Comprehension and retrieval of failure cases in airborne observatories
NASA Technical Reports Server (NTRS)
Alvarado, Sergio J.; Mock, Kenrick J.
1995-01-01
This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.
Comprehension and retrieval of failure cases in airborne observatories
NASA Astrophysics Data System (ADS)
Alvarado, Sergio J.; Mock, Kenrick J.
1995-05-01
This paper describes research dealing with the computational problem of analyzing and repairing failures of electronic and mechanical systems of telescopes in NASA's airborne observatories, such as KAO (Kuiper Airborne Observatory) and SOFIA (Stratospheric Observatory for Infrared Astronomy). The research has resulted in the development of an experimental system that acquires knowledge of failure analysis from input text, and answers questions regarding failure detection and correction. The system's design builds upon previous work on text comprehension and question answering, including: knowledge representation for conceptual analysis of failure descriptions, strategies for mapping natural language into conceptual representations, case-based reasoning strategies for memory organization and indexing, and strategies for memory search and retrieval. These techniques have been combined into a model that accounts for: (a) how to build a knowledge base of system failures and repair procedures from descriptions that appear in telescope-operators' logbooks and FMEA (failure modes and effects analysis) manuals; and (b) how to use that knowledge base to search and retrieve answers to questions about causes and effects of failures, as well as diagnosis and repair procedures. This model has been implemented in FANSYS (Failure ANalysis SYStem), a prototype text comprehension and question answering program for failure analysis.
Full Envelope Reconfigurable Control Design for the X-33 Vehicle
NASA Technical Reports Server (NTRS)
Cotting, M. Christopher; Burken, John J.; Lee, Seung-Hee (Technical Monitor)
2001-01-01
In the event of a control surface failure, the purpose of a reconfigurable control system is to redistribute the control effort among the remaining working surfaces such that satisfactory stability and performance are retained. An Off-line Nonlinear General Constrained Optimization (ONCO) approach was used for the reconfigurable X-33 control design method. Three example failures are shown using a high fidelity 6 DOF simulation (case I ascent with a left body flap jammed at 25 deg.; case 2 entry with a right inboard elevon jam at 25 deg.; and case 3, landing (TAEM) with a left rudder jam at -30 deg.) Failure comparisons between responses with the nominal controller and reconfigurable controllers show the benefits of reconfiguration. Single jam aerosurface failures were considered, and failure detection and identification is considered accomplished in the actuator controller. The X-33 flight control system will incorporate reconfigurable flight control in the baseline system.
Real-time diagnostics of the reusable rocket engine using on-line system identification
NASA Technical Reports Server (NTRS)
Guo, T.-H.; Merrill, W.; Duyar, A.
1990-01-01
A model-based failure diagnosis system has been proposed for real-time diagnosis of SSME failures. Actuation, sensor, and system degradation failure modes are all considered by the proposed system. In the case of SSME actuation failures, it was shown that real-time identification can effectively be used for failure diagnosis purposes. It is a direct approach since it reduces the detection, isolation, and the estimation of the extent of the failures to the comparison of parameter values before and after the failure. As with any model-based failure detection system, the proposed approach requires a fault model that embodies the essential characteristics of the failure process. The proposed diagnosis approach has the added advantage that it can be used as part of an intelligent control system for failure accommodation purposes.
Mobile Phone Service Process Hiccups at Cellular Inc.
ERIC Educational Resources Information Center
Edgington, Theresa M.
2010-01-01
This teaching case documents an actual case of process execution and failure. The case is useful in MIS introductory courses seeking to demonstrate the interdependencies within a business process, and the concept of cascading failure at the process level. This case demonstrates benefits and potential problems with information technology systems,…
X-framework: Space system failure analysis framework
NASA Astrophysics Data System (ADS)
Newman, John Steven
Space program and space systems failures result in financial losses in the multi-hundred million dollar range every year. In addition to financial loss, space system failures may also represent the loss of opportunity, loss of critical scientific, commercial and/or national defense capabilities, as well as loss of public confidence. The need exists to improve learning and expand the scope of lessons documented and offered to the space industry project team. One of the barriers to incorporating lessons learned include the way in which space system failures are documented. Multiple classes of space system failure information are identified, ranging from "sound bite" summaries in space insurance compendia, to articles in journals, lengthy data-oriented (what happened) reports, and in some rare cases, reports that treat not only the what, but also the why. In addition there are periodically published "corporate crisis" reports, typically issued after multiple or highly visible failures that explore management roles in the failure, often within a politically oriented context. Given the general lack of consistency, it is clear that a good multi-level space system/program failure framework with analytical and predictive capability is needed. This research effort set out to develop such a model. The X-Framework (x-fw) is proposed as an innovative forensic failure analysis approach, providing a multi-level understanding of the space system failure event beginning with the proximate cause, extending to the directly related work or operational processes and upward through successive management layers. The x-fw focus is on capability and control at the process level and examines: (1) management accountability and control, (2) resource and requirement allocation, and (3) planning, analysis, and risk management at each level of management. The x-fw model provides an innovative failure analysis approach for acquiring a multi-level perspective, direct and indirect causation of failures, and generating better and more consistent reports. Through this approach failures can be more fully understood, existing programs can be evaluated and future failures avoided. The x-fw development involved a review of the historical failure analysis and prevention literature, coupled with examination of numerous failure case studies. Analytical approaches included use of a relational failure "knowledge base" for classification and sorting of x-fw elements and attributes for each case. In addition a novel "management mapping" technique was developed as a means of displaying an integrated snapshot of indirect causes within the management chain. Further research opportunities will extend the depth of knowledge available for many of the component level cases. In addition, the x-fw has the potential to expand the scope of space sector lessons learned, and contribute to knowledge management and organizational learning.
Methods and Case Studies for Teaching and Learning about Failure and Safety.
ERIC Educational Resources Information Center
Bignell, Victor
1999-01-01
Discusses methods for analyzing case studies of failures of technological systems. Describes two distance learning courses that compare standard models of failure and success with the actuality of given scenarios. Provides teaching and learning materials and information sources for application to aspects of design, manufacture, inspection, use,…
Tourkmani, Abdo Karim; Sánchez-Huerta, Valeria; De Wit, Guillermo; Martínez, Jaime D; Mingo, David; Mahillo-Fernández, Ignacio; Jiménez-Alfaro, Ignacio
2017-01-01
To analyze the relationship between the score obtained in the Risk Score System (RSS) proposed by Hicks et al with penetrating keratoplasty (PKP) graft failure at 1y postoperatively and among each factor in the RSS with the risk of PKP graft failure using univariate and multivariate analysis. The retrospective cohort study had 152 PKPs from 152 patients. Eighteen cases were excluded from our study due to primary failure (10 cases), incomplete medical notes (5 cases) and follow-up less than 1y (3 cases). We included 134 PKPs from 134 patients stratified by preoperative risk score. Spearman coefficient was calculated for the relationship between the score obtained and risk of failure at 1y. Univariate and multivariate analysis were calculated for the impact of every single risk factor included in the RSS over graft failure at 1y. Spearman coefficient showed statistically significant correlation between the score in the RSS and graft failure ( P <0.05). Multivariate logistic regression analysis showed no statistically significant relationship ( P >0.05) between diagnosis and lens status with graft failure. The relationship between the other risk factors studied and graft failure was significant ( P <0.05), although the results for previous grafts and graft failure was unreliable. None of our patients had previous blood transfusion, thus, it had no impact. After the application of multivariate analysis techniques, some risk factors do not show the expected impact over graft failure at 1y.
Tourkmani, Abdo Karim; Sánchez-Huerta, Valeria; De Wit, Guillermo; Martínez, Jaime D.; Mingo, David; Mahillo-Fernández, Ignacio; Jiménez-Alfaro, Ignacio
2017-01-01
AIM To analyze the relationship between the score obtained in the Risk Score System (RSS) proposed by Hicks et al with penetrating keratoplasty (PKP) graft failure at 1y postoperatively and among each factor in the RSS with the risk of PKP graft failure using univariate and multivariate analysis. METHODS The retrospective cohort study had 152 PKPs from 152 patients. Eighteen cases were excluded from our study due to primary failure (10 cases), incomplete medical notes (5 cases) and follow-up less than 1y (3 cases). We included 134 PKPs from 134 patients stratified by preoperative risk score. Spearman coefficient was calculated for the relationship between the score obtained and risk of failure at 1y. Univariate and multivariate analysis were calculated for the impact of every single risk factor included in the RSS over graft failure at 1y. RESULTS Spearman coefficient showed statistically significant correlation between the score in the RSS and graft failure (P<0.05). Multivariate logistic regression analysis showed no statistically significant relationship (P>0.05) between diagnosis and lens status with graft failure. The relationship between the other risk factors studied and graft failure was significant (P<0.05), although the results for previous grafts and graft failure was unreliable. None of our patients had previous blood transfusion, thus, it had no impact. CONCLUSION After the application of multivariate analysis techniques, some risk factors do not show the expected impact over graft failure at 1y. PMID:28393027
Accurate Prediction of Motor Failures by Application of Multi CBM Tools: A Case Study
NASA Astrophysics Data System (ADS)
Dutta, Rana; Singh, Veerendra Pratap; Dwivedi, Jai Prakash
2018-02-01
Motor failures are very difficult to predict accurately with a single condition-monitoring tool as both electrical and the mechanical systems are closely related. Electrical problem, like phase unbalance, stator winding insulation failures can, at times, lead to vibration problem and at the same time mechanical failures like bearing failure, leads to rotor eccentricity. In this case study of a 550 kW blower motor it has been shown that a rotor bar crack was detected by current signature analysis and vibration monitoring confirmed the same. In later months in a similar motor vibration monitoring predicted bearing failure and current signature analysis confirmed the same. In both the cases, after dismantling the motor, the predictions were found to be accurate. In this paper we will be discussing the accurate predictions of motor failures through use of multi condition monitoring tools with two case studies.
Zorn, Kevin C; Gofrit, Ofer N; Orvieto, Marcelo A; Mikhail, Albert A; Galocy, R Matthew; Shalhav, Arieh L; Zagaja, Gregory P
2007-11-01
Previous reports have suggested that a 2% to 5% device failure rate (FR) be quoted when counseling patients about robot-assisted laparoscopic radical prostatectomy (RLRP). We sought to evaluate our FR on the da Vinci system. Since February 2003, more than 800 RLRPs have been performed at our institution using a single three-armed robotic unit. A prospective database was analyzed to determine the device FR and whether it resulted in case abortion or open conversion. Intuitive Surgical Systems provided data concerning the system's performance, including its fault rate. Error messages were classified as recoverable and non-recoverable faults. Between February 2003 and November 2006, 725 RLRP cases were available for evaluation. There were no intraoperative device failures that resulted in a case conversion. Technical errors resulting in surgeon handicap occurred in 3 cases (0.4%). Four patients (0.5%) had their procedures aborted secondary to system failure at initial set-up prior to patient entrance to the operating room. Data analysis retrieved from the da Vinci console reported on a total of 807 procedures since 2003. Only 4 cases (0.4%) were reported from the Intuitive Surgical database to result in either an aborted or a converted case, which compares favorably with our results. Since the last computer system upgrade (September 2005), the mean recoverable and non-recoverable fault rates per procedure were 0.21 and 0.05, respectively. For all the advanced features the da Vinci system offers, it is surprisingly reliable. Throughout our RLRP experience, device failure resulted in case conversion, procedure abortion, and surgeon handicap in 0, 0.5%, and 0.4% of procedures, respectively. As such, a lowered device FR of 0.5% should be used when counseling patients undergoing RLRP. To avoid futile general anesthesia, a policy should be enforced to ensure that the da Vinci system is completely set up before the patient enters the operating room.
Health information systems: failure, success and improvisation.
Heeks, Richard
2006-02-01
The generalised assumption of health information systems (HIS) success is questioned by a few commentators in the medical informatics field. They point to widespread HIS failure. The purpose of this paper was therefore to develop a better conceptual foundation for, and practical guidance on, health information systems failure (and success). Literature and case analysis plus pilot testing of developed model. Defining HIS failure and success is complex, and the current evidence base on HIS success and failure rates was found to be weak. Nonetheless, the best current estimate is that HIS failure is an important problem. The paper therefore derives and explains the "design-reality gap" conceptual model. This is shown to be robust in explaining multiple cases of HIS success and failure, yet provides a contingency that encompasses the differences which exist in different HIS contexts. The design-reality gap model is piloted to demonstrate its value as a tool for risk assessment and mitigation on HIS projects. It also throws into question traditional, structured development methodologies, highlighting the importance of emergent change and improvisation in HIS. The design-reality gap model can be used to address the problem of HIS failure, both as a post hoc evaluative tool and as a pre hoc risk assessment and mitigation tool. It also validates a set of methods, techniques, roles and competencies needed to support the dynamic improvisations that are found to underpin cases of HIS success.
76 FR 73481 - Airworthiness Directives; Bombardier, Inc. Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-29
... gear from extending in the case of a failure of the normal MLG extension/retraction system... failure of the normal MLG extension/retraction system. This [Transport Canada Civil Aviation] directive is... MLG extension/retraction system. * * * * * The unsafe condition is loss of control during landing...
1987-08-26
example, expert systems research would benefit examples are the Acute Renal Failure [15] system, the if it could attract statisticians to assist in...research projects including the Acute Renal Failure [15] system, the 6. EXPLAINING COMPLEX REASONING INTERNIST-] [22] system for diagnosis within the...the MEDAS and Acute Renal Failure systems. task at any point in reasoning about a case is constrained to Entropy-discriminate makes use of a measure
A review of wiring system safety in space power systems
NASA Technical Reports Server (NTRS)
Stavnes, Mark W.; Hammoud, Ahmad N.
1993-01-01
Wiring system failures have resulted from arc propagation in the wiring harnesses of current aerospace vehicles. These failures occur when the insulation becomes conductive upon the initiation of an arc. In some cases, the conductive path of the carbon arc track displays a high enough resistance such that the current is limited, and therefore may be difficult to detect using conventional circuit protection. Often, such wiring failures are not simply the result of insulation failure, but are due to a combination of wiring system factors. Inadequate circuit protection, unforgiving system designs, and careless maintenance procedures can contribute to a wiring system failure. This paper approaches the problem with respect to the overall wiring system, in order to determine what steps can be taken to improve the reliability, maintainability, and safety of space power systems. Power system technologies, system designs, and maintenance procedures which have led to past wiring system failures will be discussed. New technologies, design processes, and management techniques which may lead to improved wiring system safety will be introduced.
Wong, Kam Cheong
2016-04-06
Clinicians use various clinical reasoning tools such as Ishikawa diagram to enhance their clinical experience and reasoning skills. Failure mode and effects analysis, which is an engineering methodology in origin, can be modified and applied to provide inputs into an Ishikawa diagram. The human biliary system is used to illustrate a modified failure mode and effects analysis. The anatomical and physiological processes of the biliary system are reviewed. Failure is defined as an abnormality caused by infective, inflammatory, obstructive, malignancy, autoimmune and other pathological processes. The potential failures, their effect(s), main clinical features, and investigation that can help a clinician to diagnose at each anatomical part and physiological process are reviewed and documented in a modified failure mode and effects analysis table. Relevant medical and surgical cases are retrieved from the medical literature and weaved into the table. A total of 80 clinical cases which are relevant to the modified failure mode and effects analysis for the human biliary system have been reviewed and weaved into a designated table. The table is the backbone and framework for further expansion. Reviewing and updating the table is an iterative and continual process. The relevant clinical features in the modified failure mode and effects analysis are then extracted and included in the relevant Ishikawa diagram. This article illustrates an application of engineering methodology in medicine, and it sows the seeds of potential cross-pollination between engineering and medicine. Establishing a modified failure mode and effects analysis can be a teamwork project or self-directed learning process, or a mix of both. Modified failure mode and effects analysis can be deployed to obtain inputs for an Ishikawa diagram which in turn can be used to enhance clinical experiences and clinical reasoning skills for clinicians, medical educators, and students.
de Vries, Arjen E; van der Wal, Martje Hl; Bedijn, Wendy; de Jong, Richard M; van Dijk, Rene B; Hillege, Hans L; Jaarsma, Tiny
2012-12-01
In the last decades, the introduction of information and communication technology (ICT) in healthcare promised an improved quality of care while reducing workload and improving cost-effectiveness. This might be realised by the use of computer guided decision support systems and telemonitoring. This case study describes the process of care of a patient with chronic heart failure, who was treated with a computerised disease management system in combination with telemonitoring. With the help of these appliances, we think we were probably able to prevent at least two readmissions for heart failure in a period of 10 months. We also gained more insight into patient's behaviour with regards to compliance with the heart failure regimen at home. Frequent contact at distance and the online availability of physiological measurements at home facilitated patient tailored education and helped the patient to react adequately to symptoms of deterioration. Additionally, up-titration of heart failure medication was performed without contacting the patient at the outpatient clinic.
NASA Astrophysics Data System (ADS)
Ishikawa, Kaoru; Nakamura, Taro; Osumi, Hisashi
A reliable control method is proposed for multiple loop control system. After a feedback loop failure, such as case of the sensor break down, the control system becomes unstable and has a big fluctuation even if it has a disturbance observer. To cope with this problem, the proposed method uses an equivalent transfer function (ETF) as active redundancy compensation after the loop failure. The ETF is designed so that it does not change the transfer function of the whole system before and after the loop failure. In this paper, the characteristic of reliable control system that uses an ETF and a disturbance observer is examined by the experiment that uses the DC servo motor for the current feedback loop failure in the position servo system.
Hybrid neural intelligent system to predict business failure in small-to-medium-size enterprises.
Borrajo, M Lourdes; Baruque, Bruno; Corchado, Emilio; Bajo, Javier; Corchado, Juan M
2011-08-01
During the last years there has been a growing need of developing innovative tools that can help small to medium sized enterprises to predict business failure as well as financial crisis. In this study we present a novel hybrid intelligent system aimed at monitoring the modus operandi of the companies and predicting possible failures. This system is implemented by means of a neural-based multi-agent system that models the different actors of the companies as agents. The core of the multi-agent system is a type of agent that incorporates a case-based reasoning system and automates the business control process and failure prediction. The stages of the case-based reasoning system are implemented by means of web services: the retrieval stage uses an innovative weighted voting summarization of self-organizing maps ensembles-based method and the reuse stage is implemented by means of a radial basis function neural network. An initial prototype was developed and the results obtained related to small and medium enterprises in a real scenario are presented.
Transtibial prosthesis suspension failure during skydiving freefall: a case report.
Gordon, Assaf T; Land, Rebekah M
2009-01-01
This report describes the unusual case of an everyday-use prosthesis suspension system failure during the freefall phase of a skydiving jump. The case individual was a 53-year-old male with a left transtibial amputation secondary to trauma. He used his everyday prosthesis, a transtibial endoskeleton with push-button, plunger-releasing, pin-locking silicon liner suction suspension and a neoprene knee suspension sleeve, for a standard recreational tandem skydive. Within seconds of exiting the plane, the suspension systems failed, resulting in the complete prosthesis floating away. Several factors may have led to suspension system failure, including an inadequate seal and material design of the knee suspension sleeve and liner, lack of auxiliary suspension mechanisms, and lack of a safety cover overlying the push-button release mechanism. This is the first report, to our knowledge, to discuss prosthetic issues specifically related to skydiving. While amputees are to be encouraged to participate in this extreme sport, special modifications to everyday components may be necessary to reduce the possibility of prosthesis failure during freefall, parachute deployment, and landing.
Determinants of performance failure in the nursing home industry☆
Zinn, Jacqueline; Mor, Vincent; Feng, Zhanlian; Intrator, Orna
2013-01-01
This study investigates the determinants of performance failure in U.S. nursing homes. The sample consisted of 91,168 surveys from 10,901 facilities included in the Online Survey Certification and Reporting system from 1996 to 2005. Failed performance was defined as termination from the Medicare and Medicaid programs. Determinants of performance failure were identified as core structural change (ownership change), peripheral change (related diversification), prior financial and quality of care performance, size and environmental shock (Medicaid case mix reimbursement and prospective payment system introduction). Additional control variables that could contribute to the likelihood of performance failure were included in a cross-sectional time series generalized estimating equation logistic regression model. Our results support the contention, derived from structural inertia theory, that where in an organization’s structure change occurs determines whether it is adaptive or disruptive. In addition, while poor prior financial and quality performance and the introduction of case mix reimbursement increases the risk of failure, larger size is protective, decreasing the likelihood of performance failure. PMID:19128865
Determinants of performance failure in the nursing home industry.
Zinn, Jacqueline; Mor, Vincent; Feng, Zhanlian; Intrator, Orna
2009-03-01
This study investigates the determinants of performance failure in U.S. nursing homes. The sample consisted of 91,168 surveys from 10,901 facilities included in the Online Survey Certification and Reporting system from 1996 to 2005. Failed performance was defined as termination from the Medicare and Medicaid programs. Determinants of performance failure were identified as core structural change (ownership change), peripheral change (related diversification), prior financial and quality of care performance, size and environmental shock (Medicaid case mix reimbursement and prospective payment system introduction). Additional control variables that could contribute to the likelihood of performance failure were included in a cross-sectional time series generalized estimating equation logistic regression model. Our results support the contention, derived from structural inertia theory, that where in an organization's structure change occurs determines whether it is adaptive or disruptive. In addition, while poor prior financial and quality performance and the introduction of case mix reimbursement increases the risk of failure, larger size is protective, decreasing the likelihood of performance failure.
Failure detection and identification
NASA Technical Reports Server (NTRS)
Massoumnia, Mohammad-Ali; Verghese, George C.; Willsky, Alan S.
1989-01-01
Using the geometric concept of an unobservability subspace, a solution is given to the problem of detecting and identifying control system component failures in linear, time-invariant systems. Conditions are developed for the existence of a causal, linear, time-invariant processor that can detect and uniquely identify a component failure, first for the case where components can fail simultaneously, and then for the case where they fail only one at a time. Explicit design algorithms are provided when these conditions are satisfied. In addition to time-domain solvability conditions, frequency-domain interpretations of the results are given, and connections are drawn with results already available in the literature.
[Corrected transposition of the great arteries].
Alva-Espinosa, Carlos
2016-01-01
Corrected transposition of the great arteries is one of the most fascinating entities in congenital heart disease. The apparent corrected condition is only temporal. Over time, most patients develop systemic heart failure, even in the absence of associated lesions. With current imaging studies, precise visualization is achieved in each case though the treatment strategy remains unresolved. In asymptomatic patients or cases without associated lesions, focalized follow-up to assess systemic ventricular function and the degree of tricuspid valve regurgitation is important. In cases with normal ventricular function and mild tricuspid failure, it seems unreasonable to intervene surgically. In patients with significant associated lesions, surgery is indicated. In the long term, the traditional approach may not help tricuspid regurgitation and systemic ventricular failure. Anatomical correction is the proposed alternative to ease the right ventricle overload and to restore the systemic left ventricular function. However, this is a prolonged operation and not without risks and long-term complications. In this review the clinical, diagnostic, and therapeutic aspects are overviewed in the light of the most significant and recent literature.
Rodriguez-Gonzalez, Moises; Segado-Arenas, Antonio; Matamala-Morillo, Miguel A
2016-08-01
Pulmonary sequestration is an unusual cause of heart failure in infants. We report a preterm newborn with signs of congestive heart failure supposed secondary to a ductus arteriosus that was finally diagnosed as a coexistent extralobar pulmonary sequestration. In this case, Doppler echocardiography was essential for diagnosis, revealing an abnormal systemic arterial supply to the sequestered lung and abnormal venous drainage. © 2016, Wiley Periodicals, Inc.
Bounding the Failure Probability Range of Polynomial Systems Subject to P-box Uncertainties
NASA Technical Reports Server (NTRS)
Crespo, Luis G.; Kenny, Sean P.; Giesy, Daniel P.
2012-01-01
This paper proposes a reliability analysis framework for systems subject to multiple design requirements that depend polynomially on the uncertainty. Uncertainty is prescribed by probability boxes, also known as p-boxes, whose distribution functions have free or fixed functional forms. An approach based on the Bernstein expansion of polynomials and optimization is proposed. In particular, we search for the elements of a multi-dimensional p-box that minimize (i.e., the best-case) and maximize (i.e., the worst-case) the probability of inner and outer bounding sets of the failure domain. This technique yields intervals that bound the range of failure probabilities. The offset between this bounding interval and the actual failure probability range can be made arbitrarily tight with additional computational effort.
Rocket engine diagnostics using qualitative modeling techniques
NASA Technical Reports Server (NTRS)
Binder, Michael; Maul, William; Meyer, Claudia; Sovie, Amy
1992-01-01
Researchers at NASA Lewis Research Center are presently developing qualitative modeling techniques for automated rocket engine diagnostics. A qualitative model of a turbopump interpropellant seal system has been created. The qualitative model describes the effects of seal failures on the system steady-state behavior. This model is able to diagnose the failure of particular seals in the system based on anomalous temperature and pressure values. The anomalous values input to the qualitative model are generated using numerical simulations. Diagnostic test cases include both single and multiple seal failures.
Rocket engine diagnostics using qualitative modeling techniques
NASA Technical Reports Server (NTRS)
Binder, Michael; Maul, William; Meyer, Claudia; Sovie, Amy
1992-01-01
Researchers at NASA Lewis Research Center are presently developing qualitative modeling techniques for automated rocket engine diagnostics. A qualitative model of a turbopump interpropellant seal system was created. The qualitative model describes the effects of seal failures on the system steady state behavior. This model is able to diagnose the failure of particular seals in the system based on anomalous temperature and pressure values. The anomalous values input to the qualitative model are generated using numerical simulations. Diagnostic test cases include both single and multiple seal failures.
NASA Astrophysics Data System (ADS)
Eck, M.; Mukunda, M.
The proliferation of space vehicle launch sites and the projected utilization of these facilities portends an increase in the number of on-pad, ascent, and on-orbit solid-rocket motor (SRM) casings and liquid-rocket tanks which will randomly fail or will fail from range destruct actions. Beyond the obvious safety implications, these failures may have serious resource implications for mission system and facility planners. SRM-casing failures and liquid-rocket tankage failures result in the generation of large, high velocity fragments which may be serious threats to the safety of launch support personnel if proper bunkers and exclusion areas are not provided. In addition, these fragments may be indirect threats to the general public's safety if they encounter hazardous spacecraft payloads which have not been designed to withstand shrapnel of this caliber. They may also become threats to other spacecraft if, by failing on-orbit, they add to the ever increasing space-junk collision cross-section. Most prior attempts to assess the velocity of fragments from failed SRM casings have simply assigned the available chamber impulse to available casing and fuel mass and solved the resulting momentum balance for velocity. This method may predict a fragment velocity which is high or low by a factor of two depending on the ratio of fuel to casing mass extant at the time of failure. Recognizing the limitations of existing methods, the authors devised an analytical approach which properly partitions the available impulse to each major system-mass component. This approach uses the Physics International developed PISCES code to couple the forces generated by an Eulerian modeled gas flow field to a Lagrangian modeled fuel and casing system. The details of a predictive analytical modeling process as well as the development of normalized relations for momentum partition as a function of SRM burn time and initial geometry are discussed in this paper. Methods for applying similar modeling techniques to liquid-tankage-over-pressure failures are also discussed. These methods have been calibrated against observed SRM ascent failures and on-orbit tankage failures. Casing-quadrant sized fragments with velocities exceeding 100 m/s resulted from Titan 34D-SRM range destruct actions at 10 s mission elapsed time (MET). Casing-quadrant sized fragments with velocities of approx. 200 m/s resulted from STS-SRM range destruct actions at 110 s MET. Similar sized fragments for Ariane third stage and Delta second stage tankage were predicted to have maximum velocities of 260 and 480 m/s respectively. Good agreement was found between the predictions and observations for five specific events and it was concluded that the methods developed have good potential for use in predicting the fragmentation process of a number of generically similar casing and tankage systems.
Maslow, Andrew; Schwartz, Carl; Mahmood, Feroze; Singh, Arun; Heerdt, Paul M
2009-07-01
In this report, a case of right ventricular (RV) failure, hemodynamic instability, and systemic organ failure is described to highlight how paradoxical ventricular systolic septal motion (PVSM), or a rightward systolic displacement of the interventricular septum, may contribute to RV ejection. Multiple inotropic medications and vasopressors were administered to treat right heart failure and systemic hypotension in a patient following combined aortic and mitral valve replacement. In the early postoperative period, echocardiographic evaluation revealed adequate left ventricular systolic function, akinesis of the RV myocardial tissues, and PVSM. In the presence of PVSM, RV fractional area of contraction was > or =35% despite akinesis of the primary RV myocardial walls. The PVSM appeared to contribute toward RV ejection. As a result, the need for multiple inotropes was re-evaluated, in considering that end-organ dysfunction was the result of systemic hypotension and prolonged vasopressor administration. After discontinuation of phosphodiesterase inhibitors, native vascular tone returned and the need for vasopressors declined. This was followed by recovery of systemic organ function. Echocardiographic re-evaluation two years later, revealed persistent akinesis of the RV myocardial tissues and PVSM, the latter appearing to contribute toward RV ejection. This case highlights the importance of left to RV interactions, and how PVSM may mediate these hemodynamic interactions.
Reliability analysis based on the losses from failures.
Todinov, M T
2006-04-01
The conventional reliability analysis is based on the premise that increasing the reliability of a system will decrease the losses from failures. On the basis of counterexamples, it is demonstrated that this is valid only if all failures are associated with the same losses. In case of failures associated with different losses, a system with larger reliability is not necessarily characterized by smaller losses from failures. Consequently, a theoretical framework and models are proposed for a reliability analysis, linking reliability and the losses from failures. Equations related to the distributions of the potential losses from failure have been derived. It is argued that the classical risk equation only estimates the average value of the potential losses from failure and does not provide insight into the variability associated with the potential losses. Equations have also been derived for determining the potential and the expected losses from failures for nonrepairable and repairable systems with components arranged in series, with arbitrary life distributions. The equations are also valid for systems/components with multiple mutually exclusive failure modes. The expected losses given failure is a linear combination of the expected losses from failure associated with the separate failure modes scaled by the conditional probabilities with which the failure modes initiate failure. On this basis, an efficient method for simplifying complex reliability block diagrams has been developed. Branches of components arranged in series whose failures are mutually exclusive can be reduced to single components with equivalent hazard rate, downtime, and expected costs associated with intervention and repair. A model for estimating the expected losses from early-life failures has also been developed. For a specified time interval, the expected losses from early-life failures are a sum of the products of the expected number of failures in the specified time intervals covering the early-life failures region and the expected losses given failure characterizing the corresponding time intervals. For complex systems whose components are not logically arranged in series, discrete simulation algorithms and software have been created for determining the losses from failures in terms of expected lost production time, cost of intervention, and cost of replacement. Different system topologies are assessed to determine the effect of modifications of the system topology on the expected losses from failures. It is argued that the reliability allocation in a production system should be done to maximize the profit/value associated with the system. Consequently, a method for setting reliability requirements and reliability allocation maximizing the profit by minimizing the total cost has been developed. Reliability allocation that maximizes the profit in case of a system consisting of blocks arranged in series is achieved by determining for each block individually the reliabilities of the components in the block that minimize the sum of the capital, operation costs, and the expected losses from failures. A Monte Carlo simulation based net present value (NPV) cash-flow model has also been proposed, which has significant advantages to cash-flow models based on the expected value of the losses from failures per time interval. Unlike these models, the proposed model has the capability to reveal the variation of the NPV due to different number of failures occurring during a specified time interval (e.g., during one year). The model also permits tracking the impact of the distribution pattern of failure occurrences and the time dependence of the losses from failures.
Garrison, Laurel E; Kunz, Jasen M; Cooley, Laura A; Moore, Matthew R; Lucas, Claressa; Schrag, Stephanie; Sarisky, John; Whitney, Cynthia G
2016-06-10
The number of reported cases of Legionnaires' disease, a severe pneumonia caused by the bacterium Legionella, is increasing in the United States. During 2000-2014, the rate of reported legionellosis cases increased from 0.42 to 1.62 per 100,000 persons; 4% of reported cases were outbreak-associated. Legionella is transmitted through aerosolization of contaminated water. A new industry standard for prevention of Legionella growth and transmission in water systems in buildings was published in 2015. CDC investigated outbreaks of Legionnaires' disease to identify gaps in building water system maintenance and guide prevention efforts. Information from summaries of CDC Legionnaires' disease outbreak investigations during 2000-2014 was systematically abstracted, and water system maintenance deficiencies from land-based investigations were categorized as process failures, human errors, equipment failures, or unmanaged external changes. During 2000-2014, CDC participated in 38 field investigations of Legionnaires' disease. Among 27 land-based outbreaks, the median number of cases was 10 (range = 3-82) and median outbreak case fatality rate was 7% (range = 0%-80%). Sufficient information to evaluate maintenance deficiencies was available for 23 (85%) investigations. Of these, all had at least one deficiency; 11 (48%) had deficiencies in ≥2 categories. Fifteen cases (65%) were linked to process failures, 12 (52%) to human errors, eight (35%) to equipment failures, and eight (35%) to unmanaged external changes. Multiple common preventable maintenance deficiencies were identified in association with disease outbreaks, highlighting the importance of comprehensive water management programs for water systems in buildings. Properly implemented programs, as described in the new industry standard, could reduce Legionella growth and transmission, preventing Legionnaires' disease outbreaks and reducing disease.
46 CFR 58.05-10 - Automatic shut-off.
Code of Federal Regulations, 2010 CFR
2010-10-01
... AND RELATED SYSTEMS Main Propulsion Machinery § 58.05-10 Automatic shut-off. Main propulsion machinery... controls must shut down main propulsion machinery in case of a failure, such as failure of the lubricating...
46 CFR 58.05-10 - Automatic shut-off.
Code of Federal Regulations, 2011 CFR
2011-10-01
... AND RELATED SYSTEMS Main Propulsion Machinery § 58.05-10 Automatic shut-off. Main propulsion machinery... controls must shut down main propulsion machinery in case of a failure, such as failure of the lubricating...
46 CFR 58.05-10 - Automatic shut-off.
Code of Federal Regulations, 2014 CFR
2014-10-01
... AND RELATED SYSTEMS Main Propulsion Machinery § 58.05-10 Automatic shut-off. Main propulsion machinery... controls must shut down main propulsion machinery in case of a failure, such as failure of the lubricating...
46 CFR 58.05-10 - Automatic shut-off.
Code of Federal Regulations, 2012 CFR
2012-10-01
... AND RELATED SYSTEMS Main Propulsion Machinery § 58.05-10 Automatic shut-off. Main propulsion machinery... controls must shut down main propulsion machinery in case of a failure, such as failure of the lubricating...
46 CFR 58.05-10 - Automatic shut-off.
Code of Federal Regulations, 2013 CFR
2013-10-01
... AND RELATED SYSTEMS Main Propulsion Machinery § 58.05-10 Automatic shut-off. Main propulsion machinery... controls must shut down main propulsion machinery in case of a failure, such as failure of the lubricating...
The Expense Tied to Secondary Course Failure: The Case of Ontario
ERIC Educational Resources Information Center
Faubert, Brenton
2016-01-01
This article describes a study that examined the volume of secondary course failure and its direct budget impact on Ontario's K-12 public education system. The study employed a straightforward, descriptive accounting method to estimate the annual expenditure tied to secondary course failure, taking into account some factors known to be…
Back-Analyses of Landfill Instability Induced by High Water Level: Case Study of Shenzhen Landfill
Peng, Ren; Hou, Yujing; Zhan, Liangtong; Yao, Yangping
2016-01-01
In June 2008, the Shenzhen landfill slope failed. This case is used as an example to study the deformation characteristics and failure mode of a slope induced by high water levels. An integrated monitoring system, including water level gauges, electronic total stations, and inclinometers, was used to monitor the slope failure process. The field measurements suggest that the landfill landslide was caused by a deep slip along the weak interface of the composite liner system at the base of the landfill. The high water level is considered to be the main factor that caused this failure. To calculate the relative interface shear displacements in the geosynthetic multilayer liner system, a series of numerical direct shear tests were carried out. Based on the numerical results, the composite lining system simplified and the centrifuge modeling technique was used to quantitatively evaluate the effect of water levels on landfill instability. PMID:26771627
ASRM case insulation design and development
NASA Astrophysics Data System (ADS)
Bell, Matthew S.; Tam, William F. S.
1992-10-01
This paper describes the achievements made on the Advanced Solid Rocket Motor (ASRM) case insulation design and development program. The ASRM case insulation system described herein protects the metal case and joints from direct radiation and hot gas impingement. Critical failure of solid rocket systems is often traceable to failure of the insulation design. The wide ranging accomplishments included the development of a nonasbestos insulation material for ASRM that replaced the existing Redesigned Solid Rocket Motor (RSRM) asbestos-filled nitrile butadiene rubber (NBR) along with a performance gain of 300 pounds, and improved reliability of all the insulation joint designs, i.e., segmented case joint, case-to-nozzle and case-to-igniter joint. The insulation process development program included the internal stripwinding process. This process advancement allowed Aerojet to match to exceed the capability of other propulsion companies.
ASRM case insulation design and development
NASA Technical Reports Server (NTRS)
Bell, Matthew S.; Tam, William F. S.
1992-01-01
This paper describes the achievements made on the Advanced Solid Rocket Motor (ASRM) case insulation design and development program. The ASRM case insulation system described herein protects the metal case and joints from direct radiation and hot gas impingement. Critical failure of solid rocket systems is often traceable to failure of the insulation design. The wide ranging accomplishments included the development of a nonasbestos insulation material for ASRM that replaced the existing Redesigned Solid Rocket Motor (RSRM) asbestos-filled nitrile butadiene rubber (NBR) along with a performance gain of 300 pounds, and improved reliability of all the insulation joint designs, i.e., segmented case joint, case-to-nozzle and case-to-igniter joint. The insulation process development program included the internal stripwinding process. This process advancement allowed Aerojet to match to exceed the capability of other propulsion companies.
Code of Federal Regulations, 2014 CFR
2014-01-01
... usage. (b) Engine or drive system cooling fan blade protection. (1) If an engine or rotor drive system... fan blade fails. This must be shown by showing that— (i) The fan blades are contained in case of failure; (ii) Each fan is located so that a failure will not jeopardize safety; or (iii) Each fan blade...
Code of Federal Regulations, 2012 CFR
2012-01-01
... usage. (b) Engine or drive system cooling fan blade protection. (1) If an engine or rotor drive system... fan blade fails. This must be shown by showing that— (i) The fan blades are contained in case of failure; (ii) Each fan is located so that a failure will not jeopardize safety; or (iii) Each fan blade...
Code of Federal Regulations, 2010 CFR
2010-01-01
... usage. (b) Engine or drive system cooling fan blade protection. (1) If an engine or rotor drive system... fan blade fails. This must be shown by showing that— (i) The fan blades are contained in case of failure; (ii) Each fan is located so that a failure will not jeopardize safety; or (iii) Each fan blade...
Code of Federal Regulations, 2011 CFR
2011-01-01
... usage. (b) Engine or drive system cooling fan blade protection. (1) If an engine or rotor drive system... fan blade fails. This must be shown by showing that— (i) The fan blades are contained in case of failure; (ii) Each fan is located so that a failure will not jeopardize safety; or (iii) Each fan blade...
Code of Federal Regulations, 2013 CFR
2013-01-01
... usage. (b) Engine or drive system cooling fan blade protection. (1) If an engine or rotor drive system... fan blade fails. This must be shown by showing that— (i) The fan blades are contained in case of failure; (ii) Each fan is located so that a failure will not jeopardize safety; or (iii) Each fan blade...
Modeling joint restoration strategies for interdependent infrastructure systems.
Zhang, Chao; Kong, Jingjing; Simonovic, Slobodan P
2018-01-01
Life in the modern world depends on multiple critical services provided by infrastructure systems which are interdependent at multiple levels. To effectively respond to infrastructure failures, this paper proposes a model for developing optimal joint restoration strategy for interdependent infrastructure systems following a disruptive event. First, models for (i) describing structure of interdependent infrastructure system and (ii) their interaction process, are presented. Both models are considering the failure types, infrastructure operating rules and interdependencies among systems. Second, an optimization model for determining an optimal joint restoration strategy at infrastructure component level by minimizing the economic loss from the infrastructure failures, is proposed. The utility of the model is illustrated using a case study of electric-water systems. Results show that a small number of failed infrastructure components can trigger high level failures in interdependent systems; the optimal joint restoration strategy varies with failure occurrence time. The proposed models can help decision makers to understand the mechanisms of infrastructure interactions and search for optimal joint restoration strategy, which can significantly enhance safety of infrastructure systems.
Less than severe worst case accidents
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sanders, G.A.
1996-08-01
Many systems can provide tremendous benefit if operating correctly, produce only an inconvenience if they fail to operate, but have extreme consequences if they are only partially disabled such that they operate erratically or prematurely. In order to assure safety, systems are often tested against the most severe environments and accidents that are considered possible to ensure either safe operation or safe failure. However, it is often the less severe environments which result in the ``worst case accident`` since these are the conditions in which part of the system may be exposed or rendered unpredictable prior to total system failure.more » Some examples of less severe mechanical, thermal, and electrical environments which may actually be worst case are described as cautions for others in industries with high consequence operations or products.« less
NASA Astrophysics Data System (ADS)
Gan, Luping; Li, Yan-Feng; Zhu, Shun-Peng; Yang, Yuan-Jian; Huang, Hong-Zhong
2014-06-01
Failure mode, effects and criticality analysis (FMECA) and Fault tree analysis (FTA) are powerful tools to evaluate reliability of systems. Although single failure mode issue can be efficiently addressed by traditional FMECA, multiple failure modes and component correlations in complex systems cannot be effectively evaluated. In addition, correlated variables and parameters are often assumed to be precisely known in quantitative analysis. In fact, due to the lack of information, epistemic uncertainty commonly exists in engineering design. To solve these problems, the advantages of FMECA, FTA, fuzzy theory, and Copula theory are integrated into a unified hybrid method called fuzzy probability weighted geometric mean (FPWGM) risk priority number (RPN) method. The epistemic uncertainty of risk variables and parameters are characterized by fuzzy number to obtain fuzzy weighted geometric mean (FWGM) RPN for single failure mode. Multiple failure modes are connected using minimum cut sets (MCS), and Boolean logic is used to combine fuzzy risk priority number (FRPN) of each MCS. Moreover, Copula theory is applied to analyze the correlation of multiple failure modes in order to derive the failure probabilities of each MCS. Compared to the case where dependency among multiple failure modes is not considered, the Copula modeling approach eliminates the error of reliability analysis. Furthermore, for purpose of quantitative analysis, probabilities importance weight from failure probabilities are assigned to FWGM RPN to reassess the risk priority, which generalize the definition of probability weight and FRPN, resulting in a more accurate estimation than that of the traditional models. Finally, a basic fatigue analysis case drawn from turbine and compressor blades in aeroengine is used to demonstrate the effectiveness and robustness of the presented method. The result provides some important insights on fatigue reliability analysis and risk priority assessment of structural system under failure correlations.
Acute renal failure as a form of presentation of sarcoidosis in a young adult: a case report
2014-01-01
Introduction Sarcoidosis is a systemic granulomatous disease. Renal involvement is a rare initial presentation of this disease. Few articles on renal involvement as an initial presentation of sarcoidosis have been published in the literature. Case presentation A 26-year-old Caucasian woman presented with acute renal failure as an initial manifestation of sarcoidosis. Conclusions Renal involvement is an uncommon feature of sarcoidosis and it is essential to establish a fast and correct diagnosis because early therapy avoids progression to terminal renal failure. PMID:25124289
Synthesis of the unmanned aerial vehicle remote control augmentation system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tomczyk, Andrzej, E-mail: A.Tomczyk@prz.edu.pl
Medium size Unmanned Aerial Vehicle (UAV) usually flies as an autonomous aircraft including automatic take-off and landing phases. However in the case of the on-board control system failure, the remote steering is using as an emergency procedure. In this reason, remote manual control of unmanned aerial vehicle is used more often during take-of and landing phases. Depends on UAV take-off mass and speed (total energy) the potential crash can be very danger for airplane and environment. So, handling qualities of UAV is important from pilot-operator point of view. In many cases the dynamic properties of remote controlling UAV are notmore » suitable for obtaining the desired properties of the handling qualities. In this case the control augmentation system (CAS) should be applied. Because the potential failure of the on-board control system, the better solution is that the CAS algorithms are placed on the ground station computers. The method of UAV handling qualities shaping in the case of basic control system failure is presented in this paper. The main idea of this method is that UAV reaction on the operator steering signals should be similar - almost the same - as reaction of the 'ideal' remote control aircraft. The model following method was used for controller parameters calculations. The numerical example concerns the medium size MP-02A UAV applied as an aerial observer system.« less
NASA Technical Reports Server (NTRS)
Putcha, Chandra S.; Mikula, D. F. Kip; Dueease, Robert A.; Dang, Lan; Peercy, Robert L.
1997-01-01
This paper deals with the development of a reliability methodology to assess the consequences of using hardware, without failure analysis or corrective action, that has previously demonstrated that it did not perform per specification. The subject of this paper arose from the need to provide a detailed probabilistic analysis to calculate the change in probability of failures with respect to the base or non-failed hardware. The methodology used for the analysis is primarily based on principles of Monte Carlo simulation. The random variables in the analysis are: Maximum Time of Operation (MTO) and operation Time of each Unit (OTU) The failure of a unit is considered to happen if (OTU) is less than MTO for the Normal Operational Period (NOP) in which this unit is used. NOP as a whole uses a total of 4 units. Two cases are considered. in the first specialized scenario, the failure of any operation or system failure is considered to happen if any of the units used during the NOP fail. in the second specialized scenario, the failure of any operation or system failure is considered to happen only if any two of the units used during the MOP fail together. The probability of failure of the units and the system as a whole is determined for 3 kinds of systems - Perfect System, Imperfect System 1 and Imperfect System 2. in a Perfect System, the operation time of the failed unit is the same as that of the MTO. In an Imperfect System 1, the operation time of the failed unit is assumed as 1 percent of the MTO. In an Imperfect System 2, the operation time of the failed unit is assumed as zero. in addition, simulated operation time of failed units is assumed as 10 percent of the corresponding units before zero value. Monte Carlo simulation analysis is used for this study. Necessary software has been developed as part of this study to perform the reliability calculations. The results of the analysis showed that the predicted change in failure probability (P(sub F)) for the previously failed units is as high as 49 percent above the baseline (perfect system) for the worst case. The predicted change in system P(sub F) for the previously failed units is as high as 36% for single unit failure without any redundancy. For redundant systems, with dual unit failure, the predicted change in P(sub F) for the previously failed units is as high as 16%. These results will help management to make decisions regarding the consequences of using previously failed units without adequate failure analysis or corrective action.
Sensor failure detection for jet engines
NASA Technical Reports Server (NTRS)
Beattie, E. C.; Laprad, R. F.; Akhter, M. M.; Rock, S. M.
1983-01-01
Revisions to the advanced sensor failure detection, isolation, and accommodation (DIA) algorithm, developed under the sensor failure detection system program were studied to eliminate the steady state errors due to estimation filter biases. Three algorithm revisions were formulated and one revision for detailed evaluation was chosen. The selected version modifies the DIA algorithm to feedback the actual sensor outputs to the integral portion of the control for the nofailure case. In case of a failure, the estimates of the failed sensor output is fed back to the integral portion. The estimator outputs are fed back to the linear regulator portion of the control all the time. The revised algorithm is evaluated and compared to the baseline algorithm developed previously.
Reusable rocket engine intelligent control system framework design, phase 2
NASA Technical Reports Server (NTRS)
Nemeth, ED; Anderson, Ron; Ols, Joe; Olsasky, Mark
1991-01-01
Elements of an advanced functional framework for reusable rocket engine propulsion system control are presented for the Space Shuttle Main Engine (SSME) demonstration case. Functional elements of the baseline functional framework are defined in detail. The SSME failure modes are evaluated and specific failure modes identified for inclusion in the advanced functional framework diagnostic system. Active control of the SSME start transient is investigated, leading to the identification of a promising approach to mitigating start transient excursions. Key elements of the functional framework are simulated and demonstration cases are provided. Finally, the advanced function framework for control of reusable rocket engines is presented.
A Comparison of Two Approaches to Safety Analysis Based on Use Cases
NASA Astrophysics Data System (ADS)
Stålhane, Tor; Sindre, Guttorm
Engineering has a long tradition in analyzing the safety of mechanical, electrical and electronic systems. Important methods like HazOp and FMEA have also been adopted by the software engineering community. The misuse case method, on the other hand, has been developed by the software community as an alternative to FMEA and preliminary HazOp for software development. To compare the two methods misuse case and FMEA we have run a small experiment involving 42 third year software engineering students. In the experiment, the students should identify and analyze failure modes from one of the use cases for a commercial electronic patient journals system. The results of the experiment show that on the average, the group that used misuse cases identified and analyzed more user related failure modes than the persons using FMEA. In addition, the persons who used the misuse cases scored better on perceived ease of use and intention to use.
Modeling joint restoration strategies for interdependent infrastructure systems
Simonovic, Slobodan P.
2018-01-01
Life in the modern world depends on multiple critical services provided by infrastructure systems which are interdependent at multiple levels. To effectively respond to infrastructure failures, this paper proposes a model for developing optimal joint restoration strategy for interdependent infrastructure systems following a disruptive event. First, models for (i) describing structure of interdependent infrastructure system and (ii) their interaction process, are presented. Both models are considering the failure types, infrastructure operating rules and interdependencies among systems. Second, an optimization model for determining an optimal joint restoration strategy at infrastructure component level by minimizing the economic loss from the infrastructure failures, is proposed. The utility of the model is illustrated using a case study of electric-water systems. Results show that a small number of failed infrastructure components can trigger high level failures in interdependent systems; the optimal joint restoration strategy varies with failure occurrence time. The proposed models can help decision makers to understand the mechanisms of infrastructure interactions and search for optimal joint restoration strategy, which can significantly enhance safety of infrastructure systems. PMID:29649300
a New Method for Fmeca Based on Fuzzy Theory and Expert System
NASA Astrophysics Data System (ADS)
Byeon, Yoong-Tae; Kim, Dong-Jin; Kim, Jin-O.
2008-10-01
Failure Mode Effects and Criticality Analysis (FMECA) is one of most widely used methods in modern engineering system to investigate potential failure modes and its severity upon the system. FMECA evaluates criticality and severity of each failure mode and visualize the risk level matrix putting those indices to column and row variable respectively. Generally, those indices are determined subjectively by experts and operators. However, this process has no choice but to include uncertainty. In this paper, a method for eliciting expert opinions considering its uncertainty is proposed to evaluate the criticality and severity. In addition, a fuzzy expert system is constructed in order to determine the crisp value of risk level for each failure mode. Finally, an illustrative example system is analyzed in the case study. The results are worth considering in deciding the proper policies for each component of the system.
A Report on Simulation-Driven Reliability and Failure Analysis of Large-Scale Storage Systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wan, Lipeng; Wang, Feiyi; Oral, H. Sarp
High-performance computing (HPC) storage systems provide data availability and reliability using various hardware and software fault tolerance techniques. Usually, reliability and availability are calculated at the subsystem or component level using limited metrics such as, mean time to failure (MTTF) or mean time to data loss (MTTDL). This often means settling on simple and disconnected failure models (such as exponential failure rate) to achieve tractable and close-formed solutions. However, such models have been shown to be insufficient in assessing end-to-end storage system reliability and availability. We propose a generic simulation framework aimed at analyzing the reliability and availability of storagemore » systems at scale, and investigating what-if scenarios. The framework is designed for an end-to-end storage system, accommodating the various components and subsystems, their interconnections, failure patterns and propagation, and performs dependency analysis to capture a wide-range of failure cases. We evaluate the framework against a large-scale storage system that is in production and analyze its failure projections toward and beyond the end of lifecycle. We also examine the potential operational impact by studying how different types of components affect the overall system reliability and availability, and present the preliminary results« less
NASA Technical Reports Server (NTRS)
Phillips, D. T.; Manseur, B.; Foster, J. W.
1982-01-01
Alternate definitions of system failure create complex analysis for which analytic solutions are available only for simple, special cases. The GRASP methodology is a computer simulation approach for solving all classes of problems in which both failure and repair events are modeled according to the probability laws of the individual components of the system.
Failures in Hybrid Microcircuits During Environmental Testing. History Cases
NASA Technical Reports Server (NTRS)
Teverovsky, Alexander
2008-01-01
This purpose of this viewgraph presentation is to discuss failures in hermetic hybrids observed at the GSFC PA Lab during environmental stress testing. The cases discussed are: Case I. Substrate metallization failures during Thermal cycling (TC). Case II. Flex lid-induced failure. Case Ill. Hermeticity failures during TC. Case IV. Die metallization cracking during TC. and how many test cycles and parts is necessary? Case V. Wire Bond failures after life test. Case VI. Failures caused by Au/In IMC growth.
[Acute renal failure due to RAAS-inhibitors combined with dehydration].
Scherpbier, Nynke D; de Grauw, Wim J C; Wetzels, Jack F M; Vervoort, Gerald M M
2010-01-01
Two men (61 and 81 years old) with mild impaired kidney function developed acute renal failure due to dehydration combined with the use of inhibitors of the renin-angiotensin-aldosterone system (RAAS). After rehydration, correction of hyperkalaemia and stopping RAAS-inhibition and diuretics, they recovered completely. Many patients using RAAS-inhibitors have impaired renal function. In the case of dehydration due to gastroenteritis or prolonged fever they risk developing acute renal failure. The high risk groups are elderly patients, patients with atherosclerosis or heart failure and those with co-medication of diuretics or NSAIDs. The underlying mechanism is that the normal pathways to protect kidney perfusion in case of hypovolaemia are blocked by the use of RAAS-inhibitors or NSAIDs. In the case of dehydration in patients with chronic kidney disease using RAAS-inhibitors, serum creatinine and potassium levels should be monitored. Temporary discontinuation of RAAS-inhibitors or diuretics is often necessary.
A Taxonomy of Fallacies in System Safety Arguments
NASA Technical Reports Server (NTRS)
Greenwell, William S.; Knight, John C.; Holloway, C. Michael; Pease, Jacob J.
2006-01-01
Safety cases are gaining acceptance as assurance vehicles for safety-related systems. A safety case documents the evidence and argument that a system is safe to operate; however, logical fallacies in the underlying argument may undermine a system s safety claims. Removing these fallacies is essential to reduce the risk of safety-related system failure. We present a taxonomy of common fallacies in safety arguments that is intended to assist safety professionals in avoiding and detecting fallacious reasoning in the arguments they develop and review. The taxonomy derives from a survey of general argument fallacies and a separate survey of fallacies in real-world safety arguments. Our taxonomy is specific to safety argumentation, and it is targeted at professionals who work with safety arguments but may lack formal training in logic or argumentation. We discuss the rationale for the selection and categorization of fallacies in the taxonomy. In addition to its applications to the development and review of safety cases, our taxonomy could also support the analysis of system failures and promote the development of more robust safety case patterns.
Intelligent Case Based Decision Support System for Online Diagnosis of Automated Production System
NASA Astrophysics Data System (ADS)
Ben Rabah, N.; Saddem, R.; Ben Hmida, F.; Carre-Menetrier, V.; Tagina, M.
2017-01-01
Diagnosis of Automated Production System (APS) is a decision-making process designed to detect, locate and identify a particular failure caused by the control law. In the literature, there are three major types of reasoning for industrial diagnosis: the first is model-based, the second is rule-based and the third is case-based. The common and major limitation of the first and the second reasonings is that they do not have automated learning ability. This paper presents an interactive and effective Case Based Decision Support System for online Diagnosis (CB-DSSD) of an APS. It offers a synergy between the Case Based Reasoning (CBR) and the Decision Support System (DSS) in order to support and assist Human Operator of Supervision (HOS) in his/her decision process. Indeed, the experimental evaluation performed on an Interactive Training System for PLC (ITS PLC) that allows the control of a Programmable Logic Controller (PLC), simulating sensors or/and actuators failures and validating the control algorithm through a real time interactive experience, showed the efficiency of our approach.
SCADA alarms processing for wind turbine component failure detection
NASA Astrophysics Data System (ADS)
Gonzalez, E.; Reder, M.; Melero, J. J.
2016-09-01
Wind turbine failure and downtime can often compromise the profitability of a wind farm due to their high impact on the operation and maintenance (O&M) costs. Early detection of failures can facilitate the changeover from corrective maintenance towards a predictive approach. This paper presents a cost-effective methodology to combine various alarm analysis techniques, using data from the Supervisory Control and Data Acquisition (SCADA) system, in order to detect component failures. The approach categorises the alarms according to a reviewed taxonomy, turning overwhelming data into valuable information to assess component status. Then, different alarms analysis techniques are applied for two purposes: the evaluation of the SCADA alarm system capability to detect failures, and the investigation of the relation between components faults being followed by failure occurrences in others. Various case studies are presented and discussed. The study highlights the relationship between faulty behaviour in different components and between failures and adverse environmental conditions.
NASA Technical Reports Server (NTRS)
Vanschalkwyk, Christiaan Mauritz
1991-01-01
Many applications require that a control system must be tolerant to the failure of its components. This is especially true for large space-based systems that must work unattended and with long periods between maintenance. Fault tolerance can be obtained by detecting the failure of the control system component, determining which component has failed, and reconfiguring the system so that the failed component is isolated from the controller. Component failure detection experiments that were conducted on an experimental space structure, the NASA Langley Mini-Mast are presented. Two methodologies for failure detection and isolation (FDI) exist that do not require the specification of failure modes and are applicable to both actuators and sensors. These methods are known as the Failure Detection Filter and the method of Generalized Parity Relations. The latter method was applied to three different sensor types on the Mini-Mast. Failures were simulated in input-output data that were recorded during operation of the Mini-Mast. Both single and double sensor parity relations were tested and the effect of several design parameters on the performance of these relations is discussed. The detection of actuator failures is also treated. It is shown that in all the cases it is possible to identify the parity relations directly from input-output data. Frequency domain analysis is used to explain the behavior of the parity relations.
Health management system for rocket engines
NASA Technical Reports Server (NTRS)
Nemeth, Edward
1990-01-01
The functional framework of a failure detection algorithm for the Space Shuttle Main Engine (SSME) is developed. The basic algorithm is based only on existing SSME measurements. Supplemental measurements, expected to enhance failure detection effectiveness, are identified. To support the algorithm development, a figure of merit is defined to estimate the likelihood of SSME criticality 1 failure modes and the failure modes are ranked in order of likelihood of occurrence. Nine classes of failure detection strategies are evaluated and promising features are extracted as the basis for the failure detection algorithm. The failure detection algorithm provides early warning capabilities for a wide variety of SSME failure modes. Preliminary algorithm evaluation, using data from three SSME failures representing three different failure types, demonstrated indications of imminent catastrophic failure well in advance of redline cutoff in all three cases.
Rebholz, Casey M; Coresh, Josef; Ballew, Shoshana H; McMahon, Blaithin; Whelton, Seamus P; Selvin, Elizabeth; Grams, Morgan E
2015-08-01
Linkage to the US Renal Data System (USRDS) registry commonly is used to identify end-stage renal disease (ESRD) cases, or kidney failure treated with dialysis or transplantation, but it underestimates the total burden of kidney failure. This study validates a kidney failure definition that includes both kidney failure treated and not treated by dialysis or transplantation. It compares kidney failure risk factors and outcomes using this broader definition with USRDS-identified ESRD risk factors and outcomes. Diagnostic test study with stratified random sampling of hospitalizations for chart review. Atherosclerosis Risk in Communities Study (n=11,530; chart review, n=546). USRDS-identified ESRD; treated or untreated kidney failure defined by USRDS-identified ESRD or International Classification of Diseases, Ninth or Tenth Revision, Clinical Modification (ICD-9-CM/ICD-10-CM) code for hospitalization or death. For ESRD, determination of permanent dialysis therapy or transplantation; for kidney failure, determination of permanent dialysis therapy, transplantation, or estimated glomerular filtration rate < 15 mL/min/1.73 m(2). During 13 years' median follow-up, 508 kidney failure cases were identified, including 173 (34.1%) from the USRDS registry. ESRD and kidney failure incidence were 1.23 and 3.66 cases per 1,000 person-years in the overall population and 1.35 and 6.59 cases per 1,000 person-years among participants older than 70 years, respectively. Other risk-factor associations were similar between ESRD and kidney failure, except diabetes and albuminuria, which were stronger for ESRD. Survivals at 1 and 5 years were 74.0% and 24.0% for ESRD and 59.8% and 31.6% for kidney failure, respectively. Sensitivity and specificity were 88.0% and 97.3% comparing the kidney failure ICD-9-CM/ICD-10-CM code algorithm to chart review; for USRDS-identified ESRD, sensitivity and specificity were 94.9% and 100.0%. Some medical charts were incomplete. A kidney failure definition including treated and untreated disease identifies more cases than linkage to the USRDS registry alone, particularly among older adults. Future studies might consider reporting both USRDS-identified ESRD and a more inclusive kidney failure definition. Copyright © 2015 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.
Rebholz, Casey M.; Coresh, Josef; Ballew, Shoshana H.; McMahon, Blaithin; Whelton, Seamus P.; Selvin, Elizabeth; Grams, Morgan E.
2015-01-01
Background Linkage to the US Renal Data System (USRDS) registry is commonly used to identify end-stage renal disease (ESRD) cases, or kidney failure treated with dialysis or transplantation, but it underestimates the total burden of kidney failure. This study validates a kidney failure definition that includes both kidney failure treated and not treated by dialysis or transplantation. It compares kidney failure risk factors and outcomes using this broader definition to USRDS-identified ESRD risk factors and outcomes. Study Design Diagnostic test study with stratified random sampling of hospitalizations for chart review. Setting & Participants Atherosclerosis Risk in Communities Study (N=11,530; chart review n=546). Index Test USRDS-identified ESRD; treated or untreated kidney failure defined by USRDS-identified ESRD or International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM)/ICD-10-CM code from hospitalization or death. Reference Test For ESRD, determination of permanent dialysis or transplantation; for kidney failure, determination of permanent dialysis, transplantation, or eGFR <15 mL/min/1.73 m2. Results Over 13 years' median follow-up, 508 kidney failure cases were identified, including 173 (34.1%) from the USRDS registry. ESRD and kidney failure incidence were 1.23 and 3.66 cases per 1,000 person-years in the overall population, and 1.35 and 6.59 cases per 1,000 person-years among participants older than 70 years, respectively. Other risk factor associations were similar between ESRD and kidney failure, except diabetes and albuminuria which were stronger for ESRD. Survival at 1 and 5 years were 74.0% and 24.0% for ESRD and 59.8% and 31.6% for kidney failure, respectively. Sensitivity and specificity were 88.0% and 97.3% comparing the kidney failure ICD-9-CM/ICD-10-CM code algorithm to chart review; for USRDS-identified ESRD, sensitivity and specificity were 94.9% and 100.0%. Limitations Some medical charts were incomplete. Conclusions A kidney failure definition including treated and untreated disease identifies more cases than linkage to the USRDS registry alone, particularly among older adults. Future studies might consider reporting both USRDS-identified ESRD and a more inclusive kidney failure definition. PMID:25773483
Failure Diagnosis for the Holdup Tank System via ISFA
DOE Office of Scientific and Technical Information (OSTI.GOV)
Li, Huijuan; Bragg-Sitton, Shannon; Smidts, Carol
This paper discusses the use of the integrated system failure analysis (ISFA) technique for fault diagnosis for the holdup tank system. ISFA is a simulation-based, qualitative and integrated approach used to study fault propagation in systems containing both hardware and software subsystems. The holdup tank system consists of a tank containing a fluid whose level is controlled by an inlet valve and an outlet valve. We introduce the component and functional models of the system, quantify the main parameters and simulate possible failure-propagation paths based on the fault propagation approach, ISFA. The results show that most component failures in themore » holdup tank system can be identified clearly and that ISFA is viable as a technique for fault diagnosis. Since ISFA is a qualitative technique that can be used in the very early stages of system design, this case study provides indications that it can be used early to study design aspects that relate to robustness and fault tolerance.« less
Estimating distributions with increasing failure rate in an imperfect repair model.
