Actively addressed single pixel full-colour plasmonic display

NASA Astrophysics Data System (ADS)

Franklin, Daniel; Frank, Russell; Wu, Shin-Tson; Chanda, Debashis

2017-05-01

Dynamic, colour-changing surfaces have many applications including displays, wearables and active camouflage. Plasmonic nanostructures can fill this role by having the advantages of ultra-small pixels, high reflectivity and post-fabrication tuning through control of the surrounding media. However, previous reports of post-fabrication tuning have yet to cover a full red-green-blue (RGB) colour basis set with a single nanostructure of singular dimensions. Here, we report a method which greatly advances this tuning and demonstrates a liquid crystal-plasmonic system that covers the full RGB colour basis set, only as a function of voltage. This is accomplished through a surface morphology-induced, polarization-dependent plasmonic resonance and a combination of bulk and surface liquid crystal effects that manifest at different voltages. We further demonstrate the system's compatibility with existing LCD technology by integrating it with a commercially available thin-film-transistor array. The imprinted surface interfaces readily with computers to display images as well as video.

Colour Changes in Meat of Foals as Affected by Slaughtering Age and Post-thawing Time

PubMed Central

De Palo, P.; Maggiolino, A.; Centoducati, P.; Tateo, A.

2012-01-01

The aim of the present work was to investigate how colour changes of foal meat can vary after thawing out in relation to the slaughtering age of the horses and to the post-thawing time. Eighteen Italian Heavy Draught Horse (IHDH) foals were used for the trial. They were subdivided in three groups according to their slaughtering age (6, 11 and 18 months). Two different surfaces were investigated for each sample: a fresh cut surface (daily renewed cutting surface: DRCS), and not-renewed cutting surface (NRCS). The redness of both investigated surfaces increased with slaughtering age (p<0.01). Moreover, this parameter decreased during post-thawing time (p<0.01) only on the NRCS, probably due to the myoglobin oxidation processes. Colour is an important visual cue denoting perceived quality by consumers. So, by a chromatic perspective the thawed meat of IHDH foals slaughtered at 6 and 11 months proved to be that which best meets the market requirements. PMID:25049544

Investigations on the effects of mouthrinses on the colour stability and surface roughness of different dental bioceramics

PubMed Central

Varol, Osman

2017-01-01

PURPOSE In this study, three bioceramic materials, [IPS Empress CAD (Ivoclar), IPS e.max CAD (Ivoclar), and Lava Ultimate CAD (3M ESPE)] were treated with three commercial mouthrinses [Listerine, Tantum Verde, and Klorhex]; and changes in colour reflectance and surface roughness values were then quantitatively assessed. MATERIALS AND METHODS One hundred and twenty ceramic samples, with dimensions of 2 × 12 × 14 mm, were prepared and divided into nine sample groups, except three control samples. The samples were immersed in the mouthrinse solutions for 120 hrs, and changes in colour reflectance and surface roughness values were measured by UV light spectrophotometry (Vita Easyshade; VITA Zahnfabrik) and by profilometer device (MitutoyoSurftest SJ-301), respectively. The change of surface roughness was inspected by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). RESULTS There was a positive correlation between the ΔE and increase in the surface roughness. Two of the ceramic materials, IPS Empress and Lava Ultimate, were affected significantly by the treatment of the mouthrinse solutions (P<.05). The most affecting solution was Tantum Verde and the most affected material was Lava Ultimate. As expected, the most resistant material to ΔE and chemical corrosion was IPS e max CAD among the materials used. CONCLUSION This work implied that mouthrinse with lower alcohol content had less deteriorating effect on colour and on the surface morphology of the bioceramic materials. PMID:28680552

Actively addressed single pixel full-colour plasmonic display

PubMed Central

Franklin, Daniel; Frank, Russell; Wu, Shin-Tson; Chanda, Debashis

2017-01-01

Dynamic, colour-changing surfaces have many applications including displays, wearables and active camouflage. Plasmonic nanostructures can fill this role by having the advantages of ultra-small pixels, high reflectivity and post-fabrication tuning through control of the surrounding media. However, previous reports of post-fabrication tuning have yet to cover a full red-green-blue (RGB) colour basis set with a single nanostructure of singular dimensions. Here, we report a method which greatly advances this tuning and demonstrates a liquid crystal-plasmonic system that covers the full RGB colour basis set, only as a function of voltage. This is accomplished through a surface morphology-induced, polarization-dependent plasmonic resonance and a combination of bulk and surface liquid crystal effects that manifest at different voltages. We further demonstrate the system's compatibility with existing LCD technology by integrating it with a commercially available thin-film-transistor array. The imprinted surface interfaces readily with computers to display images as well as video. PMID:28488671

A laboratory investigation of colour changes in two contemporary resin composites on exposure to spices.

PubMed

Yew, H Z; Berekally, T L; Richards, L C

2013-12-01

The aim of this study was to evaluate colour stability upon exposure to spices of a nano-filled and a micro-hybrid resin composite finished either with Sof-Lex™ discs (SLD) or against plastic strips (PS). Forty cylindrical specimens of 3 mm thickness were fabricated from Filtek Supreme XT ™ (FS) and Gradia Direct X™ (GD). The top surface of each specimen was polished with SLD while the bottom surface was finished against PS. All samples were immersed in staining solutions (0.1% weight turmeric, paprika and tamarind) and distilled water at 37 °C. Colour after 0, 24, 72 and 168 hours of immersion was recorded with a reflection spectrophotometer using CIE L*a*b* parameters and the results were statistically analysed with repeated measures of ANOVA and Bonferroni post hoc tests. Among all the staining solutions tested, the highest colour deviation was obtained in the turmeric group. FS finished against PS showed significantly more colour changes compared to specimens polished with SLD, while GD finished against PS were found to be more resistant to colour changes. Within the limitations of this study all the spices tested have the potential to stain resin composites with turmeric causing the most significant discolouration. Micro-hybrid and nano-filled resin composites appeared to respond differently to staining by spices when either finished with PS or polished with SLD. © 2013 Australian Dental Association.

Controllable liquid colour-changing lenses with microfluidic channels for vision protection, camouflage and optical filtering based on soft lithography fabrication.

PubMed

Zhang, Min; Li, Songjing

2016-01-01

In this work, liquid colour-changing lenses for vision protection, camouflage and optical filtering are developed by circulating colour liquids through microfluidic channels on the lenses manually. Soft lithography technology is applied to fabricate the silicone liquid colour-changing layers with microfluidic channels on the lenses instead of mechanical machining. To increase the hardness and abrasion resistance of the silicone colour-changing layers on the lenses, proper fabrication parameters such as 6:1 (mass ration) mixing proportion and 100 °C curing temperature for 2 h are approved for better soft lithography process of the lenses. Meanwhile, a new surface treatment for the irreversible bonding of silicone colour-changing layer with optical resin (CR39) substrate lens by using 5 % (volume ratio) 3-Aminopropyltriethoxysilane solution is proposed. Vision protection, camouflage and optical filtering functions of the lenses are investigated with different designs of the channels and multi-layer structures. Each application can not only well achieve their functional demands, but also shows the advantages of functional flexibility, rapid prototyping and good controllability compared with traditional ways. Besides optometry, some other designs and applications of the lenses are proposed for potential utility in the future.

Evaluation of Staining-Dependent Colour Changes in Resin Composites Using Principal Component Analysis

PubMed Central

Manojlovic, D.; Lenhardt, L.; Milićević, B.; Antonov, M.; Miletic, V.; Dramićanin, M. D.

2015-01-01

Colour changes in Gradia Direct™ composite after immersion in tea, coffee, red wine, Coca-Cola, Colgate mouthwash, and distilled water were evaluated using principal component analysis (PCA) and the CIELAB colour coordinates. The reflection spectra of the composites were used as input data for the PCA. The output data (scores and loadings) provided information about the magnitude and origin of the surface reflection changes after exposure to the staining solutions. The reflection spectra of the stained samples generally exhibited lower reflection in the blue spectral range, which was manifested in the lower content of the blue shade for the samples. Both analyses demonstrated the high staining abilities of tea, coffee, and red wine, which produced total colour changes of 4.31, 6.61, and 6.22, respectively, according to the CIELAB analysis. PCA revealed subtle changes in the reflection spectra of composites immersed in Coca-Cola, demonstrating Coca-Cola’s ability to stain the composite to a small degree. PMID:26450008

Liquid-induced colour change in a beetle: the concept of a photonic cell.

PubMed

Mouchet, Sébastien R; Van Hooijdonk, Eloise; Welch, Victoria L; Louette, Pierre; Colomer, Jean-François; Su, Bao-Lian; Deparis, Olivier

2016-01-13

The structural colour of male Hoplia coerulea beetles is notable for changing from blue to green upon contact with water. In fact, reversible changes in both colour and fluorescence are induced in this beetle by various liquids, although the mechanism has never been fully explained. Changes enacted by water are much faster than those by ethanol, in spite of ethanol's more rapid spread across the elytral surface. Moreover, the beetle's photonic structure is enclosed by a thin scale envelope preventing direct contact with the liquid. Here, we note the presence of sodium, potassium and calcium salts in the scale material that mediate the penetration of liquid through putative micropores. The result leads to the novel concept of a "photonic cell": namely, a biocompatible photonic structure that is encased by a permeable envelope which mediates liquid-induced colour changes in that photonic structure. Engineered photonic cells dispersed in culture media could revolutionize the monitoring of cell-metabolism.

Evaluation of Staining-Dependent Colour Changes in Resin Composites Using Principal Component Analysis.

PubMed

Manojlovic, D; Lenhardt, L; Milićević, B; Antonov, M; Miletic, V; Dramićanin, M D

2015-10-09

Colour changes in Gradia Direct™ composite after immersion in tea, coffee, red wine, Coca-Cola, Colgate mouthwash, and distilled water were evaluated using principal component analysis (PCA) and the CIELAB colour coordinates. The reflection spectra of the composites were used as input data for the PCA. The output data (scores and loadings) provided information about the magnitude and origin of the surface reflection changes after exposure to the staining solutions. The reflection spectra of the stained samples generally exhibited lower reflection in the blue spectral range, which was manifested in the lower content of the blue shade for the samples. Both analyses demonstrated the high staining abilities of tea, coffee, and red wine, which produced total colour changes of 4.31, 6.61, and 6.22, respectively, according to the CIELAB analysis. PCA revealed subtle changes in the reflection spectra of composites immersed in Coca-Cola, demonstrating Coca-Cola's ability to stain the composite to a small degree.

Liquid-induced colour change in a beetle: the concept of a photonic cell

PubMed Central

Mouchet, Sébastien R.; Van Hooijdonk, Eloise; Welch, Victoria L.; Louette, Pierre; Colomer, Jean-François; Su, Bao-Lian; Deparis, Olivier

2016-01-01

The structural colour of male Hoplia coerulea beetles is notable for changing from blue to green upon contact with water. In fact, reversible changes in both colour and fluorescence are induced in this beetle by various liquids, although the mechanism has never been fully explained. Changes enacted by water are much faster than those by ethanol, in spite of ethanol’s more rapid spread across the elytral surface. Moreover, the beetle’s photonic structure is enclosed by a thin scale envelope preventing direct contact with the liquid. Here, we note the presence of sodium, potassium and calcium salts in the scale material that mediate the penetration of liquid through putative micropores. The result leads to the novel concept of a “photonic cell”: namely, a biocompatible photonic structure that is encased by a permeable envelope which mediates liquid-induced colour changes in that photonic structure. Engineered photonic cells dispersed in culture media could revolutionize the monitoring of cell-metabolism. PMID:26758681

Colour centres and nanostructures on the surface of laser crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulagin, N A

2012-11-30

This paper presents a study of structural and radiationinduced colour centres in the bulk and ordered nanostructures on the surface of doped laser crystals: sapphire, yttrium aluminium garnet and strontium titanate. The influence of thermal annealing, ionising radiation and plasma exposure on the spectroscopic properties of high-purity materials and crystals containing Ti, V and Cr impurities is examined. Colour centres resulting from changes in the electronic state of impurities and plasma-induced surface modification of the crystals are studied by optical, EPR and X-ray spectroscopies, scanning electron microscopy and atomic force microscopy. X-ray line valence shift measurements are used to assessmore » changes in the electronic state of some impurity and host ions in the bulk and on the surface of oxide crystals. Conditions are examined for the formation of one- and two-level arrays of ordered crystallites 10{sup -10} to 10{sup -7} m in size on the surface of crystals doped with irongroup and lanthanoid ions. The spectroscopic properties of the crystals are analysed using ab initio self-consistent field calculations for Me{sup n+} : [O{sup 2-}]{sub k} clusters. (interaction of laser radiation with matter. laser plasma)« less

Poseidon's paintbox : historical archives of ocean colour in global-change perspective

NASA Astrophysics Data System (ADS)

Wernand, M. R.

2011-11-01

In the thesis introduction issues are discussed on the historical background of marine optics and on marine optical devices that were used over the past centuries to observe and measure; as in all sciences, in marine optics we can see a steady development: that of ‘measuring’, beginning many centuries ago, to 'knowing' and since less than a century to the understanding of the phenomenon. Hereafter, six themes are treated successively. The first theme, ‘Ocean optics from 1600 (Hudson) to 1930 (Raman), shift in interpretation of natural water colouring’, addresses the question of why it took so long a time to explain the phenomenon ‘the colouring of the sea’, especially the blue colour, despite the age-long interest of sailors, for practical purposes of navigation and detection of fish - of which more later. The second theme ‘On the history of the Secchi disc’, describes the search to establish methods for the determination of (sea) water clarity concerning purposes of navigation (near coast colour changes) just mentioned to detect shoals, and for a more basic purpose, tracing lost objects. The search to determine the clarity of lakes and seas culminated in the invention of the Secchi disc, used since the late 19th century. The third theme, ‘Spectral analysis of the Forel-Ule ocean colour comparator scale’, addresses the accuracy of a colour scale proposed, used in limnology and oceanography. Scale observations are put into perspective with contemporary measurements on the colour of the sea. The fourth theme, ‘Ocean colour changes in the North Pacific since 1930’, handles the question whether long-term ocean colour changes using historic Forel-Ule observations, in this part of the ocean made very frequently over time, can be determined in relation to global change. In principal global warming may cause a gradual change in ocean colour due to the effect of biological, chemical and physical aspects of the ocean-surface. The fifth theme, ‘MERIS-based ocean colour classification using the Forel-Ule scale’, addresses the question whether a relation can be established between the old Forel-Ule methodology, the classification of ocean colour by means of one of the scale colours, and the more recent satellite ocean colour methodology. The sixth theme, ‘Trends in ocean colour and chlorophyll concentration since 1889 to present’, addresses decadal colour changes per ocean and sea, using the longest available Forel-Ule dataset and confirms the possibility to transform these colour changes into chlorophyll concentration (indicative of the biomass of marine planktonic microalgae) changes. Such a transformation is needed to provide a link to the present in which chlorophyll concentrations are determined by using new technologies such as satellite remote sensing calibrated with high-performance liquid chromatography (HPLC) pigment analysis to determine marine microalgae pigments.

Equal Insistence of Proportion of Colour on a 2D Surface

NASA Astrophysics Data System (ADS)

Staig-Graham, B. N.

2006-06-01

Katz conducted experiments on Insistence and Equal Insistence, using an episcotister, chromatic, and achromatic papers which he viewed under different intensities of a light sources and chromatic illumination. His principle of Equal Insistence, combined with Goethe's reputed proportions of surface colours according to their luminosity, and Strzeminski's concept of Unism in painting inspire the author's current painting practice. However, a whole new route of research has been opened by the introduction of Time as a phenomenon of Equal Insitence and Image Perception Fading, under contolled conditions of observer movement at different distances, viewing angles, and illumination. Visual knowledge of Equal Insistence indicates, so far, several apparent changes to the properties of surface colours, and its actual effect upon the shape and size of paintings and symbolism. Typical of the investigation are the achromatic images of an elephant and a mouse.

First CaSSIS Colour Images of Mars

NASA Astrophysics Data System (ADS)

Alfred, M.; Pommerol, A.; Thomas, N.; Cremonese, G.

2017-12-01

The Colour and Stereo Surface Imaging System (CaSSIS) on board ESA's Exomars Trace Gas Orbiter has acquired its first images of the surface of Mars on the 22nd and 26th of November, 2016. This commissioning campaign on the initial capture orbit was highly successful, allowing us to test the instrument, establish its performance and collect detailed images from the surface. Many of them have been publicly released within days following acquisition. These images and other commissioning data have demonstrated that the capabilities of the instrument are fully in-line with expectation. Although a colour image of Phobos produced from observations acquired on the 26th of November was rapidly released, the calibration and production of colour images from the surface of Mars proved to be more challenging. Having fixed technical issues, acquired and processed necessary in-flight calibration data, we have recently recalibrated the whole dataset, improving significantly the quality of the data and allowing us, for the first time, to produce high-quality colour images from the surface of Mars with CaSSIS data. The absolute calibration of the instrument is currently verified using stellar observations but the values of reflectivity obtained in each of the four colour channels for the surfaces of Mars and Phobos already show good consistency with other orbital data. The timing of CaSSIS acquisitions is very accurate and results in good colour matching, as already verified on-ground during the calibration campaign. The first few images acquired on the 22nd of November, shortly after TGO crossed the morning terminator, show unique views of the dusty terrains of the Tharsis region with solar incidence angle ranging between 60° and 80°. Comparison with images of the same areas acquired at later local times by other orbiters shows intriguing differences, related in particular to the brightness and colour of the floor of dust-filled craters that look bluer in the morning than in the afternoon. These observations and possible explanations of these changes in terms of diurnal volatile cycles will be presented and discussed, providing a glimpse into the future scientific activities permitted by CaSSIS once the nominal science phase begins in 2018.

Motion of glossy objects does not promote separation of lighting and surface colour

PubMed Central

2017-01-01

The surface properties of an object, such as texture, glossiness or colour, provide important cues to its identity. However, the actual visual stimulus received by the eye is determined by both the properties of the object and the illumination. We tested whether operational colour constancy for glossy objects (the ability to distinguish changes in spectral reflectance of the object, from changes in the spectrum of the illumination) was affected by rotational motion of either the object or the light source. The different chromatic and geometric properties of the specular and diffuse reflections provide the basis for this discrimination, and we systematically varied specularity to control the available information. Observers viewed animations of isolated objects undergoing either lighting or surface-based spectral transformations accompanied by motion. By varying the axis of rotation, and surface patterning or geometry, we manipulated: (i) motion-related information about the scene, (ii) relative motion between the surface patterning and the specular reflection of the lighting, and (iii) image disruption caused by this motion. Despite large individual differences in performance with static stimuli, motion manipulations neither improved nor degraded performance. As motion significantly disrupts frame-by-frame low-level image statistics, we infer that operational constancy depends on a high-level scene interpretation, which is maintained in all conditions. PMID:29291113

Classifying Natural Waters with the Forel-Ule Colour Index System: Results, Applications, Correlations and Crowdsourcing.

PubMed

Garaba, Shungudzemwoyo P; Friedrichs, Anna; Voß, Daniela; Zielinski, Oliver

2015-12-18

Societal awareness of changes in the environment and climate has grown rapidly, and there is a need to engage citizens in gathering relevant scientific information to monitor environmental changes due to recognition that citizens are a potential source of critical information. The apparent colour of natural waters is one aspect of our aquatic environment that is easy to detect and an essential complementary optical water quality indicator. Here we present the results and explore the utility of the Forel-Ule colour index (FUI) scale as a proxy for different properties of natural waters. A FUI scale is used to distinguish the apparent colours of different natural surface water masses. Correlation analysis was completed in an effort to determine the constituents of natural waters related to FUI. Strong correlations with turbidity, Secchi-disk depth, and coloured dissolved organic material suggest the FUI is a good indicator of changes related to other constituents of water. The increase in the number of tools capable of determining the FUI colours, (i) ocean colour remote sensing products; (ii) a handheld scale; and (iii) a mobile device app, make it a versatile relative measure of water quality. It has the potential to provide higher spatial and temporal resolution of data for a modernized classification of optical water quality. This FUI colour system has been favoured by several scientists in the last century because it is affordable and easy to use and provides indicative information about the colour of water and the water constituents producing that colour. It is therefore within the scope of a growing interest in the application and usefulness of basic measurement methodologies with the potential to provide timely benchmark information about the environment to the public, scientists and policymakers.

Classifying Natural Waters with the Forel-Ule Colour Index System: Results, Applications, Correlations and Crowdsourcing

PubMed Central

Garaba, Shungudzemwoyo P.; Friedrichs, Anna; Voß, Daniela; Zielinski, Oliver

2015-01-01

Societal awareness of changes in the environment and climate has grown rapidly, and there is a need to engage citizens in gathering relevant scientific information to monitor environmental changes due to recognition that citizens are a potential source of critical information. The apparent colour of natural waters is one aspect of our aquatic environment that is easy to detect and an essential complementary optical water quality indicator. Here we present the results and explore the utility of the Forel-Ule colour index (FUI) scale as a proxy for different properties of natural waters. A FUI scale is used to distinguish the apparent colours of different natural surface water masses. Correlation analysis was completed in an effort to determine the constituents of natural waters related to FUI. Strong correlations with turbidity, Secchi-disk depth, and coloured dissolved organic material suggest the FUI is a good indicator of changes related to other constituents of water. The increase in the number of tools capable of determining the FUI colours, (i) ocean colour remote sensing products; (ii) a handheld scale; and (iii) a mobile device app, make it a versatile relative measure of water quality. It has the potential to provide higher spatial and temporal resolution of data for a modernized classification of optical water quality. This FUI colour system has been favoured by several scientists in the last century because it is affordable and easy to use and provides indicative information about the colour of water and the water constituents producing that colour. It is therefore within the scope of a growing interest in the application and usefulness of basic measurement methodologies with the potential to provide timely benchmark information about the environment to the public, scientists and policymakers. PMID:26694444

Looking at anything that is green when hearing "frog": how object surface colour and stored object colour knowledge influence language-mediated overt attention.

PubMed

Huettig, Falk; Altmann, Gerry T M

2011-01-01

Three eye-tracking experiments investigated the influence of stored colour knowledge, perceived surface colour, and conceptual category of visual objects on language-mediated overt attention. Participants heard spoken target words whose concepts are associated with a diagnostic colour (e.g., "spinach"; spinach is typically green) while their eye movements were monitored to (a) objects associated with a diagnostic colour but presented in black and white (e.g., a black-and-white line drawing of a frog), (b) objects associated with a diagnostic colour but presented in an appropriate but atypical colour (e.g., a colour photograph of a yellow frog), and (c) objects not associated with a diagnostic colour but presented in the diagnostic colour of the target concept (e.g., a green blouse; blouses are not typically green). We observed that colour-mediated shifts in overt attention are primarily due to the perceived surface attributes of the visual objects rather than stored knowledge about the typical colour of the object. In addition our data reveal that conceptual category information is the primary determinant of overt attention if both conceptual category and surface colour competitors are copresent in the visual environment.

A Study on Generic Representation of Skeletal Remains Replication of Prehistoric Burial

NASA Astrophysics Data System (ADS)

Shao, C.-W.; Chiu, H.-L.; Chang, S.-K.

2015-08-01

Generic representation of skeletal remains from burials consists of three dimensions which include physical anthropologists, replication technicians, and promotional educators. For the reason that archaeological excavation is irreversible and disruptive, detail documentation and replication technologies are surely needed for many purposes. Unearthed bones during the process of 3D digital scanning need to go through reverse procedure, 3D scanning, digital model superimposition, rapid prototyping, mould making, and the integrated errors generated from the presentation of colours and textures are important issues for the presentation of replicate skeleton remains among professional decisions conducted by physical anthropologists, subjective determination of makers, and the expectations of viewers. This study presents several cases and examines current issues on display and replication technologies for human skeletal remains of prehistoric burials. This study documented detail colour changes of human skeleton over time for the reference of reproduction. The tolerance errors of quantification and required technical qualification is acquired according to the precision of 3D scanning, the specification requirement of rapid prototyping machine, and the mould making process should following the professional requirement for physical anthropological study. Additionally, the colorimeter is adopted to record and analyse the "colour change" of the human skeletal remains from wet to dry condition. Then, the "colure change" is used to evaluate the "real" surface texture and colour presentation of human skeletal remains, and to limit the artistic presentation among the human skeletal remains reproduction. The"Lingdao man No.1", is a well preserved burial of early Neolithic period (8300 B.P.) excavated from Liangdao-Daowei site, Matsu, Taiwan , as the replicating object for this study. In this study, we examined the reproduction procedures step by step for ensuring the surface texture and colour of the replica matches the real human skeletal remains when discovered. The "colour change" of the skeleton documented and quantified in this study could be the reference for the future study and educational exhibition of human skeletal remain reproduction.

The effect of three different mouthrinses on the surface hardness, gloss and colour change of bleached nano composite resins.

PubMed

Gurgan, Sevil; Yalcin Cakir, Filiz

2008-09-01

This in vitro study evaluated the effects of three mouthrinses (Listerine--alcohol containing, Oral B--alcohol free and Rembrandt Plus--peroxide whitening rinse) on the surface hardness, gloss and colour of a nanofill (Filtek Supreme) and nanohybrid (Simile) composite resin that had been subjected to bleaching treatment. 30 specimens of each material were fabricated and randomly divided into three groups of 10. The hardness, gloss and CIE Lab colour parameters of each specimen were assessed prior to the experiments. Specimens were exposed to the 10% carbamide peroxide bleaching agent (Vivastyle) for 2 hours per day for 14 days. Following the bleaching treatment measurements were repeated. The specimens were then conditioned with mouthrinses for 12 hours which was equivalent in time to 1 year of two minutes daily use. The specimens were measured again for hardness, gloss and colour and data were subjected to the statistical analysis. The result of this study showed no statististical difference between the restorative materials after bleaching and the use of mouthrinses (p > 0.05). Bleaching treatment and the use of mouthrinses af fected the hardness, gloss and colour of both resins. Significant differences were observed with the use of mouthrinses for all parameters (p < 0.05). Rembrandt Plus promoted the greatest changes, followed by Listerine and Oral B.

Bio-inspired colorimetric film based on hygroscopic coloration of longhorn beetles (Tmesisternus isabellae)

PubMed Central

Seo, Han-bok; Lee, Seung-Yop

2017-01-01

Structure-dependent colour is caused by the interaction of light with photonic crystal structures rather than pigments. The elytra of longhorn beetles Tmesisternus isabellae appear to be iridescent green in a dry state and turn to red when exposed to humidity. Based on the hygroscopic colouration of the longhorn beetle, we have developed centimeter-scale colorimetric opal films using a novel self-assembly method. The micro-channel assisted assembly technique adopts both natural evaporation and rotational forced drying, enhancing the surface binding of silica particles and the packing density by reducing the lattice constant and structural defects. The fabricated large-scale photonic film changes its structural colour from green to red when exposed to water vapour, similarly to the colorimetric feature of the longhorn beetle. The humidity-dependent colour change of the opal film is shown to be reversible and durable over five-hundred cycles of wetting and drying. PMID:28322307

Bio-inspired colorimetric film based on hygroscopic coloration of longhorn beetles (Tmesisternus isabellae)

NASA Astrophysics Data System (ADS)

Seo, Han-Bok; Lee, Seung-Yop

2017-03-01

Structure-dependent colour is caused by the interaction of light with photonic crystal structures rather than pigments. The elytra of longhorn beetles Tmesisternus isabellae appear to be iridescent green in a dry state and turn to red when exposed to humidity. Based on the hygroscopic colouration of the longhorn beetle, we have developed centimeter-scale colorimetric opal films using a novel self-assembly method. The micro-channel assisted assembly technique adopts both natural evaporation and rotational forced drying, enhancing the surface binding of silica particles and the packing density by reducing the lattice constant and structural defects. The fabricated large-scale photonic film changes its structural colour from green to red when exposed to water vapour, similarly to the colorimetric feature of the longhorn beetle. The humidity-dependent colour change of the opal film is shown to be reversible and durable over five-hundred cycles of wetting and drying.

Independent effects of colour on object identification and memory.

PubMed

Lloyd-Jones, Toby J; Nakabayashi, Kazuyo

2009-02-01

We examined the effects of colour on object identification and memory using a study-test priming procedure with a coloured-object decision task at test (i.e., deciding whether an object is correctly coloured). Objects were selected to have a single associated colour and were either correctly or incorrectly coloured. In addition, object shape and colour were either spatially integrated (i.e., colour fell on the object surface) or spatially separated (i.e., colour formed the background to the object). Transforming the colour of an object from study to test (e.g., from a yellow banana to a purple banana) reduced priming of response times, as compared to when the object was untransformed. This utilization of colour information in object memory was not contingent upon colour falling on the object surface or whether the resulting configuration was of a correctly or incorrectly coloured object. In addition, we observed independent effects of colour on response times, whereby coloured-object decisions were more efficient for correctly than for incorrectly coloured objects but only when colour fell on the object surface. These findings provide evidence for two distinct mechanisms of shape-colour binding in object processing.

Iridescent colour production in hairs of blind golden moles (Chrysochloridae).

PubMed

Snyder, Holly K; Maia, Rafael; D'Alba, Liliana; Shultz, Allison J; Rowe, Karen M C; Rowe, Kevin C; Shawkey, Matthew D

2012-06-23

Relative to other metazoans, the mammalian integument is thought to be limited in colour. In particular, while iridescence is widespread among birds and arthropods, it has only rarely been reported in mammals. Here, we examine the colour, morphology and optical mechanisms in hairs from four species of golden mole (Mammalia: Chrysochloridae) that are characterized by sheens ranging from purple to green. Microspectrophotometry reveals that this colour is weak and variable. Iridescent hairs are flattened and have highly reduced cuticular scales, providing a broad and smooth surface for light reflection. These scales form multiple layers of light and dark materials of consistent thickness, strikingly similar to those in the elytra of iridescent beetles. Optical modelling suggests that the multi-layers produce colour through thin-film interference, and that the sensitivity of this mechanism to slight changes in layer thickness and number explains colour variability. While coloured integumentary structures are typically thought to evolve as sexual ornaments, the blindness of golden moles suggests that the colour may be an epiphenomenon resulting from evolution via other selective factors, including the ability to move and keep clean in dirt and sand.

Colour analysis of the equine endometrium: comparison of spectrophotometry and computer-assisted analysis of photographs within the L*a*b* colour space system.

PubMed

Neuhauser, S; Handler, J

2013-09-01

The aims of this study were to compare two different methods of quantifying the colour of the luminal surface of the equine endometrium and to relate the results to histopathological evidence of inflammation and fibrosis. The mucosal surfaces of 17 equine uteri obtained from an abattoir were assessed using a spectrophotometer and by computer-assisted analysis of photographs. Values were converted into L(*)a(*)b(*) colour space. Although there was significant correlation between the two methods of quantification, variations in 'brightness', 'red' and 'yellow' values were noted. Within a given uterus, measurements using the spectrophotometer did not differ significantly. Using photographic analysis, brightness differed between horns, although no differences in chromaticity were found. Histopathological classification of changes within endometria corresponded to measured differences in colour. Extensive fibrosis was associated with increased brightness and decreased chromaticity using both methods. Inflammation correlated with reduced chromaticity, when measured by spectrophotometry, and with reduced brightness and yellow values, when assessed photographically. For this technique to gain wider acceptance as a diagnostic tool, e.g. for the endoscopic evaluation of uterine mucosae in vivo, standardised illumination techniques will be required so that colours can be compared and interpreted accurately. Copyright © 2013 Elsevier Ltd. All rights reserved.

Slow updating of the achromatic point after a change in illumination

PubMed Central

Lee, R. J.; Dawson, K. A.; Smithson, H. E.

2015-01-01

For a colour constant observer, the colour appearance of a surface is independent of the spectral composition of the light illuminating it. We ask how rapidly colour appearance judgements are updated following a change in illumination. We obtained repeated binary colour classifications for a set of stimuli defined by their reflectance functions and rendered under either sunlight or skylight. We used these classifications to derive boundaries in colour space that identify the observer’s achromatic point. In steady-state conditions of illumination, the achromatic point lay close to the illuminant chromaticity. In our experiment the illuminant changed abruptly every 21 seconds (at the onset of every 10th trial), allowing us to track changes in the achromatic point that were caused by the cycle of illuminant changes. In one condition, the test reflectance was embedded in a spatial pattern of reflectance samples under consistent illumination. The achromatic point migrated across colour space between the chromaticities of the steady-state achromatic points. This update took several trials rather than being immediate. To identify the factors that governed perceptual updating of appearance judgements we used two further conditions, one in which the test reflectance was presented in isolation and one in which the surrounding reflectances were rendered under an inconsistent and unchanging illumination. Achromatic settings were not well predicted by the information available from scenes at a single time-point. Instead the achromatic points showed a strong dependence on the history of chromatic samples. The strength of this dependence differed between observers and was modulated by the spatial context. PMID:22275468

Colour and pattern change against visually heterogeneous backgrounds in the tree frog Hyla japonica.

PubMed

Kang, Changku; Kim, Ye Eun; Jang, Yikweon

2016-03-02

Colour change in animals can be adaptive phenotypic plasticity in heterogeneous environments. Camouflage through background colour matching has been considered a primary force that drives the evolution of colour changing ability. However, the mechanism to which animals change their colour and patterns under visually heterogeneous backgrounds (i.e. consisting of more than one colour) has only been identified in limited taxa. Here, we investigated the colour change process of the Japanese tree frog (Hyla japonica) against patterned backgrounds and elucidated how the expression of dorsal patterns changes against various achromatic/chromatic backgrounds with/without patterns. Our main findings are i) frogs primarily responded to the achromatic differences in background, ii) their contrasting dorsal patterns were conditionally expressed dependent on the brightness of backgrounds, iii) against mixed coloured background, frogs adopted intermediate forms between two colours. Using predator (avian and snake) vision models, we determined that colour differences against different backgrounds yielded perceptible changes in dorsal colours. We also found substantial individual variation in colour changing ability and the levels of dorsal pattern expression between individuals. We discuss the possibility of correlational selection on colour changing ability and resting behaviour that maintains the high variation in colour changing ability within population.

Design of a colorimetric sensing platform using reflection mode plasmonic colour filters

NASA Astrophysics Data System (ADS)

Mudachathi, Renilkumar; Tanaka, Takuo

2017-08-01

Plasmonic nano structures fabricated using inexpensive and abundant aluminum metal shows intense narrow reflection peaks with strong response to the external stimuli, provides a simple yet powerful detection mechanism that is well suited for the development of low cost and low power sensors, such as colorimetric sensors, which transduces external stimuli or environmental changes in to visible colour changes. Such low cost and disposable sensors have huge demands in the point-of-care and home health care diagnostic applications. We present the design of a colorimetric sensing platform based on reflection mode plasmonic colour filters on both silicon and glass substrate, which demonstrate a sharp colour change for varying ambient refractive index. The sensor is essentially a plasmonic metamaterial in which the aluminum square plate hovering on a PMMA nano pillar in the background of a perforated aluminum reflector forms the unit cell which is arranged periodically in a 2D square lattice. The meta-surface has two distinct absorption peaks in the visible region leaving a strong reflection band, which strongly responds to the ambient refractive index change, provides a means for the realization of low cost colorimetric sensing platform.

UV light impact on ellagitannins and wood surface colour of European oak ( Quercus petraea and Quercus robur)

NASA Astrophysics Data System (ADS)

Zahri, S.; Belloncle, C.; Charrier, F.; Pardon, P.; Quideau, S.; Charrier, B.

2007-03-01

Two European oak species ( Q. petraea and Q. robur) have a high content of phenols which may participate in the alteration of colour upon UV irradiation. To study the photodegradation process of oak surfaces, the two oak species extractives, vescalagin, castalagin, ellagic acid and gallic acid were analysed quantitatively by HPLC before and after UV irradiation. Irradiation time was altered between 3, 24, 72, 96, 120, 144, 192 and 216 h. In parallel, any colour changes of Oak wood surface was followed after 120 h of UV-irradiation by measuring CIELAB parameters (DL*, Da*, Db* and DE*). We observed that 60% of total phenol content of extractives decreased after the maximal exposure time. Our findings also showed that castalagin and gallic acid were destroyed after 216 h and vescalagin and ellagic acid after 72 h. This study proves the photosenibility of oakwood extractives which, supplementary to lignin degradation, would strongly result in the discolouration of oak heartwood.

Filling schemes of silver dots inkjet-printed on pixelated nanostructured surfaces

NASA Astrophysics Data System (ADS)

Alan, Sheida; Jiang, Hao; Shahbazbegian, Haleh; Patel, Jasbir N.; Kaminska, Bozena

2017-03-01

Recently, our group demonstrated an inkjet-based technique to enable high-throughput, versatile and full-colour printing of structural colours on generic pixelated nanostructures, termed as molded ink on nanostructured surfaces. The printed colours are controlled by the area of printed silver on the pixelated red, green and blue polymer nanostructure arrays. This paper investigates the behaviour of jetted silver ink droplets on nanostructured surfaces and the microscale dot patterns implemented during printing process, for achieving accurate and consistent colours in the printed images. The surface wettability and the schemes of filling silver dots inside the subpixels are crucial to the quality of printed images. Several related concepts and definitions are introduced, such as filling ratio, full dots per subpixel (DPSP), number of printable colours, colour leaking and dot merging. In our experiments, we first chemically modified the surface to control the wettability and dot size. From each type of modified surface, various filling schemes were experimented and the printed results were evaluated with comprehensive considerations on the number of printable colours and the negative effects of colour leaking and dot merging. Rational selection of the best filling scheme resulted in a 2-line filling scheme using 20 μm dot spacing and line spacing capable of printing 9261 different colours with 121 pixel per inch display resolution, on low-wettability surface. This study is of vital importance for scaling up the printing technique in industrial applications and provides meaningful insights for inkjet-printing on nanostructures.

Environmental and hormonal factors controlling reversible colour change in crab spiders.

PubMed

Llandres, Ana L; Figon, Florent; Christidès, Jean-Philippe; Mandon, Nicole; Casas, Jérôme

2013-10-15

Habitat heterogeneity that occurs within an individual's lifetime may favour the evolution of reversible plasticity. Colour reversibility has many different functions in animals, such as thermoregulation, crypsis through background matching and social interactions. However, the mechanisms underlying reversible colour changes are yet to be thoroughly investigated. This study aims to determine the environmental and hormonal factors underlying morphological colour changes in Thomisus onustus crab spiders and the biochemical metabolites produced during these changes. We quantified the dynamics of colour changes over time: spiders were kept in yellow and white containers under natural light conditions and their colour was measured over 15 days using a spectrophotometer. We also characterised the chemical metabolites of spiders changing to a yellow colour using HPLC. Hormonal control of colour change was investigated by injecting 20-hydroxyecdysone (20E) into spiders. We found that background colouration was a major environmental factor responsible for colour change in crab spiders: individuals presented with white and yellow backgrounds changed to white and yellow colours, respectively. An ommochrome precursor, 3-OH-kynurenine, was the main pigment responsible for yellow colour. Spiders injected with 20E displayed a similar rate of change towards yellow colouration as spiders kept in yellow containers and exposed to natural sunlight. This study demonstrates novel hormonal manipulations that are capable of inducing reversible colour change.

New opportunities in planetary geomorphology: an assessment of the capabilities of the Colour and Stereo Surface Imaging System (CaSSIS) on The Exomars Trace Gas Orbiter through Image Simulation.

NASA Astrophysics Data System (ADS)

Tornabene, Livio Leonardo; Seelos, Frank; Pommerol, Antoine; Thomas, Nick; Caudill, Christy; Conway, Susan J.

2017-04-01

The Colour and Stereo Surface Imaging System (CaSSIS) is a full-colour visible to near-infrared (VNIR) bi-directional pushframe stereo camera onboard the ExoMars 2016 Trace Gas Orbiter (TGO). For more details on ExoMars TGO and its payload, please see [4], and for the CaSSIS instrument see [1]. For details on the first Mars Capture Orbit (MCO)-acquired CaSSIS stereo images and preliminary 3D reconstructions from them [5]. CaSSIS will provide full-colour, stereo and repeat imaging spanning different times of day and covering all seasons. Such images will be used to address the following objectives: 1) characterizing possible [surface/subsurface] sources for methane and other trace gases; 2) investigating dynamic surface processes that may contribute to atmospheric gases; and 3) certifying and characterizing candidate landing site safety and hazards (e.g., rocks, slopes, etc.). Here we present a summary, and some highlights, based on the creation and analysis of simulated CaSSIS image cubes [see 2, 3]. We generated simulated images that are spatially (4.6 m/px) and spectrally (4-bands) consistent with CaSSIS from existing Mars Reconnaissance Orbiter (MRO) datasets. Simulated CaSSIS colours were generated from hyperspectral VNIR (S-detector) data from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) after the methods of [6], which were then combined with spatially oversampled and resampled 32-bit calibrated I/F images from the Context Camera (CTX) and High Resolution Imaging Science Experiment (HiRISE) [2, 3]. For more of the details on the simulation process and the various products produced please see [2, 3]. Our simulations show that such colour coverage will be particularly valuable towards facilitating and enhancing seasonal process and change detection studies. For example, a simulation image of Gasa crater demonstrates exactly how additional colour context would facilitate gully change detections that can be subtle and difficult to detect in single-band images, or when missed by the HiRISE colour swath. Another result based on our colour analysis includes, excellent separation of ferrous- and ferric-bearing surface materials provided by band ratio colour composite images utilizing the two NIR bands of CaSSIS (3RED, 4NIR). These images will be particularly useful for associating CaSSIS colour units with spectral units defined by orbiting spectrometers (e.g., CRISM), and thereby extend spectral mapping to CaSSIS spatial scales. This will particularly be beneficial for landing sites where it is difficult to achieve continuous colour coverage with HiRISE. Our analysis shows that dune movement can be detected at the scale of CaSSIS, given a long enough baseline. Other results include resolving: 1) larger individual or sets of Recurring Slope Lineae (RSL), 2) small impacts (including ice excavators), and 3) surface changes associated with landers/rovers (NOTE: lander/rovers and their tracks are not resolvable). References: [1] Thomas N. et al. (2016), submitted to SSR. [2] Tornabene L. et al. (2017), submitted to SSR. [3] Tornabene L. et al. (2016) LPSC 47, Abstract #2695. [4] Vago J. et al. (2015) SSR, 49 518-528. [5] Cremonese G. et al. (2017) LPSC 48. [6] Seelos F. et al. (2011) AGU Fall, vol. 23, Abstract #1714. [7] Delamere A. et al. (2010), Icarus, 205, 38-52. Acknowledgements: The authors wish to thank the spacecraft and instrument engineering teams for the successful completion of the instrument. CaSSIS is a project of the University of Bern and funded through the Swiss Space Office via ESA's PRODEX programme. The instrument hardware development was also supported by the Italian Space Agency (ASI) (ASI-INAF agreement no.I/018/12/0), INAF/Astronomical Observatory of Padova, and the Space Research Center (CBK) in Warsaw. Support from SGF (Budapest), the University of Arizona Lunar and Planetary Laboratory, and NASA are also gratefully acknowledged. The lead author also acknowledges personal Canadian-based support from the Canadian Space Agency (CSA), and the NSERC DG programme.

Colour and pattern change against visually heterogeneous backgrounds in the tree frog Hyla japonica

PubMed Central

Kang, Changku; Kim, Ye Eun; Jang, Yikweon

2016-01-01

Colour change in animals can be adaptive phenotypic plasticity in heterogeneous environments. Camouflage through background colour matching has been considered a primary force that drives the evolution of colour changing ability. However, the mechanism to which animals change their colour and patterns under visually heterogeneous backgrounds (i.e. consisting of more than one colour) has only been identified in limited taxa. Here, we investigated the colour change process of the Japanese tree frog (Hyla japonica) against patterned backgrounds and elucidated how the expression of dorsal patterns changes against various achromatic/chromatic backgrounds with/without patterns. Our main findings are i) frogs primarily responded to the achromatic differences in background, ii) their contrasting dorsal patterns were conditionally expressed dependent on the brightness of backgrounds, iii) against mixed coloured background, frogs adopted intermediate forms between two colours. Using predator (avian and snake) vision models, we determined that colour differences against different backgrounds yielded perceptible changes in dorsal colours. We also found substantial individual variation in colour changing ability and the levels of dorsal pattern expression between individuals. We discuss the possibility of correlational selection on colour changing ability and resting behaviour that maintains the high variation in colour changing ability within population. PMID:26932675

Subtle design changes control the difference in colour reflection from the dorsal and ventral wing-membrane surfaces of the damselfly Matronoides cyaneipennis.

PubMed

Nixon, M R; Orr, A G; Vukusic, P

2013-01-28

The hind wings of males of the damselfly Matronoides cyaneipennis exhibit iridescence that is blue dorsally and green ventrally. These structures are used semiotically in agonistic and courtship display. Transmission electron microscopy reveals these colours are due to two near-identical 5-layer distributed Bragg reflectors, one placed either side of the wing membrane. Interestingly the thicknesses of corresponding layers in each distributed Bragg reflector are very similar for all but the second layer from each outer surface. This one key difference creates the significant disparity between the reflected spectra from the distributed Bragg reflectors and the observed colours of either side of the wing. Modelling indicates that modifications to the thickness of this layer alone create a greater change in the peak reflected wavelength than is observed for similar modifications to the thickness of any other layer. This results in an optimised and highly effective pair of semiotic reflector systems, based on extremely comparable design parameters, with relatively low material and biomechanical costs.

Geographic divergence and colour change in response to visual backgrounds and illumination intensity in bearded dragons.

PubMed

Cadena, Viviana; Smith, Kathleen R; Endler, John A; Stuart-Fox, Devi

2017-03-15

Animals may improve camouflage by both dynamic colour change and local evolutionary adaptation of colour but we have little understanding of their relative importance in colour-changing species. We tested for differences in colour change in response to background colour and light intensity in two populations of central bearded dragon lizards ( Pogona vitticeps ) representing the extremes in body coloration and geographical range. We found that bearded dragons change colour in response to various backgrounds and that colour change is affected by illumination intensity. Within-individual colour change was similar in magnitude in the two populations but varied between backgrounds. However, at the endpoints of colour change, each population showed greater similarity to backgrounds that were representative of the local habitat compared with the other population, indicating local adaptation to visual backgrounds. Our results suggest that even in species that change colour, both phenotypic plasticity and geographic divergence of coloration may contribute to improved camouflage. © 2017. Published by The Company of Biologists Ltd.

Colour stabilities of three types of orthodontic clear aligners exposed to staining agents

PubMed Central

Liu, Chen-Lu; Sun, Wen-Tian; Liao, Wen; Lu, Wen-Xin; Li, Qi-Wen; Jeong, Yunho; Liu, Jun; Zhao, Zhi-He

2016-01-01

The aim of this study was to evaluate and compare the colour stabilities of three types of orthodontic clear aligners exposed to staining agents in vitro. Sixty clear orthodontic aligners produced by three manufacturers (Invisalign, Angelalign, and Smartee) were immersed in three staining solutions (coffee, black tea, and red wine) and one control solution (distilled water). After 12-h and 7-day immersions, the aligners were washed in an ultrasonic cleaner and measured with a colourimeter. The colour changes (ΔE*) were calculated on the basis of the Commission Internationale de I'Eclairage L*a*b* colour system (CIE L*a*b*), and the results were then converted into National Bureau of Standards (NBS) units. Fourier transformation infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were conducted to observe the molecular and morphologic alterations to the aligner surfaces, respectively. The three types of aligners exhibited slight colour changes after 12 h of staining, with the exception of the Invisalign aligners stained with coffee. The Invisalign aligners exhibited significantly higher ΔE* values (ranging from 0.30 to 27.81) than those of the Angelalign and Smartee aligners (ΔE* values ranging from 0.33 to 1.89 and 0.32 to 1.61, respectively, P<0.05). FT-IR analysis confirmed that the polymer-based structure of aligners did not exhibit significant chemical differences before and after the immersions. The SEM results revealed different surface alterations to the three types of aligner materials after the 7-day staining. The three types of aesthetic orthodontic appliances exhibited colour stability after the 12-h immersion, with the exception of the Invisalign aligners stained by coffee. The Invisalign aligners were more prone than the Angelalign and Smartee aligners to pigmentation. Aligner materials may be improved by considering aesthetic colour stability properties. PMID:27660048

Colour stabilities of three types of orthodontic clear aligners exposed to staining agents.

PubMed

Liu, Chen-Lu; Sun, Wen-Tian; Liao, Wen; Lu, Wen-Xin; Li, Qi-Wen; Jeong, Yunho; Liu, Jun; Zhao, Zhi-He

2016-12-16

The aim of this study was to evaluate and compare the colour stabilities of three types of orthodontic clear aligners exposed to staining agents in vitro. Sixty clear orthodontic aligners produced by three manufacturers (Invisalign, Angelalign, and Smartee) were immersed in three staining solutions (coffee, black tea, and red wine) and one control solution (distilled water). After 12-h and 7-day immersions, the aligners were washed in an ultrasonic cleaner and measured with a colourimeter. The colour changes (ΔE*) were calculated on the basis of the Commission Internationale de I'Eclairage L*a*b* colour system (CIE L*a*b*), and the results were then converted into National Bureau of Standards (NBS) units. Fourier transformation infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were conducted to observe the molecular and morphologic alterations to the aligner surfaces, respectively. The three types of aligners exhibited slight colour changes after 12 h of staining, with the exception of the Invisalign aligners stained with coffee. The Invisalign aligners exhibited significantly higher ΔE* values (ranging from 0.30 to 27.81) than those of the Angelalign and Smartee aligners (ΔE* values ranging from 0.33 to 1.89 and 0.32 to 1.61, respectively, P<0.05). FT-IR analysis confirmed that the polymer-based structure of aligners did not exhibit significant chemical differences before and after the immersions. The SEM results revealed different surface alterations to the three types of aligner materials after the 7-day staining. The three types of aesthetic orthodontic appliances exhibited colour stability after the 12-h immersion, with the exception of the Invisalign aligners stained by coffee. The Invisalign aligners were more prone than the Angelalign and Smartee aligners to pigmentation. Aligner materials may be improved by considering aesthetic colour stability properties.

Turn the temperature to turquoise: cues for colour change in the male chameleon grasshopper (Kosciuscola tristis) (Orthoptera: Acrididae).

PubMed

Umbers, Kate D L

2011-09-01

Rapid, reversible colour change is unusual in animals, but is a feature of male chameleon grasshoppers (Kosciuscola tristis). Understanding what triggers this colour change is paramount to developing hypotheses explaining its evolutionary significance. In a series of manipulative experiments the author quantified the effects of temperature, and time of day, as well as internal body temperature, on the colour of male K. tristis. The results suggest that male chameleon grasshoppers change colour primarily in response to temperature and that the rate of colour change varies considerably, with the change from black to turquoise occurring up to 10 times faster than the reverse. Body temperature changed quickly (within 10min) in response to changes in ambient temperature, but colour change did not match this speed and thus colour is decoupled from internal temperature. This indicates that male colour change is driven primarily by ambient temperature but that their colour does not necessarily reflect current internal temperature. I propose several functional hypotheses for male colour change in K. tristis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Image Simulation and Assessment of the Colour and Spatial Capabilities of the Colour and Stereo Surface Imaging System (CaSSIS) on the ExoMars Trace Gas Orbiter

NASA Astrophysics Data System (ADS)

Tornabene, Livio L.; Seelos, Frank P.; Pommerol, Antoine; Thomas, Nicholas; Caudill, C. M.; Becerra, Patricio; Bridges, John C.; Byrne, Shane; Cardinale, Marco; Chojnacki, Matthew; Conway, Susan J.; Cremonese, Gabriele; Dundas, Colin M.; El-Maarry, M. R.; Fernando, Jennifer; Hansen, Candice J.; Hansen, Kayle; Harrison, Tanya N.; Henson, Rachel; Marinangeli, Lucia; McEwen, Alfred S.; Pajola, Maurizio; Sutton, Sarah S.; Wray, James J.

2018-02-01

This study aims to assess the spatial and visible/near-infrared (VNIR) colour/spectral capabilities of the 4-band Colour and Stereo Surface Imaging System (CaSSIS) aboard the ExoMars 2016 Trace Grace Orbiter (TGO). The instrument response functions for the CaSSIS imager was used to resample spectral libraries, modelled spectra and to construct spectrally ( i.e., in I/F space) and spatially consistent simulated CaSSIS image cubes of various key sites of interest and for ongoing scientific investigations on Mars. Coordinated datasets from Mars Reconnaissance Orbiter (MRO) are ideal, and specifically used for simulating CaSSIS. The Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) provides colour information, while the Context Imager (CTX), and in a few cases the High-Resolution Imaging Science Experiment (HiRISE), provides the complementary spatial information at the resampled CaSSIS unbinned/unsummed pixel resolution (4.6 m/pixel from a 400-km altitude). The methodology used herein employs a Gram-Schmidt spectral sharpening algorithm to combine the ˜18-36 m/pixel CRISM-derived CaSSIS colours with I/F images primarily derived from oversampled CTX images. One hundred and eighty-one simulated CaSSIS 4-colour image cubes (at 18-36 m/pixel) were generated (including one of Phobos) based on CRISM data. From these, thirty-three "fully"-simulated image cubes of thirty unique locations on Mars ( i.e., with 4 colour bands at 4.6 m/pixel) were made. All simulated image cubes were used to test both the colour capabilities of CaSSIS by producing standard colour RGB images, colour band ratio composites (CBRCs) and spectral parameters. Simulated CaSSIS CBRCs demonstrated that CaSSIS will be able to readily isolate signatures related to ferrous (Fe2+) iron- and ferric (Fe3+) iron-bearing deposits on the surface of Mars, ices and atmospheric phenomena. Despite the lower spatial resolution of CaSSIS when compared to HiRISE, the results of this work demonstrate that CaSSIS will not only compliment HiRISE-scale studies of various geological and seasonal phenomena, it will also enhance them by providing additional colour and geologic context through its wider and longer full-colour coverage (˜9.4 × 50 km), and its increased sensitivity to iron-bearing materials from its two IR bands (RED and NIR). In a few examples, subtle surface changes that were not easily detected by HiRISE were identified in the simulated CaSSIS images. This study also demonstrates the utility of the Gram-Schmidt spectral pan-sharpening technique to extend VNIR colour/spectral capabilities from a lower spatial resolution colour/spectral dataset to a single-band or panchromatic image greyscale image with higher resolution. These higher resolution colour products (simulated CaSSIS or otherwise) are useful as means to extend both geologic context and mapping of datasets with coarser spatial resolutions. The results of this study indicate that the TGO mission objectives, as well as the instrument-specific mission objectives, will be achievable with CaSSIS.

Quality changes in macadamia kernel between harvest and farm-gate.

PubMed

Walton, David A; Wallace, Helen M

2011-02-01

Macadamia integrifolia, Macadamia tetraphylla and their hybrids are cultivated for their edible kernels. After harvest, nuts-in-shell are partially dried on-farm and sorted to eliminate poor-quality kernels before consignment to a processor. During these operations, kernel quality may be lost. In this study, macadamia nuts-in-shell were sampled at five points of an on-farm postharvest handling chain from dehusking to the final storage silo to assess quality loss prior to consignment. Shoulder damage, weight of pieces and unsound kernel were assessed for raw kernels, and colour, mottled colour and surface damage for roasted kernels. Shoulder damage, weight of pieces and unsound kernel for raw kernels increased significantly between the dehusker and the final silo. Roasted kernels displayed a significant increase in dark colour, mottled colour and surface damage during on-farm handling. Significant loss of macadamia kernel quality occurred on a commercial farm during sorting and storage of nuts-in-shell before nuts were consigned to a processor. Nuts-in-shell should be dried as quickly as possible and on-farm handling minimised to maintain optimum kernel quality. 2010 Society of Chemical Industry.

Synchronous and asynchronous perceptual bindings of colour and motion following identical stimulations.

PubMed

McIntyre, Morgan E; Arnold, Derek H

2018-05-01

When a moving surface alternates in colour and direction, perceptual couplings of colour and motion can differ from their physical correspondence. Periods of motion tend to be perceptually bound with physically delayed colours - a colour/motion perceptual asynchrony. This can be eliminated by motion transparency. Here we show that the colour/motion perceptual asynchrony is not invariably eliminated by motion transparency. Nor is it an inevitable consequence given a particular physical input. Instead, it can emerge when moving surfaces are perceived as alternating in direction, even if those surfaces seem transparent, and it is eliminated when surfaces are perceived as moving invariably. For a given observer either situation can result from exposure to a common input. Our findings suggest that neural events that promote the perception of motion reversals are causal of the colour/motion perceptual asynchrony. Moreover, they suggest that motion transparency and coherence can be signalled simultaneously by subpopulations of direction-selective neurons, with this conflict instantaneously resolved by a competitive winner-takes-all interaction, which can instantiate or eliminate colour/motion perceptual asynchrony. Copyright © 2017. Published by Elsevier Ltd.

Effects on colour characteristics of buffalo meat during blooming, retail display and using vitamin C during refrigerated storage.

PubMed

Sen, A R; Muthukumar, M; Naveena, B M; Ramanna, D B V

2014-11-01

Experiments were conducted to determine the effect of blooming, retail display and vitamin C on colour changes/improvement of buffalo meat. To evaluate the effect of blooming, top round cuts of buffalo were allowed to bloom for 60 min. As colour bloomed, a* value increased from 6.47 to 10.01 at 45 min; no further changes occurred. In another study, top round cuts were kept at ambient temperature (36 ± 2 °C) and evaluated for instrumental colour during display. The instrumental redness value (a*) and chroma significantly increased (P < 0.05) after 12 h of display. During storage at refrigerated temperature, treatments consisted of injecting muscle section with 5 % by weight of 0.5, 1 and 2 % vitamin C solutions and a non-injected control (0 %). Each part was evaluated for instrumental colour changes and sensory traits (colour and discoloration score) at 0, 3, 6 and 9th day of refrigerated storage. The a* value (redness) increased significantly in all vitamin C treated buffalo meat samples as compared to control stored at 4 °C. The chroma was significantly higher (P < 0.05) in treated meat as compared to control. Buffalo meat containing vitamin C maintained the desired red meat colour throughout the storage period. The buffalo muscle treated with 2 % vitamin C was more effective in preventing discoloration than treated with 0.5 and 1 % vitamin C. In our study it is evident that as colour bloomed, a* value (redness) increased which indicated that buffalo muscles became redder immediately after exposure to air during blooming and retail display. Vitamin C at levels between 0.5 and 2 % will minimize the rapid discoloration that occurs at the muscle surface. However, 2 % concentration of vitamin C was more effective in minimizing the discoloration and improving colour stability.

To Analyse the Erosive Potential of Commercially Available Drinks on Dental Enamel and Various Tooth Coloured Restorative Materials - An In-vitro Study.

PubMed

Karda, Babita; Jindal, Ritu; Mahajan, Sandeep; Sandhu, Sanam; Sharma, Sunila; Kaur, Rajwinder

2016-05-01

With the enormous change in life style pattern of a common man through the past few decades, there has been proportional variation in the amount and frequency of consumption of drinks. An increased consumption of these drinks will concurrently increase enamel surface roughness by demineralization, resulting in hypersensitivity and elevated caries risk. The present study was designed to evaluate the erosive potential of commercially available drinks on tooth enamel and various tooth coloured restorative materials. Extracted human teeth were taken and divided into four groups i.e. tooth enamel, glass ionomer cement, composite and compomer. Four commercially available drinks were chosen these were Coca -Cola, Nimbooz, Frooti and Yakult. The pH of each drink was measured. Each group was immersed in various experimental drinks for a period of 14 days. The erosive potential of each drink was measured by calculating the change in average surface roughness of these groups after the immersion protocol in various drinks. The data analysis was done by One Way Anova, Post-Hoc Bonferroni, and paired t -test. Group II-GIC showed highest values for mean of change in average surface roughness and the values were statistically significant (p<0.001) with tooth enamel, composite and compomer (p=0.002). Coca-cola showed the highest erosive potential and Yakult showed the lowest, there was no statistical significant difference between the results shown by Yakult and Frooti. Characteristics which may promote erosion of enamel and tooth coloured restorative materials were surface texture of the material and pH of the drinks.

Directional Limits on Motion Transparency Assessed Through Colour-Motion Binding.

PubMed

Maloney, Ryan T; Clifford, Colin W G; Mareschal, Isabelle

2018-03-01

Motion-defined transparency is the perception of two or more distinct moving surfaces at the same retinal location. We explored the limits of motion transparency using superimposed surfaces of randomly positioned dots defined by differences in motion direction and colour. In one experiment, dots were red or green and we varied the proportion of dots of a single colour that moved in a single direction ('colour-motion coherence') and measured the threshold direction difference for discriminating between two directions. When colour-motion coherences were high (e.g., 90% of red dots moving in one direction), a smaller direction difference was required to correctly bind colour with direction than at low coherences. In another experiment, we varied the direction difference between the surfaces and measured the threshold colour-motion coherence required to discriminate between them. Generally, colour-motion coherence thresholds decreased with increasing direction differences, stabilising at direction differences around 45°. Different stimulus durations were compared, and thresholds were higher at the shortest (150 ms) compared with the longest (1,000 ms) duration. These results highlight different yet interrelated aspects of the task and the fundamental limits of the mechanisms involved: the resolution of narrowly separated directions in motion processing and the local sampling of dot colours from each surface.

Map presentation of changes in Europe's artificial surfaces for the periods 1990-2000 and 2000-2006

NASA Astrophysics Data System (ADS)

Feranec, Jan; Soukup, Tomas

2013-06-01

The landscapes of the world are constantly changing under the influence of human activities leading to the growth of artificial surfaces. The covering of soil by artificial surfaces is referred to as soil sealing. Aerial and satellite images or data derived from them (for instance CORINE land cover — CLC data used here) provide important information that makes it possible to assess the occurrence, area and rate of soil sealing. As the term sealed soil cannot be wholly identified with the content of the appropriate CLC classes, the term land cover flow urbanization (LCFU) will be used here. The essence of this study is the demonstration and documentation of the trends of the LCFU in Europe for the periods 1990-2000 and 2000-2006 on a single map. This may contribute to a better spatial awareness of the ongoing transformation of landscape under the effects of human activities in an pan-European context. Changes in the LCFU can be seen on a map, compiled from 3 × 3 km squares at an all-European scale, using colours and their hues, to fulfil the role both of identification and classification. The colour method employed makes it possible to perceive three groups of LCFU changes on two time horizons, that is, whether the rate of LCFU in 2000-2006 increased or remained the same (hues of red); or dropped compared to the 1990-2000 period (hues of light to dark blue). The third group represents the LCFU with rates higher or lower than the average (countries with changes recorded in only one time horizon are presented in dark and light magenta colours).

Image simulation and assessment of the colour and spatial capabilities of the Colour and Stereo Surface Imaging System (CaSSIS) on the ExoMars Trace Gas Orbiter

USGS Publications Warehouse

Tornabene, Livio L.; Seelos, Frank P.; Pommerol, Antoine; Thomas, Nicolas; Caudill, Christy M.; Becerra, Patricio; Bridges, John C.; Byrne, Shane; Cardinale, Marco; Chojnacki, Matthew; Conway, Susan J.; Cremonese, Gabriele; Dundas, Colin M.; El-Maarry, M. R.; Fernando, Jennifer; Hansen, Candice J.; Hansen, Kayle; Harrison, Tanya N.; Henson, Rachel; Marinangeli, Lucia; McEwen, Alfred S.; Pajola, Maurizio; Sutton, Sarah S.; Wray, James J.

2018-01-01

This study aims to assess the spatial and visible/near-infrared (VNIR) colour/spectral capabilities of the 4-band Colour and Stereo Surface Imaging System (CaSSIS) aboard the ExoMars 2016 Trace Grace Orbiter (TGO). The instrument response functions for the CaSSIS imager was used to resample spectral libraries, modelled spectra and to construct spectrally (i.e., in I/F space) and spatially consistent simulated CaSSIS image cubes of various key sites of interest and for ongoing scientific investigations on Mars. Coordinated datasets from Mars Reconnaissance Orbiter (MRO) are ideal, and specifically used for simulating CaSSIS. The Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) provides colour information, while the Context Imager (CTX), and in a few cases the High-Resolution Imaging Science Experiment (HiRISE), provides the complementary spatial information at the resampled CaSSIS unbinned/unsummed pixel resolution (4.6 m/pixel from a 400-km altitude). The methodology used herein employs a Gram-Schmidt spectral sharpening algorithm to combine the ∼18–36 m/pixel CRISM-derived CaSSIS colours with I/F images primarily derived from oversampled CTX images. One hundred and eighty-one simulated CaSSIS 4-colour image cubes (at 18–36 m/pixel) were generated (including one of Phobos) based on CRISM data. From these, thirty-three “fully”-simulated image cubes of thirty unique locations on Mars (i.e., with 4 colour bands at 4.6 m/pixel) were made. All simulated image cubes were used to test both the colour capabilities of CaSSIS by producing standard colour RGB images, colour band ratio composites (CBRCs) and spectral parameters. Simulated CaSSIS CBRCs demonstrated that CaSSIS will be able to readily isolate signatures related to ferrous (Fe2+) iron- and ferric (Fe3+) iron-bearing deposits on the surface of Mars, ices and atmospheric phenomena. Despite the lower spatial resolution of CaSSIS when compared to HiRISE, the results of this work demonstrate that CaSSIS will not only compliment HiRISE-scale studies of various geological and seasonal phenomena, it will also enhance them by providing additional colour and geologic context through its wider and longer full-colour coverage (∼9.4×50">∼9.4×50∼9.4×50 km), and its increased sensitivity to iron-bearing materials from its two IR bands (RED and NIR). In a few examples, subtle surface changes that were not easily detected by HiRISE were identified in the simulated CaSSIS images. This study also demonstrates the utility of the Gram-Schmidt spectral pan-sharpening technique to extend VNIR colour/spectral capabilities from a lower spatial resolution colour/spectral dataset to a single-band or panchromatic image greyscale image with higher resolution. These higher resolution colour products (simulated CaSSIS or otherwise) are useful as means to extend both geologic context and mapping of datasets with coarser spatial resolutions. The results of this study indicate that the TGO mission objectives, as well as the instrument-specific mission objectives, will be achievable with CaSSIS.

Plasmonic colour generation

NASA Astrophysics Data System (ADS)

Kristensen, Anders; Yang, Joel K. W.; Bozhevolnyi, Sergey I.; Link, Stephan; Nordlander, Peter; Halas, Naomi J.; Mortensen, N. Asger

2017-01-01

Plasmonic colours are structural colours that emerge from resonant interactions between light and metallic nanostructures. The engineering of plasmonic colours is a promising, rapidly emerging research field that could have a large technological impact. We highlight basic properties of plasmonic colours and recent nanofabrication developments, comparing technology-performance indicators for traditional and nanophotonic colour technologies. The structures of interest include diffraction gratings, nanoaperture arrays, thin films, and multilayers and structures that support Mie resonances and whispering-gallery modes. We discuss plasmonic colour nanotechnology based on localized surface plasmon resonances, such as gap plasmons and hybridized disk-hole plasmons, which allow for colour printing with sub-diffraction resolution. We also address a range of fabrication approaches that enable large-area printing and nanoscale lithography compatible with complementary metal-oxide semiconductor technologies, including nanoimprint lithography and self-assembly. Finally, we review recent developments in dynamically reconfigurable plasmonic colours and in the laser-induced post-processing of plasmonic colour surfaces.

Costs of colour change in fish: food intake and behavioural decisions.

PubMed

Rodgers, Gwendolen M; Gladman, Nicholas W; Corless, Hannah F; Morrell, Lesley J

2013-07-15

Many animals, particularly reptiles, amphibians, fish and cephalopods, have the ability to change their body colour, for functions including thermoregulation, signalling and predator avoidance. Many fish plastically darken their body colouration in response to dark visual backgrounds, and this functions to reduce predation risk. Here, we tested the hypotheses that colour change in fish (1) carries with it an energetic cost and (2) affects subsequent shoal and habitat choice decisions. We demonstrate that guppies (Poecilia reticulata) change colour in response to dark and light visual backgrounds, and that doing so carries an energetic cost in terms of food consumption. By increasing food intake, however, guppies are able to maintain growth rates and meet the energetic costs of changing colour. Following colour change, fish preferentially choose habitats and shoals that match their own body colouration, and maximise crypsis, thus avoiding the need for further colour change but also potentially paying an opportunity cost associated with restriction to particular habitats and social associates. Thus, colour change to match the background is complemented by behavioural strategies, which should act to maximise fitness in variable environments.

Biomimetic superwettable materials with structural colours.

PubMed

Wang, Zelinlan; Guo, Zhiguang

2017-12-05

Structural colours and superwettability are of great interest due to their unique characteristics. However, the application of materials with either structural colours or superwettability is limited. Moreover, materials possessing both structural colours and superwettability are crucial for many practical applications. The combination of structural colours and superwettability can result in materials for use various applications, such as in sensors, detectors, bioassays, anti-counterfeiting, and liquid actuators, by controlling surfaces to repel or absorb liquids. Regarding superwettability and structural colours, surface texture and chemical composition are two factors for the construction of materials with superwettable structural colours. This review aims at offering a comprehensive elaboration of the mechanism, recent biomimetic research, and applications of biomimetic superwettable materials with structural colours. Furthermore, this review provides significant insight into the design, fabrication, and application of biomimetic superwettable materials with structural colours.

Camouflage through colour change: mechanisms, adaptive value and ecological significance

PubMed Central

Flores, Augusto A. V.

2017-01-01

Animals from a wide range of taxonomic groups are capable of colour change, of which camouflage is one of the main functions. A considerable amount of past work on this subject has investigated species capable of extremely rapid colour change (in seconds). However, relatively slow colour change (over hours, days, weeks and months), as well as changes arising via developmental plasticity are probably more common than rapid changes, yet less studied. We discuss three key areas of colour change and camouflage. First, we review the mechanisms underpinning colour change and developmental plasticity for camouflage, including cellular processes, visual feedback, hormonal control and dietary factors. Second, we discuss the adaptive value of colour change for camouflage, including the use of different camouflage types. Third, we discuss the evolutionary–ecological implications of colour change for concealment, including what it can tell us about intraspecific colour diversity, morph-specific strategies, and matching to different environments and microhabitats. Throughout, we discuss key unresolved questions and present directions for future work, and highlight how colour change facilitates camouflage among habitats and arises when animals are faced with environmental changes occurring over a range of spatial and temporal scales. This article is part of the themed issue ‘Animal coloration: production, perception, function and application’. PMID:28533459

Camouflage through colour change: mechanisms, adaptive value and ecological significance.

PubMed

Duarte, Rafael C; Flores, Augusto A V; Stevens, Martin

2017-07-05

Animals from a wide range of taxonomic groups are capable of colour change, of which camouflage is one of the main functions. A considerable amount of past work on this subject has investigated species capable of extremely rapid colour change (in seconds). However, relatively slow colour change (over hours, days, weeks and months), as well as changes arising via developmental plasticity are probably more common than rapid changes, yet less studied. We discuss three key areas of colour change and camouflage. First, we review the mechanisms underpinning colour change and developmental plasticity for camouflage, including cellular processes, visual feedback, hormonal control and dietary factors. Second, we discuss the adaptive value of colour change for camouflage, including the use of different camouflage types. Third, we discuss the evolutionary-ecological implications of colour change for concealment, including what it can tell us about intraspecific colour diversity, morph-specific strategies, and matching to different environments and microhabitats. Throughout, we discuss key unresolved questions and present directions for future work, and highlight how colour change facilitates camouflage among habitats and arises when animals are faced with environmental changes occurring over a range of spatial and temporal scales.This article is part of the themed issue 'Animal coloration: production, perception, function and application'. © 2017 The Authors.

Colour change of twig-mimicking peppered moth larvae is a continuous reaction norm that increases camouflage against avian predators

PubMed Central

Rowland, Hannah M.; Edmonds, Nicola; Saccheri, Ilik J.

2017-01-01

Camouflage, and in particular background-matching, is one of the most common anti-predator strategies observed in nature. Animals can improve their match to the colour/pattern of their surroundings through background selection, and/or by plastic colour change. Colour change can occur rapidly (a few seconds), or it may be slow, taking hours to days. Many studies have explored the cues and mechanisms behind rapid colour change, but there is a considerable lack of information about slow colour change in the context of predation: the cues that initiate it, and the range of phenotypes that are produced. Here we show that peppered moth (Biston betularia) larvae respond to colour and luminance of the twigs they rest on, and exhibit a continuous reaction norm of phenotypes. When presented with a heterogeneous environment of mixed twig colours, individual larvae specialise crypsis towards one colour rather than developing an intermediate colour. Flexible colour change in this species has likely evolved in association with wind dispersal and polyphagy, which result in caterpillars settling and feeding in a diverse range of visual environments. This is the first example of visually induced slow colour change in Lepidoptera that has been objectively quantified and measured from the visual perspective of natural predators. PMID:29158965

Colour change of twig-mimicking peppered moth larvae is a continuous reaction norm that increases camouflage against avian predators.

PubMed

Eacock, Amy; Rowland, Hannah M; Edmonds, Nicola; Saccheri, Ilik J

2017-01-01

Camouflage, and in particular background-matching, is one of the most common anti-predator strategies observed in nature. Animals can improve their match to the colour/pattern of their surroundings through background selection, and/or by plastic colour change. Colour change can occur rapidly (a few seconds), or it may be slow, taking hours to days. Many studies have explored the cues and mechanisms behind rapid colour change, but there is a considerable lack of information about slow colour change in the context of predation: the cues that initiate it, and the range of phenotypes that are produced. Here we show that peppered moth ( Biston betularia ) larvae respond to colour and luminance of the twigs they rest on, and exhibit a continuous reaction norm of phenotypes. When presented with a heterogeneous environment of mixed twig colours, individual larvae specialise crypsis towards one colour rather than developing an intermediate colour. Flexible colour change in this species has likely evolved in association with wind dispersal and polyphagy, which result in caterpillars settling and feeding in a diverse range of visual environments. This is the first example of visually induced slow colour change in Lepidoptera that has been objectively quantified and measured from the visual perspective of natural predators.

To Analyse the Erosive Potential of Commercially Available Drinks on Dental Enamel and Various Tooth Coloured Restorative Materials – An In-vitro Study

PubMed Central

Jindal, Ritu; Mahajan, Sandeep; Sandhu, Sanam; Sharma, Sunila; Kaur, Rajwinder

2016-01-01

Introduction With the enormous change in life style pattern of a common man through the past few decades, there has been proportional variation in the amount and frequency of consumption of drinks. An increased consumption of these drinks will concurrently increase enamel surface roughness by demineralization, resulting in hypersensitivity and elevated caries risk. Aim The present study was designed to evaluate the erosive potential of commercially available drinks on tooth enamel and various tooth coloured restorative materials. Materials and Methods Extracted human teeth were taken and divided into four groups i.e. tooth enamel, glass ionomer cement, composite and compomer. Four commercially available drinks were chosen these were Coca -Cola, Nimbooz, Frooti and Yakult. The pH of each drink was measured. Each group was immersed in various experimental drinks for a period of 14 days. The erosive potential of each drink was measured by calculating the change in average surface roughness of these groups after the immersion protocol in various drinks. The data analysis was done by One Way Anova, Post-Hoc Bonferroni, and paired t –test. Results Group II-GIC showed highest values for mean of change in average surface roughness and the values were statistically significant (p<0.001) with tooth enamel, composite and compomer (p=0.002). Coca-cola showed the highest erosive potential and Yakult showed the lowest, there was no statistical significant difference between the results shown by Yakult and Frooti. Conclusion Characteristics which may promote erosion of enamel and tooth coloured restorative materials were surface texture of the material and pH of the drinks. PMID:27437343

A circumzenithal arc to study optics concepts with geometrical optics

NASA Astrophysics Data System (ADS)

Isik, Hakan

2017-05-01

This paper describes the formation of a circumzenithal arc for the purpose of teaching light and optics. A circumzenithal arc, an optic formation rarely witnessed by people, is formed in this study using a water-filled cylindrical glass illuminated by sunlight. Sunlight refracted at the top and side surfaces of the glass of water is dispersed into its constituent colours. First, multi-colour arcs are observed on paper at the bottom of the glass. Then, a single arc for each colour is observed on the floor when the rays are allowed to propagate to the furthest points from the glass. The change in observations is explained by formulating an equation for the geometry of the situation. The formula relates each point on the first refracting surface for an incoming light ray to a point further from the second refracting surface. Then, a parallel graph is drawn to visualize the superposition of colours to the formation of a single arc. The geometrical optics studies in this paper exemplify the concept of Snell’s law, total internal reflection and dispersion. The duration of the observation on a circumzenithal arc is limited by the altitude of the Sun in the sky. This study depends on the use of astronomy software to track solar altitude. Pedagogical aspects of the study are discussed for inquiry-based teaching and learning of light and optics concepts.

Colorimetric analysis of pigmented skin lesions: a pilot study with the Visi-Chroma VC-100 device.

PubMed

Vereecken, P; Mommaerts, M; Duez, C; Petein, M; Laporte, M; Hubinon, J-L; Heenen, M

2006-01-01

Definition of the colour of pigmented skin lesions (PSLs) with the naked eye remains subjective and may be influenced by lighting. This problem underlines the usefulness of instrumental assessments such as epiluminescence microscopy and colorimetric devices. We describe here a new method of colour analysis of PSLs with the Visi-Chroma VC-100 device, which illuminates the surface of the skin with white light-emitting diodes (LEDs) and analyses the reflected light by a red-green-blue (RGB) charge-coupled device (CCD) colour camera. Twenty-one PSLs to be excised for cosmetic or medical reasons were analysed by this device with clinicopathological correlation. This method is feasible and might be useful to assess the colour of PSLs and allow comparisons for changes over time. Further studies are needed to determine the usefulness of this device in clinical practice.

