) interfaces and application, (iii) living community, (iv) supported file formats, and (v) types of registration methodologies emphasizing the similarity measures implemented. Out of the 18 tools, (i) 12 are open source, 8 are released under a permissive free license, which imposes the least restrictions on the use and further development of the tool, 8 provide graphical processing unit (GPU) support; (ii) 7 are built on software platforms, 5 were developed for brain image registration; (iii) 6 are under active development but only 3 have had their last update in 2015 or 2016; (iv) 16 support the Analyze format, while 7 file formats can be read with only one of the tools; and (v) 6 provide multiple registration methods and 6 provide landmark-based registration methods. Based on open source, licensing, GPU support, active community, several file formats, algorithms, and similarity measures, the tools Elastics and Plastimatch are chosen for the platform ITK and without platform requirements, respectively. Researchers in medical image analysis already have a large choice of registration tools freely available. However, the most recently published algorithms may not be included in the tools, yet.

[Tools for junior scientists support from medical societies: survey amongst members organized in the Association of the Scientific Medical Societies (AWMF)].

PubMed

Meybohm, Patrick; Lindau, Simone; Schürholz, Tobias; Larmann, Jan; Stehr, Sebastian N; Nau, Carla

2015-01-01

A decreasing number of young physicians go for an academic career. The most frequently cited reasons are deficient structures and a lack of perspectives. The German Research Foundation warned against supply gaps in the medical sciences and in 2010 published recommendations for the improvement of professional development at all levels of medical education. A systematic survey of existing support tools and their dissemination among the medical societies has not yet been conducted. Network members of the AWMF were contacted by e-mail and asked to answer 59 questions regarding the support of junior scientists in their respective societies. 28 out of 147 societies replied to the questionnaire. Most of the societies offer at least one of the following tools (multiple responses; selective topics): award for oral presentations (n=27), free attendance at conferences (n=15), financial research funding (n=19), assessment of any funding application (n=10), mentoring (n=6), support of students working on their doctoral thesis (n=26), support of studies abroad (n=16), training course on statistics/ laboratory methods (n=17), support with clinical studies (n=22). Here, we present our survey findings on established support tools for junior scientists for the first time. Apart from the medical schools, several medical-scientific societies have also started to provide tools of support for their junior scientists. However, to ensure that long-term perspectives and attractive conditions are provided in the field of medical science for junior scientists, broader support and interdisciplinary exchange of established tools are needed. Copyright © 2015. Published by Elsevier GmbH.

The Effects of Tools of the Mind on Math and Reading Scores in Kindergarten

ERIC Educational Resources Information Center

Mackay, Patricia E.

2013-01-01

Although a limited body of research has supported the positive impact of the Tools of the Mind curriculum on the development of self-regulation, research supporting a direct relationship between Tools and academic achievement is extremely limited. The purpose of this study is to evaluate the effectiveness of the Tools of the Mind curriculum…

The Use of a Metacognitive Tool in an Online Social Supportive Learning Environment: An Activity Theory Analysis

ERIC Educational Resources Information Center

Martinez, Ray Earl

2010-01-01

This investigation is an exploratory study of the use of a metacognitive software tool in a social supportive learning environment. The tool combined metacognitive knowledge and regulation functionality embedded within the content of an eight week online graduate education course. Twenty-three learners, who were practicing teachers, used the tool.…

The Personal Digital Library (PDL)-based e-learning: Using the PDL as an e-learning support tool

NASA Astrophysics Data System (ADS)

Deng, Xiaozhao; Ruan, Jianhai

The paper describes a support tool for learners engaged in e-learning, the Personal Digital Library (PDL). The characteristics and functionality of the PDL are presented. Suggested steps for constructing and managing a PDL are outlined and discussed briefly. The authors believe that the PDL as a support tool of e-learning will be important and essential in the future.

Enhancement of the EPA Stormwater BMP Decision-Support Tool (SUSTAIN) - slides

EPA Science Inventory

U.S. Environmental Protection Agency (EPA) has been developing and improving a decision-support tool for placement of stormwater best management practices (BMPs) at strategic locations in urban watersheds. The tool is called the System for Urban Stormwater Treatment and Analysis...

Integrated decision support tools for Puget Sound salmon recovery planning

EPA Science Inventory

We developed a set of tools to provide decision support for community-based salmon recovery planning in Salish Sea watersheds. Here we describe how these tools are being integrated and applied in collaboration with Puget Sound tribes and community stakeholders to address restora...

Decision support tools for proton therapy ePR: intelligent treatment planning navigator and radiation toxicity tool for evaluating of prostate cancer treatment

NASA Astrophysics Data System (ADS)

Le, Anh H.; Deshpande, Ruchi; Liu, Brent J.

2010-03-01

The electronic patient record (ePR) has been developed for prostate cancer patients treated with proton therapy. The ePR has functionality to accept digital input from patient data, perform outcome analysis and patient and physician profiling, provide clinical decision support and suggest courses of treatment, and distribute information across different platforms and health information systems. In previous years, we have presented the infrastructure of a medical imaging informatics based ePR for PT with functionality to accept digital patient information and distribute this information across geographical location using Internet protocol. In this paper, we present the ePR decision support tools which utilize the imaging processing tools and data collected in the ePR. The two decision support tools including the treatment plan navigator and radiation toxicity tool are presented to evaluate prostate cancer treatment to improve proton therapy operation and improve treatment outcomes analysis.

Cooperative problem solving with personal mobile information tools in hospitals.

PubMed

Buchauer, A; Werner, R; Haux, R

1998-01-01

Health-care professionals have a broad range of needs for information and cooperation while working at different points of care (e.g., outpatient departments, wards, and functional units such as operating theaters). Patient-related data and medical knowledge have to be widely available to support high-quality patient care. Furthermore, due to the increased specialization of health-care professionals, efficient collaboration is required. Personal mobile information tools have a considerable potential to realize almost ubiquitous information and collaborative support. They enable to unite the functionality of conventional tools such as paper forms, dictating machines, and pagers into one tool. Moreover, they can extend the support already provided by clinical workstations. An approach is described for the integration of mobile information tools with heterogeneous hospital information systems. This approach includes identification of functions which should be provided on mobile tools. Major functions are the presentation of medical records and reports, electronic mailing to support interpersonal communication, and the provision of editors for structured clinical documentation. To realize those functions on mobile tools, we propose a document-based client-server architecture that enables mobile information tools to interoperate with existing computer-based application systems. Open application systems and powerful, partially wireless, hospital-wide networks are the prerequisites for the introduction of mobile information tools.

Data access and decision tools for coastal water resources management

EPA Science Inventory

US EPA has supported the development of numerous models and tools to support implementation of environmental regulations. However, transfer of knowledge and methods from detailed technical models to support practical problem solving by local communities and watershed or coastal ...

Factors affecting adoption and implementation of AHRQ health literacy tools in pharmacies.

PubMed

Shoemaker, Sarah J; Staub-DeLong, Leah; Wasserman, Melanie; Spranca, Mark

2013-01-01

Pharmacies are key sources of medication information for patients, yet few effectively serve patients with low health literacy. The Agency for Healthcare Research and Quality (AHRQ) supported the development of four health literacy tools for pharmacists to address this problem, and to help assess and improve pharmacies' health literacy practices. This study aimed to understand the facilitators and barriers to the adoption and implementation of AHRQ's health literacy tools, particularly a tool to assess a pharmacy's health literacy practices. We conducted a comparative, multiple-case study of eight pharmacies, guided by an adaptation of Rogers's Diffusion of Innovations model. Data were collected and triangulated through interviews, site visit observations, and the review of documents, and analyzed on the factors affecting pharmacies' adoption decisions and implementation of the tools. Factors important to pharmacies' decision to adopt the health literacy tools included awareness of health literacy; a culture of innovation; a change champion; the relative advantage and compatibility of the tools; and an invitation to utilize and receive support to use the tools. The barriers included a lack of leadership support, limited staff time, and a perception of the tools as complex with limited value. For implementation, the primary facilitators were buy-in from leadership, qualified staff, college-affiliated change champions, the adaptability and organization of the tool, and support. Barriers to implementation were limited leadership buy-in, prioritization of other activities, lack of qualified staff, and tool complexity. If pharmacists are provided tools that could ultimately improve their health literacy practices and patient-centered services; and the tools have a clear relative advantage, are simple as well adaptable, and the pharmacists are supported in their efforts - either by colleagues or by collaborating with colleges of pharmacy-then there could be important progress toward achieving the goals of the National Action Plan for Health Literacy. Copyright © 2013 Elsevier Inc. All rights reserved.

Identifying Cost-Effective Water Resources Management Strategies: Watershed Management Optimization Support Tool (WMOST)

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a public-domain software application designed to aid decision makers with integrated water resources management. The tool allows water resource managers and planners to screen a wide-range of management practices for c...

Ready, Set, Change! Development and usability testing of an online readiness for change decision support tool for healthcare organizations.

PubMed

Timmings, Caitlyn; Khan, Sobia; Moore, Julia E; Marquez, Christine; Pyka, Kasha; Straus, Sharon E

2016-02-24

To address challenges related to selecting a valid, reliable, and appropriate readiness assessment measure in practice, we developed an online decision support tool to aid frontline implementers in healthcare settings in this process. The focus of this paper is to describe a multi-step, end-user driven approach to developing this tool for use during the planning stages of implementation. A multi-phase, end-user driven approach was used to develop and test the usability of a readiness decision support tool. First, readiness assessment measures that are valid, reliable, and appropriate for healthcare settings were identified from a systematic review. Second, a mapping exercise was performed to categorize individual items of included measures according to key readiness constructs from an existing framework. Third, a modified Delphi process was used to collect stakeholder ratings of the included measures on domains of feasibility, relevance, and likelihood to recommend. Fourth, two versions of a decision support tool prototype were developed and evaluated for usability. Nine valid and reliable readiness assessment measures were included in the decision support tool. The mapping exercise revealed that of the nine measures, most measures (78 %) focused on assessing readiness for change at the organizational versus the individual level, and that four measures (44 %) represented all constructs of organizational readiness. During the modified Delphi process, stakeholders rated most measures as feasible and relevant for use in practice, and reported that they would be likely to recommend use of most measures. Using data from the mapping exercise and stakeholder panel, an algorithm was developed to link users to a measure based on characteristics of their organizational setting and their readiness for change assessment priorities. Usability testing yielded recommendations that were used to refine the Ready, Set, Change! decision support tool . Ready, Set, Change! decision support tool is an implementation support that is designed to facilitate the routine incorporation of a readiness assessment as an early step in implementation. Use of this tool in practice may offer time and resource-saving implications for implementation.

Integration of eHealth Tools in the Process of Workplace Health Promotion: Proposal for Design and Implementation.

PubMed

Jimenez, Paulino; Bregenzer, Anita

2018-02-23

Electronic health (eHealth) and mobile health (mHealth) tools can support and improve the whole process of workplace health promotion (WHP) projects. However, several challenges and opportunities have to be considered while integrating these tools in WHP projects. Currently, a large number of eHealth tools are developed for changing health behavior, but these tools can support the whole WHP process, including group administration, information flow, assessment, intervention development process, or evaluation. To support a successful implementation of eHealth tools in the whole WHP processes, we introduce a concept of WHP (life cycle model of WHP) with 7 steps and present critical and success factors for the implementation of eHealth tools in each step. We developed a life cycle model of WHP based on the World Health Organization (WHO) model of healthy workplace continual improvement process. We suggest adaptations to the WHO model to demonstrate the large number of possibilities to implement eHealth tools in WHP as well as possible critical points in the implementation process. eHealth tools can enhance the efficiency of WHP in each of the 7 steps of the presented life cycle model of WHP. Specifically, eHealth tools can support by offering easier administration, providing an information and communication platform, supporting assessments, presenting and discussing assessment results in a dashboard, and offering interventions to change individual health behavior. Important success factors include the possibility to give automatic feedback about health parameters, create incentive systems, or bring together a large number of health experts in one place. Critical factors such as data security, anonymity, or lack of management involvement have to be addressed carefully to prevent nonparticipation and dropouts. Using eHealth tools can support WHP, but clear regulations for the usage and implementation of these tools at the workplace are needed to secure quality and reach sustainable results. ©Paulino Jimenez, Anita Bregenzer. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 23.02.2018.

Offsite radiological consequence analysis for the bounding flammable gas accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARRO, C.A.

2003-03-19

The purpose of this analysis is to calculate the offsite radiological consequence of the bounding flammable gas accident. DOE-STD-3009-94, ''Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses'', requires the formal quantification of a limited subset of accidents representing a complete set of bounding conditions. The results of these analyses are then evaluated to determine if they challenge the DOE-STD-3009-94, Appendix A, ''Evaluation Guideline,'' of 25 rem total effective dose equivalent in order to identify and evaluate safety class structures, systems, and components. The bounding flammable gas accident is a detonation in a single-shell tank (SST).more » A detonation versus a deflagration was selected for analysis because the faster flame speed of a detonation can potentially result in a larger release of respirable material. As will be shown, the consequences of a detonation in either an SST or a double-shell tank (DST) are approximately equal. A detonation in an SST was selected as the bounding condition because the estimated respirable release masses are the same and because the doses per unit quantity of waste inhaled are generally greater for SSTs than for DSTs. Appendix A contains a DST analysis for comparison purposes.« less

Emergent Toxins in North Atlantic Temperate Waters: A Challenge for Monitoring Programs and Legislation

PubMed Central

Silva, Marisa; Pratheepa, Vijaya K.; Botana, Luis M.; Vasconcelos, Vitor

2015-01-01

Harmful Algal Blooms (HAB) are complex to manage due to their intermittent nature and their severe impact on the economy and human health. The conditions which promote HAB have not yet been fully explained, though climate change and anthropogenic intervention are pointed as significant factors. The rise of water temperature, the opening of new sea canals and the introduction of ship ballast waters all contribute to the dispersion and establishment of toxin-producing invasive species that promote the settling of emergent toxins in the food-chain. Tetrodotoxin, ciguatoxin, palytoxin and cyclic imines are commonly reported in warm waters but have also caused poisoning incidents in temperate zones. There is evidence that monitoring for these toxins exclusively in bivalves is simplistic and underestimates the risk to public health, since new vectors have been reported for these toxins and as well for regulated toxins such as PSTs and DSTs. In order to avoid public health impacts, there is a need for adequate monitoring programs, a need for establishing appropriate legislation, and a need for optimizing effective methods of analysis. In this review, we will compile evidence concerning emergent marine toxins and provide data that may indicate the need to restructure the current monitoring programs of HAB. PMID:25785464

Emergent toxins in North Atlantic temperate waters: a challenge for monitoring programs and legislation.

PubMed

Silva, Marisa; Pratheepa, Vijaya K; Botana, Luis M; Vasconcelos, Vitor

2015-03-16

Harmful Algal Blooms (HAB) are complex to manage due to their intermittent nature and their severe impact on the economy and human health. The conditions which promote HAB have not yet been fully explained, though climate change and anthropogenic intervention are pointed as significant factors. The rise of water temperature, the opening of new sea canals and the introduction of ship ballast waters all contribute to the dispersion and establishment of toxin-producing invasive species that promote the settling of emergent toxins in the food-chain. Tetrodotoxin, ciguatoxin, palytoxin and cyclic imines are commonly reported in warm waters but have also caused poisoning incidents in temperate zones. There is evidence that monitoring for these toxins exclusively in bivalves is simplistic and underestimates the risk to public health, since new vectors have been reported for these toxins and as well for regulated toxins such as PSTs and DSTs. In order to avoid public health impacts, there is a need for adequate monitoring programs, a need for establishing appropriate legislation, and a need for optimizing effective methods of analysis. In this review, we will compile evidence concerning emergent marine toxins and provide data that may indicate the need to restructure the current monitoring programs of HAB.

Tools to support GHG emissions reduction : a regional effort, part 1 - carbon footprint estimation and decision support.

DOT National Transportation Integrated Search

2010-09-01

Tools are proposed for carbon footprint estimation of transportation construction projects and decision support : for construction firms that must make equipment choice and usage decisions that affect profits, project duration : and greenhouse gas em...

U.S. CASE STUDIES USING MUNICIPAL SOLID WASTE DECISION SUPPORT TOOL

EPA Science Inventory

The paper provides an overview of some case studies using the recently completed muniicpal solid waste decision support tool (MSW-DST) in communities across the U.S. The purpose of the overview is to help illustrate the variety of potential applications of the tool. The methodolo...

Electronic tools to support medication reconciliation: a systematic review.

PubMed

Marien, Sophie; Krug, Bruno; Spinewine, Anne

2017-01-01

Medication reconciliation (MedRec) is essential for reducing patient harm caused by medication discrepancies across care transitions. Electronic support has been described as a promising approach to moving MedRec forward. We systematically reviewed the evidence about electronic tools that support MedRec, by (a) identifying tools; (b) summarizing their characteristics with regard to context, tool, implementation, and evaluation; and (c) summarizing key messages for successful development and implementation. We searched PubMed, the Cumulative Index to Nursing and Allied Health Literature, Embase, PsycINFO, and the Cochrane Library, and identified additional reports from reference lists, reviews, and patent databases. Reports were included if the electronic tool supported medication history taking and the identification and resolution of medication discrepancies. Two researchers independently selected studies, evaluated the quality of reporting, and extracted data. Eighteen reports relative to 11 tools were included. There were eight quality improvement projects, five observational effectiveness studies, three randomized controlled trials (RCTs) or RCT protocols (ie, descriptions of RCTs in progress), and two patents. All tools were developed in academic environments in North America. Most used electronic data from multiple sources and partially implemented functionalities considered to be important. Relevant information on functionalities and implementation features was frequently missing. Evaluations mainly focused on usability, adherence, and user satisfaction. One RCT evaluated the effect on potential adverse drug events. Successful implementation of electronic tools to support MedRec requires favorable context, properly designed tools, and attention to implementation features. Future research is needed to evaluate the effect of these tools on the quality and safety of healthcare. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Indicators and Measurement Tools for Health Systems Integration: A Knowledge Synthesis.

PubMed

Suter, Esther; Oelke, Nelly D; da Silva Lima, Maria Alice Dias; Stiphout, Michelle; Janke, Robert; Witt, Regina Rigatto; Van Vliet-Brown, Cheryl; Schill, Kaela; Rostami, Mahnoush; Hepp, Shelanne; Birney, Arden; Al-Roubaiai, Fatima; Marques, Giselda Quintana

2017-11-13

Despite far reaching support for integrated care, conceptualizing and measuring integrated care remains challenging. This knowledge synthesis aimed to identify indicator domains and tools to measure progress towards integrated care. We used an established framework and a Delphi survey with integration experts to identify relevant measurement domains. For each domain, we searched and reviewed the literature for relevant tools. From 7,133 abstracts, we retrieved 114 unique tools. We found many quality tools to measure care coordination, patient engagement and team effectiveness/performance. In contrast, there were few tools in the domains of performance measurement and information systems, alignment of organizational goals and resource allocation. The search yielded 12 tools that measure overall integration or three or more indicator domains. Our findings highlight a continued gap in tools to measure foundational components that support integrated care. In the absence of such targeted tools, "overall integration" tools may be useful for a broad assessment of the overall state of a system. Continued progress towards integrated care depends on our ability to evaluate the success of strategies across different levels and context. This study has identified 114 tools that measure integrated care across 16 domains, supporting efforts towards a unified measurement framework.

Developing a 300C Analog Tool for EGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Normann, Randy

2015-03-23

This paper covers the development of a 300°C geothermal well monitoring tool for supporting future EGS (enhanced geothermal systems) power production. This is the first of 3 tools planed. This is an analog tool designed for monitoring well pressure and temperature. There is discussion on 3 different circuit topologies and the development of the supporting surface electronics and software. There is information on testing electronic circuits and component. One of the major components is the cable used to connect the analog tool to the surface.

Using Scaffold Supports to Improve Student Practice and Understanding of an Authentic Inquiry Process in Science

ERIC Educational Resources Information Center

Turcotte, Sandrine; Hamel, Christine

2016-01-01

This study addressed computer-supported collaborative scientific inquiries in remote networked schools (Quebec, Canada). Three dyads of Grade 5-6 classrooms from remote locations across the province collaborated using the knowledge-building tool Knowledge Forum. Customized scaffold supports embedded in the online tool were used to support student…

Tools to Support Human Factors and Systems Engineering Interactions During Early Analysis

NASA Technical Reports Server (NTRS)

Thronesbery, Carroll; Malin, Jane T.; Holden, Kritina; Smith, Danielle Paige

2005-01-01

We describe an approach and existing software tool support for effective interactions between human factors engineers and systems engineers in early analysis activities during system acquisition. We examine the tasks performed during this stage, emphasizing those tasks where system engineers and human engineers interact. The Concept of Operations (ConOps) document is an important product during this phase, and particular attention is paid to its influences on subsequent acquisition activities. Understanding this influence helps ConOps authors describe a complete system concept that guides subsequent acquisition activities. We identify commonly used system engineering and human engineering tools and examine how they can support the specific tasks associated with system definition. We identify possible gaps in the support of these tasks, the largest of which appears to be creating the ConOps document itself. Finally, we outline the goals of our future empirical investigations of tools to support system concept definition.

Tools to Support Human Factors and Systems Engineering Interactions During Early Analysis

NASA Technical Reports Server (NTRS)

Thronesbery, Carroll; Malin, Jane T.; Holden, Kritina; Smith, Danielle Paige

2006-01-01

We describe an approach and existing software tool support for effective interactions between human factors engineers and systems engineers in early analysis activities during system acquisition. We examine the tasks performed during this stage, emphasizing those tasks where system engineers and human engineers interact. The Concept of Operations (ConOps) document is an important product during this phase, and particular attention is paid to its influences on subsequent acquisition activities. Understanding this influence helps ConOps authors describe a complete system concept that guides subsequent acquisition activities. We identify commonly used system engineering and human engineering tools and examine how they can support the specific tasks associated with system definition. We identify possible gaps in the support of these tasks, the largest of which appears to be creating the ConOps document itself. Finally, we outline the goals of our future empirical investigations of tools to support system concept definition.

Toward a Visualization-Supported Workflow for Cyber Alert Management using Threat Models and Human-Centered Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franklin, Lyndsey; Pirrung, Megan A.; Blaha, Leslie M.

Cyber network analysts follow complex processes in their investigations of potential threats to their network. Much research is dedicated to providing automated tool support in the effort to make their tasks more efficient, accurate, and timely. This tool support comes in a variety of implementations from machine learning algorithms that monitor streams of data to visual analytic environments for exploring rich and noisy data sets. Cyber analysts, however, often speak of a need for tools which help them merge the data they already have and help them establish appropriate baselines against which to compare potential anomalies. Furthermore, existing threat modelsmore » that cyber analysts regularly use to structure their investigation are not often leveraged in support tools. We report on our work with cyber analysts to understand they analytic process and how one such model, the MITRE ATT&CK Matrix [32], is used to structure their analytic thinking. We present our efforts to map specific data needed by analysts into the threat model to inform our eventual visualization designs. We examine data mapping for gaps where the threat model is under-supported by either data or tools. We discuss these gaps as potential design spaces for future research efforts. We also discuss the design of a prototype tool that combines machine-learning and visualization components to support cyber analysts working with this threat model.« less

Evaluating the State of Water Management in the Rio Grande/Bravo Basin

NASA Astrophysics Data System (ADS)

Ortiz Partida, Jose Pablo; Sandoval-Solis, Samuel; Diaz Gomez, Romina

2017-04-01

Water resource modeling tools have been developed for many different regions and sub-basins of the Rio Grande/Bravo (RGB). Each of these tools has specific objectives, whether it is to explore drought mitigation alternatives, conflict resolution, climate change evaluation, tradeoff and economic synergies, water allocation, reservoir operations, or collaborative planning. However, there has not been an effort to integrate different available tools, or to link models developed for specific reaches into a more holistic watershed decision-support tool. This project outlines promising next steps to meet long-term goals of improved decision support tools and modeling. We identify, describe, and synthesize water resources management practices in the RGB basin and available water resources models and decision support tools that represent the RGB and the distribution of water for human and environmental uses. The extent body of water resources modeling is examined from a perspective of environmental water needs and water resources management and thereby allows subsequent prioritization of future research and monitoring needs for the development of river system modeling tools. This work communicates the state of the RGB science to diverse stakeholders, researchers, and decision-makers. The products of this project represent a planning tool to support an integrated water resources management framework to maximize economic and social welfare without compromising vital ecosystems.

A Tool Supporting Collaborative Data Analytics Workflow Design and Management

NASA Astrophysics Data System (ADS)

Zhang, J.; Bao, Q.; Lee, T. J.

2016-12-01

Collaborative experiment design could significantly enhance the sharing and adoption of the data analytics algorithms and models emerged in Earth science. Existing data-oriented workflow tools, however, are not suitable to support collaborative design of such a workflow, to name a few, to support real-time co-design; to track how a workflow evolves over time based on changing designs contributed by multiple Earth scientists; and to capture and retrieve collaboration knowledge on workflow design (discussions that lead to a design). To address the aforementioned challenges, we have designed and developed a technique supporting collaborative data-oriented workflow composition and management, as a key component toward supporting big data collaboration through the Internet. Reproducibility and scalability are two major targets demanding fundamental infrastructural support. One outcome of the project os a software tool, supporting an elastic number of groups of Earth scientists to collaboratively design and compose data analytics workflows through the Internet. Instead of recreating the wheel, we have extended an existing workflow tool VisTrails into an online collaborative environment as a proof of concept.

Minimising farm crop protection pressure supported by the multiple functionalities of the DISCUSS indicator set.

PubMed

Wustenberghs, Hilde; Fevery, Davina; Lauwers, Ludwig; Marchand, Fleur; Spanoghe, Pieter

2018-03-15

Sustainable crop protection (SCP) has many facets. Farmers may therefore perceive transition to SCP as very complex. The Dual Indicator Set for Crop Protection Sustainability (DISCUSS) can handle this complexity. To provide targeted support throughout the transition to SCP, complexity capture must be synchronised with the time course of on-farm decision-making. Tool use must be tuned to farmer awareness and appropriate level of data in consecutive stages. This paper thus explores the potential functionalities of DISCUSS in relation to both complexity and time. Results from apple and potato crop protection show three potential functions: DISCUSS can be used as (1) a simulation tool for communication and decision support, (2) an assessment and monitoring tool, and (3) a discussion support tool for farmer groups. Analysis of these functionalities using a framework for guiding on-farm sustainability assessment and strategic decision-making shows how each functionality can support the consecutive steps of transition to SCP, i.e. using the right tool functionality at the right time. Copyright © 2017 Elsevier B.V. All rights reserved.

Clean birth kits to improve birth practices: development and testing of a country level decision support tool.

PubMed

Hundley, Vanora A; Avan, Bilal I; Ahmed, Haris; Graham, Wendy J

2012-12-19

Clean birth practices can prevent sepsis, one of the leading causes of both maternal and newborn mortality. Evidence suggests that clean birth kits (CBKs), as part of package that includes education, are associated with a reduction in newborn mortality, omphalitis, and puerperal sepsis. However, questions remain about how best to approach the introduction of CBKs in country. We set out to develop a practical decision support tool for programme managers of public health systems who are considering the potential role of CBKs in their strategy for care at birth. Development and testing of the decision support tool was a three-stage process involving an international expert group and country level testing. Stage 1, the development of the tool was undertaken by the Birth Kit Working Group and involved a review of the evidence, a consensus meeting, drafting of the proposed tool and expert review. In Stage 2 the tool was tested with users through interviews (9) and a focus group, with federal and provincial level decision makers in Pakistan. In Stage 3 the findings from the country level testing were reviewed by the expert group. The decision support tool comprised three separate algorithms to guide the policy maker or programme manager through the specific steps required in making the country level decision about whether to use CBKs. The algorithms were supported by a series of questions (that could be administered by interview, focus group or questionnaire) to help the decision maker identify the information needed. The country level testing revealed that the decision support tool was easy to follow and helpful in making decisions about the potential role of CBKs. Minor modifications were made and the final algorithms are presented. Testing of the tool with users in Pakistan suggests that the tool facilitates discussion and aids decision making. However, testing in other countries is needed to determine whether these results can be replicated and to identify how the tool can be adapted to meet country specific needs.

A Delphi study assessing the utility of quality improvement tools and resources in Australian primary care.

PubMed

Upham, Susan J; Janamian, Tina; Crossland, Lisa; Jackson, Claire L

2016-04-18

To determine the relevance and utility of online tools and resources to support organisational performance development in primary care and to complement the Primary Care Practice Improvement Tool (PC-PIT). A purposively recruited Expert Advisory Panel of 12 end users used a modified Delphi technique to evaluate 53 tools and resources identified through a previously conducted systematic review. The panel comprised six practice managers and six general practitioners who had participated in the PC-PIT pilot study in 2013-2014. Tools and resources were reviewed in three rounds using a standard pre-tested assessment form. Recommendations, scores and reasons for recommending or rejecting each tool or resource were analysed to determine the final suite of tools and resources. The evaluation was conducted from November 2014 to August 2015. Recommended tools and resources scored highly (mean score, 16/20) in Rounds 1 and 2 of review (n = 25). These tools and resources were perceived to be easily used, useful to the practice and supportive of the PC-PIT. Rejected resources scored considerably lower (mean score, 5/20) and were noted to have limitations such as having no value to the practice and poor utility (n = 6). A final review (Round 3) of 28 resources resulted in a suite of 21 to support the elements of the PC-PIT. This suite of tools and resources offers one approach to supporting the quality improvement initiatives currently in development in primary care reform.

Tool for use in lifting pin supported objects

NASA Technical Reports Server (NTRS)

Marzek, R. A.; Read, W. S. (Inventor)

1974-01-01

A tool for use in lifting a pin-supported, electronic package mounted in juxtaposition with the surface of an electronic circuit board is described. The tool is configured to be received beneath a pin-supported package and is characterized by a manually operable linkage, including an elongated, rigid link is supported for axial reciprocation and a pivotal link pinned to the body and supported for oscillation induced in response to axial motion imparted to the rigid link. A lifting plate is pivotally coupled to the distal end of the pivotal link so that oscillatory motion imparted to the pivotal link serves to move the plate vertically for elevating the plate into lifting engagement with the electronic package positioned thereabove.

From Workstation to Teacher Support System: A Tool to Increase Productivity.

ERIC Educational Resources Information Center

Chen, J. Wey

1989-01-01

Describes a teacher support system which is a computer-based workstation that provides support for teachers and administrators by integrating teacher utility programs, instructional management software, administrative packages, and office automation tools. Hardware is described and software components are explained, including database managers,…

The Changing Role of Instructors in Distance Education: Impact on Tool Support.

ERIC Educational Resources Information Center

Biedebach, Anke; Bomsdorf, Birgit; Schlageter, Gunter

At the university of Hagen a lot of experience exists in performing Web-based teaching and in implementing tools supporting e-learning. To share this knowledge, (inexperienced) instructors more and more ask for tool-based assistance in designing and administrating e-learning courses. Considering experience from other universities, it becomes…

Electronic Documentation Support Tools and Text Duplication in the Electronic Medical Record

ERIC Educational Resources Information Center

Wrenn, Jesse

2010-01-01

In order to ease the burden of electronic note entry on physicians, electronic documentation support tools have been developed to assist in note authoring. There is little evidence of the effects of these tools on attributes of clinical documentation, including document quality. Furthermore, the resultant abundance of duplicated text and…

A consumer guide: tools to manage vegetation and fuels.

Treesearch

David L. Peterson; Louisa Evers; Rebecca A. Gravenmier; Ellen Eberhardt

2007-01-01

Current efforts to improve the scientific basis for fire management on public lands will benefit from more efficient transfer of technical information and tools that support planning, implementation, and effectiveness of vegetation and hazardous fuel treatments. The technical scope, complexity, and relevant spatial scale of analytical and decision support tools differ...

Watershed Management Optimization Support Tool (WMOST) v1: User Manual and Case Study Examples

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is intended to be used as a screening tool as part of an integrated watershed management process such as that described in EPA’s watershed planning handbook (EPA 2008).1 The objective of WMOST is to serve as a public-doma...

Programming support environment issues in the Byron programming environment

NASA Technical Reports Server (NTRS)

Larsen, Matthew J.

1986-01-01

Issues are discussed which programming support environments need to address in order to successfully support software engineering. These concerns are divided into two categories. The first category, issues of how software development is supported by an environment, includes support of the full life cycle, methodology flexibility, and support of software reusability. The second category contains issues of how environments should operate, such as tool reusability and integration, user friendliness, networking, and use of a central data base. This discussion is followed by an examination of Byron, an Ada based programming support environment developed at Intermetrics, focusing on the solutions Byron offers to these problems, including the support provided for software reusability and the test and maintenance phases of the life cycle. The use of Byron in project development is described briefly, and some suggestions for future Byron tools and user written tools are presented.

Planning your pregnancy

MedlinePlus

... Participate & Support Make a donation Giving opportunities Our corporate partners In Your Area Tools & Resources Careers Events ... Participate & Support Make a donation Giving opportunities Our corporate partners In Your Area Tools & Resources Careers Events ...

Improving Tools and Processes in Mechanical Design Collaboration

NASA Technical Reports Server (NTRS)

Briggs, Clark

2009-01-01

Cooperative product development projects in the aerospace and defense industry are held hostage to high cost and risk due to poor alignment of collaborative design tools and processes. This impasse can be broken if companies will jointly develop implementation approaches and practices in support of high value working arrangements. The current tools can be used to better advantage in many situations and there is reason for optimism that tool vendors will provide significant support.

Structural Embeddings: Mechanization with Method

NASA Technical Reports Server (NTRS)

Munoz, Cesar; Rushby, John

1999-01-01

The most powerful tools for analysis of formal specifications are general-purpose theorem provers and model checkers, but these tools provide scant methodological support. Conversely, those approaches that do provide a well-developed method generally have less powerful automation. It is natural, therefore, to try to combine the better-developed methods with the more powerful general-purpose tools. An obstacle is that the methods and the tools often employ very different logics. We argue that methods are separable from their logics and are largely concerned with the structure and organization of specifications. We, propose a technique called structural embedding that allows the structural elements of a method to be supported by a general-purpose tool, while substituting the logic of the tool for that of the method. We have found this technique quite effective and we provide some examples of its application. We also suggest how general-purpose systems could be restructured to support this activity better.

Pushing and pulling: an assessment tool for occupational health and safety practitioners.

PubMed

Lind, Carl Mikael

2018-03-01

A tool has been developed for supporting practitioners when assessing manual pushing and pulling operations based on an initiative by two global companies in the manufacturing industry. The aim of the tool is to support occupational health and safety practitioners in risk assessment and risk management of pushing and pulling operations in the manufacturing and logistics industries. The tool is based on a nine-multiplier equation that includes a wide range of factors affecting an operator's health risk and capacity in pushing and pulling. These multipliers are based on psychophysical, physiological and biomechanical studies in combination with judgments from an expert group consisting of senior researchers and ergonomists. In order to consider usability, more than 50 occupational health and safety practitioners (e.g., ergonomists, managers, safety representatives and production personnel) participated in the development of the tool. An evaluation by 22 ergonomists supports that the push/pull tool is user friendly in general.

An Ada programming support environment

NASA Technical Reports Server (NTRS)

Tyrrill, AL; Chan, A. David

1986-01-01

The toolset of an Ada Programming Support Environment (APSE) being developed at North American Aircraft Operations (NAAO) of Rockwell International, is described. The APSE is resident on three different hosts and must support developments for the hosts and for embedded targets. Tools and developed software must be freely portable between the hosts. The toolset includes the usual editors, compilers, linkers, debuggers, configuration magnagers, and documentation tools. Generally, these are being supplied by the host computer vendors. Other tools, for example, pretty printer, cross referencer, compilation order tool, and management tools were obtained from public-domain sources, are implemented in Ada and are being ported to the hosts. Several tools being implemented in-house are of interest, these include an Ada Design Language processor based on compilable Ada. A Standalone Test Environment Generator facilitates test tool construction and partially automates unit level testing. A Code Auditor/Static Analyzer permits the Ada programs to be evaluated against measures of quality. An Ada Comment Box Generator partially automates generation of header comment boxes.

A user's guide to coping with estuarine management bureaucracy: An Estuarine Planning Support System (EPSS) tool.

PubMed

Lonsdale, Jemma; Nicholson, Rose; Weston, Keith; Elliott, Michael; Birchenough, Andrew; Sühring, Roxana

2018-02-01

Estuaries are amongst the most socio-economically and ecologically important environments however, due to competing and conflicting demands, management is often challenging with a complex legislative framework managed by multiple agencies. To facilitate the understanding of this legislative framework, we have developed a GISbased Estuarine Planning Support System tool. The tool integrates the requirements of the relevant legislation and provides a basis for assessing the current environmental state of an estuary as well as informing and assessing new plans to ensure a healthy estuarine state. The tool ensures that the information is easily accessible for regulators, managers, developers and the public. The tool is intended to be adaptable, but is assessed using the Humber Estuary, United Kingdom as a case study area. The successful application of the tool for complex socio-economic and environmental systems demonstrates that the tool can efficiently guide users through the complex requirements needed to support sustainable development. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

WMOST 2.0 Download Page

EPA Pesticide Factsheets

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of managemen

WMOST 3.0 Download Page

EPA Pesticide Factsheets

The Watershed Management Optimization Support Tool (WMOST) is a decision support tool that facilitates integrated water management at the local or small watershed scale. WMOST models the environmental effects and costs of management.

Evaluation of the Effectiveness of Stormwater Decision Support Tools for Infrastructure Selection and the Barriers to Implementation

NASA Astrophysics Data System (ADS)

Spahr, K.; Hogue, T. S.

2016-12-01

Selecting the most appropriate green, gray, and / or hybrid system for stormwater treatment and conveyance can prove challenging to decision markers across all scales, from site managers to large municipalities. To help streamline the selection process, a multi-disciplinary team of academics and professionals is developing an industry standard for selecting and evaluating the most appropriate stormwater management technology for different regions. To make the tool more robust and comprehensive, life-cycle cost assessment and optimization modules will be included to evaluate non-monetized and ecosystem benefits of selected technologies. Initial work includes surveying advisory board members based in cities that use existing decision support tools in their infrastructure planning process. These surveys will qualify the decisions currently being made and identify challenges within the current planning process across a range of hydroclimatic regions and city size. Analysis of social and other non-technical barriers to adoption of the existing tools is also being performed, with identification of regional differences and institutional challenges. Surveys will also gage the regional appropriateness of certain stormwater technologies based off experiences in implementing stormwater treatment and conveyance plans. In additional to compiling qualitative data on existing decision support tools, a technical review of components of the decision support tool used will be performed. Gaps in each tool's analysis, like the lack of certain critical functionalities, will be identified and ease of use will be evaluated. Conclusions drawn from both the qualitative and quantitative analyses will be used to inform the development of the new decision support tool and its eventual dissemination.

Indicators and Measurement Tools for Health Systems Integration: A Knowledge Synthesis

PubMed Central

Oelke, Nelly D.; da Silva Lima, Maria Alice Dias; Stiphout, Michelle; Janke, Robert; Witt, Regina Rigatto; Van Vliet-Brown, Cheryl; Schill, Kaela; Rostami, Mahnoush; Hepp, Shelanne; Birney, Arden; Al-Roubaiai, Fatima; Marques, Giselda Quintana

2017-01-01

Background: Despite far reaching support for integrated care, conceptualizing and measuring integrated care remains challenging. This knowledge synthesis aimed to identify indicator domains and tools to measure progress towards integrated care. Methods: We used an established framework and a Delphi survey with integration experts to identify relevant measurement domains. For each domain, we searched and reviewed the literature for relevant tools. Findings: From 7,133 abstracts, we retrieved 114 unique tools. We found many quality tools to measure care coordination, patient engagement and team effectiveness/performance. In contrast, there were few tools in the domains of performance measurement and information systems, alignment of organizational goals and resource allocation. The search yielded 12 tools that measure overall integration or three or more indicator domains. Discussion: Our findings highlight a continued gap in tools to measure foundational components that support integrated care. In the absence of such targeted tools, “overall integration” tools may be useful for a broad assessment of the overall state of a system. Conclusions: Continued progress towards integrated care depends on our ability to evaluate the success of strategies across different levels and context. This study has identified 114 tools that measure integrated care across 16 domains, supporting efforts towards a unified measurement framework. PMID:29588637

Supporting Dynamic Ad hoc Collaboration Capabilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, Deborah A.; Berket, Karlo

2003-07-14

Modern HENP experiments such as CMS and Atlas involve as many as 2000 collaborators around the world. Collaborations this large will be unable to meet often enough to support working closely together. Many of the tools currently available for collaboration focus on heavy-weight applications such as videoconferencing tools. While these are important, there is a more basic need for tools that support connecting physicists to work together on an ad hoc or continuous basis. Tools that support the day-to-day connectivity and underlying needs of a group of collaborators are important for providing light-weight, non-intrusive, and flexible ways to work collaboratively.more » Some example tools include messaging, file-sharing, and shared plot viewers. An important component of the environment is a scalable underlying communication framework. In this paper we will describe our current progress on building a dynamic and ad hoc collaboration environment and our vision for its evolution into a HENP collaboration environment.« less

Coordinating complex decision support activities across distributed applications

NASA Technical Reports Server (NTRS)

Adler, Richard M.

