Management of Civil Engineering Support Equipment

DTIC Science & Technology

2003-09-01

The standard Navy plates have blue lettering on a white reflective background (Shore) or black lettering on a non-reflective olive drab background...17038. 2-54 (b) On vehicles painted white, individual letters and numbers shall be the reflective type, conforming to Type I, Class 3, Blue ...manufacturer’s color. The word “Police” in 4-inch reflectorized blue letters of material conforming to ASTM D4956, Type III, Class 1 (encapsulated lens), shall

Tools for Implementing Science Practice in a Large Introductory Class

NASA Astrophysics Data System (ADS)

Prothero, W. A.

2008-12-01

Scientists must have in-depth background knowledge of their subject area and know where current knowledge can be advanced. They perform experiments that gather data to test new or existing theories, present their findings at meetings, publish their results, critically review the results of others, and respond to the reviews of their own work. In the context of a course, these activities correspond to learning the background material by listening to lectures or reading a text, formulating a problem, exploring data using student friendly data access and plotting software, giving brief talks to classmates in a small class or lab setting, writing a science paper or lab report, reviewing the writing of their peers, and receiving feedback (and grades) from their instructors and/or peers. These activities can be supported using course management software and online resources. The "LearningWithData" software system allows solid Earth (focused on plate tectonics) data exploration and plotting. Ocean data access, display, and plotting are also supported. Background material is delivered using animations and slide show type displays. Students are accountable for their learning through included homework assignments. Lab and small group activities provide support for data exploration and interpretation. Writing is most efficiently implemented using the "Calibrated Peer Review" method. This methodology is available at http://cpr.molsci.ucla.edu/. These methods have been successfully implemented in a large oceanography class at UCSB.

Economic Aspects of a Therapy and Support Service for People with Long-Term Stroke and Aphasia

ERIC Educational Resources Information Center

van der Gaag, Anna; Brooks, Richard

2008-01-01

Background: This paper considers some economic aspects of a therapy and support service for people with stroke and aphasia. This material was part of a broader evaluation of the service, which is reported elsewhere (van der Gaag et al. 2005, van der Gaag and Mowles 2005). Aims: The purpose of this part of the study was to investigate the…

Utilizing Diffuse Reflection to Increase the Efficiency of Luminescent Solar Concentrators

NASA Astrophysics Data System (ADS)

Bowser, Seth; Weible, Seth; Solomon, Joel; Schrecengost, Jonathan; Wittmershaus, Bruce

A luminescent solar concentrator (LSC) consists of a high index solid plate containing a fluorescent material that converts sunlight into fluorescence. Utilizing total internal reflection, the LSC collects and concentrates the fluorescence at the plate's edges where it is converted into electricity via photovoltaic solar cells. The lower production costs of LSCs make them an attractive alternative to photovoltaic solar cells. To optimize an LSC's efficiency, a white diffusive surface (background) is positioned behind it. The background allows sunlight transmitted in the first pass to be reflected back through the LSC providing a second chance for absorption. Our research examines how the LSC's performance is affected by changing the distance between the white background and the LSC. An automated linear motion apparatus was engineered to precisely measure this distance and the LSC's electrical current, simultaneously. LSC plates, with and without the presence of fluorescent material and in an isolated environment, showed a maximum current at a distance greater than zero. Further experimentation has proved that the optimal distance results from the background's optical properties and how the reflected light enters the LSC. This material is based upon work supported by the National Science Foundation under Grant Number NSF-ECCS-1306157.

Neutron induced radio-isotopes and background for Ge double beta decay experiments

NASA Astrophysics Data System (ADS)

Chu, Pinghan; Majorana Collaboration

2015-10-01

Environmental neutrons, mostly produced by muons in the cosmic rays, might contribute backgrounds to the search for neutrinoless double beta decays. These neutrons can interact with materials and generate radio-isotopes, which can decay and produce radioactive backgrounds. Some of these neutron-induced isotopes have a signature of a time-delayed coincidence, allowing us to study these infrequent events. For example, such isotopes can decay by beta decay to metastable states and then decay by gamma decay to the ground state. Considering the time-delayed coincidence of these two processes, we can determine candidates for these neutron-induced isotopes in the data and estimate the flux of neutrons in the deep underground environment. In this report, we will list possible neutron-induced isotopes and the methodology to detect them, especially those that can affect the search for neutrinoless double beta decays in 76Ge. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, the Particle Astrophysics Program of the National Science Foundation, and the Sanford Underground Research Facility. We acknowledge the support of the U.S. Department of Energy through the LANL/LDRD Program.

PHASE I MATERIALS PROPERTY DATABASE DEVELOPMENT FOR ASME CODES AND STANDARDS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju; Lin, Lianshan

2013-01-01

To support the ASME Boiler and Pressure Vessel Codes and Standard (BPVC) in modern information era, development of a web-based materials property database is initiated under the supervision of ASME Committee on Materials. To achieve efficiency, the project heavily draws upon experience from development of the Gen IV Materials Handbook and the Nuclear System Materials Handbook. The effort is divided into two phases. Phase I is planned to deliver a materials data file warehouse that offers a depository for various files containing raw data and background information, and Phase II will provide a relational digital database that provides advanced featuresmore » facilitating digital data processing and management. Population of the database will start with materials property data for nuclear applications and expand to data covering the entire ASME Code and Standards including the piping codes as the database structure is continuously optimized. The ultimate goal of the effort is to establish a sound cyber infrastructure that support ASME Codes and Standards development and maintenance.« less

Exploration of new superconductors and functional materials, and fabrication of superconducting tapes and wires of iron pnictides.

PubMed

Hosono, Hideo; Tanabe, Keiichi; Takayama-Muromachi, Eiji; Kageyama, Hiroshi; Yamanaka, Shoji; Kumakura, Hiroaki; Nohara, Minoru; Hiramatsu, Hidenori; Fujitsu, Satoru

2015-06-01

This review shows the highlights of a 4-year-long research project supported by the Japanese Government to explore new superconducting materials and relevant functional materials. The project found several tens of new superconductors by examining ∼1000 materials, each of which was chosen by Japanese experts with a background in solid state chemistry. This review summarizes the major achievements of the project in newly found superconducting materials, and the fabrication wires and tapes of iron-based superconductors; it incorporates a list of ∼700 unsuccessful materials examined for superconductivity in the project. In addition, described are new functional materials and functionalities discovered during the project.

Exploration of new superconductors and functional materials, and fabrication of superconducting tapes and wires of iron pnictides

PubMed Central

Hosono, Hideo; Tanabe, Keiichi; Takayama-Muromachi, Eiji; Kageyama, Hiroshi; Yamanaka, Shoji; Kumakura, Hiroaki; Nohara, Minoru; Hiramatsu, Hidenori; Fujitsu, Satoru

2015-01-01

This review shows the highlights of a 4-year-long research project supported by the Japanese Government to explore new superconducting materials and relevant functional materials. The project found several tens of new superconductors by examining ∼1000 materials, each of which was chosen by Japanese experts with a background in solid state chemistry. This review summarizes the major achievements of the project in newly found superconducting materials, and the fabrication wires and tapes of iron-based superconductors; it incorporates a list of ∼700 unsuccessful materials examined for superconductivity in the project. In addition, described are new functional materials and functionalities discovered during the project. PMID:27877784

The Children's Political Checklist.

ERIC Educational Resources Information Center

Coalition for Children and Youth, Washington, DC.

The purpose of this guide is to provide background and focus material for political action regarding several areas of concern related to children and their families: unemployment and the working parent, supports for family economic stability, health and family services, and the environment and the working parent. Each chapter presents brief…

Hadfield poses with MSL FLSS in the Node 2

NASA Image and Video Library

2012-12-23

View of Canada Space Agency (CSA) Chris Hadfield, Expedition 34 Flight Engineer (FE), poses with a Materials Science Laboratory (MSL) Furnace Launch Support Structure (FLSS) in the U.S. Laboratory. Tom Marshburn (background), Expedition 34 FE uses laptop computer. Photo was taken during Expedition 34.

Direct bonded HOPG - Analyzer support without background source

NASA Astrophysics Data System (ADS)

Groitl, Felix; Kitaura, Hidetoshi; Nishiki, Naomi; Rønnow, Henrik M.

2018-04-01

A new production process allows a direct bonding of HOPG crystals on Si wafers. This new method facilitates the production of analyzer crystals with support structure without the use of additional, background inducing fixation material, e.g. glue, wax and screws. This new method is especially interesting for the upcoming generation of CAMEA-type multiplexing spectrometers. These instruments allow for a drastic performance increase due to the increased angular coverage and multiple energy analysis. Exploiting the transparency of multiple HOPG for cold neutrons, a consecutive arrangement of HOPG analyzer crystals per Q-channel can be achieved. This implies that neutrons travel through up to 10 arrays of analyzer crystals before reaching the analyzer corresponding to their energy. Hence, a careful choice of the fixation method for the analyzer crystals in regards to transparency and background is necessary. Here, we present first results on the diffraction and mechanical performance of direct bonded analyzer crystals.

Calibration of a Background Oriented Schlieren (BOS) Set-up

NASA Astrophysics Data System (ADS)

Porta, David; Echeverría, Carlos; Cardoso, Hiroki; Aguayo, Alejandro; Stern, Catalina

2014-11-01

We use two materials with different known indexes of refraction to calibrate a Background Oriented Schlieren (BOS) experimental set-up, and to validate the Lorenz-Lorentz equation. BOS is used in our experiments to determine local changes of density in the shock pattern of an axisymmetric supersonic air jet. It is important to validate, in particular, the Gladstone Dale approximation (index of refraction close to one) in our experimental conditions and determine the uncertainty of our density measurements. In some cases, the index of refraction of the material is well known, but in others the density is measured and related to the displacement field. We acknowledge support from UNAM through DGAPA PAPIIT IN117712 and the Graduate Program in Mechanical Engineering.

Easy-Access Services in Low-Threshold Opiate Agonist Maintenance

ERIC Educational Resources Information Center

Hesse, Morten; Pedersen, Mads U.

2008-01-01

Background: There is currently evidence that methadone and buprenorphine maintenance is effective in reducing substance abuse. However, it is not known whether psychosocial support improves the outcome of methadone maintenance in the absence of control measures, such as regular urine testing. Materials and Methods: In a prospective observational…

Efficacy of a Peer-Guided Exercise Programme for Adolescents with Intellectual Disability

ERIC Educational Resources Information Center

Stanish, Heidi I.; Temple, Viviene A.

2012-01-01

Background: Peer support is strongly associated with physical activity of adolescents. This study examined the efficacy of a YMCA-based, peer-guided exercise training programme for increasing health-related physical fitness among adolescents with intellectual disabilities. Materials and Methods: Adolescents with intellectual disabilities and…

Hadfield poses with MSL FLSS in the Node 2

NASA Image and Video Library

2012-12-23

ISS034-E-010603 (28 Dec. 2012) --- Canadian Space Agency astronaut Chris Hadfield, Expedition 34 flight engineer, poses with a Materials Science Laboratory (MSL) Furnace Launch Support Structure (FLSS) in the Destiny laboratory of the International Space Station. NASA astronaut Tom Marshburn, flight engineer, uses a computer in the background.

Groups for Parents with Intellectual Disabilities: A Qualitative Analysis of Experiences

ERIC Educational Resources Information Center

Gustavsson, Marie; Starke, Mikaela

2017-01-01

Background: Parents with intellectual disabilities (IDs) are often socially isolated and need support. Materials and Methods: This qualitative study is based on participant observations of a group for parents with with intellectual disabilities. Data were categorized and interpreted in the framework of social capital and symbolic interactionism.…

A Comprehensive Program for Handicapped Students at the Two-Year College.

ERIC Educational Resources Information Center

Hanson, Karen M.

A summary is presented of the objectives and activities of a grant-supported project conducted at Normandale Community College (NCC) to expand programming for handicapped and learning disabled students. Introductory material provides a background to NCC's efforts in aiding students with special needs. Next, the populations receiving assistance…

Supporting Sustained Adoption of Education Innovations: The Designing for Sustained Adoption Assessment Instrument

ERIC Educational Resources Information Center

Stanford, Courtney; Cole, Renée; Froyd, Jeff; Friedrichsen, Debra; Khatri, Raina; Henderson, Charles

2015-01-01

Background: Every year, significant effort and resources are expended around the world to develop innovative instructional strategies and materials to improve undergraduate Science, Technology, Engineering, and Mathematics education. Despite convincing evidence of efficacy with respect to student learning, most will struggle to become successfully…

Factors Contributing to Stress in Parents of Individuals with Autistic Spectrum Disorders

ERIC Educational Resources Information Center

Tehee, Erin; Honan, Rita; Hevey, David

2009-01-01

Background: The study explores the experiences of parents of individuals with autistic spectrum disorders (ASDs), and examines the influences of parent gender and child age on perceived stress, stress and coping, child-rearing involvement, support and information/education accessed. Methods and Materials: Questionnaires assessed general perceived…

Centres for People with Intellectual Disabilities: Attendees' Perceptions of Benefit

ERIC Educational Resources Information Center

Gajewska, Urszula; Trigg, Richard

2016-01-01

Background: Day and community learning centres aim to provide intellectually disabled (ID) people with social support, life skills and greater control over their lives. However, there is little research exploring the benefits of attendance from the perspective of attendees and whether these goals are met. Materials and methods: Unstructured…

Surface alpha backgrounds from plate-out of radon progeny

NASA Astrophysics Data System (ADS)

Perumpilly, Gopakumar; Guiseppe, Vincente

2012-03-01

Low-background detectors operating underground aim for unprecedented low levels of radioactive backgrounds. Although the radioactive decays of airborne radon (particularly Rn-222) and its subsequent daughters present in an experiment are potential backgrounds, more troublesome is the deposition of radon daughters on detector materials. Exposure to radon at any stage of assembly of an experiment can result in surface contamination by daughters supported by the long half life (22 y) of Pb-210 on sensitive locations of a detector. We have developed a model of the radon progeny implantation using Geant4 simulations based on the low energy nuclear recoil process. We explore the alpha decays from implanted progeny on a Ge crystal as potential backgrounds for a neutrinoless double-beta decay experiment. Results of the simulations validated with alpha spectrum measurement of plate-out samples will be presented.

Liquid scintillation sample analysis in microcentrifuge tubes.

PubMed

Elliott, J C

1993-01-01

Local regulations prohibiting drain disposal of "biodegradable" liquid scintillation cocktails prompted investigation of volume reduction for these materials. Microcentrifuge tubes were used with aqueous and filter media samples of 3H, 14C, 32P, and 125I. Backgrounds, counting efficiencies, figures of merit, and spectral distributions obtained for microcentrifuge tubes compared favorably to conventional vials. Differences in 32P spectra for solid support samples appeared related to filter material and sample volume. Decreases in sample costs and waste volume and disposal costs were approximately 50-75%.

Lecturers' Attitudes on Electronically Supported Pre-Lecturing Material for Intensive Programs: A Case Study

ERIC Educational Resources Information Center

Kozaris, Ioannis; Varella, Evangelia A.

2010-01-01

In 2006 and 2008, two large trans-national residential summer schools on conservation science were organized as intensive programs. Learners were not only second/third cycle students in both exact sciences and humanities, but further practicing restorers; consequently their educational background, and even their way of approaching scientific…

A Mindfulness-Based Group for Young People with Learning Disabilities: A Pilot Study

ERIC Educational Resources Information Center

Thornton, Victoria; Williamson, Rachel; Cooke, Bronwen

2017-01-01

Background: Mindfulness is becoming increasingly reported as an effective way to support well-being and reduce mental health difficulties. Materials and Methods: This study reports on the development and pilot of a mindfulness-based group for young people with learning disabilities and their carers. Results: Group participants reported that the…

Consumer-Directed Goal Planning in the Delivery of Assistive Technology Services for People Who Are Ageing with Intellectual Disabilities

ERIC Educational Resources Information Center

Mirza, Mansha; Hammel, Joy

2009-01-01

Background: A consumer-directed service-delivery approach to assistive technology and environmental modification intervention was examined with people who were ageing with intellectual disabilities. Material and Methods: The intervention was based on a collaborative approach involving consumers, their social supports and service deliverers. Thirty…

Adapting Compassion Focused Therapy for an Adult with a Learning Disability--A Case Study

ERIC Educational Resources Information Center

Cooper, Rosalind; Frearson, Julia

2017-01-01

Background: Joe was referred to the Community Learning Disabilities Team (CLDT) for support around low mood and overeating. Initial formulation suggested compassion focused therapy (CFT) as an intervention. The evidence base for using CFT with people with learning disabilities is currently limited. Materials and Methods: Adaptations were made to…

Background studies in support of a feasibility assessment on the use of copper-base materials for nuclear waste packages in a repository in tuff

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Konynenburg, R.A.; Kundig, K.J.A.; Lyman, W.S.

1990-06-01

This report combines six work units performed in FY`85--86 by the Copper Development Association and the International Copper Research Association under contract with the University of California. The work includes literature surveys and state-of-the-art summaries on several considerations influencing the feasibility of the use of copper-base materials for fabricating high-level nuclear waste packages for the proposed repository in tuff rock at Yucca Mountain, Nevada. The general conclusion from this work was that copper-base materials are viable candidates for inclusion in the materials selection process for this application. 55 refs., 48 figs., 22 tabs.

Technology development life cycle processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, David Franklin

2013-05-01

This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81more » of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.« less

This Glorious Mud Pile (Rocky River Valley). Revised Edition.

ERIC Educational Resources Information Center

Cabbage, Mary Ellen

This student text focuses on the social and geological history of a river basin. In addition to background information, the text includes student worksheets for 12 field trip stops in Ohio's Rocky River Valley. Material is designed to support a full-day field trip during which students work in small groups. Also included are a geological…

Family Voices: Life for Family Carers of People with Intellectual Disabilities in Ireland

ERIC Educational Resources Information Center

Chadwick, Darren D.; Mannan, Hasheem; Garcia Iriarte, Edurne; McConkey, Roy; O'Brien, Patricia; Finlay, Frieda; Lawlor, Anne; Harrington, Gerry

2013-01-01

Background: Families in Ireland remain the main providers of support for people with Intellectual disabilities, and the aim of this study was to map their life experiences whilst involving their family members as co-researchers. Materials and Method: This qualitative, participatory study involved 10 focus groups attended by 70 parents and siblings…

Staff Morale in Day Care Centres for Adults with Intellectual Disabilities

ERIC Educational Resources Information Center

Mascha, Katerina

2007-01-01

Background: Levels of burnout, job satisfaction and intended turnover of staff working in day care centres for adults with intellectual disabilities are investigated in relation to role clarity, staff support and supervision, and coping strategies used by staff. Materials and methods: Thirty six direct-care staff of four day care centres in the UK…

40 CFR 63.4520 - What reports must I submit?

Code of Federal Regulations, 2013 CFR

2013-07-01

... waste materials according to § 63.4551(e)(4). You do not need to submit background data supporting these... of § 63.4551; and, if applicable, the calculation used to determine mass of organic HAP in waste... each CPMS was inoperative, except for zero (low-level) and high-level checks. (vii) The date, time, and...

40 CFR 63.3920 - What reports must I submit?

Code of Federal Regulations, 2011 CFR

2011-07-01

... waste materials according to § 63.3951(e)(4). You do not need to submit background data supporting these... of § 63.3951; and, if applicable, the calculation used to determine mass of organic HAP in waste... each CPMS was inoperative, except for zero (low-level) and high-level checks. (vii) The date, time, and...

40 CFR 63.3920 - What reports must I submit?

Code of Federal Regulations, 2013 CFR

2013-07-01

... waste materials according to § 63.3951(e)(4). You do not need to submit background data supporting these... of § 63.3951; and, if applicable, the calculation used to determine mass of organic HAP in waste... each CPMS was inoperative, except for zero (low-level) and high-level checks. (vii) The date, time, and...

Computers in My Curriculum? 18 Lesson Plans for Teaching Computer Awareness without a Computer. Adaptable Grades 3-12.

ERIC Educational Resources Information Center

Bailey, Suzanne Powers; Jeffers, Marcia

Eighteen interrelated, sequential lesson plans and supporting materials for teaching computer literacy at the elementary and secondary levels are presented. The activities, intended to be infused into the regular curriculum, do not require the use of a computer. The introduction presents background information on computer literacy, suggests a…

Staff Views of the Importance of Relationships for Knowledge Development: Is Training by Specialists a Waste of Money?

ERIC Educational Resources Information Center

Bradshaw, Jill; Goldbart, Juliet

2013-01-01

Background: The provision of skilled support is dependent on staff knowledge and understanding (Beadle-Brown J., Beecham J., Mansell J., Baumker T., Leigh J., Whelton R. & Richardson L, unpublished data). Influencing staff knowledge and understanding is an important component of interventions. Materials and Methods: Fourteen individual…

Software conversion history of the Flight Dynamics System (FDS)

NASA Technical Reports Server (NTRS)

Liu, K.

1984-01-01

This report summarizes the overall history of the Flight Dynamics System (FDS) applications software conversion project. It describes the background and nature of the project; traces the actual course of conversion; assesses the process, product, and personnel involved; and offers suggestions for future projects. It also contains lists of pertinent reference material and examples of supporting data.

Family Care of People with Intellectual Disability in Rural China: A Magnified Responsibility

ERIC Educational Resources Information Center

Pan, Lu; Ye, Jingzhong

2015-01-01

Background: Welfare for the disabled is becoming an important issue in China and care for people with intellectual disability is challenging because of the inadequacies in formal support and the social service system. Material and Method: Based on ethnographic research in two villages in North China, this paper analyses the dilemmas of family care…

Less Is More: Development and Evaluation of an Interactive e-Atlas to Support Anatomy Learning

ERIC Educational Resources Information Center

Guy, Richard; Pisani, Heather R.; Rich, Peter; Leahy, Cathy; Mandarano, Giovanni; Molyneux, Tom

2015-01-01

An Interactive electronic Atlas (IeA) was developed to assist first-year nursing students with interpretation of laboratory-based prosected cadaveric material. It was designed, using pedagogically sound principles, as a student-centered resource accessible to students from a wide range of learning backgrounds. It consisted of a highly simplified…

Network Training for a Boy with Learning Disabilities and Behaviours That Challenge

ERIC Educational Resources Information Center

Cooper, Kate; McElwee, Jennifer

2016-01-01

Background: Network Training is an intervention that draws upon systemic ideas and behavioural principles to promote positive change in networks of support for people defined as having a learning disability. To date, there are no published case studies looking at the outcomes of Network Training. Materials and Methods: This study aimed to…

Low background screening capability in the UK

NASA Astrophysics Data System (ADS)

Ghag, Chamkaur

2015-08-01

Low background rare event searches in underground laboratories seeking observation of direct dark matter interactions or neutrino-less double beta decay have the potential to profoundly advance our understanding of the physical universe. Successful results from these experiments depend critically on construction from extremely radiologically clean materials and accurate knowledge of subsequent low levels of expected background. The experiments must conduct comprehensive screening campaigns to reduce radioactivity from detector components, and these measurements also inform detailed characterisation and quantification of background sources and their impact, necessary to assign statistical significance to any potential discovery. To provide requisite sensitivity for material screening and characterisation in the UK to support our rare event search activities, we have re-developed our infrastructure to add ultra-low background capability across a range of complementary techniques that collectively allow complete radioactivity measurements. Ultra-low background HPGe and BEGe detectors have been installed at the Boulby Underground Laboratory, itself undergoing substantial facility re-furbishment, to provide high sensitivity gamma spectroscopy in particular for measuring the uranium and thorium decay series products. Dedicated low-activity mass spectrometry instrumentation has been developed at UCL for part per trillion level contaminant identification to complement underground screening with direct U and Th measurements, and meet throughput demands. Finally, radon emanation screening at UCL measures radon background inaccessible to gamma or mass spectrometry techniques. With this new capability the UK is delivering half of the radioactivity screening for the LZ dark matter search experiment.

Data Acquisition and Environmental Monitoring of the MAJORANA DEMONSTRATOR

NASA Astrophysics Data System (ADS)

Meijer, Samuel; Majorana Collaboration

2015-04-01

Low-background non-accelerator experiments have unique requirements for their data acquisition and environmental monitoring. Background signals can easily overwhelm the signals of interest, so events which could contribute to the background must be identified. There is a need to correlate events between detectors and environmental conditions, and data integrity must be maintained. Here, we describe several of the software and hardware techniques achieved by the MAJORANA Collaboration for the MAJORANA DEMONSTRATOR, such as using the Object-oriented Realtime Control and Acquisition (ORCA) software package. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, the Particle Astrophysics Program of the National Science Foundation, and the Sanford Underground Research Facility.

Simulation studies of muon-produced background events deep underground and consequences for double beta decay experiments

NASA Astrophysics Data System (ADS)

Massarczyk, Ralph; Majorana Collaboration

2015-10-01

Cosmic radiation creates a significant background for low count rate experiments. The Majorana demonstrator experiment is located at the Sanford Underground Research Facility at a depth of 4850ft below the surface but it can still be penetrated by cosmic muons with initial energies above the TeV range. The interaction of muons with the rock, the shielding material in the lab and the detector itself can produce showers of secondary particles, like fast neutrons, which are able to travel through shielding material and can produce high-energy γ-rays via capture or inelastic scattering. The energy deposition of these γ rays in the detector can overlap with energy region of interest for the neutrino-less double beta decay. Recent studies for cosmic muons penetrating the Majorana demonstrator are made with the Geant4 code. The results of these simulations will be presented in this talk and an overview of the interaction of the shower particles with the detector, shielding and veto system will be given. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, the Particle Astrophysics Program of the National Science Foundation, and the Sanford Underground Research Facility. Supported by U.S. Department of Energy through the LANL/LDRD Program.

18 CFR 347.1 - Material to support request for newly established or changed property account depreciation studies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... will protect individual shippers. (1) A brief summary relating to the general principles on which the proposed depreciation rates are based (e.g., why the economic life of the pipeline section is less then the... a physical basis and on an economic basis. (5) The following specific background data must be...

Self-Regulated Learning from Illustrated Text: Eye Movement Modelling to Support Use and Regulation of Cognitive Processes during Learning from Multimedia

ERIC Educational Resources Information Center

Scheiter, Katharina; Schubert, Carina; Schüler, Anne

2018-01-01

Background: When learning with text and pictures, learners often fail to adequately process the materials, which can be explained as a failure to self-regulate one's learning by choosing adequate cognitive learning processes. Eye movement modelling examples (EMME) showing how to process multimedia instruction have improved elementary school…

An Independent Investigation of the Utility of the Learning Disability Screening Questionnaire (LDSQ) within a Community Learning Disability Team

ERIC Educational Resources Information Center

Stirk, Steven; Field, Bryony; Black, Jessica

2018-01-01

Background: The Learning Disability Screening Questionnaire (LDSQ) has been shown to have high sensitivity and specificity to identify those who are likely to meet intellectual disability diagnostic criteria (McKenzie, et al. [McKenzie K., 2015]). However, there is no independent research to date to support these findings. Materials and Methods:…

The Role of the External Personal Assistants for Children with Profound Intellectual and Multiple Disabilities Working in the Children's Home

ERIC Educational Resources Information Center

Axelsson, Anna Karin

2015-01-01

Background: Children with profound intellectual and multiple disabilities need support to function in an optimal way. However, there is a limited knowledge about the role of external personal assistants working in the children's home. Materials and Methods: A mixed method study was performed including qualitative data from interviews with 11…

Influence of abutment material and luting cements color on the final color of all ceramics.

PubMed

Dede, Dogu Ömür; Armaganci, Arzu; Ceylan, Gözlem; Cankaya, Soner; Celik, Ersan

2013-11-01

The purpose of this study is to evaluate the effects of different abutment materials and luting cements color on the final color of implant-supported all-ceramic restorations. Ten A2 shade IPS e.max Press disc shape all-ceramic specimens were prepared (11 × 1.5 mm). Three different shades (translucent, universal and white opaque) of disc shape luting cement specimens were prepared (11 × 0.2 mm). Three different (zirconium, gold-palladium and titanium) implant abutments and one composite resin disc shape background specimen were prepared at 11 mm diameter and appropriate thicknesses. All ceramic specimens colors were measured with each background and luting cement samples on a teflon mold. A digital spectrophotometer used for measurements and data recorded as CIE L*a*b* color co-ordinates. An optical fluid applied on to the samples to provide a good optical connection and measurements on the composite resin background was saved as the control group. ΔE values were calculated from the ΔL, Δa and Δb values between control and test groups and data were analyzed with one-way variance analysis (ANOVA) and mean values were compared by the Tukey HSD test (α = 0.05). One-way ANOVA of ΔL, Δa, Δb and ΔE values of control and test groups revealed significant differences for backgrounds and seldom for cement color groups (p the 0.05). Only zirconium implant abutment groups and gold palladium abutment with universal shade cement group were found to be clinically acceptable (ΔE ≤ 3.0). Using titanium or gold-palladium abutments for implant supported all ceramics will be esthetically questionable and white opaque cement will be helpful to mask the dark color of titanium abutment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghag, Chamkaur

Low background rare event searches in underground laboratories seeking observation of direct dark matter interactions or neutrino-less double beta decay have the potential to profoundly advance our understanding of the physical universe. Successful results from these experiments depend critically on construction from extremely radiologically clean materials and accurate knowledge of subsequent low levels of expected background. The experiments must conduct comprehensive screening campaigns to reduce radioactivity from detector components, and these measurements also inform detailed characterisation and quantification of background sources and their impact, necessary to assign statistical significance to any potential discovery. To provide requisite sensitivity for material screeningmore » and characterisation in the UK to support our rare event search activities, we have re-developed our infrastructure to add ultra-low background capability across a range of complementary techniques that collectively allow complete radioactivity measurements. Ultra-low background HPGe and BEGe detectors have been installed at the Boulby Underground Laboratory, itself undergoing substantial facility re-furbishment, to provide high sensitivity gamma spectroscopy in particular for measuring the uranium and thorium decay series products. Dedicated low-activity mass spectrometry instrumentation has been developed at UCL for part per trillion level contaminant identification to complement underground screening with direct U and Th measurements, and meet throughput demands. Finally, radon emanation screening at UCL measures radon background inaccessible to gamma or mass spectrometry techniques. With this new capability the UK is delivering half of the radioactivity screening for the LZ dark matter search experiment.« less

Interdisciplinary research and education in the Vienna Doctoral Programme on Water Resource Systems: a framework for evaluation

NASA Astrophysics Data System (ADS)

Bloeschl, G.; Carr, G.; Loucks, D. P.

2017-12-01

Greater understanding of how interdisciplinary research and education evolves is critical for identifying and implementing appropriate programme management strategies. We propose a program evaluation framework that is based on social learning processes (individual learning, interdisciplinary research practices, and interaction between researchers with different backgrounds); social capital outcomes (ability to interact, interpersonal connectivity, and shared understanding); and knowledge and human capital outcomes (new knowledge that integrates multiple research fields). The framework is tested on established case study doctoral program: the Vienna Doctoral Program on Water Resource Systems. Data are collected via mixed qualitative/quantitative methods that include semi-structured interviews, publication co-author analysis, analysis of research proposals, categorisation of the interdisciplinarity of publications and graduate analysis. Through the evaluation and analysis, several interesting findings about how interdisciplinary research evolves and can be supported are identified. Firstly, different aspects of individual learning seem to contribute to a researcher's ability to interact with researchers from other research fields and work collaboratively. These include learning new material from different research fields, learning how to learn new material and learning how to integrate different material. Secondly, shared interdisciplinary research practices can be identified that may be common to other programs and support interaction and shared understanding between different researchers. They include clarification and questioning, harnessing differences and setting defensible research boundaries. Thirdly, intensive interaction between researchers from different backgrounds support connectivity between the researchers, further enabling cross-disciplinary collaborative work. The case study data suggest that social learning processes and social capital outcomes precede new interdisciplinary research findings and are therefore a critical aspect to consider in interdisciplinary program management.

Factors Affecting the Involvement of Day Centre Care Staff in the Delivery of Physiotherapy to Adults with Intellectual Disabilities: An Exploratory Study in One London Borough

ERIC Educational Resources Information Center

Middleton, M. -J.; Kitchen, S. S.

2008-01-01

Background: Physiotherapists for adults with intellectual disabilities often work in day centres, relying on care staff to support programmes. This study investigates factors affecting physiotherapy delivery in 4 day centres in one London borough. Materials and Method: Semi-structured interviews were carried out with day centre care staff,…

Perspectives of US Direct Care Workers on the Grief Process of Persons with Intellectual and Developmental Disabilities: Implications for Practice

ERIC Educational Resources Information Center

Gray, Jennifer A.; Abendroth, Maryann

2016-01-01

Background: The study explored the grief process of persons with intellectual and developmental disabilities (PWIDDs) as perceived by direct care workers (DCWs) and how such workers can guide and support PWIDDs experiencing grief. Materials and Methods: A thematic analysis approach was used to examine data from nine focus groups with 60 DCWs from…

End-of-Life Care and Dying: Issues Raised by Staff Supporting Older People with Intellectual Disability in Community Living Services

ERIC Educational Resources Information Center

Wiese, Michele; Stancliffe, Roger J.; Balandin, Susan; Howarth, Glennys; Dew, Angela

2012-01-01

Background: The aim of this study was to explore the current status of end-of-life care and dying of people with intellectual disability based on the experiences of staff in community living services. Materials and Methods: Focus groups and individual interviews were conducted, guided by grounded theory methodology. Results: The current status of…

The Evolution of Interstellar Gas: Massive Stars and the Dispersal of Neutral Material

NASA Technical Reports Server (NTRS)

Federman, Steven R.

2003-01-01

We studied the effects of newly formed O and B stars on their surrounding interstellar material through a combination of observations and theoretical modeling. The observational data came from measurements of absorption seen in the spectra of background, newly formed stars. Particular attention was given to stellar radiation which converts molecular to atomic material. Laboratory data on absorption cross sections relevant to the analysis and interpretation of carbon monoxide formed part of the effort. The grant supported Postdoctoral Fellows, Drs. Min Yan and Yaron Sheffer, and a laboratory technician. Though the students themselves were not supported. one M.S. Thesis and two Ph.D. dissertations from the University of Toledo were based on the research done under the grant. The research accomplished under this grant led directly to other funded programs. An observing proposal to study the chemistry of diffuse molecular clouds in the Large and Small Magellanic Clouds with ESO s Very Large Telescope was another example of a successful outcome of my LTSA program.

Influence of implant abutment material on the color of different ceramic crown systems.

PubMed

Dede, Doğu Ömür; Armağanci, Arzu; Ceylan, Gözlem; Celik, Ersan; Cankaya, Soner; Yilmaz, Burak

2016-11-01

Ceramics are widely used for anterior restorations; however, clinical color reproduction still constitutes a challenge particularly when the ceramic crowns are used on titanium implant abutments. The purpose of this in vitro study was to investigate the effect of implant abutment material on the color of different ceramic material systems. Forty disks (11×1.5 mm, shade A2) were fabricated from medium-opacity (mo) and high-translucency (ht) lithium disilicate (IPS e.max) blocks, an aluminous ceramic (VITA In-Ceram Alumina), and a zirconia (Zirkonzahn) ceramic system. Disks were fabricated to represent 3 different implant abutments (zirconia, gold-palladium, and titanium) and dentin (composite resin, A2 shade) as background (11×2 mm). Disk-shaped composite resin specimens in A2 shade were fabricated to represent the cement layer. The color measurements of ceramic specimens were made on composite resin abutment materials using a spectrophotometer. CIELab color coordinates were recorded, and the color coordinates measured on composite resin background served as the control group. Color differences (ΔE 00 ) between the control and test groups were calculated. The data were analyzed with 2-way analysis of variance (ANOVA) and compared with the Tukey HSD test (α=.05). The ceramics system, abutment material, and their interaction were significant for ΔE 00 values (P<.001). Clinically unacceptable results (ΔE 00 >2.25) were observed for lithium disilicate ceramics on titanium abutments (2.46-2.50). The ΔE 00 values of lithium disilicate ceramics for gold-palladium and titanium abutments were significantly higher than for other groups (P<.05). The color results (ΔE 00 >2.25) of an implant-supported lithium disilicate ceramic restoration may be clinically unacceptable if it is fabricated over a titanium abutment. Zirconia may be a more suitable abutment material for implant-supported ceramic restorations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

2013 ACC/AHA guideline on the treatment of blood cholesterol to reduce atherosclerotic cardiovascular risk in adults: A report of the American College of Cardiology/American Heart Association task force on practice guidelines

USDA-ARS?s Scientific Manuscript database

This guideline is based on the Full Panel Report which is provided as a data supplement to the guideline. The Full Panel Report contains background and additional material related to content, methodology, evidence synthesis, rationale and references and is supported by the NHLBI Systematic Evidence ...

X-ray Diffraction System for Advanced Materials Analysis in Research and Education

DTIC Science & Technology

2016-05-27

on education. These courses have are important because they prepare students for industry and, as they move to more research - intensive work, the...real-life experimental research experience with emphasis on nanoscale device fabrication. The course provides a strong background in devices with...institution, and will support future research initiatives based on a 5-year warranty and broad base of university funding to projects. The system is

Hyperspectral imaging for differentiation of foreign materials from pinto beans

NASA Astrophysics Data System (ADS)

Mehrubeoglu, Mehrube; Zemlan, Michael; Henry, Sam

2015-09-01

Food safety and quality in packaged products are paramount in the food processing industry. To ensure that packaged products are free of foreign materials, such as debris and pests, unwanted materials mixed with the targeted products must be detected before packaging. A portable hyperspectral imaging system in the visible-to-NIR range has been used to acquire hyperspectral data cubes from pinto beans that have been mixed with foreign matter. Bands and band ratios have been identified as effective features to develop a classification scheme for detection of foreign materials in pinto beans. A support vector machine has been implemented with a quadratic kernel to separate pinto beans and background (Class 1) from all other materials (Class 2) in each scene. After creating a binary classification map for the scene, further analysis of these binary images allows separation of false positives from true positives for proper removal action during packaging.

Patterning of supported lipid bilayers and proteins using material selective nitrodopamine-mPEG.

PubMed

Spycher, Philipp R; Hall, Heike; Vogel, Viola; Reimhult, Erik

2015-01-01

We present a generic patterning process by which biomolecules in a passivated background are patterned directly from physiological buffer to microfabricated surfaces without the need for further processing. First, nitrodopamine-mPEG is self-assembled to selectively render TiO2 patterns non-fouling to biomolecule adsorption on hydrophilic and adhesive glass surfaces. After the controlled TiO2 passivation, the biomolecules can be directly adsorbed from solution in a single step creating large scale micropatterned and highly homogeneous arrays of biomolecules with very high pattern definition. We demonstrate the formation of fluid supported lipid bilayers (SLBs) down to the single μm-level limited only by the photolithographic process. Non-specific adsorption of lipid vesicles to the TiO2 background was found to be almost completely suppressed. The SLB patterns can be further selectively functionalized with retained mobility, which we demonstrate through biotin-streptavidin coupling. We envision this single step patterning approach to be very beneficial for membrane-based biosensors and for pattering of cells on a passivated background with complex, sub-cellular geometries; in each application the adherent areas have a tunable mobility of interaction sites controlled by the fluidity of the membrane.

A radon progeny deposition model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rielage, Keith; Elliott, Steven R; Hime, Andrew

2010-12-01

The next generation low-background detectors operating underground aim for unprecedented low levels of radioactive backgrounds. Although the radioactive decays of airborne radon (particularly {sup 222}Rn) and its subsequent progeny present in an experiment are potential backgrounds, also problematic is the deposition of radon progeny on detector materials. Exposure to radon at any stage of assembly of an experiment can result in surface contamination by progeny supported by the long half life (22 y) of {sup 210}Pb on sensitive locations of a detector. An understanding of the potential surface contamination from deposition will enable requirements of radon-reduced air and clean roommore » environments for the assembly of low background experiments. It is known that there are a number of environmental factors that govern the deposition of progeny onto surfaces. However, existing models have not explored the impact of some environmental factors important for low background experiments. A test stand has been constructed to deposit radon progeny on various surfaces under a controlled environment in order to develop a deposition model. Results from this test stand and the resulting deposition model are presented.« less

Effects of Prosthetic Material and Framework Design on Stress Distribution in Dental Implants and Peripheral Bone: A Three-Dimensional Finite Element Analysis.

PubMed

Arinc, Hakan

2018-06-22

BACKGROUND The purpose of this study was to evaluate the effects of prosthetic material and framework design on the stress within dental implants and peripheral bone using finite element analysis (FEA). MATERIAL AND METHODS A mandibular implant-supported fixed dental prosthesis with different prosthetic materials [cobalt-chromium-supported ceramic (C), zirconia-supported ceramic (Z), and zirconia-reinforced polymethyl methacrylate (ZRPMMA)-supported resin (ZP)] and different connector widths (2, 3, and 4 mm) within the framework were used to evaluate stress via FEA under oblique loading conditions. Maximum principal (smax), minimum principal (smin), and von Mises (svM) stress values were obtained. RESULTS Minimum stress values were observed in the model with a 2-mm connector width for C and ZP. The models with 3-mm and 4-mm connector widths showed higher stress values than the model with a 2-mm connector width for C (48-50%) and ZP (50-52%). Similar stress values were observed in the 3- and 4-mm models. There was no significant difference in the amount of stress with Z regardless of connector width. The Z and ZP models showed similar stress values in the 3- and 4-mm models and higher stress values than in the C model. Z, ZP, and C showed the highest stress values for the model with a 2-mm connector width. CONCLUSIONS Changes in the material and width of connectors may influence stress on cortical bone, cancellous bone, and implants. C was associated with the lowest stress values. Higher maximum and minimum principal stress values were seen in cortical bone compared to cancellous bone.

Supply Chain Engineering and the Use of a Supporting Knowledge Management Application

NASA Astrophysics Data System (ADS)

Laakmann, Frank

The future competition in markets will happen between logistics networks and no longer between enterprises. A new approach for supporting the engineering of logistics networks is developed by this research as a part of the Collaborative Research Centre (SFB) 559: "Modeling of Large Networks in Logistics" at the University of Dortmund together with the Fraunhofer-Institute of Material Flow and Logistics founded by Deutsche Forschungsgemeinschaft (DFG). Based on a reference model for logistics processes, the process chain model, a guideline for logistics engineers is developed to manage the different types of design tasks of logistics networks. The technical background of this solution is a collaborative knowledge management application. This paper will introduce how new Internet-based technologies support supply chain design projects.

A shuttle and space station manipulator system for assembly, docking, maintenance, cargo handling and spacecraft retrieval (preliminary design). Volume 2: Concept development and selection

NASA Technical Reports Server (NTRS)

1972-01-01

The overall program background, the various system concepts considered, and the rationale for the selected design are described. The concepts for each subsystem are also described and compared. Details are given for the requirements, boom configuration and dynamics, actuators, man/machine interface and control, visual system, control system, environmental control and life support, data processing, and materials.

A radon daughter deposition model for low background experiments

NASA Astrophysics Data System (ADS)

Rielage, K.; Guiseppe, V. E.; Mastbaum, A.; Elliott, S. R.; Hime, A.

2009-05-01

The next generation low-background detectors operating underground, such as dark matter searches and neutrinoless double-beta decay, aim for unprecedented low levels of radioactive backgrounds. Although the radioactive decays of airborne radon (particularly ^222Rn) and its subsequent daughters present in an experiment are potential backgrounds, more troublesome is the deposition of radon daughters on detector materials. Exposure to radon at any stage of assembly of an experiment can result in surface contamination by daughters supported by the long half life (22 y) of ^210Pb on sensitive locations of a detector. An understanding of the potential surface contamination will enable requirements of radon-reduced air and clean room environments for the assembly of low background experiments. It is known that there are a number of environmental factors that govern the deposition of daughters onto surfaces. However, existing models have not explored the impact of some environmental factors important for low background experiments. A test stand has been constructed to deposit radon daughters on various surfaces under a controlled environment in order to develop a deposition model. Results from this test stand and the resulting deposition model will be presented.

Radon backgrounds in the DEAP-1 liquid-argon-based Dark Matter detector

NASA Astrophysics Data System (ADS)

Amaudruz, P.-A.; Batygov, M.; Beltran, B.; Boudjemline, K.; Boulay, M. G.; Cai, B.; Caldwell, T.; Chen, M.; Chouinard, R.; Cleveland, B. T.; Contreras, D.; Dering, K.; Duncan, F.; Ford, R.; Gagnon, R.; Giuliani, F.; Gold, M.; Golovko, V. V.; Gorel, P.; Graham, K.; Grant, D. R.; Hakobyan, R.; Hallin, A. L.; Harvey, P.; Hearns, C.; Jillings, C. J.; Kuźniak, M.; Lawson, I.; Li, O.; Lidgard, J.; Liimatainen, P.; Lippincott, W. H.; Mathew, R.; McDonald, A. B.; McElroy, T.; McFarlane, K.; McKinsey, D.; Muir, A.; Nantais, C.; Nicolics, K.; Nikkel, J.; Noble, T.; O'Dwyer, E.; Olsen, K. S.; Ouellet, C.; Pasuthip, P.; Pollmann, T.; Rau, W.; Retiere, F.; Ronquest, M.; Skensved, P.; Sonley, T.; Tang, J.; Vázquez-Jáuregui, E.; Veloce, L.; Ward, M.

2015-03-01

The DEAP-1 7 kg single phase liquid argon scintillation detector was operated underground at SNOLAB in order to test the techniques and measure the backgrounds inherent to single phase detection, in support of the DEAP-3600 Dark Matter detector. Backgrounds in DEAP are controlled through material selection, construction techniques, pulse shape discrimination, and event reconstruction. This report details the analysis of background events observed in three iterations of the DEAP-1 detector, and the measures taken to reduce them. The 222 Rn decay rate in the liquid argon was measured to be between 16 and 26 μBq kg-1. We found that the background spectrum near the region of interest for Dark Matter detection in the DEAP-1 detector can be described considering events from three sources: radon daughters decaying on the surface of the active volume, the expected rate of electromagnetic events misidentified as nuclear recoils due to inefficiencies in the pulse shape discrimination, and leakage of events from outside the fiducial volume due to imperfect position reconstruction. These backgrounds statistically account for all observed events, and they will be strongly reduced in the DEAP-3600 detector due to its higher light yield and simpler geometry.

Calibration of an Ultra-Low-Background Proportional Counter for Measuring 37Ar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seifert, Allen; Aalseth, Craig E.; Bonicalzi, Ricco

Abstract. An ultra-low-background proportional counter (ULBPC) design has been developed at Pacific Northwest National Laboratory (PNNL) using clean materials, primarily electrochemically-purified copper. This detector, along with an ultra-low-background counting system (ULBCS), was developed to complement a new shallow underground laboratory (30 meters water-equivalent) constructed at PNNL. The ULBCS design includes passive neutron and gamma shielding, along with an active cosmic-veto system. This system provides a capability for making ultra-sensitive measurements to support applications like age-dating soil hydrocarbons with 14C/3H, age-dating of groundwater with 39Ar, and soil-gas assay for 37Ar to support On-Site Inspection (OSI). On-Site Inspection is a key componentmore » of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Measurements of radionuclides created by an underground nuclear explosion are valuable signatures of a Treaty violation. For OSI, the 35-day half-life of 37Ar, produced from neutron interactions with calcium in soil, provides both high specific activity and sufficient time for inspection before decay limits sensitivity. This work describes the calibration techniques and analysis methods developed to enable quantitative measurements of 37Ar samples over a broad range of pressures. These efforts, along with parallel work in progress on gas chemistry separation, are expected to provide a significant new capability for 37Ar soil gas background studies.« less

Processing medical data: a systematic review

PubMed Central

2013-01-01

Background Medical data recording is one of the basic clinical tools. Electronic Health Record (EHR) is important for data processing, communication, efficiency and effectiveness of patients’ information access, confidentiality, ethical and/or legal issues. Clinical record promote and support communication among service providers and hence upscale quality of healthcare. Qualities of records are reflections of the quality of care patients offered. Methods Qualitative analysis was undertaken for this systematic review. We reviewed 40 materials Published from 1999 to 2013. We searched these materials from databases including ovidMEDLINE and ovidEMBASE. Two reviewers independently screened materials on medical data recording, documentation and information processing and communication. Finally, all selected references were summarized, reconciled and compiled as one compatible document. Result Patients were dying and/or getting much suffering as the result of poor quality medical records. Electronic health record minimizes errors, saves unnecessary time, and money wasted on processing medical data. Conclusion Many countries have been complaining for incompleteness, inappropriateness and illegibility of records. Therefore creating awareness on the magnitude of the problem has paramount importance. Hence available correct patient information has lots of potential in reducing errors and support roles. PMID:24107106

Proposed US Contributions to LOFT

NASA Technical Reports Server (NTRS)

Wilson-Hodge, Colleen

2013-01-01

Proposed US Enhancements include:Tantalum X -ray collimator, Additional ground station, Large Observatory for X-Ray Timing (LOFT) instrument team participation, US science support center & data archive, and Science enabled by US hardware. High-Z material with excellent stopping power. Fabricated using a combination of laser micromachining and chemical etching. Known technology capable of producing high-aspect ratio holes and large open fractions. Reduces LOFT LAD background by a factor of 3. Telemetry formats for LOFT based upon RXTE/EDS experience. Ground system software and strategies for WFM based upon RXTE/ASM automated pipeline software. MSFC engineering trade studies supporting the Ta collimator. Burst alert triggers based upon Fermi/GBM and HETE-2. Science Enhancements Enabled by US Hardware include: Tantalum collimator: Reduces background by factor of 3. Improves sensitivity to faint sources such as AGN. Eliminates contamination by bright/variable sources. outside the LAD field of view. US Ground Station: Enables continuous telemetry of all events from the WFM. Allows LAD to observe very bright >500 mCrab sources with full event resolution.

Lunar cartographic dossier, volume 1

NASA Technical Reports Server (NTRS)

Schimerman, L. A. (Editor)

1975-01-01

The dossier is designed to provide an up to date summary of the extent and quality of cartographic information as well as describing materials available to support lunar scientific investigation and study. It covers the specific photographic, selenodetic and cartographic data considered to be of continuing significance to users of lunar cartographic information. Historical background data is included. Descriptive and evaluative information is presented concerning lunar maps, photomaps and photo mosaics. Discussion comprises identification of series or individual sheet characteristics, control basis, source materials and compilation methodology used. The global, regional and local selenodetic control are described which were produced for lunar feature location in support of lunar mapping or positional study. Further discussion covers the fundamental basis for each control system, number of points produced, techniques employed and evaluated accuracy. Although lunar photography is an informational source rather than a cartographic product, a photography section was included to facilitate correlation to the mapping and control works described. Description of lunar photographic systems, photography and photo support data are presented from a cartographic-photogrammetric viewpoint with commentary on cartographic applications.

Perceived social support and life satisfaction in persons with somatization disorder

PubMed Central

Ali, Arif; Deuri, S. P.; Deuri, S. K.; Jahan, Masroor; Singh, Amool R.; Verma, A. N.

2010-01-01

Background: Life satisfaction and perceived social support been shown to improve the well-being of a person and also affect the outcome of treatment in somatization disorder. The phenomenon of somatization was explored in relation to the perceived social support and life satisfaction. Aim: This study aimed at investigating perceived social support and life satisfaction in people with somatization disorder. Materials and Methods: The study was conducted on persons having somatization disorder attending the outpatient unit of LGB Regional Institute of Mental Health, Tezpur, Assam. Satisfaction with life scale and multidimensional scale of perceived social support were used to assess life satisfaction and perceived social support respectively. Results: Women reported more somatic symptoms than men. Family perceived social support was high in the patient in comparison to significant others’ perceived social support and friends’ perceived social support. Perceived social support showed that a significant positive correlation was found with life satisfaction. Conclusion: Poor social support and low life satisfaction might be a stress response with regard to increased distress severity and psychosocial stressors rather than a cultural response to express psychological problems in somatic terms. PMID:22174534

Comparison of two hardware-based hit filtering methods for trackers in high-pileup environments

NASA Astrophysics Data System (ADS)

Gradin, J.; Mårtensson, M.; Brenner, R.

2018-04-01

As experiments in high energy physics aim to measure increasingly rare processes, the experiments continually strive to increase the expected signal yields. In the case of the High Luminosity upgrade of the LHC, the luminosity is raised by increasing the number of simultaneous proton-proton interactions, so-called pile-up. This increases the expected yields of signal and background processes alike. The signal is embedded in a large background of processes that mimic that of signal events. It is therefore imperative for the experiments to develop new triggering methods to effectively distinguish the interesting events from the background. We present a comparison of two methods for filtering detector hits to be used for triggering on particle tracks: one based on a pattern matching technique using Associative Memory (AM) chips and the other based on the Hough transform. Their efficiency and hit rejection are evaluated for proton-proton collisions with varying amounts of pile-up using a simulation of a generic silicon tracking detector. It is found that, while both methods are feasible options for a track trigger with single muon efficiencies around 98–99%, the AM based pattern matching produces a lower number of hit combinations with respect to the Hough transform whilst keeping more of the true signal hits. We also present the effect on the two methods of increasing the amount of support material in the detector and of introducing inefficiencies by deactivating detector modules. The increased support material has negligable effects on the efficiency for both methods, while dropping 5% (10%) of the available modules decreases the efficiency to about 95% (87%) for both methods, irrespective of the amount of pile-up.

Financial Management: Naval Ammunition Logistics Center Financial Reporting of Ammunition and Other Ordnance Assets in Operating Materials and Supplies for FY 2002

DTIC Science & Technology

2002-10-30

2002 Report Type N/A Dates Covered (from... to) - Title and Subtitle Financial Management: Naval Ammunition Logistics Center Financial Reporting of...October 30, 2002 Project No. D2001FJ –0179.001 Naval Ammunition Logistics Center Financial Reporting of Ammunition and Other Ordnance Assets in...it provides information concerning the financial reporting of ammunition and ordnance assets. Background. The audit was performed in support of

Research study entitled advanced X-ray astrophysical observatory (AXAF). [system engineering for a total X-ray telescope assembly

NASA Technical Reports Server (NTRS)

Rasche, R. W.

1979-01-01

General background and overview material are presented along with data from studies performed to determine the sensitivity, feasibility, and required performance of systems for a total X-ray telescope assembly. Topics covered include: optical design, mirror support concepts, mirror weight estimates, the effects of l g on mirror elements, mirror assembly resonant frequencies, optical bench considerations, temperature control of the mirror assembly, and the aspect determination system.

Pulsed laser vaporization synthesis of boron loaded few layered graphene (Conference Presentation)

NASA Astrophysics Data System (ADS)

Tennyson, Wesley D.; Tian, Mengkun; More, Karren L.; Geohegan, David B.; Puretzky, Alexander A.; Papandrew, Alexander B.; Rouleau, Christopher M.; Yoon, Mina

2017-02-01

The bulk production of loose graphene flakes and its doped variants are important for energy applications including batteries, fuel cells, and supercapacitors as well as optoelectronic and thermal applications. While laser-based methods have been reported for large-scale synthesis of single-wall carbon nanohorns (SWNHs), similar large-scale production of graphene has not been reported. Here we explored the synthesis of doped few layered graphene by pulsed laser vaporization (PLV) with the goal of producing an oxidation resistant electrode support for solid acid fuel cells. PLV of graphite with various amounts of boron was carried out in mixtures in either Ar or Ar/H2 at 0.1 MPa at elevated temperatures under conditions typically used for synthesis of SWNHs. Both the addition of hydrogen to the background argon, or the addition of boron to the carbon target, was found to shift the formation of carbon nanohorns to two-dimensional flakes of a new form of few-layer graphene material, with sizes up to microns in dimension as confirmed by XRD and TEM. However, the materials made with boron exhibited superior resistance to carbon corrosion in the solid acid fuel cell and thermal oxidation resistance in air compared to similar product made without boron. Mechanisms for the synthesis and oxidation resistance of these materials will be discussed based upon detailed characterization and modeling. •Synthesis science was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences (BES), Materials Sciences and Engineering Division. Material processing and characterization science supported by ARPA-E under Cooperative Agreement Number DE-AR0000499 and as a user project at the Center for Nanophase Materials Sciences, a Department of Energy Office of Science User Facility.

Linking water quality guidelines to the natural characteristics of catchments in order to support distinct aquatic ecosystems: Water quality guidelines for suspended particulate matter

NASA Astrophysics Data System (ADS)

Bilotta, G. S.; Grove, M. K.; Harrison, C.; Joyce, C. B.; Peacock, C.

