A COST EVALUATION OF SMALL SYSTEM COMPLIANCE OPTIONS: POU AND POE TREATMENT UNITS

EPA Science Inventory

The challenges facing small drinking water systems were a major focus of the 1996 Amendments to the Safe Drinking Water Act (SDWA). One way Congress sought to help systems meet these challenges was by explicitly allowing systems to install point-of-use (POU) and point-of-entry (P...

Copper vapor laser acoustic thermometry system

DOEpatents

Galkowski, Joseph J.

1987-01-01

A copper vapor laser (CVL) acoustic thermometry system is disclosed. The invention couples an acoustic pulse a predetermined distance into a laser tube by means of a transducer and an alumina rod such that an echo pulse is returned along the alumina rod to the point of entry. The time differential between the point of entry of the acoustic pulse into the laser tube and the exit of the echo pulse is related to the temperature at the predetermined distance within the laser tube. This information is processed and can provide an accurate indication of the average temperature within the laser tube.

Angle of Attack Modulation for Mars Entry Terminal State Optimization

NASA Technical Reports Server (NTRS)

Lafleur, Jarret M.; Cerimele, Christopher J.

2009-01-01

From the perspective of atmospheric entry, descent, and landing (EDL), one of the most foreboding destinations in the solar system is Mars due in part to its exceedingly thin atmosphere. To benchmark best possible scenarios for evaluation of potential Mars EDL system designs, a study is conducted to optimize the entry-to-terminal-state portion of EDL for a variety of entry velocities and vehicle masses, focusing on the identification of potential benefits of enabling angle of attack modulation. The terminal state is envisioned as one appropriate for the initiation of terminal descent via parachute or other means. A particle swarm optimizer varies entry flight path angle, ten bank profile points, and ten angle of attack profile points to find maximum-final-altitude trajectories for a 10 30 m ellipsled at 180 different combinations of values for entry mass, entry velocity, terminal Mach number, and minimum allowable altitude. Parametric plots of maximum achievable altitude are shown, as are examples of optimized trajectories. It is shown that appreciable terminal state altitude gains (2.5-4.0 km) over pure bank angle control may be possible if angle of attack modulation is enabled for Mars entry vehicles. Gains of this magnitude could prove to be enabling for missions requiring high-altitude landing sites. Conclusions are also drawn regarding trends in the bank and angle of attack profiles that produce the optimal trajectories in this study, and directions for future work are identified.

U.S. Army Delayed Entry Program Optimization Model

DTIC Science & Technology

2004-08-01

United States Military Academy West Point, New York 10996 OPERATIONS RESEARCH CENTER OF EXCELLENCE TECHNICAL REPORT No. DSE-TR- 0428 DTIC #: ADAXXXXX...following entries: Author(s) Department of Systems Engineering 2 Mahan Hall West Point, NY 10996 Client USAAC CAR 4 1307 Third Ave., Fort Knox, KY 40121...Wolter, LTC Michael J. Kwinn, Jr., LTC John Halstead DSE-R- 0428 5S. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8

Is there a bone-nail specific entry point? Automated fit quantification of tibial nail designs during the insertion for six different nail entry points.

PubMed

Amarathunga, J P; Schuetz, M A; Yarlagadda, K V D; Schmutz, B

2015-04-01

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of tibia. Selection of the correct nail insertion point is important for axial alignment of bone fragments and to avoid iatrogenic fractures. However, the standard entry point (SEP) may not always optimise the bone-nail fit due to geometric variations of bones. This study aimed to investigate the optimal entry for a given bone-nail pair using the fit quantification software tool previously developed by the authors. The misfit was quantified for 20 bones with two nail designs (ETN and ETN-Proximal Bend) related to the SEP and 5 entry points which were 5 mm and 10 mm away from the SEP. The SEP was the optimal entry point for 50% of the bones used. For the remaining bones, the optimal entry point was located 5 mm away from the SEP, which improved the overall fit by 40% on average. However, entry points 10 mm away from the SEP doubled the misfit. The optimised bone-nail fit can be achieved through the SEP and within the range of a 5 mm radius, except posteriorly. The study results suggest that the optimal entry point should be selected by considering the fit during insertion and not only at the final position. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

Think Exit at Entry

ERIC Educational Resources Information Center

O'Rourke, Tom; Satterfield, Coy E.

2005-01-01

This paper describes the "Think Exit at Entry" program that has become the guiding principle for the Georgia Department of Juvenile Justice (DJJ). The Georgia DJJ believes that the transition process begins the day the youth enters the system and continues well after release from the institution. Literature points the need for transition…

75 FR 36089 - Payment System Risk Policy; Daylight Overdraft Posting Rules

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-24

... and includes only Accounts Receivable Entry (ARC), Back Office Conversion Entry (BOC), Point-of... account balance and daylight overdraft balance in Account Management Information (AMI), which is a service... under the authority delegated to the Board by the Office of Management and Budget. No collections of...

2. INTERIOR VIEW OF ENTRY CONTROL POINT (BLDG. 768) FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. INTERIOR VIEW OF ENTRY CONTROL POINT (BLDG. 768) FROM SOUTHWEST CORNER - Vandenberg Air Force Base, Space Launch Complex 3, Entry Control Point, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Orion Entry Display Feeder and Interactions with the Entry Monitor System

NASA Technical Reports Server (NTRS)

Baird, Darren; Bernatovich, Mike; Gillespie, Ellen; Kadwa, Binaifer; Matthews, Dave; Penny, Wes; Zak, Tim; Grant, Mike; Bihari, Brian

2010-01-01

The Orion spacecraft is designed to return astronauts to a landing within 10 km of the intended landing target from low Earth orbit, lunar direct-entry, and lunar skip-entry trajectories. Al pile the landing is nominally controlled autonomously, the crew can fly precision entries manually in the event of an anomaly. The onboard entry displays will be used by the crew to monitor and manually fly the entry, descent, and landing, while the Entry Monitor System (EMS) will be used to monitor the health and status of the onboard guidance and the trajectory. The entry displays are driven by the entry display feeder, part of the Entry Monitor System (EMS). The entry re-targeting module, also part of the EMS, provides all the data required to generate the capability footprint of the vehicle at any point in the trajectory, which is shown on the Primary Flight Display (PFD). It also provides caution and warning data and recommends the safest possible re-designated landing site when the nominal landing site is no longer within the capability of the vehicle. The PFD and the EMS allow the crew to manually fly an entry trajectory profile from entry interface until parachute deploy having the flexibility to manually steer the vehicle to a selected landing site that best satisfies the priorities of the crew. The entry display feeder provides data from the ENIS and other components of the GNC flight software to the displays at the proper rate and in the proper units. It also performs calculations that are specific to the entry displays and which are not made in any other component of the flight software. In some instances, it performs calculations identical to those performed by the onboard primary guidance algorithm to protect against a guidance system failure. These functions and the interactions between the entry display feeder and the other components of the EMS are described.

What systems participants know about access and service entry and why managers should listen.

PubMed

Duncombe, Rohena

2017-08-01

Objective The present study looked at the views of people directly involved in the entry process for community health counselling using the frame of the health access literature. The concurrence of system participants' views with the access literature highlights access issues, particularly for people who are vulnerable or disadvantaged. The paper privileges the voices of the system participants, inviting local health services to consider using participatory design to improve access at the entry point. Methods People involved in the entry process for community health counselling explored the question, 'What, for you, are the features of a good intake system?' They also commented on themes identified during pilot interviews. These were thematically analysed for each participant group by the researcher to develop a voice for each stakeholder group. Results People accessing the service could be vulnerable and the entry process failed to take that into account. People directly involved in the counselling service entry system, system participants, consisted of: professionals referring in, people seeking services and reception staff taking first enquiries. They shared substantially the same concerns as each other. The responses from these system participants are consistent with the international literature on access and entry into health services. Conclusion Participatory service design could improve primary healthcare service entry at the local level. Canvassing the experiences of system participants is important for delivering services to those who have the least access and, in that way, could contribute to health equity. What is known about the topic? People with the highest health needs receive the fewest services. Health inequality is increasing. What does this paper add? System participants can provide advice consistent with the academic research literature that is useful for improving service entry at the local level. What are the implications for practitioners? Participatory design can inform policy makers and service providers. Entry systems could acknowledge the potential vulnerability or disadvantage of people approaching the service.

System Design and Cataloging Meet the User: User Interfaces to Online Public Access Catalogs.

ERIC Educational Resources Information Center

Yee, Martha M.

1991-01-01

Discusses features of online public access catalogs: (1) demonstration of relationships between records; (2) provision of entry vocabularies; (3) arrangement of multiple entries on the screen; (4) provision of access points; (5) display of single records; and (6) division of catalogs into separate files or indexes. User studies and other research…

Method and system for efficiently searching an encoded vector index

DOEpatents

Bui, Thuan Quang; Egan, Randy Lynn; Kathmann, Kevin James

2001-09-04

Method and system aspects for efficiently searching an encoded vector index are provided. The aspects include the translation of a search query into a candidate bitmap, and the mapping of data from the candidate bitmap into a search result bitmap according to entry values in the encoded vector index. Further, the translation includes the setting of a bit in the candidate bitmap for each entry in a symbol table that corresponds to candidate of the search query. Also included in the mapping is the identification of a bit value in the candidate bitmap pointed to by an entry in an encoded vector.

Whole-house arsenic water treatment provided more effective arsenic exposure reduction than point-of-use water treatment at New Jersey homes with arsenic in well water

PubMed Central

Spayd, Steven E.; Robson, Mark G.; Buckley, Brian T.

2014-01-01

A comparison of the effectiveness of whole house (point-of-entry) and point-of-use arsenic water treatment systems in reducing arsenic exposure from well water was conducted. The non-randomized observational study recruited 49 subjects having elevated arsenic in their residential home well water in New Jersey. The subjects obtained either point-of-entry or point-of-use arsenic water treatment. Prior ingestion exposure to arsenic in well water was calculated by measuring arsenic concentrations in the well water and obtaining water-use histories for each subject, including years of residence with the current well and amount of water consumed from the well per day. A series of urine samples were collected from the subjects, some starting before water treatment was installed and continuing for at least nine months after treatment had begun. Urine samples were analyzed and speciated for inorganic-related arsenic concentrations. A two-phase clearance of inorganic-related arsenic from urine and the likelihood of a significant body burden from chronic exposure to arsenic in drinking water were identified. After nine months of water treatment the adjusted mean of the urinary inorganic-related arsenic concentrations were significantly lower (p < 0.0005) in the point-of-entry treatment group (2.5 μg/g creatinine) than in the point-of-use treatment group (7.2 μg/g creatinine). The results suggest that whole house arsenic water treatment systems provide a more effective reduction of arsenic exposure from well water than that obtained by point-of-use treatment. PMID:24975493

Point-of-entry drinking-water treatment systems for Superfund applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chambers, C.D.; Janszen, T.A.

1989-06-01

The U.S. Environmental Protection Agency (EPA) and State Superfund agencies need a technical manual to assist their personnel in the selection of an effective drinking-water treatment system for individual households in areas where the drinking water has been adversely affected by Superfund site contaminants and no other alternative water supply is available or feasible. Commercially available water treatment systems for individual households are of two basic types: point-of-use (POU) and point-of-entry (POE). A POU device consists of equipment applied to selected water taps to reduce contaminants at each tap. A POE device consists of equipment to reduce the contaminants inmore » the water distributed throughout the entire structure of a house. The study was initiated to collect monitoring, operation and maintenance, performance, and design data on existing Superfund POE water-treatment systems. Evaluation of the collected data showed that the existing data are not sufficient for the preparation of a technical assistance document to meet the objectives of EPA and State Superfund personnel.« less

Influence of Household Water Filters on Bacteria Growth and Trace Metals in Tap Water of Doha, Qatar.

PubMed

Nriagu, Jerome; Xi, Chuanwu; Siddique, Azhar; Vincent, Annette; Shomar, Basem

2018-05-29

Deteriorating water quality from aging infrastructure, growing threat of pollution from industrialization and urbanization, and increasing awareness about waterborne diseases are among the factors driving the surge in worldwide use of point-of-entry (POE) and point-of-use (POU) filters. Any adverse influence of such consumer point-of-use systems on quality of water at the tap remains poorly understood, however. We determined the chemical and microbiological changes in municipal water from the point of entry into the household plumbing system until it leaves from the tap in houses equipped with filters. We show that POE/POU devices can induce significant deterioration of the quality of tap water by functioning as traps and reservoirs for sludge, scale, rust, algae or slime deposits which promote microbial growth and biofilm formation in the household water distribution system. With changes in water pressure and physical or chemical disturbance of the plumbing system, the microorganisms and contaminants may be flushed into the tap water. Such changes in quality of household water carry a potential health risk which calls for some introspection in widespread deployment of POE/POU filters in water distribution systems.

CROSS-SECTIONAL STUDY ON DIFFERENT ENTRY POINTS FOR ANTEROGRADE FEMORAL INTRAMEDULLARY OSTEOSYNTHESIS

PubMed Central

Kanas, Michel; Wajnsztejn, Andre; Roucourt, Danilo; Fiorentino, Eduardo; Fernandes, Hélio Jorge Alvachian; dos Reis, Fernando Baldy

2015-01-01

Objective: To analyze the degree of knowledge among professionals who treat fractures using the recommended technique, with regard to correlating the nail with the entry point that is considered appropriate. Methods: A questionnaire that presented five types of nail and simulated a transverse diaphyseal fracture of the femur was developed. Results: Responses regarding the entry points corresponding to choosing the type of nail were obtained from 370 orthopedists who were participating in the 41st Brazilian Congress of Orthopedics and Traumatology. It was observed that only 20% correctly identified the entry point and that there was no difference between the professionals within the specialty of Traumatology and the others. Conclusion: It was concluded that the majority of the physicians attending the congress were unaware of the entry points. PMID:27027047

1. GENERAL VIEW OF WEST FACE OF ENTRY CONTROL POINT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF WEST FACE OF ENTRY CONTROL POINT (BLDG. 768) SHOWING RELATIVE POSITION TO TECHNICAL SUPPORT BUILDING (BLDG. 762/762A) AND SLC-3 AIR FORCE BUILDING (BLDG. 761) - Vandenberg Air Force Base, Space Launch Complex 3, Entry Control Point, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

40 CFR 141.22 - Turbidity sampling and analytical requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements. 141.22 Section 141.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Monitoring and Analytical Requirements... suppliers of water for both community and non-community water systems at a representative entry point(s) to...

40 CFR 141.22 - Turbidity sampling and analytical requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements. 141.22 Section 141.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Monitoring and Analytical Requirements... suppliers of water for both community and non-community water systems at a representative entry point(s) to...

40 CFR 141.22 - Turbidity sampling and analytical requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... requirements. 141.22 Section 141.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Monitoring and Analytical Requirements... suppliers of water for both community and non-community water systems at a representative entry point(s) to...

40 CFR 141.22 - Turbidity sampling and analytical requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirements. 141.22 Section 141.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Monitoring and Analytical Requirements... suppliers of water for both community and non-community water systems at a representative entry point(s) to...

40 CFR 141.22 - Turbidity sampling and analytical requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements. 141.22 Section 141.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Monitoring and Analytical Requirements... suppliers of water for both community and non-community water systems at a representative entry point(s) to...

The Design Process of Physical Security as Applied to a U.S. Border Point of Entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, G.G.

1998-10-26

This paper describes the design process of physical security as applied to a U.S. Border Port of Entry (PoE). Included in this paper are descriptions of the elements that compose U.S. border security. The physical security design will describe the various elements that make up the process as well as the considerations that must be taken into account when dealing with system integration of those elements. The distinctions between preventing unlawful entry and exit of illegal contraband will be emphasized.

Trajectory and Aeroheating Environment Development and Sensitivity Analysis for Capsule-shaped Vehicles

NASA Technical Reports Server (NTRS)

Robinson, Jeffrey S.; Wurster, Kathryn E.

2006-01-01

Recently, NASA's Exploration Systems Research and Technology Project funded several tasks that endeavored to develop and evaluate various thermal protection systems and high temperature material concepts for potential use on the crew exploration vehicle. In support of these tasks, NASA Langley's Vehicle Analysis Branch generated trajectory information and associated aeroheating environments for more than 60 unique entry cases. Using the Apollo Command Module as the baseline entry system because of its relevance to the favored crew exploration vehicle design, trajectories for a range of lunar and Mars return, direct and aerocapture Earth-entry scenarios were developed. For direct entry, a matrix of cases was created that reflects reasonably expected minimum and maximum values of vehicle ballistic coefficient, inertial velocity at entry interface, and inertial flight path angle at entry interface. For aerocapture, trajectories were generated for a range of values of initial velocity and ballistic coefficient that, when combined with proper initial flight path angles, resulted in achieving a low Earth orbit either by employing a full lift vector up or full lift vector down attitude. For each trajectory generated, aeroheating environments were generated which were intended to bound the thermal protection system requirements for likely crew exploration vehicle concepts. The trades examined clearly pointed to a range of missions / concepts that will require ablative systems as well as a range for which reusable systems may be feasible. In addition, the results clearly indicated those entry conditions and modes suitable for manned flight, considering vehicle deceleration levels experienced during entry. This paper presents an overview of the analysis performed, including the assumptions, methods, and general approach used, as well as a summary of the trajectory and aerothermal environment information that was generated.

An Approximate Ablative Thermal Protection System Sizing Tool for Entry System Design

NASA Technical Reports Server (NTRS)

Dec, John A.; Braun, Robert D.

2005-01-01

A computer tool to perform entry vehicle ablative thermal protection systems sizing has been developed. Two options for calculating the thermal response are incorporated into the tool. One, an industry-standard, high-fidelity ablation and thermal response program was integrated into the tool, making use of simulated trajectory data to calculate its boundary conditions at the ablating surface. Second, an approximate method that uses heat of ablation data to estimate heat shield recession during entry has been coupled to a one-dimensional finite-difference calculation that calculates the in-depth thermal response. The in-depth solution accounts for material decomposition, but does not account for pyrolysis gas energy absorption through the material. Engineering correlations are used to estimate stagnation point convective and radiative heating as a function of time. The sizing tool calculates recovery enthalpy, wall enthalpy, surface pressure, and heat transfer coefficient. Verification of this tool is performed by comparison to past thermal protection system sizings for the Mars Pathfinder and Stardust entry systems and calculations are performed for an Apollo capsule entering the atmosphere at lunar and Mars return speeds.

An Approximate Ablative Thermal Protection System Sizing Tool for Entry System Design

NASA Technical Reports Server (NTRS)

Dec, John A.; Braun, Robert D.

2006-01-01

A computer tool to perform entry vehicle ablative thermal protection systems sizing has been developed. Two options for calculating the thermal response are incorporated into the tool. One, an industry-standard, high-fidelity ablation and thermal response program was integrated into the tool, making use of simulated trajectory data to calculate its boundary conditions at the ablating surface. Second, an approximate method that uses heat of ablation data to estimate heat shield recession during entry has been coupled to a one-dimensional finite-difference calculation that calculates the in-depth thermal response. The in-depth solution accounts for material decomposition, but does not account for pyrolysis gas energy absorption through the material. Engineering correlations are used to estimate stagnation point convective and radiative heating as a function of time. The sizing tool calculates recovery enthalpy, wall enthalpy, surface pressure, and heat transfer coefficient. Verification of this tool is performed by comparison to past thermal protection system sizings for the Mars Pathfinder and Stardust entry systems and calculations are performed for an Apollo capsule entering the atmosphere at lunar and Mars return speeds.

POU/POE TREATMENT OF ARSENIC IN GROUND WATER

EPA Science Inventory

Point-of-use/Point-of-entry (POU/POE) arsenic removal systems were installed in seventeen homes that were found to have high levels of arsenic (50-480ug/L) in their well water. This presetation will describe the process and the problems encountered in selecting the treatment syst...

Automated location detection of injection site for preclinical stereotactic neurosurgery procedure

NASA Astrophysics Data System (ADS)

Abbaszadeh, Shiva; Wu, Hemmings C. H.

2017-03-01

Currently, during stereotactic neurosurgery procedures, the manual task of locating the proper area for needle insertion or implantation of electrode/cannula/optic fiber can be time consuming. The requirement of the task is to quickly and accurately find the location for insertion. In this study we investigate an automated method to locate the entry point of region of interest. This method leverages a digital image capture system, pattern recognition, and motorized stages. Template matching of known anatomical identifiable regions is used to find regions of interest (e.g. Bregma) in rodents. For our initial study, we tackle the problem of automatically detecting the entry point.

Orion Entry Monitor

NASA Technical Reports Server (NTRS)

Smith, Kelly M.

2016-01-01

NASA is scheduled to launch the Orion spacecraft atop the Space Launch System on Exploration Mission 1 in late 2018. When Orion returns from its lunar sortie, it will encounter Earth's atmosphere with speeds in excess of 11 kilometers per second, and Orion will attempt its first precision-guided skip entry. A suite of flight software algorithms collectively called the Entry Monitor has been developed in order to enhance crew situational awareness and enable high levels of onboard autonomy. The Entry Monitor determines the vehicle capability footprint in real-time, provides manual piloting cues, evaluates landing target feasibility, predicts the ballistic instantaneous impact point, and provides intelligent recommendations for alternative landing sites if the primary landing site is not achievable. The primary engineering challenges of the Entry Monitor is in the algorithmic implementation in making a highly reliable, efficient set of algorithms suitable for onboard applications.

POINT-OF-ENTRY DRINKING WATER TREATMENT SYSTEMS FOR SUPERFUND APPLICATIONS

EPA Science Inventory

The U.S. Environmental Protection AGency (EPA) and State Superfund agencies need a technical assistance manualto assist their personnel in the selection of an effective drinking water treatment system for aindividualhouseholds in areas whre the drinking water has been adversely a...

49 CFR 535.8 - Reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... must submit information electronically through the EPA database system as the single point of entry for... agencies are not prepared to receive information through the EPA database system, manufacturers are... applications for certificates of conformity in accordance through the EPA database including both GHG emissions...

49 CFR 535.8 - Reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... must submit information electronically through the EPA database system as the single point of entry for... agencies are not prepared to receive information through the EPA database system, manufacturers are... applications for certificates of conformity in accordance through the EPA database including both GHG emissions...

49 CFR 535.8 - Reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... must submit information electronically through the EPA database system as the single point of entry for... agencies are not prepared to receive information through the EPA database system, manufacturers are... applications for certificates of conformity in accordance through the EPA database including both GHG emissions...

Responding to Communicable Diseases in Internationally Mobile Populations at Points of Entry and along Porous Borders, Nigeria, Benin, and Togo

PubMed Central

Rogers, Kimberly; Ward, Sarah; Ojo, Olubumni; Kakaī, Clement Glele; Agbeko, Tamekloe Tsidi; Garba, Hassan; MacGurn, Amanda; Oppert, Marydale; Kone, Idrissa; Bamsa, Olutola; Schneider, Dana; Brown, Clive

2017-01-01

Recent multinational disease outbreaks demonstrate the risk of disease spreading globally before public health systems can respond to an event. To ensure global health security, countries need robust multisectoral systems to rapidly detect and respond to domestic or imported communicable diseases. The US Centers for Disease Control and Prevention International Border Team works with the governments of Nigeria, Togo, and Benin, along with Pro-Health International and the Abidjan-Lagos Corridor Organization, to build sustainable International Health Regulations capacities at points of entry (POEs) and along border regions. Together, we strengthen comprehensive national and regional border health systems by developing public health emergency response plans for POEs, conducting qualitative assessments of public health preparedness and response capacities at ground crossings, integrating internationally mobile populations into national health surveillance systems, and formalizing cross-border public health coordination. Achieving comprehensive national and regional border health capacity, which advances overall global health security, necessitates multisectoral dedication to the aforementioned components. PMID:29155668

Responding to Communicable Diseases in Internationally Mobile Populations at Points of Entry and along Porous Borders, Nigeria, Benin, and Togo.

PubMed

Merrill, Rebecca D; Rogers, Kimberly; Ward, Sarah; Ojo, Olubumni; Kakaī, Clement Glele; Agbeko, Tamekloe Tsidi; Garba, Hassan; MacGurn, Amanda; Oppert, Marydale; Kone, Idrissa; Bamsa, Olutola; Schneider, Dana; Brown, Clive

2017-12-01

Recent multinational disease outbreaks demonstrate the risk of disease spreading globally before public health systems can respond to an event. To ensure global health security, countries need robust multisectoral systems to rapidly detect and respond to domestic or imported communicable diseases. The US Centers for Disease Control and Prevention International Border Team works with the governments of Nigeria, Togo, and Benin, along with Pro-Health International and the Abidjan-Lagos Corridor Organization, to build sustainable International Health Regulations capacities at points of entry (POEs) and along border regions. Together, we strengthen comprehensive national and regional border health systems by developing public health emergency response plans for POEs, conducting qualitative assessments of public health preparedness and response capacities at ground crossings, integrating internationally mobile populations into national health surveillance systems, and formalizing cross-border public health coordination. Achieving comprehensive national and regional border health capacity, which advances overall global health security, necessitates multisectoral dedication to the aforementioned components.

Improving access in gastroenterology: The single point of entry model for referrals

PubMed Central

Novak, Kerri L; Van Zanten, Sander Veldhuyzen; Pendharkar, Sachin R

2013-01-01

In 2005, a group of academic gastroenterologists in Calgary (Alberta) adopted a centralized referral intake system known as central triage. This system provided a single point of entry model (SEM) for referrals rather than the traditional system of individual practitioners managing their own referrals and queues. The goal of central triage was to improve wait times and referral management. In 2008, a similar system was developed in Edmonton at the University of Alberta Hospital (Edmonton, Alberta). SEMs have subsequently been adopted by numerous subspecialties throughout Alberta. There are many benefits of SEMs including improved access and reduced wait times. Understanding and measuring complex patient flow systems is key to improving access, and centralized intake systems provide an opportunity to better understand total demand and system bottlenecks. This knowledge is particularly important for specialties such as gastroenterology (GI), in which demand exceeds supply. While it is anticipated that SEMs will reduce wait times for GI care in Canada, the lack of sufficient resources to meet the demand for GI care necessitates additional strategies. PMID:24040629

Improving access in gastroenterology: the single point of entry model for referrals.

PubMed

Novak, Kerri; Veldhuyzen Van Zanten, Sander; Pendharkar, Sachin R

2013-11-01

In 2005, a group of academic gastroenterologists in Calgary (Alberta) adopted a centralized referral intake system known as central triage. This system provided a single point of entry model (SEM) for referrals rather than the traditional system of individual practitioners managing their own referrals and queues. The goal of central triage was to improve wait times and referral management. In 2008, a similar system was developed in Edmonton at the University of Alberta Hospital (Edmonton, Alberta). SEMs have subsequently been adopted by numerous subspecialties throughout Alberta. There are many benefits of SEMs including improved access and reduced wait times. Understanding and measuring complex patient flow systems is key to improving access, and centralized intake systems provide an opportunity to better understand total demand and system bottlenecks. This knowledge is particularly important for specialties such as gastroenterology (GI), in which demand exceeds supply. While it is anticipated that SEMs will reduce wait times for GI care in Canada, the lack of sufficient resources to meet the demand for GI care necessitates additional strategies.

Diversion at re-entry using criminogenic CBT: Review and prototypical program development.

PubMed

Heilbrun, Kirk; Pietruszka, Victoria; Thornewill, Alice; Phillips, Sarah; Schiedel, Rebecca

2017-09-01

Society and the criminal justice system prioritize the reduction of reoffending risk as part of any criminal justice intervention. The Sequential Intercept Model identifies five points of interception at which justice-involved individuals can be diverted into a more rehabilitative alternative: (1) law enforcement/emergency services; (2) booking/initial court hearings; (3) jails/courts; (4) re-entry; and (5) community corrections/community support. The present article focuses on diversion as part of Intercept 5 - re-entry planning and specialized services in the community. We describe the challenges associated with diversion at this stage, and review the relevant research. Next, we describe a "criminogenic cognitive behavioral therapy" project that has been developed and implemented as part of a federal re-entry court. Finally, we discuss the implications of the challenges of intervention at this stage, and the recently developed "Re-entry Project," for research, policy, and practice. Copyright © 2017 John Wiley & Sons, Ltd.

Sarcoidal granuloma developing not only at the entry site of industrial lubricating oil, but also at a regional lymph node and entry points of venepuncture.

PubMed

Kogushi, Hazuki; Egawa, Kiyofumi; Ono, Tomomichi

2006-01-01

We describe a 40-year-old male who presented with sarcoidal granulomas not only at the entry site of an industrial lubricating oil containing silicone in the right thumb, but also in a regional lymph node and at the entry points of venepuncture in both forearms. Laboratory tests and chest X-ray showed no evidence of sarcoidosis. 2006 S. Karger AG, Basel

Mars Science Laboratory Navigation Results

NASA Technical Reports Server (NTRS)

Martin-Mur, Tomas J.; Kruizingas, Gerhard L.; Burkhart, P. Daniel; Wong, Mau C.; Abilleira, Fernando

2012-01-01

The Mars Science Laboratory (MSL), carrying the Curiosity rover to Mars, was launched on November 26, 2011, from Cape Canaveral, Florida. The target for MSL was selected to be Gale Crater, near the equator of Mars, with an arrival date in early August 2012. The two main interplanetary navigation tasks for the mission were to deliver the spacecraft to an entry interface point that would allow the rover to safely reach the landing area, and to tell the spacecraft where it entered the atmosphere of Mars, so it could guide itself accurately to close proximity of the landing target. MSL used entry guidance as it slowed down from the entry speed to a speed low enough to allow for a successful parachute deployment, and this guidance allowed shrinking the landing ellipse to a 99% conservative estimate of 7 by 20 kilometers. Since there is no global positioning system in Mars, achieving this accuracy was predicated on flying a trajectory that closely matched the reference trajectory used to design the guidance algorithm, and on initializing the guidance system with an accurate Mars-relative entry state that could be used as the starting point to integrate the inertial measurement unit data during entry and descent. The pre-launch entry flight path angle (EFPA) delivery requirement was +/- 0.20 deg, but after launch a smaller threshold of +/- 0.05 deg was used as the criteria for late trajectory correction maneuver (TCM) decisions. The pre-launch requirement for entry state knowledge was 2.8 kilometers in position error and 2 meters per second in velocity error, but also smaller thresholds were defined after launch to evaluate entry state update opportunities. The biggest challenge for the navigation team was to accurately predict the trajectory of the spacecraft, so the estimates of the entry conditions could be stable, and late trajectory correction maneuvers or entry parameter updates could be waved off. As a matter of fact, the prediction accuracy was such that the last TCM performed was a small burn executed eight days before landing, and the entry state that was calculated just 36 hours after that TCM, and that was uploaded to the spacecraft the same day, did not need to be updated. The final EFPA was 0.013 deg shallower than the -15.5 deg target, and the on-board entry state was just 200 meters in position and 0.11 meters per second in velocity from the post-landing reconstructed entry state. Overall the entry delivery and knowledge requirements were fulfilled with a margin of more than 90% with respect to the pre-launch thresholds. This excellent accuracy contributed to a very successful and accurate entry, descent, and landing, and surface mission.

Local activation time sampling density for atrial tachycardia contact mapping: how much is enough?

PubMed

Williams, Steven E; Harrison, James L; Chubb, Henry; Whitaker, John; Kiedrowicz, Radek; Rinaldi, Christopher A; Cooklin, Michael; Wright, Matthew; Niederer, Steven; O'Neill, Mark D

2018-02-01

Local activation time (LAT) mapping forms the cornerstone of atrial tachycardia diagnosis. Although anatomic and positional accuracy of electroanatomic mapping (EAM) systems have been validated, the effect of electrode sampling density on LAT map reconstruction is not known. Here, we study the effect of chamber geometry and activation complexity on optimal LAT sampling density using a combined in silico and in vivo approach. In vivo 21 atrial tachycardia maps were studied in three groups: (1) focal activation, (2) macro-re-entry, and (3) localized re-entry. In silico activation was simulated on a 4×4cm atrial monolayer, sampled randomly at 0.25-10 points/cm2 and used to re-interpolate LAT maps. Activation patterns were studied in the geometrically simple porcine right atrium (RA) and complex human left atrium (LA). Activation complexity was introduced into the porcine RA by incomplete inter-caval linear ablation. In all cases, optimal sampling density was defined as the highest density resulting in minimal further error reduction in the re-interpolated maps. Optimal sampling densities for LA tachycardias were 0.67 ± 0.17 points/cm2 (focal activation), 1.05 ± 0.32 points/cm2 (macro-re-entry) and 1.23 ± 0.26 points/cm2 (localized re-entry), P = 0.0031. Increasing activation complexity was associated with increased optimal sampling density both in silico (focal activation 1.09 ± 0.14 points/cm2; re-entry 1.44 ± 0.49 points/cm2; spiral-wave 1.50 ± 0.34 points/cm2, P < 0.0001) and in vivo (porcine RA pre-ablation 0.45 ± 0.13 vs. post-ablation 0.78 ± 0.17 points/cm2, P = 0.0008). Increasing chamber geometry was also associated with increased optimal sampling density (0.61 ± 0.22 points/cm2 vs. 1.0 ± 0.34 points/cm2, P = 0.0015). Optimal sampling densities can be identified to maximize diagnostic yield of LAT maps. Greater sampling density is required to correctly reveal complex activation and represent activation across complex geometries. Overall, the optimal sampling density for LAT map interpolation defined in this study was ∼1.0-1.5 points/cm2. Published on behalf of the European Society of Cardiology

Real-time advanced spinal surgery via visible patient model and augmented reality system.

PubMed

Wu, Jing-Ren; Wang, Min-Liang; Liu, Kai-Che; Hu, Ming-Hsien; Lee, Pei-Yuan

2014-03-01

This paper presents an advanced augmented reality system for spinal surgery assistance, and develops entry-point guidance prior to vertebroplasty spinal surgery. Based on image-based marker detection and tracking, the proposed camera-projector system superimposes pre-operative 3-D images onto patients. The patients' preoperative 3-D image model is registered by projecting it onto the patient such that the synthetic 3-D model merges with the real patient image, enabling the surgeon to see through the patients' anatomy. The proposed method is much simpler than heavy and computationally challenging navigation systems, and also reduces radiation exposure. The system is experimentally tested on a preoperative 3D model, dummy patient model and animal cadaver model. The feasibility and accuracy of the proposed system is verified on three patients undergoing spinal surgery in the operating theater. The results of these clinical trials are extremely promising, with surgeons reporting favorably on the reduced time of finding a suitable entry point and reduced radiation dose to patients. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The Japanese Preschool System in Transition

ERIC Educational Resources Information Center

Imoto, Yuki

2007-01-01

This article is an anthropological analysis of the recent policy reforms of the Japanese preschool system. It takes the introduction of the "nintei-kodomoen" ("accredited children's centre") as a point of entry to discuss the historical, social and political debates concerning early childhood education and care. The "dual…

Cassini Huygens entry and descent technologies

NASA Astrophysics Data System (ADS)

Scoon, G.; Whitcomb, G.; Eiden, M.; Smith, A.

1989-10-01

An overview of the Huygens Titan Atmosphere Probe of the Cassini mission is presented. The requirements of the various Probe systems are described and a synthesis is given of the relevant technology studies and development. The application of these studies to the Probe system design is briefly pointed out.

Multibody Parachute Flight Simulations for Planetary Entry Trajectories Using "Equilibrium Points"

NASA Technical Reports Server (NTRS)

Raiszadeh, Ben

2003-01-01

A method has been developed to reduce numerical stiffness and computer CPU requirements of high fidelity multibody flight simulations involving parachutes for planetary entry trajectories. Typical parachute entry configurations consist of entry bodies suspended from a parachute, connected by flexible lines. To accurately calculate line forces and moments, the simulations need to keep track of the point where the flexible lines meet (confluence point). In previous multibody parachute flight simulations, the confluence point has been modeled as a point mass. Using a point mass for the confluence point tends to make the simulation numerically stiff, because its mass is typically much less that than the main rigid body masses. One solution for stiff differential equations is to use a very small integration time step. However, this results in large computer CPU requirements. In the method described in the paper, the need for using a mass as the confluence point has been eliminated. Instead, the confluence point is modeled using an "equilibrium point". This point is calculated at every integration step as the point at which sum of all line forces is zero (static equilibrium). The use of this "equilibrium point" has the advantage of both reducing the numerical stiffness of the simulations, and eliminating the dynamical equations associated with vibration of a lumped mass on a high-tension string.

Atlas instrumentation guided by the medial edge of the posterior arch: An anatomic and radiologic study.

PubMed

Al-Habib, Amro F; Al-Rabie, Abdulkarim; Aleissa, Sami; Albakr, Abdulrahman; Abobotain, Abdulaziz

2017-01-01

This was an interventional human cadaver study and radiological study. Atlas instrumentation is frequently involved in fusion procedures involving the craniocervical junction area. Identification of the entry point at the center of atlas lateral mass (ALM) is challenging because of its rounded posterior surface and the surrounding venous plexus. This report examines using the medial edge of atlas posterior arch (MEC1) as a fixed and reliable anatomic reference to guide the entry point of ALM screws. Fifty, normal, cervical spine computed tomography studies were reviewed. ALM screw trajectories were planned at one point along MEC1 and another point 2 mm lateral to MEC1. Free-hand ALM instrumentation was performed in ten fresh human cadavers using the 2 mm entry point, with a sagittal trajectory parallel to atlas inferior arch (IAC1); three-dimensional imaging was then performed to confirm instrumentation accuracy. The average ALM diameter was 12.35 mm. Inserting a screw using the entry point 2 mm lateral to MEC1 was closer to ALM midpoint than using the entry point along MEC1 ( P < 0.0001). Twenty ALM screws were successfully inserted in the ten cadavers. No encroachments into the spinal canal or foramen transversarium occurred. However, two screws were superiorly directed and violated the occipitocervical joint; they were not parallel to IAC1. MEC1 provides a fixed and reliable landmark for ALM instrumentation. An entry point 2 mm point lateral to MEC1 is close to ALM midpoint. IAC1 also provides a guide for the sagittal trajectory. Attention to anatomic landmarks may help reduce complications associated with atlas instrumentation but should be verified in future clinical studies.

22 CFR 202.2 - Shipments eligible for reimbursement of freight charges.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and paid in transporting supplies donated to or purchased by such agencies from United States ports or... of entry in the recipient country or to points of entry in the recipient country in cases (1) of... time can be effected by the utilization of points of entry other than ports. (b) Shipments shall be...

BUD31 and Lipid Metabolism: A New Potential Therapeutic Entry Point for Myc-Driven Breast Cancer

DTIC Science & Technology

2016-02-01

AWARD NUMBER: W81XWH-14-1-0039 TITLE: BUD31 and Lipid Metabolism: A New Potential Therapeutic Entry Point for Myc-Driven Breast Cancer...TITLE AND SUBTITLE 5a. CONTRACT NUMBER BUD31 and Lipid Metabolism: A New Potential Therapeutic Entry Point for Myc-Driven Breast Cancer 5b. GRANT...To directly test the hypothesis above, we propose the following specific aims. AIM1: To determine if BUD31 interactions with lipid metabolism

INTERIOR OF ENTRY HALLWAY AND STEEL ENTRY DOOR ON SOUTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR OF ENTRY HALLWAY AND STEEL ENTRY DOOR ON SOUTH SIDE, VIEW FACING NORTHEAST. - Naval Air Station Barbers Point, Telephone Exchange, Coral Sea Road north of Bismarck Sea Road, Ewa, Honolulu County, HI

Social service offices as a point of entry into substance abuse treatment for poor South Africans

PubMed Central

2012-01-01

Background In South Africa, district social service offices are often the first point of entry into the substance abuse treatment system. Despite this, little is known about the profile of people presenting with substance-related problems at these service points. This has a negative impact on treatment service planning. This paper begins to redress this gap through describing patterns of substance use and service needs among people using general social services in the Western Cape and comparing findings against the profile of persons attending specialist substance abuse treatment facilities in the region. Methods As part of a standard client information system, an electronic questionnaire was completed for each person seeking social assistance. Data on socio-demographic characteristics, the range of presenting problems, patterns of substance use, perceived consequences of substance use, as well as types of services provided were analysed for the 691 social welfare clients who reported substance use between 2007 and 2009. These data were compared against clients attending substance abuse treatment centres during the same time period. Results Findings indicate that social services offices are used as a way of accessing specialist services but are also used as a service point, especially by groups under-represented in the specialist treatment sector. Women, people from rural communities and people with alcohol-related problems are more likely to seek assistance at social service offices providing low threshold intervention services than from the specialist treatment sector. Conclusions The study provides evidence that social services are a point of entry and intervention for people from underserved communities in the Western Cape. If these low-threshold services can be supported to provide good quality services, they may be an effective and efficient way of improving access to treatment in a context of limited service availability. PMID:22642796

Check Calibration of the NASA Glenn 10- by 10-Foot Supersonic Wind Tunnel (2014 Test Entry)

NASA Technical Reports Server (NTRS)

Johnson, Aaron; Pastor-Barsi, Christine; Arrington, E. Allen

2016-01-01

A check calibration of the 10- by 10-Foot Supersonic Wind Tunnel (SWT) was conducted in May/June 2014 using an array of five supersonic wedge probes to verify the 1999 Calibration. This check calibration was necessary following a control systems upgrade and an integrated systems test (IST). This check calibration was required to verify the tunnel flow quality was unchanged by the control systems upgrade prior to the next test customer beginning their test entry. The previous check calibration of the tunnel occurred in 2007, prior to the Mars Science Laboratory test program. Secondary objectives of this test entry included the validation of the new Cobra data acquisition system (DAS) against the current Escort DAS and the creation of statistical process control (SPC) charts through the collection of series of repeated test points at certain predetermined tunnel parameters. The SPC charts secondary objective was not completed due to schedule constraints. It is hoped that this effort will be readdressed and completed in the near future.

40 CFR 142.57 - Bottled water, point-of-use, and point-of-entry devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Bottled water, point-of-use, and point-of-entry devices. 142.57 Section 142.57 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS IMPLEMENTATION Exemptions Issued by the Administrator § 142.57...

Analytic Guidance for the First Entry in a Skip Atmospheric Entry

NASA Technical Reports Server (NTRS)

Garcia-Llama, Eduardo

2007-01-01

This paper presents an analytic method to generate a reference drag trajectory for the first entry portion of a skip atmospheric entry. The drag reference, expressed as a polynomial function of the velocity, will meet the conditions necessary to fit the requirements of the complete entry phase. The generic method proposed to generate the drag reference profile is further simplified by thinking of the drag and the velocity as density and cumulative distribution functions respectively. With this notion it will be shown that the reference drag profile can be obtained by solving a linear algebraic system of equations. The resulting drag profile is flown using the feedback linearization method of differential geometric control as guidance law with the error dynamics of a second order homogeneous equation in the form of a damped oscillator. This approach was first proposed as a revisited version of the Space Shuttle Orbiter entry guidance. However, this paper will show that it can be used to fly the first entry in a skip entry trajectory. In doing so, the gains in the error dynamics will be changed at a certain point along the trajectory to improve the tracking performance.

Using speech recognition to enhance the Tongue Drive System functionality in computer access.

PubMed

Huo, Xueliang; Ghovanloo, Maysam

2011-01-01

Tongue Drive System (TDS) is a wireless tongue operated assistive technology (AT), which can enable people with severe physical disabilities to access computers and drive powered wheelchairs using their volitional tongue movements. TDS offers six discrete commands, simultaneously available to the users, for pointing and typing as a substitute for mouse and keyboard in computer access, respectively. To enhance the TDS performance in typing, we have added a microphone, an audio codec, and a wireless audio link to its readily available 3-axial magnetic sensor array, and combined it with a commercially available speech recognition software, the Dragon Naturally Speaking, which is regarded as one of the most efficient ways for text entry. Our preliminary evaluations indicate that the combined TDS and speech recognition technologies can provide end users with significantly higher performance than using each technology alone, particularly in completing tasks that require both pointing and text entry, such as web surfing.

Semaphorin6A acts as a gate keeper between the central and the peripheral nervous system

PubMed Central

Mauti, Olivier; Domanitskaya, Elena; Andermatt, Irwin; Sadhu, Rejina; Stoeckli, Esther T

2007-01-01

Background During spinal cord development, expression of chicken SEMAPHORIN6A (SEMA6A) is almost exclusively found in the boundary caps at the ventral motor axon exit point and at the dorsal root entry site. The boundary cap cells are derived from a population of late migrating neural crest cells. They form a transient structure at the transition zone between the peripheral nervous system (PNS) and the central nervous system (CNS). Ablation of the boundary cap resulted in emigration of motoneurons from the ventral spinal cord along the ventral roots. Based on its very restricted expression in boundary cap cells, we tested for a role of Sema6A as a gate keeper between the CNS and the PNS. Results Downregulation of Sema6A in boundary cap cells by in ovo RNA interference resulted in motoneurons streaming out of the spinal cord along the ventral roots, and in the failure of dorsal roots to form and segregate properly. PlexinAs interact with class 6 semaphorins and are expressed by both motoneurons and sensory neurons. Knockdown of PlexinA1 reproduced the phenotype seen after loss of Sema6A function both at the ventral motor exit point and at the dorsal root entry site of the lumbosacral spinal cord. Loss of either PlexinA4 or Sema6D function had an effect only at the dorsal root entry site but not at the ventral motor axon exit point. Conclusion Sema6A acts as a gate keeper between the PNS and the CNS both ventrally and dorsally. It is required for the clustering of boundary cap cells at the PNS/CNS interface and, thus, prevents motoneurons from streaming out of the ventral spinal cord. At the dorsal root entry site it organizes the segregation of dorsal roots. PMID:18088409

The point of entry contributes to the organization of exploratory behavior of rats on an open field: an example of spontaneous episodic memory.

PubMed

Nemati, Farshad; Whishaw, Ian Q

2007-08-22

The exploratory behavior of rats on an open field is organized in that animals spend disproportionate amounts of time at certain locations, termed home bases, which serve as centers for excursions. Although home bases are preferentially formed near distinctive cues, including visual cues, animals also visit and pause and move slowly, or linger, at many other locations in a test environment. In order to further examine the organization of exploratory behavior, the present study examined the influence of the point of entry on animals placed on an open field table that was illuminated either by room light or infrared light (a wavelength in which they cannot see) and near which, or on which, distinctive cues were placed. The main findings were that in both room light and infrared light tests, rats visited and lingered at the point of entry significantly more often than comparative control locations. Although the rats also visited and lingered in the vicinity of salient visual cues, the point of entry still remained a focus of visits. Finally, the preference for the point of entry increased as a function of salience of the cues marking that location. That the point of entry influences the organization of exploratory behavior is discussed in relation to the idea that the exploratory behavior of the rat is directed toward optimizing security as well as forming a spatial representation of the environment.

Using Statechart Assertion for the Formal Validation and Verification of a Real-Time Software System: A Case Study

DTIC Science & Technology

2011-03-01

could be an entry point into a repeated task (or thread). The following example uses binary semaphores . The VxWorks operating system utilizes binary... semaphores via system calls: SemTake and SemGive. These semaphores are used primarily for mutual exclusion to protect resources from being accessed

REMOVAL OF CHEMICAL AND MICROBIAL CONTAMINANTS IN DRINKING WATER - WATTS PREMIER M-2400 POINT-OF-ENTRY REVERSE OSMOSIS DRINKINGWATER TREATMENT SYSTEM

EPA Science Inventory

The Watts Premier M-2400 POE RO Drinking Water Treatment System was tested at the NSF Drinking Water Treatment Systems Laboratory for removal of the viruses fr and MS2, the bacteria Brevundimonas diminuta, and chemicals aldicarb, benzene, cadmium, carbofuran, cesium, chl...

Planning Alternative Organizational Frameworks For a Large Scale Educational Telecommunications System Served by Fixed/Broadcast Satellites. Memorandum Number 73/3.

ERIC Educational Resources Information Center

Walkmeyer, John

Considerations relating to the design of organizational structures for development and control of large scale educational telecommunications systems using satellites are explored. The first part of the document deals with four issues of system-wide concern. The first is user accessibility to the system, including proximity to entry points, ability…

Accuracy of a real-time surgical navigation system for the placement of quad zygomatic implants in the severe atrophic maxilla: A pilot clinical study.

PubMed

Hung, Kuo-Feng; Wang, Feng; Wang, Hao-Wei; Zhou, Wen-Jie; Huang, Wei; Wu, Yi-Qun

2017-06-01

A real-time surgical navigation system potentially increases the accuracy when used for quad-zygomatic implant placement. To evaluate the accuracy of a real-time surgical navigation system when used for quad zygomatic implant placement. Patients with severely atrophic maxillae were prospectively recruited. Four trajectories for implants were planned, and zygomatic implants were placed using a real-time surgical navigation system. The planned-placed distance deviations at entry (entry deviation）points, exit (exit deviation) points, and angle deviation of axes (angle deviation) were measured on fused operation images. The differences of all the deviations between different groups, classified based on the lengths and locations of implants, were analysed. A P value of < 0.05 indicated statistical significance. Forty zygomatic implants were placed as planned in 10 patients. The entry deviation, exit deviation and angle deviation were 1.35 ± 0.75 mm, 2.15 mm ± 0.95 mm, and 2.05 ± 1.02 degrees, respectively. The differences of all deviations were not significant, irrespective of the lengths (P = .259, .158, and .914, respectively) or locations of the placed implants (P = .698, .072, and .602, respectively). A real-time surgical navigation system used for the placement of quad zygomatic implants demonstrated a high level of accuracy with only minimal planned-placed deviations, irrespective of the lengths or locations of the implants. © 2017 Wiley Periodicals, Inc.

Human Mars Entry, Descent and Landing Architectures Study Overview

NASA Technical Reports Server (NTRS)

Polsgrove, Tara T.; Dwyer Cianciolo, Alicia

2016-01-01

Landing humans on Mars will require entry, descent and landing (EDL) capability beyond the current state of the art. Nearly twenty times more delivered payload and an order of magnitude improvement in precision landing capability will be necessary. Several EDL technologies capable of meeting the human class payload delivery requirements are being considered. The EDL technologies considered include low lift-to-drag vehicles like Hypersonic Inflatable Aerodynamic Decelerators (HIAD), Adaptable Deployable Entry and Placement Technology (ADEPT), and mid range lift-to-drag vehicles like rigid aeroshell configurations. To better assess EDL technology options and sensitivities to future human mission design variations, a series of design studies has been conducted. The design studies incorporate EDL technologies with conceptual payload arrangements defined by the Evolvable Mars Campaign to evaluate the integrated system with higher fidelity than have been performed to date. This paper describes the results of the design studies for a lander design using the HIAD, ADEPT and rigid shell entry technologies and includes system and subsystem design details including mass and power estimates. This paper will review the point design for three entry configurations capable of delivering a 20 t human class payload to the surface of Mars.

Operational analysis for the drug detection problem

NASA Astrophysics Data System (ADS)

Hoopengardner, Roger L.; Smith, Michael C.

1994-10-01

New techniques and sensors to identify the molecular, chemical, or elemental structures unique to drugs are being developed under several national programs. However, the challenge faced by U.S. drug enforcement and Customs officials goes far beyond the simple technical capability to detect an illegal drug. Entry points into the U.S. include ports, border crossings, and airports where cargo ships, vehicles, and aircraft move huge volumes of freight. Current technology and personnel are able to physically inspect only a small fraction of the entering cargo containers. The complexities of how to best utilize new technology to aid the detection process and yet not adversely affect the processing of vehicles and time-sensitive cargo is the challenge faced by these officials. This paper describes an ARPA sponsored initiative to develop a simple, yet useful, method for examining the operational consequences of utilizing various procedures and technologies in combination to achieve an `acceptable' level of detection probability. Since Customs entry points into the U.S. vary from huge seaports to a one lane highway checkpoint between the U.S. and Canadian or Mexico border, no one system can possibly be right for all points. This approach can examine alternative concepts for using different techniques/systems for different types of entry points. Operational measures reported include the average time to process vehicles and containers, the average and maximum numbers in the system at any time, and the utilization of inspection teams. The method is implemented via a PC-based simulation written in GPSS-PC language. Input to the simulation model is (1) the individual detection probabilities and false positive rates for each detection technology or procedure, (2) the inspection time for each procedure, (3) the system configuration, and (4) the physical distance between inspection stations. The model offers on- line graphics to examine effects as the model runs.

Circulating moving bed system for CO.sub.2 separation, and method of same

DOEpatents

Elliott, Jeannine Elizabeth; Copeland, Robert James

2016-12-27

A circulating moving bed and process for separating a carbon dioxide from a gas stream is disclosed. The circulating moving bed can include an adsorption reactor and a desorption reactor, and a sorbent that moves through the two reactors. The sorbent can enter the adsorptive reactor and one end and move to an exit point distal to its entry point, while a CO.sub.2 feed stream can enter near the distal point and move countercurrently through the sorbent to exit at a position near the entry point of the sorbent. The sorbent can adsorb the CO.sub.2 by concentration swing adsorption and adsorptive displacement. The sorbent can then transfer to a regeneration reactor and can move countercurrently against a flow of steam through the regeneration reactor. The sorbent can be regenerated and the carbon dioxide recaptured by desorbing the carbon dioxide from the sorbent using concentration swing desorption and desorptive displacement with steam.