Kvam, Paul H; Singh, Harshinder; Whitaker, Lyn R
2002-03-01
A failed system is repaired minimally if after failure, it is restored to the working condition of an identical system of the same age. We extend the nonparametric maximum likelihood estimator (MLE) of a system's lifetime distribution function to test units that are known to have an increasing failure rate. Such items comprise a significant portion of working components in industry. The order-restricted MLE is shown to be consistent. Similar results hold for the Brown-Proschan imperfect repair model, which dictates that a failed component is repaired perfectly with some unknown probability, and is otherwise repaired minimally. The estimators derived are motivated and illustrated by failure data in the nuclear industry. Failure times for groups of emergency diesel generators and motor-driven pumps are analyzed using the order-restricted methods. The order-restricted estimators are consistent and show distinct differences from the ordinary MLEs. Simulation results suggest significant improvement in reliability estimation is available in many cases when component failure data exhibit the IFR property.
Chromosomal aberrations in 2000 couples of Indian ethnicity with reproductive failure.
Gada Saxena, S; Desai, K; Shewale, L; Ranjan, P; Saranath, D
2012-08-01
Constitutional chromosomal aberrations contribute to infertility and repeated miscarriage leading to reproductive failure in couples. These aberrations may show no obvious clinical manifestations and remain undetected across multiple generations. However, infertility or recurrent spontaneous pregnancy loss, and/or genotypic/phenotypic aberrations may be manifested in the progeny during gametogenesis. The current study was a retrospective analysis to examine the chromosomal aberrations and prevalence in 2000 couples of Indian ethnicity with reproductive failure. Cytogenetic analysis via conventional G-band karyotyping analysis was carried out on phytohaemagglutinin stimulated peripheral blood lymphocytes, cultured in RPMI1640 medium. The chromosomes were enumerated as per International System for Human Cytogenetic Nomenclature at 500-550 band resolution, and recorded in the screening sheets. Chromosomal aberrations were detected in a total of 110 (2.78%) couples, with structural chromosomal aberrations in 88 cases including reciprocal translocations in 56 cases, Robertsonian translocations in 16 cases, inversions in eight cases, deletions in three cases, derivative chromosomes in five cases and numerical chromosome aberrations in 23 cases. The study emphasizes the importance of cytogenetic work up in both the partners associated with a history of reproductive failure. Genetic counselling with an option of prenatal diagnosis should be offered to couples with chromosomal aberrations. Copyright © 2012 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.
Failure-Time Distribution Of An m-Out-of-n System
NASA Technical Reports Server (NTRS)
Scheuer, Ernest M.
1988-01-01
Formulas for reliability extended to more general cases. Useful in analyses of reliabilities of practical systems and structures, especially of redundant systems of identical components, among which operating loads distributed equally.
Ueno, K; Fujimoto, S; Fujimoto, T; Nakano, H; Nakajima, T; Yamano, S; Shiiki, H; Hashimoto, T; Imoto, K; Miyagawa, S; Dohi, K
1999-10-01
A 50-year-old female was admitted to a local hospital because of dyspnea, and diagnosed as having left heart failure secondary to mitral regurgitation. After the improvement of congestive heart failure, polyarthralgia, fever, and positive anti-nuclear antibody were pointed out. She was referred to our hospital for the further evaluation. Serological test showed anti-double stranded DNA antibodies, anti-SS-A antibodies, anti-beta 2-GPI antibodies and biological false positive for syphilis. The diagnosis of SLE has been made from the clinical signs and the serology. Therefore mitral valvular lesion of this patient was considered to be one of the symptoms of SLE. We reported a rare case in which left heart failure was a initial clinical manifestation of SLE.
Decomposition-Based Failure Mode Identification Method for Risk-Free Design of Large Systems
NASA Technical Reports Server (NTRS)
Tumer, Irem Y.; Stone, Robert B.; Roberts, Rory A.; Clancy, Daniel (Technical Monitor)
2002-01-01
When designing products, it is crucial to assure failure and risk-free operation in the intended operating environment. Failures are typically studied and eliminated as much as possible during the early stages of design. The few failures that go undetected result in unacceptable damage and losses in high-risk applications where public safety is of concern. Published NASA and NTSB accident reports point to a variety of components identified as sources of failures in the reported cases. In previous work, data from these reports were processed and placed in matrix form for all the system components and failure modes encountered, and then manipulated using matrix methods to determine similarities between the different components and failure modes. In this paper, these matrices are represented in the form of a linear combination of failures modes, mathematically formed using Principal Components Analysis (PCA) decomposition. The PCA decomposition results in a low-dimensionality representation of all failure modes and components of interest, represented in a transformed coordinate system. Such a representation opens the way for efficient pattern analysis and prediction of failure modes with highest potential risks on the final product, rather than making decisions based on the large space of component and failure mode data. The mathematics of the proposed method are explained first using a simple example problem. The method is then applied to component failure data gathered from helicopter, accident reports to demonstrate its potential.
Failure propagation in multi-cell lithium ion batteries
Lamb, Joshua; Orendorff, Christopher J.; Steele, Leigh Anna M.; ...
2014-10-22
Traditionally, safety and impact of failure concerns of lithium ion batteries have dealt with the field failure of single cells. However, large and complex battery systems require the consideration of how a single cell failure will impact the system as a whole. Initial failure that leads to the thermal runaway of other cells within the system creates a much more serious condition than the failure of a single cell. This work examines the behavior of small modules of cylindrical and stacked pouch cells after thermal runaway is induced in a single cell through nail penetration trigger [1] within the module.more » Cylindrical cells are observed to be less prone to propagate, if failure propagates at all, owing to the limited contact between neighboring cells. However, the electrical connectivity is found to be impactful as the 10S1P cylindrical cell module did not show failure propagation through the module, while the 1S10P module had an energetic thermal runaway consuming the module minutes after the initiation failure trigger. Modules built using pouch cells conversely showed the impact of strong heat transfer between cells. In this case, a large surface area of the cells was in direct contact with its neighbors, allowing failure to propagate through the entire battery within 60-80 seconds for all configurations (parallel or series) tested. This work demonstrates the increased severity possible when a point failure impacts the surrounding battery system.« less
NASA Technical Reports Server (NTRS)
Anderson, Leif F.; Harrington, Sean P.; Omeke, Ojei, II; Schwaab, Douglas G.
2009-01-01
This is a case study on revised estimates of induced failure for International Space Station (ISS) on-orbit replacement units (ORUs). We devise a heuristic to leverage operational experience data by aggregating ORU, associated function (vehicle sub -system), and vehicle effective' k-factors using actual failure experience. With this input, we determine a significant failure threshold and minimize the difference between the actual and predicted failure rates. We conclude with a discussion on both qualitative and quantitative improvements the heuristic methods and potential benefits to ISS supportability engineering analysis.
A performance study of unmanned aerial vehicle-based sensor networks under cyber attack
NASA Astrophysics Data System (ADS)
Puchaty, Ethan M.
In UAV-based sensor networks, an emerging area of interest is the performance of these networks under cyber attack. This study seeks to evaluate the performance trade-offs from a System-of-Systems (SoS) perspective between various UAV communications architecture options in the context two missions: tracking ballistic missiles and tracking insurgents. An agent-based discrete event simulation is used to model a sensor communication network consisting of UAVs, military communications satellites, ground relay stations, and a mission control center. Network susceptibility to cyber attack is modeled with probabilistic failures and induced data variability, with performance metrics focusing on information availability, latency, and trustworthiness. Results demonstrated that using UAVs as routers increased network availability with a minimal latency penalty and communications satellite networks were best for long distance operations. Redundancy in the number of links between communication nodes helped mitigate cyber-caused link failures and add robustness in cases of induced data variability by an adversary. However, when failures were not independent, redundancy and UAV routing were detrimental in some cases to network performance. Sensitivity studies indicated that long cyber-caused downtimes and increasing failure dependencies resulted in build-ups of failures and caused significant degradations in network performance.
Nomoto, Shinichi; Utsumi, Momoe; Minakata, Kenji
2016-07-04
Since implantable left ventricular assist devices (LVAD) with smaller configurations became available for bridge-to-transplant or even destination therapy in patients with end-stage heart failure, an increasing number of patients with these devices are receiving home medical management. However, these patients may be anxious about potential complications such as pump failure, thromboembolism, and infections that may occur during home management. To provide a sense of security during home management of patients with LVAD and to establish an ideal shared-care system, we developed a patient-centered cloud-based home management system for patients with LVAD. In this case report, we describe this system and report a trial of it in a 64-year-old patient with an LVAD.
De Marco, Rocco; Aurilia, Pasquale; Mele, Alessandro
2009-01-01
To report a case of massive spontaneous choroidal hemorrhage in a patient with chronic renal failure and coronary artery disease treated with clopidogrel bisulfate (Plavix). Case report. A 75-year-old man presented with pain and loss of vision in the left eye for 1 week. His medical history was remarkable for systemic hypertension, chronic renal failure, and artery coronary disease. For 6 months, he had been taking 75 mg/day of Plavix after coronary angioplasty. Ocular examination revealed the patient to be in angle closure. Ultrasonography and computed tomography scan revealed a massive choroidal hemorrhage pushing the iris-lens diaphragm forward. Pain and intraocular pressure were treated successfully with evacuative sclerotomies, but the final exitus after 6 months was bulbar phthisis. Massive spontaneous choroidal hemorrhage is an extremely rare event that usually has been described in older patients (65-87 years old) receiving anticoagulants or thrombolytic agents. Systemic hypertension, generalized atherosclerosis, and age-related macular degeneration are additional risk factors. In the present case, massive choroidal hemorrhage was associated with use of clopidogrel bisulfate (Plavix) in a patient with chronic renal failure. Our report indicates that Plavix should be administered with caution in patients with chronic renal failure owing to the risk of serious choroidal bleeding. Chronic renal failure should be also included in the list of risk factors for massive spontaneous choroidal hemorrhage. Evacuative sclerotomies may have value in the relief of pain and elevated intraocular pressure but has not been shown to be beneficial in visual and anatomic outcomes.
PROBABILISTIC RISK ANALYSIS OF RADIOACTIVE WASTE DISPOSALS - a case study
NASA Astrophysics Data System (ADS)
Trinchero, P.; Delos, A.; Tartakovsky, D. M.; Fernandez-Garcia, D.; Bolster, D.; Dentz, M.; Sanchez-Vila, X.; Molinero, J.
2009-12-01
The storage of contaminant material in superficial or sub-superficial repositories, such as tailing piles for mine waste or disposal sites for low and intermediate nuclear waste, poses a potential threat for the surrounding biosphere. The minimization of these risks can be achieved by supporting decision-makers with quantitative tools capable to incorporate all source of uncertainty within a rigorous probabilistic framework. A case study is presented where we assess the risks associated to the superficial storage of hazardous waste close to a populated area. The intrinsic complexity of the problem, involving many events with different spatial and time scales and many uncertainty parameters is overcome by using a formal PRA (probabilistic risk assessment) procedure that allows decomposing the system into a number of key events. Hence, the failure of the system is directly linked to the potential contamination of one of the three main receptors: the underlying karst aquifer, a superficial stream that flows near the storage piles and a protection area surrounding a number of wells used for water supply. The minimal cut sets leading to the failure of the system are obtained by defining a fault-tree that incorporates different events including the failure of the engineered system (e.g. cover of the piles) and the failure of the geological barrier (e.g. clay layer that separates the bottom of the pile from the karst formation). Finally the probability of failure is quantitatively assessed combining individual independent or conditional probabilities that are computed numerically or borrowed from reliability database.
Congestive Heart Failure: A Case of Protein Misfolding
Ha, Chung-Eun; Bhagavan, Nadhipuram V; Loscalzo, Miki; Chan, Stephen K; Nguyen, Huy V; Rios, Carlos N
2014-01-01
This article describes an interesting case of a patient presenting with congestive heart failure found to have restrictive cardiomyopathy with initial laboratory evaluation showing hypogammaglobuminemia without a monoclonal band on serum and urine electrophoresis. This case highlights the clinically significant cardiac manifestation caused by protein misfolding, a defect in protein homeostasis. In addition, the utility of a relatively newer laboratory test, serum free light chains as well as the importance of clinical and pathophysiologic correlation is also discussed. We present a relatively uncommon cause of heart disease, cardiac amyloidosis in a patient with a systemic plasma cell dyscrasia, and multiple myeloma. PMID:24959390
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankamo, T.; Kim, I.S.; Yang, Ji Wu
Failures in the auxiliary feedwater (AFW) system of pressurized water reactors (PWRs) are considered to involve substantial risk whether a decision is made to either continue power operation while repair is being done, or to shut down the plant to undertake repairs. Technical specification action requirements usually require immediate plant shutdown in the case of multiple failures in the system (in some cases, immediate repair of one train is required when all AFW trains fail). This paper presents a probabilistic risk assessment-based method to quantitatively evaluate and compare both the risks of continued power operation and of shutting the plantmore » down, given known failures in the system. The method is applied to the AFW system for four different PWRs. Results show that the risk of continued power operation and plant shutdown both are substantial, but the latter is larger than the former over the usual repair time. This was proven for four plants with different designs: two operating Westinghouse plants, one operating Asea-Brown Boveri Combustion Engineering Plant, and one of evolutionary design. The method can be used to analyze individual plant design and to improve AFW action requirements using risk-informed evaluations.« less
NASA Technical Reports Server (NTRS)
Eck, Marshall; Mukunda, Meera
1988-01-01
A calculational method is described which provides a powerful tool for predicting solid rocket motor (SRM) casing and liquid rocket tankage fragmentation response. The approach properly partitions the available impulse to each major system-mass component. It uses the Pisces code developed by Physics International to couple the forces generated by an Eulerian-modeled gas flow field to a Lagrangian-modeled fuel and casing system. The details of the predictive analytical modeling process and the development of normalized relations for momentum partition as a function of SRM burn time and initial geometry are discussed. Methods for applying similar modeling techniques to liquid-tankage-overpressure failures are also discussed. Good agreement between predictions and observations are obtained for five specific events.
Non-Exertional Heatstroke: A Case Report and Review of the Literature
Mozzini, Chiara; Xotta, Giovanni; Garbin, Ulisse; Pasini, Anna Maria Fratta; Cominacini, Luciano
2017-01-01
Patient: Female, 41 Final Diagnosis: Heatstroke Symptoms: Coma Medication: — Clinical Procedure: Intensive Care Unit-Internal Medicine Specialty: Critical Care Medicine Objective: Rare co-existance of disease or pathology Background: Heatstroke (HS) is a life-threatening condition characterized by an elevation of the core body temperature above 40°C, central nervous system dysfunction, and possible multi-organ failure. HS can trigger systemic inflammation, disseminated intravascular coagulation (DIC), rhabdomyolysis, cerebral edema and seizures, pulmonary edema, heart dysfunctions, and renal and hepatic failure. Case Report: We report the case of a 41-year-old Romanian woman with a history of alcoholism who developed HS after arriving by bus in Verona, Italy in June 2016. The patient developed consecutive multi-organ dysfunction, including liver and renal failure, rhabdomyolysis, DIC, and arrhythmia. The patient was successfully treated with conservative measures. After 17 days, she recovered completely. Conclusions: The exact mechanism of HS-related multiple organ dysfunction is not completely understood and its pathogenesis is complex. It involves inflammation, oxidative stress, endoplasmic reticulum (ER) stress, and mitochondrial dysfunction. Development of a model in which chronic alcohol abuse alters oxidative, inflammatory, and ER stress response could also be a conceivable solution to the positive prognosis of severe HS patients, in which liver failure has a prominent role. PMID:28974669
Complications of varicella zoster.
Gücüyener, Kivilcim; Citak, Elvan Cağlar; Elli, Murat; Serdaroğlu, Ayse; Citak, Funda Erkasar
2002-02-01
Primary infection with varicella zoster is characterzed by a generalized vesicular rash usually without significant systemic illness. Encephalitis, pneumonitis, pancreatitis, nephritis, Reye and Guillan-Barre syndrome transvers myelitis, myocarditis have been reported before, but there is not any case having all these system to be involved during the same infection in a sequential manner ending up with multiorgan failure. We wanted to represent 21-month-old boy had a multiorgan failure due to varicella zoster infection.
[Cardiac failure in endocrine diseases].
Hashizume, K
1993-05-01
Several endocrine diseases show the symptoms of cardiac failure. Among them, patients with acromegaly show a specific cardiomyopathy which results in a severe left-sided cardiac failure. Hypoparathyroidism also induces cardiac failure, which is resulted from hypocalcemia and low levels of serum parathyroid hormone. In the cases of hypothyroidism, the patients with myxedemal coma show a severe cardiac failure, which is characterized by disturbance of central nervous system, renal function, and cardiac function. In the patients with thyroid crisis (storm), the cardiac failure comes from the great reduction of cardiac output with dehydration. The reduction of circulation volume, observed in the patients with pheochromocytoma easily induces cardiac failure (shock) just after the removal of adrenal tumor. In patients with malignant carcinoid syndrome, right-sided ventricular failure which may be occurred through the actions of biogenic amines is observed.
49 CFR 179.102-3 - Materials poisonous by inhalation.
Code of Federal Regulations, 2014 CFR
2014-10-01
... top fitting protection system and nozzle capable of sustaining, without failure, a rollover accident... geometric center of the loaded tank car as a transverse vector. Failure is deemed to occur when the deformed... any top fitting in the case of an accident where any top fitting would be sheared off. The tank nozzle...
49 CFR 179.102-3 - Materials poisonous by inhalation.
Code of Federal Regulations, 2013 CFR
2013-10-01
... top fitting protection system and nozzle capable of sustaining, without failure, a rollover accident... geometric center of the loaded tank car as a transverse vector. Failure is deemed to occur when the deformed... any top fitting in the case of an accident where any top fitting would be sheared off. The tank nozzle...
49 CFR 179.102-3 - Materials poisonous by inhalation.
Code of Federal Regulations, 2011 CFR
2011-10-01
... top fitting protection system and nozzle capable of sustaining, without failure, a rollover accident... geometric center of the loaded tank car as a transverse vector. Failure is deemed to occur when the deformed... any top fitting in the case of an accident where any top fitting would be sheared off. The tank nozzle...
49 CFR 179.102-3 - Materials poisonous by inhalation.
Code of Federal Regulations, 2012 CFR
2012-10-01
... top fitting protection system and nozzle capable of sustaining, without failure, a rollover accident... geometric center of the loaded tank car as a transverse vector. Failure is deemed to occur when the deformed... any top fitting in the case of an accident where any top fitting would be sheared off. The tank nozzle...
Waddell, J Neil; Payne, Alan G T; Swain, Michael V; Kieser, Jules A
2010-03-01
Soldered or cast bars are used as a standard of care in attachment systems supporting maxillary and mandibular implant overdentures. When failures of these bars occur, currently there is a lack of evidence in relation to their specific etiology, location, or nature. To investigate the failure process of a case series of six failed soldered bars, four intact soldered bars, and one intact cast milled bar, which had been supporting implant overdentures. A total of 11 different overdenture bars were removed from patients with different configuration of opposing arches. A failed bar (FB) group (n = 6) had failed soldered overdenture bars, which were recovered from patients following up to 2 years of wear before requiring prosthodontic maintenance and repair. An intact bar (IB) group (n = 5) had both soldered bars and a single cast milled bar, which had been worn by patients for 2 to 5 years prior to receiving other aspects of prosthodontic maintenance. All bars were examined using scanning electron microscopy to establish the possible mode of failure (FB) or to identify evidence of potential failure in the future (IB). Evidence of a progressive failure mode of corrosion fatigue and creep were observed on all the FB and IB usually around the solder areas and nonoxidizing gold cylinder. Fatigue and creep were also observed in all the IB. Where the level of corrosion was substantial, there was no evidence of wear from the matrices of the attachment system. Evidence of an instantaneous failure mode, ductile and brittle overload, was observed on the fracture surfaces of all the FB, within the solder and the nonoxidizing gold cylinders, at the solder/cylinder interface. Corrosion, followed by corrosion fatigue, appears to be a key factor in the onset of the failure process for overdenture bars in this case series of both maxillary and mandibular overdentures. Limited sample size and lack of standardization identify trends only but prevent broad interpretation of the findings.
Agenesis of the ductus venosus-A case with favorable outcome after early signs of cardiac failure.
Hofmann, Sigrun R; Heilmann, Antje; Häusler, Hans J; Kamin, Gabriele; Nitzsche, Katharina I
2013-01-01
Absence of the ductus venosus (ADV) is a rare vascular anomaly. Its prognosis depends on the pathway of the umbilical flow to the systemic venous circulation, and the presence or absence of associated structural or chromosomal anomalies, sometimes resulting in hydrops fetalis. In cases with isolated ADV in the absence of associated anomalies, survival rates are as high as 85%, depending on the shunt situation. Here, we report a patient with ADV and extrahepatic umbilical vein drainage with favorable outcome after intrauterine reversal of early signs of cardiac failure. Diagnosis was made after the appearance of moderate cardiomegaly in the 25th gestational week. Thus, in the case of cardiomegaly with or without further signs of cardiac failure, ultrasound imaging of the venous duct should be considered. Copyright © 2012 Wiley Periodicals, Inc.
Measurement and Analysis of Failures in Computer Systems
NASA Technical Reports Server (NTRS)
Thakur, Anshuman
1997-01-01
This thesis presents a study of software failures spanning several different releases of Tandem's NonStop-UX operating system running on Tandem Integrity S2(TMR) systems. NonStop-UX is based on UNIX System V and is fully compliant with industry standards, such as the X/Open Portability Guide, the IEEE POSIX standards, and the System V Interface Definition (SVID) extensions. In addition to providing a general UNIX interface to the hardware, the operating system has built-in recovery mechanisms and audit routines that check the consistency of the kernel data structures. The analysis is based on data on software failures and repairs collected from Tandem's product report (TPR) logs for a period exceeding three years. A TPR log is created when a customer or an internal developer observes a failure in a Tandem Integrity system. This study concentrates primarily on those TPRs that report a UNIX panic that subsequently crashes the system. Approximately 200 of the TPRs fall into this category. Approximately 50% of the failures reported are from field systems, and the rest are from the testing and development sites. It has been observed by Tandem developers that fewer cases are encountered from the field than from the test centers. Thus, the data selection mechanism has introduced a slight skew.
Zamri, Z; Razman, J
2012-11-01
Acute pancreatitis is one of the common reasons for surgical admission. It is a potentially lethal disease that is increasing in its incidence. The most common causes of acute pancreatitis is from gallstones and alcohol. Other causes of acute pancreatitis include hypertriglyceridaemia, hyperparathyroidism, pancreatic malignancy, Endoscopic retrograde cholangiopancreatography (ERCP), trauma, infectious agents, drugs, autoimmunity, and hereditary. The treatment of acute pancreatitis is mainly supportive. The complication of ERCP in acute pancreatitis can be divided into local complication (pancreatic abscess, pseudocyst), systemic complications (renal failure, respiratory failure, cardiogenic shock) and biliary sepsis (acute cholangitis and acute cholecystitis). However, early ERCP and possible sphincterotomy should be kept in mind for patients with severe disease and biliary obstruction who are not improving with medical therapy. This study is done to compare the complication rate of ERCP and conservative management in acute pancreatitis for past 6 years in Pusat Perubatan UKM. The study is conducted retrospectively and the study population was from January 2003 until December 2008. About 100 patients involving 51 males and 49 females were included in this study. All of them were diagnosed acute pancreatitis based on the serum amylase level of 4 times than normal value detected from Chemistry Pathology record, Pathology Department, PPUKM. Then, data were collected from the patient's file which include the demographic data and patient clinical presentation, ultrasound finding, either patient went for ERCP within 72 hours or not. If ERCP not done within 72 hours of admission then it will considered that the patient is under conservative management. From 100 patients that involved in this study about 44% was Malay, 36 % was Chinese, 18 % was Indian and the other 2 % was from other origin. There were 28 cases (28%) where ERCP was done within 72 hours, and the other 72 cases (72%) the treatment was conservative. Among 28 cases that ERCP was done within 72 hours after admission, 20 cases are mild where as only 8 cases are severe. However, in conservative group about 56 cases are mild and the other 16 are severe. Among the conservative group there are 12 cases which have complications. The complications are respiratory failure, renal failure, sepsis, shock and pancreatic necrosis. There are 7 cases whose have respiratory failure alone, 1 case developed renal failure and 1 case has a shock. 1 case developed both pancreatic necrosis with sepsis. 1 case each developed respiratory failure with sepsis and respiratory failure with renal failure. However no complications were noted in early ERCP group. As a conclusion in this study we found out that early ERCP have a significant role in acute pancreatitis compare to conservative management.
Raschi, Emanuel; Poluzzi, Elisabetta; Koci, Ariola; Caraceni, Paolo; Ponti, Fabrizio De
2014-01-01
AIM: To inform clinicians on the level of hepatotoxic risk among antimycotics in the post-marketing setting, following the marketing suspension of oral ketoconazole for drug-induced liver injury (DILI). METHODS: The publicly available international FAERS database (2004-2011) was used to extract DILI cases (including acute liver failure events), where antimycotics with systemic use or potential systemic absorption were reported as suspect or interacting agents. The reporting pattern was analyzed by calculating the reporting odds ratio and corresponding 95%CI, a measure of disproportionality, with time-trend analysis where appropriate. RESULTS: From 1687284 reports submitted over the 8-year period, 68115 regarded liver injury. Of these, 2.9% are related to antimycotics (1964 cases, of which 112 of acute liver failure). Eleven systemic antimycotics (including ketoconazole and the newer triazole derivatives voriconazole and posaconazole) and terbinafine (used systemically to treat onychomicosis) generated a significant disproportionality, indicating a post-marketing signal of risk. CONCLUSION: Virtually all antimycotics with systemic action or absorption are commonly reported in clinically significant cases of DILI. Clinicians must be aware of this aspect and monitor patients in case switch is considered, especially in critical poly-treated patients under chronic treatment. PMID:25232453
NASA Technical Reports Server (NTRS)
Eck, M.; Mukunda, M.
1988-01-01
Given here are predictions of fragment velocities and azimuths resulting from the Space Transportation System Solid Rocket Motor range destruct, or random failure occurring at any time during the 120 seconds of Solid Rocket Motor burn. Results obtained using the analytical methods described showed good agreement between predictions and observations for two specific events. It was shown that these methods have good potential for use in predicting the fragmentation process of a number of generically similar casing systems. It was concluded that coupled Eulerian-Lagrangian calculational methods of the type described here provide a powerful tool for predicting Solid Rocket Motor response.
Determination of UAV pre-flight Checklist for flight test purpose using qualitative failure analysis
NASA Astrophysics Data System (ADS)
Hendarko; Indriyanto, T.; Syardianto; Maulana, F. A.
2018-05-01
Safety aspects are of paramount importance in flight, especially in flight test phase. Before performing any flight tests of either manned or unmanned aircraft, one should include pre-flight checklists as a required safety document in the flight test plan. This paper reports on the development of a new approach for determination of pre-flight checklists for UAV flight test based on aircraft’s failure analysis. The Lapan’s LSA (Light Surveillance Aircraft) is used as a study case, assuming this aircraft has been transformed into the unmanned version. Failure analysis is performed on LSA using fault tree analysis (FTA) method. Analysis is focused on propulsion system and flight control system, which fail of these systems will lead to catastrophic events. Pre-flight checklist of the UAV is then constructed based on the basic causes obtained from failure analysis.
Derivation and experimental verification of clock synchronization theory
NASA Technical Reports Server (NTRS)
Palumbo, Daniel L.
1994-01-01
The objective of this work is to validate mathematically derived clock synchronization theories and their associated algorithms through experiment. Two theories are considered, the Interactive Convergence Clock Synchronization Algorithm and the Mid-Point Algorithm. Special clock circuitry was designed and built so that several operating conditions and failure modes (including malicious failures) could be tested. Both theories are shown to predict conservative upper bounds (i.e., measured values of clock skew were always less than the theory prediction). Insight gained during experimentation led to alternative derivations of the theories. These new theories accurately predict the clock system's behavior. It is found that a 100% penalty is paid to tolerate worst case failures. It is also shown that under optimal conditions (with minimum error and no failures) the clock skew can be as much as 3 clock ticks. Clock skew grows to 6 clock ticks when failures are present. Finally, it is concluded that one cannot rely solely on test procedures or theoretical analysis to predict worst case conditions. conditions.
Experimental validation of clock synchronization algorithms
NASA Technical Reports Server (NTRS)
Palumbo, Daniel L.; Graham, R. Lynn
1992-01-01
The objective of this work is to validate mathematically derived clock synchronization theories and their associated algorithms through experiment. Two theories are considered, the Interactive Convergence Clock Synchronization Algorithm and the Midpoint Algorithm. Special clock circuitry was designed and built so that several operating conditions and failure modes (including malicious failures) could be tested. Both theories are shown to predict conservative upper bounds (i.e., measured values of clock skew were always less than the theory prediction). Insight gained during experimentation led to alternative derivations of the theories. These new theories accurately predict the behavior of the clock system. It is found that a 100 percent penalty is paid to tolerate worst-case failures. It is also shown that under optimal conditions (with minimum error and no failures) the clock skew can be as much as three clock ticks. Clock skew grows to six clock ticks when failures are present. Finally, it is concluded that one cannot rely solely on test procedures or theoretical analysis to predict worst-case conditions.
2007-06-30
fractal dimensions and Lyapunov exponents . Fractal dimensions characterize geometri- cal complexity of dynamics (e.g., spatial distribution of points along...ant classi3ers (e.g., Lyapunov exponents , and fractal dimensions). The 3rst three steps show how chaotic systems may be separated from stochastic...correlated random walk in which a ¼ 2H, where H is the Hurst exponen interval 0pHp1 with the case H ¼ 0:5 corresponding to a simple rando This model has been
37 CFR 401.14 - Standard patent rights clauses.
Code of Federal Regulations, 2013 CFR
2013-07-01
... practice in the case of a process or method, or to operate in the case of a machine or system; and, in each... only request title within 60 days after learning of the failure of the contractor to disclose or elect...
37 CFR 401.14 - Standard patent rights clauses.
Code of Federal Regulations, 2014 CFR
2014-07-01
... practice in the case of a process or method, or to operate in the case of a machine or system; and, in each... only request title within 60 days after learning of the failure of the contractor to disclose or elect...
37 CFR 401.14 - Standard patent rights clauses.
Code of Federal Regulations, 2012 CFR
2012-07-01
... practice in the case of a process or method, or to operate in the case of a machine or system; and, in each... only request title within 60 days after learning of the failure of the contractor to disclose or elect...
Forward Skirt Structural Testing on the Space Launch System (SLS) Program
NASA Technical Reports Server (NTRS)
Lohrer, J. D.; Wright, R. D.
2016-01-01
Structural testing was performed to evaluate heritage forward skirts from the Space Shuttle program for use on the Space Launch System (SLS) program. One forward skirt is located in each solid rocket booster. Heritage forward skirts are aluminum 2219 welded structures. Loads are applied at the forward skirt thrust post and ball assembly. Testing was needed because SLS ascent loads are roughly 40% higher than Space Shuttle loads. Testing objectives were to determine margins of safety, demonstrate reliability, and validate analytical models. Two forward skirts were structurally tested using the test configuration. The test stand applied loads to the thrust post. Four hydraulic actuators were used to apply axial load and two hydraulic actuators were used to apply radial and tangential loads. The first test was referred to as FSTA-1 (Forward Skirt Structural Test Article) and was performed in April/May 2014. The purpose of FSTA-1 was to verify the ultimate capability of the forward skirt subjected to ascent ultimate loads. Testing consisted of two liftoff load cases taken to 100% limit load followed by an ascent load case taken to 110% limit load. The forward skirt was unloaded to no load after each test case. Lastly, the forward skirt was tested to 140% limit and then to failure using the ascent loads. The second test was referred to as FSTA-2 and performed in July/August of 2014. The purpose of FSTA-2 was to verify the ultimate capability of the forward skirt subjected to liftoff ultimate loads. Testing consisted of six liftoff load cases taken to 100% limit load followed by the six liftoff cases taken to 140% limit load. Two ascent load cases were then tested to 100% limit load. The forward skirt was unloaded to no load after each test case. Lastly, the forward skirt was tested to 140% limit and then to failure using the ascent loads. The forward skirts on FSTA-1 and FSTA-2 successfully carried all applied liftoff and ascent load cases. Both FSTA-1 and FSTA-2 were tested to failure by increasing the ascent loads. Failure occurred in the forward skirt thrust post radius. The forward skirts on FSTA-1 and FSTA-2 had nearly identical failure modes. FSTA-1 failed at 1.72 times limit load and FSTA-2 failed at 1.62 times limit load. This difference is primarily attributed to variation in material properties in the thrust post region. Test data were obtained from strain gages, deflection gages, ARAMIS digital strain measurement, acoustic emissions, and high-speed video. Strain gage data and ARAMIS strain were compared to finite element (FE) analysis predictions. Both the forward skirt and tooling were modeled. This allows the analysis to simulate the loading as close as possible to actual test configuration. FSTA-1 and FSTA-2 were instrumented with over 200 strain gages to ensure all possible failure modes could be captured. However, it turned out that three gages provided critical strain data. One was located in the post bore and two on the post radius. More gages were not specified due to space limitations and the desire to not interfere with the use of the ARAMIS system on the post radius. Measured strains were compared to analysis results for the load cycle to failure. Note that FSTA-1 gages were lost before failure was reached. FSTA-2 gages made it to the failure load but one of the radius gages was lost before testing began. This gage was not replaced because of the time and cost associated with disassembly of the test structure. Correlation to analysis was excellent for FSTA-1. FSTA-2 was not quite as good because there was more residual strain from previous load cycles. FSTA-2 was loaded and unloaded with 12 liftoff cases and two ascent cases before taking the skirt to failure. FSTA-1 only had two liftoff cases and one ascent case before taking the skirt to failure. The ARAMIS system was used to determine strain at the post radius by processing digital images of a speckled paint pattern. Digital cameras recorded images of the speckled paint pattern. ARAMIS strain results for FSTA-2 just prior to failure. Note a high strain location develops near the left side. This high strain compares well to analysis prediction for both FSTA-1 and FSTA-2. The strain at this location was also plotted versus limit load. Both FSTA-1 and FSTA-2 had excellent correlation between ARAMIS and analysis strains. Acoustic emission (AE) sensors were used to monitor for damage formation that may occur during testing (e.g., crack formation and growth or propagation). AE was very important because after disassembly of FSTA-1, a crack was observed in the ball fitting radius. The ball fitting did not crack on FSTA-2. AE data was used to reconstruct when the crack occurred. The AE energy versus time plot for FSTA. The energy increased considerably at 850 seconds (152% limit load), indicating a crack could have formed at this point. The only visual evidence found that could have corresponded to this was the crack that initiated in the ball fitting. The cracks in the forward skirt aluminum structures would likely have been lower energy due to a lower modulus and all that were found after failure correlated to occurring after the initial crack in the post radius. This was verified by high-speed cameras used to record the failure.
Reducing Cascading Failure Risk by Increasing Infrastructure Network Interdependence
DOE Office of Scientific and Technical Information (OSTI.GOV)
Korkali, Mert; Veneman, Jason G.; Tivnan, Brian F.
Increased coupling between critical infrastructure networks, such as power and communication systems, has important implications for the reliability and security of these systems. To understand the effects of power-communication coupling, several researchers have studied models of interdependent networks and reported that increased coupling can increase vulnerability. However, these conclusions come largely from models that have substantially different mechanisms of cascading failure, relative to those found in actual power and communication networks, and that do not capture the benefits of connecting systems with complementary capabilities. In order to understand the importance of these details, this paper compares network vulnerability in simplemore » topological models and in models that more accurately capture the dynamics of cascading in power systems. First, we compare a simple model of topological contagion to a model of cascading in power systems and find that the power grid model shows a higher level of vulnerability, relative to the contagion model. Second, we compare a percolation model of topological cascading in coupled networks to three different models of power networks coupled to communication systems. Again, the more accurate models suggest very different conclusions than the percolation model. In all but the most extreme case, the physics-based power grid models indicate that increased power-communication coupling decreases vulnerability. This is opposite from what one would conclude from the percolation model, in which zero coupling is optimal. Only in an extreme case, in which communication failures immediately cause grid failures, did we find that increased coupling can be harmful. Together, these results suggest design strategies for reducing the risk of cascades in interdependent infrastructure systems.« less
Reducing Cascading Failure Risk by Increasing Infrastructure Network Interdependence
Korkali, Mert; Veneman, Jason G.; Tivnan, Brian F.; ...
2017-03-20
Increased coupling between critical infrastructure networks, such as power and communication systems, has important implications for the reliability and security of these systems. To understand the effects of power-communication coupling, several researchers have studied models of interdependent networks and reported that increased coupling can increase vulnerability. However, these conclusions come largely from models that have substantially different mechanisms of cascading failure, relative to those found in actual power and communication networks, and that do not capture the benefits of connecting systems with complementary capabilities. In order to understand the importance of these details, this paper compares network vulnerability in simplemore » topological models and in models that more accurately capture the dynamics of cascading in power systems. First, we compare a simple model of topological contagion to a model of cascading in power systems and find that the power grid model shows a higher level of vulnerability, relative to the contagion model. Second, we compare a percolation model of topological cascading in coupled networks to three different models of power networks coupled to communication systems. Again, the more accurate models suggest very different conclusions than the percolation model. In all but the most extreme case, the physics-based power grid models indicate that increased power-communication coupling decreases vulnerability. This is opposite from what one would conclude from the percolation model, in which zero coupling is optimal. Only in an extreme case, in which communication failures immediately cause grid failures, did we find that increased coupling can be harmful. Together, these results suggest design strategies for reducing the risk of cascades in interdependent infrastructure systems.« less
Protection of the CERN Large Hadron Collider
NASA Astrophysics Data System (ADS)
Schmidt, R.; Assmann, R.; Carlier, E.; Dehning, B.; Denz, R.; Goddard, B.; Holzer, E. B.; Kain, V.; Puccio, B.; Todd, B.; Uythoven, J.; Wenninger, J.; Zerlauth, M.
2006-11-01
The Large Hadron Collider (LHC) at CERN will collide two counter-rotating proton beams, each with an energy of 7 TeV. The energy stored in the superconducting magnet system will exceed 10 GJ, and each beam has a stored energy of 362 MJ which could cause major damage to accelerator equipment in the case of uncontrolled beam loss. Safe operation of the LHC will therefore rely on a complex system for equipment protection. The systems for protection of the superconducting magnets in case of quench must be fully operational before powering the magnets. For safe injection of the 450 GeV beam into the LHC, beam absorbers must be in their correct positions and specific procedures must be applied. Requirements for safe operation throughout the cycle necessitate early detection of failures within the equipment, and active monitoring of the beam with fast and reliable beam instrumentation, mainly beam loss monitors (BLM). When operating with circulating beams, the time constant for beam loss after a failure extends from apms to a few minutes—failures must be detected sufficiently early and transmitted to the beam interlock system that triggers a beam dump. It is essential that the beams are properly extracted on to the dump blocks at the end of a fill and in case of emergency, since the beam dump blocks are the only elements of the LHC that can withstand the impact of the full beam.
NASA Astrophysics Data System (ADS)
Amirat, Yassine; Choqueuse, Vincent; Benbouzid, Mohamed
2013-12-01
Failure detection has always been a demanding task in the electrical machines community; it has become more challenging in wind energy conversion systems because sustainability and viability of wind farms are highly dependent on the reduction of the operational and maintenance costs. Indeed the most efficient way of reducing these costs would be to continuously monitor the condition of these systems. This allows for early detection of the generator health degeneration, facilitating a proactive response, minimizing downtime, and maximizing productivity. This paper provides then an assessment of a failure detection techniques based on the homopolar component of the generator stator current and attempts to highlight the use of the ensemble empirical mode decomposition as a tool for failure detection in wind turbine generators for stationary and non-stationary cases.
Risk management of key issues of FPSO
NASA Astrophysics Data System (ADS)
Sun, Liping; Sun, Hai
2012-12-01
Risk analysis of key systems have become a growing topic late of because of the development of offshore structures. Equipment failures of offloading system and fire accidents were analyzed based on the floating production, storage and offloading (FPSO) features. Fault tree analysis (FTA), and failure modes and effects analysis (FMEA) methods were examined based on information already researched on modules of relex reliability studio (RRS). Equipment failures were also analyzed qualitatively by establishing a fault tree and Boolean structure function based on the shortage of failure cases, statistical data, and risk control measures examined. Failure modes of fire accident were classified according to the different areas of fire occurrences during the FMEA process, using risk priority number (RPN) methods to evaluate their severity rank. The qualitative analysis of FTA gave the basic insight of forming the failure modes of FPSO offloading, and the fire FMEA gave the priorities and suggested processes. The research has practical importance for the security analysis problems of FPSO.
An adaptive actuator failure compensation scheme for two linked 2WD mobile robots
NASA Astrophysics Data System (ADS)
Ma, Yajie; Al-Dujaili, Ayad; Cocquempot, Vincent; El Badaoui El Najjar, Maan
2017-01-01
This paper develops a new adaptive compensation control scheme for two linked mobile robots with actuator failurs. A configuration with two linked two-wheel drive (2WD) mobile robots is proposed, and the modelling of its kinematics and dynamics are given. An adaptive failure compensation scheme is developed to compensate actuator failures, consisting of a kinematic controller and a multi-design integration based dynamic controller. The kinematic controller is a virtual one, and based on which, multiple adaptive dynamic control signals are designed which covers all possible failure cases. By combing these dynamic control signals, the dynamic controller is designed, which ensures system stability and asymptotic tracking properties. Simulation results verify the effectiveness of the proposed adaptive failure compensation scheme.
NASA Technical Reports Server (NTRS)
Runkle, R.; Henson, K.
1982-01-01
A failure analysis of the parachute on the Space Transportation System 3 flight's solid rocket booster's is presented. During the reentry phase of the two Solid Rocket Boosters (SRBs), one 115 ft diameter main parachute failed on the right hand SRB (A12). This parachute failure caused the SRB to impact the Ocean at 110 ft/sec in lieu of the expected 3 parachute impact velocity of 88 ft/sec. This higher impact velocity relates directly to more SRB aft skirt and more motor case damage. The cause of the parachute failure, the potential risks of losing an SRB as a result of this failure, and recommendations to ensure that the probability of chute failures of this type in the future will be low are discussed.
Application of Improved Genetic Algorithm to Service Restoration Problem for Distribution Systems
NASA Astrophysics Data System (ADS)
Michibata, Ikuo; Aoki, Hidenori
The problem of recovery from power-system failures is the problem of handling operations that make it possible to supply power from other lines in response to power-system failures or construction by switching between the opened and closed states of sectionalizing switches. Considerable research has already been conducted with regard to this issue. This paper addresses the issue of determining target systems for final recovery in cases when some sections remain subject to power failure (i.e., sound bank capacity < load capacity). For this purpose, intersection is conducted only for parameters within such power-failure sections. In such research, calculations are implemented by setting a value of 2 to the sectionalizing switches of a single parameter. In addition, when the state of a sound section changes due to mutation improvements, the method of simultaneously changing the selected points and neighboring sectionalizing switches is applied. It is clear that the proposed method, consisting of conventional GA only, is superior in terms of average fitness values.
NASA Technical Reports Server (NTRS)
Burken, John J.; Hanson, Curtis E.; Lee, James A.; Kaneshige, John T.
2009-01-01
This report describes the improvements and enhancements to a neural network based approach for directly adapting to aerodynamic changes resulting from damage or failures. This research is a follow-on effort to flight tests performed on the NASA F-15 aircraft as part of the Intelligent Flight Control System research effort. Previous flight test results demonstrated the potential for performance improvement under destabilizing damage conditions. Little or no improvement was provided under simulated control surface failures, however, and the adaptive system was prone to pilot-induced oscillations. An improved controller was designed to reduce the occurrence of pilot-induced oscillations and increase robustness to failures in general. This report presents an analysis of the neural networks used in the previous flight test, the improved adaptive controller, and the baseline case with no adaptation. Flight test results demonstrate significant improvement in performance by using the new adaptive controller compared with the previous adaptive system and the baseline system for control surface failures.
Design of analytical failure detection using secondary observers
NASA Technical Reports Server (NTRS)
Sisar, M.
1982-01-01
The problem of designing analytical failure-detection systems (FDS) for sensors and actuators, using observers, is addressed. The use of observers in FDS is related to the examination of the n-dimensional observer error vector which carries the necessary information on possible failures. The problem is that in practical systems, in which only some of the components of the state vector are measured, one has access only to the m-dimensional observer-output error vector, with m or = to n. In order to cope with these cases, a secondary observer is synthesized to reconstruct the entire observer-error vector from the observer output error vector. This approach leads toward the design of highly sensitive and reliable FDS, with the possibility of obtaining a unique fingerprint for every possible failure. In order to keep the observer's (or Kalman filter) false-alarm rate under a certain specified value, it is necessary to have an acceptable matching between the observer (or Kalman filter) models and the system parameters. A previously developed adaptive observer algorithm is used to maintain the desired system-observer model matching, despite initial mismatching or system parameter variations. Conditions for convergence for the adaptive process are obtained, leading to a simple adaptive law (algorithm) with the possibility of an a priori choice of fixed adaptive gains. Simulation results show good tracking performance with small observer output errors, while accurate and fast parameter identification, in both deterministic and stochastic cases, is obtained.
Acquired perforating dermatosis: a report of 8 cases.
González-Lara, L; Gómez-Bernal, S; Vázquez-López, F; Vivanco-Allende, B
2014-01-01
Acquired perforating dermatosis (APD) is an uncommon disease characterized by lesions exhibiting transepidermal elimination of collagen or elastic fibers. APD affects adults and is associated with systemic diseases, mainly diabetes mellitus and renal failure. We present 8 cases of APD. Seven patients had concomitant diabetes mellitus with or without chronic renal failure, and 1 had alcoholic cirrhosis. In the patients with chronic renal failure, the onset of APD coincided with transient worsening of renal function. The mean increase in creatinine concentrations above baseline was 1.14mg/dL. Acute deterioration of renal function may be involved in APD. Further studies are needed to investigate this association. Copyright © 2013 Elsevier España, S.L. y AEDV. All rights reserved.
NASA Technical Reports Server (NTRS)
Tung, P. P. (Editor); Agrawal, S. P.; Kumar, A.; Katcher, M.
1981-01-01
Papers are presented on the application of fracture mechanics to spacecraft design, fracture control applications on the Space Shuttle reaction control thrusters, and an assessment of fatigue crack growth rate relationships for metallic airframe materials. Also considered are fracture mechanisms and microstructural relationships in Ni-base alloy systems, the use of surface deformation markings to determine crack propagation directions, case histories of metallurgical failures in the electronics industry, and a failure analysis of silica phenolic nozzle liners.
NASA Astrophysics Data System (ADS)
Watanabe, Shunsuke; Kabashima, Yoshiyuki
2016-09-01
In this study we investigate the resilience of duplex networked layers α and β coupled with antagonistic interlinks, each layer of which inhibits its counterpart at the microscopic level, changing the following factors: whether the influence of the initial failures in α remains [quenched (case Q )] or not [free (case F )]; the effect of intralayer degree-degree correlations in each layer and interlayer degree-degree correlations; and the type of the initial failures, such as random failures or targeted attacks (TAs). We illustrate that the percolation processes repeat in both cases Q and F , although only in case F are nodes that initially failed reactivated. To analytically evaluate the resilience of each layer, we develop a methodology based on the cavity method for deriving the size of a giant component (GC). Strong hysteresis, which is ignored in the standard cavity analysis, is observed in the repetition of the percolation processes particularly in case F . To handle this, we heuristically modify interlayer messages for macroscopic analysis, the utility of which is verified by numerical experiments. The percolation transition in each layer is continuous in both cases Q and F . We also analyze the influences of degree-degree correlations on the robustness of layer α , in particular for the case of TAs. The analysis indicates that the critical fraction of initial failures that makes the GC size in layer α vanish depends only on its intralayer degree-degree correlations. Although our model is defined in a somewhat abstract manner, it may have relevance to ecological systems that are composed of endangered species (layer α ) and invaders (layer β ), the former of which are damaged by the latter whereas the latter are exterminated in the areas where the former are active.
Rhabdomyolysis during envenomation by Physalia sp envenomation in New Caldonia.
Maldonado, E; Maillaud, C; Barguil, Y; Labadie, M
2017-02-01
We report the first case of rhabdomyolysis following envenomation by a Physalia sp in New Caledonia. Systemic envenomation by this marine hydrozoan is well known, including myalgia as a commonly reported clinical feature. Nonetheless, a related increase in muscle enzymes, featuring rhabdomyolysis, has not previously been described. In this case report, we describe a patient with rhabdomyolysis and acute renal failure. Rhabdomyolysis should be checked in case of systemic physalia envenomation.
Repair of long-bone fractures in cats and small dogs with the Unilock mandible locking plate system.
Voss, K; Kull, M; Hässig, M; Montavon, P
2009-01-01
To retrospectively evaluate stabilisation of long-bone fractures in cats and small dogs using the Unilock system. Medical histories and radiographs of consecutive patients with long-bone fractures stabilised with the Unilock system were reviewed. Cases with follow-up radiographs taken at least four weeks postoperatively were included. Signalment of the patient, fracture localisation and type, primary fracture repair or revision surgery, single or double plating, and complications for each patient were noted. Additionally, implant size, number of screws, number of cortices engaged with screws, and number of empty holes across the fracture were evaluated in fractures where a single plate had been applied. Eighteen humeral, 18 radial, 20 femoral, and 10 tibial fractures were treated. The Unilock system was used for primary repair in 44 fractures and for revision surgery in 22 fractures. Two plates were applied in 17 fractures, and a single plate was applied in 49 fractures. Follow-up radiographs were taken four to 109 weeks postoperatively. Complications were seen in 12 animals and 13 fractures (19.7%). Fixation failure occurred in seven fractures (10.6%). Cases with a single plate that suffered fixation failure had thinner screws in relation to bone diameter than cases with double plates, and more screws in a main fragment than those without fixation failure. The Unilock system is a suitable implant for fracture fixation of long bones in cats and small dogs.
Implant failure and history of failed endodontic treatment: A retrospective case-control study.
Chatzopoulos, Georgios S; Wolff, Larry F
2017-11-01
Residual bacterial biofilm and/or bacteria in planktonic form may be survived in the bone following an extraction of an infected tooth that was endodontically treated unsuccessfully Failed endodontic treatment may be associated with failure of implants to osseointegrate in the same sites. Therefore, the aim of this retrospective case-control study is to examine the risk of implant failure in previous failed endodontic sites. This retrospective case-control study is based on 94 dental records of implants placed at the University of Minnesota School of Dentistry. Dental records of patients who received an implant in sites with previously failed endodontic therapy in the dental school were identified from the electronic database, while control subjects were obtained from the same pool of patients with the requirement to have received an implant in a site that was not endodontically treated. The mean age of the population was 62.89±14.17 years with 57.4% of the sample being females and 42.6% of them being males. In regards to the socio-economic status and dental insurance, 84.0% of this population was classified as low socio-economic status and 68.1% had dental insurance. Tobacco use was self-reported by 9.6% and hypercholesterolemia was the most prevalent systemic medical condition. Dental implant failure was identified in two of the included records (2.1%), both of which were placed in sites with a history of failed endodontic treatment. Within the limitations of this retrospective case-control study, further investigation with a larger population group into implant failure of sites that previously had unsuccessful endodontic treatment would be warranted. Implant failure may be associated with a history of failed endodontic treatment. Key words: Implantology, endodontics, osseointegration, treatment outcome, case-control study.
Reducing Cascading Failure Risk by Increasing Infrastructure Network Interdependence.
Korkali, Mert; Veneman, Jason G; Tivnan, Brian F; Bagrow, James P; Hines, Paul D H
2017-03-20
Increased interconnection between critical infrastructure networks, such as electric power and communications systems, has important implications for infrastructure reliability and security. Others have shown that increased coupling between networks that are vulnerable to internetwork cascading failures can increase vulnerability. However, the mechanisms of cascading in these models differ from those in real systems and such models disregard new functions enabled by coupling, such as intelligent control during a cascade. This paper compares the robustness of simple topological network models to models that more accurately reflect the dynamics of cascading in a particular case of coupled infrastructures. First, we compare a topological contagion model to a power grid model. Second, we compare a percolation model of internetwork cascading to three models of interdependent power-communication systems. In both comparisons, the more detailed models suggest substantially different conclusions, relative to the simpler topological models. In all but the most extreme case, our model of a "smart" power network coupled to a communication system suggests that increased power-communication coupling decreases vulnerability, in contrast to the percolation model. Together, these results suggest that robustness can be enhanced by interconnecting networks with complementary capabilities if modes of internetwork failure propagation are constrained.
Reducing Cascading Failure Risk by Increasing Infrastructure Network Interdependence
NASA Astrophysics Data System (ADS)
Korkali, Mert; Veneman, Jason G.; Tivnan, Brian F.; Bagrow, James P.; Hines, Paul D. H.
2017-03-01
Increased interconnection between critical infrastructure networks, such as electric power and communications systems, has important implications for infrastructure reliability and security. Others have shown that increased coupling between networks that are vulnerable to internetwork cascading failures can increase vulnerability. However, the mechanisms of cascading in these models differ from those in real systems and such models disregard new functions enabled by coupling, such as intelligent control during a cascade. This paper compares the robustness of simple topological network models to models that more accurately reflect the dynamics of cascading in a particular case of coupled infrastructures. First, we compare a topological contagion model to a power grid model. Second, we compare a percolation model of internetwork cascading to three models of interdependent power-communication systems. In both comparisons, the more detailed models suggest substantially different conclusions, relative to the simpler topological models. In all but the most extreme case, our model of a “smart” power network coupled to a communication system suggests that increased power-communication coupling decreases vulnerability, in contrast to the percolation model. Together, these results suggest that robustness can be enhanced by interconnecting networks with complementary capabilities if modes of internetwork failure propagation are constrained.
Reducing Cascading Failure Risk by Increasing Infrastructure Network Interdependence
Korkali, Mert; Veneman, Jason G.; Tivnan, Brian F.; Bagrow, James P.; Hines, Paul D. H.
2017-01-01
Increased interconnection between critical infrastructure networks, such as electric power and communications systems, has important implications for infrastructure reliability and security. Others have shown that increased coupling between networks that are vulnerable to internetwork cascading failures can increase vulnerability. However, the mechanisms of cascading in these models differ from those in real systems and such models disregard new functions enabled by coupling, such as intelligent control during a cascade. This paper compares the robustness of simple topological network models to models that more accurately reflect the dynamics of cascading in a particular case of coupled infrastructures. First, we compare a topological contagion model to a power grid model. Second, we compare a percolation model of internetwork cascading to three models of interdependent power-communication systems. In both comparisons, the more detailed models suggest substantially different conclusions, relative to the simpler topological models. In all but the most extreme case, our model of a “smart” power network coupled to a communication system suggests that increased power-communication coupling decreases vulnerability, in contrast to the percolation model. Together, these results suggest that robustness can be enhanced by interconnecting networks with complementary capabilities if modes of internetwork failure propagation are constrained. PMID:28317835
45 CFR 650.4 - Standard patent rights clause.
Code of Federal Regulations, 2010 CFR
2010-10-01
... practice in the case of a process or method, or to operate in the case of a machine or system; and, in each... request title within 60 days after learning of the failure of the grantee to disclose or elect within the...
48 CFR 952.227-11 - Patent rights-retention by the contractor (short form).
Code of Federal Regulations, 2011 CFR
2011-10-01
... process or method; or to operate, in the case of a machine or system; and, in each case, under such... 60 days after learning of the failure of the Contractor to disclose or elect within the specified...
14 CFR 1274.913 - Patent rights-retention by the recipient (small business).
Code of Federal Regulations, 2012 CFR
2012-01-01
... process or method, or to operate, in the case of a machine or system; and, in each case, under such... within 60 days after learning of the failure of the Recipient to disclose or elect within the specified...
14 CFR § 1274.913 - Patent rights-retention by the recipient (small business).
Code of Federal Regulations, 2014 CFR
2014-01-01
... process or method, or to operate, in the case of a machine or system; and, in each case, under such... within 60 days after learning of the failure of the Recipient to disclose or elect within the specified...
48 CFR 952.227-11 - Patent rights-retention by the contractor (short form).
Code of Federal Regulations, 2013 CFR
2013-10-01
... process or method; or to operate, in the case of a machine or system; and, in each case, under such... 60 days after learning of the failure of the Contractor to disclose or elect within the specified...
14 CFR 1274.913 - Patent rights-retention by the recipient (small business).
Code of Federal Regulations, 2013 CFR
2013-01-01
... process or method, or to operate, in the case of a machine or system; and, in each case, under such... within 60 days after learning of the failure of the Recipient to disclose or elect within the specified...
48 CFR 952.227-11 - Patent rights-retention by the contractor (short form).
Code of Federal Regulations, 2014 CFR
2014-10-01
... process or method; or to operate, in the case of a machine or system; and, in each case, under such... 60 days after learning of the failure of the Contractor to disclose or elect within the specified...
48 CFR 952.227-11 - Patent rights-retention by the contractor (short form).
Code of Federal Regulations, 2012 CFR
2012-10-01
... process or method; or to operate, in the case of a machine or system; and, in each case, under such... 60 days after learning of the failure of the Contractor to disclose or elect within the specified...
Availability Simulation of AGT Systems
DOT National Transportation Integrated Search
1975-02-01
The report discusses the analytical and simulation procedures that were used to evaluate the effects of failure in a complex dual mode transportation system based on a worst case study-state condition. The computed results are an availability figure ...
Ducatman, Barbara S.; Williams, H. James; Hobbs, Gerald; Gyure, Kymberly A.
2009-01-01
Objectives To determine whether a longitudinal, case-based evaluation system can predict acquisition of competency in surgical pathology and how trainees at risk can be identified early. Design Data were collected for trainee performance on surgical pathology cases (how well their diagnosis agreed with the faculty diagnosis) and compared with training outcomes. Negative training outcomes included failure to complete the residency, failure to pass the anatomic pathology component of the American Board of Pathology examination, and/or failure to obtain or hold a position immediately following training. Findings Thirty-three trainees recorded diagnoses for 54 326 surgical pathology cases, with outcome data available for 15 residents. Mean case-based performance was significantly higher for those with positive outcomes, and outcome status could be predicted as early as postgraduate year-1 (P = .0001). Performance on the first postgraduate year-1 rotation was significantly associated with the outcome (P = .02). Although trainees with unsuccessful outcomes improved their performance more rapidly, they started below residents with successful outcomes and did not make up the difference during training. There was no significant difference in Step 1 or 2 United States Medical Licensing Examination (USMLE) scores when compared with performance or final outcomes (P = .43 and P = .68, respectively) and the resident in-service examination (RISE) had limited predictive ability. Discussion Differences between successful- and unsuccessful-outcome residents were most evident in early residency, ideal for designing interventions or counseling residents to consider another specialty. Conclusion Our longitudinal case-based system successfully identified trainees at risk for failure to acquire critical competencies for surgical pathology early in the program. PMID:21975705
SU-E-T-117: Analysis of the ArcCHECK Dosimetry Gamma Failure Using the 3DVH System
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cho, S; Choi, W; Lee, H
2015-06-15
Purpose: To evaluate gamma analysis failure for the VMAT patient specific QA using ArcCHECK cylindrical phantom. The 3DVH system(Sun Nuclear, FL) was used to analyze the dose difference statistic between measured dose and treatment planning system calculated dose. Methods: Four case of gamma analysis failure were selected retrospectively. Our institution gamma analysis indexes were absolute dose, 3%/3mm and 90%pass rate in the ArcCHECK dosimetry. The collapsed cone convolution superposition (CCCS) dose calculation algorithm for VMAT was used. Dose delivery was performed with Elekta Agility. The A1SL(standard imaging, WI) and cavity plug were used for point dose measurement. Delivery QA plansmore » and images were used for 3DVH Reference data instead of patient plan and image. The measured data of ‘.txt’ file was used for comparison at diodes to acquire a global dose level. The,.acml’ file was used for AC-PDP and to calculated point dose. Results: The global dose of 3DVH was calculated as 1.10 Gy, 1.13, 1.01 and 0.2 Gy respectively. The global dose of 0.2 Gy case was induced by distance discrepancy. The TPS calculated point dose of was 2.33 Gy to 2.77 Gy and 3DVH calculated dose was 2.33 Gy to 2.68 Gy. The maximum dose differences were −2.83% and −3.1% for TPS vs. measured dose and TPS vs. 3DVH calculated respectively in the same case. The difference between measured and 3DVH was 0.1% in that case. The 3DVH gamma pass rate was 98% to 99.7%. Conclusion: We found the TPS calculation error by 3DVH calculation using ArcCHECK measured dose. It seemed that our CCCS algorithm RTP system over estimated at the central region and underestimated scattering at the peripheral diode detector point. The relative gamma analysis and point dose measurement would be recommended for VMAT DQA in the gamma failure case of ArcCHECK dosimetry.« less
Adaptive Control in the Presence of Simultaneous Sensor Bias and Actuator Failures
NASA Technical Reports Server (NTRS)
Joshi, Suresh M.
2012-01-01
The problem of simultaneously accommodating unknown sensor biases and unknown actuator failures in uncertain systems is considered in a direct model reference adaptive control (MRAC) setting for state tracking using state feedback. Sensor biases and actuator faults may be present at the outset or may occur at unknown instants of time during operation. A modified MRAC law is proposed, which combines sensor bias estimation with control gain adaptation for accommodation of sensor biases and actuator failures. This control law is shown to provide signal boundedness in the resulting system. For the case when an external asymptotically stable sensor bias estimator is available, an MRAC law is developed to accomplish asymptotic state tracking and signal boundedness. For a special case wherein biases are only present in the rate measurements and bias-free position measurements are available, an MRAC law is developed using a model-independent bias estimator, and is shown to provide asymptotic state tracking with signal boundedness.
