Divergent opinions on surface disinfection: myths or prevention? A review of the literature.

PubMed

Exner, Martin

2007-09-13

Virtually no prevention strategy in hospital hygiene has been the focus of such frequent controversial discussions as the role of surface disinfection. Set against that background, the Commission for Hospital Hygiene and Infection Prevention at the Robert Koch Institute founded a working group comprising members with divergent views of risk evaluation as regards the role of disinfection. This working group produced a most carefully drafted guideline on how to deal with various risk areas and also incorporated a new provision into the guideline, stating that: "Cleaning and disinfection procedures must be organized and implemented such that there is no increase in the microbial load or spread of facultatively pathogenic or pathogenic microorganisms on surfaces."Numerous studies have come to the conclusion that surface disinfection constitutes a basic infection control measure with which the spread of pathogens can be controlled. Conversely, when using only detergents such a form of control is not possible, something that must be taken into account in future when engaging in risk evaluation and formulating infection control measures. In view of the burgeoning trend in, for example, norovirus outbreaks, also in hospitals and nursing homes, such insights are of paramount importance and attest to the need for disinfection of surfaces and of areas with frequent hand and skin contacts. This discussion about the need for surface disinfection has, in addition to causing confusion among users, led to a decline in the willingness to accept hygienic practices, thus increasing the risk of occurrence of nosocomial infections as well as of antibiotic-resistant microorganisms.

Characterization of Extracellular Polymeric Substances Produced by Pseudomonas fragi Under Air and Modified Atmosphere Packaging.

PubMed

Wang, Guang-Yu; Ma, Fang; Wang, Hu-Hu; Xu, Xing-Lian; Zhou, Guang-Hong

2017-09-01

Extracellular polymeric substances (EPS) play an important role in bacterial biochemical properties. The characteristics of EPS from 2 strains of Pseudomonas fragi cultured in meat aerobically (control) and in modified atmosphere packaging (MAP) were studied. The amount and components of EPS, the surface properties, and the effect on biofilm formation of several spoilage organisms were evaluated. The results showed that MAP inhibited the growth of the P. fragi strains. Compared with the control, more loose and less bound EPS (containing protein and carbohydrate) were produced by P. fragi in MAP samples. MAP also caused increased cell autoaggregation and surface hydrophobicity. After the removal of the EPS, the surface property changes were strain-dependent, suggesting that membrane compositions were also changed. In addition, the EPS displayed significant antibiofilm activity on Pseudomonas fluorescens and Serratia liquefaciens. In conclusion, P. fragi strains not only modified the amount, components, and surface properties of EPS but also changed the cell membrane compositions to adapt to MAP stress. Moreover, EPS may play an important role in microbial community competitions. © 2017 Institute of Food Technologists®.

Results of the Komplast experiment on the long-term exposure of materials specimens on the ISS surface

NASA Astrophysics Data System (ADS)

Shumov, A. E.; Novikov, L. S.; Shaevich, S. K.; Aleksandrov, N. G.; Smirnova, T. N.; Nikishin, E. F.; Chernik, V. N.; Petukhov, V. P.; Voronina, E. N.; Sedov, V. V.; Salnikova, I. A.; Babaevskiy, P. G.; Kozlov, N. A.; Deev, I. S.; Startsev, O. V.; Shindo, D. J.; Golden, J. L.; Kravchenko, M.

2015-11-01

The Komplast materials experiment was designed by Khrunichev State Research and Production Space Center together with Skobeltsyn Institute of Nuclear Physics, Lomonosov Moscow State University and other Russian scientific institutes, and has been carried out by Mission Control Moscow since 1998. The purpose of this experiment is to study the complex effect of the low Earth orbit environment on samples of various spacecraft materials. On November 20, 1998 the Komplast experiment began with the launch of the first International Space Station module Zarya, or Functional Cargo Block (FGB). Eight Komplast panels with samples of materials and sensors were installed on the outer surface of FGB module. Two of eight experiment panels were retrieved during Russian extravehicular activity in February 2011 after 12 years of space exposure and were subsequently returned to Earth by Space Shuttle "Discovery" on the STS-133/ULF-5 mission in March 2011. The article presents the results obtained from this unique long-duration experiment on board of the International Space Station.

Quality Control Methodology Of A Surface Wind Observational Database In North Eastern North America

NASA Astrophysics Data System (ADS)

Lucio-Eceiza, Etor E.; Fidel González-Rouco, J.; Navarro, Jorge; Conte, Jorge; Beltrami, Hugo

2016-04-01

This work summarizes the design and application of a Quality Control (QC) procedure for an observational surface wind database located in North Eastern North America. The database consists of 526 sites (486 land stations and 40 buoys) with varying resolutions of hourly, 3 hourly and 6 hourly data, compiled from three different source institutions with uneven measurement units and changing measuring procedures, instrumentation and heights. The records span from 1953 to 2010. The QC process is composed of different phases focused either on problems related with the providing source institutions or measurement errors. The first phases deal with problems often related with data recording and management: (1) compilation stage dealing with the detection of typographical errors, decoding problems, site displacements and unification of institutional practices; (2) detection of erroneous data sequence duplications within a station or among different ones; (3) detection of errors related with physically unrealistic data measurements. The last phases are focused on instrumental errors: (4) problems related with low variability, placing particular emphasis on the detection of unrealistic low wind speed records with the help of regional references; (5) high variability related erroneous records; (6) standardization of wind speed record biases due to changing measurement heights, detection of wind speed biases on week to monthly timescales, and homogenization of wind direction records. As a result, around 1.7% of wind speed records and 0.4% of wind direction records have been deleted, making a combined total of 1.9% of removed records. Additionally, around 15.9% wind speed records and 2.4% of wind direction data have been also corrected.

The use of a proteinaceous "cushion" with a polystyrene-binding peptide tag to control the orientation and function of a target peptide adsorbed to a hydrophilic polystyrene surface.

PubMed

Imanaka, Hiroyuki; Yamadzumi, Daisuke; Yanagita, Keisuke; Ishida, Naoyuki; Nakanishi, Kazuhiro; Imamura, Koreyoshi

2016-03-01

In immobilizing target biomolecules on a solid surface, it is essential (i) to orient the target moiety in a preferred direction and (ii) to avoid unwanted interactions of the target moiety including with the solid surface. The preferred orientation of the target moiety can be achieved by genetic conjugation of an affinity peptide tag specific to the immobilization surface. Herein, we report on a strategy for reducing the extent of direct interaction between the target moiety and surface in the immobilization of hexahistidine peptide (6His) and green fluorescent protein (GFP) on a hydrophilic polystyrene (PS) surface: Ribonuclease HII from Thermococcus kodakaraensis (cHII) was genetically inserted as a "cushion" between the PS-affinity peptide tag and target moiety. The insertion of a cushion protein resulted in a considerably stronger immobilization of target biomolecules compared to conjugation with only a PS affinity peptide tag, resulting in a substantially enhanced accessibility of the detection antibody to the target 6His peptide. The fluorescent intensity of the GFP moiety was decreased by approximately 30% as the result of fusion with cHII and the PS-affinity peptide tag but was fully retained in the immobilization on the PS surface irrespective of the increased binding force. Furthermore, the fusion of cHII did not impair the stability of the target GFP moiety. Accordingly, the use of a proteinaceous cushion appears to be promising for the immobilization of functional biomolecules on a solid surface. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:527-534, 2016. © 2016 American Institute of Chemical Engineers.

Developing Navy Capability to Recover Forces in Chemical, Biological, and Radiological Hazard Environments

DTIC Science & Technology

2013-01-01

damage control; LHD flight deck and well deck operations; fleet surgical team; Afloat Training Group; Assault Craft Unit; Naval Surface Warfare Center ...Biological, Radiological and Nuclear School, and U.S. Army Edgewood Chemical Biological Center , Guidelines for Mass Casualty Decontamination During a HAZMAT...Policy Center of the RAND National Defense Research Institute, a federally funded research and development center sponsored by OSD, the Joint Staff

Variable Speed Hydrodynamic Model of an Auv Utilizing Cross Tunnel Thrusters

DTIC Science & Technology

2017-09-01

Institute NED North East Down NPS Naval Postgraduate School ODE Ordinary Differential Equation PUC Positional Uncertainty REMUS Remote Environmental Measuring ...in its depths. Rising autonomous systems such as the Remote Environmental Measuring Unit (REMUS) 100 vehicle represents not only a feat of...presented account for reduced control surface efficiency at low speeds and build an accurate representation of a REMUS AUV’s behavior while operating at

Significance of a soft-coagulation system with monopolar electrode for hepatectomy: A retrospective two-institution study by propensity analysis.

PubMed

Hamada, Takeomi; Nanashima, Atsushi; Yano, Koichi; Sumida, Yorihisa; Hiyoshi, Masahide; Imamura, Naoya; Tobinaga, Shuichi; Tsuchimochi, Yuki; Takeno, Shinsuke; Fujii, Yoshiro; Nagayasu, Takeshi

2017-09-01

The VIO soft-coagulation system (VIO) with a monopolar electrode is a novel hemostatic device that provides hemostasis by superficial contact at the bleeding site without carbonization. Because heat injury remains a concern, surgical records and postoperative liver dysfunction were retrospectively evaluated in a cohort study. Between September 2010 and March 2016, 322 patients underwent hepatectomy in which hemostatic devices were used at two institutions. Surgical results with use of VIO at one institute (VIO group) were compared with those without use of VIO at a second institute (control group), and propensity analysis was performed. In limited resection and segmentectomy or sectionectomy performed in the VIO group, the prevalence of liver cirrhosis was significantly higher and the operation time was significantly longer in comparison with the control group (p < 0.05). In all hepatectomies, postoperative levels of total bilirubin and aspartate or alanine transaminase tended to be increased and prothrombin activity tended to be lower in the VIO group in comparison with the control group (p < 0.05). The prevalence of hepatic failure in the VIO group was significantly higher in comparison with that in the control group (p < 0.05). In cases of segmentectomy or sectionectomy, blood loss was significantly increased in the VIO group in comparison with that in the control group (p < 0.05) Propensity score matching showed that although the surgical records and outcomes were not significantly different between the groups, postoperative liver dysfunction was significant in the VIO group in comparison with the control group (p < 0.05). Mild postoperative hepatic thermal injury with VIO was confirmed, and therefore, surgeons should take care when using the VIO system to make frequent wide resected cuts on the surface of the liver. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

An overview of biofunctionalization of metals in Japan

PubMed Central

Hanawa, Takao

2009-01-01

Surface modification is an important and predominant technique for obtaining biofunction and biocompatibility in metals for biomedical use. The surface modification technique is a process that changes the surface composition, structure and morphology of a material, leaving the bulk mechanical properties intact. A tremendous number of surface modification techniques using dry and wet processes to improve the hard tissue compatibility of titanium have been developed. Some are now commercially available. Most of these processes have been developed by Japanese institutions since the 1990s. A second approach is the immobilization of biofunctional molecules to the metal surface to control the adsorption of proteins and adhesion of cells, platelets and bacteria. The immobilization of poly(ethylene glycol) to a metal surface with electrodeposition and its effect on biofunction are reviewed. The creation of a metal–polymer composite is another way to obtain metal-based biofunctional materials. The relationship between the shear bonding strength and the chemical structure at the bonding interface of a Ti-segmentated polyurethane composite through a silane coupling agent is explained. PMID:19158014

Effectiveness of Current Practices for Disinfecting Medical Equipment in a Radiology Department.

PubMed

Hubble, William L; Turner, James Austin; Heuertz, Rita

2016-01-01

To evaluate the effectiveness of routine, daily disinfection practices on the control of microorganisms on nuclear medicine equipment in a radiology department. During phase 1, surface samples were collected from various sites in the nuclear medicine division of a radiology department at a single institution. These samples were transferred onto growth plates for evaluation and speciation by a clinical microbiologist. Collection sites that yielded potentially pathogenic bacteria or high numbers (> 100) of colonies of likely nonpathogenic bacteria were identified for resampling. During phase 2, secondary samples were taken at the resampling sites after disinfection. These secondary samples also were evaluated to determine the efficacy of the departmental disinfection practices on surface cleanliness. Phase 1 sampling identified 10 sites that harbored either potentially pathogenic bacteria or high numbers of likely nonpathogenic bacteria. Evaluation of postdisinfection samples indicated elimination of potentially pathogenic bacteria and reduction of likely nonpathogenic colonies. The variety of surfaces and equipment found in radiology departments can present unique challenges for effective disinfection. Porous materials and intricate imaging and peripheral devices require special consideration when designing and maintaining department cleaning policies. The disinfection practices in place at the institution were effective in reducing or eliminating bacteria; however, recolonization after cleaning was recognized as a possibility. Educating staff about the value of disinfecting contact surfaces between patients is necessary to achieve optimum sanitization in the radiology department. © 2016 American Society of Radiologic Technologists.

Proceedings of the Ship Control Systems Symposium (9th) Held in Bethesda, Maryland on 10-14 September 1990. Theme: Automation in Surface Ship Control Systems, Today’s Applications and Future Trends. Volume 5

DTIC Science & Technology

1990-09-14

at the Australian Maritime College, Launceston, Tasmania, Australia. He has taught at the Nautical Institute of Genoa, Italy and at the Istituto...SDr. 1.1. Knowles, Jr. PhD Kenneth A. Knowles, Jr. received his BME degree in Mechanical Engineering from the University of Virginia in 1963, and the...Exchange Officer assigned to the Royal Australian Navy. He has also participated in the research, development, test and evaluation of several advanced

Characteristics of a high-power RF source of negative hydrogen ions for neutral beam injection into controlled fusion devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abdrashitov, G. F.; Belchenko, Yu. I.; Gusev, I. A.

An injector of hydrogen atoms with an energy of 0.5–1 MeV and equivalent current of up to 1.5 A for purposes of controlled fusion research is currently under design at the Budker Institute of Nuclear Physics, Siberian Branch, Russian Academy of Sciences. Within this project, a multiple-aperture RF surface-plasma source of negative hydrogen ions is designed. The source design and results of experiments on the generation of a negative ion beam with a current of >1 A in the long-pulse mode are presented.

Indoor and Outdoor Surface-Growing Fungi Contamination at Higher Institutional Buildings in a Malaysian University

NASA Astrophysics Data System (ADS)

Er, C. M.; Sunar, N. M.; Leman, A. M.; Khalid, A.; Ali, R.; Zaidi, E.; Azhar, A. T. S.

2018-04-01

Surface-growing indoor and outdoor fungi were assessed using swabbing method to investigate the indoor contamination. The painted wall surface samples were collected from two institutional buildings (B1 and B2) of a university in southern Peninsular Malaysia; indoors and outdoors. The mould concentrations varied widely between indoor and outdoor surface samples of both buildings. The total indoor surface-growing mould concentration (8776.49 CFU/cm2) is significantly higher (p<0.05) than the total concentration of outdoor surface growing mould (209.91 CFU/cm2). Respectively, the mean concentration of indoor surface-growing mould (18920.13 CFU/cm2 for B1 and 3704.67 CFU/cm2 for B2) is significantly higher than their outdoor counterparts (99.95 CFU/cm2 for b1 and for 319.86 CFU/cm2 b2) at these buildings. Besides, various air quality parameters (relative humidity, temperature and air velocity) were also measured indoors and outdoors during the study and violation of the guideline provided by ICOP-IAQ 2010 were proven in indoor environment in both buildings. The results of this assessment showed that the indoor environments of both institutional buildings were contaminated by the surface-growing mould. It also suggested the faulty designs and/or usages of building material in these institutional buildings contributed toward the contamination. An innovative solution is needed to correct the problems.

Inhibitory activity of Paenibacillus polymyxa on the biofilm formation of Cronobacter spp. on stainless steel surfaces.

PubMed

Yang, Soonwook; Kim, Seonhwa; Ryu, Jee-Hoon; Kim, Hoikyung

2013-07-01

The objective of this study was to control the survival or biofilm formation of Cronobacter spp. on stainless steel surfaces using Paenibacillus polymyxa. The antibacterial activity of a cell-free culture supernatant (CFCS) of P. polymyxa against Cronobacter spp. was found to vary with P. polymyxa incubation time. Maximum activity occurred when P. polymyxa was incubated at 25 or 30 °C for 96 h. When the CFCS was introduced to Cronobacter spp. adhered to stainless steel strips at 25 °C for up to 72 h, the CFCS successfully inhibited Cronobacter biofilm formation. Additionally, stainless steel surfaces with a preformed P. polymyxa biofilm were exposed to Cronobacter spp. suspensions in PBS or 0.1% peptone water at 3, 5, or 7 log CFU/mL to facilitate its attachment. The Cronobacter population significantly decreased on this surface, regardless of inoculum level or carrier, when the P. polymyxa biofilm was present. However, the microbial population decreased within 6 h and remained unchanged thereafter when the surface was immersed in an inoculum suspended in 0.1% peptone water at 5 or 7 log CFU/mL. These results indicate that P. polymyxa is able to use a promising candidate competitive-exclusion microorganism to control Cronobacter spp. © 2013 Institute of Food Technologists®

40 CFR 194.41 - Active institutional controls.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Active institutional controls. 194.41... Assurance Requirements § 194.41 Active institutional controls. (a) Any compliance application shall include detailed descriptions of proposed active institutional controls, the controls' location, and the period of...

40 CFR 194.41 - Active institutional controls.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Active institutional controls. 194.41... Assurance Requirements § 194.41 Active institutional controls. (a) Any compliance application shall include detailed descriptions of proposed active institutional controls, the controls' location, and the period of...

40 CFR 194.41 - Active institutional controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Active institutional controls. 194.41... Assurance Requirements § 194.41 Active institutional controls. (a) Any compliance application shall include detailed descriptions of proposed active institutional controls, the controls' location, and the period of...

40 CFR 194.41 - Active institutional controls.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Active institutional controls. 194.41... Assurance Requirements § 194.41 Active institutional controls. (a) Any compliance application shall include detailed descriptions of proposed active institutional controls, the controls' location, and the period of...

40 CFR 194.41 - Active institutional controls.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Active institutional controls. 194.41... Assurance Requirements § 194.41 Active institutional controls. (a) Any compliance application shall include detailed descriptions of proposed active institutional controls, the controls' location, and the period of...

Geodesy and cartography methods of exploration of the outer planetary systems: Galilean satellites and Enceladus

NASA Astrophysics Data System (ADS)

Zubarev, Anatoliy; Kozlova, Natalia; Kokhanov, Alexander; Oberst, Jürgen; Nadezhdina, Irina; Patraty, Vyacheslav; Karachevtseva, Irina

Introduction. While Galilean satellites have been observed by different spacecrafts, including Pioneer, Voyager-1 and -2, Galileo, New Horizons, and Enceladus by Cassini and Voyager-2, only data from Galileo, Cassini and the two Voyagers are useful for precise mapping [1, 2]. For purposes of future missions to the system of outer planets we have re-computed the control point network of the Io, Ganymede and Enceladus to support spacecraft navigation and coordinate knowledge. Based on the control networks, we have produced global image mosaics and maps. Geodesy approach. For future mission Laplace-P we mainly focused on Ganymede which coverage is nearly complete except for polar areas (which includes multispectral data). However, large differences exist in data resolutions (minimum global resolution: 30 km/pixel). Only few areas enjoy coverage by highest resolution images, so we suggest to obtain regional Digital Elevation Models (DEMs) from stereo images for selected areas. Also using our special software, we provide calculation of illumination conditions of Ganymede surface in various representations [3]. Finally, we propose a careful evaluation of all available data from the previous Voyager and Galileo missions to re-determine geodetic control and rotation model for other Galilean satellites - Callisto and Europe. Mapping. Based on re-calculated control point networks and global mosaics we have prepared new maps for Io, Ganymede and Enceladus [4]. Due to the difference in resolution between the images, which were also taken from different angles relative to the surface, we can prepare only regional high resolution shape models, so for demonstrating of topography and mapping of the satellites we used orthographic projection with different parameters. Our maps, which include roughness calculations based on our GIS technologies [5], will also be an important tool for studies of surface morphology. Conclusions. Updated data collection, including new calculation of elements of external orientation, provides new image processing of previous missions to outer planetary system. Using Photomod software (http://www.racurs.ru/) we have generated a new control point network in 3-D and orthomosaics for Io, Ganymede and Enceladus. Based on improved orbit data for Galileo we have used larger numbers of images than were available before, resulting in a more rigid network for Ganymede. The obtained results will be used for further processing and improvement of the various parameters: body shape parameters and shape modeling, libration, as well as for studying of the surface interesting geomorphological phenomena, for example, distribution of bright and dark surface materials on Ganymede and their correlations with topography and slopes [6]. Acknowledgments: The Ganymede study was partly supported by ROSKOSMOS and Space Research Institute under agreement No. 36/13 “Preliminary assessment of the required coordinate and navigation support for selection of landing sites for lander mission “Laplace” and partly funding by agreement No. 11-05-91323 for “Geodesy, cartography and research satellites Phobos and Deimos” References: [1] Nadezhdina et al. Vol. 14, EGU2012-11210, 2012. [2] Zhukov et al. International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments", Space Research Institute, Moscow, Russia, 4-8 March, 2013. [3] Zubarev et al. International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments", Space Research Institute, Moscow, Russia, 4-8 March, 2013. [4] Lazarev et al. Izvestia VUZov. 2012, No 6, pp. 9-11 http://miigaik.ru/journal.miigaik.ru/2012/20130129120215-2593.pdf (in Russian). [5] Kokhanov et al. Current problems in remote sensing of the Earth from space. 2013. Vol. 10. No 4. pp. 136-153. http://d33.infospace.ru/d33_conf/sb2013t4/136-153.pdf (in Russian). [6] Oberst et al., 2013 International Colloquium and Workshop "Ganymede Lander: scientific goals and experiments", Space Research Institute, Moscow, Russia, 4-8 March, 2013.

Multimodal imaging of the self-regulating developing brain.

PubMed

Fjell, Anders M; Walhovd, Kristine Beate; Brown, Timothy T; Kuperman, Joshua M; Chung, Yoonho; Hagler, Donald J; Venkatraman, Vijay; Roddey, J Cooper; Erhart, Matthew; McCabe, Connor; Akshoomoff, Natacha; Amaral, David G; Bloss, Cinnamon S; Libiger, Ondrej; Darst, Burcu F; Schork, Nicholas J; Casey, B J; Chang, Linda; Ernst, Thomas M; Gruen, Jeffrey R; Kaufmann, Walter E; Kenet, Tal; Frazier, Jean; Murray, Sarah S; Sowell, Elizabeth R; van Zijl, Peter; Mostofsky, Stewart; Jernigan, Terry L; Dale, Anders M

2012-11-27

Self-regulation refers to the ability to control behavior, cognition, and emotions, and self-regulation failure is related to a range of neuropsychiatric problems. It is poorly understood how structural maturation of the brain brings about the gradual improvement in self-regulation during childhood. In a large-scale multicenter effort, 735 children (4-21 y) underwent structural MRI for quantification of cortical thickness and surface area and diffusion tensor imaging for quantification of the quality of major fiber connections. Brain development was related to a standardized measure of cognitive control (the flanker task from the National Institutes of Health Toolbox), a critical component of self-regulation. Ability to inhibit responses and impose cognitive control increased rapidly during preteen years. Surface area of the anterior cingulate cortex accounted for a significant proportion of the variance in cognitive performance. This finding is intriguing, because characteristics of the anterior cingulum are shown to be related to impulse, attention, and executive problems in neurodevelopmental disorders, indicating a neural foundation for self-regulation abilities along a continuum from normality to pathology. The relationship was strongest in the younger children. Properties of large-fiber connections added to the picture by explaining additional variance in cognitive control. Although cognitive control was related to surface area of the anterior cingulate independently of basic processes of mental speed, the relationship between white matter quality and cognitive control could be fully accounted for by speed. The results underscore the need for integration of different aspects of brain maturation to understand the foundations of cognitive development.

CONFERENCE NOTE: European Optical Society, Topical Meeting Optical Metrology and Nanotechnology, Engelberg, Switzerland, 27 30 March 1994

NASA Astrophysics Data System (ADS)

1993-01-01

This meeting, organized by the Paul Scherrer Institute's Department of Applied Solid State Physics, will be held from 27 30 March 1994 at the Hotel Regina-Titlis, Engelberg, Switzerland. The aim is to bring together scientists from two important fields of current research and increasing industrial relevance. Optical metrology is a traditional discipline of applied optics which reached the nanometre scale a long time ago. Nanotechnology is setting new limits and represents a major challenge to metrology, as well as offering new opportunities to optics. The meeting is intended to help define a common future for optical metrology and nanotechnology. Topics to be covered include: nanometre position control and measuring techniques ultrahigh precision interferometry scanning probe microscopy (AFM, SNOM, etc.) surface modification by scanning probe methods precision surface fabrication and characterization nanolithography micro-optics, diffractive optics components, including systems and applications subwavelength optical structures synthetic optical materials structures and technologies for X-ray optics. For further information please contact: Jens Gobrecht (Secretary), Paul Scherrer Institute, CH-5232 Villigen-PSI, Switzerland.Tel. (41)56992529; Fax (41) 5698 2635.

On the attitude control and flight result of winged reentry test vehicle

NASA Astrophysics Data System (ADS)

Kawaguchi, Jun'ichiro; Inatani, Yoshifumi; Yonemoto, Koichi; Hinada, Motoki

The Institute of Space and Astronautical Science (ISAS) has been studying the unmanned winged space vehicle HIMES (HIghly Maneuverable Engineering Space vehicle) for a decade and successfully carried out sub-sonic Gliding Flight Experiments several years ago, which was followed by Reentry Flight Experiment, utilizing so called 'Rockoon' method, in September of 1988, which failed due to the unexpected burst of the balloon. ISAS conducted it again making use of refined 'Rockoon' scheme in February of 1992. In spite of its small bulk property, it was equipped with not only a reaction control system (RCS) but a surface control system (SCS) capability as well, which enabled it to make a successful flight under both vacuum and atmospheric circumstances. The highest Mach number exceeded 3.5 and the highest altitude was a bit lower to 67 km. Switching from reaction control to surface control was one of the essential engineering interests in the flight like this. Supersonic autonomous flight control with high angle of attack was also what should be established through this, since in general it inevitably carries inherent lateral instability. A flight test this time revealed those features and characteristics quite well. This paper deals with the attitude control strategy with three-axis Motion Simulation Test as well as the flight results.

75 FR 74045 - Guidance on Planning, Implementing, Maintaining, and Enforcing Institutional Controls at...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

..., Implementing, Maintaining, and Enforcing Institutional Controls at Contaminated Sites AGENCY: Environmental... stakeholder input regarding the issues addressed in the EPA interim final guidance, titled Institutional Controls: A Guide to Planning, Implementing, Maintaining, and Enforcing Institutional Controls at...

Institutional Controls: A Guide to Preparing Institutional Control Implementation and Assurance Plans at Contaminated Sites

EPA Pesticide Factsheets

The purpose of this document is to provide guidance to the EPA Regions for developing Institutional Control Implementation and Assurance Plans (ICIAPs) at contaminated sites where the response action includes an institutional controls (ICs) component.

Fabrication and Characterization of a Nanocoax-Based Electrochemical Sensor

NASA Astrophysics Data System (ADS)

Rizal, Binod; Archibald, Michelle M.; Naughton, Jeffrey R.; Connolly, Timothy; Shepard, Stephen C.; Burns, Michael J.; Chiles, Thomas C.; Naughton, Michael J.

2014-03-01

We used an imprint lithography process to fabricate three dimensional electrochemical sensors comprising arrays of vertically-oriented coaxial electrodes, with the coax cores and shields serving as working and counter electrodes, respectively, and with nanoscale separation gaps.[2] Arrays of devices with different electrode gaps (coax annuli) were prepared, yielding increasing sensitivity with decreasing annulus thickness. A coax-based sensor with a 100 nm annulus was found to have sensitivity 100 times greater than that of a conventional planar sensor control, which had millimeter-scale electrode gap spacing. We suggest that this enhancement is due to an increase in the diffusion of molecules between electrodes, which improves the current per unit surface area compared to the planar device. Supported by NIH (National Cancer Institute and the National Institute of Allergy and Infectious Diseases).

Solid State Surfaces and Interfaces VIII

NASA Astrophysics Data System (ADS)

Pincik, Emil

2014-09-01

The conference SSSI VIII (November 25-28, 2013) was the 8th continuation of the series of the Solid State Surfaces and Interfaces conferences taking place usually in the Smolenice castle in the western part of the Slovak Republic. The event was organized by the following institutions of Slovak Republic: Institute of Physics of SAS Bratislava, Institute of Aurel Stodola of University of Žilina, and Faculty of Mathematics, Physics and Informatics of Comenius University Bratislava. More than 150 scientists of the three continents (Europe, Asia and Africa) participated on the event with almost 100 poster presentations. The representatives of all organizing institutions consider this event as very important for Middle Europe region.

Best practices in disinfection of noncritical surfaces in the health care setting: creating a bundle for success.

PubMed

Havill, Nancy L

2013-05-01

Because increasing evidence suggests that the environment plays a role in transmission of health care-associated infections, more attention is focusing on environmental cleaning and improving its efficacy. Creating and sustaining a successful cleaning and disinfection program should include several key components using a bundle approach and requires ongoing commitment within the institution. Copyright © 2013 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

[Research on competency building standards of institutions of schistosomiasis prevention and control in Hubei Province I Investigation of institution management].

PubMed

Liu, Han-cheng; Zhong, Chen-hui; Liao, Si-qi; He, Hui

2014-08-01

To investigate the current situation of management of institutions of schistosomiasis prevention and control in Hubei Province, so as to explore the probable competency building standards for these institutions at the county and township levels. By using a combination of quantitative and qualitative methods, the institutions of schistosomiasis prevention and control at county and township levels were investigated for the institutional setup, staffing and fulfillment functions since the reform of 2004. Among 63 schistosomiasis endemic counties (cities, districts) of Hubei Province, there were 26 independent schistosomiasis control institutions (41.27%), there were 24 institutions which were incorporated into CDC (38.10%), and there were no institutions in 13 counties (20.63%). Among 518 endemic towns, there were 299 institutions (57.72%). The total staffing size were 1 932, but there were 1 586 (82.09%) people actually working in the post, and therefore there were 346 (17.91%) empty positions. The average rates of carrying out the six functions were 91.48%-71.19%, but only 19.23% of the institutions participated in the comprehensive schistosomiasis control management project and its effect assessment. According to the management model for schistosomiasis control institutions under the current institutional mechanisms, we need a rigorous industry standard to constrain, guide and standardize the management and capacity-building of the institutions in different historical periods.

An outbreak of vancomycin-resistant Enterococcus faecium in an acute care pediatric hospital: Lessons from environmental screening and a case-control study

PubMed Central

Drews, Steven J; Richardson, Susan E; Wray, Rick; Freeman, Renee; Goldman, Carol; Streitenberger, Laurie; Stevens, Derek; Goia, Cristina; Kovach, Danuta; Brophy, Jason; Matlow, Anne G

2008-01-01

BACKGROUND The present study describes a vancomycin-resistant enterococci (VRE) outbreak investigation and a case-control study to identify risk factors for VRE acquisition in a tertiary care pediatric hospital. OBJECTIVE To report an outbreak investigation and a case-control study to identify risk factors for VRE colonization or infection in hospitalized children. METHODS Screening for VRE cases was performed by culture or polymerase chain reaction. A case-control study of VRE-colonized patients was undertaken. Environmental screening was performed using standard culture and susceptibility methods, with pulsed-field gel electrophoresis to determine relationships between VRE isolates. Statistical analysis was performed using SAS version 9.0 (SAS Institute Inc, USA). RESULTS Thirty-four VRE-positive cases were identified on 10 wards between February 28, 2005, and May 27, 2005. Pulsed-field gel electrophoresis analysis confirmed a single outbreak strain that was also isolated from a video game found on one affected ward. Multivariate analysis identified cephalosporin use as the major risk factor for VRE colonization. CONCLUSIONS In the present study outbreak, VRE colonization was significantly associated with cephalosporin use. Because shared recreational items and environmental surfaces may be colonized by VRE, they warrant particular attention in housekeeping protocols, particularly in pediatric institutions. PMID:19412380

76 FR 62149 - American Chemistry Council, The Chlorine Institute, Inc., the Fertilizer Institute, and PPG...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. NOR 42129; Docket No. FD 35517] American Chemistry Council, The Chlorine Institute, Inc., the Fertilizer Institute, and PPG... both cases. \\1\\ In Docket No. NOR 42129, the complainants are American Chemistry Council, The Chlorine...

Liquid spreading on ceramic-coated carbon nanotube films and patterned microstructures

NASA Astrophysics Data System (ADS)

Zhao, Hangbo; Hart, A. John

2015-11-01

We study the capillary-driven liquid spreading behavior on films and microstructures of ceramic-coated vertically aligned carbon nanotubes (CNTs) fabricated on quartz substrates. The nanoscale porosity and micro-scale dimensions of the CNT structures, which can be precisely varied by the fabrication process, enable quantitative measurements that can be related to analytical models of the spreading behavior. Moreover, the conformal alumina coating by atomic layer deposition (ALD) prevents capillary-induced deformation of the CNTs upon meniscus recession, which has complicated previous studies of this topic. Washburn-like liquid spreading behavior is observed on non-patterned CNT surfaces, and is explained using a scaling model based on the balance of capillary driving force and the viscous drag force. Using these insights, we design patterned surfaces with controllable spreading rates and study the contact line pinning-depinning behavior. The nanoscale porosity, controllable surface chemistry, and mechanical stability of coated CNTs provide significantly enhanced liquid-solid interfacial area compared to solid microstructures. As a result, these surface designs may be useful for applications such as phase-change heat transfer and electrochemical energy storage. Funding for this project is provided by the National Institutes of Health and the MIT Center for Clean Water and Clean Energy supported by the King Fahd University of Petroleum and Minerals.

Optimization of Airport Surface Traffic: A Case-Study of Incheon International Airport

NASA Technical Reports Server (NTRS)

Eun, Yeonju; Jeon, Daekeun; Lee, Hanbong; Jung, Yoon C.; Zhu, Zhifan; Jeong, Myeongsook; Kim, Hyounkong; Oh, Eunmi; Hong, Sungkwon

2017-01-01

This study aims to develop a controllers decision support tool for departure and surface management of ICN. Airport surface traffic optimization for Incheon International Airport (ICN) in South Korea was studied based on the operational characteristics of ICN and airspace of Korea. For surface traffic optimization, a multiple runway scheduling problem and a taxi scheduling problem were formulated into two Mixed Integer Linear Programming (MILP) optimization models. The Miles-In-Trail (MIT) separation constraint at the departure fix shared by the departure flights from multiple runways and the runway crossing constraints due to the taxi route configuration specific to ICN were incorporated into the runway scheduling and taxiway scheduling problems, respectively. Since the MILP-based optimization model for the multiple runway scheduling problem may be computationally intensive, computation times and delay costs of different solving methods were compared for a practical implementation. This research was a collaboration between Korea Aerospace Research Institute (KARI) and National Aeronautics and Space Administration (NASA).

Optimization of Airport Surface Traffic: A Case-Study of Incheon International Airport

NASA Technical Reports Server (NTRS)

Eun, Yeonju; Jeon, Daekeun; Lee, Hanbong; Jung, Yoon Chul; Zhu, Zhifan; Jeong, Myeong-Sook; Kim, Hyoun Kyoung; Oh, Eunmi; Hong, Sungkwon

2017-01-01

This study aims to develop a controllers' decision support tool for departure and surface management of ICN. Airport surface traffic optimization for Incheon International Airport (ICN) in South Korea was studied based on the operational characteristics of ICN and airspace of Korea. For surface traffic optimization, a multiple runway scheduling problem and a taxi scheduling problem were formulated into two Mixed Integer Linear Programming (MILP) optimization models. The Miles-In-Trail (MIT) separation constraint at the departure fix shared by the departure flights from multiple runways and the runway crossing constraints due to the taxi route configuration specific to ICN were incorporated into the runway scheduling and taxiway scheduling problems, respectively. Since the MILP-based optimization model for the multiple runway scheduling problem may be computationally intensive, computation times and delay costs of different solving methods were compared for a practical implementation. This research was a collaboration between Korea Aerospace Research Institute (KARI) and National Aeronautics and Space Administration (NASA).

Succession in a microbial mat community: A gaian perspective

NASA Astrophysics Data System (ADS)

Stolz, J. F.

The Gaia hypothesis originally proposed by James E. Lovelock states that the composition, oxidation-reduction state and temperature of the troposphere are actively regulated by the activities of the biota. The gaian concept has been extrapolated to include the composition of surface sediments through the process of biomineralization. The stratified microbial community dominated by the cyanobacterium Microcoleus chthonoplastes is actively involved in the deposition of laminated sediments at Laguna Figueroa, Baja California, Mexico. Unusually heavy rains in the winters of 1979 and 1980 flooded the evaporite flat with up to 3 meters of meteoric water and deposited 5 - 10 cm of allocthonous sediment. The composition of the microbial community changed as a succession of dominating microbial species ensued, ultimately leading to the recolonization of the surface sediment by the original Microcoleus-dominated community. The resiliency of bacterial communities is suggested to be an important mechanism of gaian control systems. Present address: Control and Energy Conversion Division, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109, U.S.A.

TALARIS project update: Overview of flight testing and development of a prototype planetary surface exploration hopper

NASA Astrophysics Data System (ADS)

Rossi, Christopher; Cunio, Phillip M.; Alibay, Farah; Morrow, Joe; Nothnagel, Sarah L.; Steiner, Ted; Han, Christopher J.; Lanford, Ephraim; Hoffman, Jeffrey A.

2012-12-01

The TALARIS (Terrestrial Artificial Lunar And Reduced GravIty Simulator) project is intended to test GNC (Guidance, Navigation, and Control) algorithms on a prototype planetary surface exploration hopper in a dynamic environment with simulated reduced gravity. The vehicle is being developed by the Charles Stark Draper Laboratory and Massachusetts Institute of Technology in support of efforts in the Google Lunar X-Prize contest. This paper presents progress achieved since September 2010 in vehicle development and flight testing. Upgrades to the vehicle are described, including a redesign of the power train for the gravity-offset propulsion system and a redesign of key elements of the spacecraft emulator propulsion system. The integration of flight algorithms into modular flight software is also discussed. Results are reported for restricted degree of freedom (DOF) tests used to tune GNC algorithms on the path to a full 6-DOF hover-hop flight profile. These tests include 3-DOF tests on flat surfaces restricted to horizontal motion, and 2-DOF vertical tests restricted to vertical motion and 1-DOF attitude control. The results of tests leading up to full flight operations are described, as are lessons learned and future test plans.

Formalization, implementation, and modeling of institutional controllers for distributed robotic systems.

PubMed

Pereira, José N; Silva, Porfírio; Lima, Pedro U; Martinoli, Alcherio

2014-01-01

The work described is part of a long term program of introducing institutional robotics, a novel framework for the coordination of robot teams that stems from institutional economics concepts. Under the framework, institutions are cumulative sets of persistent artificial modifications made to the environment or to the internal mechanisms of a subset of agents, thought to be functional for the collective order. In this article we introduce a formal model of institutional controllers based on Petri nets. We define executable Petri nets-an extension of Petri nets that takes into account robot actions and sensing-to design, program, and execute institutional controllers. We use a generalized stochastic Petri net view of the robot team controlled by the institutional controllers to model and analyze the stochastic performance of the resulting distributed robotic system. The ability of our formalism to replicate results obtained using other approaches is assessed through realistic simulations of up to 40 e-puck robots. In particular, we model a robot swarm and its institutional controller with the goal of maintaining wireless connectivity, and successfully compare our model predictions and simulation results with previously reported results, obtained by using finite state automaton models and controllers.

75 FR 78883 - Implementation of Additional Changes From the Annual Review of the Entity List

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... are placed on the Entity List on the basis of certain sections of part 744 (Control Policy: End-User...; --Institute of Control Devices (BICD); --*Beijing Institute of Aerospace Control Devices (BIACD); --*Beijing Aerospace Control Instruments Institute; and --*Design and Manufacture Center of Navigation and Control...

The telesupervised adaptive ocean sensor fleet

NASA Astrophysics Data System (ADS)

Elfes, Alberto; Podnar, Gregg W.; Dolan, John M.; Stancliff, Stephen; Lin, Ellie; Hosler, Jeffrey C.; Ames, Troy J.; Moisan, John; Moisan, Tiffany A.; Higinbotham, John; Kulczycki, Eric A.

2007-09-01

We are developing a multi-robot science exploration architecture and system called the Telesupervised Adaptive Ocean Sensor Fleet (TAOSF). TAOSF uses a group of robotic boats (the OASIS platforms) to enable in-situ study of ocean surface and sub-surface phenomena. The OASIS boats are extended-deployment autonomous ocean surface vehicles, whose development is funded separately by the National Oceanic and Atmospheric Administration (NOAA). The TAOSF architecture provides an integrated approach to multi-vehicle coordination and sliding human-vehicle autonomy. It allows multiple mobile sensing assets to function in a cooperative fashion, and the operating mode of the vessels to range from autonomous control to teleoperated control. In this manner, TAOSF increases data-gathering effectiveness and science return while reducing demands on scientists for tasking, control, and monitoring. It combines and extends prior related work done by the authors and their institutions. The TAOSF architecture is applicable to other areas where multiple sensing assets are needed, including ecological forecasting, water management, carbon management, disaster management, coastal management, homeland security, and planetary exploration. The first field application chosen for TAOSF is the characterization of Harmful Algal Blooms (HABs). Several components of the TAOSF system have been tested, including the OASIS boats, the communications and control interfaces between the various hardware and software subsystems, and an airborne sensor validation system. Field tests in support of future HAB characterization were performed under controlled conditions, using rhodamine dye as a HAB simulant that was dispersed in a pond. In this paper, we describe the overall TAOSF architecture and its components, discuss the initial tests conducted and outline the next steps.

15 CFR Supplement No. 4 to Part 744 - Entity List

Code of Federal Regulations, 2012 CFR

2012-01-01

...) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE EXPORT ADMINISTRATION REGULATIONS CONTROL POLICY... Beijing; —Institute of Control Devices (BICD); —Beijing Institute of Aerospace Control Devices (BIACD); —Beijing Aerospace Control Instruments Institute; and —Design and Manufacture Center of Navigation and...

Operational Characteristics Identification and Simulation Model Verification for Incheon International Airport

NASA Technical Reports Server (NTRS)

Eun, Yeonju; Jeon, Daekeun; Lee, Hanbong; Zhu, Zhifan; Jung, Yoon C.; Jeong, Myeongsook; Kim, Hyounkyong; Oh, Eunmi; Hong, Sungkwon; Lee, Junwon

2016-01-01

Incheon International Airport (ICN) is one of the hub airports in East Asia. Airport operations at ICN have been growing more than 5% per year in the past five years. According to the current airport expansion plan, a new passenger terminal will be added and the current cargo ramp will be expanded in 2018. This expansion project will bring 77 new stands without adding a new runway to the airport. Due to such continuous growth in airport operations and future expansion of the ramps, it will be highly likely that airport surface traffic will experience more congestion, and therefore, suffer from efficiency degradation. There is a growing awareness in aviation research community of need for strategic and tactical surface scheduling capabilities for efficient airport surface operations. Specific to ICN airport operations, a need for A-CDM (Airport - Collaborative Decision Making) or S-CDM(Surface - Collaborative Decision Making), and controller decision support tools for efficient air traffic management has arisen since several years ago. In the United States, there has been independent research efforts made by academia, industry, and government research organizations to enhance efficiency and predictability of surface operations at busy airports. Among these research activities, the Spot and Runway Departure Advisor (SARDA) developed and tested by National Aeronautics and Space Administration (NASA) is a decision support tool to provide tactical advisories to the controllers for efficient surface operations. The effectiveness of SARDA concept, was successfully verified through the human-in-the-loop (HITL) simulations for both spot release and runway operations advisories for ATC Tower controllers of Dallas/Fort Worth International Airport (DFW) in 2010 and 2012, and gate pushback advisories for the ramp controller of Charlotte/Douglas International Airport (CLT) in 2014. The SARDA concept for tactical surface scheduling is further enhanced and is being integrated into NASA's Airspace Technology Demonstration - 2 (ATD-2) project for technology demonstration of Integrated Arrival/Departure/Surface (ADS) operations at CLT. This study is a part of the international research collaboration between KAIA (Korea Agency for Infrastructure Technology Advancement)/KARI (Korea Aerospace Research Institute) and NASA, which is being conducted to validate the effectiveness of SARDA concept as a controller decision support tool for departure and surface management of ICN. This paper presents the preliminary results of the collaboration effort. It includes investigation of the operational environment of ICN, data analysis for identification of the operational characteristics of the airport, construction and verification of airport simulation model using Surface Operations Simulator and Scheduler (SOSS), NASA's fast-time simulation tool.

Operational Characteristics Identification and Simulation Model Verification for Incheon International Airport

NASA Technical Reports Server (NTRS)

Eun, Yeonju; Jeon, Daekeun; Lee, Hanbong; Zhu, Zhifan; Jung, Yoon C.; Jeong, Myeongsook; Kim, Hyounkyong; Oh, Eunmi; Hong, Sungkwon; Lee, Junwon

2016-01-01

Incheon International Airport (ICN) is one of the hub airports in East Asia. Airport operations at ICN have been growing more than 5 percent per year in the past five years. According to the current airport expansion plan, a new passenger terminal will be added and the current cargo ramp will be expanded in 2018. This expansion project will bring 77 new stands without adding a new runway to the airport. Due to such continuous growth in airport operations and future expansion of the ramps, it will be highly likely that airport surface traffic will experience more congestion, and therefore, suffer from efficiency degradation. There is a growing awareness in aviation research community of need for strategic and tactical surface scheduling capabilities for efficient airport surface operations. Specific to ICN airport operations, a need for A-CDM (Airport - Collaborative Decision Making) or S-CDM (Surface - Collaborative Decision Making), and controller decision support tools for efficient air traffic management has arisen since several years ago. In the United States, there has been independent research efforts made by academia, industry, and government research organizations to enhance efficiency and predictability of surface operations at busy airports. Among these research activities, the Spot and Runway Departure Advisor (SARDA) developed and tested by National Aeronautics and Space Administration (NASA) is a decision support tool to provide tactical advisories to the controllers for efficient surface operations. The effectiveness of SARDA concept, was successfully verified through the human-in-the-loop (HITL) simulations for both spot release and runway operations advisories for ATC Tower controllers of Dallas-Fort Worth International Airport (DFW) in 2010 and 2012, and gate pushback advisories for the ramp controller of Charlotte-Douglas International Airport (CLT) in 2014. The SARDA concept for tactical surface scheduling is further enhanced and is being integrated into NASA's Airspace Technology Demonstration-2 (ATD-2) project for technology demonstration of Integrated Arrival-Departure-Surface (IADS) operations at CLT. This study is a part of the international research collaboration between KAIA (Korea Agency for Infrastructure Technology Advancement), KARI (Korea Aerospace Research Institute) and NASA, which is being conducted to validate the effectiveness of SARDA concept as a controller decision support tool for departure and surface management of ICN. This paper presents the preliminary results of the collaboration effort. It includes investigation of the operational environment of ICN, data analysis for identification of the operational characteristics of the airport, construction and verification of airport simulation model using Surface Operations Simulator and Scheduler (SOSS), NASA's fast-time simulation tool.

Budgetary Control Procedures for Institutions.

ERIC Educational Resources Information Center

Powell, Ray M.

Budgetary control procedures for not-for-profit institutions are presented in this compilation of budgetary materials and ideas gathered at the Program for Institutional Administrators at the University of Notre Dame. Budgetary reporting and control are suggested as the most effective tools for coordinating and controlling the acquisition and use…

Navigating institutional complexity in the health sector: lessons from tobacco control in Kenya

PubMed Central

Lencucha, Raphael; Magati, Peter; Drope, Jeffrey

2016-01-01

Introduction This research examines the institutional dynamics of tobacco control following the establishment of Kenya’s 2007 landmark tobacco control legislation. Our analysis focuses specifically on coordination challenges within the health sector. Methods We conducted semi-structured interviews with key informants (n = 17) involved in tobacco regulation and control in Kenya. We recruited participants from different offices and sectors of government and non-governmental organizations. Results We find that the main challenges toward successful implementation of tobacco control are a lack of coordination and clarity of mandate of the principal institutions involved in tobacco control efforts. In a related development, the passage of a new constitution in 2010 created structural changes that have affected the successful implementation of the country’s tobacco control legislation. Discussion We discuss how proponents of tobacco control navigated these two overarching institutional challenges. These findings point to the institutional factors that influence policy implementation extending beyond the traditional focus on the dynamic between government and the tobacco industry. These findings specifically point to the intragovernmental challenges that bear on policy implementation. The findings suggest that for effective implementation of tobacco control legislation and regulation, there is need for increased cooperation among institutions charged with tobacco control, particularly within or involving the Ministry of Health. Decisive leadership was also widely presented as a component of successful institutional reform. Conclusion This study points to the importance of coordinating policy development and implementation across levels of government and the need for leadership and clear mandates to guide cooperation within the health sector. The Kenyan experience offers useful lessons in the pitfalls of institutional incoherence, but more importantly, the value of investing in and then promoting well-functioning institutions. PMID:27418654

Considering Institutional Character and Leadership Domains in K-12 Principal Training, Licensing, and Selection

ERIC Educational Resources Information Center

Painter, Suzanne R.

2006-01-01

Selection of educational leaders in the United States typically involves four decision points controlled by three types of institutions: admission to and graduation from a principal preparation program controlled by an institution of higher education, certification controlled by the state, and employment controlled by a local school district.…

[Current situation of scientific research capacity of schistosomiasis control institutions of municipal cities in Hubei Province].

PubMed

Ying, Zhao-yu; Tan, Xiao-dong; Huang, Ya-dong; Jiang, Bao-jie

2014-08-01

To evaluate the levels of the Chinese literature published by the schistosomiasis control institutions of 17 municipal cities of Hubei Province. The related literature published from 2008 to 2012 was searched from the databases of CNKI, VIP and Wanfang and then screened by the exclusion criteria. NoteExpress and Excel softwares were applied to collect the literature and carry out the bibliometric analysis. A total of 168 papers were included and the schistosomiasis control institutes of Jingzhou City and Wuhan City had the highest amount. The literature was mainly published in Chinese Journal of Schistosomiasis Control and Journal of Public Health and Preventive Medicine. The comprehensive influence indexes of the schistosomiasis control institutes of Jingzhou, Wuhan and Qianjiang cities were higher. The schistosomiasis control institutes of Jingzhou City had an extensive content of literature while Wuhan was mainly focused on epidemiology, case report and Oncomelania hupensis snail control. The research of schistosomiasis in each municipal city has an extensive content and the research capacity of the schistosomiasis control institute of Jingzhou City is relatively outstanding.

Close-range photogrammetry in underground mining ground control

NASA Astrophysics Data System (ADS)

Benton, Donovan J.; Chambers, Amy J.; Raffaldi, Michael J.; Finley, Seth A.; Powers, Mark J.

2016-09-01

Monitoring underground mine deformation and support conditions has traditionally involved visual inspection and geotechnical instrumentation. Monitoring displacements with conventional instrumentation can be expensive and time-consuming, and the number of locations that can be effectively monitored is generally limited. Moreover, conventional methods typically produce vector rather than tensor descriptions of geometry changes. Tensor descriptions can provide greater insight into hazardous ground movements, particularly in recently excavated openings and in older workings that have been negatively impacted by high stress concentrations, time-dependent deformation, or corrosion of ground support elements. To address these issues, researchers with the National Institute for Occupational Safety and Health, Spokane Mining Research Division are developing and evaluating photogrammetric systems for ground control monitoring applications in underground mines. This research has demonstrated that photogrammetric systems can produce millimeter-level measurements that are comparable to conventional displacement-measuring instruments. This paper provides an overview of the beneficial use of close-range photogrammetry for the following three ground control applications in underground mines: monitoring the deformation of surface support, monitoring rock mass movement, and monitoring the corrosion of surface support. Preliminary field analyses, case studies, limitations, and best practices for these applications are also discussed.

Aeroelastic Control of a Segmented Trailing Edge Using Fiber Optic Strain Sensing Technology

NASA Technical Reports Server (NTRS)

Graham, Corbin Jay; Martins, Benjamin; Suppanade, Nathan

2014-01-01

Currently, design of aircraft structures incorporate a safety factor which is essentially an over design to mitigate the risk of structure failure during operation. Typically this safety factor is to design the structure to withstand loads much greater than what is expected to be experienced during flight. NASA Dryden Flight Research Centers has developed a Fiber Optic Strain Sensing (FOSS) system which can measure strain values in real-time. The Aeroelastics Lab at the AERO Institute is developing a segmented trailing edged wing with multiple control surfaces that can utilize the data from the FOSS system, in conjunction with an adaptive controller to redistribute the lift across a wing. This redistribution can decrease the amount of strain experienced by the wing as well as be used to dampen vibration and reduce flutter.

Workshop on Mercury: Space Environment, Surface, and Interior

NASA Technical Reports Server (NTRS)

2001-01-01

This volume contains abstracts that have been accepted for presentation at the Workshop on Mercury: Space Environment, Surface, and Interior, October 4-5, 2001. The Scientific Organizing Committee consisted of Mark Robinson (Northwestern University), Marty Slade (Jet Propulsion Laboratory), Jim Slavin (NASA Goddard Space Flight Center), Sean Solomon (Carnegie Institution), Ann Sprague (University of Arizona), Paul Spudis (Lunar and Planetary Institute), G. Jeffrey Taylor (University of Hawai'i), Faith Vilas (NASA Johnson Space Center), Meenakshi Wadhwa (The Field Museum), and Thomas Watters (National Air and Space Museum). Logistics, administrative, and publications support were provided by the Publications and Program Services Departments of the Lunar and Planetary Institute.

Novel safety floors do not influence early compensatory balance reactions in older adults.