Gradient Evolution of Body Colouration in Surface- and Cave-Dwelling Poecilia mexicana and the Role of Phenotype-Assortative Female Mate Choice

PubMed Central

Penshorn, Marina; Hamfler, Sybille; Herbert, Denise B.; Appel, Jessica; Meyer, Philipp; Slattery, Patrick; Charaf, Sarah; Wolf, Raoul; Völker, Johannes; Berger, Elisabeth A. M.; Dröge, Janis; Riesch, Rüdiger; Arias-Rodriguez, Lenin; Indy, Jeanne R.; Plath, Martin

2013-01-01

Ecological speciation assumes reproductive isolation to be the product of ecologically based divergent selection. Beside natural selection, sexual selection via phenotype-assortative mating is thought to promote reproductive isolation. Using the neotropical fish Poecilia mexicana from a system that has been described to undergo incipient ecological speciation in adjacent, but ecologically divergent habitats characterized by the presence or absence of toxic H2S and darkness in cave habitats, we demonstrate a gradual change in male body colouration along the gradient of light/darkness, including a reduction of ornaments that are under both inter- and intrasexual selection in surface populations. In dichotomous choice tests using video-animated stimuli, we found surface females to prefer males from their own population over the cave phenotype. However, female cave fish, observed on site via infrared techniques, preferred to associate with surface males rather than size-matched cave males, likely reflecting the female preference for better-nourished (in this case: surface) males. Hence, divergent selection on body colouration indeed translates into phenotype-assortative mating in the surface ecotype, by selecting against potential migrant males. Female cave fish, by contrast, do not have a preference for the resident male phenotype, identifying natural selection against migrants imposed by the cave environment as the major driver of the observed reproductive isolation. PMID:24175282

Effects of hair sprays on colour perception: a hyperspectral imaging approach to shine and chroma on heads.

PubMed

Puccetti, G; Thompson, W

2017-04-01

Hair sprays apply fixative ingredients to provide hold to a hair style as well as weather resistance and optical properties such as shine. Generally, sprays distribute fine particles containing polymeric ingredients to form a thin film on the surface of hair. Different hair types require different strengths of the formed deposit on the hair surface. The present study shows how sprays also alter the visibility of the hair colour by altering the surface topology of the hair fibres. Hyperspectral imaging is used to map spectral characteristics of hair on mannequins and panelists over the curvature of heads. Spectral and spatial characteristics are measured before and after hair spray applications. The hair surface is imaged by SEM to visualize the degree of cuticle coverage. Finally, the perception of hair colour was evaluated on red-coloured mannequins by consumer questionnaire. Hair sprays deposit different degrees of fixatives, which lead to a progressive leveling of the cuticle natural tilt angle with respect to the fibre axis. As a result, shine is progressively shifting towards the region of hair colour visibility and decreases the perceived colour of hair seen by consumers. Lighter sprays show thinner film formation on the hair surface and less of a shine shift than strong hold hair sprays. Hair sprays are generally employed for hair style hold and weather resistance and considered without effect on hair colour. Our approach shows that spray-deposited films can affect colour perception by altering the microstructure of the hair surface. Thin films deposited on the hair fibre surface can partially fill gaps between cuticles, which reduces the cuticle natural angle. This partial erasure results in a angle shift of the shine regions towards the angle of internal reflection, thus decreasing the perceived hair colour regions as experienced by a group of consumers. © 2016 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Effects of colour on preview search: anticipatory and inhibitory biases for colour.

PubMed

Braithwaite, Jason J; Humphreys, Glyn W; Hodsoll, John

2004-01-01

Two experiments are reported examining the effects of colour grouping, colour change and target colour foreknowledge under preview search conditions (Watson and Humphreys, 1997). In Experiment 1 we manipulated the colour homogeneity of the old items at initial presentation, and the colour these items subsequently changed into. In all cases participants knew the colour of the target. We found that when the old items changed into the same colour as the new search set, search performance was affected. In Experiment 2 participants did not know the colour of the target. Here we found evidence for a negative colour-based carry-over effect that slowed search for new targets carrying the colour of the old items. This occurred even when the old items changed their original colour and the new target was a singleton. Collectively the results suggest an important role for both colour grouping and colour-based inhibition in the successful rejection of old distractors. The consequence of this, however, is that new stimuli that may carry the critical attribute may take longer to detect. We discuss the results in relation to prior 'feature-blind' accounts of preview effects on visual search.

Colour change on different body regions provides thermal and signalling advantages in bearded dragon lizards

PubMed Central

Cadena, Viviana; Porter, Warren P.; Kearney, Michael R.

2016-01-01

Many terrestrial ectotherms are capable of rapid colour change, yet it is unclear how these animals accommodate the multiple functions of colour, particularly camouflage, communication and thermoregulation, especially when functions require very different colours. Thermal benefits of colour change depend on an animal's absorptance of solar energy in both UV–visible (300–700 nm) and near-infrared (NIR; 700–2600 nm) wavelengths, yet colour research has focused almost exclusively on the former. Here, we show that wild-caught bearded dragon lizards (Pogona vitticeps) exhibit substantial UV–visible and NIR skin reflectance change in response to temperature for dorsal but not ventral (throat and upper chest) body regions. By contrast, lizards showed the greatest temperature-independent colour change on the beard and upper chest during social interactions and as a result of circadian colour change. Biophysical simulations of heat transfer predicted that the maximum temperature-dependent change in dorsal reflectivity could reduce the time taken to reach active body temperature by an average of 22 min per active day, saving 85 h of basking time throughout the activity season. Our results confirm that colour change may serve a thermoregulatory function, and competing thermoregulation and signalling requirements may be met by partitioning colour change to different body regions in different circumstances.

Application of Artificial Neural Network to Predict Colour Change, Shrinkage and Texture of Osmotically Dehydrated Pumpkin

NASA Astrophysics Data System (ADS)

Tang, S. Y.; Lee, J. S.; Loh, S. P.; Tham, H. J.

2017-06-01

The objectives of this study were to use Artificial Neural Network (ANN) to predict colour change, shrinkage and texture of osmotically dehydrated pumpkin slices. The effects of process variables such as concentration of osmotic solution, immersion temperature and immersion time on the above mentioned physical properties were studied. The colour of the samples was measured using a colorimeter and the net colour difference changes, ΔE were determined. The texture was measured in terms of hardness by using a Texture Analyzer. As for the shrinkage, displacement of volume method was applied and percentage of shrinkage was obtained in terms of volume changes. A feed-forward backpropagation network with sigmoidal function was developed and best network configuration was chosen based on the highest correlation coefficients between the experimental values versus predicted values. As a comparison, Response Surface Methodology (RSM) statistical analysis was also employed. The performances of both RSM and ANN modelling were evaluated based on absolute average deviation (AAD), correlation of determination (R2) and root mean square error (RMSE). The results showed that ANN has higher prediction capability as compared to RSM. The relative importance of the variables on the physical properties were also determined by using connection weight approach in ANN. It was found that solution concentration showed the highest influence on all three physical properties.

Reversible colour change in Arthropoda.

PubMed

Umbers, Kate D L; Fabricant, Scott A; Gawryszewski, Felipe M; Seago, Ainsley E; Herberstein, Marie E

2014-11-01

The mechanisms and functions of reversible colour change in arthropods are highly diverse despite, or perhaps due to, the presence of an exoskeleton. Physiological colour changes, which have been recorded in 90 arthropod species, are rapid and are the result of changes in the positioning of microstructures or pigments, or in the refractive index of layers in the integument. By contrast, morphological colour changes, documented in 31 species, involve the anabolism or catabolism of components (e.g. pigments) directly related to the observable colour. In this review we highlight the diversity of mechanisms by which reversible colour change occurs and the evolutionary context and diversity of arthropod taxa in which it has been observed. Further, we discuss the functions of reversible colour change so far proposed, review the limited behavioural and ecological data, and argue that the field requires phylogenetically controlled approaches to understanding the evolution of reversible colour change. Finally, we encourage biologists to explore new model systems for colour change and to engage scientists from other disciplines; continued cross-disciplinary collaboration is the most promising approach to this nexus of biology, physics, and chemistry. © 2014 The Authors. Biological Reviews © 2014 Cambridge Philosophical Society.

Quantitative studies of animal colour constancy: using the chicken as model

PubMed Central

2016-01-01

Colour constancy is the capacity of visual systems to keep colour perception constant despite changes in the illumination spectrum. Colour constancy has been tested extensively in humans and has also been described in many animals. In humans, colour constancy is often studied quantitatively, but besides humans, this has only been done for the goldfish and the honeybee. In this study, we quantified colour constancy in the chicken by training the birds in a colour discrimination task and testing them in changed illumination spectra to find the largest illumination change in which they were able to remain colour-constant. We used the receptor noise limited model for animal colour vision to quantify the illumination changes, and found that colour constancy performance depended on the difference between the colours used in the discrimination task, the training procedure and the time the chickens were allowed to adapt to a new illumination before making a choice. We analysed literature data on goldfish and honeybee colour constancy with the same method and found that chickens can compensate for larger illumination changes than both. We suggest that future studies on colour constancy in non-human animals could use a similar approach to allow for comparison between species and populations. PMID:27170714

A three-colour graph as a complete topological invariant for gradient-like diffeomorphisms of surfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grines, V Z; Pochinka, O V; Kapkaeva, S Kh

In a paper of Oshemkov and Sharko, three-colour graphs were used to make the topological equivalence of Morse-Smale flows on surfaces obtained by Peixoto more precise. In the present paper, in the language of three-colour graphs equipped with automorphisms, we obtain a complete (including realization) topological classification of gradient-like cascades on surfaces. Bibliography: 25 titles.

An experience of electron beam (EB) irradiated gemstones in Malaysian nuclear agency

NASA Astrophysics Data System (ADS)

Idris, Sarada; Hairaldin, Siti Zulaiha; Tajau, Rida; Karim, Jamilah; Jusoh, Suhaimi; Ghazali, Zulkafli; Ahmad, Shamshad

2014-02-01

In Nuclear Malaysia, a study on gemstone irradiation using beta particle is conducted. The purpose of the study is to evaluate the gemstone colour enhancement by using different kind of precious and non-precious gemstones. By using irradiation technique, selected gemstones are exposed to highly ionizing radiation electron beam to knock off electrons to generate colour centres culminating in the introduction of deeper colours. The colour centres may be stable or unstable depending on the nature of colour centre produced. The colour change of irradiated stones were measured by HunterLab colour measurement. At 50 kGy, Topaz shows changes colour from colourless to golden. Meanwhile pearl shows changes from pale colour to grey. Kunzite and amethyst shows colour changes from colorless to green and pale colour to purple. Gamma survey meter measurement confirmed that irradiation treatment with 3 MeV electron beam machine does not render any activation that activate the gems to become radioactive.

An experience of electron beam (EB) irradiated gemstones in Malaysian nuclear agency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Idris, Sarada, E-mail: sarada@nuclearmalaysia.gov.my; Hairaldin, Siti Zulaiha, E-mail: sarada@nuclearmalaysia.gov.my; Tajau, Rida, E-mail: sarada@nuclearmalaysia.gov.my

In Nuclear Malaysia, a study on gemstone irradiation using beta particle is conducted. The purpose of the study is to evaluate the gemstone colour enhancement by using different kind of precious and non-precious gemstones. By using irradiation technique, selected gemstones are exposed to highly ionizing radiation electron beam to knock off electrons to generate colour centres culminating in the introduction of deeper colours. The colour centres may be stable or unstable depending on the nature of colour centre produced. The colour change of irradiated stones were measured by HunterLab colour measurement. At 50 kGy, Topaz shows changes colour from colourlessmore » to golden. Meanwhile pearl shows changes from pale colour to grey. Kunzite and amethyst shows colour changes from colorless to green and pale colour to purple. Gamma survey meter measurement confirmed that irradiation treatment with 3 MeV electron beam machine does not render any activation that activate the gems to become radioactive.« less

Earth's colour unchanged since 1967: results from earthshine observations

NASA Astrophysics Data System (ADS)

Thejll, Peter; Flynn, Chris; Gleisner, Hans; Schwarz, Henriette

2014-05-01

The colour of Earthlight is a function of atmospheric, surface and ocean conditions because each scatters light in a characteristic way. The colour of Earth can in principle be determined and monitored from satellites - but geostationary satellites do not observe in multiple visual bands, and low Earth orbit platforms do not provide instantaneous colour pictures of the terrestrial disc. Observations of the dark side of the Moon - illuminated by earthlight - can be used to determine the terrestrial colour, and was done accurately in 1967 with astronomical photometric techniques. Until now, such techniques have not been re-applied. We report on multi-band visual photometry of the earthshine in 2011/2012. Scattered light in the atmosphere and the equipment is a difficult issue to circumvent - but for a unique pair of observations in the Johnson B and V bands we have a situation where scattered light cancels closely and thus we can estimate the Johnson B-V colours of the earthshine itself. By arguing on the basis of changes in reflected sunlight we can estimate the colour of the earthlight striking the Moon - and hence the colour of the Earth at that particular time. We find good agreement with the a measurement performed 47 years previously, and broad agreement with historic measurements from the 1920s and 30s. This similarity has fundamental consequences for the climate system feedback mechanisms, discussed in this poster.

A curved surface micro-moiré method and its application in evaluating curved surface residual stress

NASA Astrophysics Data System (ADS)

Zhang, Hongye; Wu, Chenlong; Liu, Zhanwei; Xie, Huimin

2014-09-01

The moiré method is typically applied to the measurement of deformations of a flat surface while, for a curved surface, this method is rarely used other than for projection moiré or moiré interferometry. Here, a novel colour charge-coupled device (CCD) micro-moiré method has been developed, based on which a curved surface micro-moiré (CSMM) method is proposed with a colour CCD and optical microscope (OM). In the CSMM method, no additional reference grating is needed as a Bayer colour filter array (CFA) installed on the OM in front of the colour CCD image sensor performs this role. Micro-moiré fringes with high contrast are directly observed with the OM through the Bayer CFA under the special condition of observing a curved specimen grating. The principle of the CSMM method based on a colour CCD micro-moiré method and its application range and error analysis are all described in detail. In an experiment, the curved surface residual stress near a welded seam on a stainless steel tube was investigated using the CSMM method.

Evaluation of browning ratio in an image analysis of apple slices at different stages of instant controlled pressure drop-assisted hot-air drying (AD-DIC).

PubMed

Gao, Kun; Zhou, Linyan; Bi, Jinfeng; Yi, Jianyong; Wu, Xinye; Zhou, Mo; Wang, Xueyuan; Liu, Xuan

2017-06-01

Computer vision-based image analysis systems are widely used in food processing to evaluate quality changes. They are able to objectively measure the surface colour of various products since, providing some obvious advantages with their objectivity and quantitative capabilities. In this study, a computer vision-based image analysis system was used to investigate the colour changes of apple slices dried by instant controlled pressure drop-assisted hot air drying (AD-DIC). The CIE L* value and polyphenol oxidase activity in apple slices decreased during the entire drying process, whereas other colour indexes, including CIE a*, b*, ΔE and C* values, increased. The browning ratio calculated by image analysis increased during the drying process, and a sharp increment was observed for the DIC process. The change in 5-hydroxymethylfurfural (5-HMF) and fluorescent compounds (FIC) showed the same trend with browning ratio due to Maillard reaction. Moreover, the concentrations of 5-HMF and FIC both had a good quadratic correlation (R 2  > 0.998) with the browning ratio. Browning ratio was a reliable indicator of 5-HMF and FIC changes in apple slices during drying. The image analysis system could be used to monitor colour changes, 5-HMF and FIC in dehydrated apple slices during the AD-DIC process. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Morphological and colour morph clines along an altitudinal gradient in the meadow grasshopper Pseudochorthippus parallelus.

PubMed

Köhler, Günter; Samietz, Jörg; Schielzeth, Holger

2017-01-01

Many animals show altitudinal clines in size, shape and body colour. Increases in body size and reduction in the length of body appendices in colder habitats are usually attributed to improved heat conservation at lower surface-to-volume ratios (known as Bergmann's and Allen's rule, respectively). However, the patterns are more variable and sometimes reversed in small ectotherms that are affected by shortened growing seasons. Altitude can also affect colouration. The thermal melanism hypothesis predicts darker colours under cooler conditions because of a thermoregulatory advantage. Darker colours may also be favoured at high altitudes for reasons of UV protection or habitat-dependent crypsis. We studied altitudinal variation in morphology and colour in the colour-polymorphic meadow grasshopper Pseudochorthippus parallelus based on 563 individuals from 17 populations sampled between 450 and 2,500 m asl. Pronotum length did not change with altitude, while postfemur length decreased significantly in both sexes. Tegmen (forewing) length decreased in males, but not in females. The results indicate that while body size, as best quantified by pronotum length, was remarkably constant, extended appendices were reduced at high altitudes. The pattern thus follows Allen's rule, but neither Bergmann's nor converse Bergmann's rule. These results indicate that inference of converse Bergmann's rule based on measurements from appendices should be treated with some caution. Colour morph ratios showed significant changes in both sexes from lowland populations dominated by green individuals to high-altitude populations dominated by brown ones. The increase of brown morphs was particularly steep between 1,500 and 2,000 m asl. The results suggest shared control of colour in males and females and local adaptation along the altitudinal gradient following the predictions of the thermal melanism hypothesis. Interestingly, both patterns, the reduction of body appendices and the higher frequency of brown individuals, may be explained by a need for efficient thermoregulation under high-altitude conditions.

Seasonal Changes in Colour: A Comparison of Structural, Melanin- and Carotenoid-Based Plumage Colours

PubMed Central

Delhey, Kaspar; Burger, Claudia; Fiedler, Wolfgang; Peters, Anne

2010-01-01

Background Plumage coloration is important for bird communication, most notably in sexual signalling. Colour is often considered a good quality indicator, and the expression of exaggerated colours may depend on individual condition during moult. After moult, plumage coloration has been deemed fixed due to the fact that feathers are dead structures. Still, many plumage colours change after moult, although whether this affects signalling has not been sufficiently assessed. Methodology/Principal Findings We studied changes in coloration after moult in four passerine birds (robin, Erithacus rubecula; blackbird, Turdus merula; blue tit, Cyanistes caeruleus; and great tit, Parus major) displaying various coloration types (melanin-, carotenoid-based and structural). Birds were caught regularly during three years to measure plumage reflectance. We used models of avian colour vision to derive two variables, one describing chromatic and the other achromatic variation over the year that can be compared in magnitude among different colour types. All studied plumage patches but one (yellow breast of the blue tit) showed significant chromatic changes over the year, although these were smaller than for a typical dynamic trait (bill colour). Overall, structural colours showed a reduction in relative reflectance at shorter wavelengths, carotenoid-based colours the opposite pattern, while no general pattern was found for melanin-based colours. Achromatic changes were also common, but there were no consistent patterns of change for the different types of colours. Conclusions/Significance Changes of plumage coloration independent of moult are probably widespread; they should be perceivable by birds and have the potential to affect colour signalling. PMID:20644723

New model for colour kinetics of plum under infrared vacuum condition and microwave drying.

PubMed

Chayjan, Reza Amiri; Alaei, Behnam

2016-01-01

Quality of dried foods is affected by the drying method and physiochemical changes in tissue. The drying method affects properties such as colour. The colour of processed food is one of the most important quality indices and plays a determinant role in consumer acceptability of food materials and the processing method. The colour of food materials can be used as an indirect factor to determine changes in quality, since it is simpler and faster than chemical methods. The study focused on the kinetics of colour changes of plum slices, under infrared vacuum and microwave conditions. Drying the samples was implemented at the absolute pressures of 20 and 60 kPa, drying temperatures of 50 and 60°C and microwave power of 90, 270, 450 and 630 W. Colour changes were quantified by the tri-stimulus L* (whiteness/darkness), a* (redness/greenness) and b* (yellowness/blueness) model, which is an international standard for color measurement developed by the Commission Internationale d'Eclairage (CIE). These values were also used to calculate total colour change (∆E), chroma, hue angle, and browning index (BI). A new model was used for mathematical modelling of colour change kinetics. The drying process changed the colour parameters of L*, a*, and b*, causing a colour shift toward the darker region. The values of L* and hue angle decreased, whereas the values of a*, b*, ∆E, chroma and browning index increased during exposure to infrared vacuum conditions and microwave drying. Comparing the results obtained using the new model with two conventional models of zero-order and first-order kinetics indicated that the new model presented more compatibility with the data of colour kinetics for all colour parameters and drying conditions. All kinetic changes in colour parameters can be explained by the new model presented in this study. The hybrid drying system included infrared vacuum conditions and microwave power for initial slow drying of plum slices and provided the desired results for colour change.

Iron from nanocompounds containing iron and zinc is highly bioavailable in rats without tissue accumulation

NASA Astrophysics Data System (ADS)

Hilty, Florentine M.; Arnold, Myrtha; Hilbe, Monika; Teleki, Alexandra; Knijnenburg, Jesper T. N.; Ehrensperger, Felix; Hurrell, Richard F.; Pratsinis, Sotiris E.; Langhans, Wolfgang; Zimmermann, Michael B.

2010-05-01

Effective iron fortification of foods is difficult, because water-soluble compounds that are well absorbed, such as ferrous sulphate (FeSO4), often cause unacceptable changes in the colour or taste of foods. Poorly water-soluble compounds, on the other hand, cause fewer sensory changes, but are not well absorbed. Here, we show that poorly water-soluble nanosized Fe and Fe/Zn compounds (specific surface area ~190 m2 g-1) made by scalable flame aerosol technology have in vivo iron bioavailability in rats comparable to FeSO4 and cause less colour change in reactive food matrices than conventional iron fortificants. The addition of Zn to FePO4 and Mg to Fe/Zn oxide increases Fe absorption from the compounds, and doping with Mg also improves their colour. After feeding rats with nanostructured iron-containing compounds, no stainable Fe was detected in their gut wall, gut-associated lymphatics or other tissues, suggesting no adverse effects. Nanosizing of poorly water-soluble Fe compounds sharply increases their absorption and nutritional value.

Iron from nanocompounds containing iron and zinc is highly bioavailable in rats without tissue accumulation.

PubMed

Hilty, Florentine M; Arnold, Myrtha; Hilbe, Monika; Teleki, Alexandra; Knijnenburg, Jesper T N; Ehrensperger, Felix; Hurrell, Richard F; Pratsinis, Sotiris E; Langhans, Wolfgang; Zimmermann, Michael B

2010-05-01

Effective iron fortification of foods is difficult, because water-soluble compounds that are well absorbed, such as ferrous sulphate (FeSO(4)), often cause unacceptable changes in the colour or taste of foods. Poorly water-soluble compounds, on the other hand, cause fewer sensory changes, but are not well absorbed. Here, we show that poorly water-soluble nanosized Fe and Fe/Zn compounds (specific surface area approximately 190 m(2) g(-1)) made by scalable flame aerosol technology have in vivo iron bioavailability in rats comparable to FeSO(4) and cause less colour change in reactive food matrices than conventional iron fortificants. The addition of Zn to FePO(4) and Mg to Fe/Zn oxide increases Fe absorption from the compounds, and doping with Mg also improves their colour. After feeding rats with nanostructured iron-containing compounds, no stainable Fe was detected in their gut wall, gut-associated lymphatics or other tissues, suggesting no adverse effects. Nanosizing of poorly water-soluble Fe compounds sharply increases their absorption and nutritional value.

Efficacy of antioxidants in human hair.

PubMed

Fernández, Estibalitz; Martínez-Teipel, Blanca; Armengol, Ricard; Barba, Clara; Coderch, Luisa

2012-12-05

Hair is exposed every day to a range of harmful effects such as sunlight, pollution, cosmetic treatments, grooming practices and cleansing. The UV components of sunlight damage human hair, causing fibre degradation. UV-B attacks the melanin pigments and the protein fractions (keratin) of hair and UV-A produces free radical/reactive oxygen species (ROS) through the interaction of endogenous photosensitizers. Hair was dyed and the efficacy of two antioxidant formulations was demonstrated after UV exposure by evaluating, surface morphology, protein and amino acid degradation, lipidic peroxidation, colour and shine changes and strength/relaxation properties. UV treatment resulted in an increase in protein and lipid degradation, changes in colour and shine and in adverse consequences for the mechanical properties. Natural antioxidants obtained from artichoke and rice applied to pretreated hair improved mechanical properties and preserved colour and shine of fibres, coating them and protecting them against UV. Furthermore, the lipidic peroxidation of the protein degradation caused by UV was reduced for some treated fibres, suggesting an improvement in fibre integrity. This was more marked in the case of the fibres treated using the artichoke extract, whereas the rice extract was better preserving shine and colour of hair fibres. Copyright © 2012 Elsevier B.V. All rights reserved.

Colour changes of orthodontic elastomeric module materials exposed to in vitro dietary media.

PubMed

Ardeshna, Anil P; Vaidyanathan, Tritala K

2009-09-01

To evaluate the colour stability of orthodontic elastomeric module material exposed to dietary media. An in vitro laboratory study. Coloured and clear orthodontic elastomeric modules from four companies were exposed to coffee, cola, tea and spices for 72 h. The difference in colour components was measured with a Minolta chromameter before and after exposure. Significant changes in colour, including grey level and chromaticity, both as a function of colour and company of elastomeric ligature module were found following exposure to beverages and spices. Colour change was most affected by Deltab* (yellowness) and most significant in clear modules. Modules made using injection mouldings were more resistant to colour change than those by extrusion. Spice mix had the most effect and cola beverage the least. Clinically, these changes compromised both colour stability and esthetics of the elastomeric module. Clinicians should make patients aware of the effect of consuming beverages and spices on the colour stability of their selected ligature modules. Clinicians should favour modules made with injection moulding. Darker colour modules may be preferred to clear modules to avoid excessive colour degradation through dietary media such as beverages and food spices. Patients consuming large amounts of spices or coffee should avoid clear modules made by extrusion processing because of their tendency to discolour.

The Neuro-Hormonal Control of Rapid Dynamic Skin Colour Change in an Amphibian during Amplexus

PubMed Central

Kindermann, Christina; Narayan, Edward J.; Hero, Jean-Marc

2014-01-01

Sexual signalling using dynamic skin colouration is a key feature in some vertebrates; however, it is rarely studied in amphibians. Consequently, little is known about the hormonal basis of this interesting biological phenomenon for many species. Male stony creek frogs (Litoria wilcoxii) are known to change dorsal colouration from brown to lemon yellow within minutes. This striking change is faster then what has been seen most amphibians, and could therefore be under neuronal regulation, a factor that is rarely observed in amphibians. In this study, we observed colour changes in wild frogs during amplexus to determine the natural timing of colour change. We also investigated the hypothesis that colour change is mediated by either reproductive or neuro- hormones. This was achieved by injecting frogs with epinephrine, testosterone, saline solution (control 1) or sesame oil (control 2). A non-invasive approach was also used wherein hormones and controls were administered topically. Male frogs turned a vivid yellow within 5 minutes of initiation of amplexus and remained so for 3–5 hours before rapidly fading back to brown. Epinephrine-treated frogs showed a significant colour change from brown to yellow within 5 minutes, however, testosterone-treated frogs did not change colour. Our results provide evidence of the role neuronal regulation plays in colour change systems. PMID:25470775

Evaluation of hardness and colour change of soft liners after accelerated ageing.

PubMed

Mancuso, Daniela Nardi; Goiato, Marcelo Coelho; Zuccolotti, Bruna Carolina Rossatti; Moreno, Amália; dos Santos, Daniela Micheline

2009-07-01

Soft liners have been developed to offer comfort to denture wearers. However, this comfort is compromised when there is a change in the properties of the material, causing colour change, solubility, absorption and hardening. These characteristics can compromise the longevity of soft liners. The aim of this in vitro study was to investigate the effect of ageing on both the hardness and colour change of two soft liners following accelerated ageing. Two denture liners, one resin based (Trusoft, Bosworth, Illinois, USA) and one silicone based (Ufi Gel P, Voco GMBH, Cuxhaven, Germany), were tested in this study for both hardness (using the Shore A scale) and colour change (using the CIE L*a*b* colour scale), initially and after 1008 hours (6 weeks) of accelerated ageing. Statistical analysis was performed using the unpaired t-test with the Welch correction. These indicated that both materials increased in hardness and underwent colour change after accelerated ageing. The initial hardness of Trusoft was far lower than that of Ufi Gel P (18.2 Shore A units vs 34.8 Shore A units). However, for Trusoft the changes for both hardness (from 18.2 to 52.1 Shore A units) and colour change (16.85 on the CIE L*a*b* colour scale) were greater than those for Ufi Gel P, for which hardness changed from 34.8 to 36.5 Shore A units and the colour change was 5.19 on the CIE L*a*b* colour scale. Ufi Gel P underwent less hardness and colour change after accelerated ageing than Trusoft. On the other hand, the use of Trusoft may be preferable in cases where initial softness is a major consideration, such as when relining an immediate denture after implant surgery.

Colour Mixing Based on Daylight

ERIC Educational Resources Information Center

Meyn, Jan-Peter

2008-01-01

Colour science is based on the sensation of monochromatic light. In contrast to that, surface colours are caused by reflection of wide sections of the daylight spectrum. Non-spectral colours like magenta and purple appear homologous to colours with spectral hue, if the approach of mixing monochromatic light is abandoned. It is shown that a large…

Skin colour changes during experimentally-induced sickness.

PubMed

Henderson, Audrey J; Lasselin, Julie; Lekander, Mats; Olsson, Mats J; Powis, Simon J; Axelsson, John; Perrett, David I

2017-02-01

Skin colour may be an important cue to detect sickness in humans but how skin colour changes with acute sickness is currently unknown. To determine possible colour changes, 22 healthy Caucasian participants were injected twice, once with lipopolysaccharide (LPS, at a dose of 2ng/kg body weight) and once with placebo (saline), in a randomised cross-over design study. Skin colour across 3 arm and 3 face locations was recorded spectrophotometrically over a period of 8h in terms of lightness (L ∗ ), redness (a ∗ ) and yellowness (b ∗ ) in a manner that is consistent with human colour perception. In addition, carotenoid status was assessed as we predicted that a decrease it skin yellowness would reflect a drop in skin carotenoids. We found an early change in skin colouration 1-3h post LPS injection with facial skin becoming lighter and less red whilst arm skin become darker but also less red and less yellow. The LPS injection also caused a drop in plasma carotenoids from 3h onwards. However, the timing of the carotenoid changes was not consistent with the skin colour changes suggesting that other mechanisms, such as a reduction of blood perfusion, oxygenation or composition. This is the first experimental study characterising skin colour associated with acute illness, and shows that changes occur early in the development of the sickness response. Colour changes may serve as a cue to health, prompting actions from others in terms of care-giving or disease avoidance. Specific mechanisms underlying these colour changes require further investigation. Copyright © 2016 Elsevier Inc. All rights reserved.

Colour detection thresholds in faces and colour patches.

PubMed

Tan, Kok Wei; Stephen, Ian D

2013-01-01

Human facial skin colour reflects individuals' underlying health (Stephen et al 2011 Evolution & Human Behavior 32 216-227); and enhanced facial skin CIELab b* (yellowness), a* (redness), and L* (lightness) are perceived as healthy (also Stephen et al 2009a International Journal of Primatology 30 845-857). Here, we examine Malaysian Chinese participants' detection thresholds for CIELab L* (lightness), a* (redness), and b* (yellowness) colour changes in Asian, African, and Caucasian faces and skin coloured patches. Twelve face photos and three skin coloured patches were transformed to produce four pairs of images of each individual face and colour patch with different amounts of red, yellow, or lightness, from very subtle (deltaE = 1.2) to quite large differences (deltaE = 9.6). Participants were asked to decide which of sequentially displayed, paired same-face images or colour patches were lighter, redder, or yellower. Changes in facial redness, followed by changes in yellowness, were more easily discriminated than changes in luminance. However, visual sensitivity was not greater for redness and yellowness in nonface stimuli, suggesting red facial skin colour special salience. Participants were also significantly better at recognizing colour differences in own-race (Asian) and Caucasian faces than in African faces, suggesting the existence of cross-race effect in discriminating facial colours. Humans' colour vision may have been selected for skin colour signalling (Changizi et al 2006 Biology Letters 2 217-221), enabling individuals to perceive subtle changes in skin colour, reflecting health and emotional status.

Liquid crystal colloidal structures for increased silicone deposition efficiency on colour-treated hair.

PubMed

Brown, M A; Hutchins, T A; Gamsky, C J; Wagner, M S; Page, S H; Marsh, J M

2010-06-01

An approach is described to increase the deposition efficiency of silicone conditioning actives from a shampoo on colour-treated hair via liquid crystal (LC) colloidal structures, created with a high charge density cationic polymer, poly(diallyldimethyl ammonium chloride) and negatively charged surfactants. LCs are materials existing structurally between the solid crystalline and liquid phases, and several techniques, including polarized light microscopy, small angle X-Ray analysis, and differential scanning calorimetry, were used to confirm the presence of the LC structures in the shampoo formula. Silicone deposition from the LC-containing shampoo and a control shampoo was measured on a range of hair substrates, and data from inductively coupled plasma optical emission spectroscopy analysis and ToF-SIMS imaging illustrate the enhancement in silicone deposition for the LC shampoo on all hair types tested, with the most pronounced enhancement occurring on hair that had undergone oxidative treatments, such as colouring. A model is proposed in which the LC structure deposits from the shampoo onto the hair to: (i) provide 'slip planes' along the hair surface for wet conditioning purposes and (ii) form a hydrophobic layer which changes the surface energy of the fibres. This increase in hydrophobicity of the hair surface thereby increases the deposition efficiency of silicone conditioning ingredients. Zeta potential measurements, dynamic absorbency testing analysis and ToF-SIMS imaging were used to better understand the mechanisms of action. This approach to increasing silicone deposition is an improvement relative to conventional conditioning shampoos, especially for colour-treated hair.

The impacts of prescribed moorland burning on water colour and dissolved organic carbon: a critical synthesis.

PubMed

Holden, J; Chapman, P J; Palmer, S M; Kay, P; Grayson, R

2012-06-30

Discolouration of natural surface waters due to the humic component of dissolved organic carbon (DOC) is a costly problem for water supply companies. This paper reviews what is known about the impacts of prescribed moorland vegetation burning on water colour. Relevant research has taken place at three scales: laboratory experiments on peat cores, plot scale sampling of soil waters and catchment scale sampling of stream waters. While laboratory studies suggest burning increases colour production, the evidence from catchment and plot studies is contradictory. Plot studies suggest colour production may decrease or remain unchanged following burning although there is evidence for some transient changes. Catchment studies suggest prescribed moorland burning causes stream water colour to increase, although in most cases the evidence is not clear cut since most studies could not clearly disentangle the effects of burning from those of vegetation cover. The differences in findings between plot and catchment studies may be explained by: i) the short-term nature of some studies which do not measure long-term response and recovery times to burning; ii) the lack of colour measurements from shallow soil depths which contribute more to streamflow than soil water from deeper in the peat; and iii) the possibility of hydrological interactions occurring between different experimental plots at some sites. Additionally, the increase in recent patch burning in some catchments that has been statistically attributed by some authors to increases in stream water colour cannot be reconciled with theoretical calculations. When dilution with waters derived from other parts of the catchment are taken into account, large values of colour have to be theoretically derived from those recently burnt areas that occupy a small proportion of the catchment area in order to balance the change in stream water colour observed in recent years. Therefore, much further process-based work is required to properly investigate whether prescribed vegetation burning is a direct driver of enhanced colour and DOC in upland streams, rivers and lakes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Colour perception with changes in levels of illumination

NASA Astrophysics Data System (ADS)

Baah, Kwame F.; Green, Phil; Pointer, Michael

2012-01-01

The perceived colour of a stimulus depends on the conditions under which it is viewed. For colours employed as an important cue or identifier, such as signage and brand colours, colour reproduction tolerances are critically important. Typically, such stimuli would be judged using a known level of illumination but, in the target environment, the level of illumination used to view the samples may be entirely different. The effect of changes in the viewing condition on the perceptibility and acceptability of small colour differences should be understood when such tolerances and associated viewing conditions, are specified. A series of psychophysical experiments was conducted to determine whether changes in illumination level significantly alter acceptability and perceptibility thresholds of uniform colour stimuli. It was found that perceived colour discrimination thresholds varied by up to 2.0 ΔE00. For the perceptual correlate of hue however, this value could be of significance if the accepted error of colour difference was at the threshold, thereby yielding the possibility of rejection with changes in illumination level. Lightness and chroma on the other hand, exhibited greater tolerance and were less likely to be rejected with illuminance changes.

Laser-induced plasmonic colours on metals

NASA Astrophysics Data System (ADS)

Guay, Jean-Michel; Calà Lesina, Antonino; Côté, Guillaume; Charron, Martin; Poitras, Daniel; Ramunno, Lora; Berini, Pierre; Weck, Arnaud

2017-07-01

Plasmonic resonances in metallic nanoparticles have been used since antiquity to colour glasses. The use of metal nanostructures for surface colourization has attracted considerable interest following recent developments in plasmonics. However, current top-down colourization methods are not ideally suited to large-scale industrial applications. Here we use a bottom-up approach where picosecond laser pulses can produce a full palette of non-iridescent colours on silver, gold, copper and aluminium. We demonstrate the process on silver coins weighing up to 5 kg and bearing large topographic variations (~1.5 cm). We find that colours are related to a single parameter, the total accumulated fluence, making the process suitable for high-throughput industrial applications. Statistical image analyses of laser-irradiated surfaces reveal various nanoparticle size distributions. Large-scale finite-difference time-domain computations based on these nanoparticle distributions reproduce trends seen in reflectance measurements, and demonstrate the key role of plasmonic resonances in colour formation.

Laser-induced plasmonic colours on metals

PubMed Central

Guay, Jean-Michel; Calà Lesina, Antonino; Côté, Guillaume; Charron, Martin; Poitras, Daniel; Ramunno, Lora; Berini, Pierre; Weck, Arnaud

2017-01-01

Plasmonic resonances in metallic nanoparticles have been used since antiquity to colour glasses. The use of metal nanostructures for surface colourization has attracted considerable interest following recent developments in plasmonics. However, current top-down colourization methods are not ideally suited to large-scale industrial applications. Here we use a bottom-up approach where picosecond laser pulses can produce a full palette of non-iridescent colours on silver, gold, copper and aluminium. We demonstrate the process on silver coins weighing up to 5 kg and bearing large topographic variations (∼1.5 cm). We find that colours are related to a single parameter, the total accumulated fluence, making the process suitable for high-throughput industrial applications. Statistical image analyses of laser-irradiated surfaces reveal various nanoparticle size distributions. Large-scale finite-difference time-domain computations based on these nanoparticle distributions reproduce trends seen in reflectance measurements, and demonstrate the key role of plasmonic resonances in colour formation. PMID:28719576

Chameleons communicate with complex colour changes during contests: different body regions convey different information.

PubMed

Ligon, Russell A; McGraw, Kevin J

2013-01-01

Many animals display static coloration (e.g. of feathers or fur) that can serve as a reliable sexual or social signal, but the communication function of rapidly changing colours (as in chameleons and cephalopods) is poorly understood. We used recently developed photographic and mathematical modelling tools to examine how rapid colour changes of veiled chameleons Chamaeleo calyptratus predict aggressive behaviour during male-male competitions. Males that achieved brighter stripe coloration were more likely to approach their opponent, and those that attained brighter head coloration were more likely to win fights; speed of head colour change was also an important predictor of contest outcome. This correlative study represents the first quantification of rapid colour change using organism-specific visual models and provides evidence that the rate of colour change, in addition to maximum display coloration, can be an important component of communication. Interestingly, the body and head locations of the relevant colour signals map onto the behavioural displays given during specific contest stages, with lateral displays from a distance followed by directed, head-on approaches prior to combat, suggesting that different colour change signals may evolve to communicate different information (motivation and fighting ability, respectively).

Chameleons communicate with complex colour changes during contests: different body regions convey different information

PubMed Central

Ligon, Russell A.; McGraw, Kevin J.

2013-01-01

Many animals display static coloration (e.g. of feathers or fur) that can serve as a reliable sexual or social signal, but the communication function of rapidly changing colours (as in chameleons and cephalopods) is poorly understood. We used recently developed photographic and mathematical modelling tools to examine how rapid colour changes of veiled chameleons Chamaeleo calyptratus predict aggressive behaviour during male–male competitions. Males that achieved brighter stripe coloration were more likely to approach their opponent, and those that attained brighter head coloration were more likely to win fights; speed of head colour change was also an important predictor of contest outcome. This correlative study represents the first quantification of rapid colour change using organism-specific visual models and provides evidence that the rate of colour change, in addition to maximum display coloration, can be an important component of communication. Interestingly, the body and head locations of the relevant colour signals map onto the behavioural displays given during specific contest stages, with lateral displays from a distance followed by directed, head-on approaches prior to combat, suggesting that different colour change signals may evolve to communicate different information (motivation and fighting ability, respectively). PMID:24335271

Colour stability of temporary restorations with different thicknesses submitted to artificial accelerated aging.

PubMed

Silame, F D J; Tonani, R; Alandia-Roman, C C; Chinelatti, M; Panzeri, H; Pires-de-Souza, F C P

2013-12-01

This study evaluated the colour stability of temporary prosthetic restorations with different thicknesses submitted to artificial accelerated aging. The occlusal surfaces of 40 molars were grinded to obtain flat enamel surfaces. Twenty acrylic resin specimens [Polymethyl methacrylate (Duralay) and Bis-methyl acrylate (Luxatemp)] were made with two different thicknesses, 0.5 mm and 1.0 mm. Temporary restorations were fixed on enamel and CIE L*a*b* colour parameters of each specimen were assessed before and after artificial accelerated aging. All groups showed colour alterations above the clinically acceptable limit. Luxatemp showed the lowest colour alteration regardless its thickness and Duralay showed the greatest alteration with 0.5 mm.

On the morphological and chemical stability of vitamin C crystals

NASA Astrophysics Data System (ADS)

Halász, Susan; Bodor, Beáta

1993-03-01

Mass cooling crystallization of aqueous vitamin C solution was studied by applying different cooling rates, initial supersaturations and mixing intensity. The morphology of the products (size, habit and colour) well followed the changes of process parameters. Comparing a high purity (99.9%) standard with a yellow coloured heterodisperse product and a slowly grown single crystal, HPLC chromatography detected decreasing purity of the bigger single crystals, while X-ray and NMR analysis did not show any perceptible difference. It has been concluded that not the surface oxidation (chemical degredation), but rather the inclusions are the main sources of impurities within the crystals.

Enamel color changes following orthodontic treatment.

PubMed

Pandian, Akshaya; Ranganathan, Sukanya; Padmanabhan, Sridevi

2017-01-01

To evaluate and compare the effect of various orthodontic bonding systems and clean up procedures on quantitative enamel colour change. A literature search was done to identify the studies that assessed the quantitative enamel colour change associated with the various bonding systems and cleanup procedures. Electronic database (Pub Med, Cochrane and Google Scholar) were searched. First stage screening was performed and the abstracts were selected according to the initial selection criteria. Full text articles were retrieved and analyzed during second stage screening. The bibliographies were reviewed to identify additional relevant studies. Sixteen full text articles were retrieved. Six were rejected because the methodology was different. There was significant enamel colour change following orthodontic bonding, debonding and clean up procedures. Self-etching primers produce less enamel colour change compared to conventional etching. Resin Modified GIC produces least colour change compared to other light cure and chemical cure systems. Polishing following the clean-up procedure reduces the colour change of the enamel.

Measuring changes in internal meat colour, colour lightness and colour opacity as predictors of cooking time.

PubMed

Pakula, Christiane; Stamminger, Rainer

2012-03-01

Consumers and cooks often assess the degree of doneness of roasted beef by the internal meat colour. Real-time colour measurement of the cooking process is therefore developed in order to determine the degree of doneness, and thus the end of the cooking process, by the internal meat colour. The colour values (X, Y, Z) provided by the true colour sensor show significant variation within initial values and end values. Change in colour lightness caused by the increase of meat colour opacity is dominant. Calculating the first deviation of the Y values (dY/dt) indicates that most rapid changes in lightness are within a temperature range of 42°C and 56°C. At this temperature, the degree of meat doneness is still assumed to be rare, but it is possible to predict the time needed from this point until the desired degree of doneness is reached. Copyright © 2011 Elsevier Ltd. All rights reserved.

The structural coloration of textile materials using self-assembled silica nanoparticles

NASA Astrophysics Data System (ADS)

Gao, Weihong; Rigout, Muriel; Owens, Huw

2017-09-01

The work presented investigates how to produce structural colours on textile materials by applying a surface coating of silica nanoparticles (SNPs). Uniform SNPs with particle diameters in a controlled micron size range (207-350 nm) were synthesized using a Stöber-based solvent varying (SV) method which has been reported previously. Photonic crystals (PCs) were formed on the surface of a piece of textile fabric through a process of natural sedimentation self-assembly of the colloidal suspension containing uniform SNPs. Due to the uniformity and a particular diameter range of the prepared SNPs, structural colours were observed from the fabric surface due to the Bragg diffraction of white light with the ordered structure of the silica PCs. By varying the mean particle diameter, a wide range of spectral colours from red to blue were obtained. The comparison of structural colours on fabrics and on glasses suggests that a smooth substrate is critical when producing materials with high colour intensity and spatial uniformity. This work suggested a promising approach to colour textile materials without the need for traditional dyes and/or pigments. [Figure not available: see fulltext.

The structural coloration of textile materials using self-assembled silica nanoparticles.

PubMed

Gao, Weihong; Rigout, Muriel; Owens, Huw

2017-01-01

The work presented investigates how to produce structural colours on textile materials by applying a surface coating of silica nanoparticles (SNPs). Uniform SNPs with particle diameters in a controlled micron size range (207-350 nm) were synthesized using a Stöber-based solvent varying (SV) method which has been reported previously. Photonic crystals (PCs) were formed on the surface of a piece of textile fabric through a process of natural sedimentation self-assembly of the colloidal suspension containing uniform SNPs. Due to the uniformity and a particular diameter range of the prepared SNPs, structural colours were observed from the fabric surface due to the Bragg diffraction of white light with the ordered structure of the silica PCs. By varying the mean particle diameter, a wide range of spectral colours from red to blue were obtained. The comparison of structural colours on fabrics and on glasses suggests that a smooth substrate is critical when producing materials with high colour intensity and spatial uniformity. This work suggested a promising approach to colour textile materials without the need for traditional dyes and/or pigments. Graphical abstract.

Rockpool Gobies Change Colour for Camouflage

PubMed Central

Stevens, Martin; Lown, Alice E.; Denton, Alexander M.

2014-01-01

Camouflage is found in a wide range of species living in numerous habitat types, offering protection from visually guided predators. This includes many species from the intertidal zone, which must cope with background types diverse in appearance and with multiple predator groups foraging at high and low tide. Many animals are capable of either relatively slow (hours, days, weeks) or rapid (seconds and minutes) colour change in order to better resemble the background against which they are found, but most work has been restricted to a few species or taxa. It is often suggested that many small intertidal fish are capable of colour change for camouflage, yet little experimental work has addressed this. Here, we test rock gobies (Gobius paganellus) for colour change abilities, and whether they can tune their appearance to match the background. In two experiments, we place gobies on backgrounds of different brightness (black or white), and of different colours (red and blue) and use digital image analysis and modelling of predator (avian) vision to quantify colour and luminance (perceived lightness) changes and camouflage. We find that gobies are capable of rapid colour change (occurring within one minute), and that they can change their luminance on lighter or darker backgrounds. When presented on backgrounds of different colours, gobies also change their colour (hue and saturation) while keeping luminance the same. These changes lead to predicted improvements in camouflage match to the background. Our study shows that small rockpool fish are capable of rapid visual change for concealment, and that this may be an important mechanism in many species to avoid predation, especially in complex heterogeneous environments. PMID:25333382

Rockpool gobies change colour for camouflage.

PubMed

Stevens, Martin; Lown, Alice E; Denton, Alexander M

2014-01-01

Camouflage is found in a wide range of species living in numerous habitat types, offering protection from visually guided predators. This includes many species from the intertidal zone, which must cope with background types diverse in appearance and with multiple predator groups foraging at high and low tide. Many animals are capable of either relatively slow (hours, days, weeks) or rapid (seconds and minutes) colour change in order to better resemble the background against which they are found, but most work has been restricted to a few species or taxa. It is often suggested that many small intertidal fish are capable of colour change for camouflage, yet little experimental work has addressed this. Here, we test rock gobies (Gobius paganellus) for colour change abilities, and whether they can tune their appearance to match the background. In two experiments, we place gobies on backgrounds of different brightness (black or white), and of different colours (red and blue) and use digital image analysis and modelling of predator (avian) vision to quantify colour and luminance (perceived lightness) changes and camouflage. We find that gobies are capable of rapid colour change (occurring within one minute), and that they can change their luminance on lighter or darker backgrounds. When presented on backgrounds of different colours, gobies also change their colour (hue and saturation) while keeping luminance the same. These changes lead to predicted improvements in camouflage match to the background. Our study shows that small rockpool fish are capable of rapid visual change for concealment, and that this may be an important mechanism in many species to avoid predation, especially in complex heterogeneous environments.

Biothiols induced colour change of silver nanoparticles: A colorimetric sensing strategy

NASA Astrophysics Data System (ADS)

Thomas, Ambily; Sivasankaran, Unni; Kumar, Krishnapillai Girish

2018-01-01

A sensor for the detection and determination of bio-thiols (glutathione (GSH) and cysteamine (Cyste)) has been developed by integrating the distinguished distance related optical characteristics of silver nanoparticles with the simplicity of colorimetric technique. In presence of these analytes, shift in surface plasmon resonance (SPR) absorption of silver nanoparticles (AgNPs) with change in its colour was observed. Yellow coloured AgNPs solution becomes colourless in presence of GSH and changes to red in presence of Cyste. FTIR, TEM and DLS studies were used to confirm the mechanism. The difference in absorption of AgNPs in the absence and presence of GSH was found to vary linearly in the range 1.00 × 10- 5 M to 5.00 × 10- 7 M concentration range with limit of detection at 3.68 × 10- 7 M. The method can also be applied to quantify Cyste in the range 1.10 × 10- 6 M to 5.00 × 10- 8 M with limit of detection at 1.80 × 10- 8 M. The utility of the proposed colorimetric assay is validated by determination of GSH and Cyste in artificial blood serum.

Colour Stability of Various Types of Acrylic Teeth Exposed to Coffee, Tea and Cola

PubMed Central

S, Mousavi; S, Narimani; S, Hekmatfar; K, Jafari

2016-01-01

Statement of Problem: Acrylic teeth of dentures are prone to discoloration due to frequent exposure to different colouring solutions in the oral environment. Thus, in order to maintain their aesthetic appearance, they must possess high colour stability while exposed to colorant solutions. Objectives: To compare the colour stability of three different brands of acrylic teeth following immersion in coffee, tea and cola. Materials and Methods: This in vitro experimental study was conducted on 90 acrylic teeth in three groups (n = 30) of Ivoclar (Italy), PolyDent (Slovenia) and Apple (Iran). The teeth were immersed in coffee, cola and tea for one, three and six weeks (the teeth were not in contact with each other). Colour parameters were assessed before and after immersion using a spectrophotometer, and overall change in colour parameters was calculated. The overall colour change (ΔE) of the three groups at different time points was analyzed using one-way ANOVA. Pairwise comparisons were performed using Tukey’s test. Results: Coffee caused the greatest colour change in Apple acrylic teeth after six weeks (mean ΔE of 4.6 for coffee and 3.4 for tea and cola). Tea caused an almost equal colour change in the three groups. The greatest colour change in the Ivoclar teeth occurred in cola after six weeks (mean ΔE of 3.3, 3.4 and 2.8 for cola, tea and coffee, respectively). The greatest ΔE occurred at six weeks and was the highest in Apple, followed by PolyDent and then Ivoclar teeth in coffee (mean ΔE of 4.6, 3.4 and 3.3, respectively p < 0.001). Conclusions: Despite the significant colour change in the three groups, ΔE in Ivoclar group was within the clinically acceptable range of ≤ 3.3. A slight colour change was expected regarding the Apple and PolyDent acrylic teeth clinically. PMID:28959762

Colour Stability of Various Types of Acrylic Teeth Exposed to Coffee, Tea and Cola.

PubMed

S, Mousavi; S, Narimani; S, Hekmatfar; K, Jafari

2016-12-01

Acrylic teeth of dentures are prone to discoloration due to frequent exposure to different colouring solutions in the oral environment. Thus, in order to maintain their aesthetic appearance, they must possess high colour stability while exposed to colorant solutions. To compare the colour stability of three different brands of acrylic teeth following immersion in coffee, tea and cola. This in vitro experimental study was conducted on 90 acrylic teeth in three groups (n = 30) of Ivoclar (Italy), PolyDent (Slovenia) and Apple (Iran). The teeth were immersed in coffee, cola and tea for one, three and six weeks (the teeth were not in contact with each other). Colour parameters were assessed before and after immersion using a spectrophotometer, and overall change in colour parameters was calculated. The overall colour change (ΔE) of the three groups at different time points was analyzed using one-way ANOVA. Pairwise comparisons were performed using Tukey's test. Coffee caused the greatest colour change in Apple acrylic teeth after six weeks (mean ΔE of 4.6 for coffee and 3.4 for tea and cola). Tea caused an almost equal colour change in the three groups. The greatest colour change in the Ivoclar teeth occurred in cola after six weeks (mean ΔE of 3.3, 3.4 and 2.8 for cola, tea and coffee, respectively). The greatest ΔE occurred at six weeks and was the highest in Apple, followed by PolyDent and then Ivoclar teeth in coffee (mean ΔE of 4.6, 3.4 and 3.3, respectively p < 0.001). Despite the significant colour change in the three groups, ΔE in Ivoclar group was within the clinically acceptable range of ≤ 3.3. A slight colour change was expected regarding the Apple and PolyDent acrylic teeth clinically.

False-colour palette generation using a reference colour gamut

NASA Astrophysics Data System (ADS)

Green, Phil

2015-01-01

Monochrome images are often converted to false-colour images, in which arbitrary colours are assigned to regions of the image to aid recognition of features within the image. Criteria for selection of colour palettes vary according to the application, but may include distinctiveness, extensibility, consistency, preference, meaningfulness and universality. A method for defining a palette from colours on the surface of a reference gamut is described, which ensures that all colours in the palette have the maximum chroma available for the given hue angle in the reference gamut. The palette can be re-targeted to a reproduction medium as needed using colour management, and this method ensures consistency between cross-media colour reproductions using the palette.

Colour and carotenoid changes of pasteurised orange juice during storage.

PubMed

Wibowo, Scheling; Vervoort, Liesbeth; Tomic, Jovana; Santiago, Jihan Santanina; Lemmens, Lien; Panozzo, Agnese; Grauwet, Tara; Hendrickx, Marc; Van Loey, Ann

2015-03-15

The correlation of carotenoid changes with colour degradation of pasteurised single strength orange juice was investigated at 20, 28, 35 and 42°C for a total of 32 weeks of storage. Changes in colour were assessed using the CIELAB system and were kinetically described by a zero-order model. L(∗), a(∗), b(∗), ΔE(∗), Cab(∗) and hab were significantly changed during storage (p<0.05). Activation energies for all colour parameters were 64-73 kJ mol(-1). Several carotenoids showed important changes and appeared to have different susceptibilities to storage. A decrease of β-cryptoxanthin was observed at higher temperatures, whereas antheraxanthin started to decrease at lower temperatures. Depending on the time and temperature, changes in carotenoids could be due to isomerisation reactions, which may lead to a perceptible colour change. Although the contribution of carotenoids was recognised to some extent, other reactions seem of major importance for colour degradation of orange juice during storage. Copyright © 2014 Elsevier Ltd. All rights reserved.

Conflict between background matching and social signalling in a colour-changing freshwater fish.

PubMed

Kelley, Jennifer L; Rodgers, Gwendolen M; Morrell, Lesley J

2016-06-01

The ability to change coloration allows animals to modify their patterning to suit a specific function. Many freshwater fishes, for example, can appear cryptic by altering the dispersion of melanin pigment in the skin to match the visual background. However, melanin-based pigments are also used to signal dominance among competing males; thus colour change for background matching may conflict with colour change for social status signalling. We used a colour-changing freshwater fish to investigate whether colour change for background matching influenced aggressive interactions between rival males. Subordinate males that had recently darkened their skin for background matching received heightened aggression from dominant males, relative to males whose coloration had not changed. We then determined whether the social status of a rival male, the focal male's previous social status, and his previous skin coloration, affected a male's ability to change colour for background matching. Social status influenced skin darkening in the first social encounter, with dominant males darkening more than subordinate males, but there was no effect of social status on colour change in the second social encounter. We also found that the extent of skin colour change (by both dominant and subordinate males) was dependent on previous skin coloration, with dark males displaying a smaller change in coloration than pale males. Our findings suggest that skin darkening for background matching imposes a significant social cost on subordinate males in terms of increased aggression. We also suggest that the use of melanin-based signals during social encounters can impede subsequent changes in skin coloration for other functions, such as skin darkening for background matching.

Detecting gradual visual changes in colour and brightness agnosia: a double dissociation.

PubMed

Nijboer, Tanja C W; te Pas, Susan F; van der Smagt, Maarten J

2011-03-09

Two patients, one with colour agnosia and one with brightness agnosia, performed a task that required the detection of gradual temporal changes in colour and brightness. The results for these patients, who showed anaverage or an above-average performance on several tasks designed to test low-level colour and luminance (contrast) perception in the spatial domain, yielded a double dissociation; the brightness agnosic patient was within the normal range for the coloured stimuli, but much slower to detect brightness differences, whereas the colour agnosic patient was within the normal range for the achromatic stimuli, but much slower for the coloured stimuli. These results suggest that a modality-specific impairment in the detection of gradual temporal changes might be related to, if not underlie, the phenomenon of visual agnosia.

Fundamental characteristics of a dual-colour fibre optic SPR sensor

NASA Astrophysics Data System (ADS)

Suzuki, Hitoshi; Sugimoto, Mitsunori; Matsui, Yoshikazu; Kondoh, Jun

2006-06-01

In this paper, we present the fundamental characteristics of a novel dual-colour optical fibre surface plasmon resonance (SPR) sensor for a portable low-cost sensing system. The principle of the proposed SPR sensor is based on the differential reflectance method. Light from two light-emitting diodes (LEDs), which are flashing alternately with different wavelengths, is fed to a sensor via two optical couplers. The reflected light is detected by a photodiode. Changes of reflectance at two wavelengths are proportional to the refractive index change of the medium of interest. Taking the difference in reflectance at two wavelengths improves the sensitivity almost twofold. Measuring ethanol solutions with different refractive indices reveals that the sensor has a linear response to the refractive index change from 1.333 to 1.3616. By measuring the stability in the time response we estimate that the limit of detection (LOD) of the refractive index is 5.2 × 10-4.

Temporal variability and coloured noise of SLR translations with respect to the ITRF2014 origin

NASA Astrophysics Data System (ADS)

Riddell, Anna; King, Matt; Watson, Christopher; Rietbroek, Roelof; Sun, Yu; Riva, Riccardo

2017-04-01

Inferring large-scale environmental change, such as of sea-level change, glacial isostatic adjustment or ice sheet volume change (i.e. from altimetry), requires a geodetic reference frame stable to 0.1 mm/yr. Since 1988, each iterative improvement in the precision of the International Terrestrial Reference Frame (ITRF) has enabled significant advancement of scientific and technical research in the Earth sciences. We demonstrate the occurrence of coloured noise in the translation components between the SLR network and the long-term ITRF2014 origin from 1993.0 to 2015.0 with power law spectral indices close to -1, where white-noise-only linear trend uncertainties are underestimated by a factor of five in contrast to power-law linear trend uncertainties. The observed geocentre motion is expected to be influenced by the SLR observing network, known as the "network effect". Temporal translations in the SLR network may not necessarily average out over long time periods and therefore have the potential to shift the computed reference frame origin from the true long term centre of mass. Comparison with geophysical loading models demonstrates that the variability cannot be fully accounted for by surface mass transport such as changes in atmospheric, hydrologic or glacial loading. Our results demonstrate that the proportion of variance explained by geophysical surface loading is less than 50% in each translational component. Evidence of temporal variability in both the SLR amplitude and trend of the annual signal suggest that a different coloured noise model be considered in place of, or as an extension of, the traditional linear and white-noise-only model to represent the long-term average centre of mass.

Trends in ocean colour and chlorophyll concentration from 1889 to 2000, worldwide.

PubMed

Wernand, Marcel R; van der Woerd, Hendrik J; Gieskes, Winfried W C

2013-01-01

Marine primary productivity is an important agent in the global cycling of carbon dioxide, a major 'greenhouse gas', and variations in the concentration of the ocean's phytoplankton biomass can therefore explain trends in the global carbon budget. Since the launch of satellite-mounted sensors globe-wide monitoring of chlorophyll, a phytoplankton biomass proxy, became feasible. Just as satellites, the Forel-Ule (FU) scale record (a hardly explored database of ocean colour) has covered all seas and oceans--but already since 1889. We provide evidence that changes of ocean surface chlorophyll can be reconstructed with confidence from this record. The EcoLight radiative transfer numerical model indicates that the FU index is closely related to chlorophyll concentrations in open ocean regions. The most complete FU record is that of the North Atlantic in terms of coverage over space and in time; this dataset has been used to test the validity of colour changes that can be translated to chlorophyll. The FU and FU-derived chlorophyll data were analysed for monotonously increasing or decreasing trends with the non-parametric Mann-Kendall test, a method to establish the presence of a consistent trend. Our analysis has not revealed a globe-wide trend of increase or decrease in chlorophyll concentration during the past century; ocean regions have apparently responded differentially to changes in meteorological, hydrological and biological conditions at the surface, including potential long-term trends related to global warming. Since 1889, chlorophyll concentrations have decreased in the Indian Ocean and in the Pacific; increased in the Atlantic Ocean, the Mediterranean, the Chinese Sea, and in the seas west and north-west of Japan. This suggests that explanations of chlorophyll changes over long periods should focus on hydrographical and biological characteristics typical of single ocean regions, not on those of 'the' ocean.

Camouflage, communication and thermoregulation: lessons from colour changing organisms.

PubMed

Stuart-Fox, Devi; Moussalli, Adnan

2009-02-27

Organisms capable of rapid physiological colour change have become model taxa in the study of camouflage because they are able to respond dynamically to the changes in their visual environment. Here, we briefly review the ways in which studies of colour changing organisms have contributed to our understanding of camouflage and highlight some unique opportunities they present. First, from a proximate perspective, comparison of visual cues triggering camouflage responses and the visual perception mechanisms involved can provide insight into general visual processing rules. Second, colour changing animals can potentially tailor their camouflage response not only to different backgrounds but also to multiple predators with different visual capabilities. We present new data showing that such facultative crypsis may be widespread in at least one group, the dwarf chameleons. From an ultimate perspective, we argue that colour changing organisms are ideally suited to experimental and comparative studies of evolutionary interactions between the three primary functions of animal colour patterns: camouflage; communication; and thermoregulation.

Camouflage, communication and thermoregulation: lessons from colour changing organisms

PubMed Central

Stuart-Fox, Devi; Moussalli, Adnan

2008-01-01

Organisms capable of rapid physiological colour change have become model taxa in the study of camouflage because they are able to respond dynamically to the changes in their visual environment. Here, we briefly review the ways in which studies of colour changing organisms have contributed to our understanding of camouflage and highlight some unique opportunities they present. First, from a proximate perspective, comparison of visual cues triggering camouflage responses and the visual perception mechanisms involved can provide insight into general visual processing rules. Second, colour changing animals can potentially tailor their camouflage response not only to different backgrounds but also to multiple predators with different visual capabilities. We present new data showing that such facultative crypsis may be widespread in at least one group, the dwarf chameleons. From an ultimate perspective, we argue that colour changing organisms are ideally suited to experimental and comparative studies of evolutionary interactions between the three primary functions of animal colour patterns: camouflage; communication; and thermoregulation. PMID:19000973

Conflict between background matching and social signalling in a colour-changing freshwater fish

PubMed Central

Rodgers, Gwendolen M.; Morrell, Lesley J.

2016-01-01

The ability to change coloration allows animals to modify their patterning to suit a specific function. Many freshwater fishes, for example, can appear cryptic by altering the dispersion of melanin pigment in the skin to match the visual background. However, melanin-based pigments are also used to signal dominance among competing males; thus colour change for background matching may conflict with colour change for social status signalling. We used a colour-changing freshwater fish to investigate whether colour change for background matching influenced aggressive interactions between rival males. Subordinate males that had recently darkened their skin for background matching received heightened aggression from dominant males, relative to males whose coloration had not changed. We then determined whether the social status of a rival male, the focal male's previous social status, and his previous skin coloration, affected a male's ability to change colour for background matching. Social status influenced skin darkening in the first social encounter, with dominant males darkening more than subordinate males, but there was no effect of social status on colour change in the second social encounter. We also found that the extent of skin colour change (by both dominant and subordinate males) was dependent on previous skin coloration, with dark males displaying a smaller change in coloration than pale males. Our findings suggest that skin darkening for background matching imposes a significant social cost on subordinate males in terms of increased aggression. We also suggest that the use of melanin-based signals during social encounters can impede subsequent changes in skin coloration for other functions, such as skin darkening for background matching. PMID:27429764

Why background colour matters to bees and flowers.

PubMed

Bukovac, Zoë; Shrestha, Mani; Garcia, Jair E; Burd, Martin; Dorin, Alan; Dyer, Adrian G

2017-05-01

Flowers are often viewed by bee pollinators against a variety of different backgrounds. On the Australian continent, backgrounds are very diverse and include surface examples of all major geological stages of the Earth's history, which have been present during the entire evolutionary period of Angiosperms. Flower signals in Australia are also representative of typical worldwide evolutionary spectral adaptations that enable successful pollination. We measured the spectral properties of 581 natural surfaces, including rocks, sand, green leaves, and dry plant materials, sampled from tropical Cairns through to the southern tip of mainland Australia. We modelled in a hexagon colour space, how interactions between background spectra and flower-like colour stimuli affect reliable discrimination and detection in bee pollinators. We calculated the extent to which a given locus would be conflated with the loci of a different flower-colour stimulus using empirically determined colour discrimination regions for bee vision. Our results reveal that whilst colour signals are robust in homogeneous background viewing conditions, there could be significant pressure on plant flowers to evolve saliently-different colours to overcome background spectral noise. We thus show that perceptual noise has a large influence on how colour information can be used in natural conditions.

Colour calibration of a laboratory computer vision system for quality evaluation of pre-sliced hams.

PubMed

Valous, Nektarios A; Mendoza, Fernando; Sun, Da-Wen; Allen, Paul

2009-01-01

Due to the high variability and complex colour distribution in meats and meat products, the colour signal calibration of any computer vision system used for colour quality evaluations, represents an essential condition for objective and consistent analyses. This paper compares two methods for CIE colour characterization using a computer vision system (CVS) based on digital photography; namely the polynomial transform procedure and the transform proposed by the sRGB standard. Also, it presents a procedure for evaluating the colour appearance and presence of pores and fat-connective tissue on pre-sliced hams made from pork, turkey and chicken. Our results showed high precision, in colour matching, for device characterization when the polynomial transform was used to match the CIE tristimulus values in comparison with the sRGB standard approach as indicated by their ΔE(ab)(∗) values. The [3×20] polynomial transfer matrix yielded a modelling accuracy averaging below 2.2 ΔE(ab)(∗) units. Using the sRGB transform, high variability was appreciated among the computed ΔE(ab)(∗) (8.8±4.2). The calibrated laboratory CVS, implemented with a low-cost digital camera, exhibited reproducible colour signals in a wide range of colours capable of pinpointing regions-of-interest and allowed the extraction of quantitative information from the overall ham slice surface with high accuracy. The extracted colour and morphological features showed potential for characterizing the appearance of ham slice surfaces. CVS is a tool that can objectively specify colour and appearance properties of non-uniformly coloured commercial ham slices.

Chromaticity of gravitational microlensing events

NASA Astrophysics Data System (ADS)

Han, Cheongho; Park, Seong-Hong; Jeong, Jang-Hae

2000-07-01

In this paper, we investigate the colour changes of gravitational microlensing events caused by the two different mechanisms of differential amplification for a limb-darkened extended source and blending. From this investigation, we find that the colour changes of limb-darkened extended source events (colour curves) have dramatically different characteristics depending on whether the lens transits the source star or not. We show that for a source transit event, the lens proper motion can be determined by simply measuring the turning time of the colour curve instead of fitting the overall colour or light curves. We also find that even for a very small fraction of blended light, the colour changes induced by blending are equivalent to those induced by limb darkening, causing serious distortion in the observed colour curve. Therefore, to obtain useful information about the lens and source star from the colour curve of an event, it will be essential to correct for blending. We discuss various methods of blending correction.

Colour stability and opacity of resin cements and flowable composites for ceramic veneer luting after accelerated ageing.

PubMed

Archegas, Lucí Regina Panka; Freire, Andrea; Vieira, Sergio; Caldas, Danilo Biazzetto de Menezes; Souza, Evelise Machado

2011-11-01

Colour changes of the luting material can become clinically visible affecting the aesthetic appearance of thin ceramic laminates. The aim of this in vitro study was to evaluate the colour stability and opacity of light- and dual-cured resin cements and flowable composites after accelerated ageing. The luting agents were bonded (0.2 mm thick) to ceramic disks (0.75 mm thick) built with the pressed-ceramic IPS Aesthetic Empress (n=7). Colour measurements were determined using a FTIR spectrophotometer before and after accelerated ageing in a weathering machine with a total energy of 150 kJ. Changes in colour (ΔE) and opacity (ΔO) were obtained using the CIE L*a*b* system. The results were submitted to one-way ANOVA, Tukey HSD test and Student's t test (α=5%). All the materials showed significant changes in colour and opacity. The ΔE of the materials ranged from 0.41 to 2.40. The highest colour changes were attributed to RelyX ARC and AllCem, whilst lower changes were found in Variolink Veneer, Tetric Flow and Filtek Z350 Flow. The opacity of the materials ranged from -0.01 to 1.16 and its variation was not significant only for Opallis Flow and RelyX ARC. The accelerated ageing led to colour changes in all the evaluated materials, although they were considered clinically acceptable (ΔE<3). Amongst the dual-cured resin cements, Variolink II demonstrated the highest colour stability. All the flowable composites showed proper colour stability for the luting of ceramic veneers. After ageing, an increase in opacity was observed for most of the materials. Copyright © 2011 Elsevier Ltd. All rights reserved.

Colour constancy in insects.

PubMed

Chittka, Lars; Faruq, Samia; Skorupski, Peter; Werner, Annette

2014-06-01

Colour constancy is the perceptual phenomenon that the colour of an object appears largely unchanged, even if the spectral composition of the illuminating light changes. Colour constancy has been found in all insect species so far tested. Especially the pollinating insects offer a remarkable opportunity to study the ecological significance of colour constancy since they spend much of their adult lives identifying and choosing between colour targets (flowers) under continuously changing ambient lighting conditions. In bees, whose colour vision is best studied among the insects, the compensation provided by colour constancy is only partial and its efficiency depends on the area of colour space. There is no evidence for complete 'discounting' of the illuminant in bees, and the spectral composition of the light can itself be used as adaptive information. In patchy illumination, bees adjust their spatial foraging to minimise transitions between variously illuminated zones. Modelling allows the quantification of the adaptive benefits of various colour constancy mechanisms in the economy of nature. We also discuss the neural mechanisms and cognitive operations that might underpin colour constancy in insects.

Poor environmental tracking can make extinction risk insensitive to the colour of environmental noise

PubMed Central

van de Pol, Martijn; Vindenes, Yngvild; Sæther, Bernt-Erik; Engen, Steinar; Ens, Bruno J.; Oosterbeek, Kees; Tinbergen, Joost M.

2011-01-01

The relative importance of environmental colour for extinction risk compared with other aspects of environmental noise (mean and interannual variability) is poorly understood. Such knowledge is currently relevant, as climate change can cause the mean, variability and temporal autocorrelation of environmental variables to change. Here, we predict that the extinction risk of a shorebird population increases with the colour of a key environmental variable: winter temperature. However, the effect is weak compared with the impact of changes in the mean and interannual variability of temperature. Extinction risk was largely insensitive to noise colour, because demographic rates are poor in tracking the colour of the environment. We show that three mechanisms—which probably act in many species—can cause poor environmental tracking: (i) demographic rates that depend nonlinearly on environmental variables filter the noise colour, (ii) demographic rates typically depend on several environmental signals that do not change colour synchronously, and (iii) demographic stochasticity whitens the colour of demographic rates at low population size. We argue that the common practice of assuming perfect environmental tracking may result in overemphasizing the importance of noise colour for extinction risk. Consequently, ignoring environmental autocorrelation in population viability analysis could be less problematic than generally thought. PMID:21561978

Attention during adaptation weakens negative afterimages of perceptually colour-spread surfaces.

PubMed

Lak, Armin

2008-06-01

The visual system can complete coloured surfaces from stimulus fragments, inducing the subjective perception of a colour-spread figure. Negative afterimages of these induced colours were first reported by S. Shimojo, Y. Kamitani, and S. Nishida (2001). Two experiments were conducted to examine the effect of attention on the duration of these afterimages. The results showed that shifting attention to the colour-spread figure during the adaptation phase weakened the subsequent afterimage. On the basis of previous findings that the duration of these afterimages is correlated with the strength of perceptual filling-in (grouping) among local inducers during the adaptation phase, it is proposed that attention weakens perceptual filling-in during the adaptation phase and thereby prevents the stimulus from being segmented into an illusory figure. (PsycINFO Database Record (c) 2008 APA, all rights reserved).

Modelling and analysis of the wetting characteristics of ink for display applications with the surface evolution technique

NASA Astrophysics Data System (ADS)

Shin, Dong-Youn; Brakke, Kenneth A.

2009-06-01

Piezo drop-on-demand inkjet printing technology has attracted the attention of display industries for the production of colour filters for thin film transistor liquid crystal displays (TFT LCD) because of the opportunity of reducing manufacturing cost. Colourant ink droplets ejected from inkjet nozzles selectively fill subpixels surrounded with black matrix (BM). Surface energy differences between the glass substrate and the BM generally guide this ink filling process. This colourant ink filling process, however, results from the complex hydrodynamic interaction of ink with the substrate and the BM. Neither computationally expensive numerical methods nor time and cost expensive experiments are suitable for the derivation of optimum surface conditions at the early development stage. In this study, a more concise surface evolution technique is proposed and ways to find the optimum surface conditions for the fabrication of TFT LCD colour filters and polymer light emitting devices are discussed, which might be useful for chemists and developers of ink and BM material, as well as for process engineers in display industries.

Col-OSSOS: A new ugrJ taxonomy for trans-Neptunian objects

NASA Astrophysics Data System (ADS)

Fraser, Wesley Cristopher; Bannister, Michele T.; Marsset, Michael; Pike, Rosemary E.; Schwamb, Megan E.; Kavelaars, J. J.; Benecchi, Susan D.; Delsanti, Audrey; Lehner, Matt J.; Wang, Shiang-Yu; Thirouin, Audrey; Guilbert-Lepoutre, Aurelie; Peixinho, Nuno; Vernazza, Pierre

2016-10-01

The surfaces of trans-Neptunian objects (TNOs) are poorly understood. Very little has been discerned about the compositions of most small TNOs. In recent years however, some concrete knowledge about the surface colour distribution of TNOs has come to light. It is now generally accepted that small TNOs fall into at least three classes of object based on their surface colours and albedo. Despite nearly two decades of gathering TNO surface information however, a taxonomy has still not been agreed upon. From Col-OSSOS u, g, r, and J photometry, we find significantly different clustering of (u-g) colour in the optically red, dynamically cold TNOs as compared to similarly optically coloured dynamically excited TNOs. One of the goals of the Colours of the Outer Solar System Origins Survey is the development of a robust TNO taxonomy. This 4 year program which started in 2014B is simultaneously using the Gemini-North and Canada-France-Hawaii telescopes to gather near simultaneous u, g, r, and J spectral photometry of all targets in the Outer Solar System Origins Survey (OSSOS) brighter than r'=23.6 (120 expected). The focus of Col-OSSOS is completeness and consistency, with the same SNR=25 being reached in all bands, for all targets brighter than our depth limit. Col-OSSOS will provide the first brightness-complete, compositional-dynamical map of the Outer Solar System, from which key hypotheses about the Solar System's cosmogony can be tested. After an overview of the survey's design and techniques, we will present the observed colours from the first complete block. Even with just ~30 targets, the precise photometry afforded by Col-OSSOS has already revealed the existence of 3 separate TNO taxons or classes, which become obvious when their (u-g), (g-r), and (r-J) colours are considered together. In particular, the so-called cold classical TNOs, which stand out because of their dynamically quiescent orbits, while possessing similar (g-r) and (r-J) colours as other red TNOs, exhibit extremely red (u-g) colours, roughly 0.5 magnitudes redder than the typical (u-g) of the red dynamically excited objects. These classes appear to exhibit a continuum in colour, rather than occupying similar mean colours for all class members.

Evaluation of the colour change in enamel and dentine promoted by the interaction between 2% chlorhexidine and auxiliary chemical solutions.

PubMed

Souza, Matheus; Cecchin, Doglas; Barbizam, Joao V B; Almeida, José F A; Zaia, Alexandre Augusto; Gomes, Brenda P F A; Ferraz, Caio C R

2013-12-01

To evaluate the colour change in enamel and dentine, promoted by interaction of 2% chlorhexidine gluconate (CHX) with 5.25% sodium hypochlorite (NaOCl) and 17% ethylenediaminetetraacetic acid (EDTA). Fragments containing enamel and dentine were obtained from the crowns of extracted bovine incisors. Before and after immersion of the samples in the substances, they were evaluated with reference to the colour of the enamel and dentine. The values obtained in numerical scores were subjected to statistical analysis using Wilcoxon test. A colour change in the enamel and dentine in groups treated with CHX gel + NaOCl and CHX gel + NaOCl + EDTA, and a change in colour only in the dentine in groups treated with CHX solution + NaOCl and CHX solution + NaOCl + EDTA. When used prior to NaOCl, CHX has the ability to induce a colour change in dental structures. © 2011 The Authors. Australian Endodontic Journal © 2011 Australian Society of Endodontology.