CABINS: Case-based interactive scheduler
NASA Technical Reports Server (NTRS)
Miyashita, Kazuo; Sycara, Katia
1992-01-01
In this paper we discuss the need for interactive factory schedule repair and improvement, and we identify case-based reasoning (CBR) as an appropriate methodology. Case-based reasoning is the problem solving paradigm that relies on a memory for past problem solving experiences (cases) to guide current problem solving. Cases similar to the current case are retrieved from the case memory, and similarities and differences of the current case to past cases are identified. Then a best case is selected, and its repair plan is adapted to fit the current problem description. If a repair solution fails, an explanation for the failure is stored along with the case in memory, so that the user can avoid repeating similar failures in the future. So far we have identified a number of repair strategies and tactics for factory scheduling and have implemented a part of our approach in a prototype system, called CABINS. As a future work, we are going to scale up CABINS to evaluate its usefulness in a real manufacturing environment.
Understanding and managing the effects of battery charger and inverter aging
NASA Astrophysics Data System (ADS)
Gunther, W.; Aggarwal, S.
An aging assessment of battery chargers and inverters was conducted under the auspices of the NRC's Nuclear Plant Aging Research (NPAR) Program. The intentions of this program are to resolve issues related to the aging and service wear of equipment and systems at operating reactor facilities and to assess their impact on safety. Inverters and battery chargers are used in nuclear power plants to perform significant functions related to plant safety and availability. The specific impact of a battery charger or inverter failure varies with plant configuration. Operating experience data have demonstrated that reactor trips, safety injection system actuations, and inoperable emergency core cooling systems have resulted from inverter failures; and dc bus degradation leading to diesel generator inoperability or loss of control room annunication and indication have resulted from battery and battery charger failures. For the battery charger and inverter, the aging and service wear of subcomponents have contributed significantly to equipment failures. This paper summarizes the data and then describes methods that can be used to detect battery charger and inverter degradation prior to failure, as well as methods to minimize the failure effects. In both cases, the managing of battery charger and inverter aging is emphasized.
ERIC Educational Resources Information Center
Cannon, Jennifer A. N.; Warren, Jared S.; Nelson, Philip L.; Burlingame, Gary M.
2010-01-01
This study used longitudinal youth outcome data in routine mental health services to test a system for identifying cases at risk for treatment failure. Participants were 2,715 youth (M age = 14) served in outpatient managed care and community mental health settings. Change trajectories were developed using multilevel modeling of archival data.…
Causes of failure with Szabo technique - an analysis of nine cases.
Jain, Rajendra Kumar; Padmanabhan, T N C; Chitnis, Nishad
2013-01-01
The objective of this case series is to identify and define causes of failure of Szabo technique in rapid-exchange monorail system for ostial lesions. From March 2009 to March 2011, 42 patients with an ostial lesion were treated percutaneously at our institution using Szabo technique in a monorail stent system. All patients received unfractionated heparin during intervention. Loading dose of clopidogrel, followed by clopidogrel and aspirin was administered. In 57% of patients, drug-eluting stents were used and in 42.8% patients bare metal stents. The stent was advanced over both wires, the target wire and the anchor wire. The anchor wire, which was passed through the proximal trailing strut of the stent helps to achieve precise stenting. The procedure was considered to be successful if stent was placed precisely covering the lesion and without stent loss or anchor wire prolapsing. Of the total 42 patients, the procedure was successful in 33, while failed in 9. Majority of failures were due to wire entanglement, which was fixed successfully in 3 cases by removing and reinserting the anchor wire. Out of other three failures, in one stent dislodgment occurred, stent could not cross the lesion in one and in another anchor wire got looped and prolapsed into target vessel. This case series shows that the Szabo technique, in spite of some difficulties like wire entanglement, stent dislodgement and resistance during stent advancement, is a simple and feasible method for treating variety of ostial lesions precisely compared to conventional angioplasty. Copyright © 2013 Cardiological Society of India. Published by Elsevier B.V. All rights reserved.
Causes of failure with Szabo technique – An analysis of nine cases
Jain, Rajendra Kumar; Padmanabhan, T.N.C.; Chitnis, Nishad
2013-01-01
Objective The objective of this case series is to identify and define causes of failure of Szabo technique in rapid-exchange monorail system for ostial lesions. Methods and results From March 2009 to March 2011, 42 patients with an ostial lesion were treated percutaneously at our institution using Szabo technique in a monorail stent system. All patients received unfractionated heparin during intervention. Loading dose of clopidogrel, followed by clopidogrel and aspirin was administered. In 57% of patients, drug-eluting stents were used and in 42.8% patients bare metal stents. The stent was advanced over both wires, the target wire and the anchor wire. The anchor wire, which was passed through the proximal trailing strut of the stent helps to achieve precise stenting. The procedure was considered to be successful if stent was placed precisely covering the lesion and without stent loss or anchor wire prolapsing. Of the total 42 patients, the procedure was successful in 33, while failed in 9. Majority of failures were due to wire entanglement, which was fixed successfully in 3 cases by removing and reinserting the anchor wire. Out of other three failures, in one stent dislodgment occurred, stent could not cross the lesion in one and in another anchor wire got looped and prolapsed into target vessel. Conclusion This case series shows that the Szabo technique, in spite of some difficulties like wire entanglement, stent dislodgement and resistance during stent advancement, is a simple and feasible method for treating variety of ostial lesions precisely compared to conventional angioplasty. PMID:23809379
Malfunction and failure of robotic systems during general surgical procedures.
Agcaoglu, Orhan; Aliyev, Shamil; Taskin, Halit Eren; Chalikonda, Sricharan; Walsh, Matthew; Costedio, Meagan M; Kroh, Matthew; Rogula, Tomasz; Chand, Bipan; Gorgun, Emre; Siperstein, Allan; Berber, Eren
2012-12-01
There has been recent interest in using robots for general surgical procedures. This shift in technique raises the issue of patient safety with automated instrumentation. Although the safety of robotics has been established for urologic procedures, there are scant data on its use in general surgical procedures. The aim of this study is to analyze the incidence of robotic malfunction and its consequences for general surgical procedures. All robotic general surgical procedures performed at a tertiary center between 2008 and 2011 were reviewed from institutional review board (IRB)-approved prospective databases. A total of 223 cases were done robotically, including 102 endocrine, 83 hepatopancreaticobiliary, 17 upper gastrointestinal, and 21 lower gastrointestinal colorectal procedures. There were 10 cases of robotic malfunction (4.5%). These failures were related to robotic instruments (n = 4), optical system (n = 3), robotic arms (n = 2), and robotic console (n = 1). None of these failures led to adverse patient consequences or conversion to open. Six (2.7%) cases were converted to open due to bleeding (n = 3), difficult dissection plane (n = 1), invasion of tumor to surrounding structures (n = 1), and intolerance of pneumoperitoneum due to CO(2) retention (n = 1). There was no mortality, and morbidity was 1% (n = 2). To our knowledge, this is the largest North American report to date on robotic general surgical procedures. Our results show that robotic malfunction occurs in a minority of cases, with no adverse consequences. We believe that awareness of these failures and knowing how to troubleshoot are important to maintain the efficiency of these procedures.
NASA Technical Reports Server (NTRS)
Herrin, Stephanie; Iverson, David; Spukovska, Lilly; Souza, Kenneth A. (Technical Monitor)
1994-01-01
Failure Modes and Effects Analysis contain a wealth of information that can be used to create the knowledge base required for building automated diagnostic Expert systems. A real time monitoring and diagnosis expert system based on an actual NASA project's matrix failure modes and effects analysis was developed. This Expert system Was developed at NASA Ames Research Center. This system was first used as a case study to monitor the Research Animal Holding Facility (RAHF), a Space Shuttle payload that is used to house and monitor animals in orbit so the effects of space flight and microgravity can be studied. The techniques developed for the RAHF monitoring and diagnosis Expert system are general enough to be used for monitoring and diagnosis of a variety of other systems that undergo a Matrix FMEA. This automated diagnosis system was successfully used on-line and validated on the Space Shuttle flight STS-58, mission SLS-2 in October 1993.
Bone marrow failure in childhood: central pathology review of a nationwide registry.
Ito, Masafumi
2017-01-01
Refractory cytopenia of childhood (RCC) was proposed as a provisional entity in the 2008 WHO classification of myelodysplastic syndromes (MDS). It is defined as a childhood MDS featuring persistent cytopenia without increase blasts in bone marrow (BM) or peripheral blood (PB). Because the majority of RCC cases feature hypocellularity and pancytopenia, it is quite challenging to differentiate RCC from acquired aplastic anemia (AA) and many kinds of inherited bone marrow failure syndromes (IBMFS). Diagnosis of RCC requires BM histology of characteristic features such as isolated erythroid islet with left shift, abnormal localization and micromegakaryocytes. The Japanese Society of Pediatric Hematology/Oncology has opened the central registry review system since 2009 to evaluate childhood cases of bone marrow failure (BMF). It has reviewed cytology and BM pathology of all registered BMF cases, which number more than 1,700. In the evaluation of BMF, BM pathology is important to assess the mechanism of hematopoiesis. Pathological dysplasia should be differentiated from cytological dysplasia. A central review system is important for rare diseases, such as pediatric BMF. Standardization of pathological diagnosis should be established upon consensus findings, descriptions, and diagnostic approaches. In this review, the pathology of pediatric BMF syndromes is summarized.
Integrating FMEA in a Model-Driven Methodology
NASA Astrophysics Data System (ADS)
Scippacercola, Fabio; Pietrantuono, Roberto; Russo, Stefano; Esper, Alexandre; Silva, Nuno
2016-08-01
Failure Mode and Effects Analysis (FMEA) is a well known technique for evaluating the effects of potential failures of components of a system. FMEA demands for engineering methods and tools able to support the time- consuming tasks of the analyst. We propose to make FMEA part of the design of a critical system, by integration into a model-driven methodology. We show how to conduct the analysis of failure modes, propagation and effects from SysML design models, by means of custom diagrams, which we name FMEA Diagrams. They offer an additional view of the system, tailored to FMEA goals. The enriched model can then be exploited to automatically generate FMEA worksheet and to conduct qualitative and quantitative analyses. We present a case study from a real-world project.
A unified method for evaluating real-time computer controllers: A case study. [aircraft control
NASA Technical Reports Server (NTRS)
Shin, K. G.; Krishna, C. M.; Lee, Y. H.
1982-01-01
A real time control system consists of a synergistic pair, that is, a controlled process and a controller computer. Performance measures for real time controller computers are defined on the basis of the nature of this synergistic pair. A case study of a typical critical controlled process is presented in the context of new performance measures that express the performance of both controlled processes and real time controllers (taken as a unit) on the basis of a single variable: controller response time. Controller response time is a function of current system state, system failure rate, electrical and/or magnetic interference, etc., and is therefore a random variable. Control overhead is expressed as a monotonically nondecreasing function of the response time and the system suffers catastrophic failure, or dynamic failure, if the response time for a control task exceeds the corresponding system hard deadline, if any. A rigorous probabilistic approach is used to estimate the performance measures. The controlled process chosen for study is an aircraft in the final stages of descent, just prior to landing. First, the performance measures for the controller are presented. Secondly, control algorithms for solving the landing problem are discussed and finally the impact of the performance measures on the problem is analyzed.
Availability Analysis of Dual Mode Systems
DOT National Transportation Integrated Search
1974-04-01
The analytical procedures presented define a method of evaluating the effects of failures in a complex dual-mode system based on a worst case steady-state analysis. The computed result is an availability figure of merit and not an absolute prediction...
Predicting remaining life by fusing the physics of failure modeling with diagnostics
NASA Astrophysics Data System (ADS)
Kacprzynski, G. J.; Sarlashkar, A.; Roemer, M. J.; Hess, A.; Hardman, B.
2004-03-01
Technology that enables failure prediction of critical machine components (prognostics) has the potential to significantly reduce maintenance costs and increase availability and safety. This article summarizes a research effort funded through the U.S. Defense Advanced Research Projects Agency and Naval Air System Command aimed at enhancing prognostic accuracy through more advanced physics-of-failure modeling and intelligent utilization of relevant diagnostic information. H-60 helicopter gear is used as a case study to introduce both stochastic sub-zone crack initiation and three-dimensional fracture mechanics lifing models along with adaptive model updating techniques for tuning key failure mode variables at a local material/damage site based on fused vibration features. The overall prognostic scheme is aimed at minimizing inherent modeling and operational uncertainties via sensed system measurements that evolve as damage progresses.
Wang, Yue; Luo, Jin; Hao, Shiying; Xu, Haihua; Shin, Andrew Young; Jin, Bo; Liu, Rui; Deng, Xiaohong; Wang, Lijuan; Zheng, Le; Zhao, Yifan; Zhu, Chunqing; Hu, Zhongkai; Fu, Changlin; Hao, Yanpeng; Zhao, Yingzhen; Jiang, Yunliang; Dai, Dorothy; Culver, Devore S; Alfreds, Shaun T; Todd, Rogow; Stearns, Frank; Sylvester, Karl G; Widen, Eric; Ling, Xuefeng B
2015-12-01
In order to proactively manage congestive heart failure (CHF) patients, an effective CHF case finding algorithm is required to process both structured and unstructured electronic medical records (EMR) to allow complementary and cost-efficient identification of CHF patients. We set to identify CHF cases from both EMR codified and natural language processing (NLP) found cases. Using narrative clinical notes from all Maine Health Information Exchange (HIE) patients, the NLP case finding algorithm was retrospectively (July 1, 2012-June 30, 2013) developed with a random subset of HIE associated facilities, and blind-tested with the remaining facilities. The NLP based method was integrated into a live HIE population exploration system and validated prospectively (July 1, 2013-June 30, 2014). Total of 18,295 codified CHF patients were included in Maine HIE. Among the 253,803 subjects without CHF codings, our case finding algorithm prospectively identified 2411 uncodified CHF cases. The positive predictive value (PPV) is 0.914, and 70.1% of these 2411 cases were found to be with CHF histories in the clinical notes. A CHF case finding algorithm was developed, tested and prospectively validated. The successful integration of the CHF case findings algorithm into the Maine HIE live system is expected to improve the Maine CHF care. Copyright © 2015. Published by Elsevier Ireland Ltd.
Chyrek, R; Jabłecka, A; Pupek-Musialik, D; Lowicki, Z
2000-08-01
67 year old patient with chronic heart failure and persistent atrial fibrillation had overdosed glycosides for several months. The symptoms of gastrointestinal system and nervous system appeared after long term therapy with toxic doses of glycosides. Originally depression was diagnosed based on the central nervous system disturbances. Even though overdose of glycosides was diagnosed the blood serum glycoside level was within the therapeutic limits. Based on the precise analysis of the data, it was concluded that the reason for normal blood serum glycoside level in this case was coexisting hyperthyreosis.
Kalya, Anantharam; Jaroszewski, Dawn; Pajaro, Octavio; Scott, Robert; Gopalan, Radha; Kasper, Diane; Arabia, Francisco
2013-01-01
Cardiac allograft rejection and failure may require mechanical circulatory support as bridge-to-retransplantation. Prognosis in this patient group is poor and implantable ventricular assist devices have had limited success due to organ failure associated with the high dose immunosuppression required to treat ongoing rejection. We present a case from our institution and the world-wide experience utilizing the SynCardia CardioWest Total Artificial Heart (TAH-t; SynCardia Systems, Inc., Tucson, AZ, USA) for replacement of the failing graft, recovery of patient and end-organ failure with ultimate bridge to retransplantation. We present our experience and review of world-wide experience for use of TAH-t in this type patient. © 2013 John Wiley & Sons A/S.
Gallart, X; Gomez, J C; Fernández-Valencia, J A; Combalía, A; Bori, G; García, S; Rios, J; Riba, J
2014-01-01
To evaluate the short-term results of an ultra high molecular weight polyethylene retentive cup in patients at high risk of dislocation, either primary or revision surgery. Retrospective review of 38 cases in order to determine the rate of survival and failure analysis of a constrained cemented cup, with a mean follow-up of 27 months. We studied demographic data, complications, especially re-dislocations of the prosthesis and, also the likely causes of system failure analyzed. In 21.05% (8 cases) were primary surgery and 78.95% were revision surgery (30 cases). The overall survival rate by Kaplan-Meier method was 70.7 months. During follow-up 3 patients died due to causes unrelated to surgery and 2 infections occurred. 12 hips had at least two previous surgeries done. It wasn't any case of aseptic loosening. Four patients presented dislocation, all with a 22 mm head (P=.008). Our statistical analysis didn't found relationship between the abduction cup angle and implant failure (P=.22). The ultra high molecular weight polyethylene retentive cup evaluated in this series has provided satisfactory short-term results in hip arthroplasty patients at high risk of dislocation. Copyright © 2014 SECOT. Published by Elsevier Espana. All rights reserved.
A Methodology for Quantifying Certain Design Requirements During the Design Phase
NASA Technical Reports Server (NTRS)
Adams, Timothy; Rhodes, Russel
2005-01-01
A methodology for developing and balancing quantitative design requirements for safety, reliability, and maintainability has been proposed. Conceived as the basis of a more rational approach to the design of spacecraft, the methodology would also be applicable to the design of automobiles, washing machines, television receivers, or almost any other commercial product. Heretofore, it has been common practice to start by determining the requirements for reliability of elements of a spacecraft or other system to ensure a given design life for the system. Next, safety requirements are determined by assessing the total reliability of the system and adding redundant components and subsystems necessary to attain safety goals. As thus described, common practice leaves the maintainability burden to fall to chance; therefore, there is no control of recurring costs or of the responsiveness of the system. The means that have been used in assessing maintainability have been oriented toward determining the logistical sparing of components so that the components are available when needed. The process established for developing and balancing quantitative requirements for safety (S), reliability (R), and maintainability (M) derives and integrates NASA s top-level safety requirements and the controls needed to obtain program key objectives for safety and recurring cost (see figure). Being quantitative, the process conveniently uses common mathematical models. Even though the process is shown as being worked from the top down, it can also be worked from the bottom up. This process uses three math models: (1) the binomial distribution (greaterthan- or-equal-to case), (2) reliability for a series system, and (3) the Poisson distribution (less-than-or-equal-to case). The zero-fail case for the binomial distribution approximates the commonly known exponential distribution or "constant failure rate" distribution. Either model can be used. The binomial distribution was selected for modeling flexibility because it conveniently addresses both the zero-fail and failure cases. The failure case is typically used for unmanned spacecraft as with missiles.
Code of Federal Regulations, 2014 CFR
2014-10-01
... operate, in the case of a machine or system; and, in each case, under such conditions as to establish that... request title within sixty (60) days after learning of the failure of the Contractor to disclose or to...
Code of Federal Regulations, 2012 CFR
2012-10-01
... operate, in the case of a machine or system; and, in each case, under such conditions as to establish that... request title within sixty (60) days after learning of the failure of the Contractor to disclose or to...
Code of Federal Regulations, 2013 CFR
2013-10-01
... operate, in the case of a machine or system; and, in each case, under such conditions as to establish that... request title within sixty (60) days after learning of the failure of the Contractor to disclose or to...
NASA Astrophysics Data System (ADS)
Huerta, N. J.; Fahrman, B.; Rod, K. A.; Fernandez, C. A.; Crandall, D.; Moore, J.
2017-12-01
Laboratory experiments provide a robust method to analyze well integrity. Experiments are relatively cheap, controlled, and repeatable. However, simplifying assumptions, apparatus limitations, and scaling are ubiquitous obstacles for translating results from the bench to the field. We focus on advancing the correlation between laboratory results and field conditions by characterizing how failure varies with specimen geometry using two experimental approaches. The first approach is designed to measure the shear bond strength between steel and cement in a down-scaled (< 3" diameter) well geometry. We use several cylindrical casing-cement-casing geometries that either mimic the scaling ratios found in the field or maximize the amount of metal and cement in the sample. We subject the samples to thermal shock cycles to simulate damage to the interfaces from operations. The bond was then measured via a push-out test. We found that not only did expected parameters, e.g. curing time, play a role in shear-bond strength but also that scaling of the geometry was important. The second approach is designed to observe failure of the well system due to pressure applied on the inside of a lab-scale (1.5" diameter) cylindrical casing-cement-rock geometry. The loading apparatus and sample are housed within an industrial X-ray CT scanner capable of imaging the system while under pressure. Radial tension cracks were observed in the cement after an applied internal pressure of 3000 psi and propagated through the cement and into the rock as pressure was increased. Based on our current suite of tests we find that the relationship between sample diameters and thicknesses is an important consideration when observing the strength and failure of well systems. The test results contribute to our knowledge of well system failure, evaluation and optimization of new cements, as well as the applicability of using scaled-down tests as a proxy for understanding field-scale conditions.
Bardet-Biedl syndrome: A rare cause of end stage renal disease.
Hemachandar, R
2015-01-01
Bardet-Biedl syndrome is a rare autosomal recessive disorder, recently categorized as ciliopathy characterized by dysfunction of primary cilia which results in myriad manifestations in various organ systems. Though renal abnormalities can occur in this syndrome, renal failure is a rare presentation. The author reports a case of 18-year-old female who presented with polydactyly, obesity, retinitis pigmentosa, learning disability and renal failure.
ERIC Educational Resources Information Center
Stephens, Alan A.; Atwater, J. Brian; Kannan, Vijay R.
2013-01-01
Purpose: The collapse of the sub-prime mortgage market parallels several earlier failures within the financial services sector, begging the question why the lessons of past failures were not learned. Throughout history from the tulip bulb crisis of the 1600s to the most recent economic crisis, decision-makers keep making the same mistakes. This…
Reliable dual-redundant sensor failure detection and identification for the NASA F-8 DFBW aircraft
NASA Technical Reports Server (NTRS)
Deckert, J. C.; Desai, M. N.; Deyst, J. J., Jr.; Willsky, A. S.
1978-01-01
A technique was developed which provides reliable failure detection and identification (FDI) for a dual redundant subset of the flight control sensors onboard the NASA F-8 digital fly by wire (DFBW) aircraft. The technique was successfully applied to simulated sensor failures on the real time F-8 digital simulator and to sensor failures injected on telemetry data from a test flight of the F-8 DFBW aircraft. For failure identification the technique utilized the analytic redundancy which exists as functional and kinematic relationships among the various quantities being measured by the different control sensor types. The technique can be used not only in a dual redundant sensor system, but also in a more highly redundant system after FDI by conventional voting techniques reduced to two the number of unfailed sensors of a particular type. In addition the technique can be easily extended to the case in which only one sensor of a particular type is available.
Yamazaki, Hiroshi; O'Leary, Stephen; Moran, Michelle; Briggs, Robert
2014-04-01
Accurate diagnosis of cochlear implant failures is important for management; however, appropriate strategies to assess possible device failures are not always clear. The purpose of this study is to understand correlation between causes of device failure and the presenting clinical symptoms as well as results of in situ integrity testing and to propose effective strategies for diagnosis of device failure. Retrospective case review. Cochlear implant center at a tertiary referral hospital. Twenty-seven cases with suspected device failure of Cochlear Nucleus systems (excluding CI512 failures) on the basis of deterioration in auditory perception from January 2000 to September 2012 in the Melbourne cochlear implant clinic. Clinical presentations and types of abnormalities on in situ integrity testing were compared with modes of device failure detected by returned device analysis. Sudden deterioration in auditory perception was always observed in cases with "critical damage": either fracture of the integrated circuit or most or all of the electrode wires. Subacute or gradually progressive deterioration in auditory perception was significantly associated with a more limited number of broken electrode wires. Cochlear implant mediated auditory and nonauditory symptoms were significantly associated with an insulation problem. An algorithm based on the time course of deterioration in auditory perception and cochlear implant-mediated auditory and nonauditory symptoms was developed on the basis of these retrospective analyses, to help predict the mode of device failure. In situ integrity testing, which included close monitoring of device function in routine programming sessions as well as repeating the manufacturer's integrity test battery, was sensitive enough to detect malfunction in all suspected device failures, and each mode of device failure showed a characteristic abnormality on in situ integrity testing. Our clinical manifestation-based algorithm combined with in situ integrity testing may be useful for accurate diagnosis and appropriate management of device failure. Close monitoring of device function in routine programming sessions as well as repeating the manufacturer's integrity test battery is important if the initial in situ integrity testing is inconclusive because objective evidence of failure in the implanted device is essential to recommend explantation/reimplantation.
Morales-Asencio, Jose M; Martin-Santos, Francisco J; Morilla-Herrera, Juan C; Fernández-Gallego, Magdalena Cuevas; Celdrán-Mañas, Miriam; Navarro-Moya, Francisco J; Rodríguez-Salvador, Maria M; Muñoz-Ronda, Francisco J; Gonzalo-Jiménez, Elena; Carrasco, Almudena Millán
2010-12-02
Chronic diseases account for nearly 60% of deaths around the world. The extent of this silent epidemic has not met determined responses in governments, policies or professionals in order to transform old Health Care Systems, configured for acute diseases. There is a large list of research about alternative models for people with chronic conditions, many of them with an advanced practice nurse as a key provider, as case management. But some methodological concerns raise, above all, the design of the intervention (intensity, frequency, components, etc). General: To develop the first and second phases (theorization and modeling) for designing a multifaceted case-management intervention in people with chronic conditions (COPD and heart failure) and their caregivers. 1) To identify key events in people living with chronic disease and their relation with the Health Care System, from their point of view. 2) To know the coping mechanisms developed by patients and their caregivers along the story with the disease. 3) To know the information processing and its utilization in their interactions with health care providers. 4) To detect potential unmet needs and the ways deployed by patients and their caregivers to resolve them. 5) To obtain a description from patients and caregivers, about their itineraries along the Health Care System, in terms of continuity, accessibility and comprehensiveness of care. 6) To build up a list of promising case-management interventions in patients with Heart Failure and COPD with this information in order to frame it into theoretical models for its reproducibility and conceptualization. 7) To undergo this list to expert judgment to assess its feasibility and pertinence in the Andalusian Health Care. Qualitative research with two phases: For the first five objectives, a qualitative technique with biographic stories will be developed and, for the remaining objectives, an expert consensus through Delphi technique, on the possible interventions yielded from the first phase. The study will be developed in the provinces of Almería, Málaga and Granada in the Southern Spain, from patients included in the Andalusian Health Care Service database with the diagnosis of COPD or Heart Failure, with the collaboration of case manager nurses and general practitioners for the assessment of their suitability to inclusion criteria. Patients and caregivers will be interviewed in their homes or their Health Centers, with their family or their case manager nurse as mediator. First of a series of studies intended to design a case-management service for people with heart failure and COPD, in the Andalusian Health Care System, where case management has been implemented since 2002. Accordingly with the steps of a theoretical model for complex interventions, in this study, theorization and intervention modeling phases will be developed.
Selected Systems Engineering Process Deficiencies and Their Consequences
NASA Technical Reports Server (NTRS)
Thomas, Lawrence Dale
2006-01-01
The systems engineering process is well established and well understood. While this statement could be argued in the light of the many systems engineering guidelines and that have been developed, comparative review of these respective descriptions reveal that they differ primarily in the number of discrete steps or other nuances, and are at their core essentially common. Likewise, the systems engineering textbooks differ primarily in the context for application of systems engineering or in the utilization of evolved tools and techniques, not in the basic method. Thus, failures in systems engineering cannot credibly be attributed to implementation of the wrong systems engineering process among alternatives. However, numerous systems failures can be attributed to deficient implementation of the systems engineering process. What may clearly be perceived as a system engineering deficiency in retrospect can appear to be a well considered system engineering efficiency in real time - an efficiency taken to reduce cost or meet a schedule, or more often both. Typically these efficiencies are grounded on apparently solid rationale, such as reuse of heritage hardware or software. Over time, unintended consequences of a systems engineering process deficiency may begin to be realized, and unfortunately often the consequence is system failure. This paper describes several actual cases of system failures that resulted from deficiencies in their systems engineering process implementation, including the Ariane 5 and the Hubble Space Telescope.
Selected systems engineering process deficiencies and their consequences
NASA Astrophysics Data System (ADS)
Thomas, L. Dale
2007-06-01
The systems engineering process is well established and well understood. While this statement could be argued in the light of the many systems engineering guidelines and that have been developed, comparative review of these respective descriptions reveal that they differ primarily in the number of discrete steps or other nuances, and are at their core essentially common. Likewise, the systems engineering textbooks differ primarily in the context for application of systems engineering or in the utilization of evolved tools and techniques, not in the basic method. Thus, failures in systems engineering cannot credibly be attributed to implementation of the wrong systems engineering process among alternatives. However, numerous system failures can be attributed to deficient implementation of the systems engineering process. What may clearly be perceived as a systems engineering deficiency in retrospect can appear to be a well considered system engineering efficiency in real time—an efficiency taken to reduce cost or meet a schedule, or more often both. Typically these efficiencies are grounded on apparently solid rationale, such as reuse of heritage hardware or software. Over time, unintended consequences of a systems engineering process deficiency may begin to be realized, and unfortunately often the consequence is systems failure. This paper describes several actual cases of system failures that resulted from deficiencies in their systems engineering process implementation, including the Ariane 5 and the Hubble Space Telescope.
NASA Astrophysics Data System (ADS)
Zheng, W.; Gao, J. M.; Wang, R. X.; Chen, K.; Jiang, Y.
2017-12-01
This paper put forward a new method of technical characteristics deployment based on Reliability Function Deployment (RFD) by analysing the advantages and shortages of related research works on mechanical reliability design. The matrix decomposition structure of RFD was used to describe the correlative relation between failure mechanisms, soft failures and hard failures. By considering the correlation of multiple failure modes, the reliability loss of one failure mode to the whole part was defined, and a calculation and analysis model for reliability loss was presented. According to the reliability loss, the reliability index value of the whole part was allocated to each failure mode. On the basis of the deployment of reliability index value, the inverse reliability method was employed to acquire the values of technology characteristics. The feasibility and validity of proposed method were illustrated by a development case of machining centre’s transmission system.
76 FR 45713 - Airworthiness Directives; Bombardier Inc. Model DHC-8-400 Series Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-01
... MLG extension/retraction system. * * * * * The unsafe condition is loss of control during landing. The... MLG extension/retraction system. This directive is to mandate the incorporation of a new maintenance... in the case of a failure of the normal MLG extension/retraction system. * * * * * The unsafe...
Altman, K D; Kelman, M; Ward, M P
2017-10-01
Canine parvovirus (CPV) is a highly contagious and worldwide cause of serious and often fatal disease in dogs, despite the widespread availability of vaccines. Which vaccine-related factors are associated with vaccination failure is largely unknown, and there are no reports from Australia. In this study - the first national population-level CPV study of its kind ever conducted - we analysed data on 594 cases of apparent CPV vaccination failure reported from an Australian national surveillance system to determine whether vaccine strain, type or administration protocol are risk factors for vaccination failures. The strain of CPV used in vaccine manufacture was not significantly associated with vaccination failure in clinical practice. The vaccine type (killed versus attenuated vaccine) for puppies diagnosed with CPV was associated with a lower mean age at time of vaccination (P=0.0495). The age at administration of the last CPV vaccination a puppy received prior to presenting with disease was a significant (P=0.0334) risk factor for vaccination failure, irrespective of whether the vaccine was marketed for a 10-week or 12-week or greater vaccination finish protocol. There was also a strong negative correlation between age at last vaccination prior to disease and vaccination failure (P<0.0001): the later a puppy received this last vaccination, the lower the risk of vaccination failure. This supports the hypothesis that the use of final vaccination in puppies at less than 16 weeks of age predisposes to vaccination failure and warrants a final age for vaccination recommendation to be at least 16 weeks for all canine parvovirus vaccines, especially in outbreak situations. The large number of cases identified in this study confirms that CPV vaccination failure is occurring in Australia. Veterinarians should consider CPV as a differential diagnosis in cases with appropriate clinical presentation, regardless of the reported vaccination status of the dog. Copyright © 2017 Elsevier B.V. All rights reserved.
Defense strategies for asymmetric networked systems under composite utilities
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rao, Nageswara S.; Ma, Chris Y. T.; Hausken, Kjell
We consider an infrastructure of networked systems with discrete components that can be reinforced at certain costs to guard against attacks. The communications network plays a critical, asymmetric role of providing the vital connectivity between the systems. We characterize the correlations within this infrastructure at two levels using (a) aggregate failure correlation function that specifies the infrastructure failure probability giventhe failure of an individual system or network, and (b) first order differential conditions on system survival probabilities that characterize component-level correlations. We formulate an infrastructure survival game between an attacker and a provider, who attacks and reinforces individual components, respectively.more » They use the composite utility functions composed of a survival probability term and a cost term, and the previously studiedsum-form and product-form utility functions are their special cases. At Nash Equilibrium, we derive expressions for individual system survival probabilities and the expected total number of operational components. We apply and discuss these estimates for a simplified model of distributed cloud computing infrastructure« less
Zeng, Y; Chen, Z Q; Qi, Q; Guo, Z Q; Li, W W; Sun, C G; Zhong, W Q; Jiang, Y
2016-07-01
To analyze the etiology of instrumentation failure after corrective surgery for thoracolumbar focal kyphosis, and make suggestion for treatment. Retrospective study for 8 patients with thoracolumbar focal kyphosis who underwent surgical treatment and suffered instrumentation failure from June 2005 to December 2011 was made. The surgical procedures included pedicle subtraction osteotomy (PSO), anterior opening-posterior closing osteotomy and correction (AOPC), and posterior vertebral column resection (VCR). The reasons of instrumentation failure were analyzed and revision surgeries were performed. The incidence of instrumentation failure was 6.3%. The average occurrence time was 22.5 months after surgery. Except one had failure in 3 months after surgery, all cases happened after 1 year. In this series, there were 5 cases with post-tuberculosis, 2 cases with post-traumatic kyphosis and 1 case with congenital kyphosis. For the surgical procedure, 7 cases underwent VCR and 1 case AOPC. After the instrumentation failure, all cases had back pain, and 3 of them had combined neurological symptoms. The reasons or risk factors of instrumentation failure included non-fusion of bone graft, VCR procedure, sink of the titanium mesh, insufficiency of anchor sites, and more severe kyphosis. All the 8 cases were treated with revision surgery and got good results. The instrumentation failure of thoracolumbar focal kyphosis is relatively late occurred, and can develop with various reasons. Positive revision surgery is suggested for the instrumentation failure, and good results can be expected.
Fault Tree Analysis as a Planning and Management Tool: A Case Study
ERIC Educational Resources Information Center
Witkin, Belle Ruth
1977-01-01
Fault Tree Analysis is an operations research technique used to analyse the most probable modes of failure in a system, in order to redesign or monitor the system more closely in order to increase its likelihood of success. (Author)
[Lung abscess and necrotizing pneumonia: chest tube insertion or surgery?].
Pagès, P-B; Bernard, A
2012-04-01
Lung abscesses and necrotizing pneumonia are rare complications of community-acquired pneumonia since the advent of antibiotics. Their management leans first of all on the antibiotic treatment adapted on the informed germs. However, in 11 to 20% of the cases of lung abscesses, this treatment is insufficient, and drainage, either endoscopic or percutaneous, must be envisaged. In first intention, we shall go to less invasive techniques: endoscopic or percutaneous radio-controlled. In case of failure of these techniques, a percutaneous surgical drainage by minithoracotomy will be performed. In the necrotizing pneumonia, because of the joint obstruction of the bronchus and blood vessels corresponding to a lung segment, the systemic antibiotic treatment will be poor effective. In case of failure of this one we shall propose, a percutaneous surgical drainage, especially if the necrosis limits itself to a single lobe. The surgical treatment will be reserved: in the failures of the strategy of surgical drainage, in the necroses extending in several lobes. Copyright © 2012 Elsevier Masson SAS. All rights reserved.
Mehra, R K; Dhingra, V K; Nish, Aggarwal; Vashist, R P
2008-10-01
To analyse the treatment outcome of Cat I smear positive relapse and failure cases and their fate when treated with Cat II regimen under RNTCP. All Cat I smear positive relapse and failure TB patients treated with Category II regimen from 1994 to 2005 in a chest clinic of Delhi were analysed in this retrospective study. The re-treatment outcome data for relapse and failure cases of Cat I when treated with Cat II regimen was reviewed. The study population included 5576 registered as Cat I sputum positive cases in Gulabi Bagh chest clinic from 1994 to 2005. A total of 190 (3.4%) failed on Cat I regimen. Further out of 4905 (87.9%) successfully treated Cat I patients, 442 (9%) presented as relapses. The treatment success rate for relapse and failure cases of Cat I when subsequently treated with Cat II regimen were 76.4% and 48.8% respectively, with a significantly higher failure rate (27.6%) among Cat I failures subsequently treated with Cat II regimen. The failure cases of Cat I subsequently treated with Cat II were observed to have a significantly lower success rates (p < 0.05) as compared to relapse cases. The need for reappraisal of Cat II re-treatment regimen for failure cases among Cat I is suggested.
A fuzzy case based reasoning tool for model based approach to rocket engine health monitoring
NASA Technical Reports Server (NTRS)
Krovvidy, Srinivas; Nolan, Adam; Hu, Yong-Lin; Wee, William G.
1992-01-01
In this system we develop a fuzzy case based reasoner that can build a case representation for several past anomalies detected, and we develop case retrieval methods that can be used to index a relevant case when a new problem (case) is presented using fuzzy sets. The choice of fuzzy sets is justified by the uncertain data. The new problem can be solved using knowledge of the model along with the old cases. This system can then be used to generalize the knowledge from previous cases and use this generalization to refine the existing model definition. This in turn can help to detect failures using the model based algorithms.
NASA Astrophysics Data System (ADS)
Pantazopoulos, G.; Vazdirvanidis, A.
2014-03-01
Emphasis is placed on the evaluation of corrosion failures of copper and machineable brass alloys during service. Typical corrosion failures of the presented case histories mainly focussed on stress corrosion cracking and dezincification that acted as the major degradation mechanisms in components used in piping and water supply systems. SEM assessment, coupled with EDS spectroscopy, revealed the main cracking modes together with the root-source(s) that are responsible for the damage initiation and evolution. In addition, fracture surface observations contributed to the identification of the incurred fracture mechanisms and potential environmental issues that stimulated crack initiation and propagation. Very frequently, the detection of chlorides among the corrosion products served as a suggestive evidence of the influence of working environment on passive layer destabilisation and metal dissolution.
Anderson, Cheryl I; Nelson, Catherine S; Graham, Corey F; Mosher, Benjamin D; Gohil, Kartik N; Morrison, Chet A; Schneider, Paul D; Kepros, John P
2012-09-01
Performance improvement driven by the review of surgical morbidity and mortality is often limited to critiques of individual cases with a focus on individual errors. Little attention has been given to an analysis of why a decision seemed right at the time or to lower-level root causes. The application of scientific performance improvement has the potential to bring to light deeper levels of understanding of surgical decision-making, care processes, and physician psychology. A comprehensive retrospective chart review of previously discussed morbidity and mortality cases was performed with an attempt to identify areas where we could better understand or influence behavior or systems. We avoided focusing on traditional sources of human error such as lapses of vigilance or memory. An iterative process was used to refine the practical areas for possible intervention. Definitions were then created for the major categories and subcategories. Of a sample of 152 presented cases, the root cause for 96 (63%) patient-related events was identified as uni-factorial in origin, with 51 (34%) cases strictly related to patient disease with no other contributing causes. Fifty-six cases (37%) had multiple causes. The remaining 101 cases (66%) were categorized into two areas where the ability to influence outcomes appeared possible. Technical issues were found in 27 (18%) of these cases and 74 (74%) were related to disorganized care problems. Of the 74 cases identified with disorganized care, 42 (42%) were related to failures in critical thinking, 18 (18%) to undisciplined treatment strategies, 8 (8%) to structural failures, and 6 (6%) were related to failures in situational awareness. On a comprehensive review of cases presented at the morbidity and mortality conference, disorganized care played a large role in the cases presented and may have implications for future curriculum changes. The failure to think critically, to deliver disciplined treatment strategies, to recognize structural failures, and to achieve situational awareness contributed to the morbidities and mortalities. Future research may determine if focused training in these areas improves patient outcomes. Copyright © 2012 Elsevier Inc. All rights reserved.
Microbe-Induced Inflammatory Signals Triggering Acquired Bone Marrow Failure Syndromes.
Espinoza, J Luis; Kotecha, Ritesh; Nakao, Shinji
2017-01-01
Acquired bone marrow failure syndromes encompass a unique set of disorders characterized by a reduction in the effective production of mature cells by the bone marrow (BM). In the majority of cases, these syndromes are the result of the immune-mediated destruction of hematopoietic stem cells or their progenitors at various stages of differentiation. Microbial infection has also been associated with hematopoietic stem cell injury and may lead to associated transient or persistent BM failure, and recent evidence has highlighted the potential impact of commensal microbes and their metabolites on hematopoiesis. We summarize the interactions between microorganisms and the host immune system and emphasize how they may impact the development of acquired BM failure.
Microbe-Induced Inflammatory Signals Triggering Acquired Bone Marrow Failure Syndromes
Espinoza, J. Luis; Kotecha, Ritesh; Nakao, Shinji
2017-01-01
Acquired bone marrow failure syndromes encompass a unique set of disorders characterized by a reduction in the effective production of mature cells by the bone marrow (BM). In the majority of cases, these syndromes are the result of the immune-mediated destruction of hematopoietic stem cells or their progenitors at various stages of differentiation. Microbial infection has also been associated with hematopoietic stem cell injury and may lead to associated transient or persistent BM failure, and recent evidence has highlighted the potential impact of commensal microbes and their metabolites on hematopoiesis. We summarize the interactions between microorganisms and the host immune system and emphasize how they may impact the development of acquired BM failure. PMID:28286502
NASA Technical Reports Server (NTRS)
Williams, F. E.; Lemon, R. S.
1974-01-01
The investigation of single actuator failures on the space shuttle solid rocket booster required the analysis of both square pattern and diamond pattern actuator configurations. It was determined that for failures occuring near or prior to the region of maximum dynamic pressure, control gain adjustments can be used to achieve virtually nominal mid-boost vehicle behavior. A distinct worst case failure condition was established near staging that could significantly delay staging. It is recommended that the square pattern be retained as a viable alternative to the baseline diamond pattern because the staging transient is better controlled resulting in earlier staging.
Kok, Beverley; Lester, Erica L W; Lee, William M; Hanje, A James; Stravitz, R Todd; Girgis, Safwat; Patel, Vaishali; Peck, Joshua R; Esber, Christopher; Karvellas, Constantine J
2018-06-01
Tumor necrosis factor-α antagonists (anti-TNF-α) have been associated with drug-induced liver injury. However, cases of anti-TNF-α-associated acute liver failure have only been rarely reported. To identify cases of anti-TNF-α-associated acute liver failure and evaluate patterns of liver injury and common characteristics to the cases. The United States Acute Liver Failure Study Group database was searched from 1998 to 2014. Four subjects were identified. A PubMed search for articles that reported anti-TNF-α-associated acute liver failure identified five additional cases. The majority of individuals affected were female (eight of nine cases). Age of individual ranged from 20 to 53 years. The most common anti-TNF-α agent associated with acute liver failure was infliximab (n = 8). The latency between initial drug exposure and acute liver failure ranged from 3 days to over a year. Of the nine cases, six required emergency LT. Liver biopsy was obtained in seven cases with a preponderance toward cholestatic-hepatitic features; none showed clear autoimmune features. Anti-TNF-α-associated acute liver failure displays somewhat different characteristics compared with anti-TNF-α-induced drug-induced liver injury. Infliximab was implicated in the majority of cases. Cholestatic-hepatitic features were frequently found on pre-transplant and explant histology.
Why do dental implants fail? Part I.
el Askary, A S; Meffert, R M; Griffin, T
1999-01-01
Many factors are attributed to failure of the dental implant, either directly or indirectly. The focus of this article is to define the causation of dental implant failure, as well as to present an evaluation of the implant literature regarding etiology, classification, management, and treatment of implant failures. This article will highlight the initial signs of implant failure with a view of some clinical cases in terms of classification and degrees of implant failure. Finally, a dental implant failure checklist is formulated to guide the practitioner in defining the cause of implant failure, be it infective or noninfective, and to establish percentages and frequency of occurrence. The checklist applies to all implant systems and will help to determine the factors responsible for causation and the repair procedures, whether they are at the surgical or restorative phases. The definition of implant failure is set forth in terms of ailing, failing, failed, and surviving implants, and the appropriate treatments and dispositions are outlined.
A case study in nonconformance and performance trend analysis
NASA Technical Reports Server (NTRS)
Maloy, Joseph E.; Newton, Coy P.
1990-01-01
As part of NASA's effort to develop an agency-wide approach to trend analysis, a pilot nonconformance and performance trending analysis study was conducted on the Space Shuttle auxiliary power unit (APU). The purpose of the study was to (1) demonstrate that nonconformance analysis can be used to identify repeating failures of a specific item (and the associated failure modes and causes) and (2) determine whether performance parameters could be analyzed and monitored to provide an indication of component or system degradation prior to failure. The nonconformance analysis of the APU did identify repeating component failures, which possibly could be reduced if key performance parameters were monitored and analyzed. The performance-trending analysis verified that the characteristics of hardware parameters can be effective in detecting degradation of hardware performance prior to failure.
An immune-inspired swarm aggregation algorithm for self-healing swarm robotic systems.
Timmis, J; Ismail, A R; Bjerknes, J D; Winfield, A F T
2016-08-01
Swarm robotics is concerned with the decentralised coordination of multiple robots having only limited communication and interaction abilities. Although fault tolerance and robustness to individual robot failures have often been used to justify the use of swarm robotic systems, recent studies have shown that swarm robotic systems are susceptible to certain types of failure. In this paper we propose an approach to self-healing swarm robotic systems and take inspiration from the process of granuloma formation, a process of containment and repair found in the immune system. We use a case study of a swarm performing team work where previous works have demonstrated that partially failed robots have the most detrimental effect on overall swarm behaviour. We have developed an immune inspired approach that permits the recovery from certain failure modes during operation of the swarm, overcoming issues that effect swarm behaviour associated with partially failed robots. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Clinical and pathological analysis of IgA nephropathy with chronic renal failure.
Liu, Yuyuan; Hu, Qinfeng; Shen, Ping; Tang, Li; Yuan, Gang; Zhou, Yongmei; Chai, Huaqi
2016-10-01
To investigative clinical and pathological characteristics of IgA nephropathy with chronic renal failure. Clinical and pathological findings from 65 cases of IgA nephropathy with chronic renal failure were reviewed. Pathological characteristics of all the cases were analyzed according to WHO definition and Oxford Classification. Evaluating the severity of pathological lesions by the Katafuchi R semiquantitative scoring system, and analyzing their relationship with clinical indexes of renal function. Of all 65 cases the male and female ratio was 1.4, and the mean age was 37 ± 13 years old. Levels of systolic pressure, mean arterial pressure (MAP), blood urea nitrogen (BUN), serum creatinine (Scr), uric acid (UA), album (Alb), serum IgG and 24 h urinary protein were related with eGRF level (p < 0.05, respectively). The most common pathological type was proliferative sclerosis glomerulonephritis (PSGN) and M1S1E0T0 according to WHO definition and Oxford Classification, respectively, and most of the 65 cases had glomerulosclerosis. Simple IgA deposition was the most common immunopathologic type. Of all the cases, 44.6% accompanied with C3 while 4.6% with C1q. Further analysis revealed there were no relationships between severity of pathological lesion and levels of clinical indexes (Scr and eGRF) (p > 0.05). IgA nephropathy with chronic renal failure usually occurred in young adults, and it had severe clinical condition and pathological changes, while there was no significant relationship between them.
Gonçalves-Venade, Gabriela; Lacerda-Príncipe, Nuno; Roncon-Albuquerque, Roberto; Paiva, José Artur
2018-05-01
Acute interstitial pneumonia (AIP) is a rare idiopathic interstitial lung disease with rapid progressive respiratory failure and high mortality. In the present report, three cases of AIP complicated by refractory respiratory failure supported with extracorporeal membrane oxygenation (ECMO) are presented. One male and two female patients (ages 27-59) were included. Venovenous ECMO support was provided using miniaturized systems, with two-site femoro-jugular circuit configuration. Despite lung protective ventilation, prone position and neuromuscular blockade, refractory respiratory failure of unknown etiology supervened (ratio of arterial oxygen partial pressure to fractional inspired oxygen 46-130) and ECMO was initiated after 3-7 days of mechanical ventilation. AIP diagnosis was established after exclusion of infectious and noninfectious acute respiratory distress syndrome on the basis of clinical and analytical data, bronchoalveolar lavage analysis and lung imaging, with a confirmatory surgical lung biopsy revealing diffuse alveolar damage of unknown etiology. Immunosuppressive treatment consisted in high-dose corticosteroids and cyclophosphamide in one case. Two patients survived to hospital discharge. ECMO allowed AIP diagnosis and treatment in the presence of refractory respiratory failure, therefore reducing ventilator-induced lung injury and bridging lung recovery in two patients. ECMO referral should be considered in refractory respiratory failure if AIP is suspected. © 2018 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.
Calculations of reliability predictions for the Apollo spacecraft
NASA Technical Reports Server (NTRS)
Amstadter, B. L.
1966-01-01
A new method of reliability prediction for complex systems is defined. Calculation of both upper and lower bounds are involved, and a procedure for combining the two to yield an approximately true prediction value is presented. Both mission success and crew safety predictions can be calculated, and success probabilities can be obtained for individual mission phases or subsystems. Primary consideration is given to evaluating cases involving zero or one failure per subsystem, and the results of these evaluations are then used for analyzing multiple failure cases. Extensive development is provided for the overall mission success and crew safety equations for both the upper and lower bounds.
Hemlock (Conium Maculatum) Poisoning In A Child.
Konca, Capan; Kahramaner, Zelal; Bosnak, Mehmet; Kocamaz, Halil
2014-03-01
Poison hemlock (Conium maculatum) is a plant that is poisonous for humans and animals. Accidental ingestion of the plant may result in central nervous system depression, respiratory failure, acute rhabdomyolysis, acute renal failure and even death. The main treatment of hemlock poisoning is supportive care. The case of a 6-year-old girl who was admitted to the emergency department with complaints of burning sensation in mouth, hypersalivation, tremor in hands and ataxia after ingestion of poison hemlock is presented here with clinical and laboratory features. In this case, we aim to report that accidental ingestion of plants resembling vegetables that are consumed daily can lead to serious complications and even death.
ERIC Educational Resources Information Center
Payne, Brian K.
2013-01-01
Treated initially as a social problem, elder abuse has only recently been criminalized. The criminalization of elder abuse involves penalizing offenders for actively abusing offenders as well as for violating mandatory reporting laws. Mandatory reporting laws exist to encourage professionals to report suspected cases of elder abuse. In this study,…
de Moura Xavier, José Carlos; de Andrade Azevedo, Irany; de Sousa Junior, Wilson Cabral; Nishikawa, Augusto
2013-02-01
Atmospheric pollutant monitoring constitutes a primordial activity in public policies concerning air quality. In São Paulo State, Brazil, the São Paulo State Environment Company (CETESB) maintains an automatic network which continuously monitors CO, SO(2), NO(x), O(3), and particulate matter concentrations in the air. The monitoring process accuracy is a fundamental condition for the actions to be taken by CETESB. As one of the support systems, a preventive maintenance program for the different analyzers used is part of the data quality strategy. Knowledge of the behavior of analyzer failure times could help optimize the program. To achieve this goal, the failure times of an ozone analyzer-considered a repairable system-were modeled by means of the nonhomogeneous Poisson process. The rate of occurrence of failures (ROCOF) was estimated for the intervals 0-70,800 h and 0-88,320 h, in which six and seven failures were observed, respectively. The results showed that the ROCOF estimate is influenced by the choice of the observation period, t(0) = 70,800 h and t(7) = 88,320 h in the cases analyzed. Identification of preventive maintenance actions, mainly when parts replacement occurs in the last interval of observation, is highlighted, justifying the alteration in the behavior of the inter-arrival times. The performance of a follow-up on each analyzer is recommended in order to record the impact of the performed preventive maintenance program on the enhancement of its useful life.
Gross, Thomas P; Liu, Fei; Webb, Lee A
2012-04-01
This report extends the follow-up for the largest center of the first multicenter US Food and Drug Administration investigational device exemption study on metal-on-metal hip resurfacing arthroplasty up to 11 years. A single surgeon performed 373 hip resurfacing arthroplasties using the hybrid Corin Cormet 2000 system. The Kaplan-Meier survivorship at 11 years was 93% when revision for any reason was used as an end point and 91% if radiographic failures were included. The clinical results demonstrate an acceptable failure rate with use of this system. Loosening of the cemented femoral components was the most common source of failure and occurred at all follow-up intervals. A learning curve that persisted for at least 200 cases was confirmed. All femoral neck fractures occurred before 6 months postoperatively. Copyright © 2012 Elsevier Inc. All rights reserved.
Torres-Miranda, Daisy; Al-Saffar, Farah; Ibrahim, Saif; Diaz-Font, Stephanie
2015-04-15
Methicillin-sensitive Staphylococcus aureus (MSSA) meningitis is a rare disease when not related to neurosurgery: there are only few reported cases in the literature to date. We describe a case that highlights not only meningeal but also diffuse and rapidly progressive systemic involvement with multi-organ failure. A 64-year-old male presented to our hospital with a chief complaint of acute worsening of his usual chronic lower back pain, progressive weakness in lower extremities and subjective fevers at home. Hospital course demonstrated MSSA bacteremia, of questionable source, that resulted in endocarditis affecting right and left heart in a patient with no history of intravenous drug use. The case was complicated by septic emboli to systemic circulation involving the kidneys, vertebral spine, lungs and brain with consequent meningitis and stroke, even when treated empirically with vancomycin and then switched to nafcillin as indicated. Even though MSSA infections are well known, there are very few case reports describing such an acute-simultaneous-manifestation of multi-end-organ failure, including meningitis and stroke. Our case, also presented with an uncommon manifestation of persistent infection dissemination despite adequate antibiotic treatment.
Kikuchi-Fujimoto disease: an unusual association with acute renal failure.
Silva, Amanda Feliciano da; Focaccia, Roberto; Oliveira, Allan Constantino de; Sementilli, Angelo; Reis, Gelvana Flávio Barreto
2010-01-01
Kikuchi-Fujimoto disease, also known as histiocytic necrotizing lymphadenitis of unknown etiopathogenesis, is a self-limited disease which frequently appears as feverish lymphadenomegaly, thus creating the need for differential diagnosis with lymphoma, systemic lupus erythematosus (SLE), infectious mononucleosis, cat-scratch disease, and toxoplasmosis with lymphonodal impairment. However, there are cases in which it may evolve with complications such as aseptic meningitis, cerebellar ataxia, and aseptic myocarditis. We are presenting a case of a 24-year-old man who had an initial picture of arthralgia, evening fever and adenomegaly. Kikuchi disease was diagnosed through lymph node biopsy with immunohistochemistry and evolves with severe systemic manifestations, such as pericarditis with cardiac tamponade, pneumonitis, hepatitis, and acute kidney failure - the latter has not been reported in literature yet. There was significant improvement of the clinical picture with prednisone.
Parametric instabilities of rotor-support systems with application to industrial ventilators
NASA Technical Reports Server (NTRS)
Parszewski, Z.; Krodkiemski, T.; Marynowski, K.
1980-01-01
Rotor support systems interaction with parametric excitation is considered for both unequal principal shaft stiffness (generators) and offset disc rotors (ventilators). Instability regions and types of instability are computed in the first case, and parametric resonances in the second case. Computed and experimental results are compared for laboratory machine models. A field case study of parametric vibrations in industrial ventilators is reported. Computed parametric resonances are confirmed in field measurements, and some industrial failures are explained. Also the dynamic influence and gyroscopic effect of supporting structures are shown and computed.
Application of failure mode and effects analysis (FMEA) to pretreatment phases in tomotherapy.
Broggi, Sara; Cantone, Marie Claire; Chiara, Anna; Di Muzio, Nadia; Longobardi, Barbara; Mangili, Paola; Veronese, Ivan
2013-09-06
The aim of this paper was the application of the failure mode and effects analysis (FMEA) approach to assess the risks for patients undergoing radiotherapy treatments performed by means of a helical tomotherapy unit. FMEA was applied to the preplanning imaging, volume determination, and treatment planning stages of the tomotherapy process and consisted of three steps: 1) identification of the involved subprocesses; 2) identification and ranking of the potential failure modes, together with their causes and effects, using the risk probability number (RPN) scoring system; and 3) identification of additional safety measures to be proposed for process quality and safety improvement. RPN upper threshold for little concern of risk was set at 125. A total of 74 failure modes were identified: 38 in the stage of preplanning imaging and volume determination, and 36 in the stage of planning. The threshold of 125 for RPN was exceeded in four cases: one case only in the phase of preplanning imaging and volume determination, and three cases in the stage of planning. The most critical failures appeared related to (i) the wrong or missing definition and contouring of the overlapping regions, (ii) the wrong assignment of the overlap priority to each anatomical structure, (iii) the wrong choice of the computed tomography calibration curve for dose calculation, and (iv) the wrong (or not performed) choice of the number of fractions in the planning station. On the basis of these findings, in addition to the safety strategies already adopted in the clinical practice, novel solutions have been proposed for mitigating the risk of these failures and to increase patient safety.
Meta 2: Lingua Franca Design and Integration Language
2011-08-01
the interest of scientific and technical information exchange, and its publication does not constitute the Government’s approval or disapproval of...buses must be powered in case of no more than 1 failure beyond the Minimum Equipment List (MEL – list of failure combinations that do not affect the...in real systems are rarely plain, but rather they are a complex logical combination of many factors and parameters. The specific processes that
Real-time attended home-polysomnography with telematic data transmission.
Bruyneel, Marie; Van den Broecke, Sandra; Libert, Walter; Ninane, Vincent
2013-08-01
Home-polysomnography (HPSG) has been proposed as a cost-effective alternative for obstructive sleep apnea (OSA) diagnosis. We assessed, in a feasibility study, whether telematic transmission using the Dream® and Sleepbox® technologies was associated with low HPSG failure rate. Patients referred by chest physicians for clinical suspicion of OSA underwent one HPSG, using Dream® and Sleepbox® (Medatec, Belgium), which is a wireless system able to communicate with Dream®, and with Internet through a wi-fi/3G interface. It is equipped with a digital infrared camera, and with a speaker/microphone system for bidirectional audio/video communication via Skype®. The Sleep Lab nurse performed a remote discontinuous monitoring of the PSG. In case of sensor loss, she called the patient who had been previously educated to replace the sensors. Twenty-one patients have been studied. 90% of the recordings were of excellent quality. We observed a 10% PSG failure rate: one failure of the Dream®, and one recording of poor quality. There were 2 successful Skype® interventions resulting in readjustment of the defective probes (nasal cannula and EEG). PSG signal visualization was possible in 90% of cases but Skype® connection was problematic in 19% of cases. However, patients could be reached by phone to solve the problem. Real-time attended HPSG through telematic data transmission is feasible and could be an interesting perspective to decrease the failure rate of home sleep studies, even if some technical aspects need to be improved. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Benarroch, E. E.; Smithson, I. L.; Low, P. A.; Parisi, J. E.
1998-01-01
The ventrolateral portion of the intermediate reticular formation of the medulla (ventrolateral medulla, VLM), including the C1/A1 groups of catecholaminergic neurons, is thought to be involved in control of sympathetic cardiovascular outflow, cardiorespiratory interactions, and reflex control of vasopressin release. As all these functions are affected in patients with multiple systems atrophy (MSA) with autonomic failure, we sought to test the hypothesis that catecholaminergic (tyrosine hydroxylase [TH]-positive) neurons of the VLM are depleted in these patients. Medullas were obtained at autopsy from 4 patients with MSA with prominent autonomic failure and 5 patients with no neurological disease. Patients with MSA had laboratory evidence of severe adrenergic sudomotor and cardiovagal failure. Tissue was immersion fixed in 2% paraformaldehyde at 4 degrees C for 24 hours and cut into 1-cm blocks in the coronal plane from throughout the medulla. Serial 50-microm sections were collected and one section every 300 microm was stained for TH. There was a pronounced depletion of TH neurons in the rostral VLM in all cases of MSA. There was also significant reduction of TH neurons in the caudal VLM in 3 MSA patients compared with 3 control subjects. In 2 MSA cases and in 2 control subjects, the thoracic spinal cord was available for study. There was also depletion of TH fibers and sympathetic preganglionic neurons (SPNs) in the 2 MSA cases examined. Thus, depletion of catecholaminergic neurons in the VLM may provide a substrate for some of the autonomic and endocrine manifestations of MSA.
Fracture and Failure in Micro- and Nano-Scale
NASA Astrophysics Data System (ADS)
Charitidis, Costas A.
Indentation and scratch in micro- and nano-scale are the most commonly used techniques for quantifying thin film and systems properties. Among them are different failure modes such as deformation, friction, fracture toughness, fatigue. Failure modes can be activated either by a cycle of indentation or by scratching of the samples to provide an estimation of the fracture toughness and interfacial fracture energies. In the present study, we report on the failure and fracture modes in two cases of engineering materials; that is transparent SiOx thin films onto poly(ethylene terephthalate) (PET) membranes and glass-ceramic materials. The SiOx/PET system meets the demands regarding scratch-resistance, wettability, biocompatibility, gas transmission, or friction, while maintaining the bulk characteristics of PET (such as easy processing, good mechanical properties, reasonably low permeability to oxygen and carbon dioxide gases (barrier properties), and good chemical coupling with antibacterial coatings). Glass-ceramic materials, since their first accidental production in the mid fifties by S.D. Stookey, have been used in a vast area of applications, from household cooktops and stoves, to missile nose cones and mirror mounts of orbital telescopes and from decorative wall coverings to medical applications. The fracture modes, namely transgranular and intergranular modes in glass-ceramic materials have paid less attention in literature comparing with ceramic materials. In the former case the crack paves its way irrespectively of the direction of the grain boundaries, i.e., the interfaces between the different phases. In the latter case the crack preferentially follows them, i.e., debonds the interfaces.
Acute and Recurrent Pericarditis.
Imazio, Massimo; Gaita, Fiorenzo
2017-11-01
Acute and recurrent pericarditis is the most common pericardial syndrome encountered in clinical practice either as an isolated process or as part of a systemic disease. The diagnosis is based on clinical evaluation, electrocardiogram, and echocardiography. The empiric therapy is based on nonsteroidal anti-inflammatory drugs plus colchicine as first choice, resorting to corticosteroids for specific indications (eg, systemic inflammatory disease on corticosteroids, pregnancy, renal failure, concomitant oral anticoagulants), for contraindications or failure of the first-line therapy. The most common complication is recurrence, occurring in up to 30% of cases after a first episode of pericarditis. Copyright © 2017 Elsevier Inc. All rights reserved.