2012-12-01

The natural characteristics of a catchment provide a template that controls the background rates of geomorphological processes operating within that catchment, which in-turn determines the background physico-chemical and hydro-morphological characteristics of the catchment's surface waters. Large differences in the natural characteristics of catchments (e.g. geology, topography, climate), lead to unique physico-chemical and hydro-morphological conditions that support unique freshwater communities. However, this uniqueness is not always recognised in international water quality guidelines, which often attempt to apply blanket water-quality guidelines to 'protect' a wide range of ecosystems. In this paper we investigate the natural characteristics that control background concentrations of suspended particulate matter (SPM - including nano-scale particles to sand-sized sediments), which is a well-known cause of ecological degradation. At present, the management of SPM is hampered by a lack of understanding of the SPM conditions that water quality managers should aim to achieve in contrasting environments in order to support good ecological status. To address this, in this paper we examine the SPM preferences of contrasting biological communities that are in reference condition (minimal anthropogenic disturbance and high ecological status). We analyse historical SPM data collected on a monthly basis from a wide range of reference-condition temperate environments (638 stream/river sites comprising 42 different biological community-types). This analysis reveals that there are statistically significant differences (One-way ANOVA p < 0.001) between the background SPM concentrations observed in contrasting communities that are in reference condition. Mean background SPM concentrations for contrasting communities ranged from 1.7 to 26.2 mg L-1 (i.e. more than a 15-fold difference). We propose a model for predicting environment-specific water quality guidelines for SPM. In order to develop this model, the 638 reference-condition sites were first classified into one of five mean background SPM ranges (0.00-5.99, 6.00-11.99, 12.00-17.99, 18.00-23.99 and >24.00 mg L-1). Stepwise Multiple Discriminant Analysis (MDA) of these ranges showed that a site's SPM range can be predicted as a function of: mean annual air temperature, mean annual precipitation, mean altitude of upstream catchment, distance from source, slope to source, channel width and depth, the percentage of catchment area comprised of clay, chalk, and hard rock solid geology, and the percentage of the catchment area comprised of blown sand/landslide material as the surface (drift) material. Although the model is still being improved and developed, this research highlights the need to link water quality guidelines to the natural characteristics of catchments and the physico-chemical preferences of the biological communities that would naturally inhabit them.

Engineered materials characterization report, volume 3 - corrosion data and modeling update for viability assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCright, R D

1998-06-30

This Engineered Materials Characterization Report (EMCR), Volume 3, discusses in considerable detail the work of the past 18 months on testing the candidate materials proposed for the waste-package (WP) container and on modeling the performance of those materials in the Yucca Mountain (YM) repository setting This report was prepared as an update of information and serves as one of the supporting documents to the Viability Assessment (VA) of the Yucca Mountain Project. Previous versions of the EMCR have provided a history and background of container-materials selection and evaluation (Volume I), a compilation of physical and mechanical properties for the WPmore » design effort (Volume 2), and corrosion-test data and performance-modeling activities (Volume 3). Because the information in Volumes 1 and 2 is still largely current, those volumes are not being revised. As new information becomes available in the testing and modeling efforts, Volume 3 is periodically updated to include that information.« less

[Study on the influencing factors related to suicide ideation among undergraduates in Anhui province].

PubMed

Fan, Yin-Guang; Xiao, Qin; Wang, Qian; Li, Wen-Xian; Dong, Ma-Xia; Ye, Dong-Qing

2008-03-01

To explore the relationships between quality of life, negative life events, social support and suicide ideation among undergraduates in colleges. 3517 undergraduates in colleges were recruited by multistage stratified random clustered sampling method. Factors associated with suicide ideation were analyzed with logistic regression by scores of Beck Scale for Suicide Ideation(BSSI), Generic Quality of Life Inventory (GQOLI), Adolescent Self-rate Life Events Checklist (ASLEC), Social Support Rating Scale (SSRS) and a questionnaire on background information. The rate of suicide ideation within 7 days was 14.1%, especially in females (15.96%), with single parent (23.79%) and disabled undergraduates (25.00%). The primary risk factors for suicide ideation were with low psychological function, material life, family/social support, lower availability of support and more negative life events. The prevalence of suicide ideation among these undergraduates was high, appropriate measures focusing on these risk factors should be implemented.

Simultaneous Communication Supports Learning in Noise by Cochlear Implant Users

PubMed Central

Blom, Helen C.; Marschark, Marc; Machmer, Elizabeth

2017-01-01

Objectives This study sought to evaluate the potential of using spoken language and signing together (simultaneous communication, SimCom, sign-supported speech) as a means of improving speech recognition, comprehension, and learning by cochlear implant users in noisy contexts. Methods Forty eight college students who were active cochlear implant users, watched videos of three short presentations, the text versions of which were standardized at the 8th grade reading level. One passage was presented in spoken language only, one was presented in spoken language with multi-talker babble background noise, and one was presented via simultaneous communication with the same background noise. Following each passage, participants responded to 10 (standardized) open-ended questions designed to assess comprehension. Indicators of participants’ spoken language and sign language skills were obtained via self-reports and objective assessments. Results When spoken materials were accompanied by signs, scores were significantly higher than when materials were spoken in noise without signs. Participants’ receptive spoken language skills significantly predicted scores in all three conditions; neither their receptive sign skills nor age of implantation predicted performance. Discussion Students who are cochlear implant users typically rely solely on spoken language in the classroom. The present results, however, suggest that there are potential benefits of simultaneous communication for such learners in noisy settings. For those cochlear implant users who know sign language, the redundancy of speech and signs potentially can offset the reduced fidelity of spoken language in noise. Conclusion Accompanying spoken language with signs can benefit learners who are cochlear implant users in noisy situations such as classroom settings. Factors associated with such benefits, such as receptive skills in signed and spoken modalities, classroom acoustics, and material difficulty need to be empirically examined. PMID:28010675

Simultaneous communication supports learning in noise by cochlear implant users.

PubMed

Blom, Helen; Marschark, Marc; Machmer, Elizabeth

2017-01-01

This study sought to evaluate the potential of using spoken language and signing together (simultaneous communication, SimCom, sign-supported speech) as a means of improving speech recognition, comprehension, and learning by cochlear implant (CI) users in noisy contexts. Forty eight college students who were active CI users, watched videos of three short presentations, the text versions of which were standardized at the 8 th -grade reading level. One passage was presented in spoken language only, one was presented in spoken language with multi-talker babble background noise, and one was presented via simultaneous communication with the same background noise. Following each passage, participants responded to 10 (standardized) open-ended questions designed to assess comprehension. Indicators of participants' spoken language and sign language skills were obtained via self-reports and objective assessments. When spoken materials were accompanied by signs, scores were significantly higher than when materials were spoken in noise without signs. Participants' receptive spoken language skills significantly predicted scores in all three conditions; neither their receptive sign skills nor age of implantation predicted performance. Students who are CI users typically rely solely on spoken language in the classroom. The present results, however, suggest that there are potential benefits of simultaneous communication for such learners in noisy settings. For those CI users who know sign language, the redundancy of speech and signs potentially can offset the reduced fidelity of spoken language in noise. Accompanying spoken language with signs can benefit learners who are CI users in noisy situations such as classroom settings. Factors associated with such benefits, such as receptive skills in signed and spoken modalities, classroom acoustics, and material difficulty need to be empirically examined.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hausladen, Paul; Blessinger, Christopher S; Guzzardo, Tyler

A complete understanding of both the steady state and transient background measured by Radiation Portal Monitors (RPMs) is essential to predictable system performance, as well as maximization of detection sensitivity. To facilitate this understanding, a test bed for the study of natural background in RPMs has been established at the Oak Ridge National Laboratory. This work was performed in support of the Second Line of Defense Program's mission to detect the illicit movement of nuclear material. In the present work, transient increases in gamma ray counting rates in RPMs due to rain are investigated. The increase in background activity associatedmore » with rain, which has been well documented in the field of environmental radioactivity, originates from the atmospheric deposition of two radioactive daughters of radon-222, namely lead-214 and bismuth-214 (henceforth {sup 222}Rn, {sup 214}Pb and {sup 214}Bi). In this study, rainfall rates recorded by a co-located weather station are compared with RPM count rates and High Purity Germanium spectra. The data verifies these radionuclides are responsible for the dominant transient natural background fluctuations in RPMs. Effects on system performance and potential mitigation strategies are discussed.« less

Bacteriological evaluation for one-and two-piece implant design supporting mandibular overdenture

PubMed Central

Abdelwahed, Ahmed; Mahrous, Ahmed I.; Abadallah, Mohamed Farouk; Asfour, Hani; Aldawash, Hussien A.; Alagha, Ebaa I.

2015-01-01

Background: This study evaluated and compared the bacteriological effect of two-piece implants and one-piece implants in complete overdenture cases on supporting structures. Materials and Methods: Ten male completely edentulous patients were selected and randomly divided into two equal groups according to the implant design and surgical technique for this study; Group 1: Patients were rehabilitated with complete mandibular overdenture supported by two-piece implants one on each side of the lower arch following two-stage surgical technique and Group 2: Patients were rehabilitated with complete mandibular overdenture supported by one-piece implants one on each side. Evaluation was made at the time of insertion, 6, 12, and 18 months after overdenture insertion, by measuring bacteriological changes around implants abutments. Results: Complete overdenture supported by one-piece implants showed better effect on the bacteriological changes as compared to that supported by two-piece implants. Conclusion: Complete overdenture supported by one-piece implants one on each side of the lower arch showed better effect on the bacteriological changes than using the same prosthesis supported by two-piece implants. PMID:26903697

Clinical supervision for nurses in administrative and leadership positions: a systematic literature review of the studies focusing on administrative clinical supervision.

PubMed

Sirola-Karvinen, Pirjo; Hyrkäs, Kristiina

2006-11-01

The aim of this systematic literature review was to describe administrative clinical supervision from the nursing leaders', directors' and administrators' perspective. Administrative clinical supervision is a timely and important topic as organizational structures in health care and nursing leadership are changing in addition to the increasing number of complex challenges present in health care. The material in this review was drawn from national and international databases including doctoral dissertations, distinguished thesis and peer-reviewed articles. The material was analysed by means of content analysis. The theoretical framework for the analysis was based on the three main functions of clinical supervision: administrative, educational and supportive. The findings demonstrated that the experiences of the administrative clinical supervision and its supportiveness were varying. The intervention was seen to provide versatility of learning experiences and support in challenging work experiences. Administrative clinical supervision effects and assures the quality of care. The effects as a means of development were explained through its resemblance to a leading specialist community. The findings support earlier perceptions concerning the importance and significance of administrative clinical supervision for nursing managers and administrators. However, more research is needed to develop administrative clinical supervision and to increase understanding of theoretical assumptions and relationships of the concepts on the background.

Plastic Polymers for Efficient DNA Microarray Hybridization: Application to Microbiological Diagnostics▿

PubMed Central

Zhao, Zhengshan; Peytavi, Régis; Diaz-Quijada, Gerardo A.; Picard, Francois J.; Huletsky, Ann; Leblanc, Éric; Frenette, Johanne; Boivin, Guy; Veres, Teodor; Dumoulin, Michel M.; Bergeron, Michel G.

2008-01-01

Fabrication of microarray devices using traditional glass slides is not easily adaptable to integration into microfluidic systems. There is thus a need for the development of polymeric materials showing a high hybridization signal-to-background ratio, enabling sensitive detection of microbial pathogens. We have developed such plastic supports suitable for highly sensitive DNA microarray hybridizations. The proof of concept of this microarray technology was done through the detection of four human respiratory viruses that were amplified and labeled with a fluorescent dye via a sensitive reverse transcriptase PCR (RT-PCR) assay. The performance of the microarray hybridization with plastic supports made of PMMA [poly(methylmethacrylate)]-VSUVT or Zeonor 1060R was compared to that with high-quality glass slide microarrays by using both passive and microfluidic hybridization systems. Specific hybridization signal-to-background ratios comparable to that obtained with high-quality commercial glass slides were achieved with both polymeric substrates. Microarray hybridizations demonstrated an analytical sensitivity equivalent to approximately 100 viral genome copies per RT-PCR, which is at least 100-fold higher than the sensitivities of previously reported DNA hybridizations on plastic supports. Testing of these plastic polymers using a microfluidic microarray hybridization platform also showed results that were comparable to those with glass supports. In conclusion, PMMA-VSUVT and Zeonor 1060R are both suitable for highly sensitive microarray hybridizations. PMID:18784318

Phonon induced magnetism in ionic materials

NASA Astrophysics Data System (ADS)

Restrepo, Oscar D.; Antolin, Nikolas; Jin, Hyungyu; Heremans, Joseph P.; Windl, Wolfgang

2014-03-01

Thermoelectric phenomena in magnetic materials create exciting possibilities in future spin caloritronic devices by manipulating spin information using heat. An accurate understanding of the spin-lattice interactions, i.e. the coupling between magnetic excitations (magnons) and lattice vibrations (phonons), holds the key to unraveling their underlying physics. We report ab initio frozen-phonon calculations of CsI that result in non-zero magnetization when the degeneracy between spin-up and spin-down electronic density of states is lifted for certain phonon displacement patterns. For those, the magnetization as a function of atomic displacement shows a sharp resonance due to the electronic states on the displaced Cs atoms, while the electrons on indium form a continuous background magnetization. We relate this resonance to the generation of a two-level system in the spin-polarized Cs partial density of states as a function of displacement, which we propose to be described by a simple resonant-susceptibility model. Current work extends these investigations to semiconductors such as InSb. ODR and WW are supported by the Center for Emergent Materials, an NSF MRSEC at OSU (Grant DMR-0820414).HJ and JPH are supported by AFOSR MURI Cryogenic Peltier Cooling, Contract #FA9550-10-1-0533.

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

10 CFR 73.28 - Security background checks for secure transfer of nuclear materials.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Security background checks for secure transfer of nuclear materials. 73.28 Section 73.28 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL PROTECTION OF PLANTS AND MATERIALS Physical Protection of Special Nuclear Material in Transit § 73.28 Security...

The status and initial results of the MAJORANA DEMONSTRATOR

NASA Astrophysics Data System (ADS)

Zhu, Xiaoyu; MAJORANA Collaboration

2017-01-01

The MAJORANA DEMONSTRATOR is an ultra-low background experiment searching for neutrinoless double-beta decay in 76Ge at the Sanford Underground Research Facility. The search for neutrinoless double-beta decay could determine the Dirac vs Majorana nature of neutrino mass and provide insight to the matter-antimatter asymmetry in the Universe. The DEMONSTRATOR is comprised of 44.8 kg (30 kg enriched in 76Ge) of high purity Ge detectors separated into two modules. Construction and commissioning of both modules completed in Summer 2016 and both modules are now acquiring physics data. In my talk, I will discuss the initial results of the first physics run utilizing both modules focusing primarily on the studies of the background and projections to a ton-scale experiment. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, the Particle Astrophysics Program of the National Science Foundation, and the Sanford Underground Research Facility. We acknowledge the support of the U.S. Department of Energy through the LANL/LDRD Program.

The low-energy program of the MAJORANA DEMONSTRATOR

NASA Astrophysics Data System (ADS)

Massarczyk, Ralph; MAJORANA Collaboration

2017-01-01

The MAJORANA Collaboration constructed an ultra-low background, modular high-purity Ge detector array to search for neutrinoless double-beta decay in 76Ge. Located at the 4850-ft level of the Sanford Underground Research Facility, the DEMONSTRATOR detector assembly has the goal to show that it is possible to achieve background rates necessary for future ton-scale experiments. The ultra-clean assembly in combination with low-noise p-type point contact detectors allows measurements with thresholds in the keV range. The talk will give an overview of the low-energy physics and recent achievements made since the completed DEMONSTRATOR array started data taking in mid 2016. Recent results from campaign will be presented, including new limits on bosonic dark matter interaction rates. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, the Particle Astrophysics Program of the National Science Foundation, and the Sanford Underground Research Facility. We acknowledge the support of the U.S. Department of Energy through the LANL/LDRD Program.

A framework for high-school teacher support in Geosciences

NASA Astrophysics Data System (ADS)

Bookhagen, B.; Mair, A.; Schaller, G.; Koeberl, C.

2012-04-01

To attract future geoscientists in the classroom and share the passion for science, successful geoscience education needs to combine modern educational tools with applied science. Previous outreach efforts suggest that classroom-geoscience teaching tremendously benefits from structured, prepared lesson plans in combination with hands-on material. Building on our past experience, we have developed a classroom-teaching kit that implements interdisciplinary exercises and modern geoscientific application to attract high-school students. This "Mobile Phone Teaching Kit" analyzes the components of mobile phones, emphasizing the mineral compositions and geologic background of raw materials. Also, as geoscience is not an obligatory classroom topic in Austria, and university training for upcoming science teachers barely covers geoscience, teacher training is necessary to enhance understanding of the interdisciplinary geosciences in the classroom. During the past year, we have held teacher workshops to help implementing the topic in the classroom, and to provide professional training for non-geoscientists and demonstrate proper usage of the teaching kit. The material kit is designed for classroom teaching and comes with a lesson plan that covers background knowledge and provides worksheets and can easily be adapted to school curricula. The project was funded by kulturkontakt Austria; expenses covered 540 material kits, and we reached out to approximately 90 schools throughout Austria and held a workshop in each of the nine federal states in Austria. Teachers received the training, a set of the material kit, and the lesson plan free of charge. Feedback from teachers was highly appreciative. The request for further material kits is high and we plan to expand the project. Ultimately, we hope to enlighten teachers and students for the highly interdisciplinary variety of geosciences and a link to everyday life.

Effects of space environment on structural materials

NASA Technical Reports Server (NTRS)

Miglionico, C.; Stein, C.; Roybal, R.; Robertson, R.; Murr, L. E.; Quinones, S.; Rivas, J.; Marquez, B.; Advani, A. H.; Fisher, W. W.

1992-01-01

A preliminary study of materials exposed in space in a low Earth orbit for nearly six years has revealed a wide range of micrometeorite or microparticle impact craters ranging in size from 1 to 1000 micron in diameter, debris particles from adjacent and distant materials systems, reaction products, and other growth features on the specimen surfaces, and related phenomena. The exposed surface features included fine grained and nearly amorphous materials as well as a large array of single crystal particles. A replication type, lift off technique was developed to remove reaction products and debris from the specimen surfaces in order to isolate them from the background substrate without creating microchemical or microstructural artifacts or alterations. This resulted in surface features resting on a carbon support film which was virtually invisible to observation by electron microscopy and nondispersive x ray analysis. Some evidence for blisters on leading edge aluminum alloy surfaces and a high surface region concentration of oxygen determined by Auger electron spectrometry suggests oxygen effects where fluences exceed 10(exp 21) atoms/sq cm.

Construction and Application of a Terahertz Scanning Near-Field Microscope for Study of Correlated Electron Materials at Cryogenic Temperatures and Nanometer Length Scales

NASA Astrophysics Data System (ADS)

Stinson, Harry Theodore, III

This dissertation describes the design and construction of the world's first cryogenic apertureless near-field microscope designed for terahertz sources and detectors. I first provide motivation for the creation of this instrument in the context of spectroscopy of correlated electron materials, and background information on the two techniques that the instrument combines, scanning near-field optical microscopy and terahertz time-domain spectroscopy. I then detail key components of the instrument design, including proof-of-principle results obtained at room and cryogenic temperatures. Following this, I discuss an imaging experiment performed with this instrument on vanadium dioxide, an insulator-metal transition material, which sheds new light on the nature of the phase transition and provides support for a new model Hamiltonian for the system. Finally, I discuss a theoretical proposal for the study of cuprate superconductors using this instrument.

Discrimination of Hydrovolcanic Tephras from Volcanic and Non-Volcanic Backgrounds in Hyperspectral Data of Pavant Butte and Tabernacle Hill, Utah: Relevance for Mars

NASA Technical Reports Server (NTRS)

Farrand, W. H.

2003-01-01

Water-magma, or ice-magma, interactions have long been theorized as an important process in the Martian geologic record [1-3]. The ability to unambiguously recognize tephra deposits and volcanic edifices produced by H2O-magma interactions is important for understanding the geologic history of Mars and for understanding the genesis of the major components of the Martian surface layer. Recognizing volcanic edifices produced by H2Omagma interactions on the basis of morphology alone is difficult.can be definitively identified as such. One means of providing supporting evidence for the identification of hydrovolcanic landforms and tephra deposits is through spectroscopy. Tephras produced by hydrovolcanic activity range from fresh basaltic glass (sideromelane) to glasses that have been completely altered to palagonite. A study of the visible through short-wave infrared (Vis-IR) reflectance of tephras composing tuff rings and tuff cones showed that the different stages of this alteration sequence have recognizable reflectance signatures [6,7]. However, the ability to recognize these different types of tephras against volcanic and nonvolcanic background materials has yet to be fully demonstrated. In this research, hyperspectral Vis-IR data over volcanic and hydrovolcanic terrains in the Black Rock Desert of Utah were analyzed in order to determine the separability of the component materials from volcanic and non-volcanic backgrounds.

Dynamic toughness in elastic nonlinear viscous solids

NASA Astrophysics Data System (ADS)

Tang, S.; Guo, T. F.; Cheng, L.

2009-02-01

This work addresses the interrelationship among dissipative mechanisms—material separation in the fracture process zone (FPZ), nonelastic deformation in the surrounding background material and kinetic energy—and how they affect the macroscopic dynamic fracture toughness as well as the limiting crack speed in strain rate sensitive materials. To this end, a micromechanics-based model for void growth in a nonlinear viscous solid is incorporated into a microporous strip of cell elements that forms the FPZ. The latter is surrounded by background material described by conventional constitutive relations. In the first part of the paper, the background material is assumed to be purely elastic. Here, the computed dynamic fracture toughness is a convex function of crack velocity. In the second part, the background material as well as the FPZ are described by similar rate-sensitivity parameters. Voids grow in the strain rate strengthened FPZ as the crack velocity increases. Consequently, the work of separation increases. By contrast, the inelastic dissipation in the background material appears to be a concave function of crack velocity. At the lower crack velocity regime, where dissipation in the background material is dominant, toughness decreases as crack velocity increases. At high crack velocities, inelastic deformation enhanced by the inertial force can cause a sharp increase in toughness. Here, the computed toughness increases rapidly with crack velocity. There exist regimes where the toughness is a non-monotonic function of the crack velocity. Two length scales—the width of the FPZ and the ratio of the shear wave speed to the reference strain rate—can be shown to strongly affect the dynamic fracture toughness. Our computational simulations can predict experimental data for fracture toughness vs. crack velocity reported in several studies for amorphous polymeric materials.

Rain-induced increase in background radiation detected by Radiation Portal Monitors.

PubMed

Livesay, R J; Blessinger, C S; Guzzardo, T F; Hausladen, P A

2014-11-01

A complete understanding of both the steady state and transient background measured by Radiation Portal Monitors (RPMs) is essential to predictable system performance, as well as maximization of detection sensitivity. To facilitate this understanding, a test bed for the study of natural background in RPMs has been established at the Oak Ridge National Laboratory. This work was performed in support of the Second Line of Defense Program's mission to enhance partner country capability to deter, detect, and interdict the illicit movement of special nuclear material. In the present work, transient increases in gamma-ray counting rates in RPMs due to rain are investigated. The increase in background activity associated with rain, which has been well documented in the field of environmental radioactivity, originates primarily from the wet-deposition of two radioactive daughters of (222)Rn, namely, (214)Pb and (214)Bi. In this study, rainfall rates recorded by a co-located weather station are compared with RPM count rates and high-purity germanium spectra. The data verify that these radionuclides are responsible for the largest environmental background fluctuations in RPMs. Analytical expressions for the detector response function in Poly-Vinyl Toluene have been derived. Effects on system performance and potential mitigation strategies are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

Promoting improved family caregiver health literacy: evaluation of caregiver communication resources.

PubMed

Wittenberg, Elaine; Goldsmith, Joy; Ferrell, Betty; Ragan, Sandra L

2017-07-01

Family caregivers of cancer patients have a vital role in facilitating and sharing information about cancer, revealing a need to develop caregiver health literacy skills to support caregiver communication. The goal of this study was to investigate caregiver print materials and develop and assess a new caregiver communication resource titled A Communication Guide for Caregivers TM . Using a model of six domains of caregiver health literacy skills, print cancer education materials were collected and evaluated for caregiver communication support. A new caregiver communication resource was also developed and assessed by caregivers and healthcare providers. Caregivers reviewed content and assessed utility, relatability, and reading quality. Healthcare providers also assessed whether the material would be understandable and usable for cancer caregivers. Only three of the 28 print materials evaluated were written at the recommended sixth grade reading level and only five addressed all six caregiver health literacy skills. Readability scores for A Communication Guide for Caregivers TM were at the sixth grade level, and caregivers reported its contents were relatable, useful, and easy to read. Healthcare providers also rated the material as easy for patient/family members of diverse backgrounds and varying levels of literacy to understand and use. Existing print-based caregiver education materials do not address caregivers' health literacy skill needs and are aimed at a highly literate caregiving population. A Communication Guide for Caregivers TM meets health literacy standards and family caregiver and provider communication needs. The findings are relevant for healthcare professionals who provide cancer education. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Specifications of the International Cooperation Administration for DDT water-dispersible powder for use in malaria control programmes

PubMed Central

Pearce, George W.; Gooden, E. L.; Johnson, Donald R.

1959-01-01

Background information is presented on the development of specifications for 75% DDT water-dispersible powder for use in malaria control programmes supported by the International Cooperation Administration (ICA) of the United States Government. Early difficulties with DDT powders used in these programmes were investigated and it was found that the most critical requirements involved packaging, suspensibility and storage stability. ICA specifications were evolved to meet these requirements. The suspensibility test developed is described, and the importance of inspection of the material procured is discussed. PMID:14431217

Review of Monte Carlo simulations for backgrounds from radioactivity

NASA Astrophysics Data System (ADS)

Selvi, Marco

2013-08-01

For all experiments dealing with the rare event searches (neutrino, dark matter, neutrino-less double-beta decay), the reduction of the radioactive background is one of the most important and difficult tasks. There are basically two types of background, electron recoils and nuclear recoils. The electron recoil background is mostly from the gamma rays through the radioactive decay. The nuclear recoil background is from neutrons from spontaneous fission, (α, n) reactions and muoninduced interactions (spallations, photo-nuclear and hadronic interaction). The external gammas and neutrons from the muons and laboratory environment, can be reduced by operating the detector at deep underground laboratories and by placing active or passive shield materials around the detector. The radioactivity of the detector materials also contributes to the background; in order to reduce it a careful screening campaign is mandatory to select highly radio-pure materials. In this review I present the status of current Monte Carlo simulations aimed to estimate and reproduce the background induced by gamma and neutron radioactivity of the materials and the shield of rare event search experiment. For the electromagnetic background a good level of agreement between the data and the MC simulation has been reached by the XENON100 and EDELWEISS experiments, using the GEANT4 toolkit. For the neutron background, a comparison between the yield of neutrons from spontaneous fission and (α, n) obtained with two dedicated softwares, SOURCES-4A and the one developed by Mei-Zhang-Hime, show a good overall agreement, with total yields within a factor 2 difference. The energy spectra from SOURCES-4A are in general smoother, while those from MZH presents sharp peaks. The neutron propagation through various materials has been studied with two MC codes, GEANT4 and MCNPX, showing a reasonably good agreement, inside 50% discrepancy.

Solid phase microextraction device using aerogel

DOEpatents

Miller, Fred S.; Andresen, Brian D.

2005-06-14

A sample collection substrate of aerogel and/or xerogel materials bound to a support structure is used as a solid phase microextraction (SPME) device. The xerogels and aerogels may be organic or inorganic and doped with metals or other compounds to target specific chemical analytes. The support structure is typically formed of a glass fiber or a metal wire (stainless steel or kovar). The devices are made by applying gel solution to the support structures and drying the solution to form aerogel or xerogel. Aerogel particles may be attached to the wet layer before drying to increase sample collection surface area. These devices are robust, stable in fields of high radiation, and highly effective at collecting gas and liquid samples while maintaining superior mechanical and thermal stability during routine use. Aerogel SPME devices are advantageous for use in GC/MS analyses due to their lack of interfering background and tolerance of GC thermal cycling.

Method for preparing a solid phase microextraction device using aerogel

DOEpatents

Miller, Fred S [Bethel Island, CA; Andresen, Brian D [Livermore, CA

2006-10-24

A sample collection substrate of aerogel and/or xerogel materials bound to a support structure is used as a solid phase microextraction (SPME) device. The xerogels and aerogels may be organic or inorganic and doped with metals or other compounds to target specific chemical analytes. The support structure is typically formed of a glass fiber or a metal wire (stainless steel or kovar). The devices are made by applying gel solution to the support structures and drying the solution to form aerogel or xerogel. Aerogel particles may be attached to the wet layer before drying to increase sample collection surface area. These devices are robust, stable in fields of high radiation, and highly effective at collecting gas and liquid samples while maintaining superior mechanical and thermal stability during routine use. Aerogel SPME devices are advantageous for use in GC/MS analyses due to their lack of interfering background and tolerance of GC thermal cycling.

Compact and lightweight support platform with electromagnetic disturbance elimination for interferometer on reversed field pinch Keda Torus eXperiment

NASA Astrophysics Data System (ADS)

Mao, Wenzhe; Yuan, Peng; Zheng, Jian; Ding, Weixing; Li, Hong; Lan, Tao; Liu, Adi; Liu, Wandong; Xie, Jinlin

2016-11-01

A compact and lightweight support platform has been used as a holder for the interferometer system on the Keda Torus eXperiment (KTX), which is a reversed field pinch device. The vibration caused by the interaction between the time-varying magnetic field and the induced current driven in the metal optical components has been measured and, following comparison with the mechanical vibration of the KTX device and the refraction effect of the ambient turbulent air flow, has been identified as the primary vibration source in this case. To eliminate this electromagnetic disturbance, nonmetallic epoxy resin has been selected as the material for the support platform and the commercially available metal optical mounts are replaced. Following these optimization steps and mechanical reinforcements, the stability of the interferometer platform has improved significantly. The phase shift caused by the vibration has been reduced to the level of background noise.

Survey of background scattering from materials found in small-angle neutron scattering.

PubMed

Barker, J G; Mildner, D F R

2015-08-01

Measurements and calculations of beam attenuation and background scattering for common materials placed in a neutron beam are presented over the temperature range of 300-700 K. Time-of-flight (TOF) measurements have also been made, to determine the fraction of the background that is either inelastic or quasi-elastic scattering as measured with a 3 He detector. Other background sources considered include double Bragg diffraction from windows or samples, scattering from gases, and phonon scattering from solids. Background from the residual air in detector vacuum vessels and scattering from the 3 He detector dome are presented. The thickness dependence of the multiple scattering correction for forward scattering from water is calculated. Inelastic phonon background scattering at small angles for crystalline solids is both modeled and compared with measurements. Methods of maximizing the signal-to-noise ratio by material selection, choice of sample thickness and wavelength, removal of inelastic background by TOF or Be filters, and removal of spin-flip scattering with polarized beam analysis are discussed.

Survey of background scattering from materials found in small-angle neutron scattering

PubMed Central

Barker, J. G.; Mildner, D. F. R.

2015-01-01

Measurements and calculations of beam attenuation and background scattering for common materials placed in a neutron beam are presented over the temperature range of 300–700 K. Time-of-flight (TOF) measurements have also been made, to determine the fraction of the background that is either inelastic or quasi-elastic scattering as measured with a 3He detector. Other background sources considered include double Bragg diffraction from windows or samples, scattering from gases, and phonon scattering from solids. Background from the residual air in detector vacuum vessels and scattering from the 3He detector dome are presented. The thickness dependence of the multiple scattering correction for forward scattering from water is calculated. Inelastic phonon background scattering at small angles for crystalline solids is both modeled and compared with measurements. Methods of maximizing the signal-to-noise ratio by material selection, choice of sample thickness and wavelength, removal of inelastic background by TOF or Be filters, and removal of spin-flip scattering with polarized beam analysis are discussed. PMID:26306088

Understandability of Patient Information Booklets for Patients with Cancer.

PubMed

Keinki, Christian; Zowalla, Richard; Wiesner, Martin; Koester, Marie Jolin; Huebner, Jutta

2018-06-01

The improvement of health literacy in general and the information of individual patient is a major concern of the German national cancer plan and similar initiatives in other western countries. The aim of our study was to assess the readability and understandability of information booklets for cancer patients available at German Web sites. A support vector machine (SVM) was used to discriminate between laymen- and expert-centric patient information booklets about nine most common tumor types. All booklets had to be available for free at the Internet. A total of 52 different patient booklets were downloaded and assessed. Overall, the assessment of all booklets showed that an understandability level L of 4.6 and therefore increased medical background knowledge is required to understand a random text selected from the sample. The assessed information booklets on cancer show very limited suitability for laymen. We were able to demonstrate that a medical background is necessary to understand the examined booklets. The current study highlights the need to create information material adjusted to the needs of laymen. Assessing understandability before publication, especially for laymen with low health literacy, could ensure the suitability and thus quality of the information material.

A method for Removing Surface Contamination on Ultra-pure Copper Spectrometer Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoppe, Eric W.; Seifert, Allen; Aalseth, Craig E.

Spectrometers for the lowest-level radiometric measurements require materials of extreme radiopurity. Measurements of rare nuclear decays, e.g. neutrinoless double-beta decay, can require construction and shielding materials with bulk radiopurity reaching one micro-Becquerel per kilogram or less. When such extreme material purity is achieved, surface contamination, particularly solid daughters in the natural radon decay chains, can become the limiting background. High-purity copper is an important material for ultra-low-background spectrometers and thus is the focus of this work. A method for removing surface contamination at very low levels without attacking the bulk material is described. An assay method using a low-background proportionalmore » counter made of the material under examination is employed, and the resulting preliminary result of achievable surface contamination levels is presented.« less

Infection as a Background to Safety: Source Material for Teaching.

ERIC Educational Resources Information Center

Wyatt, H. V.

1986-01-01

Offers selections from papers which illustrate accidents, epidemics, and bad practices which could be used as background material for lessons on laboratory safety. Advocates the need for instruction on pathogenicity and infectivity. (ML)

Lessons learned in preparing method 29 filters for compliance testing audits.

PubMed

Martz, R F; McCartney, J E; Bursey, J T; Riley, C E

2000-01-01

Companies conducting compliance testing are required to analyze audit samples at the time they collect and analyze the stack samples if audit samples are available. Eastern Research Group (ERG) provides technical support to the EPA's Emission Measurements Center's Stationary Source Audit Program (SSAP) for developing, preparing, and distributing performance evaluation samples and audit materials. These audit samples are requested via the regulatory Agency and include spiked audit materials for EPA Method 29-Metals Emissions from Stationary Sources, as well as other methods. To provide appropriate audit materials to federal, state, tribal, and local governments, as well as agencies performing environmental activities and conducting emission compliance tests, ERG has recently performed testing of blank filter materials and preparation of spiked filters for EPA Method 29. For sampling stationary sources using an EPA Method 29 sampling train, the use of filters without organic binders containing less than 1.3 microg/in.2 of each of the metals to be measured is required. Risk Assessment testing imposes even stricter requirements for clean filter background levels. Three vendor sources of quartz fiber filters were evaluated for background contamination to ensure that audit samples would be prepared using filters with the lowest metal background levels. A procedure was developed to test new filters, and a cleaning procedure was evaluated to see if a greater level of cleanliness could be achieved using an acid rinse with new filters. Background levels for filters supplied by different vendors and within lots of filters from the same vendor showed a wide variation, confirmed through contact with several analytical laboratories that frequently perform EPA Method 29 analyses. It has been necessary to repeat more than one compliance test because of suspect metals background contamination levels. An acid cleaning step produced improvement in contamination level, but the difference was not significant for most of the Method 29 target metals. As a result of our studies, we conclude: Filters for Method 29 testing should be purchased in lots as large as possible. Testing firms should pre-screen new boxes and/or new lots of filters used for Method 29 testing. Random analysis of three filters (top, middle, bottom of the box) from a new box of vendor filters before allowing them to be used in field tests is a prudent approach. A box of filters from a given vendor should be screened, and filters from this screened box should be used both for testing and as field blanks in each test scenario to provide the level of quality assurance required for stationary source testing.

Federal Guidance Report No. 5: Background Material for the Development of Radiation Protection Standards

EPA Pesticide Factsheets

This report contains background material used in the development of guidance for Federal agencies in respect to planning protective actions to reduce potential doses from radioactive fission products to the population.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Selvi, Marco

For all experiments dealing with the rare event searches (neutrino, dark matter, neutrino-less double-beta decay), the reduction of the radioactive background is one of the most important and difficult tasks. There are basically two types of background, electron recoils and nuclear recoils. The electron recoil background is mostly from the gamma rays through the radioactive decay. The nuclear recoil background is from neutrons from spontaneous fission, (α, n) reactions and muoninduced interactions (spallations, photo-nuclear and hadronic interaction). The external gammas and neutrons from the muons and laboratory environment, can be reduced by operating the detector at deep underground laboratories andmore » by placing active or passive shield materials around the detector. The radioactivity of the detector materials also contributes to the background; in order to reduce it a careful screening campaign is mandatory to select highly radio-pure materials. In this review I present the status of current Monte Carlo simulations aimed to estimate and reproduce the background induced by gamma and neutron radioactivity of the materials and the shield of rare event search experiment. For the electromagnetic background a good level of agreement between the data and the MC simulation has been reached by the XENON100 and EDELWEISS experiments, using the GEANT4 toolkit. For the neutron background, a comparison between the yield of neutrons from spontaneous fission and (α, n) obtained with two dedicated softwares, SOURCES-4A and the one developed by Mei-Zhang-Hime, show a good overall agreement, with total yields within a factor 2 difference. The energy spectra from SOURCES-4A are in general smoother, while those from MZH presents sharp peaks. The neutron propagation through various materials has been studied with two MC codes, GEANT4 and MCNPX, showing a reasonably good agreement, inside 50% discrepancy.« less

Variations in chondrogenesis of human bone marrow-derived mesenchymal stem cells in fibrin/alginate blended hydrogels

PubMed Central

Ma, Kun; Titan, Ashley L.; Stafford, Melissa; Zheng, Chun hua; Levenston, Marc E.

2012-01-01

Fibrin and alginate hydrogels have been widely used to support chondrogenesis of bone marrow-derived mesenchymal stem cells (BM-MSCs) for articular cartilage and fibrocartilage tissue engineering, with distinct advantages and disadvantages to each material. Attempting to produce a gel scaffold exhibiting beneficial characteristics of both materials, we fabricated fibrin/alginate blended hydrogels at various blend ratios and evaluated the gel morphology, mechanical properties and their support for BM-MSC chondrogenesis. Results show that when the fibrin/alginate ratio decreased, the fibrin architecture transitioned from uniform to interconnected fibrous and finally to disconnected islands against an alginate background, with opposing trends in the alginate architecture. Fibrin maintained gel extensibility and promoted cell proliferation, while alginate improved the gel biostability and better supported glycosaminoglycan and collagen II production and chondrogenic gene expression. Blended gels had physical and biological characteristics intermediate between fibrin and alginate. Of the blends examined, FA 40:8 (40 mg/mL fibrinogen blended with 8 mg/mL alginate) was found to be the most appropriate group for future studies on tension-driven BM-MSC fibrochondrogenesis. As BM-MSC differentiation appeared to vary between fibrin and alginate regions of blended scaffolds, this study also highlighted the potential to develop spatially heterogeneous tissues through manipulating the heterogeneity of scaffold composition. PMID:22750738

Carbon based sample supports and matrices for laser desorption/ ionization mass spectrometry.

PubMed

Rainer, Matthias; Najam-ul-Haq, Muhammad; Huck, Christian W; Vallant, Rainer M; Heigl, Nico; Hahn, Hans; Bakry, Rania; Bonn, Günther K

2007-01-01

Laser desorption/ionization mass spectrometry (LDI-MS) is a widespread and powerful technique for mass analysis allowing the soft ionization of molecules such as peptides, proteins and carbohydrates. In many applications, an energy absorbing matrix has to be added to the analytes in order to protect them from being fragmented by direct laser beam. LDI-MS in conjunction with matrix is commonly referred as matrix-assisted LDI (MALDI). One of the striking disadvantages of this method is the desorption of matrix molecules, which causes interferences originating from matrix background ions in lower mass range (< 1000 Da). This has been led to the development of a variety of different carbon based LDI sample supports, which are capable of absorbing laser light and simultaneously transfering energy to the analytes for desorption. Furthermore carbon containing sample supports are used as carrier materials for the specific binding and preconcentration of molecules out of complex samples. Their subsequent analysis with MALDI mass spectrometry allows performing studies in metabolomics and proteomics. Finally a thin layer of carbon significantly improves sensitivity concerning detection limit. Analytes in low femtomole and attomole range can be detected in this regard. In the present article, these aspects are reviewed from patents where nano-based carbon materials are comprehensively utilized.

Low-energy nuclear astrophysics studies at the Multicharged Ion Research Facility

NASA Astrophysics Data System (ADS)

Febbraro, Michael; Pain, Steven; Bannister, Mark; Deboer, Richard; Chipps, Kelly; Havener, Charles; Peters, Willan; Ummel, Chad; Smith, Michael; Temanson, Eli; Toomey, Rebecca; Walter, David

2017-09-01

As low-energy nuclear astrophysics progresses toward measuring reaction cross sections in the stellar burning regimes, a worldwide effort is underway to continue these measurements at underground laboratories to achieve the requisite ultra-low-background environment. These facilities are crucial for providing the required low-background environments to perform such measurements of astrophysical importance. While advances have been made in the use of accelerators underground, of equal importance is the detectors, high-current targets, and techniques required to perform such measurements. With these goals in mind, a newly established astrophysics beamline has been built at the Multicharged Ion Research Facility (MIRF) located at Oak Ridge National Laboratory. The unique capabilities of MIRF will be demonstrated through two recent low-energy above-ground measurements of the dominant s-process neutron source 13C(α,n)16O and associated beam-induced background source 13C(d,n)14N. This material is based upon work supported by the U.S. DOE, Office of Science, Office of Nuclear Physics. Research sponsored by the LDRD Program of ORNL, managed by UT-Battelle, LLC, for the U.S. DOE.

Eglin virtual range database for hardware-in-the-loop testing

NASA Astrophysics Data System (ADS)

Talele, Sunjay E.; Pickard, J. W., Jr.; Owens, Monte A.; Foster, Joseph; Watson, John S.; Amick, Mary Amenda; Anthony, Kenneth

1998-07-01

Realistic backgrounds are necessary to support high fidelity hardware-in-the-loop testing. Advanced avionics and weapon system sensors are driving the requirement for higher resolution imagery. The model-test-model philosophy being promoted by the T&E community is resulting in the need for backgrounds that are realistic or virtual representations of actual test areas. Combined, these requirements led to a major upgrade of the terrain database used for hardware-in-the-loop testing at the Guided Weapons Evaluation Facility (GWEF) at Eglin Air Force Base, Florida. This paper will describe the process used to generate the high-resolution (1-foot) database of ten sites totaling over 20 square kilometers of the Eglin range. this process involved generating digital elevation maps from stereo aerial imagery and classifying ground cover material using the spectral content. These databases were then optimized for real-time operation at 90 Hz.

Astrophysically Relevant Dipole Studies at WiPAL

NASA Astrophysics Data System (ADS)

Endrizzi, Douglass; Forest, Cary; Wallace, John; WiPAL Team

2015-11-01

A novel terrella experiment is being developed to immerse a dipole magnetic field in the large, unmagnetized, and fully ionized background plasma of WiPAL (Wisconsin Plasma Astrophysics Lab). This allows for a series of related experiments motivated by astrophysical processes, including (1) inward transport of plasma into a magnetosphere with focus on development of Kelvin-Helmholtz instabilities from boundary shear flow; (2) helicity injection and simulation of solar eruptive events via electrical breakdown along dipole field lines; (3) interaction of Coronal Mass Ejection-like flows with a target magnetosphere and dependence on background plasma pressure; (4) production of a centrifugally driven wind to study how dipolar magnetic topology changes as closed field lines open. A prototype has been developed and preliminary results will be presented. An overview of the final design and construction progress will be given. This material is based upon work supported by the NSF Graduate Research Fellowship Program.

Development of Guidelines and Resource Materials on Latin America for Use in Grades 1-12. Final Report.

ERIC Educational Resources Information Center

Gill, Clark C.; Conroy, William B.

The Latin America Project (1966-69) consisted of two phases: (1) completion of background studies and (2) preparation, field testing, and evaluation of instructional materials. Five background bulletins were prepared and distributed (See ED 012 832, ED 012 833, ED 012 365, ED 013 342, ED 022 781) and instructional materials organized around…

Weyl magnons in pyrochlore antiferromagnets with an all-in-all-out order

NASA Astrophysics Data System (ADS)

Jian, Shao-Kai; Nie, Wenxing

2018-03-01

We investigate topological magnon band crossings of pyrochlore antiferromagnets with all-in-all-out (AIAO) magnetic order. By general symmetry analysis and spin-wave theory, we show that pyrochlore materials with AIAO orders can host Weyl magnons under external magnetic fields or uniaxial strains. Under a small magnetic field, the magnon bands of the pyrochlore with AIAO background can feature two opposite-charged Weyl points, which is the minimal number of Weyl points realizable in quantum materials, and has not been experimentally observed so far. We further show that breathing pyrochlores with AIAO orders can exhibit Weyl magnons upon uniaxial strains. These findings apply to any pyrochlore material supporting AIAO orders, irrespective of the forms of interactions. Specifically, we show that the Weyl magnons are robust against direct (positive) Dzyaloshinskii-Moriya interactions. Because of the ubiquitous AIAO orders in pyrochlore magnets including R2Ir2O7 , and experimentally achievable external strain and magnetic field, our predictions provide a promising arena to witness the Weyl magnons in quantum magnets.

Alpha Background Discrimination in the MAJORANA DEMONSTRATOR

NASA Astrophysics Data System (ADS)

Gruszko, Julieta; Majorana Collaboration

2017-09-01

The Majorana Demonstrator (MJD) searches for neutrinoless double-beta decay of 76Ge using arrays of high-purity germanium detectors. If observed, this process would have implications for grand-unification and the predominance of matter over antimatter in the universe. A problematic background in such large granular detector arrays is posed by alpha particles. In MJD, potential background events that are consistent with energy-degraded alphas originating on the passivated detector surface have been observed. We have studied these events by scanning the passivated surface of a P-type point contact detector like those used in MJD with a collimated alpha source. We observe that surface alpha events exhibit high charge-trapping, with a significant fraction of the trapped charge being re-released slowly. This leads to both a reduced prompt signal and a measurable change in slope of the tail of a recorded pulse. In this contribution we discuss the characteristics of these events and the filter developed to identify the occurrence of this delayed charge recovery, allowing for the efficient rejection of passivated surface alpha events while retaining 99.8% of bulk events. We also discuss the impact of this filter on the sensitivity of MJD. This material is based upon work supported by the U.S. DOE, Office of Science, Office of Nuclear Phys., the Particle Astrophys. and Nuclear Phys. Programs of the NSF, and SURF. Additional support from the NSFGRFP under Grant No. 1256082.

Background research in support of the new grant proposal: Research consortium for X-ray topography on line X-19 at NSLS

NASA Astrophysics Data System (ADS)

Bilello, J. C.

1983-11-01

The status of the construction and installation of components of the synchrotron topography station is reported as well as progress in the development of hardware for interfacing and software for interactively controlling the 13 motors which automate the facility. Research focuses on the problem of X-ray optics and on techniques for applying topography to materials science. There is colaboration with other researchers in studying the nature of brittle fracture of refractory metals and in interpreting contact in the vicinity of crack tips.

Multispectral index for the remote detection of human skin signatures

NASA Astrophysics Data System (ADS)

Baranoski, Gladimir V. G.; Chen, Tenn F.

2015-07-01

We propose a multispectral index to assist the detection of human signatures in complex natural environments. Differently from previously proposed indices, it takes into account the spectral responses of human skin not only in the near infrared, but also in the visible region of the light spectrum. As a result, it can contribute to mitigate the chances of false alarms during time-critical search and rescue operations carried out in such environments. Our investigation is supported by the use of reflectance data measured for different skin specimens and natural materials such as sand, ocean water, melting snow, and forest vegetation. We believe that the observations reported in this work can be incorporated into the design of more effective procedures and devices for the differentiation of human targets from background materials commonly found in nature.

Computational Analysis of Intra-Ventricular Flow Pattern Under Partial and Full Support of BJUT-II VAD.

PubMed

Zhang, Qi; Gao, Bin; Chang, Yu

2017-02-27

BACKGROUND Partial support, as a novel support mode, has been widely applied in clinical practice and widely studied. However, the precise mechanism of partial support of LVAD in the intra-ventricular flow pattern is unclear. MATERIAL AND METHODS In this study, a patient-specific left ventricular geometric model was reconstructed based on CT data. The intra-ventricular flow pattern under 3 simulated conditions - "heart failure", "partial support", and "full support" - were simulated by using fluid-structure interaction (FSI). The blood flow pattern, wall shear stress (WSS), time-average wall shear stress (TAWSS), oscillatory shear index (OSI), and relative residence time (RRT) were calculated to evaluate the hemodynamic effects. RESULTS The results demonstrate that the intra-ventricular flow pattern is significantly changed by the support level of BJUT-II VAD. The intra-ventricular vortex was enhanced under partial support and was eliminated under full support, and the high OSI and RRT regions changed from the septum wall to the cardiac apex. CONCLUSIONS In brief, the support level of the BJUT-II VAD has significant effects on the intra-ventricular flow pattern. The partial support mode of BJUT-II VAD can enhance the intra-ventricular vortex, while the distribution of high OSI and RRT moved from the septum wall to the cardiac apex. Hence, the partial support mode of BJUT-II VAD can provide more benefit for intra-ventricular flow pattern.

Automotive Fuel Economy: A Technical Study and Curriculum Development Project. A Thesis Presented to the Faculty of the College of Education, Mankato State University.

ERIC Educational Resources Information Center

Ready, Kirk Lewis

Automotive fuel economy was the topic of a study during which technical and background information was gathered, curriculum materials were sought, and curricula were developed. Technical information came from written materials and actual mileage tests of selected factors. Background came from written materials, field trips, and building and…

Molecular differential diagnosis of follicular thyroid carcinoma and adenoma based on gene expression profiling by using formalin-fixed paraffin-embedded tissues

PubMed Central

2013-01-01

Background Differential diagnosis between malignant follicular thyroid cancer (FTC) and benign follicular thyroid adenoma (FTA) is a great challenge for even an experienced pathologist and requires special effort. Molecular markers may potentially support a differential diagnosis between FTC and FTA in postoperative specimens. The purpose of this study was to derive molecular support for differential post-operative diagnosis, in the form of a simple multigene mRNA-based classifier that would differentiate between FTC and FTA tissue samples. Methods A molecular classifier was created based on a combined analysis of two microarray datasets (using 66 thyroid samples). The performance of the classifier was assessed using an independent dataset comprising 71 formalin-fixed paraffin-embedded (FFPE) samples (31 FTC and 40 FTA), which were analysed by quantitative real-time PCR (qPCR). In addition, three other microarray datasets (62 samples) were used to confirm the utility of the classifier. Results Five of 8 genes selected from training datasets (ELMO1, EMCN, ITIH5, KCNAB1, SLCO2A1) were amplified by qPCR in FFPE material from an independent sample set. Three other genes did not amplify in FFPE material, probably due to low abundance. All 5 analysed genes were downregulated in FTC compared to FTA. The sensitivity and specificity of the 5-gene classifier tested on the FFPE dataset were 71% and 72%, respectively. Conclusions The proposed approach could support histopathological examination: 5-gene classifier may aid in molecular discrimination between FTC and FTA in FFPE material. PMID:24099521

Contribution to the beam plasma material interactions during material processing with TEA CO2 laser radiation

NASA Astrophysics Data System (ADS)

Jaschek, Rainer; Konrad, Peter E.; Mayerhofer, Roland; Bergmann, Hans W.; Bickel, Peter G.; Kowalewicz, Roland; Kuttenberger, Alfred; Christiansen, Jens

1995-03-01

The TEA-CO2-laser (transversely excited atmospheric pressure) is a tool for the pulsed processing of materials with peak power densities up to 1010 W/cm2 and a FWHM of 70 ns. The interaction between the laser beam, the surface of the work piece and the surrounding atmosphere as well as gas pressure and the formation of an induced plasma influences the response of the target. It was found that depending on the power density and the atmosphere the response can take two forms. (1) No target modification due to optical break through of the atmosphere and therefore shielding of the target (air pressure above 10 mbar, depending on the material). (2) Processing of materials (air pressure below 10 mbar, depending on the material) with melting of metallic surfaces (power density above 0.5 109 W/cm2), hole formation (power density of 5 109 W/cm2) and shock hardening (power density of 3.5 1010 W/cm2). All those phenomena are usually linked with the occurrence of laser supported combustion waves and laser supported detonation waves, respectively for which the mechanism is still not completely understood. The present paper shows how short time photography and spatial and temporal resolved spectroscopy can be used to better understand the various processes that occur during laser beam interaction. The spectra of titanium and aluminum are observed and correlated with the modification of the target. If the power density is high enough and the gas pressure above a material and gas composition specific threshold, the plasma radiation shows only spectral lines of the background atmosphere. If the gas pressure is below this threshold, a modification of the target surface (melting, evaporation and solid state transformation) with TEA-CO2- laser pulses is possible and the material specific spectra is observed. In some cases spatial and temporal resolved spectroscopy of a plasma allows the calculation of electron temperatures by comparison of two spectral lines.

ARC-1979-AC79-7090

NASA Image and Video Library

1979-07-10

P-21762 C This color picture of Ganymede in the region 30° S 180° W shows features as small as 6 kilometers (3.7 miles) across. Shown is a bright halo impact crater that shows the fresh material thrown out of the crater. In the background is bright grooved terrain that may be the result of shearing of the surface materials along fault planes. The dark background material is the ancient heavily cratered terrain--the oldest material preserved on the Ganymede surface.

Shopping Centers: Their Development and Impact on a Community.

ERIC Educational Resources Information Center

Berezowski, P. E.; And Others

Presenting extensive background material on the development of shopping centers, this paper includes elementary and junior high school outdoor education activities centering upon shopping center studies. Background material includes analysis of the following: shopping center types (architecture, regional location, etc); land use (guidelines for…

Background Materials for Chairman's Workshop. 5th Edition.

ERIC Educational Resources Information Center

Kimble, Gregory A.

Information for newly appointed heads of graduate departments of psychology is presented as background material for the 1974 Chairman's Workshop. Topics include the following: the budgetary situation, pressures for increased teaching loads, effects upon recruiting faculty, faculty morale, graduate and undergraduate student morale, the intellectual…

Radon daughter plate-out onto Teflon

NASA Astrophysics Data System (ADS)

Morrison, E. S.; Frels, T.; Miller, E. H.; Schnee, R. W.; Street, J.

2018-01-01

Radiopure materials for detector components in rare event searches may be contaminated after manufacturing with long-lived 210Pb produced by the decay of atmospheric radon. Charged radon daughters deposited on the surface or implanted in the bulk of detector materials have the potential to cause noticeable backgrounds within dark matter regions of interest. Understanding the mechanics governing these background signals is therefore a paramount concern in dark matter experiments in order to distinguish a real signal from internal detector backgrounds. Teflon (i.e. PTFE) is a specific material of interest because it makes up the walls of the inner detector of many liquid noble detectors such as the LUX-ZEPLIN experiment. The rate of radon daughter plate-out onto Teflon can be orders of magnitude larger than the plate-out rate onto other materials. Mitigation of plate-out onto Teflon and steel by proximity to other materials is demonstrated.

Polyhydroxyalkanoate-based natural synthetic hybrid copolymer films: A small-angle neutron scattering study

NASA Astrophysics Data System (ADS)

Foster, L. John R.; Knott, Robert; Sanguanchaipaiwong, Vorapat; Holden, Peter J.

2006-11-01

Polyhydroxyalkanoates have attracted attention as biodegradable alternatives to conventional thermoplastics and as biomaterials. Through modification of their biosynthesis using Pseudomonas oleovorans, we have manipulated the material properties of these biopolyesters and produced a natural-synthetic hybrid copolymer of polyhydroxyoctanoate- block-diethylene glycol (PHO- b-DEG). A mixture of PHO and PHO-DEG were solvent cast from analytical grade chloroform and analysed using small-angle neutron scattering. A scattering pattern, easily distinguished above the background, was displayed by the films with a diffraction ring at q∼0.12 Å -1. This narrow ring of intensity is suggestive of a highly ordered system. Analysis of the diffraction pattern supported this concept and showed a d-spacing of approximately 50 Å. In addition, conformation of the hybrid polymer chains can be manipulated to support their self-assembly into ordered microporous films.

Reduction of exposure to acrylamide: achievements, potential of optimization, and problems encountered from the perspectives of a Swiss enforcement laboratory.

PubMed

Grob, Koni

2005-01-01

The most important initiatives taken in Switzerland to reduce exposure of consumers to acrylamide are the separate sale of potatoes low in reducing sugars for roasting and frying, the optimization of the raw material and preparation of french fries, and campaigns to implement suitable preparation methods in the gastronomy and homes. Industry works on improving a range of other products. Although these measures can reduce high exposures by some 80%, they have little effect on the background exposure resulting from coffee, bread, and numerous other products for which no substantial improvement is in sight. At this stage, improvements should be achieved by supporting voluntary activity rather than legal limits. Committed and consistent risk communication is key, and the support of improvements presupposes innovative approaches.

Development of an underground HPGe array facility for ultra low radioactivity measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sala, E.; Kang, W. G.; Kim, Y. D.

