School to Work: Making the Transition.

ERIC Educational Resources Information Center

Academy for Educational Development, Washington, DC. National Inst. for Work and Learning.

This publication describes the Academy for Educational Development's (AED's) vision and work in school-to-work transition and related areas. School-to-work transition is defined, and components of a successful school-to-work transition system are listed. The National Institute for Work and Learning (NIWL) is currently conducting an extensive study…

Example of a Human Factors Engineering approach to a medication administration work system: potential impact on patient safety.

PubMed

Beuscart-Zéphir, Marie-Catherine; Pelayo, Sylvia; Bernonville, Stéphanie

2010-04-01

The objectives of this paper are: In this approach, the implementation of such a complex IT solution is considered a major redesign of the work system. The paper describes the Human Factor (HF) tasks embedded in the project lifecycle: (1) analysis and modelling of the current work system and usability assessment of the medication CPOE solution; (2) HF recommendations for work re-design and usability recommendations for IT system re-engineering both aiming at a safer and more efficient work situation. Standard ethnographic methods were used to support the analysis of the current work system and work situations, coupled with cognitive task analysis methods and documents review. Usability inspection (heuristic evaluation) and both in-lab (simulated tasks) and on-site (real tasks) usability tests were performed for the evaluation of the CPOE candidate. Adapted software engineering models were used in combination with usual textual descriptions, tasks models and mock-ups to support the recommendations for work and product re-design. The analysis of the work situations identified different work organisations and procedures across the hospital's departments. The most important differences concerned the doctor-nurse communications and cooperation modes and the procedures for preparing and administering the medications. The assessment of the medication CPOE functions uncovered a number of usability problems including severe ones leading to impossible to detect or to catch errors. Models of the actual and possible distribution of tasks and roles were used to support decision making in the work design process. The results of the usability assessment were translated into requirements to support the necessary re-engineering of the IT application. The HFE approach to medication CPOE efficiently identifies and distinguishes currently unsafe or uncomfortable work situations that could obviously benefit from an IT solution from other work situations incorporating efficient work procedures that might be impaired by the implementation of the CPOE. In this context, a careful redesign of the work situation and of the entire work system is necessary to actually benefit from the installation of the product in terms of patient safety and human performances. In parallel, a usability assessment of the product to be implemented is mandatory to identify potentially dangerous usability flaws and to fix them before the installation. (c) 2009 Elsevier Ireland Ltd. All rights reserved.

The Effects of Concurrent Verbal and Visual Tasks on Category Learning

ERIC Educational Resources Information Center

Miles, Sarah J.; Minda, John Paul

2011-01-01

Current theories of category learning posit separate verbal and nonverbal learning systems. Past research suggests that the verbal system relies on verbal working memory and executive functioning and learns rule-defined categories; the nonverbal system does not rely on verbal working memory and learns non-rule-defined categories (E. M. Waldron…

Optimal management of non-Markovian biological populations

USGS Publications Warehouse

Williams, B.K.

2007-01-01

Wildlife populations typically are described by Markovian models, with population dynamics influenced at each point in time by current but not previous population levels. Considerable work has been done on identifying optimal management strategies under the Markovian assumption. In this paper we generalize this work to non-Markovian systems, for which population responses to management are influenced by lagged as well as current status and/or controls. We use the maximum principle of optimal control theory to derive conditions for the optimal management such a system, and illustrate the effects of lags on the structure of optimal habitat strategies for a predator-prey system.

Advanced Fiber Optic-Based Sensing Technology for Unmanned Aircraft Systems

NASA Technical Reports Server (NTRS)

Richards, Lance; Parker, Allen R.; Piazza, Anthony; Ko, William L.; Chan, Patrick; Bakalyar, John

2011-01-01

This presentation provides an overview of fiber optic sensing technology development activities performed at NASA Dryden in support of Unmanned Aircraft Systems. Examples of current and previous work are presented in the following categories: algorithm development, system development, instrumentation installation, ground R&D, and flight testing. Examples of current research and development activities are provided.

Lightning protection of distribution systems

NASA Astrophysics Data System (ADS)

Darveniza, M.; Uman, M. A.

1982-09-01

Research work on the lightning protection of distribution systems is described. The rationale behind the planning of the first major phase of the work - the field experiments conducted in the Tampa Bay area during August 1978 and July to September 1979 is explained. The aims of the field work were to characterize lightning in the Tampa Bay area, and to identify the lightning parameters associated with the occurrence of line outages and equipment damage on the distribution systems of the participating utilities. The equipment developed for these studies is fully described. The field work provided: general data on lightning - e.g., electric and magnetic fields of cloud and ground flashes; data from automated monitoring of lightning activity; stroke current waveshapes and peak currents measured at distribution arresters; and line outage and equipment damage on 13 kV networks in the Tampa Bay area. Computer aided analyses were required to collate and to process the accumulated data. The computer programs developed for this work are described.

The Management of New Ideas: An Entrepreneur’s Perspective

DTIC Science & Technology

2017-06-01

MARCIMS Marine Civil Information Management System MARCORSYSCOM Marine Corps Systems Command MARFORPAC Marine Forces Pacific Command MCCDC Marine Corp...any personally identifying information . While this work aims to generate theory related to the management of new ideas and their meanings during the...currently deployed civil information management system as the current system in use was antiquated and frustrating to use. While we were enthusiastic

Stability Analysis of Distributed Engine Control Systems Under Communication Packet Drop (Postprint)

DTIC Science & Technology

2008-07-01

use, modify, reproduce, release, perform, display, or disclose the work. 14. ABSTRACT Currently, Full Authority Digital Engine Control ( FADEC ...based on a centralized architecture framework is being widely used for gas turbine engine control. However, current FADEC is not able to meet the...system (DEC). FADEC based on Distributed Control Systems (DCS) offers modularity, improved control systems prognostics and fault tolerance along with

Gaussian white noise as a resource for work extraction.

PubMed

Dechant, Andreas; Baule, Adrian; Sasa, Shin-Ichi

2017-03-01

We show that uncorrelated Gaussian noise can drive a system out of equilibrium and can serve as a resource from which work can be extracted. We consider an overdamped particle in a periodic potential with an internal degree of freedom and a state-dependent friction, coupled to an equilibrium bath. Applying additional Gaussian white noise drives the system into a nonequilibrium steady state and causes a finite current if the potential is spatially asymmetric. The model thus operates as a Brownian ratchet, whose current we calculate explicitly in three complementary limits. Since the particle current is driven solely by additive Gaussian white noise, this shows that the latter can potentially perform work against an external load. By comparing the extracted power to the energy injection due to the noise, we discuss the efficiency of such a ratchet.

Automated eddy current analysis of materials

NASA Technical Reports Server (NTRS)

Workman, Gary L.

1991-01-01

The use of eddy current techniques for characterizing flaws in graphite-based filament-wound cylindrical structures is described. A major emphasis was also placed upon incorporating artificial intelligence techniques into the signal analysis portion of the inspection process. Developing an eddy current scanning system using a commercial robot for inspecting graphite structures (and others) was a goal in the overall concept and is essential for the final implementation for the expert systems interpretation. Manual scans, as performed in the preliminary work here, do not provide sufficiently reproducible eddy current signatures to be easily built into a real time expert system. The expert systems approach to eddy current signal analysis requires that a suitable knowledge base exist in which correct decisions as to the nature of a flaw can be performed. A robotic workcell using eddy current transducers for the inspection of carbon filament materials with improved sensitivity was developed. Improved coupling efficiencies achieved with the E-probes and horseshoe probes are exceptional for graphite fibers. The eddy current supervisory system and expert system was partially developed on a MacIvory system. Continued utilization of finite element models for predetermining eddy current signals was shown to be useful in this work, both for understanding how electromagnetic fields interact with graphite fibers, and also for use in determining how to develop the knowledge base. Sufficient data was taken to indicate that the E-probe and the horseshoe probe can be useful eddy current transducers for inspecting graphite fiber components. The lacking component at this time is a large enough probe to have sensitivity in both the far and near field of a thick graphite epoxy component.

Why Our Educational System Is Not Working.

ERIC Educational Resources Information Center

Sikula, John

2003-01-01

Analyzes the current system of U.S. public education and why it is not working, focusing on the lack of financial support (federal, state, and local) needed to run a first-rate educational system and lack of societal priority by suggesting that the average American spends dollars on items considered luxuries in other countries (e.g., cars, sports,…

a Study on Satellite Diagnostic Expert Systems Using Case-Based Approach

NASA Astrophysics Data System (ADS)

Park, Young-Tack; Kim, Jae-Hoon; Park, Hyun-Soo

1997-06-01

Many research works are on going to monitor and diagnose diverse malfunctions of satellite systems as the complexity and number of satellites increase. Currently, many works on monitoring and diagnosis are carried out by human experts but there are needs to automate much of the routine works of them. Hence, it is necessary to study on using expert systems which can assist human experts routine work by doing automatically, thereby allow human experts devote their expertise more critical and important areas of monitoring and diagnosis. In this paper, we are employing artificial intelligence techniques to model human experts' knowledge and inference the constructed knowledge. Especially, case-based approaches are used to construct a knowledge base to model human expert capabilities which use previous typical exemplars. We have designed and implemented a prototype case-based system for diagnosing satellite malfunctions using cases. Our system remembers typical failure cases and diagnoses a current malfunction by indexing the case base. Diverse methods are used to build a more user friendly interface which allows human experts can build a knowledge base in as easy way.

Model Scaling of Hydrokinetic Ocean Renewable Energy Systems

NASA Astrophysics Data System (ADS)

von Ellenrieder, Karl; Valentine, William

2013-11-01

Numerical simulations are performed to validate a non-dimensional dynamic scaling procedure that can be applied to subsurface and deeply moored systems, such as hydrokinetic ocean renewable energy devices. The prototype systems are moored in water 400 m deep and include: subsurface spherical buoys moored in a shear current and excited by waves; an ocean current turbine excited by waves; and a deeply submerged spherical buoy in a shear current excited by strong current fluctuations. The corresponding model systems, which are scaled based on relative water depths of 10 m and 40 m, are also studied. For each case examined, the response of the model system closely matches the scaled response of the corresponding full-sized prototype system. The results suggest that laboratory-scale testing of complete ocean current renewable energy systems moored in a current is possible. This work was supported by the U.S. Southeast National Marine Renewable Energy Center (SNMREC).

Systems Science

ERIC Educational Resources Information Center

Christakis, Alexander; Hammond, Debora; Jackson, Michael; Laszlo, Alexander; Mitroff, Ian; Snowden, Dave; Troncale, Len; Carr-Chellman, Alison; Spector, J. Michael; Wilson, Brent

2013-01-01

Scholars representing the field of systems science were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might change our understanding. The scholars included Alexander Christakis, Debora Hammond, Michael Jackson, Alexander Laszlo, Ian Mitroff, Dave…

Establishment of a VISAR Measurement System for Material Model Validation in DSTO

DTIC Science & Technology

2013-02-01

advancements published in the works by L.M. Baker, E.R. Hollenbach and W.F. Hemsing [1-3] and results in the user-friendly interface and configuration of the...VISAR system [4] used in the current work . VISAR tests are among the mandatory instrumentation techniques when validating material models and...The present work reports on preliminary tests using the recently commissioned DSTO VISAR system, providing an assessment of the experimental set-up

UTILIZATION OF ACUTE CARE NURSE PRACTITIONERS TO COMBAT PHYSICIAN SHORTAGES IN THE MILITARY TRAUMA SYSTEM: WORKING TOWARDS IMPROVED OUTCOMES

DTIC Science & Technology

2016-10-01

MILITARY TRAUMA SYSTEM: WORKING TOWARDS IMPROVED OUTCOMES by April J. Dunlevy, Maj, USAF, NC A Research Report Submitted to the Faculty In...developed to aid in efforts to provide safe , effective and efficient care. One barrier to this goal is the current national shortage of physician...healthcare system. 5 Preface I have been working in healthcare for 24 years, practicing in both civilian and military facilities

New Phone System Coming to NCI Campus at Frederick | Poster

Cancer.gov

By Travis Fouche and Trent McKee, Guest Writers Beginning in September, phones at the NCI Campus at Frederick will begin to be replaced, as the project to upgrade the current phone system ramps up. Over the next 16 months, the Information Systems Program (ISP) will be working with Facilities Maintenance and Engineering and Computer & Statistical Services to replace the current

International society of blood transfusion working party on red cell immunogenetics and terminology: report of the Seoul and London meetings.

PubMed

Storry, J R; Castilho, L; Chen, Q; Daniels, G; Denomme, G; Flegel, W A; Gassner, C; de Haas, M; Hyland, C; Keller, M; Lomas-Francis, C; Moulds, J M; Nogues, N; Olsson, M L; Peyrard, T; van der Schoot, C E; Tani, Y; Thornton, N; Wagner, F; Wendel, S; Westhoff, C; Yahalom, V

2016-08-01

The Working Party has met twice since the last report: in Seoul, South Korea 2014, and in London, UK 2015, both in association with the International Society of Blood Transfusion (ISBT) Congress. As in previous meetings, matters pertaining to blood group antigen nomenclature were discussed. Eleven new blood group antigens were added to seven blood group systems. This brings the current total of blood group antigens recognized by the ISBT to 346, of which 308 are clustered within 36 blood groups systems. The remaining 38 antigens are currently unassigned to a known blood group system.

Intelligent Work Process Engineering System

NASA Technical Reports Server (NTRS)

Williams, Kent E.

2003-01-01

Optimizing performance on work activities and processes requires metrics of performance for management to monitor and analyze in order to support further improvements in efficiency, effectiveness, safety, reliability and cost. Information systems are therefore required to assist management in making timely, informed decisions regarding these work processes and activities. Currently information systems regarding Space Shuttle maintenance and servicing do not exist to make such timely decisions. The work to be presented details a system which incorporates various automated and intelligent processes and analysis tools to capture organize and analyze work process related data, to make the necessary decisions to meet KSC organizational goals. The advantages and disadvantages of design alternatives to the development of such a system will be discussed including technologies, which would need to bedesigned, prototyped and evaluated.

The Multispectral Imaging Science Working Group. Volume 2: Working group reports

NASA Technical Reports Server (NTRS)

Cox, S. C. (Editor)

1982-01-01

Summaries of the various multispectral imaging science working groups are presented. Current knowledge of the spectral and spatial characteristics of the Earth's surface is outlined and the present and future capabilities of multispectral imaging systems are discussed.

Distributed, cooperating knowledge-based systems

NASA Technical Reports Server (NTRS)

Truszkowski, Walt

1991-01-01

Some current research in the development and application of distributed, cooperating knowledge-based systems technology is addressed. The focus of the current research is the spacecraft ground operations environment. The underlying hypothesis is that, because of the increasing size, complexity, and cost of planned systems, conventional procedural approaches to the architecture of automated systems will give way to a more comprehensive knowledge-based approach. A hallmark of these future systems will be the integration of multiple knowledge-based agents which understand the operational goals of the system and cooperate with each other and the humans in the loop to attain the goals. The current work includes the development of a reference model for knowledge-base management, the development of a formal model of cooperating knowledge-based agents, the use of testbed for prototyping and evaluating various knowledge-based concepts, and beginning work on the establishment of an object-oriented model of an intelligent end-to-end (spacecraft to user) system. An introductory discussion of these activities is presented, the major concepts and principles being investigated are highlighted, and their potential use in other application domains is indicated.

Verbal Working Memory in Children with Mild Intellectual Disabilities

ERIC Educational Resources Information Center

Van der Molen, M. J.; Van Luit, J. E. H.; Jongmans, M. J.; Van der Molen, M. W.

2007-01-01

Background: Previous research into working memory of individuals with intellectual disabilities (ID) has established clear deficits. The current study examined working memory in children with mild ID (IQ 55-85) within the framework of the Baddeley model, fractionating working memory into a central executive and two slave systems, the phonological…

Aircraft Capability Management

NASA Technical Reports Server (NTRS)

Mumaw, Randy; Feary, Mike

2018-01-01

This presentation presents an overview of work performed at NASA Ames Research Center in 2017. The work concerns the analysis of current aircraft system management displays, and the initial development of an interface for providing information about aircraft system status. The new interface proposes a shift away from current aircraft system alerting interfaces that report the status of physical components, and towards displaying the implications of degradations on mission capability. The proposed interface describes these component failures in terms of operational consequences of aircraft system degradations. The research activity was an effort to examine the utility of different representations of complex systems and operating environments to support real-time decision making of off-nominal situations. A specific focus was to develop representations that provide better integrated information to allow pilots to more easily reason about the operational consequences of the off-nominal situations. The work is also seen as a pathway to autonomy, as information is integrated and understood in a form that automated responses could be developed for the off-nominal situations in the future.

Views of Teachers Working in South-East Anatolia Region Regarding Current Problems in Education

ERIC Educational Resources Information Center

Bagceci, Birsen

2017-01-01

The purpose of this study is to identify the current problems of the teachers working in the provinces of Southeastern Anatolia in Turkey and to list these problems according to their importance. Screening model is used in the study. One open-ended question was asked (identify seven problems related to the education system and order them according…

Current Research Activities in Drive System Technology in Support of the NASA Rotorcraft Program

NASA Technical Reports Server (NTRS)

Handschuh, Robert F.; Zakrajsek, James J.

2006-01-01

Drive system technology is a key area for improving rotorcraft performance, noise/vibration reduction, and reducing operational and manufacturing costs. An overview of current research areas that support the NASA Rotorcraft Program will be provided. Work in drive system technology is mainly focused within three research areas: advanced components, thermal behavior/emergency lubrication system operation, and diagnostics/prognostics (also known as Health and Usage Monitoring Systems (HUMS)). Current research activities in each of these activities will be presented. Also, an overview of the conceptual drive system requirements and possible arrangements for the Heavy Lift Rotorcraft program will be reviewed.

A Framework of Working Across Disciplines in Early Design and R&D of Large Complex Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas; Papalambros, Panos Y.; Baker, Wayne E.

2015-01-01

This paper examines four primary methods of working across disciplines during R&D and early design of large-scale complex engineered systems such as aerospace systems. A conceptualized framework, called the Combining System Elements framework, is presented to delineate several aspects of cross-discipline and system integration practice. The framework is derived from a theoretical and empirical analysis of current work practices in actual operational settings and is informed by theories from organization science and engineering. The explanatory framework may be used by teams to clarify assumptions and associated work practices, which may reduce ambiguity in understanding diverse approaches to early systems research, development and design. The framework also highlights that very different engineering results may be obtained depending on work practices, even when the goals for the engineered system are the same.

Foundations for Protecting Renewable-Rich Distribution Systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ellis, Abraham; Brahma, Sukumar; Ranade, Satish

High proliferation of Inverter Interfaced Distributed Energy Resources (IIDERs) into the electric distribution grid introduces new challenges to protection of such systems. This is because the existing protection systems are designed with two assumptions: 1) system is single-sourced, resulting in unidirectional fault current, and (2) fault currents are easily detectable due to much higher magnitudes compared to load currents. Due to the fact that most renewables interface with the grid though inverters, and inverters restrict their current output to levels close to the full load currents, both these assumptions are no longer valid - the system becomes multi-sourced, and overcurrent-basedmore » protection does not work. The primary scope of this study is to analyze the response of a grid-tied inverter to different faults in the grid, leading to new guidelines on protecting renewable-rich distribution systems.« less

New Phone System Coming to NCI Campus at Frederick | Poster

Cancer.gov

By Travis Fouche and Trent McKee, Guest Writers Beginning in September, phones at the NCI Campus at Frederick will begin to be replaced, as the project to upgrade the current phone system ramps up. Over the next 16 months, the Information Systems Program (ISP) will be working with Facilities Maintenance and Engineering and Computer & Statistical Services to replace the current Avaya phone system with a Cisco Unified Communications phone system. The Cisco system is already in use at the Advanced Technology Research Facility (ATRF).

Alternative Delivery Systems: A Potential Partnership for Education and Public Broadcasting.

ERIC Educational Resources Information Center

Baltzer, Jan A.

If educators and public broadcasters are to realize their potential for providing high quality educational and cultural material to the public, they must be aware of current and upcoming technologies and work in concert to achieve their goals. Several alternative delivery systems are currently available to help educators and broadcasters expand…

Automatic system for ionization chamber current measurements.

PubMed

Brancaccio, Franco; Dias, Mauro S; Koskinas, Marina F

2004-12-01

The present work describes an automatic system developed for current integration measurements at the Laboratório de Metrologia Nuclear of Instituto de Pesquisas Energéticas e Nucleares. This system includes software (graphic user interface and control) and a module connected to a microcomputer, by means of a commercial data acquisition card. Measurements were performed in order to check the performance and for validating the proposed design.

Methods for Estimating Environmental Effects and Constraints on NexGen: High Density Case Study

NASA Technical Reports Server (NTRS)

Augustine, S.; Ermatinger, C.; Graham, M.; Thompson, T.

2010-01-01

This document provides a summary of the current methods developed by Metron Aviation for the estimate of environmental effects and constraints on the Next Generation Air Transportation System (NextGen). This body of work incorporates many of the key elements necessary to achieve such an estimate. Each section contains the background and motivation for the technical elements of the work, a description of the methods used, and possible next steps. The current methods described in this document were selected in an attempt to provide a good balance between accuracy and fairly rapid turn around times to best advance Joint Planning and Development Office (JPDO) System Modeling and Analysis Division (SMAD) objectives while also supporting the needs of the JPDO Environmental Working Group (EWG). In particular this document describes methods applied to support the High Density (HD) Case Study performed during the spring of 2008. A reference day (in 2006) is modeled to describe current system capabilities while the future demand is applied to multiple alternatives to analyze system performance. The major variables in the alternatives are operational/procedural capabilities for airport, terminal, and en route airspace along with projected improvements to airframe, engine and navigational equipment.

Energized Oxygen : Speiser Current Sheet Bifurcation

NASA Astrophysics Data System (ADS)

George, D. E.; Jahn, J. M.

2017-12-01

A single population of energized Oxygen (O+) is shown to produce a cross-tail bifurcated current sheet in 2.5D PIC simulations of the magnetotail without the influence of magnetic reconnection. Treatment of oxygen in simulations of space plasmas, specifically a magnetotail current sheet, has been limited to thermal energies despite observations of and mechanisms which explain energized ions. We performed simulations of a homogeneous oxygen background, that has been energized in a physically appropriate manner, to study the behavior of current sheets and magnetic reconnection, specifically their bifurcation. This work uses a 2.5D explicit Particle-In-a-Cell (PIC) code to investigate the dynamics of energized heavy ions as they stream Dawn-to-Dusk in the magnetotail current sheet. We present a simulation study dealing with the response of a current sheet system to energized oxygen ions. We establish a, well known and studied, 2-species GEM Challenge Harris current sheet as a starting point. This system is known to eventually evolve and produce magnetic reconnection upon thinning of the current sheet. We added a uniform distribution of thermal O+ to the background. This 3-species system is also known to eventually evolve and produce magnetic reconnection. We add one additional variable to the system by providing an initial duskward velocity to energize the O+. We also traced individual particle motion within the PIC simulation. Three main results are shown. First, energized dawn- dusk streaming ions are clearly seen to exhibit sustained Speiser motion. Second, a single population of heavy ions clearly produces a stable bifurcated current sheet. Third, magnetic reconnection is not required to produce the bifurcated current sheet. Finally a bifurcated current sheet is compatible with the Harris current sheet model. This work is the first step in a series of investigations aimed at studying the effects of energized heavy ions on magnetic reconnection. This work differs significantly from previous investigations involving heavy ions in that they are energized as opposed to being simply thermal. This is a variation based firmly on published in-situ measurements. It also differs in that a complete population is used as opposed to simply test particles in a magnetic field model.

Development of a Work Control System for Propulsion Testing at Stennis Space Center (SSC)

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2004-01-01

In 1996, Stennis Space Center was given management authority for all Propulsion Testing for NASA. Over the next few years several research and development (R&D) test facilities were completed and brought up to full operation in what is known as the E-Complex Test Facility at Stennis Space Center. This paper will explain the requirements and steps taken to develop the current Test Operations' electronic work control system. The Work Control System developed includes work authorization documents such as test preparation sheets, discrepancy reports, pre-test briefing reports, and test requests.

Work injury rehabilitation and the tendency to return to work of workers with injuries in Mainland China.

PubMed

Ouyang, Ya Tao

2008-01-01

This paper aims to describe the current situation of the work injury rehabilitation system in China with its drawbacks, especially relating to the employment services for workers with injuries and bringing up the topic of the need for more work to attempt to construct a modern work injury occupational rehabilitation system: perfecting the administration mechanism of policy, establishing an occupational rehabilitation pattern with Chinese characteristics, establishing the socialization service network as the core of occupational rehabilitation and establishing a practical professional team and academic communication platform. These creative thoughts may shed light on the development of the work injury rehabilitation system as well as the return to work for workers with injuries in China.

An experimental study of nonlinear dynamic system identification

NASA Technical Reports Server (NTRS)

Stry, Greselda I.; Mook, D. Joseph

1990-01-01

A technique for robust identification of nonlinear dynamic systems is developed and illustrated using both simulations and analog experiments. The technique is based on the Minimum Model Error optimal estimation approach. A detailed literature review is included in which fundamental differences between the current approach and previous work is described. The most significant feature of the current work is the ability to identify nonlinear dynamic systems without prior assumptions regarding the form of the nonlinearities, in constrast to existing nonlinear identification approaches which usually require detailed assumptions of the nonlinearities. The example illustrations indicate that the method is robust with respect to prior ignorance of the model, and with respect to measurement noise, measurement frequency, and measurement record length.

New approaches for real time decision support systems

NASA Technical Reports Server (NTRS)

Hair, D. Charles; Pickslay, Kent

1994-01-01

NCCOSC RDT&E Division (NRaD) is conducting research into ways of improving decision support systems (DSS) that are used in tactical Navy decision making situations. The research has focused on the incorporation of findings about naturalistic decision-making processes into the design of the DSS. As part of that research, two computer tools were developed that model the two primary naturalistic decision-making strategies used by Navy experts in tactical settings. Current work is exploring how best to incorporate the information produced by those tools into an existing simulation of current Navy decision support systems. This work has implications for any applications involving the need to make decisions under time constraints, based on incomplete or ambiguous data.

Magnetic Suspension Technology Development

NASA Technical Reports Server (NTRS)

Britcher, Colin

1998-01-01

This Cooperative Agreement, intended to support focused research efforts in the area of magnetic suspension systems, was initiated between NASA Langley Research Center (LaRC) and Old Dominion University (ODU) starting January 1, 1997. The original proposal called for a three-year effort, but funding for the second year proved to be unavailable, leading to termination of the agreement following a 5-month no-cost extension. This report covers work completed during the entire 17-month period of the award. This research built on work that had taken place over recent years involving both NASA LARC and the Principal Investigator (PI). The research was of a rather fundamental nature, although specific applications were kept in mind at all times, such as wind tunnel Magnetic Suspension and Balance Systems (MSBS), space payload pointing and vibration isolation systems, magnetic bearings for unconventional applications, magnetically levitated ground transportation and electromagnetic launch systems. Fundamental work was undertaken in areas such as the development of optimized magnetic configurations, analysis and modelling of eddy current effects, control strategies for magnetically levitated wind tunnel models and system calibration procedures. Despite the termination of this Cooperative Agreement, several aspects of the research work are currently continuing with alternative forms of support.

Addressing Circuitous Currents MVDC Power Systems Protection

DTIC Science & Technology

2017-12-31

load . The converter modules are current-controlled buck converters. They are being controlled to provide a no - load voltage of 155V at their outputs...PAGE Form Approved 0MB No . 0704-0188 The public reporting burden for this collection of information is estimated to average 1 hour per response...distribution is unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT The work investigates Z-source breakers in multi-zone systems with current to the load through

Expert system shell to reason on large amounts of data

NASA Technical Reports Server (NTRS)

Giuffrida, Gionanni

1994-01-01

The current data base management systems (DBMS's) do not provide a sophisticated environment to develop rule based expert systems applications. Some of the new DBMS's come with some sort of rule mechanism; these are active and deductive database systems. However, both of these are not featured enough to support full implementation based on rules. On the other hand, current expert system shells do not provide any link with external databases. That is, all the data are kept in the system working memory. Such working memory is maintained in main memory. For some applications the reduced size of the available working memory could represent a constraint for the development. Typically these are applications which require reasoning on huge amounts of data. All these data do not fit into the computer main memory. Moreover, in some cases these data can be already available in some database systems and continuously updated while the expert system is running. This paper proposes an architecture which employs knowledge discovering techniques to reduce the amount of data to be stored in the main memory; in this architecture a standard DBMS is coupled with a rule-based language. The data are stored into the DBMS. An interface between the two systems is responsible for inducing knowledge from the set of relations. Such induced knowledge is then transferred to the rule-based language working memory.

Response assessment in neuro-oncology.

PubMed

Quant, Eudocia C; Wen, Patrick Y

2011-02-01

Accuracy and reproducibility in determining response to therapy and tumor progression can be difficult to achieve for nervous system tumors. Current response criteria vary depending on the pathology and have several limitations. Until recently, the most widely used criteria for gliomas were "Macdonald criteria," based on two-dimensional tumor measurements on neuroimaging studies. However, the Response Assessment in Neuro-Oncology (RANO) Working Group has published new recommendations in high-grade gliomas and is working on recommendations for other nervous system tumors. This article reviews current response criteria for high-grade glioma, low-grade glioma, brain metastasis, meningioma, and schwannoma.

What can we learn from noise? — Mesoscopic nonequilibrium statistical physics —

PubMed Central

KOBAYASHI, Kensuke

2016-01-01

Mesoscopic systems — small electric circuits working in quantum regime — offer us a unique experimental stage to explorer quantum transport in a tunable and precise way. The purpose of this Review is to show how they can contribute to statistical physics. We introduce the significance of fluctuation, or equivalently noise, as noise measurement enables us to address the fundamental aspects of a physical system. The significance of the fluctuation theorem (FT) in statistical physics is noted. We explain what information can be deduced from the current noise measurement in mesoscopic systems. As an important application of the noise measurement to statistical physics, we describe our experimental work on the current and current noise in an electron interferometer, which is the first experimental test of FT in quantum regime. Our attempt will shed new light in the research field of mesoscopic quantum statistical physics. PMID:27477456

What can we learn from noise? - Mesoscopic nonequilibrium statistical physics.

PubMed

Kobayashi, Kensuke

2016-01-01

Mesoscopic systems - small electric circuits working in quantum regime - offer us a unique experimental stage to explorer quantum transport in a tunable and precise way. The purpose of this Review is to show how they can contribute to statistical physics. We introduce the significance of fluctuation, or equivalently noise, as noise measurement enables us to address the fundamental aspects of a physical system. The significance of the fluctuation theorem (FT) in statistical physics is noted. We explain what information can be deduced from the current noise measurement in mesoscopic systems. As an important application of the noise measurement to statistical physics, we describe our experimental work on the current and current noise in an electron interferometer, which is the first experimental test of FT in quantum regime. Our attempt will shed new light in the research field of mesoscopic quantum statistical physics.

Constellation Program Thermal and Environmental Control and Life Support System Status: 2009 - 2010

NASA Technical Reports Server (NTRS)

Williams, David E.; Carrasquillo, Robyn L.; Bagdigian, Robert M.

2009-01-01

The Constellation Program (CxP) consists of spacecrafts, launch vehicles, and support systems to execute the Exploration Architecture. The Program is currently divided into three distinct phases. The first phase is to develop a vehicle to provide limited cargo resupply capability and allow crew member rotation to the International Space Station (ISS). The second phase is to support the return of humans to the moon. The final phase is currently envisioned to allow the delivery of humans and cargo to Mars for an extended time. To implement this phased approach the CxP is currently working on the first vehicle and support systems to replace the Space Shuttle and allow continued access to space. This paper provides a summary of the CxP Thermal and Environmental Control and Life Support (ECLS) work that that has occurred across the different parts of the Program in support of these three phases over the past year.

Application of Magnetic Suspension and Balance Systems to Ultra-High Reynolds Number Facilities

NASA Technical Reports Server (NTRS)

Britcher, Colin P.

1996-01-01

The current status of wind tunnel magnetic suspension and balance system development is briefly reviewed. Technical work currently underway at NASA Langley Research Center is detailed, where it relates to the ultra-high Reynolds number application. The application itself is addressed, concluded to be quite feasible, and broad design recommendations given.

Enhancing the Early Childhood Development System in Yakutia (Russia): Meeting the Challenges

ERIC Educational Resources Information Center

Kotnik, Jure; Shmis, Tigran

2011-01-01

The Yakutia Republic is currently working to update its early childhood development (ECD) system. Its goal is to ensure a high quality environment for early learning and child care and to enable higher enrolment levels. Currently, a high priority for the Government of Yakutia is to increase access to pre-school education, given the significant…

Discovering Open Source Discovery: Using VuFind to Create MnPALS Plus

ERIC Educational Resources Information Center

Digby, Todd; Elfstrand, Stephen

2011-01-01

The goal of having a robust discovery system is a priority of the libraries the authors serve (both work at the Minnesota State Colleges and Universities). Given the current fiscal situation facing public higher education in their state, the current commercial systems were not affordable for most of their libraries. They decided to implement and…

Database Tool for Master Console Operators

NASA Technical Reports Server (NTRS)

Ferrell, Sean

2018-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administration's (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires highly trained and knowledgeable personnel. Master Console Operators (MCO) are currently working on familiarizing themselves with any possible scenario that they may encounter. An intern was recruited to help assist them with creating a tool to use for the process.

Assessing the Impact of Development Disruptions and Dependencies in Analysis of Alternatives of System-of-Systems

DTIC Science & Technology

2012-12-31

WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Purdue University,West Lafayette,IN,47907 8. PERFORMING ORGANIZATION REPORT...operational independence, yet, must work cohesively to achieve an overarching set of capabilities. Current guidelines set forth by the Department of Defense...architectures; these methods will be further matured and enhanced in follow-up research work under RT-44. 15. SUBJECT TERMS 16. SECURITY

Returning Home in Systems of Care: Rates, Predictors, and Stability

ERIC Educational Resources Information Center

Farmer, Elizabeth M. Z.; Southerland, Dannia; Mustillo, Sarah A.; Burns, Barbara J.

2009-01-01

Recent work suggests that out-of-home placements continue to be relatively common for youth with mental health problems, even within systems of care. The current work examines rates and predictors of movement back home and stability of reunifications. During the focal period, 1,778 youths experienced out-of-home placements; 61% moved back home,…

School Social Workers and a Renewed Call to Advocacy

ERIC Educational Resources Information Center

Joseph, Alfred L., Jr.; Slovak, Karen; Broussard, C. Anne

2010-01-01

This article calls for school social workers to work in schools to reform school systems that have historically failed and are currently failing African American children. While the hope of education is to assist students to realize their potential, school systems across the nation are not reaching this goal. School social work has a duty, a…

2014 Overview of NASA GRC Electrochemical Power and Energy Storage Technology

NASA Technical Reports Server (NTRS)

Reid, Concha M.

2014-01-01

Overview presentation to the IAPG Chemical Working Group meeting, discussing current electrochemical power and energy storage R and D at NASA GRC including missions, demonstrations, and reserch projects. Activities such as ISS Lithium-Ion Battery Replacements, the Advanced Exploration Systems Modular Power Systems project, Enabling Electric Aviation with Ultra-High Energy Litium Metal Batteries, Advanced Space Power Systems project, and SBIR STTR work, will be discussed.

Sociotechnical attributes of safe and unsafe work systems.

PubMed

Kleiner, Brian M; Hettinger, Lawrence J; DeJoy, David M; Huang, Yuang-Hsiang; Love, Peter E D

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social-organisational and technical-work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human-system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human-systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social--organisational and technology--work process factors as they impact work system analysis, design and operation.

Eddy current spectroscopy for near-surface residual stress profiling in surface treated nonmagnetic engine alloys

NASA Astrophysics Data System (ADS)

Abu-Nabah, Bassam A.

Recent research results indicated that eddy current conductivity measurements can be exploited for nondestructive evaluation of near-surface residual stresses in surface-treated nickel-base superalloy components. Most of the previous experimental studies were conducted on highly peened (Almen 10-16A) specimens that exhibit harmful cold work in excess of 30% plastic strain. Such high level of cold work causes thermo-mechanical relaxation at relatively modest operational temperatures; therefore the obtained results were not directly relevant to engine manufacturers and end users. The main reason for choosing peening intensities in excess of recommended normal levels was that in low-conductivity engine alloys the eddy current penetration depth could not be forced below 0.2 mm without expanding the measurements above 10 MHz which is beyond the operational range of most commercial eddy current instruments. As for shot-peened components, it was initially felt that the residual stress effect was more difficult to separate from cold work, texture, and inhomogeneity effects in titanium alloys than in nickel-base superalloys. In addition, titanium alloys have almost 50% lower electric conductivity than nickel-base superalloys; therefore require proportionally higher inspection frequencies, which was not feasible until our recent breakthrough in instrument development. Our work has been focused on six main aspects of this continuing research, namely, (i) the development of an iterative inversion technique to better retrieve the depth-dependent conductivity profile from the measured frequency-dependent apparent eddy current conductivity (AECC), (ii) the extension of the frequency range up to 80 MHz to better capture the peak compressive residual stress in nickel-base superalloys using a new eddy current conductivity measuring system, which offers better reproducibility, accuracy and measurement speed than the previously used conventional systems, (iii) the lift-off effect on high frequency eddy current spectroscopy, (iv) the development of custom-made spiral coils to allow eddy current conductivity characterization over the whole frequency range of interest with reduced coil sensitivity to lift off, (v) the benefits of implementing a semi-quadratic system calibration in reducing the coil sensitivity to lift-off, and (vi) the feasibility of adapting high-frequency eddy current residual stress characterization for shot-peened titanium alloys.

Cavity Mediated Manipulation of Distant Spin Currents Using a Cavity-Magnon-Polariton.

PubMed

Bai, Lihui; Harder, Michael; Hyde, Paul; Zhang, Zhaohui; Hu, Can-Ming; Chen, Y P; Xiao, John Q

2017-05-26

Using electrical detection of a strongly coupled spin-photon system comprised of a microwave cavity mode and two magnetic samples, we demonstrate the long distance manipulation of spin currents. This distant control is not limited by the spin diffusion length, instead depending on the interplay between the local and global properties of the coupled system, enabling systematic spin current control over large distance scales (several centimeters in this work). This flexibility opens the door to improved spin current generation and manipulation for cavity spintronic devices.

Measurement and Characterization of Concentrator Solar Cells II

NASA Technical Reports Server (NTRS)

Scheiman, Dave; Sater, Bernard L.; Chubb, Donald; Jenkins, Phillip; Snyder, Dave

2005-01-01

Concentrator solar cells are continuing to get more consideration for use in power systems. This interest is because concentrator systems can have a net lower cost per watt in solar cell materials plus ongoing improvements in sun-tracking technology. Quantitatively measuring the efficiency of solar cells under concentration is difficult. Traditionally, the light concentration on solar cells has been determined by using a ratio of the measured solar cell s short circuit current to that at one sun, this assumes that current changes proportionally with light intensity. This works well with low to moderate (<20 suns) concentration levels on "well-behaved" linear cells but does not apply when cells respond superlinearly, current increases faster than intensity, or sublinearly, current increases more slowly than intensity. This paper continues work on using view factors to determine the concentration level and linearity of the solar cell with mathematical view factor analysis and experimental results [1].

Communications and Intelligent Systems Division Overview

NASA Technical Reports Server (NTRS)

Emerson, Dawn

2017-01-01

This presentation provides an overview of the research and engineering work being performed in the competency fields of advanced communications and intelligent systems with emphasis on advanced technologies, architecture definition, and systems development for application in current and future aeronautics and space communications systems.

Communications and Intelligent Systems Division - Division Overview

NASA Technical Reports Server (NTRS)

Miranda, Felix A.

2017-01-01

This presentation provides an overview of the research and engineering work being performed in the competency fields of advanced communications and intelligent systems with emphasis on advanced technologies, architecture definition,and systems development for application in current and future aeronautics and space communications systems.

Communications and Intelligent Systems Division - Division Overview

NASA Technical Reports Server (NTRS)

Miranda, Felix A.

2017-01-01

This presentation provides an overview of the research and engineering work being performed in the competency fields of advanced communications and intelligent systems with emphasis on advanced technologies, architecture definition, and systems development for application in current and future aeronautics and space communications systems.

Using the Git Software Tool on the Peregrine System | High-Performance

Science.gov Websites

branch workflow. Create a local branch called "experimental" based on the current master... git branch experimental Use your branch (start working on that experimental branch....) git checkout experimental git pull origin experimental # work, work, work, commit.... Send local branch to the repo git push

A complete electrical shock hazard classification system and its application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon, Lloyd; Cartelli, Laura; Graham, Nicole

Current electrical safety standards evolved to address the hazards of 60-Hz power that are faced primarily by electricians, linemen, and others performing facility and utility work. As a result, this leaves a substantial gap in the management of electrical hazards in Research and Development (R&D) and specialized high voltage and high power equipment. We find substantial use of direct current (dc) electrical energy, and the use of capacitors, inductors, batteries, and radiofrequency (RF) power. The electrical hazards of these forms of electricity and their systems are different than for 50/60 Hz power. This paper proposes a method of classifying allmore » of the electrical shock hazards found in all types of R&D and utilization equipment. Examples of the variation of these hazards from NFPA 70E include (a) high voltage can be harmless, if the available current is sufficiently low, (b) low voltage can be harmful if the available current/power is high, (c) high voltage capacitor hazards are unique and include severe reflex action, affects on the heart, and tissue damage, and (d) arc flash hazard analysis for dc and capacitor systems are not provided in existing standards. This work has led to a comprehensive electrical hazard classification system that is based on various research conducted over the past 100 years, on analysis of such systems in R&D, and on decades of experience. Lastly, the new comprehensive electrical shock hazard classification system uses a combination of voltage, shock current available, fault current available, power, energy, and waveform to classify all forms of electrical hazards.« less

A complete electrical shock hazard classification system and its application

DOE PAGES

Gordon, Lloyd; Cartelli, Laura; Graham, Nicole

2018-02-08

Current electrical safety standards evolved to address the hazards of 60-Hz power that are faced primarily by electricians, linemen, and others performing facility and utility work. As a result, this leaves a substantial gap in the management of electrical hazards in Research and Development (R&D) and specialized high voltage and high power equipment. We find substantial use of direct current (dc) electrical energy, and the use of capacitors, inductors, batteries, and radiofrequency (RF) power. The electrical hazards of these forms of electricity and their systems are different than for 50/60 Hz power. This paper proposes a method of classifying allmore » of the electrical shock hazards found in all types of R&D and utilization equipment. Examples of the variation of these hazards from NFPA 70E include (a) high voltage can be harmless, if the available current is sufficiently low, (b) low voltage can be harmful if the available current/power is high, (c) high voltage capacitor hazards are unique and include severe reflex action, affects on the heart, and tissue damage, and (d) arc flash hazard analysis for dc and capacitor systems are not provided in existing standards. This work has led to a comprehensive electrical hazard classification system that is based on various research conducted over the past 100 years, on analysis of such systems in R&D, and on decades of experience. Lastly, the new comprehensive electrical shock hazard classification system uses a combination of voltage, shock current available, fault current available, power, energy, and waveform to classify all forms of electrical hazards.« less

Integrating Social Justice in Group Work: The Next Decade

ERIC Educational Resources Information Center

Hays, Danica G.; Arredondo, Patricia; Gladding, Samuel T.; Toporek, Rebecca L.

2010-01-01

Group work can be an effective outlet for facilitating client empowerment at individual and systemic levels. This article outlines strategies for increasing attention to social justice issues in group work over the next decade within education, training, supervision, practice, and research. Drawing from historical perspectives, current literature,…

| NREL

Science.gov Websites

Greg.Glatzmaier@nrel.gov | 303-384-7470 Greg originally joined NREL in 1987 and worked in the Solar Thermal work on systems analysis, novel heat-transfer fluids, and thermal-storage concepts for CSP technologies . He currently manages the advanced heat-transfer fluids and thermal-storage work at NREL. Education

Intelligent vehicle electrical power supply system with central coordinated protection

NASA Astrophysics Data System (ADS)

Yang, Diange; Kong, Weiwei; Li, Bing; Lian, Xiaomin

2016-07-01

The current research of vehicle electrical power supply system mainly focuses on electric vehicles (EV) and hybrid electric vehicles (HEV). The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect; electrical/electronic devices (EEDs) applied in vehicles are usually directly connected with the vehicle's battery. With increasing numbers of EEDs being applied in traditional fuel vehicles, vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively. In this paper, a new vehicle electrical power supply system for traditional fuel vehicles, which accounts for all electrical/electronic devices and complex work conditions, is proposed based on a smart electrical/electronic device (SEED) system. Working as an independent intelligent electrical power supply network, the proposed system is isolated from the electrical control module and communication network, and access to the vehicle system is made through a bus interface. This results in a clean controller power supply with no electromagnetic interference. A new practical battery state of charge (SoC) estimation method is also proposed to achieve more accurate SoC estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel. Optimized protection methods are also used to ensure power supply safety. Experiments and tests on a traditional fuel vehicle are performed, and the results reveal that the battery SoC is calculated quickly and sufficiently accurately for battery over-discharge protection. Over-current protection is achieved, and the entire vehicle's power utilization is optimized. For traditional fuel vehicles, the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture, enhancing system reliability and security.

Current-induced changes of migration energy barriers in graphene and carbon nanotubes.

PubMed

Obodo, J T; Rungger, I; Sanvito, S; Schwingenschlögl, U

2016-05-21

An electron current can move atoms in a nanoscale device with important consequences for the device operation and breakdown. We perform first principles calculations aimed at evaluating the possibility of changing the energy barriers for atom migration in carbon-based systems. In particular, we consider the migration of adatoms and defects in graphene and carbon nanotubes. Although the current-induced forces are large for both the systems, in graphene the force component along the migration path is small and therefore the barrier height is little affected by the current flow. In contrast, the same barrier is significantly reduced in carbon nanotubes as the current increases. Our work also provides a real-system numerical demonstration that current-induced forces within density functional theory are non-conservative.

Foundations for a syntatic pattern recognition system for genomic DNA sequences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Searles, D.B.

1993-03-01

The goal of the proposed work is the creation of a software system that will perform sophisticated pattern recognition and related functions at a level of abstraction and with expressive power beyond current general-purpose pattern-matching systems for biological sequences; and with a more uniform language, environment, and graphical user interface, and with greater flexibility, extensibility, embeddability, and ability to incorporate other algorithms, than current special-purpose analytic software.

Russia and the United States: Future Implications of Historical Relationships

DTIC Science & Technology

2009-04-01

paper relates the theory to the current unipolar international structure and states how the U.S.-Russian relationship could proceed in the future...explained by realist states working inside of the ―capitalist world system.‖ The paper relates the theory to the current unipolar international...inside a world system. One theory of the world system is based on the concept of a capitalist world economy whose efficiency-seeking transnational

Integrated multimedia information system on interactive CATV network

NASA Astrophysics Data System (ADS)

Lee, Meng-Huang; Chang, Shin-Hung

1998-10-01

In the current CATV system architectures, they provide one- way delivery of a common menu of entertainment to all the homes through the cable network. Through the technologies evolution, the interactive services (or two-way services) can be provided in the cable TV systems. They can supply customers with individualized programming and support real- time two-way communications. With a view to the service type changed from the one-way delivery systems to the two-way interactive systems, `on demand services' is a distinct feature of multimedia systems. In this paper, we present our work of building up an integrated multimedia system on interactive CATV network in Shih Chien University. Besides providing the traditional analog TV programming from the cable operator, we filter some channels to reserve them as our campus information channels. In addition to the analog broadcasting channel, the system also provides the interactive digital multimedia services, e.g. Video-On- Demand (VOD), Virtual Reality, BBS, World-Wide-Web, and Internet Radio Station. These two kinds of services are integrated in a CATV network by the separation of frequency allocation for the analog broadcasting service and the digital interactive services. Our ongoing work is to port our previous work of building up a VOD system conformed to DAVIC standard (for inter-operability concern) on Ethernet network into the current system.

