Automation of Space Station module power management and distribution system
NASA Technical Reports Server (NTRS)
Bechtel, Robert; Weeks, Dave; Walls, Bryan
1990-01-01
Viewgraphs on automation of space station module (SSM) power management and distribution (PMAD) system are presented. Topics covered include: reasons for power system automation; SSM/PMAD approach to automation; SSM/PMAD test bed; SSM/PMAD topology; functional partitioning; SSM/PMAD control; rack level autonomy; FRAMES AI system; and future technology needs for power system automation.
Space station automation of common module power management and distribution, volume 2
NASA Technical Reports Server (NTRS)
Ashworth, B.; Riedesel, J.; Myers, C.; Jakstas, L.; Smith, D.
1990-01-01
The new Space Station Module Power Management and Distribution System (SSM/PMAD) testbed automation system is described. The subjects discussed include testbed 120 volt dc star bus configuration and operation, SSM/PMAD automation system architecture, fault recovery and management expert system (FRAMES) rules english representation, the SSM/PMAD user interface, and the SSM/PMAD future direction. Several appendices are presented and include the following: SSM/PMAD interface user manual version 1.0, SSM/PMAD lowest level processor (LLP) reference, SSM/PMAD technical reference version 1.0, SSM/PMAD LLP visual control logic representation's (VCLR's), SSM/PMAD LLP/FRAMES interface control document (ICD) , and SSM/PMAD LLP switchgear interface controller (SIC) ICD.
Exercise of the SSM/PMAD Breadboard. [Space Station Module/Power Management And Distribution
NASA Technical Reports Server (NTRS)
Walls, Bryan
1989-01-01
The Space Station Module Power Management and Distribution (SSM/PMAD) Breadboard is a test facility designed for advanced development of space power automation. Originally designed for 20-kHz power, the system is being converted to work with direct current (dc). Power levels are on a par with those expected for a Space Station module. Some of the strengths and weaknesses of the SSM/PMAD system in design and function are examined, and the future directions foreseen for the system are outlined.
Space Station Module Power Management and Distribution System (SSM/PMAD)
NASA Technical Reports Server (NTRS)
Miller, William (Compiler); Britt, Daniel (Compiler); Elges, Michael (Compiler); Myers, Chris (Compiler)
1994-01-01
This report provides an overview of the Space Station Module Power Management and Distribution (SSM/PMAD) testbed system and describes recent enhancements to that system. Four tasks made up the original contract: (1) common module power management and distribution system automation plan definition; (2) definition of hardware and software elements of automation; (3) design, implementation and delivery of the hardware and software making up the SSM/PMAD system; and (4) definition and development of the host breadboard computer environment. Additions and/or enhancements to the SSM/PMAD test bed that have occurred since July 1990 are reported. These include: (1) rehosting the MAESTRO scheduler; (2) reorganization of the automation software internals; (3) a more robust communications package; (4) the activity editor to the MAESTRO scheduler; (5) rehosting the LPLMS to execute under KNOMAD; implementation of intermediate levels of autonomy; (6) completion of the KNOMAD knowledge management facility; (7) significant improvement of the user interface; (8) soft and incipient fault handling design; (9) intermediate levels of autonomy, and (10) switch maintenance.
Managing autonomy levels in the SSM/PMAD testbed. [Space Station Power Management and Distribution
NASA Technical Reports Server (NTRS)
Ashworth, Barry R.
1990-01-01
It is pointed out that when autonomous operations are mixed with those of a manual nature, concepts concerning the boundary of operations and responsibility become clouded. The space station module power management and distribution (SSM/PMAD) automation testbed has the need for such mixed-mode capabilities. The concept of managing the SSM/PMAD testbed in the presence of changing levels of autonomy is examined. A knowledge-based approach to implementing autonomy management in the distributed SSM/PMAD utilizing a centralized planning system is presented. Its knowledge relations and system-wide interactions are discussed, along with the operational nature of the currently functioning SSM/PMAD knowledge-based systems.
Satellite Survivability Module
NASA Astrophysics Data System (ADS)
Buehler, P.; Smith, J.