1994-01-01

Knowledge-based technologies have been applied successfully to automate planning and scheduling in many problem domains. Automation of decision support can be increased further by integrating task-specific applications with supporting database systems, and by coordinating interactions between such tools to facilitate collaborative activities. Unfortunately, the technical obstacles that must be overcome to achieve this vision of transparent, cooperative problem-solving are daunting. Intelligent decision support tools are typically developed for standalone use, rely on incompatible, task-specific representational models and application programming interfaces (API's), and run on heterogeneous computing platforms. Getting such applications to interact freely calls for platform independent capabilities for distributed communication, as well as tools for mapping information across disparate representations. Symbiotics is developing a layered set of software tools (called NetWorks! for integrating and coordinating heterogeneous distributed applications. he top layer of tools consists of an extensible set of generic, programmable coordination services. Developers access these services via high-level API's to implement the desired interactions between distributed applications.

Midlevel Maternity Providers' Preferences of a Childbirth Monitoring Tool in Low-Income Health Units in Uganda.

PubMed

Balikuddembe, Michael S; Wakholi, Peter K; Tumwesigye, Nazarius M; Tylleskär, Thorkild

2018-01-01

A third of women in childbirth are inadequately monitored, partly due to the tools used. Some stakeholders assert that the current labour monitoring tools are not efficient and need improvement to become more relevant to childbirth attendants. The study objective was to explore the expectations of maternity service providers for a mobile childbirth monitoring tool in maternity facilities in a low-income country like Uganda. Semi-structured interviews of purposively selected midwives and doctors in rural-urban childbirth facilities in Uganda were conducted before thematic data analysis. The childbirth providers expected a tool that enabled fast and secure childbirth record storage and sharing. They desired a tool that would automatically and conveniently register patient clinical findings, and actively provide interactive clinical decision support on a busy ward. The tool ought to support agreed upon standards for good pregnancy outcomes but also adaptable to the patient and their difficult working conditions. The tool functionality should include clinical data management and real-time decision support to the midwives, while the non-functional attributes include versatility and security.

Using Performance Tools to Support Experiments in HPC Resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naughton, III, Thomas J; Boehm, Swen; Engelmann, Christian

2014-01-01

The high performance computing (HPC) community is working to address fault tolerance and resilience concerns for current and future large scale computing platforms. This is driving enhancements in the programming environ- ments, specifically research on enhancing message passing libraries to support fault tolerant computing capabilities. The community has also recognized that tools for resilience experimentation are greatly lacking. However, we argue that there are several parallels between performance tools and resilience tools . As such, we believe the rich set of HPC performance-focused tools can be extended (repurposed) to benefit the resilience community. In this paper, we describe the initialmore » motivation to leverage standard HPC per- formance analysis techniques to aid in developing diagnostic tools to assist fault tolerance experiments for HPC applications. These diagnosis procedures help to provide context for the system when the errors (failures) occurred. We describe our initial work in leveraging an MPI performance trace tool to assist in provid- ing global context during fault injection experiments. Such tools will assist the HPC resilience community as they extend existing and new application codes to support fault tolerances.« less

BASINs 4.0 Climate Assessment Tool (CAT): Supporting ...

EPA Pesticide Factsheets

EPA announced the availability of the report, BASINS 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual. This report was prepared by the EPA's Global Change Research Program (GCRP), an assessment-oriented program, that sits within the Office of Research and Development, that focuses on assessing how potential changes in climate and other global environmental stressors may impact water quality, air quality, aquatic ecosystems, and human health in the United States. The Program’s focus on water quality is consistent with the Research Strategy of the U.S. Climate Change Research Program—the federal umbrella organization for climate change science in the U.S. government—and is responsive to U.S. EPA’s mission and responsibilities as defined by the Clean Water Act and the Safe Drinking Water Act. A central goal of the EPA GCRP is to provide EPA program offices, Regions, and other stakeholders with tools and information for assessing and responding to any potential future impacts of climate change. In 2007, the EPA Global Change Research Program (GCRP), in partnership with the EPA Office of Water, supported development of a Climate Assessment Tool (CAT) for version 4 of EPA’s BASINS modeling system. This report provides supporting documentation and user support materials for the BASINS CAT tool. The purpose of this report is to provide in a single document a variety of documentation and user support materials supporting the use

eCDRweb User Guide–Primary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) e-CDR web tool. E-CDRweb is the electronic, web-based tool provided by the Environmental Protection Agency (EPA) for the submission of Chemical Data Reporting (CDR) information. This document is the user guide for the Primary Support user of the e-CDRweb tool.

Supporting Faculty in the Design and Structuring of Web-Based Courses.

ERIC Educational Resources Information Center

Freeman, H.; Ryan, S.; Boys, J.

This paper reports on the development and extension of a concept mapping tool into a complete online course design support framework for academics: CEDOT (Course Elicitation, Development and Output Tool). The tool provides a course design framework that faculty work through in an order of their choosing. It gives context specific help and advice…

A Decision Support Model and Tool to Assist Financial Decision-Making in Universities

ERIC Educational Resources Information Center

Bhayat, Imtiaz; Manuguerra, Maurizio; Baldock, Clive

2015-01-01

In this paper, a model and tool is proposed to assist universities and other mission-based organisations to ascertain systematically the optimal portfolio of projects, in any year, meeting the organisations risk tolerances and available funds. The model and tool presented build on previous work on university operations and decision support systems…

eCDRweb User Guide–Secondary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) e-CDR web tool. E-CDRweb is the electronic, web-based tool provided by the Environmental Protection Agency (EPA) for the submission of Chemical Data Reporting (CDR) information. This document is the user guide for the Secondary Support user of the e-CDRweb tool.

A Case Study of Using a Social Annotation Tool to Support Collaboratively Learning

ERIC Educational Resources Information Center

Gao, Fei

2013-01-01

The purpose of the study was to understand student interaction and learning supported by a collaboratively social annotation tool--Diigo. The researcher examined through a case study how students participated and interacted when learning an online text with the social annotation tool--Diigo, and how they perceived their experience. The findings…

Audio-video decision support for patients: the documentary genré as a basis for decision aids.

PubMed

Volandes, Angelo E; Barry, Michael J; Wood, Fiona; Elwyn, Glyn

2013-09-01

Decision support tools are increasingly using audio-visual materials. However, disagreement exists about the use of audio-visual materials as they may be subjective and biased. This is a literature review of the major texts for documentary film studies to extrapolate issues of objectivity and bias from film to decision support tools. The key features of documentary films are that they attempt to portray real events and that the attempted reality is always filtered through the lens of the filmmaker. The same key features can be said of decision support tools that use audio-visual materials. Three concerns arising from documentary film studies as they apply to the use of audio-visual materials in decision support tools include whose perspective matters (stakeholder bias), how to choose among audio-visual materials (selection bias) and how to ensure objectivity (editorial bias). Decision science needs to start a debate about how audio-visual materials are to be used in decision support tools. Simply because audio-visual materials may be subjective and open to bias does not mean that we should not use them. Methods need to be found to ensure consensus around balance and editorial control, such that audio-visual materials can be used. © 2011 John Wiley & Sons Ltd.

Audio‐video decision support for patients: the documentary genré as a basis for decision aids

PubMed Central

Volandes, Angelo E.; Barry, Michael J.; Wood, Fiona; Elwyn, Glyn

2011-01-01

Abstract Objective  Decision support tools are increasingly using audio‐visual materials. However, disagreement exists about the use of audio‐visual materials as they may be subjective and biased. Methods  This is a literature review of the major texts for documentary film studies to extrapolate issues of objectivity and bias from film to decision support tools. Results  The key features of documentary films are that they attempt to portray real events and that the attempted reality is always filtered through the lens of the filmmaker. The same key features can be said of decision support tools that use audio‐visual materials. Three concerns arising from documentary film studies as they apply to the use of audio‐visual materials in decision support tools include whose perspective matters (stakeholder bias), how to choose among audio‐visual materials (selection bias) and how to ensure objectivity (editorial bias). Discussion  Decision science needs to start a debate about how audio‐visual materials are to be used in decision support tools. Simply because audio‐visual materials may be subjective and open to bias does not mean that we should not use them. Conclusion  Methods need to be found to ensure consensus around balance and editorial control, such that audio‐visual materials can be used. PMID:22032516

Managing and Communicating Operational Workflow: Designing and Implementing an Electronic Outpatient Whiteboard.

PubMed

Steitz, Bryan D; Weinberg, Stuart T; Danciu, Ioana; Unertl, Kim M

2016-01-01

Healthcare team members in emergency department contexts have used electronic whiteboard solutions to help manage operational workflow for many years. Ambulatory clinic settings have highly complex operational workflow, but are still limited in electronic assistance to communicate and coordinate work activities. To describe and discuss the design, implementation, use, and ongoing evolution of a coordination and collaboration tool supporting ambulatory clinic operational workflow at Vanderbilt University Medical Center (VUMC). The outpatient whiteboard tool was initially designed to support healthcare work related to an electronic chemotherapy order-entry application. After a highly successful initial implementation in an oncology context, a high demand emerged across the organization for the outpatient whiteboard implementation. Over the past 10 years, developers have followed an iterative user-centered design process to evolve the tool. The electronic outpatient whiteboard system supports 194 separate whiteboards and is accessed by over 2800 distinct users on a typical day. Clinics can configure their whiteboards to support unique workflow elements. Since initial release, features such as immunization clinical decision support have been integrated into the system, based on requests from end users. The success of the electronic outpatient whiteboard demonstrates the usefulness of an operational workflow tool within the ambulatory clinic setting. Operational workflow tools can play a significant role in supporting coordination, collaboration, and teamwork in ambulatory healthcare settings.

Sustainability Tools Inventory - Initial Gaps Analysis | Science ...

EPA Pesticide Factsheets

This report identifies a suite of tools that address a comprehensive set of community sustainability concerns. The objective is to discover whether "gaps" exist in the tool suite’s analytic capabilities. These tools address activities that significantly influence resource consumption, waste generation, and hazard generation including air pollution and greenhouse gases. In addition, the tools have been evaluated using four screening criteria: relevance to community decision making, tools in an appropriate developmental stage, tools that may be transferrable to situations useful for communities, and tools with requiring skill levels appropriate to communities. This document provides an initial gap analysis in the area of community sustainability decision support tools. It provides a reference to communities for existing decision support tools, and a set of gaps for those wishing to develop additional needed tools to help communities to achieve sustainability. It contributes to SHC 1.61.4

Supporting Collaborative Inquiry during a Biology Field Trip with Mobile Peer-to-Peer Tools for Learning: A Case Study with K-12 Learners

ERIC Educational Resources Information Center

Laru, Jari; Jarvela, Sanna; Clariana, Roy B.

2012-01-01

This study explores how collaborative inquiry learning can be supported with multiple scaffolding agents in a real-life field trip context. In practice, a mobile peer-to-peer messaging tool provided meta-cognitive and procedural support, while tutors and a nature guide provided more dynamic scaffolding in order to support argumentative discussions…

Pilot study of a point-of-use decision support tool for cancer clinical trials eligibility.

PubMed

Breitfeld, P P; Weisburd, M; Overhage, J M; Sledge, G; Tierney, W M

1999-01-01

Many adults with cancer are not enrolled in clinical trials because caregivers do not have the time to match the patient's clinical findings with varying eligibility criteria associated with multiple trials for which the patient might be eligible. The authors developed a point-of-use portable decision support tool (DS-TRIEL) to automate this matching process. The support tool consists of a hand-held computer with a programmable relational database. A two-level hierarchic decision framework was used for the identification of eligible subjects for two open breast cancer clinical trials. The hand-held computer also provides protocol consent forms and schemas to further help the busy oncologist. This decision support tool and the decision framework on which it is based could be used for multiple trials and different cancer sites.

Pilot Study of a Point-of-use Decision Support Tool for Cancer Clinical Trials Eligibility

PubMed Central

Breitfeld, Philip P.; Weisburd, Marina; Overhage, J. Marc; Sledge, George; Tierney, William M.

1999-01-01

Many adults with cancer are not enrolled in clinical trials because caregivers do not have the time to match the patient's clinical findings with varying eligibility criteria associated with multiple trials for which the patient might be eligible. The authors developed a point-of-use portable decision support tool (DS-TRIEL) to automate this matching process. The support tool consists of a hand-held computer with a programmable relational database. A two-level hierarchic decision framework was used for the identification of eligible subjects for two open breast cancer clinical trials. The hand-held computer also provides protocol consent forms and schemas to further help the busy oncologist. This decision support tool and the decision framework on which it is based could be used for multiple trials and different cancer sites. PMID:10579605

Nursing informatics, outcomes, and quality improvement.

PubMed

Charters, Kathleen G

2003-08-01

Nursing informatics actively supports nursing by providing standard language systems, databases, decision support, readily accessible research results, and technology assessments. Through normalized datasets spanning an entire enterprise or other large demographic, nursing informatics tools support improvement of healthcare by answering questions about patient outcomes and quality improvement on an enterprise scale, and by providing documentation for business process definition, business process engineering, and strategic planning. Nursing informatics tools provide a way for advanced practice nurses to examine their practice and the effect of their actions on patient outcomes. Analysis of patient outcomes may lead to initiatives for quality improvement. Supported by nursing informatics tools, successful advance practice nurses leverage their quality improvement initiatives against the enterprise strategic plan to gain leadership support and resources.

Ulcerative colitis outpatient management: development and evaluation of tools to support primary care practitioners.

PubMed

Bennett, A L; Buckton, S; Lawrance, I; Leong, R W; Moore, G; Andrews, J M

2015-12-01

Current models of care for ulcerative colitis (UC) across healthcare systems are inconsistent with a paucity of existing guidelines or supportive tools for outpatient management. This study aimed to produce and evaluate evidence-based outpatient management tools for UC to guide primary care practitioners and patients in clinical decision-making. Three tools were developed after identifying current gaps in the provision of healthcare services for patients with UC at a Clinical Insights Meeting in 2013. Draft designs were further refined through consultation and consolidation of feedback by the steering committee. Final drafts were developed following feasibility testing in three key stakeholder groups (gastroenterologists, general practitioners and patients) by questionnaire. The tools were officially launched into mainstream use in Australia in 2014. Three quarters of all respondents liked the layout and content of each tool. Minimal safety concerns were aired and those, along with pieces of information that were felt to be omitted, that were reviewed by the steering committee and incorporated into the final documents. The majority (over 80%) of respondents felt that the tools would be useful and would improve outpatient management of UC. Evidence-based outpatient clinical management tools for UC can be developed. The concept and end-product have been well received by all stakeholder groups. These tools should support non-specialist clinicians to optimise UC management and empower patients by facilitating them to safely self-manage and identify when medical support is needed. © 2015 Royal Australasian College of Physicians.

Building Internet-Based Electronic Performance Support for Teaching and Learning.

ERIC Educational Resources Information Center

Laffey, James M.; Musser, Dale

The College of Education, University of Missouri-Columbia is developing and testing a suite of tools that utilize the Internet and work as a system to support learning from field experiences. These tools are built to support preservice teachers, field-based mentors, and college faculty as they collaborate, engage in practice, document their…

Migrants and Mobile Technology Use: Gaps in the Support Provided by Current Tools

ERIC Educational Resources Information Center

Epp, Carrie Demmans

2017-01-01

Our current understanding of how migrants use mobile tools to support their communication and language learning is inadequate. This study, therefore, explores the learner-initiated use of technologies to support their comprehension, production, and acquisition of English following migration to Canada. Information about migrant use of technologies…

Information and communication technology to support self-management of patients with mild acquired cognitive impairments: systematic review.

PubMed

Eghdam, Aboozar; Scholl, Jeremiah; Bartfai, Aniko; Koch, Sabine

2012-11-19

Mild acquired cognitive impairment (MACI) is a new term used to describe a subgroup of patients with mild cognitive impairment (MCI) who are expected to reach a stable cognitive level over time. This patient group is generally young and have acquired MCI from a head injury or mild stroke. Although the past decade has seen a large amount of research on how to use information and communication technology (ICT) to support self-management of patients with chronic diseases, MACI has not received much attention. Therefore, there is a lack of information about what tools have been created and evaluated that are suitable for self-management of MACI patients, and a lack of clear direction on how best to proceed with ICT tools to support self-management of MACI patients. This paper aims to provide direction for further research and development of tools that can support health care professionals in assisting MACI patients with self-management. An overview of studies reporting on the design and/or evaluation of ICT tools for assisting MACI patients in self-management is presented. We also analyze the evidence of benefit provided by these tools, and how their functionality matches MACI patients' needs to determine areas of interest for further research and development. A review of the existing literature about available assistive ICT tools for MACI patients was conducted using 8 different medical, scientific, engineering, and physiotherapy library databases. The functionality of tools was analyzed using an analytical framework based on the International Classification of Functioning, Disability and Health (ICF) and a subset of common and important problems for patients with MACI created by MACI experts in Sweden. A total of 55 search phrases applied in the 8 databases returned 5969 articles. After review, 7 articles met the inclusion criteria. Most articles reported case reports and exploratory research. Out of the 7 articles, 4 (57%) studies had less than 10 participants, 5 (71%) technologies were memory aids, and 6 studies were mobile technologies. All 7 studies fit the profile for patients with MACI as described by our analytical framework. However, several areas in the framework important for meeting patient needs were not covered by the functionality in any of the ICT tools. This study shows a lack of ICT tools developed and evaluated for supporting self-management of MACI patients. Our analytical framework was a valuable tool for providing an overview of how the functionality of these tools matched patient needs. There are a number of important areas for MACI patients that are not covered by the functionality of existing tools, such as support for interpersonal interactions and relationships. Further research on ICT tools to support self-management for patients with MACI is needed.

Software development environments: Status and trends

NASA Technical Reports Server (NTRS)

Duffel, Larry E.

1988-01-01

Currently software engineers are the essential integrating factors tying several components together. The components consist of process, methods, computers, tools, support environments, and software engineers. The engineers today empower the tools versus the tools empowering the engineers. Some of the issues in software engineering are quality, managing the software engineering process, and productivity. A strategy to accomplish this is to promote the evolution of software engineering from an ad hoc, labor intensive activity to a managed, technology supported discipline. This strategy may be implemented by putting the process under management control, adopting appropriate methods, inserting the technology that provides automated support for the process and methods, collecting automated tools into an integrated environment and educating the personnel.

Usability of Operational Performance Support Tools - Findings from Sea Test II

NASA Technical Reports Server (NTRS)

Byrne, Vicky; Litaker, Harry; McGuire, Kerry

2014-01-01

Sea Test II, aka NASA Extreme Environment Mission Operations 17(NEEMO 17) took place in the Florida Aquarius undersea habitat. This confined underwater environment provides a excellent analog for space habitation providing similarities to space habitation such as hostile environment, difficult logistics, autonomous operations, and remote communications. This study collected subjective feedback on the usability of two performance support tools during the Sea Test II mission, Sept 10-14, 2013; Google Glass and iPAD. The two main objectives: - Assess the overall functionality and usability of each performance support tool in a mission analog environment. - Assess the advantages and disadvantages of each tool when performing operational procedures and Just-In-Time-Training (JITT).

Invited review: Helping dairy farmers to improve economic performance utilizing data-driving decision support tools.

PubMed

Cabrera, V E

2018-01-01

The objective of this review paper is to describe the development and application of a suite of more than 40 computerized dairy farm decision support tools contained at the University of Wisconsin-Madison (UW) Dairy Management website http://DairyMGT.info. These data-driven decision support tools are aimed to help dairy farmers improve their decision-making, environmental stewardship and economic performance. Dairy farm systems are highly dynamic in which changing market conditions and prices, evolving policies and environmental restrictions together with every time more variable climate conditions determine performance. Dairy farm systems are also highly integrated with heavily interrelated components such as the dairy herd, soils, crops, weather and management. Under these premises, it is critical to evaluate a dairy farm following a dynamic integrated system approach. For this approach, it is crucial to use meaningful data records, which are every time more available. These data records should be used within decision support tools for optimal decision-making and economic performance. Decision support tools in the UW-Dairy Management website (http://DairyMGT.info) had been developed using combination and adaptation of multiple methods together with empirical techniques always with the primary goal for these tools to be: (1) highly user-friendly, (2) using the latest software and computer technologies, (3) farm and user specific, (4) grounded on the best scientific information available, (5) remaining relevant throughout time and (6) providing fast, concrete and simple answers to complex farmers' questions. DairyMGT.info is a translational innovative research website in various areas of dairy farm management that include nutrition, reproduction, calf and heifer management, replacement, price risk and environment. This paper discusses the development and application of 20 selected (http://DairyMGT.info) decision support tools.

The eXtensible ontology development (XOD) principles and tool implementation to support ontology interoperability.

PubMed

He, Yongqun; Xiang, Zuoshuang; Zheng, Jie; Lin, Yu; Overton, James A; Ong, Edison

2018-01-12

Ontologies are critical to data/metadata and knowledge standardization, sharing, and analysis. With hundreds of biological and biomedical ontologies developed, it has become critical to ensure ontology interoperability and the usage of interoperable ontologies for standardized data representation and integration. The suite of web-based Ontoanimal tools (e.g., Ontofox, Ontorat, and Ontobee) support different aspects of extensible ontology development. By summarizing the common features of Ontoanimal and other similar tools, we identified and proposed an "eXtensible Ontology Development" (XOD) strategy and its associated four principles. These XOD principles reuse existing terms and semantic relations from reliable ontologies, develop and apply well-established ontology design patterns (ODPs), and involve community efforts to support new ontology development, promoting standardized and interoperable data and knowledge representation and integration. The adoption of the XOD strategy, together with robust XOD tool development, will greatly support ontology interoperability and robust ontology applications to support data to be Findable, Accessible, Interoperable and Reusable (i.e., FAIR).

Designing a data-driven decision support tool for nurse scheduling in the emergency department: a case study of a southern New Jersey emergency department.

PubMed

Otegbeye, Mojisola; Scriber, Roslyn; Ducoin, Donna; Glasofer, Amy

2015-01-01

A health system serving Burlington and Camden Counties, New Jersey, sought to improve labor productivity for its emergency departments, with emphasis on optimizing nursing staff schedules. Using historical emergency department visit data and operating constraints, a decision support tool was designed to recommend the number of emergency nurses needed in each hour for each day of the week. The pilot emergency department nurse managers used the decision support tool's recommendations to redeploy nurse hours from weekends into a float pool to support periods of demand spikes on weekdays. Productivity improved significantly, with no unfavorable impact on patient throughput, and patient and staff satisfaction. Today's emergency department manager can leverage the increasing ease of access to the emergency department information system's data repository to successfully design a simple but effective tool to support the alignment of its nursing schedule with demand patterns. Copyright © 2015 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

Watershed Management Optimization Support Tool (WMOST) Webinar

EPA Science Inventory

This webinar will highlight version 3 of EPA’s Watershed Management Optimization Support Tool (WMOST). WMOST facilitates implementation of integrated water management by communities, utilities, watershed management organizations, consultants, and others. There can be many o...

Evaluating online diagnostic decision support tools for the clinical setting.

PubMed

Pryor, Marie; White, David; Potter, Bronwyn; Traill, Roger

2012-01-01

Clinical decision support tools available at the point of care are an effective adjunct to support clinicians to make clinical decisions and improve patient outcomes. We developed a methodology and applied it to evaluate commercially available online clinical diagnostic decision support (DDS) tools for use at the point of care. We identified 11 commercially available DDS tools and assessed these against an evaluation instrument that included 6 categories; general information, content, quality control, search, clinical results and other features. We developed diagnostically challenging clinical case scenarios based on real patient experience that were commonly missed by junior medical staff. The evaluation was divided into 2 phases; an initial evaluation of all identified and accessible DDS tools conducted by the Clinical Information Access Portal (CIAP) team and a second phase that further assessed the top 3 tools identified in the initial evaluation phase. An evaluation panel consisting of senior and junior medical clinicians from NSW Health conducted the second phase. Of the eleven tools that were assessed against the evaluation instrument only 4 tools completely met the DDS definition that was adopted for this evaluation and were able to produce a differential diagnosis. From the initial phase of the evaluation 4 DDS tools scored 70% or more (maximum score 96%) for the content category, 8 tools scored 65% or more (maximum 100%) for the quality control category, 5 tools scored 65% or more (maximum 94%) for the search category, and 4 tools score 70% or more (maximum 81%) for the clinical results category. The second phase of the evaluation was focused on assessing diagnostic accuracy for the top 3 tools identified in the initial phase. Best Practice ranked highest overall against the 6 clinical case scenarios used. Overall the differentiating factor between the top 3 DDS tools was determined by diagnostic accuracy ranking, ease of use and the confidence and credibility of the clinical information. The evaluation methodology used here to assess the quality and comprehensiveness of clinical DDS tools was effective in identifying the most appropriate tool for the clinical setting. The use of clinical case scenarios is fundamental in determining the diagnostic accuracy and usability of the tools.

Using Web Database Tools To Facilitate the Construction of Knowledge in Online Courses.

ERIC Educational Resources Information Center

McNeil, Sara G.; Robin, Bernard R.

This paper presents an overview of database tools that dynamically generate World Wide Web materials and focuses on the use of these tools to support research activities, as well as teaching and learning. Database applications have been used in classrooms to support learning activities for over a decade, but, although business and e-commerce have…

Phytophthora database 2.0: update and future direction.

PubMed

Park, Bongsoo; Martin, Frank; Geiser, David M; Kim, Hye-Seon; Mansfield, Michele A; Nikolaeva, Ekaterina; Park, Sook-Young; Coffey, Michael D; Russo, Joseph; Kim, Seong H; Balci, Yilmaz; Abad, Gloria; Burgess, Treena; Grünwald, Niklaus J; Cheong, Kyeongchae; Choi, Jaeyoung; Lee, Yong-Hwan; Kang, Seogchan

2013-12-01

The online community resource Phytophthora database (PD) was developed to support accurate and rapid identification of Phytophthora and to help characterize and catalog the diversity and evolutionary relationships within the genus. Since its release in 2008, the sequence database has grown to cover 1 to 12 loci for ≈2,600 isolates (representing 138 described and provisional species). Sequences of multiple mitochondrial loci were added to complement nuclear loci-based phylogenetic analyses and diagnostic tool development. Key characteristics of most newly described and provisional species have been summarized. Other additions to improve the PD functionality include: (i) geographic information system tools that enable users to visualize the geographic origins of chosen isolates on a global-scale map, (ii) a tool for comparing genetic similarity between isolates via microsatellite markers to support population genetic studies, (iii) a comprehensive review of molecular diagnostics tools and relevant references, (iv) sequence alignments used to develop polymerase chain reaction-based diagnostics tools to support their utilization and new diagnostic tool development, and (v) an online community forum for sharing and preserving experience and knowledge accumulated in the global Phytophthora community. Here we present how these improvements can support users and discuss the PD's future direction.

Combat Service Support (CSS) Enabler Functional Assessment (CEFA)

DTIC Science & Technology

1998-07-01

CDR), Combined Arms Support Command (CASCOM) with a tool to aid decision making related to mitigating E/I peacetime (programmatic) and wartime risks...not be fielded by Fiscal Year (FY) 10. Based on their estimates, any decisions , especially reductions in manpower, which rely on the existence of the E...Support (CSS) enablers/initiatives (E/I), thereby providing the Commander (CDR), Combined Arms Support Command (CASCOM) with a tool to aid decision

Analysis of Ten Reverse Engineering Tools

NASA Astrophysics Data System (ADS)

Koskinen, Jussi; Lehmonen, Tero

Reverse engineering tools can be used in satisfying the information needs of software maintainers. Especially in case of maintaining large-scale legacy systems tool support is essential. Reverse engineering tools provide various kinds of capabilities to provide the needed information to the tool user. In this paper we analyze the provided capabilities in terms of four aspects: provided data structures, visualization mechanisms, information request specification mechanisms, and navigation features. We provide a compact analysis of ten representative reverse engineering tools for supporting C, C++ or Java: Eclipse Java Development Tools, Wind River Workbench (for C and C++), Understand (for C++), Imagix 4D, Creole, Javadoc, Javasrc, Source Navigator, Doxygen, and HyperSoft. The results of the study supplement the earlier findings in this important area.

An integrated modeling and design tool for advanced optical spacecraft

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.

1992-01-01

Consideration is given to the design and status of the Integrated Modeling of Optical Systems (IMOS) tool and to critical design issues. A multidisciplinary spacecraft design and analysis tool with support for structural dynamics, controls, thermal analysis, and optics, IMOS provides rapid and accurate end-to-end performance analysis, simulations, and optimization of advanced space-based optical systems. The requirements for IMOS-supported numerical arrays, user defined data structures, and a hierarchical data base are outlined, and initial experience with the tool is summarized. A simulation of a flexible telescope illustrates the integrated nature of the tools.

Quality tools and resources to support organisational improvement integral to high-quality primary care: a systematic review of published and grey literature.

PubMed

Janamian, Tina; Upham, Susan J; Crossland, Lisa; Jackson, Claire L

2016-04-18

To conduct a systematic review of the literature to identify existing online primary care quality improvement tools and resources to support organisational improvement related to the seven elements in the Primary Care Practice Improvement Tool (PC-PIT), with the identified tools and resources to progress to a Delphi study for further assessment of relevance and utility. Systematic review of the international published and grey literature. CINAHL, Embase and PubMed databases were searched in March 2014 for articles published between January 2004 and December 2013. GreyNet International and other relevant websites and repositories were also searched in March-April 2014 for documents dated between 1992 and 2012. All citations were imported into a bibliographic database. Published and unpublished tools and resources were included in the review if they were in English, related to primary care quality improvement and addressed any of the seven PC-PIT elements of a high-performing practice. Tools and resources that met the eligibility criteria were then evaluated for their accessibility, relevance, utility and comprehensiveness using a four-criteria appraisal framework. We used a data extraction template to systematically extract information from eligible tools and resources. A content analysis approach was used to explore the tools and resources and collate relevant information: name of the tool or resource, year and country of development, author, name of the organisation that provided access and its URL, accessibility information or problems, overview of each tool or resource and the quality improvement element(s) it addresses. If available, a copy of the tool or resource was downloaded into the bibliographic database, along with supporting evidence (published or unpublished) on its use in primary care. This systematic review identified 53 tools and resources that can potentially be provided as part of a suite of tools and resources to support primary care practices in improving the quality of their practice, to achieve improved health outcomes.

The Integrated Medical Model: A Decision Support Tool for In-flight Crew Health Care

NASA Technical Reports Server (NTRS)

Butler, Doug

2009-01-01

This viewgraph presentation reviews the development of an Integrated Medical Model (IMM) decision support tool for in-flight crew health care safety. Clinical methods, resources, and case scenarios are also addressed.

2016 eCDRweb User Guide–Primary Support

EPA Pesticide Factsheets

This document presents the user guide for the Office of Pollution Prevention and Toxics’ (OPPT) 2016 e-CDR web tool. This document is the user guide for the Primary Support user of the 2016 e-CDRweb tool.

Innovative methods and tools for professionals working in supported living services for intellectually disabled persons.

PubMed

Gruiz, Katalin

2015-01-01

Autonomy of mid-seriously and seriously intellectually disabled persons is encouraged both by legislations on human rights and the modern social care and services. The process leading to the maximum possible autonomy is illustrated by a developmental spiral in our model. Specialty of the development is that the personal educational projects are realized during everyday activities. The process requires conscious professionals with an empowering and motivating attitude, with adult relationship to the intellectually disabled persons and versatile skills and tools. In this educational relationship the social professional and the supported person are equal partners moving together along the spiral of human development. An innovative tool-battery has been developed aiding support-staff in the 'pedagogical' task embedded into everyday social services. The tool-battery and its first application in supported living services of the Hungarian Down Foundation are introduced in this paper.

Risk assessment of sewer condition using artificial intelligence tools: application to the SANEST sewer system.

PubMed

Sousa, V; Matos, J P; Almeida, N; Saldanha Matos, J

2014-01-01

Operation, maintenance and rehabilitation comprise the main concerns of wastewater infrastructure asset management. Given the nature of the service provided by a wastewater system and the characteristics of the supporting infrastructure, technical issues are relevant to support asset management decisions. In particular, in densely urbanized areas served by large, complex and aging sewer networks, the sustainability of the infrastructures largely depends on the implementation of an efficient asset management system. The efficiency of such a system may be enhanced with technical decision support tools. This paper describes the role of artificial intelligence tools such as artificial neural networks and support vector machines for assisting the planning of operation and maintenance activities of wastewater infrastructures. A case study of the application of this type of tool to the wastewater infrastructures of Sistema de Saneamento da Costa do Estoril is presented.

The Effects of Literacy Support Tools on the Comprehension of Informational e-Books and Print-Based Text

ERIC Educational Resources Information Center

Herman, Heather A.

2017-01-01

This mixed methods research explores the effects of literacy support tools to support comprehension strategies when reading informational e-books and print-based text with 14 first-grade students. This study focused on the following comprehension strategies: annotating connections, annotating "I wonders," and looking back in the text.…

Programming Support Library (PSL). Users Manual.

DTIC Science & Technology

1978-05-01

which provides the tools to organize, implement, and control computer program develop- ment. This involves the support of the actual programming process...provides the tools toorganize, implement, and control computer program development. The system is designed specifically to support top-down development...Structured Programming are finding increasing application in the computing community. Structured programs are, however, difficult to write in

Control/structure interaction conceptual design tool

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.

1990-01-01

The JPL Control/Structure Interaction Program is developing new analytical methods for designing micro-precision spacecraft with controlled structures. One of these, the Conceptual Design Tool, will illustrate innovative new approaches to the integration of multi-disciplinary analysis and design methods. The tool will be used to demonstrate homogeneity of presentation, uniform data representation across analytical methods, and integrated systems modeling. The tool differs from current 'integrated systems' that support design teams most notably in its support for the new CSI multi-disciplinary engineer. The design tool will utilize a three dimensional solid model of the spacecraft under design as the central data organization metaphor. Various analytical methods, such as finite element structural analysis, control system analysis, and mechanical configuration layout, will store and retrieve data from a hierarchical, object oriented data structure that supports assemblies of components with associated data and algorithms. In addition to managing numerical model data, the tool will assist the designer in organizing, stating, and tracking system requirements.

Managing and Communicating Operational Workflow

PubMed Central

Weinberg, Stuart T.; Danciu, Ioana; Unertl, Kim M.

2016-01-01

Summary Background Healthcare team members in emergency department contexts have used electronic whiteboard solutions to help manage operational workflow for many years. Ambulatory clinic settings have highly complex operational workflow, but are still limited in electronic assistance to communicate and coordinate work activities. Objective To describe and discuss the design, implementation, use, and ongoing evolution of a coordination and collaboration tool supporting ambulatory clinic operational workflow at Vanderbilt University Medical Center (VUMC). Methods The outpatient whiteboard tool was initially designed to support healthcare work related to an electronic chemotherapy order-entry application. After a highly successful initial implementation in an oncology context, a high demand emerged across the organization for the outpatient whiteboard implementation. Over the past 10 years, developers have followed an iterative user-centered design process to evolve the tool. Results The electronic outpatient whiteboard system supports 194 separate whiteboards and is accessed by over 2800 distinct users on a typical day. Clinics can configure their whiteboards to support unique workflow elements. Since initial release, features such as immunization clinical decision support have been integrated into the system, based on requests from end users. Conclusions The success of the electronic outpatient whiteboard demonstrates the usefulness of an operational workflow tool within the ambulatory clinic setting. Operational workflow tools can play a significant role in supporting coordination, collaboration, and teamwork in ambulatory healthcare settings. PMID:27081407

Exploring GPs' experiences of using diagnostic tools for cancer: a qualitative study in primary care.

PubMed

Green, Trish; Martins, Tanimola; Hamilton, William; Rubin, Greg; Elliott, Kathy; Macleod, Una

2015-02-01

The UK has an estimated 5-10000 extra cancer deaths each year when compared to other European countries and diagnostic delays are thought to make a significant contribution to this. One of the initiatives in England intended to support primary care professionals has been the development of cancer risk assessment tools (RATs). These tools assist in identifying and quantifying the risk of cancer in symptomatic primary care patients. To explore GPs' experiences of incorporating the RATs for lung and bowel cancers into their clinical practice and in so doing, identify constraints and facilitators to the wider dissemination of the tools in primary care. We conducted semi-structured interviews over the telephone with 11 project managers who implemented the study and 23 GPs who used the tool. The interviews were digitally recorded, professionally transcribed verbatim and analysed through the construction of a 'thematic framework'. The training and support package was fundamental to the successful integration of the RATs into GPs' daily routines. Ongoing support from cancer networks alongside acknowledgement of the clinical expertize of the GPs by those implementing the study enhanced GPs' uptake of the tool in practice. Findings suggest that the embedding of clinical decision support tools into clinical practice is more likely to be achieved when they are perceived to support but not supersede the clinical judgement of their users. This element of our findings is a focal point of this article. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Opportunities and Strategies to Incorporate Ecosystem Services Knowledge and Decision Support Tools into Planning and Decision Making in Hawai`i

NASA Astrophysics Data System (ADS)

Bremer, Leah L.; Delevaux, Jade M. S.; Leary, James J. K.; J. Cox, Linda; Oleson, Kirsten L. L.

2015-04-01

Incorporating ecosystem services into management decisions is a promising means to link conservation and human well-being. Nonetheless, planning and management in Hawai`i, a state with highly valued natural capital, has yet to broadly utilize an ecosystem service approach. We conducted a stakeholder assessment, based on semi-structured interviews, with terrestrial ( n = 26) and marine ( n = 27) natural resource managers across the State of Hawai`i to understand the current use of ecosystem services (ES) knowledge and decision support tools and whether, how, and under what contexts, further development would potentially be useful. We found that ES knowledge and tools customized to Hawai`i could be useful for communication and outreach, justifying management decisions, and spatial planning. Greater incorporation of this approach is clearly desired and has a strong potential to contribute to more sustainable decision making and planning in Hawai`i and other oceanic island systems. However, the unique biophysical, socio-economic, and cultural context of Hawai`i, and other island systems, will require substantial adaptation of existing ES tools. Based on our findings, we identified four key opportunities for the use of ES knowledge and tools in Hawai`i: (1) linking native forest protection to watershed health; (2) supporting sustainable agriculture; (3) facilitating ridge-to-reef management; and (4) supporting statewide terrestrial and marine spatial planning. Given the interest expressed by natural resource managers, we envision broad adoption of ES knowledge and decision support tools if knowledge and tools are tailored to the Hawaiian context and coupled with adequate outreach and training.

Opportunities and strategies to incorporate ecosystem services knowledge and decision support tools into planning and decision making in Hawai'i.