Auroral Substorms: Search for Processes Causing the Expansion Phase in Terms of the Electric Current Approach

NASA Astrophysics Data System (ADS)

Akasofu, Syun-Ichi

2017-10-01

Auroral substorms are mostly manifestations of dissipative processes of electromagnetic energy. Thus, we consider a sequence of processes consisting of the power supply (dynamo), transmission (currents/circuits) and dissipations (auroral substorms-the end product), namely the electric current line approach. This work confirms quantitatively that after accumulating magnetic energy during the growth phase, the magnetosphere unloads the stored magnetic energy impulsively in order to stabilize itself. This work is based on our result that substorms are caused by two current systems, the directly driven (DD) current system and the unloading system (UL). The most crucial finding in this work is the identification of the UL (unloading) current system which is responsible for the expansion phase. A very tentative sequence of the processes leading to the expansion phase (the generation of the UL current system) is suggested for future discussions. (1) The solar wind-magnetosphere dynamo enhances significantly the plasma sheet current when its power is increased above 10^{18} erg/s (10^{11} w). (2) The magnetosphere accumulates magnetic energy during the growth phase, because the ionosphere cannot dissipate the increasing power because of a low conductivity. As a result, the magnetosphere is inflated, accumulating magnetic energy. (3) When the power reaches 3-5× 10^{18} erg/s (3-5× 10^{11} w) for about one hour and the stored magnetic energy reaches 3-5×10^{22} ergs (10^{15} J), the magnetosphere begins to develop perturbations caused by current instabilities (the current density {≈}3× 10^{-12} A/cm2 and the total current {≈}106 A at 6 Re). As a result, the plasma sheet current is reduced. (4) The magnetosphere is thus deflated. The current reduction causes partial B/partial t > 0 in the main body of the magnetosphere, producing an earthward electric field. As it is transmitted to the ionosphere, it becomes equatorward-directed electric field which drives both Pedersen and Hall currents and thus generates the UL current system. (5) A significant part of the magnetic energy is accumulated in the main body of the magnetosphere (the inner plasma sheet) between 4 Re and 10 Re, because the power (Poynting flux [ E × B ]) is mainly directed toward this region which can hold the substorm energy. (6) The substorm intensity depends on the location of the energy accumulation (between 4 Re and 10 Re), the closer the location to the earth, the more intense substorms becomes, because the capacity of holding the energy is higher at closer distances. The convective flow toward the earth brings both the ring current and the plasma sheet current closer when the dynamo power becomes higher. This proposed sequence is not necessarily new. Individual processes involved have been considered by many, but the electric current approach can bring them together systematically and provide some new quantitative insights.

Multi-Modal Traveler Information System - Alternative GCM Corridor Technologies and Strategies

DOT National Transportation Integrated Search

1997-10-24

The purpose of this working paper is to summarize current and evolving Intelligent Transportation System (ITS) technologies and strategies related to the design, development, and deployment of regional multi-modal traveler information systems. This r...

Pocket Handbook on Reliability

DTIC Science & Technology

1975-09-01

exponencial distributions Weibull distribution, -xtimating reliability, confidence intervals, relia- bility growth, 0. P- curves, Bayesian analysis. 20 A S...introduction for those not familiar with reliability and a good refresher for those who are currently working in the area. LEWIS NERI, CHIEF...includes one or both of the following objectives: a) prediction of the current system reliability, b) projection on the system reliability for someI future

Synaptic Correlates of Working Memory Capacity.

PubMed

Mi, Yuanyuan; Katkov, Mikhail; Tsodyks, Misha

2017-01-18

Psychological studies indicate that human ability to keep information in readily accessible working memory is limited to four items for most people. This extremely low capacity severely limits execution of many cognitive tasks, but its neuronal underpinnings remain unclear. Here we show that in the framework of synaptic theory of working memory, capacity can be analytically estimated to scale with characteristic time of short-term synaptic depression relative to synaptic current time constant. The number of items in working memory can be regulated by external excitation, enabling the system to be tuned to the desired load and to clear the working memory of currently held items to make room for new ones. Copyright © 2017 Elsevier Inc. All rights reserved.

Export Control Requirements for Tritium Processing Design and R&D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollis, William Kirk; Maynard, Sarah-Jane Wadsworth

This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance documentmore » has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.« less

Export Control Requirements for Tritium Processing Design and R&D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollis, William Kirk; Maynard, Sarah-Jane Wadsworth

2015-10-30

This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance documentmore » has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.« less

A Conceptual Model for Analysing Collaborative Work and Products in Groupware Systems

NASA Astrophysics Data System (ADS)

Duque, Rafael; Bravo, Crescencio; Ortega, Manuel

Collaborative work using groupware systems is a dynamic process in which many tasks, in different application domains, are carried out. Currently, one of the biggest challenges in the field of CSCW (Computer-Supported Cooperative Work) research is to establish conceptual models which allow for the analysis of collaborative activities and their resulting products. In this article, we propose an ontology that conceptualizes the required elements which enable an analysis to infer a set of analysis indicators, thus evaluating both the individual and group work and the artefacts which are produced.

Potential for Expanding the Near Real Time ForWarn Regional Forest Monitoring System to Include Alaska

NASA Technical Reports Server (NTRS)

Spruce, Joseph P.; Gasser, Gerald; Hargrove, William; Smoot, James; Kuper, Philip D.

2014-01-01

The on-line near real time (NRT) ForWarn system is currently deployed to monitor regional forest disturbances within the conterminous United States (CONUS), using daily MODIS Aqua and Terra NDVI data to derive monitoring products. The Healthy Forest Restoration Act of 2003 mandated such a system. Work on ForWarn began in 2006 with development and validation of retrospective MODIS NDVI-based forest monitoring products. Subsequently, NRT forest disturbance monitoring products were demonstrated, leading to the actual system deployment in 2010. ForWarn provides new CONUS forest disturbance monitoring products every 8 days, using USGS eMODIS data for current NDVI. ForWarn currently does not cover Alaska, which includes extensive forest lands at risk to multiple biotic and abiotic threats. This poster discusses a case study using Alaska eMODIS Terra data to derive ForWarn like forest change products during the 2010 growing season. The eMODIS system provides current MODIS Terra NDVI products for Alaska. Resulting forest change products were assessed with ground, aerial, and Landsat reference data. When cloud and snow free, these preliminary products appeared to capture regional forest disturbances from insect defoliation and fires; however, more work is needed to mitigate cloud and snow contamination, including integration of eMODIS Aqua data.

An accurate online calibration system based on combined clamp-shape coil for high voltage electronic current transformers.

PubMed

Li, Zhen-hua; Li, Hong-bin; Zhang, Zhi

2013-07-01

Electronic transformers are widely used in power systems because of their wide bandwidth and good transient performance. However, as an emerging technology, the failure rate of electronic transformers is higher than that of traditional transformers. As a result, the calibration period needs to be shortened. Traditional calibration methods require the power of transmission line be cut off, which results in complicated operation and power off loss. This paper proposes an online calibration system which can calibrate electronic current transformers without power off. In this work, the high accuracy standard current transformer and online operation method are the key techniques. Based on the clamp-shape iron-core coil and clamp-shape air-core coil, a combined clamp-shape coil is designed as the standard current transformer. By analyzing the output characteristics of the two coils, the combined clamp-shape coil can achieve verification of the accuracy. So the accuracy of the online calibration system can be guaranteed. Moreover, by employing the earth potential working method and using two insulating rods to connect the combined clamp-shape coil to the high voltage bus, the operation becomes simple and safe. Tests in China National Center for High Voltage Measurement and field experiments show that the proposed system has a high accuracy of up to 0.05 class.

Human Aided Reinforcement Learning in Complex Environments

DTIC Science & Technology

learn to solve tasks through a trial -and- error process. As an agent takes ...task faster andmore accurately, a human expert can be added to the system to guide an agent in solving the task. This project seeks to expand on current...theenvironment, which works particularly well for reactive tasks . In more complex tasks , these systems do not work as intended. The manipulation

Tearing Instability of a Current Sheet Forming by Sheared Incompressible Flow

NASA Astrophysics Data System (ADS)

Tolman, Elizabeth; Loureiro, Nuno; Uzdensky, Dmitri

2017-10-01

Sweet-Parker current sheets are unstable to the tearing mode, suggesting they will not form in physical systems. Understanding magnetic reconnection thus requires study of the stability of a current sheet as it forms. Such formation can occur as a result of sheared, sub-Alfvénic incompressible flows into and along the sheet. This work presents an analysis of how tearing perturbations behave in a current sheet forming under the influence of such flows, beginning with a phase when the growth rate of the tearing mode is small and the behavior of perturbations is primarily governed by ideal MHD. Later, after the tearing growth rate becomes significant relative to the time scale of the driving flows, the flows cause a slight reduction in the tearing growth rate and wave vector of the dominant mode. Once the tearing mode enters the nonlinear regime, the flows accelerate the tearing growth slightly; during X-point collapse, the flows have negligible effect on the system behavior. This analysis allows greater understanding of reconnection in evolving systems and increases confidence in the application of tools developed in time-independent current sheets to changing current sheets. This material is based upon work supported by the National Science Foundation Graduate Research Fellowship.

Progress Check Module; Basic Electricity and Electronics Individualized Learning System. Progress Check Booklet.

ERIC Educational Resources Information Center

Bureau of Naval Personnel, Washington, DC.

The Progress Check Booklet is designed to be used by the student working in the programed course to determine if he has mastered the concepts in the course booklets on: electrical current; voltage; resistance; measuring current and voltage in series circuits; relationships of current, voltage, and resistance; parellel circuits; combination…

An optically coupled system for quantitative monitoring of MRI gradient currents induced into endocardial leads.

PubMed

Mattei, E; Calcagnini, G; Triventi, M; Delogu, A; Del Guercio, M; Angeloni, A; Bartolini, P

2013-01-01

The time-varying gradient fields generated during Magnetic Resonance Imaging (MRI) procedures have the potential to induce electrical current on implanted endocardial leads. Whether this current can result in undesired cardiac stimulation is unknown. This paper presents an optically coupled system with the potential to quantitatively measure the currents induced by the gradient fields into endocardial leads during MRI procedures. Our system is based on a microcontroller that works as analog-to-digital (A/D) converter and sends the current signal acquired from the lead to an optical high-speed light-emitting-diode transmitter. Plastic fiber guides the light outside the MRI chamber, to a photodiode receiver and then to an acquisition board connected to a PC. The preliminary characterization of the performances of the system is also presented.

Effects of imbalanced currents on large-format LiFePO4/graphite batteries systems connected in parallel

NASA Astrophysics Data System (ADS)

Shi, Wei; Hu, Xiaosong; Jin, Chao; Jiang, Jiuchun; Zhang, Yanru; Yip, Tony

2016-05-01

With the development and popularization of electric vehicles, it is urgent and necessary to develop effective management and diagnosis technology for battery systems. In this work, we design a parallel battery model, according to equivalent circuits of parallel voltage and branch current, to study effects of imbalanced currents on parallel large-format LiFePO4/graphite battery systems. Taking a 60 Ah LiFePO4/graphite battery system manufactured by ATL (Amperex Technology Limited, China) as an example, causes of imbalanced currents in the parallel connection are analyzed using our model, and the associated effect mechanisms on long-term stability of each single battery are examined. Theoretical and experimental results show that continuously increasing imbalanced currents during cycling are mainly responsible for the capacity fade of LiFePO4/graphite parallel batteries. It is thus a good way to avoid fast performance fade of parallel battery systems by suppressing variations of branch currents.

400 South corridor assessment.

DOT National Transportation Integrated Search

2017-03-01

Local transportation agencies in the Salt Lake City (SLC) Metropolitan Area spent more than a decade : working toward building a sustainable regional transportation system. Light Rail Transit (LRT) is an : integral part of that system. Currently, thr...

A Systematic Review of Wearable Systems for Cancer Detection: Current State and Challenges.

PubMed

Ray, Partha Pratim; Dash, Dinesh; De, Debashis

2017-10-02

Rapid growth of sensor and computing platforms have introduced the wearable systems. In recent years, wearable systems have led to new applications across all medical fields. The aim of this review is to present current state-of-the-art approach in the field of wearable system based cancer detection and identify key challenges that resist it from clinical adoption. A total of 472 records were screened and 11 were finally included in this study. Two types of records were studied in this context that includes 45% research articles and 55% manufactured products. The review was performed per PRISMA guidelines where considerations was given to records that were published or reported between 2009 and 2017. The identified records included 4 cancer detecting wearable systems such as breast cancer (36.3%), skin cancer (36.3%), prostate cancer (18.1%), and multi-type cancer (9%). Most works involved sensor based smart systems comprising of microcontroller, Bluetooth module, and smart phone. Few demonstrated Ultra-Wide Band (i.e. UWB) antenna based wearable systems. Skin cancer detecting wearable systems were most comprehensible ones. The current works are gradually progressing with seamless integration of sensory units along with smart networking. However, they lack in cloud computing and long-range communication paradigms. Artificial intelligence and machine learning are key ports that need to be attached with current wearable systems. Further, clinical inertia, lack of awareness, and high cost are altogether pulling back the actual growth of such system. It is well comprehended that upon sincere orientation of all identified challenges, wearable systems would emerge as vital alternative to futuristic cancer detection.

Bipolar square-wave current source for transient electromagnetic systems based on constant shutdown time

NASA Astrophysics Data System (ADS)

Wang, Shilong; Yin, Changchun; Lin, Jun; Yang, Yu; Hu, Xueyan

2016-03-01

Cooperative work of multiple magnetic transmitting sources is a new trend in the development of transient electromagnetic system. The key is the bipolar current waves shutdown, concurrently in the inductive load. In the past, it was difficult to use the constant clamping voltage technique to realize the synchronized shutdown of currents with different peak values. Based on clamping voltage technique, we introduce a new controlling method with constant shutdown time. We use the rising time to control shutdown time and use low voltage power source to control peak current. From the viewpoint of the circuit energy loss, by taking the high-voltage capacitor bypass resistance and the capacitor of the passive snubber circuit into account, we establish the relationship between the rising time and the shutdown time. Since the switch is not ideal, we propose a new method to test the shutdown time by the low voltage, the high voltage and the peak current. Experimental results show that adjustment of the current rising time can precisely control the value of the clamp voltage. When the rising time is fixed, the shutdown time is unchanged. The error for shutdown time deduced from the energy consumption is less than 6%. The new controlling method on current shutdown proposed in this paper can be used in the cooperative work of borehole and ground transmitting system.

Bipolar square-wave current source for transient electromagnetic systems based on constant shutdown time.

PubMed

Wang, Shilong; Yin, Changchun; Lin, Jun; Yang, Yu; Hu, Xueyan

2016-03-01

Cooperative work of multiple magnetic transmitting sources is a new trend in the development of transient electromagnetic system. The key is the bipolar current waves shutdown, concurrently in the inductive load. In the past, it was difficult to use the constant clamping voltage technique to realize the synchronized shutdown of currents with different peak values. Based on clamping voltage technique, we introduce a new controlling method with constant shutdown time. We use the rising time to control shutdown time and use low voltage power source to control peak current. From the viewpoint of the circuit energy loss, by taking the high-voltage capacitor bypass resistance and the capacitor of the passive snubber circuit into account, we establish the relationship between the rising time and the shutdown time. Since the switch is not ideal, we propose a new method to test the shutdown time by the low voltage, the high voltage and the peak current. Experimental results show that adjustment of the current rising time can precisely control the value of the clamp voltage. When the rising time is fixed, the shutdown time is unchanged. The error for shutdown time deduced from the energy consumption is less than 6%. The new controlling method on current shutdown proposed in this paper can be used in the cooperative work of borehole and ground transmitting system.

Experimental Forecasts of Wildfire Pollution at the Canadian Meteorological Centre

NASA Astrophysics Data System (ADS)

Pavlovic, Radenko; Beaulieu, Paul-Andre; Chen, Jack; Landry, Hugo; Cousineau, Sophie; Moran, Michael

2016-04-01

Environment and Climate Change Canada's Canadian Meteorological Centre Operations division (CMCO) has been running an experimental North American air quality forecast system with near-real-time wildfire emissions since 2014. This system, named FireWork, also takes anthropogenic and other natural emission sources into account. FireWork 48-hour forecasts are provided to CMCO forecasters and external partners in Canada and the U.S. twice daily during the wildfire season. This system has proven to be very useful in capturing short- and long-range smoke transport from wildfires over North America. Several upgrades to the FireWork system have been made since 2014 to accommodate the needs of operational AQ forecasters and to improve system performance. In this talk we will present performance statistics and some case studies for the 2014 and 2015 wildfire seasons. We will also describe current limitations of the FireWork system and ongoing and future work planned for this air quality forecast system.

Long-range eye tracking: A feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayaweera, S.K.; Lu, Shin-yee

1994-08-24

The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

Bipolar Ag-Zn battery

NASA Astrophysics Data System (ADS)

Giltner, L. John

1994-02-01

The silver-zinc (AgZn) battery system has been unique in its ability to safely satisfy high power demand applications with low mass and volume. However, a new generation of defense, aerospace, and commercial applications will impose even higher power demands. These new power demands can be satisfied by the development of a bipolar battery design. In this configuration the power consuming, interelectrode current conductors are eliminated while the current is then conducted via the large cross-section electrode substrate. Negative and positive active materials are applied to opposite sides of a solid silver foil substrate. In addition to reducing the weight and volume required for a specified power level, the output voltage performance is also improved as follows. Reduced weight through: elimination of the plastic cell container; elimination of plate leads and intercell connector; and elimination of internal plate current collector. Increased voltage through: elimination of resistance of current collector; elimination of resistance of plate lead; and elimination of resistance of intercell connector. EPI worked previously on development of a secondary bipolar silver zinc battery. This development demonstrated the electrical capability of the system and manufacturing techniques. One difficulty with this development was mechanical problems with the seals. However, recent improvements in plastics and adhesives should eliminate the major problem of maintaining a seal around the periphery of the bipolar module. The seal problem is not as significant for a primary battery application or for a requirement for only a few discharge cycles. A second difficulty encountered was with activation (introducing electrolyte into the cell) and with venting gas from the cell without loss of electrolyte. During previous work, the following projections for energy density were made from test data for a high power system which demonstrated in excess of 50 discharge/charge cycles. Projected system power = 100 kilowatts; discharge time = 30 seconds; discharge current density = 1.75 amps/sq in.; system weight = 86 lbs (9.7 WH/lb); and system volume = 1071 cu. in. (.78 WH/cu. in.). EPI is currently working on a development program to produce a bipolar silver-zinc battery design for NASA. The potential application would be to power electromechanical actuators for space launch vehicles.

Bipolar Ag-Zn battery

NASA Technical Reports Server (NTRS)

Giltner, L. John

1994-01-01

The silver-zinc (AgZn) battery system has been unique in its ability to safely satisfy high power demand applications with low mass and volume. However, a new generation of defense, aerospace, and commercial applications will impose even higher power demands. These new power demands can be satisfied by the development of a bipolar battery design. In this configuration the power consuming, interelectrode current conductors are eliminated while the current is then conducted via the large cross-section electrode substrate. Negative and positive active materials are applied to opposite sides of a solid silver foil substrate. In addition to reducing the weight and volume required for a specified power level, the output voltage performance is also improved as follows. Reduced weight through: elimination of the plastic cell container; elimination of plate leads and intercell connector; and elimination of internal plate current collector. Increased voltage through: elimination of resistance of current collector; elimination of resistance of plate lead; and elimination of resistance of intercell connector. EPI worked previously on development of a secondary bipolar silver zinc battery. This development demonstrated the electrical capability of the system and manufacturing techniques. One difficulty with this development was mechanical problems with the seals. However, recent improvements in plastics and adhesives should eliminate the major problem of maintaining a seal around the periphery of the bipolar module. The seal problem is not as significant for a primary battery application or for a requirement for only a few discharge cycles. A second difficulty encountered was with activation (introducing electrolyte into the cell) and with venting gas from the cell without loss of electrolyte. During previous work, the following projections for energy density were made from test data for a high power system which demonstrated in excess of 50 discharge/charge cycles. Projected system power = 100 kilowatts; discharge time = 30 seconds; discharge current density = 1.75 amps/sq in.; system weight = 86 lbs (9.7 WH/lb); and system volume = 1071 cu. in. (.78 WH/cu. in.). EPI is currently working on a development program to produce a bipolar silver-zinc battery design for NASA. The potential application would be to power electromechanical actuators for space launch vehicles.

Spaceport Command and Control System Automated Testing

NASA Technical Reports Server (NTRS)

Stein, Meriel

2017-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Spaceport Command and Control System Automation Testing

NASA Technical Reports Server (NTRS)

Hwang, Andrew

2017-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Sociotechnical attributes of safe and unsafe work systems

PubMed Central

Kleiner, Brian M.; Hettinger, Lawrence J.; DeJoy, David M.; Huang, Yuang-Hsiang; Love, Peter E.D.

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social–organisational and technical–work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human–system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human–systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. Practitioner Summary: The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social–organisational and technology–work process factors as they impact work system analysis, design and operation. PMID:25909756

Scenarios, personas and user stories from design ethnography: Evidence-based design representations of communicable disease investigations

PubMed Central

Turner, Anne M; Reeder, Blaine; Ramey, Judith

2014-01-01

Purpose Despite years of effort and millions of dollars spent to create a unified electronic communicable disease reporting systems, the goal remains elusive. A major barrier has been a lack of understanding by system designers of communicable disease (CD) work and the public health workers who perform this work. This study reports on the application of User Center Design representations, traditionally used for improving interface design, to translate the complex CD work identified through ethnographic studies to guide designers and developers of CD systems. The purpose of this work is to: (1) better understand public health practitioners and their information workflow with respect to communicable disease (CD) monitoring and control at a local health department, and (2) to develop evidence-based design representations that model this CD work to inform the design of future disease surveillance systems. Methods We performed extensive onsite semi-structured interviews, targeted work shadowing and a focus group to characterize local health department communicable disease workflow. Informed by principles of design ethnography and user-centered design (UCD) we created persona, scenarios and user stories to accurately represent the user to system designers. Results We sought to convey to designers the key findings from ethnographic studies: 1) that public health CD work is mobile and episodic, in contrast to current CD reporting systems, which are stationary and fixed 2) health department efforts are focused on CD investigation and response rather than reporting and 3) current CD information systems must conform to PH workflow to ensure their usefulness. In an effort to illustrate our findings to designers, we developed three contemporary design-support representations: persona, scenario, and user story. Conclusions Through application of user centered design principles, we were able to create design representations that illustrate complex public health communicable disease workflow and key user characteristics to inform the design of CD information systems for public health. PMID:23618996

Scenarios, personas and user stories: user-centered evidence-based design representations of communicable disease investigations.

PubMed

Turner, Anne M; Reeder, Blaine; Ramey, Judith

2013-08-01

Despite years of effort and millions of dollars spent to create unified electronic communicable disease reporting systems, the goal remains elusive. A major barrier has been a lack of understanding by system designers of communicable disease (CD) work and the public health workers who perform this work. This study reports on the application of user-centered design representations, traditionally used for improving interface design, to translate the complex CD work identified through ethnographic studies to guide designers and developers of CD systems. The purpose of this work is to: (1) better understand public health practitioners and their information workflow with respect to CD monitoring and control at a local health agency, and (2) to develop evidence-based design representations that model this CD work to inform the design of future disease surveillance systems. We performed extensive onsite semi-structured interviews, targeted work shadowing and a focus group to characterize local health agency CD workflow. Informed by principles of design ethnography and user-centered design we created persona, scenarios and user stories to accurately represent the user to system designers. We sought to convey to designers the key findings from ethnographic studies: (1) public health CD work is mobile and episodic, in contrast to current CD reporting systems, which are stationary and fixed, (2) health agency efforts are focused on CD investigation and response rather than reporting and (3) current CD information systems must conform to public health workflow to ensure their usefulness. In an effort to illustrate our findings to designers, we developed three contemporary design-support representations: persona, scenario, and user story. Through application of user-centered design principles, we were able to create design representations that illustrate complex public health communicable disease workflow and key user characteristics to inform the design of CD information systems for public health. Copyright © 2013 Elsevier Inc. All rights reserved.

Functional structure and dynamics of the human nervous system

NASA Technical Reports Server (NTRS)

Lawrence, J. A.

1981-01-01

The status of an effort to define the directions needed to take in extending pilot models is reported. These models are needed to perform closed-loop (man-in-the-loop) feedback flight control system designs and to develop cockpit display requirements. The approach taken is to develop a hypothetical working model of the human nervous system by reviewing the current literature in neurology and psychology and to develop a computer model of this hypothetical working model.

The Library Work Order Processing System: A New Approach to Motivate Employees and to Increase Production in the Technical Service Department of Mercer County Community College Library. Applied Educational Research and Evaluation.

ERIC Educational Resources Information Center

Sim, Yong Sup

After reviewing the current movement toward job enrichment, a system was designed for the technical services department of the Mercer County Community College Library. The Library Work Order Processing System, as tried between January and March, 1974, was designed to permit each worker more variety of jobs. The technical services department was…

Personnel occupied woven envelope robot power

NASA Technical Reports Server (NTRS)

1987-01-01

The Human Occupied Space Teleoperator (HOST) system currently under development utilizes a flexible tunnel/Stewart table structure to provide crew access to a pressurized manned work station or POD on the space station without extravehicular activity (EVA). The HOST structure facilitates moving a work station to multiple space station locations. The system has applications to orbiter docking, space station assembly, satellite servicing, space station maintenance, and logistics support. The conceptual systems design behind HOST is described in detail.

Development of Participative Management System in Learning Environment Management for Small Sized Primary Schools

ERIC Educational Resources Information Center

Hernthaisong, Prasertsak; Sirisuthi, Chaiyuth; Wisetrinthong, Kanjana

2017-01-01

The research aimed to: 1) study the factors of a participative management system in learning environment management, 2) study the current situation, desirable outcomes, and further needs for developing a participative management system in learning management, 3) develop a working participative management system, and 4) assess the system's…

Experimental Investigations on Microshock Waves and Contact Surfaces

NASA Astrophysics Data System (ADS)

Kai, Yun; Garen, Walter; Teubner, Ulrich

2018-02-01

The present work reports on progress in the research of a microshock wave. Because of the lack of a good understanding of the propagation mechanism of the microshock flow system (shock wave, contact surface, and boundary layer), the current work concentrates on measuring microshock flows with special attention paid to the contact surface. A novel setup involving a glass capillary (with a 200 or 300 μ m hydraulic diameter D ) and a high-speed magnetic valve is applied to generate a shock wave with a maximum initial Mach number of 1.3. The current work applies a laser differential interferometer to perform noncontact measurements of the microshock flow's trajectory, velocity, and density. The current work presents microscale measurements of the shock-contact distance L that solves the problem of calculating the scaling factor Sc =Re ×D /(4 L ) (introduced by Brouillette), which is a parameter characterizing the scaling effects of shock waves. The results show that in contrast to macroscopic shock waves, shock waves at the microscale have a different propagation or attenuation mechanism (key issue of this Letter) which cannot be described by the conventional "leaky piston" model. The main attenuation mechanism of microshock flow may be the ever slower moving contact surface, which drives the shock wave. Different from other measurements using pressure transducers, the current setup for density measurements resolves the whole microshock flow system.

Low Current Surface Flashover for Initiation of Electric Propulsion Devices

NASA Astrophysics Data System (ADS)

Dary, Omar G.

There has been a recent increase in interest in miniaturization of propulsion systems for satellites. These systems are needed to propel micro- and nano-satellites, where platforms are much smaller than conventional satellites and require smaller levels of thrust. Micro-propulsion systems for these satellites are in their infancy and they must manage with smaller power systems and smaller propellant volumes. Electric propulsion systems operating on various types of electric discharges are typically used for these needs. One of the central components of such electrical micropropulsion systems are ignitor subsystems, which are required for creation the breakdown and initiation of the main discharge. Ignitors have to provide reliable ignition for entire lifetime of the micropropulsion system. Electric breakdown in vacuum usually require high voltage potentials of hundreds of kilovolts per mm to induce breakdown. The breakdown voltage can be significantly decreased (down to several kVs per mm) if dielectric surface flashover is utilized. However, classical dielectric surface flashover operates at large electric current (100s of Amperes) and associated with overheating and damage of the electrodes/dielectric assembly after several flashover events. The central idea of this work was to eliminate the damage to the flashover electrode assembly by limiting the flashover currents to low values in milliampere range (Low Current Surface Flashover -LCSF) and utilize LCSF system as an ignition source for the main discharge on the micropropulsion system. The main objective of this research was to create a robust LCSF ignition system, capable producing a large number of surface flashover triggering events without significant damage to the LCSF electrode assembly. The thesis aims to characterize the plasma plume created at LCSF, study electrodes ablation and identify conditions required for robust triggering of main discharge utilized on micro-propulsion system. Conditioning of a new LCSF assembly (flashover current was limited to <100 mA in all experiments) was measured and breakdown voltages in the range of 8kV to 12kV were observed for the fully conditioned assembly. No damage to the LCSF electrode assembly was observed after about 104 LCSF events. The LCSF assembly created sufficient amount of seed plasma in order to bridge a vacuum gap between the high-current electrodes and to reliably ignite high-current arcs (10A-12A arc were used in this work). Ignition of the high-current arc was observed at three different cases of LCSF with limiting currents 100 mA, 33 mA and 20 mA respectively. Plasma parameter measurements were conducted with variety of Langmuir probes inside the LCSF plume. Ion currents created by the LCSF were primarily expelled directly perpendicular from the insulator surface. The plasma expansion for the LCSF assembly was measured to be 2 x 106-6 x 106 cm/s. Plasma density was measured to range 10 10-1011 cm-3. The plasma density was maximal near the LCSF assembly and quickly reduced radially. Temporal decay of the plasma was observed on a time scale of about 5 micros after the LCSF event. The results of this work are significant for creation of ignitor for micropropulsion systems. LCSF system offers reliable triggering for numerous ignition pulses for entire lifetime of the micropropulsion system and reduces complexity and volume of the system by excluding moving parts and the need for an external gas tanks.

Smart monitoring system based on adaptive current control for superconducting cable test.

PubMed

Arpaia, Pasquale; Ballarino, Amalia; Daponte, Vincenzo; Montenero, Giuseppe; Svelto, Cesare

2014-12-01

A smart monitoring system for superconducting cable test is proposed with an adaptive current control of a superconducting transformer secondary. The design, based on Fuzzy Gain Scheduling, allows the controller parameters to adapt continuously, and finely, to the working variations arising from transformer nonlinear dynamics. The control system is integrated in a fully digital control loop, with all the related benefits, i.e., high noise rejection, ease of implementation/modification, and so on. In particular, an accurate model of the system, controlled by a Fuzzy Gain Scheduler of the superconducting transformer, was achieved by an experimental campaign through the working domain at several current ramp rates. The model performance was characterized by simulation, under all the main operating conditions, in order to guide the controller design. Finally, the proposed monitoring system was experimentally validated at European Organization for Nuclear Research (CERN) in comparison to the state-of-the-art control system [P. Arpaia, L. Bottura, G. Montenero, and S. Le Naour, "Performance improvement of a measurement station for superconducting cable test," Rev. Sci. Instrum. 83, 095111 (2012)] of the Facility for the Research on Superconducting Cables, achieving a significant performance improvement: a reduction in the system overshoot by 50%, with a related attenuation of the corresponding dynamic residual error (both absolute and RMS) up to 52%.

Implementing the work disability prevention paradigm among therapists in Hong Kong: facilitators and barriers.

PubMed

Szeto, Grace P Y; Cheng, Andy S K; Lee, Edwin W C; Schonstein, Eva; Gross, Douglas P

2011-03-01

This is a discussion paper to examine the issues surrounding management of work-related injuries by physiotherapists and occupational therapists in Hong Kong. Therapists working in public hospitals are faced with managing injured workers with limited resources and this frequently results in suboptimal outcomes. In this paper, five experienced therapists critically reviewed the current practices in the physiotherapy and occupational therapy professions in Hong Kong, with regard to managing patients with work injuries. In many hospitals, therapists still practice with a disease-based model focusing on symptom relief and restoration of general physical function. We collated information about current programs initiated by physiotherapists and occupational therapists to provide more strategic intervention strategies for early screening of high-risk patients and adaptive biopsychosocial interventions targeting return-to-work outcomes. Clinical and system-level barriers and facilitators of a major paradigm shift towards work disability prevention are discussed. Physiotherapists and occupational therapists need to develop more strategic collaborations and actively voice out the need for major systematic changes within the local healthcare system, in order to provide a more effective management approach in line with the concept of Work Disability Prevention.

Foundations for a syntatic pattern recognition system for genomic DNA sequences. [Annual] report, 1 December 1991--31 March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Searles, D.B.

1993-03-01

The goal of the proposed work is the creation of a software system that will perform sophisticated pattern recognition and related functions at a level of abstraction and with expressive power beyond current general-purpose pattern-matching systems for biological sequences; and with a more uniform language, environment, and graphical user interface, and with greater flexibility, extensibility, embeddability, and ability to incorporate other algorithms, than current special-purpose analytic software.

Work zone variable speed limit systems: Effectiveness and system design issues.

DOT National Transportation Integrated Search

2010-03-01

Variable speed limit (VSL) systems have been used in a number of countries, particularly in Europe, as a method to improve flow and increase safety. VSLs use detectors to collect data on current traffic and/or weather conditions. Posted speed limits ...

Work zone variable speed limit systems : effectiveness and system design issues.

DOT National Transportation Integrated Search

2010-03-01

Variable speed limit (VSL) systems have been used in a number of countries, particularly in Europe, as a method to improve flow and increase safety. VSLs use detectors to collect data on current traffic and/or weather conditions. Posted speed limits ...

Development of a prototype spatial information processing system for hydrologic research

NASA Technical Reports Server (NTRS)

Sircar, Jayanta K.

1991-01-01

Significant advances have been made in the last decade in the areas of Geographic Information Systems (GIS) and spatial analysis technology, both in hardware and software. Science user requirements are so problem specific that currently no single system can satisfy all of the needs. The work presented here forms part of a conceptual framework for an all-encompassing science-user workstation system. While definition and development of the system as a whole will take several years, it is intended that small scale projects such as the current work will address some of the more short term needs. Such projects can provide a quick mechanism to integrate tools into the workstation environment forming a larger, more complete hydrologic analysis platform. Described here are two components that are very important to the practical use of remote sensing and digital map data in hydrology. Described here is a graph-theoretic technique to rasterize elevation contour maps. Also described is a system to manipulate synthetic aperture radar (SAR) data files and extract soil moisture data.

Work-Related Injury Surveillance in Vietnam: A National Reporting System Model

PubMed Central

Marucci-Wellman, Helen; Wegman, David H.; Leamon, Tom B.; Tuyet Binh, Ta Thi; Diep, Nguyen Bich; Kriebel, David

2013-01-01

Developing nations bear a substantial portion of the global burden of injury. Public health surveillance models in developing countries should recognize injury risks for all levels of society and all causes and should incorporate various groups of workers and industries, including subsistence agriculture. However, many developing nations do not have an injury registration system; current data collection methods result in gross national undercounts of injuries, failing to distinguish injuries that occur during work. In 2006, we established an active surveillance system in Vietnam’s Xuan Tien commune and investigated potential methods for surveillance of work-related injuries. On the basis of our findings, we recommend a national model for work-related injury surveillance in Vietnam that builds on the existing health surveillance system. PMID:24028255

Working Together for a Competitive Workforce. A Handbook for State Policy Teams. Investing in People Project.

ERIC Educational Resources Information Center

Zinser, Jana

This handbook describes the methodology of the Investing in People Project, conducted in Connecticut, Iowa, Kentucky, Washington, and West Virginia to help states in assessing their current work force and economic development systems and in building more comprehensive, integrated, and effective strategies for improving the work force. The handbook…

Method for Estimating Patronage of Demand Responsive Transportation Systems

DOT National Transportation Integrated Search

1977-12-01

This study has developed a method for estimating patronage of demand responsive transportation (DRT) systems. This procedure requires as inputs a description of the intended service area, current work trip patterns, characteristics of the served popu...

Summary of Current and Future MSFC International Space Station Environmental Control and Life Support System Activities

NASA Technical Reports Server (NTRS)

Ray, Charles D.; Carrasquillo, Robyn L.; Minton-Summers, Silvia

1997-01-01

This paper provides a summary of current work accomplished under technical task agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the Environmental Control and Life Support System (ECLSS) as well as future planning activities in support of the International Space Station (ISS). Current activities include ECLSS computer model development, component design and development, subsystem integrated system testing, life testing, and government furnished equipment delivered to the ISS program. A long range plan for the MSFC ECLSS test facility is described whereby the current facility would be upgraded to support integrated station ECLSS operations. ECLSS technology development efforts proposed to be performed under the Advanced Engineering Technology Development (AETD) program are also discussed.

Working at the microscope: analysis of the activities involved in diagnostic pathology.

PubMed

Randell, Rebecca; Ruddle, Roy A; Quirke, Phil; Thomas, Rhys G; Treanor, Darren

2012-02-01

To study the current work practice of histopathologists to inform the design of digital microscopy systems. Four gastrointestinal histopathologists were video-recorded as they undertook their routine work. Analysis of the video data shows a range of activities beyond viewing slides involved in reporting a case. There is much overlapping of activities, supported by the 'eyes free' nature of the pathologists' interaction with the microscope. The order and timing of activities varies according to consultant. In order to support the work of pathologists adequately, digital microscopy systems need to provide support for a range of activities beyond viewing slides. Digital microscopy systems should support multitasking, while also providing flexibility so that pathologists can adapt their use of the technology to their own working patterns. © 2011 Blackwell Publishing Ltd.

Design Support System for Open Distance Learning Student Teamwork

NASA Astrophysics Data System (ADS)

Putranto, A.; Pradipto, Y. D.

2017-01-01

Open distance learning students in doing team assignment, they seldom face to some problems such as student fell unfair in numbers of workload contribution, instructors also do not know which students do more work than others. So there are some questions ie: how to connect between instructor, team members, and working documents. Methods will be used are first, analyzing current condition and last by designing systems to connect between instructor, team members, and document. The expected result is support systems for open distance learning student teamwork.

An accurate online calibration system based on combined clamp-shape coil for high voltage electronic current transformers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Zhen-hua; Li, Hong-bin; Zhang, Zhi

Electronic transformers are widely used in power systems because of their wide bandwidth and good transient performance. However, as an emerging technology, the failure rate of electronic transformers is higher than that of traditional transformers. As a result, the calibration period needs to be shortened. Traditional calibration methods require the power of transmission line be cut off, which results in complicated operation and power off loss. This paper proposes an online calibration system which can calibrate electronic current transformers without power off. In this work, the high accuracy standard current transformer and online operation method are the key techniques. Basedmore » on the clamp-shape iron-core coil and clamp-shape air-core coil, a combined clamp-shape coil is designed as the standard current transformer. By analyzing the output characteristics of the two coils, the combined clamp-shape coil can achieve verification of the accuracy. So the accuracy of the online calibration system can be guaranteed. Moreover, by employing the earth potential working method and using two insulating rods to connect the combined clamp-shape coil to the high voltage bus, the operation becomes simple and safe. Tests in China National Center for High Voltage Measurement and field experiments show that the proposed system has a high accuracy of up to 0.05 class.« less

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Application of the resource-based relative value scale system to pediatrics.

PubMed

Gerstle, Robert S; Molteni, Richard A; Andreae, Margie C; Bradley, Joel F; Brewer, Eileen D; Calabrese, Jamie; Krug, Steven E; Liechty, Edward A; Linzer, Jeffrey F; Pillsbury, Julia M; Tuli, Sanjeev Y

2014-06-01

The majority of public and private payers in the United States currently use the Medicare Resource-Based Relative Value Scale as the basis for physician payment. Many large group and academic practices have adopted this objective system of physician work to benchmark physician productivity, including using it, wholly or in part, to determine compensation. The Resource-Based Relative Value Scale survey instrument, used to value physician services, was designed primarily for procedural services, leading to current concerns that American Medical Association/Specialty Society Relative Value Scale Update Committee (RUC) surveys may undervalue nonprocedural evaluation and management services. The American Academy of Pediatrics is represented on the RUC, the committee charged with maintaining accurate physician work values across specialties and age groups. The Academy, working closely with other primary care and subspecialty societies, actively pursues a balanced RUC membership and a survey instrument that will ensure appropriate work relative value unit assignments, thereby allowing pediatricians to receive appropriate payment for their services relative to other services.

University of Washington/ Northwest National Marine Renewable Energy Center Tidal Current Technology Test Protocol, Instrumentation, Design Code, and Oceanographic Modeling Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-11-452

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, Frederick R.

The University of Washington (UW) - Northwest National Marine Renewable Energy Center (UW-NNMREC) and the National Renewable Energy Laboratory (NREL) will collaborate to advance research and development (R&D) of Marine Hydrokinetic (MHK) renewable energy technology, specifically renewable energy captured from ocean tidal currents. UW-NNMREC is endeavoring to establish infrastructure, capabilities and tools to support in-water testing of marine energy technology. NREL is leveraging its experience and capabilities in field testing of wind systems to develop protocols and instrumentation to advance field testing of MHK systems. Under this work, UW-NNMREC and NREL will work together to develop a common instrumentation systemmore » and testing methodologies, standards and protocols. UW-NNMREC is also establishing simulation capabilities for MHK turbine and turbine arrays. NREL has extensive experience in wind turbine array modeling and is developing several computer based numerical simulation capabilities for MHK systems. Under this CRADA, UW-NNMREC and NREL will work together to augment single device and array modeling codes. As part of this effort UW NNMREC will also work with NREL to run simulations on NREL's high performance computer system.« less

Research on Harmonic Characteristic of Electronic Current Transformer Based on the Rogowski Coil

NASA Astrophysics Data System (ADS)

Shen, Diqiu; Hu, Bei; Wang, Xufeng; Zhu, Mingdong; Wang, Liang; Lu, Wenxing

2017-05-01

The nonlinear load present in the power system will cause the distortion of AC sine wave and generate the harmonic, which havea severe impact on the accuracy of energy metering and reliability of relay protection. Tosatisfy the requirements of energy metering and relay protection for the new generation of intelligent substation, based on the working principle of Rogowski coil current transformer, mathematical model and transfer characteristics of Rogowski coil sensors were studied in this paper, and frequency response characteristics of Rogowski coil current transformer system were analysed. Finally, the frequency response characteristics of the Rogowski coil current transformer at 2 to 13 harmonics was simulated and experimented. Simulation and experiments show that Rogowski coil current transformer couldmeet 0.2 accuracy requirements of harmonic power measurement of power system, and measure the harmonic components of the grid reliably.

R and E: Communications and Intelligent Systems Division (LC)

NASA Technical Reports Server (NTRS)

Emerson, Dawn C.; Miranda, Felix A.

2015-01-01

This presentation is intended for the Ohio Federal Research Network's Centers of Excellence. The presentation provides an overview of the Communications and Intelligent Systems Division including current research and engineering work as well as future technology needs.

An innovative exercise method to simulate orbital EVA work - Applications to PLSS automatic controls

NASA Technical Reports Server (NTRS)

Lantz, Renee; Vykukal, H.; Webbon, Bruce

1987-01-01

An exercise method has been proposed which may satisfy the current need for a laboratory simulation representative of muscular, cardiovascular, respiratory, and thermoregulatory responses to work during orbital extravehicular activity (EVA). The simulation incorporates arm crank ergometry with a unique body support mechanism that allows all body position stabilization forces to be reacted at the feet. By instituting this exercise method in laboratory experimentation, an advanced portable life support system (PLSS) thermoregulatory control system can be designed to more accurately reflect the specific work requirements of orbital EVA.

Adaptive Interface Approach Using a Real Time Biocybernetic System: Control of Hazardous Awareness

NASA Technical Reports Server (NTRS)

Ray, William J.

2002-01-01

The focus of this current grant was to continue our work which focused on the manner in which psychophysiological markers can be used to index hazardous states of awareness and to explore the feasibility of developing on-line systems that utilize real time feedback to modify on-going behavioral processes. In this work we have incorporated a multifaceted approach which includes psychophysiological, subjective, and performance based measures. We have considered this from both an internal and external perspective as reflected in work from a variety of labs.

Does an activity based remuneration system attract young doctors to general practice?

PubMed Central

2012-01-01

Background The use of increasingly complex payment schemes in primary care may represent a barrier to recruiting general practitioners (GP). The existing Norwegian remuneration system is fully activity based - 2/3 fee-for-service and 1/3 capitation. Given that the system has been designed and revised in close collaborations with the medical association, it is likely to correspond - at least to some degree - with the preferences of current GPs (men in majority). The objective of this paper was to study which preferences that young doctors (women in majority), who are the potential entrants to general practice have for activity based vs. salary based payment systems. Methods In November-December 2010 all last year medical students and all interns in Norway (n = 1.562) were invited to participate in an online survey. The respondents were asked their opinion on systems of remuneration for GPs; inclination to work as a GP; risk attitude; income preferences; work pace tolerance. The data was analysed using one-way ANOVA and multinomial logistic regression analysis. Results A total of 831 (53%) responded. Nearly half the sample (47%) did not consider the remuneration system to be important for their inclination to work as GP; 36% considered the current system to make general practice more attractive, while 17% considered it to make general practice less attractive. Those who are attracted by the existing system were men and those who think high income is important, while those who are deterred by the system are risk averse and less happy with a high work pace. On the question of preferred remuneration system, half the sample preferred a mix of salary and activity based remuneration (the median respondent would prefer a 50/50 mix). Only 20% preferred a fully activity based system like the existing one. A salary system was preferred by women, and those less concerned with high income, while a fully activity based system was preferred by men, and those happy with a high work pace. Conclusions Given a concern about low recruitment to general practice in Norway, and the fact that an increasing share of medical students is women, we were interested in the extent to which the current Norwegian remuneration system correspond with the preferences of potential GPs. This study suggests that an existing remuneration mechanism has a selection effect on who would like to become a GP. Those most attracted are income motivated men. Those deterred are risk averse, and less happy with a high work pace. More research is needed on the extent to which experienced GPs differ along the questions we asked potential GPs, as well as studying the relative importance of other attributes than payment schemes. PMID:22433750

Planar LTCC transformers for high voltage flyback converters: Part II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schofield, Daryl; Schare, Joshua M., Ph.D.; Slama, George

This paper is a continuation of the work presented in SAND2007-2591 'Planar LTCC Transformers for High Voltage Flyback Converters'. The designs in that SAND report were all based on a ferrite tape/dielectric paste system originally developed by NASCENTechnoloy, Inc, who collaborated in the design and manufacturing of the planar LTCC flyback converters. The output/volume requirements were targeted to DoD application for hard target/mini fuzing at around 1500 V for reasonable primary peak currents. High voltages could be obtained but with considerable higher current. Work had begun on higher voltage systems and is where this report begins. Limits in material propertiesmore » and processing capabilities show that the state-of-the-art has limited our practical output voltage from such a small part volume. In other words, the technology is currently limited within the allowable funding and interest.« less

Development of design principles for automated systems in transport control.

PubMed

Balfe, Nora; Wilson, John R; Sharples, Sarah; Clarke, Theresa

2012-01-01

This article reports the results of a qualitative study investigating attitudes towards and opinions of an advanced automation system currently used in UK rail signalling. In-depth interviews were held with 10 users, key issues associated with automation were identified and the automation's impact on the signalling task investigated. The interview data highlighted the importance of the signallers' understanding of the automation and their (in)ability to predict its outputs. The interviews also covered the methods used by signallers to interact with and control the automation, and the perceived effects on their workload. The results indicate that despite a generally low level of understanding and ability to predict the actions of the automation system, signallers have developed largely successful coping mechanisms that enable them to use the technology effectively. These findings, along with parallel work identifying desirable attributes of automation from the literature in the area, were used to develop 12 principles of automation which can be used to help design new systems which better facilitate cooperative working. The work reported in this article was completed with the active involvement of operational rail staff who regularly use automated systems in rail signalling. The outcomes are currently being used to inform decisions on the extent and type of automation and user interfaces in future generations of rail control systems.

Applying mobile and pervasive computer technology to enhance coordination of work in a surgical ward.

PubMed

Hansen, Thomas Riisgaard; Bardram, Jakob E

2007-01-01

Collaboration, coordination, and communication are crucial in maintaining an efficient and smooth flow of work in an operating ward. This coordination, however, often comes at a high price in terms of unsuccessfully trying to get hold of people, disturbing telephone calls, looking for people, and unnecessary stress. To accommodate this situation and to increase the quality of work in operating wards, we have designed a set of pervasive computer systems which supports what we call context-mediated communication and awareness. These systems use large interactive displays, video streaming from key locations, tracking systems, and mobile devices to support social awareness and different types of communication modalities relevant to the current context. In this paper we report qualitative data from a one-year deployment of the system in a local hospital. Overall, this study shows that 75% of the participants strongly agreed that these systems had made their work easier.

[Development of performance evaluation and management system on advanced schistosomiasis medical treatment].

PubMed

Zhou, Xiao-Rong; Huang, Shui-Sheng; Gong, Xin-Guo; Cen, Li-Ping; Zhang, Cong; Zhu, Hong; Yang, Jun-Jing; Chen, Li

2012-04-01

To construct a performance evaluation and management system on advanced schistosomiasis medical treatment, and analyze and evaluate the work of the advanced schistosomiasis medical treatment over the years. By applying the database management technique and C++ programming technique, we inputted the information of the advanced schistosomiasis cases into the system, and comprehensively evaluated the work of the advanced schistosomiasis medical treatment through the cost-effect analysis, cost-effectiveness analysis, and cost-benefit analysis. We made a set of software formula about cost-effect analysis, cost-effectiveness analysis, and cost-benefit analysis. This system had many features such as clear building, easy to operate, friendly surface, convenient information input and information search. It could benefit the performance evaluation of the province's advanced schistosomiasis medical treatment work. This system can satisfy the current needs of advanced schistosomiasis medical treatment work and can be easy to be widely used.

Working with Chronically Dysfunctional Families.

ERIC Educational Resources Information Center

Younger, Robert; And Others

This paper reviews family therapy with chronically dysfunctional families including the development of family therapy and current trends which appear to give little guidance toward working with severely dysfunctional families. A theoretical stance based upon the systems approach to family functioning and pathology is presented which suggests: (1)…

Management Tools for Bus Maintenance: Current Practices and New Methods. Final Report.

ERIC Educational Resources Information Center

Foerster, James; And Others

Management of bus fleet maintenance requires systematic recordkeeping, management reporting, and work scheduling procedures. Tools for controlling and monitoring routine maintenance activities are in common use. These include defect and fluid consumption reports, work order systems, historical maintenance records, and performance and cost…

My Place or Yours: Theorizing Eclectic Writing Centers.