The Satellite Survivability Module (SSM) is an end-to-end, physics-based, performance prediction model for directed energy engagement of orbiting spacecraft. SSM was created as an add-on module for the Satellite Tool Kit (STK). Two engagement types are currently supported: laser engagement of the focal plane array of an imaging spacecraft; and Radio Frequency (RF) engagement of spacecraft components. This paper will focus on the laser engagement scenario, the process by which it is defined, and how we use this tool to support a future laser threat detection system experiment. For a laser engagement, the user creates a spacecraft, defines its optical system, adds any protection techniques used by the optical system, introduces a laser threat, and then defines the atmosphere through which the laser will pass. SSM models the laser engagement and its impact on the spacecraft's optical system using four impact levels: degradation, saturation, damage, and destruction. Protection techniques, if employed, will mitigate engagement effects. SSM currently supports two laser protection techniques. SSM allows the user to create and implement a variety of "what if" scenarios. Satellites can be placed in a variety of orbits. Threats can be placed anywhere on the Earth or, for version 2.0, on other satellites. Satellites and threats can be mixed and matched to examine possibilities. Protection techniques for a particular spacecraft can be turned on or off individually; and can be arranged in any order to simulate more complicated protection schemes. Results can be displayed as 2-D or 3-D visualizations, or as textual reports. A new report feature available in version 2.0 will allow laser effects data to be displayed dynamically during scenario execution. In order to test SSM capabilities, the Ball team used SSM to model several engagement scenarios for our future laser threat detection system experiment. Actual test sites, along with actual laser, optics, and detector characteristics were entered into SSM to determine what effects we can expect to see, and to what extent. We concluded that SSM results are accurate when compared to actual field test results. The work is currently funded by the Air Force Research Laboratory, Space Vehicles directorate at Kirtland AFB, New Mexico, under contract number FA9453-06-C-0371.
The SSM/PMAD automated test bed project
NASA Technical Reports Server (NTRS)
Lollar, Louis F.
1991-01-01
The Space Station Module/Power Management and Distribution (SSM/PMAD) autonomous subsystem project was initiated in 1984. The project's goal has been to design and develop an autonomous, user-supportive PMAD test bed simulating the SSF Hab/Lab module(s). An eighteen kilowatt SSM/PMAD test bed model with a high degree of automated operation has been developed. This advanced automation test bed contains three expert/knowledge based systems that interact with one another and with other more conventional software residing in up to eight distributed 386-based microcomputers to perform the necessary tasks of real-time and near real-time load scheduling, dynamic load prioritizing, and fault detection, isolation, and recovery (FDIR).
The Space Station Module Power Management and Distribution automation test bed
NASA Technical Reports Server (NTRS)
Lollar, Louis F.
1991-01-01
The Space Station Module Power Management And Distribution (SSM/PMAD) automation test bed project was begun at NASA/Marshall Space Flight Center (MSFC) in the mid-1980s to develop an autonomous, user-supportive power management and distribution test bed simulating the Space Station Freedom Hab/Lab modules. As the test bed has matured, many new technologies and projects have been added. The author focuses on three primary areas. The first area is the overall accomplishments of the test bed itself. These include a much-improved user interface, a more efficient expert system scheduler, improved communication among the three expert systems, and initial work on adding intermediate levels of autonomy. The second area is the addition of a more realistic power source to the SSM/PMAD test bed; this project is called the Large Autonomous Spacecraft Electrical Power System (LASEPS). The third area is the completion of a virtual link between the SSM/PMAD test bed at MSFC and the Autonomous Power Expert at Lewis Research Center.