Mechanical Properties and Failure of Biopolymers: Atomistic Reactions to Macroscale Response
Jung, GangSeob; Qin, Zhao
2017-01-01
The behavior of chemical bonding under various mechanical loadings is an intriguing mechanochemical property of biological materials, and the property plays a critical role in determining their deformation and failure mechanisms. Because of their astonishing mechanical properties and roles in constituting the basis of a variety of physiologically relevant materials, biological protein materials have been intensively studied. Understanding the relation between chemical bond networks (structures) and their mechanical properties offers great possibilities to enable new materials design in nanotechnology and new medical treatments for human diseases. Here we focus on how the chemical bonds in biological systems affect mechanical properties and how they change during mechanical deformation and failure. Three representative cases of biomaterials related to the human diseases are discussed in case studies, including: amyloids, intermediate filaments, and collagen, each describing mechanochemical features and how they relate to the pathological conditions at multiple scales. PMID:26108895
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chen, S; Guerrero, M; Zhang, B
Purpose: To implement a comprehensive non-measurement-based verification program for patient-specific IMRT QA Methods: Based on published guidelines, a robust IMRT QA program should assess the following components: 1) accuracy of dose calculation, 2) accuracy of data transfer from the treatment planning system (TPS) to the record-and-verify (RV) system, 3) treatment plan deliverability, and 4) accuracy of plan delivery. Results: We have implemented an IMRT QA program that consist of four components: 1) an independent re-calculation of the dose distribution in the patient anatomy with a commercial secondary dose calculation program: Mobius3D (Mobius Medical Systems, Houston, TX), with dose accuracy evaluationmore » using gamma analysis, PTV mean dose, PTV coverage to 95%, and organ-at-risk mean dose; 2) an automated in-house-developed plan comparison system that compares all relevant plan parameters such as MU, MLC position, beam iso-center position, collimator, gantry, couch, field size settings, and bolus placement, etc. between the plan and the RV system; 3) use of the RV system to check the plan deliverability and further confirm using “mode-up” function on treatment console for plans receiving warning; and 4) implementation of a comprehensive weekly MLC QA, in addition to routine accelerator monthly and daily QA. Among 1200 verifications, there were 9 cases of suspicious calculations, 5 cases of delivery failure, no data transfer errors, and no failure of weekly MLC QA. These 9 suspicious cases were due to the PTV extending to the skin or to heterogeneity correction effects, which would not have been caught using phantom measurement-based QA. The delivery failure was due to the rounding variation of MLC position between the planning system and RV system. Conclusion: A very efficient, yet comprehensive, non-measurement-based patient-specific QA program has been implemented and used clinically for about 18 months with excellent results.« less
van Esch, Edith M G; Welters, Marij J P; Jordanova, Ekaterina S; Trimbos, J Baptist M Z; van der Burg, Sjoerd H; van Poelgeest, Mariëtte I E
2012-07-01
Failure of the immune system to launch a strong and effective immune response to high-risk HPV is related to viral persistence and the development of anogenital (pre)malignant lesions such as vulvar intraepithelial neoplasia (VIN). Different forms of immunotherapy, aimed at overcoming the inertia of the immune system, have been developed and met with clinical success. Unfortunately these, in principal successful, therapeutic approaches also fail to induce clinical responses in a substantial number of cases. In this review, the authors summarize the traits of the immune response to HPV in healthy individuals and in patients with HPV-induced neoplasia. The potential mechanisms involved in the escape of HPV-induced lesions from the immune system indicate gaps in our knowledge. Finally, the interaction between the immune system and VIN is discussed with a special focus on the different forms of immunotherapy applied to treat VIN and the potential causes of therapy failure. The authors conclude that there are a number of pre-existing conditions that determine the patients' responsiveness to immunotherapy. An immunotherapeutic strategy in which different aspects of immune failure are attacked by complementary approaches, will improve the clinical response rate.
Closed-form solution of decomposable stochastic models
NASA Technical Reports Server (NTRS)
Sjogren, Jon A.
1990-01-01
Markov and semi-Markov processes are increasingly being used in the modeling of complex reconfigurable systems (fault tolerant computers). The estimation of the reliability (or some measure of performance) of the system reduces to solving the process for its state probabilities. Such a model may exhibit numerous states and complicated transition distributions, contributing to an expensive and numerically delicate solution procedure. Thus, when a system exhibits a decomposition property, either structurally (autonomous subsystems), or behaviorally (component failure versus reconfiguration), it is desirable to exploit this decomposition in the reliability calculation. In interesting cases there can be failure states which arise from non-failure states of the subsystems. Equations are presented which allow the computation of failure probabilities of the total (combined) model without requiring a complete solution of the combined model. This material is presented within the context of closed-form functional representation of probabilities as utilized in the Symbolic Hierarchical Automated Reliability and Performance Evaluator (SHARPE) tool. The techniques adopted enable one to compute such probability functions for a much wider class of systems at a reduced computational cost. Several examples show how the method is used, especially in enhancing the versatility of the SHARPE tool.
The Moral Imperative: The Case of the English Education System
ERIC Educational Resources Information Center
Spangenberg, Sabine; McIntosh, Bryan
2014-01-01
In England, social choice in education faces trade-offs between equity and efficiency. The scope of these trade-offs ranges from the introduction of choice to correcting "market failures" to reduce inequalities and restrict social injustices. The article analyses the English school education system and its relationship with social…
InterCon Travel Health: Case B
ERIC Educational Resources Information Center
Truman, Gregory E.; Pachamanova, Dessislava A.; Goldstein, Michael A.
2010-01-01
InterCon provides services to health insurers of foreign tourists who travel to the United States and Canada. Management wants to implement a new information system that will deal with several operational problems, but it is having difficulty securing the capital resources to fund the system's development. After an initial failure, the chief…
Pala, Elisa; Trovarelli, Giulia; Calabrò, Teresa; Angelini, Andrea; Abati, Caterina N; Ruggieri, Pietro
2015-03-01
Modular megaprostheses are now the most common method of reconstruction after segmental resection of the long bones in the lower extremities. Previous studies reported variable outcome and failure rates after knee megaprosthetic reconstructions. The objectives of this study were to analyze the results of a modular tumor prosthesis after resection of bone tumor around the knee with respect to (1) survivorship; (2) failure rate; (3) comparative survivorship against different sites of reconstructions and of primary and revision implants; and (4) functional results on the Musculoskeletal Tumor Society (MSTS) scoring system. Between 2003 and 2010, 247 rotating-hinge Global Modular Reconstruction System (GMRS) knee prostheses were implanted in our institute for malignant and aggressive benign tumors. During this time, that group represented 23% of the patients who had oncologic megaprosthesis reconstruction about the knee after resection of primary or metastatic bone tumors (247 of 1086 patients). In the other 77% of cases we used other types of oncologic prostheses. Before 2003 we used the older Howmedica Modular Resection System and Kotz Modular Femur/Tibia Replacement from 2003 we used mostly the GMRS but we continued to use the HMRS in some cases such as patients with poor prognoses, elderly patients, or metastatic patients. Sites included 187 distal femurs and 60 proximal tibias. Causes of megaprosthesis failure were classified according to Henderson et al. in five types: Type 1 (soft tissue failure), Type 2 (aseptic loosening), Type 3 (structural failure), Type 4 (infection), and Type 5 (tumor progression). Followup was at a minimum oncologic followup of 2 years (mean, 4 years; range, 2-8 years). Kaplan-Meier actuarial curves of implant survival to major failures were done. Functional results were analyzed according to the MSTS II system; 223 of the 247 were available for functional scoring (81%). At latest followup, among 175 treated patients for primary reconstruction, 117 are continuously disease-free, 26 have no evidence of disease after treatment of relapse, eight are alive with disease, and 24 died from disease. The overall failure rate of the megaprostheses in our series was 29.1% (72 of 247). Type 1 failure occurred in 8.5% (21 of 247) cases, Type 2 in 5.6% (14 of 247), Type 3 in 0%, Type 4 in 9.3% (23 of 247), and Type 5 in 5.6% (14 of 247). Kaplan-Meier curve showed an overall implant survival rate for all types of failures of 70% at 4 years and 58% at 8 years. Prosthetic survivorship for revisions was 80% at 5 years and for primary reconstructions was 60% at 5 years (p = 0.013). Survivorship to infection was 95% at 5 years for revision patients and 84% at 5 years for primary patients (p = 0.475). The mean MSTS score was 84 (25.2; range, 8-30) with no difference between sites of localization (24.7 in proximal tibia versus 25.4 in distal femur reconstruction; p = 0.306). Results at a minimum of 2 years with this modular prosthesis are satisfactory in terms of survivorship (both oncologic and reconstructive) and causes and rates of failure. Although these results seem comparable with other like implants, we will continue to follow this cohort, and we believe that comparative trials among the available megaprosthesis designs are called for. Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.
A Markov chain model for reliability growth and decay
NASA Technical Reports Server (NTRS)
Siegrist, K.
1982-01-01
A mathematical model is developed to describe a complex system undergoing a sequence of trials in which there is interaction between the internal states of the system and the outcomes of the trials. For example, the model might describe a system undergoing testing that is redesigned after each failure. The basic assumptions for the model are that the state of the system after a trial depends probabilistically only on the state before the trial and on the outcome of the trial and that the outcome of a trial depends probabilistically only on the state of the system before the trial. It is shown that under these basic assumptions, the successive states form a Markov chain and the successive states and outcomes jointly form a Markov chain. General results are obtained for the transition probabilities, steady-state distributions, etc. A special case studied in detail describes a system that has two possible state ('repaired' and 'unrepaired') undergoing trials that have three possible outcomes ('inherent failure', 'assignable-cause' 'failure' and 'success'). For this model, the reliability function is computed explicitly and an optimal repair policy is obtained.
Integrated Neural Flight and Propulsion Control System
NASA Technical Reports Server (NTRS)
Kaneshige, John; Gundy-Burlet, Karen; Norvig, Peter (Technical Monitor)
2001-01-01
This paper describes an integrated neural flight and propulsion control system. which uses a neural network based approach for applying alternate sources of control power in the presence of damage or failures. Under normal operating conditions, the system utilizes conventional flight control surfaces. Neural networks are used to provide consistent handling qualities across flight conditions and for different aircraft configurations. Under damage or failure conditions, the system may utilize unconventional flight control surface allocations, along with integrated propulsion control, when additional control power is necessary for achieving desired flight control performance. In this case, neural networks are used to adapt to changes in aircraft dynamics and control allocation schemes. Of significant importance here is the fact that this system can operate without emergency or backup flight control mode operations. An additional advantage is that this system can utilize, but does not require, fault detection and isolation information or explicit parameter identification. Piloted simulation studies were performed on a commercial transport aircraft simulator. Subjects included both NASA test pilots and commercial airline crews. Results demonstrate the potential for improving handing qualities and significantly increasing survivability rates under various simulated failure conditions.
Impaired face detection may explain some but not all cases of developmental prosopagnosia.
Dalrymple, Kirsten A; Duchaine, Brad
2016-05-01
Developmental prosopagnosia (DP) is defined by severe face recognition difficulties due to the failure to develop the visual mechanisms for processing faces. The two-process theory of face recognition (Morton & Johnson, 1991) implies that DP could result from a failure of an innate face detection system; this failure could prevent an individual from then tuning higher-level processes for face recognition (Johnson, 2005). Work with adults indicates that some individuals with DP have normal face detection whereas others are impaired. However, face detection has not been addressed in children with DP, even though their results may be especially informative because they have had less opportunity to develop strategies that could mask detection deficits. We tested the face detection abilities of seven children with DP. Four were impaired at face detection to some degree (i.e. abnormally slow, or failed to find faces) while the remaining three children had normal face detection. Hence, the cases with impaired detection are consistent with the two-process account suggesting that DP could result from a failure of face detection. However, the cases with normal detection implicate a higher-level origin. The dissociation between normal face detection and impaired identity perception also indicates that these abilities depend on different neurocognitive processes. © 2015 John Wiley & Sons Ltd.
NASA Technical Reports Server (NTRS)
Dunn, William R.; Corliss, Lloyd D.
1991-01-01
Paper examines issue of software safety. Presents four case histories of software-safety analysis. Concludes that, to be safe, software, for all practical purposes, must be free of errors. Backup systems still needed to prevent catastrophic software failures.
ERIC Educational Resources Information Center
Leonard, Jack
2011-01-01
Although the value of school-community partnerships is unquestioned, the reasons for success and failure are not sufficiently understood. This mixed-methods case study examines 60 years of partnering at one urban high school, using Bronfenbrenner's ecological systems theory to better understand the effect on student development as measured by…
In Situ, On-Demand Lubrication System Developed for Space Mechanisms
NASA Technical Reports Server (NTRS)
Marchetti, Mario; Pepper, Stephen V.; Jansen, Mark J.; Predmore, Roamer E.
2003-01-01
Many moving mechanical assemblies (MMA) for space mechanisms rely on liquid lubricants to provide reliable, long-term performance. The proper performance of the MMA is critical in assuring a successful mission. Historically, mission lifetimes were short and MMA duty cycles were minimal. As mission lifetimes were extended, other components, such as batteries and computers, failed before lubricated systems. However, improvements in these ancillary systems over the last decade have left the tribological systems of the MMAs as the limiting factor in determining spacecraft reliability. Typically, MMAs are initially lubricated with a very small charge that is supposed to last the entire mission lifetime, often well in excess of 5 years. In many cases, the premature failure of a lubricated component can result in mission failure.
Marinetto, Michael
2011-01-01
This paper explores the issue of joined-up governance by considering child protection failures, firstly, the case of Victoria Climbié who was killed by her guardians despite being known as an at risk child by various public agencies. The seeming inability of the child protection system to prevent Victoria Climbié's death resulted in a public inquiry under the chairmanship of Lord Laming. The Laming report of 2003 looked, in part, to the lack of joined-up working between agencies to explain this failure to intervene and made a number of recommendations to improve joined-up governance. Using evidence from detailed testimonies given by key personnel during the Laming Inquiry, the argument of this paper is that we cannot focus exclusively on formal structures or decision-making processes but must also consider the normal, daily and informal routines of professional workers. These very same routines may inadvertently culminate in the sort of systemic failures that lead to child protection tragedies. Analysis of the micro-world inhabited by professional workers would benefit most, it is argued here, from the policy-based concept of street-level bureaucracy developed by Michael Lipsky some 30 years ago. The latter half of the paper considers child protection failures that emerged after the Laming-inspired reforms. In particular, the case of ‘Baby P’ highlights, once again, how the working practices of street-level professionals, rather than a lack of joined-up systems, may possibly complement an analysis of, and help us to explain, failures in the child protection system. A Lipskian analysis generally offers, although there are some caveats, only pessimistic conclusions about the prospects of governing authorities being able to avoid future child protection disasters. These conclusions are not wholeheartedly accepted. There exists a glimmer of optimism because street-level bureaucrats still remain accountable, but not necessarily in terms of top-down relations of authority rather, in terms of interpersonal forms of accountability – accountability to professionals and citizen consumers of services.
Accidental Beam Losses and Protection in the LHC
NASA Astrophysics Data System (ADS)
Schmidt, R.; Working Group On Machine Protection
2005-06-01
At top energy (proton momentum 7 TeV/c) with nominal beam parameters, each of the two LHC proton beams has a stored energy of 350 MJ threatening to damage accelerator equipment in case of accidental beam loss. It is essential that the beams are properly extracted onto the dump blocks in case of failure since these are the only elements that can withstand full beam impact. Although the energy stored in the beams at injection (450 GeV/c) is about 15 times smaller compared to top energy, the beams must still be properly extracted in case of large accidental beam losses. Failures must be detected at a sufficiently early stage and initiate a beam dump. Quenches and power converter failures will be detected by monitoring the correct functioning of the hardware systems. In addition, safe operation throughout the cycle requires the use of beam loss monitors, collimators and absorbers. Ideas of detection of fast beam current decay, monitoring of fast beam position changes and monitoring of fast magnet current changes are discussed, to provide the required redundancy for machine protection.
Stochastic availability analysis of operational data systems in the Deep Space Network
NASA Technical Reports Server (NTRS)
Issa, T. N.
1991-01-01
Existing availability models of standby redundant systems consider only an operator's performance and its interaction with the hardware performance. In the case of operational data systems in the Deep Space Network (DSN), in addition to an operator system interface, a controller reconfigures the system and links a standby unit into the network data path upon failure of the operating unit. A stochastic (Markovian) process technique is used to model and analyze the availability performance and occurrence of degradation due to partial failures are quantitatively incorporated into the model. Exact expressions of the steady state availability and proportion degraded performance measures are derived for the systems under study. The interaction among the hardware, operator, and controller performance parameters and that interaction's effect on data availability are evaluated and illustrated for an operational data processing system.
Reconfigurable Control Design for the Full X-33 Flight Envelope
NASA Technical Reports Server (NTRS)
Cotting, M. Christopher; Burken, John J.
2001-01-01
A reconfigurable control law for the full X-33 flight envelope has been designed to accommodate a failed control surface and redistribute the control effort among the remaining working surfaces to retain satisfactory stability and performance. An offline nonlinear constrained optimization approach has been used for the X-33 reconfigurable control design method. Using a nonlinear, six-degree-of-freedom simulation, three example failures are evaluated: ascent with a left body flap jammed at maximum deflection; entry with a right inboard elevon jammed at maximum deflection; and landing with a left rudder jammed at maximum deflection. Failure detection and identification are accomplished in the actuator controller. Failure response comparisons between the nominal control mixer and the reconfigurable control subsystem (mixer) show the benefits of reconfiguration. Single aerosurface jamming failures are considered. The cases evaluated are representative of the study conducted to prove the adequate and safe performance of the reconfigurable control mixer throughout the full flight envelope. The X-33 flight control system incorporates reconfigurable flight control in the existing baseline system.
NASA Astrophysics Data System (ADS)
Tautz-Weinert, J.; Watson, S. J.
2016-09-01
Effective condition monitoring techniques for wind turbines are needed to improve maintenance processes and reduce operational costs. Normal behaviour modelling of temperatures with information from other sensors can help to detect wear processes in drive trains. In a case study, modelling of bearing and generator temperatures is investigated with operational data from the SCADA systems of more than 100 turbines. The focus is here on automated training and testing on a farm level to enable an on-line system, which will detect failures without human interpretation. Modelling based on linear combinations, artificial neural networks, adaptive neuro-fuzzy inference systems, support vector machines and Gaussian process regression is compared. The selection of suitable modelling inputs is discussed with cross-correlation analyses and a sensitivity study, which reveals that the investigated modelling techniques react in different ways to an increased number of inputs. The case study highlights advantages of modelling with linear combinations and artificial neural networks in a feedforward configuration.
Probabilistic Risk Assessment for Decision Making During Spacecraft Operations
NASA Technical Reports Server (NTRS)
Meshkat, Leila
2009-01-01
Decisions made during the operational phase of a space mission often have significant and immediate consequences. Without the explicit consideration of the risks involved and their representation in a solid model, it is very likely that these risks are not considered systematically in trade studies. Wrong decisions during the operational phase of a space mission can lead to immediate system failure whereas correct decisions can help recover the system even from faulty conditions. A problem of special interest is the determination of the system fault protection strategies upon the occurrence of faults within the system. Decisions regarding the fault protection strategy also heavily rely on a correct understanding of the state of the system and an integrated risk model that represents the various possible scenarios and their respective likelihoods. Probabilistic Risk Assessment (PRA) modeling is applicable to the full lifecycle of a space mission project, from concept development to preliminary design, detailed design, development and operations. The benefits and utilities of the model, however, depend on the phase of the mission for which it is used. This is because of the difference in the key strategic decisions that support each mission phase. The focus of this paper is on describing the particular methods used for PRA modeling during the operational phase of a spacecraft by gleaning insight from recently conducted case studies on two operational Mars orbiters. During operations, the key decisions relate to the commands sent to the spacecraft for any kind of diagnostics, anomaly resolution, trajectory changes, or planning. Often, faults and failures occur in the parts of the spacecraft but are contained or mitigated before they can cause serious damage. The failure behavior of the system during operations provides valuable data for updating and adjusting the related PRA models that are built primarily based on historical failure data. The PRA models, in turn, provide insight into the effect of various faults or failures on the risk and failure drivers of the system and the likelihood of possible end case scenarios, thereby facilitating the decision making process during operations. This paper describes the process of adjusting PRA models based on observed spacecraft data, on one hand, and utilizing the models for insight into the future system behavior on the other hand. While PRA models are typically used as a decision aid during the design phase of a space mission, we advocate adjusting them based on the observed behavior of the spacecraft and utilizing them for decision support during the operations phase.
Leveraging Client-Side DNS Failure Patterns to Identify Malicious Behaviors
2015-09-28
malicious behavior found in our dataset and (ii) to create ground truth to evaluate the system proposed in Section V. We begin by removing those cases that...2011. [10] S. Hao, N. Feamster, and R. Pandrangi, “Monitoring the Initial DNS Behavior of Malicious Domains,” in ACM IMC , 2011. [11] R. Perdisci et...distribution is unlimited. Leveraging Client-Side DNS Failure Patterns to Identify Malicious Behaviors The views, opinions and/or findings contained in
Pulmonary Sequestration: Early Diagnosis and Management
Wani, Sajad A.; Mufti, Gowher N.; Bhat, Nisar A.; Baba, Ajaz A.
2015-01-01
Intralobar sequestration is characterized by aberrant formation of nonfunctional lung tissue that has no communication with the bronchial tree and receives systemic arterial blood supply. Failure of earlier diagnosis can lead to recurrent pneumonia, failure to thrive, multiple hospital admissions, and more morbidity. The aim of this case report is to increase the awareness about the lung sequestration, to diagnose and treat it early, so that it is resected before repeated infection, and prevent the morbidity and mortality. PMID:26273485
Heart Failure in Sub-Saharan Africa
Bloomfield, Gerald S; Barasa, Felix A; Doll, Jacob A; Velazquez, Eric J
2013-01-01
The heart failure syndrome has been recognized as a significant contributor to cardiovascular disease burden in sub-Saharan African for many decades. Seminal knowledge regarding heart failure in the region came from case reports and case series of the early 20th century which identified infectious, nutritional and idiopathic causes as the most common. With increasing urbanization, changes in lifestyle habits, and ageing of the population, the spectrum of causes of HF has also expanded resulting in a significant burden of both communicable and non-communicable etiologies. Heart failure in sub-Saharan Africa is notable for the range of etiologies that concurrently exist as well as the healthcare environment marked by limited resources, weak national healthcare systems and a paucity of national level data on disease trends. With the recent publication of the first and largest multinational prospective registry of acute heart failure in sub-Saharan Africa, it is timely to review the state of knowledge to date and describe the myriad forms of heart failure in the region. This review discusses several forms of heart failure that are common in sub-Saharan Africa (e.g., rheumatic heart disease, hypertensive heart disease, pericardial disease, various dilated cardiomyopathies, HIV cardiomyopathy, hypertrophic cardiomyopathy, endomyocardial fibrosis, ischemic heart disease, cor pulmonale) and presents each form with regard to epidemiology, natural history, clinical characteristics, diagnostic considerations and therapies. Areas and approaches to fill the remaining gaps in knowledge are also offered herein highlighting the need for research that is driven by regional disease burden and needs. PMID:23597299
Morris, John A.; Carrillo, Ysela; Jenkins, Judith M.; Smith, Philip W.; Bledsoe, Sandy; Pichert, James; White, Andrew
2003-01-01
Objective To review all admissions (age > 13) to three surgical patient care centers at a single academic medical center between January 1, 1995, and December 6, 1999, for significant surgical adverse events. Summary Background Data Little data exist on the interrelationships between surgical adverse events, risk management, malpractice claims, and resulting indemnity payments to plaintiffs. The authors hypothesized that examination of this process would identify performance improvement opportunities overlooked by standard medical peer review; the risk of litigation would be constant across the three homogeneous patient care centers; and the risk management process would exceed the performance improvement process. Methods Data collected included patient demographics (age, gender, and employment status), hospital financials (hospital charges, costs, and financial class), and outcome. Outcome categories were medical (disability: <1 month, 1–6 months, permanent/death), legal (no legal action, settlement, summary judgment), financial (indemnity payments, legal fees, write-offs), and cause and effect analysis. Cause and effect analysis attempts to identify system failures contributing to adverse outcomes. This was determined by two independent analysts using the 17 Harvard criteria and subdividing these into subsystem causative factors. Results The study group consisted of 130 patients with surgical adverse events resulting in total liabilities of $8.2 million. The incidence of adverse events per 1,000 admissions across the three patient care centers was similar, but indemnity payments per 1,000 admissions varied (cardiothoracic = $30, women’s health = $90, trauma = $520). Patient demographics were not predictive of high-risk subgroups for adverse events or litigation. In terms of medical outcome, 51 patients had permanent disability or death, accounting for 98% of the indemnity payments. In terms of legal outcome, 103 patients received no indemnity payments, 15 patients received indemnity payments, four suits remain open, and in eight cases charges were written off ($0.121 million). To date, no cases have been adjudicated in court. Cause and effect analysis identified 390 system failures contributing to the adverse events (mean 3.0 failures per adverse event); there were 4.7 failures per adverse event in the 15 indemnity cases. Five categories of causes accounted for 75% of the failures (patient management, n = 104; communication, n = 89; administration, n = 33; documentation, n = 32; behavior, n = 23). The current medical review process would have identified 104 of 390 systems failures (37%). Conclusions This study demonstrates no rational link between the tort system and the reduction of adverse events. Sixty-three percent of contributing causes to adverse events were undetected by current medical review processes. Adverse events occur at the interface between different systems or disciplines and result from multiple failures. Indemnity costs per hospital day vary dramatically by patient care center (range $3.60–97.60 a day). The regionalization of healthcare is in jeopardy from the burden of high indemnity payments. PMID:12796581
Epstein, Nancy E
2010-04-07
To determine whether patients who become quadriplegic following cervical spine surgery are adequately compensated by our present medico-legal system. The outcomes of malpractice suits obtained from Verdict Search (East Islip, NY, USA), a medico-legal journal, were evaluated over a 20-year period. Although the present malpractice system generously rewards many quadriplegic patients with substantial settlements/ Plaintiffs' verdicts, a subset receive lesser reimbursements (verdicts/settlements], while others with defense verdicts receive no compensatory damages. Utilizing Verdict Search, 54 cases involving quadriplegia following cervical spine surgery were reviewed for a 20-year interval (1988-2008). The reason(s) for the suit, the defendants, the legal outcome, and the time to outcome were identified. Operations included 25 anterior cervical procedures, 22 posterior cervical operations, 1 circumferential cervical procedure, and 6 cases in which the cervical operations were not defined. The four most prominent legal allegations for suits included negligent surgery (47 cases), lack of informed consent (23 cases), failure to diagnose/treat (33 cases), and failure to brace (15 cases). Forty-four of the 54 suits included spine surgeons. There were 19 Plaintiffs' verdicts (average US $5.9 million, range US $540,000-US $18.4 million), and 20 settlements (average US $2.8 million, range US $66,500-US $12.0 million). Fifteen quadriplegic patients with defense verdicts received no compensatory damages. The average time to verdicts/settlements was 4.3 years. For 54 patients who were quadriplegic following cervical spine surgery, 15 (28%) with defense verdicts received no compensatory damages. Under a No-Fault system, quadriplegic patients would qualify for a "reasonable" level of compensation over a "shorter" time frame.
What factors determine the severity of hepatitis A-related acute liver failure?
Ajmera, V; Xia, G; Vaughan, G; Forbi, J C; Ganova-Raeva, L M; Khudyakov, Y; Opio, C K; Taylor, R; Restrepo, R; Munoz, S; Fontana, R J; Lee, W M
2011-07-01
The reason(s) that hepatitis A virus (HAV) infection may progress infrequently to acute liver failure are poorly understood. We examined host and viral factors in 29 consecutive adult patients with HAV-associated acute liver failure enrolled at 10 sites participating in the US ALF Study Group. Eighteen of twenty-four acute liver failure sera were PCR positive while six had no detectable virus. HAV genotype was determined using phylogenetic analysis and the full-length genome sequences of the HAV from a cute liver failure sera were compared to those from self-limited acute HAV cases selected from the CDC database. We found that rates of nucleotide substitution did not vary significantly between the liver failure and non-liver failure cases and there was no significant variation in amino acid sequences between the two groups. Four of 18 HAV isolates were sub-genotype IB, acquired from the same study site over a 3.5-year period. Sub-genotype IB was found more frequently among acute liver failure cases compared to the non-liver failure cases (chi-square test, P < 0.01). At another centre, a mother and her son presented with HAV and liver failure within 1 month of each other. Predictors of spontaneous survival included detectable serum HAV RNA, while age, gender, HAV genotype and nucleotide substitutions were not associated with outcome. The more frequent appearance of rapid viral clearance and its association with poor outcomes in acute liver failure as well as the finding of familial cases imply a possible host genetic predisposition that contributes to a fulminant course. Recurrent cases of the rare sub-genotype IB over several years at a single centre imply a community reservoir of infection and possible increased pathogenicity of certain infrequent viral genotypes. © 2010 Blackwell Publishing Ltd.
What factors determine the severity of hepatitis A-related acute liver failure?
Ajmera, V.; Xia, G.; Vaughan, G.; Forbi, J. C.; Ganova-Raeva, L. M.; Khudyakov, Y.; Opio, C. K.; Taylor, R.; Restrepo, R.; Munoz, S.; Fontana, R. J.; Lee, W. M.
2016-01-01
SUMMARY The reason(s) that hepatitis A virus (HAV) infection may progress infrequently to acute liver failure are poorly understood. We examined host and viral factors in 29 consecutive adult patients with HAV-associated acute liver failure enrolled at 10 sites participating in the US ALF Study Group. Eighteen of twenty-four acute liver failure sera were PCR positive while six had no detectable virus. HAV genotype was determined using phylogenetic analysis and the full-length genome sequences of the HAV from a cute liver failure sera were compared to those from self-limited acute HAV cases selected from the CDC database. We found that rates of nucleotide substitution did not vary significantly between the liver failure and non-liver failure cases and there was no significant variation in amino acid sequences between the two groups. Four of 18 HAV isolates were subgenotype IB, acquired from the same study site over a 3.5-year period. Sub-genotype IB was found more frequently among acute liver failure cases compared to the non-liver failure cases (chi-square test, P < 0.01). At another centre, a mother and her son presented with HAV and liver failure within 1 month of each other. Predictors of spontaneous survival included detectable serum HAV RNA, while age, gender, HAV genotype and nucleotide substitutions were not associated with outcome. The more frequent appearance of rapid viral clearance and its association with poor outcomes in acute liver failure as well as the finding of familial cases imply a possible host genetic predisposition that contributes to a fulminant course. Recurrent cases of the rare subgenotype IB over several years at a single centre imply a community reservoir of infection and possible increased pathogenicity of certain infrequent viral genotypes. PMID:21143345
Carcillo, Joseph A; Halstead, E Scott; Hall, Mark W; Nguyen, Trung C; Reeder, Ron; Aneja, Rajesh; Shakoory, Bita; Simon, Dennis
2017-06-01
We hypothesize that three inflammation pathobiology phenotypes are associated with increased inflammation, proclivity to develop features of macrophage activation syndrome, and multiple organ failure-related death in pediatric severe sepsis. Prospective cohort study comparing children with severe sepsis and any of three phenotypes: 1) immunoparalysis-associated multiple organ failure (whole blood ex vivo tumor necrosis factor response to endotoxin < 200 pg/mL), 2) thrombocytopenia-associated multiple organ failure (new onset thrombocytopenia with acute kidney injury and a disintegrin and metalloproteinase with a thrombospondin type 1 motif, member 13 activity < 57%), and/or 3) sequential multiple organ failure with hepatobiliary dysfunction (respiratory distress followed by liver dysfunction with soluble Fas ligand > 200 pg/mL), to those without any of these phenotypes. Tertiary children's hospital PICU. One hundred consecutive severe sepsis admissions. Clinical data were recorded daily, and blood was collected twice weekly. Multiple organ failure developed in 75 cases and eight died. Multiple organ failure cases with any of the three inflammation phenotypes (n = 37) had higher inflammation (C-reactive protein, p = 0.009 and ferritin, p < 0.001) than multiple organ failure cases without any of these phenotypes (n = 38) or cases with only single organ failure (n = 25). Development of features of macrophage activation syndrome and death were more common among multiple organ failure cases with any of the phenotypes (macrophage activation syndrome: 10/37, 27%; death: 8/37, 22%) compared to multiple organ failure cases without any phenotype (macrophage activation syndrome: 1/38, 3%; p = 0.003 and death: 0/38, 0%; p = 0.002). Our approach to phenotype categorization remains hypothetical, and the phenotypes identified need to be confirmed in multicenter studies of pediatric multiple organ dysfunction syndrome.
Control allocation for gimballed/fixed thrusters
NASA Astrophysics Data System (ADS)
Servidia, Pablo A.
2010-02-01
Some overactuated control systems use a control distribution law between the controller and the set of actuators, usually called control allocator. Beyond the control allocator, the configuration of actuators may be designed to be able to operate after a single point of failure, for system optimization and/or decentralization objectives. For some type of actuators, a control allocation is used even without redundancy, being a good example the design and operation of thruster configurations. In fact, as the thruster mass flow direction and magnitude only can be changed under certain limits, this must be considered in the feedback implementation. In this work, the thruster configuration design is considered in the fixed (F), single-gimbal (SG) and double-gimbal (DG) thruster cases. The minimum number of thrusters for each case is obtained and for the resulting configurations a specific control allocation is proposed using a nonlinear programming algorithm, under nominal and single-point of failure conditions.
Puttkammer, Nancy; Zeliadt, Steven; Balan, Jean Gabriel; Baseman, Janet; Destiné, Rodney; Domerçant, Jean Wysler; France, Garilus; Hyppolite, Nathaelf; Pelletier, Valérie; Raphael, Nernst Atwood; Sherr, Kenneth; Yuhas, Krista; Barnhart, Scott
2014-01-01
Background The adoption of electronic medical record systems in resource-limited settings can help clinicians monitor patients' adherence to HIV antiretroviral therapy (ART) and identify patients at risk of future ART failure, allowing resources to be targeted to those most at risk. Methods Among adult patients enrolled on ART from 2005–2013 at two large, public-sector hospitals in Haiti, ART failure was assessed after 6–12 months on treatment, based on the World Health Organization's immunologic and clinical criteria. We identified models for predicting ART failure based on ART adherence measures and other patient characteristics. We assessed performance of candidate models using area under the receiver operating curve, and validated results using a randomly-split data sample. The selected prediction model was used to generate a risk score, and its ability to differentiate ART failure risk over a 42-month follow-up period was tested using stratified Kaplan Meier survival curves. Results Among 923 patients with CD4 results available during the period 6–12 months after ART initiation, 196 (21.2%) met ART failure criteria. The pharmacy-based proportion of days covered (PDC) measure performed best among five possible ART adherence measures at predicting ART failure. Average PDC during the first 6 months on ART was 79.0% among cases of ART failure and 88.6% among cases of non-failure (p<0.01). When additional information including sex, baseline CD4, and duration of enrollment in HIV care prior to ART initiation were added to PDC, the risk score differentiated between those who did and did not meet failure criteria over 42 months following ART initiation. Conclusions Pharmacy data are most useful for new ART adherence alerts within iSanté. Such alerts offer potential to help clinicians identify patients at high risk of ART failure so that they can be targeted with adherence support interventions, before ART failure occurs. PMID:25390044
Maternal and fetal outcomes in pregnant women with heart failure.
Ng, Angie T; Duan, Lewei; Win, Theresa; Spencer, Hillard T; Lee, Ming-Sum
2018-05-25
The goal of this study is to report the prevalence, aetiology and clinical outcome of pregnant women with heart failure. This is a retrospective community-based cohort study that included pregnant women in the Kaiser Permanente Health System between 2003 and 2014. Women with heart failure were identified using International Classification of Disease, Ninth Revision codes. Medical records were manually reviewed to confirm diagnosis and adjudicate outcomes. In a cohort of 385 935 pregnancies, 488 (0.13%) had a diagnosis of heart failure, corresponding to 126 cases per 100 000 pregnancies. Peripartum cardiomyopathy was the most common cause of heart failure, accounting for 333 (68.2%) cases. Preterm birth and caesarean delivery were more common in patients with heart failure. Neonatal death rate was higher in the heart failure group (1.0% vs 0.4%, p=0.03). Infants delivered to women with heart failure had lower birth weights (3112.0±774.0 g vs 3331.9±575.5 g, p<0.001) and lower Apgar score at 1 min (7.9±1.5 vs 8.3±1.1, p<0.001). Median follow-up was 6.2 years (IQR 3.2-9.2). During follow-up, 7 (1.4%) in the heart failure group and 423 (0.11%) in the control group died. Heart failure was associated with a 7.7-fold increase risk of death (adjusted HR 7.7, 95% CI 3.6 to 16.4, p<0.001). Heart failure during pregnancy is associated with unfavourable fetal outcomes including prematurity and low birth weight. While the overall mortality rate was low, pregnant women with heart failure carried an excess risk of death compared with controls. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.
Puttkammer, Nancy; Zeliadt, Steven; Balan, Jean Gabriel; Baseman, Janet; Destiné, Rodney; Domerçant, Jean Wysler; France, Garilus; Hyppolite, Nathaelf; Pelletier, Valérie; Raphael, Nernst Atwood; Sherr, Kenneth; Yuhas, Krista; Barnhart, Scott
2014-01-01
The adoption of electronic medical record systems in resource-limited settings can help clinicians monitor patients' adherence to HIV antiretroviral therapy (ART) and identify patients at risk of future ART failure, allowing resources to be targeted to those most at risk. Among adult patients enrolled on ART from 2005-2013 at two large, public-sector hospitals in Haiti, ART failure was assessed after 6-12 months on treatment, based on the World Health Organization's immunologic and clinical criteria. We identified models for predicting ART failure based on ART adherence measures and other patient characteristics. We assessed performance of candidate models using area under the receiver operating curve, and validated results using a randomly-split data sample. The selected prediction model was used to generate a risk score, and its ability to differentiate ART failure risk over a 42-month follow-up period was tested using stratified Kaplan Meier survival curves. Among 923 patients with CD4 results available during the period 6-12 months after ART initiation, 196 (21.2%) met ART failure criteria. The pharmacy-based proportion of days covered (PDC) measure performed best among five possible ART adherence measures at predicting ART failure. Average PDC during the first 6 months on ART was 79.0% among cases of ART failure and 88.6% among cases of non-failure (p<0.01). When additional information including sex, baseline CD4, and duration of enrollment in HIV care prior to ART initiation were added to PDC, the risk score differentiated between those who did and did not meet failure criteria over 42 months following ART initiation. Pharmacy data are most useful for new ART adherence alerts within iSanté. Such alerts offer potential to help clinicians identify patients at high risk of ART failure so that they can be targeted with adherence support interventions, before ART failure occurs.
NASA Astrophysics Data System (ADS)
Idris, N. H.; Salim, N. A.; Othman, M. M.; Yasin, Z. M.
2018-03-01
This paper presents the Evolutionary Programming (EP) which proposed to optimize the training parameters for Artificial Neural Network (ANN) in predicting cascading collapse occurrence due to the effect of protection system hidden failure. The data has been collected from the probability of hidden failure model simulation from the historical data. The training parameters of multilayer-feedforward with backpropagation has been optimized with objective function to minimize the Mean Square Error (MSE). The optimal training parameters consists of the momentum rate, learning rate and number of neurons in first hidden layer and second hidden layer is selected in EP-ANN. The IEEE 14 bus system has been tested as a case study to validate the propose technique. The results show the reliable prediction of performance validated through MSE and Correlation Coefficient (R).
40 CFR 265.1053 - Standards: Compressors.
Code of Federal Regulations, 2010 CFR
2010-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 264.1053 - Standards: Compressors.
Code of Federal Regulations, 2010 CFR
2010-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 264.1053 - Standards: Compressors.
Code of Federal Regulations, 2011 CFR
2011-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 265.1053 - Standards: Compressors.
Code of Federal Regulations, 2011 CFR
2011-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 264.1053 - Standards: Compressors.
Code of Federal Regulations, 2014 CFR
2014-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 264.1053 - Standards: Compressors.
Code of Federal Regulations, 2013 CFR
2013-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 265.1053 - Standards: Compressors.
Code of Federal Regulations, 2013 CFR
2013-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 265.1053 - Standards: Compressors.
Code of Federal Regulations, 2012 CFR
2012-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 264.1053 - Standards: Compressors.
Code of Federal Regulations, 2012 CFR
2012-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
40 CFR 265.1053 - Standards: Compressors.
Code of Federal Regulations, 2014 CFR
2014-07-01
... equipped with a sensor that will detect failure of the seal system, barrier fluid system, or both. (e)(1) Each sensor as required in paragraph (d) of this section shall be checked daily or shall be equipped... compressor is located within the boundary of an unmanned plant site, in which case the sensor must be checked...
NASA Astrophysics Data System (ADS)
Iskandar, Ismed; Satria Gondokaryono, Yudi
2016-02-01
In reliability theory, the most important problem is to determine the reliability of a complex system from the reliability of its components. The weakness of most reliability theories is that the systems are described and explained as simply functioning or failed. In many real situations, the failures may be from many causes depending upon the age and the environment of the system and its components. Another problem in reliability theory is one of estimating the parameters of the assumed failure models. The estimation may be based on data collected over censored or uncensored life tests. In many reliability problems, the failure data are simply quantitatively inadequate, especially in engineering design and maintenance system. The Bayesian analyses are more beneficial than the classical one in such cases. The Bayesian estimation analyses allow us to combine past knowledge or experience in the form of an apriori distribution with life test data to make inferences of the parameter of interest. In this paper, we have investigated the application of the Bayesian estimation analyses to competing risk systems. The cases are limited to the models with independent causes of failure by using the Weibull distribution as our model. A simulation is conducted for this distribution with the objectives of verifying the models and the estimators and investigating the performance of the estimators for varying sample size. The simulation data are analyzed by using Bayesian and the maximum likelihood analyses. The simulation results show that the change of the true of parameter relatively to another will change the value of standard deviation in an opposite direction. For a perfect information on the prior distribution, the estimation methods of the Bayesian analyses are better than those of the maximum likelihood. The sensitivity analyses show some amount of sensitivity over the shifts of the prior locations. They also show the robustness of the Bayesian analysis within the range between the true value and the maximum likelihood estimated value lines.
[Primary systemic amyloidosis].
Tanasilović, Srdan; Zivanović, Dubravka; Nikolić, Milos; Tomović, Maja; Elezović, Ivo; Medenica, Ljiljana
2007-12-01
Systemic amyloidosis is a rare disorder which usually occurs in aged persons and has a poor prognosis. Systemic amyloidosis can be primary, occasionally associated with multiple myeloma, or secondary, associated with another disease. We presented a 72-year-old male patient with periocular purpura ("racoon sign") and waxy papules, petechiae and ecchymoses on the neck and thoracic area. Purpuric macules were present also on the lips and tongue which was edematous (macroglossia). The skin lesions occurred two years earlier, the patient lost more than 15 kilograms of the body mass for less than a year. Immunoelectrophoresis of urine and serum demonstrated the presence of immunoglobulin light chains of the circulating monoclonal protein. Histopathological examination of skin lesions showed Congo red positive deposits in the derm. Cardiac evaluation revealed the signs of heart failure, and renal evaluation revealed nephrotic syndrome, with excessive protein lost. He was treated with oral melphalan and prednisolone, and died 7 days after starting the therapy due to heart failure. This patient considered as a rare case with systemic amyloidosis highlights the importance of histopathological and physical examination in any cases with periocular purpura, petechiae, ecchymoses and macroglossia.
Degradation and ESR Failures in MnO2 Chip Tantalum Capacitors
NASA Technical Reports Server (NTRS)
Teverovsky, Alexander A.
2017-01-01
Equivalent series resistance (ESR) of chip tantalum capacitors determines the rate of energy delivery and power dissipation thus affecting temperature and reliability of the parts. Employment of advanced capacitors with reduced ESR decreases power losses and improves efficiency in power systems. Stability of ESR is essential for correct operations of power units and might cause malfunctioning and failures when ESR becomes too high or too low. Several cases with ESR values in CWR29 capacitors exceeding the specified limit that were observed recently raised concerns regarding environmental factors affecting ESR and the adequacy of the existing screening and qualification testing. In this work, results of stress testing of various types of military and commercial capacitors obtained over years by GSFC test lab and NEPP projects that involved ESR measurements are described. Environmental stress tests include testing in humidity and vacuum chambers, temperature cycling, long-term storage at high temperatures, and various soldering simulation tests. Note that in many cases parts failed due to excessive leakage currents or reduced breakdown voltages. However, only ESR-related degradation and failures are discussed. Mechanisms of moisture effect are discussed and recommendations to improve screening and qualification system are suggested.
Application of failure mode and effects analysis (FMEA) to pretreatment phases in tomotherapy
Broggi, Sara; Cantone, Marie Claire; Chiara, Anna; Muzio, Nadia Di; Longobardi, Barbara; Mangili, Paola
2013-01-01
The aim of this paper was the application of the failure mode and effects analysis (FMEA) approach to assess the risks for patients undergoing radiotherapy treatments performed by means of a helical tomotherapy unit. FMEA was applied to the preplanning imaging, volume determination, and treatment planning stages of the tomotherapy process and consisted of three steps: 1) identification of the involved subprocesses; 2) identification and ranking of the potential failure modes, together with their causes and effects, using the risk probability number (RPN) scoring system; and 3) identification of additional safety measures to be proposed for process quality and safety improvement. RPN upper threshold for little concern of risk was set at 125. A total of 74 failure modes were identified: 38 in the stage of preplanning imaging and volume determination, and 36 in the stage of planning. The threshold of 125 for RPN was exceeded in four cases: one case only in the phase of preplanning imaging and volume determination, and three cases in the stage of planning. The most critical failures appeared related to (i) the wrong or missing definition and contouring of the overlapping regions, (ii) the wrong assignment of the overlap priority to each anatomical structure, (iii) the wrong choice of the computed tomography calibration curve for dose calculation, and (iv) the wrong (or not performed) choice of the number of fractions in the planning station. On the basis of these findings, in addition to the safety strategies already adopted in the clinical practice, novel solutions have been proposed for mitigating the risk of these failures and to increase patient safety. PACS number: 87.55.Qr PMID:24036868
Failure criterion of glass fabric reinforced plastic laminates
NASA Technical Reports Server (NTRS)
Haga, O.; Hayashi, N.; Kasuya, K.
1986-01-01
Failure criteria are derived for several modes of failure (in unaxial tensile or compressive loading, or biaxial combined tensile-compressive loading) in the case of closely woven plain fabric, coarsely-woven plain fabric, or roving glass cloth reinforcements. The shear strength in the interaction formula is replaced by an equation dealing with tensile or compressive strength in the direction making a 45 degree angle with one of the anisotropic axes, for the uniaxial failure criteria. The interaction formula is useful as the failure criterion in combined tension-compression biaxial failure for the case of closely woven plain fabric laminates, but poor agreement is obtained in the case of coarsely woven fabric laminates.
Robust dynamic inversion controller design and analysis (using the X-38 vehicle as a case study)
NASA Astrophysics Data System (ADS)
Ito, Daigoro
A new way to approach robust Dynamic Inversion controller synthesis is addressed in this paper. A Linear Quadratic Gaussian outer-loop controller improves the robustness of a Dynamic Inversion inner-loop controller in the presence of uncertainties. Desired dynamics are given by the dynamic compensator, which shapes the loop. The selected dynamics are based on both performance and stability robustness requirements. These requirements are straightforwardly formulated as frequency-dependent singular value bounds during synthesis of the controller. Performance and robustness of the designed controller is tested using a worst case time domain quadratic index, which is a simple but effective way to measure robustness due to parameter variation. Using this approach, a lateral-directional controller for the X-38 vehicle is designed and its robustness to parameter variations and disturbances is analyzed. It is found that if full state measurements are available, the performance of the designed lateral-directional control system, measured by the chosen cost function, improves by approximately a factor of four. Also, it is found that the designed system is stable up to a parametric variation of 1.65 standard deviation with the set of uncertainty considered. The system robustness is determined to be highly sensitive to the dihedral derivative and the roll damping coefficients. The controller analysis is extended to the nonlinear system where both control input displacements and rates are bounded. In this case, the considered nonlinear system is stable up to 48.1° in bank angle and 1.59° in sideslip angle variations, indicating it is more sensitive to variations in sideslip angle than in bank angle. This nonlinear approach is further extended for the actuator failure mode analysis. The results suggest that the designed system maintains a high level of stability in the event of aileron failure. However, only 35% or less of the original stability range is maintained for the rudder failure case. Overall, this combination of controller synthesis and robustness criteria compares well with the mu-synthesis technique. It also is readily accessible to the practicing engineer, in terms of understanding and use.
ERIC Educational Resources Information Center
Emad, Gholamreza; Roth, Wolff Michael
2008-01-01
Purpose: The purpose of this paper is to highlight the contradictions in the current maritime education and training system (MET), which is based on competency-based education, training and assessment, and to theorize the failure to make the training useful. Design/methodology/approach: A case study of education and training in the international…
Profile and follow-up of patients with tuberculosis in a priority city in Brazil
Pereira, Jisleny da Cruz; Silva, Marcio Roberto; da Costa, Ronaldo Rodrigues; Guimarães, Mark Drew Crosland; Leite, Isabel Cristina Gonçalves
2015-01-01
OBJECTIVE To analyze the cases of tuberculosis and the impact of direct follow-up on the assessment of treatment outcomes. METHODS This open prospective cohort study evaluated 504 cases of tuberculosis reported in the Sistema de Informação de Agravos de Notificação (SINAN – Notifiable Diseases Information System) in Juiz de Fora, MG, Southeastern Brazil, between 2008 and 2009. The incidence of treatment outcomes was compared between a group of patients diagnosed with tuberculosis and directly followed up by monthly consultations during return visits (287) and a patient group for which the information was indirectly collected (217) through the city’s surveillance system. The Chi-square test was used to compare the percentages, with a significance level of 0.05. The relative risk (RR) was used to evaluate the differences in the incidence rate of each type of treatment outcome between the two groups. RESULTS Of the outcomes directly and indirectly evaluated, 18.5% and 3.2% corresponded to treatment default and 3.8% and 0.5% corresponded to treatment failure, respectively. The incidence of treatment default and failure was higher in the group with direct follow-up (p < 0.05) (RR = 5.72, 95%CI 2.65;12.34, and RR = 8.31, 95%CI 1.08;63.92, respectively). CONCLUSIONS A higher incidence of treatment default and failure was observed in the directly followed up group, and most of these cases were neglected by the disease reporting system. Therefore, effective measures are needed to improve the control of tuberculosis and data quality. PMID:25741659
NASA Technical Reports Server (NTRS)
Patre, Parag; Joshi, Suresh M.
2011-01-01
Decentralized adaptive control is considered for systems consisting of multiple interconnected subsystems. It is assumed that each subsystem s parameters are uncertain and the interconnection parameters are not known. In addition, mismatch can exist between each subsystem and its reference model. A strictly decentralized adaptive control scheme is developed, wherein each subsystem has access only to its own state but has the knowledge of all reference model states. The mismatch is estimated online for each subsystem and the mismatch estimates are used to adaptively modify the corresponding reference models. The adaptive control scheme is extended to the case with actuator failures in addition to mismatch.
Protection of health research participants in the United States: a review of two cases.
Douglass, Alison; Crampton, Peter
2004-06-01
Two research-related deaths and controversies in the United States during recent years have raised public concern over the safety of research participants. This paper explores the reasons why, in two studies, there was a failure of ethical oversight. The issues exposed by these failures have international relevance as they could possibly occur anywhere where human health research is carried out. Five factors that contributed to these failures are highlighted: 1. failure to support and resource research ethics committees; 2. failure of the research oversight process to adequately assess the risks and benefits of research, while giving undue emphasis to informed consent; 3. conflicts of interest arising from financial relationships and research ethics committee membership; 4. lack of consistent oversight of privately funded research; and 5. incompetent or intentional failure to adhere by ethical guidelines. There is considerable headway to be made in the United States, as in other countries, in the fostering and maintenance of robust systems of human research oversight.
Kim, Deog Kyeom; Lee, Jungsil; Park, Ju Hee; Yoo, Kwang Ha
2018-04-01
Acute exacerbation(s) of chronic obstructive pulmonary disease (AECOPD) tend to be critical and debilitating events leading to poorer outcomes in relation to chronic obstructive pulmonary disease (COPD) treatment modalities, and contribute to a higher and earlier mortality rate in COPD patients. Besides pro-active preventative measures intended to obviate acquisition of AECOPD, early recovery from severe AECOPD is an important issue in determining the long-term prognosis of patients diagnosed with COPD. Updated GOLD guidelines and recently published American Thoracic Society/European Respiratory Society clinical recommendations emphasize the importance of use of pharmacologic treatment including bronchodilators, systemic steroids and/or antibiotics. As a non-pharmacologic strategy to combat the effects of AECOPD, noninvasive ventilation (NIV) is recommended as the treatment of choice as this therapy is thought to be most effective in reducing intubation risk in patients diagnosed with AECOPD with acute respiratory failure. Recently, a few adjunctive modalities, including NIV with helmet and helium-oxygen mixture, have been tried in cases of AECOPD with respiratory failure. As yet, insufficient documentation exists to permit recommendation of this therapy without qualification. Although there are too few findings, as yet, to allow for regular andr routine application of those modalities in AECOPD, there is anecdotal evidence to indicate both mechanical and physiological benefits connected with this therapy. High-flow nasal cannula oxygen therapy is another supportive strategy which serves to improve the symptoms of hypoxic respiratory failure. The therapy also produced improvement in ventilatory variables, and it may be successfully applied in cases of hypercapnic respiratory failure. Extracorporeal carbon dioxide removal has been successfully attempted in cases of adult respiratory distress syndrome, with protective hypercapnic ventilatory strategy. Nowadays, it is reported that it was also effective in reducing intubation in AECOPD with hypercapnic respiratory failure. Despite the apparent need for more supporting evidence, efforts to improve efficacy of NIV have continued unabated. It is anticipated that these efforts will, over time, serve toprogressively decrease the risk of intubation and invasive mechanical ventilation in cases of AECOPD with acute respiratory failure. Copyright©2018. The Korean Academy of Tuberculosis and Respiratory Diseases.
NASA Technical Reports Server (NTRS)
Gaier, James R.; Siamidis, John; Larkin, Elizabeth M. G.
2010-01-01
The National Aeronautics and Space Administration (NASA) is currently developing a new universal docking mechanism for future space exploration missions called the Low Impact Docking System (LIDS). A candidate LIDS main interface seal design is a composite assembly of silicone elastomer seals vacuum molded into grooves in an electroless nickel plated aluminum retainer. The strength of the silicone-tometal bond is a critical consideration for the new system, especially due to the presence of small areas of disbond created during the molding process. In the work presented herein, seal-to-retainer bonds of subscale seal specimens with different sizes of intentional disbond were destructively tensile tested. Nominal specimens without intentional disbonds were also tested. Tension was applied either uniformly on the entire seal circumference or locally in one short circumferential length. Bond failure due to uniform tension produced a wide scatter of observable failure modes and measured load-displacement behaviors. Although the preferable failure mode for the seal-to-retainer bond is cohesive failure of the elastomer material, the dominant observed failure mode under the uniform loading condition was found to be the less desirable adhesive failure of the bond in question. The uniform tension case results did not show a correlation between disbond size and bond strength. Localized tension was found to produce failure either as immediate tearing of the elastomer material outside the bond region or as complete peel-out of the seal in one piece. The obtained results represent a valuable benchmark for comparison in the future between adhesion loads under various separation conditions and composite seal bond strength.
NASA Technical Reports Server (NTRS)
Vanschalkwyk, Christiaan M.
1992-01-01
We discuss the application of Generalized Parity Relations to two experimental flexible space structures, the NASA Langley Mini-Mast and Marshall Space Flight Center ACES mast. We concentrate on the generation of residuals and make no attempt to implement the Decision Function. It should be clear from the examples that are presented whether it would be possible to detect the failure of a specific component. We derive the equations from Generalized Parity Relations. Two special cases are treated: namely, Single Sensor Parity Relations (SSPR) and Double Sensor Parity Relations (DSPR). Generalized Parity Relations for actuators are also derived. The NASA Langley Mini-Mast and the application of SSPR and DSPR to a set of displacement sensors located at the tip of the Mini-Mast are discussed. The performance of a reduced order model that includes the first five models of the mast is compared to a set of parity relations that was identified on a set of input-output data. Both time domain and frequency domain comparisons are made. The effect of the sampling period and model order on the performance of the Residual Generators are also discussed. Failure detection experiments where the sensor set consisted of two gyros and an accelerometer are presented. The effects of model order and sampling frequency are again illustrated. The detection of actuator failures is discussed. We use Generalized Parity Relations to monitor control system component failures on the ACES mast. An overview is given of the Failure Detection Filter and experimental results are discussed. Conclusions and directions for future research are given.
Bach, Alex; Busto, Isabel
2005-02-01
A database consisting of 35291 milking records from 83 cows was built over a period of 10 months with the objectives of studying the effect of teat cup attachment failures and milking interval regularity on milk production with an automated milking system (AMS). The database collected records of lactation number, days in milk (DIM), milk production, interval between milkings (for both the entire udder and individual quarters in case of a teat cup attachment failure) and average and peak milk flows for each milking. The weekly coefficient of variation (CV) of milking intervals was used as a measure of milking regularity. DIM, milking intervals, and CV of milking intervals were divided into four categories coinciding with the four quartiles of their respective distributions. The data were analysed by analysis of variance with cow as a random effect and lactation number, DIM, the occurrence of a milking failure, and the intervals between milkings or the weekly CV of milking intervals as fixed effects. The incidence of attachment failures was 7.6% of total milkings. Milk production by quarters affected by a milking failure following the failure was numerically greater owing to the longer interval between milkings. When accounting for the effect of milking intervals, milk production by affected quarters following a milking failure was 26% lower than with regular milkings. However, the decrease in milk production by quarters affected by milking failures was more severe as DIM increased. Average and peak milk flows by quarters affected by a milking failure were lower than when milkings occurred normally. However, milk production recovered its former level within seven milkings following a milking failure. Uneven frequency (weekly CV of milking intervals >27%) decreased daily milk yield, and affected multiparous more negatively than primiparous cows.
Exploring hypotheses in attitude control fault diagnosis
NASA Technical Reports Server (NTRS)
Bell, Benjamin
1987-01-01
A system which analyzes telemetry and evaluates hypotheses to explain any anomalies that are observed is described. Results achieved from a sample set of failure cases are presented, followed by a brief discussion of the benefits derived from this approach.
Li-Ion Battery By-Pass Removal Qualification
NASA Astrophysics Data System (ADS)
Borthomieu, Y.; Pasquier, E.
2005-05-01
The reasons of the by-pass use on Space batteries is to avoid open circuit, short-circuit and dramatic performances drift on the power system. By-pass diodes are currently used in NiH2 batteries due to the high probability of open circuit at cell level. This probability is mainly linked to the possibility to have a hydrogen leak within the pressure vessel due to the high operating pressure (70 bars) that can induce cell open circuit.For the Lithium-Ion batteries, first items had bypass implemented by similarity, but:All the cell failure cases have been analyzed at battery level:- Cell Open circuit:In contrast to NiCd and NiH2 cells, Li-Ion cells can be put in parallel due to the fact the open circuit voltage (OCV) is linked to the State Of Charge (SOC).With cells in parallel, a battery open circuit failure can never be encountered even with a cell in open circuit.- Cell Short circuit:In case of cell short, the entire cells within the module will be shorted.- Cell capacity spread:If the capacities of cells in series are strongly diverging, the worst module limits the battery. In case the battery is no more able to deliver the requested power for which it was designed, the worst module has to be reversed. In reversal, a Li-Ion cell is self-shorted. So, the strong capacity decrease in one module leads to the short of this module.These three failure cases cover all the possible Li-Ion failure root causes.Considering these three events, the analysis demonstrates that the Li-Ion battery still functions in any case without any by-pass system because the design of the battery size always takes into account the loss of one module.Nevertheless, the by-pass removal should allow to:- Improve the battery reliability as each bypass unit represents a single - Reduce by at least 30 % of the total price of the battery,- Reduce significant weight at battery level,- Shorten the battery manufacturing lead time (at least8 months for by-pass purchasing), - Avoid US export licenses.A formal qualification of a Li-Ion battery without by- pass system is on going in the frame of an ESA ARTES 3 contract.
Organizational Failure in an NHS Hospital Trust: A Qualitative Study.
Ravaghi, Hamid; Mannion, Russell; Sajadi, Haniye Sadat
2015-01-01
The objective was to explore the key factors associated with organizational failure in an NHS Hospital Trust. This case study adopted a qualitative design. Fifty-seven semistructured interviews and document analyses were conducted as well. Data were analyzed using a framework analysis method. A range of symptoms of organizational performance failure was identified. These relate to a financial deficit, lack of good external relationships, inability to meet core targets, a lack of clear management systems, and low staff morale. These markers had not been taken seriously by the previous senior management team. Symptoms of failure were the reflection of presence of secondary and primary causes of failure. Poor managerial leadership, poor financial control and performance management, lack of open culture, distraction by 2 large projects, and the lack of clinician engagement were perceived as internal causes of failure and the high level of policy changes within the NHS as the key external cause. The level of deprivation in the area was also thought to have had a negative impact on performance. The findings reinforce and expand on those of recent studies across the public sector. Tracking an organization's performance and early diagnosis of performance problems, focusing on performance management systems, and taking into account contextual factors are issues that should be considered.
Fault detection and identification in missile system guidance and control: a filtering approach
NASA Astrophysics Data System (ADS)
Padgett, Mary Lou; Evers, Johnny; Karplus, Walter J.
1996-03-01
Real-world applications of computational intelligence can enhance the fault detection and identification capabilities of a missile guidance and control system. A simulation of a bank-to- turn missile demonstrates that actuator failure may cause the missile to roll and miss the target. Failure of one fin actuator can be detected using a filter and depicting the filter output as fuzzy numbers. The properties and limitations of artificial neural networks fed by these fuzzy numbers are explored. A suite of networks is constructed to (1) detect a fault and (2) determine which fin (if any) failed. Both the zero order moment term and the fin rate term show changes during actuator failure. Simulations address the following questions: (1) How bad does the actuator failure have to be for detection to occur, (2) How bad does the actuator failure have to be for fault detection and isolation to occur, (3) are both zero order moment and fine rate terms needed. A suite of target trajectories are simulated, and properties and limitations of the approach reported. In some cases, detection of the failed actuator occurs within 0.1 second, and isolation of the failure occurs 0.1 after that. Suggestions for further research are offered.
Failure mechanisms and closed reduction of a constrained tripolar acetabular liner.
Robertson, William J; Mattern, Christopher J; Hur, John; Su, Edwin P; Pellicci, Paul M
2009-02-01
Unlike traditional bipolar constrained liners, the Osteonics Omnifit constrained acetabular insert is a tripolar device, consisting of an inner bipolar bearing articulating within an outer, true liner. Every reported failure of the Omnifit tripolar implant has been by failure at the shell-bone interface (Type I failure), failure at the shell-liner interface (Type II failure), or failure of the locking mechanism resulting in dislocation of the bipolar-liner interface (Type III failure). In this report we present two cases of failure of the Omnifit tripolar at the bipolar-femoral head interface. To our knowledge, these are the first reported cases of failure at the bipolar-femoral head interface (Type IV failure). In addition, we described the first successful closed reduction of a Type IV failure.
Underground storage systems for high-pressure air and gases
NASA Technical Reports Server (NTRS)
Beam, B. H.; Giovannetti, A.
1975-01-01
This paper is a discussion of the safety and cost of underground high-pressure air and gas storage systems based on recent experience with a high-pressure air system installed at Moffett Field, California. The system described used threaded and coupled oil well casings installed vertically to a depth of 1200 ft. Maximum pressure was 3000 psi and capacity was 500,000 lb of air. A failure mode analysis is presented, and it is shown that underground storage offers advantages in avoiding catastrophic consequences from pressure vessel failure. Certain problems such as corrosion, fatigue, and electrolysis are discussed in terms of the economic life of such vessels. A cost analysis shows that where favorable drilling conditions exist, the cost of underground high-pressure storage is approximately one-quarter that of equivalent aboveground storage.