ERIC Educational Resources Information Center

Rossini, Carol

None of the theories that inform writing center work--Freudian theory, cognitivism, feminism, postmodernism, current-traditionalism, expressivism, social constructionism, and family systems theory--offer an adequate basis for writing center work. Even when Stephen North proposed "The Idea of a Writing Center" in 1984 (still considered to…

Internal friction between fluid particles of MHD tangent hyperbolic fluid with heat generation: Using coefficients improved by Cash and Karp

NASA Astrophysics Data System (ADS)

Salahuddin, T.; Khan, Imad; Malik, M. Y.; Khan, Mair; Hussain, Arif; Awais, Muhammad

2017-05-01

The present work examines the internal resistance between fluid particles of tangent hyperbolic fluid flow due to a non-linear stretching sheet with heat generation. Using similarity transformations, the governing system of partial differential equations is transformed into a coupled non-linear ordinary differential system with variable coefficients. Unlike the current analytical works on the flow problems in the literature, the main concern here is to numerically work out and find the solution by using Runge-Kutta-Fehlberg coefficients improved by Cash and Karp (Naseer et al., Alexandria Eng. J. 53, 747 (2014)). To determine the relevant physical features of numerous mechanisms acting on the deliberated problem, it is sufficient to have the velocity profile and temperature field and also the drag force and heat transfer rate all as given in the current paper.

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 4: Economic feasibility

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

The results of the economic analysis of the AIDS 3 system design are presented. AIDS 3 evaluated a set of economic feasibility measures including life cycle cost, implementation cost, annual operating expenditures and annual capital expenditures. The economic feasibility of AIDS 3 was determined by comparing the evaluated measures with the same measures, where applicable, evaluated for the current system. A set of future work load scenarios was constructed using JPL's environmental evaluation study of the fingerprint identification system. AIDS 3 and the current system were evaluated for each of the economic feasibility measures for each of the work load scenarios. They were compared for a set of performance measures, including response time and accuracy, and for a set of cost/benefit ratios, including cost per transaction and cost per technical search. Benefit measures related to the economic feasibility of the system are also presented, including the required number of employees and the required employee skill mix.

System for Anomaly and Failure Detection (SAFD) system development

NASA Technical Reports Server (NTRS)

Oreilly, D.

1992-01-01

This task specified developing the hardware and software necessary to implement the System for Anomaly and Failure Detection (SAFD) algorithm, developed under Technology Test Bed (TTB) Task 21, on the TTB engine stand. This effort involved building two units; one unit to be installed in the Block II Space Shuttle Main Engine (SSME) Hardware Simulation Lab (HSL) at Marshall Space Flight Center (MSFC), and one unit to be installed at the TTB engine stand. Rocketdyne personnel from the HSL performed the task. The SAFD algorithm was developed as an improvement over the current redline system used in the Space Shuttle Main Engine Controller (SSMEC). Simulation tests and execution against previous hot fire tests demonstrated that the SAFD algorithm can detect engine failure as much as tens of seconds before the redline system recognized the failure. Although the current algorithm only operates during steady state conditions (engine not throttling), work is underway to expand the algorithm to work during transient condition.

Design of a temperature control system using incremental PID algorithm for a special homemade shortwave infrared spatial remote sensor based on FPGA

NASA Astrophysics Data System (ADS)

Xu, Zhipeng; Wei, Jun; Li, Jianwei; Zhou, Qianting

2010-11-01

An image spectrometer of a spatial remote sensing satellite requires shortwave band range from 2.1μm to 3μm which is one of the most important bands in remote sensing. We designed an infrared sub-system of the image spectrometer using a homemade 640x1 InGaAs shortwave infrared sensor working on FPA system which requires high uniformity and low level of dark current. The working temperature should be -15+/-0.2 Degree Celsius. This paper studies the model of noise for focal plane array (FPA) system, investigated the relationship with temperature and dark current noise, and adopts Incremental PID algorithm to generate PWM wave in order to control the temperature of the sensor. There are four modules compose of the FPGA module design. All of the modules are coded by VHDL and implemented in FPGA device APA300. Experiment shows the intelligent temperature control system succeeds in controlling the temperature of the sensor.

An Informatics Approach to Establishing a Sustainable Public Health Community

ERIC Educational Resources Information Center

Kriseman, Jeffrey Michael

2012-01-01

This work involved the analysis of a public health system, and the design, development and deployment of enterprise informatics architecture, and sustainable community methods to address problems with the current public health system. Specifically, assessment of the Nationally Notifiable Disease Surveillance System (NNDSS) was instrumental in…

Systems Analysis of Alternative Architectures for Riverine Warfare in 2010

DTIC Science & Technology

2006-12-01

propose system of systems improvements for the RF in 2010. With the RF currently working to establish a command structure, train and equip its forces...opposing force. Measures of performance such as time to first enemy detection and loss exchange ratio were collected from MANA. A detailed statistical

75 FR 38533 - Medicare Program; Second Semi-Annual Meeting of the Advisory Panel on Ambulatory Payment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-02

... participate fully in the Panel's work. Such expertise encompasses hospital payment systems; hospital medical care delivery systems; provider billing systems; APC groups; Current Procedural Terminology codes; and..., medical devices, and other services in the outpatient setting, as well as other forms of relevant...

Critical Approach to the Contribution Made by Education Research to the Social Construction of the Value of Teaching Work

ERIC Educational Resources Information Center

Marcel, Jean-Francois

2013-01-01

Current changes affecting education systems have impacted teaching work as a whole. The concept of teachers' and establishments' effectiveness was introduced to operationalise an approach that is dominated by the cost-benefit model. This article uses this premise to suggest an analysis of the social value of teaching work, and more specifically…

Improving Scientific Inquiry for Social Work in South Korea: The Center for Social Welfare Research at Yonsei University

ERIC Educational Resources Information Center

Choi, Jae-Sung; Choi, Soochan; Kim, Yujin

2009-01-01

This article examines current social issues and welfare needs in South Korea and discusses societal efforts to respond to these needs through social welfare systems nationwide. It also reviews how social work scholars, major contributors to the creation of a Korean welfare state, have contributed to the conditions of social work practice by…

Biological basis for space-variant sensor design I: parameters of monkey and human spatial vision

NASA Astrophysics Data System (ADS)

Rojer, Alan S.; Schwartz, Eric L.

1991-02-01

Biological sensor design has long provided inspiration for sensor design in machine vision. However relatively little attention has been paid to the actual design parameters provided by biological systems as opposed to the general nature of biological vision architectures. In the present paper we will provide a review of current knowledge of primate spatial vision design parameters and will present recent experimental and modeling work from our lab which demonstrates that a numerical conformal mapping which is a refinement of our previous complex logarithmic model provides the best current summary of this feature of the primate visual system. In this paper we will review recent work from our laboratory which has characterized some of the spatial architectures of the primate visual system. In particular we will review experimental and modeling studies which indicate that: . The global spatial architecture of primate visual cortex is well summarized by a numerical conformal mapping whose simplest analytic approximation is the complex logarithm function . The columnar sub-structure of primate visual cortex can be well summarized by a model based on a band-pass filtered white noise. We will also refer to ongoing work in our lab which demonstrates that: . The joint columnar/map structure of primate visual cortex can be modeled and summarized in terms of a new algorithm the ''''proto-column'''' algorithm. This work provides a reference-point for current engineering approaches to novel architectures for

Future Performance Trend Indicators: A Current Value Approach to Human Resources Accounting. Report I. Internal Consistencies and Relationships to Performance By Site. Final Report.

ERIC Educational Resources Information Center

Pecorella, Patricia A.; Bowers, David G.

Analyses preparatory to construction of a suitable file for generating a system of future performance trend indicators are described. Such a system falls into the category of a current value approach to human resources accounting. It requires that there be a substantial body of data which: (1) uses the work group or unit, not the individual, as…

Teaching Assessment for Teacher Human Capital Management: Learning from the Current State of the Art. WCER Working Paper No. 2011-2

ERIC Educational Resources Information Center

Milanowski, Anthony T.; Heneman, Herbert G., III; Kimball, Steven M.

2011-01-01

This paper reports on a study of the current state of the art in teaching assessment. The major goal of the study was to examine a sample of assessment systems and then develop a specification for a state-of the art performance assessment system to be used for human capital management functions. The authors hope was that this specification would…

Medical social work practice in child protection in China: A multiple case study in Shanghai hospitals.

PubMed

Zhao, Fang; Hämäläinen, Juha; Chen, Yu-Ting

2017-01-01

With the rapid development of the child welfare system in China over recent years, medical social work has been increasingly involved in providing child protection services in several hospitals in Shanghai. Focusing on five cases in this paper, the exploratory study aims to present a critical overview of current practices and effects of medical social work for child protection, based on a critical analysis of the multidimensional role of social work practitioners engaged in the provision of child protection services as well as potential challenges. Implications and suggestions for future improvements of China's child protection system are also discussed.

Implementing Computer-Based Procedures: Thinking Outside the Paper Margins

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna; Bly, Aaron

In the past year there has been increased interest from the nuclear industry in adopting the use of electronic work packages and computer-based procedures (CBPs) in the field. The goal is to incorporate the use of technology in order to meet the Nuclear Promise requirements of reducing costs and improve efficiency and decrease human error rates of plant operations. Researchers, together with the nuclear industry, have been investigating the benefits an electronic work package system and specifically CBPs would have over current paper-based procedure practices. There are several classifications of CBPs ranging from a straight copy of the paper-based proceduremore » in PDF format to a more intelligent dynamic CBP. A CBP system offers a vast variety of improvements, such as context driven job aids, integrated human performance tools (e.g., placekeeping and correct component verification), and dynamic step presentation. The latter means that the CBP system could only display relevant steps based on operating mode, plant status, and the task at hand. The improvements can lead to reduction of the worker’s workload and human error by allowing the work to focus on the task at hand more. A team of human factors researchers at the Idaho National Laboratory studied and developed design concepts for CBPs for field workers between 2012 and 2016. The focus of the research was to present information in a procedure in a manner that leveraged the dynamic and computational capabilities of a handheld device allowing the worker to focus more on the task at hand than on the administrative processes currently applied when conducting work in the plant. As a part of the research the team identified type of work, instructions, and scenarios where the transition to a dynamic CBP system might not be as beneficial as it would for other types of work in the plant. In most cases the decision to use a dynamic CBP system and utilize the dynamic capabilities gained will be beneficial to the worker. However, tasks that are reliant on the skill of the craft or have a short set of instructions may not provide a way or even need to utilize all the advanced capabilities in a dynamic CBP system. Therefore, a hybrid CBP system that could handle all the classifications of a CBP would be the best solution to take advantage of all that a CBP system offers. The implementation of a CBP system does not automatically improve the quality of procedures. Utilities should look into why each procedure is written the way it currently is on paper. Utilities should take the time before implementation to review, standardize format and update current procedures. Implementation of a CBP system can be a time to break out of traditional procedure writing processes and create new processes and procedures that take advantage of the capabilities a CBP system. This paper will summarize the research on CBPs and provide suggestions to take into consideration when implementing a CBP system.« less

Protecting an endangered species: the contribution and constraints of nurses working in a specialist role.

PubMed

McCorkell, Gillian; Brown, Geraldine; Michaelides, Bernie; Coates, Vivien

2015-03-01

The project aims to assess current specialist practice in relation to the new and ever-changing healthcare climate and explore some of the issues that specialist nurses encounter. The current financial recession is driving a range of economic policy changes and consequently service provision, in particular the work and impact of nurses working in a specialist role, being examined. This has resulted in many specialist nurses feeling very vulnerable. A cross sectional survey was completed by nurses working in specialist roles (n = 96) in a large health and social care setting in the United Kingdom. A response rate of 62% was achieved: 44% provide nurse led clinics and 42% are nurse prescribers. The mean length of time qualified as a registered nurse was 27 years. Less than a third felt that the current computer system for activity recording reflected their current workload and 65% needed administrative support. This study demonstrates the insufficient resources available to specialist nurses resulting in inappropriate but necessary, use of time and restricted opportunities for learning and development. © 2013 John Wiley & Sons Ltd.

Spaceport Command and Control System Software Development

NASA Technical Reports Server (NTRS)

Glasser, Abraham

2017-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administration's (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires a large amount of intensive testing that will properly measure the capabilities of the system. Automating the test procedures would save the project money from human labor costs, as well as making the testing process more efficient. Therefore, the Exploration Systems Division (formerly the Electrical Engineering Division) at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Design and start-up of Gary Works' pulverized coal injection facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Donnell, E.M.; Cloran, L.M.; Oshnock, T.W.

1993-07-01

A pulverized coal injection system began operation at the Gary works' blast furnaces on Feb. 1, 1993. This system is capable of processing more than 3500 tons of coal/day to eventually supply the furnaces at a 400 lb/NTHM rate. The start-up was aggressive with coal levels exceeding 200 lb/NTHM within two to five weeks on the furnaces. Current rates are in the 250 to 290 lb/NTHM range.

Automated platform for designing multiple robot work cells

NASA Astrophysics Data System (ADS)

Osman, N. S.; Rahman, M. A. A.; Rahman, A. A. Abdul; Kamsani, S. H.; Bali Mohamad, B. M.; Mohamad, E.; Zaini, Z. A.; Rahman, M. F. Ab; Mohamad Hatta, M. N. H.

2017-06-01

Designing the multiple robot work cells is very knowledge-intensive, intricate, and time-consuming process. This paper elaborates the development process of a computer-aided design program for generating the multiple robot work cells which offer a user-friendly interface. The primary purpose of this work is to provide a fast and easy platform for less cost and human involvement with minimum trial and errors adjustments. The automated platform is constructed based on the variant-shaped configuration concept with its mathematical model. A robot work cell layout, system components, and construction procedure of the automated platform are discussed in this paper where integration of these items will be able to automatically provide the optimum robot work cell design according to the information set by the user. This system is implemented on top of CATIA V5 software and utilises its Part Design, Assembly Design, and Macro tool. The current outcomes of this work provide a basis for future investigation in developing a flexible configuration system for the multiple robot work cells.

Interdisciplinary Interactions During R&D and Early Design of Large Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas

2014-01-01

Designing Large-Scale Complex Engineered Systems (LaCES) such as aircraft and submarines requires the input of thousands of engineers and scientists whose work is proximate in neither time nor space. Comprehensive knowledge of the system is dispersed among specialists whose expertise is in typically one system component or discipline. This study examined the interactive work practices among such specialists seeking to improve engineering practice through a rigorous and theoretical understanding of current practice. This research explored current interdisciplinary practices and perspectives during R&D and early LaCES design and identified why these practices and perspectives prevail and persist. The research design consisted of a three-fold, integrative approach that combined an open-ended survey, semi-structured interviews, and ethnography. Significant empirical data from experienced engineers and scientists in a large engineering organization were obtained and integrated with theories from organization science and engineering. Qualitative analysis was used to obtain a holistic, contextualized understanding. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. For example, organization culture is an important underlying factor that guided researchers more toward individual sovereignty over cross-disciplinarity. The organization structure and the engineered system architecture also serve as constraints to the engineering work. Many differences in work practices were observed, including frequency and depth of interactions, definition or co-construction of requirements, clarity or creation of the system architecture, work group proximity, and cognitive challenges. Practitioners are often unaware of these differences resulting in confusion and incorrect assumptions regarding work expectations. Cognitively, the enactment and coconstruction of knowledge are the fundamental tasks of the interdisciplinary interactions. Distributed and collective cognition represent most of the efforts. Argument, ignorance, learning, and creativity are interrelated aspects of the interactions that cause discomfort but yield benefits such as problem mitigation, broader understanding, and improved system design and performance. The quality and quantity of social interrelations are central to all work across disciplines with reciprocity, respectful engagement, and heedful interrelations being significant to the effectiveness of the engineering and scientific work.

A Model of an Educational Institution for Working with Gifted Children

ERIC Educational Resources Information Center

Karpova, S. I.

2012-01-01

The dynamics of social, economic, and public life provide evidence of the increasing need to analyze current problems of children's education and giftedness. At present, work with gifted children in the municipal system of education is being conducted by many educational institutions--gymnasiums, lyceums, and institutions for supplementary…

77 FR 20789 - Work Group on Measuring Systems for Taxis

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

.... SUMMARY: The National Institute of Standards and Technology (NIST) is forming a Work Group (WG) to develop proposals to revise the current Taximeters Code in NIST Handbook 44 (HB 44), Specifications, Tolerances, and... CONTACT: Mr. John Barton, NIST, Office of Weights and Measures, 100 Bureau Drive, Stop 2600, Gaithersburg...

Development of a Work Control System for Propulsion Testing at NASA Stennis

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2005-01-01

This paper will explain the requirements and steps taken to develop the current Propulsion Test Directorate electronic work control system for Test Operations. The PTD Work Control System includes work authorization and technical instruction documents, such as test preparation sheets, discrepancy reports, test requests, pre-test briefing reports, and other test operations supporting tools. The environment that existed in the E-Complex test areas in the late 1990's was one of enormous growth which brought people of diverse backgrounds together for the sole purpose of testing propulsion hardware. The problem that faced us was that these newly formed teams did not have a consistent and clearly understood method for writing, performing or verifying work. A paper system was developed that would allow the teams to use the same forms, but this still presented problems in the large amount of errors occurring, such as lost paperwork and inconsistent implementation. In a sampling of errors in August 1999, the paper work control system encountered 250 errors out of 230 documents released and completed, for an error rate of 111%.

A Semantic Web-based System for Managing Clinical Archetypes.

PubMed

Fernandez-Breis, Jesualdo Tomas; Menarguez-Tortosa, Marcos; Martinez-Costa, Catalina; Fernandez-Breis, Eneko; Herrero-Sempere, Jose; Moner, David; Sanchez, Jesus; Valencia-Garcia, Rafael; Robles, Montserrat

2008-01-01

Archetypes facilitate the sharing of clinical knowledge and therefore are a basic tool for achieving interoperability between healthcare information systems. In this paper, a Semantic Web System for Managing Archetypes is presented. This system allows for the semantic annotation of archetypes, as well for performing semantic searches. The current system is capable of working with both ISO13606 and OpenEHR archetypes.

Evaluation Framework Based on Fuzzy Measured Method in Adaptive Learning Systems

ERIC Educational Resources Information Center

Ounaies, Houda Zouari; Jamoussi, Yassine; Ben Ghezala, Henda Hajjami

2008-01-01

Currently, e-learning systems are mainly web-based applications and tackle a wide range of users all over the world. Fitting learners' needs is considered as a key issue to guaranty the success of these systems. Many researches work on providing adaptive systems. Nevertheless, evaluation of the adaptivity is still in an exploratory phase.…

Would Consolidation of Army Software Engineering Organizations Help to Control Software Costs for Current and Future Systems

DTIC Science & Technology

2015-04-16

Specific to Work and Organization .................................................................... 32 Summary of Questions Specific to Work and...Limitations include assumptions that the work identified in the software center’s 6 mission and functions manual (10-1; CECOM, 2011) as well as in public...that produced RDECOM. The focus was on the movement of positions based on the position job series, not on the work that was actually being performed

Anomalous current in diffusive ferromagnetic Josephson junctions

NASA Astrophysics Data System (ADS)

Silaev, M. A.; Tokatly, I. V.; Bergeret, F. S.

2017-05-01

We demonstrate that in diffusive superconductor/ferromagnet/superconductor (S/F/S) junctions a finite, anomalous Josephson current can flow even at zero phase difference between the S electrodes. The conditions for the observation of this effect are noncoplanar magnetization distribution and a broken magnetization inversion symmetry of the superconducting current. The latter symmetry is intrinsic for the widely used quasiclassical approximation and prevented previous works based on this approximation from obtaining the Josephson anomalous current. We show that this symmetry can be removed by introducing spin-dependent boundary conditions for the quasiclassical equations at the superconducting/ferromagnet interfaces in diffusive systems. Using this recipe, we consider generic multilayer magnetic systems and determine the ideal experimental conditions in order to maximize the anomalous current.

Landauer-Büttiker Approach to Strongly Coupled Quantum Thermodynamics: Inside-Outside Duality of Entropy Evolution

NASA Astrophysics Data System (ADS)

Bruch, Anton; Lewenkopf, Caio; von Oppen, Felix

2018-03-01

We develop a Landauer-Büttiker theory of entropy evolution in time-dependent, strongly coupled electron systems. The formalism naturally avoids the problem of the system-bath distinction by defining the entropy current in the attached leads. This current can then be used to infer changes of the entropy of the system which we refer to as the inside-outside duality. We carry out this program in an adiabatic expansion up to first order beyond the quasistatic limit. When combined with particle and energy currents, as well as the work required to change an external potential, our formalism provides a full thermodynamic description, applicable to arbitrary noninteracting electron systems in contact with reservoirs. This provides a clear understanding of the relation between heat and entropy currents generated by time-dependent potentials and their connection to the occurring dissipation.

Using neural networks and Dyna algorithm for integrated planning, reacting and learning in systems

NASA Technical Reports Server (NTRS)

Lima, Pedro; Beard, Randal

1992-01-01

The traditional AI answer to the decision making problem for a robot is planning. However, planning is usually CPU-time consuming, depending on the availability and accuracy of a world model. The Dyna system generally described in earlier work, uses trial and error to learn a world model which is simultaneously used to plan reactions resulting in optimal action sequences. It is an attempt to integrate planning, reactive, and learning systems. The architecture of Dyna is presented. The different blocks are described. There are three main components of the system. The first is the world model used by the robot for internal world representation. The input of the world model is the current state and the action taken in the current state. The output is the corresponding reward and resulting state. The second module in the system is the policy. The policy observes the current state and outputs the action to be executed by the robot. At the beginning of program execution, the policy is stochastic and through learning progressively becomes deterministic. The policy decides upon an action according to the output of an evaluation function, which is the third module of the system. The evaluation function takes the following as input: the current state of the system, the action taken in that state, the resulting state, and a reward generated by the world which is proportional to the current distance from the goal state. Originally, the work proposed was as follows: (1) to implement a simple 2-D world where a 'robot' is navigating around obstacles, to learn the path to a goal, by using lookup tables; (2) to substitute the world model and Q estimate function Q by neural networks; and (3) to apply the algorithm to a more complex world where the use of a neural network would be fully justified. In this paper, the system design and achieved results will be described. First we implement the world model with a neural network and leave Q implemented as a look up table. Next, we use a lookup table for the world model and implement the Q function with a neural net. Time limitations prevented the combination of these two approaches. The final section discusses the results and gives clues for future work.

Experimental investigation on the development characteristics of initial electrons in a gas pressurized closing switch under DC voltage

NASA Astrophysics Data System (ADS)

Rongxiao, ZHAI; Mengtong, QIU; Weixi, LUO; Peitian, CONG; Tao, HUANG; Jiahui, YIN; Tianyang, ZHANG

2018-04-01

As one of the most important elements in linear transformer driver (LTD) based systems, the gas pressurized closing switches are required to operate with a very low prefire probability during the DC-charging process to ensure reliable operation and stable output of the whole pulsed power system. The most direct and effective way to control the prefire probability is to select a suitable working coefficient. The study of the development characteristics of the initially generated electrons is useful for optimizing the working coefficient and improving the prefire characteristic of the switches. In this paper an ultraviolet pulsed laser is used to generate initial electrons inside the gap volume. A current measuring system is used to measure the time-dependent current generated by the growth of the initial electrons so as to study the development characteristics of the electrons under different working coefficients. Experimental results show that the development characteristics of the initial electrons are influenced obviously by the working coefficient. With the increase of the working coefficient, the development degree of the electrons increases consequently. At the same times, there is a threshold of working coefficient which produces the effect of ionization on electrons. The range of the threshold has a slow growth but remains close to 65% with the gas pressure increase. When the working coefficient increases further, γ processes are starting to be generated inside the gap volume. In addition, an optimal working coefficient beneficial for improving the prefire characteristic is indicated and further tested.

Operational Analysis in the Launch Environment

NASA Technical Reports Server (NTRS)

James, George; Kaouk, Mo; Cao, Tim; Fogt, Vince; Rocha, Rodney; Schultz, Ken; Tucker, Jon-Michael; Rayos, Eli; Bell,Jeff; Alldredge, David;

Eddy current testing for blade edge micro cracks of aircraft engine

NASA Astrophysics Data System (ADS)

Zhang, Wei-min; Xu, Min-dong; Gao, Xuan-yi; Jin, Xin; Qin, Feng

2017-10-01

Based on the problems of low detection efficiency in the micro cracks detection of aircraft engine blades, a differential excitation eddy current testing system was designed and developed. The function and the working principle of the system were described, the problems which contained the manufacture method of simulated cracks, signal generating, signal processing and the signal display method were described. The detection test was carried out by taking a certain model aircraft engine blade with simulated cracks as a tested specimen. The test data was processed by digital low-pass filter in the computer and the crack signals of time domain display and Lissajous figure display were acquired. By comparing the test results, it is verified that Lissajous figure display shows better performance compared to time domain display when the crack angle is small. The test results show that the eddy current testing system designed in this paper is feasible to detect the micro cracks on the aeroengine blade and can effectively improve the detection efficiency of micro cracks in the practical detection work.

Computational analysis of current-loss mechanisms in a post-hole convolute driven by magnetically insulated transmission lines

DOE PAGES

Rose, D.  V.; Madrid, E.  A.; Welch, D.  R.; ...

2015-03-04

Numerical simulations of a vacuum post-hole convolute driven by magnetically insulated vacuum transmission lines (MITLs) are used to study current losses due to charged particle emission from the MITL-convolute-system electrodes. This work builds on the results of a previous study [E.A. Madrid et al. Phys. Rev. ST Accel. Beams 16, 120401 (2013)] and adds realistic power pulses, Ohmic heating of anode surfaces, and a model for the formation and evolution of cathode plasmas. The simulations suggest that modestly larger anode-cathode gaps in the MITLs upstream of the convolute result in significantly less current loss. In addition, longer pulse durations leadmore » to somewhat greater current loss due to cathode-plasma expansion. These results can be applied to the design of future MITL-convolute systems for high-current pulsed-power systems.« less

In-vivo measurement of relationship between applied current amplitude and current density magnitude from 10 mA to 110 mA.

PubMed

DeMonte, Tim P; Wang, Dinghui; Ma, Weijing; Gao, Jia-Hong; Joy, Michael L G

2009-01-01

Current density imaging (CDI) is a magnetic resonance imaging (MRI) technique used to quantitatively measure current density vectors throughout the volume of an object/subject placed in the MRI system. Electrical current pulses are applied externally to the object/subject and are synchronized with the MRI sequence. In this work, CDI is used to measure average current density magnitude in the torso region of an in-vivo piglet for applied current pulse amplitudes ranging from 10 mA to 110 mA. The relationship between applied current amplitude and current density magnitude is linear in simple electronic elements such as wires and resistors; however, this relationship may not be linear in living tissue. An understanding of this relationship is useful for research in defibrillation, human electro-muscular incapacitation (e.g. TASER(R)) and other bioelectric stimulation devices. This work will show that the current amplitude to current density magnitude relationship is slightly nonlinear in living tissue in the range of 10 mA to 110 mA.

The development and evaluation of a hydrological seasonal forecast system prototype for predicting spring flood volumes in Swedish rivers

NASA Astrophysics Data System (ADS)

Foster, Kean; Bertacchi Uvo, Cintia; Olsson, Jonas

2018-05-01

Hydropower makes up nearly half of Sweden's electrical energy production. However, the distribution of the water resources is not aligned with demand, as most of the inflows to the reservoirs occur during the spring flood period. This means that carefully planned reservoir management is required to help redistribute water resources to ensure optimal production and accurate forecasts of the spring flood volume (SFV) is essential for this. The current operational SFV forecasts use a historical ensemble approach where the HBV model is forced with historical observations of precipitation and temperature. In this work we develop and test a multi-model prototype, building on previous work, and evaluate its ability to forecast the SFV in 84 sub-basins in northern Sweden. The hypothesis explored in this work is that a multi-model seasonal forecast system incorporating different modelling approaches is generally more skilful at forecasting the SFV in snow dominated regions than a forecast system that utilises only one approach. The testing is done using cross-validated hindcasts for the period 1981-2015 and the results are evaluated against both climatology and the current system to determine skill. Both the multi-model methods considered showed skill over the reference forecasts. The version that combined the historical modelling chain, dynamical modelling chain, and statistical modelling chain performed better than the other and was chosen for the prototype. The prototype was able to outperform the current operational system 57 % of the time on average and reduce the error in the SFV by ˜ 6 % across all sub-basins and forecast dates.

Continuous measurement of an atomic current

NASA Astrophysics Data System (ADS)

Laflamme, C.; Yang, D.; Zoller, P.

2017-04-01

We are interested in dynamics of quantum many-body systems under continuous observation, and its physical realizations involving cold atoms in lattices. In the present work we focus on continuous measurement of atomic currents in lattice models, including the Hubbard model. We describe a Cavity QED setup, where measurement of a homodyne current provides a faithful representation of the atomic current as a function of time. We employ the quantum optical description in terms of a diffusive stochastic Schrödinger equation to follow the time evolution of the atomic system conditional to observing a given homodyne current trajectory, thus accounting for the competition between the Hamiltonian evolution and measurement back action. As an illustration, we discuss minimal models of atomic dynamics and continuous current measurement on rings with synthetic gauge fields, involving both real space and synthetic dimension lattices (represented by internal atomic states). Finally, by "not reading" the current measurements the time evolution of the atomic system is governed by a master equation, where—depending on the microscopic details of our CQED setups—we effectively engineer a current coupling of our system to a quantum reservoir. This provides interesting scenarios of dissipative dynamics generating "dark" pure quantum many-body states.

A novel concept of fault current limiter based on saturable core in high voltage DC transmission system

NASA Astrophysics Data System (ADS)

Yuan, Jiaxin; Zhou, Hang; Gan, Pengcheng; Zhong, Yongheng; Gao, Yanhui; Muramatsu, Kazuhiro; Du, Zhiye; Chen, Baichao

2018-05-01

To develop mechanical circuit breaker in high voltage direct current (HVDC) system, a fault current limiter is required. Traditional method to limit DC fault current is to use superconducting technology or power electronic devices, which is quite difficult to be brought to practical use under high voltage circumstances. In this paper, a novel concept of high voltage DC transmission system fault current limiter (DCSFCL) based on saturable core was proposed. In the DCSFCL, the permanent magnets (PM) are added on both up and down side of the core to generate reverse magnetic flux that offset the magnetic flux generated by DC current and make the DC winding present a variable inductance to the DC system. In normal state, DCSFCL works as a smoothing reactor and its inductance is within the scope of the design requirements. When a fault occurs, the inductance of DCSFCL rises immediately and limits the steepness of the fault current. Magnetic field simulations were carried out, showing that compared with conventional smoothing reactor, DCSFCL can decrease the high steepness of DC fault current by 17% in less than 10ms, which verifies the feasibility and effectiveness of this method.

Forming a Turbomachinery Seals Working Group - An Overview and Discussion

NASA Technical Reports Server (NTRS)

Proctor, Margaret P.

2007-01-01

A proposal to form a Turbomachinery Seals Working Group is discussed. Survey responses regarding the purpose, membership, and meeting frequency are presented as well as the areas of expertise and experience of the respondents. The types of seals used, designed, or sold, current work, and technical challenges of turbomachinery seals, their materials, analysis, geometry, manufacturing, maintenance, testing, and incorporation into engine systems are also presented.

Psychological Sciences Division 1979 Programs.

DTIC Science & Technology

1979-11-01

the potential for substantially improving the ONR effectiveness of Navy undersea manipulator sys- tems. Computer aided controls can be used to Report...OPERATOR VIEWING AND CONTROL OF the operator enters control orders) to determine UNDERSEA VEHICLE AND WORK SYS- ihe structure and mode of command inputs...efforts focus upon a class of control-display ele- Current Navy submersible work systems, such as ments common to general purpose undersea work CURV

An intelligent healthcare management system: a new approach in work-order prioritization for medical equipment maintenance requests.

PubMed

Hamdi, Naser; Oweis, Rami; Abu Zraiq, Hamzeh; Abu Sammour, Denis

2012-04-01

The effective maintenance management of medical technology influences the quality of care delivered and the profitability of healthcare facilities. Medical equipment maintenance in Jordan lacks an objective prioritization system; consequently, the system is not sensitive to the impact of equipment downtime on patient morbidity and mortality. The current work presents a novel software system (EQUIMEDCOMP) that is designed to achieve valuable improvements in the maintenance management of medical technology. This work-order prioritization model sorts medical maintenance requests by calculating a priority index for each request. Model performance was assessed by utilizing maintenance requests from several Jordanian hospitals. The system proved highly efficient in minimizing equipment downtime based on healthcare delivery capacity, and, consequently, patient outcome. Additionally, a preventive maintenance optimization module and an equipment quality control system are incorporated. The system is, therefore, expected to improve the reliability of medical equipment and significantly improve safety and cost-efficiency.

Environmental interactions in space exploration: Environmental interactions working group

NASA Technical Reports Server (NTRS)

Kolecki, Joseph C.; Hillard, G. Barry

1992-01-01

With the advent of the Space Exploration Initiative, the possibility of designing and using systems on scales heretofore unattempted presents exciting new challenges in systems design and space science. The environments addressed by the Space Exploration Initiative include the surfaces of the Moon and Mars, as well as the varied plasma and field environments which will be encountered by humans and cargo enroute to these destinations. Systems designers will need to understand environmental interactions and be able to model these mechanisms from the earliest conceptual design stages through design completion. To the end of understanding environmental interactions and establishing robotic precursor mission requirements, an Environmental Interactions Working Group was established as part of the Robotic Missions Working Group. The working group is described, and its current activities are updated.

Conceptual Replaceability Analysis for Order and Standard Loan Tasks.

ERIC Educational Resources Information Center

California Univ., Santa Barbara. Library Systems Development Program.

Very preliminary systems concepts are presented for the Order and Standard Loan Subsystems. Each of the tasks defined for the current manual operations in (Library Systems Development) LSD 70-60 are evaluated against these concepts to determine how existing work will change when mechanized systems are installed. Then, utilizing this qualitative…

76 FR 37121 - Medicare Program; Second Semi-Annual Meeting of the Advisory Panel on Ambulatory Payment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... participate fully in the Panel's work. The expertise encompasses hospital payment systems; hospital medical care delivery systems; provider billing systems; APC groups; Current Procedural Terminology (CPT) codes... payment for, drugs, medical devices, and other services in the outpatient setting, as well as other forms...

Transgender women and the sex work industry: roots in systemic, institutional, and interpersonal discrimination.

PubMed

Nadal, Kevin L; Davidoff, Kristin C; Fujii-Doe, Whitney

2014-01-01

Because transgender people face discrimination on systemic, institutional, and interpersonal levels, the previous literature has supported that many transgender women view the sex work industry as their only viable career option. The current article reviews the literature on discrimination against transgender people, explores how discrimination influences their participation in sex work, and discusses how institutional discrimination against transgender women manifests within the criminal justice system. Furthermore, recommendations are provided for advocating for the rights of transgender people while promoting healthy behaviors and higher quality of life. Throughout the article, quotes from previous qualitative research are used to illustrate the experiences of transgender women through their own voices and perspectives.

The Rated Voltage Determination of DC Building Power Supply System Considering Human Beings Safety

NASA Astrophysics Data System (ADS)

Wang, Zhicheng; Yu, Kansheng; Xie, Guoqiang; Zou, Jin

2018-01-01

Generally two-level voltages are adopted for DC building power supply system. From the point of view of human beings safety, only the lower level voltage which may be contacted barehanded is discussed in this paper based on the related safety thresholds of human beings current effect. For several voltage levels below 100V recommended by IEC, the body current and current density of human electric shock under device normal work condition, as well as effect of unidirectional single impulse currents of short durations are calculated and analyzed respectively. Finally, DC 60V is recommended as the lower level rating voltage through the comprehensive consideration of technical condition and cost of safety criteria.

How a submarine returns to periscope depth: analysing complex socio-technical systems using Cognitive Work Analysis.

PubMed

Stanton, Neville A; Bessell, Kevin

2014-01-01

This paper presents the application of Cognitive Work Analysis to the description of the functions, situations, activities, decisions, strategies, and competencies of a Trafalgar class submarine when performing the function of returning to periscope depth. All five phases of Cognitive Work Analysis are presented, namely: Work Domain Analysis, Control Task Analysis, Strategies Analysis, Social Organisation and Cooperation Analysis, and Worker Competencies Analysis. Complex socio-technical systems are difficult to analyse but Cognitive Work Analysis offers an integrated way of analysing complex systems with the core of functional means-ends analysis underlying all of the other representations. The joined-up analysis offers a coherent framework for understanding how socio-technical systems work. Data were collected through observation and interviews at different sites across the UK. The resultant representations present a statement of how the work domain and current activities are configured in this complex socio-technical system. This is intended to provide a baseline, from which all future conceptions of the domain may be compared. The strength of the analysis is in the multiple representations from which the constraints acting on the work may be analysed. Future research needs to challenge the assumptions behind these constraints in order to develop new ways of working. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Model-based reasoning for system and software engineering: The Knowledge From Pictures (KFP) environment

NASA Technical Reports Server (NTRS)

Bailin, Sydney; Paterra, Frank; Henderson, Scott; Truszkowski, Walt

1993-01-01

This paper presents a discussion of current work in the area of graphical modeling and model-based reasoning being undertaken by the Automation Technology Section, Code 522.3, at Goddard. The work was initially motivated by the growing realization that the knowledge acquisition process was a major bottleneck in the generation of fault detection, isolation, and repair (FDIR) systems for application in automated Mission Operations. As with most research activities this work started out with a simple objective: to develop a proof-of-concept system demonstrating that a draft rule-base for a FDIR system could be automatically realized by reasoning from a graphical representation of the system to be monitored. This work was called Knowledge From Pictures (KFP) (Truszkowski et. al. 1992). As the work has successfully progressed the KFP tool has become an environment populated by a set of tools that support a more comprehensive approach to model-based reasoning. This paper continues by giving an overview of the graphical modeling objectives of the work, describing the three tools that now populate the KFP environment, briefly presenting a discussion of related work in the field, and by indicating future directions for the KFP environment.

What works and what doesn't work well in the US healthcare system.

PubMed

Luft, Harold S

2006-12-01

Most observers agree that the US healthcare system is expensive, provides variable quality and leaves many without coverage. The policy challenge is that there is little consensus on how to approach reform. Many proposals assume that systems appearing to work in one nation can be transferred in toto to another or, alternatively, that only minor tweaking of an existing system is possible. The former approach ignores fundamental social, political and legal realities, and the latter ignores the potential for increased benefits. Additionally, many proposals are ideologically driven, focusing on how to finance expanded coverage. Broadening the discussion to examine other components of the system that do not work well may identify sufficient benefits for various stakeholders to engage them in finding more comprehensive solutions that address a range of problems. This paper examines areas in which the US healthcare system performs worse than one would like and areas in which it appears to work well. In the first category is the high proportion of people without coverage, the inefficient and inequitable incentives for the purchase and provision of insurance, the problems in deciding what should be covered, the ineffective payment incentives, administrative costs and complexities, the variable quality and lack of responsiveness to patient preferences, the less than optimal safety, under-valued primary care, provider de-professionalisation, and the costs that appear to be on auto-pilot. In the second category is the rapid and wide-reaching technological innovation, the ready access to care for the insured, and clinical and patient autonomy. Among the things taken as given is our constitutional (rather than parliamentary) political system and underlying public values about the roles of individuals and government. Current players will be active in any debate about reform, so their interests must be addressed. Likewise, certain underlying economic and social drivers of behaviour will continue and should be considered in any reform proposal. Potentially changeable, however, are the roles and functions that the current players may take on in a new system. Likewise, health system-specific legislation should be as malleable as are financing approaches. A more expansive view of the health system's problems makes potential solutions more complex. By addressing problems faced by people currently with coverage and by providers and other stakeholders within the system, however, the benefits may be sufficiently widespread to create the political consensus that has so far eluded reformers in the US.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fajardo, E. A.; Zülicke, U.; Winkler, R.

We discuss the universal spin dynamics in quasi-one-dimensional systems including the real spin in narrow-gap semiconductors like InAs and InSb, the valley pseudospin in staggered single-layer graphene, and the combination of real spin and valley pseudospin characterizing single-layer transition metal dichalcogenides (TMDCs) such as MoS2, WS2, MoS2, and WSe2. All these systems can be described by the same Dirac-like Hamiltonian. Spin-dependent observable effects in one of these systems thus have counterparts in each of the other systems. Effects discussed in more detail include equilibrium spin currents, current-induced spin polarization (Edelstein effect), and spin currents generated via adiabatic spin pumping. Ourmore » work also suggests that a long-debated spin-dependent correction to the position operator in single-band models should be absent.« less

Atmospheric Infrasound during a Large Wildfire

NASA Astrophysics Data System (ADS)

Vance, Alexis; Elbing, Brian

2017-11-01

Numerous natural and manmade sources generate infrasound, including tornado producing storms, human heart, hurricanes, and volcanoes. Infrasound is currently being studied as part of Collaboration Leading Operational UAS Development for Meteorology and Atmospheric Physics (CLOUD MAP), which is a multi-university collaboration focused on development and implementation of unmanned aircraft systems (UAS) and integration with sensors for atmospheric measurements. To support this effort a fixed infrasonic microphone located in Stillwater, Oklahoma has been monitoring atmospheric emissions since September of 2016. While severe storm systems is the primary focus of this work, the system also captures a wide range of infrasonic sources from distances in excess of 300 miles due to an acoustic ceiling and weak atmospheric absorption. The current presentation will focus on atmospheric infrasound observations during a large wildfire on the Kansas-Oklahoma border that occurred between March 6-22, 2017. This work was supported by NSF Grant 1539070.

Constant voltage and constant current control implementation for electric vehicles (evs) wireless charger

NASA Astrophysics Data System (ADS)

Tampubolon, Marojahan; Pamungkas, Laskar; Hsieh, Yao Ching; Chiu, Huang Jen

2018-04-01

This paper presents the implementation of Constant Voltage (CV) and Constant Current (CC) control for a wireless charger system. A battery charging system needs these control modes to ensure the safety of the battery and the effectiveness of the charging system. Here, the wireless charger system does not employ any post-regulator stage to control the output voltage and output current of the charger. But, it uses a variable frequency control incorporated with a conventional PI control. As a result, the size and the weight of the system are reduced. This paper discusses the brief review of the SS-WPT, control strategy and implementation of the CV and CC control. Experimental hardware with 2kW output power has been performed and tested. The results show that the proposed CV and CC control method works well with the system.

Pharmaceutical liposomal drug delivery: a review of new delivery systems and a look at the regulatory landscape.

PubMed

Zylberberg, Claudia; Matosevic, Sandro

2016-11-01

Liposomes were the first nanoscale drug to be approved for clinical use in 1995. Since then, the technology has grown considerably, and pioneering recent work in liposome-based delivery systems has brought about remarkable developments with significant clinical implications. This includes long-circulating liposomes, stimuli-responsive liposomes, nebulized liposomes, elastic liposomes for topical, oral and transdermal delivery and covalent lipid-drug complexes for improved drug plasma membrane crossing and targeting to specific organelles. While the regulatory bodies' opinion on liposomes is well-documented, current guidance that address new delivery systems are not. This review describes, in depth, the current state-of-the-art of these new liposomal delivery systems and provides a critical overview of the current regulatory landscape surrounding commercialization efforts of higher-level complexity systems, the expected requirements and the hurdles faced by companies seeking to bring novel liposome-based systems for clinical use to market.

The UAS control segment architecture: an overview

NASA Astrophysics Data System (ADS)

Gregory, Douglas A.; Batavia, Parag; Coats, Mark; Allport, Chris; Jennings, Ann; Ernst, Richard

2013-05-01

The Under Secretary of Defense (Acquisition, Technology and Logistics) directed the Services in 2009 to jointly develop and demonstrate a common architecture for command and control of Department of Defense (DoD) Unmanned Aircraft Systems (UAS) Groups 2 through 5. The UAS Control Segment (UCS) Architecture is an architecture framework for specifying and designing the softwareintensive capabilities of current and emerging UCS systems in the DoD inventory. The UCS Architecture is based on Service Oriented Architecture (SOA) principles that will be adopted by each of the Services as a common basis for acquiring, integrating, and extending the capabilities of the UAS Control Segment. The UAS Task Force established the UCS Working Group to develop and support the UCS Architecture. The Working Group currently has over three hundred members, and is open to qualified representatives from DoD-approved defense contractors, academia, and the Government. The UCS Architecture is currently at Release 2.2, with Release 3.0 planned for July 2013. This paper discusses the current and planned elements of the UCS Architecture, and related activities of the UCS Community of Interest.

Development of a current collection loss management system for SDI homopolar power supplies

NASA Astrophysics Data System (ADS)

Brown, D. W.

1991-04-01

High speed, high power density current collection systems have been identified as an enabling technology required to construct homopolar power supplies to meet SDI missions. This work is part of a three-year effort directed towards the analysis, experimental verification, and prototype construction of a current collection system designed to operate continuously at 2 kA/sq cm, at a rubbing speed of 200 m/s, and with acceptable losses in a space environment. To date, no system has achieved these conditions simultaneously. This is the final report covering the three year period of performance on DOE contract AC03-86SF-16518. Major areas covered include design, construction and operation of a cryogenically cooled brush test rig, design and construction of a high speed brush test rig, optimization study for homopolar machines, loss analysis of the current collection system, and an application study which defines the air-core homopolar construction necessary to achieve the goal of 80 kW/kg generator power density.

Cerebrocerebellar networks during articulatory rehearsal and verbal working memory tasks.

PubMed

Chen, S H Annabel; Desmond, John E

2005-01-15

Converging evidence has implicated the cerebellum in verbal working memory. The current fMRI study sought to further characterize cerebrocerebellar participation in this cognitive process by revealing regions of activation common to a verbal working task and an articulatory control task, as well as regions that are uniquely activated by working memory. Consistent with our model's predictions, load-dependent activations were observed in Broca's area (BA 44/6) and the superior cerebellar hemisphere (VI/CrusI) for both working memory and motoric rehearsal. In contrast, activations unique to verbal working memory were found in the inferior parietal lobule (BA 40) and the right inferior cerebellum hemisphere (VIIB). These findings provide evidence for two cerebrocerebellar networks for verbal working memory: a frontal/superior cerebellar articulatory control system and a parietal/inferior cerebellar phonological storage system.

Optimization of thermoacoustic engine driven thermoacoustic refrigerator using response surface methodology

NASA Astrophysics Data System (ADS)

Desai, A. B.; Desai, K. P.; Naik, H. B.; Atrey, M. D.

2017-02-01

Thermoacoustic engines (TAEs) are devices which convert heat energy into useful acoustic work whereas thermoacoustic refrigerators (TARs) convert acoustic work into temperature gradient. These devices work without any moving component. Study presented here comprises of a combination system i.e. thermoacoustic engine driven thermoacoustic refrigerator (TADTAR). This system has no moving component and hence it is easy to fabricate but at the same time it is very challenging to design and construct optimized system with comparable performance. The work presented here aims to apply optimization technique to TADTAR in the form of response surface methodology (RSM). Significance of stack position and stack length for engine stack, stack position and stack length for refrigerator stack are investigated in current work. Results from RSM are compared with results from simulations using Design Environment for Low-amplitude Thermoacoustic Energy conversion (DeltaEC) for compliance.

Mimicking Nonequilibrium Steady States with Time-Periodic Driving

NASA Astrophysics Data System (ADS)

Raz, Oren; Subasi, Yigit; Jarzynski, Christopher

Under static conditions, a system satisfying detailed balance generically relaxes to an equilibrium state in which there are no currents: to generate persistent currents, either detailed balance must be broken or the system must be driven in a time-dependent manner. A stationary system that violates detailed balance evolves to a nonequilibrium steady state (NESS) characterized by fixed currents. Conversely, a system that satisfies instantaneous detailed balance but is driven by the time-periodic variation of external parameters - also known as a stochastic pump (SP) - reaches a periodic state with non-vanishing currents. In both cases, these currents are maintained at the cost of entropy production. Are these two paradigmatic scenarios effectively equivalent? For discrete-state systems we establish a mapping between NESS and SP. Given a NESS characterized by a particular set of stationary probabilities, currents and entropy production rates, we show how to construct a SP with exactly the same (time-averaged) values. The mapping works in the opposite direction as well. These results establish a proof of principle: they show that SP are able to mimic the behavior of NESS, and vice-versa, within the theoretical framework of discrete-state stochastic thermodynamics.

Design and Construction of an Entity Resolution System that Supports Entity Identity Information Management and Asserted Resolution

ERIC Educational Resources Information Center

Nelson, Eric Derrand

2011-01-01

This work describes the design and construction of an open source, entity resolution system that enables users to assign and maintain persistent identifiers for master data items. Two key features of this system that are not available in current ER systems and that make persistent identification possible are (1) The capture and management of…

Recultivating Intergenerational Resilience: Possibilities for "Scaling DEEP" through Disruptive Pedagogies of Decolonization and Reconciliation

ERIC Educational Resources Information Center

Williams, Lewis; Claxton, Nick

2017-01-01

In the face of declining human-ecological systems, as well as intercultural and interspecies trauma, we are currently witnessing a renaissance of activist-orientated environmental education. In Canada, this work is increasingly viewed as part of a broader healing response of "DEEP" reconciliation work between Indigenous and…

Designing and Developing a Work Experience Component for a Vocational Education Curriculum.