Intersections of Family Homelessness, CPS Involvement, and Race in Alameda County, California

PubMed Central

Shinn, Marybeth

2016-01-01

The homelessness and child protective services (CPS) systems are closely linked. This study examines the patterns and sequence of families’ involvement with homeless shelters and CPS, as well as whether involvement in each system predicts involvement in the other using linked administrative records for 258 families recruited in emergency shelters in Alameda County, California. More than half of families were reported to CPS at some point, but less than one fifth ever had a report substantiated. Reports that were uninvestigated or unfounded increased in the months leading up to shelter entry and spiked immediately afterward, but substantiations and child removals increased only later. Shelter use before study entry was associated with CPS referrals and investigations after study entry, although not with substantiated cases or child removals. However, CPS involvement before study entry was not associated with returns to shelter after study entry. These results imply that an unsubstantiated report of neglect or abuse may serve as an early warning signal for homelessness and that preventive strategies aiming to affect both homeless and child protective systems should focus on reducing homelessness. CPS workers should evaluate families’ housing needs and attempt to link families to appropriate resources. Black families were disproportionately referred to CPS after shelter entry after controlling for other family characteristics, but race was not associated with substantiations of neglect or abuse or with child removals. Findings lend modest support to human decision-making and institutional explanations of racial disproportionalities in CPS involvement, especially for reporters outside of the CPS system. PMID:27318034

22 CFR 202.7 - Documentation required for reimbursement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Voucher for Purchases and Services Other than Personal”—Voucher SF 1034 in original and three copies to be... relevant weights, cubic measurements, rates, and any applicable tariff surcharges. (2) To points of entry. (i) Where the shipment is made to a point of entry and through bills of lading to designated point of...

Hood entry coefficients of compound exhaust hoods.

PubMed

Figueroa, Crescente E

2011-12-01

A traditional method for assessing the flow rate in ventilation systems is based on multiple readings of velocity or velocity pressure (VP) (usually 10 or 20 points) taken in ductwork sections located away from fittings (> seven × diameters of straight duct). This study seeks to eliminate the need for a multiple-point evaluation and replace it with a simplified method that requires only a single measurement of hood static pressure (SP(h)) taken at a more accessible location (< three × diameters of straight duct from the hood entry). The SP(h) method is widely used for the assessment of flow rate in simple hoods. However, industrial applications quite often use compound hoods that are regularly of the slot/plenum type. For these hoods, a "compound coefficient of entry" has not been published, which makes the use of the hood static pressure method unfeasible. This study proposes a model for the computation of a "compound coefficient of entry" and validates the use of this model to assess flow rate in two systems of well-defined geometry (multi-slotted/plenum and single-slotted/tapered or "fish-tail" types). When using a conservative value of the slot loss factor (1.78), the proposed model yielded an estimate of the volumetric flow rate within 10% of that provided by a more comprehensive method of assessment. The simplicity of the hood static pressure method makes it very desirable, even in the upper range of experimental error found in this study.

A Longitudinal Study of Child Maltreatment and Mental Health Predictors of Admission to Psychiatric Residential Treatment Facilities

PubMed Central

Rose, Roderick A.; Lanier, Paul

2017-01-01

The child welfare system is an access point for children’s mental health services. Psychiatric residential treatment facilities (PRTFs) are the most restrictive, and most expensive setting for children to receive long-term care. Given the high rates of behavioral health concerns among maltreated children in out-of-home care, research is needed to examine the factors that predict entry in PRTFs among children investigated for maltreatment. This exploratory study used cross-sector administrative records linked across multiple systems, including child welfare records and Medicaid claims, from a single state over a five-year period (n = 105,982). Cox proportional hazards modeling was used to predict entry into a PRTF. After controlling for many factors, PRTF entry was predicted by diagnosis code indicating a trauma-related condition, antipsychotic medication prescriptions, and entry into lower levels of out-of-home care, supporting the view that youth are admitted to PRTFs largely due to clinical need. However, PRTF admission is also associated with characteristics of their experiences with the social service system, primarily foster care placement stability and permanency. Implications for practice and research are discussed. PMID:28956825

Usability Evaluation at the Point-of-Care: A Method to Identify User Information Needs in CPOE Applications

PubMed Central

Washburn, Jeff; Fiol, Guilherme Del; Rocha, Roberto A.

2006-01-01

Point of care usability evaluation may help identify information needs that occur during the process of providing care. We describe the process of using usability-specific recording software to record Computerized Physician Order Entry (CPOE) ordering sessions on admitted adult and pediatric patients at two urban tertiary hospitals in the Intermountain Healthcare system of hospitals. PMID:17238756

FNAL central email systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmidt, Jack; Lilianstrom, Al; Pasetes, Ray

2004-10-01

The FNAL Email System is the primary point of entry for email destined for an employee or user at Fermilab. This centrally supported system is designed for reliability and availability. It uses multiple layers of protection to help ensure that: (1) SPAM messages are tagged properly; (2) All mail is inspected for viruses; and (3) Valid mail gets delivered. This system employs numerous redundant subsystems to accomplish these tasks.

Point-of-entry treatment of petroleum contaminated water supplies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malley, J.P. Jr.; Eliason, P.A.; Wagler, J.L.

1993-03-01

Contamination of individual wells in rural area from leaking petroleum storage tanks poses unique problems for regulatory agencies utilities, and potentially responsible parties. A potential solution is the use of point-of-entry (POE) treatment techniques. Results indicate POE systems using aeration followed by granular activated carbon (GAC) are a viable, cost effective, short-term solution while ground water remediation is performed or an alternate drinking water supply is secured. Selection and design of POE systems should consider variations in water usage and contaminant concentrations. Iron and manganese did not affect POE system performance at the ten sites studied. However, iron precipitation wasmore » observed and may pose problems in some POE applications. Increased concentrations of nonpurgeable dissolved organic carbon consisting primarily of methy-t-butyl ether (MTBE) and hydrophilic petroleum hydrocarbons were found in the raw waters but did not affect volatile organic chemical (VOC) removals by aeration of GAC. Microbial activity as measured by heterotrophie plate count significantly increased through four of the ten POE systems studied. Reliability of the POE systems will best be achieved by specifying top quality system components, educating POE users, and providing routine maintenance and VOC monitoring. 20 refs., 9 figs., 4 tabs.« less

Outcomes of Computerized Physician Order Entry in an Electronic Health Record After Implementation in an Outpatient Oncology Setting

PubMed Central

Harshberger, Cara A.; Harper, Abigail J.; Carro, George W.; Spath, Wayne E.; Hui, Wendy C.; Lawton, Jessica M.; Brockstein, Bruce E.

2011-01-01

Purpose: Computerized physician order entry (CPOE) in electronic health records (EHR) has been recognized as an important tool in optimal health care provision that can reduce errors and improve safety. The objective of this study is to describe documentation completeness and user satisfaction of medical charts before and after implementation of an outpatient oncology EHR/ CPOE system in a hospital-based outpatient cancer center within three treatment sites. Methods: This study is a retrospective chart review of 90 patients who received one of the following regimens between 1999 and 2006: FOLFOX, AC, carboplatin + paclitaxel, ABVD, cisplatin + etoposide, R-CHOP, and clinical trials. Documentation completeness scores were assigned to each chart based on the number of documented data points found out of the total data points assessed. EHR/CPOE documentation completeness was compared with completeness of paper charts orders of the same regimens. A user satisfaction survey of the paper chart and EHR/CPOE system was conducted among the physicians, nurses, and pharmacists who worked with both systems. Results: The mean percentage of identified data points successfully found in the EHR/CPOE charts was 93% versus 67% in the paper charts (P < .001). Regimen complexity did not alter the number of data points found. The survey response rate was 64%, and the results showed that satisfaction was statistically significant in favor of the EHR/CPOE system. Conclusion: Using EHR/CPOE systems improves completeness of medical record and chemotherapy order documentation and improves user satisfaction with the medical record system. EHR/CPOE requires constant vigilance and maintenance to optimize patient safety. PMID:22043187

Legacy of the Space Shuttle from an Aerodynamic and Aerothermodynamic Perspective

NASA Technical Reports Server (NTRS)

Martin, Fred W.

2011-01-01

The development of the Space Shuttle Orbiter thermal protection system heating environment is described from a design stand point that began in the early 1970s. The desire for a light weight, reusable heat shield required the development of new technology, relative to previous manned spacecraft, and a systems approach to the design of the vehicle, entry guidance, and thermal protection system. Several unanticipated issues had to be resolved in both the entry and ascent phases of flight, which are discussed at a high level. During the life of the Program, significant improvements in computing power and numerical methods have been applied to Space Shuttle aerodynamic and aerothermodynamic issues, with the Shuttle Program often being the motivation, and or sponsor of the analysis development.

Accuracy of Novel Computed Tomography-Guided Frameless Stereotactic Drilling and Catheter System in Human Cadavers.

PubMed

Sankey, Eric W; Butler, Eric; Sampson, John H

2017-10-01

To evaluate accuracy of a computed tomography (CT)-guided frameless stereotactic drilling and catheter system. A prospective, single-arm study was performed using human cadaver heads to evaluate placement accuracy of a novel, flexible intracranial catheter and stabilizing bone anchor system and drill kit. There were 20 catheter placements included in the analysis. The primary endpoint was accuracy of catheter tip location on intraoperative CT. Secondary endpoints included target registration error and entry and target point error before and after drilling. Measurements are reported as mean ± SD (median, range). Target registration error was 0.46 mm ± 0.26 (0.50 mm, -1.00 to 1.00 mm). Two (10%) target point trajectories were negatively impacted by drilling. Intracranial catheter depth was 59.8 mm ± 9.4 (60.5 mm, 38.0-80.0 mm). Drilling angle was 22° ± 9 (21°, 7°-45°). Deviation between planned and actual entry point on CT was 1.04 mm ± 0.38 (1.00 mm, 0.40-2.00 mm). Deviation between planned and actual target point on CT was 1.60 mm ± 0.98 (1.40 mm, 0.40-4.00 mm). No correlation was observed between intracranial catheter depth and target point deviation (accuracy) (Pearson coefficient 0.018) or between technician experience and accuracy (Pearson coefficient 0.020). There was no significant difference in accuracy with trajectories performed for different cadaver heads (P = 0.362). Highly accurate catheter placement is achievable using this novel flexible catheter and bone anchor system placed via frameless stereotaxy, with an average deviation between planned and actual target point of 1.60 mm ± 0.98 (1.40 mm, 0.40-4.00 mm). Copyright © 2017 Elsevier Inc. All rights reserved.

The Other Homepage.

ERIC Educational Resources Information Center

Kupersmith, John

2003-01-01

Examines special-purpose entry points to library Web sites. Discusses in-house homepages; branch-specific pages or single library system-wide pages; staff use pages; versions in different languages; "MyLibrary" pages where users can customize the menu; standalone "branded" sites; publicly accessible pages; and best practices.…

An intravenous medication safety system: preventing high-risk medication errors at the point of care.

PubMed

Hatcher, Irene; Sullivan, Mark; Hutchinson, James; Thurman, Susan; Gaffney, F Andrew

2004-10-01

Improving medication safety at the point of care--particularly for high-risk drugs--is a major concern of nursing administrators. The medication errors most likely to cause harm are administration errors related to infusion of high-risk medications. An intravenous medication safety system is designed to prevent high-risk infusion medication errors and to capture continuous quality improvement data for best practice improvement. Initial testing with 50 systems in 2 units at Vanderbilt University Medical Center revealed that, even in the presence of a fully mature computerized prescriber order-entry system, the new safety system averted 99 potential infusion errors in 8 months.

Comparison of the effects of 23-gauge and 25-gauge microincision vitrectomy blade designs on incision architecture.

PubMed

Inoue, Makoto; Abulon, Dina Joy K; Hirakata, Akito

2014-01-01

To compare the effects of different 23- and 25-gauge microincision vitrectomy trocar cannula entry systems on incision architecture. We tested one ridged microvitreoretinal (MVR), one non-ridged MVR, one pointed beveled, and one round-tipped beveled blade (n=10 per blade design per incision type). Each blade's straight and oblique incision architecture was assessed in a silicone disc simulating the sclera. Wound leakage under pressure and endoscopic observations were conducted on sclerotomy sites of isolated porcine eyes (n=4 per blade design) after simulated vitrectomy. Differences in blade design created distinct incision architecture. Incisions were linear with the ridged MVR blade, flattened "M-shaped" with the non-ridged MVR blade, asymmetrical chevron-shaped with the pointed beveled blade, and curved with the round-tipped beveled blade. With the exception of oblique entry incision thickness, both MVR blade designs created thinner incisions than the beveled blades at entry and exit sites. Only the ridged MVR blade created incisions with no leakage. Vitreous incarceration was observed with all trocar cannula systems. Wound closure in porcine eyes was similar with all blades despite differences in incision architecture. Wound leakage occurred at low to moderate infusion pressures with most blades; no wound leakage was observed with ridged MVR blades.

Comparison of the effects of 23-gauge and 25-gauge microincision vitrectomy blade designs on incision architecture

PubMed Central

Inoue, Makoto; Abulon, Dina Joy K; Hirakata, Akito

2014-01-01

Purpose To compare the effects of different 23- and 25-gauge microincision vitrectomy trocar cannula entry systems on incision architecture. Methods We tested one ridged microvitreoretinal (MVR), one non-ridged MVR, one pointed beveled, and one round-tipped beveled blade (n=10 per blade design per incision type). Each blade’s straight and oblique incision architecture was assessed in a silicone disc simulating the sclera. Wound leakage under pressure and endoscopic observations were conducted on sclerotomy sites of isolated porcine eyes (n=4 per blade design) after simulated vitrectomy. Results Differences in blade design created distinct incision architecture. Incisions were linear with the ridged MVR blade, flattened “M-shaped” with the non-ridged MVR blade, asymmetrical chevron-shaped with the pointed beveled blade, and curved with the round-tipped beveled blade. With the exception of oblique entry incision thickness, both MVR blade designs created thinner incisions than the beveled blades at entry and exit sites. Only the ridged MVR blade created incisions with no leakage. Vitreous incarceration was observed with all trocar cannula systems. Conclusion Wound closure in porcine eyes was similar with all blades despite differences in incision architecture. Wound leakage occurred at low to moderate infusion pressures with most blades; no wound leakage was observed with ridged MVR blades. PMID:25429201

Simultaneous Tracking of Multiple Points Using a Wiimote

ERIC Educational Resources Information Center

Skeffington, Alex; Scully, Kyle

2012-01-01

This paper reviews the construction of an inexpensive motion tracking and data logging system, which can be used for a wide variety of teaching experiments ranging from entry-level physics courses to advanced courses. The system utilizes an affordable infrared camera found in a Nintendo Wiimote to track IR LEDs mounted to the objects to be…

THE CHARACTERIZATION AND IMPLEMENTATION OF AN ENHANCED ACTIVATED ALUMINA FOR THE REMOVAL OF DISSOLVED ARSENIC AT THE POINT OF ENTRY

EPA Science Inventory

Technical Challenge: Nearly 5.5% of the water systems in the United States are expected to exceed the new 10 ppb arsenic maximum contaminant level. Many of these systems are in small communities that require an affordable means of meeting these arsenic standards. ...

14 CFR Appendix B to Part 187 - Fees for FAA Services for Certain Flights

Code of Federal Regulations, 2010 CFR

2010-01-01

....-controlled airspace.) Distance flown is based on the great circle distance (GCD) for the point of entry and the point of exit of U.S.-controlled airspace based on FAA flight data. Fees are assessed using the methodology presented in paragraph (e)(2) of this appendix. Where actual entry and exit points are not...

Assessment of the State of the Art of Ultra High Temperature Ceramics

NASA Technical Reports Server (NTRS)

Johnson, Sylvia; Gasch, Matt; Stackpoole, Mairead

2009-01-01

Ultra High Temperature Ceramics (UHTCs) are a family of materials that includes the borides, carbides and nitrides of hafnium-, zirconium- and titanium-based systems. UHTCs are famous for possessing some of the highest melting points of known materials. In addition, they are very hard, have good wear resistance, mechanical strength, and relatively high thermal conductivities (compared to other ceramic materials). Because of these attributes, UHTCs are ideal for thermal protection systems, especially those that require chemical and structural stability at extremely high operating temperatures. UHTCs have the potential to revolutionize the aerospace industry by enabling the development of sharp hypersonic vehicles or atmospheric entry probes capable of the most extreme entry conditions.

Using Speech Recognition to Enhance the Tongue Drive System Functionality in Computer Access

PubMed Central

Huo, Xueliang; Ghovanloo, Maysam

2013-01-01

Tongue Drive System (TDS) is a wireless tongue operated assistive technology (AT), which can enable people with severe physical disabilities to access computers and drive powered wheelchairs using their volitional tongue movements. TDS offers six discrete commands, simultaneously available to the users, for pointing and typing as a substitute for mouse and keyboard in computer access, respectively. To enhance the TDS performance in typing, we have added a microphone, an audio codec, and a wireless audio link to its readily available 3-axial magnetic sensor array, and combined it with a commercially available speech recognition software, the Dragon Naturally Speaking, which is regarded as one of the most efficient ways for text entry. Our preliminary evaluations indicate that the combined TDS and speech recognition technologies can provide end users with significantly higher performance than using each technology alone, particularly in completing tasks that require both pointing and text entry, such as web surfing. PMID:22255801

Investigation of Transonic Wake Dynamics for Mechanically Deployable Entry Systems

NASA Technical Reports Server (NTRS)

Stern, Eric; Barnhardt, Michael; Venkatapathy, Ethiraj; Candler, Graham; Prabhu, Dinesh

2012-01-01

A numerical investigation of transonic flow around a mechanically deployable entry system being considered for a robotic mission to Venus has been performed, and preliminary results are reported. The flow around a conceptual representation of the vehicle geometry was simulated at discrete points along a ballistic trajectory using Detached Eddy Simulation (DES). The trajectory points selected span the low supersonic to transonic regimes with freestream Mach numbers from 1:5 to 0:8, and freestream Reynolds numbers (based on diameter) between 2:09 x 10(exp 6) and 2:93 x 10(exp 6). Additionally, the Mach 0:8 case was simulated at angles of attack between 0 and 5 . Static aerodynamic coefficients obtained from the data show qualitative agreement with data from 70deg sphere-cone wind tunnel tests performed for the Viking program. Finally, the effect of choices of models and numerical algorithms is addressed by comparing the DES results to those using a Reynolds Averaged Navier-Stokes (RANS) model, as well as to results using a more dissipative numerical scheme.

Analytic Development of a Reference Profile for the First Entry in a Skip Atmospheric Entry

NASA Technical Reports Server (NTRS)

Garcia-Llama, Eduardo

2010-01-01

This note shows that a feasible reference drag profile for the first entry portion of a skip entry can be generated as a polynomial expression of the velocity. The coefficients of that polynomial are found through the resolution of a system composed of m + 1 equations, where m is the degree of the drag polynomial. It has been shown that a minimum of five equations (m = 4) are required to establish the range and the initial and final conditions on velocity and flight path angle. It has been shown that at least one constraint on the trajectory can be imposed through the addition of one extra equation in the system, which must be accompanied by the increase in the degree of the drag polynomial. In order to simplify the resolution of the system of equations, the drag was considered as being a probability density function of the velocity, with the velocity as a distribution function of the drag. Combining this notion with the introduction of empirically derived constants, it has been shown that the system of equations required to generate the drag profile can be successfully reduced to a system of linear algebraic equations. For completeness, the resulting drag profiles have been flown using the feedback linearization method of differential geometric control as a guidance law with the error dynamics of a second order homogeneous equation in the form of a damped oscillator. Satisfactory results were achieved when the gains in the error dynamics were changed at a certain point along the trajectory that is dependent on the velocity and the curvature of the drag as a function of the velocity. Future work should study the capacity to update the drag profile in flight when dispersions are introduced. Also, future studies should attempt to link the first entry, as presented and controlled in this note, with a more standard control concept for the second entry, such as the Apollo entry guidance, to try to assess the overall skip entry performance. A guidance law that includes an integral feedback term, as is the case in the actual Space Shuttle entry guidance and as is proposed in Ref 29, could be tried in future studies to assess whether its use results in an improvement of the tracking performance, and to evaluate the design needs when determining the control gains.

76 FR 30417 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-25

... Change Amending Rule 7.31(h)(5) To Reduce the Minimum Order Entry Size of a Mid-Point Passive Liquidity... order entry size of a Mid-Point Passive Liquidity Order (``MPL Order'') from 100 shares to one share...

Re-Entry Point Targeting for LEO Spacecraft using Aerodynamic Drag

NASA Technical Reports Server (NTRS)

Omar, Sanny; Bevilacqua, Riccardo; Fineberg, Laurence; Treptow, Justin; Johnson, Yusef; Clark, Scott

2016-01-01

Most Low Earth Orbit (LEO) spacecraft do not have thrusters and re-enter atmosphere in random locations at uncertain times. Objects pose a risk to persons, property, or other satellites. Has become a larger concern with the recent increase in small satellites. Working on a NASA funded project to design a retractable drag device to expedite de-orbit and target a re-entry location through modulation of the drag area. Will be discussing the re-entry point targeting algorithm here.

Direct Comparison of a Tablet Computer and a Personal Digital Assistant for Point-of-Care Documentation in Eye Care

PubMed Central

Silvey, Garry M.; Macri, Jennifer M.; Lee, Paul P.; Lobach, David F.

2005-01-01

New mobile computing devices including personal digital assistants (PDAs) and tablet computers have emerged to facilitate data collection at the point of care. Unfortunately, little research has been reported regarding which device is optimal for a given care setting. In this study we created and compared functionally identical applications on a Palm operating system-based PDA and a Windows-based tablet computer for point-of-care documentation of clinical observations by eye care professionals when caring for patients with diabetes. Eye-care professionals compared the devices through focus group sessions and through validated usability surveys. We found that the application on the tablet computer was preferred over the PDA for documenting the complex data related to eye care. Our findings suggest that the selection of a mobile computing platform depends on the amount and complexity of the data to be entered; the tablet computer functions better for high volume, complex data entry, and the PDA, for low volume, simple data entry. PMID:16779128

RADON REMOVAL BY POINT-OF-ENTRY GRANULAR ACTIVATED CARBON SYSTEMS: DESIGN PERFORMANCE AND COST

EPA Science Inventory

The report summarizes previous research conducted by Lowry Engineering, Inc. (LEI), the Maine Department of Human Services, Division of Health Engineering, and the University of Maine, Department of Civil Engineering, on the removal of Rn from drinking water supplies using granul...

Injector Design for a Model Electron Ring at the University of Maryland

NASA Astrophysics Data System (ADS)

Godlove, T.; Bernal, S.; Deng, J. J.; Li, Y.; Reiser, M.; Wang, J. G.; Zou, Y.

1997-05-01

A model electron recirculator is being developed at the University of Maryland. It employs a 10-keV, space-charge-dominated beam injected into a 1.8-m radius ring equipped with a strong-focusing lattice based on printed-circuit quadrupoles and dipoles. The motivation and general features are described in separate papers. Here we describe the design for injecting a single-turn bunch into the ring. The system includes a low-emittance e-gun, matching section, pulsed dipole and Panofsky quadrupole. The dipole at the injection point must deflect the beam -10^circ during entry and +10^circ after entry, with about 25 ns transition time. The Panofsky quadrupole must be off during entry and on for subsequent laps, with a similar rise time.

Development of Supersonic Retro-Propulsion for Future Mars Entry, Descent, and Landing Systems

NASA Technical Reports Server (NTRS)

Edquist, Karl T.; Dyakonov, Artem A.; Shidner, Jeremy D.; Studak, Joseph W.; Tiggers, Michael A.; Kipp, Devin M.; Prakash, Ravi; Trumble, Kerry A.; Dupzyk, Ian C.; Korzun, Ashley M.

2010-01-01

Recent studies have concluded that Viking-era entry system technologies are reaching their practical limits and must be succeeded by new methods capable of delivering large payloads (greater than 10 metric tons) required for human exploration of Mars. One such technology, termed Supersonic Retro-Propulsion, has been proposed as an enabling deceleration technique. However, in order to be considered for future NASA flight projects, this technology will require significant maturation beyond its current state. This paper proposes a roadmap for advancing the component technologies to a point where Supersonic Retro-Propulsion can be reliably used on future Mars missions to land much larger payloads than are currently possible using Viking-based systems. The development roadmap includes technology gates that are achieved through testing and/or analysis, culminating with subscale flight tests in Earth atmosphere that demonstrate stable and controlled flight. The component technologies requiring advancement include large engines capable of throttling, computational models for entry vehicle aerodynamic/propulsive force and moment interactions, aerothermodynamic environments modeling, entry vehicle stability and control methods, integrated systems engineering and analyses, and high-fidelity six degree-of-freedom trajectory simulations. Quantifiable metrics are also proposed as a means to gage the technical progress of Supersonic Retro-Propulsion. Finally, an aggressive schedule is proposed for advancing the technology through sub-scale flight tests at Earth by 2016.

Models of initial training and pathways to registration: a selective review of policy in professional regulation.

PubMed

Fealy, Gerard M; Carney, Marie; Drennan, Jonathan; Treacy, Margaret; Burke, Jacqueline; O'Connell, Dympna; Howley, Breeda; Clancy, Alison; McHugh, Aine; Patton, Declan; Sheerin, Fintan

2009-09-01

To provide a synthesis of literature on international policy concerning professional regulation in nursing and midwifery, with reference to routes of entry into training and pathways to licensure. Internationally, there is evidence of multiple points of entry into initial training, multiple divisions of the professional register and multiple pathways to licensure. Policy documents and commentary articles concerned with models of initial training and pathways to licensure were reviewed. Item selection, quality appraisal and data extraction were undertaken and documentary analysis was performed on all retrieved texts. Case studies of five Western countries indicate no single uniform system of routes of entry into initial training and no overall consensus regarding the optimal model of initial training. Multiple regulatory systems, with multiple routes of entry into initial training and multiple pathways to licensure pose challenges, in terms of achieving commonly-agreed understandings of practice competence. The variety of models of initial training present nursing managers with challenges in the recruitment and deployment of personnel trained in many different jurisdictions. Nursing managers need to consider the potential for considerable variation in competency repertoires among nurses trained in generic and specialist initial training models.

Side-Branch and Coaxial Intravascular Ultrasound Guided Wire Re-Entry after Failed Retrograde Approach of Chronic Total Occlusion Intervention.

PubMed

Chou, Ruey-Hsing; Lai, Chih-Hung; Lu, Tse-Min

2016-05-01

Intravascular ultrasound (IVUS) can provide valuable information during the intervention of difficult chronic total occlusion (CTO) lesion. Stumpless CTO lesions with an adjacent side branch are associated with a significantly lower success rate because the proper entry point is not always clearly identified and the guidewires easily slip into the side branch. Herein we presented a case of a stumpless middle left circumflex (LCX) artery CTO lesion with auto-collateral from obtuse marginal branch. Initially, we positioned the IVUS into the side-branch to find the entry point of LCX-CTO lesion. However, the punctured wire went into the false lumen. A retrograde approach was tried but later failed. Therefore, we used IVUS to find the entry point where the true lumen transited to the false lumen, and used a stiff guidewire to puncture the entry point. After we confirmed with IVUS that the whole guidewire was in the true lumen, we deployed 3 drug-eluting stents. The final angiogram showed TIMI 3 flow with preservation of all side branches. The patient was angina-free during the 6-month follow-up. By presenting this case, we have demonstrated the application of both side-branch and coaxial IVUS-guided recanalization technique in the stumpless CTO lesion.

78 FR 76614 - Resolution of Systemically Important Financial Institutions: The Single Point of Entry Strategy

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-18

... banking agency or other primary financial regulatory agency; (5) retention of accounting and valuation... financial company's independent accounting firm. Additional controls may be imposed by the FDIC as... principles and applicable SEC requirements. The FDIC has consulted with the SEC regarding the accounting...

Technical Note [cmUse of a Snare Wire to Perform Nephrostomy Access in the Presence of Obstructive Staghorn Calculi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nosher, John L.; Siegel, Randall L.; Bodner, Leonard J.

1996-05-15

We describe a technique for gaining access to the central collecting system via a chosen calyx, utilizing an alternative entry point to that calyx. An Amplatz nitinol loop snare is then used to convert this access to a traditional approach.

48 CFR 252.232-7006 - Wide Area WorkFlow Payment Instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

...— (1) Have a designated electronic business point of contact in the System for Award Management at... submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol... that uniquely identifies a unit, activity, or organization. Document type means the type of payment...

48 CFR 252.232-7006 - Wide Area WorkFlow Payment Instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...— (1) Have a designated electronic business point of contact in the System for Award Management at... submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol... that uniquely identifies a unit, activity, or organization. Document type means the type of payment...

RADON REMOVAL USING POINT-OF-ENTRY WATER TREATMENT TECHNIQUES

EPA Science Inventory

The purpose of the EPA Cooperative Agreement was to evaluate the performance of POE granular activated carbon (GAC), and diffused bubble and bubble place aeration systems treating a ground water supply containing radon (35,620 ±6,717 pCi/L). The pattern of loading to the uni...

Assessment for All.

ERIC Educational Resources Information Center

Dockrell, William B.

Scotland, like many countries, has a system of externally-administered syllabus-based examinations, set at two points: the end of compulsory schooling, which serves as a basis for entry to junior college "non-advanced further education" (mainly vocationally oriented); and at the end of grade 12, which serves as a basis for admission to…

An analysis of the adaptability of Loran-C to air navigation

NASA Technical Reports Server (NTRS)

Littlefield, J. A.

1981-01-01

The sources of position errors characteristics of the Loran-C navigation system were identified. Particular emphasis was given to their point on entry as well as their elimination. It is shown that the ratio of realized accuracy to theoretical accuracy of the Loran-C is highly receiver dependent.

Using dBASE II for Bibliographic Files.

ERIC Educational Resources Information Center

Sullivan, Jeanette

1985-01-01

Describes use of a database management system (dBASE II, produced by Ashton-Tate), noting best features and disadvantages. Highlights include data entry, multiple access points available, training requirements, use of dBASE for a bibliographic application, auxiliary software, and dBASE updates. Sample searches, auxiliary programs, and requirements…

Retrieval techniques and graphics displays using a computerized stellar data base

NASA Technical Reports Server (NTRS)

Mead, J.; Nagy, T. A.

1977-01-01

The paper describes a stellar data retrieval system for which the data base consists of 28 machine-readable astronomical catalogs. Eleven of these catalogs have been combined into the Goddard Cross Index (GCI), which serves as the computer entry point to these catalogs. The full data entry from any of the GCI catalogs can be retrieved in a single computer run. With this system, it is possible to prepare candidates for observation by searching the data base for stars with given characteristics. Generation of plots of all catalog stars in or near the telescope's field of view to scale of Palomar, other atlases, or to the telescope itself for use as observing charts or to aid in identifying unknown sources, can be accomplished.

An evaluation of Shuttle Entry Air Data System (SEADS) flight pressures - Comparisons with wind tunnel and theoretical predictions

NASA Technical Reports Server (NTRS)

Henry, M. W.; Wolf, H.; Siemers, Paul M., III

1988-01-01

The SEADS pressure data obtained from the Shuttle flight 61-C are analyzed in conjunction with the preflight database. Based on wind tunnel data, the sensitivity of the Shuttle Orbiter stagnation region pressure distribution to angle of attack and Mach number is demonstrated. Comparisons are made between flight and wind tunnel SEADS orifice pressure distributions at several points throughout the re-entry. It is concluded that modified Newtonian theory provides a good tool for the design of a flush air data system, furnishing data for determining orifice locations and transducer sizing. Ground-based wind tunnel facilities are capable of providing the correction factors necessary for the derivation of accurate air data parameters from pressure data.

The Inside, Out: Diaries as Entry Points to Historical Perspective-Taking

ERIC Educational Resources Information Center

Lemisko, Lynn

2010-01-01

Diaries can serve as meaningful entry points for advancing historical consciousness and develop historical thinking (Seixas, 2002) because they can connect readers/learners with the diverse emotions, thoughts and motivations of the people who wrote them in particular times and particular places. According to philosopher and historian, R.G.…

The entry-level occupational therapy clinical doctorate: advantages, challenges, and international issues to consider.

PubMed

Brown, Ted; Crabtree, Jeffrey L; Mu, Keli; Wells, Joe

2015-04-01

Internationally, occupational therapy education has gone through several paradigm shifts during the last few decades, moving from certificate to diploma to bachelors to masters and now in some instances to clinical doctorate as the entry-level professional credential to practice. In the United States there is a recommendation under consideration by the American Occupational Therapy Association (AOTA) that by 2025, all occupational therapy university programs will move to the clinical doctorate level. It should be noted, however, that the AOTA Board can only make recommendations and it is the Accreditation Council for Occupational Therapy Education (ACOTE) who has regulatory authority to approve such a change. What are the potential implications for the profession, our clients, and funders of occupational therapy services? What are the primary drivers for the move towards the clinical doctorate being the educational entry point? Is the next step in the evolution of occupational therapy education globally a shift to the entry-level clinical doctorate? This article reviews current literature and discusses issues about the occupational therapy entry-level clinical doctorate. The published evidence available about the occupational therapy entry-level clinical doctorate is summarized and the perceived or frequently cited pros and cons of moving to the clinical doctorate as the singular entry point to occupational therapy practice are considered. The potential impacts of the introduction of the clinical doctorate as the entry-to-practice qualification across the United States on the occupational therapy community internationally will be briefly discussed. If the United States moves toward the entry-level clinical doctorate as the only educational starting point for the profession, will other jurisdictions follow suit? Further discourse and investigation of this issue both inside and outside of the United States is needed so that informed decisions can be made.

Characteristics of Coupled Nongray Radiating Gas Flows with Ablation Product Effects About Blunt Bodies During Planetary Entries. Ph.D. Thesis - North Carolina State Univ.

NASA Technical Reports Server (NTRS)

Sutton, K.

1973-01-01

A computational method was developed for the fully-coupled solution of nongray, radiating gas flows with ablation product effects about blunt bodies during planetary entries. The treatment of radiation accounts for molecular band, continuum, and atomic line transitions with a detailed frequency dependence of the absorption coefficient. The ablation of the entry body was solved as part of the solution for a steady-state ablation process. The method was applied by results at typical conditions during entry to Venus. The radiative heating rates along the downstream region of the body can exceed the stagnation point value. The radiative heating to the body is attenuated in the boundary layer at the downstream region of the body and at the stagnation point of the body. A study of the radiation, inviscid flow about spherically capped, conical bodies during planetary entries shows that the nondimensional, radiative heating distributions are nonsimilar with entry conditions. Caution should be exercised in attempting to extrapolate results from known distributions to other entry conditions for which solutions have not yet been obtained.

Multi-ray-based system matrix generation for 3D PET reconstruction

NASA Astrophysics Data System (ADS)

Moehrs, Sascha; Defrise, Michel; Belcari, Nicola; DelGuerra, Alberto; Bartoli, Antonietta; Fabbri, Serena; Zanetti, Gianluigi

2008-12-01

Iterative image reconstruction algorithms for positron emission tomography (PET) require a sophisticated system matrix (model) of the scanner. Our aim is to set up such a model offline for the YAP-(S)PET II small animal imaging tomograph in order to use it subsequently with standard ML-EM (maximum-likelihood expectation maximization) and OSEM (ordered subset expectation maximization) for fully three-dimensional image reconstruction. In general, the system model can be obtained analytically, via measurements or via Monte Carlo simulations. In this paper, we present the multi-ray method, which can be considered as a hybrid method to set up the system model offline. It incorporates accurate analytical (geometric) considerations as well as crystal depth and crystal scatter effects. At the same time, it has the potential to model seamlessly other physical aspects such as the positron range. The proposed method is based on multiple rays which are traced from/to the detector crystals through the image volume. Such a ray-tracing approach itself is not new; however, we derive a novel mathematical formulation of the approach and investigate the positioning of the integration (ray-end) points. First, we study single system matrix entries and show that the positioning and weighting of the ray-end points according to Gaussian integration give better results compared to equally spaced integration points (trapezoidal integration), especially if only a small number of integration points (rays) are used. Additionally, we show that, for a given variance of the single matrix entries, the number of rays (events) required to calculate the whole matrix is a factor of 20 larger when using a pure Monte-Carlo-based method. Finally, we analyse the quality of the model by reconstructing phantom data from the YAP-(S)PET II scanner.

Natural Resource Management Schemes as Entry Points for Integrated Landscape Approaches: Evidence from Ghana and Burkina Faso.

PubMed

Foli, Samson; Ros-Tonen, Mirjam A F; Reed, James; Sunderland, Terry

2018-07-01

In recognition of the failures of sectoral approaches to overcome global challenges of biodiversity loss, climate change, food insecurity and poverty, scientific discourse on biodiversity conservation and sustainable development is shifting towards integrated landscape governance arrangements. Current landscape initiatives however very much depend on external actors and funding, raising the question of whether, and how, and under what conditions, locally embedded resource management schemes can serve as entry points for the implementation of integrated landscape approaches. This paper assesses the entry point potential for three established natural resource management schemes in West Africa that target landscape degradation with involvement of local communities: the Chantier d'Aménagement Forestier scheme encompassing forest management sites across Burkina Faso and the Modified Taungya System and community wildlife resource management initiatives in Ghana. Based on a review of the current literature, we analyze the extent to which design principles that define a landscape approach apply to these schemes. We found that the CREMA meets most of the desired criteria, but that its scale may be too limited to guarantee effective landscape governance, hence requiring upscaling. Conversely, the other two initiatives are strongly lacking in their design principles on fundamental components regarding integrated approaches, continual learning, and capacity building. Monitoring and evaluation bodies and participatory learning and negotiation platforms could enhance the schemes' alignment with integrated landscape approaches.

Process for Administering Distributed Academic Competitions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feibush, Eliot

2010-02-04

Currently, academic-type competitions are scored using a combination of timer clocks, entries on paper, and individual computers to consolidate individual entries. Such a system is unwieldy, time-consuming, and depends on the individual computer skills that might be present amount the competition administrators. The new Academic Competition Software combines digital clocks, along with a scoring system that permits different point values for different types of questions. Bonus or ‚Âœtoss-up‚ questions can be monitored during the competition, using a subtimer system. All data is consolidated on the fly and the system can be operated by a single person. Results from different sitesmore » (rooms) can be added in as well. As such, the software is extremely flexible. It is anticipated that this new software will be useful for‚Science or Science Olympiad type competitions held in many high schools and colleges, as well as for preparation and training for such competitions.« less

An image guidance system for positioning robotic cochlear implant insertion tools

NASA Astrophysics Data System (ADS)

Bruns, Trevor L.; Webster, Robert J.

2017-03-01

Cochlear implants must be inserted carefully to avoid damaging the delicate anatomical structures of the inner ear. This has motivated several approaches to improve the safety and efficacy of electrode array insertion by automating the process with specialized robotic or manual insertion tools. When such tools are used, they must be positioned at the entry point to the cochlea and aligned with the desired entry vector. This paper presents an image guidance system capable of accurately positioning a cochlear implant insertion tool. An optical tracking system localizes the insertion tool in physical space while a graphical user interface incorporates this with patient- specific anatomical data to provide error information to the surgeon in real-time. Guided by this interface, novice users successfully aligned the tool with an mean accuracy of 0.31 mm.

A Survey of Supersonic Retropropulsion Technology for Mars Entry, Descent, and Landing

NASA Technical Reports Server (NTRS)

Korzun, Ashley M.; Cruz, Juan R.; Braun, Robert D.

2007-01-01

This paper presents a literature survey on supersonic retropropulsion technology as it applies to Mars entry, descent, and landing (EDL). The relevance of this technology to the feasibility of Mars EDL is shown to increase with ballistic coefficient to the point that it is likely required for human Mars exploration. The use of retropropulsion to decelerate an entry vehicle from hypersonic or supersonic conditions to a subsonic velocity is the primary focus of this review. Discussed are systems-level studies, general flowfield characteristics, static aerodynamics, vehicle and flowfield stability considerations, and aerothermodynamics. The experimental and computational approaches used to develop retropropulsion technology are also reviewed. Finally, the applicability and limitations of the existing literature and current state-of-the-art computational tools to future missions are discussed in the context of human and robotic Mars exploration.

Entry Points When Undergraduate Research Mentors Reflect on Their Role: A Qualitative Case Study

ERIC Educational Resources Information Center

Wallin, Patric; Adawi, Tom

2018-01-01

Graduate students and postdoctoral researchers are increasingly taking on mentoring roles in undergraduate research (UR). There is, however, a paucity of research focusing on how they conceptualize their mentoring role. In this qualitative interview study, we identified three entry points that mentors reflect on to define their role: (1) What are…

A Success Model for Low-Income Students

ERIC Educational Resources Information Center

Wilt, Richard W.

2006-01-01

Today's community college serves as the entry point to well-paying technical jobs as well as the entry point to the baccalaureate degree and beyond. What, then, can be done to ensure that low-income students have access to and success in community colleges? Research, both theoretical and empirical, shows that there is no one student characteristic…

Vocational Preference Inventory High Point Codes Versus Expressed Choices as Predictors of College Major and Career Entry

ERIC Educational Resources Information Center

Gade, Eldon M.; Soliah, David

1975-01-01

For 151 male graduates of the University of North Dakota, expressed choices measured by preferences made as high school seniors on the ACT Student Profile Section were significantly more accurate predictors of graduating college major and of career entry occupation than were their Vocational Preference Inventory high point codes. (Author)

Safe insertion of S-2 alar iliac screws: radiological comparison between 2 insertion points using computed tomography and 3D analysis software.

PubMed

Yamada, Kentaro; Abe, Yuichiro; Satoh, Shigenobu

2018-05-01

OBJECTIVE S-2 alar iliac (S2AI) screws are commonly used as anchors for lumbosacral fixation. A serious potential complication of screw insertion is major vascular injury due to anterior or caudal screw deviation. To avoid screw deviation, the pelvic inlet view on intraoperative fluoroscopy images is recommended. However, there has been no detailed investigation of optimal fluoroscopic incline with the pelvic inlet view. The purpose of this study was to investigate the safety margins and to optimize fluoroscopic settings to avoid screw deviation with 2 reported insertion techniques using 3D analysis software and CT. METHODS The study included 50 patients (25 men and 25 women) who underwent abdominal-pelvic CT. With the use of software, the ideal S2AI screws were set from 2 entry points: A) the midpoint between the S-1 dorsal foramen and the S-2 dorsal foramen where they meet the lateral sacral crest, and B) 1 mm inferior and 1 mm lateral to the S-1 dorsal foramen. Anteriorly or caudally deviated screws were defined as deviation of a half thread of the ideal screw by rotation anteriorly or caudally from the entry point. The angular safety margins were compared between the 2 entry points, and patients with small safety margins were investigated. Subsequently, fluoroscopic images were virtualized on ray sum-rendered images. Conditions that provided proper recognition of screw deviation were investigated via lateral and anteroposterior views with the beam tilted caudally. RESULTS The safety margins of S2AI screws were smaller in the anterior direction than in the caudal direction and by entry point A than by entry point B (A: 9.1° ± 1.6° and B: 9.7° ± 1.5° in the anterior direction; A: 10.9° ± 3.8° and B: 13.9° ± 4.1° in the caudal direction). In contrast, patients with a deep-seated L-5 vertebral body tended to have smaller safety margins in the caudal direction. All anteriorly deviated screws were recognized with a 60°-70° inlet view from the S-1 slope. The caudally deviated screws were all recognized on the lateral view, but 31% of screws at entry point A and 21% of screws at entry point B were not recognized on the pelvic inlet view. CONCLUSIONS S2AI screws should be carefully placed to avoid anterior deviation compared with caudal deviation in terms of the safety margin, except in patients with a deep-seated L-5. The difference in safety margins between entry points A and B was negligible. Intraoperative fluoroscopy is recommended with a pelvic inlet view tilted 60°-70° from the S-1 slope to avoid anterior screw deviation. The lateral view is recommended to confirm that the screw is not deviated caudally.

Comparison of Two Entry Methods for Laparoscopic Port Entry: Technical Point of View

PubMed Central

Toro, Adriana; Mannino, Maurizio; Cappello, Giovanni; Di Stefano, Andrea; Di Carlo, Isidoro

2012-01-01

Laparoscopic entry is a blind procedure and it often represents a problem for all the related complications. In the last three decades, rapid advances in laparoscopic surgery have made it an invaluable part of general surgery, but there remains no clear consensus on an optimal method of entry into the peritoneal cavity. The aim of this paper is to focus on the evolution of two used methods of entry into the peritoneal cavity in laparoscopic surgery. PMID:22761542

Designing Search: Effective Search Interfaces for Academic Library Web Sites

ERIC Educational Resources Information Center

Teague-Rector, Susan; Ghaphery, Jimmy

2008-01-01

Academic libraries customize, support, and provide access to myriad information systems, each with complex graphical user interfaces. The number of possible information entry points on an academic library Web site is both daunting to the end-user and consistently challenging to library Web site designers. Faced with the challenges inherent in…

48 CFR 34.005-2 - Mission-oriented solicitation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the Governmentwide point of entry (see subpart 5.2) and should be sent to as wide a selection of... presolicitation conference (see 15.201) and/or send copies of the proposed solicitation to all prospective..., and capability goals. (6) Require the use of an Earned Value Management System that complies with the...

48 CFR 34.005-2 - Mission-oriented solicitation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the Governmentwide point of entry (see subpart 5.2) and should be sent to as wide a selection of... presolicitation conference (see 15.201) and/or send copies of the proposed solicitation to all prospective..., and capability goals. (6) Require the use of an Earned Value Management System that complies with the...

Complex Intervention: A Family's Story of Loss, Struggle, and Perseverance

ERIC Educational Resources Information Center

Njoroge, Wanjiku F. M.

2015-01-01

This article reveals the complicated relationships among culture, family, trauma, and service delivery for immigrant families. The author describes a family who first came into contact with the service delivery system referred by the pediatrician, whose practice was an important point of entry for the early childhood work that followed. The family…

Mental Health Referrals: A Survey of Practicing School Psychologists

ERIC Educational Resources Information Center

Villarreal, Victor

2018-01-01

Schools are the most common entry point for accessing mental health services for school-age children. Children may access school-based services as part of a multitiered system of supports or other service models, such as school-based health centers. However, limitations associated with school-based services (e.g., lack of time, inability to…

Comparing conventional and computer-assisted surgery baseplate and screw placement in reverse shoulder arthroplasty.

PubMed

Venne, Gabriel; Rasquinha, Brian J; Pichora, David; Ellis, Randy E; Bicknell, Ryan

2015-07-01

Preoperative planning and intraoperative navigation technologies have each been shown separately to be beneficial for optimizing screw and baseplate positioning in reverse shoulder arthroplasty (RSA) but to date have not been combined. This study describes development of a system for performing computer-assisted RSA glenoid baseplate and screw placement, including preoperative planning, intraoperative navigation, and postoperative evaluation, and compares this system with a conventional approach. We used a custom-designed system allowing computed tomography (CT)-based preoperative planning, intraoperative navigation, and postoperative evaluation. Five orthopedic surgeons defined common preoperative plans on 3-dimensional CT reconstructed cadaveric shoulders. Each surgeon performed 3 computer-assisted and 3 conventional simulated procedures. The 3-dimensional CT reconstructed postoperative units were digitally matched to the preoperative model for evaluation of entry points, end points, and angulations of screws and baseplate. Values were used to find accuracy and precision of the 2 groups with respect to the defined placement. Statistical analysis was performed by t tests (α = .05). Comparison of the groups revealed no difference in accuracy or precision of screws or baseplate entry points (P > .05). Accuracy and precision were improved with use of navigation for end points and angulations of 3 screws (P < .05). Accuracy of the inferior screw showed a trend of improvement with navigation (P > .05). Navigated baseplate end point precision was improved (P < .05), with a trend toward improved accuracy (P > .05). We conclude that CT-based preoperative planning and intraoperative navigation allow improved accuracy and precision for screw placement and precision for baseplate positioning with respect to a predefined placement compared with conventional techniques in RSA. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Origin of bistability underlying mammalian cell cycle entry

PubMed Central

Yao, Guang; Tan, Cheemeng; West, Mike; Nevins, Joseph R; You, Lingchong

2011-01-01

Precise control of cell proliferation is fundamental to tissue homeostasis and differentiation. Mammalian cells commit to proliferation at the restriction point (R-point). It has long been recognized that the R-point is tightly regulated by the Rb–E2F signaling pathway. Our recent work has further demonstrated that this regulation is mediated by a bistable switch mechanism. Nevertheless, the essential regulatory features in the Rb–E2F pathway that create this switching property have not been defined. Here we analyzed a library of gene circuits comprising all possible link combinations in a simplified Rb–E2F network. We identified a minimal circuit that is able to generate robust, resettable bistability. This minimal circuit contains a feed-forward loop coupled with a mutual-inhibition feedback loop, which forms an AND-gate control of the E2F activation. Underscoring its importance, experimental disruption of this circuit abolishes maintenance of the activated E2F state, supporting its importance for the bistability of the Rb–E2F system. Our findings suggested basic design principles for the robust control of the bistable cell cycle entry at the R-point. PMID:21525871

Taiwan's Travel and Border Health Measures in Response to Zika.

PubMed

Ho, Li-Li; Tsai, Yu-Hui; Lee, Wang-Ping; Liao, Szu-Tsai; Wu, Li-Gin; Wu, Yi-Chun

Zika virus has recently emerged as a worldwide public health concern. Travel and border health measures stand as one of the main strategies and frontline defenses in responding to international epidemics. As of October 31, 2016, Taiwan has reported 13 imported cases, 5 of which were detected through routine entry screening and active monitoring at international airports. This article shares Taiwan's disease surveillance activities at designated points of entry and travel and border health measures in response to Zika. The Taiwan government collaborates with its tourism industry to disseminate information about precautionary measures and encourages tour guides to report suspected individuals or events to activate early response measures. Taiwan also engages in vector control activities at points of entry, including targeting aircraft from countries where vector-borne diseases are endemic, implementing mosquito sweep measures, and collecting vector surveillance data. In future emerging and reemerging disease events, entry surveillance at designated points of entry may enable early detection of diseases of international origin and more rapid activation of public health preparedness activities and international collaboration. Taiwan will continue to maximize border and travel health measures in compliance with IHR (2005) requirements, which rely on continued risk assessment, practical implementation activities, and engagement with all stakeholders.

Clinical implementation of stereotaxic brain implant optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenow, U.F.; Wojcicka, J.B.

1991-03-01

This optimization method for stereotaxic brain implants is based on seed/strand configurations of the basic type developed for the National Cancer Institute (NCI) atlas of regular brain implants. Irregular target volume shapes are determined from delineation in a stack of contrast enhanced computed tomography scans. The neurosurgeon may then select up to ten directions, or entry points, of surgical approach of which the program finds the optimal one under the criterion of smallest target volume diameter. Target volume cross sections are then reconstructed in 5-mm-spaced planes perpendicular to the implantation direction defined by the entry point and the target volumemore » center. This information is used to define a closed line in an implant cross section along which peripheral seed strands are positioned and which has now an irregular shape. Optimization points are defined opposite peripheral seeds on the target volume surface to which the treatment dose rate is prescribed. Three different optimization algorithms are available: linear least-squares programming, quadratic programming with constraints, and a simplex method. The optimization routine is implemented into a commercial treatment planning system. It generates coordinate and source strength information of the optimized seed configurations for further dose rate distribution calculation with the treatment planning system, and also the coordinate settings for the stereotaxic Brown-Roberts-Wells (BRW) implantation device.« less

Guidance, Navigation, and Control Techniques and Technologies for Active Satellite Removal

NASA Astrophysics Data System (ADS)

Ortega Hernando, Guillermo; Erb, Sven; Cropp, Alexander; Voirin, Thomas; Dubois-Matra, Olivier; Rinalducci, Antonio; Visentin, Gianfranco; Innocenti, Luisa; Raposo, Ana

2013-09-01

This paper shows an internal feasibility analysis to de- orbit a non-functional satellite of big dimensions by the Technical Directorate of the European Space Agency ESA. The paper focuses specifically on the design of the techniques and technologies for the Guidance, Navigation, and Control (GNC) system of the spacecraft mission that will capture the satellite and ultimately will de-orbit it on a controlled re-entry.The paper explains the guidance strategies to launch, rendezvous, close-approach, and capture the target satellite. The guidance strategy uses chaser manoeuvres, hold points, and collision avoidance trajectories to ensure a safe capture. It also details the guidance profile to de-orbit it in a controlled re-entry.The paper continues with an analysis of the required sensing suite and the navigation algorithms to allow the homing, fly-around, and capture of the target satellite. The emphasis is placed around the design of a system to allow the rendezvous with an un-cooperative target, including the autonomous acquisition of both the orbital elements and the attitude of the target satellite.Analysing the capture phase, the paper provides a trade- off between two selected capture systems: the net and the tentacles. Both are studied from the point of view of the GNC system.The paper analyses as well the advanced algorithms proposed to control the final compound after the capture that will allow the controlled de-orbiting of the assembly in a safe place in the Earth.The paper ends proposing the continuation of this work with the extension to the analysis of the destruction process of the compound in consecutive segments starting from the entry gate to the rupture and break up.