PubMed

Bremer, Leah L; Delevaux, Jade M S; Leary, James J K; J Cox, Linda; Oleson, Kirsten L L

2015-04-01

Incorporating ecosystem services into management decisions is a promising means to link conservation and human well-being. Nonetheless, planning and management in Hawai'i, a state with highly valued natural capital, has yet to broadly utilize an ecosystem service approach. We conducted a stakeholder assessment, based on semi-structured interviews, with terrestrial (n = 26) and marine (n = 27) natural resource managers across the State of Hawai'i to understand the current use of ecosystem services (ES) knowledge and decision support tools and whether, how, and under what contexts, further development would potentially be useful. We found that ES knowledge and tools customized to Hawai'i could be useful for communication and outreach, justifying management decisions, and spatial planning. Greater incorporation of this approach is clearly desired and has a strong potential to contribute to more sustainable decision making and planning in Hawai'i and other oceanic island systems. However, the unique biophysical, socio-economic, and cultural context of Hawai'i, and other island systems, will require substantial adaptation of existing ES tools. Based on our findings, we identified four key opportunities for the use of ES knowledge and tools in Hawai'i: (1) linking native forest protection to watershed health; (2) supporting sustainable agriculture; (3) facilitating ridge-to-reef management; and (4) supporting statewide terrestrial and marine spatial planning. Given the interest expressed by natural resource managers, we envision broad adoption of ES knowledge and decision support tools if knowledge and tools are tailored to the Hawaiian context and coupled with adequate outreach and training.

Tools for Data Analysis in the Middle School Classroom: A Teacher Professional Development Program

NASA Astrophysics Data System (ADS)

Ledley, T. S.; Haddad, N.; McAuliffe, C.; Dahlman, L.

2006-12-01

In order for students to learn how to engage with scientific data to answer questions about the real world, it is imperative that their teachers are 1) comfortable with the data and the tools used to analyze it, and 2) feel prepared to support their students in this complex endeavor. TERC's Tools for Data Analysis in the Middle School Classroom (DataTools) professional development program, funded by NSF's ITEST program, prepares middle school teachers to integrate Web-based scientific data and analysis tools into their existing curricula. This 13-month program supports teachers in using a set of freely or commonly available tools with a wide range of data. It also gives them an opportunity to practice teaching these skills to students before teaching in their own classrooms. The ultimate goal of the program is to increase the number of middle school students who work directly with scientific data, who use the tools of technology to import, manipulate, visualize and analyze the data, who come to understand the power of data-based arguments, and who will consider pursuing a career in technical and scientific fields. In this session, we will describe the elements of the DataTools program and the Earth Exploration Toolbook (EET, http://serc.carleton.edu/eet), a Web-based resource that supports Earth system education for teachers and students in grades 6 through 16. The EET provides essential support to DataTools teachers as they use it to learn to locate and download Web-based data and use data analysis tools. We will also share what we have learned during the first year of this three-year program.

A Web-Based Treatment Decision Support Tool for Patients With Advanced Knee Arthritis: Evaluation of User Interface and Content Design

PubMed Central

Zheng, Hua; Rosal, Milagros C; Li, Wenjun; Borg, Amy; Yang, Wenyun; Ayers, David C

2018-01-01

Background Data-driven surgical decisions will ensure proper use and timing of surgical care. We developed a Web-based patient-centered treatment decision and assessment tool to guide treatment decisions among patients with advanced knee osteoarthritis who are considering total knee replacement surgery. Objective The aim of this study was to examine user experience and acceptance of the Web-based treatment decision support tool among older adults. Methods User-centered formative and summative evaluations were conducted for the tool. A sample of 28 patients who were considering total knee replacement participated in the study. Participants’ responses to the user interface design, the clarity of information, as well as usefulness, satisfaction, and acceptance of the tool were collected through qualitative (ie, individual patient interviews) and quantitative (ie, standardized Computer System Usability Questionnaire) methods. Results Participants were older adults with a mean age of 63 (SD 11) years. Three-quarters of them had no technical questions using the tool. User interface design recommendations included larger fonts, bigger buttons, less colors, simpler navigation without extra “next page” click, less mouse movement, and clearer illustrations with simple graphs. Color-coded bar charts and outcome-specific graphs with positive action were easiest for them to understand the outcomes data. Questionnaire data revealed high satisfaction with the tool usefulness and interface quality, and also showed ease of use of the tool, regardless of age or educational status. Conclusions We evaluated the usability of a patient-centered decision support tool designed for advanced knee arthritis patients to facilitate their knee osteoarthritis treatment decision making. The lessons learned can inform other decision support tools to improve interface and content design for older patients’ use. PMID:29712620

Early Warning System Implementation Guide: For Use with the National High School Center's Early Warning System Tool v2.0

ERIC Educational Resources Information Center

Therriault, Susan Bowles; Heppen, Jessica; O'Cummings, Mindee; Fryer, Lindsay; Johnson, Amy

2010-01-01

This Early Warning System (EWS) Implementation Guide is a supporting document for schools and districts that are implementing the National High School Center's Early Warning System (EWS) Tool v2.0. Developed by the National High School Center at the American Institutes for Research (AIR), the guide and tool support the establishment and…

WindWizard: A New Tool for Fire Management Decision Support

Treesearch

Bret W. Butler; Mark Finney; Larry Bradshaw; Jason Forthofer; Chuck McHugh; Rick Stratton; Dan Jimenez

2006-01-01

A new software tool has been developed to simulate surface wind speed and direction at the 100m to 300 m scale. This tool is useful when trying to estimate fire behavior in mountainous terrain. It is based on widely used computational fluid dynamics technology and has been tested against measured wind flows. In recent years it has been used to support fire management...

Scalable collaborative risk management technology for complex critical systems

NASA Technical Reports Server (NTRS)

Campbell, Scott; Torgerson, Leigh; Burleigh, Scott; Feather, Martin S.; Kiper, James D.

2004-01-01

We describe here our project and plans to develop methods, software tools, and infrastructure tools to address challenges relating to geographically distributed software development. Specifically, this work is creating an infrastructure that supports applications working over distributed geographical and organizational domains and is using this infrastructure to develop a tool that supports project development using risk management and analysis techniques where the participants are not collocated.

A survey on annotation tools for the biomedical literature.

PubMed

Neves, Mariana; Leser, Ulf

2014-03-01

New approaches to biomedical text mining crucially depend on the existence of comprehensive annotated corpora. Such corpora, commonly called gold standards, are important for learning patterns or models during the training phase, for evaluating and comparing the performance of algorithms and also for better understanding the information sought for by means of examples. Gold standards depend on human understanding and manual annotation of natural language text. This process is very time-consuming and expensive because it requires high intellectual effort from domain experts. Accordingly, the lack of gold standards is considered as one of the main bottlenecks for developing novel text mining methods. This situation led the development of tools that support humans in annotating texts. Such tools should be intuitive to use, should support a range of different input formats, should include visualization of annotated texts and should generate an easy-to-parse output format. Today, a range of tools which implement some of these functionalities are available. In this survey, we present a comprehensive survey of tools for supporting annotation of biomedical texts. Altogether, we considered almost 30 tools, 13 of which were selected for an in-depth comparison. The comparison was performed using predefined criteria and was accompanied by hands-on experiences whenever possible. Our survey shows that current tools can support many of the tasks in biomedical text annotation in a satisfying manner, but also that no tool can be considered as a true comprehensive solution.

Support arrangement for core modules of nuclear reactors

DOEpatents

Bollinger, Lawrence R.

1987-01-01

A support arrangement is provided for the core modules of a nuclear reactor which provides support access through the control drive mechanisms of the reactor. This arrangement provides axial support of individual reactor core modules from the pressure vessel head in a manner which permits attachment and detachment of the modules from the head to be accomplished through the control drive mechanisms after their leadscrews have been removed. The arrangement includes a module support nut which is suspended from the pressure vessel head and screw threaded to the shroud housing for the module. A spline lock prevents loosening of the screw connection. An installation tool assembly, including a cell lifting and preloading tool and a torquing tool, fits through the control drive mechanism and provides lifting of the shroud housing while disconnecting the spline lock, as well as application of torque to the module support nut.

Support arrangements for core modules of nuclear reactors. [PWR

DOEpatents

Bollinger, L.R.

1983-11-03

A support arrangement is provided for the core modules of a nuclear reactor which provides support access through the control drive mechanisms of the reactor. This arrangement provides axial support of individual reactor core modules from the pressure vessel head in a manner which permits attachment and detachment of the modules from the head to be accomplished through the control drive mechanisms after their leadscrews have been removed. The arrangement includes a module support nut which is suspended from the pressure vessel head and screw threaded to the shroud housing for the module. A spline lock prevents loosening of the screw connection. An installation tool assembly, including a cell lifting and preloading tool and a torquing tool, fits through the control drive mechanism and provides lifting of the shroud housing while disconnecting the spline lock, as well as application of torque to the module support nut.

Decision support frameworks and tools for conservation

USGS Publications Warehouse

Schwartz, Mark W.; Cook, Carly N.; Pressey, Robert L.; Pullin, Andrew S.; Runge, Michael C.; Salafsky, Nick; Sutherland, William J.; Williamson, Matthew A.

2018-01-01

The practice of conservation occurs within complex socioecological systems fraught with challenges that require transparent, defensible, and often socially engaged project planning and management. Planning and decision support frameworks are designed to help conservation practitioners increase planning rigor, project accountability, stakeholder participation, transparency in decisions, and learning. We describe and contrast five common frameworks within the context of six fundamental questions (why, who, what, where, when, how) at each of three planning stages of adaptive management (project scoping, operational planning, learning). We demonstrate that decision support frameworks provide varied and extensive tools for conservation planning and management. However, using any framework in isolation risks diminishing potential benefits since no one framework covers the full spectrum of potential conservation planning and decision challenges. We describe two case studies that have effectively deployed tools from across conservation frameworks to improve conservation actions and outcomes. Attention to the critical questions for conservation project planning should allow practitioners to operate within any framework and adapt tools to suit their specific management context. We call on conservation researchers and practitioners to regularly use decision support tools as standard practice for framing both practice and research.

Watershed Management Optimization Support Tool (WMOST) Webinar

EPA Pesticide Factsheets

EPA’s WMOST is a publicly available tool that can be used by state and local managers to screen a wide-range of options for cost-effective management of water resources, and it supports a broader integrated watershed management approach.

Development of a decision support tool for assessing vulnerability of transportation networks.

DOT National Transportation Integrated Search

2010-08-01

This research develops a decision support tool for assessing vulnerability of transportation networks. This report consists of 1) describing the trends of freight movements in Utah, 2) identifying the current and potential freight chokepoints/bottlen...

Payload Operations Support Team Tools

NASA Technical Reports Server (NTRS)

Askew, Bill; Barry, Matthew; Burrows, Gary; Casey, Mike; Charles, Joe; Downing, Nicholas; Jain, Monika; Leopold, Rebecca; Luty, Roger; McDill, David;

Exploring Engineering instructors' views about writing and online tools to support communication in Engineering

NASA Astrophysics Data System (ADS)

Howard, Sarah K.; Khosronejad, Maryam; Calvo, Rafael A.

2017-11-01

To be fully prepared for the professional workplace, Engineering students need to be able to effectively communicate. However, there has been a growing concern in the field about students' preparedness for this aspect of their future work. It is argued that online writing tools, to engage numbers of students in the writing process, can support feedback on and development of writing in engineering on a larger scale. Through interviews and questionnaires, this study explores engineering academics' perceptions of writing to better understand how online writing tools may be integrated into their teaching. Results suggest that writing is viewed positively in the discipline, but it is not believed to be essential to success in engineering. Online writing tools were believed to support a larger number of students, but low knowledge of the tools limited academics' understanding of their usefulness in teaching and learning. Implications for innovation in undergraduate teaching are discussed.

A randomized, controlled trial of in situ pediatric advanced life support recertification ("pediatric advanced life support reconstructed") compared with standard pediatric advanced life support recertification for ICU frontline providers*.

PubMed

Kurosawa, Hiroshi; Ikeyama, Takanari; Achuff, Patricia; Perkel, Madeline; Watson, Christine; Monachino, Annemarie; Remy, Daphne; Deutsch, Ellen; Buchanan, Newton; Anderson, Jodee; Berg, Robert A; Nadkarni, Vinay M; Nishisaki, Akira

2014-03-01

Recent evidence shows poor retention of Pediatric Advanced Life Support provider skills. Frequent refresher training and in situ simulation are promising interventions. We developed a "Pediatric Advanced Life Support-reconstructed" recertification course by deconstructing the training into six 30-minute in situ simulation scenario sessions delivered over 6 months. We hypothesized that in situ Pediatric Advanced Life Support-reconstructed implementation is feasible and as effective as standard Pediatric Advanced Life Support recertification. A prospective randomized, single-blinded trial. Single-center, large, tertiary PICU in a university-affiliated children's hospital. Nurses and respiratory therapists in PICU. Simulation-based modular Pediatric Advanced Life Support recertification training. Simulation-based pre- and postassessment sessions were conducted to evaluate participants' performance. Video-recorded sessions were rated by trained raters blinded to allocation. The primary outcome was skill performance measured by a validated Clinical Performance Tool, and secondary outcome was behavioral performance measured by a Behavioral Assessment Tool. A mixed-effect model was used to account for baseline differences. Forty participants were prospectively randomized to Pediatric Advanced Life Support reconstructed versus standard Pediatric Advanced Life Support with no significant difference in demographics. Clinical Performance Tool score was similar at baseline in both groups and improved after Pediatric Advanced Life Support reconstructed (pre, 16.3 ± 4.1 vs post, 22.4 ± 3.9; p < 0.001), but not after standard Pediatric Advanced Life Support (pre, 14.3 ± 4.7 vs post, 14.9 ± 4.4; p =0.59). Improvement of Clinical Performance Tool was significantly higher in Pediatric Advanced Life Support reconstructed compared with standard Pediatric Advanced Life Support (p = 0.006). Behavioral Assessment Tool improved in both groups: Pediatric Advanced Life Support reconstructed (pre, 33.3 ± 4.5 vs post, 35.9 ± 5.0; p = 0.008) and standard Pediatric Advanced Life Support (pre, 30.5 ± 4.7 vs post, 33.6 ± 4.9; p = 0.02), with no significant difference of improvement between both groups (p = 0.49). For PICU-based nurses and respiratory therapists, simulation-based "Pediatric Advanced Life Support-reconstructed" in situ training is feasible and more effective than standard Pediatric Advanced Life Support recertification training for skill performance. Both Pediatric Advanced Life Support recertification training courses improved behavioral performance.

Information and Communication Technology to Support Self-Management of Patients with Mild Acquired Cognitive Impairments: Systematic Review

PubMed Central

Scholl, Jeremiah; Bartfai, Aniko; Koch, Sabine

2012-01-01

Background Mild acquired cognitive impairment (MACI) is a new term used to describe a subgroup of patients with mild cognitive impairment (MCI) who are expected to reach a stable cognitive level over time. This patient group is generally young and have acquired MCI from a head injury or mild stroke. Although the past decade has seen a large amount of research on how to use information and communication technology (ICT) to support self-management of patients with chronic diseases, MACI has not received much attention. Therefore, there is a lack of information about what tools have been created and evaluated that are suitable for self-management of MACI patients, and a lack of clear direction on how best to proceed with ICT tools to support self-management of MACI patients. Objective This paper aims to provide direction for further research and development of tools that can support health care professionals in assisting MACI patients with self-management. An overview of studies reporting on the design and/or evaluation of ICT tools for assisting MACI patients in self-management is presented. We also analyze the evidence of benefit provided by these tools, and how their functionality matches MACI patients’ needs to determine areas of interest for further research and development. Methods A review of the existing literature about available assistive ICT tools for MACI patients was conducted using 8 different medical, scientific, engineering, and physiotherapy library databases. The functionality of tools was analyzed using an analytical framework based on the International Classification of Functioning, Disability and Health (ICF) and a subset of common and important problems for patients with MACI created by MACI experts in Sweden. Results A total of 55 search phrases applied in the 8 databases returned 5969 articles. After review, 7 articles met the inclusion criteria. Most articles reported case reports and exploratory research. Out of the 7 articles, 4 (57%) studies had less than 10 participants, 5 (71%) technologies were memory aids, and 6 studies were mobile technologies. All 7 studies fit the profile for patients with MACI as described by our analytical framework. However, several areas in the framework important for meeting patient needs were not covered by the functionality in any of the ICT tools. Conclusions This study shows a lack of ICT tools developed and evaluated for supporting self-management of MACI patients. Our analytical framework was a valuable tool for providing an overview of how the functionality of these tools matched patient needs. There are a number of important areas for MACI patients that are not covered by the functionality of existing tools, such as support for interpersonal interactions and relationships. Further research on ICT tools to support self-management for patients with MACI is needed. PMID:23165152

Model-It: A Case Study of Learner-Centered Software Design for Supporting Model Building.

ERIC Educational Resources Information Center

Jackson, Shari L.; Stratford, Steven J.; Krajcik, Joseph S.; Soloway, Elliot

Learner-centered software design (LCSD) guides the design of tasks, tools, and interfaces in order to support the unique needs of learners: growth, diversity and motivation. This paper presents a framework for LCSD and describes a case study of its application to the ScienceWare Model-It, a learner-centered tool to support scientific modeling and…

Case Study Evaluation of an Intervention Planning Tool to Support Emotional Well-Being and Behaviour in Schools

ERIC Educational Resources Information Center

Stanbridge, Joanna K.; Campbell, Lorraine N.

2016-01-01

Questions of how best to support both children's emotional well-being and behaviour in schools are pervasive. The efficacy of an intervention planning tool to support internalising and externalising emotional needs and promote early intervention was explored in a small-scale case study. Adults were trained in two primary schools to carry out the…

Conceptualisation and development of the Conversational Health Literacy Assessment Tool (CHAT).

PubMed

O'Hara, Jonathan; Hawkins, Melanie; Batterham, Roy; Dodson, Sarity; Osborne, Richard H; Beauchamp, Alison

2018-03-22

The aim of this study was to develop a tool to support health workers' ability to identify patients' multidimensional health literacy strengths and challenges. The tool was intended to be suitable for administration in healthcare settings where health workers must identify health literacy priorities as the basis for person-centred care. Development was based on a qualitative co-design process that used the Health Literacy Questionnaire (HLQ) as a framework to generate questions. Health workers were recruited to participate in an online consultation, a workshop, and two rounds of pilot testing. Participating health workers identified and refined ten questions that target five areas of assessment: supportive professional relationships, supportive personal relationships, health information access and comprehension, current health behaviours, and health promotion barriers and support. Preliminary evidence suggests that application of the Conversational Health Literacy Assessment Tool (CHAT) can support health workers to better understand the health literacy challenges and supportive resources of their patients. As an integrated clinical process, the CHAT can supplement existing intake and assessment procedures across healthcare settings to give insight into patients' circumstances so that decisions about care can be tailored to be more appropriate and effective.

Share Repository Framework: Component Specification and Otology

DTIC Science & Technology

2008-04-23

Palantir Technologies has created one such software application to support the DoD intelligence community by providing robust capabilities for...managing data from various sources. The Palantir tool is based on user-defined ontologies and supports multiple representation and analysis tools

A simulation-optimization-based decision support tool for mitigating traffic congestion.

DOT National Transportation Integrated Search

2009-12-01

"Traffic congestion has grown considerably in the United States over the past twenty years. In this paper, we develop : a robust decision support tool based on simulation optimization to evaluate and recommend congestion-mitigation : strategies to tr...

GET SMARTE: A DECISION SUPPORT SYSTEM TO REVITALIZE COMMUNITIES - CABERNET 2007

EPA Science Inventory

Sustainable Management Approaches and Revitalization Tools - electronic (SMARTe), is an open-source, web-based, decision support system for developing and evaluating future reuse scenarios for potentially contaminated land. SMARTe contains information and analysis tools for all a...

TRUST: TDRSS Resource User Support Tool

NASA Technical Reports Server (NTRS)

Sparn, Thomas P.; Gablehouse, R. Daniel

1991-01-01

TRUST-TDRSS (Tracking Data and Relay Satellite System) Resource User Support Tool is presented in the form of the viewgraphs. The following subject areas are covered: TRUST development cycle; the TRUST system; scheduling window; ODM/GCMR window; TRUST architecture; surpass; and summary.

Tools Automate Spacecraft Testing, Operation

NASA Technical Reports Server (NTRS)

2010-01-01

"NASA began the Small Explorer (SMEX) program to develop spacecraft to advance astrophysics and space physics. As one of the entities supporting software development at Goddard Space Flight Center, the Hammers Company Inc. (tHC Inc.), of Greenbelt, Maryland, developed the Integrated Test and Operations System to support SMEX. Later, the company received additional Small Business Innovation Research (SBIR) funding from Goddard for a tool to facilitate the development of flight software called VirtualSat. NASA uses the tools to support 15 satellites, and the aerospace industry is using them to develop science instruments, spacecraft computer systems, and navigation and control software."

SAGA: A project to automate the management of software production systems

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Beckman, Carol S.; Benzinger, Leonora; Beshers, George; Hammerslag, David; Kimball, John; Kirslis, Peter A.; Render, Hal; Richards, Paul; Terwilliger, Robert

1985-01-01

The SAGA system is a software environment that is designed to support most of the software development activities that occur in a software lifecycle. The system can be configured to support specific software development applications using given programming languages, tools, and methodologies. Meta-tools are provided to ease configuration. The SAGA system consists of a small number of software components that are adapted by the meta-tools into specific tools for use in the software development application. The modules are design so that the meta-tools can construct an environment which is both integrated and flexible. The SAGA project is documented in several papers which are presented.

(abstract) Generic Modeling of a Life Support System for Process Technology Comparisons

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support systems and process technology options for a Lunar Base and a Mars Exploration Mission.

Peer Assessment among Secondary School Students: Introducing a Peer Feedback Tool in the Context of a Computer Supported Inquiry Learning Environment in Science

ERIC Educational Resources Information Center

Tsivitanidou, Olia; Zacharia, Zacharias C.; Hovardas, Tasos; Nicolaou, Aphrodite

2012-01-01

In this study we introduced a peer feedback tool to secondary school students while aiming at investigating whether this tool leads to a feedback dialogue when using a computer supported inquiry learning environment in science. Moreover, we aimed at examining what type of feedback students ask for and receive and whether the students use the…

Latest Community Coordinated Modeling Center (CCMC) services and innovative tools supporting the space weather research and operational communities.

NASA Astrophysics Data System (ADS)

Mendoza, A. M. M.; Rastaetter, L.; Kuznetsova, M. M.; Mays, M. L.; Chulaki, A.; Shim, J. S.; MacNeice, P. J.; Taktakishvili, A.; Collado-Vega, Y. M.; Weigand, C.; Zheng, Y.; Mullinix, R.; Patel, K.; Pembroke, A. D.; Pulkkinen, A. A.; Boblitt, J. M.; Bakshi, S. S.; Tsui, T.

2017-12-01

The Community Coordinated Modeling Center (CCMC), with the fundamental goal of aiding the transition of modern space science models into space weather forecasting while supporting space science research, has been serving as an integral hub for over 15 years, providing invaluable resources to both space weather scientific and operational communities. CCMC has developed and provided innovative web-based point of access tools varying from: Runs-On-Request System - providing unprecedented global access to the largest collection of state-of-the-art solar and space physics models, Integrated Space Weather Analysis (iSWA) - a powerful dissemination system for space weather information, Advanced Online Visualization and Analysis tools for more accurate interpretation of model results, Standard Data formats for Simulation Data downloads, and Mobile apps to view space weather data anywhere to the scientific community. In addition to supporting research and performing model evaluations, CCMC also supports space science education by hosting summer students through local universities. In this poster, we will showcase CCMC's latest innovative tools and services, and CCMC's tools that revolutionized the way we do research and improve our operational space weather capabilities. CCMC's free tools and resources are all publicly available online (http://ccmc.gsfc.nasa.gov).

Large Crater Clustering tool

NASA Astrophysics Data System (ADS)

Laura, Jason; Skinner, James A.; Hunter, Marc A.

2017-08-01

In this paper we present the Large Crater Clustering (LCC) tool set, an ArcGIS plugin that supports the quantitative approximation of a primary impact location from user-identified locations of possible secondary impact craters or the long-axes of clustered secondary craters. The identification of primary impact craters directly supports planetary geologic mapping and topical science studies where the chronostratigraphic age of some geologic units may be known, but more distant features have questionable geologic ages. Previous works (e.g., McEwen et al., 2005; Dundas and McEwen, 2007) have shown that the source of secondary impact craters can be estimated from secondary impact craters. This work adapts those methods into a statistically robust tool set. We describe the four individual tools within the LCC tool set to support: (1) processing individually digitized point observations (craters), (2) estimating the directional distribution of a clustered set of craters, back projecting the potential flight paths (crater clusters or linearly approximated catenae or lineaments), (3) intersecting projected paths, and (4) intersecting back-projected trajectories to approximate the local of potential source primary craters. We present two case studies using secondary impact features mapped in two regions of Mars. We demonstrate that the tool is able to quantitatively identify primary impacts and supports the improved qualitative interpretation of potential secondary crater flight trajectories.

Managing personal health information in distributed research network environments.

PubMed

Bredfeldt, Christine E; Butani, Amy L; Pardee, Roy; Hitz, Paul; Padmanabhan, Sandy; Saylor, Gwyn

2013-10-08

Studying rare outcomes, new interventions and diverse populations often requires collaborations across multiple health research partners. However, transferring healthcare research data from one institution to another can increase the risk of data privacy and security breaches. A working group of multi-site research programmers evaluated the need for tools to support data security and data privacy. The group determined that data privacy support tools should: 1) allow for a range of allowable Protected Health Information (PHI); 2) clearly identify what type of data should be protected under the Health Insurance Portability and Accountability Act (HIPAA); and 3) help analysts identify which protected health information data elements are allowable in a given project and how they should be protected during data transfer. Based on these requirements we developed two performance support tools to support data programmers and site analysts in exchanging research data. The first tool, a workplan template, guides the lead programmer through effectively communicating the details of multi-site programming, including how to run the program, what output the program will create, and whether the output is expected to contain protected health information. The second performance support tool is a checklist that site analysts can use to ensure that multi-site program output conforms to expectations and does not contain protected health information beyond what is allowed under the multi-site research agreements. Together the two tools create a formal multi-site programming workflow designed to reduce the chance of accidental PHI disclosure.

NASA Remote Sensing Observations for Water Resource and Infrastructure Management

NASA Astrophysics Data System (ADS)

Granger, S. L.; Armstrong, L.; Farr, T.; Geller, G.; Heath, E.; Hyon, J.; Lavoie, S.; McDonald, K.; Realmuto, V.; Stough, T.; Szana, K.

2008-12-01

Decision support tools employed by water resource and infrastructure managers often utilize data products obtained from local sources or national/regional databases of historic surveys and observations. Incorporation of data from these sources can be laborious and time consuming as new products must be identified, cleaned and archived for each new study site. Adding remote sensing observations to the list of sources holds promise for a timely, consistent, global product to aid decision support at regional and global scales by providing global observations of geophysical parameters including soil moisture, precipitation, atmospheric temperature, derived evapotranspiration, and snow extent needed for hydrologic models and decision support tools. However, issues such as spatial and temporal resolution arise when attempting to integrate remote sensing observations into existing decision support tools. We are working to overcome these and other challenges through partnerships with water resource managers, tool developers and other stakeholders. We are developing a new data processing framework, enabled by a core GIS server, to seamlessly pull together observations from disparate sources for synthesis into information products and visualizations useful to the water resources community. A case study approach is being taken to develop the system by working closely with water infrastructure and resource managers to integrate remote observations into infrastructure, hydrologic and water resource decision tools. We present the results of a case study utilizing observations from the PALS aircraft instrument as a proxy for NASA's upcoming Soil Moisture Active Passive (SMAP) mission and an existing commercial decision support tool.

Canonic FFT flow graphs for real-valued even/odd symmetric inputs

NASA Astrophysics Data System (ADS)

Lao, Yingjie; Parhi, Keshab K.

2017-12-01

Canonic real-valued fast Fourier transform (RFFT) has been proposed to reduce the arithmetic complexity by eliminating redundancies. In a canonic N-point RFFT, the number of signal values at each stage is canonic with respect to the number of signal values, i.e., N. The major advantage of the canonic RFFTs is that these require the least number of butterfly operations and only real datapaths when mapped to architectures. In this paper, we consider the FFT computation whose inputs are not only real but also even/odd symmetric, which indeed lead to the well-known discrete cosine and sine transforms (DCTs and DSTs). Novel algorithms for generating the flow graphs of canonic RFFTs with even/odd symmetric inputs are proposed. It is shown that the proposed algorithms lead to canonic structures with N/2 +1 signal values at each stage for an N-point real even symmetric FFT (REFFT) or N/2 -1 signal values at each stage for an N-point RFFT real odd symmetric FFT (ROFFT). In order to remove butterfly operations, several twiddle factor transformations are proposed in this paper. We also discuss the design of canonic REFFT for any composite length. Performances of the canonic REFFT/ROFFT are also discussed. It is shown that the flow graph of canonic REFFT/ROFFT has less number of interconnections, less butterfly operations, and less twiddle factor operations, compared to prior works.

The Flash Environmental Assessment Tool: worldwide first aid for chemical accidents response, pro action, prevention and preparedness.

PubMed

Posthuma, Leo; Wahlstrom, Emilia; Nijenhuis, René; Dijkens, Chris; de Zwart, Dick; van de Meent, Dik; Hollander, Anne; Brand, Ellen; den Hollander, Henri A; van Middelaar, Johan; van Dijk, Sander; Hall, E F; Hoffer, Sally

2014-11-01

The United Nations response mechanism to environmental emergencies requested a tool to support disaster assessment and coordination actions by United Nations Disaster Assessment and Coordination (UNDAC) teams. The tool should support on-site decision making when substantial chemical emissions affect human health directly or via the environment and should be suitable for prioritizing impact reduction management options under challenging conditions worldwide. To answer this need, the Flash Environmental Assessment Tool (FEAT) was developed and the scientific and practical underpinning and application of this tool are described in this paper. FEAT consists of a printed decision framework and lookup tables, generated by combining the scientific data on chemicals, exposure pathways and vulnerabilities with the pragmatic needs of emergency field teams. Application of the tool yields information that can help prioritize impact reduction measures. The first years of use illustrated the usefulness of the tool as well as suggesting additional uses and improvements. An additional use is application of the back-office tool (Hazard Identification Tool, HIT), the results of which aid decision-making by the authorities of affected countries and the preparation of field teams for on-site deployment. Another extra use is in disaster pro action and prevention. In this case, the application of the tool supports safe land-use planning and improved technical design of chemical facilities. UNDAC teams are trained to use the tool after large-scale sudden onset natural disasters. Copyright © 2014 Elsevier Ltd. All rights reserved.

Integrating Reliability Analysis with a Performance Tool

NASA Technical Reports Server (NTRS)

Nicol, David M.; Palumbo, Daniel L.; Ulrey, Michael

1995-01-01

A large number of commercial simulation tools support performance oriented studies of complex computer and communication systems. Reliability of these systems, when desired, must be obtained by remodeling the system in a different tool. This has obvious drawbacks: (1) substantial extra effort is required to create the reliability model; (2) through modeling error the reliability model may not reflect precisely the same system as the performance model; (3) as the performance model evolves one must continuously reevaluate the validity of assumptions made in that model. In this paper we describe an approach, and a tool that implements this approach, for integrating a reliability analysis engine into a production quality simulation based performance modeling tool, and for modeling within such an integrated tool. The integrated tool allows one to use the same modeling formalisms to conduct both performance and reliability studies. We describe how the reliability analysis engine is integrated into the performance tool, describe the extensions made to the performance tool to support the reliability analysis, and consider the tool's performance.

Supporting Scientific Analysis within Collaborative Problem Solving Environments

NASA Technical Reports Server (NTRS)

Watson, Velvin R.; Kwak, Dochan (Technical Monitor)

2000-01-01

Collaborative problem solving environments for scientists should contain the analysis tools the scientists require in addition to the remote collaboration tools used for general communication. Unfortunately, most scientific analysis tools have been designed for a "stand-alone mode" and cannot be easily modified to work well in a collaborative environment. This paper addresses the questions, "What features are desired in a scientific analysis tool contained within a collaborative environment?", "What are the tool design criteria needed to provide these features?", and "What support is required from the architecture to support these design criteria?." First, the features of scientific analysis tools that are important for effective analysis in collaborative environments are listed. Next, several design criteria for developing analysis tools that will provide these features are presented. Then requirements for the architecture to support these design criteria are listed. Sonic proposed architectures for collaborative problem solving environments are reviewed and their capabilities to support the specified design criteria are discussed. A deficiency in the most popular architecture for remote application sharing, the ITU T. 120 architecture, prevents it from supporting highly interactive, dynamic, high resolution graphics. To illustrate that the specified design criteria can provide a highly effective analysis tool within a collaborative problem solving environment, a scientific analysis tool that contains the specified design criteria has been integrated into a collaborative environment and tested for effectiveness. The tests were conducted in collaborations between remote sites in the US and between remote sites on different continents. The tests showed that the tool (a tool for the visual analysis of computer simulations of physics) was highly effective for both synchronous and asynchronous collaborative analyses. The important features provided by the tool (and made possible by the specified design criteria) are: 1. The tool provides highly interactive, dynamic, high resolution, 3D graphics. 2. All remote scientists can view the same dynamic, high resolution, 3D scenes of the analysis as the analysis is being conducted. 3. The responsiveness of the tool is nearly identical to the responsiveness of the tool in a stand-alone mode. 4. The scientists can transfer control of the analysis between themselves. 5. Any analysis session or segment of an analysis session, whether done individually or collaboratively, can be recorded and posted on the Web for other scientists or students to download and play in either a collaborative or individual mode. 6. The scientist or student who downloaded the session can, individually or collaboratively, modify or extend the session with his/her own "what if" analysis of the data and post his/her version of the analysis back onto the Web. 7. The peak network bandwidth used in the collaborative sessions is only 1K bit/second even though the scientists at all sites are viewing high resolution (1280 x 1024 pixels), dynamic, 3D scenes of the analysis. The links between the specified design criteria and these performance features are presented.

A review of decision support, risk communication and patient information tools for thrombolytic treatment in acute stroke: lessons for tool developers

PubMed Central

2013-01-01

Background Tools to support clinical or patient decision-making in the treatment/management of a health condition are used in a range of clinical settings for numerous preference-sensitive healthcare decisions. Their impact in clinical practice is largely dependent on their quality across a range of domains. We critically analysed currently available tools to support decision making or patient understanding in the treatment of acute ischaemic stroke with intravenous thrombolysis, as an exemplar to provide clinicians/researchers with practical guidance on development, evaluation and implementation of such tools for other preference-sensitive treatment options/decisions in different clinical contexts. Methods Tools were identified from bibliographic databases, Internet searches and a survey of UK and North American stroke networks. Two reviewers critically analysed tools to establish: information on benefits/risks of thrombolysis included in tools, and the methods used to convey probabilistic information (verbal descriptors, numerical and graphical); adherence to guidance on presenting outcome probabilities (IPDASi probabilities items) and information content (Picker Institute Checklist); readability (Fog Index); and the extent that tools had comprehensive development processes. Results Nine tools of 26 identified included information on a full range of benefits/risks of thrombolysis. Verbal descriptors, frequencies and percentages were used to convey probabilistic information in 20, 19 and 18 tools respectively, whilst nine used graphical methods. Shortcomings in presentation of outcome probabilities (e.g. omitting outcomes without treatment) were identified. Patient information tools had an aggregate median Fog index score of 10. None of the tools had comprehensive development processes. Conclusions Tools to support decision making or patient understanding in the treatment of acute stroke with thrombolysis have been sub-optimally developed. Development of tools should utilise mixed methods and strategies to meaningfully involve clinicians, patients and their relatives in an iterative design process; include evidence-based methods to augment interpretability of textual and probabilistic information (e.g. graphical displays showing natural frequencies) on the full range of outcome states associated with available options; and address patients with different levels of health literacy. Implementation of tools will be enhanced when mechanisms are in place to periodically assess the relevance of tools and where necessary, update the mode of delivery, form and information content. PMID:23777368

Validity evidence as a key marker of quality of technical skill assessment in OTL-HNS.

PubMed

Labbé, Mathilde; Young, Meredith; Nguyen, Lily H P

2018-01-13

Quality monitoring of assessment practices should be a priority in all residency programs. Validity evidence is one of the main hallmarks of assessment quality and should be collected to support the interpretation and use of assessment data. Our objective was to identify, synthesize, and present the validity evidence reported supporting different technical skill assessment tools in otolaryngology-head and neck surgery (OTL-HNS). We performed a secondary analysis of data generated through a systematic review of all published tools for assessing technical skills in OTL-HNS (n = 16). For each tool, we coded validity evidence according to the five types of evidence described by the American Educational Research Association's interpretation of Messick's validity framework. Descriptive statistical analyses were conducted. All 16 tools included in our analysis were supported by internal structure and relationship to variables validity evidence. Eleven articles presented evidence supporting content. Response process was discussed only in one article, and no study reported on evidence exploring consequences. We present the validity evidence reported for 16 rater-based tools that could be used for work-based assessment of OTL-HNS residents in the operating room. The articles included in our review were consistently deficient in evidence for response process and consequences. Rater-based assessment tools that support high-stakes decisions that impact the learner and programs should include several sources of validity evidence. Thus, use of any assessment should be done with careful consideration of the context-specific validity evidence supporting score interpretation, and we encourage deliberate continual assessment quality-monitoring. NA. Laryngoscope, 2018. © 2018 The American Laryngological, Rhinological and Otological Society, Inc.

An investigation of the validity of the Work Assessment Triage Tool clinical decision support tool for selecting optimal rehabilitation interventions for workers with musculoskeletal injuries.

PubMed

Qin, Ziling; Armijo-Olivo, Susan; Woodhouse, Linda J; Gross, Douglas P

2016-03-01

To evaluate the concurrent validity of a clinical decision support tool (Work Assessment Triage Tool (WATT)) developed to select rehabilitation treatments for injured workers with musculoskeletal conditions. Methodological study with cross-sectional and prospective components. Data were obtained from the Workers' Compensation Board of Alberta rehabilitation facility in Edmonton, Canada. A total of 432 workers' compensation claimants evaluated between November 2011 and June 2012. Percentage agreement between the Work Assessment Triage Tool and clinician recommendations was used to determine concurrent validity. In claimants returning to work, frequencies of matching were calculated and compared between clinician and Work Assessment Triage Tool recommendations and the actual programs undertaken by claimants. The frequency of each intervention recommended by clinicians, Work Assessment Triage Tool, and case managers were also calculated and compared. Percentage agreement between clinician and Work Assessment Triage Tool recommendations was poor (19%) to moderate (46%) and Kappa = 0.37 (95% CI -0.02, 0.76). The Work Assessment Triage Tool did not improve upon clinician recommendations as only 14 out of 31 claimants returning to work had programs that contradicted clinician recommendations, but were consistent with Work Assessment Triage Tool recommendations. Clinicians and case managers were inclined to recommend functional restoration, physical therapy, or no rehabilitation while the Work Assessment Triage Tool recommended additional evidence-based interventions, such as workplace-based interventions. Our findings do not provide evidence of concurrent validity for the Work Assessment Triage Tool compared with clinician recommendations. Based on these results, we cannot recommend further implementation of the Work Assessment Triage Tool. However, the Work Assessment Triage Tool appeared more likely than clinicians to recommend interventions supported by evidence; thus warranting further research. © The Author(s) 2015.

Evaluating the Effectiveness of Web-based Climate Resilience Decision Support Tools: Insights from Coastal New Jersey

NASA Astrophysics Data System (ADS)

Brady, M.; Lathrop, R.; Auermuller, L. M.; Leichenko, R.