ERIC Educational Resources Information Center

Santos, Otto, Jr.; Olinzock, Anthony

A work experience component for vocational educator teacher education based on demonstrated competence is proposed. Its basis is research concerning vocational education; sociometric conditions and needs; analyses of the past, present, and future of vocational education; and the current state of the art relative to curriculum systems. This…

Statement on the Status and Working Conditions of Contingent Faculty

ERIC Educational Resources Information Center

Palmquist, Mike; Doe, Sue; McDonald, James; Newman, Beatrice Mendez; Samuels, Robert; Schell, Eileen

2011-01-01

In this paper, the authors call for an approach that, in recognizing the economic realities facing most institutions, attempts to put aside objections that funding is simply not available to support an expansion of the current tenure system. In calling for the changes in faculty working conditions, the authors recognize that change will…

The Effects of Values, Work Centrality, and Organizational Commitment on Organizational Citizenship Behaviors: Evidence from Turkish SMEs

ERIC Educational Resources Information Center

Ucanok, Basak; Karabati, Serdar

2013-01-01

Organizational citizenship behaviors (OCBs) are voluntary contributions of employees not explicitly recognized by the formal reward system and are ultimately critical for sustaining organizational effectiveness (Organ, 1988). The current study aims to investigate the effects of values, work centrality, and organizational commitment on…

Relationships between work-related factors and musculoskeletal health with current and future work ability among male workers.

PubMed

Boschman, J S; Noor, A; Lundström, R; Nilsson, T; Sluiter, J K; Hagberg, M

2017-08-01

The purpose was to increase job-specific knowledge about individual and work-related factors and their relationship with current and future work ability (WA). We studied cross-sectional relationships between mental demands, physical exertion during work, grip strength, musculoskeletal pain in the upper extremities and WA and the relationships between these variables and WA 11 years later. We used a dataset of a prospective cohort study (1997-2008) among employees of an engineering plant (n = 157). The cohort was surveyed by means of tests and written questions on work demands, musculoskeletal health, WA score (WAS; 0-10), and mental and physical WA. Spearman correlation coefficients and logistic regression analysis were used. Among manual workers, we found weak correlations between grip strength and current and future physical WA. We did not find predictors for future poor WA among the manual workers. Among the office workers, we found that musculoskeletal pain was moderately and negatively related to current WAS and physical WA. More handgrip strength related to better future WAS and physical WA. Musculoskeletal pain (OR 1.67 p < 0.01) and lower handgrip strength (OR 0.91 p < 0.05) predicted future poor WA among office workers. Our results showed cross-sectional and longitudinal relationships between musculoskeletal health and work ability depending on occupation. However, the present implies that predicting work ability in the far future based on health surveillance data is rather difficult. Testing the musculoskeletal system (grip strength) and asking workers' about their musculoskeletal health seems relevant when monitoring work ability.

Design of an image-distribution service from a clinical PACS

NASA Astrophysics Data System (ADS)

Gehring, Dale G.; Persons, Kenneth R.; Rothman, Melvyn L.; Felmlee, Joel P.; Gerhart, D. J.; Hangiandreou, Nicholas J.; Reardon, Frank J.; Shirk, M.; Forbes, Glenn S.; Williamson, Byrn, Jr.

1994-05-01

A PACS system has been developed through a multi-phase collaboration between the Mayo Clinic and IBM/Rochester. The current system has been fully integrated into the clinical practice of the Radiology Department for the primary purpose of digital image archival, retrieval, and networked workstation review. Work currently in progress includes the design and implementation of a gateway device for providing digital image data to third-party workstations, laser printers, and other devices, for users both within and outside of the Radiology Department.

Employing socially driven techniques for framing, contextualization, and collaboration in complex analytical threads

NASA Astrophysics Data System (ADS)

Wollocko, Arthur; Danczyk, Jennifer; Farry, Michael; Jenkins, Michael; Voshell, Martin

2015-05-01

The proliferation of sensor technologies continues to impact Intelligence Analysis (IA) work domains. Historical procurement focus on sensor platform development and acquisition has resulted in increasingly advanced collection systems; however, such systems often demonstrate classic data overload conditions by placing increased burdens on already overtaxed human operators and analysts. Support technologies and improved interfaces have begun to emerge to ease that burden, but these often focus on single modalities or sensor platforms rather than underlying operator and analyst support needs, resulting in systems that do not adequately leverage their natural human attentional competencies, unique skills, and training. One particular reason why emerging support tools often fail is due to the gap between military applications and their functions, and the functions and capabilities afforded by cutting edge technology employed daily by modern knowledge workers who are increasingly "digitally native." With the entry of Generation Y into these workplaces, "net generation" analysts, who are familiar with socially driven platforms that excel at giving users insight into large data sets while keeping cognitive burdens at a minimum, are creating opportunities for enhanced workflows. By using these ubiquitous platforms, net generation analysts have trained skills in discovering new information socially, tracking trends among affinity groups, and disseminating information. However, these functions are currently under-supported by existing tools. In this paper, we describe how socially driven techniques can be contextualized to frame complex analytical threads throughout the IA process. This paper focuses specifically on collaborative support technology development efforts for a team of operators and analysts. Our work focuses on under-supported functions in current working environments, and identifies opportunities to improve a team's ability to discover new information and disseminate insightful analytic findings. We describe our Cognitive Systems Engineering approach to developing a novel collaborative enterprise IA system that combines modern collaboration tools with familiar contemporary social technologies. Our current findings detail specific cognitive and collaborative work support functions that defined the design requirements for a prototype analyst collaborative support environment.

Web-GIS based information management system to Bureau of Law Enforcement for Urban Managementenforcement for urban management

NASA Astrophysics Data System (ADS)

Sun, Hai; Wang, Cheng; Ren, Bo

2007-06-01

Daily works of Law Enforcement Bureau are crucial in the urban management. However, with the development of the city, the information and data which are relative to Law Enforcement Bureau's daily work are increasing and updating. The increasing data result in that some traditional work is limited and inefficient in daily work. Analyzing the demands and obstacles of Law Enforcement Bureau, the paper proposes a new method to solve these problems. A web-GIS based information management system was produced for Bureau of Law Enforcement for Urban Management of Foshan. First part of the paper provides an overview of the system. Second part introduces the architecture of system and data organization. In the third part, the paper describes the design and implement of functional modules detailedly. In the end, this paper is concluded and proposes some strategic recommendations for the further development of the system. This paper focuses on the architecture and implementation of the system, solves the developing issues based on ArcServer, and introduces a new concept to the local government to solve the current problems. Practical application of this system showed that it played very important role in the Law Enforcement Bureau's work.

Work Coordination Engine

NASA Technical Reports Server (NTRS)

Zendejas, Silvino; Bui, Tung; Bui, Bach; Malhotra, Shantanu; Chen, Fannie; Kim, Rachel; Allen, Christopher; Luong, Ivy; Chang, George; Sadaqathulla, Syed

2009-01-01

The Work Coordination Engine (WCE) is a Java application integrated into the Service Management Database (SMDB), which coordinates the dispatching and monitoring of a work order system. WCE de-queues work orders from SMDB and orchestrates the dispatching of work to a registered set of software worker applications distributed over a set of local, or remote, heterogeneous computing systems. WCE monitors the execution of work orders once dispatched, and accepts the results of the work order by storing to the SMDB persistent store. The software leverages the use of a relational database, Java Messaging System (JMS), and Web Services using Simple Object Access Protocol (SOAP) technologies to implement an efficient work-order dispatching mechanism capable of coordinating the work of multiple computer servers on various platforms working concurrently on different, or similar, types of data or algorithmic processing. Existing (legacy) applications can be wrapped with a proxy object so that no changes to the application are needed to make them available for integration into the work order system as "workers." WCE automatically reschedules work orders that fail to be executed by one server to a different server if available. From initiation to completion, the system manages the execution state of work orders and workers via a well-defined set of events, states, and actions. It allows for configurable work-order execution timeouts by work-order type. This innovation eliminates a current processing bottleneck by providing a highly scalable, distributed work-order system used to quickly generate products needed by the Deep Space Network (DSN) to support space flight operations. WCE is driven by asynchronous messages delivered via JMS indicating the availability of new work or workers. It runs completely unattended in support of the lights-out operations concept in the DSN.

A Review of Decision Support Systems for Smart Homes in the Health Care System.

PubMed

Baumgärtel, Diana; Mielke, Corinna; Haux, Reinhold

2018-01-01

The use of decision support systems for smart homes can provide attractive solutions for challenges that have arisen in the Health Care System due to ageing of society. In order to provide an overview of current research projects in this field, a systematic literature review was performed according to the PRISMA approach. The aims of this work are to provide an overview of current research projects and to update a similar study from 2012. The literature search engines IEEE Xplore and PubMed were used. 23 papers were included. Most of the systems presented are developed for monitoring the patient regardless of their illness. For decision support, mainly rule-based approaches are used.

NASA's Radioisotope Power Systems Planning and Potential Future Systems Overview

NASA Technical Reports Server (NTRS)

Zakrajsek, June F.; Woerner, Dave F.; Cairns-Gallimore, Dirk; Johnson, Stephen G.; Qualls, Louis

2016-01-01

The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), assesses the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Program's budgetary needs, and disseminates current information about RPS to the community of potential users. This process has been refined and used to determine the current content of the RPS Program's portfolio. This portfolio currently includes an effort to mature advanced thermoelectric technology for possible integration into an enhanced Multi-Mission Radioisotope Generator (eMMRTG), sustainment and production of the currently deployed MMRTG, and technology investments that could lead to a future Stirling Radioisotope Generator (SRG). This paper describes the program planning processes that have been used, the currently available MMRTG, and one of the potential future systems, the eMMRTG.

NASA's Radioisotope Power Systems Planning and Potential Future Systems Overview

NASA Technical Reports Server (NTRS)

Zakrajsek, June F.; Woerner, Dave F.; Cairns-Gallimore, Dirk; Johnson, Stephen G.; Qualis, Louis

2016-01-01

The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), assesses the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Programs budgetary needs, and disseminates current information about RPS to the community of potential users. This process has been refined and used to determine the current content of the RPS Programs portfolio. This portfolio currently includes an effort to mature advanced thermoelectric technology for possible integration into an enhanced Multi-Mission Radioisotope Generator (eMMRTG), sustainment and production of the currently deployed MMRTG, and technology investments that could lead to a future Stirling Radioisotope Generator (SRG). This paper describes the program planning processes that have been used, the currently available MMRTG, and one of the potential future systems, the eMMRTG.

Border-wide assessment of intelligent transportation system (ITS) technology : current and future concepts.

DOT National Transportation Integrated Search

2012-07-01

The purpose of this effort was to conduct a border-wide assessment of the use of intelligent transportation systems (ITS) technologies and operational concepts at and near land border crossings between the U.S. and Mexico. The work focused on tolling...

Preparing for the Millennium.

ERIC Educational Resources Information Center

Scaglione, Chris

1998-01-01

In 2000, any automated system that processes dates may stop working completely or produce unexpected or unwanted results. School administrators should obtain a complete listing of all currently used systems, prioritize them, contact hardware and software providers to verify Y2K compliance, develop resolution plans with vendors, develop assessment…

Research opportunities in cardiovascular deconditioning, phase 1

NASA Technical Reports Server (NTRS)

Levy, M. N. (Editor); Talbot, J. M. (Editor)

1983-01-01

The deconditioning of the cardiovascular system that occurs during spaceflight, NASA's current and projected research program, and the conclusions and suggestions of the ad hoc Working Group are summarized.

Proceedings of oceans 87. The ocean - an international workplace

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-01-01

This book includes proceedings containing 347 papers. Some of the topics are: ICE -Cold ocean and ice research; ICE-1-Icebergs; ICE-2-Sea ice and structures; IE-3-Cold ocean instrumentation; ICE-4-Ocean and ice; INS-Oceanographic instrumentation; INS-1-Acoustic Doppler Current profilers; ENG-1-New solutions to old problems; ENG-2-energy from the ocean; ENG-3-Cables and connectors; POL-Policy, education and technology transfer; POL-1-International issues; POL-2-Ocean space utilization; POL-3-Economics, planning and management; SCI-6-fish stock assessment; ACI-7-Coastal currents and sediment; SCI-9-Satellite navigation; SCI-10-Deep sea minerals and methods of recovery; ODS-Fifth working symposium on oceanographic data system; ODS-1-Data base management; UND-Underwater work systems; UND-1-Diving for science.

Preventing type 2 diabetes: Changing the food industry

PubMed Central

Popkin, Barry M.; Kenan, W. R.

2016-01-01

Improving our global diet by working with the food industry is a fairly complex task. Previously the global food manufacturing companies and governments were the major players. However, matters have shifted rapidly so that food retailers, food manufacturers, the restaurant–food service sector, and agribusinesses are now the major players. The current modern system of packaged processed food has now penetrated the globe—rich and poor, rural and urban are all in reach of this food system. Consequently, working with this complex sector when possible and an array of governmental regulatory large-scale options to improve our diet have increased in importance. Taxation of unhealthy foods and beverages, marketing controls, and front of the package labeling are the primary current options. Evaluations of the impacts of both public and industry initiatives are needed. PMID:27432072

A Multimodal Dialog System for Language Assessment: Current State and Future Directions. Research Report. ETS RR-17-21

ERIC Educational Resources Information Center

Suendermann-Oeft, David; Ramanarayanan, Vikram; Yu, Zhou; Qian, Yao; Evanini, Keelan; Lange, Patrick; Wang, Xinhao; Zechner, Klaus

2017-01-01

We present work in progress on a multimodal dialog system for English language assessment using a modular cloud-based architecture adhering to open industry standards. Among the modules being developed for the system, multiple modules heavily exploit machine learning techniques, including speech recognition, spoken language proficiency rating,…

Experiences of Two Multidisciplinary Team Members of Systemic Consultations in a Community Learning Disability Service

ERIC Educational Resources Information Center

Johnson, Clair; Viljoen, Nina

2017-01-01

Background: Systemic approaches can be useful in working with people with learning disabilities and their network. The evidence base for these approaches within the field of learning disabilities, however, is currently limited. Materials and Methods: This article presents part of a service evaluation of systemic consultations in a Community…

Only Self-Generated Actions Create Sensori-Motor Systems in the Developing Brain

ERIC Educational Resources Information Center

James, Karin Harman; Swain, Shelley N.

2011-01-01

Previous research shows that sensory and motor systems interact during perception, but how these connections among systems are created during development is unknown. The current work exposes young children to novel "verbs" and objects through either (a) actively exploring the objects or (b) by seeing an experimenter interact with the objects.…

Water recovery and solid waste processing for aerospace and domestic applications

NASA Technical Reports Server (NTRS)

Murawczyk, C.

1973-01-01

The work is described accomplished in compiling information needed to establish the current water supply and waste water processing requirements for dwellings, and for developing a preliminary design for a waste water to potable water management system. Data generated was used in formulation of design criteria for the preliminary design of the waste water to potable water recycling system. The system as defined was sized for a group of 500 dwelling units. Study tasks summarized include: water consumption, nature of domestic water, consumer appliances for low water consumption, water quality monitoring, baseline concept, and current and projected costs.

Health information technology: a few years of magical thinking?

PubMed

Diamond, Carol C; Shirky, Clay

2008-01-01

One of the biggest obstacles to expanding the use of information technology (IT) in health care may be the current narrow focus on how to stimulate its adoption. The challenge of thinking of IT as a tool to improve quality requires serious attention to transforming the U.S. health care system as a whole, rather than simply computerizing the current setup. Proponents of health IT must resist "magical thinking," such as the notion that technology will transform our broken system, absent integrated work on policy or incentives. The alternative route to transforming the system sets all of its sights on the destination.

Remote sensing of oceanic phytoplankton - Present capabilities and future goals

NASA Technical Reports Server (NTRS)

Esaias, W. E.

1980-01-01

A description is given of current work in the development of sensors, and their integration into increasingly powerful systems, for oceanic phytoplankton abundance estimation. Among the problems relevant to such work are phytoplankton ecology, the spatial and temporal domains, available sensor platforms, and sensor combinations. Among the platforms considered are satellites, aircraft, tethered balloons, helicopters, ships, and the Space Shuttle. Sensors discussed include microwave radiometers, laser fluorosensors, microwave scatterometers, multispectral scanners, Coastal Ocean Dynamics Radar (CODAR), and linear array detectors. Consideration is also given to the prospects for such future sensor systems as the National Oceanic Satellite System (NOSS) and the Airborne Integrated Mapping System (AIMS).

Ultrasound to video registration using a bi-plane transrectal probe with photoacoustic markers

NASA Astrophysics Data System (ADS)

Cheng, Alexis; Kang, Hyun Jae; Zhang, Haichong K.; Taylor, Russell H.; Boctor, Emad M.

2016-03-01

Modern surgical scenarios typically provide surgeons with additional information through fusion of video and other imaging modalities. To provide this information, the tools and devices used in surgery must be registered together with interventional guidance equipment and surgical navigation systems. In this work, we focus explicitly on registering ultrasound with a stereo camera system using photoacoustic markers. Previous work has shown that photoacoustic markers can be used in this registration task to achieve target registration errors lower than the current available systems. Photoacoustic markers are defined as a set of non-collinear laser spots projected onto some surface. They can be simultaneously visualized by a stereo camera system and an ultrasound transducer because of the photoacoustic effect. In more recent work, the three-dimensional ultrasound volume was replaced by images from a single ultrasound image pose from a convex array transducer. The feasibility of this approach was demonstrated, but the accuracy was lacking due to the physical limitations of the convex array transducer. In this work, we propose the use of a bi-plane transrectal ultrasound transducer. The main advantage of using this type of transducer is that the ultrasound elements are no longer restricted to a single plane. While this development would be limited to prostate applications, liver and kidney applications are also feasible if a suitable transducer is built. This work is demonstrated in two experiments, one without photoacoustic sources and one with. The resulting target registration error for these experiments were 1.07mm±0.35mm and 1.27mm+/-0.47mm respectively, both of which are better than current available navigation systems.

Composable Analytic Systems for next-generation intelligence analysis

NASA Astrophysics Data System (ADS)

DiBona, Phil; Llinas, James; Barry, Kevin

2015-05-01

Lockheed Martin Advanced Technology Laboratories (LM ATL) is collaborating with Professor James Llinas, Ph.D., of the Center for Multisource Information Fusion at the University at Buffalo (State of NY), researching concepts for a mixed-initiative associate system for intelligence analysts to facilitate reduced analysis and decision times while proactively discovering and presenting relevant information based on the analyst's needs, current tasks and cognitive state. Today's exploitation and analysis systems have largely been designed for a specific sensor, data type, and operational context, leading to difficulty in directly supporting the analyst's evolving tasking and work product development preferences across complex Operational Environments. Our interactions with analysts illuminate the need to impact the information fusion, exploitation, and analysis capabilities in a variety of ways, including understanding data options, algorithm composition, hypothesis validation, and work product development. Composable Analytic Systems, an analyst-driven system that increases flexibility and capability to effectively utilize Multi-INT fusion and analytics tailored to the analyst's mission needs, holds promise to addresses the current and future intelligence analysis needs, as US forces engage threats in contested and denied environments.

3D "spectracoustic" system: a modular, tomographic, spectroscopic mapping imaging, non-invasive, diagnostic system for detection of small starting developing tumors like melanoma

NASA Astrophysics Data System (ADS)

Karagiannis, Georgios

2017-03-01

This work led to a new method named 3D spectracoustic tomographic mapping imaging. The current and the future work is related to the fabrication of a combined acoustic microscopy transducer and infrared illumination probe permitting the simultaneous acquisition of the spectroscopic and the tomographic information. This probe provides with the capability of high fidelity and precision registered information from the combined modalities named spectracoustic information.

Evidence for non-conservative current-induced forces in the breaking of Au and Pt atomic chains.

PubMed

Sabater, Carlos; Untiedt, Carlos; van Ruitenbeek, Jan M

2015-01-01

This experimental work aims at probing current-induced forces at the atomic scale. Specifically it addresses predictions in recent work regarding the appearance of run-away modes as a result of a combined effect of the non-conservative wind force and a 'Berry force'. The systems we consider here are atomic chains of Au and Pt atoms, for which we investigate the distribution of break down voltage values. We observe two distinct modes of breaking for Au atomic chains. The breaking at high voltage appears to behave as expected for regular break down by thermal excitation due to Joule heating. However, there is a low-voltage breaking mode that has characteristics expected for the mechanism of current-induced forces. Although a full comparison would require more detailed information on the individual atomic configurations, the systems we consider are very similar to those considered in recent model calculations and the comparison between experiment and theory is very encouraging for the interpretation we propose.

Evidence for non-conservative current-induced forces in the breaking of Au and Pt atomic chains

PubMed Central

Sabater, Carlos; Untiedt, Carlos

2015-01-01

Summary This experimental work aims at probing current-induced forces at the atomic scale. Specifically it addresses predictions in recent work regarding the appearance of run-away modes as a result of a combined effect of the non-conservative wind force and a ‘Berry force’. The systems we consider here are atomic chains of Au and Pt atoms, for which we investigate the distribution of break down voltage values. We observe two distinct modes of breaking for Au atomic chains. The breaking at high voltage appears to behave as expected for regular break down by thermal excitation due to Joule heating. However, there is a low-voltage breaking mode that has characteristics expected for the mechanism of current-induced forces. Although a full comparison would require more detailed information on the individual atomic configurations, the systems we consider are very similar to those considered in recent model calculations and the comparison between experiment and theory is very encouraging for the interpretation we propose. PMID:26734525

Fuse Selection for the Two-Stage Explosive Type Switches

NASA Astrophysics Data System (ADS)

Muravlev, I. O.; Surkov, M. A.; Tarasov, E. V.; Uvarov, N. F.

2017-04-01

In the two-level explosive switch destruction of a delay happens in the form of electric explosion. Criteria of similarity of electric explosion in transformer oil are defined. The challenge of protecting the power electrical equipment from short circuit currents is still urgent, especially with the growth of unit capacity. Is required to reduce the tripping time as much as possible, and limit the amplitude of the fault current, that is very important for saving of working capacity of life-support systems. This is particularly important when operating in remote stand-alone power supply systems with a high share of renewable energy, working through the inverter transducers, as well as inverter-type diesel generators. The explosive breakers copes well with these requirements. High-speed flow of transformer oil and high pressure provides formation rate of a contact gap of 20 - 100 m/s. In these conditions there is as a rapid increase in voltage on the discontinuity, and recovery of electric strength (Ures) after current interruption.

A portable bioelectronic sensing system (BESSY) for environmental deployment incorporating differential microbial sensing in miniaturized reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Alyssa Y.; Baruch, Moshe; Ajo-Franklin, Caroline M.

Current technologies are lacking in the area of deployable, in situ monitoring of complex chemicals in environmental applications. Microorganisms metabolize various chemical compounds and can be engineered to be analyte-specific making them naturally suited for robust chemical sensing. But, current electrochemical microbial biosensors use large and expensive electrochemistry equipment not suitable for on-site, real-time environmental analysis. We demonstrate a miniaturized, autonomous bioelectronic sensing system (BESSY) suitable for deployment for instantaneous and continuous sensing applications. We developed a 2x2 cm footprint, low power, two-channel, three-electrode electrochemical potentiostat which wirelessly transmits data for on-site microbial sensing. Furthermore, we designed a new waymore » of fabricating self-contained, submersible, miniaturized reactors (m-reactors) to encapsulate the bacteria, working, and counter electrodes. We have validated the BESSY’s ability to specifically detect a chemical amongst environmental perturbations using differential current measurements. This work paves the way for in situ microbial sensing outside of a controlled laboratory environment.« less

Crew Exploration Vehicle Environmental Control and Life Support Fire Protection Approach

NASA Technical Reports Server (NTRS)

Lewis, John F.; Barido, Richard; Tuan, George C.

2007-01-01

As part of preparing for the Crew Exploration Vehicle (CEV), the National Aeronautics and Space Administration (NASA) worked on developing the requirements to manage the fire risk. The new CEV poses unique challenges to current fire protection systems. The size and configuration of the vehicle resembles the Apollo capsule instead of the current Space Shuttle or the International Space Station. The smaller free air volume and fully cold plated avionic bays of the CEV requires a different approach in fire protection than the ones currently utilized. The fire protection approach discussed in this paper incorporates historical lessons learned and fire detection and suppression system design philosophy spanning from Apollo to the International Space Station. Working with NASA fire and materials experts, this approach outlines the best requirements for both the closed out area of the vehicle, such as the avionics bay, and the crew cabin area to address the unique challenges due to the size and configuration of the CEV.

A portable bioelectronic sensing system (BESSY) for environmental deployment incorporating differential microbial sensing in miniaturized reactors

DOE PAGES

Zhou, Alyssa Y.; Baruch, Moshe; Ajo-Franklin, Caroline M.; ...

2017-09-15

Current technologies are lacking in the area of deployable, in situ monitoring of complex chemicals in environmental applications. Microorganisms metabolize various chemical compounds and can be engineered to be analyte-specific making them naturally suited for robust chemical sensing. But, current electrochemical microbial biosensors use large and expensive electrochemistry equipment not suitable for on-site, real-time environmental analysis. We demonstrate a miniaturized, autonomous bioelectronic sensing system (BESSY) suitable for deployment for instantaneous and continuous sensing applications. We developed a 2x2 cm footprint, low power, two-channel, three-electrode electrochemical potentiostat which wirelessly transmits data for on-site microbial sensing. Furthermore, we designed a new waymore » of fabricating self-contained, submersible, miniaturized reactors (m-reactors) to encapsulate the bacteria, working, and counter electrodes. We have validated the BESSY’s ability to specifically detect a chemical amongst environmental perturbations using differential current measurements. This work paves the way for in situ microbial sensing outside of a controlled laboratory environment.« less

Arrester Resistive Current Measuring System Based on Heterogeneous Network

NASA Astrophysics Data System (ADS)

Zhang, Yun Hua; Li, Zai Lin; Yuan, Feng; Hou Pan, Feng; Guo, Zhan Nan; Han, Yue

2018-03-01

Metal Oxide Arrester (MOA) suffers from aging and poor insulation due to long-term impulse voltage and environmental impact, and the value and variation tendency of resistive current can reflect the health conditions of MOA. The common wired MOA detection need to use long cables, which is complicated to operate, and that wireless measurement methods are facing the problems of poor data synchronization and instability. Therefore a novel synchronous measurement system of arrester current resistive based on heterogeneous network is proposed, which simplifies the calculation process and improves synchronization, accuracy and stability and of the measuring system. This system combines LoRa wireless network, high speed wireless personal area network and the process layer communication, and realizes the detection of arrester working condition. Field test data shows that the system has the characteristics of high accuracy, strong anti-interference ability and good synchronization, which plays an important role in ensuring the stable operation of the power grid.

Evaluating Teachers' Preparedness to Work With Students Who Are Deaf and Hard of Hearing With Disabilities.

PubMed

Guardino, Caroline

2015-01-01

A national survey was conducted to determine the needs of teachers and service providers working with students who are deaf and hard of hearing with disabilities (DWD). Quantitative and qualitative questions were asked regarding knowledge of, training with, and strategies used with students who are DWD. Responses from 264 professionals working with this population are reported. Results are reviewed and tied to previous research before and after the 2008 revalidation of the Council on Education of the Deaf standards for teachers of the deaf. Final recommendations are made for (a) virtual learning opportunities, (b) hands-on field experiences and course work in teacher preparation programs, and (c) empirically based research. By understanding the needs of professionals who are currently working with students who are DWD, researchers can help improve teacher preparation programs as well as improve the educational systems currently in place for these learners.

Improving Human/Autonomous System Teaming Through Linguistic Analysis

NASA Technical Reports Server (NTRS)

Meszaros, Erica L.

2016-01-01

An area of increasing interest for the next generation of aircraft is autonomy and the integration of increasingly autonomous systems into the national airspace. Such integration requires humans to work closely with autonomous systems, forming human and autonomous agent teams. The intention behind such teaming is that a team composed of both humans and autonomous agents will operate better than homogenous teams. Procedures exist for licensing pilots to operate in the national airspace system and current work is being done to define methods for validating the function of autonomous systems, however there is no method in place for assessing the interaction of these two disparate systems. Moreover, currently these systems are operated primarily by subject matter experts, limiting their use and the benefits of such teams. Providing additional information about the ongoing mission to the operator can lead to increased usability and allow for operation by non-experts. Linguistic analysis of the context of verbal communication provides insight into the intended meaning of commonly heard phrases such as "What's it doing now?" Analyzing the semantic sphere surrounding these common phrases enables the prediction of the operator's intent and allows the interface to supply the operator's desired information.

Modeling of outpatient prescribing process in iran: a gateway toward electronic prescribing system.

PubMed

Ahmadi, Maryam; Samadbeik, Mahnaz; Sadoughi, Farahnaz

2014-01-01

Implementation of electronic prescribing system can overcome many problems of the paper prescribing system, and provide numerous opportunities of more effective and advantageous prescribing. Successful implementation of such a system requires complete and deep understanding of work content, human force, and workflow of paper prescribing. The current study was designed in order to model the current business process of outpatient prescribing in Iran and clarify different actions during this process. In order to describe the prescribing process and the system features in Iran, the methodology of business process modeling and analysis was used in the present study. The results of the process documentation were analyzed using a conceptual model of workflow elements and the technique of modeling "As-Is" business processes. Analysis of the current (as-is) prescribing process demonstrated that Iran stood at the first levels of sophistication in graduated levels of electronic prescribing, namely electronic prescription reference, and that there were problematic areas including bottlenecks, redundant and duplicated work, concentration of decision nodes, and communicative weaknesses among stakeholders of the process. Using information technology in some activities of medication prescription in Iran has not eliminated the dependence of the stakeholders on paper-based documents and prescriptions. Therefore, it is necessary to implement proper system programming in order to support change management and solve the problems in the existing prescribing process. To this end, a suitable basis should be provided for reorganization and improvement of the prescribing process for the future electronic systems.

BOA: Asbestos pipe-insulation removal robot system, Phase 2. Topical report, January--June 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schempf, H.; Bares, J.E.

This report explored the regulatory impact and cost-benefit of a robotic thermal asbestos pipe-insulation removal system over the current manual abatement work practice. The authors are currently in the second phase of a two-phase program to develop a robotic asbestos abatement system, comprised of a ground-based support system (including vacuum, fluid delivery, computing/electronics/power, and other subsystems) and several on-pipe removal units, each sized to handle pipes within a given diameter range. The intent of this study was to (i) aid in developing design and operational criteria for the overall system to maximize cost-efficiency, and (ii) to determine the commercial potentialmore » of a robotic pipe-insulation abatement system.« less

Nondestructive evaluation techniques for high-temperature ceramic components. Quarterly report, October--December 1977. [Silicon carbide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-02-01

The overall objective of this program is to assess and develop nondestructive evaluation procedures for high-temperature ceramics. The program is currently evaluating ceramic heat-exchanger tubing. Ceramic heat exchangers would be useful, for example, in coal-fired Brayton conversion or waste heat-recovery systems. The use of ceramic heat exchangers will allow working fluids to reach temperatures up to 1230/sup 0/C, and, with further materials development, possibly 1650/sup 0/C. If superalloys were employed, working fluids would be limited to approximately 800/sup 0/C. The use of working fluids at higher temperatures would result in more efficient systems. Furthermore, ceramic components are lighter than metallicmore » ones and are made from less costly and more abundant elements. In addition, ceramic heat exchangers would be more resistant to corrosion. In the current NDE effort, several acoustic, optical, and radiographic techniques are being examined for their effectiveness in testing silicon carbide tubing. Some results employing dye-enhanced radiography are discussed.« less

A β-Ta system for current induced magnetic switching in the absence of external magnetic field

NASA Astrophysics Data System (ADS)

Chen, Wenzhe; Qian, Lijuan; Xiao, Gang

2018-05-01

Magnetic switching via Giant Spin Hall Effect (GSHE) has received great interest for its role in developing future spintronics logic or memory devices. In this work, a new material system (i.e. a transition metal sandwiched between two ferromagnetic layers) with interlayer exchange coupling is introduced to realize the deterministic field-free perpendicular magnetic switching. This system uses β-Ta, as the GSHE agent to generate a spin current and as the interlayer exchange coupling medium to generate an internal field. The critical switching current density at zero field is on the order of 106 A/cm2 due to the large spin Hall angle of β-Ta. The internal field, along with switching efficiency, depends strongly on the orthogonal magnetization states of two ferromagnetic coupling layers in this system.

Space Transportation Propulsion Systems

NASA Technical Reports Server (NTRS)

Liou, Meng-Sing; Stewart, Mark E.; Suresh, Ambady; Owen, A. Karl

2001-01-01

This report outlines the Space Transportation Propulsion Systems for the NPSS (Numerical Propulsion System Simulation) program. Topics include: 1) a review of Engine/Inlet Coupling Work; 2) Background/Organization of Space Transportation Initiative; 3) Synergy between High Performance Computing and Communications Program (HPCCP) and Advanced Space Transportation Program (ASTP); 4) Status of Space Transportation Effort, including planned deliverables for FY01-FY06, FY00 accomplishments (HPCCP Funded) and FY01 Major Milestones (HPCCP and ASTP); and 5) a review current technical efforts, including a review of the Rocket-Based Combined-Cycle (RBCC), Scope of Work, RBCC Concept Aerodynamic Analysis and RBCC Concept Multidisciplinary Analysis.

Quantitative diagnostics of multilayered composite structures with ultrasonic guided waves

NASA Astrophysics Data System (ADS)

Bunget, Gheorghe; Friedersdorf, Fritz; Na, Jeong K.

2015-03-01

The main objective of the current work is to develop a practical nondestructive inspection methodology for a highly sound absorbing composite structural system consisting of polymeric and metallic materials. Due to constraints in geometrical shapes and thicknesses of the composite system used in this work, ultrasonic guided wave approach has been chosen. Since the polymer coatings have high damping properties, less energy is dissipated into the adjacent media in the presence of interface delaminations. Experimental measurements performed on a targeted composite system, whether it has an aluminum, carbon-fiber-composite, or steel outer casing, show promising results.

Blueprint for a Learning System: Create One Larger, More Flexible Team That Encourages Collaboration in All Directions

ERIC Educational Resources Information Center

Ash, Paul B.; D'Auria, John

2013-01-01

Every day, teachers and administrators come to work and do the best job they know how. In the book "School Systems That Learn" (Ash & D'Auria, 2013), the authors argue that most school systems, as they are currently designed, have reached or nearly reached the limits of their capacity and that systemic change is necessary to…

A more general system for Poisson series manipulation.

NASA Technical Reports Server (NTRS)

Cherniack, J. R.

1973-01-01

The design of a working Poisson series processor system is described that is more general than those currently in use. This system is the result of a series of compromises among efficiency, generality, ease of programing, and ease of use. The most general form of coefficients that can be multiplied efficiently is pointed out, and the place of general-purpose algebraic systems in celestial mechanics is discussed.

Development and Testing of Space Fission Technology at NASA-MSFC

NASA Technical Reports Server (NTRS)

Polzin, Kurt; Pearson, J. Boise; Houts, Michael

2008-01-01

The Early Flight Fission Test Facility (EFF-TF) at NASA-Marshall Space Flight Center (MSFC) provides a capability to perform hardware-directed activities to support multiple inspace nuclear reactor concepts by using a non-nuclear test methodology. This includes fabrication and testing at both the module/component level and near prototypic reactor configurations allowing for realistic thermal-hydraulic evaluations of systems. The EFF-TF is currently performing non-nuclear testing of hardware to support a technology development effort related to an affordable fission surface power (AFSP) system that could be deployed on the Lunar surface. The AFSP system is presently based on a pumped liquid metal-cooled reactor design, which builds on US and Russian space reactor technology as well as extensive US and international terrestrial liquid metal reactor experience. An important aspect of the current hardware development effort is the information and insight that can be gained from experiments performed in a relevant environment using realistic materials. This testing can often deliver valuable data and insights with a confidence that is not otherwise available or attainable. While the project is currently focused on potential fission surface power for the lunar surface, many of the present advances, testing capabilities, and lessons learned can be applied to the future development of a low-cost in-space fission power system. The potential development of such systems would be useful in fulfilling the power requirements for certain electric propulsion systems (magnetoplasmadynamic thruster, high-power Hall and ion thrusters). In addition, inspace fission power could be applied towards meeting spacecraft and propulsion needs on missions further from the Sun, where the usefulness of solar power is diminished. The affordable nature of the fission surface power system that NASA may decide to develop in the future might make derived systems generally attractive for powering spacecraft and propulsion systems in space. This presentation will discuss work on space nuclear systems that has been performed at MSFC's EFF-TF over the past 10 years. Emphasis will be place on both ongoing work related to FSP and historical work related to in-space systems potentially useful for powering electric propulsion systems.

Motor Controllers

NASA Technical Reports Server (NTRS)

1984-01-01

Kollmorgen Corporation's Mermaid II two person submersible is propeller-driven by a system of five DC brushless motors with new electronic controllers that originated in work performed in a NASA/DOE project managed by Lewis Research Center. A key feature of the system is electric commutation rather than mechanical commutation for converting AC current to DC.

A Plan For a Publication Network For Rapid Dissemination of Technical Information.

ERIC Educational Resources Information Center

MacLachlan, James

This paper describes an alternative to current information dissemination systems (letter journals), computerized information systems, and clearinghouse operations) that would establish a network of depositories at universities and research organizations. The essence of the approach is to provide convenient access to working papers and technical…

U.S. Army Corps of Engineers Geospatial Data and Systems Management

DOT National Transportation Integrated Search

2000-11-01

To help the U.S. Army Corps of Engineers manage its substantial investment in geospatial data and systems (GD&S), a review of the current state of GD&S in the Districts and Divisions was needed. The authors surveyed employees involved in GD&S work in...

Workshop on Instructional Features and Instructor/Operator Station Design for Training Systems.

ERIC Educational Resources Information Center

Ricard, G. L., Ed.; And Others

These 19 papers review current research and development work related to the operation of the instructor's station of training systems, with emphasis on developing functional station specifications applicable to a variety of simulation-based training situations. Topics include (1) instructional features; (2) instructor/operator station research and…

Current Investments in the NASA Entry Systems Modeling Project

NASA Technical Reports Server (NTRS)

Wright, Michael; Barnhardt, Michael; Hughes, Monica

2017-01-01

This talk will provide an overview of investments in the Entry Systems Modeling project, along with some context of where the effort sits in the overall Space Technology EDL Portfolio. Technical highlights, particularly with referent to work on Ablation Modeling, will be given. Future directions will be discussed.

Establishing a Child Care Substitute Caregiver System.

ERIC Educational Resources Information Center

Love, Lynne

Substitute caregivers are needed by day care centers in every state. Indeed, some areas are experiencing severe shortages of applicants for child care positions and short-term substitute work. This article describes problems encountered in current substitute caregiver systems and suggests ways of dealing with such problems. Specifically discussed…

THE OCCURRENCE OF CONTAMINANT ACCUMULATION IN LEAD PIPE SCALES FROM DOMESTIC DRINKING WATER DISTRIBUTION SYSTEMS

EPA Science Inventory

Previous work has shown that contaminants, such as Al, As and Ra, can accumulate in drinking water distribution system solids. The release of accumulated contaminants back into the water supply could result in elevated levels at consumers’ taps, and current monitoring practices d...

The Occurrence of Contaminant Accumulation in Lead Pipe Scales from Domestic Drinking Water Distribution Systems-ABSTRACT

EPA Science Inventory

Previous work has shown that contaminants such as Al, As and Ra, can accumulate in drinking water distribution system solids. The release of accumulated contaminants back into the water supply could conceivably result in elevated levels at consumers’ taps. The current regulatory...

The Relevance of AI Research to CAI.

ERIC Educational Resources Information Center

Kearsley, Greg P.

This article provides a tutorial introduction to Artificial Intelligence (AI) research for those involved in Computer Assisted Instruction (CAI). The general theme is that much of the current work in AI, particularly in the areas of natural language understanding systems, rule induction, programming languages, and socratic systems, has important…

[Global Adult Tobacco Survey in Poland--the aim and current experiences].

PubMed

Kaleta, Dorota; Kozieł, Anna; Miśkiewicz, Paulina

2009-01-01

Poland is one of the countries, where smoking is widely spread and smoking-induced diseases have become a significant health and socio-economic issue. Since 1999, the World Health Organization (WHO) and Centers for Disease Control and Prevention (CDC), in cooperation with partner organizations have been working on the implementation of the global control system known as the Global Tobacco Surveillance System (GTSS). This system expands the opportunities of individual countries in the area of designing, implementing and evaluating comprehensive anti-tobacco programs. The Global Adult Tobacco Survey (GATS) has been incorporated into the GTSS system in 2007. The aim of the work is to explain and promote the objectives of GATS and the process of its implementation in Poland based on current experiences of the WHO Country Office for Poland. GATS concentrates on monitoring of tobacco use by adults (aged over 15 years). It is a representative, national survey of households, standardized on a global scale. GATS is supported by Bloomberg Philanthropies as a part of the Bloomberg Global Initiative to Reduce Tobacco Use. Two executive agencies, the M. Skłodowska-Curie Institute of Oncology, Warsaw and the Warsaw Medical University, have been assigned to implement the Global Adult Tobacco Survey in Poland. The prepatory works for pre-testing and further stages of the survey implementation are currently under the final phase. Data gathered by GATS will enable us to learn more about the use of tobacco by the adult population in Poland. They will also indicate the most effective methods of the tobacco control in our country.

Transforming School Conditions: Building Bridges to the Education System that Students and Teachers Deserve

ERIC Educational Resources Information Center

Daughtrey, Alesha

2010-01-01

In this report the TeacherSolutions Teacher Working Conditions team--a group of 14 accomplished teachers who work in mostly high-needs schools and districts, both urban and rural, draw on current research and Center for Teaching Quality case studies to identify essential, research-based principles that must undergird sustainable and effective…

Scholars Seek Better Ways to Track Impact Online

ERIC Educational Resources Information Center

Howard, Jennifer

2012-01-01

In academe, the game of how to win friends and influence people is serious business. Administrators and grant makers want proof that a researcher's work has life beyond the library or the lab. But the current system of measuring scholarly influence does not reflect the way many researchers work in an environment driven more and more by the social…

Caesy: A software tool for computer-aided engineering

NASA Technical Reports Server (NTRS)

Wette, Matt

1993-01-01

A new software tool, Caesy, is described. This tool provides a strongly typed programming environment for research in the development of algorithms and software for computer-aided control system design. A description of the user language and its implementation as they currently stand are presented along with a description of work in progress and areas of future work.

Electronic Learning Courses as a Means to Activate Students' Independent Work in Studying Physics

ERIC Educational Resources Information Center

Shurygin, Viktor Yurjevich; Krasnova, Lyubov Alekseevna

2016-01-01

Currently, there are special requirements to the system of higher education, focused not only on imparting knowledge to students, but also on the formation of the continuous need for independent self-education, self-creative approach to getting knowledge throughout their active life. In this regard, the role of students' independent work with its…

Summary from Working Group on Multiple Beams and Funneling

NASA Technical Reports Server (NTRS)

Wangler, T. P.

1985-01-01

The working group on Multiple Beams and Funneling discussed various topics related to multiple beams and funneling, including (1) design considerations for multiple-beam accelerators; (2) scaling of current, emittance, and brightness for multiple-beam systems; (3) funneling lines using either discrete components or a radiofrequency quadrupole (RFQ) funneling structure; and (4) alternatives to funneling.

Vahan Gevorgian | NREL

Science.gov Websites

currently working with Transmission and Grid Integration group focused on renewable energy impacts on transmission and interconnection issues and dynamic modeling of variable generation systems. He is involved in

Systems Modeling of a Hypothetical SSME Channel-Wall Nozzle

NASA Technical Reports Server (NTRS)

Greene, William D.; Thames, Mignon P.; Polsgrove, Robert H.

2003-01-01

A future upgrade to the Space Shuttle Main Engine (SSME) may be the replacement of the current regenerative cooled tube-wall nozzle with a nozzle using a regeneratively-cooled channel-wall design. The current tube-wall design represents the only major piece of SSME hardware that has not been dramatically updated throughout thc long history of the engine. There are a number of advantages to a channel-wall design including the promise of faster and lower cost fabrication and greater reliability in the field. The technical obstacles in the path of making this happen are many, particularly in the realms of metallurgy and manufacturing techniques. However, one technical area that can and should be addressed in the near term as part of the development of detailed component requirements is a systems type model of the fluid flow and heat transfer processes to which the new design will be exposed. This paper presents the results of an effort to develop a mathematical model of the internal flow for a generic channel-wall nozzle functioning as a direct replacement for the current tube-wall nozzle with a minimum of systems-level changes. Comparisons will be made to mathematical modeling results for the current tube-wall design and the results of various geometrical trade studies will be presented. It is the intent of this work to examine the feasibility of the concept of a direct replacement component with minimum systems-!eve impacts and to highlight potential areas of concern requiring further work in the future.

Realistic option for the Work Injury Rehabilitation System in China.

PubMed

Li, Zhong

2008-01-01

This paper aims to describe the current Work Injury Rehabilitation (WIR) System in China with its background, basic principles and the attempts to explore and build up different types of WIR system in different areas in China in accordance with the existing situation. Seven points taken as the focus of perfecting and building up new WIR have been presented: the study and formulation of an overall development plan for the WIR system in China, improving WIR policy, establishing a system of standards for WIR, improving the administration system for WIR, developing a WIR service system, strengthening the training of professional staff for WIR, conducting scientific study and international cooperation for WIR. These points may serve as guidelines for future development of the WIR system in China.

Investigations of current limiting properties of the MgB2 wires subjected to pulse overcurrents in the benchtop tester

NASA Astrophysics Data System (ADS)

Ye, Lin; Majoros, M.; Campbell, A. M.; Coombs, T.; Harrison, S.; Sargent, P.; Haslett, M.; Husband, M.

2007-04-01

A laboratory scale desktop test system including a cryogenic system, an AC pulse generation system and a real time data acquisition program in LabView/DAQmx, has been developed to evaluate the quench properties of MgB2 wires as an element in a superconducting fault current limiter under pulse overcurrents at 25 K in self-field conditions. The MgB2 samples started from a superconducting state and demonstrated good current limiting properties characterized by a fast transition to the normal state during the first half of the cycle and a continuously limiting effect in the subsequent cycles without burnouts. The experimental and numerical simulation results on the quench behaviour indicate the feasibility of using MgB2 for future superconducting fault current limiter (SFCL) applications. This work is supported by Rolls-Royce Plc and the UK Department of Trade & Industry (DTI).

Demonstrating the Viability and Affordability of Nuclear Surface Power Systems

NASA Technical Reports Server (NTRS)

Vandyke, Melissa K.

2006-01-01

A set of tasks have been identified to help demonstrate the viability, performance, and affordability of surface fission systems. Completion of these tasks will move surface fission systems closer to reality by demonstrating affordability and performance potential. Tasks include fabrication and test of a 19-pin section of a Surface Power Unit Demonstrator (SPUD); design, fabrication, and utilization of thermal simulators optimized for surface fission' applications; design, fabrication, and utilization of GPHS module thermal simulators; design, fabrication, and test of a fission surface power system shield; and work related to potential fission surface power fuel/clad systems. Work on the SPUD will feed directly into joint NASA MSFC/NASA GRC fabrication and test of a surface power plant Engineering Development Unit (EDU). The goal of the EDU will be to perform highly realistic thermal, structural, and electrical testing on an integrated fission surface power system. Fission thermal simulator work will help enable high fidelity non-nuclear testing of pumped NaK surface fission power systems. Radioisotope thermal simulator work will help enable design and development of higher power radioisotope systems (power ultimately limited by Pu-238 availability). Shield work is designed to assess the potential of using a water neutron shield on the surface of the moon. Fuels work is geared toward assessing the current potential of using fuels that have already flown in space.

Issues around radiological protection of the environment and its integration with protection of humans: promoting debate on the way forward.

PubMed

Brownless, G P

2007-12-01

This paper explores issues to consider around integrating direct, explicit protection of the environment into the current system of radiological protection, which is focused on the protection of humans. Many issues around environmental radiological protection have been discussed, and ready-to-use toolboxes have been constructed for assessing harm to non-human biota, but it is not clear how (or even if) these should be fitted into the current system of protection. Starting from the position that the current approach to protecting the environment (namely that it follows from adequately protecting humans) is generally effective, this paper considers how explicit radiological protection of the environment can be integrated with the current system, through developing a 'worked example' of how this could be done and highlighting issues peculiar to protection of the environment. The aim of the paper is to promote debate on this topic, with the ultimate aim of ensuring that any changes to the system are consensual and robust.

Assessment of the Use of Nanofluids in Spacecraft Active Thermal Control Systems

NASA Technical Reports Server (NTRS)

Ungar, Eugene K.; Erickson, Lisa R.