Kim, Minsoo; Kim, Yejin; Kim, Hyosoo; Piao, Wenhua; Kim, Changwon
2016-06-01
An operator decision support system (ODSS) is proposed to support operators of wastewater treatment plants (WWTPs) in making appropriate decisions. This system accounts for water quality (WQ) variations in WWTP influent and effluent and in the receiving water body (RWB). The proposed system is comprised of two diagnosis modules, three prediction modules, and a scenario-based supporting module (SSM). In the diagnosis modules, the WQs of the influent and effluent WWTP and of the RWB are assessed via multivariate analysis. Three prediction modules based on the k-nearest neighbors (k-NN) method, activated sludge model no. 2d (ASM2d) model, and QUAL2E model are used to forecast WQs for 3 days in advance. To compare various operating alternatives, SSM is applied to test various predetermined operating conditions in terms of overall oxygen transfer coefficient (Kla), waste sludge flow rate (Qw), return sludge flow rate (Qr), and internal recycle flow rate (Qir). In the case of unacceptable total phosphorus (TP), SSM provides appropriate information for the chemical treatment. The constructed ODSS was tested using data collected from Geumho River, which was the RWB, and S WWTP in Daegu City, South Korea. The results demonstrate the capability of the proposed ODSS to provide WWTP operators with more objective qualitative and quantitative assessments of WWTP and RWB WQs. Moreover, the current study shows that ODSS, using data collected from the study area, can be used to identify operational alternatives through SSM at an integrated urban wastewater management level.
Six-state phase modulation for reduced crosstalk in a fiber optic gyroscope.
Zhang, Chunxi; Zhang, Shaobo; Pan, Xiong; Jin, Jing
2018-04-16
Electrical crosstalk in an interferometric fiber-optic gyroscope (IFOG) is regarded as the most significant factor influencing dead bands. Here, we present a six-state modulation (SSM) technique to reduce crosstalk. Compared to conventional four-state modulation (FSM) or square-wave modulation (SWM), the SSM reduces the correlation between modulation voltage and demodulation reference by separating their fundamental frequencies, and thus reduces the bias error induced by crosstalk. The measured dead band of a 1500-m IFOG is approximately 0.02 °/h using FSM and approximately 0.08 °/h using SWM, whereas there is no evidence of dead band using SSM. The IFOG using SSM also exhibits better angular random walk (ARW) and bias instability performance compared to the same IFOG using FSM or SWM. These results verify the crosstalk reduction effect of SSM. In theory, by using the relative intensity noise (RIN) suppressing technique with the optimal modulation depth of 2π/3, the SSM can eliminate the crosstalk, which offers the potential for a high-performance IFOG with low noise, high sensitivity, wide dynamic range, and no dead band.
Modeling Laser Effects on Imaging Spacecraft Using the SSM
NASA Astrophysics Data System (ADS)
Buehler, P.; Smith, J.; Farmer, J.; Bonn, D.
The Satellite Survivability Module (SSM) is an end-to-end, physics-based, performance prediction model for directed energy engagement of orbiting spacecraft. Two engagement types are currently supported: laser engagement of the focal plane array of an imaging spacecraft; and Radio Frequency (RF) engagement of spacecraft components. For laser engagements, the user creates a spacecraft, its optical system, any protection techniques used by the optical system, a laser threat, and an atmosphere through which the laser will pass. For RF engagements, the user creates a spacecraft (as a set of subsystem components), any protection techniques, and an RF source. SSM then models the engagement and its impact on the spacecraft using four impact levels: degradation, saturation, damage, and destruction. Protection techniques, if employed, will mitigate engagement effects. SSM currently supports several two laser and three RF protection techniques. SSM allows the user to create and implement a variety of "what if" scenarios. Satellites can be placed in a variety of orbits. Threats can be placed anywhere on the Earth. Satellites and threats can be mixed and matched to examine possibilities. Protection techniques for a particular spacecraft can be turned on or off individually; and can be arranged in any order to simulate more complicated protection schemes. Results can be displayed as 2-D or 3-D visualizations, or as textual reports. In order to test SSM capabilities, the Ball team used it to model engagement scenarios for a space experiment scheduled for the 2011 time frame. SSM was created by Ball Aerospace & Technologies Corp. Systems Engineering Solutions in Albuquerque, New Mexico as an add-on module for the Satellite Tool Kit (STK). The current version of SSM (1.0) interfaces with STK through the Programmer's Library (STK/PL). Future versions of SSM will employ STK/Connect to provide the user access to STK functionality. The work is currently funded by the Air Force Research Laboratory, Space Vehicles directorate at Kirtland AFB, New Mexico, under contract number FA9453-06-C-0096.