2016-12-01

Despite the recent surge of Web-based decision support tools designed to promote resiliency in U.S. coastal communities, to-date there has been no systematic study of their effectiveness. This study demonstrates a method to evaluate important aspects of effectiveness of four Web map tools designed to promote consideration of climate risk information in local decision-making and planning used in coastal New Jersey. In summer 2015, the research team conducted in-depth phone interviews with users of one regulatory and three non-regulatory Web map tools using a semi-structured questionnaire. The interview and analysis design drew from a combination of effectiveness evaluation approaches developed in software and information usability, program evaluation, and management information system (MIS) research. Effectiveness assessment results were further analyzed and discussed in terms of conceptual hierarchy of system objectives defined by respective tool developer and user organizations represented in the study. Insights from the interviews suggest that users rely on Web tools as a supplement to desktop and analog map sources because they provide relevant and up-to-date information in a highly accessible and mobile format. The users also reported relying on multiple information sources and comparison between digital and analog sources for decision support. However, with respect to this decision support benefit, users were constrained by accessibility factors such as lack of awareness and training with some tools, lack of salient information such as planning time horizons associated with future flood scenarios, and environmental factors such as mandates restricting some users to regulatory tools. Perceptions of Web tool credibility seem favorable overall, but factors including system design imperfections and inconsistencies in data and information across platforms limited trust, highlighting a need for better coordination between tools. Contributions of the study include user feedback on web-tool system designs consistent with collaborative methods for enhancing usability and a systematic look at effectiveness that includes both user perspectives and consideration of developer and organizational objectives.

Graphical User Interface Development and Design to Support Airport Runway Configuration Management

NASA Technical Reports Server (NTRS)

Jones, Debra G.; Lenox, Michelle; Onal, Emrah; Latorella, Kara A.; Lohr, Gary W.; Le Vie, Lisa

2015-01-01

The objective of this effort was to develop a graphical user interface (GUI) for the National Aeronautics and Space Administration's (NASA) System Oriented Runway Management (SORM) decision support tool to support runway management. This tool is expected to be used by traffic flow managers and supervisors in the Airport Traffic Control Tower (ATCT) and Terminal Radar Approach Control (TRACON) facilities.

A Chaperone: Using Twitter for Professional Guidance, Social Support and Personal Empowerment of Novice Teachers in Online Workshops

ERIC Educational Resources Information Center

Pieterse, Efrat; Peled, Yehuda

2014-01-01

This research examines the feasibility and benefits of using Twitter as a support tool to enhance social interaction among teachers in their first year of service, as they participate in an online induction workshop, and as a tool to aid the workshop's moderator in monitoring the group and enhancing and supporting the early-service teachers'…

Quitting Tools and Medications | Smokefree 60+

Cancer.gov

The nicotine in cigarettes makes them addictive. There are a number of tools to help you curb your addiction to nicotine. Quitting Tools There are many tools to help you quit smoking, from counseling to medications. Here are a few different tools that can support you to quit smoking.

Blended Interaction Design: A Spatial Workspace Supporting HCI and Design Practice

NASA Astrophysics Data System (ADS)

Geyer, Florian

This research investigates novel methods and techniques along with tool support that result from a conceptual blend of human-computer interaction with design practice. Using blending theory with material anchors as a theoretical framework, we frame both input spaces and explore emerging structures within technical, cognitive, and social aspects. Based on our results, we will describe a framework of the emerging structures and will design and evaluate tool support within a spatial, studio-like workspace to support collaborative creativity in interaction design.

Toolkit of Available EPA Green Infrastructure Modeling Software: Watershed Management Optimization Support Tool (WMOST)

EPA Science Inventory

Watershed Management Optimization Support Tool (WMOST) is a software application designed tofacilitate integrated water resources management across wet and dry climate regions. It allows waterresources managers and planners to screen a wide range of practices across their watersh...

Autonomous Task Management and Decision Support Tools

NASA Technical Reports Server (NTRS)

Burian, Barbara

2017-01-01

For some time aircraft manufacturers and researchers have been pursuing mechanisms for reducing crew workload and providing better decision support to the pilots, especially during non-normal situations. Some previous attempts to develop task managers or pilot decision support tools have not resulted in robust and fully functional systems. However, the increasing sophistication of sensors and automated reasoners, and the exponential surge in the amount of digital data that is now available create a ripe environment for the development of a robust, dynamic, task manager and decision support tool that is context sensitive and integrates information from a wide array of on-board and off aircraft sourcesa tool that monitors systems and the overall flight situation, anticipates information needs, prioritizes tasks appropriately, keeps pilots well informed, and is nimble and able to adapt to changing circumstances. This presentation will discuss the many significant challenges and issues associated with the development and functionality of such a system for use on the aircraft flight deck.

SPICE for ESA Planetary Missions: geometry and visualization support to studies, operations and data analysis within your reach

NASA Astrophysics Data System (ADS)

Costa, Marc

2018-05-01

JUICE is a mission chosen in the framework of the Cosmic Vision 2015-2024 program of the SRE. JUICE will survey the Jovian system with a special focus on the three Galilean Moons. Currently the mission is under study activities during its Definition Phase. For this period the future mission scenarios are being studied by the Science Working Team (SWT). The Mission Analysis and Payload Support (MAPPS) and the Solar System Science Operations Laboratory (SOLab) tools are being used to provide active support to the SWT in synergy with other operational tools used in the Department in order to evaluate the feasibility of those scenarios. This contribution will outline the capabilities, synergies as well as use cases of the mentioned tools focusing on the support provided to JUICEís study phase on the study of its critical operational scenarios and the early developments of its Science Ground Segment demonstrating the added value that such a tool provides to planetary science missions.

Extensibility Experiments with the Software Life-Cycle Support Environment

DTIC Science & Technology

1991-11-01

APRICOT ) and Bit- Oriented Message Definer (BMD); and three from the Ada Software Repository (ASR) at White Sands-the NASA/Goddard Space Flight Center...Graphical Kernel System (GKS). c. AMS - The Automated Measurement System tool supports the definition, collec- tion, and reporting of quality metric...Ada Primitive Order Compilation Order Tool ( APRICOT ) 2. Bit-Oriented Message Definer (BMD) 3. LGEN: A Language Generator Tool 4. I"ilc Chc-ker 5

Structured clinical documentation in the electronic medical record to improve quality and to support practice-based research in epilepsy.

PubMed

Narayanan, Jaishree; Dobrin, Sofia; Choi, Janet; Rubin, Susan; Pham, Anna; Patel, Vimal; Frigerio, Roberta; Maurer, Darryck; Gupta, Payal; Link, Lourdes; Walters, Shaun; Wang, Chi; Ji, Yuan; Maraganore, Demetrius M

2017-01-01

Using the electronic medical record (EMR) to capture structured clinical data at the point of care would be a practical way to support quality improvement and practice-based research in epilepsy. We describe our stepwise process for building structured clinical documentation support tools in the EMR that define best practices in epilepsy, and we describe how we incorporated these toolkits into our clinical workflow. These tools write notes and capture hundreds of fields of data including several score tests: Generalized Anxiety Disorder-7 items, Neurological Disorders Depression Inventory for Epilepsy, Epworth Sleepiness Scale, Quality of Life in Epilepsy-10 items, Montreal Cognitive Assessment/Short Test of Mental Status, and Medical Research Council Prognostic Index. The tools summarize brain imaging, blood laboratory, and electroencephalography results, and document neuromodulation treatments. The tools provide Best Practices Advisories and other clinical decision support when appropriate. The tools prompt enrollment in a DNA biobanking study. We have thus far enrolled 231 patients for initial visits and are starting our first annual follow-up visits and provide a brief description of our cohort. We are sharing these EMR tools and captured data with other epilepsy clinics as part of a Neurology Practice Based Research Network, and are using the tools to conduct pragmatic trials using subgroup-based adaptive designs. © 2016 The Authors. Epilepsia published by Wiley Periodicals, Inc. on behalf of International League Against Epilepsy.

Information technology and social sciences: how can health IT be used to support the health professional?

PubMed

Wagner-Menghin, Michaela; Pokieser, Peter

2016-10-01

Keeping up to date with the increasing amount of health-related knowledge and managing the increasing numbers of patients with more complex clinical problems is a challenge for healthcare professionals and healthcare systems. Health IT applications, such as electronic health records or decision-support systems, are meant to support both professionals and their support systems. However, for physicians using these applications, the applications often cause new problems, such as the impracticality of their use in clinical practice. This review adopts a social sciences perspective to understand these problems and derive suggestions for further development. Indeed, humans use tools to remediate the brain's weaknesses and enhance thinking. Available health IT tools have been shaped to fit administrative needs rather than physicians' needs. To increase the beneficial effect of health IT applications in health care, clinicians' style of thinking and their learning needs must be considered when designing and implementing such systems. New health IT tools must be shaped to fit health professionals' needs. To further ease the integration of new health IT tools into clinical practice, we must also consider the effects of implementing new tools on the wider social framework. © 2016 New York Academy of Sciences.

Verification and Validation of NASA-Supported Enhancements to Decision Support Tools of PECAD

NASA Technical Reports Server (NTRS)

Ross, Kenton W.; McKellip, Rodney; Moore, Roxzana F.; Fendley, Debbie

2005-01-01

This section of the evaluation report summarizes the verification and validation (V&V) of recently implemented, NASA-supported enhancements to the decision support tools of the Production Estimates and Crop Assessment Division (PECAD). The implemented enhancements include operationally tailored Moderate Resolution Imaging Spectroradiometer (MODIS) products and products of the Global Reservoir and Lake Monitor (GRLM). The MODIS products are currently made available through two separate decision support tools: the MODIS Image Gallery and the U.S. Department of Agriculture (USDA) Foreign Agricultural Service (FAS) MODIS Normalized Difference Vegetation Index (NDVI) Database. Both the Global Reservoir and Lake Monitor and MODIS Image Gallery provide near-real-time products through PECAD's CropExplorer. This discussion addresses two areas: 1. Assessments of the standard NASA products on which these enhancements are based. 2. Characterizations of the performance of the new operational products.

Multicomponent Musculoskeletal Movement Assessment Tools: A Systematic Review and Critical Appraisal of Their Development and Applicability to Professional Practice.

PubMed

Bennett, Hunter; Davison, Kade; Arnold, John; Slattery, Flynn; Martin, Max; Norton, Kevin

2017-10-01

Multicomponent movement assessment tools have become commonplace to measure movement quality, proposing to indicate injury risk and performance capabilities. Despite popular use, there has been no attempt to compare the components of each tool reported in the literature, the processes in which they were developed, or the underpinning rationale for their included content. As such, the objective of this systematic review was to provide a comprehensive summary of current movement assessment tools and appraise the evidence supporting their development. A systematic literature search was performed using PRISMA guidelines to identify multicomponent movement assessment tools. Commonalities between tools and the evidence provided to support the content of each tool was identified. Each tool underwent critical appraisal to identify the rigor in which it was developed, and its applicability to professional practice. Eleven tools were identified, of which 5 provided evidence to support their content as assessments of movement quality. One assessment tool (Soccer Injury Movement Screen [SIMS]) received an overall score of above 65% on critical appraisal, with a further 2 tools (Movement Competency Screen [MCS] and modified 4 movement screen [M4-MS]) scoring above 60%. Only the MCS provided clear justification for its developmental process. The remaining 8 tools scored between 40 and 60%. On appraisal, the MCS, M4-MS, and SIMS seem to provide the most practical value for assessing movement quality as they provide the strongest reports of developmental rigor and an identifiable evidence base. In addition, considering the evidence provided, these tools may have the strongest potential for identifying performance capabilities and guiding exercise prescription in athletic and sport-specific populations.

Framework Support For Knowledge-Based Software Development

NASA Astrophysics Data System (ADS)

Huseth, Steve

1988-03-01

The advent of personal engineering workstations has brought substantial information processing power to the individual programmer. Advanced tools and environment capabilities supporting the software lifecycle are just beginning to become generally available. However, many of these tools are addressing only part of the software development problem by focusing on rapid construction of self-contained programs by a small group of talented engineers. Additional capabilities are required to support the development of large programming systems where a high degree of coordination and communication is required among large numbers of software engineers, hardware engineers, and managers. A major player in realizing these capabilities is the framework supporting the software development environment. In this paper we discuss our research toward a Knowledge-Based Software Assistant (KBSA) framework. We propose the development of an advanced framework containing a distributed knowledge base that can support the data representation needs of tools, provide environmental support for the formalization and control of the software development process, and offer a highly interactive and consistent user interface.

DEVELOPMENT OF PROTOCOLS AND DECISION SUPPORT TOOLS FOR ASSESSING WATERSHED SYSTEM ASSIMILATIVE

EPA Science Inventory

Investigations are underway on Lake Texoma, a Corps of Engineers lake on the Oklahoma/Texas border, to develop decision support tools and information to evaluate the transport and attenuation of contaminants and stressors in a lake ecosystem, and link them to observable ecologica...

The Use of SMS Support in Programming Education

ERIC Educational Resources Information Center

Kert, Serhat Bahadir

2011-01-01

The rapid developments in the communication technologies today render possible the use of new technological support tools in learning processes. Wireless, or mobile wireless, technologies are the tools whose potential contributions to education are investigated. The potential effects of these technologies on learning are explored through studies…

Supporting Awareness for Augmenting Participation in Collaborative Learning.

ERIC Educational Resources Information Center

Ogata, Hiroaki; Yano, Yoneo

This paper describes Coconuts (Concurrent Collaborative Learning Environment Supported by Awareness), a proposed module of Sharlok (Sharing, Linking and Looking-for Knowledge), an open-ended and collaborative learning environment that integrates a knowledge building tool with a collaborative interface tool. Coconuts was developed in order to…

APPLICATION OF THE US DECISION SUPPORT TOOL FOR MATERIALS AND WASTE MANAGEMENT

EPA Science Inventory

EPA¿s National Risk Management Research Laboratory has led the development of a municipal solid waste decision support tool (MSW-DST). The computer software can be used to calculate life-cycle environmental tradeoffs and full costs of different waste management plans or recycling...

HUMAN HEALTH METRICS FOR ENVIRONMENTAL DECISION SUPPORT TOOLS: LESSONS FROM HEALTH ECONOMICS AND DECISION ANALYSIS

EPA Science Inventory

Decision makers using environmental decision support tools are often confronted with information that predicts a multitude of different human health effects due to environmental stressors. If these health effects need to be contrasted with costs or compared with alternative scena...

Watershed Management Optimization Support Tool (WMOST) v1: Theoretical Documentation

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a screening model that is spatially lumped with options for a daily or monthly time step. It is specifically focused on modeling the effect of management decisions on the watershed. The model considers water flows and ...

Assessing Sustainability of Coral Reef Ecosystem Services using a Spatially-Explicit Decision Support Tool

EPA Science Inventory

Forecasting and communicating the potential outcomes of decision options requires support tools that aid in evaluating alternative scenarios in a user-friendly context and that highlight variables relevant to the decision options and valuable stakeholders. Envision is a GIS-base...

IDSE Version 1 User's Manual

NASA Technical Reports Server (NTRS)

Mayer, Richard

1988-01-01

The integrated development support environment (IDSE) is a suite of integrated software tools that provide intelligent support for information modelling. These tools assist in function, information, and process modeling. Additional tools exist to assist in gathering and analyzing information to be modeled. This is a user's guide to application of the IDSE. Sections covering the requirements and design of each of the tools are presented. There are currently three integrated computer aided manufacturing definition (IDEF) modeling methodologies: IDEF0, IDEF1, and IDEF2. Also, four appendices exist to describe hardware and software requirements, installation procedures, and basic hardware usage.

Tool and data interoperability in the SSE system

NASA Technical Reports Server (NTRS)

Shotton, Chuck

1988-01-01

Information is given in viewgraph form on tool and data interoperability in the Software Support Environment (SSE). Information is given on industry problems, SSE system interoperability issues, SSE solutions to tool and data interoperability, and attainment of heterogeneous tool/data interoperability.

Open ended tubing cutters

NASA Technical Reports Server (NTRS)

Girala, A. S. (Inventor)

1981-01-01

A self clamping cutting tool which includes a handle attached to a C-shaped housing is described. Rotatably mounted within the housing is a C-shaped tool body carrying a set of clamping rolls, two support rolls, and an edged cutting roll (64). The support rolls are disposed to one side of the axis of a pipe and the cutting roll is disposed to the other side of a pipe axis so that these rolls contact a pipe at three circumferential points. Cutter advancing apparatus advance the cutting roll toward the support rollers. The support rolls and cutting roll are rotatable independently of the C-shaped housing. A one way ratchet mechanism disposed between the C-shaped housing and the C-shaped tool body permits operation by movement in one rotational direction about the pipe axis.

EUV mask defect inspection and defect review strategies for EUV pilot line and high volume manufacturing

NASA Astrophysics Data System (ADS)

Chan, Y. David; Rastegar, Abbas; Yun, Henry; Putna, E. Steve; Wurm, Stefan

2010-04-01

Reducing mask blank and patterned mask defects is the number one challenge for extreme ultraviolet lithography. If the industry succeeds in reducing mask blank defects at the required rate of 10X every year for the next 2-3 years to meet high volume manufacturing defect requirements, new inspection and review tool capabilities will soon be needed to support this goal. This paper outlines the defect inspection and review tool technical requirements and suggests development plans to achieve pilot line readiness in 2011/12 and high volume manufacturing readiness in 2013. The technical specifications, tooling scenarios, and development plans were produced by a SEMATECH-led technical working group with broad industry participation from material suppliers, tool suppliers, mask houses, integrated device manufacturers, and consortia. The paper summarizes this technical working group's assessment of existing blank and mask inspection/review infrastructure capabilities to support pilot line introduction and outlines infrastructure development requirements and tooling strategies to support high volume manufacturing.

Conceptual FOM design tool

NASA Astrophysics Data System (ADS)

Krause, Lee S.; Burns, Carla L.

2000-06-01

This paper discusses the research currently in progress to develop the Conceptual Federation Object Model Design Tool. The objective of the Conceptual FOM (C-FOM) Design Tool effort is to provide domain and subject matter experts, such as scenario developers, with automated support for understanding and utilizing available HLA simulation and other simulation assets during HLA Federation development. The C-FOM Design Tool will import Simulation Object Models from HLA reuse repositories, such as the MSSR, to populate the domain space that will contain all the objects and their supported interactions. In addition, the C-FOM tool will support the conversion of non-HLA legacy models into HLA- compliant models by applying proven abstraction techniques against the legacy models. Domain experts will be able to build scenarios based on the domain objects and interactions in both a text and graphical form and export a minimal FOM. The ability for domain and subject matter experts to effectively access HLA and non-HLA assets is critical to the long-term acceptance of the HLA initiative.

Generic Modeling of a Life Support System for Process Technology Comparison

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

1993-01-01

This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support system and process technology options for a Lunar Base with a crew size of 4 and mission lengths of 90 and 600 days. System configurations to minimize the life support system weight and power are explored.

Decision Support in a Changing and Contentious World--Successfully Supporting the Development of a 50-year Comprehensive Coastal Master Plan in Louisiana

NASA Astrophysics Data System (ADS)

Groves, D.

2014-12-01

After the devastating 2005 hurricane season, Louisiana embarked on an ambitious and daunting effort to develop and implement a comprehensive Coastal Master Plan. The Master Plan sought to achieve two key goals simultaneously: reduce hurricane flood risk and halt the net conversion of its coastal landscape to open ocean. Numerous prior efforts to achieve these goals had been tried without significant success. In 2012, however, the Louisiana Coastal Protection and Restoration Authority (CPRA) produced a 50-year, $50 billion Master Plan. It had broad support from a diverse and often adversarial set of stakeholders, and it was unanimously passed by the Louisiana legislature. In contrast to other efforts, CPRA took an approach to planning called by the U.S. National Research Council as "deliberation with analysis". Specifically, CPRA used data, models, and decision support tools not to define an optimal or best strategy, but instead to support stakeholder dialogue and deliberations over alterative coastal management strategies. RAND researchers, with the support of CPRA and other collaborators, developed the planning tool at the center of this process. The CPRA planning tool synthesized large amounts of information about how the coast might evolve over time with and without different combinations of hundreds of different projects and programs. The tool helped CPRA propose alternative strategies that could achieve the State's goals while also highlighting to stakeholders the key tradeoffs among them. Importantly, this process helped bring diverse communities together to support a single vision and specific set of projects and programs to meet many of Louisiana's coastal water resources challenges. This presentation will describe the planning approach and decision support tools developed to support the Master Plan's participatory stakeholder process. The presentation will also highlight several important key takeaway messages that have broad applicability to other water resources planning efforts. Lastly, it will describe several on-going efforts in other parts of the U.S. that are employing this same approach.

Resistance to Organizational Cultural Change in the Military -- A JFO Case Study

DTIC Science & Technology

2008-04-02

is seen by all members as supporting their interests.38 There are many tools to assist in formulating climate or culture change and one such tool ...an important change formulation tool , stood up a training center with excellent support and expert trainers from both services, and set a high...Endnotes 1 R. Dale Jeffery, The Soldier’s Quote Book (Houston, TX: DaVinci Publishing Group, 2000), 119. 2 Robert M. Murphy, Managing Strategic Change

Getting Clearer About Surgical Innovation: A New Definition and a New Tool to Support Responsible Practice.

PubMed

Hutchison, Katrina; Rogers, Wendy; Eyers, Anthony; Lotz, Mianna

2015-12-01

This article presents an original definition of surgical innovation and a practical tool for identifying planned innovations. These will support the responsible introduction of surgical innovations. Frameworks developed for the safer introduction of surgical innovations rely upon identifying cases of innovation; oversight cannot occur unless innovations are identified. However, there is no consensus among surgeons about which interventions they consider innovative; existing definitions are vague and impractical. Using conceptual analysis, this article synthesizes findings from relevant literature, and from qualitative research with surgeons, to develop an original definition of surgical innovation and a tool for prospectively identifying planned surgical innovations. The tool has been developed in light of feedback from health care professionals, surgeons, and policy makers. This definition of innovation distinguishes between variations, introduction of established interventions, and innovations in surgical techniques or use of devices. It can be applied easily and consistently, is sensitive to the key features of innovation (newness and degree of change), is prospective, and focuses on features relevant to safety and evaluation. The accompanying tool is deliberately broad so that appropriate supports may, if necessary, be provided each time that a surgeon does something "new." The definition presented in this article overcomes a number of practical challenges. The definition and tool will be of value in supporting responsible surgical innovation, in particular, through the prospective identification of planned innovations.

A Web-Based Treatment Decision Support Tool for Patients With Advanced Knee Arthritis: Evaluation of User Interface and Content Design.

PubMed

Zheng, Hua; Rosal, Milagros C; Li, Wenjun; Borg, Amy; Yang, Wenyun; Ayers, David C; Franklin, Patricia D

2018-04-30

Data-driven surgical decisions will ensure proper use and timing of surgical care. We developed a Web-based patient-centered treatment decision and assessment tool to guide treatment decisions among patients with advanced knee osteoarthritis who are considering total knee replacement surgery. The aim of this study was to examine user experience and acceptance of the Web-based treatment decision support tool among older adults. User-centered formative and summative evaluations were conducted for the tool. A sample of 28 patients who were considering total knee replacement participated in the study. Participants' responses to the user interface design, the clarity of information, as well as usefulness, satisfaction, and acceptance of the tool were collected through qualitative (ie, individual patient interviews) and quantitative (ie, standardized Computer System Usability Questionnaire) methods. Participants were older adults with a mean age of 63 (SD 11) years. Three-quarters of them had no technical questions using the tool. User interface design recommendations included larger fonts, bigger buttons, less colors, simpler navigation without extra "next page" click, less mouse movement, and clearer illustrations with simple graphs. Color-coded bar charts and outcome-specific graphs with positive action were easiest for them to understand the outcomes data. Questionnaire data revealed high satisfaction with the tool usefulness and interface quality, and also showed ease of use of the tool, regardless of age or educational status. We evaluated the usability of a patient-centered decision support tool designed for advanced knee arthritis patients to facilitate their knee osteoarthritis treatment decision making. The lessons learned can inform other decision support tools to improve interface and content design for older patients' use. ©Hua Zheng, Milagros C Rosal, Wenjun Li, Amy Borg, Wenyun Yang, David C Ayers, Patricia D Franklin. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 30.04.2018.

The GLOBAL Learning and Observations to Benefit the Environment (GLOBE) Collaboration System. Building a robust international collaboration environment for teachers, scientists and students.

NASA Astrophysics Data System (ADS)

Overoye, D.; Lewis, C.

2016-12-01

The Global Learning and Observations to Benefit the Environment (GLOBE) Program is a worldwide hands-on, primary and secondary school-based science and education program founded on Earth Day 1995. Implemented in 117 countries, GLOBE promotes the teaching and learning of science, supporting students, teachers and scientists worldwide to collaborate with each other on inquiry-based investigations of the Earth system. As an international platform supporting a large number and variety of stakeholders, the GLOBE Data Information System (DIS) was re-built with the goal of providing users the support needed to foster and develop collaboration between teachers, students and scientists while supporting the collection and visualization of over 50 different earth science investigations (protocols). There have been many challenges to consider as we have worked to prototype and build various tools to support collaboration across the GLOBE community - language, security, time zones, user roles and the Child Online Protection Act (COPA) to name a few. During the last 3 years the re-built DIS has been in operation we have supported user to user collaboration, school to school collaboration, project/campaign to user collaboration and scientist to scientist collaboration. We have built search tools to facilitate finding collaboration partners. The tools and direction continue to evolve based on feedback, evolving needs and changes in technology. With this paper we discuss our approach for dealing with some of the collaboration challenges, review tools built to encourage and support collaboration, and analyze which tools have been successful and which have not. We will review new ideas for collaboration in the GLOBE community that are guiding upcoming development.

The fourth dimension of tool use: temporally enduring artefacts aid primates learning to use tools

PubMed Central

Fragaszy, D. M.; Biro, D.; Eshchar, Y.; Humle, T.; Izar, P.; Resende, B.; Visalberghi, E.

2013-01-01

All investigated cases of habitual tool use in wild chimpanzees and capuchin monkeys include youngsters encountering durable artefacts, most often in a supportive social context. We propose that enduring artefacts associated with tool use, such as previously used tools, partly processed food items and residual material from previous activity, aid non-human primates to learn to use tools, and to develop expertise in their use, thus contributing to traditional technologies in non-humans. Therefore, social contributions to tool use can be considered as situated in the three dimensions of Euclidean space, and in the fourth dimension of time. This notion expands the contribution of social context to learning a skill beyond the immediate presence of a model nearby. We provide examples supporting this hypothesis from wild bearded capuchin monkeys and chimpanzees, and suggest avenues for future research. PMID:24101621

The fourth dimension of tool use: temporally enduring artefacts aid primates learning to use tools.

PubMed

Fragaszy, D M; Biro, D; Eshchar, Y; Humle, T; Izar, P; Resende, B; Visalberghi, E

2013-11-19

All investigated cases of habitual tool use in wild chimpanzees and capuchin monkeys include youngsters encountering durable artefacts, most often in a supportive social context. We propose that enduring artefacts associated with tool use, such as previously used tools, partly processed food items and residual material from previous activity, aid non-human primates to learn to use tools, and to develop expertise in their use, thus contributing to traditional technologies in non-humans. Therefore, social contributions to tool use can be considered as situated in the three dimensions of Euclidean space, and in the fourth dimension of time. This notion expands the contribution of social context to learning a skill beyond the immediate presence of a model nearby. We provide examples supporting this hypothesis from wild bearded capuchin monkeys and chimpanzees, and suggest avenues for future research.

The Pathway Tools software.

PubMed

Karp, Peter D; Paley, Suzanne; Romero, Pedro

2002-01-01

Bioinformatics requires reusable software tools for creating model-organism databases (MODs). The Pathway Tools is a reusable, production-quality software environment for creating a type of MOD called a Pathway/Genome Database (PGDB). A PGDB such as EcoCyc (see http://ecocyc.org) integrates our evolving understanding of the genes, proteins, metabolic network, and genetic network of an organism. This paper provides an overview of the four main components of the Pathway Tools: The PathoLogic component supports creation of new PGDBs from the annotated genome of an organism. The Pathway/Genome Navigator provides query, visualization, and Web-publishing services for PGDBs. The Pathway/Genome Editors support interactive updating of PGDBs. The Pathway Tools ontology defines the schema of PGDBs. The Pathway Tools makes use of the Ocelot object database system for data management services for PGDBs. The Pathway Tools has been used to build PGDBs for 13 organisms within SRI and by external users.

Team Collaboration: Lessons Learned Report

NASA Technical Reports Server (NTRS)

Arterberrie, Rhonda Y.; Eubanks, Steven W.; Kay, Dennis R.; Prahst, Stephen E.; Wenner, David P.

2005-01-01

An Agency team collaboration pilot was conducted from July 2002 until June 2003 and then extended for an additional year. The objective of the pilot was to assess the value of collaboration tools and adoption processes as applied to NASA teams. In an effort to share knowledge and experiences, the lessons that have been learned thus far are documented in this report. Overall, the pilot has been successful. An entire system has been piloted - tools, adoption, and support. The pilot consisted of two collaboration tools, a team space and a virtual team meeting capability. Of the two tools that were evaluated, the team meeting tool has been more widely accepted. Though the team space tool has been met with a lesser degree of acceptance, the need for such a tool in the NASA environment has been evidenced. Both adoption techniques and support were carefully developed and implemented in a way that has been well received by the pilot participant community.

Rubric Authoring Tool Supporting Cognitive Skills Assessment across an Institution

ERIC Educational Resources Information Center

Simper, Natalie

2018-01-01

This paper explores a method to support instructors in assessing cognitive skills in their course, designed to enable aggregation of data across an institution. A rubric authoring tool, "BASICS" (Building Assessment Scaffolds for Intellectual Cognitive Skills) was built as part of the Queen's University Learning Outcomes Assessment (LOA)…

End of Asset Life Reinvestment Decision Support Tool (INFR2R11AT)

EPA Science Inventory

This “End of Asset Life” Reinvestment Decision-Support Tool is intended as a step by step guide for the asset management practitioner who faces the challenge of developing an investment strategy that represents the best integration of maintenance, operations, and capital investme...

Hybrid E-Learning Tool TransLearning: Video Storytelling to Foster Vicarious Learning within Multi-Stakeholder Collaboration Networks

ERIC Educational Resources Information Center

van der Meij, Marjoleine G.; Kupper, Frank; Beers, Pieter J.; Broerse, Jacqueline E. W.

2016-01-01

E-learning and storytelling approaches can support informal vicarious learning within geographically widely distributed multi-stakeholder collaboration networks. This case study evaluates hybrid e-learning and video-storytelling approach "TransLearning" by investigation into how its storytelling e-tool supported informal vicarious…

Watershed forest management using decision support technology

Treesearch

Mark Twery; Robert Northrop

2004-01-01

Using innovative partnerships and a variety of decision support tools, we identified the needs and goals of Baltimore, Maryland, for their reservoir properties containing over 17000 forested acres; developed a management plan; determined the information necessary to evaluate conditions, processes, and context; chose tools to use; collected, organized, and analyzed data...

Informal Assessment as a Tool for Supporting Parent Partnerships

ERIC Educational Resources Information Center

Darragh, Johnna

2009-01-01

Many strategies contribute to forming co-constructed relationships. However, one of the most effective tools that supports co-construction is ongoing assessment, which provides a common base (knowledge of the child) on which families and professionals can build relationships. As a part of this ongoing assessment, informal strategies--including…

30 CFR 75.214 - Supplemental support materials, equipment and tools.

Code of Federal Regulations, 2010 CFR

2010-07-01

... tools. 75.214 Section 75.214 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Roof Support § 75... accessible location on each working section or within four crosscuts of each working section. (b) The...

Sight Application Analysis Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bronevetsky, G.

2014-09-17

The scale and complexity of scientific applications makes it very difficult to optimize, debug and extend them to support new capabilities. We have developed a tool that supports developers’ efforts to understand the logical flow of their applications and interactions between application components and hardware in a way that scales with application complexity and parallelism.

A decision support tool for vehicle infrastructure integration : understanding information effects and advancing data fusion algorithms for traffic management applications.

DOT National Transportation Integrated Search

2009-10-15

This research seeks to explore vehicle-to-vehicle information networks to understand the interplay : between the information communicated and traffic conditions on the network. A longer-term goal is to : develop a decision support tool for processing...

78 FR 76822 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... missiles, containers, spare and repair parts, support equipment, tools and test equipment, publications and... missiles, 7 Fly-to-Buy TOW2A missiles, containers, spare and repair parts, support equipment, tools and... thermal) for the launcher to track and guide the missile in flight. Guidance commands from the launcher...

Mobile Adaptive Communication Support for Vocabulary Acquisition

ERIC Educational Resources Information Center

Epp, Carrie Demmans

2014-01-01

This work explores the use of an adaptive mobile tool for language learning. A school-based deployment study showed that the tool supported learning. A second study is being conducted in informal learning environments. Current work focuses on building models that increase our understanding of the relationship between application usage and learning.

BASINs 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual (Final Report)

EPA Science Inventory

EPA announced the availability of the report, BASINS 4.0 Climate Assessment Tool (CAT): Supporting Documentation and User's Manual. This report was prepared by the EPA's Global Change Research Program (GCRP), an assessment-oriented program, that sits within the Office of R...

Barriers to Technology Use in Large and Small School Districts

ERIC Educational Resources Information Center

Francom, Gregory M.

2016-01-01

Barriers to effective technology integration come in several different categories, including access to technology tools and resources, technology training and support, administrative support, time to plan and prepare for technology integration, and beliefs about the importance and usefulness of technology tools and resources. This study used…

WikiBuild: A New Application to Support Patient and Health Care Professional Involvement in the Development of Patient Support Tools

PubMed Central

2011-01-01

Active patient and public involvement as partners in their own health care and in the development of health services is key to achieving a health care system that is responsive to patients’ needs and values. It promotes better use of the health care system, and improves health outcomes, quality of life and patient satisfaction. By involving patients and health care professionals as partners in the creation and updating of patient health support tools, wikis—highly accessible, interactive vehicles of communication—have the potential to empower users to implement these support tools in daily life. Acknowledging the potential of wikis, and recognizing that they capitalize on the free and open access to information, scientists, opinion leaders and patient advocates have suggested that wikis could help decision-making constituencies improve the delivery of health care. They might also decrease its cost and improve access to knowledge within developing countries. However, little is known about the efficacy of wikis in helping to attain these goals. There is also a need to know more about the intention of patients and health care workers to use wikis, in what circumstances and what factors will influence their use of wikis. In this issue of the Journal of Medical Internet Research, Gupta et al describe how they developed and tested a new wiki-inspired application to improve asthma care. The researchers involved patients with asthma, primary care physicians, pulmonologists and certified asthma educators in the construction of an asthma action plan. Their paper—entitled “WikiBuild: a new online collaboration process for multistakeholder tool development and consensus building”—is the first description of a wiki-inspired technology built to involve patients and health care professionals in the development of a patient support tool. This innovative study has made important contributions toward how wikis could be generalized to involve multiple stakeholders in the development of other knowledge translation tools such as clinical practice guidelines or decision aids. More specifically, Gupta et al have uncovered potential action mechanisms toward increasing usage of these tools by patients and health care professionals. These are decreasing hierarchical influences, increasing usability and adapting a tool to local context. More research is now needed to determine if the use of the resulting wiki-developed plan will actually be higher than a plan developed using other methods. Furthermore, there is also a need to assess the intention of participants to continue using wiki-based processes on an ongoing basis. It is in this dynamic and continuous retroaction loop that the support tool users—both patients and health care professionals—can adapt and improve the product after its real-life shortcomings are revealed and as new evidence becomes available. As such, a wiki would be more than a simple patient support development tool, but could also become a dynamic and interactive repository and delivery tool that would facilitate ongoing and sustainable patient and professional engagement. PMID:22155746

Preparing for the future: a review of tools and strategies to support autonomous goal setting for children and youth with autism spectrum disorders.

PubMed

Hodgetts, Sandra; Park, Elly

2017-03-01

Despite recognized benefits, current clinical practice rarely includes direct input from children and youth with autism spectrum disorder (ASD) in setting rehabilitation goals. This study reviews tools and evidence-based strategies to assist with autonomous goal settings for children and youth with ASD. This study included two components: (1) A scoping review of existing tools and strategies to assist with autonomous goal setting in individuals with ASD and (2) a chart review of inter-disciplinary service plan goals for children and youth with ASD. Eleven data sources, evaluating five different tools to assist with autonomous goal setting for children and youth with ASD, were found. Three themes emerged from the integration of the scoping review and chart review, which are discussed in the paper: (1) generalizability of findings, (2) adaptations to support participation and (3) practice implications. Children and youth with ASD can participate in setting rehabilitation goals, but few tools to support their participation have been evaluated, and those tools that do exist do not align well with current services foci. Visual aids appear to be one effective support, but further research on effective strategies for meaningful engagement in autonomous goal setting for children and youth with ASD is warranted. Implications for rehabilitation Persons with ASD are less self-determined than their peers. Input into one's own rehabilitation goals and priorities is an important component of self-determination. Few tools exist to help engage children and youth with ASD in setting their own rehabilitation goals. An increased focus on identifying, developing and evaluating effective tools and strategies to facilitate engagement of children and youth with ASD in setting their own rehabilitation goals is warranted.

Development of an After-Sales Support Inter-Enterprise Collaboration System Using Information Technologies

NASA Astrophysics Data System (ADS)

Kimura, Toshiaki; Kasai, Fumio; Kamio, Yoichi; Kanda, Yuichi

This research paper discusses a manufacturing support system which supports not only maintenance services but also consulting services for manufacturing systems consisting of multi-vendor machine tools. In order to do this system enables inter-enterprise collaboration between engineering companies and machine tool vendors. The system is called "After-Sales Support Inter-enterprise collaboration System using information Technologies" (ASSIST). This paper describes the concept behind the planned ASSIST, the development of a prototype of the system, and discusses test operation results of the system.

Creating and sharing clinical decision support content with Web 2.0: Issues and examples.

PubMed

Wright, Adam; Bates, David W; Middleton, Blackford; Hongsermeier, Tonya; Kashyap, Vipul; Thomas, Sean M; Sittig, Dean F

2009-04-01

Clinical decision support is a powerful tool for improving healthcare quality and patient safety. However, developing a comprehensive package of decision support interventions is costly and difficult. If used well, Web 2.0 methods may make it easier and less costly to develop decision support. Web 2.0 is characterized by online communities, open sharing, interactivity and collaboration. Although most previous attempts at sharing clinical decision support content have worked outside of the Web 2.0 framework, several initiatives are beginning to use Web 2.0 to share and collaborate on decision support content. We present case studies of three efforts: the Clinfowiki, a world-accessible wiki for developing decision support content; Partners Healthcare eRooms, web-based tools for developing decision support within a single organization; and Epic Systems Corporation's Community Library, a repository for sharing decision support content for customers of a single clinical system vendor. We evaluate the potential of Web 2.0 technologies to enable collaborative development and sharing of clinical decision support systems through the lens of three case studies; analyzing technical, legal and organizational issues for developers, consumers and organizers of clinical decision support content in Web 2.0. We believe the case for Web 2.0 as a tool for collaborating on clinical decision support content appears strong, particularly for collaborative content development within an organization.

Facilitation of Function and Manipulation Knowledge of Tools Using Transcranial Direct Current Stimulation (tDCS).

PubMed

Ishibashi, Ryo; Mima, Tatsuya; Fukuyama, Hidenao; Pobric, Gorana

2017-01-01

Using a variety of tools is a common and essential component of modern human life. Patients with brain damage or neurological disorders frequently have cognitive deficits in their recognition and manipulation of tools. In this study, we focused on improving tool-related cognition using transcranial direct current stimulation (tDCS). Converging evidence from neuropsychology, neuroimaging and non- invasive brain stimulation has identified the anterior temporal lobe (ATL) and inferior parietal lobule (IPL) as brain regions supporting action semantics. We observed enhanced performance in tool cognition with anodal tDCS over ATL and IPL in two cognitive tasks that require rapid access to semantic knowledge about the function or manipulation of common tools. ATL stimulation improved access to both function and manipulation knowledge of tools. The effect of IPL stimulation showed a trend toward better manipulation judgments. Our findings support previous studies of tool semantics and provide a novel approach for manipulation of underlying circuits.

Concurrent Design used in the Design of Space Instruments

NASA Technical Reports Server (NTRS)

Oxnevad, Knut I.