2011-01-01

The addition of metallic nanoparticles to a base heat transfer fluid can dramatically increase its thermal conductivity. These nanofluids have been shown to have advantages in some heat transport systems. Their enhanced properties can allow lower system volumetric flow rates and can reduce the required pumping power. Nanofluids have been suggested for use as working fluids for spacecraft Active Thermal Control Systems (ATCSs). However, there are no studies showing the end-to-end effect of nanofluids on the design and performance of spacecraft ATCSs. In the present work, a parametric study is performed to assess the use of nanofluids in a spacecraft ATCSs. The design parameters of the current Orion capsule and the tabulated thermophysical properties of nanofluids are used to assess the possible benefits of nanofluids and how their incorporation affects the overall design of a spacecraft ATCS. The study shows that the unique system and component-level design parameters of spacecraft ATCSs render them best suited for pure working fluids. The addition of nanoparticles to typical spacecraft thermal control working fluids actually results in an increase in the system mass and required pumping power.

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

PubMed

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Non-cooperative Brownian donkeys: A solvable 1D model

NASA Astrophysics Data System (ADS)

Jiménez de Cisneros, B.; Reimann, P.; Parrondo, J. M. R.

2003-12-01

A paradigmatic 1D model for Brownian motion in a spatially symmetric, periodic system is tackled analytically. Upon application of an external static force F the system's response is an average current which is positive for F < 0 and negative for F > 0 (absolute negative mobility). Under suitable conditions, the system approaches 100% efficiency when working against the external force F.

Strengthening health professions regulation in Cambodia: a rapid assessment.

PubMed

Clarke, David; Duke, Jan; Wuliji, Tana; Smith, Alyson; Phuong, Keat; San, Un

2016-03-10

This paper describes a rapid assessment of Cambodia's current system for regulating its health professions. The assessment forms part of a co-design process to set strategic priorities for strengthening health profession regulation to improve the quality and safety of health services. A health system approach for strengthening health professions' regulation is underway and aims to support the Government of Cambodia's plans for scaling up its health workforce, improving health services' safety and quality, and meeting its Association of South East Asian Nations (ASEAN) obligations to facilitate trade in health care services. The assessment used a mixed methods approach including: A desktop review of key laws, plans, reports and other documents relating to the regulation of the health professions in Cambodia (medicine, dentistry, midwifery, nursing and pharmacy); Key informant interviews with stakeholders in Cambodia (The term "stakeholders" refers to government officials, people working on health professional regulation, people working for the various health worker training institutions and health workers at the national and provincial level); Surveys and questionnaires to assess Cambodian stakeholder knowledge of regulation; Self-assessments by members of the five Cambodian regulatory councils regarding key capacities and activities of high-performing regulatory bodies; and A rapid literature review to identify: The key functions of health professional regulation; The key issues affecting the Cambodian health sector (including relevant developments in the wider ASEAN region); and "Smart" health profession regulation practices of possible relevance to Cambodia. We found that the current regulatory system only partially meets Cambodia's needs. A number of key regulatory functions are being performed, but overall, the current system was not designed with Cambodia's specific needs in mind. The existing system is also overly complex, with considerable duplication and overlap between governance and regulatory arrangements for the five regulated professions. There is considerable scope for reform to the current regulatory system to better align the system to Cambodia's: Current needs and circumstances; Health system strategic priorities; and International obligations. Cambodia is also well placed to base its reformed regulatory system on recent developments of "smart regulatory practices" for health professionals.

Research on Intelligent Control System of DC SQUID Magnetometer Parameters for Multi-channel System

NASA Astrophysics Data System (ADS)

Chen, Hua; Yang, Kang; Lu, Li; Kong, Xiangyan; Wang, Hai; Wu, Jun; Wang, Yongliang

2018-07-01

In a multi-channel SQUID measurement system, adjusting device parameters to optimal condition for all channels is time-consuming. In this paper, an intelligent control system is presented to determine the optimal working point of devices which is automatic and more efficient comparing to the manual one. An optimal working point searching algorithm is introduced as the core component of the control system. In this algorithm, the bias voltage V_bias is step scanned to obtain the maximal value of the peak-to-peak current value I_pp of the SQUID magnetometer modulation curve. We choose this point as the optimal one. Using the above control system, more than 30 weakly damped SQUID magnetometers with area of 5 × 5 mm^2 or 10 × 10 mm^2 are adjusted and a 36-channel magnetocardiography system perfectly worked in a magnetically shielded room. The average white flux noise is 15 {μ Φ }_0/Hz^{1/2}.

Research on Intelligent Control System of DC SQUID Magnetometer Parameters for Multi-channel System

NASA Astrophysics Data System (ADS)

Chen, Hua; Yang, Kang; Lu, Li; Kong, Xiangyan; Wang, Hai; Wu, Jun; Wang, Yongliang

2018-03-01

In a multi-channel SQUID measurement system, adjusting device parameters to optimal condition for all channels is time-consuming. In this paper, an intelligent control system is presented to determine the optimal working point of devices which is automatic and more efficient comparing to the manual one. An optimal working point searching algorithm is introduced as the core component of the control system. In this algorithm, the bias voltage V_bias is step scanned to obtain the maximal value of the peak-to-peak current value I_pp of the SQUID magnetometer modulation curve. We choose this point as the optimal one. Using the above control system, more than 30 weakly damped SQUID magnetometers with area of 5 × 5 mm^2 or 10 × 10 mm^2 are adjusted and a 36-channel magnetocardiography system perfectly worked in a magnetically shielded room. The average white flux noise is 15 μΦ_0/Hz^{1/2}.

Patient Safety Incident Reporting: Current Trends and Gaps Within the Canadian Health System.

PubMed

Boucaud, Sarah; Dorschner, Danielle

2016-01-01

Patient safety incidents are a national-level phenomenon, requiring a pan-Canadian approach to ensure that incidents are reported and lessons are learned and broadly disseminated. This work explores the variation in current provincial and local approaches to reporting through a literature review. Trends are consolidated and recommendations are offered to foster better alignment of existing systems. These include adopting a common terminology, defining the patient role in reporting, increasing system users' perception of safety and further investigating the areas of home and community care in ensuring standard approaches at the local level. These steps can promote alignment, reducing barriers to a future pan-Canadian reporting and learning system.

Approaches to Neural Tissue Engineering Using Scaffolds for Drug Delivery

PubMed Central

Willerth, Stephanie M.; Sakiyama-Elbert, Shelly E.

2007-01-01

This review seeks to give an overview of the current approaches to drug delivery from scaffolds for neural tissue engineering applications. The challenges presented by attempting to replicate the three types of nervous tissue (brain, spinal cord, and peripheral nerve) are summarized. Potential scaffold materials (both synthetic and natural) and target drugs are discussed with the benefits and drawbacks given. Finally, common methods of drug delivery, including degradable/diffusion-based delivery systems, affinity-based delivery systems, immobilized drug delivery systems, and electrically controlled drug delivery systems, are examined and critiqued. Based on the current body of work, suggestions for future directions of research in the field of neural tissue engineering are presented. PMID:17482308

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

Halo current diagnostic system of experimental advanced superconducting tokamak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, D. L.; Shen, B.; Sun, Y.

2015-10-15

The design, calibration, and installation of disruption halo current sensors for the Experimental Advanced Superconducting Tokamak are described in this article. All the sensors are Rogowski coils that surround conducting structures, and all the signals are analog integrated. Coils with two different cross-section sizes have been fabricated, and their mutual inductances are calibrated. Sensors have been installed to measure halo currents in several different parts of both the upper divertor (tungsten) and lower divertor (graphite) at several toroidal locations. Initial measurements from disruptions show that the halo current diagnostics are working well.

APPLYING DATA MINING APPROACHES TO FURTHER UNDERSTANDING CHEMICAL EFFECTS ON BIOLOGICAL SYSTEMS.

EPA Science Inventory

Correlations of bioassays and toxicity cannot be assessed at the compound level with the current toxicity database. Further work is planned for gaining molecular level knoweldge from these experiments.

Subminiature eddy current transducers for studying boride coatings

NASA Astrophysics Data System (ADS)

Dmitriev, S. F.; Ishkov, A. V.; Malikov, V. N.; Sagalakov, A. M.

2016-07-01

Strengthening of parts and units of machines, increased reliability and longer service life is an important task of modern mechanical engineering. The main objects of study in the work were selected steel 65G and 50HGA, wear-resistant boride coatings ternary system Fe-B-Fe n B which were investigated by scanning electron microscopy and eddy-current nondestructive methods.

Using Coaching as a Professional Development Modality to Train Teachers in the Use of Evidence-Based Practices for Students with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Hollins, Samantha Marsh

2013-01-01

Professional development for teachers currently working in the classroom is an important focus of educational programs and school systems. Continuous professional development is especially important for special education teachers to maintain current information related to strategies and supports that are effective in educating students with…

School Evaluation: Current Practices in OECD Countries and a Literature Review. OECD Education Working Papers, No. 42

ERIC Educational Resources Information Center

Faubert, Violaine

2009-01-01

This paper examines the current academic and policy literatures concerning school evaluation in primary and secondary education within the OECD countries. First, it provides a typology of the existing systems of school evaluation across the OECD. It encompasses the diverse criteria and instruments commonly used to carry out schools evaluation, as…

Preventing type 2 diabetes: Changing the food industry.

PubMed

Popkin, Barry M; Kenan, W R

2016-06-01

Improving our global diet by working with the food industry is a fairly complex task. Previously the global food manufacturing companies and governments were the major players. However, matters have shifted rapidly so that food retailers, food manufacturers, the restaurant-food service sector, and agribusinesses are now the major players. The current modern system of packaged processed food has now penetrated the globe-rich and poor, rural and urban are all in reach of this food system. Consequently, working with this complex sector when possible and an array of governmental regulatory large-scale options to improve our diet have increased in importance. Taxation of unhealthy foods and beverages, marketing controls, and front of the package labeling are the primary current options. Evaluations of the impacts of both public and industry initiatives are needed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of a current collection loss management system for SDI homopolar power supplies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, D.W.

1989-01-01

High speed, high power density current collection systems have been identified as an enabling technology required to construct homopolar power supplies to meet SDI missions. This work is part of a three-year effort directed towards the analysis, experimental verification, and prototype construction of a current collection system designed to operate continuously at 2 kA/cm{sup 2}, at a rubbing speed of 200 m/s, and with acceptable losses in a space environment. To data, no system has achieved these conditions simultaneously. This is the annual report covering the second year period of performance on DOE contract DE-AC03-86SF16518. Major areas covered include design,more » construction and operation of a cryogenically cooled brush test rig, design and construction of a high speed brush test rig, optimization study for homopolar machines, loss analysis of the current collection system, and an application study which defines the air-core homopolar construction necessary to achieve the goal of 80--90 kW/kg generator power density. 17 figs., 2 tabs.« less

RUBE: an XML-based architecture for 3D process modeling and model fusion

NASA Astrophysics Data System (ADS)

Fishwick, Paul A.

2002-07-01

Information fusion is a critical problem for science and engineering. There is a need to fuse information content specified as either data or model. We frame our work in terms of fusing dynamic and geometric models, to create an immersive environment where these models can be juxtaposed in 3D, within the same interface. The method by which this is accomplished fits well into other eXtensible Markup Language (XML) approaches to fusion in general. The task of modeling lies at the heart of the human-computer interface, joining the human to the system under study through a variety of sensory modalities. I overview modeling as a key concern for the Defense Department and the Air Force, and then follow with a discussion of past, current, and future work. Past work began with a package with C and has progressed, in current work, to an implementation in XML. Our current work is defined within the RUBE architecture, which is detailed in subsequent papers devoted to key components. We have built RUBE as a next generation modeling framework using our prior software, with research opportunities in immersive 3D and tangible user interfaces.

Spin-polarized currents generated by magnetic Fe atomic chains.

PubMed

Lin, Zheng-Zhe; Chen, Xi

2014-06-13

Fe-based devices are widely used in spintronics because of high spin-polarization and magnetism. In this work, freestanding Fe atomic chains, the thinnest wires, were used to generate spin-polarized currents due to the spin-polarized energy bands. By ab initio calculations, the zigzag structure was found to be more stable than the wide-angle zigzag structure and had a higher ratio of spin-up and spin-down currents. By our theoretical prediction, Fe atomic chains have a sufficiently long thermal lifetime only at T ≦̸ 150 K, while C atomic chains are very stable even at T = 1000 K. This means that the spintronic devices based on Fe chains could work only at low temperatures. A system constructed by a short Fe chain sandwiched between two graphene electrodes could be used as a spin-polarized current generator, while a C chain could not be used in this way. The present work may be instructive and meaningful to further practical applications based on recent technical developments on the preparation of metal atomic chains (Proc. Natl. Acad. Sci. USA 107 9055 (2010)).

Progress Report on the Airborne Metadata and Time Series Working Groups of the 2016 ESDSWG

NASA Astrophysics Data System (ADS)

Evans, K. D.; Northup, E. A.; Chen, G.; Conover, H.; Ames, D. P.; Teng, W. L.; Olding, S. W.; Krotkov, N. A.

2016-12-01

NASA's Earth Science Data Systems Working Groups (ESDSWG) was created over 10 years ago. The role of the ESDSWG is to make recommendations relevant to NASA's Earth science data systems from users' experiences. Each group works independently focusing on a unique topic. Participation in ESDSWG groups comes from a variety of NASA-funded science and technology projects, including MEaSUREs and ROSS. Participants include NASA information technology experts, affiliated contractor staff and other interested community members from academia and industry. Recommendations from the ESDSWG groups will enhance NASA's efforts to develop long term data products. The Airborne Metadata Working Group is evaluating the suitability of the current Common Metadata Repository (CMR) and Unified Metadata Model (UMM) for airborne data sets and to develop new recommendations as necessary. The overarching goal is to enhance the usability, interoperability, discovery and distribution of airborne observational data sets. This will be done by assessing the suitability (gaps) of the current UMM model for airborne data using lessons learned from current and past field campaigns, listening to user needs and community recommendations and assessing the suitability of ISO metadata and other standards to fill the gaps. The Time Series Working Group (TSWG) is a continuation of the 2015 Time Series/WaterML2 Working Group. The TSWG is using a case study-driven approach to test the new Open Geospatial Consortium (OGC) TimeseriesML standard to determine any deficiencies with respect to its ability to fully describe and encode NASA earth observation-derived time series data. To do this, the time series working group is engaging with the OGC TimeseriesML Standards Working Group (SWG) regarding unsatisfied needs and possible solutions. The effort will end with the drafting of an OGC Engineering Report based on the use cases and interactions with the OGC TimeseriesML SWG. Progress towards finalizing recommendations will be presented at the meeting.

The AFIT of Today is the Air Force of Tomorrow

DTIC Science & Technology

2012-05-11

Engineering • Operations Research • Space Systems • Systems Engineering • Air Mobility • Combating Weapons of Mass Destruction • Cost Analysis • Cyber...Fight - Win Graduate Certificate Programs • Systems Engineering • Space Systems • Advanced Geospatial Intelligence • Combating Weapons of Mass ...over five years • Critical enabler for SSA: extending the satellite catalog to small objects Current Works: • Converting satellite catalog to KAM Tori

The evolution of the Japanese medical education system: a historical perspective.

PubMed

Kuwabara, Norimitsu; Yamashita, Miu; Yee, Keolamau; Kurahara, David

2015-03-01

The Japanese Medical Education system has been influenced by political events throughout the country's history. From long periods of isolation from the western world to the effect of world wars, Japan's training system for physicians has had to adapt in many ways and will continue to change. The Japanese medical education system was recently compared to the "Galapagos Islands" for its unusual and singular evolution, in a speech by visiting professor Dr. Gordon L. Noel at the University of Tokyo International Research center.1 Japanese medical schools are currently working to increase their students' clinical hours or else these students may not be able to train in the United States for residencies. Knowing the history of the Japanese Medical education system is paramount to understanding the current system in place today. Studying the historical foundation of this system will also provide insight on how the system must change in order to produce better clinicians. This article provides a glimpse into the medical system of another nation that may encourage needed reflection on the state of current healthcare training in the United States.

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

PubMed

Andersen, Simone Nyholm; Broberg, Ole

2015-11-01

Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Security Analysis of DTN Architecture and Bundle Protocol Specification for Space-Based Networks

NASA Technical Reports Server (NTRS)

Ivancic, William D.

2009-01-01

A Delay-Tolerant Network (DTN) Architecture (Request for Comment, RFC-4838) and Bundle Protocol Specification, RFC-5050, have been proposed for space and terrestrial networks. Additional security specifications have been provided via the Bundle Security Specification (currently a work in progress as an Internet Research Task Force internet-draft) and, for link-layer protocols applicable to Space networks, the Licklider Transport Protocol Security Extensions. This document provides a security analysis of the current DTN RFCs and proposed security related internet drafts with a focus on space-based communication networks, which is a rather restricted subset of DTN networks. Note, the original focus and motivation of DTN work was for the Interplanetary Internet . This document does not address general store-and-forward network overlays, just the current work being done by the Internet Research Task Force (IRTF) and the Consultative Committee for Space Data Systems (CCSDS) Space Internetworking Services Area (SIS) - DTN working group under the DTN and Bundle umbrellas. However, much of the analysis is relevant to general store-and-forward overlays.

Cryogenic gear technology for an orbital transfer vehicle engine and tester design

NASA Technical Reports Server (NTRS)

Calandra, M.; Duncan, G.

1986-01-01

Technology available for gears used in advanced Orbital Transfer Vehicle rocket engines and the design of a cryogenic adapted tester used for evaluating advanced gears are presented. The only high-speed, unlubricated gears currently in cryogenic service are used in the RL10 rocket engine turbomachinery. Advanced rocket engine gear systems experience operational load conditions and rotational speed that are beyond current experience levels. The work under this task consisted of a technology assessment and requirements definition followed by design of a self-contained portable cryogenic adapted gear test rig system.

Field emission study of carbon nanostructures

NASA Astrophysics Data System (ADS)

Zhao, Xin

Recently, carbon nanosheets (CNS), a novel nanostructure, were developed in our laboratory as a field emission source for high emission current. To characterize, understand and improve the field emission properties of CNS, a ultra-high vacuum surface analysis system was customized to conduct relevant experimental research in four distinct areas. The system includes Auger electron spectroscopy (AES), field emission energy spectroscopy (FEES), field emission I-V testing, and thermal desorption spectroscopy (TDS). Firstly, commercial Mo single tips were studied to calibrate the customized system. AES and FEES experiments indicate that a pyramidal nanotip of Ca and O elements formed on the Mo tip surface by field induced surface diffusion. Secondly, field emission I-V testing on CNS indicates that the field emission properties of pristine nanosheets are impacted by adsorbates. For instance, in pristine samples, field emission sources can be built up instantaneously and be characterized by prominent noise levels and significant current variations. However, when CNS are processed via conditioning (run at high current), their emission properties are greatly improved and stabilized. Furthermore, only H2 desorbed from the conditioned CNS, which indicates that only H adsorbates affect emission. Thirdly, the TDS study on nanosheets revealed that the predominant locations of H residing in CNS are sp2 hybridized C on surface and bulk. Fourthly, a fabricating process was developed to coat low work function ZrC on nanosheets for field emission enhancement. The carbide triple-peak in the AES spectra indicated that Zr carbide formed, but oxygen was not completely removed. The Zr(CxOy) coating was dispersed as nanobeads on the CNS surface. Although the work function was reduced, the coated CNS emission properties were not improved due to an increased beta factor. Further analysis suggest that for low emission current (<1 uA), the H adsorbates affect emission by altering the work function. In high emission current (>10 uA), thermal, ionic or electronic transition effects may occur, which differently affect the field emission process.

CICADA, CCD and Instrument Control Software

NASA Astrophysics Data System (ADS)

Young, Peter J.; Brooks, Mick; Meatheringham, Stephen J.; Roberts, William H.

Computerised Instrument Control and Data Acquisition (CICADA) is a software system for control of telescope instruments in a distributed computing environment. It is designed using object-oriented techniques and built with standard computing tools such as RPC, SysV IPC, Posix threads, Tcl, and GUI builders. The system is readily extensible to new instruments and currently supports the Astromed 3200 CCD controller and MSSSO's new tip-tilt system. Work is currently underway to provide support for the SDSU CCD controller and MSSSO's Double Beam Spectrograph. A core set of processes handle common communication and control tasks, while specific instruments are ``bolted'' on using C++ inheritance techniques.

Diagnosing Breast Cancer with Microwave Technology: remaining challenges and potential solutions with machine learning.

PubMed

Oliveira, Bárbara L; Godinho, Daniela; O'Halloran, Martin; Glavin, Martin; Jones, Edward; Conceição, Raquel C

2018-05-19

Currently, breast cancer often requires invasive biopsies for diagnosis, motivating researchers to design and develop non-invasive and automated diagnosis systems. Recent microwave breast imaging studies have shown how backscattered signals carry relevant information about the shape of a tumour, and tumour shape is often used with current imaging modalities to assess malignancy. This paper presents a comprehensive analysis of microwave breast diagnosis systems which use machine learning to learn characteristics of benign and malignant tumours. The state-of-the-art, the main challenges still to overcome and potential solutions are outlined. Specifically, this work investigates the benefit of signal pre-processing on diagnostic performance, and proposes a new set of extracted features that capture the tumour shape information embedded in a signal. This work also investigates if a relationship exists between the antenna topology in a microwave system and diagnostic performance. Finally, a careful machine learning validation methodology is implemented to guarantee the robustness of the results and the accuracy of performance evaluation.

Evaluation of Supercapacitors Effects on Hybrid Energy Systems for Automotive

NASA Astrophysics Data System (ADS)

Lungoci, Carmen; Helerea, Elena

This work aims at evaluating the effects of the supercapacitors presence in hybrid energy systems used in automotive. The design and the electrical schema of a hybrid energy system that contains batteries and supercapacitors and propel a synchronous motor are purposed. The motor operating regime is described, detailing the drive evolution of the cycle speed imposed. In these conditions, to model the systems behavior, simulations developed in Matlab/Simulink environment are carried out. Two energies management strategies for the ensemble energy system-motor are implemented. Simulations are done and the energy management is discussed, making the comparative analyses. Applying a current control strategy on the supercapacitors, under two working conditions, functional diagrams are showed and compared. The results obtained highlight the advantages of the supercapacitors.

Human-Automation Integration: Principle and Method for Design and Evaluation

NASA Technical Reports Server (NTRS)

Billman, Dorrit; Feary, Michael

2012-01-01

Future space missions will increasingly depend on integration of complex engineered systems with their human operators. It is important to ensure that the systems that are designed and developed do a good job of supporting the needs of the work domain. Our research investigates methods for needs analysis. We included analysis of work products (plans for regulation of the space station) as well as work processes (tasks using current software), in a case study of Attitude Determination and Control Officers (ADCO) planning work. This allows comparing how well different designs match the structure of the work to be supported. Redesigned planning software that better matches the structure of work was developed and experimentally assessed. The new prototype enabled substantially faster and more accurate performance in plan revision tasks. This success suggests the approach to needs assessment and use in design and evaluation is promising, and merits investigatation in future research.

Systems Science: A Good Investment for the Public's Health

ERIC Educational Resources Information Center

Mabry, Patricia L.; Kaplan, Robert M.

2013-01-01

This supplement of "Health Education & Behavior" showcases the current state of the field of systems science applications in health promotion and public health. Behind this work lies a steady stream of public dollars at the federal level. This perspective details nearly a decade of investment by the National Institutes of…

Dale Jenne | NREL

Science.gov Websites

and focuses on thermal system and economic analysis for low temperature and co-produced hydrothermal mechanical systems and economic analysis has led to his most recent work with the Marine and Hydrokinetic (MHK) team, where he is one of the lead techno-economic analysts for wave and current energy. His areas

Evaluation of an automated hardwood lumber grading system

Treesearch

D. Earl Kline; Philip A. Araman; Chris Surak

2001-01-01

Over the last 10 years, scientists at the Thomas M. Brooks Forest Products Center, the Bradley Department of Electrical Engineering, and the USDA Forest Service have been working on lumber scanning systems that can accurately locate and identify defects in hardwood lumber. Current R&D efforts are targeted toward developing automated lumber grading technologies....

Models and Systems for Structurization of Knowledge in Training

ERIC Educational Resources Information Center

Pelin, Nicolae; Pelin, Serghei

2007-01-01

In this work the problems of the automated structurization and activation of the knowledge, saved and used by mankind, during the organization and training, and also that knowledge which are generated by experts (including teachers) in the current activity, are analyzed. The purpose--the further perfection of methods and systems of the automated…

Electrical Systems. FOS: Fundamentals of Service. Fifth Edition.

ERIC Educational Resources Information Center

John Deere Co., Moline, IL.

This manual, which is part of a series on agricultural and industrial machinery, deals with electrical systems. Special attention is paid to electricity as it is commonly used on mobile machines. The following topics are covered in the individual chapters: electricity and how it works (current, voltage, and resistance; types of circuits;…

Solitons of shallow-water models from energy-dependent spectral problems

NASA Astrophysics Data System (ADS)

Haberlin, Jack; Lyons, Tony

2018-01-01

The current work investigates the soliton solutions of the Kaup-Boussinesq equation using the inverse scattering transform method. We outline the construction of the Riemann-Hilbert problem for a pair of energy-dependent spectral problems for the system, which we then use to construct the solution of this hydrodynamic system.

A Study of Information Systems Programs Accredited by ABET in Relation to IS 2010

ERIC Educational Resources Information Center

Feinstein, David; Longenecker, Herbert E., Jr.; Shrestha, Dina

2014-01-01

This article examines the relationship between ABET CAC standards for undergraduate programs of information systems and IS 2010 curriculum specifications. We have reviewed current institution described course work that identifies course structures from accredited IS programs. The accredited programs all matched the expectations expressed in ABET…

75 FR 21250 - Privacy Act of 1974; Systems of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... information of the current tenants of NSA/CSS facilities; to create and track the status of visit requests and... facility; to track inside the NSA/CSS facility authorized NSA/CSS employee and visitor badges as they are used to pass through automated turnstile system, access office suites and other work areas; to track...

Improving the Child Care Delivery System in Minneapolis.

ERIC Educational Resources Information Center

Stokesbary, Daryl; And Others

The purpose of this report by the Minneapolis Interagency Work Group is to define reasons for day care demand, examine the adequacy of local service delivery patterns, analyze current trends and problems in the system, and make preliminary recommendations. The first section of the report discusses data concerning national trends in child care…

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 11: PEP, cost, schedules, and work breakdown structure dictionary

NASA Technical Reports Server (NTRS)

1979-01-01

Cost scheduling and funding data are presented for the reference design of the power extension package. Major schedule milestones are correlated with current Spacelab flight dates. Funding distributions provide for minimum expenditure during the first year of the project.

Stepping Up: Improving Progression in English and Math from High School to College. Student Transcript-Enhanced Placement Study. Research Brief

ERIC Educational Resources Information Center

Willett, Terrence; Karandjeff, Kelley

2014-01-01

How do we determine if incoming students are ready for college-level work? California's community college system is currently working to address this complex question in a more nuanced, comprehensive, and equitable way. This research brief offers insights that can inform these efforts resulting from the Student Transcript-Enhanced Placement Study…

A Missing Link in Suggestibility Research: What Is Known About the Behavior of Field Interviewers in Unstructured Interviews With Young Children?

ERIC Educational Resources Information Center

Gilstrap, Livia L.

2004-01-01

Despite suggestibility researchers' focus on adult behaviors that distort children's reports, whether behaviors examined in experimental work are used in the field is unknown. The current study presents a mutually exclusive and exhaustive hierarchical coding system that reflects interview questioning behaviors of concern in experimental work. The…

Harmonic voltage excess problem test and analysis in UHV and EHV grid particular operation mode

NASA Astrophysics Data System (ADS)

Lv, Zhenhua; Shi, Mingming; Fei, Juntao

2018-02-01

The test and analysis of the power quality of some 1000kV UHV transmission lines and 500kV EHV transmission lines is carried out. It is found that there is harmonic voltage excess problems when the power supply of the UHV and EHV voltage line is single-ended or single-loop, the problem basically disappeared after the operation mode change, different operating conditions, the harmonic current has not been greatly affected, indicating that the harmonic voltage changes mainly caused by the system harmonic impedance. With the analysis of MATLAB Simulink system model, it can be seen that there are specific harmonic voltage excess in the system under the specific operating mode, which results in serious distortion of the specific harmonic voltage. Since such phenomena are found in 500kV and 1000kV systems, it is suggested that the test evaluation work should be done under the typical mode of operation in 500kV, 1000kV Planning and construction process to prevent the occurrence of serious distortion and the regional harmonic current monitoring and suppression work should be done.

The Multispectral Imaging Science Working Group. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Cox, S. C. (Editor)

1982-01-01

Results of the deliberations of the six multispectral imaging science working groups (Botany, Geography, Geology, Hydrology, Imaging Science and Information Science) are summarized. Consideration was given to documenting the current state of knowledge in terrestrial remote sensing without the constraints of preconceived concepts such as possible band widths, number of bands, and radiometric or spatial resolutions of present or future systems. The findings of each working group included a discussion of desired capabilities and critical developmental issues.

Modelling fatigue and the use of fatigue models in work settings.

PubMed

Dawson, Drew; Ian Noy, Y; Härmä, Mikko; Akerstedt, Torbjorn; Belenky, Gregory

2011-03-01

In recent years, theoretical models of the sleep and circadian system developed in laboratory settings have been adapted to predict fatigue and, by inference, performance. This is typically done using the timing of prior sleep and waking or working hours as the primary input and the time course of the predicted variables as the primary output. The aim of these models is to provide employers, unions and regulators with quantitative information on the likely average level of fatigue, or risk, associated with a given pattern of work and sleep with the goal of better managing the risk of fatigue-related errors and accidents/incidents. The first part of this review summarises the variables known to influence workplace fatigue and draws attention to the considerable variability attributable to individual and task variables not included in current models. The second part reviews the current fatigue models described in the scientific and technical literature and classifies them according to whether they predict fatigue directly by using the timing of prior sleep and wake (one-step models) or indirectly by using work schedules to infer an average sleep-wake pattern that is then used to predict fatigue (two-step models). The third part of the review looks at the current use of fatigue models in field settings by organizations and regulators. Given their limitations it is suggested that the current generation of models may be appropriate for use as one element in a fatigue risk management system. The final section of the review looks at the future of these models and recommends a standardised approach for their use as an element of the 'defenses-in-depth' approach to fatigue risk management. Copyright © 2010 Elsevier Ltd. All rights reserved.

Robonaut: a robot designed to work with humans in space

NASA Technical Reports Server (NTRS)

Bluethmann, William; Ambrose, Robert; Diftler, Myron; Askew, Scott; Huber, Eric; Goza, Michael; Rehnmark, Fredrik; Lovchik, Chris; Magruder, Darby

2003-01-01

The Robotics Technology Branch at the NASA Johnson Space Center is developing robotic systems to assist astronauts in space. One such system, Robonaut, is a humanoid robot with the dexterity approaching that of a suited astronaut. Robonaut currently has two dexterous arms and hands, a three degree-of-freedom articulating waist, and a two degree-of-freedom neck used as a camera and sensor platform. In contrast to other space manipulator systems, Robonaut is designed to work within existing corridors and use the same tools as space walking astronauts. Robonaut is envisioned as working with astronauts, both autonomously and by teleoperation, performing a variety of tasks including, routine maintenance, setting up and breaking down worksites, assisting crew members while outside of spacecraft, and serving in a rapid response capacity.

Robonaut: a robot designed to work with humans in space.

PubMed

Bluethmann, William; Ambrose, Robert; Diftler, Myron; Askew, Scott; Huber, Eric; Goza, Michael; Rehnmark, Fredrik; Lovchik, Chris; Magruder, Darby

2003-01-01

The Robotics Technology Branch at the NASA Johnson Space Center is developing robotic systems to assist astronauts in space. One such system, Robonaut, is a humanoid robot with the dexterity approaching that of a suited astronaut. Robonaut currently has two dexterous arms and hands, a three degree-of-freedom articulating waist, and a two degree-of-freedom neck used as a camera and sensor platform. In contrast to other space manipulator systems, Robonaut is designed to work within existing corridors and use the same tools as space walking astronauts. Robonaut is envisioned as working with astronauts, both autonomously and by teleoperation, performing a variety of tasks including, routine maintenance, setting up and breaking down worksites, assisting crew members while outside of spacecraft, and serving in a rapid response capacity.

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 6: Environmental analysis

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

The results of the analysis of the external environment of the FBI Fingerprint Identification Division are presented. Possible trends in the future environment of the Division that may have an effect on the work load were projected to determine if future work load will lie within the capability range of the proposed new system, AIDS 3. Two working models of the environment were developed, the internal and external model, and from these scenarios the projection of possible future work load volume and mixture was developed. Possible drivers of work load change were identified and assessed for upper and lower bounds of effects. Data used for the study were derived from historical information, analysis of the current situation and from interviews with various agencies who are users of or stakeholders in the present system.

The Medical Gopher — A Microcomputer Based Physician Work Station

PubMed Central

McDonald, Clement J.

1984-01-01

We've developed a microcomputer medical work station intended to reduce the physician's “gopher” work of fetching, reviewing, organizing and writing that consumes his day. The system requires extensive physician interaction; so we have developed a fast and consistent menu-oriented user interface. It provides facilities for entering prescriptions, orders, problems and other medical record information and for generating flowsheets, executing reminder rules, providing ad hoc retrievals and reporting facts about drugs, tests and differential diagnoses. Each work station is connected to a central server (currently a VAX 117/80) in a network configuration, but carries all of its own programs, tables and medical records for a few hundred patients, locally. This system is tested but not yet tried. Questions remain about physician's acceptance and the true usefullness of such a work station.

Assessing United States Patient and Dermatologist Experiences with Severe Chronic Hand Eczema

PubMed Central

Baranowski, Eileen; Zelt, Susan; Reynolds, Maria; Sherrill, Beth

2015-01-01

Objective: Patients with severe chronic hand eczema often have persistent symptoms that interfere with daily activities, social functioning, and employment. Many patients are refractory to topical corticosteroids. This survey-based study was performed to characterize treatment experiences, impact on productivity, and quality of life of patients with severe chronic hand eczema; understand dermatologists’ severe chronic hand eczema treatment patterns. Design: A web-based survey in the United States queried pre-identified patients with severe chronic hand eczema regarding symptoms, treatment history, quality of life, work productivity, treatment satisfaction, and healthcare utilization. In a separate survey, dermatologists were asked about treatment patterns and satisfaction with currently available therapies. Results: The most commonly reported symptoms currently experienced by patients (n=163) were dryness/flaking (81%), itchiness (75%), and cracking/tearing of the skin (71%). Over the last three months, 84 percent of patients with severe chronic hand eczema self-reported using topical steroids, and 30 percent used systemic corticosteroids or retinoids. Approximately 30 percent reported impairment while working and productivity loss. Patient quality of life was negatively impacted. Dermatologists (n=125) reported most often treating severe chronic hand eczema with topical corticosteroids (99%), followed by topical immunomodulators (71%) and systemic treatments (70%). Only two percent were very satisfied with currently available products. Conclusion: Patients with severe chronic hand eczema experience symptoms that negatively impact work productivity and quality of life. Few dermatologists are very satisfied with currently available severe chronic hand eczema treatment options. PMID:26705436

[Robotics].

PubMed

Bier, J

2000-05-01

Content of this paper is the current state of the art of robots in surgery and the ongoing work on the field of surgical robotics at the Clinic for Maxillofacial Surgery at the Charité. Robots in surgery allows the surgeon to transform the accuracy of the imaging systems directly during the intervention and to plan an intervention beforehand. In this paper firstly the state of the art is described. Subsequently the scientific work at the clinic is described in detail. The paper closes with a outlook for future applications of robotics systems in maxillofacial surgery.

Analysis of Wind Turbine Simulation Models: Assessment of Simplified versus Complete Methodologies: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honrubia-Escribano, A.; Jimenez-Buendia, F.; Molina-Garcia, A.

This paper presents the current status of simplified wind turbine models used for power system stability analysis. This work is based on the ongoing work being developed in IEC 61400-27. This international standard, for which a technical committee was convened in October 2009, is focused on defining generic (also known as simplified) simulation models for both wind turbines and wind power plants. The results of the paper provide an improved understanding of the usability of generic models to conduct power system simulations.

A Data Analysis Expert System For Large Established Distributed Databases

NASA Astrophysics Data System (ADS)

Gnacek, Anne-Marie; An, Y. Kim; Ryan, J. Patrick

1987-05-01

The purpose of this work is to analyze the applicability of artificial intelligence techniques for developing a user-friendly, parallel interface to large isolated, incompatible NASA databases for the purpose of assisting the management decision process. To carry out this work, a survey was conducted to establish the data access requirements of several key NASA user groups. In addition, current NASA database access methods were evaluated. The results of this work are presented in the form of a design for a natural language database interface system, called the Deductively Augmented NASA Management Decision Support System (DANMDS). This design is feasible principally because of recently announced commercial hardware and software product developments which allow cross-vendor compatibility. The goal of the DANMDS system is commensurate with the central dilemma confronting most large companies and institutions in America, the retrieval of information from large, established, incompatible database systems. The DANMDS system implementation would represent a significant first step toward this problem's resolution.

Mars Equipment Transport System

NASA Technical Reports Server (NTRS)

Sorrells, Cindy; Geiger, Michelle; Ohanlon, Sean; Pieloch, Stuart; Brogan, Nick

1993-01-01

Mechanical Engineering Senior Design Project 1 (ME4182) is a part of the NASA/University Advanced Design Program. Under this program, NASA allocates money and resources to students to be used in design work for a specified topic. The current topic is the exploration and colonization of Mars. The specific area in which we are to work is the transportation of the modules in which astronauts will live while on Mars. NASA is concerned about the weight of the module transferring system, as the shipping cost to Mars is quite expensive. NASA has specified that the weight of the system is to be minimized in order to reduce the shipping costs.

A Description of the Development, Capabilities, and Operational Status of the Test SLATE Data Acquisition System at the National Transonic Facility

NASA Technical Reports Server (NTRS)

Cramer, Christopher J.; Wright, James D.; Simmons, Scott A.; Bobbitt, Lynn E.; DeMoss, Joshua A.

2015-01-01

The paper will present a brief background of the previous data acquisition system at the National Transonic Facility (NTF) and the reasoning and goals behind the upgrade to the current Test SLATE (Test Software Laboratory and Automated Testing Environments) data acquisition system. The components, performance characteristics, and layout of the Test SLATE system within the NTF control room will be discussed. The development, testing, and integration of Test SLATE within NTF operations will be detailed. The operational capabilities of the system will be outlined including: test setup, instrumentation calibration, automatic test sequencer setup, data recording, communication between data and facility control systems, real time display monitoring, and data reduction. The current operational status of the Test SLATE system and its performance during recent NTF testing will be highlighted including high-speed, frame-by-frame data acquisition with conditional sampling post-processing applied. The paper concludes with current development work on the system including the capability for real-time conditional sampling during data acquisition and further efficiency enhancements to the wind tunnel testing process.

49 CFR 800.2 - Organization.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Board's information technology infrastructure, including computer systems, networks, databases, and... with information regarding the Safety Board's activities, programs and objectives; supplies the public, the transportation industry and the news media with current, accurate information concerning the work...

Neural networks modeling and control of dynamical systems

NASA Technical Reports Server (NTRS)

Soloway, Don

1992-01-01

The topics are presented in viewgraph form and include: an overview of research; first year research objectives (starting 5/91); background; current work; accomplishments from 5/91-9/91; and second year research objectives.

Development of a non-piston MR suspension rod for variable mass systems

NASA Astrophysics Data System (ADS)

Deng, Huaxia; Han, Guanghui; Zhang, Jin; Wang, Mingxian; Ma, Mengchao; Zhong, Xiang; Yu, Liandong

2018-06-01

The semi-active suspension systems for variable mass systems require long work stroke and variable damping, while the currently piston structure limits the work stroke for the magnetorheological (MR) dampers. The main work of this paper is to design a semi-active non-piston MR (NPMR) suspension rod for the reduction of the vibration of an automatic impeller washing machine, which is a typical variable mass system. The designed suspension rod locates in the suspension system that links the internal tub to the washing machine cabinet. The NPMR suspension rod includes a MR part and a air part. The MR part can provide low initial damping force and the unlimited work stroke compared with the piston MR damper. The hysteretic response tests and vibration performance evaluation with different loadings are conducted to verify the dynamic performance for the designed rod. The measured damping force of the MR part varies from 5 to 20 N. Studies of dehydration mode experiments of the washing machine indicate that its vibration acceleration with the NPMR suspension rods can reduce to half of the original passive ones in certain conditions.

The Role of Public Policy in Skills Development of Black Workers in the 21st Century. Upjohn Institute Staff Working Paper.

ERIC Educational Resources Information Center

Bartik, Timothy J.; Hollenbeck, Kevin

This paper discusses the role of public policy in the skills development system of the United States. It further examines the implications of that policy for the skill development and career progression of black workers. The paper describes the current "system" for skills development as a two-tiered system composed of (1) the "first…

2014 Salish Kootenai College Equipment Grant

DTIC Science & Technology

2016-09-14

using an appropriate purification machine. With this appropriate equipment, protein has been purified from a yeast expression system to explore the...purification machine. With this appropriate equipment, protein has been purified from a yeast expression system to explore the effects of that protein on...Scientific Progress We have successfully purified human YKL39 chilectin protein from a yeast expression system. We are currently working on purification

An RF amplifier for ICRF studies in the LAPD

NASA Astrophysics Data System (ADS)

Martin, M. J.; Pribyl, P.; Gekelman, W.; Lucky, Z.

2015-12-01

An RF amplifier system was designed and is under construction at the UCLA Basic Plasma Science Facility. The system is designed to output 200 kW peak RMS power at 1% duty cycle with a 1 Hz rep rate at frequencies of 2-6 MHz. This paper describes the RF amplifier system with preliminary benchmarks. Current design challenges and future work are discussed.

Adaptive Control of Four-Leg VSC Based DSTATCOM in Distribution System

NASA Astrophysics Data System (ADS)

Singh, Bhim; Arya, Sabha Raj

2014-01-01

This work discusses an experimental performance of a four-leg Distribution Static Compensator (DSTATCOM) using an adaptive filter based approach. It is used for estimation of reference supply currents through extracting the fundamental active power components of three-phase distorted load currents. This control algorithm is implemented on an assembled DSTATCOM for harmonics elimination, neutral current compensation and load balancing, under nonlinear loads. Experimental results are discussed, and it is noticed that DSTATCOM is effective solution to perform satisfactory performance under load dynamics.

Reproducibility in Natural Language Processing: A Case Study of Two R Libraries for Mining PubMed/MEDLINE.

PubMed

Cohen, K Bretonnel; Xia, Jingbo; Roeder, Christophe; Hunter, Lawrence E

2016-05-01

There is currently a crisis in science related to highly publicized failures to reproduce large numbers of published studies. The current work proposes, by way of case studies, a methodology for moving the study of reproducibility in computational work to a full stage beyond that of earlier work. Specifically, it presents a case study in attempting to reproduce the reports of two R libraries for doing text mining of the PubMed/MEDLINE repository of scientific publications. The main findings are that a rational paradigm for reproduction of natural language processing papers can be established; the advertised functionality was difficult, but not impossible, to reproduce; and reproducibility studies can produce additional insights into the functioning of the published system. Additionally, the work on reproducibility lead to the production of novel user-centered documentation that has been accessed 260 times since its publication-an average of once a day per library.

The Effects of Neutral Inertia on Ionospheric Currents in the High-Latitude Thermosphere Following a Geomagnetic Storm

NASA Technical Reports Server (NTRS)

Deng, W.; Killeen, T. L.; Burns, A. G.; Roble, R. G.; Slavin, J. A.; Wharton, L. E.

1993-01-01

Results of an experimental and theoretical investigation into the effects of the time dependent neutral wind flywheel on high-latitude ionospheric electrodynamics are presented. The results extend our previous work which used the National Center for Atmospheric Research Thermosphere/Ionosphere General Circulation Model (NCAR TIGCM) to theoretically simulate flywheel effects in the aftermath of a geomagnetic storm. The previous results indicated that the neutral circulation, set up by ion-neutral momentum coupling in the main phase of a geomagnetic storm, is maintained for several hours after the main phase has ended and may dominate height-integrated Hall currents and field-aligned currents for up to 4-5 hours. We extend the work of Deng et al. to include comparisons between the calculated time-dependent ionospheric Hall current system in the storm-time recovery period and that measured by instruments on board the Dynamics Explorer 2 (DE 2) satellite. Also, comparisons are made between calculated field-aligned currents and those derived from DE 2 magnetometer measurements. These calculations also allow us to calculate the power transfer rate (sometimes called the Poynting flux) between the magnetosphere and ionosphere. The following conclusions have been drawn: (1) Neutral winds can contribute significantly to the horizontal ionospheric current system in the period immediately following the main phase of a geomagnetic storm, especially over the magnetic polar cap and in regions of ion drift shear. (2) Neutral winds drive Hall currents that flow in the opposite direction to those driven by ion drifts. (3) The overall morphology of the calculated field-aligned current system agrees with previously published observations for the interplanetary magnetic field (IMF) B(sub Z) southward conditions, although the region I and region 2 currents are smeared by the TI(ICM model grid resolution. (4) Neutral winds can make significant contributions to the field-aligned current system when B(sub Z) northward conditions prevail following the main phase of a storm, but can account for only a fraction of the observed currents. (5) DE 2 measurements provide a demonstration of "local" (satellite-altitude) flywheel effects. (6) On the assumption that the magnetosphere acts as an insulator, we calculate neutral-wind-induced polarization electric fields of approx. 20-30 kV in the period immediately following the geomagnetic storm.

A Module for Adaptive Course Configuration and Assessment in Moodle

NASA Astrophysics Data System (ADS)

Limongelli, Carla; Sciarrone, Filippo; Temperini, Marco; Vaste, Giulia

Personalization and Adaptation are among the main challenges in the field of e-learning, where currently just few Learning Management Systems, mostly experimental ones, support such features. In this work we present an architecture that allows Moodle to interact with the Lecomps system, an adaptive learning system developed earlier by our research group, that has been working in a stand-alone modality so far. In particular, the Lecomps responsibilities are circumscribed to the sole production of personalized learning objects sequences and to the management of the student model, leaving to Moodle all the rest of the activities for course delivery. The Lecomps system supports the "dynamic" adaptation of learning objects sequences, basing on the student model, i.e., learner's Cognitive State and Learning Style. Basically, this work integrates two main Lecomps tasks into Moodle, to be directly managed by it: Authentication and Quizzes.

Electronic system for data acquisition to study radiation effects on operating MOSFET transistors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alves de Oliveira, Juliano; Assis de Melo, Marco Antônio; Guazzelli da Silveira, Marcilei A.

In this work we present the development of an acquisition system for characterizing transistors under X-ray radiation. The system is able to carry out the acquisition and to storage characteristic transistor curves. To test the acquisition system we have submitted polarized P channel MOS transistors under continuous 10-keV X-ray doses up to 1500 krad. The characterization system can operate in the saturation region or in the linear region in order to observe the behavior of the currents or voltages involved during the irradiation process. Initial tests consisted of placing the device under test (DUT) in front of the X-ray beammore » direction, while its drain current was constantly monitored through the prototype generated in this work, the data are stored continuously and system behavior was monitored during the test. In order to observe the behavior of the DUT during the radiation tests, we used an acquisition system that consists of an ultra-low consumption16-bit Texas Instruments MSP430 microprocessor. Preliminary results indicate linear behavior of the voltage as a function of the exposure time and fast recovery. These features may be favorable to use this device as a radiation dosimeter to monitor low rate X-ray.« less

Design and implementation of land reservation system

NASA Astrophysics Data System (ADS)

Gao, Yurong; Gao, Qingqiang

2009-10-01

Land reservation is defined as a land management policy for insuring the government to control primary land market. It requires the government to obtain the land first, according to plan, by purchase, confiscation and exchanging, and then exploit and consolidate the land for reservation. Underlying this policy, it is possible for the government to satisfy and manipulate the needs of land for urban development. The author designs and develops "Land Reservation System for Eastern Lake Development District" (LRSELDD), which deals with the realistic land requirement problems in Wuhan Eastern Lake Development Districts. The LRSELDD utilizes modern technologies and solutions of computer science and GIS to process multiple source data related with land. Based on experiments on the system, this paper will first analyze workflow land reservation system and design the system structure based on its principles, then illustrate the approach of organization and management of spatial data, describe the system functions according to the characteristics of land reservation and consolidation finally. The system is running to serve for current work in Eastern Lake Development Districts. It is able to scientifically manage both current and planning land information, as well as the information about land supplying. We use the LRSELDD in our routine work, and with such information, decisions on land confiscation and allocation will be made wisely and scientifically.

Recognizing the Operating Hand and the Hand-Changing Process for User Interface Adjustment on Smartphones †

PubMed Central

Guo, Hansong; Huang, He; Huang, Liusheng; Sun, Yu-E

2016-01-01

As the size of smartphone touchscreens has become larger and larger in recent years, operability with a single hand is getting worse, especially for female users. We envision that user experience can be significantly improved if smartphones are able to recognize the current operating hand, detect the hand-changing process and then adjust the user interfaces subsequently. In this paper, we proposed, implemented and evaluated two novel systems. The first one leverages the user-generated touchscreen traces to recognize the current operating hand, and the second one utilizes the accelerometer and gyroscope data of all kinds of activities in the user’s daily life to detect the hand-changing process. These two systems are based on two supervised classifiers constructed from a series of refined touchscreen trace, accelerometer and gyroscope features. As opposed to existing solutions that all require users to select the current operating hand or confirm the hand-changing process manually, our systems follow much more convenient and practical methods and allow users to change the operating hand frequently without any harm to the user experience. We conduct extensive experiments on Samsung Galaxy S4 smartphones, and the evaluation results demonstrate that our proposed systems can recognize the current operating hand and detect the hand-changing process with 94.1% and 93.9% precision and 94.1% and 93.7% True Positive Rates (TPR) respectively, when deciding with a single touchscreen trace or accelerometer-gyroscope data segment, and the False Positive Rates (FPR) are as low as 2.6% and 0.7% accordingly. These two systems can either work completely independently and achieve pretty high accuracies or work jointly to further improve the recognition accuracy. PMID:27556461

Recognizing the Operating Hand and the Hand-Changing Process for User Interface Adjustment on Smartphones.