Short term memory for single surface features and bindings in ageing: A replication study.

PubMed

Isella, Valeria; Molteni, Federica; Mapelli, Cristina; Ferrarese, Carlo

2015-06-01

In the present study we replicated a previous experiment investigating visuo-spatial short term memory binding in young and older healthy individuals, in the attempt to verify the pattern of impairment that can be observed in normal elderly for short term memory for single items vs short term memory for bindings. Assessing a larger sample size (25 young and 25 older subjects), using a more appropriate measure of accuracy for a change detection task (A'), and adding the evaluation of speed of performance, we confirmed that old normals show a decline in short term memory for bindings of shape and colour that is of comparable extent, and not major, to the decline in memory for single shapes and single colours. The absence of a specific deficit of short term memory for conjunctions of surface features seems to distinguish cognitive ageing from Alzheimer's Disease. Copyright © 2015 Elsevier Inc. All rights reserved.

The Colour and Stereo Surface Imaging System (CaSSIS) for the ExoMars Trace Gas Orbiter

USGS Publications Warehouse

Thomas, N.; Cremonese, G.; Ziethe, R.; Gerber, M.; Brändli, M.; Bruno, G.; Erismann, M.; Gambicorti, L.; Gerber, T.; Ghose, K.; Gruber, M.; Gubler, P.; Mischler, H.; Jost, J.; Piazza, D.; Pommerol, A.; Rieder, M.; Roloff, V.; Servonet, A.; Trottmann, W.; Uthaicharoenpong, T.; Zimmermann, C.; Vernani, D.; Johnson, M.; Pelò, E.; Weigel, T.; Viertl, J.; De Roux, N.; Lochmatter, P.; Sutter, G.; Casciello, A.; Hausner, T.; Ficai Veltroni, I.; Da Deppo, V.; Orleanski, P.; Nowosielski, W.; Zawistowski, T.; Szalai, S.; Sodor, B.; Tulyakov, S.; Troznai, G.; Banaskiewicz, M.; Bridges, J.C.; Byrne, S.; Debei, S.; El-Maarry, M. R.; Hauber, E.; Hansen, C.J.; Ivanov, A.; Keszthelyil, L.; Kirk, Randolph L.; Kuzmin, R.; Mangold, N.; Marinangeli, L.; Markiewicz, W. J.; Massironi, M.; McEwen, A.S.; Okubo, Chris H.; Tornabene, L.L.; Wajer, P.; Wray, J.J.

2017-01-01

The Colour and Stereo Surface Imaging System (CaSSIS) is the main imaging system onboard the European Space Agency’s ExoMars Trace Gas Orbiter (TGO) which was launched on 14 March 2016. CaSSIS is intended to acquire moderately high resolution (4.6 m/pixel) targeted images of Mars at a rate of 10–20 images per day from a roughly circular orbit 400 km above the surface. Each image can be acquired in up to four colours and stereo capability is foreseen by the use of a novel rotation mechanism. A typical product from one image acquisition will be a 9.5 km×∼45 km">9.5 km×∼45 km9.5 km×∼45 km swath in full colour and stereo in one over-flight of the target thereby reducing atmospheric influences inherent in stereo and colour products from previous high resolution imagers. This paper describes the instrument including several novel technical solutions required to achieve the scientific requirements.

Cognitive demand does not influence the responsiveness of homonymous Ia afferents pathway during postural dual task in young and elderly adults.

PubMed

Baudry, Stéphane; Gaillard, Vinciane

2014-02-01

This study was designed to investigate the influence of a cognitive task on the responsiveness of the homonymous Ia afferents pathway during upright standing in young and elderly adults. Twelve young and twelve elderly adults stood upright on a foam surface positioned over a force platform, and performed a colour-naming test (cognitive task) with two cognitive loads: congruent and incongruent colour conditions. The rate of correct response in naming colour (accuracy) and associated reaction time (RT) were recorded for the cognitive task. The excursion of the centre of pressure and surface electromyogramme (EMG) of leg muscles were measured. Modulation in the efficacy of homonymous Ia afferents to discharge spinal motor neurones was assessed by means of the Hoffmann (H) reflex method. The accuracy and RT were similar in the congruent condition between young and elderly adults (p > 0.05), and increased for both age groups in the incongruent condition, but more so for elderly adults (p = 0.014). In contrast, the H reflex amplitude did not change with the cognitive load. The excursions of the centre of pressure in the sagittal plane and muscle EMG did not vary with colour conditions in both groups (p > 0.05). This study indicates a lack of modulation in the efficacy of group Ia afferent to activate soleus motor neurones with the cognitive demand of a concurrent task during upright standing in young and elderly adults.

Colour in flux: describing and printing colour in art

NASA Astrophysics Data System (ADS)

Parraman, Carinna

2008-01-01

This presentation will describe artists, practitioners and scientists, who were interested in developing a deeper psychological, emotional and practical understanding of the human visual system who were working with wavelength, paint and other materials. From a selection of prints at The Prints and Drawings Department at Tate London, the presentation will refer to artists who were motivated by issues relating to how colour pigment was mixed and printed, to interrogate and explain colour perception and colour science, and in art, how artists have used colour to challenge the viewer and how a viewer might describe their experience of colour. The title Colour in Flux refers, not only to the perceptual effect of the juxtaposition of one colour pigment with another, but also to the changes and challenges for the print industry. In the light of screenprinted examples from the 60s and 70s, the presentation will discuss 21 st century ideas on colour and how these notions have informed the Centre for Fine Print Research's (CFPR) practical research in colour printing. The latter part of this presentation will discuss the implications for the need to change methods in mixing inks that moves away from existing colour spaces, from non intuitive colour mixing to bespoke ink sets, colour mixing approaches and colour mixing methods that are not reliant on RGB or CMYK.

The Formation and Binding of Gold Nanoparticles onto Wool Fibres

NASA Astrophysics Data System (ADS)

Johnston, James H.; Burridge, Kerstin A.; Kelly, Fern M.

2009-07-01

This paper presents the novel use of nanosize gold with different plasmon resonance colours, as stable colourfast colourants on wool fibres for use in high quality fabrics and textiles. The gold nanoparticles are synthesised by the controlled reduction of Au3+ in the AuCl4- complex to Au0 onto the surface of the wool where they attach to the S in the cystine amino acids in wool keratin proteins. Scanning electronmicroscopy shows the nanoparticles are present on the cuticles of the fibre surface and are concentrated at the edges of these cuticles. EDS analysis shows a strong correlation of Au with S and X-ray photoelectron spectroscopy suggests Au-S bond formation. Hence the nanogold colourants are chemically bound to the wool fibre surface and do not fade as traditional organic dyes do. A range of coloured fibres have been produced.

The Formation and Binding of Gold Nanoparticles onto Wool Fibres

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnston, James H.; Burridge, Kerstin A.; Kelly, Fern M.

2009-07-23

This paper presents the novel use of nanosize gold with different plasmon resonance colours, as stable colourfast colourants on wool fibres for use in high quality fabrics and textiles. The gold nanoparticles are synthesised by the controlled reduction of Au{sup 3+} in the AuCl{sub 4}{sup -} complex to Au{sup 0} onto the surface of the wool where they attach to the S in the cystine amino acids in wool keratin proteins. Scanning electronmicroscopy shows the nanoparticles are present on the cuticles of the fibre surface and are concentrated at the edges of these cuticles. EDS analysis shows a strong correlationmore » of Au with S and X-ray photoelectron spectroscopy suggests Au-S bond formation. Hence the nanogold colourants are chemically bound to the wool fibre surface and do not fade as traditional organic dyes do. A range of coloured fibres have been produced.« less

The colour of blood in skin: a comparison of Allen's test and photonics simulations.

PubMed

Välisuo, Petri; Kaartinen, Ilkka; Kuokkanen, Hannu; Alander, Jarmo

2010-11-01

The colour of the skin reflects many physiological and pathological states of an individual. Usually, the skin colour is examined by the bare eye alone. Several scaling systems have been developed to quantify the sensory evaluation of skin colour. In this work, the reflectance of the skin is measured directly using an objective instrument. Haemoglobin inside the dermal circulation is one of the key factors of skin colour and it also has a major role in the appearance of many skin lesions and scars. To quantitatively measure and analyse such conditions, the relation between the skin colour and the haemoglobin concentration in the skin needs to be resolved. To examine the effect of blood concentration on the skin colour, five Allen's tests were performed on 20 persons. The skin colour change was measured using a spectrophotometer by changing the blood concentration by the Allen's test. Light interaction with the skin was simulated with a Monte Carlo model, tuning the blood concentration parameter until the simulated and the measured spectra matched, yielding the relationship between the skin colour and the blood concentration. The simulation produced spectra similar to those measured. The change in the blood concentration in the simulation model and in the skin produced changes similar to the spectra. The reflectance of the skin was found to be a nonlinear function of the blood concentration. The relationship found between skin colour and blood concentration makes it possible to quantify those skin conditions expressed by blood volume better than plain colour. © 2010 John Wiley & Sons A/S.

The effect of skin surface topography and skin colouration cues on perception of male facial age, health and attractiveness.

PubMed

Fink, B; Matts, P J; Brauckmann, C; Gundlach, S

2018-04-01

Previous studies investigating the effects of skin surface topography and colouration cues on the perception of female faces reported a differential weighting for the perception of skin topography and colour evenness, where topography was a stronger visual cue for the perception of age, whereas skin colour evenness was a stronger visual cue for the perception of health. We extend these findings in a study of the effect of skin surface topography and colour evenness cues on the perceptions of facial age, health and attractiveness in males. Facial images of six men (aged 40 to 70 years), selected for co-expression of lines/wrinkles and discolouration, were manipulated digitally to create eight stimuli, namely, separate removal of these two features (a) on the forehead, (b) in the periorbital area, (c) on the cheeks and (d) across the entire face. Omnibus (within-face) pairwise combinations, including the original (unmodified) face, were presented to a total of 240 male and female judges, who selected the face they considered younger, healthier and more attractive. Significant effects were detected for facial image choice, in response to skin feature manipulation. The combined removal of skin surface topography resulted in younger age perception compared with that seen with the removal of skin colouration cues, whereas the opposite pattern was found for health preference. No difference was detected for the perception of attractiveness. These perceptual effects were seen particularly on the forehead and cheeks. Removing skin topography cues (but not discolouration) in the periorbital area resulted in higher preferences for all three attributes. Skin surface topography and colouration cues affect the perception of age, health and attractiveness in men's faces. The combined removal of these features on the forehead, cheeks and in the periorbital area results in the most positive assessments. © 2018 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Wine bottle colour and oxidative spoilage: whole bottle light exposure experiments under controlled and uncontrolled temperature conditions.

PubMed

Dias, Daniel A; Clark, Andrew C; Smith, Trevor A; Ghiggino, Kenneth P; Scollary, Geoffrey R

2013-06-15

Exposure of a Chardonnay wine to light from a mercury vapour lamp under controlled temperature conditions showed that colour enhancement was dependent on bottle colour. The increase in colouration was Antique Green

Laser induced single spot oxidation of titanium

NASA Astrophysics Data System (ADS)

Jwad, Tahseen; Deng, Sunan; Butt, Haider; Dimov, S.

2016-11-01

Titanium oxides have a wide range of applications in industry, and they can be formed on pure titanium using different methods. Laser-induced oxidation is one of the most reliable methods due to its controllability and selectivity. Colour marking is one of the main applications of the oxidation process. However, the colourizing process based on laser scanning strategies is limited by the relative large processing area in comparison to the beam size. Single spot oxidation of titanium substrates is proposed in this research in order to increase the resolution of the processed area and also to address the requirements of potential new applications. The method is applied to produce oxide films with different thicknesses and hence colours on titanium substrates. High resolution colour image is imprinted on a sheet of pure titanium by converting its pixels' colours into laser parameter settings. Optical and morphological periodic surface structures are also produced by an array of oxide spots and then analysed. Two colours have been coded into one field and the dependencies of the reflected colours on incident and azimuthal angles of the light are discussed. The findings are of interest to a range of application areas, as they can be used to imprint optical devices such as diffusers and Fresnel lenses on metallic surfaces as well as for colour marking.

Colour-stability and gloss-retention of silorane and dimethacrylate composites with accelerated aging.

PubMed

Furuse, Adilson Y; Gordon, Kathryn; Rodrigues, Flávia P; Silikas, Nick; Watts, David C

2008-11-01

To evaluate the colour-stability and gloss-retention of silorane versus dimethacrylate composites exposed to accelerated aging from daylight radiation. Five disc-shaped specimens of photo-cured resin-composites were prepared and manually polished for each material (Filtek Silorane, Herculite XRV, Tetric Evoceram and QuiXfil). Colour and gloss were evaluated before and after periods (baseline, 24, 72, 120 and 192 h) of accelerated photo-aging in xenon light following ISO 7491:2000. Colour measurements were performed with a colourimeter according to the CIE-Lab colour-space. The colour change (DeltaE) for each time was calculated. The surface gloss was measured using a glossmeter. Results were evaluated using one-way ANOVA and Tukey tests (alpha=0.05). Correlations between logtime, DeltaE and gloss were evaluated using Pearson's correlation (alpha=0.05). Materials generally decreased in L and a and increased in b. The strong exception was Filtek Silorane which maintained a and b. DeltaE was found to be a positive linear function of logtime for all materials. Materials varied in the magnitude and rate of increase of DeltaE with logtime: QuiXfil>Tetric EvoCeram>(Filtek Silorane>or=Herculite XRV). DeltaE remained<3.3 for Filtek Silorane and Herculite XRV. Gloss was found to be a negative linear function of logtime. Gloss was maximal in the sequence: Filtek Silorane approximately Tetric EvoCeram>Herculite XRV>QuiXfil. Silorane gave the best overall performance in stability over time, compared to a set of representative dimethacrylate composites.

The effect of accelerated ageing on colour stability of visible light-cured (VLC) chairside denture liners.

PubMed

Kostoulas, Ioannis; Polyzois, Gregory; Mitsoudis, Anastasios; Kavoura, Victoria; Frangou, Maria

2012-06-01

The purpose of this study was to assess the colour stability of seven visible light-cured (VLC) hard and soft denture liners by an in vitro accelerated ageing test and compare them with two autopolymerised hard and soft liners. Ten specimens of each material were fabricated. The initial colour was measured with a tri-stimulus colorimeter. One set of five specimens was placed in distilled water at 37°C in the dark for 15 days, while the remaining were subjected to UV/visible light-accelerated ageing initially for 24 h and then for 144 h. Colour change (ΔΕ) was calculated. Data were statistically analysed by anova, Tukey and t-tests at α = 0.05. All the liners showed clinically acceptable colour change (ΔΕ ≤ 6.8) in distilled water. The colour changes after ageing for Triad DuaLine, Lightdon U, Ufi Gel H and Light Liner Hard were clinically unacceptable (ΔΕ ≥ 6.8), whereas LightLiner Soft, Astron LC Soft, Triad Resiline and Flexacryl Soft presented slighter and clinically acceptable colour change (ΔΕ ≤ 6.8). Accelerated ageing affected significantly the colour stability of all denture liners tested except Astron LC Soft. Soft VLC denture liners were more colour-stable than hard VLC liners. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

Plasmonic gold nanoparticles for detection of fungi and human cutaneous fungal infections.

PubMed

Sojinrin, Tobiloba; Conde, João; Liu, Kangze; Curtin, James; Byrne, Hugh J; Cui, Daxiang; Tian, Furong

2017-07-01

Fungi, which are common in the environment, can cause a multitude of diseases. Warm, humid conditions allow fungi to grow and infect humans via the respiratory, digestive and reproductive tracts, genital area and other bodily interfaces. Fungi can be detected directly by microscopy, using the potassium hydroxide test, which is the gold standard and most popular method for fungal screening. However, this test requires trained personnel operating specialist equipment, including a fluorescent microscope and culture facilities. As most acutely infected patients seek medical attention within the first few days of symptoms, the optimal diagnostic test would be rapid and self-diagnostic simplifying and improving the therapeutic outcome. In suspensions of gold nanoparticles, Aspergillus niger can cause a colour change from red to blue within 2 min, as a result of changes in nanoparticle shape. A similar colour change was observed in the supernatant of samples of human toenails dispersed in water. Scanning electron microscopy, UV/Vis and Raman spectroscopy were employed to monitor the changes in morphology and surface plasmon resonance of the nanoparticles. The correlation of colour change with the fungal infection was analysed using the absorbance ratio at 520 nm/620 nm. We found a decrease in the ratio when the fungi concentration increased from 1 to 16 CFU/mL, with a detection limit of 10 CFU/mL. The test had an 80% sensitivity and a 95% specificity value for the diagnosis of athlete's foot in human patients. This plasmonic gold nanoparticle-based system for detection of fungal infections measures the change in shape of gold nanoparticles and generates coloured solutions with distinct tonality. Our application has the potential to contribute to self-diagnosis and hygiene control in laboratories/hospitals with fewer resources, just using the naked eye. Graphical abstract Colorimetric method for fungi detection with gold nano particles.

Colour Measurements and Modeling

NASA Astrophysics Data System (ADS)

Jha, Shyam N.

The most common property to measure quality of any material is its appearance. Appearance includes colour, shape, size and surface conditions. The analysis of colour is especially an important consideration when determining the efficacy of variety of postharvest treatments. Consumers can easily be influenced by preconceived ideas of how a particular fruit or vegetable or a processed food should appear, and marketers often attempt to improve upon what nature has painted. Recently colour measurements have also been used as quality parameters and indicator of some inner constituents of the material. In spite of the significance of colour in food industries, many continue to analyze it inadequately. This chapter deals with theory of colour, colour scales and its measurement, sampling techniques, and modeling of colour values for correlating them with some internal quality parameters of selected fruits.

Impregnation with antimicrobials has an impact on degree of conversion and colour stability of acrylic liner.

PubMed

Salim, Nesreen; Satterthwaite, Julian; Rautemaa, Riina; Silikas, Nick

2012-01-01

This study investigated the impact of impregnation of a poly(ethyl methacrylate) /tetrahydrofurfuryl methacrylate (PEM/THFM) polymer with chlorhexidine or fluconazole on the degree of conversion (DC) and colour stability (ΔE). The DC of uncured (0 h) and cured (24 h) samples was analysed by Fourier transform infrared spectroscopy (FTIR) and colour stability was analysed colorimetrically. The DC percentage of the control samples was significantly greater than those containing chlorhexidine and fluconazole (p≤0.05). The control discs exhibited only slight colour change compared to the impregnated discs which showed marked colour change (p≤0.05). A strong negative correlation between the extent of colour change and the degree of conversion was detected (r=0.97). The DC and colour stability were influenced by the addition of chlorhexidine or fluconazole. However, the final values were comparable to other commonly used acrylic liners and within acceptable ranges. PEM/THFM can be considered as a biocompatible drug delivery system.

Enamel colour changes after debonding using various bonding systems.

PubMed

Zaher, Abbas R; Abdalla, Essam M; Abdel Motie, Maha A; Rehman, Noman Atiq; Kassem, Hassan; Athanasiou, Athanasios E

2012-06-01

To test the possible association between enamel colour alteration and resin tag depth. In vitro laboratory study. Department of Orthodontics, Alexandria University, Egypt. Fifty freshly extracted human premolar teeth were equally divided randomly into a control and four experimental groups. Teeth in group I received only enamel prophylaxis. Teeth in groups II and III were etched with 35% phosphoric acid for 15 and 60 seconds, respectively. Teeth in group IV were conditioned with Prompt L-pop self-etching primer and in group V with Xeno III self-etching primer, according to the manufacturer's instructions. Orthodontic brackets were bonded to the teeth in all experimental groups using Transbond XT composite. Following bracket debonding, finishing and polishing were performed. Enamel colour was evaluated spectrophotometrically at baseline and then after debonding, with the corresponding colour differences ΔE calculated. Resin tags lengths were measured on sectioned teeth in each experimental group under scanning electron microscope. All experimental groups showed clinically perceivable colour change after debonding and finishing as all values were exceeded the clinical colour detection threshold of ΔE = 3.7 units. Significant differences (P<0.05) in resin tag length were found in all experimental groups. Significant moderate correlation was found between colour change and resin tags length when all teeth were combined and tested, irrespective of group. Moderate evidence exists that shorter resin tag penetration produces less change in enamel colour following clean-up and polishing. Self-etch primers produce less resin penetration and these systems may produce less iatrogenic colour change in enamel following orthodontic treatment.

Selection for Social Signalling Drives the Evolution of Chameleon Colour Change

PubMed Central

Stuart-Fox, Devi; Moussalli, Adnan

2008-01-01

Rapid colour change is a remarkable natural phenomenon that has evolved in several vertebrate and invertebrate lineages. The two principal explanations for the evolution of this adaptive strategy are (1) natural selection for crypsis (camouflage) against a range of different backgrounds and (2) selection for conspicuous social signals that maximise detectability to conspecifics, yet minimise exposure to predators because they are only briefly displayed. Here we show that evolutionary shifts in capacity for colour change in southern African dwarf chameleons (Bradypodion spp.) are associated with increasingly conspicuous signals used in male contests and courtship. To the chameleon visual system, species showing the most dramatic colour change display social signals that contrast most against the environmental background and amongst adjacent body regions. We found no evidence for the crypsis hypothesis, a finding reinforced by visual models of how both chameleons and their avian predators perceive chameleon colour variation. Instead, our results suggest that selection for conspicuous social signals drives the evolution of colour change in this system, supporting the view that transitory display traits should be under strong selection for signal detectability. PMID:18232740

The colour preference control based on two-colour combinations

NASA Astrophysics Data System (ADS)

Hong, Ji Young; Kwak, Youngshin; Park, Du-Sik; Kim, Chang Yeong

2008-02-01

This paper proposes a framework of colour preference control to satisfy the consumer's colour related emotion. A colour harmony algorithm based on two-colour combinations is developed for displaying the images with several complementary colour pairs as the relationship of two-colour combination. The colours of pixels belonging to complementary colour areas in HSV colour space are shifted toward the target hue colours and there is no colour change for the other pixels. According to the developed technique, dynamic emotions by the proposed hue conversion can be improved and the controlled output image shows improved colour emotions in the preference of the human viewer. The psychophysical experiments are conducted to investigate the optimal model parameters to produce the most pleasant image to the users in the respect of colour emotions.

Pollinator responses to floral colour change, nectar, and scent promote reproductive fitness in Quisqualis indica (Combretaceae).

PubMed

Yan, Juan; Wang, Gang; Sui, Yi; Wang, Menglin; Zhang, Ling

2016-04-13

Floral colour change is visual signals for pollinators to avoid old flowers and increase pollination efficiency. Quisqualis indica flowers change colour from white to pink to red may be associated with a shift from moth to butterfly pollination. To test this hypothesis, we investigated Q. indica populations in Southwest China. Flowers secreted nectar continuously from the evening of anthesis until the following morning, then decreased gradually with floral colour change. The scent compounds in the three floral colour stages were similar; however, the scent composition was different, and the scent emission rate decreased from the white to red stage. Dichogamy in Q. indica prevents self-pollination and interference of male and female functions. Controlled pollinations demonstrated that this species is self-incompatible and needs pollinators for seed production. Different pollinators were attracted in each floral colour stage; mainly moths at night and bees and butterflies during the day. Observations of open-pollinated inflorescences showed that white flowers had a higher fruit set than pink or red flowers, indicating the high contribution of moths to reproductive success. We concluded that the nectar and scent secretion are related to floral colour change in Q. indica, in order to attract different pollinators and promote reproductive fitness.

Rethinking Colour Constancy.

PubMed

Logvinenko, Alexander D; Funt, Brian; Mirzaei, Hamidreza; Tokunaga, Rumi

2015-01-01

Colour constancy needs to be reconsidered in light of the limits imposed by metamer mismatching. Metamer mismatching refers to the fact that two objects reflecting metameric light under one illumination may reflect non-metameric light under a second; so two objects appearing as having the same colour under one illuminant can appear as having different colours under a second. Yet since Helmholtz, object colour has generally been believed to remain relatively constant. The deviations from colour constancy registered in experiments are usually thought to be small enough that they do not contradict the notion of colour constancy. However, it is important to determine how the deviations from colour constancy relate to the limits metamer mismatching imposes on constancy. Hence, we calculated metamer mismatching's effect for the 20 Munsell papers and 8 pairs of illuminants employed in the colour constancy study by Logvinenko and Tokunaga and found it to be so extensive that the two notions-metamer mismatching and colour constancy-must be mutually exclusive. In particular, the notion of colour constancy leads to some paradoxical phenomena such as the possibility of 20 objects having the same colour under chromatic light dispersing into a hue circle of colours under neutral light. Thus, colour constancy refers to a phenomenon, which because of metamer mismatching, simply cannot exist. Moreover, it obscures the really important visual phenomenon; namely, the alteration of object colours induced by illumination change. We show that colour is not an independent, intrinsic attribute of an object, but rather an attribute of an object/light pair, and then define a concept of material colour in terms of equivalence classes of such object/light pairs. We suggest that studying the shift in material colour under a change in illuminant will be more fruitful than pursuing colour constancy's false premise that colour is an intrinsic attribute of an object.

Discolouration of orthodontic adhesives caused by food dyes and ultraviolet light.

PubMed

Faltermeier, Andreas; Rosentritt, Martin; Reicheneder, Claudia; Behr, Michael

2008-02-01

Enamel discolouration after debonding of orthodontic attachments could occur because of irreversible penetration of resin tags into the enamel structure. Adhesives could discolour because of food dyes or ultraviolet irradiation. The aim of this study was to investigate the colour stability of adhesives during ultraviolet irradiation and exposure to food colourants. Four different adhesives were exposed in a Suntest CPS+ ageing device to a xenon lamp to simulate natural daylight (Transbond XT, Enlight, RelyX Unicem, and Meron Plus AC). Tomato ketchup, Coca Cola, and tea were chosen as the food colourants. After 72 hours of exposure, colour measurements were performed by means of a spectrophotometer according to the Commission Internationale de l'Eclairage L*a*b* system and colour changes (DeltaE*) were computed. Statistical differences were investigated using two-way analysis of variance (ANOVA) and Friedman test. Unsatisfactory colour stability after in vitro exposure to food colourants and ultraviolet light was observed for the conventional adhesive systems, Transbond XT and Enlight. RelyX Unicem showed the least colour change and the resin-reinforced glass-ionomer cement (GIC), Meron Plus AC, the greatest colour change. The investigated adhesives seem to be susceptible to both internal and external discolouration. These in vitro findings indicate that the tested conventional adhesive systems reveal unsatisfactory colour stability which should be improved to avoid enamel discolouration.

Visual processing in Alzheimer's disease: surface detail and colour fail to aid object identification.

PubMed

Adlington, Rebecca L; Laws, Keith R; Gale, Tim M

2009-10-01

It has been suggested that object recognition in patients with Alzheimer's disease (AD) may be strongly influenced both by image format (e.g. colour vs. line-drawn) and by low-level visual impairments. To examine these notions, we tested basic visual functioning and picture naming in 41 AD patients and 40 healthy elderly controls. Picture naming was examined using 105 images representing a wide range of living and nonliving subcategories (from the Hatfield image test [HIT]: [Adlington, R. A., Laws, K. R., & Gale, T. M. (in press). The Hatfield image test (HIT): A new picture test and norms for experimental and clinical use. Journal of Clinical and Experimental Neuropsychology]), with each item presented in colour, greyscale, or line-drawn formats. Whilst naming for elderly controls improved linearly with the addition of surface detail and colour, AD patients showed no benefit from the addition of either surface information or colour. Additionally, controls showed a significant category by format interaction; however, the same profile did not emerge for AD patients. Finally, AD patients showed widespread and significant impairment on tasks of visual functioning, and low-level visual impairment was predictive of patient naming.

Chromatic VEP in children with congenital colour vision deficiency.

PubMed

Tekavčič Pompe, Manca; Stirn Kranjc, Branka; Brecelj, Jelka

2010-09-01

Visual evoked potentials to chromatic stimulus (cVEP) are believed to selectively test the parvocellular visual pathway which is responsible for processing information about colour. The aim was to evaluate cVEP in children with red-green congenital colour vision deficiency. VEP responses of 15 colour deficient children were compared to 31 children with normal colour vision. An isoluminant red-green stimulus composed of horizontal gratings was presented in an onset-offset manner. The shape of the waveform was studied, as well as the latency and amplitude of positive (P) and negative (N) waves. cVEP response did not change much with increased age in colour deficient children, whereas normative data showed changes from a predominantly positive to a negative response with increased age. A P wave was present in 87% of colour deficient children (and in 100% of children with normal colour vision), whereas the N wave was absent in a great majority of colour deficient children and was present in 80% of children with normal colour vision. Therefore, the amplitude of the whole response (N-P) decreased linearly with age in colour deficient children, whereas in children with normal colour vision it increased linearly. P wave latency shortened with increased age in both groups. cVEP responses differ in children with congenital colour vision deficiency compared to children with normal colour vision. © 2010 The Authors, Ophthalmic and Physiological Optics © 2010 The College of Optometrists.

Violet and blue light-induced green fluorescence emissions from dental caries.

PubMed

Shakibaie, F; Walsh, L J

2016-12-01

The objective of this laboratory study was to compare violet and visible blue LED light-elicited green fluorescence emissions from enamel and dentine in healthy or carious states. Microscopic digital photography was undertaken using violet and blue LED illumination (405 nm and 455 nm wavelengths) of tooth surfaces, which were photographed through a custom-made stack of green compensating filters which removed the excitation light and allowed green fluorescence emissions to pass. Green channel pixel data were analysed. Dry sound enamel and sound root surfaces showed strong green fluorescence when excited by violet or blue lights. Regions of cavitated dental caries gave lower green fluorescence, and this was similar whether the dentine in the lesions was the same colour as normal dentine or was darkly coloured. The presence of saliva on the surface did not significantly change the green fluorescence, while the presence of blood diluted in saliva depressed green fluorescence. Using violet or blue illumination in combination with green compensating filters could potentially aid in the assessment of areas of mineral loss. © 2016 Australian Dental Association.

The influence of the SO2 ageing on the graffiti cleaning effectiveness with chemical procedures on a granite substrate.

PubMed

Gomes, Vera; Dionísio, Amélia; Santiago Pozo-Antonio, J

2018-06-01

Graffiti are one of the most severe threats to Stone Cultural Heritage and are most of the times removed after long periods of environmental exposure. This research intends to evaluate the influence of the ageing of the graffitis on the effectiveness of their cleaning. So, comparative studies on unaged and on artificially SO 2 aged samples were conducted. Four graffiti spray colours were applied on a granite stone and cleaned with two chemical commercial cleaners: a solution of KOH and a solution of n-butyl acetate, xylene and alcohol isobutyl. The spray paints (unaged and aged) and cleaning effectiveness were characterized by stereomicroscopy, colour spectrophotometry, adhesion tests, SEM, μEDXRF, XRD and FTIR. The cleaning effectiveness was also evaluated through surface roughness and static contact angle measurements. The alkyd graffiti paints presented greatest resistance under SO 2 rich environments than the polyethylene paint. The aged polyethylene paint showed chemical modifications that resulted in graffiti losses and neo formed mineralogical phases in the surface of the paint. After ageing, the paints became more difficult to clean, showed higher global colour changes and higher residue percentages. No significant roughness variations were detected after chemical cleaning. After the cleaning procedures aged surfaces became more water repellent comparatively to unaged and reference samples. The best cleaning effectiveness was mainly achieved with the potassium hydroxide solution. Copyright © 2017 Elsevier B.V. All rights reserved.

Thermochromic effect in synthetic opal/polyaniline composite structures

NASA Astrophysics Data System (ADS)

Rahman, F.; Khokhar, A. Z.

2009-02-01

The design and construction of a novel storage/indicator bilayer system is described where ammonia gas stored in a porous material can be used to dope a colour-changing polyaniline film. Both reversible and irreversible colour change effects are possible. A thin synthetic opal film is coupled to a polyaniline film in a parallel plate glass cell with ammonia gas adsorbed on the silica balls that form the opal structure. When heated and cooled, ammonia reversibly exchanges between the opal and polyaniline films causing a very distinct change in the colour of the polyaniline film. This thermochromic effect is also electrically detectable because of the large concomitant change in the resistivity of the polyaniline film that accompanies its colour change.

Correlation between ethylene emission and skin colour changes during papaya (Carica papaya L.) fruit ripening

NASA Astrophysics Data System (ADS)

da Silva, M. G.; Oliveira, J. G.; Vitoria, A. P.; Corrêa, S. F.; Pereira, M. G.; Campostrini, E.; Santos, E. O.; Cavalli, A.; Vargas, H.

2005-06-01

The skin colour changes and ethylene emission rates were monitored during papaya (C. papaya L.) fruit ripening. Two groups of papaya (‘Formosa’ and ‘Solo’) were applied in this study. The total colour difference was used as measured parameter and the corresponding half time of its saturation was used as correlation parameter. A high correlation factor between the saturation half time and corresponding climacteric peak time was found. It was concluded that high ethylene emission rate in ‘Solo’ fruit promotes a quick change of the total colour difference.

Three-channel false colour AFM images for improved interpretation of complex surfaces: a study of filamentous cyanobacteria.

PubMed

Kurk, Toby; Adams, David G; Connell, Simon D; Thomson, Neil H

2010-05-01

Imaging signals derived from the atomic force microscope (AFM) are typically presented as separate adjacent images with greyscale or pseudo-colour palettes. We propose that information-rich false-colour composites are a useful means of presenting three-channel AFM image data. This method can aid the interpretation of complex surfaces and facilitate the perception of information that is convoluted across data channels. We illustrate this approach with images of filamentous cyanobacteria imaged in air and under aqueous buffer, using both deflection-modulation (contact) mode and amplitude-modulation (tapping) mode. Topography-dependent contrast in the error and tertiary signals aids the interpretation of the topography signal by contributing additional data, resulting in a more detailed image, and by showing variations in the probe-surface interaction. Moreover, topography-independent contrast and topography-dependent contrast in the tertiary data image (phase or friction) can be distinguished more easily as a consequence of the three dimensional colour-space.

Lightness and Hue Perception: The Bezold-Brucke Effect and Colour Basic Categories

ERIC Educational Resources Information Center

Lillo, Julio; Aguado, Luis; Moreira, Humberto; Davies, Ian

2004-01-01

Using surface colours as stimuli, the present research was aimed at the two following goals: (1) To determine the chromatic angles related to categorical effects type B-B (Bezold-Brucke). (2) To determine the colourimetric characteristics compatible with each Spanish colour basic category. To get these goals the full set of tiles included in the…

A chameleon-inspired stretchable electronic skin with interactive colour changing controlled by tactile sensing

PubMed Central

Chou, Ho-Hsiu; Nguyen, Amanda; Chortos, Alex; To, John W.F.; Lu, Chien; Mei, Jianguo; Kurosawa, Tadanori; Bae, Won-Gyu; Tok, Jeffrey B.-H.; Bao, Zhenan

2015-01-01

Some animals, such as the chameleon and cephalopod, have the remarkable capability to change their skin colour. This unique characteristic has long inspired scientists to develop materials and devices to mimic such a function. However, it requires the complex integration of stretchability, colour-changing and tactile sensing. Here we show an all-solution processed chameleon-inspired stretchable electronic skin (e-skin), in which the e-skin colour can easily be controlled through varying the applied pressure along with the applied pressure duration. As such, the e-skin's colour change can also be in turn utilized to distinguish the pressure applied. The integration of the stretchable, highly tunable resistive pressure sensor and the fully stretchable organic electrochromic device enables the demonstration of a stretchable electrochromically active e-skin with tactile-sensing control. This system will have wide range applications such as interactive wearable devices, artificial prosthetics and smart robots. PMID:26300307

A chameleon-inspired stretchable electronic skin with interactive colour changing controlled by tactile sensing.

PubMed

Chou, Ho-Hsiu; Nguyen, Amanda; Chortos, Alex; To, John W F; Lu, Chien; Mei, Jianguo; Kurosawa, Tadanori; Bae, Won-Gyu; Tok, Jeffrey B-H; Bao, Zhenan

2015-08-24

Some animals, such as the chameleon and cephalopod, have the remarkable capability to change their skin colour. This unique characteristic has long inspired scientists to develop materials and devices to mimic such a function. However, it requires the complex integration of stretchability, colour-changing and tactile sensing. Here we show an all-solution processed chameleon-inspired stretchable electronic skin (e-skin), in which the e-skin colour can easily be controlled through varying the applied pressure along with the applied pressure duration. As such, the e-skin's colour change can also be in turn utilized to distinguish the pressure applied. The integration of the stretchable, highly tunable resistive pressure sensor and the fully stretchable organic electrochromic device enables the demonstration of a stretchable electrochromically active e-skin with tactile-sensing control. This system will have wide range applications such as interactive wearable devices, artificial prosthetics and smart robots.

Oxygenated-Blood Colour Change Thresholds for Perceived Facial Redness, Health, and Attractiveness

PubMed Central

Re, Daniel E.; Whitehead, Ross D.; Xiao, Dengke; Perrett, David I.

2011-01-01

Blood oxygenation level is associated with cardiovascular fitness, and raising oxygenated blood colouration in human faces increases perceived health. The current study used a two-alternative forced choice (2AFC) psychophysics design to quantify the oxygenated blood colour (redness) change threshold required to affect perception of facial colour, health and attractiveness. Detection thresholds for colour judgments were lower than those for health and attractiveness, which did not differ. The results suggest redness preferences do not reflect a sensory bias, rather preferences may be based on accurate indications of health status. Furthermore, results suggest perceived health and attractiveness may be perceptually equivalent when they are assessed based on facial redness. Appearance-based motivation for lifestyle change can be effective; thus future studies could assess the degree to which cardiovascular fitness increases face redness and could quantify changes in aerobic exercise needed to increase facial attractiveness. PMID:21448270

Oxygenated-blood colour change thresholds for perceived facial redness, health, and attractiveness.

PubMed

Re, Daniel E; Whitehead, Ross D; Xiao, Dengke; Perrett, David I

2011-03-23

Blood oxygenation level is associated with cardiovascular fitness, and raising oxygenated blood colouration in human faces increases perceived health. The current study used a two-alternative forced choice (2AFC) psychophysics design to quantify the oxygenated blood colour (redness) change threshold required to affect perception of facial colour, health and attractiveness. Detection thresholds for colour judgments were lower than those for health and attractiveness, which did not differ. The results suggest redness preferences do not reflect a sensory bias, rather preferences may be based on accurate indications of health status. Furthermore, results suggest perceived health and attractiveness may be perceptually equivalent when they are assessed based on facial redness. Appearance-based motivation for lifestyle change can be effective; thus future studies could assess the degree to which cardiovascular fitness increases face redness and could quantify changes in aerobic exercise needed to increase facial attractiveness.

Continuous tone printing in silicone from CNC milled matrices

NASA Astrophysics Data System (ADS)

Hoskins, S.; McCallion, P.

2014-02-01

Current research at the Centre for Fine Print Research (CFPR) at the University of the West of England, Bristol, is exploring the potential of creating coloured pictorial imagery from a continuous tone relief surface. To create the printing matrices the research team have been using CNC milled images where the height of the relief image is dictated by creating a tone curve and then milling this curve into a series of relief blocks from which the image is cast in a silicone ink. A translucent image is cast from each of the colour matrices and each colour is assembled - one on top of another - resulting is a colour continuous tone print, where colour tone is created by physical depth of colour. This process is a contemporary method of continuous tone colour printing based upon the Nineteenth Century black and white printing process of Woodburytype as developed by Walter Bentley Woodbury in 1865. Woodburytype is the only true continuous tone printing process invented, and although its delicate and subtle surfaces surpassed all other printing methods at the time. The process died out in the late nineteenth century as more expedient and cost effective methods of printing prevailed. New research at CFPR builds upon previous research that combines 19th Century Photomechanical techniques with digital technology to reappraise the potential of these processes.

The colour of pain: can patients use colour to describe osteoarthritis pain?

PubMed

Wylde, Vikki; Wells, Victoria; Dixon, Samantha; Gooberman-Hill, Rachael

2014-03-01

The aim of the present study was to explore patients' views on the acceptability and feasibility of using colour to describe osteoarthritis (OA) pain, and whether colour could be used to communicate pain to healthcare professionals. Six group interviews were conducted with 17 patients with knee OA. Discussion topics included first impressions about using colour to describe pain, whether participants could associate their pain with colour, how colours related to changes to intensity and different pain qualities, and whether they could envisage using colour to describe pain to healthcare professionals. The group interviews indicated that, although the idea of using colour was generally acceptable, it did not suit all participants as a way of describing their pain. The majority of participants chose red to describe high-intensity pain; the reasons given were because red symbolized inflammation, fire, anger and the stop signal in a traffic light system. Colours used to describe the absence of pain were chosen because of their association with positive emotional feelings, such as purity, calmness and happiness. A range of colours was chosen to represent changes in pain intensity. Aching pain was consistently identified as being associated with colours such as grey or black, whereas sharp pain was described using a wider selection of colours. The majority of participants thought that they would be able to use colour to describe their pain to healthcare professionals, although issues around the interpretability and standardization of colour were raised. For some patients, using colour to describe their pain experience may be a useful tool to improve doctor-patient communication. Copyright © 2013 John Wiley & Sons, Ltd.

Trends in Ocean Colour and Chlorophyll Concentration from 1889 to 2000, Worldwide

PubMed Central

Wernand, Marcel R.; van der Woerd, Hendrik J.; Gieskes, Winfried W. C.

2013-01-01

Marine primary productivity is an important agent in the global cycling of carbon dioxide, a major ‘greenhouse gas’, and variations in the concentration of the ocean's phytoplankton biomass can therefore explain trends in the global carbon budget. Since the launch of satellite-mounted sensors globe-wide monitoring of chlorophyll, a phytoplankton biomass proxy, became feasible. Just as satellites, the Forel-Ule (FU) scale record (a hardly explored database of ocean colour) has covered all seas and oceans – but already since 1889. We provide evidence that changes of ocean surface chlorophyll can be reconstructed with confidence from this record. The EcoLight radiative transfer numerical model indicates that the FU index is closely related to chlorophyll concentrations in open ocean regions. The most complete FU record is that of the North Atlantic in terms of coverage over space and in time; this dataset has been used to test the validity of colour changes that can be translated to chlorophyll. The FU and FU-derived chlorophyll data were analysed for monotonously increasing or decreasing trends with the non-parametric Mann-Kendall test, a method to establish the presence of a consistent trend. Our analysis has not revealed a globe-wide trend of increase or decrease in chlorophyll concentration during the past century; ocean regions have apparently responded differentially to changes in meteorological, hydrological and biological conditions at the surface, including potential long-term trends related to global warming. Since 1889, chlorophyll concentrations have decreased in the Indian Ocean and in the Pacific; increased in the Atlantic Ocean, the Mediterranean, the Chinese Sea, and in the seas west and north-west of Japan. This suggests that explanations of chlorophyll changes over long periods should focus on hydrographical and biological characteristics typical of single ocean regions, not on those of ‘the’ ocean. PMID:23776435

Strategies to limit colour changes when fortifying food products with iron.

PubMed

Habeych, Edwin; van Kogelenberg, Violet; Sagalowicz, Laurent; Michel, Martin; Galaffu, Nicola

2016-10-01

Iron, vitamin A, zinc and iodine have been recognized to be the micronutrients with the largest deficiencies worldwide. Among these, iron is highly reactive and may lead to negatively perceived organoleptic changes in products such as dull colour and off-taste. The colour change originated in fortified fruit-containing food products was confirmed to be the result of the complexation of iron and polyphenols. Phenolic compounds with two or more vicinal hydroxy benzyl moieties in their structure, such as catechols and pyrogallols were investigated for their ability to give bathochromic shift phenomena when mixed with iron salts. Furthermore, strategies for limiting colour development were based on: 1) pH adjustment; 2) saturation of polyphenols with unreactive divalent metal ions; 3) suppression of iron reactivity through complexation. Some of these strategies showed a significant improvement in colour stability, with the best results achieved by the latter. The findings in model systems gave a good insight of the mechanisms involved in colour changes, and results were transferable to iron fortified banana puree. Copyright © 2016 Elsevier Ltd. All rights reserved.

Melanin-based colour polymorphism responding to climate change.

PubMed

Roulin, Alexandre

2014-11-01

Climate warming leads to a decrease in biodiversity. Organisms can deal with the new prevailing environmental conditions by one of two main routes, namely evolving new genetic adaptations or through phenotypic plasticity to modify behaviour and physiology. Melanin-based colouration has important functions in animals including a role in camouflage and thermoregulation, protection against UV-radiation and pathogens and, furthermore, genes involved in melanogenesis can pleiotropically regulate behaviour and physiology. In this article, I review the current evidence that differently coloured individuals are differentially sensitive to climate change. Predicting which of dark or pale colour variants (or morphs) will be more penalized by climate change will depend on the adaptive function of melanism in each species as well as how the degree of colouration covaries with behaviour and physiology. For instance, because climate change leads to a rise in temperature and UV-radiation and dark colouration plays a role in UV-protection, dark individuals may be less affected from global warming, if this phenomenon implies more solar radiation particularly in habitats of pale individuals. In contrast, as desertification increases, pale colouration may expand in those regions, whereas dark colourations may expand in regions where humidity is predicted to increase. Dark colouration may be also indirectly selected by climate warming because genes involved in the production of melanin pigments confer resistance to a number of stressful factors including those associated with climate warming. Furthermore, darker melanic individuals are commonly more aggressive than paler conspecifics, and hence they may better cope with competitive interactions due to invading species that expand their range in northern latitudes and at higher altitudes. To conclude, melanin may be a major component involved in adaptation to climate warming, and hence in animal populations melanin-based colouration is likely to change as an evolutionary or plastic response to climate warming. © 2014 John Wiley & Sons Ltd.

Synaesthesia and colour constancy.

PubMed

Erskine, Holly; Mattingley, Jason B; Arnold, Derek H

2013-04-01

Grapheme-colour synaesthesia is an atypical condition characterized by the perception of colours when reading achromatic text. We investigated the level of colour processing responsible for these experiences. To do so, we tapped a central characteristic of colour perception. In different lighting conditions the same wavelength of light can prompt the perception of different colours. This helps humans recognize distinctive coloured objects despite changes in illumination. We wanted to see if synaesthetic colours were generated at a neural locus that was susceptible to colour constancy analyses. We used colour matching and naming tasks to examine interactions between simulated coloured illuminants and synaesthetic colours. Neither synaesthetic colour matching or naming was impacted. This contrasted with non-synaesthetic control participants, who performed the colour-matching task with graphemes physically coloured to mimic synaesthesia. Our data suggest that synaesthetic colour signals are not generated at lower-levels of colour processing, but are introduced at higher levels of analysis and are therefore not impacted by the processes responsible for perceptual constancy. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Chromatic and achromatic monocular deprivation produce separable changes of eye dominance in adults.

PubMed

Zhou, Jiawei; Reynaud, Alexandre; Kim, Yeon Jin; Mullen, Kathy T; Hess, Robert F

2017-11-29

Temporarily depriving one eye of its input, in whole or in part, results in a transient shift in eye dominance in human adults, with the patched eye becoming stronger and the unpatched eye weaker. However, little is known about the role of colour contrast in these behavioural changes. Here, we first show that the changes in eye dominance and contrast sensitivity induced by monocular eye patching affect colour and achromatic contrast sensitivity equally. We next use dichoptic movies, customized and filtered to stimulate the two eyes differentially. We show that a strong imbalance in achromatic contrast between the eyes, with no colour content, also produces similar, unselective shifts in eye dominance for both colour and achromatic contrast sensitivity. Interestingly, if this achromatic imbalance is paired with similar colour contrast in both eyes, the shift in eye dominance is selective, affecting achromatic but not chromatic contrast sensitivity and revealing a dissociation in eye dominance for colour and achromatic image content. On the other hand, a strong imbalance in chromatic contrast between the eyes, with no achromatic content, produces small, unselective changes in eye dominance, but if paired with similar achromatic contrast in both eyes, no changes occur. We conclude that perceptual changes in eye dominance are strongly driven by interocular imbalances in achromatic contrast, with colour contrast having a significant counter balancing effect. In the short term, eyes can have different dominances for achromatic and chromatic contrast, suggesting separate pathways at the site of these neuroplastic changes. © 2017 The Author(s).

A 15-year global biogeochemical reanalysis with ocean colour data assimilation

NASA Astrophysics Data System (ADS)

Ford, David; Barciela, Rosa

2013-04-01

A continuous global time-series of remotely sensed ocean colour observations is available from 1997 to the present day. However coverage is incomplete, and limited to the sea surface. Models are therefore required to provide full spatial coverage, and to investigate the relationships between physical and biological variables and the carbon cycle. Data assimilation can then be used to constrain models to fit the observations, thereby combining the advantages of both sources of information. As part of the European Space Agency's Climate Change Initiative (ESA-CCI), we assimilate chlorophyll concentration derived from ocean colour observations into a coupled physical-biogeochemical model. The data assimilation scheme (Hemmings et al., 2008, J. Mar. Res.; Ford et al., 2012, Ocean Sci.) uses the information from the observations to update all biological and carbon cycle state variables within the model. Global daily reanalyses have been produced, with and without assimilation of merged ocean colour data provided by GlobColour, for the period September 1997 to August 2012. The assimilation has been shown to significantly improve the model's representation of chlorophyll concentration, at the surface and at depth. Furthermore, there is evidence of improvement to the representation of pCO2, nutrients and zooplankton concentration compared to in situ observations. We use the results to quantify recent seasonal and inter-annual variability in variables including chlorophyll concentration, air-sea CO2 flux and alkalinity. In particular, we explore the impact of physical drivers such as the El Niño Southern Oscillation (ENSO) on the model's representation of chlorophyll and the carbon cycle, and the pros and cons of the model reanalyses compared to observation-based climatologies. Furthermore, we perform a comparison between the GlobColour product and an initial version of a new merged product being developed as part of the ESA-CCI. Equivalent year-long hindcasts are performed with assimilation of each data set, and compared to a control run. Differences in the products are discussed, along with their impact on model accuracy compared to in situ observations, and the representation of the carbon cycle in each hindcast.

FC colour images of dwarf planet Ceres reveal a complicated geological history

NASA Astrophysics Data System (ADS)

Nathues, A.; Hoffmann, M.; Platz, T.; Thangjam, G. S.; Cloutis, E. A.; Reddy, V.; Le Corre, L.; Li, J.-Y.; Mengel, K.; Rivkin, A.; Applin, D. M.; Schaefer, M.; Christensen, U.; Sierks, H.; Ripken, J.; Schmidt, B. E.; Hiesinger, H.; Sykes, M. V.; Sizemore, H. G.; Preusker, F.; Russell, C. T.

2016-12-01

The dwarf planet Ceres (equatorial diameter 963km) is the largest object that has remained in the main asteroid belt (Russell and Raymond, 2012), while most large bodies have been destroyed or removed by dynamical processes (Petit et al. 2001; Minton and Malhotra, 2009). Pre-Dawn investigations (McCord and Sotin, 2005; Castillo-Rogez and McCord, 2010; Castillo-Rogez et al., 2011) suggest that Ceres is a thermally evolved, but still volatile-rich body with potential geological activity, that was never completely molten, but possibly differentiated into a rocky core, an ice-rich mantle, and may contain remnant internal liquid water. Thermal alteration should contribute to producing a (dark) carbonaceous chondritic-like surface (McCord and Sotin, 2005; Castillo-Rogez and McCord, 2010; Castillo-Rogez et al., 2011; Nathues et al., 2015) containing ammoniated phyllosilicates (King et al., 1992; De Sanctis et al., 2015 and 2016). Here we show and analyse global contrast-rich colour mosaics, derived from a camera on-board Dawn at Ceres (Russell et al., 2016). Colours are unexpectedly more diverse on global scale than anticipated by Hubble Space Telescope (Li et al., 2006) and ground-based observations (Reddy et al. 2015). Dawn data led to the identification of five major colour units. The youngest units identified by crater counting, termed bright and bluish units, are exclusively found at equatorial and intermediate latitudes. We identified correlations between the distribution of the colour units, crater size, and formation age, inferring a crustal stratigraphy. Surface brightness and spectral properties are not correlated. The youngest surface features are the bright spots at crater Occator ( Ø 92km). Their colour spectra are highly consistent with the presence of carbonates while most of the remaining surface resembles modifications of various types of ordinary carbonaceous chondrites.

Rethinking Colour Constancy

PubMed Central

Logvinenko, Alexander D.; Funt, Brian; Mirzaei, Hamidreza; Tokunaga, Rumi

2015-01-01

Colour constancy needs to be reconsidered in light of the limits imposed by metamer mismatching. Metamer mismatching refers to the fact that two objects reflecting metameric light under one illumination may reflect non-metameric light under a second; so two objects appearing as having the same colour under one illuminant can appear as having different colours under a second. Yet since Helmholtz, object colour has generally been believed to remain relatively constant. The deviations from colour constancy registered in experiments are usually thought to be small enough that they do not contradict the notion of colour constancy. However, it is important to determine how the deviations from colour constancy relate to the limits metamer mismatching imposes on constancy. Hence, we calculated metamer mismatching’s effect for the 20 Munsell papers and 8 pairs of illuminants employed in the colour constancy study by Logvinenko and Tokunaga and found it to be so extensive that the two notions—metamer mismatching and colour constancy—must be mutually exclusive. In particular, the notion of colour constancy leads to some paradoxical phenomena such as the possibility of 20 objects having the same colour under chromatic light dispersing into a hue circle of colours under neutral light. Thus, colour constancy refers to a phenomenon, which because of metamer mismatching, simply cannot exist. Moreover, it obscures the really important visual phenomenon; namely, the alteration of object colours induced by illumination change. We show that colour is not an independent, intrinsic attribute of an object, but rather an attribute of an object/light pair, and then define a concept of material colour in terms of equivalence classes of such object/light pairs. We suggest that studying the shift in material colour under a change in illuminant will be more fruitful than pursuing colour constancy’s false premise that colour is an intrinsic attribute of an object. PMID:26356217

Loss of red opsin genes relaxes sexual isolation between skin-colour variants of medaka.

PubMed

Kamijo, Makiko; Kawamura, Mayuko; Fukamachi, Shoji

2018-05-01

Colour vision is often essential for animals. Fine discrimination of colours enhances the ability of animals to find food, predators, or mating partners. Using two colour variants of medaka (Oryzias latipes), which mate assortatively depending on visual cues (pale grey versus dark orange), we recently established red colour-blind strains by knocking out the red opsin (long-wavelength-sensitive) genes and elucidated that the fish were indeed insensitive to red light. In the present study, we investigated the mate choice of these red-blind fish. The colour variants with normal colour vision strongly preferred to mate with their own strain. The red-blind ones also preferred their own strain; i.e. they still mated assortatively. However, their preference was significantly weaker than that of fish with normal colour vision. In other words, the red-blind fish showed increased sexual interest in the other colour variant. These results indicated that reduced sensitivity to red light also reduced their ability to discriminate colours. This empirical evidence directly demonstrates that a change in cone-opsin repertoire changes mating decision behaviours, which would affect gene flow and speciation processes between conspecific colour variants in nature, as suggested in other studies. Copyright © 2018 Elsevier B.V. All rights reserved.

Sealant retention is better assessed through colour photographs than through the replica and the visual examination methods.

PubMed

Hu, Xuan; Fan, Mingwan; Rong, Wensheng; Lo, Edward C M; Bronkhorst, Ewald; Frencken, Jo E

2014-08-01

The aim of this study was to test the hypothesis that the colour photograph method has a higher level of validity for assessing sealant retention than the visual clinical examination and replica methods. Sealed molars were assessed by two evaluators. The scores for the three methods were compared against consensus scores derived through assessing retention from scanning electron microscopy images (reference standard). The presence/absence (survival) of retained sealants on occlusal surfaces was determined according to the traditional and modified categorizations of retention. Sensitivity, specificity, and Youden-index scores were calculated. Sealant retention assessment scores for visual clinical examinations and for colour photographs were compared with those of the reference standard on 95 surfaces, and sealant retention assessment scores for replicas were compared with those of the reference standard on 33 surfaces. The highest mean Youden-index score for the presence/absence of sealant material was observed for the colour photograph method, followed by that for the replica method; the visual clinical examination method scored lowest. The mean Youden-index score for the survival of retained sealants was highest for the colour photograph method for both the traditional (0.882) and the modified (0.768) categories of sealant retention, whilst the visual clinical examination method had the lowest Youden-index score for these categories (0.745 and 0.063, respectively). The colour photograph method had a higher validity than the replica and the visual examination methods for assessing sealant retention. © 2014 Eur J Oral Sci.

Robust colour constancy in red-green dichromats

PubMed Central

Linhares, João M. M.; Moreira, Humberto; Lillo, Julio; Nascimento, Sérgio M. C.

2017-01-01

Colour discrimination has been widely studied in red-green (R-G) dichromats but the extent to which their colour constancy is affected remains unclear. This work estimated the extent of colour constancy for four normal trichromatic observers and seven R-G dichromats when viewing natural scenes under simulated daylight illuminants. Hyperspectral imaging data from natural scenes were used to generate the stimuli on a calibrated CRT display. In experiment 1, observers viewed a reference scene illuminated by daylight with a correlated colour temperature (CCT) of 6700K; observers then viewed sequentially two versions of the same scene, one illuminated by either a higher or lower CCT (condition 1, pure CCT change with constant luminance) or a higher or lower average luminance (condition 2, pure luminance change with a constant CCT). The observers’ task was to identify the version of the scene that looked different from the reference scene. Thresholds for detecting a pure CCT change or a pure luminance change were estimated, and it was found that those for R-G dichromats were marginally higher than for normal trichromats regarding CCT. In experiment 2, observers viewed sequentially a reference scene and a comparison scene with a CCT change or a luminance change above threshold for each observer. The observers’ task was to identify whether or not the change was an intensity change. No significant differences were found between the responses of normal trichromats and dichromats. These data suggest robust colour constancy mechanisms along daylight locus in R-G dichromacy. PMID:28662218

Robust colour constancy in red-green dichromats.

PubMed

Álvaro, Leticia; Linhares, João M M; Moreira, Humberto; Lillo, Julio; Nascimento, Sérgio M C

2017-01-01

Colour discrimination has been widely studied in red-green (R-G) dichromats but the extent to which their colour constancy is affected remains unclear. This work estimated the extent of colour constancy for four normal trichromatic observers and seven R-G dichromats when viewing natural scenes under simulated daylight illuminants. Hyperspectral imaging data from natural scenes were used to generate the stimuli on a calibrated CRT display. In experiment 1, observers viewed a reference scene illuminated by daylight with a correlated colour temperature (CCT) of 6700K; observers then viewed sequentially two versions of the same scene, one illuminated by either a higher or lower CCT (condition 1, pure CCT change with constant luminance) or a higher or lower average luminance (condition 2, pure luminance change with a constant CCT). The observers' task was to identify the version of the scene that looked different from the reference scene. Thresholds for detecting a pure CCT change or a pure luminance change were estimated, and it was found that those for R-G dichromats were marginally higher than for normal trichromats regarding CCT. In experiment 2, observers viewed sequentially a reference scene and a comparison scene with a CCT change or a luminance change above threshold for each observer. The observers' task was to identify whether or not the change was an intensity change. No significant differences were found between the responses of normal trichromats and dichromats. These data suggest robust colour constancy mechanisms along daylight locus in R-G dichromacy.

Effect of location in the canopy on the colour development of three apple cultivars during growth.

PubMed

Unuk, Tatjana; Tijskens, L M M Pol; Germšek, Blaž; Zadravec, Peter; Vogrin, Andrej; Hribar, Janez; Simčič, Marjan; Tojnko, Stanislav

2012-09-01

Homogeneity in appearance is one of the quality aspects asked for in the supply chain. Decreasing the biological variation in batches of harvested apples (cultivars Braeburn, Fuji and Gala) becomes increasingly important. Skin colour is one of the aspects that determine both optimal harvest and stage of development. Skin colour is affected by location in the canopy. The rules of development of biological variation are now established and will be used on skin colour data. The Minolta colour aspects a*, b* and L* measured before commercial harvest change in a sigmoidal fashion and can be analysed including the biological variation, with a logistic model in indexed nonlinear regression, obtaining explained parts of above 90%. The mechanism of colour change is not affected by state of development or location in the canopy. The location in the canopy affects the intensity of both red and green colouring compounds. The variation in colouration is not affected by the location in the canopy. The red-coloured apple cultivar (Gala) depends more on the location in the canopy than the less-coloured cultivars (Fuji and Braeburn). The colour development in Fuji apples is considerably slower, with a much larger variation in stage of development. The location in the canopy affects all aspects of biological variation (biological shift factor and asymptotic starting level of colouration) for all three colour aspects L*, a* and b*, but only the mean value, not the standard deviation. The biological shift factors per colour aspects are linearly related. Once induced, variation remains constant during development. Copyright © 2012 Society of Chemical Industry.

The effect of polyploidy and hybridization on the evolution of floral colour in Nicotiana (Solanaceae)

PubMed Central

McCarthy, Elizabeth W.; Arnold, Sarah E. J.; Chittka, Lars; Le Comber, Steven C.; Verity, Robert; Dodsworth, Steven; Knapp, Sandra; Kelly, Laura J.; Chase, Mark W.; Baldwin, Ian T.; Kovařík, Aleš; Mhiri, Corinne; Taylor, Lin; Leitch, Andrew R.

2015-01-01

Background and Aims Speciation in angiosperms can be accompanied by changes in floral colour that may influence pollinator preference and reproductive isolation. This study investigates whether changes in floral colour can accompany polyploid and homoploid hybridization, important processes in angiosperm evolution. Methods Spectral reflectance of corolla tissue was examined for 60 Nicotiana (Solanaceae) accessions (41 taxa) based on spectral shape (corresponding to pigmentation) as well as bee and hummingbird colour perception in order to assess patterns of floral colour evolution. Polyploid and homoploid hybrid spectra were compared with those of their progenitors to evaluate whether hybridization has resulted in floral colour shifts. Key Results Floral colour categories in Nicotiana seem to have arisen multiple times independently during the evolution of the genus. Most younger polyploids displayed an unexpected floral colour, considering those of their progenitors, in the colour perception of at least one pollinator type, whereas older polyploids tended to resemble one or both of their progenitors. Conclusions Floral colour evolution in Nicotiana is weakly constrained by phylogeny, and colour shifts do occur in association with both polyploid and homoploid hybrid divergence. Transgressive floral colour in N. tabacum has arisen by inheritance of anthocyanin pigmentation from its paternal progenitor while having a plastid phenotype like its maternal progenitor. Potentially, floral colour evolution has been driven by, or resulted in, pollinator shifts. However, those polyploids that are not sympatric (on a regional scale) with their progenitor lineages are typically not divergent in floral colour from them, perhaps because of a lack of competition for pollinators. PMID:25979919

Colour change in cyanosis and the confusions of congenital colour vision deficient observers.

PubMed

McNamara, Renae; Taylor, Clair M; McKenzie, David K; Coroneo, Minas T; Dain, Stephen J

2010-09-01

Visual recognition of cyanosis is an important clinical activity. While pulse oximetry is almost universal in the hospital environment, there are circumstances where it is not available or may be unreliable. Cyanosis recognition is affected by lighting colour. In addition, there is, mainly anecdotal, evidence that people with greater colour vision deficiencies (CVDs) have particular difficulty and there is no effective lighting strategy to assist in the observation. The change of blood colour with oxygenation has been shown to lie close to the direction of colour confusions made by congenital red-green dichromats. The important sites of observation are lips, nail beds and palm creases. 10 subjects who were known to be chronically hypoxaemic were recruited from the chronic respiratory program. Their blood oxygen saturation (SpO(2)) varied from 84% to 96% pre-exercise, and 61-84% post-exercise. Ten normal subjects were recruited whose SpO(2) was 99% or 100%. The spectral radiances of lips, nail beds and palm creases were measured using a telespectroradiometer and compared with the spectral radiances of a white tile of known spectral reflectances measured in the same location. This is a non-contact method of measurement, avoiding the blanching caused by pressure of contact methods. The spectral reflectances were calculated, and the chromaticities calculated for a Planckian radiator T = 4000K. Measurements on lips yielded the most consistent results. The colour changes pre- and post-exercise and compared with normal colour lie generally along a deutan confusion line. These results show the direction of the colour change and confirm the, previously anecdotal, difficulties in detecting cyanosis by observers with CVDs. © 2010 The Authors, Ophthalmic and Physiological Optics © 2010 The College of Optometrists.

The importance of chill rate when characterising colour change of lamb meat during retail display.

PubMed

Jacob, R H; Thomson, K L

2012-02-01

An experiment was conducted to compare the effect of two chilling rates (Con and Fast) on colour change of lamb meat during simulated retail display. Measurements were made on 3 muscles; LD (m. longisimuss dorsi), SM (m semimembranosus) and ST (m. semitendinous). Meat samples from 32 Merino crossbred lambs were vacuum packed and stored for 5 days at 2 °C, then cut and overwrapped in polyvinyl chloride film on black polystyrene trays, stored in a display cabinet at 4 °C with lights on and measured twice daily for 4 days, using a Hunterlab minilab 45/20L D65, aperture 10°. Sarcomere length was shorter, shear force higher and colour change greater in meat from the Fast treatment compared to the Con treatment. Colour differences between treatments were likely due to oxygenation (bloom) as well as oxidation effects. Chill rate is important when characterising colour change during display and should be considered in measurement protocols. Copyright © 2011 Elsevier Ltd. All rights reserved.

Does Ethylene Treatment Mimic the Effects of Pollination on Floral Lifespan and Attractiveness?

PubMed Central

VAN DOORN, WOUTER G.

2002-01-01

In some species pollination may result in rapid changes in perianth colour and form (petal senescence and abscission, flower closure), rendering the flowers less attractive to pollinators. It has been suggested that this effect is mediated by ethylene. Flowers from about 200 species and 50 families were exposed to ethylene (3 ppm for 24 h at 20 °C). The effects on petal senescence and abscission have been described previously. Flower closure and perianth colour changes were generally ethylene‐sensitive, but responses showed no consistency within families. Several flowers known to respond to pollination by rapid cessation of attractiveness were also exposed to ethylene: this produced the same effect as pollination, both on flower colour and form. Species that respond to pollination by changing flower form or colour were found exclusively in families in which the species are generally ethylene‐sensitive (with regard to changes in perianth form and colour). However, several families are generally ethylene‐sensitive but contain no species reported to respond to pollination. PMID:12096797

Melanin-based coloration and host–parasite interactions under global change

PubMed Central

Côte, J.; Boniface, A.; Blanchet, S.; Hendry, A. P.; Gasparini, J.

2018-01-01

The role of parasites in shaping melanin-based colour polymorphism, and the consequences of colour polymorphism for disease resistance, remain debated. Here we review recent evidence of the links between melanin-based coloration and the behavioural and immunological defences of vertebrates against their parasites. First we propose that (1) differences between colour morphs can result in variable exposure to parasites, either directly (certain colours might be more or less attractive to parasites) or indirectly (variations in behaviour and encounter probability). Once infected, we propose that (2) immune variation between differently coloured individuals might result in different abilities to cope with parasite infection. We then discuss (3) how these different abilities could translate into variable sexual and natural selection in environments varying in parasite pressure. Finally, we address (4) the potential role of parasites in the maintenance of melanin-based colour polymorphism, especially in the context of global change and multiple stressors in human-altered environments. Because global change will probably affect both coloration and the spread of parasitic diseases in the decades to come, future studies should take into account melanin-based coloration to better predict the evolutionary responses of animals to changing disease risk in human-altered environments. PMID:29848644

Young Children's Drawings of Plant Life: A Study Concerning the Use of Colours and Its Relationship with Age

ERIC Educational Resources Information Center

Villarroel, José Domingo

2016-01-01

This study examines the drawings that elementary grade school children make on the subject of plant life. More specifically, the pictorial elements drawn by children are analysed together with their colour choices and the size of coloured surfaces. Furthermore, the results are put into perspective with the age of the children in the sample. The…

Structural colours of nickel bioreplicas of butterfly wings

NASA Astrophysics Data System (ADS)

Tolenis, Tomas; Swiontek, Stephen E.; Lakhtakia, Akhlesh

2017-04-01

The two-angle conformally evaporated-film-by-rotation technique (TA-CEFR) was devised to coat the wings of the monarch butterfly with nickel in order to form a 500-nm thick bioreplica thereof. The bioreplica exhibits structural colours that are completely obscured in actual wings by pigmental colours. Thus, the TA-CEFR technique provides a way to replicate, study and exploit hidden morphologies of biological surfaces.

Qualitative assessment of bone density at the distal articulating surface of the third metacarpal in Thoroughbred racehorses with and without condylar fracture.

PubMed

Loughridge, A B; Hess, A M; Parkin, T D; Kawcak, C E

2017-03-01

Changes in subchondral bone density, induced by the repetitive cyclical loading of exercise, may potentiate fatigue damage and the risk of fracture. To use computed tomography (CT) to characterise bone density patterns at the articular surface of the third metacarpal bone in racehorses with and without lateral condylar fractures. Case control METHODS: Computed tomographic images of the distal articulating surface of the third metacarpal bone were obtained from Thoroughbred racehorses subjected to euthanasia in the UK. Third metacarpal bones were divided into 3 groups based on lateral condyle status; fractured (FX, n = 42), nonfractured contralateral condyle (NFX, n = 42) and control condyles from horses subjected to euthanasia for reasons unrelated to the third metacarpal bone (control, n = 94). Colour CT images were generated whereby each colour represented a range of pixel values and thus a relative range of bone density. A density value was calculated qualitatively by estimating the percentage of each colour within a specific region. Subchondral bone density was assessed in 6 regions from dorsal to palmar and 1 mm medial and lateral to the centre of the lateral parasagittal groove in NFX and control condyles and 1 mm medial and lateral to the fracture in FX condyles. Bone density was significantly higher in the FX and NFX condyles compared with control condyles for all 6 regions. A significantly higher bone density was observed in FX condyles relative to NFX condyles in the lateral middle and lateral palmar regions. Fractured condyles had increased heterogeneity in density among the 6 regions of interest compared with control and NFX condyles. Adjacent to the fracture, a focal increase in bone density and increased heterogeneity of density were characteristic of limbs with lateral condylar fractures compared with control and NFX condyles. These differences may represent pathological changes in bone density that increase the risk for lateral condylar fractures in racehorses. © 2015 EVJ Ltd.

Robust colour calibration of an imaging system using a colour space transform and advanced regression modelling.

PubMed

Jackman, Patrick; Sun, Da-Wen; Elmasry, Gamal

2012-08-01

A new algorithm for the conversion of device dependent RGB colour data into device independent L*a*b* colour data without introducing noticeable error has been developed. By combining a linear colour space transform and advanced multiple regression methodologies it was possible to predict L*a*b* colour data with less than 2.2 colour units of error (CIE 1976). By transforming the red, green and blue colour components into new variables that better reflect the structure of the L*a*b* colour space, a low colour calibration error was immediately achieved (ΔE(CAL) = 14.1). Application of a range of regression models on the data further reduced the colour calibration error substantially (multilinear regression ΔE(CAL) = 5.4; response surface ΔE(CAL) = 2.9; PLSR ΔE(CAL) = 2.6; LASSO regression ΔE(CAL) = 2.1). Only the PLSR models deteriorated substantially under cross validation. The algorithm is adaptable and can be easily recalibrated to any working computer vision system. The algorithm was tested on a typical working laboratory computer vision system and delivered only a very marginal loss of colour information ΔE(CAL) = 2.35. Colour features derived on this system were able to safely discriminate between three classes of ham with 100% correct classification whereas colour features measured on a conventional colourimeter were not. Copyright © 2012 Elsevier Ltd. All rights reserved.

Color appearance and color rendering of HDR scenes: an experiment

NASA Astrophysics Data System (ADS)

Parraman, Carinna; Rizzi, Alessandro; McCann, John J.

2009-01-01

In order to gain a deeper understanding of the appearance of coloured objects in a three-dimensional scene, the research introduces a multidisciplinary experimental approach. The experiment employed two identical 3-D Mondrians, which were viewed and compared side by side. Each scene was subjected to different lighting conditions. First, we used an illumination cube to diffuse the light and illuminate all the objects from each direction. This produced a low-dynamicrange (LDR) image of the 3-D Mondrian scene. Second, in order to make a high-dynamic range (HDR) image of the same objects, we used a directional 150W spotlight and an array of WLEDs assembled in a flashlight. The scenes were significant as each contained exactly the same three-dimensional painted colour blocks that were arranged in the same position in the still life. The blocks comprised 6 hue colours and 5 tones from white to black. Participants from the CREATE project were asked to consider the change in the appearance of a selection of colours according to lightness, hue, and chroma, and to rate how the change in illumination affected appearance. We measured the light coming to the eye from still-life surfaces with a colorimeter (Yxy). We captured the scene radiance using multiple exposures with a number of different cameras. We have begun a programme of digital image processing of these scene capture methods. This multi-disciplinary programme continues until 2010, so this paper is an interim report on the initial phases and a description of the ongoing project.

Evaluating the masticatory function after mandibulectomy with colour-changing chewing gum.

PubMed

Shibuya, Y; Ishida, S; Hasegawa, T; Kobayashi, M; Nibu, K; Komori, T

2013-07-01

The aim of this study was to clarify the usefulness of colour-changing gum in evaluating masticatory performance after mandibulectomy. Thirty-nine patients who underwent mandibulectomy between 1982 and 2010 at Kobe University Hospital were recruited in this study. There were 21 male and 18 female subjects with a mean age of 64·7 years (range: 12-89 years) at the time of surgery. The participants included six patients who underwent marginal mandibulectomy, 21 patients who underwent segmental mandibulectomy and 12 patients who underwent hemimandibulectomy. The masticatory function was evaluated using colour-changing chewing gum, gummy jelly and a modified Sato's questionnaire. In all cases, the data were obtained more than 3 months after completing the patient's final prosthesis. The colour-changing gum scores correlated with both the gummy jelly scores (r = 0·634, P < 0·001) and the total scores of the modified Sato's questionnaire (r = 0·537, P < 0·001). In conclusion, colour-changing gum is a useful item for evaluating masticatory performance after mandibulectomy. © 2013 John Wiley & Sons Ltd.

Colour and oxidative stability of mince produced from fresh and frozen/thawed fallow deer (Dama dama) meat.

PubMed

Chakanya, Chido; Arnaud, Elodie; Muchenje, Voster; Hoffman, Louwrens C

2017-04-01

Colour and oxidative stability of minced meat from fresh and frozen/thawed fallow deer was investigated. For the seven fallow deer harvested, half of the meat was minced fresh and half was frozen (-20°C) for 2months under vacuum prior to grinding. Surface colour attributes, myoglobin content and surface redox forms, pH and lipid oxidation of the mince were measured during eight days of display storage. Proximate composition was determined in mince on day 0, fatty acid composition on day 0 and 8. Freezing had no effect on the proximate composition or fatty acid composition of the mince. Frozen meat mince had lower (P≤0.05) total myoglobin content but higher (P≤0.05) decrease in redness (a*) during display storage, higher (P≤0.05) accumulation of metmyoglobin at the surface from day 2 and higher (P≤0.05) TBARS values. Results showed shorter colour and oxidative stability for frozen meat mince as compared to mince from fresh meat. Display storage however did not affect fatty acid composition. Copyright © 2016 Elsevier Ltd. All rights reserved.

An age-colour relationship for main-belt S-complex asteroids.

PubMed

Jedicke, Robert; Nesvorný, David; Whiteley, Robert; Ivezić Z, Zeljko; Jurić, Mario

2004-05-20

Asteroid collisions in the main belt eject fragments that may eventually land on Earth as meteorites. It has therefore been a long-standing puzzle in planetary science that laboratory spectra of the most populous class of meteorite (ordinary chondrites, OC) do not match the remotely observed surface spectra of their presumed (S-complex) asteroidal parent bodies. One of the proposed solutions to this perplexing observation is that 'space weathering' modifies the exposed planetary surfaces over time through a variety of processes (such as solar and cosmic ray bombardment, micro-meteorite bombardment, and so on). Space weathering has been observed on lunar samples, in Earth-based laboratory experiments, and there is good evidence from spacecraft data that the process is active on asteroid surfaces. Here, we present a measurement of the rate of space weathering on S-complex main-belt asteroids using a relationship between the ages of asteroid families and their colours. Extrapolating this age-colour relationship to very young ages yields a good match to the colour of freshly cut OC meteorite samples, lending strong support to a genetic relationship between them and the S-complex asteroids.

Snake velvet black: Hierarchical micro- and nanostructure enhances dark colouration in Bitis rhinoceros

NASA Astrophysics Data System (ADS)

Spinner, Marlene; Kovalev, Alexander; Gorb, Stanislav N.; Westhoff, Guido

2013-05-01

The West African Gaboon viper (Bitis rhinoceros) is a master of camouflage due to its colouration pattern. Its skin is geometrically patterned and features black spots that purport an exceptional spatial depth due to their velvety surface texture. Our study shades light on micromorphology, optical characteristics and principles behind such a velvet black appearance. We revealed a unique hierarchical pattern of leaf-like microstructures striated with nanoridges on the snake scales that coincides with the distribution of black colouration. Velvet black sites demonstrate four times lower reflectance and higher absorbance than other scales in the UV - near IR spectral range. The combination of surface structures impeding reflectance and absorbing dark pigments, deposited in the skin material, provides reflecting less than 11% of the light reflected by a polytetrafluoroethylene diffuse reflectance standard in any direction. A view-angle independent black structural colour in snakes is reported here for the first time.

Snake velvet black: hierarchical micro- and nanostructure enhances dark colouration in Bitis rhinoceros.