PubMed

Wright, Alexander D; Heckman, George A; McIlroy, William E; Laing, Andrew C

2014-01-01

Novel safety flooring systems are a promising approach for reducing fall-related injuries in seniors, as they have been demonstrated to substantially reduce impact severity during falls, while minimally impairing balance control in community-dwelling older women. This pilot study aimed to characterize the potential effects of flooring conditions on dynamic balance control in retirement home-dwellers with more limited mobility. A tether-release paradigm was used to simulate a trip-type perturbation in 15 seniors across five flooring surfaces (three novel safety floors and one carpet compared to institutional-grade resilient rolled-sheeting). Kinetic and kinematic data tracked the displacement profiles of the underfoot centre-of-pressure and whole-body centre-of-mass, which were used to characterize compensatory balance reactions. Difference tests (ANOVA) found that the onset of the compensatory balance reaction was not associated with floor condition, nor were the timing and magnitude of peak centre-of-pressure excursion (minimum margin of safety) and velocity. Accordingly, the minimum margin of safety of the centre-of-mass was not significantly different across floors. Equivalence tests supported these findings. This study provides evidence that the carpet and novel safety floors tested do not negatively influence characteristics of initial dynamic balance responses following a lean-and-release perturbation compared to an institutional-grade resilient rolled-sheeting surface. In combination with reports of substantial force attenuative properties during fall-related impacts, these findings support the promise of novel safety floors as a biomechanically effective strategy for reducing fall-related injuries. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

Efficacy evaluation of an anti-caries varnish: protocol for a phase II randomised controlled trial

PubMed Central

Tut, Ohnmar; Rothen, Marilynn; Mancl, Lloyd; Gallen, Marcelle; Tanzer, Jason M

2017-01-01

Introduction Dental caries (tooth decay) is a common disease in which the products of sugar metabolism by certain bacteria that populate the tooth surface induce the development and progression of lesions (cavities). This is a phase II single-centre randomised, double-blind, active-controlled, parallel-group trial to assess the efficacy of a combination povidone iodine and sodium fluoride dental varnish to determine if it is superior to a varnish containing only sodium fluoride in the prevention of new caries lesions. The objective of this report is to describe the rationale and protocol for the trial. Methods and analysis The study site is Pohnpei State, Federated States of Micronesia. The study population is 284 children 48–84 months old. The primary outcome will be the surface-level primary molar caries increment (d2-3mfs/DMFS) at 2 years post baseline. The incremental dental caries at 1 year will also be compared between the two interventions. The secondary outcome is the Facial Image Scale after the initial treatment and after the fifth treatment at 1 year that gauges the child’s response to the treatment. Ethics and dissemination The Western Institutional Review Board (designated IRB) and the Institutional Review Board of the College of Micronesia-FSM approved all study procedures. The US Food and Drug Administration (FDA) has issued IND 128835 covering this study. The study results will be published and submitted to the FDA in support of a new drug application. Trialregistration number NCT03082196. PMID:28667230

The Effects of Fire on the Function of the 200-BP-1 Engineered Surface Barrier

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ward, Anderson L.; Link, Steven O.; Hasan, Nazmul

2009-09-01

A critical unknown in use of barrier technology for long-term waste isolation is performance after a major disturbance especially when institutional controls are intact, but there are no resources to implement corrective actions. The objective of this study was to quantify the effects of wild fire on alterations the function of an engineered barrier. A controlled burn September 26, 2008 was used to remove all the vegetation from the north side of the barrier. Flame heights exceeded 9 m and temperatures ranged from 250 oC at 1.5 cm below the surface to over 700 oC at 1 m above themore » surface. Post-fire analysis of soil properties show significant decreases in wettability, hydraulic conductivity, air entry pressure, organic matter, and porosity relative to pre-fire conditions whereas dry bulk density increased. Decreases in hydraulic conductivity and wettabilty immediately after the fire are implicated in a surface runoff event that occurred in January 2009, the first in 13 years. There was a significant increase in macro-nutrients, pH, and electrical conductivity. After one year, hydrophobicity has returned to pre-burn levels with only 16% of samples still showing signs of decreased wettability. Over the same period, hydraulic conductivity and air entry pressure returned to pre-burn levels at one third of the locations but remained identical to values recorded immediately after the fire at the other two thirds. Soil nutrients, pH, and electrical conductivity remain elevated after 1 year. Species composition on the burned surface changed markedly from prior years and relative to the unburned surface and two analog sites. An increase in the proportion of annuals and biennials is characteristic of burned surfaces that have become dominated by ruderal species. Greenhouse seedling emergence tests conducted to assess the seed bank of pre- and post-burn soils and of two analog sites at the McGee Ranch show no difference in the number of species emerging from soils collected before and after the fire. However, there were fewer species emerging from the seed bank on the side slopes and more species emerging from two analog sites. Leaf area index measures confirmed the substantial differences in plant communities after fire. Xylem pressure potential were considerably higher on the burned half of the barrier in September 2009 suggesting that not all the water in the soil profile will be removed before the fall rains begin. The results of this study are expected to contribute to a better understanding of barrier performance after major disturbances in a post-institutional control environment. Such an understanding is needed to enhance stakeholder acceptance regarding the long-term efficacy of engineered barriers. This study will also support improvements in the design of evapotranspiration (ET) and hybrid (ET + capacitive) barriers and the performance monitoring systems.« less

12 CFR 308.157 - Relevant considerations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... depository institution to supervise and control the activities of the applicant; (7) The level of ownership... or continue as an institution-affiliated party with respect to an insured depository institution; to own or control directly or indirectly an insured depository institution; or to participate directly or...

10 CFR 61.63 - Financial assurances for institutional controls.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Financial assurances for institutional controls. 61.63 Section 61.63 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Financial Assurances § 61.63 Financial assurances for institutional controls. (a) Prior to...

10 CFR 61.63 - Financial assurances for institutional controls.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Financial assurances for institutional controls. 61.63 Section 61.63 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Financial Assurances § 61.63 Financial assurances for institutional controls. (a) Prior to...

10 CFR 61.63 - Financial assurances for institutional controls.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Financial assurances for institutional controls. 61.63 Section 61.63 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Financial Assurances § 61.63 Financial assurances for institutional controls. (a) Prior to...

10 CFR 61.63 - Financial assurances for institutional controls.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Financial assurances for institutional controls. 61.63 Section 61.63 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Financial Assurances § 61.63 Financial assurances for institutional controls. (a) Prior to...

10 CFR 61.63 - Financial assurances for institutional controls.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Financial assurances for institutional controls. 61.63 Section 61.63 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Financial Assurances § 61.63 Financial assurances for institutional controls. (a) Prior to...

SSERVI Analog Regolith Simulant Testbed Facility

NASA Astrophysics Data System (ADS)

Minafra, Joseph; Schmidt, Gregory; Bailey, Brad; Gibbs, Kristina

2016-10-01

The Solar System Exploration Research Virtual Institute (SSERVI) at NASA's Ames Research Center in California's Silicon Valley was founded in 2013 to act as a virtual institute that provides interdisciplinary research centered on the goals of its supporting directorates: NASA Science Mission Directorate (SMD) and the Human Exploration & Operations Mission Directorate (HEOMD).Primary research goals of the Institute revolve around the integration of science and exploration to gain knowledge required for the future of human space exploration beyond low Earth orbit. SSERVI intends to leverage existing JSC1A regolith simulant resources into the creation of a regolith simulant testbed facility. The purpose of this testbed concept is to provide the planetary exploration community with a readily available capability to test hardware and conduct research in a large simulant environment.SSERVI's goals include supporting planetary researchers within NASA, other government agencies; private sector and hardware developers; competitors in focused prize design competitions; and academic sector researchers.SSERVI provides opportunities for research scientists and engineers to study the effects of regolith analog testbed research in the planetary exploration field. This capability is essential to help to understand the basic effects of continued long-term exposure to a simulated analog test environment.The current facility houses approximately eight tons of JSC-1A lunar regolith simulant in a test bin consisting of a 4 meter by 4 meter area, including dust mitigation and safety oversight.Facility hardware and environment testing scenarios could include, Lunar surface mobility, Dust exposure and mitigation, Regolith handling and excavation, Solar-like illumination, Lunar surface compaction profile, Lofted dust, Mechanical properties of lunar regolith, Surface features (i.e. grades and rocks)Numerous benefits vary from easy access to a controlled analog regolith simulant testbed, and planetary exploration activities at NASA Research Park, to academia and expanded commercial opportunities, as well as public outreach and education opportunities.

Vocational Home Economics Curriculum Guide for Occupational Home and Institutional Services.

ERIC Educational Resources Information Center

Dewald, Margaret R.

The training program outlined in this guide focuses upon the development of students for gainful employment through a two-year course of study in home and institutional services. Instructional topics are provided in nine areas: orientation to home and institutional services, cleaning supplies and equipment, cleaning surfaces, cleaning clothes and…

Plasma Electrolytic Oxidation of Titanium Implant Surfaces: Microgroove-Structures Improve Cellular Adhesion and Viability.

PubMed

Hartjen, Philip; Hoffmann, Alexia; Henningsen, Anders; Barbeck, Mike; Kopp, Alexander; Kluwe, Lan; Precht, Clarissa; Quatela, Olivia; Gaudin, Robert; Heiland, Max; Friedrich, Reinhard E; Knipfer, Christian; Grubeanu, Daniel; Smeets, Ralf; Jung, Ole

2018-01-01

Plasma electrolytic oxidation (PEO) is an established electrochemical treatment technique that can be used for surface modifications of metal implants. In this study we to treated titanium implants with PEO, to examine the resulting microstructure and to characterize adhesion and viability of cells on the treated surfaces. Our aim was to identify an optimal surface-modification for titanium implants in order to improve soft-tissue integration. Three surface-variants were generated on titanium alloy Ti6Al4V by PEO-treatment. The elemental composition and the microstructures of the surfaces were characterized using energy dispersive X-ray spectroscopy, scanning electron microscopy and profilometry. In vitro cytocompatibility of the surfaces was assessed by seeding L929 fibroblasts onto them and measuring the adhesion, viability and cytotoxicity of cells by means of live/dead staining, XTT assay and LDH assay. Electron microscopy and profilometry revealed that the PEO-surface variants differed largely in microstructure/topography, porosity and roughness from the untreated control material as well as from one another. Roughness was generally increased after PEO-treatment. In vitro, PEO-treatment led to improved cellular adhesion and viability of cells accompanied by decreased cytotoxicity. PEO-treatment provides a promising strategy to improve the integration of titanium implants with surrounding tissues. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Navigating institutional complexity in the health sector: lessons from tobacco control in Kenya.

PubMed

Lencucha, Raphael; Magati, Peter; Drope, Jeffrey

2016-12-01

 This research examines the institutional dynamics of tobacco control following the establishment of Kenya's 2007 landmark tobacco control legislation. Our analysis focuses specifically on coordination challenges within the health sector.  We conducted semi-structured interviews with key informants (n = 17) involved in tobacco regulation and control in Kenya. We recruited participants from different offices and sectors of government and non-governmental organizations.  We find that the main challenges toward successful implementation of tobacco control are a lack of coordination and clarity of mandate of the principal institutions involved in tobacco control efforts. In a related development, the passage of a new constitution in 2010 created structural changes that have affected the successful implementation of the country's tobacco control legislation.  We discuss how proponents of tobacco control navigated these two overarching institutional challenges. These findings point to the institutional factors that influence policy implementation extending beyond the traditional focus on the dynamic between government and the tobacco industry. These findings specifically point to the intragovernmental challenges that bear on policy implementation. The findings suggest that for effective implementation of tobacco control legislation and regulation, there is need for increased cooperation among institutions charged with tobacco control, particularly within or involving the Ministry of Health. Decisive leadership was also widely presented as a component of successful institutional reform.  This study points to the importance of coordinating policy development and implementation across levels of government and the need for leadership and clear mandates to guide cooperation within the health sector. The Kenyan experience offers useful lessons in the pitfalls of institutional incoherence, but more importantly, the value of investing in and then promoting well-functioning institutions. © The Author 2016. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

26 CFR 1.597-4 - Bridge Banks and Agency Control.

Code of Federal Regulations, 2014 CFR

2014-04-01

... (g) of this section, Agency Control of an Institution does not terminate the Institution's membership.... (3) Toll charge. The amount described in this paragraph (g)(3) is the excess of the Institution's... Institution transfers deposit liabilities to a Bridge Bank, and an election under paragraph (g) of this...

26 CFR 1.597-4 - Bridge Banks and Agency Control.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (g) of this section, Agency Control of an Institution does not terminate the Institution's membership.... (3) Toll charge. The amount described in this paragraph (g)(3) is the excess of the Institution's... Institution transfers deposit liabilities to a Bridge Bank, and an election under paragraph (g) of this...

Visualization and Quality Control Web Tools for CERES Products

NASA Astrophysics Data System (ADS)

Mitrescu, C.; Doelling, D. R.

2017-12-01

The NASA CERES project continues to provide the scientific communities a wide variety of satellite-derived data products such as observed TOA broadband shortwave and longwave observed fluxes, computed TOA and Surface fluxes, as well as cloud, aerosol, and other atmospheric parameters. They encompass a wide range of temporal and spatial resolutions, suited to specific applications. CERES data is used mostly by climate modeling communities but also by a wide variety of educational institutions. To better serve our users, a web-based Ordering and Visualization Tool (OVT) was developed by using Opens Source Software such as Eclipse, java, javascript, OpenLayer, Flot, Google Maps, python, and others. Due to increased demand by our own scientists, we also implemented a series of specialized functions to be used in the process of CERES Data Quality Control (QC) such as 1- and 2-D histograms, anomalies and differences, temporal and spatial averaging, side-by-side parameter comparison, and others that made the process of QC far easier and faster, but more importantly far more portable. With the integration of ground site observed surface fluxes we further facilitate the CERES project to QC the CERES computed surface fluxes. An overview of the CERES OVT basic functions using Open Source Software, as well as future steps in expanding its capabilities will be presented at the meeting.

Halloysite Nanocapsules Containing Thyme Essential Oil: Preparation, Characterization, and Application in Packaging Materials.

PubMed

Jang, Si-Hoon; Jang, So-Ri; Lee, Gyeong-Min; Ryu, Jee-Hoon; Park, Su-Il; Park, No-Hyung

2017-09-01

Halloysite nanotubes (HNTs), which are natural nanomaterials, have a hollow tubular structure with about 15 nm inner and 50 nm outer diameters. Because of their tubular shape, HNTs loaded with various materials have been investigated as functional nanocapsules. In this study, thyme essential oil (TO) was encapsulated successfully in HNTs using vacuum pulling methods, followed by end-capping or a layer-by-layer surface coating process for complete encapsulation. Nanocapsules loaded with TO were mixed with flexographic ink and coated on a paper for applications as food packaging materials. Scanning electron microscopy and transmission electron microscopy were used to characterize the morphology of the nanocapsules and to confirm the TO loading of the nanocapsules. Fourier transform infrared spectroscopy and thermogravimetric analyses analysis were used to complement the structural information. In addition, the controlled release of TO from the nanocapsules showed sustained release properties over a period of many days. The results reveal that the release properties of TO in these nanocapsules could be controlled by surface modifications such as end-capping and/or surface coating of bare nanocapsules. The packaging paper with TO-loaded HNT capsules was effective in eliminating against Escherichia coli during the first 5 d and showed strong antibacterial activity for about 10 d. © 2017 Institute of Food Technologists®.

Clarifying the Dynamics of the General Circulation: Phillips's 1956 Experiment.

NASA Astrophysics Data System (ADS)

Lewis, John M.

1998-01-01

In the mid-1950s, amid heated debate over the physical mechanisms that controlled the known features of the atmosphere's general circulation, Norman Phillips simulated hemispheric motion on the high-speed computer at the Institute for Advanced Study. A simple energetically consistent model was integrated for a simulated time of approximately 1 month. Analysis of the model results clarified the respective roles of the synoptic-scale eddies (cyclones-anticyclones) and mean meridional circulation in the maintenance of the upper-level westerlies and the surface wind regimes. Furthermore, the modeled cyclones clearly linked surface frontogenesis with the upper-level Charney-Eady wave. In addition to discussing the model results in light of the controversy and ferment that surrounded general circulation theory in the 1940s-1950s, an effort is made to follow Phillips's scientific path to the experiment.

Role of the ocean's AMOC in setting the uptake efficiency of transient tracers

NASA Astrophysics Data System (ADS)

Romanou, A.; Marshall, J.; Kelley, M.; Scott, J. R.

2017-12-01

The central role played by the ocean's Atlantic Meridional Overturning Circulation (AMOC) in the uptake and sequestration of transient tracers is studied in a series of experiments with the Goddard Institute for Space Studies and Massachusetts Institute of Technology ocean circulation models. Forced by observed atmospheric time series of CFC-11, both models exhibit realistic distributions in the ocean, with similar surface biases but different response over time. To better understand what controls uptake, we ran idealized forcing experiments in which the AMOC strength varied over a wide range, bracketing the observations. We found that differences in the strength and vertical scale of the AMOC largely accounted for the different rates of CFC-11 uptake and vertical distribution thereof. A two-box model enables us to quantify and relate uptake efficiency of passive tracers to AMOC strength and how uptake efficiency decreases in time. We also discuss the relationship between passive tracer and heat uptake efficiency, of which the latter controls the transient climate response to anthropogenic forcing in the North Atlantic. We find that heat uptake efficiency is substantially less (by about a factor of 5) than that for a passive tracer.

12 CFR 303.245 - Waiver of liability for commonly controlled depository institutions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Waiver of liability for commonly controlled depository institutions. 303.245 Section 303.245 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION... controlled depository institutions. (a) Scope. Section 5(e) of the FDI Act (12 U.S.C. 1815(e)) creates...

Institutional Controls: A Guide to Planning, Implementing, Maintaining, and Enforcing Institutional Controls at Contaminated Sites

EPA Pesticide Factsheets

This guide provides information and recommendations that should be useful for planning, implementing, maintaining, and enforcing institutional controls (ICs) for Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA, or Superfund); Brownfields; federal facility; underground storage tank (UST); and Resource Conservation and Recovery Act (RCRA) site cleanups.

76 FR 64353 - Request for Public Comment on Draft Document: “Criteria for a Recommended Standard: Occupational...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control and Prevention (CDC...: The National Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control..., Director, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention...

Cloud cover determination in polar regions from satellite imagery

NASA Technical Reports Server (NTRS)

Barry, R. G.; Key, J. R.; Maslanik, J. A.

1988-01-01

The principal objectives of this project are: to develop suitable validation data sets to evaluate the effectiveness of the ISCCP operational algorithm for cloud retrieval in polar regions and to validate model simulations of polar cloud cover; to identify limitations of current procedures for varying atmospheric surface conditions, and to explore potential means to remedy them using textural classifiers: and to compare synoptic cloud data from a control run experiment of the Goddard Institute for Space Studies (GISS) climate model 2 with typical observed synoptic cloud patterns. Current investigations underway are listed and the progress made to date is summarized.

Efficacy of Neutral Electrolyzed Water, Quaternary Ammonium and Lactic Acid-Based Solutions in Controlling Microbial Contamination of Food Cutting Boards Using a Manual Spraying Technique.

PubMed

Al-Qadiri, Hamzah M; Ovissipour, Mahmoudreza; Al-Alami, Nivin; Govindan, Byju N; Shiroodi, Setareh Ghorban; Rasco, Barbara

2016-05-01

Bactericidal activity of neutral electrolyzed water (NEW), quaternary ammonium (QUAT), and lactic acid-based solutions was investigated using a manual spraying technique against Salmonella Typhimurium, Escherichia coli O157:H7, Campylobacter jejuni, Listeria monocytogenes and Staphylococcus aureus that were inoculated onto the surface of scarred polypropylene and wooden food cutting boards. Antimicrobial activity was also examined when using cutting boards in preparation of raw chopped beef, chicken tenders or salmon fillets. Viable counts of survivors were determined as log10 CFU/100 cm(2) within 0 (untreated control), 1, 3, and 5 min of treatment at ambient temperature. Within the first minute of treatment, NEW and QUAT solutions caused more than 3 log10 bacterial reductions on polypropylene surfaces whereas less than 3 log10 reductions were achieved on wooden surfaces. After 5 min of treatment, more than 5 log10 reductions were achieved for all bacterial strains inoculated onto polypropylene surfaces. Using NEW and QUAT solutions within 5 min reduced Gram-negative bacteria by 4.58 to 4.85 log10 compared to more than 5 log10 reductions in Gram-positive bacteria inoculated onto wooden surfaces. Lactic acid treatment was significantly less effective (P < 0.05) compared to NEW and QUAT treatments. A decline in antimicrobial effectiveness was observed (0.5 to <2 log10 reductions were achieved within the first minute) when both cutting board types were used to prepare raw chopped beef, chicken tenders or salmon fillets. © 2016 Institute of Food Technologists®

Effect of ground control mesh on dust sampling and explosion mitigation.

PubMed

Alexander, D W; Chasko, L L

2015-07-01

Researchers from the National Institute for Occupational Safety and Health's Office of Mine Safety and Health Research conducted an assessment of the effects that ground control mesh might have on rock and float coal dust distribution in a coal mine. The increased use of mesh to control roof and rib spall introduces additional elevated surfaces on which rock or coal dust can collect. It is possible to increase the potential for dust explosion propagation if any float coal dust is not adequately inerted. In addition, the mesh may interfere with the collection of representative dust samples when using the pan-and-brush sampling method developed by the U.S. Bureau of Mines and used by the Mine Safety and Health Administration for band sampling. This study estimates the additional coal or rock dust that could accumulate on mesh and develops a means to collect representative dust samples from meshed entries.

Effect of ground control mesh on dust sampling and explosion mitigation

PubMed Central

Alexander, D.W.; Chasko, L.L.

2017-01-01

Researchers from the National Institute for Occupational Safety and Health’s Office of Mine Safety and Health Research conducted an assessment of the effects that ground control mesh might have on rock and float coal dust distribution in a coal mine. The increased use of mesh to control roof and rib spall introduces additional elevated surfaces on which rock or coal dust can collect. It is possible to increase the potential for dust explosion propagation if any float coal dust is not adequately inerted. In addition, the mesh may interfere with the collection of representative dust samples when using the pan-and-brush sampling method developed by the U.S. Bureau of Mines and used by the Mine Safety and Health Administration for band sampling. This study estimates the additional coal or rock dust that could accumulate on mesh and develops a means to collect representative dust samples from meshed entries. PMID:28936000

Protection of electronic health records (EHRs) in cloud.

PubMed

Alabdulatif, Abdulatif; Khalil, Ibrahim; Mai, Vu

2013-01-01

EHR technology has come into widespread use and has attracted attention in healthcare institutions as well as in research. Cloud services are used to build efficient EHR systems and obtain the greatest benefits of EHR implementation. Many issues relating to building an ideal EHR system in the cloud, especially the tradeoff between flexibility and security, have recently surfaced. The privacy of patient records in cloud platforms is still a point of contention. In this research, we are going to improve the management of access control by restricting participants' access through the use of distinct encrypted parameters for each participant in the cloud-based database. Also, we implement and improve an existing secure index search algorithm to enhance the efficiency of information control and flow through a cloud-based EHR system. At the final stage, we contribute to the design of reliable, flexible and secure access control, enabling quick access to EHR information.

Institutions and the implementation of tobacco control in Brazil.

PubMed

Lencucha, Raphael; Drope, Jeffrey; Bialous, Stella Aguinaga; Richter, Ana Paula; Silva, Vera Luiza da Costa E

2017-10-19

This research examines the institutional features of Brazil's National Commission for the Implementation of the Framework Convention on Tobacco Control (CONICQ) and how these institutional features have facilitated and hindered its ability to foster intersectoral tobacco control. In particular, we evaluate the key institutional features of CONICQ starting from when it was one of the key drivers of change and improvements in early tobacco control policies, which helped to make Brazil a world leader in this area. We also examine how the committee has evolved, as tobacco control has improved and particularly elucidate some of the major challenges that it faces to bring together often disparate government sectors to generate public health policies.

Funding and Institutional Options for Freight Infrastructure Improvements

DOT National Transportation Integrated Search

2000-08-01

The Norman Y. Mineta International Institute for Surface Transportation Policy Studies (IISTPS) at San Jose State University conducted this study to review the issues and implications involved in the investment of public funds in private freight infr...

Activities at the Lunar and Planetary Institute

NASA Technical Reports Server (NTRS)

Burke, K.

1984-01-01

The scientific and administrative activities of the Lunar and Planetary Institute are summarized. Recent research relating to geophysics, planetary geology, the origin of the Earth and Moon, the lunar surface, Mars, meteorites, and image processing techniques is discussed.

Occupational Exposure to Chemotherapy of Pharmacy Personnel at a Single Centre

PubMed Central

Ramphal, Raveena; Bains, Tejinder; Goulet, Geneviève; Vaillancourt, Régis

2015-01-01

Background: Cyclophosphamide is one of the most commonly used chemotherapy drugs worldwide. Data concerning environmental contamination and biological exposure of pharmacy personnel to this and other chemotherapy drugs are limited. Objectives: To determine whether pharmacy personnel involved in preparing and checking cyclophosphamide doses were more likely to have detectable levels of this drug in their urine than non-oncology pharmacy personnel with no known contact with the drug, and to compare the degree of surface contamination with cyclophosphamide, methotrexate, and ifosfamide in the oncology pharmacy of a tertiary care pediatric hospital, where chemotherapy doses were prepared, and the main (control) pharmacy in the same institution, where no chemotherapy was prepared. Methods: Biological exposure to cyclophosphamide was compared between pharmacy personnel who did and did not handle this drug by determining whether participants had detectable amounts of cyclophosphamide in their urine. Environmental exposure to chemotherapy drugs was assessed by using surface wipes to determine the degree of surface contamination with various chemotherapy agents in the oncology pharmacy and the main (control) pharmacy. Results: On initial testing, cyclophosphamide was detected in the urine of all pharmacy personnel (n = 7 oncology personnel, n = 5 control personnel). However, it was determined that all control personnel had been exposed to the oncology pharmacy on the day of testing. Repeat testing of these individuals revealed no positive samples among those not exposed to the oncology pharmacy on the day of repeat testing. The sole positive result on retesting of control personnel was for a participant who had been exposed to the oncology pharmacy on the retest day. Surface wipe testing revealed contamination of the oncology pharmacy with cyclophosphamide and methotrexate before and after cleaning, as well as contamination with ifosfamide after cleaning. The main (control) pharmacy showed no evidence of contamination with cyclophosphamide, methotrexate, or ifosfamide. Conclusions: The findings suggest that environmental contamination plays a role in biological exposure to cyclophosphamide. Measures to reduce environmental contamination from chemotherapy and biological exposure of pharmacy personnel when handling chemotherapy agents should be identified and implemented as a priority. PMID:25964681

Cleaning Genesis Sample Return Canister for Flight: Lessons for Planetary Sample Return

NASA Technical Reports Server (NTRS)

Allton, J. H.; Hittle, J. D.; Mickelson, E. T.; Stansbery, Eileen K.

2016-01-01

Sample return missions require chemical contamination to be minimized and potential sources of contamination to be documented and preserved for future use. Genesis focused on and successfully accomplished the following: - Early involvement provided input to mission design: a) cleanable materials and cleanable design; b) mission operation parameters to minimize contamination during flight. - Established contamination control authority at a high level and developed knowledge and respect for contamination control across all institutions at the working level. - Provided state-of-the-art spacecraft assembly cleanroom facilities for science canister assembly and function testing. Both particulate and airborne molecular contamination was minimized. - Using ultrapure water, cleaned spacecraft components to a very high level. Stainless steel components were cleaned to carbon monolayer levels (10 (sup 15) carbon atoms per square centimeter). - Established long-term curation facility Lessons learned and areas for improvement, include: - Bare aluminum is not a cleanable surface and should not be used for components requiring extreme levels of cleanliness. The problem is formation of oxides during rigorous cleaning. - Representative coupons of relevant spacecraft components (cut from the same block at the same time with identical surface finish and cleaning history) should be acquired, documented and preserved. Genesis experience suggests that creation of these coupons would be facilitated by specification on the engineering component drawings. - Component handling history is critical for interpretation of analytical results on returned samples. This set of relevant documents is not the same as typical documentation for one-way missions and does include data from several institutions, which need to be unified. Dedicated resources need to be provided for acquiring and archiving appropriate documents in one location with easy access for decades. - Dedicated, knowledgeable contamination control oversight should be provided at sites of fabrication and integration. Numerous excellent Genesis chemists and analytical facilities participated in the contamination oversight; however, additional oversight at fabrication sites would have been helpful.

An assessment of radiation doses at an educational institution 57.8 km away from the Fukushima Daiichi nuclear power plant 1 month after the nuclear accident.

PubMed

Tsuji, Masayoshi; Kanda, Hideyuki; Kakamu, Takeyasu; Kobayashi, Daisuke; Miyake, Masao; Hayakawa, Takehito; Mori, Yayoi; Okochi, Toshiyasu; Hazama, Akihiro; Fukushima, Tetsuhito

2012-03-01

On 11 March 2011, the Great East Japan Earthquake occurred. Due to this earthquake and subsequent tsunami, malfunctions occurred at the Fukushima Daiichi nuclear power plant. Radioactive material even reached the investigated educational institution despite being 57.8 km away from the power station. With the goal of ensuring the safety of our students, we decided to carry out a risk assessment of the premises of this educational institution by measuring radiation doses at certain locations, making it possible to calculate estimated radiation accumulation. Systematic sampling was carried out at measurement points spaced at regular intervals for a total of 24 indoor and outdoor areas, with 137 measurements at heights of 1 cm and 100 cm above the ground surface. Radiation survey meters were used to measure environmental radiation doses. Radiation dose rates and count rates were higher outdoors than indoors, and higher 1 cm above the ground surface than at 100 cm. Radiation doses 1 cm above the ground surface were higher on grass and moss than on asphalt and soil. The estimated radiation exposure for a student spending an average of 11 h on site at this educational institution was 9.80 μSv. Environmental radiation doses at our educational institution 57.8 km away from the Fukushima Daiichi nuclear power plant 1 month after the accident were lower than the national regulation dose for schools (3.8 μSv/h) at most points. Differences in radiation doses depending on outdoor surface properties are important to note for risk reduction.

Tobacco on campus: industry marketing and tobacco control policy among post-secondary institutions in Canada

PubMed Central

Hammond, D; Tremblay, I; Chaiton, M; Lessard, E; Callard, C; the, T

2005-01-01

Objective: Post-secondary institutions provide a unique opportunity to implement and evaluate leading edge tobacco policies, while influencing a key group of young adults. To date, however, we know little about the tobacco control environment at post-secondary institutions outside the USA. Design: Telephone surveys were conducted with campus informants from 35 post-secondary institutions in Canada to evaluate tobacco control policies and the presence of tobacco marketing on campus. Main outcome measures: Tobacco marketing on campus, tobacco control policies, and attitudes towards tobacco control. Results: The findings indicate that tobacco marketing is prevalent among post-secondary institutions in Canada. Every university and half of all colleges surveyed had participated in some form of tobacco marketing in the past year. Among universities, 80% had run a tobacco advertisement in their paper and 18% had hosted a tobacco sponsored nightclub event. Tobacco control policies varied considerably between institutions. Although several campuses had introduced leading edge policies, such as campus wide outdoor smoking restrictions and tobacco sales bans, there is a general lack of awareness of tobacco issues among campus decision makers and fundamental public health measures, such as indoor smoke-free policies, have yet to be introduced in many cases. Conclusions: Post-secondary institutions in Canada remain tobacco friendly environments. Without increased direction and support from the public health community, post-secondary institutions will continue to lag behind, rather than lead current policy standards. PMID:15791024

Architecture and Surface Chemistry of Compound Nanoclusters

DTIC Science & Technology

2012-07-31

Inorganic and organic chemistry in the gas phase," Molecular Dynamics Seminar, Fritz Haber Institute, Berlin, Germany, June 2010. 12. "Infrared...Patent Disclosures none Pi Honors/Awards Alexander von Humboldt Fellowship ( Fritz Haber Institute, Berlin), 2007-present American Chemical

Architecture and Surface Chemistry of Compound Nanoclusters

DTIC Science & Technology

2012-08-01

spectroscopy of metal carbonyls and carbocations: Inorganic and organic chemistry in the gas phase," Molecular Dynamics Seminar, Fritz Haber Institute...Disclosures none Pi Honors/Awards Alexander von Humboldt Fellowship ( Fritz Haber Institute, Berlin), 2007-present American Chemical Society

Local knowledge, science, and institutional change: the case of desertification control in Northern China.

PubMed

Yang, Lihua

2015-03-01

This article studies the influence of local knowledge on the impact of science on institutional change in ecological and environmental management. Based on an empirical study on desertification control in 12 counties in north China, the study found the following major results: (1) although there was a cubic relationship between the extent and effect of local knowledge, local knowledge significantly influenced the impact of science on institutional change; (2) local knowledge took effect mainly through affecting formal laws and regulations, major actors, and methods of desertification control in institutional change but had no significant impact on the types of property rights; and (3) local knowledge enhanced the impact of science on the results of desertification control through affecting the impact of science on institutional change. These findings provide a reference for researchers, policy makers, and practitioners, both in China and in other regions of the world, to further explore the influence of local knowledge on the impact of science on institutional change and the roles of local knowledge or knowledge in institutional change and governance.

Coupled interactions between tungsten surfaces and transient high-heat-flux deuterium plasmas

NASA Astrophysics Data System (ADS)

Takamura, S.; Uesugi, Y.

2015-03-01

Fundamental studies on the interactions between transient deuterium-plasma heat pulses and tungsten surfaces were carried out in terms of electrical, mechanical and thermal response in a compact plasma device AIT-PID (Aichi Institute of Technology-Plasma Irradiation Device). Firstly, electron-emission-induced surface-temperature increase is discussed in the surface-temperature range near tungsten's melting point, which is accomplished by controlling the sheath voltage and power transmission factor. Secondly, anomalous penetration of tungsten atomic efflux into the surrounding plasma was observed in addition to a normal layered population; it is discussed in terms of the effect of substantial tungsten influx into the deuterium plasma, which causes dissipation of plasma electron energy. Thirdly, a momentum input from pulsed plasma onto a tungsten target was observed visually. The force is estimated numerically by the accelerated ion flow to the target as well as the reaction of tungsten-vapour efflux. Finally, a discussion follows on the effects of the plasma heat pulses on the morphology of tungsten surface (originally a helium-induced ‘fuzzy’ nanostructure). A kind of bifurcated effect is obtained: melting and annealing. Open questions remain for all the phenomena observed, although sheath-voltage-dependent plasma-heat input may be a key parameter. Discussions on all these phenomena are provided by considering their implications to tokamak fusion devices.

Researches on tungsten carbide

NASA Astrophysics Data System (ADS)

1994-11-01

This paper summarizes results of the researches on tungsten carbide (WC), carried out in the 5-year period starting 1989 by the Science and Technology Agency's National Institute for Researches in Inorganic Materials. The high-frequency heating, floating zone technique, generally suited for growth of large-size, single crystals of high melting materials, is inapplicable to the hexagonal WC system, which is decomposed. This problem has been solved by adding boron to the system, to allow it to exist with the W-C-B melt at an equilibrium. The computer-aided control techniques have enabled automatic growth of the single crystals of carbides and borides. The de Haas-Van Alphen effect of the single WC crystals has been observed, to establish the Fermi surface model. The single crystals of transition metal carbides, such as WC, have been coated with the monolayer of graphite at high repeatability, to create the surface layer materials. An attempt has been done to produce the halite type structure by substituting Ti as the atom in the outermost layer of TiC by W. The new method, based on the low-speed deuterium ion scattering, has been developed to analyze the surface bonding conditions, clarifying the conditions of alkalis adsorbed on and bonded to metallic surfaces, and their surface reactivities.

One hundred years of the Fritz Haber Institute.

PubMed

Friedrich, Bretislav; Hoffmann, Dieter; James, Jeremiah

2011-10-17

We outline the institutional history and highlight aspects of the scientific history of the Fritz Haber Institute (FHI) of the Max Planck Society, successor to the Kaiser Wilhelm Institute for Physical Chemistry and Electrochemistry, from its founding in 1911 until about the turn of the 21st century. Established as one of the first two Kaiser Wilhelm Institutes, the Institute began as a much-awaited remedy for what prominent German chemists warned was the waning of Germany's scientific and technological superiority relative to the United States and to other European nations. The history of the Institute has largely paralleled that of 20th century Germany. It spearheaded the research and development of chemical weapons during World War I, then experienced a "golden era" during the 1920s and early 1930s, in spite of financial hardships. Under the National Socialists it suffered a purge of its scientific staff and a diversion of its research into the service of the new regime, accompanied by a breakdown in its international relations. In the immediate aftermath of World War II it suffered crippling material losses, from which it recovered slowly in the postwar era. In 1952, the Institute took the name of its founding director and the following year joined the fledgling Max Planck Society, successor to the Kaiser Wilhelm Society. During the 1950s and 1960s, the Institute supported diverse research into the structure of matter and electron microscopy in its geographically isolated and politically precarious location in West Berlin. In subsequent decades, as Berlin benefited from the policies of détente and later glasnost and the Max Planck Society continued to reassess its preferred model of a research institute, the FHI reorganized around a board of coequal scientific directors and renewed its focus on the investigation of elementary processes on surfaces and interfaces, topics of research that had been central to the work of Fritz Haber and the first "golden era" of the Institute. Throughout its one-hundred-year history, the Institute's pace-setting research has been shaped by dozens of distinguished scientists, among them seven Nobel laureates. Here we highlight the contributions made at the Institute to the fields of gas-phase kinetics and dynamics, early quantum physics, colloid chemistry, electron microscopy, and surface chemistry, and we give an account of the key role the Institute played in implementing the Berlin Electron Synchrotron (BESSY I and II). Current research at the Institute in surface science and catalysis as well as molecular physics and spectroscopy is exemplified in this issue [Angew. Chem. 2011, 123, 10242; Angew. Chem. Int. Ed. 2011, 50, 10064]. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Profile: Institute of Society, Ethics and the Life Sciences

ERIC Educational Resources Information Center

Callahan, Daniel

1971-01-01

Describes an institute founded to examine moral, ethical, and legal issues raised by possibilities of euthanasia, genetic engineering, behavior control, population control, and improved disease control. Indicates scope of present research. (Editor/AL)

Students' well-being in nursing undergraduate education.

PubMed

Tuomi, Jouni; Aimala, Anna-Mari; Plazar, Nadja; Starčič, Andreja Istenič; Žvanut, Boštjan

2013-06-01

Although previously the Job-Demand-Control-Support model has been successfully applied in many studies in the field of health care and education, the model was never used for the evaluation of the nursing students' well-being. The aim of this study was to promote nursing students' well-being. The objective was to verify whether the Job-Demand-Control-Support model is appropriate for the evaluation of their well-being. The Job-Demand-Control-Support model was implemented and investigated in a multiple-case study, which consisted of two phases. In phase I the students' well-being along with the perceived levels of control, support, and demand for each individual student during their study were identified. These results were used in phase II, where the usefulness of the presented model was evaluated. The study was performed at the end of the academic year 2009/2010 in two institutions: Tampere University of Applied Sciences, School of Health Care, Finland (institution 1); and the University of Primorska, Faculty of Health Sciences, Slovenia (institution 2). Participants of the study were nursing graduates who finished their studies in 2009/2010 and the Vice-Deans for education of both institutions. The final sample included 83 students in institution 1 and 79 students in institution 2. The case study was combined with a survey (phase I) and an interview (phase II). Although the students' well-being in these two institutions was different, most students of both institutions perceived their studies as low strain, placid, and only some of the students in both institutions had a high risk of malaise. The Vice-Deans for education of both institutions confirmed that the application of the Job-Demand-Control-Support model provided relevant information on the nursing students' well-being, which helped in planning improved nursing study programmes. This study demonstrated that the Job-Demand-Control-Support model is appropriate for estimating undergraduate nursing students' well-being. Copyright © 2013 Elsevier Ltd. All rights reserved.

Deformable structure registration of bladder through surface mapping.

PubMed

Xiong, Li; Viswanathan, Akila; Stewart, Alexandra J; Haker, Steven; Tempany, Clare M; Chin, Lee M; Cormack, Robert A

2006-06-01

Cumulative dose distributions in fractionated radiation therapy depict the dose to normal tissues and therefore may permit an estimation of the risk of normal tissue complications. However, calculation of these distributions is highly challenging because of interfractional changes in the geometry of patient anatomy. This work presents an algorithm for deformable structure registration of the bladder and the verification of the accuracy of the algorithm using phantom and patient data. In this algorithm, the registration process involves conformal mapping of genus zero surfaces using finite element analysis, and guided by three control landmarks. The registration produces a correspondence between fractions of the triangular meshes used to describe the bladder surface. For validation of the algorithm, two types of balloons were inflated gradually to three times their original size, and several computerized tomography (CT) scans were taken during the process. The registration algorithm yielded a local accuracy of 4 mm along the balloon surface. The algorithm was then applied to CT data of patients receiving fractionated high-dose-rate brachytherapy to the vaginal cuff, with the vaginal cylinder in situ. The patients' bladder filling status was intentionally different for each fraction. The three required control landmark points were identified for the bladder based on anatomy. Out of an Institutional Review Board (IRB) approved study of 20 patients, 3 had radiographically identifiable points near the bladder surface that were used for verification of the accuracy of the registration. The verification point as seen in each fraction was compared with its predicted location based on affine as well as deformable registration. Despite the variation in bladder shape and volume, the deformable registration was accurate to 5 mm, consistently outperforming the affine registration. We conclude that the structure registration algorithm presented works with reasonable accuracy and provides a means of calculating cumulative dose distributions.

Safe, Effective Use of Pesticides, A Manual for Commercial Applicators: Home, Institutional, and Structural Pest Control.

ERIC Educational Resources Information Center

Extension Service (USDA), Washington, DC.

This manual is designed to assist pest control operators to prepare for certification under the Michigan Pesticide Control Act of 1976. The primary focus of this publication is on home, institutional, and structural pest control. The ten sections included describe: (1) Insect control; (2) Rodent control; (3) Special situation pest control; (4)…

Hippocampus and Amygdala Morphology in Attention-Deficit/Hyperactivity Disorder

PubMed Central

Plessen, Kerstin J.; Bansal, Ravi; Zhu, Hongtu; Whiteman, Ronald; Amat, Jose; Quackenbush, Georgette A.; Martin, Laura; Durkin, Kathleen; Blair, Clancy; Royal, Jason; Hugdahl, Kenneth; Peterson, Bradley S.

2008-01-01

Context Limbic structures are implicated in the genesis of attention-deficit/hyperactivity disorder (ADHD) by the presence of mood and cognitive disturbances in affected individuals and by elevated rates of mood disorders in family members of probands with ADHD. Objective To study the morphology of the hippocampus and amygdala in children with ADHD. Design A cross-sectional case-control study of the hippocampus and amygdala using anatomical magnetic resonance imaging. Settings University research institute. Patients One hundred fourteen individuals aged 6 to 18 years, 51 with combined-type ADHD and 63 healthy controls. Main Outcome Measures Volumes and measures of surface morphology for the hippocampus and amygdala. Results The hippocampus was larger bilaterally in the ADHD group than in the control group (t=3.35; P<.002). Detailed surface analyses of the hippocampus further localized these differences to an enlarged head of the hippocampus in the ADHD group. Although conventional measures did not detect significant differences in amygdalar volumes, surface analyses indicated the presence of reduced size bilaterally over the area of the basolateral complex. Correlations with prefrontal measures suggested abnormal connectivity between the amygdala and prefrontal cortex in the ADHD group. Enlarged subregions of the hippocampus tended to accompany fewer symptoms. Conclusions The enlarged hippocampus in children and adolescents with ADHD may represent a compensatory response to the presence of disturbances in the perception of time, temporal processing (eg, delay aversion), and stimulus seeking associated with ADHD. Disrupted connections between the amygdala and orbitofrontal cortex may contribute to behavioral disinhibition. Our findings suggest involvement of the limbic system in the pathophysiology of ADHD. PMID:16818869

Traces of illegal drugs on body surfaces: indicator for consumption or dealing?

NASA Astrophysics Data System (ADS)

Aberl, Franz; Bonenberger, Johannes; Berg, Ralf-Peter; Zimmermann, Rudolph; Sachs, Hans W.

1997-01-01

Customs investigation and drug enforcement services are interest in a rapid and reliable identification of smugglers and dealers. In contrast workplace testing and traffic controls are aiming at the detection of intoxicated persons via the determination of illegal narcotics in body fluids like urine or blood. DRUGWIPE is a pen size, test strip based immunochemical detector for narcotic contaminations on surfaces. It is extremely simple to apply and takes about two minutes to read test results without depending upon any further technical means. This paper describes the applicability of DRUGWIPE to identify drug smugglers or dealers as well as consumers. With respect to the situation and the initial suspicion the test indicates handling as well as consumption. In cooperation with the Institute for Legal Medicine in Munich suspicious drivers were examined with DRUGWIPE for the abuse of illegal narcotics. Test results from this test series are presented and compared with the results from the blood or urine analysis. The question whether the detected traces of illegal narcotics on the body surface of suspicious drivers are combing transpiration or external contamination are discussed.

Role of bentonite clays on cell growth.

PubMed

Cervini-Silva, Javiera; Ramírez-Apan, María Teresa; Kaufhold, Stephan; Ufer, Kristian; Palacios, Eduardo; Montoya, Ascención

2016-04-01

Bentonites, naturally occurring clays, are produced industrially because of their adsorbent capacity but little is known about their effects on human health. This manuscript reports on the effect of bentonites on cell growth behaviour. Bentonites collected from India (Bent-India), Hungary (Bent-Hungary), Argentina (Bent-Argentina), and Indonesia (Bent-Indonesia) were studied. All four bentonites were screened in-vitro against two human cancer cell lines [U251 (central nervous system, glioblastoma) and SKLU-1 (lung adenocarcinoma)] supplied by the National Cancer Institute (USA). Bentonites induced growth inhibition in the presence of U251 cells, and growth increment in the presence of SKLU-1 cells, showing that interactions between bentonite and cell surfaces were highly specific. The proliferation response for U251 cells was explained because clay surfaces controlled the levels of metabolic growth components, thereby inhibiting the development of high-grade gliomas, particularly primary glioblastomas. On the other hand, the proliferation response for SKLU-1 was explained by an exacerbated growth favoured by swelling, and concomitant accumulation of solutes, and their hydration and transformation via clay-surface mediated reactions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Copper vapour laser ID labelling on metal dentures and restorations.

PubMed

Ling, B C; Nambiar, P; Low, K S; Lee, C K

2003-06-01

Denture marking is accepted as a means of identifying dentures and persons in geriatric institutions, or post-mortem during war, crimes, civil unrest, natural and mass disasters. Labelling on the acrylic resin component of the denture can easily be damaged or destroyed by fire but on cobalt-chromium components it would be more resistant. A copper vapour laser (CVL) can be used to label the cobalt-chromium components of dentures and metal restorations easily, and legibly, and miniaturised for the incorporation of more personal particulars necessary for the identification of the deceased person. The CVL beam is focussed by its optics and delivered to the material surface by the two-axis scanner mounted with mirrors. A personal computer controls the movement of the scanner and the firing of the CVL. The high peak power of the pulsed CVL is focussed to very high energy density producing plasma ablation of the alloy surface. Very fine markings of a few microns width can be produced enabling the storage of detailed information of the deceased person on a metal surface for the purpose of rapid identification.

Real-time dose calculation and visualization for the proton therapy of ocular tumours

NASA Astrophysics Data System (ADS)

Pfeiffer, Karsten; Bendl, Rolf

2001-03-01

A new real-time dose calculation and visualization was developed as part of the new 3D treatment planning tool OCTOPUS for proton therapy of ocular tumours within a national research project together with the Hahn-Meitner Institut Berlin. The implementation resolves the common separation between parameter definition, dose calculation and evaluation and allows a direct examination of the expected dose distribution while adjusting the treatment parameters. The new tool allows the therapist to move the desired dose distribution under visual control in 3D to the appropriate place. The visualization of the resulting dose distribution as a 3D surface model, on any 2D slice or on the surface of specified ocular structures is done automatically when adapting parameters during the planning process. In addition, approximate dose volume histograms may be calculated with little extra time. The dose distribution is calculated and visualized in 200 ms with an accuracy of 6% for the 3D isodose surfaces and 8% for other objects. This paper discusses the advantages and limitations of this new approach.

New experimental capability to investigate the hypervelocity micrometeoroid bombardment of cryogenic surfaces

NASA Astrophysics Data System (ADS)

Nelson, Andrew Oakleigh; Dee, Richard; Gudipati, Murthy S.; Horányi, Mihály; James, David; Kempf, Sascha; Munsat, Tobin; Sternovsky, Zoltán; Ulibarri, Zach

2016-02-01

Ice is prevalent throughout the solar system and beyond. Though the evolution of many of these icy surfaces is highly dependent on associated micrometeoroid impact phenomena, experimental investigation of these impacts has been extremely limited, especially at the impactor speeds encountered in space. The dust accelerator facility at the Institute for Modeling Plasmas, Atmospheres, and Cosmic Dust (IMPACT) of NASA's Solar System Exploration Research Virtual Institute has developed a novel cryogenic system that will facilitate future study of hypervelocity impacts into ice and icy regolith. The target consists of a copper block, cooled by liquid nitrogen, upon which layers of vapor-deposited ice, pre-frozen ice, or icy regolith can be built in a controlled and quantifiable environment. This ice can be grown from a variety of materials, including H2O, CH3OH, NH3, and slurries containing nanophase iron. Ice temperatures can be varied between 96 K and 150 K and ice thickness greater than 150 nm can be accurately measured. Importantly, the composition of ion plumes created during micrometeoroid impacts onto these icy layers can be measured even in trace amounts by in situ time-of-flight mass spectroscopy. In this paper, we present the fundamental design components of the cryogenic target chamber at IMPACT and proof-of-concept results from target development and from first impacts into thick layers of water ice.

28 CFR 54.205 - Educational institutions and other entities controlled by religious organizations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Educational institutions and other... JUSTICE (CONTINUED) NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 54.205 Educational institutions and other entities controlled by...

Salmon Site Remedial Investigation Report, Exhibit 5

DOE Office of Scientific and Technical Information (OSTI.GOV)

USDOE /NV

1999-09-01

This Salmon Site Remedial Investigation Report provides the results of activities initiated by the U.S. Department of Energy (DOE) to determine if contamination at the Salmon Site poses a current or future risk to human health and the environment. These results were used to develop and evaluate a range of risk-based remedial alternatives. Located in Lamar County, Mississippi, the Salmon Site was used by the U.S. Atomic Energy Commission (predecessor to the DOE) between 1964 and 1970 for two nuclear and two gas explosions conducted deep underground in a salt dome. The testing resulted in the release of radionuclides intomore » the salt dome. During reentry drilling and other site activities, liquid and solid wastes containing radioactivity were generated resulting in surface soil and groundwater contamination. Most of the waste and contaminated soil and water were disposed of in 1993 during site restoration either in the cavities left by the tests or in an injection well. Other radioactive wastes were transported to the Nevada Test Site for disposal. Nonradioactive wastes were disposed of in pits at the site and capped with clean soil and graded. The preliminary investigation showed residual contamination in the Surface Ground Zero mud pits below the water table. Remedial investigations results concluded the contaminant concentrations detected present no significant risk to existing and/or future land users, if surface institutional controls and subsurface restrictions are maintained. Recent sampling results determined no significant contamination in the surface or shallow subsurface. The test cavity resulting from the experiments is contaminated and cannot be economically remediated with existing technologies. The ecological sampling did not detect biological uptake of contaminants in the plants or animals sampled. Based on the current use of the Salmon Site, the following remedial actions were identified to protect both human health and the environment: (1) the installation of a water supply system that will provide potable water to the site and residence in the proximity to the site; (2) continued maintenance of surface institutional controls and subsurface restrictions; and (3) continue to implement the long-term hydrologic monitoring program. The Salmon Site will be relinquished the State of Mississippi as mandated by Public Law 104-201-September 23, 1996, to be used as a demonstration forest/wildlife refuge. Should the land use change in the future and/or monitoring information indicates a change in the site conditions, the DOE will reassess the risk impacts to human health and the environment.« less

Salmon Site Remedial Investigation Report, Main Body

DOE Office of Scientific and Technical Information (OSTI.GOV)

US DOE /NV

1999-09-01

This Salmon Site Remedial Investigation Report provides the results of activities initiated by the U.S. Department of Energy (DOE) to determine if contamination at the Salmon Site poses a current or future risk to human health and the environment. These results were used to develop and evaluate a range of risk-based remedial alternatives. Located in Lamar County, Mississippi, the Salmon Site was used by the U.S. Atomic Energy Commission (predecessor to the DOE) between 1964 and 1970 for two nuclear and two gas explosions conducted deep underground in a salt dome. The testing resulted in the release of radionuclides intomore » the salt dome. During reentry drilling and other site activities, liquid and solid wastes containing radioactivity were generated resulting in surface soil and groundwater contamination. Most of the waste and contaminated soil and water were disposed of in 1993 during site restoration either in the cavities left by the tests or in an injection well. Other radioactive wastes were transported to the Nevada Test Site for disposal. Nonradioactive wastes were disposed of in pits at the site and capped with clean soil and graded. The preliminary investigation showed residual contamination in the Surface Ground Zero mud pits below the water table. Remedial investigations results concluded the contaminant concentrations detected present no significant risk to existing and/or future land users, if surface institutional controls and subsurface restrictions are maintained. Recent sampling results determined no significant contamination in the surface or shallow subsurface. The test cavity resulting from the experiments is contaminated and cannot be economically remediated with existing technologies. The ecological sampling did not detect biological uptake of contaminants in the plants or animals sampled. Based on the current use of the Salmon Site, the following remedial actions were identified to protect both human health and the environment: (1) the installation of a water supply system that will provide potable water to the site and residence in the proximity to the site; (2) continued maintenance of surface institutional controls and subsurface restrictions; and (3) continue to implement the long-term hydrologic monitoring program. The Salmon Site will be relinquished the State of Mississippi as mandated by Public Law 104-201-September 23, 1996, to be used as a demonstration forest/wildlife refuge. Should the land use change in the future and/or monitoring information indicates a change in the site conditions, the DOE will reassess the risk impacts to human health and the environment.« less

Salmon Site Remedial Investigation Report, Exhibit 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

USDOE NV

1999-09-01

This Salmon Site Remedial Investigation Report provides the results of activities initiated by the U.S. Department of Energy (DOE) to determine if contamination at the Salmon Site poses a current or future risk to human health and the environment. These results were used to develop and evaluate a range of risk-based remedial alternatives. Located in Lamar County, Mississippi, the Salmon Site was used by the U.S. Atomic Energy Commission (predecessor to the DOE) between 1964 and 1970 for two nuclear and two gas explosions conducted deep underground in a salt dome. The testing resulted in the release of radionuclides intomore » the salt dome. During reentry drilling and other site activities, liquid and solid wastes containing radioactivity were generated resulting in surface soil and groundwater contamination. Most of the waste and contaminated soil and water were disposed of in 1993 during site restoration either in the cavities left by the tests or in an injection well. Other radioactive wastes were transported to the Nevada Test Site for disposal. Nonradioactive wastes were disposed of in pits at the site and capped with clean soil and graded. The preliminary investigation showed residual contamination in the Surface Ground Zero mud pits below the water table. Remedial investigations results concluded the contaminant concentrations detected present no significant risk to existing and/or future land users, if surface institutional controls and subsurface restrictions are maintained. Recent sampling results determined no significant contamination in the surface or shallow subsurface. The test cavity resulting from the experiments is contaminated and cannot be economically remediated with existing technologies. The ecological sampling did not detect biological uptake of contaminants in the plants or animals sampled. Based on the current use of the Salmon Site, the following remedial actions were identified to protect both human health and the environment: (1) the installation of a water supply system that will provide potable water to the site and residence in the proximity to the site; (2) continued maintenance of surface institutional controls and subsurface restrictions; and (3) continue to implement the long-term hydrologic monitoring program. The Salmon Site will be relinquished the State of Mississippi as mandated by Public Law 104-201-September 23, 1996, to be used as a demonstration forest/wildlife refuge. Should the land use change in the future and/or monitoring information indicates a change in the site conditions, the DOE will reassess the risk impacts to human health and the environment.« less

12 CFR 6.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... otherwise provided in this subpart. (b)(1) Control has the same meaning assigned to it in section 2 of the... the term control. (2) Exclusion for fiduciary ownership. No insured depository institution or company controls another insured depository institution or company by virtue of its ownership or control of shares...

Applications of surface metrology in firearm identification

NASA Astrophysics Data System (ADS)

Zheng, X.; Soons, J.; Vorburger, T. V.; Song, J.; Renegar, T.; Thompson, R.

2014-01-01

Surface metrology is commonly used to characterize functional engineering surfaces. The technologies developed offer opportunities to improve forensic toolmark identification. Toolmarks are created when a hard surface, the tool, comes into contact with a softer surface and causes plastic deformation. Toolmarks are commonly found on fired bullets and cartridge cases. Trained firearms examiners use these toolmarks to link an evidence bullet or cartridge case to a specific firearm, which can lead to a criminal conviction. Currently, identification is typically based on qualitative visual comparison by a trained examiner using a comparison microscope. In 2009, a report by the National Academies called this method into question. Amongst other issues, they questioned the objectivity of visual toolmark identification by firearms examiners. The National Academies recommended the development of objective toolmark identification criteria and confidence limits. The National Institute of Standards and Technology (NIST) have applied its experience in surface metrology to develop objective identification criteria, measurement methods, and reference artefacts for toolmark identification. NIST developed the Standard Reference Material SRM 2460 standard bullet and SRM 2461 standard cartridge case to facilitate quality control and traceability of identifications performed in crime laboratories. Objectivity is improved through measurement of surface topography and application of unambiguous surface similarity metrics, such as the maximum value (ACCFMAX) of the areal cross correlation function. Case studies were performed on consecutively manufactured tools, such as gun barrels and breech faces, to demonstrate that, even in this worst case scenario, all the tested tools imparted unique surface topographies that were identifiable. These studies provide scientific support for toolmark evidence admissibility in criminal court cases.

A Study on the Relationships among Surface Variables to Adjust the Height of Surface Temperature for Data Assimilation.