Implementing a Facial Recognition System to Improve Accessibility and Increase Utilization of Entry Control Points at Military Installations

DTIC Science & Technology

2011-06-01

event simulation is used to model three alternatives to the ECP system. The baseline system which contains two manned kiosks, a fully automated system...experience is traffic delays in the morning for government employees accessing the bases. If one or two lanes were dedicated to 3 completely or even semi...purpose of clarity, the figure below displays only the two lowest levels of functions. This final functional decomposition identifies the sub functions

15 CFR Supplement No. 1 to Part 716 - Notification, Duration and Frequency of Inspections

Code of Federal Regulations, 2010 CFR

2010-01-01

... prior to arrival of Inspection Team at the point of entry (initial); 24 hours prior to arrival of Inspection Team at the point of entry (routine) 48 hours prior to arrival of Inspection Team at the plant site 120 hours prior to arrival of Inspection Team at the plant site 120 hours prior to arrival of...

15 CFR Supplement No. 1 to Part 716 - Notification, Duration and Frequency of Inspections

Code of Federal Regulations, 2011 CFR

2011-01-01

... prior to arrival of Inspection Team at the point of entry (initial); 24 hours prior to arrival of Inspection Team at the point of entry (routine) 48 hours prior to arrival of Inspection Team at the plant site 120 hours prior to arrival of Inspection Team at the plant site 120 hours prior to arrival of...

15 CFR Supplement No. 1 to Part 716 - Notification, Duration and Frequency of Inspections

Code of Federal Regulations, 2013 CFR

2013-01-01

... prior to arrival of Inspection Team at the point of entry (initial); 24 hours prior to arrival of Inspection Team at the point of entry (routine) 48 hours prior to arrival of Inspection Team at the plant site 120 hours prior to arrival of Inspection Team at the plant site 120 hours prior to arrival of...

A Well-Clear Volume Based on Time to Entry Point

NASA Technical Reports Server (NTRS)

Narkawicz, Anthony J.; Munoz, Cesar A.; Upchurch, Jason M.; Chamberlain, James P.; Consiglio, Maria C.

2014-01-01

A well-clear volume is a key component of NASA's Separation Assurance concept for the integration of UAS in the NAS. This paper proposes a mathematical definition of the well-clear volume that uses, in addition to distance thresholds, a time threshold based on time to entry point (TEP). The mathematical model that results from this definition is more conservative than other candidate definitions of the wellclear volume that are based on range over closure rate and time to closest point of approach.

A Comparison of Two Skip Entry Guidance Algorithms

NASA Technical Reports Server (NTRS)

Rea, Jeremy R.; Putnam, Zachary R.

2007-01-01

The Orion capsule vehicle will have a Lift-to-Drag ratio (L/D) of 0.3-0.35. For an Apollo-like direct entry into the Earth's atmosphere from a lunar return trajectory, this L/D will give the vehicle a maximum range of about 2500 nm and a maximum crossrange of 216 nm. In order to y longer ranges, the vehicle lift must be used to loft the trajectory such that the aerodynamic forces are decreased. A Skip-Trajectory results if the vehicle leaves the sensible atmosphere and a second entry occurs downrange of the atmospheric exit point. The Orion capsule is required to have landing site access (either on land or in water) inside the Continental United States (CONUS) for lunar returns anytime during the lunar month. This requirement means the vehicle must be capable of flying ranges of at least 5500 nm. For the L/D of the vehicle, this is only possible with the use of a guided Skip-Trajectory. A skip entry guidance algorithm is necessary to achieve this requirement. Two skip entry guidance algorithms have been developed: the Numerical Skip Entry Guidance (NSEG) algorithm was developed at NASA/JSC and PredGuid was developed at Draper Laboratory. A comparison of these two algorithms will be presented in this paper. Each algorithm has been implemented in a high-fidelity, 6 degree-of-freedom simulation called the Advanced NASA Technology Architecture for Exploration Studies (ANTARES). NASA and Draper engineers have completed several monte carlo analyses in order to compare the performance of each algorithm in various stress states. Each algorithm has been tested for entry-to-target ranges to include direct entries and skip entries of varying length. Dispersions have been included on the initial entry interface state, vehicle mass properties, vehicle aerodynamics, atmosphere, and Reaction Control System (RCS). Performance criteria include miss distance to the target, RCS fuel usage, maximum g-loads and heat rates for the first and second entry, total heat load, and control system saturation. The comparison of the performance criteria has led to a down select and guidance merger that will take the best ideas from each algorithm to create one skip entry guidance algorithm for the Orion vehicle.

22 CFR 211.7 - Arrangements for entry and handling in foreign country.

Code of Federal Regulations, 2011 CFR

2011-04-01

... country to a designated inland point of entry in the recipient country shall be arranged by the... country. 211.7 Section 211.7 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT TRANSFER OF FOOD... for entry and handling in foreign country. (a) Costs at discharge ports. Except as otherwise agreed...

MSL EDL Entry Guidance using the Entry Terminal Point Controller

NASA Technical Reports Server (NTRS)

2006-01-01

The Mars Science Laboratory will be the first Mars mission to attempt a guided entry with the objective of safely delivering the entry vehicle to a survivable parachute deploy state within 10 km of the pre-designated landing site. The Entry Terminal Point Controller guidance algorithm is derived from the final phase Apollo Command Module guidance and, like Apollo, modulates the bank angle to control range based on deviations in range, altitude rate, and drag acceleration from a reference trajectory. For application to Mars landers which must make use of the tenuous Martian atmosphere, it is critical to balance the lift of the vehicle to minimize the range while still ensuring a safe deploy altitude. An overview of the process to generate optimized guidance settings is presented, discussing improvements made over the last four years. Performance tradeoffs between ellipse size and deploy altitude will be presented, along with imposed constraints of entry acceleration and heating. Performance sensitivities to the bank reversal deadbands, heading alignment, attitude initialization error, and atmospheric delivery errors are presented. Guidance settings for contingency operations, such as those appropriate for severe dust storm scenarios, are evaluated.

Space shuttle entry and landing navigation analysis

NASA Technical Reports Server (NTRS)

Jones, H. L.; Crawford, B. S.

1974-01-01

A navigation system for the entry phase of a Space Shuttle mission which is an aided-inertial system which uses a Kalman filter to mix IMU data with data derived from external navigation aids is evaluated. A drag pseudo-measurement used during radio blackout is treated as an additional external aid. A comprehensive truth model with 101 states is formulated and used to generate detailed error budgets at several significant time points -- end-of-blackout, start of final approach, over runway threshold, and touchdown. Sensitivity curves illustrating the effect of variations in the size of individual error sources on navigation accuracy are presented. The sensitivity of the navigation system performance to filter modifications is analyzed. The projected overall performance is shown in the form of time histories of position and velocity error components. The detailed results are summarized and interpreted, and suggestions are made concerning possible software improvements.

Survivors of self-inflicted gunshot wounds to the head: characterization of ocular injuries and health care costs.

PubMed

Reddy, Amit K; Baker, Meredith S; Sobel, Rachel K; Whelan, David A; Carter, Keith D; Allen, Richard C

2014-06-01

Suicides and attempted suicides are major public health issues in the United States and around the world. Self-inflicted gunshot wounds (SIGSWs) are a common method of attempting suicide, the head being the most commonly injured body region; however, the literature lacks an overview of the orbital and ocular injuries as well as outcomes associated with SIGSWs. To characterize the ocular and orbital injuries and outcomes of patients presenting with SIGSWs and to examine the cost associated with these injuries. Retrospective medical record review was performed of all patients who presented to the University of Iowa Hospitals and Clinics between 2003 to 2013 with the admitting diagnosis of self-inflicted injuries via firearms. Patients with no periorbital or ocular injuries and/or those who did not survive for at least 2 months following the incident were excluded. Ocular injuries and outcomes and health care costs and reimbursements, which were generated by a financial report obtained from the hospital finance department that included data from both the hospital billing and cost accounting systems. All patients in this study (n = 18) were men with a mean age of 47.2 years. Eight patients (44.4%) displayed submental missile entry points, 7 (38.9%) displayed intraoral entry points, and 3 (16.7%) displayed pericranial entry points. Patients with pericranial entries sustained more severe ocular injuries and had poorer ocular outcomes. Seven patients (38.9%) were found at final follow-up to have visual acuity of 20/40 or better in each eye and all showed missile trajectories in the sagittal plane. The mean cost of treatment of these patients totaled $117,338 while the mean reimbursement amount was $124,388. Data regarding ocular injuries and outcomes may assist ophthalmologists in the treatment of patients with SIGSWs in the future. Many patients had extremely functional vision at final follow-ups, which highlights the importance of specialists conducting examinations and reconstructive procedures promptly, carefully, and thoroughly. Cost and reimbursement data suggest that while these cases place a large financial burden on society, they may not burden hospital systems in the same way.

ENTRY PORTION OF SOUTH SIDE, VIEW FACING NORTHNORTHWEST. Naval ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ENTRY PORTION OF SOUTH SIDE, VIEW FACING NORTH-NORTHWEST. - Naval Air Station Barbers Point, Aircraft Storehouse, Between Midway & Card Streets at Enterprise Avenue intersection, Ewa, Honolulu County, HI

Thermal and aerothermal performance of a titanium multiwall thermal protection system

NASA Technical Reports Server (NTRS)

Avery, D. E.; Shideler, J. L.; Stuckey, R. N.

1981-01-01

A metallic thermal protection system (TPS) concept the multiwall designed for temperature and pressure at Shuttle body point 3140 where the maximum surface temperature is approximately 811 K was tested to evaluate thermal performance and structural integrity. A two tile model of titanium multiwall and a model consisting of a low temperature reusable surface insulation (LRSI) tiles were exposed to 25 simulated thermal and pressure Shuttle entry missions. The two systems performed the same, and neither system deteriorated during the tests. It is indicated that redesign of the multiwall tiles reduces tile thickness and/or weight. A nine tile model of titanium multiwal was tested for radiant heating and aerothermodynamics. Minor design changes that improve structural integrity without having a significant impact on the thermal protection ability of the titanium multiwall TPS are identified. The capability of a titanium multiwall thermal protection system to protect an aluminum surface during a Shuttle type entry trajectory at locations on the vehicle where the maximum surface temperature is below 811 K is demonstrated.

Thermal Protection of the Huygens Probe During Titan Entry: Last Questions

NASA Technical Reports Server (NTRS)

Bouilly, Jean-Marc

2005-01-01

CASSINI-HUYGENS mission is a cooperation between NASA and ESA, dedicated to the exploration of the Saturnian system. In the framework of this mission, the entry of the HUYGENS probe in the atmosphere of TITAN will be of major scientific interest. One of the essential points of the HUYGENS mission is therefore the good behavior of the thermal shield designed to maintain the aerodynamic shape and to protect the probe from excessive heating during the atmospheric entry on TITAN. The design and the qualification of this thermal shield were carried out between 1992 and 1995 (development phase). Currently, the final definition of mission parameters is being completed. As the performance of the thermal shield is one of all the parameters considered at system level, it is therefore necessary to reassess the thermal response of the TPS, taking into account some updated information that was not yet available during the development phase. After some recall of the results of 1992 to 1995, the paper will present a status of the current work on TPS.

Ideal tibial intramedullary nail insertion point varies with tibial rotation.

PubMed

Walker, Richard M; Zdero, Rad; McKee, Michael D; Waddell, James P; Schemitsch, Emil H

2011-12-01

The aim of the study was to investigate how superior entry point varies with tibial rotation and to identify landmarks that can be used to identify suitable radiographs for successful intramedullary nail insertion. The proximal tibia and knee were imaged for 12 cadaveric limbs undergoing 5° increments of internal and external rotation. Medial and lateral arthrotomies were performed, the ideal superior entry point was identified, and a 2-mm Kirschner wire inserted. A second Kirschner wire was sequentially placed at the 5-mm and then the 10-mm position, both medial and lateral to the initial Kirschner wire. Radiographs of the knee were obtained for all increments. The changing position of the ideal nail insertion point was recorded. A 30° arc (range, 25°-40°) provided a suitable anteroposterior radiograph. On the neutral anteroposterior radiograph, the Kirschner wire was 54% ± 1.5% (range, 51-56%) from the medial edge of the tibial plateau. For every 5° of rotation, the Kirschner wire moved 3% of the plateau width. During external rotation, a misleading medial entry point was obtained. A fibular bisector line correlated with an entry point that was ideal or up to 5 mm lateral to this but never medial. The film that best showed the fibular bisector line was between 0° and 10° of internal rotation of the tibia. The fibula head bisector line can be used to avoid choosing external rotation views and, thus, avoid medial insertion points. The current results may help the surgeon prevent malalignment during intramedullary nailing in proximal tibial fractures.

Arsenic and Antimony Removal from Drinking Water by Point-of-Entry Reverse Osmosis Coupled with Dual Plumbing Distribution - U.S. EPA Demonstration Project at Carmel Elementary School in Carmel, ME -Final Performance Evaluation Report

EPA Science Inventory

This report documents the activities performed for and the results obtained from the arsenic and antimony removal treatment technology demonstration project at the Carmel Elementary School (CES) in Carmel, ME. An innovative approach of employing point of entry (POE) reverse osmo...

40 CFR 141.26 - Monitoring frequency and compliance requirements for radionuclides in community water systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... beta emitters and iodine-131 and annual samples for tritium and strontium-90 at each entry point to the... recommended. (ii) For iodine-131, a composite of five consecutive daily samples shall be analyzed once each quarter. As ordered by the State, more frequent monitoring shall be conducted when iodine-131 is...

40 CFR 141.26 - Monitoring frequency and compliance requirements for radionuclides in community water systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... beta emitters and iodine-131 and annual samples for tritium and strontium-90 at each entry point to the... recommended. (ii) For iodine-131, a composite of five consecutive daily samples shall be analyzed once each quarter. As ordered by the State, more frequent monitoring shall be conducted when iodine-131 is...

40 CFR 141.26 - Monitoring frequency and compliance requirements for radionuclides in community water systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... beta emitters and iodine-131 and annual samples for tritium and strontium-90 at each entry point to the... recommended. (ii) For iodine-131, a composite of five consecutive daily samples shall be analyzed once each quarter. As ordered by the State, more frequent monitoring shall be conducted when iodine-131 is...

Center for Ground Vehicle Development and Integration

DTIC Science & Technology

2011-04-22

UNCLASSIFIED OPSEC# 21798 CGVDI Organizational Chart CGVDI Director Project and Operations Management Project Management Operations Management Engineered...Metals Welding Assembly / Paint UNCLASSIFIED UNCLASSIFIED OPSEC# 21798 Project and Operations Management CGVDI serves as a single entry point to RDECOM...for ground vehicle system integration projects, as well as for managing cost, schedule, performance and risk. Project Management Operations

78 FR 76533 - New Mailing Standards for Domestic Mailing Services Products

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-18

... sequencing system (FSS), a mailer association suggested to change the required minimum for an FSS scheme... must make FSS scheme or FSS facility pallets when the quantity reaches 250 pounds, so that minimum is... Standard Mail, FSS scheme pallets may be entered at origin, or at DNDC, DSCF, or DFSS entry points, but the...

Observations of Shock Diffusion and Interactions in Supersonic Freestreams with Counterflowing Jets

NASA Technical Reports Server (NTRS)

Daso, Endwell O.; Pritchett, Victor E.; Wang, Ten-See; Blankson, Isiah M.; Auslender, Aaron H.

2006-01-01

One of the technical challenges in long-duration space exploration and interplanetary missions is controlled entry and re-entry into planetary and Earth atmospheres, which requires the dissipation of considerable kinetic energy as the spacecraft decelerates and penetrates the atmosphere. Efficient heat load management of stagnation points and acreage heating remains a technological challenge and poses significant risk, particularly for human missions. An innovative approach using active flow control concept is proposed to significantly modify the external flow field about the spacecraft in planetary atmospheric entry and re-entry in order to mitigate the harsh aerothermal environments, and significantly weaken and disperse the shock-wave system to reduce aerothermal loads and wave drag, as well as improving aerodynamic performance. To explore the potential benefits of this approach, we conducted fundamental experiments in a trisonic blow down wind tunnel to investigate the effects of counterflowing sonic and supersonic jets against supersonic freestreams to gain a better understanding of the flow physics of the interactions of the opposing flows and the resulting shock structure.

INTERIOR OF SECOND FLOOR, OUTSIDE PROJECTION ROOM ABOVE ENTRY PORCH, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR OF SECOND FLOOR, OUTSIDE PROJECTION ROOM ABOVE ENTRY PORCH, VIEW FACING WEST. - Naval Air Station Barbers Point, Theater, Yorktown Avenue between Wasp & Saipan Streets, Ewa, Honolulu County, HI

Taiwan's Travel and Border Health Measures in Response to Zika

PubMed Central

Ho, Li-Li; Tsai, Yu-Hui; Lee, Wang-Ping; Liao, Szu-Tsai; Wu, Li-Gin

2017-01-01

Zika virus has recently emerged as a worldwide public health concern. Travel and border health measures stand as one of the main strategies and frontline defenses in responding to international epidemics. As of October 31, 2016, Taiwan has reported 13 imported cases, 5 of which were detected through routine entry screening and active monitoring at international airports. This article shares Taiwan's disease surveillance activities at designated points of entry and travel and border health measures in response to Zika. The Taiwan government collaborates with its tourism industry to disseminate information about precautionary measures and encourages tour guides to report suspected individuals or events to activate early response measures. Taiwan also engages in vector control activities at points of entry, including targeting aircraft from countries where vector-borne diseases are endemic, implementing mosquito sweep measures, and collecting vector surveillance data. In future emerging and reemerging disease events, entry surveillance at designated points of entry may enable early detection of diseases of international origin and more rapid activation of public health preparedness activities and international collaboration. Taiwan will continue to maximize border and travel health measures in compliance with IHR (2005) requirements, which rely on continued risk assessment, practical implementation activities, and engagement with all stakeholders. PMID:28418744

INTERIOR FROM NORTH ENTRY VESTIBULE INTO MAIN EQUIPMENT ROOM, VIEW ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR FROM NORTH ENTRY VESTIBULE INTO MAIN EQUIPMENT ROOM, VIEW FACING SOUTH. - Naval Air Station Barbers Point, Telephone Exchange, Coral Sea Road north of Bismarck Sea Road, Ewa, Honolulu County, HI

ENTRY PORTION OF SOUTH SIDE, VIEW FACING NORTHNORTHWEST (with scale ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ENTRY PORTION OF SOUTH SIDE, VIEW FACING NORTH-NORTHWEST (with scale stick). - Naval Air Station Barbers Point, Aircraft Storehouse, Between Midway & Card Streets at Enterprise Avenue intersection, Ewa, Honolulu County, HI

50 CFR 660.70 - Groundfish conservation areas.

Code of Federal Regulations, 2011 CFR

2011-10-01

... points for the RCAs. (1) Trawl (Limited Entry and Open Access Nongroundfish Trawl Gears) Rockfish....71 through 660.74. (2) Non-Trawl (Limited Entry Fixed Gear and Open Access Non-trawl Gears) Rockfish...

24 CFR 350.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Security) maintained in the Book-entry System, as set forth in Federal Reserve Bank Operating Circulars. (b...: Book-entry Ginnie Mae Security. A Ginnie Mae Security issued or maintained in the Book-entry System... Reserve Banks. Book-entry System. The automated book-entry system operated by the Federal Reserve Banks...

Regolith-Derived Heat Shield for Planetary Body Entry and Descent System with In Situ Fabrication

NASA Technical Reports Server (NTRS)

Hogue, Michael D.; Mueller, Robert P.; Rasky, Daniel J.; Hintze, Paul E.; Sibille, Laurent

2011-01-01

In this paper we will discuss a new mass-efficient and innovative way of protecting high-mass spacecraft during planetary Entry, Descent & Landing (EDL). Heat shields fabricated in situ can provide a thermal-protection system (TPS) for spacecraft that routinely enter a planetary atmosphere. By fabricating the heat shield with space resources from regolith materials available on moons and asteroids, it is possible to avoid launching the heat-shield mass from Earth. Three regolith processing and manufacturing methods will be discussed: 1) oxygen & metal extraction ISRU processes produce glassy melts enriched in alumina and titania, processed to obtain variable density, high melting point and heat-resistance; 2) compression and sintering of the regolith yield low density materials; 3) in-situ derived high-temperature polymers are created to bind regolith particles together, with a lower energy budget.

Handling Qualities of a Capsule Spacecraft During Atmospheric Entry

NASA Technical Reports Server (NTRS)

Bilimoria, Karl D.; Mueller, Eric R.

2010-01-01

A piloted simulation was conducted to study handling qualities for capsule spacecraft entering the Earth s atmosphere. Eight evaluation pilots, including six pilot astronauts, provided Cooper-Harper ratings, workload ratings, and qualitative comments. The simulation began after descending through the atmospheric entry interface point and continued until the drogue parachutes deployed. There were two categories of piloting tasks, both of which required bank angle control. In one task category, the pilot followed a closed-loop bank angle command computed by the backup guidance system to manage g-loads during entry. In the other task category, the pilot used intuitive rules to determine the desired bank angle independently, based on an open-loop schedule of vertical speed, Mach, and total energy specified at several range-to-target gates along the entry trajectory. Pilots were able to accurately track the bank angle guidance commands and steered the capsule toward the recovery site with essentially the same range error as the benchmark autopilot trajectory albeit with substantially higher propellant usage, and the handling qualities for this task were satisfactory. Another key result was that the complex piloting task of atmospheric entry could be performed satisfactorily, even in the presence of large dispersions, by controlling bank angle to follow a simple open-loop schedule.

Aerothermodynamic environments for Mars entry, Mars return, and lunar return aerobraking missions

NASA Astrophysics Data System (ADS)

Rochelle, W. C.; Bouslog, S. A.; Ting, P. C.; Curry, D. M.

1990-06-01

The aeroheating environments to vehicles undergoing Mars aerocapture, earth aerocapture from Mars, and earth aerocapture from the moon are presented. An engineering approach for the analysis of various types of vehicles and trajectories was taken, rather than performing a benchmark computation for a specific point at a selected time point in a trajectory. The radiation into Mars using the Mars Rover Sample Return (MRSR) 2-ft nose radius bionic remains a small contributor of heating for 6 to 10 km/sec; however, at 12 km/sec it becomes comparable with the convection. For earth aerocapture, returning from Mars, peak radiation for the MRSR SRC is only 25 percent of the peak convection for the 12-km/sec trajectory. However, when large vehicles are considered with this trajectory, peak radiation can become 2 to 4 times higher than the peak convection. For both Mars entry and return, a partially ablative Thermal Protection System (TPS) would be required, but for Lunar Transfer Vehicle return an all-reusable TPS can be used.

Reducing duplicate testing: a comparison of two clinical decision support tools.

PubMed

Procop, Gary W; Keating, Catherine; Stagno, Paul; Kottke-Marchant, Kandice; Partin, Mary; Tuttle, Robert; Wyllie, Robert

2015-05-01

Unnecessary duplicate laboratory testing is common and costly. Systems-based means to avert unnecessary testing should be investigated and employed. We compared the effectiveness and cost savings associated with two clinical decision support tools to stop duplicate testing. The Hard Stop required telephone contact with the laboratory and justification to have the duplicate test performed, whereas the Smart Alert allowed the provider to bypass the alert at the point of order entry without justification. The Hard Stop alert was significantly more effective than the Smart Alert (92.3% vs 42.6%, respectively; P < .0001). The cost savings realized per alert activation was $16.08/alert for the Hard Stop alert vs $3.52/alert for the Smart Alert. Structural and process changes that require laboratory contact and justification for duplicate testing are more effective than interventions that allow providers to bypass alerts without justification at point of computerized physician order entry. Copyright© by the American Society for Clinical Pathology.

Data Sources for Estimating Environment-Related Diseases

PubMed Central

Walker, Bailus

1984-01-01

Relating current morbidity and mortality to environmental and occupational factors requires information on parameters of environmental exposure for practitioners of medicine and other health scientists. A fundamental source of that information is the exposure history recorded in hospitals, clinics, and other points of entry to the health care system. The qualitative and quantitative aspects of this issue are reviewed. PMID:6716500

NORTHEAST FACADE AND ONESTORY WING FROM ENTRY DRIVE, VIEW FACING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

NORTHEAST FACADE AND ONE-STORY WING FROM ENTRY DRIVE, VIEW FACING SOUTHWEST. - Naval Air Station Barbers Point, Control Tower & Aviation Operations Building, Near intersection of runways between Hangar 110 & Building 115, Ewa, Honolulu County, HI

INTERIOR OF NORTH ENTRY VESTIBULE, SHOWING TRANSFORMER ROOM BEHIND WIRE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR OF NORTH ENTRY VESTIBULE, SHOWING TRANSFORMER ROOM BEHIND WIRE MESH, VIEW FACING EAST-SOUTHEAST. - Naval Air Station Barbers Point, Telephone Exchange, Coral Sea Road north of Bismarck Sea Road, Ewa, Honolulu County, HI

DETAIL OF ENTRY HALL AND STAIR ON SOUTH SIDE, VIEW ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF ENTRY HALL AND STAIR ON SOUTH SIDE, VIEW FACING NORTH (with scale stick). - Naval Air Station Barbers Point, Telephone Exchange, Coral Sea Road north of Bismarck Sea Road, Ewa, Honolulu County, HI

Port of Davisville utilization study : phase II.

DOT National Transportation Integrated Search

2011-02-01

This project investigated the feasibility of expanding the Port of Davisville (Quonset Point, RI) to serve : as a port of entry and departure for international container shipments. As an international port of entry : (departure), the Port of Davisvil...

Tracking reflective practice-based learning by medical students during an ambulatory clerkship.

PubMed

Thomas, Patricia A; Goldberg, Harry

2007-11-01

To explore the use of web and palm digital assistant (PDA)-based patient logs to facilitate reflective learning in an ambulatory medicine clerkship. Thematic analysis of convenience sample of three successive rotations of medical students' patient log entries. Johns Hopkins University School of Medicine. MS3 and MS4 students rotating through a required block ambulatory medicine clerkship. Students are required to enter patient encounters into a web-based log system during the clerkship. Patient-linked entries included an open text field entitled, "Learning Need." Students were encouraged to use this field to enter goals for future study or teaching points related to the encounter. The logs of 59 students were examined. These students entered 3,051 patient encounters, and 51 students entered 1,347 learning need entries (44.1% of encounters). The use of the "Learning Need" field was not correlated with MS year, gender or end-of-clerkship knowledge test performance. There were strong correlations between the use of diagnostic thinking comments and observations of therapeutic relationships (Pearson's r=.42, p<0.001), and between diagnostic thinking and primary interpretation skills (Pearson's r=.60, p<0.001), but not between diagnostic thinking and factual knowledge (Pearson's r =.10, p=.46). We found that when clerkship students were cued to reflect on each patient encounter with the electronic log system, student entries grouped into categories that suggested different levels of reflective thinking. Future efforts should explore the use of such entries to encourage and track habits of reflective practice in the clinical curriculum.

31 CFR 357.0 - Book-entry systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... General Information § 357.0 Book-entry systems. (a) Treasury securities. Treasury securities are...-entry system is the book-entry system in which Treasury securities are held in a tiered system through securities intermediaries such as financial institutions or brokerage firms. A Treasury security is...

31 CFR 357.0 - Book-entry systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... General Information § 357.0 Book-entry systems. (a) Treasury securities. Treasury securities are...-entry system is the book-entry system in which Treasury securities are held in a tiered system through securities intermediaries such as financial institutions or brokerage firms. A Treasury security is...

31 CFR 357.0 - Book-entry systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... General Information § 357.0 Book-entry systems. (a) Treasury securities. Treasury securities are...-entry system is the book-entry system in which Treasury securities are held in a tiered system through securities intermediaries such as financial institutions or brokerage firms. A Treasury security is...

31 CFR 357.0 - Book-entry systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... General Information § 357.0 Book-entry systems. (a) Treasury securities. Treasury securities are...-entry system is the book-entry system in which Treasury securities are held in a tiered system through securities intermediaries such as financial institutions or brokerage firms. A Treasury security is...

Accuracy study of computer-assisted drilling: the effect of bone density, drill bit characteristics, and use of a mechanical guide.

PubMed

Hüfner, T; Geerling, J; Oldag, G; Richter, M; Kfuri, M; Pohlemann, T; Krettek, C

2005-01-01

This study was designed to determine the clinical relevant accuracy of CT-based navigation for drilling. Experimental model. Laboratory. Twelve drills of varying lengths and diameters were tested with 2 different set-ups. Group 1 used free-hand navigated drilling technique with foam blocks equipped with titanium target points. Group 2 (control) used a newly developed 3-dimensional measurement device equipped with titanium target points with a fixed entry for the navigated drill to minimize bending forces. One examiner performed 690 navigated drillings using solely the monitor screen for control in both groups. The difference between the planned and the actual starting and target point (up to 150 mm distance) was measured (mm). Levene test and a nonpaired t test. Significance level was set as P < 0.05. The core accuracy of the navigation system measured with the 3-dimensional device was 0.5 mm. The mean distance from planned to actual entry points in group 1 was 1.3 (range, 0.6-3.4 mm). The mean distance between planned and actual target point was 3.4 (range, 1.7-5.8 mm). Free-hand navigated drilling showed an increased difference with increased length of the drill bits as well as with increased drilling channel for drill bits 2.5 and 3.2 mm and not for 3.5 and 4.5 mm (P < 0.05). The core accuracy of the navigation system is high. Compared with the navigated free-hand technique, the results suggest that drill bit deflection interferes directly with the precision. The precision is decreased when using small diameter and longer drill bits.

Need for and Access to Supportive Services in the Child Welfare System

PubMed Central

Freisthler, Bridget

2011-01-01

Objective The purpose of this paper is to examine how geographical availability of social services is related to foster care entry rates and referrals for child maltreatment investigations. The primary concerns are to (1) determine locations across Los Angeles County where the availability of social services is low but display a high need for those services and (2) begin to examine how the geographic distribution of social services is related to rates of referrals and foster care entries in child maltreatment. Methods Archival data for all 288 zip codes within Los Angeles County were collected on rates of referrals, foster care entries, location and types of social service agencies, and zip code demographics. Data were analyzed using point process models and spatial regressions. Results Higher densities of child welfare services in local areas (for referrals) and lagged areas (for referrals and foster care entries) were related to lower rates of child maltreatment. The density of housing and housing-related services was negatively related to referrals in local areas and foster care entry rates in lagged areas. Areas with higher densities of substance abuse and domestic violence service agencies had significantly higher rates of both Child Protective Services (CPS) referrals and entries into foster care in local areas. Conclusions While the total density of child welfare services within and surrounding zip code areas is related to lower rates of referrals and foster care entries, the findings are less clear about what those specific services are. Living in and around “resource rich” zip codes may reduce rates of child maltreatment. PMID:23788827

Piloted Simulator Tests of a Guidance System which Can Continously Predict Landing Point of a Low L/D Vehicle During Atmosphere Re-Entry

NASA Technical Reports Server (NTRS)

Wingrove, Rodney C.; Coate, Robert E.

1961-01-01

The guidance system for maneuvering vehicles within a planetary atmosphere which was studied uses the concept of fast continuous prediction of the maximum maneuver capability from existing conditions rather than a stored-trajectory technique. used, desired touchdown points are compared with the maximum range capability and heating or acceleration limits, so that a proper decision and choice of control inputs can be made by the pilot. In the method of display and control a piloted fixed simulator was used t o demonstrate the feasibility od the concept and to study its application to control of lunar mission reentries and recoveries from aborts.

Entry-Level Doctorate for Occupational Therapists: An Assessment of Attitudes of Occupational Therapists and Occupational Therapy Assistants

ERIC Educational Resources Information Center

McCombie, Randy P.

2016-01-01

Purpose: The purpose of this study was to survey occupational therapists (OTs) and occupational therapy assistants (OTAs) on their attitudes toward a possible move to the entry-level doctorate as the mandated singular point of entry into the profession for OTs. Method: The study surveyed a random sample of 600 OTs and 600 OTAs from two…

Radiative Heat Transfer During Atmosphere Entry at Parabolic Velocity

NASA Technical Reports Server (NTRS)

Yoshikawa, Kenneth K.; Wick, Bradford H.

1961-01-01

Stagnation point radiative heating rates for manned vehicles entering the earth's atmosphere at parabolic velocity are presented and compared with corresponding laminar convective heating rates. The calculations were made for both nonlifting and lifting entry trajectories for vehicles of varying nose radius, weight-to-area ratio, and drag. It is concluded from the results presented that radiative heating will be important for the entry conditions considered.

31 CFR 306.23 - Securities eligible to be held in the Legacy Treasury Direct® Book-entry Securities System.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Legacy Treasury Direct® Book-entry Securities System. 306.23 Section 306.23 Money and Finance: Treasury... Securities eligible to be held in the Legacy Treasury Direct® Book-entry Securities System. (a) Eligible... book-entry securities system. (b) Conversion of Registered Security to book-entry form to be held in...

FACILITY 363, INTERIOR. KITCHEN AS SEEN FROM LIVING ROOM ENTRY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FACILITY 363, INTERIOR. KITCHEN AS SEEN FROM LIVING ROOM ENTRY . VIEW FACING SOUTH. - U.S. Naval Base, Pearl Harbor, Naval Housing Area Hospital Point, Pharmacist's Quarters Type, 13-16 First Street, Pearl City, Honolulu County, HI

Patient-centered primary health care: synergy potential for health systems strengthening.

PubMed

Stender, S C; Christensen, A

2013-10-01

The ultimate goal of government health systems is to provide highly effective equitable services that save lives and reduce morbidity and mortality. The pressure to conform to duplicative global and donor initiatives compounds existing challenges to health systems strengthening such as shortages of human resources for health, weak supply chains, inadequate laboratory services and parallel data management systems. This article illustrates how primary health care, as the point of entry into the health care system for the majority of individuals in sub-Saharan Africa, should be strengthened to ensure that individuals and their communities receive essential, holistic care.

Multi-viewpoint clustering analysis

NASA Technical Reports Server (NTRS)

Mehrotra, Mala; Wild, Chris

1993-01-01

In this paper, we address the feasibility of partitioning rule-based systems into a number of meaningful units to enhance the comprehensibility, maintainability and reliability of expert systems software. Preliminary results have shown that no single structuring principle or abstraction hierarchy is sufficient to understand complex knowledge bases. We therefore propose the Multi View Point - Clustering Analysis (MVP-CA) methodology to provide multiple views of the same expert system. We present the results of using this approach to partition a deployed knowledge-based system that navigates the Space Shuttle's entry. We also discuss the impact of this approach on verification and validation of knowledge-based systems.

From laboratory to point of entry: development and implementation of a loop-mediated isothermal amplification (LAMP)-based genetic identification system to prevent introduction of quarantine insect species.

PubMed

Blaser, Simon; Diem, Hanspeter; von Felten, Andreas; Gueuning, Morgan; Andreou, Michael; Boonham, Neil; Tomlinson, Jennifer; Müller, Pie; Utzinger, Jürg; Frey, Jürg E; Bühlmann, Andreas

2018-06-01

Rapid genetic on-site identification methods at points of entry, such as seaports and airports, have the potential to become important tools to prevent the introduction and spread of economically harmful pest species that are unintentionally transported by the global trade of plant commodities. This paper reports the development and evaluation of a loop-mediated isothermal amplification (LAMP)-based identification system to prevent introduction of the three most frequently encountered regulated quarantine insect species groups at Swiss borders, Bemisia tabaci, Thrips palmi and several regulated fruit flies of the genera Bactrocera and Zeugodacus. The LAMP primers were designed to target a fragment of the mitochondrial cytochrome c oxidase subunit I gene and were generated based on publicly available DNA sequences. Laboratory evaluations analysing 282 insect specimens suspected to be quarantine organisms revealed an overall test efficiency of 99%. Additional on-site evaluation at a point of entry using 37 specimens performed by plant health inspectors with minimal laboratory training resulted in an overall test efficiency of 95%. During both evaluation rounds, there were no false-positives and the observed false-negatives were attributable to human-induced manipulation errors. To overcome the possibility of accidental introduction of pests as a result of rare false-negative results, samples yielding negative results in the LAMP method were also subjected to DNA barcoding. Our LAMP assays reliably differentiated between the tested regulated and non-regulated insect species within <1 h. Hence, LAMP assays represent suitable tools for rapid on-site identification of harmful pests, which might facilitate an accelerated import control process for plant commodities. © 2018 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. © 2018 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Backshell Radiative Heating on Human-Scale Mars Entry Vehicles

NASA Technical Reports Server (NTRS)

West,Thomas K., IV; Theisinger, John E.; Brune, Andrew J.; Johnston, Christopher O.

2017-01-01

This work quantifies the backshell radiative heating experienced by payloads on human- scale vehicles entering the Martian atmosphere. Three underlying configurations were studied: a generic sphere, a sphere-cone forebody with a cylindrical payload, and an ellipsled. Computational fluid dynamics simulations of the flow field and radiation were performed using the LAURA and HARA codes, respectively. Results of this work indicated the primary contributor to radiative heating is emission from the CO2 IR band system. Furthermore, the backshell radiation component of heating can persist lower than 2 km/s during entry and descent. For the sphere-cone configuration a peak heat flux of about 3.5 W/cm(exp. 2) was observed at the payload juncture during entry. At similar conditions, the ellipsled geometry experienced about 1.25 W/cm(exp. 2) on the backshell, but as much as 8 W/cm(exp. 2) on the base at very high angle of attack. Overall, this study sheds light on the potential magnitudes of backshell radiative heating that various configurations may experience. These results may serve as a starting point for thermal protection system design or configuration changes necessary to accommodate thermal radiation levels.

The 15 kW sub e (nominal) solar thermal electric power conversion concept definition study: Steam Rankine turbine system

NASA Technical Reports Server (NTRS)

Bland, T. J.

1979-01-01

A study to define the performance and cost characteristics of a solar powered, steam Rankine turbine system located at the focal point of a solar concentrator is presented. A two stage re-entry turbine with reheat between stages, which has an efficiency of 27% at a turbine inlet temperature of 732 C was used. System efficiency was defined as 60 Hertz electrical output divided by absorbed thermal input in the working fluid. Mass production costs were found to be approximately 364 dollars/KW.

50 CFR 660.381 - Limited entry trawl fishery management measures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conditions: vessels fishing with mid-water trawl gear on Pacific whiting trips during the primary whiting... Cave, Anacapa Island, Carrington Point, Judith Rock, Skunk Point, Footprint, Gull Island, South Point...

INTERIOR OF SOUTH ENTRY AIRLOCK SHOWING STEEL DOORS OPENING TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR OF SOUTH ENTRY AIRLOCK SHOWING STEEL DOORS OPENING TO OUTSIDE AND INTO MAIN EQUIPMENT ROOM, VIEW FACING SOUTHEAST. - Naval Air Station Barbers Point, Telephone Exchange, Coral Sea Road north of Bismarck Sea Road, Ewa, Honolulu County, HI

The Year of Transition in Review

DTIC Science & Technology

2007-01-01

quarter that 114 border forts have been constructed thus far, and 5 points of entry have been completed.315 SIGIR’s ground project surveys ...security services.366 Lt. Gen. Dempsey recently estimated that 20-25% of the National Police “needed to be weeded out.”367 Finally, recent surveys ...sector development Transportation and Communications system, 33 site surveys have been completed for the communication towers between Mosul and

Feasibility study of low angle planetary entry. [probe design for Jovian entry

NASA Technical Reports Server (NTRS)

Defrees, R. E.

1975-01-01

The feasibility of a Jovian entry by a probe originally designed for Saturn and Uranus entries is examined. An entry probe is described which is capable of release near an outer planet's sphere of influence and descent to a predetermined target entry point in the planet's atmosphere. The probe is designed so as to survive the trapped particle radiation belts and an entry heating pulse. Data is gathered and relayed to an overflying spacecraft bus during descent. Probe variations for two similar missions are described. In the first flyby of Jupiter by a Pioneer spacecraft launched during the 1979 opportunity is examined parametrically. In the second mission an orbiter based on Pioneer and launched in 1980 is defined in specific terms. The differences rest in the science payloads and directly affected wiring and electronics packages.

Characterization of the Solution Structure of Human Serum Albumin Loaded with a Metal Porphyrin and Fatty Acids

PubMed Central

Junk, Matthias J.N.; Spiess, Hans W.; Hinderberger, Dariush

2011-01-01

The structure of human serum albumin loaded with a metal porphyrin and fatty acids in solution is characterized by orientation-selective double electron-electron resonance (DEER) spectroscopy. Human serum albumin, spin-labeled fatty acids, and Cu(II) protoporphyrin IX—a hemin analog—form a fully self-assembled system that allows obtaining distances and mutual orientations between the paramagnetic guest molecules. We report a simplified analysis for the orientation-selective DEER data which can be applied when the orientation selection of one spin in the spin pair dominates the orientation selection of the other spin. The dipolar spectra reveal a dominant distance of 3.85 nm and a dominant orientation of the spin-spin vectors between Cu(II) protoporphyrin IX and 16-doxyl stearic acid, the electron paramagnetic resonance reporter group of the latter being located near the entry points to the fatty acid binding sites. This observation is in contrast to crystallographic data that suggest an asymmetric distribution of the entry points in the protein and hence the occurrence of various distances. In conjunction with the findings of a recent DEER study, the obtained data are indicative of a symmetric distribution of the binding site entries on the protein's surface. The overall anisotropic shape of the protein is reflected by one spin-spin vector orientation dominating the DEER data. PMID:21539799

Programming maternal and child overweight and obesity in the context of undernutrition: current evidence and key considerations for low- and middle-income countries.

PubMed

Jaacks, Lindsay M; Kavle, Justine; Perry, Abigail; Nyaku, Albertha

2017-05-01

The goals of the present targeted review on maternal and child overweight and obesity were to: (i) understand the current situation in low- and middle-income countries (LMIC) with regard to recent trends and context-specific risk factors; and (ii) building off this, identify entry points for leveraging existing undernutrition programmes to address overweight and obesity in LMIC. Trends reveal that overweight and obesity are a growing problem among women and children in LMIC; as in Ghana, Kenya, Niger, Sierra Leone, Tanzania and Zimbabwe, where the prevalence among urban women is approaching 50 %. Four promising entry points were identified: (i) the integration of overweight and obesity into national nutrition plans; (ii) food systems (integration of food and beverage marketing regulations into existing polices on the marketing of breast-milk substitutes and adoption of policies to promote healthy diets); (iii) education systems (integration of nutrition into school curricula with provision of high-quality foods through school feeding programmes); and (iv) health systems (counselling and social and behaviour change communication to improve maternal diet, appropriate gestational weight gain, and optimal infant and young child feeding practices). We conclude by presenting a step-by-step guide for programme officers and policy makers in LMIC with actionable objectives to address overweight and obesity.

Study of advanced atmospheric entry systems for Mars

NASA Technical Reports Server (NTRS)

1978-01-01

Entry system designs are described for various advanced Mars missions including sample return, hard lander, and Mars airplane. The Mars exploration systems for sample return and the hard lander require decleration from direct approach entry velocities of about 6 km/s to terminal velocities consistent with surface landing requirements. The Mars airplane entry system is decelerated from orbit at 4.6 km/s to deployment near the surface. Mass performance characteristics of major elements of the Mass performance characteristics are estimated for the major elements of the required entry systems using Viking technology or logical extensions of technology in order to provide a common basis of comparison for the three entry modes mission mode approaches. The entry systems, although not optimized, are based on Viking designs and reflect current hardware performance capability and realistic mass relationships.

Admission interview scores are associated with clinical performance in an undergraduate physiotherapy course: an observational study.

PubMed

Edgar, Susan; Mercer, Annette; Hamer, Peter

2014-12-01

The purpose of this study was to determine if there is an association between admission interview score and subsequent academic and clinical performance, in a four-year undergraduate physiotherapy course. Retrospective observational study. 141 physiotherapy students enrolled in two entry year groups. Individual student performance in all course units, practical examinations, clinical placements as well as year level and overall Grade Point Average. Predictor variables included admission interview scores, admission academic scores and demographic data (gender, age and entry level). Interview score demonstrated a significant association with performance in three of six clinical placements through the course. This association was stronger than for any other admission criterion although effect sizes were small to moderate. Further, it was the only admission score to have a significant association with overall Clinical Grade Point Average for the two year groups analysed (r=0.322). By contrast, academic scores on entry showed significant associations with all year level Grade Point Averages except Year 4, the clinical year. This is the first study to review the predictive validity of an admission interview for entry into a physiotherapy course in Australia. The results show that performance in this admission interview is associated with overall performance in clinical placements through the course, while academic admission scoring is not. These findings suggest that there is a role for both academic and non-academic selection processes for entry into physiotherapy. Copyright © 2014 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Equilibrium radiative heating tables for Earth entry

NASA Astrophysics Data System (ADS)

Sutton, Kenneth; Hartung, Lin C.

1990-05-01

The recent resurgence of interest in blunt-body atmospheric entry for applications such as aeroassisted orbital transfer and planetary return has engendered a corresponding revival of interest in radiative heating. Radiative heating may be of importance in these blunt-body flows because of the highly energetic shock layer around the blunt nose. Sutton developed an inviscid, stagnation point, radiation coupled flow field code for investigating blunt-body atmospheric entry. The method has been compared with ground-based and flight data, and reasonable agreement has been found. To provide information for entry body studies in support of lunar and Mars return scenarios of interest in the 1970's, the code was exercised over a matrix of Earth entry conditions. Recently, this matrix was extended slightly to reflect entry vehicle designs of current interest. Complete results are presented.

On-ground casualty risk reduction by structural design for demise

NASA Astrophysics Data System (ADS)

Lemmens, Stijn; Funke, Quirin; Krag, Holger

2015-06-01

In recent years, awareness concerning the on-ground risk posed by un-controlled re-entering space systems has increased. On average over the past decade, an object with mass above 800 kg re-enters every week from which only a few, e.g. ESA's GOCE in 2013 and NASA's UARS in 2011, appeared prominent in international media. Space agencies and nations have discussed requirements to limit the on-ground risk for future missions. To meet the requirements, the amount of debris falling back on Earth has to be limited in number, mass and size. Design for demise (D4D) refers to all measures taken in the design of a space object to increase the potential for demise of the object and its components during re-entry. SCARAB (Spacecraft Atmospheric Re-entry and Break-Up) is ESA's high-fidelity tool which analyses the thermal and structural effects of atmospheric re-entry on spacecraft with a finite-element approach. For this study, a model of a representative satellite is developed in SCARAB to serve as test-bed for D4D analyses on a structural level. The model is used as starting point for different D4D approaches based on increasing the exposure of the satellite components to the aero-thermal environment, as a way to speed up the demise. Statistical bootstrapping is applied to the resulting on-ground fragment lists in order to compare the different re-entry scenarios and to determine the uncertainties of the results. Moreover, the bootstrap results can be used to analyse the casualty risk estimator from a theoretical point of view. The risk reductions for the analysed D4D techniques are presented with respect to the reference scenario for the modelled representative satellite.

A Common Probe Design for Multiple Planetary Destinations

NASA Technical Reports Server (NTRS)

Hwang, H. H.; Allen, G. A., Jr.; Alunni, A. I.; Amato, M. J.; Atkinson, D. H.; Bienstock, B. J.; Cruz, J. R.; Dillman, R. A.; Cianciolo, A. D.; Elliott, J. O.;

Integrated Digital Flight Control System for the Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

1973-01-01

The objectives of the integrated digital flight control system (DFCS) is to provide rotational and translational control of the space shuttle orbiter in all phases of flight: from launch ascent through orbit to entry and touchdown, and during powered horizontal flights. The program provides a versatile control system structure while maintaining uniform communications with other programs, sensors, and control effectors by using an executive routine/functional subroutine format. The program reads all external variables at a single point, copies them into its dedicated storage, and then calls the required subroutines in the proper sequence. As a result, the flight control program is largely independent of other programs in the computer complex and is equally insensitive to characteristics of the processor configuration. The integrated structure is described of the control system and the DFCS executive routine which embodies that structure. The input and output, including jet selection are included. Specific estimation and control algorithm are shown for the various mission phases: cruise (including horizontal powered flight), entry, on-orbit, and boost. Attitude maneuver routines that interface with the DFCS are included.

Long-term care planning and preparation among persons with multiple sclerosis.

PubMed

Putnam, Michelle; Tang, Fengyan

2008-01-01

Individuals with multiple sclerosis (MS) primarily rely on informal supports such as family members and assistive technology to meet their daily needs. As they age, formal supports may become important to compliment these supports and sustain community-based living. No previous research exists exploring plans and preparations of persons with MS for future independent living and long-term care needs. We analyzed data from a random sample survey (N = 580) to assess knowledge and perceptions of future service needs using ANOVA, chi-square, correlations, and MANOVA procedures. Results indicate that overall, most respondents are not well informed and have not planned or prepared for future care needs. Persons reporting severe MS were more likely to plan and prepare. Key "entry points" for making preparations include receiving specific education and planning information, discussions with family and professional service providers, and increased age, education, and income. We recommend greater infusion of long-term care planning into these existing entry points and creation of new entry points including healthcare provides and insurers.

Ion photon emission microscope

DOEpatents

Doyle, Barney L.

2003-04-22

An ion beam analysis system that creates microscopic multidimensional image maps of the effects of high energy ions from an unfocussed source upon a sample by correlating the exact entry point of an ion into a sample by projection imaging of the ion-induced photons emitted at that point with a signal from a detector that measures the interaction of that ion within the sample. The emitted photons are collected in the lens system of a conventional optical microscope, and projected on the image plane of a high resolution single photon position sensitive detector. Position signals from this photon detector are then correlated in time with electrical effects, including the malfunction of digital circuits, detected within the sample that were caused by the individual ion that created these photons initially.

A Light-Weight Inflatable Hypersonic Drag Device for Planetary Entry

NASA Technical Reports Server (NTRS)

McRonald, Angus D.

1995-01-01

The author has analyzed the use of a light-weight inflatable hypersonic drag device, called a ballute, (balloon + parachute) for flight in planetary atmospheres, for entry, aerocapture, and aerobraking. Studies to date include missions to Mars, Venus, Earth, Saturn, Titan, Neptune and Pluto. Data on a Pluto lander and a Mars orbiter will be presented to illustrate the concept. The main advantage of using a ballute is that aero deceleration and heating in atmospheric entry occurs at much smaller atmospheric density with a ballute than without it. For example, if a ballute has a diameter 10 times as large as the spacecraft, for unchanged total mass, entry speed and entry angle,the atmospheric density at peak convective heating is reduced by a factor of 100, reducing the peak heating by a factor of 10 for the spacecraft, and a factor of about 30 for the ballute. Consequently the entry payload (lander, orbiter, etc) is subject to much less heating, requires a much reduced thermal protection system (possibly only an MLI blanket), and the spacecraft design is therefore relatively unchanged from its vacuum counterpart. The heat flux on the ballute is small enough to be radiated at temperatures below 800 K or so. Also, the heating may be reduced further because the ballute enters at a more shallow angle, even allowing for the increased delivery angle error. Added advantages are a smaller mass ratio of entry system to total entry mass, and freedom from the low-density and transonic instability problems that conventional rigid entry bodies suffer, since the vehicle attitude is determined by the ballute, usually released at continuum conditions (hypersonic for an orbiter, and subsonic for a lander). Also, for a lander the range from entry to touchdown is less, offering a smaller footprint. The ballute derives an entry corridor for aerocapture by entering on a path that would lead to landing, and releasing the ballute adaptively, responding to measured deceleration, at a speed computed to achieve the desired orbiter exit conditions. For a lander an accurate landing point could be achieved by providing the lander with a small gliding capacity, using the large potential energy available from being subsonic at high altitude. Alternatively the ballute can be retained to act as a parachute or soft-landing device, or to float the payload as a buoyant aerobot. As expected, the ballute has smaller size for relatively small entry speeds, such as for Mars, or for the extensive atmosphere of a low-gravity planet such as Pluto. The author will discuss presently available ballute materials and a development program of aerodynamic tests and materials that would be required for ballutes to achieve their full potential.

Point-of-care technology supports bedside documentation.

PubMed

Carlson, Elizabeth; Catrambone, Cathy; Oder, Karl; Nauseda, Susan; Fogg, Lou; Garcia, Brian; Brown, Frederick M; Johnson, Mary E; Johnson, Tricia J; Llewellyn, Jane

2010-09-01

As the conversion to an electronic health record intensifies, the question of which data-entry device works best in what environment and situation is paramount. Specifically, what is the best mix of equipment to purchase and install on clinical units based on staff preferences and budget constraints? The authors discuss their evaluation of stationary personal computers, workshops on wheels, and handheld tablets related to timeliness of data entry and their use of focus groups to ascertain the pros/cons of data-entry devices and staff preferences. An assessment of the implications for costs related to the timeliness of data entry is also presented.

A novel cost-effective computer-assisted imaging technology for accurate placement of thoracic pedicle screws.