PubMed

Guo, Hansong; Huang, He; Huang, Liusheng; Sun, Yu-E

2016-08-20

As the size of smartphone touchscreens has become larger and larger in recent years, operability with a single hand is getting worse, especially for female users. We envision that user experience can be significantly improved if smartphones are able to recognize the current operating hand, detect the hand-changing process and then adjust the user interfaces subsequently. In this paper, we proposed, implemented and evaluated two novel systems. The first one leverages the user-generated touchscreen traces to recognize the current operating hand, and the second one utilizes the accelerometer and gyroscope data of all kinds of activities in the user's daily life to detect the hand-changing process. These two systems are based on two supervised classifiers constructed from a series of refined touchscreen trace, accelerometer and gyroscope features. As opposed to existing solutions that all require users to select the current operating hand or confirm the hand-changing process manually, our systems follow much more convenient and practical methods and allow users to change the operating hand frequently without any harm to the user experience. We conduct extensive experiments on Samsung Galaxy S4 smartphones, and the evaluation results demonstrate that our proposed systems can recognize the current operating hand and detect the hand-changing process with 94.1% and 93.9% precision and 94.1% and 93.7% True Positive Rates (TPR) respectively, when deciding with a single touchscreen trace or accelerometer-gyroscope data segment, and the False Positive Rates (FPR) are as low as 2.6% and 0.7% accordingly. These two systems can either work completely independently and achieve pretty high accuracies or work jointly to further improve the recognition accuracy.

R744 ejector technology future perspectives

NASA Astrophysics Data System (ADS)

Hafner, Armin; Banasiak, Krzysztof

2016-09-01

Carbon Dioxide, CO2 (R744) was one of the first commonly applied working fluids in the infancy of refrigeration more than 100 years ago. In contrast to ammonia it mainly disappeared after the first generation of synthetic refrigerants have been introduced to the market after 1930. One reason was that the transition from low-rpm belt driven compressors towards the direct electrical motor driven compressors (50-60 Hz) was not performed for CO2 compressors before the revival introduced by Gustav Lorentzen in the 90is of last century. Since 1988 an enormous R & D effort has been made to further develop CO2 refrigeration technology in spite of the opposition from the chemical industry. Today CO2 refrigeration and heat pumping technologies are accepted as viable and sustainable alternatives for several applications like commercial refrigeration, transport refrigeration, vehicle air conditioning & heat pumping, domestic hot water heat pumps and industrial applications. For some applications, the current threshold to introduce R744 technology can be overcome when the system design takes into account the advantage of the thermo dynamical- and fluid properties of CO2. I.e. the system is designed for transcritical operation with all it pros and cons and takes into consideration how to minimize the losses, and to apply the normally lost expansion work. Shortcut-designs, i.e. drop in solutions, just replacing the H(C)FC refrigeration unit with an CO2 systems adapted for higher system pressures will not result in energy efficient products. CO2 systems do offer the advantage of enabling flooded evaporators supported with adapted ejector technology. These units offer high system performances at low temperature differences and show low temperature air mal-distributions across evaporators. This work gives an overview for the development possibilities for several applications during the next years. Resulting in a further market share increase of CO2 refrigeration and heat pump systems, as energy efficient alternatives to current systems not applying natural working fluids.

Human Planetary Landing System (HPLS) Capability Roadmap NRC Progress Review

NASA Technical Reports Server (NTRS)

Manning, Rob; Schmitt, Harrison H.; Graves, Claude

2005-01-01

Capability Roadmap Team. Capability Description, Scope and Capability Breakdown Structure. Benefits of the HPLS. Roadmap Process and Approach. Current State-of-the-Art, Assumptions and Key Requirements. Top Level HPLS Roadmap. Capability Presentations by Leads. Mission Drivers Requirements. "AEDL" System Engineering. Communication & Navigation Systems. Hypersonic Systems. Super to Subsonic Decelerator Systems. Terminal Descent and Landing Systems. A Priori In-Situ Mars Observations. AEDL Analysis, Test and Validation Infrastructure. Capability Technical Challenges. Capability Connection Points to other Roadmaps/Crosswalks. Summary of Top Level Capability. Forward Work.

Geomagnetically induced currents: Science, engineering, and applications readiness

NASA Astrophysics Data System (ADS)

Pulkkinen, A.; Bernabeu, E.; Thomson, A.; Viljanen, A.; Pirjola, R.; Boteler, D.; Eichner, J.; Cilliers, P. J.; Welling, D.; Savani, N. P.; Weigel, R. S.; Love, J. J.; Balch, C.; Ngwira, C. M.; Crowley, G.; Schultz, A.; Kataoka, R.; Anderson, B.; Fugate, D.; Simpson, J. J.; MacAlester, M.

2017-07-01

This paper is the primary deliverable of the very first NASA Living With a Star Institute Working Group, Geomagnetically Induced Currents (GIC) Working Group. The paper provides a broad overview of the current status and future challenges pertaining to the science, engineering, and applications of the GIC problem. Science is understood here as the basic space and Earth sciences research that allows improved understanding and physics-based modeling of the physical processes behind GIC. Engineering, in turn, is understood here as the "impact" aspect of GIC. Applications are understood as the models, tools, and activities that can provide actionable information to entities such as power systems operators for mitigating the effects of GIC and government agencies for managing any potential consequences from GIC impact to critical infrastructure. Applications can be considered the ultimate goal of our GIC work. In assessing the status of the field, we quantify the readiness of various applications in the mitigation context. We use the Applications Readiness Level (ARL) concept to carry out the quantification.

Geomagnetically induced currents: Science, engineering, and applications readiness

USGS Publications Warehouse

Pulkkinen, Antti; Bernabeu, E.; Thomson, A.; Viljanen, A.; Pirjola, R.; Boteler, D.; Eichner, J.; Cilliers, P.J.; Welling, D.; Savani, N.P.; Weigel, R.S.; Love, Jeffrey J.; Balch, Christopher; Ngwira, C.M.; Crowley, G.; Schultz, Adam; Kataoka, R.; Anderson, B.; Fugate, D.; Simpson, J.J.; MacAlester, M.

2017-01-01

This paper is the primary deliverable of the very first NASA Living With a Star Institute Working Group, Geomagnetically Induced Currents (GIC) Working Group. The paper provides a broad overview of the current status and future challenges pertaining to the science, engineering, and applications of the GIC problem. Science is understood here as the basic space and Earth sciences research that allows improved understanding and physics-based modeling of the physical processes behind GIC. Engineering, in turn, is understood here as the “impact” aspect of GIC. Applications are understood as the models, tools, and activities that can provide actionable information to entities such as power systems operators for mitigating the effects of GIC and government agencies for managing any potential consequences from GIC impact to critical infrastructure. Applications can be considered the ultimate goal of our GIC work. In assessing the status of the field, we quantify the readiness of various applications in the mitigation context. We use the Applications Readiness Level (ARL) concept to carry out the quantification.

Asthma Among Employed Adults, by Industry and Occupation - 21 States, 2013.

PubMed

Dodd, Katelynn E; Mazurek, Jacek M

2016-12-02

Workers in various industries and occupations are at risk for work-related asthma* (1). Data from the 2006-2007 adult Behavioral Risk Factor Surveillance System (BRFSS) Asthma Call-back Survey (ACBS), an in-depth asthma survey conducted with respondents who report an asthma diagnosis, from 33 states indicated that up to 48% of adult current asthma might be related to work and could therefore potentially be prevented (2). Identification of the industries and occupations with increased prevalence of asthma might inform work-related asthma intervention and prevention efforts. To assess the industry-specific and occupation-specific proportions of adults with current asthma by state, CDC analyzed data from the 2013 BRFSS industry and occupation module, collected from 21 states for participants aged ≥18 years who, at the time of the survey interview, were employed or had been out of work for <12 months. Among these respondents, 7.7% had current asthma; based on the Asthma Call-back Survey results, this finding means as many as 2.7 million U.S. workers might have asthma caused by or exacerbated by workplace conditions. State-specific variations in the prevalence of current asthma by industry and occupation were observed. By state, current asthma prevalence was highest among workers in the information industry (18.0%) in Massachusetts and in health care support occupations (21.5%) in Michigan. Analysis of BRFSS industry and occupation and optional asthma modules can be used to identify industries and occupations to assess for asthma among workers, identify workplace exposures, and guide the design and evaluation of effective work-related asthma prevention and education programs (1).

Rocket Based Combined Cycle (RBCC) Propulsion Technology Workshop. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Chojnacki, Kent T.

1992-01-01

The goal of the Rocket-Based Combined Cycle (RBCC) Propulsion Technology Workshop was to assess the RBCC propulsion system's viability for Earth-to-Orbit (ETO) transportation systems. This was accomplished by creating a forum (workshop) in which past work in the field of RBCC propulsion systems was reviewed, current technology status was evaluated, and future technology programs in the field of RBCC propulsion systems were postulated, discussed, and recommended.

Autonomy Community of Interest (COI) Test and Evaluation, Verification and Validation (TEVV) Working Group: Technology Investment Strategy 2015-2018

DTIC Science & Technology

2015-05-01

Evaluation Center of Excellence SUAS Small Unmanned Aircraft System SUT System under Test T&E Test and Evaluation TARDEC Tank Automotive Research...17 Distribution A: Distribution Unlimited 2 Background In the past decade, unmanned systems have significantly impacted warfare...environments at a speed and scale beyond manned capability. However, current unmanned systems operate with minimal autonomy. To meet warfighter needs and

Financing a College Education: How It Works, How It's Changing. American Council on Education/Oryx Press Series on Higher Education.

ERIC Educational Resources Information Center

King, Jacqueline E., Ed.

This collection of 15 essays by policy analysts and higher education specialists examines student financial aid, how policy and practice have changed, how student costs at U.S. colleges and universities are currently being met, and why and how enhancements to current programs would make the system more equitable. Following an introduction by D.…

Solar Sailing

NASA Technical Reports Server (NTRS)

Johnson, Les

2009-01-01

Solar sailing is a topic of growing technical and popular interest. Solar sail propulsion will make space exploration more affordable and offer access to destinations within (and beyond) the solar system that are currently beyond our technical reach. The lecture will describe solar sails, how they work, and what they will be used for in the exploration of space. It will include a discussion of current plans for solar sails and how advanced technology, such as nanotechnology, might enhance their performance. Much has been accomplished recently to make solar sail technology very close to becoming an engineering reality and it will soon be used by the world s space agencies in the exploration of the solar system and beyond. The first part of the lecture will summarize state-of-the-art space propulsion systems and technologies. Though these other technologies are the key to any deep space exploration by humans, robots, or both, solar-sail propulsion will make space exploration more affordable and offer access to distant and difficult destinations. The second part of the lecture will describe the fundamentals of space solar sail propulsion and will describe the near-, mid- and far-term missions that might use solar sails as a propulsion system. The third part of the lecture will describe solar sail technology and the construction of current and future sailcraft, including the work of both government and private space organizations.

[Surveillance of work-related suicide in France: An exploratory study].

PubMed

Bossard, C; Santin, G; Lopez, V; Imbernon, E; Cohidon, C

2016-06-01

Despite a large media coverage of the phenomenon, the number of work-related suicides is currently unknown in France. There are nevertheless some data available to document this important issue. The aim of this study was to explore the feasibility of an epidemiological surveillance system for work-related suicides designed to quantify and describe work-related suicides mainly according to economic sectors and occupational categories. Existing data sources in France were identified and evaluated for their relevance and their potential use in a multi-sources surveillance system. A regional pilot study was performed using the main relevant sources identified to investigate different aspects of the system design. Four major data sources were identified to be used to describe work-related suicides: death certificates, social insurance funds, data collected by the officers of the labor inspectorate and data collected from autopsy reports in forensic departments. The regional pilot study gave an estimate of 28 cases of work-related suicide in two years. The findings point out the difficulties involved and the criteria for successful implement of such a system. The study provides some solutions for carrying out this system, the achievement of which will depend upon particular resources and partners' agreements. Recommendations for the next steps have been made based on this work, including possible collaboration with forensic departments, which collect essential data for surveillance. Copyright © 2016. Published by Elsevier Masson SAS.

Electron cyclotron heating/current-drive system using high power tubes for QUEST spherical tokamak

NASA Astrophysics Data System (ADS)

Onchi, Takumi; Idei, H.; Hasegawa, M.; Nagata, T.; Kuroda, K.; Hanada, K.; Kariya, T.; Kubo, S.; Tsujimura, T. I.; Kobayashi, S.; Quest Team

2017-10-01

Electron cyclotron heating (ECH) is the primary method to ramp up plasma current non-inductively in QUEST spherical tokamak. A 28 GHz gyrotron is employed for short pulses, where the radio frequency (RF) power is about 300 kW. Current ramp-up efficiency of 0.5 A/W has been obtained with focused beam of the second harmonic X-mode. A quasi-optical polarizer unit has been newly installed to avoid arcing events. For steady-state tokamak operation, 8.56 GHz klystron with power of 200 kW is used as the CW-RF source. The high voltage power supply (54 kV/13 A) for the klystron has been built recently, and initial bench test of the CW-ECH system is starting. The array of insulated-gate bipolar transistor works to quickly cut off the input power for protecting the klystron. This work is supported by JSPS KAKENHI (15H04231), NIFS Collaboration Research program (NIFS13KUTR085, NIFS17KUTR128), and through MEXT funding for young scientists associated with active promotion of national university reforms.

Current DOT research on the effect of multiple site damage on structural integrity

NASA Technical Reports Server (NTRS)

Tong, P.; Arin, Kemal; Jeong, David Y.; Greif, R.; Brewer, John C.; Bobo, Stephan N.; Sampath, Sam N.

1992-01-01

Multiple site damage (MSD) is a type of cracking that may be found in aging airplanes and which may adversely affect their continuing airworthiness. The Volpe National Transportation Systems Center has supported the Federal Aviation Administration Technical Center on structural integrity research for the past two and half years. The work has focused on understanding the behavior of MSD, detection of MSD during airframe inspection, and the avoidance of MSD in future designs. These three elements of the MSD problem are addressed and a summary of the completed work, the current status, and requirements for future research is provided.

Dynamic least-cost optimisation of wastewater system remedial works requirements.

PubMed

Vojinovic, Z; Solomatine, D; Price, R K

2006-01-01

In recent years, there has been increasing concern for wastewater system failure and identification of optimal set of remedial works requirements. So far, several methodologies have been developed and applied in asset management activities by various water companies worldwide, but often with limited success. In order to fill the gap, there are several research projects that have been undertaken in exploring various algorithms to optimise remedial works requirements, but mostly for drinking water supply systems, and very limited work has been carried out for the wastewater assets. Some of the major deficiencies of commonly used methods can be found in either one or more of the following aspects: inadequate representation of systems complexity, incorporation of a dynamic model into the decision-making loop, the choice of an appropriate optimisation technique and experience in applying that technique. This paper is oriented towards resolving these issues and discusses a new approach for the optimisation of wastewater systems remedial works requirements. It is proposed that the optimal problem search is performed by a global optimisation tool (with various random search algorithms) and the system performance is simulated by the hydrodynamic pipe network model. The work on assembling all required elements and the development of an appropriate interface protocols between the two tools, aimed to decode the potential remedial solutions into the pipe network model and to calculate the corresponding scenario costs, is currently underway.

Cellular Decomposition Based Hybrid-Hierarchical Control Systems with Applications to Flight Management Systems

NASA Technical Reports Server (NTRS)

Caines, P. E.

1999-01-01

The work in this research project has been focused on the construction of a hierarchical hybrid control theory which is applicable to flight management systems. The motivation and underlying philosophical position for this work has been that the scale, inherent complexity and the large number of agents (aircraft) involved in an air traffic system imply that a hierarchical modelling and control methodology is required for its management and real time control. In the current work the complex discrete or continuous state space of a system with a small number of agents is aggregated in such a way that discrete (finite state machine or supervisory automaton) controlled dynamics are abstracted from the system's behaviour. High level control may then be either directly applied at this abstracted level, or, if this is in itself of significant complexity, further layers of abstractions may be created to produce a system with an acceptable degree of complexity at each level. By the nature of this construction, high level commands are necessarily realizable at lower levels in the system.

A Fabry-Pérot electro-optic sensing system using a drive-current-tuned wavelength laser diode.

PubMed

Kuo, Wen-Kai; Wu, Pei-Yu; Lee, Chang-Ching

2010-05-01

A Fabry-Pérot enhanced electro-optic sensing system that utilizes a drive-current-tuned wavelength laser diode is presented. An electro-optic prober made of LiNbO(3) crystal with an asymmetric Fabry-Pérot cavity is used in this system. To lock the wavelength of the laser diode at resonant condition, a closed-loop power control scheme is proposed. Experiment results show that the system can keep the electro-optic prober at high sensitivity for a long working time when the closed-loop control function is on. If this function is off, the sensitivity may be fluctuated and only one-third of the best level in the worst case.

Personalization of Rule-based Web Services.

PubMed

Choi, Okkyung; Han, Sang Yong

2008-04-04

Nowadays Web users have clearly expressed their wishes to receive personalized services directly. Personalization is the way to tailor services directly to the immediate requirements of the user. However, the current Web Services System does not provide any features supporting this such as consideration of personalization of services and intelligent matchmaking. In this research a flexible, personalized Rule-based Web Services System to address these problems and to enable efficient search, discovery and construction across general Web documents and Semantic Web documents in a Web Services System is proposed. This system utilizes matchmaking among service requesters', service providers' and users' preferences using a Rule-based Search Method, and subsequently ranks search results. A prototype of efficient Web Services search and construction for the suggested system is developed based on the current work.

Computerized physician order entry from a chief information officer perspective.

PubMed

Cotter, Carole M

2004-12-01

Designing and implementing a computerized physician order entry system in the critical care units of a large urban hospital system is an enormous undertaking. With their significant potential to improve health care and significantly reduce errors, the time for computerized physician order entry or physician order management systems is past due. Careful integrated planning is the key to success, requiring multidisciplinary teams at all levels of clinical and administrative management to work together. Articulated from the viewpoint of the Chief Information Officer of Lifespan, a not-for-profit hospital system in Rhode Island, the vision and strategy preceding the information technology plan, understanding the system's current state, the gap analysis between current and future state, and finally, building and implementing the information technology plan are described.

Electric Power Systems Are Profoundly Changing | Energy Analysis | NREL

Science.gov Websites

. Advances in efficiency and smart grid technologies also have the potential to change historical demand installations are increasing. NREL works within these currents of change, and helps shape them to enhance our

Backup of renewable energy for an electrical island: case study of Israeli electricity system--current status.

PubMed

Fakhouri, A; Kuperman, A

2014-01-01

The paper focuses on the quantitative analysis of Israeli Government's targets of 10% renewable energy penetration by 2020 and determining the desired methodology (models) for assessing the effects on the electricity market, addressing the fact that Israel is an electricity island. The main objective is to determine the influence of achieving the Government's goals for renewable energy penetration on the need for backup in the Israeli electricity system. This work presents the current situation of the Israeli electricity market and the study to be taken in order to assess the undesirable effects resulting from the intermittency of electricity generated by wind and solar power stations as well as presents some solutions to mitigating these phenomena. Future work will focus on a quantitative analysis of model runs and determine the amounts of backup required relative to the amount of installed capacity from renewable resources.

Vincenc Alexandr Bohdálek (1801-1883): Czech anatomist and neuroscientist of the nineteenth century.

PubMed

Chvátal, Alexandr; Kachlík, David

2017-01-01

Vincenc Alexandr Bohdálek (Vincenz Alexander Bochdalek) was a well-known anatomist and pathologist in the nineteenth century. Today, however, his name is all but forgotten. Bohdálek described a number of anatomical structures; some of them became eponyms. Unfortunately, his findings concerning the innervation of the eye, upper jaw, hard palate, auditory system, and meninges are little known today. This current overview is based on available archival sources and provides an insight into his results in the field of nervous system research, which account for almost half his work. Bohdálek can clearly be considered a pioneer in the field we now call functional anatomy, as he tried to find a physiological explanation for the anatomical and pathological findings he observed. The work and results of this truly outstanding neuroscientist of his time are thus again available to current and future generations of neuroscientists and neuroanatomists.

When Measurement Benefits the Measured

DTIC Science & Technology

2014-04-23

manage how you estimate your work and how you manage the quality of our work. Knowledge workers manage themselves with data. Software engineers...development, coaching, and training. His current research and development interests include data quality assessment and improvement, project...was an engineer and manager at Boeing in Seattle. He has a Masters Degree in Systems Engineering and is a senior member of IEEE. Mark is a certified

Defense: FY2012 Budget Request, Authorization and Appropriations

DTIC Science & Technology

2012-02-13

current counterinsurgency and dismounted operations in [Iraq and Afghanistan] place service women in direct combat action with the enemy. The ...vehicles, including the EFV and a modified version of the AAV-7. However, the provision bars any other amphibious vehicle development work until the ...would allow information technology companies other than the original developer to bid for maintenance and upgrade work on the system

The Evolution of Random Number Generation in MUVES

DTIC Science & Technology

2017-01-01

mathematical basis and statistical justification for algorithms used in the code. The working code provided produces results identical to the current...MUVES, includ- ing the mathematical basis and statistical justification for algorithms used in the code. The working code provided produces results...questionable numerical and statistical properties. The development of the modern system is traced through software change requests, resulting in a random number

Family, Children, and Poverty: Can Data Tell Us Anything? A Report from the Roundtable Project of the California Children's Council.

ERIC Educational Resources Information Center

Hailey, Jack

Current census data make clear that California's poor are poorer today than they were 10 years ago. In particular, data indicate that single working women with children earn less than working, married women with children. Because California's state-subsidized day care system directs programs to enroll children on the waiting list who are from…

Production Indicators of Mathematics Teachers in Public Universities of the Valencian Community on Web of Science

ERIC Educational Resources Information Center

Lorenzo, G.; Santagueda, M.

2016-01-01

The current evaluation and comparison system of scientific production by impact factor has been criticised from different perspectives in recent years, and has ensured that publishing in high-impact journals does not necessarily imply that works are quality works. Many of these jobs are mostly not cited or, in the best of cases, only a very small…

Quantum Transport

DTIC Science & Technology

1993-05-14

Lent 6 I We have studied transmission in quantum waveguides in the presence of resonant cavities. This work was inspired by our previous modeling of the...conductance of resonantly- coupled quantum wire systems. We expected to find qualitatively the same phenomena as in the much studied case of double...transmission peaks does not give the location of the quasi-bound3 states, like for double-barrier resonant tunneling. In current work, we study

NASA RPS Program Overview: A Focus on RPS Users

NASA Technical Reports Server (NTRS)

Hamley, John A.; Sutliff, Thomas J.; Sandifer, Carl E., II; Zakrajsek, June F.

2016-01-01

The goal of NASA's Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), assesses the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Programs budgetary needs, and disseminates current information about RPS to the community of potential users. This process has been refined and used to determine the current content of the RPS Programs portfolio. This portfolio currently includes an effort to mature advanced thermoelectric technology for possible integration into an enhanced Multi-Mission Radioisotope Generator (eMMRTG), sustainment and production of the currently deployed MMRTG, and technology investments that could lead to a future Stirling Radioisotope Generator (SRG). This paper describes the program planning processes that have been used, the currently available MMRTG, and one of the potential future systems, the eMMRTG.

Reentry Program and Social Work Education: Training the Next Generation of Criminal Justice Social Workers.

PubMed

Franke, Nancy D; Treglia, Dan; Cnaan, Ram A

2017-01-01

Social work plays a marginal role in opposing the trend of mass incarceration and high rates of recidivism, and social work education offers limited opportunities for students to specialize in working with people who are currently or were previously incarcerated. How to train students of social work to work against mass-incarceration is still challenging. The authors devised and implemented an in-school social service agency devoted to working with people pre and post release from a prison system. The agency is a field practicum setting where interested students study and practice reentry work. In this article, the authors describe and assess the educational merit of this in-school agency. Findings from surveys of students and alumni suggest that the program attained its educational goals of connecting classroom education to practice experience and training students for careers in the criminal justice system. The authors also discuss pending challenges. The experience of the Goldring Reentry Initiative suggests that by developing their own social work agencies, the authors may be able to heighten their students educational experience and expand their contribution to social work practice broadly.

Gaps and Barriers in Services for Children in State Mental Health Plans

ERIC Educational Resources Information Center

Gould, Sara R.; Beals-Erickson, Sarah E.; Roberts, Michael C.

2012-01-01

Significant gaps exist in children's mental healthcare, and barriers prevent access to existing services. Current federal initiatives call for state governmental agencies to recognize and resolve deficits in their systems of care. Previous work has acknowledged some of the problems in meeting the mental health needs of children within a system of…

Large-Scale Educational Telecommunications Systems for the U.S.: An Analysis of Educational Needs and Technological Opportunities.

ERIC Educational Resources Information Center

Morgan, Robert P.; And Others

Opportunities for utilizing large-scale educational telecommunications delivery systems to aid in meeting needs of U.S. education are extensively analyzed in a NASA-funded report. Status, trends, and issues in various educational subsectors are assessed, along with current use of telecommunications and technology and factors working for and…

High Resolution Time Series Observations of Bio-Optical and Physical Variability in the Arabian Sea

DTIC Science & Technology

1998-09-30

1995-October 20, 1995). Multi-variable moored systems ( MVMS ) were deployed by our group at 35 and 80m. The MVMS utilizes a VMCM to measure currents...similar to that of the UCSB MVMSs. WORK COMPLETED Our MVMS interdisciplinary systems with sampling intervals of a few minutes were placed on a mooring

Analyses of User Rationality and System Learnability: Performing Task Variants in User Tests

ERIC Educational Resources Information Center

Law, Effie Lai-Chong; Blazic, Borka Jerman; Pipan, Matic

2007-01-01

No systematic empirical study on investigating the effects of performing task variants on user cognitive strategy and behaviour in usability tests and on learnability of the system being tested has been documented in the literature. The current use-inspired basic research work aims to identify the underlying cognitive mechanisms and the practical…

Going Underground: A Field Investigation and Lab Activity on Karst Topography and Water Systems

ERIC Educational Resources Information Center

O'Dell, Gary; Gonzalez-Espada, Wilson

2011-01-01

Students learn science best with activities that mirror the way scientists work. This article describes how geologists investigate groundwater flow systems in areas of karst topography--geologic formations shaped by dissolving bedrock--and provides a way for students to replicate this research. Students also use electric current to model water…

An Autonomous Mobile Agent-Based Distributed Learning Architecture: A Proposal and Analytical Analysis

ERIC Educational Resources Information Center

Ahmed, Iftikhar; Sadeq, Muhammad Jafar

2006-01-01

Current distance learning systems are increasingly packing highly data-intensive contents on servers, resulting in the congestion of network and server resources at peak service times. A distributed learning system based on faded information field (FIF) architecture that employs mobile agents (MAs) has been proposed and simulated in this work. The…

Teachers' Perceptions of the Role of Occupational Therapist in Schools

ERIC Educational Resources Information Center

Benson, Jeryl D.; Szucs, Kimberly A.; Mejasic, J. J.

2016-01-01

This article explores how teachers in the school system perceive the role of the occupational therapist. Participants of this study were 47 teachers in the school systems that currently work with an occupational therapist in a public or private school. Data were collected via an anonymous online survey and analyzed using descriptive statistics and…

Intelligent transportation system (ITS) study for the Buffalo and Niagara Falls metropolitan area, Erie and Niagara Counties, New York : alternative technologies, working paper #6

DOT National Transportation Integrated Search

1997-06-18

The current paper provides a discussion of the technologies available to collect/transmit process and disseminate the needed data in order to meet the needs of the Buffalo ITS data sources, system users and their needs. The technologies which could b...

Caution or Stasis: Using Research to Rethink Schools--Now

ERIC Educational Resources Information Center

Blodget, Alden

2016-01-01

In this article, Alden Blodget reflects on his more than 50 years of working in what he terms "the tragicomedy club of school reform," and suggests a need to rethink not just classroom teaching methods but the entire system. Blodget states that if the current system is built on faulty assumptions about learning, then there must be a…

Comparison between wavelet and wavelet packet transform features for classification of faults in distribution system

NASA Astrophysics Data System (ADS)

Arvind, Pratul

2012-11-01

The ability to identify and classify all ten types of faults in a distribution system is an important task for protection engineers. Unlike transmission system, distribution systems have a complex configuration and are subjected to frequent faults. In the present work, an algorithm has been developed for identifying all ten types of faults in a distribution system by collecting current samples at the substation end. The samples are subjected to wavelet packet transform and artificial neural network in order to yield better classification results. A comparison of results between wavelet transform and wavelet packet transform is also presented thereby justifying the feature extracted from wavelet packet transform yields promising results. It should also be noted that current samples are collected after simulating a 25kv distribution system in PSCAD software.

The health care system for female workers and its current status in Japan.

PubMed

Nohara, M; Kagawa, J

2000-11-01

In this paper we describe female workers' health care, the women's and maternal protection system within the Japanese legal system, the current status of female workers in Japan, and problems regarding methods of advancing health care and the women's or maternal protection system. Motherhood is respected in the workplace in Japan, and in order to provide an environment in which women can work and still bear and rear children with a sense of security, laws concerning maternal protection of female workers, and revisions in terms of the system have been made, and a new system has been in effect since the fiscal year of 1998. Nevertheless, gender discrimination against women and the disparagement of women, rooted in gender role stereotypes concerning the division of labor, remain firmly planted in the social environment and in long-established custom.

Fundamental Technology Development for Gas-Turbine Engine Health Management

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

2007-01-01

Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

A Proposed Collaborative Framework for Prefabricated Housing Construction Using RFID Technology

NASA Astrophysics Data System (ADS)

Charnwasununth, Phatsaphan; Yabuki, Nobuyoshi; Tongthong, Tanit

Despite the popularity of prefabricated housing construction in Thailand and many other countries, due to the lack of collaboration in current practice, undesired low productivity and a number of mistakes are identified. This research proposes a framework to raise the collaborative level for improving productivity and reducing mistake occurrences at sites. In this framework, RFID system bridges the gap between the real situation and the design, and the proposed system can cope with the unexpected construction conditions by generating proper alternatives. This system is composed of PDAs, RFID readers, laptop PCs, and a desktop PC. Six main modules and a database system are implemented in laptop PCs for recording actual site conditions, generating working alternatives, providing related information, and evaluating the work.

GEWEX Cloud System Study (GCSS) Working Group on Cirrus Cloud Systems (WG2)

NASA Technical Reports Server (NTRS)

Starr, David

2002-01-01

Status, progress and plans will be given for current GCSS (GEWEX Cloud System Study) WG2 (Working Group on Cirrus Cloud Systems) projects, including: (a) the Idealized Cirrus Model Comparison Project, (b) the Cirrus Parcel Model Comparison Project (Phase 2), and (c) the developing Hurricane Nora extended outflow model case study project. Past results will be summarized and plans for the upcoming year described. Issues and strategies will be discussed. Prospects for developing improved cloud parameterizations derived from results of GCSS WG2 projects will be assessed. Plans for NASA's CRYSTAL-FACE (Cirrus Regional Study of Tropical Anvils and Layers - Florida Area Cirrus Experiment) potential opportunities for use of those data for WG2 model simulations (future projects) will be briefly described.

Distributed photovoltaic systems: Utility interface issues and their present status

NASA Technical Reports Server (NTRS)

Hassan, M.; Klein, J.

1981-01-01

Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design.

Using democracy to award research funding: an observational study.

PubMed

Barnett, Adrian G; Clarke, Philip; Vaquette, Cedryck; Graves, Nicholas

2017-01-01

Winning funding for health and medical research usually involves a lengthy application process. With success rates under 20%, much of the time spent by 80% of applicants could have been better used on actual research. An alternative funding system that could save time is using democracy to award the most deserving researchers based on votes from the research community. We aimed to pilot how such a system could work and examine some potential biases. We used an online survey with a convenience sample of Australian researchers. Researchers were asked to name the 10 scientists currently working in Australia that they thought most deserved funding for future research. For comparison, we used recent winners from large national fellowship schemes that used traditional peer review. Voting took a median of 5 min (inter-quartile range 3 to 10 min). Extrapolating to a national voting scheme, we estimate 599 working days of voting time (95% CI 490 to 728), compared with 827 working days for the current peer review system for fellowships. The gender ratio in the votes was a more equal 45:55 (female to male) compared with 34:66 in recent fellowship winners, although this could be explained by Simpson's paradox. Voters were biased towards their own institution, with an additional 1.6 votes per ballot (inter-quartile range 0.8 to 2.2) above the expected number. Respondents raised many concerns about the idea of using democracy to fund research, including vote rigging, lobbying and it becoming a popularity contest. This is a preliminary study of using voting that does not investigate many of the concerns about how a voting system would work. We were able to show that voting would take less time than traditional peer review and would spread the workload over many more reviewers. Further studies of alternative funding systems are needed as well as a wide discussion with the research community about potential changes.

Locational Marginal Pricing in the Campus Power System at the Power Distribution Level

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hao, Jun; Gu, Yi; Zhang, Yingchen

2016-11-14

In the development of smart grid at distribution level, the realization of real-time nodal pricing is one of the key challenges. The research work in this paper implements and studies the methodology of locational marginal pricing at distribution level based on a real-world distribution power system. The pricing mechanism utilizes optimal power flow to calculate the corresponding distributional nodal prices. Both Direct Current Optimal Power Flow and Alternate Current Optimal Power Flow are utilized to calculate and analyze the nodal prices. The University of Denver campus power grid is used as the power distribution system test bed to demonstrate themore » pricing methodology.« less

Differences in brain morphology and working memory capacity across childhood.

PubMed

Bathelt, Joe; Gathercole, Susan E; Johnson, Amy; Astle, Duncan E

2018-05-01

Working memory (WM) skills are closely associated with learning progress in key areas such as reading and mathematics across childhood. As yet, however, little is known about how the brain systems underpinning WM develop over this critical developmental period. The current study investigated whether and how structural brain correlates of components of the working memory system change over development. Verbal and visuospatial short-term and working memory were assessed in 153 children between 5.58 and 15.92 years, and latent components of the working memory system were derived. Fractional anisotropy and cortical thickness maps were derived from T1-weighted and diffusion-weighted MRI and processed using eigenanatomy decomposition. There was a greater involvement of the corpus callosum and posterior temporal white matter in younger children for performance associated with the executive part of the working memory system. For older children, this was more closely linked with the thickness of the occipitotemporal cortex. These findings suggest that increasing specialization leads to shifts in the contribution of neural substrates over childhood, moving from an early dependence on a distributed system supported by long-range connections to later reliance on specialized local circuitry. Our findings demonstrate that despite the component factor structure being stable across childhood, the underlying brain systems supporting working memory change. Taking the age of the child into account, and not just their overall score, is likely to be critical for understanding the nature of the limitations on their working memory capacity. © 2017 The Authors. Developmental Science Published by John Wiley & Sons Ltd.

Design Science Methodology Applied to a Chemical Surveillance Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Zhuanyi; Han, Kyungsik; Charles-Smith, Lauren E.

Public health surveillance systems gain significant benefits from integrating existing early incident detection systems,supported by closed data sources, with open source data.However, identifying potential alerting incidents relies on finding accurate, reliable sources and presenting the high volume of data in a way that increases analysts work efficiency; a challenge for any system that leverages open source data. In this paper, we present the design concept and the applied design science research methodology of ChemVeillance, a chemical analyst surveillance system.Our work portrays a system design and approach that translates theoretical methodology into practice creating a powerful surveillance system built for specificmore » use cases.Researchers, designers, developers, and related professionals in the health surveillance community can build upon the principles and methodology described here to enhance and broaden current surveillance systems leading to improved situational awareness based on a robust integrated early warning system.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, H. P.; Basso, T. S.; Kroposki, B.

The Department of Energy (DOE) Distributed Power Program (DPP) is conducting work to complete, validate in the field, and support the development of a national interconnection standard for distributed energy resources (DER), and to address the institutional and regulatory barriers slowing the commercial adoption of DER systems. This work includes support for the IEEE standards, including P1547 Standard for Interconnecting Distributed Resources with Electric Power Systems, P1589 Standard for Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems, and the P1608 Application Guide. Work is also in progress on system integration research and development (R&D) on themore » interface and control of DER with local energy systems. Additional efforts are supporting high-reliability power for industry, evaluating innovative concepts for DER applications, and exploring plug-and-play interface and control technologies for intelligent autonomous interconnection systems. This paper summarizes (1) the current status of the IEEE interconnection standards and application guides in support of DER, and (2) the R&D in progress at the National Renewable Energy Laboratory (NREL) for interconnection and system integration and application of distributed energy resources.« less

Natural Crack Sizing Based on Eddy Current Image and Electromagnetic Field Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Endo, H.; Uchimoto, T.; Takagi, T.

2006-03-06

An eddy current testing (ECT) system with multi-coil type probes is applied to size up cracks fabricated on austenite stainless plates. We have developed muti-channel ECT system to produce data as digital images. The probes consist of transmit-receive type sensors as elements to classify crack directions, working as two scan direction modes simultaneously. Template matching applied to the ECT images determines regions of interest in sizing up cracks. Finite element based inversion sizes up the crack depth from the measured ECT signal. The present paper demonstrates this approach for fatigue crack and stress corrosion cracking.

Combined Quarterly Technical Report Number 23. SATNET Development and Operation. Pluribus Satellite IMP Development. Remote Site Maintenance. Internet Operations and Maintenance. Mobile Access Terminal Network. TCP for the HP3000. TCP-TAC. TCP for VAX-UNIX

DTIC Science & Technology

1981-11-01

evaluate and test these ideas in the Internet research context. 4. Field third-generation gateways. At this point in time, we purposely avoid selecting a...plan to cover the period from now until the time when a gateway system can be fielded which implements the results of the current work in the Internet ... research community. The current gateway system is inadequate from both a functionality and a• performance standpoint, and therefore the transition

Improving healthcare using Lean processes.

PubMed

Baker, G Ross

2014-01-01

For more than a decade, healthcare organizations across Canada have been using Lean management tools to improve care processes, reduce preventable adverse events, increase patient satisfaction and create better work environments. The largest system-wide effort in Canada, and perhaps anywhere, is currently under way in Saskatchewan. The jury is still out on whether Lean efforts in that province, or elsewhere in Canada, are robust enough to transform current delivery systems and sustain new levels of performance. This issue of Healthcare Quarterly features several articles that provide a perspective on Lean methods in healthcare. Copyright © 2014 Longwoods Publishing.

The radiated electromagnetic field from collimated gamma rays and electron beams in air

NASA Astrophysics Data System (ADS)

Tumolillo, T. A.; Wondra, J. P.; Hobbs, W. E.; Smith, K.

1980-12-01

Nuclear weapons effects computer codes are used to study the electromagnetic field produced by gamma rays or by highly relativistic electron beams moving through the air. Consideration is given to large-area electron and gamma beams, small-area electron beams, variation of total beam current, variation of pressure in the beam channel, variation of the beam rise time, variation of beam radius, far-field radiated signals, and induced current on a system from a charged-particle beam. The work has application to system EMP coupling from nuclear weapons or charged-particle-beam weapons.

High-κ gate dielectrics: Current status and materials properties considerations

NASA Astrophysics Data System (ADS)

Wilk, G. D.; Wallace, R. M.; Anthony, J. M.

2001-05-01

Many materials systems are currently under consideration as potential replacements for SiO2 as the gate dielectric material for sub-0.1 μm complementary metal-oxide-semiconductor (CMOS) technology. A systematic consideration of the required properties of gate dielectrics indicates that the key guidelines for selecting an alternative gate dielectric are (a) permittivity, band gap, and band alignment to silicon, (b) thermodynamic stability, (c) film morphology, (d) interface quality, (e) compatibility with the current or expected materials to be used in processing for CMOS devices, (f) process compatibility, and (g) reliability. Many dielectrics appear favorable in some of these areas, but very few materials are promising with respect to all of these guidelines. A review of current work and literature in the area of alternate gate dielectrics is given. Based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward successful integration into the expected processing conditions for future CMOS technologies, especially due to their tendency to form at interfaces with Si (e.g. silicates). These pseudobinary systems also thereby enable the use of other high-κ materials by serving as an interfacial high-κ layer. While work is ongoing, much research is still required, as it is clear that any material which is to replace SiO2 as the gate dielectric faces a formidable challenge. The requirements for process integration compatibility are remarkably demanding, and any serious candidates will emerge only through continued, intensive investigation.

Leakage current-induced effects in the silicon microstrip and gas electron multiplier readout chain and their compensation method

NASA Astrophysics Data System (ADS)

Zubrzycka, W.; Kasinski, K.

2018-04-01

Leakage current flowing into the charge sensitive amplifier (CSA) is a common issue in many radiation detection systems as it can increase overall system noise, shift a DC baseline or even lead a recording channel to instability. The commonly known leakage current contributor is a detector, however other system components like wires or an input protection circuit may become a serious problem. Compensation of the leakage current resulting from the electrostatic discharge (ESD) protection circuit by properly sizing its components is possible only for a narrow temperature range. Moreover, the leakage current from external sources can be significantly larger. Many applications, especially High Energy Physics (HEP) experiments, require a fast baseline restoration for high input hit rates by applying either a low-value feedback resistor or a high feedback resistance combined with a pulsed reset circuit. Leakage current flowing in the feedback in conjunction with a large feedback resistance supplied with a pulsed reset results in a significant voltage offset between the CSA input and output which can cause problems (e.g. fake hits or instability). This paper shows an issue referred to the leakage current of the ESD protection circuit flowing into the input amplifier. The following analysis and proposed solution is a result of the time and energy readout ASIC project realization for the Compressed Baryonic Matter (CBM) experiment at FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. This chip is purposed to work with microstrip and gaseous detectors, with high average input pulses frequencies (250 kHit/s per channel) and the possibility to process input charge of both polarities. We present measurements of the test structure fabricated in UMC 180 nm technology and propose a solution addressing leakage current related issues. This work combines the leakage current compensation capabilities at the CSA level with high, controllable value of the amplifier feedback resistor independent of the leakage current level and polarity. The simulation results of the double, switchable, Krummenacher circuit-based feedback application in the CSA with a pulsed reset functionality are presented.

Surveillance of work-related asthma in new york state.

PubMed

Tice, Cori J; Cummings, Karen R; Gelberg, Kitty H

2010-04-01

The objective of this paper is to determine the percent of adults with asthma attributable to work and describe characteristics of the work-related asthma population in New York State. Sociodemographic and control characteristics of those with and without work-related asthma are compared. Data from three population-based surveys and one case-based surveillance system were analyzed. Work-relatedness of asthma was determined by self-report for the population-based surveys and by physician report for the case-based system. Self-reported sociodemographic and control characteristics were analyzed for the population-based surveys by work-relatedness. The percent of work-relatedness among adults with current asthma in New York State ranged from 10.6% to 44.5%. Significantly more adults with work-related asthma had poorly controlled asthma than those without work-related asthma. More adults with work-related asthma also tended to be employed in the manufacturing, educational services, and public administration industries than the general population. The most frequently reported exposure was dust. Adults with work-related asthma have decreased control and adverse socioeconomic impacts compared to those with asthma that is not work-related. Increased recognition and physician reporting is necessary to further prevent the impact of work-related exposures.

CAD/CAM data management needs, requirements and options

NASA Technical Reports Server (NTRS)

Lopatka, R. S.; Johnson, T. G.

1978-01-01

The requirements for a data management system in support of technical or scientific applications and possible courses of action were reviewed. Specific requirements were evolved while working towards higher level integration impacting all phases of the current design process and through examination of commercially marketed systems and related data base research. Arguments are proposed for varied approaches in implementing data base systems ranging from no action necessary to immediate procurement of an existing data base management system.

Manager's assistant systems for space system planning

NASA Technical Reports Server (NTRS)

Bewley, William L.; Burnard, Robert; Edwards, Gary E.; Shoop, James

1992-01-01

This paper describes a class of knowledge-based 'assistant' systems for space system planning. Derived from technology produced for the DARPA/USAF Pilot's Associate program, these assistant systems help the human planner by doing the bookkeeping to maintain plan data and executing the procedures and heuristics currently used by the human planner to define, assess, diagnose, and revise plans. Intelligent systems for Space Station Freedom assembly sequence planning and Advanced Launch System modeling will be presented as examples. Ongoing NASA-funded work on a framework supporting the development of such tools will also be described.

Development of uniform standards for allowable lane closure : final report, September 2008.

DOT National Transportation Integrated Search

2008-09-01

Procedures for determining allowable lane closure hours to perform maintenance, construction, resurfacing, regional permit and major access permit work on the state highway system were evaluated. The current process involves the collection of traffic...

[work motivation -- assessment instruments and their relevance for medical care].

PubMed

Fiedler, Rolf G; Ranft, Andreas; Greitemann, Bernhard; Heuft, Gereon

2005-11-01

The relevance of work motivation for medical research and healthcare, in particular rehabilitation, is described. Four diagnostic instruments in the German language are introduced which can assess work motivation using a scale system: AVEM, JDS, LMI and FBTM. Their possible application and potential usage for the clinical area are discussed. Apart from the FBTM, none of these instruments can be directly used as a general instrument in a normal medical clinical setting. Finally, a current model for work motivation (compensatory model of work motivation and volition) is presented that contains basis concepts, which are judged as important for future research questions concerning the development of motivation diagnostic instruments.

Man-machine interface requirements - advanced technology

NASA Technical Reports Server (NTRS)

Remington, R. W.; Wiener, E. L.

1984-01-01

Research issues and areas are identified where increased understanding of the human operator and the interaction between the operator and the avionics could lead to improvements in the performance of current and proposed helicopters. Both current and advanced helicopter systems and avionics are considered. Areas critical to man-machine interface requirements include: (1) artificial intelligence; (2) visual displays; (3) voice technology; (4) cockpit integration; and (5) pilot work loads and performance.

Pointing and Jitter Control for the USNA Multi-Beam Combining System

DTIC Science & Technology

2013-05-10

previous work, an adaptive H-infinity optimal controller has been developed to control a single beam using a beam position detector for feedback... turbulence and airborne particles, platform jitter, lack of feedback from the target , and current laser technology represent just a few of these...lasers. Solid state lasers, however, cannot currently provide high enough power levels to destroy a target using a single beam. On solid-state

Studies in Income Distribution. Estimation of Social Security Taxes on the March Current Population Survey. No. 4.

ERIC Educational Resources Information Center

Bridges, Benjamin, Jr.; Johnston, Mary P.

The impact of the tax-transfer system on the distribution of income among economic units is the subject of a number of studies by the Office of Research and Statistics of the Social Security Administration. One of the most important data sources for the work is the Census Bureau's March Current Population Survey (CPS). To conduct such studies, the…

A network security monitor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heberlein, L.T.; Dias, G.V.; Levitt, K.N.

1989-11-01

The study of security in computer networks is a rapidly growing area of interest because of the proliferation of networks and the paucity of security measures in most current networks. Since most networks consist of a collection of inter-connected local area networks (LANs), this paper concentrates on the security-related issues in a single broadcast LAN such as Ethernet. Specifically, we formalize various possible network attacks and outline methods of detecting them. Our basic strategy is to develop profiles of usage of network resources and then compare current usage patterns with the historical profile to determine possible security violations. Thus, ourmore » work is similar to the host-based intrusion-detection systems such as SRI's IDES. Different from such systems, however, is our use of a hierarchical model to refine the focus of the intrusion-detection mechanism. We also report on the development of our experimental LAN monitor currently under implementation. Several network attacks have been simulated and results on how the monitor has been able to detect these attacks are also analyzed. Initial results demonstrate that many network attacks are detectable with our monitor, although it can surely be defeated. Current work is focusing on the integration of network monitoring with host-based techniques. 20 refs., 2 figs.« less

Case Studies in Application of System Engineering Practices to Capstone Projects

NASA Technical Reports Server (NTRS)

Murphy, Gloria; vanSusante, Paul; Carmen, Christina; Morris, Tommy; Schmidt, Peter; Zalewski, Janusz

2011-01-01

The Exploration Systems Mission Directorate (ESMD) of the National Aeronautics and Space Administration (NASA) sponsors a faculty fellowship program that engages researchers with interests aligned with current ESMD development programs. The faculty-members are committed to run a capstone senior design project based- on the materials and experience gained during the fellowship. For the 2010 - 2011 academic year, 5 projects were approved. These projects are in the areas of mechanical and electrical hardware design and optimization, fault prediction and extra planetary civil site preparation. This work summarizes the projects, describes the student teams performing the work, and comments on the integration of Systems Engineering principles into the projects, as well as the affected course curriculums.

NBS computerized carpool matching system: users' guide. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilsinn, J.F.; Landau, S.