NASA Astrophysics Data System (ADS)

Kang, J. H.; Song, H. J.; Han, H. J.; Ha, J. H.

2016-12-01

The observation processing system, KPOP (KIAPS - Korea Institute of Atmospheric Prediction Systems - Package for Observation Processing) have developed to provide optimal observations to the data assimilation system for the KIAPS Integrated Model (KIM). Currently, the KPOP has capable of processing almost all of observations for the KMA (Korea Meteorological Administration) operational global data assimilation system. The height adjustment of SURFACE observations are essential for the quality control due to the difference in height between observation station and model topography. For the SURFACE observation, it is usual to adjust the height using lapse rate or hypsometric equation, which decides values mainly depending on the difference of height. We have a question of whether the height can be properly adjusted following to the linear or exponential relationship solely with regard to the difference of height, with disregard the atmospheric conditions. In this study, firstly we analyse the change of surface variables such as temperature (T2m), pressure (Psfc), humidity (RH2m and Q2m), and wind components (U and V) according to the height difference. Additionally, we look further into the relationships among surface variables . The difference of pressure shows a strong linear relationship with difference of height. But the difference of temperature according to the height shows a significant correlation with difference of relative humidity than with the height difference. A development of reliable model for the height-adjustment of surface temperature is being undertaken based on the preliminary results.

Teacher Attendance at a Summer Institute and High School Student Achievement

ERIC Educational Resources Information Center

Thelen, L. J.; Litsky, Warren

1972-01-01

Students of teachers who had attended a summer institute on water pollution control performed better on an achievement test at the end of the following school year than classes of teachers with equivalent qualifications who were not selected for the institute. Other control groups of students were also used. (AL)

Assessing Learning Quality: Reconciling Institutional, Staff and Educational Demands.

ERIC Educational Resources Information Center

Biggs, John

1996-01-01

Two frameworks for educational assessment distinguished, which is quantitative, adequate for construing some kinds of learning, and qualitative, which is more appropriate for most objectives in higher education. The paper argues that institutions implicitly encourage quantitative assessment, thus encouraging a surface approach to learning although…

An Overview of Brazilian Developments in Beamed Energy Aerospace Propulsion and Vehicle Performance Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minucci, M. A. S.

Beamed energy propulsion and beamed energy vehicle performance control concepts are equally promising and challenging. In Brazil, the two concepts are being currently investigated at the Prof Henry T Nagamatsu Laboratory of Aerothermodynamics and Hypersonics, of the Institute for Advanced Studies--IEAv, in collaboration with the Rensselaer Polytechnic Institute--RPI, Troy, NY, and the United States Air force Research Laboratory-AFRL. Until recently, only laser energy addition for hypersonic flow control was being investigated at the Laboratory using a 0.3 m nozzle exit diameter hypersonic shock tunnel, T2, and two 7 joule CO{sub 2} TEA lasers. Flow visualization, model pressure and heat fluxmore » measurements of the laser energy addition perturbed flow around a model were produced as a result of this joint IEAv-RPI investigation. Presently, with the participation of AFRL and the newly commissioned 0.6 m. nozzle exit diameter hypersonic shock tunnel, T3, a more ambitious project is underway. Two 400 Joule Lumonics 620 CO{sub 2} TEA lasers will deliver a 20 cm X 25 cm propulsive laser beam to a complete laser propelled air breather/rocket hypersonic engine, located inside T3 test section. Schlieren photographs of the flow inside de engine as well as surface and heat flux measurements will be performed for free stream Mach numbers ranging from 6 to 25. The present paper discusses past, present and future Brazilian activities on beamed energy propulsion and related technologies.« less

The TOPOMOD-ITN project: unravel the origin of Earth's topography from modelling deep-surface processes

NASA Astrophysics Data System (ADS)

Faccenna, C.; Funiciello, F.

2012-04-01

EC-Marie Curie Initial Training Networks (ITN) projects aim to improve the career perspectives of young generations of researchers. Institutions from both academic and industry sectors form a collaborative network to recruit research fellows and provide them with opportunities to undertake research in the context of a joint research training program. In this frame, TOPOMOD - one of the training activities of EPOS, the new-born European Research Infrastructure for Geosciences - is a funded ITN project designed to investigate and model how surface processes interact with crustal tectonics and mantle convection to originate and develop topography of the continents over a wide range of spatial and temporal scales. The multi-disciplinary approach combines geophysics, geochemistry, tectonics and structural geology with advanced geodynamic numerical/analog modelling. TOPOMOD involves 8 European research teams internationally recognized for their excellence in complementary fields of Earth Sciences (Roma TRE, Utrecht, GFZ, ETH, Cambridge, Durham, Rennes, Barcelona), to which are associated 5 research institutions (CNR-Italy, Univ. Parma, Univ. Lausanne, Univ. Montpellier, Univ. Mainz) , 3 high-technology enterprises (Malvern Instruments, TNO, G.O. Logical Consulting) and 1 large multinational oil and gas company (ENI). This unique network places emphasis in experience-based training increasing the impact and international visibility of European research in modeling. Long-term collaboration and synergy are established among the overmentioned research teams through 15 cross-disciplinary research projects that combine case studies in well-chosen target areas from the Mediterranean, the Middle and Far East, west Africa, and South America, with new developments in structural geology, geomorphology, seismology, geochemistry, InSAR, laboratory and numerical modelling of geological processes from the deep mantle to the surface. These multidisciplinary projects altogether aim to answer a key question in earth Sciences: how do deep and surface processes interact to shape and control the topographic evolution of our planet.

Modeling of subaqueous melting in Petermann Fjord, Northwestern Greenland using an ocean general circulation model

NASA Astrophysics Data System (ADS)

Cai, C.; Rignot, E. J.; Xu, Y.; An, L.; Tinto, K. J.; van den Broeke, M. R.

2014-12-01

Basal melting of the floating tongue of Petermann Glacier, in northwestern Greenland is by far the largest process of mass ablation. Melting of the floating tongue is controlled by the buoyancy of the melt water plume, the pressure-dependence of the melting point of sea ice, and the mixing of warm subsurface water with fresh buoyant subglacial discharge. In prior simulations of this melting process, the role of subglacial discharge has been neglected because in similar configurations (floating ice shelves) in the Antarctic, surface runoff is negligible; this is however not true in Greenland. Here, we use the Mass Institute of Technology general circulation model (MITgcm) at a high spatial resolution (10 m x 10 m) to simulate the melting process of the ice shelf in 2-D. The model is constrained by ice shelf bathymetry and ice thickness (refined model in the immediate vicinity of the grounding line) from NASA Operation IceBridge (2011), ocean temperature/salinity data from Johnson et al. (2011), ocean tide height and current from the Arctic Ocean Tidal Inverse Model (AOTIM-5) by Padman and Erofeeva (2004) and subglacial discharge at the grounding line calculated by the hydrostatic potential of the ice from estimated products of the Regional Atmospheric Climate Model (RACMO) of Royal Netherlands Meteorological Institute (KNMI). We compare the results obtained in winter (no runoff) with summer, and the sensitivity of the results to thermal forcing from the ocean, and to the variation of tide height and current, and to the magnitude of subglacial runoff. We conclude on the impact of the ocean and surface melting on the melting regime of the floating ice tongue of Petermann. The basal melt rate increases ~20% with summer surface runoff. This work is performed under a contract with NASA Cryosphere Program.

Requirements for a multi-scale, ultra wide-band National Geoelectromagnetic Facility (Invited)

NASA Astrophysics Data System (ADS)

Schultz, A.

2009-12-01

Advances in data acquisition technology and modeling make it possible to image the electrical properties of the near surface, crust and mantle in 3D. A generation of investigators is emerging whose research depends on application of complementary methods including magnetotelluric (MT) [micro-Hz to kHz sampling frequencies], natural audio (AMT) and controlled source and radio-frequency magnetotellurics (CSAMT, RFMT) [1 Hz-300 kHz], time-domain (TDEM) EM, as well as DC resistivity, induced polarization and ground-penetrating radar. Different process studies involve different depths and spatial scales, requiring target illumination by signals of different frequency content, and application of one or more of the methods above. Current practice often assumes that near surface and deeper crustal imaging problems can be decoupled by treating shallower heterogeneities in e.g. electrical conductivity structure as surface distortions that can be dealt with either through tensor stripping techniques or thin sheet modeling. Such methods are based on parametric models with implicit or explicit assumptions that may not in all cases be satisfied by the physics of the situation. Large-scale EM imaging programs such as EarthScope/USArray's magnetotelluric (MT) component seek to reconstruct the electrical conductivity structure of the US on the crustal-to-upper mantle scale. A variety of PI-led investigations seek to increase the resolving power of this effort through a combination of targeted, finer-spaced arrays, and by pushing into a higher frequency domain. As these efforts continue, great care has to be made in dealing with the impact of near surface heterogeneities. There is no national or regional scale set of near surface conductivity maps that one could use to strip near surface effects from deeper studies. National radio propagation/absorption maps were assembled by the FCC in the 1950's, and maps of ground-penetrating radar soil suitability provide a rough guide to surface conductance. Such information is insufficient to remove near surface effects for those imaging upper-to-mid crustal electrical properties. In order to obtain field measurements that can span near-surface through crust and upper mantle problems, an initiative to establish a multi-institutional National Geoelectromagnetic Facility has been proposed as part of a Virtual Institute for EM methods. An academic-industry partnership is designing a flexible, ultra wide-band system capable of being configured to obtain most of the data types indicated above. The system is specified to to provide between 100 dB - 130 dB dynamic range for sample rates from DC up to 2.5 MHz. A hybrid magnetic field sensor employing both induction coils and fluxgates, and a flexible arrangement of electric field sensors completes the specified receivers. The systems can be configured for sustained, low-power autonomous operation, or for higher power high frequency, active source operations. A series of controlled source transmitter systems is also specified. As financial support for the National Geoelectromagnetic Facility is being aligned, an organizational framework is being developed to permit efficient scheduling, data flow and archiving of resulting data sets. Education and outreach efforts are intrinsic to this, with close interactions with SAGE and other projects planned from the outset.

Nonlinear Effects in High Electric Fields

DTIC Science & Technology

1993-04-06

ion microscope above protruding atoms. Experiments to verify our theoret- ical predictions have been performed at the Fritz - Haber -Institute, see...Block’s experimental group at the Fritz - Haber -Institut in Berlin. A recent topic was thermal field desorption of hydrogen for which we have been able...Suchorskil, W. A. Schmidt’, J. H. Block’ and H. J. Kreuzer2 To be published in Surface Science ’Fitz- Haber Institut der Max-Planck-Gesellschaft

Local Government Planning Tool to Calculate Institutional and Engineering Control Costs for Brownfield Properties

EPA Pesticide Factsheets

This cost calculator is designed as a guide for municipal or local governments to assist in calculating their expected costs of implementing and conducting long-term stewardship of institutional controls and engineering controls at brownfield properties.

76 FR 13619 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Funding...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... Institute Pasteur of Madagascar and the Centers for Disease Control and Prevention on Malaria and Vector... Malaria Prevention and Control in the Republic of Uganda as Part of the President's Malaria Initiative... Institute Pasteur of Madagascar and the Centers for Disease Control and Prevention on Malaria and Vector...

Surface and basal ice shelf mass balance processes of the Southern McMurdo Ice Shelf determined through radar statistical reconnaissance

NASA Astrophysics Data System (ADS)

Grima, C.; Koch, I.; Greenbaum, J. S.; Soderlund, K. M.; Blankenship, D. D.; Young, D. A.; Fitzsimons, S.

2017-12-01

The McMurdo ice shelves (northern and southern MIS), adjacent to the eponymous station and the Ross Ice Shelf, Antarctica, are known for large gradients in surface snow accumulation and snow/ice impurities. Marine ice accretion and melting are important contributors to MIS's mass balance. Due to erosive winds, the southern MIS (SMIS) shows a locally negative surface mass balance. Thus, marine ice once accreted at the ice shelf base crops out at the surface. However, the exact processes that exert primary control on SMIS mass balance have remained elusive. Radar statistical reconnaissance (RSR) is a recent technique that has been used to characterize the surface properties of the Earth's cryosphere, Mars, and Titan from the stochastic character of energy scattered by the surface. Here, we apply RSR to map the surface density and roughness of the SMIS and extend the technique to derive the basal reflectance and scattering coefficients of the ice-ocean interface. We use an airborne radar survey grid acquired over the SMIS in the 2014-2015 austral summer by the University of Texas Institute for Geophysics with the High Capability Radar Sounder (HiCARS2; 60-MHz center frequency and 15-MHz bandwidth). The RSR-derived snow density values and patterns agree with directly -measured ice shelf surface accumulation rates. We also compare the composition of SMIS ice surface samples to test the ability of RSR to discriminate ices with varying dielectric properties (e.g., marine versus meteoric ice) and hypothesize relationships between the RSR-derived basal reflectance/scattered coefficients and accretion or melting at the ice-ocean interface. This improved knowledge of air-ice and ice-ocean boundaries provides a new perspective on the processes governing SMIS surface and basal mass balance.

Atomic Force Microscopy Analysis of Nanocrystalline Patterns Fabricated Using Micromolding in Capillaries

ERIC Educational Resources Information Center

Lyman, Benjamin M.; Farmer, Orrin J.; Ramsey, Ryan D.; Lindsey, Samuel T.; Stout, Stephanie; Robison, Adam; Moore, Holly J.; Sanders, Wesley C.

2012-01-01

A cost-effective, hands-on laboratory exercise is described for demonstrating nanoscale fabrication at non-research-based educational institutions. The laboratory exercise also contains a component involving qualitative and quantitative surface characterization of student-fabricated nanoscale structures at institutions with on-site access to an…

[Construction and operation status of management system of laboratories of schistosomiasis control institutions in Hubei Province].

PubMed

Zhao-Hui, Zheng; Jun, Qin; Li, Chen; Hong, Zhu; Li, Tang; Zu-Wu, Tu; Ming-Xing, Zeng; Qian, Sun; Shun-Xiang, Cai

2016-10-09

To analyze the construction and operation status of management system of laboratories of schistosomiasis control institutions in Hubei Province, so as to provide the reference for the standardized detection and management of schistosomiasis laboratories. According to the laboratory standard of schistosomiasis at provincial, municipal and county levels, the management system construction and operation status of 60 schistosomiasis control institutions was assessed by the acceptance examination method from 2013 to 2015. The management system was already occupied over all the laboratories of schistosomiasis control institutions and was officially running. There were 588 non-conformities and the inconsistency rate was 19.60%. The non-conformity rate of the management system of laboratory quality control was 38.10% (224 cases) and the non-conformity rate of requirements of instrument and equipment was 23.81% (140 cases). The management system has played an important role in the standardized management of schistosomiasis laboratories.

Changes in the lipid composition of Bradyrhizobium cell envelope reveal a rapid response to water deficit involving lysophosphatidylethanolamine synthesis from phosphatidylethanolamine in outer membrane.

PubMed

Cesari, Adriana B; Paulucci, Natalia S; Biasutti, María A; Morales, Gustavo M; Dardanelli, Marta S

2018-06-02

We evaluate the behavior of the membrane of Bradyrhizobium sp. SEMIA6144 during adaptation to polyethylene glycol (PEG). A dehydrating effect on the morphology of the cell surface, as well as a fluidizing effect on the membrane was observed 10 min after PEG shock; however, the bacteria were able to restore optimal membrane fluidity. Shock for 1 h caused an increase of lysophosphatidylethanolamine in the outer membrane at the expense of phosphatidylcholine and phosphatidylethanolamine (PE), through an increase in phospholipase activity. The amount of lysophosphatidylethanolamine did not remain constant during PEG shock, but after 24 h the outer membrane was composed of large amounts of phosphatidylcholine and less amount of lysophosphatidylethanolamine similar to the control. The inner membrane composition was also modified after 1 h of shock, observing an increase of phosphatidylcholine at the expense of PE, the proportions of these phospholipids were then modified to reach 24 h of shock values similar to the control. Vesicles prepared with the lipids of cells exposed to 1 h shock presented higher rigidity compared to the control, indicating that changes in the composition of phospholipids after 1 h of shock restoring fluidity after the PEG effect and would allow cells to maintain surface morphology. Copyright © 2018 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

Metal Exposures at three U.S. electronic scrap recycling facilities.

PubMed

Ceballos, Diana; Beaucham, Catherine; Page, Elena

2017-06-01

Many metals found in electronic scrap are known to cause serious health effects, including but not limited to cancer and respiratory, neurologic, renal, and reproductive damage. The National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention performed three health hazard evaluations at electronic scrap recycling facilities in the U.S. to characterize employee exposure to metals and recommend control strategies to reduce these exposures. We performed air, surface, and biological monitoring for metals. We found one overexposure to lead and two overexposures to cadmium. We found metals on non-production surfaces, and the skin and clothing of workers before they left work in all of the facilities. We also found some elevated blood lead levels (above 10 micrograms per deciliter), however no employees at any facility had detectable mercury in their urine or exceeded 34% of the OELs for blood or urine cadmium. This article focuses on sampling results for lead, cadmium, mercury, and indium. We provided recommendations for improving local exhaust ventilation, reducing the recirculation of potentially contaminated air, using respirators until exposures are controlled, and reducing the migration of contaminants from production to non-production areas. We also recommended ways for employees to prevent taking home metal dust by using work uniforms laundered on-site, storing personal and work items in separate lockers, and using washing facilities equipped with lead-removing cleaning products.

Institutional resources for communicable disease control in Europe: diversity across time and place.

PubMed

Mätzke, Margitta

2012-12-01

This commentary discusses the causes and consequences of diversity in how European countries organize communicable disease control. Drawing on the historical record of the US Centers for Disease Control and Prevention, it first reviews the main explanations of that diversity, with a focus on the political dynamic of building institutional capacity in the field of public health. It then examines the significance of institutional diversity in the process of Europeanization, and closes with a few thoughts on factors that have shaped the development of communicable disease control capacities in the United States and the European Union.

Protecting Surface Transportation Systems and Patrons from Terrorist Activities

DOT National Transportation Integrated Search

1997-11-01

This report documents the first phase of a continuing research effort carried out by the Norman Y. Mineta International Institute for Surface Transportation Policy Studies (IISTPS) on behalf of the U.S. Department of Transportation. It comprises a ch...

[Epidemiologic aspects of human immunodeficiency virus and hepatitis virus infections].

PubMed

Diarra, M; Konate, A; Minta, D; Sounko, A; Dembele, M; Toure, C S; Kalle, A; Traore, H H; Maiga, M Y

2006-01-01

In order to determinate the prevalence of hepatitis B virus and hepatitis C virus among patients infected by the HIV, We realized a transverse survey case--control in hepato-gastro-enterological ward and serology unity of National Institute of Research in Public health (INRSP). Our sample was constituted with 100 patients HIV positive compared to 100 controls HIV negative. The viral markers research has been made by methods immuno-enzymatiqueses of ELISA 3rd generation. Tests permitted to get the following results: Hepatitis B surface antigen (HBs Ag) was positive among 21% with patients HIV positive versus 23% among control (p = 0,732); Antibody to hepatitis C virus (anti-HCV ab) was present among 23% with patients HIV positive versus 0% among control (p <0,05). Female was predominant among co-infections patient, but without statistic link (p = 0,9 and p = 0,45); The co-infection HBV- HCV was significatively linked to age beyond 40 years (p = 0,0005). Co-infections with HIV infection and hepatitis virus are not rare and deserve to be investigated.

Electro-Optical Inspection For Tolerance Control As An Integral Part Of A Flexible Machining Cell

NASA Astrophysics Data System (ADS)

Renaud, Blaise

1986-11-01

Institut CERAC has been involved in optical metrology and 3-dimensional surface control for the last couple of years. Among the industrial applications considered is the on-line shape evaluation of machined parts within the manufacturing cell. The specific objective is to measure the machining errors and to compare them with the tolerances set by designers. An electro-optical sensing technique has been developed which relies on a projection Moire contouring optical method. A prototype inspection system has been designed, making use of video detection and computer image processing. Moire interferograms are interpreted, and the metrological information automatically retrieved. A structured database can be generated for subsequent data analysis and for real-time closed-loop corrective actions. A real-time kernel embedded into a synchronisation network (Petri-net) for the control of concurrent processes in the Electra-Optical Inspection (E0I) station was realised and implemented in a MODULA-2 program DIN01. The prototype system for on-line automatic tolerance control taking place within a flexible machining cell is described in this paper, together with the fast-prototype synchronisation program.

PREFACE: Quantum Dot 2010

NASA Astrophysics Data System (ADS)

Taylor, Robert A.

2010-09-01

These conference proceedings contain the written papers of the contributions presented at Quantum Dot 2010 (QD2010). The conference was held in Nottingham, UK, on 26-30 April 2010. The conference addressed topics in research on: 1. Epitaxial quantum dots (including self-assembled and interface structures, dots defined by electrostatic gates etc): optical properties and electron transport quantum coherence effects spin phenomena optics of dots in cavities interaction with surface plasmons in metal/semiconductor structures opto-electronics applications 2. Novel QD structures: fabrication and physics of graphene dots, dots in nano-wires etc 3. Colloidal quantum dots: growth (shape control and hybrid nanocrystals such as metal/semiconductor, magnetic/semiconductor) assembly and surface functionalisation optical properties and spin dynamics electrical and magnetic properties applications (light emitting devices and solar cells, biological and medical applications, data storage, assemblers) The Editors Acknowledgements Conference Organising Committee: Maurice Skolnick (Chair) Alexander Tartakovskii (Programme Chair) Pavlos Lagoudakis (Programme Chair) Max Migliorato (Conference Secretary) Paola Borri (Publicity) Robert Taylor (Proceedings) Manus Hayne (Treasurer) Ray Murray (Sponsorship) Mohamed Henini (Local Organiser) International Advisory Committee: Yasuhiko Arakawa (Tokyo University, Japan) Manfred Bayer (Dortmund University, Germany) Sergey Gaponenko (Stepanov Institute of Physics, Minsk, Belarus) Pawel Hawrylak (NRC, Ottawa, Canada) Fritz Henneberger (Institute for Physics, Berlin, Germany) Atac Imamoglu (ETH, Zurich, Switzerland) Paul Koenraad (TU Eindhoven, Nethehrlands) Guglielmo Lanzani (Politecnico di Milano, Italy) Jungil Lee (Korea Institute of Science and Technology, Korea) Henri Mariette (CNRS-CEA, Grenoble, France) Lu Jeu Sham (San Diego, USA) Andrew Shields (Toshiba Research Europe, Cambridge, UK) Yoshihisa Yamamoto (Stanford University, USA) Artur Zrenner (Paderborn University, Germany) International Programme Committee: Alexander Eychmüller (TU Dresden, Germany) Jonathan Finley (TU Munich, Germany) Dan Gammon (NRL, Washington, USA) Alexander Govorov (Ohio University, USA) Neil Greenham (Cavendish Laboratory, UK) Vladimir Korenev (Ioffe Institute, Russia) Leo Kouwenhoven (TU Delft, Netherlands) Wolfgang Langbein (Cardiff University, UK) Xavier Marie (CNRS Toulouse, France) David Ritchie (Cambridge, UK) Andrew Sachrajda (IMS, Ottawa, Canada) Katerina Soulantica (University of Toulouse, France) Seigo Tarucha (University of Tokyo, Japan) Carlos Tejedor (UAM, Madrid, Spain) Euijoon Yoon (Seoul National University, Korea) Ulrike Woggon (Tu Berlin, Germany) Proceedings edited and compiled by Profesor Robert A Taylor, University of Oxford

28 CFR 541.41 - Institutional referral.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INMATE DISCIPLINE AND SPECIAL HOUSING UNITS Control Unit Programs § 541.41 Institutional referral. (a) The Warden shall submit a recommendation for referral of an inmate for placement in a control unit to... following factors in a recommendation for control unit placement. (1) Any incident during confinement in...

Summary of Previous Chamber or Controlled Anthrax Studies and Recommendations for Possible Additional Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piepel, Gregory F.; Amidan, Brett G.; Morrow, Jayne B.

2010-12-29

This report and an associated Excel file(a) summarizes the investigations and results of previous chamber and controlled studies(b) to characterize the performance of methods for collecting, storing and/or transporting, extracting, and analyzing samples from surfaces contaminated by Bacillus anthracis (BA) or related simulants. This report and the Excel are the joint work of the Pacific Northwest National Laboratory (PNNL) and the National Institute of Standards and Technology (NIST) for the Department of Homeland Security, Science and Technology Directorate. The report was originally released as PNNL-SA-69338, Rev. 0 in November 2009 with limited distribution, but was subsequently cleared for release withmore » unlimited distribution in this Rev. 1. Only minor changes were made to Rev. 0 to yield Rev. 1. A more substantial update (including summarizing data from other studies and more condensed summary tables of data) is underway« less

A Self-Instructional Course in Student Financial Aid Administration. Module 15: Internal Aid Office Management and Institutional Quality Control. Second Edition.

ERIC Educational Resources Information Center

Washington Consulting Group, Inc., Washington, DC.

The 15th in a 17-module self-instructional course on student financial aid administration (designed for novice financial aid administrators and other institutional personnel) focuses on internal aid office management and institutional quality control. The course provides a systematic introduction to the management of federal financial aid programs…

78 FR 20755 - Definitions of “Predominantly Engaged In Financial Activities” and “Significant” Nonbank...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

... institution chartered and subject to the Farm Credit Act of 1971 (12 U.S.C. 2001 et seq.), (ii) a national... financial activities, as well as from the ownership or control of an insured depository institution... related to the ownership or control of an insured depository institution, represent 85 percent or more of...

Gaining control: reform, reimbursement and politics in New York's community hospitals, 1890--1915.

PubMed Central

Rosner, D

1980-01-01

This is an historical study of an early twentieth century political struggle regarding hospital reimbursement in New York City. During a period called the "Progressive Era" (1895--1915), administrators in the City's Comptroller's office sought to gain control over small, locally run community hospitals by dismantling the long-standing practice of flat-grant payments to institutions. Central office planners felt that these payments gave too much control to trustees. In its place, the Comptroller initiated a system of per-capita, per-diem reimbursement. Inspectors now judged for the institutions which services and which clients were appropriate for municipal reimbursement. From the perspective of the Comptroller's office, this change was an attempt to put rationality into the system of municipal support for charitable institutions. From the perspective of trustees and community representatives, however, this change was a political attack on the rights of institutions and local communities to control their own fate. Within the context of the larger Progressive Era "good government" movement to centralize decision-making in the hands of experts who believed strongly in the efficiency of larger institutions, it was generally the smallest, most financially troubled community institutions which felt the brunt of these changes. PMID:6990801

[Research on competency building standards of institutions of schistosomiasis prevention and control in Hubei Province. II. Investigation of human resources].

PubMed

Liu, Han-Cheng; Liao, Si-Qi; Zhong, Chen-Hui; He, Hui

2014-12-01

To understand the human resources of the grassroots institutions of schistosomiasis control and prevention, so as to provide the evidence for formulating the standards of institutional capacity-building. By using the combination of quantitative and qualitative methods, the hierarchy of schistosomiasis control institution workers, structural features of workers, and benefits of workers were investigated and the results were analyzed statistically after the 2004 reform. The constituent ratios of personnel ≤ 30 years old, 30 to 45 years old, and ≥ 45 years old were 6.8%, 64.0% and 29.2% respectively, with an average age of 43.1 years. For education levels, 61.35% of the personnel had secondary or high school levels. At the city level, the structural proportion of the senior professional; medium professional and primary professional titles was 1.4 : 5.6 : 3.0, and at the county level, the proportion was 0.5 : 6.1 : 3.4. There was 14 200 yuan per capita at the township schistosomiasis control institutions. The technology of the personnel in schistosomiasis institutions of Hubei Province is weak, the average age of personnel is old, and the salary is low.

A motion-classification strategy based on sEMG-EEG signal combination for upper-limb amputees.

PubMed

Li, Xiangxin; Samuel, Oluwarotimi Williams; Zhang, Xu; Wang, Hui; Fang, Peng; Li, Guanglin

2017-01-07

Most of the modern motorized prostheses are controlled with the surface electromyography (sEMG) recorded on the residual muscles of amputated limbs. However, the residual muscles are usually limited, especially after above-elbow amputations, which would not provide enough sEMG for the control of prostheses with multiple degrees of freedom. Signal fusion is a possible approach to solve the problem of insufficient control commands, where some non-EMG signals are combined with sEMG signals to provide sufficient information for motion intension decoding. In this study, a motion-classification method that combines sEMG and electroencephalography (EEG) signals were proposed and investigated, in order to improve the control performance of upper-limb prostheses. Four transhumeral amputees without any form of neurological disease were recruited in the experiments. Five motion classes including hand-open, hand-close, wrist-pronation, wrist-supination, and no-movement were specified. During the motion performances, sEMG and EEG signals were simultaneously acquired from the skin surface and scalp of the amputees, respectively. The two types of signals were independently preprocessed and then combined as a parallel control input. Four time-domain features were extracted and fed into a classifier trained by the Linear Discriminant Analysis (LDA) algorithm for motion recognition. In addition, channel selections were performed by using the Sequential Forward Selection (SFS) algorithm to optimize the performance of the proposed method. The classification performance achieved by the fusion of sEMG and EEG signals was significantly better than that obtained by single signal source of either sEMG or EEG. An increment of more than 14% in classification accuracy was achieved when using a combination of 32-channel sEMG and 64-channel EEG. Furthermore, based on the SFS algorithm, two optimized electrode arrangements (10-channel sEMG + 10-channel EEG, 10-channel sEMG + 20-channel EEG) were obtained with classification accuracies of 84.2 and 87.0%, respectively, which were about 7.2 and 10% higher than the accuracy by using only 32-channel sEMG input. This study demonstrated the feasibility of fusing sEMG and EEG signals towards improving motion classification accuracy for above-elbow amputees, which might enhance the control performances of multifunctional myoelectric prostheses in clinical application. The study was approved by the ethics committee of Institutional Review Board of Shenzhen Institutes of Advanced Technology, and the reference number is SIAT-IRB-150515-H0077.

Evaluation of Prerequisite Programs Implementation and Hygiene Practices at Social Food Services through Audits and Microbiological Surveillance.

PubMed

Garayoa, Roncesvalles; Yánez, Nathaly; Díez-Leturia, María; Bes-Rastrollo, Maira; Vitas, Ana Isabel

2016-04-01

Prerequisite programs are considered the most efficient tool for a successful implementation of self-control systems to ensure food safety. The main objective of this study was to evaluate the implementation of these programs in 15 catering services located in Navarra and the Basque Country (regions in northern Spain), through on-site audits and microbiological analyses. The implementation of the prerequisite program was incomplete in 60% of the sample. The unobserved temperature control during both the storage and preparation of meals in 20% of the kitchens reveals misunderstanding in the importance of checking these critical control points. A high level of food safety and hygiene (absence of pathogens) was observed in the analyzed meals, while 27.8% of the tested surfaces exceeded the established limit for total mesophilic aerobic microorganisms (≤100 CFU/25 cm²). The group of hand-contact surfaces (oven door handles and aprons) showed the highest level of total mesophilic aerobic microorganisms and Enterobacteriaceae, and the differences observed with respect to the food-contact surfaces (work and distribution utensils) were statistically significant (P < 0.001). With regard to the food workers' hands, lower levels of microorganisms were observed in the handlers wearing gloves (that is, for Staphylococcus spp we identified 43 CFU/cm2 on average compared with 4 CFU/cm2 (P < 0.001) for those not wearing and wearing gloves, respectively). For a proper implementation of the prerequisites, it is necessary to focus on attaining a higher level of supervision of activities and better hygiene training for the food handlers, through specific activities such as informal meetings and theoretical-practical sessions adapted to the characteristics of each establishment. © 2016 Institute of Food Technologists®

A longitudinal and experimental study of the impact of knowledge on the bases of institutional trust

PubMed Central

Kimbrough, Christopher D.; Shockley, Ellie; Neal, Tess M. S.; Herian, Mitchel N.; Hamm, Joseph A.; Bornstein, Brian H.; Tomkins, Alan J.

2017-01-01

This study examined a knowledge-centered theory of institutional trust development. In the context of trust in water regulatory institutions, the moderating impact of knowledge was tested to determine if there were longitudinal changes in the bases of institutional trust as a function of increases in knowledge about a target institution. We hypothesized that as people learn about an institution with which they were previously unfamiliar, they begin to form more nuanced perceptions, distinguishing the new institution from other institutions and relying less upon their generalized trust to estimate their trust in that institution. Prior to having specific, differential information about a new institution, we expected institutional trust to be a function of generalized trust variables such as dispositional trust and trust in government. The longitudinal experiment involved 185 college students randomly assigned to one of three information conditions. Every 3 months for 15 months, participants read information about water regulatory institutions or a control institution. At each time point, participants reported their trust in and perceptions of the trust- and distrust-worthiness of the water regulatory institutions. Participants also completed measures of knowledge of water regulatory institutions, dispositional trust, and governmental trust. Our manipulation check indicated that, as expected, those in the experimental group increased in subjective knowledge of water regulatory institutions to a greater extent than those in the control condition. Consistent with our hypotheses, there was some evidence that, compared to the control group, the experimental group relied less on their general trust in government as a basis for their trust in water regulatory institutions. However, contrary to our hypotheses, there was no evidence the experimental group relied less on dispositional trust as a basis for institutional trust. There also was some evidence the experimental group’s trust in water regulatory institutions was less affected by fluctuations of trustworthiness (but not distrustworthiness) perceptions over time. This suggests that knowledge results in the development of more stable institutional trust attitudes, but that trustworthiness and distrustworthiness perceptions may operate somewhat differently when impacting trust in specific institutions. PMID:28414808

A longitudinal and experimental study of the impact of knowledge on the bases of institutional trust.

PubMed

PytlikZillig, Lisa M; Kimbrough, Christopher D; Shockley, Ellie; Neal, Tess M S; Herian, Mitchel N; Hamm, Joseph A; Bornstein, Brian H; Tomkins, Alan J

2017-01-01

This study examined a knowledge-centered theory of institutional trust development. In the context of trust in water regulatory institutions, the moderating impact of knowledge was tested to determine if there were longitudinal changes in the bases of institutional trust as a function of increases in knowledge about a target institution. We hypothesized that as people learn about an institution with which they were previously unfamiliar, they begin to form more nuanced perceptions, distinguishing the new institution from other institutions and relying less upon their generalized trust to estimate their trust in that institution. Prior to having specific, differential information about a new institution, we expected institutional trust to be a function of generalized trust variables such as dispositional trust and trust in government. The longitudinal experiment involved 185 college students randomly assigned to one of three information conditions. Every 3 months for 15 months, participants read information about water regulatory institutions or a control institution. At each time point, participants reported their trust in and perceptions of the trust- and distrust-worthiness of the water regulatory institutions. Participants also completed measures of knowledge of water regulatory institutions, dispositional trust, and governmental trust. Our manipulation check indicated that, as expected, those in the experimental group increased in subjective knowledge of water regulatory institutions to a greater extent than those in the control condition. Consistent with our hypotheses, there was some evidence that, compared to the control group, the experimental group relied less on their general trust in government as a basis for their trust in water regulatory institutions. However, contrary to our hypotheses, there was no evidence the experimental group relied less on dispositional trust as a basis for institutional trust. There also was some evidence the experimental group's trust in water regulatory institutions was less affected by fluctuations of trustworthiness (but not distrustworthiness) perceptions over time. This suggests that knowledge results in the development of more stable institutional trust attitudes, but that trustworthiness and distrustworthiness perceptions may operate somewhat differently when impacting trust in specific institutions.

12 CFR 208.41 - Definitions for purposes of this subpart.

Code of Federal Regulations, 2010 CFR

2010-01-01

... set forth in section 38 and section 3 of the FDI Act. (a) Control—(1) Control has the same meaning... be construed consistently with the term control. (2) Exclusion for fiduciary ownership. No insured depository institution or company controls another insured depository institution or company by virtue of its...

76 FR 46299 - NIOSH List of Antineoplastic and Other Hazardous Drugs in Healthcare Settings 2012: Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-02

... National Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control and..., Director, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [Docket Number...

No Safety Net for Disabled Children in Residential Institutions in Ireland

ERIC Educational Resources Information Center

Conroy, Pauline

2012-01-01

The voices of adults and children with disabilities who have experienced violence and abuse are slowly beginning to surface in the public domain. Segregated residential institutions run by religious congregations appear to be dangerous places for children with disabilities and perceived differences--according to the former residents, speaking and…

SAR Polarimetric Scattering from Natural Terrains

DTIC Science & Technology

2017-02-17

Public Release 13. SUPPLEMENTARY NOTES 14. ABSTRACT Radar polarimetry and speckles of random rough surface scattering is studied using 3-D numerical...Performance : 04/18/2013 - 04/17/2016 AOARD PM: Dr. Seng Hong Abstract : Radar polarimetry and speckles of random rough surface scattering is studied using 3...Doctoral Dissertation Title : Polarimetry In Radar Backscattering from Soil and Vegetated Surfaces Institution : University of Washington, Seattle

Molecules at surfaces: 100 years of physical chemistry in Berlin-Dahlem.

PubMed

Ertl, Gerhard

2013-01-02

Scratching the surface: for over 100 years the interactions of molecules at surfaces have been studied at the Fritz Haber Institute of the Max Planck Society, Berlin. Nobel Laureate Gerhard Ertl looks back at some of the key developments in this time, and the people who made them. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design of a surface deformation measuring instrument for the Surface Tension Driven Convection Experiment (STDCE-2)

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

1993-01-01

This final technical report covers the work accomplished (under NAG3-1300) from 1 October 1991 to 1 October 1993. The grant is a direct result of Dr. H. Philip Stahl's (of Rose-Hulman Institute of Technology) participation in the NASA/ASEE Summer Faculty Fellowship Program at NASA Lewis Research Center sponsored by Case Western Reserve University and the Ohio Aerospace Institute. The Surface Tension Driven Convection Experiment (STDCE) is a fundamental fluid physics experiment designed to provide quantitative data on the thermocapillary flow of fluid under the influence of an increased localized surface temperature. STDCE flew on the Space Shuttle Columbia in the First United States Microgravity Laboratory (USML-1) in June 1992. The second flight of this experiment (STDCE-2) is scheduled for 1995. The specific science objectives of STDCE-2 are to determine the extent and nature of thermocapillary flows, the effect of heating mode and level, the effect of the liquid free-surface shape, and the onset conditions for and nature of oscillatory flows. In order to satisfy one of these objectives, an instrument for measuring the shape of an air/oil free surface must be developed.

Role of the Soil Thermal Inertia in the short term variability of the surface temperature and consequences for the soil-moisture temperature feedback

NASA Astrophysics Data System (ADS)

Cheruy, Frederique; Dufresne, Jean-Louis; Ait Mesbah, Sonia; Grandpeix, Jean-Yves; Wang, Fuxing

2017-04-01

A simple model based on the surface energy budget at equilibrium is developed to compute the sensitivity of the climatological mean daily temperature and diurnal amplitude to the soil thermal inertia. It gives a conceptual framework to quantity the role of the atmospheric and land surface processes in the surface temperature variability and relies on the diurnal amplitude of the net surface radiation, the sensitivity of the turbulent fluxes to the surface temperature and the thermal inertia. The performances of the model are first evaluated with 3D numerical simulations performed with the atmospheric (LMDZ) and land surface (ORCHIDEE) modules of the Institut Pierre Simon Laplace (IPSL) climate model. A nudging approach is adopted, it prevents from using time-consuming long-term simulations required to account for the natural variability of the climate and allow to draw conclusion based on short-term (several years) simulations. In the moist regions the diurnal amplitude and the mean surface temperature are controlled by the latent heat flux. In the dry areas, the relevant role of the stability of the boundary layer and of the soil thermal inertia is demonstrated. In these regions, the sensitivity of the surface temperature to the thermal inertia is high, due to the high contribution of the thermal flux to the energy budget. At high latitudes, when the sensitivity of turbulent fluxes is dominated by the day-time sensitivity of the sensible heat flux to the surface temperature and when this later is comparable to the thermal inertia term of the sensitivity equation, the surface temperature is also partially controlled by the thermal inertia which can rely on the snow properties; In the regions where the latent heat flux exhibits a high day-to-day variability, such as transition regions, the thermal inertia has also significant impact on the surface temperature variability . In these not too wet (energy limited) and not too dry (moisture-limited) soil moisture (SM) ''hot spots'', it is generally admitted that the variability of the surface temperature is explained by the soil moisture trough its control on the evaporation. This work suggests that the impact of the soil moisture on the temperature through its impact on the thermal inertia can be as important as its direct impact on the evaporation. Contrarily to the evaporation related soil-moisture temperature negative feedback, the thermal inertia soil-moisture related feedback newly identified by this work is a positive feedback which limits the cooling when the soil moisture increases. These results suggest that uncertainties in the representation of the soil and snow thermal properties can be responsible of significant biases in numerical simulations and emphasize the need to carefully document and evaluate these quantities in the Land Surface Modules implemented in the climate models.

78 FR 46372 - Manufacturer of Controlled Substances; Notice of Registration; Research Triangle Institute

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-31

... bulk manufacturer of the following basic classes of controlled substances: Drug Schedule Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives for use by...

77 FR 30327 - Manufacturer of Controlled Substances; Notice Of Application; Research Triangle Institute

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

... the following basic classes of controlled substances: Drug Schedule Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives for use by their customers in...

77 FR 55504 - Manufacturer of Controlled Substances; Notice of Registration; Research Triangle Institute

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... classes of controlled substances: Drug Schedule Marihuana (7360) I Cocaine (9041) II The Institute will manufacture marihuana, and cocaine derivatives for use by their customers in analytical kits, reagents, and...

Turkey’s Civil-Military Relations In the Fight Against the PKK: How Has This Unconventional Task Affected the Control-Effectiveness Balance

DTIC Science & Technology

2016-09-01

Supreme Board of Radio and Television.163 State Security Court System is another institution that Toktas and Kurt label as the symbol of “the shadow...this context on democratic civilian control. Even though there have been minor changes at the institutional level, the TAF’s intense involvement in the...control. Even though there have been minor changes at the institutional level, the TAF’s intense involvement in the fight against the PKK has

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li Xiong; Viswanathan, Akila; Stewart, Alexandra J.

Cumulative dose distributions in fractionated radiation therapy depict the dose to normal tissues and therefore may permit an estimation of the risk of normal tissue complications. However, calculation of these distributions is highly challenging because of interfractional changes in the geometry of patient anatomy. This work presents an algorithm for deformable structure registration of the bladder and the verification of the accuracy of the algorithm using phantom and patient data. In this algorithm, the registration process involves conformal mapping of genus zero surfaces using finite element analysis, and guided by three control landmarks. The registration produces a correspondence between fractionsmore » of the triangular meshes used to describe the bladder surface. For validation of the algorithm, two types of balloons were inflated gradually to three times their original size, and several computerized tomography (CT) scans were taken during the process. The registration algorithm yielded a local accuracy of 4 mm along the balloon surface. The algorithm was then applied to CT data of patients receiving fractionated high-dose-rate brachytherapy to the vaginal cuff, with the vaginal cylinder in situ. The patients' bladder filling status was intentionally different for each fraction. The three required control landmark points were identified for the bladder based on anatomy. Out of an Institutional Review Board (IRB) approved study of 20 patients, 3 had radiographically identifiable points near the bladder surface that were used for verification of the accuracy of the registration. The verification point as seen in each fraction was compared with its predicted location based on affine as well as deformable registration. Despite the variation in bladder shape and volume, the deformable registration was accurate to 5 mm, consistently outperforming the affine registration. We conclude that the structure registration algorithm presented works with reasonable accuracy and provides a means of calculating cumulative dose distributions.« less

Environmental regulatory failure and metal contamination at the Giap Lai pyrite mine, Northern Vietnam.

PubMed

Håkan Tarras-Wahlberg, N; Nguyen, Lan T

2008-03-01

The causes for the failure in enforcement of environmental regulations at the Giap Lai pyrite mine in northern Vietnam are considered and the environmental impacts that are associated with this mine are evaluated. It is shown that sulphide-rich tailings and waste rock in the mining area represent significant sources of acid rock drainage (ARD). The ARD is causing elevated metal levels in downstream water bodies, which in turn, represent a threat to both human health and to aquatic ecosystems. Metal concentrations in impacted surface waters have increased after mine closure, suggesting that impacts are becoming progressively more serious. No post-closure, remediation measures have been applied at the mine, in spite of the existence of environmental legislation and both central and regional institutions charged with environmental supervision and control. The research presented here provides further emphasis for the recommendation that, while government institutions may need to be strengthened, and environmental regulations need to be in place, true on the ground improvement in environmental quality in Vietnam and in many other developing countries require an increased focus on promoting public awareness of industrial environmental issues.

Log-Normality and Multifractal Analysis of Flame Surface Statistics

NASA Astrophysics Data System (ADS)

Saha, Abhishek; Chaudhuri, Swetaprovo; Law, Chung K.

2013-11-01

The turbulent flame surface is typically highly wrinkled and folded at a multitude of scales controlled by various flame properties. It is useful if the information contained in this complex geometry can be projected onto a simpler regular geometry for the use of spectral, wavelet or multifractal analyses. Here we investigate local flame surface statistics of turbulent flame expanding under constant pressure. First the statistics of local length ratio is experimentally obtained from high-speed Mie scattering images. For spherically expanding flame, length ratio on the measurement plane, at predefined equiangular sectors is defined as the ratio of the actual flame length to the length of a circular-arc of radius equal to the average radius of the flame. Assuming isotropic distribution of such flame segments we convolute suitable forms of the length-ratio probability distribution functions (pdfs) to arrive at corresponding area-ratio pdfs. Both the pdfs are found to be near log-normally distributed and shows self-similar behavior with increasing radius. Near log-normality and rather intermittent behavior of the flame-length ratio suggests similarity with dissipation rate quantities which stimulates multifractal analysis. Currently at Indian Institute of Science, India.

Automated Serials Control at the Indian Institutes of Technology: An Overview

ERIC Educational Resources Information Center

Ghosh, Tapas Kumar; Panda, K. C.

2011-01-01

Purpose: The purpose of this paper is to highlight the functional attributes of the automated serials control systems of the libraries in seven Indian Institutes of Technology (IITs) and provide a comparative analysis. Design/methodology/approach: Features of the serials control modules of the library management systems (LMSs) in use in the…

Impact of an Environmental Cleaning Intervention on the Presence of Methicillin-Resistant Staphylococcus aureus and Vancomycin-Resistant Enterococci on Surfaces in Intensive Care Unit Rooms

PubMed Central

Goodman, Eric R.; Platt, Richard; Bass, Richard; Onderdonk, Andrew B.; Yokoe, Deborah S.; Huang, Susan S.

2009-01-01

OBJECTIVES To evaluate the adequacy of discharge room cleaning and the impact of a cleaning intervention on the presence of methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE) on environmental surfaces in intensive care unit (ICU) rooms. DESIGN Prospective environmental study. SETTING AND SAMPLE Convenience sample of ICU rooms in an academic hospital. METHODS AND INTERVENTION The intervention consisted of (1) a change from the use of pour bottles to bucket immersion for applying disinfectant to cleaning cloths, (2) an educational campaign, and (3) feedback regarding adequacy of discharge cleaning. Cleaning of 15 surfaces was evaluated by inspecting for removal of a preapplied mark, visible only with an ultraviolet lamp (“black light”). Six surfaces were cultured for MRSA or VRE contamination. Outcomes of mark removal and culture positivity were evaluated by χ2 testing and generalized linear mixed models, clustering by room. RESULTS The black-light mark was removed from 44% of surfaces at baseline, compared with 71% during the intervention (P <.001). The intervention increased the likelihood of removal of black-light marks after discharge cleaning (odds ratio, 4.4; P < .001), controlling for ICU type (medical vs surgical) and type of surface. The intervention reduced the likelihood of an environmental culture positive for MRSA or VRE (proportion of cultures positive, 45% at baseline vs 27% during the intervention; adjusted odds ratio, 0.4; P = .02). Broad, flat surfaces were more likely to be cleaned than were doorknobs and sink or toilet handles. CONCLUSIONS Increasing the volume of disinfectant applied to environmental surfaces, providing education for Environmental Services staff, and instituting feedback with a black-light marker improved cleaning and reduced the frequency of MRSA and VRE contamination. PMID:18624666

Surface modification technologies using concentrated solar radiation

NASA Astrophysics Data System (ADS)

Pitts, J. Roland; Stanley, J. T.; Tracy, Ed; Fields, C. L.

Research conducted at the Solar Energy Research Institute (SERI) during the past three years addressed a number of the critical areas and has explored the possibility of using highly concentrated solar radiation to induce beneficial surface transformation. The principal goal is to develop new coatings and processes that improve the performance and lifetime of materials at reduced processing costs. Highly concentrated radiant energy provides a controllable means of delivering large flux densities to solid surfaces, where the resulting thermal energy can cause phase changes, atomic migrations, and chemical reactions on a surface without greatly perturbing the bulk properties; alternatively, the photons may directly interact with species on the surface. These changes may result in improved properties of the materials by making the surface harder, more resistant to corrosion or wear, thermally resistant, or with lower coefficients of friction. In a solar furnace, this flux can be delivered in large quantities over large areas, or it can be tailored to match the demands of a particular process. Furthermore, this occurs without the environmental liability associated with providing power to more conventional light sources. Recent work at SERI has used fluxes in the range from 100 to 250 w/sq cm for inducing such beneficial surface transformations. Significant results have been obtained in the area of phase transformation hardening of steels and melting powders and preapplied coatings to form fully dense, well-bonded coatings on the surface. New directions in coating technology using highly concentrated solar beams to induce chemical vapor deposition processes are described. Application areas that have not been researched in detail but would appear to be good matches to the solar technology are also reviewed.

Mars Surface Environmental Issues

NASA Technical Reports Server (NTRS)

Charles, John

2002-01-01

Planetary exploration by astronauts will require extended periods of habitation on a planet's surface, under the influence of environmental factors that are different from those of Earth and the spacecraft that delivered the crew to the planet. Human exploration of Mars, a possible near-term planetary objective, can be considered a challenging scenario. Mission scenarios currently under consideration call for surface habitation periods of from 1 to 18 months on even the earliest expeditions. Methods: Environmental issues associated with Mars exploration have been investigated by NASA and the National Space Biomedical Research Institute (NSBRI) as part of the Bioastronautics Critical Path Roadmap Project (see http ://criticalpath.jsc.nasa.gov). Results: Arrival on Mars will immediately expose the crew to gravity only 38% of that at Earth's surface in possibly the first prolonged exposure to gravity other than the 1G of Earth's surface and the zero G of weightless space flight, with yet unknown effects on crew physiology. The radiation at Mars' surface is not well documented, although the planet's bulk and even its thin atmosphere may moderate the influx of galactic cosmic radiation and energetic protons from solar flares. Secondary radiation from activated components of the soil must also be considered. Ultrafine and larger respirable and nonrespirable particles in Martian dust introduced into the habitat after surface excursions may induce pulmonary inflammation exacerbated by the additive reactive and oxidizing nature of the dust. Stringent decontamination cannot eliminate mechanical and corrosive effects of the dust on pressure suits and exposed machinery. The biohazard potential of putative indigenous Martian microorganisms may be assessed by comparison with analog environments on Earth. Even in their absence, human microorganisms, if not properly controlled, can be a threat to the crew's health. Conclusions: Mars' surface offers a substantial challenge to the health and safety of future human explorers.

Organizational "Failure" and Institutional Pluralism: A Case Study of an Urban School Closure

ERIC Educational Resources Information Center

Deeds, Vontrese; Pattillo, Mary

2015-01-01

We use the framework of institutional pluralism to provide new insights into a controversial process of market-based reform-school closures. School closure is a shock that highlights the dynamics and definitions of failure and surfaces values and meanings that might otherwise be hidden from consideration. Using qualitative data from a closing…

Microelectronics Failure Analysis Techniques. A Procedural Guide

DTIC Science & Technology

1980-01-01

Process Control ." Scanning Electron Microscopy/1976, lIT Research Institute, Chicago, Illinois, April 1976, pp. 515-519. 49. Cunningham, R.F. "Sample...Character- ization and Quality Control ." Scanning Electron Microscopy/1977 vol. I, lIT Research Institute, Chicago, Illinois, March 1977, pp. 201-210. 151...reference purposes. Neither the United States Government, the General Electric Company nor the lIT Research Institute warrant the accuracy of this

The 1990-1991 project summaries

NASA Technical Reports Server (NTRS)

1991-01-01

Project summaries for 1990-91 at the Georgia Institute of Technology are presented. The following research projects were studied: a lunar surface vehicle model; lunar loader/transporter; trenching and cable-laying device for the lunar surface; a lunar vehicle system for habitat transport and placement; and lunar storage facility.

Clinical efficacy and safety of surface imaging guided radiosurgery (SIG-RS) in the treatment of benign skull base tumors.

PubMed

Lau, Steven K M; Patel, Kunal; Kim, Teddy; Knipprath, Erik; Kim, Gwe-Ya; Cerviño, Laura I; Lawson, Joshua D; Murphy, Kevin T; Sanghvi, Parag; Carter, Bob S; Chen, Clark C

2017-04-01

Frameless, surface imaging guided radiosurgery (SIG-RS) is a novel platform for stereotactic radiosurgery (SRS) wherein patient positioning is monitored in real-time through infra-red camera tracking of facial topography. Here we describe our initial clinical experience with SIG-RS for the treatment of benign neoplasms of the skull base. We identified 48 patients with benign skull base tumors consecutively treated with SIG-RS at a single institution between 2009 and 2011. Patients were diagnosed with meningioma (n = 22), vestibular schwannoma (n = 20), or nonfunctional pituitary adenoma (n = 6). Local control and treatment-related toxicity were retrospectively assessed. Median follow-up was 65 months (range 61-72 months). Prescription doses were 12-13 Gy in a single fraction (n = 18), 8 Gy × 3 fractions (n = 6), and 5 Gy × 5 fractions (n = 24). Actuarial tumor control rate at 5 years was 98%. No grade ≥3 treatment-related toxicity was observed. Grade ≤2 toxicity was associated with symptomatic lesions (p = 0.049) and single fraction treatment (p = 0.005). SIG-RS for benign skull base tumors produces clinical outcomes comparable to conventional frame-based SRS techniques while enhancing patient comfort.

Novel materials for high-efficiency solar cells

NASA Astrophysics Data System (ADS)

Kojima, Nobuaki; Natori, Masato; Suzuki, Hidetoshi; Inagaki, Makoto; Ohshita, Yoshio; Yamaguchi, Masafumi

2009-08-01

Our Toyota Technological Institute group has investigated various novel materials for solar cells from organic to III-V compound materials. In this paper, we report our recent results in conductivity control of C60 thin films by metal-doping for organic solar cells, and mobility improvement of (In)GaAsN compounds for III-V tandem solar cells. The epitaxial growth of Mg-doped C60 films was attempted. It was found that the epitaxial growth of Mg-doped C60 film was enabled by using mica (001) substrate in the low Mg concentration region (Mg/C60 molar ratio < 1). The crystal quality of the epitaxial Mg-doped C60 film was improved drastically in compared with micro-crystalline film on glass substrate. Such drastic improvement of crystal quality in the epitaxial films resulted significant increase in conductivity. This result may indicate the significant increase of carrier mobility. Crystal quality improvement of CBE-grown GaAsN materials was investigated. We achieved the reduction of residual impurity concentration by chemical reaction control on the growing surface by modifying flow sequence of precursors and by increasing step density on the surface by using a vicinal GaAs substrate. Furthermore, the improvement in carrier mobility was observed, and it was suggested that the reduction of both residual impurities and N-related defects leads this improvement.

Center for Opto-Electronic Systems Research.

DTIC Science & Technology

1988-02-01

Stroud, Jr. The Institute of Optics, University of Rochester Rochester, New York 14627 USA Abstract The Jaynes - Cummings model of a single two-level...surfaces, possibly to include certain classes of surfaces without rotational symmetry. An initial investigation was made of the surface roughness...number density of approximately 1018 - and the forward-going pump wave both enter the nonlinear -.molecules/cm3 . The intensities of the interacting

The physical characteristics of the surface of the satellites and rings of giant planets

NASA Astrophysics Data System (ADS)

Vidmachenko, A. P.; Morozhenko, O. V.