Retransplant Due to Fulminant Hepatic Failure From Hepatitis E Virus: A Case Report.
Tenorio González, E; Robles Díaz, M; Sanjuan Jiménez, R; González Grande, R; Olmedo Martín, R V; Rodrigo López, J M; Jiménez Pérez, M
2018-03-01
Hepatitis E virus (HEV) usually causes self-limiting acute liver infections from fecal or oral transmission, though other routes of infection exist (vertical transmission, blood transfusion, zoonosis). It may give rise to fulminant hepatic failure in 1% of cases. Cases have recently been reported of chronic infection evolving to cirrhosis in immunosuppressed patients, such as those with a liver or kidney transplant. Nonetheless, development of acute liver failure in these patients is exceptional, with few cases published. We present a case of acute liver failure due to HEV in a liver transplant patient who required a liver retransplant 9 years after receiving the original transplant. Copyright © 2017 Elsevier Inc. All rights reserved.
Leigh and Leigh-like syndrome in children and adults.
Finsterer, Josef
2008-10-01
Leigh syndrome (also termed subacute, necrotizing encephalopathy) is a devastating neurodegenerative disorder, characterized by almost identical brain changes, e.g., focal, bilaterally symmetric lesions, particularly in the basal ganglia, thalamus, and brainstem, but with considerable clinical and genetic heterogeneity. Clinically, Leigh syndrome is characterized by a wide variety of abnormalities, from severe neurologic problems to a near absence of abnormalities. Most frequently the central nervous system is affected, with psychomotor retardation, seizures, nystagmus, ophthalmoparesis, optic atrophy, ataxia, dystonia, or respiratory failure. Some patients also present with peripheral nervous system involvement, including polyneuropathy or myopathy, or non-neurologic abnormalities, e.g., diabetes, short stature, hypertrichosis, cardiomyopathy, anemia, renal failure, vomiting, or diarrhea (Leigh-like syndrome). In the majority of cases, onset is in early childhood, but in a small number of cases, adults are affected. In the majority of cases, dysfunction of the respiratory chain (particularly complexes I, II, IV, or V), of coenzyme Q, or of the pyruvate dehydrogenase complex are responsible for the disease. Associated mutations affect genes of the mitochondrial or nuclear genome. Leigh syndrome and Leigh-like syndrome are the mitochondrial disorders with the largest genetic heterogeneity.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-25
...] during its retraction. In case of RAT failure or malfunction, it will not provide electrical power to... [the] aircraft, due to downlock pin not [being] pull[ed] during its retraction. In case of RAT failure... [being] pull[ed] during its retraction. In case of RAT failure or malfunction, it will not provide...
Canonical failure modes of real-time control systems: insights from cognitive theory
NASA Astrophysics Data System (ADS)
Wallace, Rodrick
2016-04-01
Newly developed necessary conditions statistical models from cognitive theory are applied to generalisation of the data-rate theorem for real-time control systems. Rather than graceful degradation under stress, automatons and man/machine cockpits appear prone to characteristic sudden failure under demanding fog-of-war conditions. Critical dysfunctions span a spectrum of phase transition analogues, ranging from a ground state of 'all targets are enemies' to more standard data-rate instabilities. Insidious pathologies also appear possible, akin to inattentional blindness consequent on overfocus on an expected pattern. Via no-free-lunch constraints, different equivalence classes of systems, having structure and function determined by 'market pressures', in a large sense, will be inherently unreliable under different but characteristic canonical stress landscapes, suggesting that deliberate induction of failure may often be relatively straightforward. Focusing on two recent military case histories, these results provide a caveat emptor against blind faith in the current path-dependent evolutionary trajectory of automation for critical real-time processes.
Development Of Knowledge Systems For Trouble Shooting Complex Production Machinery
NASA Astrophysics Data System (ADS)
Sanford, Richard L.; Novak, Thomas; Meigs, James R.
1987-05-01
This paper discusses the use of knowledge base system software for microcomputers to aid repairmen in diagnosing electrical failures in complex mining machinery. The knowledge base is constructed to allow the user to input initial symptoms of the failed machine, and the most probable cause of failure is traced through the knowledge base, with the software requesting additional information such as voltage or resistance measurements as needed. Although the case study presented is for an underground mining machine, results have application to any industry using complex machinery. Two commercial expert-system development tools (M1 TM and Insight 2+TM) and an Al language (Turbo PrologTM) are discussed with emphasis on ease of application and suitability for this study.
Kaliyev, Rymbay; Kapyshev, Timur; Goncharov, Alex; Lesbekov, Timur; Pya, Yuri
2015-01-01
Use of extracorporeal membrane oxygenation (ECMO) for severe cardiopulmonary failure has increased because of improved outcomes. A specially designed ECMO transport system allows for safe transport of patients over long distances. We report a 28-year-old pregnant woman (26 weeks gestation) with acute respiratory distress syndrome in whom ECMO support was necessary for survival, and she was transported to another facility 1,155 km away with the aid of the portable ECMO system. Transport was uneventful, and the patient's condition remained stable. Acute respiratory distress syndrome improved gradually until the patient was discharged from the hospital with excellent maternal and fetal outcome.
Shen, H; Xu, Y; Dickinson, B T
2014-11-18
Inspired by sensing strategies observed in birds and bats, a new attitude control concept of directly using real-time pressure and shear stresses has recently been studied. It was shown that with an array of onboard airflow sensors, small unmanned aircraft systems can promptly respond to airflow changes and improve flight performances. In this paper, a mapping function is proposed to compute aerodynamic moments from the real-time pressure and shear data in a practical and computationally tractable formulation. Since many microscale airflow sensors are embedded on the small unmanned aircraft system surface, it is highly possible that certain sensors may fail. Here, an adaptive control system is developed that is robust to sensor failure as well as other numerical mismatches in calculating real-time aerodynamic moments. The advantages of the proposed method are shown in the following simulation cases: (i) feedback pressure and wall shear data from a distributed array of 45 airflow sensors; (ii) 50% failure of the symmetrically distributed airflow sensor array; and (iii) failure of all the airflow sensors on one wing. It is shown that even if 50% of the airflow sensors have failures, the aircraft is still stable and able to track the attitude commands.
Nonacetaminophen Drug-Induced Acute Liver Failure.
Thomas, Arul M; Lewis, James H
2018-05-01
Acute liver failure of all causes is diagnosed in between 2000 and 2500 patients annually in the United States. Drug-induced acute liver failure is the leading cause of acute liver failure, accounting for more than 50% of cases. Nonacetaminophen drug injury represents 11% of all cases in the latest registry from the US Acute Liver Failure Study Group. Although rare, acute liver failure is clinically dramatic when it occurs, and requires a multidisciplinary approach to management. In contrast with acetaminophen-induced acute liver failure, non-acetaminophen-induced acute liver failure has a more ominous prognosis with a lower liver transplant-free survival. Copyright © 2018 Elsevier Inc. All rights reserved.
Inversion Method for Early Detection of ARES-1 Case Breach Failure
NASA Technical Reports Server (NTRS)
Mackey, Ryan M.; Kulikov, Igor K.; Bajwa, Anupa; Berg, Peter; Smelyanskiy, Vadim
2010-01-01
A document describes research into the problem of detecting a case breach formation at an early stage of a rocket flight. An inversion algorithm for case breach allocation is proposed and analyzed. It is shown how the case breach can be allocated at an early stage of its development by using the rocket sensor data and the output data from the control block of the rocket navigation system. The results are simulated with MATLAB/Simulink software. The efficiency of an inversion algorithm for a case breach location is discussed. The research was devoted to the analysis of the ARES-l flight during the first 120 seconds after the launch and early prediction of case breach failure. During this time, the rocket is propelled by its first-stage Solid Rocket Booster (SRB). If a breach appears in SRB case, the gases escaping through it will produce the (side) thrust directed perpendicular to the rocket axis. The side thrust creates torque influencing the rocket attitude. The ARES-l control system will compensate for the side thrust until it reaches some critical value, after which the flight will be uncontrollable. The objective of this work was to obtain the start time of case breach development and its location using the rocket inertial navigation sensors and GNC data. The algorithm was effective for the detection and location of a breach in an SRB field joint at an early stage of its development.
NASA Astrophysics Data System (ADS)
Gaulke, Linda S.; Weiyang, Xiao; Scanlon, Andrew; Henck, Amanda; Hinckley, Tom
2010-01-01
The administration of Jiuzhaigou National Park in Sichuan Province, China, is in the process of considering a range of upgrades to their sanitation and wastewater treatment systems. Their case history involves an ongoing series of engineering design flaws and management failures. The administration of the Park identified sustainability, environmental protection, and education goals for their sanitation and wastewater treatment system. To meet the goal of sustainability, environmental and economic concerns of the Park’s administration had to be balanced with socio-cultural needs. An advanced reconnaissance method was developed that identified reasons for previous failures, conducted stakeholder analysis and interviews, determined evaluation criteria, and introduced innovative alternatives with records of successful global implementations. This evaluation also helped the Park to better define their goals . To prevent future failures, the administration of the Park must commit to a balanced and thorough evaluation process for selection of a final alternative and institute effective long-term management and monitoring of systems. In addition, to meet goals and achieve energy efficient, cost-effective use of resources, the Park must shift their thinking from one of waste disposal to resource recovery. The method and criteria developed for this case study provides a framework to aid in the successful implementation of sanitation projects in both underdeveloped and developed areas of the world, incorporating socio-cultural values and resource recovery for a complex group of stakeholders.
Pheochromocytoma presenting with rhabdomyolysis and acute renal failure: a case report.
Celik, Huseyin; Celik, Ozlem; Guldiken, Sibel; Inal, Volkan; Puyan, Fulya Oz; Tugrul, Armagan
2014-02-01
Rhabdomyolysis ranges from an asymptomatic illness with elevated creatine kinase levels to a life-threatening condition associated with extreme elevations in creatine kinase, electrolyte imbalances, acute renal failure, and disseminated intravascular coagulation. The most common causes are crush injury, overexertion, alcohol abuse, certain medicines, and toxic substances. A number of electrolyte abnormalities and endocrinopathies, including hypothyroidism, thyrotoxicosis, diabetic ketoacidosis, nonketotic hyperosmolar state, and hyperaldosteronism, cause rhabdomyolysis. Rhabdomyolysis and acute renal failure are unusual manifestations of pheochromocytoma. There are a few case reports with pheochromocytoma presenting rhabdomyolysis and acute renal failure. Herein, we report a case with pheochromocytoma crisis presenting with rhabdomyolysis and acute renal failure.
Predictive modeling for corrective maintenance of imaging devices from machine logs.
Patil, Ravindra B; Patil, Meru A; Ravi, Vidya; Naik, Sarif
2017-07-01
In the cost sensitive healthcare industry, an unplanned downtime of diagnostic and therapy imaging devices can be a burden on the financials of both the hospitals as well as the original equipment manufacturers (OEMs). In the current era of connectivity, it is easier to get these devices connected to a standard monitoring station. Once the system is connected, OEMs can monitor the health of these devices remotely and take corrective actions by providing preventive maintenance thereby avoiding major unplanned downtime. In this article, we present an overall methodology of predicting failure of these devices well before customer experiences it. We use data-driven approach based on machine learning to predict failures in turn resulting in reduced machine downtime, improved customer satisfaction and cost savings for the OEMs. One of the use-case of predicting component failure of PHILIPS iXR system is explained in this article.
An evaluation of a real-time fault diagnosis expert system for aircraft applications
NASA Technical Reports Server (NTRS)
Schutte, Paul C.; Abbott, Kathy H.; Palmer, Michael T.; Ricks, Wendell R.
1987-01-01
A fault monitoring and diagnosis expert system called Faultfinder was conceived and developed to detect and diagnose in-flight failures in an aircraft. Faultfinder is an automated intelligent aid whose purpose is to assist the flight crew in fault monitoring, fault diagnosis, and recovery planning. The present implementation of this concept performs monitoring and diagnosis for a generic aircraft's propulsion and hydraulic subsystems. This implementation is capable of detecting and diagnosing failures of known and unknown (i.e., unforseeable) type in a real-time environment. Faultfinder uses both rule-based and model-based reasoning strategies which operate on causal, temporal, and qualitative information. A preliminary evaluation is made of the diagnostic concepts implemented in Faultfinder. The evaluation used actual aircraft accident and incident cases which were simulated to assess the effectiveness of Faultfinder in detecting and diagnosing failures. Results of this evaluation, together with the description of the current Faultfinder implementation, are presented.
14 CFR 152.109 - Project eligibility: Airport planning.
Code of Federal Regulations, 2010 CFR
2010-01-01
...; and (5) In the case of a proposed project for airport master planning in a large or medium air traffic hub, in the opinion of the Administrator— (i) There is an appropriate system plan identifying the need for the airport; (ii) The absence of a system plan is due to the failure of the responsible planning...
ERIC Educational Resources Information Center
Recio, R. Vazquez; Diaz, J. Ojeda
2010-01-01
The article explores the Social Guarantee Programmes, one measure at attending to diversity within the Spanish educational system. It is an alternative measure that aims to break away from the organisational structure of Obligatory Secondary Education, seeking an organisational model and educational strategies that pursue satisfactory results…
Oral purpura as the first manifestation of primary systemic amyloidosis.
McCormick, Robert Stuart; Sloan, Philip; Farr, David; Carrozzo, Marco
2016-07-01
Oral blood blisters and purpura are rare features of primary systemic amyloidosis (amyloid light-chain (AL) amyloidosis). We report a case in which these unusual presentations led to a diagnosis of amyloidosis, which enabled effective treatment before organ failure. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Multiorgan failure following mass wasp stings.
Lin, Cheng-Jui; Wu, Chih-Jen; Chen, Han-Hsiang; Lin, Hsin-Chang
2011-05-01
Wasp bites usually bring temporary discomfort and pain, but on occasion, they can cause serious infections and fatal allergic reactions. We report on a patient who experienced massive wasp stings and developed multiple organ failure, including acute kidney, hepatic failure, and circulatory collapse 4 days later. He was treated with aggressive fluid resuscitation, inotropic agent, intravenous injection of steroids, broad-spectrum antibiotics, and hemodialysis. After intensive treatment, his liver function recovered one month later. Recovery of renal function was delayed, and the patient needed temporary regular hemodialysis. The pathology of kidney biopsy showed acute tubulointerstitial nephritis. This case shows that toxic reactions following massive wasp attacks may happen several days after the fact and result in severe, multiorgan system dysfunction.
NASA Astrophysics Data System (ADS)
Iskandar, I.
2018-03-01
The exponential distribution is the most widely used reliability analysis. This distribution is very suitable for representing the lengths of life of many cases and is available in a simple statistical form. The characteristic of this distribution is a constant hazard rate. The exponential distribution is the lower rank of the Weibull distributions. In this paper our effort is to introduce the basic notions that constitute an exponential competing risks model in reliability analysis using Bayesian analysis approach and presenting their analytic methods. The cases are limited to the models with independent causes of failure. A non-informative prior distribution is used in our analysis. This model describes the likelihood function and follows with the description of the posterior function and the estimations of the point, interval, hazard function, and reliability. The net probability of failure if only one specific risk is present, crude probability of failure due to a specific risk in the presence of other causes, and partial crude probabilities are also included.
Effectiveness of back-to-back testing
NASA Technical Reports Server (NTRS)
Vouk, Mladen A.; Mcallister, David F.; Eckhardt, David E.; Caglayan, Alper; Kelly, John P. J.
1987-01-01
Three models of back-to-back testing processes are described. Two models treat the case where there is no intercomponent failure dependence. The third model describes the more realistic case where there is correlation among the failure probabilities of the functionally equivalent components. The theory indicates that back-to-back testing can, under the right conditions, provide a considerable gain in software reliability. The models are used to analyze the data obtained in a fault-tolerant software experiment. It is shown that the expected gain is indeed achieved, and exceeded, provided the intercomponent failure dependence is sufficiently small. However, even with the relatively high correlation the use of several functionally equivalent components coupled with back-to-back testing may provide a considerable reliability gain. Implications of this finding are that the multiversion software development is a feasible and cost effective approach to providing highly reliable software components intended for fault-tolerant software systems, on condition that special attention is directed at early detection and elimination of correlated faults.
An adaptive tracking observer for failure-detection systems
NASA Technical Reports Server (NTRS)
Sidar, M.
1982-01-01
The design problem of adaptive observers applied to linear, constant and variable parameters, multi-input, multi-output systems, is considered. It is shown that, in order to keep the observer's (or Kalman filter) false-alarm rate (FAR) under a certain specified value, it is necessary to have an acceptable proper matching between the observer (or KF) model and the system parameters. An adaptive observer algorithm is introduced in order to maintain desired system-observer model matching, despite initial mismatching and/or system parameter variations. Only a properly designed adaptive observer is able to detect abrupt changes in the system (actuator, sensor failures, etc.) with adequate reliability and FAR. Conditions for convergence for the adaptive process were obtained, leading to a simple adaptive law (algorithm) with the possibility of an a priori choice of fixed adaptive gains. Simulation results show good tracking performance with small observer output errors and accurate and fast parameter identification, in both deterministic and stochastic cases.
Cvijić, Marta; Zižek, David; Antolič, Bor; Zupan, Igor
2013-01-01
The intrathoracic impedance monitor system measures impedance between the device case and the right ventricular coil and reflects intrathoracic fluid status. It is used to detect early volume overload in patients with chronic heart failure. We report a case of inappropriate activation of the intrathoracic impedance monitor alarm in a patient with epidermoid lung cancer and pleural carcinosis.
Al-Sharafi, Butheinah A; Al-Imad, Shafiq A; Shamshair, Amani M; Al-Faqeeh, Derhim H
2014-10-08
Celiac disease is a systemic immune mediated disease which usually presents with gastrointestinal symptoms, but it may present with extra gastrointestinal manifestations such as metabolic bone disease and failure to thrive. This may lead to a delay in the diagnosis. We present a 13 year old female from the middle east with an 8 year history of severe rickets causing multiple bone deformities leaving the child crippled with bowing of both of her arms and legs. The patient was also found to have growth failure, anemia and on further workup she was found to have celiac disease. We are presenting this case because it shows a severe case of rickets after malabsorption for many years. Celiac disease should be kept in mind as a cause of rickets in patients not responding to usual forms of treatment or when associated with other manifestations of malabsorption.
Hohenstein, Christian; Rupp, Peter; Fleischmann, Thomas
2011-02-01
We wanted to identify incidents that led or could have led to patient harm during prehospital cardiopulmonary resuscitation. A nationwide anonymous and Internet-based critical incident reporting system gave the data. During a 4-year period we received 548 reports of which 74 occurred during cardiopulmonary resuscitation. Human error was responsible for 85% of the incidents, whereas equipment failure contributed to 15% of the reports. Equipment failure was considered to be preventable in 61% of all the cases, whereas incidents because of human error could have been prevented in almost all the cases. In most cases, prevention can be accomplished by simple strategies with the Poka-Yoke technique. Insufficient training of emergency medical service physicians in Germany requires special attention. The critical incident reports raise concerns regarding the level of expertize provided by emergency medical service doctors.
Lassnig, Elisabeth; Dinkhauser, Patrick; Maurer, Edwin; Eber, Bernd
2014-08-01
Heat stroke is a life-threatening condition due to an acute thermoregulatory failure during exposure to high environmental temperatures. We report a series of four cases (three exertional, one classic heat stroke) during the heat wave of July 2013 in Austria. All of them presented with a core temperature > 41 °C, central nervous dysfunction, acute respiratory and renal failure, disseminated intravascular coagulation, rhabdomyolysis, and severe electrocardiographic changes, two cases even mimicking ST-elevation myocardial infarction. The patients were cooled to normal temperature with the "Arctic sun" external cooling system within hours. Electrocardiographic changes resolved quickly. All patients primarily recovered from multiple organ dysfunction and could be discharged from intensive care unit. Unfortunately, the two elder patients died 1 week and 5 weeks later because of late complications.
Incorporating feminist theory and insights into a restorative justice response to sex offenses.
Hopkins, C Quince; Koss, Mary P
2005-05-01
Sex offenses, particularly nonpenetration sex offenses and acquaintance sexual assault, are all too common. Because these crimes reinforce women's fear of crime and restrict spatial and social freedom, it is paramount for the justice system to act affirmatively; however, it does not. This article identifies several failures in the current response to these sex offenses. We describe the research demonstration project, RESTORE, operating in Pima County, Arizona, which uses a restorative justice response as a way of remedying some of those failures. Identifying central feminist insights that guided the development of that project, the article addresses concerns raised by feminists about the use of restorative justice for gendered violence. We conclude that most if not all of these concerns apply to cases of on going domestic violence--cases specifically excluded from the RESTORE program--rather than to cases of acquaintance sexual assault or nonpenetration sex offenses.
2016-12-01
December 2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE A STUDY ON THE FAILURE OF CONVENTIONAL DETERRENCE: THE CASE ...Approved for public release. Distribution is unlimited A STUDY ON THE FAILURE OF CONVENTIONAL DETERRENCE: THE CASE STUDY OF THE BOMBARDMENT OF...necessary to analyze these diverse elements comprehensively. E. RESEARCH DESIGN This thesis focuses on a single case study about the bombardment of
Alongi, Filippo; Schipani, Stefano; Samanes Gajate, Ana Maria; Rosso, Alberto; Cozzarini, Cesare; Fiorino, Claudio; Alongi, Pierpaolo; Picchio, Maria; Gianolli, Luigi; Messa, Cristina; Di Muzio, Nadia
2010-01-01
[11C]choline positron emission tomograhy can be useful to detect metastatic disease and to localize isolated lymph node relapse after primary treatment in case of prostate-specific antigen failure. In case of lymph node failure in prostate cancer patients, surgery or radiotherapy can be proposed with a curative intent. Some reports have suggested that radiotherapy could have a role in local control of oligometastatic lymph node disease. This is the first reported case of [11C]choline positron emission tomography-guided helical tomotherapy concomitant with estramustine for the treatment of pelvic-recurrent prostate cancer. At 24 months after the end of helical tomotherapy, prostate-specific antigen was undetectable and no late toxicities were recorded. A disease-free survival of 24 months, in the absence of any type of systemic therapy, is uncommon in metastatic prostate cancer. The therapeutic approach of the case report is discussed and a literature review on the issue is presented.
Vaughan, Gilberto; Forbi, Joseph C; Xia, Guo-Liang; Fonseca-Ford, Maureen; Vazquez, Roberto; Khudyakov, Yury E; Montiel, Sonia; Waterman, Steve; Alpuche, Celia; Gonçalves Rossi, Livia Maria; Luna, Norma
2014-02-01
Clinical infection by hepatitis A virus (HAV) is generally self-limited but in some cases can progress to liver failure. Here, an HAV outbreak investigation among children with acute liver failure in a highly endemic country is presented. In addition, a sensitive method for HAV whole genome amplification and sequencing suitable for analysis of clinical samples is described. In this setting, two fatal cases attributed to acute liver failure and two asymptomatic cases living in the same household were identified. In a second household, one HAV case was observed with jaundice which resolved spontaneously. Partial molecular characterization showed that both households were infected by HAV subtype IA; however, the infecting strains in the two households were different. The HAV outbreak strains recovered from all cases grouped together within cluster IA1, which contains closely related HAV strains from the United States commonly associated with international travelers. Full-genome HAV sequences obtained from the household with the acute liver failure cases were related (genetic distances ranging from 0.01% to 0.04%), indicating a common-source infection. Interestingly, the strain recovered from the asymptomatic household contact was nearly identical to the strain causing acute liver failure. The whole genome sequence from the case in the second household was distinctly different from the strains associated with acute liver failure. Thus, infection with almost identical HAV strains resulted in drastically different clinical outcomes. © 2013 Wiley Periodicals, Inc.
Sparke, Claire; Moon, Lynelle; Green, Frances; Mathew, Tim; Cass, Alan; Chadban, Steve; Chapman, Jeremy; Hoy, Wendy; McDonald, Stephen
2013-03-01
To date, incidence data for kidney failure in Australia have been available for only those who start renal replacement therapy (RRT). Information about the total incidence of kidney failure, including non-RRT-treated cases, is important to help understand the burden of kidney failure in the community and the characteristics of patients who die without receiving treatment. Data linkage study of national observational data sets. All incident treated cases recorded in the Australia and New Zealand Dialysis and Transplant Registry (ANZDATA) probabilistically linked to incident untreated kidney failure cases derived from national death registration data for 2003-2007. Age, sex, and year. Kidney failure, a combination of incident RRT or death attributed to kidney failure (without RRT). Total incidence of kidney failure (treated and untreated) and treatment rates. There were 21,370 incident cases of kidney failure in 2003-2007. The incidence rate was 20.9/100,000 population (95% CI, 18.3-24.0) and was significantly higher among older people and males (26.1/100,000 population; 95% CI, 22.5-30.0) compared with females (17.0/100,000 population; 95% CI, 14.9-19.2). There were similars number of treated (10,949) and untreated (10,421) cases, but treatment rates were influenced highly by age. More than 90% of cases in all age groups between 5 and 60 years were treated, but this percentage decreased sharply for older people; only 4% of cases in persons 85 years or older were treated (ORs for no treatment of 115 [95% CI, 118-204] for men ≥80 years and 400 [95% CI, 301-531] for women ≥80 years compared with women who were <50 years). Cross-sectional design, reliance on accurate coding of kidney failure in death registration data. Almost all Australians who develop kidney failure at younger than 60 years receive RRT, but treatment rates decrease substantially above that age. Copyright © 2013 National Kidney Foundation, Inc. All rights reserved.
A case of adverse drug reaction induced by dispensing error.
Gallelli, L; Staltari, O; Palleria, C; Di Mizio, G; De Sarro, G; Caroleo, B
2012-11-01
To report about a case of acute renal failure due to absence of communication between physician and patient. A 78 year old man with human immunodeficiency virus (HIV) accessed our hospital and was brought to our attention in August 2011 for severe renal failure. Clinical history revealed that he had been taking highly active antiretroviral therapy with lamivudine/abacavir and fosamprenavir since 2006. In April 2011 due to an augmentation in creatinine plasma levels, a reduction in lamivudine dosage to 100 mg/day and the prescription of abacavir 300 mg/day became necessary. Unfortunately, the patient took both lamivudine and abacavir therefore the association of the two medications (lamivudine/abacavir) lead to asthenia and acute renal failure within a few days. This case emphasizes the importance about how physicians must pay very careful attention during drug prescription, most particularly, as far as elderly patients are concerned. In fact, communication improvement between physicians and patients can prevent increase of adverse drug reactions related to drug dispensing, with consequential reduction of costs in the healthcare system. Copyright © 2012 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.
IT Governance in SMEs: Trust or Control?
NASA Astrophysics Data System (ADS)
Devos, Jan; van Landeghem, Hendrik; Deschoolmeester, Dirk
It is believed by many scholars that a small and medium-sized enterprise (SME) cannot be seen through the lens of a large firm. Theories which explain IT governance in large organizations and methodologies used by practitioners can therefore not be extrapolated to SMEs, which have a completely different economic, cultural and managerial environment. SMEs suffer from resource poverty, have less IS experience and need more external support. SMEs largely contribute to the failure of many IS projects. We define an outsourced information system failure (OISF) as a failure of IT governance in an SME environment and propose a structure for stating propositions derived from both agency theory and theory of trust. The theoretical question addressed in this paper is: how and why do OISFs occur in SMEs? We have chosen a qualitative and positivistic IS case study research strategy based on multiple cases. Eight cases of IS projects were selected. We found that trust is more important than control issues like output-based contracts and structured controls for eliminating opportunistic behaviour in SMEs. We conclude that the world of SMEs is significantly different from that of large companies. This necessitates extra care to be taken on the part of researchers and practitioners when designing artefacts for SMEs.
... store Donate Now Give Monthly Give In Honor Kidney Failure (ESRD) Causes, Symptoms, & Treatments www.kidneyfund.org > ... Disaster preparedness Kidney failure/ESRD diet What causes kidney failure? In most cases, kidney failure is caused ...
[What is the cause of failure of local anesthesia?].
Vinckier, F
2000-01-01
Local anesthesia fails in 10% of cases of inferior alveolar nerve block and 7% of all cases of local anesthesia in general practice. Possible causes of failure are infection, wrong selection of local anesthetic solution, technical mistakes, anatomical variations with accessory innervation and anxiety of the patient. In this publication we discuss reasons for frequent failure in case of infection and in inferior alveolar nerve block. Understanding the mechanism of failure in local anesthesia, makes it possible to formulate guidelines to guarantee success. These measures are discussed in detail.
Eguchi, Kazuo; Kasahara, Kentaro; Nagashima, Akinori; Mor, Tadashi; Nii, Takanobu; Ibaraki, Kazuo; Kario, Kazuomi; Shimada, Kazuyuki
2002-05-01
We report two cases of malignant hypertension with reversible diffuse leukoencephalopathy demonstrating a nocturnal blood pressure (BP) rising pattern ("riser" pattern). Case 1 was a 54-year-old man diagnosed with malignant hypertension who presented with diffuse leukoencephalopathy and nocturnal BP rise during the acute phase. These abnormal findings diminished after treatment of hypertension. Case 2 was a 50-year-old woman diagnosed with malignant hypertension in association with leukoencephalopathy, heart failure and acute renal failure. She also presented with a "riser" pattern during the acute phase. In contrast to case 1, the leukoencephalopathy and "riser" pattern in case 2 were not improved even after 1 month of treatment. Following intensive antihypertensive treatment, renal failure was improved in case 1, but renal failure was not improved after 1 month in case 2. In conclusion, a possible explanation of this phenomenon is that a causative volume overload due to renal dysfunction produced the temporal leukoencephalopathy-like brain edema and "riser" pattern in these cases.
Conceptual modeling of coincident failures in multiversion software
NASA Technical Reports Server (NTRS)
Littlewood, Bev; Miller, Douglas R.
1989-01-01
Recent work by Eckhardt and Lee (1985) shows that independently developed program versions fail dependently (specifically, simultaneous failure of several is greater than would be the case under true independence). The present authors show there is a precise duality between input choice and program choice in this model and consider a generalization in which different versions can be developed using diverse methodologies. The use of diverse methodologies is shown to decrease the probability of the simultaneous failure of several versions. Indeed, it is theoretically possible to obtain versions which exhibit better than independent failure behavior. The authors try to formalize the notion of methodological diversity by considering the sequence of decision outcomes that constitute a methodology. They show that diversity of decision implies likely diversity of behavior for the different verions developed under such forced diversity. For certain one-out-of-n systems the authors obtain an optimal method for allocating diversity between versions. For two-out-of-three systems there seem to be no simple optimality results which do not depend on constraints which cannot be verified in practice.
2009-01-01
The European Directive 98/79/EC on in vitro diagnostic medical devices (IVD) stipulates the marketing and post market surveillance of IVD in the European Economic Area. In cases of issues and field corrective actions, the manufacturers have to inform the responsible Competent Authorities (CA). In Germany, the Federal Institute for Drugs and Medical Devices (BfArM) is the responsible CA for most IVD, with a small subset of IVD for immune hematological and infectiological testing as well as tissue typing as specified in Annex II of the Directive, being within the responsibility of the Paul-Ehrlich-Institute (PEI). In this study, all issues regarding laboratory analyzers for infection testing and their consumables, but not reagents, kits and general culture media, reported to the BfArM between begin 1999 and end of 2007 were analyzed in respect to the sources of report, the underlying product failure and the performed corrective actions. Within the observation period a total of 1471 reports for IVD were received of which 73 related to the IVD for infection testing were included in our study. Reports were predominantly received from manufacturers (56) and competent authorities (15). Affected products were most frequently those for immunological analysis (42) whereas those based on culturing techniques (17) and molecular biological techniques (14) played only minor roles. In all these groups, laboratory analyzers (55) were more frequently affected than their consumables (18). Investigations of the manufacturers were able to identify the underlying root causes of product failures in 62 cases (84.9%). In 2 cases (2.7%) the root cause remained unclear and in 9 cases (12.3%) a product failure was excluded or a user error was the underlying cause. Product failures in laboratory analyzers were most frequently caused by software errors (31) and constructional faults (8) whereas the predominant cause of product failure in consumables were errors in production and quality control (8). Manufacturers issued corrective measures in 66 cases (90.4%) from which 49 and 17 were related to laboratory analyzers and their consumables, respectively. Based on the underlying root causes of product failures these were predominantly customer information (48), recalls (40), software-updates (30) and design changes (9) in the product group of laboratory analyzers as well as customer information (16), recalls (12) and modifications of production and quality management (11) in the group of consumables. The results and experiences obtained since 1999 suggest that the system for post marketing surveillance of IVD is an established tool to ensure product safety, even though the current system can be further enhanced. PMID:20156760
Parvovirus B19 induced hepatic failure in an adult requiring liver transplantation
Krygier, Darin S; Steinbrecher, Urs P; Petric, Martin; Erb, Siegfried R; Chung, Stephen W; Scudamore, Charles H; Buczkowski, Andrzej K; Yoshida, Eric M
2009-01-01
Parvovirus B19 induced acute hepatitis and hepatic failure have been previously reported, mainly in children. Very few cases of parvovirus induced hepatic failure have been reported in adults and fewer still have required liver transplantation. We report the case of a 55-year-old immunocompetent woman who developed fulminant hepatic failure after acute infection with Parvovirus B19 who subsequently underwent orthotopic liver transplantation. This is believed to be the first reported case in the literature in which an adult patient with fulminant hepatic failure associated with acute parvovirus B19 infection and without hematologic abnormalities has been identified prior to undergoing liver transplantation. This case suggests that Parvovirus B19 induced liver disease can affect adults, can occur in the absence of hematologic abnormalities and can be severe enough to require liver transplantation. PMID:19705505
CRANS - CONFIGURABLE REAL-TIME ANALYSIS SYSTEM
NASA Technical Reports Server (NTRS)
Mccluney, K.
1994-01-01
In a real-time environment, the results of changes or failures in a complex, interconnected system need evaluation quickly. Tabulations showing the effects of changes and/or failures of a given item in the system are generally only useful for a single input, and only with regard to that item. Subsequent changes become harder to evaluate as combinations of failures produce a cascade effect. When confronted by multiple indicated failures in the system, it becomes necessary to determine a single cause. In this case, failure tables are not very helpful. CRANS, the Configurable Real-time ANalysis System, can interpret a logic tree, constructed by the user, describing a complex system and determine the effects of changes and failures in it. Items in the tree are related to each other by Boolean operators. The user is then able to change the state of these items (ON/OFF FAILED/UNFAILED). The program then evaluates the logic tree based on these changes and determines any resultant changes to other items in the tree. CRANS can also search for a common cause for multiple item failures, and allow the user to explore the logic tree from within the program. A "help" mode and a reference check provide the user with a means of exploring an item's underlying logic from within the program. A commonality check determines single point failures for an item or group of items. Output is in the form of a user-defined matrix or matrices of colored boxes, each box representing an item or set of items from the logic tree. Input is via mouse selection of the matrix boxes, using the mouse buttons to toggle the state of the item. CRANS is written in C-language and requires the MIT X Window System, Version 11 Revision 4 or Revision 5. It requires 78K of RAM for execution and a three button mouse. It has been successfully implemented on Sun4 workstations running SunOS, HP9000 workstations running HP-UX, and DECstations running ULTRIX. No executable is provided on the distribution medium; however, a sample makefile is included. Sample input files are also included. The standard distribution medium is a .25 inch streaming magnetic tape cartridge (Sun QIC-24) in UNIX tar format. Alternate distribution media and formats are available upon request. This program was developed in 1992.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Burgess, Robert M.; Post, Matthew B.; Buttner, William J.
Pressure relief devices (PRDs ) are used to protect high pressure systems from burst failure caused by overpressurization. Codes and standards require the use of PRDs for the safe design of many pressurized systems. These systems require high reliability due to the risks associated with a burst failure. Hydrogen service can increase the risk of PRD failure due to material property degradation caused by hydrogen attack. The National Renewable Energy Laboratory (NREL) has conducted an accelerated life test on a conventional spring loaded PRD. Based on previous failures in the field, the nozzles specific to these PRDs are of particularmore » interest. A nozzle in a PRD is a small part that directs the flow of fluid toward the sealing surface to maintain the open state of the valve once the spring force is overcome. The nozzle in this specific PRD is subjected to the full tensile force of the fluid pressure. These nozzles are made from 440C material, which is a type of hardened steel that is commonly chosen for high pressure applications because of its high strength properties. In a hydrogen environment, however, 440C is considered a worst case material since hydrogen attack results in a loss of almost all ductility and thus 440C is prone to fatigue and material failure. Accordingly, 440C is not recommended for hydrogen service. Conducting an accelerated life test on a PRD with 440C material provides information on necessary and sufficient conditions required to produce crack initiation and failure. The accelerated life test also provides information on other PRD failure modes that are somewhat statistically random in nature.« less
NASA Astrophysics Data System (ADS)
Thionnet, A.; Chou, H. Y.; Bunsell, A.
2015-04-01
The purpose of these three papers is not to just revisit the modelling of unidirectional composites. It is to provide a robust framework based on physical processes that can be used to optimise the design and long term reliability of internally pressurised filament wound structures. The model presented in Part 1 for the case of monotonically loaded unidirectional composites is further developed to consider the effects of the viscoelastic nature of the matrix in determining the kinetics of fibre breaks under slow or sustained loading. It is shown that the relaxation of the matrix around fibre breaks leads to locally increasing loads on neighbouring fibres and in some cases their delayed failure. Although ultimate failure is similar to the elastic case in that clusters of fibre breaks ultimately control composite failure the kinetics of their development varies significantly from the elastic case. Failure loads have been shown to reduce when loading rates are lowered.
Space power system scheduling using an expert system
NASA Technical Reports Server (NTRS)
Bahrami, K. A.; Biefeld, E.; Costello, L.; Klein, J. W.
1986-01-01
A most pressing problem in space exploration is timely spacecraft power system sequence generation, which requires the scheduling of a set of loads given a set of resource constraints. This is particularly important after an anomaly or failure. This paper discusses the power scheduling problem and how the software program, Plan-It, can be used as a consultant for scheduling power system activities. Modeling of power activities, human interface, and two of the many strategies used by Plan-It are discussed. Preliminary results showing the development of a conflict-free sequence from an initial sequence with conflicts is presented. It shows that a 4-day schedule can be generated in a matter of a few minutes, which provides sufficient time in many cases to aid the crew in the replanning of loads and generation use following a failure or anomaly.
Cascades in interdependent flow networks
NASA Astrophysics Data System (ADS)
Scala, Antonio; De Sanctis Lucentini, Pier Giorgio; Caldarelli, Guido; D'Agostino, Gregorio
2016-06-01
In this manuscript, we investigate the abrupt breakdown behavior of coupled distribution grids under load growth. This scenario mimics the ever-increasing customer demand and the foreseen introduction of energy hubs interconnecting the different energy vectors. We extend an analytical model of cascading behavior due to line overloads to the case of interdependent networks and find evidence of first order transitions due to the long-range nature of the flows. Our results indicate that the foreseen increase in the couplings between the grids has two competing effects: on the one hand, it increases the safety region where grids can operate without withstanding systemic failures; on the other hand, it increases the possibility of a joint systems' failure.
Noise effects on the health status in a dynamic failure model for living organisms
NASA Astrophysics Data System (ADS)
Kang, H.; Jo, J.; Choi, M. Y.; Choi, J.; Yoon, B.-G.
2007-03-01
We study internal and external noise effects on the healthy-unhealthy transition and related phenomena in a dynamic failure model for living organisms. It is found that internal noise makes the system weaker, leading to breakdown under smaller stress. The discontinuous healthy-unhealthy transition in a system with global load sharing below a critical point is naturally explained in terms of the bistability for the health status. External noise present in constant stress gives similar results; further, it induces resonance in response to periodic stress, regardless of load transfer. In the case of local load sharing, such periodic stress is revealed more hazardous than the constant stress.
Developing Reliable Life Support for Mars
NASA Technical Reports Server (NTRS)
Jones, Harry W.
2017-01-01
A human mission to Mars will require highly reliable life support systems. Mars life support systems may recycle water and oxygen using systems similar to those on the International Space Station (ISS). However, achieving sufficient reliability is less difficult for ISS than it will be for Mars. If an ISS system has a serious failure, it is possible to provide spare parts, or directly supply water or oxygen, or if necessary bring the crew back to Earth. Life support for Mars must be designed, tested, and improved as needed to achieve high demonstrated reliability. A quantitative reliability goal should be established and used to guide development t. The designers should select reliable components and minimize interface and integration problems. In theory a system can achieve the component-limited reliability, but testing often reveal unexpected failures due to design mistakes or flawed components. Testing should extend long enough to detect any unexpected failure modes and to verify the expected reliability. Iterated redesign and retest may be required to achieve the reliability goal. If the reliability is less than required, it may be improved by providing spare components or redundant systems. The number of spares required to achieve a given reliability goal depends on the component failure rate. If the failure rate is under estimated, the number of spares will be insufficient and the system may fail. If the design is likely to have undiscovered design or component problems, it is advisable to use dissimilar redundancy, even though this multiplies the design and development cost. In the ideal case, a human tended closed system operational test should be conducted to gain confidence in operations, maintenance, and repair. The difficulty in achieving high reliability in unproven complex systems may require the use of simpler, more mature, intrinsically higher reliability systems. The limitations of budget, schedule, and technology may suggest accepting lower and less certain expected reliability. A plan to develop reliable life support is needed to achieve the best possible reliability.
McCarthy, Cormac; Deegan, Alexander P; Garvey, John F; McDonnell, Timothy J
2013-12-17
Sarcoidosis is a multisystem inflammatory disorder of unknown cause which can affect any organ system. Autosomal dominant lysozyme amyloidosis is a very rare form of hereditary amyloidosis. The Arg64 variant is extraordinarily rare with each family showing a particular pattern of organ involvement, however while Sicca syndrome, gastrointestinal involvement and renal failure are common, lymph node involvement is very rare. In this case report we describe the first reported case of sarcoidosis in association with hereditary lysozyme amyloidosis.
Congestive cardiomyopathy and endobronchial granulomas as manifestations of Churg-Strauss syndrome.
Alvarez-Sala, R.; Prados, C.; Armada, E.; Del Arco, A.; Villamor, J.
1995-01-01
Churg-Strauss syndrome is a systemic vasculitis. Its most frequent complications are heart diseases and asthma. Usually, cardiological manifestations are pericarditis, cardiac failure and myocardial infarction. Endobronchial granulomas identified by bronchoscopy are unusual. We present the case of a man with congestive cardiomyopathy and endobronchial granulomas macroscopically visible at bronchoscopy. After a review of medical literature, we found one case of congestive cardiomyopathy and no cases of endobronchial granulomas observed by bronchoscopy associated with Churg-Strauss syndrome. Images Figure PMID:7644400
Revolutionizing Child Welfare with Outcomes Management
Toche-Manley, Linda L.; Dietzen, Laura; Nankin, Jesse; Beigel, Astrid
2013-01-01
Outcomes management technology holds great promise for improving the quality of services provided to youth in the child welfare system. Advantages include better detection of behavioral health and trauma-related issues, early indicators of case progress or risk of failure and program- and system-level learning. Yet organizational barriers to implementation persist. Attention is spent in this paper on addressing these barriers so the use of outcomes management technology becomes a common practice. A model for predicting resiliency is presented, along with case examples demonstrating its potential use for treatment planning and monitoring progress. PMID:23460130
Dines, David M; Gulotta, Lawrence; Craig, Edward V; Dines, Joshua S
Complex glenoid deformities present the most difficult challenges in shoulder arthroplasty. These deformities may be caused by severe degenerative or congenital deformity, posttraumatic anatomy, tumor, or, in most cases, bone loss after glenoid failure in anatomical total shoulder arthroplasty. Methods of treating severe bone loss have included inlay and onlay bone-graft options with augmented fixation and, in severe cases, salvage hemiarthroplasty with limited goal expectations. Unfortunately, none of these methods has provided consistently satisfactory reproducible results. In fact, each has had high rates of failure and complications. Borrowing from hip and knee arthroplasty surgeons' experience in using CAD/CAM (computer-aided design/computer-aided manufacturing) patient-specific implants to fill significant bony defects, Dr. D. M. Dines developed a glenoid vault reconstruction system (VRS) in conjunction with the Comprehensive Shoulder Arthroplasty System (Zimmer Biomet) to treat severe glenoid bone deficiency. The VRS is patient-specific; each case involves making a preoperative plan based on 3-dimensional reconstruction of a 2-dimensional computed tomography scan. The patient-specific implant and instrumentation that are created are used to reconstruct the deformed glenoid in an anatomical position without the need for additional bone graft. In this article, we describe the implant and its indications, technical aspects of production, and surgical technique.
Proximal tibial fractures: early experience using polyaxial locking-plate technology.
Nikolaou, Vassilios S; Tan, Hiang Boon; Haidukewych, George; Kanakaris, Nikolaos; Giannoudis, Peter V
2011-08-01
Between 2004 and 2009, 60 patients with proximal tibial fractures were included in this prospective study. All fractures were treated with the polyaxial locked-plate fixation system (DePuy, Warsaw, IN, USA). Clinical and radiographic data, including fracture pattern, changes in alignment, local and systemic complications, hardware failure and fracture union were analysed. The mean follow-up was 14 (12-36) months. According to the Orthopaedic Trauma Association (OTA) classification, there were five 41-A, 28 41-B and 27 41-C fractures. Fractures were treated percutaneously in 30% of cases. Double-plating was used in 11 cases. All but three fractures progressed to union at a mean of 3.2 (2.5-5) months. There was no evidence of varus collapse as a result of polyaxial screw failure. No plate fractured, and no screw cut out was noted. There was one case of lateral joint collapse (>10°) in a patient with open bicondylar plateau fracture. The mean Knee Society Score at the time of final follow-up was 91 points, and the mean functional score was 89 points. The polyaxial locking-plate system provided stable fixation of extra-articular and intra-articular proximal tibial fractures and good functional outcomes with a low complication rate.
Impact of lightning strikes on hospital functions.
Mortelmans, Luc J M; Van Springel, Gert L J; Van Boxstael, Sam; Herrijgers, Jan; Hoflacks, Stefaan
2009-01-01
Two regional hospitals were struck by lightning during a one-month period. The first hospital, which had 236 beds, suffered a direct strike to the building. This resulted in a direct spread of the power peak and temporary failure of the standard power supply. The principle problems, after restoring standard power supply, were with the fire alarm system and peripheral network connections in the digital radiology systems. No direct impact on the hardware could be found. Restarting the servers resolved all problems. The second hospital, which had 436 beds, had a lightning strike on the premises and mainly experienced problems due to induction. All affected installations had a cable connection from outside in one way or another. The power supplies never were endangered. The main problem was the failure of different communication systems (telephone, radio, intercom, fire alarm system). Also, the electronic entrance control went out. During the days after the lightening strike, multiple software problems became apparent, as well as failures of the network connections controlling the technical support systems. There are very few ways to prepare for induction problems. The use of fiber-optic networks can limit damage. To the knowledge of the authors, these are the first cases of lightning striking hospitals in medical literature.
Stanton, Neville A; Harvey, Catherine
2017-02-01
Risk assessments in Sociotechnical Systems (STS) tend to be based on error taxonomies, yet the term 'human error' does not sit easily with STS theories and concepts. A new break-link approach was proposed as an alternative risk assessment paradigm to reveal the effect of information communication failures between agents and tasks on the entire STS. A case study of the training of a Royal Navy crew detecting a low flying Hawk (simulating a sea-skimming missile) is presented using EAST to model the Hawk-Frigate STS in terms of social, information and task networks. By breaking 19 social links and 12 task links, 137 potential risks were identified. Discoveries included revealing the effect of risk moving around the system; reducing the risks to the Hawk increased the risks to the Frigate. Future research should examine the effects of compounded information communication failures on STS performance. Practitioner Summary: The paper presents a step-by-step walk-through of EAST to show how it can be used for risk assessment in sociotechnical systems. The 'broken-links' method takes a systemic, rather than taxonomic, approach to identify information communication failures in social and task networks.
Preliminary calculations related to the accident at Three Mile Island
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kirchner, W.L.; Stevenson, M.G.
This report discusses preliminary studies of the Three Mile Island Unit 2 (TMI-2) accident based on available methods and data. The work reported includes: (1) a TRAC base case calculation out to 3 hours into the accident sequence; (2) TRAC parametric calculations, these are the same as the base case except for a single hypothetical change in the system conditions, such as assuming the high pressure injection (HPI) system operated as designed rather than as in the accident; (3) fuel rod cladding failure, cladding oxidation due to zirconium metal-steam reactions, hydrogen release due to cladding oxidation, cladding ballooning, cladding embrittlement,more » and subsequent cladding breakup estimates based on TRAC calculated cladding temperatures and system pressures. Some conclusions of this work are: the TRAC base case accident calculation agrees very well with known system conditions to nearly 3 hours into the accident; the parametric calculations indicate that, loss-of-core cooling was most influenced by the throttling of High-Pressure Injection (HPI) flows, given the accident initiating events and the pressurizer electromagnetic-operated valve (EMOV) failing to close as designed; failure of nearly all the rods and gaseous fission product gas release from the failed rods is predicted to have occurred at about 2 hours and 30 minutes; cladding oxidation (zirconium-steam reaction) up to 3 hours resulted in the production of approximately 40 kilograms of hydrogen.« less
Graft survival of diabetic versus nondiabetic donor tissue after initial keratoplasty.
Vislisel, Jesse M; Liaboe, Chase A; Wagoner, Michael D; Goins, Kenneth M; Sutphin, John E; Schmidt, Gregory A; Zimmerman, M Bridget; Greiner, Mark A
2015-04-01
To compare corneal graft survival using tissue from diabetic and nondiabetic donors in patients undergoing initial Descemet stripping automated endothelial keratoplasty (DSAEK) or penetrating keratoplasty (PKP). A retrospective chart review of pseudophakic eyes that underwent DSAEK or PKP was performed. The primary outcome measure was graft failure. Cox proportional hazard regression and Kaplan-Meier survival analyses were used to compare diabetic versus nondiabetic donor tissue for all keratoplasty cases. A total of 183 eyes (136 DSAEK, 47 PKP) were included in the statistical analysis. Among 24 procedures performed using diabetic donor tissue, there were 4 cases (16.7%) of graft failure (3 DSAEK, 1 PKP), and among 159 procedures performed using nondiabetic donor tissue, there were 18 cases (11.3%) of graft failure (12 DSAEK, 6 PKP). Cox proportional hazard ratio of graft failure for all cases comparing diabetic with nondiabetic donor tissue was 1.69, but this difference was not statistically significant (95% confidence interval, 0.56-5.06; P = 0.348). There were no significant differences in Kaplan-Meier curves comparing diabetic with nondiabetic donor tissue for all cases (P = 0.380). Statistical analysis of graft failure by donor diabetes status within each procedure type was not possible because of the small number of graft failure events involving diabetic tissue. We found similar rates of graft failure in all keratoplasty cases when comparing tissue from diabetic and nondiabetic donors, but further investigation is needed to determine whether diabetic donor tissue results in different graft failure rates after DSAEK compared with PKP.
A risk-based approach to sanitary sewer pipe asset management.
Baah, Kelly; Dubey, Brajesh; Harvey, Richard; McBean, Edward
2015-02-01
Wastewater collection systems are an important component of proper management of wastewater to prevent environmental and human health implications from mismanagement of anthropogenic waste. Due to aging and inadequate asset management practices, the wastewater collection assets of many cities around the globe are in a state of rapid decline and in need of urgent attention. Risk management is a tool which can help prioritize resources to better manage and rehabilitate wastewater collection systems. In this study, a risk matrix and a weighted sum multi-criteria decision-matrix are used to assess the consequence and risk of sewer pipe failure for a mid-sized city, using ArcGIS. The methodology shows that six percent of the uninspected sewer pipe assets of the case study have a high consequence of failure while four percent of the assets have a high risk of failure and hence provide priorities for inspection. A map incorporating risk of sewer pipe failure and consequence is developed to facilitate future planning, rehabilitation and maintenance programs. The consequence of failure assessment also includes a novel failure impact factor which captures the effect of structurally defective stormwater pipes on the failure assessment. The methodology recommended in this study can serve as a basis for future planning and decision making and has the potential to be universally applied by municipal sewer pipe asset managers globally to effectively manage the sanitary sewer pipe infrastructure within their jurisdiction. Copyright © 2014 Elsevier B.V. All rights reserved.
Real-time automated failure identification in the Control Center Complex (CCC)
NASA Technical Reports Server (NTRS)
Kirby, Sarah; Lauritsen, Janet; Pack, Ginger; Ha, Anhhoang; Jowers, Steven; Mcnenny, Robert; Truong, The; Dell, James
1993-01-01
A system which will provide real-time failure management support to the Space Station Freedom program is described. The system's use of a simplified form of model based reasoning qualifies it as an advanced automation system. However, it differs from most such systems in that it was designed from the outset to meet two sets of requirements. First, it must provide a useful increment to the fault management capabilities of the Johnson Space Center (JSC) Control Center Complex (CCC) Fault Detection Management system. Second, it must satisfy CCC operational environment constraints such as cost, computer resource requirements, verification, and validation, etc. The need to meet both requirement sets presents a much greater design challenge than would have been the case had functionality been the sole design consideration. The choice of technology, discussing aspects of that choice and the process for migrating it into the control center is overviewed.
The computer integrated documentation project: A merge of hypermedia and AI techniques
NASA Technical Reports Server (NTRS)
Mathe, Nathalie; Boy, Guy
1993-01-01
To generate intelligent indexing that allows context-sensitive information retrieval, a system must be able to acquire knowledge directly through interaction with users. In this paper, we present the architecture for CID (Computer Integrated Documentation). CID is a system that enables integration of various technical documents in a hypertext framework and includes an intelligent browsing system that incorporates indexing in context. CID's knowledge-based indexing mechanism allows case based knowledge acquisition by experimentation. It utilizes on-line user information requirements and suggestions either to reinforce current indexing in case of success or to generate new knowledge in case of failure. This allows CID's intelligent interface system to provide helpful responses, based on previous experience (user feedback). We describe CID's current capabilities and provide an overview of our plans for extending the system.
Learning from Engineering Failures: A Case Study of the Deepwater Horizon
ERIC Educational Resources Information Center
Rose, Mary Annette; Hunt, Brian
2012-01-01
Natural catastrophes and engineering failures provide timely, motivating, and conceptually rich backdrops for learning. Engineering educators have long embraced case studies of engineering failures as a sound pedagogical strategy for meeting several learning standards, such as "design within realistic constraints", and teaching failure…
[Hyperkalemia-induced failure of pacemaker capture and sensing: a case report].
Wang, Y P; Chen, B X; Su, K J; Sun, L J; Zhang, Y; Guo, L J; Gao, W
2014-12-18
Hyperkalemia may induce serious cardiac arrhythmia, with possible life-threatening effects. It may cause cardiac pacemaker (PMK) malfunctioning due to a reduction of the electronegativity of the resting myocardial potential. We report the case of a 71-year-old woman who had a previous history of chronic heart failure, chronic renal failure and DDI pacemaker. She was admitted for disturbance of consciousness. During hospitalization, she was observed for extreme hypotension, acute hyperkalemia, ventricular escape rhythm, associated with failure of pacemaker capture and sensing. She was treated with calcium chloride injection, followed by insulin/glucose and sodium bicarbonate infusions; the electrocardiogram recordings showed an correction of the PMK malfunctioning and serial improvement of the intraventricular conduction. This case supports that hyperkalemia should be closely monitored in the chronic heart failure patients combined with chronic renal failure.
Collaboration Strategies to Reduce Technical Debt
ERIC Educational Resources Information Center
Miko, Jeffrey Allen
2017-01-01
Inadequate software development collaboration processes can allow technical debt to accumulate increasing future maintenance costs and the chance of system failures. The purpose of this qualitative case study was to explore collaboration strategies software development leaders use to reduce the amount of technical debt created by software…
Management of reliability and maintainability; a disciplined approach to fleet readiness
NASA Technical Reports Server (NTRS)
Willoughby, W. J., Jr.
1981-01-01
Material acquisition fundamentals were reviewed and include: mission profile definition, stress analysis, derating criteria, circuit reliability, failure modes, and worst case analysis. Military system reliability was examined with emphasis on the sparing of equipment. The Navy's organizational strategy for 1980 is presented.
[Assessment of energy metabolism and nutritional supply in children with mechanical ventilation].
Ji, Jian; Qian, Suyun; Yan, Jie
2016-01-01
To determine the resting energy expenditure on mechanical ventilation in pediatric intensive care unit (PICU) by indirect calorimetry, and analyze the distribution of metabolic states. The nutrition supply was assessed according to the resting energy expenditure. An observational study which was held in PICU of Beijing Children's Hospital from November 2013 to April 2014. Critically ill children with mechanical ventilation were enrolled in this study. The inclusion criteria included the following: (1) pediatric critical illness score < 90, or meet the United States PICU admission criteria; (2) age > 29 days, < 18 years old; (3) time of mechanical ventilation > 24 hours; (4) volume of mechanical ventilation > 60 ml. Resting energy expenditure was determined by US Med Graphic Company CCM/D energy metabolism test system. Predictive resting energy expenditure was calculated for each subject with age-appropriate equation (Schofield-HTWT). According to the actual energy intake records and required energy intake (10% higher than the measured value) to define the nutritional status. The selected subjects were grouped according to gender, age, types of disease and nutritional status, and compared the metabolic status and nutritional supply of different groups. Sixty-eight children were enrolled in this study, 46 were boys and 22 were girls, including 25 cases of pneumonia with respiratory failure, 23 cases of central nervous system diseases complicated with respiratory failure and 20 cases of postoperative tracheal intubation. The ratio of boys and girls was 2:1. The results showed 36 patients in a low metabolic state, accounting for 53%, 23 patients in a high metabolic state, accounting for 34% and 9 patients (13%) in the metabolism of the normal state. In the male children, 12 cases (26%) were in the high metabolism and 26 cases (57%) were in the low metabolism, and 8 cases (17%) were in the normal metabolism. In the female children, 11 cases (50%) were classified into high metabolism; 10 cases (45%) into low metabolism and 1 case (5%) was classified into normal metabolism. There was no significant difference in the distribution of metabolic status among different gender(χ(2) = 4.176, P = 0.095). In terms of ages, 15 cases (63%) were mainly in high metabolism in the patients at age < 3 years, 19 and 11 patients in 3-9 and 10-18 years age group respectively are mostly in low metabolism. As to the diseases, pneumonia complicated with respiratory failure and central nervous system diseases complicated with respiratory failure with mechanical ventilation (respectively 15 cases (60%) and 12 cases (52%)) were in low metabolism mainly; 11 cases of postoperative tracheal intubation were in high metabolism states, accounting for 55%. The distribution of metabolic status in different age and clinical diagnosis had significant difference. Thirty-one patients had normal nutrients supply, accounting for 46%, 37 patients had inappropriate nutrition supply, accounting for 54%, including insufficient supplies of nutrients in 22 cases, accounting for 32%, excessive supplies of nutrients were seen in 15 cases(22%). There were no statistically significant differences among the different types of diseases. There are differences in the metabolic state of the mechanical ventilation in critically ill patients, mainly in low metabolic state. The age and types of diseases can affect the metabolic status of patients. Empirical nutritional support is not applicable to patients.
Learning from failure in health care: frequent opportunities, pervasive barriers.
Edmondson, A C
2004-12-01
The notion that hospitals and medical practices should learn from failures, both their own and others', has obvious appeal. Yet, healthcare organisations that systematically and effectively learn from the failures that occur in the care delivery process, especially from small mistakes and problems rather than from consequential adverse events, are rare. This article explores pervasive barriers embedded in healthcare's organisational systems that make shared or organisational learning from failure difficult and then recommends strategies for overcoming these barriers to learning from failure, emphasising the critical role of leadership. Firstly, leaders must create a compelling vision that motivates and communicates urgency for change; secondly, leaders must work to create an environment of psychological safety that fosters open reporting, active questioning, and frequent sharing of insights and concerns; and thirdly, case study research on one hospital's organisational learning initiative suggests that leaders can empower and support team learning throughout their organisations as a way of identifying, analysing, and removing hazards that threaten patient safety.
Learning from failure in health care: frequent opportunities, pervasive barriers
Edmondson, A
2004-01-01
The notion that hospitals and medical practices should learn from failures, both their own and others', has obvious appeal. Yet, healthcare organisations that systematically and effectively learn from the failures that occur in the care delivery process, especially from small mistakes and problems rather than from consequential adverse events, are rare. This article explores pervasive barriers embedded in healthcare's organisational systems that make shared or organisational learning from failure difficult and then recommends strategies for overcoming these barriers to learning from failure, emphasising the critical role of leadership. Firstly, leaders must create a compelling vision that motivates and communicates urgency for change; secondly, leaders must work to create an environment of psychological safety that fosters open reporting, active questioning, and frequent sharing of insights and concerns; and thirdly, case study research on one hospital's organisational learning initiative suggests that leaders can empower and support team learning throughout their organisations as a way of identifying, analysing, and removing hazards that threaten patient safety. PMID:15576689
Wilcox, James Allen; Reid Duffy, Pam
2015-01-01
Catatonia is a psychomotor syndrome which has historically been associated with schizophrenia. Many clinicians have thought that the prevalence of this condition has been decreasing over the past few decades. This review reminds clinicians that catatonia is not exclusively associated with schizophrenia, and is still common in clinical practice. Many cases are related to affective disorders or are of an idiopathic nature. The illusion of reduced prevalence has been due to evolving diagnostic systems that failed to capture catatonic syndromes. This systemic error has remained unchallenged, and potentiated by the failure to perform adequate neurological evaluations and catatonia screening exams on psychiatric patients. We find that current data supports catatonic syndromes are still common, often severe and of modern clinical importance. Effective treatment is relatively easy and can greatly reduce organ failure associated with prolonged psychomotor symptoms. Prompt identification and treatment can produce a robust improvement in most cases. The ongoing prevalence of this syndrome requires that psychiatrists recognize catatonia and its presentations, the range of associated etiologies, and the import of timely treatment. PMID:26690229
Progress feedback and the OQ-system: The past and the future.
Lambert, Michael J
2015-12-01
A serious problem in routine clinical practice is clinician optimism about the benefit clients derive from the therapy that they offer compared to measured benefits. The consequence of seeing the silver lining is a failure to identify cases that, in the end, leave treatment worse-off than when they started or are simply unaffected. It has become clear that some methods of measuring, monitoring, and providing feedback to clinicians about client mental health status over the course of routine care improves treatment outcomes for clients at risk of treatment failure (Shimokawa, Lambert, & Smart, 2010) and thus is a remedy for therapist optimism by identifying cases at risk for poor outcomes. The current article presents research findings related to use of the Outcome Questionnaire-45 and Clinical Support Tools for this purpose. The necessary characteristics of feedback systems that work to benefit client's well-being are identified. In addition, suggestions for future research and use in routine care are presented. (c) 2015 APA, all rights reserved).