1974-12-01

The report includes flowcharts, input/output formats, and program listings for the programs, plus details of the manual process for coordinate coding. The matching program produces, for each person desiring it, a list of others residing within a pre-specified distance of him, and is thus applicable to a single work destination having primarily one work schedule. The system is currently operational on the National Bureau of Standards' UNIVAC 1108 computer and was run in March of 1974, producing lists for about 950 employees in less than four minutes computer time. Subsequent maintenance of the system will be carried out by themore » NBS Management and Organization Division. (GRA)« less

Trauma and stress among older adults in the criminal justice system: a review of the literature with implications for social work.

PubMed

Maschi, Tina; Dennis, Kelly Sullivan; Gibson, Sandy; MacMillan, Thalia; Sternberg, Susan; Hom, Maryann

2011-05-01

The purpose of this article was to review the empirical literature that investigated trauma and stress among older adults in the criminal justice system. Nineteen journal articles published between 1988 and 2010 were identified and extracted via research databases and included mixed age samples of adjudicated older and younger adults (n = 11) or older adult only samples (n = 8). Findings revealed past and current trauma and stress, consequences and/or correlates, and internal and external coping resources among aging offenders. The implications and future directions for gerontological social work, research, and policy with older adults in the criminal justice system are advanced.

Advancing NASA's Satellite Control Capabilities: More than Just Better Technology

NASA Technical Reports Server (NTRS)

Smith, Danford

2008-01-01

This viewgraph presentation reviews the work of the Goddard Mission Services Evolution Center (GMSEC) in the development of the NASA's satellite control capabilities. The purpose of the presentation is to provide a quick overview of NASA's Goddard Space Flight Center and our approach to coordinating the ground system resources and development activities across many different missions. NASA Goddard's work in developing and managing the current and future space exploration missions is highlighted. The GMSEC, was established to to coordinate ground and flight data systems development and services, to create a new standard ground system for many missions and to reflect the reality that business reengineering and mindset were just as important.

Effective Decision Maker-Scientist Engagement:Climate Change Vulnerability Analysis of California's Water System to Using Decision Scaling.

NASA Astrophysics Data System (ADS)

Schwarz, A. M.; Ray, P.; Brown, C.; Wi, S.

2016-12-01

For nearly 2 years the California Department of Water Resources (CDWR) has been working with the University of Massachusetts Amherst (UMass) to evaluate climate change vulnerabilities to the California State Water Project. Working cooperatively, the team has developed tools and methods to employ a decision scaling approach to CDWR's existing water system model (CalSim-II/CalLite 3.0). This presentation will discuss how and why this partnership came to be, the co-production model the team has developed to share expertise, the new understanding of the system that has been gained through the process, and current and future efforts to influence planning and investments based on the findings of the work. This cooperative decision-maker-with-scientist engagement is unique in that CDWR has not outsourced the application of the science to their systems, and instead has worked directly with UMass researchers to develop the process, produce results, and interpret findings. Further, CDWR staff has worked with UMass researchers to present results in ways that are more useable and actionable for decision-makers. As will be shown, many of these graphics allow the team to use the science differently to improve decision making.

IMASIS computer-based medical record project: dealing with the human factor.

PubMed

Martín-Baranera, M; Planas, I; Palau, J; Sanz, F

1995-01-01

The Institut Municipal d'Assistència Sanitària (IMAS) is a health care organization in Barcelona, comprising two general hospitals, a psychiatric hospital, a surgical clinic, a geriatric center, some primary care clinics, and a research institute. Since 1984, IMAS has been engaged in creating a multicenter integrated hospital information system (IMASIS). Currently, IMASIS offers the possibility to manage administrative data, laboratory results, pathology and cytology reports, radiology reports, and pharmacy inpatient orders; it also shares this information on-line among IMAS centers. IMASIS users may also work with a word processor, a spreadsheet, a database, or a statistical package and have access to MEDLINE. A second phase of IMASIS development began in December 1993 focused on clinical information management. The goal was to move towards an integrated multimedia medical record [1]. As a first step, the implementation experiences of the most advanced hospital information systems around the world were studied. Some of these experiences detected behavioral, cultural, and organizational factors [2] as the main sources of delay, or even failure, in HIS projects. A preliminary analysis to define such factors, assess their potential impact, and introduce adequate measures to deal with them seemed unavoidable before structuring of the project. In our approach to physician attitudes analysis, two survey techniques were applied. First, every hospital service head was contacted to schedule an interview, with either a service representative or a group of staff physicians and residents. The aim was to provide detailed information about project objectives and collect personal opinions, problems encountered in the current HIS, and specific needs of every medical and surgical specialty (including imaging needs). Every service head was asked to distribute a questionnaire among all clinicians, which assessed frequency of use of IMASIS current applications, user's satisfaction level, problems to be solved in utilization of the system, errors detected in the systems' database, and the personal interest in participating in the IMASIS project. The questionnaire was also intended to be a tool to monitor IMASIS evolution. Our study showed that medical staff had a lack of information about the current HIS, leading to a poor utilization of some system options. Another major characteristic, related to the above, was the feeling that the project would negatively affect the organization of work at the hospitals. A computer-based medical record was feared to degrade physician-patient relationship, introduce supplementary administrative burden in clinicians day-to-day work, unnecessarily slow history taking, and imply too-rigid patterns of work. The most frequent problems in using the current system could be classified into two groups: problems related to lack of agility and consistency in user interface design, and those derived from lack of a common patient identification number. Duplication of medical records was the most frequent error detected by physicians. Analysis of physicians' attitudes towards IMASIS revealed a lack of confidence globally. This was probably the consequence of two current features: a lack of complete information about IMASIS possibilities and problems faced when using the system. To deal with such factors, three types of measures have been planned. First, an effort is to be done to ensure that every physician is able to adequately use the current system and understands long-term benefits of the project. This task will be better accomplished by personal interaction between clinicians and a physician from the Informatics Department than through formal teaching of IMASIS. Secondly, a protocol for evaluating the HIS is being developed and will be systematically applied to detect both database errors and systemUs design pitfalls. Finally, the IMASIS project has to find a convenient point for starting, to offer short-term re

SynchroPhasor Measurements: System Architecture and Performance Evaluation in Supporting Wide-Area Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Zhenyu; Dagle, Jeffery E.

2008-07-31

The infrastructure of phasor measurements have evolved over the last two decades from isolated measurement units to networked measurement systems with footprints beyond individual utility companies. This is, to a great extent, a bottom-up self-evolving process except some local systems built by design. Given the number of phasor measurement units (PMUs) in the system is small (currently 70 each in western and eastern interconnections), current phasor network architecture works just fine. However, the architecture will become a bottleneck when large number of PMUs are installed (e.g. >1000~10000). The need for phasor architecture design has yet to be addressed. This papermore » reviews the current phasor networks and investigates future architectures, as related to the efforts undertaken by the North America SynchroPhasor Initiative (NASPI). Then it continues to present staged system tests to evaluate the performance of phasor networks, which is a common practice in the Western Electricity Coordinating Council (WECC) system. This is followed by field measurement evaluation and the implication of phasor quality issues on phasor applications.« less

Tracking the course of the manufacturing process in selective laser melting

NASA Astrophysics Data System (ADS)

Thombansen, U.; Gatej, A.; Pereira, M.

2014-02-01

An innovative optical train for a selective laser melting based manufacturing system (SLM) has been designed under the objective to track the course of the SLM process. In this, the thermal emission from the melt pool and the geometric properties of the interaction zone are addressed by applying a pyrometer and a camera system respectively. The optical system is designed such that all three radiations from processing laser, thermal emission and camera image are coupled coaxially and that they propagate on the same optical axis. As standard f-theta lenses for high power applications inevitably lead to aberrations and divergent optical axes for increasing deflection angles in combination with multiple wavelengths, a pre-focus system is used to implement a focusing unit which shapes the beam prior to passing the scanner. The sensor system records synchronously the current position of the laser beam, the current emission from the melt pool and an image of the interaction zone. Acquired data of the thermal emission is being visualized after processing which allows an instant evaluation of the course of the process at any position of each layer. As such, it provides a fully detailed history of the product This basic work realizes a first step towards self-optimization of the manufacturing process by providing information about quality relevant events during manufacture. The deviation from the planned course of the manufacturing process to the actual course of the manufacturing process can be used to adapt the manufacturing strategy from one layer to the next. In the current state, the system can be used to facilitate the setup of the manufacturing system as it allows identification of false machine settings without having to analyze the work piece.

Report on Financing the New Model of Family Medicine

PubMed Central

Spann, Stephen J.

2004-01-01

PURPOSE To foster redesigning the work and workplaces of family physicians, this Future of Family Medicine task force was created to formulate and recommend a financial model that sustains and promotes a thriving New Model of care by focusing on practice reimbursement and health care finances. The goals of the task force were to develop a financial model that assesses the impact of the New Model on practice finances, and to recommend health care financial policies that, if implemented, would be expected to promote the New Model and the primary medical care function in the United States for the next few decades. METHODS The members of the task force reflected a wide range of professional backgrounds and expertise. The group met in person on 2 occasions and communicated by e-mail and conference calls to achieve consensus. A marketing study was carried out using focus groups to test the concept of the New Model with consumers. External consultants with expertise in health economics, health care finance, health policy, and practice management were engaged to assist the task force with developing the microeconomic (practice level) and macroeconomic (societal level) financial models necessary to achieve its goals. Model assumptions were derived from the published medical literature, existing practice management databases, and discussions with experienced physicians and other content experts. The results of the financial modeling exercise are included in this report. The initial draft report of the findings and recommendations was shared with a reactor panel representing a broad spectrum of constituencies. Feedback from these individuals was reviewed and incorporated, as appropriate, into the final report. RESULTS The practice-level financial model suggests that full implementation of the New Model of care within the current fee-for-service system of reimbursement would result in a 26% increase in compensation (from $167,457 to $210,288 total annual compensation) for prototypical family physicians who maintain their current number of work hours. Alternatively, physicians could choose to decrease their work hours by 12% and maintain their current compensation. This result is sensitive to physician practice group size. The societal level financial model shows that modifications in the current reimbursement system could lead to further improvements in compensation for family physicians practicing the New Model of care. Reimbursement for e-visits and chronic disease management could further increase total annual compensation to $229,849 for prototypical family physicians maintaining their current number of work hours. The widespread introduction of quality-based physician incentive bonus payments similar to some current programs that have been implemented on a limited basis could further increase total annual compensation up to $254,500. The adoption of a mixed reimbursement model, which would add an annual per-patient fee, a chronic care bonus, and an overall performance bonus to the current reimbursement system, could increase total annual compensation for the prototypical family physician continuing the current number of hours worked to as much as $277,800, a 66% increase above current compensation levels. The cost of transition to the New Model is estimated to range from $23,442 to $90,650 per physician, depending on the assumed magnitude of productivity loss associated with implementing an electronic health record. The financial impact of enhanced use of primary care on the costs of health care in the United States was estimated. If every American used a primary care physician as their usual source of care, health care costs would likely decrease by 5.6%, resulting in national savings of $67 billion dollars per year, with an improvement in the quality of the health care provided. CONCLUSIONS Family physicians could use New Model efficiency to increase compensation or to reduce work time. There are alternative reimbursement methodologies compatible with the New Model that would allow family physicians to share in the health care cost savings achieved as a result of effective and efficient delivery of care. The New Model of care should enhance health care while propelling the US system toward improved performance and results that are satisfying to patients, health care professionals, purchasers, and payers. The New Model needs to be implemented now. Given the recognized need for improvements in the US health care system in the areas of quality, safety, access and costs, there is no reason to delay. PMID:15654084

Report on financing the new model of family medicine.

PubMed

Spann, Stephen J

2004-12-02

To foster redesigning the work and workplaces of family physicians, this Future of Family Medicine task force was created to formulate and recommend a financial model that sustains and promotes a thriving New Model of care by focusing on practice reimbursement and health care finances. The goals of the task force were to develop a financial model that assesses the impact of the New Model on practice finances, and to recommend health care financial policies that, if implemented, would be expected to promote the New Model and the primary medical care function in the United States for the next few decades. The members of the task force reflected a wide range of professional backgrounds and expertise. The group met in person on 2 occasions and communicated by e-mail and conference calls to achieve consensus. A marketing study was carried out using focus groups to test the concept of the New Model with consumers. External consultants with expertise in health economics, health care finance, health policy, and practice management were engaged to assist the task force with developing the microeconomic (practice level) and macroeconomic (societal level) financial models necessary to achieve its goals. Model assumptions were derived from the published medical literature, existing practice management databases, and discussions with experienced physicians and other content experts. The results of the financial modeling exercise are included in this report. The initial draft report of the findings and recommendations was shared with a reactor panel representing a broad spectrum of constituencies. Feedback from these individuals was reviewed and incorporated, as appropriate, into the final report. The practice-level financial model suggests that full implementation of the New Model of care within the current fee-for-service system of reimbursement would result in a 26% increase in compensation (from 167,457 dollars to 210,288 dollars total annual compensation) for prototypical family physicians who maintain their current number of work hours. Alternatively, physicians could choose to decrease their work hours by 12% and maintain their current compensation. This result is sensitive to physician practice group size. The societal level financial model shows that modifications in the current reimbursement system could lead to further improvements in compensation for family physicians practicing the New Model of care. Reimbursement for e-visits and chronic disease management could further increase total annual compensation to 229,849 dollars for prototypical family physicians maintaining their current number of work hours. The widespread introduction of quality-based physician incentive bonus payments similar to some current programs that have been implemented on a limited basis could further increase total annual compensation up to 254,500 dollars. The adoption of a mixed reimbursement model, which would add an annual per-patient fee, a chronic care bonus, and an overall performance bonus to the current reimbursement system, could increase total annual compensation for the prototypical family physician continuing the current number of hours worked to as much as 277,800 dollars, a 66% increase above current compensation levels. The cost of transition to the New Model is estimated to range from 23,442 dollars to 90,650 dollars per physician, depending on the assumed magnitude of productivity loss associated with implementing an electronic health record. The financial impact of enhanced use of primary care on the costs of health care in the United States was estimated. If every American used a primary care physician as their usual source of care, health care costs would likely decrease by 5.6%, resulting in national savings of 67 billion dollars per year, with an improvement in the quality of the health care provided. Family physicians could use New Model efficiency to increase compensation or to reduce work time. There are alternative reimbursement methodologies compatible with the New Model that would allow family physicians to share in the health care cost savings achieved as a result of effective and efficient delivery of care. The New Model of care should enhance health care while propelling the US system toward improved performance and results that are satisfying to patients, health care professionals, purchasers, and payers. The New Model needs to be implemented now. Given the recognized need for improvements in the US health care system in the areas of quality, safety, access and costs, there is no reason to delay.

Federalism and social justice: implications for social work.

PubMed

Linhorst, Donald M

2002-07-01

Federalism is a system of government that divides power between two or more levels of government. During the current conservative political climate in the United States, power has shifted increasingly from the federal government to states, a move that has implications for the achievement of social justice. Consequently, it is now necessary for social workers to engage in political activity at the state and local levels, in addition to the federal level, to promote social justice. Implications for social work policy practice, research, and education for advancing social justice within the federal system of government are explored.

A Computational Architecture for Programmable Automation Research

NASA Astrophysics Data System (ADS)

Taylor, Russell H.; Korein, James U.; Maier, Georg E.; Durfee, Lawrence F.

1987-03-01

This short paper describes recent work at the IBM T. J. Watson Research Center directed at developing a highly flexible computational architecture for research on sensor-based programmable automation. The system described here has been designed with a focus on dynamic configurability, layered user inter-faces and incorporation of sensor-based real time operations into new commands. It is these features which distinguish it from earlier work. The system is cur-rently being implemented at IBM for research purposes and internal use and is an outgrowth of programmable automation research which has been ongoing since 1972 [e.g., 1, 2, 3, 4, 5, 6] .

Predictive and Neural Predictive Control of Uncertain Systems

NASA Technical Reports Server (NTRS)

Kelkar, Atul G.

2000-01-01

Accomplishments and future work are:(1) Stability analysis: the work completed includes characterization of stability of receding horizon-based MPC in the setting of LQ paradigm. The current work-in-progress includes analyzing local as well as global stability of the closed-loop system under various nonlinearities; for example, actuator nonlinearities; sensor nonlinearities, and other plant nonlinearities. Actuator nonlinearities include three major types of nonlineaxities: saturation, dead-zone, and (0, 00) sector. (2) Robustness analysis: It is shown that receding horizon parameters such as input and output horizon lengths have direct effect on the robustness of the system. (3) Code development: A matlab code has been developed which can simulate various MPC formulations. The current effort is to generalize the code to include ability to handle all plant types and all MPC types. (4) Improved predictor: It is shown that MPC design using better predictors that can minimize prediction errors. It is shown analytically and numerically that Smith predictor can provide closed-loop stability under GPC operation for plants with dead times where standard optimal predictor fails. (5) Neural network predictors: When neural network is used as predictor it can be shown that neural network predicts the plant output within some finite error bound under certain conditions. Our preliminary study shows that with proper choice of update laws and network architectures such bound can be obtained. However, much work needs to be done to obtain a similar result in general case.

Opening up mental health service delivery to cultural diversity: current situation, development and examples from three northern European countries.

PubMed

Bäärnhielm, Sofie; Jávo, Cecilie; Mösko, Mike-Oliver

2013-01-01

There are inequalities in health among migrants and local populations in Europe. Due to migration, Germany, Norway and Sweden have become ethnic culturally diverse nations. There are barriers to mental health care access for refugees, migrants and minorities, and problems with quality of culturally sensitive care in the three countries. This is despite tax-funded health care systems based on equity in service provision. There is a need to develop culturally sensitive mental health services that respond to the increasing diversity of the populations. In this chapter, we will take a closer look at cultural diversity in the countries in question, discuss challenges and give examples of current work to open up mental health services to cultural diversity. The German example will focus on the movement of Interkulturelle Öffnung (cross-cultural opening of the health care system) and work on creating national guidelines and quality standards. From Norway, the work of the National Centre for Mental Health for the indigenous Sámi population will be presented. The Swedish example will focus on the work carried out by the Transcultural Centre. The latter is a competence centre supporting development of culturally sensitive care as an integrated part of the regional health and mental health care system in Stockholm. Finally, the relevance of mental health care for a culturally diverse population, as a part of the larger social project of building tolerant multicultural societies, will be discussed. Copyright © 2013 S. Karger AG, Basel.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan Hruska

Currently, small Unmanned Aerial Vehicles (UAVs) are primarily used for capturing and down-linking real-time video. To date, their role as a low-cost airborne platform for capturing high-resolution, georeferenced still imagery has not been fully utilized. On-going work within the Unmanned Vehicle Systems Program at the Idaho National Laboratory (INL) is attempting to exploit this small UAV-acquired, still imagery potential. Initially, a UAV-based still imagery work flow model was developed that includes initial UAV mission planning, sensor selection, UAV/sensor integration, and imagery collection, processing, and analysis. Components to support each stage of the work flow are also being developed. Critical tomore » use of acquired still imagery is the ability to detect changes between images of the same area over time. To enhance the analysts’ change detection ability, a UAV-specific, GIS-based change detection system called SADI or System for Analyzing Differences in Imagery is under development. This paper will discuss the associated challenges and approaches to collecting still imagery with small UAVs. Additionally, specific components of the developed work flow system will be described and graphically illustrated using varied examples of small UAV-acquired still imagery.« less

Studies and optimization of Pohang Light Source-II superconducting radio frequency system at stable top-up operation with beam current of 400 mA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joo, Youngdo, E-mail: Ydjoo77@postech.ac.kr; Yu, Inha; Park, Insoo

After three years of upgrading work, the Pohang Light Source-II (PLS-II) is now successfully operating. The final quantitative goal of PLS-II is a top-up user-service operation with beam current of 400 mA to be completed by the end of 2014. During the beam store test up to 400 mA in the storage ring (SR), it was observed that the vacuum pressure around the radio frequency (RF) window of the superconducting cavity rapidly increases over the interlock level limiting the availability of the maximum beam current storing. Although available beam current is enhanced by setting a higher RF accelerating voltage, it is bettermore » to keep the RF accelerating voltage as low as possible in the long time top-up operation. We investigated the cause of the window vacuum pressure increment by studying the changes in the electric field distribution at the superconducting cavity and waveguide according to the beam current. In our simulation, an equivalent physical modeling was developed using a finite-difference time-domain code. The simulation revealed that the electric field amplitude at the RF window is exponentially increased as the beam current increases, thus this high electric field amplitude causes a RF breakdown at the RF window, which comes with the rapid increase of window vacuum pressure. The RF accelerating voltage of PLS-II RF system was set to 4.95 MV, which was estimated using the maximum available beam current that works as a function of RF voltage, and the top-up operation test with the beam current of 400 mA was successfully carried out.« less

Generic dynamical phase transition in one-dimensional bulk-driven lattice gases with exclusion

NASA Astrophysics Data System (ADS)

Lazarescu, Alexandre

2017-06-01

Dynamical phase transitions are crucial features of the fluctuations of statistical systems, corresponding to boundaries between qualitatively different mechanisms of maintaining unlikely values of dynamical observables over long periods of time. They manifest themselves in the form of non-analyticities in the large deviation function of those observables. In this paper, we look at bulk-driven exclusion processes with open boundaries. It is known that the standard asymmetric simple exclusion process exhibits a dynamical phase transition in the large deviations of the current of particles flowing through it. That phase transition has been described thanks to specific calculation methods relying on the model being exactly solvable, but more general methods have also been used to describe the extreme large deviations of that current, far from the phase transition. We extend those methods to a large class of models based on the ASEP, where we add arbitrary spatial inhomogeneities in the rates and short-range potentials between the particles. We show that, as for the regular ASEP, the large deviation function of the current scales differently with the size of the system if one considers very high or very low currents, pointing to the existence of a dynamical phase transition between those two regimes: high current large deviations are extensive in the system size, and the typical states associated to them are Coulomb gases, which are highly correlated; low current large deviations do not depend on the system size, and the typical states associated to them are anti-shocks, consistently with a hydrodynamic behaviour. Finally, we illustrate our results numerically on a simple example, and we interpret the transition in terms of the current pushing beyond its maximal hydrodynamic value, as well as relate it to the appearance of Tracy-Widom distributions in the relaxation statistics of such models. , which features invited work from the best early-career researchers working within the scope of J. Phys. A. This project is part of the Journal of Physics series’ 50th anniversary celebrations in 2017. Alexandre Lazarescu was selected by the Editorial Board of J. Phys. A as an Emerging Talent.

Magnetic field effects on the vestibular system: calculation of the pressure on the cupula due to ionic current-induced Lorentz force

NASA Astrophysics Data System (ADS)

Antunes, A.; Glover, P. M.; Li, Y.; Mian, O. S.; Day, B. L.

2012-07-01

Large static magnetic fields may be employed in magnetic resonance imaging (MRI). At high magnetic field strengths (usually from about 3 T and above) it is possible for humans to perceive a number of effects. One such effect is mild vertigo. Recently, Roberts et al (2011 Current Biology 21 1635-40) proposed a Lorentz-force mechanism resulting from the ionic currents occurring naturally in the endolymph of the vestibular system. In the present work a more detailed calculation of the forces and resulting pressures in the vestibular system is carried out using a numerical model. Firstly, realistic 3D finite element conductivity and fluid maps of the utricle and a single semi-circular canal containing the current sources (dark cells) and sinks (hair cells) of the utricle and ampulla were constructed. Secondly, the electrical current densities in the fluid are calculated. Thirdly, the developed Lorentz force is used directly in the Navier-Stokes equation and the trans-cupular pressure is computed. Since the driving force field is relatively large in comparison with the advective acceleration, we demonstrate that it is possible to perform an approximation in the Navier-Stokes equations that reduces the problem to solving a simpler Poisson equation. This simplification allows rapid and easy calculation for many different directions of applied magnetic field. At 7 T a maximum cupula pressure difference of 1.6 mPa was calculated for the combined ampullar (0.7 µA) and utricular (3.31 µA) distributed current sources, assuming a hair-cell resting current of 100 pA per unit. These pressure values are up to an order of magnitude lower than those proposed by Roberts et al using a simplistic model and calculation, and are in good agreement with the estimated pressure values for nystagmus velocities in caloric experiments. This modeling work supports the hypothesis that the Lorentz force mechanism is a significant contributor to the perception of magnetic field induced vertigo.

Advantages and Uses of AMTEC

NASA Astrophysics Data System (ADS)

Lodhi, M. A. K.

2012-10-01

Static conversion systems are gaining importance in recent times because of newer applications of electricity like in spacecraft, hybrid-electric vehicles, military uses and domestic purposes. Of the many new static energy conversion systems that are being considered, one is the Alkali Metal Thermal Electric Converter (AMTEC). It is a thermally regenerative, electrochemical device for the direct conversion of heat to electrical power. As the name suggests, this system uses an alkali metal in its process. The electrochemical process involved in the working of AMTEC is ionization of alkali metal atoms at the interface of electrode and electrolyte. The electrons produced as a result flow through the external load thus doing work, and finally recombine with the metal ions at the cathode. AMTECs convert the work done during the nearly isothermal expansion of metal vapor to produce a high current and low voltage electron flow. Due to its principle of working it has many inherent advantages over other conventional generators. These will be discussed briefly.

Designing for Annual Spacelift Performance

NASA Technical Reports Server (NTRS)

McCleskey, Carey M.; Zapata, Edgar

2017-01-01

This paper presents a methodology for approaching space launch system design from a total architectural point of view. This different approach to conceptual design is contrasted with traditional approaches that focus on a single set of metrics for flight system performance, i.e., payload lift per flight, vehicle mass, specific impulse, etc. The approach presented works with a larger set of metrics, including annual system lift, or "spacelift" performance. Spacelift performance is more inclusive of the flight production capability of the total architecture, i.e., the flight and ground systems working together as a whole to produce flights on a repeated basis. In the proposed methodology, spacelift performance becomes an important design-for-support parameter for flight system concepts and truly advanced spaceport architectures of the future. The paper covers examples of existing system spacelift performance as benchmarks, points out specific attributes of space transportation systems that must be greatly improved over these existing designs, and outlines current activity in this area.

Non-equilibrium assembly of microtubules: from molecules to autonomous chemical robots.

PubMed

Hess, H; Ross, Jennifer L

2017-09-18

Biological systems have evolved to harness non-equilibrium processes from the molecular to the macro scale. It is currently a grand challenge of chemistry, materials science, and engineering to understand and mimic biological systems that have the ability to autonomously sense stimuli, process these inputs, and respond by performing mechanical work. New chemical systems are responding to the challenge and form the basis for future responsive, adaptive, and active materials. In this article, we describe a particular biochemical-biomechanical network based on the microtubule cytoskeletal filament - itself a non-equilibrium chemical system. We trace the non-equilibrium aspects of the system from molecules to networks and describe how the cell uses this system to perform active work in essential processes. Finally, we discuss how microtubule-based engineered systems can serve as testbeds for autonomous chemical robots composed of biological and synthetic components.

Real time test bed development for power system operation, control and cyber security

NASA Astrophysics Data System (ADS)

Reddi, Ram Mohan

The operation and control of the power system in an efficient way is important in order to keep the system secure, reliable and economical. With advancements in smart grid, several new algorithms have been developed for improved operation and control. These algorithms need to be extensively tested and validated in real time before applying to the real electric power grid. This work focuses on the development of a real time test bed for testing and validating power system control algorithms, hardware devices and cyber security vulnerability. The test bed developed utilizes several hardware components including relays, phasor measurement units, phasor data concentrator, programmable logic controllers and several software tools. Current work also integrates historian for power system monitoring and data archiving. Finally, two different power system test cases are simulated to demonstrate the applications of developed test bed. The developed test bed can also be used for power system education.

Embedding CLIPS in a database-oriented diagnostic system

NASA Technical Reports Server (NTRS)

Conway, Tim

1990-01-01

This paper describes the integration of C Language Production Systems (CLIPS) into a powerful portable maintenance aid (PMA) system used for flightline diagnostics. The current diagnostic target of the system is the Garrett GTCP85-180L, a gas turbine engine used as an Auxiliary Power Unit (APU) on some C-130 military transport aircraft. This project is a database oriented approach to a generic diagnostic system. CLIPS is used for 'many-to-many' pattern matching within the diagnostics process. Patterns are stored in database format, and CLIPS code is generated by a 'compilation' process on the database. Multiple CLIPS rule sets and working memories (in sequence) are supported and communication between the rule sets is achieved via the export and import commands. Work is continuing on using CLIPS in other portions of the diagnostic system and in re-implementing the diagnostic system in the Ada language.

"The effects of the frequency and waveform of the activating current on physiochemical oxidation of organic wastes," Yegor Morozov et al.

NASA Astrophysics Data System (ADS)

Nelson, Mark

2015-04-01

This paper reports work on the optimization of energy usage in a promising approach to increasing cycling of key nutrients in space bioregenerative life support systems (BLSS). The work comes from researchers at the Institute of Biophysics, Krasnoyarsk who have since their landmark BLSS test bed, Bios-3, continued to advance the field. They have been working on methods to return the key components of human waste products and inedible biomass to biotic availability in the system. The approach uses wet oxidation with hydrogen peroxide (H2O2) powered by an alternating electric current. Previous research has demonstrated that the hydrogen peroxide can be generated within a BLSS and that the liquid and gas products of the wet oxidation can be used to grow food crops without any loss of productivity. The paper reports that at the beginning of organic waste processing by this method, reaction rates are doubled using 35 Hz meander current compared to 50 Hz sinusoidal current (Fig. 1). This represents a 17-18% reduction in energy consumption. A possible explanation for this finding is that meander current involves sharp alternations in current, as opposed to the smoother variations in sinusoidal currents, which results in greater breakdown of H2O2 into the OH- radical which is responsible for most breakdown of organic wastes. When long-term (30 day) oxidation is evaluated, there is little difference between the tested variations of the activating current due to the overall increase in the number of radicals. But long-term oxidation and storage may be inadvisable in the rapidly cycling BLSS due to increased production of potentially hazardous gaseous by-products such as ammonia, volatile organic compounds, and hydrogen peroxide vapor. These problematic byproducts are minimized if the wet oxidation is done quickly and if smaller amounts of organic materials are processed at a time. The authors note that limits in efficiency of using hydrogen peroxide have not been reached as some of it breaks down into hydrogen and oxygen (H2 and O2) which are not effective in organic matter reactions. They suggest efficiency may be increased in further research through experiments with smaller amounts of hydrogen peroxide combined with tighter controls of reaction rates while trying varying voltages. The paper is significant as it advances the development of bioregenerative life support systems by increasing degree of closure by fuller recycling of nutrients and minimizing energy needs, a limiting factor in any space applications. Improving both factors makes BLSS systems more efficient and competitive with other approaches for space life support.

Effectiveness of Pavement Management System and its Effects to the Closing of Final Account in Construction Project in Malaysia

NASA Astrophysics Data System (ADS)

Zakaria, Zarabizan; Ismail, Syuhaida; Yusof, Aminah Md

2013-04-01

Federal roads maintenance needs a systematic and effective mechanism to ensure that the roads are in good condition and provide comfort to the road user. In implementing effective maintenance, budget is main the factor limiting this endeavor. Thus Public Works Department (PWD) Malaysia used Highway Development and Management (HDM-4) System to help the management of PWD Malaysia in determining the location and length of the road to be repaired according to the priority based on its analysis. For that purpose, PWD Malaysia has applied Pavement Management System (PMS) which utilizes HDM-4 as the analysis engine to conduct technical and economic analysis in generating annual work programs for pavement maintenance. As a result, a lot of feedback and comment have been received from Supervisory and Roads Maintenance Unit (UPPJ) Zonal on the accuracy of the system output and problems that arise in the closing of final account. Therefore, the objective of this paper is to evaluate current system accuracy in terms of generating the annual work program for periodic pavement maintenance, to identify factors contributing to the system inaccuracy in selecting the location and length of roads that require for treatment and to propose improvement measures for the system accuracy. The factors affecting the closing of final account caused by result received from the pavement management system are also defined. The scope of this paper is on the existing HDM-4 System which cover four states specifically Perlis, Selangor, Kelantan and Johor which is analysed via the work program output data for the purpose of evaluating the system accuracy. The method used in this paper includes case study, interview, discussion and analysis of the HDM-4 System output data. This paper has identified work history not updated and the analysis is not using the current data as factors contributing to the system accuracy. From the result of this paper, it is found that HDM-4's system accuracy used by PWD Malaysia attains average 65 per cent only and had not achieved level that had been set by PWD Malaysia namely 80 per cent. Hence, this paper has revealed the causes of the occurrances in the pavement management system in construction project in Malaysia and investigated the consequences of the late payments and final account problems confronted by contractors in Malaysia, which eventually proposed strategic actions that could be taken by the contractors in securing their payments.

Majorana ϕ0-junction in a disordered spin-orbit coupling nanowire with tilted magnetic field

NASA Astrophysics Data System (ADS)

Huang, Hong; Liang, Qi-Feng; Yao, Dao-Xin; Wang, Zhi

2017-12-01

Majorana Josephson junctions in nanowire systems exhibit a pseudo-4π period current-phase relation in the clean limit. In this work, we study how this current-phase relation responds to a tilted magnetic field in a disordered Majorana Josephson junction within the Bogoliubov-de Gennes approach. We show that the tilted magnetic field induces a ϕ0 phase shift to the current-phase relation. Most importantly, we find that this ϕ0-junction behavior is robust even in the presence of disorders.

Reduction of Carbon Footprint and Energy Efficiency Improvement in Aluminum Production by Use of Novel Wireless Instrumentation Integrated with Mathematical Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

James W. Evans

2012-04-11

The work addressed the greenhouse gas emission and electrical energy consumption of the aluminum industry. The objective was to provide a means for reducing both through the application of wireless instrumentation, coupled to mathematical modeling. Worldwide the aluminum industry consumes more electrical energy than all activities in many major countries (e.g. the UK) and emits more greenhouse gasses (e.g. than France). Most of these excesses are in the 'primary production' of aluminum; that is the conversion of aluminum oxide to metal in large electrolytic cells operating at hundreds of thousands of amps. An industry-specific GHG emission has been the focusmore » of the work. The electrolytic cells periodically, but at irregular intervals, experience an upset condition known as an 'anode effect'. During such anode effects the cells emit fluorinated hydrocarbons (PFCs, which have a high global warming potential) at a rate far greater than in normal operation. Therefore curbing anode effects will reduce GHG emissions. Prior work had indicated that the distribution of electrical current within the cell experiences significant shifts in the minutes before an anode effect. The thrust of the present work was to develop technology that could detect and report this early warning of an anode effect so that the control computer could minimize GHG emissions. A system was developed to achieve this goal and, in collaboration with Alcoa, was tested on two cells at an Alcoa plant in Malaga, Washington. The project has also pointed to the possibility of additional improvements that could result from the work. Notable among these is an improvement in efficiency that could result in an increase in cell output at little extra operating cost. Prospects for commercialization have emerged in the form of purchase orders for further installations. The work has demonstrated that a system for monitoring the current of individual anodes in an aluminum cell is practical. Furthermore the system has been installed twice on a smelter in the US without exposing workers to hazards usually associated with running signal wires in aluminum plants. The results display the early warning of an anode effect that potentially can be used to minimize such anode effects with their excessive GHG emissions. They also point to a possible, but substantial, economic benefit that could result in improved current efficiency by anode adjustment based on individual anode current measurements.« less

Goal-Directed Decision Making as Probabilistic Inference: A Computational Framework and Potential Neural Correlates

ERIC Educational Resources Information Center

Solway, Alec; Botvinick, Matthew M.

2012-01-01

Recent work has given rise to the view that reward-based decision making is governed by two key controllers: a habit system, which stores stimulus-response associations shaped by past reward, and a goal-oriented system that selects actions based on their anticipated outcomes. The current literature provides a rich body of computational theory…

An MIS Framework for Analyzing the Organizational Impact of Management Information Systems Projects.

DTIC Science & Technology

1981-06-01

Egan 9. 0090004161110 ORGANIZATIO" NAME AND A00111O6 ii. PRGRAM ELEMEN19T. PROJEICT. TASK RA a WORK UNIT wumEs M Naval Postgraduate School Monterey... prevent fur- ther system use for the current task, should be avoided. Excep- tion listings/error flagging routines would increase the users’ perception of a

The Rating System of the Rural School Pupils' Assessment of the Republic of Kazakhstan

ERIC Educational Resources Information Center

Bibigul, Almurzayeva; Orynkul, Shunkeyeva; Lyudmila, Karavanova; Aelita, Sagiyeva

2015-01-01

Currently, comprehensive school teachers of the Republic of Kazakhstan pay special attention to assessment system of pupils' knowledge based on personally oriented approach. In work "A black box: what there inside? An assessment of knowledge of pupils as a way of increase of efficiency of teaching and educational process" P. Blek and D.…

Equity Implications of Methods of Funding State Teachers' Retirement Systems. Working Paper in Education Finance No. 30.

ERIC Educational Resources Information Center

Wendling, Wayne

Current methods of funding teachers' retirement systems, which base pensions on final salaries, are inequitable because they are not related to school districts' ability to pay and because they require some teachers to subsidize others. A five-state survey shows it is common for pensions to be funded by school districts and teachers, sometimes…

Evaluation of a multi-sensor machine vision system for automated hardwood lumber grading

Treesearch

D. Earl Kline; Chris Surak; Philip A. Araman

2000-01-01

Over the last 10 years, scientists at the Thomas M. Brooks Forest Products Center, the Bradley Department of Electrical Engineering, and the USDA Forest Service have been working on lumber scanning systems that can accurately locate and identify defects in hardwood lumber. Current R&D efforts are targeted toward developing automated lumber grading technologies. The...

Semantic Likelihood Models for Bayesian Inference in Human-Robot Interaction

NASA Astrophysics Data System (ADS)

Sweet, Nicholas

Autonomous systems, particularly unmanned aerial systems (UAS), remain limited in au- tonomous capabilities largely due to a poor understanding of their environment. Current sensors simply do not match human perceptive capabilities, impeding progress towards full autonomy. Recent work has shown the value of humans as sources of information within a human-robot team; in target applications, communicating human-generated 'soft data' to autonomous systems enables higher levels of autonomy through large, efficient information gains. This requires development of a 'human sensor model' that allows soft data fusion through Bayesian inference to update the probabilistic belief representations maintained by autonomous systems. Current human sensor models that capture linguistic inputs as semantic information are limited in their ability to generalize likelihood functions for semantic statements: they may be learned from dense data; they do not exploit the contextual information embedded within groundings; and they often limit human input to restrictive and simplistic interfaces. This work provides mechanisms to synthesize human sensor models from constraints based on easily attainable a priori knowledge, develops compression techniques to capture information-dense semantics, and investigates the problem of capturing and fusing semantic information contained within unstructured natural language. A robotic experimental testbed is also developed to validate the above contributions.

Defending Against Advanced Persistent Threats Using Game-Theory.

PubMed

Rass, Stefan; König, Sandra; Schauer, Stefan

2017-01-01

Advanced persistent threats (APT) combine a variety of different attack forms ranging from social engineering to technical exploits. The diversity and usual stealthiness of APT turns them into a central problem of contemporary practical system security, since information on attacks, the current system status or the attacker's incentives is often vague, uncertain and in many cases even unavailable. Game theory is a natural approach to model the conflict between the attacker and the defender, and this work investigates a generalized class of matrix games as a risk mitigation tool for an advanced persistent threat (APT) defense. Unlike standard game and decision theory, our model is tailored to capture and handle the full uncertainty that is immanent to APTs, such as disagreement among qualitative expert risk assessments, unknown adversarial incentives and uncertainty about the current system state (in terms of how deeply the attacker may have penetrated into the system's protective shells already). Practically, game-theoretic APT models can be derived straightforwardly from topological vulnerability analysis, together with risk assessments as they are done in common risk management standards like the ISO 31000 family. Theoretically, these models come with different properties than classical game theoretic models, whose technical solution presented in this work may be of independent interest.

[Alcohol and work: the role of the company physician in the occupational health and safety management systems].

PubMed

Patussi, V; Muran, A

2010-01-01

The organization of safety in the working places and the increasing attention to behaviours and life styles of workers that may lead to increasing occupational risks are the pick innovative aspects of the recent changes in our country's legislation about occupational safety. In this organization, the role of the company physician is becoming more and more important and his work of evaluation beginning with the knowledge both of the working places and of the workers's lifestyles, is irreplaceable. His role in organizing the managing standards of occupational safety and health cannot be limited to health supervision but must be an essential element in risk assessment in the prevision of workplaces and of safe working conditions, in workers training and information, in organizing the control system of each business. The present paper examines--referring to the current regulation--the duties and functions of a company physician when facing the problems concerning the working risks tied to alcohol assumption.

Gravitational, erosional and sedimentary processes on volcanic ocean islands: Insights from the submarine morphology of Madeira archipelago

NASA Astrophysics Data System (ADS)

Quartau, R.; Ramalho, R.; Madeira, J.; Santos, R.; Rodrigues, A.; Roque, C.; Carrara, G.; da Silveira, A. B.

2017-12-01

In this work we report detailed observations of high-resolution bathymetric and backscatter mosaics of Madeira archipelago covering from the nearshore to the deep sea and relate them with the physical and geological setting of the islands. Our observations reveal that the submarine flanks of the archipelago are deeply dissected by large landslide scars and that most of them have involved subaerial material. Below the shelf break, landslide chutes develop downslope forming poorly defined depositional lobes. Around the islands, a large tributary system composed of gullies and channels develop where no significant rocky/ridge outcrops are present. This system is likely formed by turbidity currents that are triggered by hyperpicnal flows in Madeira or by storm-induced offshore sediment transport on Porto Santo and Desertas islands. At the lower part of the flanks (-3000 to -4300 m), where seafloor gradients decrease to 0.5º-3º, several scour and sediment wave fields are present, with the former normally occurring upslope of the latter. Sediment waves are often associated with the depositional lobes of the landslides but also occur offshore poorly-developed tributary systems. Sediment wave fields and scours are mostly absent on areas where the tributary systems are well developed and/or are dominated by rocky outcrops. Our study suggests that scours and sediment wave fields are probably formed by turbidity currents that suffer hydraulic jumps where the seafloor gradients are significantly reduced and where the currents become unconfined. The largest scours were found in areas without upslope channel systems and independently of wave fields, although also related to unconfined turbidity currents. Our observations show that tributary systems are better developed in prominent and rainy islands such as Madeira. On low and dry islands such as Porto Santo and Desertas, these are poorly developed and unconfined turbidite currents favour the development of scours and sediment wave fields. AcknowledgmentsThis work is funded by FCT-Fundação para a Ciência e a Tecnologia through the PLATMAR project (PTDC/GEO-GEO/0051/2014)

Nuclear Hybrid Energy Systems FY16 Modeling Efforts at ORNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cetiner, Sacit M.; Greenwood, Michael Scott; Harrison, Thomas J.

A nuclear hybrid system uses a nuclear reactor as the basic power generation unit. The power generated by the nuclear reactor is utilized by one or more power customers as either thermal power, electrical power, or both. In general, a nuclear hybrid system will couple the nuclear reactor to at least one thermal power user in addition to the power conversion system. The definition and architecture of a particular nuclear hybrid system is flexible depending on local markets needs and opportunities. For example, locations in need of potable water may be best served by coupling a desalination plant to themore » nuclear system. Similarly, an area near oil refineries may have a need for emission-free hydrogen production. A nuclear hybrid system expands the nuclear power plant from its more familiar central power station role by diversifying its immediately and directly connected customer base. The definition, design, analysis, and optimization work currently performed with respect to the nuclear hybrid systems represents the work of three national laboratories. Idaho National Laboratory (INL) is the lead lab working with Argonne National Laboratory (ANL) and Oak Ridge National Laboratory. Each laboratory is providing modeling and simulation expertise for the integration of the hybrid system.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jansen, F.

The use of integrated PET/MRI systems in clinical applications can best benefit from understanding their technological advances and limitations. The currently available clinical PET/MRI systems have their own characteristics. Thorough analyses of existing technical data and evaluation of necessary performance metrics for quality assurances could be conducted to optimize application-specific PET/MRI protocols. This Symposium will focus on technical advances and limitations of clinical PET/MRI systems, and how this exciting imaging modality can be utilized in applications that can benefit from both PET and MRI. Learning Objectives: To understand the technological advances of clinical PET/MRI systems To correctly identify clinical applicationsmore » that can benefit from PET/MRI To understand ongoing work to further improve the current PET/MRI technology Floris Jansen is a GE Healthcare employee.« less

An implantable thermoresponsive drug delivery system based on Peltier device.

PubMed

Yang, Rongbing; Gorelov, Alexander V; Aldabbagh, Fawaz; Carroll, William M; Rochev, Yury

2013-04-15

Locally dropping the temperature in vivo is the main obstacle to the clinical use of a thermoresponsive drug delivery system. In this paper, a Peltier electronic element is incorporated with a thermoresponsive thin film based drug delivery system to form a new drug delivery device which can regulate the release of rhodamine B in a water environment at 37 °C. Various current signals are used to control the temperature of the cold side of the Peltier device and the volume of water on top of the Peltier device affects the change in temperature. The pulsatile on-demand release profile of the model drug is obtained by turning the current signal on and off. The work has shown that the 2600 mAh power source is enough to power this device for 1.3 h. Furthermore, the excessive heat will not cause thermal damage in the body as it will be dissipated by the thermoregulation of the human body. Therefore, this simple novel device can be implanted and should work well in vivo. Copyright © 2013 Elsevier B.V. All rights reserved.

Family Registration Card as electronic medical carrier in Bosnia and Herzegovina.

PubMed

Novo, Ahmed; Masic, Izet; Toromanovic, Selim; Loncarevic, Nedim; Junuzovic, Dzelaludin; Dizdarevic, Jadranka

2004-01-01

Medical documentation is a very important part of the medical documentalistics and is occupies a large part of daily work of medical staff working in Primary Health Care. Paper documentation is going to be replaced by electronic cards in Bosnia and Herzegovina and a new Health Care System is under development, based on an Electronic Family Registration Card. Developed countries proceeded from the manual and semiautomatic method of medical data processing to the new method of entering, storage, transferring, searching and protecting data, using electronic equipment. Currently, many European countries have developed a Medical Card Based Electronic Information System. Three types of electronic card are currently in use: a Hybrid Card, a Smart Card and a Laser Card. The dilemma is which card should be used as a data carrier. The Electronic Family Registration Cared is a question of strategic interest for B&H, but also a great investment. We should avoid the errors of other countries that have been developing card-based system. In this article we present all mentioned cards and compare advantages and disadvantages of different technologies.

High temperature semiconductor diode laser pumps for high energy laser applications

NASA Astrophysics Data System (ADS)

Campbell, Jenna; Semenic, Tadej; Guinn, Keith; Leisher, Paul O.; Bhunia, Avijit; Mashanovitch, Milan; Renner, Daniel

2018-02-01

Existing thermal management technologies for diode laser pumps place a significant load on the size, weight and power consumption of High Power Solid State and Fiber Laser systems, thus making current laser systems very large, heavy, and inefficient in many important practical applications. To mitigate this thermal management burden, it is desirable for diode pumps to operate efficiently at high heat sink temperatures. In this work, we have developed a scalable cooling architecture, based on jet-impingement technology with industrial coolant, for efficient cooling of diode laser bars. We have demonstrated 60% electrical-to-optical efficiency from a 9xx nm two-bar laser stack operating with propylene-glycolwater coolant, at 50 °C coolant temperature. To our knowledge, this is the highest efficiency achieved from a diode stack using 50 °C industrial fluid coolant. The output power is greater than 100 W per bar. Stacks with additional laser bars are currently in development, as this cooler architecture is scalable to a 1 kW system. This work will enable compact and robust fiber-coupled diode pump modules for high energy laser applications.

Recycling of electrical motors by automatic disassembly

NASA Astrophysics Data System (ADS)

Karlsson, Björn; Järrhed, Jan-Ove

2000-04-01

This paper presents a robotized workstation for end-of-life treatment of electrical motors with an electrical effect of about 1 kW. These motors can, for example, be found in washing machines and in industry. There are two main steps in the work. The first step is an inspection whereby the functionality of the motor is checked and classification either for re-use or for disassembly is done. In the second step the motors classified for disassembly are disassembled in a robotized automatic station. In the initial step measurements are performed during a start-up sequence of about 1 s. By measuring the rotation speed and the current and voltage of the three phases of the motor classification for either reuse or disassembly can be done. During the disassembly work, vision data are fused in order to classify the motors according to their type. The vision system also feeds the control system of the robot with various object co-ordinates, to facilitate correct operation of the robot. Finally, tests with a vision system and eddy-current equipment are performed to decide whether all copper has been removed from the stator.

Fatigue risk management in aviation maintenance : current best practices and potential future countermeasures.

DOT National Transportation Integrated Search

2011-06-01

The unregulated hours and frequent night work characteristic of maintenance can produce significant levels of : employee fatigue, with a resultant risk of maintenance error. Fatigue Risk Management Systems (FRMS) are : widely used to manage fatigue a...

IMPLICATIONS OF BIOSOLIDS/COMPOST UTILIZATION ON THE RISK OF SOIL METALS

EPA Science Inventory

This presentation summarizes the current work on the fundamental changes in soil mineralogical accomplished by additions of biosolids and P to the system which results in changes in phytoavailability/bioavailability. The concepts of phytoavailability/bioavailability are rather s...