PubMed

Spinner, Marlene; Kovalev, Alexander; Gorb, Stanislav N; Westhoff, Guido

2013-01-01

The West African Gaboon viper (Bitis rhinoceros) is a master of camouflage due to its colouration pattern. Its skin is geometrically patterned and features black spots that purport an exceptional spatial depth due to their velvety surface texture. Our study shades light on micromorphology, optical characteristics and principles behind such a velvet black appearance. We revealed a unique hierarchical pattern of leaf-like microstructures striated with nanoridges on the snake scales that coincides with the distribution of black colouration. Velvet black sites demonstrate four times lower reflectance and higher absorbance than other scales in the UV-near IR spectral range. The combination of surface structures impeding reflectance and absorbing dark pigments, deposited in the skin material, provides reflecting less than 11% of the light reflected by a polytetrafluoroethylene diffuse reflectance standard in any direction. A view-angle independent black structural colour in snakes is reported here for the first time.

The susceptibility of weathered versus unweathered schist to biological colonization in the Côa Valley Archaeological Park (north-east Portugal).

PubMed

Marques, Joana; Vázquez-Nion, Daniel; Paz-Bermúdez, Graciela; Prieto, Beatriz

2015-05-01

This study addresses the primary and secondary bioreceptivity of schist used as a support for prehistoric rock art in the Côa Valley Archaeological Park (north-east Portugal) and provides some parameters that can be related to the risk of biologically induced schist weathering. Samples of freshly quarried and naturally weathered schist were characterized in terms of their intrinsic properties and maintained in controlled environmental conditions after inoculation with biofilm-forming cyanobacteria. The physical properties of the studied schist, as well as its abrasion pH, all varied according to the weathering degree of the samples and so did its susceptibility to colonization by biofilm-forming cyanobacteria. Complete separation between weathered and unweathered schist samples in terms of laboratory-induced photosynthetic biomass was obtained by measuring total colour change in the CIE (International Commission on Illumination) L*a*b* colour space. Weathered schist was more bioreceptive than unweathered schist, associated with increased open porosity, water saturation, capillary water and capillarity coefficient and decreased abrasion pH. In the future, it might be possible to determine the susceptibility of schist surfaces to biological colonization through evaluation of colour differences associated with the different weathering degrees presented by those surfaces prior to colonization. © 2014 Society for Applied Microbiology and John Wiley & Sons Ltd.

Decreased hydrophobicity of iridescent feathers: a potential cost of shiny plumage.

PubMed

Eliason, Chad M; Shawkey, Matthew D

2011-07-01

Honest advertisement models posit that sexually selected traits are costly to produce, maintain or otherwise bear. Brightly coloured feathers are thought to be classic examples of these models, but evidence for a cost in feathers not coloured by carotenoid pigments is scarce. Unlike pigment-based colours, iridescent feather colours are produced by light scattering in modified feather barbules that are characteristically flattened and twisted towards the feather surface. These modifications increase light reflectance, but also expose more surface area for water adhesion, suggesting a potential trade-off between colour and hydrophobicity. Using light microscopy, spectrometry, contact angle goniometry and self-cleaning experiments, we show that iridescent feathers of mallards, Anas platyrhynchos, are less hydrophobic than adjacent non-iridescent feathers, and that this is primarily caused by differences in barbule microstructure. Furthermore, as a result of this decreased hydrophobicity, iridescent feathers are less efficient at self-cleaning than non-iridescent feathers. Together, these results suggest a previously unforeseen cost of iridescent plumage traits that may help to explain the evolution and distribution of iridescence in birds.

Oculomotor capture by colour singletons depends on intertrial priming.

PubMed

Becker, Stefanie I

2010-10-12

In visual search, an irrelevant colour singleton captures attention when the colour of the distractor changes across trials (e.g., from red to green), but not when the colour remains constant (Becker, 2007). The present study shows that intertrial changes of the distractor colour also modulate oculomotor capture: an irrelevant colour singleton distractor was only selected more frequently than the inconspicuous nontargets (1) when its features had switched (compared to the previous trial), or (2) when the distractor had been presented at the same position as the target on the previous trial. These results throw doubt on the notion that colour distractors capture attention and the eyes because of their high feature contrast, which is available at an earlier point in time than information about specific feature values. Instead, attention and eye movements are apparently controlled by a system that operates on feature-specific information, and gauges the informativity of nominally irrelevant features. Copyright © 2010 Elsevier Ltd. All rights reserved.

Colour, phenolic content and antioxidant capacity of some fruits dehydrated by a combination of different methods.

PubMed

Chong, Chien Hwa; Law, Chung Lim; Figiel, Adam; Wojdyło, Aneta; Oziembłowski, Maciej

2013-12-15

The objective of this study was to improve product quality of dehydrated fruits (apple, pear, papaya, mango) using combined drying techniques. This involved investigation of bioactivity, colour, and sensory assessment on colour of the dried products as well as the retention of the bio-active ingredients. The attributes of quality were compared in regard to the quality of dehydrated samples obtained from continuous heat pump (HP) drying technique. It was found that for apple, pear and mango the total colour change (ΔE) of samples dried using continuous heat pump (HP) or heat pump vacuum-microwave (HP/VM) methods was lower than of samples dried by other combined methods. However, for papaya, the lowest colour change exhibited by samples dried using hot air-cold air (HHC) method and the highest colour change was found for heat pump (HP) dehydrated samples. Sensory evaluation revealed that dehydrated pear with higher total colour change (ΔE) is more desirable because of its golden yellow appearance. In most cases the highest phenol content was found from fruits dried by HP/VM method. Judging from the quality findings on two important areas namely colour and bioactivity, it was found that combined drying method consisted of HP pre-drying followed by VM finish drying gave the best results for most dehydrated fruits studied in this work as the fruits contain first group of polyphenol compounds, which preferably requires low temperature followed by rapid drying strategy. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

UV stabilization of wood by nano metal oxides dispersed in propylene glycol.

PubMed

Nair, Sreeja; Nagarajappa, Giridhar B; Pandey, Krishna K

2018-06-01

Nanoparticles of some of the metal oxides are known to have high UV protective efficiency. The UV filtering efficiency of nanoparticles invariably depends on their size and stability in the dispersion. In the present work, a stable dispersion of nanoparticles of three metal oxides, zinc oxide (ZnO), cerium oxide (CeO 2 ) and titanium dioxide (TiO 2 ), was prepared in propylene glycol (PG) using ultrasonication. The method is easy and useful as no additional surfactant or dispersant is needed. The particle size and its distribution was confirmed by Scanning Electron Microscopy and Dynamic Light Scattering. The stability of dispersion was assessed by UV-visible absorption spectroscopy. The UV stability of wood surfaces of Wrightia tinctoria coated with nanodispersions of ZnO, CeO 2 and TiO 2 was evaluated under laboratory conditions in an accelerated weathering tester. Changes in the colour and FTIR spectra of exposed specimens were measured periodically. Rapid colour darkening (yellowing) was observed in uncoated and PG coated specimens. In contrast, nanodispersion coated specimens prevented photo-yellowing considerably with significant reduction in colour changes examined by CIE L*, a*, b* and ΔE*. Increase in concentration of nanoparticles in the dispersion imparted higher resistance to UV induced degradation. However, increased concentration of nanoparticles reduced the transparency of the coating. FTIR analysis indicated rapid degradation of lignin in uncoated and PG coated specimens due to UV exposure. Coating of wood surfaces with nanodispersions restricted lignin degradation. The study also demonstrates the potential of propylene glycol as a dispersant for developing stable and efficient UV protective nanodispersions for wood coating. Copyright © 2018 Elsevier B.V. All rights reserved.

The effect of polyploidy and hybridization on the evolution of floral colour in Nicotiana (Solanaceae).

PubMed

McCarthy, Elizabeth W; Arnold, Sarah E J; Chittka, Lars; Le Comber, Steven C; Verity, Robert; Dodsworth, Steven; Knapp, Sandra; Kelly, Laura J; Chase, Mark W; Baldwin, Ian T; Kovařík, Aleš; Mhiri, Corinne; Taylor, Lin; Leitch, Andrew R

2015-06-01

Speciation in angiosperms can be accompanied by changes in floral colour that may influence pollinator preference and reproductive isolation. This study investigates whether changes in floral colour can accompany polyploid and homoploid hybridization, important processes in angiosperm evolution. Spectral reflectance of corolla tissue was examined for 60 Nicotiana (Solanaceae) accessions (41 taxa) based on spectral shape (corresponding to pigmentation) as well as bee and hummingbird colour perception in order to assess patterns of floral colour evolution. Polyploid and homoploid hybrid spectra were compared with those of their progenitors to evaluate whether hybridization has resulted in floral colour shifts. Floral colour categories in Nicotiana seem to have arisen multiple times independently during the evolution of the genus. Most younger polyploids displayed an unexpected floral colour, considering those of their progenitors, in the colour perception of at least one pollinator type, whereas older polyploids tended to resemble one or both of their progenitors. Floral colour evolution in Nicotiana is weakly constrained by phylogeny, and colour shifts do occur in association with both polyploid and homoploid hybrid divergence. Transgressive floral colour in N. tabacum has arisen by inheritance of anthocyanin pigmentation from its paternal progenitor while having a plastid phenotype like its maternal progenitor. Potentially, floral colour evolution has been driven by, or resulted in, pollinator shifts. However, those polyploids that are not sympatric (on a regional scale) with their progenitor lineages are typically not divergent in floral colour from them, perhaps because of a lack of competition for pollinators. © The Author 2015. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The evolution of colour pattern complexity: selection for conspicuousness favours contrasting within-body colour combinations in lizards.

PubMed

Pérez I de Lanuza, G; Font, E

2016-05-01

Many animals display complex colour patterns that comprise several adjacent, often contrasting colour patches. Combining patches of complementary colours increases the overall conspicuousness of the complex pattern, enhancing signal detection. Therefore, selection for conspicuousness may act not only on the design of single colour patches, but also on their combination. Contrasting long- and short-wavelength colour patches are located on the ventral and lateral surfaces of many lacertid lizards. As the combination of long- and short-wavelength-based colours generates local chromatic contrast, we hypothesized that selection may favour the co-occurrence of lateral and ventral contrasting patches, resulting in complex colour patterns that maximize the overall conspicuousness of the signal. To test this hypothesis, we performed a comparative phylogenetic study using a categorical colour classification based on spectral data and descriptive information on lacertid coloration collected from the literature. Our results demonstrate that conspicuous ventral (long-wavelength-based) and lateral (short-wavelength-based) colour patches co-occur throughout the lacertid phylogeny more often than expected by chance, especially in the subfamily Lacertini. These results suggest that selection promotes the evolution of the complex pattern rather than the acquisition of a single conspicuous colour patch, possibly due to the increased conspicuousness caused by the combination of colours with contrasting spectral properties. © 2016 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2016 European Society For Evolutionary Biology.

The role of luminance and chromatic cues in emmetropisation.

PubMed

Rucker, Frances J

2013-05-01

At birth most, but not all eyes, are hyperopic. Over the course of the first few years of life the refraction gradually becomes close to zero through a process called emmetropisation. This process is not thought to require accommodation, though a lag of accommodation has been implicated in myopia development, suggesting that the accuracy of accommodation is an important factor. This review will cover research on accommodation and emmetropisation that relates to the ability of the eye to use colour and luminance cues to guide the responses. There are three ways in which changes in luminance and colour contrast could provide cues: (1) The eye could maximize luminance contrast. Monochromatic light experiments have shown that the human eye can accommodate and animal eyes can emmetropise using changes in luminance contrast alone. However, by reducing the effectiveness of luminance cues in monochromatic and white light by introducing astigmatism, or by reducing light intensity, investigators have revealed that the eye also uses colour cues in emmetropisation. (2) The eye could compare relative cone contrast to derive the sign of defocus information from colour cues. Experiments involving simulations of the retinal image with defocus have shown that relative cone contrast can provide colour cues for defocus in accommodation and emmetropisation. In the myopic simulation the contrast of the red component of a sinusoidal grating was higher than that of the green and blue component and this caused relaxation of accommodation and reduced eye growth. In the hyperopic simulation the contrast of the blue component was higher than that of the green and red components and this caused increased accommodation and increased eye growth. (3) The eye could compare the change in luminance and colour contrast as the eye changes focus. An experiment has shown that changes in colour or luminance contrast can provide cues for defocus in emmetropisation. When the eye is exposed to colour flicker the eye grows almost twice as much, and becomes more myopic, compared to when the eye is exposed to luminance flicker. Neural responses of the luminance and colour mechanisms direct accommodation and emmetropisation mechanisms to different focal planes. Therefore, it is likely that the set point of refraction and accommodation is dependent on the sensitivity of the eye to changes in spatial and temporal, colour and luminance contrast. Ophthalmic & Physiological Optics © 2013 The College of Optometrists.

New UBVRI colour distributions in E-type galaxies . I. The data

NASA Astrophysics Data System (ADS)

Idiart, T. P.; Michard, R.; de Freitas Pacheco, J. A.

2002-01-01

New colour distributions have been derived from wide field UBVRI frames for 36 northern bright elliptical galaxies and a few lenticulars. The classical linear representations of colours against log r were derived, with some improvements in the accuracy of the zero point colours and of the gradients. The radial range of significant measurements was enlarged both towards the galaxy center and towards the outskirts of each object. Thus, the ``central colours'', integrated within a radius of 3\\arcsec, and the ``outermost colours'' averaged near the muV =24 surface brightness could also be obtained. Some typical deviations of colour profiles from linearity are described. Colour-colour relations of interest are presented. Very tight correlations are found between the U-V colour and the Mg2 line-index, measured either at the Galaxian center or at the effective radius. Based in part on observations collected at the Observatoire de Haute-Provence. Tables 9-11 plus detailed tables for each object are available in electronic form at the CDS via anonymous ftp to cdsarc.u-strasbg.fr (130.79.128.5) or via http://cdsweb.u-strasbg.fr/cgi-bin/qcat?J/A+A/383/30

Representation of Colour Concepts in Bilingual Cognition: The Case of Japanese Blues

ERIC Educational Resources Information Center

Athanasopoulos, Panos; Damjanovic, Ljubica; Krajciova, Andrea; Sasaki, Miho

2011-01-01

Previous studies demonstrate that lexical coding of colour influences categorical perception of colour, such that participants are more likely to rate two colours to be more similar if they belong to the same linguistic category (Roberson et al., 2000, 2005). Recent work shows changes in Greek-English bilinguals' perception of within and…

The transcriptional landscape of seasonal coat colour moult in the snowshoe hare.

PubMed

Ferreira, Mafalda S; Alves, Paulo C; Callahan, Colin M; Marques, João P; Mills, L Scott; Good, Jeffrey M; Melo-Ferreira, José

2017-08-01

Seasonal coat colour change is an important adaptation to seasonally changing environments but the evolution of this and other circannual traits remains poorly understood. In this study, we use gene expression to understand seasonal coat colour moulting in wild snowshoe hares (Lepus americanus). We used hair colour to follow the progression of the moult, simultaneously sampling skin from three moulting stages in hares collected during the peak of the spring moult from white winter to brown summer pelage. Using RNA sequencing, we tested whether patterns of expression were consistent with predictions based on the established phases of the hair growth cycle. We found functionally consistent clustering across skin types, with 766 genes differentially expressed between moult stages. "White" pelage showed more differentially expressed genes that were upregulated relative to other skin types, involved in the transition between late telogen (quiescent stage) and the onset of anagen (proliferative stage). Skin samples from transitional "intermediate" and "brown" pelage were transcriptionally similar and resembled the regressive transition to catagen (regressive stage). We also detected differential expression of several key circadian clock and pigmentation genes, providing important means to dissect the bases of alternate seasonal colour morphs. Our results reveal that pelage colour is a useful biomarker for seasonal change but that there is a consistent lag between the main gene expression waves and change in visible coat colour. These experiments establish that developmental sampling from natural populations of nonmodel organisms can provide a crucial resource to dissect the genetic basis and evolution of complex seasonally changing traits. © 2017 John Wiley & Sons Ltd.

Impact of a changing environment on the built heritage

NASA Astrophysics Data System (ADS)

Grossi, C. M.; Brimblecombe, P.; Bonazza, A.

2012-04-01

Stone monuments are degraded by both climate and pollution. Deterioration by pollution was especially intense from the 1700s and until the late 20th century the dominant impact of air pollution was the sulfation of surfaces. The parallel deposition of soot caused blackening and on some surfaces dark coloured crusts. The decrease of sulfur and soot from coal combustion during the last decades of the 20th century led to cleaner air in cities, a decrease of pollution-decay rates on building stones and a public desire for cleaner buildings. Although there were decreases in SO2, it was replaced by ozone, nitrogen oxides and particles richer in organic compounds, the result of an extensive use of automobiles. Deposited organic compounds can oxidise in modern urban environments in a yellowing process. The future may reveal variation in building colour from biological growth in a changing climate. In urban atmospheres with less sulfur, biological growth is more effective. A greater rate of delivery of nitrate to building surfaces that acts as "airborne fertiliser" favours colonisation. Depending on climate, there might be different processes (e.g. greening or reddening) and patterns of colouration. Climate is also a relevant factor in the weathering of monuments. Recent research suggests the concept of Heritage Climatology in the study of climate interactions with monuments, materials and sites. These parameters concentrate on aspects and combinations of meteorological variables that relate to material damage. The Köppen-Geiger climate classification can be a good approximation for some heritage risks. For instance, the number of salt transitions shows distinct seasonality which can be related to Köppen-Geiger climate types and their change during the 21th century. The study of changing pollution and climate impacts on the built heritage needs the output of pollution emissions and climate change models, which are prone to uncertainties. The use of multiple climate models or ENSEMBLES may improve the accuracy and reliability of predictions. This approach has been used to predict salt damage. However, more work is needed on the uncertainty in predictions and the way this affects the management of stone heritage. There is public availability of climate and pollution data, but frequently these need to be unified and made user-friendly for cultural heritage researchers in many countries, e.g. the UKCP09 user interface is a good example of friendly-availability for probabilistic projections and downscaled climate change data, but available data are limited to the UK. The utilisation of these improved techniques can contribute to better strategies for managing buildings.

Computer Graphics Meets Image Fusion: the Power of Texture Baking to Simultaneously Visualise 3d Surface Features and Colour

NASA Astrophysics Data System (ADS)

Verhoeven, G. J.

2017-08-01

Since a few years, structure-from-motion and multi-view stereo pipelines have become omnipresent in the cultural heritage domain. The fact that such Image-Based Modelling (IBM) approaches are capable of providing a photo-realistic texture along the threedimensional (3D) digital surface geometry is often considered a unique selling point, certainly for those cases that aim for a visually pleasing result. However, this texture can very often also obscure the underlying geometrical details of the surface, making it very hard to assess the morphological features of the digitised artefact or scene. Instead of constantly switching between the textured and untextured version of the 3D surface model, this paper presents a new method to generate a morphology-enhanced colour texture for the 3D polymesh. The presented approach tries to overcome this switching between objects visualisations by fusing the original colour texture data with a specific depiction of the surface normals. Whether applied to the original 3D surface model or a lowresolution derivative, this newly generated texture does not solely convey the colours in a proper way but also enhances the smalland large-scale spatial and morphological features that are hard or impossible to perceive in the original textured model. In addition, the technique is very useful for low-end 3D viewers, since no additional memory and computing capacity are needed to convey relief details properly. Apart from simple visualisation purposes, the textured 3D models are now also better suited for on-surface interpretative mapping and the generation of line drawings.

Dramatic colour changes in a bird of paradise caused by uniquely structured breast feather barbules.

PubMed

Stavenga, Doekele G; Leertouwer, Hein L; Marshall, N Justin; Osorio, Daniel

2011-07-22

The breast-plate plumage of male Lawes' parotia (Parotia lawesii) produces dramatic colour changes when this bird of paradise displays on its forest-floor lek. We show that this effect is achieved not solely by the iridescence--that is an angular-dependent spectral shift of the reflected light--which is inherent in structural coloration, but is based on a unique anatomical modification of the breast-feather barbule. The barbules have a segmental structure, and in common with many other iridescent feathers, they contain stacked melanin rodlets surrounded by a keratin film. The unique property of the parotia barbules is their boomerang-like cross section. This allows each barbule to work as three coloured mirrors: a yellow-orange reflector in the plane of the feather, and two symmetrically positioned bluish reflectors at respective angles of about 30°. Movement during the parotia's courtship displays thereby achieves much larger and more abrupt colour changes than is possible with ordinary iridescent plumage. To our knowledge, this is the first example of multiple thin film or multi-layer reflectors incorporated in a single structure (engineered or biological). It nicely illustrates how subtle modification of the basic feather structure can achieve novel visual effects. The fact that the parotia's breast feathers seem to be specifically adapted to give much stronger colour changes than normal structural coloration implies that colour change is important in their courtship display.

Recent advances in the biomimicry of structural colours.

PubMed

Dumanli, Ahu Gümrah; Savin, Thierry

2016-12-21

Nature has mastered the construction of nanostructures with well-defined macroscopic effects and purposes. Structural colouration is a visible consequence of the particular patterning of a reflecting surface with regular structures at submicron length scales. Structural colours usually appear bright, shiny, iridescent or with a metallic look, as a result of physical processes such as diffraction, interference, or scattering with a typically small dissipative loss. These features have recently attracted much research effort in materials science, chemistry, engineering and physics, in order to understand and produce structural colours. In these early stages of photonics, researchers facing an infinite array of possible colour-producing structures are heavily inspired by the elaborate architectures they find in nature. We review here the recent technological strategies employed to artificially mimic the structural colours found in nature, as well as some of their current and potential applications.

Printing colour at the optical diffraction limit.

PubMed

Kumar, Karthik; Duan, Huigao; Hegde, Ravi S; Koh, Samuel C W; Wei, Jennifer N; Yang, Joel K W

2012-09-01

The highest possible resolution for printed colour images is determined by the diffraction limit of visible light. To achieve this limit, individual colour elements (or pixels) with a pitch of 250 nm are required, translating into printed images at a resolution of ∼100,000 dots per inch (d.p.i.). However, methods for dispensing multiple colourants or fabricating structural colour through plasmonic structures have insufficient resolution and limited scalability. Here, we present a non-colourant method that achieves bright-field colour prints with resolutions up to the optical diffraction limit. Colour information is encoded in the dimensional parameters of metal nanostructures, so that tuning their plasmon resonance determines the colours of the individual pixels. Our colour-mapping strategy produces images with both sharp colour changes and fine tonal variations, is amenable to large-volume colour printing via nanoimprint lithography, and could be useful in making microimages for security, steganography, nanoscale optical filters and high-density spectrally encoded optical data storage.

Packaging colour research by tobacco companies: the pack as a product characteristic

PubMed Central

Lempert, Lauren K; Glantz, Stanton

2016-01-01

Background Tobacco companies use colour on cigarette packaging and labelling to communicate brand imagery, diminish health concerns, and as a replacement for prohibited descriptive words (‘light’ and ‘mild’) to make misleading claims about reduced risks. Methods We analysed previously secret tobacco industry documents to identify additional ways in which cigarette companies tested and manipulated pack colours to affect consumers’ perceptions of the cigarettes’ flavour and strength. Results Cigarette companies’ approach to package design is based on ‘sensation transference’ in which consumers transfer sensations they derive from the packaging to the product itself. Companies manipulate consumers’ perceptions of the taste and strength of cigarettes by changing the colour of the packaging. For example, even without changes to the tobacco blends, flavourings or additives, consumers perceive the taste of cigarettes in packages with red and darker colours to be fuller flavoured and stronger, and cigarettes in packs with more white and lighter colours are perceived to taste lighter and be less harmful. Conclusions Companies use pack colours to manipulate consumers’ perceptions of the taste, strength and health impacts of the cigarettes inside the packs, thereby altering their characteristics and effectively creating new products. In countries that do not require standardised packaging, regulators should consider colour equivalently to other changes in cigarette characteristics (eg, physical characteristics, ingredients, additives and flavourings) when making determinations about whether or not to permit new products on the market. PMID:27255118

Sentinel-3a: commissioning phase results of its optical payload

NASA Astrophysics Data System (ADS)

Nieke, J.; Mavrocordatos, C.

2017-09-01

The Sentinel-3 (S3) is a Global Land and Ocean Mission [1] currently in development as part of the European Commission's Copernicus programme (former: Global Monitoring for Environment and Security (GMES) [2]). The multi-instrument Sentinel-3 mission measures sea-surface topography, sea- and land-surface temperature, ocean colour and land colour to support ocean forecasting systems, as well as environmental and climate monitoring with near-real time data.

From crypsis to mimicry: changes in colour and the configuration of the visual system during ontogenetic habitat transitions in a coral reef fish.

PubMed

Cortesi, Fabio; Musilová, Zuzana; Stieb, Sara M; Hart, Nathan S; Siebeck, Ulrike E; Cheney, Karen L; Salzburger, Walter; Marshall, N Justin

2016-08-15

Animals often change their habitat throughout ontogeny; yet, the triggers for habitat transitions and how these correlate with developmental changes - e.g. physiological, morphological and behavioural - remain largely unknown. Here, we investigated how ontogenetic changes in body coloration and of the visual system relate to habitat transitions in a coral reef fish. Adult dusky dottybacks, Pseudochromis fuscus, are aggressive mimics that change colour to imitate various fishes in their surroundings; however, little is known about the early life stages of this fish. Using a developmental time series in combination with the examination of wild-caught specimens, we revealed that dottybacks change colour twice during development: (i) nearly translucent cryptic pelagic larvae change to a grey camouflage coloration when settling on coral reefs; and (ii) juveniles change to mimic yellow- or brown-coloured fishes when reaching a size capable of consuming juvenile fish prey. Moreover, microspectrophotometric (MSP) and quantitative real-time PCR (qRT-PCR) experiments show developmental changes of the dottyback visual system, including the use of a novel adult-specific visual gene (RH2 opsin). This gene is likely to be co-expressed with other visual pigments to form broad spectral sensitivities that cover the medium-wavelength part of the visible spectrum. Surprisingly, the visual modifications precede changes in habitat and colour, possibly because dottybacks need to first acquire the appropriate visual performance before transitioning into novel life stages. © 2016. Published by The Company of Biologists Ltd.

Confounding environmental colour and distribution shape leads to underestimation of population extinction risk.

PubMed

Fowler, Mike S; Ruokolainen, Lasse

2013-01-01

The colour of environmental variability influences the size of population fluctuations when filtered through density dependent dynamics, driving extinction risk through dynamical resonance. Slow fluctuations (low frequencies) dominate in red environments, rapid fluctuations (high frequencies) in blue environments and white environments are purely random (no frequencies dominate). Two methods are commonly employed to generate the coloured spatial and/or temporal stochastic (environmental) series used in combination with population (dynamical feedback) models: autoregressive [AR(1)] and sinusoidal (1/f) models. We show that changing environmental colour from white to red with 1/f models, and from white to red or blue with AR(1) models, generates coloured environmental series that are not normally distributed at finite time-scales, potentially confounding comparison with normally distributed white noise models. Increasing variability of sample Skewness and Kurtosis and decreasing mean Kurtosis of these series alter the frequency distribution shape of the realised values of the coloured stochastic processes. These changes in distribution shape alter patterns in the probability of single and series of extreme conditions. We show that the reduced extinction risk for undercompensating (slow growing) populations in red environments previously predicted with traditional 1/f methods is an artefact of changes in the distribution shapes of the environmental series. This is demonstrated by comparison with coloured series controlled to be normally distributed using spectral mimicry. Changes in the distribution shape that arise using traditional methods lead to underestimation of extinction risk in normally distributed, red 1/f environments. AR(1) methods also underestimate extinction risks in traditionally generated red environments. This work synthesises previous results and provides further insight into the processes driving extinction risk in model populations. We must let the characteristics of known natural environmental covariates (e.g., colour and distribution shape) guide us in our choice of how to best model the impact of coloured environmental variation on population dynamics.

Sexual dichromatism in frogs: natural selection, sexual selection and unexpected diversity.

PubMed

Bell, Rayna C; Zamudio, Kelly R

2012-12-07

Sexual dichromatism, a form of sexual dimorphism in which males and females differ in colour, is widespread in animals but has been predominantly studied in birds, fishes and butterflies. Moreover, although there are several proposed evolutionary mechanisms for sexual dichromatism in vertebrates, few studies have examined this phenomenon outside the context of sexual selection. Here, we describe unexpectedly high diversity of sexual dichromatism in frogs and create a comparative framework to guide future analyses of the evolution of these sexual colour differences. We review what is known about evolution of colour dimorphism in frogs, highlight alternative mechanisms that may contribute to the evolution of sexual colour differences, and compare them to mechanisms active in other major groups of vertebrates. In frogs, sexual dichromatism can be dynamic (temporary colour change in males) or ontogenetic (permanent colour change in males or females). The degree and the duration of sexual colour differences vary greatly across lineages, and we do not detect phylogenetic signal in the distribution of this trait, therefore frogs provide an opportunity to investigate the roles of natural and sexual selection across multiple independent derivations of sexual dichromatism.

Laser-induced periodic surface structures on zinc oxide crystals upon two-colour femtosecond double-pulse irradiation

NASA Astrophysics Data System (ADS)

Höhm, S.; Rosenfeld, A.; Krüger, J.; Bonse, J.

2017-03-01

In order to study the temporally distributed energy deposition in the formation of laser-induced periodic surface structures (LIPSS) on single-crystalline zinc oxide (ZnO), two-colour double-fs-pulse experiments were performed. Parallel or cross-polarised double-pulse sequences at 400 and 800 nm wavelength were generated by a Mach-Zehnder interferometer, exhibiting inter-pulse delays up to a few picoseconds between the sub-ablation 50-fs-pulses. Twenty two-colour double-pulse sequences were collinearly focused by a spherical mirror to the sample surface. The resulting LIPSS periods and areas were analysed by scanning electron microscopy. The delay-dependence of these LIPSS characteristics shows a dissimilar behaviour when compared to the semiconductor silicon, the dielectric fused silica, or the metal titanium. A wavelength-dependent plasmonic mechanism is proposed to explain the delay-dependence of the LIPSS on ZnO when considering multi-photon excitation processes. Our results support the involvement of nonlinear processes for temporally overlapping pulses. These experiments extend previous two-colour studies on the indirect semiconductor silicon towards the direct wide band-gap semiconductor ZnO and further manifest the relevance of the ultrafast energy deposition for LIPSS formation.

The effect of colour polymorphism on thermoregulation in an orb web spider.

PubMed

Rao, Dinesh; Mendoza-Cuenca, Luis

2016-08-01

Spiders that build aerial webs in open areas face the risk of overheating due to incident solar radiation. These spiders can counteract overheating by either moving the web to another site or by adopting behavioural thermoregulation within the web. Since moving can be costly, studies have suggested that a passive but effective method of reducing heat load is by light reflectance through body colouration. We explored the interaction between colour and thermoregulation in a colour polymorphic species, under both field and laboratory conditions. We show that in natural conditions, the spiders maintain their body temperature below that of the ambient, but with no difference in surface temperature between colour morphs. In laboratory experiments with internal temperature measurements, white morphs bore the risk of overheating better than the yellow morphs since they heated up slower and cooled faster. We suggest that the thermoregulatory properties of colour polymorphism in Verrucosa arenata have physiological consequences and may play an important role in the maintenance of colour polymorphism in this species.

The effect of colour polymorphism on thermoregulation in an orb web spider

NASA Astrophysics Data System (ADS)

Rao, Dinesh; Mendoza-Cuenca, Luis

2016-08-01

Spiders that build aerial webs in open areas face the risk of overheating due to incident solar radiation. These spiders can counteract overheating by either moving the web to another site or by adopting behavioural thermoregulation within the web. Since moving can be costly, studies have suggested that a passive but effective method of reducing heat load is by light reflectance through body colouration. We explored the interaction between colour and thermoregulation in a colour polymorphic species, under both field and laboratory conditions. We show that in natural conditions, the spiders maintain their body temperature below that of the ambient, but with no difference in surface temperature between colour morphs. In laboratory experiments with internal temperature measurements, white morphs bore the risk of overheating better than the yellow morphs since they heated up slower and cooled faster. We suggest that the thermoregulatory properties of colour polymorphism in Verrucosa arenata have physiological consequences and may play an important role in the maintenance of colour polymorphism in this species.

Muscle-specific colour stability of blesbok (Damaliscus pygargus phillipsi) meat.

PubMed

Neethling, Nikki E; Suman, Surendranath P; Sigge, Gunnar O; Hoffman, Louwrens C

2016-09-01

The increasing demand for meat from alternative species, such as blesbok (Damaliscus pygargus phillipsi), gives rise to the need for characterizing the quality attributes of fresh meat from these species. While muscle-specific colour stability has been extensively studied in conventional livestock, limited information is available on this phenomenon in game meat. Therefore, the objective of this study was to examine the colour stability of three major blesbok muscles, infraspinatus (IS), longissimus thoracis et lumborum (LTL) and biceps femoris (BF). Instrumental colour, surface myoglobin redox forms, and biochemical attributes influencing colour stability were measured on 2.5-cm steaks from blesbok IS, LTL, and BF during refrigerated storage under aerobic conditions for eight days. IS steaks consistently demonstrated higher (P≤0.05) redness, colour stability, and chroma than the LTL and BF steaks. These findings suggested that blesbok IS muscle is more colour-stable than its LTL and BF counterparts. The game industry may employ muscle-specific strategies to improve marketability of fresh blesbok meat. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of coloured lighting on the perception of interior spaces.

PubMed

Odabaşioğlu, Seden; Olguntürk, Nіlgün

2015-02-01

Use of coloured lighting in interior spaces has become prevalent in recent years. Considerable importance is ascribed to coloured lighting in interior and lighting design. The effects of colour on the perception of interior spaces have been studied as surface colour; but here, the effects of three different types of chromatic light were investigated. The lighting differed in colour (red, green and white) and perceptions of interior space were assessed. 97 participants (59 women, 38 men; M age = 21.4 yr.) evaluated the experiment room on a questionnaire assessing eight evaluative factors: Pleasantness, Arousal, Aesthetics, Usefulness, Comfort, Spaciousness, Colour, and Lighting quality. Perceptions of the room differed by colour of lighting for some of the evaluative factors, but there was no sex difference in perceptions. Interior spaces may be perceived as equally pleasant under white, green and red lighting. Under white lighting a space is perceived as more useful, spacious, clear, and luminous. Green lighting would make the same effect. Green and white lighting were perceived equally comfortable in an interior space. Chromatic coloured lighting was perceived to be more aesthetic than white lighting. The results support previous findings for some evaluative factors, but differed for others.

Structural colour: elusive iridescence strategies brought to light.

PubMed

Vukusic, Pete

2011-03-08

Understanding structural colours in nature requires the right set of optical experiments: this is illustrated by a new study on iridescent bird of paradise feathers, which suggests the potential behavioural importance of dynamic colour changes. Copyright © 2011 Elsevier Ltd. All rights reserved.

Photometric assessment of skin colour and lightness using a tristimulus colorimeter: reliability of inter and intra-investigator observations in healthy adult volunteers.

PubMed

Trujillo, O; Vanezis, P; Cermignani, M

1996-07-31

The ageing of injuries is an important aspect of forensic medicine, and one which can have significant medico-legal consequences. The sequence and timing of color changes associated with the appearance and disappearance of bruises, as well as the factors which govern this process, have long been a source of controversy. Whilst visual assessment currently remains the easiest and most practical method available to date bruises, it appears unlikely that it can be relied upon to provide an accurate and consistent measure of the age of a bruise. In an ongoing pilot study designed to assess the applicability of colorimetry to the dating of bruises, the Dr. Lange MICRO COLOR tristimulus colorimeter will be used to assess how the color and colour density (lightness) of bruises change over time. The results of a preliminary study are presented, in which the variability of skin colour measurements obtained by different investigators was assessed. Measurements were taken of the same area on the volar surface of the forearm of five volunteers, after having them remain with their arm motionless for a predetermined period of time (2, 5, and 10 min). Four sets of measurements were taken by each investigator over a total period of 3 h. No significant statistical difference was found after the resting time interval of 5 min between the values obtained by the two investigators (P > 0.05). While studies on a much larger population remain to be completed, our initial findings would seem to suggest that the colorimeter is able to provide an objective, quantitative, and relatively consistent measure of skin colour when used by different individuals.

Spatial variations of brightness, colour and polarization of dust in comet 67P/Churyumov-Gerasimenko

NASA Astrophysics Data System (ADS)

Rosenbush, Vera K.; Ivanova, Oleksandra V.; Kiselev, Nikolai N.; Kolokolova, Ludmilla O.; Afanasiev, Viktor L.

2017-07-01

We present post-perihelion photometric and polarimetric observations of comet 67P/Churyumov-Gerasimenko performed at the 6-m telescope of the SAO RAS in the g-sdss (465/65 nm), r-sdss (620/60 nm) and R filters. Observations in November and December 2015 and April 2016 covered the range of heliocentric distance 1.62-2.72 au and phase angle 33.2°-10.4°. The comet was very active. Two persistent jets and long dust tail were observed during the whole observing period; one more jet was detected only in December. The radial profiles of surface brightness, colour and polarization significantly differed for the coma, jets and tail, and changed with increasing heliocentric distance. The dust production Afρ decreased from 162 cm at r = 1.62 au to 51 cm at r = 2.72 au. The dust colour (g-r) gradually changed from 0.8 mag in the innermost coma to about 0.4 mag in the outer coma. The spectral slope was 8.2 ± 1.7 per cent/100 nm in the 465 to 620 nm wavelength domain. In November and December, the polarization in the near-nucleus area was about 8 per cent, dropped sharply to 2 per cent at the distance above 5000 km and then gradually increased with distance from the nucleus, reaching ˜8 per cent at 40 000 km. In April, at a phase angle 10.4°, the polarization varied between -0.6 per cent in the near-nucleus area and -4 per cent in the outer coma. Circular polarization was not detected in the comet. The spatial variations of brightness, colour and polarization in different structural features suggest some evolution of particle properties, most likely decreasing the size of dust particles.

Grape colour phenotyping: development of a method based on the reflectance spectrum.

PubMed

Rustioni, Laura; Basilico, Roberto; Fiori, Simone; Leoni, Alessandra; Maghradze, David; Failla, Osvaldo

2013-01-01

The colour of fruit is an important quality factor for cultivar classification and phenotyping techniques. Besides the subjective visual evaluation, new instruments and techniques can be used. This work aims at developping an objective, fast, easy and non-destructive method as a useful support for evaluating grapes' colour under different cultural and environmental conditions, as well as for breeding process and germplasm evaluation, supporting the plant characterization and the biodiversity preservation. Colours of 120 grape varieties were studied using reflectance spectra. The classification was realized using cluster and discriminant analysis. Reflectance of the whole berries surface was also compared with absorption properties of single skin extracts. A phenotyping method based on the reflectance spectra was developed, producing reliable colour classifications. A cultivar-independent index for pigment content evaluation has also been obtained. This work allowed the classification of the berry colour using an objective method. Copyright © 2013 John Wiley & Sons, Ltd.

Behavioural evidence for colour vision in an elasmobranch.

PubMed

Van-Eyk, Sarah M; Siebeck, Ulrike E; Champ, Connor M; Marshall, Justin; Hart, Nathan S

2011-12-15

Little is known about the sensory abilities of elasmobranchs (sharks, skates and rays) compared with other fishes. Despite their role as apex predators in most marine and some freshwater habitats, interspecific variations in visual function are especially poorly studied. Of particular interest is whether they possess colour vision and, if so, the role(s) that colour may play in elasmobranch visual ecology. The recent discovery of three spectrally distinct cone types in three different species of ray suggests that at least some elasmobranchs have the potential for functional trichromatic colour vision. However, in order to confirm that these species possess colour vision, behavioural experiments are required. Here, we present evidence for the presence of colour vision in the giant shovelnose ray (Glaucostegus typus) through the use of a series of behavioural experiments based on visual discrimination tasks. Our results show that these rays are capable of discriminating coloured reward stimuli from other coloured (unrewarded) distracter stimuli of variable brightness with a success rate significantly different from chance. This study represents the first behavioural evidence for colour vision in any elasmobranch, using a paradigm that incorporates extensive controls for relative stimulus brightness. The ability to discriminate colours may have a strong selective advantage for animals living in an aquatic ecosystem, such as rays, as a means of filtering out surface-wave-induced flicker.

The unsuitability of HTML-based colour charts for estimating animal colours--a comment on Berggren and Merilä (2004).

PubMed

Stevens, Martin; Cuthill, Innes C

2005-08-30

A variety of techniques are used to study the colours of animal signals, including the use of visual matching to colour charts. This paper aims to highlight why they are generally an unsatisfactory tool for the measurement and classification of animal colours and why colour codes based on HTML (really RGB) standards, as advocated in a recent paper, are particularly inappropriate. There are many theoretical arguments against the use of colour charts, not least that human colour vision differs markedly from that of most other animals. However, the focus of this paper is the concern that, even when applied to humans, there is no simple 1:1 mapping from an RGB colour space to the perceived colours in a chart (the results are both printer- and illumination-dependent). We support our criticisms with data from colour matching experiments with humans, involving self-made, printed colour charts. Colour matching experiments with printed charts involving 11 subjects showed that the choices made by individuals were significantly different between charts that had exactly the same RGB values, but were produced from different printers. Furthermore, individual matches tended to vary under different lighting conditions. Spectrophotometry of the colour charts showed that the reflectance spectra of the charts varied greatly between printers and that equal steps in RGB space were often far from equal in terms of reflectance on the printed charts. In addition to outlining theoretical criticisms of the use of colour charts, our empirical results show that: individuals vary in their perception of colours, that different printers produce strikingly different results when reproducing what should be the same chart, and that the characteristics of the light irradiating the surface do affect colour perception. Therefore, we urge great caution in the use of colour charts to study animal colour signals. They should be used only as a last resort and in full knowledge of their limitations, with specially produced charts made to high industry standards.

3D thermography imaging standardization technique for inflammation diagnosis

NASA Astrophysics Data System (ADS)

Ju, Xiangyang; Nebel, Jean-Christophe; Siebert, J. Paul

2005-01-01

We develop a 3D thermography imaging standardization technique to allow quantitative data analysis. Medical Digital Infrared Thermal Imaging is very sensitive and reliable mean of graphically mapping and display skin surface temperature. It allows doctors to visualise in colour and quantify temperature changes in skin surface. The spectrum of colours indicates both hot and cold responses which may co-exist if the pain associate with an inflammatory focus excites an increase in sympathetic activity. However, due to thermograph provides only qualitative diagnosis information, it has not gained acceptance in the medical and veterinary communities as a necessary or effective tool in inflammation and tumor detection. Here, our technique is based on the combination of visual 3D imaging technique and thermal imaging technique, which maps the 2D thermography images on to 3D anatomical model. Then we rectify the 3D thermogram into a view independent thermogram and conform it a standard shape template. The combination of these imaging facilities allows the generation of combined 3D and thermal data from which thermal signatures can be quantified.

Multispectral and colour analysis for ubiquinone solutions and biological samples

NASA Astrophysics Data System (ADS)

Timofeeva, Elvira O.; Gorbunova, Elena V.; Chertov, Aleksandr N.

2017-02-01

An oxidative damage in cell structures is a basis of most mechanisms that lead to health diseases and senescence of human body. The presence of antioxidant issues such as redox potential imbalance in human body is a very important question for modern clinical diagnostics. Implementation of multispectral and colour analysis of the human skin into optical diagnostics of such wide distributed in a human body antioxidant as ubiquinone can be one of the steps for development of the device with a view to clinical diagnostics of redox potential or quality control of the cosmetics. The recording of multispectral images of the hand skin with monochromatic camera and a set of coloured filters was provided in the current research. Recording data of the multispectral imaging technique was processed using principal component analysis. Also colour characteristics of the skin before and after the skin treatment with facial mask which contains ubiquinone were calculated. The results of the mask treatment were compared with the treatment using oily ubiquinone solution. Despite the fact that results did not give clear explanation about healthy skin or skin stressed by reactive oxygen species, methods which were described in this research are able to identify how skin surface is changing after the antioxidant treatment. In future it is important to provide biomedical tests during the optical tests of the human skin.

Recognising the forest, but not the trees: an effect of colour on scene perception and recognition.

PubMed

Nijboer, Tanja C W; Kanai, Ryota; de Haan, Edward H F; van der Smagt, Maarten J

2008-09-01

Colour has been shown to facilitate the recognition of scene images, but only when these images contain natural scenes, for which colour is 'diagnostic'. Here we investigate whether colour can also facilitate memory for scene images, and whether this would hold for natural scenes in particular. In the first experiment participants first studied a set of colour and greyscale natural and man-made scene images. Next, the same images were presented, randomly mixed with a different set. Participants were asked to indicate whether they had seen the images during the study phase. Surprisingly, performance was better for greyscale than for coloured images, and this difference is due to the higher false alarm rate for both natural and man-made coloured scenes. We hypothesized that this increase in false alarm rate was due to a shift from scrutinizing details of the image to recognition of the gist of the (coloured) image. A second experiment, utilizing images without a nameable gist, confirmed this hypothesis as participants now performed equally on greyscale and coloured images. In the final experiment we specifically targeted the more detail-based perception and recognition for greyscale images versus the more gist-based perception and recognition for coloured images with a change detection paradigm. The results show that changes to images are detected faster when image-pairs were presented in greyscale than in colour. This counterintuitive result held for both natural and man-made scenes (but not for scenes without nameable gist) and thus corroborates the shift from more detailed processing of images in greyscale to more gist-based processing of coloured images.

Correlation of natural tooth colour with aging in the Spanish population.

PubMed

Gómez Polo, Cristina; Gómez Polo, Miguel; Montero, Javier; Martínez Vazquez De Parga, Juan Antonio; Celemin Viñuela, Alicia

2015-10-01

To analyse natural tooth colour in the Spanish population according to the colour coordinates lightness (L*), chroma (C*), hue (h*), red-green axis (a*) and yellow-blue axis (b*) in order to quantify the correlation and changes of tooth colour with age and sex. Natural tooth colour was measured in a sample of 1,361 Spanish participants of both sexes distributed within an age range of 16 to 89 years. The Easyshade Compact spectrophotometer was used and the CIELAB and CIELCh systems were followed. Pearson's bivariate correlations between age and colour coordinates were highly significant for L* (r=-0.674, P≤0.001), h* (r=-0.468, P≤0.001) and C* (r=0.417, P≤0.001). The correlation between age and colour coordinates was stronger for men than for women, for all colour coordinates. The results showed that C*, b* and a* increased by 0.60, 0.56 and 0.26 units/year on average, respectively, whereas L* and h* decreased progressively with age (by 0.60 units/year, on average), and colour differences increased in a systematic way as the gap between the ages being compared grew wider. The strongest correlation was found between age and L*, then between age and h* (both inverse relationships) and then between age and a*, C* and b* (direct relationships). In addition, a similar degree of change in the colour coordinates L*, C* and h* (of 0.60 units/year on average) was observed for natural tooth colour. Knowledge of the chromatic range of natural teeth may help to choose colour for the replacement of missing elements. © 2015 FDI World Dental Federation.

Occupational colour vision requirements for police officers.

PubMed

Birch, Jennifer; Chisholm, Catharine M

2008-11-01

Inclusion of public service professions in the UK Disability Discrimination Act in 2004 prompted a review of occupational colour vision requirements for police officers. Changes in the regulations which existed prior to 2003 were proposed. The aim of this study was to obtain the views of serving police officers in Northern Ireland on the importance of good colour discrimination in everyday police work and on the recruitment regulations for patrol constables introduced in 2003 in mainland UK. These views were obtained by means of a questionnaire and informal discussions. More than 65% of police officers who responded to the questionnaire considered that good colour vision was very important for effective policing. Fewer than 2% considered that colour vision was unimportant. Experienced police officers agreed that the employment of colour-deficient patrol constables, as permitted in the new regulations, would lead to reduced efficiency and organisational difficulties at the local level. A number of everyday activities were described which showed the need for accurate colour discrimination. The change in recruitment policy and the lack of clarity in the new regulations show inadequate appreciation of the needs of the occupation, of different types of colour vision anomalies and of the diagnostic function of colour vision tests. Failure to provide guidance on appropriate colour vision tests, examination procedures and counselling services is likely to result in inconsistent employment policies in different police forces. It is recommended that the colour vision standard in place prior to 2003 is reinstated at the recruitment stage. The Ishihara test should be used for screening, and colour-deficient applicants further examined with the Farnsworth D15 test as a replacement for the City University Test 2nd edition.

Blue-yellow colour vision impairment and cognitive deficits in occasional and dependent stimulant users.

PubMed

Hulka, Lea M; Wagner, Michael; Preller, Katrin H; Jenni, Daniela; Quednow, Boris B

2013-04-01

Specific blue-yellow colour vision impairment has been reported in dependent cocaine users and it was postulated that drug-induced changes in retinal dopamine neurotransmission are responsible. However, it is unclear whether these changes are confined to chronic cocaine users, whether they are specific for dopaminergic stimulants such as cocaine and amphetamine and whether they are related to cognitive functions such as working memory, encoding and consolidation. In 47 occasional and 29 dependent cocaine users, 23 MDMA (commonly known as 'ecstasy') users and 47 stimulant-naive controls, colour vision discrimination was measured with the Lanthony Desaturated Panel D-15 Test and memory performance with the Auditory Verbal Learning Test. Both occasional and dependent cocaine users showed higher colour confusion indices than controls. Users of the serotonergic stimulant MDMA (26%), occasional (30%) and dependent cocaine users (34%) exhibited more frequent blue-yellow colour vision disorders compared to controls (9%). Inferior performance of MDMA users was caused by a subgroup with high amphetamine co-use (55%), while MDMA use alone was not associated with decreased blue-yellow discrimination (0%). Cognitive performance was worse in cocaine users with colour vision disorder compared to users and controls with intact colour vision and both colour vision impairment and cognitive deficits were related to cocaine use. Occasional cocaine and amphetamine use might induce blue-yellow colour vision impairment, whereas the serotonergic stimulant MDMA does not impair colour vision. The association between colour vision impairment and cognitive deficits in cocaine users may reflect that retinal and cerebral dopamine alterations are linked to a certain degree.

Dramatic colour changes in a bird of paradise caused by uniquely structured breast feather barbules

PubMed Central

Stavenga, Doekele G.; Leertouwer, Hein L.; Marshall, N. Justin; Osorio, Daniel

2011-01-01

The breast-plate plumage of male Lawes' parotia (Parotia lawesii) produces dramatic colour changes when this bird of paradise displays on its forest-floor lek. We show that this effect is achieved not solely by the iridescence—that is an angular-dependent spectral shift of the reflected light—which is inherent in structural coloration, but is based on a unique anatomical modification of the breast-feather barbule. The barbules have a segmental structure, and in common with many other iridescent feathers, they contain stacked melanin rodlets surrounded by a keratin film. The unique property of the parotia barbules is their boomerang-like cross section. This allows each barbule to work as three coloured mirrors: a yellow-orange reflector in the plane of the feather, and two symmetrically positioned bluish reflectors at respective angles of about 30°. Movement during the parotia's courtship displays thereby achieves much larger and more abrupt colour changes than is possible with ordinary iridescent plumage. To our knowledge, this is the first example of multiple thin film or multi-layer reflectors incorporated in a single structure (engineered or biological). It nicely illustrates how subtle modification of the basic feather structure can achieve novel visual effects. The fact that the parotia's breast feathers seem to be specifically adapted to give much stronger colour changes than normal structural coloration implies that colour change is important in their courtship display. PMID:21159676

Regulation of eye and jaw colouration in three-spined stickleback Gasterosteus aculeatus.

PubMed

Franco-Belussi, L; De Oliveira, C; Sköld, H N

2018-03-25

Fish can change their skin and eye colour for background matching and signalling. Males of Gasterosteus aculeatus develop ornamental blue eyes and a red jaw during the reproductive season, colours that are further enhanced during courtship. Here, the effects of different hormones on physiological colour changes in the eyes and jaws of male and female G. aculeatus were investigated in vitro. In an in vivo experiment, G. aculeatus were injected with a receptor blocker of a pivotal hormone (noradrenaline) that controls colour change. In males, noradrenaline had aggregating effects on melanophore and erythrophore pigments resulting in blue eyes and a pale jaw, whereas melanocyte-concentrating hormone (MCH) and melatonin resulted in a pale jaw only. When noradrenalin was combined with melanocyte stimulating hormone (MSH) or prolactin, the jaw became red, while the eyes remained blue. In vivo injection of yohimbine, an alpha-2 adrenoreceptor blocker, resulted in dispersion of melanophore pigment in the eyes and inhibited the blue colouration. Altogether, the data suggest that noradrenalin has a pivotal role in the short-term enhancement of the ornamental colouration of male G. aculeatus, potentially together with MSH or prolactin. This study also found a sex difference in the response to MCH, prolactin and melatonin, which may result from different appearance strategies in males, versus the more cryptic females. © 2018 The Fisheries Society of the British Isles.

Metrological characterization methods for confocal chromatic line sensors and optical topography sensors

NASA Astrophysics Data System (ADS)

Seppä, Jeremias; Niemelä, Karri; Lassila, Antti

2018-05-01

The increasing use of chromatic confocal technology for, e.g. fast, in-line optical topography, and measuring thickness, roughness and profiles implies a need for the characterization of various aspects of the sensors. Single-point, line and matrix versions of chromatic confocal technology, encoding depth information into wavelength, have been developed. Of these, line sensors are particularly suitable for in-line process measurement. Metrological characterization and development of practical methods for calibration and checking is needed for new optical methods and devices. Compared to, e.g. tactile methods, optical topography measurement techniques have limitations related to light wavelength and coherence, optical properties of the sample including reflectivity, specularity, roughness and colour, and definition of optical versus mechanical surfaces. In this work, metrological characterization methods for optical line sensors were developed for scale magnification and linearity, sensitivity to sample properties, and dynamic characteristics. An accurate depth scale calibration method using a single prototype groove depth sample was developed for a line sensor and validated with laser-interferometric sample tracking, attaining (sub)micrometre level or better than 0.1% scale accuracy. Furthermore, the effect of different surfaces and materials on the measurement and depth scale was studied, in particular slope angle, specularity and colour. In addition, dynamic performance, noise, lateral scale and resolution were measured using the developed methods. In the case of the LCI1200 sensor used in this study, which has a 11.3 mm  ×  2.8 mm measurement range, the instrument depth scale was found to depend only minimally on sample colour, whereas measuring steeply sloped specular surfaces in the peripheral measurement area, in the worst case, caused a somewhat larger relative sample-dependent change (1%) in scale.

Colour evaluation of a phycobiliprotein-rich extract obtained from Nostoc PCC9205 in acidic solutions and yogurt.

PubMed

de O Moreira, Isabela; Passos, Thaís S; Chiapinni, Claudete; Silveira, Gabrielle K; Souza, Joana C M; Coca-Vellarde, Luis Guillermo; Deliza, Rosires; de Lima Araújo, Kátia G

2012-02-01

Phycobiliproteins are coloured proteins produced by cyanobacteria, which have several applications because of their colour properties. However, there is no available information about the colour stability of phycobiliproteins from Nostoc sp. in food systems. The aim of this work was to study the colour stability of a purple-coloured phycobiliprotein-rich extract from the cyanobacterium Nostoc PCC9205 in acidic solutions and yogurt. Variations of pH for Nostoc PCC9205 extract have shown stability for the L* (lightness) and a* (redness) indexes in the range 1.0-7.0. The b* index (blueness), however, increased at pH values below 4.0, indicating loss of the blue colour. The Nostoc PCC9205 extract was used as colorant in yogurt (pH 4.17) stored for 60 days. Instrumental colour analysis showed no changes for the L* and a* indexes during storage, whereas the b* index changed after 20 days of storage. A multiple comparison test showed colour instability after 20 days of storage. A hedonic scale test performed on the 60th day of storage showed acceptability of the product. The red component of the phycobiliprotein-rich extract from Nostoc PCC9205 presented an improved stability in acidic media and yogurt compared with the blue component of this extract. Copyright © 2011 Society of Chemical Industry.

The physiological and phenotypic determinants of human tanning measured as change in skin colour following a single dose of ultraviolet B radiation.

PubMed

Wong, Terence H; Jackson, Ian J; Rees, Jonathan L

2010-07-01

Experimental study of the in vivo kinetics of tanning in human skin has been limited by the difficulties in measuring changes in melanin pigmentation independent of the ultravioletinduced changes in erythema. The present study attempted to experimentally circumvent this issue. We have studied erythemal and tanning responses following a single exposure to a range of doses of ultraviolet B irradiation on the buttock and the lower back in 98 subjects. Erythema was assessed using reflectance techniques at 24 h and tanning measured as the L* spectrophotometric score at 7 days following noradrenaline iontophoresis. We show that dose (P < 0.0001), body site (P < 0.0001), skin colour (P < 0.0001), ancestry (P = 0.0074), phototype (P = 0.0019) and sex (P = 0.04) are all independent predictors of erythema. Quantitative estimates of the effects of these variables are reported, but the effects of ancestry and phototype do not appear solely explainable in terms of L* score. Dose (P < 0.0001), body site (P < 0.0001) and skin colour (P = 0.0365) or, as an alternative to skin colour, skin type (P = 0.0193) predict tanning, with those with lighter skin tanning slightly more to a defined UVB dose. If erythema is factored into the regression, then only dose and body site remain significant predictors of tanning: therefore neither phototype nor pigmentary factors, such as baseline skin colour, or eye or hair colour, predict change in skin colour to a unit erythemal response.

Effect of colouring green stage zirconia on the adhesion of veneering ceramics with different thermal expansion coefficients

PubMed Central

Aktas, Guliz; Sahin, Erdal; Vallittu, Pekka; Özcan, Mutlu; Lassila, Lippo

2013-01-01

This study evaluated the adhesion of zirconia core ceramics with their corresponding veneering ceramics, having different thermal expansion coefficients (TECs), when zirconia ceramics were coloured at green stage. Zirconia blocks (N=240; 6 mm×7 mm×7 mm) were manufactured from two materials namely, ICE Zirconia (Group 1) and Prettau Zirconia (Group 2). In their green stage, they were randomly divided into two groups. Half of the specimens were coloured with colouring liquid (shade A2). Three different veneering ceramics with different TEC (ICE Ceramic, GC Initial Zr and IPS e.max Ceram) were fired on both coloured and non-coloured zirconia cores. Specimens of high noble alloys (Esteticor Plus) veneered with ceramic (VM 13) (n=16) acted as the control group. Core–veneer interface of the specimens were subjected to shear force in the Universal Testing Machine (0.5 mm⋅min−1). Neither the zirconia core material (P=0.318) nor colouring (P=0.188) significantly affected the results (three-way analysis of variance, Tukey's test). But the results were significantly affected by the veneering ceramic (P=0.000). Control group exhibited significantly higher mean bond strength values (45.7±8) MPa than all other tested groups ((27.1±4.1)−(39.7±4.7) and (27.4±5.6)−(35.9±4.7) MPa with and without colouring, respectively) (P<0.001). While in zirconia–veneer test groups, predominantly mixed type of failures were observed with the veneering ceramic covering <1/3 of the substrate surface, in the metal–ceramic group, veneering ceramic was left adhered >1/3 of the metal surface. Colouring zirconia did not impair adhesion of veneering ceramic, but veneering ceramic had a significant influence on the core–veneer adhesion. Metal–ceramic adhesion was more reliable than all zirconia–veneer ceramics tested. PMID:24158142

Effect of colouring green stage zirconia on the adhesion of veneering ceramics with different thermal expansion coefficients.

PubMed

Aktas, Guliz; Sahin, Erdal; Vallittu, Pekka; Ozcan, Mutlu; Lassila, Lippo

2013-12-01

This study evaluated the adhesion of zirconia core ceramics with their corresponding veneering ceramics, having different thermal expansion coefficients (TECs), when zirconia ceramics were coloured at green stage. Zirconia blocks (N=240; 6 mm×7 mm×7 mm) were manufactured from two materials namely, ICE Zirconia (Group 1) and Prettau Zirconia (Group 2). In their green stage, they were randomly divided into two groups. Half of the specimens were coloured with colouring liquid (shade A2). Three different veneering ceramics with different TEC (ICE Ceramic, GC Initial Zr and IPS e.max Ceram) were fired on both coloured and non-coloured zirconia cores. Specimens of high noble alloys (Esteticor Plus) veneered with ceramic (VM 13) (n=16) acted as the control group. Core-veneer interface of the specimens were subjected to shear force in the Universal Testing Machine (0.5 mm⋅min(-1)). Neither the zirconia core material (P=0.318) nor colouring (P=0.188) significantly affected the results (three-way analysis of variance, Tukey's test). But the results were significantly affected by the veneering ceramic (P=0.000). Control group exhibited significantly higher mean bond strength values (45.7±8) MPa than all other tested groups ((27.1±4.1)-(39.7±4.7) and (27.4±5.6)-(35.9±4.7) MPa with and without colouring, respectively) (P<0.001). While in zirconia-veneer test groups, predominantly mixed type of failures were observed with the veneering ceramic covering <1/3 of the substrate surface, in the metal-ceramic group, veneering ceramic was left adhered >1/3 of the metal surface. Colouring zirconia did not impair adhesion of veneering ceramic, but veneering ceramic had a significant influence on the core-veneer adhesion. Metal-ceramic adhesion was more reliable than all zirconia-veneer ceramics tested.

Estimation of the age of bruising.

PubMed Central

Stephenson, T; Bialas, Y

1996-01-01

Paediatricians are often requested to give an opinion on the age of a non-accidental bruise. In forensic textbooks, the colour changes which a bruise undergoes with time are not based on research in children. The purpose of this study was to document the sequence of colour changes in photographs taken following accidental bruising in children. Fifty accidental bruises of known age in 23 children were photographed by a medical photographer using the same equipment throughout. The photographs were reviewed by a single observer, blind to the true age of the injury, who described the colours present in the bruise. Red colouration was seen in 15 out of 37 bruises which were less than one week old. Yellow colouration was seen in 10 out of 42 bruises over one day old. Aging of bruises from photographs was much less precise than textbooks imply. PMID:8660049

(Re)-wiring a brain with light: Clinical and visual processing findings after application of specific coloured glasses in patients with symptoms of a visual processing disorder (CVPD): Challenge of a possible new perspective?

PubMed

Friederichs, Edgar; Wahl, Siegfried

2017-08-01

The present investigation examined whether changes of electrophysiological late event related potential pattern could be used to reflect clinical changes from therapeutic intervention with coloured glasses in a group of patients with symptoms of central visual processing disorder. Subjects consisted of 13 patients with average age 16years (range 6-51years) with attention problems and learning disability, respectively. These patients were provided with specified coloured glasses which were required to be used during day time. Results indicated that specified coloured glasses significantly improved attention performance. Furthermore electrophysiological parameters revealed a significant change in the late event related potential distribution pattern (latency, amplitudes). This reflects a synchronization of together firing wired neural assemblies responsible for visual processing, suggesting an accelerated neuromaturation process when using coloured glasses. Our results suggest that the visual event related potentials measures are sensitive to changes in clinical development of patients with deficits of visual processing wearing appropriate coloured glasses. It will be discussed whether such a device might be useful for a clinical improvement of distraction symptoms caused by visual processing deficits. A model is presented explaining these effects by inducing the respiratory chain of the mitochondria such increasing the low energy levels of ATP of our patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Site-directed mutagenesis of firefly luciferase: implication of conserved residue(s) in bioluminescence emission spectra among firefly luciferases.

PubMed

Tafreshi, Narges Kh; Sadeghizadeh, Majid; Emamzadeh, Rahman; Ranjbar, Bijan; Naderi-Manesh, Hossein; Hosseinkhani, Saman

2008-05-15

The bioluminescence colours of firefly luciferases are determined by assay conditions and luciferase structure. Owing to red light having lower energy than green light and being less absorbed by biological tissues, red-emitting luciferases have been considered as useful reporters in imaging technology. A set of red-emitting mutants of Lampyris turkestanicus (Iranian firefly) luciferase has been made by site-directed mutagenesis. Among different beetle luciferases, those from Phrixothrix (railroad worm) emit either green or red bioluminescence colours naturally. By substitution of three specific amino acids using site-specific mutagenesis in a green-emitting luciferase (from L. turkestanicus), the colour of emitted light was changed to red concomitant with decreasing decay rate. Different specific mutations (H245N, S284T and H431Y) led to changes in the bioluminescence colour. Meanwhile, the luciferase reaction took place with relative retention of its basic kinetic properties such as K(m) and relative activity. Structural comparison of the native and mutant luciferases using intrinsic fluorescence, far-UV CD spectra and homology modelling revealed a significant conformational change in mutant forms. A change in the colour of emitted light indicates the critical role of these conserved residues in bioluminescence colour determination among firefly luciferases. Relatively high specific activity and emission of red light might make these mutants suitable as reporters for the study of gene expression and bioluminescence imaging.

Development and validation of a questionnaire assessing the quality of life impact of Colour Blindness (CBQoL).

PubMed

Barry, John A; Mollan, Susan; Burdon, Michael A; Jenkins, Michelle; Denniston, Alastair K

2017-10-02

Congenital colour vision deficiency (CVD), commonly called 'colour blindness', affects around 8% of men and 0.4% of women. Although many aspects of health (e.g. change in colour of urine) and healthcare (e.g. coloured medication, colour-coded diagnostic tests), and modern life depend upon colour coding (e.g. graphs, maps, signals), the impact of colour blindness on everyday life is not generally considered a topic of importance. This study is the first to create and validate a questionnaire measuring the quality of life (QoL) impact of being colour blind. This study consisted of two phases. Firstly, the questionnaire design and development phase was led by an expert panel and piloted on a focus group. Secondly, an online sample of 128 men and 291 women filled in the questionnaire, and the psychometric properties of the questionnaire were analysed using principal components analysis (PCA). The scores of colour blind (CB) participants and normal-sighted controls, controlling for age and sex, were compared using matched t-tests. The PCA resulted in a questionnaire with three domains (or subscales): QoL for Health & Lifestyle, QoL for Work, and QoL for Emotions. Controlling for age, there was a significantly greater negative impact on QoL for CB people than normal-sighted controls in regards to confusion over colour in various aspects of their health (p = 5 × 10 -7 ), work (p = 1.3 × 10 -7 ), and emotional life (p = 6 × 10 -5 ). Colour blindness can significantly impact quality of life for health, emotions, and especially careers. The tool developed here could be useful in future clinical studies to measure changes in CBQoL in response to therapy in conditions where colour vision is affected. We also discuss ways in which everyday problems related to colour vision might be reduced, for example, workplaces could avoid colour coding where a non-colour alternative is possible.

Ecological separation in a polymorphic terrestrial salamander.

PubMed

Anthony, Carl D; Venesky, Matthew D; Hickerson, Cari-Ann M

2008-07-01

1. When studying speciation, researchers commonly examine reproductive isolation in recently diverged populations. Polymorphic species provide an opportunity to examine the role of reproductive isolation in populations that may be in the process of divergence. 2. We examined a polymorphic population of Plethodon cinereus (red-backed salamanders) for evidence of sympatric ecological separation by colour morphology. Recent studies have correlated temperature and climate with colour morphology in this species, but no studies have looked at differences in diet or mate choice between colour morphs. We used artificial cover objects to assess salamander diet, mating preference and surface activity over a 2-year period at a field site in north-eastern Ohio. 3. We detected differences in diet between two colour morphs, striped and unstriped. The diets of striped individuals were significantly more diverse and were made up of more profitable prey than the diets of unstriped salamanders. 4. Opposite sex pairs were made up of individuals of the same colour morph and striped males were found more often with larger females than were unstriped males. 5. We corroborate findings of earlier studies suggesting that the unstriped form is adapted to warmer conditions. Unstriped individuals were the first to withdraw from the forest floor as temperatures fell in the late fall. We found no evidence that the colour morphs responded differently to abiotic factors such as soil moisture and relative humidity, and responses to surface temperatures were also equivocal. 6. We conclude that the two colour morphs exhibit some degree of ecological separation and tend to mate assortatively, but are unlikely to be undergoing divergence given the observed frequency of intermorph pairings.

Colour is more than hue: preferences for compiled colour traits in the stingless bees Melipona mondury and M. quadrifasciata.

PubMed

Koethe, Sebastian; Bossems, Jessica; Dyer, Adrian G; Lunau, Klaus

2016-10-01

The colour vision of bees has been extensively analysed in honeybees and bumblebees, but few studies consider the visual perception of stingless bees (Meliponini). In a five-stage experiment the preference for colour intensity and purity, and the preference for the dominant wavelength were tested by presenting four colour stimuli in each test to freely flying experienced workers of two stingless bee species, Melipona mondury and Melipona quadrifasciata. The results with bee-blue, bee-UV-blue and bee-green colours offered in four combinations of varying colour intensity and purity suggest a complex interaction between these colour traits for the determination of colour choice. Specifically, M. mondury preferred bee-UV-blue colours over bee-green, bee-blue and bee-blue-green colours while M. quadrifasciata preferred bee-green colour stimuli. Moreover in M. mondury the preferences were different if the background colour was changed from grey to green. There was a significant difference between species where M. mondury preferred UV-reflecting over UV-absorbing bee-blue-green colour stimuli, whereas M. quadrifasciata showed an opposite preference. The different colour preferences of the free flying bees in identical conditions may be caused by the bees' experience with natural flowers precedent to the choice tests, suggesting reward partitioning between species.

Packaging colour research by tobacco companies: the pack as a product characteristic.

PubMed

Lempert, Lauren K; Glantz, Stanton

2017-05-01

Tobacco companies use colour on cigarette packaging and labelling to communicate brand imagery, diminish health concerns, and as a replacement for prohibited descriptive words ('light' and 'mild') to make misleading claims about reduced risks. We analysed previously secret tobacco industry documents to identify additional ways in which cigarette companies tested and manipulated pack colours to affect consumers' perceptions of the cigarettes' flavour and strength. Cigarette companies' approach to package design is based on 'sensation transference' in which consumers transfer sensations they derive from the packaging to the product itself. Companies manipulate consumers' perceptions of the taste and strength of cigarettes by changing the colour of the packaging. For example, even without changes to the tobacco blends, flavourings or additives, consumers perceive the taste of cigarettes in packages with red and darker colours to be fuller flavoured and stronger, and cigarettes in packs with more white and lighter colours are perceived to taste lighter and be less harmful. Companies use pack colours to manipulate consumers' perceptions of the taste, strength and health impacts of the cigarettes inside the packs, thereby altering their characteristics and effectively creating new products. In countries that do not require standardised packaging, regulators should consider colour equivalently to other changes in cigarette characteristics (eg, physical characteristics, ingredients, additives and flavourings) when making determinations about whether or not to permit new products on the market. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Preservation of iridescent colours in Phorinia Robineau-Desvoidy, 1830 (Diptera: Tachinidae)

PubMed Central

Downes, Stephen; Simonis, Priscilla

2016-01-01

Abstract Background Iridescent blue-green colours are exhibited by various organisms including several taxa in the Tachinidae (Diptera) with notable examples within the Afrotropical members of the genus Phorinia Robineau-Desvoidy, 1830. The vivid colouration observed in life quickly fades to a dull golden-yellow when a specimen is dried. Although well known, no published explanation has been given for this phenomenon. New information We illustrate the mechanism associated with this colour change. We also test and propose technical alternatives to retain the living colours in dried specimens. PMID:26929707

Digital colour management system for colour parameters reconstruction

NASA Astrophysics Data System (ADS)

Grudzinski, Karol; Lasmanowicz, Piotr; Assis, Lucas M. N.; Pawlicka, Agnieszka; Januszko, Adam

2013-10-01

Digital Colour Management System (DCMS) and its application to new adaptive camouflage system are presented in this paper. The DCMS is a digital colour rendering method which would allow for transformation of a real image into a set of colour pixels displayed on a computer monitor. Consequently, it can analyse pixels' colour which comprise images of the environment such as desert, semi-desert, jungle, farmland or rocky mountain in order to prepare an adaptive camouflage pattern most suited for the terrain. This system is described in present work as well as the use the subtractive colours mixing method to construct the real time colour changing electrochromic window/pixel (ECD) for camouflage purpose. The ECD with glass/ITO/Prussian Blue(PB)/electrolyte/CeO2-TiO2/ITO/glass configuration was assembled and characterized. The ECD switched between green and yellow after +/-1.5 V application and the colours have been controlled by Digital Colour Management System and described by CIE LAB parameters.

Evaluation of masticatory function after maxillectomy using a colour-changing chewing gum.

PubMed

Shibuya, Y; Ishida, S; Kobayashi, M; Hasegawa, T; Nibu, K; Komori, T

2013-03-01

The purpose of this study was to identify the risk factors associated with the masticatory dysfunction after maxillectomy using a colour-changing chewing gum. Thirty-nine patients who underwent maxillectomy between January 2002 and May 2010 in the Department of Kobe University Hospital were recruited for this study. There were 20 male and 19 female subjects, with a median age of 73·3 years (range of 44-90) at the time of surgery. The intra-oral conditions after maxillectomy were classified by HS classification, and the masticatory function was evaluated by a colour-changing chewing gum and the results of a modified Sato's questionnaire. The scores of the colour-changing gum were closely correlated with the scores of the modified Sato's questionnaire (r = 0·661, P < 0·01). A logistic regression analysis with the outcome variable of the gum test <4 demonstrated that significant predictors for the masticatory dysfunction were the number of anchor teeth ≤2 and a soft palate defect. A colour-changing gum was found to be useful for evaluating the post-operative masticatory function, and it was important to conserve the anchor teeth and the soft palate to avoid masticatory dysfunction. © 2012 Blackwell Publishing Ltd.

Study by micro-Raman spectroscopy of wall paints (external parts and cross-sections) from reales alcazares of Seville (Spain)

NASA Astrophysics Data System (ADS)

Perez-Rodriguez, José Luis; Centeno, Miguel Angel; Robador, María Dolores; Siguenza, Belinda; Durán, Adrián

2013-04-01

The Reales Alcazares of Sevilla was originally builded by the Arabic in the year 913. The Mudejar Palace was built by Christian King Pedro I between 1364 and 1366. At the end of XV century the Catholic Kings, Isabel and Fernando made important transformations especially in the Mudejar Palace. Recently, wall paints from Catholic Kings periods were found during works of conservations in the first floor of the Palace. The study of these paints by non-destructive techniques was considered of great interest in order to determine the technology of manufacture and the originality of the artwork. The main objective of this work was to apply the Raman spectroscopy technique on the surface of the wall and on the different layers of the cross-sections prepared in order to characterize the pigments and the plaster present in these wall paints. Little information was obtained using a portable Raman spectrometer. In this case the dispersive integrated Horiba Jobin-Yvon LabRaman HR800 system was employed. Small samples of black, red, yellow, white and green colour were taken from the artwork. The surface of the samples were directly studed by the Raman spectroscopy instrument using red (785 nm) and green (522 nm) lasers, similarly to non-invasive experimental technique. This technique showed the presence of gypsum (SO4Ca.2H2O) and calcite (CaCO3) in all the studied samples However, the pigments responsible of different colours were not detected. The surface of these wall paints was covered with gypsum and calcite due to contamination. These mineras were also characterized by XRD and SEM-EDX. The presence of these compounds and the heterogeneous surface did not permit the characterization of the pigments responsible of the colour. In order to better characterization of the pigments and plaster used the study was carried out on cross-sections. The black colour was performed using carbon black. Two different red layers were detected one constituted by cinnabar and lead carbonate and the other one by iron oxides. The green and white colours were constituted by atacamite and calcite, respectively. In addition lead white was detected in green colour. The white layers (plaster) located under the colour layers were constituted by calcite, quartz and feldspars. These data confirm the use of fresco technique. The study of the surface (external part) by micro-Raman spectroscopy limited the characterization of the pigments present in these wall pains, due to the presence of a layer of gypsum deposited on the surface. By other hand, the study by Raman spectroscopy of the cross-sections allowed the characterization of different pigments and support used in the manufacture of these wall paints.

Structural colour printing from a reusable generic nanosubstrate masked for the target image

NASA Astrophysics Data System (ADS)

Rezaei, M.; Jiang, H.; Kaminska, B.

2016-02-01

Structural colour printing has advantages over traditional pigment-based colour printing. However, the high fabrication cost has hindered its applications in printing large-area images because each image requires patterning structural pixels in nanoscale resolution. In this work, we present a novel strategy to print structural colour images from a pixelated substrate which is called a nanosubstrate. The nanosubstrate is fabricated only once using nanofabrication tools and can be reused for printing a large quantity of structural colour images. It contains closely packed arrays of nanostructures from which red, green, blue and infrared structural pixels can be imprinted. To print a target colour image, the nanosubstrate is first covered with a mask layer to block all the structural pixels. The mask layer is subsequently patterned according to the target colour image to make apertures of controllable sizes on top of the wanted primary colour pixels. The masked nanosubstrate is then used as a stamp to imprint the colour image onto a separate substrate surface using nanoimprint lithography. Different visual colours are achieved by properly mixing the red, green and blue primary colours into appropriate ratios controlled by the aperture sizes on the patterned mask layer. Such a strategy significantly reduces the cost and complexity of printing a structural colour image from lengthy nanoscale patterning into high throughput micro-patterning and makes it possible to apply structural colour printing in personalized security features and data storage. In this paper, nanocone array grating pixels were used as the structural pixels and the nanosubstrate contains structures to imprint the nanocone arrays. Laser lithography was implemented to pattern the mask layer with submicron resolution. The optical properties of the nanocone array gratings are studied in detail. Multiple printed structural colour images with embedded covert information are demonstrated.

Annealing dynamics of waveguide Bragg gratings: evidence of femtosecond laser induced colour centres.

PubMed

Dekker, P; Ams, M; Marshall, G D; Little, D J; Withford, M J

2010-02-15

There is still significant speculation regarding the nature of femtosecond laser induced index change in bulk glasses with colour centre formation and densification the main candidates. In the work presented here, we fabricated waveguide Bragg gratings in doped and undoped phosphate glasses and use these as a diagnostic for monitoring subtle changes in the induced refractive index during photo- and thermal annealing experiments. Reductions in grating strengths during such experiments were attributed to the annihilation of colour centres.

Harmonic technology versus neodymium-doped yttrium aluminium garnet laser and electrocautery for lung metastasectomy: an experimental study.