1998-01-01

At the Project Design Center at the Jet Propulsion Laboratory, a concurrent design environment is under development for supporting development and analyses of space instruments in the early, conceptual design phases. This environment is being utilized by a Team I, a multidisciplinary group of experts. Team I is providing study and proposal support. To provide the required support, the Team I concurrent design environment features effectively interconnected high-end optics, CAD, and thermal design and analysis tools. Innovative approaches for linking tools, and for transferring files between applications have been implemented. These approaches together with effective sharing of geometry between the optics, CAD, and thermal tools are already showing significant timesavings.

Design, development, and fabrication of extravehicular activity tools for support of the transfer orbit stage

NASA Technical Reports Server (NTRS)

Albritton, L. M.; Redmon, J. W.; Tyler, T. R.

1993-01-01

Seven extravehicular activity (EVA) tools and a tool carrier have been designed and developed by MSFC in order to provide a two fault tolerant system for the transfer orbit stage (TOS) shuttle mission. The TOS is an upper stage booster for delivering payloads to orbits higher than the shuttle can achieve. Payloads are required not to endanger the shuttle even after two failures have occurred. The Airborne Support Equipment (ASE), used in restraining and deploying TOS, does not meet this criteria. The seven EVA tools designed will provide the required redundancy with no impact to the TOS hardware.

Current State and Model for Development of Technology-Based Care for Attention Deficit Hyperactivity Disorder.

PubMed

Benyakorn, Songpoom; Riley, Steven J; Calub, Catrina A; Schweitzer, Julie B

2016-09-01

Care (i.e., evaluation and intervention) delivered through technology is used in many areas of mental health services, including for persons with attention deficit hyperactivity disorder (ADHD). Technology can facilitate care for individuals with ADHD, their parents, and their care providers. The adoption of technological tools for ADHD care requires evidence-based studies to support the transition from development to integration into use in the home, school, or work for persons with the disorder. The initial phase, which is development of technological tools, has begun in earnest; however, the evidence base for many of these tools is lacking. In some instances, the uptake of a piece of technology into home use or clinical practice may be further along than the research to support its use. In this study, we review the current evidence regarding technology for ADHD and also propose a model to evaluate the support for other tools that have yet to be tested. We propose using the Research Domain Criteria as a framework for evaluating the tools' relationships to dimensions related to ADHD. This article concludes with recommendations for testing new tools that may have promise in improving the evaluation or treatment of persons with ADHD.

Accessibility, usability, and usefulness of a Web-based clinical decision support tool to enhance provider-patient communication around Self-management TO Prevent (STOP) Stroke.

PubMed

Anderson, Jane A; Godwin, Kyler M; Saleem, Jason J; Russell, Scott; Robinson, Joshua J; Kimmel, Barbara

2014-12-01

This article reports redesign strategies identified to create a Web-based user-interface for the Self-management TO Prevent (STOP) Stroke Tool. Members of a Stroke Quality Improvement Network (N = 12) viewed a visualization video of a proposed prototype and provided feedback on implementation barriers/facilitators. Stroke-care providers (N = 10) tested the Web-based prototype in think-aloud sessions of simulated clinic visits. Participants' dialogues were coded into themes. Access to comprehensive information and the automated features/systematized processes were the primary accessibility and usability facilitator themes. The need for training, time to complete the tool, and computer-centric care were identified as possible usability barriers. Patient accountability, reminders for best practice, goal-focused care, and communication/counseling themes indicate that the STOP Stroke Tool supports the paradigm of patient-centered care. The STOP Stroke Tool was found to prompt clinicians on secondary stroke-prevention clinical-practice guidelines, facilitate comprehensive documentation of evidence-based care, and support clinicians in providing patient-centered care through the shared decision-making process that occurred while using the action-planning/goal-setting feature of the tool. © The Author(s) 2013.

SMARTE: SUSTAINABLE MANAGEMENT APPROACHES AND REVITALIZATION TOOLS-ELECTRONIC (BELFAST, IRELAND)

EPA Science Inventory

The U.S.-German Bilateral Working Group is developing Site-specific Management Approaches and Redevelopment Tools (SMART). In the U.S., the SMART compilation is housed in a web-based, decision support tool called SMARTe. All tools within SMARTe that are developed specifically for...

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2014 CFR

2014-01-01

...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life...

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life...

41 CFR 102-80.120 - What analytical and empirical tools should be used to support the life safety equivalency...

Code of Federal Regulations, 2012 CFR

2012-01-01

...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 80-SAFETY AND ENVIRONMENTAL MANAGEMENT Accident and Fire... used to support the life safety equivalency evaluation? Analytical and empirical tools, including fire models and grading schedules such as the Fire Safety Evaluation System (Alternative Approaches to Life...

A GIS BASED DECISION SUPPORT SYSTEM AND RESOURCE TOOL FOR USE ON STUDIES OF THE LAKE TEXOMA ECOSYSTEM

EPA Science Inventory

Investigations are underway at Lake Texoma, to develop decision support tools and information to evaluate the transport and attenuation of contaminants and stressors in a lake ecosystem, and link them to observable ecological effects. The U.S. EPA, USGS, U. S. Army Corps of Eng...

Interdisciplinary Facilities that Support Collaborative Teaching and Learning

ERIC Educational Resources Information Center

Asoodeh, Mike; Bonnette, Roy

2006-01-01

It has become widely accepted that the computer is an indispensable tool in the study of science and technology. Thus, in recent years curricular programs such as Industrial Technology and associated scientific disciplines have been adopting and adapting the computer as a tool in new and innovative ways to support teaching, learning, and research.…

A Web-Based Tool to Support Data-Based Early Intervention Decision Making

ERIC Educational Resources Information Center

Buzhardt, Jay; Greenwood, Charles; Walker, Dale; Carta, Judith; Terry, Barbara; Garrett, Matthew

2010-01-01

Progress monitoring and data-based intervention decision making have become key components of providing evidence-based early childhood special education services. Unfortunately, there is a lack of tools to support early childhood service providers' decision-making efforts. The authors describe a Web-based system that guides service providers…

The MATH--Open Source Application for Easier Learning of Numerical Mathematics

ERIC Educational Resources Information Center

Glaser-Opitz, Henrich; Budajová, Kristina

2016-01-01

The article introduces a software application (MATH) supporting an education of Applied Mathematics, with focus on Numerical Mathematics. The MATH is an easy to use tool supporting various numerical methods calculations with graphical user interface and integrated plotting tool for graphical representation written in Qt with extensive use of Qwt…

Development of Assessment Tools To Measure Organizational Support for Employee Health.

ERIC Educational Resources Information Center

Golaszewski, Thomas; Barr, Donald; Pronk, Nico

2003-01-01

Describes one working group's attempts to develop and utilize assessment tools for measuring and changing organizational support for employee health. Originally designed as part of a heart health related intervention, the system has evolved into a managed care evaluation and major chronic disease inventory. Findings indicate the potential of…

Tools for Teaching Change Management: The Matrix of Change and Supporting Software.

ERIC Educational Resources Information Center

Brynjolfsson, Erik; van Alstyne, Marshall; Bernstein, Abraham; Renshaw, Amy Austin

This paper presents recent developments in provision of support tools for change management and explains how they have been effectively used for teaching students about information technology (IT)-enabled change management in the core IT classes at MIT (Massachusetts Institute of Technology) and Stanford University (California). It also describes…

"Dear Fresher …"--How Online Questionnaires Can Improve Learning and Teaching Statistics

ERIC Educational Resources Information Center

Bebermeier, Sarah; Nussbeck, Fridtjof W.; Ontrup, Greta

2015-01-01

Lecturers teaching statistics are faced with several challenges supporting students' learning in appropriate ways. A variety of methods and tools exist to facilitate students' learning on statistics courses. The online questionnaires presented in this report are a new, slightly different computer-based tool: the central aim was to support students…

Development of a 2nd Generation Decision Support Tool to Optimize Resource and Energy Recovery for Municipal Solid Waste

EPA Science Inventory

In 2012, EPA’s Office of Research and Development released the MSW decision support tool (MSW-DST) to help identify strategies for more sustainable MSW management. Depending upon local infrastructure, energy grid mix, population density, and waste composition and quantity, the m...

Using Mobile Phones in Support of Student Learning in Secondary Science Inquiry Classrooms

ERIC Educational Resources Information Center

Khoo, Elaine; Otrel-Cass, Kathrin

2017-01-01

This paper reports on findings from a research project concerned with how electronic networking tools (e-networked tools), such as the Internet, online forums, and mobile technologies, can support authentic science inquiry in junior secondary classrooms. It focuses on three qualitative case studies involving science teachers from two high schools…

The Design and Development of a Computerized Tool Support for Conducting Senior Projects in Software Engineering Education

ERIC Educational Resources Information Center

Chen, Chung-Yang; Teng, Kao-Chiuan

2011-01-01

This paper presents a computerized tool support, the Meetings-Flow Project Collaboration System (MFS), for designing, directing and sustaining the collaborative teamwork required in senior projects in software engineering (SE) education. Among many schools' SE curricula, senior projects serve as a capstone course that provides comprehensive…

Framework to parameterize and validate APEX to support deployment of the nutrient tracking tool

USDA-ARS?s Scientific Manuscript database

Guidelines have been developed to parameterize and validate the Agricultural Policy Environmental eXtender (APEX) to support the Nutrient Tracking Tool (NTT). This follow-up paper presents 1) a case study to illustrate how the developed guidelines are applied in a headwater watershed located in cent...

The Feedback Environment Scale: Construct Definition, Measurement, and Validation

ERIC Educational Resources Information Center

Steelman, Lisa A.; Levy, Paul E.; Snell, Andrea F.

2004-01-01

Managers are increasingly being held accountable for providing resources that support employee development, particularly in the form of feedback and coaching. To support managers as trainers and coaches, organizations must provide managers with the tools they need to succeed in this area. This article presents a new tool to assist in the diagnosis…

Using Guided Participation to Support Young Children's Social Development

ERIC Educational Resources Information Center

Petty, Karen

2009-01-01

Families and teachers spend countless hours supporting preschoolers and primary age children in the development of mental tools like focus, memory, and other problem-solving skills that help children think better, pay attention, and remember what they have experienced. Children use these tools to succeed in reading, writing, math, science, and…

Building Culturally & Linguistically Competent Services to Support Young Children, Their Families, and School Readiness

ERIC Educational Resources Information Center

Hepburn, Kathy Seitzinger

2004-01-01

The purpose of this tool kit is to provide guidance, tools, and resources that will assist communities in building culturally and linguistically competent services, supports, programs, and practices related to young children, their families. By offering services in culturally and linguistically meaningful ways, communities can engage all families…

The Integrated Medical Model - A Risk Assessment and Decision Support Tool for Human Space Flight Missions

NASA Technical Reports Server (NTRS)

Kerstman, Eric; Minard, Charles G.; Saile, Lynn; FreiredeCarvalho, Mary; Myers, Jerry; Walton, Marlei; Butler, Douglas; Lopez, Vilma

2010-01-01

The Integrated Medical Model (IMM) is a decision support tool that is useful to space flight mission planners and medical system designers in assessing risks and optimizing medical systems. The IMM employs an evidence-based, probabilistic risk assessment (PRA) approach within the operational constraints of space flight.

Solving Additive Problems at Pre-Elementary School Level with the Support of Graphical Representation

ERIC Educational Resources Information Center

Selva, Ana Coelho Vieira; Falcao, Jorge Tarcisio da Rocha; Nunes, Terezinha

2005-01-01

This research offers empirical evidence of the importance of supplying diverse symbolic representations in order to support concept development in mathematics. Graphical representation can be a helpful symbolic tool for concept development in the conceptual field of additive structures. Nevertheless, this symbolic tool has specific difficulties…

Request for Support: A Tool for Strengthening Network Capacity

ERIC Educational Resources Information Center

Bain, Jamie; Harden, Noelle; Heim, Stephanie

2017-01-01

A request for support (RFS) is a tool that is used to strengthen network capacity by prioritizing needs and optimizing learning opportunities. Within University of Minnesota Extension, we implemented an RFS process through an online survey designed to help leaders of food networks identify and rank learning and capacity-building needs and indicate…

Tools of the Trade for More Effective Instructional Leaders.

ERIC Educational Resources Information Center

Pino, Edward C.

1988-01-01

Instructional leaders need a sturdy support system and a sound background in clinical supervision to be effective administrators. This article identifies three vital tools of the trade: a specific set of basic skills for quality teaching; a support system for each teaching skill; and a dependable, flexible, and personalized delivery system. (MLH)

An approach to improve the care of mid-life women through the implementation of a Women’s Health Assessment Tool/Clinical Decision Support toolkit

PubMed Central

Silvestrin, Terry M; Steenrod, Anna W; Coyne, Karin S; Gross, David E; Esinduy, Canan B; Kodsi, Angela B; Slifka, Gayle J; Abraham, Lucy; Araiza, Anna L; Bushmakin, Andrew G; Luo, Xuemei

2016-01-01

The objectives of this study are to describe the implementation process of the Women’s Health Assessment Tool/Clinical Decision Support toolkit and summarize patients’ and clinicians’ perceptions of the toolkit. The Women’s Health Assessment Tool/Clinical Decision Support toolkit was piloted at three clinical sites over a 4-month period in Washington State to evaluate health outcomes among mid-life women. The implementation involved a multistep process and engagement of multiple stakeholders over 18 months. Two-thirds of patients (n = 76/110) and clinicians (n = 8/12) participating in pilot completed feedback surveys; five clinicians participated in qualitative interviews. Most patients felt more prepared for their annual visit (69.7%) and that quality of care improved (68.4%) while clinicians reported streamlined patient visits and improved communication with patients. The Women’s Health Assessment Tool/Clinical Decision Support toolkit offers a unique approach to introduce and address some of the key health issues that affect mid-life women. PMID:27558508

Air Traffic Management Research at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Lee, Katharine

2005-01-01

Since the late 1980's, NASA Ames researchers have been investigating ways to improve the air transportation system through the development of decision support automation. These software advances, such as the Center-TRACON Automation System (eTAS) have been developed with teams of engineers, software developers, human factors experts, and air traffic controllers; some ASA Ames decision support tools are currently operational in Federal Aviation Administration (FAA) facilities and some are in use by the airlines. These tools have provided air traffic controllers and traffic managers the capabilities to help reduce overall delays and holding, and provide significant cost savings to the airlines as well as more manageable workload levels for air traffic service providers. NASA is continuing to collaborate with the FAA, as well as other government agencies, to plan and develop the next generation of decision support tools that will support anticipated changes in the air transportation system, including a projected increase to three times today's air-traffic levels by 2025. The presentation will review some of NASA Ames' recent achievements in air traffic management research, and discuss future tool developments and concepts currently under consideration.

A web-based decision support tool for prognosis simulation in multiple sclerosis.

PubMed

Veloso, Mário

2014-09-01

A multiplicity of natural history studies of multiple sclerosis provides valuable knowledge of the disease progression but individualized prognosis remains elusive. A few decision support tools that assist the clinician in such task have emerged but have not received proper attention from clinicians and patients. The objective of the current work is to implement a web-based tool, conveying decision relevant prognostic scientific evidence, which will help clinicians discuss prognosis with individual patients. Data were extracted from a set of reference studies, especially those dealing with the natural history of multiple sclerosis. The web-based decision support tool for individualized prognosis simulation was implemented with NetLogo, a program environment suited for the development of complex adaptive systems. Its prototype has been launched online; it enables clinicians to predict both the likelihood of CIS to CDMS conversion, and the long-term prognosis of disability level and SPMS conversion, as well as assess and monitor the effects of treatment. More robust decision support tools, which convey scientific evidence and satisfy the needs of clinical practice by helping clinicians discuss prognosis expectations with individual patients, are required. The web-based simulation model herein introduced proposes to be a step forward toward this purpose. Copyright © 2014 Elsevier B.V. All rights reserved.

Implementing a social network intervention designed to enhance and diversify support for people with long-term conditions. A qualitative study.

PubMed

Kennedy, Anne; Vassilev, Ivaylo; James, Elizabeth; Rogers, Anne

2016-02-29

For people with long-term conditions, social networks provide a potentially central means of mobilising, mediating and accessing support for health and well-being. Few interventions address the implementation of improving engagement with and through social networks. This paper describes the development and implementation of a web-based tool which comprises: network mapping, user-centred preference elicitation and need assessment and facilitated engagement with resources. The study aimed to determine whether the intervention was acceptable, implementable and acted to enhance support and to add to theory concerning social networks and engagement with resources and activities. A longitudinal design with 15 case studies used ethnographic methods comprising video, non-participant observation of intervention delivery and qualitative interviews (baseline, 6 and 12 months). Participants were people with type 2 diabetes living in a marginalised island community. Facilitators were local health trainers and care navigators. Analysis applied concepts concerning implementation of technology for self-management support to explain how new practices of work were operationalised and how the technology impacted on relationships fit with everyday life and allowed for visual feedback. Most participants reported identifying and taking up new activities as a result of using the tool. Thematic analysis suggested that workability of the tool was predicated on disruption and reconstruction of networks, challenging/supportive facilitation and change and reflection over time concerning network support. Visualisation of the network enabled people to mobilise support and engage in new activities. The tool aligned synergistically with the facilitators' role of linking people to local resources. The social network tool works through a process of initiating positive disruption of established self-management practice through mapping and reflection on personal network membership and support. This opens up possibilities for reconstructing self-management differently from current practice. Key facets of successful implementation were: the visual maps of networks and support options; facilitation characterised by a perceived lack of status difference which assisted engagement and constructive discussion of support and preferences for activities; and background work (a reliable database, tailored preferences, option reduction) for facilitator and user ease of use.

Can Interactive Visualization Tools Engage and Support Pre-University Students in Exploring Non-Trivial Mathematical Concepts?

ERIC Educational Resources Information Center

Liang, Hai-Ning; Sedig, Kamran

2010-01-01

Many students find it difficult to engage with mathematical concepts. As a relatively new class of learning tools, visualization tools may be able to promote higher levels of engagement with mathematical concepts. Often, development of new tools may outpace empirical evaluations of the effectiveness of these tools, especially in educational…

Open Educational Resources in Support of Science Learning: Tools for Inquiry and Observation

ERIC Educational Resources Information Center

Scanlon, Eileen

2012-01-01

This article focuses on the potential of free tools, particularly inquiry tools for influencing participation in twenty-first-century learning in science, as well as influencing the development of communities around tools. Two examples are presented: one on the development of an open source tool for structured inquiry learning that can bridge the…

Key stakeholders' perceptions of the acceptability and usefulness of a tablet-based tool to improve communication and shared decision making in ICUs.

PubMed

Ernecoff, Natalie C; Witteman, Holly O; Chon, Kristen; Chen, Yanquan Iris; Buddadhumaruk, Praewpannarai; Chiarchiaro, Jared; Shotsberger, Kaitlin J; Shields, Anne-Marie; Myers, Brad A; Hough, Catherine L; Carson, Shannon S; Lo, Bernard; Matthay, Michael A; Anderson, Wendy G; Peterson, Michael W; Steingrub, Jay S; Arnold, Robert M; White, Douglas B

2016-06-01

Although barriers to shared decision making in intensive care units are well documented, there are currently no easily scaled interventions to overcome these problems. We sought to assess stakeholders' perceptions of the acceptability, usefulness, and design suggestions for a tablet-based tool to support communication and shared decision making in ICUs. We conducted in-depth semi-structured interviews with 58 key stakeholders (30 surrogates and 28 ICU care providers). Interviews explored stakeholders' perceptions about the acceptability of a tablet-based tool to support communication and shared decision making, including the usefulness of modules focused on orienting families to the ICU, educating them about the surrogate's role, completing a question prompt list, eliciting patient values, educating about treatment options, eliciting perceptions about prognosis, and providing psychosocial support resources. The interviewer also elicited stakeholders' design suggestions for such a tool. We used constant comparative methods to identify key themes that arose during the interviews. Overall, 95% (55/58) of participants perceived the proposed tool to be acceptable, with 98% (57/58) of interviewees finding six or more of the seven content domains acceptable. Stakeholders identified several potential benefits of the tool including that it would help families prepare for the surrogate role and for family meetings as well as give surrogates time and a framework to think about the patient's values and treatment options. Key design suggestions included: conceptualize the tool as a supplement to rather than a substitute for surrogate-clinician communication; make the tool flexible with respect to how, where, and when surrogates can access the tool; incorporate interactive exercises; use video and narration to minimize the cognitive load of the intervention; and build an extremely simple user interface to maximize usefulness for individuals with low computer literacy. There is broad support among stakeholders for the use of a tablet-based tool to improve communication and shared decision making in ICUs. Eliciting the perspectives of key stakeholders early in the design process yielded important insights to create a tool tailored to the needs of surrogates and care providers in ICUs. Copyright © 2016 Elsevier Inc. All rights reserved.

76 FR 11361 - Defense Federal Acquisition Regulation Supplement; Preservation of Tooling for Major Defense...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... tooling, but should include ``all property, i.e., special test equipment, ground support equipment, machine tools and machines and other intangibles to maintain capability.'' Response: DoD is fully...

XMI2USE: A Tool for Transforming XMI to USE Specifications

NASA Astrophysics Data System (ADS)

Sun, Wuliang; Song, Eunjee; Grabow, Paul C.; Simmonds, Devon M.

The UML-based Specification Environment (USE) tool supports syntactic analysis, type checking, consistency checking, and dynamic validation of invariants and pre-/post conditions specified in the Object Constraint Language (OCL). Due to its animation and analysis power, it is useful when checking critical non-functional properties such as security policies. However, the USE tool requires one to specify (i.e., "write") a model using its own textual language and does not allow one to import any model specification files created by other UML modeling tools. Hence, to make the best use of existing UML tools, we often create a model with OCL constraints using a modeling tool such as the IBM Rational Software Architect (RSA) and then use the USE tool for model validation. This approach, however, requires a manual transformation between the specifications of two different tool formats, which is error-prone and diminishes the benefit of automated model-level validations. In this paper, we describe our own implementation of a specification transformation engine that is based on the Model Driven Architecture (MDA) framework and currently supports automatic tool-level transformations from RSA to USE.

Effects of dividing attention on memory for declarative and procedural aspects of tool use.

PubMed

Roy, Shumita; Park, Norman W

2016-07-01

Tool-related knowledge and skills are supported by a complex set of memory processes that are not well understood. Some aspects of tools are mediated by either declarative or procedural memory, while other aspects may rely on an interaction of both systems. Although motor skill learning is believed to be primarily supported by procedural memory, there is debate in the current literature regarding the role of declarative memory. Growing evidence suggests that declarative memory may be involved during early stages of motor skill learning, although findings have been mixed. In the current experiment, healthy, younger adults were trained to use a set of novel complex tools and were tested on their memory for various aspects of the tools. Declarative memory encoding was interrupted by dividing attention during training. Findings showed that dividing attention during training was detrimental for subsequent memory for tool attributes as well as accurate demonstration of tool use and tool grasping. However, dividing attention did not interfere with motor skill learning, suggesting that declarative memory is not essential for skill learning associated with tools.

A methodology and decision support tool for informing state-level bioenergy policymaking: New Jersey biofuels as a case study

NASA Astrophysics Data System (ADS)

Brennan-Tonetta, Margaret

This dissertation seeks to provide key information and a decision support tool that states can use to support long-term goals of fossil fuel displacement and greenhouse gas reductions. The research yields three outcomes: (1) A methodology that allows for a comprehensive and consistent inventory and assessment of bioenergy feedstocks in terms of type, quantity, and energy potential. Development of a standardized methodology for consistent inventorying of biomass resources fosters research and business development of promising technologies that are compatible with the state's biomass resource base. (2) A unique interactive decision support tool that allows for systematic bioenergy analysis and evaluation of policy alternatives through the generation of biomass inventory and energy potential data for a wide variety of feedstocks and applicable technologies, using New Jersey as a case study. Development of a database that can assess the major components of a bioenergy system in one tool allows for easy evaluation of technology, feedstock and policy options. The methodology and decision support tool is applicable to other states and regions (with location specific modifications), thus contributing to the achievement of state and federal goals of renewable energy utilization. (3) Development of policy recommendations based on the results of the decision support tool that will help to guide New Jersey into a sustainable renewable energy future. The database developed in this research represents the first ever assessment of bioenergy potential for New Jersey. It can serve as a foundation for future research and modifications that could increase its power as a more robust policy analysis tool. As such, the current database is not able to perform analysis of tradeoffs across broad policy objectives such as economic development vs. CO2 emissions, or energy independence vs. source reduction of solid waste. Instead, it operates one level below that with comparisons of kWh or GGE generated by different feedstock/technology combinations at the state and county level. Modification of the model to incorporate factors that will enable the analysis of broader energy policy issues as those mentioned above, are recommended for future research efforts.

The development of a supportive care needs assessment tool for Indigenous people with cancer

PubMed Central

2012-01-01

Background Little is known about the supportive care needs of Indigenous people with cancer and to date, existing needs assessment tools have not considered cultural issues for this population. We aimed to adapt an existing supportive care needs assessment tool for use with Indigenous Australians with cancer. Methods Face-to-face interviews with Indigenous cancer patients (n = 29) and five focus groups with Indigenous key-informants (n = 23) were conducted to assess the face and content validity, cultural acceptability, utility and relevance of the Supportive Care Needs Survey - Short Form 34 (SCNS-SF34) for use with Indigenous patients with cancer. Results All items from the SCNS-SF34 were shortened and changed to use more appropriate language (e.g. the word 'anxiety' was substituted with 'worry'). Seven questions were omitted (e.g. items on death and future considerations) as they were deemed culturally inappropriate or irrelevant and 12 items were added (e.g. accessible transport). Optional instructions were added before the sexual items. The design and response format of the SCNS-SF34 was modified to make it easier to use for Indigenous cancer patients. Given the extensive modifications to the SCNS-SF34 and the liklihood of a different factor structure we consider this tool to be a new tool rather than a modification. The Supportive care needs assessment tool for Indigenous people (SCNAT-IP) shows promising face and content validity and will be useful in informing services where they need to direct their attention for these patients. Conclusions Indigenous people with cancer have language, customs and specific needs that are not accommodated within the standard SCNS-SF34. Our SCNAT-IP improves acceptability, relevance and face validity for Indigenous-specific concerns. Our SCNAT-IP will allow screening for supportive care needs that are specific to Indigenous cancer patients' and greatly inform targeted policy development and practice. PMID:22817614

Maritime Spatial Planning supported by systematic site selection: Applying Marxan for offshore wind power in the western Baltic Sea

PubMed Central

Dahl, Karsten; Mohn, Christian

2018-01-01

The development of offshore wind energy and other competing interests in sea space are a major incentive for designating marine and coastal areas for specific human activities. Maritime Spatial Planning (MSP) considers human activities at sea in a more integrated way by analysing and designating spatial and temporal distributions of human activities based on ecological, economic and social targets. However, specific tools supporting spatial decisions at sea incorporating all relevant sectors are rarely adopted. The decision support tool Marxan is traditionally used for systematic selection and designation of nature protection and conservation areas. In this study, Marxan was applied as a support tool to identify suitable sites for offshore wind power in the pilot area Pomeranian Bight / Arkona Basin in the western Baltic Sea. The software was successfully tested and scenarios were developed that support the sites indicated in existing national plans, but also show options for alternative developments of offshore wind power in the Pomeranian Bight / Arkona Basin area. PMID:29543878

Developing an Interactive Data Visualization Tool to Assess the Impact of Decision Support on Clinical Operations.

PubMed

Huber, Timothy C; Krishnaraj, Arun; Monaghan, Dayna; Gaskin, Cree M

2018-05-18

Due to mandates from recent legislation, clinical decision support (CDS) software is being adopted by radiology practices across the country. This software provides imaging study decision support for referring providers at the point of order entry. CDS systems produce a large volume of data, providing opportunities for research and quality improvement. In order to better visualize and analyze trends in this data, an interactive data visualization dashboard was created using a commercially available data visualization platform. Following the integration of a commercially available clinical decision support product into the electronic health record, a dashboard was created using a commercially available data visualization platform (Tableau, Seattle, WA). Data generated by the CDS were exported from the data warehouse, where they were stored, into the platform. This allowed for real-time visualization of the data generated by the decision support software. The creation of the dashboard allowed the output from the CDS platform to be more easily analyzed and facilitated hypothesis generation. Integrating data visualization tools into clinical decision support tools allows for easier data analysis and can streamline research and quality improvement efforts.

BASINS and WEPP Climate Assessment Tools (CAT): Case Study Guide to Potential Applications (External Review Draft)

EPA Science Inventory

This draft report supports application of two recently developed water modeling tools, the BASINS and WEPP climate assessment tools. The report presents a series of short case studies designed to illustrate the capabilities of these tools for conducting scenario based assessments...

Design of a Cognitive Tool to Enhance Problemsolving Performance

ERIC Educational Resources Information Center

Lee, Youngmin; Nelson, David

2005-01-01

The design of a cognitive tool to support problem-solving performance for external representation of knowledge is described. The limitations of conventional knowledge maps are analyzed in proposing the tool. The design principles and specifications are described. This tool is expected to enhance learners problem-solving performance by allowing…

SMOKE TOOL FOR MODELS-3 VERSION 4.1 STRUCTURE AND OPERATION DOCUMENTATION

EPA Science Inventory

The SMOKE Tool is a part of the Models-3 system, a flexible software system designed to simplify the development and use of air quality models and other environmental decision support tools. The SMOKE Tool is an input processor for SMOKE, (Sparse Matrix Operator Kernel Emissio...

A Data-Driven Framework for Incorporating New Tools for ...

EPA Pesticide Factsheets

This talk was given during the “Exposure-Based Toxicity Testing” session at the annual meeting of the International Society for Exposure Science. It provided an update on the state of the science and tools that may be employed in risk-based prioritization efforts. It outlined knowledge gained from the data provided using these high-throughput tools to assess chemical bioactivity and to predict chemical exposures and also identified future needs. It provided an opportunity to showcase ongoing research efforts within the National Exposure Research Laboratory and the National Center for Computational Toxicology within the Office of Research and Development to an international audience. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

Support for Systematic Code Reviews with the SCRUB Tool

NASA Technical Reports Server (NTRS)

Holzmann, Gerald J.

2010-01-01

SCRUB is a code review tool that supports both large, team-based software development efforts (e.g., for mission software) as well as individual tasks. The tool was developed at JPL to support a new, streamlined code review process that combines human-generated review reports with program-generated review reports from a customizable range of state-of-the-art source code analyzers. The leading commercial tools include Codesonar, Coverity, and Klocwork, each of which can achieve a reasonably low rate of false-positives in the warnings that they generate. The time required to analyze code with these tools can vary greatly. In each case, however, the tools produce results that would be difficult to realize with human code inspections alone. There is little overlap in the results produced by the different analyzers, and each analyzer used generally increases the effectiveness of the overall effort. The SCRUB tool allows all reports to be accessed through a single, uniform interface (see figure) that facilitates brows ing code and reports. Improvements over existing software include significant simplification, and leveraging of a range of commercial, static source code analyzers in a single, uniform framework. The tool runs as a small stand-alone application, avoiding the security problems related to tools based on Web browsers. A developer or reviewer, for instance, must have already obtained access rights to a code base before that code can be browsed and reviewed with the SCRUB tool. The tool cannot open any files or folders to which the user does not already have access. This means that the tool does not need to enforce or administer any additional security policies. The analysis results presented through the SCRUB tool s user interface are always computed off-line, given that, especially for larger projects, this computation can take longer than appropriate for interactive tool use. The recommended code review process that is supported by the SCRUB tool consists of three phases: Code Review, Developer Response, and Closeout Resolution. In the Code Review phase, all tool-based analysis reports are generated, and specific comments from expert code reviewers are entered into the SCRUB tool. In the second phase, Developer Response, the developer is asked to respond to each comment and tool-report that was produced, either agreeing or disagreeing to provide a fix that addresses the issue that was raised. In the third phase, Closeout Resolution, all disagreements are discussed in a meeting of all parties involved, and a resolution is made for all disagreements. The first two phases generally take one week each, and the third phase is concluded in a single closeout meeting.

The effective integration of analysis, modeling, and simulation tools.

DOT National Transportation Integrated Search

2013-08-01

The need for model integration arises from the recognition that both transportation decisionmaking and the tools supporting it continue to increase in complexity. Many strategies that agencies evaluate require using tools that are sensitive to supply...

Tribal-Focused Environmental Risk and Sustainability Tool (Tribal-FERST) Fact Sheet

EPA Pesticide Factsheets

The Tribal-Focused Environmental Risk and Sustainability Tool (Tribal- FERST) is a web-based geospatial decision support tool that will provide tribes with easy access to the best available human health and ecological science.

GET SMARTE: DECISION TOOLS TO REVITALIZE BROWNFIELDS

EPA Science Inventory

SMARTe (Sustainable Management Approaches and Revitalization Tools-electronic) is an open-source, web-based, decision-support system for developing and evaluating future use scenarios for potentially contaminated sites (i.e., brownfields). It contains resources and analysis tools...

Fault Tree Analysis Application for Safety and Reliability

NASA Technical Reports Server (NTRS)

Wallace, Dolores R.

2003-01-01

Many commercial software tools exist for fault tree analysis (FTA), an accepted method for mitigating risk in systems. The method embedded in the tools identifies a root as use in system components, but when software is identified as a root cause, it does not build trees into the software component. No commercial software tools have been built specifically for development and analysis of software fault trees. Research indicates that the methods of FTA could be applied to software, but the method is not practical without automated tool support. With appropriate automated tool support, software fault tree analysis (SFTA) may be a practical technique for identifying the underlying cause of software faults that may lead to critical system failures. We strive to demonstrate that existing commercial tools for FTA can be adapted for use with SFTA, and that applied to a safety-critical system, SFTA can be used to identify serious potential problems long before integrator and system testing.

Mathematical support for automated geometry analysis of lathe machining of oblique peakless round-nose tools

NASA Astrophysics Data System (ADS)

Filippov, A. V.; Tarasov, S. Yu; Podgornyh, O. A.; Shamarin, N. N.; Filippova, E. O.

2017-01-01

Automatization of engineering processes requires developing relevant mathematical support and a computer software. Analysis of metal cutting kinematics and tool geometry is a necessary key task at the preproduction stage. This paper is focused on developing a procedure for determining the geometry of oblique peakless round-nose tool lathe machining with the use of vector/matrix transformations. Such an approach allows integration into modern mathematical software packages in distinction to the traditional analytic description. Such an advantage is very promising for developing automated control of the preproduction process. A kinematic criterion for the applicable tool geometry has been developed from the results of this study. The effect of tool blade inclination and curvature on the geometry-dependent process parameters was evaluated.

Incorporating INTERACT II Clinical Decision Support Tools into Nursing Home Health Information Technology

PubMed Central

Handler, Steven M.; Sharkey, Siobhan S.; Hudak, Sandra; Ouslander, Joseph G.

2012-01-01

A substantial reduction in hospitalization rates has been associated with the implementation of the Interventions to Reduce Acute Care Transfers (INTERACT) quality improvement intervention using the accompanying paper-based clinical practice tools (INTERACT II). There is significant potential to further increase the impact of INTERACT by integrating INTERACT II tools into nursing home (NH) health information technology (HIT) via standalone or integrated clinical decision support (CDS) systems. This article highlights the process of translating INTERACT II tools from paper to NH HIT. The authors believe that widespread dissemination and integration of INTERACT II CDS tools into various NH HIT products could lead to sustainable improvement in resident and clinician process and outcome measures, including enhanced interclinician communication and a reduction in potentially avoidable hospitalizations. PMID:22267955

Quasi-experimental study designs series-paper 11: supporting the production and use of health systems research syntheses that draw on quasi-experimental study designs.

PubMed

Lavis, John N; Bärnighausen, Till; El-Jardali, Fadi

2017-09-01

To describe the infrastructure available to support the production of policy-relevant health systems research syntheses, particularly those incorporating quasi-experimental evidence, and the tools available to support the use of these syntheses. Literature review. The general challenges associated with the available infrastructure include their sporadic nature or limited coverage of issues and countries, whereas the specific ones related to policy-relevant syntheses of quasi-experimental evidence include the lack of mechanism to register synthesis titles and scoping review protocols, the limited number of groups preparing user-friendly summaries, and the difficulty of finding quasi-experimental studies for inclusion in rapid syntheses and research syntheses more generally. Although some new tools have emerged in recent years, such as guidance workbooks and citizen briefs and panels, challenges related to using available tools to support the use of policy-relevant syntheses of quasi-experimental evidence arise from such studies potentially being harder for policymakers and stakeholders to commission and understand. Policymakers, stakeholders, and researchers need to expand the coverage and institutionalize the use of the available infrastructure and tools to support the use of health system research syntheses containing quasi-experimental evidence. Copyright © 2017 Elsevier Inc. All rights reserved.

EVA-Compatible Microbial Swab Tool

NASA Technical Reports Server (NTRS)

Rucker, Michelle A.

2016-01-01

When we send humans to search for life on Mars, we'll need to know what we brought with us versus what may already be there. To ensure our crewed spacecraft meet planetary protection requirements—and to protect our science from human contamination—we'll need to know whether micro-organisms are leaking/venting from our ships and spacesuits. This is easily done by swabbing external vents and suit surfaces for analysis, but requires a specialized tool for the job. Engineers at the National Aeronautics and Space Administration (NASA) recently developed an Extravehicular Activity (EVA)-compatible swab tool that can be used to sample current space suits and life support systems. Data collected now will influence Mars life support and EVA hardware early in the planning process, before design changes become difficult and expensive.NASA’s EVA swab tool pairs a Space Shuttle-era tool handle with a commercially available swab tip mounted into a custom-designed end effector. A glove-compatible release mechanism allows the handle to quickly switch between swab tips, much like a shaving razor handle can snap onto a disposable blade cartridge. Swab tips are stowed inside individual sterile containers, each fitted with a microbial filter that allows the container to equalize atmospheric pressure, but prevents cabin contaminants from rushing into the container when passing from the EVA environment into a pressurized cabin. A bank of containers arrayed inside a tool caddy allows up to six individual samples to be collected during a given spacewalk.NASA plans to use the tool in 2016 to collect samples from various spacesuits during ground testing to determine what (if any) human-borne microbial contamination leaks from the suit under simulated thermal vacuum conditions. Next, the tool will be used on board the International Space Station to assess the types of microbial contaminants found on external environmental control and life support system vents. Data will support advanced EVA and life support system maturation studies, helping to answer questions such as “how close can an EVA-suited crew member approach an area of scientific interest without compromising the science?”

The development of an online decision support tool for organizational readiness for change.

PubMed

Khan, Sobia; Timmings, Caitlyn; Moore, Julia E; Marquez, Christine; Pyka, Kasha; Gheihman, Galina; Straus, Sharon E

2014-05-10

Much importance has been placed on assessing readiness for change as one of the earliest steps of implementation, but measuring it can be a complex and daunting task. Organizations and individuals struggle with how to reliably and accurately measure readiness for change. Several measures have been developed to help organizations assess readiness, but these are often underused due to the difficulty of selecting the right measure. In response to this challenge, we will develop and test a prototype of a decision support tool that is designed to guide individuals interested in implementation in the selection of an appropriate readiness assessment measure for their setting. A multi-phase approach will be used to develop the decision support tool. First, we will identify key measures for assessing organizational readiness for change from a recently completed systematic review. Included measures will be those developed for healthcare settings (e.g., acute care, public health, mental health) and that have been deemed valid and reliable. Second, study investigators and field experts will engage in a mapping exercise to categorize individual items of included measures according to key readiness constructs from an existing framework. Third, a stakeholder panel will be recruited and consulted to determine the feasibility and relevance of the selected measures using a modified Delphi process. Fourth, findings from the mapping exercise and stakeholder consultation will inform the development of a decision support tool that will guide users in appropriately selecting change readiness measures. Fifth, the tool will undergo usability testing. Our proposed decision support tool will address current challenges in the field of organizational change readiness by aiding individuals in selecting a valid and reliable assessment measure that is relevant to user needs and practice settings. We anticipate that implementers and researchers who use our tool will be more likely to conduct readiness for change assessments in their settings when planning for implementation. This, in turn, may contribute to more successful implementation outcomes. We will test this tool in a future study to determine its efficacy and impact on implementation processes.