Erten, Nilgun; Saka, Bulent; Karan, M Akif; Parman, Yesim; Umman, Berrin; Tascioglu, Cemil
2004-04-01
A 34-year-old woman was admitted to our emergency room with a high fever, abdominal pain, dyspnea and confusion. High fever and abdominal pain had first occured after a cystocele operation 5 months earlier. Later, congestive heart failure with mural thrombus formation, peripheral polyneuropathy and ischemic cerebrovascular accident were identified in clinical follow-ups, and multiple arterial and venous thromboses were seen on cranial and abdominal magnetic resonance imaging angiography. The patient's symptoms improved with anticoagulant treatment. Antiphospholipid syndrome with elevated serum anticardiolipin IgG levels was diagnosed, and ischemic peripheral polyneuropathy with axonal degeneration was determined by sural nerve biopsy. In antiphospholipid syndrome, elevated anticardiolipin antibodies appear to be the most common acquired blood protein defect causing thrombosis. Disseminated vascular thrombosis in catastrophic antiphospholipid syndrome can result in multiorgan failure with increased morbidity and mortality. It rarely occurs secondary to various infections as in the case of our patient, who suffered postoperative intraabdominal infection. It is important to note that peripheral nervous system involvement is rare in antiphospholipid syndrome.
[Left-sided native valve endocarditis by coagulase-negative staphylococci: an emerging disease].
Haro, Juan Luis; Lomas, José M; Plata, Antonio; Ruiz, Josefa; Gálvez, Juan; de la Torre, Javier; Hidalgo-Tenorio, Carmen; Reguera, José M; Márquez, Manuel; Martínez-Marcos, Francisco; de Alarcón, Arístides
2008-05-01
To describe the epidemiological, clinical, and prognostic characteristics of patients with left-sided native valve endocarditis (LNVE) caused by coagulase-negative staphylococci (CoNS). Prospective multicenter study of endocarditis cases reported in the Andalusian Cohort for the Study of Cardiovascular Infections between 1984 and 2005. Among 470 cases of LNVE, 39 (8.3%) were caused by CoNS, a number indicating a 30% increase in the incidence of this infection over the last decade. The mean age of affected patients was 58.32 +/- 15 years and 27 (69.2%) were men. Twenty-one patients (53.8%) had previous known valve disease and half the episodes were considered nosocomial (90% of them from vascular procedures). Median time interval from the onset of symptoms to diagnosis was 14 days (range: 1-120). Renal failure (21 cases, 53.8%), intracardiac damage (11 cases, 28.2%), and central nervous system involvement (10 cases, 25.6%) were the most frequent complications. There were only 3 cases (7.7%) of septic shock. Surgery was performed in 18 patients (46.2%). Nine patients (23.1%) died, overall. Factors associated with higher mortality in the univariate analysis were acute renal failure (P = 0.023), left-sided ventricular failure (P = 0.047), and time prior to diagnosis less than 21 days (P = 0.018). As compared to LNVE due to other microorganisms, the patients were older (P = 0.018), had experienced previous nosocomial manipulation as the source of bacteremia (P < 0.001), and developed acute renal failure more frequently (P = 0.001). Mortality of LNVE due to CoNS was lower than mortality in Staphylococcus aureus infection, but higher than in Streptococcus viridans infection. Left-sided native valve endocarditis due to CoNS is now increasing because of the ageing of the population. This implies more frequent invasive procedures (mainly vascular) as a consequence of the concomitant disease. Nonetheless, the mortality associated with LNVE due to CoNS does not seem to be greater than infection caused by other pathogens.
Composite Structural Analysis of Flat-Back Shaped Blade for Multi-MW Class Wind Turbine
NASA Astrophysics Data System (ADS)
Kim, Soo-Hyun; Bang, Hyung-Joon; Shin, Hyung-Ki; Jang, Moon-Seok
2014-06-01
This paper provides an overview of failure mode estimation based on 3D structural finite element (FE) analysis of the flat-back shaped wind turbine blade. Buckling stability, fiber failure (FF), and inter-fiber failure (IFF) analyses were performed to account for delamination or matrix failure of composite materials and to predict the realistic behavior of the entire blade region. Puck's fracture criteria were used for IFF evaluation. Blade design loads applicable to multi-megawatt (MW) wind turbine systems were calculated according to the Germanischer Lloyd (GL) guideline and the International Electrotechnical Commission (IEC) 61400-1 standard, under Class IIA wind conditions. After the post-processing of final load results, a number of principal load cases were selected and converted into applied forces at the each section along the blade's radius of the FE model. Nonlinear static analyses were performed for laminate failure, FF, and IFF check. For buckling stability, linear eigenvalue analysis was performed. As a result, we were able to estimate the failure mode and locate the major weak point.
[Handling the cases of school failure in an educational institute in Zaghouan].
Abdelkafi Koubaa, Afifa; Bouslama, Samira; Bel Abed, Najet; Dahmen, Hayet; Mira Gabsi, Zvine; Gabsi, Abdallah; Ouerfelli, Nabil; Mabaouj, Mohamed Taher; Bachouche, Imen
2011-10-01
To assess the main reasons for the school failure in a school in Zaghouan, how to handle these issues, to evaluate the work of the school social office. A retrospective study included 86 failure cases in a school in Zaghouan, handled by the school social office for three years (2004 - 2007). He have detected the principals causes of school failure, detected by the educational staff or by the listening office. The causes of failure are mainly social (46%) as family problems and low income. These families received financial aids and free treatment cards. Discussions have been made with the parents in order to make them more conscious. The pedagogical reasons (28%) however are usually relationship' problems between the student and his teacher or the student and the administration, the three subjects were informed so that attitudes could be changed in the purpose of helping the student. Twelve students (14%) have a psychological case, depression and over worrying, led in some cases to addiction.These cases were diagnosed and transferred to specialized clinics.Sense and chronic diseases (12%), are considered as health reasons for school failure and caused several absences in the school. The school physicist took care of these cases by handling them medical guidance cards while observing the diagnose progress. As school results, 56 cases turned satisfaisant which is 65 % of all cases. The school failure became a priority of the "School Health" institute. That puss to create the school social program, his aim is protecting the students from all dangers, early school leaving and social disintegration, and delinquency. Thus, all parts must be responsible for the school failure, teachers, parents, students,psychiatrists and physicists, as well as introducing the social school work and listening offices and missions to the parents, students and teachers in order to guarantee the success of the operations.
a Study on Satellite Diagnostic Expert Systems Using Case-Based Approach
NASA Astrophysics Data System (ADS)
Park, Young-Tack; Kim, Jae-Hoon; Park, Hyun-Soo
1997-06-01
Many research works are on going to monitor and diagnose diverse malfunctions of satellite systems as the complexity and number of satellites increase. Currently, many works on monitoring and diagnosis are carried out by human experts but there are needs to automate much of the routine works of them. Hence, it is necessary to study on using expert systems which can assist human experts routine work by doing automatically, thereby allow human experts devote their expertise more critical and important areas of monitoring and diagnosis. In this paper, we are employing artificial intelligence techniques to model human experts' knowledge and inference the constructed knowledge. Especially, case-based approaches are used to construct a knowledge base to model human expert capabilities which use previous typical exemplars. We have designed and implemented a prototype case-based system for diagnosing satellite malfunctions using cases. Our system remembers typical failure cases and diagnoses a current malfunction by indexing the case base. Diverse methods are used to build a more user friendly interface which allows human experts can build a knowledge base in as easy way.
Distributed environmental control
NASA Technical Reports Server (NTRS)
Cleveland, Gary A.
1992-01-01
We present an architecture of distributed, independent control agents designed to work with the Computer Aided System Engineering and Analysis (CASE/A) simulation tool. CASE/A simulates behavior of Environmental Control and Life Support Systems (ECLSS). We describe a lattice of agents capable of distributed sensing and overcoming certain sensor and effector failures. We address how the architecture can achieve the coordinating functions of a hierarchical command structure while maintaining the robustness and flexibility of independent agents. These agents work between the time steps of the CASE/A simulation tool to arrive at command decisions based on the state variables maintained by CASE/A. Control is evaluated according to both effectiveness (e.g., how well temperature was maintained) and resource utilization (the amount of power and materials used).
A R, Subhashree
2014-06-01
Red cell distribution width (RDW) is a red cell measurement given by fully automated hematology analyzers. It is a measure of heterogeneity in the size of circulating erythrocytes. Studies have shown that it is a prognostic marker in non - anemic diabetic patients with symptomatic cardiovascular disease but its correlation with cardiac failure in diabetics has not been studied so far. Moreover, studies have also shown that a higher RDW may reflect an underlying inflammatory state. Since Diabetes is a pro inflammatory state there is a possibility that it might have an influence on the RDW values even when there is no cardiac failure, but research data on this aspect is lacking. B-type natriuretic peptide (BNP) is a proven marker for cardiac failure whose values are comparable with echo cardio graphic findings in assessing the left ventricular dysfunction. This study aimed to find out the correlation between RDW% and serum BNP levels in Diabetics with heart failure (cases) when compared to those without failure (controls). Further, we compared the RDW % values of the cases with controls. Settings and Design : The study was approved by institutional ethical and research committee. A cross-sectional study was conducted with patients attending the Diabetes clinic of a tertiary care hospital in Chennai, India, during the period of October to December 2013. Hundred known cases of type II Diabetes mellitus attending Diabetes centre of the Hospital, with clinical and Echo cardio graphic features of cardiac failure were included as cases. Hundred age and gender matched diabetics with negative history of cardiovascular disease and with normal Echo cardio graphic features were included as controls. Informed consent was obtained from all the cases and controls. Demographic data and clinical history were gathered from all the cases and controls by using a standardized self - administered questionnaire. Biochemical and hematological parameters which included Fasting and Postprandial blood sugar, Glycosylated hemoglobin, Complete Blood count including RDW and serum BNP were performed for all the cases and controls. RESULTS were tabulated and analysed using SPSS 20.0 version A statistically significant correlation (p<.001) was found between Red cell Distribution Width % and Serum B type Natriuretic Peptide values in the cases. Further, RDW% showed a statistically significant difference between cases and controls. RDW% can be used as a screening parameter to identify cardiac failure in Diabetic patients similar to non-diabetic cardiac failure. RDW% values are significantly higher in cases of Diabetes with failure in comparison to uncomplicated Diabetes.
Tokuda, Yasuharu; Kishida, Naoki; Konishi, Ryota; Koizumi, Shunzo
2011-03-01
Cognitive errors in the course of clinical decision-making are prevalent in many cases of medical injury. We used information on verdict's judgment from closed claims files to determine the important cognitive factors associated with cases of medical injury. Data were collected from claims closed between 2001 to 2005 at district courts in Tokyo and Osaka, Japan. In each case, we recorded all the contributory cognitive, systemic, and patient-related factors judged in the verdicts to be causally related to the medical injury. We also analyzed the association between cognitive factors and cases involving paid compensation using a multivariable logistic regression model. Among 274 cases (mean age 49 years old; 45% women), there were 122 (45%) deaths and 67 (24%) major injuries (incomplete recovery within a year). In 103 cases (38%), the verdicts ordered hospitals to pay compensation (median; 8,000,000 Japanese Yen). An error in judgment (199/274, 73%) and failure of vigilance (177/274, 65%) were the most prevalent causative cognitive factors, and error in judgment was also significantly associated with paid compensation (odds ratio, 1.9; 95% confidence interval [CI], 1.0-3.4). Systemic causative factors including poor teamwork (11/274, 4%) and technology failure (5/274, 2%) were less common. The closed claims analysis based on verdict's judgment showed that cognitive errors were common in cases of medical injury, with an error in judgment being most prevalent and closely associated with compensation payment. Reduction of this type of error is required to produce safer healthcare. 2010 Society of Hospital Medicine.
Linear Parameter Varying Control Synthesis for Actuator Failure, Based on Estimated Parameter
NASA Technical Reports Server (NTRS)
Shin, Jong-Yeob; Wu, N. Eva; Belcastro, Christine
2002-01-01
The design of a linear parameter varying (LPV) controller for an aircraft at actuator failure cases is presented. The controller synthesis for actuator failure cases is formulated into linear matrix inequality (LMI) optimizations based on an estimated failure parameter with pre-defined estimation error bounds. The inherent conservatism of an LPV control synthesis methodology is reduced using a scaling factor on the uncertainty block which represents estimated parameter uncertainties. The fault parameter is estimated using the two-stage Kalman filter. The simulation results of the designed LPV controller for a HiMXT (Highly Maneuverable Aircraft Technology) vehicle with the on-line estimator show that the desired performance and robustness objectives are achieved for actuator failure cases.
NASA Astrophysics Data System (ADS)
Manconi, A.; Giordan, D.
2015-02-01
We investigate the use of landslide failure forecast models by exploiting near-real-time monitoring data. Starting from the inverse velocity theory, we analyze landslide surface displacements on different temporal windows, and apply straightforward statistical methods to obtain confidence intervals on the estimated time of failure. Here we describe the main concepts of our method, and show an example of application to a real emergency scenario, the La Saxe rockslide, Aosta Valley region, northern Italy. Based on the herein presented case study, we identify operational thresholds based on the reliability of the forecast models, in order to support the management of early warning systems in the most critical phases of the landslide emergency.
Al-Osail, Aisha M; Al-Zahrani, Ibrahim M; Al-Abdulwahab, Abdullah A; Alhajri, Sarah M; Al-Osail, Emad M; Al-Hwiesh, Abdullah K; Al-Muhanna, Fahad A
2017-09-07
Infective endocarditis is one of the most common infections among intravenous drug addicts. Its complications can affect many systems, and these can include acute renal failure. There is a scarcity of cases in the literature related to acute renal failure secondary to infective endocarditis treated with peritoneal dialysis. In this paper, the case of a 48-year-old Saudi male is reported, who presented with features suggestive of infective endocarditis and who developed acute kidney injury that was treated successfully with high tidal volume automated peritoneal dialysis. To our knowledge, this is the second report of such an association in the literature. A 48-year-old Saudi gentleman diagnosed to have a glucose-6-phosphate dehydrogenase deficiency and hepatitis C infection for the last 9 years, presented to the emergency department with a history of fever of 2 days' duration. On examination: his temperature = 41 °C, there was clubbing of the fingers bilaterally and a pansystolic murmur in the left parasternal area. The results of the blood cultures and echocardiogram were supportive of the diagnosis of infective endocarditis, and the patient subsequently developed acute kidney injury, and his creatinine reached 5.2 mg/dl, a level for which dialysis is essential for the patient to survive. High tidal volume automated peritoneal dialysis is highly effective as a renal replacement therapy in acute renal failure secondary to infective endocarditis if no contraindication is present.
Systemic risk in a unifying framework for cascading processes on networks
NASA Astrophysics Data System (ADS)
Lorenz, J.; Battiston, S.; Schweitzer, F.
2009-10-01
We introduce a general framework for models of cascade and contagion processes on networks, to identify their commonalities and differences. In particular, models of social and financial cascades, as well as the fiber bundle model, the voter model, and models of epidemic spreading are recovered as special cases. To unify their description, we define the net fragility of a node, which is the difference between its fragility and the threshold that determines its failure. Nodes fail if their net fragility grows above zero and their failure increases the fragility of neighbouring nodes, thus possibly triggering a cascade. In this framework, we identify three classes depending on the way the fragility of a node is increased by the failure of a neighbour. At the microscopic level, we illustrate with specific examples how the failure spreading pattern varies with the node triggering the cascade, depending on its position in the network and its degree. At the macroscopic level, systemic risk is measured as the final fraction of failed nodes, X*, and for each of the three classes we derive a recursive equation to compute its value. The phase diagram of X* as a function of the initial conditions, thus allows for a prediction of the systemic risk as well as a comparison of the three different model classes. We could identify which model class leads to a first-order phase transition in systemic risk, i.e. situations where small changes in the initial conditions determine a global failure. Eventually, we generalize our framework to encompass stochastic contagion models. This indicates the potential for further generalizations.
Whellan, David J; Reed, Shelby D; Liao, Lawrence; Gould, Stuart D; O'connor, Christopher M; Schulman, Kevin A
2007-01-15
Although heart failure disease management (HFDM) programs improve patient outcomes, the implementation of these programs has been limited because of financial barriers. We undertook the present study to understand the economic incentives and disincentives for adoption of disease management strategies from the perspectives of a physician (group), a hospital, an integrated health system, and a third-party payer. Using the combined results of a group of randomized controlled trials and a set of financial assumptions from a single academic medical center, a financial model was developed to compute the expected costs before and after the implementation of a HFDM program by 3 provider types (physicians, hospitals, and health systems), as well as the costs incurred from a payer perspective. The base-case model showed that implementation of HFDM results in a net financial loss to all potential providers of HFDM. Implementation of HFDM as described in our base-case analysis would create a net loss of US dollars 179,549 in the first year for a physician practice, US dollars 464,132 for an integrated health system, and US dollars 652,643 in the first year for a hospital. Third-party payers would be able to save US dollars 713,661 annually for the care of 350 patients with heart failure in a HFDM program. In conclusion, although HFDM programs may provide patients with improved clinical outcomes and decreased hospitalizations that save third-party payers money, limited financial incentives are currently in place for healthcare providers and hospitals to initiate these programs.
Fatigue Reliability of Gas Turbine Engine Structures
NASA Technical Reports Server (NTRS)
Cruse, Thomas A.; Mahadevan, Sankaran; Tryon, Robert G.
1997-01-01
The results of an investigation are described for fatigue reliability in engine structures. The description consists of two parts. Part 1 is for method development. Part 2 is a specific case study. In Part 1, the essential concepts and practical approaches to damage tolerance design in the gas turbine industry are summarized. These have evolved over the years in response to flight safety certification requirements. The effect of Non-Destructive Evaluation (NDE) methods on these methods is also reviewed. Assessment methods based on probabilistic fracture mechanics, with regard to both crack initiation and crack growth, are outlined. Limit state modeling techniques from structural reliability theory are shown to be appropriate for application to this problem, for both individual failure mode and system-level assessment. In Part 2, the results of a case study for the high pressure turbine of a turboprop engine are described. The response surface approach is used to construct a fatigue performance function. This performance function is used with the First Order Reliability Method (FORM) to determine the probability of failure and the sensitivity of the fatigue life to the engine parameters for the first stage disk rim of the two stage turbine. A hybrid combination of regression and Monte Carlo simulation is to use incorporate time dependent random variables. System reliability is used to determine the system probability of failure, and the sensitivity of the system fatigue life to the engine parameters of the high pressure turbine. 'ne variation in the primary hot gas and secondary cooling air, the uncertainty of the complex mission loading, and the scatter in the material data are considered.
Management of heart failure in the new era: the role of scores.
Mantegazza, Valentina; Badagliacca, Roberto; Nodari, Savina; Parati, Gianfranco; Lombardi, Carolina; Di Somma, Salvatore; Carluccio, Erberto; Dini, Frank Lloyd; Correale, Michele; Magrì, Damiano; Agostoni, Piergiuseppe
2016-08-01
Heart failure is a widespread syndrome involving several organs, still characterized by high mortality and morbidity, and whose clinical course is heterogeneous and hardly predictable.In this scenario, the assessment of heart failure prognosis represents a fundamental step in clinical practice. A single parameter is always unable to provide a very precise prognosis. Therefore, risk scores based on multiple parameters have been introduced, but their clinical utility is still modest. In this review, we evaluated several prognostic models for acute, right, chronic, and end-stage heart failure based on multiple parameters. In particular, for chronic heart failure we considered risk scores essentially based on clinical evaluation, comorbidities analysis, baroreflex sensitivity, heart rate variability, sleep disorders, laboratory tests, echocardiographic imaging, and cardiopulmonary exercise test parameters. What is at present established is that a single parameter is not sufficient for an accurate prediction of prognosis in heart failure because of the complex nature of the disease. However, none of the scoring systems available is widely used, being in some cases complex, not user-friendly, or based on expensive or not easily available parameters. We believe that multiparametric scores for risk assessment in heart failure are promising but their widespread use needs to be experienced.
Application of Single Crystal Failure Criteria: Theory and Turbine Blade Case Study
NASA Technical Reports Server (NTRS)
Sayyah, Tarek; Swanson, Gregory R.; Schonberg, W. P.
1999-01-01
The orientation of the single crystal material within a structural component is known to affect the strength and life of the part. The first stage blade of the High Pressure Fuel Turbopump (HPFTP)/ Alternative Turbopump Development (ATD), of the Space Shuttle Main Engine (SSME) was used to study the effects of secondary axis'orientation angles on the failure rate of the blade. A new failure criterion was developed based on normal and shear strains on the primary crystallographic planes. The criterion was verified using low cycle fatigue (LCF) specimen data and a finite element model of the test specimens. The criterion was then used to study ATD/HPFTP first stage blade failure events. A detailed ANSYS finite element model of the blade was used to calculate the failure parameter for the different crystallographic orientations. A total of 297 cases were run to cover a wide range of acceptable orientations within the blade. Those orientations are related to the base crystallographic coordinate system that was created in the ANSYS finite element model. Contour plots of the criterion as a function of orientation for the blade tip and attachment were obtained. Results of the analysis revealed a 40% increase in the failure parameter due to changing of the primary and secondary axes of material orientations. A comparison between failure criterion predictions and actual engine test data was then conducted. The engine test data comes from two ATD/HPFTP builds (units F3- 4B and F6-5D), which were ground tested on the SSME at the Stennis Space Center in Mississippi. Both units experienced cracking of the airfoil tips in multiple blades, but only a few cracks grew all the way across the wall of the hollow core airfoil.
Little, Deirdre Therese; Ward, Harvey Rodrick Grenville
2012-09-30
Premature ovarian failure in a well adolescent is a rare event. Its occurrence raises important questions about causation, which may signal other systemic concerns. This patient presented with amenorrhoea after identifying a change from her regular cycle to irregular and scant periods following vaccinations against human papillomavirus. She declined the oral contraceptives initially prescribed for amenorrhoea. The diagnostic tasks were to determine the reason for her secondary amenorrhoea and then to investigate for possible causes of the premature ovarian failure identified. Although the cause is unknown in 90% of cases, the remaining chief identifiable causes of this condition were excluded. Premature ovarian failure was then notified as a possible adverse event following this vaccination. The young woman was counselled regarding preservation of bone density, reproductive implications and relevant follow-up. This event could hold potential implications for population health and prompts further inquiry.
[Analogies between heart and respiratory muscle failure. Importance to clinical practice].
Köhler, D
2009-01-01
Heart failure is an established diagnosis. Respiratory muscle or ventilatory pump failure, however, is less well known. The latter becomes obvious through hypercapnia, caused by hypoventilation. The respiratory centre tunes into hypercapnea in order to prevent the danger of respiratory muscle overload (hypercapnic ventilatory failure). Hypoventilation will consecutively cause hypoxemia but this will not be responsible for performance limitation. One therefore has to distinguish primary hypoxemia evolving from diseases in the lung parenchyma. Here hypoxemia is the key feature and compensatory hyperventilation usually decreases PaCO2 levels. The cardiac as well as the respiratory pump adapt to an inevitable burden caused by chronic disease. In either case organ muscle mass will increase. If the burden exceeds the range of possible physiological adaptation, compensatory mechanisms will set in that are similar in both instances. During periods of overload either muscle system is mainly fueled by muscular glycogen. In the recovery phase (e. g. during sleep) stores are replenished, which can be recognized by down-regulation of the blood pressure in case of the cardiac pumb or by augmentation of hypercapnia through hypoventilation in case of the respiratory pump. The main function of cardiac and respiratory pump is maintenance of oxygen transport. The human body has developed certain compensatory mechanisms to adapt to insufficient oxygen supply especially during periods of overload. These mechanisms include shift of the oxygen binding curve, expression of respiratory chain isoenzymes capable of producing ATP at lower partial pressures of oxygen and the development of polyglobulia. Medically or pharmacologically the cardiac pump can be unloaded with beta blockers, the respiratory pump by application of inspired oxygen. Newer forms of therapy augment the process of recovery. The heart can be supported through bypass surgery or intravascular pump systems, while respiratory muscles may be supported through elective ventilatory support (mainly non-invasive) in the patient's home. The latter treatment in particular will increase patient endurance and quality of life and decrease mortality. Heart and respiratory pump failure share many common features. Since both take care of oxygen supply to the body, their function and compensatory mechanisms are closely related and linked.
2012-04-30
DoD SERC Aeronautics & Astronautics 5/16/2012 NPS 9th Annual Acquisition Research Symposium...0.6 0.7 0.8 0.9 1 0 60 120 180 240 300 360 420 480 540 600 Pr ob ab ili ty to c om pl et e a m is si on Time (mins) architecture 1 architecture 2...1 6 11 /1 6 12 /1 6 13 /1 6 14 /1 6 15 /1 6 1Pr ob ab ili ty to c om pl et e a m is si on % of system failures worst-case in arch1 worst-case in
Failure of communication and capture: The perils of temporary unipolar pacing system.
Sahinoglu, Efe; Wool, Thomas J; Wool, Kenneth J
2015-06-01
We present a case of a patient with pacemaker dependence secondary to complete heart block who developed loss of capture of her temporary pacemaker. Patient developed torsades de pointes then ventricular fibrillation, requiring CPR and external cardioversion. After patient was stabilized, it was noticed that loss of capture of pacemaker corresponded with nursing care, when the pulse generator was lifted off patient׳s chest wall, and that patient׳s temporary pacing system had been programmed to unipolar mode without knowledge of attending cardiologist. This case highlights the importance of communication ensuring all caregivers are aware of mode of the temporary pacing system.
Failure of engineering artifacts: a life cycle approach.
Del Frate, Luca
2013-09-01
Failure is a central notion both in ethics of engineering and in engineering practice. Engineers devote considerable resources to assure their products will not fail and considerable progress has been made in the development of tools and methods for understanding and avoiding failure. Engineering ethics, on the other hand, is concerned with the moral and social aspects related to the causes and consequences of technological failures. But what is meant by failure, and what does it mean that a failure has occurred? The subject of this paper is how engineers use and define this notion. Although a traditional definition of failure can be identified that is shared by a large part of the engineering community, the literature shows that engineers are willing to consider as failures also events and circumstance that are at odds with this traditional definition. These cases violate one or more of three assumptions made by the traditional approach to failure. An alternative approach, inspired by the notion of product life cycle, is proposed which dispenses with these assumptions. Besides being able to address the traditional cases of failure, it can deal successfully with the problematic cases. The adoption of a life cycle perspective allows the introduction of a clearer notion of failure and allows a classification of failure phenomena that takes into account the roles of stakeholders involved in the various stages of a product life cycle.
Acute Liver Failure During Deferasirox Chelation: A Toxicity Worth Considering.
Menaker, Nathan; Halligan, Katharine; Shur, Natasha; Paige, John; Hickling, Matthew; Nepo, Anne; Weintraub, Lauren
2017-04-01
This case report details a unique case of acute, reversible liver failure in a 12-year-old male with sickle cell anemia on chronic transfusion protocol and deferasirox chelation. There is substantial literature documenting deferasirox-induced renal injury, including Fanconi syndrome, but less documentation of hepatic toxicity and few reports of hepatic failure. The case highlights the importance of close monitoring of ferritin, bilirubin, and transaminases for patients on deferasirox.
[Severe Plasmodium falciparum malaria. Description of 5 cases].
Espinosa, G; Tortajada, C; Gascón, J; Miquel, R; Nicolás, J M; Nadal, P; Corachán, M
1997-09-01
In the last few years a considerable number of imported malaria has been reported in Spain, probably due the increased tourism to areas with endemic malaria, particularly with P. falciparum. This is the species more frequently associated with severe complications and the only one capable of causing cerebral malaria. In this report we review five cases of malaria which required intensive care because of their severity. None of the patients had received chemoprophylaxis. In all cases the admission criterion to the intensive care unit was the organic failure of one or more systems (renal failure and disseminated intravascular coagulation [DIC] mainly) or the presence of changes in the central nervous system. Parasitemia at admission was higher than 5% in all patients. One patient died on account of cerebral malaria. Only one patient had severe complications not directly associated with malaria. In patients who already have severity criteria, a negative parasitemia test during the clinical course does not necessarily implies a clinical improvement nor does it exclude the emergence of complications. On the other hand, a low parasitemic degree is never a contraindication for admission to the intensive care unit when severity criteria are present.
NASA Astrophysics Data System (ADS)
Kostyukov, V. N.; Naumenko, A. P.
2017-08-01
The paper dwells upon urgent issues of evaluating impact of actions conducted by complex technological systems operators on their safe operation considering application of condition monitoring systems for elements and sub-systems of petrochemical production facilities. The main task for the research is to distinguish factors and criteria of monitoring system properties description, which would allow to evaluate impact of errors made by personnel on operation of real-time condition monitoring and diagnostic systems for machinery of petrochemical facilities, and find and objective criteria for monitoring system class, considering a human factor. On the basis of real-time condition monitoring concepts of sudden failure skipping risk, static and dynamic error, monitoring systems, one may solve a task of evaluation of impact that personnel's qualification has on monitoring system operation in terms of error in personnel or operators' actions while receiving information from monitoring systems and operating a technological system. Operator is considered as a part of the technological system. Although, personnel's behavior is usually a combination of the following parameters: input signal - information perceiving, reaction - decision making, response - decision implementing. Based on several researches on behavior of nuclear powers station operators in USA, Italy and other countries, as well as on researches conducted by Russian scientists, required data on operator's reliability were selected for analysis of operator's behavior at technological facilities diagnostics and monitoring systems. The calculations revealed that for the monitoring system selected as an example, the failure skipping risk for the set values of static (less than 0.01) and dynamic (less than 0.001) errors considering all related factors of data on reliability of information perception, decision-making, and reaction fulfilled is 0.037, in case when all the facilities and error probability are under control - not more than 0.027. In case when only pump and compressor units are under control, the failure skipping risk is not more than 0.022, when the probability of error in operator's action is not more than 0.011. The work output shows that on the basis of the researches results an assessment of operators' reliability can be made in terms of almost any kind of production, but considering only technological capabilities, since operators' psychological and general training considerable vary in different production industries. Using latest technologies of engineering psychology and design of data support systems, situation assessment systems, decision-making and responding system, as well as achievement in condition monitoring in various production industries one can evaluate hazardous condition skipping risk probability considering static, dynamic errors and human factor.
The Effectiveness of Warranties in the Solar Photovoltaic and Automobile Industries
NASA Astrophysics Data System (ADS)
Formica, Tyler J.
A warranty is an agreement outlined by a manufacturer to a customer that defines performance requirements for a product or service. Although long warranty periods are a useful marketing tool, in 2011 the warranty claims expense was 2.6% of total sales for computer original equipment manufacturers (OEMs) and is over 2% of total sales in many other industries today. Solar PV systems offer inverters with 5-15 year warranties and PV modules with 25-year performance warranties. This is problematic for the return on investment (ROI) of solar PV systems when the modules are still productive and covered under warranty but inverter failures occur due to degradation of electronic components after their warranty has expired. Out-of-warranty inverter failures during the lifetime of solar panels decrease the ROI of solar PV systems significantly and can cause the annual ROI to actually be negative 15-25 years into the lifetime of the system. This thesis analyzes the factors that contribute to designing an optimal warranty period and the relationship between reliability and warranty periods using General Motors (GM) and the solar PV industry as case studies. A return on investment of a solar photovoltaic system is also conducted and the effect of reliability, changing tax credit structures, and failure areas of solar PV systems are analyzed.
Medication management strategies used by older adults with heart failure: A systems-based analysis.
Mickelson, Robin S; Holden, Richard J
2017-09-01
Older adults with heart failure use strategies to cope with the constraining barriers impeding medication management. Strategies are behavioral adaptations that allow goal achievement despite these constraining conditions. When strategies do not exist, are ineffective or maladaptive, medication performance and health outcomes are at risk. While constraints to medication adherence are described in literature, strategies used by patients to manage medications are less well-described or understood. Guided by cognitive engineering concepts, the aim of this study was to describe and analyze the strategies used by older adults with heart failure to achieve their medication management goals. This mixed methods study employed an empirical strategies analysis method to elicit medication management strategies used by older adults with heart failure. Observation and interview data collected from 61 older adults with heart failure and 31 caregivers were analyzed using qualitative content analysis to derive categories, patterns and themes within and across cases. Data derived thematic sub-categories described planned and ad hoc methods of strategic adaptations. Stable strategies proactively adjusted the medication management process, environment, or the patients themselves. Patients applied situational strategies (planned or ad hoc) to irregular or unexpected situations. Medication non-adherence was a strategy employed when life goals conflicted with medication adherence. The health system was a source of constraints without providing commensurate strategies. Patients strived to control their medication system and achieve goals using adaptive strategies. Future patient self-mangement research can benefit from methods and theories used to study professional work, such as strategies analysis.
Percolation of a general network of networks.
Gao, Jianxi; Buldyrev, Sergey V; Stanley, H Eugene; Xu, Xiaoming; Havlin, Shlomo
2013-12-01
Percolation theory is an approach to study the vulnerability of a system. We develop an analytical framework and analyze the percolation properties of a network composed of interdependent networks (NetONet). Typically, percolation of a single network shows that the damage in the network due to a failure is a continuous function of the size of the failure, i.e., the fraction of failed nodes. In sharp contrast, in NetONet, due to the cascading failures, the percolation transition may be discontinuous and even a single node failure may lead to an abrupt collapse of the system. We demonstrate our general framework for a NetONet composed of n classic Erdős-Rényi (ER) networks, where each network depends on the same number m of other networks, i.e., for a random regular network (RR) formed of interdependent ER networks. The dependency between nodes of different networks is taken as one-to-one correspondence, i.e., a node in one network can depend only on one node in the other network (no-feedback condition). In contrast to a treelike NetONet in which the size of the largest connected cluster (mutual component) depends on n, the loops in the RR NetONet cause the largest connected cluster to depend only on m and the topology of each network but not on n. We also analyzed the extremely vulnerable feedback condition of coupling, where the coupling between nodes of different networks is not one-to-one correspondence. In the case of NetONet formed of ER networks, percolation only exhibits two phases, a second order phase transition and collapse, and no first order percolation transition regime is found in the case of the no-feedback condition. In the case of NetONet composed of RR networks, there exists a first order phase transition when the coupling strength q (fraction of interdependency links) is large and a second order phase transition when q is small. Our insight on the resilience of coupled networks might help in designing robust interdependent systems.
Pokorney, Sean D; Greenfield, Ruth Ann; Atwater, Brett D; Daubert, James P; Piccini, Jonathan P
2014-12-01
Battery failure is an uncommon complication of implantable cardioverter-defibrillators (ICDs), but unanticipated battery depletion can have life-threatening consequences. The purpose of this study was to describe the prevalence of a novel mechanism of battery failure in St. Jude Medical Fortify and Unify ICDs. Cases of premature Fortify battery failure from a single center are reported. A search (January 1, 2010 through November 30, 2013) for Fortify and Unify premature batter failure was conducted of the Food and Drug Administration's Manufacturer and User Facility Device Experience Database (MAUDE). These findings were supplemented with information provided by St. Jude Medical. Premature battery failure for 2 Fortify ICDs in our practice were attributed to the presence of lithium clusters near the cathode, causing a short circuit and high current drain. The prevalence of this mechanism of premature battery failure was 0.6% in our practice. A MAUDE search identified 39 cases of Fortify (30) and Unify (9) premature battery depletion confirmed by the manufacturer, representing a 0.03% prevalence. Four additional Fortify and 2 Unify cases were identified in MAUDE as suspected premature battery depletion, but in these cases the pulse generator was not returned to the manufacturer for evaluation. St. Jude Medical identified 10 cases of premature battery failure due to lithium clusters in Fortify devices (9) and Unify devices (1), representing a 0.004% prevalence. The deposition of lithium clusters near the cathode is a novel mechanism of premature battery failure. The prevalence of this problem is unknown. Providers should be aware of this mechanism for patient management. Copyright © 2014 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.
Information Extraction for System-Software Safety Analysis: Calendar Year 2007 Year-End Report
NASA Technical Reports Server (NTRS)
Malin, Jane T.
2008-01-01
This annual report describes work to integrate a set of tools to support early model-based analysis of failures and hazards due to system-software interactions. The tools perform and assist analysts in the following tasks: 1) extract model parts from text for architecture and safety/hazard models; 2) combine the parts with library information to develop the models for visualization and analysis; 3) perform graph analysis on the models to identify possible paths from hazard sources to vulnerable entities and functions, in nominal and anomalous system-software configurations; 4) perform discrete-time-based simulation on the models to investigate scenarios where these paths may play a role in failures and mishaps; and 5) identify resulting candidate scenarios for software integration testing. This paper describes new challenges in a NASA abort system case, and enhancements made to develop the integrated tool set.
Lightning prevention systems for paper mills
DOE Office of Scientific and Technical Information (OSTI.GOV)
Carpenter, R.B. Jr.
1989-05-01
Paper mills are increasingly relying on sensitive electronic equipment to control their operations. However, the sensitivity of these devices has made mills vulnerable to the effects of lightning strokes. An interruption in the power supply or the destruction of delicate microcircuits can have devastating effects on mill productivity. The authors discuss how lightning strokes can be prevented by a Dissipation Array system (DAS). During the past 17 years, the concept has been applied to a host of applications in regions with a high incidence of lightning activity. With nearly 700 systems now installed, more than 4000 system-years of history havemore » been accumulated. Areas as large as 1 km{sup 2} and towers as high as 2000 ft have been protected and completely isolated from lightning strokes. There have been very few failures, and in every case, the cause of the failure was determined and corrected.« less
Remacle, Marc; Prasad, Vyas M N
2018-03-01
This purpose of this case series is to present the first four cases utilizing micro-phonosurgical instrumentation designed specifically for use with a semi-flexible 'robotic' system-the Medrobotics Flex system and to evaluate the accessibility and feasibility of this platform in the context of transoral robotic surgery (TORS) for laryngeal surgery. Four patients (3 female, 1 male; age range 49-79 years) were operated by the senior author at CHL-a tertiary hospital centre between 2016 and 2017. The 'robot' was deployed in all cases to assess its accessibility and ability to perform surgery in the larynx. All four patients were successfully treated using the system along with newly developed instrumentation specifically focused on phonosurgery. This series has demonstrated accessibility and ability for laryngeal surgery using a novel semi-rigid operator-controlled 'robotic' system. We encountered no device failures and were able to perform all the selected cases uneventfully.
NASA Astrophysics Data System (ADS)
Donati, Massimiliano; Bacchillone, Tony; Saponara, Sergio; Fanucci, Luca
2011-05-01
Today Chronic Heart Failure (CHF) represents one of leading cause of hospitalization among chronic disease, especially for elderly citizens, with a consequent considerable impact on patient quality of life, resources congestion and healthcare costs for the National Sanitary System. The current healthcare model is mostly in-hospital based and consists of periodic visits, but unfortunately it does not allow to promptly detect exacerbations resulting in a large number of rehospitalization. Recently physicians and administrators identify telemonitoring systems as a strategy able to provide effective and cost efficient healthcare services for CHF patients, ensuring early diagnosis and treatments in case of necessity. This work presents a complete and integrated ICT solution to improve the management of chronic heart failure through the remote monitoring of vital signs at patient home, able to connect in-hospital care of acute syndrome with out-of-hospital follow-up. The proposed platform represents the patient's interface, acting as link between biomedical sensors and the data collection point at the Hospital Information System (HIS) in order to handle in transparent way the reception, analysis and forwarding of the main physiological parameters.
Early onset marfan syndrome: Atypical clinical presentation of two cases
Ozyurt, A; Baykan, A; Argun, M; Pamukcu, O; Halis, H; Korkut, S; Yuksel, Z; Gunes, T; Narin, N
2015-01-01
Early onset Marfan Syndrome (eoMFS) is a rare, severe form of Marfan Syndrome (MFS). The disease has a poor prognosis and most patients present with resistance to heart failure treatment during the newborn period. This report presents two cases of eoMFS with similar clinical features diagnosed in the newborn period and who died at an early age due to the complications related to the involvement of the cardiovascular system. PMID:26929908
Klompstra, Leonie Verheijden; Jaarsma, Tiny; Strömberg, Anna
2013-06-01
To explore the influence of the Nintendo Wii on the daily physical activity of a patient with chronic heart failure at home. A 74-year-old Swedish patient with heart failure had access to a Nintendo Wii at home for 12 weeks. Exercise motivation, exercise self-efficacy and exercise capacity were assessed before and after the intervention. Data on perceived physical effort, global well-being and expended energy were collected every day during the intervention. During the 12 weeks of access to the Nintendo Wii, daily physical activity increased by 200% on weekdays and 57% on weekends, compared with baseline. The patient's exercise motivation and exercise self-efficacy increased during the study, whereas perceived physical effort and global well-being did not change. The patient had no difficulties in using the system and did not suffer any major harm. The results of this case study suggest that providing patients with heart failure access to a Nintendo Wii is a promising and safe intervention. The energy expended by the patient per day increased, as did exercise capacity. Playing the Nintendo Wii did not increase the perceived physical effort, but increased motivation to exercise and decreased barriers to exercising.
NASA Technical Reports Server (NTRS)
Jansen, Mark J.; Jones, William R., Jr.; Pepper, Stephen V.
2002-01-01
Many moving mechanical assemblies (MMAs) for space applications rely on a small, initial charge of lubricant for the entire mission lifetime, often in excess of five years. In many cases, the premature failure of a lubricated component can result in mission failure. If lubricant could be resupplied to the contact in-situ, the life of the MMA could be extended. A vacuum spiral orbit tribometer (SOT) was modified to accept a device to supply re-lubrication during testing. It was successfully demonstrated that a liquid lubricant (Pennzane (Registered Trademark)/Nye 2001A) could be evaporated into a contact during operation, lowering the friction coefficient and therefore extending the life of the system.
Using Combined SFTA and SFMECA Techniques for Space Critical Software
NASA Astrophysics Data System (ADS)
Nicodemos, F. G.; Lahoz, C. H. N.; Abdala, M. A. D.; Saotome, O.
2012-01-01
This work addresses the combined Software Fault Tree Analysis (SFTA) and Software Failure Modes, Effects and Criticality Analysis (SFMECA) techniques applied to space critical software of satellite launch vehicles. The combined approach is under research as part of the Verification and Validation (V&V) efforts to increase software dependability and as future application in other projects under development at Instituto de Aeronáutica e Espaço (IAE). The applicability of such approach was conducted on system software specification and applied to a case study based on the Brazilian Satellite Launcher (VLS). The main goal is to identify possible failure causes and obtain compensating provisions that lead to inclusion of new functional and non-functional system software requirements.
Osage oil: Mineral law, murder, mayhem, and manipulation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Strickland, R.
The greatest of the 20th century Osage chiefs, Fred Lookout, feared what the rich oil bonanza under tribal lands would do to his people. He forsaw that oil wealth could turn into a curse as well as a blessing, and it was both. The story of Osage oil is a case history in the failure of law, the failure of Indian policy and the struggle for survival of the indomitable spirit of a great Native people force to deal with both the curse and the blessing of black gold. This article examines law and policy as seen in Osage oilmore » regulation, outlining the legal controls of the land and mineral regulatory system and briefly exploring the breakdowns of the system.« less
NASA Technical Reports Server (NTRS)
Littell, Justin D.
2013-01-01
Increasingly, carbon composite structures are being used in aerospace applications. Their highstrength, high-stiffness, and low-weight properties make them good candidates for replacing many aerospace structures currently made of aluminum or steel. Recently, many of the aircraft engine manufacturers have developed new commercial jet engines that will use composite fan cases. Instead of using traditional composite layup techniques, these new fan cases will use a triaxially braided pattern, which improves case performance. The impact characteristics of composite materials for jet engine fan case applications have been an important research topic because Federal regulations require that an engine case be able to contain a blade and blade fragments during an engine blade-out event. Once the impact characteristics of these triaxial braided materials become known, computer models can be developed to simulate a jet engine blade-out event, thus reducing cost and time in the development of these composite jet engine cases. The two main problems that have arisen in this area of research are that the properties for these materials have not been fully determined and computationally efficient computer models, which incorporate much of the microscale deformation and failure mechanisms, are not available. The research reported herein addresses some of the deficiencies present in previous research regarding these triaxial braided composite materials. The current research develops new techniques to accurately quantify the material properties of the triaxial braided composite materials. New test methods are developed for the polymer resin composite constituent and representative composite coupons. These methods expand previous research by using novel specimen designs along with using a noncontact measuring system that is also capable of identifying and quantifying many of the microscale failure mechanisms present in the materials. Finally, using the data gathered, a new hybrid micromacromechanical computer model is created to simulate the behavior of these composite material systems under static and ballistic impact loading using the test data acquired. The model also quantifies the way in which the fiber/matrix interface affects material response under static and impact loading. The results show that the test methods are capable of accurately quantifying the polymer resin under a variety of strain rates and temperature for three loading conditions. The resin strength and stiffness data show a clear rate and temperature dependence. The data also show the hydrostatic stress effects and hysteresis, all of which can be used by researchers developing composite constitutive models for the resins. The results for the composite data reveal noticeable differences in strength, failure strain, and stiffness in the different material systems presented. The investigations into the microscale failure mechanisms provide information about the nature of the different material system behaviors. Finally, the developed computer model predicts composite static strength and stiffness to within 10 percent of the gathered test data and also agrees with composite impact data, where available.
Multistage Stochastic Programming and its Applications in Energy Systems Modeling and Optimization
NASA Astrophysics Data System (ADS)
Golari, Mehdi
Electric energy constitutes one of the most crucial elements to almost every aspect of life of people. The modern electric power systems face several challenges such as efficiency, economics, sustainability, and reliability. Increase in electrical energy demand, distributed generations, integration of uncertain renewable energy resources, and demand side management are among the main underlying reasons of such growing complexity. Additionally, the elements of power systems are often vulnerable to failures because of many reasons, such as system limits, weak conditions, unexpected events, hidden failures, human errors, terrorist attacks, and natural disasters. One common factor complicating the operation of electrical power systems is the underlying uncertainties from the demands, supplies and failures of system components. Stochastic programming provides a mathematical framework for decision making under uncertainty. It enables a decision maker to incorporate some knowledge of the intrinsic uncertainty into the decision making process. In this dissertation, we focus on application of two-stage and multistage stochastic programming approaches to electric energy systems modeling and optimization. Particularly, we develop models and algorithms addressing the sustainability and reliability issues in power systems. First, we consider how to improve the reliability of power systems under severe failures or contingencies prone to cascading blackouts by so called islanding operations. We present a two-stage stochastic mixed-integer model to find optimal islanding operations as a powerful preventive action against cascading failures in case of extreme contingencies. Further, we study the properties of this problem and propose efficient solution methods to solve this problem for large-scale power systems. We present the numerical results showing the effectiveness of the model and investigate the performance of the solution methods. Next, we address the sustainability issue considering the integration of renewable energy resources into production planning of energy-intensive manufacturing industries. Recently, a growing number of manufacturing companies are considering renewable energies to meet their energy requirements to move towards green manufacturing as well as decreasing their energy costs. However, the intermittent nature of renewable energies imposes several difficulties in long term planning of how to efficiently exploit renewables. In this study, we propose a scheme for manufacturing companies to use onsite and grid renewable energies provided by their own investments and energy utilities as well as conventional grid energy to satisfy their energy requirements. We propose a multistage stochastic programming model and study an efficient solution method to solve this problem. We examine the proposed framework on a test case simulated based on a real-world semiconductor company. Moreover, we evaluate long-term profitability of such scheme via so called value of multistage stochastic programming.
Chronic renal failure in a patient with bilateral ureterocele
Dada, Samuel A.; Rafiu, Mojeed O.; Olanrewaju, Timothy O.
2015-01-01
Ureterocele is a congenital anomaly, in which there is mal-development of the caudal segments of the ureter. There is a female preponderance with most cases seen in Caucasians. Among the reported complications of this condition, chronic renal failure occurring in the setting of ureterocele has not been well documented. We report a case of a young girl with bilateral ureterocele presenting with chronic renal failure, whose management presented a diagnostic failure and inadequate treatment. PMID:26108593
Fault tree analysis for system modeling in case of intentional EMI
NASA Astrophysics Data System (ADS)
Genender, E.; Mleczko, M.; Döring, O.; Garbe, H.; Potthast, S.
2011-08-01
The complexity of modern systems on the one hand and the rising threat of intentional electromagnetic interference (IEMI) on the other hand increase the necessity for systematical risk analysis. Most of the problems can not be treated deterministically since slight changes in the configuration (source, position, polarization, ...) can dramatically change the outcome of an event. For that purpose, methods known from probabilistic risk analysis can be applied. One of the most common approaches is the fault tree analysis (FTA). The FTA is used to determine the system failure probability and also the main contributors to its failure. In this paper the fault tree analysis is introduced and a possible application of that method is shown using a small computer network as an example. The constraints of this methods are explained and conclusions for further research are drawn.
Purtscher-like retinopathy associated with squamous cell carcinoma of the cervix.
Ting, Darren Shu Jeng; Smith, Jonathan; Talks, Stephen James
2018-02-01
To describe a previously unreported case of Purtscher-like retinopathy secondary to severe acute renal failure associated with squamous cell carcinoma of the cervix. This is a case report. A 31-year-old female presented with a week history of acute abdominal pain, vomiting and severe renal failure followed by a sudden onset of bilateral visual loss. Vision was hand movement in either eye with central scotoma. Ophthalmic examination demonstrated bilateral retinal thickening and whitening with intraretinal hemorrhages localized to the peripapillary area, consistent with the diagnosis of Purtscher-like retinopathy. Further systemic examination revealed bilateral hydronephrosis secondary to underlying undiagnosed cervical carcinoma. Patient was treated with a short course of high-dose steroids. At 2 months, patient vision remained poor despite the resolution of retinal edema and hemorrhages. This case serves as the first report of Purtscher-like retinopathy secondary to acute renal failure associated with cervical carcinoma, expanding the list of causes of Purtscher's or Purtscher-like retinopathies. In the presence of significant uremia and absence of previously known association, the authors postulate that the sudden surge of uremia causes increase of endothelin-1 (a potent vasoconstrictor), resulting in downstream endothelin-induced vasculopathy with subsequent occlusion of the pre-capillary arteriolar network.
Chung, C-S; Lee, T-H; Chiu, C-T; Chen, Y
2017-12-01
Intestinal failure characterized by inadequate maintenance of nutrition via normal intestinal function comprises a group of disorders with many different causes. If parenteral nutrition dependency develops, which is associated with higher mortality and complications, it is considered for intestine transplantation. However, the graft failure rate is not low, and acute cellular rejection is one of the most important reasons for graft failure. As a result, early identification of rejection and timely modification of anti-rejection medications have been considered to be associated with better graft and patient survival rates. The diagnostic gold standard for rejection is mainly based on histology, but hours of delay by pathology may occur. Some researchers investigated the association of endoscopic images with graft rejection to provide timely diagnosis. In this study, we present the first case report with characteristic features under magnifying endoscopy with a narrow-band imaging system to predict epithelial regeneration and improvement of graft rejection in a patient with small-bowel transplantation. Copyright © 2017 Elsevier Inc. All rights reserved.
Asdonk, T; Nickenig, G; Hammerstingl, C
2014-10-01
Mitral regurgitation (MR) is a frequent valve disorder in elderly patients, often accompanied by multiple comorbidities such as renal impairment. In these patients percutaneous mitral valve (MV) repair has become an established treatment option but the role of MR on renal dysfunction is not yet well defined. We here report on two cases presenting with severe MR and progressive renal failure caused by cardio renal syndrome, in which percutaneous MV treatment with the MitraClip system significantly improved renal function. These findings suggest that interventional MV repair can prevent progression of renal deterioration in patients suffering from combined advanced heart and renal failure. Further clinical studies are necessary to support our finding and to answer the question whether optimizing renal function by implantation of the MitraClip device is also of prognostic relevance in these patients. © 2014 Wiley Periodicals, Inc.
Outpatient Treatment of the Sexually Motivated Murderer and Potential Murderer.
ERIC Educational Resources Information Center
Schlesinger, Louis B.; Revitch, Eugene
1990-01-01
Introduces the psychopathology and psychodynamics of sex murderer (and potential sex murderer) with emphasis on treatment in outpatient setting. Reviews system of classification of murder based on motivational dynamics of the act itself. Presents three cases that demonstrate a treatment failure, successful treatment of a catathymic sex murderer,…
NASA Technical Reports Server (NTRS)
Owens, Andrew; De Weck, Olivier L.; Stromgren, Chel; Goodliff, Kandyce; Cirillo, William
2017-01-01
Future crewed missions to Mars present a maintenance logistics challenge that is unprecedented in human spaceflight. Mission endurance – defined as the time between resupply opportunities – will be significantly longer than previous missions, and therefore logistics planning horizons are longer and the impact of uncertainty is magnified. Maintenance logistics forecasting typically assumes that component failure rates are deterministically known and uses them to represent aleatory uncertainty, or uncertainty that is inherent to the process being examined. However, failure rates cannot be directly measured; rather, they are estimated based on similarity to other components or statistical analysis of observed failures. As a result, epistemic uncertainty – that is, uncertainty in knowledge of the process – exists in failure rate estimates that must be accounted for. Analyses that neglect epistemic uncertainty tend to significantly underestimate risk. Epistemic uncertainty can be reduced via operational experience; for example, the International Space Station (ISS) failure rate estimates are refined using a Bayesian update process. However, design changes may re-introduce epistemic uncertainty. Thus, there is a tradeoff between changing a design to reduce failure rates and operating a fixed design to reduce uncertainty. This paper examines the impact of epistemic uncertainty on maintenance logistics requirements for future Mars missions, using data from the ISS Environmental Control and Life Support System (ECLS) as a baseline for a case study. Sensitivity analyses are performed to investigate the impact of variations in failure rate estimates and epistemic uncertainty on spares mass. The results of these analyses and their implications for future system design and mission planning are discussed.
De Carli, Angelo; Lanzetti, Riccardo Maria; Monaco, Edoardo; Labianca, Luca; Mossa, Luigi; Ferretti, Andrea; Feretti, Andrea
2012-11-01
Despite technical advances in rotator cuff surgery, recurrent or persistent defects in the repaired tendon continue to occur. The improved strength of sutures and suture anchors has shown that the most common site of failure is the suture-tendon interface. The purpose of this study was to compare two different types of repair under both cyclic and load-to-failure conditions. The hypothesis is that the use of a fixation system with knotless anchor and taped suture results in better biomechanical performance, under both cyclic and load-to-failure conditions. Thirty bovine shoulder specimens were randomly assigned to two group tests: the Swivelock 5-mm anchor with Fibertape (Group A) and the Bio-Corkscrew 5 mm with Fiberwire (Group B). We simulated the reconstruction of a rotator cuff tear with a single-row technique, performing a tenodesis with types A and B fixation. Each specimen underwent cyclic testing from 5 to 30 N for 30 cycles, followed by load-to-failure testing, in order to calculate the ultimate failure load (UFL). Load-to-failure tests revealed a significantly higher UFL in Group A than in Group B. Wire fixing failed at the anchor loop whereas tape fixing failed at the sutures, suture-tendon interface, and anchors. Cyclic testing revealed no significantly greater slippage between the two groups. Stiffness values were not statistically significantly different. In all cases, tendons remained intact until the end of the cyclic testing. The tape structure is biomechanically stronger than the wire structure.
Elective neck irradiation for nasopharyngeal carcinoma.
Wang, C J; Chen, H C; Huang, E Y; Lee, S P
2000-07-01
This study was conducted to evaluate the effectiveness of elective neck irradiation (ENI) for nasopharyngeal carcinoma (NPC), and to analyze factors associated with ENI failure. A radiation port covering the side of a neck without gross nodal metastasis was qualified for evaluation of the effectiveness of ENI. From 1988 through 1992, a total of 261 patients with N0 (130 cases), N1 (91 cases), and N3 (40 cases) NPCs were studied. All patients were irradiated with 60Co teletherapy or 10 MV x-ray to a total dose of 46.8 Gy/26 fractions, followed by a boost treatment to the primary site to a total dose of 64.8 to 75.6 Gy/36-42 fractions. All ENI ports received irradiation to a dose of 46.8 to 60.8 Gy. The duration of follow-up was 6 to 10 years, with a median of 8.1 years. Factors associated with to the risk of ENI failure were analyzed. (1) The overall 5-year actuarial local control rate and actuarial survival rate were 74% and 63%, respectively. (2) Among the 261 cases in which ENI treatment was used, the treatment failed in 12 cases, accounting for a crude ENI failure rate of 5%. The overall 5- and 10-year cumulative risk of ENI failure was 5% and 7%, respectively. (3) Time from the start of treatment to ENI failure ranged from 9 to 66 months, with a median of 17 months. (4) Of the 12 patients for whom EMI failed, 11 (92%) had recurrence in the upper neck, and one in the lower neck. (5) Existence of prior failure at the primary site was the only factor significantly correlated with the risk of ENI failure (p < 0.001). The 5-year cumulative risk of ENI failure for patients with local failure vs. those without was 16% vs. 1% (p < 0.0001). Moderate-dose ENI was highly effective in the control of subclinical disease in the neck for NPC. ENI failure was closely associated with prior failure at the primary site, implying that local primary tumor failure may lead to an increased potential for metastasis to the neck.
NASA Astrophysics Data System (ADS)
Arief, I. S.; Suherman, I. H.; Wardani, A. Y.; Baidowi, A.
2017-05-01
Control and monitoring system is a continuous process of securing the asset in the Marine Current Renewable Energy. A control and monitoring system is existed each critical components which is embedded in Failure Mode Effect Analysis (FMEA) method. As the result, the process in this paper developed through a matrix sensor. The matrix correlated to critical components and monitoring system which supported by sensors to conduct decision-making.
Managing heart failure in the long-term care setting: nurses' experiences in Ontario, Canada.
Strachan, Patricia H; Kaasalainen, Sharon; Horton, Amy; Jarman, Hellen; D'Elia, Teresa; Van Der Horst, Mary-Lou; Newhouse, Ian; Kelley, Mary Lou; McAiney, Carrie; McKelvie, Robert; Heckman, George A
2014-01-01
Implementation of heart failure guidelines in long-term care (LTC) settings is challenging. Understanding the conditions of nursing practice can improve management, reduce suffering, and prevent hospital admission of LTC residents living with heart failure. The aim of the study was to understand the experiences of LTC nurses managing care for residents with heart failure. This was a descriptive qualitative study nested in Phase 2 of a three-phase mixed methods project designed to investigate barriers and solutions to implementing the Canadian Cardiovascular Society heart failure guidelines into LTC homes. Five focus groups totaling 33 nurses working in LTC settings in Ontario, Canada, were audiorecorded, then transcribed verbatim, and entered into NVivo9. A complex adaptive systems framework informed this analysis. Thematic content analysis was conducted by the research team. Triangulation, rigorous discussion, and a search for negative cases were conducted. Data were collected between May and July 2010. Nurses characterized their experiences managing heart failure in relation to many influences on their capacity for decision-making in LTC settings: (a) a reactive versus proactive approach to chronic illness; (b) ability to interpret heart failure signs, symptoms, and acuity; (c) compromised information flow; (d) access to resources; and (e) moral distress. Heart failure guideline implementation reflects multiple dynamic influences. Leadership that addresses these factors is required to optimize the conditions of heart failure care and related nursing practice.
Reliability of robotic system during general surgical procedures in a university hospital.
Buchs, Nicolas C; Pugin, François; Volonté, Francesco; Morel, Philippe
2014-01-01
Data concerning the reliability of robotic systems are scarce, especially for general surgery. The aim of this study was to assess the incidence and consequences of robotic malfunction in a teaching institution. From January 2006 to September 2012, 526 consecutive robotic general surgical procedures were performed. All failures were prospectively recorded in a computerized database and reviewed retrospectively. Robotic malfunctions occurred in 18 cases (3.4%). These dysfunctions concerned the robotic instruments in 9 cases, the robotic arms in 4 cases, the surgical console in 3 cases, and the optical system in 2 cases. Two malfunctions were considered critical, and 1 led to a laparoscopic conversion (conversion rate due to malfunction, .2%). Overall, there were more dysfunctions at the beginning of the study period (2006 to 2010) than more recently (2011 to 2012) (4.2% vs 2.6%, P = .35). The robotic system malfunction rate was low. Most malfunctions could be resolved during surgery, allowing the procedures to be completed safely. With increased experience, the system malfunction rate seems to be reduced. Copyright © 2014 Elsevier Inc. All rights reserved.
Gauthier, Sonia
2010-12-01
Many domestic violence cases do not go to trial because the victim refuses to testify. This article presents a qualitative study exploring the dismissal of criminal charges in domestic violence cases. The 22 judicial and psychosocial professionals interviewed in Montreal, Canada, discussed various consequences of the legal decision to dismiss the charges on victims, perpetrators, justice system professionals, and society as a whole. Respondents clearly did not view the withdrawal of charges as a failure of the criminalization of domestic violence.
Campuzano-García, Andrés Eduardo; Rodríguez-Arámbula, Adriana; Torres-Alvarez, Bertha; Castanedo-Cázares, Juan Pablo
2015-05-18
Mitochondrial myopathies are inborn metabolism defect diseases manifested by symptoms reflecting failure of the final step in the mitochondrial respiratory chain. Clinical expression of these conditions can vary widely, but typically includes organ systems with a high energy demand, such as striated muscle, myocardium, and nervous and liver tissues. In contrast, cutaneous manifestations are rare and are non-specific, most commonly presenting as pigmentation disorders. In this case report, we present a case of Alpers syndrome accompanied by hyperpigmentation and atrophy in skin folds.
Acute-on-chronic liver failure: an update
Solà, Elsa; Moreau, Richard; Ginès, Pere
2017-01-01
Acute-on-chronic liver failure (ACLF) is a syndrome characterised by acute decompensation of chronic liver disease associated with organ failures and high short-term mortality. Alcohol and chronic viral hepatitis are the most common underlying liver diseases. Up to 40%–50% of the cases of ACLF have no identifiable trigger; in the remaining patients, sepsis, active alcoholism and relapse of chronic viral hepatitis are the most common reported precipitating factors. An excessive systemic inflammatory response seems to play a crucial role in the development of ACLF. Using a liver-adapted sequential organ assessment failure score, it is possible to triage and prognosticate the outcome of patients with ACLF. The course of ACLF is dynamic and changes over the course of hospital admission. Most of the patients will have a clear prognosis between day 3 and 7 of hospital admission and clinical decisions such as evaluation for liver transplant or discussion over goals of care could be tailored using clinical scores. Bioartificial liver support systems, granulocyte-colony stimulating factors or stem-cell transplant are in the horizon of medical care of this patient population; however, data are too premature to implement them as standard of care. PMID:28053053
Specifying design conservatism: Worst case versus probabilistic analysis
NASA Technical Reports Server (NTRS)
Miles, Ralph F., Jr.
1993-01-01
Design conservatism is the difference between specified and required performance, and is introduced when uncertainty is present. The classical approach of worst-case analysis for specifying design conservatism is presented, along with the modern approach of probabilistic analysis. The appropriate degree of design conservatism is a tradeoff between the required resources and the probability and consequences of a failure. A probabilistic analysis properly models this tradeoff, while a worst-case analysis reveals nothing about the probability of failure, and can significantly overstate the consequences of failure. Two aerospace examples will be presented that illustrate problems that can arise with a worst-case analysis.