PubMed

Fiorelli, Alfonso; Accardo, Marina; Carelli, Emanuele; Del Prete, Assunta; Messina, Gaetana; Reginelli, Alfonso; Berritto, Daniela; Papale, Ferdinando; Armenia, Emilia; Chiodini, Paolo; Grassi, Roberto; Santini, Mario

2016-07-01

We compared the efficacy of non-anatomical lung resections with that of three other techniques: monopolar electrocautery; neodymium-doped yttrium aluminium garnet laser and harmonic technology. We hypothesized that the thermal damage with harmonic technology could be reduced because of the lower temperatures generated by harmonic technology compared with that of other devices. Initial studies were performed in 13 isolated pig lungs for each group. A 1.5-cm capsule was inserted within the lung to mimic a tumour and a total of 25 non-anatomical resections were performed with each device. The damage of the resected lung surface and of the tumour border were evaluated according to the colour (ranging from 0-pink colour to 4-black colour), histological (ranging from Score 0-no changes to Score 3-presence of necrotic tissue) and radiological (ranging from Score 0-isointense T2 signal at magnetic resonance imaging to Score 3-hyperintense T2 signal) criteria. A total of seven non-anatomical resections with harmonic technology were also performed in two live pigs to assess if ex vivo results could be reproducible in live pigs with particular attention to haemostatic and air-tightness properties. In the ex vivo lung, there was a statistical significant difference between depth of thermal damage (P < 0.0001) in electrocautery (1.3 [1.2-1.4]), laser (0.9 [0.6-0.9]) and harmonic (0.4 [0.3-0.5]) groups. Electrocautery had a higher depth of thermal damage compared with that of the laser (P = 0.01) and harmonic groups (P = 0.0005). The harmonic group had a less depth of thermal damage than that of the laser group (P = 0.01). Also, histological damages of tumour borders (P < 0.001) and resected lung surface (P < 0.001), radiological damage of tumour borders (P < 0.001) and resected lung surface (P < 0.001) and colour changes (P < 0.001) were statistically different between three study groups. Resections of in vivo pig lungs showed no bleeding; 2 of 7 cases of low air leaks were found; however, they ceased by sealing lung parenchyma with harmonic technology. Our experimental data support the resections performed with the use of harmonic technology. The lack of severe tissue alterations could favour healing of parenchyma, assure air tightness and preserve functional lung parenchyma. However, randomized controlled studies are needed in an in vivo model to corroborate our findings. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Non-binary Colour Modulation for Display Device Based on Phase Change Materials.

PubMed

Ji, Hong-Kai; Tong, Hao; Qian, Hang; Hui, Ya-Juan; Liu, Nian; Yan, Peng; Miao, Xiang-Shui

2016-12-19

A reflective-type display device based on phase change materials is attractive because of its ultrafast response time and high resolution compared with a conventional display device. This paper proposes and demonstrates a unique display device in which multicolour changing can be achieved on a single device by the selective crystallization of double layer phase change materials. The optical contrast is optimized by the availability of a variety of film thicknesses of two phase change layers. The device exhibits a low sensitivity to the angle of incidence, which is important for display and colour consistency. The non-binary colour rendering on a single device is demonstrated for the first time using optical excitation. The device shows the potential for ultrafast display applications.

Measurements and modelling of the influence of dentine colour and enamel on tooth colour.

PubMed

Battersby, Paul D; Battersby, Stephen J

2015-03-01

We provide a quantitative predictive model for the extent to which coloured dentine, visible through the enamel, contributes to tooth colour. Our model uses (L(*),a(*),b(*)) measurements rather than spectral measurements. We have used a model system, composed of a slice of bovine enamel placed on top of coloured paper. We have measured the colour of the enamel-paper combination, as an analogue for a tooth, and have related this to the colour of the paper, as an analogue for dentine. By changing the paper colour, we have been able to explore how the colour of dentine determines tooth colour, according to our model system. We have also compared hydrated and desiccated samples. In qualitative terms, superimposing the enamel on top of the paper increases the "lightness" for all colours tested except white while simultaneously reducing the chromaticity, a measure of the extent to which the colour differs from grey. Desiccated enamel is much more effective at increasing the lightness and reducing the chromaticity than hydrated enamel. Quantitatively, our measurements are reproduced by the mathematical model we have developed to within 2% in "lightness" and about 8% in chromaticity. We are able to predict the colour of an analogue for a tooth, composed of bovine enamel and coloured paper, from the colour of an analogue for the dentine, the coloured paper alone, with good accuracy. This understanding provides insights into the role of dentine colour in determining tooth colour. Our work helps quantify the importance of dentine colour, compared to other, extrinsic causes of colour, such as staining, in determining the visible colour of teeth. Our predicted colours represent a baseline to which extrinsic sources will add. Copyright © 2015. Published by Elsevier Ltd.

Multivariate methods to visualise colour-space and colour discrimination data.

PubMed

Hastings, Gareth D; Rubin, Alan

2015-01-01

Despite most modern colour spaces treating colour as three-dimensional (3-D), colour data is usually not visualised in 3-D (and two-dimensional (2-D) projection-plane segments and multiple 2-D perspective views are used instead). The objectives of this article are firstly, to introduce a truly 3-D percept of colour space using stereo-pairs, secondly to view colour discrimination data using that platform, and thirdly to apply formal statistics and multivariate methods to analyse the data in 3-D. This is the first demonstration of the software that generated stereo-pairs of RGB colour space, as well as of a new computerised procedure that investigated colour discrimination by measuring colour just noticeable differences (JND). An initial pilot study and thorough investigation of instrument repeatability were performed. Thereafter, to demonstrate the capabilities of the software, five colour-normal and one colour-deficient subject were examined using the JND procedure and multivariate methods of data analysis. Scatter plots of responses were meaningfully examined in 3-D and were useful in evaluating multivariate normality as well as identifying outliers. The extent and direction of the difference between each JND response and the stimulus colour point was calculated and appreciated in 3-D. Ellipsoidal surfaces of constant probability density (distribution ellipsoids) were fitted to response data; the volumes of these ellipsoids appeared useful in differentiating the colour-deficient subject from the colour-normals. Hypothesis tests of variances and covariances showed many statistically significant differences between the results of the colour-deficient subject and those of the colour-normals, while far fewer differences were found when comparing within colour-normals. The 3-D visualisation of colour data using stereo-pairs, as well as the statistics and multivariate methods of analysis employed, were found to be unique and useful tools in the representation and study of colour. Many additional studies using these methods along with the JND and other procedures have been identified and will be reported in future publications. © 2014 The Authors Ophthalmic & Physiological Optics © 2014 The College of Optometrists.

Analysis of Specular Reflections Off Geostationary Satellites

NASA Astrophysics Data System (ADS)

Jolley, A.

2016-09-01

Many photometric studies of artificial satellites have attempted to define procedures that minimise the size of datasets required to infer information about satellites. However, it is unclear whether deliberately limiting the size of datasets significantly reduces the potential for information to be derived from them. In 2013 an experiment was conducted using a 14 inch Celestron CG-14 telescope to gain multiple night-long, high temporal resolution datasets of six geostationary satellites [1]. This experiment produced evidence of complex variations in the spectral energy distribution (SED) of reflections off satellite surface materials, particularly during specular reflections. Importantly, specific features relating to the SED variations could only be detected with high temporal resolution data. An update is provided regarding the nature of SED and colour variations during specular reflections, including how some of the variables involved contribute to these variations. Results show that care must be taken when comparing observed spectra to a spectral library for the purpose of material identification; a spectral library that uses wavelength as the only variable will be unable to capture changes that occur to a material's reflected spectra with changing illumination and observation geometry. Conversely, colour variations with changing illumination and observation geometry might provide an alternative means of determining material types.

Analysis of colour stability of selected provisional prosthetic materials: an in vitro study.

PubMed

Koczorowski, Ryszard; Linkowska-Swidzińska, Kamila; Gedrange, Tomasz; Swidziński, Teodor

2009-08-01

Prosthetic restorative materials (that are) used for temporary fixed dentures tend to exhibit variable discolouration over several weeks of use. The aim of this study was to perform a spectrophotometric analysis of the influence of selected discolouring factors on the colour stability of provisional prosthetic materials in vitro. In the study, the following prosthetic materials for short-term use in the oral cavity were evaluated: Luxatemp, Structur 2S.C., Protemp II, Zhermacryl STC and Dentalon Plus. Samples of these materials were immersed in coffee, tea and dark fruit juice for 60 h at different pH values. Colour was evaluated by determining the monochromatic coefficients of light reflected by the samples, using a spectrophotometric method. Results received in artificial light (illuminant A) were compared with those obtained in daylight (illuminant D65). Changes in colour and its parameters according to the CIE L*a*b* system were analysed. The analysis (of the colour and colour parameters) of the tested materials in two types of light showed that Structur displayed the greatest tendency to discolouration and that the least tendency to discolouration was exhibited by Dentalon Plus. The fact that colour parameters obtained in two types of light were not identical suggests that changes in the colour of the same material may be perceived differently, depending on the illuminant. Provisional prosthetic materials show variable colour stability under different conditions in the oral cavity. The colour of prosthetic materials may be perceived differently, depending on the illuminant and the effect of the environment in which they are used.

Yellow and the Novel Aposematic Signal, Red, Protect Delias Butterflies from Predators

PubMed Central

Wee, Jocelyn Liang Qi

2017-01-01

Butterflies of the South Asian and Australian genus Delias possess striking colours on the ventral wings that are presumed to serve as warning signals to predators. However, this has not been shown empirically. Here we experimentally tested whether the colours of one member of this diverse genus, Delias hyparete, function as aposematic signals. We constructed artificial paper models with either a faithful colour representation of D. hyparete, or with all of its colours converted to grey scale. We also produced models where single colours were left intact, while others were converted to grey-scale or removed entirely. We placed all model types simultaneously in the field, attached to a live mealworm, and measured relative attack rates at three separate field sites. Faithful models of D. hyparete, suffered the least amount of attacks, followed by grey-scale models with unaltered red patches, and by grey-scale models with unaltered yellow patches. We conclude that red and yellow colours function as warning signals. By mapping dorsal and ventral colouration onto a phylogeny of Delias, we observed that yellow and red colours appear almost exclusively on the ventral wing surfaces, and that basal lineages have mostly yellow, white, and black wings, whereas derived lineages contain red colour in addition to the other colours. Red appears to be, thus, a novel adaptive trait in this lineage of butterflies. PMID:28060944

Yellow and the Novel Aposematic Signal, Red, Protect Delias Butterflies from Predators.

PubMed

Wee, Jocelyn Liang Qi; Monteiro, Antónia

2017-01-01

Butterflies of the South Asian and Australian genus Delias possess striking colours on the ventral wings that are presumed to serve as warning signals to predators. However, this has not been shown empirically. Here we experimentally tested whether the colours of one member of this diverse genus, Delias hyparete, function as aposematic signals. We constructed artificial paper models with either a faithful colour representation of D. hyparete, or with all of its colours converted to grey scale. We also produced models where single colours were left intact, while others were converted to grey-scale or removed entirely. We placed all model types simultaneously in the field, attached to a live mealworm, and measured relative attack rates at three separate field sites. Faithful models of D. hyparete, suffered the least amount of attacks, followed by grey-scale models with unaltered red patches, and by grey-scale models with unaltered yellow patches. We conclude that red and yellow colours function as warning signals. By mapping dorsal and ventral colouration onto a phylogeny of Delias, we observed that yellow and red colours appear almost exclusively on the ventral wing surfaces, and that basal lineages have mostly yellow, white, and black wings, whereas derived lineages contain red colour in addition to the other colours. Red appears to be, thus, a novel adaptive trait in this lineage of butterflies.

Colour polymorphism is associated with lower extinction risk in birds.

PubMed

Ducatez, Simon; Giraudeau, Mathieu; Thébaud, Christophe; Jacquin, Lisa

2017-08-01

Colour polymorphisms have played a major role in enhancing current understanding of how selection and demography can impact phenotypes. Because different morphs often display alternative strategies and exploit alternative ecological niches, colour polymorphism can be expected to promote adaptability to environmental changes. However, whether and how it could influence populations' and species' response to global changes remains debated. To address this question, we built an up-to-date and complete database on avian colour polymorphism based on the examination of available data from all 10,394 extant bird species. We distinguished between true polymorphism (where different genetically determined morphs co-occur in sympatry within the same population) and geographic variation (parapatric or allopatric colour variation), because these two patterns of variation are expected to have different consequences on populations' persistence. Using the IUCN red list, we then showed that polymorphic bird species are at lesser risk of extinction than nonpolymorphic ones, after controlling for a range of factors such as geographic range size, habitat breadth, life history, and phylogeny. This appears consistent with the idea that high genetic diversity and/or the existence of alternative strategies in polymorphic species promotes the ability to adaptively respond to changing environmental conditions. In contrast, polymorphic species were not less vulnerable than nonpolymorphic ones to specific drivers of extinction such as habitat alteration, direct exploitation, climate change, and invasive species. Thus, our results suggest that colour polymorphism acts as a buffer against environmental changes, although further studies are now needed to understand the underlying mechanisms. Developing accurate quantitative indices of sensitivity to specific threats is likely a key step towards a better understanding of species response to environmental changes. © 2017 John Wiley & Sons Ltd.

Isolation and cDNA cloning of a novel red colour-related pigment-binding protein derived from the shell of the shrimp, Litopenaeus vannamei.

PubMed

Pan, Chuang; Ishizaki, Shoichiro; Nagashima, Yuji; Gao, Jialong; Watabe, Shugo

2018-02-15

Pigment-binding proteins play important roles in crustacean shell colour change. In this study, a red colour-related pigment-binding protein, designated LvPBP75, was purified from the shell of Litopenaeus vannamei. HPLC and PAGE analysis showed that LvPBP75 was a homogeneous monomer with molecular mass of 75kDa. Peptide mass fingerprint analysis revealed that LvPBP75 belonged to hemocyanin, and the released pigment from heated LvPBP75 showed a λ max at 481nm in acetone. The significant red-colour change temperatures were detected at 30 and 80°C, respectively. Based on the determined amino acid fragments, a full-length cDNA of LvPBP75 was cloned and sequenced. The ORF encodes a protein of 662 amino acids having 80% identity with penaeidae hemocyanin. These results strongly suggest a novel function of hemocyanin, namely binding with pigment, and its involvement in L. vannamei shell colour change. Copyright © 2017 Elsevier Ltd. All rights reserved.

Ocean surface partitioning strategies using ocean colour remote Sensing: A review

NASA Astrophysics Data System (ADS)

Krug, Lilian Anne; Platt, Trevor; Sathyendranath, Shubha; Barbosa, Ana B.

2017-06-01

The ocean surface is organized into regions with distinct properties reflecting the complexity of interactions between environmental forcing and biological responses. The delineation of these functional units, each with unique, homogeneous properties and underlying ecosystem structure and dynamics, can be defined as ocean surface partitioning. The main purposes and applications of ocean partitioning include the evaluation of particular marine environments; generation of more accurate satellite ocean colour products; assimilation of data into biogeochemical and climate models; and establishment of ecosystem-based management practices. This paper reviews the diverse approaches implemented for ocean surface partition into functional units, using ocean colour remote sensing (OCRS) data, including their purposes, criteria, methods and scales. OCRS offers a synoptic, high spatial-temporal resolution, multi-decadal coverage of bio-optical properties, relevant to the applications and value of ocean surface partitioning. In combination with other biotic and/or abiotic data, OCRS-derived data (e.g., chlorophyll-a, optical properties) provide a broad and varied source of information that can be analysed using different delineation methods derived from subjective, expert-based to unsupervised learning approaches (e.g., cluster, fuzzy and empirical orthogonal function analyses). Partition schemes are applied at global to mesoscale spatial coverage, with static (time-invariant) or dynamic (time-varying) representations. A case study, the highly heterogeneous area off SW Iberian Peninsula (NE Atlantic), illustrates how the selection of spatial coverage and temporal representation affects the discrimination of distinct environmental drivers of phytoplankton variability. Advances in operational oceanography and in the subject area of satellite ocean colour, including development of new sensors, algorithms and products, are among the potential benefits from extended use, scope and applications of ocean surface partitioning using OCRS.

Cross-modal associations in synaesthesia: Vowel colours in the ear of the beholder.

PubMed

Moos, Anja; Smith, Rachel; Miller, Sam R; Simmons, David R

2014-01-01

Human speech conveys many forms of information, but for some exceptional individuals (synaesthetes), listening to speech sounds can automatically induce visual percepts such as colours. In this experiment, grapheme-colour synaesthetes and controls were asked to assign colours, or shades of grey, to different vowel sounds. We then investigated whether the acoustic content of these vowel sounds influenced participants' colour and grey-shade choices. We found that both colour and grey-shade associations varied systematically with vowel changes. The colour effect was significant for both participant groups, but significantly stronger and more consistent for synaesthetes. Because not all vowel sounds that we used are "translatable" into graphemes, we conclude that acoustic-phonetic influences co-exist with established graphemic influences in the cross-modal correspondences of both synaesthetes and non-synaesthetes.

Shape, colour plasticity, and habitat use indicate morph-specific camouflage strategies in a marine shrimp.

PubMed

Duarte, Rafael C; Stevens, Martin; Flores, Augusto A V

2016-10-18

Colour and shape polymorphisms are important features of many species and may allow individuals to exploit a wider array of habitats, including through behavioural differences among morphs. In addition, differences among individuals in behaviour and morphology may reflect different strategies, for example utilising different approaches to camouflage. Hippolyte obliquimanus is a small shrimp species inhabiting different shallow-water vegetated habitats. Populations comprise two main morphs: homogeneous shrimp of variable colour (H) and transparent individuals with coloured stripes (ST). These morphs follow different distribution patterns between their main algal habitats; the brown weed Sargassum furcatum and the pink-red weed Galaxaura marginata. In this study, we first investigated morph-specific colour change and habitat selection, as mechanisms underlying camouflage and spatial distribution patterns in nature. Then, we examined habitat fidelity, mobility, and morphological traits, further indicating patterns of habitat use. H shrimp are capable of changing colour in just a few days towards their algal background, achieving better concealment in the more marginal, and less preferred, red weed habitat. Furthermore, laboratory trials showed that habitat fidelity is higher for H shrimp, whereas swimming activity is higher for the ST morph, aligned to morphological evidence indicating these two morphs comprise a more benthic (H) and a more pelagic (ST) life-style, respectively. Results suggest that H shrimp utilise a camouflage strategy specialised to a limited number of backgrounds at any one time, whereas ST individuals comprise a phenotype with more generalist camouflage (transparency) linked to a more generalist background utilisation. The coexistence within a population of distinct morphotypes with apparently alternative strategies of habitat use and camouflage may reflect differential responses to substantial seasonal changes in macroalgal cover. Our findings also demonstrate how colour change, behaviour, morphology, and background use all interact in achieving camouflage.

Mimicking the colourful wing scale structure of the Papilio blumei butterfly.

PubMed

Kolle, Mathias; Salgard-Cunha, Pedro M; Scherer, Maik R J; Huang, Fumin; Vukusic, Pete; Mahajan, Sumeet; Baumberg, Jeremy J; Steiner, Ullrich

2010-07-01

The brightest and most vivid colours in nature arise from the interaction of light with surfaces that exhibit periodic structure on the micro- and nanoscale. In the wings of butterflies, for example, a combination of multilayer interference, optical gratings, photonic crystals and other optical structures gives rise to complex colour mixing. Although the physics of structural colours is well understood, it remains a challenge to create artificial replicas of natural photonic structures. Here we use a combination of layer deposition techniques, including colloidal self-assembly, sputtering and atomic layer deposition, to fabricate photonic structures that mimic the colour mixing effect found on the wings of the Indonesian butterfly Papilio blumei. We also show that a conceptual variation to the natural structure leads to enhanced optical properties. Our approach offers improved efficiency, versatility and scalability compared with previous approaches.

High fitness costs of climate change-induced camouflage mismatch.

PubMed

Zimova, Marketa; Mills, L Scott; Nowak, J Joshua

2016-03-01

Anthropogenic climate change has created myriad stressors that threaten to cause local extinctions if wild populations fail to adapt to novel conditions. We studied individual and population-level fitness costs of a climate change-induced stressor: camouflage mismatch in seasonally colour molting species confronting decreasing snow cover duration. Based on field measurements of radiocollared snowshoe hares, we found strong selection on coat colour molt phenology, such that animals mismatched with the colour of their background experienced weekly survival decreases up to 7%. In the absence of adaptive response, we show that these mortality costs would result in strong population-level declines by the end of the century. However, natural selection acting on wide individual variation in molt phenology might enable evolutionary adaptation to camouflage mismatch. We conclude that evolutionary rescue will be critical for hares and other colour molting species to keep up with climate change. © 2016 The Authors. Ecology Letters published by CNRS and John Wiley & Sons Ltd.

Effect of background colour on growth and adhesion strength of Ulva sporelings.

PubMed

Finlay, John A; Fletcher, Benjamin R; Callow, Maureen E; Callow, James A

2008-01-01

This study examined the effects of a range of black, grey and white substrata on the growth and attachment strength of Ulva sporelings on glass and polydimethylsiloxane (Silastic-T2) surfaces. The rate of development of sporelings was strongly influenced by the colour of the substratum on which they grew. On black backgrounds, sporelings grew slowly and germination was delayed. Laboratory screening methods for antifouling and fouling-release coatings that rely on the growth of Ulva sporelings can be compromised if samples are of different colours. Hydrodynamic removal of sporelings from coatings may also be affected by substratum colour, since smaller plants generate lower hydrodynamic forces making them more difficult to remove.

The unsuitability of html-based colour charts for estimating animal colours – a comment on Berggren and Merilä (2004)

PubMed Central

Stevens, Martin; Cuthill, Innes C

2005-01-01

Background A variety of techniques are used to study the colours of animal signals, including the use of visual matching to colour charts. This paper aims to highlight why they are generally an unsatisfactory tool for the measurement and classification of animal colours and why colour codes based on HTML (really RGB) standards, as advocated in a recent paper, are particularly inappropriate. There are many theoretical arguments against the use of colour charts, not least that human colour vision differs markedly from that of most other animals. However, the focus of this paper is the concern that, even when applied to humans, there is no simple 1:1 mapping from an RGB colour space to the perceived colours in a chart (the results are both printer- and illumination-dependent). We support our criticisms with data from colour matching experiments with humans, involving self-made, printed colour charts. Results Colour matching experiments with printed charts involving 11 subjects showed that the choices made by individuals were significantly different between charts that had exactly the same RGB values, but were produced from different printers. Furthermore, individual matches tended to vary under different lighting conditions. Spectrophotometry of the colour charts showed that the reflectance spectra of the charts varied greatly between printers and that equal steps in RGB space were often far from equal in terms of reflectance on the printed charts. Conclusion In addition to outlining theoretical criticisms of the use of colour charts, our empirical results show that: individuals vary in their perception of colours, that different printers produce strikingly different results when reproducing what should be the same chart, and that the characteristics of the light irradiating the surface do affect colour perception. Therefore, we urge great caution in the use of colour charts to study animal colour signals. They should be used only as a last resort and in full knowledge of their limitations, with specially produced charts made to high industry standards. PMID:16131394

The development of vector based 2.5D print methods for a painting machine

NASA Astrophysics Data System (ADS)

Parraman, Carinna

2013-02-01

Through recent trends in the application of digitally printed decorative finishes to products, CAD, 3D additive layer manufacturing and research in material perception, [1, 2] there is a growing interest in the accurate rendering of materials and tangible displays. Although current advances in colour management and inkjet printing has meant that users can take for granted high-quality colour and resolution in their printed images, digital methods for transferring a photographic coloured image from screen to paper is constrained by pixel count, file size, colorimetric conversion between colour spaces and the gamut limits of input and output devices. This paper considers new approaches to applying alternative colour palettes by using a vector-based approach through the application of paint mixtures, towards what could be described as a 2.5D printing method. The objective is to not apply an image to a textured surface, but where texture and colour are integral to the mark, that like a brush, delineates the contours in the image. The paper describes the difference between the way inks and paints are mixed and applied. When transcribing the fluid appearance of a brush stroke, there is a difference between a halftone printed mark and a painted mark. The issue of surface quality is significant to subjective qualities when studying the appearance of ink or paint on paper. The paper provides examples of a range of vector marks that are then transcribed into brush stokes by the painting machine.

Thermal consequences of colour and near-infrared reflectance.

PubMed

Stuart-Fox, Devi; Newton, Elizabeth; Clusella-Trullas, Susana

2017-07-05

The importance of colour for temperature regulation in animals remains controversial. Colour can affect an animal's temperature because all else being equal, dark surfaces absorb more solar energy than do light surfaces, and that energy is converted into heat. However, in reality, the relationship between colour and thermoregulation is complex and varied because it depends on environmental conditions and the physical properties, behaviour and physiology of the animal. Furthermore, the thermal effects of colour depend as much on absorptance of near-infrared ((NIR), 700-2500 nm) as visible (300-700 nm) wavelengths of direct sunlight; yet the NIR is very rarely considered or measured. The few available data on NIR reflectance in animals indicate that the visible reflectance is often a poor predictor of NIR reflectance. Adaptive variation in animal coloration (visible reflectance) reflects a compromise between multiple competing functions such as camouflage, signalling and thermoregulation. By contrast, adaptive variation in NIR reflectance should primarily reflect thermoregulatory requirements because animal visual systems are generally insensitive to NIR wavelengths. Here, we assess evidence and identify key research questions regarding the thermoregulatory function of animal coloration, and specifically consider evidence for adaptive variation in NIR reflectance.This article is part of the themed issue 'Animal coloration: production, perception, function and application'. © 2017 The Author(s).

Human colour in mate choice and competition.

PubMed

Rowland, Hannah M; Burriss, Robert P

2017-07-05

The colour of our skin and clothing affects how others perceive us and how we behave. Human skin colour varies conspicuously with genetic ancestry, but even subtle changes in skin colour due to diet, blood oxygenation and hormone levels influence social perceptions. In this review, we describe the theoretical and empirical frameworks in which human colour is researched. We explore how subtle skin colour differences relate to judgements of health and attractiveness. Also, because humans are one of the few organisms able to manipulate their apparent colour, we review how cosmetics and clothing are implicated in courtship and competition, both inside the laboratory and in the real world. Research on human colour is in its infancy compared with human psychophysics and colour research in non-human animals, and hence we present best-practice guidelines for methods and reporting, which we hope will improve the validity and reproducibility of studies on human coloration.This article is part of the themed issue 'Animal coloration: production, perception, function and application'. © 2017 The Author(s).

Colour preferences influences odour learning in the hawkmoth, Macroglossum stellatarum

NASA Astrophysics Data System (ADS)

Balkenius, Anna; Kelber, Almut

2006-05-01

The hummingbird hawkmoth, Macroglossum stellatarum, learns colour fast and reliably. It has earlier been shown to spontaneously feed from odourless artificial flowers. Now, we have studied odour learning. The moths were trained to discriminate feeders of the same colour but marked with different odours. They did not learn to discriminate two natural flower odours when they were presented with the innately preferred colour blue, but they did learn this discrimination combined with yellow or green colours that are less attractive to the moth. The yellow colour could be trained to become as attractive as the innately preferred blue colour and the blue colour could be trained to become less attractive. This is the first proof of odour learning in a diurnal moth. The results show that M. stellatarum can use more than one modality in their foraging behaviour and that the system is plastic. By manipulating the preferences for the different colours, their influence on odour learning could be changed.

Postharvest shelf-life extension of pink guavas (Psidium guajava L.) using HPMC-based edible surface coatings.

PubMed

Vishwasrao, Chandrahas; Ananthanarayan, Laxmi

2016-04-01

Psidium guajava L. var. 'Lalit' is a perishable fruit with delicate skin which is prone to damage. The objective of this study was to determine the effect of edible coating made up of hydroxypropyl methyl cellulose and palm oil on ripening of guava. Coating solution was applied over fruits and coated fruits were stored at 24 ± 1 °C and 65 ± 5%RH. Changes in fruit colour, texture softening, respiration rate, weight loss, ascorbic acid content, soluble solids, titrable acidity, chlorophyll content, total reducing sugars, total phenolic content were studied during post-harvest ripening. Fruits coated with 1 % of hydroxypropyl methyl cellulose and 0.3 % of palm oil showed significant delay in weight loss, fruit firmness as well as colour change (p < 0.05). Coating delayed the enzyme activities of peroxidase and polyphenol oxidase of the fruit. Results suggest that overall quality of coated fruit was maintained by edible coating formulation extending the shelf life of fruit up to 12 days with appreciable retention of all quality parameters tested.

Classification of pre-sliced pork and Turkey ham qualities based on image colour and textural features and their relationships with consumer responses.

PubMed

Iqbal, Abdullah; Valous, Nektarios A; Mendoza, Fernando; Sun, Da-Wen; Allen, Paul

2010-03-01

Images of three qualities of pre-sliced pork and Turkey hams were evaluated for colour and textural features to characterize and classify them, and to model the ham appearance grading and preference responses of a group of consumers. A total of 26 colour features and 40 textural features were extracted for analysis. Using Mahalanobis distance and feature inter-correlation analyses, two best colour [mean of S (saturation in HSV colour space), std. deviation of b*, which indicates blue to yellow in L*a*b* colour space] and three textural features [entropy of b*, contrast of H (hue of HSV colour space), entropy of R (red of RGB colour space)] for pork, and three colour (mean of R, mean of H, std. deviation of a*, which indicates green to red in L*a*b* colour space) and two textural features [contrast of B, contrast of L* (luminance or lightness in L*a*b* colour space)] for Turkey hams were selected as features with the highest discriminant power. High classification performances were reached for both types of hams (>99.5% for pork and >90.5% for Turkey) using the best selected features or combinations of them. In spite of the poor/fair agreement among ham consumers as determined by Kappa analysis (Kappa-value<0.4) for sensory grading (surface colour, colour uniformity, bitonality, texture appearance and acceptability), a dichotomous logistic regression model using the best image features was able to explain the variability of consumers' responses for all sensorial attributes with accuracies higher than 74.1% for pork hams and 83.3% for Turkey hams. Copyright 2009 Elsevier Ltd. All rights reserved.

Type of packaging affects the colour stability of vitamin E enriched beef.

PubMed

Nassu, Renata T; Uttaro, Bethany; Aalhus, Jennifer L; Zawadski, Sophie; Juárez, Manuel; Dugan, Michael E R

2012-12-01

Colour stability is a very important parameter for meat retail display, as appearance of the product is the deciding factor for consumers at time of purchase. This study investigated the possibility of extending appearance shelf-life through the combined use of packaging method (overwrapping - OVER, modified atmosphere - MAP, vacuum skin packaging - VSP and a combination of modified atmosphere and vacuum skin packaging - MAPVSP) and antioxidants (vitamin E enriched beef). Retail attributes (appearance, lean colour, % surface discolouration), as well as colour space analysis of images for red, green and blue parameters were measured over 18days. MAPVSP provided the most desirable retail appearance during the first 4days of retail display, while VSP-HB had the best colour stability. Overall, packaging type was more influential than α-tocopherol levels on meat colour stability, although α-tocopherol levels (>4μgg(-1) meat) had a protective effect when using high oxygen packaging methods. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Spectral response data for development of cool coloured tile coverings

NASA Astrophysics Data System (ADS)

Libbra, Antonio; Tarozzi, Luca; Muscio, Alberto; Corticelli, Mauro A.

2011-03-01

Most ancient or traditional buildings in Italy show steep-slope roofs covered by red clay tiles. As the rooms immediately below the roof are often inhabited in historical or densely urbanized centres, the combination of low solar reflectance of tile coverings and low thermal inertia of either wooden roof structures or sub-tile insulation panels makes summer overheating a major problem. The problem can be mitigated by using tiles coated with cool colours, that is colours with the same spectral response of clay tiles in the visible, but highly reflecting in the near infrared range, which includes more than half of solar radiation. Cool colours can yield the same visible aspect of common building surfaces, but higher solar reflectance. Studies aimed at developing cool colour tile coverings for traditional Italian buildings have been started. A few coating solutions with the typical red terracotta colour have been produced and tested in the laboratory, using easily available materials. The spectral response and the solar reflectance have been measured and compared with that of standard tiles.

TNO Photometry and Spectroscopy at ESO and Calar Alto

NASA Astrophysics Data System (ADS)

Boehnhardt, H.; Sekiguchi, T.; Vair, M.; Hainaut, O.; Delahodde, C.; West, R. M.; Tozzi, G. P.; Barrera, L.; Birkle, K.; Watanabe, J.; Meech, K.

New photometry and spectroscopy of Transneptunian objects (TNO) has been obtained at ESO (VLT+FORS1, NTT+SOFI) and the Calar Alto (3.5m+MOSCA) observatory. BVRI photometry of more than 10 objects confirms the general colour-colour distribution of TNOs found previously. Quasi-simultaneous spectroscopy in the visible wavelength range of 5 TNOs did not reveal any spectral signature apart from the spetral gradients which are in agreement with the broadband colours. JHK filter photometry of 3 objects indicates that the reddening may only occur in the near-IR at least in some cases. Using new observations from the ESO VLT the lightcurve, colours and spectrum of 1996TO66 are investigated: the rotation period of 6.25h is confirmed, also the change in the lightcurve between 1997 and 1998 which indicates an exceptional behaviour in this object (temporary cometary activity ?). The 1999 photometry and spectroscopy in the visible revealed solar colours, no reddening and no spectral features. V-R colour changes over the rotation phase are not found. This works is done in colaboration with:

Figure ground segregation modulates perceived direction of ambiguous moving gratings and plaids.

PubMed

Tommasi, L; Vallortigara, G

1999-02-01

A translating oriented grating viewed through a circular aperture with an occluding area in the middle appeared to move alternately in an oblique or in a vertical direction depending on the foreground/background assignment on the central occluding area. The effect occurred even when the central area was simply removed from the display, thus giving rise to a 'subjective' occluder. Parametric studies revealed that the probability of seeing oblique or vertical motion was affected by the size of the central area but not by its contrast relationships with the grating. Similar phenomena of ambiguous motion direction were observed using changes in colour along a translating grating that produced neon colour spreading effects, or using oriented edge discontinuities that collapsed into subjective plaids composed of two one-dimensional gratings. These results are discussed with respect to the hypothesis that surface segmentation mechanisms play a crucial part in the interpretation of motion signals.

Global Interior Robot Localisation by a Colour Content Image Retrieval System

NASA Astrophysics Data System (ADS)

Chaari, A.; Lelandais, S.; Montagne, C.; Ahmed, M. Ben

2007-12-01

We propose a new global localisation approach to determine a coarse position of a mobile robot in structured indoor space using colour-based image retrieval techniques. We use an original method of colour quantisation based on the baker's transformation to extract a two-dimensional colour pallet combining as well space and vicinity-related information as colourimetric aspect of the original image. We conceive several retrieving approaches bringing to a specific similarity measure [InlineEquation not available: see fulltext.] integrating the space organisation of colours in the pallet. The baker's transformation provides a quantisation of the image into a space where colours that are nearby in the original space are also nearby in the output space, thereby providing dimensionality reduction and invariance to minor changes in the image. Whereas the distance [InlineEquation not available: see fulltext.] provides for partial invariance to translation, sight point small changes, and scale factor. In addition to this study, we developed a hierarchical search module based on the logic classification of images following rooms. This hierarchical module reduces the searching indoor space and ensures an improvement of our system performances. Results are then compared with those brought by colour histograms provided with several similarity measures. In this paper, we focus on colour-based features to describe indoor images. A finalised system must obviously integrate other type of signature like shape and texture.

Physicochemical and physiological basis of dichromatic colour

NASA Astrophysics Data System (ADS)

Kreft, Samo; Kreft, Marko

2007-11-01

Out of three perceptual characteristics of the colour of any substance, the hue depends mostly on the spectral properties of a substance, while the brightness and saturation depend also on the concentration of a substance and its thickness. Here, we report that evident change of the hue of the colour (i.e., from green to red) is due to a change in concentration or the thickness of a layer in some exceptional substances such as pumpkin seed oil or an aqueous solution of bromophenol blue. In some regions of Central Europe, salad dressing is made preferably with the pumpkin seed oil, which has a strong characteristic nut-like taste and remarkable properties of the colour: it appears red in a bottle, but green when served as a salad dressing. The colour of the pumpkin seed oil was previously described as brownish yellow, dark green, dark green to red ochre or dark reddish brown to light yellow green. We elucidated the physicochemical and physiological basis of such dichromatism by Beer-Lambert law and by the characteristics of human colour perception. Our concept was corroborated by the outcome of calculations of colour from spectral properties using colour matching functions. We found that dichromatism is observed if the absorption spectrum of any substance has at least two local minima: one wide but shallow and one narrow but deep local minimum.

Cyclic Colour Change in the Bearded Dragon Pogona vitticeps under Different Photoperiods

PubMed Central

Fan, Marie; Stuart-Fox, Devi; Cadena, Viviana

2014-01-01

The ability to change colour rapidly is widespread among ectotherms and has various functions including camouflage, communication and thermoregulation. The process of colour change can occur as an aperiodic event or be rhythmic, induced by cyclic environmental factors or regulated by internal oscillators. Despite the importance of colour change in reptile ecology, few studies have investigated the occurrence of a circadian rhythm in lizard pigmentation. Additionally, although colour change also entails changes in near-infrared reflectance, which may affect thermoregulation, little research has examined this part of the spectrum. We tested whether the bearded dragon lizard, Pogona vitticeps, displays an endogenous circadian rhythm in pigmentation changes that could be entrained by light/dark (LD) cycles and how light affected the relative change in reflectance in both ultraviolet-visible and near-infrared spectra. We subjected 11 lizards to four photoperiodic regimens: LD 12∶12; LD 6∶18; LD 18∶6 and DD; and measured their dorsal skin reflectance at 3-hour intervals for 72 hours after a habituation period. A proportion of lizards displayed a significant rhythm under constant darkness, with maximum reflectance occurring in the subjective night. This endogenous rhythm synchronised to the different artificial LD cycles, with maximum reflectance occurring during dark phases, but did not vary in amplitude. In addition, the total ultraviolet-visible reflectance in relation to the total near-infrared reflectance was significantly higher during dark phases than during light phases. We conclude that P. vitticeps exhibits a circadian pigmentation rhythm of constant amplitude, regulated by internal oscillators and that can be entrained by light/dark cycles. PMID:25354192

Cyclic colour change in the bearded dragon Pogona vitticeps under different photoperiods.

PubMed

Fan, Marie; Stuart-Fox, Devi; Cadena, Viviana

2014-01-01

The ability to change colour rapidly is widespread among ectotherms and has various functions including camouflage, communication and thermoregulation. The process of colour change can occur as an aperiodic event or be rhythmic, induced by cyclic environmental factors or regulated by internal oscillators. Despite the importance of colour change in reptile ecology, few studies have investigated the occurrence of a circadian rhythm in lizard pigmentation. Additionally, although colour change also entails changes in near-infrared reflectance, which may affect thermoregulation, little research has examined this part of the spectrum. We tested whether the bearded dragon lizard, Pogona vitticeps, displays an endogenous circadian rhythm in pigmentation changes that could be entrained by light/dark (LD) cycles and how light affected the relative change in reflectance in both ultraviolet-visible and near-infrared spectra. We subjected 11 lizards to four photoperiodic regimens: LD 12:12; LD 6:18; LD 18:6 and DD; and measured their dorsal skin reflectance at 3-hour intervals for 72 hours after a habituation period. A proportion of lizards displayed a significant rhythm under constant darkness, with maximum reflectance occurring in the subjective night. This endogenous rhythm synchronised to the different artificial LD cycles, with maximum reflectance occurring during dark phases, but did not vary in amplitude. In addition, the total ultraviolet-visible reflectance in relation to the total near-infrared reflectance was significantly higher during dark phases than during light phases. We conclude that P. vitticeps exhibits a circadian pigmentation rhythm of constant amplitude, regulated by internal oscillators and that can be entrained by light/dark cycles.

Spatial and temporal aspects of chromatic adaptation and their functional significance for colour constancy.

PubMed

Werner, Annette

2014-11-01

Illumination in natural scenes changes at multiple temporal and spatial scales: slow changes in global illumination occur in the course of a day, and we encounter fast and localised illumination changes when visually exploring the non-uniform light field of three-dimensional scenes; in addition, very long-term chromatic variations may come from the environment, like for example seasonal changes. In this context, I consider the temporal and spatial properties of chromatic adaptation and discuss their functional significance for colour constancy in three-dimensional scenes. A process of fast spatial tuning in chromatic adaptation is proposed as a possible sensory mechanism for linking colour constancy to the spatial structure of a scene. The observed middlewavelength selectivity of this process is particularly suitable for adaptation to the mean chromaticity and the compensation of interreflections in natural scenes. Two types of sensory colour constancy are distinguished, based on the functional differences of their temporal and spatial scales: a slow type, operating at a global scale for the compensation of the ambient illumination; and a fast colour constancy, which is locally restricted and well suited to compensate region-specific variations in the light field of three dimensional scenes. Copyright © 2014 Elsevier B.V. All rights reserved.

Cross-modal associations in synaesthesia: Vowel colours in the ear of the beholder

PubMed Central

Moos, Anja; Smith, Rachel; Miller, Sam R.; Simmons, David R.

2014-01-01

Human speech conveys many forms of information, but for some exceptional individuals (synaesthetes), listening to speech sounds can automatically induce visual percepts such as colours. In this experiment, grapheme–colour synaesthetes and controls were asked to assign colours, or shades of grey, to different vowel sounds. We then investigated whether the acoustic content of these vowel sounds influenced participants' colour and grey-shade choices. We found that both colour and grey-shade associations varied systematically with vowel changes. The colour effect was significant for both participant groups, but significantly stronger and more consistent for synaesthetes. Because not all vowel sounds that we used are “translatable” into graphemes, we conclude that acoustic–phonetic influences co-exist with established graphemic influences in the cross-modal correspondences of both synaesthetes and non-synaesthetes. PMID:25469218

Is the 'blue' colour convention for inhaled reliever medications important? A UK-based survey of healthcare professionals and patients with airways disease.

PubMed

Fletcher, Monica; Scullion, Jane; White, John; Thompson, Bronwen; Capstick, Toby

2016-11-03

In many countries, short-acting β 2 -agonist inhalers have traditionally been coloured blue. This inhaled therapy has also conventionally been known as a 'reliever' by patients and healthcare professionals (HCPs), in comparison with 'preventer' medications (inhaled steroids). With the rapidly changing market in inhaled therapy for COPD and asthma and growing numbers of devices, there has been some concern that the erosion of traditional colour conventions is leading to patients (and HCPs) becoming confused about the role of different therapies. In order to assess whether there was concern over the perceived changing colour conventions, the UK Inhaler Group carried out a large online survey of patients and HCPs. The aim was to determine how patients and HCPS identify and describe inhaled drugs, and how this might impact on use of medicines and safety. The results of the survey highlighted the importance of the term 'blue inhaler' for patients with only 11.3% never referring to the colour when referring to their inhaler. For HCPs, 95% felt colour conventions were important when referring to reliever medication. In addition, HCPs appear to refer to inhalers mainly by colour when talking to patients. Our conclusions were that the concept of a 'blue inhaler' remains important to patients and healthcare professionals. These results add to the debate about the need to formalise the colour coding of inhaled therapies, in particular using the colour blue for inhalers for rapid relief of symptoms, as this convention may be an important measure and contributor to patient safety. Our survey should provide impetus for all interested parties to discuss and agree a formal industry-wide approach to colour coding of inhaled therapies for the benefit of patients and carers and HCPs.

White Electroluminescence Using ZnO Nanotubes/GaN Heterostructure Light-Emitting Diode

PubMed Central

2010-01-01

We report the fabrication of heterostructure white light–emitting diode (LED) comprised of n-ZnO nanotubes (NTs) aqueous chemically synthesized on p-GaN substrate. Room temperature electroluminescence (EL) of the LED demonstrates strong broadband white emission spectrum consisting of predominating peak centred at 560 nm and relatively weak violet–blue emission peak at 450 nm under forward bias. The broadband EL emission covering the whole visible spectrum has been attributed to the large surface area and high surface states of ZnO NTs produced during the etching process. In addition, comparison of the EL emission colour quality shows that ZnO nanotubes have much better quality than that of the ZnO nanorods. The colour-rendering index of the white light obtained from the nanotubes was 87, while the nanorods-based LED emit yellowish colour. PMID:20672120

Production of colourful pigments consisting of amorphous arrays of silica particles.

PubMed

Yoshioka, Shinya; Takeoka, Yukikazu

2014-08-04

It is desirable to produce colourful pigments that have anti-fading properties and are environmentally friendly. In this Concept, we describe recently developed pigments that exhibit such characteristics. The pigments consist of amorphous arrays of submicron silica particles, and they exhibit saturated and angle-independent structural colours. Variously coloured pigments can be produced by changing the size of the particles, and the saturation of the colour can be controlled by incorporating small amounts of black particles. We review a simple analysis that is useful for interpreting the angular independence of the structural colours and discuss the remaining tasks that must be accomplished for the realistic application of these pigments. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

LASER APPLICATIONS AND OTHER TOPICS IN QUANTUM ELECTRONICS: Application of two-colour pyrometry for measuring the surface temperature of a body activated by laser pulses

NASA Astrophysics Data System (ADS)

Kirillov, V. M.; Skvortsov, L. A.

2006-08-01

The features of contactless measurements of the surface temperature of bodies by the method of two-colour pyrometry of samples activated by periodic laser pulses are considered. The requirements imposed on the parameters of laser radiation and a measuring circuit are formulated. It is shown experimentally that surface temperatures close to room temperature can be measured with an error not exceeding 3% after elimination of the superfluous static component of the excess temperature. The sensitivity of the method is estimated. Advantages of laser photothermal radiometry with repetitively pulsed excitation of surfaces over the case when samples are subjected to harmonic amplitude-modulated laser radiation are discussed.

Varieties of grapheme-colour synaesthesia: a new theory of phenomenological and behavioural differences.

PubMed

Ward, Jamie; Li, Ryan; Salih, Shireen; Sagiv, Noam

2007-12-01

Recent research has suggested that not all grapheme-colour synaesthetes are alike. One suggestion is that they can be divided, phenomenologically, in terms of whether the colours are experienced in external or internal space (projector-associator distinction). Another suggestion is that they can be divided according to whether it is the perceptual or conceptual attributes of a stimulus that is critical (higher-lower distinction). This study compares the behavioural performance of 7 projector and 7 associator synaesthetes. We demonstrate that this distinction does not map on to behavioural traits expected from the higher-lower distinction. We replicate previous research showing that projectors are faster at naming their synaesthetic colours than veridical colours, and that associators show the reverse profile. Synaesthetes who project colours into external space but not on to the surface of the grapheme behave like associators on this task. In a second task, graphemes presented briefly in the periphery are more likely to elicit reports of colour in projectors than associators, but the colours only tend to be accurate when the grapheme itself is also accurately identified. We propose an alternative model of individual differences in grapheme-colour synaesthesia that emphasises the role of different spatial reference frames in synaesthetic perception. In doing so, we attempt to bring the synaesthesia literature closer to current models of non-synaesthetic perception, attention and binding.

Intrinsic melanin and hemoglobin colour components for skin lesion malignancy detection.

PubMed

Madooei, Ali; Drew, Mark S; Sadeghi, Maryam; Atkins, M Stella

2012-01-01

In this paper we propose a new log-chromaticity 2-D colour space, an extension of previous approaches, which succeeds in removing confounding factors from dermoscopic images: (i) the effects of the particular camera characteristics for the camera system used in forming RGB images; (ii) the colour of the light used in the dermoscope; (iii) shading induced by imaging non-flat skin surfaces; (iv) and light intensity, removing the effect of light-intensity falloff toward the edges of the dermoscopic image. In the context of a blind source separation of the underlying colour, we arrive at intrinsic melanin and hemoglobin images, whose properties are then used in supervised learning to achieve excellent malignant vs. benign skin lesion classification. In addition, we propose using the geometric-mean of colour for skin lesion segmentation based on simple grey-level thresholding, with results outperforming the state of the art.

Colour for Behavioural Success.

PubMed

Dresp-Langley, Birgitta; Reeves, Adam

2018-01-01

Colour information not only helps sustain the survival of animal species by guiding sexual selection and foraging behaviour but also is an important factor in the cultural and technological development of our own species. This is illustrated by examples from the visual arts and from state-of-the-art imaging technology, where the strategic use of colour has become a powerful tool for guiding the planning and execution of interventional procedures. The functional role of colour information in terms of its potential benefits to behavioural success across the species is addressed in the introduction here to clarify why colour perception may have evolved to generate behavioural success. It is argued that evolutionary and environmental pressures influence not only colour trait production in the different species but also their ability to process and exploit colour information for goal-specific purposes. We then leap straight to the human primate with insight from current research on the facilitating role of colour cues on performance training with precision technology for image-guided surgical planning and intervention. It is shown that local colour cues in two-dimensional images generated by a surgical fisheye camera help individuals become more precise rapidly across a limited number of trial sets in simulator training for specific manual gestures with a tool. This facilitating effect of a local colour cue on performance evolution in a video-controlled simulator (pick-and-place) task can be explained in terms of colour-based figure-ground segregation facilitating attention to local image parts when more than two layers of subjective surface depth are present, as in all natural and surgical images.

Colour for Behavioural Success

PubMed Central

Reeves, Adam

2018-01-01

Colour information not only helps sustain the survival of animal species by guiding sexual selection and foraging behaviour but also is an important factor in the cultural and technological development of our own species. This is illustrated by examples from the visual arts and from state-of-the-art imaging technology, where the strategic use of colour has become a powerful tool for guiding the planning and execution of interventional procedures. The functional role of colour information in terms of its potential benefits to behavioural success across the species is addressed in the introduction here to clarify why colour perception may have evolved to generate behavioural success. It is argued that evolutionary and environmental pressures influence not only colour trait production in the different species but also their ability to process and exploit colour information for goal-specific purposes. We then leap straight to the human primate with insight from current research on the facilitating role of colour cues on performance training with precision technology for image-guided surgical planning and intervention. It is shown that local colour cues in two-dimensional images generated by a surgical fisheye camera help individuals become more precise rapidly across a limited number of trial sets in simulator training for specific manual gestures with a tool. This facilitating effect of a local colour cue on performance evolution in a video-controlled simulator (pick-and-place) task can be explained in terms of colour-based figure-ground segregation facilitating attention to local image parts when more than two layers of subjective surface depth are present, as in all natural and surgical images. PMID:29770183

Modulation of population density and size of silver nanoparticles embedded in bacterial cellulose via ammonia exposure: visual detection of volatile compounds in a piece of plasmonic nanopaper

NASA Astrophysics Data System (ADS)

Heli, B.; Morales-Narváez, E.; Golmohammadi, H.; Ajji, A.; Merkoçi, A.

2016-04-01

The localized surface plasmon resonance exhibited by noble metal nanoparticles can be sensitively tuned by varying their size and interparticle distances. We report that corrosive vapour (ammonia) exposure dramatically reduces the population density of silver nanoparticles (AgNPs) embedded within bacterial cellulose, leading to a larger distance between the remaining nanoparticles and a decrease in the UV-Vis absorbance associated with the AgNP plasmonic properties. We also found that the size distribution of AgNPs embedded in bacterial cellulose undergoes a reduction in the presence of volatile compounds released during food spoilage, modulating the studied nanoplasmonic properties. In fact, such a plasmonic nanopaper exhibits a change in colour from amber to light amber upon the explored corrosive vapour exposure and from amber to a grey or taupe colour upon fish or meat spoilage exposure. These phenomena are proposed as a simple visual detection of volatile compounds in a flexible, transparent, permeable and stable single-use nanoplasmonic membrane, which opens the way to innovative approaches and capabilities in gas sensing and smart packaging.The localized surface plasmon resonance exhibited by noble metal nanoparticles can be sensitively tuned by varying their size and interparticle distances. We report that corrosive vapour (ammonia) exposure dramatically reduces the population density of silver nanoparticles (AgNPs) embedded within bacterial cellulose, leading to a larger distance between the remaining nanoparticles and a decrease in the UV-Vis absorbance associated with the AgNP plasmonic properties. We also found that the size distribution of AgNPs embedded in bacterial cellulose undergoes a reduction in the presence of volatile compounds released during food spoilage, modulating the studied nanoplasmonic properties. In fact, such a plasmonic nanopaper exhibits a change in colour from amber to light amber upon the explored corrosive vapour exposure and from amber to a grey or taupe colour upon fish or meat spoilage exposure. These phenomena are proposed as a simple visual detection of volatile compounds in a flexible, transparent, permeable and stable single-use nanoplasmonic membrane, which opens the way to innovative approaches and capabilities in gas sensing and smart packaging. Electronic supplementary information (ESI) available: Details on the estimations of evaporation rates and limits of detection, ESI figures and author contributions. See DOI: 10.1039/c6nr00537c

Application of response surface methodology for studying the product characteristics of extruded rice-cowpea-groundnut blends.

PubMed

Asare, Emmanuel Kwasi; Sefa-Dedeh, Samuel; Sakyi-Dawson, Esther; Afoakwa, Emmanuel Ohene

2004-08-01

Response surface methodology (with central composite rotatable design for k=3) was used to investigate the product properties of extruded rice-cowpea-groundnut blends in a single screw extruder. The combined effect of cowpea (0-20%), groundnut (0-10%), and feed moisture (14-48%) levels were used for formulation of the products. The product moisture, expansion ratio, bulk density and total colour change were studied using standard analytical methods. Well-expanded rice-legume blend extrudates of less bulk density and lower moisture content were produced at low feed moisture. Increasing legume addition affected the various shades of colour in the product. Models developed for the indices gave R(2) values ranging from 52.8% (for the b-value) to 86.5% (for bulk density). The models developed suggested that the optimal process variables for the production of a puffed snack with an enhanced nutrition and spongy structure from a rice-cowpea-groundnut blend are low feed moisture of 14-20% and maximum additions of 20% cowpea and 10% groundnut. A lack-of-fit test showed no significance, indicating that the models adequately fitted the data.

Seasonal skin colour changes in a sample teenage population measured by reflection spectrophotometry

NASA Astrophysics Data System (ADS)

Stringer, M. R.; Cruse-Sawyer, J. E.

2007-11-01

As part of a classroom-based research project, reflectance spectra from the skin of a group of teenage school students were recorded over a four-month period, from early spring to mid-summer. The relative changes in skin colour during the course of the study were quantified by integrating over the full wavelength range of the normalized reflectance spectra. Measurements made upon the inner forearm and the back of the hand produce results which indicate a decrease in total reflectance (increase in absorption) corresponding to different levels of tanning for limited and extended exposure to ambient sunlight, respectively. The rate of change of skin colour qualitatively matches that of the solar illuminance.

NICE: A Computational Solution to Close the Gap from Colour Perception to Colour Categorization

PubMed Central

Parraga, C. Alejandro; Akbarinia, Arash

2016-01-01

The segmentation of visible electromagnetic radiation into chromatic categories by the human visual system has been extensively studied from a perceptual point of view, resulting in several colour appearance models. However, there is currently a void when it comes to relate these results to the physiological mechanisms that are known to shape the pre-cortical and cortical visual pathway. This work intends to begin to fill this void by proposing a new physiologically plausible model of colour categorization based on Neural Isoresponsive Colour Ellipsoids (NICE) in the cone-contrast space defined by the main directions of the visual signals entering the visual cortex. The model was adjusted to fit psychophysical measures that concentrate on the categorical boundaries and are consistent with the ellipsoidal isoresponse surfaces of visual cortical neurons. By revealing the shape of such categorical colour regions, our measures allow for a more precise and parsimonious description, connecting well-known early visual processing mechanisms to the less understood phenomenon of colour categorization. To test the feasibility of our method we applied it to exemplary images and a popular ground-truth chart obtaining labelling results that are better than those of current state-of-the-art algorithms. PMID:26954691

NICE: A Computational Solution to Close the Gap from Colour Perception to Colour Categorization.

PubMed

Parraga, C Alejandro; Akbarinia, Arash

2016-01-01

The segmentation of visible electromagnetic radiation into chromatic categories by the human visual system has been extensively studied from a perceptual point of view, resulting in several colour appearance models. However, there is currently a void when it comes to relate these results to the physiological mechanisms that are known to shape the pre-cortical and cortical visual pathway. This work intends to begin to fill this void by proposing a new physiologically plausible model of colour categorization based on Neural Isoresponsive Colour Ellipsoids (NICE) in the cone-contrast space defined by the main directions of the visual signals entering the visual cortex. The model was adjusted to fit psychophysical measures that concentrate on the categorical boundaries and are consistent with the ellipsoidal isoresponse surfaces of visual cortical neurons. By revealing the shape of such categorical colour regions, our measures allow for a more precise and parsimonious description, connecting well-known early visual processing mechanisms to the less understood phenomenon of colour categorization. To test the feasibility of our method we applied it to exemplary images and a popular ground-truth chart obtaining labelling results that are better than those of current state-of-the-art algorithms.

Gloss, colour and grip: multifunctional epidermal cell shapes in bee- and bird-pollinated flowers.

PubMed

Papiorek, Sarah; Junker, Robert R; Lunau, Klaus

2014-01-01

Flowers bear the function of filters supporting the attraction of pollinators as well as the deterrence of floral antagonists. The effect of epidermal cell shape on the visual display and tactile properties of flowers has been evaluated only recently. In this study we quantitatively measured epidermal cell shape, gloss and spectral reflectance of flowers pollinated by either bees or birds testing three hypotheses: The first two hypotheses imply that bee-pollinated flowers might benefit from rough surfaces on visually-active parts produced by conical epidermal cells, as they may enhance the colour signal of flowers as well as the grip on flowers for bees. In contrast, bird-pollinated flowers might benefit from flat surfaces produced by flat epidermal cells, by avoiding frequent visitation from non-pollinating bees due to a reduced colour signal, as birds do not rely on specific colour parameters while foraging. Moreover, flat petal surfaces in bird-pollinated flowers may hamper grip for bees that do not touch anthers and stigmas while consuming nectar and thus, are considered as nectar thieves. Beside this, the third hypothesis implies that those flower parts which are vulnerable to nectar robbing of bee- as well as bird-pollinated flowers benefit from flat epidermal cells, hampering grip for nectar robbing bees. Our comparative data show in fact that conical epidermal cells are restricted to visually-active parts of bee-pollinated flowers, whereas robbing-sensitive parts of bee-pollinated as well as the entire floral surface of bird-pollinated flowers possess on average flat epidermal cells. However, direct correlations between epidermal cell shape and colour parameters have not been found. Our results together with published experimental studies show that epidermal cell shape as a largely neglected flower trait might act as an important feature in pollinator attraction and avoidance of antagonists, and thus may contribute to the partitioning of flower-visitors.

Evolution of colour vision in mammals.

PubMed

Jacobs, Gerald H

2009-10-12

Colour vision allows animals to reliably distinguish differences in the distributions of spectral energies reaching the eye. Although not universal, a capacity for colour vision is sufficiently widespread across the animal kingdom to provide prima facie evidence of its importance as a tool for analysing and interpreting the visual environment. The basic biological mechanisms on which vertebrate colour vision ultimately rests, the cone opsin genes and the photopigments they specify, are highly conserved. Within that constraint, however, the utilization of these basic elements varies in striking ways in that they appear, disappear and emerge in altered form during the course of evolution. These changes, along with other alterations in the visual system, have led to profound variations in the nature and salience of colour vision among the vertebrates. This article concerns the evolution of colour vision among the mammals, viewing that process in the context of relevant biological mechanisms, of variations in mammalian colour vision, and of the utility of colour vision.

Evolution of colour vision in mammals

PubMed Central

Jacobs, Gerald H.

2009-01-01

Colour vision allows animals to reliably distinguish differences in the distributions of spectral energies reaching the eye. Although not universal, a capacity for colour vision is sufficiently widespread across the animal kingdom to provide prima facie evidence of its importance as a tool for analysing and interpreting the visual environment. The basic biological mechanisms on which vertebrate colour vision ultimately rests, the cone opsin genes and the photopigments they specify, are highly conserved. Within that constraint, however, the utilization of these basic elements varies in striking ways in that they appear, disappear and emerge in altered form during the course of evolution. These changes, along with other alterations in the visual system, have led to profound variations in the nature and salience of colour vision among the vertebrates. This article concerns the evolution of colour vision among the mammals, viewing that process in the context of relevant biological mechanisms, of variations in mammalian colour vision, and of the utility of colour vision. PMID:19720656

A new simple concept for ocean colour remote sensing using parallel polarisation radiance

PubMed Central

He, Xianqiang; Pan, Delu; Bai, Yan; Wang, Difeng; Hao, Zengzhou

2014-01-01

Ocean colour remote sensing has supported research on subjects ranging from marine ecosystems to climate change for almost 35 years. However, as the framework for ocean colour remote sensing is based on the radiation intensity at the top-of-atmosphere (TOA), the polarisation of the radiation, which contains additional information on atmospheric and water optical properties, has largely been neglected. In this study, we propose a new simple concept to ocean colour remote sensing that uses parallel polarisation radiance (PPR) instead of the traditional radiation intensity. We use vector radiative transfer simulation and polarimetric satellite sensing data to demonstrate that using PPR has two significant advantages in that it effectively diminishes the sun glint contamination and enhances the ocean colour signal at the TOA. This concept may open new doors for ocean colour remote sensing. We suggest that the next generation of ocean colour sensors should measure PPR to enhance observational capability. PMID:24434904

Specific deficit of colour-colour short-term memory binding in sporadic and familial Alzheimer's disease.

PubMed

Parra, Mario A; Sala, Sergio Della; Abrahams, Sharon; Logie, Robert H; Méndez, Luis Guillermo; Lopera, Francisco

2011-06-01

Short-term memory binding of visual features which are processed across different dimensions (shape-colour) is impaired in sporadic Alzheimer's disease, familial Alzheimer's disease, and in asymptomatic carriers of familial Alzheimer's disease. This study investigated whether Alzheimer's disease also impacts on within-dimension binding processes. The study specifically explored whether visual short-term memory binding of features of the same type (colour-colour) is sensitive to Alzheimer's disease. We used a neuropsychological battery and a short-term memory binding task to assess patients with sporadic Alzheimer's disease (Experiment 1), familial Alzheimer's disease (Experiment 2) due to the mutation E280A of the Presenilin-1 gene and asymptomatic carriers of the mutation. The binding task assessed change detection within arrays of unicoloured objects (Colour Only) or bicoloured objects the colours of which had to be remembered separately (Unbound Colours) or together (Bound Colours). Performance on the Bound Colours condition (1) explained the largest proportion of variance between patients (sporadic and familial Alzheimer's disease), (2) combined more sensitivity and specificity for the disease than other more traditional neuropsychological tasks, (3) identified asymptomatic carriers of the mutation even when traditional neuropsychological measures and other measures of short-term memory did not and, (4) contrary to shape-colour binding, correlated with measures of hippocampal functions. Colour-colour binding and shape-colour binding both appear to be sensitive to AD even though they seem to rely on different brain mechanisms. Copyright © 2011 Elsevier Ltd. All rights reserved.

Colour analysis and verification of CCTV images under different lighting conditions

NASA Astrophysics Data System (ADS)

Smith, R. A.; MacLennan-Brown, K.; Tighe, J. F.; Cohen, N.; Triantaphillidou, S.; MacDonald, L. W.

2008-01-01

Colour information is not faithfully maintained by a CCTV imaging chain. Since colour can play an important role in identifying objects it is beneficial to be able to account accurately for changes to colour introduced by components in the chain. With this information it will be possible for law enforcement agencies and others to work back along the imaging chain to extract accurate colour information from CCTV recordings. A typical CCTV system has an imaging chain that may consist of scene, camera, compression, recording media and display. The response of each of these stages to colour scene information was characterised by measuring its response to a known input. The main variables that affect colour within a scene are illumination and the colour, orientation and texture of objects. The effects of illumination on the appearance of colour of a variety of test targets were tested using laboratory-based lighting, street lighting, car headlights and artificial daylight. A range of typical cameras used in CCTV applications, common compression schemes and representative displays were also characterised.

A review of tooth colour and whiteness.

PubMed

Joiner, Andrew; Hopkinson, Ian; Deng, Yan; Westland, Stephen

2008-01-01

To review current knowledge on the definition of tooth whiteness and its application within dentistry, together with the measured range of tooth colours. 'Medline' and 'ISI Web of Sciences' databases were searched electronically with key words tooth, teeth, colour, colour, white and whiteness. The application of colour science within dentistry has permitted the measurement of tooth colour in an objective way, with the most common colour space in current use being the CIELAB (Commission Internationale de l'Eclairage). Indeed, many investigators from a range of different countries have reported L*, a* and b* values for teeth measured in vivo using instrumental techniques such as spectrophotometers, colorimeters and image analysis of digital images. In general, these studies show a large range in L*, a* and b* values, but consistently show that there is a significant contribution of b* value or yellowness in natural tooth colour. Further developments in colour science have lead to the description of tooth whiteness and changes in tooth whiteness based on whiteness indices, with the most relevant and applicable being the WIO whiteness index, a modified version of the CIE whiteness index.

A multicolour graph as a complete topological invariant for \\Omega-stable flows without periodic trajectories on surfaces

NASA Astrophysics Data System (ADS)

Kruglov, V. E.; Malyshev, D. S.; Pochinka, O. V.

2018-01-01

Studying the dynamics of a flow on surfaces by partitioning the phase space into cells with the same limit behaviour of trajectories within a cell goes back to the classical papers of Andronov, Pontryagin, Leontovich and Maier. The types of cells (the number of which is finite) and how the cells adjoin one another completely determine the topological equivalence class of a flow with finitely many special trajectories. If one trajectory is chosen in every cell of a rough flow without periodic orbits, then the cells are partitioned into so-called triangular regions of the same type. A combinatorial description of such a partition gives rise to the three-colour Oshemkov-Sharko graph, the vertices of which correspond to the triangular regions, and the edges to separatrices connecting them. Oshemkov and Sharko proved that such flows are topologically equivalent if and only if the three-colour graphs of the flows are isomorphic, and described an algorithm of distinguishing three-colour graphs. But their algorithm is not efficient with respect to graph theory. In the present paper, we describe the dynamics of Ω-stable flows without periodic trajectories on surfaces in the language of four-colour graphs, present an efficient algorithm for distinguishing such graphs, and develop a realization of a flow from some abstract graph. Bibliography: 17 titles.

In-stem labelling allows visualization of DNA strand displacements by distinct fluorescent colour change.

PubMed

Barrois, Sebastian; Wagenknecht, Hans-Achim

2013-05-21

The combination of thiazole orange (TO) and thiazole red (TR) as an internal pair of fluorescent DNA base surrogates ("DNA traffic lights") allows us to follow at least two consecutive DNA strand displacements in real time through a distinct fluorescence colour change from green to red and vice versa.

The role of pollinators in maintaining variation in flower colour in the Rocky Mountain columbine, Aquilegia coerulea

PubMed Central

Thairu, Margaret W.; Brunet, Johanne

2015-01-01

Background and Aims Flower colour varies within and among populations of the Rocky Mountain columbine, Aquilegia coerulea, in conjunction with the abundance of its two major pollinators, hawkmoths and bumble-bees. This study seeks to understand whether the choice of flower colour by these major pollinators can help explain the variation in flower colour observed in A. coerulea populations. Methods Dual choice assays and experimental arrays of blue and white flowers were used to determine the preference of hawkmoths and bumble-bees for flower colour. A test was made to determine whether a differential preference for flower colour, with bumble-bees preferring blue and hawkmoths white flowers, could explain the variation in flower colour. Whether a single pollinator could maintain a flower colour polymorphism was examined by testing to see if preference for a flower colour varied between day and dusk for hawkmoths and whether bumble-bees preferred novel or rare flower colour morphs. Key Results Hawkmoths preferred blue flowers under both day and dusk light conditions. Naïve bumble-bees preferred blue flowers but quickly learned to forage randomly on the two colour morphs when similar rewards were presented in the flowers. Bees quickly learned to associate a flower colour with a pollen reward. Prior experience affected the choice of flower colour by bees, but they did not preferentially visit novel flower colours or rare or common colour morphs. Conclusions Differences in flower colour preference between the two major pollinators could not explain the variation in flower colour observed in A. coerulea. The preference of hawkmoths for flower colour did not change between day and dusk, and bumble-bees did not prefer a novel or a rare flower colour morph. The data therefore suggest that factors other than pollinators may be more likely to affect the flower colour variation observed in A. coerulea. PMID:25808657

Snowshoe hares display limited phenotypic plasticity to mismatch in seasonal camouflage

USGS Publications Warehouse

Zimova, Marketa; Mills, L. Scott; Lukacs, Paul M.; Mitchell, Michael S.

2014-01-01

As duration of snow cover decreases owing to climate change, species undergoing seasonal colour moults can become colour mismatched with their background. The immediate adaptive solution to this mismatch is phenotypic plasticity, either in phenology of seasonal colour moults or in behaviours that reduce mismatch or its consequences. We observed nearly 200 snowshoe hares across a wide range of snow conditions and two study sites in Montana, USA, and found minimal plasticity in response to mismatch between coat colour and background. We found that moult phenology varied between study sites, likely due to differences in photoperiod and climate, but was largely fixed within study sites with only minimal plasticity to snow conditions during the spring white-to-brown moult. We also found no evidence that hares modify their behaviour in response to colour mismatch. Hiding and fleeing behaviours and resting spot preference of hares were more affected by variables related to season, site and concealment by vegetation, than by colour mismatch. We conclude that plasticity in moult phenology and behaviours in snowshoe hares is insufficient for adaptation to camouflage mismatch, suggesting that any future adaptation to climate change will require natural selection on moult phenology or behaviour.

Sexual selection and genetic colour polymorphisms in animals.

PubMed

Wellenreuther, Maren; Svensson, Erik I; Hansson, Bengt

2014-11-01

Genetic colour polymorphisms are widespread across animals and often subjected to complex selection regimes. Traditionally, colour morphs were used as simple visual markers to measure allele frequency changes in nature, selection, population divergence and speciation. With advances in sequencing technology and analysis methods, several model systems are emerging where the molecular targets of selection are being described. Here, we discuss recent studies on the genetics of sexually selected colour polymorphisms, aiming at (i) reviewing the evidence of sexual selection on colour polymorphisms, (ii) highlighting the genetic architecture, molecular and developmental basis underlying phenotypic colour diversification and (iii) discuss how the maintenance of such polymorphisms might be facilitated or constrained by these. Studies of the genetic architecture of colour polymorphism point towards the importance of tight clustering of colour loci with other trait loci, such as in the case of inversions and supergene structures. Other interesting findings include linkage between colour loci and mate preferences or sex determination, and the role of introgression and regulatory variation in fuelling polymorphisms. We highlight that more studies are needed that explicitly integrate fitness consequences of sexual selection on colour with the underlying molecular targets of colour to gain insights into the evolutionary consequences of sexual selection on polymorphism maintenance. © 2014 John Wiley & Sons Ltd.

Changes in the colour of light cue circadian activity.

PubMed

Pauers, Michael J; Kuchenbecker, James A; Neitz, Maureen; Neitz, Jay

2012-05-01

The discovery of melanopsin, the non-visual opsin present in intrinsically photosensitive retinal ganglion cells (ipRGCs), has created great excitement in the field of circadian biology. Now, researchers have emphasized melanopsin as the main photopigment governing circadian activity in vertebrates. Circadian biologists have tested this idea under standard laboratory, 12h Light: 12h Dark, lighting conditions that lack the dramatic daily colour changes of natural skylight. Here we used a stimulus paradigm in which the colour of the illumination changed throughout the day, thus mimicking natural skylight, but luminance, sensed intrinsically by melanopsin containing ganglion cells, was kept constant. We show in two species of cichlid, Aequidens pulcher and Labeotropheus fuelleborni, that changes in light colour, not intensity, are the primary determinants of natural circadian activity. Moreover, opponent-cone photoreceptor inputs to ipRGCs mediate the sensation of wavelength change, and not the intrinsic photopigment, melanopsin. These results have implications for understanding the evolutionary biology of non-visual photosensory pathways and answer long-standing questions about the nature and distribution of photopigments in organisms, including providing a solution to the mystery of why nocturnal animals routinely have mutations that interrupt the function of their short wavelength sensitive photopigment gene.

Changes in the colour of light cue circadian activity

PubMed Central

Kuchenbecker, James A.; Neitz, Maureen

2012-01-01

The discovery of melanopsin, the non-visual opsin present in intrinsically photosensitive retinal ganglion cells (ipRGCs), has created great excitement in the field of circadian biology. Now, researchers have emphasized melanopsin as the main photopigment governing circadian activity in vertebrates. Circadian biologists have tested this idea under standard laboratory, 12h Light: 12h Dark, lighting conditions that lack the dramatic daily colour changes of natural skylight. Here we used a stimulus paradigm in which the colour of the illumination changed throughout the day, thus mimicking natural skylight, but luminance, sensed intrinsically by melanopsin containing ganglion cells, was kept constant. We show in two species of cichlid, Aequidens pulcher and Labeotropheus fuelleborni, that changes in light colour, not intensity, are the primary determinants of natural circadian activity. Moreover, opponent-cone photoreceptor inputs to ipRGCs mediate the sensation of wavelength change, and not the intrinsic photopigment, melanopsin. These results have implications for understanding the evolutionary biology of non-visual photosensory pathways and answer long-standing questions about the nature and distribution of photopigments in organisms, including providing a solution to the mystery of why nocturnal animals routinely have mutations that interrupt the function of their short wavelength sensitive photopigment gene. PMID:22639465

Wall paintings studied using Raman spectroscopy: a comparative study between various assays of cross sections and external layers.

PubMed

Perez-Rodriguez, Jose Luis; Robador, Maria Dolores; Centeno, Miguel Angel; Siguenza, Belinda; Duran, Adrian

2014-01-01

This work describes a comparative study between in situ applications of portable Raman spectroscopy and direct laboratory measurements using micro-Raman spectroscopy on the surface of small samples and of cross sections. The study was performed using wall paintings from different sites of the Alcazar of Seville. Little information was obtained using a portable Raman spectrometer due to the presence of an acrylic polymer, calcium oxalate, calcite and gypsum that was formed or deposited on the surface. The pigments responsible for different colours, except cinnabar, were not detected by the micro-Raman spectroscopy study of the surface of small samples taken from the wall paintings due to the presence of surface contaminants. The pigments and plaster were characterised using cross sections. The black colour consisted of carbon black. The red layers were formed by cinnabar and white lead or by iron oxides. The green and white colours were composed of green emerald or atacamite and calcite, respectively. Pb3O4 has also been characterised. The white layers (plaster) located under the colour layers consisted of calcite, quartz and feldspars. The fresco technique was used to create the wall paintings. A wall painting located on a gypsum layer was also studied. The Naples yellow in this wall painting was not characterised due to the presence of glue and oils. This study showed the advantage of studying cross sections to completely characterise the pigments and plaster in the studied wall paintings. Copyright © 2013 Elsevier B.V. All rights reserved.

Purple anthocyanin colouration on lower (abaxial) leaf surface of Hemigraphis colorata (Acanthaceae)

PubMed Central

Skaar, Irene; Adaku, Christopher; Jordheim, Monica; Byamukama, Robert; Kiremire, Bernard; Andersen, Øyvind M.

2014-01-01

The functional significance of anthocyanin colouration of lower (abaxial) leaf surfaces is not clear. Two anthocyanins, 5-O-methylcyanidin 3-O-(3″-(β-glucuronopyranosyl)-β-glucopyranoside) (1) and 5-O-methylcyanidin 3-O-β-glucopyranoside (2), were isolated from Hemigraphis colorata (Blume) (Acanthaceae) leaves with strong purple abaxial colouration (2.2 and 0.6 mg/g fr. wt., respectively). The glycosyl moiety of 1, the disaccharide 3″-(β-glucuronopyranosyl)-β-glucopyranoside), has previously been reported to occur only in a triterpenoid saponin, lindernioside A. The structural assignment of the aglycone of 1 and 2 is the first complete characterisation of a natural 7-hydroxy-5-methoxyanthocyanidin. Compared to nearly all naturally occurring anthocyanidins, the 5-O-methylation of this anthocyanidin limits the type of possible quinoidal forms of 1 and 2 to be those forms with keto-function in only their 7- and 4′-positions. PMID:24957301

The role of enamel thickness and refractive index on human tooth colour.

PubMed

Oguro, Rena; Nakajima, Masatoshi; Seki, Naoko; Sadr, Alireza; Tagami, Junji; Sumi, Yasunori

2016-08-01

To investigate the role of enamel thickness and refractive index (n) on tooth colour. The colour and enamel thickness of fifteen extracted human central incisors were determined according to CIELab colour scale using spectrophotometer (Crystaleye) and swept-source optical coherence tomography (SS-OCT), respectively. Subsequently, labial enamel was trimmed by approximately 100μm, and the colour and remaining enamel thickness were investigated again. This cycle was repeated until dentin appeared. Enamel blocks were prepared from the same teeth and their n were obtained using SS-OCT. Multiple regression analysis was performed to reveal any effects of enamel thickness and n on colour difference (ΔE00) and differences in colour parameters with CIELCh and CIELab colour scales. Multiple regression analysis revealed that enamel thickness (p=0.02) and n of enamel (p<0.001) were statistically significant predictors of ΔE00 after complete enamel trimming. The n was also a significant predictor of ΔH' (p=0.01). Enamel thickness and n were not statistically significant predictors of ΔL', ΔC', Δa* and Δb*. Enamel affected tooth colour, in which n was a statistically significant predictor for tooth colour change. Understanding the role of enamel in tooth colour could contribute to development of aesthetic restorative materials that mimic the colour of natural tooth with minimal reduction of the existing enamel. Copyright © 2016 Elsevier Ltd. All rights reserved.

Colour compatibility between teeth and dental shade guides in Quinquagenarians and Septuagenarians.