Low Level Counting techniques using low background facilities are continuously under development to increase the possible sensitivity needed for rare physics events experiments. The CUP (Center for Underground Physics) group of IBS is developing, in collaboration with Canberra, a ultra low background instrument composed of two arrays facing each other with 7 HPGe detectors each. The low radioactive background of each detector has been evaluated and improved by the material selection of the detector components. Samples of all the building materials have been provided by the manufacturer and the contaminations had been measured using an optimized low background 100% HPGemore » with a dedicated shielding. The evaluation of the intrinsic background has been performed using MonteCarlo simulations and considering the contribution of each material with the measured contamination. To further reduce the background, the instrument will be placed in the new underground laboratory at YangYang exploiting the 700m mountain coverage and radon-free air supplying system. The array has been designed to perform various Ultra Low background measurements; the sensitivity we are expecting will allow not only low level measurements of Ra and Th contaminations in Copper or other usually pure materials, but also the search for rare decays. In particular some possible candidates and configurations to detect the 0νECEC (for example {sup 106}Cd and {sup 156}Dy) and rare β decays ({sup 96}Zr, {sup 180m}Ta , etc ) are under study.« less

Proposed chemical mechanismsManagement practices impacts soil nutrients and bacterial populations in backgrounding beef feedlot

USDA-ARS?s Scientific Manuscript database

Intensive beef backgrounding often accumulate manure born soil nutrients, microbes, and pharmaceuticals at different site locations. Unless properly managed, such waste materials can pollute surrounding soil and water sources. Soil sampling from these sites helps determining waste material levels bu...

WOW! The Wonders of Wetlands: An Educator's Guide. [Revised.

ERIC Educational Resources Information Center

Slattery, Britt Eckhardt; And Others

This educator's guide contains background material and stimulating activities pertaining to wetlands that classroom teachers, refuge managers, nature center interpreters, park service educators, and others will find useful. The first part, background material for teachers preparing wetland study units, is divided into six chapters: "Wetlands and…

Multispectral infrared target detection: phenomenology and modeling

NASA Astrophysics Data System (ADS)

Cederquist, Jack N.; Rogne, Timothy J.; Schwartz, Craig R.

1993-10-01

Many targets of interest provide only very small signature differences from the clutter background. The ability to detect these small difference targets should be improved by using data which is diverse in space, time, wavelength or some other observable. Target materials often differ from background materials in the variation of their reflectance or emittance with wavelength. A multispectral sensor is therefore considered as a means to improve detection of small signal targets. If this sensor operates in the thermal infrared, it will not need solar illumination and will be useful at night as well as during the day. An understanding of the phenomenology of the spectral properties of materials and an ability to model and simulate target and clutter signatures is needed to understand potential target detection performance from multispectral infrared sensor data. Spectral variations in material emittance are due to vibrational energy transitions in molecular bonds. The spectral emittances of many materials of interest have been measured. Examples are vegetation, soil, construction and road materials, and paints. A multispectral infrared signature model has been developed which includes target and background temperature and emissivity, sky, sun, cloud and background irradiance, multiple reflection effects, path radiance, and atmospheric attenuation. This model can be used to predict multispectral infrared signatures for small signal targets.

Evaluation of ultra-low background materials for uranium and thorium using ICP-MS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoppe, E. W.; Overman, N. R.; LaFerriere, B. D.

2013-08-08

An increasing number of physics experiments require low background materials for their construction. The presence of Uranium and Thorium and their progeny in these materials present a variety of unwanted background sources for these experiments. The sensitivity of the experiments continues to drive the necessary levels of detection ever lower as well. This requirement for greater sensitivity has rendered direct radioassay impractical in many cases requiring large quantities of material, frequently many kilograms, and prolonged counting times, often months. Other assay techniques have been employed such as Neutron Activation Analysis but this requires access to expensive facilities and instrumentation andmore » can be further complicated and delayed by the formation of unwanted radionuclides. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a useful tool and recent advancements have increased the sensitivity particularly in the elemental high mass range of U and Th. Unlike direct radioassay, ICP-MS is a destructive technique since it requires the sample to be in liquid form which is aspirated into a high temperature plasma. But it benefits in that it usually requires a very small sample, typically about a gram. This paper discusses how a variety of low background materials such as copper, polymers, and fused silica are made amenable to ICP-MS assay and how the arduous task of maintaining low backgrounds of U and Th is achieved.« less

Evaluation of Ultra-Low Background Materials for Uranium and Thorium Using ICP-MS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoppe, Eric W.; Overman, Nicole R.; LaFerriere, Brian D.

2013-08-08

An increasing number of physics experiments require low background materials for their construction. The presence of Uranium and Thorium and their progeny in these materials present a variety of unwanted background sources for these experiments. The sensitivity of the experiments continues to drive the necessary levels of detection ever lower as well. This requirement for greater sensitivity has rendered direct radioassay impractical in many cases requiring large quantities of material, frequently many kilograms, and prolonged counting times, often months. Other assay techniques have been employed such as Neutron Activation Analysis but this requires access to expensive facilities and instrumentation andmore » can be further complicated and delayed by the formation of unwanted radionuclides. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a useful tool and recent advancements have increased the sensitivity particularly in the elemental high mass range of U and Th. Unlike direct radioassay, ICP-MS is a destructive technique since it requires the sample to be in liquid form which is aspirated into a high temperature plasma. But it benefits in that it usually requires a very small sample, typically about a gram. Here we will discuss how a variety of low background materials such as copper, polymers, and fused silica are made amenable to ICP-MS assay and how the arduous task of maintaining low backgrounds of U and Th is achieved.« less

Lessons learned while developing, adapting and implementing a pilot parent-mediated behavioural intervention for children with autism spectrum disorder in rural Bangladesh.

PubMed

Blake, Jasmine M; Rubenstein, Eric; Tsai, Peng-Chou; Rahman, Hafizur; Rieth, Sarah R; Ali, Hasmot; Lee, Li-Ching

2017-07-01

Low- and middle-income countries often have limited resources, underdeveloped health systems and scarce knowledge of autism spectrum disorder. The objectives of this preliminary study were to develop and adapt intervention materials and to train a native clinician to implement a community-based parent-mediated behavioural intervention in rural Gaibandha, Bangladesh. Intervention materials to support parents' use of behavioural strategies were developed and refined by US behavioural intervention experts and Bangladesh field experts. Study investigators trained a native child psychologist in developmental milestones and behavioural intervention techniques. The native clinician delivered a 1-day group education session attended by 10 families of children aged 7-9 years with autism spectrum disorder, followed by two one-on-one training sessions with each family to train and practice individualized strategies for targeted challenging behaviours. Preliminary qualitative results indicate the importance of materials that are culturally appropriate and at an adequate literacy level. All families expressed strong desires to have learned the behavioural strategies when their child was younger and vocalized their need for further support and tools to help their children. This study is a preliminary step to creating sustainable and low-cost autism spectrum disorder interventions in rural Bangladesh, and possibly for families in regions with similar cultural and socioeconomic status backgrounds.

Nurses’experiences of perceived support and their contributing factors: A qualitative content analysis

PubMed Central

Sodeify, Roghieh; Vanaki, Zohreh; Mohammadi, Eesa

2013-01-01

Background: Following professional standards is the main concern of all managers in organizations. The functions of nurses are essential for both productivity and improving health organizations. In human resources management, supporting nursing profession is of ultimate importance. However, nurses’ experiences of perceived support, which are affected by various factors in workplace, have not been clearly explained yet. Thus, this study aimed to explain nurses’ experiences of perceived support and their contributing factors. Materials and Methods: This study is a qualitative research in which 12 nurses were selected through purposive sampling among nurses in university hospitals affiliated to University of Medical Sciences, Urmia, Iran, during 2011-2012. Data collection was conducted through deep interviews with semi-structural questions. All interviews were first recorded and then transcribed. Finally, data were analyzed through conventional content analysis. Results: The four main themes indicated that nurses experienced their workplace as non-supportive. Themes such as poor organizational climate, low social dignity, poor work conditions, and managers’ ignorance to individual and professional values were considered as inhibitory factors to support. Conclusion: Nursing managers can promote nurses’ positive support perceptions through recognizing inhibitory factors and applying fair solutions and take benefits of their positive consequences including high efficacy, self-esteem, and organizational commitment to promote the quality of care. PMID:23983753

COST-EFFECTIVE METHOD FOR PRODUCING SELF SUPPORTED PALLADIUM ALLOY MEMBRANES FOR USE IN EFFICIENT PRODUCTION OF COAL DERIVED HYDROGEN

DOE Office of Scientific and Technical Information (OSTI.GOV)

B. Lanning; J. Arps

2004-04-01

Extending upon development efforts last quarter to produce ''free-standing'', copper and palladium alloy films, the goal this quarter has been to produce pinhole-free, Pd-Cu alloy films up to 5 x 5 inches in area (1-3 microns thick) using both magnetron sputtering and e-beam evaporation on PVA (Solublon) and polystyrene backing materials. A set of experiments were conducted to assess processing methods/solutions chemistry for removing the polymer backing material from the Pd-Cu film. For all of the alloy films produced to this point, we were unable to produce pinhole-free films on plastic although we were able to produce free-standing Pd-Cu filmsmore » at less than 0.5 microns thick with minimal intrinsic stress. Subsequently, to evaluate gas permeation and leakage across the films, two films were sandwiched together on top of a porous Monel support disc (25 mm in diameter) and then tested in a leak test apparatus. Using two Cu films (10 micron thickness total) in the sandwich configuration, leak rates were about 20% of the background leak rate.« less

Support in Clinical Settings as Perceived by Nursing Students in Iran: A Qualitative Study

PubMed Central

Joolaee, Soodabeh; Ashghali Farahani, Mansoureh; Jafarian Amiri, Seyedeh Roghayeh; Varaei, Shokoh

2016-01-01

Background Although support is one of the most substantial needs of nursing students during clinical education, it is not clearly defined in the literature. Objectives The current study aimed to explore the concept of support in clinical settings as perceived by nursing students. Materials and Methods A qualitative content analysis was used to explore the meaning of student support in clinical settings. A purposive sampling with maximum variation was used to select the participants among bachelor nursing students in the nursing school of Babol University of Medical Sciences in the north of Iran. Semi-structured interviews were conducted to gather the perceptions and experiences of seventeen nursing students. Conventional content analysis was applied to analyze the data. Results In the current study, the main theme, nurturance, was emerged with seven subthemes of humanistic behavior with the student, respectful communication with students, accepting the student in the clinical setting, sustaining confidence, need based supervision, accepting the profession in the society and empowerment. Conclusions Nursing students support in the clinical education requires a nurturing care; a care that leads to the sense of worthiness and respectability in students and contributes to the improvement of their clinical abilities. PMID:27331057

Leak-Before-Break: Further developments in regulatory policies and supporting research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkowski, G.M.; Chao, K.-S.

1990-02-01

The fourth in a series of international Leak-Before-Break (LBB) Seminars supported in part by the US Nuclear Regulatory Commission was held at the National Central Library in Taipei, Taiwan on May 11 and 12, 1989. The seminar updated the international polices and supporting research on LBB. Attendees included representatives from regulatory agencies, electric utilities, nuclear power plant fabricators, research organizations, and academic institutions. Regulatory policy was the subject of presentations by Mr. G. Arlotto (US NRC, USA) Dr. B. Jarman (AECB, Canada), Dr.P. Milella (ENEA-DISP, Italy), Dr. C. Faidy (EDF/Septen, France ), and Dr. K. Takumi (NUPEC, Japan). A papermore » by Mr. K. Wichman and Mr. A. Lee of the US NRC Office of Nuclear Reactor Regulation is included as background material to these proceedings; it discusses the history and status of LBB applications in US nuclear power plants. In addition, several papers on the supporting research programs described regulatory policy or industry standards for flaw evaluations, e.g., the ASME Section XI code procedures. Supporting research programs were reviewed on the first and second day by several participants from Taiwan, US, Japan, Canada, Italy, and France. Each individual paper has been cataloged separately.« less

Compassion fatigue and burnout in Iranian nurses: The role of perceived social support

PubMed Central

Ariapooran, Saeed

2014-01-01

Background: Nurses are at risk for symptoms of compassion fatigue (CF) and burnout (BO). Social support plays an important role in predicting CF and BO. This study was performed to determine the prevalence of the symptoms of CF and BO and the role of perceived social support in predicting these symptoms in Iranian nurses. Materials and Methods: Using a correlational descriptive survey research design, we selected 173 participants among the nurses working in public hospitals of Malayer, Iran. Professional Quality of Life (CF and BO subscales) and Multidimensional Scale of Perceived Social Support (MSPSS) were used for collecting the data. Results: The obtained results indicated that the prevalence of CF and BO symptoms was 45.3% and 15.03%, respectively, in Iranian nurses. Social support (significant other, family, and friends) was negatively correlated to BO (P < 0.01). Also, there was a negative correlation between social support from family and CF (P < 0.01). According to hierarchical multiple regressions, social support from family was the significant predictor to CF (P < 0.005) and BO (P < 0.001) in nurses. Conclusions: Based on the obtained results, some nurses (especially emergency nurses) are at risk for CF and BO and social support negatively correlated to CF and BO in Iranian nurses. It is necessary to develop support systems for nurses who are at risk for CF and BO. PMID:24949067

Thermal test of the insulation structure for LH 2 tank by using the large experimental apparatus

NASA Astrophysics Data System (ADS)

Kamiya, S.; Onishi, K.; Konshima, N.; Nishigaki, K.

Conceptual designs of large mass LH 2 (liquid hydrogen) storage systems, whose capacity is 50,000 m3, have been studied in the Japanese hydrogen project, World Energy Network (WE-NET) [K. Fukuda, in: WE-NET Hydrogen Energy Symposium, 1999, P1-P41]. This study has concluded that their thermal insulation structures for the huge LH 2 tanks should be developed. Their actual insulation structures comprise not only the insulation material but also reinforced members and joints. To evaluate their thermal performance correctly, a large test specimen including reinforced members and joints will be necessary. After verifying the thermal performance of a developed large experimental apparatus [S. Kamiya, Cryogenics 40 (1) (2000) 35] for measuring the thermal conductance of various insulation structures, we tested two specimens, a vacuum multilayer insulation (MLI) with a glass fiber reinforced plastic (GFRP) support and a vacuum solid insulation (microtherm ®) with joints. The thermal background test for verifying the thermal design of the experimental apparatus showed that the background heat leak is 0.1 W, small enough to satisfy apparatus performance requirement. The thermal conductance measurements of specimens also showed that thermal heat fluxes of MLI with a GFRP support and microtherm ® are 8 and 5.4 W/m2, respectively.

PEN as self-vetoing structural material

NASA Astrophysics Data System (ADS)

Majorovits, B.; Eck, S.; Fischer, F.; Gooch, C.; Hayward, C.; Kraetzschmar, T.; van der Kolk, N.; Muenstermann, D.; Schulz, O.; Simon, F.

2018-01-01

Polyethylene Naphtalate (PEN) is a mechanically very favorable polymer. Earlier it was found that thin foils made from PEN can have very high radio-purity compared to other commercially available foils. In fact, PEN is already in use for low background signal transmission applications (cables). Recently it has been realized that PEN also has favorable scintillating properties. In combination, this makes PEN a very promising candidate as a self-vetoing structural material in low background experiments. Components instrumented with light detectors could be built from PEN. This includes detector holders, detector containments, signal transmission links, etc. The current R&D towards qualification of PEN as a self-vetoing low background structural material is be presented.

Expected background in the LZ experiment

NASA Astrophysics Data System (ADS)

Kudryavtsev, Vitaly A.

2015-08-01

The LZ experiment, featuring a 7-tonne active liquid xenon target, is aimed at achieving unprecedented sensitivity to WIMPs with the background expected to be dominated by astrophysical neutrinos. To reach this goal, extensive simulations are carried out to accurately calculate the electron recoil and nuclear recoil rates in the detector. Both internal (from target material) and external (from detector components and surrounding environment) backgrounds are considered. A very efficient suppression of background rate is achieved with an outer liquid scintillator veto, liquid xenon skin and fiducialisation. Based on the current measurements of radioactivity of different materials, it is shown that LZ can achieve the reduction of a total background for a WIMP search down to about 2 events in 1000 live days for 5.6 tonne fiducial mass.

Common Sense or Gun Control? Political Communication and News Media Framing of Firearm Sale Background Checks after Newtown.

PubMed

McGinty, Emma E; Wolfson, Julia A; Sell, Tara Kirk; Webster, Daniel W

2016-02-01

Gun violence is a critical public health problem in the United States, but it is rarely at the top of the public policy agenda. The 2012 mass shooting in Newtown, Connecticut, opened a rare window of opportunity to strengthen firearm policies in the United States. In this study, we examine the American public's exposure to competing arguments for and against federal- and state-level universal background check laws, which would require a background check prior to every firearm sale, in a large sample of national and regional news stories (n = 486) published in the year following the Newtown shooting. Competing messages about background check laws could influence the outcome of policy debates by shifting support and political engagement among key constituencies such as gun owners and conservatives. We found that news media messages in support of universal background checks were fact-based and used rational arguments, and opposing messages often used rights-based frames designed to activate the core values of politically engaged gun owners. Reframing supportive messages about background check policies to align with gun owners' and conservatives' core values could be a promising strategy to increase these groups' willingness to vocalize their support for expanding background checks for firearm sales. Copyright © 2016 by Duke University Press.

Development and testing of culturally sensitive patient information material for Turkish, Polish, Russian and Italian migrants with depression or chronic low back pain (KULTINFO): study protocol for a double-blind randomized controlled trial.

PubMed

Hölzel, Lars P; Ries, Zivile; Zill, Jördis M; Kriston, Levente; Dirmaier, Jörg; Härter, Martin; Bermejo, Isaac

2014-07-04

Many of the approximately 15 million people with a migration background living in Germany (19% of the population) are inadequately reached by existing healthcare provision. In the literature, the necessity for cultural adaptation of information material for patients with a migration background is often cited as a measure for improving healthcare.In this study, culturally sensitive information material will be developed and evaluated for patients with a migration background and depression or chronic low back pain. In this respect, it will be examined whether culturally sensitive information material is judged as more useful by the patients than standard translated patient information without cultural adaptation. The implementation and evaluation of culturally sensitive patient information material will occur in the framework of a double-blind randomized controlled parallel-group study in four study centres in Germany. Primary care patients with a Turkish, Polish, Russian or Italian migration background with a diagnosis of depressive disorder or chronic low back pain will be included and randomly allocated to the intervention group or the control group. In the intervention group, culturally sensitive patient information will be handed to the patient at the end of the physician consultation, while in the control group, standard translated patient information material will be provided. The patients will be surveyed by means of questionnaires following the consultation as well as after 8 weeks and 6 months. In addition to the primary outcome (subjective usefulness), several patient- and physician-rated secondary outcomes will be considered. The study will provide an empirical answer to the question of whether persons with a migration background perceive culturally sensitive patient information material as more useful than translated information material without cultural adaptation. Deutsches Register Klinischer Studien (DRKS-ID) DRKS00004241 and Universal Trial Number (UTN) U1111-1135-8043.

Ghana. Part One-Class Materials. Development Studies No. 1, Third Impression.

ERIC Educational Resources Information Center

Jones, Paula; Bourne, Fay

Background readings and classroom materials dealing with Ghana for use with secondary and college students are provided in this publication. The major historical, social, geographical, and political aspects which have contributed to the present day development of Ghana are examined. The background readings for teachers which comprise section one…

Unity in Diversity: History and Religion in Indonesia.

ERIC Educational Resources Information Center

Jones, Bruce William

This paper, intended as lecture material for university students or as background material for teachers of social studies and world history, assumes that students already have some knowledge about the origins, practices, and beliefs of Islam, but that they have no prior background about Indonesia or its history. The paper describes the diversity…

Report to the State Department of Education Task Force on Migrant Education.

ERIC Educational Resources Information Center

Rollason, Wendell N.

The report presents Redlands Christian Migrant Association's (RCMA's) position on Florida's Migrant Education Program, the program changes sought by RCMA, and background and back-up materials. The packet of materials includes brief discussions of the background and reactivation of the Task Force on Migrant Education; State Board of Education…

Imagine the Universe: The Hidden Lives of Galaxies

NASA Technical Reports Server (NTRS)

Lochner, James C.; Williamson, Lisa; Fitzhugh, Ethel

2000-01-01

Welcome to the fourth in a series of posters and activity booklets produced in conjunction with the Imagine the Universe! web site. The poster/booklet sets are intended to provide additional curriculum support materials for some of the subjects presented in the web site. The information provided for the educator in the booklet is meant to give the necessary background information so that the topic can be taught confidently to the students. The activities can be used to engage and excite students about the topic of galaxies in a number of disciplines and ways. The booklet and all activities can be photocopied and distributed for educational, non-commercial purposes.

DiMES PMI research at DIII-D in support of ITER and beyond

DOE PAGES

Rudakov, Dimitry L.; Abrams, Tyler; Ding, Rui; ...

2017-03-27

An overview of recent Plasma-Material Interactions (PMI) research at the DIII-D tokamak using the Divertor Material Evaluation System (DiMES) is presented. The DiMES manipulator allows for exposure of material samples in the lower divertor of DIII-D under well-diagnosed ITER-relevant plasma conditions. Plasma parameters during the exposures are characterized by an extensive diagnostic suite including a number of spectroscopic diagnostics, Langmuir probes, IR imaging, and Divertor Thomson Scattering. Post-mortem measurements of net erosion/deposition on the samples are done by Ion Beam Analysis, and results are modelled by the ERO and REDEP/WBC codes with plasma background reproduced by OEDGE/DIVIMP modelling based onmore » experimental inputs. This article highlights experiments studying sputtering erosion, re-deposition and migration of high-Z elements, mostly tungsten and molybdenum, as well as some alternative materials. Results are generally encouraging for use of high-Z PFCs in ITER and beyond, showing high redeposition and reduced net sputter erosion. Two methods of high-Z PFC surface erosion control, with (i) external electrical biasing and (ii) local gas injection, are also discussed. Furthermore, these techniques may find applications in the future devices.« less

Global modeling of wall material migration following boronization in NSTX-U

NASA Astrophysics Data System (ADS)

Nichols, J. H.; Jaworski, M. A.; Skinner, C. H.; Bedoya, F.; Scotti, F.; Soukhanovskii, V. A.; Schmid, K.

2017-10-01

NSTX-U operated in 2016 with graphite plasma facing components, periodically conditioned with boron to improve plasma performance. Following each boronization, spectroscopic diagnostics generally observed a decrease in oxygen influx from the walls, and an in-vacuo material probe (MAPP) observed a corresponding decrease in surface oxygen concentration at the lower divertor. However, oxygen levels tended to return to a pre-boronization state following repeated plasma exposure. This behavior is interpretively modeled using the WallDYN mixed-material migration code, which couples local erosion and deposition processes with plasma impurity transport in a non-iterative, self-consistent manner that maintains overall material balance. A spatially inhomogenous model of the thin films produced by the boronization process is presented. Plasma backgrounds representative of NSTX-U conditions are reconstructed from a combination of NSTX-U and NSTX datasets. Low-power NSTX-U fiducial discharges, which led to less apparent surface degradation than normal operations, are also modeled with WallDYN. Likely mechanisms driving the observed evolution of surface oxygen are examined, as well as remaining discrepancies between model and experiment and potential improvements to the model. Work supported by US DOE contract DE-AC02-09CH11466.

Magnetic Modeling of a Rotating Flux Concentrator System Designed to Mitigate Noise in Large Magnetic Sensors

DTIC Science & Technology

2010-09-01

region were defined as a background. The flux concentrators were drawn as solid pieces and assigned the material properties of permalloy ( NiFe ), with...assigning properties (coercivity, permeability, etc.) to the objects, assigning boundaries or sources, seeding the objects and creating a mesh, and then...a permeability of 5000 as that is a value readily achieved in this material. The material properties assigned to this background are those of a

Use of UV Sources for Detection and Identification of Explosives

NASA Technical Reports Server (NTRS)

Hug, William; Reid, Ray; Bhartia, Rohit; Lane, Arthur

2009-01-01

Measurement of Raman and native fluorescence emission using ultraviolet (UV) sources (<400 nm) on targeted materials is suitable for both sensitive detection and accurate identification of explosive materials. When the UV emission data are analyzed using a combination of Principal Component Analysis (PCA) and cluster analysis, chemicals and biological samples can be differentiated based on the geometric arrangement of molecules, the number of repeating aromatic rings, associated functional groups (nitrogen, sulfur, hydroxyl, and methyl), microbial life cycles (spores vs. vegetative cells), and the number of conjugated bonds. Explosive materials can be separated from one another as well as from a range of possible background materials, which includes microbes, car doors, motor oil, and fingerprints on car doors, etc. Many explosives are comprised of similar atomic constituents found in potential background samples such as fingerprint oils/skin, motor oil, and soil. This technique is sensitive to chemical bonds between the elements that lead to the discriminating separability between backgrounds and explosive materials.

Study protocol: The Technology-Enhanced Coaching (TEC) program to improve diabetes outcomes – A randomized controlled trial

PubMed Central

Heisler, Michele; Mase, Rebecca; Brown, Brianne; Wilson, Shayla; Reeves, Pamela J.

2017-01-01

Background Racial and ethnic minority adults with diabetes living in under-resourced communities face multiple barriers to sustaining self-management behaviors necessary to improve diabetes outcomes. Peer support and decision support tools each have been associated with improved diabetes outcomes. Methods 289 primarily African American adults with poor glycemic control will be recruited from the Detroit Veteran’s Administration Hospital and randomized to Technology-Enhanced Coaching (TEC) or Peer Coaching alone. Participants in both arms will be assigned a peer coach trained in autonomy-supportive approaches. Coaches are diabetes patients with prior poor glycemic control who now have good control. All participants meet face-to-face initially with their coach to review diabetes education materials and develop an action plan. Educational materials in the TEC arm are delivered via a web-based, educational tool tailored with each participant’s personalized health data (iDecide). Over the next six months, Coaches call their assigned participants once a week to provide support for weekly action steps. Data are also collected on an Observational Control group with no contact with study staff. Changes in A1c, blood pressure, other patient-centered outcomes and mediators and moderators of intervention effects will be assessed. Discussion Tailored e-Health tools with educational content may enhance the effectiveness of peer coaching programs to better prepare patients to set self-management goals, identify action plans, and discuss treatment options with their health care providers. The study will provide insights for scalable self-management support programs for diabetes and chronic illnesses that require high levels of sustained patient self-management. PMID:28132876

Investigation of Polyurea-Crosslinked Silica Aerogels as a Neuronal Scaffold: A Pilot Study

PubMed Central

Sabri, Firouzeh; Cole, Judith A.; Scarbrough, Michael C.; Leventis, Nicholas

2012-01-01

Background Polymer crosslinked aerogels are an attractive class of materials for future implant applications particularly as a biomaterial for the support of nerve growth. The low density and nano-porous structure of this material combined with large surface area, high mechanical strength, and tunable surface properties, make aerogels materials with a high potential in aiding repair of injuries of the peripheral nervous system. However, the interaction of neurons with aerogels remains to be investigated. Methodology In this work the attachment and growth of neurons on clear polyurea crosslinked silica aerogels (PCSA) coated with: poly-L-lysine, basement membrane extract (BME), and laminin1 was investigated by means of optical and scanning electron microscopy. After comparing the attachment and growth capability of neurons on these different coatings, laminin1 and BME were chosen for nerve cell attachment and growth on PCSA surfaces. The behavior of neurons on treated petri dish surfaces was used as the control and behavior of neurons on treated PCSA discs was compared against it. Conclusions/Significance This study demonstrates that: 1) untreated PCSA surfaces do not support attachment and growth of nerve cells, 2) a thin application of laminin1 layer onto the PCSA discs adhered well to the PCSA surface while also supporting growth and differentiation of neurons as evidenced by the number of processes extended and b3-tubulin expression, 3) three dimensional porous structure of PCSA remains intact after fixing protocols necessary for preservation of biological samples and 4) laminin1 coating proved to be the most effective method for attaching neurons to the desired regions on PCSA discs. This work provides the basis for potential use of PCSA as a biomaterial scaffold for neural regeneration. PMID:22448239

Electrostatic Levitation for Studies of Additive Manufactured Materials

NASA Technical Reports Server (NTRS)

SanSoucie, Michael P.; Rogers, Jan R.; Tramel, Terri

2014-01-01

The electrostatic levitation (ESL) laboratory at NASA's Marshall Space Flight Center is a unique facility for investigators studying high temperature materials. The laboratory boasts two levitators in which samples can be levitated, heated, melted, undercooled, and resolidified. Electrostatic levitation minimizes gravitational effects and allows materials to be studied without contact with a container or instrumentation. The lab also has a high temperature emissivity measurement system, which provides normal spectral and normal total emissivity measurements at use temperature. The ESL lab has been instrumental in many pioneering materials investigations of thermophysical properties, e.g., creep measurements, solidification, triggered nucleation, and emissivity at high temperatures. Research in the ESL lab has already led to the development of advanced high temperature materials for aerospace applications, coatings for rocket nozzles, improved medical and industrial optics, metallic glasses, ablatives for reentry vehicles, and materials with memory. Modeling of additive manufacturing materials processing is necessary for the study of their resulting materials properties. In addition, the modeling of the selective laser melting processes and its materials property predictions are also underway. Unfortunately, there is very little data for the properties of these materials, especially of the materials in the liquid state. Some method to measure thermophysical properties of additive manufacturing materials is necessary. The ESL lab is ideal for these studies. The lab can provide surface tension and viscosity of molten materials, density measurements, emissivity measurements, and even creep strength measurements. The ESL lab can also determine melting temperature, surface temperatures, and phase transition temperatures of additive manufactured materials. This presentation will provide background on the ESL lab and its capabilities, provide an approach to using the ESL in supporting the development and modeling of the selective laser melting process for metals, and provide an overview of the results to date.

Support for a comprehensive background check requirement and expanded denial criteria for firearm transfers: findings from the firearms licensee survey.

PubMed

Wintemute, Garen J

2014-04-01

Federal and state policies on eligibility to purchase and possess firearms and background check requirements for firearm transfers are undergoing intensive review and, in some cases, modification. Our objective in this third report from the Firearms Licensee Survey (FLS) is to assess support among federally licensed firearms retailers (gun dealers and pawnbrokers) for a background check requirement on all firearm transfers and selected criteria for denying the purchase of handguns based on criminal convictions, alcohol abuse, and serious mental illness. The FLS was conducted by mail during June-August, 2011 on a random sample of 1,601 licensed dealers and pawnbrokers in 43 states who were believed to sell at least 50 firearms annually. The response rate was 36.9%, typical of establishment surveys using such methods. Most respondents (55.4%) endorsed a comprehensive background check requirement; 37.5% strongly favored it. Support was more common and stronger among pawnbrokers than dealers and among respondents who believed that "it is too easy for criminals to get guns." Support was positively associated with many establishment characteristics, including sales of inexpensive handguns, sales that were denied when the purchasers failed background checks, and sales of firearms that were later subjected to ownership tracing, and were negatively associated with sales at gun shows. Support for three existing and nine potential criteria for denial of handgun purchase involving criminal activity, alcohol abuse, and mental illness exceeded 90% in six cases and fell below 2/3 in one. Support again increased with sales of inexpensive handguns and denied sales and decreased with sales of tactical (assault-type) rifles. In this survey, which was conducted prior to mass shootings in Aurora, Colorado; Oak Creek, Wisconsin; Newtown, Connecticut; and elsewhere, licensed firearm sellers exhibited moderate support for a comprehensive background check requirement and very strong support for additional criteria for denial of handgun purchases. In both cases, support was associated with the intensity of respondents' exposure to illegal activities.

Social class differences in self, attribution, and attention: socially expansive individualism of middle-class Americans.

PubMed

Bowman, Nicholas A; Kitayama, Shinobu; Nisbett, Richard E

2009-07-01

Although U.S. culture strongly sanctions the ideal of independence, the specific ways in which independence is realized may be variable depending, among other factors, on social class. Characterized by relative scarcity of social and material resources, working-class (WC) Americans were expected to strongly value self-reliance. In contrast, with choices among abundant resources, middle-class (MC) Americans were expected to value personal control and social expansiveness. In support of this analysis, relative to their WC counterparts, MC Americans reported more support from friends and greater likelihood of giving and receiving advice but less self-reliance (Study 1). Furthermore, we found evidence that this social difference has cognitive consequences: College students with MC backgrounds were more likely than their WC counterparts were to endorse situational attributions for others' behavior (Studies 2a and 2b) as well as to show holistic visual attention (Study 3).

Places to Intervene to Make Complex Food Systems More Healthy, Green, Fair, and Affordable

PubMed Central

Malhi, Luvdeep; Karanfil, Özge; Merth, Tommy; Acheson, Molly; Palmer, Amanda; Finegood, Diane T.

2009-01-01

A Food Systems and Public Health conference was convened in April 2009 to consider research supporting food systems that are healthy, green, fair, and affordable. We used a complex systems framework to examine the contents of background material provided to conference participants. Application of our intervention-level framework (paradigm, goals, system structure, feedback and delays, structural elements) enabled comparison of the conference themes of healthy, green, fair, and affordable. At the level of system structure suggested actions to achieve these goals are fairly compatible, including broad public discussion and implementation of policies and programs that support sustainable food production and distribution. At the level of paradigm and goals, the challenge of making healthy and green food affordable becomes apparent as some actions may be in conflict. Systems thinking can provide insight into the challenges and opportunities to act to make the food supply more healthy, green, fair, and affordable. PMID:23173029

Social Networking Sites: An Adjunctive Treatment Modality for Psychological Problems

PubMed Central

Menon, Indu S.; Sharma, Manoj Kumar; Chandra, Prabha S.; Thennarasu, K.

2014-01-01

Background: Social networking is seen as a way to enhance social support and feeling of well-being. The present work explores the potentials of social networking sites as an adjunctive treatment modality for initiating treatment contact as well as for managing psychological problems. Materials and Methods: Interview schedule, Facebook intensity questionnaire were administered on 28 subjects with a combination of 18 males and 10 females. They were taken from the in-patient and out-patient psychiatry setting of the hospital. Results: Facebook was the most popular sites and used to seek emotional support on the basis of the frequent updates of emotional content that users put in their profile; reconciliations, escape from the problems or to manage the loneliness; getting information about illness and its treatment and interaction with experts and also manifested as problematic use. Conclusions: It has implications for developing social networking based adjunctive treatment modality for psychological problems. PMID:25035548

Optical Design Considerations for Efficient Light Collection from Liquid Scintillation Counters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernacki, Bruce E.; Douglas, Matthew; Erchinger, Jennifer L.

2015-01-01

Liquid scintillation counters measure charged particle-emitting radioactive isotopes and are used for environmental studies, nuclear chemistry, and life science. Alpha and beta emissions arising from the material under study interact with the scintillation cocktail to produce light. The prototypical liquid scintillation counter employs low-level photon-counting detectors to measure the arrival of the scintillation light produced as a result of the dissolved material under study interacting with the scintillation cocktail. For reliable operation the counting instrument must convey the scintillation light to the detectors efficiently and predictably. Current best practices employ the use of two or more detectors for coincidence processingmore » to discriminate true scintillation events from background events due to instrumental effects such as photomultiplier tube dark rates, tube flashing, or other light emission not generated in the scintillation cocktail vial. In low background liquid scintillation counters additional attention is paid to shielding the scintillation cocktail from naturally occurring radioactive material (NORM) present in the laboratory and within the instruments construction materials. Low background design is generally at odds with optimal light collection. This study presents the evolution of a light collection design for liquid scintillation counting in a low background shield. The basic approach to achieve both good light collection and a low background measurement is described. The baseline signals arising from the scintillation vial are modeled and methods to efficiently collect scintillation light are presented as part of the development of a customized low-background, high sensitivity liquid scintillation counting system.« less

Nest covering in plovers: How modifying the visual environment influences egg camouflage.

PubMed

Troscianko, Jolyon; Wilson-Aggarwal, Jared; Spottiswoode, Claire N; Stevens, Martin

2016-10-01

Camouflage is one of the most widespread antipredator defences, and its mechanistic basis has attracted considerable interest in recent years. The effectiveness of camouflage depends on the interaction between an animal's appearance and its background. Concealment can therefore be improved by changes to an animal's own appearance, by behaviorally selecting an optimal background, or by modifying the background to better match the animal's own appearance. Research to date has largely focussed on the first of these mechanisms, whereas there has been little work on the second and almost none on the third. Even though a number of animal species may potentially modify their environment to improve individual-specific camouflage, this has rarely if ever been quantitatively investigated, or its adaptive value tested. Kittlitz's plovers (Charadrius pecuarius) use material (stones and vegetation) to cover their nests when predators approach, providing concealment that is independent of the inflexible appearance of the adult or eggs, and that can be adjusted to suit the local surrounding background. We used digital imaging and predator vision modeling to investigate the camouflage properties of covered nests, and whether their camouflage affected their survival. The plovers' nest-covering materials were consistent with a trade-off between selecting materials that matched the color of the eggs, while resulting in poorer nest pattern and contrast matching to the nest surroundings. Alternatively, the systematic use of materials with high-contrast and small-pattern grain sizes could reflect a deliberate disruptive coloration strategy, whereby high-contrast material breaks up the telltale outline of the clutch. No camouflage variables predicted nest survival. Our study highlights the potential for camouflage to be enhanced by background modification. This provides a flexible system for modifying an animal's conspicuousness, to which the main limitation may be the available materials rather than the animal's appearance.

A Portable Infrasonic Detection System

NASA Technical Reports Server (NTRS)

Shams, Qamar A.; Burkett, Cecil G.; Zuckerwar, Allan J.; Lawrenson, Christopher C.; Masterman, Michael

2008-01-01

During last couple of years, NASA Langley has designed and developed a portable infrasonic detection system which can be used to make useful infrasound measurements at a location where it was not possible previously. The system comprises an electret condenser microphone, having a 3-inch membrane diameter, and a small, compact windscreen. Electret-based technology offers the lowest possible background noise, because Johnson noise generated in the supporting electronics (preamplifier) is minimized. The microphone features a high membrane compliance with a large backchamber volume, a prepolarized backplane and a high impedance preamplifier located inside the backchamber. The windscreen, based on the high transmission coefficient of infrasound through matter, is made of a material having a low acoustic impedance and sufficiently thick wall to insure structural stability. Close-cell polyurethane foam has been found to serve the purpose well. In the proposed test, test parameters will be sensitivity, background noise, signal fidelity (harmonic distortion), and temporal stability. The design and results of the compact system, based upon laboratory and field experiments, will be presented.

[Research model on commodity specification standard of radix Chinese materia medica].

PubMed

Kang, Chuan-Zhi; Zhou, Tao; Jiang, Wei-Ke; Huang, Lu-Qi; Guo, Lan-Ping

2016-03-01

As an important part of the market commodity circulation, the standard grade of Chinese traditional medicine commodity is very important to restrict the market order and guarantee the quality of the medicinal material. The State Council issuing the "protection and development of Chinese herbal medicine (2015-2020)" also make clear that the important task of improving the circulation of Chinese herbal medicine industry norms and the commodity specification standard of common traditional Chinese medicinal materials. However, as a large class of Chinese herbal medicines, the standard grade of the radix is more confused in the market circulation, and lack of a more reasonable study model in the development of the standard. Thus, this paper summarizes the research background, present situation and problems, and several key points of the commodity specification and grade standard in radix herbs. Then, the research model is introduced as an example of Pseudostellariae Radix, so as to provide technical support and reference for formulating commodity specifications and grades standard in other radix traditional Chinese medicinal materials. Copyright© by the Chinese Pharmaceutical Association.

A Retrieval System for Radioactive Target Materials at the NIF

NASA Astrophysics Data System (ADS)

Krieger, M.; Shibata, K.; Fallica, J.; Henchen, R.; Pogozelski, E.; Padalino, S.; Sangster, T. C.; Suny Collaboration; Laboratory Collaboration

2011-10-01

Currently, solid radioactive material collection from the NIF target chamber is performed via the DIM. The retrieval process takes several hours to complete. To decrease this time for short lived radioisotopes, the Target Materials Retrieval System (TMRS) is being designed to move a radioactive sample from the target chamber to the counting station in less than 50 seconds, using a closed-loop helium filled RaPToRS system. The TMRS consists of three components: the retrieval apparatus, RaPToRS and the counting station. Starting at 0.5 meters from TCC, the sample will move from the vacuum chamber, travel through 60 meters of 10 centimeter diameter RaPToRS tubes, reaching speeds of 10 m/s. The sample will then arrive at the counting station, where it be robotically placed in front of a gamma ray detector. The use of helium will decrease background gamma radiation produced by activated N2 normally found in a pressurized air system. This work was supported in part by the US Department of Energy through the LLE.

Expected background in the LZ experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kudryavtsev, Vitaly A.

2015-08-17

The LZ experiment, featuring a 7-tonne active liquid xenon target, is aimed at achieving unprecedented sensitivity to WIMPs with the background expected to be dominated by astrophysical neutrinos. To reach this goal, extensive simulations are carried out to accurately calculate the electron recoil and nuclear recoil rates in the detector. Both internal (from target material) and external (from detector components and surrounding environment) backgrounds are considered. A very efficient suppression of background rate is achieved with an outer liquid scintillator veto, liquid xenon skin and fiducialisation. Based on the current measurements of radioactivity of different materials, it is shown thatmore » LZ can achieve the reduction of a total background for a WIMP search down to about 2 events in 1000 live days for 5.6 tonne fiducial mass.« less

78 FR 16684 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... provide timely notice. Therefore, you should always check the Agency's Web site at http://www.fda.gov...]derm Voluma XC is indicated for deep (dermal/subcutaneous and/or submuscular/ supraperiosteal... the background material on its Web site prior to the meeting, the background material will be made...

Early space experiments in materials processing

NASA Technical Reports Server (NTRS)

Naumann, R. J.

1979-01-01

A comprehensive survey of the flight experiments conducted in conjunction with the United States Materials Processing in Space Program is presented. Also included are a brief description of the conditions prevailing in an orbiting spacecraft and the research implications provided by this unique environment. What was done and what was learned are summarized in order to serve as a background for future experiments. It is assumed that the reader has some knowledge of the physical sciences but no background in spaceflight experimentation or in the materials science per se.

Thermomechanical Fatigue Behavior of a Silicone Carbide Fiber-Reinforced Calcium Aluminosilicate Glass-Ceramic Matrix Composite

DTIC Science & Technology

1991-01-01

Fibers," Journal of Materials Science Letters, Chapman & Hall, Ltd., London, England, 2, [9], 1983, pp. 80-82. Wang, S-W, and Parvizi- Majidi , A...cross-plied [0/9012s material and found behavior similar to that seen by Rousseau, and Wang & Parvizi- Majidi . 17 References - CHAPTER I1: BACKGROUND...eds., American Society for Testing and Materials, Philadelphia, PA, 1990, pp. 136-151. 63 Wang, S-W, and Parvizi- Majidi , A., "Mechanical Behavior of

The Impact of Latino Values and Cultural Beliefs on Brain Donation: Results of a Pilot Study to Develop Culturally Appropriate Materials and Methods to Increase Rates of Brain Donation in this Under-Studied Patient Group.

PubMed

Bilbrey, Ann Choryan; Humber, Marika B; Plowey, Edward D; Garcia, Iliana; Chennapragada, Lakshmi; Desai, Kanchi; Rosen, Allyson; Askari, Nusha; Gallagher-Thompson, Dolores

2018-01-01

Increasing the number of Latino persons with dementia who consent to brain donation (BD) upon death is an important public health goal that has not yet been realized. This study identified the need for culturally sensitive materials to answer questions and support the decision-making process for the family. Information about existing rates of BD was obtained from the Alzheimer's Disease Centers. Several methods of data collection (query NACC database, contacting Centers, focus groups, online survey, assessing current protocol and materials) were used to give the needed background to create culturally appropriate BD materials. A decision was made that a brochure for undecided enrollees would be beneficial to discuss BD with family members. For those needing further details, a step-by-step handout would provide additional information. Through team collaboration and engagement of others in the community who work with Latinos with dementia, we believe this process allowed us to successfully create culturally appropriate informational materials that address a sensitive topic for Hispanic/Latino families. Brain tissue is needed to further knowledge about underlying biological mechanism of neurodegenerative diseases, however it is a sensitive topic. Materials assist with family discussion and facilitate the family's follow-through with BD.

CUORE and Background Reduction Case Studies for CUPID

NASA Astrophysics Data System (ADS)

Sakai, Michinari; Gozlukluoglu, Nihal; Huang, Huan; Cuore Collaboration

2017-09-01

CUORE (Cryogenic Underground Observatory for Rare Events) is a bolometric experiment at cryogenic temperatures currently in operation to search for neutrinoless double beta decay. Successful detection of this extremely rare process requires stringent control of radioactive backgrounds of the experiment as well as the detector itself. Great care was taken in CUORE to select the materials and various parts that comprise the current detector. However next-generation neutrinoless double beta decay experiments face a challenge to further reduce backgrounds in order to probe more deeply into the effective Majorana neutrino mass phase space. In this presentation we will review the sensitivity and background budget for the currently running experiment CUORE, as well as the target sensitivity and background goals for the next generation experiment CUPID that will cover the inverted neutrino mass hierarchy. We will explore simulation based R&D case studies for background reduction and lay out achievable background reduction levels using possible materials and feasible geometries in the context of CUPID. National Science Foundation.

Concept of Culture. Grade 4. Teacher's Background Material: Enculturation, Cultural Variation, Culture Dynamics [And] Pupil Text [And] Pupil Study Guide [And] A Sequential Curriculum in Anthropology. Test: Form 4, Composite Form for Pre- And Post-Test. (Revised, January 1968). Publications No. 13-17 and 42.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Anthropology Curriculum Project.

This social studies unit includes teacher background material, a student text, study guide, and composite pretest/posttest explaining and discussing cultural concepts. It is part of the Anthropology Curriculum Project and is designed to be used in grade 4. The unit objective is to provide students with a background for understanding man and his…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spitznagel, D

Purpose: The use of protons for radiation therapy is growing rapidly. One consequence of protons interacting with different media is activation. These nuclear reactions induced by the protons, scattered neutrons, and gamma rays, activate different materials encountered, particularly by the therapists. The purpose of this study was to examine the derived nuclides from the activation, and also the decay rate. Methods: The study was conducted in our proton therapy facility. Protons are derived from a synchrocyclotron and pass through field shipping systems, apertures, and range compensators to define the beam within the patient.Included materials of concerns measured; the patient supportmore » couch, sheet rock in the wall, solid plastics used for quality assurance and dosimetry, and the passive scattering system itself, which includes brass apertures, and Lucite or blue wax compensators. All devices were studied post irradiation using gamma spectroscopy to determine the nuclides, and a sodium iodine scintillation detector to measure decay, particularly when the dose rate fell to background levels. Results: We have also determined from the measurements we will maintain brass apertures for three months before sending them for scrap. Some of the radionuclides arrived from these measurements included Na-22 for the blue wax compensator, C1-34m for the sheetrock, and Sc-44 and Co-60 for the brass apertures. We found compensators made out of Lucite or wax decayed to background in 2 hours. The patient support couch decayed to background in approximately 40 minutes, and sheet rock decayed in 80 minutes. In terms of the aperture layers, the most proximal aperture slab had much higher activity than the distal slab. Also the proximal sides of the slabs were much more activate than the distal. Conclusion: We have given proper instruction to therapists performing quality assurance in terms of the handled plastics, and to handle apertures rapidly as possible.« less

Background Materials Concerning Child and Family Services Act, 1975, H.R. 2966. Committee Print, 94th Congress, 2d Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

This document contains the text of Child and Family Services Act of 1975, H.R. 2966, and background materials concerning that act. Included are reprints of many newspaper and magazine articles as well as statements of members of Congress in response to the campaign against the bill. (MS)

Druze Minority Students Learning Hebrew in Israel: The Relationship of Attitudes, Cultural Background, and Interest of Material to Reading Comprehension in a Second Language.

ERIC Educational Resources Information Center

Abu-Rabia, Salim

1996-01-01

Examines Israeli-Druze students' reading comprehension in Hebrew as a second language as related to their attitudes, cultural background, and interest in the material. Participants were administered questionnaires, Arab and Jewish cultural stories, and multiple-choice questions about each story. Results are discussed. (51 references) (Author/CK)

Periodic Comet Shoemaker-Levy 9 Collides with Jupiter. Background Material for Science Teachers.

ERIC Educational Resources Information Center

Jet Propulsion Lab., Pasadena, CA.

In July of 1994, fragments of Comet Shoemaker-Levy collided with Jupiter. This document has been provided to better inform students of the work that will be done by scientists and others involved in the study of this event. This document offers some background material on Jupiter, comets, what has and possibly will happen, and how scientists…

Expected Backgrounds of the BetaCage, an Ultra-sensitive Screener for Surface Contamination

NASA Astrophysics Data System (ADS)

Wang, Boqian; Bunker, Raymond; Schnee, Richard; Bowles, Michael; Kos, Marek; Ahmed, Zeeshan; Golwala, Sunil; Nelson, Robert; Grant, Darren

2013-04-01

Material screening for low-energy betas and alphas is necessary for rare-event-search experiments, such as dark matter and neutrinoless double-beta decay searches where surface radiocontamination has become a significant background. The BetaCage, a gaseous neon time-projection chamber, has been proposed as a screener for emitters of low-energy betas and alphas to which existing screening facilities are insufficiently sensitive. The expected sensitivity is 0.1 betas / (keV m^2 day) and 0.1 alphas / (m^2 day). Expected backgrounds are dominated by Compton scattering of external photons in the sample to be screened; radioassays and simulations indicate backgrounds from detector materials and radon daughters should be subdominant. We will report on details of the background simulations and the detector design that allows discrimination to reach these sensitivity levels.

Modeling surface backgrounds from radon progeny plate-out

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perumpilly, G.; Guiseppe, V. E.; Snyder, N.

2013-08-08

The next generation low-background detectors operating deep underground aim for unprecedented low levels of radioactive backgrounds. The surface deposition and subsequent implantation of radon progeny in detector materials will be a source of energetic background events. We investigate Monte Carlo and model-based simulations to understand the surface implantation profile of radon progeny. Depending on the material and region of interest of a rare event search, these partial energy depositions can be problematic. Motivated by the use of Ge crystals for the detection of neutrinoless double-beta decay, we wish to understand the detector response of surface backgrounds from radon progeny. Wemore » look at the simulation of surface decays using a validated implantation distribution based on nuclear recoils and a realistic surface texture. Results of the simulations and measured α spectra are presented.« less

Sex and mathematical background as predictors of anxiety and self-efficacy in mathematics.

PubMed

Lussier, G

1996-12-01

Anxiety and self-efficacy in mathematics as a function of sex and mathematical background were investigated. This study employed an ex post facto 2 x 2 factorial design in which sex and mathematical background were classification variables. It was predicted that men would report lower anxiety scores and higher self-efficacy scores than women and that students with a high mathematical background would report lower anxiety scores and higher self-efficacy scores than those with a low background in mathematics. An interaction between sex and mathematical background was also predicted. 51 subjects were given the revised Mathematics Anxiety Scale and the Mathematics Self-efficacy Scale. Results supported the hypotheses with respect to background in mathematics for anxiety in mathematics, and all of the hypotheses were supported for self-efficacy in mathematics.

The U.S. national nuclear forensics library, nuclear materials information program, and data dictionary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamont, Stephen Philip; Brisson, Marcia; Curry, Michael

2011-02-17

Nuclear forensics assessments to determine material process history requires careful comparison of sample data to both measured and modeled nuclear material characteristics. Developing centralized databases, or nuclear forensics libraries, to house this information is an important step to ensure all relevant data will be available for comparison during a nuclear forensics analysis and help expedite the assessment of material history. The approach most widely accepted by the international community at this time is the implementation of National Nuclear Forensics libraries, which would be developed and maintained by individual nations. This is an attractive alternative toan international database since it providesmore » an understanding that each country has data on materials produced and stored within their borders, but eliminates the need to reveal any proprietary or sensitive information to other nations. To support the concept of National Nuclear Forensics libraries, the United States Department of Energy has developed a model library, based on a data dictionary, or set of parameters designed to capture all nuclear forensic relevant information about a nuclear material. Specifically, information includes material identification, collection background and current location, analytical laboratories where measurements were made, material packaging and container descriptions, physical characteristics including mass and dimensions, chemical and isotopic characteristics, particle morphology or metallurgical properties, process history including facilities, and measurement quality assurance information. While not necessarily required, it may also be valuable to store modeled data sets including reactor burn-up or enrichment cascade data for comparison. It is fully expected that only a subset of this information is available or relevant to many materials, and much of the data populating a National Nuclear Forensics library would be process analytical or material accountability measurement data as opposed to a complete forensic analysis of each material in the library.« less

Promoting adherence to nebulized therapy in cystic fibrosis: poster development and a qualitative exploration of adherence

PubMed Central

Jones, Stephen; Babiker, Nathan; Gardner, Emma; Royle, Jane; Curley, Rachael; Hoo, Zhe Hui; Wildman, Martin J

2015-01-01

Background Cystic fibrosis (CF) health care professionals recognize the need to motivate people with CF to adhere to nebulizer treatments, yet little is known about how best to achieve this. We aimed to produce motivational posters to support nebulizer adherence by using social marketing involving people with CF in the development of those posters. Methods The Sheffield CF multidisciplinary team produced preliminary ideas that were elaborated upon with semi-structured interviews among people with CF to explore barriers and facilitators to the use of nebulized therapy. Initial themes and poster designs were refined using an online focus group to finalize the poster designs. Results People with CF preferred aspirational posters describing what could be achieved through adherence in contrast to posters that highlighted the adverse consequences of nonadherence. A total of 14 posters were produced through this process. Conclusion People with CF can be engaged to develop promotional material to support adherence, providing a unique perspective differing from that of the CF multidisciplinary team. Further research is needed to evaluate the effectiveness of these posters to support nebulizer adherence. PMID:26346635

Implant Supported Distal Extension over Denture Retained by Two Types of Attachments. A Comparative Radiographic Study by Cone Beam Computed Tomography

PubMed Central

Mahrous, Ahmed I; Aldawash, Hussien A; Soliman, Tarek A; Banasr, Fahad H; Abdelwahed, Ahmed

2015-01-01

Background: This study was conducted to compare and evaluate the effect of two different attachments (locator attachment and ball and socket [B&S] attachment) on implants and natural abutments supporting structures, in cases of limited inter-arch spaces in mandibular Kennedy Class I implant supported removable partial over dentures by measuring the bone height changes through the cone beam radiographic technology. Materials and Methods: Two implants were positioned in the first or second molar area following the two-stage surgical protocol. Two equal groups were divided ten for each: Group I: Sides were the placed implants restored by the locator attachment. Group II: The other sides, implants were restored by B&S attachment. Evaluation of the implants and main abutments supporting structures of each group was done at the time of removable partial over denture insertion, 6, 12 and 18 months by measuring the bone height changes using cone beam computed tomography. Results: Implants with locator attachment showed marginal bone height better effects on implants and main abutments supporting structures. Conclusion: Implants restored by locator attachment shows better effects on bone of both main natural abutments and implant than those restored with ball and socket. PMID:26028894

Graphene-supporting films and low-voltage STEM in SEM toward imaging nanobio materials without staining: Observation of insulin amyloid fibrils.

PubMed

Ogawa, Takashi; Gang, Geun Won; Thieu, Minh Thu; Kwon, Hyuksang; Ahn, Sang Jung; Ha, Tai Hwan; Cho, Boklae

2017-05-01

Utilization of graphene-supporting films and low-voltage scanning transmission electron microscopy (LV-STEM) in scanning electron microscopy (SEM) is shown to be an effective means of observing unstained nanobio materials. Insulin amyloid fibrils, which are implicated as a cause of type II diabetes, are formed in vitro and observed without staining at room temperature. An in-lens cold field-emission SEM, equipped with an additional homemade STEM detector, provides dark field (DF)-STEM images in the low energy range of 5-30keV, together with secondary electron (SE) images. Analysis based on Lenz's theory is used to interpret the experimental results. Graphene films, where the fibrils are deposited, reduce the background level of the STEM images compared with instances when conventional amorphous carbon films are used. Using 30keV, which is lower than that for conventional TEM (100-300keV), together with low detection angles (15-55mrad) enhances the signals from the fibrils. These factors improve image quality, which enables observation of thin fibrils with widths of 7-8nm. STEM imaging clearly reveals a twisted-ribbon structure of a fibril, and SE imaging shows an emphasized striped pattern of the fibril. The LV-STEM in SEM enables acquisition of two types of images of an identical fibril in a single instrument, which is useful for understanding the structure. This study expands the application of SEM to other systems of interest, which is beneficial to a large number of users. The method in this study can be applied to the observation of various nanobio materials and analysis of their native structures, thus contributing to research in materials and life sciences. Copyright © 2017 Elsevier Ltd. All rights reserved.

Relaxing music counters heightened consolidation of emotional memory.