User interface design principles for the SSM/PMAD automated power system
NASA Technical Reports Server (NTRS)
Jakstas, Laura M.; Myers, Chris J.
1991-01-01
Martin Marietta has developed a user interface for the space station module power management and distribution (SSM/PMAD) automated power system testbed which provides human access to the functionality of the power system, as well as exemplifying current techniques in user interface design. The testbed user interface was designed to enable an engineer to operate the system easily without having significant knowledge of computer systems, as well as provide an environment in which the engineer can monitor and interact with the SSM/PMAD system hardware. The design of the interface supports a global view of the most important data from the various hardware and software components, as well as enabling the user to obtain additional or more detailed data when needed. The components and representations of the SSM/PMAD testbed user interface are examined. An engineer's interactions with the system are also described.
Intermediate Levels of Autonomy within the SSM/PMAD Breadboard
NASA Technical Reports Server (NTRS)
Dugal-Whitehead, Norma R.; Walls, Bryan
1995-01-01
The Space Station Module Power Management and Distribution (SSM/PMAD) bread-board is a test bed for the development of advanced power system control and automation. Software control in the SSM/PMAD breadboard is through co-operating systems, called Autonomous Agents. Agents can be a mixture of algorithmic software and expert systems. The early SSM/PMAD system was envisioned as being completely autonomous. It soon became apparent, though, that there would always be a need for human intervention, at least as long as a human interacts with the system in any way. In a system designed only for autonomous operation, manual intervention meant taking full control of the whole system, and loosing whatever expertise was in the system. Several methods for allowing humans to interact at an appropriate level of control were developed. This paper examines some of these intermediate modes of autonomy. The least humanly intrusive mode is simple monitoring. The ability to modify future behavior by altering a schedule involves high-level interaction. Modification of operating activities comes next. The coarsest mode of control is individual, unplanned operation of individual Power System components. Each of these levels is integrated into the SSM/PMAD breadboard, with support for the user (such as warnings of the consequences of control decisions) at every level.
A third-order class-D amplifier with and without ripple compensation
NASA Astrophysics Data System (ADS)
Cox, Stephen M.; du Toit Mouton, H.
2018-06-01
We analyse the nonlinear behaviour of a third-order class-D amplifier, and demonstrate the remarkable effectiveness of the recently introduced ripple compensation (RC) technique in reducing the audio distortion of the device. The amplifier converts an input audio signal to a high-frequency train of rectangular pulses, whose widths are modulated according to the input signal (pulse-width modulation) and employs negative feedback. After determining the steady-state operating point for constant input and calculating its stability, we derive a small-signal model (SSM), which yields in closed form the transfer function relating (infinitesimal) input and output disturbances. This SSM shows how the RC technique is able to linearise the small-signal response of the device. We extend this SSM through a fully nonlinear perturbation calculation of the dynamics of the amplifier, based on the disparity in time scales between the pulse train and the audio signal. We obtain the nonlinear response of the amplifier to a general audio signal, avoiding the linearisation inherent in the SSM; we thereby more precisely quantify the reduction in distortion achieved through RC. Finally, simulations corroborate our theoretical predictions and illustrate the dramatic deterioration in performance that occurs when the amplifier is operated in an unstable regime. The perturbation calculation is rather general, and may be adapted to quantify the way in which other nonlinear negative-feedback pulse-modulated devices track a time-varying input signal that slowly modulates the system parameters.
Technicians complete assembly of Hubble Space Telescope (HST) mockup at JSC
NASA Technical Reports Server (NTRS)
1989-01-01
Technicians complete assembly of the Hubble Space Telescope (HST) mockup at JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A. In the foreground, a technician holds the controls for an overhead crane attached to one of the HST's high gain antennas (HGAs). Technicians on the ground prepare the HGA to be hoisted into position on the mockup's Support System Module (SSM) forward shell as others work on SSM from a cherry picker.
Preliminary design for a standard 10 sup 7 bit Solid State Memory (SSM)
NASA Technical Reports Server (NTRS)
Hayes, P. J.; Howle, W. M., Jr.; Stermer, R. L., Jr.