Visionmaker.NYC: An Online Landscape Ecology Tool to Support Social-Ecological System Visioning and Planning

ERIC Educational Resources Information Center

DuBois, Bryce; Allred, Shorna; Bunting-Howarth, Katherine; Sanderson, Eric W.; Giampieri, Mario

2017-01-01

The Welikeia project and the corresponding free online tool Visionmaker. NYC focus on the historical landscape ecologies of New York City. This article provides a brief introduction to online participatory tools, describes the Visionmaker tool in detail, and offers suggested ways to use the tool for Extension professionals based in and outside New…

Decision Support Systems for Research and Management in Advanced Life Support

NASA Technical Reports Server (NTRS)

Rodriquez, Luis F.

2004-01-01

Decision support systems have been implemented in many applications including strategic planning for battlefield scenarios, corporate decision making for business planning, production planning and control systems, and recommendation generators like those on Amazon.com(Registered TradeMark). Such tools are reviewed for developing a similar tool for NASA's ALS Program. DSS are considered concurrently with the development of the OPIS system, a database designed for chronicling of research and development in ALS. By utilizing the OPIS database, it is anticipated that decision support can be provided to increase the quality of decisions by ALS managers and researchers.

Toward an evidence-based system for innovation support for implementing innovations with quality: tools, training, technical assistance, and quality assurance/quality improvement.

PubMed

Wandersman, Abraham; Chien, Victoria H; Katz, Jason

2012-12-01

An individual or organization that sets out to implement an innovation (e.g., a new technology, program, or policy) generally requires support. In the Interactive Systems Framework for Dissemination and Implementation, a Support System should work with Delivery Systems (national, state and/or local entities such as health and human service organizations, community-based organizations, schools) to enhance their capacity for quality implementation of innovations. The literature on the Support System [corrected] has been underresearched and under-developedThis article begins to conceptualize theory, research, and action for an evidence-based system for innovation support (EBSIS). EBSIS describes key priorities for strengthening the science and practice of support. The major goal of EBSIS is to enhance the research and practice of support in order to build capacity in the Delivery System for implementing innovations with quality, and thereby, help the Delivery System achieve outcomes. EBSIS is guided by a logic model that includes four key support components: tools, training, technical assistance, and quality assurance/quality improvement. EBSIS uses the Getting To Outcomes approach to accountability to aid the identification and synthesis of concepts, tools, and evidence for support. We conclude with some discussion of the current status of EBSIS and possible next steps, including the development of collaborative researcher-practitioner-funder-consumer partnerships to accelerate accumulation of knowledge on the Support System.

Lifelong Learning Organisers: Requirements for Tools for Supporting Episodic and Semantic Learning

ERIC Educational Resources Information Center

Vavoula, Giasemi; Sharples, Mike

2009-01-01

We propose Lifelong Learning Organisers (LLOs) as tools to support the capturing, organisation and retrieval of personal learning experiences, resources and notes, over a range of learning topics, at different times and places. The paper discusses general requirements for the design of LLOs based on findings from a diary-based study of everyday…

HUMAN HEALTH METRICS FOR ENVIRONMENTAL DECISION SUPPORT TOOLS: LESSONS FROM HEALTH ECONOMICS AND DECISION ANALYSIS: JOURNAL ARTICLE

EPA Science Inventory

NRMRL-CIN-1351 Hofstetter**, P., and Hammitt, J. K. Human Health Metrics for Environmental Decision Support Tools: Lessons from Health Economics and Decision Analysis. Risk Analysis 600/R/01/104, Available: on internet, www.epa.gov/ORD/NRMRL/Pubs/600R01104, [NET]. 03/07/2001 D...

Multi-Sector Sustainability Browser (MSSB) User Manual: A Decision Support Tool (DST) for Supporting Sustainability Efforts in Four Areas - Land Use, Transportation, Buildings and Infrastructure, and Materials Management

EPA Science Inventory

EPA’s Sustainable and Healthy Communities (SHC) Research Program is developing methodologies, resources, and tools to assist community members and local decision makers in implementing policy choices that facilitate sustainable approaches in managing their resources affecti...

District Self-Assessment Tool: For Modification of Collective Bargaining Agreements to Achieve Flexible Conditions for School Turnaround

ERIC Educational Resources Information Center

Mass Insight Education (NJ1), 2011

2011-01-01

The District Self-Assessment Tool is designed to support districts, unions and Lead Partners, when analyzing their existing collective bargaining agreement (CBA) with the intention of making targeted modifications to support the implementation of dramatic reform in the district's lowest-performing schools. By outlining objectives and suggested…

Getting Students Excited about Learning: Incorporating Digital Tools to Support the Writing Process

ERIC Educational Resources Information Center

Saulsburry, Rachel; Kilpatrick, Jennifer Renée; Wolbers, Kimberly A.; Dostal, Hannah

2015-01-01

Technology--in the form of digital tools incorporated into writing instruction--can help teachers motivate and engage young children, and it may be especially critical for students who do everything they can to avoid writing. Technology may bolster student involvement, foster the engagement of reluctant or struggling writers, and support writing…

Technological Support for Assignment Assessment: A New Zealand Higher Education Survey

ERIC Educational Resources Information Center

Milne, John; Heinrich, Eva; Morrison, David

2008-01-01

This article presents selected aspects of a large study on the use of e-learning tools in support of assignment assessment, which was comprised of a substantial literature review, an investigation into electronic tools, and interviews with 90 academics at New Zealand tertiary institutions. The article makes two main contributions. Based on the…

Examining Students' Use of Online Annotation Tools in Support of Argumentative Reading

ERIC Educational Resources Information Center

Lu, Jingyan; Deng, Liping

2013-01-01

This study examined how students in a Hong Kong high school used Diigo, an online annotation tool, to support their argumentative reading activities. Two year 10 classes, a high-performance class (HPC) and an ordinary-performance class (OPC), highlighted passages of text and wrote and attached sticky notes to them to clarify argumentation…

Effectiveness of Demonstrations Supported by ICT Tools on Upper Secondary School Students' Attitudes towards the Learning of Physics

ERIC Educational Resources Information Center

Yap, Boon Chien; Chew, Charles

2014-01-01

This quantitative research study reports the effectiveness of demonstrations supported by appropriate information and communication technology (ICT) tools such as dataloggers, animations and video clips on upper secondary school students' attitudes towards the learning of physics. A sample of 94 secondary four express stream (age 16 years) and…

An Ambient Awareness Tool for Supporting Supervised Collaborative Problem Solving

ERIC Educational Resources Information Center

Alavi, H. S.; Dillenbourg, P.

2012-01-01

We describe an ambient awareness tool, named "Lantern", designed for supporting the learning process in recitation sections, (i.e., when students work in small teams on the exercise sets with the help of tutors). Each team is provided with an interactive lamp that displays their work status: the exercise they are working on, if they have…

Research flight software engineering and MUST, an integrated system of support tools

NASA Technical Reports Server (NTRS)

Straeter, T. A.; Foudriat, E. C.; Will, R. W.

1977-01-01

Consideration is given to software development to support NASA flight research. The Multipurpose User-Oriented Software Technology (MUST) program, designed to integrate digital systems into flight research, is discussed. Particular attention is given to the program's special interactive user interface, subroutine library, assemblers, compiler, automatic documentation tools, and test and simulation subsystems.

An Engineering Educator's Decision Support Tool for Improving Innovation in Student Design Projects

ERIC Educational Resources Information Center

Ozaltin, Nur Ozge; Besterfield-Sacre, Mary; Clark, Renee M.

2015-01-01

Learning how to design innovatively is a critical process skill for undergraduate engineers in the 21st century. To this end, our paper discusses the development and validation of a Bayesian network decision support tool that can be used by engineering educators to make recommendations that positively impact the innovativeness of product designs.…

Pheromone-based decision support tools for management of Halyomorpha halys in apple orchards: development of a trap-based treatment threshold

USDA-ARS?s Scientific Manuscript database

The invasive brown marmorated stink bug, Halyomorpha halys (Stål), has become a serious pest in mid-Atlantic apple orchards. Because no decision support tools exist for H. halys management, calendar-based insecticide applications have been the only successful technique for mitigating H. halys injur...

Interaction between Tool and Talk: How Instruction and Tools Support Consensus Building in Collaborative Inquiry-Learning Environments

ERIC Educational Resources Information Center

Gijlers, H.; Saab, N.; Van Joolingen, W. R.; De Jong, T.; Van Hout-Wolters, B. H. A. M.

2009-01-01

The process of collaborative inquiry learning requires maintaining a mutual understanding of the task, along with reaching consensus on strategies, plans and domain knowledge. In this study, we explore how different supportive measures affect students' consensus-building process, based on a re-analysis of data from four studies. We distinguish…

The Infant Feeding Genogram: a tool for exploring family infant feeding history and identifying support needs.

PubMed

Darwent, K L; McInnes, R J; Swanson, V

2016-10-19

Family culture and beliefs are passed through the generations within families and influence what constitutes appropriate infant care. This includes infant feeding decisions where a family history and support network congruent with women's infant feeding intentions has been shown to be important to women's breastfeeding experience. This is reflected in breastfeeding rates where women who were not breastfed themselves are less likely to initiate and continue with breastfeeding. Given the importance of family infant feeding history in the initiation and duration of breastfeeding, and the limited ability of some families to provide support; it is unclear why infant feeding family history and support networks are not explored during pregnancy. The Infant Feeding Genogram was adapted from a simple pictorial device that is widely used in psychotherapy and genetic counselling. This tool was developed as part of a study investigating the experience of women when they were the first to breastfeed in their family. Fourteen Scottish participants completed their Infant Feeding Genogram as part of a semi-structured interview. The tool was adapted alongside their narratives to give a visual representation of each participant's family infant feeding history. The utility of the genogram is illustrated through two contrasting case examples with very different family feeding histories. The genogram showed family structures, patterns of infant feeding over time, and supportive or conflicting relationships. In the research setting it assisted women to explore their infant feeding history, identify challenges and sources of support and build rapport with the interviewer. The infant feeding genogram is proposed as a time efficient tool that could assist health professionals and other breastfeeding workers to support women and their families and by stimulating discussion around breastfeeding, Bby identifying strengths or possible deficits in social support for each individual, the tool could inform tailored support and care interventions. The effectiveness and acceptability of the Infant Feeding Genogram requires testing in the clinical environment. However, its successful application in other clinical contexts, combined with the interest in genealogy in popular culture, mean this is likely to be an acceptable, family friendly way to develop more effective breastfeeding conversations.

WetDATA Hub: Democratizing Access to Water Data to Accelerate Innovation through Data Visualization, Predictive Analytics and Artificial Intelligence Applications

NASA Astrophysics Data System (ADS)

Sarni, W.

2017-12-01

Water scarcity and poor quality impacts economic development, business growth, and social well-being. Water has become, in our generation, the foremost critical local, regional, and global issue of our time. Despite these needs, there is no water hub or water technology accelerator solely dedicated to water data and tools. There is a need by the public and private sectors for vastly improved data management and visualization tools. This is the WetDATA opportunity - to develop a water data tech hub dedicated to water data acquisition, analytics, and visualization tools for informed policy and business decisions. WetDATA's tools will help incubate disruptive water data technologies and accelerate adoption of current water data solutions. WetDATA is a Colorado-based (501c3), global hub for water data analytics and technology innovation. WetDATA's vision is to be a global leader in water information, data technology innovation and collaborate with other US and global water technology hubs. ROADMAP * Portal (www.wetdata.org) to provide stakeholders with tools/resources to understand related water risks. * The initial activities will provide education, awareness and tools to stakeholders to support the implementation of the Colorado State Water Plan. * Leverage the Western States Water Council Water Data Exchange database. * Development of visualization, predictive analytics and AI tools to engage with stakeholders and provide actionable data and information. TOOLS Education: Provide information on water issues and risks at the local, state, national and global scale. Visualizations: Development of data analytics and visualization tools based upon the 2030 Water Resources Group methodology to support the implementation of the Colorado State Water Plan. Predictive Analytics: Accessing publically available water databases and using machine learning to develop water availability forecasting tools, and time lapse images to support city / urban planning.

GET SMARTE: DECISION TOOLS TO REVITALIZE COMMUNITIES (MAY 2006)

EPA Science Inventory

SMARTe (Sustainable Management Approaches and Revitalization Tools-electronic) is an open-source, web-based, decision-support system for developing and evaluating future use scenarios for potentially contaminated sites (i.e., brownfields). It contains resources and analysis tools...

Fermilab Friends for Science Education | Board Tools

Science.gov Websites

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Board Tools Testimonials Our Donors Board of Directors Board Tools Calendar Join Us Donate Now Get FermiGear! Education

The impact of computer self-efficacy, computer anxiety, and perceived usability and acceptability on the efficacy of a decision support tool for colorectal cancer screening

PubMed Central

Lindblom, Katrina; Gregory, Tess; Flight, Ingrid H K; Zajac, Ian

2011-01-01

Objective This study investigated the efficacy of an internet-based personalized decision support (PDS) tool designed to aid in the decision to screen for colorectal cancer (CRC) using a fecal occult blood test. We tested whether the efficacy of the tool in influencing attitudes to screening was mediated by perceived usability and acceptability, and considered the role of computer self-efficacy and computer anxiety in these relationships. Methods Eighty-one participants aged 50–76 years worked through the on-line PDS tool and completed questionnaires on computer self-efficacy, computer anxiety, attitudes to and beliefs about CRC screening before and after exposure to the PDS, and perceived usability and acceptability of the tool. Results Repeated measures ANOVA found that PDS exposure led to a significant increase in knowledge about CRC and screening, and more positive attitudes to CRC screening as measured by factors from the Preventive Health Model. Perceived usability and acceptability of the PDS mediated changes in attitudes toward CRC screening (but not CRC knowledge), and computer self-efficacy and computer anxiety were significant predictors of individuals' perceptions of the tool. Conclusion Interventions designed to decrease computer anxiety, such as computer courses and internet training, may improve the acceptability of new health information technologies including internet-based decision support tools, increasing their impact on behavior change. PMID:21857024

Development of a self-assessment teamwork tool for use by medical and nursing students.

PubMed

Gordon, Christopher J; Jorm, Christine; Shulruf, Boaz; Weller, Jennifer; Currie, Jane; Lim, Renee; Osomanski, Adam

2016-08-24

Teamwork training is an essential component of health professional student education. A valid and reliable teamwork self-assessment tool could assist students to identify desirable teamwork behaviours with the potential to promote learning about effective teamwork. The aim of this study was to develop and evaluate a self-assessment teamwork tool for health professional students for use in the context of emergency response to a mass casualty. The authors modified a previously published teamwork instrument designed for experienced critical care teams for use with medical and nursing students involved in mass casualty simulations. The 17-item questionnaire was administered to students immediately following the simulations. These scores were used to explore the psychometric properties of the tool, using Exploratory and Confirmatory Factor Analysis. 202 (128 medical and 74 nursing) students completed the self-assessment teamwork tool for students. Exploratory factor analysis revealed 2 factors (5 items - Teamwork coordination and communication; 4 items - Information sharing and support) and these were justified with confirmatory factor analysis. Internal consistency was 0.823 for Teamwork coordination and communication, and 0.812 for Information sharing and support. These data provide evidence to support the validity and reliability of the self-assessment teamwork tool for students This self-assessment tool could be of value to health professional students following team training activities to help them identify the attributes of effective teamwork.

compomics-utilities: an open-source Java library for computational proteomics.

PubMed

Barsnes, Harald; Vaudel, Marc; Colaert, Niklaas; Helsens, Kenny; Sickmann, Albert; Berven, Frode S; Martens, Lennart

2011-03-08

The growing interest in the field of proteomics has increased the demand for software tools and applications that process and analyze the resulting data. And even though the purpose of these tools can vary significantly, they usually share a basic set of features, including the handling of protein and peptide sequences, the visualization of (and interaction with) spectra and chromatograms, and the parsing of results from various proteomics search engines. Developers typically spend considerable time and effort implementing these support structures, which detracts from working on the novel aspects of their tool. In order to simplify the development of proteomics tools, we have implemented an open-source support library for computational proteomics, called compomics-utilities. The library contains a broad set of features required for reading, parsing, and analyzing proteomics data. compomics-utilities is already used by a long list of existing software, ensuring library stability and continued support and development. As a user-friendly, well-documented and open-source library, compomics-utilities greatly simplifies the implementation of the basic features needed in most proteomics tools. Implemented in 100% Java, compomics-utilities is fully portable across platforms and architectures. Our library thus allows the developers to focus on the novel aspects of their tools, rather than on the basic functions, which can contribute substantially to faster development, and better tools for proteomics.

Problem-Solving Environments (PSEs) to Support Innovation Clustering

NASA Technical Reports Server (NTRS)

Gill, Zann

1999-01-01

This paper argues that there is need for high level concepts to inform the development of Problem-Solving Environment (PSE) capability. A traditional approach to PSE implementation is to: (1) assemble a collection of tools; (2) integrate the tools; and (3) assume that collaborative work begins after the PSE is assembled. I argue for the need to start from the opposite premise, that promoting human collaboration and observing that process comes first, followed by the development of supporting tools, and finally evolution of PSE capability through input from collaborating project teams.

One approach for evaluating the Distributed Computing Design System (DCDS)

NASA Technical Reports Server (NTRS)

Ellis, J. T.

1985-01-01

The Distributed Computer Design System (DCDS) provides an integrated environment to support the life cycle of developing real-time distributed computing systems. The primary focus of DCDS is to significantly increase system reliability and software development productivity, and to minimize schedule and cost risk. DCDS consists of integrated methodologies, languages, and tools to support the life cycle of developing distributed software and systems. Smooth and well-defined transistions from phase to phase, language to language, and tool to tool provide a unique and unified environment. An approach to evaluating DCDS highlights its benefits.

DooSo6: Easy Collaboration over Shared Projects

NASA Astrophysics Data System (ADS)

Ignat, Claudia-Lavinia; Oster, Gérald; Molli, Pascal

Existing tools for supporting parallel work feature some disadvantages that prevent them to be widely used. Very often they require a complex installation and creation of accounts for all group members. Users need to learn and deal with complex commands for efficiently using these collaborative tools. Some tools require users to abandon their favourite editors and impose them to use a certain co-authorship application. In this paper, we propose the DooSo6 collaboration tool that offers support for parallel work, requires no installation, no creation of accounts and that is easy to use, users being able to continue working with their favourite editors. User authentication is achieved by means of a capability-based mechanism.

Adapting HIV patient and program monitoring tools for chronic non-communicable diseases in Ethiopia.

PubMed

Letebo, Mekitew; Shiferaw, Fassil

2016-06-02

Chronic non-communicable diseases (NCDs) have become a huge public health concern in developing countries. Many resource-poor countries facing this growing epidemic, however, lack systems for an organized and comprehensive response to NCDs. Lack of NCD national policy, strategies, treatment guidelines and surveillance and monitoring systems are features of health systems in many developing countries. Successfully responding to the problem requires a number of actions by the countries, including developing context-appropriate chronic care models and programs and standardization of patient and program monitoring tools. In this cross-sectional qualitative study we assessed existing monitoring and evaluation (M&E) tools used for NCD services in Ethiopia. Since HIV care and treatment program is the only large-scale chronic care program in the country, we explored the M&E tools being used in the program and analyzed how these tools might be adapted to support NCD services in the country. Document review and in-depth interviews were the main data collection methods used. The interviews were held with health workers and staff involved in data management purposively selected from four health facilities with high HIV and NCD patient load. Thematic analysis was employed to make sense of the data. Our findings indicate the apparent lack of information systems for NCD services, including the absence of standardized patient and program monitoring tools to support the services. We identified several HIV care and treatment patient and program monitoring tools currently being used to facilitate intake process, enrolment, follow up, cohort monitoring, appointment keeping, analysis and reporting. Analysis of how each tool being used for HIV patient and program monitoring can be adapted for supporting NCD services is presented. Given the similarity between HIV care and treatment and NCD services and the huge investment already made to implement standardized tools for HIV care and treatment program, adaptation and use of HIV patient and program monitoring tools for NCD services can improve NCD response in Ethiopia through structuring services, standardizing patient care and treatment, supporting evidence-based planning and providing information on effectiveness of interventions.

Supporting Beginning Teacher Planning and Enactment of Investigation-based Science Discussions: The Design and Use of Tools within Practice-based Teacher Education

NASA Astrophysics Data System (ADS)

Kademian, Sylvie M.

Current reform efforts prioritize science instruction that provides opportunities for students to engage in productive talk about scientific phenomena. Given the challenges teachers face enacting instruction that integrates science practices and science content, beginning teachers need support to develop the knowledge and teaching practices required to teach reform-oriented science lessons. Practice-based teacher education shows potential for supporting beginning teachers while they are learning to teach in this way. However, little is known about how beginning elementary teachers draw upon the types of support and tools associated with practice-based teacher education to learn to successfully enact this type of instruction. This dissertation addresses this gap by investigating how a practice-based science methods course using a suite of teacher educator-provided tools can support beginning teachers' planning and enactment of investigation-based science lessons. Using qualitative case study methodologies, this study drew on video-records, lesson plans, class assignments, and surveys from one cohort of 22 pre-service teachers (called interns in this study) enrolled in a year-long elementary education master of the arts and teaching certification program. Six focal interns were also interviewed at multiple time-points during the methods course. Similarities existed across the types of tools and teaching practices interns used most frequently to plan and enact investigation-based discussions. For the focal interns, use of four synergistic teaching practices throughout the lesson enactments (including consideration of students' initial ideas; use of open-ended questions to elicit, extend, and challenge ideas; connecting across students' ideas and the disciplinary core ideas; and use of a representation to organize and highlight students' ideas) appeared to lead to increased opportunities for students to share their ideas and engage in data analysis, argumentation and explanation construction. Student opportunities to engage in practices that prioritize scientific discourse also occurred when interns were using dialogic voice and the tools designed to foster development of teacher knowledge for facilitating investigation-based science discussions. However, several intern characteristics likely moderated or mediated intern use of tools, dialogic voice, and productive teaching practices to capitalize on student contributions. These characteristics included intern knowledge of the science content and practices and initial beliefs about science teaching. Missed opportunities to use a combination of several teaching practices and tools designed to foster the development of knowledge for science teaching resulted in fewer opportunities for students to engage in data analysis, argumentation based on evidence, and construction of scientific explanations. These findings highlight the potential of teacher-educator provided tools for supporting beginning teachers in learning to facilitate investigation-based discussions that capitalize on student contributions. These findings also help the field conceptualize how beginning teachers use tools and teaching practices to plan and enact investigation-based science lessons, and how intern characteristics relate to tool use and planned and enacted lessons. By analyzing the investigation-based science lessons holistically, this study begins to unpack the complexities of facilitating investigation-based discussions including the interplay between intern characteristics and tool use, and the ways intern engagement in synergistic teaching practices provide opportunities for students to engage in data analysis, explanation construction, and argumentation. This study also describes methodological implications for this type of whole-lesson analysis and comments on the need for further research investigating beginning teachers' use of tools over time. Finally, I propose the need for iterative design of scaffolds to further support beginning teacher facilitation of investigation-based science lessons.

Regulation of Tool-Use within a Blended Course: Student Differences and Performance Effects

ERIC Educational Resources Information Center

Lust, Griet; Elen, Jan; Clarebout, Geraldine

2013-01-01

Given the rising popularity of content management systems (CMSs) in higher education, the current study investigates how students use tools in CMS supported courses. More specifically, the current study investigates how students regulate their tool-use throughout the course period by considering the moment tools are used. This temporal dimension…

Writing a Dissertation: Tools for Success

ERIC Educational Resources Information Center

Montgomery, Anne E.

2017-01-01

Plenty of material exists to help with the writing process, but sometimes the writer needs tools to help organize the process. This paper reviews some of the tools needed to organize articles and other references. A discussion of keywords, note taking, and document organization provides examples on the choice use of technology tools to support the…

Yucca Mountain licensing support network archive assistant.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunlavy, Daniel M.; Bauer, Travis L.; Verzi, Stephen J.

2008-03-01

This report describes the Licensing Support Network (LSN) Assistant--a set of tools for categorizing e-mail messages and documents, and investigating and correcting existing archives of categorized e-mail messages and documents. The two main tools in the LSN Assistant are the LSN Archive Assistant (LSNAA) tool for recategorizing manually labeled e-mail messages and documents and the LSN Realtime Assistant (LSNRA) tool for categorizing new e-mail messages and documents. This report focuses on the LSNAA tool. There are two main components of the LSNAA tool. The first is the Sandia Categorization Framework, which is responsible for providing categorizations for documents in anmore » archive and storing them in an appropriate Categorization Database. The second is the actual user interface, which primarily interacts with the Categorization Database, providing a way for finding and correcting categorizations errors in the database. A procedure for applying the LSNAA tool and an example use case of the LSNAA tool applied to a set of e-mail messages are provided. Performance results of the categorization model designed for this example use case are presented.« less

The need for psycho-oncological support for melanoma patients: Central role of patients' self-evaluation.

PubMed

Mayer, Simone; Teufel, Martin; Schaeffeler, Norbert; Keim, Ulrike; Garbe, Claus; Eigentler, Thomas Kurt; Zipfel, Stephan; Forschner, Andrea

2017-09-01

Despite an increasing number of promising treatment options, only a limited number of studies concerning melanoma patients' psycho-oncological distress have been carried out. However, multiple screening tools are in use to assess the need for psycho-oncological support. This study aimed first to identify parameters in melanoma patients that are associated with a higher risk for being psycho-oncologically distressed and second to compare patients' self-evaluation concerning the need for psycho-oncological support with the results of established screening tools.We performed a cross-sectional study including 254 melanoma patients from the Center for Dermatooncology at the University of Tuebingen. The study was performed between June 2010 and February 2013. Several screening instruments were included: the Distress Thermometer (DT), Hospital Anxiety and Depression Scale and the patients' subjective evaluation concerning psycho-oncological support. Binary logistic regression was performed to identify factors that indicate the need for psycho-oncological support.Patients' subjective evaluation concerning the need for psycho-oncological support, female gender, and psychotherapeutic or psychiatric treatment at present or in the past had the highest impact on values above threshold in the DT. The odds ratio of patients' self-evaluation (9.89) was even higher than somatic factors like female gender (1.85), duration of illness (0.99), or increasing age (0.97). Patients' self-evaluation concerning the need for psycho-oncological support indicated a moderate correlation with the results of the screening tools included.In addition to the results obtained by screening tools like the DT, we could demonstrate that patients' self-evaluation is an important instrument to identify patients who need psycho-oncological support.

A Systematic Literature Review on Evaluation of Digital Tools for Authoring Evidence-Based Clinical Guidelines.

PubMed

Khodambashi, Soudabeh; Nytrø, Øystein

2017-01-01

To facilitate the clinical guideline (GL) development process, different groups of researchers have proposed tools that enable computer-supported tools for authoring and publishing GLs. In a previous study we interviewed GL authors in different Norwegian institutions and identified tool shortcomings. In this follow-up study our goal is to explore to what extent GL authoring tools have been evaluated by researchers, guideline organisations, or GL authors. This article presents results from a systematic literature review of evaluation (including usability) of GL authoring tools. A controlled database search and backward snow-balling were used to identify relevant articles. From the 12692 abstracts found, 188 papers were fully reviewed and 26 papers were identified as relevant. The GRADEPro tool has attracted some evaluation, however popular tools and platforms such as DECIDE, Doctor Evidence, JBI-SUMARI, G-I-N library have not been subject to specific evaluation from an authoring perspective. Therefore, we found that little attention was paid to the evaluation of the tools in general. We could not find any evaluation relevant to how tools integrate and support the complex GL development workflow. The results of this paper are highly relevant to GL authors, tool developers and GL publishing organisations in order to improve and control the GL development and maintenance process.

Current State and Model for Development of Technology-Based Care for Attention Deficit Hyperactivity Disorder

PubMed Central

Riley, Steven J.; Calub, Catrina A.; Schweitzer, Julie B.

2016-01-01

Abstract Introduction: Care (i.e., evaluation and intervention) delivered through technology is used in many areas of mental health services, including for persons with attention deficit hyperactivity disorder (ADHD). Technology can facilitate care for individuals with ADHD, their parents, and their care providers. The adoption of technological tools for ADHD care requires evidence-based studies to support the transition from development to integration into use in the home, school, or work for persons with the disorder. The initial phase, which is development of technological tools, has begun in earnest; however, the evidence base for many of these tools is lacking. In some instances, the uptake of a piece of technology into home use or clinical practice may be further along than the research to support its use. Methods: In this study, we review the current evidence regarding technology for ADHD and also propose a model to evaluate the support for other tools that have yet to be tested. Results: We propose using the Research Domain Criteria as a framework for evaluating the tools' relationships to dimensions related to ADHD. Conclusion: This article concludes with recommendations for testing new tools that may have promise in improving the evaluation or treatment of persons with ADHD. PMID:26985703

A decision support tool to determine cost-to-benefit of a family-centered in-home program for at-risk adolescents.

PubMed

Wilson, Fernando A; Araz, Ozgur M; Thompson, Ronald W; Ringle, Jay L; Mason, W Alex; Stimpson, Jim P

2016-06-01

Family-centered program research has demonstrated its effectiveness in improving adolescent outcomes. However, given current fiscal constraints faced by governmental agencies, a recent report from the Institute of Medicine and National Research Council highlighted the need for cost-benefit analyses to inform decision making by policymakers. Furthermore, performance management tools such as balanced scorecards and dashboards do not generally include cost-benefit analyses. In this paper, we describe the development of an Excel-based decision support tool that can be used to evaluate a selected family-based program for at-risk children and adolescents relative to a comparison program or the status quo. This tool incorporates the use of an efficient, user-friendly interface with results provided in concise tabular and graphical formats that may be interpreted without need for substantial training in economic evaluation. To illustrate, we present an application of this tool to evaluate use of Boys Town's In-Home Family Services (IHFS) relative to detention and out-of-home placement in New York City. Use of the decision support tool can help mitigate the need for programs to contract experts in economic evaluation, especially when there are financial or time constraints. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mediated learning in the workplace: student perspectives on knowledge resources.

PubMed

Shanahan, Madeleine

2015-01-01

In contemporary clinical practice, student radiographers can use many types of knowledge resources to support their learning. These include workplace experts, digital and nondigital information sources (eg, journals, textbooks, and the Internet), and electronic communication tools such as e-mail and social media. Despite the range of knowledge tools available, there is little available data about radiography students' use of these resources during clinical placement. A 68-item questionnaire was distributed to 62 students enrolled in an Australian university undergraduate radiography program after they completed a clinical placement. Researchers used descriptive statistics to analyze student access to workplace experts and their use of digital and nondigital information sources and electronic communication tools. A 5-point Likert scale (1 = very important; 5 = not important) was used to assess the present importance and perceived future value of knowledge tools for workplace learning. Of the 53 students who completed and returned the questionnaire anonymously, most rely on the knowledge of practicing technologists and on print and electronic information sources to support their learning; some students also use electronic communication tools. Students perceive that these knowledge resources also will be important tools for their future learning as qualified health professionals. The findings from this study present baseline data regarding the value students attribute to multiple knowledge tools and regarding student access to and use of these tools during clinical placement. In addition, most students have access to multiple knowledge tools in the workplace and incorporate these tools simultaneously into their overall learning practice during clinical placement. Although a range of knowledge tools is used in the workplace to support learning among student radiographers, the quality of each tool should be critically analyzed before it is adopted in practice. Integrating practice-based learning with learning mediated by information sources provides a more complete paradigm of learning during clinical placement.

Operational test results of the passive final approach spacing tool

DOT National Transportation Integrated Search

1997-06-01

A prototype decision support tool for terminal area air traffic controllers, : referred to as the Final Approach Spacing Tool (FAST), was recently evaluated in : operation with live air traffic at the Dallas/Fort Worth, Texas Airport, : Controllers u...

Final Documentation: Incident Management And Probabilities Courses of action Tool (IMPACT).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, Donna M.; Ray, Jaideep; Tucker, Mark D.

This report pulls together the documentation produced for the IMPACT tool, a software-based decision support tool that provides situational awareness, incident characterization, and guidance on public health and environmental response strategies for an unfolding bio-terrorism incident.

Chronic condition self-management support for Aboriginal people: Adapting tools and training.

PubMed

Battersby, Malcolm; Lawn, Sharon; Kowanko, Inge; Bertossa, Sue; Trowbridge, Coral; Liddicoat, Raylene

2018-04-22

Chronic conditions are major health problems for Australian Aboriginal people. Self-management programs can improve health outcomes. However, few health workers are skilled in self-management support and existing programs are not always appropriate in Australian Aboriginal contexts. The goal was to increase the capacity of the Australian health workforce to support Australian Aboriginal people to self-manage their chronic conditions by adapting the Flinders Program of chronic condition self-management support for Australian Aboriginal clients and develop and deliver training for health professionals to implement the program. Feedback from health professionals highlighted that the Flinders Program assessment and care planning tools needed to be adapted to suit Australian Aboriginal contexts. Through consultation with Australian Aboriginal Elders and other experts, the tools were condensed into an illustrated booklet called 'My Health Story'. Associated training courses and resources focusing on cultural safety and effective engagement were developed. A total of 825 health professionals  across Australia was trained and 61 people qualified as accredited trainers in the program, ensuring sustainability. The capacity and skills of the Australian health workforce to engage with and support Australian Aboriginal people to self-manage their chronic health problems significantly increased as a result of this project. The adapted tools and training were popular and appreciated by the health care organisations, health professionals and clients involved. The adapted tools have widespread appeal for cultures that do not have Western models of health care and where there are health literacy challenges. My Health Story has already been used internationally. © 2018 National Rural Health Alliance Ltd.

Community Crowd-Funded Solar Finance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jagerson, Gordon "Ty"

The award supported the demonstration and development of the Village Power Platform, which enables community organizations to more readily develop, finance and operate solar installations on local community organizations. The platform enables partial or complete local ownership of the solar installation. The award specifically supported key features including financial modeling tools, community communications tools, crowdfunding mechanisms, a mobile app, and other critical features.

Ambitious Pedagogy by Novice Teachers: Who Benefits from Tool-Supported Collaborative Inquiry into Practice and Why?

ERIC Educational Resources Information Center

Windschitl, Mark; Thompson, Jessica; Braaten, Melissa

2011-01-01

Background/Context: The collegial analysis of student work artifacts has been effective in advancing the practice of experienced teachers; however, the use of such strategies as a centerpiece for induction has not been explored, nor has the development of tool systems to support such activity with novices. Purpose/Objective: We tested the…

Bioenergy Knowledge Discovery Framework Fact Sheet

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The Bioenergy Knowledge Discovery Framework (KDF) supports the development of a sustainable bioenergy industry by providing access to a variety of data sets, publications, and collaboration and mapping tools that support bioenergy research, analysis, and decision making. In the KDF, users can search for information, contribute data, and use the tools and map interface to synthesize, analyze, and visualize information in a spatially integrated manner.

A Cultural-Historical Reading of How Play Is Used in Families as a Tool for Supporting Children's Emotional Development in Everyday Life

ERIC Educational Resources Information Center

Chen, Feiyan; Fleer, Marilyn

2016-01-01

Many studies have identified the positive "link" between imaginary play and emotion regulation in laboratory settings. However, little is known about "how" play and emotion regulation are related in everyday practice. This article examines how families use play as a tool to support young children's emotion regulation in…

Integrating forest stand projections with wildlife occupancy models to develop a decision support tool

Treesearch

Michelle F. Tacconelli; Edward F. Loewenstein

2012-01-01

Natural resource managers must often balance multiple objectives on a single property. When these objectives are seemingly conflicting, the manager’s job can be extremely difficult and complex. This paper presents a decision support tool, designed to aid land managers in optimizing wildlife habitat needs while accomplishing additional objectives such as ecosystem...

Health System Decision Makers' Feedback on Summaries and Tools Supporting the Use of Systematic Reviews: A Qualitative Study

ERIC Educational Resources Information Center

Ellen, Moriah E.; Lavis, John N.; Wilson, Michael G.; Grimshaw, Jeremy; Haynes, R. Brian; Ouimet, Mathieu; Raina, Parminder; Gruen, Russell

2014-01-01

Health system managers and policy makers need timely access to high quality, policy-relevant systematic reviews. Our objectives were to obtain managers' and policy makers' feedback about user-friendly summaries of systematic reviews and about tools related to supporting or assessing their use. Our interviews identified that participants prefer key…

Modern Languages and Specific Learning Difficulties (SpLD): Implications of Teaching Adult Learners with Dyslexia in Distance Learning

ERIC Educational Resources Information Center

Gallardo, Matilde; Heiser, Sarah; Arias McLaughlin, Ximena

2015-01-01

In modern language (ML) distance learning programmes, teachers and students use online tools to facilitate, reinforce and support independent learning. This makes it essential for teachers to develop pedagogical expertise in using online communication tools to perform their role. Teachers frequently raise questions of how best to support the needs…

Community College Fundraising: The Voluntary Support of Education Survey as a Sampling Tool for Research

ERIC Educational Resources Information Center

Wagoner, Richard L.; Besikof, Rudolph J.

2011-01-01

This article describes the Voluntary Support for Education (VSE) Survey, an instrument created by the Council for Aid to Education. Our objective is to explain VSE's potential value as a tool to inform both institutional and academic research regarding fund-raising activities at community colleges. Of particular interest is how the data available…

Structure of the Brazilian Sign Language (Libras) for Computational Tools: Citizenship and Social Inclusion

NASA Astrophysics Data System (ADS)

Guimaraes, Cayley; Antunes, Diego R.; de F. Guilhermino Trindade, Daniela; da Silva, Rafaella A. Lopes; Garcia, Laura Sanchez

This work presents a computational model (XML) of the Brazilian Sign Language (Libras), based on its phonology. The model was used to create a sample of representative signs to aid the recording of a base of videos whose aim is to support the development of tools to support genuine social inclusion of the deaf.

Developing an Ecosystem Services online Decision Support Tool to Assess the Impacts of Climate Change and Urban Growth in the Santa Cruz Watershed; Where We Live, Work, and Play

EPA Science Inventory

Processes through which ecosystems provide goods or benefit people can be referred to as "ecosystems services”, which may be quantified to clarify decision-making, with techniques including cost-benefit analysis. We are developing an online decision support tool, the Santa Cruz W...

Mediated Authentic Video: A Flexible Tool Supporting a Developmental Approach to Teacher Education

ERIC Educational Resources Information Center

Stutchbury, Kris; Woodward, Clare

2017-01-01

YouTube now has more searches than Google, indicating that video is a motivating and, potentially, powerful learning tool. This paper investigates how we can embrace video to support improvements in teacher education. It will draw on innovative approaches to teacher education, developed by the Open University UK, in order to explore in more depth…

Additional Support for the Information Systems Analyst Exam as a Valid Program Assessment Tool

ERIC Educational Resources Information Center

Carpenter, Donald A.; Snyder, Johnny; Slauson, Gayla Jo; Bridge, Morgan K.

2011-01-01

This paper presents a statistical analysis to support the notion that the Information Systems Analyst (ISA) exam can be used as a program assessment tool in addition to measuring student performance. It compares ISA exam scores earned by students in one particular Computer Information Systems program with scores earned by the same students on the…

Extravehicular Activity System Sizing Analysis Tool (EVAS_SAT)

NASA Technical Reports Server (NTRS)

Brown, Cheryl B.; Conger, Bruce C.; Miranda, Bruno M.; Bue, Grant C.; Rouen, Michael N.

2007-01-01

An effort was initiated by NASA/JSC in 2001 to develop an Extravehicular Activity System Sizing Analysis Tool (EVAS_SAT) for the sizing of Extravehicular Activity System (EVAS) architecture and studies. Its intent was to support space suit development efforts and to aid in conceptual designs for future human exploration missions. Its basis was the Life Support Options Performance Program (LSOPP), a spacesuit and portable life support system (PLSS) sizing program developed for NASA/JSC circa 1990. EVAS_SAT estimates the mass, power, and volume characteristics for user-defined EVAS architectures, including Suit Systems, Airlock Systems, Tools and Translation Aids, and Vehicle Support equipment. The tool has undergone annual changes and has been updated as new data have become available. Certain sizing algorithms have been developed based on industry standards, while others are based on the LSOPP sizing routines. The sizing algorithms used by EVAS_SAT are preliminary. Because EVAS_SAT was designed for use by members of the EVA community, subsystem familiarity on the part of the intended user group and in the analysis of results is assumed. The current EVAS_SAT is operated within Microsoft Excel 2003 using a Visual Basic interface system.