PubMed

Cocking, C; Cevirgen, E; Helling, S; Oswald, M; Corcodel, N; Rammelsberg, P; Reinelt, G; Hassel, A J

2009-11-01

The aim of this investigation was to determine colour compatibility between dental shade guides, namely, VITA Classical (VC) and VITA 3D-Master (3D), and human teeth in quinquagenarians and septuagenarians. Tooth colour, described in terms of L*a*b* values of the middle third of facial tooth surface of 1391 teeth, was measured using VITA Easyshade in 195 subjects (48% female). These were compared with the colours (L*a*b* values) of the shade tabs of VC and 3D. The mean coverage error and the percentage of tooth colours being within a given colour difference (DeltaE(ab)) from the tabs of VC and 3D were calculated. For comparison, hypothetical, optimized, population-specific shade guides were additionally calculated based on discrete optimization techniques for optimizing coverage. Mean coverage error was DeltaE(ab) = 3.51 for VC and DeltaE(ab) = 2.96 for 3D. Coverage of tooth colours by the tabs of VC and 3D within DeltaE(ab) = 2 was 23% and 24%, respectively, (DeltaE(ab)

Colour change evaluation on UV radiation exposure for Păun-Repedea calcareous geomaterial

NASA Astrophysics Data System (ADS)

Pelin, V.; Sandu, I.; Munteanu, M.; Iurcovschi, C. T.; Gurlui, S.; Sandu, AV; Vasilache, V.; Brȃnzilă, M.; Sandu, I. G.

2016-06-01

When talking about the preservation treatments that can be applied to natural stones used in different constructions, the surface hydrophobization plays an important part, especially when referring to porous surfaces like the calcareous oolithic stones specific to Repedea area, Iasi County, Romania. The present paper presents a method that evaluates the hydrophobization efficiency of two types of pellicles, involving UV artificial ageing and colorimetric analysis of the treated surfaces. The evaluation was done through continuous colorimetric monitoring and by comparing the evolution of the chromatic modifications of the two treated surfaces with the original colorimetric values and with the witness area, which was exposed to UV radiations under the same conditions, but left chemical untreated. The techniques used during this experiment were: CIE L*a*b* colorimetry, OM, SEM-EDX, UV radiation exposure and Spectrum Irradiance Measurement.

Bioremediation of weathered-building stone surfaces.

PubMed

Webster, Alison; May, Eric

2006-06-01

Atmospheric pollution and weathering of stone surfaces in urban historic buildings frequently results in disfigurement or damage by salt crust formation (often gypsum), presenting opportunities for bioremediation using microorganisms. Conventional techniques for the removal of these salt crusts from stone have several disadvantages: they can cause colour changes; adversely affect the movement of salts within the stone structure; or remove excessive amounts of the original surface. Although microorganisms are commonly associated with detrimental effects to the integrity of stone structures, there is growing evidence that they can be used to treat this type of stone deterioration in objects of historical and cultural significance. In particular, the ability and potential of different microorganisms to either remove sulfate crusts or form sacrificial layers of calcite that consolidate mineral surfaces have been demonstrated. Current research suggests that bioremediation has the potential to offer an additional technology to conservators working to restore stone surfaces in heritage buildings.

Fundus autofluorescence and colour fundus imaging compared during telemedicine screening in patients with diabetes.

PubMed

Kolomeyer, Anton M; Baumrind, Benjamin R; Szirth, Bernard C; Shahid, Khadija; Khouri, Albert S

2013-06-01

We investigated the use of fundus autofluorescence (FAF) imaging in screening the eyes of patients with diabetes. Images were obtained from 50 patients with type 2 diabetes undergoing telemedicine screening with colour fundus imaging. The colour and FAF images were obtained with a 15.1 megapixel non-mydriatic retinal camera. Colour and FAF images were compared for pathology seen in nonproliferative and proliferative diabetic retinopathy (NPDR and PDR, respectively). A qualitative assessment was made of the ease of detecting early retinopathy changes and the extent of existing retinopathy. The mean age of the patients was 47 years, most were male (82%) and most were African American (68%). Their mean visual acuity was 20/45 and their mean intraocular pressure was 14.3 mm Hg. Thirty-eight eyes (76%) did not show any diabetic retinopathy changes on colour or FAF imaging. Seven patients (14%) met the criteria for NPDR and five (10%) for severe NPDR or PDR. The most common findings were microaneurysms, hard exudates and intra-retinal haemorrhages (IRH) (n = 6 for each). IRH, microaneurysms and chorioretinal scars were more easily visible on FAF images. Hard exudates, pre-retinal haemorrhage and fibrosis, macular oedema and Hollenhorst plaque were easier to identify on colour photographs. The value of FAF imaging as a complementary technique to colour fundus imaging in detecting diabetic retinopathy during ocular screening warrants further investigation.

Colour fluctuations in grapheme-colour synaesthesia: The effect of clinical and non-clinical mood changes.

PubMed

Kay, Collette L; Carmichael, Duncan A; Ruffell, Henry E; Simner, Julia

2015-08-01

Synaesthesia is a condition that gives rise to unusual secondary sensations (e.g., colours are perceived when listening to music). These unusual sensations tend to be reported as being stable throughout adulthood (e.g., Simner & Logie, 2007, Neurocase, 13, 358) and the consistency of these experiences over time is taken as the behavioural hallmark of genuineness. Our study looked at the influence of mood states on synaesthetic colours. In Experiment 1, we recruited grapheme-colour synaesthetes (who experience colours from letters/digits) and elicited their synaesthetic colours, as well as their mood and depression states, in two different testing sessions. In each session, participants completed the PANAS-X (Watson & Clark, 1999) and the BDI-II (Beck, Steer, & Brown, 1996, Manual for Beck Depression Inventory-II), and chose their synaesthetic colours for letters A-Z from an interactive colour palette. We found that negative mood significantly decreased the luminance of synaesthetic colours. In Experiment 2, we showed that synaesthetic colours were also less luminant for synaesthetes with anxiety disorder, versus those without. Additional evidence suggests that colour saturation, too, may inversely correlate with depressive symptoms. These results show that fluctuations in mood within both a normal and clinical range influence synaesthetic colours over time. This has implications for our understanding about the longitudinal stability of synaesthetic experiences, and of how mood may interact with the visual (imagery) systems. © 2014 The British Psychological Society.

The evolutionary history of colour polymorphism in Ischnura damselflies.

PubMed

Sánchez-Guillén, Rosa A; Cordero-Rivera, Adolfo; Rivas-Torres, Anais; Wellenreuther, Maren; Bybee, Seth; Hansson, Bengt; Velasquez-Vélez, María I; Realpe, Emilio; Chávez-Ríos, Jesús R; Villalobos, Fabricio; Dumont, Henri

2018-05-10

A major challenge in evolutionary biology consists of understanding how genetic and phenotypic variation is created and maintained. In the present study, we investigated the origin(s) and evolutionary patterns of the female-limited colour polymorphism in ischnuran damselflies. These consist of the presence of one to three colour morphs: one androchrome morph with a colouration that is similar to the male, and two gynochrome morphs (infuscans and aurantiaca) with female-specific colouration. We (i) documented the colour and mating system of 44 of the 75 taxa within the genus Ischnura, (ii) reconstructed the evolutionary history of colour and mating system to identify the ancestral state, (iii) evaluated the stability of the colour morph status over time, and (iv) tested for a correlation between colour and mating system. We found that the ances tral female colour of Ischnura was monomorphic and aurantiaca and that colour morph status changed over time; characterised by many gains and losses across the species tree. Our results further showed that colour polymorphism is significantly more frequent among polyandric species, whereas monandric species tend to be monomorphic. Research on some Ischnura species has shown that colour morphs have evolved to reduce male mating harassment, and our finding that the same phenotypic morphs have evolved multiple times (convergent evolution) suggests that several species in this genus might be experiencing similar selective pressures. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Temperature-related degradation and colour changes of historic paintings containing vivianite

NASA Astrophysics Data System (ADS)

Čermáková, Zdeňka; Švarcová, Silvie; Hradilová, Janka; Bezdička, Petr; Lančok, Adriana; Vašutová, Vlasta; Blažek, Jan; Hradil, David

2015-04-01

Temperature-related degradation of pure synthetic as well as partly oxidised natural vivianite has been studied by high-temperature X-ray diffraction (HT-XRD) covering the whole extent of the temperature-related stability of its structure. While temperatures around 70 °C are already damaging to vivianite, exposition to 160 °C results in complete amorphisation of both the vivianite and its oxidation products. As indicated by Mössbauer spectroscopy, temperature-induced oxidation of vivianite starts at 90 °C. To study the occurring structural as well as accompanying colour changes in more detail, model vivianite paint layer samples with different historic binders were prepared and subjected to increased temperatures. Exposition to 80 °C caused pronounced colour changes of all the samples: ground natural blue vivianite became grey - a colour change which has been described in actual works of art. Regarding the binders, the oil seemed to facilitate the transfer of heat to vivianite's grains. To simulate conditions of conservation treatment under which the painting is exposed to increased temperatures, oil-on-canvas mock-ups with vivianite were prepared and relined in a traditional way using iron. The treatment affected preferentially larger grains of vivianite; the micro-samples documented their change to grey, and their Raman spectra showed the change from vivianite to metavivianite.

Predicting solvatochromic shifts and colours of a solvated organic dye: The example of nile red

NASA Astrophysics Data System (ADS)

Zuehlsdorff, T. J.; Haynes, P. D.; Payne, M. C.; Hine, N. D. M.

2017-03-01

The solvatochromic shift, as well as the change in colour of the simple organic dye nile red, is studied in two polar and two non-polar solvents in the context of large-scale time-dependent density-functional theory (TDDFT) calculations treating large parts of the solvent environment from first principles. We show that an explicit solvent representation is vital to resolve absorption peak shifts between nile red in n-hexane and toluene, as well as acetone and ethanol. The origin of the failure of implicit solvent models for these solvents is identified as being due to the strong solute-solvent interactions in form of π-stacking and hydrogen bonding in the case of toluene and ethanol. We furthermore demonstrate that the failures of the computationally inexpensive Perdew-Burke-Ernzerhof (PBE) functional in describing some features of the excited state potential energy surface of the S1 state of nile red can be corrected for in a straightforward fashion, relying only on a small number of calculations making use of more sophisticated range-separated hybrid functionals. The resulting solvatochromic shifts and predicted colours are in excellent agreement with experiment, showing the computational approach outlined in this work to yield very robust predictions of optical properties of dyes in solution.

Texture variations suppress suprathreshold brightness and colour variations.

PubMed

Schofield, Andrew J; Kingdom, Frederick A A

2014-01-01

Discriminating material changes from illumination changes is a key function of early vision. Luminance cues are ambiguous in this regard, but can be disambiguated by co-incident changes in colour and texture. Thus, colour and texture are likely to be given greater prominence than luminance for object segmentation, and better segmentation should in turn produce stronger grouping. We sought to measure the relative strengths of combined luminance, colour and texture contrast using a suprathreshhold, psychophysical grouping task. Stimuli comprised diagonal grids of circular patches bordered by a thin black line and contained combinations of luminance decrements with either violet, red, or texture increments. There were two tasks. In the Separate task the different cues were presented separately in a two-interval design, and participants indicated which interval contained the stronger orientation structure. In the Combined task the cues were combined to produce competing orientation structure in a single image. Participants had to indicate which orientation, and therefore which cue was dominant. Thus we established the relative grouping strength of each cue pair presented separately, and compared this to their relative grouping strength when combined. In this way we observed suprathreshold interactions between cues and were able to assess cue dominance at ecologically relevant signal levels. Participants required significantly more luminance and colour compared to texture contrast in the Combined compared to Separate conditions (contrast ratios differed by about 0.1 log units), showing that suprathreshold texture dominates colour and luminance when the different cues are presented in combination.

Protein oxidation in emulsified cooked burger patties with added fruit extracts: Influence on colour and texture deterioration during chill storage.

PubMed

Ganhão, Rui; Morcuende, David; Estévez, Mario

2010-07-01

The influence of protein oxidation, as measured by the dinitrophenylhydrazine (DNPH) method, on colour and texture changes during chill storage (2 degrees C, 12days) of cooked burger patties was studied. Extracts from arbutus-berries (Arbutus unedoL., AU), common hawthorns (Crataegus monogynaL., CM), dog roses (Rosa caninaL., RC) and elm-leaf blackberries (Rubus ulmifoliusSchott., RU) were prepared, added to burger patties (3% of total weight) and evaluated as inhibitors of protein oxidation and colour and texture changes. Negative (no added extract, C) and positive control (added quercetin; 230mg/kg, Q) groups were also considered. The significant increase of protein carbonyls during chill storage of control burger patties reflect the intense oxidative degradation of the muscle proteins. Concomitantly, an intense loss of redness and increase of hardness was found to take place in burger patties throughout refrigerated storage. Most fruit extracts as well as Q significantly reduced the formation of protein carbonyls and inhibited colour and texture deterioration during chill storage. Likely mechanisms through which protein oxidation could play a major role on colour and texture changes during chill storage of burger patties are discussed. Amongst the extracts, RC was most suitable for use as a functional ingredient in processed meats since it enhanced oxidative stability, colour and texture properties of burger patties with no apparent drawbacks. Copyright 2010 Elsevier Ltd. All rights reserved.

[Visual function evaluation in human immunodeficiency virus carriers].

PubMed

Solís-Castillo, A; Ramírez-Ponce, L A; Valdez-González, T; Seijo, E; Voorduin-Ramos, S; López-Star, E M

2011-04-01

To determine whether there are changes in the peripapillary nerve fibre layer, in colour vision, contrast sensitivity, dark adaptation and electroretinography changes in these patients who do not have infectious retinitis. We studied 52 patients without ocular pathology; the mean age was 35.88 years old. We observed less thickness in all quadrants, except the nasal. The colour vision was altered in 27.77% of the patients. The contrast sensitivity test showed high frequency alterations. There was no statistically significant difference in the electroretinography test or in dark adaptation. There are changes in the peripapillary nerve fibre layer thickness; also we found changes in colour vision, contrast sensitivity and a decreasing trend of the B wave in the electroreninogram. Copyright © 2010 Sociedad Española de Oftalmología. Published by Elsevier Espana. All rights reserved.

Is the ‘blue’ colour convention for inhaled reliever medications important? A UK-based survey of healthcare professionals and patients with airways disease

PubMed Central

Fletcher, Monica; Scullion, Jane; White, John; Thompson, Bronwen; Capstick, Toby

2016-01-01

In many countries, short-acting β2-agonist inhalers have traditionally been coloured blue. This inhaled therapy has also conventionally been known as a ‘reliever’ by patients and healthcare professionals (HCPs), in comparison with ‘preventer’ medications (inhaled steroids). With the rapidly changing market in inhaled therapy for COPD and asthma and growing numbers of devices, there has been some concern that the erosion of traditional colour conventions is leading to patients (and HCPs) becoming confused about the role of different therapies. In order to assess whether there was concern over the perceived changing colour conventions, the UK Inhaler Group carried out a large online survey of patients and HCPs. The aim was to determine how patients and HCPS identify and describe inhaled drugs, and how this might impact on use of medicines and safety. The results of the survey highlighted the importance of the term ‘blue inhaler’ for patients with only 11.3% never referring to the colour when referring to their inhaler. For HCPs, 95% felt colour conventions were important when referring to reliever medication. In addition, HCPs appear to refer to inhalers mainly by colour when talking to patients. Our conclusions were that the concept of a ‘blue inhaler’ remains important to patients and healthcare professionals. These results add to the debate about the need to formalise the colour coding of inhaled therapies, in particular using the colour blue for inhalers for rapid relief of symptoms, as this convention may be an important measure and contributor to patient safety. Our survey should provide impetus for all interested parties to discuss and agree a formal industry-wide approach to colour coding of inhaled therapies for the benefit of patients and carers and HCPs. PMID:27808097

Correlation Study of PVDF Membrane Morphology with Protein Adsorption: Quantitative Analysis by FTIR/ATR Technique

NASA Astrophysics Data System (ADS)

Ideris, N.; Ahmad, A. L.; Ooi, B. S.; Low, S. C.

2018-05-01

Microporous PVDF membranes were used as protein capture matrices in immunoassays. Because the most common labels in immunoassays were detected based on the colour change, an understanding of how protein concentration varies on different PVDF surfaces was needed. Herein, the correlation between the membrane pore size and protein adsorption was systematically investigated. Five different PVDF membrane morphologies were prepared and FTIR/ATR was employed to accurately quantify the surface protein concentration on membranes with small pore sizes. SigmaPlot® was used to find a suitable curve fit for protein adsorption and membrane pore size, with a high correlation coefficient, R2, of 0.9971.

Perception of Safety and Liking Associated to the Colour Intervention of Bike Lanes: Contribution from the Behavioural Sciences to Urban Design and Wellbeing.

PubMed

Vera-Villarroel, Pablo; Contreras, Daniela; Lillo, Sebastián; Beyle, Christian; Segovia, Ariel; Rojo, Natalia; Moreno, Sandra; Oyarzo, Francisco

2016-01-01

The perception of colour and its subjective effects are key issues to designing safe and enjoyable bike lanes. This paper addresses the relationship between the colours of bike lane interventions-in particular pavement painting and intersection design-and the subjective evaluation of liking, visual saliency, and perceived safety related to such an intervention. Utilising images of three real bike lane intersections modified by software to change their colour (five in total), this study recruited 538 participants to assess their perception of all fifteen colour-design combinations. A multivariate analysis of covariance (MANCOVA) with the Bonferroni post hoc test was performed to assess the effect of the main conditions (colour and design) on the dependent variables (liking towards the intervention, level of visual saliency of the intersection, and perceived safety of the bike lane). The results showed that the colour red was more positively associated to the outcome variables, followed by yellow and blue. Additionally, it was observed that the effect of colour widely outweighs the effect of design, suggesting that the right choice and use of colour would increase the effectiveness on bike-lanes pavement interventions. Limitations and future directions are discussed.

Context-dependent effects of background colour in free recall with spatially grouped words.

PubMed

Sakai, Tetsuya; Isarida, Toshiko K; Isarida, Takeo

2010-10-01

Three experiments investigated context-dependent effects of background colour in free recall with groups of items. Undergraduates (N=113) intentionally studied 24 words presented in blocks of 6 on a computer screen with two different background colours. The two background colours were changed screen-by-screen randomly (random condition) or alternately (alternation condition) during the study period. A 30-second filled retention interval was imposed before an oral free-recall test. A signal for free recall was presented throughout the test on one of the colour background screens presented at study. Recalled words were classified as same- or different-context words according to whether the background colours at study and test were the same or different. The random condition produced significant context-dependent effects, whereas the alternation condition showed no context-dependent effects, regardless of whether the words were presented once or twice. Furthermore, the words presented on the same screen were clustered in recall, whereas the words presented against the same background colour but on different screens were not clustered. The present results imply: (1) background colours can cue spatially massed words; (2) background colours act as temporally local context; and (3) predictability of the next background colour modulates the context-dependent effect.

Organic-on-silicon complementary metal-oxide-semiconductor colour image sensors.

PubMed

Lim, Seon-Jeong; Leem, Dong-Seok; Park, Kyung-Bae; Kim, Kyu-Sik; Sul, Sangchul; Na, Kyoungwon; Lee, Gae Hwang; Heo, Chul-Joon; Lee, Kwang-Hee; Bulliard, Xavier; Satoh, Ryu-Ichi; Yagi, Tadao; Ro, Takkyun; Im, Dongmo; Jung, Jungkyu; Lee, Myungwon; Lee, Tae-Yon; Han, Moon Gyu; Jin, Yong Wan; Lee, Sangyoon

2015-01-12

Complementary metal-oxide-semiconductor (CMOS) colour image sensors are representative examples of light-detection devices. To achieve extremely high resolutions, the pixel sizes of the CMOS image sensors must be reduced to less than a micron, which in turn significantly limits the number of photons that can be captured by each pixel using silicon (Si)-based technology (i.e., this reduction in pixel size results in a loss of sensitivity). Here, we demonstrate a novel and efficient method of increasing the sensitivity and resolution of the CMOS image sensors by superposing an organic photodiode (OPD) onto a CMOS circuit with Si photodiodes, which consequently doubles the light-input surface area of each pixel. To realise this concept, we developed organic semiconductor materials with absorption properties selective to green light and successfully fabricated highly efficient green-light-sensitive OPDs without colour filters. We found that such a top light-receiving OPD, which is selective to specific green wavelengths, demonstrates great potential when combined with a newly designed Si-based CMOS circuit containing only blue and red colour filters. To demonstrate the effectiveness of this state-of-the-art hybrid colour image sensor, we acquired a real full-colour image using a camera that contained the organic-on-Si hybrid CMOS colour image sensor.

Organic-on-silicon complementary metal–oxide–semiconductor colour image sensors

PubMed Central

Lim, Seon-Jeong; Leem, Dong-Seok; Park, Kyung-Bae; Kim, Kyu-Sik; Sul, Sangchul; Na, Kyoungwon; Lee, Gae Hwang; Heo, Chul-Joon; Lee, Kwang-Hee; Bulliard, Xavier; Satoh, Ryu-Ichi; Yagi, Tadao; Ro, Takkyun; Im, Dongmo; Jung, Jungkyu; Lee, Myungwon; Lee, Tae-Yon; Han, Moon Gyu; Jin, Yong Wan; Lee, Sangyoon

2015-01-01

Complementary metal–oxide–semiconductor (CMOS) colour image sensors are representative examples of light-detection devices. To achieve extremely high resolutions, the pixel sizes of the CMOS image sensors must be reduced to less than a micron, which in turn significantly limits the number of photons that can be captured by each pixel using silicon (Si)-based technology (i.e., this reduction in pixel size results in a loss of sensitivity). Here, we demonstrate a novel and efficient method of increasing the sensitivity and resolution of the CMOS image sensors by superposing an organic photodiode (OPD) onto a CMOS circuit with Si photodiodes, which consequently doubles the light-input surface area of each pixel. To realise this concept, we developed organic semiconductor materials with absorption properties selective to green light and successfully fabricated highly efficient green-light-sensitive OPDs without colour filters. We found that such a top light-receiving OPD, which is selective to specific green wavelengths, demonstrates great potential when combined with a newly designed Si-based CMOS circuit containing only blue and red colour filters. To demonstrate the effectiveness of this state-of-the-art hybrid colour image sensor, we acquired a real full-colour image using a camera that contained the organic-on-Si hybrid CMOS colour image sensor. PMID:25578322

A case study on bio-optical and radiometric quantities in northwest European shelf seas

NASA Astrophysics Data System (ADS)

Garaba, Shungu; Zielinski, Oliver

2013-04-01

Colour of seawater has become an integral tool in understanding surface marine ecosystems and processes. Additionally, operational oceanographic observatories are becoming more prominent these days while at the same time hyperspectral radiometric sensors are becoming increasingly affordable. This has driven a wide spread use of these hyperspectral sensors to measure reflectance above the water surface from stationary and mobile platforms alike. As enormous amounts of data are produced and favourably processed in real-time, effective quality control procedures become more than just supporting tools, but a crucial prerequisite for trustworthy and manageable information. Here, we use bio-geophysical and hyperspectral radiometric measurements from German Bight (GB), North Sea (NS), Inner Seas (ISS), Irish Sea (IS) and Celtic Sea (CS) to identify and establish relationships between colour producing agents (CPAs) and perceived colour of seawater. In order to obtain valid optical measurements, meteorological and sunglint contamination were mitigated using state-of-the-art quality control protocols. The remote sensing reflectance measured is transformed into discrete Forel-Ule numerical indices (FUI), 1 (indigo-blue, oligotrophic) to 21 (cola brown, hyper-eutrophic). We present a novel approach of estimating which of the three main CPAs of seawater control perceived colour of seawater. Our bio-optical models for estimating FUI for measured CPAs; chlorophyll (Chl-a), coloured dissolved organic material (CDOM) and suspended particulate material (SPM) had correlation coefficients, R² (GB = 0.98, NS = 0.23, ISS=0.99, IS=0.63, CS = 0.16). It was also observed that salinity can be estimated from coloured dissolved organic matter with good accuracy, R² (GB = 0.94, NS = 0.44, ISS=0.90, IS=0.85, CS = 0.51). We show that ocean colour products i.e. reflectance and perceived colour of seawater can be used to infer, with good accuracy, environmental parameters e.g. Chl-a, CDOM, SPM, salinity and Secchi depth of the investigated waters providing an effective and affordable tool for operational marine observations. Improved and extensive field investigations are required to further enhance the sensitivity/accuracy of such region specific bio-optical models.

Innate preference and learning of colour in the male cotton bollworm moth, Helicoverpa armigera.

PubMed

Satoh, Aya; Kinoshita, Michiyo; Arikawa, Kentaro

2016-12-15

We investigated colour discrimination and learning in adult males of the nocturnal cotton bollworm moth, Helicoverpa armigera, under a dim light condition. The naive moths preferred blue and discriminated the innately preferred blue from several shades of grey, indicating that the moths have colour vision. After being trained for 2 days to take nectar at a yellow disc, an innately non-preferred colour, moths learned to select yellow over blue. The choice distribution between yellow and blue changed significantly from that of naive moths. However, the dual-choice distribution of the trained moths was not significantly biased to yellow: the preference for blue is robust. We also tried to train moths to grey, which was not successful. The limited ability to learn colours suggests that H armigera may not strongly rely on colours when searching for flowers in the field, although they have the basic property of colour vision. © 2016. Published by The Company of Biologists Ltd.

Effect of TiO2-Crystal Forms on the Photo-Degradation of EVA/PLA Blend Under Accelerated Weather Testing

NASA Astrophysics Data System (ADS)

Van Cong, Do; Trang, Nguyen Thi Thu; Giang, Nguyen Vu; Lam, Tran Dai; Hoang, Thai

2016-05-01

Photo-degradation of poly (ethylene-co-vinyl acetate) (EVA)/poly (lactic acid) (PLA) blend and EVA/PLA/TiO2 nanocomposites was carried out under accelerated weather testing conditions by alternating cycles of ultraviolet (UV) light and moisture at controlled and elevated temperatures. The characters, properties, and morphology of these materials before and after accelerated weather testing were determined by Fourier transform infrared spectroscopy, colour changes, viscosity, tensile test, thermogravimetric analysis, and field emission scanning electron microscopy. The increases in the content of oxygen-containing groups, colour changes; the decreases in viscosity, tensile properties, and thermal stability of these materials after accelerated weather testing are the evidence for the photo-degradation of the blend and nanocomposites. After accelerated weather testing, the appearance of many micro-holes and micro-pores on the surface of the collected samples was observed. The photo-degradation degree of the nanocomposites depended on the TiO2-crystal form. Rutile TiO2 do not enhance the degradation, but anatase and mixed crystals TiO2 nanoparticles promoted the degradation of the nanocomposites. Particularly, the mixed crystals TiO2 nanoparticles showed the highest photo-catalytic activity of the nanocomposites.

Development of the smartphone-based colorimetry for multi-analyte sensing arrays.

PubMed

Hong, Jong Il; Chang, Byoung-Yong

2014-05-21

Here we report development of a smartphone app (application) that digitizes the colours of a colorimetric sensor array. A conventional colorimetric sensor array consists of multiple paper-based sensors, and reports the detection results in terms of colour change. Evaluation of the colour changes is normally done by the naked eye, which may cause uncertainties due to personal subjectivity and the surrounding conditions. Solutions have been particularly sought in smartphones as they are capable of spectrometric functions. Our report specifically focuses on development of a practical app for immediate point-of-care (POC) multi-analyte sensing without additional devices. First, the individual positions of the sensors are automatically identified by the smartphone; second, the colours measured at each sensor are digitized based on a correction algorithm; and third, the corrected colours are converted to concentration values by pre-loaded calibration curves. All through these sequential processes, the sensor array taken in a smartphone snapshot undergoes laboratory-level spectrometry. The advantages of inexpensive and convenient paper-based colorimetry and the ubiquitous smartphone are tied to achieve a ready-to-go POC diagnosis.

Spectral sensitivity of a colour changing spider.

PubMed

Defrize, Jérémy; Lazzari, Claudio R; Warrant, Eric J; Casas, Jérôme

2011-04-01

Vision plays a paramount role in some spider families such as the Salticidae, Lycosidae and Thomisidae, as it is involved in prey hunting, orientation or choice of substrate. In the thomisid Misumena vatia, for which the substrate colour affects the body colour, vision seems to mediate morphological colour changes. However, nothing is known about which component of visual signals from the substrate might be perceived, nor whether M. vatia possesses the physiological basis for colour vision. The aim of this study is thus to investigate the vision of this spider species by measuring the spectral sensitivities of the different pairs of eyes using electrophysiological methods. Extra- and intracellular electrophysiological recordings combined with selective adaptation revealed the presence of two classes of photoreceptor cells, one sensitive in the UV region of the spectrum (around 340 nm) and one sensitive in the green (around 520 nm) regions in the four pairs of eyes. We conclude that M. vatia possesses the physiological potential to perceive both chromatic and achromatic components of the environment. Copyright © 2011 Elsevier Ltd. All rights reserved.

The role of pollinators in maintaining variation in flower colour in the Rocky Mountain columbine, Aquilegia coerulea.

PubMed

Thairu, Margaret W; Brunet, Johanne

2015-05-01

Flower colour varies within and among populations of the Rocky Mountain columbine, Aquilegia coerulea, in conjunction with the abundance of its two major pollinators, hawkmoths and bumble-bees. This study seeks to understand whether the choice of flower colour by these major pollinators can help explain the variation in flower colour observed in A. coerulea populations. Dual choice assays and experimental arrays of blue and white flowers were used to determine the preference of hawkmoths and bumble-bees for flower colour. A test was made to determine whether a differential preference for flower colour, with bumble-bees preferring blue and hawkmoths white flowers, could explain the variation in flower colour. Whether a single pollinator could maintain a flower colour polymorphism was examined by testing to see if preference for a flower colour varied between day and dusk for hawkmoths and whether bumble-bees preferred novel or rare flower colour morphs. Hawkmoths preferred blue flowers under both day and dusk light conditions. Naïve bumble-bees preferred blue flowers but quickly learned to forage randomly on the two colour morphs when similar rewards were presented in the flowers. Bees quickly learned to associate a flower colour with a pollen reward. Prior experience affected the choice of flower colour by bees, but they did not preferentially visit novel flower colours or rare or common colour morphs. Differences in flower colour preference between the two major pollinators could not explain the variation in flower colour observed in A. coerulea. The preference of hawkmoths for flower colour did not change between day and dusk, and bumble-bees did not prefer a novel or a rare flower colour morph. The data therefore suggest that factors other than pollinators may be more likely to affect the flower colour variation observed in A. coerulea. Published by Oxford University Press on behalf of the Annals of Botany Company 2015. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Colour Terms Affect Detection of Colour and Colour-Associated Objects Suppressed from Visual Awareness

PubMed Central

Forder, Lewis; Taylor, Olivia; Mankin, Helen; Scott, Ryan B.; Franklin, Anna

2016-01-01

The idea that language can affect how we see the world continues to create controversy. A potentially important study in this field has shown that when an object is suppressed from visual awareness using continuous flash suppression (a form of binocular rivalry), detection of the object is differently affected by a preceding word prime depending on whether the prime matches or does not match the object. This may suggest that language can affect early stages of vision. We replicated this paradigm and further investigated whether colour terms likewise influence the detection of colours or colour-associated object images suppressed from visual awareness by continuous flash suppression. This method presents rapidly changing visual noise to one eye while the target stimulus is presented to the other. It has been shown to delay conscious perception of a target for up to several minutes. In Experiment 1 we presented greyscale photos of objects. They were either preceded by a congruent object label, an incongruent label, or white noise. Detection sensitivity (d’) and hit rates were significantly poorer for suppressed objects preceded by an incongruent label compared to a congruent label or noise. In Experiment 2, targets were coloured discs preceded by a colour term. Detection sensitivity was significantly worse for suppressed colour patches preceded by an incongruent colour term as compared to a congruent term or white noise. In Experiment 3 targets were suppressed greyscale object images preceded by an auditory presentation of a colour term. On congruent trials the colour term matched the object’s stereotypical colour and on incongruent trials the colour term mismatched. Detection sensitivity was significantly poorer on incongruent trials than congruent trials. Overall, these findings suggest that colour terms affect awareness of coloured stimuli and colour- associated objects, and provide new evidence for language-perception interaction in the brain. PMID:27023274

Production of an anthocyanin-rich food colourant from Thymus moroderi and its application in foods.

PubMed

Díaz-García, Miriam Cristina; Castellar, María Rosario; Obón, José María; Obón, Concepción; Alcaraz, Francisco; Rivera, Diego

2015-04-01

Anthocyanins and other polyphenols from flowers and bracts of Thymus sp. are studied. An anthocyanin-rich food colourant with interesting high antioxidant activity from Thymus moroderi has been obtained, and applied to colour foods. Anthocyanins and other polyphenols from T. moroderi and another five Thymus sp. were extracted in methanol/hydrochloric acid 0.1 mol L(-1) (50/50, v/v) 2 h stirring at 50 °C. They were identified and quantified by HPLC-PDA-MS and UHPLC-PDA-fluorescence, as total individual polyphenols. Total polyphenols were also determined. Flowers had higher anthocyanins and other polyphenols concentrations than bracts; for example, total polyphenols content of T. moroderi were 131.58 and 61.98 g GAE kg(-1) vegetal tissue, respectively. A liquid concentrated colourant was obtained from T. moroderi using water/citric acid as solvent. It was characterised and compared with other two commercial anthocyanin-rich food colourants from red grape skin and red carrot (colour strength of 1.7 and 3.6 AU, respectively). T. moroderi colourant had 1.2 AU colour strength, and high storage stability (>97.1% remaining colour after 110 days at 4 °C). It showed a higher polyphenols content than commercial colourants. Its antioxidant activity was 0.707 mmol Trolox eq. g(-1) plant dry weight, 69.5 times higher than red carrot. The three colourants were applied to colour yogurts, giving pinky tonalities. The colour did not change evidently (ΔE*(ab)  < 3) when stored under refrigeration during 1 month. T. moroderi can be a source of anthocyanin-rich food colourant (E-163) with both high polyphenols content and high antioxidant activity. This colourant gives a stable colour to a yogurt during 1 month. These results expand the use of natural colourants. © 2014 Society of Chemical Industry.

Colour Terms Affect Detection of Colour and Colour-Associated Objects Suppressed from Visual Awareness.

PubMed

Forder, Lewis; Taylor, Olivia; Mankin, Helen; Scott, Ryan B; Franklin, Anna

2016-01-01

The idea that language can affect how we see the world continues to create controversy. A potentially important study in this field has shown that when an object is suppressed from visual awareness using continuous flash suppression (a form of binocular rivalry), detection of the object is differently affected by a preceding word prime depending on whether the prime matches or does not match the object. This may suggest that language can affect early stages of vision. We replicated this paradigm and further investigated whether colour terms likewise influence the detection of colours or colour-associated object images suppressed from visual awareness by continuous flash suppression. This method presents rapidly changing visual noise to one eye while the target stimulus is presented to the other. It has been shown to delay conscious perception of a target for up to several minutes. In Experiment 1 we presented greyscale photos of objects. They were either preceded by a congruent object label, an incongruent label, or white noise. Detection sensitivity (d') and hit rates were significantly poorer for suppressed objects preceded by an incongruent label compared to a congruent label or noise. In Experiment 2, targets were coloured discs preceded by a colour term. Detection sensitivity was significantly worse for suppressed colour patches preceded by an incongruent colour term as compared to a congruent term or white noise. In Experiment 3 targets were suppressed greyscale object images preceded by an auditory presentation of a colour term. On congruent trials the colour term matched the object's stereotypical colour and on incongruent trials the colour term mismatched. Detection sensitivity was significantly poorer on incongruent trials than congruent trials. Overall, these findings suggest that colour terms affect awareness of coloured stimuli and colour- associated objects, and provide new evidence for language-perception interaction in the brain.

Colour and pH changes of tempe during extended fermentation

NASA Astrophysics Data System (ADS)

Muzdalifah, D.; Athaillah, Z. A.; Nugrahani, W.; Devi, A. F.

2017-01-01

Tempe is a nutritious food, prepared mostly from soybeans and was originated in Indonesia. Tempe is sometimes collected beyond its maturity age for culinary purpose. The studies of overripe tempe ranged from microbiology, chemical and nutritional changes, functionality and safety, to sensorial aspect. Study which follows pH and colour changes of tempe during fermentation, however, is scarce. The objectives of this study were to investigate and model the colour and pH changes of tempe and the mould mycelia during extended fermentation with Rhizopus spp. up to 156 hours. Our investigation revealed that both lightness soybeans and mycelia of the tempe decreased with increasing fermentation time while pH of the tempe increased. The decrease of both lightness followed simple cubic equations whilst the pH increased linearly with increasing time. The other a values of tempe decreased by one point in the first 72 h of fermentation and tended to increase later however did not reach the initial a value, The b value decreased by approximately two points during the first 24 h of fermentation and the changes during the rest of fermentation time were not significant. The colour changes were believed to be the results of increased numbers of Rhizopus spp which entered the death phase, increased amount of linoleic and linolenic unsaturated fatty acids which were prone to oxidation, and formation of red coloured vitamin B12. Meanwhile, the increase of pH was majorly because of protein break down which led to increased ammonia production. The utilisation of lactic acid for mould growth also contributed to the alkalinisation, however to a much lesser extent. The lactic acid was previously formed during the soaking which resulted in decrease in pH of initial soybeans.

Seasonal Skin Colour Changes in a Sample Teenage Population Measured by Reflection Spectrophotometry

ERIC Educational Resources Information Center

Stringer, M. R.; Cruse-Sawyer, J. E.

2007-01-01

As part of a classroom-based research project, reflectance spectra from the skin of a group of teenage school students were recorded over a four-month period, from early spring to mid-summer. The relative changes in skin colour during the course of the study were quantified by integrating over the full wavelength range of the normalized…

Quantification of mitral and tricuspid regurgitation by the proximal flow convergence method using two-dimensional colour Doppler and colour Doppler M-mode: influence of the mechanism of regurgitation.

PubMed

Grossmann, G; Giesler, M; Stein, M; Kochs, M; Höher, M; Hombach, V

1998-10-30

In patients with mitral (n=77: organic=49, functional=28) and tricuspid regurgitation (n=55: functional=54) quantified by angiography, the temporal variation of the proximal flow convergence region throughout systole was assessed by colour Doppler M-Mode, and peak and mean radius of the proximal isovelocity surface area for 28 cm/s blood flow velocity were measured. Additionally, the peak radius derived from two-dimensional colour Doppler was obtained. About 50% of the patients with mitral and tricuspid regurgitation showed a typical temporal variation of the flow convergence region related to the mechanism of regurgitation. The different proximal isovelocity surface area radii were similarly correlated to the angiographic grade in mitral and tricuspid regurgitation (rank correlation coefficients 0.55-0.89) and they differentiated mild to moderate (grade < or =II) from severe (grade > or =III) mitral and tricuspid regurgitation with comparable accuracy (82-96%). However, moderate mitral regurgitation due to leaflet prolapse in two patients was correctly classified by the mean M-mode radius and overestimated by both peak radii. Only half of the patients showed a typical variation of the flow convergence region related to the mechanism of regurgitation. The different proximal isovelocity surface area radii were suitable to quantify mitral and tricuspid regurgitation in most patients. However, in mitral regurgitation due to leaflet prolapse the use of the mean M-mode radius may avoid overestimation.

Assessing the effects of UVA photocatalysis on soot-coated TiO2-containing mortars.

PubMed

De la Rosa, José M; Miller, Ana Z; Pozo-Antonio, J Santiago; González-Pérez, José A; Jiménez-Morillo, Nicasio T; Dionisio, Amelia

2017-12-15

The deposition of soot on building surfaces darkens their colour and leads to undesirable black crusts, which are one of the most serious problems on the conservation of built cultural heritage. As a preventive strategy, self-cleaning systems based on the use of titanium dioxide (TiO 2 ) coatings have been employed on building materials for degrading organic compounds deposited on building surfaces, improving their durability and performance. In this study, the self-cleaning effect of TiO 2 -containing mortars coated with diesel soot has been appraised under laboratory conditions. The mortar samples were manufactured using lime putty and two different doses of TiO 2 (2.5% and 5%). The lime mortars were then coated with diesel engine soot and irradiated with ultraviolet A (UVA) illumination for 30days. The photocatalytic efficiency was evaluated by visual inspection, field emission scanning electron microscopy (FESEM) and colour spectrophotometry. Changes in the chemical composition of the soot particles (including persistent organic pollutants) were assessed by analytical pyrolysis (Py-GC/MS) and solid state 13 C NMR spectroscopy. The FESEM and colour spectrophotometry revealed that the soot-coated TiO 2 -containing mortars promoted a self-cleaning effect after UVA irradiation. The combination of analytical pyrolysis and 13 C solid state NMR showed that the UVA irradiation caused the cracking of polycyclic aromatic structures and n-alkyl compounds of the diesel soot and its transformation into methyl polymers. Our findings also revealed that the inclusion of TiO 2 in the lime mortar formulations catalysed these transformations promoting the self-cleaning of the soot-stained mortars. The combined action of TiO 2 and UVA irradiation is a promising proxy to clean lime mortars affected by soot deposition. Copyright © 2017 Elsevier B.V. All rights reserved.

Dropping macadamia nuts-in-shell reduces kernel roasting quality.

PubMed

Walton, David A; Wallace, Helen M

2010-10-01

Macadamia nuts ('nuts-in-shell') are subjected to many impacts from dropping during postharvest handling, resulting in damage to the raw kernel. The effect of dropping on roasted kernel quality is unknown. Macadamia nuts-in-shell were dropped in various combinations of moisture content, number of drops and receiving surface in three experiments. After dropping, samples from each treatment and undropped controls were dry oven-roasted for 20 min at 130 °C, and kernels were assessed for colour, mottled colour and surface damage. Dropping nuts-in-shell onto a bed of nuts-in-shell at 3% moisture content or 20% moisture content increased the percentage of dark roasted kernels. Kernels from nuts dropped first at 20%, then 10% moisture content, onto a metal plate had increased mottled colour. Dropping nuts-in-shell at 3% moisture content onto nuts-in-shell significantly increased surface damage. Similarly, surface damage increased for kernels dropped onto a metal plate at 20%, then at 10% moisture content. Postharvest dropping of macadamia nuts-in-shell causes concealed cellular damage to kernels, the effects not evident until roasting. This damage provides the reagents needed for non-enzymatic browning reactions. Improvements in handling, such as reducing the number of drops and improving handling equipment, will reduce cellular damage and after-roast darkening. Copyright © 2010 Society of Chemical Industry.

Ripening of salami: assessment of colour and aspect evolution using image analysis and multivariate image analysis.

PubMed

Fongaro, Lorenzo; Alamprese, Cristina; Casiraghi, Ernestina

2015-03-01

During ripening of salami, colour changes occur due to oxidation phenomena involving myoglobin. Moreover, shrinkage due to dehydration results in aspect modifications, mainly ascribable to fat aggregation. The aim of this work was the application of image analysis (IA) and multivariate image analysis (MIA) techniques to the study of colour and aspect changes occurring in salami during ripening. IA results showed that red, green, blue, and intensity parameters decreased due to the development of a global darker colour, while Heterogeneity increased due to fat aggregation. By applying MIA, different salami slice areas corresponding to fat and three different degrees of oxidised meat were identified and quantified. It was thus possible to study the trend of these different areas as a function of ripening, making objective an evaluation usually performed by subjective visual inspection. Copyright © 2014 Elsevier Ltd. All rights reserved.

Association of iris surface features with iris parameters assessed by swept-source optical coherence tomography in Asian eyes.

PubMed

Tun, Tin A; Chua, Jacqueline; Shi, Yuan; Sidhartha, Elizabeth; Thakku, Sri Gowtham; Shei, William; Tan, Marcus Chiang Lee; Quah, Joanne Hui Min; Aung, Tin; Cheng, Ching-Yu

2016-12-01

To characterise the association of iris surface features (crypts, furrows and colour) with iris volume and curvature assessed by swept-source optical coherence tomography (SSOCT) in Asian eyes. Iris crypts (by number and size) and furrows (by number and circumferential extent) were graded from iris photographs. Iris colour was measured by a customised algorithm written on MATLAB (MathWorks, Natick, Massachusetts, USA). The iris was imaged by SSOCT (SS-1000, CASIA, Tomey, Nagoya, Japan). The associations of surface features with iris parameters were analysed using a generalised estimating equation. A total of 1704 subjects (3297 eyes) were included in the analysis. The majority was Chinese (86.4%), and 63.2% were females, and their mean age (±SD) was 61.4±6.6 years. After adjusting for age, sex, ethnicity, pupil size and corneal arcus, higher iris crypt grade was independently associated with smaller iris volume (β=-0.54, p<0.001), whereas darker irides and higher iris furrow grade were associated with larger iris volume (β=-0.041, p<0.001) and (β=0.233, p<0.001), respectively. Lighter coloured irides with more crypts and/or more furrows were also associated with less convexity (crypts: β=-0.003, p=0.03; furrows: β=-0.004, p=0.007; and colour: β=-0.001, p=0.005). Iris surface features were highly correlated with iris volume and curvature. Irides with more crypts have a smaller volume; and darker irides with more furrows have a larger volume. Lighter irides with more crypts and/or furrows have less convexity. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Worldwide patterns of bird colouration on islands.

PubMed

Doutrelant, Claire; Paquet, Matthieu; Renoult, Julien P; Grégoire, Arnaud; Crochet, Pierre-André; Covas, Rita

2016-05-01

Island environments share distinctive characteristics that offer unique opportunities to investigate parallel evolution. Previous research has produced evidence of an island syndrome for morphological traits, life-history strategies and ecological niches, but little is known about the response to insularity of other important traits such as animal signals. Here, we tested whether birds' plumage colouration is part of the island syndrome. We analysed with spectrophotometry the colouration of 116 species endemic to islands and their 116 closest mainland relatives. We found a pattern of reduced brightness and colour intensity for both sexes on islands. In addition, we found a decrease in the number of colour patches on islands that, in males, was associated with a decrease in the number of same-family sympatric species. These results demonstrate a worldwide pattern of parallel colour changes on islands and suggest that a relaxation of selection on species recognition may be one of the mechanisms involved. © 2016 John Wiley & Sons Ltd/CNRS.

Antibacterial Activity of pH-Dependent Biosynthesized Silver Nanoparticles against Clinical Pathogen

PubMed Central

Chitra, Kethirabalan; Annadurai, Gurusamy

2014-01-01

Simple, nontoxic, environmental friendly method is employed for the production of silver nanoparticles. In this study the synthesized nanoparticles UV absorption band occurred at 400 nm because of the surface Plasmon resonance of silver nanoparticles. The pH of the medium plays important role in the synthesis of control shaped and sized nanoparticles. The colour intensity of the aqueous solution varied with pH. In this study, at pH 9, the colour of the aqueous solution was dark brown, whereas in pH 5 the colour was yellowish brown; the colour difference in the aqueous solution occurred due to the higher production of silver nanoparticles. The antibacterial activity of biosynthesized silver nanoparticles was carried out against E. coli. The silver nanoparticles synthesized at pH 9 showed maximum antibacterial activity at 50 μL. PMID:24967396

Characterization of Streptomyces isolates causing colour changes of mural paintings in ancient Egyptian tombs.

PubMed

Abdel-Haliem, M E F; Sakr, A A; Ali, M F; Ghaly, M F; Sohlenkamp, C

2013-08-25

Paintings in ancient Egyptian tombs often suffer colour changes due to microbial growth and colonization. Streptomyces strains were isolated from mural paintings of Tell Basta and Tanis tombs (East of Nile Delta, Egypt) and were identified using biochemical and molecular methods. The16S rDNA sequences data indicated that isolated strains were closely related to S. coelicolor, S. albidofuscus, S. ambofaciens, S. canarius, S. parvullus, S. corchorusii, S. albidofuscus and S. nigrifaciens. It could be shown that Streptomyces strains are involved on a large scale in the colour changes of paintings and stone support by producing a wide range of metabolites such as acids (oxalic, citric and sulphuric acids), biopigments of melanin, carotenoids, and hydrogen sulphide. Copyright © 2013 Elsevier GmbH. All rights reserved.

Photonic crystals cause active colour change in chameleons.

PubMed

Teyssier, Jérémie; Saenko, Suzanne V; van der Marel, Dirk; Milinkovitch, Michel C

2015-03-10

Many chameleons, and panther chameleons in particular, have the remarkable ability to exhibit complex and rapid colour changes during social interactions such as male contests or courtship. It is generally interpreted that these changes are due to dispersion/aggregation of pigment-containing organelles within dermal chromatophores. Here, combining microscopy, photometric videography and photonic band-gap modelling, we show that chameleons shift colour through active tuning of a lattice of guanine nanocrystals within a superficial thick layer of dermal iridophores. In addition, we show that a deeper population of iridophores with larger crystals reflects a substantial proportion of sunlight especially in the near-infrared range. The organization of iridophores into two superposed layers constitutes an evolutionary novelty for chameleons, which allows some species to combine efficient camouflage with spectacular display, while potentially providing passive thermal protection.

Photonic crystals cause active colour change in chameleons

NASA Astrophysics Data System (ADS)

Teyssier, Jérémie; Saenko, Suzanne V.; van der Marel, Dirk; Milinkovitch, Michel C.

2015-03-01

Many chameleons, and panther chameleons in particular, have the remarkable ability to exhibit complex and rapid colour changes during social interactions such as male contests or courtship. It is generally interpreted that these changes are due to dispersion/aggregation of pigment-containing organelles within dermal chromatophores. Here, combining microscopy, photometric videography and photonic band-gap modelling, we show that chameleons shift colour through active tuning of a lattice of guanine nanocrystals within a superficial thick layer of dermal iridophores. In addition, we show that a deeper population of iridophores with larger crystals reflects a substantial proportion of sunlight especially in the near-infrared range. The organization of iridophores into two superposed layers constitutes an evolutionary novelty for chameleons, which allows some species to combine efficient camouflage with spectacular display, while potentially providing passive thermal protection.

Cephalopod-inspired design of electro-mechano-chemically responsive elastomers for on-demand fluorescent patterning

NASA Astrophysics Data System (ADS)

Wang, Qiming; Gossweiler, Gregory R.; Craig, Stephen L.; Zhao, Xuanhe

2014-09-01

Cephalopods can display dazzling patterns of colours by selectively contracting muscles to reversibly activate chromatophores - pigment-containing cells under their skins. Inspired by this novel colouring strategy found in nature, we design an electro-mechano-chemically responsive elastomer system that can exhibit a wide variety of fluorescent patterns under the control of electric fields. We covalently couple a stretchable elastomer with mechanochromic molecules, which emit strong fluorescent signals if sufficiently deformed. We then use electric fields to induce various patterns of large deformation on the elastomer surface, which displays versatile fluorescent patterns including lines, circles and letters on demand. Theoretical models are further constructed to predict the electrically induced fluorescent patterns and to guide the design of this class of elastomers and devices. The material and method open promising avenues for creating flexible devices in soft/wet environments that combine deformation, colorimetric and fluorescent response with topological and chemical changes in response to a single remote signal.

Applications of vitamin B6 cofactor pyridoxal 5‧-phosphate and pyridoxal 5‧-phosphate crowned gold nanoparticles for optical sensing of metal ions

NASA Astrophysics Data System (ADS)

Bothra, Shilpa; Upadhyay, Yachana; Kumar, Rajender; Sahoo, Suban K.

2017-03-01

Vitamin B6 cofactor pyridoxal 5‧-phosphate (PLP) and PLP crowned gold nanoparticles (PLP-AuNPs) was applied for the optical chemosensing of metal ions in aqueous medium. PLP showed a visually detectable colour change from colourless to yellow and 'turn-off' fluorescence in the presence of Fe3 +. The fluorescence intensity of PLP at 433 nm was also blue-shifted and enhanced at 395 nm upon addition of Al3 +. When the PLP was functionalized over AuNPs surface, the wine red colour of PLP-AuNPs was turned to purplish-blue and the SPR band at 525 nm was red-shifted upon addition of Al3 +, Cd2 + and Pb2 + due to the complexation-induced aggregation of nanoparticles. The developed sensing systems exhibited good selectivity and specificity for the detected analytes (Fe3 +, Al3 +, Cd2 + and Pb2 +).

Microscale Relationships Between Fault Rock Fabric and Structural Style in Megathrusts - Observations from Tohoku-Oki Via J-Fast.

NASA Astrophysics Data System (ADS)

Toy, V. G.; Fagereng, A.; Kirkpatrick, J. D.; Remitti, F.; Rowe, C. D.; Ujiie, K.; Wolfson-Schwehr, M.

2014-12-01

Recovered plate boundary thrust material from the site of the 2011 Tohoku-Oki earthquake rupture contains both distributed and localized fabrics. We1 infer these reflect two end members of behavior, namely steady state creep of weak, velocity/strain-hardening materials versus episodic, seismic failure of strong, velocity/strain-weakening materials. Core and downhole observations and mechanical tests demonstrate the fault rock is primarily smectite and has very low frictional strength (μk~0.08) 2,3,4,5. Additional observations of the recovered core indicate microscale fabrics affect mechanical properties. The fault zone fabric is defined mostly by anastomosing dark surfaces surrounding phacoids. Phacoid size and intensity of dark surfaces vary, probably reflecting differences in total strain. Phacoids contain foliations at angles to their long axes and bounding surfaces. Remnant bedding can be recognized in places, based on variation in phyllosilicate colour or clastic:phyllosilicate ratio (although other colour variations result from alteration1). Anastomosing shear surfaces may coincide with bedding but also commonly truncate it, indicating little primary lithological/rheological control on fabric formation. However, in late mm-thickness, through going, more intensely sheared zones, lithologic contrast more strongly defines phacoids while dark seams may be absent. A transition from distributed shear in phyllosilicates to localized shear on dark surfaces requires local change in stress or strain rate. If the orientation of clay fabrics change due to folding ('turbulent' flow), then weak basal planes of phyllosilicates rotated into unfavourable orientations may act as 'stress risers' promoting localization around phacoids containing poorly oriented fabrics. This mechanism is indicated by the presence of the most folded layering in plate boundary core adjacent to the most distinct through-going surfaces1,2. Alternatively, locally well-oriented fabrics may preferentially shear, leaving surrounding rock as lower strain phacoids. Refs: 1: Kirkpatrick, et al. submitted. Tectonics. 2: Chester et al., 2013. Science 342, 1208-1212. 3: Fulton et al., 2013. Science 342, 1214-1217. 4: Lin et al. 2013 Science 339 (6120), 687-690. 5: Ujiie et al., 2013. Science 342, 1211-1214.

Appraisal of marigold flower based lutein as natural colourant for textile dyeing under the influence of gamma radiations

NASA Astrophysics Data System (ADS)

Adeel, Shahid; Gulzar, Tahsin; Azeem, Muhammad; Fazal-ur-Rehman; Saeed, Muhammad; Hanif, Iram; Iqbal, Naeem

2017-01-01

Maintaining colour strength and fastness of the fabrics dyed with natural colourants had been the major constraint of utilizing plant based dyes in modern textile practices. The present study was concerned with the extraction of lutein dye from marigold (Tagetes erecta L.) flowers and role of gamma radiation in improving colour strength and fastness characteristics of the extracted dye. The investigation of dyed fabric in spectraflash showed that gamma ray treatment of 30 kGy was the optimum absorbed dose for surface modification to improve its dye uptake ability. Good colour strength was obtained when irradiated cotton (RC, 30 kGy) was dyed with extract of radiated marigold flower powder (RP) at 70 °C for 85 min, keeping M:L of 1:50 using dye bath of pH 5.0. The results from mordanting experiments revealed that 7% of tannic acid as pre-mordant and 5% of Cu as post-mordant were the best treatments to improve colour strength. It was found that gamma ray induced extraction of lutein from marigold flowers had a potential to be utilized as natural dyes in textile sector to produce yellowish green shades.

Colour change in a structural ornament is related to individual quality, parasites and mating patterns in the blue tit

NASA Astrophysics Data System (ADS)

Badás, E. P.; Martínez, J.; Rivero-de Aguilar, J.; Ponce, C.; Stevens, M.; Merino, S.

2018-02-01

Carry-over effects refer to processes that occur in one season and influence fitness in the following. In birds, two costly activities, namely reproduction and moult, are restricted to a small time window, and sometimes overlap. Thus, colour in newly moulted feathers is likely to be affected by the costs of reproduction. Using models of bird vision we investigated male colour change in a free-living population of blue tits ( Cyanistes caeruleus) in three sampling occasions: spring 1, winter and spring 2. We related crown, tail, breast and cheek feather colouration after the moult (winter) to the intensity of infections by blood parasites during reproduction (spring 1). In the following spring (spring 2), we explored mating patterns with respect to changes in feather colour (springs 1 vs. 2). Males that were less intensely infected by the malaria parasite Plasmodium while breeding showed purer white cheek feathers in winter, which may indicate higher feather quality. Increased brightness in the white cheek was associated with better body condition during reproduction. In the following season, males with brighter cheeks paired with females that had noticeably brighter cheek patches compared to the male's previous mate. These results suggest that the conditions experienced during reproduction are likely to affect moult and thus feather colouration, at least in the white patch. High quality individuals may allocate resources efficiently during reproduction increasing future reproductive success through variation in mating patterns. Carry-over effects from reproduction might extend not only to the non-breeding phase, but also to the following breeding season.

Colour change in a structural ornament is related to individual quality, parasites and mating patterns in the blue tit.

PubMed

Badás, E P; Martínez, J; Rivero-de Aguilar, J; Ponce, C; Stevens, M; Merino, S

2018-02-06

Carry-over effects refer to processes that occur in one season and influence fitness in the following. In birds, two costly activities, namely reproduction and moult, are restricted to a small time window, and sometimes overlap. Thus, colour in newly moulted feathers is likely to be affected by the costs of reproduction. Using models of bird vision we investigated male colour change in a free-living population of blue tits (Cyanistes caeruleus) in three sampling occasions: spring 1, winter and spring 2. We related crown, tail, breast and cheek feather colouration after the moult (winter) to the intensity of infections by blood parasites during reproduction (spring 1). In the following spring (spring 2), we explored mating patterns with respect to changes in feather colour (springs 1 vs. 2). Males that were less intensely infected by the malaria parasite Plasmodium while breeding showed purer white cheek feathers in winter, which may indicate higher feather quality. Increased brightness in the white cheek was associated with better body condition during reproduction. In the following season, males with brighter cheeks paired with females that had noticeably brighter cheek patches compared to the male's previous mate. These results suggest that the conditions experienced during reproduction are likely to affect moult and thus feather colouration, at least in the white patch. High quality individuals may allocate resources efficiently during reproduction increasing future reproductive success through variation in mating patterns. Carry-over effects from reproduction might extend not only to the non-breeding phase, but also to the following breeding season.

A fast passive and planar liquid sample micromixer.

PubMed

Melin, Jessica; Gimenéz, Guillem; Roxhed, Niclas; van der Wijngaart, Wouter; Stemme, Göran

2004-06-01

A novel microdevice for passively mixing liquid samples based on surface tension and a geometrical mixing chamber is presented. Due to the laminar flow regime on the microscale, mixing becomes difficult if not impossible. We present a micromixer where a constantly changing time dependent flow pattern inside a two sample liquid plug is created as the plug simply passes through the planar mixer chamber. The device requires no actuation during mixing and is fabricated using a single etch process. The effective mixing of two coloured liquid samples is demonstrated.

Approaching on Colorimetric Change of Porous Calcareous Rocks Exposed in Urban Environmental Conditions from Iasi - Romania

NASA Astrophysics Data System (ADS)

Pelin, V.; Rusu, O.; Sandu, I.; Vasilache, V.; Gurlui, S.; Sandu, A. V.; Cazacu, M. M.; Sandu, I. G.

2017-06-01

According to the scientific literature, the pollution phenomenon is strongly related by the urban activity from the last decades, with direct effects on the state of conservation of the stone constructions also. This paper presents a preliminary study on the colorimetric evolution of the lithic surfaces exposed under strongly traffic influence from the urban microclimate conditions. The analysed lithic surfaces are similar with the building stone from the structure of an historical monument (from 19th century), such as the Stone Bridge in Iasi-Romania, located in the immediate vicinity of the roadside loop with the same name. The colour change monitoring for the above-mentioned geomaterials aims at anticipating the effects of postponing the decongestion of car traffic and implicitly initiating the assessment of the effects of pollution over this historic monument, which is in an advanced state of deterioration and degradation.

Surface plasmon resonance based selective and sensitive colorimetric determination of azithromycin using unmodified silver nanoparticles in pharmaceuticals and human plasma

NASA Astrophysics Data System (ADS)

Chavada, Vijay D.; Bhatt, Nejal M.; Sanyal, Mallika; Shrivastav, Pranav S.

2017-01-01

In this article we report a novel method for colorimetric sensing and selective determination of a non-chromophoric drug-azithromycin, which lacks native absorbance in the UV-Visible region using unmodified silver nanoparticles (AgNPs). The citrate-capped AgNps dispersed in water afforded a bright yellow colour owing to the electrostatic repulsion between the particles due to the presence of negatively charged surface and showed surface plasmon resonance (SPR) band at 394 nm. Addition of positively charged azithromycin at a concentration as low as 0.2 μM induced rapid aggregation of AgNPs by neutralizing the negative charge on the particle surface. This phenomenon resulted in the colour change from bright yellow to purple which could be easily observed by the naked eye. This provided a simple platform for rapid determination of azithromycin based on colorimetric measurements. The factors affecting the colorimetric response like pH, volume of AgNPs suspension and incubation time were suitably optimized. The validated method was found to work efficiently in the established concentration range of 0.2-100.0 μM using two different calibration models. The selectivity of the method was also evaluated by analysis of nanoparticles-aggregation response upon addition of several anions, cations and some commonly prescribed antibiotics. The method was successfully applied for the analysis of azithromycin in pharmaceuticals and spiked human plasma samples with good accuracy and precision. The simplicity, efficiency and cost-effectiveness of the method hold tremendous potential for the analysis of such non-chromophoric pharmaceuticals.

Bees' subtle colour preferences: how bees respond to small changes in pigment concentration

NASA Astrophysics Data System (ADS)

Papiorek, Sarah; Rohde, Katja; Lunau, Klaus

2013-07-01

Variability in flower colour of animal-pollinated plants is common and caused, inter alia, by inter-individual differences in pigment concentrations. If and how pollinators, especially bees, respond to these small differences in pigment concentration is not known, but it is likely that flower colour variability impacts the choice behaviour of all flower visitors that exhibit innate and learned colour preferences. In behavioural experiments, we simulated varying pigment concentrations and studied its impact on the colour choices of bumblebees and honeybees. Individual bees were trained to artificial flowers having a specific concentration of a pigment, i.e. Acridine Orange or Aniline Blue, and then given the simultaneous choice between three test colours including the training colour, one colour of lower and one colour of higher pigment concentration. For each pigment, two set-ups were provided, covering the range of low to middle and the range of middle to high pigment concentrations. Despite the small bee-subjective perceptual contrasts between the tested stimuli and regardless of training towards medium concentrations, bees preferred neither the training stimuli nor the stimuli offering the highest pigment concentration but more often chose those stimuli offering the highest spectral purity and the highest chromatic contrast against the background. Overall, this study suggests that bees choose an intermediate pigment concentration due to its optimal conspicuousness. It is concluded that the spontaneous preferences of bees for flower colours of high spectral purity might exert selective pressure on the evolution of floral colours and of flower pigmentation.

Spectrophotometric Evaluation of Colour Stability of Nano Hybrid Composite Resin in Commonly Used Food Colourants in Asian Countries.

PubMed

Chittem, Jyothi; Sajjan, Girija S; Varma Kanumuri, Madhu

2017-01-01

There is growing interest in colour stability of aesthetic restorations. So far few studies have been reported. This study was designed to investigate the effects of different common food colourants i.e., Turmeric and Carmoisine (orange red dye) consumed by patients in Asian countries on a recent nano hybrid composite resin. A total of sixty disk shaped specimens measuring 10 mm in diameter and 2 mm in thickness were prepared. The samples were divided into two groups {Z 100 (Dental restorative composite) Filtek Z 250 XT (Nano hybrid universal restorative)}. Baseline colour measurement of all specimens were made using reflectance spectrophotometer with CIE L*a*b* system. Specimens were immersed in artificial saliva and different experimental solutions containing food colourants (carmoisine solution and turmeric solution) for three hours per day at 37°C. Colour measurements were made after 15 days. Colour difference (ΔE*) was calculated. Mean values were compared by one-way analysis of variance (ANOVA). Multiple range test by Tukey Post-hoc test procedure was employed to identify the significant groups at 5% level. Z 100 showed minimum staining capacity when compared to Z 250 XT in both the colourant solutions. The nanohybrid composite resin containing TEGDMA showed significant colour change when compared to that of microhybrid composite resin as a result of staining in turmeric and carmoisine solution.

The Gradual Transformation of Historical Situations: Understanding "Change and Continuity" through Colours and Timelines

ERIC Educational Resources Information Center

Vella, Yosanne

2011-01-01

The small-scale research that Yosanne Vella reports in this article was driven by concern to help pupils develop "big picture" visions of the past and to engage effectively with the idea of change as a process rather than an event. The strategy that she adopts--asking groups of students to colour in a timeline recording their judgement…

Perception of Safety and Liking Associated to the Colour Intervention of Bike Lanes: Contribution from the Behavioural Sciences to Urban Design and Wellbeing

PubMed Central

Vera-Villarroel, Pablo; Contreras, Daniela; Lillo, Sebastián; Segovia, Ariel; Rojo, Natalia; Moreno, Sandra; Oyarzo, Francisco

2016-01-01

The perception of colour and its subjective effects are key issues to designing safe and enjoyable bike lanes. This paper addresses the relationship between the colours of bike lane interventions—in particular pavement painting and intersection design—and the subjective evaluation of liking, visual saliency, and perceived safety related to such an intervention. Utilising images of three real bike lane intersections modified by software to change their colour (five in total), this study recruited 538 participants to assess their perception of all fifteen colour-design combinations. A multivariate analysis of covariance (MANCOVA) with the Bonferroni post hoc test was performed to assess the effect of the main conditions (colour and design) on the dependent variables (liking towards the intervention, level of visual saliency of the intersection, and perceived safety of the bike lane). The results showed that the colour red was more positively associated to the outcome variables, followed by yellow and blue. Additionally, it was observed that the effect of colour widely outweighs the effect of design, suggesting that the right choice and use of colour would increase the effectiveness on bike-lanes pavement interventions. Limitations and future directions are discussed. PMID:27548562

Protection of Historical Wood against Microbial Degradation-Selection and Application of Microbiocides.

PubMed

Koziróg, Anna; Rajkowska, Katarzyna; Otlewska, Anna; Piotrowska, Małgorzata; Kunicka-Styczyńska, Alina; Brycki, Bogumił; Nowicka-Krawczyk, Paulina; Kościelniak, Marta; Gutarowska, Beata

2016-08-22

The aim of this study was to select effective and safe microbiocides for the disinfection and protection of historical wooden surfaces at the former Auschwitz II-Birkenau concentration and extermination camp. We tested seven active compounds against bacteria and moulds, of which didecyldimethylammonium chloride and N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine were effective even at 0.02%-2%. Subsequently, eight microbiocides containing the selected active ingredients were chosen and applied three times on the surface of wood samples colonized by bacteria and moulds. ABM-1 and ABM-2-6% solution; Rocima 101-8%; Preventol R 80-12%; Acticide 706 LV-15% and Boramon-30% were the most effective disinfectants. Under laboratory conditions, ABM-1, Boramon and Rocima 101 ensured antimicrobial protection of new wood samples for six months. In situ, 30% Boramon and 8% Rocima 101 applied by spraying effectively protected the historical wood from bacterial and mould growth for 12 and 3 months, respectively. Colour and luminance of the new wood were not altered after exposure to the biocides. Boramon and Rocima 101, applied by the spraying method, caused no significant change in the colour of the historical wood. Results from this study were used to develop a procedure for the protection of wood in historical buildings against biodeterioration.

How people used ochre at Rose Cottage Cave, South Africa: Sixty thousand years of evidence from the Middle Stone Age

PubMed Central

Wadley, Lyn

2017-01-01

We describe colour, hardness, grain size, geological type and surface modifications of ochre pieces excavated, first by Malan and later by Harper, from the Middle Stone Age (MSA) of Rose Cottage Cave, 96, 000 to 30, 000 years ago. Soft, bright-red shales are abundant, and most ochre has clayey or silty grain sizes. The post-Howiesons Poort layers contain the most ochre pieces, but the Howiesons Poort layers have the highest frequency of ochre per sediment volume. The pre-Howiesons Poort layers have the highest utilization rate. Use-traces include rubbing, grinding, combined grinding and rubbing, and rare instances of scoring. The processing techniques are proxies for ochre use. Rubbing transfers red ochre powder directly onto soft surfaces, such as human skin, or animal hide. This is appropriate when skin colouring and marking or skin protection (for example from sun, insects or bacteria) is the purpose. Grinding produces ochre powder that can be used for a variety of tasks. It can be mixed with water or other products to create paint, cosmetics or adhesives. Multiple uses of ochre powder and ochre pieces are therefore implied at Rose Cottage and changes through time are apparent. PMID:28445491

Protection of Historical Wood against Microbial Degradation—Selection and Application of Microbiocides

PubMed Central

Koziróg, Anna; Rajkowska, Katarzyna; Otlewska, Anna; Piotrowska, Małgorzata; Kunicka-Styczyńska, Alina; Brycki, Bogumił; Nowicka-Krawczyk, Paulina; Kościelniak, Marta; Gutarowska, Beata

2016-01-01

The aim of this study was to select effective and safe microbiocides for the disinfection and protection of historical wooden surfaces at the former Auschwitz II-Birkenau concentration and extermination camp. We tested seven active compounds against bacteria and moulds, of which didecyldimethylammonium chloride and N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine were effective even at 0.02%–2%. Subsequently, eight microbiocides containing the selected active ingredients were chosen and applied three times on the surface of wood samples colonized by bacteria and moulds. ABM-1 and ABM-2—6% solution; Rocima 101—8%; Preventol R 80—12%; Acticide 706 LV—15% and Boramon—30% were the most effective disinfectants. Under laboratory conditions, ABM-1, Boramon and Rocima 101 ensured antimicrobial protection of new wood samples for six months. In situ, 30% Boramon and 8% Rocima 101 applied by spraying effectively protected the historical wood from bacterial and mould growth for 12 and 3 months, respectively. Colour and luminance of the new wood were not altered after exposure to the biocides. Boramon and Rocima 101, applied by the spraying method, caused no significant change in the colour of the historical wood. Results from this study were used to develop a procedure for the protection of wood in historical buildings against biodeterioration. PMID:27556450

HRSCview: a web-based data exploration system for the Mars Express HRSC instrument

NASA Astrophysics Data System (ADS)

Michael, G.; Walter, S.; Neukum, G.

2007-08-01

The High Resolution Stereo Camera (HRSC) on the ESA Mars Express spacecraft has been orbiting Mars since January 2004. By spring 2007 it had returned around 2 terabytes of image data, covering around 35% of the Martian surface in stereo and colour at a resolu-tion of 10-20 m/pixel. HRSCview provides a rapid means to explore these images up to their full resolu-tion with the data-subsetting, sub-sampling, stretching and compositing being carried out on-the-fly by the image server. It is a joint website of the Free University of Berlin and the German Aerospace Center (DLR). The system operates by on-the-fly processing of the six HRSC level-4 image products: the map-projected ortho-rectified nadir pan-chromatic and four colour channels, and the stereo-derived DTM (digital terrain model). The user generates a request via the web-page for an image with several parameters: the centre of the view in surface coordinates, the image resolution in metres/pixel, the image dimensions, and one of several colour modes. If there is HRSC coverage at the given location, the necessary segments are extracted from the full orbit images, resampled to the required resolution, and composited according to the user's choice. In all modes the nadir channel, which has the highest resolu-tion, is included in the composite so that the maximum detail is always retained. The images are stretched ac-cording to the current view: this applies to the eleva-tion colour scale, as well as the nadir brightness and the colour channels. There are modes for raw colour, stretched colour, enhanced colour (exaggerated colour differences), and a synthetic 'Mars-like' colour stretch. A colour ratio mode is given as an alternative way to examine colour differences (R=IR/R, G=R/G and B=G/B). The final image is packaged as a JPEG file and returned to the user over the web. Each request requires approximately 1 second to process. A link is provided from each view to a data product page, where header items describing the full map-projected science data product are displayed, and a direct link to the archived data products on the ESA Planetary Science Archive (PSA) is provided. At pre-sent the majority of the elevation composites are de-rived from the HRSC Preliminary 200m DTMs gener-ated at the German Aerospace Center (DLR), which will not be available as separately downloadable data products. These DTMs are being progressively super-seded by systematically generated higher resolution archival DTMs, also from DLR, which will become available for download through the PSA, and be simi-larly accessible via HRSCview. At the time of writing this abstract (May 2007), four such high resolution DTMs are available for download via the HRSCview data product pages (for images from orbits 0572, 0905, 1004, and 2039).

Condition-dependence, pleiotropy and the handicap principle of sexual selection in melanin-based colouration.

PubMed

Roulin, Alexandre

2016-05-01

The signalling function of melanin-based colouration is debated. Sexual selection theory states that ornaments should be costly to produce, maintain, wear or display to signal quality honestly to potential mates or competitors. An increasing number of studies supports the hypothesis that the degree of melanism covaries with aspects of body condition (e.g. body mass or immunity), which has contributed to change the initial perception that melanin-based colour ornaments entail no costs. Indeed, the expression of many (but not all) melanin-based colour traits is weakly sensitive to the environment but strongly heritable suggesting that these colour traits are relatively cheap to produce and maintain, thus raising the question of how such colour traits could signal quality honestly. Here I review the production, maintenance and wearing/displaying costs that can generate a correlation between melanin-based colouration and body condition, and consider other evolutionary mechanisms that can also lead to covariation between colour and body condition. Because genes controlling melanic traits can affect numerous phenotypic traits, pleiotropy could also explain a linkage between body condition and colouration. Pleiotropy may result in differently coloured individuals signalling different aspects of quality that are maintained by frequency-dependent selection or local adaptation. Colouration may therefore not signal absolute quality to potential mates or competitors (e.g. dark males may not achieve a higher fitness than pale males); otherwise genetic variation would be rapidly depleted by directional selection. As a consequence, selection on heritable melanin-based colouration may not always be directional, but mate choice may be conditional to environmental conditions (i.e. context-dependent sexual selection). Despite the interest of evolutionary biologists in the adaptive value of melanin-based colouration, its actual role in sexual selection is still poorly understood. © 2015 Cambridge Philosophical Society.

Theoretical colours and isochrones for some Hubble Space Telescope colour systems

NASA Technical Reports Server (NTRS)

Edvardsson, B.; Bell, R. A.

1989-01-01

Synthetic spectra for effective temperatures of 4000-7250 K, logarithmic surface gravities typical of dwarfs and subgiants, and metallicities from solar values to 0.001 of the solar metallicity were used to derive a grid of synthetic surface brightness magnitudes for 21 of the Hubble Space Telescope Wide Field Camera (WFC) band passes. The absolute magnitudes of these 21 band passes are also obtained for a set of globular cluster isochrones with different helium abundances, metallicities, oxygen abundances, and ages. The usefulness and efficiency of different sets of broad and intermediate bandwidth WFC colors for determining ages and metallicities for globular clusters are evaluated.

Are There High Meteorite Concentrations in the Atacama Desert/Chile?

NASA Astrophysics Data System (ADS)

Scherer, P.; Delisle, G.

1992-07-01

We have visited numerous regions of the Atacama desert between Copiapo (27 degrees, 15'S) and Calama (22 degrees, 25'S) to assess their potential as a high-yield meteorite concentration surface, easily exploitable by search efforts within a reasonable time frame. According to our observations, this desert is characterized by the following features: a) A high percentage of the desert consists of sloping surfaces on which soil movement occurs, presumably by very infrequent, though heavy rain. b) Vast areas of the desert are covered by a dm-thick sand layer of dark colour. Since the sand is too coarse-grained to be transported by wind it presumably resulted from in-situ weathering of rock debris derived from nearby mountains. We suspect that impacting smaller objects can easily penetrate the sand layer. c) The sand layer is typically dotted by rocks, fist-size or smaller, that are covered by a thick layer of desert paint (reddish-brown to black colour). Most country rocks are of volcanic origin (rhyolite, andesite, basalt) and are typically of grey to black colour. A noticeable colour contrast in particular to potential stony meteorites is almost nonexistent. d) Soil salts with a potential to speed up weathering processes are ubiquitous near the surface. e) The Pampa de Mejillones, 45 km north of Antofagasta, is one of the few light-coloured areas in the Atacama desert. The surface, being of Mio-Pliocene age, consists of an almost continuous layer of light-brown fossil shells (bivalves and gastropodes). Fluvially transported dark rocks from adjacent outcrops rest on top. The latter material is covered again by desert paint. Few meteorite discoveries have been reported from this area (Pampa (a),(b),(c)). f) Numerous old tire tracks, in particular around mines in operation, crisscross most areas of the Atacama. Undetected objects such as large masses of iron bodies are not likely to have remained undiscovered in great numbers any more. We conclude that the potential of the Atacama desert for a successful meteorite search is rather low in comparison to other deserts such as the Nullarbor Plain, Australia (Bevan and Binns, 1989), or the Acfer region, Algeria (Otto, 1992). We will demonstrate the vastly different surface conditions of areas with meteorite concentrations from these three localities. References: Bevan A.W.R. and Binns R.A. (1989) Meteoritics 24, 127. Otto J. (1992) Chem. Erde 52, 33.

The use of colour indicator as a smart packaging system for evaluating mangoes Arummanis (Mangifera indica L. var. Arummanisa) freshness

NASA Astrophysics Data System (ADS)

Dirpan, A.; Latief, R.; Syarifuddin, A.; Rahman, A. N. F.; Putra, R. P.; Hidayat, S. H.