PubMed

Rickard, Nikki S; Wong, Wendy Wing; Velik, Lauren

2012-02-01

Emotional events tend to be retained more strongly than other everyday occurrences, a phenomenon partially regulated by the neuromodulatory effects of arousal. Two experiments demonstrated the use of relaxing music as a means of reducing arousal levels, thereby challenging heightened long-term recall of an emotional story. In Experiment 1, participants (N=84) viewed a slideshow, during which they listened to either an emotional or neutral narration, and were exposed to relaxing or no music. Retention was tested 1 week later via a forced choice recognition test. Retention for both the emotional content (Phase 2 of the story) and material presented immediately after the emotional content (Phase 3) was enhanced, when compared with retention for the neutral story. Relaxing music prevented the enhancement for material presented after the emotional content (Phase 3). Experiment 2 (N=159) provided further support to the neuromodulatory effect of music by post-event presentation of both relaxing music and non-relaxing auditory stimuli (arousing music/background sound). Free recall of the story was assessed immediately afterwards and 1 week later. Relaxing music significantly reduced recall of the emotional story (Phase 2). The findings provide further insight into the capacity of relaxing music to attenuate the strength of emotional memory, offering support for the therapeutic use of music for such purposes. Copyright © 2011 Elsevier Inc. All rights reserved.

NASA Task Load Index (TLX). Volume 1.0; Paper and Pencil Package

NASA Technical Reports Server (NTRS)

Hart, Sandra G.

1986-01-01

This booklet contains the materials necessary to collect subjective workload assessments with the NASA Task Load Index. This procedure for collecting workload ratings was developed by the Human Performance Group at NASA Ames Research Center during a three year research effort that involved more than 40 laboratory. simulation. and inflight experiments. Although the technique is still undergoing evaluation. this booklet is being distributed to allow other researchers to use it in their own experiments. Comments or suggestions about the procedure would be greatly appreciated. This package is intended to fill a "nuts and bolts" function of describing the procedure. A bibliography provides background information about previous empirical findings and the logic that supports the procedure.

Windows to the Universe: Earth Science Enterprise Education Program

NASA Technical Reports Server (NTRS)

2004-01-01

Over the past year, Windows to the Universe has continued a multifaceted program of support to the Earth Science Enterprise Education program. Areas of activity include continued maintenance of the W2U website and user traffic analysis, development of new and revised content and activities on the website, implementation of new tools to facilitate website development and maintenance, response to users questions and comments, professional development for educators through workshops at the National Science Teachers Association meetings and at NCAR, and dissemination of information about the project through materials distribution at NSTAs, AGUs, AMS and other venues. This report provides some background on the project and summarizes progress for the third and final year of the project.

Journalism Majors More Likely to Support Liberal Viewpoints.

ERIC Educational Resources Information Center

St. Dizier, Byron

1989-01-01

Compares the backgrounds and beliefs of broadcast and print journalism students with students in other disciplines. Finds that journalism students support more liberal political and social positions than students with other majors, despite the fact that most students surveyed came from similar backgrounds. (MM)

Comprehending Comprehension: Selected Possibilities for Clinical Practice Within a Multidimensional Model.

PubMed

Wallach, Geraldine P; Ocampo, Alaine

2017-04-20

In this discussion as part of a response to Catts and Kamhi's "Prologue: Reading Comprehension Is Not a Single Activity" (2017), the authors provide selected examples from 4th-, 5th-, and 6th-grade texts to demonstrate, in agreement with Catts and Kamhi, that reading comprehension is a multifaceted and complex ability. The authors were asked to provide readers with evidence-based practices that lend support to applications of a multidimensional model of comprehension. We present examples from the reading comprehension literature that support the notion that reading is a complex set of abilities that include a reader's ability, especially background knowledge; the type of text the reader is being asked to comprehend; and the task or technique used in assessment or intervention paradigms. An intervention session from 6th grade serves to demonstrate how background knowledge, a text's demands, and tasks may come together in the real world as clinicians and educators aim to help students comprehend complex material. The authors agree with the conceptual framework proposed by Catts and Kamhi that clinicians and educators should consider the multidimensional nature of reading comprehension (an interaction of reader, text, and task) when creating assessment and intervention programs. The authors might depart slightly by considering, more closely, those reading comprehension strategies that might facilitate comprehension across texts and tasks with an understanding of students' individual needs at different points in time.

Design of a decision support system, trained on GPU, for assisting melanoma diagnosis in dermatoscopy images

NASA Astrophysics Data System (ADS)

Glotsos, Dimitris; Kostopoulos, Spiros; Lalissidou, Stella; Sidiropoulos, Konstantinos; Asvestas, Pantelis; Konstandinou, Christos; Xenogiannopoulos, George; Konstantina Nikolatou, Eirini; Perakis, Konstantinos; Bouras, Thanassis; Cavouras, Dionisis

2015-09-01

The purpose of this study was to design a decision support system for assisting the diagnosis of melanoma in dermatoscopy images. Clinical material comprised images of 44 dysplastic (clark's nevi) and 44 malignant melanoma lesions, obtained from the dermatology database Dermnet. Initially, images were processed for hair removal and background correction using the Dull Razor algorithm. Processed images were segmented to isolate moles from surrounding background, using a combination of level sets and an automated thresholding approach. Morphological (area, size, shape) and textural features (first and second order) were calculated from each one of the segmented moles. Extracted features were fed to a pattern recognition system assembled with the Probabilistic Neural Network Classifier, which was trained to distinguish between benign and malignant cases, using the exhaustive search and the leave one out method. The system was designed on the GPU card (GeForce 580GTX) using CUDA programming framework and C++ programming language. Results showed that the designed system discriminated benign from malignant moles with 88.6% accuracy employing morphological and textural features. The proposed system could be used for analysing moles depicted on smart phone images after appropriate training with smartphone images cases. This could assist towards early detection of melanoma cases, if suspicious moles were to be captured on smartphone by patients and be transferred to the physician together with an assessment of the mole's nature.

Supportive relationship: Experiences of Iranian students and teachers concerning student-teacher relationship in clinical nursing education

PubMed Central

Heydari, Abbas; Yaghoubinia, Fariba; Roudsari, Robab Latifnejad

2013-01-01

Background: Student-teacher relationship is a salient issue in nursing education and has long-lasting implication in professional development of nursing students. Nowadays, this relationship in clinical settings is different from the past due to changing in nursing education paradigm. The purpose of this qualitative study was to explore the experiences of students and teachers about student-teacher relationship in the context of clinical nursing education in Iran. Materials and Methods: In this qualitative study that has been carried out adopting conventional qualitative content analysis approach, six bachelor nursing students and six clinical teachers in school of Nursing and Midwifery, were selected through purposive sampling. Semi-structured interview and participant observation were used for data collection. Interviews transcribed verbatim and analyzed using conventional content analysis through the process of data reduction and condensation, coding and also generating the categories and themes. Results: Results of the study showed the existence of a type of relationship in clinical education in which supportive actions of clinical teachers were prominent. These supportive actions appeared as three major categories including educational support, emotional support and social support which emerged from data. Conclusion: The results of this study explicit the ways that support could be provided for students in their relationship with clinical teachers. It also determines the teachers’ need to know more about the influence of their supportive relationship on students’ learning and the best possible outcomes of their education in clinical settings. PMID:24554945

Spectral characterization of natural backgrounds

NASA Astrophysics Data System (ADS)

Winkelmann, Max

2017-10-01

As the distribution and use of hyperspectral sensors is constantly increasing, the exploitation of spectral features is a threat for camouflaged objects. To improve camouflage materials at first the spectral behavior of backgrounds has to be known to adjust and optimize the spectral reflectance of camouflage materials. In an international effort, the NATO CSO working group SCI-295 "Development of Methods for Measurements and Evaluation of Natural Background EO Signatures" is developing a method how this characterization of backgrounds has to be done. It is obvious that the spectral characterization of a background will be quite an effort. To compare and exchange data internationally the measurements will have to be done in a similar way. To test and further improve this method an international field trial has been performed in Storkow, Germany. In the following we present first impressions and lessons learned from this field campaign and describe the data that has been measured.

A unidirectional acoustic cloak for multilayered background media with homogeneous metamaterials

NASA Astrophysics Data System (ADS)

Zhu, Jian; Chen, Tianning; Liang, Qingxuan; Wang, Xiaopeng; Xiong, Jie; Jiang, Ping

2015-08-01

The acoustic cloak, which can make an object hard to detect acoustically in a homogeneous background, has attracted great attention from researchers in recent years. The inhomogeneous background media were considered in this paper. The relative constitutive parameters were derived for acoustic cloaks working in multilayered media. And a unidirectional acoustic cloak for layered background media was proposed, designed and implemented successfully in a wide frequency range. In water and NaCl aqueous solution, the acoustic cloak was designed and realized with homogeneous metamaterials which were composed of steel and porous materials. The effective parameters of the unit cells of the cloak were determined by using the effective medium theory. Numerical results demonstrated excellent cloaking performance and showed that such a device could be physically realized with natural materials which will greatly promote the real applications of an invisibility cloak in inhomogeneous backgrounds.

Physico-chemical characterisation of material fractions in household waste: Overview of data in literature.

PubMed

Götze, Ramona; Boldrin, Alessio; Scheutz, Charlotte; Astrup, Thomas Fruergaard

2016-03-01

State-of-the-art environmental assessment of waste management systems rely on data for the physico-chemical composition of individual material fractions comprising the waste in question. To derive the necessary inventory data for different scopes and systems, literature data from different sources and backgrounds are consulted and combined. This study provides an overview of physico-chemical waste characterisation data for individual waste material fractions available in literature and thereby aims to support the selection of data fitting to a specific scope and the selection of uncertainty ranges related to the data selection from literature. Overall, 97 publications were reviewed with respect to employed characterisation method, regional origin of the waste, number of investigated parameters and material fractions and other qualitative aspects. Descriptive statistical analysis of the reported physico-chemical waste composition data was performed to derive value ranges and data distributions for element concentrations (e.g. Cd content) and physical parameters (e.g. heating value). Based on 11,886 individual data entries, median values and percentiles for 47 parameters in 11 individual waste fractions are presented. Exceptional values and publications are identified and discussed. Detailed datasets are attached to this study, allowing further analysis and new applications of the data. Copyright © 2016 Elsevier Ltd. All rights reserved.

Oriented antibody immobilization to polystyrene macrocarriers for immunoassay modified with hydrazide derivatives of poly(meth)acrylic acid

PubMed Central

Shmanai, Vadim V; Nikolayeva, Tamara A; Vinokurova, Ludmila G; Litoshka, Anatoli A

2001-01-01

Background Hydrophobic polystyrene is the most common material for solid phase immunoassay. Proteins are immobilized on polystyrene by passive adsorption, which often causes considerable denaturation. Biological macromolecules were found to better retain their functional activity when immobilized on hydrophilic materials. Polyacrylamide is a common material for solid-phase carriers of biological macromolecules, including immunoreagents used in affinity chromatography. New macroformats for immunoassay modified with activated polyacrylamide derivatives seem to be promising. Results New polymeric matrices for immunoassay in the form of 0.63-cm balls which contain hydrazide functional groups on hydrophilic polymer spacer arms at their surface shell are synthesized by modification of aldehyde-containing polystyrene balls with hydrazide derivatives of poly(meth)acrylic acid. The beads contain up to 0.31 μmol/cm2 active hydrazide groups accessible for covalent reaction with periodate-oxidized antibodies. The matrices obtained allow carrying out the oriented antibody immobilization, which increases the functional activity of immunosorbents. Conclusions An efficient site-directed antibody immobilization on a macrosupport is realized. The polymer hydrophilic spacer arms are the most convenient and effective tools for oriented antibody coupling with molded materials. The suggested scheme can be used for the modification of any other solid supports containing electrophilic groups reacting with hydrazides. PMID:11545680

Further steps towards healthy women.

PubMed

1997-10-01

In many areas of the world, lack of money, time, and education compels women to perform their household duties and neglect their health care regardless of how sick they are. In response to this situation, the World Health Organization created a "Healthy Women Counselling Guide" (HWCG) package consisting of 1) a document that describes background research conducted in Nigeria, Kenya, and Sierra Leone; 2) a document that chronicles the development of radio and illustration materials; 3) sample audiocassette tapes from the three country teams; 4) two illustrated booklets and a calendar supporting the radio tapes; and 5) a user's guide. The pretested materials in the HWCG were designed with community input for rural women. The sample tape from Kenya focuses on malaria and that from Nigeria on vesicovaginal fistula. The Nigerian team also produced a booklet on adolescent childbirth. The Sierra Leone team prepared a calendar illustrated with information about a variety of ways to obtain good health. A further HWCG series is being developed in India on alcohol abuse. The HWCG package was developed for policy-makers, nongovernmental organizations, and other individuals and agencies concerned with improving women's health. Additional HWCC activities will involve wider dissemination of the material that has been developed, exchanges among teams to determine cross-cultural applicability and adaptability of the material, and studies of the impact of the HWCG process.

Predictors of health literacy and numeracy concordance among adolescent with special health care needs and their parents

PubMed Central

Chisolm, Deena J; Sarkar, Madhurima; Kelleher, Kelly J.; Sanders, Lee M.

2015-01-01

Background Parent and teen health literacies (HL) are employed as teens with chronic illnesses transition to health self-management and the adult health system. This study explores the relationships between parent and teen HL. Methods Teens ages 12-18 with chronic conditions and their parents, sampled from a pediatric Medicaid ACO, completed an interview assessing HL and self-reported competence with written and numeric health information. Rates of teen and parent HL, degree of concordance, and relationship between concordance and teen-reported competence with health materials were measured. Results Half (52%) of teens had adequate HL. 62% of teens reported competence with written health materials and 69% with numeric information. Correlation between parent and teen HL was modest but significant (phi=0.13; p=0.03). 47% of parent-teen dyads were concordant for adequate HL while 10% were concordant inadequate. Adequate teen HL was associated with parental adequate HL and parental education. Discordance was associated with self-reported competence with written material and numeric material. Conclusion Over half of parent-teen dyads had at least one member with less than adequate health literacy and parent-teen HL concordance were associated with teen perception of health literacy. These findings support the consideration of both independent and dyad HL levels in adolescent care. PMID:26513030

Prevalence of human cell material: DNA and RNA profiling of public and private objects and after activity scenarios.

PubMed

van den Berge, M; Ozcanhan, G; Zijlstra, S; Lindenbergh, A; Sijen, T

2016-03-01

Especially when minute evidentiary traces are analysed, background cell material unrelated to the crime may contribute to detectable levels in the genetic analyses. To gain understanding on the composition of human cell material residing on surfaces contributing to background traces, we performed DNA and mRNA profiling on samplings of various items. Samples were selected by considering events contributing to cell material deposits in exemplary activities (e.g. dragging a person by the trouser ankles), and can be grouped as public objects, private samples, transfer-related samples and washing machine experiments. Results show that high DNA yields do not necessarily relate to an increased number of contributors or to the detection of other cell types than skin. Background cellular material may be found on any type of public or private item. When a major contributor can be deduced in DNA profiles from private items, this can be a different person than the owner of the item. Also when a specific activity is performed and the areas of physical contact are analysed, the "perpetrator" does not necessarily represent the major contributor in the STR profile. Washing machine experiments show that transfer and persistence during laundry is limited for DNA and cell type dependent for RNA. Skin conditions such as the presence of sebum or sweat can promote DNA transfer. Results of this study, which encompasses 549 samples, increase our understanding regarding the prevalence of human cell material in background and activity scenarios. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Does Paired Mentoring Work? A Study of the Effectiveness and Affective Value of Academically Asymmetrical Peer Mentoring in Supporting Disadvantaged Students in School Science

ERIC Educational Resources Information Center

Sharpe, Rachael; Abrahams, Ian; Fotou, Nikolaos

2018-01-01

Background: In England, there is a growing need to improve the lives of secondary school students who are defined as disadvantaged and to support these students in their attainment and attitudes to secondary school science. Purpose: This paper reports on a project designed to support students from disadvantaged backgrounds by pairing them with…

'PACLIMS': A component LIM system for high-throughput functional genomic analysis

PubMed Central

Donofrio, Nicole; Rajagopalon, Ravi; Brown, Douglas; Diener, Stephen; Windham, Donald; Nolin, Shelly; Floyd, Anna; Mitchell, Thomas; Galadima, Natalia; Tucker, Sara; Orbach, Marc J; Patel, Gayatri; Farman, Mark; Pampanwar, Vishal; Soderlund, Cari; Lee, Yong-Hwan; Dean, Ralph A

2005-01-01

Background Recent advances in sequencing techniques leading to cost reduction have resulted in the generation of a growing number of sequenced eukaryotic genomes. Computational tools greatly assist in defining open reading frames and assigning tentative annotations. However, gene functions cannot be asserted without biological support through, among other things, mutational analysis. In taking a genome-wide approach to functionally annotate an entire organism, in this application the ~11,000 predicted genes in the rice blast fungus (Magnaporthe grisea), an effective platform for tracking and storing both the biological materials created and the data produced across several participating institutions was required. Results The platform designed, named PACLIMS, was built to support our high throughput pipeline for generating 50,000 random insertion mutants of Magnaporthe grisea. To be a useful tool for materials and data tracking and storage, PACLIMS was designed to be simple to use, modifiable to accommodate refinement of research protocols, and cost-efficient. Data entry into PACLIMS was simplified through the use of barcodes and scanners, thus reducing the potential human error, time constraints, and labor. This platform was designed in concert with our experimental protocol so that it leads the researchers through each step of the process from mutant generation through phenotypic assays, thus ensuring that every mutant produced is handled in an identical manner and all necessary data is captured. Conclusion Many sequenced eukaryotes have reached the point where computational analyses are no longer sufficient and require biological support for their predicted genes. Consequently, there is an increasing need for platforms that support high throughput genome-wide mutational analyses. While PACLIMS was designed specifically for this project, the source and ideas present in its implementation can be used as a model for other high throughput mutational endeavors. PMID:15826298

Spectroscopic Observations of a Solar Flare and the Associated Coronal Mass Ejection

NASA Astrophysics Data System (ADS)

Murray, S.; Tian, H.; McKillop, S.

2013-12-01

We used data from the EUV Imaging Spectrometer (EIS) on board Hinode to examine a coronal mass ejection and a preceding flare observed on 21 November 2012 between 15:00 and 17:00 UT. Images from the Atmospheric Imaging Assembly on the Solar Dynamics Observatory were used to align the data from EIS with specific events occurring. We analyzed spectra of a few emission lines at three locations on the flare site and one location in the erupting prominence. On the flare site, we found line profiles showing typical characteristics of chromospheric evaporation: downflows at cooler lines and upflows at hotter lines. At one particular location on the flare site, we clearly identified dominant downflows on the order of 100 km/s in lines through Fe VIII to Fe XVI. To the best of our knowledge, this is the first time that such strong high-speed downflows have been spectroscopically observed in the impulsive phase of solar flares. The profile of the Fe VIII 184.54 line reveals two peaks and we were able to use the double Gaussian fit to separate the rapid downflows of dense material from the nearly stationary coronal background emission. For the erupting prominence, we were able to analyze multiple lines, cooler and warmer, of interest using this double Gaussian fit to separate the background emission from the emission of the ejected material. Our results show that the LOS velocities of the ejected material are about 100 km/s in the lower corona. Additionally, in each region of interest, we used the ratio of the density-sensitive line pair FeXII 195/186 to determine the electron density. Our results clearly show that the coronal densities were greatly enhanced during the flare. The density of the ejected material is also much larger than the typical coronal density. This research was supported by the NSF grant for the Solar Physics REU Program at the Smithsonian Astrophysical Observatory (AGS-1263241).

Determination of target detection limits in hyperspectral data using band selection and dimensionality reduction

NASA Astrophysics Data System (ADS)

Gross, W.; Boehler, J.; Twizer, K.; Kedem, B.; Lenz, A.; Kneubuehler, M.; Wellig, P.; Oechslin, R.; Schilling, H.; Rotman, S.; Middelmann, W.

2016-10-01

Hyperspectral remote sensing data can be used for civil and military applications to robustly detect and classify target objects. High spectral resolution of hyperspectral data can compensate for the comparatively low spatial resolution, which allows for detection and classification of small targets, even below image resolution. Hyperspectral data sets are prone to considerable spectral redundancy, affecting and limiting data processing and algorithm performance. As a consequence, data reduction strategies become increasingly important, especially in view of near-real-time data analysis. The goal of this paper is to analyze different strategies for hyperspectral band selection algorithms and their effect on subpixel classification for different target and background materials. Airborne hyperspectral data is used in combination with linear target simulation procedures to create a representative amount of target-to-background ratios for evaluation of detection limits. Data from two different airborne hyperspectral sensors, AISA Eagle and Hawk, are used to evaluate transferability of band selection when using different sensors. The same target objects were recorded to compare the calculated detection limits. To determine subpixel classification results, pure pixels from the target materials are extracted and used to simulate mixed pixels with selected background materials. Target signatures are linearly combined with different background materials in varying ratios. The commonly used classification algorithms Adaptive Coherence Estimator (ACE) is used to compare the detection limit for the original data with several band selection and data reduction strategies. The evaluation of the classification results is done by assuming a fixed false alarm ratio and calculating the mean target-to-background ratio of correctly detected pixels. The results allow drawing conclusions about specific band combinations for certain target and background combinations. Additionally, generally useful wavelength ranges are determined and the optimal amount of principal components is analyzed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coker, Eric Nicholas; Rodriguez, Mark A.; Ambrosini, Andrea

Hydrogen and carbon monoxide may be produced using solar-thermal energy in two-stage reactions of water and carbon dioxide, respectively, over certain metal oxide materials. The most active materials observed experimentally for these processes are complex mixtures of ferrite and zirconia based solids, and it is not clear how far the ferrites, the zirconia, or a solid solution between the two participate in the change of oxidation state during the cycling. Identification of the key phases in the redox material that enable splitting is of paramount importance to developing a working model of the materials. A three-pronged approach was adopted here:more » computer modeling to determine thermodynamically favorable materials compositions, bench reactor testing to evaluate materials’ performance, and in-situ characterization of reactive materials to follow phase changes and identify the phases active for splitting. For the characterization and performance evaluation thrusts, cobalt ferrites were prepared by co-precipitation followed by annealing at 1400 °C. An in-situ X-ray diffraction capability was developed and tested, allowing phase monitoring in real time during thermochemical redox cycling. Key observations made for an un-supported cobalt ferrite include: 1) ferrite phases partially reduce to wustite upon heating to 1400 °C in helium; 2) exposing the material to air at 1100 °C causes immediate re-oxidation; 3) the re-oxidized material may be thermally reduced at 1400 °C under inert; 4) exposure of a reduced material to CO 2 results in gradual re-oxidation at 1100 °C, but minimization of background O 2-levels is essential; 5) even after several redox cycles, the lattice parameters of the ferrites remain constant, indicating that irreversible phase separation does not occur, at least over the first five cycles; 6) substituting chemical (hydrogen) reduction for thermal reduction resulted in formation of a CoFe metallic alloy. Materials were also evaluated for their CO 2-splitting performance in bench reactor systems utilizing chemical reduction in place of thermal reduction. These tests lead to the following general conclusions: 1) despite over-reduction of the cobalt ferrite phase to CoFe alloy on chemical reduction, splitting of CO 2 still occurs; 2) the kinetics of chemical reduction follow the sequence: un-supported < ZrO 2-supported < yttria-stabilized ZrO 2 (YSZ)-supported ferrite; 3) ferrite/YSZ re-oxidizes faster than ferrite/ZrO 2 under CO 2 in the range 400 – 700 °C. The temperature and pressure regimes in which the thermal reduction and water-splitting steps are thermodynamically favorable in terms of the enthalpy and entropy of oxide reduction, were determined. These metrics represent a useful design goal for any proposed water-splitting cycle. Applying this theoretical framework to available thermodynamic data, it was shown that none of the 105 binary oxide redox couples that were screened possess both energetically favorable reduction and oxidation steps. However, several driving forces, including low pressure and a large positive solid-state entropy of reduction of the oxide, have the potential to enable thermodynamically-favored two-step cycles.« less

Cosmic Microwave Background Timeline

Science.gov Websites

about 2.3 K 1948: George Gamow, Ralph Alpher, and Robert Herman predict that a Big Bang universe perfect blackbody spectrum and thereby strongly supporting the hot big bang model, the thermal history of anisotropy in the cosmic microwave background, this strongly supports the big bang model with gravitational

Measures of Success for Earth System Science Education: The DLESE Evaluation Services and the Evaluation Toolkit Collection

NASA Astrophysics Data System (ADS)

McCaffrey, M. S.; Buhr, S. M.; Lynds, S.

2005-12-01

Increased agency emphasis upon the integration of research and education coupled with the ability to provide students with access to digital background materials, learning activities and primary data sources has begun to revolutionize Earth science education in formal and informal settings. The DLESE Evaluation Services team and the related Evaluation Toolkit collection (http://www.dlese.org/cms/evalservices/ ) provides services and tools for education project leads and educators. Through the Evaluation Toolkit, educators may access high-quality digital materials to assess students' cognitive gains, examples of alternative assessments, and case studies and exemplars of authentic research. The DLESE Evaluation Services team provides support for those who are developing evaluation plans on an as-requested basis. In addition, the Toolkit provides authoritative peer reviewed articlesabout evaluation research techniques and strategies of particular importance to geoscience education. This paper will provide an overview of the DLESE Evaluation Toolkit and discuss challenges and best practices for assessing student learning and evaluating Earth system sciences education in a digital world.

The Role of Introductory Geosciences in Students' Quantitative Literacy

NASA Astrophysics Data System (ADS)

Wenner, J. M.; Manduca, C.; Baer, E. M.

2006-12-01

Quantitative literacy is more than mathematics; it is about reasoning with data. Colleges and universities have begun to recognize the distinction between mathematics and quantitative literacy, modifying curricula to reflect the need for numerate citizens. Although students may view geology as 'rocks for jocks', the geosciences are truthfully rife with data, making introductory geoscience topics excellent context for developing the quantitative literacy of students with diverse backgrounds. In addition, many news items that deal with quantitative skills, such as the global warming phenomenon, have their basis in the Earth sciences and can serve as timely examples of the importance of quantitative literacy for all students in introductory geology classrooms. Participants at a workshop held in 2006, 'Infusing Quantitative Literacy into Introductory Geoscience Courses,' discussed and explored the challenges and opportunities associated with the inclusion of quantitative material and brainstormed about effective practices for imparting quantitative literacy to students with diverse backgrounds. The tangible results of this workshop add to the growing collection of quantitative materials available through the DLESE- and NSF-supported Teaching Quantitative Skills in the Geosciences website, housed at SERC. There, faculty can find a collection of pages devoted to the successful incorporation of quantitative literacy in introductory geoscience. The resources on the website are designed to help faculty to increase their comfort with presenting quantitative ideas to students with diverse mathematical abilities. A methods section on "Teaching Quantitative Literacy" (http://serc.carleton.edu/quantskills/methods/quantlit/index.html) focuses on connecting quantitative concepts with geoscience context and provides tips, trouble-shooting advice and examples of quantitative activities. The goal in this section is to provide faculty with material that can be readily incorporated into existing introductory geoscience courses. In addition, participants at the workshop (http://serc.carleton.edu/quantskills/workshop06/index.html) submitted and modified more than 20 activities and model courses (with syllabi) designed to use best practices for helping introductory geoscience students to become quantitatively literate. We present insights from the workshop and other sources for a framework that can aid in increasing quantitative literacy of students from a variety of backgrounds in the introductory geoscience classroom.

Graphene as a protein crystal mounting material to reduce background scatter.

PubMed

Wierman, Jennifer L; Alden, Jonathan S; Kim, Chae Un; McEuen, Paul L; Gruner, Sol M

2013-10-01

The overall signal-to-noise ratio per unit dose for X-ray diffraction data from protein crystals can be improved by reducing the mass and density of all material surrounding the crystals. This article demonstrates a path towards the practical ultimate in background reduction by use of atomically thin graphene sheets as a crystal mounting platform for protein crystals. The results show the potential for graphene in protein crystallography and other cases where X-ray scatter from the mounting material must be reduced and specimen dehydration prevented, such as in coherent X-ray diffraction imaging of microscopic objects.

Graphene as a protein crystal mounting material to reduce background scatter

PubMed Central

Wierman, Jennifer L.; Alden, Jonathan S.; Kim, Chae Un; McEuen, Paul L.; Gruner, Sol M.

2013-01-01

The overall signal-to-noise ratio per unit dose for X-ray diffraction data from protein crystals can be improved by reducing the mass and density of all material surrounding the crystals. This article demonstrates a path towards the practical ultimate in background reduction by use of atomically thin graphene sheets as a crystal mounting platform for protein crystals. The results show the potential for graphene in protein crystallography and other cases where X-ray scatter from the mounting material must be reduced and specimen dehydration prevented, such as in coherent X-ray diffraction imaging of microscopic objects. PMID:24068843

Anchored nanostructure materials and method of fabrication

DOEpatents

Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

2012-11-27

Anchored nanostructure materials and methods for their fabrication are described. The anchored nanostructure materials may utilize nano-catalysts that include powder-based or solid-based support materials. The support material may comprise metal, such as NiAl, ceramic, a cermet, or silicon or other metalloid. Typically, nanoparticles are disposed adjacent a surface of the support material. Nanostructures may be formed as anchored to nanoparticles that are adjacent the surface of the support material by heating the nano-catalysts and then exposing the nano-catalysts to an organic vapor. The nanostructures are typically single wall or multi-wall carbon nanotubes.

In-situ materials processing systems and bioregenerative life support systems interrelationships

NASA Technical Reports Server (NTRS)

Mignon, George V.; Frye, Robert J.

1992-01-01

The synergy and linkages between bioregenerative life support systems and the materials produced by in-situ materials processing systems was investigated. Such systems produce a broad spectrum of byproducts such as oxygen, hydrogen, processed soil material, ceramics, refractory, and other materials. Some of these materials may be utilized by bioregenerative systems either directly or with minor modifications. The main focus of this project was to investigate how these materials can be utilized to assist a bioregenerative life support system. Clearly the need to provide a sustainable bioregenerative life support system for long term human habitation of space is significant.

Pesticide Program Dialogue Committee - June 5-6, 2014 Materials

EPA Pesticide Factsheets

This PPDC meeting included sessions on the budget, 21st century toxicity testing, polllinator protection, school IPM, and the endocrine disruptor screening program. View presentation materials for those topics plus other background materials and updates.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiaro, P.J.

A series of tests were performed at Oak Ridge National Laboratory (ORNL) to evaluate and characterize the radiological response of a ''Cricket'' radiation detection system. The ''Cricket'' is manufactured by RAD/COMM Systems Corp., which is located in Ontario, Canada. The system is designed to detect radioactive material that may be contained in scrap metal. The Cricket's detection unit is mounted to the base of a grappler and monitors material, while the grappler's tines hold the material. It can also be used to scan material in an attempt to isolate radioactive material if an alarm occurs. Testing was performed at themore » Environmental Effects Laboratory located at ORNL and operated by the Engineering Science and Technology Division. Tests performed included the following: (1) Background stability, (2) Energy response using {sup 241}Am, {sup 137}Cs, and {sup 60}Co, (3) Surface uniformity, (4) Angular dependence, (5) Alarm actuation, (6) Alarm threshold vs. background, (7) Shielding, (8) Response to {sup 235}U, (9) Response to neutrons using unmoderated {sup 252}Cf, and (10) Response to transient radiation. This report presents a summary of the test results. Background measurements were obtained prior to the performance of each individual test.« less

Research progress of cholesteric liquid crystals with broadband reflection characteristics in application of intelligent optical modulation materials

NASA Astrophysics Data System (ADS)

Zhang, Lan-Ying; Gao, Yan-Zi; Song, Ping; Wu, Xiao-Juan; Yuan, Xiao; He, Bao-Feng; Chen, Xing-Wu; Hu, Wang; Guo, Ren-Wei; Ding, Hang-Jun; Xiao, Jiu-Mei; Yang, Huai

2016-09-01

Cholesteric liquid crystals (CLCs) have recently sparked an enormous amount of interest in the development of soft matter materials due to their unique ability to self-organize into a helical supra-molecular architecture and their excellent selective reflection of light based on the Bragg relationship. Nowadays, by the virtue of building the self-organized nanostructures with pitch gradient or non-uniform pitch distribution, extensive work has already been performed to obtain CLC films with a broad reflection band. Based on authors’ many years’ research experience, this critical review systematically summarizes the physical and optical background of the CLCs with broadband reflection characteristics, methods to obtain broadband reflection of CLCs, as well as the application in the field of intelligent optical modulation materials. Combined with the research status and the advantages in the field, the important basic and applied scientific problems in the research direction are also introduced. Project supported by the National Natural Science Foundation of China (Grant Nos. 51573006, 51573003, 51203003, 51303008, 51302006, 51402006, 51272026, and 51273022), the Major Project of Beijing Science and Technology Program, China (Grant Nos. Z151100003315023 and Z141100003814011), and the Fok Ying Tung Education Foundation, China (Grant No. 142009).

Heterogeneous fenton catalysts based on activated carbon and related materials.

PubMed

Navalon, Sergio; Dhakshinamoorthy, Amarajothi; Alvaro, Mercedes; Garcia, Hermenegildo

2011-12-16

The Fenton reaction is widely used for remediation of waste water and for the degradation of organic pollutants in water. Currently, there is considerable interest to convert the classical Fenton reaction, which consumes stoichiometric amounts of iron(II) salts, into a catalytic process that is promoted by a solid. This review describes the work that has used carbonaceous materials either directly as catalysts or, more frequently, as a large-area support for catalytically activated transition metals or metal-oxide nanoparticles. The interest in this type of catalyst derives from the wide use of carbon in conventional water treatments and the wide applicability of the Fenton reaction. After two general sections that illustrate the scope and background of Fenton chemistry, the review describes the activity of activated carbon in the absence or presence of metal-containing particles. The last sections of the review focus on different types of carbonaceous materials, such as carbon nanotubes and diamond nanoparticles. The review concludes with a section that anticipates future developments in this area, which are aimed at overcoming the current limitations of low activity and occurrence of metal leaching. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Assessing the impact of background spectral graph construction techniques on the topological anomaly detection algorithm

NASA Astrophysics Data System (ADS)

Ziemann, Amanda K.; Messinger, David W.; Albano, James A.; Basener, William F.

2012-06-01

Anomaly detection algorithms have historically been applied to hyperspectral imagery in order to identify pixels whose material content is incongruous with the background material in the scene. Typically, the application involves extracting man-made objects from natural and agricultural surroundings. A large challenge in designing these algorithms is determining which pixels initially constitute the background material within an image. The topological anomaly detection (TAD) algorithm constructs a graph theory-based, fully non-parametric topological model of the background in the image scene, and uses codensity to measure deviation from this background. In TAD, the initial graph theory structure of the image data is created by connecting an edge between any two pixel vertices x and y if the Euclidean distance between them is less than some resolution r. While this type of proximity graph is among the most well-known approaches to building a geometric graph based on a given set of data, there is a wide variety of dierent geometrically-based techniques. In this paper, we present a comparative test of the performance of TAD across four dierent constructs of the initial graph: mutual k-nearest neighbor graph, sigma-local graph for two different values of σ > 1, and the proximity graph originally implemented in TAD.

Plasmonics-based detection of H(2) and CO: discrimination between reducing gases facilitated by material control.

PubMed

Dharmalingam, Gnanaprakash; Joy, Nicholas A; Grisafe, Benjamin; Carpenter, Michael A

2012-01-01

Monitoring emissions in high-temperature-combustion applications is very important for regulating the discharge of gases such as NO(2) and CO as well as unburnt fuel into the environment. This work reports the detection of H(2) and CO gases by employing a metal-metal oxide nanocomposite (gold-yttria stabilized zirconia (Au-YSZ)) film fabricated through layer-by-layer physical vapor deposition (PVD). The change in the peak position of the localized surface plasmon resonance (LSPR) was monitored as a function of time and gas concentration. The responses of the films were preferential towards H(2), as observed from the results of exposing the films to the gases at temperatures of 500 °C in a background of dry air. Characterization of the samples by XRD and SEM enabled the correlation of material properties with the differences in the CO- and H(2)-induced LSPR peak shifts, including the relative desensitization towards NO(2). Sensing characteristics of films with varying support thicknesses and metal-particle diameters have been studied, and the results are presented. A comparison has been made to films fabricated through co-sputtered PVD, and the calibration curves of the sensing response show a preferential response towards H(2). The distinction between H(2) and CO responses is also seen through the use of principal-component analysis (PCA). Such material arrangements, which can be tuned for their selectivity by changing certain parameters such as particle size, support thickness, etc., have direct applications within optical chemical sensors for turbine engines, solid-oxide fuel cells, and other high-temperature applications.

The Concept of Culture. Teacher's Background Material for the American, the Arunta, the Kazak. Grade One and Grade Four. Publications No. 3, 4 and 5.

ERIC Educational Resources Information Center

Hunt, Anne; And Others

This guide presents background material to acquaint elementary social studies teachers with the cultural systems of the Arunta and Kazak tribes and the more technologically sophisticated American way of life. It is part of the Anthropology Curriculum Project and is designed to be used in conjunction with curriculum guides for grades 1 and 4 (SO…

The 13C(α,n)16O reaction: A background source for underground astrophysics measurements and geo-neutrino measurements

NASA Astrophysics Data System (ADS)

Febbraro, Michael; Toomey, Rebecca; Deboer, James; Pain, Steven; Peters, William; Smith, Karl; Becchetti, Fred; Wiescher, Michael

2016-09-01

In this study, we present results for a neutron spectroscopic study of the 13C(α,n)16O reaction between E α = 3 . 5 and 7.5 MeV performed at the University of Notre Dame Nuclear Science Laboratory. The neutron spectroscopy measurement was performed with deuterated liquid scintillator detectors capable of extracting neutron energy spectra without neutron time-of-flight measurement using spectral unfolding technique. This permitted extraction of the ground state contribution as well as excited state contributions to the total reaction cross section. The usefulness of this technique for the measurement of beam-induced neutron background sources in deep underground nuclear astrophysics measurements will be shown. Results showing the contributions of excited state components to the total cross section will be given and their implication to geo-neutrino measurements will be discussed. This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, NSF Grant PHY0969456, PHY1401343, and Defense Nuclear Nonproliferation R&D (NA-22).

Updating working memory in aircraft noise and speech noise causes different fMRI activations

PubMed Central

Sætrevik, Bjørn; Sörqvist, Patrik

2015-01-01

The present study used fMRI/BOLD neuroimaging to investigate how visual-verbal working memory is updated when exposed to three different background-noise conditions: speech noise, aircraft noise and silence. The number-updating task that was used can distinguish between “substitution processes,” which involve adding new items to the working memory representation and suppressing old items, and “exclusion processes,” which involve rejecting new items and maintaining an intact memory set. The current findings supported the findings of a previous study by showing that substitution activated the dorsolateral prefrontal cortex, the posterior medial frontal cortex and the parietal lobes, whereas exclusion activated the anterior medial frontal cortex. Moreover, the prefrontal cortex was activated more by substitution processes when exposed to background speech than when exposed to aircraft noise. These results indicate that (a) the prefrontal cortex plays a special role when task-irrelevant materials should be denied access to working memory and (b) that, when compensating for different types of noise, either different cognitive mechanisms are involved or those cognitive mechanisms that are involved are involved to different degrees. PMID:25352319

Radioactivities of Long Duration Exposure Facility (LDEF) materials: Baggage and bonanzas

NASA Technical Reports Server (NTRS)

Smith, Alan R.; Hurley, Donna L.

1992-01-01

Radioactivities in materials onboard the returned Long Duration Exposure Facility (LDEF) satellite were studied by a variety of techniques. Among the most powerful is low-background Ge-semiconductor detector gamma-ray spectrometry, illustrated here by results obtained at the Lawrence Berkeley Laboratory's (LBL) Low Background Facilities. The observed radioactivities are of two origins: those radionuclides produced by nuclear reactions with the radiation field in orbit, and radionuclides present initially as 'contaminants' in materials used for construction of the spacecraft and experimental assemblies. In the first category are experiment-related monitor foils and tomato seeds, and such spacecraft materials as aluminum, stainless steel, and titanium. In the second category are aluminum, beryllium, titanium, vanadium, and some special glasses.

Iranian Azeri women's perceptions of unintended pregnancy: A qualitative study

PubMed Central

Mohammadi, Easa; Nourizadeh, Roghaiyeh; Simbar, Masoumeh

2015-01-01

Background: Many women, throughout their life cycle, experience unintended pregnancy and its subsequent induced abortion. Nonetheless, women's perceptions of this phenomenon – particularly in countries prohibiting elective abortion – are poorly known. The aim of this study was to explore Iranian Azeri women's perceptions of unintended pregnancy. Materials and Methods: This was a conventional content analysis study conducted in Tabriz, Iran. The data were collected through 31 semi-structured interviews with 23 women who had recently experienced an unintended pregnancy. The study participants were recruited using the purposive sampling method. Sampling started in March 2013 and continued until reaching data saturation, i.e. till August 2013. Data analysis was carried out concurrently with data collection. MAXQDA 10.0 software was employed for managing the study data. Results: The study data analysis process yielded the formation of three main themes including negative effects of unintended pregnancy on daily life, fear of being stigmatized with violating social norms, and abortion panic, which in turn constituted the broader overarching theme of “threat supposition.” In other words, following an unintended pregnancy, the study participants had experienced different levels of fear and threat depending on their personal, family, and socio-cultural backgrounds. Conclusions: Women perceive unintended pregnancy as a challenging and threatening situation. An unintended pregnancy can threaten women's lives through social deprivations, growing instability, and putting both mother and baby at risk for physical and psychosocial problems. On the other hand, an unsafe illegal abortion could have potentially life-threatening complications. To cope with such a situation, women need strong social support. Healthcare providers can fulfill such women's need for support by developing pre-abortion counseling services and providing them with professional counseling. Also, strengthening women's support system by policy-makers is recommended. PMID:25878705

Backgrounds in Language.

ERIC Educational Resources Information Center

Maxwell, John C.; Long, Barbara K.

"Backgrounds in Language," a field-tested inservice course designed for use by groups of 15 or 25 language arts teachers, provides the subject matter background teachers need to make informed decisions about what curriculum materials to use in what way, at what time, and with which students. The course is comprised of eight 2-hour sessions,…

Biomedical Big Data Training Collaborative (BBDTC): An effort to bridge the talent gap in biomedical science and research.

PubMed

Purawat, Shweta; Cowart, Charles; Amaro, Rommie E; Altintas, Ilkay

2016-06-01

The BBDTC (https://biobigdata.ucsd.edu) is a community-oriented platform to encourage high-quality knowledge dissemination with the aim of growing a well-informed biomedical big data community through collaborative efforts on training and education. The BBDTC collaborative is an e-learning platform that supports the biomedical community to access, develop and deploy open training materials. The BBDTC supports Big Data skill training for biomedical scientists at all levels, and from varied backgrounds. The natural hierarchy of courses allows them to be broken into and handled as modules . Modules can be reused in the context of multiple courses and reshuffled, producing a new and different, dynamic course called a playlist . Users may create playlists to suit their learning requirements and share it with individual users or the wider public. BBDTC leverages the maturity and design of the HUBzero content-management platform for delivering educational content. To facilitate the migration of existing content, the BBDTC supports importing and exporting course material from the edX platform. Migration tools will be extended in the future to support other platforms. Hands-on training software packages, i.e., toolboxes , are supported through Amazon EC2 and Virtualbox virtualization technologies, and they are available as: ( i ) downloadable lightweight Virtualbox Images providing a standardized software tool environment with software packages and test data on their personal machines, and ( ii ) remotely accessible Amazon EC2 Virtual Machines for accessing biomedical big data tools and scalable big data experiments. At the moment, the BBDTC site contains three open Biomedical big data training courses with lecture contents, videos and hands-on training utilizing VM toolboxes, covering diverse topics. The courses have enhanced the hands-on learning environment by providing structured content that users can use at their own pace. A four course biomedical big data series is planned for development in 2016.

The effectiveness of a supportive educative group intervention on family caregiver burden of patients with heart failure

PubMed Central

Etemadifar, Shahram; Bahrami, Masoud; Shahriari, Mohsen; Farsani, Alireza Khosravi

2014-01-01

Background: Living with heart failure patients is a complex situation for family caregivers. Few studies have been conducted to examine the effects of interventional programs to ease this condition. The purpose of this study was to determine the effectiveness of a supportive educative group intervention in reducing family caregivers’ burden of caregiving. Materials and Methods: This randomized clinical trail was conducted at a selective teaching hospital in Isfahan, Iran in 2012. The intervention consisted of four weekly multimedia training sessions of 2 h that included education and family support for 50 family caregivers. Caregiver burden was measured using the Zarit Burden Interview (ZBI). Paired t-test, Student's t-tests, and repeated measures analysis of variance (ANOVA) were used to test for significant differences of the mean scores of burden between the intervention and control groups over a 3-month period. Results: The intervention was successful in reducing caregiver burden over time both at the end of the intervention period (P = 0.000) and 3 months after the intervention (P = 0.000). Conclusions: Nurses and other healthcare providers can use the findings of this study in order to implement effective programs to reduce family caregivers’ challenges and to provide them more support. PMID:24949057

NASA Task Load Index (TLX). Volume 1.0; Computerized Version

NASA Technical Reports Server (NTRS)

Hart, Sandra G.

1986-01-01

This booklet and the accompanying diskette contain the materials necessary to collect subjective workload assessments with the NASA Task Load Index on IBM PC compatible microcomputers. This procedure for collecting workload ratings was developed by the Human Performance Group at NASA Ames Research Center during a three year research effort that involved more than 40 laboratory, simulation, and inflight experiments Although the technique is still undergoing evaluation, this package is being distributed to allow other researchers to use it in their own experiments Comments or suggestions about the procedure would be greatly appreciated This package is intended to fill a "nuts and bolts" function of describing the procedure. A bibliography provides background information about previous empirical findings and the logic that supports the procedure.

Construction of In-house Databases in a Corporation

NASA Astrophysics Data System (ADS)

Tamura, Haruki; Mezaki, Koji

This paper describes fundamental idea of technical information management in Mitsubishi Heavy Industries, Ltd., and present status of the activities. Then it introduces the background and history of the development, problems and countermeasures against them regarding Mitsubishi Heavy Industries Technical Information Retrieval System (called MARON) which started its service in May, 1985. The system deals with databases which cover information common to the whole company (in-house research and technical reports, holding information of books, journals and so on), and local information held in each business division or department. Anybody from any division can access to these databases through the company-wide network. The in-house interlibrary loan subsystem called Orderentry is available, which supports acquiring operation of original materials.

Full-Spectrum-Analysis Isotope ID

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, Dean J.; Harding, Lee; Thoreson, Gregory G.

2017-06-28

FSAIsotopeID analyzes gamma ray spectra to identify radioactive isotopes (radionuclides). The algorithm fits the entire spectrum with combinations of pre-computed templates for a comprehensive set of radionuclides with varying thicknesses and compositions of shielding materials. The isotope identification algorithm is suitable for the analysis of spectra collected by gamma-ray sensors ranging from medium-resolution detectors, such a NaI, to high-resolution detectors, such as HPGe. In addition to analyzing static measurements, the isotope identification algorithm is applied for the radiation search applications. The search subroutine maintains a running background spectrum that is passed to the isotope identification algorithm, and it also selectsmore » temporal integration periods that optimize the responsiveness and sensitivity. Gain stabilization is supported for both types of applications.« less

Frequency response of a supported thermocouple wire: Effects of axial conduction

NASA Technical Reports Server (NTRS)

Forney, L. J.; Meeks, E. L.; Fralick, G. C.

1991-01-01

Theoretical expressions are derived for the steady-state frequency response of a supported thermocouple wire. In particular, the effects of axial heat conduction are demonstrated for both a supported one material wire and a two material wire with unequal material properties across the junction. For the case of a one material supported wire, an exact solution is derived which compares favorably with an approximate expression that only matches temperatures at the support junction. Moreover, for the case of a two material supported wire, an analytical expression is derived that closely correlates numerical results. Experimental data were taken with a type K supported thermocouple. The test thermocouple was constructed with dimensions to demonstrate the effects of axial heat conduction assuming constant physical properties across the junction.

Is Europe putting theory into practice? A qualitative study of the level of self-management support in chronic care management approaches

PubMed Central

2013-01-01

Background Self-management support is a key component of effective chronic care management, yet in practice appears to be the least implemented and most challenging. This study explores whether and how self-management support is integrated into chronic care approaches in 13 European countries. In addition, it investigates the level of and barriers to implementation of support strategies in health care practice. Methods We conducted a review among the 13 participating countries, based on a common data template informed by the Chronic Care Model. Key informants presented a sample of representative chronic care approaches and related self-management support strategies. The cross-country review was complemented by a Dutch case study of health professionals’ views on the implementation of self-management support in practice. Results Self-management support for chronically ill patients remains relatively underdeveloped in Europe. Similarities between countries exist mostly in involved providers (nurses) and settings (primary care). Differences prevail in mode and format of support, and materials used. Support activities focus primarily on patients’ medical and behavioral management, and less on emotional management. According to Dutch providers, self-management support is not (yet) an integral part of daily practice; implementation is hampered by barriers related to, among others, funding, IT and medical culture. Conclusions Although collaborative care for chronic conditions is becoming more important in European health systems, adequate self-management support for patients with chronic disease is far from accomplished in most countries. There is a need for better understanding of how we can encourage both patients and health care providers to engage in productive interactions in daily chronic care practice, which can improve health and social outcomes. PMID:23530744

Material Demand Studies: Materials Sorption of Vaporized Hydrogen Peroxide

DTIC Science & Technology

2010-06-01

SORPTION OF VAPORIZED HYDROGEN PEROXIDE Lawrence R. Procell Zoe A. Hess David G. Gehring Joseph T. Lynn Philip W. Bartram Teri Lalain RESEARCH AND...2010 2. REPORT TYPE Final 3. DATES COVERED (From - To) Nov 2003 - Jul 2005 4. TITLE AND SUBTITLE Material Demand Studies: Materials Sorption of...of office surfaces 33 \\i MATERIAL DEMAND STUDIES: MATERIALS SORPTION OF VAPORIZED HYDROGEN PEROXIDE 1. BACKGROUND The Material Demand effort was

Avogadro: an advanced semantic chemical editor, visualization, and analysis platform

PubMed Central

2012-01-01

Background The Avogadro project has developed an advanced molecule editor and visualizer designed for cross-platform use in computational chemistry, molecular modeling, bioinformatics, materials science, and related areas. It offers flexible, high quality rendering, and a powerful plugin architecture. Typical uses include building molecular structures, formatting input files, and analyzing output of a wide variety of computational chemistry packages. By using the CML file format as its native document type, Avogadro seeks to enhance the semantic accessibility of chemical data types. Results The work presented here details the Avogadro library, which is a framework providing a code library and application programming interface (API) with three-dimensional visualization capabilities; and has direct applications to research and education in the fields of chemistry, physics, materials science, and biology. The Avogadro application provides a rich graphical interface using dynamically loaded plugins through the library itself. The application and library can each be extended by implementing a plugin module in C++ or Python to explore different visualization techniques, build/manipulate molecular structures, and interact with other programs. We describe some example extensions, one which uses a genetic algorithm to find stable crystal structures, and one which interfaces with the PackMol program to create packed, solvated structures for molecular dynamics simulations. The 1.0 release series of Avogadro is the main focus of the results discussed here. Conclusions Avogadro offers a semantic chemical builder and platform for visualization and analysis. For users, it offers an easy-to-use builder, integrated support for downloading from common databases such as PubChem and the Protein Data Bank, extracting chemical data from a wide variety of formats, including computational chemistry output, and native, semantic support for the CML file format. For developers, it can be easily extended via a powerful plugin mechanism to support new features in organic chemistry, inorganic complexes, drug design, materials, biomolecules, and simulations. Avogadro is freely available under an open-source license from http://avogadro.openmolecules.net. PMID:22889332

The importance of supporting autonomy and perceived competence in facilitating long-term tobacco abstinence

PubMed Central

Williams, Geoffrey C.; Niemiec, Christopher P.; Patrick, Heather; Ryan, Richard M.; Deci, Edward L.

2010-01-01

Background The Public Health Service (PHS) Guideline for Treating Tobacco Use and Dependence (1) recommends supporting autonomy and perceived competence to facilitate tobacco abstinence. Purpose To evaluate the effectiveness of an intensive tobacco-dependence intervention based on self-determination theory (SDT) and intended to support autonomy and perceived competence in facilitating long-term tobacco abstinence. Methods One thousand and six adult smokers were recruited into a randomized cessation-induction trial. Community care participants received cessation pamphlets and information on local treatment programs. Intervention participants received the same materials and were asked to meet four times with counselors over six months to discuss their health in a manner intended to support autonomy and perceived competence. The primary outcome was 24-month prolonged abstinence from tobacco. The secondary outcome was 7-day point prevalence tobacco abstinence at 24 months post-intervention. Results Smokers in the intervention were more likely to attain both tobacco abstinence outcomes and these effects were partially mediated by change in both autonomous self-regulation and perceived competence from baseline to six months. Structural equation modeling confirmed the SDT model of health-behavior change in facilitating long-term tobacco abstinence. Conclusions An intervention based on SDT and consistent with the PHS Guideline, which was intended to support autonomy and perceived competence, facilitated long-term tobacco abstinence. PMID:19373517

Negative refraction in one- and two-dimensional lossless plasma dielectric photonic crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, B.

2013-07-15

Negative refraction in one- and two-dimensional lossless plasma dielectric photonic crystals consisting of plasma and background materials is theoretically investigated and the necessary conditions for negative refraction in these two structures are obtained. The critical frequency ω{sub 0} and the bandwidth Δω for negative refraction are explored, and the parameter dependence of effects such as plasma filling factor and the dielectric constant of background materials is also examined and discussed.

Examining the career development of Mexican American middle school students: A test of social cognitive career theory

NASA Astrophysics Data System (ADS)

Navarro, Rachel Leah

This study tested portions of Lent, Brown, and Hackett's (1994) Social Cognitive Career Theory (SCCT) in the domain of mathematics and science with a sample of Mexican American middle school students. Results supported a modified path model. This study's findings supported several SCCT propositions regarding the positive relationships among background contextual affordances, learning experiences, self-efficacy, outcome expectations, interests, and goals. However, findings suggested that the influence of person inputs (i.e., gender and generational status) and some background contextual affordances (i.e., acculturation level) on learning experiences may be not be direct; instead, an indirect effect via a relationship with other background contextual affordances (i.e., perceived social support and social class) was found. Furthermore, results supported direct effects of gender on self-efficacy and learning experiences on goal intentions---two relationships not posited in SCCT. Implications for future research and counseling with Mexican American adolescents are discussed.

Advanced catalyst supports for PEM fuel cell cathodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Du, Lei; Shao, Yuyan; Sun, Junming

2016-11-01

Electrocatalyst support materials are key components for polymer exchange membrane (PEM) fuel cells, which play a critical role in determining electrocatalyst durability and activity, mass transfer and water management. The commonly-used supports, e.g. porous carbon black, cannot meet all the requirements under the harsh operation condition of PEM fuel cells. Great efforts have been made in the last few years in developing alternative support materials. In this paper, we selectively review recent progress on three types of important support materials: carbon, non-carbon and hybrid carbon-oxides nanocomposites. A perspective on future R&D of electrocatalyst support materials is also provided.

Final Technical Report [Cosmogenic background and shielding R&D for a Ge Neutrinoless Double Beta Decay Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guiseppe, Vince

2013-10-01

The USD Majorana group focused all of its effort in support of the MAJORANA DEMONSTRATOR (MJD) experiment. Final designs of the shielding subsystems are complete. Construction of the MJD shielding systems at SURF has begun and the proposed activities directly support the completion of the shield systems. The PI and the group contribute heavily to the onsite construction activities of the MJD experiment. The group led investigations into neutron and neutron-­induced backgrounds, shielding effectiveness and design, and radon backgrounds.

Role of Outgassing of ITER Vacuum Vessel In-Wall Shielding Materials in Leak Detection of ITER Vacuum Vessel

NASA Astrophysics Data System (ADS)

Maheshwari, A.; Pathak, H. A.; Mehta, B. K.; Phull, G. S.; Laad, R.; Shaikh, M. S.; George, S.; Joshi, K.; Khan, Z.

2017-04-01

ITER Vacuum Vessel is a torus-shaped, double wall structure. The space between the double walls of the VV is filled with In-Wall Shielding Blocks (IWS) and Water. The main purpose of IWS is to provide neutron shielding during ITER plasma operation and to reduce ripple of Toroidal Magnetic Field (TF). Although In-Wall Shield Blocks (IWS) will be submerged in water in between the walls of the ITER Vacuum Vessel (VV), Outgassing Rate (OGR) of IWS materials plays a significant role in leak detection of Vacuum Vessel of ITER. Thermal Outgassing Rate of a material critically depends on the Surface Roughness of material. During leak detection process using RGA equipped Leak detector and tracer gas Helium, there will be a spill over of mass 3 and mass 2 to mass 4 which creates a background reading. Helium background will have contribution of Hydrogen too. So it is necessary to ensure the low OGR of Hydrogen. To achieve an effective leak test it is required to obtain a background below 1 × 10-8 mbar 1 s-1 and hence the maximum Outgassing rate of IWS Materials should comply with the maximum Outgassing rate required for hydrogen i.e. 1 x 10-10 mbar 1 s-1 cm-2 at room temperature. As IWS Materials are special materials developed for ITER project, it is necessary to ensure the compliance of Outgassing rate with the requirement. There is a possibility of diffusing the gasses in material at the time of production. So, to validate the production process of materials as well as manufacturing of final product from this material, three coupons of each IWS material have been manufactured with the same technique which is being used in manufacturing of IWS blocks. Manufacturing records of these coupons have been approved by ITER-IO (International Organization). Outgassing rates of these coupons have been measured at room temperature and found in acceptable limit to obtain the required Helium Background. On the basis of these measurements, test reports have been generated and got approved by IO. This paper will describe the preparation, characteristics and cleaning procedure of samples, description of the system, Outgassing rate Measurement of these samples to ensure the accurate leak detection.