Near-Infrared Neuroimaging with NinPy

PubMed Central

Strangman, Gary E.; Zhang, Quan; Zeffiro, Thomas

2009-01-01

There has been substantial recent growth in the use of non-invasive optical brain imaging in studies of human brain function in health and disease. Near-infrared neuroimaging (NIN) is one of the most promising of these techniques and, although NIN hardware continues to evolve at a rapid pace, software tools supporting optical data acquisition, image processing, statistical modeling, and visualization remain less refined. Python, a modular and computationally efficient development language, can support functional neuroimaging studies of diverse design and implementation. In particular, Python's easily readable syntax and modular architecture allow swift prototyping followed by efficient transition to stable production systems. As an introduction to our ongoing efforts to develop Python software tools for structural and functional neuroimaging, we discuss: (i) the role of non-invasive diffuse optical imaging in measuring brain function, (ii) the key computational requirements to support NIN experiments, (iii) our collection of software tools to support NIN, called NinPy, and (iv) future extensions of these tools that will allow integration of optical with other structural and functional neuroimaging data sources. Source code for the software discussed here will be made available at www.nmr.mgh.harvard.edu/Neural_SystemsGroup/software.html. PMID:19543449

Invasive Species Forecasting System: A Decision Support Tool for the U.S. Geological Survey: FY 2005 Benchmarking Report v.1.6

NASA Technical Reports Server (NTRS)

Stohlgren, Tom; Schnase, John; Morisette, Jeffrey; Most, Neal; Sheffner, Ed; Hutchinson, Charles; Drake, Sam; Van Leeuwen, Willem; Kaupp, Verne

2005-01-01

The National Institute of Invasive Species Science (NIISS), through collaboration with NASA's Goddard Space Flight Center (GSFC), recently began incorporating NASA observations and predictive modeling tools to fulfill its mission. These enhancements, labeled collectively as the Invasive Species Forecasting System (ISFS), are now in place in the NIISS in their initial state (V1.0). The ISFS is the primary decision support tool of the NIISS for the management and control of invasive species on Department of Interior and adjacent lands. The ISFS is the backbone for a unique information services line-of-business for the NIISS, and it provides the means for delivering advanced decision support capabilities to a wide range of management applications. This report describes the operational characteristics of the ISFS, a decision support tool of the United States Geological Survey (USGS). Recent enhancements to the performance of the ISFS, attained through the integration of observations, models, and systems engineering from the NASA are benchmarked; i.e., described quantitatively and evaluated in relation to the performance of the USGS system before incorporation of the NASA enhancements. This report benchmarks Version 1.0 of the ISFS.

Irena : tool suite for modeling and analysis of small-angle scattering.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ilavsky, J.; Jemian, P.

2009-04-01

Irena, a tool suite for analysis of both X-ray and neutron small-angle scattering (SAS) data within the commercial Igor Pro application, brings together a comprehensive suite of tools useful for investigations in materials science, physics, chemistry, polymer science and other fields. In addition to Guinier and Porod fits, the suite combines a variety of advanced SAS data evaluation tools for the modeling of size distribution in the dilute limit using maximum entropy and other methods, dilute limit small-angle scattering from multiple non-interacting populations of scatterers, the pair-distance distribution function, a unified fit, the Debye-Bueche model, the reflectivity (X-ray and neutron)more » using Parratt's formalism, and small-angle diffraction. There are also a number of support tools, such as a data import/export tool supporting a broad sampling of common data formats, a data modification tool, a presentation-quality graphics tool optimized for small-angle scattering data, and a neutron and X-ray scattering contrast calculator. These tools are brought together into one suite with consistent interfaces and functionality. The suite allows robust automated note recording and saving of parameters during export.« less

A tool to support meaningful person-centred activity for clients with dementia - a Delphi study.

PubMed

Lloyd, Barbara; Stirling, Christine

2015-01-01

This paper reports on a study to validate the concept of the 'Activity Support Tool' that aimed to assist dementia service workers to identify and act upon the support needs of people with dementia living alone, in line with the person-centred ideal. The tool was part of a two-stage exploratory qualitative study, which used interview and observational data from seven people with dementia living alone. Findings highlighted that people with dementia use objects and spaces within their homes to maintain or re-enact identities from the past. Thematic results from interviews were translated into a tool, with construct validation using the Delphi technique. Eighteen expert health professionals received round one of the questionnaire and six participants completed round three. The first round directed our focus towards operationalizing the person-centred ideal of dementia care. The tool was considered by almost all advisory panel members to be a potentially valuable resource for helping to address impediments to integrated, effective and person-centred dementia care. Specific strengths identified were simplicity, person-centeredness and applicability across service settings. Issues of concern included practicability, risk management, gender stereotyping and terminology. The results support the findings of previous research into the intuitive and ethical appeal, but problematic applicability, of person-centred dementia services. Health professionals with a range of service-related expertise found the concept of person-centred care compelling, but required tangible, enduring structures to translate the ideal into practical action. The tool now requires further research to test its usefulness in practice.

Application of ESE Data and Tools to Air Quality Management: Services for Helping the Air Quality Community use ESE Data (SHAirED)

NASA Technical Reports Server (NTRS)

Falke, Stefan; Husar, Rudolf

2011-01-01

The goal of this REASoN applications and technology project is to deliver and use Earth Science Enterprise (ESE) data and tools in support of air quality management. Its scope falls within the domain of air quality management and aims to develop a federated air quality information sharing network that includes data from NASA, EPA, US States and others. Project goals were achieved through a access of satellite and ground observation data, web services information technology, interoperability standards, and air quality community collaboration. In contributing to a network of NASA ESE data in support of particulate air quality management, the project will develop access to distributed data, build Web infrastructure, and create tools for data processing and analysis. The key technologies used in the project include emerging web services for developing self describing and modular data access and processing tools, and service oriented architecture for chaining web services together to assemble customized air quality management applications. The technology and tools required for this project were developed within DataFed.net, a shared infrastructure that supports collaborative atmospheric data sharing and processing web services. Much of the collaboration was facilitated through community interactions through the Federation of Earth Science Information Partners (ESIP) Air Quality Workgroup. The main activities during the project that successfully advanced DataFed, enabled air quality applications and established community-oriented infrastructures were: develop access to distributed data (surface and satellite), build Web infrastructure to support data access, processing and analysis create tools for data processing and analysis foster air quality community collaboration and interoperability.

DAWN (Design Assistant Workstation) for advanced physical-chemical life support systems

NASA Technical Reports Server (NTRS)

Rudokas, Mary R.; Cantwell, Elizabeth R.; Robinson, Peter I.; Shenk, Timothy W.

1989-01-01

This paper reports the results of a project supported by the National Aeronautics and Space Administration, Office of Aeronautics and Space Technology (NASA-OAST) under the Advanced Life Support Development Program. It is an initial attempt to integrate artificial intelligence techniques (via expert systems) with conventional quantitative modeling tools for advanced physical-chemical life support systems. The addition of artificial intelligence techniques will assist the designer in the definition and simulation of loosely/well-defined life support processes/problems as well as assist in the capture of design knowledge, both quantitative and qualitative. Expert system and conventional modeling tools are integrated to provide a design workstation that assists the engineer/scientist in creating, evaluating, documenting and optimizing physical-chemical life support systems for short-term and extended duration missions.

SMARTE: IMPROVING REVITALIZATION DECISIONS (BERLIN, GERMANY)

EPA Science Inventory

The U.S.-German Bilateral Working Group is developing Site-specific Management Approaches and Redevelopment Tools (SMART). In the U.S., the SMART compilation is housed in a web-based, decision support tool called SMARTe. All tools within SMARTe that are developed specifically for...

Tool For Installation Of Seal In Tube Fitting

NASA Technical Reports Server (NTRS)

Trevathan, Joseph R.

1993-01-01

Plierslike tool helps secure repair seal in fitting. Tool crimps repair seal into tube fitting, ensuring tight fit every time. Modified pair of snapring pliers to which knife-edge jaws have been added. Spring added between handles. Also includes separate, accompanying support ring.

Investigating Analytic Tools for e-Book Design in Early Literacy Learning

ERIC Educational Resources Information Center

Roskos, Kathleen; Brueck, Jeremy; Widman, Sarah

2009-01-01

Toward the goal of better e-book design to support early literacy learning, this study investigates analytic tools for examining design qualities of e-books for young children. Three research-based analytic tools related to e-book design were applied to a mixed genre collection of 50 e-books from popular online sites. Tool performance varied…

Designing and Implementing Web-Based Scaffolding Tools for Technology-Enhanced Socioscientific Inquiry

ERIC Educational Resources Information Center

Shin, Suhkyung; Brush, Thomas A.; Glazewski, Krista D.

2017-01-01

This study explores how web-based scaffolding tools provide instructional support while implementing a socio-scientific inquiry (SSI) unit in a science classroom. This case study focused on how students used web-based scaffolding tools during SSI activities, and how students perceived the SSI unit and the scaffolding tools embedded in the SSI…

Diagnostic Tools for the Systemic Reform of Schools.

ERIC Educational Resources Information Center

Amsler, Mary; Kirsch, Kayla

This paper presents three interrelated diagnostic tools that can be used by school staff as they begin to plan a systemic reform effort. These tools are designed to help educators reflect on their experiences in creating changes in their school and to examine the current barriers to and supports for the change process. The tools help school design…

An Instructional Feedback Technique for Teaching Project Management Tools Aligned with PMBOK

ERIC Educational Resources Information Center

Gonçalves, Rafael Queiroz; von Wangenheim, Christiane Gresse; Hauck, Jean Carlo Rossa; Petri, Giani

2017-01-01

The management of contemporary software projects is unfeasible without the support of a Project Management (PM) tool. In order to enable the adoption of PM tools in practice, teaching its usage is important as part of computer education. Aiming at teaching PM tools, several approaches have been proposed, such as the development of educational PM…

Photomat: A Mobile Tool for Aiding in Student Construction of Research Questions and Data Analysis

ERIC Educational Resources Information Center

Shelley, Tia Renee; Dasgupta, Chandan; Silva, Alexandra; Lyons, Leilah; Moher, Tom

2015-01-01

This paper presents a new mobile software tool, PhotoMAT (Photo Management and Analysis Tool), and students' experiences with this tool within a scaffolded curricular unit--Neighborhood Safari. PhotoMAT was designed to support learners' investigations of backyard animal behavior and works with image sets obtained using fixed-position field cameras…

Operational Models Supporting Manned Space Flight

NASA Astrophysics Data System (ADS)

Johnson, A. S.; Weyland, M. D.; Lin, T. C.; Zapp, E. N.

2006-12-01

The Space Radiation Analysis Group (SRAG) at Johnson Space Center (JSC) has the primary responsibility to provide real-time radiation health operational support for manned space flight. Forecasts from NOAA SEC, real-time space environment data and radiation models are used to infer changes in the radiation environment due to space weather. Unlike current operations in low earth orbit which are afforded substantial protection from the geomagnetic field, exploration missions will have little protection and require improved operational tools for mission support. The current state of operational models and their limitations will be presented as well as an examination of needed tools to support exploration missions.

HNS-MS : Improving Member States preparedness to face an HNS pollution of the Marine System

NASA Astrophysics Data System (ADS)

Legrand, Sebastien; Le Floch, Stéphane; Aprin, Laurent; Parthenay, Valérie; Donnay, Eric; Parmentier, Koen; Ovidio, Fabrice; Schallier, Ronny; Poncet, Florence; Chataing, Sophie; Poupon, Emmanuelle; Hellouvry, Yann-Hervé

2016-04-01

When dealing with a HNS pollution incident, one of the priority requirements is the identification of the hazard and an assessment of the risk posed to the public and responder safety, the environment and socioeconomic assets upon which a state or coastal community depend. The primary factors which determine the safety, environmental and socioeconomic impact of the released substance(s) relate to their physico-chemical properties and fate in the environment. Until now, preparedness actions at various levels have primarily aimed at classifying the general environmental or public health hazard of an HNS, or at performing a risk analysis of HNS transported in European marine regions. Operational datasheets have been (MIDSIS-TROCS) or are being (MAR-CIS) developed collating detailed, substance-specific information for responders and covering information needs at the first stage of an incident. However, contrary to oil pollution preparedness and response tools, only few decision-support tools used by Member State authorities (Coastguard agencies or other) integrate 3D models that are able to simulate the drift, fate and behaviour of HNS spills in the marine environment. When they do, they usually consider simplified or steady-state environmental conditions. Moreover, the above-mentioned available HNS information is currently not sufficiently detailed or not suitably classified to be used as an input for an advanced HNS support decision tool. HNS-MS aims at developing a 'one-stop shop' integrated HNS decision-support tool that is able to predict the drift, behaviour and Fate of HNS spills under realistic environmental conditions and at providing key product information - drawing upon and in complement to existing studies and databases - to improve the understanding and evaluation of a HNS spill situation in the field and the environmental and safety-related issues at stake. The 3D HNS drift and fate model and decision-support tool will also be useful at the preparedness stage. The expected results will be an operational HNS decision-support tool (prototype) for the Bonn Agreement area that can also be viewed as a demonstrator tool for other European marine regions. The developed tool will have a similar operational level as OSERIT, the Belgian oil spill drift model. The HNS decision-support tool will integrate the following features: 1. A database containing the physico-chemical parameters needed to compute the behaviour in the marine environment of 100+ relevant HNS; 2. A database of environmental and socioeconomic HNS-sensitive features; 3. A three dimensional HNS spill drift and fate model able to simulate HNS behaviour in the marine environment (including floaters, sinkers, evaporators and dissolvers). 4. A user-friendly web-based interface allowing Coastguard stations to launch a HNS drift simulation and visualize post-processed results in support of an incident evaluation and decision-making process. In this contribution, we will present the methodology followed to develop these four features.

BASINS and WEPP Climate Assessment Tools (CAT): Case ...

EPA Pesticide Factsheets

This draft report supports application of two recently developed water modeling tools, the BASINS and WEPP climate assessment tools. The report presents a series of short case studies designed to illustrate the capabilities of these tools for conducting scenario based assessments of the potential future effects of climate change on water resources. This report presents a series of short, illustrative case studies using the BASINS and WEPP climate assessment tools.

Tool Use Within NASA Software Quality Assurance

NASA Technical Reports Server (NTRS)

Shigeta, Denise; Port, Dan; Nikora, Allen P.; Wilf, Joel

2013-01-01

As space mission software systems become larger and more complex, it is increasingly important for the software assurance effort to have the ability to effectively assess both the artifacts produced during software system development and the development process itself. Conceptually, assurance is a straightforward idea - it is the result of activities carried out by an organization independent of the software developers to better inform project management of potential technical and programmatic risks, and thus increase management's confidence in the decisions they ultimately make. In practice, effective assurance for large, complex systems often entails assessing large, complex software artifacts (e.g., requirements specifications, architectural descriptions) as well as substantial amounts of unstructured information (e.g., anomaly reports resulting from testing activities during development). In such an environment, assurance engineers can benefit greatly from appropriate tool support. In order to do so, an assurance organization will need accurate and timely information on the tool support available for various types of assurance activities. In this paper, we investigate the current use of tool support for assurance organizations within NASA, and describe on-going work at JPL for providing assurance organizations with the information about tools they need to use them effectively.

The Development of a Humanitarian Health Ethics Analysis Tool.

PubMed

Fraser, Veronique; Hunt, Matthew R; de Laat, Sonya; Schwartz, Lisa

2015-08-01

Introduction Health care workers (HCWs) who participate in humanitarian aid work experience a range of ethical challenges in providing care and assistance to communities affected by war, disaster, or extreme poverty. Although there is increasing discussion of ethics in humanitarian health care practice and policy, there are very few resources available for humanitarian workers seeking ethical guidance in the field. To address this knowledge gap, a Humanitarian Health Ethics Analysis Tool (HHEAT) was developed and tested as an action-oriented resource to support humanitarian workers in ethical decision making. While ethical analysis tools increasingly have become prevalent in a variety of practice contexts over the past two decades, very few of these tools have undergone a process of empirical validation to assess their usefulness for practitioners. A qualitative study consisting of a series of six case-analysis sessions with 16 humanitarian HCWs was conducted to evaluate and refine the HHEAT. Participant feedback inspired the creation of a simplified and shortened version of the tool and prompted the development of an accompanying handbook. The study generated preliminary insight into the ethical deliberation processes of humanitarian health workers and highlighted different types of ethics support that humanitarian workers might find helpful in supporting the decision-making process.

Supporting Data Stewardship Throughout the Data Life Cycle in the Solid Earth Sciences

NASA Astrophysics Data System (ADS)

Ferrini, V.; Lehnert, K. A.; Carbotte, S. M.; Hsu, L.

2013-12-01

Stewardship of scientific data is fundamental to enabling new data-driven research, and ensures preservation, accessibility, and quality of the data, yet researchers, especially in disciplines that typically generate and use small, but complex, heterogeneous, and unstructured datasets are challenged to fulfill increasing demands of properly managing their data. The IEDA Data Facility (www.iedadata.org) provides tools and services that support data stewardship throughout the full life cycle of observational data in the solid earth sciences, with a focus on the data management needs of individual researchers. IEDA builds upon and brings together over a decade of development and experiences of its component data systems, the Marine Geoscience Data System (MGDS, www.marine-geo.org) and EarthChem (www.earthchem.org). IEDA services include domain-focused data curation and synthesis, tools for data discovery, access, visualization and analysis, as well as investigator support services that include tools for data contribution, data publication services, and data compliance support. IEDA data synthesis efforts (e.g. PetDB and Global Multi-Resolution Topography (GMRT) Synthesis) focus on data integration and analysis while emphasizing provenance and attribution. IEDA's domain-focused data catalogs (e.g. MGDS and EarthChem Library) provide access to metadata-rich long-tail data complemented by extensive metadata including attribution information and links to related publications. IEDA's visualization and analysis tools (e.g. GeoMapApp) broaden access to earth science data for domain specialist and non-specialists alike, facilitating both interdisciplinary research and education and outreach efforts. As a disciplinary data repository, a key role IEDA plays is to coordinate with its user community and to bridge the requirements and standards for data curation with both the evolving needs of its science community and emerging technologies. Development of IEDA tools and services is based first and foremost on the scientific needs of its user community. As data stewardship becomes a more integral component of the scientific workflow, IEDA investigator support services (e.g. Data Management Plan Tool and Data Compliance Reporting Tool) continue to evolve with the goal of lessening the 'burden' of data management for individual investigators by increasing awareness and facilitating the adoption of data management practices. We will highlight a variety of IEDA system components that support investigators throughout the data life cycle, and will discuss lessons learned and future directions.

Lessons Learned from Optical Payload for Lasercomm Science (OPALS) Mission Operations

NASA Technical Reports Server (NTRS)

Sindiy, Oleg V.; Abrahamson, Matthew J.; Biswas, Abhijit; Wright, Malcolm W.; Padams, Jordan H.; Konyha, Alexander L.

2015-01-01

This paper provides an overview of Optical Payload for Lasercomm Science (OPALS) activities and lessons learned during mission operations. Activities described cover the periods of commissioning, prime, and extended mission operations, during which primary and secondary mission objectives were achieved for demonstrating space-to-ground optical communications. Lessons learned cover Mission Operations System topics in areas of: architecture verification and validation, staffing, mission support area, workstations, workstation tools, interfaces with support services, supporting ground stations, team training, procedures, flight software upgrades, post-processing tools, and public outreach.

Which Air Force Civil Engineer Capabilities Can Complement USNORTHCOM’s Role in Defense Support to Civil Authorities (DSCA)?

DTIC Science & Technology

2014-05-21

UTC REQUIRES PERSONNEL FROM STANDARD PRIME BEEF OR RED 4F9K4 PROVIDES FOLDED FIBERGLASS MATTING ( FFM ) FOR AIRFIELD DAMAGE REPAIR (ADR). PACKAGE...CONSISTS OF THREE FFM SETS (54’ X 60’), ONE FFM SUPPORT TOOL KIT, UPPER BUSHINGS, ANCHOR BUSHINGS, ANCHOR BOLTS, AND TWO EA MC-7 AIR COMPRESSORS. EACH...PACKAGE CONSISTS OF 7 FOLDED FIBERGLASS MAT SETS (54 FT X 60 FT), 2 FFM SUPPORT TOOL KIT, UPPER BUSHINGS, ANCHOR BUSHINGS, ANCHOR BOLTS AND 4 X

Open Tools for Integrated Modelling to Understand SDG development - The OPTIMUS program

NASA Astrophysics Data System (ADS)

Howells, Mark; Zepeda, Eduardo; Rogner, H. Holger; Sanchez, Marco; Roehrl, Alexander; Cicowiez, Matrin; Mentis, Dimitris; Korkevelos, Alexandros; Taliotis, Constantinos; Broad, Oliver; Alfstad, Thomas

2016-04-01

The recently adopted Sustainable Development Goals (SDGs) - a set of 17 measurable and time-bound goals with 169 associated targets for 2030 - are highly inclusive challenges before the world community ranging from eliminating poverty to human rights, inequality, a secure world and protection of the environment. Each individual goal or target by themselves present enormous tasks, taken together they are overwhelming. There strong and weak interlinkages, hence trade-offs and complementarities among goals and targets. Some targets may affect several goals while other goals and targets may conflict or be mutually exclusive (Ref). Meeting each of these requires the judicious exploitation of resource, with energy playing an important role. Such complexity demands to be addressed in an integrated way using systems analysis tools to support informed policy formulation, planning, allocation of scarce resources, monitoring progress, effectiveness and review at different scales. There is no one size fits all methodology that conceivably could include all goal and targets simultaneously. But there are methodologies encapsulating critical subsets of the goal and targets with strong interlinkages with a 'soft' reflection on the weak interlinkages. Universal food security or sustainable energy for all inherently support goals and targets on human rights and equality but possibly at the cost of biodiversity or desertification. Integrated analysis and planning tools are not yet commonplace at national universities - or indeed in many policy making organs. What is needed is a fundamental realignment of institutions and integrations of their planning processes and decision making. We introduce a series of open source tools to support the SDG planning and implementation process. The Global User-friendly CLEW Open Source (GLUCOSE) tool optimizes resource interactions and constraints; The Global Electrification Tool kit (GETit) provides the first global spatially explicit electrification simulator; A national CLEW tool allows for the optimization of national level integrated resource use and Macro-CLEW presents the same allowing for detailed economic-biophysical interactions. Finally open Model Management Infrastructure (MoManI) is presented that allows for the rapid prototyping of new additions to, or new resource optimization tools. Collectively these tools provide insights to some fifteen of the SDGs and are made publicly available with support to governments and academic institutions.

A modeling tool to support decision making in future hydropower development in Chile

NASA Astrophysics Data System (ADS)

Vicuna, S.; Hermansen, C.; Cerda, J. P.; Olivares, M. A.; Gomez, T. I.; Toha, E.; Poblete, D.; Mao, L.; Falvey, M. J.; Pliscoff, P.; Melo, O.; Lacy, S.; Peredo, M.; Marquet, P. A.; Maturana, J.; Gironas, J. A.

2017-12-01

Modeling tools support planning by providing transparent means to assess the outcome of natural resources management alternatives within technical frameworks in the presence of conflicting objectives. Such tools, when employed to model different scenarios, complement discussion in a policy-making context. Examples of practical use of this type of tool exist, such as the Canadian public forest management, but are not common, especially in the context of developing countries. We present a tool to support the selection from a portfolio of potential future hydropower projects in Chile. This tool, developed by a large team of researchers under the guidance of the Chilean Energy Ministry, is especially relevant in the context of evident regionalism, skepticism and change in societal values in a country that has achieved a sustained growth alongside increased demands from society. The tool operates at a scale of a river reach, between 1-5 km long, on a domain that can be defined according to the scale needs of the related discussion, and its application can vary from river basins to regions or other spatial configurations that may be of interest. The tool addresses both available hydropower potential and the existence (inferred or observed) of other ecological, social, cultural and productive characteristics of the territory which are valuable to society, and provides a means to evaluate their interaction. The occurrence of each of these other valuable characteristics in the territory is measured by generating a presence-density score for each. Considering the level of constraint each characteristic imposes on hydropower development, they are weighted against each other and an aggregate score is computed. With this information, optimal trade-offs are computed between additional hydropower capacity and valuable local characteristics over the entire domain, using the classical knapsack 0-1 optimization algorithm. Various scenarios of different weightings and hydropower development targets are tested and compared. The results illustrate the capabilities of the tool to identify promising hydropower development strategies and to aid public policy discussions aimed at establishing incentives and regulations, and therefore provide decision makers with supporting material allowing a more informed discussion.

A computer tool to support in design of industrial Ethernet.

PubMed

Lugli, Alexandre Baratella; Santos, Max Mauro Dias; Franco, Lucia Regina Horta Rodrigues

2009-04-01

This paper presents a computer tool to support in the project and development of an industrial Ethernet network, verifying the physical layer (cables-resistance and capacitance, scan time, network power supply-POE's concept "Power Over Ethernet" and wireless), and occupation rate (amount of information transmitted to the network versus the controller network scan time). These functions are accomplished without a single physical element installed in the network, using only simulation. The computer tool has a software that presents a detailed vision of the network to the user, besides showing some possible problems in the network, and having an extremely friendly environment.

Applications of AN OO Methodology and Case to a Daq System

NASA Astrophysics Data System (ADS)

Bee, C. P.; Eshghi, S.; Jones, R.; Kolos, S.; Magherini, C.; Maidantchik, C.; Mapelli, L.; Mornacchi, G.; Niculescu, M.; Patel, A.; Prigent, D.; Spiwoks, R.; Soloviev, I.; Caprini, M.; Duval, P. Y.; Etienne, F.; Ferrato, D.; Le van Suu, A.; Qian, Z.; Gaponenko, I.; Merzliakov, Y.; Ambrosini, G.; Ferrari, R.; Fumagalli, G.; Polesello, G.

The RD13 project has evaluated the use of the Object Oriented Information Engineering (OOIE) method during the development of several software components connected to the DAQ system. The method is supported by a sophisticated commercial CASE tool (Object Management Workbench) and programming environment (Kappa) which covers the full life-cycle of the software including model simulation, code generation and application deployment. This paper gives an overview of the method, CASE tool, DAQ components which have been developed and we relate our experiences with the method and tool, its integration into our development environment and the spiral lifecycle it supports.

Plots, Calculations and Graphics Tools (PCG2). Software Transfer Request Presentation

NASA Technical Reports Server (NTRS)

Richardson, Marilou R.

2010-01-01

This slide presentation reviews the development of the Plots, Calculations and Graphics Tools (PCG2) system. PCG2 is an easy to use tool that provides a single user interface to view data in a pictorial, tabular or graphical format. It allows the user to view the same display and data in the Control Room, engineering office area, or remote sites. PCG2 supports extensive and regular engineering needs that are both planned and unplanned and it supports the ability to compare, contrast and perform ad hoc data mining over the entire domain of a program's test data.

Evaluation tools to support ITS planning process : development of a sketch planning tool in FSUTMS/cube environment.

DOT National Transportation Integrated Search

2008-12-15

Intelligent Transportation Systems (ITS) planning requires the use of tools to assess the performance of ITS deployment alternatives relative to each other and to other types of transportation system improvement alternatives. This research project in...

Implementation of TAMSIM and EROW right-of-way acquisition decision - support tools.

DOT National Transportation Integrated Search

2011-04-01

An implementation project was performed to initiate use of TAMSIM and EROW tools in region offices and : the Right of Way (ROW) Division. The research team worked with Texas Department of Transportation : regional ROW staffs to apply both tools to a ...

Whole Watershed Restoration Planning Tools for Estimating Tradeoffs Among Multiple Objectives

EPA Science Inventory

We developed a set of decision support tools to assist whole watershed restoration planning in the Pacific Northwest. Here we describe how these tools are being integrated and applied in collaboration with tribes and community stakeholders to address restoration of hydrological ...

Toolkit of Available EPA Green Infrastructure Modeling ...

EPA Pesticide Factsheets

This webinar will present a toolkit consisting of five EPA green infrastructure models and tools, along with communication material. This toolkit can be used as a teaching and quick reference resource for use by planners and developers when making green infrastructure implementation decisions. It can also be used for low impact development design competitions. Models and tools included: Green Infrastructure Wizard (GIWiz), Watershed Management Optimization Support Tool (WMOST), Visualizing Ecosystem Land Management Assessments (VELMA) Model, Storm Water Management Model (SWMM), and the National Stormwater Calculator (SWC). This webinar will present a toolkit consisting of five EPA green infrastructure models and tools, along with communication material. This toolkit can be used as a teaching and quick reference resource for use by planners and developers when making green infrastructure implementation decisions. It can also be used for low impact development design competitions. Models and tools included: Green Infrastructure Wizard (GIWiz), Watershed Management Optimization Support Tool (WMOST), Visualizing Ecosystem Land Management Assessments (VELMA) Model, Storm Water Management Model (SWMM), and the National Stormwater Calculator (SWC).

Implementing Lumberjacks and Black Swans Into Model-Based Tools to Support Human-Automation Interaction.

PubMed

Sebok, Angelia; Wickens, Christopher D

2017-03-01

The objectives were to (a) implement theoretical perspectives regarding human-automation interaction (HAI) into model-based tools to assist designers in developing systems that support effective performance and (b) conduct validations to assess the ability of the models to predict operator performance. Two key concepts in HAI, the lumberjack analogy and black swan events, have been studied extensively. The lumberjack analogy describes the effects of imperfect automation on operator performance. In routine operations, an increased degree of automation supports performance, but in failure conditions, increased automation results in more significantly impaired performance. Black swans are the rare and unexpected failures of imperfect automation. The lumberjack analogy and black swan concepts have been implemented into three model-based tools that predict operator performance in different systems. These tools include a flight management system, a remotely controlled robotic arm, and an environmental process control system. Each modeling effort included a corresponding validation. In one validation, the software tool was used to compare three flight management system designs, which were ranked in the same order as predicted by subject matter experts. The second validation compared model-predicted operator complacency with empirical performance in the same conditions. The third validation compared model-predicted and empirically determined time to detect and repair faults in four automation conditions. The three model-based tools offer useful ways to predict operator performance in complex systems. The three tools offer ways to predict the effects of different automation designs on operator performance.

Preservice Mathematics Teachers' Perceptions of Using a Web 2.0 Technology as a Supportive Teaching-Learning Tool in a College Euclidean Geometry Course

ERIC Educational Resources Information Center

Hossain, Md. Mokter

2012-01-01

This mixed methods study examined preservice secondary mathematics teachers' perceptions of a blogging activity used as a supportive teaching-learning tool in a college Euclidean Geometry course. The effect of a 12-week blogging activity that was a standard component of a college Euclidean Geometry course offered for preservice secondary…

Teachers' Opinion Survey on the Use of ICT Tools to Support Attendance-Based Teaching

ERIC Educational Resources Information Center

Castro Sanchez, Jose Juan; Aleman, Elena Chirino

2011-01-01

The present paper reports on the results obtained from a teachers' opinion survey on the use of ICT tools to support of attendance-based teaching. In order to carry out this study, it was necessary to design a questionnaire to collect data among all in-service teachers with access to the university virtual campus. The findings show that…

DECISION SUPPORT FOR REVITALIZATION PRACTITIONERS: SUSTAINABLE MANAGEMENT APPROACHES AND REVITALIZATION TOOLS-ELECTRONIC (SMARTE-TRAINING FOR OH EPA - APRIL 13, 2006

EPA Science Inventory

SMARTe (Sustainable Management Approaches and Revitalization Tools-electronic) is a web-based decision support tool being developed by the Office of Research and Development (ORD) in partnership with the Office of Brownfields Cleanup and ...

Test Review for Preschool-Wide Evaluation Tool (PreSET) Manual: Assessing Universal Program-Wide Positive Behavior Support in Early Childhood

ERIC Educational Resources Information Center

Rodriguez, Billie Jo

2013-01-01

The Preschool-Wide Evaluation Tool (PreSET; Steed & Pomerleau, 2012) is published by Paul H. Brookes Publishing Company in Baltimore, MD. The PreSET purports to measure universal and program-wide features of early childhood programs' implementation fidelity of program-wide positive behavior intervention and support (PW-PBIS) and is,…

Defense Logistics Agency Green Products / Hazardous Minimization Warfighter Team: Helping the Warfighter Become Green!

DTIC Science & Technology

2010-06-01

Online Shopping Tool • Web self-service capability for the DOD • Sells both finished goods and services • Supports contracts written by DLA, GSA...month and over 750K items of content a month • FY08 Total Sales $835M; Green Sales $7.3M 11 DOD EMALL DOD’s Online Shopping Tool 1st Choice Support for

Introduction to the enhanced logistics intratheater support tool (ELIST) mission application and its segments : global data segment version 8.1.0.0, database instance segment version 8.1.0.0, database fill segment version 8.1.0.0, database segment versio

DOT National Transportation Integrated Search

2002-02-26

This document, the Introduction to the Enhanced Logistics Intratheater Support Tool (ELIST) Mission Application and its Segments, satisfies the following objectives: : It identifies the mission application, known in brief as ELIST, and all seven ...

Friction Stir Weld Tools

NASA Technical Reports Server (NTRS)

Carter, Robert W. (Inventor); Payton, Lewis N. (Inventor)

2007-01-01

A friction stir weld tool sleeve is supported by an underlying support pin. The pin material is preferably selected for toughness and fracture characteristics. The pin sleeve preferably has a geometry which employs the use of an interrupted thread, a plurality of flutes and/or eccentric path to provide greater flow through. Paddles have been found to assist in imparting friction and directing plastic metal during the welding process.

Friction stir weld tools

NASA Technical Reports Server (NTRS)

Carter, Robert W. (Inventor); Payton, Lewis N. (Inventor)

2007-01-01

A friction stir weld tool sleeve is supported by an underlying support pin. The pin material is preferably selected for toughness and fracture characteristics. The pin sleeve preferably has a geometry which employs the use of an interrupted thread, a plurality of flutes and/or eccentric path to provide greater flow through. Paddles have been found to assist in imparting friction and directing plastic metal during the welding process.

NASA Research to Support the Airlines

NASA Technical Reports Server (NTRS)

Mogford, Richard

2016-01-01

This is a PowerPoint presentation that was a review of NASA projects that support airline operations. It covered NASA tasks that have provided new tools to the airline operations center and flight deck including the Flight Awareness Collaboration Tool, Dynamic Weather Routes, Traffic Aware Strategic Aircrew Requests, and Airplane State Awareness and Prediction Technologies. This material is very similar to other previously approved presentations with the same title.

Evaluating a computer aid for assessing stomach symptoms (ECASS): study protocol for a randomised controlled trial.

PubMed

Moore, Helen J; Nixon, Catherine; Tariq, Anisah; Emery, Jon; Hamilton, Willie; Hoare, Zoë; Kershenbaum, Anne; Neal, Richard D; Ukoumunne, Obioha C; Usher-Smith, Juliet; Walter, Fiona M; Whyte, Sophie; Rubin, Greg

2016-04-04

For most cancers, only a minority of patients have symptoms meeting the National Institute for Health and Clinical Excellence guidance for urgent referral. For gastro-oesophageal cancers, the 'alarm' symptoms of dysphagia and weight loss are reported by only 32 and 8 % of patients, respectively, and their presence correlates with advanced-stage disease. Electronic clinical decision-support tools that integrate with clinical computer systems have been developed for general practice, although uncertainty remains concerning their effectiveness. The objectives of this trial are to optimise the intervention and establish the acceptability of both the intervention and randomisation, confirm the suitability and selection of outcome measures, finalise the design for the phase III definitive trial, and obtain preliminary estimates of the intervention effect. This is a two-arm, multi-centre, cluster-randomised, controlled phase II trial design, which will extend over a 16-month period, across 60 general practices within the North East and North Cumbria and the Eastern Local Clinical Research Network areas. Practices will be randomised to receive either the intervention (the electronic clinical decision-support tool) or to act as a control (usual care). From these practices, we will recruit 3000 adults who meet the trial eligibility criteria and present to their GP with symptoms suggestive of gastro-oesophageal cancer. The main measures are the process data, which include the practitioner outcomes, service outcomes, diagnostic intervals, health economic outcomes, and patient outcomes. One-on-one interviews in a sub-sample of 30 patient-GP dyads will be undertaken to understand the impact of the use or non-use of the electronic clinical decision-support tool in the consultation. A further 10-15 GPs will be interviewed to identify and gain an understanding of the facilitators and constraints influencing implementation of the electronic clinical decision-support tool in practice. We aim to generate new knowledge on the process measures regarding the use of electronic clinical decision-support tools in primary care in general and to inform a subsequent definitive phase III trial. Preliminary data on the impact of the support tool on resource utilisation and health care costs will also be collected. ISRCTN Registry, ISRCTN12595588 .

Beyond information access: Support for complex cognitive activities in public health informatics tools.

PubMed

Sedig, Kamran; Parsons, Paul; Dittmer, Mark; Ola, Oluwakemi

2012-01-01

Public health professionals work with a variety of information sources to carry out their everyday activities. In recent years, interactive computational tools have become deeply embedded in such activities. Unlike the early days of computational tool use, the potential of tools nowadays is not limited to simply providing access to information; rather, they can act as powerful mediators of human-information discourse, enabling rich interaction with public health information. If public health informatics tools are designed and used properly, they can facilitate, enhance, and support the performance of complex cognitive activities that are essential to public health informatics, such as problem solving, forecasting, sense-making, and planning. However, the effective design and evaluation of public health informatics tools requires an understanding of the cognitive and perceptual issues pertaining to how humans work and think with information to perform such activities. This paper draws on research that has examined some of the relevant issues, including interaction design, complex cognition, and visual representations, to offer some human-centered design and evaluation considerations for public health informatics tools.

Web-based Tool Suite for Plasmasphere Information Discovery

NASA Astrophysics Data System (ADS)

Newman, T. S.; Wang, C.; Gallagher, D. L.

2005-12-01

A suite of tools that enable discovery of terrestrial plasmasphere characteristics from NASA IMAGE Extreme Ultra Violet (EUV) images is described. The tool suite is web-accessible, allowing easy remote access without the need for any software installation on the user's computer. The features supported by the tool include reconstruction of the plasmasphere plasma density distribution from a short sequence of EUV images, semi-automated selection of the plasmapause boundary in an EUV image, and mapping of the selected boundary to the geomagnetic equatorial plane. EUV image upload and result download is also supported. The tool suite's plasmapause mapping feature is achieved via the Roelof and Skinner (2000) Edge Algorithm. The plasma density reconstruction is achieved through a tomographic technique that exploits physical constraints to allow for a moderate resolution result. The tool suite's software architecture uses Java Server Pages (JSP) and Java Applets on the front side for user-software interaction and Java Servlets on the server side for task execution. The compute-intensive components of the tool suite are implemented in C++ and invoked by the server via Java Native Interface (JNI).

The Registry of Knowledge Translation Methods and Tools: a resource to support evidence-informed public health.

PubMed

Peirson, Leslea; Catallo, Cristina; Chera, Sunita

2013-08-01

This paper examines the development of a globally accessible online Registry of Knowledge Translation Methods and Tools to support evidence-informed public health. A search strategy, screening and data extraction tools, and writing template were developed to find, assess, and summarize relevant methods and tools. An interactive website and searchable database were designed to house the registry. Formative evaluation was undertaken to inform refinements. Over 43,000 citations were screened; almost 700 were full-text reviewed, 140 of which were included. By November 2012, 133 summaries were available. Between January 1 and November 30, 2012 over 32,945 visitors from more than 190 countries accessed the registry. Results from 286 surveys and 19 interviews indicated the registry is valued and useful, but would benefit from a more intuitive indexing system and refinements to the summaries. User stories and promotional activities help expand the reach and uptake of knowledge translation methods and tools in public health contexts. The National Collaborating Centre for Methods and Tools' Registry of Methods and Tools is a unique and practical resource for public health decision makers worldwide.