2018-05-01

The high demand and public sensitivity of packaging products need the emergence of various packaging for fresh fruit and vegetables. One of the packaging that can be applied is smart packaging. The aimed of this study was to make smart packaging indicator that can be applied to mangoes. The benefits of this research were to facilitate the consumer to know the quality of the fruit and to promote in choosing the fruit according to freshness or desired maturity without damaging the packaging. The research was carried out in the following two stages: preparation of solution as bacterial growth medium Acetobacter xylinum, (incubated for 14 days) and making colour indicator and application to smart packaging. The results showed that long immersion of bacterial cellulose with bromophenol blue solution was 24 hours and temperature of ± 30 °C. The colour indicator that has been applied to the packaging changed from blue to green colour for over-ripe product, which can be visible to the naked eye. The colour change of the indicators reflects the pH of the mango packaging. It was also in similar trends to the change of several parameters (total acid, and soluble solids content (SSC)) that was typically used to characterize the freshness of mango. In general, this indicator can be used as smart packaging.

Purple anthocyanin colouration on lower (abaxial) leaf surface of Hemigraphis colorata (Acanthaceae).

PubMed

Skaar, Irene; Adaku, Christopher; Jordheim, Monica; Byamukama, Robert; Kiremire, Bernard; Andersen, Øyvind M

2014-09-01

The functional significance of anthocyanin colouration of lower (abaxial) leaf surfaces is not clear. Two anthocyanins, 5-O-methylcyanidin 3-O-(3″-(β-glucuronopyranosyl)-β-glucopyranoside) (1) and 5-O-methylcyanidin 3-O-β-glucopyranoside (2), were isolated from Hemigraphis colorata (Blume) (Acanthaceae) leaves with strong purple abaxial colouration (2.2 and 0.6mg/gfr.wt., respectively). The glycosyl moiety of 1, the disaccharide 3″-(β-glucuronopyranosyl)-β-glucopyranoside), has previously been reported to occur only in a triterpenoid saponin, lindernioside A. The structural assignment of the aglycone of 1 and 2 is the first complete characterisation of a natural 7-hydroxy-5-methoxyanthocyanidin. Compared to nearly all naturally occurring anthocyanidins, the 5-O-methylation of this anthocyanidin limits the type of possible quinoidal forms of 1 and 2 to be those forms with keto-function in only their 7- and 4'-positions. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Dynamic structural colour using vanadium dioxide thin films

NASA Astrophysics Data System (ADS)

Wilson, K.; Marocico, C. A.; Bradley, A. L.

2018-06-01

A thin film stack consisting of layers of indium tin oxide (ITO) with an intermediate vanadium oxide (VO2) layer on an optically thick silver film has been investigated for dynamic structural colour. The structure benefits from the phase change properties of VO2. Compared with other phase change materials, such as germanium antimony telluride (GST), VO2 can be offered as a lower power consumption alternative. It has been overlooked in the visible spectral range due to its smaller refractive index change below 700 nm. We demonstrate that the sensitivity of the visible reflectance spectrum to the change in phase of a 30 nm VO2 layer is increased after it is incorporated in a thin film stack, with performance comparable to other phase change materials. The extent to which dynamic tuning of the reflectance spectra of ITO–VO2–ITO–Ag thin film stacks can be exploited for colour switching is reported, with approximately 25% change in reflectance demonstrated at 550 nm. Inclusion of a top ITO layer is also shown to improve the chromaticity change on phase transition.

The effect of warp tension on the colour of jacquard fabric made with different weaves structures

NASA Astrophysics Data System (ADS)

Karnoub, A.; Kadi, N.; Holmudd, O.; Peterson, J.; Skrifvars, M.

2017-10-01

The aims of this paper is to demonstrate the effect of warp tension on fabric colour for several types of weaves structures, and found a relationship between them. The image analyse technique used to determine the proportion of yarns colour appearance, the advantage of this techniques is the rapidity and reliability. The woven fabric samples are consisting of a polyester warp yarn with continuous filaments and density of 33 end/cm, a polypropylene weft yarn with a density of 24 pick/cm, and the warp tension ranged between 12-22 cN/tex. The experimental results demonstrated the effect of the warp tension on the colour of fabric, and this effect is related to several factors, where the large proportion of warp appearance leads to larger effect on fabric colour. The difference in the value of colour differences ΔEcmc is larger is in the range 16 to 20 cN/tex of warp tension. Using statistical methods, a mathematical model to calculate the amount of the colour difference ΔEcmc caused by the change in warp tension had been proposed.

Role of high molecular mass organics in colour formation during biological treatment of pulp and paper wastewater.

PubMed

Milestone, C B; Stuthridge, T R; Fulthorpe, R R

2007-01-01

This paper forms part of series of biological treatment colour behaviour studies. Surveys across a range of mills have observed colour increases in aerated stabilisation basins of 20-45%. Much of the colour formation has been demonstrated to occur in high molecular mass effluent organic constituents (HMM) present in bleach plant effluents. Removing material greater than 3000 Da essentially eliminated the colour forming ability in both E and D stage wastewaters. We have also shown that pulp and paper sludges contain anaerobic bacteria capable of reducing humic like materials. Colour formation was correlated to the anoxic conditions and the availability of readily biodegradable organic constituents during the wastewater treatment process. Overall, these studies suggest that colour formation in pulp and paper biological treatment systems may be caused by anaerobic bacteria using HMM material from the bleaching effluents as an electron acceptor for growth. This leads to the reduction of the material, which in turn leads to non-reversible internal changes, such as intra-molecular polymerisation or formation of chromophoric functional groups.

Photonic crystals cause active colour change in chameleons

PubMed Central

Teyssier, Jérémie; Saenko, Suzanne V.; van der Marel, Dirk; Milinkovitch, Michel C.

2015-01-01

Many chameleons, and panther chameleons in particular, have the remarkable ability to exhibit complex and rapid colour changes during social interactions such as male contests or courtship. It is generally interpreted that these changes are due to dispersion/aggregation of pigment-containing organelles within dermal chromatophores. Here, combining microscopy, photometric videography and photonic band-gap modelling, we show that chameleons shift colour through active tuning of a lattice of guanine nanocrystals within a superficial thick layer of dermal iridophores. In addition, we show that a deeper population of iridophores with larger crystals reflects a substantial proportion of sunlight especially in the near-infrared range. The organization of iridophores into two superposed layers constitutes an evolutionary novelty for chameleons, which allows some species to combine efficient camouflage with spectacular display, while potentially providing passive thermal protection. PMID:25757068

Radiochromic 3D Detectors

NASA Astrophysics Data System (ADS)

Oldham, Mark

2015-01-01

Radiochromic materials exhibit a colour change when exposed to ionising radiation. Radiochromic film has been used for clinical dosimetry for many years and increasingly so recently, as films of higher sensitivities have become available. The two principle advantages of radiochromic dosimetry include greater tissue equivalence (radiologically) and the lack of requirement for development of the colour change. In a radiochromic material, the colour change arises direct from ionising interactions affecting dye molecules, without requiring any latent chemical, optical or thermal development, with important implications for increased accuracy and convenience. It is only relatively recently however, that 3D radiochromic dosimetry has become possible. In this article we review recent developments and the current state-of-the-art of 3D radiochromic dosimetry, and the potential for a more comprehensive solution for the verification of complex radiation therapy treatments, and 3D dose measurement in general.

From silk to satellite: half a century of ocean colour anomalies in the Northeast Atlantic.

PubMed

Raitsos, Dionysios E; Pradhan, Yaswant; Lavender, Samantha J; Hoteit, Ibrahim; McQuatters-Gollop, Abigail; Reid, Phillip C; Richardson, Anthony J

2014-07-01

Changes in phytoplankton dynamics influence marine biogeochemical cycles, climate processes, and food webs, with substantial social and economic consequences. Large-scale estimation of phytoplankton biomass was possible via ocean colour measurements from two remote sensing satellites - the Coastal Zone Colour Scanner (CZCS, 1979-1986) and the Sea-viewing Wide Field-of-view Sensor (SeaWiFS, 1998-2010). Due to the large gap between the two satellite eras and differences in sensor characteristics, comparison of the absolute values retrieved from the two instruments remains challenging. Using a unique in situ ocean colour dataset that spans more than half a century, the two satellite-derived chlorophyll-a (Chl-a) eras are linked to assess concurrent changes in phytoplankton variability and bloom timing over the Northeast Atlantic Ocean and North Sea. Results from this unique re-analysis reflect a clear increasing pattern of Chl-a, a merging of the two seasonal phytoplankton blooms producing a longer growing season and higher seasonal biomass, since the mid-1980s. The broader climate plays a key role in Chl-a variability as the ocean colour anomalies parallel the oscillations of the Northern Hemisphere Temperature (NHT) since 1948. © 2013 John Wiley & Sons Ltd.

Mechanism of variable structural colour in the neon tetra: quantitative evaluation of the Venetian blind model.

PubMed

Yoshioka, S; Matsuhana, B; Tanaka, S; Inouye, Y; Oshima, N; Kinoshita, S

2011-01-06

The structural colour of the neon tetra is distinguishable from those of, e.g., butterfly wings and bird feathers, because it can change in response to the light intensity of the surrounding environment. This fact clearly indicates the variability of the colour-producing microstructures. It has been known that an iridophore of the neon tetra contains a few stacks of periodically arranged light-reflecting platelets, which can cause multilayer optical interference phenomena. As a mechanism of the colour variability, the Venetian blind model has been proposed, in which the light-reflecting platelets are assumed to be tilted during colour change, resulting in a variation in the spacing between the platelets. In order to quantitatively evaluate the validity of this model, we have performed a detailed optical study of a single stack of platelets inside an iridophore. In particular, we have prepared a new optical system that can simultaneously measure both the spectrum and direction of the reflected light, which are expected to be closely related to each other in the Venetian blind model. The experimental results and detailed analysis are found to quantitatively verify the model.

Developing an effective means to reduce 5-hydroxymethyl-2-furfural from caramel colour.

PubMed

Guan, Yongguang; Chen, Mingshun; Yu, Shujuan; Tang, Qiang; Yan, He

2014-01-15

Supercritical carbon dioxide fluid extraction was used to extract 5-hydroxymethyl-2-furfural from caramel colour (solid content was about 75%). The procedure was carried out by response surface methodology using a quadratic polynomial model. Extraction pressure, time, temperature and ethanol content were selected as the independent variables. Conditions to obtain the highest extraction ratio of 5-hydroxymethyl-2-furfural were determined to be an extraction pressure of 21.65MPa, time of 46.7min, temperature of 35°C and 70% ethanol content of caramel colour. The predicted 5-hydroxymethyl-2-furfural extraction ratio was 87.42%. Under the conditions stated above, the experimental value of 5-hydroxymethyl-2-furfural extraction ratio was 86.98%, which was similar to the predicted value by the model. This study indicated that supercritical carbon dioxide fluid extraction can effectively reduce 5-hydroxymethyl-2-furfural from caramel colour, which can help food industry to improve the safety of the food material, as well as provide more healthy caramel colour for human beings. Copyright © 2013 Elsevier Ltd. All rights reserved.

[Color processing of ultrasonographic images in extracorporeal lithotripsy].

PubMed

Lardennois, B; Ziade, A; Walter, K

1991-02-01

A number of technical difficulties are encountered in the ultrasonographic detection of renal stones which unfortunately limit its performance. The margin of error of firing in extracorporeal shock-wave lithotripsy (ESWL) must be reduced to a minimum. The role of the ultrasonographic monitoring during lithotripsy is also essential: continuous control of the focussing of the short-wave beamand assessment if the quality of fragmentation. The authors propose to improve ultrasonographic imaging in ESWL by means of intraoperative colour processing of the stone. Each shot must be directed to its target with an economy of vision avoiding excessive fatigue. The principle of the technique consists of digitalization of the ultrasound video images using a Macintosh Mac 2 computer. The Graphis Paint II program is interfaced directly with the Quick Capture card and recovers the images on its work surface in real time. The program is then able to attribute to each of these 256 shades of grey any one of the 16.6 million colours of the Macintosh universe with specific intensity and saturation. During fragmentation, using the principle of a palette, the stone changes colour from green to red indicating complete fragmentation. A Color Space card converts the digital image obtained into a video analogue source which is visualized on the monitor. It can be superimposed and/or juxtaposed with the source image by means of a multi-standard mixing table. Colour processing of ultrasonographic images in extracoporeal shockwave lithotripsy allows better visualization of the stones and better follow-up of fragmentation and allows the shockwave treatment to be stopped earlier. It increases the stone-free performance at 6 months. This configuration will eventually be able to integrate into the ultrasound apparatus itself.

3D documentation and visualization of external injury findings by integration of simple photography in CT/MRI data sets (IprojeCT).

PubMed

Campana, Lorenzo; Breitbeck, Robert; Bauer-Kreuz, Regula; Buck, Ursula

2016-05-01

This study evaluated the feasibility of documenting patterned injury using three dimensions and true colour photography without complex 3D surface documentation methods. This method is based on a generated 3D surface model using radiologic slice images (CT) while the colour information is derived from photographs taken with commercially available cameras. The external patterned injuries were documented in 16 cases using digital photography as well as highly precise photogrammetry-supported 3D structured light scanning. The internal findings of these deceased were recorded using CT and MRI. For registration of the internal with the external data, two different types of radiographic markers were used and compared. The 3D surface model generated from CT slice images was linked with the photographs, and thereby digital true-colour 3D models of the patterned injuries could be created (Image projection onto CT/IprojeCT). In addition, these external models were merged with the models of the somatic interior. We demonstrated that 3D documentation and visualization of external injury findings by integration of digital photography in CT/MRI data sets is suitable for the 3D documentation of individual patterned injuries to a body. Nevertheless, this documentation method is not a substitution for photogrammetry and surface scanning, especially when the entire bodily surface is to be recorded in three dimensions including all external findings, and when precise data is required for comparing highly detailed injury features with the injury-inflicting tool.

Comparative Studies on Dyeability with Direct, Acid and Reactive Dyes after Chemical Modification of Jute with Mixed Amino Acids Obtained from Extract of Waste Soya Bean Seeds

NASA Astrophysics Data System (ADS)

Bhaumik, Nilendu Sekhar; Konar, Adwaita; Roy, Alok Nath; Samanta, Ashis Kumar

2017-12-01

Jute fabric was treated with mixed natural amino acids obtained from waste soya bean seed extract for chemical modification of jute for its cataionization and to enhance its dyeability with anionic dyes (like direct, reactive and acid dye) as well enabling soya modified jute for salt free dyeing with anionic reactive dyes maintaining its eco-friendliness. Colour interaction parameters including surface colour strength were assessed and compared for both bleached and soya-modified jute fabric for reactive dyeing and compared with direct and acid dye. Improvement in K/S value (surface colour strength) was observed for soya-modified jute even in absence of salt applied in dye bath for reactive dyes as well as for direct and acid dyes. In addition, reactive dye also shows good dyeability even in acid bath in salt free conditions. Colour fastness to wash was evaluated for bleached and soya-modified jute fabric after dyeing with direct, acid and reactive dyes are reported. Treatment of jute with soya-extracted mixed natural amino acids showed anchoring of some amino/aldemine groups on jute cellulosic polymer evidenced from Fourier Transform Infra-Red (FTIR) Spectroscopy. This amino or aldemine group incorporation in bleached jute causes its cationization and hence when dyed in acid bath for reactive dye (instead of conventional alkali bath) showed dye uptake for reactive dyes. Study of surface morphology by Scanning Electron Microscopy (SEM) of said soya-modified jute as compared to bleached jute was studied and reported.

Optical properties of zirconium oxynitride films: The effect of composition, electronic and crystalline structures

NASA Astrophysics Data System (ADS)

Carvalho, P.; Borges, J.; Rodrigues, M. S.; Barradas, N. P.; Alves, E.; Espinós, J. P.; González-Elipe, A. R.; Cunha, L.; Marques, L.; Vasilevskiy, M. I.; Vaz, F.

2015-12-01

This work is devoted to the investigation of zirconium oxynitride (ZrOxNy) films with varied optical responses prompted by the variations in their compositional and structural properties. The films were prepared by dc reactive magnetron sputtering of Zr, using Ar and a reactive gas mixture of N2 + O2 (17:3). The colour of the films changed from metallic-like, very bright yellow-pale and golden yellow, for low gas flows to red-brownish for intermediate gas flows. Associated to this colour change there was a significant decrease of brightness. With further increase of the reactive gas flow, the colour of the samples changed from red-brownish to dark blue or even to interference colourations. The variations in composition disclosed the existence of four different zones, which were found to be closely related with the variations in the crystalline structure. XRD analysis revealed the change from a B1 NaCl face-centred cubic zirconium nitride-type phase for films prepared with low reactive gas flows, towards a poorly crystallized over-stoichiometric nitride phase, which may be similar to that of Zr3N4 with some probable oxygen inclusions within nitrogen positions, for films prepared with intermediate reactive gas flows. For high reactive gas flows, the films developed an oxynitride-type phase, similar to that of γ-Zr2ON2 with some oxygen atoms occupying some of the nitrogen positions, evolving to a ZrO2 monoclinic type structure within the zone where films were prepared with relatively high reactive gas flows. The analysis carried out by reflected electron energy loss spectroscopy (REELS) revealed a continuous depopulation of the d-band and an opening of an energy gap between the valence band (2p) and the Fermi level close to 5 eV. The ZrN-based coatings (zone I and II) presented intrinsic colourations, with a decrease in brightness and a colour change from bright yellow to golden yellow, red brownish and dark blue. Associated to these changes, there was also a shift of the reflectivity minimum to lower energies, with the increase of the non-metallic content. The samples lying in the two last zones (zone III, oxynitride and zone IV, oxide films) revealed a typical semi-transparent-optical behaviour showing interference-like colourations only due to the complete depopulation of the d band at the Fermi level. The samples lying in these zones presented also an increase of the optical bandgap from 2 to 3.6 eV.

Colour preference between adults and children during a dental treatment session.

PubMed

Oner Ozdas, Didem; Kazak, Magrur

2017-02-01

It is evidently shown that colour has physical, psychological and sociological effects on human beings. There are many studies showing the effects of colours on brain activity. Colour preferences may change from childhood to adulthood and are significantly different in various age groups. The aim of this study was to evaluate the adults and children in their preference for mouthrinses in various colours under stress condition during a dental treatment session. 240 adults and 263 children were included in the study. Three transparent cups were filled with water, two of which were coloured green/pink rinsing by dissolving a tablet in the water. Cups were placed near the dental unit. During dental treatment sessions, patients were told to rinse their mouth with whichever cup they preferred. Preferred colour of cup, gender and age of patient, number of sessions were recorded. Data were statistically analysed by SPSS 15.0 programme and chi-square tests. Half of all cases preferred water. In adults, while females statistically significantly preferred water, males chose cups with coloured contents (p<0.01). Male adults preferred more than one rinsing solution in a dental treatment session. Children mostly preferred water. Even if adults preferred cups with coloured contents in multi-dental treatment sessions, children regularly preferred water (p<0.001). Female and male children mostly preferred water as a rinsing solution. Water was the most often choice for all patients. Both patients' gender and colours of cups affected choices made by adults and children. Female adults and children were not interested in trying colourful mouthrinses, while male adults were curious about trying colourful mouthrinses during dental treatment sessions under stress condition. Copyright © 2016 Elsevier Inc. All rights reserved.

Dynamic camouflage by Nassau groupers Epinephelus striatus on a Caribbean coral reef.

PubMed

Watson, A C; Siemann, L A; Hanlon, R T

2014-11-01

This field study describes the camouflage pattern repertoire, associated behaviours and speed of pattern change of Nassau groupers Epinephelus striatus at Little Cayman Island, British West Indies. Three basic camouflaged body patterns were observed under natural conditions and characterized quantitatively. The mean speed of pattern change across the entire body was 4.44 s (range = 0.97-9.87 s); the fastest pattern change as well as contrast change within a fixed pattern occurred within 1 s. Aside from apparent defensive camouflage, E. striatus used camouflage offensively to approach crustacean or fish prey, and three successful predation events were recorded. Although animal camouflage is a widespread tactic, dynamic camouflage is relatively uncommon and has been studied rarely in marine teleosts under natural conditions. The rapid changes observed in E. striatus suggest direct neural control of some skin colouration elements, and comparative studies of functional morphology and behaviour of colour change in other coral-reef teleosts are likely to reveal new mechanisms and adaptations of dynamic colouration. © 2014 The Fisheries Society of the British Isles.

Iridescent cellulose nanocrystal films: the link between structural colour and Bragg’s law

NASA Astrophysics Data System (ADS)

Nguyen, Thanh-Dinh; Sierra, Egoitz; Eguiraun, Harkaitz; Lizundia, Erlantz

2018-07-01

Structural colour is a phenomenon found in nature, which provides plants and animals with vibrant optical properties. The production of this colour is based on the interaction of incident light with the hierarchical organisation of submicron- and micron-sized layered structures. Cellulose nanocrystals (CNCs) are anisotropic building units formed by acid hydrolysis of native cellulose microfibers, which can disperse in aqueous media to form a photonic liquid crystal. One fascinating example of the appearance of biomimetic colour is the supramolecular assembly of CNCs into iridescent layered structures that rotate along a helical screw to yield a long-range chiral nematic order. A quick, simple and engaging experiment that allows the establishment of a direct relation between the structural colour and underlying mechanism of the light interaction with these hierarchically structured materials is reported. The obtained colour changes are explained within the theoretical framework provided by Bragg’s law and may provide an easy way to observe the macroscopic manifestation of this often abstract concept.

Optimisation of an oak chips-grape mix maceration process. Influence of chip dose and maceration time.

PubMed

Gordillo, Belén; Baca-Bocanegra, Berta; Rodriguez-Pulído, Francisco J; González-Miret, M Lourdes; García Estévez, Ignacio; Quijada-Morín, Natalia; Heredia, Francisco J; Escribano-Bailón, M Teresa

2016-09-01

Oak chips-related phenolics are able to modify the composition of red wine and modulate the colour stability. In this study, the effect of two maceration techniques, traditional and oak chips-grape mix process, on the phenolic composition and colour of Syrah red wines from warm climate was studied. Two doses of oak chips (3 and 6g/L) at two maceration times (5 and 10days) during fermentation was considered. Changes on phenolic composition (HPLC-DAD-MS), copigmentation/polymerisation (spectrophotometry), and colour (Tristimulus and Differential Colorimetry) were assessed by multivariate statistical techniques. The addition of oak chips at shorter maceration times enhanced phenolic extraction, colour and its stabilisation in comparison to the traditional maceration. On contrast, increasing chip dose in extended maceration time resulted in wines with lighter and less stable colour. Results open the possibility of optimise alternative technological applications to traditional grape maceration for avoiding the common loss of colour of wines from warm climate. Copyright © 2016 Elsevier Ltd. All rights reserved.

System-dependent regulations of colour-pattern development: a mutagenesis study of the pale grass blue butterfly

PubMed Central

Iwata, Masaki; Hiyama, Atsuki; Otaki, Joji M.

2013-01-01

Developmental studies on wing colour patterns have been performed in nymphalid butterflies, but efficient genetic manipulations, including mutagenesis, have not been well established. Here, we have performed mutagenesis experiments in a lycaenid butterfly, the pale grass blue Zizeeria maha, to produce colour-pattern mutants. We fed the P-generation larvae an artificial diet containing the mutagen ethyl methane sulfonate (EMS), and the F1- and F2-generation adults showed various aberrant colour patterns: dorsoventral transformation, anterioposterior background colouration gap, weak contrast, disarrangement of spots, reduction of the size of spots, loss of spots, fusion of spots, and ectopic spots. Among them, the disarrangement, reduction, and loss of spots were likely produced by the coordinated changes of many spots of a single wing around the discal spot in a system-dependent manner, demonstrating the existence of the central symmetry system. The present study revealed multiple genetic regulations for system-dependent and wing-wide colour-pattern determination in lycaenid butterflies. PMID:23917124

Flattening and surface-brightness of the fast-rotating star δ Persei with the visible VEGA/CHARA interferometer

NASA Astrophysics Data System (ADS)

Challouf, M.; Nardetto, N.; Domiciano de Souza, A.; Mourard, D.; Tallon-Bosc, I.; Aroui, H.; Farrington, C.; Ligi, R.; Meilland, A.; Mouelhi, M.

2017-08-01

Context. Rapid rotation is a common feature for massive stars, with important consequences on their physical structure, flux distribution and evolution. Fast-rotating stars are flattened and show gravity darkening (non-uniform surface intensity distribution). Another important and less studied impact of fast-rotation in early-type stars is its influence on the surface brightness colour relation (hereafter SBCR), which could be used to derive the distance of eclipsing binaries. Aims: The purpose of this paper is to determine the flattening of the fast-rotating B-type star δ Per using visible long-baseline interferometry. A second goal is to evaluate the impact of rotation and gravity darkening on the V - K colour and surface brightness of the star. Methods: The B-type star δ Per was observed with the VEGA/CHARA interferometer, which can measure spatial resolutions down to 0.3 mas and spectral resolving power of 5000 in the visible. We first used a toy model to derive the position angle of the rotation axis of the star in the plane of the sky. Then we used a code of stellar rotation, CHARRON, in order to derive the physical parameters of the star. Finally, by considering two cases, a static reference star and our best model of δ Per, we can quantify the impact of fast rotation on the surface brightness colour relation (SBCR). Results: We find a position angle of 23 ± 6 degrees. The polar axis angular diameter of δ Per is θp = 0.544 ± 0.007 mas, and the derived flatness is r = 1.121 ± 0.013. We derive an inclination angle for the star of I = 85+ 5-20 degrees and a projected rotation velocity Vsini = 175+ 8-11 km s-1 (or 57% of the critical velocity). We find also that the rotation and inclination angle of δ Per keeps the V - K colour unchanged while it decreasing its surface-brightness by about 0.05 mag. Conclusions: Correcting the impact of rotation on the SBCR of early-type stars appears feasible using visible interferometry and dedicated models.

Effects of background, direction and intensity of ambient light, measuring position, and adjacent teeth, on anterior tooth colour measurement in vitro.

PubMed

Ma, Jian Feng; Du, Ruo Xi; Wang, Si Qian; Li, Yi Ming

2010-01-01

to investigate the effects of different background colours (black, white or pink), direction and intensity of ambient light, measuring position, and the adjacent teeth, on the in vitro colour measurement of maxillary anterior teeth, using the Minolta CR-321 colorimeter. ten extracted human maxillary central incisors were selected. A fibre-optic light MI-150 was used as the ambient illuminant. Teeth were irradiated from a 3- or 12-o'clock direction. L*a*b* values of seven sites on the labial surfaces were obtained by means of the Minolta CR-321 colorimeter, using three background colours, with or without the adjacent teeth. The recorded data were analysed with two-tailed Student t tests and analysis of variance (α = 0.05). the ambient light did not affect the colour measurement of anterior teeth, regardless of the presence or absence of the adjacent teeth. There were no statistically significant differences in L*a*b* values at the same position under different background colours, except ΔE12 (colour difference between site 1 and site 2) between black and white backgrounds. ΔE12 (under black background), ΔE13 and ΔE15 were greater than 1.5, while the others were lower than 1.5. the background, ambient light and the presence of adjacent teeth did not affect the colour measurement of anterior teeth using the Minolta CR-321 colorimeter in vitro. The inherent disadvantages of using the naked eye during clinical visual shade assessment may be overcome by the colorimeter.

Discriminant Analysis of Defective and Non-Defective Field Pea (Pisum sativum L.) into Broad Market Grades Based on Digital Image Features.

PubMed

McDonald, Linda S; Panozzo, Joseph F; Salisbury, Phillip A; Ford, Rebecca

2016-01-01

Field peas (Pisum sativum L.) are generally traded based on seed appearance, which subjectively defines broad market-grades. In this study, we developed an objective Linear Discriminant Analysis (LDA) model to classify market grades of field peas based on seed colour, shape and size traits extracted from digital images. Seeds were imaged in a high-throughput system consisting of a camera and laser positioned over a conveyor belt. Six colour intensity digital images were captured (under 405, 470, 530, 590, 660 and 850nm light) for each seed, and surface height was measured at each pixel by laser. Colour, shape and size traits were compiled across all seed in each sample to determine the median trait values. Defective and non-defective seed samples were used to calibrate and validate the model. Colour components were sufficient to correctly classify all non-defective seed samples into correct market grades. Defective samples required a combination of colour, shape and size traits to achieve 87% and 77% accuracy in market grade classification of calibration and validation sample-sets respectively. Following these results, we used the same colour, shape and size traits to develop an LDA model which correctly classified over 97% of all validation samples as defective or non-defective.

Discriminant Analysis of Defective and Non-Defective Field Pea (Pisum sativum L.) into Broad Market Grades Based on Digital Image Features

PubMed Central

McDonald, Linda S.; Panozzo, Joseph F.; Salisbury, Phillip A.; Ford, Rebecca

2016-01-01

Field peas (Pisum sativum L.) are generally traded based on seed appearance, which subjectively defines broad market-grades. In this study, we developed an objective Linear Discriminant Analysis (LDA) model to classify market grades of field peas based on seed colour, shape and size traits extracted from digital images. Seeds were imaged in a high-throughput system consisting of a camera and laser positioned over a conveyor belt. Six colour intensity digital images were captured (under 405, 470, 530, 590, 660 and 850nm light) for each seed, and surface height was measured at each pixel by laser. Colour, shape and size traits were compiled across all seed in each sample to determine the median trait values. Defective and non-defective seed samples were used to calibrate and validate the model. Colour components were sufficient to correctly classify all non-defective seed samples into correct market grades. Defective samples required a combination of colour, shape and size traits to achieve 87% and 77% accuracy in market grade classification of calibration and validation sample-sets respectively. Following these results, we used the same colour, shape and size traits to develop an LDA model which correctly classified over 97% of all validation samples as defective or non-defective. PMID:27176469

Robust foreground detection: a fusion of masked grey world, probabilistic gradient information and extended conditional random field approach.

PubMed

Zulkifley, Mohd Asyraf; Moran, Bill; Rawlinson, David

2012-01-01

Foreground detection has been used extensively in many applications such as people counting, traffic monitoring and face recognition. However, most of the existing detectors can only work under limited conditions. This happens because of the inability of the detector to distinguish foreground and background pixels, especially in complex situations. Our aim is to improve the robustness of foreground detection under sudden and gradual illumination change, colour similarity issue, moving background and shadow noise. Since it is hard to achieve robustness using a single model, we have combined several methods into an integrated system. The masked grey world algorithm is introduced to handle sudden illumination change. Colour co-occurrence modelling is then fused with the probabilistic edge-based background modelling. Colour co-occurrence modelling is good in filtering moving background and robust to gradual illumination change, while an edge-based modelling is used for solving a colour similarity problem. Finally, an extended conditional random field approach is used to filter out shadow and afterimage noise. Simulation results show that our algorithm performs better compared to the existing methods, which makes it suitable for higher-level applications.

The subsurface of Pluto from submillimetre observations

NASA Astrophysics Data System (ADS)

Greaves, J. S.; Whitelaw, A. C. M.; Bendo, G. J.

2015-04-01

Surface areas on Pluto change in brightness and colour, at optical to infrared wavelengths, over time-scales as short as years. The subsurface contains a reservoir of frozen volatiles, but little is known about it because Pluto is out of reach for cm-radar. Here we present a 0.85 mm wavelength light curve of the Pluto system, from archival data taken in 1997 August with the SCUBA (Submillimetre Common-User Bolometer Array) camera on the James Clerk Maxwell Telescope (JCMT). This wavelength probes for the first time to just below the skin depth of thermal changes over Pluto's day. The light curve differs significantly from counterparts in the mid- to far-infrared, in a longitude range that is optically dark on Pluto's surface. An estimate from Herschel of the 0.5 mm flux in 2012 is comparable to the mean 0.45 mm flux from SCUBA in 1997, suggesting that layers centimetres below the surface have not undergone any gross temperature change. The longitudes that are relatively submillimetre-faint could have a different emissivity, perhaps with a subsurface layer richer in nitrogen or methane ices than at the surface. The Radio Science Experiment (REX) instrument on New Horizons may be able to constrain physical properties deeper down, as it looks back on Pluto's nightside after the 2015 July flyby.

Effects of Different Heat Processing on Fucoxanthin, Antioxidant Activity and Colour of Indonesian Brown Seaweeds

NASA Astrophysics Data System (ADS)

Susanto, Eko; Suhaeli Fahmi, A.; Winarni Agustini, Tri; Rosyadi, Septian; Dita Wardani, Ayunda

2017-02-01

Fucoxanthin (Fx) is major carotenoids in brown algae. It showed many health beneficial effects for oxidative stress. Fucoxanthin is lower stability which may cause problem in the application for functional food. The objective of this study was to evaluate the effects of various heat processing on Fx, antioxidant activity (IC50), total phenolic content, and colour stability of Sargassum ilicifolium. The various heat processing methods showed were not significantly affected to fucoxanthin and antioxidant activities however all treatments lower affected to brown seaweeds colour. Moreover, this study showed a useful proved in the design of brown seaweeds processing which minimize Fx, antioxidant activity and colour changes.

Entrainment to the CIECAM02 and CIELAB colour appearance models in the human cortex.

PubMed

Thwaites, Andrew; Wingfield, Cai; Wieser, Eric; Soltan, Andrew; Marslen-Wilson, William D; Nimmo-Smith, Ian

2018-04-01

In human visual processing, information from the visual field passes through numerous transformations before perceptual attributes such as colour are derived. The sequence of transforms involved in constructing perceptions of colour can be approximated by colour appearance models such as the CIE (2002) colour appearance model, abbreviated as CIECAM02. In this study, we test the plausibility of CIECAM02 as a model of colour processing by looking for evidence of its cortical entrainment. The CIECAM02 model predicts that colour is split in to two opposing chromatic components, red-green and cyan-yellow (termed CIECAM02-a and CIECAM02-b respectively), and an achromatic component (termed CIECAM02-A). Entrainment of cortical activity to the outputs of these components was estimated using measurements of electro- and magnetoencephalographic (EMEG) activity, recorded while healthy subjects watched videos of dots changing colour. We find entrainment to chromatic component CIECAM02-a at approximately 35 ms latency bilaterally in occipital lobe regions, and entrainment to achromatic component CIECAM02-A at approximately 75 ms latency, also bilaterally in occipital regions. For comparison, transforms from a less physiologically plausible model (CIELAB) were also tested, with no significant entrainment found. Copyright © 2018 Elsevier Ltd. All rights reserved.

Adaptive camouflage: what can be learned from the wetting behaviour of the tropical flat bugs Dysodius lunatus and Dysodiusmagnus.

PubMed

Hischen, Florian; Reiswich, Vladislav; Kupsch, Desirée; De Mecquenem, Ninon; Riedel, Michael; Himmelsbach, Markus; Weth, Agnes; Heiss, Ernst; Armbruster, Oskar; Heitz, Johannes; Baumgartner, Werner

2017-08-15

The neotropical flat bug species Dysodius lunatus and Dysodius magnus show a fascinating camouflage principle, as their appearance renders the animal hardly visible on the bark of trees. However, when getting wet due to rain, bark changes its colour and gets darker. In order to keep the camouflage effect, it seems that some Dysodius species benefit from their ability to hold a water film on their cuticle and therefore change their optical properties when also wetted by water. This camouflage behaviour requires the insect to have a hydrophilic surface and passive surface structures which facilitate the liquid spreading. Here we show morphological and chemical characterisations of the surface, especially the cuticular waxes of D. magnus Scanning electron microscopy revealed that the animal is covered with pillar-like microstructures which, in combination with a surprising chemical hydrophilicity of the cuticle waxes, render the bug almost superhydrophilic: water spreads immediately across the surface. We could theoretically model this behaviour assuming the effect of hemi-wicking (a state in which a droplet sits on a rough surface, partwise imbibing the structure around).  Additionally the principle was abstracted and a laser-patterned polymer surface, mimicking the structure and contact angle of Dysodius wax, shows exactly the behaviour of the natural role model - immediate spreading of water and the formation of a thin continuous water film changing optical properties of the surface. © 2017. Published by The Company of Biologists Ltd.

Adaptive camouflage: what can be learned from the wetting behaviour of the tropical flat bugs Dysodius lunatus and Dysodius magnus

PubMed Central

Reiswich, Vladislav; Kupsch, Desirée; De Mecquenem, Ninon; Riedel, Michael; Himmelsbach, Markus; Weth, Agnes; Heiss, Ernst; Armbruster, Oskar; Heitz, Johannes; Baumgartner, Werner

2017-01-01

ABSTRACT The neotropical flat bug species Dysodius lunatus and Dysodius magnus show a fascinating camouflage principle, as their appearance renders the animal hardly visible on the bark of trees. However, when getting wet due to rain, bark changes its colour and gets darker. In order to keep the camouflage effect, it seems that some Dysodius species benefit from their ability to hold a water film on their cuticle and therefore change their optical properties when also wetted by water. This camouflage behaviour requires the insect to have a hydrophilic surface and passive surface structures which facilitate the liquid spreading. Here we show morphological and chemical characterisations of the surface, especially the cuticular waxes of D. magnus. Scanning electron microscopy revealed that the animal is covered with pillar-like microstructures which, in combination with a surprising chemical hydrophilicity of the cuticle waxes, render the bug almost superhydrophilic: water spreads immediately across the surface. We could theoretically model this behaviour assuming the effect of hemi-wicking (a state in which a droplet sits on a rough surface, partwise imbibing the structure around).  Additionally the principle was abstracted and a laser-patterned polymer surface, mimicking the structure and contact angle of Dysodius wax, shows exactly the behaviour of the natural role model – immediate spreading of water and the formation of a thin continuous water film changing optical properties of the surface. PMID:28811303

The Effect of Colour Psychodynamic Environment on the Psychophysiological and Behavioural Reactions of Severely Handicapped Children. Effects of Colour/Light Changes on Severely Handicapped Children.

ERIC Educational Resources Information Center

Wohlfarth, H.; Sam, C.

The effects of varied lighting and coloring in the classroom environment were examined on the behavior of seven severely handicapped 8 to 11 year olds with behavior problems. Analysis of changes in systolic blood pressure indicated that Ss were more comfortable and relaxed in the experimental room (in which the fluorescent lights were replaced by…

Geometric calibration of Colour and Stereo Surface Imaging System of ESA's Trace Gas Orbiter

NASA Astrophysics Data System (ADS)

Tulyakov, Stepan; Ivanov, Anton; Thomas, Nicolas; Roloff, Victoria; Pommerol, Antoine; Cremonese, Gabriele; Weigel, Thomas; Fleuret, Francois

2018-01-01

There are many geometric calibration methods for "standard" cameras. These methods, however, cannot be used for the calibration of telescopes with large focal lengths and complex off-axis optics. Moreover, specialized calibration methods for the telescopes are scarce in literature. We describe the calibration method that we developed for the Colour and Stereo Surface Imaging System (CaSSIS) telescope, on board of the ExoMars Trace Gas Orbiter (TGO). Although our method is described in the context of CaSSIS, with camera-specific experiments, it is general and can be applied to other telescopes. We further encourage re-use of the proposed method by making our calibration code and data available on-line.

An optoelectronic nose for the detection of toxic gases.

PubMed

Lim, Sung H; Feng, Liang; Kemling, Jonathan W; Musto, Christopher J; Suslick, Kenneth S

2009-10-01

We have developed a simple colorimetric sensor array that detects a wide range of volatile analytes and then applied it to the detection of toxic gases. The sensor consists of a disposable array of cross-responsive nanoporous pigments with colours that are changed by diverse chemical interactions with analytes. Although no single chemically responsive pigment is specific for any one analyte, the pattern of colour change for the array is a unique molecular fingerprint. Clear differentiation among 19 different toxic industrial chemicals (TICs) within two minutes of exposure at concentrations immediately dangerous to life or health were demonstrated. Based on the colour change of the array, quantification of each analyte was accomplished easily, and excellent detection limits were achieved, generally below the permissible exposure limits. Different TICs were identified readily using a standard chemometric approach (hierarchical clustering analysis), with no misclassifications over 140 trials.

Towards quantifying the aesthetic outcomes of breast cancer treatment: comparison of clinical photography and colorimetry.

PubMed

Kim, Min Soon; Rodney, William N; Cooper, Tara; Kite, Chris; Reece, Gregory P; Markey, Mia K

2009-02-01

Scarring is a significant cause of dissatisfaction for women who undergo breast surgery. Scar tissue may be clinically distinguished from normal skin by aberrant colour, rough surface texture, increased thickness (hypertrophy) and firmness. Colorimeters or spectrophotometers can be used to quantitatively assess scar colour, but they require direct patient interaction and can cost thousands of dollars. By comparison, digital photography is already in widespread use to document clinical outcomes and requires less patient interaction. Thus, assessment of scar coloration by digital photography is an attractive alternative. The goal of this study was to compare colour measurements obtained by digital photography and colorimetry. Agreements between photographic and colorimetric measurements of colour were evaluated. Experimental conditions were controlled by performing measurements on artificial scars created by a make-up artist. The colorimetric measurements of the artificial scars were compared with those reported in the literature for real scars in order to confirm the validity of this approach. We assessed the agreement between the colorimetric and photographic measurements of colour using a hypothesis test for equivalence, the intraclass correlation coefficient and the Bland-Altman method. Overall, good agreement was obtained for three parameters (L*a*b*) measured by colorimetry and photography from the results of three statistical analyses. Colour measurements obtained by digital photography were equivalent to those obtained using colorimetry. Thus, digital photography is a reliable, cost-effective measurement method of skin colour and should be further investigated for quantitative analysis of surgical outcomes.

Colour formation in fermented sausages by meat-associated staphylococci with different nitrite- and nitrate-reductase activities.

PubMed

Gøtterup, Jacob; Olsen, Karsten; Knøchel, Susanne; Tjener, Karsten; Stahnke, Louise H; Møller, Jens K S

2008-04-01

Three Staphylococcus strains, S. carnosus, S. simulans and S. saprophyticus, selected due to their varying nitrite and/or nitrate-reductase activities, were used to initiate colour formation during sausage fermentation. During fermentation of sausages with either nitrite or nitrate added, colour was followed by L(∗)a(∗)b measurements and the content of nitrosylmyoglobin (MbFe(II)NO) quantified by electron spin resonance (ESR). MbFe(II)NO was rapidly formed in sausages with added nitrite independent of the presence of nitrite reducing bacteria, whereas the rate of MbFe(II)NO formation in sausages with added nitrate depended on the specific Staphylococcus strain. Strains with high nitrate-reductase activity showed a significantly faster rate of pigment formation, but other factors were of influence as well. Product stability for the sliced, packaged sausage was evaluated as surface colour and oxidation by autofluorescence and hexanal content, respectively. No significant direct effect of the Staphylococcus addition was observed, however, there was a clear correspondence between high initial amount of MbFe(II)NO in the different sausages and the colour stability during storage. Autofluorescence data correlated well with hexanal content, and may be used as predictive tools. Overall, nitrite- and nitrate-reductase activities of Staphylococcus strains in nitrite-cured sausages were of limited importance regarding colour development, while in nitrate-cured sausages strains with higher nitrate reductase activity were crucial for ensuring optimal colour formation during initial fermentation stages.

Galaxy populations in the Antlia cluster - III. Properties of faint early-type galaxies

NASA Astrophysics Data System (ADS)

Smith Castelli, Analía. V.; Cellone, Sergio A.; Faifer, Favio R.; Bassino, Lilia P.; Richtler, Tom; Romero, Gisela A.; Calderón, Juan Pablo; Caso, Juan Pablo

2012-01-01

We present a new analysis of the early-type galaxy population in the central region of the Antlia cluster, focusing on the faint systems such as dwarf ellipticals (dEs) and dwarf spheroidals (dSphs). The colour-magnitude relation (CMR) and the relation between luminosity and mean effective surface brightness for galaxies in the central region of Antlia have been previously studied in Paper I of the present series. Now we confirm 22 early-type galaxies as Antlia members, using Gemini-GMOS and Magellan-MIKE spectra. Among them, 15 are dEs from the FS90 Antlia Group catalogue, two belong to the rare type of compact ellipticals (cEs) and five are new faint dwarfs that had never been catalogued before. In addition, we present 16 newly identified low-surface-brightness galaxy candidates, almost half of them displaying morphologies consistent with being Antlia's counterparts of Local Group dSphs, which extend the faint luminosity limit of our study down to MB=-10.1(BT= 22.6) mag. With these new data, we built an improved CMR in the Washington photometric system, i.e. integrated T1 magnitudes versus (C-T1) colours, which extends ˜4 mag faintwards the limit of spectroscopically confirmed Antlia members. When only confirmed early-type members are considered, this relation extends over 10 mag in luminosity with no apparent change in slope or increase in colour dispersion towards its faint end. The intrinsic colour scatter of the relation is compared with those reported for other clusters of galaxies; we argue that it is likely that the large scatter of the CMR, usually reported at faint magnitudes, is mostly due to photometric errors along with an improper membership/morphological classification. The distinct behaviour of the luminosity versus mean effective surface brightness relation at the bright and faint ends is analysed, while it is confirmed that dE galaxies on the same relation present a very similar effective radius, regardless of their colour. The projected spatial distribution of the member sample confirms the existence of two groups in Antlia, each one dominated by a giant elliptical galaxy and with one cE located close to each giant. Size and position, with respect to massive galaxies, of the dSph candidates are estimated and compared to Local Group counterparts. Based on observations carried out at the Cerro Tololo Inter-American Observatory (Chile), at Las Campanas Observatory (Chile) and at the European Southern Observatory, Paranal (Chile). Also based on observations obtained at the Gemini Observatory, which is operated by the Association of Universities for Research in Astronomy, Inc., under a cooperative agreement with the NSF on behalf of the Gemini partnership: the National Science Foundation (United States), the Science and Technology Facilities Council (United Kingdom), the National Research Council (Canada), CONICYT (Chile), the Australian Research Council (Australia), Ministerio da Ciencia e Tecnologia (Brazil) and Ministerio de Ciencia, Tecnología e Innovación Productiva (Argentina).

A possible structural correlate of learning performance on a colour discrimination task in the brain of the bumblebee

PubMed Central

Li, Li; MaBouDi, HaDi; Egertová, Michaela; Elphick, Maurice R.

2017-01-01

Synaptic plasticity is considered to be a basis for learning and memory. However, the relationship between synaptic arrangements and individual differences in learning and memory is poorly understood. Here, we explored how the density of microglomeruli (synaptic complexes) within specific regions of the bumblebee (Bombus terrestris) brain relates to both visual learning and inter-individual differences in learning and memory performance on a visual discrimination task. Using whole-brain immunolabelling, we measured the density of microglomeruli in the collar region (visual association areas) of the mushroom bodies of the bumblebee brain. We found that bumblebees which made fewer errors during training in a visual discrimination task had higher microglomerular density. Similarly, bumblebees that had better retention of the learned colour-reward associations two days after training had higher microglomerular density. Further experiments indicated experience-dependent changes in neural circuitry: learning a colour-reward contingency with 10 colours (but not two colours) does result, and exposure to many different colours may result, in changes to microglomerular density in the collar region of the mushroom bodies. These results reveal the varying roles that visual experience, visual learning and foraging activity have on neural structure. Although our study does not provide a causal link between microglomerular density and performance, the observed positive correlations provide new insights for future studies into how neural structure may relate to inter-individual differences in learning and memory. PMID:28978727

A possible structural correlate of learning performance on a colour discrimination task in the brain of the bumblebee.

PubMed

Li, Li; MaBouDi, HaDi; Egertová, Michaela; Elphick, Maurice R; Chittka, Lars; Perry, Clint J

2017-10-11

Synaptic plasticity is considered to be a basis for learning and memory. However, the relationship between synaptic arrangements and individual differences in learning and memory is poorly understood. Here, we explored how the density of microglomeruli (synaptic complexes) within specific regions of the bumblebee ( Bombus terrestris ) brain relates to both visual learning and inter-individual differences in learning and memory performance on a visual discrimination task. Using whole-brain immunolabelling, we measured the density of microglomeruli in the collar region (visual association areas) of the mushroom bodies of the bumblebee brain. We found that bumblebees which made fewer errors during training in a visual discrimination task had higher microglomerular density. Similarly, bumblebees that had better retention of the learned colour-reward associations two days after training had higher microglomerular density. Further experiments indicated experience-dependent changes in neural circuitry: learning a colour-reward contingency with 10 colours (but not two colours) does result, and exposure to many different colours may result, in changes to microglomerular density in the collar region of the mushroom bodies. These results reveal the varying roles that visual experience, visual learning and foraging activity have on neural structure. Although our study does not provide a causal link between microglomerular density and performance, the observed positive correlations provide new insights for future studies into how neural structure may relate to inter-individual differences in learning and memory. © 2017 The Authors.

Dissecting the 'bacon and eggs' phenotype: transcriptomics of post-anthesis colour change in Lotus.

PubMed

Boehm, Mannfred M A; Ojeda, Dario I; Cronk, Quentin C B

2017-10-17

Post-anthesis colour change (PACC) is widely thought to be an adaptation to signal floral suitability to pollinators. Lotus filicaulis and Lotus sessilifolius are insect-pollinated herbaceous legumes with flowers that open yellow, shift to orange and finally red. This study examines the molecular basis for floral colour change in these Lotus species. Lotus filicaulis was cultivated in a glasshouse from which pollinating insects (bees) were excluded, and the rate of colour change was recorded in both unpollinated and manually pollinated flowers. Unpollinated flowers from both the yellow stage and the red stage were sampled for sequencing. The transcriptomes of L. filicaulis and L. sessilifolius of both colour stages were analysed for differentially expressed genes and enriched ontologies. The rate of progression through PACC doubled when L. filicaulis was hand-pollinated. De novo assembly of RNA-Seq reads from non-model Lotus species outperformed heterologous alignment of reads to the L. japonicus genome. Differential expression analysis suggested that the carotenoid biosynthetic pathway is upregulated at anthesis while the flavonoid biosynthetic pathway is upregulated with the onset of PACC in L. filicaulis and L. sessilifolius . Pollination significantly accelerates PACC in L. filicaulis , consistent with the hypothesis that PACC increases pollination efficiency by directing pollinators to unpollinated flowers. RNA-Seq results show the synchronized upregulation of the entire cyanidin biosynthesis pathway in the red stage of PACC in L. filicaulis and L. sessilifolius . The genes implicated offer the basis for further investigations into how gene families, transcription factors and related pathways are likely to be involved in PACC. © The Author 2017. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Photonic water dynamically responsive to external stimuli

PubMed Central

Sano, Koki; Kim, Youn Soo; Ishida, Yasuhiro; Ebina, Yasuo; Sasaki, Takayoshi; Hikima, Takaaki; Aida, Takuzo

2016-01-01

Fluids that contain ordered nanostructures with periodic distances in the visible-wavelength range, anomalously exhibit structural colours that can be rapidly modulated by external stimuli. Indeed, some fish can dynamically change colour by modulating the periodic distance of crystalline guanine sheets cofacially oriented in their fluid cytoplasm. Here we report that a dilute aqueous colloidal dispersion of negatively charged titanate nanosheets exhibits structural colours. In this ‘photonic water', the nanosheets spontaneously adopt a cofacial geometry with an ultralong periodic distance of up to 675 nm due to a strong electrostatic repulsion. Consequently, the photonic water can even reflect near-infrared light up to 1,750 nm. The structural colour becomes more vivid in a magnetic flux that induces monodomain structural ordering of the colloidal dispersion. The reflective colour of the photonic water can be modulated over the entire visible region in response to appropriate physical or chemical stimuli. PMID:27572806

Variability in avian eggshell colour: a comparative study of museum eggshells.

PubMed

Cassey, Phillip; Portugal, Steven J; Maurer, Golo; Ewen, John G; Boulton, Rebecca L; Hauber, Mark E; Blackburn, Tim M

2010-08-09

The exceptional diversity of coloration found in avian eggshells has long fascinated biologists and inspired a broad range of adaptive hypotheses to explain its evolution. Three main impediments to understanding the variability of eggshell appearance are: (1) the reliable quantification of the variation in eggshell colours; (2) its perception by birds themselves, and (3) its relation to avian phylogeny. Here we use an extensive museum collection to address these problems directly, and to test how diversity in eggshell coloration is distributed among different phylogenetic levels of the class Aves. Spectrophotometric data on eggshell coloration were collected from a taxonomically representative sample of 251 bird species to determine the change in reflectance across different wavelengths and the taxonomic level where the variation resides. As many hypotheses for the evolution of eggshell coloration assume that egg colours provide a communication signal for an avian receiver, we also modelled reflectance spectra of shell coloration for the avian visual system. We found that a majority of species have eggs with similar background colour (long wavelengths) but that striking differences are just as likely to occur between congeners as between members of different families. The region of greatest variability in eggshell colour among closely related species coincided with the medium-wavelength sensitive region around 500 nm. The majority of bird species share similar background eggshell colours, while the greatest variability among species aligns with differences along a red-brown to blue axis that most likely corresponds with variation in the presence and concentration of two tetrapyrrole pigments responsible for eggshell coloration. Additionally, our results confirm previous findings of temporal changes in museum collections, and this will be of particular concern for studies testing intraspecific hypotheses relating temporal patterns to adaptation of eggshell colour. We suggest that future studies investigating the phylogenetic association between the composition and concentration of eggshell pigments, and between the evolutionary drivers and functional impacts of eggshell colour variability will be most rewarding.

Strong Magnetic Field Characterisation

DTIC Science & Technology

2012-04-01

an advertised surface field of approximately 0.5 T were used to supply the static magnetic field source. The disc magnet had a diameter of 50 mm and... colour bar indicates the magnetic field strength set to an arbitrary 0.25 T. The white area has a field >0.25 T. The size of the arrow is proportional...9 shows the magnetic field strength along a slice in the XZ plane. The colours represent the total UNCLASSIFIED 10 UNCLASSIFIED DSTO-TR-2699

[Objective non-contact method of study of the color of the human skin integument by use of a photoelectric colorimeter].

PubMed

Gruzdeva, N I; Zherebtsov, L D; Vasilevskiĭ, V K; Vremzen, S A

1975-04-01

The authors describe a method of determination of the colour of the skin in man based on the use of contactless photoelectric colorimeter made especially for this purpose. The mean normal values of the indices of the skin colour of the anterior and the posterior surface of the arm in 45 men and 35 women of the Europeoid race under normal conditions are presented.

A handheld optical device for skin profile measurement

NASA Astrophysics Data System (ADS)

Sun, Jiuai; Liu, Xiaojin

2018-04-01

This paper describes a portable optical scanning device designed for skin surface measurement on both colour and 3D geometry through a relative easy and cost effective multiple light source photometric stereo method. The validation of colour recovered had been verified through its application on skin lesion segmentation in our early work. This paper focuses on the reconstructed topographic data which are subject to further evaluation and advancement. The evaluation work takes the skin in vitro as an application scenario and compares the experimental result to that obtained by using a commercial product. The experiments show that this handheld device can measure the skin profile significantly closer to that of the ground truth and have the additional function of skin colour recovery.

Illumination preference, illumination constancy and colour discrimination by bumblebees in an environment with patchy light.

PubMed

Arnold, Sarah E J; Chittka, Lars

2012-07-01

Patchy illumination presents foraging animals with a challenge, as the targets being sought may appear to vary in colour depending on the illumination, compromising target identification. We sought to explore how the bumblebee Bombus terrestris copes with tasks involving flower colour discrimination under patchy illumination. Light patches varied between unobscured daylight and leaf-shade, as a bee might encounter in and around woodland. Using a flight arena and coloured filters, as well as one or two different colours of artificial flower, we quantified how bees chose to forage when presented with foraging tasks under patchy illumination. Bees were better at discriminating a pair of similar colours under simulated unobscured daylight illumination than when foraging under leaf-shade illumination. Accordingly, we found that bees with prior experience of simulated daylight but not leaf-shade illumination initially preferred to forage in simulated daylight when all artificial flowers contained rewards as well as when only one colour was rewarding, whereas bees with prior experience of both illuminants did not exhibit this preference. Bees also switched between illuminants less than expected by chance. This means that bees prefer illumination conditions with which they are familiar, and in which rewarding flower colours are easily distinguishable from unrewarding ones. Under patchy illumination, colour discrimination performance was substantially poorer than in homogenous light. The bees' abilities at coping with patchy light may therefore impact on foraging behaviour in the wild, particularly in woodlands, where illumination can change over short spatial scales.

Effects of delayed finishing/polishing on surface roughness, hardness and gloss of tooth-coloured restorative materials.

PubMed

Yazici, A Ruya; Tuncer, Duygu; Antonson, Sibel; Onen, Alev; Kilinc, Evren

2010-01-01

The aim of this study was to investigate the effect of delayed finishing/polishing on the surface roughness, hardness and gloss of tooth-coloured restorative materials. Four different tooth-coloured restoratives: a flowable resin composite- Tetric Flow, a hybrid resin composite- Venus, a nanohybrid resin composite- Grandio, and a polyacid modified resin composite- Dyract Extra were used. 30 specimens were made for each material and randomly assigned into three groups. The first group was finished/polished immediately and the second group was finished/polished after 24 hours. The remaining 10 specimens served as control. The surface roughness of each sample was recorded using a laser profilometer. Gloss measurements were performed using a small-area glossmeter. Vickers microhardness measurements were performed from three locations on each specimen surface under 100g load and 10s dwell time. Data for surface roughness and hardness were analyzed by Kruskal Wallis test and data for gloss were subjected to one-way ANOVA and Tukey test (P <.05). The smoothest surfaces were obtained under Mylar strip for all materials. While there were no significant differences in surface roughness of immediate and delayed finished/polished Dyract Extra samples, immediately finished/polished Venus and Grandio samples showed significantly higher roughness than the delayed polished samples (P <.05). In Tetric Flow samples, immediately finishing/polishing provided smoother surface than delayed finishing/polishing (P <.05). The highest gloss values were recorded under Mylar strip for all materials. While delayed finishing/polishing resulted in a significantly higher gloss compared to immediate finishing/polishing in Venus samples (P <.05), no differences were observed between delayed or immediate finishing/polishing for the other materials (P>.05). The lowest hardness values were found under Mylar strip. Delayed finishing/polishing significantly increased the hardness of all materials. The effect of delayed finishing/polishing on surface roughness, gloss and hardness appears to be material dependent.

Solvent optimization for anthocyanin extraction from Syzygium cumini L. Skeels using response surface methodology.

PubMed

Chaudhary, Bratati; Mukhopadhyay, Kunal

2013-05-01

Anthocyanins are plant pigments that are potential candidates for use as natural food colourant. In this study, Syzygium cumini fruit skin has been used as anthocyanin source. All the six major types of anthocyanins were identified in the sample by ultra performance liquid chromatography studies, and the antioxidant activity was found to be 4.34 ± 0.26 Fe(2+)g(- 1) in the sample with highest anthocyanin content. Optimization of conditions for extracting high amounts of anthocyanin from the fruit peels was investigated by response surface methodology. The results suggested that highest anthocyanin yield (763.80 mg; 100 ml(- 1)), highest chroma and hue angle in the red colour range could be obtained when 20% ethanol was used in combination with 1% acetic acid. Methanol was replaced with ethanol for the extraction of pigments due to its less toxicity and being safe for human consumption. The optimized solvent can be used to extract anthocyanins from the S. cumini fruits and used as natural colourants in the food industries.

A study of the H I and optical properties of Low Surface Brightness galaxies: spirals, dwarfs, and irregulars

NASA Astrophysics Data System (ADS)

Honey, M.; van Driel, W.; Das, M.; Martin, J.-M.

2018-06-01

We present a study of the H I and optical properties of nearby (z ≤ 0.1) Low Surface Brightness galaxies (LSBGs). We started with a literature sample of ˜900 LSBGs and divided them into three morphological classes: spirals, irregulars, and dwarfs. Of these, we could use ˜490 LSBGs to study their H I and stellar masses, colours, and colour-magnitude diagrams, and local environment, compare them with normal, High Surface Brightness (HSB) galaxies and determine the differences between the three morphological classes. We found that LSB and HSB galaxies span a similar range in H I and stellar masses, and have a similar M_{H I}/M⋆-M⋆ relationship. Among the LSBGs, as expected, the spirals have the highest average H I and stellar masses, both of about 109.8 M⊙. The LSGBs' (g - r) integrated colour is nearly constant as function of H I mass for all classes. In the colour-magnitude diagram, the spirals are spread over the red and blue regions whereas the irregulars and dwarfs are confined to the blue region. The spirals also exhibit a steeper slope in the M_{H I}/M⋆-M⋆ plane. Within their local environment, we confirmed that LSBGs are more isolated than HSB galaxies, and LSB spirals more isolated than irregulars and dwarfs. Kolmogorov-Smirnov statistical tests on the H I mass, stellar mass, and number of neighbours indicate that the spirals are a statistically different population from the dwarfs and irregulars. This suggests that the spirals may have different formation and H I evolution than the dwarfs and irregulars.

A comparison of roughness parameters and friction coefficients of aesthetic archwires.

PubMed

Rudge, Philippa; Sherriff, Martyn; Bister, Dirk

2015-02-01

Compare surface roughness of 'aesthetic' nickel-titanium (NiTi) archwires with their dynamic frictional properties. Archwires investigated were: four fully coated tooth coloured [Forestadent: Biocosmetic (FB) and Titanol Cosmetic (FT); TOC Tooth Tone (TT); and Hawley Russell Coated Superelastic NiTi (HRC)]; two partially coated tooth coloured [DB Euroline Microcoated (DB) and TP Aesthetic NiTi (TP)]; two rhodium coated [TOC Sentalloy (TS) and Hawley Russell Rhodium Coated Superelastic NiTi (HRR)]; and two controls: stainless steel [Forestadent Steel (FS)] and NiTi archwire [Forestadent Titanol Superelastic (FN)]. Surface roughness [profilometry (Rugosurf)] was compared with frictional coefficients for archwire/bracket/ligature combinations (n = 10). Analysis of variance, Sidak's multiple comparison of means, and Spearman's correlation coefficient were used for analysis. Roughness coefficients were from low to high: FB; FN; TT; FS; TS; HRR; FT; DB; TP; HRC. Friction coefficients were from low to high: TP; FS; FN; HRR; FT; DB; FB; HRC; TS; TT. Coated archwires generally exhibited higher friction than uncoated controls. TP had the lowest friction but this was not statistically significant (P < 0.05). Friction of tooth coloured coated archwires were significantly different for some wires. Spearman's correlation did not demonstrate consistency between surface roughness (R a) and dynamic friction. Aesthetic archwires investigated had either low surface roughness or low frictional resistance but not both properties simultaneously. Causes for friction are likely to be multifactorial and do not appear to be solely determined by surface roughness (measured by profilometry). For selecting the most appropriate aligning archwire, both surface roughness and frictional resistance need to be considered. © The Author 2014. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Standardisation of radiation portal monitor controls and readouts.

PubMed

Tinker, M

2010-10-01

There is an urgent need to standardise the numbering configuration of radiation portal monitor sensing panels. Currently, manufacturers use conflicting numbering schemes that may confuse operators of these varied systems. There is a similar problem encountered with the varied choices of coloured indicator lights and coloured print lines designated for gamma and neutron alarms. In addition, second-party software that changes the alarm colour scheme may also have been installed. Furthermore, no provision exists for the colour blind or to provide work stations with only black ink on alarm printouts. These inconsistencies and confusing set-ups could inadvertently cause a misinterpretation of the alarm, resulting in the potential release of a radiological hazard into a sovereign country. These issues are discussed, and a proposed solution is offered.

3DS-colorimeter based on a mobile phone camera for industrial applications

NASA Astrophysics Data System (ADS)

Miettinen, Jari; Martinkauppi, J. Birgitta; Suopajärvi, Pekka

2013-02-01

Colour gives an essential finishing touch to many products. Consumers find it as an important factor, for example, when selecting doors, furniture, parquet and coated metal products. Currently, colour evaluation is often carried out by looking at the product. Since people's memory for an exact colour is poor, this method often produces unsatisfactory results in industrial quality control. In this paper, we discuss how to solve this problem by the use of a colour measurement technology for mobile phones equipped with a suitable accessory. Mobile phones provide a suitable monitor platform even for laymen as people are increasingly using their mobile devices for purposes of entertainment, communication and business, thus making them a familiar device to use. Our 3DS-colorimeter is a new, handheld, low-cost consumer/industrial-level prototype combining both a colorimeter feature and 3D surface measurement feature. In this paper, we describe its colorimeter features shortly and demonstrate its performance in measurement repeatability and colorimetric accuracy. As an application example, we show its usefulness for monitoring the colour appearance of painted doors. This study indicates that the 3DS-colorimeter is applicable to industrial quality control.

Effects of natural antioxidants on colour stability, lipid oxidation and metmyoglobin reducing activity in raw beef patties.

PubMed

Liu, Fang; Xu, Qian; Dai, Ruitong; Ni, Yuanying

2015-01-01

Minced meats undergo oxidative changes and develop rancidity more quickly than intact muscle since grinding exposes more of the muscle surface to air and microbial contamination. Due to concerns about toxicological safety of synthetic antioxidants, recent studies have put more focus on natural antioxidant compounds derived from food components. The effects of four natural antioxidants (vitamin E, carnosine, grape seed extract and tea catechins) on oxidative processes and metmyoglobin reducing activity in raw beef patties during refrigerated (4°C) storage were investigated and the results were compared with butylated hydroxyanisole treatment patties. The correlation of lipid oxidation, colour and metmyoglobin reducing activity of beef patties were also studied. Samples treated with carnosine had the highest redness values on the eighth day. Tea catechins, vitamin E and grape seed extract showed higher protective effect against lipid oxidation than carnosine. Metmyoglobin reducing activity increased greatly in all samples during the storage. Significant correlation between redness value and lipid oxidation was demonstrated, while a weak correlation between metmyoglobin reducing activity and any other parameters was shown.

[Digital processing and evaluation of ultrasound images].

PubMed

Borchers, J; Klews, P M

1993-10-01

With the help of workstations and PCs, on-site image processing has become possible. If the images are not available in digital form the video signal has to be A/D converted. In the case of colour images the colour channels R (red), G (green) and B (blue) have to be digitized separately. "Truecolour" imaging calls for an 8 bit resolution per channel, leading to 24 bits per pixel. Out of a pool of 2(24) possible values only the relevant 128 gray values and 64 shades of red and blue respectively needed for a colour-coded ultrasound image have to be isolated. Digital images can be changed and evaluated with the help of readily available image evaluation programmes. It is mandatory that during image manipulation the gray scale and colour pixels and LUTs (Look-Up-Table) must be worked on separately. Using relatively simple LUT manipulations astonishing image improvements are possible. Application of simple mathematical operations can lead to completely new clinical results. For example, by subtracting two consecutive colour flow images in time and special LUT operations, local acceleration of blood flow can be visualized (Colour Acceleration Imaging).

Application of the differential colorimetry and polyphenolic profile to the evaluation of the chromatic quality of Tempranillo red wines elaborated in warm climate. Influence of the presence of oak wood chips during fermentation.

PubMed

Gordillo, Belén; Cejudo-Bastante, María Jesús; Rodríguez-Pulido, Francisco J; González-Miret, M Lourdes; Heredia, Francisco J

2013-12-01

The effect of adding American oak wood chips during fermentation on Tempranillo red wines elaborates in a warm climate has been studied. Our attention was focused on the tristimulus colorimetry, differential colorimetry and phenolic compounds related to wine colour. This technique was applied as an oenological alternative to the conventional winemaking for avoiding the common fall of colour of red wines elaborated in warm climates. The addition of oak wood chips promoted the colour enhancement and stabilisation, producing wines with a notably darker colour and with more bluish tonality. This fact was also related to the significantly higher content of some phenolic compounds. On the basis of the results, it could be affirmed that the addition of oak wood chips during fermentation induced visually perceptible colour changes (by the analysis of ΔEab(*), %Δ(2)L, %Δ(2)C and %Δ(2)H), mainly in a quantitative way, and also a lower percentage of diminution of colour. Copyright © 2013 Elsevier Ltd. All rights reserved.

Reliability of tristimulus colourimetry in the assessment of cutaneous bruise colour.

PubMed

Scafide, Katherine N; Sheridan, Daniel J; Taylor, Laura A; Hayat, Matthew J

2016-06-01

Bruising is one of the most common types of injury clinicians observe among victims of violence and other trauma patients. However, research has shown commonly used qualitative description of cutaneous bruise colour via the naked eye is subjective and unreliable. No published work has formally evaluated the reliability of tristimulus colourimetry as an alternative for assessing bruise colour, despite its clinical and research applications in accurately assessing skin colour. The purpose of this study was to systematically evaluate the test-retest and inter-observer reliability of tristimulus colourimetry in the assessment of cutaneous bruise colour. Two researchers obtained repeated tristimulus colourimetry measures of cutaneous bruises with participants of diverse skin colour. Measures were obtained using the Minolta CR-400 Chomameter. Commission Internationale d'Eclairage (CIE) L*a*b* colour space was used. Data was analysed using intraclass correlation coefficients (ICC), Cronbach's alpha, and minimal detectable change (MDC) on all three L*a*b* values. The colorimeter demonstrated excellent test-retest or intra-rater reliability (L* ICC=0.999; a* ICC=0.973; b* ICC=0.892) and inter-rater reliability (L* ICC=0.997; a* ICC=0.976; b* ICC=0.982). With consistent placement, the tristimulus colourimetry is reliable for the objective assessment and documentation of cutaneous bruise colour for purposes of clinical practice and research. Recommendations for use in practice/research are provided. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dynamic eye colour as an honest signal of aggression.

PubMed

Heathcote, Robert J P; Darden, Safi K; Troscianko, Jolyon; Lawson, Michael R M; Brown, Antony M; Laker, Philippa R; Naisbett-Jones, Lewis C; MacGregor, Hannah E A; Ramnarine, Indar; Croft, Darren P

2018-06-04

Animal eyes are some of the most widely recognisable structures in nature. Due to their salience to predators and prey, most research has focused on how animals hide or camouflage their eyes [1]. However, across all vertebrate Classes, many species actually express brightly coloured or conspicuous eyes, suggesting they may have also evolved a signalling function. Nevertheless, perhaps due to the difficulty with experimentally manipulating eye appearance, very few species beyond humans [2] have been experimentally shown to use eyes as signals [3]. Using staged behavioural trials we show that Trinidadian guppies (Poecilia reticulata), which can rapidly change their iris colour, predominantly express conspicuous eye colouration when performing aggressive behaviours towards smaller conspecifics. Furthermore, using a novel, visually realistic robotic system to create a mismatch between signal and relative competitive ability, we show that eye colour is used to honestly signal aggressive motivation. Specifically, robotic 'cheats' (that is, smaller, less-competitive robotic fish that display aggressive eye colouration when defending a food patch) attracted greater food competition from larger real fish. Our study suggests that eye colour may be an under-appreciated aspect of signalling in animals, shows the utility of our biomimetic robotic system for investigating animal behaviour, and provides experimental evidence that socially mediated costs towards low-quality individuals may maintain the honesty of dynamic colour signals. Copyright © 2018 Elsevier Ltd. All rights reserved.

A transparent look at the measurement and application of colour rendering in the use of LED light sources

NASA Astrophysics Data System (ADS)

Leuschner, F. W.; Van Der Westhuyzen, J. G. J.

2014-06-01

The technology for the measurement of colour rendering and colour quality is not new, but many parameters related to this issue are currently changing. A number of standard methods were developed and are used by different specialty areas of the lighting industry. CIE 13.3 has been the accepted standard implemented by many users and used for many years. Light-emitting Diode (LED) technology moves at a rapid pace and, as this lighting source finds wider acceptance, it appears that traditional colour-rendering measurement methods produce inconsistent results. Practical application of various types of LEDs yielded results that challenged conventional thinking regarding colour measurement of light sources. Recent studies have shown that the anatomy and physiology of the human eye is more complex than formerly accepted. Therefore, the development of updated measurement methodology also forces a fresh look at functioning and colour perception of the human eye, especially with regard to LEDs. This paper includes a short description of the history and need for the measurement of colour rendering. Some of the traditional measurement methods are presented and inadequacies are discussed. The latest discoveries regarding the functioning of the human eye and the perception of colour, especially when LEDs are used as light sources, are discussed. The unique properties of LEDs when used in practical applications such as luminaires are highlighted.

Spatio-temporal effects of low severity grassland fire on soil colour

NASA Astrophysics Data System (ADS)

Pereira, Paulo; Cerdà, Artemi; Bolutiene, Violeta; Pranskevicius, Mantas; Úbeda, Xavier; Jordán, Antonio; Zavala, Lorena; Mataix-Solera, Jorge

2013-04-01

Fire changes soil properties directly, through temperature, or indirectly with ash deposition and the temporal elimination of vegetal cover. Both influences change soil colour and soil properties. The degree of changes depends on fire severity that has important implications on soil organic matter, texture, mineralogy and hydrological properties and type of ash produced. The ash colour is different according to the temperature of combustion and burned specie and this property will have implications on soil colour. In addition, ash properties have a strong spatial variability. The aim of this work is to study the spatio-temporal effects of a low severity grassland fire on soil colour occurred in Lithuania, near Vilnius city (54° 42' N, 25° 08' E, 158 m.a.s.l.). After the fire it was designed a plot of 20x20m in a burned and unburned flat area. Soil colour was analysed immediately after the fire, and 2, 5, 7 and 9 months after the fire. In each sampling 25 soil samples were collected, carried out to the laboratory, dried at room temperature (20-24° C) and sieved with the <2mm mesh. Soil colour was observed with the Munsell colour chart and the soil chroma value (CV) was observed. Since data did not respected the Gaussian distribution a neperian logarithmic (ln) transformation was applied. Differences among time and between plots were observed with the repeated measures ANOVA test, followed by a Tukey HSD test. Differences were significant at a p<0.05. The spatial variability (SV) was assessed with the coefficient of variation using non transformed data. The results showed differences among time at a p<0.001, treatment at a p<0.01 and time x treatment at a p<0.01. This means that fire during the first 9 months changed significantly soil colour. The CV of the burned plot was lower than the control plot (darker colour), that is attributed to the deposition of charred material and charcoal. This ash produced in this fire was mainly black coloured. With the time the soil of the burned plot became lighter, due the movement of charred material and charcoal in depth through soil profile. After the fire SV was higher in the burned plot (13.27%) than in the unburned plot (7.95%). This major variability might be attributed to ash influence, since this fire did nit had direct effects on soil. Despite the reduced CV, some patches burned at higher severity, and ash was dark and light grey and this might had influences on soil colour SV. In the following measurements SV was very similar, but always slightly higher in the control plot than in the burned plot. Two months, unburned 15.52% and burned, 14.70%. Five months, unburned, 14.78% and burned 14.42%, Seven months, unburned, 15.15% and burned, 14.67%. Nine months, unburned, 18.96% and burned 17.84%. After the fire ash can be (re)distributed uncountable times. In the immediate period after the fire, finner ash produced at higher severities is easily transported by wind and can remix (Pereira et al., 2013a, Pereira et al., 2013b) and change soil colour. In this fire, vegetation recovered very fast, thus this process might occurred only in the first weeks after the fire (Pereira et al., 2013c). Since vegetation recovered fast, soil colour SV depended on carbon and charred material movement in depth soil profile. Further studies are needed on the soil colour evolution after the fire, since can be an indicator of soil properties such as temperature reached with implications in other soil properties. Acknowledgements The authors appreciated the support of the project "Litfire", Fire effects in Lithuanian soils and ecosystems (MIP-048/2011) funded by the Lithuanian Research Council, Spanish Ministry of Science and Innovation for funding through the HYDFIRE project CGL2010-21670-C02-01, FUEGORED (Spanish Network of Forest Fire Effects on Soils http://grupo.us.es/fuegored/) and to Comissionat per a Universitats i Recerca del DIUE de la Generalitat de Catalunya. References Pereira, P. Cerdà, A., Úbeda, X., Mataix-Solera, J. Arcenegui, V., Zavala, L. (2013a) Modelling the impacts of wildfire on ash thickness in a short-term period, Land Degradation and Development (In press) DOI: 10.1002/ldr.2195 Pereira, P., Cerdà, A., Úbeda, X., Mataix-Solera, J., Martin, D.A., Jordan, A. Burguet, M. (2013b) Effects of fire on ash thickness in a Lithuanian grassland and short-term spatio-temporal changes. Solid Earth Discussions, 4 (1), 1545-1584. doi:10.5194/sed-4-1-2012 Pereira, P., Pranskevicius, M., Cepanko, V., Vaitkute, D., Pundyte, N., Ubeda, X., Mataix-Soler, J., Cerda, A., Martin, D.A. (2013c) Short time vegetation recovers after a spring grassland fire in Lithuania. Temporal and slope position effect, Flamma, 4(1), 13-17.

Responses to colour and host odour cues in three cereal pest species, in the context of ecology and control.

PubMed

Arnold, S E J; Stevenson, P C; Belmain, S R

2015-08-01

Many insects show a greater attraction to multimodal cues, e.g. odour and colour combined, than to either cue alone. Despite the potential to apply the knowledge to improve control strategies, studies of multiple stimuli have not been undertaken for stored product pest insects. We tested orientation towards a food odour (crushed white maize) in combination with a colour cue (coloured paper with different surface spectral reflectance properties) in three storage pest beetle species, using motion tracking to monitor their behaviour. While the maize weevil, Sitophilus zeamais (Motsch.), showed attraction to both odour and colour stimuli, particularly to both cues in combination, this was not observed in the bostrichid pests Rhyzopertha dominica (F.) (lesser grain borer) or Prostephanus truncatus (Horn) (larger grain borer). The yellow stimulus was particularly attractive to S. zeamais, and control experiments showed that this was neither a result of the insects moving towards darker-coloured areas of the arena, nor their being repelled by optical brighteners in white paper. Visual stimuli may play a role in location of host material by S. zeamais, and can be used to inform trap design for the control or monitoring of maize weevils. The lack of visual responses by the two grain borers is likely to relate to their different host-seeking behaviours and ecological background, which should be taken into account when devising control methods.