Recycled Art: Create Puppets Using Recycled Objects.

ERIC Educational Resources Information Center

Clearing, 2003

2003-01-01

Presents an activity from "Healthy Foods from Healthy Soils" for making puppets using recycled food packaging materials. Includes background information, materials, instructions, literature links, resources, and benchmarks. (NB)

Scanning Capacitance Microscopy | Materials Science | NREL

Science.gov Websites

obtained using scanning capacitance microscopy. Top Right: Image of p-type and n-type material, obtained 'fingers' of light-colored n-type material on a yellow and blue background representing p-type material ; measurement data were obtained using scanning capacitance microscopy. Bottom Right: Image of p-type and n-type

Competition--supporting or preventing an increased use of bioenergy?

PubMed

Thrän, Daniela; Kaltschmitt, Martin

2007-12-01

The intensified use of biomass as an energy source is an often-repeated goal of the German and European climate protection policy. Therefore, framework conditions have been created in recent years, which allow for a wider use of biomass within the energy system especially for a provision of electricity and fuels. Due to this policy, Germany, for example, has emerged as the leading producer of biogas from energy crops and fatty methyl ester (FAME) in Europe. However, due to the high energy price level, the use of biomass for heating purposes and as a renewable raw material have increased at the same time. To supply the obviously increased demand for biomass or biobased energy carriers cost efficiently, nationwide and to some extend even global markets are under development at present. As the demand for biomass is expected to continue to increase strongly, it is feared that an increasing competition with the use for food and fodder as well as a raw material might occur in the years to come. Against this background we have analyzed the competitions that can be expected, and the influence that they may have on the further expansion of the use of biomass for energy production. Experiences from Germany are provided exemplarily. Based on this, it is concluded that measures need to be taken to support an efficient and sustainable use of bioenergy in the future.

Are claims made in orthodontic journal advertisements evidence-supported?

PubMed

Livas, Christos; Kouskoura, Thaleia; Ren, Yijin; Katsaros, Christos; Pandis, Nikolaos

2015-03-01

To examine the supporting evidence of advertisements published in six leading orthodontic journals. The 2012-2013 printed issues of American Journal of Orthodontics and Dentofacial Orthopedics, Australian Orthodontic Journal, Journal of Orthodontics, European Journal of Orthodontics, Journal of Clinical Orthodontics, and Journal of Orofacial Orthopedics were screened for advertisements implying superior performance compared with competitor products. Advertisements were classified according to type of product, availability, and currency of supporting references. A total of 99 unique advertisements claiming clinical benefit or superiority were identified. The overwhelming majority of the identified advertisements promoted appliance products (62.6%), orthodontic materials (14.1%), and dental operatory equipment, including imaging systems (12.1%). Advertisements were found to provide references or not regardless of the product type. Half of the advertisements referred to at least one peer-reviewed publication, whereas unpublished studies were cited by 25% of the advertisements. Most of the referenced articles were published within the past 5 years. The scientific background of advertisements in the orthodontic literature appears limited. While surveillance of journal advertising needs to be regulated, clinicians are urged to critically appraise the claims being made in orthodontic print advertisements by consulting the associated existing evidence.

The Family Challenge of Caring for the Chronically Mentally Ill: A Phenomenological Study

PubMed Central

Shamsaei, Farshid; Cheraghi, Fatemeh; Esmaeilli, Ravanbakhsh

2015-01-01

Background: Family caregiving for patients with chronic mental illness is influenced by various factors such as political, socioeconomic, and cultural contexts as well as related policies and health services. Objectives: The purpose of this study was to explore the challenges with which the family caregivers of patients with chronic mental illness have to contend. Materials and Methods: The research design was qualitative with a phenomenological approach. The research population consisted of 16 long-term carers expressing interest in participating in the project. The carers were the family members of mentally ill relatives who collected their monthly medications at Farshchian Psychiatry Hospital in Hamadan in 2012. Purposive sampling was used to draw the sample. Data were collected by individual in-depth semi-structured interviews, which were tape-recorded and analyzed via Colaizzi’s phenomenological method. Rigor was assessed regarding credibility, dependability, conformability, and transferability. Results: Our findings highlighted 4 main themes, namely stress and emotional distress, need for education and information, socioeconomic effects and support, and physical strain. Conclusions: Families experience frustrations when providing support and care to their mentally ill relatives. They, therefore, need appropriate support and intervention by mental health services. PMID:26576169

Optimal background matching camouflage.

PubMed

Michalis, Constantine; Scott-Samuel, Nicholas E; Gibson, David P; Cuthill, Innes C

2017-07-12

Background matching is the most familiar and widespread camouflage strategy: avoiding detection by having a similar colour and pattern to the background. Optimizing background matching is straightforward in a homogeneous environment, or when the habitat has very distinct sub-types and there is divergent selection leading to polymorphism. However, most backgrounds have continuous variation in colour and texture, so what is the best solution? Not all samples of the background are likely to be equally inconspicuous, and laboratory experiments on birds and humans support this view. Theory suggests that the most probable background sample (in the statistical sense), at the size of the prey, would, on average, be the most cryptic. We present an analysis, based on realistic assumptions about low-level vision, that estimates the distribution of background colours and visual textures, and predicts the best camouflage. We present data from a field experiment that tests and supports our predictions, using artificial moth-like targets under bird predation. Additionally, we present analogous data for humans, under tightly controlled viewing conditions, searching for targets on a computer screen. These data show that, in the absence of predator learning, the best single camouflage pattern for heterogeneous backgrounds is the most probable sample. © 2017 The Authors.

Social Support for Exercise as a Predictor of Weight and Physical Activity Status Among Puerto Rican and Mexican Men: Results From the Latino Men's Health Initiative.

PubMed

Craven, Meredith R; Keefer, Laurie; Rademaker, Alfred; Dykema-Engblade, Amanda; Sanchez-Johnsen, Lisa

2018-07-01

Social support is an important factor in increasing positive health outcomes and positive health behaviors across a variety of disease states including obesity. However, research examining the relationship between social support for exercise and weight and physical activity status, particularly among Latino men, is lacking. This paper examined whether social support for exercise predicted weight and physical activity status and whether the direction of these relationships differ as a function of Hispanic/Latino background (Puerto Rican/Mexican). Participants were 203 men who participated in a National Institutes of Health (NIH)-funded study addressing culture- and obesity-related variables. Both family participation social support and f amily rewards and punishment social support predicted higher weight status ( p < .005 and p < .05, respectively). Friend participation social support did not predict weight status. The direction of the relationship between weight status and family participation social support, family rewards and punishment social support, and friend participation social support did not significantly differ as a function of Hispanic/Latino background. The direction of the relationship between physical activity status and family participation social support, family rewards and punishment social support, and friend participation social support did not significantly differ as a function of Hispanic/Latino background. Findings suggest that increased social support for exercise from family members may be focused on those who need it most-overweight and obese participants. Additional research is needed to explore sociocultural factors that may promote social support, physical activity, and weight loss and maintenance in Puerto Rican and Mexican men.

Accuracy of different impression materials in parallel and nonparallel implants

PubMed Central

Vojdani, Mahroo; Torabi, Kianoosh; Ansarifard, Elham

2015-01-01

Background: A precise impression is mandatory to obtain passive fit in implant-supported prostheses. The aim of this study was to compare the accuracy of three impression materials in both parallel and nonparallel implant positions. Materials and Methods: In this experimental study, two partial dentate maxillary acrylic models with four implant analogues in canines and lateral incisors areas were used. One model was simulating the parallel condition and the other nonparallel one, in which implants were tilted 30° bucally and 20° in either mesial or distal directions. Thirty stone casts were made from each model using polyether (Impregum), additional silicone (Monopren) and vinyl siloxanether (Identium), with open tray technique. The distortion values in three-dimensions (X, Y and Z-axis) were measured by coordinate measuring machine. Two-way analysis of variance (ANOVA), one-way ANOVA and Tukey tests were used for data analysis (α = 0.05). Results: Under parallel condition, all the materials showed comparable, accurate casts (P = 0.74). In the presence of angulated implants, while Monopren showed more accurate results compared to Impregum (P = 0.01), Identium yielded almost similar results to those produced by Impregum (P = 0.27) and Monopren (P = 0.26). Conclusion: Within the limitations of this study, in parallel conditions, the type of impression material cannot affect the accuracy of the implant impressions; however, in nonparallel conditions, polyvinyl siloxane is shown to be a better choice, followed by vinyl siloxanether and polyether respectively. PMID:26288620

WE-D-18A-05: Construction of Realistic Liver Phantoms From Patient Images and a Commercial 3D Printer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leng, S; Vrieze, T; Kuhlmann, J

2014-06-15

Purpose: To assess image quality and radiation dose reduction in abdominal CT imaging, physical phantoms having realistic background textures and lesions are highly desirable. The purpose of this work was to construct a liver phantom with realistic background and lesions using patient CT images and a 3D printer. Methods: Patient CT images containing liver lesions were segmented into liver tissue, contrast-enhanced vessels, and liver lesions using commercial software (Mimics, Materialise, Belgium). Stereolithography (STL) files of each segmented object were created and imported to a 3D printer (Object350 Connex, Stratasys, MN). After test scans were performed to map the eight availablemore » printing materials into CT numbers, printing materials were assigned to each object and a physical liver phantom printed. The printed phantom was scanned on a clinical CT scanner and resulting images were compared with the original patient CT images. Results: The eight available materials used to print the liver phantom had CT number ranging from 62 to 117 HU. In scans of the liver phantom, the liver lesions and veins represented in the STL files were all visible. Although the absolute value of the CT number in the background liver material (approx. 85 HU) was higher than in patients (approx. 40 HU), the difference in CT numbers between lesions and background were representative of the low contrast values needed for optimization tasks. Future work will investigate materials with contrast sufficient to emulate contrast-enhanced arteries. Conclusion: Realistic liver phantoms can be constructed from patient CT images using a commercial 3D printer. This technique may provide phantoms able to determine the effect of radiation dose reduction and noise reduction techniques on the ability to detect subtle liver lesions in the context of realistic background textures.« less

Supporting hemodialysis patients: A phenomenological study

PubMed Central

Shahgholian, Nahid; Yousefi, Hojatollah

2015-01-01

Background: Chronic renal disease and hemodialysis cause numerous psychological, social, cultural, and spiritual challenges for both patients and their families. Overcoming these challenges is possible only through providing holistic support for the patients. Today, despite the support provided by family and professional caregivers for the patients, patients still express dissatisfaction with the support provided and believe it to be inadequate. In fact, patients and family caregivers and healthcare practitioners seem to have different understandings of the notion of support. Thus, the researcher decided to examine the concept of support from the viewpoint of hemodialysis patients. Materials and Methods: This descriptive phenomenological research was conducted on 17 patients with end-stage renal disease (ESRD) who were undergoing hemodialysis. Purposive sampling was performed and continued until data saturation. Data were collected through 30–60 min unstructured interviews and analyzed using Colaizzi's method. Results: From the analysis of data, 4 themes (psychological support, accompaniment, social support, and spiritual support) and 11 sub-themes were obtained. Psychological support consisted of two sub-themes of psychological support by healthcare practitioners and emotional support by family and relatives. Accompaniment included three sub-themes of assistance in transportation, providing and using medicine, and daily activities. Social support was identified with four sub-themes of promotion of the society's understanding of the patients’ condition, improvement of communication with others, the need for employment, and independence. Spiritual support was identified with two sub-themes of the need for faith and trust in God or Imams and the need to resolve spiritual contradictions. Conclusion: The results showed that from the viewpoint of the participants, the concept of support consisted of psychological support, social support, accompanying the patient, and spiritual support. Hence, it can be concluded that this concept should be considered in healthcare planning, in order to improve the health and quality of life of these patients and their adaptation to the disease and its treatment process. PMID:26457103

An approach for maximizing the smallest eigenfrequency of structure vibration based on piecewise constant level set method

NASA Astrophysics Data System (ADS)

Zhang, Zhengfang; Chen, Weifeng

2018-05-01

Maximization of the smallest eigenfrequency of the linearized elasticity system with area constraint is investigated. The elasticity system is extended into a large background domain, but the void is vacuum and not filled with ersatz material. The piecewise constant level set (PCLS) method is applied to present two regions, the original material region and the void region. A quadratic PCLS function is proposed to represent the characteristic function. Consequently, the functional derivative of the smallest eigenfrequency with respect to PCLS function takes nonzero value in the original material region and zero in the void region. A penalty gradient algorithm is proposed, which initializes the whole background domain with the original material and decreases the area of original material region till the area constraint is satisfied. 2D and 3D numerical examples are presented, illustrating the validity of the proposed algorithm.

Association between suicidal ideation and behavior, and depression, anxiety, and perceived social support in cancer patients

PubMed Central

Şengül, Melike Ceyhan Balcı; Kaya, Vildan; Şen, Cenk Ahmet; Kaya, Kemal

2014-01-01

Background The aim of this study was to determine the relationship between suicidal behavior and associated factors such as depression, anxiety, and perceived social support level in cancer patients. Material/Methods The study group included 102 patients who were under treatment in the oncology department and the control group included 100 individuals with similar sociodemographic features. A sociodemographic information form, Beck depression inventory, Beck anxiety inventory, suicidal behavior inventory, suicidal ideation inventory, and multidimensional inventory of perceived social support were used. Results The mean Beck depression inventory and Beck anxiety inventory scores in the study group were significantly higher compared to the control group. Thirteen patients in the study group attempted suicide, whereas 3 individuals attempted suicide in the control group. Similarly, the mean suicide behavior and ideation scores in the study group were significantly higher compared to the control group. The mean total multidimensional inventories of perceived social support score, as well as the mean family and friend sub-inventory scores in the control group were significantly higher compared to the study group. Conclusions This study revealed that depression and anxiety occur frequently in cancer patients. Suicide attempts and ideation are higher in cancer patients compared to the control group. Social support perceived from family and friends is lower in cancer patients. Suicide attempts are correlated with depression, anxiety, low level of perceived social support, and advanced disease stage. PMID:24584172

Detection of microbial biofilms on food processing surfaces: hyperspectral fluorescence imaging study

NASA Astrophysics Data System (ADS)

Jun, Won; Kim, Moon S.; Chao, Kaunglin; Lefcourt, Alan M.; Roberts, Michael S.; McNaughton, James L.

2009-05-01

We used a portable hyperspectral fluorescence imaging system to evaluate biofilm formations on four types of food processing surface materials including stainless steel, polypropylene used for cutting boards, and household counter top materials such as formica and granite. The objective of this investigation was to determine a minimal number of spectral bands suitable to differentiate microbial biofilm formation from the four background materials typically used during food processing. Ultimately, the resultant spectral information will be used in development of handheld portable imaging devices that can be used as visual aid tools for sanitation and safety inspection (microbial contamination) of the food processing surfaces. Pathogenic E. coli O157:H7 and Salmonella cells were grown in low strength M9 minimal medium on various surfaces at 22 +/- 2 °C for 2 days for biofilm formation. Biofilm autofluorescence under UV excitation (320 to 400 nm) obtained by hyperspectral fluorescence imaging system showed broad emissions in the blue-green regions of the spectrum with emission maxima at approximately 480 nm for both E. coli O157:H7 and Salmonella biofilms. Fluorescence images at 480 nm revealed that for background materials with near-uniform fluorescence responses such as stainless steel and formica cutting board, regardless of the background intensity, biofilm formation can be distinguished. This suggested that a broad spectral band in the blue-green regions can be used for handheld imaging devices for sanitation inspection of stainless, cutting board, and formica surfaces. The non-uniform fluorescence responses of granite make distinctions between biofilm and background difficult. To further investigate potential detection of the biofilm formations on granite surfaces with multispectral approaches, principal component analysis (PCA) was performed using the hyperspectral fluorescence image data. The resultant PCA score images revealed distinct contrast between biofilms and granite surfaces. This investigation demonstrated that biofilm formations on food processing surfaces, even for background materials with heterogeneous fluorescence responses, can be detected. Furthermore, a multispectral approach in developing handheld inspection devices may be needed to inspect surface materials that exhibit non-uniform fluorescence.

Background Characterization Techniques For Pattern Recognition Applications

NASA Astrophysics Data System (ADS)

Noah, Meg A.; Noah, Paul V.; Schroeder, John W.; Kessler, Bernard V.; Chernick, Julian A.

1989-08-01

The Department of Defense has a requirement to investigate technologies for the detection of air and ground vehicles in a clutter environment. The use of autonomous systems using infrared, visible, and millimeter wave detectors has the potential to meet DOD's needs. In general, however, the hard-ware technology (large detector arrays with high sensitivity) has outpaced the development of processing techniques and software. In a complex background scene the "problem" is as much one of clutter rejection as it is target detection. The work described in this paper has investigated a new, and innovative, methodology for background clutter characterization, target detection and target identification. The approach uses multivariate statistical analysis to evaluate a set of image metrics applied to infrared cloud imagery and terrain clutter scenes. The techniques are applied to two distinct problems: the characterization of atmospheric water vapor cloud scenes for the Navy's Infrared Search and Track (IRST) applications to support the Infrared Modeling Measurement and Analysis Program (IRAMMP); and the detection of ground vehicles for the Army's Autonomous Homing Munitions (AHM) problems. This work was sponsored under two separate Small Business Innovative Research (SBIR) programs by the Naval Surface Warfare Center (NSWC), White Oak MD, and the Army Material Systems Analysis Activity at Aberdeen Proving Ground MD. The software described in this paper will be available from the respective contract technical representatives.

Mid infrared emission spectroscopy of carbon plasma.

PubMed

Nemes, Laszlo; Brown, Ei Ei; S-C Yang, Clayton; Hommerich, Uwe

2017-01-05

Mid infrared time-resolved emission spectra were recorded from laser-induced carbon plasma. These spectra constitute the first study of carbon materials LIB spectroscopy in the mid infrared range. The carbon plasma was induced using a Q-switched Nd: YAG laser. The laser beam was focused to high purity graphite pellets mounted on a translation stage. Mid infrared emission from the plasma in an atmospheric pressure background gas was detected by a cooled HgCdTe detector in the range 4.4-11.6μm, using long-pass filters. LIB spectra were taken in argon, helium and also in air. Despite a gate delay of 10μs was used there were strong backgrounds in the spectra. Superimposed on this background broad and noisy emission bands were observed, the form and position of which depended somewhat on the ambient gas. The spectra were digitally smoothed and background corrected. In argon, for instance, strong bands were observed around 4.8, 6.0 and 7.5μm. Using atomic spectral data by NIST it could be concluded that carbon, argon, helium and nitrogen lines from neutral and ionized atoms are very weak in this spectral region. The width of the infrared bands supports molecular origin. The infrared emission bands were thus compared to vibrational features of carbon molecules (excluding C2) of various sizes on the basis of previous carbon cluster infrared absorption and emission spectroscopic analyses in the literature and quantum chemical calculations. Some general considerations are given about the present results. Copyright © 2016 Elsevier B.V. All rights reserved.

Removal of Multiple Contaminants: Biological Treatment

EPA Science Inventory

This presentation contains (1) background material on nitrate, perchlorate and ammonia contamination in the continental US; (2) scientific background on biological drinking water treatment; (3) results of bench-scale anaerobic and aerobic treatment studies; (4) results of pilot-s...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ushizima, Daniela M.; Bianchi, Andrea G. C.; DeBianchi, Christina

We introduce a computational analysis workflow to access properties of solid objects using nondestructive imaging techniques that rely on X-ray imaging. The goal is to process and quantify structures from material science sample cross sections. The algorithms can differentiate the porous media (high density material) from the void (background, low density media) using a Boolean classifier, so that we can extract features, such as volume, surface area, granularity spectrum, porosity, among others. Our workflow, Quant-CT, leverages several algorithms from ImageJ, such as statistical region merging and 3D object counter. It also includes schemes for bilateral filtering that use a 3Dmore » kernel, for parallel processing of sub-stacks, and for handling over-segmentation using histogram similarities. The Quant-CT supports fast user interaction, providing the ability for the user to train the algorithm via subsamples to feed its core algorithms with automated parameterization. Quant-CT plugin is currently available for testing by personnel at the Advanced Light Source and Earth Sciences Divisions and Energy Frontier Research Center (EFRC), LBNL, as part of their research on porous materials. The goal is to understand the processes in fluid-rock systems for the geologic sequestration of CO2, and to develop technology for the safe storage of CO2 in deep subsurface rock formations. We describe our implementation, and demonstrate our plugin on porous material images. This paper targets end-users, with relevant information for developers to extend its current capabilities.« less

28 CFR 23.2 - Background.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Background. 23.2 Section 23.2 Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL INTELLIGENCE SYSTEMS OPERATING POLICIES § 23.2 Background. It is... of intelligence data necessary to support control of serious criminal activity may represent...

28 CFR 23.2 - Background.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Background. 23.2 Section 23.2 Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL INTELLIGENCE SYSTEMS OPERATING POLICIES § 23.2 Background. It is... of intelligence data necessary to support control of serious criminal activity may represent...

28 CFR 23.2 - Background.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 1 2013-07-01 2013-07-01 false Background. 23.2 Section 23.2 Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL INTELLIGENCE SYSTEMS OPERATING POLICIES § 23.2 Background. It is... of intelligence data necessary to support control of serious criminal activity may represent...

28 CFR 23.2 - Background.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Background. 23.2 Section 23.2 Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL INTELLIGENCE SYSTEMS OPERATING POLICIES § 23.2 Background. It is... of intelligence data necessary to support control of serious criminal activity may represent...

28 CFR 23.2 - Background.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Background. 23.2 Section 23.2 Judicial Administration DEPARTMENT OF JUSTICE CRIMINAL INTELLIGENCE SYSTEMS OPERATING POLICIES § 23.2 Background. It is... of intelligence data necessary to support control of serious criminal activity may represent...

MATERIALS FOR MODERNIZATION.

ERIC Educational Resources Information Center

JACKSON, R. GRAHAM

CHOICES AND ISSUES IN SELECTING MATERIALS FOR MODERNIZATION OF SCHOOL BUILDINGS ARE DISCUSSED IN THIS REPORT. BACKGROUND INFORMATION IS INTRODUCED IN TERMS OF REASONS FOR ABANDONMENT, THE CAUSES AND EFFECTS OF SCHOOL BUILDING OBSOLESCENCE, AND PROBLEMS IN THE MODERNIZATION PROCESS. INTERIOR PARTITIONS ARE DISCUSSED IN TERMS OF BUILDING MATERIALS,…

Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

ERIC Educational Resources Information Center

Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

2012-01-01

The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

How Mature-Age Students Succeed in Higher Education: Implications for Institutional Support

ERIC Educational Resources Information Center

Heagney, Margaret; Benson, Robyn

2017-01-01

This article draws on stories of success in higher education by mature-age students of diverse backgrounds to highlight some key implications for institutional support. We begin by reviewing the post-World War II background of mature-age study in Australian higher education to provide a context for presenting some major findings from a small,…

An ultra-low background PMT for liquid xenon detectors

DOE PAGES

Akerib, D. S.; Bai, X.; Bernard, E.; ...

2012-11-15

Results are presented from radioactivity screening of two models of photomultiplier tubes designed for use in current and future liquid xenon experiments. The Hamamatsu 5.6 cm diameter R8778 PMT, used in the LUX dark matter experiment, has yielded a positive detection of four common radioactive isotopes: 238U, 232Th, 40K, and 60Co. Screening of LUX materials has rendered backgrounds from other detector materials subdominant to the R8778 contribution. A prototype Hamamatsu 7.6 cm diameter R11410 MOD PMT has also been screened, with benchmark isotope counts measured at <0.4 238U / <0.3 232Th / < 8.3 40K / 2.0+-0.2 60Co mBq/PMT. This represents a large reduction, equal to a change of xmore » $$\\frac{1}{24}$$ 238U / x $$\\frac{1}{9}$$ 232Th / x $$\\frac{1}{8}$$ 40K per PMT, between R8778 and R11410 MOD, concurrent with a doubling of the photocathode surface area (4.5 cm to 6.4 cm diameter). 60Co measurements are comparable between the PMTs, but can be significantly reduced in future R11410 MOD units through further material selection. Assuming PMT activity equal to the measured 90% upper limits, Monte Carlo estimates indicate that replacement of R8778 PMTs with R11410 MOD PMTs will change LUX PMT electron recoil background contributions by a factor of x $$\\frac{1}{25}$$ after further material selection for 60Co reduction, and nuclear recoil backgrounds by a factor of \\times $$\\frac{1}{36}$$. The strong reduction in backgrounds below the measured R8778 levels makes the R11410 MOD a very competitive technology for use in large-scale liquid xenon detectors.« less

INTEGRAL/SPI γ-ray line spectroscopy. Response and background characteristics

NASA Astrophysics Data System (ADS)

Diehl, Roland; Siegert, Thomas; Greiner, Jochen; Krause, Martin; Kretschmer, Karsten; Lang, Michael; Pleintinger, Moritz; Strong, Andrew W.; Weinberger, Christoph; Zhang, Xiaoling

2018-03-01

Context. The space based γ-ray observatory INTEGRAL of the European Space Agency (ESA) includes the spectrometer instrument "SPI". This is a coded mask telescope featuring a 19-element Germanium detector array for high-resolution γ-ray spectroscopy, encapsulated in a scintillation detector assembly that provides a veto for background from charged particles. In space, cosmic rays irradiate spacecraft and instruments, which, in spite of the vetoing detectors, results in a large instrumental background from activation of those materials, and leads to deterioration of the charge collection properties of the Ge detectors. Aim. We aim to determine the measurement characteristics of our detectors and their evolution with time, that is, their spectral response and instrumental background. These incur systematic variations in the SPI signal from celestial photons, hence their determination from a broad empirical database enables a reduction of underlying systematics in data analysis. For this, we explore compromises balancing temporal and spectral resolution within statistical limitations. Our goal is to enable modelling of background applicable to spectroscopic studies of the sky, accounting separately for changes of the spectral response and of instrumental background. Methods: We use 13.5 years of INTEGRAL/SPI data, which consist of spectra for each detector and for each pointing of the satellite. Spectral fits to each such spectrum, with independent but coherent treatment of continuum and line backgrounds, provides us with details about separated background components. From the strongest background lines, we first determine how the spectral response changes with time. Applying symmetry and long-term stability tests, we eliminate degeneracies and reduce statistical fluctuations of background parameters, with the aim of providing a self-consistent description of the spectral response for each individual detector. Accounting for this, we then determine how the instrumental background components change in intensities and other characteristics, most-importantly their relative distribution among detectors. Results: Spectral resolution of Ge detectors in space degrades with time, up to 15% within half a year, consistently for all detectors, and across the SPI energy range. Semi-annual annealing operations recover these losses, yet there is a small long-term degradation. The intensity of instrumental background varies anti-correlated to solar activity, in general. There are significant differences among different lines and with respect to continuum. Background lines are found to have a characteristic, well-defined and long-term consistent intensity ratio among detectors. We use this to categorise lines in groups of similar behaviour. The dataset of spectral-response and background parameters as fitted across the INTEGRAL mission allows studies of SPI spectral response and background behaviour in a broad perspective, and efficiently supports precision modelling of instrumental background.

Top-Level Categories of Constitutively Organized Material Entities - Suggestions for a Formal Top-Level Ontology

PubMed Central

Vogt, Lars; Grobe, Peter; Quast, Björn; Bartolomaeus, Thomas

2011-01-01

Background Application oriented ontologies are important for reliably communicating and managing data in databases. Unfortunately, they often differ in the definitions they use and thus do not live up to their potential. This problem can be reduced when using a standardized and ontologically consistent template for the top-level categories from a top-level formal foundational ontology. This would support ontological consistency within application oriented ontologies and compatibility between them. The Basic Formal Ontology (BFO) is such a foundational ontology for the biomedical domain that has been developed following the single inheritance policy. It provides the top-level template within the Open Biological and Biomedical Ontologies Foundry. If it wants to live up to its expected role, its three top-level categories of material entity (i.e., ‘object’, ‘fiat object part’, ‘object aggregate’) must be exhaustive, i.e. every concrete material entity must instantiate exactly one of them. Methodology/Principal Findings By systematically evaluating all possible basic configurations of material building blocks we show that BFO's top-level categories of material entity are not exhaustive. We provide examples from biology and everyday life that demonstrate the necessity for two additional categories: ‘fiat object part aggregate’ and ‘object with fiat object part aggregate’. By distinguishing topological coherence, topological adherence, and metric proximity we furthermore provide a differentiation of clusters and groups as two distinct subcategories for each of the three categories of material entity aggregates, resulting in six additional subcategories of material entity. Conclusions/Significance We suggest extending BFO to incorporate two additional categories of material entity as well as two subcategories for each of the three categories of material entity aggregates. With these additions, BFO would exhaustively cover all top-level types of material entity that application oriented ontologies may use as templates. Our result, however, depends on the premise that all material entities are organized according to a constitutive granularity. PMID:21533043

RadMAP: The Radiological Multi-sensor Analysis Platform

NASA Astrophysics Data System (ADS)

Bandstra, Mark S.; Aucott, Timothy J.; Brubaker, Erik; Chivers, Daniel H.; Cooper, Reynold J.; Curtis, Joseph C.; Davis, John R.; Joshi, Tenzing H.; Kua, John; Meyer, Ross; Negut, Victor; Quinlan, Michael; Quiter, Brian J.; Srinivasan, Shreyas; Zakhor, Avideh; Zhang, Richard; Vetter, Kai

2016-12-01

The variability of gamma-ray and neutron background during the operation of a mobile detector system greatly limits the ability of the system to detect weak radiological and nuclear threats. The natural radiation background measured by a mobile detector system is the result of many factors, including the radioactivity of nearby materials, the geometric configuration of those materials and the system, the presence of absorbing materials, and atmospheric conditions. Background variations tend to be highly non-Poissonian, making it difficult to set robust detection thresholds using knowledge of the mean background rate alone. The Radiological Multi-sensor Analysis Platform (RadMAP) system is designed to allow the systematic study of natural radiological background variations and to serve as a development platform for emerging concepts in mobile radiation detection and imaging. To do this, RadMAP has been used to acquire extensive, systematic background measurements and correlated contextual data that can be used to test algorithms and detector modalities at low false alarm rates. By combining gamma-ray and neutron detector systems with data from contextual sensors, the system enables the fusion of data from multiple sensors into novel data products. The data are curated in a common format that allows for rapid querying across all sensors, creating detailed multi-sensor datasets that are used to study correlations between radiological and contextual data, and develop and test novel techniques in mobile detection and imaging. In this paper we will describe the instruments that comprise the RadMAP system, the effort to curate and provide access to multi-sensor data, and some initial results on the fusion of contextual and radiological data.

Carbon nanotubes/carbon fiber hybrid material: a super support material for sludge biofilms.

PubMed

Liu, Qijie; Dai, Guangze; Bao, Yanling

2017-07-16

Carbon fiber (CF) is widely used as a sludge biofilm support material for wastewater treatment. Carbon nanotubes/carbon fiber (CNTs/CF) hybrid material was prepared by ultrasonically assisted electrophoretic deposition (EPD). CF supports (CF without handling, CF oxidized by nitric acid, CNTs/CF hybrid material) were evaluated by sludge immobilization tests, bacterial cell adsorption tests and Derjaguin -Landau -Verwey -Overbeek (DLVO) theory. We found that the CNTs/CF hybrid material has a high capacity for adsorbing activated sludge, nitrifying bacterial sludge and pure strains (Escherichia coli and Staphylococcus aureus). CNTs deposited on CF surface easily wound around the curved surface of bacterial cell which resulted in capturing more bacterial cells. DLVO theory indicated the lowest total interaction energy of CNTs/CF hybrid material, which resulted in the highest bacteria cell adsorption velocity. Experiments and DLVO theory results proved that CNTs/CF hybrid material is a super support material for sludge biofilms.

A Comparison of implant impression precision: Different materials and techniques

PubMed Central

Tabesh, Mahtab; Alikhasi, Marzieh

2018-01-01

Background Precision of implant impressions is a prerequisite for long-term success of implant supported prostheses. Impression materials and impression techniques are two important factors that impression precision relies on. Material and Methods A model of edentulous maxilla containing four implants inserted by All-on-4 guide was constructed. Seventy two impressions using polyether (PE), polyvinyl siloxane (PVS), and vinyl siloxanether (VSE) materials with direct and indirect techniques were made (n=12). Coordinates of implants in casts were measured using coordinate measuring machine (CMM). Data were analyzed with ANOVA; t-test and Tukey test were used for post hoc. Results With two-way ANOVA, mean values of linear displacements of implants were significantly different among materials and techniques. One-way ANOVA and Tukey showed significant difference between PE and VSE (P=0.019), PE and PVS (P=0.002) in direct technique, and between PVS and PE (P<0.001), PVS and VSE (P<0.001) in indirect technique. One-way ANOVA and t-test showed significant difference between the two techniques in PVS groups (P<0.001) and in PE groups (P=0.02). Two-way ANOVA showed mean values of rotational displacement of implants were significantly different among materials. One-way ANOVA and Tukey test showed significant difference between PVS and PE (P=0.001) and between PVS and VSE (P=0.012) in indirect groups. Conclusions On the basis of the results, when deciding on the material to make an impression of implants, PE is recommended for direct technique while PE and VSE are recommended for indirect technique. Recommended technique for VSE is either direct or indirect; and for PE and PVS is direct. Key words:Polyvinyl siloxane, polyether, vinyl siloxanether, direct technique, indirect technique, All-on-4, coordinate measuring machine. PMID:29670733

Research Opportunities Supporting the Vision for Space Exploration from the Transformation of the Former Microgravity Materials Science Program

NASA Technical Reports Server (NTRS)

Clinton, R. G., Jr.; Szofran, Frank; Bassler, Julie A.; Schlagheck, Ronald A.; Cook, Mary Beth

2005-01-01

The Microgravity Materials Science Program established a strong research capability through partnerships between NASA and the scientific research community. With the announcement of the vision for space exploration, additional emphasis in strategic materials science areas was necessary. The President's Commission recognized that achieving its exploration objectives would require significant technical innovation, research, and development in focal areas defined as "enabling technologies." Among the 17 enabling technologies identified for initial focus were: advanced structures, advanced power and propulsion; closed-loop life support and habitability; extravehicular activity systems; autonomous systems and robotics; scientific data collection and analysis, biomedical risk mitigation; and planetary in situ resource utilization. Mission success may depend upon use of local resources to fabricate a replacement part to repair a critical system. Future propulsion systems will require materials with a wide range of mechanical, thermophysical, and thermochemical properties, many of them well beyond capabilities of today's materials systems. Materials challenges have also been identified by experts working to develop advanced life support systems. In responding to the vision for space exploration, the Microgravity Materials Science Program aggressively transformed its research portfolio and focused materials science areas of emphasis to include space radiation shielding; in situ fabrication and repair for life support systems; in situ resource utilization for life support consumables; and advanced materials for exploration, including materials science for space propulsion systems and for life support systems. The purpose of this paper is to inform the scientific community of these new research directions and opportunities to utilize their materials science expertise and capabilities to support the vision for space exploration.

Pima Cultural Background Materials for an Elementary and Secondary Education Act Title III Project.

ERIC Educational Resources Information Center

Brook, Weston L., Comp.; And Others

Produced with funds under Title III of the Elementary and Secondary Education Act, this unit on Pima cultural background and Middle American civilization was designed to help Pima students achieve a sense of identity and pride in their Indian background by (1) thinking of themselves as a people with a long history and (2) learning that their…

Implementation of Active Support in Victoria, Australia: An Exploratory Study

ERIC Educational Resources Information Center

Mansell, Jim; Beadle-Brown, Julie; Bigby, Christine

2013-01-01

Background: Active support is an effective intervention to support engagement of residents with intellectual disability in group homes. This survey explored resident characteristics of the people supported by organisations implementing active support, the provision of active support, its procedures and systems, and resident engagement in…

A review on natural background radiation

PubMed Central

Shahbazi-Gahrouei, Daryoush; Gholami, Mehrdad; Setayandeh, Samaneh

2013-01-01

The world is naturally radioactive and approximately 82% of human-absorbed radiation doses, which are out of control, arise from natural sources such as cosmic, terrestrial, and exposure from inhalation or intake radiation sources. In recent years, several international studies have been carried out, which have reported different values regarding the effect of background radiation on human health. Gamma radiation emitted from natural sources (background radiation) is largely due to primordial radionuclides, mainly 232Th and 238U series, and their decay products, as well as 40K, which exist at trace levels in the earth's crust. Their concentrations in soil, sands, and rocks depend on the local geology of each region in the world. Naturally occurring radioactive materials generally contain terrestrial-origin radionuclides, left over since the creation of the earth. In addition, the existence of some springs and quarries increases the dose rate of background radiation in some regions that are known as high level background radiation regions. The type of building materials used in houses can also affect the dose rate of background radiations. The present review article was carried out to consider all of the natural radiations, including cosmic, terrestrial, and food radiation. PMID:24223380

Effect of genetic background on the stability of sunflower fatty acid composition in different high oleic mutations.

PubMed

Alberio, Constanza; Aguirrezábal, Luis An; Izquierdo, Natalia G; Reid, Roberto; Zuil, Sebastián; Zambelli, Andrés

2018-02-01

The effect of genetic background on the stability of fatty acid composition in sunflower near isogenic lines (NILs) carrying high-oleic Pervenets (P) or high-oleic NM1 mutations was studied. The materials were field-tested in different locations and at different sowing dates to evaluate a wide range of environmental conditions. Relationships were established between the fatty acids and the minimum night temperature (MNT) and the response was characterized. A genetic background effect for the fatty acid composition was found in both groups of NILs. The NM1-NILs showed an oleic level higher than 910 g kg -1 and they were more stable across environments with a zero or low dependence on the genetic background; on the other hand, high oleic materials bearing the P mutation showed lower levels of oleic acid, with a higher variation in fatty acid composition and a highly significant dependence on the genetic background. The NM1 mutation is the best option to develop ultra-high oleic sunflower oil that is stable across environments and genetic backgrounds, making its agronomical production more efficient and predictable. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

ICP MS selection of radiopure materials for the GERDA experiment

NASA Astrophysics Data System (ADS)

di Vacri, M. L.; Nisi, S.; Cattadori, C.; Janicsko, J.; Lubashevskiy, A.; Smolnikov, A.; Walter, M.

2015-08-01

The GERDA (GERmanium Detector Array) experiment, located in the Gran Sasso Underground Laboratory (LNGS, Italy) aims to search for neutrinoless double beta (0νββ) decay of the 76Ge isotope. Both an ultra-low radioactivity background environment and active techniques to abate the residual background are required to reach the background index (of 10-3 counts/keV kg y) at the Qββ. In order to veto and suppress those events that partially deposit energy in Ge detectors, the readout of liquid argon (LAr) scintillation light (SL) has been implemented for the second GERDA experimental Phase. A double veto system has been designed and constructed using highly radiopure materials (scintillating fibers, wavelength shifters, polymeric foils, reflective foils). This work describes the study of lead, thorium and uranium ultra-trace content, performed at the LNGS Chemistry Laboratory by High Resolution Mass Spectrometry (HR ICP MS), for the selection of all materials involved in the construction of the veto system

ICP MS selection of radiopure materials for the GERDA experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di Vacri, M. L., E-mail: divacrim@lngs.infn.it; Dipartimento di Scienze Fisiche e Chimiche, University of L’Aquila, via Vetoio, 67100 L’Aquila; Nisi, S., E-mail: nisi@lngs.infn.it

2015-08-17

The GERDA (GERmanium Detector Array) experiment, located in the Gran Sasso Underground Laboratory (LNGS, Italy) aims to search for neutrinoless double beta (0νββ) decay of the {sup 76}Ge isotope. Both an ultra-low radioactivity background environment and active techniques to abate the residual background are required to reach the background index (of 10{sup −3} counts/keV kg y) at the Q{sub ββ}. In order to veto and suppress those events that partially deposit energy in Ge detectors, the readout of liquid argon (LAr) scintillation light (SL) has been implemented for the second GERDA experimental Phase. A double veto system has been designedmore » and constructed using highly radiopure materials (scintillating fibers, wavelength shifters, polymeric foils, reflective foils). This work describes the study of lead, thorium and uranium ultra-trace content, performed at the LNGS Chemistry Laboratory by High Resolution Mass Spectrometry (HR ICP MS), for the selection of all materials involved in the construction of the veto system.« less

Rare Earth Fluorescent Nanomaterials for Enhanced Development of Latent Fingerprints.

PubMed

Wang, Meng; Li, Ming; Yu, Aoyang; Wu, Jian; Mao, Chuanbin

2015-12-30

The most commonly found fingerprints at crime scenes are latent and, thus, an efficient method for detecting latent fingerprints is very important. However, traditional developing techniques have drawbacks such as low developing sensitivity, high background interference, complicated operation, and high toxicity. To tackle this challenge, we have synthesized two kinds of rare earth fluorescent nanomaterials, including the fluoresce red-emitting YVO4:Eu nanocrystals and green-emitting LaPO4:Ce,Tb nanobelts, and then used them as fluorescent labels for the development of latent fingerprints with high sensitivity, high contrast, high selectivity, high efficiency, and low background interference, on various substrates including noninfiltrating materials, semi-infiltrating materials, and infiltrating materials.

Message framing and color combination in the perception of medical information.

PubMed

Chien, Yu-Hung

2011-04-01

A 2 x 2 between-subjects design was used to examine the effects of message framing (gain vs loss) and color combination (red background with white characters vs white background with black characters) on 120 university students' perception of materials promoting the H1N1 flu vaccine and their willingness to receive the vaccine after they had read the materials. Each participant completed a 6-item questionnaire, and the results of an analysis of variance showed that participants rated vaccine information presented through loss-framed messages as having greater interest and leading to greater understanding. Loss-framed messages presented on a white background with black characters significantly increased the willingness of the participants to receive the vaccine.

A Shallow Underground Laboratory for Low-Background Radiation Measurements and Materials Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aalseth, Craig E.; Bonicalzi, Ricco; Cantaloub, Michael G.

Abstract: Pacific Northwest National Laboratory recently commissioned a new shallow underground laboratory, located at a depth of approximately 30 meters water-equivalent. This new addition to the small class of radiation measurement laboratories located at modest underground depths worldwide houses the latest generation of custom-made, high-efficiency, low-background gamma-ray spectrometers and gas proportional counters. This manuscript describes the unique capabilities present in the shallow underground laboratory; these include large-scale ultra-pure materials production and a suite of radiation detection systems. Reported data characterize the degree of background reduction achieved through a combination of underground location, graded shielding, and rejection of cosmic-ray events. Wemore » conclude by presenting measurement targets and future opportunities.« less

pH-sensitive optrode

DOEpatents

Hirschfeld, Tomas B.; Wang, Francis T.

1989-01-01

An apparatus is provided for remotely monitoring pH. A support material is provided on which organic dye molecules are covalently attached at a surface density falling within a predetermined range. The pH dependent fluorescence response of the bound organic dye molecules depends critically on surface density of the organic dye molecules bound to the support material and the nature of the covalent linkage betwen the organic dye molecules and the support material. The invention is operated by contacting the support material on which the organic dye is attached with the fluid whose pH is to be determined. When in contact, the organic dye on the support material is illuminated so that it is caused to fluoresce. The intensity of organic dye fluorescence is then related to pH.

Investigation of Deuterium Loaded Materials Subject to X-Ray Exposure

NASA Technical Reports Server (NTRS)

Benyo, Theresa L.; Steinetz, Bruce M.; Hendricks, Robert C.; Martin, Richard E.; Forsley, Lawrence P.; Daniels, Christopher C.; Chait, Arnon; Pines, Vladimir; Pines, Marianna; Penney, Nicholas;

Mapping target signatures via partial unmixing of AVIRIS data

NASA Technical Reports Server (NTRS)

Boardman, Joseph W.; Kruse, Fred A.; Green, Robert O.

1995-01-01

A complete spectral unmixing of a complicated AVIRIS scene may not always be possible or even desired. High quality data of spectrally complex areas are very high dimensional and are consequently difficult to fully unravel. Partial unmixing provides a method of solving only that fraction of the data inversion problem that directly relates to the specific goals of the investigation. Many applications of imaging spectrometry can be cast in the form of the following question: 'Are my target signatures present in the scene, and if so, how much of each target material is present in each pixel?' This is a partial unmixing problem. The number of unmixing endmembers is one greater than the number of spectrally defined target materials. The one additional endmember can be thought of as the composite of all the other scene materials, or 'everything else'. Several workers have proposed partial unmixing schemes for imaging spectrometry data, but each has significant limitations for operational application. The low probability detection methods described by Farrand and Harsanyi and the foreground-background method of Smith et al are both examples of such partial unmixing strategies. The new method presented here builds on these innovative analysis concepts, combining their different positive attributes while attempting to circumvent their limitations. This new method partially unmixes AVIRIS data, mapping apparent target abundances, in the presence of an arbitrary and unknown spectrally mixed background. It permits the target materials to be present in abundances that drive significant portions of the scene covariance. Furthermore it does not require a priori knowledge of the background material spectral signatures. The challenge is to find the proper projection of the data that hides the background variance while simultaneously maximizing the variance amongst the targets.

A qualitative approach to social support and breast-feeding decisions.

PubMed

Barona-Vilar, Carmen; Escribá-Agüir, Vincenta; Ferrero-Gandía, Raquel

2009-04-01

to explore pregnant women's perceptions and personal experiences of the influence of formal and informal social support on breast-feeding decision-making, in relation to breast-feeding initiation and duration. qualitative focus groups and interviews. four primary-care centres in Valencia, Spain. 19 primiparous women in their first trimester of pregnancy participated in focus groups and 12 primiparous and multiparous women in their third trimester of pregnancy participated in interviews. Women had different socio-demographic backgrounds and socio-economic status. women's perceptions and personal experiences of formal and informal social support of breast feeding may be linked to age and socio-cultural status. Women from higher socio-cultural backgrounds took their partner's opinion and support more into account when choosing breast feeding. They also conceded great importance to formal health support, and employed mothers wished to have more institutional support. Among women from lower socio-cultural backgrounds, friends were the closest social network and had the greatest influence on feeding decisions. They perceived some contradictions in health-promotion messages on breast feeding, and most of them preferred to leave work after birth to exclusively care for their baby. Younger women, without previous experience of breast feeding or possibility of receiving tangible support from their mothers, wanted more practical health-care support (e.g. providing skills in breast-feeding technique). breast-feeding promotion strategies should take into account women's different characteristics. Health professionals should consider offering postnatal support as a follow-up to practical support (e.g. breast-feeding workshops).

The Change4Life Convenience Store Programme to Increase Retail Access to Fresh Fruit and Vegetables: A Mixed Methods Process Evaluation

PubMed Central

Adams, Jean; Halligan, Joel; Burges Watson, Duika; Ryan, Vicky; Penn, Linda; Adamson, Ashley J.; White, Martin

2012-01-01

Background Consumption of fruit and vegetables is important for health, but is often lower than recommended and tends to be socio-economically patterned with lower consumption in more deprived groups. In 2008, the English Department of Health introduced the Change4Life convenience store programme. This aimed to increase retail access to fresh fruit and vegetables in deprived, urban areas by providing existing convenience stores with a range of support and branded point-of-sale materials and equipment. Methods We undertook a mixed-methods study of the Change4Life convenience store programme in the North East of England around two years after initial implementation. Store mapping (n = 87; 100% stores) and systematic in-store observations (n = 74; 85% stores) provided information on intervention fidelity; the variety, purchase price and quality of fresh fruit and vegetables on sale; and purchase price compared to a major supermarket. Ten qualitative interviews with a purposive sample of retailers and other professionals explored experiences of the intervention and provided further insight on quantitative results. Results Intervention stores were primarily located in socio-economically disadvantaged areas. Fidelity, in terms of presence of branded materials and equipment, was low and much was not being used as intended. Fresh fruit and vegetables on sale were of high quality and had a purchase price around 10% more than comparable products at a major supermarket. Interviewees were supportive of the health improvement aim of the intervention. Retailers were appreciative of part-funding for chill cabinets and free point-of-sale materials. The intervention suffered from: poor initial and on-going communication between the intervention delivery team and retailers; poor availability of replacement point-of-sale materials; and failure to cement intended links with health workers and community organisations. Conclusions Overall, intervention fidelity was low and the intervention is unlikely to have had a substantial or long-term effect on customers’ consumption of fruit and vegetables. PMID:22761795

Guidelines for Assessment and Abatement of Asbestos-Containing Materials in Buildings.

ERIC Educational Resources Information Center

Pielert, James H.; Mathey, Robert G.

This report presents guidelines, based on available information, for the assessment and abatement of asbestos-containing materials in buildings. Section 1 provides background information on the history and use of asbestos-containing products in buildings, the characteristics of asbestos fibers, products and materials containing asbestos, and…

Data Processing Volume I. Instructor's Guide.

ERIC Educational Resources Information Center

Vittetoe, Jerry

These instructional materials are intended as a guide for the instructor of a block course in introductory vocational data processing. A textbook and supplementary materials of the instructor's choice would probably be used in conjunction with these materials. Topics covered in the 11 units are background and uses of data processing, input/output…

Materials and Equipment: ECI-4. Early Childhood Intervention Catalog Module.

ERIC Educational Resources Information Center

Evans, Joyce; Bricker, Donna

The fourth of seven modules for professionals working with young (birth to age 3) handicapped children provides information on equipment, materials, and activities in early intervention. Background information discusses ways to catalog materials and equipment and describes teaching approaches using toys and manipulatives. A variety of teaching…

Design of structures against fire. Civil engineering/buildings, architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anchor, R.D.; Malhotra, H.L.; Purkiss, J.A.

1986-01-01

The book covers structural design criteria, along with background theory on fire protection methods for structures from a variety of materials, including timber, steel, and concrete. Research on the behavior of structural materials in the presence of fire is highlighted, and the need for fire-resistant materials is addressed.

Development and Implementation of a New HELIOS Diagnostic using a Fast Piezoelectric Valve on the Prototype Material Plasma Exposure eXperiment

NASA Astrophysics Data System (ADS)

Ray, Holly; Biewer, Theodore; Caneses, Juan; Green, Jonathan; Lindquist, Elizabeth; McQuown, Levon; Schmitz, Oliver

2017-10-01

A new helium line-ratio spectral monitoring (HELIOS) diagnostic, using a piezoelectric valve with high duty cycles (on/off times ms), allowing for good background correction, and measured particle flowrates on the order of 1020 particles/second is being implemented on Oak Ridge National Laboratory's (ORNL) Prototype Material Plasma Exposure eXperiment (Proto-MPEX). Built in collaboration with the University of Wisconsin - Madison, the HELIOS diagnostic communicates with a Labview program for controlled bursts of helium into the vessel. The open magnetic geometry of Proto-MPEX is ideal for testing and characterizing a HELIOS diagnostic. The circular cross-section with four ports allows for cross comparison between different diagnostics: 1) Helium injection with the piezoelectric puff valve, 2) HELIOS line-of-sight high-gain observation, 3) scan-able Double Langmuir probe, and 4) HELIOS 2D imaging observation. Electron density and temperature measurements from the various techniques will be compared. This work was supported by the US. D.O.E. contract DE-AC05-00OR22725 and DE-SC00013911.

Preparation and characterization of poly (hydroxy butyrate)/chitosan blend scaffolds for tissue engineering applications

PubMed Central

Karbasi, Saeed; Khorasani, Saied Nouri; Ebrahimi, Somayeh; Khalili, Shahla; Fekrat, Farnoosh; Sadeghi, Davoud

2016-01-01

Background: Poly (hydroxy butyrate) (PHB) is a biodegradable and biocompatible polymer with good mechanical properties. This polymer could be a promising material for scaffolds if some features improve. Materials and Methods: In the present work, new PHB/chitosan blend scaffolds were prepared as a three-dimensional substrate in cartilage tissue engineering. Chitosan in different weight percent was added to PHB and solved in trifluoroacetic acid. Statistical Taguchi method was employed in the design of experiments. Results: The Fourier-transform infrared spectroscopy test revealed that the crystallization of PHB in these blends is suppressed with increasing the amount of chitosan. Scanning electron microscopy images showed a thin and rough top layer with a nodular structure, supported with a porous sub-layer in the surface of the scaffolds. In vitro degradation rate of the scaffolds was higher than pure PHB scaffolds. Maximum degradation rate has been seen for the scaffold with 90% wt. NaCl and 40% wt. chitosan. Conclusions: The obtained results suggest that these newly developed PHB/chitosan blend scaffolds may serve as a three-dimensional substrate in cartilage tissue engineering. PMID:28028517

Contrast ratios and masking ability of three types of ceramic veneers.

PubMed

Chu, Frederick C S; Chow, Tak W; Chai, John

2007-11-01

Although ceramic veneers have been proven to be clinically successful in longevity studies, there is little information on the contrast ratios and masking ability of the available ceramic systems because dental laboratory technology and expensive experimental equipment are required for the investigation. Moreover, the complexity in understanding how to evaluate translucent ceramic materials may also explain why information in this area is limited. The purpose of this study was to determine the contrast ratios and masking abilities of 3 types of all-ceramic veneers by measuring their luminance and color difference over white and black backgrounds. Disk-shaped specimens (8-mm diameter x 0.7-mm thickness) of Shade A2 (Vita Lumin) of 3 types of all-ceramic systems: Procera (n=8), Empress 2 (n=8), and Vitadur Alpha (n=10) were fabricated. The luminance (as Y) and color (as CIE L*a*b*) of the specimens were measured with a colorimeter. The contrast ratio (CR=Yb/Yw), defined as the ratio of illuminance (Y) of the test material when it is placed on the black background (Yb) to the illuminance of the same material when it is placed over a white background (Yw), was determined. The masking ability of a specimen was evaluated by calculating the color difference (DeltaE) of the veneers over white and black backgrounds. Both CR and DeltaE* data were analyzed with 1-way ANOVA and the Tukey HSD test (alpha=.05). The mean contrast ratios (SD) of Procera, Empress 2, and Vitadur Alpha specimens were 0.50 (0.02), 0.46 (0.05), and 0.39 (0.02), respectively. CR values were significantly different among the 3 materials (P<.001). Procera veneers had a significantly higher CR compared to Empress 2 (P=.01) or Vitadur Alpha (P=.01), whereas the CR of Empress 2 was significantly higher than that of Vitadur Alpha (P=.046). Color difference (DeltaE*) (SD) of Procera, Empress 2, and Vitadur Alpha specimens over black and white backgrounds were 24.46 (1.03), 25.80 (1.03), and 31.08 (1.19), respectively. DeltaE* values were statistically different among the 3 materials (P<.001). Vitadur Alpha specimens had significantly higher DeltaE* when compared with Procera (P<.001) or Empress 2 (P<.001), whereas DeltaE* values between Procera and Empress 2 were not significantly different (P=.331). Vitadur Alpha had significantly lower contrast ratio and poorer masking ability compared to Procera or Empress 2. The clinical application of Vitadur Alpha as a veneer material over discolored teeth is cautioned. Although the contrast ratio of Procera was significantly higher than that of Empress 2, the masking abilities of these materials were not significantly different. The clinical application of these 2 ceramics as a veneer material may still be limited when applied over intense tooth discoloration because neither can fully mask the color of a black background.

Development of a flexible circuit board for low-background experiments

NASA Astrophysics Data System (ADS)

Poon, Alan; Barton, Paul; Dhar, Ankur; Larsen, Joern; Loach, James

2017-01-01

Future underground rare-event search experiments, such as neutrinoless double-beta decay searches, have stringent requirements for the radiopurity of materials placed near the active detector medium. Parylene is a polymer that has a high chemical purity and the vapor deposition process by which it is laid down tends to purify it further. In this talk the technique to fabricate a low-mass, flexible circuit board, with conductive traces photoligthographically patterned on a parylene substrate, is discussed. The performance of a proof-of-principle temperature sensor is presented. This work was supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, under Contract No. DE-AC02-05CH11231 and by the Shanghai Key Lab for Particle Physics and Cosmology (SKLPPC), Grant No. 15DZ2272100.

How we flipped the medical classroom.

PubMed

Sharma, Neel; Lau, C S; Doherty, Iain; Harbutt, Darren

2015-04-01

Flipping the classroom centres on the delivery of print, audio or video based material prior to a lecture or class session. The class session is then dedicated to more active learning processes with application of knowledge through problem solving or case based scenarios. The rationale behind this approach is that teachers can spend their face-to-face time supporting students in deeper learning processes. In this paper we provide a background literature review on the flipped classroom along with a three step approach to flipping the classroom comprising implementing, enacting and evaluating this form of pedagogy. Our three step approach is based on actual experience of delivering a flipped classroom at the University of Hong Kong. This initiative was evaluated with positive results. We hope our experience will be transferable to other medical institutions.