Generation of Conflict Resolution Maneuvers for Air Traffic Management

DOT National Transportation Integrated Search

1997-01-01

We explore the use of distributed on-line motion planning algorithms for multiple mobile agents, in Air Traffic Management Systems (ATMS). The work is motivated by current trends in ATMS to move towards decentralized air traffic management, in which ...

Leader empowering behaviours, staff nurse empowerment and work engagement/burnout.

PubMed

Greco, Paula; Laschinger, Heather K Spence; Wong, Carol

2006-12-01

Efforts to improve nursing working conditions are critical to retaining nurses currently in the system and attracting newcomers to the profession (Laschinger et al. 2003b). The nurse leader's empowering behaviours can be pivotal in the way nurses react to their work environment. The purpose of this study was to test a model examining the relationship between nurse leaders' empowerment behaviours, perceptions of staff empowerment, areas of work life and work engagement using Kanter's theory of structural power in organizations. A cross-sectional correlational survey design tested the model in a random sample of 322 staff nurses in acute care hospitals across Ontario. Overall, staff nurses perceived their leaders' behaviours to be somewhat empowering and their work environment to be moderately empowering. Fifty-three percent reported severe levels of burnout. Leader empowering behaviour had an indirect effect on emotional exhaustion (burnout) through structural empowerment and overall fit in the six areas of work life. The final model statistics revealed a good fit (chi(2)=30.4, chi=3, chi=0.96, chi=0.95, chi=0.95). These findings suggest that the Leader's empowering behaviours can enhance person-job fit and prevent burnout. These findings have important implications in the current nursing shortage.

Rotating Reverse Osmosis for Wastewater Reuse

NASA Technical Reports Server (NTRS)

Lueptow, Richard M.; Yoon, Yeomin; Pederson, Cynthia

2004-01-01

Membrane filtration such as Reverse Osmosis (RO) removes ions, proteins, and organic chemicals which are generally very difficult to remove using conventional treatment. Moreover, membrane is an absolute filtration method, so its treatment efficiency and performance are stable and predictable. We are currently working on the development of rotating RO membrane system. Dynamic rotating membrane filtration, which can produce a high shear rate, may be helpful to obtain high rejection of organic pollutants.The goal of our current work is to improve the flux of the device by increasing pressure by a factor of 3 to 4. In addition, the rejections for a wider variety of inorganic and organic compounds typically found in space mission wastewater are measured.

Analysis and Development of Management Information Systems for Private Messes Afloat

DTIC Science & Technology

1988-03-01

the development phase emphasis was placed on a three step approach starting with an analysis of the requirements as established by... oper - ating the mess divided by number of mess members Total Mess Bill Due Total of old bills, current bill, mess share owed, and special assessment 46...TRANSPARENCY THE SYSTEM BEHAVIOR IS TRANSPARENT TO THE USER. THAT MEANS THAT THE USER CAN DEVELOP A CONSISTENT MODEL OF THE SYSTEM WHEN WORKING

Micogreens Experiment

NASA Image and Video Library

2018-03-13

Kennedy Space Center scientists worked with OSRAM to insert a smart horticulture lighting system prototype into a food production system. The Phytofy RL prototype LED provides similar wavelength capability to a plant growth system currently on orbit. Photofy RL provides another avenue for future investigators conducting flight experiments to perform ground tests prior to flight under similar lighting conditions. The Phytofy RLs have been used to successfully grow microgreens of Wasabi, Tokyo Bekana, Mizuna, Broccoli, Garnet Giant, and Cauliflower.

Perceptions of stress, burnout, and support systems in pediatric bone marrow transplantation nursing.

PubMed

Gallagher, Regan; Gormley, Denise K

2009-12-01

Bone marrow transplantation (BMT) is used to treat various conditions, ranging from immune disorders to many types of cancer. The critical complexity of patients and the environment in which BMT nurses work can lead to stress, burnout, and, ultimately, poor retention. This study aimed to investigate nurses' perceptions of work-related stress and burnout as well as current support systems for nurses. The study included 30 BMT staff nurses from a large pediatric medical center in the midwestern United States. Critical illness or acuity of patients was reported as the most stressful factor; long work hours was the least stressful factor. Most nurses perceived moderate to high levels of emotional exhaustion, and 33% reported moderate levels of depersonalization. Fifty percent perceived high levels of personal accomplishment, despite the critical illness or acuity of their patients, demanding patient families, rotating shifts, short staffing, and caring for dying patients. Most nurses felt that support systems were in place and that staff was accessible, but most respondents were undecided about the helpfulness of the support systems. Results suggest that support systems may significantly affect work satisfaction and feelings of accomplishment for BMT nurses.

Development of an intelligent surgical training system for Thoracentesis.

PubMed

Nakawala, Hirenkumar; Ferrigno, Giancarlo; De Momi, Elena

2018-01-01

Surgical training improves patient care, helps to reduce surgical risks, increases surgeon's confidence, and thus enhances overall patient safety. Current surgical training systems are more focused on developing technical skills, e.g. dexterity, of the surgeons while lacking the aspects of context-awareness and intra-operative real-time guidance. Context-aware intelligent training systems interpret the current surgical situation and help surgeons to train on surgical tasks. As a prototypical scenario, we chose Thoracentesis procedure in this work. We designed the context-aware software framework using the surgical process model encompassing ontology and production rules, based on the procedure descriptions obtained through textbooks and interviews, and ontology-based and marker-based object recognition, where the system tracked and recognised surgical instruments and materials in surgeon's hands and recognised surgical instruments on the surgical stand. The ontology was validated using annotated surgical videos, where the system identified "Anaesthesia" and "Aspiration" phase with 100% relative frequency and "Penetration" phase with 65% relative frequency. The system tracked surgical swab and 50mL syringe with approximately 88.23% and 100% accuracy in surgeon's hands and recognised surgical instruments with approximately 90% accuracy on the surgical stand. Surgical workflow training with the proposed system showed equivalent results as the traditional mentor-based training regime, thus this work is a step forward a new tool for context awareness and decision-making during surgical training. Copyright © 2017 Elsevier B.V. All rights reserved.

Audio gunshot detection and localization systems: History, basic design, and future possibilities

NASA Astrophysics Data System (ADS)

Graves, Jordan R.

For decades, law enforcement organizations have increasingly utilized audio detection and localization systems to identify potential gunshot incidents and to respond accordingly. These systems have grown from simple microphone configurations used to estimate location into complex arrays that seem to pinpoint gunfire to within mere feet of its actual occurrence. Such technology comes from a long and dynamic history of developing equipment dating back to the First World War. Additionally, though basic designs require little in terms of programming or engineering experience, the mere presence of this tool invokes a firestorm of debate amongst economists, law enforcement groups, and the general public, which leads to questions about future possibilities for its use. The following pages will retell the history of these systems from theoretical conception to current capabilities. This work will also dissect these systems to reveal fundamental elements of their inner workings, in order to build a basic demonstrative system. Finally, this work will discuss some legal and moral points of dissension, and will explore these systems’ roles in society now and in the future, in additional applications as well.

Partition-free theory of time-dependent current correlations in nanojunctions in response to an arbitrary time-dependent bias

NASA Astrophysics Data System (ADS)

Ridley, Michael; MacKinnon, Angus; Kantorovich, Lev

2017-04-01

Working within the nonequilibrium Green's function formalism, a formula for the two-time current correlation function is derived for the case of transport through a nanojunction in response to an arbitrary time-dependent bias. The one-particle Hamiltonian and the wide-band limit approximation are assumed, enabling us to extract all necessary Green's functions and self-energies for the system, extending the analytic work presented previously [Ridley et al., Phys. Rev. B 91, 125433 (2015), 10.1103/PhysRevB.91.125433]. We show that our expression for the two-time correlation function generalizes the Büttiker theory of shot and thermal noise on the current through a nanojunction to the time-dependent bias case including the transient regime following the switch-on. Transient terms in the correlation function arise from an initial state that does not assume (as is usually done) that the system is initially uncoupled, i.e., our approach is partition free. We show that when the bias loses its time dependence, the long-time limit of the current correlation function depends on the time difference only, as in this case an ideal steady state is reached. This enables derivation of known results for the single-frequency power spectrum and for the zero-frequency limit of this power spectrum. In addition, we present a technique which facilitates fast calculations of the transient quantum noise, valid for arbitrary temperature, time, and voltage scales. We apply this formalism to a molecular wire system for both dc and ac biases, and find a signature of the traversal time for electrons crossing the wire in the time-dependent cross-lead current correlations.

A squid-based beam current monitor for FAIR/CRYRING

NASA Astrophysics Data System (ADS)

Geithner, Rene; Kurian, Febin; Reeg, Hansjörg; Schwickert, Marcus; Neubert, Ralf; Seidel, Paul; Stöhlker, Thomas

2015-11-01

A SQUID-based beam current monitor was developed for the upcoming FAIR-Project, providing a non-destructive online monitoring of the beam currents in the nA-range. The cryogenic current comparator (CCC) was optimized for lowest possible noise-limited current resolution together with a high system bandwidth. This CCC is foreseen to be installed in the CRYRING facility (CRYRING@ESR: A study group report www.gsi.de/fileadmin/SPARC/documents/Cryring/ReportCryring_40ESR.PDF), working as a test bench for FAIR. In this contribution we present results of the completed CCC for FAIR/CRYRING and also arrangements that have been done for the installation of the CCC at CRYRING, regarding the cryostat design.

Performance Evaluation and Benchmarking of Intelligent Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madhavan, Raj; Messina, Elena; Tunstel, Edward

To design and develop capable, dependable, and affordable intelligent systems, their performance must be measurable. Scientific methodologies for standardization and benchmarking are crucial for quantitatively evaluating the performance of emerging robotic and intelligent systems technologies. There is currently no accepted standard for quantitatively measuring the performance of these systems against user-defined requirements; and furthermore, there is no consensus on what objective evaluation procedures need to be followed to understand the performance of these systems. The lack of reproducible and repeatable test methods has precluded researchers working towards a common goal from exchanging and communicating results, inter-comparing system performance, and leveragingmore » previous work that could otherwise avoid duplication and expedite technology transfer. Currently, this lack of cohesion in the community hinders progress in many domains, such as manufacturing, service, healthcare, and security. By providing the research community with access to standardized tools, reference data sets, and open source libraries of solutions, researchers and consumers will be able to evaluate the cost and benefits associated with intelligent systems and associated technologies. In this vein, the edited book volume addresses performance evaluation and metrics for intelligent systems, in general, while emphasizing the need and solutions for standardized methods. To the knowledge of the editors, there is not a single book on the market that is solely dedicated to the subject of performance evaluation and benchmarking of intelligent systems. Even books that address this topic do so only marginally or are out of date. The research work presented in this volume fills this void by drawing from the experiences and insights of experts gained both through theoretical development and practical implementation of intelligent systems in a variety of diverse application domains. The book presents a detailed and coherent picture of state-of-the-art, recent developments, and further research areas in intelligent systems.« less

A Website System for Communicating Psychological Science.

PubMed

Diener, Ed

2017-07-01

The peer review and journal system have shortcomings, and both computers and the Internet have made complementary or alternative systems attractive. In this article, I recommend that we implement a new platform for open communication of psychological science on a dedicated website to complement the current review and journal system, with reader reviews of the articles and with all behavioral scientists being eligible to publish and review articles. The judged merit of articles would be based on the citations and the ratings of the work by the whole scientific community. This online journal will be quicker, more democratic, and more informative than the current system. Although the details of the system should be debated and formulated by a committee of scientists, adding this online journal to the existing publications of a society such as the Association for Psychological Science has few risks and many possible gains. An online journal deserves to be tried and assessed.

Material Analysis and System Design for Exploration Life Support Systems 2017

NASA Technical Reports Server (NTRS)

Knox, Jim; Cmarik, Gregory E.

2017-01-01

Advanced Environmental Control and Life Support System (ECLSS) design is critical for manned space flight beyond Earth. Current systems enable extended missions in low-Earth orbit, but for deep-space missions, not only will astronauts be outside the reach of resupply operations from Earth but they will also need to handle malfunctions and compensate for the degradation of materials. These two daunting challenges must be overcome for long-term independent space flight. In order to solve the first, separation and recycling of onboard atmosphere is required. Current systems utilize space vacuum to fully regenerate CO2 sorbent beds, but this is not sustainable. The second challenge stems from material and performance degradation due to operational cycling and on-board contaminants. This report will review the recent work by the ECLSS team at Marshall Space Flight Center towards overcoming these challenges by characterizing materials via novel methods and by assessing new air revitalization systems.

Mobile collaborative medical display system.

PubMed

Park, Sanghun; Kim, Wontae; Ihm, Insung

2008-03-01

Because of recent advances in wireless communication technologies, the world of mobile computing is flourishing with a variety of applications. In this study, we present an integrated architecture for a personal digital assistant (PDA)-based mobile medical display system that supports collaborative work between remote users. We aim to develop a system that enables users in different regions to share a working environment for collaborative visualization with the potential for exploring huge medical datasets. Our system consists of three major components: mobile client, gateway, and parallel rendering server. The mobile client serves as a front end and enables users to choose the visualization and control parameters interactively and cooperatively. The gateway handles requests and responses between mobile clients and the rendering server for efficient communication. Through the gateway, it is possible to share working environments between users, allowing them to work together in computer supported cooperative work (CSCW) mode. Finally, the parallel rendering server is responsible for performing heavy visualization tasks. Our experience indicates that some features currently available to our mobile clients for collaborative scientific visualization are limited due to the poor performance of mobile devices and the low bandwidth of wireless connections. However, as mobile devices and wireless network systems are experiencing considerable elevation in their capabilities, we believe that our methodology will be utilized effectively in building quite responsive, useful mobile collaborative medical systems in the very near future.

Teleeducation and telepathology for open and distance education.

PubMed

Szymas, J

2000-01-01

Our experience in creating and using telepathology system and multimedia database for education is described. This program packet currently works in the Department of Pathology of University Medical School in Poznan. It is used for self-education, tests, services and for the examinations in pathology, i.e., for dental students and for medical students in terms of self-education and individual examination services. The system is implemented on microcomputers compatible with IBM PC and works in the network system Netware 5.1. Some modules are available through the Internet. The program packet described here accomplishes the TELEMIC system for telepathology, ASSISTANT, which is the administrator for the databases, and EXAMINATOR, which is the executive program. The realization of multi-user module allows students to work on several working areas, on random be chosen different sets of problems contemporary. The possibility to work in the exercise mode will image files and questions is an attractive way for self-education. The standard format of the notation files enables to elaborate the results by commercial statistic packets in order to estimate the scale of answers and to find correlation between the obtained results. The method of multi-criterion grading excludes unlimited mutual compensation of the criteria, differentiates the importance of particular courses and introduces the quality criteria. The packet is part of the integrated management information system of the department of pathology. Applications for other telepathological systems are presented.

An investigation of the role of current and future remote sensing data systems in numerical meteorology

NASA Technical Reports Server (NTRS)

Diak, George R.; Smith, William L.

1992-01-01

A flexible system for performing observing system simulation experiments which made contributions to meteorology across all elements of the observing system simulation experiment (OSSE) components was developed. Future work will seek better understanding of the links between satellite-measured radiation and radiative transfer in the clear, cloudy and precipitating atmosphere and investigate how that understanding might be applied to improve the depiction of the initial state and the treatment of physical processes in forecast models of the atmosphere.

Electromagnetic characteristics of eccentric figure-eight coils for transcranial magnetic stimulation: A numerical study

NASA Astrophysics Data System (ADS)

Kato, Takuya; Sekino, Masaki; Matsuzaki, Taiga; Nishikawa, Atsushi; Saitoh, Youichi; Ohsaki, Hiroyuki

2012-04-01

Repetitive transcranial magnetic stimulation (rTMS) is effective for treatment of several neurological and psychiatric diseases. We proposed an eccentric figure-eight coil, which induces strong eddy currents in the target brain tissue. In this study, numerical analyses were carried out to obtain magnetic field distribution of the eccentric figure-eight coil and eddy current in the brain. The analyses were performed with various coil design parameters, such as the outer and inner diameters and number of turns, to investigate the influence of these parameters on the coil characteristics. Increases in the inner diameter, outer diameter, and number of turns caused increases in the maximum eddy current densities. Coil inductance, working voltage, and heat generation also became higher with the increases in these design parameters. In order to develop a compact stimulator system for use at home, we need to obtain strong eddy current density, keeping the working voltage as low as possible. Our results show that it is effective to enlarge the outer diameter.

Modelling of a Double-Track Railway Contact System Electric Field Intensity

NASA Astrophysics Data System (ADS)

Belinsky, Stanislav; Khanzhina, Olga; Sidorov, Alexander

2017-12-01

Working conditions of personnel that serves contact system (CS) are affected by factors including health and safety, security and working hours (danger of rolling stock accidents, danger of electric shock strokes, work at height, severity and tension of work, increased noise level, etc.) Low frequency electromagnetic fields as part of both electric and magnetic fields are among of the most dangerous and harmful factors. These factors can affect not only the working personnel, but also a lot of people, who do not work with the contact system itself, but could be influenced by electromagnetic field as the result of their professional activity. People, who use public transport or live not far from the electrified lines, are endangered by these factors as well. There are results of the theoretical researches in which low frequency electric fields of railway contact system were designed with the use of mathematical and computer modelling. Significant features of electric field distribution near double-track railway in presence or absence of human body were established. The studies showed the dependence of low frequency electric field parameters on the distance to the track axis, height, and presence or absence of human body. The obtained data were compared with permissible standards established in the Russian Federation and other countries with advanced electrified railway system. Evaluation of low frequency electric fields harmful effect on personnel is the main result of this work. It is also established, that location of personnel, voltage and current level, amount of tracks and other factors influence electric fields of contact systems.

Chronic and integrated care in Catalonia

PubMed Central

Contel, Juan Carlos; Ledesma, Albert; Blay, Carles; Mestre, Assumpció González; Cabezas, Carmen; Puigdollers, Montse; Zara, Corine; Amil, Paloma; Sarquella, Ester; Constante, Carles

2015-01-01

Introduction The Chronicity Prevention and Care Programme set up by the Health Plan for Catalonia 2011–2015 has been an outstanding and excellent opportunity to create a new integrated care model in Catalonia. People with chronic conditions require major changes and transformation within the current health and social system. The new and gradual context of ageing, increase in the number of chronic diseases and the current fragmented system requires this transformation to be implemented. Method The Chronicity Prevention and Care Programme aims to implement actions which drive the current system towards a new scenario where organisations and professionals must work collaboratively. New tools should facilitate this new context- or work-like integrated health information systems, an integrative financing and commissioning scheme and provide a new approach to virtual care by substituting traditional face-to-face care with transfer and shared responsibilities between patients, citizens and health care professionals. Results It has been observed some impact reducing the rate of emergency admissions and readmission related to chronic conditions and better outcome related to better chronic disease control. Some initiative like the Catalan Expert Patient Program has obtained good results and an appropriate service utilization. Discussion The implementation of a Chronic Care Program show good results but it is expected that the new integrated health and social care agenda could provoke a real change and transformation. Some of the results related to better health outcomes and a decrease in avoidable hospital admissions related to chronic conditions confirm we are on the right track to make our health and social system more sustainable for the decades to come. PMID:26150763

Experimental grid connected PV system power analysis

NASA Astrophysics Data System (ADS)

Semaoui, Smail; Abdeladim, Kamel; Arab, Amar Hadj; Boulahchich, Saliha; Amrouche, Said Ould; Yassaa, Noureddine

2018-05-01

Almost 80 % of Algerian territory is appropriate for the exploitation of solar energy. The Algerian energetic strategy provides a substantial injection of PV electricity to the national grid. Currently, about 344 MWp of PV arrays which corresponds approximately to 2,34 km2 of module surfaces, are connected on electricity grid over the national territory. The Algerian Northern regions are characterized by strong pollution and high humidity. These phenomena affect the energetic productivity of PV generator. The objective of our study is to analyze experimental grid connected PV system power in coastal locations. Hence, experiments have been conducted on three identical PV systems to determine the electrical performances. Transformer-less inverters are the most attractive for the ground-based photovoltaic (PV) system due to their efficiencies, reduced cost and weight. Besides, the absence of the galvanic isolation generates problems of capacitive leakage current on the AC side and the degradation of the insulation resistance on the DC side of the inverter. In this work, experimental study of the behavior of single-phase inverters without transformers is presented. The main objective of this work is to study the degradation of the insulation resistance at the input of the inverter, and the capacitive leakage current at the output of the inverter. This study was achieved at the CDER on a rainy day of 15/03/2017, on the first PV plant connected to the low voltage network in Algeria. This investigation can help forecasting the PV array energetic production by taking into account natural conditions.

Automatic Generalizability Method of Urban Drainage Pipe Network Considering Multi-Features

NASA Astrophysics Data System (ADS)

Zhu, S.; Yang, Q.; Shao, J.

2018-05-01

Urban drainage systems are indispensable dataset for storm-flooding simulation. Given data availability and current computing power, the structure and complexity of urban drainage systems require to be simplify. However, till data, the simplify procedure mainly depend on manual operation that always leads to mistakes and lower work efficiency. This work referenced the classification methodology of road system, and proposed a conception of pipeline stroke. Further, length of pipeline, angle between two pipelines, the pipeline belonged road level and diameter of pipeline were chosen as the similarity criterion to generate the pipeline stroke. Finally, designed the automatic method to generalize drainage systems with the concern of multi-features. This technique can improve the efficiency and accuracy of the generalization of drainage systems. In addition, it is beneficial to the study of urban storm-floods.

New Developments in Wildfire Pollution Forecasting at the Canadian Meteorological Centre

NASA Astrophysics Data System (ADS)

Pavlovic, Radenko; Chen, Jack; Munoz-Alpizar, Rodrigo; Davignon, Didier; Beaulieu, Paul-Andre; Landry, Hugo; Menard, Sylvain; Gravel, Sylvie; Moran, Michael

2017-04-01

Environment and Climate Change Canada's air quality forecast system with near-real-time wildfire emissions, named FireWork, was developed in 2012 and has been run by the Canadian Meteorological Centre Operations division (CMCO) since 2013. In June 2016 this system was upgraded to operational status and wildfire smoke forecasts for North America are now available to the general public. FireWork's ability to model the transport and diffusion of wildfire smoke plumes has proved to be valuable to regional air quality forecasters and emergency first responders. Some of the most challenging issues with wildfire pollution modelling concern the production of wildfire emission estimates and near-source dispersion within the air quality model. As a consequence, FireWork is undergoing constant development. During the massive Fort McMurray wildfire event in western Canada in May 2016, for example, different wildfire emissions processing approaches and wildfire emissions injection and dispersion schemes were tested within the air quality model. Work on various FireWork components will continue in order to deliver a new operational version of the forecasting system for the 2017 wildfire season. Some of the proposed improvements will be shown in this presentation along with current and planned FireWork post-processing products.

Combining metric episodes with semantic event concepts within the Symbolic and Sub-Symbolic Robotics Intelligence Control System (SS-RICS)

NASA Astrophysics Data System (ADS)

Kelley, Troy D.; McGhee, S.

2013-05-01

This paper describes the ongoing development of a robotic control architecture that inspired by computational cognitive architectures from the discipline of cognitive psychology. The Symbolic and Sub-Symbolic Robotics Intelligence Control System (SS-RICS) combines symbolic and sub-symbolic representations of knowledge into a unified control architecture. The new architecture leverages previous work in cognitive architectures, specifically the development of the Adaptive Character of Thought-Rational (ACT-R) and Soar. This paper details current work on learning from episodes or events. The use of episodic memory as a learning mechanism has, until recently, been largely ignored by computational cognitive architectures. This paper details work on metric level episodic memory streams and methods for translating episodes into abstract schemas. The presentation will include research on learning through novelty and self generated feedback mechanisms for autonomous systems.

Parallel, Asynchronous Executive (PAX): System concepts, facilities, and architecture

NASA Technical Reports Server (NTRS)

Jones, W. H.

1983-01-01

The Parallel, Asynchronous Executive (PAX) is a software operating system simulation that allows many computers to work on a single problem at the same time. PAX is currently implemented on a UNIVAC 1100/42 computer system. Independent UNIVAC runstreams are used to simulate independent computers. Data are shared among independent UNIVAC runstreams through shared mass-storage files. PAX has achieved the following: (1) applied several computing processes simultaneously to a single, logically unified problem; (2) resolved most parallel processor conflicts by careful work assignment; (3) resolved by means of worker requests to PAX all conflicts not resolved by work assignment; (4) provided fault isolation and recovery mechanisms to meet the problems of an actual parallel, asynchronous processing machine. Additionally, one real-life problem has been constructed for the PAX environment. This is CASPER, a collection of aerodynamic and structural dynamic problem simulation routines. CASPER is not discussed in this report except to provide examples of parallel-processing techniques.

Current sheet formation in a sheared force-free-magnetic field. [in sun

NASA Technical Reports Server (NTRS)

Wolfson, Richard

1989-01-01

This paper presents the results of a study showing how continuous shearing motion of magnetic footpoints in a tenuous, infinitely conducting plasma can lead to the development of current sheets, despite the absence of such sheets or even of neutral points in the initial state. The calculations discussed here verify the earlier suggestion by Low and Wolfson (1988) that extended current sheets should form due to the shearing of a force-free quadrupolar magnetic field. More generally, this work augments earlier studies suggesting that the appearance of discontinuities - current sheets - may be a necessary consequence of the topological invariance imposed on the magnetic field geometry of an ideal MHD system by virtue of its infinite conductivity. In the context of solar physics, the work shows how the gradual and continuous motion of magnetic footpoints at the solar photosphere may lead to the buildup of magnetic energy that can then be released explosively when finite conductivity effects become important and lead to the rapid dissipation of current sheets. Such energy release may be important in solar flares, coronal mass ejections, and other eruptive events.

Robot-Assisted Fracture Surgery: Surgical Requirements and System Design.

PubMed

Georgilas, Ioannis; Dagnino, Giulio; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

2018-03-09

The design of medical devices is a complex and crucial process to ensure patient safety. It has been shown that improperly designed devices lead to errors and associated accidents and costs. A key element for a successful design is incorporating the views of the primary and secondary stakeholders early in the development process. They provide insights into current practice and point out specific issues with the current processes and equipment in use. This work presents how information from a user-study conducted in the early stages of the RAFS (Robot Assisted Fracture Surgery) project informed the subsequent development and testing of the system. The user needs were captured using qualitative methods and converted to operational, functional, and non-functional requirements based on the methods derived from product design and development. This work presents how the requirements inform a new workflow for intra-articular joint fracture reduction using a robotic system. It is also shown how the various elements of the system are developed to explicitly address one or more of the requirements identified, and how intermediate verification tests are conducted to ensure conformity. Finally, a validation test in the form of a cadaveric trial confirms the ability of the designed system to satisfy the aims set by the original research question and the needs of the users.

Patient–physician communication about work-related asthma: what we do and do not know

PubMed Central

Mazurek, Jacek M.; White, Gretchen E.; Moorman, Jeanne E.; Storey, Eileen

2015-01-01

Background Effective patient–physician communication is the key component of the patient–physician relationship. Objective To assess the proportion of ever-employed adults with current asthma who talked about asthma associated with work with their physician or other health professional and to identify factors associated with this communication. Methods The 2006 to 2010 Behavioral Risk Factor Surveillance System Asthma Call-Back Survey data from 40 states and the District of Columbia for ever-employed adults (≥18 years old) with current asthma (N = 50,433) were examined. Multivariable logistic regression analyses were conducted to identify factors associated with communication with a health professional about asthma and work. Results Among ever-employed adults with current asthma, 9.1% were ever told by a physician that their asthma was related to any job they ever had and 11.7% ever told a physician or other health professional that this was the case. When responses to the 2 questions were combined, the proportion of those who communicated with a health professional about asthma and work was 14.7%. Communication with a health professional about asthma and work was associated with age, race or ethnicity, employment, education, income, insurance, and urgent treatment for worsening asthma. Conclusion A small proportion of patients with asthma might communicate with a health professional about asthma associated with work. Future studies should examine whether patients with asthma ever discussed with a health professional the possibility that their asthma might be related to work to provide information on the frequency of patient–clinician communication about asthma related to work. PMID:25492097

Reduction of magneto rheological dampers stiffness by incorporating of an eddy current damper

NASA Astrophysics Data System (ADS)

Asghar Maddah, Ali; Hojjat, Yousef; Reza Karafi, Mohammad; Reza Ashory, Mohammad

2017-05-01

In this paper, a hybrid damper is developed to achieve lower stiffness compared to magneto rheological dampers. The hybrid damper consists of an eddy current damper (ECD) and a Magneto Rheological Damper (MRD). The aim of this research is to reduce the stiffness of MRDs with equal damping forces. This work is done by adding an eddy current passive damper to a semi-active MRD. The ECDs are contactless dampers which show an almost viscous damping behavior without increasing the stiffness of a system. However, MRDs increase damping and stiffness of a system simultaneously, when a magnetic field is applied. Damping of each part is studied theoretically and experimentally. A semi-empirical model is developed to explain the viscoelastic behavior of the damper. The experimental results showed that the hybrid damper is able to dissipate energy as much as those of MRDs while its stiffness is 12% lower at a zero excitation current.

Design document for the Surface Currents Data Base (SCDB) Management System (SCDBMS), version 1.0

NASA Technical Reports Server (NTRS)

Krisnnamagaru, Ramesh; Cesario, Cheryl; Foster, M. S.; Das, Vishnumohan

1994-01-01

The Surface Currents Database Management System (SCDBMS) provides access to the Surface Currents Data Base (SCDB) which is maintained by the Naval Oceanographic Office (NAVOCEANO). The SCDBMS incorporates database technology in providing seamless access to surface current data. The SCDBMS is an interactive software application with a graphical user interface (GUI) that supports user control of SCDBMS functional capabilities. The purpose of this document is to define and describe the structural framework and logistical design of the software components/units which are integrated into the major computer software configuration item (CSCI) identified as the SCDBMS, Version 1.0. The preliminary design is based on functional specifications and requirements identified in the governing Statement of Work prepared by the Naval Oceanographic Office (NAVOCEANO) and distributed as a request for proposal by the National Aeronautics and Space Administration (NASA).

NASA's MERBoard: An Interactive Collaborative Workspace Platform. Chapter 4

NASA Technical Reports Server (NTRS)

Trimble, Jay; Wales, Roxana; Gossweiler, Rich

2003-01-01

This chapter describes the ongoing process by which a multidisciplinary group at NASA's Ames Research Center is designing and implementing a large interactive work surface called the MERBoard Collaborative Workspace. A MERBoard system involves several distributed, large, touch-enabled, plasma display systems with custom MERBoard software. A centralized server and database back the system. We are continually tuning MERBoard to support over two hundred scientists and engineers during the surface operations of the Mars Exploration Rover Missions. These scientists and engineers come from various disciplines and are working both in small and large groups over a span of space and time. We describe the multidisciplinary, human-centered process by which this h4ERBoard system is being designed, the usage patterns and social interactions that we have observed, and issues we are currently facing.

Public mental hospital work: pros and cons for psychiatrists.

PubMed

Miller, R D

1984-09-01

The extensive literature concerning public mental hospitals has largely been written from the perspective of administrators and systems analysts; most of the reports emphasize the frustrations and problems of working in public mental hospitals and the continued exodus of psychiatrists from these facilities. The author addresses the pros and cons of such a career choice from the viewpoint of one who has been an "Indian" rather than a "chief" for a decade. He suggests that the current financial situation in both private practice and academia makes work in public mental hospitals increasingly attractive.

Ada Embedded Systems Testbed Project

DTIC Science & Technology

1987-12-01

project’s work to their home organizations, as well as adding the DoD’s perspective to many Issues while at the SEI. Currently, the only government...Future Work 51 6. Summary and Future Directions 53 References 55 CMU/SE147-TR-31 Ill ~~~4 - a I I I I ) ) ) N A Iv CMU/SE147.TR-31 " List of Figures...the Ada benchmarks available from University of Michigan and the Performance Issues Working Group of SIGAda were run under VAXE.N and on the bare

WE-G-BRD-09: Novel MRI Compatible Electron Accelerator for MRI-Linac Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whelan, B; Keall, P; Gierman, S

Purpose: MRI guided radiotherapy is a rapidly growing field; however current linacs are not designed to operate in MRI fringe fields. As such, current MRI- Linac systems require magnetic shielding, impairing MR image quality and system flexibility. Here, we present a bespoke electron accelerator concept with robust operation in in-line magnetic fields. Methods: For in-line MRI-Linac systems, electron gun performance is the major constraint on accelerator performance. To overcome this, we propose placing a cathode directly within the first accelerating cavity. Such a configuration is used extensively in high energy particle physics, but not previously for radiotherapy. Benchmarked computational modellingmore » (CST, Darmstadt, Germany) was employed to design and assess a 5.5 cell side coupled accelerator with a temperature limited thermionic cathode in the first accelerating cell. This simulation was coupled to magnetic fields from a 1T MRI model to assess robustness in magnetic fields for Source to Isocenter Distance between 1 and 2 meters. Performance was compared to a conventional electron gun based system in the same magnetic field. Results: A temperature limited cathode (work function 1.8eV, temperature 1245K, emission constant 60A/K/cm{sup 2}) will emit a mean current density of 24mA/mm{sup 2} (Richardson’s Law). We modeled a circular cathode with radius 2mm and mean current 300mA. Capture efficiency of the device was 43%, resulting in target current of 130 mA. The electron beam had a FWHM of 0.2mm, and mean energy of 5.9MeV (interquartile spread of 0.1MeV). Such an electron beam is suitable for radiotherapy, comparing favourably to conventional systems. This model was robust to operation the MRI fringe field, with a maximum current loss of 6% compared to 85% for the conventional system. Conclusion: The bespoke electron accelerator is robust to operation in in-line magnetic fields. This will enable MRI-Linacs with no accelerator magnetic shielding, and minimise painstaking optimisation of the MRI fringe field. This work was supported by US (NIH) and Australian (NHMRC & Cancer Institute NSW) government research funding. In addition, I would like to thank cancer institute NSW and the Ingham Institute for scholarship support.« less

Collaborative Protection and Control Schemes for Shipboard Electrical Systems

DTIC Science & Technology

2007-03-26

VSCs ) for fault current limiting and interruption. Revisions needed on the VSCs to perform these functions have been identified, and feasibility of this...disturbances very fast - less than 3-4 ms [3]. Next section summarizes the details of the agent based protection scheme that uses the VSC as the...fault currents. In our previous work [2, 3], it has been demonstrated that this new functionally for VSC can be achieved by proper selection of

Temperature dependent charge transport in poly(3-hexylthiophene) diodes

NASA Astrophysics Data System (ADS)

Rahaman, Abdulla Bin; Sarkar, Atri; Banerjee, Debamalya

2018-04-01

In this work, we present charge transport properties of poly(3-hexylthiophene) (P3HT) diodes under dark conditions. Temperature dependent current-voltage (J-V) characteristics shows that charge transport represents a transition from ohomic to trap limited current. The forward current density obeys a power law J˜Vm, m>2 represents the space charge limited current region in presence of traps within the band gap. Frequency dependent conductivity has been studied in a temperature range 150K-473K. The dc conductivity values show Arrhenius like behavior and it gives conductivity activation energy 223 meV. Temperature dependent conductivity indicates a thermodynamic transition of our system.

Low noise constant current source for bias dependent noise measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Talukdar, D.; Bose, Suvendu; Bardhan, K. K.

2011-01-15

A low noise constant current source used for measuring the 1/f noise in disordered systems in ohmic as well as nonohmic regime is described. The source can supply low noise constant current starting from as low as 1 {mu}A to a few tens of milliampere with a high voltage compliance limit of around 20 V. The constant current source has several stages, which can work in a standalone manner or together to supply the desired value of load current. The noise contributed by the current source is very low in the entire current range. The fabrication of a low noisemore » voltage preamplifier modified for bias dependent noise measurements and based on the existing design available in the MAT04 data sheet is also described.« less

A multilayer perceptron solution to the match phase problem in rule-based artificial intelligence systems

NASA Technical Reports Server (NTRS)

Sartori, Michael A.; Passino, Kevin M.; Antsaklis, Panos J.

1992-01-01

In rule-based AI planning, expert, and learning systems, it is often the case that the left-hand-sides of the rules must be repeatedly compared to the contents of some 'working memory'. The traditional approach to solve such a 'match phase problem' for production systems is to use the Rete Match Algorithm. Here, a new technique using a multilayer perceptron, a particular artificial neural network model, is presented to solve the match phase problem for rule-based AI systems. A syntax for premise formulas (i.e., the left-hand-sides of the rules) is defined, and working memory is specified. From this, it is shown how to construct a multilayer perceptron that finds all of the rules which can be executed for the current situation in working memory. The complexity of the constructed multilayer perceptron is derived in terms of the maximum number of nodes and the required number of layers. A method for reducing the number of layers to at most three is also presented.

Reproducibility in Natural Language Processing: A Case Study of Two R Libraries for Mining PubMed/MEDLINE

PubMed Central

Cohen, K. Bretonnel; Xia, Jingbo; Roeder, Christophe; Hunter, Lawrence E.

2018-01-01

There is currently a crisis in science related to highly publicized failures to reproduce large numbers of published studies. The current work proposes, by way of case studies, a methodology for moving the study of reproducibility in computational work to a full stage beyond that of earlier work. Specifically, it presents a case study in attempting to reproduce the reports of two R libraries for doing text mining of the PubMed/MEDLINE repository of scientific publications. The main findings are that a rational paradigm for reproduction of natural language processing papers can be established; the advertised functionality was difficult, but not impossible, to reproduce; and reproducibility studies can produce additional insights into the functioning of the published system. Additionally, the work on reproducibility lead to the production of novel user-centered documentation that has been accessed 260 times since its publication—an average of once a day per library. PMID:29568821

Examining the Influence of Context and Professional Culture on Clinical Reasoning Through Rhetorical-Narrative Analysis.

PubMed

Peters, Amanda; Vanstone, Meredith; Monteiro, Sandra; Norman, Geoff; Sherbino, Jonathan; Sibbald, Matthew

2017-05-01

According to the dual process model of reasoning, physicians make diagnostic decisions using two mental systems: System 1, which is rapid, unconscious, and intuitive, and System 2, which is slow, rational, and analytical. Currently, little is known about physicians' use of System 1 or intuitive reasoning in practice. In a qualitative study of clinical reasoning, physicians were asked to tell stories about times when they used intuitive reasoning while working up an acutely unwell patient, and we combine socio-narratology and rhetorical theory to analyze physicians' stories. Our analysis reveals that in describing their work, physicians draw on two competing narrative structures: one that is aligned with an evidence-based medicine approach valuing System 2 and one that is aligned with cooperative decision making involving others in the clinical environment valuing System 1. Our findings support an understanding of clinical reasoning as distributed, contextual, and influenced by professional culture.

3D Electrical Resistivity Tomography and Mise-à-la-Masse Method as Tools for the Characterization of Vine Roots

NASA Astrophysics Data System (ADS)

Boaga, J.; Mary, B.; Peruzzo, L.; Schmutz, M.; Wu, Y.; Hubbard, S. S.; Cassiani, G.

2017-12-01

The interest on non-invasive geophysical monitoring of soil properties and root architecture is rapidly growing. Despite this, few case studies exist concerning vineyards, which are economically one of the leading sectors of agriculture. In this study, we integrate different geophysical methods in order to gain a better imaging of the vine root system, with the aim of quantifying root development, a key factor to understand roots-soil interaction and water balance. Our test site is a vineyard located in Bordeaux (France), where we adopted the Mise-a-la-Masse method (MALM) and micro-scale electrical resistivity tomography (ERT) on the same 3D electrode configuration. While ERT is a well-established technique to image changes in soil moisture content by root activity, MALM is a relatively new approach in this field of research. The idea is to inject current directly in the plant trunk and verify the resulting voltage distribution in the soil, as an effect of current distribution through the root system. In order to distinguish the root effect from other phenomena linked to the soil heterogeneities, we conducted and compared MALM measurements acquired through injecting current into the stem and into the soil near the stem. Moreover, the MALM data measured in the field were compared with numerical simulations to improve the confidence in the interpretation. Differences obtained between the stem and soil injection clearly validated the assumption that the whole root system is acting as a current pathway, thus highlighting the locations at depth where current is entering the soil from the fine roots. The simulation results indicated that the best fit is obtained through considering distributed sources with depth, reflecting a probable root zone area. The root location and volume estimated using this procedure are in agreement with vineyard experimental evidence. This work suggests the promising application of electrical methods to locate and monitor root systems. Further work is necessary to effectively integrate the geophysical and plant physiology information.

An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Younkin, James R; Kuhn, Michael J; Gradle, Colleen

New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integratedmore » into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.« less

Operational seasonal and interannual predictions of ocean conditions

NASA Technical Reports Server (NTRS)

Leetmaa, Ants

1992-01-01

Dr. Leetmaa described current work at the U.S. National Meteorological Center (NMC) on coupled systems leading to a seasonal prediction system. He described the way in which ocean thermal data is quality controlled and used in a four dimensional data assimilation system. This consists of a statistical interpolation scheme, a primitive equation ocean general circulation model, and the atmospheric fluxes that are required to force this. This whole process generated dynamically consist thermohaline and velocity fields for the ocean. Currently routine weekly analyses are performed for the Atlantic and Pacific oceans. These analyses are used for ocean climate diagnostics and as initial conditions for coupled forecast models. Specific examples of output products were shown both in the Pacific and the Atlantic Ocean.

Frenetic Bounds on the Entropy Production

NASA Astrophysics Data System (ADS)

Maes, Christian

2017-10-01

We give a systematic derivation of positive lower bounds for the expected entropy production (EP) rate in classical statistical mechanical systems obeying a dynamical large deviation principle. The logic is the same for the return to thermodynamic equilibrium as it is for steady nonequilibria working under the condition of local detailed balance. We recover there recently studied "uncertainty" relations for the EP, appearing in studies about the effectiveness of mesoscopic machines. In general our refinement of the positivity of the expected EP rate is obtained in terms of a positive and even function of the expected current(s) which measures the dynamical activity in the system, a time-symmetric estimate of the changes in the system's configuration. Also underdamped diffusions can be included in the analysis.

Job Accommodations Availability and Utilization Among People With Lupus: An Examination of Workplace Activity Limitations and Work Context Factors.

PubMed

Al Dhanhani, Ali M; Gignac, Monique A M; Beaton, Dorcas E; Su, Jiandong; Fortin, Paul R

2015-11-01

The aim of this study was to examine the availability of diverse job accommodations (or flexible working arrangements) and to describe their use among people with systemic lupus erythematosus (lupus), as well as to examine factors associated with the use of job accommodations. A mail survey was sent to adult lupus patients receiving care from a lupus clinic based in Toronto, Canada. The survey assessed demographic information, self-reported disease activity, work history, workplace activity limitations, job strain, and the availability and use of job accommodations. Standard multivariable linear regression analysis was used to examine factors associated with the use of job accommodations. We received 362 responses of 604 mailed surveys (60% response rate). Participants who were employed within the last 5 years, but who were not currently working, were less likely than currently employed participants to report having had job accommodations available to them at their last place of employment. The use of job accommodations was reported by 70% of currently employed respondents and by 72% of those not currently employed. The most common job accommodation used was sick leave days. Factors positively associated with the use of job accommodations among those who were employed included higher levels of education, being diagnosed with fibromyalgia, at least 1 episode of short-term work disability, not belonging to a union, greater workplace activity limitations, and greater job strain. The use of job accommodations among people with lupus is common. Work context factors, such as workplace activity limitations and job strain, are the main factors associated with the use of job accommodations. © 2015, American College of Rheumatology.

Review of Systemic Treatment Options for Adult Atopic Dermatitis.

PubMed

Gooderham, Melinda; Lynde, Charles W; Papp, Kim; Bourcier, Marc; Guenther, Lyn; Gulliver, Wayne; Hong, Chih-Ho; Poulin, Yves; Sussman, Gordon; Vender, Ronald

Atopic dermatitis (AD) is a chronic, pruritic inflammatory skin disease resulting from defects in skin barrier and aberrant immune responses. AD significantly affects the quality of life. Not all patients respond to topical therapies, and often systemic therapy is required to control the disease. To review the treatment options for adult AD patients including those options for patients who do not respond adequately or have contraindications to oral systemic therapy. A working group of clinicians with experience managing AD was convened to review the current literature on treatment options for adult AD patients. This review is based on the best available evidence from a published systematic review and an additional literature search. Current treatments for AD are reviewed, including options for adult AD patients who do not respond or have contraindications to current systemic therapies. A new approach with targeted therapies is reviewed based on best available evidence. Many AD patients respond satisfactorily to topical or systemic treatments, but for those patients who do not respond or have contraindications, new biologic agents appear to be promising therapies.

The impact of sea surface currents in wave power potential modeling

NASA Astrophysics Data System (ADS)

Zodiatis, George; Galanis, George; Kallos, George; Nikolaidis, Andreas; Kalogeri, Christina; Liakatas, Aristotelis; Stylianou, Stavros

2015-11-01

The impact of sea surface currents to the estimation and modeling of wave energy potential over an area of increased economic interest, the Eastern Mediterranean Sea, is investigated in this work. High-resolution atmospheric, wave, and circulation models, the latter downscaled from the regional Mediterranean Forecasting System (MFS) of the Copernicus marine service (former MyOcean regional MFS system), are utilized towards this goal. The modeled data are analyzed by means of a variety of statistical tools measuring the potential changes not only in the main wave characteristics, but also in the general distribution of the wave energy and the wave parameters that mainly affect it, when using sea surface currents as a forcing to the wave models. The obtained results prove that the impact of the sea surface currents is quite significant in wave energy-related modeling, as well as temporally and spatially dependent. These facts are revealing the necessity of the utilization of the sea surface currents characteristics in renewable energy studies in conjunction with their meteo-ocean forecasting counterparts.

Literature Review of Spherical Resorcinol-Formaldehyde for Cesium Ion Exchange

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Garrett N.

2014-09-30

The current report summarizes work performed throughout the scientific community and DOE complex as reported in the open literature and DOE-sponsored reports to evaluate the Cs+ ion exchange (CIX) characteristics of SRF resin. King (2007) completed a similar literature review in support of material selection for the Small Column Ion Exchange (SCIX) project. Josephson et al. (2010) and Sams et al. (2009) provided a similar brief review of SRF CIX for the near-tank Cs+ removal (NTCR) project. Thorson (2008a) documented the basis for recommending SRF over SuperLigTM 644 as the primary CIX resin in the WTP. The current review expandsmore » on previous work, summarizes additional work completed to date, and provides a broad view of the literature without focusing on a specific column system. Although the focus of the current review is the SRF resin, many cited references include multiple materials such as the non-spherical GGRF and SuperLigTM 644 organic resins and crystalline silicotitanate (CST) IONSIVTM IE-911, a non-elutable inorganic material. This report summarizes relevant information provided in the literature.« less

Traffic safety facts : feasibility for an EMS workforce safety and health surveillance system

DOT National Transportation Integrated Search

2007-05-01

Emergency Medical Services (EMS) personnel treat an estimated : 22 million patients a year (Maguire and Walz, 2004). : While on duty, EMS workers frequently encounter two : work-related risks: injury and illness. Current research on : EMS workforce i...

Making Online Homework Work

ERIC Educational Resources Information Center

Lunsford, M. Leigh; Pendergrass, Marcus

2016-01-01

Online homework systems, which deliver homework assignments to students and provide real-time feedback on their responses, have the potential to increase student learning in college mathematics classes. However, current research on their effectiveness is inconclusive, with some studies showing gains in student achievement, whereas others report…

Declining Black Employment.

ERIC Educational Resources Information Center

Vedder, Richard; Gallaway, Lowell

1993-01-01

Explores income inequality during declining African-American employment, examines current welfare systems, and suggests ways to improve the economic disadvantages of minority groups. Letting markets work can improve the economic status of African Americans. The present dual African-American economy, a market economy and an entitlement economy, is…

Performance Improvement Assuming Complexity

ERIC Educational Resources Information Center

Rowland, Gordon

2007-01-01

Individual performers, work teams, and organizations may be considered complex adaptive systems, while most current human performance technologies appear to assume simple determinism. This article explores the apparent mismatch and speculates on future efforts to enhance performance if complexity rather than simplicity is assumed. Included are…

JPRS Report. Science & Technology: Europe.

DTIC Science & Technology

1991-03-29

systems (wind power engines, thermal collectors, etc.). Minister of Research and Technology Hubert Curien and Minister of Public Works, Housing...similar to those currently being manufac- tured in the USSR is being hypothesized, together with studies on the development of the new San Marco Scout

Occupational injury and illness recording and reporting requirements--NAICS update and reporting revisions. Final rule.

PubMed

2014-09-18

OSHA is issuing a final rule to update the appendix to its Injury and Illness Recording and Reporting regulation. The appendix contains a list of industries that are partially exempt from requirements to keep records of work-related injuries and illnesses due to relatively low occupational injury and illness rates. The updated appendix is based on more recent injury and illness data and lists industry groups classified by the North American Industry Classification System (NAICS). The current appendix lists industries classified by Standard Industrial Classification (SIC). The final rule also revises the requirements for reporting work-related fatality, injury, and illness information to OSHA. The current regulation requires employers to report work-related fatalities and in-patient hospitalizations of three or more employees within eight hours of the event. The final rule retains the requirement for employers to report work-related fatalities to OSHA within eight hours of the event but amends the regulation to require employers to report all work-related in-patient hospitalizations, as well as amputations and losses of an eye, to OSHA within 24 hours of the event.