A three-dimensional geological reconstruction of Noctis Labyrinthus slope tectonics from CaSSIS data

NASA Astrophysics Data System (ADS)

Massironi, M. M.; Pozzobon, R. P.; Lucchetti, A. L.; Simioni, E. S.; Re, C. R.; Mudrič, T. M.; Pajola, M. P.; Cremonese, G. C.; Pommerol, A. P.; Salese, F. S.; Thomas, N. T.; Mege, D. M.

2017-09-01

In November 2016 the CaSSIS (Colour and Stereo Surface Imaging System) imaging system onboard the European Space Agency's ExoMars Trace Gas Orbiter (TGO) acquired 18 images (each composed by 30 framelets for each of the 4 colour channels) of the Martian surface. The first stereo- pairs were taken during the closest approach, at a distance of 520 km from the surface, over the Hebes Chasma and Noctis Labyrithus regions. In the latter case a DTM was prepared over a north facing slope bounding to the north a 2000 m deep depression and to the south a plateau complicated by extensional fault networks. Such slope is characterised by a downthrown block that can be interpreted as a Deep Seated Gravitational Slope Deformation (DSGSD) sensu. In this work we will present a 3D geological reconstruction of the phenomenon that allowed us to constrain the possible main sliding surface, the volumes involved in the gravitational process and the kinematics of the mass movement.

apterous A specifies dorsal wing patterns and sexual traits in butterflies

PubMed Central

2018-01-01

Butterflies have evolved different colour patterns on their dorsal and ventral wing surfaces to serve different signalling functions, yet the developmental mechanisms controlling surface-specific patterning are still unknown. Here, we mutate both copies of the transcription factor apterous in Bicyclus anynana butterflies using CRISPR/Cas9 and show that apterous A, expressed dorsally, functions both as a repressor and modifier of ventral wing colour patterns, as well as a promoter of dorsal sexual ornaments in males. We propose that the surface-specific diversification of wing patterns in butterflies proceeded via the co-option of apterous A or its downstream effectors into various gene regulatory networks involved in the differentiation of discrete wing traits. Further, interactions between apterous and sex-specific factors such as doublesex may have contributed to the origin of sexually dimorphic surface-specific patterns. Finally, we discuss the evolution of eyespot number diversity in the family Nymphalidae within the context of developmental constraints due to apterous regulation. PMID:29467265

Climate change is affecting mortality of weasels due to camouflage mismatch.

PubMed

Atmeh, Kamal; Andruszkiewicz, Anna; Zub, Karol

2018-05-24

Direct phenological mismatch caused by climate change can occur in mammals that moult seasonally. Two colour morphs of the weasel Mustela nivalis (M. n.) occur sympatrically in Białowieża Forest (NE Poland) and differ in their winter pelage colour: white in M. n. nivalis and brown in M. n. vulgaris. Due to their small body size, weasels are vulnerable to attacks by a range of different predators; thus cryptic coat colour may increase their winter survival. By analysing trapping data, we found that the share of white subspecies in the weasel population inhabiting Białowieża Forest decreases with decreasing numbers of days with snow cover. This led us to hypothesise that selective predation pressure should favour one of the two phenotypes, according to the prevailing weather conditions in winter. A simple field experiment with weasel models (white and brown), exposed against different background colours, revealed that contrasting models faced significantly higher detection by predators. Our observations also confirmed earlier findings that the plasticity of moult in M. n. nivalis is very limited. This means that climate change will strongly influence the mortality of the nivalis-type due to prolonged camouflage mismatch, which will directly affect the abundance and geographical distribution of this subspecies.

Hazards of Colour Coding in Visual Approach Slope Indicators,

DTIC Science & Technology

1981-12-01

the glideslope. The central spot (the ’ meatball ’) is displaced above or below the datum lights when the pilot views from above or below the...undershoot is increasing or decreasing, the step changes in intensity may also be evident as a form of flash coding. Colour coding of the ’ meatball " in

Quality changes of pasteurised orange juice during storage: A kinetic study of specific parameters and their relation to colour instability.

PubMed

Wibowo, Scheling; Grauwet, Tara; Santiago, Jihan Santanina; Tomic, Jovana; Vervoort, Liesbeth; Hendrickx, Marc; Van Loey, Ann

2015-11-15

In view of understanding colour instability of pasteurised orange juice during storage, to the best of our knowledge, this study reports for the first time in a systematic and quantitative way on a range of changes in specific quality parameters as a function of time and as well as temperature (20-42 °C). A zero-order (°Brix, fructose, glucose), a first-order (vitamin C), a second-order (sucrose) and a fractional conversion model (oxygen) were selected to model the evolution of the parameters between parentheses. Activation energies ranged from 22 to 136 kJ mol(-1), HMF formation being the most temperature sensitive. High correlations were found between sugars, ascorbic acid, their degradation products (furfural and HMF) and total colour difference (ΔE(∗)). Based on PLS regression, the importance of the quality parameters for colour degradation was ranked relatively among each other: the acid-catalysed degradation of sugars and ascorbic acid degradation reactions appeared to be important for browning development in pasteurised orange juice during ambient storage. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Ocean Colour Climate Change Initiative: I. A Methodology for Assessing Atmospheric Correction Processors Based on In-Situ Measurements

NASA Technical Reports Server (NTRS)

Muller, Dagmar; Krasemann, Hajo; Brewin, Robert J. W.; Deschamps, Pierre-Yves; Doerffer, Roland; Fomferra, Norman; Franz, Bryan A.; Grant, Mike G.; Groom, Steve B.; Melin, Frederic;

Pre-fermentative addition of an enzymatic grape seed hydrolysate in warm climate winemaking. Effect on the differential colorimetry, copigmentation and polyphenolic profiles.

PubMed

Cejudo-Bastante, María Jesús; Rodríguez-Morgado, Bruno; Jara-Palacios, M José; Rivas-Gonzalo, Julián C; Parrado, Juan; Heredia, Francisco J

2016-10-15

The effect of adding an enzymatic hydrolysate of grape seeds (EH-GS) during Syrah wine fermentation in a warm climate has been evaluated. We focused on the polyphenolic composition as well as the application of differential and tristimulus colorimetry to colour data. This is the first attempt at using this oenological alternative to avoid common colour losses of red wines elaborated in a warm climate. The addition of 250g (simple dose, SW) of EH-GS to 120kg of fermentation material promoted a significant (p<0.05) increase in the polyphenolic content of stored wines, especially in benzoic acid, hydroxycinnamic acid derivative, flavonol and anthocyanin levels. This increase could promote a higher copigmentation percentage and maximum colour stabilization (C(∗)ab) without significantly changing the wine tonality. Unexpectedly, the use of a double quantity (DW) of EH-GS resulted in significantly less chroma than for control wines (CW), demonstrating visually perceptible colour changes (ΔE(∗)ab>3 CIELAB units). Copyright © 2016 Elsevier Ltd. All rights reserved.

C-H oxidation and chelation of a dipyrromethane mediated rapid colorimetric naked-eye Cu(ii) chemosensor.

PubMed

Rajmohan, Rajamani; Ayaz Ahmed, Khan Behlol; Sangeetha, Sampathkumar; Anbazhagan, Veerappan; Vairaprakash, Pothiappan

2017-09-08

Copper(ii) ion mediated C-H oxidation of dipyrromethanes (DPMs) to the corresponding dipyrrins followed by complexation invoked the selective sensing of copper(ii) ions in aqueous solutions. On the addition of copper, the colour of the DPM solution instantaneously changes from yellow to pink with the detection limit of 0.104 μM measured by absorption spectroscopy, whereas visible colour changes could be observed by the naked eye for concentrations as low as 3 μM.

Machine Vision-Based Measurement Systems for Fruit and Vegetable Quality Control in Postharvest.

PubMed

Blasco, José; Munera, Sandra; Aleixos, Nuria; Cubero, Sergio; Molto, Enrique

Individual items of any agricultural commodity are different from each other in terms of colour, shape or size. Furthermore, as they are living thing, they change their quality attributes over time, thereby making the development of accurate automatic inspection machines a challenging task. Machine vision-based systems and new optical technologies make it feasible to create non-destructive control and monitoring tools for quality assessment to ensure adequate accomplishment of food standards. Such systems are much faster than any manual non-destructive examination of fruit and vegetable quality, thus allowing the whole production to be inspected with objective and repeatable criteria. Moreover, current technology makes it possible to inspect the fruit in spectral ranges beyond the sensibility of the human eye, for instance in the ultraviolet and near-infrared regions. Machine vision-based applications require the use of multiple technologies and knowledge, ranging from those related to image acquisition (illumination, cameras, etc.) to the development of algorithms for spectral image analysis. Machine vision-based systems for inspecting fruit and vegetables are targeted towards different purposes, from in-line sorting into commercial categories to the detection of contaminants or the distribution of specific chemical compounds on the product's surface. This chapter summarises the current state of the art in these techniques, starting with systems based on colour images for the inspection of conventional colour, shape or external defects and then goes on to consider recent developments in spectral image analysis for internal quality assessment or contaminant detection.

Detection and discrimination of colour, a comparison of physiological and psychophysical data

NASA Astrophysics Data System (ADS)

Valberg, A.; Lee, B. B.

1989-01-01

Whereas the physiological basis of colorimetry (colour matches) is well understood in terms of the trireceptor theory of colour vision, colour discrimination and scaling still lack a comparable foundation. We present here experimental data that demonstrate how sensitivity and responsiveness of different types of cone-opponent and non-opponent cells of the macaque monkey correlate with human threshold sensitivity on the one hand, and how they in combination can be used to construct a suprathreshold equidistant colour space. Psychophysical thresholds correlate well with the threshold envelope of the most sensitive cells when stimuli are projected upon a steady white background. Detection thresholds for stimuli of differing wavelength and purity (saturation) generally indicate a transition from a phasic non-opponent system to a tonic opponent system of on-centre cells as purity increases. Detection and chromatic discrimination thresholds coincide only for long and short wavelengths of high purity, whereas they differ for mid-spectral lights. Different cell types may thus support detection and discrimination with different stimuli. With chromatic scaling of surface colours on the other hand, when stimuli are darker than an adaptation field still other cell types are needed. We demonstrate that it is possible, from a combination of on- and off-opponent cells, to reconstruct a uniform colour space, using summed outputs of cells with the same cone combination and vector addition for cells with different combinations. Different hues are represented by opponent cells with inputs from different cone types, the hue percept being related to the ratio of the activities of these cell systems.

Optimization of Maillard Reaction in Model System of Glucosamine and Cysteine Using Response Surface Methodology

PubMed Central

Arachchi, Shanika Jeewantha Thewarapperuma; Kim, Ye-Joo; Kim, Dae-Wook; Oh, Sang-Chul; Lee, Yang-Bong

2017-01-01

Sulfur-containing amino acids play important roles in good flavor generation in Maillard reaction of non-enzymatic browning, so aqueous model systems of glucosamine and cysteine were studied to investigate the effects of reaction temperature, initial pH, reaction time, and concentration ratio of glucosamine and cysteine. Response surface methodology was applied to optimize the independent reaction parameters of cysteine and glucosamine in Maillard reaction. Box-Behnken factorial design was used with 30 runs of 16 factorial levels, 8 axial levels and 6 central levels. The degree of Maillard reaction was determined by reading absorption at 425 nm in a spectrophotometer and Hunter’s L, a, and b values. ΔE was consequently set as the fifth response factor. In the statistical analyses, determination coefficients (R2) for their absorbance, Hunter’s L, a, b values, and ΔE were 0.94, 0.79, 0.73, 0.96, and 0.79, respectively, showing that the absorbance and Hunter’s b value were good dependent variables for this model system. The optimum processing parameters were determined to yield glucosamine-cysteine Maillard reaction product with higher absorbance and higher colour change. The optimum estimated absorbance was achieved at the condition of initial pH 8.0, 111°C reaction temperature, 2.47 h reaction time, and 1.30 concentration ratio. The optimum condition for colour change measured by Hunter’s b value was 2.41 h reaction time, 114°C reaction temperature, initial pH 8.3, and 1.26 concentration ratio. These results can provide the basic information for Maillard reaction of aqueous model system between glucosamine and cysteine. PMID:28401086

Optimization of Maillard Reaction in Model System of Glucosamine and Cysteine Using Response Surface Methodology.

PubMed

Arachchi, Shanika Jeewantha Thewarapperuma; Kim, Ye-Joo; Kim, Dae-Wook; Oh, Sang-Chul; Lee, Yang-Bong

2017-03-01

Sulfur-containing amino acids play important roles in good flavor generation in Maillard reaction of non-enzymatic browning, so aqueous model systems of glucosamine and cysteine were studied to investigate the effects of reaction temperature, initial pH, reaction time, and concentration ratio of glucosamine and cysteine. Response surface methodology was applied to optimize the independent reaction parameters of cysteine and glucosamine in Maillard reaction. Box-Behnken factorial design was used with 30 runs of 16 factorial levels, 8 axial levels and 6 central levels. The degree of Maillard reaction was determined by reading absorption at 425 nm in a spectrophotometer and Hunter's L, a, and b values. ΔE was consequently set as the fifth response factor. In the statistical analyses, determination coefficients (R 2 ) for their absorbance, Hunter's L, a, b values, and ΔE were 0.94, 0.79, 0.73, 0.96, and 0.79, respectively, showing that the absorbance and Hunter's b value were good dependent variables for this model system. The optimum processing parameters were determined to yield glucosamine-cysteine Maillard reaction product with higher absorbance and higher colour change. The optimum estimated absorbance was achieved at the condition of initial pH 8.0, 111°C reaction temperature, 2.47 h reaction time, and 1.30 concentration ratio. The optimum condition for colour change measured by Hunter's b value was 2.41 h reaction time, 114°C reaction temperature, initial pH 8.3, and 1.26 concentration ratio. These results can provide the basic information for Maillard reaction of aqueous model system between glucosamine and cysteine.

Applicability of the CIELAB and CIEDE2000 Formulae for Detection of Colour Changes in Colour-Changeable Chewing Gum for Evaluating Masticatory Function

PubMed Central

Yeerken, Yesiboli; Said, Mohamed; Li, Na; Taniguchi, Hisashi

2017-01-01

Introduction Mastication is one of the essential stomatognathic functions and is impaired when mandibulectomy is performed for removal of head and neck lesions. Aim The purpose of this study was to investigate the correlation between perceived chewing ability {Masticatory Score (MS)} and objective mixing ability (∆E) in patients who had undergone marginal mandibulectomy. Materials and Methods Twenty normal dentate subjects as control group and twenty mandibulectomy patients who had undergone marginal mandibulectomy and wearing a dentomaxillary prosthesis were enrolled. Perceived chewing ability MS and objective ∆E were evaluated using a food intake questionnaire and the colour-changeable chewing gum, respectively. They were instructed to chew the gum continuously for 100 strokes on their usual side. The chewed gum was measured using the CIELAB colour space defined by a colourimeter and L, a* and b* were obtained. The change in colour of the gum after chewing was calculated using CIELAB (∆Eab) and the CIEDE2000 (∆E00) formula. The relationships of a*, ∆Eab, and ∆E00 with MS score were analyzed using the Spearman’s rank correlation coefficient. Results A correlation was found between perceived chewing ability (MS) and objective mixing ability (index of the masticatory function {∆E}) in marginal mandibulectomy patients. (∆E00 = 0.481, a* = 0.587, ∆Eab = 0.668). Conclusion Within the limitations of this study, it can be concluded that the CIEDE2000 formula for calculation of colour difference can be used to evaluate masticatory function in patients who have undergone marginal mandibulectomy. PMID:28571278

A comparison of colour, shape, and flash induced illusory line motion.

PubMed

Hamm, Jeff P

2017-04-01

When a bar suddenly appears between two boxes, the bar will appear to shoot away from the box that matches it in colour or in shape-a phenomenon referred to as attribute priming of illusory line motion (ILM; colour ILM and shape ILM, respectively). If the two boxes are identical, ILM will still occur away from a box if it changes luminance shortly before the presentation of the bar ( flash ILM). This flash condition has been suggested to produce the illusory motion due to the formation of an attentional gradient surrounding the flashed location. However, colour ILM and shape ILM cannot be explained by an attentional gradient as there is no way for attention to select the matching box prior to the presentation of the bar. These findings challenge the attentional gradient explanation for ILM, but only if it is assumed that ILM arises for the same underlying reason. Two experiments are presented that address the question of whether or not flash ILM is the same as colour ILM or shape ILM. The results suggest that while colour ILM and shape ILM reflect a common illusion, flash ILM arises for a different reason. Therefore, the attentional gradient explanation for flash ILM is not refuted by the occurrence of colour ILM or shape ILM, which may reflect transformational apparent motion (TAM).

Students’ conceptions on white light and implications for teaching and learning about colour

NASA Astrophysics Data System (ADS)

Haagen-Schützenhöfer, Claudia

2017-07-01

The quality of learning processes is mainly determined by the extent to which students’ conceptions are addressed and thus conceptual change is triggered. Colour phenomena are a topic within initial instruction of optics which is challenging. A physically adequate concept of white light is crucial for being able to grasp the processes underlying colour formation. Our previous research suggests that misconceptions on white light may influence the conceptual understanding of colour phenomena. For the design of a learning environment on light and colours, the literature was reviewed. Then an explorative interview study with participants (N  =  32), with and without instruction in introductory optics, was carried out. In addition, the representations used for white light in Austrian physics schoolbooks were analysed. Based on the results of the literature review, the interview study and the schoolbook analysis, a learning environment was designed and tested in teaching experiments. The results indicate that learners often lack an adequate concept of white light even after instruction in introductory optics. This seems to cause learning difficulties concerning colour phenomena. On the other hand, the evaluation of our learning environment showed that students are able to gain a good conceptual understanding of colour phenomena if instruction takes these content specific learning difficulties into account.

Wafer bonding process for building MEMS devices

NASA Astrophysics Data System (ADS)

Pabo, Eric F.; Meiler, Josef; Matthias, Thorsten

2014-06-01

The technology for the measurement of colour rendering and colour quality is not new, but many parameters related to this issue are currently changing. A number of standard methods were developed and are used by different specialty areas of the lighting industry. CIE 13.3 has been the accepted standard implemented by many users and used for many years. Light-emitting Diode (LED) technology moves at a rapid pace and, as this lighting source finds wider acceptance, it appears that traditional colour-rendering measurement methods produce inconsistent results. Practical application of various types of LEDs yielded results that challenged conventional thinking regarding colour measurement of light sources. Recent studies have shown that the anatomy and physiology of the human eye is more complex than formerly accepted. Therefore, the development of updated measurement methodology also forces a fresh look at functioning and colour perception of the human eye, especially with regard to LEDs. This paper includes a short description of the history and need for the measurement of colour rendering. Some of the traditional measurement methods are presented and inadequacies are discussed. The latest discoveries regarding the functioning of the human eye and the perception of colour, especially when LEDs are used as light sources, are discussed. The unique properties of LEDs when used in practical applications such as luminaires are highlighted.

GEOMETRIC, VOLUMETRIC, COLOUR AND FRICTIONAL PROPERTIES OF SELECTED SALVIA SPECIES OF TURKEY.

PubMed

Bayram, Mustafa; Altuntas, Ebubekir; Yilar, Melih

2017-01-01

Salvia seeds are promite to dietary and healthy oils because they contain essential fatty acids. Salvia seeds frequently produce mucilage on soaking, and this mucilage is used for the treatment of eye diseases in eastern countries. Salvia species studied for medicine, food and cosmetics, have the potential to be used in the various fields. In the present study, selected engineering (geometrical, volumetrical, colour and frictional) properties of 6 Salvia species seeds were determined and compared. This study was performed on selected engineering properties of seeds of 6 Salvia species ( Salvia viridis L., Salvia aethiopis L., Salvia cryptantha Montbert & Aucher ex Benthan., Salvia tomentosa Mill ., Salvia sclarea L., Salvia virgata Jacq.,) cultivated in Turkey. Plants were collected during the vegetation in 2012-2013 (May-Agust). The seeds were cleaned from foreign matter, dirt and broken seeds manually. The average length, width and thickness were found in the range of 2.61 to 3.53 mm, 1.59 to 2.92 mm and 1.14 to 2.52 mm, respectively. Salvia viridis L. specie had the lowest geometric mean diameter and surface area, whereas Salvia cryptantha L. had the least values among these 6 Salvia species for these properties. The bulk density, true density and the porosity were between 296.83 and 702.80 kg m -3 , 285.69 and 718.08 kg m -3 , 10.27 and 44.05%, respectively. The volume of unit seed and sphericity ranged between 2.56 and 13.64 mm 3 , 62.90 and 90.40%, respectively. The coefficient of friction of salvia species were largely influenced by the friction surfaces studied, and highest values were found for polywood in the Salvia crytantha L.. In the study, the static friction coefficient and the angle of repose of salvia species changed from 0.477 to 0.955, and from 14.09 to 23.57°, respectively. Determination of geometric, volumetric, colour and frictional properties of Salvia spp. seeds may increase their economic value.

SiO2 nanoparticles change colour preference and cause Parkinson's-like behaviour in zebrafish

PubMed Central

Li, Xiang; Liu, Bo; Li, Xin-Le; Li, Yi-Xiang; Sun, Ming-Zhu; Chen, Dong-Yan; Zhao, Xin; Feng, Xi-Zeng

2014-01-01

With advances in the development of various disciplines, there is a need to decipher bio-behavioural mechanisms via interdisciplinary means. Here, we present an interdisciplinary study of the role of silica nanoparticles (SiO2-NPs) in disturbing the neural behaviours of zebrafish and a possible physiological mechanism for this phenomenon. We used adult zebrafish as an animal model to evaluate the roles of size (15-nm and 50-nm) and concentration (300 μg/mL and 1000 μg/mL) in SiO2-NP neurotoxicity via behavioural and physiological analyses. With the aid of video tracking and data mining, we detected changes in behavioural phenotypes. We found that compared with 50-nm nanosilica, 15-nm SiO2-NPs produced greater significant changes in advanced cognitive neurobehavioural patterns (colour preference) and caused potentially Parkinson's disease-like behaviour. Analyses at the tissue, cell and molecular levels corroborated the behavioural results, demonstrating that nanosilica acted on the retina and dopaminergic (DA) neurons to change colour preference and to cause potentially Parkinson's disease-like behaviour. PMID:24448416

Land-based crop phenotyping by image analysis: consistent canopy characterization from inconsistent field illumination.

PubMed

Chopin, Joshua; Kumar, Pankaj; Miklavcic, Stanley J

2018-01-01

One of the main challenges associated with image-based field phenotyping is the variability of illumination. During a single day's imaging session, or between different sessions on different days, the sun moves in and out of cloud cover and has varying intensity. How is one to know from consecutive images alone if a plant has become darker over time, or if the weather conditions have simply changed from clear to overcast? This is a significant problem to address as colour is an important phenotypic trait that can be measured automatically from images. In this work we use an industry standard colour checker to balance the colour in images within and across every day of a field trial conducted over four months in 2016. By ensuring that the colour checker is present in every image we are afforded a 'ground truth' to correct for varying illumination conditions across images. We employ a least squares approach to fit a quadratic model for correcting RGB values of an image in such a way that the observed values of the colour checker tiles align with their true values after the transformation. The proposed method is successful in reducing the error between observed and reference colour chart values in all images. Furthermore, the standard deviation of mean canopy colour across multiple days is reduced significantly after colour correction is applied. Finally, we use a number of examples to demonstrate the usefulness of accurate colour measurements in recording phenotypic traits and analysing variation among varieties and treatments.

Cross-modal prediction changes the timing of conscious access during the motion-induced blindness.

PubMed

Chang, Acer Y C; Kanai, Ryota; Seth, Anil K

2015-01-01

Despite accumulating evidence that perceptual predictions influence perceptual content, the relations between these predictions and conscious contents remain unclear, especially for cross-modal predictions. We examined whether predictions of visual events by auditory cues can facilitate conscious access to the visual stimuli. We trained participants to learn associations between auditory cues and colour changes. We then asked whether congruency between auditory cues and target colours would speed access to consciousness. We did this by rendering a visual target subjectively invisible using motion-induced blindness and then gradually changing its colour while presenting congruent or incongruent auditory cues. Results showed that the visual target gained access to consciousness faster in congruent than in incongruent trials; control experiments excluded potentially confounding effects of attention and motor response. The expectation effect was gradually established over blocks suggesting a role for extensive training. Overall, our findings show that predictions learned through cross-modal training can facilitate conscious access to visual stimuli. Copyright © 2014 Elsevier Inc. All rights reserved.

Impact of Site-Directed Mutant Luciferase on Quantitative Green and Orange/Red Emission Intensities in Firefly Bioluminescence

NASA Astrophysics Data System (ADS)

Wang, Yu; Akiyama, Hidefumi; Terakado, Kanako; Nakatsu, Toru

2013-08-01

Firefly bioluminescence has attracted great interest because of its high quantum yield and intriguing modifiable colours. Modifications to the structure of the enzyme luciferase can change the emission colour of firefly bioluminescence, and the mechanism of the colour change has been intensively studied by biochemists, structural biologists, optical physicists, and quantum-chemistry theorists. Here, we report on the quantitative spectra of firefly bioluminescence catalysed by wild-type and four site-directed mutant luciferases. While the mutation caused different emission spectra, the spectra differed only in the intensity of the green component (λmax ~ 560 nm). In contrast, the orange (λmax ~ 610 nm) and red (λmax ~ 650 nm) components present in all the spectra were almost unaffected by the modifications to the luciferases and changes in pH. Our results reveal that the intensity of the green component is the unique factor that is influenced by the luciferase structure and other reaction conditions.

Micro-structural integrity of dental enamel subjected to two tooth whitening regimes.

PubMed

Tanaka, Reina; Shibata, Yo; Manabe, Atsufumi; Miyazaki, Takashi

2010-04-01

Colour modification of tooth enamel has proven successful, but it is unclear how various bleaching applications affect micro-structural integrity of the whitened enamel. To investigate the internal structural integrity of human intact tooth enamel with the application of two commonly used whitening regimes (in-office power bleaching with 35% hydrogen peroxide and home bleaching with 10% carbamide peroxide), evaluations were performed on teeth of identical colour classification. After the bleaching applications, the enamel mineral density was quantified and visualised with micro-computed tomography. The micro-structural differences between the whitened tooth enamel samples were distinctive, though the colour parameter changes within the samples were equivalent. Home bleaching achieved colour modification by demineralisation, whereas in-office bleaching depended on redistribution of the minerals after treatment and subsequent enhanced mineralisation.

A novel framework for the use of remote sensing for monitoring catchments at continental scales.

PubMed

Bugnot, A B; Lyons, M B; Scanes, P; Clark, G F; Fyfe, S K; Lewis, A; Johnston, E L

2018-07-01

Historical ecology can teach us valuable lessons on the processes and drivers of environmental change that can inform future monitoring priorities and management strategies. Environmental data to study environmental history, however, is often absent or of low quality. Even when studying changes occurring during the last few decades, monitoring efforts are scarce due to logistical and cost limitations, leaving large areas unassessed. The aim of this study is to evaluate the use of estuarine water colour as an indicator of historical environmental change in catchments. Water colour change was assessed in estuaries in Australia from 1987 to 2015 using satellite remote sensing. Random points were selected for each estuary and applied to the Australian Geoscience Data Cube (based on Landsat images) to obtain reflectance data through time. We propose a framework where (i) water colour is used to detect historical changes in catchments using generalised additive models, (ii) possible stressors and pressures driving those changes are evaluated using other available historical data, and (iii) lessons learned inform appropriate monitoring and management actions. This framework represents a novel approach to generate historical data for large-scale assessments of environmental change at catchment level, even in poorly studied areas. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Global Trends in Chlorophyll Concentration Observed with the Satellite Ocean Colour Data Record

NASA Astrophysics Data System (ADS)

Melin, F.; Vantrepotte, V.; Chuprin, A.; Grant, M.; Jackson, T.; Sathyendranath, S.

2016-08-01

To detect climate change signals in the data records derived from remote sensing of ocean colour, combining data from multiple missions is required, which implies that the existence of inter-mission differences be adequately addressed prior to undertaking trend studies. Trend distributions associated with merged products are compared with those obtained from single-mission data sets in order to evaluate their suitability for climate studies. Merged products originally developed for operational applications such as near-real time distribution (GlobColour) do not appear to be proper climate data records, showing large parts of the ocean with trends significantly different from trends obtained with SeaWiFS, MODIS or MERIS. On the other hand, results obtained from the Climate Change Initiative (CCI) data are encouraging, showing a good consistency with single-mission products.

Influence of bottle storage time on colour, phenolic composition and sensory properties of sweet red wines.

PubMed

Marquez, Ana; Serratosa, Maria P; Merida, Julieta

2014-03-01

Changes in colour and phenolic composition in sweet red wines made from Merlot, Syrah and Tempranillo grapes were studied in order to assess the influence of bottle storage over a period of 12months. For this purpose, wine colour parameters, sensory analysis and concentrations of monomeric anthocyanins, pyranoanthocyanins, methylmethine-mediated condensation adducts, flavan3-ol derivatives and flavonols were measured. Hue increased and red colours decreased with the storage time, particularly over the first 3months. The concentrations of low molecular weight flavan-3-ol derivatives decreased with time due to the effect of their conversion into tannins of high molecular weight. In addition, the glycosylated flavonols decreased through hydrolysis to give the corresponding aglycones. Overall, the concentration of phenolic compounds decreased markedly with storage time, whereas the antioxidant activity in the wines remained constant throughout. A panel of expert tasters judged the colour, aroma and flavour of all initial and final wines to be acceptable. Copyright © 2013 Elsevier Ltd. All rights reserved.

Crowdsourcing as an Analytical Method: Metrology of Smartphone Measurements in Heritage Science.

PubMed

Brigham, Rosie; Grau-Bové, Josep; Rudnicka, Anna; Cassar, May; Strlic, Matija

2018-06-18

This research assesses the precision, repeatability, and accuracy of crowdsourced scientific measurements, and whether their quality is sufficient to provide usable results. Measurements of colour and area were chosen because of the possibility of producing them with smartphone cameras. The quality of the measurements was estimated experimentally by comparing data contributed by anonymous participants in heritage sites with reference measurements of known accuracy and precision. Participants performed the measurements by taking photographs with their smartphones, from which colour and dimensional data could be extracted. The results indicate that smartphone measurements provided by citizen scientists can be used to measure changes in colour, but that the performance is strongly dependent on the measured colour coordinate. The same method can be used to measure areas when the difference in colour with the neighbouring areas is large enough. These results render the method useful in some heritage science contexts, but higher precision would be desirable. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Selection for intramuscular fat and lean meat yield will improve the bloomed colour of Australian lamb loin meat.

PubMed

Calnan, H B; Jacob, R H; Pethick, D W; Gardner, G E

2017-09-01

The colour of bloomed m. longissimus was measured 24h post slaughter for 8165 lamb carcasses produced over 5years across 8 sites in Australia. Intramuscular fat across a 2 to 8% range and shortloin fat weight were positively associated with meat lightness (L*), redness (a*), yellowness (b*), hue and chroma (P<0.01). Shortloin muscle weight was negatively associated with these meat colour parameters (P<0.01), although this was largely accounted for by correlated changes in intramuscular fat (P<0.01). The effect of sire breeding values for lamb weight, shortloin muscle depth and fat depth on loin L*, a*, b*, hue and chroma were small and varied between lambs of different sire type, dam breed and sex. Thus selection for lean meat yield will have neutral or positive effects on meat colour, while selection for increased intramuscular fat will make the bloomed colour of lamb meat lighter and redder. Copyright © 2017. Published by Elsevier Ltd.

Colour As a Signal for Entraining the Mammalian Circadian Clock

PubMed Central

Walmsley, Lauren; Hanna, Lydia; Mouland, Josh; Martial, Franck; West, Alexander; Smedley, Andrew R.; Bechtold, David A.; Webb, Ann R.; Lucas, Robert J.; Brown, Timothy M.

2015-01-01

Twilight is characterised by changes in both quantity (“irradiance”) and quality (“colour”) of light. Animals use the variation in irradiance to adjust their internal circadian clocks, aligning their behaviour and physiology with the solar cycle. However, it is currently unknown whether changes in colour also contribute to this entrainment process. Using environmental measurements, we show here that mammalian blue–yellow colour discrimination provides a more reliable method of tracking twilight progression than simply measuring irradiance. We next use electrophysiological recordings to demonstrate that neurons in the mouse suprachiasmatic circadian clock display the cone-dependent spectral opponency required to make use of this information. Thus, our data show that some clock neurons are highly sensitive to changes in spectral composition occurring over twilight and that this input dictates their response to changes in irradiance. Finally, using mice housed under photoperiods with simulated dawn/dusk transitions, we confirm that spectral changes occurring during twilight are required for appropriate circadian alignment under natural conditions. Together, these data reveal a new sensory mechanism for telling time of day that would be available to any mammalian species capable of chromatic vision. PMID:25884537

The role of meaning in grapheme-colour synaesthesia.

PubMed

Dixon, Mike J; Smilek, Daniel; Duffy, Patricia L; Zanna, Mark P; Merikle, Philip M

2006-02-01

When the synaesthete, J, is shown black graphemes, in addition to perceiving the black digits or letters she also experiences highly specific colours that overlay the graphemes (e.g., 5 is pink, S is green). We used ambiguous graphemes in a Stroop-type task to show that the exact same forms (e.g., 5) can elicit different synaesthetic colours depending on whether they are interpreted as digits or letters. J was shown strings of black digits (e.g., 3 4 5 6 7) or words (e.g., M U S I C for 1 sec. All but one of the graphemes then disappeared and the remaining grapheme changed to a colour that J had to name as quickly as possible. The key trials involved coloured graphemes that were ambiguous (e.g., the 5 in the strings above could be interpreted either as a digit or as a letter). On congruent trials, the colour of the ambiguous target grapheme was the same as J's photism for the digit or letter interpretations of the grapheme. On incongruent trials, the colours of the ambiguous target graphemes were different than the colours of J's photisms for the digit or letter interpretations of the graphemes. On digit-context incongruent trials, the ambiguous graphemes were presented in J's colour for the letter-interpretations of the graphemes, whereas on letter-context incongruent trials, the ambiguous graphemes were presented in J's colours for the digit-interpretations of the graphemes. Thus the same ambiguous grapheme (e.g., a pink 5) served as a congruent stimulus in one context and an incongruent stimulus in another context. J's response times showed that ambiguous graphemes elicited different photisms depending on whether they were interpreted as digits or letters. This finding suggests that it is not the form but the meaning of graphemes (whether they are interpreted as digits or letters) that determines the colours of synaesthetic photisms.

Students' Conceptions on White Light and Implications for Teaching and Learning about Colour

ERIC Educational Resources Information Center

Haagen-Schützenhöfer, Claudia

2017-01-01

The quality of learning processes is mainly determined by the extent to which students' conceptions are addressed and thus conceptual change is triggered. Colour phenomena are a topic within initial instruction of optics which is challenging. A physically adequate concept of white light is crucial for being able to grasp the processes underlying…

Spectral analysis of the Forel-Ule Ocean colour comparator scale

NASA Astrophysics Data System (ADS)

Wernand, M. R.; van der Woerd, H. J.

2010-04-01

François Alphonse Forel (1890) and Willi Ule (1892) composed a colour comparator scale, with tints varying from indigo-blue to coca-cola brown, to quantify the colour of natural waters, like seas, lakes and rivers. For each measurement, the observer compares the colour of the water above a submersed white disc (Secchi disc) with the hand-held scale of pre-defined colours. The scale can be well reproduced from a simple recipe for twenty-one coloured chemical solutions and because the ease of its use, the Forel-Ule (FU) scale has been applied globally and intensively by oceanographers and limnologists from the year 1890. Indeed, the archived FU data belong to the oldest oceanographic data sets and do contain information on the changes in geobiophysical properties of natural waters during the last century. In this article we describe the optical properties of the FU-scale and its ability to cover the colours of natural waters, as observed by the human eye. The recipe of the scale and its reproduction is described. The spectral transmission of the tubes, with belonging chromaticity coordinates, is presented. The FU scale, in all its simplicity, is found to be an adequate ocean colour comparator scale. The scale is well characterized, is stable and observations are reproducible. This supports the idea that the large historic data base of FU measurements is coherent and well calibrated. Moreover, the scale can be coupled to contemporary multi-spectral observations with hand-held and satellite-based spectrometers.

Quantitative assessment of commercial filter 'aids' for red-green colour defectives.

PubMed

Moreland, Jack D; Westland, Steven; Cheung, Vien; Dain, Steven J

2010-09-01

The claims made for 43 commercial filter 'aids', that they improve the colour discrimination of red-green colour defectives, are assessed for protanomaly and deuteranomaly by changes in the colour spacing of traffic signals (European Standard EN 1836:2005) and of the Farnsworth D15 test. Spectral transmittances of the 'aids' are measured and tristimulus values with and without 'aids' are computed using cone fundamentals and the spectral power distributions of either the D15 chips illuminated by CIE Illuminant C or of traffic signals. Chromaticities (l,s) are presented in cone excitation diagrams for protanomaly and deuteranomaly in terms of the relative excitation of their long (L), medium (M) and short (S) wavelength-sensitive cones. After correcting for non-uniform colour spacing in these diagrams, standard deviations parallel to the l and s axes are computed and enhancement factors E(l) and E(s) are derived as the ratio of 'aided' to 'unaided' standard deviations. Values of E(l) for traffic signals with most 'aids' are <1 and many do not meet the European signal detection standard. A few 'aids' have expansive E(l) factors but with inadequate utility: the largest being 1.2 for traffic signals and 1.3 for the D15 colours. Analyses, replicated for 19 'aids' from one manufacturer using 658 Munsell colours inside the D15 locus, yield E(l) factors within 1% of those found for the 16 D15 colours. © 2010 The Authors, Ophthalmic and Physiological Optics © 2010 The College of Optometrists.

Evaluation of the shape of the specular peak for high glossy surfaces

NASA Astrophysics Data System (ADS)

Obein, Gaël.; Ouarets, Shiraz; Ged, Guillaume

2014-02-01

Gloss is the second most relevant visual attribute of a surface beside its colour. While the colour originates from the wavelength repartition of the reflected light, gloss originates from its angular distribution. When an observer is asked to evaluate the gloss of a surface, he always first orientate his eyes along the specular direction before lightly tilting the examined sample. This means that gloss is located in and around the specular direction, in a peak that is called the specular peak. On the one hand, this peak is flat and broad on matte surfaces on the other hand, it is narrow and sharp on high gloss surfaces. For the late ones, the FWHM of the specular peak is less than 2° which can be quite difficult to measure. We developed a dedicated facility capable of measuring specular peak with a FWHM up to 0,1 °. We measured the evolution of the peak according to the angle of illumination and the specular gloss of the sample in the restricted field of very glossy surface. The facility and peaks measured are presented in the paper. The next step will be to identify the correlations between the peak and the roughness of the sample.

Isolation and antisense suppression of flavonoid 3', 5'-hydroxylase modifies flower pigments and colour in cyclamen.

PubMed

Boase, Murray R; Lewis, David H; Davies, Kevin M; Marshall, Gayle B; Patel, Deepa; Schwinn, Kathy E; Deroles, Simon C

2010-06-13

Cyclamen is a popular and economically significant pot plant crop in several countries. Molecular breeding technologies provide opportunities to metabolically engineer the well-characterized flavonoid biosynthetic pathway for altered anthocyanin profile and hence the colour of the flower. Previously we reported on a genetic transformation system for cyclamen. Our aim in this study was to change pigment profiles and flower colours in cyclamen through the suppression of flavonoid 3', 5'-hydroxylase, an enzyme in the flavonoid pathway that plays a determining role in the colour of anthocyanin pigments. A full-length cDNA putatively identified as a F3'5'H (CpF3'5'H) was isolated from cyclamen flower tissue. Amino acid and phylogeny analyses indicated the CpF3'5'H encodes a F3'5'H enzyme. Two cultivars of minicyclamen were transformed via Agrobacterium tumefaciens with an antisense CpF3'5'H construct. Flowers of the transgenic lines showed modified colour and this correlated positively with the loss of endogenous F3'5'H transcript. Changes in observed colour were confirmed by colorimeter measurements, with an overall loss in intensity of colour (C) in the transgenic lines and a shift in hue from purple to red/pink in one cultivar. HPLC analysis showed that delphinidin-derived pigment levels were reduced in transgenic lines relative to control lines while the percentage of cyanidin-derived pigments increased. Total anthocyanin concentration was reduced up to 80% in some transgenic lines and a smaller increase in flavonol concentration was recorded. Differences were also seen in the ratio of flavonol types that accumulated. To our knowledge this is the first report of genetic modification of the anthocyanin pathway in the commercially important species cyclamen. The effects of suppressing a key enzyme, F3'5'H, were wide ranging, extending from anthocyanins to other branches of the flavonoid pathway. The results illustrate the complexity involved in modifying a biosynthetic pathway with multiple branch points to different end products and provides important information for future flower colour modification experiments in cyclamen.

Isolation and antisense suppression of flavonoid 3', 5'-hydroxylase modifies flower pigments and colour in cyclamen

PubMed Central

2010-01-01

Background Cyclamen is a popular and economically significant pot plant crop in several countries. Molecular breeding technologies provide opportunities to metabolically engineer the well-characterized flavonoid biosynthetic pathway for altered anthocyanin profile and hence the colour of the flower. Previously we reported on a genetic transformation system for cyclamen. Our aim in this study was to change pigment profiles and flower colours in cyclamen through the suppression of flavonoid 3', 5'-hydroxylase, an enzyme in the flavonoid pathway that plays a determining role in the colour of anthocyanin pigments. Results A full-length cDNA putatively identified as a F3'5'H (CpF3'5'H) was isolated from cyclamen flower tissue. Amino acid and phylogeny analyses indicated the CpF3'5'H encodes a F3'5'H enzyme. Two cultivars of minicyclamen were transformed via Agrobacterium tumefaciens with an antisense CpF3'5'H construct. Flowers of the transgenic lines showed modified colour and this correlated positively with the loss of endogenous F3'5'H transcript. Changes in observed colour were confirmed by colorimeter measurements, with an overall loss in intensity of colour (C) in the transgenic lines and a shift in hue from purple to red/pink in one cultivar. HPLC analysis showed that delphinidin-derived pigment levels were reduced in transgenic lines relative to control lines while the percentage of cyanidin-derived pigments increased. Total anthocyanin concentration was reduced up to 80% in some transgenic lines and a smaller increase in flavonol concentration was recorded. Differences were also seen in the ratio of flavonol types that accumulated. Conclusion To our knowledge this is the first report of genetic modification of the anthocyanin pathway in the commercially important species cyclamen. The effects of suppressing a key enzyme, F3'5'H, were wide ranging, extending from anthocyanins to other branches of the flavonoid pathway. The results illustrate the complexity involved in modifying a biosynthetic pathway with multiple branch points to different end products and provides important information for future flower colour modification experiments in cyclamen. PMID:20540805

Laser marking as environment technology

NASA Astrophysics Data System (ADS)

Sobotova, Lydia; Badida, Miroslav

2017-11-01

The contribution deals with the laser marking as one of the progressive and environment friendly technologies with utilisation in many branches of industry. Engraving and other types of laser marking of different types of materials are very actual technologies these days. Laser marking decreases the waste creation in comparison with the other classical marking technologies, which use paintings or created chips. In this experimental investigation the laser marking surface texturing of material AL99,7 according to STN 42 4003:1993-08 (STN EN 573) has been conducted. The laser marking machine TruMark 6020 and software TruTops Mark were used. Laser surface texturing after laser marking has been realised under different combinations of process parameters: pulse frequency, pulse energy and laser beam scanning speed. The morphological characterization of engraving or annealing surfaces has been performed using scanning electron microscopy (SEM) technique. The evaluation of roughness of engraved surfaces has been realized according to STN EN ISO 4287 by using Surftest SJ 301. The aim of the contribution was to show how different laser parameters affect the surface texture and colour change of metallic materials while creating minimal waste.

Constrained Response Surface Optimisation and Taguchi Methods for Precisely Atomising Spraying Process

NASA Astrophysics Data System (ADS)

Luangpaiboon, P.; Suwankham, Y.; Homrossukon, S.

2010-10-01

This research presents a development of a design of experiment technique for quality improvement in automotive manufacturing industrial. The quality of interest is the colour shade, one of the key feature and exterior appearance for the vehicles. With low percentage of first time quality, the manufacturer has spent a lot of cost for repaired works as well as the longer production time. To permanently dissolve such problem, the precisely spraying condition should be optimized. Therefore, this work will apply the full factorial design, the multiple regression, the constrained response surface optimization methods or CRSOM, and Taguchi's method to investigate the significant factors and to determine the optimum factor level in order to improve the quality of paint shop. Firstly, 2κ full factorial was employed to study the effect of five factors including the paint flow rate at robot setting, the paint levelling agent, the paint pigment, the additive slow solvent, and non volatile solid at spraying of atomizing spraying machine. The response values of colour shade at 15 and 45 degrees were measured using spectrophotometer. Then the regression models of colour shade at both degrees were developed from the significant factors affecting each response. Consequently, both regression models were placed into the form of linear programming to maximize the colour shade subjected to 3 main factors including the pigment, the additive solvent and the flow rate. Finally, Taguchi's method was applied to determine the proper level of key variable factors to achieve the mean value target of colour shade. The factor of non volatile solid was found to be one more additional factor at this stage. Consequently, the proper level of all factors from both experiment design methods were used to set a confirmation experiment. It was found that the colour shades, both visual at 15 and 45 angel of measurement degrees of spectrophotometer, were nearly closed to the target and the defective at quality gate was also reduced from 0.35 WDPV to 0.10 WDPV. This reveals that the objective of this research is met and this procedure can be used as quality improvement guidance for paint shop of automotive vehicle.

Improved image retrieval based on fuzzy colour feature vector

NASA Astrophysics Data System (ADS)

Ben-Ahmeida, Ahlam M.; Ben Sasi, Ahmed Y.

2013-03-01

One of Image indexing techniques is the Content-Based Image Retrieval which is an efficient way for retrieving images from the image database automatically based on their visual contents such as colour, texture, and shape. In this paper will be discuss how using content-based image retrieval (CBIR) method by colour feature extraction and similarity checking. By dividing the query image and all images in the database into pieces and extract the features of each part separately and comparing the corresponding portions in order to increase the accuracy in the retrieval. The proposed approach is based on the use of fuzzy sets, to overcome the problem of curse of dimensionality. The contribution of colour of each pixel is associated to all the bins in the histogram using fuzzy-set membership functions. As a result, the Fuzzy Colour Histogram (FCH), outperformed the Conventional Colour Histogram (CCH) in image retrieving, due to its speedy results, where were images represented as signatures that took less size of memory, depending on the number of divisions. The results also showed that FCH is less sensitive and more robust to brightness changes than the CCH with better retrieval recall values.

Water Discolouration Risk Mapping: a Regionally Mapped Model

NASA Astrophysics Data System (ADS)

Kirkby, M.; Arrell, K.; McDonald, A.; Tillotson, M.; Foulger, M.; Walker, A.

2006-12-01

Discolouration in catchment waters is caused by the release through oxidation, warming and biological decomposition of the soil. Catchments that yield highly discoloured waters not only increase treatment and sludge disposal costs but also risk compliance failures and increase the potential for Trihalomethane (THM) production; an unwanted byproduct of water chlorination. Therefore it is important for water companies to quantify and map water discolouration risk within their catchments to guide surveillance and intervention strategies. Yorkshire Water Services derives significant water resources from upland catchments. These catchments continue to produce increasing quantities of discolouration which are problematic and costly to treat. The company is taking several initiatives to manage colour. Traditional water colour studies tend to be restricted in scale and are unable to make conclusions about water colour production within a region. Sensitivities of water colour production to feedbacks and interactions between multiple factors also remains largely unquantified. This research addressed these limitations and mapped water discolouration risk for the Yorkshire Water area. Many factors are believed to influence colour production within a catchment. These are divided into two groups: dynamic factors for example, drought frequency, duration and severity or changes in the levels of acid precipitation; and static factors that are catchment specific, such as land management techniques, slope, soil type and erosion. A map of discolouration risk was created by sourcing and combining data for each of these variables. Data were categorised as either factors or constraints on water colour production and combined in a series of weighted overlays within a GIS, reflecting recent research on the processes leading to water colour production. Resulting risk maps identified a large variability in risk throughout study catchments. Analyses were also undertaken to examine the sensitivities of these distributions to changing land management techniques which will in turn inform Yorkshire Water of potential strategies towards the reduction of water discolouration.

Analytical characterization of glass tesserae from mosaics of early Christian basilicas in Albania

NASA Astrophysics Data System (ADS)

Vataj, Esmeralda; Hobdari, Elio; Röhrs, Stefan; Vandenabele, Peter; Civici, Nikolla

2017-01-01

The present paper constitutes the first archaeometric study of the glass mosaic tesserae recovered from the archaeological excavation of the mosaics at the Early Christian basilicas in Bylis, Lin and Elbasan, belonging to fifth to sixth century AD. The main objective of the study is the characterization of the materials, glass matrix, colourants and opacifiers used for their production. A multi-analytical approach, which includes optical microscopy, scanning electron microscopy equipped with energy-dispersive spectrometer, micro-X-ray fluorescence and Raman spectroscopy, is used during the investigation of 72 tesserae of different colours collected from the three sites. All the tesserae are opaque and have heterogeneous surfaces with several bubbles and crystalline inclusions. Most of the glass tesserae have the characteristic soda-lime-silica composition, and low concentrations of potash and magnesium indicate natron as soda source, which is typical for the Roman glass. Compounds containing Mn, Fe, Cu, Co, Pb and Sn are used as colourants in the tesserae of different colours. Mineral inclusions are mostly composed of undissolved raw materials, i.e., silicon-, calcium- and tin-rich particles. It is interesting to notice that SnO2 has been used as opacifier in all the tesserae. Thin layers of Au foil placed between two transparent glasses are identified in the gold-coloured tesserae.

Cross-linking gold nanoparticles aggregation method based on localised surface plasmon resonance for quantitative detection of miR-155.

PubMed

Esmaeili-Bandboni, Aghil; Amini, Seyed Mohammad; Faridi-Majidi, Reza; Bagheri, Jamshid; Mohammadnejad, Javad; Sadroddiny, Esmaeil

2018-06-01

MiR-155 plays a critical role in the formation of cancers and other diseases. In this study, the authors aimed to design and fabricate a biosensor based on cross-linking gold nanoparticles (AuNPs) aggregation for the detection and quantification of miR-155. Also, they intended to compare this method with SYBR Green real-time polymerase chain reaction (PCR). Primers for real-time PCR, and two thiolated capture probes for biosensor, complementary with miR-155, were designed. Citrate capped AuNPs (18.7 ± 3.6 nm) were synthesised and thiolated capture probes immobilised to AuNPs. The various concentrations of synthetic miR-155 were measured by this biosensor and real-time PCR method. Colorimetric changes were studied, and the calibration curves were plotted. Results showed the detection limit of 10 nM for the fabricated biosensor and real-time PCR. Also, eye detection using colour showed the weaker detection limit (1 µM), for this biosensor. MiR-133b as the non-complementary target could not cause a change in both colour and UV-visible spectrum. The increase in hydrodynamic diameter and negative zeta potential of AuNPs after the addition of probes verified the biosensor accurately fabricated. This fabricated biosensor could detect miR-155 simpler and faster than previous methods.

Incidental learning of probability information is differentially affected by the type of visual working memory representation.

PubMed

van Lamsweerde, Amanda E; Beck, Melissa R

2015-12-01

In this study, we investigated whether the ability to learn probability information is affected by the type of representation held in visual working memory. Across 4 experiments, participants detected changes to displays of coloured shapes. While participants detected changes in 1 dimension (e.g., colour), a feature from a second, nonchanging dimension (e.g., shape) predicted which object was most likely to change. In Experiments 1 and 3, items could be grouped by similarity in the changing dimension across items (e.g., colours and shapes were repeated in the display), while in Experiments 2 and 4 items could not be grouped by similarity (all features were unique). Probability information from the predictive dimension was learned and used to increase performance, but only when all of the features within a display were unique (Experiments 2 and 4). When it was possible to group by feature similarity in the changing dimension (e.g., 2 blue objects appeared within an array), participants were unable to learn probability information and use it to improve performance (Experiments 1 and 3). The results suggest that probability information can be learned in a dimension that is not explicitly task-relevant, but only when the probability information is represented with the changing dimension in visual working memory. (c) 2015 APA, all rights reserved).

Salt efflorescence due to water-rock interaction on the surface of tuff cave in the Yoshimi-Hyakuana Historic Site, central Japan

NASA Astrophysics Data System (ADS)

Oguchi, Chiaki T.; Kodama, Shogo; Mohammad, Rajib; Tharanga Udagedara, Dashan

2016-04-01

Artificial cave walls in Yoshimi Hyakuana Historic Site have been suffering from salt weathering since 1945 when the caves were made. To consider the processes of weathering and subsequent crystallization of secondary minerals, water-rock experiment using tuff from this area was performed. Rocks, surface altered materials, groundwater and rainwater were collected, and chemical and mineralogical characteristics of those samples were investigated. The XRD and SEM-EDS analyses were carried out for the solid samples and ICP-OES analysis was performed for the solution generated from the experiment, groundwater and rainwater. Gypsum is detected in original tuff, and on grey and whiter coloured altered materials. General chemical changes were observed on this rock. However, it is found that purple and black altered materials were mainly made due to microbiological processes.

Natural dyeing and UV protection of plasma treated cotton

NASA Astrophysics Data System (ADS)

Gorjanc, Marija; Mozetič, Miran; Vesel, Alenka; Zaplotnik, Rok

2018-03-01

Raw cotton fabrics have been exposed to low-pressure non-equilibrium gaseous plasma to improve the adsorption of natural dyes as well as ultraviolet (UV) protection factor. Plasma created in a glass tube by an electrodeless radiofrequency (RF) discharge was created either in oxygen or ammonia at the pressure of 50 Pa to stimulate formation of oxygen and nitrogen groups, respectively. The type and concentration of functional groups was determined by X-ray photoelectron spectroscopy (XPS) and morphological modifications by scanning electron microscopy (SEM). The colour yield for curcumin dye was improved significantly for samples treated with ammonia plasma what was explained by bonding of the dye to surface of amino groups. Contrary, the yield decreased when oxygen plasma treatment was applied due to the negatively charged surface that repels the negatively charged dye molecules. The effect was even more pronounced when using green tea extract as the colouring agent. The colour difference between the untreated and ammonia plasma treated sample increased linearly with plasma treatment time reaching the factor of 3.5 for treatment time of 300 s. The ultraviolet protection factor (UPF) was over 50 indicating excellent protection due to improved adsorption of the dye on the ammonia plasma treated samples.

Optimisation approaches for concurrent transmitted light imaging during confocal microscopy.

PubMed

Collings, David A

2015-01-01

The transmitted light detectors present on most modern confocal microscopes are an under-utilised tool for the live imaging of plant cells. As the light forming the image in this detector is not passed through a pinhole, out-of-focus light is not removed. It is this extended focus that allows the transmitted light image to provide cellular and organismal context for fluorescence optical sections generated confocally. More importantly, the transmitted light detector provides images that have spatial and temporal registration with the fluorescence images, unlike images taken with a separately-mounted camera. Because plants often provide difficulties for taking transmitted light images, with the presence of pigments and air pockets in leaves, this study documents several approaches to improving transmitted light images beginning with ensuring that the light paths through the microscope are correctly aligned (Köhler illumination). Pigmented samples can be imaged in real colour using sequential scanning with red, green and blue lasers. The resulting transmitted light images can be optimised and merged in ImageJ to generate colour images that maintain registration with concurrent fluorescence images. For faster imaging of pigmented samples, transmitted light images can be formed with non-absorbed wavelengths. Transmitted light images of Arabidopsis leaves expressing GFP can be improved by concurrent illumination with green and blue light. If the blue light used for YFP excitation is blocked from the transmitted light detector with a cheap, coloured glass filters, the non-absorbed green light will form an improved transmitted light image. Changes in sample colour can be quantified by transmitted light imaging. This has been documented in red onion epidermal cells where changes in vacuolar pH triggered by the weak base methylamine result in measurable colour changes in the vacuolar anthocyanin. Many plant cells contain visible levels of pigment. The transmitted light detector provides a useful tool for documenting and measuring changes in these pigments while maintaining registration with confocal imaging.

Modification of flower colour by suppressing β-ring carotene hydroxylase genes in Oncidium.

PubMed

Wang, H-M; To, K-Y; Lai, H-M; Jeng, S-T

2016-03-01

Oncidium 'Gower Ramsey' (Onc. GR) is a popular cut flower, but its colour is limited to bright yellow. The β-ring carotene hydroxylase (BCH2) gene is involved in carotenoid biogenesis for pigment formation. However, the role of BCH2 in Onc. GR is poorly understood. Here, we investigated the functions of three BCH2 genes, BCH-A2, BCH-B2 and BCH-C2 isolated from Onc. GR, to analyse their roles in flower colour. RT-PCR expression profiling suggested that BCH2 was mainly expressed in flowers. The expression of BCH-B2 remained constant while that of BCH-A2 gradually decreased during flower development. Using Agrobacterium tumefaciens to introduce BCH2 RNA interference (RNAi), we created transgenic Oncidium plants with down-regulated BCH expression. In the transgenic plants, flower colour changed from the bright yellow of the wild type to light and white-yellow. BCH-A2 and BCH-B2 expression levels were significantly reduced in the transgenic flower lips, which make up the major portion of the Oncidium flower. Sectional magnification of the flower lip showed that the amount of pigmentation in the papillate cells of the adaxial epidermis was proportional to the intensity of yellow colouration. HPLC analyses of the carotenoid composition of the transgenic flowers suggested major reductions in neoxanthin and violaxanthin. In conclusion, BCH2 expression regulated the accumulation of yellow pigments in the Oncidium flower, and the down-regulation of BCH-A2 and BCH-B2 changed the flower colour from bright yellow to light and white-yellow. © 2015 German Botanical Society and The Royal Botanical Society of the Netherlands.

Plants and colour: Flowers and pollination

NASA Astrophysics Data System (ADS)

Miller, Renee; Owens, Simon J.; Rørslett, Bjørn

2011-03-01

While there is a range of colours found in plants the predominant colour is green. Pigments in plants have several roles e.g. photosynthesis and signalling. If colour is to be used as a signal then it must stand out from green. However, one should be aware that there are also coloured compounds where we have not yet fully investigated the role of colour in their functions—they may have roles in, for example, defence or heat exchange. In this paper, we will describe the basic chemistry of the major pigments found in plants and especially floral pigments. We will then discuss their locations in parts of the flower (such as sepals, petals, pollen and nectar), the cells in which they are found and their sub-cellular locations. Floral pigments have a large role to play in pollination of flowers by animals. They can and are modified in many ways during the development of flowers in nature, for example, at emergence and post-pollination. There are a range of biochemical mechanisms of colour change both within flowers and in isolated pigments. Some of the factors influencing colour are temperature, co-pigments, pH, metals, sugars, anthocyanin stacking and cell shape. There is a renewed interest in analysing floral pigments and how they are modified partly because of advances in recombinant DNA technologies, but also because of pollinators and their significance to biodiversity and for evolutionary studies. There is continued strong interest from the horticultural industry for the introduction of new colours e.g. the blue rose and for the exploitation of natural dyes. Funding in this area may impact future research in a potentially beneficial way but it must not deflect us from science-based conservation.

Ineffective crypsis in a crab spider: a prey community perspective

PubMed Central

Brechbühl, Rolf; Casas, Jérôme; Bacher, Sven

2010-01-01

Cryptic coloration is assumed to be beneficial to predators because of an increased encounter rate with unwary prey. This hypothesis is, however, very rarely, if ever, studied in the field. The aim of this study was to quantify the encounter rate and capture success of an ambush predator, in the field, as a function of its level of colour-matching with the background. We used the crab spider Misumena vatia, which varies its body colour and can thereby match the colour of the flower it hunts upon. We carried out a manipulative field experiment using a complete factorial design resulting in six different colour combinations of crab spiders and flowers differing in their degree of colour-matching. A rich and diverse set of naturally occurring insects visited the flowers while we continuously video-recorded the spider's foraging activity. This enabled us to test the crypsis, the spider avoidance and the flower visitor attraction hypotheses, all three supported by previous studies. Flower visitors of different groups either avoided crab spiders independent of colour-matching, such as solitary bees and syrphid flies, or ignored them, such as bumble-bees and honeybees. Moreover, colour-matched spiders did not have a higher encounter rate and capture success compared to the visually apparent ones. Thus, our results support the spider avoidance hypothesis, reject the two other hypotheses and uncovered a fourth behaviour: indifference to predators. Because flower visitors reacted differently, a community approach is mandatory in order to understand the function of background colour-matching in generalist predators. We discuss our results in relation to the size and sociality of the prey and in relation to the functional significance of colour change in this predator. PMID:19889699

Ineffective crypsis in a crab spider: a prey community perspective.

PubMed

Brechbühl, Rolf; Casas, Jérôme; Bacher, Sven

2010-03-07

Cryptic coloration is assumed to be beneficial to predators because of an increased encounter rate with unwary prey. This hypothesis is, however, very rarely, if ever, studied in the field. The aim of this study was to quantify the encounter rate and capture success of an ambush predator, in the field, as a function of its level of colour-matching with the background. We used the crab spider Misumena vatia, which varies its body colour and can thereby match the colour of the flower it hunts upon. We carried out a manipulative field experiment using a complete factorial design resulting in six different colour combinations of crab spiders and flowers differing in their degree of colour-matching. A rich and diverse set of naturally occurring insects visited the flowers while we continuously video-recorded the spider's foraging activity. This enabled us to test the crypsis, the spider avoidance and the flower visitor attraction hypotheses, all three supported by previous studies. Flower visitors of different groups either avoided crab spiders independent of colour-matching, such as solitary bees and syrphid flies, or ignored them, such as bumble-bees and honeybees. Moreover, colour-matched spiders did not have a higher encounter rate and capture success compared to the visually apparent ones. Thus, our results support the spider avoidance hypothesis, reject the two other hypotheses and uncovered a fourth behaviour: indifference to predators. Because flower visitors reacted differently, a community approach is mandatory in order to understand the function of background colour-matching in generalist predators. We discuss our results in relation to the size and sociality of the prey and in relation to the functional significance of colour change in this predator.

Analysis of the color rendition of flexible endoscopes

NASA Astrophysics Data System (ADS)

Murphy, Edward M.; Hegarty, Francis J.; McMahon, Barry P.; Boyle, Gerard

2003-03-01

Endoscopes are imaging devices routinely used for the diagnosis of disease within the human digestive tract. Light is transmitted into the body cavity via incoherent fibreoptic bundles and is controlled by a light feedback system. Fibreoptic endoscopes use coherent fibreoptic bundles to provide the clinician with an image. It is also possible to couple fibreoptic endoscopes to a clip-on video camera. Video endoscopes consist of a small CCD camera, which is inserted into gastrointestinal tract, and associated image processor to convert the signal to analogue RGB video signals. Images from both types of endoscope are displayed on standard video monitors. Diagnosis is dependent upon being able to determine changes in the structure and colour of tissues and biological fluids, and therefore is dependent upon the ability of the endoscope to reproduce the colour of these tissues and fluids with fidelity. This study investigates the colour reproduction of flexible optical and video endoscopes. Fibreoptic and video endoscopes alter image colour characteristics in different ways. The colour rendition of fibreoptic endoscopes was assessed by coupling them to a video camera and applying video colorimetric techniques. These techniques were then used on video endoscopes to assess how the colour rendition of video endoscopes compared with that of optical endoscopes. In both cases results were obtained at fixed illumination settings. Video endoscopes were then assessed with varying levels of illumination. Initial results show that at constant luminance endoscopy systems introduce non-linear shifts in colour. Techniques for examining how this colour shift varies with illumination intensity were developed and both methodology and results will be presented. We conclude that more rigorous quality assurance is required to reduce colour error and are developing calibration procedures applicable to medical endoscopes.

Vertical structure of aeolian turbulence in a boundary layer with sand transport

NASA Astrophysics Data System (ADS)

Lee, Zoe S.; Baas, Andreas C. W.

2016-04-01

Recently we have found that Reynolds shear stress shows a significant variability with measurement height (Lee and Baas, 2016), and so an alternative parameter for boundary layer turbulence may help to explain the relationship between wind forcing and sediment transport. We present data that were collected during a field study of boundary layer turbulence conducted on a North Atlantic beach. High-frequency (50 Hz) 3D wind velocity measurements were collected using ultrasonic anemometry at thirteen different measurement heights in a tight vertical array between 0.11 and 1.62 metres above the surface. Thanks to the high density installation of sensors a detailed analysis of the boundary layer flow can be conducted using methods more typically used in studies where data is only available from one or just a few measurement heights. We use quadrant analysis to explore the vertical structure of turbulence and track the changes in quadrant signatures with measurement elevation and over time. Results of quadrant analysis, at the 'raw' 50 Hz timescale, demonstrates the tendency for event clustering across all four quadrants, which implies that at-a-point quadrant events are part of larger-scale turbulent structures. Using an HSV colour model, applied to the quadrant analysis data and plotted in series, we create colour maps of turbulence, which can provide a clear visualisation of the clustering of event activity at each height and illustrate the shape of the larger coherent flow structures that are present within the boundary layer. By including a saturation component to the colour model, the most significant stress producing sections of the data are emphasised. This results in a 'banded' colour map, which relates to clustering of quadrant I (Outward Interaction) and quadrant IV (Sweep) activity, separate from clustering of quadrant II (Burst) and quadrant III (Inward Interaction). Both 'sweep-type' and 'burst-type' sequences are shown to have a diagonal structure originating from the top of the boundary layer, indicating a downwards direction of eddy motion. While directionality of turbulence cannot be definitively determined, our results indicate that the top-down turbulence model is a suitable explanation, further supported by the presence of 'incomplete' eddies which originate at higher elevations but fail to extend to the surface. This provides the first evidence in support of a top down turbulence model as observed in aeolian geomorphology, and we present preliminary findings on its relationship to sand transport activity. Lee, Z.S., Baas, A.C.W. (2016) Variable and conflicting shear stress estimates inside a boundary layer with sediment transport. Earth Surface Processes and Landforms; DOI: 10.1002/esp.3829

What explains rare and conspicuous colours in a snail? A test of time-series data against models of drift, migration or selection.

PubMed

Johannesson, K; Butlin, R K

2017-01-01

It is intriguing that conspicuous colour morphs of a prey species may be maintained at low frequencies alongside cryptic morphs. Negative frequency-dependent selection by predators using search images ('apostatic selection') is often suggested without rejecting alternative explanations. Using a maximum likelihood approach we fitted predictions from models of genetic drift, migration, constant selection, heterozygote advantage or negative frequency-dependent selection to time-series data of colour frequencies in isolated populations of a marine snail (Littorina saxatilis), re-established with perturbed colour morph frequencies and followed for >20 generations. Snails of conspicuous colours (white, red, banded) are naturally rare in the study area (usually <10%) but frequencies were manipulated to levels of ~50% (one colour per population) in 8 populations at the start of the experiment in 1992. In 2013, frequencies had declined to ~15-45%. Drift alone could not explain these changes. Migration could not be rejected in any population, but required rates much higher than those recorded. Directional selection was rejected in three populations in favour of balancing selection. Heterozygote advantage and negative frequency-dependent selection could not be distinguished statistically, although overall the results favoured the latter. Populations varied idiosyncratically as mild or variable colour selection (3-11%) interacted with demographic stochasticity, and the overall conclusion was that multiple mechanisms may contribute to maintaining the polymorphisms.

GEMAS: Colours of dry and moist agricultural soil samples of Europe

NASA Astrophysics Data System (ADS)

Klug, Martin; Fabian, Karl; Reimann, Clemens

2016-04-01

High resolution HDR colour images of all Ap samples from the GEMAS survey were acquired using a GeoTek Linescan camera. Three measurements of dry and wet samples with increasing exposure time and increasing illumination settings produced a set of colour images at 50μm resolution. Automated image processing was used to calibrate the six images per sample with respect to the synchronously measured X-Rite colorchecker chart. The calibrated images were then fit to Munsell soil colours that were measured in the same way. The results provide overview maps of dry and moist European soil colours. Because colour is closely linked to iron mineralogy, carbonate, silicate and organic carbon content the results can be correlated to magnetic, mineralogical, and geochemical properties. In combination with the full GEMAS chemical and physical measurements, this yields a valuable data set for calibration and interpretation of visible satellite colour data with respect to chemical composition and geological background, soil moisture, and soil degradation. This data set will help to develop new methods for world-wide characterization and monitoring of agricultural soils which is essential for quantifying geologic and human impact on the critical zone environment. It furthermore enables the scientific community and governmental authorities to monitor consequences of climatic change, to plan and administrate economic and ecological land use, and to use the data set for forensic applications.

Short term supplementation rates to optimise vitamin E concentration for retail colour stability of Australian lamb meat.

PubMed

Jose, C G; Jacob, R H; Pethick, D W; Gardner, G E

2016-01-01

The relationship between vitamin E supplementation rate and colour stability was investigated using 70 mixed sex 6-8 month old crossbred lambs. An initial group of 10 were slaughtered, while the remainder were fed a pellet ration containing either 30, 150, 275 or 400 IU vitamin E/kg ration or on green pasture for 56 days. After slaughter, carcases were halved; one side packed fresh (5 days) and the other in CO2 (21 days), both at 2°C. Five muscles were set for retail display for 96 h. The oxy/metmyoglobin ratio was measured every 12 h. Colour stability increased with increasing muscle vitamin E until an apparent maximum effect for vitamin E concentration (3.5-4.0mg α-tocopherol/kg tissue) was reached beyond which no further response was evident. This was reached within 3-4 weeks (275 IU treatment), and meat from these lambs should reach 60 h retail display with a satisfactory surface colour. This effect was most apparent in aerobic muscle types and meat aged post slaughter. Copyright © 2015 Elsevier Ltd. All rights reserved.

Second-order statistics of colour codes modulate transformations that effectuate varying degrees of scene invariance and illumination invariance.

PubMed

Mausfeld, Rainer; Andres, Johannes

2002-01-01

We argue, from an ethology-inspired perspective, that the internal concepts 'surface colours' and 'illumination colours' are part of the data format of two different representational primitives. Thus, the internal concept of 'colour' is not a unitary one but rather refers to two different types of 'data structure', each with its own proprietary types of parameters and relations. The relation of these representational structures is modulated by a class of parameterised transformations whose effects are mirrored in the idealised computational achievements of illumination invariance of colour codes, on the one hand, and scene invariance, on the other hand. Because the same characteristics of a light array reaching the eye can be physically produced in many different ways, the visual system, then, has to make an 'inference' whether a chromatic deviation of the space-averaged colour codes from the neutral point is due to a 'non-normal', ie chromatic, illumination or due to an imbalanced spectral reflectance composition. We provide evidence that the visual system uses second-order statistics of chromatic codes of a single view of a scene in order to modulate corresponding transformations. In our experiments we used centre surround configurations with inhomogeneous surrounds given by a random structure of overlapping circles, referred to as Seurat configurations. Each family of surrounds has a fixed space-average of colour codes, but differs with respect to the covariance matrix of colour codes of pixels that defines the chromatic variance along some chromatic axis and the covariance between luminance and chromatic channels. We found that dominant wavelengths of red-green equilibrium settings of the infield exhibited a stable and strong dependence on the chromatic variance of the surround. High variances resulted in a tendency towards 'scene invariance', low variances in a tendency towards 'illumination invariance' of the infield.

Biomimetic virus-based colourimetric sensors.

PubMed

Oh, Jin-Woo; Chung, Woo-Jae; Heo, Kwang; Jin, Hyo-Eon; Lee, Byung Yang; Wang, Eddie; Zueger, Chris; Wong, Winnie; Meyer, Joel; Kim, Chuntae; Lee, So-Young; Kim, Won-Geun; Zemla, Marcin; Auer, Manfred; Hexemer, Alexander; Lee, Seung-Wuk

2014-01-01

Many materials in nature change colours in response to stimuli, making them attractive for use as sensor platform. However, both natural materials and their synthetic analogues lack selectivity towards specific chemicals, and introducing such selectivity remains a challenge. Here we report the self-assembly of genetically engineered viruses (M13 phage) into target-specific, colourimetric biosensors. The sensors are composed of phage-bundle nanostructures and exhibit viewing-angle independent colour, similar to collagen structures in turkey skin. On exposure to various volatile organic chemicals, the structures rapidly swell and undergo distinct colour changes. Furthermore, sensors composed of phage displaying trinitrotoluene (TNT)-binding peptide motifs identified from a phage display selectively distinguish TNT down to 300 p.p.b. over similarly structured chemicals. Our tunable, colourimetric sensors can be useful for the detection of a variety of harmful toxicants and pathogens to protect human health and national security.

Biomimetic virus-based colourimetric sensors

NASA Astrophysics Data System (ADS)

Oh, Jin-Woo; Chung, Woo-Jae; Heo, Kwang; Jin, Hyo-Eon; Lee, Byung Yang; Wang, Eddie; Zueger, Chris; Wong, Winnie; Meyer, Joel; Kim, Chuntae; Lee, So-Young; Kim, Won-Geun; Zemla, Marcin; Auer, Manfred; Hexemer, Alexander; Lee, Seung-Wuk

2014-01-01

Many materials in nature change colours in response to stimuli, making them attractive for use as sensor platform. However, both natural materials and their synthetic analogues lack selectivity towards specific chemicals, and introducing such selectivity remains a challenge. Here we report the self-assembly of genetically engineered viruses (M13 phage) into target-specific, colourimetric biosensors. The sensors are composed of phage-bundle nanostructures and exhibit viewing-angle independent colour, similar to collagen structures in turkey skin. On exposure to various volatile organic chemicals, the structures rapidly swell and undergo distinct colour changes. Furthermore, sensors composed of phage displaying trinitrotoluene (TNT)-binding peptide motifs identified from a phage display selectively distinguish TNT down to 300 p.p.b. over similarly structured chemicals. Our tunable, colourimetric sensors can be useful for the detection of a variety of harmful toxicants and pathogens to protect human health and national security.

Land Cover Analysis by Using Pixel-Based and Object-Based Image Classification Method in Bogor

NASA Astrophysics Data System (ADS)

Amalisana, Birohmatin; Rokhmatullah; Hernina, Revi

2017-12-01

The advantage of image classification is to provide earth’s surface information like landcover and time-series changes. Nowadays, pixel-based image classification technique is commonly performed with variety of algorithm such as minimum distance, parallelepiped, maximum likelihood, mahalanobis distance. On the other hand, landcover classification can also be acquired by using object-based image classification technique. In addition, object-based classification uses image segmentation from parameter such as scale, form, colour, smoothness and compactness. This research is aimed to compare the result of landcover classification and its change detection between parallelepiped pixel-based and object-based classification method. Location of this research is Bogor with 20 years range of observation from 1996 until 2016. This region is famous as urban areas which continuously change due to its rapid development, so that time-series landcover information of this region will be interesting.

Microscopic origin of the optical processes in blue sapphire.

PubMed

Bristow, Jessica K; Parker, Stephen C; Catlow, C Richard A; Woodley, Scott M; Walsh, Aron

2013-06-11

Al2O3 changes from transparent to a range of intense colours depending on the chemical impurities present. In blue sapphire, Fe and Ti are incorporated; however, the chemical process that gives rise to the colour has long been debated. Atomistic modelling identifies charge transfer from Ti(III) to Fe(III) as being responsible for the characteristic blue appearance.

Neural control of tuneable skin iridescence in squid

PubMed Central

Wardill, T. J.; Gonzalez-Bellido, P. T.; Crook, R. J.; Hanlon, R. T.

2012-01-01

Fast dynamic control of skin coloration is rare in the animal kingdom, whether it be pigmentary or structural. Iridescent structural coloration results when nanoscale structures disrupt incident light and selectively reflect specific colours. Unlike animals with fixed iridescent coloration (e.g. butterflies), squid iridophores (i.e. aggregations of iridescent cells in the skin) produce dynamically tuneable structural coloration, as exogenous application of acetylcholine (ACh) changes the colour and brightness output. Previous efforts to stimulate iridophores neurally or to identify the source of endogenous ACh were unsuccessful, leaving researchers to question the activation mechanism. We developed a novel neurophysiological preparation in the squid Doryteuthis pealeii and demonstrated that electrical stimulation of neurons in the skin shifts the spectral peak of the reflected light to shorter wavelengths (greater than 145 nm) and increases the peak reflectance (greater than 245%) of innervated iridophores. We show ACh is released within the iridophore layer and that extensive nerve branching is seen within the iridophore. The dynamic colour shift is significantly faster (17 s) than the peak reflectance increase (32 s), revealing two distinct mechanisms. Responses from a structurally altered preparation indicate that the reflectin protein condensation mechanism explains peak reflectance change, while an undiscovered mechanism causes the fast colour shift. PMID:22896651

Dynamics of colour polymorphism in a changing environment: fire melanism and then what?

PubMed

Karlsson, Magnus; Caesar, Sofia; Ahnesjö, Jonas; Forsman, Anders

2008-01-01

Studies of whether disturbance events are associated with the changing genetic compositions of natural populations may provide insights into the importance of local selection events in maintaining diversity, and might inform plans for the conservation and protection of that diversity. We examined the dynamics of a colour pattern polymorphism in a natural population of pygmy grasshoppers Tetrix subulata (Orthoptera: Tetrigidae) inhabiting a previously burnt clear-cut area. Data on morph frequencies for wild-caught and captive-reared individuals indicated that the initial dominance of black phenotypes following the fire event was followed by an increased diversity of the polymorphism. This was manifested as the appearance of a novel morph, a decreased incidence of the black morph, and a more even distribution of individuals across alternative morphs following the recurrence of vegetation. We also found that the colour patterns of captive-reared individuals resembled those of their parents and that the degree of within-clutch diversity increased between generations. Our comparisons of morph frequencies across generations and between environments within generations point to a genetic determination of colour pattern, and indicate that the polymorphism is influenced more strongly by selection than by plasticity or migration.