2017-10-01

The book gives the main results of the study of the optical characteristics of the field diffusely reflected radiation and physical characteristics of the surface of the satellites of giant planets and their rings. The publication is intended for teachers of higher educational institutions, students - graduate students and professionals who specialize in experimental physics and astrophysics and solar system surfaces.

The SunCloud project: An initiative for a development of a worldwide sunshine duration and cloudiness observations dataset

NASA Astrophysics Data System (ADS)

Sanchez-Lorenzo, A.

2010-09-01

One problem encountered when establishing the causes of global dimming and brightening is the limited number of long-term solar radiation series with accurate and calibrated measurements. For this reason, the analysis is often supported and extended with the use of other climatic variables such as sunshine duration and cloud cover. Specifically, sunshine duration is defined as the amount of time usually expressed in hours that direct solar radiation exceeds a certain threshold (usually taken at 120 W m-2). Consequently, this variable can be considered as an excellent proxy measure of solar radiation at interannual and decadal time scales, with the advantage that measurements of this variable were initiated in the late 19th century in different, worldwide, main meteorological stations. Nevertheless, detailed and up-to-date analysis of sunshine duration behavior on global or hemispheric scales are still missing. Thus, starting on September 2010 in the framework of different research projects, we will engage a worldwide compilation of the longest daily or monthly sunshine duration series from the late 19th century until present. Several quality control checks and homogenization methods will be applied to the generated sunshine dataset. The relationship between the more precise downward solar radiation series from the Global Energy Balance Archive (GEBA) and the homogenized sunshine series will be studied in order to reconstruct global and regional solar irradiance at the Earth's surface since the late 19th century. Since clouds are the main cause of interannual and decadal variability of radiation reaching the Earth's surface, as a complement to the long-term sunshine series we will also compile worldwide surface cloudiness observations. With this presentation we seek to encourage the climate community to contribute with their own local datasets to the SunCloud project. The SunCloud Team: M. Wild, Institute for Atmospheric and Climate Science, ETH Zurich, Switzerland (martin.wild@env.ethz.ch) E. Pallé, Institute of Astrophysics of the Canary Islands, Spain (epalle@iac.es) J. Calbó, Group of Environmental Physics, University of Girona, Spain (josep.calbo@udg.edu) M. Brunetti, Institute of Atmospheric Sciences and Climate, Italian National Research Council, Italy (m.brunetti@isac.cnr.it) G. Stanhill, Department of Environmental Physics and Irrigation, The Volcani Center, Israel (gerald@volcani.agri.gov.il) R. Brázdil, Institute of Geography, Masaryk University, Czech Republic (brazdil@sci.muni.cz) M. Barriendos, Department of Modern History, University of Barcelona, Spain (mbarriendos@ub.edu) C. Deser, National Center for Atmospheric Research, USA (cdeser@ucar.edu) P. Pereira, Department of Environmental Protection, Vilnius Gediminas Technical University, Lithuania (pereiraub@gmail.com) C. Azorin-Molina, The CEAM Foundation (Fundación Centro de Estudios Ambientales del Mediterráneo), Spain (cazorin@ceam.es) Q. You, Institute of Tibetan Plateau Research, Chinese Academy of Sciences, Beijing, China (yqingl@126.com)

75 FR 71134 - National Institutes of Health

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-22

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health National Cancer Institute; Notice of Closed Meeting Pursuant to section 10(d) of the Federal Advisory Committee Act, as amended (5 U....398, Cancer Research Manpower; 93.399, Cancer Control, National Institutes of Health, HHS) Dated...

Final Rulison Path Forward

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-06-01

The U.S. Department of Energy (DOE) Office of Legacy Management developed this report as a guide for discussions with the Colorado State regulators and other interested stakeholders in response to increased drilling for natural gas reserves near the underground nuclear explosion site at Rulison, Colorado. The Rulison site is located in the Piceance Basin of western Colorado, 40 miles northeast of Grand Junction. The Rulison test was the second natural gas reservoir stimulation experiment in the Plowshare Program, which was designed to develop peaceful uses for nuclear energy. On September 10, 1969, the U.S. Atomic Energy Commission, a predecessor agencymore » of DOE, detonated a 40-kiloton nuclear device 8426 feet below the ground surface in an attempt to release commercially marketable quantities of natural gas. The blast vaporized surrounding rock and formed a cavity about 150 feet in diameter. Although the contaminated materials from drilling operations were subsequently removed from the surface of the blast site, no feasible technology exists to remove subsurface radioactive contamination in or around the test cavity. An increase in drilling for natural gas near the site has raised concern about the possibility of encountering residual radioactivity from the area of the detonation. DOE prohibits drilling in the 40-acre lot surrounding the blast site at a depth below 6000 feet. DOE has no evidence that indicates contamination from the Rulison site detonation has migrated or will ever migrate beyond the 40-acre institutional control boundary. The Colorado Oil and Gas Conservation Commission (COGCC) established two wider boundaries around the site. When a company applies for a permit to drill within a 3-mile radius of surface ground zero, COGCC notifies DOE and provides an opportunity to comment on the application. COGCC also established a half-mile radius around surface ground zero. An application to drill within one-half mile requires a full hearing before the commission. This report outlines DOE's recommendation that gas developers adopt a conservative, staged drilling approach allowing gas reserves near the Rulison site to be recovered in a manner that minimizes the likelihood of encountering contamination. This staged approach calls for collecting data from wells outside the half-mile zone before drilling closer, and then drilling within the half-mile zone in a sequential manner, first at low contamination probability locations and then moving inward. DOE's recommended approach for drilling in this area will protect public safety while allowing collection of additional data to confirm that contamination is contained within the 40-acre institutional control boundary.« less

31 CFR 540.503 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 540.503 Section 540.503 Money and Finance: Treasury Regulations... possession or control of a U.S. financial institution must be blocked in an account on the books of that financial institution. A transfer of funds or credit by a U.S. financial institution between blocked...

Students and Mobile Devices

ERIC Educational Resources Information Center

Traxler, John

2010-01-01

Many educators advocate, promote and encourage the dreams of agency, control, ownership and choice amongst students whilst educational institutions take the responsibility for provision, equity, access, participation and standards. The institutions traditionally procure, provide and control the technology for learning but now students are…

Strategy to Ensure Institutional Control Implementation at Superfund Sites

EPA Pesticide Factsheets

This document sets forth EPA’s strategy (Strategy) for ensuring that institutional controls (ICs) are successfully implemented at Superfund sites, with an emphasis on evaluating ICs at sites where all construction of all remedies is complete (construction complete sites).

49 CFR 26.27 - What efforts must recipients make concerning DBE financial institutions?

Code of Federal Regulations, 2010 CFR

2010-10-01

... financial institutions? 26.27 Section 26.27 Transportation Office of the Secretary of Transportation... efforts must recipients make concerning DBE financial institutions? You must thoroughly investigate the full extent of services offered by financial institutions owned and controlled by socially and...

Infrared ocular thermography in dogs with and without keratoconjunctivitis sicca.

PubMed

Biondi, Flávia; Dornbusch, Peterson T; Sampaio, Manuella; Montiani-Ferreira, Fabiano

2015-01-01

Infrared thermography was used to measure temperature differences of the corneal surface between nasal and temporal limbus regions and central cornea of normal dogs and dogs with keratoconjunctivitis sicca (KCS), in order to establish temperature values in normal canine eyes and in patients with decreased Schirmer tear tests (STT) values. Dogs investigated were all either patients seen at the Veterinary Teaching Hospital of Federal University of Paraná or normal dogs that belonged to the same institution. STT were performed in all eyes. A total of 40 control eyes (STT ≥15 mm/min) and 20 eyes with low STT values (STT ≤14 mm/min) were examined. The mean STT value for eyes with normal STT values was 22.9 ± 3.9 mm/min (mean ± standard deviation), and the mean STT value for eyes with low STT value was 7.2 ± 4.8 mm/min. The mean corneal temperature was significantly lower in eyes with low STT values than in control eyes (P < 0.0001). The following significant correlations were found: (i) Schirmer and breakup time (BUT) (P = 0.0001, r = 0.5); (ii) STT values and corneal surface temperature (P = 0.001, r = 0.256); (iii) STT values and age (P = 0.0001, r = -0.448); (iv) age and corneal surface temperature (P = 0.0001, r = -0.281); and (v) BUT and corneal surface temperature (P = 0.0001, r = 0.36). Thermography is a method that can differentiate between eyes with normal and abnormal STT values. In the future, thermography might be incorporated as part of the ophthalmic examination and perhaps become a popular ancillary test for the diagnoses of ocular surface disorders. © 2013 American College of Veterinary Ophthalmologists.

Protecting surface transportation systems and patrons from terrorist activities : case studies of best security practices and a chronology of attacks

DOT National Transportation Integrated Search

1997-12-01

This report documents the first phase of a continuing research effort carried out by the Norman Y. Mineta International Institute for Surface Transportation Policy Studies (IISTPS) on behalf of the U.S. Department of Transportation. It comprises a ch...

Doppler Spectra of Bistatic Reverberation from the Sea Surface.

DTIC Science & Technology

1979-05-08

GOVT ACCESSIN NO RECIPIENTS8 CATALOG NUMBER S. TtE ... wuw~tP RED DOPPLER .&PECTRA OF JISTATIC REVERBEATION( 9; t - .e:. TROM THE SEA SURFACE...National Resear-h Council, Committee Undersea Warfare 1 Woods Hole Oceanographic Institution 1 NORDA Code 110, 200, 300, 500, 600 5 DDC, Alexandria 12

Controlled human malaria infection trials: How tandems of trust and control construct scientific knowledge.

PubMed

Bijker, Else M; Sauerwein, Robert W; Bijker, Wiebe E

2016-02-01

Controlled human malaria infections are clinical trials in which healthy volunteers are deliberately infected with malaria under controlled conditions. Controlled human malaria infections are complex clinical trials: many different groups and institutions are involved, and several complex technologies are required to function together. This functioning together of technologies, people, and institutions is under special pressure because of potential risks to the volunteers. In this article, the authors use controlled human malaria infections as a strategic research site to study the use of control, the role of trust, and the interactions between trust and control in the construction of scientific knowledge. The authors argue that tandems of trust and control play a central role in the successful execution of clinical trials and the construction of scientific knowledge. More specifically, two aspects of tandems of trust and control will be highlighted: tandems are sites where trust and control coproduce each other, and tandems link the personal, the technical, and the institutional domains. Understanding tandems of trust and control results in setting some agendas for both clinical trial research and science and technology studies.

Contributions to the AIAA Guidance, Navigation and Control Conference

NASA Technical Reports Server (NTRS)

Campbell, S. D. (Editor)

2002-01-01

This report contains six papers presented by the Lincoln Laboratory Air Traffic Control Systems Group at the American Institute of Aeronautics & Astronautics (AIAA) Guidance, Navigation and Control (GNC) conference on 6-9 August 2001 in Montreal, Canada. The work reported was sponsored by the NASA Advanced Air Transportation Technologies (AATT) program and the FAA Free Flight Phase 1 (FFP1) program. The papers are based on studies completed at Lincoln Laboratory in collaboration with staff at NASA Ames Research Center. These papers were presented in the Air Traffic Automation Session of the conference and fall into three major areas: Traffic Analysis & Benefits Studies, Weather/Automation Integration and Surface Surveillance. In the first area, a paper by Andrews & Robinson presents an analysis of the efficiency of runway operations at Dallas/Ft. Worth using a tool called PARO, and a paper by Welch, Andrews & Robinson presents a delay benefit results for the Final Approach Spacing Tool (FAST). In the second area, a paper by Campbell, et al describes a new weather distribution systems for the Center/TRACON Automation System (CTAS) that allows ingestion of multiple weather sources, and a paper by Vandevenne, Lloyd & Hogaboom describes the use of the NOAA Eta model as a backup wind data source for CTAS. Also in this area, a paper by Murphy & Campbell presents initial steps towards integrating weather impacted routes into FAST. In the third area, a paper by Welch, Bussolari and Atkins presents an initial operational concept for using surface surveillance to reduce taxi delays.

Civil-Military Relations in European Security Institutions - Challenges of Multi-Institutionality in Peace Operations

DTIC Science & Technology

2007-03-01

term “The Short Century” was used for the first time by Eric Hobsbawn, in his book The Short Century, written 1994, in which he claims that the...military implementation of the Peace Agreement.”148 147 Richard L. Layton , Command and Control...Richard L. Layton , Command and Control Structure, in Lessons from Bosnia: The IFOR Experience, Larry Wentz ed., (Washington D.C.: Institute for National

Polarised Multiangular Reflectance Measurements Using the Finnish Geodetic Institute Field Goniospectrometer

PubMed Central

Suomalainen, Juha; Hakala, Teemu; Peltoniemi, Jouni; Puttonen, Eetu

2009-01-01

The design, operation, and properties of the Finnish Geodetic Institute Field Goniospectrometer (FIGIFIGO) are presented. FIGIFIGO is a portable instrument for the measurement of surface Bidirectional Reflectance Factor (BRF) for samples with diameters of 10 – 50 cm. A set of polarising optics enable the measurement of linearly polarised BRF over the full solar spectrum (350 – 2,500 nm). FIGIFIGO is designed mainly for field operation using sunlight, but operation in a laboratory environment is also possible. The acquired BRF have an accuracy of 1 – 5% depending on wavelength, sample properties, and measurement conditions. The angles are registered at accuracies better than 2°. During 2004 – 2008, FIGIFIGO has been used in the measurement of over 150 samples, all around northern Europe. The samples concentrate mostly on boreal forest understorey, snow, urban surfaces, and reflectance calibration surfaces. PMID:22412342

A new experimental capability for the study of regolith surface physical properties to support science, space exploration, and in situ resource utilization (ISRU)

NASA Astrophysics Data System (ADS)

Dreyer, Christopher B.; Abbud-Madrid, Angel; Atkinson, Jared; Lampe, Alexander; Markley, Tasha; Williams, Hunter; McDonough, Kara; Canney, Travis; Haines, Joseph

2018-06-01

Many surfaces found on the Moon, asteroids, Mars, moons, and other planetary bodies are covered in a fine granular material known as regolith. Increased knowledge of the physical properties of extraterrestrial regolith surfaces will help advance the scientific knowledge of these bodies as well as the development of exploration (e.g., instrument and robotic) and in situ resource utilization (ISRU) systems. The Center for Space Resources at the Colorado School of Mines as part of the Institute for Modeling Plasma, Atmospheres, and Cosmic Dust of NASA's Solar System Exploration Research Virtual Institute has developed a novel system, called the ISRU Experimental Probe (IEP) that can support studies of dry and icy regolith from -196 to 150 °C and pressure from laboratory ambient pressure to 10-7 Torr. The IEP system and proof-of-concept results are presented in this paper.

Regional climates in the GISS general circulation model: Surface air temperature

NASA Technical Reports Server (NTRS)

Hewitson, Bruce

1994-01-01

One of the more viable research techniques into global climate change for the purpose of understanding the consequent environmental impacts is based on the use of general circulation models (GCMs). However, GCMs are currently unable to reliably predict the regional climate change resulting from global warming, and it is at the regional scale that predictions are required for understanding human and environmental responses. Regional climates in the extratropics are in large part governed by the synoptic-scale circulation and the feasibility of using this interscale relationship is explored to provide a way of moving to grid cell and sub-grid cell scales in the model. The relationships between the daily circulation systems and surface air temperature for points across the continental United States are first developed in a quantitative form using a multivariate index based on principal components analysis (PCA) of the surface circulation. These relationships are then validated by predicting daily temperature using observed circulation and comparing the predicted values with the observed temperatures. The relationships predict surface temperature accurately over the major portion of the country in winter, and for half the country in summer. These relationships are then applied to the surface synoptic circulation of the Goddard Institute for Space Studies (GISS) GCM control run, and a set of surface grid cell temperatures are generated. These temperatures, based on the larger-scale validated circulation, may now be used with greater confidence at the regional scale. The generated temperatures are compared to those of the model and show that the model has regional errors of up to 10 C in individual grid cells.

75 FR 64728 - Cooperative Operating Philosophy-Serving the Members of Farm Credit System Institutions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... System (System) institutions are required to operate.\\1\\ The FCA emphasizes cooperative principles by... the management, control, and ownership of their institutions.\\2\\ The FCA also emphasizes cooperative principles in the examination function and Financial Institution Rating System (FIRS) used to categorize the...

An Introduction to the Cost of Engineering and Institutional Controls at Brownfield Properties

EPA Pesticide Factsheets

This fact sheet introduces and explores the costs of site cleanup and, where cleanup leaves site contamination that restricts reuse, outlines the engineering and institutional controls and their monitoring and maintenance costs over a longer time frame.

Nanofabrication with Pulsed Lasers

PubMed Central

2010-01-01

An overview of pulsed laser-assisted methods for nanofabrication, which are currently developed in our Institute (LP3), is presented. The methods compass a variety of possibilities for material nanostructuring offered by laser–matter interactions and imply either the nanostructuring of the laser-illuminated surface itself, as in cases of direct laser ablation or laser plasma-assisted treatment of semiconductors to form light-absorbing and light-emitting nano-architectures, as well as periodic nanoarrays, or laser-assisted production of nanoclusters and their controlled growth in gaseous or liquid medium to form nanostructured films or colloidal nanoparticles. Nanomaterials synthesized by laser-assisted methods have a variety of unique properties, not reproducible by any other route, and are of importance for photovoltaics, optoelectronics, biological sensing, imaging and therapeutics. PMID:20672069

Remotely manned systems: Exploration and operation in space; Proceedings of the First National Conference, California Institute of Technology, Pasadena, Calif., September 13-15, 1972.

NASA Technical Reports Server (NTRS)

Heer, E.

1973-01-01

Free-flying teleoperator systems are discussed, giving attention to earth-orbit mission considerations and Space Tug requirements, free-flying teleoperator requirements and conceptual design, system requirements for a free-flying teleoperator to despin, and the experimental evaluation of remote manipulator systems. Shuttle-Attached Manipulator Systems are considered, together with remote surface vehicle systems, manipulator systems technology, remote sensor and display technology, the man-machine interface, and control and machine intelligence. Nonspace applications are also explored, taking into account implications of nonspace applications, naval applications of remote manipulators, and hand tools and mechanical accessories for a deep submersible. Individual items are announced in this issue.

Risk assessment in infrastructure in educational institution: A study in Malaysia

NASA Astrophysics Data System (ADS)

Rasdan Ismail, Ahmad; Adilah Hamzah, Noor; Kamilah Makhtar, Nor; Azhar Mat Daud, Khairul; Zulkarnaen Khidzir, Nik; Husna Che Hassan, Nurul; Arifpin Mansor, Muhamad

2017-10-01

This particular study was conducted to assess the hazard exposure in education institution and to highlight the possible risk level available. The assessment utilised is Hazard Identification, Risk Assessment and Risk Control (HIRARC). There was a 2008’s form in order to determine the risk level of the hazard. There were over 111 of education institutions were selected around Malaysia to perform this assessment. Area chosen for each institution was office, playing field, canteen, classroom, toilet and drainage. By referring HIRARC Guideline 2008, the determination of risk rank is measure based on the formula likelihood multiply severity and the rank need to refer from risk matrix standard. There are several hazard have be found and shows the high, medium and low of risk level. The higher level of risk was discussed in the study which is hazard found in playing field and hazard in office. There several hazard that need to be control by education management to avoid increase of case accident in Education Sector, Malaysia. As conclusion, the exposure hazard among the staff and educators is high and further action and control are needed. Further study need to explore the best recommendation for control measure of the hazard exposed by education institution.

SPECIAL ISSUE DEVOTED TO THE 25th ANNIVERSARY OF THE A.M. PROKHOROV GENERAL PHYSICS INSTITUTE: High-speed ablation of ultradeep channels by a phase-conjugate dynamically controlled passively Q-switched Nd:YAG laser

NASA Astrophysics Data System (ADS)

Basiev, T. T.; Garnov, S. V.; Klimentov, S. M.; Pivovarov, P. A.; Gavrilov, A. V.; Smetanin, S. N.; Solokhin, S. A.; Fedin, A. V.

2007-10-01

Parameters of high-speed ablation of ultradeep channels by controlled pulse trains from a single-mode phase-conjugate dynamic cavity Nd:YAG laser emitting 20-200-ns, 70-250-mJ pulses at a pulse repetition rate in a train of 40-250 kHz are studied. The optimal parameters of ablation are found, for which a long-lived region of a hot rarefied gas was maintained in the ultradeep channel, which suppressed the shielding action of the surface plasma. The control of the lasing process during ablation optimises not only the heating and plasma formation, but also the removal of the processed material in the pause between laser pulses. Adaptive regulation of lasing parameters during ablation made it possible to obtain ultradeep channels of length 8-27 mm and diameters 80-300 μm of the input and output holes in metals (aluminium, steel and Inconel 718 nickel superalloy) and ultrahard ceramics (Al2O3, AlN, SiC).

Tele-Supervised Adaptive Ocean Sensor Fleet

NASA Technical Reports Server (NTRS)

Lefes, Alberto; Podnar, Gregg W.; Dolan, John M.; Hosler, Jeffrey C.; Ames, Troy J.

2009-01-01

The Tele-supervised Adaptive Ocean Sensor Fleet (TAOSF) is a multi-robot science exploration architecture and system that uses a group of robotic boats (the Ocean-Atmosphere Sensor Integration System, or OASIS) to enable in-situ study of ocean surface and subsurface characteristics and the dynamics of such ocean phenomena as coastal pollutants, oil spills, hurricanes, or harmful algal blooms (HABs). The OASIS boats are extended- deployment, autonomous ocean surface vehicles. The TAOSF architecture provides an integrated approach to multi-vehicle coordination and sliding human-vehicle autonomy. One feature of TAOSF is the adaptive re-planning of the activities of the OASIS vessels based on sensor input ( smart sensing) and sensorial coordination among multiple assets. The architecture also incorporates Web-based communications that permit control of the assets over long distances and the sharing of data with remote experts. Autonomous hazard and assistance detection allows the automatic identification of hazards that require human intervention to ensure the safety and integrity of the robotic vehicles, or of science data that require human interpretation and response. Also, the architecture is designed for science analysis of acquired data in order to perform an initial onboard assessment of the presence of specific science signatures of immediate interest. TAOSF integrates and extends five subsystems developed by the participating institutions: Emergent Space Tech - nol ogies, Wallops Flight Facility, NASA s Goddard Space Flight Center (GSFC), Carnegie Mellon University, and Jet Propulsion Laboratory (JPL). The OASIS Autonomous Surface Vehicle (ASV) system, which includes the vessels as well as the land-based control and communications infrastructure developed for them, controls the hardware of each platform (sensors, actuators, etc.), and also provides a low-level waypoint navigation capability. The Multi-Platform Simulation Environment from GSFC is a surrogate for the OASIS ASV system and allows for independent development and testing of higher-level software components. The Platform Communicator acts as a proxy for both actual and simulated platforms. It translates platform-independent messages from the higher control systems to the device-dependent communication protocols. This enables the higher-level control systems to interact identically with heterogeneous actual or simulated platforms.

Knowledge-driven institutional change: an empirical study on combating desertification in northern China from 1949 to 2004.

PubMed

Yang, Lihua; Wu, Jianguo

2012-11-15

Understanding institutional changes is crucial for environmental management. Here we investigated how institutional changes influenced the process and result of desertification control in northern China between 1949 and 2004. Our analysis was based on a case study of 21 field sites and a meta-analysis of additional 29 sites reported in the literature. Our results show that imposed knowledge-driven institutional change was often perceived as a more progressive, scientific, and rational type of institutional change by entrepreneurs, scholars, experts, and technicians, while voluntary, knowledge-driven institutional change based on indigenous knowledge and experiences of local populations was discouraged. Our findings also demonstrate that eight working rules of imposed knowledge-driven institutional change can be applied to control desertification effectively. These rules address the issues of perception of potential gains, entrepreneurs' appeals and support, coordination of multiple goals, collaboration among multiple organizations, interest distribution and conflict resolution, incremental institutional change, external intervention, and coordination among the myriad institutions involved. Imposed knowledge-driven institutional change tended to be more successful when these rules were thoroughly implemented. These findings provide an outline for implementing future institutional changes and policy making to combat desertification and other types of ecological and environmental management. Copyright © 2012 Elsevier Ltd. All rights reserved.

Safety Control and Safety Education at Technical Institutes

NASA Astrophysics Data System (ADS)

Iino, Hiroshi

The importance of safety education for students at technical institutes is emphasized on three grounds including safety of all working members and students in their education, research and other activities. The Kanazawa Institute of Technology re-organized the safety organization into a line structure and improved safety minds of all their members and now has a chemical materials control system and a set of compulsory safety education programs for their students, although many problems still remain.

Screening and characterization of Staphylococcus aureus from ophthalmology clinic surfaces: a proposed surveillance tool

PubMed Central

Reem, Rachel E.; Van Balen, Joany; Hoet, Armando E.; Cebulla, Colleen M.

2014-01-01

Purpose To screen environmental surfaces of an outpatient ophthalmic clinic for methicillin-susceptible and methicillin-resistant Staphylococcus aureus (MSSA and MRSA); to identify the most commonly contaminated surfaces; and to phenotype and genotype all collected isolates Design A single institution, one-year prospective environmental study Methods Commonly touched surfaces from examination rooms and common areas were targeted and sampled on a quarterly basis for one year. Samples were collected using electrostatic cloths and swabs. S. aureus was isolated using non-selective and selective media. Morphological characteristics and standard biological testing were used to confirm staphylococcal species. S. aureus isolates were phenotypically (Kirby-Bauer method) and genotypically characterized (mecA confirmation, SCCmec typing and pulsed-field gel electrophoresis). Dendrogram analysis was used to establish genetic relatedness between the isolates. Results Of 112 total samples, 27 (24%) and 5 (4%) were MSSA- and MRSA-positive, respectively. Both community-associated (SCCmec IV, USA300) and hospital-associated (SCCmec II, USA100) MRSA isolates were found. No single surface remained consistently positive with the same isolate over time and molecular analysis demonstrated high levels of diversity among isolates. Doorknobs, slit-lamp head/chinrests, and computer keyboards were frequently contaminated. Conclusions The proposed surveillance protocol successfully allowed the detection of both MSSA and MRSA contaminating important high-touch surfaces in a representative ophthalmology clinic. Frequently contaminated surfaces must be targeted for routine cleaning and disinfection as a there is a constant introduction of clones over time. Hence, other clinics may consider implementing and adapting surveillance tools, as the one here described, to help them control these important nosocomial pathogens. PMID:24412125

International Low-Earth-Orbit Spacecraft Materials Test Program Initiated for Better Prediction of Durability and Performance

NASA Technical Reports Server (NTRS)

Rutledge, Sharon K.

1999-01-01

Spacecraft in low Earth orbit (LEO) are subjected to many components of the environment, which can cause them to degrade much more rapidly than intended and greatly shorten their functional life. The atomic oxygen, ultraviolet radiation, and cross contamination present in LEO can affect sensitive surfaces such as thermal control paints, multilayer insulation, solar array surfaces, and optical surfaces. The LEO Spacecraft Materials Test (LEO-SMT) program is being conducted to assess the effects of simulated LEO exposure on current spacecraft materials to increase understanding of LEO degradation processes as well as to enable the prediction of in-space performance and durability. Using ground-based simulation facilities to test the durability of materials currently flying in LEO will allow researchers to compare the degradation evidenced in the ground-based facilities with that evidenced on orbit. This will allow refinement of ground laboratory test systems and the development of algorithms to predict the durability and performance of new materials in LEO from ground test results. Accurate predictions based on ground tests could reduce development costs and increase reliability. The wide variety of national and international materials being tested represent materials being functionally used on spacecraft in LEO. The more varied the types of materials tested, the greater the probability that researchers will develop and validate predictive models for spacecraft long-term performance and durability. Organizations that are currently participating in the program are ITT Research Institute (USA), Lockheed Martin (USA), MAP (France), SOREQ Nuclear Research Center (Israel), TNO Institute of Applied Physics (The Netherlands), and UBE Industries, Ltd. (Japan). These represent some of the major suppliers of thermal control and sensor materials currently flying in LEO. The participants provide materials that are exposed to selected levels of atomic oxygen, vacuum ultraviolet radiation, contamination, or synergistic combined environments at the NASA Lewis Research Center. Changes in characteristics that could affect mission performance or lifetime are then measured. These characteristics include changes in mass, solar absorptance, and thermal emittance. The durability of spacecraft materials from U.S. suppliers is then compared with those of materials from other participating countries. Lewis will develop and validate performance and durability prediction models using this ground data and available space data. NASA welcomes the opportunity to consider additional international participants in this program, which should greatly aid future spacecraft designers as they select materials for LEO missions.

Evaluation of the Anaheim Advanced Traffic Control System Field Operational Test : Task B : assessment of institutional issues

DOT National Transportation Integrated Search

1999-07-01

This report provides an overview of the technical and institutional issues associated with the : evaluation of the federally-sponsored Anaheim Advanced Traffic Control System Field Operations Test. The primary FOT objective was the implementation and...

78 FR 12065 - National Institute for Occupational Safety and Health Personal Protective Technology for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention National Institute for Occupational Safety and Health Personal Protective Technology for Pesticide Handlers... for Disease Control and Prevention (CDC), Department of Health and Human Services (HHS). ACTION...

A new computer-controlled multi-channel high voltage supply system for GRACE instrumentation

NASA Astrophysics Data System (ADS)

Manna, A.; Chakrabarti, S.; Mukhopadhayay, P. K.

2002-03-01

The high energy gamma ray telescopes being set up by the Bhabha Atomic Research Institute Centre (BARC) at Mt. Abu, Rajasthan, as part of the GRACE project, require a very large number (~ 1000) of programmable high voltage power supplies for biasing photomultiplier tubes for the detection and characterization of the atmospheric Cerenkov events. These HV supplies need to be very compact, lightweight and rugged, as they will be mounted on the base of the moving telescope. This paper describes the design aspects of the overall HV system and the performance of the prototype HV modules developed for such applications. In the new design, the inverter switching frequency of the HV supplies has been increased threefold as compared to the earlier design, and surface mounted devices have been used to achieve overall size and weight reductions. The system consists of multiple HV modules, each containing 16 independently programmable HV supplies. Each HV module has an on-board micro-controller for doing control and supervisory functions and is interconnected via a serial 12C bus. The HV supplies have built in over voltage/current, thermal overload protections with output voltage readback and adjustable slew rate control facilities.

Modeling driver stop/run behavior at the onset of a yellow indication considering driver run tendency and roadway surface conditions.

PubMed

Elhenawy, Mohammed; Jahangiri, Arash; Rakha, Hesham A; El-Shawarby, Ihab

2015-10-01

The ability to model driver stop/run behavior at signalized intersections considering the roadway surface condition is critical in the design of advanced driver assistance systems. Such systems can reduce intersection crashes and fatalities by predicting driver stop/run behavior. The research presented in this paper uses data collected from two controlled field experiments on the Smart Road at the Virginia Tech Transportation Institute (VTTI) to model driver stop/run behavior at the onset of a yellow indication for different roadway surface conditions. The paper offers two contributions. First, it introduces a new predictor related to driver aggressiveness and demonstrates that this measure enhances the modeling of driver stop/run behavior. Second, it applies well-known artificial intelligence techniques including: adaptive boosting (AdaBoost), random forest, and support vector machine (SVM) algorithms as well as traditional logistic regression techniques on the data in order to develop a model that can be used by traffic signal controllers to predict driver stop/run decisions in a connected vehicle environment. The research demonstrates that by adding the proposed driver aggressiveness predictor to the model, there is a statistically significant increase in the model accuracy. Moreover the false alarm rate is significantly reduced but this reduction is not statistically significant. The study demonstrates that, for the subject data, the SVM machine learning algorithm performs the best in terms of optimum classification accuracy and false positive rates. However, the SVM model produces the best performance in terms of the classification accuracy only. Copyright © 2015 Elsevier Ltd. All rights reserved.

Laboratory study of hyper-elocity impact-driven chemical reactions and surface evolution in icy targets.

NASA Astrophysics Data System (ADS)

Ulibarri, Z.; Munsat, T.; Dee, R.; Horanyi, M.; James, D.; Kempf, S.; Nagle, M.; Sternovsky, Z.

2017-12-01

Although ice is prevalent in the solar system and the long-term evolution of many airless icy bodies is affected by hypervelocity micrometeoroid bombardment, there has been little experimental investigation into these impact phenomena, especially at the impact speeds encountered in space. For example, there is little direct information about how dust impacts alter the local chemistry, and dust impacts may be an important mechanism for creating complex organic molecules necessary for life. Laser ablation and light-gas gun experiments simulating dust impacts have successfully created amino acid precursors from base components in ice surfaces. Additionally, the Cassini mission revealed CO2 deposits in icy satellites of Saturn, which may have been created by dust impacts. With the creation of a cryogenically cooled ice target for the dust accelerator facility at the NASA SSERVI-funded Institute for Modeling Plasma, Atmospheres, and Cosmic Dust (IMPACT), it is now possible to study the effects of micrometeoroid impacts in a controlled environment under conditions and at energies typically encountered in nature. Complex ice-target mixtures are created with a flash-freezing target which allows for homogeneous mixtures to be frozen in place even with salt mixtures that otherwise would form inhomogeneous ice surfaces. Coupled with the distinctive capabilities of the IMPACT dust facility, highly valuable data concerning the evolution of icy bodies under hypervelocity bombardment and the genesis of complex organic chemistry on these icy bodies can be gathered in unique and tightly controlled experiments. Results from recent and ongoing investigations will be presented.

Gastroesophageal reflux is not associated with dental erosion in children.

PubMed

Wild, Yvette K; Heyman, Melvin B; Vittinghoff, Eric; Dalal, Deepal H; Wojcicki, Janet M; Clark, Ann L; Rechmann, Beate; Rechmann, Peter

2011-11-01

Dental erosion is a complication of gastroesophageal reflux (GER) in adults; in children, it is not clear if GER has a role in dental pathologic conditions. Dietary intake, oral hygiene, high bacterial load, and decreased salivary flow might contribute independently to GER development or dental erosion, but their potential involvement in dental erosion from GER is not understood. We investigated the prevalence of dental erosion among children with and without GER symptoms, and whether salivary flow rate or bacterial load contribute to location-specific dental erosion. We performed a cross-sectional study of 59 children (ages, 9-17 y) with symptoms of GER and 20 asymptomatic children (controls); all completed a questionnaire on dietary exposure. Permanent teeth were examined for erosion into dentin, erosion locations, and affected surfaces. The dentist was not aware of GER status, and the gastroenterologist was not aware of dental status. Stimulated salivary flow was measured and salivary bacterial load was calculated for total bacteria, Streptococcus mutans, and Lactobacilli. Controlling for age, dietary intake, and oral hygiene, there was no association between GER symptoms and dental erosion by tooth location or affected surface. Salivary flow did not correlate with GER symptoms or erosion. Erosion location and surface were independent of total bacteria and levels of Streptococcus mutans and Lactobacilli. Location-specific dental erosion is not associated with GER, salivary flow, or bacterial load. Prospective studies are required to determine the pathogenesis of GER-associated dental erosion and the relationship between dental caries to GER and dental erosion. Copyright © 2011 AGA Institute. Published by Elsevier Inc. All rights reserved.

Assessments of the quality of randomized controlled trials published in International Journal of Urology from 1994 to 2011.

PubMed

Cho, Hee Ju; Chung, Jae Hoon; Jo, Jung Ki; Kang, Dong Hyuk; Cho, Jeong Man; Yoo, Tag Keun; Lee, Seung Wook

2013-12-01

Randomized controlled trials are one of the most reliable resources for assessing the effectiveness and safety of medical treatments. Low quality randomized controlled trials carry a large bias that can ultimately impair the reliability of their conclusions. The present study aimed to evaluate the quality of randomized controlled trials published in International Journal of Urology by using multiple quality assessment tools. Randomized controlled trials articles published in International Journal of Urology were found using the PubMed MEDLINE database, and qualitative analysis was carried out with three distinct assessment tools: the Jadad scale, the van Tulder scale and the Cochrane Collaboration Risk of Bias Tool. The quality of randomized controlled trials was analyzed by publication year, type of subjects, intervention, presence of funding and whether an institutional review board reviewed the study. A total of 68 randomized controlled trial articles were published among a total of 1399 original articles in International Journal of Urology. Among these randomized controlled trials, 10 (2.70%) were from 1994 to 1999, 23 (4.10%) were from 2000 to 2005 and 35 (4.00%) were from 2006 to 2011 (P = 0.494). On the assessment with the Jadad and van Tulder scale, the numbers and percentage of high quality randomized controlled trials increased over time. The studies that had institutional review board reviews, funding resources or that were carried out in multiple institutions had an increased percentage of high quality articles. The numbers and percentage of high-quality randomized controlled trials published in International Journal of Urology have increased over time. Furthermore, randomized controlled trials with funding resources, institutional review board reviews or carried out in multiple institutions have been found to be of higher quality compared with others not presenting these features. © 2013 The Japanese Urological Association.

Equity in Educational Land Grant Status Act of 1993. Hearing on S. 1345 To Provide Land-Grant Status for Tribally Controlled Community Colleges, Tribally Controlled Postsecondary Vocational Institutions, the Institute of American Indian and Alaska Native Culture and Arts Development, Southwest Indian Polytechnic Institute, and Haskell Indian Junior College, before the Committee on Indian Affairs. United States Senate, One Hundred Third Congress, First Session (November 18, 1993).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Indian Affairs.

A Senate committee hearing received testimony on the Equity in Educational Land Grant Status Act, which would extend land-grant status and concomitant federal aid to 29 Indian tribal colleges and postsecondary institutions. Senators and representatives of the National Association of State Universities and Land Grant Colleges, Navajo Community…

Information Security Issues in Higher Education and Institutional Research

ERIC Educational Resources Information Center

Custer, William L.

2010-01-01

Information security threats to educational institutions and their data assets have worsened significantly over the past few years. The rich data stores of institutional research are especially vulnerable, and threats from security breaches represent no small risk. New genres of threat require new kinds of controls if the institution is to prevent…

76 FR 67469 - Eunice Kennedy Shriver National Institute of Child Health & Human Development; Notice of Closed...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... National Institute of Child Health & Human Development; Notice of Closed Meeting Pursuant to section 10(d... Institute of Child Health and Human Development Special Emphasis Panel, Molecular and Cellular Controls of... Review, Eunice Kennedy Shriver National Institute of Child Health and Human Development, NIH, 6100...

A Moving Tale

ERIC Educational Resources Information Center

Science Teacher, 2005

2005-01-01

Massachusetts Institute of Technology (MIT) mathematicians have discovered how certain insects can climb what to them are steep, slippery slopes in the water's surface without moving their limbs, and do it at high speed. Welcome to the world of the tiny creatures that live on the surface of ponds, lakes, and other standing bodies of water. For the…

Upper-Ocean Processed Under the Stratus Cloud Deck in the Southeast Pacific Ocean

DTIC Science & Technology

2010-01-19

based on Woods Hole Oceano - graphic Institution (WHOI) Improved Meteorological (IMET) buoy observations at 20°S, 85°W. Net surface heat fluxes are...Jason-1 and Jason-2 sea surface heights and geostrophic currents (computed from absolute topography) produced by Segment Sol Multimissions d’Altimetrie

Surface Operations Simulator and Scheduler (SOSS) Presentation

NASA Technical Reports Server (NTRS)

Zhu, Zhifan

2016-01-01

NASA - KAIA (Korea Agency for Infrastructure Technology Advancement) - KARI (Korea Aerospace Research Institute) collaboration surface air traffic management research has been ongoing since May 2015. In the first year collaboration, NASA's SOSS software has been transferred to KAIA and KARI teams to provide fast time simulation capability. Incheon International Airport model has been developed for SOSS.

Influence of the Institutional Structure of Surface Water Rights on Agricultural Production in the Central Valley

NASA Astrophysics Data System (ADS)

Nelson, K.; Burchfield, E. K.

2017-12-01

California's Central Valley region is one of the most productive agricultural systems on the planet. The high levels of agricultural production in this region require large amounts of fresh water for irrigation. However, the long-term availability of water required to sustain such levels of agricultural production has been questioned following the latest drought in California. In this study, we use Bayesian multilevel spatiotemporal modeling techniques to examine the influence of the institutional structure of surface water rights in the Central Valley on agricultural production during the recent drought. The R-INLA package is employed to account for spatial processes that have the potential to influence the effects of water right structures on crop productivity as well as on extent of cultivation. Model results suggest that seniority in surface water access significantly improves crop productivity on cultivated lands, but does not directly affect the ability to maintain cultivated extent. In addition, results suggest that areas with more junior surface water rights tend to reduce extent of cultivation, but maintain crop productivity, as cumulative drought stress increases.

Containing the Damage: Quality Control of Local Data Production.

ERIC Educational Resources Information Center

Blair, Norman A.

1983-01-01

The ability of operating departments of an institution to mechanically gather, summarize, and report "local" data is discussed. Problems are outlined that arise when departments have the ability to produce data and do so with rigorous quality control by the institution's central information management organization. (MLW)

Higher Education Financial Statistics, 1981-82.

ERIC Educational Resources Information Center

Hottinger, Gerald W.

Statistical data on Pennsylvania higher education finance for 1981-1982 are presented. Tables provide the following information: current-funds revenues by institutional control, 1972-1973 through 1981-1982; percent of current-funds revenues by source, 1972-1973 through 1981-1982; current-funds expenditures by institutional control, 1972-1973…

New Cancer Prevention and Control Central Institutional Review Board Established | Division of Cancer Prevention

Cancer.gov

The NCI Central Institutional Review Board (CIRB) Initiative announced the establishment of the Cancer Prevention and Control (CPC) CIRB January 14, extending the benefits of centralized review to investigators participating in clinical trials sponsored by the Division of Cancer Prevention (DCP). |

44 CFR 19.205 - Educational institutions and other entities controlled by religious organizations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Educational institutions and other entities controlled by religious organizations. 19.205 Section 19.205 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY GENERAL NONDISCRIMINATION ON...

Institutional Controls and Transfer of Real Property under CERCLA Section 120(h)(3)(A), (B) or (C)

EPA Pesticide Factsheets

This document provides guidance to the EPA on the exercise of EPA's discretion under CERCLA section 120(h)(3)(A),(B), or (C) when EPA is called upon to evaluate institutional controls as part of a remedial action.

Power, Agency and Middle Leadership in English Primary Schools

ERIC Educational Resources Information Center

Hammersley-Fletcher, Linda; Strain, Michael

2011-01-01

English primary schools are considered quasi-collegial institutions within which staff communicate regularly and openly. The activities of staff, however, are bound by institutional norms and conditions and by societal expectations. Wider agendas of governmental control over the curriculum and external controls to ensure accountability and…

DARPA Internet Program. Internet and Transmission Control Specifications,

DTIC Science & Technology

1981-09-01

Internet Program Protocol Specification", RFC 791, USC/ Information Sciences Institute, September 1981. [34] Postel, J., ed., "Transmission Control Protocol...DARPA Internet Program Protocol Specification", RFC 793, USC/ Information Sciences Institute, September 1981. [35] Postel, J., "Echo Process", RFC 347...Newman, March 1981. [53] Postel, J., " Internet Control Message Protocol - DARPA Internet Program Protocol Specification", RFC 792, USC/ Information

Albuquerque Regional Training: The Third Seminar on Surface Metrology for the Americas May 12-13 2014

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tran, Sophie M; Tran, Hy D.

The Third Seminar on Surface Metrology for the Americas (SSMA) took place in Albuquerque, New Mexico May 12-13, 2014. The conference was at the Marriott Hotel, in the heart of Albuquerque Uptown, within walking distance of many fantastic restaurants. Why surface metrology? Ask Professor Chris Brown of Worcester Polytechnic Institute (WPI), the chair of the first two SSMAs in 2011 and 2012 and the chair of the ASME B46 committee on classification and designation of surface qualities, and Professor Brown responds: “Because surfaces cover everything.”

What Determines Faculty-Engaged Scholarship?

ERIC Educational Resources Information Center

Vogelgesang, Lori J.; Denson, Nida; Jayakumar, Uma M.

2010-01-01

This paper examines how faculty and institutional characteristics shape engaged scholarship. Controlling for faculty dispositions, disciplinary differences, and institutional characteristics, the authors examined the impact of perceived institutional support for community partnerships, community-based research, and teaching on faculty engagement.…

The Unmanned Research Airplane Facility at the Cyprus Institute: Advanced Atmospheric Observations

NASA Astrophysics Data System (ADS)

Lange, Manfred A.; Argyrides, Marios; Ioannou, Stelios; Keleshis, Christos

2014-05-01

Unmanned Aerial Systems (UASs) have been established as versatile tools for different applications, providing data and observations for atmospheric and Earth-Systems research. They provide an urgently needed link between in-situ ground based measurements and satellite remote sensing observations and are distinguished by significant versatility, flexibility and moderate operational costs. Building on an earlier project (Autonomous Flying Platforms for Atmospheric and Earth Surface Observations project; APAESO) of the Energy, Environment and Water Research Center (EEWRC) at the Cyprus Institute (APAESO is co-financed by the European Development Fund and the Republic of Cyprus through the Cyprus Research Promotion Foundation), we have built up an Unmanned Research Aircraft Facility at The Cyprus Institute (CyI-URAF). The basic components of this facility comprise four CRUISERS airplanes (ET-Air, Slovakia) as UAS platforms, a substantial range of scientific instruments to be flown on these platforms, a mobile Ground Control Station and a well-equipped workshop and calibration laboratory. The APAESO platforms are suitable to carrying out atmospheric and earth-surface observations in the (Eastern) Mediterranean (and elsewhere). They enable 3D measurements for determining physical, chemical and radiative atmospheric properties, aerosol and dust concentrations and atmospheric dynamics as well as 2D investigations into land management practices, vegetation and agricultural mapping, contaminant detection and the monitoring and assessment of hydrological parameters and processes of a given region at high spatial resolution. We will report on some of the essential modifications of the platforms and some of the instrumentation that were instrumental in preparing the research airplanes for a variety of collaborative research projects with. The first scientific mission involved the employment of a DOAS-system (Differential Optical Absorption Spectroscopy) in cooperation with colleagues from Heidelberg and Mainz, Germany and test flights that have been successfully completed. We also engaged in a new research project aimed at measuring vertical profiles of aerosols in the Eastern Mediterranean. This is being achieved in field campaigns employing an innovative aerosol sampler in close collaboration with colleagues from the University of Frankfurt, Germany as well as with colleagues from the Universities of Tel Aviv and the Weizmann Institute (Israel). More recently, we have started to prepare our platforms to carry out research missions in the context of the newly funded EU-BACCHUS project.

The selection of air traffic control specialists. I., History and review of contributions by the Civil Aeromedical Institute.

DOT National Transportation Integrated Search

1980-06-01

For two decades the FAA Civil Aeromedical Institute (CAMI) has engaged in active research programs exploring most aspects of the problems of effectively selecting air traffic control specialists (ATCSs) for the FAA. The results of those efforts have ...

78 FR 12788 - Certain Electronic Bark Control Collars; Notice of Institution of Investigation; Institution of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-25

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-870] Certain Electronic Bark Control... AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint and a motion for temporary relief were filed with the U.S. International Trade Commission on...

34 CFR 410.1 - What is the Tribally Controlled Postsecondary Vocational Institutions Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the Tribally Controlled Postsecondary Vocational Institutions Program? 410.1 Section 410.1 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION TRIBALLY...

7 CFR 15a.12 - Educational institutions controlled by religious organizations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false Educational institutions controlled by religious organizations. 15a.12 Section 15a.12 Agriculture Office of the Secretary of Agriculture EDUCATION PROGRAMS OR ACTIVITIES RECEIVING OR BENEFITTING FROM FEDERAL FINANCIAL ASSISTANCE Coverage § 15a.12 Educational...

Outsourcing University Degrees: Implications for Quality Control

ERIC Educational Resources Information Center

Edwards, Julie; Crosling, Glenda; Edwards, Ron

2010-01-01

Education institutions worldwide have and continue to seek opportunities to spread their offerings abroad. While the provision of courses to students located overseas through partner institutions has many advantages, it raises questions about quality control that are not as applicable to other forms of international education. This paper uses a…

42 CFR 37.10 - Standards incorporated by reference.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Department, Medical Physics Publishing, 4513 Vernon Blvd., Madison, WI 53705, http://www.aapm.org/pubs... Automatic Exposure Control Devices, published by the American Institute of Physics for AAPM, January 1985... Institute of Physics, July 1990, into § 37.44(g). (4) AAPM Report No. 74, Quality Control in Diagnostic...

42 CFR 37.10 - Standards incorporated by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Department, Medical Physics Publishing, 4513 Vernon Blvd., Madison, WI 53705, http://www.aapm.org/pubs... Automatic Exposure Control Devices, published by the American Institute of Physics for AAPM, January 1985... Institute of Physics, July 1990, into § 37.44(g). (4) AAPM Report No. 74, Quality Control in Diagnostic...

Industrial and Institutional Pest Control. Sale Publication 4073.

ERIC Educational Resources Information Center

Wamsley, Mary Ann, Ed.; Vermeire, Donna M., Ed.

This guide gives information needed to meet Environmental Protection Agency standards on industrial and institutional pest control, and to help prepare for certification. It gives descriptions and pictures of general insect pests, parasitic pests of man, occasional invaders, wood-destroying pests, stored product pests, vertebrates, and weeds. The…

Prevention and control practices for human noroviruses in long-term care facilities in South Carolina.

PubMed

Leone, Cortney M; Jayasekara, Lalani; Sharp, Julia; Fraser, Angela

2015-12-01

Long-term care facilities (LTCFs) are the most common setting for human norovirus (HuNoV) outbreak. Our study aimed to determine gaps in prevention and control practices for HuNoV in LTCFs in South Carolina (SC). Two researchers visited a convenience sample of 26 LTCFs in SC during July-November 2013. Directors were interviewed to determine facility prevention and control practices. Relative frequencies and means were calculated using SAS 9.3 (SAS Institute, Cary, NC). Most directors had little knowledge of proper sanitizing and disinfecting products and reported missing written procedures for cleaning staff-visitor bathrooms. Only 18 had recommendations for when residents should wash hands. Many used the wrong products for pathogen removal after vomit-fecal events, had no written procedures for cleaning contaminated soft surfaces, did not remove other individuals during clean-up of vomit-fecal episodes, and did not clean a large area surrounding vomit-fecal episodes. Eighteen did not assign specific staff to care for sick; 16 did not designate specific toilets for sick; and 15 did not restrict visitors during an outbreak. Directors' responses indicated gaps in prevention and control practices for HuNoV in LTCFs in SC. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Interim Land Use Control Implementation Plan

NASA Technical Reports Server (NTRS)

Applegate, Joseph L.

2014-01-01

This Interim Land Use Control Implementation Plan (LUCIP) has been prepared to inform current and potential future users of the Kennedy Space Center (KSC) Contractors Road Heavy Equipment (CRHE) Area (SWMU 055; "the Site") of institutional controls that have been implemented at the Site1. Although there are no current unacceptable risks to human health or the environment associated with the CRHE Area, an interim institutional land use control (LUC) is necessary to prevent human health exposure to volatile organic compound (VOC)-affected groundwater at the Site. Controls will include periodic inspection, condition certification, and agency notification.

Policy options for prevention: the case of alcohol.

PubMed

Toomey, T L; Wagenaar, A C

1999-01-01

Reducing the availability of alcohol through alcohol control policies such as excise taxes and the minimum legal drinking age has been effective in reducing a wide range of alcohol-related problems, including traffic crashes, liver cirrhosis, and violence. Alcohol control policies may be classified into two overlapping categories--public and institutional policies. Some policies such as alcohol server training may be either mandated by governmental jurisdictions or voluntarily adopted by individual institutions, which include alcohol retail establishments, other businesses, worksites, schools, colleges/universities, law enforcement agencies, religious institutions, insurance agencies, and alcohol producers. Public policies may be mandated by national, state/provincial, or local governments to regulate where, when, and how alcohol is sold and consumed. This paper describes the wide array of public and institutional policies available to reduce alcohol-related problems. Summaries of research evaluating specific alcohol control policies are provided when available.

[Study thought of pharmaceutical preparations quality standards by dynamic quality control technology].

PubMed

Yu, Dan-Hong; Mao, Chen-Mei; Lv, Cheng-Zhe; Jin, Hui-Zhen; Yao, Xin; Jia, Xiao-Bin

2014-07-01

Pharmaceutical preparations, particularly as a "secret recipe" of traditional Chinese medicine in medical institutions, are the product of China's medical and health industry, and they are also an important means of competing of different medical institutions. Although pharmaceutical preparations have advantages and characteristics than institutes for drug and pharmaceutical companies, the quality standards of pharmaceutical preparations in medical institutions has not reached the desired level over the years. As we all know, the quality of pharmaceutical preparations is important to ensure the efficacy, especially under the environment of people pay more sttention on drug safety and effectiveness and contry increase emphasis on the stste of pharmaceutical preparations. In view of this, we will improve the grade, stability, and clinical efficacy of pharmaceutical preparations by the advanced equipment, testing instruments and the process dynamic quality control technology. Finally, we hope we can provide new ideas for the quality control of pharmaceutical preparations.

R-Index Measure of Microencapsulated Tributyrin in Gamma-Cyclodextrin Influenced by Drying Method.

PubMed

Donovan, Joseph D; Lee, Soo-Yeun; Lee, Youngsoo

2016-09-01

Microencapsulation is commonly used in the food industry for a variety of purposes including added ingredient functionally and taste-masking for those ingredients with negative sensory qualities. Tributyrin (TB), a source intestinally-essential butyric acid, possesses negative aroma (cheesy, fecal) and taste (bitter) qualities. This has significantly limited its use in food applications for the potential improvement of intestinal health. Utilizing spray drying and low-temperature oven drying, microcapsules containing TB were produced using whey (WPI), WPI and inulin, and gamma-cyclodextrin (GCD). To determine how microcapsule formulation and drying method affected the perception of TB relative to a control, microencapsulated and free TB were added to an infant formula system and evaluated using the rating method to determine R-index measures. Pooled R-index measures (α = 0.01, 2-tailed, and n = 170) indicated that the only microcapsule not significantly different from the control (R-index below 57.95%) was the GCD and TB oven dried (GCT OD) microcapsule. All other WPI, WPI-inulin, and GCD and TB spray-dried (GCT SD) microcapsules were all significantly different from the control. Average individual R-index results indicated that all microcapsules in infant formula, except for GCT OD, were significantly different (P < 0.01) from the control formula but not from free TB. Spray drying may create microcapsules with surface TB and disturb the GCD-TB complex, allowing free, and surface TB to be perceived by the panelists. The GCT OD microcapsule has the potential to be used for the potential oral treatment of intestinal disorders in functional food applications without the negative sensory qualities of TB. © 2016 Institute of Food Technologists®

Incorporating Phage Therapy into WPI Dip Coatings for Applications on Fresh Whole and Cut Fruit and Vegetable Surfaces.

PubMed

Vonasek, Erica L; Choi, Angela H; Sanchez, Juan; Nitin, Nitin

2018-06-15

There is a significant unmet need to develop antimicrobial solutions to reduce the risk of contamination in fresh produce. Bacteriophages have been proposed as a potential approach for controlling foodborne pathogens. This study evaluated the combination of edible dip coatings with T7 bacteriophages on whole and cut produce. The evaluation includes an assessment of phage loading, phage storage stability, antimicrobial activity, and phage stability during simulated gastric digestion on sliced cucumbers, sliced apples, and whole cherry tomatoes. In this evaluation, phages coated on fresh produce using edible whey protein isolate (WPI) were compared with phages coated from an aqueous suspension (control coating). The results demonstrated that WPI coatings load more phages than the control and enhanced phage stability during cold storage (4 °C) for cut apples and whole cherry tomatoes. Phage stability decreased by 1 to 3 log(PFU) in a simulated gastric environment. Phage antimicrobial activity against Escherichia coli BL21 decreased 2 to 4 log(CFU) of bacteria on cut apples and whole cherry tomatoes, while no significant bacterial reduction was observed for sliced cucumbers. Overall, the results show that WPI dip coating provides phage loading, stability, and antimicrobial activity to produce surfaces compared to the control coating, and thus may be considered an effective approach for extending phage therapy on fresh produce. The practical application is to prevent bacterial cross contamination of fresh produce by using a combination of edible coating with bacteriophages. The results demonstrate enhanced loading and stability of phages on fresh produce when used in combination with an edible coating. © 2018 Institute of Food Technologists®.