Orion GN&C Fault Management System Verification: Scope And Methodology
NASA Technical Reports Server (NTRS)
Brown, Denise; Weiler, David; Flanary, Ronald
2016-01-01
In order to ensure long-term ability to meet mission goals and to provide for the safety of the public, ground personnel, and any crew members, nearly all spacecraft include a fault management (FM) system. For a manned vehicle such as Orion, the safety of the crew is of paramount importance. The goal of the Orion Guidance, Navigation and Control (GN&C) fault management system is to detect, isolate, and respond to faults before they can result in harm to the human crew or loss of the spacecraft. Verification of fault management/fault protection capability is challenging due to the large number of possible faults in a complex spacecraft, the inherent unpredictability of faults, the complexity of interactions among the various spacecraft components, and the inability to easily quantify human reactions to failure scenarios. The Orion GN&C Fault Detection, Isolation, and Recovery (FDIR) team has developed a methodology for bounding the scope of FM system verification while ensuring sufficient coverage of the failure space and providing high confidence that the fault management system meets all safety requirements. The methodology utilizes a swarm search algorithm to identify failure cases that can result in catastrophic loss of the crew or the vehicle and rare event sequential Monte Carlo to verify safety and FDIR performance requirements.
Carranza, Noemí; Ramos, Victoria; Lizana, Francisca G; García, Jorge; del Pozo, Alejando; Monteagudo, José Luis
2010-09-01
The objective of this study was to determine already reported cases of transmission/reception failure and interferences to evaluate the safety and security of the new mobile home telemedicine systems. The literature published in the last 10 years (1998-2009) has been reviewed, by searching in several databases. Searches on transmission effectiveness and electromagnetic compatibility were made manually through journals, conference proceedings, and also the healthcare technology assessment agencies' Web pages. Search strategies developed through electronic databases and manual search identified a total of 886 references, with 44 finally being included in the results. They have been divided by technology in the transmission/reception effectiveness studies, and according to the type of medical device in the case of electromagnetic interferences studies. The study reveals that there are numerous publications on telemedicine and home-monitoring systems using wireless networks. However, literature on effectiveness in terms of connectivity and transmission problems and electromagnetic interferences is limited. From the collected studies, it can be concluded that there are transmission failures, low-coverage areas, errors in the transmission of packets, and so on. Moreover, cases of serious interferences in medical instruments have also been reported. These facts highlight the lack of studies and specific recommendations to be followed in the implementation of biomonitoring systems in domestic environments using wireless networks.
Code of Federal Regulations, 2010 CFR
2010-04-01
... severe (modified New York Heart Association Class II, III, or IV) congestive heart failure due to... heart failure as appropriate on a case-by-case basis. (3) Limitations. Federal law restricts this drug...
Code of Federal Regulations, 2012 CFR
2012-04-01
... severe (modified New York Heart Association Class II, III, or IV) congestive heart failure due to... heart failure as appropriate on a case-by-case basis. (3) Limitations. Federal law restricts this drug...
Code of Federal Regulations, 2013 CFR
2013-04-01
... severe (modified New York Heart Association Class II, III, or IV) congestive heart failure due to... heart failure as appropriate on a case-by-case basis. (3) Limitations. Federal law restricts this drug...
Code of Federal Regulations, 2011 CFR
2011-04-01
... severe (modified New York Heart Association Class II, III, or IV) congestive heart failure due to... heart failure as appropriate on a case-by-case basis. (3) Limitations. Federal law restricts this drug...
Code of Federal Regulations, 2014 CFR
2014-04-01
... severe (modified New York Heart Association Class II, III, or IV) congestive heart failure due to... heart failure as appropriate on a case-by-case basis. (3) Limitations. Federal law restricts this drug...
Design for testability and diagnosis at the system-level
NASA Technical Reports Server (NTRS)
Simpson, William R.; Sheppard, John W.
1993-01-01
The growing complexity of full-scale systems has surpassed the capabilities of most simulation software to provide detailed models or gate-level failure analyses. The process of system-level diagnosis approaches the fault-isolation problem in a manner that differs significantly from the traditional and exhaustive failure mode search. System-level diagnosis is based on a functional representation of the system. For example, one can exercise one portion of a radar algorithm (the Fast Fourier Transform (FFT) function) by injecting several standard input patterns and comparing the results to standardized output results. An anomalous output would point to one of several items (including the FFT circuit) without specifying the gate or failure mode. For system-level repair, identifying an anomalous chip is sufficient. We describe here an information theoretic and dependency modeling approach that discards much of the detailed physical knowledge about the system and analyzes its information flow and functional interrelationships. The approach relies on group and flow associations and, as such, is hierarchical. Its hierarchical nature allows the approach to be applicable to any level of complexity and to any repair level. This approach has been incorporated in a product called STAMP (System Testability and Maintenance Program) which was developed and refined through more than 10 years of field-level applications to complex system diagnosis. The results have been outstanding, even spectacular in some cases. In this paper we describe system-level testability, system-level diagnoses, and the STAMP analysis approach, as well as a few STAMP applications.
The judgement of simultaneous commutation failure in HVDC about hierarchical connection to AC grid
NASA Astrophysics Data System (ADS)
Li, Ming; Song, Xinli; Huang, Daoshan; Liu, Wenzhuo; Zhao, Shutao; Ye, Xiaohui; Meng, Hang
2017-09-01
The hierarchical connection to AC grid at inverter sides in UHVDC has been take in several projects. This paper introduced the frame of the connection mode in hierarchical access system and compared it with the traditional one at the case of HVDC-Cigre. Then the criterion of commutation failure according to the same valves current was deduced. In order to verify the accuracy of the criterion, this paper used PSD-BPA (Bonneville Power Administration) to simulate the setting voltage drop in the East China power grid and certified the correctness of the formula.
Frumenti, Jeanine M; Kurtz, Abby
2014-01-01
An innovative leadership training program for patient care managers (PCMs) aimed at improving the management of operational failures was conducted at a large metropolitan hospital center. The program focused on developing and enhancing the transformational leadership skills of PCMs by improving their ability to manage operational failures in general and, in this case, hospital-acquired pressure ulcers. The PCMs received 8 weeks of intense training using the Toyota Production System process improvement approach, along with executive coaching. Compared with the control group, the gains made by the intervention group were statistically significant.
Sleep apnoea syndromes and the cardiovascular system.
Pepperell, Justin C
2011-06-01
Management of SAS and cardiovascular disease risk should be closely linked. It is important to screen for cardiovascular disease risk in patients with SAS and vice versa. CSA/CSR may be improved by ventilation strategies in heart failure, but benefit remains to be proven. For OSA, although CPAP may reduce cardiovascular disease risk, its main benefit is symptom control. In the longer-term, CPAP should be used alongside standard cardiovascular risk reduction strategies including robust weight management programmes, with referral for bariatric surgery in appropriate cases. CPAP and NIV should be considered for acute admissions with decompensated cardiac failure.
Deterioration of ZnO/SiO2 diode packages in high humidity
NASA Technical Reports Server (NTRS)
Evans, John; Wagner, Scott
1987-01-01
A case study is reported in which the ZnO/SiO2 glass used to package a power rectifier combined with the design to produce a catastropic corrosion failure of the system. Metallic Zn inclusions, present in the glass, played a critical role in creating a conductive path for corrosion currents. Actual equipment failure was the result of an open circuit trace created by corrosion. It is concluded that the presence of Zn inclusions in the glass of this type of package may result in long-term reliability problems for equipment used in high humidity environments.
Hardening communication ports for survival in electrical overstress environments
NASA Technical Reports Server (NTRS)
Clark, O. Melville
1991-01-01
Greater attention is being focused on the protection of data I/O ports since both experience and lab tests have shown that components at these locations are extremely vulnerable to electrical overstress (EOS) in the form of transient voltages. Lightning and electrostatic discharge (ESD) are the major contributors to these failures; however, these losses can be prevented. Hardening against transient voltages at both the board level and system level has a proven record of improving reliability by orders of magnitude. The EOS threats, typical failure modes, and transient voltage mitigation techniques are reviewed. Case histories are also reviewed.
Modeling Security Aspects of Network
NASA Astrophysics Data System (ADS)
Schoch, Elmar
With more and more widespread usage of computer systems and networks, dependability becomes a paramount requirement. Dependability typically denotes tolerance or protection against all kinds of failures, errors and faults. Sources of failures can basically be accidental, e.g., in case of hardware errors or software bugs, or intentional due to some kind of malicious behavior. These intentional, malicious actions are subject of security. A more complete overview on the relations between dependability and security can be found in [31]. In parallel to the increased use of technology, misuse also has grown significantly, requiring measures to deal with it.
NASA Astrophysics Data System (ADS)
Manconi, A.; Giordan, D.
2015-07-01
We apply failure forecast models by exploiting near-real-time monitoring data for the La Saxe rockslide, a large unstable slope threatening Aosta Valley in northern Italy. Starting from the inverse velocity theory, we analyze landslide surface displacements automatically and in near real time on different temporal windows and apply straightforward statistical methods to obtain confidence intervals on the estimated time of failure. Here, we present the result obtained for the La Saxe rockslide, a large unstable slope located in Aosta Valley, northern Italy. Based on this case study, we identify operational thresholds that are established on the reliability of the forecast models. Our approach is aimed at supporting the management of early warning systems in the most critical phases of the landslide emergency.
[A case of Legionella pneumonia with multiple organ failure].
Li, Jiali; Wen, Rui; Deng, Hong; Li, Qian
2016-06-28
Legionella pneumonia (LP) is a rare systemic infectious disease, which is often misdiagnosed by clinicians due to the atypical symptoms. A middle-aged man who suffered from fever and dyspnea was diagnosed as community acquired pneumonia (CAP) in Changsha Central Hospital in March 2015. The treatment was unsatisfied firstly. The patients showed further symptoms of rhabdomyolysis, acute liver and renal failure, and impaired neural functions, who was diagnosed as LP with multiple organ failure based on a positive test for Legionella antibody. The patient was recovered after treated with moxifloxacin combined with azithromycin and continuous renal replacement therapy. LP should be paid attention when patient was diagnosed as CAP and failed to be treated. The satisfied outcome is achieved after application of macrolide, quinolones and comprehensive treatments.
Terano, Chikako; Ishikura, Kenji; Miura, Masaru; Hamada, Riku; Harada, Ryoko; Sakai, Tomoyuki; Hamasaki, Yuko; Hataya, Hiroshi; Ando, Takashi; Honda, Masataka
2016-05-01
No large cohort study has yet determined the incidence of acute kidney injury (AKI) in children with heart failure treated with renin-angiotensin system (RAS) inhibitors. We thus retrospectively analyzed the incidence and risk factors for severe AKI (stages 2-3 according to the Kidney Disease Improving Global Outcomes (KDIGO) guidelines) at our institutions from 2008 to 2011. Among 312 children (162 boys; median age, 7.3 months), 59 cases of AKI occurred in 45 children. The incidence of AKI was 14.3 cases per 100 person-years overall (follow-up 413.6 person-years), or 27.3, 16.8, and 4.5 cases per 100 person-years in children aged <1, 1-3, and ≥4 years, respectively. Among them, 23 (39.0 %) children had metabolic acidosis and 14 (23.7 %) had hyperkalemia. Younger age, myocardial disease, cyanotic congenital heart disease, use of spironolactone, and cardiac surgery were independent risk factors for AKI. Furthermore, 37.3 % of children suffered dehydration during AKI. AKI incidence is relatively high in children, particularly younger children, with heart failure treated using RAS inhibitors. Careful monitoring of renal function and serum electrolytes is essential. Proper management of fluid balance after infection and cardiac surgery may reduce the risk of AKI. Temporary discontinuation in RAS inhibitors should be considered during dehydration or surgery. • Angiotensin-converting enzyme inhibitors (ACEIs) and angiotensin receptor blockers (ARBs) are the two main classes of renin-angiotensin system (RAS) inhibitors used to treat hypertension, heart failure, and chronic kidney disease. Acute kidney injury (AKI) and hyperkalemia are potentially life-threatening complications associated with the use of ACEIs and ARBs. Some reports have suggested that dehydration and cardiac surgery are risk factors for AKI in children. However, no large-scale cohort studies have determined the incidence of AKI, its risk factors, and its outcomes in children with heart failure treated with ACEIs and/or ARBs. What is new: • In this retrospective cohort study, we determined the incidence, severity, and risk factors for severe AKI in children with heart failure treated with ACEIs and/or ARBs. The incidence of AKI in these children was relatively high (14.3 episodes per 100 person-years). In addition, younger age, myocardial disease, cyanotic congenital heart disease, concomitant use of spironolactone, and cardiac surgery were risk factors for AKI. Furthermore, 37.3 % of children had dehydration during AKI episodes. • Our results suggested that appropriate fluid balance after infection and cardiac surgery might reduce the risk of AKI and its complications. Temporary discontinuation or reductions in the levels of ACEIs and/or ARBs during dehydration or before surgery may also be warranted in these patients.
Nacif, Lucas Souto; Waisberg, Daniel R; Pinheiro, Rafael Soares; Lima, Fabiana Roberto; Rocha-Santos, Vinicius; Andraus, Wellington; D'Albuquerque, Luiz Carneiro
2018-03-10
There is a worldwide problem of acute liver failure and mortality associated with remaining on the waiting for a liver transplant. In this study, we highlight results published in recent years by leading transplant centers in evaluating imatinib-induced acute liver failure in chronic myeloid leukemia and follow-up in liver transplantation. A 36-year-old brown-skinned woman (mixed Brazilian race) diagnosed 1 year earlier with chronic myeloid leukemia was started after delivery of a baby and continued for 6 months with imatinib mesylate (selective inhibitor of Bcr-Abl tyrosine kinase), which induced liver failure. We conducted a literature review using the PubMed database for articles published through September 2017, and we demonstrate a role of liver transplant in this situation for imatinib-induced liver failure. We report previously published results and a successful liver transplant after acute liver failure due to imatinib-induced in chronic myeloid leukemia treatment. We report a case of a successful liver transplant after acute liver failure resulting from imatinib-induced chronic myeloid leukemia treatment. The literature reveals the importance of prompt acute liver failure diagnosis and treatment with liver transplant in selected cases.
Using diagnostic experiences in experience-based innovative design
NASA Astrophysics Data System (ADS)
Prabhakar, Sattiraju; Goel, Ashok K.
1992-03-01
Designing a novel class of devices requires innovation. Often, the design knowledge of these devices does not identify and address the constraints that are required for their performance in the real world operating environment. So any new design adapted from these devices tend to be similarly sketchy. In order to address this problem, we propose a case-based reasoning method called performance driven innovation (PDI). We model the design as a dynamic process, arrive at a design by adaptation from the known designs, generate failures for this design for some new constraints, and then use this failure knowledge to generate the required design knowledge for the new constraints. In this paper, we discuss two aspects of PDI: the representation of PDI cases and the translation of the failure knowledge into design knowledge for a constraint. Each case in PDI has two components: design and failure knowledge. Both of them are represented using a substance-behavior-function model. Failure knowledge has internal device failure behaviors and external environmental behaviors. The environmental behavior, for a constraint, interacting with the design behaviors, results in the failure internal behavior. The failure adaptation strategy generates functions, from the failure knowledge, which can be addressed using the routine design methods. These ideas are illustrated using a coffee-maker example.
Junctional bradycardia with verapamil in renal failure--care required even with mild hyperkalaemia.
Hegazi, M O; Aldabie, G; Al-Mutairi, S; El Sayed, A
2012-12-01
Treatment for hypertension with verapamil has a favourable renoprotective effect and is generally considered safe in patients with mild to moderate renal failure. In this report, we highlight the vulnerability of patients with mild to moderate renal failure to verapamil side effects especially in the presence of hyperkalaemia. We report two cases of junctional bradycardia with slow release (SR) verapamil therapy in the presence of mild hyperkalaemia in patients with mild to moderate chronic renal failure. Verapamil and hyperkalaemia may synergistically increase the vulnerability to atrioventricular conduction delay. Renal failure patients with baseline mild hyperkalaemia are particularly liable to bradyarrhythmias with SR verapamil. In such cases, we would recommend verapamil dose reduction and avoidance of SR formulation. In cases of verapamil toxicity, actively treating any level of hyperkalaemia is recommended. © 2012 Blackwell Publishing Ltd.
The probability of containment failure by direct containment heating in Zion. Supplement 1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pilch, M.M.; Allen, M.D.; Stamps, D.W.
1994-12-01
Supplement 1 of NUREG/CR-6075 brings to closure the DCH issue for the Zion plant. It includes the documentation of the peer review process for NUREG/CR-6075, the assessments of four new splinter scenarios defined in working group meetings, and modeling enhancements recommended by the working groups. In the four new scenarios, consistency of the initial conditions has been implemented by using insights from systems-level codes. SCDAP/RELAP5 was used to analyze three short-term station blackout cases with Different lead rates. In all three case, the hot leg or surge line failed well before the lower head and thus the primary system depressurizedmore » to a point where DCH was no longer considered a threat. However, these calculations were continued to lower head failure in order to gain insights that were useful in establishing the initial and boundary conditions. The most useful insights are that the RCS pressure is-low at vessel breach metallic blockages in the core region do not melt and relocate into the lower plenum, and melting of upper plenum steel is correlated with hot leg failure. THE SCDAP/RELAP output was used as input to CONTAIN to assess the containment conditions at vessel breach. The containment-side conditions predicted by CONTAIN are similar to those originally specified in NUREG/CR-6075.« less
Hyperthyroidism as a reversible cause of right ventricular overload and congestive heart failure
Di Giovambattista, Raniero
2008-01-01
We describe a case of severe congestive heart failure and right ventricular overload associated with overt hyperthyroidism, completely reversed with antithyroid therapy in a few week. It represents a very unusual presentation of overt hyperthyroidism because of the severity of right heart failure. The impressive right ventricular volume overload made mandatory to perform transesophageal echo and angio-TC examination to exclude the coexistence of ASD or anomalous pulmonary venous return. Only a few cases of reversible right heart failure, with or without pulmonary hypertension, have been reported worldwide. In our case the most striking feature has been the normalization of the cardiovascular findings after six weeks of tiamazole therapy. PMID:18549503
Economic impact of heart failure according to the effects of kidney failure.
Sicras Mainar, Antoni; Navarro Artieda, Ruth; Ibáñez Nolla, Jordi
2015-01-01
To evaluate the use of health care resources and their cost according to the effects of kidney failure in heart failure patients during 2-year follow-up in a population setting. Observational retrospective study based on a review of medical records. The study included patients ≥ 45 years treated for heart failure from 2008 to 2010. The patients were divided into 2 groups according to the presence/absence of KF. Main outcome variables were comorbidity, clinical status (functional class, etiology), metabolic syndrome, costs, and new cases of cardiovascular events and kidney failure. The cost model included direct and indirect health care costs. Statistical analysis included multiple regression models. The study recruited 1600 patients (prevalence, 4.0%; mean age 72.4 years; women, 59.7%). Of these patients, 70.1% had hypertension, 47.1% had dyslipidemia, and 36.2% had diabetes mellitus. We analyzed 433 patients (27.1%) with kidney failure and 1167 (72.9%) without kidney failure. Patients with kidney failure were associated with functional class III-IV (54.1% vs 40.8%) and metabolic syndrome (65.3% vs 51.9%, P<.01). The average unit cost was €10,711.40. The corrected cost in the presence of kidney failure was €14,868.20 vs €9,364.50 (P=.001). During follow-up, 11.7% patients developed ischemic heart disease, 18.8% developed kidney failure, and 36.1% developed heart failure exacerbation. Comorbidity associated with heart failure is high. The presence of kidney failure increases the use of health resources and leads to higher costs within the National Health System. Copyright © 2014 Sociedad Española de Cardiología. Published by Elsevier Espana. All rights reserved.
Gallagher, Joseph; James, Stephanie; Keane, Ciara; Fitzgerald, Annie; Travers, Bronagh; Quigley, Etain; Hecht, Christina; Zhou, Shuaiwei; Watson, Chris; Ledwidge, Mark; McDonald, Kenneth
2017-08-01
We undertook a mixed-methods evaluation of a Web-based conferencing service (virtual consult) between general practitioners (GPs) and cardiologists in managing patients with heart failure in the community to determine its effect on use of specialist heart failure services and acceptability to GPs. All cases from June 2015 to October 2016 were recorded using a standardized recording template, which recorded patient demographics, medical history, medications, and outcome of the virtual consult for each case. Quantitative surveys and qualitative interviewing of 17 participating GPs were also undertaken. During this time, 142 cases were discussed-68 relating to a new diagnosis of heart failure, 53 relating to emerging deterioration in a known heart failure patient, and 21 relating to therapeutic issues. Only 17% required review in outpatient department following the virtual consultation. GPs reported increased confidence in heart failure management, a broadening of their knowledge base, and a perception of overall better patient outcomes. These data from an initial experience with Heart Failure Virtual Consultation present a very positive impact of this strategy on the provision of heart failure care in the community and acceptability to users. Further research on the implementation and expansion of this strategy is warranted. © 2017 The Authors. ESC Heart Failure published by John Wiley & Sons Ltd on behalf of the European Society of Cardiology.
Using a personal digital assistant to document clinical pharmacy services in an intensive care unit.
Lau, A; Balen, R M; Lam, R; Malyuk, D L
2001-07-01
Management Case Studies describe approaches to real-life management problems in health systems. Each installment is a brief description of a problem and how it was dealt with. The cases are intended to help readers deal with similar experiences in their own work sites. Problem solving, not hypothesis testing, is emphasized. Successful resolution of the management issue is not a criterion for publication--important lessons can be learned from failures, too.
26 CFR 1.547-5 - Deduction denied in case of fraud or wilful failure to file timely return.
Code of Federal Regulations, 2010 CFR
2010-04-01
... failure to file timely return. 1.547-5 Section 1.547-5 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Personal Holding Companies § 1.547-5 Deduction denied in case of fraud or wilful failure to file timely return. No deduction...
26 CFR 1.547-5 - Deduction denied in case of fraud or wilful failure to file timely return.
Code of Federal Regulations, 2011 CFR
2011-04-01
... failure to file timely return. 1.547-5 Section 1.547-5 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Personal Holding Companies § 1.547-5 Deduction denied in case of fraud or wilful failure to file timely return. No deduction...
Myoglobinuric acute renal failure in phencyclidine overdose: report of observations in eight cases.
Patel, R; Das, M; Palazzolo, M; Ansari, A; Balasubramaniam, S
1980-11-01
Eight cases of myoglobinuric acute renal failure that developed following exposure to phencyclidine were seen in the emergency department of the Martin Luther King Jr. General Hospital during a period of 36 months. All eight survived with complete recovery of renal function. Dialysis was necessary in three patients. Acute renal failure is an uncommon complication of phencyclidine abuse.
Cooke, Christopher C; Hozack, William; Lavernia, Carlos; Sharkey, Peter; Shastri, Shani; Rothman, Richard H
2003-10-01
Fifty-eight patients received an Osteonics constrained acetabular implant for recurrent instability (46), girdlestone reimplant (8), correction of leg lengthening (3), and periprosthetic fracture (1). The constrained liner was inserted into a cementless shell (49), cemented into a pre-existing cementless shell (6), cemented into a cage (2), and cemented directly into the acetabular bone (1). Eight patients (13.8%) required reoperation for failure of the constrained implant. Type I failure (bone-prosthesis interface) occurred in 3 cases. Two cementless shells became loose, and in 1 patient, the constrained liner was cemented into an acetabular cage, which then failed by pivoting laterally about the superior fixation screws. Type II failure (liner locking mechanism) occurred in 2 cases. Type III failure (femoral head locking mechanism) occurred in 3 patients. Seven of the 8 failures occurred in patients with recurrent instability. Constrained liners are an effective method for treatment during revision total hip arthroplasty but should be used in select cases only.
2009-01-01
Introduction We report a case of sinusoidal obstruction syndrome, a typical and life-threatening complication after allogeneic stem-cell transplantation, successfully treated with defibrotide despite massive multiple organ failure. Case presentation A 64-year-old Caucasian woman underwent allogeneic peripheral blood stem-cell transplantation from her human leukocyte antigen-identical sister against aggressive lymphoplasmocytoid immunocytoma. Seven days later, the patient developed severe sinusoidal obstruction syndrome according to the modified Seattle criteria. We initiated treatment with defibrotide. Despite early treatment, multiple organ failure with kidney failure requiring dialysis and ventilator-dependent lung failure aggravated the clinical course. Furthermore, central nervous dysfunction occurred as well as transfusion refractory thrombocytopenia. Conclusion As highlighted in our report, defibrotide is the most promising drug in the treatment of the formerly, almost lethal, severe sinusoidal obstruction syndrome to date. This is demonstrated very clearly in our patient. She improved completely, even after renal, cerebral and respiratory failure. PMID:19830097
Institutional conditions for IWRM: the Israeli case.
Fischhendler, Itay
2008-01-01
Many places in the world are experiencing a water crisis. This water crisis is attributed to a governance crisis, whereas often fragmented institutional and physical water structures are used to explain a policy of overexploitation. The Israeli water system, which adopted integrated water resource management (IWRM), is often cited as a model for other countries struggling with fragmented water systems. Yet, despite the exceptional degree of integration, Israel in the past two decades has adopted an unsustainable water policy. The aim of this study is to understand this failure and thereby to postulate on the institutional conditions required for successful implementation of IWRM. The study focuses on the politics of water allocation during the drought of 1999 to 2002. It was found that the failure originates in setting administrative divisions in the decision-making process and in differential checks, with no balances implicitly instituted within the integrated water system. These two factors have resulted in a water system that is physically integrated but is not coupled by a balanced institutional structure. This case study teaches us that when reforming the water sector along IWRM lines, measures must be taken to ensure that the physical integration coincides with a balanced institutional integration-otherwise the results may be worse than if there were no integration at all.
Diseases causing end-stage renal failure in New South Wales.
Stewart, J H; McCarthy, S W; Storey, B G; Roberts, B A; Gallery, E; Mahony, J F
1975-01-01
The nature of the original renal disease was determined in 403 consecutive cases of end-stage renal failure, in 317 of which the clinical diagnosis was corroborated by histological examination of the kidney. Five diseases accounted for 20 or more cases--glomerulonephritis (31% of the total), analgesic nephropathy (29%), primary vesicoureteral reflux (8%), essential hypertension (6%), and polycystic kidneys (5%). In only four cases did renal failure result from chronic pyelonephritis without a demonstrable primary cause. Greater use of micturating cystography and cystoscopy and routine urine testing for salicylate are advocated for earlier diagnosis of the major causes of "pyelonephritis". The incidence of end-stage renal failure in people aged 15-55 in New South Wales was estimated to be at least 34 new cases per million of total population each year. PMID:1090338
2013-01-01
Introduction Polytrauma often results in significant hypoxemia secondary to direct lung contusion or indirectly through atelectasis, systemic inflammatory response, large volume fluid resuscitation and blood product transfusion. In addition to causing hypoxemia, atelectasis and acute lung injury can lead to right ventricular failure through an acute increase in pulmonary vascular resistance. Mechanical ventilation is often applied, accompanied with recruitment maneuvers and positive end-expiratory pressure in order to recruit alveoli and reverse atelectasis, while preventing excessive alveolar damage. This strategy should lead to the reversal of the hypoxemic condition and the detrimental heart–lung interaction that may occur. However, as described in this case report, hemodynamic instability and intractable alveolar atelectasis sometimes do not respond to conventional ventilation strategies. Case presentation We describe the case of a 21-year-old Caucasian man with severe chest trauma requiring surgical interventions, who developed refractory hypoxemia and overt right ventricular failure. After multiple failed attempts of recruitment using conventional ventilation, the patient was ventilated with high-frequency oscillatory ventilation. This mode of ventilation allowed the reversal of the hemodynamic effects of severe hypoxemia and of the acute cor pulmonale. We use this case report to describe the physiological advantages of high-frequency oscillatory ventilation in patients with chest trauma, and formulate the arguments to explain the positive effect observed in our patient. Conclusions High-frequency oscillatory ventilation can be used in the context of a blunt chest trauma accompanied by severe hypoxemia due to atelectasis. The positive effect is due to its capacity to recruit the collapsed alveoli and, as a result, the relief of increased pulmonary vascular resistance and subsequently the reversal of acute cor pulmonale. This approach may represent an alternative in case of failure of the conventional ventilation strategy. PMID:23855954
Failure to Obtain Computed Tomography Imaging in Head Trauma: A Review of Relevant Case Law.
Lindor, Rachel A; Boie, Eric T; Campbell, Ronna L; Hess, Erik P; Sadosty, Annie T
2015-12-01
The objectives were to describe lawsuits against providers for failing to order head computed tomography (CT) in cases of head trauma and to determine the potential effects of available clinical decision rules (CDRs) on each lawsuit. The authors collected jury verdicts, settlements, and court opinions regarding alleged malpractice for failure to order head CT in the setting of head trauma from 1972 through February 2014 from an online legal research tool (WestlawNext). Data were abstracted onto a standardized data form. The performance of five CDRs was evaluated. Sixty relevant cases were identified (52 adult, eight children). Of 48 cases with known outcomes, providers were found negligent in 10 cases (six adult, four pediatric), settled in 11 cases (nine adult, two pediatric), and were found not liable in 27 cases. In all 10 cases in which providers were found negligent, every applicable CDR studied would have indicated the need for head CT. In all eight cases involving children, the applicable CDR would have suggested the need for head CT or observation. A review of legal cases reported in a major online legal research system revealed 60 lawsuits in which providers were sued for failing to order head CTs in cases of head trauma. In all cases in which providers were found negligent, CT imaging or observation would have been indicated by every applicable CDR. © 2015 by the Society for Academic Emergency Medicine.
Digital Fly-By-Wire Flight Control Validation Experience
NASA Technical Reports Server (NTRS)
Szalai, K. J.; Jarvis, C. R.; Krier, G. E.; Megna, V. A.; Brock, L. D.; Odonnell, R. N.
1978-01-01
The experience gained in digital fly-by-wire technology through a flight test program being conducted by the NASA Dryden Flight Research Center in an F-8C aircraft is described. The system requirements are outlined, along with the requirements for flight qualification. The system is described, including the hardware components, the aircraft installation, and the system operation. The flight qualification experience is emphasized. The qualification process included the theoretical validation of the basic design, laboratory testing of the hardware and software elements, systems level testing, and flight testing. The most productive testing was performed on an iron bird aircraft, which used the actual electronic and hydraulic hardware and a simulation of the F-8 characteristics to provide the flight environment. The iron bird was used for sensor and system redundancy management testing, failure modes and effects testing, and stress testing in many cases with the pilot in the loop. The flight test program confirmed the quality of the validation process by achieving 50 flights without a known undetected failure and with no false alarms.
Data Applicability of Heritage and New Hardware for Launch Vehicle System Reliability Models
NASA Technical Reports Server (NTRS)
Al Hassan Mohammad; Novack, Steven
2015-01-01
Many launch vehicle systems are designed and developed using heritage and new hardware. In most cases, the heritage hardware undergoes modifications to fit new functional system requirements, impacting the failure rates and, ultimately, the reliability data. New hardware, which lacks historical data, is often compared to like systems when estimating failure rates. Some qualification of applicability for the data source to the current system should be made. Accurately characterizing the reliability data applicability and quality under these circumstances is crucial to developing model estimations that support confident decisions on design changes and trade studies. This presentation will demonstrate a data-source classification method that ranks reliability data according to applicability and quality criteria to a new launch vehicle. This method accounts for similarities/dissimilarities in source and applicability, as well as operating environments like vibrations, acoustic regime, and shock. This classification approach will be followed by uncertainty-importance routines to assess the need for additional data to reduce uncertainty.
Development of Integrated Assessment System for Underground Power Cable Performance: A Case Study
NASA Astrophysics Data System (ADS)
Turan, Faiz Mohd; Johan, Kartina; Soliha Sahimi, Nur; Nor, Nik Hisyamudin Muhd
2017-08-01
The basic operation of any electrical machines that is catered to serve needs of civilization involves electrical power which is the main source to trigger the internal mechanism in the machines then transfer the power to other form of energy such as mechanical, light, sound and etc. The supplies of electrical does not happen just by providing the source itself, it has load carrying agent which in many cases, user would refer to it as cable. Specifically, it is the power cable which its ampacity depends significantly on the operation temperature and load stress on it. Apart from having to focus on providing improvement on improving efficiency on the source itself, power cable plays and important role because without it, current ranging from low to high could not be transmitted and hence a failure of the power system generally. Studies have conducted to discuss whether which factor contributes relatively more to the causes of power cable failure or breakdown. Such factors can be narrowed down to the three major causes which are over temperature, over voltage and stress caused by over current. Over current is one of the factor which is depends on the usage of the power system itself. The higher the usage of the power system, higher the chances of over current to take place. This will then produce load stress on the cable which eventually destroy the insulator of the cable and slowly reach the core of the cable. It is believed that an assessment method should be implemented in order to predict the performance and failure rate of the power cable and use this prediction as reference rather than just letting power failure to happen anytime unpredictable which cause huge inconvenience to users and industries. Not only do a method should be implemented, it should be as easy to be used and understood by large range of users and integrated by a graphical user interface to be used. Therefore, this research will further narrow down on the approaches to do so and the location of studies involve Company M which is an agriculture industries which has higher usage on their own underground power cable. Moreover, in the past history the company experienced electrical power failure and this studies and findings will definitely come in hand to provide them necessary help and benefits.
Perlman, A; Heyman, S N; Matok, I; Stokar, J; Muszkat, M; Szalat, A
2017-12-01
Sodium-glucose-cotransporter-2 (SGLT2) inhibitors have recently been approved for the treatment of type II diabetes mellitus (T2DM). It has been proposed that these agents could induce acute renal failure (ARF) under certain conditions. This study aimed to evaluate the association between SGLT2-inhibitors and ARF in the FDA adverse event report system (FAERS) database. We analyzed adverse event cases submitted to FAERS between January 2013 and September 2016. ARF cases were identified using a structured medical query. Medications were identified using both brand and generic names. During the period evaluated, 18,915 reports (out of a total of 3,832,015 registered in FAERS) involved the use of SGLT2-inhibitors. SGLT2-inhibitors were reportedly associated with ARF in 1224 of these cases (6.4%), and were defined as the "primary" or "secondary" cause of the adverse event in 96.8% of these cases. The proportion of reports with ARF among reports with SGLT2 inhibitor was almost three-fold higher compared to reports without these drugs (ROR 2.88, 95% CI 2.71-3.05, p < 0.001). The proportion of ARF reports among cases with SGLT2-inhibitors was significantly greater than the proportion of ARF among cases with T2DM without SGLT2-inhibitors (ROR 1.68, 95% CI 1.57-1.8, p < 0.001). Among the SGLT2-inhibitors, canagliflozin was associated with a higher proportion of reports of renal failure (7.3%), compared to empagliflozin and dapagliflozin (4.7% and 4.8% respectively, p < 0.001). SGLT2-inhibitors are associated with an increase in the proportion of reports of ARF compared to other medications. SGLT2-inhibitor agents may differ from one another in their respective risk for ARF. Copyright © 2017 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.
[A case of fulminant hepatic failure secondary to hepatic metastasis of small cell lung carcinoma].
Hwang, Young Tae; Shin, Jung Woo; Lee, Jun Ho; Hwang, Dae Sung; Eum, Jun Bum; Choi, Hye Jeong; Park, Neung Hwa
2007-12-01
Although liver metastasis is commonly found in cancer patients, fulminant hepatic failure secondary to diffuse cancer infiltration into the liver is rare. Liver metastasis-induced fulminant hepatic failure has been reported in patients with primary cancer of the gastrointestinal tract, breast and uroepithelium, and in patients with melanoma and hematologic malignancy. Small cell lung cancer is so highly invasive that hepatic metastasis is common, but rapid progression to fulminant hepatic failure is extremely rare. We report here on a case of a patient who died because of rapid progression to fulminant hepatic failure as a result of hepatic metastasis of small cell lung carcinoma.
NASA Astrophysics Data System (ADS)
Hoskin, HLD; Furie, E.; Collins, W.; Ganey, TM; Schlatterer, DR
2017-05-01
Since Sir John Charnley began his monumental hip arthroplasty work in 1958, clinical researchers have been incrementally improving longevity and functionality of total joint systems, although implant failure occurs on occasion. The purpose of this study is to report the fracture of the humeral tray Morse taper of a reverse total shoulder system (RTSS), which to date has not been reported with metallurgic analysis for any RTSS. There was no reported antecedent fall, motor vehicle collision, or other traumatic event prior to implant fracture in this case. Analysis was performed on the retrieved failed implant by Scanning Electron Microscopy (SEM) and Electron Dispersion Spectroscopy (EDS) in an attempt to determine the failure method, as well as to offer improvements for future implants. At the time of revision surgery all explants were retained from the left shoulder of a 61-year old male who underwent a non-complicated RTSS 4 years prior. The explants, particularly the cracked humeral tray, were processed as required for SEM and EDS. Analysis was performed on the failure sites in order to determine the chemical composition of the different parts of the implant, discover the chemical composition of the filler metal used during the electron beam welding process, and to detect any foreign elements that could suggest corrosion or other evidence of failure etiology. Gross visual inspection of all explants revealed that implant failure was a result of dissociation of the taper from the humeral tray at the weld, leaving the Morse taper embedded in the humeral stem while the tray floated freely in the patient’s shoulder. SEM further confirmed the jagged edges noted grossly at the weld fracture site, both suggesting failure due to torsional forces. EDS detected elevated levels of carbon and oxygen at the fracture site on the taper only and not on the humeral tray. In order to determine the origin of the high levels of C and O, it was considered that in titanium alloys, C and O are used as stabilizers that help raise the temperature at which titanium can be cast. Since the presence of stabilizers reduces ductility and fatigue strength, all interstitial elements are removed after casting. Considering this, the presence of C and O suggests that not all of the interstitials were removed during the manufacturing process, resulting in decreased fatigue strength. Further destructive analytical testing would verify weld quality and failure mode. RTSSs are quite successful in select patients not amenable to traditional shoulder arthroplasty options. This case report highlights how an implant may function well for several years and then suddenly fail without warning. SEM and EDS analysis suggest that residual C and O in the taper lowered the metal implant’s integrity, leading to torsional cracking at the weld junction of the humeral tray and the taper. The elevated levels of C and O measured at fracture sites on both the tray and the taper suggest poor quality filler metal or failure to remove all interstitial elements after casting. In both cases, the results would be decreased fatigue strength and overall toughness, leading to mechanical failure. A manufacturer’s recall of all implants soon followed the reporting of this implant failure; subsequently, the metal materials were changed from Ti6Al4V to both titanium alloy and cobalt-chrome alloy (Co-Cr-Mo). Time will tell if the alterations were sufficient.
Kouamé-N'Takpé, N; Horo, K; Koné, A; N'guessan, K R; Touré, K; Kouadio, C; Assi, D; Coulibaly, I; Kouakou, A
2015-02-01
Multidrug-resistant tuberculosis (MDR-TB) is a major obsession for TB control. The main risk factor for MDR-TB remains a history of TB treatment especially bad conduct. The objective of this study is to describe the profile of patients in situations of failure and relapse of tuberculosis. We performed a retrospective survey of the analysis of records of patients starting TB retreatment for failure or relapse of tuberculosis. We used 193 cases with results of culture-sensitivity. The proportion of failure is 59/193 (30.6 %) and cases of relapse are 134/193 (69.4 %). The proportion of married life is 23.4 % (11/47) in chess against 41.5 % (51/123) in relapse of TB [P=0.021, OR=0.431 (0.201 to 0.927)]. Patients failing therapy have more chest pain [5.8 % (3/52) versus 0 % (0/126) with P=0.024]. The proportion of MDR-TB was 61.4 (38/59) in case of failure against 41 % (55/134) in case of relapse [P=0.002, OR=2.599 (1.378 to 4.902)]. The evolution is the same whatever the indication of reprocessing. The proportion of MDR-TB is very important in case of reprocessing failure and relapse of tuberculosis. Copyright © 2014 Elsevier Masson SAS. All rights reserved.
Okayasu, Hiroaki; Shinozaki, Takahiro; Osone, Akira; Ozeki, Yuji; Shimoda, Kazutaka
2014-03-29
Cases of acute pancreatitis caused by sodium valproate (VPA) have been reported by many authors thus far. However, most of these were cases with epilepsy. Chronic renal failure is also regarded as a risk factor for acute pancreatitis. Here, we report a case of acute pancreatitis development due to VPA in a patient with bipolar disorder on hemodialysis for chronic renal failure. The patient was a 52-year-old Japanese male who was diagnosed as bipolar disorder on hemodialysis for renal failure. He was treated with VPA and manic symptoms gradually stabilized. However, the patient complained of severe abdominal pain. Blood amylase was found to be markedly high, and computed tomography revealed pancreatomegaly and an increased amount of peripancreatic fat. Hence, we diagnosed the case as acute pancreatitis caused by VPA. We discontinued oral medication, and he was started on a pancreatic enzyme inhibitor, antibiotics, and transfusion, and he showed improvement. It has been reported that acute pancreatitis induced by VPA is caused by intermediate metabolites of VPA. We consider that patients with renal failure are prone to pancreatitis caused by VPA because of the accumulation of these intermediate metabolites. We need close monitoring for serious adverse effects such as pancreatitis when we prescribe VPA to patients with bipolar disorder on hemodialysis for chronic renal failure, although VPA is safer than other mood stabilizers.
Sax, U.; Lipprandt, M.
2016-01-01
Summary Introduction As many medical workflows depend vastly on IT support, great demands are placed on the availability and accuracy of the applications involved. The cases of IT failure through ransomware at the beginning of 2016 are impressive examples of the dependence of clinical processes on IT. Although IT risk management attempts to reduce the risk of IT blackouts, the probability of partial/total data loss, or even worse, data falsification, is not zero. The objective of this paper is to present the state of the art with respect to strategies, processes, and governance to deal with the failure of IT systems. Methods This article is conducted as a narrative review. Results Worst case scenarios are needed, dealing with methods as to how to survive the downtime of clinical systems, for example through alternative workflows. These workflows have to be trained regularly. We categorize the most important types of IT system failure, assess the usefulness of classic counter measures, and state that most risk management approaches fall short on exactly this matter. Conclusion To ensure that continuous, evidence-based improvements to the recommendations for IT emergency concepts are made, it is essential that IT blackouts and IT disasters are reported, analyzed, and critically discussed. This requires changing from a culture of shame and blame to one of error and safety in healthcare IT. This change is finding its way into other disciplines in medicine. In addition, systematically planned and analyzed simulations of IT disaster may assist in IT emergency concept development. PMID:27830241
Sax, Ulrich; Lipprandt, M; Röhrig, R
2016-11-10
As many medical workflows depend vastly on IT support, great demands are placed on the availability and accuracy of the applications involved. The cases of IT failure through ransomware at the beginning of 2016 are impressive examples of the dependence of clinical processes on IT. Although IT risk management attempts to reduce the risk of IT blackouts, the probability of partial/total data loss, or even worse, data falsification, is not zero. The objective of this paper is to present the state of the art with respect to strategies, processes, and governance to deal with the failure of IT systems. This article is conducted as a narrative review. Worst case scenarios are needed, dealing with methods as to how to survive the downtime of clinical systems, for example through alternative workflows. These workflows have to be trained regularly. We categorize the most important types of IT system failure, assess the usefulness of classic counter measures, and state that most risk management approaches fall short on exactly this matter. To ensure that continuous, evidence-based improvements to the recommendations for IT emergency concepts are made, it is essential that IT blackouts and IT disasters are reported, analyzed, and critically discussed. This requires changing from a culture of shame and blame to one of error and safety in healthcare IT. This change is finding its way into other disciplines in medicine. In addition, systematically planned and analyzed simulations of IT disaster may assist in IT emergency concept development.
Arvanitoyannis, Ioannis S; Varzakas, Theodoros H
2008-05-01
The Failure Mode and Effect Analysis (FMEA) model was applied for risk assessment of salmon manufacturing. A tentative approach of FMEA application to the salmon industry was attempted in conjunction with ISO 22000. Preliminary Hazard Analysis was used to analyze and predict the occurring failure modes in a food chain system (salmon processing plant), based on the functions, characteristics, and/or interactions of the ingredients or the processes, upon which the system depends. Critical Control points were identified and implemented in the cause and effect diagram (also known as Ishikawa, tree diagram and fishbone diagram). In this work, a comparison of ISO 22000 analysis with HACCP is carried out over salmon processing and packaging. However, the main emphasis was put on the quantification of risk assessment by determining the RPN per identified processing hazard. Fish receiving, casing/marking, blood removal, evisceration, filet-making cooling/freezing, and distribution were the processes identified as the ones with the highest RPN (252, 240, 210, 210, 210, 210, 200 respectively) and corrective actions were undertaken. After the application of corrective actions, a second calculation of RPN values was carried out resulting in substantially lower values (below the upper acceptable limit of 130). It is noteworthy that the application of Ishikawa (Cause and Effect or Tree diagram) led to converging results thus corroborating the validity of conclusions derived from risk assessment and FMEA. Therefore, the incorporation of FMEA analysis within the ISO 22000 system of a salmon processing industry is anticipated to prove advantageous to industrialists, state food inspectors, and consumers.
Using Student Conferences to Increase Participation in the Classroom: A Case Study
ERIC Educational Resources Information Center
Arenas, M. G.; Castillo, P. A.; de Vega, F. F.; Merelo, J. J.
2012-01-01
This paper describes the use of a student conference as a novel experience aimed at motivating students enrolled in various computer architecture courses, such as Microprocessor Systems. The goal was to increase student engagement, to decrease failure rates, and to introduce students to the world of research. This multidisciplinary experience…
Revista de Investigacion Educativa, 1998 (Journal of Educational Research, 1998).
ERIC Educational Resources Information Center
Revista de Investigacion Educativa, 1998
1998-01-01
Articles in this volume focus on the following: specialized research; methodological challenges; establishment of a categorization system for sociometric analysis and its application in the multicultural classroom; a case study of factors to prevent school failure in children at risk; the KeyMatch-R scale (study of a curriculum-related diagnostic…
76 FR 51274 - Supplemental Nutrition Assistance Program: Major System Failures
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-18
... data mining as necessary to determine if losses are occurring in the process of issuing benefits. It is... further by using data mining techniques on States' data or analyzing QC data for error patterns that may... conjunction with an additional sample of cases. Data mining techniques may be employed when QC data cannot...
Park-Wyllie, Laura; van Stralen, Judy; Castillon, Genaro; Sherman, Stephen E; Almagor, Doron
2017-10-01
Our study evaluated adverse events of therapeutic failure (and specifically reduced duration of action) with the use of a branded product, Osmotic Release Oral System (OROS) methylphenidate, which is approved for the treatment of attention deficit/hyperactivity disorder, and a generic product (methylphenidate, methylphenidate ER-C), which was approved for marketing in Canada based on bioequivalence to OROS methylphenidate. This study was initiated following reports that some US-marketed generic methylphenidate ER products had substantially higher reporting rates of therapeutic failure than did the referenced brands. Through methodology similar to that used by the US Food and Drug Administration to investigate the issue with the US-marketed generic, reporting rates were calculated from cases of therapeutic failure identified in the Canadian Vigilance Adverse Reaction Online database for a 1-year period beginning 8 months after each product launch. Corresponding population exposure was estimated from the number of tablets dispensed. An in-depth analysis of narratives of individual case safety reports (ICSRs) with the use of the generic product was conducted in duplicate by 2 physicians to assess causality and to characterize the potential safety risk and clinical pattern of therapeutic failure. Similar secondary analyses were conducted on the US-marketed products. Reporting rates of therapeutic failure with the use of methylphenidate ER-C (generic) and OROS methylphenidate (brand name) were 411.5 and 37.5 cases per 100,000 patient-years, respectively (reporting rate ratio, 10.99; 95% CI, 5.93-22.21). In-depth analysis of narratives of 230 ICSRs of therapeutic failure with the Canadian-marketed generic determined that all ICSRs were either probably (60 [26%]) or possibly (170 [74%]) causally related to methylphenidate ER-C. Clinical symptoms suggestive of overdose were present in 31 reports of loss of efficacy (13.5%) and occurred primarily in the morning, and premature loss of efficacy (shorter duration of action) was described in 98 cases (42.6%) and occurred primarily in the afternoon. Impacts on social functioning, such as disruption in work or school performance or adverse social behaviors, were found in 51 cases (22.2%). The ~10-fold higher reporting rate of therapeutic failure with the generic product relative to its reference product in the present Canadian study resembles findings with US-marketed generic products. While these results should be interpreted with caution due to the limitations of spontaneous adverse event reporting, which may confound comparisons across products, similar findings nonetheless led the US Food and Drug Administration to declare in 2014 that 2 methylphenidate ER generic products in the United States were neither bioequivalent nor interchangeable with OROS methylphenidate-their reference product. Our results indicate a potential safety issue with the Canadian-marketed generic and suggest a need for further investigation by Health Canada. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Belmonte, D.; Vedova, M. D. L. Dalla; Ferro, C.; Maggiore, P.
2017-06-01
The proposal of prognostic algorithms able to identify precursors of incipient failures of primary flight command electromechanical actuators (EMA) is beneficial for the anticipation of the incoming failure: an early and correct interpretation of the failure degradation pattern, in fact, can trig an early alert of the maintenance crew, who can properly schedule the servomechanism replacement. An innovative prognostic model-based approach, able to recognize the EMA progressive degradations before his anomalous behaviors become critical, is proposed: the Fault Detection and Identification (FDI) of the considered incipient failures is performed analyzing proper system operational parameters, able to put in evidence the corresponding degradation path, by means of a numerical algorithm based on spectral analysis techniques. Subsequently, these operational parameters will be correlated with the actual EMA health condition by means of failure maps created by a reference monitoring model-based algorithm. In this work, the proposed method has been tested in case of EMA affected by combined progressive failures: in particular, partial stator single phase turn to turn short-circuit and rotor static eccentricity are considered. In order to evaluate the prognostic method, a numerical test-bench has been conceived. Results show that the method exhibit adequate robustness and a high degree of confidence in the ability to early identify an eventual malfunctioning, minimizing the risk of fake alarms or unannounced failures.
Aregu, Lemlem; Darnhofer, Ika; Tegegne, Azage; Hoekstra, Dirk; Wurzinger, Maria
2016-12-01
We studied how the failure to take into account gendered roles in the management of a communal pasture can affect the resilience of this social-ecological system. Data were collected using qualitative methods, including focus group discussions, in-depth interviews, and participant observations from one community in the highlands of Ethiopia. The results show that women are excluded from the informal institution that defines the access and use rules which guide the management of the communal pasture. Consequently, women's knowledge, preferences, and needs are not taken into account. This negatively affects the resilience of the communal pasture in two ways. Firstly, the exclusion of women's knowledge leads to future adaptation options being overlooked. Secondly, as a result of the failure to address women's needs, they start to question the legitimacy of the informal institution. The case study thus shows how excluding women, i.e., side-lining their knowledge and needs, weakens social learning and the adaptiveness of the management rules. Being blind to gender-related issues may thus undermine the resilience of a social-ecological system.
NASA Astrophysics Data System (ADS)
Zagrebaev, A. M.; Ramazanov, R. N.; Lunegova, E. A.
2017-01-01
In this paper we consider the optimization problem minimize of the energy loss of nuclear power plants in case of partial in-core monitoring system failure. It is possible to continuation of reactor operation at reduced power or total replacement of the channel neutron measurements, requiring shutdown of the reactor and the stock of detectors. This article examines the reconstruction of the energy release in the core of a nuclear reactor on the basis of the indications of height sensors. The missing measurement information can be reconstructed by mathematical methods, and replacement of the failed sensors can be avoided. It is suggested that a set of ‘natural’ functions determined by means of statistical estimates obtained from archival data be constructed. The procedure proposed makes it possible to reconstruct the field even with a significant loss of measurement information. Improving the accuracy of the restoration of the neutron flux density in partial loss of measurement information to minimize the stock of necessary components and the associated losses.
Nephrogenic Systemic Fibrosis Manifesting a Decade After Exposure to Gadolinium.
Larson, Krista N; Gagnon, Amy L; Darling, Melissa D; Patterson, James W; Cropley, Thomas G
2015-10-01
Nephrogenic systemic fibrosis (NSF) is a fibrosing skin disorder that develops in patients with kidney failure and has been linked to exposure to gadolinium-containing contrast agents. The time between exposure to gadolinium and the initial presentation of NSF is typically weeks to months but has been documented to be as long as 3½ years. We report a case of NSF developing 10 years after exposure to gadolinium. A long-term hemodialysis patient was exposed to gadolinium several times between 1998 and 2004 during magnetic resonance angiography of his abdominal vessels and arteriovenous fistula. In 2014, he was seen at our clinic with new dermal papules and plaques. Biopsy of affected skin showed thickening of collagen, CD34+ spindle cells, and increased mucin in the dermis, supporting the diagnosis of NSF. The clinical history and histopathological features of this case support the diagnosis of NSF 10 years after exposure to gadolinium. Although the use of gadolinium contrast agents in patients with kidney failure has markedly decreased, patients with exposure to gadolinium years to decades previously may manifest the disease.
Probabilistic failure assessment with application to solid rocket motors
NASA Technical Reports Server (NTRS)
Jan, Darrell L.; Davidson, Barry D.; Moore, Nicholas R.
1990-01-01
A quantitative methodology is being developed for assessment of risk of failure of solid rocket motors. This probabilistic methodology employs best available engineering models and available information in a stochastic framework. The framework accounts for incomplete knowledge of governing parameters, intrinsic variability, and failure model specification error. Earlier case studies have been conducted on several failure modes of the Space Shuttle Main Engine. Work in progress on application of this probabilistic approach to large solid rocket boosters such as the Advanced Solid Rocket Motor for the Space Shuttle is described. Failure due to debonding has been selected as the first case study for large solid rocket motors (SRMs) since it accounts for a significant number of historical SRM failures. Impact of incomplete knowledge of governing parameters and failure model specification errors is expected to be important.
Does an inter-flaw length control the accuracy of rupture forecasting in geological materials?
NASA Astrophysics Data System (ADS)
Vasseur, Jérémie; Wadsworth, Fabian B.; Heap, Michael J.; Main, Ian G.; Lavallée, Yan; Dingwell, Donald B.
2017-10-01
Multi-scale failure of porous materials is an important phenomenon in nature and in material physics - from controlled laboratory tests to rockbursts, landslides, volcanic eruptions and earthquakes. A key unsolved research question is how to accurately forecast the time of system-sized catastrophic failure, based on observations of precursory events such as acoustic emissions (AE) in laboratory samples, or, on a larger scale, small earthquakes. Until now, the length scale associated with precursory events has not been well quantified, resulting in forecasting tools that are often unreliable. Here we test the hypothesis that the accuracy of the forecast failure time depends on the inter-flaw distance in the starting material. We use new experimental datasets for the deformation of porous materials to infer the critical crack length at failure from a static damage mechanics model. The style of acceleration of AE rate prior to failure, and the accuracy of forecast failure time, both depend on whether the cracks can span the inter-flaw length or not. A smooth inverse power-law acceleration of AE rate to failure, and an accurate forecast, occurs when the cracks are sufficiently long to bridge pore spaces. When this is not the case, the predicted failure time is much less accurate and failure is preceded by an exponential AE rate trend. Finally, we provide a quantitative and pragmatic correction for the systematic error in the forecast failure time, valid for structurally isotropic porous materials, which could be tested against larger-scale natural failure events, with suitable scaling for the relevant inter-flaw distances.
Infective endocarditis in Ethiopian children: a hospital based review of cases in Addis Ababa.
Moges, Tamirat; Gedlu, Etsegenet; Isaakidis, Petros; Kumar, Ajay; Van Den Berge, Rafael; Khogali, Mohammed; Mekasha, Amha; Hinderaker, Sven Gudmund
2015-01-01
Infective endocarditis is an infection of the endocardial lining of the heart mainly associated with congenital and rheumatic heart disease. Although it is a rare disease in children, it is associated with high morbidity and mortality; death due to infective endocarditis has been reported to be as high as 26% in sub-Saharan Africa. This was a retrospective review of routinely collected data from patient records. A total of 40 children (71% female) with 41 episodes of infective endocarditis admitted to a general paediatric ward in Addis Ababa, Ethiopia between 2008 and 2013. Age ranged from 7 months to 14 years, with a median of 9 years (Inter quartile Range: 7-12 years). Rheumatic and congenital heart diseases were underlying risk factors in 49% and 51% of cases respectively. Congestive heart failure, systemic embolization and death occurred in 66%, 12% and 7.3% respectively. Death was associated with the occurrence of systemic embolization (P-value=0.03). Rheumatic heart disease was an important predisposing factor for infective endocarditis in Ethiopian children. Late presentations of cases were evidenced by high proportion of complications such as congestive heart failure. A low rate of clinically evident systemic embolization in this study may be a reflection of the diagnostic challenges. High proportion of prior antibiotic intake might explain the cause of significant BCNE. Preventive measures like primary and secondary prophylaxis of rheumatic fever may decrease the associated morbidity and mortality. Early detection and referral of cases, awareness creation about indiscriminate use of antimicrobials, and proper history taking and documentation of information recommended.
NASA Technical Reports Server (NTRS)
Onwubiko, Chin-Yere; Onyebueke, Landon
1996-01-01
Structural failure is rarely a "sudden death" type of event, such sudden failures may occur only under abnormal loadings like bomb or gas explosions and very strong earthquakes. In most cases, structures fail due to damage accumulated under normal loadings such as wind loads, dead and live loads. The consequence of cumulative damage will affect the reliability of surviving components and finally causes collapse of the system. The cumulative damage effects on system reliability under time-invariant loadings are of practical interest in structural design and therefore will be investigated in this study. The scope of this study is, however, restricted to the consideration of damage accumulation as the increase in the number of failed components due to the violation of their strength limits.
Spacecraft System Failures and Anomalies Attributed to the Natural Space Environment
NASA Technical Reports Server (NTRS)
Bedingfield, Keith, L.; Leach, Richard D.; Alexander, Margaret B. (Editor)
1996-01-01
The natural space environment is characterized by many complex and subtle phenomena hostile to spacecraft. The effects of these phenomena impact spacecraft design, development, and operations. Space systems become increasingly susceptible to the space environment as use of composite materials and smaller, faster electronics increases. This trend makes an understanding of the natural space environment essential to accomplish overall mission objectives, especially in the current climate of better/cheaper/faster. This primer provides a brief overview of the natural space environment - definition, related programmatic issues, and effects on various spacecraft subsystems. The primary focus, however, is to catalog, through representative case histories, spacecraft failures and anomalies attributed to the natural space environment. This primer is one in a series of NASA Reference Publications currently being developed by the Electromagnetics and Aerospace Environments Branch, Systems Analysis and Integration Laboratory, Marshall Space Flight Center (MSFC), National Aeronautics and Space Administration (NASA).
A Rare Case Report of Neurodegenerative Disease: Duchenne Muscular Dystrophy in Two Male Siblings
Suneja, B; Suneja, ES; Chandna, P
2015-01-01
ABSTRACT Duchenne muscular dystrophy (DMD) is an recessive X-linked mediated, musculoskeletal disorder that affects only males. It is the most common and severe form of muscular dystrophy where there is failure to manufacture dystrophin. Clinically, it is characterized by progressive muscle wasting eventually leading to premature death. This case report describes the genetic, oral and systemic findings in two cases of DMD in male siblings. How to cite this article: Suneja B, Suneja ES, Adlakha VK, Chandna P. A Rare Case Report of Neurodegenerative Disease: Duchenne Muscular Dystrophy in Two Male Siblings. Int J Clin Pediatr Dent 2015;8(2):163-165. PMID:26379389
Gill, Sudeep S; Bronskill, Susan E; Paterson, J Michael; Whitehead, Marlo
2012-01-01
Objective To assess the risk of systemic adverse events associated with intravitreal injections of vascular endothelial growth factor inhibiting drugs. Design Population based nested case-control study. Setting Ontario, Canada. Participants 91 378 older adults with a history of physician diagnosed retinal disease identified between 1 April 2006 and 31 March 2011. Cases were 1477 patients admitted to hospital for ischaemic stroke, 2229 admitted for an acute myocardial infarction, 1059 admitted or assessed in an emergency department for venous thromboembolism, and 2623 admitted for congestive heart failure. Event-free controls (at a ratio of 5:1) were matched to cases on the basis of year of birth, sex, history of the outcome in the previous 5 years, and diabetes. Main exposure measure Exposure to vascular endothelial growth factor inhibiting drugs identified within 180 days before the index date. Results After adjustment for potential confounders, participants who had ischaemic stroke, acute myocardial infarction, congestive heart failure, or venous thromboembolism were not more likely than control participants to have been exposed to either bevacizumab (adjusted odds ratios of 0.95 (95% confidence interval 0.68 to 1.34) for ischaemic stroke, 1.04 (0.77 to 1.39) for acute myocardial infarction, 0.81 (0.49 to 1.34) for venous thromboembolism, and 1.21 (0.91 to 1.62) for congestive heart failure) or ranibizumab (adjusted odds ratios 0.87 (0.68 to 1.10) for ischaemic stroke, 0.90 (0.72 to 1.11) for acute myocardial infarction, 0.88 (0.67 to 1.16) for venous thromboembolism, and 0.87 (0.70 to 1.07) for congestive heart failure). Similarly, a secondary analysis of exclusive users of bevacizumab or ranibizumab showed no differences in risk between the two drugs (adjusted odds ratios for bevacizumab relative to ranibizumab of 1.03 (0.67 to 1.60) for ischaemic stroke, 1.23 (0.85 to 1.77) for acute myocardial infarction, 0.92 (0.51 to 1.69) for venous thromboembolism, and 1.35 (0.93 to 1.95) for congestive heart failure). These findings were consistent for all but one outcome in subgroup analyses. Conclusions Intravitreal injections of bevacizumab and ranibizumab were not associated with significant risks of ischaemic stroke, acute myocardial infarction, congestive heart failure, or venous thromboembolism. PMID:22763393
"SWING": A European project for a new application of an ionospheric network
NASA Astrophysics Data System (ADS)
Zolesi, B.; Bianchi, C.; Meloni, A.; Baskaradas, J. A.; Belehaki, A.; Altadill, D.; Dalle Mese, E.
2016-05-01
The SWING (Short Wave critical Infrastructure Network based on a new Generation high survival radio communication system) is a European project aimed at studying a high survival high-frequency (HF) radio network to link European Critical Infrastructures (ECIs). This system is thought to replace broadband internet communication, maintaining the minimum flux of essential information for the ECIs management and control, in case of wide-scale threats, including terrorist attacks, able to put out of order internet links over the Mediterranean region. SWING is designed to evaluate the threat and increase the security awareness, as well as the level of protection, of analogous and/or interdependent ECIs. In order to meet these goals, SWING was finalized to recognize how and when the internet communication fails and to develop the standard software and hardware tools necessary for implementing communication protocols suited for a reliable and interoperable short-wave (SW) or high-frequency (HF) radio network backup. The internet broadband description and internet failure recognition were taken into consideration in the project but are not treated in this paper. It has been assessed that in case of complete failure of the internet broadband communication fundamental information for the management and control of ECIs over the Mediterranean region can be maintained with a HF network, even in case of moderate ionospheric perturbations.