1978-01-01
A modular concept with three separate modules roughly separating bubble domain technology, control logic technology, and power supply technology was employed. These modules were respectively the standard memory module (SMM), the data control unit (DCU), and power supply module (PSM). The storage medium was provided by bubble domain chips organized into memory cells. These cells and the circuitry for parallel data access to the cells make up the SMM. The DCU provides a flexible serial data interface to the SMM. The PSM provides adequate power to enable one DCU and one SMM to operate simultaneously at the maximum data rate. The SSM was designed to handle asynchronous data rates from dc to 1.024 Mbs with a bit error rate less than 1 error in 10 to the eight power bits. Two versions of the SSM, a serial data memory and a dual parallel data memory were specified using the standard modules. The SSM specification includes requirements for radiation hardness, temperature and mechanical environments, dc magnetic field emission and susceptibility, electromagnetic compatibility, and reliability.
STS-31 Hubble Space Telescope (HST) solar array (SA) deploy aboard OV-103
1990-04-25
During STS-31, the Hubble Space Telescope (HST) is held in appendage deploy position by Discovery's, Orbiter Vehicle (OV) 103's, remote manipulator system (RMS) above the payload bay (PLB) and crew compartment cabin. While in this position the solar array (SA) wing bistem cassette (HST center) is deployed from its stowed location along side the Support System Module (SSM) forward shell. A high gain antenna (HGA) remains stowed along the SSM. The Earth's surface and the Earth limb creates a dramatic backdrop.
Priority scheme planning for the robust SSM/PMAD testbed
NASA Technical Reports Server (NTRS)
Elges, Michael R.; Ashworth, Barry R.
1991-01-01
Whenever mixing priorities of manually controlled resources with those of autonomously controlled resources, the space station module power management and distribution (SSM/PMAD) environment requires cooperating expert system interaction between the planning function and the priority manager. The elements and interactions of the SSM/PMAD planning and priority management functions are presented. Their adherence to cooperating for common achievement are described. In the SSM/PMAD testbed these actions are guided by having a system planning function, KANT, which has insight to the executing system and its automated database. First, the user must be given access to all information which may have an effect on the desired outcome. Second, the fault manager element, FRAMES, must be informed as to the change so that correct diagnoses and operations take place if and when faults occur. Third, some element must engage as mediator for selection of resources and actions to be added or removed at the user's request. This is performed by the priority manager, LPLMS. Lastly, the scheduling mechanism, MAESTRO, must provide future schedules adhering to the user modified resource base.
Space station common module network topology and hardware development
NASA Technical Reports Server (NTRS)
Anderson, P.; Braunagel, L.; Chwirka, S.; Fishman, M.; Freeman, K.; Eason, D.; Landis, D.; Lech, L.; Martin, J.; Mccorkle, J.
1990-01-01
Conceptual space station common module power management and distribution (SSM/PMAD) network layouts and detailed network evaluations were developed. Individual pieces of hardware to be developed for the SSM/PMAD test bed were identified. A technology assessment was developed to identify pieces of equipment requiring development effort. Equipment lists were developed from the previously selected network schematics. Additionally, functional requirements for the network equipment as well as other requirements which affected the suitability of specific items for use on the Space Station Program were identified. Assembly requirements were derived based on the SSM/PMAD developed requirements and on the selected SSM/PMAD network concepts. Basic requirements and simplified design block diagrams are included. DC remote power controllers were successfully integrated into the DC Marshall Space Flight Center breadboard. Two DC remote power controller (RPC) boards experienced mechanical failure of UES 706 stud-mounted diodes during mechanical installation of the boards into the system. These broken diodes caused input to output shorting of the RPC's. The UES 706 diodes were replaced on these RPC's which eliminated the problem. The DC RPC's as existing in the present breadboard configuration do not provide ground fault protection because the RPC was designed to only switch the hot side current. If ground fault protection were to be implemented, it would be necessary to design the system so the RPC switched both the hot and the return sides of power.