Bioactive glasses: Importance of structure and properties in bone regeneration

NASA Astrophysics Data System (ADS)

Hench, Larry L.; Roki, Niksa; Fenn, Michael B.

2014-09-01

This review provides a brief background on the applications, mechanisms and genetics involved with use of bioactive glass to stimulate regeneration of bone. The emphasis is on the role of structural changes of the bioactive glasses, in particular Bioglass, which result in controlled release of osteostimulative ions. The review also summarizes the use of Raman spectroscopy, referred to hereto forward as bio-Raman spectroscopy, to obtain rapid, real time in vitro analysis of human cells in contact with bioactive glasses, and the osteostimulative dissolution ions that lead to osteogenesis. The bio-Raman studies support the results obtained from in vivo studies of bioactive glasses, as well as extensive cell and molecular biology studies, and thus offers an innovative means for rapid screening of new bioactive materials while reducing the need for animal testing.

Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineering

NASA Astrophysics Data System (ADS)

Kainer, Karl U.

2006-02-01

Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.

Laser Ablation Surface-Enhanced Raman Spectroscopy (LA-SERS) for the Characterization of Organic Colorants in Cultural Heritage

NASA Astrophysics Data System (ADS)

Londero, Pablo

The characterization of artistic practice throughout history often requires measurements of material composition with microscopic resolution, either due to the fine detail of the material composition or to the amount of sample available. This problem is exacerbated for the detection of organic colorants, which are often embedded in a complex matrix (e.g. oil, natural fibers) and in low concentration due to their high tinting strength. Surface-Enhanced Raman Spectroscopy (SERS) is increasingly used in detection of organic colorants in cultural heritage due to its high sensitivity and inherent preferential sensitivity to small organic molecules. This talk will discuss recent results from a new SERS measurement technique, in which laser ablation is used as a micro-sampling method onto a SERS-active film to characterize art samples with microscopic precision and sensitivity comparable to many mass spectrometry measurements. Furthermore, the nature of the sampling method provides built-in benefits to other SERS-based techniques, such as more quantitative characterization of mixtures, improved sensitivity to some analytes, and reduced background interference. Examples will be shown for measurements of reference materials and art objects, including a restored 16th-century dish and a Renaissance fresco, The Incredulity of San Thomas, by Luca Signorelli. Supported by the National Science Foundation (NSF-CHE-1402750).

The relative efficacy of pamphlets, CD-ROM, and the Internet for disseminating adolescent drug abuse prevention programs: an exploratory study⋆

PubMed Central

Di Noia, Jennifer; Schwinn, Traci M.; Dastur, Zubin A.; Schinke, Steven P.

2010-01-01

Background Despite the availability of an increasing array of empirically validated adolescent drug abuse prevention programs, program materials and evaluation findings are poorly disseminated. CD-ROM and the Internet hold promise for disseminating this information to schools and agencies that directly serve youth, and to policy-making bodies that exercise control over funds to support adolescent drug abuse prevention programming. However, data on the relative efficacy of these newer technologies over conventional print means of dissemination are lacking. Methods Recruited through schools, community agencies, and policy-making bodies, 188 professionals were randomized to receive prevention program materials via pamphlets (55 participants), CD-ROM (64 participants), and the Internet (69 participants). Participants completed pretest, posttest, and 6-month follow-up measures that assessed their access to prevention program materials; self-efficacy for identifying, obtaining, and recommending these programs; and their likelihood of requesting, implementing, and recommending prevention programs to their constituents. Results Participants exposed to dissemination via CD-ROM and the Internet evidenced the greatest short- and long-term gains on accessibility, self-efficacy, and behavioral intention variables. Conclusions CD-ROM and the Internet are viable means for disseminating adolescent drug abuse prevention programs to schools, community agencies, and policy-making bodies, and should be increasingly used for dissemination purposes. PMID:14636798

International Disability Educational Alliance (IDEAnet)

DTIC Science & Technology

2011-03-23

scientists who have graduated from the Field Epidemiology Training Program (FELTP) GUI: Graphical User Interface GIS : Global Implementation Solutions...how to participate in IDEAnet programs, and background information. 47 “Materials for Download ” is used here to denote materials that will be provided...for download and use by interested parties. The materials may include: written/pictorial instructions, articles, videos, images, and other materials

Ethnic Heritage in America, Teacher's Manual: Curriculum Materials in Elementary School Social Studies on Greeks, Jews, Lithuanians, and Ukrainians.

ERIC Educational Resources Information Center

Chicago Consortium for Inter-Ethnic Curriculum Development, IL.

The teacher's manual accompanies the Ethnic Heritage in America curriculum materials for elementary-level social studies. First, the manual presents a background discussion of the materials. The materials resulted from an ethnic education project based on a course for teachers on Community Policies in Ethnic Education at the University of Illinois…

Clinical Decision Support Tools for Osteoporosis Disease Management: A Systematic Review of Randomized Controlled Trials

PubMed Central

Straus, Sharon E.

2008-01-01

BACKGROUND Studies indicate a gap between evidence and clinical practice in osteoporosis management. Tools that facilitate clinical decision making at the point of care are promising strategies for closing these practice gaps. OBJECTIVE To systematically review the literature to identify and describe the effectiveness of tools that support clinical decision making in osteoporosis disease management. DATA SOURCES Medline, EMBASE, CINAHL, and EBM Reviews (CDSR, DARE, CCTR, and ACP J Club), and contact with experts in the field. REVIEW METHODS Randomized controlled trials (RCTs) in any language from 1966 to July 2006 investigating disease management interventions in patients at risk for osteoporosis. Outcomes included fractures and bone mineral density (BMD) testing. Two investigators independently assessed articles for relevance and study quality, and extracted data using standardized forms. RESULTS Of 1,246 citations that were screened for relevance, 13 RCTs met the inclusion criteria. Reported study quality was generally poor. Meta-analysis was not done because of methodological and clinical heterogeneity; 77% of studies included a reminder or education as a component of their intervention. Three studies of reminders plus education targeted to physicians and patients showed increased BMD testing (RR range 1.43 to 8.67) and osteoporosis medication use (RR range 1.60 to 8.67). A physician reminder plus a patient risk assessment strategy found reduced fractures [RR 0.58, 95% confidence interval (CI) 0.37 to 0.90] and increased osteoporosis therapy (RR 2.44, CI 1.43 to 4.17). CONCLUSION Multi-component tools that are targeted to physicians and patients may be effective for supporting clinical decision making in osteoporosis disease management. Electronic supplementary material The online version of this article (doi:10.1007/s11606-008-0812-9) contains supplementary material, which is available to authorized users. PMID:18836782

Effectiveness of an online SUpport PRogramme (SUPR) for older hearing aid users: study protocol for a cluster randomised controlled trial

PubMed Central

Meijerink, Janine FJ; Pronk, Marieke; Paulissen, Bernadette; Witte, Birgit I; van der Wouden, Bregje; Jansen, Vera; Kramer, Sophia E

2017-01-01

Background An educational SUpport PRogramme called SUPR has been developed for hearing aid users (HAUs) and their communication partners (CPs) offering care beyond hearing aid fitting. SUPR teaches its users communication strategies, hearing aid handling skills and personal adjustment to hearing impairment. Methods/design Using a cluster randomised controlled trial design, 70 Dutch hearing aid dispenser practices were randomised into hearing aid fitting (care as usual, 34 practices) and hearing aid fitting including SUPR (36 practices). The aim was to recruit a total of 569 older (aged 50+ years) first-time (n=258) and experienced (n=311) HAUs and their CPs. SUPR consists of a Practical Support Booklet and online material offered via email over a period of 6–7 months. The booklet provides practical information on hearing aids, advice on communication strategies and home exercises. The online material consists of educational videos on hearing aid functionality and usage, communication strategies and peer testimonials. Finally, noncommittal email contact with the dispenser is offered. Every HAU is asked to assign a CP who is advised to be involved intensively. Effect measurements for HAUs and their CPs will occur at baseline and at 6, 12 and 18 months follow-up via online questionnaires. The primary outcomes for HAUs will be the use of communication strategies as measured by the subscales of the Communication Profile for the Hearing Impaired. A process evaluation will be performed. Ethics and dissemination The study was approved by the Dutch Institutional Review Board of the VU Medical University Center Amsterdam. This intervention could contribute to lowering the hearing impairment burden in our ageing society. The results will be disseminated through peer-reviewed publications and scientific conferences. Trial registration number ISRCTN77340339; Pre-results. PMID:28634259

Modeling estimates of the effect of acid rain on background radiation dose.

PubMed Central

Sheppard, S C; Sheppard, M I

1988-01-01

Acid rain causes accelerated mobilization of many materials in soils. Natural and anthropogenic radionuclides, especially 226Ra and 137Cs, are among these materials. Okamoto is apparently the only researcher to date who has attempted to quantify the effect of acid rain on the "background" radiation dose to man. He estimated an increase in dose by a factor of 1.3 following a decrease in soil pH of 1 unit. We reviewed literature that described the effects of changes in pH on mobility and plant uptake of Ra and Cs. Generally, a decrease in soil pH by 1 unit will increase mobility and plant uptake by factors of 2 to 7. Thus, Okamoto's dose estimate may be too low. We applied several simulation models to confirm Okamoto's ideas, with most emphasis on an atmospherically driven soil model that predicts water and nuclide flow through a soil profile. We modeled a typical, acid-rain sensitive soil using meteorological data from Geraldton, Ontario. The results, within the range of effects on the soil expected from acidification, showed essentially direct proportionality between the mobility of the nuclides and dose. This supports some of the assumptions invoked by Okamoto. We conclude that a decrease in pH of 1 unit may increase the mobility of Ra and Cs by a factor of 2 or more. Our models predict that this will lead to similar increases in plant uptake and radiological dose to man. Although health effects following such a small increase in dose have not been statistically demonstrated, any increase in dose is probably undesirable. PMID:3203639

Device for hydrogen separation and method

DOEpatents

Paglieri, Stephen N [White Rock, NM; Anderson, Iver E [Ames, IA; Terpstra, Robert L [Ames, IA

2009-11-03

A device for hydrogen separation has a porous support and hydrogen separation material on the support. The support is prepared by heat treatment of metal microparticles, preferably of iron-based or nickel-based alloys that also include aluminum and/or yttrium. The hydrogen separation material is then deposited on the support. Preferred hydrogen separation materials include metals such as palladium, alloys, platinum, refractory metals, and alloys.

VIEW LOOKING NORTH ALONG COOMBE AVENUE. NOTE FLAGSTONE PAVING MATERIAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING NORTH ALONG COOMBE AVENUE. NOTE FLAGSTONE PAVING MATERIAL FOR FORMER CEREMONIAL ENTRANCE AND MATURE SOUTHERN MAGNOLIA TREE IN BACKGROUND. - Congressional Cemetery, 1801 E Street, Southeast, Washington, District of Columbia, DC

Defeating camouflage and finding explosives through spectral matched filtering of hyperspectral imagery

NASA Astrophysics Data System (ADS)

Dombrowski, Mark S.; Willson, Paul D.; LaBaw, Clayton C.

1997-01-01

In order to achieve their goal of surreptitious operation within a country, terrorist organizations attempt to hide themselves from public view. In many instances such masking takes the form of simply appearing like the surrounding populace. In others, such as training facilities, standard military camouflaging techniques are used to conceal the group's equipment and activities. To effectively monitor and suppress activities of terrorist organizations, defeating the groups' attempt to hide is essential. Although finding individuals hiding within a society is extremely problematic, discovering camouflaged equipment, facilities, and personnel is readily accomplished by proper exploitation of hyperspectral imagery. Camouflage techniques attempt to make an object appear similar to its background, thereby making it difficult to find. Although making an object have similar color to its background is fairly easy, making it have the same spectral appearance is nearly impossible, unless the object is covered in the same material as the background. Even attempting to hide an object by covering it in background material will not work against a spectral imager since the act of moving the background material, e.g., foliage cuttings, changes the material's spectral characteristics. Hence, by collecting and properly exploiting spectral imagery, camouflaged objects can be readily differentiated from their background. This paper presents development of this technique, and of the MIDIS (multi-band identification and discrimination imaging spectroradiometer) instrument capable of real-time discrimination of camouflaged objects throughout a scene. Spectral matched-filtering of hyperspectral imagery also has the potential to find vehicles or structures which may be laden with explosives. Many explosives contain volatile materials, the release of which can be imaged by viewing appropriate spectral regions. Volatiles from the fuel oil in readily-produced ANFO are an example. If such volatiles were seen emanating from a vehicle or structure where they would not normally be expected, closer inspection would be warranted. Additionally, packing a vehicle with explosives often leaves trace residues on the outside of the vehicle. Spectral imaging and matched filtering can be used to identify these residues. Incorporation of spectral imaging surveillance equipment at probable terrorist targets could avert disasters such as the tragic bombing of the Murrah Federal Building in Oklahoma City. Application of MIDIS technology to explosive identification is also detailed.

Silver doped catalysts for treatment of exhaust

DOEpatents

Park, Paul Worn; Hester, Virgil Raymond; Ragle, Christie Susan; Boyer, Carrie L.

2009-06-02

A method of making an exhaust treatment element includes washcoating a substrate with a slurry that includes a catalyst support material. At least some of the catalyst support material from the slurry may be transferred to the substrate, and silver metal (Ag) is dispersed within the catalyst support material.

Mission and spacecraft support functions of the Materials Engineering Branch: A space oriented technology resource

NASA Technical Reports Server (NTRS)

Fisher, A.; Staugaitis, C. L.

1974-01-01

The capabilities of the Materials Engineering Branch (MEB) of the Goddard Space Flight Center, Greenbelt, Maryland, are surveyed. The specific functions of spacecraft materials review, materials processing and information dissemination, and laboratory support, are outlined in the Activity Report. Further detail is provided by case histories of laboratory satellite support and equipment. Project support statistics are shown, and complete listings of MEB publications, patents, and tech briefs are included. MEB staff, and their respective discipline areas and spacecraft liaison associations, are listed.

Method of removing sulfur emissions from a fluidized-bed combustion process

DOEpatents

Vogel, Gerhard John; Jonke, Albert A.; Snyder, Robert B.

1978-01-01

Alkali metal or alkaline earth metal oxides are impregnated within refractory support material such as alumina and introduced into a fluidized-bed process for the combustion of coal. Sulfur dioxide produced during combustion reacts with the metal oxide to form metal sulfates within the porous support material. The support material is removed from the process and the metal sulfate regenerated to metal oxide by chemical reduction. Suitable pore sizes are originally developed within the support material by heat-treating to accommodate both the sulfation and regeneration while still maintaining good particle strength.

Fast Synthesis of Pt Nanocrystals and Pt/Microporous La2O3 Materials Using Acoustic Levitation.

PubMed

Yu, Yinkai; Qu, Shaohua; Zang, Duyang; Wang, Liuding; Wu, Hongjing

2018-02-13

Usually, we must use an appropriate support material to keep the metal species stable and finely dispersed as supported metal nanoparticles for industry application. Therefore, the choice of support material is a key factor in determining the dispersion and particle size of the noble metal species. Here, we report the synthesis of a single-atom Pt material in the solution and supported Pt nanoclusters on microporous La 2 O 3 by a one-step acoustic levitation method without any pretreatment/modification of raw oxide. We have strongly contributed to the synthetic methodology of the surface/interfacial heterogeneous catalysts in this study, and this finding could open another door for synthesis of supported metal nanoparticles on porous materials for environmental catalysis.

pH-sensitive optrode

DOEpatents

Hirschfeld, T.B.; Wang, F.T.

1989-02-07

An apparatus is provided for remotely monitoring pH. A support material is provided on which organic dye molecules are covalently attached at a surface density falling within a predetermined range. The pH dependent fluorescence response of the bound organic dye molecules depends critically on surface density of the organic dye molecules bound to the support material and the nature of the covalent linkage between the organic dye molecules and the support material. The invention is operated by contacting the support material on which the organic dye is attached with the fluid whose pH is to be determined. When in contact, the organic dye on the support material is illuminated so that it is caused to fluoresce. The intensity of organic dye fluorescence is then related to pH. 4 figs.

Fast Synthesis of Pt Nanocrystals and Pt/Microporous La2O3 Materials Using Acoustic Levitation

NASA Astrophysics Data System (ADS)

Yu, Yinkai; Qu, Shaohua; Zang, Duyang; Wang, Liuding; Wu, Hongjing

2018-02-01

Usually, we must use an appropriate support material to keep the metal species stable and finely dispersed as supported metal nanoparticles for industry application. Therefore, the choice of support material is a key factor in determining the dispersion and particle size of the noble metal species. Here, we report the synthesis of a single-atom Pt material in the solution and supported Pt nanoclusters on microporous La2O3 by a one-step acoustic levitation method without any pretreatment/modification of raw oxide. We have strongly contributed to the synthetic methodology of the surface/interfacial heterogeneous catalysts in this study, and this finding could open another door for synthesis of supported metal nanoparticles on porous materials for environmental catalysis.

The relation between intra- and interpersonal factors and food consumption level among Iranian adolescent girls

PubMed Central

Kazemi, Ashraf; Zahraei, Nafisehsadat Nekuei; Nazarian, Naser

2016-01-01

Background: Poor nutrition habits in adolescent girls endanger their health and are followed by serious systemic diseases in adulthood and negative effects on their reproductive health. To design health promotion programs, understanding of the intra- and interpersonal associated factors with treatment is essential, and this was the aim of this study. Materials and Methods: This cross-sectional study was conducted on 193 adolescent girls of age 11-15 years. Random cluster selection was used for sample selection. Food group consumption pattern was assessed by food frequency questionnaire. Also, perceived susceptibility/severity and nutritional attitude as intrapersonal factors and social support as interpersonal factor were assessed. The relationship between food group consumption level and nutritional attitude and perceived treat (susceptibility/severity) as intrapersonal factors and perceived social support as interpersonal factor were assessed by linear multiple regression and analysis of variance (ANOVA). Results: Results showed that the level of sweetmeat food consumption was related to perceived social support (P = 0.03) and nutritional attitude (P = 0.01) negatively. In addition, an inverse and significant association was found between the level of junk food intake and informational perceived social support (P = 0.004). The association between the level of fast food intake and the perceived parental social support for preparation of healthy food was negatively significant (P = 0.03). Breakfast consumption was related to nutritional attitude (P = 0.03), social support (P = 0.03), and perceived severity (P = 0.045). Conclusions: Results revealed that perceived social support and nutritional attitude are the important and related factors in dietary intake among girls, and promotion of social support and modification of nutritional attitude may lead to healthy nutritional behaviors among them. PMID:27095987

IDENTIFYING POTENTIAL SOURCES OF BACKGROUND CONTAMINATION IN RT-PCR

EPA Science Inventory

Extraction of nucleic acids from low biomass samples, such as drinking water, is particularly sensitive to potential background contamination because the contaminating material is minimally diluted by the sample. The presence of bacterial DNA in Taq DNA polymerase is wel...

Solid Lubrication Fundamentals and Applications: Introduction and Background. Revision 1

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

1998-01-01

This chapter presents an introduction and historical background to the field of tribology, especially solid lubrication and lubricants and sets them in the perspective of techniques and materials in lubrication. Also, solid and liquid lubrication films are defined and described.

Solid Lubrication Fundamentals and Applications. Chapter 1; Introduction and Background

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

1996-01-01

This chapter presents an introduction and historical background to the field of tribology, especially solid lubrication and lubricants and sets them in the perspective of techniques and materials in lubrication. Also, solid and liquid lubrication films are defined and described.

Pride in Oklahoma.

ERIC Educational Resources Information Center

Moore, Gordon; Blackburn, Bob L.

This booklet is intended to be used as background material by social studies and history classroom teachers as they develop and implement educational programs on Oklahoma's heritage. It includes background information on the land and people of Oklahoma (geology, climate, topography, vegetation, animals, prehistoric peoples, French explorers,…

The Effect of Arch Height and Material Hardness of Personalized Insole on Correction and Tissues of Flatfoot.

PubMed

Su, Shonglun; Mo, Zhongjun; Guo, Junchao; Fan, Yubo

2017-01-01

Flat foot is one of the common deformities in the youth population, seriously affecting the weight supporting and daily exercising. However, there is lacking of quantitative data relative to material selection and shape design of the personalized orthopedic insole. This study was to evaluate the biomechanical effects of material hardness and support height of personalized orthopedic insole on foot tissues, by in vivo experiment and finite element modeling. The correction of arch height increased with material hardness and support height. The peak plantar pressure increased with the material hardness, and these values by wearing insoles of 40° were apparently higher than the bare feet condition. Harder insole material results in higher stress in the joint and ligament stress than softer material. In the calcaneocuboid joint, the stress increased with the arch height of insoles. The material hardness did not apparently affect the stress in the ankle joints, but the support heights of insole did. In general, insole material and support design are positively affecting the correction of orthopedic insole, but negatively resulting in unreasonable stress on the stress in the joint and ligaments. There should be an integration of improving correction and reducing stress in foot tissues.

A SWOT analysis of the organization and financing of the Danish health care system.

PubMed

Christiansen, Terkel

2002-02-01

The organization and financing of the Danish health care system was evaluated within a framework of a SWOT analysis (analysis of Strengths, Weaknesses, Opportunities and Threats) by a panel of five members with a background in health economics. The present paper describes the methods and materials used for the evaluation: selection of panel members, structure of the evaluation task according to the health care triangle model, selection of background material consisting of documents and literature on the Danish health care system, and a 1-week study visit.

The Development of Man and His Culture: Old World Prehistory. Grade 5. Teacher Guide [And] Pupil Text [And] Pupil Guide [And] Teacher Background Material [And] A Sequential Curriculum in Anthropology. Test Form 5, Composite Form for Pre- and Post-Test. Revised, January 1968. Publications No. 25, 31, 23, 24 and 43.

ERIC Educational Resources Information Center

Potterfield, James E.; And Others

This social studies unit includes a teaching guide, student text, study guide, teacher background material, and composite pretest/posttest covering archaeological methods, evolution, fossils and man, and development of culture during the prehistoric periods in the Old World. It is part of the Anthropology Curriculum Project and is designed for…

Impact of Budget Cuts on Children: Background Materials for Joint Hearing of the Subcommittee on Oversight of the Committee on Ways and Means and the Subcommittee on Health and the Environment of the Committee on Energy and Commerce, U.S. House of Representatives, 97th Congress, 2nd Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Ways and Means.

Prepared for joint hearings on the impact of the proposed budget cuts on programs affecting children, these background materials describe the main programs which serve children in five general areas. These areas are health services for mothers and children, child nutrition programs, aid to families with dependent children, day care and other child…

Coherent photon scattering background in sub- GeV / c 2 direct dark matter searches

DOE PAGES

Robinson, Alan E.

2017-01-18

Here, proposed dark matter detectors with eV-scale sensitivities will detect a large background of atomic (nuclear) recoils from coherent photon scattering of MeV-scale photons. This background climbs steeply below ~10 eV, far exceeding the declining rate of low-energy Compton recoils. The upcoming generation of dark matter detectors will not be limited by this background, but further development of eV-scale and sub-eV detectors will require strategies, including the use of low nuclear mass target materials, to maximize dark matter sensitivity while minimizing the coherent photon scattering background.

Clark County Community College Students: Highlights from a Survey of their Backgrounds, Activities, Ratings of Skills, Use of Support Services, and Educational Attainments.

ERIC Educational Resources Information Center

Friedlander, Jack

This series of 15 brief reports summarizes findings for a survey of 564 Clark County Community College students which was conducted in Spring 1981 to determine: (1) student characteristics and educational background; (2) student usage of campus support services; (3) student ratings of their abilities in eight academic skill areas; (4) the extent…

[Nursing home placement of people with dementia: a secondary analysis of qualitative data and literature review on perspectives of informal caregivers and healthcare professionals].

PubMed

Nguyen, Natalie; Renom-Guiteras, Anna; Meyer, Gabriele; Stephan, Astrid

2018-06-01

Background: Nursing home placement of people with dementia can become necessary when informal care is no longer sufficient. Informal carers experience the transition period as an additional burden. Aim: Experiences and views of informal carers and healthcare professionals regarding the transition from people with dementia to a nursing home are investigated to improve the support for informal carers. Method: This secondary analysis included data from all five focus groups with n = 30 informal carers and healthcare professionals conducted as part of the “RightTimePlaceCare” project. To supplement the material which resulted from a single interview question, a literature analysis with the same focus was conducted. Results: The merged results indicated that informal carers needed professional support early on at home until after the nursing home placement. Concerns regarding nursing homes, financial aspects and family related issues were important aspects in the decision making. Healthcare professionals recommended provision of early guidance regarding those matters and making own experiences with nursing homes. Healthcare professionals should serve as mediators during the transition process and improve the collaboration between service providers. Conclusions: Empowering families to make informed choices could be facilitated by offering advice at home about their options for formal support services, financial support, and housing solutions. Healthcare professionals should support caregivers to make a decision, coordinate the placement and to cope with the new situation.

Path Analysis Associations Between Perceived Social Support, Stressful Life Events and Other Psychosocial Risk Factors During Pregnancy and Preterm Delivery

PubMed Central

Mirabzadeh, Arash; Dolatian, Mahrokh; Forouzan, Ameneh Setare; Sajjadi, Homeira; Majd, Hamid Alavi; Mahmoodi, Zohreh

2013-01-01

Background Although several socio-medical risk factors have been identified for preterm labor, there is a gap in understanding the underlying etiology of preterm labor. Objectives The current study aimed to analyze the relationship pathway of perceived social support, stressful life events, and other psychosocial risk factors during pregnancy with incidence of preterm labor. Materials and Methods In a prospective cohort study in four hospitals in Tehran, 500 pregnant women in their 24th to 28th gestational weeks were studied. They filled out a self-report questionnaire on perceived social support, depression, anxiety, stress and stressful life events. Sociodemographic characteristics were also assessed. The participants were followed up until labor, and the data about mother and the newborn were collected after labor. The data were analyzed by SPSS 16 and Lisrel 8.8 software programs using pathway analysis. Results The final path model fit well (CFI = 0.96; RMSEA = .064). The results showed that depression, anxiety, and stress (β = -0.18) directly, and stressful life events indirectly (β= -0.0396) had the most predict on gestational age at labor. Perceived social support, directly through socioeconomic status (β=0.25), and indirectly through stress, depression and anxiety (β= -0.26) affected the gestational age at birth (β= 0.0468). Conclusions The current study showed that supporting pregnant mother moderates psychological problems such as stress, anxiety, and depression, and hence reduces preterm labor. PMID:24349750

Decision support methods for the environmental assessment of contamination at mining sites.

PubMed

Jordan, Gyozo; Abdaal, Ahmed

2013-09-01

Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a 'holistic' approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.

Skin toxicities and unmet supportive care needs of patients with cancer undergoing EGFR-inhibitor therapy

PubMed

Matzka, Martin; Stöhr, Doreen; Colditz, Alexandra; Köck-Hódi, Sabine; Koller, Martina; Mayer, Hanna

2017-01-01

Background: Targeted therapies, such as the EGFR (epidermal growth factor receptor) inhibitor therapy, are being used to treat patients with various solid and metastatic tumours. Skin toxicities are a common side effect of this therapy. Aim: The aim of this study was to assess the effects of skin toxicities on quality of life of patients with cancer undergoing EGFR inhibitor therapy, as well as their unmet supportive care needs. Method: Embedded design. A standardised quantitative survey was administered and analysed. In addition, memos and audiotaped material of insightful conversations with the patients after survey administration were included in the analyses. Results: Among the three domains of the effects of skin toxicities on quality of life, physical symptoms (e. g. itching skin, rash) were most frequently reported to impair quality of life, while associated emotional and functional impairments were less frequently reported. Patients don’t consider the management of skin toxicities to be a priority during their treatment, skin toxicities are rather perceived in context of the total symptom burden. Yet, we observed significant correlations between the assessed quality of life and unmet supportive care need domains, especially concerning physical and psychological needs. Conclusions: Although no clinically significant impairment of quality of life of patients undergoing EGFR inhibitor therapy was found, skin changes should be addressed in supportive interventions embedded in routine symptom management.

General practitioners’ and primary care nurses’ care for people with disabilities: quality of communication and awareness of supportive services

PubMed Central

Storms, Hannelore; Marquet, Kristel; Claes, Neree

2017-01-01

Background General practitioners (GPs) and primary-care nurses (PCNs) often feel inexperienced or inadequately educated to address unmet needs of people with disabilities (PDs). In this research, GPs’ and PCNs’ communication with PDs and health care professionals, as well as their awareness of supportive measures relevant to PDs (sensory disabilities excluded), was examined. Materials and methods An electronic questionnaire was sent out to 545 GPs and 1,547 PCNs employed in Limburg (Belgium). GPs and PCNs self-reported about both communication with parties involved in care for PDs (scale very good, good, bad, very bad) and their level of awareness of supportive measures relevant for PDs (scale unaware, inadequately aware, adequately aware). Results Of the questionnaire recipients, 6.6% (36 of 545) of GPs and 37.6% (588 of 1,547) of PCNs participated: 68.8% of 32 GPs and 45.8% of 443 PCNs categorized themselves as communicating well with PDs, and attributed miscommunication to limited intellectual capacities of PDs. GPs and PCNs reported communicating well with other health care professionals. Inadequate awareness was reported for tools to communicate (88.3% of GPs, 89% of PCNs) and benefits for PDs (44.1% of GPs, 66.9% of PCNs). Conclusion GPs’ and PCNs’ lacking awareness of communication aids is problematic. Involvement in a multidisciplinary, expert network might bypass inadequate awareness of practical and social support measures. PMID:29033579

Audio-video decision support for patients: the documentary genré as a basis for decision aids.

PubMed

Volandes, Angelo E; Barry, Michael J; Wood, Fiona; Elwyn, Glyn

2013-09-01

Decision support tools are increasingly using audio-visual materials. However, disagreement exists about the use of audio-visual materials as they may be subjective and biased. This is a literature review of the major texts for documentary film studies to extrapolate issues of objectivity and bias from film to decision support tools. The key features of documentary films are that they attempt to portray real events and that the attempted reality is always filtered through the lens of the filmmaker. The same key features can be said of decision support tools that use audio-visual materials. Three concerns arising from documentary film studies as they apply to the use of audio-visual materials in decision support tools include whose perspective matters (stakeholder bias), how to choose among audio-visual materials (selection bias) and how to ensure objectivity (editorial bias). Decision science needs to start a debate about how audio-visual materials are to be used in decision support tools. Simply because audio-visual materials may be subjective and open to bias does not mean that we should not use them. Methods need to be found to ensure consensus around balance and editorial control, such that audio-visual materials can be used. © 2011 John Wiley & Sons Ltd.

Audio‐video decision support for patients: the documentary genré as a basis for decision aids

PubMed Central

Volandes, Angelo E.; Barry, Michael J.; Wood, Fiona; Elwyn, Glyn

2011-01-01

Abstract Objective  Decision support tools are increasingly using audio‐visual materials. However, disagreement exists about the use of audio‐visual materials as they may be subjective and biased. Methods  This is a literature review of the major texts for documentary film studies to extrapolate issues of objectivity and bias from film to decision support tools. Results  The key features of documentary films are that they attempt to portray real events and that the attempted reality is always filtered through the lens of the filmmaker. The same key features can be said of decision support tools that use audio‐visual materials. Three concerns arising from documentary film studies as they apply to the use of audio‐visual materials in decision support tools include whose perspective matters (stakeholder bias), how to choose among audio‐visual materials (selection bias) and how to ensure objectivity (editorial bias). Discussion  Decision science needs to start a debate about how audio‐visual materials are to be used in decision support tools. Simply because audio‐visual materials may be subjective and open to bias does not mean that we should not use them. Conclusion  Methods need to be found to ensure consensus around balance and editorial control, such that audio‐visual materials can be used. PMID:22032516

Synthetic Light-Curable Polymeric Materials Provide a Supportive Niche for Dental Pulp Stem Cells.

PubMed

Vining, Kyle H; Scherba, Jacob C; Bever, Alaina M; Alexander, Morgan R; Celiz, Adam D; Mooney, David J

2018-01-01

Dental disease annually affects billions of patients, and while regenerative dentistry aims to heal dental tissue after injury, existing polymeric restorative materials, or fillings, do not directly participate in the healing process in a bioinstructive manner. There is a need for restorative materials that can support native functions of dental pulp stem cells (DPSCs), which are capable of regenerating dentin. A polymer microarray formed from commercially available monomers to rapidly identify materials that support DPSC adhesion is used. Based on these findings, thiol-ene chemistry is employed to achieve rapid light-curing and minimize residual monomer of the lead materials. Several triacrylate bulk polymers support DPSC adhesion, proliferation, and differentiation in vitro, and exhibit stiffness and tensile strength similar to existing dental materials. Conversely, materials composed of a trimethacrylate monomer or bisphenol A glycidyl methacrylate, which is a monomer standard in dental materials, do not support stem cell adhesion and negatively impact matrix and signaling pathways. Furthermore, thiol-ene polymerized triacrylates are used as permanent filling materials at the dentin-pulp interface in direct contact with irreversibly injured pulp tissue. These novel triacrylate-based biomaterials have potential to enable novel regenerative dental therapies in the clinic by both restoring teeth and providing a supportive niche for DPSCs. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Investigating the Formation and Sub-Structure of Unmagnetized Collisionless Shocks

NASA Astrophysics Data System (ADS)

Endrizzi, Douglass; Egedal, J.; Forest, C.; Greess, S.; Millet-Ayala, A.; Olson, J.; Ready, A.; Waleffe, R.; Gota, H.

2017-10-01

Collisionless shocks, where the shock thickness is much smaller than the collisional mean free path, are ubiquitous astrophysical phenomena. In all shocks, the Rankine-Hugoniot jump conditions are satisfied through entropy generation at the interface; the shock propagation angle with respect to the magnetic field affects the mechanism by which this entropy is generated. Two experiments on the Big Red Ball (BRB) at UW-Madison explored the formation mechanisms of parallel and perpendicular, unmagnetized and magnetized collisionless shocks with large (1 - 3 m) system sizes. In the first experiment, a 1 m diameter theta-pinch drove a supersonic (3 < M < 4) compressive flow perpendicular to the background magnetic field. In the second, a compact toroid ([cite TriAlpha]) was fired supersonically (4 < M < 5) parallel to the background magnetic field. Triple, Langmuir, emissive, and magnetic probes were used to measure electron density, temperature, plasma potential, and fluctuations in magnetic fields. Results showing the transition from above to below MA = 1 , measurements of electron precursors, exploration of subshock structure, evidence of instabilities in the shock formation process, and future work will be presented. This material is based upon work supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE 1256259.

Updating working memory in aircraft noise and speech noise causes different fMRI activations.

PubMed

Saetrevik, Bjørn; Sörqvist, Patrik

2015-02-01

The present study used fMRI/BOLD neuroimaging to investigate how visual-verbal working memory is updated when exposed to three different background-noise conditions: speech noise, aircraft noise and silence. The number-updating task that was used can distinguish between "substitution processes," which involve adding new items to the working memory representation and suppressing old items, and "exclusion processes," which involve rejecting new items and maintaining an intact memory set. The current findings supported the findings of a previous study by showing that substitution activated the dorsolateral prefrontal cortex, the posterior medial frontal cortex and the parietal lobes, whereas exclusion activated the anterior medial frontal cortex. Moreover, the prefrontal cortex was activated more by substitution processes when exposed to background speech than when exposed to aircraft noise. These results indicate that (a) the prefrontal cortex plays a special role when task-irrelevant materials should be denied access to working memory and (b) that, when compensating for different types of noise, either different cognitive mechanisms are involved or those cognitive mechanisms that are involved are involved to different degrees. © 2014 The Authors. Scandinavian Journal of Psychology published by Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Measurement of Aluminum Content In Reflector Materials For The PICO Dark Matter Detector

NASA Astrophysics Data System (ADS)

Borsodi, Haley; PICO Collaboration

2015-04-01

The PICO collaboration uses a bubble chamber technique to search for dark matter particles. Bubbles are registered with cameras, pressure sensors and acoustic transducers. To increase the visual contrast between bubbles and liquid, retro-reflectors are used to diffuse light from LEDs evenly throughout the inner chamber. One must, however, be careful that reflector materials not contribute radioactive background. Light nuclei, such as aluminum, can absorb alpha particles from radioactive contaminants and produce high energy neutron background in the inner volume of the chamber. Since aluminum oxides are a common reflector material and since commercial compositions are trade secrets, we had to demonstrate that the amounts of aluminum in the reflectors was small enough to allow them to be used in the chambers. After acid digesting candidate material strips, they were analyzed using Microwave Plasma Atomic Emission Spectroscopy. All of the proposed materials were found to have less than 1% Aluminum content (by mass), making them safe for use by the experiment. Indiana University South Bend.

PS2-10: The CRN Cancer Communication Research Center

PubMed Central

Madrid, Sarah D; Dearing, James W; Glasgow, Russell E; Rabin, Borsika A; Mazor, Kathleen; Wagner, Edward H

2010-01-01

We propose an integrated set of three, large posters that will describe the main components of a new research center that bridges HMORN institutions. Background: The CRN Cancer Communication Research Center (CCRC) was established in September 2008 at Kaiser Colorado Institute for Health Research. Objectives: The CCRC’s objectives are to discover the most promising practice-based approaches to cancer communication and care coordination, and to disseminate those approaches. Integrated care delivery systems represent promising opportunities to study these approaches, and the CRN CCRC, with its embedded organizational focus will take advantage of the CRN as a virtual laboratory. Specific Aims: The CRN CCRC 1) leverages the existing infrastructure of the CRN to support both the discovery and dissemination of practice-based communication strategies and organizational resources; 2) supports four investigator-initiated research projects to advance communication theory and to evaluate strategies informed by theory; and 3) provides administrative, financial, and scientific support to new investigators, including clinicians, in the development of pilot projects, and assists in submission of broader, investigator-initiated proposals to be submitted for extramural funding. Methods: Two R01-scale investigator initiated research projects will advance and test communication theory. The first will: characterize patients’ and providers’ experiences communicating about errors in cancer care; investigate the health system factors that promote or inhibit effective communication; and develop, disseminate, and evaluate provider training materials and patient informational materials. The second will develop and test an intervention to decrease patient uncertainty and improve psychosocial and communicative outcomes during the period from suspicion of cancer through diagnosis and plan of care. The Center’s research projects will be augmented and supported by Shared Resource Cores. The Discovery Core will identify the most promising practicebased innovations and approaches; the Dissemination Core will focus on data harmonization and applying dissemination science to effective interventions.

Metalliferous sediments from Eolo Seamount (Tyrrhenian Sea): Hydrothermal deposition and re-deposition in a zone of oxygen depletion

USGS Publications Warehouse

Dekov, V.M.; Kamenov, George D.; Savelli, C.; Stummeyer, Jens; Thiry, M.; Shanks, Wayne C.; Willingham, A.L.; Boycheva, T.B.; Rochette, P.; Kuzmann, E.; Fortin, D.; Vertes, A.

2009-01-01

A sediment core taken from the south-east slope of the Eolo Seamount is composed of alternating red-brown and light-brown to bluish-grey layers with signs of re-deposition in the middle-upper section. The red-brown layers are Fe-rich metalliferous sediments formed as a result of low-temperature (??? 77????C) hydrothermal discharge, whereas the bluish-grey layers most probably originated from background sedimentation of Al-rich detrital material. The metalliferous layers are composed mainly of Si-rich goethite containing some Al. Co-precipitation of hydrothermally released SiO44- and Fe2+ as amorphous or poorly crystalline Fe-Si-oxyhydroxides explains the high Si concentration in goethite. The elevated Al content of the goethite is fairly unusual, but reflects the extremely high background Al content of the Tyrrhenian seawater due to the high eolian terrigenous flux from the Sahara desert. The Sr and Nd isotope data suggest that the Eolo metalliferous sediments are the product of a 3-component mixture: hydrothermal fluid, seawater, and detrital material (Saharan dust and Aeolian Arc material). The enrichment in Fe, P, As, Mo, Cd, Be, Sb, W, Y, V, depletion in REE and transition elements (Cu, Co, Ni, Zn) and the REE distribution patterns support the low-temperature hydrothermal deposition of the metalliferous layers. The hydrothermal field is located in a seawater layer of relative O2 depletion, which led to a significant fractionation of the hydrothermally emitted Fe and Mn. Fe-oxyhydroxides precipitated immediately around the vents whereas Mn stayed in solution longer and the Mn-oxides precipitated higher up on the seamount slope in seawater with relatively higher O2 levels. High seismic activity led to sediment re-deposition and slumping of the Mn-rich layers down slope and mixing with the Fe-rich layers. ?? 2009 Elsevier B.V. All rights reserved.

Report on FY15 alloy 617 code rules development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sham, Sam; Jetter, Robert I; Hollinger, Greg

2015-09-01

Due to its strength at very high temperatures, up to 950°C (1742°F), Alloy 617 is the reference construction material for structural components that operate at or near the outlet temperature of the very high temperature gas-cooled reactors. However, the current rules in the ASME Section III, Division 5 Subsection HB, Subpart B for the evaluation of strain limits and creep-fatigue damage using simplified methods based on elastic analysis have been deemed inappropriate for Alloy 617 at temperatures above 650°C (1200°F) (Corum and Brass, Proceedings of ASME 1991 Pressure Vessels and Piping Conference, PVP-Vol. 215, p.147, ASME, NY, 1991). The rationalemore » for this exclusion is that at higher temperatures it is not feasible to decouple plasticity and creep, which is the basis for the current simplified rules. This temperature, 650°C (1200°F), is well below the temperature range of interest for this material for the high temperature gas-cooled reactors and the very high temperature gas-cooled reactors. The only current alternative is, thus, a full inelastic analysis requiring sophisticated material models that have not yet been formulated and verified. To address these issues, proposed code rules have been developed which are based on the use of elastic-perfectly plastic (EPP) analysis methods applicable to very high temperatures. The proposed rules for strain limits and creep-fatigue evaluation were initially documented in the technical literature (Carter, Jetter and Sham, Proceedings of ASME 2012 Pressure Vessels and Piping Conference, papers PVP 2012 28082 and PVP 2012 28083, ASME, NY, 2012), and have been recently revised to incorporate comments and simplify their application. Background documents have been developed for these two code cases to support the ASME Code committee approval process. These background documents for the EPP strain limits and creep-fatigue code cases are documented in this report.« less

Vignettes: diverse library staff offering diverse bioinformatics services*

PubMed Central

Osterbur, David L.; Alpi, Kristine; Canevari, Catharine; Corley, Pamela M.; Devare, Medha; Gaedeke, Nicola; Jacobs, Donna K.; Kirlew, Peter; Ohles, Janet A.; Vaughan, K.T.L.; Wang, Lili; Wu, Yongchun; Geer, Renata C.

2006-01-01

Objectives: The paper gives examples of the bioinformatics services provided in a variety of different libraries by librarians with a broad range of educational background and training. Methods: Two investigators sent an email inquiry to attendees of the “National Center for Biotechnology Information's (NCBI) Introduction to Molecular Biology Information Resources” or “NCBI Advanced Workshop for Bioinformatics Information Specialists (NAWBIS)” courses. The thirty-five-item questionnaire addressed areas such as educational background, library setting, types and numbers of users served, and bioinformatics training and support services provided. Answers were compiled into program vignettes. Discussion: The bioinformatics support services addressed in the paper are based in libraries with academic and clinical settings. Services have been established through different means: in collaboration with biology faculty as part of formal courses, through teaching workshops in the library, through one-on-one consultations, and by other methods. Librarians with backgrounds from art history to doctoral degrees in genetics have worked to establish these programs. Conclusion: Successful bioinformatics support programs can be established in libraries in a variety of different settings and by staff with a variety of different backgrounds and approaches. PMID:16888664

Readability and Content of Patient Education Material Related to Implantable Cardioverter Defibrillators

PubMed Central

Strachan, Patricia H.; de Laat, Sonya; Carroll, Sandra L.; Schwartz, Lisa; Vaandering, Katie; Toor, Gurjit K.; Arthur, Heather M.

2012-01-01

Background Implantable cardioverter defibrillators (ICDs) are increasingly offered to patients for primary prevention of sudden cardiac death. Candidates for ICD receive ICD-related patient education material when they make decisions to consent or decline a primary prevention ICD. Printed patient education material directed at ICD candidates has not been the focus of direct appraisal. Objective We evaluated the readability and content of ICD-related print education materials made available to patients who were enrolled in a study involving patient decision making for ICD from 3 ICD sites in southern Ontario, Canada. Methods All ICD print materials referred to during interviews and/or that were available in ICD site waiting rooms were collected for analysis. Readability testing was conducted using the SMOG (“simple measurement of gobbledygook”) and Fry methods. The material was evaluated according to selected plain-language criteria, thematic content analysis, and rhetoric analysis. Results Twenty-one print materials were identified and analyzed. Documents were authored by device manufacturers, tertiary care hospitals, and cardiac support organizations. Although many documents adhered to plain-language recommendations, text-reading levels were higher than recommended. Twelve major content themes were identified. Content focused heavily on the positive aspects of living with the device to the exclusion of other possible information that could be relevant to the decisions that patients made. Conclusions Print-based patient education materials for ICD candidates are geared to a highly literate population. The focus on positive information to the exclusion of potentially negative aspects of the ICD, or alternatives to accepting 1, could influence and/or confuse patients about the purpose and implications of this medical device. Development of print materials is indicated that includes information about possible problems and that would be relevant for the multicultural and debilitated population who may require ICDs. The findings are highly relevant for nurses who care for primary prevention ICD candidates. PMID:21926915

Supporting Teachers' Use of a Project-Based Learning Environment in Ocean Science: Web-Based Educative Curriculum Materials

ERIC Educational Resources Information Center

Duncan, Ravit Golan; El-Moslimany, Hebbah; McDonnell, Janice; Lichtenwalner, Sage

2011-01-01

The development of inquiry and project-based materials is challenging in many ways, not the least of which is the design of supports for teachers implementing such materials. We report on the design of educative and just-in-time teacher supports for an online project-based unit in ocean science. The teacher supports were visible as tabs on the…

DNDO Report: Predicting Solar Modulation Potentials for Modeling Cosmic Background Radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behne, Patrick Alan

The modeling of the detectability of special nuclear material (SNM) at ports and border crossings requires accurate knowledge of the background radiation at those locations. Background radiation originates from two main sources, cosmic and terrestrial. Cosmic background is produced by high-energy galactic cosmic rays (GCR) entering the atmosphere and inducing a cascade of particles that eventually impact the earth’s surface. The solar modulation potential represents one of the primary inputs to modeling cosmic background radiation. Usosokin et al. formally define solar modulation potential as “the mean energy loss [per unit charge] of a cosmic ray particle inside the heliosphere…” Modulationmore » potential, a function of elevation, location, and time, shares an inverse relationship with cosmic background radiation. As a result, radiation detector thresholds require adjustment to account for differing background levels, caused partly by differing solar modulations. Failure to do so can result in higher rates of false positives and failed detection of SNM for low and high levels of solar modulation potential, respectively. This study focuses on solar modulation’s time dependence, and seeks the best method to predict modulation for future dates using Python. To address the task of predicting future solar modulation, we utilize both non-linear least squares sinusoidal curve fitting and cubic spline interpolation. This material will be published in transactions of the ANS winter meeting of November, 2016.« less

Optical method for determining the mechanical properties of a material

DOEpatents

Maris, H.J.; Stoner, R.J.

1998-12-01

Disclosed is a method for characterizing a sample, comprising the steps of: (a) acquiring data from the sample using at least one probe beam wavelength to measure, for times less than a few nanoseconds, a change in the reflectivity of the sample induced by a pump beam; (b) analyzing the data to determine at least one material property by comparing a background signal component of the data with data obtained for a similar delay time range from one or more samples prepared under conditions known to give rise to certain physical and chemical material properties; and (c) analyzing a component of the measured time dependent reflectivity caused by ultrasonic waves generated by the pump beam using the at least one determined material property. The first step of analyzing may include a step of interpolating between reference samples to obtain an intermediate set of material properties. The material properties may include sound velocity, density, and optical constants. In one embodiment, only a correlation is made with the background signal, and at least one of the structural phase, grain orientation, and stoichiometry is determined. 14 figs.

Optical method for determining the mechanical properties of a material

DOEpatents

Maris, Humphrey J.; Stoner, Robert J.

1998-01-01

Disclosed is a method for characterizing a sample, comprising the steps of: (a) acquiring data from the sample using at least one probe beam wavelength to measure, for times less than a few nanoseconds, a change in the reflectivity of the sample induced by a pump beam; (b) analyzing the data to determine at least one material property by comparing a background signal component of the data with data obtained for a similar delay time range from one or more samples prepared under conditions known to give rise to certain physical and chemical material properties; and (c) analyzing a component of the measured time dependent reflectivity caused by ultrasonic waves generated by the pump beam using the at least one determined material property. The first step of analyzing may include a step of interpolating between reference samples to obtain an intermediate set of material properties. The material properties may include sound velocity, density, and optical constants. In one embodiment, only a correlation is made with the background signal, and at least one of the structural phase, grain orientation, and stoichiometry is determined.

Designing assisted living technologies ‘in the wild’: preliminary experiences with cultural probe methodology

PubMed Central

2012-01-01

Background There is growing interest in assisted living technologies to support independence at home. Such technologies should ideally be designed ‘in the wild’ i.e. taking account of how real people live in real homes and communities. The ATHENE (Assistive Technologies for Healthy Living in Elders: Needs Assessment by Ethnography) project seeks to illuminate the living needs of older people and facilitate the co-production with older people of technologies and services. This paper describes the development of a cultural probe tool produced as part of the ATHENE project and how it was used to support home visit interviews with elders with a range of ethnic and social backgrounds, family circumstances, health conditions and assisted living needs. Method Thirty one people aged 60 to 98 were visited in their homes on three occasions. Following an initial interview, participants were given a set of cultural probe materials, including a digital camera and the ‘Home and Life Scrapbook’ to complete in their own time for one week. Activities within the Home and Life Scrapbook included maps (indicating their relationships to people, places and objects), lists (e.g. likes, dislikes, things they were concerned about, things they were comfortable with), wishes (things they wanted to change or improve), body outline (indicating symptoms or impairments), home plan (room layouts of their homes to indicate spaces and objects used) and a diary. After one week, the researcher and participant reviewed any digital photos taken and the content of the Home and Life Scrapbook as part of the home visit interview. Findings The cultural probe facilitated collection of visual, narrative and material data by older people, and appeared to generate high levels of engagement from some participants. However, others used the probe minimally or not at all for various reasons including limited literacy, physical problems (e.g. holding a pen), lack of time or energy, limited emotional or psychological resources, life events, and acute illness. Discussions between researchers and participants about the materials collected (and sometimes about what had prevented them completing the tasks) helped elicit further information relevant to assisted living technology design. The probe materials were particularly helpful when having conversations with non-English speaking participants through an interpreter. Conclusions Cultural probe methods can help build a rich picture of the lives and experiences of older people to facilitate the co-production of assisted living technologies. But their application may be constrained by the participant’s physical, mental and emotional capacity. They are most effective when used as a tool to facilitate communication and development of a deeper understanding of older people’s needs. PMID:23256612

Oxygen electrodes for rechargeable alkaline fuel cells

NASA Technical Reports Server (NTRS)

Swette, Larry; Giner, Jose

1987-01-01

Electrocatalysts and supports for the positive electrode of moderate temperature single unit rechargeable alkaline fuel cells were investigated and developed. The electrocatalysts are defined as the material with a higher activity for the oxygen electrode reaction than the support. Advanced development will require that the materials be prepared in high surface area forms, and may also entail integration of various candidate materials. Eight candidate support materials and seven electrocatalysts were investigated. Of the 8 support, 3 materials meet the preliminary requirements in terms of electrical conductivity and stability. Emphasis is now on preparing in high surface area form and testing under more severe corrosion stress conditions. Of the 7 electrocatalysts prepared and evaluated, at least 5 materials remain as potential candidates. The major emphasis remains on preparation, physical characterization and electrochemical performance testing.

Electronically conducting hybrid material as high performance catalyst support for electrocatalytic application

NASA Astrophysics Data System (ADS)

Rajesh, B.; Ravindranathan Thampi, K.; Bonard, J.-M.; Mathieu, H. J.; Xanthopoulos, N.; Viswanathan, B.

The electronically conducting hybrid material based on transition metal oxide and conducting polymer has been used as the catalyst support for Pt nanoparticles. The Pt nanoparticles loaded hybrid organic (polyaniline)-inorganic (vanadium pentoxide) composite has been used as the electrode material for methanol oxidation, a reaction of importance for the development of direct methanol fuel cells (DMFC). The hybrid material exhibited excellent electrochemical and thermal stability in comparison to the physical mixture of conducting polymer and transition metal oxide. The Pt nanoparticles loaded hybrid material exhibited high electrocatalytic activity and stability for methanol oxidation in comparison to the Pt supported on the Vulcan XC 72R carbon support. The higher activity and stability is attributed to the better CO tolerance of the composite material.

[Predictors of remission from major depressive disorder in secondary care].

PubMed

Salvo, Lilian; Saldivia, Sandra; Parra, Carlos; Cifuentes, Manuel; Bustos, Claudio; Acevedo, Paola; Díaz, Marcela; Ormazabal, Mitza; Guerra, Ivonne; Navarrete, Nicol; Bravo, Verónica; Castro, Andrea

2017-12-01

Background The knowledge of predictive factors in depression should help to deal with the disease. Aim To assess potential predictors of remission of major depressive disorders (MDD) in secondary care and to propose a predictive model. Material and Methods A 12 month follow-up study was conducted in a sample of 112 outpatients at three psychiatric care centers of Chile, with baseline and quarterly assessments. Demographic, psychosocial, clinical and treatment factors as potential predictors, were assessed. A clinical interview with the checklist of DSM-IV diagnostic criteria, the Hamilton Depression Scale and the List of Threatening Experiences and Multidimensional Scale of Perceived Social Support were applied. Results The number of stressful events, perceived social support, baseline depression scores, melancholic features, time prior to beginning treatment at the secondary level and psychotherapeutic sessions were included in the model as predictors of remission. Sex, age, number of previous depressive episodes, psychiatric comorbidity and medical comorbidity were not significantly related with remission. Conclusions This model allows to predict depression score at six months with 70% of accuracy and the score at 12 months with 72% of accuracy.

Exploring a neuroplasticity model of music therapy.

PubMed

Stegemöller, Elizabeth L

2014-01-01

Given that music therapists work across a wide range of disabilities, it is important that therapists have at least a fundamental understanding of the neurophysiology associated with the client/patient populations that they serve. Yet, there is a large gap of evidence regarding the neurophysiological changes associated with applying music as therapy. The purpose of this article is to provide music therapists with a general background in neuroplasticity principles that can be applied to the use of music therapy with multiple populations. This article will review literature on neuroplasticity and literature supporting the specific attributes of music therapy that apply to neuroplasticity. Finally, examples of how to use neuroplasticity principles to explain and support clinical music therapy will be provided. Using the material presented in this review, music therapists will be equipped with information to effectively communicate why music therapy works using three neuroplasticity principles; increase in dopamine, neural synchrony, and a clear signal. Music therapy is a powerful tool to enhance neuroplasticity in the brain. © the American Music Therapy Association 2014. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Reusable shielding material for neutron- and gamma-radiation

NASA Astrophysics Data System (ADS)

Calzada, Elbio; Grünauer, Florian; Schillinger, Burkhard; Türck, Harald

2011-09-01

At neutron research facilities all around the world radiation shieldings are applied to reduce the background of neutron and gamma radiation as far as possible in order to perform high quality measurements and to fulfill the radiation protection requirements. The current approach with cement-based compounds has a number of shortcomings: "Heavy concrete" contains a high amount of elements, which are not desired to obtain a high attenuation of neutron and/or gamma radiation (e.g. calcium, carbon, oxygen, silicon and aluminum). A shielding material with a high density of desired nuclei such as iron, hydrogen and boron was developed for the redesign of the neutron radiography facility ANTARES at beam tube 4 (located at a cold neutron source) of FRM-II. The composition of the material was optimized by help of the Monte Carlo code MCNP5. With this shielding material a considerable higher attenuation of background radiation can be obtained compared to usual heavy concretes.