Improving the driver-automation interaction: an approach using automation uncertainty.
Beller, Johannes; Heesen, Matthias; Vollrath, Mark
2013-12-01
The aim of this study was to evaluate whether communicating automation uncertainty improves the driver-automation interaction. A false system understanding of infallibility may provoke automation misuse and can lead to severe consequences in case of automation failure. The presentation of automation uncertainty may prevent this false system understanding and, as was shown by previous studies, may have numerous benefits. Few studies, however, have clearly shown the potential of communicating uncertainty information in driving. The current study fills this gap. We conducted a driving simulator experiment, varying the presented uncertainty information between participants (no uncertainty information vs. uncertainty information) and the automation reliability (high vs.low) within participants. Participants interacted with a highly automated driving system while engaging in secondary tasks and were required to cooperate with the automation to drive safely. Quantile regressions and multilevel modeling showed that the presentation of uncertainty information increases the time to collision in the case of automation failure. Furthermore, the data indicated improved situation awareness and better knowledge of fallibility for the experimental group. Consequently, the automation with the uncertainty symbol received higher trust ratings and increased acceptance. The presentation of automation uncertaintythrough a symbol improves overall driver-automation cooperation. Most automated systems in driving could benefit from displaying reliability information. This display might improve the acceptance of fallible systems and further enhances driver-automation cooperation.
Independent Orbiter Assessment (IOA): FMEA/CIL assessment
NASA Technical Reports Server (NTRS)
Saiidi, Mo J.; Swain, L. J.; Compton, J. M.
1988-01-01
The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. Direction was given by the Orbiter and GFE Projects Office to perform the hardware analysis and assessment using the instructions and ground rules defined in NSTS 22206. The IOA analysis features a top-down approach to determine hardware failure modes, criticality, and potential critical items. To preserve independence, the anlaysis was accomplished without reliance upon the results contained within the NASA and prime contractor FMEA/CIL documentation. The assessment process compares the independently derived failure modes and criticality assignments to the proposed NASA Post 51-L FMEA/CIL documentation. When possible, assessment issues are discussed and resolved with the NASA subsystem managers. The assessment results for each subsystem are summarized. The most important Orbiter assessment finding was the previously unknown stuck autopilot push-button criticality 1/1 failure mode, having a worst case effect of loss of crew/vehicle when a microwave landing system is not active.
NASA Astrophysics Data System (ADS)
Zhang, Bin; Deng, Congying; Zhang, Yi
2018-03-01
Rolling element bearings are mechanical components used frequently in most rotating machinery and they are also vulnerable links representing the main source of failures in such systems. Thus, health condition monitoring and fault diagnosis of rolling element bearings have long been studied to improve operational reliability and maintenance efficiency of rotatory machines. Over the past decade, prognosis that enables forewarning of failure and estimation of residual life attracted increasing attention. To accurately and efficiently predict failure of the rolling element bearing, the degradation requires to be well represented and modelled. For this purpose, degradation of the rolling element bearing is analysed with the delay-time-based model in this paper. Also, a hybrid feature selection and health indicator construction scheme is proposed for extraction of the bearing health relevant information from condition monitoring sensor data. Effectiveness of the presented approach is validated through case studies on rolling element bearing run-to-failure experiments.
Impact Processes in the Solar System
NASA Technical Reports Server (NTRS)
Ahrens, Thomas J.
2004-01-01
Our laboratory has previously conducted impact fracture and dynamic failure tests. Polanskey and Ahrens [1990] mapped the fractures from a series of laboratory craters (Fig. 1) and Ahrens and Rubin [ 1993] inferred that the usually further extending radial cracks resulted from tensional failure during the compression of the shock propagation. The radial spreading induced by the particle velocity field caused the stresses perpendicular to the shock front to become sufficiently large and tensile. This induces "radial fractures." The concentric fractures are attributed to the tensional failure occurring after the initial compressive phase. Upon radial propagation of the stress wave the negative tension behind the stress-wave front caused failure along the quasi-spherical concentric fractures. The near-surface and spall fractures are attributed to the fractures described by Melosh [1984]. These are activated by impact and can launch relatively unshocked samples of planetary surfaces to speeds exceeding escape velocity. In the case of Mars, some of these surface samples presumably become the SNC (Mars) meteorites.
Transition wave in the collapse of the San Saba bridge
NASA Astrophysics Data System (ADS)
Brun, Michele; Giaccu, Gian Felice; Movchan, Alexander; Slepyan, Leonid
2014-09-01
A domino wave is a well-known illustration of a transition wave, which appears to reach a stable regime of propagation. Nature also provides spectacular cases of gravity driven transition waves at large scale, observed in snow avalanches and landslides. On a different scale, the micro-structure level interaction between different constituents of the macro-system may influence critical regimes leading to instabilities in avalanche-like flow systems. Most transition waves observed in systems such as bulletproof vests, racing helmets under impact, shock-wave driven fracture in solids, are transient. For some structured waveguides a transition wave may stabilize to achieve a steady regime. Here we show that the failure of a long bridge is also driven by a transition wave that may allow for steady-state regimes. The recent observation of a failure of the San Saba Bridge in Texas provides experimental evidence supporting an elegant theory based on the notion of transition failure wave. No one would think of an analogy between a snow avalanche and a collapsing bridge. Despite an apparent controversy of such a comparison, these two phenomena can both be described in the framework of a model of the dynamic gravity driven transition fault.
Flexible Case - Grain Interaction in Ballistic Weapon Systems. Volume I. Technical Accomplishments.
1976-10-01
Summary of Test Measurements for Motor No. 2 K-i Appendix I Software Documentation and User ’s Manual L-1 Multiplexor Driver Program for the F Varian...the - .4 case. Thus, any force applied to the steel pl ug causes a slight deflectionof the strain gaged element that can be interpreted as a stress...were extruded by manual pressure.The failure gages were installed in a similar manner with the exception that they were bonded in place with standard AGC
Electrical Pressurization Concept for the Orion MPCV European Service Module Propulsion System
NASA Technical Reports Server (NTRS)
Meiss, Jan-Hendrik; Weber, Jorg; Ierardo, Nicola; Quinn, Frank D.; Paisley, Jonathan
2015-01-01
The paper presents the design of the pressurization system of the European Service Module (ESM) of the Orion Multi-Purpose Crew Vehicle (MPCV). Being part of the propulsion subsystem, an electrical pressurization concept is implemented to condition propellants according to the engine needs via a bang-bang regulation system. Separate pressurization for the oxidizer and the fuel tank permits mixture ratio adjustments and prevents vapor mixing of the two hypergolic propellants during nominal operation. In case of loss of pressurization capability of a single side, the system can be converted into a common pressurization system. The regulation concept is based on evaluation of a set of tank pressure sensors and according activation of regulation valves, based on a single-failure tolerant weighting of three pressure signals. While regulation is performed on ESM level, commanding of regulation parameters as well as failure detection, isolation and recovery is performed from within the Crew Module, developed by Lockheed Martin Space System Company. The overall design and development maturity presented is post Preliminary Design Review (PDR) and reflects the current status of the MPCV ESM pressurization system.
Akıncı, Burcu; Siviş, Zuhal Ö; Şahin, Akkız; Karapınar, Deniz Y; Balkan, Can; Kavaklı, Kaan; Aydınok, Yeşim
2018-06-01
Toxic epidermal necrolysis and Stevens-Johnson syndrome are rare mucocutaneous diseases which are associated with a prolonged course and potentially lethal outcome. They are mostly drug induced and mortality rates are very high. Although mostly skin is involved, multiple organ systems such as cardiovascular, pulmonary, gastrointestinal, and urinary systems may be affected. Here, we report a case of Stevens- Johnson Syndrome associated with methotrexate treatment who developed acute cardiac failure and gastrointestinal hemorrhage beside skin findings. He had been treated with intravenous immunglobulin and methylprednisolone succesfully and continued chemotherapy with methotrexate treatment again. Sociedad Argentina de Pediatría.
Common Cause Failures and Ultra Reliability
NASA Technical Reports Server (NTRS)
Jones, Harry W.
2012-01-01
A common cause failure occurs when several failures have the same origin. Common cause failures are either common event failures, where the cause is a single external event, or common mode failures, where two systems fail in the same way for the same reason. Common mode failures can occur at different times because of a design defect or a repeated external event. Common event failures reduce the reliability of on-line redundant systems but not of systems using off-line spare parts. Common mode failures reduce the dependability of systems using off-line spare parts and on-line redundancy.
Intelligent failure-tolerant control
NASA Technical Reports Server (NTRS)
Stengel, Robert F.
1991-01-01
An overview of failure-tolerant control is presented, beginning with robust control, progressing through parallel and analytical redundancy, and ending with rule-based systems and artificial neural networks. By design or implementation, failure-tolerant control systems are 'intelligent' systems. All failure-tolerant systems require some degrees of robustness to protect against catastrophic failure; failure tolerance often can be improved by adaptivity in decision-making and control, as well as by redundancy in measurement and actuation. Reliability, maintainability, and survivability can be enhanced by failure tolerance, although each objective poses different goals for control system design. Artificial intelligence concepts are helpful for integrating and codifying failure-tolerant control systems, not as alternatives but as adjuncts to conventional design methods.
Update on the Management of High-Risk Penetrating Keratoplasty.
Jabbehdari, Sayena; Rafii, Alireza Baradaran; Yazdanpanah, Ghasem; Hamrah, Pedram; Holland, Edward J; Djalilian, Ali R
2017-03-01
In this article, we review the indications and latest management of high-risk penetrating keratoplasty. Despite the immune-privilege status of the cornea, immune-mediated graft rejection still remains the leading cause of corneal graft failure. This is particularly a problem in the high-risk graft recipients, namely patients with previous graft failure due to rejection and those with inflamed and vascularized corneal beds. A number of strategies including both local and systemic immunosuppression are currently used to increase the success rate of high-risk corneal grafts. Moreover, in cases of limbal stem cell deficiency, limbal stem cells transplantation is employed. Corticosteroids are still the top medication for prevention and treatment in cases of corneal graft rejection. Single and combined administration of immunosuppressive agents e.g. tacrolimus, cyclosporine and mycophenolate are promising adjunctive therapies for prolonging graft survival. In the future, cellular and molecular therapies should allow us to achieve immunologic tolerance even in high-risk grafts.
Vibrations of beams and rods carrying a moving mass
NASA Astrophysics Data System (ADS)
Zhao, X. W.; van der Heijden, G. H. M.; Hu, Z. D.
2016-05-01
We study the vibration of slender one-dimensional elastic structures (beams, cables, wires, rods) under the effect of a moving mass or load. We first consider the classical small- deflection (Euler-Bernoulli) beam case, where we look at tip vibrations of a cantilever as a model for a barreled launch system. Then we develop a theory for large deformations based on Cosserat rod theory. We illustrate the effect of moving loads on large-deformation structures with a few cable and arch problems. Large deformations are found to have a resonance detuning effect on the cable. For the arch we find different failure modes depending on its depth: a shallow arch fails by in-plane collapse, while a deep arch fails by sideways flopping. In both cases the speed of the traversing load is found to have a stabilising effect on the structure, with failure suppressed entirely at sufficiently high speed.
Benefits assessment of active control technology and related cockpit technology for rotorcraft
NASA Technical Reports Server (NTRS)
Hampton, B. J.
1982-01-01
Two main-rotor active control concepts, one incorporating multicyclic actuators located just below the swashplate, and the other providing for the actuators and power supplies to be located in the rotating frame are considered. Each design concept is integrated with cockpit controllers and displays appropriate to the actuation concept in each case. The benefits of applying the defined ACT/RCT concepts to rotorcraft are quantified by comparison to the baseline model 412 helicopter. These benefits include, in the case of one active control concept; (1) up to 91% reduction in 4/rev hub shears; (2) a flight safety failure rate of 1.96 x 10 to the 8th power failures per flight-hour; (3) rotating controls/rotor hub drag reduction of 40%; (4) a 9% reduction in control system weight; and (5) vibratory deicing. The related cockpit concept reduces pilot workload for critical mission segments as much as 178% visual and 25% manual.
Fokkinga, Wietske A; Kreulen, Cees M; Vallittu, Pekka K; Creugers, Nico H J
2004-01-01
This study sought to aggregate literature data on in vitro failure loads and failure modes of prefabricated fiber-reinforced composite (FRC) post systems and to compare them to those of prefabricated metal, custom-cast, and ceramic post systems. The literature was searched using MEDLINE from 1984 to 2003 for dental articles in English. Keywords used were (post or core or buildup or dowel) and (teeth or tooth). Additional inclusion/exclusion steps were conducted, each step by two independent readers: (1) Abstracts describing post-and-core techniques to reconstruct endodontically treated teeth and their mechanical and physical characteristics were included (descriptive studies or reviews were excluded); (2) articles that included FRC post systems were selected; (3) in vitro studies, single-rooted human teeth, prefabricated FRC posts, and composite as the core material were the selection criteria; and (4) failure loads and modes were extracted from the selected papers, and failure modes were dichotomized (distinction was made between "favorable failures," defined as reparable failures, and "unfavorable failures,"defined as irreparable [root] fractures). The literature search revealed 1,984 abstracts. Included were 244, 42, and 12 articles in the first, second, and third selection steps, respectively. Custom-cast post systems showed higher failure loads than prefabricated FRC post systems, whereas ceramic showed lower failure loads. Significantly more favorable failures occurred with prefabricated FRC post systems than with prefabricated and custom-cast metal post systems. The variable "post system" had a significant effect on mean failure loads. FRC post systems more frequently showed favorable failure modes than did metal post systems.
Human versus automation in responding to failures: an expected-value analysis
NASA Technical Reports Server (NTRS)
Sheridan, T. B.; Parasuraman, R.
2000-01-01
A simple analytical criterion is provided for deciding whether a human or automation is best for a failure detection task. The method is based on expected-value decision theory in much the same way as is signal detection. It requires specification of the probabilities of misses (false negatives) and false alarms (false positives) for both human and automation being considered, as well as factors independent of the choice--namely, costs and benefits of incorrect and correct decisions as well as the prior probability of failure. The method can also serve as a basis for comparing different modes of automation. Some limiting cases of application are discussed, as are some decision criteria other than expected value. Actual or potential applications include the design and evaluation of any system in which either humans or automation are being considered.
Interfacing LabVIEW With Instrumentation for Electronic Failure Analysis and Beyond
NASA Technical Reports Server (NTRS)
Buchanan, Randy K.; Bryan, Coleman; Ludwig, Larry
1996-01-01
The Laboratory Virtual Instrumentation Engineering Workstation (LabVIEW) software is designed such that equipment and processes related to control systems can be operationally lined and controlled by the use of a computer. Various processes within the failure analysis laboratories of NASA's Kennedy Space Center (KSC) demonstrate the need for modernization and, in some cases, automation, using LabVIEW. An examination of procedures and practices with the Failure Analaysis Laboratory resulted in the conclusion that some device was necessary to elevate the potential users of LabVIEW to an operational level in minimum time. This paper outlines the process involved in creating a tutorial application to enable personnel to apply LabVIEW to their specific projects. Suggestions for furthering the extent to which LabVIEW is used are provided in the areas of data acquisition and process control.
Supplementary value of functional imaging in forensic medicine.
Mirzaei, Siroos; Sonneck-Koenne, Charlotte; Bruecke, Thomas; Aryana, Kamran; Knoll, Peter; Zakavi, Rasoul
2012-01-01
The aim of this study is to evaluate the role of functional imaging for forensic purposes. We reviewed a few outpatient cases that were sent to our department for examination after traumatic events and one case with neuropsychic disturbances. Functional imaging showed signs of traumatic lesions in the skeletal system, of brain metabolism and of renal failure. Functional disturbances following traumatic events are in some cases more important than morphological abnormalities. Targeted scintigraphic examinations could be applied for visualisation of traumatic lesions or evaluation of functional disturbances caused by traumatic events. These examinations can be used as evidence in the courtroom.
Anabolic steroid-induced cardiomyopathy underlying acute liver failure in a young bodybuilder.
Bispo, Miguel; Valente, Ana; Maldonado, Rosário; Palma, Rui; Glória, Helena; Nóbrega, João; Alexandrino, Paula
2009-06-21
Heart failure may lead to subclinical circulatory disturbances and remain an unrecognized cause of ischemic liver injury. We present the case of a previously healthy 40-year-old bodybuilder, referred to our Intensive-Care Unit of Hepatology for treatment of severe acute liver failure, with the suspicion of toxic hepatitis associated with anabolic steroid abuse. Despite the absence of symptoms and signs of congestive heart failure at admission, an anabolic steroid-induced dilated cardiomyopathy with a large thrombus in both ventricles was found to be the underlying cause of the liver injury. Treatment for the initially unrecognized heart failure rapidly restored liver function to normal. To our knowledge, this is the first reported case of severe acute liver failure due to an unrecognized anabolic steroid-induced cardiomyopathy. Awareness of this unique presentation will allow for prompt treatment of this potentially fatal cause of liver failure.
Probabilistic assessment of dynamic system performance. Part 3
DOE Office of Scientific and Technical Information (OSTI.GOV)
Belhadj, Mohamed
1993-01-01
Accurate prediction of dynamic system failure behavior can be important for the reliability and risk analyses of nuclear power plants, as well as for their backfitting to satisfy given constraints on overall system reliability, or optimization of system performance. Global analysis of dynamic systems through investigating the variations in the structure of the attractors of the system and the domains of attraction of these attractors as a function of the system parameters is also important for nuclear technology in order to understand the fault-tolerance as well as the safety margins of the system under consideration and to insure a safemore » operation of nuclear reactors. Such a global analysis would be particularly relevant to future reactors with inherent or passive safety features that are expected to rely on natural phenomena rather than active components to achieve and maintain safe shutdown. Conventionally, failure and global analysis of dynamic systems necessitate the utilization of different methodologies which have computational limitations on the system size that can be handled. Using a Chapman-Kolmogorov interpretation of system dynamics, a theoretical basis is developed that unifies these methodologies as special cases and which can be used for a comprehensive safety and reliability analysis of dynamic systems.« less
Energy drink-induced acute kidney injury.
Greene, Elisa; Oman, Kristy; Lefler, Mary
2014-10-01
To report a case of acute renal failure possibly induced by Red Bull. A 40-year-old man presented with various complaints, including a recent hypoglycemic episode. Assessment revealed that serum creatinine was elevated at 5.5 mg/dL, from a baseline of 0.9 mg/dL. An interview revealed a 2- to 3-week history of daily ingestion of 100 to 120 oz of Red Bull energy drink. Resolution of renal dysfunction occurred within 2 days of discontinuation of Red Bull and persisted through 10 months of follow-up. Rechallenge was not attempted. Energy-drink-induced renal failure has been reported infrequently. We identified 2 case reports via a search of MEDLINE, one of which occurred in combination with alcohol and the other of which was not available in English. According to the Food and Drug Administration's (FDA's) Center for Food Safety and Applied Nutrition Adverse Event Reporting System, between 2004 and 2012, the FDA has received 166 reports of adverse events associated with energy drink consumption. Only 3 of the 166 (0.18%) described renal failure, and none were reported with Red Bull specifically. A defined mechanism for injury is unknown. Assessment of the Naranjo adverse drug reaction probability scale indicates a probable relationship between the development of acute renal failure and Red Bull ingestion in our patient. Acute kidney injury has rarely been reported with energy drink consumption. Our report describes the first English language report of acute renal failure occurring in the context of ingestion of large quantities of energy drink without concomitant alcohol. © The Author(s) 2014.
Pomajzl, Ryan Joseph; Baker, Erin Ann; Baker, Kevin Charles; Fleischer, Mackenzie Marie; Salisbury, Meagan R; Phillips, Dylan M; Fortin, Paul Thomas
2016-09-01
Fresh osteochondral allografting of the talus is one treatment option for large chondral defects. Following positive early term results, failure rates of up to 35% have been reported. A retrieval study was performed to characterize failed talar allografts. Failed fresh osteochondral allografts of the talus were retrieved on revision. Cases of deep infection were excluded. After tissue fixation, samples were decalcified, embedded, and stained with Safranin-O/Fast Green, osteocalcin, tumor necrosis factor alpha (TNF-α), CD4, CD8, and CD68. Slides were graded according to the modified Mankin scoring system or severity scale. Medical record review was performed. Eight allografts (7 patients) were retrieved from patients, following an average term of implantation of 31 months (range, 12-58). There were 3 types of allografts in this series (hemidome, n=5; segmental, n=2; bipolar, n=1). Reasons for transplantation were post-traumatic arthritis or osteonecrosis; reasons for revision were graft failure/collapse, nonunion, progressive arthritis, and/or pain. Prior to revision, all grafts exhibited collapse and subchondral lucencies. At the graft host interface, Safranin-O staining demonstrated substantial loss of sulfated glycosaminoglycans, Osteocalcin immunostaning was nearly absent, CD68 (indicating osteoclast activity) was predominantly exhibited, and CD4+ helper T cells as well as CD8+ cytotoxic T cells and NK cells-cell types commonly implicated in allogeneic organ transplant rejection-were found in high concentrations. TNF-α was present throughout the graft. A histopathologic analysis of 8 retrieved, failed talar allografts was performed. Graft failure appeared to be primarily biologic, with an extensive loss of viable cartilaginous and osseous tissue at the graft-host interface. This study provides the first evidence of a potential CD4+ and CD8+ lymphocyte-mediated failure mechanism in fresh osteochondral allografts that were revised following collapse. Level IV, case series. © The Author(s) 2016.
On the occurrence of rainstorm damage based on home insurance and weather data
NASA Astrophysics Data System (ADS)
Spekkers, M. H.; Clemens, F. H. L. R.; ten Veldhuis, J. A. E.
2014-08-01
Rainstorm damage caused by malfunctioning of urban drainage systems and water intrusion due to defects in the building envelope can be considerable. Little research on this topic focused on the collection of damage data, the understanding of damage mechanisms and the deepening of data analysis methods. In this paper, the relative contribution of different failure mechanisms to the occurrence of rainstorm damage are investigated, as well as the extent to which these mechanisms relate to weather variables. For a case study in Rotterdam, the Netherlands, a property level home insurance database of around 3100 water-related damage claims was analysed. Records include comprehensive transcripts of communication between insurer, insured and damage assessment experts, which allowed claims to be classified according to their actual damage cause. Results show that roof and wall leakage is the most frequent failure mechanism causing precipitation-related claims, followed by blocked roof gutters, melting snow and sewer flooding. Claims related to sewer flooding were less present in the data, but are associated with significantly larger claim sizes than claims in the majority class, i.e. roof and wall leakages. Rare events logistic regression analysis revealed that maximum rainfall intensity and rainfall volume are significant predictors for the occurrence probability of precipitation-related claims. Moreover, it was found that claims associated with rainfall intensities smaller than 7-8 mm in a 60 min window are mainly related to failures processes in the private domain, such as roof and wall leakages. For rainfall events that exceed the 7-8 mm h-1 threshold, failure of systems in the public domain, such as sewer systems, start to contribute considerably to the overall occurrence probability of claims. The communication transcripts, however, lacked information to be conclusive about to extent to which sewer-related claims were caused by overloading of sewer systems or failure of system components.
On the occurrence of rainstorm damage based on home insurance and weather data
NASA Astrophysics Data System (ADS)
Spekkers, M. H.; Clemens, F. H. L. R.; ten Veldhuis, J. A. E.
2015-02-01
Rainstorm damage caused by the malfunction of urban drainage systems and water intrusion due to defects in the building envelope can be considerable. Little research on this topic focused on the collection of damage data, the understanding of damage mechanisms and the deepening of data analysis methods. In this paper, the relative contribution of different failure mechanisms to the occurrence of rainstorm damage is investigated, as well as the extent to which these mechanisms relate to weather variables. For a case study in Rotterdam, the Netherlands, a property level home insurance database of around 3100 water-related damage claims was analysed. The records include comprehensive transcripts of communication between insurer, insured and damage assessment experts, which allowed claims to be classified according to their actual damage cause. The results show that roof and wall leakage is the most frequent failure mechanism causing precipitation-related claims, followed by blocked roof gutters, melting snow and sewer flooding. Claims related to sewer flooding were less present in the data, but are associated with significantly larger claim sizes than claims in the majority class, i.e. roof and wall leakages. Rare events logistic regression analysis revealed that maximum rainfall intensity and rainfall volume are significant predictors for the occurrence probability of precipitation-related claims. Moreover, it was found that claims associated with rainfall intensities smaller than 7-8 mm in a 60-min window are mainly related to failure processes in the private domain, such as roof and wall leakages. For rainfall events that exceed the 7-8 mm h-1 threshold, the failure of systems in the public domain, such as sewer systems, start to contribute considerably to the overall occurrence probability of claims. The communication transcripts, however, lacked information to be conclusive about to which extent sewer-related claims were caused by overloading of sewer systems or failure of system components.
Effect of Preconditioning and Soldering on Failures of Chip Tantalum Capacitors
NASA Technical Reports Server (NTRS)
Teverovsky, Alexander A.
2014-01-01
Soldering of molded case tantalum capacitors can result in damage to Ta205 dielectric and first turn-on failures due to thermo-mechanical stresses caused by CTE mismatch between materials used in the capacitors. It is also known that presence of moisture might cause damage to plastic cases due to the pop-corning effect. However, there are only scarce literature data on the effect of moisture content on the probability of post-soldering electrical failures. In this work, that is based on a case history, different groups of similar types of CWR tantalum capacitors from two lots were prepared for soldering by bake, moisture saturation, and longterm storage at room conditions. Results of the testing showed that both factors: initial quality of the lot, and preconditioning affect the probability of failures. Baking before soldering was shown to be effective to prevent failures even in lots susceptible to pop-corning damage. Mechanism of failures is discussed and recommendations for pre-soldering bake are suggested based on analysis of moisture characteristics of materials used in the capacitors' design.
A Note About HARP's State Trimming Method
NASA Technical Reports Server (NTRS)
Butler, Ricky W.; Hayhurst, Kelly J.; Johnson, Sally C.
1998-01-01
This short note provides some additional insight into how the HARP program works. In some cases, it is possible for HARP to tdm away too many states and obtain an optimistic result. The HARP Version 7.0 manual warns the user that 'Unlike the ALL model, the SAME model can automatically drop failure modes for certain system models. The user is cautioned to insure that no important failure modes are dropped; otherwise, a non-conservative result can be given.' This note provides an example of where this occurs and a pointer to further documentation that gives a means of bounding the error associated with trimming these states.
Augmented halal food traceability system: analysis and design using UML
NASA Astrophysics Data System (ADS)
Usman, Y. V.; Fauzi, A. M.; Irawadi, T. T.; Djatna, T.
2018-04-01
Augmented halal food traceability is expanding the range of halal traceability in food supply chain where currently only available for tracing from the source of raw material to the industrial warehouse or inbound logistic. The halal traceability system must be developed in the integrated form that includes inbound and outbound logistics. The objective of this study was to develop a reliable initial model of integrated traceability system of halal food supply chain. The method was based on unified modeling language (UML) such as use case, sequence, and business process diagram. A goal programming model was formulated considering two objective functions which include (1) minimization of risk of halal traceability failures happened potentially during outbound logistics activities and (2) maximization of quality of halal product information. The result indicates the supply of material is the most important point to be considered in minimizing the risk of failure of halal food traceability system whereas no risk observed in manufacturing and distribution.
Guaranteeing safety in spatially situated agents
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kohout, R.C.; Hendler, J.A.; Musliner, D.J.
1996-12-31
{open_quote}Mission-critical{close_quotes} systems, which include such diverse applications as nuclear power plant controllers, {open_quotes}fly-by-wire{close_quotes} airplanes, medical care and monitoring systems, and autonomous mobile vehicles, are characterized by the fact that system failure is potentially catastrophic. The high cost of failure justifies the expenditure of considerable effort at design-time in order to guarantee the correctness of system behavior. This paper examines the problem of guaranteeing safety in a well studied class of robot motion problems known as the {open_quotes}asteroid avoidance problem.{close_quotes} We establish necessary and sufficient conditions for ensuring safety in the simple version of this problem which occurs most frequently inmore » the literature, as well as sufficient conditions for a more general and realistic case. In doing so, we establish functional relationships between the number, size and speed of obstacles, the robot`s maximum speed and the conditions which must be maintained in order to ensure safety.« less
Investigating an API for resilient exascale computing.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stearley, Jon R.; Tomkins, James; VanDyke, John P.
2013-05-01
Increased HPC capability comes with increased complexity, part counts, and fault occurrences. In- creasing the resilience of systems and applications to faults is a critical requirement facing the viability of exascale systems, as the overhead of traditional checkpoint/restart is projected to outweigh its bene ts due to fault rates outpacing I/O bandwidths. As faults occur and propagate throughout hardware and software layers, pervasive noti cation and handling mechanisms are necessary. This report describes an initial investigation of fault types and programming interfaces to mitigate them. Proof-of-concept APIs are presented for the frequent and important cases of memory errors and nodemore » failures, and a strategy proposed for lesystem failures. These involve changes to the operating system, runtime, I/O library, and application layers. While a single API for fault handling among hardware and OS and application system-wide remains elusive, the e ort increased our understanding of both the mountainous challenges and the promising trailheads. 3« less
Teshome, Wondu; Asefa, Anteneh; Assefa, Anteneh
2014-01-01
In resource constrained settings, immunological assessment through CD4 count is used to assess response to first line Highly Active Antiretroviral Therapy (HAART). In this study, we aim to investigate factors associated with immunological treatment failure. A matched case-control study design was used. Cases were subjects who already experienced immunological treatment failure and controls were those without immunological failure after an exactly or approximately equivalent duration of first line treatment with cases. Data were analyzed using SPSS v16.0. Conditional logistic regression was carried out. A total of 134 cases and 134 controls were included in the study. At baseline, the mean age ± 1 SD of cases was 37.5 ± 9.7 years whereas it was 36.9 ± 9.2 years among controls. The median baseline CD4 counts of cases and controls were 121.0 cells/µl (IQR: 47-183 cells/µl) and 122.0 cells/µl (IQR: 80.0-189.8 cells/µl), respectively. The median rate of CD4 cells increase was comparable for the two groups in the first six months of commencing HAART (P = 0.442). However, the median rate of CD4 increase was significantly different for the two groups in the next 6 months period (M6 to M12). The rate of increment was 8.8 (IQR: 0.5, 14.6) and 1.8 (IQR: 8.8, 11.3) cells/µl/month for controls and cases, respectively (Mann-Whitney U test, P = 0.003). In conditional logistic regressions grouped baseline CD4 count (P = 0.028), old age group and higher educational status (P<0.001) were significant predictors of immunological treatment failure. Subjects with immunological treatment failure have an optimal rate of immunological recovery in the first 6 months of treatment with first line HAART, but relative to the non-failing group the rate declines at a later period, notably between 6 and 12 months. Low baseline CD4 count, old age and higher educational status were associated with immunological treatment failure.
López-Suárez, Carlos; Gonzalo, Esther; Peláez, Jesús; Rodríguez, Verónica
2015-01-01
Background In recent years there has been an improvement of zirconia ceramic materials to replace posterior missing teeth. To date little in vitro studies has been carried out on the fracture resistance of zirconia veneered posterior fixed dental prostheses. This study investigated the fracture resistance and the failure mode of 3-unit zirconia-based posterior fixed dental prostheses fabricated with two CAD/CAM systems. Material and Methods Twenty posterior fixed dental prostheses were studied. Samples were randomly divided into two groups (n=10 each) according to the zirconia ceramic analyzed: Lava and Procera. Specimens were loaded until fracture under static load. Data were analyzed using Wilcoxon´s rank sum test and Wilcoxon´s signed-rank test (P<0.05). Results Partial fracture of the veneering porcelain occurred in 100% of the samples. Within each group, significant differences were shown between the veneering and the framework fracture resistance (P=0.002). The failure occurred in the connector cervical area in 80% of the cases. Conclusions All fracture load values of the zirconia frameworks could be considered clinically acceptable. The connector area is the weak point of the restorations. Key words:Fixed dental prostheses, zirconium-dioxide, zirconia, fracture resistance, failure mode. PMID:26155341
[Impact of end-stage renal disease and kidney transplantation on the reproductive system].
Delesalle, A-S; Robin, G; Provôt, F; Dewailly, D; Leroy-Billiard, M; Peigné, M
2015-01-01
Chronic renal failure leads to many metabolic disorders affecting reproductive function. For men, hypergonadotropic hypogonadism, hyperprolactinemia, spermatic alterations, decreased libido and erectile dysfunction are described. Kidney transplantation improves sperm parameters and hormonal function within 2 years. But sperm alterations may persist with the use of immunosuppressive drugs. In women, hypothalamic-pituitary-ovarian axis dysfunction due to chronic renal failure results in menstrual irregularities, anovulation and infertility. After kidney transplantation, regular menstruations usually start 1 to 12 months after transplantation. Fertility can be restored but luteal insufficiency can persist. Moreover, 4 to 20% of women with renal transplantation suffer from premature ovarian failure syndrome. In some cases, assisted reproductive technologies can be required and imply risks of ovarian hyperstimulation syndrome and must be performed with caution. Pregnancy risks for mother, fetus and transplant are added to assisted reproductive technologies ones. Only 7 authors have described assisted reproductive technologies for patients with kidney transplantation. No cases of haemodialysis patients have been described yet. So, assisted reproductive technologies management requires a multidisciplinary approach with obstetrics, nephrology and reproductive medicine teams' agreement. Copyright © 2014 Elsevier Masson SAS. All rights reserved.
Cardiac Arrest Secondary to Lightning Strike: Case Report and Review of the Literature.
Rotariu, Elena L; Manole, Mioara D
2017-08-01
Lightning strike injuries, although less common than electrical injuries, have a higher morbidity rate because of critical alterations of the circulatory system, respiratory system, and central nervous system. Most lightning-related deaths occur immediately after injury because of arrhythmia or respiratory failure. We describe the case of a pediatric patient who experienced cardiorespiratory arrest secondary to a lightning strike, where the Advanced Cardiac Life Support and Basic Life Support chain of survival was well executed, leading to return of spontaneous circulation and intact neurological survival. We review the pathophysiology of lightning injuries, prognostic factors of favorable outcome after cardiac arrest, including bystander cardiopulmonary resuscitation, shockable rhythm, and automatic external defibrillator use, and the importance of temperature management after cardiac arrest.
Chun, Young Soo; Juh, Hyung Suk; Cho, Yoon Je; Rhyu, Kee Hyung
2015-09-01
Femoral stem fracture is an uncommon reason for the failure of total hip arthroplasty, with only 16 cases of fully coated stem fractures reported to date. Here we report a case in which a fully coated primary femoral stem fracture occurred after conversion to total hip arthroplasty for the non-union of an intertrochanteric fracture of the femur. Metallurgic evaluation of the etiology and mechanism revealed that the fracture was initiated by fatigue-related failure and completed by ductile failure on the posterior side of the fracture. Considering the recent trend of treating an intertrochanteric fracture with hip arthroplasty, possible stem failure should be considered, since most patients will have at least one of the known risk factors for stem fracture.
Chun, Young Soo; Juh, Hyung Suk; Cho, Yoon Je
2015-01-01
Femoral stem fracture is an uncommon reason for the failure of total hip arthroplasty, with only 16 cases of fully coated stem fractures reported to date. Here we report a case in which a fully coated primary femoral stem fracture occurred after conversion to total hip arthroplasty for the non-union of an intertrochanteric fracture of the femur. Metallurgic evaluation of the etiology and mechanism revealed that the fracture was initiated by fatigue-related failure and completed by ductile failure on the posterior side of the fracture. Considering the recent trend of treating an intertrochanteric fracture with hip arthroplasty, possible stem failure should be considered, since most patients will have at least one of the known risk factors for stem fracture. PMID:27536622
Tso, Geoffrey; Kaldas, Kirsten; Springer, Joseph; Barot, Nikhil; Kamangar, Nader
2016-05-01
Since the outbreak of West Nile virus (WNV) in the United States in 1999, the WNV neuroinvasive disease has been increasingly reported with a wide spectrum of neuromuscular manifestations. We submit a case of a 46-year-old male with a history of alcohol abuse, diabetes, hypertension, and hepatitis C who presented with fever, nausea, shortness of breath, and dysphagia. The patient rapidly developed hypercapnic respiratory failure and was found to have WNV meningoencephalitis without obvious neuromuscular weakness. His hospital course was significant for repeated failures of extubation secondary to persistent bulbar weakness eventually requiring tracheotomy. This is a unique case of WNV meningoencephalitis with bulbar palsy without other neuromuscular manifestations resulting in recurrent hypercapnic respiratory failure. © The Author(s) 2015.
Vibration detection of component health and operability
NASA Technical Reports Server (NTRS)
Baird, B. C.
1975-01-01
In order to prevent catastrophic failure and eliminate unnecessary periodic maintenance in the shuttle orbiter program environmental control system components, some means of detecting incipient failure in these components is required. The utilization was investigated of vibrational/acoustic phenomena as one of the principal physical parameters on which to base the design of this instrumentation. Baseline vibration/acoustic data was collected from three aircraft type fans and two aircraft type pumps over a frequency range from a few hertz to greater than 3000 kHz. The baseline data included spectrum analysis of the baseband vibration signal, spectrum analysis of the detected high frequency bandpass acoustic signal, and amplitude distribution of the high frequency bandpass acoustic signal. A total of eight bearing defects and two unbalancings was introduced into the five test items. All defects were detected by at least one of a set of vibration/acoustic parameters with a margin of at least 2:1 over the worst case baseline. The design of a portable instrument using this set of vibration/acoustic parameters for detecting incipient failures in environmental control system components is described.
Comparison of two different modes of molecular adsorbent recycling systems for liver dialysis.
Soo, Euan; Sanders, Anja; Heckert, Karlheinz; Vinke, Tobias; Schaefer, Franz; Schmitt, Claus Peter
2016-11-01
In children acute liver failure is a rare but life-threatening condition from which two-thirds do not recover with supportive therapy. Treatment is limited by the availability of liver transplants. Molecular adsorbent recirculating system (MARS) dialysis is a bridge to transplantation that enhances the chances of survival during the waiting period for a transplant, although it cannot improve survival. Open albumin dialysis (OPAL) is a new mode of albumin dialysis developed to further improve dialysis efficiency. We report a paediatric case of acute-on-chronic liver failure and compare the two modes of albumin dialysis, namely, the MARS and OPAL, used to treat this patient's cholestatic pruritus. Removal of total and direct bilirubin, ammonia and bile acids were measured by serial blood tests. There was an increased removal of bile acids with the OPAL mode, whereas the removal of total and direct bilirubin and ammonia was similar in both modes. The patient reported better improvement in pruritus following OPAL compared to dialysis with the MARS. OPAL may offer a better solution than the MARS in the treatment of refractory pruritus in liver failure.
NASA Technical Reports Server (NTRS)
Bazley, Jesse A.
2011-01-01
This presentation will discuss the International Space Station s (ISS) Regenerative Environmental Control and Life Support System (ECLSS) operations with discussion of the on-orbit lessons learned, specifically regarding the challenges that have been faced as the system has expanded with a growing ISS crew. Over the 10 year history of the ISS, there have been numerous challenges, failures, and triumphs in the quest to keep the crew alive and comfortable. Successful operation of the ECLSS not only requires maintenance of the hardware, but also management of the station resources in case of hardware failure or missed re-supply. This involves effective communication between the primary International Partners (NASA and Roskosmos) and the secondary partners (JAXA and ESA) in order to keep a reserve of the contingency consumables and allow for re-supply of failed hardware. The ISS ECLSS utilizes consumables storage for contingency usage as well as longer-term regenerative systems, which allow for conservation of the expensive resources brought up by re-supply vehicles. This long-term hardware, and the interactions with software, was a challenge for Systems Engineers when they were designed and require multiple operational workarounds in order to function continuously. On a day-to-day basis, the ECLSS provides big challenges to the on console controllers. Main challenges involve the utilization of the resources that have been brought up by the visiting vehicles prior to undocking, balance of contributions between the International Partners for both systems and resources, and maintaining balance between the many interdependent systems, which includes providing the resources they need when they need it. The current biggest challenge for ECLSS is the Regenerative ECLSS system, which continuously recycles urine and condensate water into drinking water and oxygen. These systems were brought to full functionality on STS-126 (ULF-2) mission. Through system failures and recovery, the ECLSS console has learned how to balance the water within the systems, store and use water for contingencies, and continue to work with the International Partners for short-term failures. Through these challenges and the system failures, the most important lesson learned has been the importance of redundancy and operational workarounds. It is only because of the flexibility of the hardware and the software that flight controllers have the opportunity to continue operating the system as a whole for mission success.
Teaching an Old Dog New Tricks: Disaster Recovery in a Small Business Context
ERIC Educational Resources Information Center
Rossmiller, Zach; Lawrence, Cameron; Clouse, Shawn; Looney, Clayton
2017-01-01
Many entrepreneurs and small business owners lack disaster recovery plans, which minimize business disruptions caused by failures of critical technical systems. Typically, technology is not the main focus for a small business owner, as most of their time is spent focused on business operations. This case study demonstrates that when a business…
Mechanophores for Self-Healing Applications
2013-09-09
macroscopic failure. One of the first discovered mechanochemical reactions was the self - healing of vulcanized rubber . Damaging mechanical force...therefore have potential self - healing features. Using the serendipitous case of rubber as a model, mechanophores that produce reactive species under...Mechanophores for Self - Healing Applications Supramolecular polymers held together by hydrogen bonds make efficient self - healing systems. A rubber -like polymer
Overseas Trained Teachers in England: A Policy Framework for Social and Professional Integration
ERIC Educational Resources Information Center
Miller, Paul Washington
2008-01-01
Overseas trained teachers (OTTs) have become an important part of the make-up of England's primary and secondary education system. Through inadequate, and in some cases a lack of, initial induction and support for professional development, many are at risk of performing sub-optimally and some have become an endangered species. Failure to integrate…
ERIC Educational Resources Information Center
Schwedler, Jennifer Green
2017-01-01
Enterprise software implementations are subject to high failure rates. Organizations of higher education can be particularly resistant to technology implementations as they can be perceived as eroding the traditions of the institution. The California State University (CSU) system is moving into a new phase of data-driven accountability for…
Factors Affecting University Instructors' Adoption of Web-Based Learning Systems: Case Study of Iran
ERIC Educational Resources Information Center
Motaghian, Hediyeh; Hassanzadeh, Alireza; Moghadam, Davood Karimzadgan
2013-01-01
In many societies e-learning has become the main mechanism supporting distance education. Although e-learning efforts are considered to be a significant corporate investment, many surveys indicate high drop-out rates or failures. This research uses an integrated model in order to assessing the influence of IS-oriented, psychological and behavioral…
The Best Kept Secret...Self-Initiated Change: Veteran Teachers' Catalyst for Renewal.
ERIC Educational Resources Information Center
Collinson, Vivienne; And Others
This paper reviews literature on teaching, learning, and change, focusing on change as a system for self-renewal and examining change in terms of long-term purposes, the risk of failure, self understanding, productive relationships, habits of thinking, and curiosity. The paper presents results from a synthesis of two qualitative case studies of…
ERIC Educational Resources Information Center
Milner, H. Richard, IV; Delale-O'Connor, Lori A.; Murray, Ira E.; Farinde, Abiola A.
2016-01-01
Background/Context: Prior research on "Milliken v. Bradley" focuses on the failure of this case to implement interdistrict busing in the highly segregated Detroit schools. Much of this work focuses explicitly on desegregation, rather than on equity and addressing individual, systemic, institutional, and organizational challenges that may…
Bourquin, Vincent; Ponte, Belén; Hirschel, Bernard; Pugin, Jérôme; Martin, Pierre-Yves; Saudan, Patrick
2011-01-01
Background. Leptospirosis is a spirochetal zoonosis with complex clinical features including renal and liver failure. Case report. We report the case of a Swiss fisherman presenting with leptospirosis. After initial improvement, refractory septic shock and severe liver and kidney failure developed. The expected mortality was estimated at 90% with clinical scores. The patient underwent plasma exchanges and high-volume hemofiltration (HVHF) with complete recovery of hepatic and kidney functions. Discussion. Plasma exchanges and HVHF may confer survival benefit on patients with severe leptospirosis, refractory septic shock, and multiple-organ failure.
First experience with clinical use of an original hemoperfusion system.
Horký, J; Horák, J; Tlustáková, M; Kálal, J
1981-01-01
1. The authors present their experience with the use of an original charcoal hemoperfusion system Hemosorb in clinical application, in 9 patients with a heavy metabolic disturbance (failure of the liver and kidney) and after an intoxication with drugs. 2. In two patients the consciousness was remarkably recovered and in one patient it was improved already in the course of the hemoperfusion process, in further two cases the consciousness was recovered in short time after the Hemosorb was used, 7 were completely healed. 3. During the hemoperfusion with Hemosorb there were no symptoms of bad tolerance and no complications except for temporary pyretic reaction in one case. In unique cases manifestations of an enhanced bleeding occurred at the end of the long-term process, which were, however, rather easily corrected. The drop of thrombocytes was essentially reasonable and their restriction after the hemoperfusion was good. 4. Out of metabolic parameters of interest, in the patients with the heavy metabolic failure the drop of total phenol substances, uric acid and creatinine in the blood serum were observed at first stages of the hemoperfusion. The clearance of the total phenol substances and creatinine in the hemoperfusion system was ever rather high. 5. In a patient intoxicated with drugs, there was a remarkable drop of the metaqualone in the blood serum in the course of the hemoperfusion with Hemosorb; the clearance of this compound in the hemoperfusion system was still high after 4 hrs. 6. The first experiences with the clinical application of a new, original hemoperfusion system demonstrated its non-harmful character and biocompatibility as well as clinical, metabolic and toxicologic efficiency.
Kim, Youngjun; Gobbel, Glenn Temple; Matheny, Michael E; Redd, Andrew; Bray, Bruce E; Heidenreich, Paul; Bolton, Dan; Heavirland, Julia; Kelly, Natalie; Reeves, Ruth; Kalsy, Megha; Goldstein, Mary Kane; Meystre, Stephane M
2018-01-01
Background We developed an accurate, stakeholder-informed, automated, natural language processing (NLP) system to measure the quality of heart failure (HF) inpatient care, and explored the potential for adoption of this system within an integrated health care system. Objective To accurately automate a United States Department of Veterans Affairs (VA) quality measure for inpatients with HF. Methods We automated the HF quality measure Congestive Heart Failure Inpatient Measure 19 (CHI19) that identifies whether a given patient has left ventricular ejection fraction (LVEF) <40%, and if so, whether an angiotensin-converting enzyme inhibitor or angiotensin-receptor blocker was prescribed at discharge if there were no contraindications. We used documents from 1083 unique inpatients from eight VA medical centers to develop a reference standard (RS) to train (n=314) and test (n=769) the Congestive Heart Failure Information Extraction Framework (CHIEF). We also conducted semi-structured interviews (n=15) for stakeholder feedback on implementation of the CHIEF. Results The CHIEF classified each hospitalization in the test set with a sensitivity (SN) of 98.9% and positive predictive value of 98.7%, compared with an RS and SN of 98.5% for available External Peer Review Program assessments. Of the 1083 patients available for the NLP system, the CHIEF evaluated and classified 100% of cases. Stakeholders identified potential implementation facilitators and clinical uses of the CHIEF. Conclusions The CHIEF provided complete data for all patients in the cohort and could potentially improve the efficiency, timeliness, and utility of HF quality measurements. PMID:29335238
Spacecraft Parachute Recovery System Testing from a Failure Rate Perspective
NASA Technical Reports Server (NTRS)
Stewart, Christine E.
2013-01-01
Spacecraft parachute recovery systems, especially those with a parachute cluster, require testing to identify and reduce failures. This is especially important when the spacecraft in question is human-rated. Due to the recent effort to make spaceflight affordable, the importance of determining a minimum requirement for testing has increased. The number of tests required to achieve a mature design, with a relatively constant failure rate, can be estimated from a review of previous complex spacecraft recovery systems. Examination of the Apollo parachute testing and the Shuttle Solid Rocket Booster recovery chute system operation will clarify at which point in those programs the system reached maturity. This examination will also clarify the risks inherent in not performing a sufficient number of tests prior to operation with humans on-board. When looking at complex parachute systems used in spaceflight landing systems, a pattern begins to emerge regarding the need for a minimum amount of testing required to wring out the failure modes and reduce the failure rate of the parachute system to an acceptable level for human spaceflight. Not only a sufficient number of system level testing, but also the ability to update the design as failure modes are found is required to drive the failure rate of the system down to an acceptable level. In addition, sufficient data and images are necessary to identify incipient failure modes or to identify failure causes when a system failure occurs. In order to demonstrate the need for sufficient system level testing prior to an acceptable failure rate, the Apollo Earth Landing System (ELS) test program and the Shuttle Solid Rocket Booster Recovery System failure history will be examined, as well as some experiences in the Orion Capsule Parachute Assembly System will be noted.
Bahramali, Ehsan; Rajabi, Mona; Jamshidi, Javad; Mousavi, Seyyed Mohammad; Zarghami, Mehrdad; Manafi, Alireza; Firouzabadi, Negar
2016-02-09
To explore the association between ACE gene insertion/deletion (I/D) polymorphism with left ventricular hypertrophy (LVH) in patients with hypertension who have developed heart failure with preserved ejection fraction (HFpEF). Being a major contributor to the development of diastolic heart dysfunction, the renin angiotensin aldosterone system and its genetic variations are thought to induce LVH in hypertensive hearts apart from haemodynamic factors. Case control study. An Iranian referral university hospital. 176 patients with hypertension and a diagnosis of HFpEF on presence of symptoms of heart failure plus Doppler echocardiographic documentation of left ventricular (LV) diastolic dysfunction and/or elevated NT-proBNP levels. Those with significant coronary, valvular, pericardial and structural heart diseases were excluded as well as patients with atrial fibrillation, renal failure and pulmonary causes of dyspnoea. They were divided into two cohorts of 88 cases with and 88 controls without LVH, after determination of LV mass index, using two-dimensional and M-mode echocardiography. The I/D polymorphism of the ACE gene was determined using the PCR method. The D allele was significantly more prevalent among cases with compared with controls without LVH (p=0.0007). Genotype distributions also differed significantly under additive (p=0.005, OR=0.53, 95% CI 0.34 to 0.84) and recessive (p=0.001, OR=0.29, 95% CI 0.13 to 0.66) models. In patients with hypertension who develop HFpEF, the D allele of the ACE gene is probably associated with the development of LVH. With the detrimental effects of LVH on the heart's diastolic properties, this can signify the role of genetic contributors to the development of HFpEF in patients with hypertension and may serve as a future risk predictor for the disease. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
[CHRONIC RENAL FAILURE AND PREGNANCY--A CASE REPORT].
Amaliev, G M; Uchikova, E; Malinova, M
2015-01-01
Pregnancy in women with chronic renal failure is a complex therapeutic problem requiring a multidisciplinary approach. It is associated with a higher risk of many perinatal complications. The most common abnormalities are related to: progression of renal failure, development of preeclampsia development of nephrotic syndrome, anemic syndrome, IUGR and fetal death. The prognosis depends on the values of serum creatinine prior to pregnancy, the degree of deterioration of renal function, development of additional obstetric complications and the specific etiological reasons that have led to the occurrence of renal failure. Determining the optimum time for authorization birth depends on the condition of the mother, the condition of the fetus and the rate of progression of renal failure, and the deadline the pregnancy should be terminated is 35 weeks. We present a case of a patient with chronic renal failure, with favorable perinatal outcome.
Takahashi, Toshiaki; Murayama, Ryoko; Oe, Makoto; Nakagami, Gojiro; Tanabe, Hidenori; Yabunaka, Koichi; Arai, Rika; Komiyama, Chieko; Uchida, Miho; Sanada, Hiromi
Short peripheral catheter (SPC) failure is an important clinical problem. The purpose of this study was to clarify the relationship between SPC failure and etiologies such as thrombus, subcutaneous edema, and catheter dislodgment using ultrasonography and to explore the risk factors associated with the etiologies. Two hundred catheters that were in use for infusion, excluding chemotherapy, were observed. Risk factors were examined by logistic regression analysis. Sixty catheters were removed as the result of SPC failure. Frequency of thrombus with subcutaneous edema in SPC failure cases was significantly greater than in those cases where therapy was completed without complications (P < .01). Multivariate analysis demonstrated that 2 or more insertion attempts were significantly associated with thrombus with subcutaneous edema. Results suggest that subsurface skin assessment for catheterization could prevent SPC failure.
Mathis, Michael R; Haydar, Bishr; Taylor, Emma L; Morris, Michelle; Malviya, Shobha V; Christensen, Robert E; Ramachandran, Satya-Krishna; Kheterpal, Sachin
2013-12-01
Although predictors of laryngeal mask airway failure in adults have been elucidated, there remains a paucity of data regarding laryngeal mask airway failure in children. The authors performed a retrospective database review of all pediatric patients who received a laryngeal mask anesthetic at their institution from 2006 to 2010. Device brands were restricted to LMA Unique™ (Cardinal Health, Dublin, OH) and LMA Classic™ (LMA North America, San Diego, CA), and primary outcome was laryngeal mask failure, defined as any airway event requiring device removal and tracheal intubation. Potential risk factors were analyzed with both univariate and multivariate techniques and included medical history, physical examination, surgical, and anesthetic characteristics. Of the 11,910 anesthesia cases performed in the study, 102 cases (0.86%) experienced laryngeal mask failure. Common presenting features of laryngeal mask failures included leak (25%), obstruction (48%), and patient intolerance such as intractable coughing/bucking (11%). Failures occurred before incision in 57% of cases and after incision in 43%. Independent clinical associations included ear/nose/throat surgical procedure, nonoutpatient admission status, prolonged surgical duration, congenital/acquired airway abnormality, and patient transport. The findings of the study support the use of the LMA Unique™ and LMA Classic™ as reliable pediatric supraglottic airway devices, demonstrating relatively low failure rates. Predictors of laryngeal mask airway failure in the pediatric surgical population do not overlap with those in the adult population and should therefore be independently considered.
Distributed Interplanetary Delay/Disruption Tolerant Network (DTN) Monitor and Control System
NASA Technical Reports Server (NTRS)
Wang, Shin-Ywan
2012-01-01
The main purpose of Distributed interplanetary Delay Tolerant Network Monitor and Control System as a DTN system network management implementation in JPL is defined to provide methods and tools that can monitor the DTN operation status, detect and resolve DTN operation failures in some automated style while either space network or some heterogeneous network is infused with DTN capability. In this paper, "DTN Monitor and Control system in Deep Space Network (DSN)" exemplifies a case how DTN Monitor and Control system can be adapted into a space network as it is DTN enabled.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Johnson, Jay Dean; Oberkampf, William Louis; Helton, Jon Craig
2004-12-01
Relationships to determine the probability that a weak link (WL)/strong link (SL) safety system will fail to function as intended in a fire environment are investigated. In the systems under study, failure of the WL system before failure of the SL system is intended to render the overall system inoperational and thus prevent the possible occurrence of accidents with potentially serious consequences. Formal developments of the probability that the WL system fails to deactivate the overall system before failure of the SL system (i.e., the probability of loss of assured safety, PLOAS) are presented for several WWSL configurations: (i) onemore » WL, one SL, (ii) multiple WLs, multiple SLs with failure of any SL before any WL constituting failure of the safety system, (iii) multiple WLs, multiple SLs with failure of all SLs before any WL constituting failure of the safety system, and (iv) multiple WLs, multiple SLs and multiple sublinks in each SL with failure of any sublink constituting failure of the associated SL and failure of all SLs before failure of any WL constituting failure of the safety system. The indicated probabilities derive from time-dependent temperatures in the WL/SL system and variability (i.e., aleatory uncertainty) in the temperatures at which the individual components of this system fail and are formally defined as multidimensional integrals. Numerical procedures based on quadrature (i.e., trapezoidal rule, Simpson's rule) and also on Monte Carlo techniques (i.e., simple random sampling, importance sampling) are described and illustrated for the evaluation of these integrals. Example uncertainty and sensitivity analyses for PLOAS involving the representation of uncertainty (i.e., epistemic uncertainty) with probability theory and also with evidence theory are presented.« less
A study of unstable rock failures using finite difference and discrete element methods
NASA Astrophysics Data System (ADS)
Garvey, Ryan J.
Case histories in mining have long described pillars or faces of rock failing violently with an accompanying rapid ejection of debris and broken material into the working areas of the mine. These unstable failures have resulted in large losses of life and collapses of entire mine panels. Modern mining operations take significant steps to reduce the likelihood of unstable failure, however eliminating their occurrence is difficult in practice. Researchers over several decades have supplemented studies of unstable failures through the application of various numerical methods. The direction of the current research is to extend these methods and to develop improved numerical tools with which to study unstable failures in underground mining layouts. An extensive study is first conducted on the expression of unstable failure in discrete element and finite difference methods. Simulated uniaxial compressive strength tests are run on brittle rock specimens. Stable or unstable loading conditions are applied onto the brittle specimens by a pair of elastic platens with ranging stiffnesses. Determinations of instability are established through stress and strain histories taken for the specimen and the system. Additional numerical tools are then developed for the finite difference method to analyze unstable failure in larger mine models. Instability identifiers are established for assessing the locations and relative magnitudes of unstable failure through measures of rapid dynamic motion. An energy balance is developed which calculates the excess energy released as a result of unstable equilibria in rock systems. These tools are validated through uniaxial and triaxial compressive strength tests and are extended to models of coal pillars and a simplified mining layout. The results of the finite difference simulations reveal that the instability identifiers and excess energy calculations provide a generalized methodology for assessing unstable failures within potentially complex mine models. These combined numerical tools may be applied in future studies to design primary and secondary supports in bump-prone conditions, evaluate retreat mining cut sequences, asses pillar de-stressing techniques, or perform backanalyses on unstable failures in select mining layouts.
Defect induced plasticity and failure mechanism of boron nitride nanotubes under tension
DOE Office of Scientific and Technical Information (OSTI.GOV)
Anoop Krishnan, N. M., E-mail: anoopnm@civil.iisc.ernet.in; Ghosh, Debraj
2014-07-28
The effects of Stone-Wales (SW) and vacancy defects on the failure behavior of boron nitride nanotubes (BNNTs) under tension are investigated using molecular dynamics simulations. The Tersoff-Brenner potential is used to model the atomic interaction and the temperature is maintained close to 300 K. The effect of a SW defect is studied by determining the failure strength and failure mechanism of nanotubes with different radii. In the case of a vacancy defect, the effect of an N-vacancy and a B-vacancy is studied separately. Nanotubes with different chiralities but similar diameter is considered first to evaluate the chirality dependence. The variation ofmore » failure strength with the radius is then studied by considering nanotubes of different diameters but same chirality. It is observed that the armchair BNNTs are extremely sensitive to defects, whereas the zigzag configurations are the least sensitive. In the case of pristine BNNTs, both armchair and zigzag nanotubes undergo brittle failure, whereas in the case of defective BNNTs, only the zigzag ones undergo brittle failure. An interesting defect induced plastic behavior is observed in defective armchair BNNTs. For this nanotube, the presence of a defect triggers mechanical relaxation by bond breaking along the closest zigzag helical path, with the defect as the nucleus. This mechanism results in a plastic failure.« less
[Use of antihypertensive drug therapy and risk of development of congestive heart failure].
Sobrino, Javier; Plana, Jaume; Felip, Angela; Doménech, Mónica; Reth, Peter; Adrián, María Jesús; de la Sierra, Alejandro
2004-09-18
It has been suggested that the use of some antihypertensive agents may favour the development of congestive heart failure. The aim of the present study was to evaluate such a possible association in patients who had a new diagnosis of congestive heart failure. This was a retrospective case-control study of 81 patients who had a first hospital admission with a new diagnosis of congestive heart failure (cases) and 162 patients admitted for other hypertensive complications (controls). Previous antihypertensive drug use was registered and the possible association with congestive heart failure was evaluated. The presence of congestive heart failure was not associated with the use of any antihypertensive drug class. When treatments were grouped in classic (diuretics and betablockers) or modern (calcium channel blockers, angiotensin-converting-enzyme inhibitors, alphablockers or angiotensin receptor blockers), a negative association was observed with the latter group, which was observed in 48.1% of cases and 63.6% of controls (odds ratio: 0.532; 95% confidence interval, 0.310-0.913). This association was lost after adjustment for other cardiovascular risk factors or previous hypertensive complications. The development of congestive heart failure was not associated with the use of any specific antihypertensive drug class. From the present evidence, it is not possible to recommend a specific antihypertensive agent in patients at risk of developing congestive heart failure but without evidence of such disease.
Heroic Reliability Improvement in Manned Space Systems
NASA Technical Reports Server (NTRS)
Jones, Harry W.
2017-01-01
System reliability can be significantly improved by a strong continued effort to identify and remove all the causes of actual failures. Newly designed systems often have unexpected high failure rates which can be reduced by successive design improvements until the final operational system has an acceptable failure rate. There are many causes of failures and many ways to remove them. New systems may have poor specifications, design errors, or mistaken operations concepts. Correcting unexpected problems as they occur can produce large early gains in reliability. Improved technology in materials, components, and design approaches can increase reliability. The reliability growth is achieved by repeatedly operating the system until it fails, identifying the failure cause, and fixing the problem. The failure rate reduction that can be obtained depends on the number and the failure rates of the correctable failures. Under the strong assumption that the failure causes can be removed, the decline in overall failure rate can be predicted. If a failure occurs at the rate of lambda per unit time, the expected time before the failure occurs and can be corrected is 1/lambda, the Mean Time Before Failure (MTBF). Finding and fixing a less frequent failure with the rate of lambda/2 per unit time requires twice as long, time of 1/(2 lambda). Cutting the failure rate in half requires doubling the test and redesign time and finding and eliminating the failure causes.Reducing the failure rate significantly requires a heroic reliability improvement effort.
Lawrence, Braden J; Petersen, Emily L; Riches, Wayne G; Pfeiffer, David C
2018-06-06
Plasmacytomas are rare immunoproliferative monoclonal plasma cell diseases of lymphoid lineage that may present in an isolated or systemic manner. Systemic involvement is much more common than occurrences isolated to a particular organ, and for this reason, it is imperative to rule out systemic involvement for osseous and nonosseous isolated neoplasms. These neoplasms present unique challenges due to their location, extent of involvement, vague presentation, and dearth of treatment protocol. We report the case of a 69-year-old man who developed chronic kidney disease stage 4 between 2009 and 2012. Precipitous kidney failure, anorexia, fatigue, and flank pain necessitated clinical follow-up that ultimately led to thorough imaging and bilateral kidney biopsy. Protein electrophoresis, immunohistochemistry, and immunofluorescence were all consistent with bilateral renal extramedullary plasmacytomas. Treatment recommendations are often limited to prior case successes; however, chemotherapy, radiation, and surgery are the mainstay of treatment. Although surgery or combined therapy provides the best results for patients, such options are unfeasible with bilateral kidney involvement. Therefore, a chemotherapy regimen, similar to that for multiple myeloma, was determined to be most reasonable. Treatment consisted of 4 cycles of a bortezomib, cyclophosphamide, and dexamethasone regimen. Three months following chemotherapy, kidney function returned to baseline levels. Copyright © 2018 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.