PubMed

Abe, Yuichiro; Ito, Manabu; Abumi, Kuniyoshi; Kotani, Yoshihisa; Sudo, Hideki; Minami, Akio

2011-11-01

Use of computer-assisted spine surgery (CASS) technologies, such as navigation systems, to improve the accuracy of pedicle screw (PS) placement is increasingly popular. Despite of their benefits, previous CASS systems are too expensive to be ubiquitously employed, and more affordable and portable systems are desirable. The aim of this study was to introduce a novel and affordable computer-assisted technique that 3-dimensionally visualizes anatomical features of the pedicles and assists in PS insertion. The authors have termed this the 3D-visual guidance technique for inserting pedicle screws (3D-VG TIPS). The 3D-VG technique for placing PSs requires only a consumer-class computer with an inexpensive 3D DICOM viewer; other special equipment is unnecessary. Preoperative CT data of the spine were collected for each patient using the 3D-VG TIPS. In this technique, the anatomical axis of each pedicle can be analyzed by volume-rendered 3D models, as with existing navigation systems, and both the ideal entry point and the trajectory of each PS can be visualized on the surface of 3D-rendered images. Intraoperative guidance slides are made from these images and displayed on a TV monitor in the operating room. The surgeon can insert PSs according to these guidance slides. The authors enrolled 30 patients with adolescent idiopathic scoliosis (AIS) who underwent posterior fusion with segmental screw fixation for validation of this technique. The novel technique allowed surgeons, from office or home, to evaluate the precise anatomy of each pedicle and the risks of screw misplacement, and to perform 3D preoperative planning for screw placement on their own computer. Looking at both 3D guidance images on a TV monitor and the bony structures of the posterior elements in each patient in the operating theater, surgeons were able to determine the best entry point for each PS with ease and confidence. Using the current technique, the screw malposition rate was 4.5% in the thoracic region in corrective surgery for AIS. The authors found that 3D-VG TIPS worked on a consumer-class computer and easily visualized the ideal entry point and trajectory of PSs in any operating theater without costly special equipment. This new technique is suitable for preoperative planning and intraoperative guidance when performing reconstructive surgery with PSs.

31 CFR 306.23 - Securities eligible to be held in the TREASURY DIRECT Book-entry Securities System.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TREASURY DIRECT Book-entry Securities System. 306.23 Section 306.23 Money and Finance: Treasury Regulations... Securities eligible to be held in the TREASURY DIRECT Book-entry Securities System. (a) Eligible issues. The... conversion to the TREASURY DIRECT Book-entry Securities System. The notice shall specify the period during...

Considerations in Designing and Implementing Enhancements to COSTAR

PubMed Central

Piggins, Judith; McLatchey, John; Zielstorff, Rita; Barrett, Suzanne; Smith, Monica; Weidman-Dahl, Frances; Brown, Kibbe; Barnett, G. Octo

1982-01-01

The addition of enhancements to a COSTAR system can involve a significant investment of effort. This paper describes recent experience in implementing two major COSTAR enhancements, namely a patient-specific encounter form and an order entry and dispatch subsystem. A number of points to be considered in regard to planning and implementing such enhancements are raised, and the relative success of these two enhancements at one particular site is discussed.

Targeted True Lumen Re-Entry With the Outback Catheter: Accuracy, Success, and Complications in 100 Peripheral Chronic Total Occlusions and Systematic Review of the Literature.

PubMed

Kitrou, Panagiotis; Parthipun, Aneeta; Diamantopoulos, Athanasios; Paraskevopoulos, Ioannis; Karunanithy, Narayan; Katsanos, Konstantinos

2015-08-01

To report a single-center experience with the Outback re-entry device for targeted distal true lumen re-entry during subintimal recanalization of chronic total occlusions (CTOs) and compare the results with a systematic review of the literature. Between February 2011 and July 2013, 104 Outback devices were employed in 91 patients (mean age 64±9 years; 57 men) for subintimal recanalization of 100 vessels with CTOs after initial failure of spontaneous reentry. Fifty-two cases involved a retrograde approach to aortoiliac occlusions and 48 were re-entry attempts in infrainguinal CTOs. Outcome measures included complications and technical success, defined as successful targeted re-entry at the preplanned site of the distal true lumen. To evaluate device accuracy, the re-entry distance (between the point of true vessel reconstitution and the eventual re-entry point) was measured. Outback success was 93% (93/100); only 7 cases failed owing to heavy calcification (5/52 aortoiliac vs 2/48 infrainguinal, p=0.44). Re-entry was highly accurate, with a re-entry distance of ~1 cm in both subgroups (1.2±0.1 cm in aortoiliac vs 1.3±0.1 cm in infrainguinal, p=0.40). There were no major and 17 minor complications (9/52 aortoiliac vs 8/48 infrainguinal, p=0.93). Results are in line with the systematic review that identified 11 studies (only 1 randomized trial) involving mostly the femoropopliteal segment (119 aortoiliac and 464 infrainguinal segments). The pooled Outback success rate was 90% (95% confidence interval 85% to 94%) and the pooled complication rate was 4.3% (95% confidence interval 1.6% to 8.3%). The Outback device is safe and has a very high rate of achieving targeted true lumen re-entry, which minimizes the sacrifice of healthy vessel in the aortoiliac and infrainguinal arteries. © The Author(s) 2015.

Intravascular ultrasound guided wiring re-entry technique for complex chronic total occlusions.

PubMed

Huang, Wei-Chieh; Teng, Hsin-I; Hsueh, Chien-Hung; Lin, Shing-Jong; Chan, Wan-Leong; Lu, Tse-Min

2018-05-03

The successful recanalization rate of chronic total occlusion (CTO) lesions without retrograde collaterals available is always low. Intravascular ultrasound (IVUS) may be useful to guide the subintimal guidewire to re-enter the true lumen. We evaluated the clinical feasibility and efficacy of the IVUS-guided wiring re-entry technique for these complex CTO lesions. Twenty consecutive patients (19 male, mean age: 65.3 ± 12.8 years) with both failed antegrade and retrograde approaches were enrolled. The IVUS catheter was introduced into the subintimal space to identify the entry point into the subintimal space, and guide another stiff wire to re-enter the true lumen with the adjacent side-branch or first wire as markers, or using IVUS-guided parallel wire technique. The entry point into the subintimal space was identified by IVUS in all cases, and the IVUS-guided wiring re-entry technique succeeded in 17 cases (85%). No procedure-related complication was noted except one case of delayed cardiac tamponade due to the wire perforation. During the mean follow-up period of 1.9 ± 1.3 years, there was no adverse cardiac event, except one patient died of the complication of cardiac transplantation. The IVUS-guided wiringre-entry technique might be feasible and safe for the recanalization of complex CTO lesions. © 2018, Wiley Periodicals, Inc.

Thinking shift on health systems: from blueprint health programmes towards resilience of health systems Comment on "Constraints to applying systems thinking concepts in health systems: A regional perspective from surveying stakeholders in Eastern Mediterranean countries".

PubMed

Blanchet, Karl

2015-03-03

International health is still highly dominated by equilibrium approaches. The emergence of systems thinking in international health provides a great avenue to develop innovative health interventions adapted to changing contexts. The public health community, nevertheless, has the responsibility to translate concepts related to systems thinking and complexity into concrete research methods and interventions. One possibility is to consider the properties of systems such as resilience and adaptability as entry points to better understand how health systems react to shocks. © 2015 by Kerman University of Medical Sciences.

Modified C1 lateral mass screw insertion using a high entry point to avoid postoperative occipital neuralgia.

PubMed

Lee, Sun-Ho; Kim, Eun-Sang; Eoh, Whan

2013-01-01

For the past decade, a screw-rod construct has been used commonly to stabilize the atlantoaxial joint, but the insertion of the screw through the C1 lateral mass (LM) can cause several complications. We evaluated whether using a higher screw entry point for C1 lateral mass (LM) fixation than in the standard procedure could prevent screw-induced occipital neuralgia. We enrolled 12 consecutive patients who underwent bilateral C1 LM fixation, with the modified screw insertion point at the junction of the C1 posterior arch and the midpoint of the posterior inferior portion of the C1 LM. We measured postoperative clinical and radiological parameters and recorded intraoperative complications, postoperative neurological deficits and the occurrence of occipital neuralgia. Postoperative plain radiographs were used to check for malpositioning of the screw or failure of the construct. Four patients underwent atlantoaxial stabilization for a transverse ligament injury or a C1 or C2 fracture, six patients for os odontoideum, and two patients for C2 metastasis. No patient experienced vertebral artery injury or cerebrospinal fluid leak, and all had minimal blood loss. No patient suffered significant occipital neuralgia, although one patient developed mild, transient unilateral neuralgia. There was also no radiographic evidence of construct failure. Twenty screws were positioned correctly through the intended entry points, but three screws were placed inferiorly (that is, below the arch), and one screw was inserted too medially. When performing C1-C2 fixation using the standard (Harms) construct, surgeons should be aware of the possible development of occipital neuralgia. A higher entry point may prevent this complication; therefore, we recommend that the screw should be inserted into the arch of C1 if it can be accommodated. Copyright © 2012 Elsevier Ltd. All rights reserved.

Why Some Dash, Why Others Hobble. School Publications

ERIC Educational Resources Information Center

Nation's Schools, 1972

1972-01-01

Judges of first annual school publications contest discuss both good and bad points about publications submitted in the six contest categories of recruitment, finance, community newsletters, internal publications, annual reports, and special topic publications. Of the 736 entries from 289 school districts in 43 states, 151 entries were selected.…

47 CFR 2.1205 - Filing of required declaration.

Code of Federal Regulations, 2013 CFR

2013-10-01

... TREATY MATTERS; GENERAL RULES AND REGULATIONS Importation of Devices Capable of Causing Harmful... Customs has not been implemented, use FCC Form 740 to provide the needed information and declarations. Attach a copy of the completed FCC Form 740 to the Customs entry papers. (b)(1) For points of entry where...

47 CFR 2.1205 - Filing of required declaration.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TREATY MATTERS; GENERAL RULES AND REGULATIONS Importation of Devices Capable of Causing Harmful... Customs has not been implemented, use FCC Form 740 to provide the needed information and declarations. Attach a copy of the completed FCC Form 740 to the Customs entry papers. (b)(1) For points of entry where...

47 CFR 2.1205 - Filing of required declaration.

Code of Federal Regulations, 2012 CFR

2012-10-01

... TREATY MATTERS; GENERAL RULES AND REGULATIONS Importation of Devices Capable of Causing Harmful... Customs has not been implemented, use FCC Form 740 to provide the needed information and declarations. Attach a copy of the completed FCC Form 740 to the Customs entry papers. (b)(1) For points of entry where...

47 CFR 2.1205 - Filing of required declaration.

Code of Federal Regulations, 2011 CFR

2011-10-01

... TREATY MATTERS; GENERAL RULES AND REGULATIONS Importation of Devices Capable of Causing Harmful... Customs has not been implemented, use FCC Form 740 to provide the needed information and declarations. Attach a copy of the completed FCC Form 740 to the Customs entry papers. (b)(1) For points of entry where...

76 FR 13703 - New Origin Entry Separation & Containerization Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... requirements for mailings and the number of pieces required per presort level will remain the same. Except as... for Periodicals piece processing based on the origin entry point. Prepare container (pallet) placards... for a reduction of sack handling and the expedited processing of individual pieces, and will result in...

32 CFR 525.4 - Entry authorization (policy).

Code of Federal Regulations, 2014 CFR

2014-07-01

... single or multiple entries. (4) Captains of ships and/or marine vessels planning to enter Kwajalein... of passengers (include list when practicable). (vi) Purpose of flight. (vii) Plan of flight route, including the point of origin of flight and its designation and estimated date and times of arrival and...

32 CFR 525.4 - Entry authorization (policy).

Code of Federal Regulations, 2013 CFR

2013-07-01

... single or multiple entries. (4) Captains of ships and/or marine vessels planning to enter Kwajalein... of passengers (include list when practicable). (vi) Purpose of flight. (vii) Plan of flight route, including the point of origin of flight and its designation and estimated date and times of arrival and...

Review of chemical-kinetic problems of future NASA missions, II: Mars entries

NASA Technical Reports Server (NTRS)

Park, Chul; Howe, John T.; Jaffe, Richard L.; Candler, Graham V.

1994-01-01

The present work aims to derive a set of thermomechanical relaxation rate parameters and chemical reaction rate coefficients relevant to future interplanetary missions. It also attempts to assess the impact of thermochemical nonequilibrium phenomena on radiative heating rates for the stagnation point of the Martian entry vehicle.

31 CFR 357.0 - Book-entry systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Book-entry systems. 357.0 Section 357..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING BOOK-ENTRY TREASURY BONDS, NOTES AND BILLS HELD IN LEGACY TREASURY DIRECT General Information § 357.0 Book-entry systems. (a) Treasury...

De Novo Herpes Simplex Virus VP16 Expression Gates a Dynamic Programmatic Transition and Sets the Latent/Lytic Balance during Acute Infection in Trigeminal Ganglia.

PubMed

Sawtell, Nancy M; Thompson, Richard L

2016-09-01

The life long relationship between herpes simplex virus and its host hinges on the ability of the virus to aggressively replicate in epithelial cells at the site of infection and transport into the nervous system through axons innervating the infection site. Interaction between the virus and the sensory neuron represents a pivot point where largely unknown mechanisms lead to a latent or a lytic infection in the neuron. Regulation at this pivot point is critical for balancing two objectives, efficient widespread seeding of the nervous system and host survival. By combining genetic and in vivo in approaches, our studies reveal that the balance between latent and lytic programs is a process occurring early in the trigeminal ganglion. Unexpectedly, activation of the latent program precedes entry into the lytic program by 12 -14hrs. Importantly, at the individual neuronal level, the lytic program begins as a transition out of this acute stage latent program and this escape from the default latent program is regulated by de novo VP16 expression. Our findings support a model in which regulated de novo VP16 expression in the neuron mediates entry into the lytic cycle during the earliest stages of virus infection in vivo. These findings support the hypothesis that the loose association of VP16 with the viral tegument combined with sensory axon length and transport mechanisms serve to limit arrival of virion associated VP16 into neuronal nuclei favoring latency. Further, our findings point to specialized features of the VP16 promoter that control the de novo expression of VP16 in neurons and this regulation is a key component in setting the balance between lytic and latent infections in the nervous system.

De Novo Herpes Simplex Virus VP16 Expression Gates a Dynamic Programmatic Transition and Sets the Latent/Lytic Balance during Acute Infection in Trigeminal Ganglia

PubMed Central

Sawtell, Nancy M.; Thompson, Richard L.

2016-01-01

The life long relationship between herpes simplex virus and its host hinges on the ability of the virus to aggressively replicate in epithelial cells at the site of infection and transport into the nervous system through axons innervating the infection site. Interaction between the virus and the sensory neuron represents a pivot point where largely unknown mechanisms lead to a latent or a lytic infection in the neuron. Regulation at this pivot point is critical for balancing two objectives, efficient widespread seeding of the nervous system and host survival. By combining genetic and in vivo in approaches, our studies reveal that the balance between latent and lytic programs is a process occurring early in the trigeminal ganglion. Unexpectedly, activation of the latent program precedes entry into the lytic program by 12 -14hrs. Importantly, at the individual neuronal level, the lytic program begins as a transition out of this acute stage latent program and this escape from the default latent program is regulated by de novo VP16 expression. Our findings support a model in which regulated de novo VP16 expression in the neuron mediates entry into the lytic cycle during the earliest stages of virus infection in vivo. These findings support the hypothesis that the loose association of VP16 with the viral tegument combined with sensory axon length and transport mechanisms serve to limit arrival of virion associated VP16 into neuronal nuclei favoring latency. Further, our findings point to specialized features of the VP16 promoter that control the de novo expression of VP16 in neurons and this regulation is a key component in setting the balance between lytic and latent infections in the nervous system. PMID:27607440

A noniterative greedy algorithm for multiframe point correspondence.

PubMed

Shafique, Khurram; Shah, Mubarak

2005-01-01

This paper presents a framework for finding point correspondences in monocular image sequences over multiple frames. The general problem of multiframe point correspondence is NP-hard for three or more frames. A polynomial time algorithm for a restriction of this problem is presented and is used as the basis of the proposed greedy algorithm for the general problem. The greedy nature of the proposed algorithm allows it to be used in real-time systems for tracking and surveillance, etc. In addition, the proposed algorithm deals with the problems of occlusion, missed detections, and false positives by using a single noniterative greedy optimization scheme and, hence, reduces the complexity of the overall algorithm as compared to most existing approaches where multiple heuristics are used for the same purpose. While most greedy algorithms for point tracking do not allow for entry and exit of the points from the scene, this is not a limitation for the proposed algorithm. Experiments with real and synthetic data over a wide range of scenarios and system parameters are presented to validate the claims about the performance of the proposed algorithm.

A Mis-recognized Medical Vocabulary Correction System for Speech-based Electronic Medical Record

PubMed Central

Seo, Hwa Jeong; Kim, Ju Han; Sakabe, Nagamasa

2002-01-01

Speech recognition as an input tool for electronic medical record (EMR) enables efficient data entry at the point of care. However, the recognition accuracy for medical vocabulary is much poorer than that for doctor-patient dialogue. We developed a mis-recognized medical vocabulary correction system based on syllable-by-syllable comparison of speech text against medical vocabulary database. Using specialty medical vocabulary, the algorithm detects and corrects mis-recognized medical vocabularies in narrative text. Our preliminary evaluation showed 94% of accuracy in mis-recognized medical vocabulary correction.

Jupiter Europa Orbiter Architecture Definition Process

NASA Technical Reports Server (NTRS)

Rasmussen, Robert; Shishko, Robert

2011-01-01

The proposed Jupiter Europa Orbiter mission, planned for launch in 2020, is using a new architectural process and framework tool to drive its model-based systems engineering effort. The process focuses on getting the architecture right before writing requirements and developing a point design. A new architecture framework tool provides for the structured entry and retrieval of architecture artifacts based on an emerging architecture meta-model. This paper describes the relationships among these artifacts and how they are used in the systems engineering effort. Some early lessons learned are discussed.

Mars Pathfinder flight system integration and test.

NASA Astrophysics Data System (ADS)

Muirhead, B. K.

This paper describes the system integration and test experiences, problems and lessons learned during the assembly, test and launch operations (ATLO) phase of the Mars Pathfinder flight system scheduled to land on the surface of Mars on July 4, 1997. The Mars Pathfinder spacecraft consists of three spacecraft systems: cruise stage, entry vehicle and lander. The cruise stage carries the entry and lander vehicles to Mars and is jettisoned prior to entry. The entry vehicle, including aeroshell, parachute and deceleration rockets, protects the lander during the direct entry and reduces its velocity from 7.6 to 0 km/s in stages during the 5 min entry sequence. The lander's touchdown is softened by airbags which are retracted once stopped on the surface. The lander then uprights itself, opens up fully and begins surface operations including deploying its camera and rover. This paper overviews the system design and the results of the system integration and test activities, including the entry, descent and landing subsystem elements. System test experiences including science instruments, the microrover, Sojourner, and software are discussed. The final qualification of the entry, descent and landing subsystems during this period is also discussed.

Successful revascularization of chronic total occlusion of lower extremity arteries: a wire only and bail out use of re-entry device approach.

PubMed

Langhoff, R; Stumpe, S; Treitl, M; Schulte, K L

2013-10-01

The management of progressive peripheral artery disease experienced a vast change in paradigms over the last decades for the benefit of minimal invasive therapy as a first-line strategy. With the constant development of new devices, materials and dedicated access strategies, more complex lesions can be managed but the limitations to successfully treat chronic total occlusions are still the challenge to re-enter the true lumen. The aim of this retrospective study was to investigate, if a "wire only" strategy leads to an acceptable success rate in a mixed cohort of CTO lesions and to what extend re-entry devices are used. We retrospectively analyzed patients treated at the Vascular Center Berlin between 2011 and 2013 with chronic total occlusion out of a prospective conducted database (Endovascular MILestones - EMIL) for demographics, risk factors, co-morbidities, technical success rates, lesion characteristics and use of guidewires as well as re-entry systems. A total of 128 patients with 146 lesions, which represent a subgroup of all the cases performed in our center, following a predefined treatment algorithm for chronic total occlusions (CTOs), have been analyzed. We achieved a technical success in 133 (91.1%) of all cases following a "wire only" strategy. Out of 13 (8.9%) CTOs with technical failure in 7 (53.9%) CTOs a re-entry device (Off-Road®) with a 100% technical success has been used. In 91.1% of chronic total occlusion lesions the use of 2 wires only (88.7%) led to a successful recanalization. A "wire only" strategy followed by the use of a re-entry device as a bail out strategy, led to a total of 140 (96%) lesions to be successfully recanalized. In more than 90% of all cases with chronic total occlusion of peripheral lower extremity arteries, endovascular intervention has been successful following a "wire only" strategy. When deciding to use a re-entry device, in case of a failure of a proper wire re-entry at the reconstitution point, a technical success rate of 100% was achieved. Therefore following a strict wire algorithm and considering the use of a re-entry system as a bail out strategy will lead to a successful minimal invasive management of chronic total occlusion in nearly 100% of the cases with TASC II A - D lesions.

Satellite Re-entry Modeling and Uncertainty Quantification

NASA Astrophysics Data System (ADS)

Horsley, M.

2012-09-01

LEO trajectory modeling is a fundamental aerospace capability and has applications in many areas of aerospace, such as maneuver planning, sensor scheduling, re-entry prediction, collision avoidance, risk analysis, and formation flying. Somewhat surprisingly, modeling the trajectory of an object in low Earth orbit is still a challenging task. This is primarily due to the large uncertainty in the upper atmospheric density, about 15-20% (1-sigma) for most thermosphere models. Other contributions come from our inability to precisely model future solar and geomagnetic activities, the potentially unknown shape, material construction and attitude history of the satellite, and intermittent, noisy tracking data. Current methods to predict a satellite's re-entry trajectory typically involve making a single prediction, with the uncertainty dealt with in an ad-hoc manner, usually based on past experience. However, due to the extreme speed of a LEO satellite, even small uncertainties in the re-entry time translate into a very large uncertainty in the location of the re-entry event. Currently, most methods simply update the re-entry estimate on a regular basis. This results in a wide range of estimates that are literally spread over the entire globe. With no understanding of the underlying distribution of potential impact points, the sequence of impact points predicted by the current methodology are largely useless until just a few hours before re-entry. This paper will discuss the development of a set of the High Performance Computing (HPC)-based capabilities to support near real-time quantification of the uncertainty inherent in uncontrolled satellite re-entries. An appropriate management of the uncertainties is essential for a rigorous treatment of the re-entry/LEO trajectory problem. The development of HPC-based tools for re-entry analysis is important as it will allow a rigorous and robust approach to risk assessment by decision makers in an operational setting. Uncertainty quantification results from the recent uncontrolled re-entry of the Phobos-Grunt satellite will be presented and discussed. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Drag De-Orbit Device: A New Standard Re-Entry Actuator for CubeSats

NASA Technical Reports Server (NTRS)

Guglielmo, David; Omar, Sanny; Bevilacqua, Riccardo

2017-01-01

With the advent of CubeSats, research in Low Earth Orbit (LEO) becomes possible for universities and small research groups. Only a handful of launch sites can be used, due to geographical and political restrictions. As a result, common orbits in LEO are becoming crowded due to the additional launches made possible by low-cost access to space. CubeSat design principles require a maximum of a 25-year orbital lifetime in an effort to reduce the total number of spacecraft in orbit at any time. Additionally, since debris may survive re-entry, it is ideal to de-orbit spacecraft over unpopulated areas to prevent casualties. The Drag Deorbit Device (D3) is a self-contained targeted re-entry subsystem intended for CubeSats. By varying the cross-wind area, the atmospheric drag can be varied in such a way as to produce desired maneuvers. The D3 is intended to be used to remove spacecraft from orbit to reach a desired target interface point. Additionally, attitude stabilization is performed by the D3 prior to deployment and can replace a traditional ADACS on many missions.This paper presents the hardware used in the D3 and operation details. Four stepper-driven, repeatedly retractable booms are used to modify the cross-wind area of the D3 and attached spacecraft. Five magnetorquers (solenoids) over three axes are used to damp rotational velocity. This system is expected to be used to improve mission flexibility and allow additional launches by reducing the orbital lifetime of spacecraft.The D3 can be used to effect a re-entry to any target interface point, with the orbital inclination limiting the maximum latitude. In the chance that the main spacecraft fails, a timer will automatically deploy the booms fully, ensuring the spacecraft will at the minimum reenter the atmosphere in the minimum possible time, although not necessarily at the desired target interface point. Although this does not reduce the risk of casualties, the 25-year lifetime limit is still respected, allowing a reduction of the risk associated with a hardware failure.

Usability Evaluation of Electronic Health Record System around Clinical Notes Usage-An Ethnographic Study.

PubMed

Rizvi, Rubina F; Marquard, Jenna L; Hultman, Gretchen M; Adam, Terrence J; Harder, Kathleen A; Melton, Genevieve B

2017-10-01

Background A substantial gap exists between current Electronic Health Record (EHR) usability and potential optimal usability. One of the fundamental reasons for this discrepancy is poor incorporation of a User-Centered Design (UCD) approach during the Graphical User Interface (GUI) development process. Objective To evaluate usability strengths and weaknesses of two widely implemented EHR GUIs for critical clinical notes usage tasks. Methods Twelve Internal Medicine resident physicians interacting with one of the two EHR systems (System-1 at Location-A and System-2 at Location-B) were observed by two usability evaluators employing an ethnographic approach. User comments and observer findings were analyzed for two critical tasks: (1) clinical notes entry and (2) related information-seeking tasks. Data were analyzed from two standpoints: (1) usability references categorized by usability evaluators as positive, negative, or equivocal and (2) usability impact of each feature measured through a 7-point severity rating scale. Findings were also validated by user responses to a post observation questionnaire. Results For clinical notes entry, System-1 surpassed System-2 with more positive (26% vs. 12%) than negative (12% vs. 34%) usability references. Greatest impact features on EHR usability (severity score pertaining to each feature) for clinical notes entry were: autopopulation (6), screen options (5.5), communication (5), copy pasting (4.5), error prevention (4.5), edit ability (4), and dictation and transcription (3.5). Both systems performed equally well on information-seeking tasks and features with greatest impacts on EHR usability were navigation for notes (7) and others (e.g., looking for ancillary data; 5.5). Ethnographic observations were supported by follow-up questionnaire responses. Conclusion This study provides usability-specific insights to inform future, improved, EHR interface that is better aligned with UCD approach.

The Relationship among Health Education Systems, Inc. Progression and Exit Examination Scores, Day or Evening Enrollment, Final Grade Point Average and NCLEX-RN® Success in Associate Degree Nursing Students

ERIC Educational Resources Information Center

Barnwell-Sanders, Pamela

2015-01-01

Graduates of associate degree (AD) nursing programs form the largest segment of first-time National Council Licensure Examination for Registered Nurses (NCLEX-RN®) test takers, yet also experience the highest rate of NCLEX-RN® failures. NCLEX-RN® failure delays entry into the profession, adding an emotional and financial toll to the unsuccessful…

A Scalable and Dynamic Testbed for Conducting Penetration-Test Training in a Laboratory Environment

DTIC Science & Technology

2015-03-01

entry point through which to execute a payload to accomplish a higher-level goal: executing arbitrary code, escalating privileges , pivoting...Mobile Ad Hoc Network Emulator (EMANE)26 can emulate the entire network stack (physical to application -layer protocols). 2. Methodology To build a...to host Windows, Linux, MacOS, Android , and other operating systems without much effort. 4 E. A simple and automatic “restore” function: Many

Structural Analysis via Generalized Interactive Graphics - STAGING. Volume IV. Appendices to System Manual.

DTIC Science & Technology

1979-09-01

CAN 𔃽E GALLEO 3y: GCOSF G(,jPSF GCUNPFk’ E NT py_ SC.A5S4 A 1’ _ _S FG MEN T ( O OESC I £NITE, TE. - UNPACK SUBFILE OR OAE LIST LENr ,TH1 75...SEGMENTS (PR2) DESCS SET LINE MODE IN DRAFTING LENr ,THI ------- 5 --lANGUAGES FTN . ...... - HAS NO SECONDARY ENTRY POINTS CAN BE CALLED BYI PRTADLE B DSTR

Special Inspector General for Iraq Reconstruction, Report to Congress, January 30, 2007

DTIC Science & Technology

2007-01-30

quarter that 114 border forts have been constructed thus far, and 5 points of entry have been completed.315 SIGIR’s ground project surveys ...security services.366 Lt. Gen. Dempsey recently estimated that 20-25% of the National Police “needed to be weeded out.”367 Finally, recent surveys ...sector development Transportation and Communications system, 33 site surveys have been completed for the communication towers between Mosul and

Exploration of Impinging Water Spray Heat Transfer at System Pressures Near the Triple Point

NASA Technical Reports Server (NTRS)

Golliher, Eric L.; Yao, Shi-Chune

2013-01-01

The heat transfer of a water spray impinging upon a surface in a very low pressure environment is of interest to cooling of space vehicles during launch and re-entry, and to industrial processes where flash evaporation occurs. At very low pressure, the process occurs near the triple point of water, and there exists a transient multiphase transport problem of ice, water and water vapor. At the impingement location, there are three heat transfer mechanisms: evaporation, freezing and sublimation. A preliminary heat transfer model was developed to explore the interaction of these mechanisms at the surface and within the spray.

Percutaneous computer-assisted translaminar facet screw: an initial human cadaveric study.

PubMed

Sasso, Rick C; Best, Natalie M; Potts, Eric A

2005-01-01

Translaminar facet screws are a minimally invasive technique for posterior lumbar fixation with good success rates. Computer-assisted image navigation using virtual fluoroscopy allows multiple simultaneous screens in various planes to plan and drive spinal instrumentation. This study evaluates the percutaneous placement of translaminar facet screws with the use of virtual fluoroscopy as an image guidance technique. A human cadaveric study was performed with a percutaneous reference frame applied to the iliac crest. Ten translaminar facet screws were placed bilaterally at five levels. Anteroposterior and lateral images were used to navigate 4.0-mm screws through a percutaneous portal under virtual fluoroscopy. An axial computed tomographic scan through the instrumented levels was obtained after the screws were placed. Screws were graded on entry, course through the lamina, and terminus. A grading system was devised to grade the course through the lamina. All 10 screw-entry points were judged optimal at the spinous process laminar junction. There were five Grade I breeches with less than 1/2 the screw through the lamina, and five Grade 0 screw placements with the screw contained completely within the lamina. The termination point was acceptable in five screws. The screws that began on the right and terminated on the left were all found to have grade II breakouts. No screws placed the spinal canal or exiting nerve root at risk. Virtual fluoroscopy provides significant assistance in percutaneous placement of translaminar facet screws and results in safe position of entry, lamina course, and terminus.

An ultra fast detection method reveals strain-induced Ca(2+) entry via TRPV2 in alveolar type II cells.

PubMed

Fois, Giorgio; Wittekindt, Oliver; Zheng, Xing; Felder, Erika Tatiana; Miklavc, Pika; Frick, Manfred; Dietl, Paul; Felder, Edward

2012-09-01

A commonly used technique to investigate strain-induced responses of adherent cells is culturing them on an elastic membrane and globally stretching the membrane. However, it is virtually impossible to acquire microscopic images immediately after the stretch with this method. Using a newly developed technique, we recorded the strain-induced increase of the cytoplasmic Ca(2+) concentration ([Ca(2+)](c)) in rat primary alveolar type II (ATII) cells at an acquisition rate of 30ms and without any temporal delay. We can show that the onset of the mechanically induced rise in [Ca(2+)](c) was very fast (<30 ms), and Ca(2+) entry was immediately abrogated when the stimulus was withdrawn. This points at a direct mechanical activation of an ion channel. RT-PCR revealed high expression of TRPV2 in ATII cells, and silencing TRPV2, as well as blocking TRPV channels with ruthenium red, significantly reduced the strain-induced Ca(2+) response. Moreover, the usually homogenous pattern of the strain-induced [Ca(2+)](c) increase was converted into a point-like response after both treatments. Also interfering with actin/myosin and integrin binding inhibited the strain-induced increase of [Ca(2)](c). We conclude that TRPV2 participates in strain-induced Ca(2+) entry in ATII cells and suggest a direct mechanical activation of the channel that depends on FAs and actin/myosin. Furthermore, our results underline the importance of cell strain systems that allow high temporal resolution.

Overestimation of femoral tunnel length during anterior cruciate ligament reconstruction using the retrograde outside-in drilling technique.

PubMed

Okazaki, Ken; Osaki, Kanji; Nishikawa, Kazutaka; Matsubara, Hirokazu; Tashiro, Yasutaka; Iwamoto, Yukihide

2016-08-01

When the femoral tunnel socket is reamed in an oblique direction from the wall of inter-condylar notch in anterior cruciate ligament (ACL) reconstruction, the tunnel length can be shorter at the periphery than at the centre. Because surgeons can manipulate the direction of tunnel in the outside-in femoral tunnel drilling technique, this length mismatch would vary depending on the direction of the tunnel. The purpose of this study was to investigate this length mismatch when reamed in various directions. In total of thirteen points were defined as femoral drilling entry points on concentric lines with 0, 1, 2, and 3 cm radius from the lateral epicondyle of a three-dimensional bone model from 40 subjects. Femoral tunnel drilling was simulated on the models by connecting the centre of the ACL footprint with each defined point on the lateral femoral surface. The mismatch length was measured between the centre and the shortest peripheral side of the tunnel socket. When the distance between the drilling entry point on the lateral femoral surface and the lateral epicondyle was increased to anterior proximal direction, there was a significant increase in the mismatch length. The mismatch length became more than 2 mm when the entry point was located more than 2 cm away from the lateral epicondyle. When the drilling entry point is set far away from the lateral epicondyle, a significant increase was observed in tunnel length mismatch between the centre of the tunnel and its shortest peripheral side. Because the tunnel length is measured with a guide pin introduced at the centre of the tunnel before reaming in retrograde outside-in technique, this length mismatch could cause an overestimation of the tunnel length. Surgeons should recognise this mismatch when preparing the length of graft and socket to optimise the graft insertion length into the socket.

22 CFR 202.3 - Freight reimbursement limitations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the shipment of donated or purchased supplies to a recipient country requires the following... transportation of supplies from pickup point in initial port of discharge to designated point of entry in the...

Unintended Consequences of US Immigration Policy: Explaining the Post-1965 Surge from Latin America

PubMed Central

Massey, Douglas S; Pren, Karen A.

2012-01-01

The year 1965 is often cited as a turning point in the history of US immigration, but what happened in the ensuing years is not well understood. Amendments to the Immigration and Nationality Act passed in that year repealed the national origins quotas, which had been enacted during the 1920s in a deliberate attempt to limit the entry of Southern and Eastern European immigrants—or more specifically Jews from the Russian Pale and Catholics from Poland and Italy, groups at the time deemed “unassimilable.” The quotas supplemented prohibitions already in place that effectively banned the entry of Asians and Africans. The 1965 amendments were intended to purge immigration law of its racist legacy by replacing the old quotas with a new system that allocated residence visas according to a neutral preference system based on family reunification and labor force needs. The new system is widely credited with having sparked a shift in the composition of immigration away from Europe toward Asia and Latin America, along with a substantial increase in the number of immigrants. PMID:22833862

Can surface electromyography improve surgery planning? Electromyographic assessment and intraoperative verification of the nerve bundle entry point location of the gracilis muscle.

PubMed

Romaniszyn, Michal; Walega, Piotr; Nowakowski, Michal; Nowak, Wojciech

2016-06-01

To verify the precision of surface electromyography (sEMG) in locating the innervation zone of the gracilis muscle, by comparing the location of the IZ estimated by means of sEMG with in vivo location of the nerve bundle entry point in patients before graciloplasty procedure due to fecal incontinence. Nine patients who qualified for the graciloplasty procedure underwent sEMG on both gracilis muscle before their operations. During surgery the nerve bundle was identified by means of electrical stimulation. The distance between the proximal attachment and the nerve entry point into the muscle's body was measured. Both measurements (sEMG and in vivo identification) were compared for each subject. On average, the IZ was located 65.5mm from the proximal attachment. The mean difference in location of the innervation zones in each individual was 10±9.7mm, maximal - 30mm, the difference being statistically significant (p=0.017). It was intraoperatively confirmed, that the nerve entered the muscle an average of 62mm from the proximal attachment. The largest difference between the EMG IZ estimation and nerve bundle entry point was 5mm (mean difference 2.8mm, p=0.767). Preoperative surface electromyography of both gracilis muscles is a safe, precise and reliable method of assessing the location of the innervation zones of the gracilis muscles. The asymmetry of the IZ location in left and right muscles may be important in context of technical aspects of the graciloplasty procedure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Accuracy comparison of guided surgery for dental implants according to the tissue of support: a systematic review and meta-analysis.

PubMed

Raico Gallardo, Yolanda Natali; da Silva-Olivio, Isabela Rodrigues Teixeira; Mukai, Eduardo; Morimoto, Susana; Sesma, Newton; Cordaro, Luca

2017-05-01

To systematically assess the current dental literature comparing the accuracy of computer-aided implant surgery when using different supporting tissues (tooth, mucosa, or bone). Two reviewers searched PubMed (1972 to January 2015) and the Cochrane Central Register of Controlled Trials (Central) (2002 to January 2015). For the assessment of accuracy, studies were included with the following outcome measures: (i) angle deviation, (ii) deviation at the entry point, and (iii) deviation at the apex. Eight clinical studies from the 1602 articles initially identified met the inclusion criteria for the qualitative analysis. Four studies (n = 599 implants) were evaluated using meta-analysis. The bone-supported guides showed a statistically significant greater deviation in angle (P < 0.001), entry point (P = 0.01), and the apex (P = 0.001) when compared to the tooth-supported guides. Conversely, when only retrospective studies were analyzed, not significant differences are revealed in the deviation of the entry point and apex. The mucosa-supported guides indicated a statistically significant greater reduction in angle deviation (P = 0.02), deviation at the entry point (P = 0.002), and deviation at the apex (P = 0.04) when compared to the bone-supported guides. Between the mucosa- and tooth-supported guides, there were no statistically significant differences for any of the outcome measures. It can be concluded that the tissue of the guide support influences the accuracy of computer-aided implant surgery. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Numerical Skip-Entry Guidance

NASA Technical Reports Server (NTRS)

Tigges, Michael; Crull, Timothy; Rea, Jeremy; Johnson, Wyatt

2006-01-01

This paper assesses a preliminary guidance and targeting strategy for accomplishing Skip-Entry (SE) flight during a lunar return-capsule entry flight. One of the primary benefits of flying a SE trajectory is to provide the crew with continuous Continental United States (CONUS) landing site access throughout the lunar month. Without a SE capability, the capsule must land either in water or at one of several distributed land sites in the Southern Hemisphere for a significant portion of a lunar month using a landing and recovery scenario similar to that employed during the Apollo program. With a SE trajectory, the capsule can land either in water at a site in proximity to CONUS or at one of several distributed landing sites within CONUS, thereby simplifying the operational requirements for crew retrieval and vehicle recovery, and possibly enabling a high degree of vehicle reusability. Note that a SE capability does not require that the vehicle land on land. A SE capability enables a longer-range flight than a direct-entry flight, which permits the vehicle to land at a much greater distance from the Entry Interface (EI) point. This does not exclude using this approach to push the landing point to a water location in proximity of CONUS and utilizing water or airborne recovery forces.

24 CFR 350.11 - Notice of Attachment for Ginnie Mae Securities in Book-entry System.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Securities in Book-entry System. 350.11 Section 350.11 Housing and Urban Development Regulations Relating to... AND URBAN DEVELOPMENT BOOK-ENTRY PROCEDURES § 350.11 Notice of Attachment for Ginnie Mae Securities in Book-entry System. The interest of a debtor in a Security Entitlement may be reached by a creditor only...

24 CFR 350.11 - Notice of Attachment for Ginnie Mae Securities in Book-entry System.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Securities in Book-entry System. 350.11 Section 350.11 Housing and Urban Development Regulations Relating to... AND URBAN DEVELOPMENT BOOK-ENTRY PROCEDURES § 350.11 Notice of Attachment for Ginnie Mae Securities in Book-entry System. The interest of a debtor in a Security Entitlement may be reached by a creditor only...

24 CFR 350.11 - Notice of Attachment for Ginnie Mae Securities in Book-entry System.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Securities in Book-entry System. 350.11 Section 350.11 Housing and Urban Development Regulations Relating to... AND URBAN DEVELOPMENT BOOK-ENTRY PROCEDURES § 350.11 Notice of Attachment for Ginnie Mae Securities in Book-entry System. The interest of a debtor in a Security Entitlement may be reached by a creditor only...

77 FR 63424 - Announcement of Competition Under the America COMPETES Reauthorization Act of 2011: Veterans...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-16

...), relating to contact information. e. Section 4(d), relating to optional descriptive materials. 3. If... means it determines suitable to evaluate any entry, award points and determine any winner in this... Compatible. c. Functional Evaluation. VA will evaluate an entry that has demonstrated Technical Compatibility...

Encounters with Authority: Tactics and Negotiations at the Periphery of Participatory Platforms

ERIC Educational Resources Information Center

Mugar, Gabriel

2017-01-01

Digital participatory platforms like Wikipedia are often celebrated as projects that allow anyone to contribute. Any user can sign up and start contributing immediately. Similarly, projects that engage volunteers in the production of scientific knowledge create easy points of entry to make contributions. These low barriers to entry are a hallmark…

47 CFR 68.105 - Minimum point of entry (MPOE) and demarcation point.

Code of Federal Regulations, 2010 CFR

2010-10-01

... be either the closest practicable point to where the wiring crosses a property line or the closest practicable point to where the wiring enters a multiunit building or buildings. The reasonable and... situations. (c) Single unit installations. For single unit installations existing as of August 13, 1990, and...

Post-Flight EDL Entry Guidance Performance of the 2011 Mars Science Laboratory Mission

NASA Technical Reports Server (NTRS)

Mendeck, Gavin F.; McGrew, Lynn Craig

2013-01-01

The 2011 Mars Science Laboratory was the first Mars guided entry which safely delivered the rover to a landing within a touchdown ellipse of 19.1 km x 6.9 km. The Entry Terminal Point Controller guidance algorithm is derived from the final phase Apollo Command Module guidance and, like Apollo, modulates the bank angle to control the range flown. The guided entry performed as designed without any significant exceptions. The Curiosity rover was delivered about 2.2 km from the expected touchdown. This miss distance is attributed to little time to correct the downrange drift from the final bank reversal and a suspected tailwind during heading alignment. The successful guided entry for the Mars Science Laboratory lays the foundation for future Mars missions to improve upon.

31 CFR 357.22 - Transfers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND BILLS HELD IN LEGACY TREASURY DIRECT Legacy Treasury Direct Book-Entry Securities System (Legacy...-entry system, and TreasuryDirect ®. A security may also be transferred between accounts in Legacy... system. A transfer of a security from Legacy Treasury Direct to the commercial book-entry system is...

A Light-Weight Inflatable Hypersonic Drag Device for Planetary Entry

NASA Technical Reports Server (NTRS)

McRonald, Angus D.

2000-01-01

The author has analyzed the use of a light-weight inflatable hypersonic drag device, called a ballute, for flight in planetary atmospheres, for entry, aerocapture, and aerobraking. Studies to date include Mars, Venus, Earth, Saturn, Titan, Neptune and Pluto, and data on a Pluto lander and a Mars orbiter will be presented to illustrate the concept. The main advantage of using a ballute is that aero, deceleration and heating in atmospheric entry occurs at much smaller atmospheric density with a ballute than without it. For example, if a ballute has a diameter 10 times as large as the spacecraft, for unchanged total mass, entry speed and entry angle,the atmospheric density at peak convective heating is reduced by a factor of 100, reducing the heating by a factor of 10 for the spacecraft and a factor of 30 for the ballute. Consequently the entry payload (lander, orbiter, etc) is subject to much less heating, requires a much reduced thermal. protection system (possibly only an MLI blanket), and the spacecraft design is therefore relatively unchanged from its vacuum counterpart. The heat flux on the ballute is small enough to be radiated at temperatures below 800 K or so. Also, the heating may be reduced further because the ballute enters at a more shallow angle, even allowing for the increased delivery angle error. Added advantages are less mass ratio of entry system to total entry mass, and freedom from the low-density and transonic instability problems that conventional rigid entry bodies suffer, since the vehicle attitude is determined by the ballute, usually released at continuum conditions (hypersonic for an orbiter, and subsonic for a lander). Also, for a lander the range from entry to touchdown is less, offering a smaller footprint. The ballute derives an entry corridor for aerocapture by entering on a path that would lead to landing, and releasing the ballute adaptively, responding to measured deceleration, at a speed computed to achieve the desired orbiter exit conditions. For a lander an accurate landing point could be achieved by providing the lander with a small gliding capacity, using the large potential energy available from being subsonic at high altitude. Alternatively the ballute can be retained to act as a parachute or soft-landing device, or to float the payload as a buoyant aerobot. As expected, the ballute has smaller size for relatively small entry speeds, such as for Mars and Titan, or for the extensive atmosphere of a low-gravity planet such as Pluto. Details of a ballute to place a small Mars orbiter and a small Pluto lander will be given to illustrate the concept. The author will discuss presently available ballute materials and a development program of aerodynamic tests and materials that would be required for ballutes to achieve their full potential.

12 CFR 615.5450 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND OPERATIONS, AND FUNDING OPERATIONS Book-Entry Procedures for Farm Credit Securities § 615.5450... the claimant for another person to hold, transfer, or deal with the security. (b) Book-entry security means a Farm Credit security issued or maintained in the Book-entry System. (c) Book-entry System means...

78 FR 66803 - Fee Schedule for the Transfer of U.S. Treasury Book-Entry Securities Held on the National Book...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... Transfer of U.S. Treasury Book-Entry Securities Held on the National Book-Entry System AGENCY: Bureau of... (Treasury) is announcing a new fee schedule applicable to transfers of U.S. Treasury book-entry securities maintained on the National Book-Entry System (NBES) that occur on or after January 2, 2014. DATES: Effective...

Special education and later academic achievement.

PubMed

Ehrhardt, Jennifer; Huntington, Noelle; Molino, Janine; Barbaresi, William

2013-02-01

To determine whether grade at entry to special education is associated with improved reading achievement in children with reading disorders (RD) and whether the effect of grade at entry to special education differs by socioeconomic status (SES). The authors conducted a secondary data analysis using data from the Early Childhood Longitudinal Study-Kindergarten Cohort (ECLS-K), a nationally representative cohort of children followed longitudinally from kindergarten through eighth grade (1998-2007). Using data from the fifth grade wave of ECLS-K, the authors identified children with RD (n = 290). The outcome of interest was change in score on the reading achievement test, which was developed by ECLS-K staff, between first and fifth grade. Using multiple linear regression, the authors modeled outcome as a function of a child's grade at entry to special education, controlling for several covariates. Early entry to special education (by first grade vs second or third grade) was associated with larger gains in reading achievement between first and fifth grade (p < .0001). Children who entered special education by first grade versus second grade gained 4.5 more points on the reading achievement test (p < .0001). Children who entered special education by first grade versus third grade gained 1.7 more points on the reading achievement test (p < .0001). There was no difference in the magnitude of gains associated with early entry to special education between children from families of low and higher SES. For children with RD, early entry to special education is associated with improved reading achievement during elementary school.

Multicentre experience with the BridgePoint devices to facilitate recanalisation of chronic total coronary occlusions through controlled subintimal re-entry.

PubMed

Werner, Gerald S; Schofer, Joachim; Sievert, Horst; Kugler, Chad; Reifart, Nicolaus J

2011-06-01

The major challenge for the interventional treatment of chronic total coronary occlusion (CTO) is a low primary success rate. A common problem is the passage of the recanalisation wire into a subintimal position. New devices, which were evaluated in the first multicentre study in CTOs resistant to a conventional wire approach, may help to facilitate a controlled re-entry into the true lumen. The aim of this study was to assess the safety and efficacy of this approach, with successful true lumen distal wire passage as the primary endpoint. Forty-two patients were enrolled in four centres with high expertise in PCI for CTOs. All CTOs were of at least three months duration, and were initially attempted with dedicated recanalisation wires. After failure to pass or creation of a subintimal dissection, the BridgePoint devices were applied, consisting of a ball-tipped catheter (CrossBoss) to pass the proximal occlusion cap, and a flat-shaped balloon catheter (Stingray catheter) to be inflated within the subintimal space to guide the re-entry into the true vessel lumen with a special wire (Stingray guidewire). The primary endpoint was met in 67% of all patients. A higher success rate seemed to be possible when all devices were used in sequenced beginning with the CrossBoss, and in the case of a subintimal passage, followed by the Stingray. True lumen re-entry failed because of the loss of distally contrast filling and thus loss of a target for re-entry, and by a failure to advance the Stingray balloon far enough distal and parallel to the distal lumen. There were no severe device related complications. In patients with complex CTOs referred to dedicated centres with high experience in CTOs, these results demonstrate the potential of a guided re-entry from a subintimal wire position by use of the BridgePoint devices.

Window screening, ceilings and closed eaves as sustainable ways to control malaria in Dar es Salaam, Tanzania

PubMed Central

Ogoma, Sheila B; Kannady, Khadija; Sikulu, Maggy; Chaki, Prosper P; Govella, Nicodem J; Mukabana, Wolfgang R; Killeen, Gerry F

2009-01-01

Background Malaria transmission in Africa occurs predominantly inside houses where the primary vectors prefer to feed. Human preference and investment in blocking of specific entry points for mosquitoes into houses was evaluated and compared with known entry point preferences of the mosquitoes themselves. Methods Cross-sectional household surveys were conducted in urban Dar es Salaam, Tanzania to estimate usage levels of available options for house proofing against mosquito entry, namely window screens, ceilings and blocking of eaves. These surveys also enabled evaluation of household expenditure on screens and ceilings and the motivation behind their installation. Results Over three quarters (82.8%) of the 579 houses surveyed in Dar es Salaam had window screens, while almost half (48.9%) had ceilings. Prevention of mosquito entry was cited as a reason for installation of window screens and ceilings by 91.4% (394/431) and 55.7% (127/228) of respondents, respectively, but prevention of malaria was rarely cited (4.3%, 22/508). The median cost of window screens was between US $ 21-30 while that of ceilings was between US $301-400. The market value of insecticide-treated nets, window screening and ceilings currently in use in the city was estimated as 2, 5 and 42 million US$. More than three quarters of the respondents that lacked them said it was too expensive to install ceilings (82.2%) or window screens (75.5%). Conclusion High coverage and spending on screens and ceilings implies that these techniques are highly acceptable and excellent uptake can be achieved in urban settings like Dar es Salaam. Effective models for promotion and subsidization should be developed and evaluated, particularly for installation of ceilings that prevent entry via the eaves, which are the most important entry point for mosquitoes that cause malaria, a variety of neglected tropical diseases and the nuisance which motivates uptake. PMID:19785779

Window screening, ceilings and closed eaves as sustainable ways to control malaria in Dar es Salaam, Tanzania.

PubMed

Ogoma, Sheila B; Kannady, Khadija; Sikulu, Maggy; Chaki, Prosper P; Govella, Nicodem J; Mukabana, Wolfgang R; Killeen, Gerry F

2009-09-29

Malaria transmission in Africa occurs predominantly inside houses where the primary vectors prefer to feed. Human preference and investment in blocking of specific entry points for mosquitoes into houses was evaluated and compared with known entry point preferences of the mosquitoes themselves. Cross-sectional household surveys were conducted in urban Dar es Salaam, Tanzania to estimate usage levels of available options for house proofing against mosquito entry, namely window screens, ceilings and blocking of eaves. These surveys also enabled evaluation of household expenditure on screens and ceilings and the motivation behind their installation. Over three quarters (82.8%) of the 579 houses surveyed in Dar es Salaam had window screens, while almost half (48.9%) had ceilings. Prevention of mosquito entry was cited as a reason for installation of window screens and ceilings by 91.4% (394/431) and 55.7% (127/228) of respondents, respectively, but prevention of malaria was rarely cited (4.3%, 22/508). The median cost of window screens was between US $ 21-30 while that of ceilings was between US $301-400. The market value of insecticide-treated nets, window screening and ceilings currently in use in the city was estimated as 2, 5 and 42 million US$. More than three quarters of the respondents that lacked them said it was too expensive to install ceilings (82.2%) or window screens (75.5%). High coverage and spending on screens and ceilings implies that these techniques are highly acceptable and excellent uptake can be achieved in urban settings like Dar es Salaam. Effective models for promotion and subsidization should be developed and evaluated, particularly for installation of ceilings that prevent entry via the eaves, which are the most important entry point for mosquitoes that cause malaria, a variety of neglected tropical diseases and the nuisance which motivates uptake.

HSV-1 infection of human corneal epithelial cells: receptor-mediated entry and trends of re-infection.