Nastic Actuation: Electroosmotic Pumping for Shape-Changing Materials

DTIC Science & Technology

2012-02-23

ELECTROOSMOTIC PUMPING FOR SHAPE-CHANGING MATERIALS Sb. GRANT NUMBER FA9550-09-1-0125 Sc. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Sd. PROJECT NUMBER... Electroosmotic Pumping for Shape-Changing Materials Shapiro, Smela, Fourkas Introduction and Background We had developed a new type of...polymer actuator based on electroosmotic pumping of fluid from one place to another within an elastomeric material. Theoretical calculations showed that

Cassava For Space Diet

NASA Astrophysics Data System (ADS)

Katayama, Naomi; Yamashita, Masamichi; Njemanze, Philip; Nweke, Felix; Mitsuhashi, Jun; Hachiya, Natumi; Miyashita, Sachiko; Hotta, Atuko

Space agriculture is an advanced life support enginnering concept based on biological and ecological system ot drive the materials recycle loop and create pleasant life environment on distant planetary bodies. Choice of space diet is one of primary decision required ot be made at designing space agriculture. We propose cassava, Manihot esculenta and, for one major composition of space food materials, and evaluate its value and feasibility of farming and processing it for space diet. Criteria to select space crop species could be stated as follows. 1) Fill th enutritional requirements. There is no perfect food material to meet this requirements without making a combination with others. A set of food materials which are adopted inthe space recipe shall fit to the nutritional requirement. 2) Space food is not just for maintaining physiological activities of human, but an element of human culture. We shall consider joy of dining in space life. In this context, space foos or recipe should be accepted by future astronauts. Food culture is diverse in the world, and has close relatioship to each cultural background. Cassava root tuber is a material to supply mainly energy in the form of carbohydrate, same as cereals and other tuber crops. Cassava leaf is rich in protein high as 5.1 percents about ten times higher content than its tuber. In the food culture in Africa, cassava is a major component. Cassava root tuber in most of its strain contains cyanide, it should be removed during preparation for cooking. However certain strain are less in this cyanogenic compound, and genetically modified cassava can also aboid this problem safely.

Life stressors, coping strategies, and social supports in patients with irritable bowel syndrome

PubMed Central

Roohafza, Hamidreza; Keshteli, Ammar Hassanzadeh; Daghaghzadeh, Hamed; Afshar, Hamid; Erfani, Zahra; Adibi, Peyman

2016-01-01

Background: The frequency and the perceived intensity of life stressors, coping strategies, and social supports are very important in everybody's well-being. This study intended to estimate the relation of irritable bowel syndrome (IBS) and these factors. Materials and Methods: This was a cross-sectional study carried out in Isfahan on 2013. Data were extracted from the framework of the study on the epidemiology of psychological, alimentary health, and nutrition. Symptoms of IBS were evaluated by Talley bowel disease questionnaire. Stressful life event, modified COPE scale, and Multidimensional Scale of Perceived Social Support were also used. About 4763 subjects were completed questionnaires. Analyzing data were done by t-test and multivariate logistic regression. Results: Of all returned questionnaire, 1024 (21.5%) were diagnosed with IBS. IBS and clinically-significant IBS (IBS-S) groups have significantly experienced a higher level of perceived intensity of stressors and had a higher frequency of stressors. The mean score of social supports and the mean scores of three coping strategies (problem engagement, support seeking, and positive reinterpretation and growth) were significantly lower in subjects with either IBS-S or IBS than in those with no IBS. Multivariate logistic regression revealed a significant association between frequency of stressors and perceived intensity of stressors with IBS (odds ratio [OR] =1.09 and OR = 1.02, respectively) or IBS-S (OR = 1.09 and OR = 1.03, respectively). Conclusions: People with IBS had higher numbers of stressors, higher perception of the intensity of stressors, less adaptive coping strategies, and less social supports which should be focused in psychosocial interventions. PMID:27761433

Relationship between parent–infant attachment and parental satisfaction with supportive nursing care

PubMed Central

Ghadery-Sefat, Akram; Abdeyazdan, Zahra; Badiee, Zohreh; Zargham-Boroujeni, Ali

2016-01-01

Background: Parent–infant attachment is an important factor in accepting parenting role, accelerating infant survival, and adjusting to the environment outside the uterus. Since family supportive interventions can strengthen the parent–infant caring relationship, this study sought to investigate the relationship between mother–infant attachment and satisfaction of the mothers with the supportive nursing care received in the neonatal intensive care unit (NICU). Materials and Methods: In this descriptive–correlational study, 210 mothers with premature infants who were hospitalized in the NICUs affiliated to Isfahan Medical University hospitals took part. The data were collected via Maternal Postnatal Attachment Scale and researcher's self-tailored questionnaire based on Nurse Parent Support Tool. Pearson correlation coefficient and multiple linear regressions were used to analyze the collected data. Results: The results showed that the overall score of mother–infant attachment and the overall score of maternal satisfaction correlated with a correlation coefficient of r = 0.195. Also, the overall score of mother–infant attachment and mothers’ satisfaction scores in the emotional, communicative-informative, and self-confidence domains correlated with correlation coefficients of r = 0.182, r = 0.0.189, and r = 0.0.304, respectively. The results of multiple regression analysis revealed that about 15% of changes in the dependent variable (mother–infant attachment) could be explained by different dimensions of mothers’ satisfaction. Conclusions: The results of the study showed that mother–infant attachment improved by increasing mothers’ satisfaction of supportive nursing care. Therefore, it seems necessary to increase maternal satisfaction through given nursing care support, in order to promote mother–infant attachment. PMID:26985225

Social Background Composition and Educational Growth. Discussion Papers No. 471-77.

ERIC Educational Resources Information Center

Mare, Robert D.

This paper examines the impact of intercohort changes in social background composition on changes in grade progression rates at selected schooling levels. It is argued that the relative and absolute effects of background composition on grade progression rates should decline over levels of schooling. Empirical support for these arguments is…

Parental separation and adult psychological distress: an investigation of material and relational mechanisms

PubMed Central

2014-01-01

Background An association between parental separation or divorce occurring in childhood and increased psychological distress in adulthood is well established. However relatively little is known about why this association exists and how the mechanisms might differ for men and women. We investigate why this association exists, focussing on material and relational mechanisms and in particular on the way in which these link across the life course. Methods This study used the 1970 British Cohort Study (n = 10,714) to investigate material (through adolescent and adult material disadvantage, and educational attainment) and relational (through parent–child relationship quality and adult partnership status) pathways between parental separation (0–16 years) and psychological distress (30 years). Psychological distress was measured using Rutter’s Malaise Inventory. The inter-linkages between these two broad mechanisms across the life course were also investigated. Missing data were multiply imputed by chained equations. Path analysis was used to explicitly model prospectively-collected measures across the life course, therefore methodologically extending previous work. Results Material and relational pathways partially explained the association between parental separation in childhood and adult psychological distress (indirect effect = 33.3% men; 60.0% women). The mechanisms were different for men and women, for instance adult partnership status was found to be more important for men. Material and relational factors were found to interlink across the life course. Mechanisms acting through educational attainment were found to be particularly important. Conclusions This study begins to disentangle the mechanisms between parental separation in childhood and adult psychological distress. Interventions which aim to support children through education, in particular, are likely to be particularly beneficial for later psychological health. PMID:24655926

Spectrophotometric determination of the total flavonoid content in Ocimum basilicum L. (Lamiaceae) leaves

PubMed Central

da Silva, Layzon Antonio Lemos; Pezzini, Bianca Ramos; Soares, Luciano

2015-01-01

Background: The chemical characterization is essential to validate the pharmaceutical use of vegetable raw materials. Ultraviolet spectroscopy is an important technique to determine flavonoids, which are important active compounds from Ocimum basilicum. Objective: The objective of this work was to optimize a spectrophotometric method, based on flavonoid-aluminum chloride (AlCl3) complexation to determine the total flavonoid content (TFC) in leaves of O. basilicum (herbal material), using response surface methodology. Materials and Methods: The effects of (1) the herbal material: Solvent ratio (0.02, 0.03, 0.05, 0.07, and 0.08 g/mL), (2) stock solution volume (0.8, 2.3, 4.4, 6.5, and 8.0 mL) and (3) AlCl3 volume (0.8, 1.0, 1.2, 1.4, and 1.6 mL) on the TFC were evaluated. The analytical performance parameters precision, linearity and robustness of the method were tested. Results: The herbal material: Solvent ratio and stock solution volume showed an important influence on the method response. After choosing the optimized conditions, the method exhibited a precision (RSD%) lower than 6% for repeatability (RSD%) and lower than 8% for intermediate precision (on the order of literature values for biotechnological methods), coefficient of correlation of 0.9984, and no important influence could be observed for variations of the time of complexation with AlCl3. However, the time and temperature of extraction were critical for TFC method and must be carefully controlled during the analysis. Conclusion: Thus, this study allowed the optimization of a simple, fast and precise method for the determination of the TFC in leaves of O. basilicum, which can be used to support the quality assessment of this herbal material. PMID:25709217

Input comparison of radiogenic neutron estimates for ultra-low background experiments

NASA Astrophysics Data System (ADS)

Cooley, J.; Palladino, K. J.; Qiu, H.; Selvi, M.; Scorza, S.; Zhang, C.

2018-04-01

Ultra-low-background experiments address some of the most important open questions in particle physics, cosmology and astrophysics: the nature of dark matter, whether the neutrino is its own antiparticle, and does the proton decay. These rare event searches require well-understood and minimized backgrounds. Simulations are used to understand backgrounds caused by naturally occurring radioactivity in the rock and in every piece of shielding and detector material used in these experiments. Most important are processes like spontaneous fission and (α,n) reactions in material close to the detectors that can produce neutrons. A comparison study of the (α,n) reactions between two dedicated software packages is detailed. The cross section libraries, neutron yields, and spectra from the Mei-Zhang-Hime and the SOURCES-4A codes are presented. The resultant yields and spectra are used as inputs to direct dark matter detector toy models in GEANT4, to study the impact of their differences on background estimates and fits. Although differences in neutron yield calculations up to 50% were seen, there was no systematic difference between the Mei-Hime-Zhang and SOURCES-4A results. Neutron propagation simulations smooth differences in spectral shape and yield, and both tools were found to meet the broad requirements of the low-background community.

Waste recycling issues in bioregenerative life support

NASA Technical Reports Server (NTRS)

Macelroy, R. D.; Wang, D.

1989-01-01

Research and technology development issues centering on the recycling of materials within a bioregenerative life support system are reviewed. The importance of recovering waste materials for subsequent use is emphasized. Such material reclamation will substantially decrease the energy penalty paid for bioregenerative life support systems, and can potentially decrease the size of the system and its power demands by a significant amount. Reclamation of fixed nitrogen and the sugars in cellulosic materials is discussed.

Method for making field-structured memory materials

DOEpatents

Martin, James E.; Anderson, Robert A.; Tigges, Chris P.

2002-01-01

A method of forming a dual-level memory material using field structured materials. The field structured materials are formed from a dispersion of ferromagnetic particles in a polymerizable liquid medium, such as a urethane acrylate-based photopolymer, which are applied as a film to a support and then exposed in selected portions of the film to an applied magnetic or electric field. The field can be applied either uniaxially or biaxially at field strengths up to 150 G or higher to form the field structured materials. After polymerizing the field-structure materials, a magnetic field can be applied to selected portions of the polymerized field-structured material to yield a dual-level memory material on the support, wherein the dual-level memory material supports read-and-write binary data memory and write once, read many memory.

Development and pilot evaluation of novel genetic educational materials designed for an underserved patient population.

PubMed

Lubitz, Rebecca Jean; Komaromy, Miriam; Crawford, Beth; Beattie, Mary; Lee, Robin; Luce, Judith; Ziegler, John

2007-01-01

Genetic counseling for BRCA1 and BRCA2 mutations involves teaching about hereditary cancer, genetics and risk, subjects that are difficult to grasp and are routinely misunderstood. Supported by a grant from the Avon Foundation, the UCSF Cancer Risk Program started the first genetic testing and counseling service for a population of traditionally underserved women of varied ethnic and social backgrounds at the San Francisco General Hospital (SFGH). Informed by educational theory and clinical experience, we devised and piloted two simplified explanations of heredity and genetic risk, with the aim of uncovering how to best communicate genetics and risk to this underserved population. A "conventional" version comprised pictures of genes, pedigrees, and quantitative representations of risk. A "colloquial" pictorial version used an analogy of the "information book" of genes, family stories and vignettes, and visual representations of risk, without using scientific words such as genes or chromosomes. A verbal narrative accompanied each picture. We presented these modules to four focus groups of five to eight women recruited from the SFGH Family Practice Clinic. Overall, women preferred a picture-based approach and commented that additional text would have been distracting. The majority of women preferred the colloquial version because it was easier to understand and better conveyed a sense of comfort and hope. We conclude that simplicity, analogies, and familiarity support comprehension while vignettes, family stories, and photos of real people provide comfort and hope. These elements may promote understanding of complex scientific topics in healthcare, particularly when communicating with patients who come from disadvantaged backgrounds.

Cooperative oscillations of electron-copper-oxygen interaction: Possible relevance for superconduction theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tributsch, H.

1989-01-01

Interfaces of copper containing crystallized materials (Cu/sub 5/FeS/sub 4/, CuFeS/sub 2/, Cu/sub 2/S, CuS, CuInS/sub 2/, and CuInSe/sub 2/), exposed to oxidation by H/sub 2/O/sub 2/, undergo sustained electrochemical oscillations. They involve electronic (Cu/sup +/), (Cu/sup 2 +/), and (Cu/sup 3 +/) interactions with chemically bound oxygen similar as in superconducting YBa/sub 2/Cu/sub 3/O/sub 7/ or (La,Sr)/sub 2/CuO/sub 4/ and may be a phenomenon of irreversible thermodynamics which is related to the kind of cooperative electron-copper-oxygen interactions which also give rise to high-temperature superconduction. The relevance of the model system is supported by the formation of the H/sub 2/O/sub 2/more » species on the surface of high-temperature superconducting materials in contact with ambiental humidity. It is shown how, by a simple modification of the interaction mechanism, an oscillatory phenomenon such as that observed with oxidized copper sulfide interfaces, which follows a limiting cycle, can be converted into a triple-state phenomenon. Such a cooperative mechanism that involves a lowest steady state which is unable to turn over energy may be the background for the pairing of electrons or a related cooperative interaction process in superconduction. As a possible support, no interfacial oscillations could yet be induced with Ba/sub 2/Cu/sub 3/Y/sub 7/.« less

Two dimensional alveolar ridge augmentation using particulate hydroxyapatite and collagen membrane: A case report

PubMed Central

Singh, Aparna; Daing, Anika; Anand, Vishal; Dixit, Jaya

2014-01-01

Background Ridge augmentation procedures require bone regeneration outside of the existing bony walls or housing and are therefore often considered to be the most challenging surgical procedures. The bony deficiencies can be managed with GBR techniques involving bone grafting material and membrane while vertical augmentation may require the use of space-creating support mechanisms. Non-degradable membranes have been used for ridge augmentation with encouraging results however; requirement of second surgery for its removal and associated infection on exposure may compromise the desired results. These problems can be overcome by employing resorbable collagen membranes. Different bone graft materials are also used in combination with resorbable membranes, for prevention of membrane collapse and maintenance of space, as they lack sufficient rigidity. Particulate hydroxyapatite bone graft may be better alternative, because it treats the underlying bone defect to restore the natural support of the tissue architecture. Moreover, its use avoids potential donor site complications associated with autogenous block grafts. Method Patient described in this report presented with missing right maxillary incisor with ridge deficiency. A treatment approach involving localised ridge augmentation with particulate hydroxyapatite and collagen membrane was used. Result Six month post-operative periapical radiograph demonstrated a significant vertical bone fill. Conclusion The clinical and radiographic findings of the present case suggests that HA in conjunction with a resorbable collagen membrane may be an acceptable alternative to the autogenous block graft and non-resorbable membrane in the treatment of compromised alveolar ridge deficiencies. PMID:25737935

Embedded arrays of vertically aligned carbon nanotube carpets and methods for making them

DOEpatents

Kim, Myung Jong; Nicholas, Nolan Walker; Kittrell, W. Carter; Schmidt, Howard K.

2015-06-30

According to some embodiments, the present invention provides a system and method for supporting a carbon nanotube array that involve an entangled carbon nanotube mat integral with the array, where the mat is embedded in an embedding material. The embedding material may be depositable on a carbon nanotube. A depositable material may be metallic or nonmetallic. The embedding material may be an adhesive material. The adhesive material may optionally be mixed with a metal powder. The embedding material may be supported by a substrate or self-supportive. The embedding material may be conductive or nonconductive. The system and method provide superior mechanical and, when applicable, electrical, contact between the carbon nanotubes in the array and the embedding material. The optional use of a conductive material for the embedding material provides a mechanism useful for integration of carbon nanotube arrays into electronic devices.

The horizon line, linear perspective, interposition, and background brightness as determinants of the magnitude of the pictorial moon illusion.

PubMed

Jones, Stephanie A H; Wilson, Alexander E

2009-01-01

A total of 110 undergraduate students participated in a series of three experiments that explored the magnitude of the moon illusion in pictures. Experiment 1 examined the role of the number and salience of depth cues and background brightness. Experiment 2 examined the role of the horizon line, linear perspective, interposition, and background brightness. In Experiment 3, comparative distance judgments of the moon as a function of linear perspective, interposition, and the size of the standard moon were obtained. The magnitude of the moon illusion increased as a function of the number and salience of depth cues and changes in background brightness. Experiment 2 failed to support the role of the horizon line in affecting the illusion. Experiment 3 provided additional support for the illusory distance component of the moon illusion.

Picosecond Vibrational Spectroscopy of Shocked Energetic Materials

NASA Astrophysics Data System (ADS)

Franken, Jens; Hare, David; Hambir, Selezion; Tas, Guray; Dlott, Dana

1997-07-01

We present a new technique which allows the study of the properties of shock compressed energetic materials via vibrational spectroscopy with a time resolution on the order of 25 ps. Shock waves are generated using a near-IR laser at a repetition rate of 80 shocks per second. Shock pressures up to 5 GPa are obtained; shock risetimes are as short as 25 ps. This technique enables us to estimate shock pressures and temperatures as well as to monitor shock induced chemistry. The shock effects are probed by ps coherent anti-Stokes Raman spectroscopy (CARS). The sample consists of four layers, a glass plate, a thin polycrystalline layer of an energetic material, a buffer layer and the shock generating layer. The latter is composed of a polymer, a near-IR absorbing dye and a high explosive (RDX) as a pressure booster. The main purpose of the buffer layer, which consists of an inert polymer, is to delay the arrival of the shock wave at the sample by more than 1 ns until after the shock generating layer has ablated away. High quality, high resolution (1 cm-1) low-background vibrational spectra could be obtained. So far this technique has been applied to rather insensitive high explosives such as TATB and NTO. In the upcoming months we are hoping to actually observe chemistry in real time by shocking more sensitive materials. This work was supported by the NSF, the ARO and the AFOSR

The Cultured Word: Cultural Background, Bilingualism, and the School Library.

ERIC Educational Resources Information Center

Agosto, Denise E.

2001-01-01

Presents major research related to cultural background as a framework for textual meaning-making, bilingualism, and literacy development. Discusses bilingualism, literacy, and social context; considers why these issues are important to school librarians; and offers suggestions for making multicultural materials central aspects of school library…

76 FR 23515 - Enhanced Weapons, Firearms Background Checks, and Security Event Notifications

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... material and would add new event notification requirements on the theft or loss of enhanced weapons...-2011-0017] RIN 3150-AI49 Enhanced Weapons, Firearms Background Checks, and Security Event Notifications... regulations governing security event notifications. These proposed regulations are consistent with the...

Liberty Centennial Student Campaign Manual.

ERIC Educational Resources Information Center

Statue of Liberty-Ellis Island Foundation, New York, NY.

Background readings and project ideas to involve elementary and secondary school students in fundraising for the restoration of the Statue of Liberty are provided. Materials can be divided into two sections. The first section, background readings, contains President Ronald Reagan's opening remarks at the ceremony introducing the Statue of…

Radon and material radiopurity assessment for the NEXT double beta decay experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cebrián, S.; Dafni, T.; González-Díaz, D.

The ”Neutrino Experiment with a Xenon TPC” (NEXT), intended to investigate the neutrinoless double beta decay using a high-pressure xenon gas TPC filled with Xe enriched in {sup 136}Xe at the Canfranc Underground Laboratory in Spain, requires ultra-low background conditions demanding an exhaustive control of material radiopurity and environmental radon levels. An extensive material screening process is underway for several years based mainly on gamma-ray spectroscopy using ultra-low background germanium detectors in Canfranc but also on mass spectrometry techniques like GDMS and ICPMS. Components from shielding, pressure vessel, electroluminescence and high voltage elements and energy and tracking readout planes havemore » been analyzed, helping in the final design of the experiment and in the construction of the background model. The latest measurements carried out will be presented and the implication on NEXT of their results will be discussed. The commissioning of the NEW detector, as a first step towards NEXT, has started in Canfranc; in-situ measurements of airborne radon levels were taken there to optimize the system for radon mitigation and will be shown too.« less

SSMILES.

ERIC Educational Resources Information Center

Berlin, Donna

1990-01-01

Provides an activity for determining the relationship between the displacement of light rays passing through a plate of transparent material and the angle of refraction for the material. Describes related concepts and skills, prerequisites, objectives, rationale, content background, lesson outline, worksheet, evaluation, teacher notes, and…

The Effect of Arch Height and Material Hardness of Personalized Insole on Correction and Tissues of Flatfoot

PubMed Central

Su, Shonglun; Mo, Zhongjun; Guo, Junchao

2017-01-01

Flat foot is one of the common deformities in the youth population, seriously affecting the weight supporting and daily exercising. However, there is lacking of quantitative data relative to material selection and shape design of the personalized orthopedic insole. This study was to evaluate the biomechanical effects of material hardness and support height of personalized orthopedic insole on foot tissues, by in vivo experiment and finite element modeling. The correction of arch height increased with material hardness and support height. The peak plantar pressure increased with the material hardness, and these values by wearing insoles of 40° were apparently higher than the bare feet condition. Harder insole material results in higher stress in the joint and ligament stress than softer material. In the calcaneocuboid joint, the stress increased with the arch height of insoles. The material hardness did not apparently affect the stress in the ankle joints, but the support heights of insole did. In general, insole material and support design are positively affecting the correction of orthopedic insole, but negatively resulting in unreasonable stress on the stress in the joint and ligaments. There should be an integration of improving correction and reducing stress in foot tissues. PMID:29065655

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Alan E.

Here, proposed dark matter detectors with eV-scale sensitivities will detect a large background of atomic (nuclear) recoils from coherent photon scattering of MeV-scale photons. This background climbs steeply below ~10 eV, far exceeding the declining rate of low-energy Compton recoils. The upcoming generation of dark matter detectors will not be limited by this background, but further development of eV-scale and sub-eV detectors will require strategies, including the use of low nuclear mass target materials, to maximize dark matter sensitivity while minimizing the coherent photon scattering background.

The background in a balloon-borne fluorescence-gated proportional counter

NASA Technical Reports Server (NTRS)

Ramsey, B. D.; Bower, C. R.; Dietz, K. L.; Weisskopf, M. C.

1990-01-01

The results of an analysis of the background in a fluorescence-gated proportional counter operating over the energy range 3-150 keV are presented. It is found that the dominant background component is that produced by high energy qamma-rays that penetrate the shields and undergo multiple scattering in the detector body, resulting in photoelectric absorption in the detector gas. A careful choice of materials and thickness can move the peak of this emission outside of the detector sensitive range, thereby dramatically reducing the residual background.

Figure/Ground Segmentation via a Haptic Glance: Attributing Initial Finger Contacts to Objects or Their Supporting Surfaces.

PubMed

Pawluk, D; Kitada, R; Abramowicz, A; Hamilton, C; Lederman, S J

2011-01-01

The current study addresses the well-known "figure/ground" problem in human perception, a fundamental topic that has received surprisingly little attention from touch scientists to date. Our approach is grounded in, and directly guided by, current knowledge concerning the nature of haptic processing. Given inherent figure/ground ambiguity in natural scenes and limited sensory inputs from first contact (a "haptic glance"), we consider first whether people are even capable of differentiating figure from ground (Experiments 1 and 2). Participants were required to estimate the strength of their subjective impression that they were feeling an object (i.e., figure) as opposed to just the supporting structure (i.e., ground). Second, we propose a tripartite factor classification scheme to further assess the influence of kinetic, geometric (Experiments 1 and 2), and material (Experiment 2) factors on haptic figure/ground segmentation, complemented by more open-ended subjective responses obtained at the end of the experiment. Collectively, the results indicate that under certain conditions it is possible to segment figure from ground via a single haptic glance with a reasonable degree of certainty, and that all three factor classes influence the estimated likelihood that brief, spatially distributed fingertip contacts represent contact with an object and/or its background supporting structure.

Antibiotic Resistance in Sepsis Patients: Evaluation and Recommendation of Antibiotic Use

PubMed Central

Pradipta, Ivan Surya; Sodik, Dian Chairunnisa; Lestari, Keri; Parwati, Ida; Halimah, Eli; Diantini, Ajeng; Abdulah, Rizky

2013-01-01

Background: The appropriate selection of empirical antibiotics based on the pattern of local antibiotic resistance can reduce the mortality rate and increase the rational use of antibiotics. Aims: We analyze the pattern of antibiotic use and the sensitivity patterns of antibiotics to support the rational use of antibiotics in patients with sepsis. Materials and Methods: A retrospective observational study was conducted in adult sepsis patient at one of Indonesian hospital during January-December 2011. Data were collected from the hospital medical record department. Descriptive analysis was used in the processing and interpretation of data. Results: A total of 76 patients were included as research subjects. Lung infection was the highest source of infection. In the 66.3% of clinical specimens that were culture positive for microbes, Klebsiella pneumoniae, Escherichia coli, Staphylococcus hominis were detected with the highest frequency. The six most frequently used antibiotics, levofloxacin, ceftazidime, ciprofloxacin, cefotaxime, ceftriaxone, and erythromycin, showed an average resistance above 50%. Conclusions: The high use of antibiotic with a high level resistance requires a policy to support its rational use. Local microbial pattern based on site infection and pattern of antibiotics sensitivity test can be used as supporting data to optimize appropriateness of empirical antibiotics therapy in sepsis patients. PMID:23923107

Stroke Health and Risk Education (SHARE): Design, methods, and theoretical basis

PubMed Central

Brown, Devin L.; Conley, Kathleen M.; Resnicow, Kenneth; Murphy, Jillian; Sánchez, Brisa N.; Cowdery, Joan E.; Sais, Emma; Lisabeth, Lynda D.; Skolarus, Lesli E.; Zahuranec, Darin B.; Williams, Geoffrey C.; Morgenstern, Lewis B.

2012-01-01

Background Stroke is a disease with tremendous individual, family, and societal impact across all race/ethnic groups. Mexican Americans, the largest subgroup of Hispanic Americans, are at even higher risk of stroke than European Americans. Aim To test the effectiveness of a culturally sensitive, church-based, multicomponent, motivational enhancement intervention for Mexican Americans and European Americans in reducing stroke risk factors. Methods Participants enroll in family or friendship pairs, from the same Catholic church in the Corpus Christi Texas area, and are encouraged to change diet and physical activity behaviors and provide support for behavior change to their partners. Churches are randomized to either the intervention or control group. Goal enrollment for each of the 10 participating churches is 40 participant pairs. The intervention consists of self-help materials (including a motivational short film, cookbook/healthy eating guide, physical activity guide with pedometer, and photonovella), five motivational interviewing calls, two tailored newsletters, parish health promotion activities and environmental changes, and a peer support workshop where participants learn to provide autonomy supportive counseling to their partner. SHARE’s three primary outcomes are self-reported sodium intake, fruit and vegetable intake, and level of physical activity. Participants complete questionnaires and have measurements at baseline, six months, and twelve months. Persistence testing is performed at 18 months in the intervention group. PMID:22421317

Investigating Teacher Learning Supports in High School Biology Curricular Programs to Inform the Design of Educative Curriculum Materials

ERIC Educational Resources Information Center

Beyer, Carrie J.; Delgado, Cesar; Davis, Elizabeth A.; Krajcik, Joseph

2009-01-01

Reform efforts have emphasized the need to support teachers' learning about reform-oriented practices. Educative curriculum materials are one potential vehicle for promoting teacher learning about these practices. Educative curriculum materials include supports that are intended to promote both student "and" teacher learning. However, little is…

Crank shaft support assembly

DOEpatents

Natkin, Robert J.; Oltmans, Bret; Allison, John E.; Heater, Thomas J.; Hines, Joy Adair; Tappen, Grant K.; Peiskammer, Dietmar

2007-10-23

A crank shaft support assembly for increasing stiffness and reducing thermal mismatch distortion in a crank shaft bore of an engine comprising different materials. A cylinder block comprises a first material and at least two crank journal inserts are insert-molded into respective crank journal regions of the cylinder block and comprise a second material having greater stiffness and a lower thermal coefficient of expansion that the first material. At least two bearing caps are bolted to the respective crank journal inserts and define, along with the crank journal inserts, at least two crank shaft support rings defining a crank shaft bore coaxially aligned with a crank shaft axis. The bearing caps comprise a material having higher stiffness and a lower thermal coefficient of expansion than the first material and are supported on the respective crank journal inserts independently of any direct connection to the cylinder block.

The Relationship between Perceived Social Support in the First Pregnancy and Fear of Childbirth

PubMed Central

Azimi, Masoomeh; Fahami, Fariba; Mohamadirizi, Soheila

2018-01-01

Background: Numerous empirical evidences have shown that social and environmental circumstances and social relations have an important impact on pregnancy outcomes, women's ability to cope with stressful situations, and childbirth pain management. The present study was conducted to determine the relationship between perceived social support and fear of childbirth. Materials and Methods: The present descriptive correlational study was conducted on 270 nulliparous pregnant women who referred for pregnancy care in 2016. The subjects were selected through convenience sampling method. The data collection tools were a demographic characteristics form, the Multidimensional Scale of Perceived Social Support (MSPSS), and the Wijma Delivery Expectancy/Experience Questionnaire (W-DEQ). The collected data were analyzed using descriptive and inferential statistics tests. Results: The mean perceived social support score of the participants was 77.90 and a significant correlation was observed between the perceived social support score and fear of childbirth score (β = −0.18, p = 0.004). The participants' mean score of fear of childbirth was 36.8. The results of study after the evaluation of the effect of predictive variables on the fear of childbirth are as follows: pregnancy preparation classes: (β = 3.50, p = 0.220); observation of natural childbirth videos: (β = 5.26, p = 0.040); and use of educational software: (β =5.82, p = 0.080). Conclusions: In order to reduce the fear of childbirth, women's social support structure during pregnancy should be assessed. Moreover, demographic characteristics form the structure and determine the extent of individuals' social network and, through the evaluation of these characteristics during pregnancy, the rate of effective support can be predicted in individuals. PMID:29861764

Effect of the background solution and material composition on the transport of silver nanoparticles in saturated aquifer materials

NASA Astrophysics Data System (ADS)

Adrian, Yorck; Schneidewind, Uwe; Fernandez-Steeger, Tomas; Azzam, Rafig

2016-04-01

Engineered silver nanoparticles (AgNP) are used in various consumer products such as cloth or personal care products due to their antimicrobial properties (Benn et al., 2010). Their transport behavior in the environment is still under investigation. Previous studies have been focusing on the transport of AgNP in simple test systems with glass beads or soil materials (Braun et al., 2015), but studies investigating aquifer material are rare. However, the protection of fresh water resources in the subsurface is an important part in the protection of human health and the assurance of future economic activities. Therefore, expert knowledge regarding the transport and fate of engineered nanoparticles as potential contaminants in aquifers is essential. Within the scope of the research project NanoMobil funded by German Federal Ministry of Education and Research, the transport and retention behavior of AgNP in aquifer material was investigated under saturated conditions in laboratory columns for different flow velocities, ionic strengths (IS) and background solutions. The used aquifer material consisted mainly of quartz and albite. The quartz grains were partially coated with iron hydroxides and oxides. Furthermore, 1% hematite was present in the silicate dominated aquifer material. The experiments were conducted using NaNO3 and Ca(NO3)2 background solutions to examine the effects of monovalent and divalent cations on the transport of AgNP. Flow velocities in the columns were chosen to represent typical flow velocities of groundwater in the subsurface. For the experiments two mean grain sizes of 0.3 and 0.7 mm were used to investigate the effect of the grain size on the transport behavior. Particle concentration was measured using ICP-MS and particle size was determined using flow field-flow fractionation (FlFFF). HYDRUS-1D (Šimůnek et al., 2013) was used to elucidate the transport and retention processes of the AgNP in the aquifer material. The obtained results show that grain size and background solution as well as mineral composition have an effect on the retention of AgNP. A higher breakthrough of about 75% was observed in the more coarse material compared to 60% in the fine material. Especially, iron oxides and hydroxides provided favorable attachment points for AgNP. Complete retention of AgNP in the aquifer material occurred at 1.5 and 1 mM IS when Ca(NO3)2 was used as background solution and little breakthrough was observed at 0.5 mM IS. In contrast, when using NaNO3 (1 and 10 mM) a breakthrough of about 50% of the AgNP was observed for 1 mM IS whereas no breakthrough occurred for 10 mM IS. The results show that the divalent background ions and a high ionic strength tend to reduce the transport of silver nanoparticles in aquifer material with this composition. References Benn, T., Cavanagh, B., Hristovski, K., Posner, J. D. and Westerhoff, P. (2010): The release of nanosilver from consumer products used in the home. Journal of Environmental Quality, 39, 1875-1882. Braun, A.; Klumpp, E.; Azzam, R. and Neukum, C. (2015): Transport and deposition of stabilized engineered silver nanoparticles in water saturated loamy sand and silty loam. Science of the Total Environment, 535, 102-112. Šimůnek, J., Šenja, M., Saito, H., Sakai, M., and van Genuchten, M. T. (2013), The Hydrus-1D Software Package for Simulating the Movement of Water, Heat, and Multiple Solutes in Variably Saturated Media, Version 4.17, 342 pp, Department of Environmental Sciences, University of California Riverside, Riverside, California, USA.

Neutron-absorber release device

DOEpatents

VAN Erp, Jan B.; Kimont, Edward L.

1976-01-01

A resettable device is provided for supporting an object, sensing when an environment reaches a critical temperature and releasing the object when the critical temperature is reached. It includes a flexible container having a material inside with a melting point at the critical temperature. The object's weight is supported by the solid material which gives rigidity to the container until the critical temperature is reached at which point the material in the container melts. The flexible container with the now fluid material inside has insufficient strength to support the object which is thereby released. Biasing means forces the container back to its original shape so that when the temperature falls below the melting temperature the material again solidifies, and the object may again be supported by the device.

Development of a Design Supporting System for Nano-Materials based on a Framework for Integrated Knowledge of Functioning-Manufacturing Process

NASA Astrophysics Data System (ADS)

Tarumi, Shinya; Kozaki, Kouji; Kitamura, Yoshinobu; Mizoguchi, Riichiro

In the recent materials research, much work aims at realization of ``functional materials'' by changing structure and/or manufacturing process with nanotechnology. However, knowledge about the relationship among function, structure and manufacturing process is not well organized. So, material designers have to consider a lot of things at the same time. It would be very helpful for them to support their design process by a computer system. In this article, we discuss a conceptual design supporting system for nano-materials. Firstly, we consider a framework for representing functional structures and manufacturing processes of nano-materials with relationships among them. We expand our former framework for representing functional knowledge based on our investigation through discussion with experts of nano-materials. The extended framework has two features: 1) it represents functional structures and manufacturing processes comprehensively, 2) it expresses parameters of function and ways with their dependencies because they are important for material design. Next, we describe a conceptual design support system we developed based on the framework with its functionalities. Lastly, we evaluate the utility of our system in terms of functionality for design supports. For this purpose, we tried to represent two real examples of material design. And then we did an evaluation experiment on conceptual design of material using our system with the collaboration of domain experts.

Selected Bibliography on Culture and Cultural Materials, Preliminary Edition. Series A: Reference Materials, Human Relations in Cultural Context.

ERIC Educational Resources Information Center

Condon, E. C.; And Others

Included in this bibliography are references to resources and materials available to the teacher and educator on human relations and cultural education. The bibliography is divided into three sections on culture, specific culture, and adult bilingual-bicultural education. The section on culture presents background information on the relation of…

75 FR 38168 - Hazardous Materials: International Regulations for the Safe Transport of Radioactive Material (TS...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... (IAEA) ``Regulations for the Safe Transport of Radioactive Material'' (TS-R-1), which is scheduled for... comments on the draft document to the IAEA. We are requesting input from the public to assist in developing....gov . SUPPLEMENTARY INFORMATION: I. Background The IAEA works with its Member States and multiple...

Short Term Innovative Research Program: Nanoengineered Reactive Materials for Tunable Ignition and Energy Release

DTIC Science & Technology

2009-01-01

Background Most conventional explosives can be roughly categorized into two classes – molecular materials and intermolecular composites. Molecular...materials refer to species such as the nitroalkanes (e.g. nitromethane ) and cyclic nitramines (e.g. TNAZ, RDX, HMX) that release chemical energy...alternative to conventional explosives that has been gaining increasing interest have been termed reactive materials, and are defined as systems in

Ion exchange materials, method of forming ion exchange materials, and methods of treating liquids

DOEpatents

Wertsching, Alan K.; Peterson, Eric S.; Wey, John E.

2007-12-25

The invention includes an ion affinity material having an organic component which is sulfonated and which is chemically bonded to an inorganic substrate component. The invention includes a method of forming a metal binding material. A solid support material comprising surface oxide groups is provided and an organic component having at least one alkyl halide is covalently linked to at least some of the surface oxide groups to form a modified support material. The at least one alkyl halide is subsequently converted into an alkyl sulfonate. The invention further includes a method and system for extracting ions from a liquid. An ion exchange material having a sulfonated alkyl silane component covalently bonded to a metal oxide support material is provided and a liquid is exposed to the ion exchange material.

Associations between social support network characteristics and receipt of emotional and material support among a sample of male sexual minority youth

PubMed Central

Kapadia, Farzana; Halkitis, Perry; Barton, Staci; Siconolfi, Daniel; Figueroa, Rafael Perez

2014-01-01

Few studies have examined how social support network characteristics are related to perceived receipt of social support among male sexual minority youth. Using egocentric network data collected from a study of male sexual minority youth (n=592), multivariable logistic regression analyses examined distinct associations between individual and social network characteristics with receipt of (1) emotional and (2) material support. In multivariable models, frequent communication and having friends in one’s network yielded a two-fold increase in the likelihood of receiving emotional support whereas frequent communication was associated with an almost three-fold higher likelihood of perceived material support. Finally, greater internalized homophobia and personal experiences of gay-related stigma were inversely associated with perceived receipt of emotional and material support, respectively. Understanding the evolving social context and social interactions of this new generation of male sexual minority youth is warranted in order to understand the broader, contextual factors associated with their overall health and well-being. PMID:25214756

Radiological Health Protection Issues Associated with Use of Active Detection Technology Systems for Detection of Radioactive Threat Materials

DTIC Science & Technology

2013-07-01

detection system available will simply register events resulting from natural background radiation if a suitable source emission is not employed. The...random fluctuations in the natural background radiation level. Noise within the detection system can result from any of the various components that...Uritani et al., 1994). Nothing can generally be done to reduce or stabilize the amount of natural background radiation present for nonstationary

Cosmogenic production of tritium in dark matter detectors

NASA Astrophysics Data System (ADS)

Amaré, J.; Castel, J.; Cebrián, S.; Coarasa, I.; Cuesta, C.; Dafni, T.; Galán, J.; García, E.; Garza, J. G.; Iguaz, F. J.; Irastorza, I. G.; Luzón, G.; Martínez, M.; Mirallas, H.; Oliván, M. A.; Ortigoza, Y.; Ortiz de Solórzano, A.; Puimedón, J.; Ruiz-Chóliz, E.; Sarsa, M. L.; Villar, J. A.; Villar, P.

2018-01-01

The direct detection of dark matter particles requires ultra-low background conditions at energies below a few tens of keV. Radioactive isotopes are produced via cosmogenic activation in detectors and other materials and those isotopes constitute a background source which has to be under control. In particular, tritium is specially relevant due to its decay properties (very low endpoint energy and long half-life) when induced in the detector medium, and because it can be generated in any material as a spallation product. Quantification of cosmogenic production of tritium is not straightforward, neither experimentally nor by calculations. In this work, a method for the calculation of production rates at sea level has been developed and applied to some of the materials typically used as targets in dark matter detectors (germanium, sodium iodide, argon and neon); it is based on a selected description of tritium production cross sections over the entire energy range of cosmic nucleons. Results have been compared to available data in the literature, either based on other calculations or from measurements. The obtained tritium production rates, ranging from a few tens to a few hundreds of nuclei per kg and per day at sea level, point to a significant contribution to the background in dark matter experiments, requiring the application of specific protocols for target material purification, material storing underground and limiting the time the detector is on surface during the building process in order to minimize the exposure to the most dangerous cosmic ray components.

The Development of Man and His Culture: New World Prehistory. Grade Two. Teacher's Guide [And] Teacher Background Material [And] Pupil Text [And] Pupil's Study Guide [And] A Sequential Curriculum in Anthropology. Test: Form 2, Composite Form for Pre- and Post-test. Publications No. 28, 29, 30, 33 and 41.

ERIC Educational Resources Information Center

Austin, Carol E.; And Others

The social studies unit includes a teaching guide, teacher background material, student text, study guide, and composite pretest/posttest. Subject matter focuses on archaeological methods, history of man in America, and the Hopi Indians in the past and present. The unit is part of the Anthropology Curriculum Project and is designed to be used in…

Chem I Supplement: Nuclear Synthesis and Identification of New Elements.

ERIC Educational Resources Information Center

Seaborg, Glenn T.

1985-01-01

As background material for a paper on the transuranium elements (SE 537 837), this article reviews: (1) several descriptive terms; (2) nuclear reactions; (3) radioactive decay modes; (4) chemical background; and (5) experimental methods used in this field of research and more broadly in nuclear chemistry. (Author/JN)

Increasing Educational Efficiency Through Technology (Commission Discussion and Background Materials).

ERIC Educational Resources Information Center

Indiana State Commission for Higher Education, Indianapolis.

A program schedule and background information for Indiana Commission for Higher Education-sponsored discussion of the use of educational technology to increase educational effeciency are presented. The four major topics of discussion to illustrate the uses and advantages/disadvantages of audio, video, and computing technologies are as follows:…

Playground Perspectives: A Curriculum Guide for Promoting Playground Safety.

ERIC Educational Resources Information Center

Daugs, Donald R.; Fukui, Francine

This curriculum guide is an interdisciplinary approach designed to reduce childhood accidental injuries on the playground. Materials are designed to provide background information and teaching resources for teachers that will be useable in a wide variety of environments. The first chapter provides a general background on playground hazards and…

Acid Rain Materials for Classroom Use.

ERIC Educational Resources Information Center

Factor, Lance; Kooser, Robert G.

This booklet contains three separate papers suitable for use in an advanced high school or college chemistry course. The first paper provides background information on acids and bases. The second paper provides additional background information, focusing on certain aspects of atmospheric chemistry as it relates to the acid rain problem. An attempt…

Infrared detectors and test technology of cryogenic camera

NASA Astrophysics Data System (ADS)

Yang, Xiaole; Liu, Xingxin; Xing, Mailing; Ling, Long

2016-10-01

Cryogenic camera which is widely used in deep space detection cools down optical system and support structure by cryogenic refrigeration technology, thereby improving the sensitivity. Discussing the characteristics and design points of infrared detector combined with camera's characteristics. At the same time, cryogenic background test systems of chip and detector assembly are established. Chip test system is based on variable cryogenic and multilayer Dewar, and assembly test system is based on target and background simulator in the thermal vacuum environment. The core of test is to establish cryogenic background. Non-uniformity, ratio of dead pixels and noise of test result are given finally. The establishment of test system supports for the design and calculation of infrared systems.

Field scale manure born animal waste management : GIS application

USDA-ARS?s Scientific Manuscript database

Intensive beef backgrounding often accumulate manure born soil nutrients, microbes, and pharmaceuticals at different site locations. Unless properly managed, such waste materials can pollute surrounding soil and water sources. Soil sampling from these sites helps determining waste material levels bu...

Brownfields Recover Your Resources - Reduce, Reuse, and Recycle Construction and Demolition Materials at Land Revitalization Projects

EPA Pesticide Factsheets

This document provides background information on how the sustainable reuse of brownfield properties includes efforts to reduce the environmental impact by reusing and recycling materials generated during building construction, demolition, or renovation.

The development of effective behaviour change interventions to support the use of malaria rapid diagnostic tests by Tanzanian clinicians

PubMed Central

2014-01-01

Background Parasitological confirmation is now recommended for all cases of suspected malaria. The roll-out of rapid diagnostic tests (RDTs) is hoped to enable this goal in low resource settings through point of care testing. However, simply making RDTs available has not led to high uptake of the tests or adherence to results by clinicians, with malaria continuing to be overdiagnosed in many settings. We undertook to design an evidence-based intervention package that would be sufficient to support the introduction of RDTs at dispensaries in Tanzania, to be evaluated through the Targeting Artemisinin Combination Therapy (TACT) cluster randomised controlled trial. Methods We describe five steps in our intervention design: formative research, review of existing evidence and theory, a workshop to define the intervention approach and content and results of formative research, engagement with behaviour change theory and literature, detailed design of intervention materials and piloting and pretesting of intervention materials. This involved fieldwork with a total of 19 health workers and 212 community members in northeast Tanzania. Results The formative research suggested that RDTs were a potential source of conflict in the health worker-patient interaction, but that health workers used various techniques to resolve this, including provision of antimalarial drugs for RDT-negative patients. Our reviews showed that evidence was mixed regarding the effectiveness of different methods and theories to support change in prescribing practice. Our design process is presented, drawing from this collective evidence. We describe the final TACT intervention package (including interactive small group workshops, feedback text messages, motivational text messages and patient information leaflets and posters) in terms of its programme theory and implementation theory. Conclusions Our study suggests that evidence-based design of complex interventions is possible. The use of formative research to understand malaria overdiagnosis in context was central to the design of the intervention as well as empirical research to test materials and methods prior to implementation. The TACT interventions may be appropriate for other settings where clinicians face similar challenges with malaria diagnostics. Trial registration NCT01292707. PMID:24969367

A new surgical technique using steel suture for trans-scleral fixation of posterior chamber intraocular lenses

PubMed Central

Ram, Jagat; Gupta, Nishant; Chaudhary, Manish; Verma, Neelam

2013-01-01

Background: A new emerging complication of trans-scleral fixation of posterior chamber (PC) intraocular lens (IOL) with polypropylene suture is high rates of spontaneous dislocation of the IOL due to disintegration or breakage of suture. Materials: We report a new surgical technique of trans-scleral fixation of posterior chamber intraocular lens (SF PCIOL) with steel suture to eliminate the complication of dislocation of IOL fixed with polypropylene suture in one adult and a child. Results: We successfully achieved stable fixation and good centration of IOL after SF PCIOL with steel suture in these patient having inadequate posterior capsular support. Both eyes achieved best corrected visual acuity 20/40 at 18 months follow-up. Conclusions: Steel suture is a viable option for trans-scleral fixation of posterior chamber intraocular lens. PMID:23619504

The use of fractional orders in the determination of birefringence of highly dispersive materials by the channelled spectrum method

NASA Astrophysics Data System (ADS)

Nagarajan, K.; Shashidharan Nair, C. K.

2007-07-01

The channelled spectrum employing polarized light interference is a very convenient method for the study of dispersion of birefringence. However, while using this method, the absolute order of the polarized light interference fringes cannot be determined easily. Approximate methods are therefore used to estimate the order. One of the approximations is that the dispersion of birefringence across neighbouring integer order fringes is negligible. In this paper, we show how this approximation can cause errors. A modification is reported whereby the error in the determination of absolute fringe order can be reduced using fractional orders instead of integer orders. The theoretical background for this method supported with computer simulation is presented. An experimental arrangement implementing these modifications is described. This method uses a Constant Deviation Spectrometer (CDS) and a Soleil Babinet Compensator (SBC).

Perceived Support in Sibling Relationships and Adolescent Adjustment

ERIC Educational Resources Information Center

Branje, Susan J. T.; Van Lieshout, Cornelis F. M.; Van Aken, Marcel A. G.; Haselager, Gerbert J. T.

2004-01-01

Background: Siblings may support each other, but also reveal fierce rivalry and mutual aggression. Supportive sibling relationships have been linked to the development of psychosocial competence of children. In the present longitudinal study, we will focus on the development of perceived support in sibling dyads and on the influence of sibling…

Associations of Structural and Functional Social Support with Diabetes Prevalence in U.S. Hispanics/Latinos: Results from the HCHS/SOL Sociocultural Ancillary Study

PubMed Central

Gallo, Linda C.; Fortmann, Addie L.; McCurley, Jessica L.; Isasi, Carmen R.; Penedo, Frank J.; Daviglus, Martha L.; Roesch, Scott C.; Talavera, Gregory A.; Gouskova, Natalia; Gonzalez, Franklyn; Schneiderman, Neil; Carnethon, Mercedes R.

2015-01-01

Background Little research has examined associations of social support with diabetes (or other physical health outcomes) in Hispanics, who are at elevated risk. Purpose We examined associations between social support and diabetes prevalence in the Hispanic Community Health Study/Study of Latinos (HCHS/SOL) Sociocultural Ancillary Study. Methods Participants were 5181 adults, 18–74 years old, representing diverse Hispanic backgrounds, who underwent baseline exam with fasting blood draw, oral glucose tolerance test, medication review, sociodemographic assessment, and sociocultural exam with functional and structural social support measures. Results In adjusted analyses, one standard deviation higher structural and functional social support related to 16% and 15% lower odds, respectively, of having diabetes. Structural and functional support were related to both previously diagnosed diabetes (OR = .84 and .88, respectively) and newly recognized diabetes prevalence (OR = .84 and .83, respectively). Conclusions Higher functional and structural social support are associated with lower diabetes prevalence in Hispanics/Latinos. PMID:25107504

Advanced Layered Composite Polylaminate Electroactive Actuator and Sensor

NASA Technical Reports Server (NTRS)

Fox, Robert L. (Inventor); Hellbaum, Richard F. (Inventor); Copeland, Benjamin M., Jr. (Inventor); Bryant, Robert G. (Inventor)

2000-01-01

The present invention relates to the mounting of pre-stressed electroactive material in such a manner that large displacement actuators or sensors result. The invention comprises mounting the pre-stressed electroactive material to a support layer. This combination of a pre-stressed electroactive material and support layer may in turn be attached to a mounting surface. The pre-stressed electroactive material may be a ferroelectric, pyroelectric, piezoelectric, or magnetostrictive material. The size, stiffness, mass, and material of the support layer is selected to result in the electroactive device having dynamic response properties, environmental capability characteristics, and the required resilience optimized for a given application. The capacity to connect the support layer to a surface expands the arenas in which the prestressed electroactive device may be used. Application for which the invention may be used include actuators, sensors, or as a component in a pumps, switches, relays, pressure transducers and acoustic devices.

Public Support for Gun Violence Prevention Policies Among Gun Owners and Non-Gun Owners in 2017.

PubMed

Barry, Colleen L; Webster, Daniel W; Stone, Elizabeth; Crifasi, Cassandra K; Vernick, Jon S; McGinty, Emma E

2018-07-01

To compare public support for 24 different gun policies between gun owners and non-gun owners in 2017. We fielded a national public opinion survey in January 2017 using an online panel to measure US adults' support for 24 gun policies. We compared support among gun owners and non-gun owners. For 23 of the 24 policies examined, most respondents supported restricting or regulating gun ownership. Only 8 of 24 policies had greater than a 10-point support gap between gun owners and non-gun owners. Policies with high public support and minimal support gaps by gun ownership status included universal background checks, greater accountability for licensed gun dealers unable to account for their inventory, higher safety training standards for concealed carry permit holders, improved reporting of records related to mental illness for background checks, gun prohibitions for persons subject to temporary domestic violence restraining orders, and gun violence restraining orders. Public Health Implications. Although there are important areas where Americans disagree on guns, large majorities of both gun owners and non-gun owners strongly support measures to strengthen US gun laws.

10. VIEW TO NORTHEAST FROM WITHIN SOUTHWEST BAY, LOOKING THROUGH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. VIEW TO NORTHEAST FROM WITHIN SOUTHWEST BAY, LOOKING THROUGH CENTER BAY AND INTO NORTHEAST BAY. NOTE TRAVELING BRIDGE CRANE OVERHEAD AND SWINGING BOOM CRANES ATTACHED TO COLUMNS ON RIGHT AND LEFT. NOTE ALSO THE DIFFERENCE IN TRUSSES SUPPORTING CRANEWAY TRACKS FOR SIDE BAYS AND CENTER BAY. TRUSSES SUPPORTING CRANEWAY TRACKS IN SIDE BAYS (CENTER FOREGROUND AND FAR BACKGROUND) ARE HOWE TRUSSES WITH WOOD DIAGONALS AND STEEL VERTICALS. TRUSSES SUPPORTING CRANEWAY TRACKS IN CENTER BAY (MID BACKGROUND) ARE PRATT TRUSSES WITH WOOD VERTICALS AND DIAGONALS. - Rosie the Riveter National Historical Park, Auxiliary Plate Shop, 912 Harbour Way, Richmond, Contra Costa County, CA

Spirituality in Indian University Students and its Associations with Socioeconomic Status, Religious Background, Social Support, and Mental Health.

PubMed

Deb, Sibnath; McGirr, Kevin; Sun, Jiandong

2016-10-01

The present study aimed to understand spirituality and its relationships with socioeconomic status (SES), religious background, social support, and mental health among Indian university students. It was hypothesized that (1) female university students will be more spiritual than male university students, (2) four domains of spirituality will differ significantly across socioeconomic and religious background of the university students in addition to social support, and (3) there will be a positive relationship between spirituality and mental health of university students, irrespective of gender. A group of 475 postgraduate students aged 20-27 years, 241 males and 234 females, from various disciplines of Pondicherry University, India, participated in the study. Students' background was collected using a structured questionnaire. Overall spirituality and its four dimensions were measured using the Spirituality Attitude Inventory, while mental health status was estimated based on scores of the psychological subscale of the WHO Quality of Life Questionnaire. Female students were significantly more spiritual than male students, particularly in spiritual practice and sense of purpose/connection. Hindu religion and lower family income were associated with lower spirituality. Higher spirituality was associated with congenial family environment and more support from teachers and classmates. There was a strong association between overall spirituality and two spirituality domains (spiritual belief and sense of purpose/connection) with better mental health. Findings suggest an opportunity for open dialogue on spirituality for university students as part of their mental health and support services that fosters a positive mind set and enhancement of resilience.

Effectiveness of the use of question-driven levels of inquiry based instruction (QD-LOIBI) assisted visual multimedia supported teaching material on enhancing scientific explanation ability senior high school students

NASA Astrophysics Data System (ADS)

Suhandi, A.; Muslim; Samsudin, A.; Hermita, N.; Supriyatman

2018-05-01

In this study, the effectiveness of the use of Question-Driven Levels of Inquiry Based Instruction (QD-LOIBI) assisted visual multimedia supported teaching materials on enhancing senior high school students scientific explanation ability has been studied. QD-LOIBI was designed by following five-levels of inquiry proposed by Wenning. Visual multimedia used in teaching materials included image (photo), virtual simulation and video phenomena. QD-LOIBI assisted teaching materials supported by visual multimedia were tried out on senior high school students at one high school in one district in West Java. A quasi-experiment method with design one experiment group (n = 31) and one control group (n = 32) were used. Experimental group were given QD-LOIBI assisted teaching material supported by visual multimedia, whereas the control group were given QD-LOIBI assisted teaching materials not supported visual multimedia. Data on the ability of scientific explanation in both groups were collected by scientific explanation ability test in essay form concerning kinetic gas theory concept. The results showed that the number of students in the experimental class that has increased the category and quality of scientific explanation is greater than in the control class. These results indicate that the use of multimedia supported instructional materials developed for implementation of QD-LOIBI can improve students’ ability to provide explanations supported by scientific evidence gained from practicum activities and applicable concepts, laws, principles or theories.

Circles of Care: Implementation and Evaluation of Support Teams for African Americans with Cancer

ERIC Educational Resources Information Center

Hanson, Laura C.; Green, Melissa A.; Hayes, Michelle; Diehl, Sandra J.; Warnock, Steven; Corbie-Smith, Giselle; Lin, Feng-Chang; Earp, Jo Anne

2014-01-01

Background: Community-based peer support may help meet the practical, emotional, and spiritual needs of African Americans with advanced cancer. Support teams are a unique model of peer support for persons facing serious illness, but research is rare. This study sought to (a) implement new volunteer support teams for African Americans with advanced…

Achieving reversibility of ultra-high mechanical stress by hydrogen loading of thin films

NASA Astrophysics Data System (ADS)

Hamm, M.; Burlaka, V.; Wagner, S.; Pundt, A.

2015-06-01

Nano-materials are commonly stabilized by supports to maintain their desired shape and size. When these nano-materials take up interstitial atoms, this attachment to the support induces mechanical stresses. These stresses can be high when the support is rigid. High stress in the nano-material is typically released by delamination from the support or by the generation of defects, e.g., dislocations. As high mechanical stress can be beneficial for tuning the nano-materials properties, it is of general interest to deduce how real high mechanical stress can be gained. Here, we show that below a threshold nano-material size, dislocation formation can be completely suppressed and, when delamination is inhibited, even the ultrahigh stress values of the linear elastic limit can be reached. Specifically, for hydrogen solved in epitaxial niobium films on sapphire substrate supports a threshold film thickness of 6 nm was found and mechanical stress of up to (-10 ± 1) GPa was reached. This finding is of basic interest for hydrogen energy applications, as the hydride stability in metals itself is affected by mechanical stress. Thus, tuning of the mechanical stress-state in nano-materials may lead to improved storage properties of nano-sized materials.