31 CFR 586.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 586.504 Section 586.504 Money and Finance: Treasury Regulations.... financial institutions. Any payment of funds or transfer of credit in which any person whose property and... or control of a U.S. financial institution, must be blocked in an account on the books of that...

31 CFR 548.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 548.504 Section 548.504 Money and Finance: Treasury Regulations... Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or transfer....201(a) has any interest that comes within the possession or control of a U.S. financial institution...

31 CFR 598.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 598.504 Section 598.504 Money and Finance: Treasury Regulations... Policy § 598.504 Payments and transfers to blocked accounts in U.S. financial institutions. Any payment... that comes within the possession or control of a U.S. financial institution must be blocked in an...

31 CFR 551.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 551.504 Section 551.504 Money and Finance: Treasury Regulations... Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or transfer....201 has any interest that comes within the possession or control of a U.S. financial institution must...

31 CFR 546.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 546.504 Section 546.504 Money and Finance: Treasury Regulations... Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or transfer....201(a) has any interest that comes within the possession or control of a U.S. financial institution...

31 CFR 541.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 541.504 Section 541.504 Money and Finance: Treasury Regulations... Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or transfer...(a) has any interest, that comes within the possession or control of a U.S. financial institution...

31 CFR 537.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 537.504 Section 537.504 Money and Finance: Treasury Regulations... Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or transfer...(a) has any interest, that comes within the possession or control of a U.S. financial institution...

31 CFR 543.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 543.504 Section 543.504 Money and Finance: Treasury Regulations....504 Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or....201(a) has any interest that comes within the possession or control of a U.S. financial institution...

31 CFR 542.504 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 542.504 Section 542.504 Money and Finance: Treasury Regulations... Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or transfer...(a) has any interest, that comes within the possession or control of a U.S. financial institution...

31 CFR 538.503 - Payments and transfers to blocked accounts in U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounts in U.S. financial institutions. 538.503 Section 538.503 Money and Finance: Treasury Regulations... Payments and transfers to blocked accounts in U.S. financial institutions. Any payment of funds or transfer... control of a U.S. financial institution, must be blocked in an account on the books of that financial...

76 FR 26310 - National Cancer Institute; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-06

... Support; 93.398, Cancer Research Manpower; 93.399, Cancer Control, National Institutes of Health, HHS... personal privacy. Name of Committee: National Cancer Institute Special Emphasis Panel, Population-based Research Optimizing Screening through Personalized Regimens (PROSPR) for Cancer and Statistical...

12 CFR 5.20 - Organizing a bank.

Code of Federal Regulations, 2012 CFR

2012-01-01

...). (5) Lead depository institution means the largest depository institution controlled by a bank holding... have a history of responsibility, personal honesty, and integrity. Personal wealth is not a... bank holding company whose lead depository institution is an eligible bank or eligible depository...

Gap Analysis for Chinese Drug Control Institutes to Achieve the Standards of World Health Organization Medicine Prequalification.

PubMed

Mao, Xin; Yang, Yue

2017-02-01

The study aims to explore the challenges and the gaps faced by Chinese Drug Control Institutes in achieving the standards of World Health Organization (WHO) Medicine Prequalification. The study was undertaken with 6 Provincial Drug Control Institutes in China from November 2012 to November 2013. The study assessed key elements required to comply with WHO Good Practices for Pharmaceutical Quality Control Laboratories (GPPQCL). For GPPQCL, the study found gaps in quality management system, control of documentation, data-processing equipment, premises and equipment, contracts, reagents (water), reference substances and reference materials, calibration, verification of performance and qualification of equipment, instruments and other devices, analytical worksheet, evaluation of test results, personnel, and validation of analytical procedures. The study indicates that gaps are attributed to differences between the standards of Chinese Accreditation Standards and WHO-GPPQCL. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

An integrated strategy for aircraft/airport noise abatement: A legal-institutional control act section 7 to the noise control act of 1972 and proposals based thereon

NASA Technical Reports Server (NTRS)

Mayo, L. H.

1975-01-01

The development of the aircraft noise control structure since the Griggs case of 1962 was examined. The Noise Control Act of 1972 is described which undertook to establish the legal-institutional framework within which an adequate aircraft/airport noise abatement program might be initiated with concern for full recognition of all the beneficial and detrimental consequences of air transportation and appropriate distribution of benefits and costs.

[Hygiene and Infection Prevention in Medical Institutions, Kindergartens and Schools - Statutory Basis, Infection Control Practice and Experiences of the Public Health Services].

PubMed

Heudorf, U

2015-07-01

Infection prevention is one of the main tasks of the public health services. The "Protection against infection act" places all medical institutions and facilities for children (kindergartens and schools) under the obligation to assume responsibility and to cooperate. Duties of the institutions are described, and public health services are obliged to perform hygiene control visits.Regarding medical institutions, the guidelines of the German Commission on Hospital Hygiene and Infection Control have to be observed, and the counties were obliged to publish hygiene enactments. Subsequently, good improvements in hygiene management in medical institutions were achieved. In schools, however, severe hygienic problems (i.e. sanitary hygiene, indoor air hygiene) are detected, without any improvement - obviously due to a missing sense of responsibility in the school community. Causes for poor behaviour prevention (hand hygiene, ventilation) and missing situational prevention (i.e. cleaning) are discussed. Without reversion to the obviously needed but nearly forgotten subject school hygiene, obligatory guidelines and the assuming of responsibility, permanent improvements cannot be achieved. © Georg Thieme Verlag KG Stuttgart · New York.

FY04 NDCEE Annual Technologies Publications

DTIC Science & Technology

2006-03-14

Crane Division, Indiana Naval Surface Warfare Center, Indian Head Division (IHDiv), Maryland Navy Ammunition Program Office New Jersey Institute of...full-scale field demonstrations • Coordinated literature reviews, data requests, and telephone interviews with Naval Surface Warfare Center, Crane ...Armored Recon ABN Assault Vehicle, Bridge Launcher Armored Vehicle, Carrier Ammunition, Crane Shovel 20-ton, Hammer Pile Drivers, and Howitzers. Points of

FY04 NDCEE Annual Technologies Publication

DTIC Science & Technology

2006-03-14

Crane Division, Indiana Naval Surface Warfare Center, Indian Head Division (IHDiv), Maryland Navy Ammunition Program Office New Jersey Institute of...full-scale field demonstrations • Coordinated literature reviews, data requests, and telephone interviews with Naval Surface Warfare Center, Crane ...Armored Recon ABN Assault Vehicle, Bridge Launcher Armored Vehicle, Carrier Ammunition, Crane Shovel 20-ton, Hammer Pile Drivers, and Howitzers. Points of

Dust control by air-blocking shelves and dust collector-to-bailing airflow ratios for a surface mine drill shroud

PubMed Central

Zheng, Y.; Reed, W.R.; Potts, J.D.; Li, M.; Rider, J.P.

2018-01-01

The National Institute for Occupational Safety and Health (NIOSH) recently developed a series of validated models utilizing computational fluid dynamics (CFD) to study the effects of air-blocking shelves on airflows and respirable dust distribution associated with medium-sized surface blasthole drill shrouds as part of a dry dust collector system. Using validated CFD models, three different air-blocking shelves were included in the present study: a 15.2-cm (6-in.)-wide shelf; a 7.6-cm (3-in.)-wide shelf; and a 7.6-cm (3-in.)-wide shelf at four different shelf heights. In addition, the dust-collector-to-bailing airflow ratios of 1.75:1, 1.5:1, 1.25:1 and 1:1 were evaluated for the 15.2-cm (6-in.)-wide air-blocking shelf. This paper describes the methodology used to develop the CFD models. The effects of air-blocking shelves and dust collector-to-bailing airflow ratios were identified by the study, and problem regions were revealed under certain conditions.

Test research of Surface Electromagnetic Prospecting (SEP) System in Yang-jia-zhang-zi of Liao Ning province

NASA Astrophysics Data System (ADS)

Di, Q.

2013-12-01

In recent years, deep prospecting method such as magnetotelluric and controlled source audio-frequency magnetotelluric develop rapidly, but the instruments almost monopolized by several big geophysical companies from the United States, Canada and Germany. From prospecting practice, foreign equipment adaptation on complicated geological conditions in China is unsatisfactory. As increasing of national strength, electromagnetic exploration system development independently is on the agenda. In the year of 2010, the institute of geology and geophysics, Chinese academy of sciences, took on one subject of the SinoProbe project, the research of surface Electromagnetic Prospecting (SEP) System, and has achieved some achievements. SEP is an independent research instrumentation system, which is available for MT, AMT and CSAMT soundings. After laboratory testing, in order to test SEP's performance in field, the yang-jia-zhang-zi molybdenum deposit area is selected for SEP experiment. All modules and components of SEP system have been tested, and the field ability of the whole system also has been tested. The experimental results show that SEP performance has reached the level of commercial instruments.

Effect of Autologous Serum Eye Drops in Patients with Sjögren Syndrome-related Dry Eye: Clinical and In Vivo Confocal Microscopy Evaluation of the Ocular Surface.

PubMed

Semeraro, Francesco; Forbice, Eliana; Nascimbeni, Giuseppe; Taglietti, Marco; Romano, Vito; Guerra, Germano; Costagliola, Ciro

To evaluate in vivo changes after therapy using autologous serum (AS) eye drops in Sjögren's syndrome (SS)-related dry eyes by confocal microscopy. In this study, 24 patients with SS-related dry eyes [12 in AS eye drop therapy and 12 in artificial tear (AT) therapy] and 24 healthy volunteers were recruited. Ocular Surface Disease Index (OSDI), central corneal thickness, tear film, break-up time, corneal and conjunctival staining, Schirmer's test and corneal confocal microscopy were investigated. Tear production, tear stability, corneal staining, inflammation, and central corneal thickness, Langherans cells, activated keratocytes, intermediate epithelial cell density, nerve tortuosity, number of sub-basal nerve branches, and number of bead-like formations differed between patients and controls (p<0.0001). The AT and AS groups differed in the OSDI, number of branches, and number of beadings (p<0.0001). AS eye drops improve symptoms and confocal microscopy findings in SS-related dry eyes. Copyright © 2016 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

Tribology in secondary wood machining

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ko, P.L.; Hawthorne, H.M.; Andiappan, J.

Secondary wood manufacturing covers a wide range of products from furniture, cabinets, doors and windows, to musical instruments. Many of these are now mass produced in sophisticated, high speed numerical controlled machines. The performance and the reliability of the tools are key to an efficient and economical manufacturing process as well as to the quality of the finished products. A program concerned with three aspects of tribology of wood machining, namely, tool wear, tool-wood friction characteristics and wood surface quality characterization, was set up in the Integrated Manufacturing Technologies Institute (IMTI) of the National Research Council of Canada. The studiesmore » include friction and wear mechanism identification and modeling, wear performance of surface-engineered tool materials, friction-induced vibration and cutting efficiency, and the influence of wear and friction on finished products. This research program underlines the importance of tribology in secondary wood manufacturing and at the same time adds new challenges to tribology research since wood is a complex, heterogeneous, material and its behavior during machining is highly sensitive to the surrounding environments and to the moisture content in the work piece.« less

Qualification tests for {sup 192}Ir sealed sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iancso, Georgeta, E-mail: georgetaiancso@yahoo.com; Iliescu, Elena, E-mail: georgetaiancso@yahoo.com; Iancu, Rodica, E-mail: georgetaiancso@yahoo.com

This paper describes the results of qualification tests for {sup 192}Ir sealed sources, available in Testing and Nuclear Expertise Laboratory of National Institute for Physics and Nuclear Engineering 'Horia Hulubei' (I.F.I.N.-HH), Romania. These sources had to be produced in I.F.I.N.-HH and were tested in order to obtain the authorization from The National Commission for Nuclear Activities Control (CNCAN). The sources are used for gammagraphy procedures or in gammadefectoscopy equipments. Tests, measurement methods and equipments used, comply with CNCAN, AIEA and International Quality Standards and regulations. The qualification tests are: 1. Radiological tests and measurements: dose equivalent rate at 1 m;more » tightness; dose equivalent rate at the surface of the transport and storage container; external unfixed contamination of the container surface. 2. Mechanical and climatic tests: thermal shock; external pressure; mechanic shock; vibrations; boring; thermal conditions for storage and transportation. Passing all tests, it was obtained the Radiological Security Authorization for producing the {sup 192}Ir sealed sources. Now IFIN-HH can meet many demands for this sealed sources, as the only manufacturer in Romania.« less

Transplantation of free tibial periosteal grafts for the repair of articular cartilage defect: An experimental study

PubMed Central

Singh, Ravijot; Chauhan, Vijendra; Chauhan, Neena; Sharma, Sansar

2009-01-01

Background: Articular chondrocytes have got a long lifespan but rarely divides after maturity. Thus, an articular cartilage has a limited capacity for repair. Periosteal grafts have chondrogenic potential and have been used to repair defects in the articular cartilage. The purpose of the present study is to investigate the differentiation of free periosteal grafts in the patellofemoral joint where the cambium layer faces the subchondral bone and to investigate the applicability of periosteal grafts in the reconstruction of articular surfaces. Materials and Methods: The study was carried out over a period of 1 year on 25 adult, male Indian rabbits after obtaining permission from the institutional animal ethical committee. A full-thickness osteochondral defect was created by shaving off the whole articular cartilage of the patella of the left knee. The defect thus created was grafted with free periosteal graft. The patella of the right knee was taken as a control where no grafting was done after shaving off the articular cartilage. The first animal was used to study the normal histology of the patellar articular cartilage and periosteum obtained from the medial surface of tibial condyle. Rest 24 animals were subjected to patellectomy, 4 each at serial intervals of 2, 4, 8, 16, 32 and 48 weeks and the patellar articular surfaces were examined macroscopically and histologically. Results: The grafts got adherent to the underlying patellar articular surface at the end of 4 weeks. Microscopically, graft incorporation could be appreciated at 4 weeks. Mesenchymal cells of the cambium layer were seen differentiating into chondrocytes by the end of 4 weeks in four grafts (100%) and they were arranged in a haphazard manner. Till the end of 8 weeks, the cellular arrangement was mostly wooly. At 16 weeks, one graft (25%) had wooly arrangement of chondrocytes and three grafts (75%) had columnar formation of cells. Same percentage was maintained at 32 weeks. Four grafts (100%) at 48 weeks showed columnar orientation. The control side showed no changes over the shaved off articular surface in all the rabbits. One rabbit at 4 weeks had a dislocation of the patella on the control side. None of the rabbits developed any infection or wound dehiscence. Conclusion: Autologous periosteal graft transplantation can be a promising substitute for articular cartilaginous defects. PMID:19838382

Analysis of Water Vapour Flux Between Alpine Wetlands Underlying the Surface and Atmosphere in the Source Region of the Yellow River

NASA Astrophysics Data System (ADS)

Xie, Y.; Wen, J.; Liu, R.; Wang, X.; JIA, D.

2017-12-01

Wetland underlying surface is sensitive to climate change. Analysis of the degree of coupling between wetlands and the atmosphere and a quantitative assessment of how environmental factors influence latent heat flux have considerable scientific significance. Previous studies, which focused on the forest, grassland and farmland ecosystems, lack research on the alpine wetlands. In addition, research on the environmental control mechanism of latent heat flux is still qualitative and lacks quantitative evaluations and calculations. Using data from the observational tests of the Maduo Observatory of Climate and Environment of the Northwest Institute of Eco-Environment and Resource, CAS, from June 1 to August 31, 2014, this study analysed the time-varying characteristics and causes of the degree of coupling between alpine wetlands underlying surface and the atmosphere and quantitatively calculated the influences of different environmental factors (solar radiation and vapour pressure deficit) on latent heat flux. The results were as follows: Due to the diurnal variations of solar radiation and wind speed, the diurnal variations of the Ω factor present a trend in which the Ω factor are small in the morning and large in the evening. Due to the vegetation growing cycle, the seasonal variations of the Ω factor present a reverse "U" trend . These trends are similar to the diurnal and seasonal variations of the absolute control exercised by solar radiation over the latent heat flux. This conforms to omega theory. The values for average absolute atmospheric factor (surface factor or total ) control exercised by solar radiation and water vapour pressure are 0.20 (0.02 or 0.22 ) and 0.005 (-0.07 or -0.06) W·m-2·Pa-1, respectively.. Generally speaking, solar radiation and water vapour pressure deficit exert opposite forces on the latent heat flux. The average Ω factor is high during the vegetation growing season, with a value of 0.38, and the degree of coupling between the alpine wetland surface and the atmosphere system is low. The actual measurements agree with omega theory. The latent heat flux is mainly influenced by solar radiation. From the above, our study has provided reference information for exploring the influences of environmental factors on the latent heat flux over the alpine wetlands of the Yellow River source region.

Level-Set Simulation of Viscous Free Surface Flow Around a Commercial Hull Form

DTIC Science & Technology

2005-04-15

Abstract The viscous free surface flow around a 3600 TEU KRISO Container Ship is computed using the finite volume based multi-block RANS code, WAVIS...developed at KRISO . The free surface is captured with the Level-set method and the realizable k-ε model is employed for turbulence closure. The...computations are done for a 3600 TEU container ship of Korea Research Institute of Ships & Ocean Engineering, KORDI (hereafter, KRISO ) selected as

NREL Solar Radiation Research Laboratory (SRRL): Baseline Measurement System (BMS); Golden, Colorado (Data)

DOE Data Explorer

Stoffel, T.; Andreas, A.

1981-07-15

The SRRL was established at the Solar Energy Research Institute (now NREL) in 1981 to provide continuous measurements of the solar resources, outdoor calibrations of pyranometers and pyrheliometers, and to characterize commercially available instrumentation. The SRRL is an outdoor laboratory located on South Table Mountain, a mesa providing excellent solar access throughout the year, overlooking Denver. Beginning with the basic measurements of global horizontal irradiance, direct normal irradiance and diffuse horizontal irradiance at 5-minute intervals, the SRRL Baseline Measurement System now produces more than 130 data elements at 1-min intervals that are available from the Measurement & Instrumentation Data Center Web site. Data sources include global horizontal, direct normal, diffuse horizontal (from shadowband and tracking disk), global on tilted surfaces, reflected solar irradiance, ultraviolet, infrared (upwelling and downwelling), photometric and spectral radiometers, sky imagery, and surface meteorological conditions (temperature, relative humidity, barometric pressure, precipitation, snow cover, wind speed and direction at multiple levels). Data quality control and assessment include daily instrument maintenance (M-F) with automated data quality control based on real-time examinations of redundant instrumentation and internal consistency checks using NREL's SERI-QC methodology. Operators are notified of equipment problems by automatic e-mail messages generated by the data acquisition and processing system. Radiometers are recalibrated at least annually with reference instruments traceable to the World Radiometric Reference (WRR).

Characterization of a Hyperspectral Chromotomographic Imaging Ground System

DTIC Science & Technology

2012-03-22

developed by the Air Force Institute of Technology (AFIT). The optical model is constructed using Zemax and MATLAB. The model provides the mechanism required...can also be used to incorporate interferometric measurements of optical components and model them in Zemax. The model uses a Zernike Phase Surface to...THE AIR FORCE AIR UNIVERSITY AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio DISTRIBUTION STATEMENT A APPROVED FOR PUBLIC

Solution Spraying of Poly(methyl methacrylate) Blends to Fabricate Micro-textured, Superoleophobic Surfaces (PREPRINT)

DTIC Science & Technology

2011-01-01

S. Chhatre a , Joseph M. Mabry b , Robert E. Cohen a and Gareth H. McKinley c a Department of Chemical Engineering , Massachusetts Institute of...Department of Mechanical Engineering , Massachusetts Institute of Technology, Cambridge 02139 Corresponding Authors: Tel.: (617) 253-3777 (R.E.C.); (617...the morphological properties, is of interest in a number of applications including sensors, filtration, drug release, tissue engineering scaffolds

Commercial Pesticides Applicator Manual: Industrial, Institutional, Structural and Health Related.

ERIC Educational Resources Information Center

Fitzwater, William D.; Renes, Robert

This training manual provides information needed to meet the minimum EPA standards for certification as a commercial applicator of pesticides in the industrial, institutional, structural and health related pest control category. The text discusses the use and safety of applying pesticides to control invertebrate and vertebrate pests such as ants,…

Comparison of performance on the Shipley Institute of Living Scale, air traffic control specialist selection test, and FAA Academy screen.

DOT National Transportation Integrated Search

1992-11-01

This study was conducted to establish norms for ATCS personnel on a group test of intellectual functioning, the Shipley Institute of Living Scale (SILS), to screen subjects for future research on the effects of Air Traffic Control Specialist (ATCS) r...

McGee Creek Drainage and Levee District, Illinois.

DTIC Science & Technology

1973-04-01

J COUNTY MC GEE REEK DRAINAGE BLEVEE DISTRICT N~ i, 0. ~ I I LEGEND Co ,. 3 ~ . -~------~----EXISTING LEVEE _____________PROPOSED LEVEE...Development, Conservation, Environmental Protection Agency, Health, Institute for Environmental Quality, Mines and Minerals. Pollution Control Board...Protection Agency, Health, Institute for Environmental Quality, Mines and Minerals, Pollution Control Board, Registration and Education, Transportation

76 FR 61227 - Agricultural Bioterrorism Protection Act of 2002; Biennial Review and Republication of the Select...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-03

... adjudicated as a mental defective, alien, committed to any mental institution, controlled substance, crime..., mental institution, restricted person, and unlawful user of any controlled substance. We believe that... aware of the Supreme Court's decision in Small v. United States, 544 US 385 (2005) in which the court...

Are Non-Church Controlled Educational Institutions Still Entitled to Title VII Religious Exemptions?

ERIC Educational Resources Information Center

Mawdsley, Ralph D.

1994-01-01

In "Kamehameha," the Ninth Circuit Court of Appeals found that the schools were covered by none of the exemptions permitting employment discrimination on religious grounds. The decision has the potential to cause difficulties for religious educational institutions that are not church controlled but desire to impose religious requirements…

42 CFR 84.43 - Quality control records; review by the Institute; revocation of approval.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Quality control records; review by the Institute; revocation of approval. 84.43 Section 84.43 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY...

42 CFR 84.43 - Quality control records; review by the Institute; revocation of approval.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Quality control records; review by the Institute; revocation of approval. 84.43 Section 84.43 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY...

42 CFR 84.43 - Quality control records; review by the Institute; revocation of approval.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Quality control records; review by the Institute; revocation of approval. 84.43 Section 84.43 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY...

42 CFR 84.43 - Quality control records; review by the Institute; revocation of approval.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Quality control records; review by the Institute; revocation of approval. 84.43 Section 84.43 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY...

42 CFR 84.43 - Quality control records; review by the Institute; revocation of approval.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Quality control records; review by the Institute; revocation of approval. 84.43 Section 84.43 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY...

17 CFR 240.16a-1 - Definition of terms.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (15 U.S.C. 80a-30; (x) A non-U.S. institution that is the functional equivalent of any of the... applicable to the equivalent U.S. institution and the non-U.S. institution is eligible to file a Schedule 13G... such institutions or persons without the purpose or effect of changing or influencing control of the...

17 CFR 240.16a-1 - Definition of terms.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (15 U.S.C. 80a-30; (x) A non-U.S. institution that is the functional equivalent of any of the... applicable to the equivalent U.S. institution and the non-U.S. institution is eligible to file a Schedule 13G... such institutions or persons without the purpose or effect of changing or influencing control of the...

17 CFR 240.16a-1 - Definition of terms.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (15 U.S.C. 80a-30; (x) A non-U.S. institution that is the functional equivalent of any of the... applicable to the equivalent U.S. institution and the non-U.S. institution is eligible to file a Schedule 13G... such institutions or persons without the purpose or effect of changing or influencing control of the...

34 CFR 600.31 - Change in ownership resulting in a change in control for private nonprofit, private for-profit...

Code of Federal Regulations, 2011 CFR

2011-07-01

...— (i) No later than 10 business days after the change occurs; or (ii) For an institution owned by a publicly-traded corporation, no later than 10 business days after the institution knew, or should have... institution of higher education or postsecondary vocational institution, it need not have been in existence...

34 CFR 600.31 - Change in ownership resulting in a change in control for private nonprofit, private for-profit...

Code of Federal Regulations, 2010 CFR

2010-07-01

...— (i) No later than 10 business days after the change occurs; or (ii) For an institution owned by a publicly-traded corporation, no later than 10 business days after the institution knew, or should have... institution of higher education or postsecondary vocational institution, it need not have been in existence...

Recovery of vancomycin-resistant enterococci on fingertips and environmental surfaces.

PubMed

Noskin, G A; Stosor, V; Cooper, I; Peterson, L R

1995-10-01

To determine the recovery of vancomycin-resistant enterococci (VRE) on fingertips, gloved fingertips, and environmental surfaces commonly encountered in the healthcare setting, and to examine the importance of handwashing on the removal of these organisms. Two clinical isolates of VRE (Enterococcus faecalis and Enterococcus faecium) were inoculated onto the hands of healthy human volunteers and the following environmental surfaces: countertops, bedrails, telephones, and stethoscopes. Following inoculation, samples were obtained at various time intervals to determine rates of recovery of organisms. To evaluate the effects of handwashing on enterococcal recovery, two different soap preparations were tested. Hands were washed with water alone or with one of the soaps and water. The soap and water studies were performed with a 5-second and a 30-second wash. Both enterococcal strains survived for at least 60 minutes on gloved and ungloved fingertips. The E faecalis was recoverable from countertops for 5 days; the E faecium persisted for 7 days. For bedrails, both enterococcal species survived for 24 hours without significant reduction in colony counts. The bacteria persisted for 60 minutes on the telephone handpiece and for 30 minutes on the diaphragmatic surface of the stethoscope. A 5-second wash with water alone resulted in virtually no change in recovery of enterococci; a 30-second wash with water plus either soap was necessary to eradicate the bacteria from hands completely. VRE are capable of prolonged survival on hands, gloves, and environmental surfaces. Hands should be washed thoroughly and gloves removed following contact with patients infected or colonized with these multidrug-resistant bacteria. Finally, environmental surfaces may serve as potential reservoirs for nosocomial transmission of VRE and need to be considered when formulating institutional infection control policies.

Application of Several Techniques for Prohibiting Fouling in Li-Recovery Pilot Plant

NASA Astrophysics Data System (ADS)

Yoon, H.; Kim, D.; Gong, M.; Kim, B.; Chung, K.

2010-12-01

The problem of marine organisms adhering to any surfaces exposed in seawater is as old as time. Marine fouling is a major problem in the materials used in seawater worldwide. Marine coatings contain elements such as copper and triorganotin compounds were often used as an effective compound for control the fouling problem, but application of such coatings containing triorganotin compounds was prohibited and the former are considered undesirable because of its toxicity and accumulative in non-target organisms. Monitoring and field studies regarding fouling problems during operation of Li-recovery pilot plant which is designed by the Korea Institute of Geoscience & Mineral Resources (KIGAM) were major concern of this study. Fouling could be the most troublesome tasks during the development of a large scale pilot production test for achieving a high performance adsorbent for seawater dissolved Li recovery. Chemical and microbiological characteristics of the fouling biofilms developed on various surfaces in contact with the seawater were made. The microbial compositions of the biofilm consortia formed on the reservoir polymer surfaces were also tested for. The quantities of the diverse microorganisms in the biofilm samples developed on the prohibiting polymer reservoir surface were larger when there was no concern about materials for special selection for fouling. The experimental results offered new specific information, concerning the problems in the application of new material as well as surface coating such as anti-fouling coatings. They showed the important role microbial activity in fouling and corrosion of the surfaces in contact with the any seawater. Acknowledgements: This research was supported by a grant from the Development of Technology for Extraction of Resources Dissolved in Sea Water Program funded by Ministry of Land Transport and Maritime Affairs in Korean Government (2010).

Differences in the use of outsourcing in public and private institutions providing medical services.

PubMed

Czerw, Aleksandra I; Kowalska, Mariola; Religioni, Urszula

2014-06-29

The costs of health care in Poland are continuously increasing. Thus, almost every institution providing medical services aims at their limitation. One of the costs rationalisation methods in the health care sector is outsourcing. The study was conducted in 153 randomly selected institutions providing medical activities. The tool was a questionnaire, available via a web browser. Over 30% of public institutions identified the need for financial savings, as the main reason for outsourcing the cleaning function. Among private institutions, the dominant reason for this is too high maintenance cost of the cleaning staff (less than 40% of responses). The huge number of medical institutions use the services of an external company for laundering. Over 30% of public institutions identified as the most common reason for separation of functions laundering lack of resources to upgrade and modernize facilities. Less than 27% of public institutions indicate too high costs of kitchen staff as the main reason for ordering function of feeding. Another reason is the need for financial savings (22% response rate). Some institutions indicate a desire to focus on key areas (20% of responses) and lack of financial resources to upgrade and modernize the kitchen (20% response rate). Public and private institutions exercise control over the quality and method performed by an external service (71% of public institutions and 59% of private institutions). Private institutions often informally exercise external control (difference confirmed - Fisher's exact test). Less than 90% of public institutions indicated satisfaction with the services provided by external companies. The adaptation of outsourcing in medical facilities leads to financial efficiency improvement. Through the separation of some medical functions and entrusting their realisation to external companies, medical institutions can focus on their basic activity that is the provision of health services.

The role of local sea surface temperature pattern changes in shaping climate change in the North Atlantic sector

NASA Astrophysics Data System (ADS)

Hand, Ralf; Keenlyside, Noel S.; Omrani, Nour-Eddine; Bader, Jürgen; Greatbatch, Richard J.

2018-03-01

Beside its global effects, climate change is manifested in many regionally pronounced features mainly resulting from changes in the oceanic and atmospheric circulation. Here we investigate the influence of the North Atlantic SST on shaping the winter-time response to global warming. Our results are based on a long-term climate projection with the Max Planck Institute Earth System Model (MPI-ESM) to investigate the influence of North Atlantic sea surface temperature pattern changes on shaping the atmospheric climate change signal. In sensitivity experiments with the model's atmospheric component we decompose the response into components controlled by the local SST structure and components controlled by global/remote changes. MPI-ESM simulates a global warming response in SST similar to other climate models: there is a warming minimum—or "warming hole"—in the subpolar North Atlantic, and the sharp SST gradients associated with the Gulf Stream and the North Atlantic Current shift northward by a few a degrees. Over the warming hole, global warming causes a relatively weak increase in rainfall. Beyond this, our experiments show more localized effects, likely resulting from future SST gradient changes in the North Atlantic. This includes a significant precipitation decrease to the south of the Gulf Stream despite increased underlying SSTs. Since this region is characterised by a strong band of precipitation in the current climate, this is contrary to the usual case that wet regions become wetter and dry regions become drier in a warmer climate. A moisture budget analysis identifies a complex interplay of various processes in the region of modified SST gradients: reduced surface winds cause a decrease in evaporation; and thermodynamic, modified atmospheric eddy transports, and coastal processes cause a change in the moisture convergence. The changes in the the North Atlantic storm track are mainly controlled by the non-regional changes in the forcing. The impact of the local SST pattern changes on regions outside the North Atlantic is small in our setup.

Culture of human anulus fibrosus cells on polyamide nanofibers: extracellular matrix production.

PubMed

Gruber, Helen E; Hoelscher, Gretchen; Ingram, Jane A; Hanley, Edward N

2009-01-01

Studies were approved by the authors' Human Subjects Institutional Review Board. Human anulus cells were tested for growth and extracellular matrix (ECM) production in vitro. To investigate cell attachment, cell proliferation, and ECM production of human intervertebral disc anulus cells seeded onto randomly oriented electrospun polyamide nanofibers. Because nanofibrillar matrices have the potential to promote microenvironments, which may mimic in vivo conditions and resemble connective tissue, their utilization opens new avenues for cell-based tissue engineering applications for disc cells. Anulus cells were isolated from 4 cervical spine surgical disc specimens, expanded, and seeded into either routine plastic culture (control) or a nanofiber surface of randomly oriented electrospun polyamide nanofibers (Ultra-Web-coated culture dish, Corning) with a positive charge or without a charge. Cells were cultured for 9 days, digital images captured, cells harvested, embedded in paraffin, and examined for production of extracellular matrix (ECM). Additional anulus cultures were tested to quantitatively assess total proteoglycan production and cell proliferation under control or nanofiber cultures. Cells attached well and exhibited cell extensions within the nanofiber layers; cells on the charged nanofiber surface deposited greater amounts of chondroitin sulfate than of type II collagen than cells cultured on the uncharged nanofiber surface. Results showed that culture of anulus cells on nanofibers was permissive for secretion and assembly of type II collagen and chondroitin sulfate. Significantly greater total proteoglycan formation was present after culture on the nanofiber with added charge conditions {control, 0.6116 microg/mL +/- 0.186 [4] [mean +/- sem(n)] vs. 1.201 +/- 0.2509 [4], P < 0.05}. Cell proliferation, however, did not differ among treatment groups. Culture of anulus cells on nanofibers was found to be permissive for secretion and assembly of type II collagen and chondroitin sulfate, and culture on nanofibers with added charge significantly increased total proteoglycan production. These novel findings point to the need for further examination of nanofibrillar 3D culture of anulus cells for tissue engineering applications.

78 FR 27408 - National Cancer Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-10

... Support; 93.398, Cancer Research Manpower; 93.399, Cancer Control, National Institutes of Health, HHS... ``Development of Blood-based Methods for the Detection of Cancer Recurrence in Post-Therapy Breast Cancer... Officer, Research Programs Review Branch, Division of Extramural Activities, National Cancer Institute...

76 FR 576 - National Cancer Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

..., Cancer Centers Support; 93.398, Cancer Research Manpower; 93.399, Cancer Control, National Institutes of...: Wlodek Lopaczynski, M.D., PhD, Scientific Review Officer, Research Programs Review Branch, Division of... Institute Special Emphasis Panel; Collaborative Research in Integrative Cancer Biology and the Tumor...

Institutions, incentives and the future of fisheries

PubMed Central

Hilborn, Ray; Orensanz, J. M. (Lobo); Parma, Ana M.

2005-01-01

Fisheries around the world are managed with a broad range of institutional structures. Some of these have been quite disastrous, whereas others have proven both biologically and economically successful. Unsuccessful systems have generally involved either open access, attempts at top-down control with poor ability to monitor and implement regulations, or reliance on consensus. Successful systems range from local cooperatives to strong governmental control, to various forms of property rights, but usually involve institutional systems that provide incentives to individual operators that lead to behaviour consistent with conservation. PMID:15744918

Control Surface Interaction Effects of the Active Aeroelastic Wing Wind Tunnel Model

NASA Technical Reports Server (NTRS)

Heeg, Jennifer

2006-01-01

This paper presents results from testing the Active Aeroelastic Wing wind tunnel model in NASA Langley s Transonic Dynamics Tunnel. The wind tunnel test provided an opportunity to study aeroelastic system behavior under combined control surface deflections, testing for control surface interaction effects. Control surface interactions were observed in both static control surface actuation testing and dynamic control surface oscillation testing. The primary method of evaluating interactions was examination of the goodness of the linear superposition assumptions. Responses produced by independently actuating single control surfaces were combined and compared with those produced by simultaneously actuating and oscillating multiple control surfaces. Adjustments to the data were required to isolate the control surface influences. Using dynamic data, the task increases, as both the amplitude and phase have to be considered in the data corrections. The goodness of static linear superposition was examined and analysis of variance was used to evaluate significant factors influencing that goodness. The dynamic data showed interaction effects in both the aerodynamic measurements and the structural measurements.

Ohno continuous casting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soda, H.; McLean, A.; Motoyasu, G.

1995-04-01

Production of net-shape products directly from the liquid is an attractive manufacturing route for alloys that are difficult to process or that cannot be rolled, drawn, or extruded. Developed at the Chiba Institute of Technology in Japan, the Ohno Continuous Casting (OCC) approach not only provides significant cost savings, but also has the potential to create new products. OCC process equipment includes a melting furnace, crucible, mold level-control block, cooling device, and pinch rolls. OCC is currently used to produce copper rods and wires for audio and video cables, and aluminum alloy welding rods for hard-surfacing applications. For example, Mitsuimore » Engineering and Ship Building Co. has used OCC to produce copper tubing products with internal fins and partitions for applications such as heat exchanger tubes and induction coils.« less

Virtual Environments in Scientific Visualization

NASA Technical Reports Server (NTRS)

Bryson, Steve; Lisinski, T. A. (Technical Monitor)

1994-01-01

Virtual environment technology is a new way of approaching the interface between computers and humans. Emphasizing display and user control that conforms to the user's natural ways of perceiving and thinking about space, virtual environment technologies enhance the ability to perceive and interact with computer generated graphic information. This enhancement potentially has a major effect on the field of scientific visualization. Current examples of this technology include the Virtual Windtunnel being developed at NASA Ames Research Center. Other major institutions such as the National Center for Supercomputing Applications and SRI International are also exploring this technology. This talk will be describe several implementations of virtual environments for use in scientific visualization. Examples include the visualization of unsteady fluid flows (the virtual windtunnel), the visualization of geodesics in curved spacetime, surface manipulation, and examples developed at various laboratories.

Cytocompatibility of Direct Laser Interference-patterned Titanium Surfaces for Implants.

PubMed

Hartjen, Philip; Nada, Ola; Silva, Thiago Gundelwein; Precht, Clarissa; Henningsen, Anders; Holthaus, Marzellus GROßE; Gulow, Nikolai; Friedrich, Reinhard E; Hanken, Henning; Heiland, Max; Zwahr, Christoph; Smeets, Ralf; Jung, Ole

2017-01-01

In an effort to generate titanium surfaces for implants with improved osseointegration, we used direct laser interference patterning (DLIP) to modify the surface of pure titanium grade 4 of four different structures. We assessed in vitro cytoxicity and cell attachment, as well as the viability and proliferation of cells cultured directly on the surfaces. Attachment of the cells to the modified surfaces was comparably good compared to that of cells on grit-blasted and acid-etched reference titanium surfaces. In concordance with this, viability and proliferation of the cells directly cultured on the specimens were similar on all the titanium surfaces, regardless of the laser modification, indicating good cytocompatibility. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Shuttle Flight Operations Contract Generator Maintenance Facility Land Use Control Implementation Plan (LUCIP)

NASA Technical Reports Server (NTRS)

Applegate, Joseph L.

2014-01-01

This Land Use Control Implementation Plan (LUCIP) has been prepared to inform current and potential future users of the Kennedy Space Center (KSC) Shuttle Flight Operations Contract Generator Maintenance Facility (SFOC; SWMU 081; "the Site") of institutional controls that have been implemented at the Site1. Although there are no current unacceptable risks to human health or the environment associated with the SFOC, an institutional land use control (LUC) is necessary to prevent human health exposure to antimony-affected groundwater at the Site. Controls will include periodic inspection, condition certification, and agency notification.

Land Use Control Implementation Plan

NASA Technical Reports Server (NTRS)

Starr, Andrew Scott

2015-01-01

This Land Use Control Implementation Plan (LUCIP) has been prepared to inform current and potential future users of Building M7-505 of institutional controls that have been implemented at the site. Although there are no current unacceptable risks to human health or the environment associated with Building M7-505, institutional land use controls (LUCs) are necessary to prohibit the use of groundwater from the site. LUCs are also necessary to prevent access to soil under electrical equipment in the northwest portion of the site. Controls necessary to prevent human exposure will include periodic inspection, condition certification, and agency notification.

Evolving water management institutions in Mexico

NASA Astrophysics Data System (ADS)

Hearne, Robert R.

2004-12-01

Mexico's water management institutions are undergoing a gradual but dramatic change that corresponds to other changes in Mexican society. Implementing these changes has led to the creation of new institutions, including river basin councils, state water commissions, aquifer management committees, and water user associations. Established institutions such as the National Water Commission have accepted new roles. Some of these changes can be considered to be superficial, but this institutional change is impressive. Successful practices can be identified. These include the transfer of the management of large irrigation districts to the users, the periodic practice of establishing a national water plan, the cautious approach to private sector participation in water supply and sanitation, and the national registry of water use. Remaining challenges include weak river basin and aquifer management organizations, overexploitation of key aquifers, polluted surface water, and the inability of water markets to facilitate intersectoral water transfers.

The impact of poor governance on water and sediment quality: a case study in the Pitimbu River, Brazil

NASA Astrophysics Data System (ADS)

Moreira, L.; Adamowski, J.; Gaskin, S.; Saraiva, A.

2014-09-01

Applying a collaborative approach under a power-sharing institutional structure, coupled with a shift in paradigms, sustainable water resources management often requires political-institutional reform to achieve its goals. Most of Brazil's river basins are subject to rapid urbanization; however, basin stakeholders generally lack sufficient institutional capacity to address the attending water resource issues. Subject to urbanisation, the Pitimbu River basin supplies potable water to approximately 280 000 people in Brazil's Natal region. This study investigated how current institutional models influence both water management and fluvial contamination by metals. Sediment samples collected at eight sites along the river revealed elevated levels of Pb, Fe, Al, Ni and Zn, whose sources were linked to industries, vehicles, as well as agricultural and construction wastes. Aluminium enrichment of surface waters was mainly linked to inadequate sanitation infrastructure. In light of this, the region's poor institutional capacity must be addressed through institutional reform, including a new management structure open to public collective water management planning. In so doing, Brazil's water policies should acknowledge capacity building as a critical element of institutional reform.

Familial and Institutional Factors: Job Satisfaction for Female Counselor Educators

ERIC Educational Resources Information Center

Alexander-Albritton, Carrie; Hill, Nicole R.

2015-01-01

Job satisfaction based on familial and institutional factors was explored for 157 female counselor educators. Results indicate that female associate professors had lower levels of intrinsic rewards domain after controlling for institutional type. Parental responsibility and partnership status were equivocal, with significant interaction effects…

75 FR 63493 - National Cancer Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

..., Cancer Centers Support; 93.398, Cancer Research Manpower; 93.399, Cancer Control, National Institutes of... Institute Special Emphasis Panel, Community/Minority Based Clinical Oncology Program (CCOP)(U10). Date.... 93.392, Cancer Construction; 93.393, Cancer Cause and Prevention Research; 93.394, Cancer Detection...

Private vs. Public Higher Education Budgeting

ERIC Educational Resources Information Center

Beamer, Sarah A.

2011-01-01

Private higher education institutions are those entities owned and operated by the private sector, while public institutions are those established, supported, and controlled by a governmental agency, most often a state. Key differences exist between private and public institutions that affect budgeting in critical ways. Such differences include…

[Risks and control of complete market-oriented reforms of medical institutions].

PubMed

Ding, Jiannong; Tian, Yongquan

2014-04-01

Marketization has become the mainstream since the new public management emerges globally in second half of the 20th century. Some countries infuse private capital into medical institutions which used to be managed by the government originally, and cause the medical industry reforms to be market-oriented. Market-oriented reforms of medical institutions may have risks in the following aspects: the risk of uneven distribution of medical resources, the risk of market failure, the moral risk of government renting-seeking and corruption and the decay of social justice values. Measures of controlling these risks include defining the function orientation of the government, completing the institution-building of healthcare system, improving primary medical system and strengthening social consciousness of hospitals.

Computing Visible-Surface Representations,

DTIC Science & Technology

1985-03-01

Terzopoulos N00014-75-C-0643 9. PERFORMING ORGANIZATION NAME AMC ADDRESS 10. PROGRAM ELEMENT. PROJECT, TASK Artificial Inteligence Laboratory AREA A...Massachusetts Institute of lechnolog,. Support lbr the laboratory’s Artificial Intelligence research is provided in part by the Advanced Rtccarcl Proj...dynamically maintaining visible surface representations. Whether the intention is to model human vision or to design competent artificial vision systems

Institutional Level Identity Control Strategies in the Distance Education Environment: A Survey of Administrative Staff

ERIC Educational Resources Information Center

Amigud, Alexander

2013-01-01

Physical separation of students and instructors creates the gap of anonymity and limited control over the remote learning environment. The ability of academic institutions to authenticate students and validate authorship of academic work at various points during a course is necessary for preserving not only perceived credibility but also public…

National Biocontainment Training Center

DTIC Science & Technology

2014-08-01

and Dr. Christopher Kasanga, Virologist, SACIDS, SUA. Pictured bottom right: Martha Betson, an instructor at Sokoine from the Royal Veterinary ...laboratories in the Pendik Veterinary Control Institute, which is a national research laboratory under the Turkish Ministry of Food, Agriculture and Livestock...Gargili (first row, center) for laboratory staff of the Pendik Veterinary Control Institute, a national research laboratory under the Turkish

Bactericidal effects of negative air ions on airborne and surface Salmonella enteritidis from an artificially generated aerosol.

PubMed

Seo, K H; Mitchell, B W; Holt, P S; Gast, R K

2001-01-01

The bactericidal effect of high levels of negative ions was studied using a custom-built electrostatic space charge device. To investigate whether the ion-enriched air exerted a bactericidal effect, an aerosol containing Salmonella Enteritidis (SE) was pumped into a sealed plastic chamber. Plates of XLT4 agar were attached to the walls, top, and bottom of the chamber and exposed to the aerosol for 3 h with and without the ionizer treatment. The plates were then removed from the chamber, incubated at 37 degrees C for 24 h, and colonies were counted. An average of greater than 10(3) CFU/plate were observed on plates exposed to the aerosol without the ionizer treatment (control) compared with an average of less than 53 CFU/plate on the ionizer-treated plates. In another series of experiments, the SE aerosol was pumped for 3 h into an empty chamber containing only the ionizer and allowed to collect on the internal surfaces. The inside surfaces of the chamber were then rinsed with 100 ml phosphate-buffered saline that was then plated onto XLT4 plates. While the rinse from the control chamber contained colony counts greater than 400 CFU/ml of wash, no colonies were found in the rinse from the ionizer-treatment chamber. These results indicate that high levels of negative air ions can have a significant impact on the airborne microbial load, and that most of this effect is through direct killing of the organisms. This technology, which also causes significant reduction in airborne dust, has already been successfully applied for poultry hatching cabinets and caged layer rooms. Other potential applications include any enclosed space such as food processing areas, medical institutions, the workplace, and the home, where reduction of airborne and surface pathogens is desired.

Interactions between protein molecules and the virus removal membrane surface: Effects of immunoglobulin G adsorption and conformational changes on filter performance.

PubMed

Hamamoto, Ryo; Ito, Hidemi; Hirohara, Makoto; Chang, Ryongsok; Hongo-Hirasaki, Tomoko; Hayashi, Tomohiro

2018-03-01

Membrane fouling commonly occurs in all filter types during virus filtration in protein-based biopharmaceutical manufacturing. Mechanisms of decline in virus filter performance due to membrane fouling were investigated using a cellulose-based virus filter as a model membrane. Filter performance was critically dependent on solution conditions; specifically, ionic strength. To understand the interaction between immunoglobulin G (IgG) and cellulose, sensors coated with cellulose were fabricated for surface plasmon resonance and quartz crystal microbalance with energy dissipation measurements. The primary cause of flux decline appeared to be irreversible IgG adsorption on the surface of the virus filter membrane. In particular, post-adsorption conformational changes in the IgG molecules promoted further irreversible IgG adsorption, a finding that could not be adequately explained by DLVO theory. Analyses of adsorption and desorption and conformational changes in IgG molecules on cellulose surfaces mimicking cellulose-based virus removal membranes provide an effective approach for identifying ways of optimizing solution conditions to maximize virus filter performance. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:379-386, 2018. © 2017 American Institute of Chemical Engineers.

Using a mentoring approach to implement an inpatient glycemic control program in United States hospitals.

PubMed

Rushakoff, Robert J; Sullivan, Mary M; Seley, Jane Jeffrie; Sadhu, Archana; O'Malley, Cheryl W; Manchester, Carol; Peterson, Eric; Rogers, Kendall M

2014-09-01

establishing an inpatient glycemic control program is challenging, requires years of work, significant education and coordination of medical, nursing, dietary, and pharmacy staff, and support from administration and Performance Improvement departments. We undertook a 2 year quality improvement project assisting 10 medical centers (academic and community) across the US to implement inpatient glycemic control programs. the project was comprised of 3 interventions. (1) One day site visit with a faculty team (MD and CDE) to meet with key personnel, identify deficiencies and barriers to change, set site specific goals and develop strategies and timelines for performance improvement. (2) Three webinar follow-up sessions. (3) Web site for educational resources. Updates, challenges, and accomplishments for each site were reviewed at the time of each webinar and progress measured at the completion of the project with an evaluation questionnaire. as a result of our intervention, institutions revised and simplified formularies and insulin order sets (with CHO counting options); implemented glucometrics and CDE monitoring of inpatient glucoses (assisting providers with orders); added new protocols for DKA and perinatal treatment; and implemented nursing, physician and patient education initiatives. Changes were institution specific, fitting the local needs and cultures. As to the extent to which Institution׳s goals were satisfied: 2 reported "completely", 4 "mostly," 3 "partially," and 1 "marginally". Institutions continue to move toward fulfilling their goals. an individualized, structured, performance improvement approach with expert faculty mentors can help facilitate change in an institution dedicated to implementing an inpatient glycemic control program. Copyright © 2014 Elsevier Inc. All rights reserved.

Microdesigning of Lightweight/High Strength Ceramic Materials.

DTIC Science & Technology

1987-08-30

if applicable) AFSSR NC Grant No. AFOSR-83-0375 8c. ADDRESS( Cft , State. and ZIP Code) 10 SOURCE OF FUNDING NUMBERS Bd.40PROGRAMO IPROJECT I TASK...The Adsorption of Pohmethacrvfic Acid from Solut.on.- Ph.D. Thesis . Polytechnic Institute of Brooklyn (1961). I5. R. J. Hunter. Zeta Potential in...Hasz. ’Surface Reactions and Electrical Double Layer Properties of Ceramic Ox. ides in Aqueous Solution,* M.S. Thesis . Massachusetts Institute of

Proceedings, 95th regular meeting: The Rocky Mountain Coal Mining Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finnie, D.G.

1999-07-01

In addition to the nine convention papers published in these proceedings, information is given on the membership and organization of the Rocky Mountain Coal Mining Institute. The papers are concerned with the economics and management of coal companies, occupational safety of their employees, public anxiety of the environmental impacts of surface mining, and contracting for mining equipment maintenance. Papers have been processed separately for inclusion on the data base.

A Directory of Information Resources in the United States, General Toxicology.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. National Referral Center for Science and Technology.

Listed are institutions and organizations which can serve as information sources on toxicology. Each entry gives the toxicology-related interests of the institution, holdings (of publications), publications of the institution, and information services provided. Poison control centers are listed separately as an appendix. Other appendices list some…

NCAA Council Backs Rules that Would Force Colleges to Monitor Coaches' Outside Income.

ERIC Educational Resources Information Center

Farrell, Charles S.

1986-01-01

The National Collegiate Athletic Association endorses rules requiring coaches to report all athletics-related income to their institutions, prohibiting institution name or logotype use for personal gain without permission, requiring institutions to control collection and distribution of manufacturer contract income, and prohibiting personal gain…

34 CFR 601.21 - Code of conduct.

Code of Federal Regulations, 2010 CFR

2010-07-01

... students of the institution. (D) Entrance and exit counseling services provided to borrowers to meet the institution's responsibilities for entrance and exit counseling as required by §§ 682.604(f) and 682.604(g), as long as the institution's staff are in control of the counseling (whether in person or via...

77 FR 73667 - National Cancer Institute; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-11

... Behavioral Research in Cancer Control. Date: January 9-10, 2013. Time: 10:00 a.m. to 2:00 p.m. Agenda: To..., Research Programs Review Branch, Division of Extramural Activities, National Cancer Institute, NIH, 6116... Committee: National Cancer Institute Special Emphasis Panel; Quantitative Imaging for the Evaluation of...

Commentary

ERIC Educational Resources Information Center

Heller, Monica

2014-01-01

The subject of multilingualism in institutions has long been a central interest in sociolinguistics, and it is worth asking why. The answer lies in the role of institutions in the modern nation state, a point made over and over again by Michel Foucault. Institutions control access to all the resources a state can distribute; it distributes them…

Control surfaces of aquatic vertebrates: active and passive design and function.

PubMed

Fish, Frank E; Lauder, George V

2017-12-01

Aquatic vertebrates display a variety of control surfaces that are used for propulsion, stabilization, trim and maneuvering. Control surfaces include paired and median fins in fishes, and flippers and flukes in secondarily aquatic tetrapods. These structures initially evolved from embryonic fin folds in fishes and have been modified into complex control surfaces in derived aquatic tetrapods. Control surfaces function both actively and passively to produce torque about the center of mass by the generation of either lift or drag, or both, and thus produce vector forces to effect rectilinear locomotion, trim control and maneuvers. In addition to fins and flippers, there are other structures that act as control surfaces and enhance functionality. The entire body can act as a control surface and generate lift for stability in destabilizing flow regimes. Furthermore, control surfaces can undergo active shape change to enhance their performance, and a number of features act as secondary control structures: leading edge tubercles, wing-like canards, multiple fins in series, finlets, keels and trailing edge structures. These modifications to control surface design can alter flow to increase lift, reduce drag and enhance thrust in the case of propulsive fin-based systems in fishes and marine mammals, and are particularly interesting subjects for future research and application to engineered systems. Here, we review how modifications to control surfaces can alter flow and increase hydrodynamic performance. © 2017. Published by The Company of Biologists Ltd.

Overview of Airport Surface Traffic Control - Present and Future

DOT National Transportation Integrated Search

1975-09-01

The Airport Surface Traffic Control System, an integral part of the nation's Air Traffic Control System, is specifically concerned with the safe and efficient control of airport airside surface traffic. The current status of airport surface traffic c...

Tiperon

NASA Technical Reports Server (NTRS)

Lewis, Carl E. (Inventor); Carlton, Lindley A. (Inventor); Saeks, Richard E. (Inventor)

2004-01-01

A control surface for an air vehicle (e.g., an aircraft, rocket, or missile) is useful for flight control at both subsonic and supersonic speeds. The control surface defines the outboardmost tip of a flight structure (e.g., a wing, tail or other stabilizer) of the air vehicle. Hence, the control surface is referred to as a `tiperon`. The tiperon has an approximately L-shaped configuration, and can be rotated relative to a fixed portion of the flight structure about a control axis. The respective surface areas of the tiperon sections forward and aft of the control axis are proportioned to place the subsonic center of pressure aft of the control axis to enhance aircraft control, and preferably also forward of the centroid of tiperon surface area. Also, the control surface sections forward and aft of the control axis are preferably mass-balanced, or at least nearly so, to enhance aircraft control at supersonic speeds. Either of the tiperon sections forward and aft of the control axis can be tapered to reduce the dependence of the moment exerted by air flow about the control axis, upon the tiperon's angle-of-attack. The tiperon also has enough surface area to control the air vehicle, even at low airspeeds. The invention is also directed to air vehicles incorporating one or more such control surfaces.