PubMed

Shah, Arpeet; Farooq, Asim V; Tiwari, Vaibhav; Kim, Min-Jung; Shukla, Deepak

2010-11-20

The human cornea is a primary target for herpes simplex virus-1 (HSV-1) infection. The goals of the study were to determine the cellular modalities of HSV-1 entry into human corneal epithelial (HCE) cells. Specific features of the study included identifying major entry receptors, assessing pH dependency, and determining trends of re-infection. A recombinant HSV-1 virus expressing beta-galactosidase was used to ascertain HSV-1 entry into HCE cells. Viral replication within cells was confirmed using a time point plaque assay. Lysosomotropic agents were used to test for pH dependency of entry. Flow cytometry and immunocytochemistry were used to determine expression of three cellular receptors--nectin-1, herpesvirus entry mediator (HVEM), and paired immunoglobulin-like 2 receptor alpha (PILR-a). The necessity of these receptors for viral entry was tested using antibody-blocking. Finally, trends of re-infection were investigated using viral entry assay and flow cytometry post-primary infection. Cultured HCE cells showed high susceptibility to HSV-1 entry and replication. Entry was demonstrated to be pH dependent as blocking vesicular acidification decreased entry. Entry receptors expressed on the cell membrane include nectin-1, HVEM, and PILR-α. Receptor-specific antibodies blocked entry receptors, reduced viral entry and indicated nectin-1 as the primary receptor used for entry. Cells re-infected with HSV-1 showed a decrease in entry, which was correlated to decreased levels of nectin-1 as demonstrated by flow cytometry. HSV-1 is capable of developing an infection in HCE cells using a pH dependent entry process that involves primarily nectin-1 but also the HVEM and PILR-α receptors. Re-infected cells show decreased levels of entry, correlated with a decreased level of nectin-1 receptor expression.

31 CFR 356.4 - What are the book-entry systems in which auctioned Treasury securities may be issued or maintained?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false What are the book-entry systems in... BUREAU OF THE PUBLIC DEBT SALE AND ISSUE OF MARKETABLE BOOK-ENTRY TREASURY BILLS, NOTES, AND BONDS... book-entry systems in which auctioned Treasury securities may be issued or maintained? There are three...

12 CFR 615.5560 - Book-entry Procedure for Farm Credit System Financial Assistance Corporation Securities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OPERATIONS Farm Credit System Financial Assistance Corporation Securities § 615.5560 Book-entry Procedure for Farm Credit System Financial Assistance Corporation Securities. (a) The Farm Credit System Financial... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Book-entry Procedure for Farm Credit System...

78 FR 14290 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... Fitness File (June 11, 1997, 62 FR 31793). * * * * * Changes: System ID: Delete entry and replace with ``F036 AF A1 I.'' System Name: Delete entry and replace with ``Air Force Fitness Program.'' System location: Delete entry and replace with ``Air Force Fitness Management System (AFFMS) is located at Defense...

Overview of the Phoenix Entry, Descent and Landing System

NASA Technical Reports Server (NTRS)

Grover, Rob

2005-01-01

A viewgraph presentation on the entry, descent and landing system of Phoenix is shown. The topics include: 1) Phoenix Mission Goals; 2) Payload; 3) Aeroshell/Entry Comparison; 4) Entry Trajectory Comparison; 5) Phoenix EDL Timeline; 6) Hypersonic Phase; 7) Parachute Phase; 8) Terminal Descent Phase; and 9) EDL Communications.

CHOmine: an integrated data warehouse for CHO systems biology and modeling

PubMed Central

Hanscho, Michael; Ruckerbauer, David E.; Zanghellini, Jürgen; Borth, Nicole

2017-01-01

Abstract The last decade has seen a surge in published genome-scale information for Chinese hamster ovary (CHO) cells, which are the main production vehicles for therapeutic proteins. While a single access point is available at www.CHOgenome.org, the primary data is distributed over several databases at different institutions. Currently research is frequently hampered by a plethora of gene names and IDs that vary between published draft genomes and databases making systems biology analyses cumbersome and elaborate. Here we present CHOmine, an integrative data warehouse connecting data from various databases and links to other ones. Furthermore, we introduce CHOmodel, a web based resource that provides access to recently published CHO cell line specific metabolic reconstructions. Both resources allow to query CHO relevant data, find interconnections between different types of data and thus provides a simple, standardized entry point to the world of CHO systems biology. Database URL: http://www.chogenome.org PMID:28605771

Health systems: changes in hospital efficiency and profitability.

PubMed

Büchner, Vera Antonia; Hinz, Vera; Schreyögg, Jonas

2016-06-01

This study investigates potential changes in hospital performance after health system entry, while differentiating between hospital technical and cost efficiency and hospital profitability. In the first stage we obtained (bootstrapped) data envelopment analysis (DEA) efficiency scores. Then, genetic matching is used as a novel matching procedure in this context along with a difference-in-difference approach within a panel regression framework. With the genetic matching procedure, independent and health system hospitals are matched along a number of environmental and organizational characteristics. The results show that health system entry increases hospital technical and cost efficiency by between 0.6 and 3.4 % in four alternative post-entry periods, indicating that health system entry has not a transitory but rather a permanent effect on hospital efficiency. Regarding hospital profitability, the results reveal an increase in hospital profitability only 1 year after health system entry, and the estimations suggest that this effect is a transitional phenomenon. Overall, health system entry may serve as an appropriate management instrument for decision makers to increase hospital performance.

Obtaining orthotropic elasticity tensor using entries zeroing method.

NASA Astrophysics Data System (ADS)

Gierlach, Bartosz; Danek, Tomasz

2017-04-01

A generally anisotropic elasticity tensor obtained from measurements can be represented by a tensor belonging to one of eight material symmetry classes. Knowledge of symmetry class and orientation is helpful for describing physical properties of a medium. For each non-trivial symmetry class except isotropic this problem is nonlinear. A common method of obtaining effective tensor is a choosing its non-trivial symmetry class and minimizing Frobenius norm between measured and effective tensor in the same coordinate system. Global optimization algorithm has to be used to determine the best rotation of a tensor. In this contribution, we propose a new approach to obtain optimal tensor, with the assumption that it is orthotropic (or at least has a similar shape to the orthotropic one). In orthotropic form tensor 24 out of 36 entries are zeros. The idea is to minimize the sum of squared entries which are supposed to be equal to zero through rotation calculated with optimization algorithm - in this case Particle Swarm Optimization (PSO) algorithm. Quaternions were used to parametrize rotations in 3D space to improve computational efficiency. In order to avoid a choice of local minima we apply PSO several times and only if we obtain similar results for the third time we consider it as a correct value and finish computations. To analyze obtained results Monte-Carlo method was used. After thousands of single runs of PSO optimization, we obtained values of quaternion parts and plot them. Points concentrate in several points of the graph following the regular pattern. It suggests the existence of more complex symmetry in the analyzed tensor. Then thousands of realizations of generally anisotropic tensor were generated - each tensor entry was replaced with a random value drawn from normal distribution having a mean equal to measured tensor entry and standard deviation of the measurement. Each of these tensors was subject of PSO based optimization delivering quaternion for optimal rotation. Computations were parallelized with OpenMP to decrease computational time what enables different tensors to be processed by different threads. As a result the distributions of rotated tensor entries values were obtained. For the entries which were to be zeroed we can observe almost normal distributions having mean equal to zero or sum of two normal distributions having inverse means. Non-zero entries represent different distributions with two or three maxima. Analysis of obtained results shows that described method produces consistent values of quaternions used to rotate tensors. Despite of less complex target function in a process of optimization in comparison to common approach, entries zeroing method provides results which can be applied to obtain an orthotropic tensor with good reliability. Modification of the method can produce also a tool for obtaining effective tensors belonging to another symmetry classes. This research was supported by the Polish National Science Center under contract No. DEC-2013/11/B/ST10/0472.

Firm- and drug-specific patterns of generic drug payments by US medicaid programs: 1991-2008.

PubMed

Kelton, Christina M L; Chang, Lenisa V; Guo, Jeff J; Yu, Yan; Berry, Edmund A; Bian, Boyang; Heaton, Pamela C

2014-04-01

The entry of generic drugs into markets previously monopolized by patented, branded drugs often represents large potential savings for healthcare payers in the USA. Our objectives were to describe and explain the trends in drug reimbursement by public Medicaid programmes post-generic entry for as many drug markets and for as long a time period as possible. The data were the Medicaid State Drug Utilization Data maintained by the Centers for Medicare and Medicaid Services. Quarterly utilization and expenditure data from 1991 to 2008 were extracted for 83 drugs, produced by 229 firms, that experienced initial generic entry between 1992 and 2004. A relative 'price' for a specific drug, firm and quarter was constructed as Medicaid reimbursement per unit (e.g. tablet, capsule or vial) divided by average reimbursement per unit for the branded drug the year before entry. Fixed-effects models controlling for time-, firm- and drug-specific differences were estimated to explain reimbursement. Twelve quarters after generic entry, 18 % of drugs had average per-unit reimbursement less than 50 % of the original branded-drug reimbursement. For each additional firm manufacturing the drug, reimbursement per unit, relative to the pre-generic-entry branded-drug reimbursement, was estimated to fall by 17 (p < 0.01) and 3 (p < 0.01) percentage points for generic and branded-drug companies, respectively. Each additional quarter post-generic entry brought a 2 (p < 0.01) percentage point drop in relative reimbursement. State Medicaid programmes generally have been able to obtain relief from high drug prices following patent expirations for many branded-drug medications by adjusting reimbursement following the expanded competition in the pharmaceutical market.

Atmospheric Entry Studies for Venus Missions: 45 Sphere-Cone Rigid Aeroshells and Ballistic Entries

NASA Technical Reports Server (NTRS)

Prabhu, Dinesh K.; Spilker, Thomas R.; Allen, Gary A., Jr.; Hwang, Helen H.; Cappuccio, Gelsomina; Moses, Robert W.

2013-01-01

The present study considers direct ballistic entries into the atmosphere of Venus using a 45deg sphere-cone rigid aeroshell, a legacy shape that has been used successfully in the past in the Pioneer Venus Multiprobe Mission. For a number of entry mass and heatshield diameter combinations (i.e., various ballistic coefficients) and entry velocities, the trajectory space in terms of entry flight path angles between skip out and -30deg is explored with a 3DoF trajectory code, TRAJ. From these trajectories, the viable entry flight path angle space is determined through the use of mechanical and thermal performance limits on the thermal protection material and science payload; the thermal protection material of choice is entry-grade carbon phenolic, for which a material thermal response model is available. For mechanical performance, a 200 g limit is placed on the peak deceleration load experienced by the science instruments, and 10 bar is assumed as the pressure limit for entry-grade carbon-phenolic material. For thermal performance, inflection points in the total heat load distribution are used as cut off criteria. Analysis of the results shows the existence of a range of critical ballistic coefficients beyond which the steepest possible entries are determined by the pressure limit of the material rather than the deceleration load limit.

CrossTalk. The Journal of Defense Software Engineering. Volume 25, Number 2

DTIC Science & Technology

2012-04-01

attacks is expanding to engulf the compact world of smartphones . by Aditya K. Sood and Richard J. Enbody A Practical Approach to Securing and Managing...provide a vulnerable entry point to our mobile device informa- tion systems. As a result, hackers are able to quickly exploit software on smartphones ...MOBILE WORLD 4 CrossTalk—March/April 2012 Abstract. The sphere of malware attacks is expanding to engulf the compact world of smartphones . This paper

Special Inspector General for Iraq Reconstruction (SIGIR): The Year of Transition in Review

DTIC Science & Technology

2007-01-30

border forts have been constructed thus far, and 5 points of entry have been completed.315 SIGIR’s ground project surveys inspected 21 border forts and...Gen. Dempsey recently estimated that 20-25% of the National Police “needed to be weeded out.”367 Finally, recent surveys suggest that public...Transportation and Communications system, 33 site surveys have been completed for the communication towers between Mosul and Basrah.409 Phase II

7 CFR 319.37 - Prohibitions and restrictions on importation; disposal of articles refused importation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of articles refused importation. (a) No person shall import or offer for entry into the United States... person shall import or offer for entry into the United States any restricted article except in accordance... Form 523), destroy, ship to a point outside the United States, or apply treatments or other safeguards...

7 CFR 319.37 - Prohibitions and restrictions on importation; disposal of articles refused importation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... articles refused importation. (a) No person shall import or offer for entry into the United States any... import or offer for entry into the United States any restricted article except in accordance with this...), destroy, ship to a point outside the United States, or apply treatments or other safeguards to the article...

7 CFR 319.37 - Prohibitions and restrictions on importation; disposal of articles refused importation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... articles refused importation. (a) No person shall import or offer for entry into the United States any... import or offer for entry into the United States any restricted article except in accordance with this...), destroy, ship to a point outside the United States, or apply treatments or other safeguards to the article...

15 CFR Supplement No. 7 to Part 760 - Interpretation

Code of Federal Regulations, 2011 CFR

2011-01-01

... inventory or may re-ship them to other markets (the United States person may not return them to the original... Department wishes to point out that, when faced with a boycotting country's refusal to permit entry of the... or origin at the time of their entry into the boycotting country by (a) uniqueness of design or...

15 CFR Supplement No. 7 to Part 760 - Interpretation

Code of Federal Regulations, 2012 CFR

2012-01-01

... inventory or may re-ship them to other markets (the United States person may not return them to the original... Department wishes to point out that, when faced with a boycotting country's refusal to permit entry of the... or origin at the time of their entry into the boycotting country by (a) uniqueness of design or...

15 CFR Supplement No. 7 to Part 760 - Interpretation

Code of Federal Regulations, 2010 CFR

2010-01-01

... inventory or may re-ship them to other markets (the United States person may not return them to the original... Department wishes to point out that, when faced with a boycotting country's refusal to permit entry of the... or origin at the time of their entry into the boycotting country by (a) uniqueness of design or...

15 CFR Supplement No. 7 to Part 760 - Interpretation

Code of Federal Regulations, 2013 CFR

2013-01-01

... inventory or may re-ship them to other markets (the United States person may not return them to the original... Department wishes to point out that, when faced with a boycotting country's refusal to permit entry of the... or origin at the time of their entry into the boycotting country by (a) uniqueness of design or...

76 FR 54788 - Notice of Permanent Closure of Public Lands in Clackamas and Multnomah Counties, OR

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

..., State, and local government permittees and contractors conducting authorized activities; members of.... The BLM will post closure signs at main entry points to this area and take steps to install physical barriers at the BRWMU boundary. The affected lands will be represented as closed to public entry in maps...

78 FR 9866 - Special Local Regulation; Moss Point Rockin' the Riverfront Festival; Robertson Lake & O'Leary...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... 1625-AA08 Special Local Regulation; Moss Point Rockin' the Riverfront Festival; Robertson Lake & O... Riverfront Festival high speed boat races. Entry into, transiting or anchoring in this area is prohibited to... Point Rockin' the Riverfront Festival; Robertson Lake & O'Leary Lake; Moss Point, MS. (a) Location. The...

Space Debris Alert System for Aviation

NASA Astrophysics Data System (ADS)

Sgobba, Tommaso

2013-09-01

Despite increasing efforts to accurately predict space debris re-entry, the exact time and location of re-entry is still very uncertain. Partially, this is due to a skipping effect uncontrolled spacecraft may experience as they enter the atmosphere at a shallow angle. Such effect difficult to model depends on atmospheric variations of density. When the bouncing off ends and atmospheric re-entry starts, the trajectory and the overall location of surviving fragments can be precisely predicted but the time to impact with ground, or to reach the airspace, becomes very short.Different is the case of a functional space system performing controlled re-entry. Suitable forecasts methods are available to clear air and maritime traffic from hazard areas (so-called traffic segregation).In US, following the Space Shuttle Columbia accident in 2003, a re-entry hazard areas location forecast system was putted in place for the specific case of major malfunction of a Reusable Launch Vehicles (RLV) at re-entry. The Shuttle Hazard Area to Aircraft Calculator (SHAAC) is a system based on ground equipment and software analyses and prediction tools, which require trained personnel and close coordination between the organization responsible for RLV operation (NASA for Shuttle) and the Federal Aviation Administration. The system very much relies on the operator's capability to determine that a major malfunction has occurred.This paper presents a US pending patent by the European Space Agency, which consists of a "smart fragment" using a GPS localizer together with pre- computed debris footprint area and direct broadcasting of such hazard areas.The risk for aviation from falling debris is very remote but catastrophic. Suspending flight over vast swath of airspace for every re-entering spacecraft or rocket upper stage, which is a weekly occurrence, would be extremely costly and disruptive.The Re-entry Direct Broadcasting Alert System (R- DBAS) is an original merging and evolution of the Re- entry Breakup Recorder (REBR) concept developed by The Aerospace Corporation, often called the black box of spacecraft, and of the Shuttle Hazard Area to Aircraft Calculator (SHAAC). Unlike the REBR, whichdownloads data via satellite link for later analysis, the R-DBAS is intended as a direct communication tool with the end user. As a spacecraft carrying R-DBAS re- enters into the atmosphere, it relays a message with the coordinates of the falling debris footprint area to anyone with a receiver and a display like laptop or iPad, warning them of the hazard.Much like the REBR, the R-DBAS is designed to release from its host vehicle when it experiences significant heat which melts the attachment point and closes the power circuit. Once activated, the R-DBAS determines its own location and computes the final coordinates of the preloaded debris footprint which is then broadcasted to anyone holding a receiver in the proximity of the hazard area.The R-DBAS is intended to provide precise information directly to the cockpit. An airplane would have about 5- 7 minutes to get out of the way. Being the hazard area 1,000-2000 km long but very narrow, 30 -70 km, an escape manoeuvre from the risky area can be readily performed or go on holding before crossing the hazard area.By equipping aircraft and other vulnerable systems with a simple receivers that can be attached to a common laptop, escape manoeuvres can be performed as in front of bad weather or shelter can be taken by people on ground.

Conformal Ablative Thermal Protection System for Planetary and Human Exploration Missions: Overview of the Technology Maturation Efforts Funded by NASA's Game Changing Development Program

NASA Technical Reports Server (NTRS)

Beck, Robin A.; Arnold, James O.; Gasch, Matthew J.; Stackpoole, Margaret M.; Fan, Wendy; Szalai, Christine E.; Wercinski, Paul F.; Venkatapathy, Ethiraj

2012-01-01

The Office of Chief Technologist (OCT), NASA has identified the need for research and technology development in part from NASA's Strategic Goal 3.3 of the NASA Strategic Plan to develop and demonstrate the critical technologies that will make NASA's exploration, science, and discovery missions more affordable and more capable. Furthermore, the Game Changing Development Program (GCDP) is a primary avenue to achieve the Agency's 2011 strategic goal to "Create the innovative new space technologies for our exploration, science, and economic future." In addition, recently released "NASA space Technology Roadmaps and Priorities," by the National Research Council (NRC) of the National Academy of Sciences stresses the need for NASA to invest in the very near term in specific EDL technologies. The report points out the following challenges (Page 2-38 of the pre-publication copy released on February 1, 2012): Mass to Surface: Develop the ability to deliver more payload to the destination. NASA's future missions will require ever-greater mass delivery capability in order to place scientifically significant instrument packages on distant bodies of interest, to facilitate sample returns from bodies of interest, and to enable human exploration of planets such as Mars. As the maximum mass that can be delivered to an entry interface is fixed for a given launch system and trajectory design, the mass delivered to the surface will require reduction in spacecraft structural mass; more efficient, lighter thermal protection systems; more efficient lighter propulsion systems; and lighter, more efficient deceleration systems. Surface Access: Increase the ability to land at a variety of planetary locales and at a variety of times. Access to specific sites can be achieved via landing at a specific location (s) or transit from a single designated landing location, but it is currently infeasible to transit long distances and through extremely rugged terrain, requiring landing close to the site of interest. The entry environment is not always guaranteed with a direct entry, and improving the entry system's robustness to a variety of environmental conditions could aid in reaching more varied landing sites."

Policies and interventions on employment relations and health inequalities.

PubMed

Quinlan, Michael; Muntaner, Carles; Solar, Orielle; Vergara, Montserrat; Eijkemans, Gerry; Santana, Vilma; Chung, Haejoo; Castedo, Antía; Benach, Joan

2010-01-01

The association between certain increasingly pervasive employment conditions and serious health inequalities presents a significant policy challenge. A critical starting point is the recognition that these problems have not arisen in a policy vacuum. Rather, policy frameworks implemented by governments over the past 35 years, in conjunction with corporate globalization (itself facilitated by neoliberal policies), have undermined preexisting social protection policies and encouraged the growth of health-damaging forms of work organization. After a brief description of the context in which recent developments should be viewed, this article describes how policies can be reconfigured to address health-damaging employment conditions. A number of key policy objectives and entry points are identified, with a summary of policies for each entry point, relating to particular employment conditions relevant to rich and poor countries. Rather than trying to elaborate these policy interventions in detail, the authors point to several critical issues in relation to these interventions, linking these to illustrative examples.

Shuttle launched flight tests - Supporting technology for planetary entry missions

NASA Technical Reports Server (NTRS)

Vetter, H. C.; Mcneilly, W. R.; Siemers, P. M., III; Nachtsheim, P. R.

1975-01-01

The feasibility of conducting Space Shuttle-launched earth entry flight tests to enhance the technology base for second generation planetary entry missions is examined. Outer planet entry environments are reviewed, translated into earth entry requirements and used to establish entry test system design and cost characteristics. Entry speeds up to those needed to simulate radiative heating levels of more than 30 kW/sq cm are shown to be possible. A standardized recoverable test bed concept is described that is capable of accommodating a wide range of entry technology experiments. The economic advantage of shared Shuttle launches are shown to be achievable through a test system configured to the volume constraints of a single Spacelab pallet using existing propulsion components.

Toxicological database of soil and derived products (BDT).

PubMed

Uricchio, Vito Felice

2008-01-01

The Toxicological database of soil and derived products is a project firstly proposed by the Regional Environmental Authority of Apulia. Such a project aims to provide comprehensive and updated information on the regional environmental characteristics, on the pollution state of the regional soil, on the main pollutants and on the reclaim techniques to be used in case of both non-point (agricultural activities) and point (industrial activities) sources of pollution. The project's focus is on the soil pollution because of the fundamental role played by the soil in supporting the biological cycle. Furthermore, the reasons for the project are related both to the reduction of human health risks due to toxic substances ingestion (these substances are present in some ring of the eating chain), and to the recognition of the importance of the groundwater quality safety (primary source of fresh water in many Mediterranean Regions). The essential requirements of a data entry are the following: speed and simplicity of the data entry; reliability and stability of the database structures; speed, easiness and pliability of the queries. Free consultation of the database represents one of the most remarkable advantages coming from the use of an "open" system.

Genetic Thinking in the Study of Social Relationships: Five Points of Entry.

PubMed

Reiss, David

2010-09-01

For nearly a generation, researchers studying human behavioral development have combined genetically informed research designs with careful measures of social relationships such as parenting, sibling relationships, peer relationships, marital processes, social class stratifications, and patterns of social engagement in the elderly. In what way have these genetically informed studies altered the construction and testing of social theories of human development? We consider five points of entry where genetic thinking is taking hold. First, genetic findings suggest an alternative scenario for explaining social data. Associations between measures of the social environment and human development may be due to genes that influence both. Second, genetic studies add to other prompts to study the early developmental origins of current social phenomena in midlife and beyond. Third, genetic analyses promise to shed light on understudied social systems, such as sibling relationships, that have an impact on human development independent of genotype. Fourth, genetic analyses anchor in neurobiology individual differences in resilience and sensitivity to both adverse and favorable social environments. Finally, genetic analyses increase the utility of laboratory simulations of human social processes and of animal models. © The Author(s) 2010.

Modified Posterior C1 Lateral Mass Screw Insertion for Type II Odontoid Process Fractures Using Intraoperative Computed Tomography-Based Spinal Navigation to Minimize Postoperative Occipital Neuralgia.

PubMed

Ishak, Basem; Schneider, Till; Tubbs, R Shane; Gimmy, Valerie; Younsi, Alexander; Unterberg, Andreas W; Kiening, Karl L

2017-11-01

Various surgical techniques have been described for treating odontoid instability and achieving effective stabilization. The earliest technique to be described proposed a C1 lateral mass entry point including neurectomy of the C2 nerve roots to ensure hemostasis. Because C2 neurectomy remains controversial, preservation of the C2 nerve root as described in Goel-Harms technique can lead to intractable occipital neuralgia and significant blood loss. The aim of this study was to modify the Goel-Harms technique with a high C1 lateral mass screw entry point to enhance overall intraoperative safety. Sixty-three patients (average age, 70 ± 16 years) with acute traumatic odontoid fracture type II underwent posterior stabilization with a modified posterior C1 lateral mass entry point using intraoperative computed tomography (CT)-guided spinal navigation. Complications were recorded, especially bleeding from the epidural venous plexus and development of occipital neuralgia. All patients were followed up for a minimum of 6 months. None of the patients developed occipital neuralgia or numbness. Blood transfusion was necessary in 1 patient because of a coagulation disorder. There was no bleeding from the epidural venous plexus. All screws were correctly placed. Two patients needed surgical revision (wound infection, dural tear). Two developed cardiopulmonary complications. Solid bony fusion was achieved in all patients. This study confirms that changing the C1 entry point to the junction of the posterior arch and superior-posterior part of the C1 lateral mass by using intraoperative CT navigation yields a safe and effective procedure with few complications. The overall complication rate was 6%. Copyright © 2017 Elsevier Inc. All rights reserved.

Simultaneous Tracking of Multiple Points Using a Wiimote

NASA Astrophysics Data System (ADS)

Skeffington, Alex; Scully, Kyle

2012-11-01

This paper reviews the construction of an inexpensive motion tracking and data logging system, which can be used for a wide variety of teaching experiments ranging from entry-level physics courses to advanced courses. The system utilizes an affordable infrared camera found in a Nintendo Wiimote to track IR LEDs mounted to the objects to be tracked. Two quick experiments are presented using the motion tracking system to demonstrate the diversity of tasks this system can handle. The first experiment uses the Wiimote to record the harmonic motion of oscillating masses on a near-frictionless surface, while the second experiment uses the Wiimote as part of a feedback mechanism in a rotational system. The construction, capabilities, demonstrations, and suggested improvements of the system are reported here.

Structure of unliganded HSV gD reveals a mechanism for receptor-mediated activation of virus entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krummenacher, Claude; Supekar, Vinit M.; Whitbeck, J. Charles

2010-07-19

Herpes simplex virus (HSV) entry into cells requires binding of the envelope glycoprotein D (gD) to one of several cell surface receptors. The 50 C-terminal residues of the gD ectodomain are essential for virus entry, but not for receptor binding. We have determined the structure of an unliganded gD molecule that includes these C-terminal residues. The structure reveals that the C-terminus is anchored near the N-terminal region and masks receptor-binding sites. Locking the C-terminus in the position observed in the crystals by an intramolecular disulfide bond abolished receptor binding and virus entry, demonstrating that this region of gD moves uponmore » receptor binding. Similarly, a point mutant that would destabilize the C-terminus structure was nonfunctional for entry, despite increased affinity for receptors. We propose that a controlled displacement of the gD C-terminus upon receptor binding is an essential feature of HSV entry, ensuring the timely activation of membrane fusion.« less

Application of the FADS system on the Re-entry Module

NASA Astrophysics Data System (ADS)

Zhen, Huang

2016-07-01

The aerodynamic model for Flush Air Data Sensing System (FADS) is built based on the surface pressure distribution obtained through the pressure orifices laid on specific positions of the surface,and the flight parameters,such as angle of attack,angle of side-slip,Mach number,free-stream static pressure and dynamic pressure are inferred from the aerodynamic model.The flush air data sensing system (FADS) has been used on several flight tests of aircraft and re-entry vehicle,such as,X-15,space shuttle,F-14,X-33,X-43A and so on. This paper discusses the application of the FADS on the re-entry module with blunt body to obtain high-precision aerodynamic parameters.First of all,a basic theory and operating principle of the FADS is shown.Then,the applications of the FADS on typical aircrafts and re-entry vehicles are described.Thirdly,the application mode on the re-entry module with blunt body is discussed in detail,including aerodynamic simulation,pressure distribution,trajectory reconstruction and the hardware shoule be used,such as flush air data sensing system(FADS),inertial navigation system (INS),data acquisition system,data storage system.Finally,ablunt module re-entry flight test from low earth orbit (LEO) is planned to obtain aerodynamic parameters and amend the aerodynamic model with this FADS system data.The results show that FADS system can be applied widely in re-entry module with blunt bodies.

31 CFR 356.4 - What are the book-entry systems in which auctioned Treasury securities may be issued?

Code of Federal Regulations, 2010 CFR

2010-07-01

... in which auctioned Treasury securities may be issued? There are three book-entry securities systems... marketable Treasury securities. We maintain and transfer securities in these three book-entry systems at... inflation. Securities may be transferred from one system to the other, unless the securities are not...

18 CFR 1314.2 - Definition of terms.

Code of Federal Regulations, 2010 CFR

2010-04-01

... PROCEDURES FOR TVA POWER SECURITIES ISSUED THROUGH THE FEDERAL RESERVE BANKS § 1314.2 Definition of terms... applicable. (a) Book-entry System means the automated book-entry system operated by the Reserve Banks acting... issued or maintained in the Book-entry System of the Reserve Banks. (c) CUSIP Number is a unique...

49 CFR 172.315 - Packages containing limited quantities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... applicable, for the entry as shown in the § 172.101 Table, and placed within a square-on-point border in... to the package as to be readily visible. The width of line forming the square-on-point must be at... square-on-points bearing a single ID number, or a single square-on-point large enough to include each...

An assessment of the impact of transition on advanced winged entry vehicle thermal protection system mass

NASA Technical Reports Server (NTRS)

Wurster, K. E.

1981-01-01

This study examines the impact of turbulent heating on thermal protection system (TPS) mass for advanced winged entry vehicles. Four basic systems are considered: insulative, metallic hot structures, metallic standoff, and hybrid systems. TPS sizings are performed using entry trajectories tailored specifically to the characteristics of each TPS concept under consideration. Comparisons are made between systems previously sized under the assumption of all laminar heating and those sized using a baseline estimate of transition and turbulent heating. The relative effect of different transition criteria on TPS mass requirements is also examined. Also investigated are entry trajectories tailored to alleviate turbulent heating. Results indicate the significant impact of turbulent heating on TPS mass and demonstrate the importance of both accurate transition criteria and entry trajectory tailoring.

Ames Infusion Stories for NASA Annual Technology Report: Nano Entry System for CubeSat-Class Payloads

NASA Technical Reports Server (NTRS)

Smith, Brandon; Jan, Darrell Leslie; Venkatapathy, Etiraj

2015-01-01

The Nano Entry System for CubeSat-Class Payloads led to the development of the Nano-Adaptable Deployable Entry and Placement Technology ("Nano-ADEPT"). Nano-ADEPT is a mechanically deployed entry, descent, and landing (EDL) system that stows during launch and cruise (like an umbrella) and serves as both heat shield and primary structure during EDL. It is especially designed for small spacecraft where volume is a limiting constraint.

Expanding the "Ports of Entry" for Speech-Language Pathologists: A Relational and Reflective Model for Clinical Practice

ERIC Educational Resources Information Center

Geller, Elaine; Foley, Gilbert M.

2009-01-01

Purpose: To outline an expanded framework for clinical practice in speech-language pathology. This framework broadens the focus on discipline-specific knowledge and infuses mental health constructs within the study of communication sciences and disorders, with the objective of expanding the potential "ports or points of entry" (D. Stern, 1995) for…

Boys' and Girls' Weight Status and Math Performance from Kindergarten Entry through Fifth Grade: A Mediated Analysis

ERIC Educational Resources Information Center

Gable, Sara; Krull, Jennifer L.; Chang, Yiting

2012-01-01

This study tests a mediated model of boys' and girls' weight status and math performance with 6,250 children from the Early Childhood Longitudinal Study. Five data points spanning kindergarten entry (mean age = 68.46 months) through fifth grade (mean age = 134.60 months) were analyzed. Three weight status groups were identified: persistent…

Experiences with HIV Testing, Entry, and Engagement in Care by HIV-Infected Women of Color, and the Need for Autonomy, Competency, and Relatedness

PubMed Central

Messer, Lynne C.; Adimora, Adaora A.; Roytburd, Katya; Bowditch, Natasha; Parnell, Heather; Seay, Julia; Bell, Lynda; Pierce, Jonah K.

2013-01-01

Abstract Self-determination theory examines the needs of people adopting new behaviors but has not been applied to the adoption of HIV healthcare behaviors. The current study applied self-determination theory to descriptions of healthcare behaviors adopted by ethnic minority women after an HIV diagnosis. Women of color were asked to describe their experiences with HIV testing, entry, and engagement-in-care in qualitative interviews and focus groups. Participants were mostly African-American (88%), over 40 years old (70%), had been diagnosed for more than 6 years (87%) and had disclosed their HIV infection to more than 3 people (73%). Women described unmet self-determination needs at different time points along the HIV Continuum of Care. Women experienced a significant loss of autonomy at the time of HIV diagnosis. Meeting competency and relatedness needs assisted women in entry and engagement-in-care. However, re-establishing autonomy was a key element for long-term engagement-in-care. Interventions that satisfy these needs at the optimal time point in care could improve diagnosis, entry-to-care, and retention-in-care for women living with HIV. PMID:23829331

Experiences with HIV testing, entry, and engagement in care by HIV-infected women of color, and the need for autonomy, competency, and relatedness.

PubMed

Quinlivan, E Byrd; Messer, Lynne C; Adimora, Adaora A; Roytburd, Katya; Bowditch, Natasha; Parnell, Heather; Seay, Julia; Bell, Lynda; Pierce, Jonah K

2013-07-01

Self-determination theory examines the needs of people adopting new behaviors but has not been applied to the adoption of HIV healthcare behaviors. The current study applied self-determination theory to descriptions of healthcare behaviors adopted by ethnic minority women after an HIV diagnosis. Women of color were asked to describe their experiences with HIV testing, entry, and engagement-in-care in qualitative interviews and focus groups. Participants were mostly African-American (88%), over 40 years old (70%), had been diagnosed for more than 6 years (87%) and had disclosed their HIV infection to more than 3 people (73%). Women described unmet self-determination needs at different time points along the HIV Continuum of Care. Women experienced a significant loss of autonomy at the time of HIV diagnosis. Meeting competency and relatedness needs assisted women in entry and engagement-in-care. However, re-establishing autonomy was a key element for long-term engagement-in-care. Interventions that satisfy these needs at the optimal time point in care could improve diagnosis, entry-to-care, and retention-in-care for women living with HIV.

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

NASA Astrophysics Data System (ADS)

Wu, Chao; Yang, Jun; Li, Shihua; Li, Qi; Guo, Lei

2018-05-01

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8 km parachute deployment point distribution error) than the baseline control scheme (8.4 km) and integral control scheme (5.8 km).

78 FR 23843 - Special Local Regulations; Moss Point Rockin' the Riverfront Festival; Robertson Lake & O'Leary...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

...-AA08 Special Local Regulations; Moss Point Rockin' the Riverfront Festival; Robertson Lake & O'Leary... Festival high speed boat races. Entry into, transiting or anchoring in this area is prohibited to all... Rockin' the Riverfront Festival; Robertson Lake & O'Leary Lake; Moss Point, MS. (a) Location. The...

A Wild Weasel Penetration Model.

DTIC Science & Technology

1982-03-01

event 13, and node WM. Global variable XX(48) counts the WWs as they reach the home point. The network logic for WWI and WW2 is identical. Each WW...the same no matter if the aircraft is WWI or WW2 . Radar-Attack Profile In the radar-attack po. tion of the network threat radars engage both attack...Systems Dispersion on LOC XX(52) *State Variable--see text. * 94 variable. (The entry positions of WW1 and WW2 are changed with state variables SS(25) and

Physiologically constrained aerocapture for manned Mars missions

NASA Technical Reports Server (NTRS)

Lyne, James Evans

1992-01-01

Aerobraking has been proposed as a critical technology for manned missions to Mars. The variety of mission architectures currently under consideration presents aerobrake designers with an enormous range of potential entry scenarios. Two of the most important considerations in the design of an aerobrake are the required control authority (lift-to-drag ratio) and the aerothermal environment which the vehicle will encounter. Therefore, this study examined the entry corridor width and stagnation-point heating rate and load for the entire range of probable entry velocities, lift-to-drag ratios, and ballistic coefficients for capture at both Earth and Mars. To accomplish this, a peak deceleration limit for the aerocapture maneuvers had to be established. Previous studies had used a variety of load limits without adequate proof of their validity. Existing physiological and space flight data were examined, and it was concluded that a deceleration limit of 5 G was appropriate. When this load limit was applied, numerical studies showed that an aerobrake with an L/D of 0.3 could provide an entry corridor width of at least 1 degree for all Mars aerocaptures considered with entry velocities up to 9 km/s. If 10 km/s entries are required, an L/D of 0.4 to 0.5 would be necessary to maintain a corridor width of at least 1 degree. For Earth return aerocapture, a vehicle with an L/D of 0.4 to 0.5 was found to provide a corridor width of 0.7 degree or more for all entry velocities up to 14.5 km/s. Aerodynamic convective heating calculations were performed assuming a fully catalytic, 'cold' wall; radiative heating was calculated assuming that the shock layer was in thermochemical equilibrium. Heating rates were low enough for selected entries at Mars that a radiatively cooled thermal protection system might be feasible, although an ablative material would be required for most scenarios. Earth return heating rates were generally more severe than those encountered by the Apollo vehicles, and would require ablative heat shields in all cases.

Enabling Venus In-Situ Science - Deployable Entry System Technology, Adaptive Deployable Entry and Placement Technology (ADEPT): A Technology Development Project funded by Game Changing Development Program of the Space Technology Program

NASA Technical Reports Server (NTRS)

Wercinski, Paul F.; Venkatapathy, Ethiraj; Gage, Peter J.; Yount, Bryan C.; Prabhu, Dinesh K.; Smith, Brandon; Arnold, James O.; Makino, alberto; Peterson, Keith Hoppe; Chinnapongse, Ronald I.

2012-01-01

Venus is one of the important planetary destinations for scientific exploration, but: The combination of extreme entry environment coupled with extreme surface conditions have made mission planning and proposal efforts very challenging. We present an alternate, game-changing approach (ADEPT) where a novel entry system architecture enables more benign entry conditions and this allows for greater flexibility and lower risk in mission design

Experimental early pathogenesis of Streptococcus agalactiae infection in red tilapia Oreochromis spp.

PubMed

Iregui, C A; Comas, J; Vásquez, G M; Verján, N

2016-02-01

Streptococcus agalactiae causes a severe systemic disease in fish, and the routes of entry are still ill-defined. To address this issue, two groups of 33 red tilapia Oreochromis spp. each of 10 g were orally infected with S. agalactiae (n = 30), and by immersion (n = 30), six individuals were control-uninfected fish. Three tilapias were killed at each time point from 30 min to 96 h post-inoculation (pi); controls were killed at 96 h. Samples from most tissues were examined by haematoxylin-eosin (H&E), indirect immunoperoxidase (IPI) and periodic acid-Schiff; only intestine from fish infected by gavage was evaluated by transmission electron microscopy. The results of both experiments suggest that the main entry site of S. agalactiae in tilapia is the gastrointestinal epithelium; mucus seems to play an important defensive role, and environmental conditions may be an important predisposing factor for the infection. © 2015 John Wiley & Sons Ltd.

[Radiobiological effects of total mice irradiation with Bragg's peak protons].

PubMed

Ivanov, A A; Molokanov, A G; Ushakov, I B; Bulynina, T M; Vorozhtsova, S V; Abrosimova, A N; Kryuchkova, D M; Gaevsky, V N

2013-01-01

Outbred CD-1 female mice were irradiated in a proton beam (171 MeV, 5 Gy) on the phasotron at the Joint Institute of Nuclear Research (Dubna, Russia). Radiation was delivered in two points of the depth dose distribution: at the beam entry and on Bragg's peak. Technical requirements for studying the effects of Bragg's peak protons on organism of experimental animals were specified. It was recognized that protons with high linear energy transfer (mean LET = 1.6 keV/microm) cause a more severe damaging effect to the hemopoietic system and cytogenetic apparatus in bone marrow cells as compared with entry protons and 60Co gamma-quanta. It was shown that recovery of the main hemopoietic organs and immunity as well as elimination of chromosomal aberrations take more time following irradiation with Bragg's peak protons but not protons with the energy of 171 MeV.

Entry trajectory, entry environment, and analysis of spacecraft motion for the RAM C-3 flight experiment

NASA Technical Reports Server (NTRS)

Weaver, W. L.; Bowen, J. T.

1972-01-01

The RAM C-3 flight experiment was launched to study the problem of radiofrequency blackout at an entry velocity of 24,300 ft/sec. The flight is described, and data for the entry trajectory and environment, which include the effects of actual temperature measured the day of launch, are presented. An analysis of entry spacecraft motions was performed. This analysis included the determination of wind angles from measured accelerations and estimates of wind angles at high altitudes from gyro-measured rotation rates. The maximum wind angles were found to be less than 5 deg to the point of pitch-roll resonance where the total wind angle increased to 8.5 deg and the roll rate started decreasing. A plausible cause for the decrease in roll rate was shown to be a combination of trim angle and an offset center of gravity.

A new rule for femoral nerve blocks.

PubMed

Schulz-Stübner, Sebastian; Henszel, Angela; Hata, J Steven

2005-01-01

Acupuncture points are described by use of a proportional system that is based on the width of the thumb at the level of the distal interphalangeal joint, defined as 1 CUN. Our study tested first the correlation between the CUN and weight and height in 500 Americans and second the hypothesis that the CUN system is superior to the conventional landmarks to localize the femoral nerve 1 or 2 cm lateral to the artery in a prospective, double-blinded, randomized study. Sixty-two patients were randomized to receive a femoral nerve block by a needle entry point either 1 CUN lateral, 1 cm lateral, or 2 cm lateral to the femoral artery at the level of the inguinal crease. The time from needle entry to injection of local anesthetic was measured by an investigator blind to the technique, who also counted the frequency of needle repositioning, graded the ease of the block and its success, and registered complications. Good correlation occurred between weight and CUN (r = 0.79) and height and CUN (r = 0.83), which indicates that the CUN of a normal person (predefined as 175 cm tall and 70 kg weight) is 18.7 +/- 1 mm. In the CUN group, the femoral block was achieved significantly faster (P < .01) with fewer attempts (P < .003). The success rate was the same and complications did not differ significantly between the groups. A needle insertion point 1 CUN lateral to the midpoint of the palpated femoral artery at the level of the inguinal crease makes femoral nerve blocks faster and easier compared with conventional landmark 1 cm to 2 cm lateral to the artery.

Advanced Aero-Propulsive Mid-Lift-to-Drag Ratio Entry Vehicle for Future Exploration Missions

NASA Technical Reports Server (NTRS)

Campbell, C. H.; Stosaric, R. R; Cerimele, C. J.; Wong, K. A.; Valle, G. D.; Garcia, J. A.; Melton, J. E.; Munk, M. M.; Blades, E.; Kuruvila, G.;

Description of a user-oriented geographic information system - The resource analysis program

NASA Technical Reports Server (NTRS)

Tilmann, S. E.; Mokma, D. L.

1980-01-01

This paper describes the Resource Analysis Program, an applied geographic information system. Several applications are presented which utilized soil, and other natural resource data, to develop integrated maps and data analyses. These applications demonstrate the methods of analysis and the philosophy of approach used in the mapping system. The applications are evaluated in reference to four major needs of a functional mapping system: data capture, data libraries, data analysis, and mapping and data display. These four criteria are then used to describe an effort to develop the next generation of applied mapping systems. This approach uses inexpensive microcomputers for field applications and should prove to be a viable entry point for users heretofore unable or unwilling to venture into applied computer mapping.

Legacy system integration using web technology

NASA Astrophysics Data System (ADS)

Kennedy, Richard L.; Seibert, James A.; Hughes, Chris J.

2000-05-01

As healthcare moves towards a completely digital, multimedia environment there is an opportunity to provide for cost- effective, highly distributed physician access to clinical information including radiology-based imaging. In order to address this opportunity a Universal Clinical Desktop (UCD) system was developed. A UCD provides a single point of entry into an integrated view of all types of clinical data available within a network of disparate healthcare information systems. In order to explore the application of a UCD in a hospital environment, a pilot study was established with the University of California Davis Medical Center using technology from Trilix Information Systems. Within this pilot environment the information systems integrated under the UCD include a radiology information system (RIS), a picture archive and communication system (PACS) and a laboratory information system (LIS).

Adjustable Bracket For Entry Of Welding Wire

NASA Technical Reports Server (NTRS)

Gilbert, Jeffrey L.; Gutow, David A.

1993-01-01

Wire-entry bracket on welding torch in robotic welding system provides for adjustment of angle of entry of welding wire over range of plus or minus 30 degrees from nominal entry angle. Wire positioned so it does not hide weld joint in view of through-the-torch computer-vision system part of robot-controlling and -monitoring system. Swiveling bracket also used on nonvision torch on which wire-feed-through tube interferes with workpiece. Angle simply changed to one giving sufficient clearance.

Virtual remote center of motion control for needle placement robots.

PubMed

Boctor, Emad M; Webster, Robert J; Mathieu, Herve; Okamura, Allison M; Fichtinger, Gabor

2004-01-01

We present an algorithm that enables percutaneous needle-placement procedures to be performed with unencoded, unregistered, minimally calibrated robots while removing the constraint of placing the needle tip on a mechanically enforced Remote Center of Motion (RCM). The algorithm requires only online tracking of the surgical tool and a five-degree-of-freedom (5-DOF) robot comprising three prismatic DOF and two rotational DOF. An incremental adaptive motion control cycle guides the needle to the insertion point and also orients it to align with the target-entry-point line. The robot executes RCM motion without having a physically constrained fulcrum point. The proof-of-concept prototype system achieved 0.78 mm translation accuracy and 1.4 degrees rotational accuracy (this is within the tracker accuracy) within 17 iterative steps (0.5-1 s). This research enables robotic assistant systems for image-guided percutaneous procedures to be prototyped/constructed more quickly and less expensively than has been previously possible. Since the clinical utility of such systems is clear and has been demonstrated in the literature, our work may help promote widespread clinical adoption of this technology by lowering system cost and complexity.

Automated microwave ablation therapy planning with single and multiple entry points

NASA Astrophysics Data System (ADS)

Liu, Sheena X.; Dalal, Sandeep; Kruecker, Jochen

2012-02-01

Microwave ablation (MWA) has become a recommended treatment modality for interventional cancer treatment. Compared with radiofrequency ablation (RFA), MWA provides more rapid and larger-volume tissue heating. It allows simultaneous ablation from different entry points and allows users to change the ablation size by controlling the power/time parameters. Ablation planning systems have been proposed in the past, mainly addressing the needs for RFA procedures. Thus a planning system addressing MWA-specific parameters and workflows is highly desirable to help physicians achieve better microwave ablation results. In this paper, we design and implement an automated MWA planning system that provides precise probe locations for complete coverage of tumor and margin. We model the thermal ablation lesion as an ellipsoidal object with three known radii varying with the duration of the ablation and the power supplied to the probe. The search for the best ablation coverage can be seen as an iterative optimization problem. The ablation centers are steered toward the location which minimizes both un-ablated tumor tissue and the collateral damage caused to the healthy tissue. We assess the performance of our algorithm using simulated lesions with known "ground truth" optimal coverage. The Mean Localization Error (MLE) between the computed ablation center in 3D and the ground truth ablation center achieves 1.75mm (Standard deviation of the mean (STD): 0.69mm). The Mean Radial Error (MRE) which is estimated by comparing the computed ablation radii with the ground truth radii reaches 0.64mm (STD: 0.43mm). These preliminary results demonstrate the accuracy and robustness of the described planning algorithm.

Anatomic determination of optimal entry point and direction for C1 lateral mass screw placement.

PubMed

Blagg, Stuart E; Don, Angus S; Robertson, Peter A

2009-06-01

Anatomic study of C1 osteology using computerized tomography. To define the anatomy of the C1 lateral mass and make recommendations for optimal entry point and screw placement at C1. C1 lateral mass screw fixation is a reliable biomechanical technique that gives equivalent stability to that of Magerl transarticular screw fixation combined with posterior wiring for C1-C2 fusion. Use of a lateral mass screw allows alternative stabilization constructs to the transarticular technique when C2 vertebral artery anatomy is unfavorable. Because the vertebral artery travels lateral to the lateral mass, then crosses medially over the C1 neural arch, it is at risk during instrumentation. Medially, the cord and canal contents are at risk. While the anatomy of the C1 vertebra and lateral mass is well known, specific definition of ideal entry points, screw pathway direction, and dimensions of screws requires further clarification to enable a clinically safe surgical technique. Fifty consecutive patients underwent computerized tomography scans of their cervical spine. Using calibrated scans, measurements were taken to give the average dimensions of the C1 vertebra with a view for insertion of lateral mass screws beneath the posterior arch. The range of anatomic dimensions was examined to assess risk of vertebral artery damage in this population. The average length of screw within the lateral mass is 17.9 mm with 21.5 mm of screw posterior to the lateral mass, necessary to allow rod placement posteriorly. The safest entry point was directly beneath the medial edge of the posterior arch/lamina where it joins the lateral mass. The ideal direction of screw angulation in the sagittal plane was parallel to the posterior arch of C1. In the medial lateral plane, direct anterior placement could be used, but the lateral mass will tolerate 20 degrees of medial angulation from this starting point. The average distance between the vertebral artery foramen laterally and the screw pathway was 8.8 mm using these landmarks, and 5.8 mm from the medial aspect of the lateral mass. The range of anatomic variation was such that 9 lateral masses had a vertebral artery foramen to screw distance of only 3 mm. The vertebral artery was not at risk when these anatomic landmarks were used. C1 lateral mass screws are best placed beneath the posterior arch, parallel with the arch in the sagittal plan. The entry point is the medial border of the neural arch at its junction with the lateral mass. Straight ahead screw direction is safe in the axial plane, but up to 20 degrees of medial angulation will increase the safety margin from the vertebral artery foramen, and this technique avoids vertebral artery damage and optimizes lateral mass screw purchase. We suggest that this is the preferred method of entry into the lateral mass of C1.

Optimizing TLB entries for mixed page size storage in contiguous memory

DOEpatents

Chen, Dong; Gara, Alan; Giampapa, Mark E.; Heidelberger, Philip; Kriegel, Jon K.; Ohmacht, Martin; Steinmacher-Burow, Burkhard

2013-04-30

A system and method for accessing memory are provided. The system comprises a lookup buffer for storing one or more page table entries, wherein each of the one or more page table entries comprises at least a virtual page number and a physical page number; a logic circuit for receiving a virtual address from said processor, said logic circuit for matching the virtual address to the virtual page number in one of the page table entries to select the physical page number in the same page table entry, said page table entry having one or more bits set to exclude a memory range from a page.

Avenues into Food Planning: A Review of Scholarly Food System Research

PubMed Central

Brinkley, Catherine

2014-01-01

This review summarizes several avenues of planning inquiry into food systems research, revealing gaps in the literature, allied fields of study and mismatches between scholarly disciplines and the food system life cycle. Planners and scholars in associated fields have identified and defined problems in the food system as ‘wicked’ problems, complex environmental issues that require systemic solutions at the community scale. While food justice scholars have contextualized problem areas, planning scholars have made a broad case for planning involvement in solving these wicked problems while ensuring that the functional and beneficial parts of the food system continue to thrive. This review maps the entry points of scholarly interest in food systems and planning’s contributions to its study, charting a research agenda for the future. PMID:24932131

Reducing number entry errors: solving a widespread, serious problem.

PubMed

Thimbleby, Harold; Cairns, Paul

2010-10-06

Number entry is ubiquitous: it is required in many fields including science, healthcare, education, government, mathematics and finance. People entering numbers are to be expected to make errors, but shockingly few systems make any effort to detect, block or otherwise manage errors. Worse, errors may be ignored but processed in arbitrary ways, with unintended results. A standard class of error (defined in the paper) is an 'out by 10 error', which is easily made by miskeying a decimal point or a zero. In safety-critical domains, such as drug delivery, out by 10 errors generally have adverse consequences. Here, we expose the extent of the problem of numeric errors in a very wide range of systems. An analysis of better error management is presented: under reasonable assumptions, we show that the probability of out by 10 errors can be halved by better user interface design. We provide a demonstration user interface to show that the approach is practical.To kill an error is as good a service as, and sometimes even better than, the establishing of a new truth or fact. (Charles Darwin 1879 [2008], p. 229).

Get It through Your Thick Head: Emerging Principles in Neuroimmunology and Neurovirology Redefine Central Nervous System "Immune Privilege".

PubMed

Solomos, Andreas C; Rall, Glenn F

2016-04-20

The central nervous system (CNS) coordinates all aspects of life, autonomic and sentient, though how it has evolved to contend with pathogenic infections remains, to a great degree, a mystery. The skull and cerebrospinal fluid (CSF) provide protection from blunt force contacts, and it was once thought that the blood-brain barrier (BBB) was a fortress that restricted pathogen entry and limited inflammation. Recent studies, however, have caused a revision of this viewpoint: the CNS is monitored by blood-borne lymphocytes, but can use alternative strategies to prevent or resolve many pathogenic challenges. In this Review, we discuss emerging principles that indicate how the CNS is immunologically unique from peripheral tissues. We focus on developments that include glymphatics, recently characterized brain lymphatic vessels, distinctions in innate and adaptive immune strategies, novel points of entry for neurotropic viruses, and, finally, how the periphery can influence CNS homeostasis and immune responses within the brain. Collectively, these attributes demand a re-evaluation of immunity in the brain: not privileged, but distinct.