Reporting of Navy Sponsor Owned Material Stored at the Naval Air Systems Command Activities

DTIC Science & Technology

2007-04-23

Who Should Read This Report and Why? Navy personnel responsible for reporting the amount and value of Sponsor Owned Material stored at Navy facilities should read this report. It discusses the financial reporting and control of Sponsor Owned Material stored by Naval Air Systems Command activities. Background. The Department of the Navy reported $58.8 billion of Operating Materials and Supplies on its first quarter FY 2006 financial statements. This included a sub-category of supplies and materials termed Sponsor Owned Material. The Navy defines Sponsor

Perceived organizational support and job involvement in the Iranian health care system: A case study of emergency room nurses in general hospitals

PubMed Central

Gorji, Hassan Abolghasem; Etemadi, Manal; Hoseini, Fatemeh

2014-01-01

Background and Objectives: Researchers believe that there are social exchanges between the employers and employees, because the employees would be interested in their organization and trust it based on how the organization values them and their welfare, comfort, and security. This belief is known as perceived organizational support that makes employees consider themselves as a part of their organization and have a commitment to it. The literature review is very limited in both variables in Iran and thus few studies also report the perceived organizational support and job involvement at the lower levels in our country. This research aimed at studying the levels of perceived organizational support and job involvement, relationship between this two, and the demographic factors relationship with both of them. Materials and Methods: This research was a descriptive analytical study conducted in 2012. The population included 123 emergency nurses in General Hospitals of Qom. Data were collected through Perceived Organizational Support and Job Involvement Questionnaires and analyzed using SPSS software, descriptive statistics and Spearman correlation and Chi-square test. Results: Both mean scores for perceived organizational support and job involvement were in average level, 146/12 and 35/38, respectively. There was a significant relationship between perceived organizational support and age, education, tenure, organizational position, and job shift. There was also a significant relationship between job involvement and age and education and finally between perceived organizational support and job involvement (P = 0/029). Discussion: The high correlation between perceived organizational support and job involvement indicates that the improvement of perceived organizational support are necessary through motivating the employees, showing interest in them, paying attention to them, respecting them, and providing development opportunity in the organization. These should be always considered by managers to improve job involvement PMID:25077151

Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liby, Alan L; Rogers, Hiram

The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work onmore » advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.« less

Materials Test Branch

NASA Technical Reports Server (NTRS)

Gordon, Gail

2012-01-01

The Materials Test Branch resides at Marshall Space Flight Center's Materials and Processing laboratory and has a long history of supporting NASA programs from Mercury to the recently retired Space Shuttle. The Materials Test Branch supports its customers by supplying materials testing expertise in a wide range of applications. The Materials Test Branch is divided into three Teams, The Chemistry Team, The Tribology Team and the Mechanical Test Team. Our mission and goal is to provide world-class engineering excellence in materials testing with a special emphasis on customer service.

Novel air electrode for metal-air battery with new carbon material and method of making same

DOEpatents

Ross, Jr., Philip N.

1990-01-01

A novel carbonaceous electrode support material is disclosed characterized by a corrosion rate of 0.03 wt. %/hour or less when measured a5 550 millivolts vs. a Hg/HgO electrode in a 30 wt. % KOH electrolyte a5 30.degree. C. The electrode support material comprises a preselected carbon black material which has been heat-treated by heating the material to a temperature of from about 2500.degree. to about 3000.degree. C. over a period of from about 1 to about 5 hours in an inert atmosphere and then maintaining the preselected carbon black material at this temperature for a period of at least about 1 hour, and preferably about 2 hours, in the inert atmosphere. A carbonaceous electrode suitable for use as an air electrode in a metal-air cell may be made from the electrode support material by shaping and forming it into a catalyst support and then impregnating it with a catalytically active material capable of catalyzing the reaction with oxygen at the air electrode of metal-air cell.

Carnivorous Plants.

ERIC Educational Resources Information Center

Canipe, Stephen

This biology lesson on carnivorous (insectivorous) plants is designed to supplement the textbook in the areas of plant diversity, ecology, and distribution. An introduction provides general background information for use as lecture material by the teacher or as reading and/or study material for students. The introduction also includes…

BIBLIOGRAPHY ON ACHIEVEMENT.

ERIC Educational Resources Information Center

Harvard Univ., Cambridge, MA. Graduate School of Education.

THIS BIBLIOGRAPHY LISTS MATERIAL ON VARIOUS ASPECTS OF ACHIEVEMENT. APPROXIMATELY 40 UNANNOTATED REFERENCES ARE PROVIDED TO DOCUMENTS DATING FROM 1952 TO 1965. JOURNALS, BOOKS, AND REPORT MATERIALS ARE LISTED. SUBJECT AREAS INCLUDED ARE BEHAVIOR TESTS, ACHIEVEMENT BEHAVIOR, ACADEMIC ACHIEVEMENT, AND SOCIAL-CLASS BACKGROUND. A RELATED REPORT IS ED…

Polyol and Amino Acid-Based Biosurfactants, Builders, and Hydrogels

USDA-ARS?s Scientific Manuscript database

This chapter reviews different detergent materials which have been synthesized from natural agricultural commodities. Background information, which gives reasons why the use of biobased materials may be advantageous, is presented. Detergent builders from L-aspartic acid, citric acid and D-sorbitol...

Recognized Leader in Electrochemical Purification

ScienceCinema

Hoppe, Eric

2018-01-16

PNNL scientists developed an electrochemical method for purifying copper, a key material that makes possible radiation detection systems of unprecedented sensitivity. The method begins with the purest copper materials available, and results in the lowest-background copper in the world. Chemist Eric Hoppe explains the process.

Reaching for the Stars.

ERIC Educational Resources Information Center

Nature Scope, 1986

1986-01-01

Provides: (1) background information on the space program, space issues and problems, and the search for extraterrestrial life; (2) five activities; and (3) ready-to-duplicate student materials. Activities include objective(s), recommended age level(s), subject area(s), list of materials needed, and procedures. (JN)

Nitrogen-doped carbon-supported cobalt-iron oxygen reduction catalyst

DOEpatents

Zelenay, Piotr; Wu, Gang

2014-04-29

A Fe--Co hybrid catalyst for oxygen reaction reduction was prepared by a two part process. The first part involves reacting an ethyleneamine with a cobalt-containing precursor to form a cobalt-containing complex, combining the cobalt-containing complex with an electroconductive carbon supporting material, heating the cobalt-containing complex and carbon supporting material under conditions suitable to convert the cobalt-containing complex and carbon supporting material into a cobalt-containing catalyst support. The second part of the process involves polymerizing an aniline in the presence of said cobalt-containing catalyst support and an iron-containing compound under conditions suitable to form a supported, cobalt-containing, iron-bound polyaniline species, and subjecting said supported, cobalt-containing, iron bound polyaniline species to conditions suitable for producing a Fe--Co hybrid catalyst.

Catalyst containing oxygen transport membrane

DOEpatents

Lane, Jonathan A.; Wilson, Jamie R.; Christie, Gervase Maxwell; Petigny, Nathalie; Sarantopoulos, Christos

2017-02-07

A composite oxygen transport membrane having a dense layer, a porous support layer and an intermediate porous layer located between the dense layer and the porous support layer. Both the dense layer and the intermediate porous layer are formed from an ionic conductive material to conduct oxygen ions and an electrically conductive material to conduct electrons. The porous support layer has a high permeability, high porosity, and a microstructure exhibiting substantially uniform pore size distribution as a result of using PMMA pore forming materials or a bi-modal particle size distribution of the porous support layer materials. Catalyst particles selected to promote oxidation of a combustible substance are located in the intermediate porous layer and in the porous support adjacent to the intermediate porous layer. The catalyst particles can be formed by wicking a solution of catalyst precursors through the porous support toward the intermediate porous layer.

Corrosion-resistant catalyst supports for phosphoric acid fuel cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kosek, J.A.; Cropley, C.C.; LaConti, A.B.

High-surface-area carbon blacks such as Vulcan XC-72 (Cabot Corp.) and graphitized carbon blacks such as 2700{degree}C heat-treated Black Pearls 2000 (HTBP) (Cabot Corp.) have found widespread applications as catalyst supports in phosphoric acid fuel cells (PAFCs). However, due to the operating temperatures and pressures being utilized in PAFCs currently under development, the carbon-based cathode catalyst supports suffer from corrosion, which decreases the performance and life span of a PAFC stack. The feasibility of using alternative, low-cost, corrosion-resistant catalyst support (CRCS) materials as replacements for the cathode carbon support materials was investigated. The objectives of the program were to prepare high-surface-areamore » alternative supports and to evaluate the physical characteristics and the electrochemical stability of these materials. The O{sub 2} reduction activity of the platinized CRCS materials was also evaluated. 2 refs., 3 figs.« less

3D printing PLA and silicone elastomer structures with sugar solution support material

NASA Astrophysics Data System (ADS)

Hamidi, Armita; Jain, Shrenik; Tadesse, Yonas

2017-04-01

3D printing technology has been used for rapid prototyping since 1980's and is still developing in a way that can be used for customized products with complex design and miniature features. Among all the available 3D printing techniques, Fused Deposition Modeling (FDM) is one of the most widely used technologies because of its capability to build different structures by employing various materials. However, complexity of parts made by FDM is greatly limited by restriction of using support materials. Support materials are often used in FDM for several complex geometries such as fully suspended shapes, overhanging surfaces and hollow features. This paper describes an approach to 3D print a structure using silicone elastomer and polylactide fiber (PLA) by employing a novel support material that is soluble in water. This support material is melted sugar which can easily be prepared at a low cost. Sugar is a carbohydrate, which is found naturally in plants such as sugarcane and sugar beets; therefore, it is completely organic and eco-friendly. As another advantage, the time for removing this material from the part is considerably less than other commercially available support materials and it can be removed easily by warm water without leaving any trace. Experiments were done using an inexpensive desktop 3D printer to fabricate complex structures for use in soft robots. The results envision that further development of this system would contribute to a method of fabrication of complex parts with lower cost yet high quality.

Development of a model of dementia support and pathway for culturally and linguistically diverse communities using co-creation and participatory action research

PubMed Central

Goeman, Dianne; King, Jordan; Koch, Susan

2016-01-01

Objective To develop an inclusive model of culturally sensitive support, using a specialist dementia nurse (SDN), to assist people with dementia from culturally and linguistically diverse (CALD) communities and their carers to overcome barriers to accessing health and social care services. Design Co-creation and participatory action research, based on reflection, data collection, interaction and feedback from participants and stakeholders. Setting An SDN support model embedded within a home nursing service in Melbourne, Australia was implemented between October 2013 and October 2015. Participants People experiencing memory loss or with a diagnosis of dementia from CALD backgrounds and their carers and family living in the community setting and expert stakeholders. Data collection and analysis Reflections from the SDN on interactions with participants and expert stakeholder opinion informed the CALD dementia support model and pathway. Results Interaction with 62 people living with memory loss or dementia from CALD backgrounds, carers or family members receiving support from the SDN and feedback from 13 expert stakeholders from community aged-care services, consumer advocacy organisations and ethnic community group representatives informed the development and refinement of the CALD dementia model of care and pathway. We delineate the three components of the ‘SDN’ model: the organisational support; a description of the role; and the competencies needed. Additionally, we provide an accompanying pathway for use by health professionals delivering care to consumers with dementia from CALD backgrounds. Conclusions Our culturally sensitive model of dementia care and accompanying pathway allows for the tailoring of health and social support to assist people from CALD backgrounds, their carers and families to adjust to living with memory loss and remain living in the community as long as possible. The model and accompanying pathway also have the potential to be rolled out nationally for use by health professionals across a variety of health services. PMID:27927662

Passive Sensor Materials Based on Liquid Crystals

DTIC Science & Technology

2011-03-12

REPORT Passive Sensor Materials based on Liquid Crystals 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: Research supported by this grant entitled “Passive...Sensor Materials Based on Liquid Crystals” revolved around an investigation of liquid crystalline materials for use in passive sensors for chemical... based on Liquid Crystals Report Title ABSTRACT Research supported by this grant entitled “Passive Sensor Materials Based on Liquid Crystals” revolved

Microfossils from the Local Marine Environment. A Learning Experience for Coastal and Oceanic Awareness Studies, No. 219. [Project COAST].

ERIC Educational Resources Information Center

Delaware Univ., Newark. Coll. of Education.

This unit on fossils is designed for junior high school students. Students collect a sediment sample, process the sample, and examine it for microfossils. The scientific classification and naming of microfossils is not stressed. Included in the materials are evaluation items, background materials for teachers, lists of needed materials, vocabulary…

Exploring the role of curriculum materials to support teachers in science education reform

NASA Astrophysics Data System (ADS)

Schneider, Rebecca M.

2001-07-01

For curriculum materials to succeed in promoting large-scale science education reform, teacher learning must be supported. Materials were designed to reflect desired reforms and to be educative by including detailed lesson descriptions that addressed necessary content, pedagogy, and pedagogical content knowledge for teachers. The goal of this research was to describe how such materials contributed to classroom practices. As part of an urban systemic reform effort, four middle school teachers' initial enactment of an inquiry-based science unit on force and motion were videotaped. Enactments focused on five lesson sequences containing experiences with phenomena, investigation, technology use, or artifact development. Each sequence spanned three to five days across the 10-week unit. For each lesson sequence, intended and actual enactment were compared using ratings of (1) accuracy and completeness of science ideas presented, (2) amount student learning opportunities, similarity of learning opportunities with those intended, and quality of adaptations , and (3) amount of instructional supports offered, appropriateness of instructional supports and source of ideas for instructional supports. Ratings indicated two teachers' enactments were consistent with intentions and two teachers' enactments were not. The first two were in school contexts supportive of the reform. They purposefully used the materials to guide enactment, which tended to be consistent with standards-based reform. They provided students opportunities to use technology tools, design investigations, and discuss ideas. However, enactment ratings were less reflective of curriculum intent when challenges were greatest, such as when teachers attempted to present challenging science ideas, respond to students' ideas, structure investigations, guide small-group discussions, or make adaptations. Moreover, enactment ratings were less consistent in parts of lessons where materials did not include lesson specific educative supports for teachers. Overall, findings indicate curriculum materials that include detailed descriptions of lessons accompanied by educative features can help teachers with enactment. Therefore, design principles to improve materials to support teachers in reform are suggested. However, results also demonstrate materials alone are not sufficient to create intended enactments; reform efforts must include professional development in content and pedagogy and efforts to create systemic change in context and policy to support teacher learning and classroom enactment.

The effect of background galaxy contamination on the absolute magnitude and light curve speed class of type Ia supernovae

NASA Technical Reports Server (NTRS)

Boisseau, John R.; Wheeler, J. Craig

1991-01-01

Observational data are presented in support of the hypothesis that background galaxy contamination is present in the photometric data of Ia supernovae and that this effect can account for the observed dispersion in the light curve speeds of most of Ia supernovae. The implication is that the observed dispersion in beta is artificial and that most of Ia supernovae have nearly homogeneous light curves. The result supports the notion that Ia supernovae are good standard candles.

Mitigation of hard x-ray background in backlit pinhole imagers

DOE PAGES

Fein, J. R.; Keiter, P. A.; Holloway, J. P.; ...

2016-09-16

Experiments were performed to mitigate the hard x-ray background commonly observed in backlit pinhole imagers. The material of the scaffold holding the primary backlighter foil was varied to reduce the laser-plasma instabilities responsible for hot electrons and resulting hard x-ray background. Radiographic measurements with image plates showed a factor of >25 decrease in x-rays between 30 and 67 keV when going from a plastic to Al or V scaffold. Here, a potential design using V scaffold offers a signal-to-background ratio of 6:1, a factor of 2 greater than using the bare plastic scaffold.

38 CFR 62.22 - Scoring criteria for supportive services grant applicants.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for Veteran Families Program. (3) Organizational qualifications and past performance. (i) Applicant... background, qualifications, experience, and past performance, of the applicant, and any subcontractors...: (1) Background and organizational history. (i) Applicant's, and any identified subcontractors...

Genetic continuity across a deeply divergent linguistic contact zone in North Maluku, Indonesia

PubMed Central

2011-01-01

Background The islands of North Maluku, Indonesia occupy a central position in the major prehistoric dispersal streams that shaped the peoples of Island Southeast Asia and the Pacific. Within this region a linguistic contact zone exists where speakers of Papuan and Austronesian languages reside in close proximity. Here we use population genetic data to assess the extent to which North Maluku populations experienced admixture of Asian genetic material, and whether linguistic boundaries reflect genetic differentiation today. Results Autosomal and X-linked markers reveal overall Asian admixture of 67% in North Maluku, demonstrating a substantial contribution of genetic material into the region from Asia. We observe no evidence of population structure associated with ethnicity or language affiliation. Conclusions Our data support a model of widespread Asian admixture in North Maluku, likely mediated by the expansion of Austronesian-speaking peoples into the region during the mid Holocene. In North Maluku there is no genetic differentiation in terms of Austronesian- versus Papuan-speakers, suggesting extensive gene flow across linguistic boundaries. In a regional context, our results illuminate a major genetic divide at the Molucca Sea, between the islands of Sulawesi and North Maluku. West of this divide, populations exhibit predominantly Asian ancestry, with very little contribution of Papuan genetic material. East of the Molucca Sea, populations show diminished rates of Asian admixture and substantial persistence of Papuan genetic diversity. PMID:22098696

Evidence-based practice: extending the search to find material for the systematic review

PubMed Central

Helmer, Diane; Savoie, Isabelle; Green, Carolyn; Kazanjian, Arminée

2001-01-01

Background: Cochrane-style systematic reviews increasingly require the participation of librarians. Guidelines on the appropriate search strategy to use for systematic reviews have been proposed. However, research evidence supporting these recommendations is limited. Objective: This study investigates the effectiveness of various systematic search methods used to uncover randomized controlled trials (RCTs) for systematic reviews. Effectiveness is defined as the proportion of relevant material uncovered for the systematic review using extended systematic review search methods. The following extended systematic search methods are evaluated: searching subject-specific or specialized databases (including trial registries), hand searching, scanning reference lists, and communicating personally. Methods: Two systematic review projects were prospectively monitored regarding the method used to identify items as well as the type of items retrieved. The proportion of RCTs identified by each systematic search method was calculated. Results: The extended systematic search methods uncovered 29.2% of all items retrieved for the systematic reviews. The search of specialized databases was the most effective method, followed by scanning of reference lists, communicating personally, and hand searching. Although the number of items identified through hand searching was small, these unique items would otherwise have been missed. Conclusions: Extended systematic search methods are effective tools for uncovering material for the systematic review. The quality of the items uncovered has yet to be assessed and will be key in evaluating the value of the systematic search methods. PMID:11837256

Effects of a classroom intervention with spatial play materials on children's object and viewer transformation abilities.

PubMed

Vander Heyden, Karin M; Huizinga, Mariette; Jolles, Jelle

2017-02-01

Children practice their spatial skills when playing with spatial toys, such as construction materials, board games, and puzzles. Sex and SES differences are observed in the engagement in such spatial play activities at home, which relate to individual differences in spatial performance. The current study investigated the effects of explicitly providing spatial play activities in the school setting on different types of spatial ability. We presented 8- to 10-year-old children with a short and easy-to-adopt classroom intervention comprising a set of different spatial play materials. The design involved a pretest-posttest comparison between the intervention group (n = 70) and a control group without intervention (n = 70). Effects were examined on object transformation ability (i.e., a paper-and-pencil mental rotation and paper folding task) and viewer transformation ability (i.e., a hands-on 3D spatial perspective-taking task). Results showed specific effects: there were no differences between the intervention and control group in progress on the two object transformation tasks. Substantial improvements were found for the intervention group compared to the control group on the viewer transformation task. Training progress was not related to sex and socioeconomic background of the child. These findings support the value of spatial play in the classroom for the spatial development of children between 8 and 10 years of age. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

ADM guidance-Ceramics: guidance to the use of fractography in failure analysis of brittle materials.

PubMed

Scherrer, Susanne S; Lohbauer, Ulrich; Della Bona, Alvaro; Vichi, Alessandro; Tholey, Michael J; Kelly, J Robert; van Noort, Richard; Cesar, Paulo Francisco

2017-06-01

To provide background information and guidance as to how to use fractography accurately, a powerful tool for failure analysis of dental ceramic structures. An extended palette of qualitative and quantitative fractography is provided, both for in vivo and in vitro fracture surface analyses. As visual support, this guidance document will provide micrographs of typical critical ceramic processing flaws, differentiating between pre- versus post sintering cracks, grinding damage related failures and occlusal contact wear origins and of failures due to surface degradation. The documentation emphasizes good labeling of crack features, precise indication of the direction of crack propagation (dcp), identification of the fracture origin, the use of fractographic photomontage of critical flaws or flaw labeling on strength data graphics. A compilation of recommendations for specific applications of fractography in Dentistry is also provided. This guidance document will contribute to a more accurate use of fractography and help researchers to better identify, describe and understand the causes of failure, for both clinical and laboratory-scale situations. If adequately performed at a large scale, fractography will assist in optimizing the methods of processing and designing of restorative materials and components. Clinical failures may be better understood and consequently reduced by sending out the correct message regarding the fracture origin in clinical trials. Copyright © 2017 The Academy of Dental Materials. All rights reserved.

Photocatalytic methods for preparation of electrocatalyst materials

DOEpatents

Li, Wen; Kawamura, Tetsuo; Nagami, Tetsuo; Takahashi, Hiroaki; Muldoon, John; Shelnutt, John A; Song, Yujiang; Miller, James E; Hickner, Michael A; Medforth, Craig

2013-09-24

The invention relates to methods of preparing metal particles on a support material, including platinum-containing nanoparticles on a carbon support. Such materials can be used as electrocatalysts, for example as improved electrocatalysts in polymer electrolyte membrane fuel cells (PEM-FCs).

Photocatalytic methods for preparation of electrocatalyst materials

DOEpatents

Nwoga, Tochi Tudor; Kawahara, Kazuo; Li, Wen; Song, Yujiang; Shelnutt, John A; Miller, James E; Medforth, Craig John; Ueno, Yukiyoshi; Kawamura, Tetsuo

2013-12-17

The invention relates to methods of preparing metal particles on a support material, including platinum-containing nanoparticles on a carbon support. Such materials can be used as electrocatalysts, for example as improved electrocatalysts in proton exchange membrane fuel cells (PEM-FCs).

Nonfiction Readers Theatre for Beginning Readers

ERIC Educational Resources Information Center

Fredericks, Anthony D.

2007-01-01

Test scores across the country show American students are far more able to read narrative than nonfiction text. Some research speculates this is due to a great lack in the background knowledge of many children. Librarians are beginning to realize that a unique fit for the school librarian is as a provider of background knowledge materials for…

Whose Music? Diversity in a First-Year Foundation Course

ERIC Educational Resources Information Center

Wells, Elizabeth A.

2009-01-01

Students come to university with diverse tastes, experiences, and backgrounds, yet we often want them to embrace a body of aesthetics, philosophies, and ideologies that reflect the material we and our established disciplines value as central. However, by using their own backgrounds as a basis for exploration, discovery, and sharing, students can…

The Byrne Guide for Inclusionary Cultural Content.

PubMed

Byrne, Michelle M; Weddle, Carriette; Davis, Ernestine; McGinnis, Patricia

2003-06-01

This article describes the background for development of The Byrne Guide for Inclusionary Cultural Content, which may help nurse educators evaluate and create instructional materials that include diverse groups. Curricular implications of diversity, as well as six categories of instructional bias are included in the background of information that contributed to the development of this Guide.

Important Trends for California Community Colleges, 1992 Update. Background Data.

ERIC Educational Resources Information Center

California Community Colleges, Sacramento. Office of the Chancellor.

Designed to serve as background material for the development of the Board of Governors of the California Community Colleges' 1992-93 basic agenda, this report examines several statewide trends affecting community colleges. Data presented in the report supersede papers prepared for previous Board retreats. Among the trends examined are those…

Schema Theory: Teaching U.S. History to Beginning Amnesty Students.

ERIC Educational Resources Information Center

Chervenick, Ellen Cecelia

In order to study for citizenship tests, amnesty students need to be able to read U.S. history material, although they usually have no background knowledge for it. According to schema theory, background knowledge is important for reading comprehension. Research has shown significant improvement in the reading comprehension of intermediate level…

Neutronics Studies for the Nab Experiment

NASA Astrophysics Data System (ADS)

Scott, Elizabeth; Nab Collaboration

2017-09-01

The Nab experiment at the Spallation Neutron Source at ORNL aims to measure the neutron beta decay electron-neutrino correlation coefficient ``a'' and the Fierz interference term ``b'' with competitive precision. In Nab, the parameter ``a'' is extracted from the proton momentum and electron energy using an asymmetric magnetic spectrometer and two large-area highly pixelated Si detectors . To achieve 10-3 accuracy, there must be low background rates compared to our 1 kHz signal rates. The background is primarily reduced by using coincidence detection of the electron and photon from the decay. However, further reduction is still necessary. Neutron and gamma rates in the Si detectors can lead to false coincidences. The majority of this background radiation can be reduced by well designed collimation and shielding. The collimation design was done with McStas and the background shielding with MCNP6 (Monte Carlo N-Particle 6). Neutrons are absorbed by 6Li -loaded materials or borated polyethylene and gammas close to spectrometer with non magnetic materials such as lead and stainless steel. I will present the shielding design and MCNP6 results.

A Planetary Defense Gateway for Smart Discovery of relevant Information for Decision Support

NASA Technical Reports Server (NTRS)

Bambacus, Myra; Yang, Chaowei Phil; Leung, Ronald Y.; Barbee, Brent; Nuth, Joseph A.; Seery, Bernard; Jiang, Yongyao; Qin, Han; Li, Yun; Yu, Manzhu;

I-CAN: The Classification and Prediction of Support Needs

ERIC Educational Resources Information Center

Arnold, Samuel R. C.; Riches, Vivienne C.; Stancliffe, Roger J.

2014-01-01

Background: Since 1992, the diagnosis and classification of intellectual disability has been dependent upon three constructs: intelligence, adaptive behaviour and support needs (Luckasson "et al." 1992. Mental Retardation: Definition, Classification and Systems of Support. American Association on Intellectual and Developmental…

The Impact of Emotional and Material Social Support on Women's Drug Treatment Completion

ERIC Educational Resources Information Center

Lewandowski, Cathleen A.; Hill, Twyla J.

2009-01-01

This study assessed how women's perceptions of emotional and material social support affect their completion of residential drug treatment. Although previous research has examined how social support affects recovery, few studies, if any, have examined both the types and the sources of social support. The study hypothesized that women's perceptions…

The effect of values and culture on life-support decisions.

PubMed Central

Klessig, J

1992-01-01

Withdrawing life support is always difficult. When patients and health professionals are from different ethnic backgrounds, value systems that form the basis for such decisions may conflict. Many cultural groups do not place the same emphasis on patient autonomy and self-determination that Western society does and find the idea of terminating life support offensive. Although physicians should never assume patients will respond in a particular way because of their ethnic background, issues of life support should be discussed in a culturally sensitive way. African-American, Chinese, Jewish, Iranian, Filipino, Mexican-American, and Korean patients were surveyed about their views on life support. The findings reported here, although not meant to be definitive, should add to health professionals' understanding about diverse beliefs around life-and-death issues. By becoming aware of this diversity of beliefs, health professionals can avoid the damage to the physician-patient relationship caused by conflicting value systems. PMID:1413777

Supporting People with Intellectual and Developmental Disabilities to Participate in Their Communities through Support Staff Pilot Intervention

ERIC Educational Resources Information Center

Zakrajsek, Andrea Gossett; Hammel, Joy; Scazzero, Joseph A.

2014-01-01

Background: Increasingly, people with intellectual and developmental disabilities (I/DD) are supported to participate in least-restricted settings in the community. However, little is known about desired community participation choice and control of people with I/DD, nor effective strategies to support full participation. Furthermore, service…

Support for Offering Sexual Health Services through School-Based Health Clinics

ERIC Educational Resources Information Center

Moore, Michele Johnson; Barr, Elissa; Wilson, Kristina; Griner, Stacey

2016-01-01

Background: Numerous studies document support for sexuality education in the schools. However, there is a dearth of research assessing support for sexual health services offered through school-based health clinics (SBHCs). The purpose of this study was to assess voter support for offering 3 sexual health services (STI/HIV testing, STI/HIV…

Building Your Program. Supported Education: A Promising Practice. Evidence-Based Practices KIT (Knowledge Informing Transformation)

ERIC Educational Resources Information Center

Unger, Karen V.

2011-01-01

"Building Your Program" is intended to help mental health authorities, agency administrators, and program leaders think through and develop Supported Education. The first part of this booklet gives you background information about the Supported Education model. Specific information about your role in implementing and sustaining Supported Education…

Work and Life Balance Support of Female Midlevel Noninstructional Staff at Community Colleges

ERIC Educational Resources Information Center

Jones, Stephanie J.; Taylor, Colette M.

2013-01-01

Two-year public institutions are known for their nurturing academic environments that support students from diverse backgrounds and experiences. One would assume that these nurturing and supportive environments would also go beyond the students to include employees. Family-friendly working environments support the needs of employees to balance…

The quick and ultrasensitive determination of K in NaI using inductively coupled plasma mass spectrometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnquist, Isaac J.; Hoppe, Eric W.

A highly sensitive, novel and quick assay method utilizing inductively coupled plasma mass spectrometry was developed for the determination of K in NaI powders and NaI(Tl) scintillator crystals for use in ultralow background applications. The determination of K (viz. 40K), as well as Th and U and their daughters, is important in ultralow background detector materials to ensure incorporation of materials of sufficiently high radiopurity. Through the use of improved instrumentation, cool plasma operating conditions, and meticulously clean sample preparations, detection limits of 11 fg natK∙g-1 (or 341 pBq 40K∙kg-1) was attained for K in pure water. Detection limits inmore » the sample matrix (i.e., NaI) were 0.529 ng natK∙g NaI-1 (or 16.4 Bq 40K∙kg NaI -1). A number of different precursor NaI powder samples and NaI(Tl) scintillator crystals were assayed for their K content. Determinations ranged from 0.757 – 31.4 ng natK∙g NaI-1. This method allows for the screening of materials to unprecedented levels in a fraction of the time compared to gamma counting techniques, providing a useful method for a more effective screening tool of K in ultralow background detector materials.« less

"Dinosaurs." Kindergarten. Anchorage School District Elementary Science Program.

ERIC Educational Resources Information Center

Herminghaus, Trisha, Ed.

This unit contains 15 lessons on dinosaurs for kindergarten children. It provides a materials list, supplementary materials list, use of process skill terminology, unit objectives, vocabulary, six major dinosaurs, and background information. Lessons are: (1) "Webbing"; (2) "Introduction to the Big Six"; (3) "Paleontology…

75 FR 56972 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts... Factors AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION: Notice of...: Background There are roughly 170,000 miles of hazardous liquid pipelines, 295,000 miles of gas transmission...

Afro-Americans: Resource Material.

ERIC Educational Resources Information Center

Henson, Valeria B.; And Others

This resource guide lists activities and materials that can be used by teachers to provide students with information about the historical background and cultural heritage of Afro-Americans. Specific teaching strategies, learning activities, and informational readings are provided for the following topics: (1) prominent black Americans; (2) African…

The Korean War: An ERIC/ChESS Sample.

ERIC Educational Resources Information Center

Pinhey, Laura A.

2000-01-01

Provides a list of teaching materials and general background documents about the Korean War from the ERIC database. Offers directions for obtaining the full text of materials about the division of South and North Korea, the geography of Korea, and South Korea's economic development. (CMK)

Prevention of Child Accidents at Home.

ERIC Educational Resources Information Center

International Children's Centre, Paris (France).

In three languages, Spanish, French and English, these materials provide facts, background information and guides for preventing accidental harm to children. The materials, organized in three identical packets consisting of four pamphlets, offer information for mass media specialists, guidelines for administrators and decision makers, a technical…

Bio-Inspired Bright Structurally Colored Colloidal Amorphous Array Enhanced by Controlling Thickness and Black Background.

PubMed

Iwata, Masanori; Teshima, Midori; Seki, Takahiro; Yoshioka, Shinya; Takeoka, Yukikazu

2017-07-01

Inspired by Steller's jay, which displays angle-independent structural colors, angle-independent structurally colored materials are created, which are composed of amorphous arrays of submicrometer-sized fine spherical silica colloidal particles. When the colloidal amorphous arrays are thick, they do not appear colorful but almost white. However, the saturation of the structural color can be increased by (i) appropriately controlling the thickness of the array and (ii) placing the black background substrate. This is similar in the case of the blue feather of Steller's jay. Based on the knowledge gained through the biomimicry of structural colored materials, colloidal amorphous arrays on the surface of a black particle as the core particle are also prepared as colorful photonic pigments. Moreover, a structural color on-off system is successfully built by controlling the background brightness of the colloidal amorphous arrays. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of ELMs on deuterium-loaded-tungsten plasma facing components

NASA Astrophysics Data System (ADS)

Umstadter, K. R.; Rudakov, D. L.; Wampler, W.; Watkins, J. G.; Wong, C. P. C.

2011-08-01

Prior heat pulse testing of plasma facing components (PFCs) has been completed in vacuum environments without the presence of background plasma. Edge localized modes (ELMs) will not be this kind of isolated event and one should know the effect of a plasma background during these transients. Heat-pulse experiments have been conducted in the PISCES-A device utilizing laser heating in a divertor-like plasma background. Initial results indicate that the erosion of PFCs is enhanced as compared to heat pulse or plasma only tests. To determine if the enhanced erosion effect is a phenomena only witnessed in the laboratory PISCES device, tungsten and graphite samples were exposed to plasmas in the lower divertor of the DIII-D tokamak using the Divertor Material Evaluation System (DiMES). Mass loss analysis indicates that materials that contain significant deuterium prior to experiencing a transient heating event will erode faster than those that have no or little retained deuterium.

Apparatus having reduced background for measuring radiation activity in aerosol particles

DOEpatents

Rodgers, John C.; McFarland, Andrew R.; Oritz, Carlos A.; Marlow, William H.

1992-01-01

Apparatus having reduced background for measuring radiation activity in aerosol particles. A continuous air monitoring sampler is described for use in detecting the presence of alpha-emitting aerosol particles. An inlet fractionating screen has been demonstrated to remove about 95% of freshly formed radon progeny from the aerosol sample, and approximately 33% of partially aged progeny. Addition of an electrical condenser and a modified dichotomous virtual impactor are expected to produce considerable improvement in these numbers, the goal being to enrich the transuranic (TRU) fraction of the aerosols. This offers the possibility of improving the signal-to-noise ratio for the detected alpha-particle energy spectrum in the region of interest for detecting TRU materials associated with aerosols, thereby enhancing the performance of background-compensation algorithms for improving the quality of alarm signals intended to warn personnel of potentially harmful quantities of TRU materials in the ambient air.

Lowering the radioactivity of the photomultiplier tubes for the XENON1T dark matter experiment

DOE PAGES

Aprile, E.; Agostini, F.; Alfonsi, M.; ...

2015-11-23

The low-background, VUV-sensitive 3-inch diameter photomultiplier tube R11410 has been developed by Hamamatsu for dark matter direct detection experiments using liquid xenon as the target material. We present the results from the joint effort between the XENON collaboration and the Hamamatsu company to produce a highly radio-pure photosensor (version R11410-21) for the XENON1T dark matter experiment. After introducing the photosensor and its components, we show the methods and results of the radioactive contamination measurements of the individual materials employed in the photomultiplier production. We then discuss the adopted strategies to reduce the radioactivity of the various PMT versions. Finally, wemore » detail the results from screening 286 tubes with ultra-low background germanium detectors, as well as their implications for the expected electronic and nuclear recoil background of the XENON1T experiment.« less

Radioactivities of Long Duration Exposure Facility (LDEF) materials: Baggage and bonanzas

NASA Technical Reports Server (NTRS)

Smith, Alan R.; Hurley, Donna L.

1991-01-01

Radioactivities in materials onboard the returned Long Duration Exposure Facility (LDEF) satellite were studied by a variety of techniques. Among the most powerful is low background Ge semiconductor detector gamma ray spectrometry. The observed radioactivities are of two origins: those radionuclides produced by nuclear reactions with the radiation field in orbit and radionuclides present initially as contaminants in materials used for construction of the spacecraft and experimental assemblies. In the first category are experiment related monitor foils and tomato seeds, and such spacecraft materials as Al, stainless steel, and Ti. In the second category are Al, Be, Ti, Va, and some special glasses. Consider that measured peak-area count rates from both categories range from a high value of about 1 count per minute down to less than 0.001 count per minute. Successful measurement of count rates toward the low end of this range can be achieved only through low background techniques, such as used to obtain the results presented here.

Radioactivities of Long Duration Exposure Facility (LDEF) materials: Baggage and bonanzas

NASA Astrophysics Data System (ADS)

Smith, Alan R.; Hurley, Donna L.

1991-06-01

Radioactivities in materials onboard the returned Long Duration Exposure Facility (LDEF) satellite were studied by a variety of techniques. Among the most powerful is low background Ge semiconductor detector gamma ray spectrometry. The observed radioactivities are of two origins: those radionuclides produced by nuclear reactions with the radiation field in orbit and radionuclides present initially as contaminants in materials used for construction of the spacecraft and experimental assemblies. In the first category are experiment related monitor foils and tomato seeds, and such spacecraft materials as Al, stainless steel, and Ti. In the second category are Al, Be, Ti, Va, and some special glasses. Consider that measured peak-area count rates from both categories range from a high value of about 1 count per minute down to less than 0.001 count per minute. Successful measurement of count rates toward the low end of this range can be achieved only through low background techniques, such as used to obtain the results presented here.

A theoretical and practical clarification on the calculation of reflection loss for microwave absorbing materials

NASA Astrophysics Data System (ADS)

Liu, Ying; Zhao, Kun; Drew, Michael G. B.; Liu, Yue

2018-01-01

Reflection loss is usually calculated and reported as a function of the thickness of microwave absorption material. However, misleading results are often obtained since the principles imbedded in the popular methods contradict the fundamental facts that electromagnetic waves cannot be reflected in a uniform material except when there is an interface and that there are important differences between the concepts of characteristic impedance and input impedance. In this paper, these inconsistencies have been analyzed theoretically and corrections provided. The problems with the calculations indicate a gap between the background knowledge of material scientists and microwave engineers and for that reason a concise review of transmission line theory is provided along with the mathematical background needed for a deeper understanding of the theory of reflection loss. The expressions of gradient, divergence, Laplacian, and curl operators in a general orthogonal coordinate system have been presented including the concept of reciprocal vectors. Gauss's and Stokes's theorems have been related to Green's theorem in a novel way.

Resource Materials To Support Your Environmental Education Efforts. EE-TIPS (Environmental Education Technical Information Packages).

ERIC Educational Resources Information Center

North American Association for Environmental Education, Troy, OH.

This collection gathers together over 50 high-quality materials to support environmental education (EE) curricula. Because each community has unique environmental and educational needs, the guide includes a broad set of educational materials that can be adapted to a variety of settings. The materials can be used to supplement educational…

Biofilm development during the start-up period of anaerobic biofilm reactors: the biofilm Archaea community is highly dependent on the support material

PubMed Central

Habouzit, Frédéric; Hamelin, Jérôme; Santa-Catalina, Gaëlle; Steyer, Jean-P; Bernet, Nicolas

2014-01-01

To evaluate the impact of the nature of the support material on its colonization by a methanogenic consortium, four substrata made of different materials: polyvinyl chloride, 2 polyethylene and polypropylene were tested during the start-up of lab-scale fixed-film reactors. The reactor performances were evaluated and compared together with the analysis of the biofilms. Biofilm growth was quantified and the structure of bacterial and archaeal communities were characterized by molecular fingerprinting profiles (capillary electrophoresis-single strand conformation polymorphism). The composition of the inoculum was shown to have a major impact on the bacterial composition of the biofilm, whatever the nature of the support material or the organic loading rate applied to the reactors during the start-up period. In contrast, the biofilm archaeal populations were independent of the inoculum used but highly dependent on the support material. Supports favouring Archaea colonization, the limiting factor in the overall process, should be preferred. PMID:24612643

An overview of systematic reviews of normal labor and delivery management

PubMed Central

Iravani, Mina; Janghorbani, Mohsen; Zarean, Elahe; Bahrami, Masoud

2015-01-01

Background: Despite the scientific and medical advances for management of complicated health issues, the current maternity care setting has increased risks for healthy women and their babies. The aim of this study was to conduct an overview of published systematic reviews on the interventions used most commonly for management of normal labor and delivery in the first stage of labor. Materials and Methods: The online databases through March 2013, limited to systematic reviews of clinical trials were searched. An updated search was performed in April 2014. Two reviewers independently assessed data inclusion, extraction, and quality of methodology. Results: Twenty-three reviews (16 Cochrane, 7 non-Cochrane), relating to the most common care practices for management of normal labor and delivery in the first stage of labor, were included. Evidence does not support routine enemas, routine perineal shaving, continuous electronic fetal heart rate monitoring, routine early amniotomy, and restriction of fluids and food during labor. Evidence supports continuity of midwifery care and support, encouragement to non-supine position, and freedom in movement throughout labor. There is insufficient evidence to support routine administration of intravenous fluids and antispasmodics during labor. More evidence is needed regarding delayed admission until active labor and use of partograph. Conclusions: Evidence-based maternity care emphasizes on the practices that increase safety for mother and baby. If policymakers and healthcare providers wish to promote obstetric care quality successfully, it is important that they implement evidence-based clinical practices in routine midwifery care. PMID:26120327

The best encouraging persons in labor: A content analysis of Iranian mothers' experiences of labor support

PubMed Central

Fathi Najafi, Tahereh; Latifnejad Roudsari, Robab; Ebrahimipour, Hossein

2017-01-01

Background and aims The process of giving birth is very stressing for the mother. Meanwhile, maternity ward staff’s lack of awareness of mothers’ fears make mothers feel lonely and helpless. This study aimed to explore women’s perceptions of labor support during vaginal delivery. Materials and methods This exploratory qualitative study used qualitative content analysis to explore Iranian mothers’ experiences of labor support. Data were collected using observations and semi-structured interviews with 25 individuals. The participants were recruited through a purposive sampling method. Results Three categories, including “involvement of the spouse in the labor process”, “asking for a companion during labor”, and “mother’s self-care to cope with labor pain”, emerged during data analysis. These categories were merged to form the main theme of “trying to comply with the labor process”. Conclusion Women believed that the presence of a companion, e.g. their husband, a family member, or a doula, during labor helped them better deal with the labor process, particularly when they felt lonely. Health care providers are expected to consider the needs of mothers and try to provide holistic support for mothers during labor pain. Implications for practice It seems that some mothers adopted particular coping strategies without receiving any relevant training. It is noteworthy that although mothers may make every effort to minimize their pain, health professionals should also practice medical approaches to help them through the process of labor. PMID:28683112

Black-on-white polymer-stabilized cholesteric formulations

NASA Astrophysics Data System (ADS)

West, John L.; Magyar, Gregory R.; Francl, James J.; Nixon, Christine M.

1995-08-01

Recent research by Doane, Yang, and Chien demonstrated the use of cholesteric liquid crystals in multiplexed, high resolution, reflective diplays. These materials utilize the bistability of the cholesteric planar and focal conic states for displays with a colored image on a black background. Many commercial applications of these materials, such as electronic books and newspapers, portable faxes and personal data assistants, require, or at least prefer, black-on- white images. We report on relatively high polymer content (equalsV 20% by weight) dispersions of cholesteric liquid crystals that produce a white, reflecting, planar state. The polymer network appears to form cholesteric domains with varying pitch lengths resulting in planar states that reflect in the red, green, and blue portions of the spectrum. Utilizing a black absorbing layer behind a display using these materials offers white images on a black background, or vice-versa.

Developing radiopure copper alloys for high strength low background applications

NASA Astrophysics Data System (ADS)

Suriano, A. M.; Howard, S. M.; Christofferson, C. D.; Arnquist, I. J.; Hoppe, E. W.

2018-01-01

High purity copper continues to play an important role for ultra-low-background detectors. Measurements of rare nuclear decays, e.g. neutrinoless double-beta decay, and searches for dark matter can require construction materials that have high thermal and electrical conductivity with bulk radiopurity less than one micro-Becquerel per kilogram. However, experiments currently using components constructed of radiopure electroformed copper struggle with design of structural and mechanical parts due to the physical properties of pure copper. A higher strength material which possesses many of the favorable attributes of copper yet remains radiopure is desired. A number of copper alloying candidates which may provide improved mechanical performance and adequate radiopurity were considered. Development of an electrodeposited copper-chrome alloy from additive-free electrolyte systems is discussed. The resulting material is shown to possess high strength and meets the aforementioned radiopurity goals.

Material screening with HPGe counting station for PandaX experiment

NASA Astrophysics Data System (ADS)

Wang, X.; Chen, X.; Fu, C.; Ji, X.; Liu, X.; Mao, Y.; Wang, H.; Wang, S.; Xie, P.; Zhang, T.

2016-12-01

A gamma counting station based on high-purity germanium (HPGe) detector was set up for the material screening of the PandaX dark matter experiments in the China Jinping Underground Laboratory. Low background gamma rate of 2.6 counts/min within the energy range of 20 to 2700 keV is achieved due to the well-designed passive shield. The sentivities of the HPGe detetector reach mBq/kg level for isotopes like K, U, Th, and even better for Co and Cs, resulted from the low-background rate and the high relative detection efficiency of 175%. The structure and performance of the counting station are described in this article. Detailed counting results for the radioactivity in materials used by the PandaX dark-matter experiment are presented. The upgrading plan of the counting station is also discussed.

MCNP estimate of ZLS lens sensitivity in an x-ray field

NASA Astrophysics Data System (ADS)

Mitchell, Stephen E.; Baker, Stuart A.; Howe, Russell A.; Malone, Robert M.

2016-09-01

The telecentric zoom lens system (ZLS) has proven to be invaluable in flash x-ray field operations and recent successful experiments pertaining to stockpile stewardship. The ZLS contains 11 custom-manufactured lenses, a turning mirror (pellicle), and an x-ray-to-visible-light converting scintillator. Images are recorded on a fully characterized CCD. All hardware is supported by computerized, programmable, electro-mechanical mounts and alignment apparatus. Seven different glass material types varying in chemical stoichiometry comprise the 11 ZLS lenses. All lenses within the ZLS are out of the path of direct x-ray radiation during normal operation. However, any unshielded scattered x-ray radiation can result in energy deposition into the lenses, which may generate some scintillating light that can couple into the CCD. This extra light may contribute to a decrease in signal-to-noise ratio (SNR) and lower the overall fidelity of the radiograph images. An estimate of the scintillation generation and sensitivities for each of the seven types of glass used as lenses in the ZLS is presented. This report also includes estimates of the total observed background decoupling that each of the lens material types contribute.

Mathematical biology modules based on modern molecular biology and modern discrete mathematics.

PubMed

Robeva, Raina; Davies, Robin; Hodge, Terrell; Enyedi, Alexander

2010-01-01

We describe an ongoing collaborative curriculum materials development project between Sweet Briar College and Western Michigan University, with support from the National Science Foundation. We present a collection of modules under development that can be used in existing mathematics and biology courses, and we address a critical national need to introduce students to mathematical methods beyond the interface of biology with calculus. Based on ongoing research, and designed to use the project-based-learning approach, the modules highlight applications of modern discrete mathematics and algebraic statistics to pressing problems in molecular biology. For the majority of projects, calculus is not a required prerequisite and, due to the modest amount of mathematical background needed for some of the modules, the materials can be used for an early introduction to mathematical modeling. At the same time, most modules are connected with topics in linear and abstract algebra, algebraic geometry, and probability, and they can be used as meaningful applied introductions into the relevant advanced-level mathematics courses. Open-source software is used to facilitate the relevant computations. As a detailed example, we outline a module that focuses on Boolean models of the lac operon network.

Mathematical Biology Modules Based on Modern Molecular Biology and Modern Discrete Mathematics

PubMed Central

Davies, Robin; Hodge, Terrell; Enyedi, Alexander

2010-01-01

We describe an ongoing collaborative curriculum materials development project between Sweet Briar College and Western Michigan University, with support from the National Science Foundation. We present a collection of modules under development that can be used in existing mathematics and biology courses, and we address a critical national need to introduce students to mathematical methods beyond the interface of biology with calculus. Based on ongoing research, and designed to use the project-based-learning approach, the modules highlight applications of modern discrete mathematics and algebraic statistics to pressing problems in molecular biology. For the majority of projects, calculus is not a required prerequisite and, due to the modest amount of mathematical background needed for some of the modules, the materials can be used for an early introduction to mathematical modeling. At the same time, most modules are connected with topics in linear and abstract algebra, algebraic geometry, and probability, and they can be used as meaningful applied introductions into the relevant advanced-level mathematics courses. Open-source software is used to facilitate the relevant computations. As a detailed example, we outline a module that focuses on Boolean models of the lac operon network. PMID:20810955

Rapid extraction and assay of uranium from environmental surface samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barrett, Christopher A.; Chouyyok, Wilaiwan; Speakman, Robert J.

Extraction methods enabling faster removal and concentration of uranium compounds for improved trace and low-level assay are demonstrated for standard surface sampling material in support of nuclear safeguards efforts, health monitoring, and other nuclear analysis applications. A key problem with the existing surface sampling swipes is the requirement for complete digestion of sample and sampling matrix. This is a time-consuming and labour-intensive process that limits laboratory throughput, elevates costs, and increases background levels. Various extraction methods are explored for their potential to quickly and efficiently remove different chemical forms of uranium from standard surface sampling material. A combination of carbonatemore » and peroxide solutions is shown to give the most rapid and complete form of uranyl compound extraction and dissolution. This rapid extraction process is demonstrated to be compatible with standard inductive coupled plasma mass spectrometry methods for uranium isotopic assay as well as screening techniques such as x-ray fluorescence. The general approach described has application beyond uranium to other analytes of nuclear forensic interest (e.g., rare earth elements and plutonium) as well as heavy metals for environmental and industrial hygiene monitoring.« less

Integrated poly(dimethysiloxane) with an intrinsic nonfouling property approaching "absolute" zero background in immunoassays.

PubMed

Ma, Hongwei; Wu, Yuanzi; Yang, Xiaoli; Liu, Xing; He, Jianan; Fu, Long; Wang, Jie; Xu, Hongke; Shi, Yi; Zhong, Renqian

2010-08-01

The key to achieve a highly sensitive and specific protein microarray assay is to prevent nonspecific protein adsorption to an "absolute" zero level because any signal amplification method will simultaneously amplify signal and noise. Here, we develop a novel solid supporting material, namely, polymer coated initiator integrated poly(dimethysiloxane) (iPDMS), which was able to achieve such "absolute" zero (i.e., below the detection limit of instrument). The implementation of this iPDMS enables practical and high-quality multiplexed enzyme-linked immunosorbent assay (ELISA) of 11 tumor markers. This iPDMS does not need any blocking steps and only require mild washing conditions. It also uses on an average 8-fold less capture antibodies compared with the mainstream nitrocellulose (NC) film. Besides saving time and materials, iPDMS achieved a limit-of-detection (LOD) as low as 19 pg mL(-1), which is sufficiently low for most current clinical diagnostic applications. We expect to see an immediate impact of this iPDMS on the realization of the great potential of protein microarray in research and practical uses such as large scale and high-throughput screening, clinical diagnosis, inspection, and quarantine.

Hyperspectral target detection analysis of a cluttered scene from a virtual airborne sensor platform using MuSES

NASA Astrophysics Data System (ADS)

Packard, Corey D.; Viola, Timothy S.; Klein, Mark D.

2017-10-01

The ability to predict spectral electro-optical (EO) signatures for various targets against realistic, cluttered backgrounds is paramount for rigorous signature evaluation. Knowledge of background and target signatures, including plumes, is essential for a variety of scientific and defense-related applications including contrast analysis, camouflage development, automatic target recognition (ATR) algorithm development and scene material classification. The capability to simulate any desired mission scenario with forecast or historical weather is a tremendous asset for defense agencies, serving as a complement to (or substitute for) target and background signature measurement campaigns. In this paper, a systematic process for the physical temperature and visible-through-infrared radiance prediction of several diverse targets in a cluttered natural environment scene is presented. The ability of a virtual airborne sensor platform to detect and differentiate targets from a cluttered background, from a variety of sensor perspectives and across numerous wavelengths in differing atmospheric conditions, is considered. The process described utilizes the thermal and radiance simulation software MuSES and provides a repeatable, accurate approach for analyzing wavelength-dependent background and target (including plume) signatures in multiple band-integrated wavebands (multispectral) or hyperspectrally. The engineering workflow required to combine 3D geometric descriptions, thermal material properties, natural weather boundary conditions, all modes of heat transfer and spectral surface properties is summarized. This procedure includes geometric scene creation, material and optical property attribution, and transient physical temperature prediction. Radiance renderings, based on ray-tracing and the Sandford-Robertson BRDF model, are coupled with MODTRAN for the inclusion of atmospheric effects. This virtual hyperspectral/multispectral radiance prediction methodology has been extensively validated and provides a flexible process for signature evaluation and algorithm development.

Surface tension mediated conversion of light to work

DOEpatents

Okawa, David; Pastine, Stefan J; Zettl, Alexander K; Frechet, Jean M. J

2014-12-02

Disclosed are a method and apparatus for converting light energy to mechanical energy by modification of surface tension on a supporting fluid. The apparatus comprises an object which may be formed as a composite object comprising a support matrix and a highly light absorptive material. The support matrix may comprise a silicon polymer. The highly light absorptive material may comprise vertically aligned carbon nanotubes (VANTs) embedded in the support matrix. The composite object is supported on a fluid. By exposing the highly light absorptive material to light, heat is generated, which changes the surface tension of the composite object, causing it to move physically within the fluid.

CUORE: The Three Towers Test

NASA Astrophysics Data System (ADS)

Sparks, Laura; Goodsell, Alison

2009-11-01

Cryogenic Underground Observatory for Rare Events (CUORE) will be part of the next generation of detectors used to search for neutrinoless double beta decay (0vBB). Located in Assergi, Italy at the Gran Sasso National Laboratory (LNGS), CUORE will be a large cryogenic bolometer composed of 988 tellurium dioxide (TeO2) detectors with a total mass of 750 kg, and will search for 0vBB in 130Te. As the experiment will monitor the extremely rare event of 0vBB, all factors contributing to background need to be minimized to effectively increase the sensitivity. We assisted the LNGS researchers over the summer of 2008 by supporting Research and Development efforts to reduce the radioactive background of the experiment. Activities involved decontaminating the copper frame of radon daughters, and chemically etching and lapping the TeO2 crystals with nitric acid and silicon dioxide, respectively, to remove surface contaminants that contribute to background counts. This work was supported in part by NSF grant PHY-0653284 and the California State Faculty Support Grant.

'You find yourself.' Perceptions of nursing students from non-English speaking backgrounds of the effect of an intensive language support program on their oral clinical communication skills.

PubMed

Rogan, Fran; San Miguel, Caroline; Brown, Di; Kilstoff, Kathleen

2006-10-01

Nurses of ethnically diverse backgrounds are essential in providing multicultural populations in western societies with culturally and linguistically competent health care. However, many nurses from non-English speaking backgrounds (NESB) are at high risk of failure in university programs particularly during clinical placements. Few studies investigate the clinical experiences of students from NESB and strategies to support their learning. This study describes perceptions of fifteen undergraduate nursing students from NESB about their first clinical placement in an Australian university program and the effect of a language support program on their oral clinical communication skills. Three categories arose: *Wanting to belong but feeling excluded; *Wanting to learn how to...; and *You find yourself. While many students find clinical placement challenging, it appeared difficult for students in this study as language and cultural adjustments required some modification of their usual ways of thinking and communicating, often without coping strategies available to other students.

What makes a house a home? An evaluation of a supported housing project for individuals with long-term psychiatric backgrounds.

PubMed

Boydell, K M; Everett, B

1992-01-01

Supported housing (as distinct from supportive housing) emphasizes the values of consumer choice; independence; participation; permanence; normalcy; and flexible, ongoing supports. As a model, it has only recently become popular in the literature and therefore little is known of its effectiveness in serving people with long-term psychiatric backgrounds. In 1989, Homeward Projects, a community mental health agency located in Metropolitan Toronto, established a supported housing project. Homeward included an evaluative component in its program from the outset. In order to give equal weight to the tenants' opinions, both quantitative and qualitative methodologies were employed. In the quantitative component, residential milieu, social support, and service delivery were examined. The qualitative component involved an ethnographic study which allowed the tenants to voice their experiences of living in such a setting. Results provided a rich understanding of the model. Overall, the tenants eventually came to describe their house as a home.