Round Robin evaluation of soil moisture retrieval models for the MetOp-A ASCAT Instrument

NASA Astrophysics Data System (ADS)

Gruber, Alexander; Paloscia, Simonetta; Santi, Emanuele; Notarnicola, Claudia; Pasolli, Luca; Smolander, Tuomo; Pulliainen, Jouni; Mittelbach, Heidi; Dorigo, Wouter; Wagner, Wolfgang

2014-05-01

Global soil moisture observations are crucial to understand hydrologic processes, earth-atmosphere interactions and climate variability. ESA's Climate Change Initiative (CCI) project aims to create a global consistent long-term soil moisture data set based on the merging of the best available active and passive satellite-based microwave sensors and retrieval algorithms. Within the CCI, a Round Robin evaluation of existing retrieval algorithms for both active and passive instruments was carried out. In this study we present the comparison of five different retrieval algorithms covering three different modelling principles applied to active MetOp-A ASCAT L1 backscatter data. These models include statistical models (Bayesian Regression and Support Vector Regression, provided by the Institute for Applied Remote Sensing, Eurac Research Viale Druso, Italy, and an Artificial Neural Network, provided by the Institute of Applied Physics, CNR-IFAC, Italy), a semi-empirical model (provided by the Finnish Meteorological Institute), and a change detection model (provided by the Vienna University of Technology). The algorithms were applied on L1 backscatter data within the period of 2007-2011, resampled to a 12.5 km grid. The evaluation was performed over 75 globally distributed, quality controlled in situ stations drawn from the International Soil Moisture Network (ISMN) using surface soil moisture data from the Global Land Data Assimilation System (GLDAS-) Noah land surface model as second independent reference. The temporal correlation between the data sets was analyzed and random errors of the the different algorithms were estimated using the triple collocation method. Absolute soil moisture values as well as soil moisture anomalies were considered including both long-term anomalies from the mean seasonal cycle and short-term anomalies from a five weeks moving average window. Results show a very high agreement between all five algorithms for most stations. A slight vegetation dependency of the errors and a spatial decorrelation of the performance patterns of the different algorithms was found. We conclude that future research should focus on understanding, combining and exploiting the advantages of all available modelling approaches rather than trying to optimize one approach to fit every possible condition.

Chemistry-Climate Interactions in the Goddard Institute for Space Studies General Circulation Model. 2; New Insights into Modeling the Pre-Industrial Atmosphere

NASA Technical Reports Server (NTRS)

Grenfell, J. Lee; Shindell, D. T.; Koch, D.; Rind, D.; Hansen, James E. (Technical Monitor)

2002-01-01

We investigate the chemical (hydroxyl and ozone) and dynamical response to changing from present day to pre-industrial conditions in the Goddard Institute for Space Studies General Circulation Model (GISS GMC). We identify three main improvements not included by many other works. Firstly, our model includes interactive cloud calculations. Secondly we reduce sulfate aerosol which impacts NOx partitioning hence Ox distributions. Thirdly we reduce sea surface temperatures and increase ocean ice coverage which impact water vapor and ground albedo respectively. Changing the ocean data (hence water vapor and ozone) produces a potentially important feedback between the Hadley circulation and convective cloud cover. Our present day run (run 1, control run) global mean OH value was 9.8 x 10(exp 5) molecules/cc. For our best estimate of pre-industrial conditions run (run 2) which featured modified chemical emissions, sulfate aerosol and sea surface temperatures/ocean ice, this value changed to 10.2 x 10(exp 5) molecules/cc. Reducing only the chemical emissions to pre-industrial levels in run 1 (run 3) resulted in this value increasing to 10.6 x 10(exp 5) molecules/cc. Reducing the sulfate in run 3 to pre-industrial levels (run 4) resulted in a small increase in global mean OH (10.7 x 10(exp 5) molecules/cc). Changing the ocean data in run 4 to pre-industrial levels (run 5) led to a reduction in this value to 10.3 x 10(exp 5) molecules/cc. Mean tropospheric ozone burdens were 262, 181, 180, 180, and 182 Tg for runs 1-5 respectively.

High-performance dual-speed CCD camera system for scientific imaging

NASA Astrophysics Data System (ADS)

Simpson, Raymond W.

1996-03-01

Traditionally, scientific camera systems were partitioned with a `camera head' containing the CCD and its support circuitry and a camera controller, which provided analog to digital conversion, timing, control, computer interfacing, and power. A new, unitized high performance scientific CCD camera with dual speed readout at 1 X 106 or 5 X 106 pixels per second, 12 bit digital gray scale, high performance thermoelectric cooling, and built in composite video output is described. This camera provides all digital, analog, and cooling functions in a single compact unit. The new system incorporates the A/C converter, timing, control and computer interfacing in the camera, with the power supply remaining a separate remote unit. A 100 Mbyte/second serial link transfers data over copper or fiber media to a variety of host computers, including Sun, SGI, SCSI, PCI, EISA, and Apple Macintosh. Having all the digital and analog functions in the camera made it possible to modify this system for the Woods Hole Oceanographic Institution for use on a remote controlled submersible vehicle. The oceanographic version achieves 16 bit dynamic range at 1.5 X 105 pixels/second, can be operated at depths of 3 kilometers, and transfers data to the surface via a real time fiber optic link.

Templating Routes to Supported Oxide Catalysts by Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Notestein, Justin M.

2016-09-08

The rational design and understanding of supported oxide catalysts requires at least three advancements, in order of increasing complexity: the ability to quantify the number and nature of active sites in a catalytic material, the ability to place external controls on the number and structure of these active sites, and the ability to assemble these active sites so as to carry out more complex functions in tandem. As part of an individual investigator research program that is integrated with the Northwestern University Institute for Catalysis in Energy Processes (ICEP) as of 2015, significant advances were achieved in these three areas.more » First, phosphonic acids were utilized in the quantitative assessment of the number of active and geometrically-available sites in MO x-SiO 2 catalysts, including nanocrystalline composites, co-condensed materials, and grafted structures, for M=Ti, Zr, Hf, Nb, and Ta. That work built off progress in understanding supported Fe, Cu, and Co oxide catalysts from chelating and/or multinuclear precursors to maximize surface reactivity. Secondly, significant progress was made in the new area of using thin oxide overcoats containing ‘nanocavities’ from organic templates as a method to control the dispersion and thermal stability of subsequently deposited metal nanoparticles or other catalytic domains. Similar methods were used to control surface reactivity in SiO 2-Al 2O 3 acid catalysts and to control reactant selectivity in Al 2O 3-TiO 2 photocatalysts. Finally, knowledge gained from the first two areas has been combined to synthesize a tandem catalyst for hydrotreating reactions and an orthogonal tandem catalyst system where two subsequent reactions in a reaction network are independently controlled by light and heat. Overall, work carried out under this project significantly advanced the knowledge of synthesis-structure-function relationships in supported oxide catalysts for energy applications.« less

Pediatric patient safety events during hospitalization: approaches to accounting for institution-level effects.

PubMed

Slonim, Anthony D; Marcin, James P; Turenne, Wendy; Hall, Matt; Joseph, Jill G

2007-12-01

To determine the rates, patient, and institutional characteristics associated with the occurrence of patient safety indicators (PSIs) in hospitalized children and the degree of statistical difference derived from using three approaches of controlling for institution level effects. Pediatric Health Information System Dataset consisting of all pediatric discharges (<21 years of age) from 34 academic, freestanding children's hospitals for calendar year 2003. The rates of PSIs were computed for all discharges. The patient and institutional characteristics associated with these PSIs were calculated. The analyses sequentially applied three increasingly conservative methods to control for the institution-level effects robust standard error estimation, a fixed effects model, and a random effects model. The degree of difference from a "base state," which excluded institution-level variables, and between the models was calculated. The effects of these analyses on the interpretation of the PSIs are presented. PSIs are relatively infrequent events in hospitalized children ranging from 0 per 10,000 (postoperative hip fracture) to 87 per 10,000 (postoperative respiratory failure). Significant variables associated PSIs included age (neonates), race (Caucasians), payor status (public insurance), severity of illness (extreme), and hospital size (>300 beds), which all had higher rates of PSIs than their reference groups in the bivariable logistic regression results. The three different approaches of adjusting for institution-level effects demonstrated that there were similarities in both the clinical and statistical significance across each of the models. Institution-level effects can be appropriately controlled for by using a variety of methods in the analyses of administrative data. Whenever possible, resource-conservative methods should be used in the analyses especially if clinical implications are minimal.

Deterring Cybertrespass and Securing Cyberspace: Lessons from United States Border Control Strategies

DTIC Science & Technology

2016-12-01

as a Fulbright Scholar at Durham University’s Institute of Advanced Study . Dr. Manjikian’s publications in- clude Apocalypse and Post -Politics: The...concerning the role of ground forces in achieving national security objectives. The Strategic Studies Institute publishes national security and...international audience, and honor Soldiers—past and present. STRATEGIC STUDIES INSTITUTE The Strategic Studies Institute (SSI) is part of the U.S

Event-driven simulation of the state institution activity for the service provision based on business processes

NASA Astrophysics Data System (ADS)

Kataev, M. Yu.; Loseva, N. V.; Mitsel, A. A.; Bulysheva, L. A.; Kozlov, S. V.

2017-01-01

The paper presents an approach, based on business processes, assessment and control of the state of the state institution, the social insurance Fund. The paper describes the application of business processes, such as items with clear measurable parameters that need to be determined, controlled and changed for management. The example of one of the business processes of the state institutions, which shows the ability to solve management tasks, is given. The authors of the paper demonstrate the possibility of applying the mathematical apparatus of imitative simulation for solving management tasks.

Satisficing Decision-Making in Supervisory Control. Part 2.

DTIC Science & Technology

1986-07-31

purpose of the United States Government. C-P Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, Massachusetts 02139...of Mechanical Engineering Massachusetts Institute of Technology Cambridge MA 02139 Satisficing Decision-Making in Supervisory Control Leonid Charny...example, that there are two attributes, speed and accuracy, and one is selecting a robot manipulator based -4n these two parameters. A set of alternatives

Celebrating 50 years of the laser (Scientific session of the general meeting of the Physical Sciences Division of the Russian Academy of Sciences, 13 December 2010)

NASA Astrophysics Data System (ADS)

2011-08-01

A scientific session of the general meeting of the Physical Sciences Division of the Russian Academy of Sciences (RAS) dedicated to the 50th anniversary of the creation of lasers was held in the Conference Hall of the Lebedev Physical Institute, RAS, on 13 December 2010. The agenda of the session announced on the website www.gpad.ac.ru of the RAS Physical Sciences Division listed the following reports: (1) Matveev V A, Bagaev S N Opening speech; (2) Bratman V L, Litvak A G, Suvorov E V (Institute of Applied Physics, RAS, Nizhny Novgorod) "Mastering the terahertz domain: sources and applications"; (3) Balykin V I (Institute of Spectroscopy, RAS, Troitsk, Moscow region) "Ultracold atoms and atom optics"; (4) Ledentsov N N (Ioffe Physical Technical Institute, RAS, St. Petersburg) "New-generation surface-emitting lasers as the key element of the computer communication era"; (5) Krasil'nik Z F (Institute for the Physics of Microstructures, RAS, Nizhny Novgorod) "Lasers for silicon optoelectronics"; (6) Shalagin A M (Institute of Automation and Electrometry, Siberian Branch, RAS, Novosibirsk) "High-power diode-pumped alkali metal vapor lasers"; (7) Kul'chin Yu N (Institute for Automation and Control Processes, Far Eastern Branch, RAS, Vladivostok) "Photonics of self-organizing biomineral nanostructures"; (8) Kolachevsky N N (Lebedev Physical Institute, RAS, Moscow) "Laser cooling of rare-earth atoms and precision measurements". The papers written on the basis of reports 2-4, 7, and 8 are published below.Because the paper based on report 6 was received by the Editors late, it will be published in the October issue of Physics-Uspekhi together with the material related to the Scientific Session of the Physical Sciences Division, RAS, of 22 December 2010. • Mastering the terahertz domain: sources and applications, V L Bratman, A G Litvak, E V Suvorov Physics-Uspekhi, 2011, Volume 54, Number 8, Pages 837-844 • Ultracold atoms and atomic optics, V I Balykin Physics-Uspekhi, 2011, Volume 54, Number 8, Pages 844-852 • New-generation vertically emitting lasers as a key factor in the computer communication era, N N Ledentsov, J A Lott Physics-Uspekhi, 2011, Volume 54, Number 8, Pages 853-858 • The photonics of self-organizing biomineral nanostructures, Yu N Kulchin Physics-Uspekhi, 2011, Volume 54, Number 8, Pages 858-863 • Laser cooling of rare-earth atoms and precision measurements, N N Kolachevsky Physics-Uspekhi, 2011, Volume 54, Number 8, Pages 863-870

[Social control and information democratization: a process under construction].

PubMed

Assis, Marluce Maria Araújo; Villa, Tereza Cristina Scatena

2003-01-01

This work aims at a critical reflection on social control as a legal-institutional achievement and its legitimacy conditions, pointing out strategies for information democratization in the local health system. The text was developed according to three thematic units: the first discusses social participation as a legal-institutional achievement; the second analyzes the essential conditions for legitimacy and the third presents information as a fundamental element for management and social control as an unfinished process that is still under construction.

Age-related changes in humoral and cell-mediated immunity in Down syndrome children living at home.

PubMed

Lockitch, G; Singh, V K; Puterman, M L; Godolphin, W J; Sheps, S; Tingle, A J; Wong, F; Quigley, G

1987-11-01

Abnormalities of humoral and cell-mediated immunity have been described in Down syndrome but reported findings have been inconsistent. Confounding factors have included age, institutional versus home life, hepatitis B antigenemia, and zinc deficiency. To clarify this problem, we studied 64 children with Down syndrome (DS) compared with an age-matched control group. All children had always lived at home. All the DS children were negative for hepatitis B surface antigen. Serum zinc concentration in the DS group was on average 12 micrograms/dl lower than age-matched control children. They also had significantly lower levels of immunoglobulin M, total lymphocyte count, T and B lymphocytes, and T helper and suppressor cells. In vitro lymphocyte response to phytohemagglutinin and concanavalin A was significantly reduced at all ages in the DS group. Lymphocyte response to pokeweed mitogen increased with age in control children but decreased in the DS children. By 18 yr, the mean response for DS was 60000 cpm lower than controls. The DS group had significantly higher concentrations of immunoglobulins A and G than controls and the difference increased with age. Complement fractions C3 and C4 were also higher in the DS group at all ages. The number of HNK-1 positive cells was higher in the DS group than controls at all ages. When hepatitis and institutionalization are excluded as confounding factors, DS children still differ in both humoral and cell-mediated immunity from an age-matched control group.

21 CFR 1311.130 - Requirements for establishing logical access control-Institutional practitioner.

Code of Federal Regulations, 2011 CFR

2011-04-01

... applicable, individual practitioner's DEA registration expires, unless the registration has been renewed. (3) The institutional practitioner's or, where applicable, individual practitioner's DEA registration is...

Nurse-Led Programs to Facilitate Enrollment to Children's Oncology Group Cancer Control Trials.

PubMed

Haugen, Maureen; Kelly, Katherine Patterson; Leonard, Marcia; Mills, Denise; Sung, Lillian; Mowbray, Catriona; Landier, Wendy

2016-09-01

The progress made over the past 50 years in disease-directed clinical trials has significantly increased cure rates for children and adolescents with cancer. The Children's Oncology Group (COG) is now conducting more studies that emphasize improving quality of life for young people with cancer. These types of clinical trials are classified as cancer control (CCL) studies by the National Cancer Institute and require different resources and approaches to facilitate adequate accrual and implementation at COG institutions. Several COG institutions that had previously experienced problems with low accruals to CCL trials have successfully implemented local nursing leadership for these types of studies. Successful models of nurses as institutional leaders and "champions" of CCL trials are described. © 2015 by Association of Pediatric Hematology/Oncology Nurses.

How Do Higher Education Institutions Enhance Their Financial Autonomy? Examples from Finnish Polytechnics

ERIC Educational Resources Information Center

Kohtamaki, Vuokko

2011-01-01

Numerous studies have addressed how state authorities and public funding bodies control, regulate, steer, supervise or oversee higher education institutions. There are fewer studies on how higher education institutions respond to the actions of the mentioned authorities. States have aimed at increasing the autonomy of higher education…

AN EIGHT WEEK SUMMER INSTITUTE TRAINING PROGRAM TO TRAIN INSTRUCTORS OF INSTRUMENTATION TECHNOLOGY.

ERIC Educational Resources Information Center

MCKEE, DELBERT A.

A SUMMER INSTITUTE IN INSTRUMENTATION TECHNOLOGY WAS HELD TO PROVIDE TEACHERS WITH CURRENT KNOWLEDGE ON AUTOMATIC, PROCESS-CONTROL INSTRUMENTATION. A PREVIOUSLY DEVELOPED GUIDE FOR A 2-YEAR, POST-HIGH SCHOOL CURRICULUM PROVIDED THE BASIS FOR INSTRUCTION AND DISCUSSION DURING THE INSTITUTE. THREE COURSES IN MEASUREMENT AND INSTRUMENT SHOP…

Building a Peaceful Society: Creative Integration of Peace Education. Peace Education

ERIC Educational Resources Information Center

Finley, Laura

2011-01-01

To truly move toward a more peaceful society, it is imperative that peace education better address structural and institutional violence. This requires that it be integrated into institutions outside of schools and universities. Doing so will be challenging, as many of these institutions are structured on domination and control, not on partnership…

Proceedings of the Summer Institute on Biological Control of Plant Insects and Diseases.

ERIC Educational Resources Information Center

Maxwell, Fowden G., Ed.; Harris, F. A., Ed.

This institute, conducted at Mississippi State University, was an outgrowth of the Council of Higher Education in the Agricultural Science's efforts to study the needs and opportunities for the advancement of scientific knowledge in land grant institutions and recommend programs for implementation. The proceedings serve as an information source to…

Localizing College Retention Efforts: The Distance between Theoretical Orientation and Institution-Specific Needs

ERIC Educational Resources Information Center

Xu, Yonghong Jade

2017-01-01

The study used a theoretically guided questionnaire to examine student experience in college and to gain a better understanding about how college environment affects student persistence. Data were collected from a single four-year institution; the findings suggest that institutional control over academic quality is the most critical factor in…

Enrolling the Tide: A Case Study of Purposeful Campus Enrollment Increases

ERIC Educational Resources Information Center

Hutt, Chris D.; Bray, Nathaniel J.; Jones, Jennifer L.; Leach, Kelly; Ward, Jerome

2010-01-01

Enrollment management is an institutional function that has enjoyed burgeoning attention since the 1970s. The primary function of enrollment management is to control the size and composition of students within an institution. As the number of higher education institutions increased and as the number of high school graduates stagnated--particularly…

Student Press Protected by Faculty Academic Freedom under Contract Law at Private Colleges.

ERIC Educational Resources Information Center

Gray, John; Ciofalo, Andrew

1989-01-01

Absent the constitutional rights enjoyed by the student press at state institutions of higher education, the administration at a private institution is legally free to control the content of its student press. Explores a theory that shifts the focus to academic freedom protected by contracts between faculty and institutions. (MLF)

Quality Control in Christian Higher Education: The Importance of Evaluating What We Do

ERIC Educational Resources Information Center

Bhatia, Sukhwant S.

2009-01-01

In contrast to the long-standing history of assessment in secular higher education, religious institutions have not been at the cutting edge of assessment, evaluation, and research. However, external pressures on institutions have led to a self-examined life, use of reliable indicators of institutional performance, and development of comprehensive…

[IMSS in numbers. Cancers in insured population, 1990-2003].

PubMed

2005-01-01

The epidemiological transition has highlighted the incidence of cancer in the agendas of every health institution. The high demand of health services that require specialized and high cost diagnostic and treatment technologies, obliges the institution to reinforce their resources towards the detection and effective treatment programs. Although the institution has implemented effective prevention and control programs towards cancers that mainly affect women, it still needs to direct resources to control cancers that affect men and other age groups. Statistics shown in this paper demonstrate the increase in the demand of health services in the family physician setting as well as in the specialized medical services and hospitals. Along with the aging of the insured population the incidence of cancer will increase, therefore, the IMSS will have to intensify the prevention and control programs.

Sonic Fatigue Design Guide for Military Aircraft

DTIC Science & Technology

1975-05-01

on Sonic Fatigue Esti- mates," H.Sc. Thesis , School of Engineering, Air Force Institute of Technology, Air University, United States Air Force...ONR) from ZhTF, 15, pp. 63-70, 1945. 2. Krishnamurty, K.; "Sound Radiation from Surface Cutouts in High Speed Flow," Ph.D. Thesis , California Institute...Turbulence," Ph.D. Thesis , University of London, 1962. 10. Gibson, J. S.; ’’Boundary Layer ý’-lse Measurements on a Large Turbofan Aircraft," Paper No

The Southwest Research Institute ultraviolet reflectance chamber (SwURC): a far ultraviolet reflectometer

NASA Astrophysics Data System (ADS)

Winters, Gregory S.; Retherford, Kurt D.; Davis, Michael W.; Escobedo, Stephen M.; Bassett, Eric C.; Patrick, Edward L.; Nagengast, Maggie E.; Fairbanks, Matthew H.; Miles, Paul F.; Parker, Joel W.; Gladstone, G. Randall; Slater, David C.; Stern, S. Alan

2012-10-01

We designed and assembled a highly capable UV reflectometer chamber and data acquisition system to provide bidirectional scattering data of various surfaces and materials. This chamber was initially conceived to create laboratory-based UV reflectance measurements of water frost on lunar soil/regolith simulants, to support interpretation of UV reflectance data from the Lyman Alpha Mapping Project ("LAMP") instrument on-board the NASA Lunar Reconnaissance Orbiter spacecraft. A deuterium lamp illuminates surfaces and materials at a fixed 45° incident beam angle over the 115 to 200 nm range via a monochromator, while a photomultiplier tube detector is scanned to cover emission angles -85° to +85° (with a gap from -60° to -30°, due to the detector blocking the incident beam). Liquid nitrogen cools the material/sample mount when desired. The chamber can be configured to test a wide range of samples and materials using sample trays and holders. Test surfaces to date include aluminum mirrors, water ice, reflectance standards, and frozen mixtures of water and lunar soil/regolith stimulant. Future UV measurements planned include Apollo lunar samples, meteorite samples, other ices, minerals, and optical surfaces. Since this chamber may well be able to provide useful research data for groups outside Southwest Research Institute, we plan to take requests from and collaborate with others in the UV and surface reflection research community.

Gut Microbiome Standardization in Control and Experimental Mice.

PubMed

McCoy, Kathy D; Geuking, Markus B; Ronchi, Francesca

2017-04-03

Mouse models are used extensively to study human health and to investigate the mechanisms underlying human disease. In the past, most animal studies were performed without taking into consideration the impact of the microbiota. However, the microbiota that colonizes all body surfaces, including the gastrointestinal tract, respiratory tract, genitourinary tract, and skin, heavily impacts nearly every aspect of host physiology. When performing studies utilizing mouse models it is critical to understand that the microbiome is heavily impacted by environmental factors, including (but not limited to) food, bedding, caging, and temperature. In addition, stochastic changes in the microbiota can occur over time that also play a role in shaping microbial composition. These factors lead to massive variability in the composition of the microbiota between animal facilities and research institutions, and even within a single facility. Lack of experimental reproducibility between research groups has highlighted the necessity for rigorously controlled experimental designs in order to standardize the microbiota between control and experimental animals. Well controlled experiments are mandatory in order to reduce variability and allow correct interpretation of experimental results, not just of host-microbiome studies but of all mouse models of human disease. The protocols presented are aimed to design experiments that control the microbiota composition between different genetic strains of experimental mice within an animal unit. © 2017 by John Wiley & Sons, Inc. Copyright © 2017 John Wiley & Sons, Inc.

Differences in the use of outsourcing in public and private institutions providing medical services

PubMed Central

Kowalska, Mariola; Religioni, Urszula

2014-01-01

Introduction The costs of health care in Poland are continuously increasing. Thus, almost every institution providing medical services aims at their limitation. One of the costs rationalisation methods in the health care sector is outsourcing. Material and methods The study was conducted in 153 randomly selected institutions providing medical activities. The tool was a questionnaire, available via a web browser. Results Over 30% of public institutions identified the need for financial savings, as the main reason for outsourcing the cleaning function. Among private institutions, the dominant reason for this is too high maintenance cost of the cleaning staff (less than 40% of responses). The huge number of medical institutions use the services of an external company for laundering. Over 30% of public institutions identified as the most common reason for separation of functions laundering lack of resources to upgrade and modernize facilities. Less than 27% of public institutions indicate too high costs of kitchen staff as the main reason for ordering function of feeding. Another reason is the need for financial savings (22% response rate). Some institutions indicate a desire to focus on key areas (20% of responses) and lack of financial resources to upgrade and modernize the kitchen (20% response rate). Public and private institutions exercise control over the quality and method performed by an external service (71% of public institutions and 59% of private institutions). Private institutions often informally exercise external control (difference confirmed – Fisher's exact test). Less than 90% of public institutions indicated satisfaction with the services provided by external companies. Conclusions The adaptation of outsourcing in medical facilities leads to financial efficiency improvement. Through the separation of some medical functions and entrusting their realisation to external companies, medical institutions can focus on their basic activity that is the provision of health services. PMID:25097595

Design and simulation of the surface shape control system for membrane mirror

NASA Astrophysics Data System (ADS)

Zhang, Gengsheng; Tang, Minxue

2009-11-01

The surface shape control is one of the key technologies for the manufacture of membrane mirror. This paper presents a design of membrane mirror's surface shape control system on the basis of fuzzy logic control. The system contains such function modules as surface shape design, surface shape control, surface shape analysis, and etc. The system functions are realized by using hybrid programming technology of Visual C# and MATLAB. The finite element method is adopted to simulate the surface shape control of membrane mirror. The finite element analysis model is established through ANSYS Parametric Design Language (APDL). ANSYS software kernel is called by the system in background running mode when doing the simulation. The controller is designed by means of controlling the sag of the mirror's central crosssection. The surface shape of the membrane mirror and its optical aberration are obtained by applying Zernike polynomial fitting. The analysis of surface shape control and the simulation of disturbance response are performed for a membrane mirror with 300mm aperture and F/2.7. The result of the simulation shows that by using the designed control system, the RMS wavefront error of the mirror can reach to 142λ (λ=632.8nm), which is consistent to the surface accuracy of the membrane mirror obtained by the large deformation theory of membrane under the same condition.

[Role of the independent microbiology laboratory in supporting infection control programs in small to mid-sized hospitals].

PubMed

Yanagisawa, Hideji

2009-05-01

With the revision of the Medical Service Law in 2006 by the Japanese Ministry of Health, Labour and Welfare (MHLW), all healthcare institutions are now required to implement a healthcare risk management program including infection control program. At a national level, an infection control surveillance program (JANIS) was implemented in July 2007. Regular weekly, monthly, and yearly infection control surveillance reports from independent microbiology laboratories can make significant contributions to infection control programs in small to mid-sized hospitals; furthermore, such programs are consistent with the framework of the MHLW's objective of strengthening risk management in healthcare institutions. Against the backdrop of current efforts to improve risk management, independent laboratories can make a significant contribution. Independent laboratories must play a role beyond merely receiving and processing specimens for microbiological examination. In addition to generating results for patients, hospital epidemiological data that contribute to local infection control programs must be a value-added component of the service. A major obstacle for independent laboratories to make a significant contribution to risk management is the current reimbursement system, which makes it economically impossible for independent laboratories to support infection control programs in healthcare institutions.

Supplementary Annuity Program Patterns among CUPA Member Institutions.

ERIC Educational Resources Information Center

Strickler, Lester B.; Widicus, Wilbur W.

1981-01-01

A survey of institutions' policies regarding supplementary annuity programs revealed information about program administration, eligibility, investment instruments, companies, admission patterns and policies, marketing controls, employee counseling, and information dissemination. (MSE)

76 FR 3641 - National Cancer Institute; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... Training Review Branch, Division of Extramural Activities, National Cancer Institute, 6116 Executive... Biology Research; 93.397, Cancer Centers Support; 93.398, Cancer Research Manpower; 93.399, Cancer Control...

Computational fluid dynamic modeling of a medium-sized surface mine blasthole drill shroud

PubMed Central

Zheng, Y.; Reed, W.R.; Zhou, L.; Rider, J.P.

2016-01-01

The Pittsburgh Mining Research Division of the U.S. National Institute for Occupational Safety and Health (NIOSH) recently developed a series of models using computational fluid dynamics (CFD) to study airflows and respirable dust distribution associated with a medium-sized surface blasthole drill shroud with a dry dust collector system. Previously run experiments conducted in NIOSH’s full-scale drill shroud laboratory were used to validate the models. The setup values in the CFD models were calculated from experimental data obtained from the drill shroud laboratory and measurements of test material particle size. Subsequent simulation results were compared with the experimental data for several test scenarios, including 0.14 m3/s (300 cfm) and 0.24 m3/s (500 cfm) bailing airflow with 2:1, 3:1 and 4:1 dust collector-to-bailing airflow ratios. For the 2:1 and 3:1 ratios, the calculated dust concentrations from the CFD models were within the 95 percent confidence intervals of the experimental data. This paper describes the methodology used to develop the CFD models, to calculate the model input and to validate the models based on the experimental data. Problem regions were identified and revealed by the study. The simulation results could be used for future development of dust control methods for a surface mine blasthole drill shroud. PMID:27932851

Dominance of ENSO-Like Variability in Controlling Tropical Ocean Surface Energy Fluxes in the Satellite Era

NASA Technical Reports Server (NTRS)

Robertson, F. R.; Miller, T. L.; Bosilovich, M. G.

2008-01-01

Ocean surface turbulent and radiative fluxes are critical links in the climate system since they mediate energy exchange between the two fluid systems (ocean and atmosphere) whose combined heat transport determines the basic character of Earth's climate. Moreover, interannual to decadal climate variability depends crucially on the nature of these exchange processes. For example, addressing the question of the degree to which the global hydrologic cycle is changing depends on our ability to observe and model these fluxes accurately. In this work we investigate the interannual to decadal variation of fluxes over the global tropics, especially the tropical oceans. Recent versions of satellite-derived fresh water flux estimates as well as some reanalyses (e.g. products from Remote Sensing Systems, the Woods Hole Oceanographic Institute, and Global Precipitation Climatology Project) suggest that increases in evaporation and precipitation over the past 20 years exceed those expected on the basis of climate model projected responses to greenhouse gas forcing. At the same time, it is well known that E1 Nino / Southern Oscillation behavior in the Pacific exhibits significant variability at scales longer than interannual. We examine here the degree to which surface fluxes attending these interannual to decadal fluctuations are related to ENSO. We examine consistency between these data sets and explore relationships between SST variations, flux changes and modulation of tropical Walker and Hadley circulations.

NPS Government Purchase Card Program: An Analysis of Internal Controls

DTIC Science & Technology

2014-03-18

Management Division CH Cardholder COSO Committee of Sponsoring Organization of the Treadway Commission CNO Chief of Naval Operations DAU Defense...2). To minimize risks , the management and internal controls should have support from higher levels, expect integrity and ethical behavior from...Financial Executives International (FEI); The Institute of Management Accountants (IMA); and the Institute of Internal Auditors (IIA; COSO , n.d.-b

Risk Factors of Occupational Fraud: A Study of Member Institutions of the National Association of Independent Colleges and Universities

ERIC Educational Resources Information Center

Ten Napel, Karmen

2013-01-01

Available data indicate that colleges and universities have experienced an unexpected rise in occupational fraud over the past two decades. In order to mitigate the risk of fraud, these institutions must be proactive and have strong internal controls and policies. The purpose of this study was to examine the current controls in place at Midwest…

Remediation by Natural Attenuation Treatability Study for Operable Unit 5

DTIC Science & Technology

1997-12-01

remaining as a result of all attenuation processes is equivalent to the fraction of contaminant remaining as a result of non - destructive attenuation...Alternative 1-- RNA Combined with LTM, Institutional Controls , Air Sparging Along Main Street, and Groundwater Extraction and Treatment Near Well Pair MW137...MW138 .............................. 6-4 6.3.2 Alternative 2 -- RNA, LTM, Institutional Controls , Air Sparging along Main Street, Groundwater

Biofouling on Reservoir in Sea Water

NASA Astrophysics Data System (ADS)

Yoon, H.; Eom, C.; Kong, M.; Park, Y.; Chung, K.; Kim, B.

2011-12-01

The organisms which take part in marine biofouling are primarily the attached or sessile forms occurring naturally in the shallower water along the coast [1]. This is mainly because only those organisms with the ability to adapt to the new situations created by man can adhere firmly enough to avoid being washed off. Chemical and microbiological characteristics of the fouling biofilms developed on various surfaces in contact with the seawater were made. The microbial compositions of the biofilm communities formed on the reservoir polymer surfaces were tested for. The quantities of the diverse microorganisms in the biofilm samples developed on the prohibiting polymer reservoir surface were larger when there was no concern about materials for special selection for fouling. To confirm microbial and formation of biofilm on adsorbents was done CLSM (Multi-photon Confocal Laser Scanning Microscope system) analysis. Microbial identified using 16S rRNA. Experiment results, five species which are Vibrio sp., Pseudoalteromonas, Marinomonas, Sulfitobacter, and Alteromonas discovered to reservoir formed biofouling. There are some microorganism cause fouling and there are the others control fouling. The experimental results offered new specific information, concerning the problems in the application of new material as well as surface coating such as anti-fouling coatings. They showed the important role microbial activity in fouling and corrosion of the surfaces in contact with the any seawater. Acknowledgement : This research was supported by the national research project titled "The Development of Technology for Extraction of Resources Dissolved in Seawater" of the Korea Institute of Geoscience and Mineral Resources (KIGAM) funded by the Ministry of Land, Transport and Maritime Affairs. References [1] M. Y. Diego, K. Soren, and D. J. Kim. Prog. Org. Coat. 50, (2004) p.75-104.

Planetary surface reactor shielding using indigenous materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houts, Michael G.; Poston, David I.; Trellue, Holly R.

The exploration and development of Mars will require abundant surface power. Nuclear reactors are a low-cost, low-mass means of providing that power. A significant fraction of the nuclear power system mass is radiation shielding necessary for protecting humans and/or equipment from radiation emitted by the reactor. For planetary surface missions, it may be desirable to provide some or all of the required shielding from indigenous materials. This paper examines shielding options that utilize either purely indigenous materials or a combination of indigenous and nonindigenous materials. {copyright} {ital 1999 American Institute of Physics.}

Exploring the interior structure of Venus with balloons and satellites

NASA Astrophysics Data System (ADS)

Mimoun, David; Cutts, Jim; Stevenson, Dave

2015-04-01

Although present daily in our sky as the brightest object at dusk and dawn, many characteristics of Venus remains a mystery. Its dense atmosphere hides the surface from orbital viewing, and the extreme conditions experienced at its surface (460°C, almost 100 bar of pressure at the surface) pose a formidable challenge to the sustained survival and operation of planetary landers. Despite their sharply contrasting atmospheres, Venus is not very different from Earth in size, its composition should be very similar, its orbit is very close to be circular and it is only a little closer to the Sun ( 0.7 A.U). So what are the processes that turned the twin sister of our planet into such a different object? And how can we better understand the processes that have shaped the terrestrial planets, and to understand their formation history? With its harsh surface environment, conventional seismology on Venus, requiring seismometers to be deployed at the surface for months or even years seems impractical. In June 2014, the Keck Institute for Space Studies (KISS) at the California Institute of Technology sponsored a one-week workshop with 30 specialists in the key techniques and technologies relevant to investigating Venus's interior structure focusing on alternative approaches to seismology . As the vertical component of surface motion on Venus is very efficiently coupled into the atmosphere as infrasonic waves, especially at low frequency, several alternative approaches to detecting seismic events can be considered. Seismo-acoustic waves propagate upwards producing pressure fluctuations in the middle atmosphere of Venus and the seismic wave energy is ultimately dissipated by local heating, ionospheric perturbation, or airglow. These atmospheric perturbations can therefore be recorded either in-situ (with a barometer network, deployed on balloons floating in the cloud layer near 55 km) or remotely via optical imaging or electromagnetic sounding deployed on a spacecraft. A report, describing the findings of a workshop, sponsored by the Keck Institute of Space Studies (KISS), concludes that seismic investigations can be successfully conducted from all three vantage points - surface, middle atmosphere and space; these three vantage points being complementary in the information they provide. These novel techniques open a new window for the exploration of the interior structure of Venus, and enables a roadmap leading to a dedicated geophysical mission to our sister planet.

An integrated approach for estimation of methane emissions from wetlands and lakes in high latitude regions

NASA Astrophysics Data System (ADS)

Chiu, C.; Bowling, L. C.; Podest, E.; Bohn, T. J.; Lettenmaier, D. P.; Schroeder, R.; McDonald, K. C.

2009-04-01

In recent years, there has been increasing evidence of significant alteration in the extent of lakes and wetlands in high latitude regions due in part to thawing permafrost, as well as other changes governing surface and subsurface hydrology. Methane is a 23 times more efficient greenhouse gas than carbon dioxide; changes in surface water extent, and the associated subsurface anaerobic conditions, are important controls on methane emissions in high latitude regions. Methane emissions from wetlands vary substantially in both time and space, and are influenced by plant growth, soil organic matter decomposition, methanogenesis, and methane oxidation controlled by soil temperature, water table level and net primary productivity (NPP). The understanding of spatial and temporal heterogeneity of surface saturation, thermal regime and carbon substrate in northern Eurasian wetlands from point measurements are limited. In order to better estimate the magnitude and variability of methane emissions from northern lakes and wetlands, we present an integrated assessment approach based on remote sensing image classification, land surface modeling and process-based ecosystem modeling. Wetlands classifications based on L-band JERS-1 SAR (100m) and ALOS PALSAR (~30m) are used together with topographic information to parameterize a lake and wetland algorithm in the Variable Infiltration Capacity (VIC) land surface model at 25 km resolution. The enhanced VIC algorithm allows subsurface moisture exchange between surface water and wetlands and includes a sub-grid parameterization of water table position within the wetland area using a generalized topographic index. Average methane emissions are simulated by using the Walter and Heimann methane emission model based on temporally and spatially varying soil temperature, net primary productivity and water table generated from the modified VIC model. Our five preliminary study areas include the Z. Dvina, Upper Volga, Yeloguy, Syum, and Chaya river basins. The temporally-variable inundation extent simulated by the VIC model is compared to 25 km resolution inundation products developed from combined QuikSCAT, AMSR-E and MODIS data sets covering the time period from 2002 onward. The seasonal variation in methane emissions associated with sub-grid variability in water table extent is explored between 1948 and 2006. This work was carried out at Purdue University, at the University of Washington, and at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the NASA.

76 FR 61205 - Possession, Use, and Transfer of Select Agents and Toxins; Biennial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-03

...: Adjudicated as a mental defective; alien; committed to any mental institution; controlled substance; crime... for permanent residence; mental institution; occupational exposure; recombinant and synthetic nucleic...

78 FR 26056 - National Cancer Institute; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-03

... Cancer Institute, Division of Extramural Activities, Research Programs Review Branch, 9609 Medical Center... Biology Research; 93.397, Cancer Centers Support; 93.398, Cancer Research Manpower; 93.399, Cancer Control...

78 FR 26055 - National Cancer Institute; Notice of Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-03

... Logistics Branch, Division of Extramural Activities, National Cancer Institute, NIH, 9609 Medical Center... Biology Research; 93.397, Cancer Centers Support; 93.398, Cancer Research Manpower; 93.399, Cancer Control...

Blowing momentum and duty cycle effect on aerodynamic performance of flap by pulsed blowing

NASA Astrophysics Data System (ADS)

Zhou, Ping; Wang, Yankui; Wang, Jinjun; Sha, Yongxiang

2017-04-01

Control surface, which is often located in the trailing edge of wings, is important in the attitude control of an aircraft. However, the efficiency of the control surface declines severely under the high deflect angle of the control surface because of the flow separation. To improve the efficiency of control surface, this study discusses a flow-control technique aimed at suppressing the flow separation by pulsed blowing at the leading edge of the control surface. Results indicated that flow separation over the control surface can be suppressed by pulsed blowing, and the maximum average lift coefficient of the control surface can be 95% times higher than that of without blowing when average blowing momentum coefficient is 0.03 relative to that of without blowing. Finally, this study shows that the average blowing momentum coefficient and non-dimensional frequency of pulsed blowing are two of the key parameters of the pulsed blowing control technique. Otherwise, duty cycle also has influence on the effect of pulsed blowing. Numerical simulation is used in this study.

12 CFR 225.176 - How do the statutory cross marketing and sections 23A and B limitations apply to merchant banking...

Code of Federal Regulations, 2010 CFR

2010-01-01

... investments? (a) Are cross marketing activities prohibited?—(1) In general. A depository institution, including a subsidiary of a depository institution, controlled by a financial holding company may not: (i...) of this section, a subsidiary of a depository institution does not include a financial subsidiary...

1977 Florida Statewide Conference on Institutional Research. The Shift in Decision Making Responsibilities: Institutional Research Response.

ERIC Educational Resources Information Center

Strenglein, Denise, Ed.

Centralized control of budgets and programs, a growing consumerism among students, and collective bargaining are among the issues addressed in a Florida statewide conference on institutional research. papers and reports include: the keynote address; a legislative workshop; a collective bargaining panel; The New College Story as Told by 103 Alumni…

Earned Degrees Conferred: 1969-70 Summary Data.

ERIC Educational Resources Information Center

Hooper, Mary Evans

This document presents a report of earned degrees conferred by institutions of higher education in the United States in 1969-1970. Some of the highlights of the report include: (1) 1,072,581 degrees were conferred at the bachelor's and higher levels at 1,617 institutions; (2) publically controlled institutions awarded 65% of all degrees; (3)…

Risks and Risk-Based Regulation in Higher Education Institutions

ERIC Educational Resources Information Center

Huber, Christian

2009-01-01

Risk-based regulation is a relatively new mode of governance. Not only does it offer a way of controlling institutions from the outside but it also provides the possibility of making an organisation's achievements visible/visualisable. This paper comments on a list of possible risks that higher education institutions have to face. In a second…

Scale-Dependent Manganese Leaching from Stainless Steel Impacts Terminal Galactosylation in Monoclonal Antibodies.

PubMed

Williamson, Jenna; Miller, Jennifer; McLaughlin, Joseph; Combs, Rodney; Chu, Chia

2018-06-08

N-linked glycosylation profiles are routinely characterized on mammalian-derived protein therapeutic products and achieving consistency in the product-associated glycan attributes is an important indicator that the manufacturing process is under control. More importantly, meeting target glycan profile is a common criterion for ensuring product efficacy. During laboratory process development and subsequent scale up for pilot demonstration for a monoclonal antibody program, discrepancies in the molecule's terminal galactosylation level at 2-L, 100-L, and 6000-L scales were observed. Results from extensive investigations revealed the root cause as manganese leaching from the stainless steel components and that this leaching is dependent on exposed surface area and cultivation time. Although this metal impurity is only present at nanomolar concentrations and difficult to detect, a spike-in study demonstrated that this low level was sufficient to impact the protein glycosylation profiles. Surprisingly, the 2-L glass bioreactor setup exhibited the highest amount of exposure to stainless steel and resulted in both a greater degree of variability and higher overall levels of terminal galactosylation. The use of disposable vessels to minimize stainless steel surface exposure to the cell culture resulted in comparable terminal galactosylation levels to those measured in pilot and commercial bioreactors. The discovery of this leachable effect on the cell culture production process was an essential step in implementing appropriate process control. This article is protected by copyright. All rights reserved. © 2018 American Institute of Chemical Engineers.

[Zero citation of Russian institute publications on the psychiatry and addiction].

PubMed

Nemtsov, A V; Kuznetsova-Moreva, E A

To evaluate the zero-citation sizes. Based on the data of the Russian Science Citation Index the publication activity of four leading institutes in the field of Psychiatry and Addiction is analyzed. The same indices in the field of Neurology were used as a control. Number and percentage of publications with ≥1 citations and zero-citation were analyzed. It has been shown that in psychiatric science zero citation rate is quite high (from 32.8% to 47.2%, an average of 42.9%). It is higher compared to the control. Zero-citation indicator is essential to evaluate the effectiveness of scientific institutions.

A new composite adaptive controller featuring the neural network and prescribed sliding surface with application to vibration control

NASA Astrophysics Data System (ADS)

Phu, Do Xuan; Huy, Ta Duc; Mien, Van; Choi, Seung-Bok

2018-07-01

This work proposes a novel composite adaptive controller based on the prescribed performance of the sliding surface and applies it to vibration control of a semi-active vehicle seat suspension system subjected to severe external disturbances. As a first step, the online fast interval type 2 fuzzy neural network system is adopted to establish a model and two sliding surfaces are used; conventional surface and prescribed surface. Then, an equivalent control is determined by assuming the derivative of the prescribed surface is zero, followed by the design of a controller which can guarantee both stability and robustness. Then, two controllers are combined and integrated with adaptation laws using the projection algorithm. The effectiveness of the proposed composite controller is validated through both simulation and experiment by undertaking vibration control of a semi-active seat suspension system equipped with a magneto-rheological (MR) damper. It is shown from both simulation and experimental realization that excellent vibration control performances are achieved with a small tracking error between the proposed and prescribed objectives. In addition, the control superiority of the proposed controller to conventional sliding mode controller featuring one sliding surface and proportional-integral-derivative (PID) controllers are demonstrated through a comparative work.

Relationship between the Chinese tobacco industry and academic institutions in China

PubMed Central

Gan, Quan; Glantz, Stanton A

2011-01-01

Objective To investigate the relationship between the Chinese tobacco industry and academic institutions in China. Methods We searched online databases of journal articles published in both Chinese and English for academic institutions in China conducting research with or sponsored by Chinese tobacco companies. We also searched the websites of tobacco companies, their affiliated institutions and academic institutions for reports of collaborations. Results The Chinese tobacco industry, in addition to its own strong tobacco research capacity, maintains close ties with an extensive network of academic research institutions and universities to provide both research and training. The Chinese tobacco industry relies heavily upon academic researchers to advance its research agenda and such reliance has grown over time. Most research deals with farming, manufacturing and management issues, but research on ‘reduced harm’ and health effects has increased from 1% of projects in 1983–1987 to 4% in 2003–2007. Conclusions Chinese academic institutions should consider the fact that engagement with the tobacco industry, particularly on issues related to health or promotion of tobacco products, could damage their reputations, a concern that has led many leading Western universities to eschew relationships with the tobacco industry. To the extent that the Chinese tobacco industry’s involvement in academic institutions affects tobacco control policy making; it violates Article 5.3 of Framework Convention on Tobacco Control, which China ratified in 2005. PMID:20952560

Analysis of technical university information system

NASA Astrophysics Data System (ADS)

Savelyev, N. A.; Boyarkin, M. A.

2018-05-01

The paper covers a set and interaction of the existing higher education institution automated control systems in φ state budgetary educational institution of higher professional education "Industrial University of Tyumen ". A structural interaction of the existing systems and their functions has been analyzed which has become a basis for identification of a number of system-related and local (related to separate modules) drawbacks of the university activities automation. The authors suggested a new structure of the automated control system, consisting of three major subsystems: management support; training and methodology support; distance and supplementary education support. Functionality for each subsystem has been defined in accordance with the educational institution automation requirements. The suggested structure of the ACS will solve the challenges facing the university during reorganization and optimization of the processes of management of the institution activities as a whole.

General principles of institutional risks influence on pension systems

NASA Astrophysics Data System (ADS)

Nepp, A. N.; Shilkov, A. A.; Sheveleva, A. Y.; Mamedbakov, M. R.

2016-12-01

This paper examines the tools used to study the influence of institutional factors on investment returns. The research object are the tools used in the evaluation of institutional risks in the pension system, in particular, the correlation model of factors impacting on the `anti-director' index, econometric estimates combining the different determinants of savings, the model of endogenous institutional change, etc. Research work focusing on issues of institutional factors affecting pension systems (authored by La Porta, Guiso, Gianetti, El-Mekkaouide Freitas, Neyapti B., and others) is reviewed. The model is examined in terms of the impact of institutional risks on pension systems, especially with regard to the funded part. The study identified the following factors that affect financial institutions, including pension institutions: management quality, regulation quality, rule of law, political stability, and corruption control.

Investigation and modeling of the effects of light spectrum and incident angle on the growth of Chlorella vulgaris in photobioreactors.

PubMed

Souliès, Antoine; Legrand, Jack; Marec, Hélène; Pruvost, Jérémy; Castelain, Cathy; Burghelea, Teodor; Cornet, Jean-François

2016-03-01

An in-depth investigation of how various illumination conditions influence microalgal growth in photobioreactors (PBR) has been presented. Effects of both the light emission spectrum (white and red) and the light incident angle (0° and 60°) on the PBR surface were investigated. The experiments were conducted in two fully controlled lab-scale PBRs, a torus PBR and a thin flat-panel PBR for high cell density culture. The results obtained in the torus PBR were used to build the kinetic growth model of Chlorella vulgaris taken as a model species. The PBR model was then applied to the thin flat-panel PBR, which was run with various illumination conditions. Its detailed representation of local rate of photon absorption under various conditions (spectral calculation of light attenuation, incident angle influence) enabled the model to take into account all the tested conditions with no further adjustment. This allowed a detailed investigation of the coupling between radiation field and photosynthetic growth. Effects of all the radiation conditions together with pigment acclimation, which was found to be relevant, were investigated in depth. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:247-261, 2016. © 2016 American Institute of Chemical Engineers.

Industrial Internet of Things: (IIoT) applications in underground coal mines.

PubMed

Zhou, C; Damiano, N; Whisner, B; Reyes, M

2017-12-01

The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure.

Industrial Internet of Things

PubMed Central

Zhou, C.; Damiano, N.; Whisner, B.; Reyes, M.

2017-01-01

The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure. PMID:29348699

[Organization of medical specialization in cervical cancer and its control in Brazil: the Instituto de Ginecologia in Rio de Janeiro in the mid-twentieth century].

PubMed

Lana, Vanessa

2016-01-01

Instituto de Ginecologia (Institute of Gynecology), in Rio de Janeiro, headed by Dr. Arnaldo de Moraes, was the first institution in Brazil to introduce and divulge medical techniques for the control of cervical cancer in the mid-1900s. It became a benchmark for actions geared towards the disease at the time, organizing a specific diagnostic procedure that set Brazilian medicine apart in the field, in which it remained a leader until the 1970s. The aim of this text is to discuss the organization and running of the institution from two perspectives: its role in enhancing the position of gynecology as a medical specialty, and its role in spreading a standard practice for the control of cervical cancer.

Structure of high-index GaAs surfaces - the discovery of the stable GaAs(2511) surface

NASA Astrophysics Data System (ADS)

Jacobi, K.; Geelhaar, L.; Márquez, J.

We present a brief overview of surface structures of high-index GaAs surfaces, putting emphasis on recent progress in our own laboratory. By adapting a commercial scanning tunneling microscope (STM) to our molecular beam epitaxy and ultra high vacuum analysis chamber system, we have been able to atomically resolve the GaAs( {1} {1} {3})B(8 ×1), (114)Aα2(2×1), (137), (3715), and (2511) surface structures. In cooperation with P. Kratzer and M. Scheffler from the Theory Department of the Fritz-Haber Institute we determined the structure of some of these surfaces by comparing total-energy calculations and STM image simulations with the atomically resolved STM images. We present the results for the {112}, {113}, and {114} surfaces. Then we describe what led us to proceed into the inner parts of the stereographic triangle and to discover the hitherto unknown stable GaAs(2511) surface.

Experimental power spectral density analysis for mid- to high-spatial frequency surface error control.

PubMed

Hoyo, Javier Del; Choi, Heejoo; Burge, James H; Kim, Geon-Hee; Kim, Dae Wook

2017-06-20

The control of surface errors as a function of spatial frequency is critical during the fabrication of modern optical systems. A large-scale surface figure error is controlled by a guided removal process, such as computer-controlled optical surfacing. Smaller-scale surface errors are controlled by polishing process parameters. Surface errors of only a few millimeters may degrade the performance of an optical system, causing background noise from scattered light and reducing imaging contrast for large optical systems. Conventionally, the microsurface roughness is often given by the root mean square at a high spatial frequency range, with errors within a 0.5×0.5  mm local surface map with 500×500 pixels. This surface specification is not adequate to fully describe the characteristics for advanced optical systems. The process for controlling and minimizing mid- to high-spatial frequency surface errors with periods of up to ∼2-3  mm was investigated for many optical fabrication conditions using the measured surface power spectral density (PSD) of a finished Zerodur optical surface. Then, the surface PSD was systematically related to various fabrication process parameters, such as the grinding methods, polishing interface materials, and polishing compounds. The retraceable experimental polishing conditions and processes used to produce an optimal optical surface PSD are presented.

Hygiene training of food handlers in hospital settings: important factor in the prevention of nosocomial infections.

PubMed

Lazarević, Konstansa; Stojanović, Dusica; Bogdanović, Dragan; Dolićanin, Zana

2013-09-01

The aim of this study was to evaluate the effects of food hygiene training of food handlers on sanitary-hygienic conditions in hospital kitchens, based on microbiological analysis of smears taken in hospital kitchens. The study was conducted in the 1995-2009 period at the Clinical Centre Nis, Serbia. The food hygiene training was conducted in February 2005, by an infection control officer. 1,076 smears in the central kitchen and 4,025 smears in distributive kitchens were taken from hands and work clothes, work surfaces, equipment, and kitchen utensils. Microbiological analysis of smears was carried out in an accredited laboratory of the Public Health Institute Nis (Serbia). A significantly lower percentage of smears with isolates of bacteria (p < 0.001) taken from hands and work clothes, work surfaces, equipment and kitchen utensils in the central and distributive kitchens was observed in the period following the food safety education programme (2005-2009). The most commonly isolated bacteria was: Enterobacter spp., Acinetobacter spp., Citrobacter spp., and E. coli. Our results confirmed that food hygiene training improved hygiene and is also an important component for the prevention of nosocomial infection.

Cleaved CD147 shed from the surface of malignant melanoma cells activates MMP2 produced by fibroblasts.

PubMed

Hatanaka, Miho; Higashi, Yuko; Fukushige, Tomoko; Baba, Naoko; Kawai, Kazuhiro; Hashiguchi, Teruto; Su, Juan; Zeng, Weiqi; Chen, Xiang; Kanekura, Takuro

2014-12-01

Cluster of differentiation 147 (CD147)/basigin on the malignant tumor cell surface is critical for tumor proliferation, invasiveness, metastasis, and angiogenesis. CD147 expressed on malignant melanoma cells can induce tumor cell invasion by stimulating the production of matrix metalloproteinases (MMPs) by surrounding fibroblasts. Membrane vesicles, microvesicles and exosomes have attracted attention, as vehicles of functional molecules and their association with CD147 has been reported. Cleaved CD147 fragments released from tumor cells were reported to interact with fibroblasts. We investigated the intercellular mechanisms by which CD147 stimulates fibroblasts to induce MMP2 activity. CD147 was knocked-down using short hairpin RNA (shRNA). The stimulatory effect of CD147 in cell culture supernatants, microvesicles, and exosomes on the enzymatic activity of MMP2 was examined by gelatin zymography. Supernatants from A375 control cells induced increased enzymatic activity of fibroblasts; such activity was significantly lower in CD147 knock-down cells. Cleaved CD147 plays a pivotal role in stimulating fibroblasts to induce MMP2 activity. Copyright© 2014 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

Alternative aggregates and materials for high friction surface treatments : [summary].

DOT National Transportation Integrated Search

2016-07-01

Researchers at the Texas A&M Transportation Institute studied the materials and practices that best eliminate premature HFST failures and reduce overall HFST costs, while maintaining or improving treatment life and friction performance.

Mars Surface Mission Workshop

NASA Technical Reports Server (NTRS)

Duke, M. B. (Editor)

1997-01-01

A workshop was held at the Lunar and Planetary Institute on September 4-5, 1997, to address the surface elements of the Mars Reference Mission now being reviewed by NASA. The workshop considered the current reference mission and addressed the types of activities that would be expected for science and resource exploration and facilities operations. A set of activities was defined that can be used to construct "vignettes" of the surface mission. These vignettes can form the basis for describing the importance of the surface mission, for illustrating aspects of the surface mission, and for allowing others to extend and revise these initial ideas. The topic is rich with opportunities for additional conceptualization. It is recommended that NASA consider supporting university design teams to conduct further analysis of the possibilities.

Land-Grant Status for Certain Indian Colleges. Report To Accompany S. 1345 from the Committee on Indian Affairs, United States Senate, 103d Congress, 1st Session (November 2, 1993).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Indian Affairs.