Stability and Change in the Cognitive and Adaptive Behaviour Scores of Preschoolers with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Flanagan, Helen E.; Smith, Isabel M.; Vaillancourt, Tracy; Duku, Eric; Szatmari, Peter; Bryson, Susan; Fombonne, Eric; Mirenda, Pat; Roberts, Wendy; Volden, Joanne; Waddell, Charlotte; Zwaigenbaum, Lonnie; Bennett, Teresa; Elsabbagh, Mayada; Georgiades, Stelios

2015-01-01

We examined the stability of cognitive and adaptive behaviour standard scores in children with autism spectrum disorder (ASD) between diagnosis and school entry approximately age 6. IQ increased 18 points in 2-year-olds, 12 points in 3-year-olds, and 9 points in 4-year-olds (N = 281). Adaptive behaviour scores increased 4 points across age groups…

The Development of Children at Familial Risk for Dyslexia: Birth to Early School Age

ERIC Educational Resources Information Center

Lyytinen, Heikki; Aro, Mikko; Eklund, Kenneth; Erskine, Jane; Guttorm, Tomi; Laakso, Marja-Leena; Leppanen, Paavo H. T.; Lyytinen, Paula; Poikkeus, Anna-Maija; Richardson, Ulla; Torppa, Minna

2004-01-01

Children at risk for familial dyslexia (n = 107) and their controls (n = 93) have been followed from birth to school entry in the Jyvaskyla Longitudinal study of Dyslexia (JLD) on developmental factors linked to reading and dyslexia. At the point of school entry, the majority of the at-risk children displayed decoding ability that fell at least 1…

Dual Heat Pulse, Dual Layer Thermal Protection System Sizing Analysis and Trade Studies for Human Mars Entry Descent and Landing

NASA Technical Reports Server (NTRS)

McGuire, Mary Kathleen

2011-01-01

NASA has been recently updating design reference missions for the human exploration of Mars and evaluating the technology investments required to do so. The first of these started in January 2007 and developed the Mars Design Reference Architecture 5.0 (DRA5). As part of DRA5, Thermal Protection System (TPS) sizing analysis was performed on a mid L/D rigid aeroshell undergoing a dual heat pulse (aerocapture and atmospheric entry) trajectory. The DRA5 TPS subteam determined that using traditional monolithic ablator systems would be mass expensive. They proposed a new dual-layer TPS concept utilizing an ablator atop a low thermal conductivity insulative substrate to address the issue. Using existing thermal response models for an ablator and insulative tile, preliminary hand analysis of the dual layer concept at a few key heating points indicated that the concept showed potential to reduce TPS masses and warranted further study. In FY09, the followon Entry, Descent and Landing Systems Analysis (EDL-SA) project continued by focusing on Exploration-class cargo or crewed missions requiring 10 to 50 metric tons of landed payload. The TPS subteam advanced the preliminary dual-layer TPS analysis by developing a new process and updated TPS sizing code to rapidly evaluate mass-optimized, full body sizing for a dual layer TPS that is capable of dual heat pulse performance. This paper describes the process and presents the results of the EDL-SA FY09 dual-layer TPS analyses on the rigid mid L/D aeroshell. Additionally, several trade studies were conducted with the sizing code to evaluate the impact of various design factors, assumptions and margins.

Hazards Data Distribution System (HDDS)

USGS Publications Warehouse

Jones, Brenda; Lamb, Rynn M.

2015-07-09

When emergencies occur, first responders and disaster response teams often need rapid access to aerial photography and satellite imagery that is acquired before and after the event. The U.S. Geological Survey (USGS) Hazards Data Distribution System (HDDS) provides quick and easy access to pre- and post-event imagery and geospatial datasets that support emergency response and recovery operations. The HDDS provides a single, consolidated point-of-entry and distribution system for USGS-hosted remotely sensed imagery and other geospatial datasets related to an event response. The data delivery services are provided through an interactive map-based interface that allows emergency response personnel to rapidly select and download pre-event ("baseline") and post-event emergency response imagery.

Identifying and Overcoming Obstacles to Point-of-Care Data Collection for Eye Care Professionals

PubMed Central

Lobach, David F.; Silvey, Garry M.; Macri, Jennifer M.; Hunt, Megan; Kacmaz, Roje O.; Lee, Paul P.

2005-01-01

Supporting data entry by clinicians is considered one of the greatest challenges in implementing electronic health records. In this paper we describe a formative evaluation study using three different methodologies through which we identified obstacles to point-of-care data entry for eye care and then used the formative process to develop and test solutions to overcome these obstacles. The greatest obstacles were supporting free text annotation of clinical observations and accommodating the creation of detailed diagrams in multiple colors. To support free text entry, we arrived at an approach that captures an image of a free text note and associates this image with related data elements in an encounter note. The detailed diagrams included a color pallet that allowed changing pen color with a single stroke and also captured the diagrams as an image associated with related data elements. During observed sessions with simulated patients, these approaches satisfied the clinicians’ documentation needs by capturing the full range of clinical complexity that arises in practice. PMID:16779083

Very early great saphenous vein graft aneurysm treated by percutaneous coronary intervention under ChromaFlo imaging guidance.

PubMed

Yamaguchi, Tetsuo; Miyamoto, Takamichi; Kawahatsu, Kandoh; Nozato, Toshihiro

2017-07-19

A 73-year-old man, who had undergone coronary artery bypass grafting (CABG) 10 days prior, presented with a great saphenous vein graft aneurysm (SVGA). CT revealed the increasing size of the aneurysm. Since the SVGA occurred immediately after CABG and there were no other complications, the aneurysm was treated percutaneously. While intravascular ultrasonography (IVUS) and optical coherence tomography failed to detect the entry point, an IVUS catheter with the addition of ChromaFlo imaging clearly revealed the entry point, size and length of the SVGA. To prevent migration and edge restenosis associated with covered stents, the covered stent (3.0×19 mm) was superimposed on a drug-eluting stent (3.0×28 mm) that covered the entry site. A follow-up study demonstrated the absence of flow into the aneurysm. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Optimizing the user interface of a data entry module for an electronic patient record for cardiac rehabilitation: A mixed method usability approach.

PubMed

van Engen-Verheul, Mariëtte M; Peute, Linda W P; de Keizer, Nicolette F; Peek, Niels; Jaspers, Monique W M

2016-03-01

Cumbersome electronic patient record (EPR) interfaces may complicate data-entry in clinical practice. Completeness of data entered in the EPR determines, among other things, the value of computerized clinical decision support (CCDS). Quantitative usability evaluations can provide insight into mismatches between the system design model of data entry and users' data entry behavior, but not into the underlying causes for these mismatches. Mixed method usability evaluation studies may provide these insights, and thus support generating redesign recommendations for improving an EPR system's data entry interface. To improve the usability of the data entry interface of an EPR system with CCDS in the field of cardiac rehabilitation (CR), and additionally, to assess the value of a mixed method usability approach in this context. Seven CR professionals performed a think-aloud usability evaluation both before (beta-version) and after the redesign of the system. Observed usability problems from both evaluations were analyzed and categorized using Zhang et al.'s heuristic principles of good interface design. We combined the think-aloud usability evaluation of the system's beta-version with the measurement of a new usability construct: users' deviations in action sequence from the system's predefined data entry order sequence. Recommendations for redesign were implemented. We assessed whether the redesign improved CR professionals' (1) task efficacy (with respect to the completeness of data they collected), and (2) task efficiency (with respect to the average number of mouse clicks they needed to complete data entry subtasks). With the system's beta version, 40% of health care professionals' navigation actions through the system deviated from the predefined next system action. The causes for these deviations as revealed by the think-aloud method mostly concerned mismatches between the system design model for data entry action sequences and users expectations of these action sequences, based on their paper-based daily routines. This caused non completion of data entry tasks (31% of main tasks completed), and more navigation actions than minimally required (146% of the minimum required). In the redesigned system the data entry navigational structure was organized in a flexible way around an overview screen to better mimic users' paper-based daily routines of collecting patient data. This redesign resulted in an increased number of completed main tasks (70%) and a decrease in navigation actions (133% of the minimum required). The think-aloud usability evaluation of the redesigned system showed that remaining problems concerned flexibility (e.g., lack of customization options) and consistency (mainly with layout and position of items on the screen). The mixed method usability evaluation was supportive in revealing the magnitude and causes of mismatches between the system design model of data-entry with users' data entry behavior. However, as both task efficacy and efficiency were still not optimal with the redesigned EPR, we advise to perform a cognitive analysis on end users' mental processes and behavior patterns in daily work processes specifically during the requirements analysis phase of development of interactive healthcare information systems. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Surgical anatomy of the radial nerve at the elbow.

PubMed

Artico, M; Telera, S; Tiengo, C; Stecco, C; Macchi, V; Porzionato, A; Vigato, E; Parenti, A; De Caro, R

2009-02-01

An anatomical study of the brachial portion of the radial nerve with surgical implications is proposed. Thirty specimens of arm from 20 fresh cadavers (11 male, 9 female) were used to examine the topographical relations of the radial nerve with reference to the following anatomical landmarks: acromion angle, medial and lateral epicondyles, point of division between the lateral and long heads of the triceps brachii, lateral intermuscular septum, site of division of the radial nerve into its superficial and posterior interosseous branches and entry and exit point of the posterior interosseous branch into the supinator muscle. The mean distances between the acromion angle and the medial and lateral levels of crossing the posterior aspect of the humerus were 109 (+/-11) and 157 (+/-11) mm, respectively. The mean length and calibre of the nerve in the groove were 59 (+/-4) and 6 (+/-1) mm, respectively. The division of the lateral and long heads of the triceps was found at a mean distance of 126 (+/-13) mm from the acromion angle. The mean distances between the lateral point of crossing the posterior aspect of the humerus and the medial and lateral epicondyles were 125 (+/-13) and 121 (+/-13) mm, respectively. The mean distance between the lateral point of crossing the posterior aspect of the humerus and the entry point in the lateral intermuscular septum (LIS) was 29 (+/-6) mm. The mean distances between the entry point of the nerve in the LIS and the medial and lateral epicondyles were 133 (+/-14) and 110 (+/-23) mm, respectively. Our study provides reliable and objective data of surgical anatomy of the radial nerve which should be always kept in mind by surgeons approaching to the surgery of the arm, in order to avoid iatrogenic injuries.

Possible concepts for an in situ Saturn probe mission

NASA Astrophysics Data System (ADS)

Coustenis, Athena; Lebreton, Jean-Pierre; Mousis, Olivier; Atkinson, David H.; Lunine, Jonathan I.; Reh, Kim R.; Fletcher, Leigh N.; Simon-Miller, Amy A.; Atreya, Sushil; Brinckerhoff, William B.; Cavalie, Thibault; Colaprete, Anthony; Gautier, Daniel; Guillot, Tristan; Mahaffy, Paul R.; Marty, Bernard; Morse, Andy; Sims, Jon; Spilker, Tom; Spilker, Linda

2014-05-01

In situ exploration of Saturn's atmosphere would bring insights in two broad themes: the formation history of our solar system and the processes at play in planetary atmospheres. The science case for in situ measurements at Saturn are developed in [1] and two companion abstracts (see Mousis et al., and Atkinson et al.). They are summarized here. Measurements of Saturn's bulk chemical and isotopic composition would place important constraints on the volatile reservoirs in the protosolar nebula and hence on the formation mechanisms. An in situ probe, penetrating from the upper atmosphere (μbar level) into the convective weather layer to a minimum depth of 10 bar, would also contribute to our knowledge of Saturn's atmospheric structure, dynamics, composition, chemistry and cloud-forming processes. Different mission architectures are envisaged, all based on an entry probe that would descend through Saturn's stratosphere and troposphere under parachute down to a minimum of 10 bars [1]. Future studies will focus on the trade-offs between science return and the added design complexity of a probe that could operate at pressures larger than 10 bars. Accelerometry measurements may also be performed during the entry phase in the higher part of the stratosphere prior to starting measurements under parachute. A carrier system would be required to deliver the probe along its interplanetary trajectory to the desired atmospheric entry point at Saturn. The entry site would be carefully selected. Three possible mission configurations are currently under study (with different risk/cost trades): • Configuration 1: Probe + Carrier. After probe delivery, the carrier would follow its path and be destroyed during atmospheric entry, but could perform pre-entry science. The carrier would not be used as a radio relay, but the probe would transmit its data to the ground system via a direct-to-Earth (DTE) RF link; • Configuration 2: Probe + Carrier/Relay. The probe would detach from the carrier several months prior to probe entry. The carrier trajectory would be designed to enable probe data relay during over-flight as well as performing approach and flyby science; • Configuration 3: Probe + Orbiter (similar to the Galileo Orbiter/Probe). As for Configuration 2, but after probe relay during over-flight, the orbiter would transition to a Saturn orbit and continue to perform orbital science. In all three configurations, the carrier/orbiter would be equipped with a combination of solar panels, secondary batteries and possibly a set of primary batteries for phases that require a high power demand, for example during the probe entry phase. Nuclear power would be considered for the carrier or the orbiter only if available solar power technology would be found to be infeasible. To match the measurement requirements, a model payload could include a mass spectrometer, a tunable laser system, a helium abundance detector, an atmospheric structure instrument, accelerometers, temperature sensors, pressure profile, Doppler wind and nephelometer instruments, etc. Such a mission would greatly benefit from strong international collaborations. References [1] Mousis et al. 2014, "Scientific Rationale of Saturn's in situ exploration", submitted to PSS (and references therein).

Orbiter entry trajectory corridors: 32000 pound payload, 67.5 percent center of gravity. [glide path data compilation

NASA Technical Reports Server (NTRS)

Treybig, J. H.

1975-01-01

Thermal and equilibrium glide boundaries were used to analyze and/or design shuttle orbiter entry trajectories. Plots are presented of orbiter thermal and equilibrium glide boundaries in the drag/mass-relative velocity dynamic pressure-relative velocity, and altitude-relative velocity planes for an orbiter having a 32,000 pound payload and a 67.5% center of gravity location. These boundaries were defined for control points 1 through 4 of the shuttle orbiter for 40 deg-30 deg and 38 deg-28 deg ramped angle of attack entry profiles and 40 deg, 38 deg, 35 deg, 30 deg, 28 deg, and 25 deg constant angle of attack entry profiles each at 20 deg, 15 deg, and 10 deg constant body flap settings.

Entry, Descent, and Landing With Propulsive Deceleration

NASA Technical Reports Server (NTRS)

Palaszewski, Bryan

2012-01-01

The future exploration of the Solar System will require innovations in transportation and the use of entry, descent, and landing (EDL) systems at many planetary landing sites. The cost of space missions has always been prohibitive, and using the natural planetary and planet s moons atmospheres for entry, descent, and landing can reduce the cost, mass, and complexity of these missions. This paper will describe some of the EDL ideas for planetary entry and survey the overall technologies for EDL that may be attractive for future Solar System missions.

Individual and system influences on waiting time for substance abuse treatment.

PubMed

Carr, Carey J A; Xu, Jiangmin; Redko, Cristina; Lane, D Timothy; Rapp, Richard C; Goris, John; Carlson, Robert G

2008-03-01

Waiting time is a contemporary reality of many drug abuse treatment programs, resulting in substantial problems for substance users and society. Individual and system factors that influence waiting time are diverse and may vary at different points in the treatment continuum. This study assessed waiting time preceding clinical assessment at a centralized intake unit and during the period after the assessment but before treatment entry. The present study included 577 substance abusers who were enrolled in a large clinical trial of two brief treatment interventions in a midsize metropolitan area in Ohio. Bivariate analyses identified individual and system factors that influenced preassessment and postassessment waiting time, as well as total wait to treatment services. Multivariate analyses demonstrated that longer wait time for an assessment is influenced by being court referred, less belief in having a substance abuse problem, and less desire for change. A shorter wait to actually enter treatment is predicted by having a case manager, being more ready for treatment, and having less severe employment and alcohol problems. The different influences present during the two waiting periods suggest that assessment and treatment programs need to implement system changes and entry enhancement interventions that are specific to the needs of substance abusers at each waiting period.

8 CFR 235.7 - Automated inspection services.

Code of Federal Regulations, 2012 CFR

2012-01-01

...—(i) Port Passenger Accelerated Service System (PORTPASS). A system in which certain ports-of-entry... application for entry by the alien program participants on the date PORTPASS is used. United States citizens... Service. Non-United States citizens must meet all applicable documentary and entry eligibility...

75 FR 5579 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... with re-entry controlled by passwords. The DLA Enterprise Hotline Program Database is also password...: * * * * * System location: Delete entry and replace with ``Director, DLA Accountability Office (DA), Headquarters....'' * * * * * Retention and disposal: Delete entry and replace with ``Records are destroyed/deleted 10 years after...

8 CFR 235.7 - Automated inspection services.

Code of Federal Regulations, 2013 CFR

2013-01-01

...—(i) Port Passenger Accelerated Service System (PORTPASS). A system in which certain ports-of-entry... application for entry by the alien program participants on the date PORTPASS is used. United States citizens... Service. Non-United States citizens must meet all applicable documentary and entry eligibility...

8 CFR 235.7 - Automated inspection services.

Code of Federal Regulations, 2011 CFR

2011-01-01

...—(i) Port Passenger Accelerated Service System (PORTPASS). A system in which certain ports-of-entry... application for entry by the alien program participants on the date PORTPASS is used. United States citizens... Service. Non-United States citizens must meet all applicable documentary and entry eligibility...

8 CFR 235.7 - Automated inspection services.

Code of Federal Regulations, 2014 CFR

2014-01-01

...—(i) Port Passenger Accelerated Service System (PORTPASS). A system in which certain ports-of-entry... application for entry by the alien program participants on the date PORTPASS is used. United States citizens... Service. Non-United States citizens must meet all applicable documentary and entry eligibility...

Total 25-Hydroxyvitamin D Determination by an Entry Level Triple Quadrupole Instrument: Comparison between Two Commercial Kits

PubMed Central

Cocci, Andrea; Zuppi, Cecilia; Persichilli, Silvia

2013-01-01

Objective. 25-hydroxyvitamin D2/D3 (25-OHD2/D3) determination is a reliable biomarker for vitamin D status. Liquid chromatography-tandem mass spectrometry was recently proposed as a reference method for vitamin D status evaluation. The aim of this work is to compare two commercial kits (Chromsystems and PerkinElmer) for 25-OHD2/D3 determination by our entry level LC-MS/MS. Design and Methods. Chromsystems kit adds an online trap column to an HPLC column and provides atmospheric pressure chemical ionization, isotopically labeled internal standard, and 4 calibrator points. PerkinElmer kit uses a solvent extraction and protein precipitation method. This kit can be used with or without derivatization with, respectively, electrospray and atmospheric pressure chemical ionization. For each analyte, there are isotopically labeled internal standards and 7 deuterated calibrator points. Results. Performance characteristics are acceptable for both methods. Mean bias between methods calculated on 70 samples was 1.9 ng/mL. Linear regression analysis gave an R 2 of 0.94. 25-OHD2 is detectable only with PerkinElmer kit in derivatized assay option. Conclusion. Both methods are suitable for routine. Chromsystems kit minimizes manual sample preparation, requiring only protein precipitation, but, with our system, 25-OHD2 is not detectable. PerkinElmer kit without derivatization does not guarantee acceptable performance with our LC-MS/MS system, as sample is not purified online. Derivatization provides sufficient sensitivity for 25-OHD2 detection. PMID:23555079

The roles of users personal characteristics and organisational support in the attitude towards using ERP systems in a Spanish public hospital.

PubMed

Escobar-Rodriguez, Tomas; Bartual-Sopena, Lourdes

Enterprise resources planning (ERP) systems enable central and integrative control over all processes throughout an organisation by ensuring one data entry point and the use of a common database. T his paper analyses the attitude of healthcare personnel towards the use of an ERP system in a Spanish public hospital, identifying influencing factors. This research is based on a regression analysis of latent variables using the optimisation technique of partial least squares. We propose a research model including possible relationships among different constructs using the technology acceptance model. Our results show that the personal characteristics of potential users are key factors in explaining attitude towards using ERP systems.

School Entry Requirements and Coverage of Nontargeted Adolescent Vaccines

PubMed Central

Reiter, Paul L.; Truong, Young K.; Rimer, Barbara K.; Brewer, Noel T.

2016-01-01

BACKGROUND: Low human papillomavirus (HPV) vaccination coverage is an urgent public health problem requiring action. To identify policy remedies to suboptimal HPV vaccination, we assessed the relationship between states’ school entry requirements and adolescent vaccination. METHODS: We gathered data on states’ school entry requirements for adolescent vaccination (tetanus, diphtheria, and pertussis [Tdap] booster; meningococcal; and HPV) from 2007 to 2012 from Immunization Action Coalition. The National Immunization Survey–Teen provided medical record–verified vaccination data for 99 921 adolescents. We calculated coverage (among 13- to 17-year-olds) for individual vaccinations and concomitant vaccination. HPV vaccination outcomes were among female adolescents. Analyses used weighted longitudinal multivariable models. RESULTS: States with requirements for Tdap booster and meningococcal vaccination had 22 and 24 percentage point increases in coverage for these vaccines, respectively, compared with other states (both P < .05). States with HPV vaccination requirements had <1 percentage point increase in coverage for this vaccine (P < .05). Tdap booster and meningococcal vaccination requirements, respectively, were associated with 8 and 4 percentage point spillover increases for HPV vaccination coverage (both P < .05) and with increases for concomitant vaccination (all P < .05). CONCLUSIONS: Ensuring all states have meningococcal vaccination requirements could improve the nation’s HPV vaccination coverage, given that many states already require Tdap booster but not meningococcal vaccination for school entry. Vaccination programs and clinicians should capitalize on changes in adolescent vaccination, including concomitant vaccination, that may arise after states adopt vaccination requirements. Additional studies are needed on the effects of HPV vaccination requirements and opt-out provisions. PMID:27940689

School Entry Requirements and Coverage of Nontargeted Adolescent Vaccines.

PubMed

Moss, Jennifer L; Reiter, Paul L; Truong, Young K; Rimer, Barbara K; Brewer, Noel T

2016-12-01

Low human papillomavirus (HPV) vaccination coverage is an urgent public health problem requiring action. To identify policy remedies to suboptimal HPV vaccination, we assessed the relationship between states' school entry requirements and adolescent vaccination. We gathered data on states' school entry requirements for adolescent vaccination (tetanus, diphtheria, and pertussis [Tdap] booster; meningococcal; and HPV) from 2007 to 2012 from Immunization Action Coalition. The National Immunization Survey-Teen provided medical record-verified vaccination data for 99 921 adolescents. We calculated coverage (among 13- to 17-year-olds) for individual vaccinations and concomitant vaccination. HPV vaccination outcomes were among female adolescents. Analyses used weighted longitudinal multivariable models. States with requirements for Tdap booster and meningococcal vaccination had 22 and 24 percentage point increases in coverage for these vaccines, respectively, compared with other states (both P < .05). States with HPV vaccination requirements had <1 percentage point increase in coverage for this vaccine (P < .05). Tdap booster and meningococcal vaccination requirements, respectively, were associated with 8 and 4 percentage point spillover increases for HPV vaccination coverage (both P < .05) and with increases for concomitant vaccination (all P < .05). Ensuring all states have meningococcal vaccination requirements could improve the nation's HPV vaccination coverage, given that many states already require Tdap booster but not meningococcal vaccination for school entry. Vaccination programs and clinicians should capitalize on changes in adolescent vaccination, including concomitant vaccination, that may arise after states adopt vaccination requirements. Additional studies are needed on the effects of HPV vaccination requirements and opt-out provisions. Copyright © 2016 by the American Academy of Pediatrics.

Guidelines for Improving Entry Into and Retention in Care and Antiretroviral Adherence for Persons With HIV: Evidence-Based Recommendations From an International Association of Physicians in AIDS Care Panel

PubMed Central

Thompson, Melanie A.; Mugavero, Michael J.; Amico, K. Rivet; Cargill, Victoria A.; Chang, Larry W.; Gross, Robert; Orrell, Catherine; Altice, Frederick L.; Bangsberg, David R.; Bartlett, John G.; Beckwith, Curt G.; Dowshen, Nadia; Gordon, Christopher M.; Horn, Tim; Kumar, Princy; Scott, James D.; Stirratt, Michael J.; Remien, Robert H.; Simoni, Jane M.; Nachega, Jean B.

2014-01-01

Description After HIV diagnosis, timely entry into HIV medical care and retention in that care are essential to the provision of effective antiretroviral therapy (ART). ART adherence is among the key determinants of successful HIV treatment outcome and is essential to minimize the emergence of drug resistance. The International Association of Physicians in AIDS Care convened a panel to develop evidence-based recommendations to optimize entry into and retention in care and ART adherence for people with HIV. Methods A systematic literature search was conducted to produce an evidence base restricted to randomized, controlled trials and observational studies with comparators that had at least 1 measured biological or behavioral end point. A total of 325 studies met the criteria. Two reviewers independently extracted and coded data from each study using a standardized data extraction form. Panel members drafted recommendations based on the body of evidence for each method or intervention and then graded the overall quality of the body of evidence and the strength for each recommendation. Recommendations Recommendations are provided for monitoring of entry into and retention in care, interventions to improve entry and retention, and monitoring of and interventions to improve ART adherence. Recommendations cover ART strategies, adherence tools, education and counseling, and health system and service delivery interventions. In addition, they cover specific issues pertaining to pregnant women, incarcerated individuals, homeless and marginally housed individuals, and children and adolescents, as well as substance use and mental health disorders. Recommendations for future research in all areas are also provided. PMID:22393036

Development of Curie point switching for thin film, random access, memory device

NASA Technical Reports Server (NTRS)

Lewicki, G. W.; Tchernev, D. I.

1967-01-01

Managanese bismuthide films are used in the development of a random access memory device of high packing density and nondestructive readout capability. Memory entry is by Curie point switching using a laser beam. Readout is accomplished by microoptical or micromagnetic scanning.

Four-point injection technique for lip augmentation.

PubMed

Sahan, Ali; Funda, Tamer

2018-06-01

Lip augmentation procedures with hyaluronic acid dermal fillers have become increasingly popular worldwide because full lips are often considered beautiful and youthful. The goal of a lip augmentation procedure is to create smooth lips with adequate volume and a natural appearance. Various techniques for lip augmentation have been utilized and described. In the four-point injection technique, the lips were divided equally into right side and left side. Four entry points were made above the vermilion border for the upper lip and below the vermilion border for the lower lip. The filler was administered with a fanning technique through each entry point. Between January 2017 and November 2017, 50 female patients underwent a nonsurgical lip augmentation procedure with injectable fillers using this technique. Forty-five patients (90%) reported that they were satisfied or extremely satisfied with their lip enhancement procedure. No serious complications were observed. The advantages of this technique are reducing the risk of complications like erythema, edema, and vascular injuries, and providing easy access to injection sites.

Mars Science Laboratory Entry, Descent and Landing System Overview

NASA Technical Reports Server (NTRS)

Steltzner, Adam D.; San Martin, A. Miguel; Rivellini, Tomasso P.; Chen, Allen

2013-01-01

The Mars Science Laboratory project recently places the Curiosity rove on the surface of Mars. With the success of the landing system, the performance envelope of entry, descent and landing capabilities has been extended over the previous state of the art. This paper will present an overview to the MSL entry, descent and landing system design and preliminary flight performance results.

Generic aerocapture atmospheric entry study, volume 1

NASA Technical Reports Server (NTRS)

1980-01-01

An atmospheric entry study to fine a generic aerocapture vehicle capable of missions to Mars, Saturn, and Uranus is reported. A single external geometry was developed through atmospheric entry simulations. Aerocapture is a system design concept which uses an aerodynamically controlled atmospheric entry to provide the necessary velocity depletion to capture payloads into planetary orbit. Design concepts are presented which provide the control accuracy required while giving thermal protection for the mission payload. The system design concepts consist of the following elements: (1) an extendable biconic aerodynamic configuration with lift to drag ratio between 1.0 and 2.0; (2) roll control system concepts to control aerodynamic lift and disturbance torques; (3) aeroshell design concepts capable of meeting dynamic pressure loads during aerocapture; and (4) entry thermal protection system design concepts to meet thermodynamic loads during aerocapture.

Implementation of home-based medication order entry at a community hospital.

PubMed

Thorne, Alicia; Williamson, Sarah; Jellison, Tara; Jellison, Chris

2009-11-01

The implementation of a home-based order-entry program at a community hospital is described. Parkview Hospital is a 600-bed, community-based facility located in Fort Wayne, Indiana, that provides 24-hour pharmacy services. The main purpose for establishing a home-based order-entry program was to provide extra pharmacist coverage during the event of a spontaneous order surge in an effort to maintain excellent customer service. A virtual private network (VPN) was created to ensure the security and confidentiality of patients' health care information. The names of volunteer pharmacists who met specific criteria and who were capable of performing home-based order entry were collected. These pharmacists were trained and tested in the home-based order-entry process. When home-based order-entry is needed, the lead pharmacist contacts the pharmacists on the list by telephone. If available, the pharmacists (maximum of three) are notified to log into the Internet, access the VPN, and perform order entry with the same vigilance, confidentiality, and care as they would onsite. Home-based order entry is discontinued when off-trigger points are met. Pharmacists entering orders from home are paid by the time spent conducting order entry. Pharmacists reported that the program was easy to contact home-based order-entry volunteers, there were no problems with logging into the VPNs, and turnaround time was close to our target of 25 minutes. A community-based hospital successfully implemented a home-based medication order-entry program. The program alleviated the shortage of pharmacists during spontaneous surges of medication orders.

27. View of entry door to vestibule to MWOC entry ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. View of entry door to vestibule to MWOC entry door in transmitter building no. 102 (note coded key pad to left and intercom phone on left) and door to the central systems monitor room (CSMR) to right (out of sight). - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Mars Science Laboratory (MSL) Entry, Descent, and Landing Instrumentation (MEDLI): Complete Flight Data Set

NASA Technical Reports Server (NTRS)

Cheatwood, F. McNeil; Bose, Deepak; Karlgaard, Christopher D.; Kuhl, Christopher A.; Santos, Jose A.; Wright, Michael J.

2014-01-01

The Mars Science Laboratory (MSL) entry vehicle (EV) successfully entered the Mars atmosphere and landed the Curiosity rover safely on the surface of the planet in Gale crater on August 6, 2012. MSL carried the MSL Entry, Descent, and Landing (EDL) Instrumentation (MEDLI). MEDLI delivered the first in-depth understanding of the Mars entry environments and the response of the entry vehicle to those environments. MEDLI was comprised of three major subsystems: the Mars Entry Atmospheric Data System (MEADS), the MEDLI Integrated Sensor Plugs (MISP), and the Sensor Support Electronics (SSE). Ultimately, the entire MEDLI sensor suite consisting of both MEADS and MISP provided measurements that were used for trajectory reconstruction and engineering validation of aerodynamic, atmospheric, and thermal protection system (TPS) models in addition to Earth-based systems testing procedures. This report contains in-depth hardware descriptions, performance evaluation, and data information of the three MEDLI subsystems.

CHOmine: an integrated data warehouse for CHO systems biology and modeling.

PubMed

Gerstl, Matthias P; Hanscho, Michael; Ruckerbauer, David E; Zanghellini, Jürgen; Borth, Nicole

2017-01-01

The last decade has seen a surge in published genome-scale information for Chinese hamster ovary (CHO) cells, which are the main production vehicles for therapeutic proteins. While a single access point is available at www.CHOgenome.org, the primary data is distributed over several databases at different institutions. Currently research is frequently hampered by a plethora of gene names and IDs that vary between published draft genomes and databases making systems biology analyses cumbersome and elaborate. Here we present CHOmine, an integrative data warehouse connecting data from various databases and links to other ones. Furthermore, we introduce CHOmodel, a web based resource that provides access to recently published CHO cell line specific metabolic reconstructions. Both resources allow to query CHO relevant data, find interconnections between different types of data and thus provides a simple, standardized entry point to the world of CHO systems biology. http://www.chogenome.org. © The Author(s) 2017. Published by Oxford University Press.

Mission Sizing and Trade Studies for Low Ballistic Coefficient Entry Systems to Venus

NASA Technical Reports Server (NTRS)

Dutta, Soumyo; Smith, Brandon; Prabhu, Dinesh; Venkatapathy, Ethiraj

2012-01-01

The U.S and the U.S.S.R. have sent seventeen successful atmospheric entry missions to Venus. Past missions to Venus have utilized rigid aeroshell systems for entry. This rigid aeroshell paradigm sets performance limitations since the size of the entry vehicle is constrained by the fairing diameter of the launch vehicle. This has limited ballistic coefficients (beta) to well above 100 kg/m2 for the entry vehicles. In order to maximize the science payload and minimize the Thermal Protection System (TPS) mass, these missions have entered at very steep entry flight path angles (gamma). Due to Venus thick atmosphere and the steep-gamma, high- conditions, these entry vehicles have been exposed to very high heat flux, very high pressures and extreme decelerations (upwards of 100 g's). Deployable aeroshells avoid the launch vehicle fairing diameter constraint by expanding to a larger diameter after the launch. Due to the potentially larger wetted area, deployable aeroshells achieve lower ballistic coefficients (well below 100 kg/m2), and if they are flown at shallower flight path angles, the entry vehicle can access trajectories with far lower decelerations (50-60 g's), peak heat fluxes (400 W/cm2) and peak pressures. The structural and TPS mass of the shallow-gamma, low-beta deployables are lower than their steep-gamma, high-beta rigid aeroshell counterparts at larger diameters, contributing to lower areal densities and potentially higher payload mass fractions. For example, at large diameters, deployables may attain aeroshell areal densities of 10 kg/m2 as opposed to 50 kg/m2 for rigid aeroshells. However, the low-beta, shallow-gamma paradigm also raises issues, such as the possibility of skip-out during entry. The shallow-gamma could also increase the landing footprint of the vehicle. Furthermore, the deployable entry systems may be flexible, so there could be fluid-structure interaction, especially in the high altitude, low-density regimes. The need for precision in guidance, navigation and control during entry also has to be better understood. This paper investigates some of the challenges facing the design of a shallow-gamma, low-beta entry system.

Development of Thermal Protection Materials for Future Mars Entry, Descent and Landing Systems

NASA Technical Reports Server (NTRS)

Cassell, Alan M.; Beck, Robin A. S.; Arnold, James O.; Hwang, Helen; Wright, Michael J.; Szalai, Christine E.; Blosser, Max; Poteet, Carl C.

2010-01-01

Entry Systems will play a crucial role as NASA develops the technologies required for Human Mars Exploration. The Exploration Technology Development Program Office established the Entry, Descent and Landing (EDL) Technology Development Project to develop Thermal Protection System (TPS) materials for insertion into future Mars Entry Systems. An assessment of current entry system technologies identified significant opportunity to improve the current state of the art in thermal protection materials in order to enable landing of heavy mass (40 mT) payloads. To accomplish this goal, the EDL Project has outlined a framework to define, develop and model the thermal protection system material concepts required to allow for the human exploration of Mars via aerocapture followed by entry. Two primary classes of ablative materials are being developed: rigid and flexible. The rigid ablatives will be applied to the acreage of a 10x30 m rigid mid L/D Aeroshell to endure the dual pulse heating (peak approx.500 W/sq cm). Likewise, flexible ablative materials are being developed for 20-30 m diameter deployable aerodynamic decelerator entry systems that could endure dual pulse heating (peak aprrox.120 W/sq cm). A technology Roadmap is presented that will be used for facilitating the maturation of both the rigid and flexible ablative materials through application of decision metrics (requirements, key performance parameters, TRL definitions, and evaluation criteria) used to assess and advance the various candidate TPS material technologies.

41 CFR 101-30.304 - Application of item entry control.

Code of Federal Regulations, 2012 CFR

2012-07-01

... entry control. 101-30.304 Section 101-30.304 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 30-FEDERAL CATALOG SYSTEM 30.3-Cataloging Items of Supply § 101-30.304 Application of item entry control. In addition...

Mars Entry Atmospheric Data System Trajectory Reconstruction Algorithms and Flight Results

NASA Technical Reports Server (NTRS)

Karlgaard, Christopher D.; Kutty, Prasad; Schoenenberger, Mark; Shidner, Jeremy; Munk, Michelle

2013-01-01

The Mars Entry Atmospheric Data System is a part of the Mars Science Laboratory, Entry, Descent, and Landing Instrumentation project. These sensors are a system of seven pressure transducers linked to ports on the entry vehicle forebody to record the pressure distribution during atmospheric entry. These measured surface pressures are used to generate estimates of atmospheric quantities based on modeled surface pressure distributions. Specifically, angle of attack, angle of sideslip, dynamic pressure, Mach number, and freestream atmospheric properties are reconstructed from the measured pressures. Such data allows for the aerodynamics to become decoupled from the assumed atmospheric properties, allowing for enhanced trajectory reconstruction and performance analysis as well as an aerodynamic reconstruction, which has not been possible in past Mars entry reconstructions. This paper provides details of the data processing algorithms that are utilized for this purpose. The data processing algorithms include two approaches that have commonly been utilized in past planetary entry trajectory reconstruction, and a new approach for this application that makes use of the pressure measurements. The paper describes assessments of data quality and preprocessing, and results of the flight data reduction from atmospheric entry, which occurred on August 5th, 2012.

ICD-10 mental and behavioural disorders due to use of crack and powder cocaine as treated at a public psychiatric emergency service: an analysis of visit predictors.

PubMed

da Cruz, Thalita Alves; da Cunha, Gustavo Nunes; de Moraes, Vinicius Papa Milani; Massarini, Renata; Yoshida, Camila Mie Kawata; Tenguam, Patrícia Tomiatto; Garcia, Marcelo Valeiro; Varoto, Daniela Arruda; de Oliveira, Murilo Barutti; de Andrade, Arthur Guerra; de Azevedo-Marques Périco, Cíntia; do Nascimento, Vania Barbosa; Castaldelli-Maia, João Mauricio

2014-08-01

The present study investigated the predictors of an increased number of visits from individuals with some of the diagnoses noted in chapter F14 of ICD-10, from calls to the emergency psychiatric unit of a general hospital in São Paulo state, Brazil, in the period 2011-2012. Poisson regression models were carried out for the outcome variable, accounting for number of subsequent visits to the psychiatric emergency unit. For the analysis of this outcome we took into account the exposure time of each individual in the study. Our findings point to a population at risk for frequent psychiatric emergency service visits: individuals over 25 years. This population should be targeted for interventions on entry into public healthcare due to increased psychiatric morbidity and greater clinical morbidity already confirmed by previous studies. We discussed the need of these individuals for special attention during the clinical or psychiatric emergency consultation which, unfortunately, may be the access point for the public health system. None of the other variables were related to the outcome of interest, such as those related to the level of individual entry into the care network before and after treatment, and other variables related to medical acts during the visit.

[Navigation in implantology: Accuracy assessment regarding the literature].

PubMed

Barrak, Ibrahim Ádám; Varga, Endre; Piffko, József

2016-06-01

Our objective was to assess the literature regarding the accuracy of the different static guided systems. After applying electronic literature search we found 661 articles. After reviewing 139 articles, the authors chose 52 articles for full-text evaluation. 24 studies involved accuracy measurements. Fourteen of our selected references were clinical and ten of them were in vitro (modell or cadaver). Variance-analysis (Tukey's post-hoc test; p < 0.05) was conducted to summarize the selected publications. Regarding 2819 results the average mean error at the entry point was 0.98 mm. At the level of the apex the average deviation was 1.29 mm while the mean of the angular deviation was 3,96 degrees. Significant difference could be observed between the two methods of implant placement (partially and fully guided sequence) in terms of deviation at the entry point, apex and angular deviation. Different levels of quality and quantity of evidence were available for assessing the accuracy of the different computer-assisted implant placement. The rapidly evolving field of digital dentistry and the new developments will further improve the accuracy of guided implant placement. In the interest of being able to draw dependable conclusions and for the further evaluation of the parameters used for accuracy measurements, randomized, controlled single or multi-centered clinical trials are necessary.

HOME TREATMENT DEVICES - MICROBIOLOGY OF POINT OF USE AND POINT OF ENTRY DEVICES

EPA Science Inventory

Consumer concerns over the quality of their drinking water have increased steadily over the past 15-20 years. This is primarily due to the perception of consumers, significantly influenced by news media reports, that contaminants (chemical and microbiological) in municipal drinki...

76 FR 18062 - U.S. Securities; Sale and Issue of Marketable Book-Entry Treasury Bills, Notes, and Bonds; Book...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

...; Sale and Issue of Marketable Book-Entry Treasury Bills, Notes, and Bonds; Book-Entry Treasury Bonds... longer be opened and transfers of securities from other book-entry systems will no longer be [email protected] . SUPPLEMENTARY INFORMATION: Legacy Treasury Direct [supreg] is a book- entry, non...

Using System Architecture, Review Entry Criteria, and Standard Work Package Data to Enable Rapid Development of Integrated Master Schedules

DTIC Science & Technology

2016-03-01

ENTRY CRITERIA, AND STANDARD WORK PACKAGE DATA TO ENABLE RAPID DEVELOPMENT OF INTEGRATED MASTER SCHEDULES by Burton W. Porter Jr. March 2016...2. REPORT DATE March 2016 3. REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE USING SYSTEM ARCHITECTURE, REVIEW ENTRY ... ENTRY CRITERIA, AND STANDARD WORK PACKAGE DATA TO ENABLE RAPID DEVELOPMENT OF INTEGRATED MASTER SCHEDULES Burton W. Porter Jr. Civilian

Auditing an Online Self-reported Interventional Radiology Adverse Event Database for Compliance and Accuracy.

PubMed

Burch, Ezra A; Shyn, Paul B; Chick, Jeffrey F; Chauhan, Nikunj R

2017-04-01

The purpose of this study was to determine whether auditing an online self-reported interventional radiology quality assurance database improves compliance with record entry or improves the accuracy of adverse event (AE) reporting and grading. Physicians were trained in using the database before the study began. An audit of all database entries for the first 3 months, or the first quarter, was performed, at which point physicians were informed of the audit process; entries for the subsequent 3 months, or the second quarter, were again audited. Results between quarters were compared. Compliance with record entry improved from the first to second quarter, but reminders were necessary to ensure 100% compliance with record entry. Knowledge of the audit process did not significantly improve self-reporting of AE or accuracy of AE grading. However, auditing significantly changed the final AE reporting rates and grades. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Short-Lasting Episodes of Torsade de Pointes in the Chronic Atrioventricular Block Dog Model Have a Focal Mechanism, While Longer-Lasting Episodes Are Maintained by Re-Entry.

PubMed

Vandersickel, Nele; Bossu, Alexandre; De Neve, Jan; Dunnink, Albert; Meijborg, Veronique M F; van der Heyden, Marcel A G; Beekman, Jet D M; De Bakker, Jacques M T; Vos, Marc A; Panfilov, Alexander V

2017-12-26

This study investigated the arrhythmogenic mechanisms responsible for torsade de pointes (TdP) in the chronic atrioventricular block dog model, known for its high susceptibility for TdP. The mechanism of TdP arrhythmias has been under debate for many years. Focal activity as well as re-entry have both been mentioned in the initiation and the perpetuation of TdP. In 5 TdP-sensitive chronic atrioventricular block dogs, 56 needle electrodes were evenly distributed transmurally to record 240 unipolar local electrograms simultaneously. Nonterminating (NT) episodes were defibrillated after 10 s. Software was developed to automatically detect activation times and to create 3-dimensional visualizations of the arrhythmia. For each episode of ectopic activity (ranging from 2 beats to NT episodes), a novel methodology was created to construct directed graphs of the wave propagation and detect re-entry loops by using an iterative depth-first-search algorithm. Depending on the TdP definition (number of consecutive ectopic beats), we analyzed 29 to 54 TdP: 29 were longer than 5 beats. In the total group, 9 were NT and 45 were self-terminating. Initiation and termination were always based on focal activity. Re-entry becomes more important in the longer-lasting episodes (>14 beats), whereas in all NT TdP, re-entry was the last active mechanism. During re-entry, excitation fronts were constantly present in the heart, while during focal TdP, there was always a silent interval between 2 consecutive waves (142 ms) during which excitation fronts were absent. Interbeat intervals were significantly smaller for re-entry episodes-220 versus 310 ms in focal. Electrograms recorded in particular areas during NT TdP episodes had significantly smaller amplitude (0.38) than during focal episodes (0.59). TdP can be driven by focal activity as well as by re-entry depending on the duration of the episode. NT episodes are always maintained by re-entry, which can be identified in local unipolar electrograms by shorter interbeat intervals and smaller deflection amplitude. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Sonic hedgehog initiates cochlear hair cell regeneration through downregulation of retinoblastoma protein

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Na; Department of Otolaryngology and Program in Neuroscience, Harvard Medical School and Eaton Peabody Laboratory, Massachusetts Eye and Ear Infirmary, Boston, MA 02114; Chen, Yan

Highlights: Black-Right-Pointing-Pointer Shh activation in neonatal cochleae enhances sensory cell proliferation. Black-Right-Pointing-Pointer Proliferating supporting cells can transdifferentiate into hair cells. Black-Right-Pointing-Pointer Shh promotes proliferation by transiently modulating pRb activity. Black-Right-Pointing-Pointer Shh inhibits pRb by inhibiting transcription and increasing phosphorylation of pRb. -- Abstract: Cell cycle re-entry by cochlear supporting cells and/or hair cells is considered one of the best approaches for restoring hearing loss as a result of hair cell damage. To identify mechanisms that can be modulated to initiate cell cycle re-entry and hair cell regeneration, we studied the effect of activating the sonic hedgehog (Shh) pathway. We showmore » that Shh signaling in postnatal rat cochleae damaged by neomycin leads to renewed proliferation of supporting cells and hair cells. Further, proliferating supporting cells are likely to transdifferentiate into hair cells. Shh treatment leads to inhibition of retinoblastoma protein (pRb) by increasing phosphorylated pRb and reducing retinoblastoma gene transcription. This results in upregulation of cyclins B1, D2, and D3, and CDK1. These results suggest that Shh signaling induces cell cycle re-entry in cochlear sensory epithelium and the production of new hair cells, in part by attenuating pRb function. This study provides an additional route to modulate pRb function with important implications in mammalian hair cell regeneration.« less

Computing the structural influence matrix for biological systems.

PubMed

Giordano, Giulia; Cuba Samaniego, Christian; Franco, Elisa; Blanchini, Franco

2016-06-01

We consider the problem of identifying structural influences of external inputs on steady-state outputs in a biological network model. We speak of a structural influence if, upon a perturbation due to a constant input, the ensuing variation of the steady-state output value has the same sign as the input (positive influence), the opposite sign (negative influence), or is zero (perfect adaptation), for any feasible choice of the model parameters. All these signs and zeros can constitute a structural influence matrix, whose (i, j) entry indicates the sign of steady-state influence of the jth system variable on the ith variable (the output caused by an external persistent input applied to the jth variable). Each entry is structurally determinate if the sign does not depend on the choice of the parameters, but is indeterminate otherwise. In principle, determining the influence matrix requires exhaustive testing of the system steady-state behaviour in the widest range of parameter values. Here we show that, in a broad class of biological networks, the influence matrix can be evaluated with an algorithm that tests the system steady-state behaviour only at a finite number of points. This algorithm also allows us to assess the structural effect of any perturbation, such as variations of relevant parameters. Our method is applied to nontrivial models of biochemical reaction networks and population dynamics drawn from the literature, providing a parameter-free insight into the system dynamics.

Development and implementation of an interdisciplinary plan of care.

PubMed

Lewis, Cynthia; Hoffmann, Mary Lou; Gard, Angela; Coons, Jacqueline; Bichinich, Pat; Euclid, Jeff

2005-01-01

In January 2002 Aurora Health Care Metro Region chartered an interdisciplinary team to develop a process and structure for patient-centered interdisciplinary care planning. This unique endeavor created a process that includes the patient, family, and all clinical disciplines involved in planning and providing care to patients from system point of entry throughout the entire acute care episode. The interdisciplinary plan of care (IPOC) demonstrates the integration of prioritized problems, outcomes, and measurement toward goal attainment. This article focuses on the journey of this team to the successful implementation of an IPOC.

The PEN&PAD data entry system: from prototype to practical system.

PubMed Central

Kirby, J.; Rector, A. L.

1996-01-01

This paper describes some of the issues addressed in the transition of the PEN&PAD from prototype clinical workstation to practical data entry system for use by general practitioners in the UK. Background and motivation of the PEN&PAD and GALEN projects are presented before the operation of the PEN&PAD user interface is described. A number of issues which have arisen in the development of the PEN&PAD Data Entry System are discussed. PMID:8947757

Adaptable Holders for Arc-Jet Screening Candidate Thermal Protection System Repair Materials

NASA Technical Reports Server (NTRS)

Riccio, Joe; Milhoan, Jim D.

2010-01-01

Reusable holders have been devised for evaluating high-temperature, plasma-resistant re-entry materials, especially fabrics. Typical material samples tested support thermal-protection-system damage repair requiring evaluation prior to re-entry into terrestrial atmosphere. These tests allow evaluation of each material to withstand the most severe predicted re-entry conditions.

Report of the Defense Science Board Task Force on Future Strategic Strike Skills

DTIC Science & Technology

2006-03-01

25 Figure 11: Re - entry Systems – Critical Skills...SKILLS___________________________________________________25 Figure 9: Guidance – Critical Skills Figure 10: Re - entry Systems – Critical Skills ICBMS/BASING...ability to survive intercontinental ballistic missile re - entry and then to operate effectively thereafter, is another area where current skills are

40 CFR 142.34 - Entry and inspection of public water systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Entry and inspection of public water systems. 142.34 Section 142.34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS IMPLEMENTATION Federal Enforcement § 142.34 Entry and inspection of public...

Stakeholder identification of advanced technology opportunities at international ports of entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, S.K.; Icerman, L.

As part of the Advanced Technologies for International and Intermodal Ports of Entry (ATIPE) Project, a diverse group of stakeholders was engaged to help identify problems experienced at inland international border crossings, particularly those at the US-Mexican border. The fundamental issue at international ports of entry is reducing transit time through the required documentation and inspection processes. Examples of other issues or problems, typically manifested as time delays at border crossings, repeatedly mentioned by stakeholders include: (1) lack of document standardization; (2) failure to standardize inspection processes; (3) inadequate information and communications systems; (4) manual fee and tariff collection; (5)more » inconsistency of processes and procedures; and (6) suboptimal cooperation among governmental agencies. Most of these issues can be addressed to some extent by the development of advanced technologies with the objective of allowing ports of entry to become more efficient while being more effective. Three categories of technologies were unambiguously of high priority to port of entry stakeholders: (1) automated documentation; (2) systems integration; and (3) vehicle and cargo tracking. Together, these technologies represent many of the technical components necessary for pre-clearance of freight approaching international ports of entry. Integration of vehicle and cargo tracking systems with port of entry information and communications systems, as well as existing industry legacy systems, should further enable border crossings to be accomplished consistently with optimal processing times.« less

Morbidity, utilization of curative care and service entry point preferences in metropolitan Centro Habana, Cuba.

PubMed

Rodríguez, Armando; Díaz, Addys; Balcindes, Susana; García, René; Vos, Pol De; Stuyft, Patrick Van der

2016-11-03

First-line health services with a primary health care approach are a strong trigger for adequate health-care-seeking behavior. Research on the association between prevalence of chronic diseases and acute illnesses and use of health services emphasizes the importance of socioeconomic determinants in such patterns of utilization. In a cross-sectional study of 408 families in Centro Habana, Cuba, home interviews were conducted between April and June 2010 to analyze socio-demographic determinants of acute and chronic health problems and use of formal health services. Bivariate and logistic regression models were used. 529 persons reported a chronic disease. During the previous month, 155 of the latter reported an exacerbation and 50 experienced an unrelated acute health problem. 107 persons without chronic diseases reported acute health problems. Age was the strongest determinant of chronic disease prevalence. Adult women and the elderly were more likely to report acute problems. Acute patients with underlying chronic disease used formal services more often. No socio-demographic variable was associated with services use or consultation with the family physician. While the family physician is defined as the system's entry-point, this was the case for only 54% of patients that had used formal services, thus compromising the physician's role in counseling patients and summarizing their health issues. The importance of chronic diseases highlights the need to strengthen the family physician's pivotal role. New economic policies in Cuba, stimulating self-employment and private initiative, may increase the strain on the exclusively public health care system. Still, the Cuban health system has demonstrated its ability to adapt to new challenges, and the basic premises of Cuba's health policy are expected to be preserved.

Blood Pressure Control and Risk of Stroke or Systemic Embolism in Patients With Atrial Fibrillation: Results From the Apixaban for Reduction in Stroke and Other Thromboembolic Events in Atrial Fibrillation (ARISTOTLE) Trial.