An Intelligent Crop Planning Tool for Controlled Ecological Life Support Systems

NASA Technical Reports Server (NTRS)

Whitaker, Laura O.; Leon, Jorge

1996-01-01

This paper describes a crop planning tool developed for the Controlled Ecological Life Support Systems (CELSS) project which is in the research phases at various NASA facilities. The Crop Planning Tool was developed to assist in the understanding of the long term applications of a CELSS environment. The tool consists of a crop schedule generator as well as a crop schedule simulator. The importance of crop planning tools such as the one developed is discussed. The simulator is outlined in detail while the schedule generator is touched upon briefly. The simulator consists of data inputs, plant and human models, and various other CELSS activity models such as food consumption and waste regeneration. The program inputs such as crew data and crop states are discussed. References are included for all nominal parameters used. Activities including harvesting, planting, plant respiration, and human respiration are discussed using mathematical models. Plans provided to the simulator by the plan generator are evaluated for their 'fitness' to the CELSS environment with an objective function based upon daily reservoir levels. Sample runs of the Crop Planning Tool and future needs for the tool are detailed.

Knowledge management: An abstraction of knowledge base and database management systems

NASA Technical Reports Server (NTRS)

Riedesel, Joel D.

1990-01-01

Artificial intelligence application requirements demand powerful representation capabilities as well as efficiency for real-time domains. Many tools exist, the most prevalent being expert systems tools such as ART, KEE, OPS5, and CLIPS. Other tools just emerging from the research environment are truth maintenance systems for representing non-monotonic knowledge, constraint systems, object oriented programming, and qualitative reasoning. Unfortunately, as many knowledge engineers have experienced, simply applying a tool to an application requires a large amount of effort to bend the application to fit. Much work goes into supporting work to make the tool integrate effectively. A Knowledge Management Design System (KNOMAD), is described which is a collection of tools built in layers. The layered architecture provides two major benefits; the ability to flexibly apply only those tools that are necessary for an application, and the ability to keep overhead, and thus inefficiency, to a minimum. KNOMAD is designed to manage many knowledge bases in a distributed environment providing maximum flexibility and expressivity to the knowledge engineer while also providing support for efficiency.

Drinking Water Consequences Tools. A Literature Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasqualini, Donatella

2016-05-12

In support of the goals of Department of Homeland Security’s (DHS) National Protection and Programs Directorate and the Federal Emergency Management Agency, the DHS Office of Science and Technology is seeking to develop and/or modify consequence assessment tools to enable drinking water systems owner/operators to estimate the societal and economic consequences of drinking water disruption due to the threats and hazards. This work will expand the breadth of consequence estimation methods and tools using the best-available data describing water distribution infrastructure, owner/assetlevel economic losses, regional-scale economic activity, and health. In addition, this project will deploy the consequence methodology and capabilitymore » within a Web-based platform. This report is intended to support DHS effort providing a review literature review of existing assessment tools of water and wastewater systems consequences to disruptions. The review includes tools that assess water systems resilience, vulnerability, and risk. This will help to understand gaps and limitations of these tools in order to plan for the development of the next-generation consequences tool for water and waste water systems disruption.« less

Spectacle and SpecViz: New Spectral Analysis and Visualization Tools

NASA Astrophysics Data System (ADS)

Earl, Nicholas; Peeples, Molly; JDADF Developers

2018-01-01

A new era of spectroscopic exploration of our universe is being ushered in with advances in instrumentation and next-generation space telescopes. The advent of new spectroscopic instruments has highlighted a pressing need for tools scientists can use to analyze and explore these new data. We have developed Spectacle, a software package for analyzing both synthetic spectra from hydrodynamic simulations as well as real COS data with an aim of characterizing the behavior of the circumgalactic medium. It allows easy reduction of spectral data and analytic line generation capabilities. Currently, the package is focused on automatic determination of absorption regions and line identification with custom line list support, simultaneous line fitting using Voigt profiles via least-squares or MCMC methods, and multi-component modeling of blended features. Non-parametric measurements, such as equivalent widths, delta v90, and full-width half-max are available. Spectacle also provides the ability to compose compound models used to generate synthetic spectra allowing the user to define various LSF kernels, uncertainties, and to specify sampling.We also present updates to the visualization tool SpecViz, developed in conjunction with the JWST data analysis tools development team, to aid in the exploration of spectral data. SpecViz is an open source, Python-based spectral 1-D interactive visualization and analysis application built around high-performance interactive plotting. It supports handling general and instrument-specific data and includes advanced tool-sets for filtering and detrending one-dimensional data, along with the ability to isolate absorption regions using slicing and manipulate spectral features via spectral arithmetic. Multi-component modeling is also possible using a flexible model fitting tool-set that supports custom models to be used with various fitting routines. It also features robust user extensions such as custom data loaders and support for user-created plugins that add new functionality.This work was supported in part by HST AR #13919, HST GO #14268, and HST AR #14560.

Marshall Space Flight Center's Virtual Reality Applications Program 1993

NASA Technical Reports Server (NTRS)

Hale, Joseph P., II

1993-01-01

A Virtual Reality (VR) applications program has been under development at the Marshall Space Flight Center (MSFC) since 1989. Other NASA Centers, most notably Ames Research Center (ARC), have contributed to the development of the VR enabling technologies and VR systems. This VR technology development has now reached a level of maturity where specific applications of VR as a tool can be considered. The objectives of the MSFC VR Applications Program are to develop, validate, and utilize VR as a Human Factors design and operations analysis tool and to assess and evaluate VR as a tool in other applications (e.g., training, operations development, mission support, teleoperations planning, etc.). The long-term goals of this technology program is to enable specialized Human Factors analyses earlier in the hardware and operations development process and develop more effective training and mission support systems. The capability to perform specialized Human Factors analyses earlier in the hardware and operations development process is required to better refine and validate requirements during the requirements definition phase. This leads to a more efficient design process where perturbations caused by late-occurring requirements changes are minimized. A validated set of VR analytical tools must be developed to enable a more efficient process for the design and development of space systems and operations. Similarly, training and mission support systems must exploit state-of-the-art computer-based technologies to maximize training effectiveness and enhance mission support. The approach of the VR Applications Program is to develop and validate appropriate virtual environments and associated object kinematic and behavior attributes for specific classes of applications. These application-specific environments and associated simulations will be validated, where possible, through empirical comparisons with existing, accepted tools and methodologies. These validated VR analytical tools will then be available for use in the design and development of space systems and operations and in training and mission support systems.

Development of a patient decision aid for people with refractory angina: protocol for a three-phase pilot study

PubMed Central

2014-01-01

Background Refractory angina is a severe chronic disease, defined as angina which cannot be controlled by usual treatments for heart disease. This disease is frightening, debilitating, and difficult to manage. Many people suffering refractory have inadequate pain relief, continually revisit emergency departments for help, undergo repeated cardiac investigations, and struggle with obtaining appropriate care. There is no clear framework to help people understand the risks and benefits of available treatment options in Canada. Some treatments for refractory angina are invasive, while others are not covered by provincial health insurance plans. Effective care for refractory angina sufferers in Canada is critically underdeveloped; it is important that healthcare professionals and refractory angina sufferers alike understand the treatment options and their implications. This proposal builds on the recent Canadian practice guidelines for the management of refractory angina. We propose to develop a decision support tool in order to help people suffering from refractory angina make well-informed decisions about their healthcare and reduce their uncertainty about treatment options. Methods This project will be conducted in three phases: a) development of the support tool with input from clinical experts, the Canadian refractory angina guidelines, and people living with refractory angina, b) pilot testing of the usability of the tool, and c) formal preliminary evaluation of the effectiveness of the support tool to help people make informed decisions about treatment options. Discussion A decision support tool for refractory angina is needed and the available data suggest that by developing such a tool, we may be able to help refractory angina sufferers better understand their condition and the effectiveness of available treatment options (in their respective clinical settings) as well as their implications (e.g. risks vs. benefits). By virtue of this tool, we may also be able to facilitate identification and inclusion of patients’ values and preferences in the decision making process. This is particularly important as refractory angina is an intractable condition, necessitating that the selected course of treatment be lifelong. This study will yield a much needed patient decision aid for people living with refractory angina and pilot data to support a subsequent effectiveness study. PMID:24920518

Decision support tool for diagnosing the source of variation

NASA Astrophysics Data System (ADS)

Masood, Ibrahim; Azrul Azhad Haizan, Mohamad; Norbaya Jumali, Siti; Ghazali, Farah Najihah Mohd; Razali, Hazlin Syafinaz Md; Shahir Yahya, Mohd; Azlan, Mohd Azwir bin

2017-08-01

Identifying the source of unnatural variation (SOV) in manufacturing process is essential for quality control. The Shewhart control chart patterns (CCPs) are commonly used to monitor the SOV. However, a proper interpretation of CCPs associated to its SOV requires a high skill industrial practitioner. Lack of knowledge in process engineering will lead to erroneous corrective action. The objective of this study is to design the operating procedures of computerized decision support tool (DST) for process diagnosis. The DST is an embedded tool in CCPs recognition scheme. Design methodology involves analysis of relationship between geometrical features, manufacturing process and CCPs. The DST contents information about CCPs and its possible root cause error and description on SOV phenomenon such as process deterioration in tool bluntness, offsetting tool, loading error, and changes in materials hardness. The DST will be useful for an industrial practitioner in making effective troubleshooting.

An audit of local government planning tools for their potential use in addressing community food and nutrition issues.

PubMed

Good, Elizabeth; Hammond, Melinda; Martin, Caroline; Burns, Catherine; Groos, Anita

2010-04-01

This project aimed to identify how local government planning tools could be used to influence physical and policy environments to support healthy eating behaviours in communities. An audit of Queensland's legislative and non-legislative local government planning tools was conducted by a public health nutritionist to assess their potential use in addressing strategies to achieve positive nutrition outcomes. Ten strategies were identified and covered the following themes: improving access to healthy foods and drinks; increasing access to breastfeeding facilities; decreasing fast food outlet density; and unhealthy food advertising. The audit found that all of the 10 strategies to achieve positive nutrition outcomes could be considered through three or more of the planning tools. Based on the findings of this audit, local government planning tools provide opportunities to address food and nutrition issues and contribute toward creating physical and policy environments that support healthy eating behaviours.

Validation of the Mobile Information Software Evaluation Tool (MISET) With Nursing Students.

PubMed

Secco, M Loretta; Furlong, Karen E; Doyle, Glynda; Bailey, Judy

2016-07-01

This study evaluated the Mobile Information Software Evaluation Tool (MISET) with a sample of Canadian undergraduate nursing students (N = 240). Psychometric analyses determined how well the MISET assessed the extent that nursing students find mobile device-based information resources useful and supportive of learning in the clinical and classroom settings. The MISET has a valid three-factor structure with high explained variance (74.7%). Internal consistency reliabilities were high for the MISET total (.90) and three subscales: Usefulness/Helpfulness, Information Literacy Support, and Use of Evidence-Based Sources (.87 to .94). Construct validity evidence included significantly higher mean total MISET, Helpfulness/Usefulness, and Information Literacy Support scores for senior students and those with higher computer competence. The MISET is a promising tool to evaluate mobile information technologies and information literacy support; however, longitudinal assessment of changes in scores over time would determine scale sensitivity and responsiveness. [J Nurs Educ. 2016;55(7):385-390.]. Copyright 2016, SLACK Incorporated.

Operating in "Strange New Worlds" and Measuring Success - Test and Evaluation in Complex Environments

NASA Technical Reports Server (NTRS)

Qualls, Garry; Cross, Charles; Mahlin, Matthew; Montague, Gilbert; Motter, Mark; Neilan, James; Rothhaar, Paul; Tran, Loc; Trujillo, Anna; Allen, B. Danette

2015-01-01

Software tools are being developed by the Autonomy Incubator at NASA's Langley Research Center that will provide an integrated and scalable capability to support research and non-research flight operations across several flight domains, including urban and mixed indoor-outdoor operations. These tools incorporate a full range of data products to support mission planning, approval, flight operations, and post-flight review. The system can support a number of different operational scenarios that can incorporate live and archived data streams for UAS operators, airspace regulators, and other important stakeholders. Example use cases are described that illustrate how the tools will benefit a variety of users in nominal and off-nominal operational scenarios. An overview is presented for the current state of the toolset, including a summary of current demonstrations that have been completed. Details of the final, fully operational capability are also presented, including the interfaces that will be supported to ensure compliance with existing and future airspace operations environments.

Tools for automating spacecraft ground systems: The Intelligent Command and Control (ICC) approach

NASA Technical Reports Server (NTRS)

Stoffel, A. William; Mclean, David

1996-01-01

The practical application of scripting languages and World Wide Web tools to the support of spacecraft ground system automation, is reported on. The mission activities and the automation tools used at the Goddard Space Flight Center (MD) are reviewed. The use of the Tool Command Language (TCL) and the Practical Extraction and Report Language (PERL) scripting tools for automating mission operations is discussed together with the application of different tools for the Compton Gamma Ray Observatory ground system.

SUPPORT Tools for evidence-informed health Policymaking (STP)

PubMed Central

2009-01-01

This article is the Introduction to a series written for people responsible for making decisions about health policies and programmes and for those who support these decision makers. Knowing how to find and use research evidence can help policymakers and those who support them to do their jobs better and more efficiently. Each article in this series presents a proposed tool that can be used by those involved in finding and using research evidence to support evidence-informed health policymaking. The series addresses four broad areas: 1. Supporting evidence-informed policymaking 2. Identifying needs for research evidence in relation to three steps in policymaking processes, namely problem clarification, options framing, and implementation planning 3. Finding and assessing both systematic reviews and other types of evidence to inform these steps, and 4. Going from research evidence to decisions. Each article begins with between one and three typical scenarios relating to the topic. These scenarios are designed to help readers decide on the level of detail relevant to them when applying the tools described. Most articles in this series are structured using a set of questions that guide readers through the proposed tools and show how to undertake activities to support evidence-informed policymaking efficiently and effectively. These activities include, for example, using research evidence to clarify problems, assessing the applicability of the findings of a systematic review about the effects of options selected to address problems, organising and using policy dialogues to support evidence-informed policymaking, and planning policy monitoring and evaluation. In several articles, the set of questions presented offers more general guidance on how to support evidence-informed policymaking. Additional information resources are listed and described in every article. The evaluation of ways to support evidence-informed health policymaking is a developing field and feedback about how to improve the series is welcome. PMID:20018098

Measuring workplace social support for workers with disability.

PubMed

Lysaght, Rosemary; Fabrigar, Leandre; Larmour-Trode, Sherrey; Stewart, Jeremy; Friesen, Margaret

2012-09-01

Social support in the workplace has been has been demonstrated to serve as a contributor to a worker's ability to manage work demands and to manage stress. Research in the area of disability management indicates that interpersonal factors play an important role in the success of return-to-work interventions. The role of workplace support has received limited attention in rehabilitation, despite the salience of support to the disability management process. Prior to this study, there existed no validated quantitative measure of social support for workers who re-enter the workplace following injury or disability. A support measure prototype, the Support for Workers with Disability Scale, was tested with 152 workers in accommodated work situations. Four validation tools were used to assess criterion validity. Factor analysis was used to validate the content structure and reduce the total number of response items. Additional analysis was conducted to determine the ability of the measure to discriminate between groups, and to provide insight into how social support operates in workplaces. Based on analysis, a reduced measure consisting of 41 items and measuring supervisor, co-worker, and non-work supports was created. Secondary analysis disclosed information concerning the nature of supports in the workplace. Higher levels of support were identified for workers with fewer work role limitations and for those with one versus multiple injury claims. This tool provides a validated outcome measure for research examining the social aspects of workplace disability. It can also serve as a quality management tool for human resource professionals engaged in continuous improvement of disability management programs.

The eHealth Enhanced Chronic Care Model: a theory derivation approach.

PubMed

Gee, Perry M; Greenwood, Deborah A; Paterniti, Debora A; Ward, Deborah; Miller, Lisa M Soederberg

2015-04-01

Chronic illnesses are significant to individuals and costly to society. When systematically implemented, the well-established and tested Chronic Care Model (CCM) is shown to improve health outcomes for people with chronic conditions. Since the development of the original CCM, tremendous information management, communication, and technology advancements have been established. An opportunity exists to improve the time-honored CCM with clinically efficacious eHealth tools. The first goal of this paper was to review research on eHealth tools that support self-management of chronic disease using the CCM. The second goal was to present a revised model, the eHealth Enhanced Chronic Care Model (eCCM), to show how eHealth tools can be used to increase efficiency of how patients manage their own chronic illnesses. Using Theory Derivation processes, we identified a "parent theory", the Chronic Care Model, and conducted a thorough review of the literature using CINAHL, Medline, OVID, EMBASE PsychINFO, Science Direct, as well as government reports, industry reports, legislation using search terms "CCM or Chronic Care Model" AND "eHealth" or the specific identified components of eHealth. Additionally, "Chronic Illness Self-management support" AND "Technology" AND several identified eHealth tools were also used as search terms. We then used a review of the literature and specific components of the CCM to create the eCCM. We identified 260 papers at the intersection of technology, chronic disease self-management support, the CCM, and eHealth and organized a high-quality subset (n=95) using the components of CCM, self-management support, delivery system design, clinical decision support, and clinical information systems. In general, results showed that eHealth tools make important contributions to chronic care and the CCM but that the model requires modification in several key areas. Specifically, (1) eHealth education is critical for self-care, (2) eHealth support needs to be placed within the context of community and enhanced with the benefits of the eCommunity or virtual communities, and (3) a complete feedback loop is needed to assure productive technology-based interactions between the patient and provider. The revised model, eCCM, offers insight into the role of eHealth tools in self-management support for people with chronic conditions. Additional research and testing of the eCCM are the logical next steps.

Perceived Breastfeeding Support Assessment Tool (PBSAT): development and testing of psychometric properties with Pakistani urban working mothers.

PubMed

Hirani, Shela Akbar Ali; Karmaliani, Rozina; Christie, Thomas; Parpio, Yasmin; Rafique, Ghazala

2013-06-01

breast feeding is an essential source of nutrition among young babies; however, in Pakistan a gradual decline in prevalence of breast feeding, especially among urban working mothers, has been reported. Previous studies among Pakistani urban working mothers have revealed that ensuring exclusivity and continuation of breast feeding is challenging if social and/or workplace environmental support is minimal or absent. This problem indicated a crucial need to assess availability of breast-feeding support for Pakistani urban working mothers by using a comprehensive, reliable, and validated tool in their national language (Urdu). to develop and test the psychometric properties of the 'Perceived Breastfeeding Support Assessment Tool' (PBSAT) that can gauge Pakistani urban working mothers' perceptions about breast-feeding support. this methodological research was undertaken in five phases. During phase I, a preliminary draft of the PBSAT was developed by using the Socio-ecological model, reviewing literature, and referring to two United States based tools. In Phase II, the instrument was evaluated by seven different experts, and, in Phase III, the instrument was revised, translated, and back translated. In Phase IV, the tool was pilot tested among 20 participants and then modified on the basis of statistical analysis. In Phase V, the refined instrument was tested on 200 breast-feeding working mothers recruited through purposive sampling from the government and private health-care settings in Karachi, Pakistan. Approvals were received from the Ethical Review Committees of the identified settings. the 29-item based PBSAT revealed an acceptable inter-rater reliability of 0.95, and an internal consistency reliability coefficient (Cronbach's alpha) of 0.85. A construct validity assessment through Exploratory Factor Analysis revealed that the PBSAT has two dimensions, 'workplace environmental support' (12 items; α=0.86) and 'social environmental support' (17 items; α=0.77). the study developed a 29-item based two-dimensional tool (in Urdu) that has acceptable psychometric properties. The PBSAT is context specific, comprehensive, and user-friendly, so it can be administered by health-care workers, employers, policy makers, and researchers to improve the quality of services of breast-feeding urban working mothers, and could ultimately improve child health in Pakistan. Copyright © 2012 Elsevier Ltd. All rights reserved.

Development of a web-based toolkit to support improvement of care coordination in primary care.

PubMed

Ganz, David A; Barnard, Jenny M; Smith, Nina Z Y; Miake-Lye, Isomi M; Delevan, Deborah M; Simon, Alissa; Rose, Danielle E; Stockdale, Susan E; Chang, Evelyn T; Noël, Polly H; Finley, Erin P; Lee, Martin L; Zulman, Donna M; Cordasco, Kristina M; Rubenstein, Lisa V

2018-05-23

Promising practices for the coordination of chronic care exist, but how to select and share these practices to support quality improvement within a healthcare system is uncertain. This study describes an approach for selecting high-quality tools for an online care coordination toolkit to be used in Veterans Health Administration (VA) primary care practices. We evaluated tools in three steps: (1) an initial screening to identify tools relevant to care coordination in VA primary care, (2) a two-clinician expert review process assessing tool characteristics (e.g. frequency of problem addressed, linkage to patients' experience of care, effect on practice workflow, and sustainability with existing resources) and assigning each tool a summary rating, and (3) semi-structured interviews with VA patients and frontline clinicians and staff. Of 300 potentially relevant tools identified by searching online resources, 65, 38, and 18 remained after steps one, two and three, respectively. The 18 tools cover five topics: managing referrals to specialty care, medication management, patient after-visit summary, patient activation materials, agenda setting, patient pre-visit packet, and provider contact information for patients. The final toolkit provides access to the 18 tools, as well as detailed information about tools' expected benefits, and resources required for tool implementation. Future care coordination efforts can benefit from systematically reviewing available tools to identify those that are high quality and relevant.

Parameter selection for and implementation of a web-based decision-support tool to predict extubation outcome in premature infants.

PubMed

Mueller, Martina; Wagner, Carol L; Annibale, David J; Knapp, Rebecca G; Hulsey, Thomas C; Almeida, Jonas S

2006-03-01

Approximately 30% of intubated preterm infants with respiratory distress syndrome (RDS) will fail attempted extubation, requiring reintubation and mechanical ventilation. Although ventilator technology and monitoring of premature infants have improved over time, optimal extubation remains challenging. Furthermore, extubation decisions for premature infants require complex informational processing, techniques implicitly learned through clinical practice. Computer-aided decision-support tools would benefit inexperienced clinicians, especially during peak neonatal intensive care unit (NICU) census. A five-step procedure was developed to identify predictive variables. Clinical expert (CE) thought processes comprised one model. Variables from that model were used to develop two mathematical models for the decision-support tool: an artificial neural network (ANN) and a multivariate logistic regression model (MLR). The ranking of the variables in the three models was compared using the Wilcoxon Signed Rank Test. The best performing model was used in a web-based decision-support tool with a user interface implemented in Hypertext Markup Language (HTML) and the mathematical model employing the ANN. CEs identified 51 potentially predictive variables for extubation decisions for an infant on mechanical ventilation. Comparisons of the three models showed a significant difference between the ANN and the CE (p = 0.0006). Of the original 51 potentially predictive variables, the 13 most predictive variables were used to develop an ANN as a web-based decision-tool. The ANN processes user-provided data and returns the prediction 0-1 score and a novelty index. The user then selects the most appropriate threshold for categorizing the prediction as a success or failure. Furthermore, the novelty index, indicating the similarity of the test case to the training case, allows the user to assess the confidence level of the prediction with regard to how much the new data differ from the data originally used for the development of the prediction tool. State-of-the-art, machine-learning methods can be employed for the development of sophisticated tools to aid clinicians' decisions. We identified numerous variables considered relevant for extubation decisions for mechanically ventilated premature infants with RDS. We then developed a web-based decision-support tool for clinicians which can be made widely available and potentially improve patient care world wide.

How Much Professional Development Is Enough? Meeting the Needs of Independent Music Teachers Learning to Use a Digital Tool

ERIC Educational Resources Information Center

Upitis, Rena; Brook, Julia

2017-01-01

Even though there are demonstrated benefits of using online tools to support student musicians, there is a persistent challenge of providing sufficient and effective professional development for independent music teachers to use such tools successfully. This paper describes several methods for helping teachers use an online tool called iSCORE,…

Tools to support evidence-informed public health decision making.

PubMed

Yost, Jennifer; Dobbins, Maureen; Traynor, Robyn; DeCorby, Kara; Workentine, Stephanie; Greco, Lori

2014-07-18

Public health professionals are increasingly expected to engage in evidence-informed decision making to inform practice and policy decisions. Evidence-informed decision making involves the use of research evidence along with expertise, existing public health resources, knowledge about community health issues, the local context and community, and the political climate. The National Collaborating Centre for Methods and Tools has identified a seven step process for evidence-informed decision making. Tools have been developed to support public health professionals as they work through each of these steps. This paper provides an overview of tools used in three Canadian public health departments involved in a study to develop capacity for evidence-informed decision making. As part of a knowledge translation and exchange intervention, a Knowledge Broker worked with public health professionals to identify and apply tools for use with each of the steps of evidence-informed decision making. The Knowledge Broker maintained a reflective journal and interviews were conducted with a purposive sample of decision makers and public health professionals. This paper presents qualitative analysis of the perceived usefulness and usability of the tools. Tools were used in the health departments to assist in: question identification and clarification; searching for the best available research evidence; assessing the research evidence for quality through critical appraisal; deciphering the 'actionable message(s)' from the research evidence; tailoring messages to the local context to ensure their relevance and suitability; deciding whether and planning how to implement research evidence in the local context; and evaluating the effectiveness of implementation efforts. Decision makers provided descriptions of how the tools were used within the health departments and made suggestions for improvement. Overall, the tools were perceived as valuable for advancing and sustaining evidence-informed decision making. Tools are available to support the process of evidence-informed decision making among public health professionals. The usability and usefulness of these tools for advancing and sustaining evidence-informed decision making are discussed, including recommendations for the tools' application in other public health settings beyond this study. Knowledge and awareness of these tools may assist other health professionals in their efforts to implement evidence-informed practice.

Patient-Centered Tools for Medication Information Search

PubMed Central

Wilcox, Lauren; Feiner, Steven; Elhadad, Noémie; Vawdrey, David; Tran, Tran H.

2016-01-01

Recent research focused on online health information seeking highlights a heavy reliance on general-purpose search engines. However, current general-purpose search interfaces do not necessarily provide adequate support for non-experts in identifying suitable sources of health information. Popular search engines have recently introduced search tools in their user interfaces for a range of topics. In this work, we explore how such tools can support non-expert, patient-centered health information search. Scoping the current work to medication-related search, we report on findings from a formative study focused on the design of patient-centered, medication-information search tools. Our study included qualitative interviews with patients, family members, and domain experts, as well as observations of their use of Remedy, a technology probe embodying a set of search tools. Post-operative cardiothoracic surgery patients and their visiting family members used the tools to find information about their hospital medications and were interviewed before and after their use. Domain experts conducted similar search tasks and provided qualitative feedback on their preferences and recommendations for designing these tools. Findings from our study suggest the importance of four valuation principles underlying our tools: credibility, readability, consumer perspective, and topical relevance. PMID:28163972

Patient-Centered Tools for Medication Information Search.

PubMed

Wilcox, Lauren; Feiner, Steven; Elhadad, Noémie; Vawdrey, David; Tran, Tran H

2014-05-20

Recent research focused on online health information seeking highlights a heavy reliance on general-purpose search engines. However, current general-purpose search interfaces do not necessarily provide adequate support for non-experts in identifying suitable sources of health information. Popular search engines have recently introduced search tools in their user interfaces for a range of topics. In this work, we explore how such tools can support non-expert, patient-centered health information search. Scoping the current work to medication-related search, we report on findings from a formative study focused on the design of patient-centered, medication-information search tools. Our study included qualitative interviews with patients, family members, and domain experts, as well as observations of their use of Remedy, a technology probe embodying a set of search tools. Post-operative cardiothoracic surgery patients and their visiting family members used the tools to find information about their hospital medications and were interviewed before and after their use. Domain experts conducted similar search tasks and provided qualitative feedback on their preferences and recommendations for designing these tools. Findings from our study suggest the importance of four valuation principles underlying our tools: credibility, readability, consumer perspective, and topical relevance.

Terminology tools: state of the art and practical lessons.

PubMed

Cimino, J J

2001-01-01

As controlled medical terminologies evolve from simple code-name-hierarchy arrangements, into rich, knowledge-based ontologies of medical concepts, increased demands are placed on both the developers and users of the terminologies. In response, researchers have begun developing tools to address their needs. The aims of this article are to review previous work done to develop these tools and then to describe work done at Columbia University and New York Presbyterian Hospital (NYPH). Researchers working with the Systematized Nomenclature of Medicine (SNOMED), the Unified Medical Language System (UMLS), and NYPH's Medical Entities Dictionary (MED) have created a wide variety of terminology browsers, editors and servers to facilitate creation, maintenance and use of these terminologies. Although much work has been done, no generally available tools have yet emerged. Consensus on requirement for tool functions, especially terminology servers is emerging. Tools at NYPH have been used successfully to support the integration of clinical applications and the merger of health care institutions. Significant advancement has occurred over the past fifteen years in the development of sophisticated controlled terminologies and the tools to support them. The tool set at NYPH provides a case study to demonstrate one feasible architecture.

Using an ecosystem service decision support tool to support ridge to reef management: An example of sediment reduction in west Maui, Hawaii

NASA Astrophysics Data System (ADS)

Falinski, K. A.; Oleson, K.; Htun, H.; Kappel, C.; Lecky, J.; Rowe, C.; Selkoe, K.; White, C.

2016-12-01

Faced with anthropogenic stressors and declining coral reef states, managers concerned with restoration and resilience of coral reefs are increasingly recognizing the need to take a ridge-to-reef, ecosystem-based approach. An ecosystem services framing can help managers move towards these goals, helping to illustrate trade-offs and opportunities of management actions in terms of their impacts on society. We describe a research program building a spatial ecosystem services-based decision-support tool, and being applied to guide ridge-to-reef management in a NOAA priority site in West Maui. We use multiple modeling methods to link biophysical processes to ecosystem services and their spatial flows and social values in an integrating platform. Modeled services include water availability, sediment retention, nutrient retention and carbon sequestration on land. A coral reef ecosystem service model is under development to capture the linkages between terrestrial and coastal ecosystem services. Valuation studies are underway to quantify the implications for human well-being. The tool integrates techniques from decision science to facilitate decision making. We use the sediment retention model to illustrate the types of analyses the tool can support. The case study explores the tradeoffs between road rehabilitation costs and sediment export avoided. We couple the sediment and cost models with trade-off analysis to identify optimal distributed solutions that are most cost-effective in reducing erosion, and then use those models to estimate sediment exposure to coral reefs. We find that cooperation between land owners reveals opportunities for maximizing the benefits of fixing roads and minimizes costs. This research forms the building blocks of an ecosystem service decision support tool that we intend to continue to test and apply in other Pacific Island settings.

COUNCIL FOR REGULATORY ENVIRONMENTAL MODELING (CREM) PILOT WATER QUALITY MODEL SELECTION TOOL

EPA Science Inventory

EPA's Council for Regulatory Environmental Modeling (CREM) is currently supporting the development of a pilot model selection tool that is intended to help the states and the regions implement the total maximum daily load (TMDL) program. This tool will be implemented within the ...

BASINs and WEPP Climate Assessment Tools (CAT): Case Study Guide to Potential Applications (Final Report)

EPA Science Inventory

EPA announced the release of the final report, BASINs and WEPP Climate Assessment Tools (CAT): Case Study Guide to Potential Applications. This report supports application of two recently developed water modeling tools, the Better Assessment Science Integrating point & ...

Synthesis of research on work zone delays and simplified application of QuickZone analysis tool.

DOT National Transportation Integrated Search

2010-03-01

The objectives of this project were to synthesize the latest information on work zone safety and management and identify case studies in which FHWAs decision support tool QuickZone or other appropriate analysis tools could be applied. The results ...

FRAMEWORK FOR RESPONSIBLE DECISION-MAKING (FRED): A TOOL FOR ENVIRONMENTALLY PREFERABLE PRODUCTS

EPA Science Inventory

In support of the Environmentally Preferable Purchasing Program of the USEPA, a decision-making tool based on life cycle assessment has been developed. This tool, the Framework for Responsible Environmental Decision-making or FRED, streamlines LCA by choosing a minimum list of im...

FRAMEWORK FOR ENVIRONMENTAL DECISION-MAKING, FRED: A TOOL FOR ENVIRONMENTALLY-PREFERABLE PURCHASING

EPA Science Inventory

In support of the Environmentally Preferable Purchasing Program of the US EPA, the Systems Analysis Branch has developed a decision-making tool based on life cycle assessment. This tool, the Framework for Responsible Environmental Decision-making or FRED streamlines LCA by choosi...

Data and Tools | Transportation Research | NREL

Science.gov Websites

Projection Tool Lite Tool for projecting consumer demand for electric vehicle charging infrastructure at the technologies or for selecting a technology to invest in. Transportation-Related Consumer Preference Data Consumer preference data related to alternative fuel and advanced vehicle technologies to support the

Virtual Beach: Decision Support Tools for Beach Pathogen Prediction

EPA Science Inventory

The Virtual Beach Managers Tool (VB) is decision-making software developed to help local beach managers make decisions as to when beaches should be closed due to predicted high levels of water borne pathogens. The tool is being developed under the umbrella of EPA's Advanced Monit...

Hydrogen Financial Analysis Scenario Tool (H2FAST) Documentation

Science.gov Websites

for the web and spreadsheet versions of H2FAST. H2FAST Web Tool User's Manual H2FAST Spreadsheet Tool User's Manual (DRAFT) Technical Support Send questions or feedback about H2FAST to H2FAST@nrel.gov. Home

Residential Simulation Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Starke, Michael R; Abdelaziz, Omar A; Jackson, Rogerick K

Residential Simulation Tool was developed to understand the impact of residential load consumption on utilities including the role of demand response. This is complicated as many different residential loads exist and are utilized for different purposes. The tool models human behavior and contributes this to load utilization, which contributes to the electrical consumption prediction by the tool. The tool integrates a number of different databases from Department of Energy and other Government websites to support the load consumption prediction.

The STARTEC Decision Support Tool for Better Tradeoffs between Food Safety, Quality, Nutrition, and Costs in Production of Advanced Ready-to-Eat Foods.

PubMed

Skjerdal, Taran; Gefferth, Andras; Spajic, Miroslav; Estanga, Edurne Gaston; de Cecare, Alessandra; Vitali, Silvia; Pasquali, Frederique; Bovo, Federica; Manfreda, Gerardo; Mancusi, Rocco; Trevisiani, Marcello; Tessema, Girum Tadesse; Fagereng, Tone; Moen, Lena Haugland; Lyshaug, Lars; Koidis, Anastasios; Delgado-Pando, Gonzalo; Stratakos, Alexandros Ch; Boeri, Marco; From, Cecilie; Syed, Hyat; Muccioli, Mirko; Mulazzani, Roberto; Halbert, Catherine

2017-01-01

A prototype decision support IT-tool for the food industry was developed in the STARTEC project. Typical processes and decision steps were mapped using real life production scenarios of participating food companies manufacturing complex ready-to-eat foods. Companies looked for a more integrated approach when making food safety decisions that would align with existing HACCP systems. The tool was designed with shelf life assessments and data on safety, quality, and costs, using a pasta salad meal as a case product. The process flow chart was used as starting point, with simulation options at each process step. Key parameters like pH, water activity, costs of ingredients and salaries, and default models for calculations of Listeria monocytogenes , quality scores, and vitamin C, were placed in an interactive database. Customization of the models and settings was possible on the user-interface. The simulation module outputs were provided as detailed curves or categorized as "good"; "sufficient"; or "corrective action needed" based on threshold limit values set by the user. Possible corrective actions were suggested by the system. The tool was tested and approved by end-users based on selected ready-to-eat food products. Compared to other decision support tools, the STARTEC-tool is product-specific and multidisciplinary and includes interpretation and targeted recommendations for end-users.

The STARTEC Decision Support Tool for Better Tradeoffs between Food Safety, Quality, Nutrition, and Costs in Production of Advanced Ready-to-Eat Foods

PubMed Central

Gefferth, Andras; Spajic, Miroslav; Estanga, Edurne Gaston; Vitali, Silvia; Pasquali, Frederique; Bovo, Federica; Manfreda, Gerardo; Mancusi, Rocco; Tessema, Girum Tadesse; Fagereng, Tone; Moen, Lena Haugland; Lyshaug, Lars; Koidis, Anastasios; Delgado-Pando, Gonzalo; Stratakos, Alexandros Ch.; Boeri, Marco; From, Cecilie; Syed, Hyat; Muccioli, Mirko; Mulazzani, Roberto; Halbert, Catherine

2017-01-01

A prototype decision support IT-tool for the food industry was developed in the STARTEC project. Typical processes and decision steps were mapped using real life production scenarios of participating food companies manufacturing complex ready-to-eat foods. Companies looked for a more integrated approach when making food safety decisions that would align with existing HACCP systems. The tool was designed with shelf life assessments and data on safety, quality, and costs, using a pasta salad meal as a case product. The process flow chart was used as starting point, with simulation options at each process step. Key parameters like pH, water activity, costs of ingredients and salaries, and default models for calculations of Listeria monocytogenes, quality scores, and vitamin C, were placed in an interactive database. Customization of the models and settings was possible on the user-interface. The simulation module outputs were provided as detailed curves or categorized as “good”; “sufficient”; or “corrective action needed” based on threshold limit values set by the user. Possible corrective actions were suggested by the system. The tool was tested and approved by end-users based on selected ready-to-eat food products. Compared to other decision support tools, the STARTEC-tool is product-specific and multidisciplinary and includes interpretation and targeted recommendations for end-users. PMID:29457031

Pilot study of digital tools to support multimodal hand hygiene in a clinical setting.

PubMed

Thirkell, Gary; Chambers, Joanne; Gilbart, Wayne; Thornhill, Kerrill; Arbogast, James; Lacey, Gerard

2018-03-01

Digital tools for hand hygiene do not share data, limiting their potential to support multimodal programs. The Christie NHS Foundation Trust, United Kingdom, worked with GOJO (in the United States), MEG (in Ireland), and SureWash (in Ireland) to integrate their systems and pilot their combined use in a clinical setting. A 28-bed medical oncology unit piloted the system for 5 weeks. Live data from the tools were combined to create a novel combined risk status metric that was displayed publicly and via a management Web site. The combined risk status reduced over the pilot period. However, larger and longer duration studies are required to reach statistical significance. Staff and especially patient reaction was positive in that 70% of the hand hygiene training events were by patients. The digital tools did not negatively impact clinical workflow and received positive engagement from staff and patients. The combined risk status did not change significantly over the short pilot period because there was also no specific hand hygiene improvement campaign underway at the time of the pilot study. The results indicate that integrated digital tools can provide both rich data and novel tools that both measure impact and provide feedback to support the implementation of multimodal hand hygiene campaigns, reducing the need for significant additional personnel resources. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

Toward the Modularization of Decision Support Systems

NASA Astrophysics Data System (ADS)

Raskin, R. G.

2009-12-01

Decision support systems are typically developed entirely from scratch without the use of modular components. This “stovepiped” approach is inefficient and costly because it prevents a developer from leveraging the data, models, tools, and services of other developers. Even when a decision support component is made available, it is difficult to know what problem it solves, how it relates to other components, or even that the component exists, The Spatial Decision Support (SDS) Consortium was formed in 2008 to organize the body of knowledge in SDS within a common portal. The portal identifies the canonical steps in the decision process and enables decision support components to be registered, categorized, and searched. This presentation describes how a decision support system can be assembled from modular models, data, tools and services, based on the needs of the Earth science application.

Consumption value theory and the marketing of public health: an effective formative research tool.

PubMed

Nelson, Douglas G; Byus, Kent

2002-01-01

Contemporary public health requires the support and participation of its constituency. This study assesses the capacity of consumption value theory to identify the basis of this support. A telephone survey design used simple random sampling of adult residents of Cherokee County, Oklahoma. Factor analysis and stepwise discriminant analysis was used to identify and classify personal and societal level support variables. Most residents base societal level support on epistemic values. Direct services clientele base their support on positive emotional values derived from personal contact and attractive programs. Residents are curious about public health and want to know more about the health department. Where marketing the effectiveness of public health programs would yield relatively little support, marketing health promotion activities may attract public opposition. This formative research tool suggests a marketing strategy for public health practitioners.