This report provides background on Senate Bill 1345 to establish land-grant status for 24 tribally controlled community colleges, 2 tribally controlled vocational colleges, 2 Bureau of Indian Affairs postsecondary institutions, and the Institute of American Indian Arts. Brief sections describe the history of the 73 existing land-grant…

Chemical Preparation Laboratory for IND Candidate Compounds

DTIC Science & Technology

1989-01-31

were prepared in strict compliance with "Current Good Manufacturing Procedures" (CGMP) guidelines. All inter- mediates and final products unreported...TO U.S. ARMY MEDICAL RESARCH INSTITUTE OF INFECTIOUS DISEASES (USANRIID) JANUARY 17. 1938 TO JANUARY 16. 1989 Production N.Compound Amount Control No...RESARCH INSTITUTE OF INFECTIOUS DISEASES (USAMRIID) JANUARY 17. 1988 TO JANUARY 16. 1989. Continued Production No. Compound Amount Control No. AVS 206 l-$-D

Computer-Mediated Group Processes in Distributed Command and Control Systems

DTIC Science & Technology

1988-06-01

Linville, "Michael J. Liebhaber, and Richard W. Obermayer Vreuls Corporation Jon J. Fallesen Army Research Institute DTIC SELECTEr • AUG I 1. 1988 ARI...control staffs who will operate in a computer- mediated environment. The Army Research Institute has initiated research to examine selected issues...computar-mediated group processes is needed. Procedure: The identification and selection of key research issues followed a three- step procedure. Previous

Feasibility of detecting aflatoxin B1 on inoculated maize kernels surface using Vis/NIR hyperspectral imaging.

PubMed

Wang, Wei; Heitschmidt, Gerald W; Windham, William R; Feldner, Peggy; Ni, Xinzhi; Chu, Xuan

2015-01-01

The feasibility of using a visible/near-infrared hyperspectral imaging system with a wavelength range between 400 and 1000 nm to detect and differentiate different levels of aflatoxin B1 (AFB1 ) artificially titrated on maize kernel surface was examined. To reduce the color effects of maize kernels, image analysis was limited to a subset of original spectra (600 to 1000 nm). Residual staining from the AFB1 on the kernels surface was selected as regions of interest for analysis. Principal components analysis (PCA) was applied to reduce the dimensionality of hyperspectral image data, and then a stepwise factorial discriminant analysis (FDA) was performed on latent PCA variables. The results indicated that discriminant factors F2 can be used to separate control samples from all of the other groups of kernels with AFB1 inoculated, whereas the discriminant factors F1 can be used to identify maize kernels with levels of AFB1 as low as 10 ppb. An overall classification accuracy of 98% was achieved. Finally, the peaks of β coefficients of the discrimination factors F1 and F2 were analyzed and several key wavelengths identified for differentiating maize kernels with and without AFB1 , as well as those with differing levels of AFB1 inoculation. Results indicated that Vis/NIR hyperspectral imaging technology combined with the PCA-FDA was a practical method to detect and differentiate different levels of AFB1 artificially inoculated on the maize kernels surface. However, indicated the potential to detect and differentiate naturally occurring toxins in maize kernel. © 2014 Institute of Food Technologists®

Integration and disease control: notes from the Prince Leopold Institute of Tropical Medicine Colloquium 2002.

PubMed

Mahendradhata, Yodi; Moerman, Filip

2004-06-01

The discussion on the desirability or not to integrate disease control activities with general health services is a longstanding one. The recent creations of global health initiatives for poverty-related disease control have refueled the debate. The Prince Leopold Institute of Tropical Medicine (ITM) convened a colloquium in Antwerp to clarify concepts involved in integrated disease control and contribute to the creation of a common scientific language and a better understanding of the issues at stake. We present an overview of highlights from the colloquium sessions. Some of the contributions reported here are presented in more detail elsewhere in this special issue.

Vibration welding system with thin film sensor

DOEpatents

Cai, Wayne W; Abell, Jeffrey A; Li, Xiaochun; Choi, Hongseok; Zhao, Jingzhou

2014-03-18

A vibration welding system includes an anvil, a welding horn, a thin film sensor, and a process controller. The anvil and horn include working surfaces that contact a work piece during the welding process. The sensor measures a control value at the working surface. The measured control value is transmitted to the controller, which controls the system in part using the measured control value. The thin film sensor may include a plurality of thermopiles and thermocouples which collectively measure temperature and heat flux at the working surface. A method includes providing a welder device with a slot adjacent to a working surface of the welder device, inserting the thin film sensor into the slot, and using the sensor to measure a control value at the working surface. A process controller then controls the vibration welding system in part using the measured control value.

Capacity Building for Sustainable Seismological Networks in the Americas: A Pan-American Advanced Studies Institute on New Frontiers in Seismological Research

NASA Astrophysics Data System (ADS)

Cabello, O. A.; Meltzer, A.; Sandvol, E. A.; Yepes, H.; Ruiz, M. C.; Barrientos, S. E.; Willemann, R. J.

2011-12-01

During July 2011, a Pan-American Advanced Studies Institute, "New Frontiers in Seismological Research: Sustainable Networks, Earthquake Source Parameters, and Earth Structure" was conducted in Quito Ecuador with participants from the US, Central, and South America, and the Caribbean at early stages in their scientific careers. This advanced studies institute was imparted by fifteen volunteer senior faculty and investigators from the U.S. and the Americas. The curriculum addressed the importance of developing and maintaining modern seismological observatories, reviewed the principles of sustainable network operations, and explored recent advances in the analysis of seismological data in support of basic research, education, and hazard mitigation. An additional goal was to develop future international research collaborations. The Institute engaged graduate students, post-doctoral students, and new faculty from across the Americas in an interactive collaborative learning environment including modules on double-difference earthquake location and tomography, regional centroid-moment tensors, and event-based and ambient noise surface wave dispersion and tomography. Under the faculty guidance, participants started promising research projects about surface wave tomography in southeastern Brazil, near the Chilean triple junction, in central Chilean Andes, at the Peru-Chile border, within Peru, at a volcano in Ecuador, in the Caribbean Sea region, and near the Mendocino triple junction. Other participants started projects about moment tensors of earthquakes in or near Brazil, Chile and Argentina, Costa Rica, Ecuador, Puerto Rico, western Mexico, and northern Mexico. In order to track the progress of the participants and measure the overall effectiveness of the Institute a reunion is planned where the PASI alumni will present the result of their research that was initiated in Quito

Hydrodynamically Lubricated and Grooved Biomimetic Self-Adapting Surfaces

PubMed Central

Jackson, Robert L.; Lei, Jiang

2014-01-01

In many machines and mechanical components, there is a need for new bearing technologies to reduce friction and wear, and provide precision control of motion when the load is varied. This can be provided by electronically controlled actuators and sensors on the surfaces, but then the system reliability can be an issue. In contrast, biomimetic surfaces can be created that adapt mechanically to variations in load. This work uses numerical methods to research the use of self-adapting surfaces for bearings that are based on the deformable nature of biological materials such as articular cartilage. These surfaces are designed to change their profiles to achieve a desired behavior, without any external control. The surfaces change their profile to control the film height and tilt of the bearing to a near constant value for different loads. If the surfaces are tilted, the grooved self-adapting surfaces will also react with a larger restoring moment than a conventional grooved surface. These surfaces could be beneficial to applications where electrical systems and controls are not feasible. PMID:24956441

Hydrodynamically lubricated and grooved biomimetic self-adapting surfaces.

PubMed

Jackson, Robert L; Lei, Jiang

2014-06-04

In many machines and mechanical components, there is a need for new bearing technologies to reduce friction and wear, and provide precision control of motion when the load is varied. This can be provided by electronically controlled actuators and sensors on the surfaces, but then the system reliability can be an issue. In contrast, biomimetic surfaces can be created that adapt mechanically to variations in load. This work uses numerical methods to research the use of self-adapting surfaces for bearings that are based on the deformable nature of biological materials such as articular cartilage. These surfaces are designed to change their profiles to achieve a desired behavior, without any external control. The surfaces change their profile to control the film height and tilt of the bearing to a near constant value for different loads. If the surfaces are tilted, the grooved self-adapting surfaces will also react with a larger restoring moment than a conventional grooved surface. These surfaces could be beneficial to applications where electrical systems and controls are not feasible.

Developing Adaptive Training in the Classroom

DTIC Science & Technology

2009-09-01

change to a training course: a pretest / posttest design and the use of control groups.39 The pretest / posttest comparison would entail administering the...U.S. Army Research Institute for the Behavioral and Social Sciences Research Product 2009-10 Developing Adaptive Training in...the Classroom Rose A. Mueller-Hanson Personnel Decisions Research Institutes, Inc. Michelle M. Wisecarver U.S. Army Research Institute

Part-Time Faculty Satisfaction at Two-Year Public Postsecondary Institutions: A Comparison of Involuntary Part-Time, Voluntary Part-Time, and Full-Time Faculty

ERIC Educational Resources Information Center

Kinchen, Nancy Huval

2010-01-01

Part-time faculty members represent the majority of faculty at public two-year postsecondary institutions. Utilizing part-time faculty enables two-year institutions to control their instructional costs and maintain scheduling flexibility. However, part-time faculty are diverse in regards to their employment preference, some prefer part-time…

In-situ investigation of laser surface modifications of WC-Co hard metals inside a scanning electron microscope

NASA Astrophysics Data System (ADS)

Mueller, H.; Wetzig, K.; Schultrich, B.; Pompe, Wolfgang; Chapliev, N. I.; Konov, Vitaly I.; Pimenov, S. M.; Prokhorov, Alexander M.

1989-05-01

The investigation of laser interaction with solid surfaces and of the resulting mechanism of surface modification are of technical interest to optimize technological processes, and they are also of fundamental scientific importance. Most instructive indormation is available with the ail of the in-situ techniques. For instance, measuring of the photon emission of the irradiated surface ane the plasma torch (if it is produced) simultaneously to laser action, makes it possible to gain a global characterization of the laser-solid interaction. In order to obtain additional information about surface and structure modifications in microscopic detail , a laser and scanning electron microscope were combined in to a tandem equipment (LASEM). Inside this eqiipment the microscopic observation is carried out directly at the laser irradiated area without any displacement of the sample. In this way, the stepwise development of surface modification during multipulse irradiation is visible in microscopic details and much more reliable information about the surface modification process is obtainable in comparison to an external laser irradiation. Such kind of equipments were realized simultaneously and independently in the Institut of General Physics (Moscow) and the Central Institute of Solid State Physics and Material Research (Dresden) using a CO2 and a LTd-glass-laser, respectively. In the following the advantages and possibilities of a LASEM shall be demonstrated by some selected investigations of WC-CO hardmeta. The results were obtained in collaboration by both groups with the aid of the pulsed CO2-laser. The TEA CO2 laser was transmitted through a ZnSe-window into the sample chamber of the SEM and focused ofAo tfte sample surface. It was operated in TEM - oo mode with a repetition rate of about 1 pulse per second. A peak power density of about 160 MW/cm2 was achieved in front of the sample surface.

Standard Reference Specimens in Quality Control of Engineering Surfaces

PubMed Central

Song, J. F.; Vorburger, T. V.

1991-01-01

In the quality control of engineering surfaces, we aim to understand and maintain a good relationship between the manufacturing process and surface function. This is achieved by controlling the surface texture. The control process involves: 1) learning the functional parameters and their control values through controlled experiments or through a long history of production and use; 2) maintaining high accuracy and reproducibility with measurements not only of roughness calibration specimens but also of real engineering parts. In this paper, the characteristics, utilizations, and limitations of different classes of precision roughness calibration specimens are described. A measuring procedure of engineering surfaces, based on the calibration procedure of roughness specimens at NIST, is proposed. This procedure involves utilization of check specimens with waveform, wavelength, and other roughness parameters similar to functioning engineering surfaces. These check specimens would be certified under standardized reference measuring conditions, or by a reference instrument, and could be used for overall checking of the measuring procedure and for maintaining accuracy and agreement in engineering surface measurement. The concept of “surface texture design” is also suggested, which involves designing the engineering surface texture, the manufacturing process, and the quality control procedure to meet the optimal functional needs. PMID:28184115

Structural Pest Control.

ERIC Educational Resources Information Center

Kahn, M. S.; Hoffman, W. M.

This manual is designed for those who seek certification as pesticide applicators for industrial, institutional, structural, and health-related pest control. It is divided into six sections covering general pest control, wood-destroying organisms, bird control, fumigation, rodent control, and industrial weed control. The manual gives information…

A new multi-domain method based on an analytical control surface for linear and second-order mean drift wave loads on floating bodies

NASA Astrophysics Data System (ADS)

Liang, Hui; Chen, Xiaobo

2017-10-01

A novel multi-domain method based on an analytical control surface is proposed by combining the use of free-surface Green function and Rankine source function. A cylindrical control surface is introduced to subdivide the fluid domain into external and internal domains. Unlike the traditional domain decomposition strategy or multi-block method, the control surface here is not panelized, on which the velocity potential and normal velocity components are analytically expressed as a series of base functions composed of Laguerre function in vertical coordinate and Fourier series in the circumference. Free-surface Green function is applied in the external domain, and the boundary integral equation is constructed on the control surface in the sense of Galerkin collocation via integrating test functions orthogonal to base functions over the control surface. The external solution gives rise to the so-called Dirichlet-to-Neumann [DN2] and Neumann-to-Dirichlet [ND2] relations on the control surface. Irregular frequencies, which are only dependent on the radius of the control surface, are present in the external solution, and they are removed by extending the boundary integral equation to the interior free surface (circular disc) on which the null normal derivative of potential is imposed, and the dipole distribution is expressed as Fourier-Bessel expansion on the disc. In the internal domain, where the Rankine source function is adopted, new boundary integral equations are formulated. The point collocation is imposed over the body surface and free surface, while the collocation of the Galerkin type is applied on the control surface. The present method is valid in the computation of both linear and second-order mean drift wave loads. Furthermore, the second-order mean drift force based on the middle-field formulation can be calculated analytically by using the coefficients of the Fourier-Laguerre expansion.

[Assessment on the capacity for programs regarding chronic non-communicable diseases prevention and control, in China].

PubMed

Si, Xiang; Zhai, Yi; Shi, Xiaoming

2014-06-01

To assess the policies and programs on the capacity of prevention and control regarding non-communicable diseases (NCDs) at the Centers for Disease Control and Prevention (CDCs) at all levels and grass roots health care institutions, in China. On-line questionnaire survey was adopted by 3 352 CDCs at provincial, city and county levels and 1 200 grass roots health care institutions. 1) On policies: 75.0% of the provincial governments provided special funding for chronic disease prevention and control, whereas 19.7% city government and 11.3% county government did so. 2) Infrastructure:only 7.1% county level CDCs reported having a department taking care of NCD prevention and control. 8 263 staff members worked on NCDs prevention and control, accounting for 4.2% of all the CDCs' personnel. 40.2% CDCs had special funding used for NCDs prevention and control. 3)Capacity on training and guidance:among all the CDCs, 96.9% at provincial level, 50.3% at city level and 42.1% at county level had organized training on NCDs prevention and control. Only 48.3% of the CDCs at county level provided technical guidance for grass-roots health care institutions. 4) Capacities regarding cooperation and participation: 20.2% of the CDCs had experience in collaborating with mass media. 5) Surveillance capacity: 64.6% of the CDCs at county level implemented death registration, compare to less than 30.0% of CDCs at county level implemented surveillance programs on major NCDs and related risk factors. In the grass roots health care institutions, 18.6% implemented new stroke case reporting system but only 3.0% implemented program on myocardial infarction case reporting. 6) Intervention and management capacity: 36.1% and 32.2% of the CDCs conducted individualized intervention on hypertension and diabetes, while less than another 20% intervened into other NCDs and risk factors. More than 50% of the grass roots health care institutions carried follow-up survey on hypertension and diabetes. Rates on hypertension and diabetes patient management were 12.0% and 7.9% , with rates on standard management as 73.8% and 80.1% and on control as 48.7% and 50.0%, respectively. 7) Capacity on Assessment: 13.3% of the CDCs or health administrations carried out evaluation programs related to the responses on NCDs in their respective jurisdiction. 8) On scientific research: the capacity on scientific research among provincial CDCs was apparently higher than that at the city or county level CDCs. Policies for NCDs prevention and control need to be improved. We noticed that there had been a huge gap between county level and provincial/city level CDCs on capacities related to NCDs prevention and control. At the grass-roots health care institutions, both prevention and control programs on chronic diseases did not seem to be effective.

A Smart Superwetting Surface with Responsivity in Both Surface Chemistry and Microstructure.

PubMed

Zhang, Dongjie; Cheng, Zhongjun; Kang, Hongjun; Yu, Jianxin; Liu, Yuyan; Jiang, Lei

2018-03-26

Recently, smart surfaces with switchable wettability have aroused much attention. However, only single surface chemistry or the microstructure can be changed on these surfaces, which significantly limits their wetting performances, controllability, and applications. A new surface with both tunable surface microstructure and chemistry was prepared by grafting poly(N-isopropylacrylamide) onto the pillar-structured shape memory polymer on which multiple wetting states from superhydrophilicity to superhydrophobicity can be reversibly and precisely controlled by synergistically regulating the surface microstructure and chemistry. Meanwhile, based on the excellent controllability, we also showed the application of the surface as a rewritable platform, and various gradient wettings can be obtained. This work presents for the first time a surface with controllability in both surface chemistry and microstructure, which starts some new ideas for the design of novel superwetting materials. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Bibliometric analysis of literature regarding integrated schistosomiasis control strategy with emphasis on infectious source control].

PubMed

Qian, Yi-Li; Wang, Wei; Hong, Qing-Biao; Liang, You-Sheng

2014-12-01

To evaluate the outcomes of implementation of integrated schistosomiasis control strategy with emphasis on infectious source control using a bibliometric method. The literature pertaining to integrated schistosomiasis control strategy with emphasis on infectious source control was retrieved from CNKI, Wanfangdata, VIP, PubMed, Web of Science, BIOSIS and Google Scholar, and a bibliometric analysis of literature captured was performed. During the period from January 1, 2004 through September 30, 2014, a total of 94 publications regarding integrated schistosomiasis control strategy with emphasis on infectious source control were captured, including 78 Chinese articles (82.98%) and 16 English papers (17.02%). The Chinese literature was published in 21 national journals, and Chinese Journal of Schistosomiasis Control had the largest number of publications, consisting of 37.23% of total publications; 16 English papers were published in 12 international journals, and PLoS Neglected Tropical Diseases had the largest number of publications (3 publications). There were 37 affiliations publishing these 94 articles, and National Institute of Parasitic Diseases, Chinese Center for Disease Control and Prevention (16 publications), Anhui Institute of Schistosomiasis Control (12 publications) and Hunan Institute of Schistosomiasis Control (9 publications) ranked top three affiliations in number of publications. A total of 157 persons were co-authored in these 94 publications, and Wang, Zhou and Zhang ranked top 3 authors in number of publications. The integrated schistosomiasis control strategy with emphasis on infectious source control has been widely implemented in China, and the achievements obtained from the implementation of this strategy should be summarized and transmitted internationally.

[The "Instituto de Salud Carlos III" and the public health in Spain. Origin of laboratory medicine and of the central laboratories and research in public health].

PubMed

Nájera Morrondo, Rafael

2006-01-01

The "Instituto de Salud Carlos III" is the Central Public Health Laboratory in Spain with an important component of scientific research in health related areas, such as cancer, cardiovascular diseases, infectious diseases and environmental health. The article describes the development of the Public Health Institutes. arising from the introduction and development of scientific and laboratory based medicine and the introduction of vaccination and sanitation with the control of water and food. At about the same time, the discoveries in microbiology and immunology were produced, being the research activities incardinated with the practical advances in the control of products. To cope with the practical needs, Institutions were created with the responsibility of providing smallpox vaccine but incorporating very soon production of sera and other vaccines and water and sanitation control and foods control. At the same time. colonization of countries specially in Africa, South East Asia and explorations in Central America confront the Europeans with new diseases and the need of laboratories where to study them. These circumstances gave rise to the birth of the Central Public Health Laboratories and the National institutes of Health at the beginning of the XX century in many countries. In Spain, the Spanish Civil War was a breaking point in the development of such an institution that finally was reinvented with the creation of the Instituto de Salud Carlos III, in 1986, incorporating research and epidemiological surveillance and control of diseases and also the responsibilities of the Food and Drug Control, lately separated from it.

Mirror with thermally controlled radius of curvature

DOEpatents

Neil, George R.; Shinn, Michelle D.

2010-06-22

A radius of curvature controlled mirror for controlling precisely the focal point of a laser beam or other light beam. The radius of curvature controlled mirror provides nearly spherical distortion of the mirror in response to differential expansion between the front and rear surfaces of the mirror. The radius of curvature controlled mirror compensates for changes in other optical components due to heating or other physical changes. The radius of curvature controlled mirror includes an arrangement for adjusting the temperature of the front surface and separately adjusting the temperature of the rear surface to control the radius of curvature. The temperature adjustment arrangements can include cooling channels within the mirror body or convection of a gas upon the surface of the mirror. A control system controls the differential expansion between the front and rear surfaces to achieve the desired radius of curvature.

Final report of CCQM-K136 measurement of porosity properties (specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous Al2O3

NASA Astrophysics Data System (ADS)

Sobina, E.; Zimathis, A.; Prinz, C.; Emmerling, F.; Unger, W.; de Santis Neves, R.; Galhardo, C. E.; De Robertis, E.; Wang, H.; Mizuno, K.; Kurokawa, A.

2016-01-01

CCQM key comparison K-136 Measurement of porosity properties (specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous Al2O3 has been performed by the Surface Analysis Working Group (SAWG) of the Consultative Committee for Amount of Substance (CCQM). The objective of this key comparison is to compare the equivalency of the National Metrology Institutes (NMIs) and Designated Institutes (DIs) for the measurement of specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous substances (sorbents, catalytic agents, cross-linkers, zeolites, etc) used in advanced technology. In this key comparison, a commercial sorbent (aluminum oxide) was supplied as a sample. Five NMIs participated in this key comparison. All participants used a gas adsorption method, here nitrogen adsorption at 77.3 K, for analysis according to the international standards ISO 15901-2 and 9277. In this key comparison, the degrees of equivalence uncertainties for specific adsorption, BET specific surface area, specific pore volume and pore diameter was established. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Weight Loss Surgery: MedlinePlus Health Topic

MedlinePlus

... ask your doctor Your diet after gastric bypass surgery Related Health Topics Obesity Weight Control National Institutes of Health The primary NIH organization for research on Weight Loss Surgery is the National Institute of Diabetes and Digestive ...

Addressing Institutional Amplifiers in the Dynamics and Control of Tuberculosis Epidemics

PubMed Central

Basu, Sanjay; Stuckler, David; McKee, Martin

2011-01-01

Tuberculosis outbreaks originating in prisons, mines, or hospital wards can spread to the larger community. Recent proposals have targeted these high-transmission institutional amplifiers by improving case detection, treatment, or reducing the size of the exposed population. However, what effects these alternative proposals may have is unclear. We mathematically modeled these control strategies and found case detection and treatment methods insufficient in addressing epidemics involving common types of institutional amplifiers. Movement of persons in and out of amplifiers fundamentally altered the transmission dynamics of tuberculosis in a manner not effectively mitigated by detection or treatment alone. Policies increasing the population size exposed to amplifiers or the per-person duration of exposure within amplifiers potentially worsened incidence, even in settings with high rates of detection and treatment success. However, reducing the total population size entering institutional amplifiers significantly lowered tuberculosis incidence and the risk of propagating new drug-resistant tuberculosis strains. PMID:21212197

Telbivudine prevents vertical transmission of hepatitis B virus from women with high viral loads: a prospective long-term study.

PubMed

Wu, Quanxin; Huang, Hongfei; Sun, Xiaowen; Pan, Meimin; He, Yun; Tan, Shun; Zeng, Yi; Li, Li; Deng, Guohong; Yan, Zehui; He, Dengming; Li, Junnan; Wang, Yuming

2015-06-01

Hepatitis B virus (HBV) infection is a leading cause of liver diseases. We investigated the efficacy and safety of telbivudine in preventing transmission of HBV from hepatitis B e antigen-positive pregnant women with high viral loads to their infants in an open-label study. We performed a prospective study of 450 hepatitis B e antigen-positive pregnant women with HBV DNA levels greater than 10(6) IU/mL; 279 women received telbivudine (600 mg/d) during weeks 24 to 32 of gestation, and 171 women who were unwilling to take antiviral drugs participated as controls. All newborns were vaccinated with a recombinant HBV vaccine and hepatitis B immune globulin, according to a standard immunoprophylaxis procedure. Mother-to-child transmission of HBV was determined by detection of hepatitis B surface antigen and HBV DNA in the infant 6 months after birth. None of the infants whose mothers were given telbivudine tested positive for of hepatitis B surface antigen at 6 months, compared with 14.7% of infants in the control group (P = 5.317 × 10(-8)). Levels of HBV DNA also decreased among women given telbivudine; 40 of 172 (23.2%) women given telbivudine had undetectable HBV DNA levels before delivery, compared with none of the controls. A significantly higher proportion of women given telbivudine had undetectable levels of HBV DNA in cord blood (99.1%) than controls (61.5%; P = 1.195 × 10(-22)). No severe adverse events or complications were observed in women or infants. Telbivudine significantly reduces vertical transmission of HBV from pregnant women to their infants; it is safe and well tolerated by women and infants. Antiretroviral Pregnancy Registry Health Care Providers ID: 26592; Government number: Natural Science Foundation of China (NSFC) 30830090, 30972598; and Third Military Medical University Key Project for Clinical Research: 2012XLC05). Copyright © 2015 AGA Institute. Published by Elsevier Inc. All rights reserved.

Development of an analysis tool for cloud base height and visibility

NASA Astrophysics Data System (ADS)

Umdasch, Sarah; Reinhold, Steinacker; Manfred, Dorninger; Markus, Kerschbaum; Wolfgang, Pöttschacher

2014-05-01

The meteorological variables cloud base height (CBH) and horizontal atmospheric visibility (VIS) at surface level are of vital importance for safety and effectiveness in aviation. Around 20% of all civil aviation accidents in the USA from 2003 to 2007 were due to weather related causes, around 18% of which were owing to decreased visibility or ceiling (main CBH). The aim of this study is to develop a system generating quality-controlled gridded analyses of the two parameters based on the integration of various kinds of observational data. Upon completion, the tool is planned to provide guidance for nowcasting during take-off and landing as well as for flights operated under visual flight rules. Primary input data consists of manual as well as instrumental observation of CBH and VIS. In Austria, restructuring of part of the standard meteorological stations from human observation to automatic measurement of VIS and CBH is currently in progress. As ancillary data, satellite derived products can add 2-dimensional information, e.g. Cloud Type by NWC SAF (Nowcasting Satellite Application Facilities) MSG (Meteosat Second Generation). Other useful available data are meteorological surface measurements (in particular of temperature, humidity, wind and precipitation), radiosonde, radar and high resolution topography data. A one-year data set is used to study the spatial and weather-dependent representativeness of the CBH and VIS measurements. The VERA (Vienna Enhanced Resolution Analysis) system of the Institute of Meteorology and Geophysics of the University of Vienna provides the framework for the analysis development. Its integrated "Fingerprint" technique allows the insertion of empirical prior knowledge and ancillary information in the form of spatial patterns. Prior to the analysis, a quality control of input data is performed. For CBH and VIS, quality control can consist of internal consistency checks between different data sources. The possibility of two-dimensional consistency checks has to be explored. First results in the development of quality control features and fingerprints will be shown.

RLE (Research Laboratory of Electronics) Progress Report Number 129.

DTIC Science & Technology

1987-01-01

8217," ’,/’.’t MICROCOP ,"Y RESOLUTION TEST C-’HA"-/’%’.’."."% "-’- -" "."o -- - -" " OI FILE COPYAJ MASSACHUSETTS INSTITUTE OF EHOGYD The RESEARCH LABORATORY of...Intercalation Compound Structures and Transitions .................................. 59 10.0 Semiconductor Surface Studies...understanding of the HEMT, which is the basic block in building surface superlattices on III-V compound materials, our device structure has been simu

Advances in land modeling of KIAPS based on the Noah Land Surface Model

NASA Astrophysics Data System (ADS)

Koo, Myung-Seo; Baek, Sunghye; Seol, Kyung-Hee; Cho, Kyoungmi

2017-08-01

As of 2013, the Noah Land Surface Model (LSM) version 2.7.1 was implemented in a new global model being developed at the Korea Institute of Atmospheric Prediction Systems (KIAPS). This land surface scheme is further refined in two aspects, by adding new physical processes and by updating surface input parameters. Thus, the treatment of glacier land, sea ice, and snow cover are addressed more realistically. Inconsistencies in the amount of absorbed solar flux at ground level by the land surface and radiative processes are rectified. In addition, new parameters are available by using 1-km land cover data, which had usually not been possible at a global scale. Land surface albedo/emissivity climatology is newly created using Moderate-Resolution Imaging Spectroradiometer (MODIS) satellitebased data and adjusted parameterization. These updates have been applied to the KIAPS-developed model and generally provide a positive impact on near-surface weather forecasting.

Surface modification of ferritic steels using MEVVA and duoplasmatron ion sources

NASA Astrophysics Data System (ADS)

Kulevoy, Timur V.; Chalyhk, Boris B.; Fedin, Petr A.; Sitnikov, Alexey L.; Kozlov, Alexander V.; Kuibeda, Rostislav P.; Andrianov, Stanislav L.; Orlov, Nikolay N.; Kravchuk, Konstantin S.; Rogozhkin, Sergey V.; Useinov, Alexey S.; Oks, Efim M.; Bogachev, Alexey A.; Nikitin, Alexander A.; Iskandarov, Nasib A.; Golubev, Alexander A.

2016-02-01

Metal Vapor Vacuum Arc (MEVVA) ion source (IS) is a unique tool for production of high intensity metal ion beam that can be used for material surface modification. From the other hand, the duoplasmatron ion source provides the high intensity gas ion beams. The MEVVA and duoplasmatron IS developed in Institute for Theoretical and Experimental Physics were used for the reactor steel surface modification experiments. Response of ferritic-martensitic steel specimens on titanium and nitrogen ions implantation and consequent vacuum annealing was investigated. Increase in microhardness of near surface region of irradiated specimens was observed. Local chemical analysis shows atom mixing and redistribution in the implanted layer followed with formation of ultrafine precipitates after annealing.

AMS 14 C dating controlled records of monsoon and Indonesian throughflow variability from the eastern Indian Ocean of the past 32,000 years

NASA Astrophysics Data System (ADS)

Li, Z. Y.; Chen, M. T.; Shi, X.; Liu, S.; Wang, H.

2015-12-01

Zi-Ye Li a, Min-Te Chen b, Hou-Jie Wang a, Sheng-Fa Liu c, Xue-Fa Shi ca College of Marine Geosciences, Ocean University of China, Qingdao 266100, P.R. Chinab Institute of Applied Geosciences, National Taiwan Ocean University, Keelung, Taiwan 20224, ROCc First Institute of Oceanography, SOA, Qingdao 266100, P.R. China Indonesian throughflow (ITF) is one of the most important currents responsible for transporting heat and moisture from the western Pacific to the Indian Oceans. The ITF is also well-known as effectively in modulating the global climate change with the interactions among ENSO and Asian monsoons. Here we present an AMS 14C dating controlled sea surface temperature (SST) record from core SO184-10043 (07°18.57'S, 105°03.53'E), which was retrieved from 2171m water depth at a north-south depression located at the southeastern offshore area of Sumatera in the eastern Indian Ocean. Based on our high-resolution SST using Mg/Ca analyses based on planktonic foraminifera shells of Globigerinoides ruber and alkenone index, U k'37-SST, oxygen isotope stratigraphy, and AMC 14C age-controls, our records show that, during the past 32,000 years, the SSTs were decreased which imply weaker ITF during Marine Isotope Stage (MIS) 2 and 3. The weaker UTF may respond to strengthened northeast monsoon during the boreal winter. During 21 to 15ka, the southeast monsoon had been stronger and the northeast monsoon was relatively weaker. During 15 to 8ka, rapid sea level rising may allow the opening of the gateways in the Makassar Strait and Lombok Strait that may have further strengthened the ITF. During the early Holocene, the northeast and southeast monsoons seem to be both strengthened. We will discuss the implications of the hydrographic variability and their age uncertainties in this paper during the meeting.

Structure and method for controlling the thermal emissivity of a radiating object

DOEpatents

DeSteese, John G.; Antoniak, Zenen I.; White, Michael; Peters, Timothy J.

2004-03-30

A structure and method for changing or controlling the thermal emissivity of the surface of an object in situ, and thus, changing or controlling the radiative heat transfer between the object and its environment in situ, is disclosed. Changing or controlling the degree of blackbody behavior of the object is accomplished by changing or controlling certain physical characteristics of a cavity structure on the surface of the object. The cavity structure, defining a plurality of cavities, may be formed by selectively removing material(s) from the surface, selectively adding a material(s) to the surface, or adding an engineered article(s) to the surface to form a new radiative surface. The physical characteristics of the cavity structure that are changed or controlled include cavity area aspect ratio, cavity longitudinal axis orientation, and combinations thereof. Controlling the cavity area aspect ratio may be by controlling the size of the cavity surface area, the size of the cavity aperture area, or a combination thereof. The cavity structure may contain a gas, liquid, or solid that further enhances radiative heat transfer control and/or improves other properties of the object while in service.

Muslim consumer trust in halal meat status and control in Belgium.

PubMed

Bonne, Karijn; Verbeke, Wim

2008-05-01

This paper focuses on public trust of Belgian Muslims in information sources of halal meat and their confidence in key actors and institutions for monitoring and controlling the halal meat chain. Cross-sectional consumer data were collected through a survey with 367 Muslims during the summer of 2006 in Belgium. Findings reveal that Islamic institutions and especially the Islamic butcher receive in general most confidence for monitoring and controlling the halal status of meat, and for communicating about halal meat. However, based on Muslims' confidence, four distinct market segments were identified: indifferent (29.1%), concerned (9.7%), confident (33.1%) and Islamic idealist (26.7%). These segments differ significantly with respect to trust in information sources and institutions, health and safety perception of halal meat, perceived halal meat consumption barriers, behavioural variables (halal meat consumption frequency and place of purchase), and socio-cultural (acculturation and self-identity) and individual characteristics. Indifferent consumers are rather undecided about who should monitor the halal status of meat, and they are most open to purchasing halal meat in the supermarket. Concerned Muslim consumers display higher confidence in Belgian than in Islamic institutions, which associates with perceiving a lack of information, poor hygiene and safety concern as barriers to purchasing halal meat. Confident consumers display a clear preference for Islamic institutions to monitor and communicate about halal. Islamic idealists, who are typified by younger age, second generation and high Muslim self-identity, differ from the confident consumers through their very low confidence in local Belgian sources and institutions.

Microfinance Institutions' Successful Delivery Of Micronutrient Powders: A Randomized Trial In Rural Haiti.

PubMed

Baum, Aaron; Elize, Wesly; Jean-Louis, Florence

2017-11-01

Globally, two-thirds of child deaths could be prevented by increased provision of health interventions such as vaccines, micronutrient supplements, and water purification tablets. We report the results from a randomized controlled trial in Haiti during 2012 that tested whether microfinance institutions-which reach 200 million households worldwide-can effectively deliver health products. These institutions provide loans to underserved entrepreneurs, primarily poor women in rural areas. In the intervention group, micronutrient powders to improve the nutrition of young children were distributed at regularly occurring microfinance meetings by a trained borrower. In both the control and the intervention groups, nurses led seminars on nutrition and extended breastfeeding during microfinance meetings. At three-month follow-up, the mean difference in hemoglobin concentration between children in the intervention group and those in the control group was 0.28 grams per deciliter (g/dL)-with a subsample of younger children (under two years of age) showing greater relative improvement (0.46 g/dL)-and the odds ratio for children in the intervention group meeting the diagnostic criteria for anemia was 0.64. The results are similar to those of previous studies that evaluated micronutrient powder distribution through dedicated health institutions. Our findings suggest that microfinance institutions are a promising platform for the large-scale delivery of health products in low-income countries.

Key Trends in Institutional Changes Under Sustainable Development

NASA Astrophysics Data System (ADS)

Karpova, Olga; Pevneva, Inna; Dymova, Irina; Kostina, Tatiana; Li, Sergey

2017-11-01

The article is devoted to the consideration of the essential problems of accounting institution formation under the sustainable development of the country and the region. The research is based on the key research the field of the intuition economics and considers the trends of institutional changes including incremental, evolutionary and revolutionary. Approaches to the analysis of institutions are presented as well. The first approach states that economic efficiency is guaranteed by newly emerging institutions. The second approach involves certain internal and external incentives for changing institutions. Whereas the third approach insists on considering institutional changes to be the relation of individual economic entities to institutional innovations in terms of the net benefit from their implementation. The conclusion draws the leading role of the state in the process of the emergence and further development of newly created institutions focusing on the fact that not every change leads to greater efficiency. Thus it is crucial to consider the previous background of institutions development at implementing changes in accounting and control.

Trustees "versus" Directors, Whom Do They Serve? Boards, For-Profits and the Public Good in the United States

ERIC Educational Resources Information Center

Fox Garrity, Bonnie

2015-01-01

Postsecondary education in the United States is provided by public, not-for-profit and for-profit institutions. Public and not-for-profit institutions are expected to serve the public good due to state control or chartering requirements; for-profit institutions are not. Therefore, the decision to serve the public good is vested in the board. The…

Policy-Making Boards and Religious-Affiliated Colleges: The Experiences of Two Baptist Institutions

ERIC Educational Resources Information Center

Jenkins, J. Kevin; Allen, Loyd; Elkins, Penny L.

2008-01-01

Over the last decades of the 20th century, and the first few years of the 21st, the conflict within the life of the Baptist church has often focused on control of Baptist-affiliated institutions of higher education. During this time, two such institutions in Georgia, Mercer University and Shorter College, were engaged in a struggle for power with…

USSR Report, Agriculture.

DTIC Science & Technology

1986-01-10

Scientific- Research and Design - Technological Institute for Animal Husbandry has developed a mixed feed formula for cows producing up to 6,000 kg of milk...under the control of the USSR State Committee on Standards and is closely linked to agricultural scientific research institutions and their...culture’s scientific-technical potential as a whole. Roughly 4,000 workers from 15 institutes of scientific research and bureaus of special design

Profile of Degree/Certificate-Seeking Entering Undergraduate Students, by Control and Level of Institution. Web Tables. NCES 2011-252

ERIC Educational Resources Information Center

Ginder, Scott; Mason, Marcinda

2011-01-01

The Student Right to Know Act requires institutions that participate in any student financial assistance program under Title IV of the Higher Education Act of 1965 (as amended) to disclose graduation rates. To assist institutions in meeting this requirement, the National Center for Education Statistics (NCES) collects these rates as part of the…

[50 years of the Institute for Research in Pharmacy and Biochemistry].

PubMed

Trcka, V

2003-05-01

After the nationalization of pharmaceutical industry and establishment of the United Pharmaceutical Enterprises in 1946, the Research and Control Institute (VKU) was established in Prague in 1947 to support the development of research, manufacture, and control of drugs. After other measures of nationalization and unification of research, in 1951 the research sections of the VKU and the pharmaceutical sections of the Research Institute of CCHZ were fused to form the Research Institute for Pharmacy and Biochemistry (VUFB). The section the VUFB taking care of the quality of production was transformed into the Pharmaceutical Control Institute (KUF). Each of the institutes had its own farm for breeding experimental animals outside Prague. In 1958, KUF was transformed into the Research Institute of Medicinal Plants (VULERO) and later, in 1960, into the Research Institute of Natural Substances (VUPL), which eventually fused with VUFB in 1967. During the years of increasing activities of VUFB, a chemical pilot plant was established in Olomouc, and a department of clinical pharmacology in Plzen. Research activities of VUFB were aimed to search for original drugs and to develop non-proprietary medicines in the field of the central and vegetative nervous systems, blood circulation, inflammatory processes, microbial infections, carcinostatic drugs, etc. In natural substances, the greatest attention was paid to ergot alkaloids, but the extent of research also included the constituents of the poppy, periwinkle, and other plants. An important part of the programme was also the breeding and cultivation of selected medicinal plants. The results of research were continuously published in both inland and foreign scholarly journals and at conferences and congresses. Every year, usually more than 100 papers were published and 40-50 for patents applications were submitted. The activity of the Institute resulted in the production of 30 original substances which were introduced into therapeutic practice. Twenty of them are still commonly prescribed. Some of these original substances got into foreign markets, particularly Prothiaden and Trimepranol represented important exports. In addition, 83 non-proprietary drugs were introduced into the inland market.

Assessing the Biological Safety Profession's Evaluation and Control of Risks Associated with the Field Collection of Potentially Infectious Specimens.

PubMed

Patlovich, Scott J; Emery, Robert J; Whitehead, Lawrence W; Brown, Eric L; Flores, Rene

2015-03-01

Because the origins of the biological safety profession are rooted in the control and prevention of laboratory-associated infections, the vocation focuses primarily on the safe handling of specimens within the laboratory. But in many cases, the specimens and samples handled in the lab are originally collected in the field where a broader set of possible exposure considerations may be present, each with varying degrees of controllability. The failure to adequately control the risks associated with collecting biological specimens in the field may result in illness or injury, and could have a direct impact on laboratory safety, if infectious specimens were packaged or transported inappropriately, for example. This study developed a web-based survey distributed to practicing biological safety professionals to determine the prevalence of and extent to which biological safety programs consider and evaluate field collection activities. In cases where such issues were considered, the data collected characterize the types of controls and methods of oversight at the institutional level that are employed. Sixty-one percent (61%) of the survey respondents indicated that research involving the field collection of biological specimens is conducted at their institutions. A majority (79%) of these field collection activities occur at academic institutions. Twenty-seven percent (27%) of respondents indicated that their safety committees do not consider issues related to biological specimens collected in the field, and only 25% with an oversight committee charged to review field collection protocols have generated a field research-specific risk assessment form to facilitate the assembly of pertinent information for a project risk assessment review. The results also indicated that most biosafety professionals (73% overall; 71% from institutions conducting field collection activities) have not been formally trained on the topic, but many (64% overall; 87% from institutions conducting field collection activities) indicated that training on field research safety issues would be helpful, and even more (71% overall; 93% from institutions conducting field collection activities) would consider participation in such a training course. Results obtained from this study can be used to develop a field research safety toolkit and associated training curricula specifically targeted to biological safety professionals.

Scabies: Prevention and Control

MedlinePlus

... and General Public. Contact Us Parasites Home Prevention & Control Recommend on Facebook Tweet Share Compartir When a ... avoid outbreaks. Institutional outbreaks can be difficult to control and require a rapid, aggressive, and sustained response. ...

[Investigation of non-ionizing radiation hazards from physiotherapy equipment in 16 medical institutions].

PubMed

He, Jia-xi; Zhou, Wei; Qiu, Hai-li; Yang, Guang-tao

2013-12-01

To investigate the non-ionizing radiation hazards from physiotherapy equipment in medical institutions and to explore feasible control measures for occupational diseases. On-site measurement and assessment of ultra-high-frequency radiation, high-frequency electromagnetic field, microwave radiation, and laser radiation were carried out in 16 medical institutions using the methods in the Measurement of Physical Agents in Workplace (GBZ/T189-2007). All the investigated medical institutions failed to take effective protective measures against non-ionizing radiation. Of the 17 ultra-short wave therapy apparatus, 70.6%, 47.1%, and 17.64% had a safe intensity of ultra-high-frequency radiation on the head, chest, and abdomen, respectively. Of the 4 external high-frequency thermotherapy apparatus, 100%, 75%, and 75%had a safe intensity of high-frequency electromagnetic field on the head, chest, and abdomen, respectively. In addition, the intensities of microwave radiation and laser radiation produced by the 18 microwave therapy apparatus and 12 laser therapeutic apparatus met national health standards. There are non-ionizing radiation hazards from physiotherapy equipment in medical institutions, and effective prevention and control measures are necessary.

A cane reduces loss of balance in patients with peripheral neuropathy: results from a challenging unipedal balance test.

PubMed

Ashton-Miller, J A; Yeh, M W; Richardson, J K; Galloway, T

1996-05-01

To test the hypothesis that use of a cane in the nondominant hand during challenging balance tasks would significantly decrease loss of balance in patients with peripheral neuropathy while transferring from bipedal to unipedal stance on an unsteady surface. Nonrandomized control study. Tertiary-care institution. Eight consecutive patients with peripheral neuropathy (PN) and eight age- and gender-matched controls (C) with a mean (SD) age of 65 (8.2) years. Subjects were asked to transfer their weight onto their right foot, despite a rapid +/- 2 degrees or +/- 4 degrees frontal plane tilt of the support surface at 70% of weight transfer, and balance unipedally for at least 3 seconds. The efficacy of their weight transfer was evaluated over 112 consecutive randomized and blocked trials by calculating loss of balance as failure rates (%FR) with and without visual feedback, and with and without use of a cane in the nondominant (left) hand. Results were analyzed using a 2 x 2 x 2 x 2 x 2 repeated-measures analysis of variance (rm-ANOVA) and post hoc t tests. The rm-ANOVA showed that the FR of the PN subjects (47.6% [18.1%]) was significantly higher than C (29.2% [15.2%], p = .036). Removing visual feedback, simulating the dark of night, increased the FR fourfold (p = .000). Use of a cane in the contralateral nondominant hand significantly reduced the FR (p = .000), particularly in the PN group (cane x disease interaction: p = .055). Post hoc t tests showed that with or without visual feedback, the cane reduced the FR of the PN group fourfold and enabled them to perform more reliably than matched controls not using a cane (p = .011). An inversion perturbation resulted in a higher FR than an eversion perturbation (p = .007). The PN group employed larger mean peak cane forces (21.9% BW) than C (13.6% BW) in restoring their balance (p = .000). Use of a cane by PN patients significantly reduced their risk of losing balance on unstable surfaces, especially under low-light conditions.

[Influence of the fluoride releasing dental materials on the bacterial flora of dental plaque].

PubMed

Płuciennik, Małgorzata; Sakowska, Danuta; Krzemiński, Zbigniew; Piatowska, Danuta

2008-01-01

The assessment of influence of silver-free, fluor releasing dental materials on dental plaque bacteria quantity. 17 patients were included into the study. 51 restorations were placed following manufacturers recommendations. Following materials were used: conventional glassionomer Ketac-Molar ESPE, resin modified glassionomer Fuji II LC GC and fluor containing composite Charisma Heraeus Kulzer Class V restorations were placed in following teeth of upper and lower jaw: canines, first bicuspids, second bicuspids. Sound enamel was a control. After 10 weeks the 72 hours old dental plaque was collected from surface of restorations and control using sterile probe. Total amount of 68 dental plaques were investigated. Each plaque was placed on scaled and sterile aluminum foil. The moist weight of dental plaque was scaled. Dental plaque was moved into 7 ml 0.85% NaCl solution reduced by cystein chlorine hydrogen and disintegrated by ultrasounds (power:100 Watt, wave amplitude: 5 micorm). The suspension of dental plaque was serially diluted from 10(-4) to 10(-5) in sterile 0,85% NaCl solution, and seeded with amount of 0.1 ml on appropriate base. In dental plaque trials the amount of cariogenic bacteria was calculated--Streptococcus mutans, Streptococcus, Lactobacillus, Veillonella and Neisseria, and also total amount of aerobic and anaerobic bacteria was measured. Microbiologic studies were performed in Institute of Microbiology, Medical University, Łódź. Statistical analysis of collected data was accomplished. In 72 hours old dental plaques collected from the surfaces of Ketac -Molar, Fuji II LC, Charisma after 10 weeks since being placed into the class V cavity, results show no statistically significant differences in the amount of Streptococcus mutans, Streptococcus spp., Lactobacillus spp., Veillonella spp., Neisseria spp, in total amount of aerobic and anaerobic bacteria and in the quantity proportion of Streptococcus mutans versus Streptococcus spp. in comparison with control trail. Results show no statistically significant differences in the amount of listed above bacteria and in the proportion of Streptococcus mutans versus Streptococcus spp. in 72 hours old dental plaques collected from surfaces of investigated restorative materials.

42 CFR 456.600 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ASSISTANCE PROGRAMS UTILIZATION CONTROL Inspections of Care in Intermediate Care Facilities and Institutions for Mental Diseases § 456.600 Purpose. This subpart prescribes requirements for periodic inspections of care and services intermediate care facilities (ICF's), and institutions for mental diseases (IMD...

77 FR 33751 - Eunice Kennedy Shriver National Institute of Child Health and Human Development; Notice of Closed...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-07

... Institute of Child Health and Human Development Special Emphasis Panel, Asthma Control During Pregnancy: Predictors of Variability in Maternal Impairment Due to Asthma and Associated Maternal and Pregnancy Outcomes...

Controllability of Surface Water Networks

NASA Astrophysics Data System (ADS)

Riasi, M. Sadegh; Yeghiazarian, Lilit

2017-12-01

To sustainably manage water resources, we must understand how to control complex networked systems. In this paper, we study surface water networks from the perspective of structural controllability, a concept that integrates classical control theory with graph-theoretic formalism. We present structural controllability theory and compute four metrics: full and target controllability, control centrality and control profile (FTCP) that collectively determine the structural boundaries of the system's control space. We use these metrics to answer the following questions: How does the structure of a surface water network affect its controllability? How to efficiently control a preselected subset of the network? Which nodes have the highest control power? What types of topological structures dominate controllability? Finally, we demonstrate the structural controllability theory in the analysis of a wide range of surface water networks, such as tributary, deltaic, and braided river systems.

Spatio Temporal Variability of the Global Transmittance During the Arctic POLARSTERN Expedition 106/1 Ice Floe Station

NASA Astrophysics Data System (ADS)

Barrientos Velasco, C.; Macke, A.; Griesche, H.; Engelmann, R.; Deneke, H.; Seifert, P.

2017-12-01

The Arctic is warming at a higher rate than the rest of the planet. This has been leading to a dramatically decrease of snow coverage and sea ice thickness in recent years and several studies have suggested that a similar trend is expected in the upcoming years. Large uncertainties in predicting the Arctic climate arise from our lack of understanding the role clouds play in sea ice / atmosphere interaction. During summer the shortwave radiation dominates and clouds have a net cooling effect at the surface. The strength of this cooling critically depends on cloud phase, composition and height. Clouds interactions with aerosols, and its sensitivity to surface properties further complicates their role in the Arctic system. Scattering between the surface and cloud layers amplifies the cloud shortwave contribution, especially over a highly reflective surface such as snow or ice. Therefore, to comprehend how the Arctic's surface is significantly modulated by solar radiation is necessary to more clearly understand the cloud-induced spatio-temporal variability at process relevant scales. Irradiance variability may also have an effect on the biological productivity of various plankton species below the ice. The present study provides an overview of spatio-temporal variability at spatial scales ranging from several decameters to 1 kilometer of the global transmittance derived from 15 pyranometer stations installed at an ice floe station (June 4-16 2017) during the POLARSTERN expedition PS106/1. Specific irradiance statistics under clear sky, broken clouds and overcast conditions will be described considering the combination of a Cloud Radar Mira 35 and a Polly Raman polarization Lidar. Ultimately, radiative closure studies will be performed to quantify our abilities to reproduce realistic cloud solar radiative forcing under Arctic conditions. Acknowledgements. This research is funded by Deutsche Forschunsgemeinschaft (DFG) and involves the active participation of Leibniz Institut für Troposphärenforschung (TROPOS), Universität Leipzig Institut für Meteorologie (LIM), Universitäat Bremen, Universität zu Köln and Alfred-Wegener-Institut, Helmholtz Zentrum für Polar - und Meeresforschung (AWI).

Beyond Pain Relief: Total Knee Replacement Surgery

MedlinePlus

... long distance runners or high performing athletes,” said orthopedic surgeon Joshua J. Jacobs, M.D. NIH’s National Institute of Arthritis and Musculoskeletal and Skin Diseases (NIAMS) supports Dr. Jacobs’ research. The surgery involves replacing weight-bearing surfaces of ...

Methodology for Outdoor Water Savings Model and Spreadsheet Tool for U.S. and Selected States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Alison A.; Chen, Yuting; Dunham, Camilla

Green lawns and landscaping are archetypical of the populated American landscape, and typically require irrigation, which corresponds to a significant fraction of residential, commercial, and institutional water use. In North American cities, the estimated portion of residential water used for outdoor purposes ranges from 22-38% in cooler climates up to 59-67% in dry and hot environments, while turfgrass coverage within the United States spans 11.1-20.2 million hectares (Milesi et al. 2009). One national estimate uses satellite and aerial photography data to develop a relationship between impervious surface and lawn surface area, yielding a conservative estimate of 16.4 (± 3.6) millionmore » hectares of lawn surface area in the United States—an area three times larger than that devoted to any irrigated crop (Milesi et al. 2005). One approach that holds promise for cutting unnecessary outdoor water use is the increased deployment of “smart” irrigation controllers to increase the water efficiency of irrigation systems. This report describes the methodology and inputs employed in a mathematical model that quantifies the effects of the U.S. Environmental Protection Agency’s WaterSense labeling program for one such type of controller, weather-based irrigation controllers (WBIC). This model builds off that described in “Methodology for National Water Savings Model and Spreadsheet Tool–Outdoor Water Use” and uses a two-tiered approach to quantify outdoor water savings attributable to the WaterSense program for WBIC, as well as net present value (NPV) of that savings. While the first iteration of the model assessed national impacts using averaged national values, this version begins by evaluating impacts in three key large states that make up a sizable portion of the irrigation market: California, Florida, and Texas. These states are considered to be the principal market of “smart” irrigation controllers that may result in the bulk of national savings. Modeled water savings and net present value for these three states should be more accurate and representative than the averaged national values given state-specific inputs such as lot size, water price, and housing stock. To complete the picture of national impacts, the remaining WBIC shipments not assigned to these three states are assessed using the original methodology based on the averaged national values.« less

Targeted Muscle Reinnervation for Real-Time Myoelectric Control of Multifunction Artificial Arms

PubMed Central

Kuiken, Todd A.; Li, Guanglin; Lock, Blair A.; Lipschutz, Robert D.; Miller, Laura A.; Stubblefield, Kathy A.; Englehart, Kevin

2011-01-01

Context Improving the function of prosthetic arms remains a challenge, as access to the neural control information for the arm is lost during amputation. We have developed a surgical technique called targeted muscle reinnervation (TMR) which transfers residual arm nerves to alternative muscle sites. After reinnervation, these target muscles produce an electromyogram (EMG) on the surface of the skin that can be measured and used to control prosthetic arms. Objective Assess the performance of TMR upper-limb amputee patients using a pattern-recognition algorithm to decode EMG signals and control prosthetic arm motions. Design Surface EMG signals were recorded on participants and decoded using a pattern-recognition algorithm. The decoding program controlled the movement of a virtual prosthetic arm. Participants were instructed to perform various arm movements, and their abilities to control the virtual prosthetic arm were measured. In addition, TMR patients used the same control system to operate advanced arm prosthesis prototypes. Setting This study was conducted between January 2007 and January 2008 at the Rehabilitation Institute of Chicago. Participants This study included five patients with shoulder disarticulation or transhumeral amputations who received TMR surgery between February 2002 and October 2006. It also included five non-amputee (control) participants. Main Outcome Measure Performance metrics measured during virtual arm movements included motion-selection time, motion-completion time, and motion-completion (or `success') rate. Three of the TMR patients were also able to test advanced arm prostheses. Results TMR patients were able to repeatedly perform 10 different elbow, wrist and hand motions with the virtual prosthetic arm. For TMR patients, the average (standard deviation (SD)) motion-selection and motion-completion times for elbow and wrist movements were 0.22 s (0.06) and 1.29 s (0.15), respectively. These times were 0.06 s and 0.21 s longer than the average times of control participants. For TMR patients, the average (SD) motion-selection and motion-completion times for hand-grasp patterns were 0.38 s (0.12) and 1.54 s (0.27), respectively. TMR patients successfully completed an average (SD) of 96.3% (3.8) of elbow and wrist movements and 86.9% (13.9) of hand movements within 5 s, compared to 100% (0) and 96.7% (4.7) completed by controls. Three of the patients were able to demonstrate the use of this control system in advanced prostheses including motorized shoulders, elbows, wrists and hands. Conclusion These results suggest that reinnervated muscles can produce sufficient EMG information to control advanced artificial arms. PMID:19211469

Respirable dust measured downwind during rock dust application.