PubMed

Rao, Meena P; Halvorsen, Sigrun; Wojdyla, Daniel; Thomas, Laine; Alexander, John H; Hylek, Elaine M; Hanna, Michael; Bahit, M Cecilia; Lopes, Renato D; De Caterina, Raffaele; Erol, Cetin; Goto, Shinya; Lanas, Fernando; Lewis, Basil S; Husted, Steen; Gersh, Bernard J; Wallentin, Lars; Granger, Christopher B

2015-12-01

Patients with atrial fibrillation (AF) and hypertension are at high risk for stroke. Previous studies have shown elevated risk of stroke in patients with AF who have a history of hypertension (regardless of blood pressure [BP] control) and in patients with elevated BP. We assessed the association of hypertension and BP control on clinical outcomes. In ARISTOTLE (n=18 201), BP was evaluated as history of hypertension requiring treatment and elevated BP (systolic ≥140 and/or diastolic ≥90 mm Hg) at study entry and any point during the trial. Hazard ratios (HRs) were derived from Cox proportional hazards models including BP as a time-dependent covariate. A total of 15 916 (87.5%) patients had a history of hypertension requiring treatment. In patients with elevated BP measurement at any point during the trial, the rate of stroke or systemic embolism was significantly higher (HR, 1.53; 95% confidence interval [CI], 1.25-1.86), as was hemorrhagic stroke (HR 1.85; 95% CI, 1.26-2.72) and ischemic stroke (HR, 1.50; 95% CI, 1.18-1.90). Rates of major bleeding were lower in patients with a history of hypertension (HR, 0.80; 95% CI, 0.66-0.98) and nonsignificantly lower in patients with elevated BP at study entry (HR, 0.89; 95% CI, 0.77-1.03). The benefit of apixaban versus warfarin on preventing stroke or systemic embolism was consistent among patients with and without a history of hypertension (P interaction=0.27), BP control at baseline (P interaction=0.43), and BP control during the trial (P interaction=0.97). High BP measurement at any point during the trial was independently associated with a substantially higher risk of stroke or systemic embolism. These results strongly support efforts to treat elevated BP as an important strategy to optimally lower risk of stroke in patients with AF. URL: https://ClinicalTrials.gov/. Unique identifier: NCT00412984. © 2015 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Liminality as Thought and Action

ERIC Educational Resources Information Center

Emmanuel, Donna T.

2011-01-01

Turner's (1974) conception of liminal space provides an entry point to look beyond the given and to create opportunities to examine, critique, and challenge the assumptions inherent in many music programs. Building upon his theory of liminality as a place that is "ambiguous, neither here or there, betwixt and between all fixed points of…

50 CFR 660.212 - Fixed gear fishery-prohibitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., Painted Cave, Anacapa Island, Carrington Point, Judith Rock, Skunk Point, Footprint, Gull Island, South... are specific to the limited entry fixed gear fisheries. General groundfish prohibitions are found at § 660.12, subpart C. In addition to the general groundfish prohibitions specified in § 660.12, subpart C...

Situating Nunavut Education with Indigenous Education in Canada

ERIC Educational Resources Information Center

McGregor, Heather Elizabeth

2013-01-01

Recognizing that educational change in Nunavut has not been extensively documented, this article provides an entry point for considering how Nunavut can be better understood and situated with scholarship on Indigenous education in Canada. Comparing the history of education in Nunavut with key turning points in First Nations education, the article…

High-resolution, cryogenic, side-entry type specimen stage

DOEpatents

King, Wayne E.; Merkle, Karl L.

1979-01-01

A high-resolution, cryogenic side-entry type specimen stage includes a copper block within which a specimen can be positioned in the electron beam of an electron microscope, one end of the copper block constituting a specimen heat exchanger, means for directing a flow of helium at cryogenic temperature into the heat exchanger, and electrical leads running from the specimen to the exterior of the microscope for four point D.C. electrical resistivity measurements.

Dissection of the Influenza A Virus Endocytic Routes Reveals Macropinocytosis as an Alternative Entry Pathway

PubMed Central

de Vries, Erik; Tscherne, Donna M.; Wienholts, Marleen J.; Cobos-Jiménez, Viviana; Scholte, Florine; García-Sastre, Adolfo; Rottier, Peter J. M.; de Haan, Cornelis A. M.

2011-01-01

Influenza A virus (IAV) enters host cells upon binding of its hemagglutinin glycoprotein to sialylated host cell receptors. Whereas dynamin-dependent, clathrin-mediated endocytosis (CME) is generally considered as the IAV infection pathway, some observations suggest the occurrence of an as yet uncharacterized alternative entry route. By manipulating entry parameters we established experimental conditions that allow the separate analysis of dynamin-dependent and -independent entry of IAV. Whereas entry of IAV in phosphate-buffered saline could be completely inhibited by dynasore, a specific inhibitor of dynamin, a dynasore-insensitive entry pathway became functional in the presence of fetal calf serum. This finding was confirmed with the use of small interfering RNAs targeting dynamin-2. In the presence of serum, both IAV entry pathways were operational. Under these conditions entry could be fully blocked by combined treatment with dynasore and the amiloride derivative EIPA, the hallmark inhibitor of macropinocytosis, whereas either drug alone had no effect. The sensitivity of the dynamin-independent entry pathway to inhibitors or dominant-negative mutants affecting actomyosin dynamics as well as to a number of specific inhibitors of growth factor receptor tyrosine kinases and downstream effectors thereof all point to the involvement of macropinocytosis in IAV entry. Consistently, IAV particles and soluble FITC-dextran were shown to co-localize in cells in the same vesicles. Thus, in addition to the classical dynamin-dependent, clathrin-mediated endocytosis pathway, IAV enters host cells by a dynamin-independent route that has all the characteristics of macropinocytosis. PMID:21483486

Entry at Venus

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Smith, Brandon

2016-01-01

This is lecture to be given at the IPPW 2016, as part of the 2 day course on Short Course on Destination Venus: Science, Technology and Mission Architectures. The attached presentation material is intended to be introduction to entry aspects of Venus in-situ robotic missions. The presentation introduces the audience to the aerodynamic and aerothermodynamic aspects as well as the loads, both aero and thermal, generated during entry. The course touches upon the system design aspects such as TPS design and both high and low ballistic coefficient entry system concepts that allow the science payload to be protected from the extreme entry environment and yet meet the mission objectives.

NASA CEV Reference Entry GN&C System and Analysis

NASA Technical Reports Server (NTRS)

Munday, S.; Madsen, C.; Broome, J.; Gay, R.; Tigges, M.; Strahan, A.

2007-01-01

As part of its overall objectives, the Orion spacecraft will be required to perform entry and Earth landing functions for Low Earth Orbit (LEO) and Lunar missions. Both of these entry scenarios will begin with separation of the Service Module (SM), making them unique from other Orion mission phases in that only the Command Module (CM) portion of the Crew Exploration Vehicle (CEV) will be involved, requiring a CM specific Guidance, Navigation and Control (GN&C) system. Also common to these mission scenarios will be the need for GN&C to safely return crew (or cargo) to earth within the dynamic thermal and structural constraints of entry and within acceptable accelerations on the crew, utilizing the limited aerodynamic performance of the CM capsule. The lunar return mission could additionally require an initial atmospheric entry designed to support a precision skip and second entry, all to maximize downrange performance and ensure landing in the United States. This paper describes the Entry GN&C reference design, developed by the NASA-led team, that supports these entry scenarios and that was used to validate the Orion System requirements. Description of the reference design will include an overview of the GN&C functions, avionics, and effectors and will relate these to the specific design drivers of the entry scenarios, as well as the desire for commonality in vehicle systems to support the different missions. The discussion will also include the requirement for an Emergency Entry capability beyond that of the nominal performance of the multi-string GNC system, intended to return the crew to the earth in a survivable but unguided manner. Finally, various analyses will be discussed, including those completed to support validation efforts of the current CEV requirements, along with those on-going and planned with the intention to further refine the requirements and to support design development work in conjunction with the prime contractor. Some of these ongoing analyses will include work to size effectors (jets) and fuel budgets, to refine skip entry concepts, to characterize navigation performance and uncertainties, to provide for SM disposal offshore and to identify requirements to support target site selection.

Perspectives of HIV agencies on improving HIV prevention, treatment, and care services in the USA.

PubMed

Khosla, Nidhi; Zachary, Iris

2016-10-01

HIV healthcare services in the USA are made available through a complex funding and delivery system. We present perspectives of HIV agencies on improvements that could lead to an ideal system of HIV prevention, treatment and care. We conducted semi-structured interviews with representatives from 21 HIV agencies offering diverse services in Baltimore, MD. Thematic analysis revealed six key themes: (1) Focusing on HIV prevention, (2) Establishing common entry-points for services, (3) Improving information availability, (4) Streamlining funding streams, (5) Removing competitiveness and (6) Building trust. We recommend that in addition to addressing operational issues regarding service delivery and patient care, initiatives to improve HIV service systems should address underlying social issues such as building trust.

Remote Monitoring Systems for Chronic Patients on Home Hemodialysis: Field Test of a Copresence-Enhanced Design

PubMed Central

Liu, Na; Jung, Younhyun; Arisy, Adani; Nicdao, Mary Ann; Mikaheal, Mary; Baldacchino, Tanya; Khadra, Mohamed; Sud, Kamal

2017-01-01

Background Patients undertaking long-term and chronic home hemodialysis (HHD) are subject to feelings of isolation and anxiety due to the absence of physical contact with their health care professionals and lack of feedback in regards to their dialysis treatments. Therefore, it is important for these patients to feel the “presence” of the health care professionals remotely while on hemodialysis at home for better compliance with the dialysis regime and to feel connected with health care professionals. Objective This study presents an HHD system design for hemodialysis patients with features to enhance patient’s perceived “copresence” with their health care professionals. Various mechanisms to enhance this perception were designed and implemented, including digital logbooks, emotion sharing, and feedback tools. The mechanism in our HHD system aims to address the limitations associated with existing self-monitoring tools for HHD patients. Methods A field trial involving 3 nurses and 74 patients was conducted to test the pilot implementation of the copresence design in our HHD system. Mixed method research was conducted to evaluate the system, including surveys, interviews, and analysis of system data. Results Patients created 2757 entries of dialysis cases during the period of study. Altogether there were 492 entries submitted with “Very Happy” as the emotional status, 2167 entries with a “Happy” status, 56 entries with a “Neutral” status, 18 entries with an “Unhappy” status, and 24 entries with a “Very unhappy” status. Patients felt assured to share their emotions with health care professionals. Health care professionals were able to prioritize the review of the entries based on the emotional status and also felt assured to see patients’ change in mood. There were 989 entries sent with short notes. Entries with negative emotions had a higher percentage of supplementary notes entered compared to the entries with positive and neutral emotions. The qualitative data further showed that the HHD system was able to improve patients’ feelings of being connected with their health care professionals and thus enhance their self-care on HHD. The health care professionals felt better assured with patients’ status with the use of the system and reported improved productivity and satisfaction with the copresence enhancement mechanism. The survey on the system usability indicated a high level of satisfaction among patients and nurses. Conclusions The copresence enhancement design complements the conventional use of a digitized HHD logbook and will further benefit the design of future telehealth systems. PMID:28851680

Time-varying Entry Heating Profile Replication with a Rotating Arc Jet Test Article

NASA Technical Reports Server (NTRS)

Grinstead, Jay Henderson; Venkatapathy, Ethiraj; Noyes, Eric A.; Mach, Jeffrey J.; Empey, Daniel M.; White, Todd R.

2014-01-01

A new approach for arc jet testing of thermal protection materials at conditions approximating the time-varying conditions of atmospheric entry was developed and demonstrated. The approach relies upon the spatial variation of heat flux and pressure over a cylindrical test model. By slowly rotating a cylindrical arc jet test model during exposure to an arc jet stream, each point on the test model will experience constantly changing applied heat flux. The predicted temporal profile of heat flux at a point on a vehicle can be replicated by rotating the cylinder at a prescribed speed and direction. An electromechanical test model mechanism was designed, built, and operated during an arc jet test to demonstrate the technique.

The relative effects of entry parameters on thermal protection system weight. [space shuttle orbiters

NASA Technical Reports Server (NTRS)

Hirasaki, P. N.

1971-01-01

Shielding a spacecraft from the severe thermal environment of an atmospheric entry requires a sophisticated thermal protection system (TPS). Thermal computer program models were developed for two such TPS designs proposed for the space shuttle orbiter. The multilayer systems, a reusable surface insulation TPS, and a re-radiative metallic skin TPS, were sized for a cross-section of trajectories in the entry corridor. This analysis indicates the relative influence of the entry parameters on the weight of each TPS concept. The results are summarized graphically. The trajectory variables considered were down-range, cross-range, orbit inclination, entry interface velocity and flight path angle, maximum heating rate level, angle of attack, and ballistic coefficient. Variations in cross-range and flight path angle over the ranges considered had virtually no effect on the required entry TPS weight. The TPS weight was significantly more sensitive to variations in angle of attack than to dispersions in the other trajectory considered.

Rapid Nipah virus entry into the central nervous system of hamsters via the olfactory route

PubMed Central

Munster, Vincent J.; Prescott, Joseph B.; Bushmaker, Trenton; Long, Dan; Rosenke, Rebecca; Thomas, Tina; Scott, Dana; Fischer, Elizabeth R.; Feldmann, Heinz; de Wit, Emmie

2012-01-01

Encephalitis is a hallmark of Nipah virus (NiV) infection in humans. The exact route of entry of NiV into the central nervous system (CNS) is unknown. Here, we performed a spatio-temporal analysis of NiV entry into the CNS of hamsters. NiV initially predominantly targeted the olfactory epithelium in the nasal turbinates. From there, NiV infected neurons were visible extending through the cribriform plate into the olfactory bulb, providing direct evidence of rapid CNS entry. Subsequently, NiV disseminated to the olfactory tubercle and throughout the ventral cortex. Transmission electron microscopy on brain tissue showed extravasation of plasma cells, neuronal degeneration and nucleocapsid inclusions in affected tissue and axons, providing further evidence for axonal transport of NiV. NiV entry into the CNS coincided with the occurrence of respiratory disease, suggesting that the initial entry of NiV into the CNS occurs simultaneously with, rather than as a result of, systemic virus replication. PMID:23071900

Development Of A Combined Sensor System For Atmospheric Entry Missions

NASA Astrophysics Data System (ADS)

Preci, A.; Eswein, N.; Herdrich, G.; Fasoulas, S.; Roser, H.-P.; Auweter-Kurtz, M.

2011-05-01

The payload COMPARE is developed at the Institute of Space Systems for various entry scenarios. It was previously laid out for a Mars entry mission and afterwards redesigned for the German Aerospace Centre suborbital re-entry mission SHEFEX II, which had its successful roll-out in July 2010 and is due to be launched in September 2011. The sensor system aims to simultaneously measure the temperature of the thermal protection shield, the radiation from the plasma and the pressure. The most recent development of COMPARE is a combined sensor system for ablative thermal protection systems enabling a separation of the radiative heat flux from the total heat flux. Furthermore, it enables also the detection of specific species in the plasma by measuring the radiative heat flux at a defined wavelength range. In the frame of an ESA funded project a breadboard has been build and tested in a plasma wind tunnel in order to prove the feasibility of such a sensor system for upcoming entry missions. Results of these measurements are presented in this work.

31 CFR 354.1 - Definitions of terms.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING BOOK-ENTRY SECURITIES OF THE... the claimant for another Person to hold, transfer, or deal with the Security. (b) Book-entry Sallie Mae Security means a Sallie Mae Security issued or maintained in the Book-entry System. (c) Book-entry...

31 CFR 337.6 - Conversions to book-entry.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false Conversions to book-entry. 337.6... FEDERAL HOUSING ADMINISTRATION DEBENTURES Certificated Debentures § 337.6 Conversions to book-entry. Upon implementation of the book-entry debenture system, to be announced in advance by separate public notice, all new...

31 CFR 337.6 - Conversions to book-entry.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false Conversions to book-entry. 337.6... HOUSING ADMINISTRATION DEBENTURES Certificated Debentures § 337.6 Conversions to book-entry. Upon implementation of the book-entry debenture system, to be announced in advance by separate public notice, all new...

31 CFR 337.6 - Conversions to book-entry.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false Conversions to book-entry. 337.6... HOUSING ADMINISTRATION DEBENTURES Certificated Debentures § 337.6 Conversions to book-entry. Upon implementation of the book-entry debenture system, to be announced in advance by separate public notice, all new...

31 CFR 337.6 - Conversions to book-entry.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 2 2013-07-01 2013-07-01 false Conversions to book-entry. 337.6... HOUSING ADMINISTRATION DEBENTURES Certificated Debentures § 337.6 Conversions to book-entry. Upon implementation of the book-entry debenture system, to be announced in advance by separate public notice, all new...

31 CFR 337.6 - Conversions to book-entry.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Conversions to book-entry. 337.6... HOUSING ADMINISTRATION DEBENTURES Certificated Debentures § 337.6 Conversions to book-entry. Upon implementation of the book-entry debenture system, to be announced in advance by separate public notice, all new...

Trajectory optimization study of a lifting body re-entry vehicle for medium to intermediate range applications

NASA Astrophysics Data System (ADS)

Rizvi, S. Tauqeer ul Islam; Linshu, He; ur Rehman, Tawfiq; Rafique, Amer Farhan

2012-11-01

A numerical optimization study of lifting body re-entry vehicles is presented for nominal as well as shallow entry conditions for Medium and Intermediate Range applications. Due to the stringent requirement of a high degree of accuracy for conventional vehicles, lifting re-entry can be used to attain the impact at the desired terminal flight path angle and speed and thus can potentially improve accuracy of the re-entry vehicle. The re-entry of a medium range and intermediate range vehicles is characterized by very high negative flight path angle and low re-entry speed as compared to a maneuverable re-entry vehicle or a common aero vehicle intended for an intercontinental range. Highly negative flight path angles at the re-entry impose high dynamic pressure as well as heat loads on the vehicle. The trajectory studies are carried out to maximize the cross range of the re-entry vehicle while imposing a maximum dynamic pressure constraint of 350 KPa with a 3 MW/m2 heat rate limit. The maximum normal acceleration and the total heat load experienced by the vehicle at the stagnation point during the maneuver have been computed for the vehicle for possible future conceptual design studies. It has been found that cross range capability of up to 35 km can be achieved with a lifting-body design within the heat rate and the dynamic pressure boundary at normal entry conditions. For shallow entry angle of -20 degree and intermediate ranges a cross range capability of up to 250 km can be attained for a lifting body design with less than 10 percent loss in overall range. The normal acceleration also remains within limits. The lifting-body results have also been compared with wing-body results at shallow entry condition. An hp-adaptive pseudo-spectral method has been used for constrained trajectory optimization.

Mars Entry Atmospheric Data System Modeling, Calibration, and Error Analysis

NASA Technical Reports Server (NTRS)

Karlgaard, Christopher D.; VanNorman, John; Siemers, Paul M.; Schoenenberger, Mark; Munk, Michelle M.

2014-01-01

The Mars Science Laboratory (MSL) Entry, Descent, and Landing Instrumentation (MEDLI)/Mars Entry Atmospheric Data System (MEADS) project installed seven pressure ports through the MSL Phenolic Impregnated Carbon Ablator (PICA) heatshield to measure heatshield surface pressures during entry. These measured surface pressures are used to generate estimates of atmospheric quantities based on modeled surface pressure distributions. In particular, the quantities to be estimated from the MEADS pressure measurements include the dynamic pressure, angle of attack, and angle of sideslip. This report describes the calibration of the pressure transducers utilized to reconstruct the atmospheric data and associated uncertainty models, pressure modeling and uncertainty analysis, and system performance results. The results indicate that the MEADS pressure measurement system hardware meets the project requirements.

Method for data compression by associating complex numbers with files of data values

DOEpatents

Feo, J.T.; Hanks, D.C.; Kraay, T.A.

1998-02-10

A method for compressing data for storage or transmission is disclosed. Given a complex polynomial and a value assigned to each root, a root generated data file (RGDF) is created, one entry at a time. Each entry is mapped to a point in a complex plane. An iterative root finding technique is used to map the coordinates of the point to the coordinates of one of the roots of the polynomial. The value associated with that root is assigned to the entry. An equational data compression (EDC) method reverses this procedure. Given a target data file, the EDC method uses a search algorithm to calculate a set of m complex numbers and a value map that will generate the target data file. The error between a simple target data file and generated data file is typically less than 10%. Data files can be transmitted or stored without loss by transmitting the m complex numbers, their associated values, and an error file whose size is at most one-tenth of the size of the input data file. 4 figs.

Method for data compression by associating complex numbers with files of data values

DOEpatents

Feo, John Thomas; Hanks, David Carlton; Kraay, Thomas Arthur

1998-02-10

A method for compressing data for storage or transmission. Given a complex polynomial and a value assigned to each root, a root generated data file (RGDF) is created, one entry at a time. Each entry is mapped to a point in a complex plane. An iterative root finding technique is used to map the coordinates of the point to the coordinates of one of the roots of the polynomial. The value associated with that root is assigned to the entry. An equational data compression (EDC) method reverses this procedure. Given a target data file, the EDC method uses a search algorithm to calculate a set of m complex numbers and a value map that will generate the target data file. The error between a simple target data file and generated data file is typically less than 10%. Data files can be transmitted or stored without loss by transmitting the m complex numbers, their associated values, and an error file whose size is at most one-tenth of the size of the input data file.

Comparison of viscous-shock-layer solutions by time-asymptotic and steady-state methods. [flow distribution around a Jupiter entry probe

NASA Technical Reports Server (NTRS)

Gupta, R. N.; Moss, J. N.; Simmonds, A. L.

1982-01-01

Two flow-field codes employing the time- and space-marching numerical techniques were evaluated. Both methods were used to analyze the flow field around a massively blown Jupiter entry probe under perfect-gas conditions. In order to obtain a direct point-by-point comparison, the computations were made by using identical grids and turbulence models. For the same degree of accuracy, the space-marching scheme takes much less time as compared to the time-marching method and would appear to provide accurate results for the problems with nonequilibrium chemistry, free from the effect of local differences in time on the final solution which is inherent in time-marching methods. With the time-marching method, however, the solutions are obtainable for the realistic entry probe shapes with massive or uniform surface blowing rates; whereas, with the space-marching technique, it is difficult to obtain converged solutions for such flow conditions. The choice of the numerical method is, therefore, problem dependent. Both methods give equally good results for the cases where results are compared with experimental data.

Cardiolipin Fatty Acid Remodeling Regulates Mitochondrial Function by Modifying the Electron Entry Point in the Respiratory Chain

PubMed Central

Vergeade, Aurelia; Bertram, Clinton C.; Bikineyeva, Alfiya T.; Zackert, William E.; Zinkel, Sandra S.; May, James M.; Dikalov, Sergey I.; Roberts, L. Jackson; Boutaud, Olivier

2016-01-01

Modifications of cardiolipin (CL) levels or compositions are associated with changes in mitochondrial function in a wide range of pathologies. We have made the discovery that acetaminophen remodels CL fatty acids composition from tetralinoleoyl to linoleoyltrioleoyl-CL, a remodeling that is associated with decreased mitochondrial respiration. Our data show that CL remodeling causes a shift in electron entry from complex II to the β-oxidation electron transfer flavoprotein quinone oxidoreductase (ETF/QOR) pathway. These data demonstrate that electron entry in the respiratory chain is regulated by CL fatty acid composition and provide proof-of-concept that pharmacological intervention can be used to modify CL composition. PMID:27085476

Design and fabrication of brazed Rene 41 honeycomb sandwich structural panels for advanced space transportation systems

NASA Technical Reports Server (NTRS)

Hepler, A. K.; Swegle, A. R.

1981-01-01

The design and fabrication of two large brazed Rene 41 honeycomb panels, the establishment of a test plan, the design and fabrication of a test fixture to subject the panels to cyclic thermal gradients and mechanical loads equivalent to those imposed on an advanced space transportation vehicle during its boost and entry trajectories are discussed. The panels will be supported at four points, creating three spans. The outer spans are 45.7 cm (18 in.) and the center span 76.2 cm (30 in). Specimen width is 30.5 cm (12 in.). The panels were primarily designed by boost conditions simulated by subjecting the panels to liquid nitrogen, 77K (-320 F) on one side and 455K (360 F) on the other side and by mechanically imposing loads representing vehicle fuel pressure loads. Entry conditions were simulated by radiant heating to 1034K (1400 F). The test program subjected the panels to 500 boost thermal conditions. Results are presented.

AFLOW-SYM: platform for the complete, automatic and self-consistent symmetry analysis of crystals.

PubMed

Hicks, David; Oses, Corey; Gossett, Eric; Gomez, Geena; Taylor, Richard H; Toher, Cormac; Mehl, Michael J; Levy, Ohad; Curtarolo, Stefano

2018-05-01

Determination of the symmetry profile of structures is a persistent challenge in materials science. Results often vary amongst standard packages, hindering autonomous materials development by requiring continuous user attention and educated guesses. This article presents a robust procedure for evaluating the complete suite of symmetry properties, featuring various representations for the point, factor and space groups, site symmetries and Wyckoff positions. The protocol determines a system-specific mapping tolerance that yields symmetry operations entirely commensurate with fundamental crystallographic principles. The self-consistent tolerance characterizes the effective spatial resolution of the reported atomic positions. The approach is compared with the most used programs and is successfully validated against the space-group information provided for over 54 000 entries in the Inorganic Crystal Structure Database (ICSD). Subsequently, a complete symmetry analysis is applied to all 1.7+ million entries of the AFLOW data repository. The AFLOW-SYM package has been implemented in, and made available for, public use through the automated ab initio framework AFLOW.

On bifurcation delay: An alternative approach using Geometric Singular Perturbation Theory

NASA Astrophysics Data System (ADS)

Hsu, Ting-Hao

2017-02-01

To explain the phenomenon of bifurcation delay, which occurs in planar systems of the form x ˙ = ɛf (x , z , ɛ), z ˙ = g (x , z , ɛ) z, where f (x , 0 , 0) > 0 and g (x , 0 , 0) changes sign at least once on the x-axis, we use the Exchange Lemma in Geometric Singular Perturbation Theory to track the limiting behavior of the solutions. Using the trick of extending dimension to overcome the degeneracy at the turning point, we show that the limiting attracting and repulsion points are given by the well-known entry-exit function, and the minimum of z on the trajectory is of order exp ⁡ (- 1 / ɛ). Also we prove smoothness of the return map up to arbitrary finite order in ɛ.

Command generator tracker based direct model reference adaptive tracking guidance for Mars atmospheric entry

NASA Astrophysics Data System (ADS)

Li, Shuang; Peng, Yuming

2012-01-01

In order to accurately deliver an entry vehicle through the Martian atmosphere to the prescribed parachute deployment point, active Mars entry guidance is essential. This paper addresses the issue of Mars atmospheric entry guidance using the command generator tracker (CGT) based direct model reference adaptive control to reduce the adverse effect of the bounded uncertainties on atmospheric density and aerodynamic coefficients. Firstly, the nominal drag acceleration profile meeting a variety of constraints is planned off-line in the longitudinal plane as the reference model to track. Then, the CGT based direct model reference adaptive controller and the feed-forward compensator are designed to robustly track the aforementioned reference drag acceleration profile and to effectively reduce the downrange error. Afterwards, the heading alignment logic is adopted in the lateral plane to reduce the crossrange error. Finally, the validity of the guidance algorithm proposed in this paper is confirmed by Monte Carlo simulation analysis.

Splitting of the Proximal Femur With a New Femoral Nail

DTIC Science & Technology

2010-04-01

should be exercised with the use of new implants that require a change in customary technique. In addition, some concern must be raised by the amount of...the potential for gluteus medius tendon injury,8 whereas other authors have found greater soft-tissue injury by inserting a nail through the...Entry Femoral Nail (Synthes USA, Paoli, PA) moved the entry point further lateral (10 degrees) and distal to completely avoid the gluteus medius tendon

Midwives and the Computerization of Perinatal Data Entry: The Theory of Beneficial Engagement.

PubMed

Craswell, Alison; Moxham, Lorna; Broadbent, Marc

2016-10-01

Theory building in nursing and midwifery both to explain and inform practice is important to advance these professions via provision of a theoretical foundation. This research explored the process of perinatal data entry undertaken by midwives to explore the impact of the movement from paper to computer collection of data. Use of grounded theory methodology enabled theory building, leading to a theoretical understanding of the phenomenon and development of the Theory of Beneficial Engagement grounded in the data. Methods involved in-depth semistructured interviews with 15 users of perinatal data systems. Participants were recruited from 12 different healthcare locations and were utilizing three different electronic systems for data entry. The research question that guided the study focused on examining the influences of using the computer for perinatal data entry. Findings indicated that qualities particular to some midwives denoted engagement with perinatal data entry, suggesting a strong desire to enter complete, timely, and accurate data. The Theory of Beneficial Engagement provides a model of user engagement with systems for perinatal data entry consistent with other theories of engagement. The theory developed describes this phenomenon in a simple, elegant manner that can be applied to other areas where mandatory data entry is undertaken.

The anatomy of decision support during inpatient care provider order entry (CPOE): Empirical observations from a decade of CPOE experience at Vanderbilt

PubMed Central

Miller, Randolph A.; Waitman, Lemuel R.; Chen, Sutin; Rosenbloom, S. Trent

2006-01-01

The authors describe a pragmatic approach to the introduction of clinical decision support at the point of care, based on a decade of experience in developing and evolving Vanderbilt’s inpatient “WizOrder” care provider order entry (CPOE) system. The inpatient care setting provides a unique opportunity to interject CPOE-based decision support features that restructure clinical workflows, deliver focused relevant educational materials, and influence how care is delivered to patients. From their empirical observations, the authors have developed a generic model for decision support within inpatient CPOE systems. They believe that the model’s utility extends beyond Vanderbilt, because it is based on characteristics of end-user workflows and on decision support considerations that are common to a variety of inpatient settings and CPOE systems. The specific approach to implementing a given clinical decision support feature within a CPOE system should involve evaluation along three axes: what type of intervention to create (for which the authors describe 4 general categories); when to introduce the intervention into the user’s workflow (for which the authors present 7 categories), and how disruptive, during use of the system, the intervention might be to end-users’ workflows (for which the authors describe 6 categories). Framing decision support in this manner may help both developers and clinical end-users plan future alterations to their systems when needs for new decision support features arise. PMID:16290243

Genesis Sample Return Capsule Overview

NASA Technical Reports Server (NTRS)

Willcockson, Bill

2005-01-01

I. Simple Entry Capsule Concept: a) Spin-Stabilized/No Active Control Systems; b) Ballistic Entry for 11.04 km/sec Velocity; c) No Heatshield Separation During Entry; d) Parachute Deploy via g-Switch + Timer. II. Stardust Design Inheritance a) Forebody Shape; b) Seal Concepts; c) Parachute Deploy Control; d) Utah Landing Site (UTTR). III. TPS Systems a) Heatshield - Carbon-Carbon - First Planetary Entry; b) Backshell - SLA-561V - Flight Heritage from Pathfinder, MER; d) Forebody Structural Penetrations Aerothermal and TPS Design Process has the Same Methodology as Used for Pathfinder, MER Flight Vehicles.

Predictive Modeling for NASA Entry, Descent and Landing Missions

NASA Technical Reports Server (NTRS)

Wright, Michael

2016-01-01

Entry, Descent and Landing (EDL) Modeling and Simulation (MS) is an enabling capability for complex NASA entry missions such as MSL and Orion. MS is used in every mission phase to define mission concepts, select appropriate architectures, design EDL systems, quantify margin and risk, ensure correct system operation, and analyze data returned from the entry. In an environment where it is impossible to fully test EDL concepts on the ground prior to use, accurate MS capability is required to extrapolate ground test results to expected flight performance.

Tailoring Retention Theories to Meet the Needs of Rural Appalachian Community College Students

ERIC Educational Resources Information Center

Hlinka, Karen R.

2017-01-01

Objective: Traditional-age students attending a rural community college in Kentucky's Appalachian region were interviewed, along with faculty members and administrators, to identify phenomena serving as sources of encouragement or as barriers to retention from the point of entry to the point of transfer. Method: Students' perspectives were…

Transition Effects on Heating in the Wake of a Blunt Body

NASA Technical Reports Server (NTRS)

Hollis, Brian R.; Perkins, John N.

1997-01-01

A series of aerodynamic heating tests was conducted on a 70-deg sphere-cone planetary entry vehicle model in a Mach 10 perfect-gas wind tunnel at freestream Reynolds numbers based on diameter of 8.23x104 to 3.15x105. Surface heating distributions were determined from temperature time-histories measured on the model and on its support sting using thin-film resistance gages. The experimental heating data were compared to computations made using an axisymmetric/2D, laminar, perfect-gas Navier-Stokes solver. Agreement between computational and experimental heating distributions to within, or slightly greater than, the experimental uncertainty was obtained on the forebody and afterbody of the entry vehicle as well as on the sting upstream of the free-shear-layer reattachment point. However, the distributions began to diverge near the reattachment point, with the experimental heating becoming increasingly greater than the computed heating with distance downstream from the reattachment point. It was concluded that this divergence was due to transition of the wake free shear layer just upstream of the reattachment point on the sting.

Port-of-entry advanced sorting system (PASS) operational test

DOT National Transportation Integrated Search

1998-12-01

In 1992 the Oregon Department of Transportation undertook an operational test of the Port-of-Entry Advanced Sorting System (PASS), which uses a two-way communication automatic vehicle identification system, integrated with weigh-in-motion, automatic ...

Multi-Mission System Analysis for Planetary Entry (M-SAPE) Version 1

NASA Technical Reports Server (NTRS)

Samareh, Jamshid; Glaab, Louis; Winski, Richard G.; Maddock, Robert W.; Emmett, Anjie L.; Munk, Michelle M.; Agrawal, Parul; Sepka, Steve; Aliaga, Jose; Zarchi, Kerry;

MAPS: The Organization of a Spatial Database System Using Imagery, Terrain, and Map Data

DTIC Science & Technology

1983-06-01

segments which share the same pixel position. Finally, in any largo system, a logical partitioning of the database must be performed in order to avoid...34theodore roosevelt memoria entry 0; entry 1: Virginia ’northwest Washington* 2 en 11" ies for "crossover" for ’theodore roosevelt memor i entry 0

The Viking parachute qualification test technique.

NASA Technical Reports Server (NTRS)

Raper, J. L.; Lundstrom, R. R.; Michel, F. C.

1973-01-01

The parachute system for NASA's Viking '75 Mars lander was flight qualified in four high-altitude flight tests at the White Sands Missile range (WSMR). A balloon system lifted a full-scale simulated Viking spacecraft to an altitude where a varying number of rocket motors were used to propel the high drag, lifting test vehicle to test conditions which would simulate the range of entry conditions expected at Mars. A ground-commanded cold gas pointing system located on the balloon system provided powered vehicle azimuth control to insure that the flight trajectory remained within the WSMR boundaries. A unique ground-based computer-radar system was employed to monitor inflight performance of the powered vehicle and insure that command ignition of the parachute mortar occurred at the required test conditions of Mach number and dynamic pressure. Performance data were obtained from cameras, telemetry, and radar.

Endoscopic Endonasal Transclival Approach to the Ventral Brainstem: Anatomic Study of the Safe Entry Zones Combining Fiber Dissection Technique with 7 Tesla Magnetic Resonance Guided Neuronavigation.

PubMed

Weiss, Alessandro; Perrini, Paolo; De Notaris, Matteo; Soria, Guadalupe; Carlos, Alarcon; Castagna, Maura; Lutzemberger, Lodovico; Santonocito, Orazio Santo; Catapano, Giuseppe; Kassam, Amin; Galino, Alberto Prats

2018-05-10

Treatment of intrinsic lesions of the ventral brainstem is a surgical challenge that requires complex skull base antero- and posterolateral approaches. More recently, endoscopic endonasal transclival approach (EETA) has been reported in the treatment of selected ventral brainstem lesions. In this study we explored the endoscopic ventral brainstem anatomy with the aim to describe the degree of exposure of the ventral safe entry zones. In addition, we used a newly developed method combining traditional white matter dissection with high-resolution 7T magnetic resonance imaging (MRI) of the same specimen coregistered using a neuronavigation system. Eight fresh-frozen latex-injected cadaver heads underwent EETA. Additional 8 formalin-fixed brainstems were dissected using Klingler technique guided by ultra-high resolution MRI. The EETA allows a wide exposure of different safe entry zones located on the ventral brainstem: the exposure of perioculomotor zone requires pituitary transposition and can be hindered by superior cerebellar artery. The peritrigeminal zone was barely visible and its exposure required an extradural anterior petrosectomy. The anterolateral sulcus of the medulla was visible in most of specimens, although its close relationship with the corticospinal tract makes it suboptimal as an entry point for intrinsic lesions. In all cases, the use of 7T-MRI allowed the identification of tiny fiber bundles, improving the quality of the dissection. Exposure of the ventral brainstem with EETA requires mastering surgical maneuvers, including pituitary transposition and extradural petrosectomy. The correlation of fiber dissection with 7T-MRI neuronavigation significantly improves the understanding of the brainstem anatomy.

30 CFR 75.326 - Mean entry air velocity.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Mean entry air velocity. 75.326 Section 75.326... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.326 Mean entry air velocity. In exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per minute...

30 CFR 75.326 - Mean entry air velocity.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Mean entry air velocity. 75.326 Section 75.326... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.326 Mean entry air velocity. In exhausting face ventilation systems, the mean entry air velocity shall be at least 60 feet per minute...

Safe landing area determination for a Moon lander by reachability analysis

NASA Astrophysics Data System (ADS)

Arslantaş, Yunus Emre; Oehlschlägel, Thimo; Sagliano, Marco

2016-11-01

In the last decades developments in space technology paved the way to more challenging missions like asteroid mining, space tourism and human expansion into the Solar System. These missions result in difficult tasks such as guidance schemes for re-entry, landing on celestial bodies and implementation of large angle maneuvers for spacecraft. There is a need for a safety system to increase the robustness and success of these missions. Reachability analysis meets this requirement by obtaining the set of all achievable states for a dynamical system starting from an initial condition with given admissible control inputs of the system. This paper proposes an algorithm for the approximation of nonconvex reachable sets (RS) by using optimal control. Therefore subset of the state space is discretized by equidistant points and for each grid point a distance function is defined. This distance function acts as an objective function for a related optimal control problem (OCP). Each infinite dimensional OCP is transcribed into a finite dimensional Nonlinear Programming Problem (NLP) by using Pseudospectral Methods (PSM). Finally, the NLPs are solved using available tools resulting in approximated reachable sets with information about the states of the dynamical system at these grid points. The algorithm is applied on a generic Moon landing mission. The proposed method computes approximated reachable sets and the attainable safe landing region with information about propellant consumption and time.

Student Moon Observations and Spatial-Scientific Reasoning

NASA Astrophysics Data System (ADS)

Cole, Merryn; Wilhelm, Jennifer; Yang, Hongwei

2015-07-01

Relationships between sixth grade students' moon journaling and students' spatial-scientific reasoning after implementation of an Earth/Space unit were examined. Teachers used the project-based Realistic Explorations in Astronomical Learning curriculum. We used a regression model to analyze the relationship between the students' Lunar Phases Concept Inventory (LPCI) post-test score variables and several predictors, including moon journal score, number of moon journal entries, student gender, teacher experience, and pre-test score. The model shows that students who performed better on moon journals, both in terms of overall score and number of entries, tended to score higher on the LPCI. For every 1 point increase in the overall moon journal score, participants scored 0.18 points (out of 20) or nearly 1% point higher on the LPCI post-test when holding constant the effects of the other two predictors. Similarly, students who increased their scores by 1 point in the overall moon journal score scored approximately 1% higher in the Periodic Patterns (PP) and Geometric Spatial Visualization (GSV) domains of the LPCI. Also, student gender and teacher experience were shown to be significant predictors of post-GSV scores on the LPCI in addition to the pre-test scores, overall moon journal score, and number of entries that were also significant predictors on the LPCI overall score and the PP domain. This study is unique in the purposeful link created between student moon observations and spatial skills. The use of moon journals distinguishes this study further by fostering scientific observation along with skills from across science, technology, engineering, and mathematics disciplines.

Using water and sanitation as an entry point to fight poverty and respond to HIV/AIDS: The case of Isulabasha Small Medium Enterprise

NASA Astrophysics Data System (ADS)

Manase, G.; Nkuna, Z.; Ngorima, E.

South Africa is faced by a number of challenges that include low water and sanitation coverage in rural and peri-urban areas, high unemployment and increasing inequality between the rich and the poor as indicated by a Gini coefficient of 0.77; the second highest inequality in the world after Brazil. The situation is compounded by high HIV prevalence with South Africa having the largest HIV infection in the world. This case study demonstrates how water and sanitation is used as an entry point to address these major challenges and to empower communities. The project has two main components: the Small Medium Enterprise (SME) that trades in water and sanitation facilities and a community garden that ensures food security and nutrition for people living with HIV/AIDS. Income generated through these activities is ploughed back into the community through construction of sanitation facilities, maintenance of water pipes and paying school fees for orphans. In addition to creating employment, the project has also empowered the community to mobilise and address other challenges such as gender, child abuse and crime. The case study identifies weaknesses with projects designed solely to provide domestic drinking water and sanitation and calls for an integrated approach that uses water and sanitation as an entry point to unlock opportunities and empower the targeted communities.

Accuracy Evaluation of a Stereolithographic Surgical Template for Dental Implant Insertion Using 3D Superimposition Protocol.

PubMed

Cristache, Corina Marilena; Gurbanescu, Silviu

2017-01-01

of this study was to evaluate the accuracy of a stereolithographic template, with sleeve structure incorporated into the design, for computer-guided dental implant insertion in partially edentulous patients. Sixty-five implants were placed in twenty-five consecutive patients with a stereolithographic surgical template. After surgery, digital impression was taken and 3D inaccuracy of implants position at entry point, apex, and angle deviation was measured using an inspection tool software. Mann-Whitney U test was used to compare accuracy between maxillary and mandibular surgical guides. A p value < .05 was considered significant. Mean (and standard deviation) of 3D error at the entry point was 0.798 mm (±0.52), at the implant apex it was 1.17 mm (±0.63), and mean angular deviation was 2.34 (±0.85). A statistically significant reduced 3D error was observed at entry point p = .037, at implant apex p = .008, and also in angular deviation p = .030 in mandible when comparing to maxilla. The surgical template used has proved high accuracy for implant insertion. Within the limitations of the present study, the protocol for comparing a digital file (treatment plan) with postinsertion digital impression may be considered a useful procedure for assessing surgical template accuracy, avoiding radiation exposure, during postoperative CBCT scanning.

Considerations for setting up an order entry system for nuclear medicine tests.

PubMed

Hara, Narihiro; Onoguchi, Masahisa; Nishida, Toshihiko; Honda, Minoru; Houjou, Osamu; Yuhi, Masaru; Takayama, Teruhiko; Ueda, Jun

2007-12-01

Integrating the Healthcare Enterprise-Japan (IHE-J) was established in Japan in 2001 and has been working to standardize health information and make it accessible on the basis of the fundamental Integrating Healthcare Enterprise (IHE) specifications. However, because specialized operations are used in nuclear medicine tests, online sharing of patient information and test order information from the order entry system as shown by the scheduled workflow (SWF) is difficult, making information inconsistent throughout the facility and uniform management of patient information impossible. Therefore, we examined the basic design (subsystem design) for order entry systems, which are considered an important aspect of information management for nuclear medicine tests and needs to be consistent with the system used throughout the rest of the facility. There are many items that are required by the subsystem when setting up an order entry system for nuclear medicine tests. Among these items, those that are the most important in the order entry system are constructed using exclusion settings, because of differences in the conditions for using radiopharmaceuticals and contrast agents and appointment frame settings for differences in the imaging method and test items. To establish uniform management of patient information for nuclear medicine tests throughout the facility, it is necessary to develop an order entry system with exclusion settings and appointment frames as standard features. Thereby, integration of health information with the Radiology Information System (RIS) or Picture Archiving Communication System (PACS) based on Digital Imaging Communications in Medicine (DICOM) standards and real-time health care assistance can be attained, achieving the IHE agenda of improving health care service and efficiently sharing information.

Trends in Planetary Data Analysis. Executive summary of the Planetary Data Workshop

NASA Technical Reports Server (NTRS)

Evans, N.

1984-01-01

Planetary data include non-imaging remote sensing data, which includes spectrometric, radiometric, and polarimetric remote sensing observations. Also included are in-situ, radio/radar data, and Earth based observation. Also discussed is development of a planetary data system. A catalog to identify observations will be the initial entry point for all levels of users into the data system. There are seven distinct data support services: encyclopedia, data index, data inventory, browse, search, sample, and acquire. Data systems for planetary science users must provide access to data, process, store, and display data. Two standards will be incorporated into the planetary data system: Standard communications protocol and Standard format data unit. The data system configuration must combine a distributed system with those of a centralized system. Fiscal constraints have made prioritization important. Activities include saving previous mission data, planning/cost analysis, and publishing of proceedings.

The ubiquitin-proteasome system is essential for the productive entry of Japanese encephalitis virus.

PubMed

Wang, Shaobo; Liu, Haibin; Zu, Xiangyang; Liu, Yang; Chen, Liman; Zhu, Xueqin; Zhang, Leike; Zhou, Zheng; Xiao, Gengfu; Wang, Wei

2016-11-01

The host-virus interaction during the cellular entry of Japanese encephalitis virus (JEV) is poorly characterized. The ubiquitin-proteasome system (UPS), the major intracellular proteolytic pathway, mediates diverse cellular processes, including endocytosis and signal transduction, which may be involved in the entry of virus. Here, we showed that the proteasome inhibitors, MG132 and lactacystin, impaired the productive entry of JEV by effectively interfering with viral intracellular trafficking at the stage between crossing cell membrane and the initial translation of the viral genome after uncoating. Using confocal microscopy, it was demonstrated that a proportion of the internalized virions were misdirected to lysosomes following treatment with MG132, resulting in non-productive entry. In addition, using specific siRNAs targeting ubiquitin, we verified that protein ubiquitination was involved in the entry of JEV. Overall, our study demonstrated the UPS is essential for the productive entry of JEV and might represent a potential antiviral target for JEV infection. Copyright © 2016 Elsevier Inc. All rights reserved.

Method and system for entering data within a flight plan entry field

NASA Technical Reports Server (NTRS)

Gibbs, Michael J. (Inventor); Van Omen, Debi (Inventor); Adams, Michael B. (Inventor); Chase, Karl L. (Inventor); Lewis, Daniel E. (Inventor); McCrobie, Daniel E. (Inventor)

2005-01-01

The present invention provides systems, apparatus and methods for entering data into a flight plan entry field which facilitates the display and editing of aircraft flight-plan data. In one embodiment, the present invention provides a method for entering multiple waypoint and procedure identifiers at once within a single a flight plan entry field. In another embodiment, the present invention provides for the partial entry of any waypoint or procedure identifiers, and thereafter relating the identifiers with an aircraft's flight management system to anticipate the complete text entry for display. In yet another embodiment, the present invention discloses a method to automatically provide the aircraft operator with selectable prioritized arrival and approach routing identifiers by a single manual selection. In another embodiment, the present invention is a method for providing the aircraft operator with selectable alternate patterns to a new runway.

Aerocapture Inflatable Decelerator for Planetary Entry

NASA Technical Reports Server (NTRS)

Reza, Sajjad; Hund, Richard; Kustas, Frank; Willcockson, William; Songer, Jarvis; Brown, Glen

2007-01-01

Forward Attached Inflatable Decelerators, more commonly known as inflatable aeroshells, provide an effective, cost efficient means of decelerating spacecrafts by using atmospheric drag for aerocapture or planetary entry instead of conventional liquid propulsion deceleration systems. Entry into planetary atmospheres results in significant heating and aerodynamic pressures which stress aeroshell systems to their useful limits. Incorporation of lightweight inflatable decelerator surfaces with increased surface-area footprints provides the opportunity to reduce heat flux and induced temperatures, while increasing the payload mass fraction. Furthermore, inflatable aeroshell decelerators provide the needed deceleration at considerably higher altitudes and Mach numbers when compared with conventional rigid aeroshell entry systems. Inflatable aeroshells also provide for stowage in a compact space, with subsequent deployment of a large-area, lightweight heatshield to survive entry heating. Use of a deployable heatshield decelerator enables an increase in the spacecraft payload mass fraction and may eliminate the need for a spacecraft backshell.

SCOPE in Cataloguing.

ERIC Educational Resources Information Center

Tom, Ellen; Reed, Sue

This report describes the Systematic Computerized Processing in Cataloguing system (SCOPE), an automated system for the catalog department of a university library. The system produces spine labels, pocket labels, book cards for the circulation system, catalog cards including shelf list, main entry, subject and added entry cards, statistics, an…

Port-of-entry Advanced Sorting System (PASS) operational test : final report

DOT National Transportation Integrated Search

1998-12-01

In 1992 the Oregon Department of Transportation undertook an operational test of the Port-of-Entry Advanced Sorting System (PASS), which uses a two-way communication automatic vehicle identification system, integrated with weigh-in-motion, automatic ...

Pathways into prostitution among female jail detainees and their implications for mental health services.

PubMed

McClanahan, S F; McClelland, G M; Abram, K M; Teplin, L A

1999-12-01

To explore the service needs of women in jail, the authors examined three pathways into prostitution: childhood sexual victimization, running away, and drug use. Studies typically have explored only one or two of these pathways, and the relationships among the three points of entry remain unclear. Data on 1,142 female jail detainees were used to examine the effects of childhood sexual victimization, running away, and drug use on entry into prostitution and their differential effects over the life course. Two distinct pathways into prostitution were identified. Running away had a dramatic effect on entry into prostitution in early adolescence, but little effect later in the life course. Childhood sexual victimization, by contrast, nearly doubled the odds of entry into prostitution throughout the lives of women. Although the prevalence of drug use was significantly higher among prostitutes than among nonprostitutes, drug abuse did not explain entry into prostitution. Running away and childhood sexual victimization provide distinct pathways into prostitution. The findings suggest that women wishing to leave prostitution may benefit from different mental health service strategies depending on which pathway to prostitution they experienced.

Remote Monitoring Systems for Chronic Patients on Home Hemodialysis: Field Test of a Copresence-Enhanced Design.

PubMed

Liu, Na; Kim, Jinman; Jung, Younhyun; Arisy, Adani; Nicdao, Mary Ann; Mikaheal, Mary; Baldacchino, Tanya; Khadra, Mohamed; Sud, Kamal

2017-08-29

Patients undertaking long-term and chronic home hemodialysis (HHD) are subject to feelings of isolation and anxiety due to the absence of physical contact with their health care professionals and lack of feedback in regards to their dialysis treatments. Therefore, it is important for these patients to feel the "presence" of the health care professionals remotely while on hemodialysis at home for better compliance with the dialysis regime and to feel connected with health care professionals. This study presents an HHD system design for hemodialysis patients with features to enhance patient's perceived "copresence" with their health care professionals. Various mechanisms to enhance this perception were designed and implemented, including digital logbooks, emotion sharing, and feedback tools. The mechanism in our HHD system aims to address the limitations associated with existing self-monitoring tools for HHD patients. A field trial involving 3 nurses and 74 patients was conducted to test the pilot implementation of the copresence design in our HHD system. Mixed method research was conducted to evaluate the system, including surveys, interviews, and analysis of system data. Patients created 2757 entries of dialysis cases during the period of study. Altogether there were 492 entries submitted with "Very Happy" as the emotional status, 2167 entries with a "Happy" status, 56 entries with a "Neutral" status, 18 entries with an "Unhappy" status, and 24 entries with a "Very unhappy" status. Patients felt assured to share their emotions with health care professionals. Health care professionals were able to prioritize the review of the entries based on the emotional status and also felt assured to see patients' change in mood. There were 989 entries sent with short notes. Entries with negative emotions had a higher percentage of supplementary notes entered compared to the entries with positive and neutral emotions. The qualitative data further showed that the HHD system was able to improve patients' feelings of being connected with their health care professionals and thus enhance their self-care on HHD. The health care professionals felt better assured with patients' status with the use of the system and reported improved productivity and satisfaction with the copresence enhancement mechanism. The survey on the system usability indicated a high level of satisfaction among patients and nurses. The copresence enhancement design complements the conventional use of a digitized HHD logbook and will further benefit the design of future telehealth systems. ©Na Liu, Jinman Kim, Younhyun Jung, Adani Arisy, Mary Ann Nicdao, Mary Mikaheal, Tanya Baldacchino, Mohamed Khadra, Kamal Sud. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 29.08.2017.

Perpetuation of torsade de pointes in heterogeneous hearts: competing foci or re-entry?

PubMed

Vandersickel, Nele; de Boer, Teun P; Vos, Marc A; Panfilov, Alexander V

2016-12-01

The underlying mechanism of torsade de pointes (TdP) remains of debate: perpetuation may be due to (1) focal activity or (2) re-entrant activity. The onset of TdP correlates with action potential heterogeneities in different regions of the heart. We studied the mechanism of perpetuation of TdP in silico using a 2D model of human cardiac tissue and an anatomically accurate model of the ventricles of the human heart. We found that the mechanism of perpetuation TdP depends on the degree of heterogeneity. If the degree of heterogeneity is large, focal activity alone can sustain a TdP, otherwise re-entrant activity emerges. This result can help to understand the relationship between the mechanisms of TdP and tissue properties and may help in developing new drugs against it. Torsade de pointes (TdP) can be the consequence of cardiac remodelling, drug effects or a combination of both. The mechanism underlying TdP is unclear, and may involve triggered focal activity or re-entry. Recent work by our group has indicated that both cases may exist, i.e. TdPs induced in the chronic atrioventricular block (CAVB) dog model may have a focal origin or are due to re-entry. Also it was found that heterogeneities might play an important role. In the current study we have used computational modelling to further investigate the mechanisms involved in TdP initiation and perpetuation, especially in the CAVB dog model, by the addition of heterogeneities with reduced repolarization reserve in comparison with the surrounding tissue. For this, the TNNP computer model was used for computations. We demonstrated in 2D and 3D simulations that ECGs with the typical TdP morphology can be caused by both multiple competing foci and re-entry circuits as a result of introduction of heterogeneities, depending on whether the heterogeneities have a large or a smaller reduced repolarization reserve in comparison with the surrounding tissue. Large heterogeneities can produce ectopic TdP, while smaller heterogeneities will produce re-entry-type TdP. © 2016 The Authors. The Journal of Physiology © 2016 The Physiological Society.

Redox gradients in distribution systems influence water quality, corrosion, and microbial ecology.

PubMed

Masters, Sheldon; Wang, Hong; Pruden, Amy; Edwards, Marc A

2015-01-01

Simulated distribution systems (SDSs) defined the interplay between disinfectant type (free chlorine and chloramines), water age (1-10.2 days), and pipe material (PVC, iron and cement surfaces) on water chemistry, redox zones and infrastructure degradation. Redox gradients developed as a function of water age and pipe material affected the quality of water consumers would receive. Free chlorine was most stable in the presence of PVC while chloramine was most stable in the presence of cement. At a 3.6 day water age the residual in the chlorinated PVC SDS was more than 3.5 times higher than in the chlorinated iron or cement systems. In contrast, the residual in the chloraminated cement SDS was more than 10 times greater than in the chloraminated iron or PVC systems. Near the point of entry to the SDSs where disinfectant residuals were present, free chlorine tended to cause as much as 4 times more iron corrosion when compared to chloramines. Facultative denitrifying bacteria were ubiquitous, and caused complete loss of nitrogen at distal points in systems with iron, and these bacteria co-occurred with very severe pitting attack (1.6-1.9 mm/year) at high water age.

Mars Science Laboratory Entry, Descent and Landing System Development Challenges and Preliminary Flight Performance

NASA Technical Reports Server (NTRS)

Steltzner, Adam D.; San Martin, A. Miguel; Rivellini, Tommaso P.

2013-01-01

The Mars Science Laboratory project recently landed the Curiosity rover on the surface of Mars. With the success of the landing system, the performance envelope of entry, descent, and landing capabilities has been extended over the previous state of the art. This paper will present an overview of the MSL entry, descent, and landing system, a discussion of a subset of its development challenges, and include a discussion of preliminary results of the flight reconstruction effort.

Overview of the MEDLI Project

NASA Technical Reports Server (NTRS)

Gazarik, Michael J.; Hwang, Helen; Little, Alan; Cheatwood, Neil; Wright, Michael; Herath, Jeff

2007-01-01

The Mars Science Laboratory Entry, Descent, and Landing Instrumentation (MEDLI) Project's objectives are to measure aerothermal environments, sub-surface heatshield material response, vehicle orientation, and atmospheric density for the atmospheric entry and descent phases of the Mars Science Laboratory (MSL) entry vehicle. The flight science objectives of MEDLI directly address the largest uncertainties in the ability to design and validate a robust Mars entry system, including aerothermal, aerodynamic and atmosphere models, and thermal protection system (TPS) design. The instrumentation suite will be installed in the heatshield of the MSL entry vehicle. The acquired data will support future Mars entry and aerocapture missions by providing measured atmospheric data to validate Mars atmosphere models and clarify the design margins for future Mars missions. MEDLI thermocouple and recession sensor data will significantly improve the understanding of aeroheating and TPS performance uncertainties for future missions. MEDLI pressure data will permit more accurate trajectory reconstruction, as well as separation of aerodynamic and atmospheric uncertainties in the hypersonic and supersonic regimes. This paper provides an overview of the project including the instrumentation design, system architecture, and expected measurement response.

Overview of the MEDLI Project

NASA Technical Reports Server (NTRS)

Gazarik, Michael J.; Little, Alan; Cheatwood, F. Neil; Wright, Michael J.; Herath, Jeff A.; Martinez, Edward R.; Munk, Michelle; Novak, Frank J.; Wright, Henry S.

2008-01-01

The Mars Science Laboratory Entry, Descent, and Landing Instrumentation (MEDLI) Project s objectives are to measure aerothermal environments, sub-surface heatshield material response, vehicle orientation, and atmospheric density for the atmospheric entry and descent phases of the Mars Science Laboratory (MSL) entry vehicle. The flight science objectives of MEDLI directly address the largest uncertainties in the ability to design and validate a robust Mars entry system, including aerothermal, aerodynamic and atmosphere models, and thermal protection system (TPS) design. The instrumentation suite will be installed in the heatshield of the MSL entry vehicle. The acquired data will support future Mars entry and aerocapture missions by providing measured atmospheric data to validate Mars atmosphere models and clarify the design margins for future Mars missions. MEDLI thermocouple and recession sensor data will significantly improve the understanding of aeroheating and TPS performance uncertainties for future missions. MEDLI pressure data will permit more accurate trajectory reconstruction, as well as separation of aerodynamic and atmospheric uncertainties in the hypersonic and supersonic regimes. This paper provides an overview of the project including the instrumentation design, system architecture, and expected measurement response.

A combination HIV reporter virus system for measuring post-entry event efficiency and viral outcome in primary CD4+ T cell subsets.

PubMed

Tilton, Carisa A; Tabler, Caroline O; Lucera, Mark B; Marek, Samantha L; Haqqani, Aiman A; Tilton, John C

2014-01-01

Fusion between the viral membrane of human immunodeficiency virus (HIV) and the host cell marks the end of the HIV entry process and the beginning of a series of post-entry events including uncoating, reverse transcription, integration, and viral gene expression. The efficiency of post-entry events can be modulated by cellular factors including viral restriction factors and can lead to several distinct outcomes: productive, latent, or abortive infection. Understanding host and viral proteins impacting post-entry event efficiency and viral outcome is critical for strategies to reduce HIV infectivity and to optimize transduction of HIV-based gene therapy vectors. Here, we report a combination reporter virus system measuring both membrane fusion and viral promoter-driven gene expression. This system enables precise determination of unstimulated primary CD4+ T cell subsets targeted by HIV, the efficiency of post-entry viral events, and viral outcome and is compatible with high-throughput screening and cell-sorting methods. Copyright © 2013 Elsevier B.V. All rights reserved.

Aero-thermo-dynamic analysis of a low ballistic coefficient deployable capsule in Earth re-entry

NASA Astrophysics Data System (ADS)

Zuppardi, G.; Savino, R.; Mongelluzzo, G.

2016-10-01

The paper deals with a microsatellite and the related deployable recovery capsule. The aero-brake is folded at launch and deployed in space and is able to perform a de-orbiting controlled re-entry. This kind of capsule, with a flexible, high temperature resistant fabric, thanks to its lightness and modulating capability, can be an alternative to the current ;conventional; recovery capsules. The present authors already analyzed the trajectory and the aerodynamic behavior of low ballistic coefficient capsules during Earth re-entry and Mars entry. In previous studies, aerodynamic longitudinal stability analysis and evaluation of thermal and aerodynamic loads for a possible suborbital re-entry demonstrator were carried out in both continuum and rarefied regimes. The present study is aimed at providing preliminary information about thermal and aerodynamic loads and longitudinal stability for a similar deployable capsule, as well as information about the electronic composition of the plasma sheet and its possible influence on radio communications at the altitudes where GPS black-out could occur. Since the computer tests were carried out at high altitudes, therefore in rarefied flow fields, use of Direct Simulation Monte Carlo codes was mandatory. The computations involved both global aerodynamic quantities (drag and longitudinal moment coefficients) and local aerodynamic quantities (heat flux and pressure distributions along the capsule surface). The results verified that the capsule at high altitude (150 km) is self-stabilizing; it is stable around the nominal attitude or at zero angle of attack and unstable around the reverse attitude or at 180° angle of attack. The analysis also pointed out the presence of extra statically stable equilibrium trim points.

On-Ground Casualty Risk Reduction by Structural Design for Demise

NASA Astrophysics Data System (ADS)

Lemmens, Stijn; Krag, Holger; Funke, Quirin

In recent years, awareness concerning the risk posed by un-controlled re-entering spacecraft on ground has increased. Some re-entry events such as ESA's GOCE in 2013 and NASA's UARS appeared prominent in international media. Space agencies and nations, in cooperation within the Inter-Agency Space Debris Coordination Committee (IADC), have established a requirements to limited the on-ground risk for future missions. To meet the requirements, the amount of debris falling back on Earth has to be limited in number, mass and size. Design for demise (D4D) refers to all measures taken in the design of a space object to increase the potential for demise of the object and its components during re-entry. SCARAB (Spacecraft Atmospheric Re-entry and Break-Up) is ESA's high-fidelity tool which analyses the thermal and structural effects of atmospheric re-entry on spacecraft in a finite-element approach. For this study, a model of a representative satellite is developed in Scarab to serve as test-bed for D4D analysis on a structural level. The model is used as starting point for different D4D approaches based on increasing the exposure of the satellite components to the aero-thermal environment, as a way to speed up the demise. Statistical bootstrapping is applied to the resulting on-ground fragment lists in order to compare the different re-entry scenarios and to determine the uncertainties of the results. Moreover, the bootstrap results can be used to analyse the casualty risk estimator from a theoretical point of view. The risk reductions for the analysed D4D techniques are presented w.r.t. the reference scenario for the modelled representative satellite.

The Influence of China's Entry into the WTO on Its Education System

ERIC Educational Resources Information Center

Ding, Xiaohao; Yue, Changjun; Sun, Yuze

2009-01-01

The entry of China in the World Trade Organization (WTO) in 2001 holds a number of promises for educational services. The purpose of this article is to explore both the direct and the indirect influence of China's entry into WTO on its education system. The direct influence mainly refers to the increase in the demand for education overseas and in…

Flutter Analysis of the Shuttle Tile Overlay Repair Concept

NASA Technical Reports Server (NTRS)

Bey, Kim S.; Scott, Robert C.; Bartels, Robert E.; Waters, William A.; Chen, Roger

2007-01-01

The Space Shuttle tile overlay repair concept, developed at the NASA Johnson Space Center, is designed for on-orbit installation over an area of damaged tile to permit safe re-entry. The thin flexible plate is placed over the damaged area and secured to tile at discreet points around its perimeter. A series of flutter analyses were performed to determine if the onset of flutter met the required safety margins. Normal vibration modes of the panel, obtained from a simplified structural analysis of the installed concept, were combined with a series of aerodynamic analyses of increasing levels of fidelity in terms of modeling the flow physics to determine the onset of flutter. Results from these analyses indicate that it is unlikely that the overlay installed at body point 1800 will flutter during re-entry.

31 CFR 315.3 - Converting definitive savings bonds to book-entry bonds in New Treasury Direct.

Code of Federal Regulations, 2011 CFR

2011-07-01

... book-entry bonds in New Treasury Direct. 315.3 Section 315.3 Money and Finance: Treasury Regulations.... SAVINGS NOTES General Information § 315.3 Converting definitive savings bonds to book-entry bonds in New... book-entry bonds through New Treasury Direct, an online system for holding Treasury securities. The Web...

31 CFR 315.3 - Converting definitive savings bonds to book-entry bonds in New Treasury Direct.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to book-entry bonds in New Treasury Direct. 315.3 Section 315.3 Money and Finance: Treasury.... SAVINGS NOTES General Information § 315.3 Converting definitive savings bonds to book-entry bonds in New... book-entry bonds through New Treasury Direct, an online system for holding Treasury securities. The Web...

Entry Vehicle Control System Design for the Mars Smart Lander

NASA Technical Reports Server (NTRS)

Calhoun, Philip C.; Queen, Eric M.

2002-01-01

The NASA Langley Research Center, in cooperation with the Jet Propulsion Laboratory, participated in a preliminary design study of the Entry, Descent and Landing phase for the Mars Smart Lander Project. This concept utilizes advances in Guidance, Navigation and Control technology to significantly reduce uncertainty in the vehicle landed location on the Mars surface. A candidate entry vehicle controller based on the Reaction Control System controller for the Apollo Lunar Excursion Module digital autopilot is proposed for use in the entry vehicle attitude control. A slight modification to the phase plane controller is used to reduce jet-firing chattering while maintaining good control response for the Martian entry probe application. The controller performance is demonstrated in a six-degree-of-freedom simulation with representative aerodynamics.

Investigating an Evolutionarily Conserved Role for the Tousled-like Kinase in Genome Stability and as a Novel Target for the Treatment of Ovarian Cancer

DTIC Science & Technology

2013-10-01

Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the...cleavage plane during cytokinesis (15). The anteroposterior (AP) axis of the one- cell embryo is determined at fertilization by the sperm entry point, which...demarcates the posterior pole of the embryo (16). Upon sperm entry, the anteriorly-localized maternal nucleus undergoes two meiotic divisions to

Proposed Toxic and Hypoxic Impairment of a Brainstem Locus in Autism

PubMed Central

McGinnis, Woody R.; Audhya, Tapan; Edelson, Stephen M.

2013-01-01

Electrophysiological findings implicate site-specific impairment of the nucleus tractus solitarius (NTS) in autism. This invites hypothetical consideration of a large role for this small brainstem structure as the basis for seemingly disjointed behavioral and somatic features of autism. The NTS is the brain’s point of entry for visceral afference, its relay for vagal reflexes, and its integration center for autonomic control of circulatory, immunological, gastrointestinal, and laryngeal function. The NTS facilitates normal cerebrovascular perfusion, and is the seminal point for an ascending noradrenergic system that modulates many complex behaviors. Microvascular configuration predisposes the NTS to focal hypoxia. A subregion—the “pNTS”—permits exposure to all blood-borne neurotoxins, including those that do not readily transit the blood-brain barrier. Impairment of acetylcholinesterase (mercury and cadmium cations, nitrates/nitrites, organophosphates, monosodium glutamate), competition for hemoglobin (carbon monoxide, nitrates/nitrites), and higher blood viscosity (net systemic oxidative stress) are suggested to potentiate microcirculatory insufficiency of the NTS, and thus autism. PMID:24336025

Programs To Optimize Spacecraft And Aircraft Trajectories

NASA Technical Reports Server (NTRS)

Brauer, G. L.; Petersen, F. M.; Cornick, D.E.; Stevenson, R.; Olson, D. W.

1994-01-01

POST/6D POST is set of two computer programs providing ability to target and optimize trajectories of powered or unpowered spacecraft or aircraft operating at or near rotating planet. POST treats point-mass, three-degree-of-freedom case. 6D POST treats more-general rigid-body, six-degree-of-freedom (with point masses) case. Used to solve variety of performance, guidance, and flight-control problems for atmospheric and orbital vehicles. Applications include computation of performance or capability of vehicle in ascent, or orbit, and during entry into atmosphere, simulation and analysis of guidance and flight-control systems, dispersion-type analyses and analyses of loads, general-purpose six-degree-of-freedom simulation of controlled and uncontrolled vehicles, and validation of performance in six degrees of freedom. Written in FORTRAN 77 and C language. Two machine versions available: one for SUN-series computers running SunOS(TM) (LAR-14871) and one for Silicon Graphics IRIS computers running IRIX(TM) operating system (LAR-14869).

Representation of viruses in the remediated PDB archive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawson, Catherine L., E-mail: cathy.lawson@rutgers.edu; Dutta, Shuchismita; Westbrook, John D.

2008-08-01

A new data model for PDB entries of viruses and other biological assemblies with regular noncrystallographic symmetry is described. A new scheme has been devised to represent viruses and other biological assemblies with regular noncrystallographic symmetry in the Protein Data Bank (PDB). The scheme describes existing and anticipated PDB entries of this type using generalized descriptions of deposited and experimental coordinate frames, symmetry and frame transformations. A simplified notation has been adopted to express the symmetry generation of assemblies from deposited coordinates and matrix operations describing the required point, helical or crystallographic symmetry. Complete correct information for building full assemblies,more » subassemblies and crystal asymmetric units of all virus entries is now available in the remediated PDB archive.« less

An understanding of human dynamics in urban subway traffic from the Maximum Entropy Principle

NASA Astrophysics Data System (ADS)

Yong, Nuo; Ni, Shunjiang; Shen, Shifei; Ji, Xuewei

2016-08-01

We studied the distribution of entry time interval in Beijing subway traffic by analyzing the smart card transaction data, and then deduced the probability distribution function of entry time interval based on the Maximum Entropy Principle. Both theoretical derivation and data statistics indicated that the entry time interval obeys power-law distribution with an exponential cutoff. In addition, we pointed out the constraint conditions for the distribution form and discussed how the constraints affect the distribution function. It is speculated that for bursts and heavy tails in human dynamics, when the fitted power exponent is less than 1.0, it cannot be a pure power-law distribution, but with an exponential cutoff, which may be ignored in the previous studies.

Supporting Patient Care in the Emergency Department with a Computerized Whiteboard System

PubMed Central

Aronsky, Dominik; Jones, Ian; Lanaghan, Kevin; Slovis, Corey M.

2008-01-01

Efficient information management and communication within the emergency department (ED) is essential to providing timely and high-quality patient care. The ED whiteboard (census board) usually serves as an ED’s central access point for operational and patient-related information. This article describes the design, functionality, and experiences with a computerized ED whiteboard, which has the ability to display relevant operational and patient-related information in real time. Embedded functionality, additional whiteboard views, and the integration with ED and institutional information system components, such as the computerized patient record or the provider order entry system, provide rapid access to more detailed information. As an information center, the computerized whiteboard supports our ED environment not only for providing patient care, but also for operational, educational, and research activities. PMID:18096913

Use of Chemical Pesticides in Ethiopia: A Cross-Sectional Comparative Study on Knowledge, Attitude and Practice of Farmers and Farm Workers in Three Farming Systems.

PubMed

Negatu, Beyene; Kromhout, Hans; Mekonnen, Yalemtshay; Vermeulen, Roel

2016-06-01

Chemical pesticides, regardless of their inherent hazard, are used intensively in the fast changing agricultural sector of Ethiopia. We conducted a cross-sectional pesticide Knowledge, Attitude and Practice (KAP) survey among 601 farmers and farm workers (applicators and re-entry workers) in three farming systems [large-scale closed greenhouses (LSGH), large-scale open farms (LSOF), and small-scale irrigated farms (SSIF)]. Main observations were that 85% of workers did not attain any pesticide-related training, 81% were not aware of modern alternatives for chemical pesticides, 10% used a full set of personal protective equipment, and 62% did not usually bath or shower after work. Among applicators pesticide training attendance was highest in LSGH (35%) and was lowest in SSIF (4%). None of the female re-entry farm workers had received pesticide-related training. Personal protective equipment use was twice as high among pesticide applicators as among re-entry workers (13 versus 7%), while none of the small-scale farm workers used personal protection equipment. Stockpiling and burial of empty pesticide containers and discarding empty pesticide containers in farming fields were reported in both LSOF and by 75% of the farm workers in SSIF. Considerable increment in chemical pesticide usage intensity, illegitimate usages of DDT and Endosulfan on food crops and direct import of pesticides without the formal Ethiopian registration process were also indicated. These results point out a general lack of training and knowledge regarding the safe use of pesticides in all farming systems but especially among small-scale farmers. This in combination with the increase in chemical pesticide usage in the past decade likely results in occupational and environmental health risks. Improved KAP that account for institutional difference among various farming systems and enforcement of regulatory measures including the available occupational and environmental proclamations in Ethiopia are urgently needed. © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

TESTING & EVALUATION OF POINT-OF-USE (POU) AND POINT-OF-ENTRY (POE) TECHNOLOGIES FOR DRINKING WATER TREATMENT

EPA Science Inventory

Centralized water treatment and distribution are still the recommended methods for producing safe drinking water. But in reality this approach cannot and will not meet the needs of millions of homes in both the U.S. and around the world, which do not have the option of connectin...

Updated tops file for Cretaceous and lower Tertiary units, Piceance Basin, northwest Colorado

USGS Publications Warehouse

Johnson, Ronald C.; Dietrich, John D.; Mercier, Tracey J.

2015-08-04

Each entry for the base of the Long Point Bed was obtained at a location where the mapped Long Point Bed intersects a contour line on the published maps. Precision of each elevation is therefore dependent on the precision of the maps and the placement of the mapped contact by the authors.

19 CFR 10.17 - Valuation of exempted components.

Code of Federal Regulations, 2010 CFR

2010-04-01

... components when last purchased, f.o.b. United States port of exportation or point of border crossing as set out in the invoice and entry papers, or, if no purchase was made, the value of the components at the time of their shipment for exportation, f.o.b. United States port of exportation or point of border...

7 CFR 51.628 - Tolerances.

Code of Federal Regulations, 2011 CFR

2011-01-01

...—Shipping Point 1 (A) For 1 through 20 Samples Factor Grades AL 2 Number of 33-count samples 3 1 2 3 4 5 6 7.... 2 Russet. Table I—Shipping Point 1 (Continued) (B) For 21 through 40 Samples Factor Grades AL 2... outside the continental United States, the port of entry into the United States. 2 AL—Absolute limit...

7 CFR 51.628 - Tolerances.

Code of Federal Regulations, 2012 CFR

2012-01-01

...—Shipping Point 1 (A) For 1 through 20 Samples Factor Grades AL 2 Number of 33-count samples 3 1 2 3 4 5 6 7.... 2 Russet. Table I—Shipping Point 1 (Continued) (B) For 21 through 40 Samples Factor Grades AL 2... outside the continental United States, the port of entry into the United States. 2 AL—Absolute limit...

7 CFR 51.628 - Tolerances.

Code of Federal Regulations, 2010 CFR

2010-01-01

...—Shipping Point 1 (A) For 1 through 20 Samples Factor Grades AL 2 Number of 33-count samples 3 1 2 3 4 5 6 7.... 2 Russet. Table I—Shipping Point 1 (Continued) (B) For 21 through 40 Samples Factor Grades AL 2... outside the continental United States, the port of entry into the United States. 2 AL—Absolute limit...

Computer retrieval of bibliographies using an editing program

USGS Publications Warehouse

Brethauer, G.E.; Brokaw, V.L.

1979-01-01

A simple program permits use of the text .editor 'qedx,' part of many computer systems, to input bibliographic entries and to retrieve specific entries which contain keywords of interest. Multiple keywords may be used sequentially to find specific entries.

SAKURA-viewer: intelligent order history viewer based on two-viewpoint architecture.

PubMed

Toyoda, Shuichi; Niki, Noboru; Nishitani, Hiromu

2007-03-01

We propose a new intelligent order history viewer applied to consolidating and visualizing data. SAKURA-viewer is a highly effective tool, as: 1) it visualizes both the semantic viewpoint and the temporal viewpoint of patient records simultaneously; 2) it promotes awareness of contextual information among the daily data; and 3) it implements patient-centric data entry methods. This viewer contributes to decrease the user's workload in an order entry system. This viewer is now incorporated into an order entry system being run on an experimental basis. We describe the evaluation of this system using results of a user satisfaction survey, analysis of information consolidation within the database, and analysis of the frequency of use of data entry methods.

INVESTIGATION OF DRY-WEATHER POLLUTANT ENTRIES INTO STORM-DRAINAGE SYSTEMS

EPA Science Inventory

This article describes the results of a series of research tasks to develop a procedure to investigate non-stormwater (dry-weather) entries into storm drainage systems. Dry-weather flows discharging from storm drainage systems can contribute significant pollutant loadings to rece...

Research and development for Onboard Navigation (ONAV) ground based expert/trainer system: ONAV entry knowledge requirements specification update

NASA Technical Reports Server (NTRS)

Bochsler, Daniel C.

1988-01-01

A revised version of expert knowledge for the onboard navigation (ONAV) entry system is given. Included is some brief background information together with information describing the knowledge that the system does contain.

77 FR 67062 - Fee Schedule for the Transfer of U.S. Treasury Book-Entry Securities Held on the National Book...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-08

... DEPARTMENT OF THE TREASURY Fiscal Service Fee Schedule for the Transfer of U.S. Treasury Book-Entry Securities Held on the National Book-Entry System AGENCY: Bureau of the Public Debt, Fiscal... fee schedule applicable to transfers of U.S. Treasury book-entry securities maintained on the National...

75 FR 67807 - Fee Schedule for the Transfer of U.S. Treasury Book-Entry Securities Held on the National Book...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-03

... DEPARTMENT OF THE TREASURY Fiscal Service Fee Schedule for the Transfer of U.S. Treasury Book-Entry Securities Held on the National Book-Entry System Authority: 31 CFR 357.45. AGENCY: Bureau of the...) is announcing a new fee schedule applicable to transfers of U.S. Treasury book-entry securities...

76 FR 68523 - Fee Schedule for the Transfer of U.S. Treasury Book-Entry Securities Held on the National Book...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... DEPARTMENT OF THE TREASURY Fiscal Service Fee Schedule for the Transfer of U.S. Treasury Book-Entry Securities Held on the National Book-Entry System AGENCY: Bureau of the Public Debt, Fiscal... fee schedule applicable to transfers of U.S. Treasury book-entry securities maintained on the National...

Designing Computerized Provider Order Entry Software in Iran: The Nurses' and Physicians' Viewpoints.

PubMed

Khammarnia, Mohammad; Sharifian, Roxana; Zand, Farid; Keshtkaran, Ali; Barati, Omid

2016-09-01

This study aimed to identify the functional requirements of computerized provider order entry software and design this software in Iran. This study was conducted using review documentation, interview, and focus group discussions in Shiraz University of Medical Sciences, as the medical pole in Iran, in 2013-2015. The study sample consisted of physicians (n = 12) and nurses (n = 2) in the largest hospital in the southern part of Iran and information technology experts (n = 5) in Shiraz University of Medical Sciences. Functional requirements of the computerized provider order entry system were examined in three phases. Finally, the functional requirements were distributed in four levels, and accordingly, the computerized provider order entry software was designed. The software had seven main dimensions: (1) data entry, (2) drug interaction management system, (3) warning system, (4) treatment services, (5) ability to write in software, (6) reporting from all sections of the software, and (7) technical capabilities of the software. The nurses and physicians emphasized quick access to the computerized provider order entry software, order prescription section, and applicability of the software. The software had some items that had not been mentioned in other studies. Ultimately, the software was designed by a company specializing in hospital information systems in Iran. This study was the first specific investigation of computerized provider order entry software design in Iran. Based on the results, it is suggested that this software be implemented in hospitals.

Comprehensive analysis of a Radiology Operations Management computer system.

PubMed

Arenson, R L; London, J W

1979-11-01

The Radiology Operations Management computer system at the Hospital of the University of Pennsylvania is discussed. The scheduling and file room modules are based on the system at Massachusetts General Hospital. Patient delays are indicated by the patient tracking module. A reporting module allows CRT/keyboard entry by transcriptionists, entry of standard reports by radiologists using bar code labels, and entry by radiologists using a specialty designed diagnostic reporting terminal. Time-flow analyses demonstrate a significant improvement in scheduling, patient waiting, retrieval of radiographs, and report delivery. Recovery of previously lost billing contributes to the proved cost effectiveness of this system.

Lifespan Extension in a Semelparous Chordate Occurs via Developmental Growth Arrest Just Prior to Meiotic Entry

PubMed Central

Subramaniam, Gunasekaran; Campsteijn, Coen; Thompson, Eric M.

2014-01-01

It is proposed that the ageing process is linked to signaling from the germline such that the rate of ageing can be adjusted to the state of the reproductive system, allowing these two processes to co-evolve. Mechanistic insight into this link has been primarily derived from iteroparous reproductive models, the nematode C. elegans, and the arthropod Drosophila. Here, we examined to what extent these mechanisms are evolutionarily conserved in a semelparous chordate, Oikopleura dioica, where we identify a developmental growth arrest (GA) in response to crowded, diet-restricted conditions, which can extend its lifespan at least three-fold. Under nutritional stress, the iteroparative models sacrifice germ cells that have entered meiosis, while maintaining a reduced pool of active germline stem cells (GSCs). In contrast, O. dioica only entered GA prior to meiotic entry. Stress conditions encountered after this point led to maturation in a normal time frame but with reduced reproductive output. During GA, TOR signaling was inhibited, whereas MAPK, ERK1/2 and p38 pathways were activated, and under such conditions, activation of these pathways was shown to be critical for survival. Direct inhibition of TOR signaling alone was sufficient to prevent meiotic entry and germline differentiation. This inhibition activated the p38 pathway, but did not activate the ERK1/2 pathway. Thus, the link between reproductive status and lifespan extension in response to nutrient-limited conditions is interpreted in a significantly different manner in these iteroparative versus semelparous models. In the latter case, meiotic entry is a definitive signal that lifespan extension can no longer occur, whereas in the former, meiotic entry is not a unique chronological event, and can be largely erased during lifespan extension in response to nutrient stress, and reactivated from a pool of maintained GSCs when conditions improve. PMID:24695788

Planetary/DOD entry technology flight experiments. Volume 2: Planetary entry flight experiments

NASA Technical Reports Server (NTRS)

Christensen, H. E.; Krieger, R. J.; Mcneilly, W. R.; Vetter, H. C.

1976-01-01

The technical feasibility of launching a high speed, earth entry vehicle from the space shuttle to advance technology for the exploration of the outer planets' atmospheres was established. Disciplines of thermodynamics, orbital mechanics, aerodynamics propulsion, structures, design, electronics and system integration focused on the goal of producing outer planet environments on a probe shaped vehicle during an earth entry. Major aspects of analysis and vehicle design studied include: planetary environments, earth entry environment capability, mission maneuvers, capabilities of shuttle upper stages, a comparison of earth entry planetary environments, experiment design and vehicle design.

48 CFR 552.270-9 - Inspection-Right of Entry.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for asbestos fibers; (2) Inspecting the heating, ventilation and air conditioning system, maintenance... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Inspection-Right of Entry. 552.270-9 Section 552.270-9 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION...

Progress of Aircraft System Noise Assessment with Uncertainty Quantification for the Environmentally Responsible Aviation Project

NASA Technical Reports Server (NTRS)

Thomas, Russell H.; Burley, Casey L.; Guo, Yueping

2016-01-01

Aircraft system noise predictions have been performed for NASA modeled hybrid wing body aircraft advanced concepts with 2025 entry-into-service technology assumptions. The system noise predictions developed over a period from 2009 to 2016 as a result of improved modeling of the aircraft concepts, design changes, technology development, flight path modeling, and the use of extensive integrated system level experimental data. In addition, the system noise prediction models and process have been improved in many ways. An additional process is developed here for quantifying the uncertainty with a 95% confidence level. This uncertainty applies only to the aircraft system noise prediction process. For three points in time during this period, the vehicle designs, technologies, and noise prediction process are documented. For each of the three predictions, and with the information available at each of those points in time, the uncertainty is quantified using the direct Monte Carlo method with 10,000 simulations. For the prediction of cumulative noise of an advanced aircraft at the conceptual level of design, the total uncertainty band has been reduced from 12.2 to 9.6 EPNL dB. A value of 3.6 EPNL dB is proposed as the lower limit of uncertainty possible for the cumulative system noise prediction of an advanced aircraft concept.

78 FR 35607 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-13

..., Camp H.M. Smith, HI 96861-4028.'' * * * * * Categories of records in the system: Delete entry and.... Box 64028, Camp H.M. Smith, HI 96861-4028.'' Notification procedure: Delete entry and replace with...

Ischaemic stroke and Clostridium septicum sepsis and meningitis in a patient with occult colon carcinoma - a case report and review of the literature.

PubMed

Macha, Kosmas; Giede-Jeppe, Antje; Lücking, Hannes; Coras, Roland; Huttner, Hagen B; Held, Jürgen

2016-11-24

Clostridium septicum is a rare cause of meningitis and brain abscess in children and adults. Gas production by the pathogen can lead to pneumocephalus and the overall mortality rate of Clostridium septicum CNS infection is as high as 74%. The most common entry site of the pathogen is the gastrointestinal tract. We describe a 74-year-old man who presented with a left-sided cerebral infarction in the middle cerebral artery territory. In addition the patient showed signs of Systemic Inflammatory Response Syndrome and Disseminated Intravascular Coagulation. Examination of blood cultures and cerebrospinal fluid led to the diagnosis of sepsis and meningitis caused by Clostridium septicum. Despite appropriate antibiotic therapy the condition of the patient deteriorated rapidly and he died on day 2 after admission. Autopsy revealed a previously unknown adenocarcinoma of the colon ascendens as entry site of the pathogen. Clostridium septicum should be considered as potential pathogen in patients with sepsis and meningitis. Gram stain morphology in conjunction with severe sepsis can rapidly point into the direction of this pathogen. CNS infections manifest either as meningoencephalitis/cerebritis or as brain abscess. Entry site of the pathogen is almost uniquely the gastrointestinal tract. In adults more than 50% suffer from colorectal carcinoma, therefore survivors of Clostridium septicum infections should be examined for underlying occult colorectal malignancy.

Structures and Mechanisms Design Concepts for Adaptive Deployable Entry Placement Technology

NASA Technical Reports Server (NTRS)

Yount, Bryan C.; Arnold, James O.; Gage, Peter J.; Mockelman, Jeffrey; Venkatapathy, Ethiraj

2012-01-01

System studies have shown that large deployable aerodynamic decelerators such as the Adaptive Deployable Entry and Placement Technology (ADEPT) concept can revolutionize future robotic and human exploration missions involving atmospheric entry, descent and landing by significantly reducing the maximum heating rate, total heat load, and deceleration loads experienced by the spacecraft during entry [1-3]. ADEPT and the Hypersonic Inflatable Aerodynamic Decelerator (HIAD) [4] share the approach of stowing the entry system in the shroud of the launch vehicle and deploying it to a much larger diameter prior to entry. The ADEPT concept provides a low ballistic coefficient for planetary entry by employing an umbrella-like deployable structure consisting of ribs, struts and a fabric cover that form an aerodynamic decelerator capable of undergoing hypersonic flight. The ADEPT "skin" is a 3-D woven carbon cloth that serves as a thermal protection system (TPS) and as a structural surface that transfers aerodynamic forces to the underlying ribs [5]. This paper focuses on design activities associated with integrating ADEPT components (cloth, ribs, struts and mechanisms) into a system that can function across all configurations and environments of a typical mission concept: stowed during launch, in-space deployment, entry, descent, parachute deployment and separation from the landing payload. The baseline structures and mechanisms were selected via trade studies conducted during the summer and fall of 2012. They are now being incorporated into the design of a ground test article (GTA) that will be fabricated in 2013. It will be used to evaluate retention of the stowed configuration in a launch environment, mechanism operation for release, deployment and locking, and static strength of the deployed decelerator. Of particular interest are the carbon cloth interfaces, underlying hot structure, (Advanced Carbon- Carbon ribs) and other structural components (nose cap, struts, and main body) designed to withstand the pressure and extremely high heating experienced during planetary entry.

Curve fits of predicted inviscid stagnation-point radiative heating rates, cooling factors, and shock standoff distances for hyperbolic earth entry

NASA Technical Reports Server (NTRS)

Suttles, J. T.; Sullivan, E. M.; Margolis, S. B.

1974-01-01

Curve-fit formulas are presented for the stagnation-point radiative heating rate, cooling factor, and shock standoff distance for inviscid flow over blunt bodies at conditions corresponding to high-speed earth entry. The data which were curve fitted were calculated by using a technique which utilizes a one-strip integral method and a detailed nongray radiation model to generate a radiatively coupled flow-field solution for air in chemical and local thermodynamic equilibrium. The range of free-stream parameters considered were altitudes from about 55 to 70 km and velocities from about 11 to 16 km.sec. Spherical bodies with nose radii from 30 to 450 cm and elliptical bodies with major-to-minor axis ratios of 2, 4, and 6 were treated. Powerlaw formulas are proposed and a least-squares logarithmic fit is used to evaluate the constants. It is shown that the data can be described in this manner with an average deviation of about 3 percent (or less) and a maximum deviation of about 10 percent (or less). The curve-fit formulas provide an effective and economic means for making preliminary design studies for situations involving high-speed earth entry.

Technology Investments in the NASA Entry Systems Modeling Project

NASA Technical Reports Server (NTRS)

Barnhardt, Michael; Wright, Michael; Hughes, Monica

2017-01-01

The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game Changing Development (GCD) Program, is engaged in maturation of fundamental research developing aerosciences, materials, and integrated systems products for entry, descent, and landing(EDL)technologies [1]. To date, the ESM project has published over 200 papers in these areas, comprising the bulk of NASAs research program for EDL modeling. This presentation will provide an overview of the projects successes and challenges, and an assessment of future investments in EDL modeling and simulation relevant to NASAs mission

Quality improvement and emerging global health priorities

PubMed Central

Mensah Abrampah, Nana; Syed, Shamsuzzoha Babar; Hirschhorn, Lisa R; Nambiar, Bejoy; Iqbal, Usman; Garcia-Elorrio, Ezequiel; Chattu, Vijay Kumar; Devnani, Mahesh; Kelley, Edward

2018-01-01

Abstract Quality improvement approaches can strengthen action on a range of global health priorities. Quality improvement efforts are uniquely placed to reorient care delivery systems towards integrated people-centred health services and strengthen health systems to achieve Universal Health Coverage (UHC). This article makes the case for addressing shortfalls of previous agendas by articulating the critical role of quality improvement in the Sustainable Development Goal era. Quality improvement can stimulate convergence between health security and health systems; address global health security priorities through participatory quality improvement approaches; and improve health outcomes at all levels of the health system. Entry points for action include the linkage with antimicrobial resistance and the contentious issue of the health of migrants. The work required includes focussed attention on the continuum of national quality policy formulation, implementation and learning; alongside strengthening the measurement-improvement linkage. Quality improvement plays a key role in strengthening health systems to achieve UHC. PMID:29873793

75 FR 20850 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-21

... in the efforts to make system changes. Grantees will complete systems web-based data entry on goals... grantee and key staff-partner interview 249 2 1.60 797 guide EBHV grantee systems web-based data entry... prevent child maltreatment. An evaluation study will address four domains: (1) Systems change to develop...

RADON MITIGATION IN SCHOOLS: HVAC SYSTEMS IN SCHOOLS TEND TO HAVE A GREATER IMPACT ON RADON LEVELS THAN HVAC SYSTEMS IN HOMES

EPA Science Inventory

The first part of this two-part paper discusses radon entry into schools, radon mitigation approaches for schools, and school characteristics (e.g., heating, ventilation, and air conditioing -- HVAC-- system design and operationg) that influence radon entry and mitigation system ...

Mars Entry Atmospheric Data System Modelling and Algorithm Development

NASA Technical Reports Server (NTRS)

Karlgaard, Christopher D.; Beck, Roger E.; OKeefe, Stephen A.; Siemers, Paul; White, Brady; Engelund, Walter C.; Munk, Michelle M.

2009-01-01

The Mars Entry Atmospheric Data System (MEADS) is being developed as part of the Mars Science Laboratory (MSL), Entry, Descent, and Landing Instrumentation (MEDLI) project. The MEADS project involves installing an array of seven pressure transducers linked to ports on the MSL forebody to record the surface pressure distribution during atmospheric entry. These measured surface pressures are used to generate estimates of atmospheric quantities based on modeled surface pressure distributions. In particular, the quantities to be estimated from the MEADS pressure measurements include the total pressure, dynamic pressure, Mach number, angle of attack, and angle of sideslip. Secondary objectives are to estimate atmospheric winds by coupling the pressure measurements with the on-board Inertial Measurement Unit (IMU) data. This paper provides details of the algorithm development, MEADS system performance based on calibration, and uncertainty analysis for the aerodynamic and atmospheric quantities of interest. The work presented here is part of the MEDLI performance pre-flight validation and will culminate with processing flight data after Mars entry in 2012.

Preliminary assessment of the Mars Science Laboratory entry, descent, and landing simulation

NASA Astrophysics Data System (ADS)

Way, David W.

On August 5, 2012, the Mars Science Laboratory rover, Curiosity, successfully landed inside Gale Crater. This landing was the seventh successful landing and fourth rover to be delivered to Mars. Weighing nearly one metric ton, Curiosity is the largest and most complex rover ever sent to investigate another planet. Safely landing such a large payload required an innovative Entry, Descent, and Landing system, which included the first guided entry at Mars, the largest supersonic parachute ever flown at Mars, and the novel Sky Crane landing system. A complete, end-to-end, six degree-of-freedom, multi-body computer simulation of the Mars Science Laboratory Entry, Descent, and Landing sequence was developed at the NASA Langley Research Center. In-flight data gathered during the successful landing is compared to pre-flight statistical distributions, predicted by the simulation. These comparisons provide insight into both the accuracy of the simulation and the overall performance of the Entry, Descent, and Landing system.

Woven Thermal Protection System (WTPS) a Novel Approach to Meet NASA's Most Demanding Reentry Missions

NASA Technical Reports Server (NTRS)

Stackpoole, Mairead

2014-01-01

NASA's future robotic missions to Venus and outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of current mid-density ablators (PICA or Avcoat). Therefore mission planners assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic (CP) is a robust Thermal Protection System (TPS) however its high density and thermal conductivity constrain mission planners to steep entries, high heat fluxes, pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose certification challenges in existing ground based test facilities. In 2012 the Game Changing Development Program in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This presentation will summarize maturation of the WTPS project.

8. INTERIOR OF FRONT SCREENEDIN PORCH SHOWING PORCH ENTRY DOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. INTERIOR OF FRONT SCREENED-IN PORCH SHOWING PORCH ENTRY DOOR AT PHOTO CENTER AND FRONT ENTRY DOOR TO LIVING ROOM AT PHOTO LEFT. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA

Natural Immunity to HIV: a delicate balance between strength and control.

PubMed

Poudrier, Johanne; Thibodeau, Valérie; Roger, Michel

2012-01-01

Understanding how the mucosal immune system in the human female reproductive tract might prevent or facilitate HIV infection has important implications for the design of effective interventions. We and others have established cohorts of highly-exposed, HIV-seronegative individuals, such as HIV-uninfected commercial sex workers, who have remained HIV-negative after more than 5 years of active prostitution. Observations obtained in studies of such individuals, who represent a model of natural immunity to HIV, indicate that HIV resistance may be associated with the host's capacity to preserve systemic integrity by constraining immune activity and controlling inflammatory conditions at the mucosal point of entry. This likely necessitates the orchestration of balanced, first-line and adaptive immune responses.

Apollo experience report: Guidance and control systems: Command and service module entry monitor subsystem

NASA Technical Reports Server (NTRS)

Reina, B., Jr.; Patterson, H. G.

1975-01-01

The conceptual aspects of the command and service module entry monitor subsystem, together with an interpretation of the displays and their associated relationship to entry trajectory control, are presented. The entry monitor subsystem is described, and the problems encountered during the developmental phase and the first five manned Apollo flights are discussed in conjunction with the design improvements implemented.

Inhibitors of SARS-CoV Entry - Identification using an Internally-Controlled Dual Envelope Pseudovirion Assay

PubMed Central

Zhou, Yanchen; Agudelo, Juliet; Lu, Kai; Goetz, David H.; Hansell, Elizabeth; Chen, Yen Ting; Roush, William R.; McKerrow, James; Craik, Charles S.; Amberg, Sean M.; Simmons, Graham

2011-01-01

Severe acute respiratory syndrome-associated coronavirus (SARS-CoV) emerged as the causal agent of an endemic atypical pneumonia, infecting thousands of people worldwide. Although a number of promising potential vaccines and therapeutic agents for SARS-CoV have been described, no effective antiviral drug against SARS-CoV is currently available. The intricate, sequential nature of the viral entry process provides multiple valid targets for drug development. Here, we describe a rapid and safe cell-based high-throughput screening system, Dual Envelope Pseudovirion (DEP) Assay, for specifically screening inhibitors of viral entry. The assay system employs a novel dual envelope strategy, using lentiviral pseudovirions as targets whose entry is driven by the SARS-CoV Spike glycoprotein. A second, unrelated viral envelope is used as an internal control to reduce the number of false positives. As an example of the power of this assay a class of inhibitors is reported with the potential to inhibit SARS-CoV at two steps of the replication cycle, viral entry and particle assembly. This assay system can be easily adapted to screen entry inhibitors against other viruses with the careful selection of matching partner virus envelopes. PMID:21820471

Using Tensor Completion Method to Achieving Better Coverage of Traffic State Estimation from Sparse Floating Car Data

PubMed Central

Ran, Bin; Song, Li; Cheng, Yang; Tan, Huachun

2016-01-01

Traffic state estimation from the floating car system is a challenging problem. The low penetration rate and random distribution make available floating car samples usually cover part space and time points of the road networks. To obtain a wide range of traffic state from the floating car system, many methods have been proposed to estimate the traffic state for the uncovered links. However, these methods cannot provide traffic state of the entire road networks. In this paper, the traffic state estimation is transformed to solve a missing data imputation problem, and the tensor completion framework is proposed to estimate missing traffic state. A tensor is constructed to model traffic state in which observed entries are directly derived from floating car system and unobserved traffic states are modeled as missing entries of constructed tensor. The constructed traffic state tensor can represent spatial and temporal correlations of traffic data and encode the multi-way properties of traffic state. The advantage of the proposed approach is that it can fully mine and utilize the multi-dimensional inherent correlations of traffic state. We tested the proposed approach on a well calibrated simulation network. Experimental results demonstrated that the proposed approach yield reliable traffic state estimation from very sparse floating car data, particularly when dealing with the floating car penetration rate is below 1%. PMID:27448326

Using Tensor Completion Method to Achieving Better Coverage of Traffic State Estimation from Sparse Floating Car Data.

PubMed

Ran, Bin; Song, Li; Zhang, Jian; Cheng, Yang; Tan, Huachun

2016-01-01

Traffic state estimation from the floating car system is a challenging problem. The low penetration rate and random distribution make available floating car samples usually cover part space and time points of the road networks. To obtain a wide range of traffic state from the floating car system, many methods have been proposed to estimate the traffic state for the uncovered links. However, these methods cannot provide traffic state of the entire road networks. In this paper, the traffic state estimation is transformed to solve a missing data imputation problem, and the tensor completion framework is proposed to estimate missing traffic state. A tensor is constructed to model traffic state in which observed entries are directly derived from floating car system and unobserved traffic states are modeled as missing entries of constructed tensor. The constructed traffic state tensor can represent spatial and temporal correlations of traffic data and encode the multi-way properties of traffic state. The advantage of the proposed approach is that it can fully mine and utilize the multi-dimensional inherent correlations of traffic state. We tested the proposed approach on a well calibrated simulation network. Experimental results demonstrated that the proposed approach yield reliable traffic state estimation from very sparse floating car data, particularly when dealing with the floating car penetration rate is below 1%.

Spacecraft Re-Entry Impact Point Targeting Using Aerodynamic Drag

NASA Technical Reports Server (NTRS)

Omar, Sanny R.; Bevilacqua, Riccardo

2017-01-01

The ability to re-enter the atmosphere at a desired location is important for spacecraft containing components that may survive re-entry. While impact point targeting has traditionally been initiated through impulsive burns with chemical thrusters on large vehicles such as the Space Shuttle, and the Soyuz and Apollo capsules, many small spacecraft do not host thrusters and require an alternative means of impact point targeting to ensure that falling debris do not cause harm to persons or property. This paper discusses the use of solely aerodynamic drag force to perform this targeting. It is shown that by deploying and retracting a drag device to vary the ballistic coefficient of the spacecraft, any desired longitude and latitude on the ground can be targeted provided that the maneuvering begins early enough and the latitude is less than the inclination of the orbit. An analytical solution based on perturbations from a numerically propagated trajectory is developed to map the initial state and ballistic coefficient profile of a spacecraft to its impact point. This allows the ballistic coefficient profile necessary to reach a given target point to be rapidly calculated, making it feasible to generate the guidance for the decay trajectory onboard the spacecraft. The ability to target an impact point using aerodynamic drag will enhance the capabilities of small spacecraft and will enable larger space vehicles containing thrusters to save fuel by more effectively leveraging the available aerodynamic drag.

Coherence and decoherence in the brain

NASA Astrophysics Data System (ADS)

Hepp, K.

2012-09-01

This review provides many entry points to controversies in neuroscience, where input from mathematical physics could be fruitful, especially about coherence and decoherence in the brain, both on the level of classical and quantum mechanics.

7 CFR 319.37-14 - Ports of entry.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... La Cienega Blvd., Hawthorne, CA 90250. San Diego, San Ysidro Plant Inspection Station, 9777 Via de la Amistad, Room 140, San Diego, CA 92154. Oakland, San Francisco Plant Inspection Station, 389 Oyster Point...

Ultrasound beam transmission using a discretely orthogonal Gaussian aperture basis

NASA Astrophysics Data System (ADS)

Roberts, R. A.

2018-04-01

Work is reported on development of a computational model for ultrasound beam transmission at an arbitrary geometry transmission interface for generally anisotropic materials. The work addresses problems encountered when the fundamental assumptions of ray theory do not hold, thereby introducing errors into ray-theory-based transmission models. Specifically, problems occur when the asymptotic integral analysis underlying ray theory encounters multiple stationary phase points in close proximity, due to focusing caused by concavity on either the entry surface or a material slowness surface. The approach presented here projects integrands over both the transducer aperture and the entry surface beam footprint onto a Gaussian-derived basis set, thereby distributing the integral over a summation of second-order phase integrals which are amenable to single stationary phase point analysis. Significantly, convergence is assured provided a sufficiently fine distribution of basis functions is used.

Guidance control of small UAV with energy and maneuverability limitations for a search and coverage mission

NASA Astrophysics Data System (ADS)

Gramajo, German G.

This thesis presents an algorithm for a search and coverage mission that has increased autonomy in generating an ideal trajectory while explicitly considering the available energy in the optimization. Further, current algorithms used to generate trajectories depend on the operator providing a discrete set of turning rate requirements to obtain an optimal solution. This work proposes an additional modification to the algorithm so that it optimizes the trajectory for a range of turning rates instead of a discrete set of turning rates. This thesis conducts an evaluation of the algorithm with variation in turn duration, entry-heading angle, and entry point. Comparative studies of the algorithm with existing method indicates improved autonomy in choosing the optimization parameters while producing trajectories with better coverage area and closer final distance to the desired terminal point.

Heat exchange assembly

DOEpatents

Lowenstein, Andrew; Sibilia, Marc; Miller, Jeffrey; Tonon, Thomas S.

2004-06-08

A heat exchange assembly comprises a plurality of plates disposed in a spaced-apart arrangement, each of the plurality of plates includes a plurality of passages extending internally from a first end to a second end for directing flow of a heat transfer fluid in a first plane, a plurality of first end-piece members equaling the number of plates and a plurality of second end-piece members also equaling the number of plates, each of the first and second end-piece members including a recessed region adapted to fluidly connect and couple with the first and second ends of the plate, respectively, and further adapted to be affixed to respective adjacent first and second end-piece members in a stacked formation, and each of the first and second end-piece members further including at least one cavity for enabling entry of the heat transfer fluid into the plate, exit of the heat transfer fluid from the plate, or 180.degree. turning of the fluid within the plate to create a serpentine-like fluid flow path between points of entry and exit of the fluid, and at least two fluid conduits extending through the stacked plurality of first and second end-piece members for providing first fluid connections between the parallel fluid entry points of adjacent plates and a fluid supply inlet, and second fluid connections between the parallel fluid exit points of adjacent plates and a fluid discharge outlet so that the heat transfer fluid travels in parallel paths through each respective plate.

Hear Exchange Assembly

DOEpatents

Lowenstein, Andrew; Sibilia, Marc; Miller, Jeffrey; Tonon, Thomas S.

2003-05-27

A heat exchange assembly comprises a plurality of plates disposed in a spaced-apart arrangement, each of the plurality of plates includes a plurality of passages extending internally from a first end to a second end for directing flow of a heat transfer fluid in a first plane, a plurality of first end-piece members equaling the number of plates and a plurality of second end-piece members also equaling the number of plates, each of the first and second end-piece members including a recessed region adapted to fluidly connect and couple with the first and second ends of the plate, respectively, and further adapted to be affixed to respective adjacent first and second end-piece members in a stacked formation, and each of the first and second end-piece members further including at least one cavity for enabling entry of the heat transfer fluid into the plate, exit of the heat transfer fluid from the plate, or 180.degree. turning of the fluid within the plate to create a serpentine-like fluid flow path between points of entry and exit of the fluid, and at least two fluid conduits extending through the stacked plurality of first and second end-piece members for providing first fluid connections between the parallel fluid entry points of adjacent plates and a fluid supply inlet, and second fluid connections between the parallel fluid exit points of adjacent plates and a fluid discharge outlet so that the heat transfer fluid travels in parallel paths through each respective plate.

Effective Partnering of State Agencies to Achieve Early Hearing Detection and Intervention Benchmarks

ERIC Educational Resources Information Center

Corwin, Joanne

2011-01-01

Relative to Early Hearing Detection and Intervention (EHDI), New Mexico struggles with multiple points of referral into early intervention in the same way most states do. Referrals are not systematized through a single point of entry. The Step*Hi (statewide Parent-Infant) Program of the New Mexico School for the Deaf (NMSD) receives referrals from…