PubMed

Harris, M L; Organiscak, J; Klima, S; Perera, I E

2017-05-01

The Pittsburgh Mining Research Division of the U.S. National Institute for Occupational Safety and Health (NIOSH) conducted underground evaluations in an attempt to quantify respirable rock dust generation when using untreated rock dust and rock dust treated with an anticaking additive. Using personal dust monitors, these evaluations measured respirable rock dust levels arising from a flinger-type application of rock dust on rib and roof surfaces. Rock dust with a majority of the respirable component removed was also applied in NIOSH's Bruceton Experimental Mine using a bantam duster. The respirable dust measurements obtained downwind from both of these tests are presented and discussed. This testing did not measure miners' exposure to respirable coal mine dust under acceptable mining practices, but indicates the need for effective continuous administrative controls to be exercised when rock dusting to minimize the measured amount of rock dust in the sampling device.

[Skin care and prevention of bed sores in bedridden patients].

PubMed

Martínez Cuervo, Fernando; Soldevilla Agreda, J Javier; Verdú Soriano, José; Segovia Gómez, Teresa; García Fernández, Francisco Pedro; Pancorbo Hidalgo, Pedro Luís

2007-12-01

The aging process and environmental aggressions will leave their imprints on the state of a person's skin, possibly compromising some of its functions. Age is a risk factor for the development of bed sores, but not the only factor nor the most important one; therefore, we need to develop prevention programs directed to all patients who spend long periods of time sedentary or bedridden. Prevention programs for bed sores must be based on the best evidence available and include a risk evaluation on these factors: suffering a lesion due to pressure, specific skin treatment, incontinence control, excessive humidity posture changes and the use of special surfaces to manage pressure during an increase in mobility or activity by the patient, local pressure reducing devices as well as paying attention to special situations. All of these care measures have to be developed based on a continuity of treatment among the institutions and caretakers involved with treating each patient.

[Effect of soil microflora on 137Cs transition to plants].

PubMed

Pareniuk, O Yu; Shavanova, K E; Ilienko, V V; Tytova, L V; Levchuk, S E; Gudkov, I N

2015-01-01

The impact of certain types of microorganisms on 137Cs transfer from the substrate into the plant was analyzed in the experiment on artificial mediums. It was found that certain types of microorganisms could either reduce or increase the ratio of 137Cs transfer from the substrate to the plant. It is shown that this property is independent of the localization of the microorganism on the surface of the root, for all the analyzed bacteria belonging to the rhizospheric group. Azotobacter chroococcum UKM B-6003 stimulated the radionuclide transfer to plants up to 1.5 times, while the best bacteria for reducing its accumulation is Burkholderia sp IMER-B1 -53 - 1.3 times in comparison with the control. It was shown that the strain Bacillus megaterium UKM B-5724 from the collection of the Institute of Microbiology and Virology of NASU has a high ability to accumulate radionuclides.

Innate immunity in HIV infection and implications for vaccine design: a summary of the workshop held at the National Institute of Allergy and Infectious Diseases, Bethesda on February 25-26, 2010.

PubMed

Bansal, Geetha P; Leitner, Wolfgang W

2010-12-06

The search for an effective HIV vaccine continues to be a challenge. Several candidates have been tested in preclinical protocols, and a few have been tested in clinical trials without resounding success. It is unclear why vaccine approaches to control HIV infection have been unsuccessful, but opportunities to dissect the causes for the failure have surfaced from recent work on the virology, immunology and pathogenesis of HIV and from analysis of vaccine studies. The significance of the innate immune system in HIV infection may provide new paths to discover effective approaches. This report summarizes a workshop held to discuss the role of selected aspects of innate immunity to viral infections and successful vaccines that may have important implications for designing effective HIV vaccines. Copyright © 2010. Published by Elsevier Ltd.. All rights reserved.

Evaluation of a local exhaust system used in the manufacture of small parts made of reinforced plastic.

PubMed

Lazure, L P

2000-09-01

Fiber-reinforced plastics are used to manufacture a large variety of products, particularly for the transportation sector. Hand lay-up molding and projection molding are the main methods of manufacture. The users of these processes are exposed to appreciable emissions of styrene; in Quebec, more than 3000 workers work in this industry. A statistical analysis of styrene concentrations measured over a five-year period by the Institut de recherche en santé et en sécurité du travail (IRSST, Occupational Health and Safety Research Institute) reveals that for all of the main manufacturing sectors involved, between 40 percent and 78 percent of the results exceed the exposure standard of 50 ppm. This study evaluated the effectiveness of a ventilated table in controlling worker exposure to styrene and acetone in a shop that manufactures fiber-reinforced plastics parts. The evaluated local extraction system consists of a ventilated table with a surface area of 1.2 m x 1.2 m. During molding, the styrene emissions are exhausted through the ventilated table as well as through the slots in a lateral hood. Replacement air, introduced vertically through a supply air shower located above the worker, limits the diffusion of contaminants toward the worker's breathing zone. The reduction in worker exposure to styrene and acetone during hand lay-up molding was measured in the breathing zone for two sizes of molds. The results show that exhaust ventilation reduced the styrene concentrations by 91 percent and that the introduction of replacement air increased the efficiency of the ventilated table to 96 percent. The evaluation performed indicates that the ventilated table adequately controls worker exposure to styrene and acetone during the molding of small components.

Role of the Akt/mTOR signaling pathway in human papillomavirus-associated nasal and sinonasal inverted papilloma.

PubMed

Liu, Yongliang; Duan, Lihua; Tian, Jie; Song, Daoliang; Zhang, Min; Zhao, Shenlin; Yin, Zhaofu; Xiang, Xinxin; Li, Xuezhong

2017-12-01

Nasal and sinonasal inverted papilloma (NSIP) is a benign tumor in which surface epithelial cells grow downward into the underlying supportive tissue with varying degrees of metaplasia. Human papillomavirus (HPV) has been proposed as the causal agent in the pathogenesis of this disease. Many studies have shown that HPV can activate the Akt/mechanistic target of rapamycin (mTOR) signaling pathway, but the role of this pathway in HPV-associated NSIP is largely unknown. In this study, we enrolled 40 control tissue samples and 80 NSIP tissue samples. HPV genotyping showed that 47 of the 80 examined cases of NSIP were HPV-positive (58.8%), and the most common subtype was HPV11 (20/53, 37.7%). The immunohistochemistry showed statistically significant differences in phosphorylated Akt and phosphorylated S6 ribosomal protein staining among control samples, HPV-positive NSIP and HPV-negative NSIP. The HPV11 L1-L2 plasmid increased the proliferation of normal human nasopharyngeal epithelial NP69-SV40T cells and human nasopharyngeal cancer CNE1 cells. Meanwhile, rapamycin, an mTOR inhibitor, reversed the increased cell proliferation induced by the HPV11 L1-L2 plasmid. Western blot analysis showed that Akt/mTOR/S6 were overexpressed in NP69-SV40T cells and CNE1 cells infected with the HPV11 L1-L2 plasmid. These data demonstrate that HPV promotes cell proliferation through the Akt/mTOR signaling pathway in NSIP. © The Author 2017. Published by Oxford University Press on behalf of the Institute of Biochemistry and Cell Biology, Shanghai Institutes for Biological Sciences, Chinese Academy of Sciences. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Sediment and erosion control laboratory facility expansion.

DOT National Transportation Integrated Search

2016-08-01

The Sediment and Erosion Control Laboratory (SEC Lab), formerly the Hydraulics, Sedimentation, and : Erosion Control Laboratory, is operated by the Texas A&M Transportation Institutes Environment and : Planning Program. Performance evaluation prog...

Airport Surface Control Systems Development Analysis Expanded

DOT National Transportation Integrated Search

1990-01-01

A previous MITRE Technical Report, Airport Surface Traffic Control Systems Deployment Analysis, FAA-RD-74-6, presented an analysis of ASTC (Airport Surface Traffic Control) system requirements and developed estimates of the deployment potential of pr...

PREFACE: NC-AFM 2004: Proceedings of the 7th International Conference on Non-contact Atomic Force Microscopy

NASA Astrophysics Data System (ADS)

Schwarz, Udo

2005-03-01

With the ongoing miniaturization of devices and controlled nanostructuring of materials, the importance of atomic-scale information on surfaces and surface properties is growing continuously. The astonishing progress in nanoscience and nanotechnology that took place during the last two decades was in many ways related to recent progress in high-resolution imaging techniques such as scanning tunnelling microscopy and transmission electron microscopy. Since the mid-1990s, non-contact atomic force microscopy (NC-AFM) performed in ultrahigh vacuum has evolved as an alternative technique that achieves atomic resolution, but without the restriction to conducting surfaces of the previously established techniques. Advances of the rapidly developing field of NC-AFM are discussed at annual conferences as part of a series that started in 1998 in Osaka, Japan. This special issue of Nanotechnology is a compilation of original work presented at the 7th International Conference on Non-contact Atomic Force Microscopy that took place in Seattle, USA, 12-15 September 2004. Over the years, the conference grew in size and scope. Atomic resolution imaging of oxides and semiconductors remains an issue. Noticeable new developments have been presented in this regard such as, e.g., the demonstrated ability to manipulate individual atoms. Additionally, the investigation of individual molecules, clusters, and organic materials gains more and more attention. In this context, considerable effort is undertaken to transfer the NC-AFM principle based on frequency modulation to applications in air and liquids with the goal of enabling high-resolution surface studies of biological material in native environments, as well as to reduce the experimental complexity, which so far involves the availability of (costly) vacuum systems. Force spectroscopy methods continue to be improved and are applied to topics such as the imaging of the three-dimensional force field as a function of the distance with atomic resolution, the investigation of near-surface electronic states, the quantification of adhesion forces, and the lateral mapping of surface potentials. The origin of energy dissipation, which is closely related to an in-depth understanding of tip-surface interactions and imaging mechanisms, was the subject of an ongoing discussion and addressed by various theoretical, computational, and experimental contributions. A characteristic of the NC-AFM conference series is the lively and friendly atmosphere, which year after year stimulates scientific discussions between the participants. This time, the programme included 5 invited talks, 84 contributed presentations, and 113 participants; furthermore, three educational lectures were given as part of a pre-conference workshop targeted at NC-AFM newcomers, which was attended by 30 participants. I would like to thank the members of the international steering committee and the programme committee for their continued effort in organizing the meeting. Special thanks go to the chair of the programme and local organizing committees S Fain and the conference manager J Kvamme for making the meeting a success. Financial support is acknowledged from the corporate sponsors MikroMasch USA, Nanonis GmbH, Nanosurf AG, Omicron Nanotechnology, PSIA, Inc., and RHK Technology, as well as from the institutional sponsors National Science Foundation and PNNL/UW Joint Institute for Nanoscience. Finally, I would like to express my gratitude to everyone who participated in assembling this special issue including the authors, the reviewers, and, in particular, the excellent and experienced journal team from the Institute of Physics Publishing headed by Nina Couzin, for devoting their time and efforts so that we could make this issue a useful representation of the progress in NC-AFM while maintaining our tight publication schedule. In conclusion, I would like to mention that the Seattle conference was the first one of the NC-AFM series that took place in the USA. As such, it was part of a series of recent activities within the USA, which will help in establishing a strong domestic NC-AFM community.

Undergraduate research studies program at participating institutions of the HBCU fossil energy consortium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhatia, S.C.; Cardelino, B.H.; Hall, J.H. Jr.

1990-04-30

The objectives of this research program are to expose students in minority institutions to energy and fossil fuels research, to stimulate their interest in the sciences and engineering, and to encourage them to pursue graduate studies, thereby ensuring the necessary supply of manpower for the industrial and energy sectors of the national economy. This report describes a project focused on the surface chemical properties of coal and their influence on the adsorption of aqueous soluble catalyst metals, and research on the characterization of coal liquids. 2 refs., 1 fig.

Analysis of the selected mechanical parameters of coating of filters protecting against hazardous infrared radiation.

PubMed

Gralewicz, Grzegorz; Owczarek, Grzegorz; Kubrak, Janusz

2017-03-01

This article presents a comparison of the test results of selected mechanical parameters (hardness, Young's modulus, critical force for delamination) for protective filters intended for eye protection against harmful infrared radiation. Filters with reflective metallic films were studied, as well as interference filters developed at the Central Institute for Labour Protection - National Research Institute (CIOP-PIB). The test results of the selected mechanical parameters were compared with the test results, conducted in accordance with a standardised method, of simulating filter surface destruction that occurs during use.

[Evaluation of Medical Instruments Cleaning Effect of Fluorescence Detection Technique].

PubMed

Sheng, Nan; Shen, Yue; Li, Zhen; Li, Huijuan; Zhou, Chaoqun

2016-01-01

To compare the cleaning effect of automatic cleaning machine and manual cleaning on coupling type surgical instruments. A total of 32 cleaned medical instruments were randomly sampled from medical institutions in Putuo District medical institutions disinfection supply center. Hygiena System SUREII ATP was used to monitor the ATP value, and the cleaning effect was evaluated. The surface ATP values of the medical instrument of manual cleaning were higher than that of the automatic cleaning machine. Coupling type surgical instruments has better cleaning effect of automatic cleaning machine before disinfection, the application is recommended.

Role of Private Enterprise in Cancer Control in Low to Middle Income Countries

PubMed Central

Mahoney, Martin; Okoye, Ifeoma; Ejiogu, Kenneth; George, Saby; Dy, Grace; Jimoh, Mutiu; Salako, Omolola; Ilegbune, Oge; Chugani, Bindiya; Ezeome, Emmanuel; Popoola, Abiodun O.; Michalek, Arthur M.

2016-01-01

Background. About 65% of cancer deaths globally occur in low to middle income countries (LMICs) where prioritization and allocation of resources to cancer care are often quite poor. In the absence of governmental focus on this problem, public-private partnerships may be an avenue to provide effective cancer control. Methods. This manuscript highlights the establishment of a nongovernmental organization (NGO) to stimulate the development of partnerships between oncology professionals, private enterprise, and academic institutions, both locally and internationally. Examples of capacity building, grant support, establishment of collaborative networks, and the development of a facility to provide clinical care are highlighted. Results. Collaborations were established between oncology professionals at academic institutions in the US and Nigeria. Cancer control workshops were conducted in Nigeria with grant support from the Union for International Cancer Control (UICC). A monthly tumor board conference was established at LASUTH in Lagos, and further capacity building is underway with grant support from the United States NCI. An outpatient, privately funded oncology clinic in Lagos has been launched. Conclusion. In LMICs, effective partnership between public and private institutions can lead to tangible strides in cancer control. The use of creative healthcare financing models can also support positive change. PMID:28070189

42 CFR 480.116 - Notice to individuals and institutions under review.

Code of Federal Regulations, 2011 CFR

2011-10-01

... AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION REVIEW INFORMATION Utilization and Quality Control Quality... institutions under review with the following information— (a) The title and address of the person responsible...

42 CFR 480.116 - Notice to individuals and institutions under review.

Code of Federal Regulations, 2013 CFR

2013-10-01

... AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION INFORMATION Utilization and Quality Control Quality... institutions under review with the following information— (a) The title and address of the person responsible...

42 CFR 480.116 - Notice to individuals and institutions under review.

Code of Federal Regulations, 2012 CFR

2012-10-01

... AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION INFORMATION Utilization and Quality Control Quality... institutions under review with the following information— (a) The title and address of the person responsible...

42 CFR 480.116 - Notice to individuals and institutions under review.

Code of Federal Regulations, 2014 CFR

2014-10-01

... AND HUMAN SERVICES (CONTINUED) QUALITY IMPROVEMENT ORGANIZATIONS ACQUISITION, PROTECTION, AND DISCLOSURE OF QUALITY IMPROVEMENT ORGANIZATION INFORMATION Utilization and Quality Control Quality... institutions under review with the following information— (a) The title and address of the person responsible...

Institutional Controls and Educational Research.

ERIC Educational Resources Information Center

Homan, Roger

1990-01-01

Recognizing tendencies toward contract research and possible consequences, advocates creating a conduct code to regulate educational research and protect its integrity. Reports survey responses from 48 British institutions, showing no systematic code. States confidence in supervisory discretion currently guides research. Proposes a specific code…

Science | Argonne National Laboratory

Science.gov Websites

Publications Researchers Postdocs Exascale Computing Institute for Molecular Engineering at Argonne Work with Scientific Publications Researchers Postdocs Exascale Computing Institute for Molecular Engineering at understand, predict, and ultimately control matter and energy at the electronic, atomic, and molecular levels

Management Information in Tertiary Institutions.

ERIC Educational Resources Information Center

Findlay, A. W.

1981-01-01

A college or university's management information system corresponds roughly to the institution's structure, with these elements in descending order in the hierarchy: policy and planning, a planning system, control and coordination, and typical operating systems (payroll, exams, scheduling, library, facilities assignments, and accounting…

Enterobiasis (Pinworm Infection): Prevention and Control

MedlinePlus

... and General Public. Contact Us Parasites Home Prevention & Control Recommend on Facebook Tweet Share Compartir Washing your ... there. In institutions, day care centers, and schools, control of pinworm can be difficult, but mass drug ...

Defence Transformation with Frictions - The Case of Sweden

DTIC Science & Technology

2010-04-01

RTO-MP-SAS-081 4 - 3 Sweden had during the Cold War competence to develop and produce systems as e.g.: • AA artillery and missiles • Anti- armour ...systems • Howitzers • Armoured vehicles • Surface vessels • Submarines • Minesweepers • Mines • Costal artillery • Aircraft • Air-to-surface...with anti- armour e.g.) and an institute for electronics (radar mainly). A department for studies and planning was decided in 1958. In 2001 the National

On the Existence of the Logarithmic Surface Layer in the Inner Core of Hurricanes

DTIC Science & Technology

2012-01-01

characteristics of eyewall boundary layer of Hurricane Hugo (1989). Mon. Wea. Rev., 139, 1447-1462. Zhang, JA, Montgomery MT. 2012 Observational...the inner core of hurricanes Roger K. Smitha ∗and Michael T. Montgomeryb a Meteorological Institute, University of Munich, Munich, Germany b Dept. of...logarithmic surface layer”, or log layer, in the boundary layer of the rapidly-rotating core of a hurricane . One such study argues that boundary-layer

Thermal Characterization of the Air Force Institute of Technology Solar Simulation Thermal Vacuum Chamber

DTIC Science & Technology

2014-03-27

mass and surface area, Equation 12 demonstrates an energy balance for the material, assuming the rest of the surfaces of the material are isothermal...radiation in order to dissipate heat from 18 the spacecraft [8]. As discussed in the system thermal energy balance defined previously, emission of IR... energy balance calculations will be utilized. The Monte Carlo/Ray Trace Radiation Method The Monte Carlo/Ray Trace method is utilized in order to

Basic Research in Electronics (JSEP).

DTIC Science & Technology

1981-09-30

These antennas can have a low profile or be flush-mounted, are inherently rugged, are simple to fabricate , and can be made conformal to the surface...made in. the " light flash" radiated by the plasma in front of the metal surface. D. High-Power Microwave-Atmosphere Interactions The original model...Scintillation," Ph.D. Thesis , Poly- technic Institute of New York (August 1980); also POLY-MRI Report No. 80-1410. 7. S.R. Barone, "Angular Momentum of Particles

Microwave ice accretion meter

NASA Technical Reports Server (NTRS)

Magenheim, Bertram (Inventor); Rocks, James K. (Inventor)

1984-01-01

A system for indicating ice thickness and rate of ice thickness growth on surfaces is disclosed. The region to be monitored for ice accretion is provided with a resonant surface waveguide which is mounted flush, below the surface being monitored. A controlled oscillator provides microwave energy via a feed point at a controllable frequency. A detector is coupled to the surface waveguide and is responsive to electrical energy. A measuring device indicates the frequency deviation of the controlled oscillator from a quiescent frequency. A control means is provided to control the frequency of oscillation of the controlled oscillator. In a first, open-loop embodiment, the control means is a shaft operated by an operator. In a second, closed-loop embodiment, the control means is a processor which effects automatic control.

Interdisciplinary Development of an Improved Emergency Department Procedural Work Surface Through Iterative Design and Use Testing in Simulated and Clinical Environments.

PubMed

Zhang, Xiao C; Bermudez, Ana M; Reddy, Pranav M; Sarpatwari, Ravi R; Chheng, Darin B; Mezoian, Taylor J; Schwartz, Victoria R; Simmons, Quinneil J; Jay, Gregory D; Kobayashi, Leo

2017-03-01

A stable and readily accessible work surface for bedside medical procedures represents a valuable tool for acute care providers. In emergency department (ED) settings, the design and implementation of traditional Mayo stands and related surface devices often limit their availability, portability, and usability, which can lead to suboptimal clinical practice conditions that may affect the safe and effective performance of medical procedures and delivery of patient care. We designed and built a novel, open-source, portable, bedside procedural surface through an iterative development process with use testing in simulated and live clinical environments. The procedural surface development project was conducted between October 2014 and June 2016 at an academic referral hospital and its affiliated simulation facility. An interdisciplinary team of emergency physicians, mechanical engineers, medical students, and design students sought to construct a prototype bedside procedural surface out of off-the-shelf hardware during a collaborative university course on health care design. After determination of end-user needs and core design requirements, multiple prototypes were fabricated and iteratively modified, with early variants featuring undermattress stabilizing supports or ratcheting clamp mechanisms. Versions 1 through 4 underwent 2 hands-on usability-testing simulation sessions; version 5 was presented at a design critique held jointly by a panel of clinical and industrial design faculty for expert feedback. Responding to select feedback elements over several surface versions, investigators arrived at a near-final prototype design for fabrication and use testing in a live clinical setting. This experimental procedural surface (version 8) was constructed and then deployed for controlled usability testing against the standard Mayo stands in use at the study site ED. Clinical providers working in the ED who opted to participate in the study were provided with the prototype surface and just-in-time training on its use when performing bedside procedures. Subjects completed the validated 10-point System Usability Scale postshift for the surface that they had used. The study protocol was approved by the institutional review board. Multiple prototypes and recursive design revisions resulted in a fully functional, portable, and durable bedside procedural surface that featured a stainless steel tray and intuitive hook-and-lock mechanisms for attachment to ED stretcher bed rails. Forty-two control and 40 experimental group subjects participated and completed questionnaires. The median System Usability Scale score (out of 100; higher scores associated with better usability) was 72.5 (interquartile range [IQR] 51.3 to 86.3) for the Mayo stand; the experimental surface was scored at 93.8 (IQR 84.4 to 97.5 for a difference in medians of 17.5 (95% confidence interval 10 to 27.5). Subjects reported several usability challenges with the Mayo stand; the experimental surface was reviewed as easy to use, simple, and functional. In accordance with experimental live environment deployment, questionnaire responses, and end-user suggestions, the project team finalized the design specification for the experimental procedural surface for open dissemination. An iterative, interdisciplinary approach was used to generate, evaluate, revise, and finalize the design specification for a new procedural surface that met all core end-user requirements. The final surface design was evaluated favorably on a validated usability tool against Mayo stands when use tested in simulated and live clinical settings. Copyright © 2016 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

High precision high flow range control valve

DOEpatents

McCray, J.A.

1999-07-13

A fluid control valve is described having a valve housing having first and second valve housing openings for the ingress and egress of fluid through the control valve. Disposed within a void formed by the control valve is a sleeve having at least one sleeve opening to permit the flow of fluid therethrough. A flow restricter travels within the sleeve to progressively block off the sleeve opening and thereby control flow. A fluid passageway is formed between the first valve housing opening and the outer surface of the sleeve. A second fluid passageway is formed between the inside of the sleeve and the second valve housing opening. Neither fluid passageway contains more than one 90 [degree] turn. In the preferred embodiment only one of the two fluid passageways contains a 90[degree] turn. In another embodiment, the control valve housing is bifurcated by a control surface having control surface opening disposed therethrough. A flow restricter is in slidable contact with the control surface to restrict flow of fluid through the control surface openings. 12 figs.

High precision high flow range control valve

DOEpatents

McCray, John A.

1999-01-01

A fluid control valve is described having a valve housing having first and second valve housing openings for the ingress and egress of fluid through the control valve. Disposed within a void formed by the control valve is a sleeve having at least one sleeve opening to permit the flow of fluid therethrough. A flow restricter travels within the sleeve to progressively block off the sleeve opening and thereby control flow. A fluid passageway is formed between the first valve housing opening and the outer surface of the sleeve. A second fluid passageway is formed between the inside of the sleeve and the second valve housing opening. Neither fluid passageway contains more than one 90.degree. turn. In the preferred embodiment only one of the two fluid passageways contains a 90.degree. turn. In another embodiment, the control valve housing is bifurcated by a control surface having control surface opening disposed therethrough. A flow restricter is in slidable contact with the control surface to restrict flow of fluid through the control surface openings.

Malaria eradication: the economic, financial and institutional challenge.

PubMed

Mills, Anne; Lubell, Yoel; Hanson, Kara

2008-12-11

Malaria eradication raises many economic, financial and institutional challenges. This paper reviews these challenges, drawing on evidence from previous efforts to eradicate malaria, with a special focus on resource-poor settings; summarizes more recent evidence on the challenges, drawing on the literature on the difficulties of scaling-up malaria control and strengthening health systems more broadly; and explores the implications of these bodies of evidence for the current call for elimination and intensified control. Economic analyses dating from the eradication era, and more recent analyses, suggest that, in general, the benefits of malaria control outweigh the costs, though few studies have looked at the relative returns to eradication versus long-term control. Estimates of financial costs are scanty and difficult to compare. In the 1960s, the consolidation phase appeared to cost less than $1 per capita and, in 1988, was estimated to be $2.31 per capita (both in 2006 prices). More recent estimates for high coverage of control measures suggest a per capita cost of several dollars. Institutional challenges faced by malaria eradication included limits to the rule of law (a major problem where malaria was concentrated in border areas with movement of people associated with illegal activities), the existence and performance of local implementing structures, and political sustainability at national and global levels. Recent analyses of the constraints to scaling-up malaria control, together with the historical evidence, are used to discuss the economic, financial and institutional challenges that face the renewed call for eradication and intensified control. The paper concludes by identifying a research agenda covering: issues of the allocative efficiency of malaria eradication, especially using macro-economic modelling to estimate the benefits and costs of malaria eradication and intensified control, and studies of the links between malaria control and economic development, the costs and consequences of the various tools and mixes of tools employed in control and eradication, issues concerning the extension of coverage of interventions and service delivery approaches, especially those that can reach the poorest, research on the processes of formulating and implementing malaria control and eradication policies, at both international and national levels, research on financing issues, at global and national levels.

Malaria eradication: the economic, financial and institutional challenge

PubMed Central

Mills, Anne; Lubell, Yoel; Hanson, Kara

2008-01-01

Malaria eradication raises many economic, financial and institutional challenges. This paper reviews these challenges, drawing on evidence from previous efforts to eradicate malaria, with a special focus on resource-poor settings; summarizes more recent evidence on the challenges, drawing on the literature on the difficulties of scaling-up malaria control and strengthening health systems more broadly; and explores the implications of these bodies of evidence for the current call for elimination and intensified control. Economic analyses dating from the eradication era, and more recent analyses, suggest that, in general, the benefits of malaria control outweigh the costs, though few studies have looked at the relative returns to eradication versus long-term control. Estimates of financial costs are scanty and difficult to compare. In the 1960s, the consolidation phase appeared to cost less than $1 per capita and, in 1988, was estimated to be $2.31 per capita (both in 2006 prices). More recent estimates for high coverage of control measures suggest a per capita cost of several dollars. Institutional challenges faced by malaria eradication included limits to the rule of law (a major problem where malaria was concentrated in border areas with movement of people associated with illegal activities), the existence and performance of local implementing structures, and political sustainability at national and global levels. Recent analyses of the constraints to scaling-up malaria control, together with the historical evidence, are used to discuss the economic, financial and institutional challenges that face the renewed call for eradication and intensified control. The paper concludes by identifying a research agenda covering: ∘ issues of the allocative efficiency of malaria eradication, especially using macro-economic modelling to estimate the benefits and costs of malaria eradication and intensified control, and studies of the links between malaria control and economic development ∘ the costs and consequences of the various tools and mixes of tools employed in control and eradication ∘ issues concerning the extension of coverage of interventions and service delivery approaches, especially those that can reach the poorest ∘ research on the processes of formulating and implementing malaria control and eradication policies, at both international and national levels ∘ research on financing issues, at global and national levels. PMID:19091035

Surface Characterization of an Organized Titanium Dioxide Layer

NASA Astrophysics Data System (ADS)

Curtis, Travis

Soft lithographic printing techniques can be used to control the surface morphology of titanium dioxide layers on length scales of several hundred nanometers. Controlling surface morphology and volumetric organization of titanium dioxide electrodes can potentially be used in dye-sensitized solar cell devices. This thesis explores how layer-by-layer replication can lead to well defined, dimensionally controlled volumes and details how these control mechanisms influence surface characteristics of the semiconducting oxide.

Effective use of surface-water management to control saltwater intrusion

NASA Astrophysics Data System (ADS)

Hughes, J. D.; White, J.

2012-12-01

The Biscayne aquifer in southeast Florida is susceptible to saltwater intrusion and inundation from rising sea-level as a result of high groundwater withdrawal rates and low topographic relief. Groundwater levels in the Biscayne aquifer are managed by an extensive canal system that is designed to control flooding, supply recharge to municipal well fields, and control saltwater intrusion. We present results from an integrated surface-water/groundwater model of a portion of the Biscayne aquifer to evaluate the ability of the existing managed surface-water control network to control saltwater intrusion. Surface-water stage and flow are simulated using a hydrodynamic model that solves the diffusive-wave approximation of the depth-integrated shallow surface-water equations. Variable-density groundwater flow and fluid density are solved using the Oberbeck--Boussinesq approximation of the three-dimensional variable-density groundwater flow equation and a sharp interface approximation, respectively. The surface-water and variable-density groundwater domains are implicitly coupled during each Picard iteration. The Biscayne aquifer is discretized into a multi-layer model having a 500-m square horizontal grid spacing. All primary and secondary surface-water features in the active model domain are discretized into segments using the 500-m square horizontal grid. A 15-year period of time is simulated and the model includes 66 operable surface-water control structures, 127 municipal production wells, and spatially-distributed daily internal and external hydrologic stresses. Numerical results indicate that the existing surface-water system can be effectively used in many locations to control saltwater intrusion in the Biscayne aquifer resulting from increases in groundwater withdrawals or sea-level rise expected to occur over the next 25 years. In other locations, numerical results indicate surface-water control structures and/or operations may need to be modified to control saltwater intrusion.

Surface Mediated Self-Assembly of Amyloid Peptides

NASA Astrophysics Data System (ADS)

Fakhraai, Zahra

2015-03-01

Amyloid fibrils have been considered as causative agents in many neurodegenerative diseases, including Alzheimer's disease, Parkinson's disease, type II diabetes and amyloidosis. Amyloid fibrils form when proteins or peptides misfold into one dimensional crystals of stacked beta-sheets. In solution, amyloid fibrils form through a nucleation and growth mechanism. The rate limiting nucleation step requires a critical concentration much larger than those measured in physiological conditions. As such the exact origins of the seeds or oligomers that result in the formation of fully mature fibrils in the body remain topic intense studies. It has been suggested that surfaces and interfaces can enhance the fibrillization rate. However, studies of the mechanism and kinetics of the surface-mediated fibrillization are technologically challenging due to the small size of the oligomer and protofibril species. Using smart sample preparation technique to dry the samples after various incubation times we are able to study the kinetics of fibril formation both in solution and in the vicinity of various surfaces using high-resolution atomic force microscopy. These studies elucidate the role of surfaces in catalyzing amyloid peptide formation through a nucleation-free process. The nucleation free self-assembly is rapid and requires much smaller concentrations of peptides or proteins. We show that this process resembles diffusion limited aggregation and is governed by the peptide adhesion rate, two -dimensional diffusion of the peptides on the surface, and preferential interactions between the peptides. These studies suggest an alternative pathway for amyloid formation may exist, which could lead to new criteria for disease prevention and alternative therapies. Research was partially supported by a seed grant from the National Institute of Aging of the National Institutes of Health (NIH) under Award Number P30AG010124 (PI: John Trojanowski) and the University of Pennsylvania.

Rapid control of mold temperature during injection molding process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liparoti, Sara; Titomanlio, Giuseppe; Hunag, Tsang Min

2015-05-22

The control of mold surface temperature is an important factor that determines surface morphology and its dimension in thickness direction. It can also affect the frozen molecular orientation and the mold surface replicability in injection molded products. In this work, thin thermally active films were used to quickly control the mold surface temperature. In particular, an active high electrical conductivity carbon black loaded polyimide composites sandwiched between two insulating thin polymeric layers was used to condition the mold surface. By controlling the heating time, it was possible to control precisely the temporal variation of the mold temperature surface during themore » entire cycle. The surface heating rate was about 40°C/s and upon contact with the polymer the surface temperature decreased back to 40°C within about 5 s; the overall cycle time increased only slightly. The effect on cross section sample morphology of samples of iPP were analyzed and discussed on the basis of the recorded temperature evolution.« less

Transnational organizing: Issue professionals in environmental sustainability networks.

PubMed

Henriksen, Lasse Folke; Seabrooke, Leonard

2016-09-01

An ongoing question for institutional theory is how organizing occurs transnationally, where institution building occurs in a highly ambiguous environment. This article suggests that at the core of transnational organizing is competition and coordination within professional and organizational networks over who controls issues. Transnational issues are commonly organized through professional battles over how issues are treated and what tasks are involved. These professional struggles are often more important than what organization has a formal mandate over an issue. We highlight how 'issue professionals' operate in two-level professional and organizational networks to control issues. This two-level network provides the context for action in which professionals do their institutional work. The two-level network carries information about professional incentives and also norms about how issues should be treated and governed by organizations. Using network and career sequences methods, we provide a case of transnational organizing through professionals who attempt issue control and network management on transnational environmental sustainability certification. The article questions how transnational organizing happens, and how we can best identify attempts at issue control.

Transnational organizing: Issue professionals in environmental sustainability networks

PubMed Central

Henriksen, Lasse Folke; Seabrooke, Leonard

2015-01-01

An ongoing question for institutional theory is how organizing occurs transnationally, where institution building occurs in a highly ambiguous environment. This article suggests that at the core of transnational organizing is competition and coordination within professional and organizational networks over who controls issues. Transnational issues are commonly organized through professional battles over how issues are treated and what tasks are involved. These professional struggles are often more important than what organization has a formal mandate over an issue. We highlight how ‘issue professionals’ operate in two-level professional and organizational networks to control issues. This two-level network provides the context for action in which professionals do their institutional work. The two-level network carries information about professional incentives and also norms about how issues should be treated and governed by organizations. Using network and career sequences methods, we provide a case of transnational organizing through professionals who attempt issue control and network management on transnational environmental sustainability certification. The article questions how transnational organizing happens, and how we can best identify attempts at issue control. PMID:28490973

Simulating the Reiner Gamma Lunar Swirl: Solar Wind Standoff Works!

NASA Astrophysics Data System (ADS)

Deca, Jan; Divin, Andrey; Lue, Charles; Ahmadi, Tara; Horányi, Mihály

2017-04-01

Discovered by early astronomers during the Renaissance, the Reiner Gamma formation is a prominent lunar surface feature. Observations have shown that the tadpole-shaped albedo marking, or swirl, is co-located with one of the strongest crustal magnetic anomalies on the Moon. The region therefore presents an ideal test case to constrain the kinetic solar wind interaction with lunar magnetic anomalies and its possible consequences for lunar swirl formation. All known swirls have been associated with magnetic anomalies, but the opposite does not hold. The evolutionary scenario of the lunar albedo markings has been under debate since the Apollo era. By coupling fully kinetic simulations with a surface vector mapping model based on Kaguya and Lunar Prospector magnetic field measurements, we show that solar wind standoff is the dominant process to have formed the lunar swirls. It is an ion-electron kinetic interaction mechanism that locally prevents weathering by solar wind ions and the subsequent formation of nanophase iron. The correlation between the surface weathering process and the surface reflectance is optimal when evaluating the proton energy flux, rather than the proton density or number flux. This is an important result to characterise the primary process for surface darkening. In addition, the simulated proton reflection rate is for the first time directly compared with in-orbit flux measurements from the SARA:SWIM ion sensor onboard the Chandrayaan-1 spacecraft. The agreement is found excellent. Understanding the relation between the lunar surface albedo features and the co-located magnetic anomaly is essential for our interpretation of the Moon's geological history, space weathering, and to evaluate future lunar exploration opportunities. This work was supported in part by NASA's Solar System Exploration Research Virtual Institute (SSERVI): Institute for Modeling Plasmas, Atmosphere, and Cosmic Dust (IMPACT). The work by C.L. was supported by NASA grant NNX15AP89G. Resources were provided by the NASA High-End Computing (HEC) Program through the NASA Advanced Supercomputing (NAS) Division at Ames Research Center. Part of this work was inspired by discussions within International Team 336: "Plasma Surface Interactions with Airless Bodies in Space and the Laboratory" at the International Space Science Institute, Bern, Switzerland. The LRO-WAC data are publicly available from the NASA PDS Imaging Node. The Wind/MFI and Wind/SWE data used in this study are available via the NASA National Space Science Data Center, Space Physics Data Facility, and the MIT Space Plasma Group. The Chandrayaan-1/SARA data are available via the Indian Space Science Data Center.

34 CFR 600.31 - Change in ownership resulting in a change in control for private nonprofit, private for-profit...

Code of Federal Regulations, 2012 CFR

2012-07-01

... regularly and publicly traded; (ii) A U.S. institutional investor, as defined in 17 CFR 240.15a-6(b)(7... ownership is held as a U.S. institutional investor, as defined in 17 CFR 240.15a-6(b)(7), held in mutual..., DEPARTMENT OF EDUCATION INSTITUTIONAL ELIGIBILITY UNDER THE HIGHER EDUCATION ACT OF 1965, AS AMENDED...

34 CFR 600.31 - Change in ownership resulting in a change in control for private nonprofit, private for-profit...

Code of Federal Regulations, 2013 CFR

2013-07-01

... regularly and publicly traded; (ii) A U.S. institutional investor, as defined in 17 CFR 240.15a-6(b)(7... ownership is held as a U.S. institutional investor, as defined in 17 CFR 240.15a-6(b)(7), held in mutual..., DEPARTMENT OF EDUCATION INSTITUTIONAL ELIGIBILITY UNDER THE HIGHER EDUCATION ACT OF 1965, AS AMENDED...

34 CFR 600.31 - Change in ownership resulting in a change in control for private nonprofit, private for-profit...

Code of Federal Regulations, 2014 CFR

2014-07-01

... regularly and publicly traded; (ii) A U.S. institutional investor, as defined in 17 CFR 240.15a-6(b)(7... ownership is held as a U.S. institutional investor, as defined in 17 CFR 240.15a-6(b)(7), held in mutual..., DEPARTMENT OF EDUCATION INSTITUTIONAL ELIGIBILITY UNDER THE HIGHER EDUCATION ACT OF 1965, AS AMENDED...

Modeling Interpersonal Trust in Distributed Command and Control Teams

DTIC Science & Technology

2010-06-01

Journal of Applied Psychology, 92(4), 909-927. Dirks, K. T. & Ferrin, D. L. (2001). The role of trust in organizational settings. Organization Science ...Command Performance Research, Inc.), Arwen E. Hunter (U. S. Army Research Institute for the Behavioral and Social Sciences ) & Linda G. Pierce (U. S...Army Research Institute for the Behavioral and Social Sciences ) Command Performance Research, Inc. U. S. Army Research Institute 206 N

[Medical technologist as a member of infection control team].

PubMed

Okuzumi, Katsuko; Ieiri, Tamio

2005-11-01

For the prevention of infection at institutions, an Anti-nosocomial Infection Committee or an Infection Control Team (ICT) is organized at each institution according to its scale. We report the present status of the ICT managed mainly by medical technologists engaged in microbiological examination (certified medical microbiological technologists) at Dokkyo University School of Medicine. Since this hospital is an educational hospital, the department of clinical laboratory medicine cooperates with the microbiological laboratory of the clinical laboratory in infection control education of medical workers (such as medical students, nursing students, physicians and nurses) in infection diagnosis, infection control/infection management. Since infection control is achieved by improvement in hygiene knowledge and its practice in all citizens, we also attached importance to publicity activities associated with microbiology for patients, their families, and all medical workers.

Real-Time Flight Envelope Monitoring System

NASA Technical Reports Server (NTRS)

Kerho, Michael; Bragg, Michael B.; Ansell, Phillip J.

2012-01-01

The objective of this effort was to show that real-time aircraft control-surface hinge-moment information could be used to provide a robust and reliable prediction of vehicle performance and control authority degradation. For a given airfoil section with a control surface -- be it a wing with an aileron, rudder, or elevator -- the control-surface hinge moment is sensitive to the aerodynamic characteristics of the section. As a result, changes in the aerodynamics of the section due to angle-of-attack or environmental effects such as icing, heavy rain, surface contaminants, bird strikes, or battle damage will affect the control surface hinge moment. These changes include both the magnitude of the hinge moment and its sign in a time-averaged sense, and the variation of the hinge moment with time. The current program attempts to take the real-time hinge moment information from the aircraft control surfaces and develop a system to predict aircraft envelope boundaries across a range of conditions, alerting the flight crew to reductions in aircraft controllability and flight boundaries.

Elliptic surface grid generation in three-dimensional space

NASA Technical Reports Server (NTRS)

Kania, Lee

1992-01-01

A methodology for surface grid generation in three dimensional space is described. The method solves a Poisson equation for each coordinate on arbitrary surfaces using successive line over-relaxation. The complete surface curvature terms were discretized and retained within the nonhomogeneous term in order to preserve surface definition; there is no need for conventional surface splines. Control functions were formulated to permit control of grid orthogonality and spacing. A method for interpolation of control functions into the domain was devised which permits their specification not only at the surface boundaries but within the interior as well. An interactive surface generation code which makes use of this methodology is currently under development.

The institutional context of tobacco production in Zambia.

PubMed

Labonté, Ronald; Lencucha, Raphael; Drope, Jeffrey; Packer, Corinne; Goma, Fastone M; Zulu, Richard

2018-01-16

Tobacco production is said to be an important contributor to Zambia's economy in terms of labour and revenue generation. In light of Zambia's obligations under the WHO Framework Convention of Tobacco Control (FCTC) we examined the institutional actors in Zambia's tobacco sector to better understand their roles and determine the institutional context that supports tobacco production in Zambia. Findings from 26 qualitative, semi-structured individual or small-group interviews with key informants from governmental, intergovernmental and non-governmental organisations were analysed, along with data and information from published literature. Although Zambia is obligated under the FCTC to take steps to reduce tobacco production, the country's weak economy and strong tobacco interests make it difficult to achieve this goal. Respondents uniformly acknowledged that growing the country's economy and ensuring employment for its citizens are the government's top priorities. Lacklustre coordination and collaboration between the institutional actors, both within and outside government, contributes to an environment that helps sustain tobacco production in the country. A Tobacco Products Control Bill has been under review for a number of years, but with no supply measures included, and with no indication of when or whether it will be passed. As with other low-income countries involved in tobacco production, there is inconsistency between Zambia's economic policy to strengthen the country's economy and its FCTC commitment to regulate and control tobacco production. The absence of a whole-of-government approach towards tobacco control has created an institutional context of duelling objectives, with some government ministries working at cross-purposes and tobacco interests left unchecked. With no ultimate coordinating authority, this industry risks being run according to the desire and demands of multinational tobacco companies, with few, if any, checks against them.

Cleaning and disinfecting environmental surfaces in health care: Toward an integrated framework for infection and occupational illness prevention.

PubMed

Quinn, Margaret M; Henneberger, Paul K; Braun, Barbara; Delclos, George L; Fagan, Kathleen; Huang, Vanthida; Knaack, Jennifer L S; Kusek, Linda; Lee, Soo-Jeong; Le Moual, Nicole; Maher, Kathryn A E; McCrone, Susan H; Mitchell, Amber Hogan; Pechter, Elise; Rosenman, Kenneth; Sehulster, Lynne; Stephens, Alicia C; Wilburn, Susan; Zock, Jan-Paul

2015-05-01

The Cleaning and Disinfecting in Healthcare Working Group of the National Institute for Occupational Safety and Health, National Occupational Research Agenda, is a collaboration of infection prevention and occupational health researchers and practitioners with the objective of providing a more integrated approach to effective environmental surface cleaning and disinfection (C&D) while protecting the respiratory health of health care personnel. The Working Group, comprised of >40 members from 4 countries, reviewed current knowledge and identified knowledge gaps and future needs for research and practice. An integrated framework was developed to guide more comprehensive efforts to minimize harmful C&D exposures without reducing the effectiveness of infection prevention. Gaps in basic knowledge and practice that are barriers to an integrated approach were grouped in 2 broad areas related to the need for improved understanding of the (1) effectiveness of environmental surface C&D to reduce the incidence of infectious diseases and colonization in health care workers and patients and (2) adverse health impacts of C&D on health care workers and patients. Specific needs identified within each area relate to basic knowledge, improved selection and use of products and practices, effective hazard communication and training, and safer alternatives. A more integrated approach can support multidisciplinary teams with the capacity to maximize effective and safe C&D in health care. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

MSATT: Mars Surface and Atmosphere Through Time. Volume 100

NASA Technical Reports Server (NTRS)

1995-01-01

The papers published here are based on a workshop entitled "Mars: Past, Present, and Future: Results from the MSATT Program." MSATT (Mars Surface and Atmosphere Through Time) was the last of the Mars data analysis programs and functioned mainly through a series of focused workshops, the final one being held at the Lunar and Planetary Institute in Houston, Texas on November 15-17, 1993. The program began and ended with workshops that brought the entire MSATT community together. Here you will find papers that address the geology, mineralogy, and meteorology of Mars in an effort to assess how the surface and atmosphere of this fascinating planet have evolved over time. Could early Mars have been warmed by a brighter young sun instead of a massive greenhouse effect? Were glaciers and hydrological cycles part of Mars' relatively recent past, or was aeolian activity responsible for the putative glacial features? Do the SNCs come from a single source region, or is more than one site involved? And what really are the properties of Martian soils and what do they tell us about the weathering environment? Clearly, these are difficult questions, but progress toward answers can be found in this issue. Also contained in this issue are a mix of theoretical and observational papers that deal with the general circulation of the current atmosphere, the factors that drive it (dust properties), and the role it plays in controlling the current climate system.

Design and performance evaluation of a 1000-year evapotranspiration-capillary surface barrier

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Zhuanfang Fred; Strickland, Christopher E.; Link, Steven O.

Surface barrier technology is used to isolate radioactive waste and to reduce or eliminate recharge water to the waste zone for 1000 years or longer. However, the design and evaluation of such a barrier is challenging because of the extremely long design life. The Prototype Hanford Barrier (PHB) was designed as a 1000-year barrier with pre-determined design and performance objectives and demonstrated in field from 1994 to present. The barrier was tested to evaluate surface-barrier design and performance at the field scale under conditions of enhanced and natural precipitation and of no vegetation. The monitoring data demonstrate that the barriermore » satisfied nearly all key objectives. The PHB far exceeded the Resource Conservation and Recovery Act criteria, functioned in Hanford’s semiarid climate, limited drainage to well below the 0.5 mm yr-1 performance criterion, limited runoff, and minimized erosion. Given the two-decade record of successful performance and consideration of all the processes and mechanisms that could degrade the stability and hydrology in the future, the results suggest the PHB is very likely to perform for its 1000-year design life. This conclusion is based on two assumptions: (1) the exposed subgrade receives protection against erosion and (2) institutional controls prevent inadvertent human activity at the barrier. The PHB design can serve as the base for site-specific barriers over waste sites containing underground nuclear waste, uranium mine tailings, and hazardous mine waste.« less

Development of a complex groundwater model to assess the relation among groundwater resource exploitation, seawater intrusion and land subsidence

NASA Astrophysics Data System (ADS)

Hsi Ting, Fang; Yih Chi, Tan; Chen, Jhong Bing

2016-04-01

The land subsidence, which is usually irreversible, in Taiwan Pintung Plain occurred due to groundwater overexploitation. Many of the land subsidence areas in Taiwan are located in coastal area. It could not only result in homeland loss, but also vulnerability to flooding because the function of drainage system and sea wall are weakened for the lowered ground surface. Groundwater salinization and seawater intrusion could happen more easily as well. This research focuses on grasping the trend of environmental change due to the damage and impact from inappropriate development of aquaculture in the last decades. The main task is developing the artificial neural networks (ANNs) and complex numerical model for conjunctive use of surface and groundwater which is composed of a few modules such as land use, land subsidence, contamination transportation and etc. An approach based on self-organizing map (SOM) is proposed to delineate groundwater recharge zones. Several topics will be studied such as coupling of surface water and groundwater modeling, assessing the benefit of improving groundwater resources by recharge, identifying the improper usage of groundwater resources, and investigating the effect of over-pumping on land subsidence in different depth. In addition, a complete plan for managing both the flooding and water resources will be instituted by scheming non-engineering adaptation strategies for homeland planning, ex. controlling pumping behavior in area vulnerable to land subsidence and increasing groundwater recharge.

Analysis of Policy Issues Relating to Public Investment in Private Freight Infrastructure

DOT National Transportation Integrated Search

1999-12-01

The Norman Y. Mineta International Institute for Surface Transportation Policy Studies (IISTPS) at San Josi State University conducted this study to review the issues and implications involved in the investment of public funds in private freight infr...

Some data on the static longitudinal stability and control of airplanes : design of control surfaces

NASA Technical Reports Server (NTRS)

Martinov, A; Kolosov, E

1940-01-01

In the solution of a number of problems on the stability and controllability of airplanes, there arises the necessity for knowing the characteristics of the tail surfaces of the types in common use today. Of those characteristics, the most important are the effectiveness and hinge moments of the tail surfaces. As has been shown in the present paper, there exists the possibility of determining these characteristics by the formulas obtained with a degree of accuracy sufficient for the purposes of preliminary computation. These formulas take into account a number of fundamental tail characteristics such as tail cut-outs on the control surface and the form of the control surface leading edge.

Ullmann-like reactions for the synthesis of complex two-dimensional materials

NASA Astrophysics Data System (ADS)

Quardokus, Rebecca C.; Tewary, V. K.; DelRio, Frank W.

2016-11-01

Engineering two-dimensional materials through surface-confined synthetic techniques is a promising avenue for designing new materials with tailored properties. Developing and understanding reaction mechanisms for surface-confined synthesis of two-dimensional materials requires atomic-level characterization and chemical analysis. Beggan et al (2015 Nanotechnology 26 365602) used scanning tunneling microscopy and x-ray photoelectron spectroscopy to elucidate the formation mechanism of surface-confined Ullmann-like coupling of thiophene substituted porphyrins on Ag(111). Upon surface deposition, bromine is dissociated and the porphyrins couple with surface adatoms to create linear strands and hexagonally packed molecules. Annealing the sample results in covalently-bonded networks of thienylporphyrin derivatives. A deeper understanding of surface-confined Ullmann-like coupling has the potential to lead to precision-engineered nano-structures through synthetic techniques. Contribution of the National Institute of Standards and Technology, not subject to copyright in the United States of America.

34 CFR 675.26 - FWS Federal share limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the student employee. (c) If an institution receives more money under an employment agreement from an...) The Strengthening Institutions Program, American Indian Tribally Controlled Colleges and Universities... Strengthening Historically Black Colleges and Universities Program (34 CFR part 608); or (4) The Strengthening...

34 CFR 675.26 - FWS Federal share limitations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the student employee. (c) If an institution receives more money under an employment agreement from an...) The Strengthening Institutions Program, American Indian Tribally Controlled Colleges and Universities... Strengthening Historically Black Colleges and Universities Program (34 CFR part 608); or (4) The Strengthening...

34 CFR 675.26 - FWS Federal share limitations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the student employee. (c) If an institution receives more money under an employment agreement from an...) The Strengthening Institutions Program, American Indian Tribally Controlled Colleges and Universities... Strengthening Historically Black Colleges and Universities Program (34 CFR part 608); or (4) The Strengthening...

34 CFR 675.26 - FWS Federal share limitations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the student employee. (c) If an institution receives more money under an employment agreement from an...) The Strengthening Institutions Program, American Indian Tribally Controlled Colleges and Universities... Strengthening Historically Black Colleges and Universities Program (34 CFR part 608); or (4) The Strengthening...

34 CFR 675.26 - FWS Federal share limitations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the student employee. (c) If an institution receives more money under an employment agreement from an...) The Strengthening Institutions Program, American Indian Tribally Controlled Colleges and Universities... Strengthening Historically Black Colleges and Universities Program (34 CFR part 608); or (4) The Strengthening...

38 CFR 21.4152 - Control by agencies of the United States.

Code of Federal Regulations, 2011 CFR

2011-07-01

... VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION Administration of Educational... of educational institutions and State agencies generally prohibited. No department, agency, or... State educational agency, or any educational institution. (Authority: 38 U.S.C. 3682; Pub. L. 100-323...

38 CFR 21.4152 - Control by agencies of the United States.

Code of Federal Regulations, 2010 CFR

2010-07-01

... VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION Administration of Educational... of educational institutions and State agencies generally prohibited. No department, agency, or... State educational agency, or any educational institution. (Authority: 38 U.S.C. 3682; Pub. L. 100-323...

Evolutionary grinding model for nanometric control of surface roughness for aspheric optical surfaces.

PubMed

Han, Jeong-Yeol; Kim, Sug-Whan; Han, Inwoo; Kim, Geon-Hee

2008-03-17

A new evolutionary grinding process model has been developed for nanometric control of material removal from an aspheric surface of Zerodur substrate. The model incorporates novel control features such as i) a growing database; ii) an evolving, multi-variable regression equation; and iii) an adaptive correction factor for target surface roughness (Ra) for the next machine run. This process model demonstrated a unique evolutionary controllability of machining performance resulting in the final grinding accuracy (i.e. averaged difference between target and measured surface roughness) of -0.2+/-2.3(sigma) nm Ra over seven trial machine runs for the target surface roughness ranging from 115 nm to 64 nm Ra.

Stability Characteristics of a Combat Aircraft with Control Surface Failure

DTIC Science & Technology

1989-11-01

I TI l ’ ’- ELECT 71 JAN 0 219903 ~OF S STABILITY CHARACTERISTICS OF A COMBAT AIRCRAFT WITH CONTROL SURFACE FAILURE Thesis Captain Stephen M. Zaiser...CONTROL SURFACE FAILURE Thesis Captain Stephen M. Zaiser AFIT/GAEIENY/89D-42 Approved for Public Release; Distribution unlimited DTIC ELECTE JAN0 2 19901...m m mm m m mm immmmm m D - STABILITY CHARACTERISTICS OF A COMBAT AIRCRAFT WITH CONTROL SURFACE FAILURE Thesis Presented to the

Alternative control techniques document: NOx emissions from industrial/commercial/institutional (ICI) boilers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-03-01

Industrial, commercial, and institutional (ICI) boilers have been identified as a category that emits more than 25 tons of oxides of nitrogen (NOx) per year. This alternative control techniques (ACT) document provides technical information for use by State and local agencies to develop and implement regulatory programs to control NOx emissions from ICI boilers. Additional ACT documents are being developed for other stationary source categories. Chapter 2 summarizes the findings of this study. Chapter 3 presents information on the ICI boiler types, fuels, operation, and industry applications. Chapter 4 discusses NOx formation and uncontrolled NOx emission factors. Chapter 5 coversmore » alternative control techniques and achievable controlled emission levels. Chapter 6 presents the cost and cost effectiveness of each control technique. Chapter 7 describes environmental and energy impacts associated with implementing the NOx control techniques. Finally, Appendices A through G provide the detailed data used in this study to evaluate uncontrolled and controlled emissions and the costs of controls for several retrofit scenarios.« less