Hubble Space Telescope (HST) at Lockheed Facility during preflight assembly
1988-03-31
A mechanical arm positions the axial scientific instrument (SI) module (orbital replacement unit (ORU)) just outside the open doors of the Hubble Space Telescope (HST) Support System Module (SSM) as clean-suited technicians oversee the process. HST assembly is being completed at the Lockheed Facility in Sunnyvale, California.
Technicians complete assembly of Hubble Space Telescope (HST) mockup at JSC
NASA Technical Reports Server (NTRS)
1989-01-01
A technician listens to instructions as he operates the controls for the overhead crane that is lifting one of the Hubble Space Telescope (HST) high gain antennas (HGAs) into place on the HST Support System Module (SSM) forward shell. Others in a cherry picker basket wait to install the HGA on the SSM mockup. The HST mockup will be used for astronaut training and is being assembled in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A.
Modular closed-loop control of diabetes.
Patek, S D; Magni, L; Dassau, E; Karvetski, C; Toffanin, C; De Nicolao, G; Del Favero, S; Breton, M; Man, C Dalla; Renard, E; Zisser, H; Doyle, F J; Cobelli, C; Kovatchev, B P
2012-11-01
Modularity plays a key role in many engineering systems, allowing for plug-and-play integration of components, enhancing flexibility and adaptability, and facilitating standardization. In the control of diabetes, i.e., the so-called "artificial pancreas," modularity allows for the step-wise introduction of (and regulatory approval for) algorithmic components, starting with subsystems for assured patient safety and followed by higher layer components that serve to modify the patient's basal rate in real time. In this paper, we introduce a three-layer modular architecture for the control of diabetes, consisting in a sensor/pump interface module (IM), a continuous safety module (CSM), and a real-time control module (RTCM), which separates the functions of insulin recommendation (postmeal insulin for mitigating hyperglycemia) and safety (prevention of hypoglycemia). In addition, we provide details of instances of all three layers of the architecture: the APS© serving as the IM, the safety supervision module (SSM) serving as the CSM, and the range correction module (RCM) serving as the RTCM. We evaluate the performance of the integrated system via in silico preclinical trials, demonstrating 1) the ability of the SSM to reduce the incidence of hypoglycemia under nonideal operating conditions and 2) the ability of the RCM to reduce glycemic variability.
Augmentation of the space station module power management and distribution breadboard
NASA Technical Reports Server (NTRS)
Walls, Bryan; Hall, David K.; Lollar, Louis F.
1991-01-01
The space station module power management and distribution (SSM/PMAD) breadboard models power distribution and management, including scheduling, load prioritization, and a fault detection, identification, and recovery (FDIR) system within a Space Station Freedom habitation or laboratory module. This 120 VDC system is capable of distributing up to 30 kW of power among more than 25 loads. In addition to the power distribution hardware, the system includes computer control through a hierarchy of processes. The lowest level consists of fast, simple (from a computing standpoint) switchgear that is capable of quickly safing the system. At the next level are local load center processors, (LLP's) which execute load scheduling, perform redundant switching, and shed loads which use more than scheduled power. Above the LLP's are three cooperating artificial intelligence (AI) systems which manage load prioritizations, load scheduling, load shedding, and fault recovery and management. Recent upgrades to hardware and modifications to software at both the LLP and AI system levels promise a drastic increase in speed, a significant increase in functionality and reliability, and potential for further examination of advanced automation techniques. The background, SSM/PMAD, interface to the Lewis Research Center test bed, the large autonomous spacecraft electrical power system, and future plans are discussed.
NASA Technical Reports Server (NTRS)
Doreswamy, Rajiv
1990-01-01
The Marshall Space Flight Center (MSFC) owns and operates a space station module power management and distribution (SSM-PMAD) testbed. This system, managed by expert systems, is used to analyze and develop power system automation techniques for Space Station Freedom. The Lewis Research Center (LeRC), Cleveland, Ohio, has developed and implemented a space station electrical power system (EPS) testbed. This system and its power management controller are representative of the overall Space Station Freedom power system. A virtual link is being implemented between the testbeds at MSFC and LeRC. This link would enable configuration of SSM-PMAD as a load center for the EPS testbed at LeRC. This connection will add to the versatility of both systems, and provide an environment of enhanced realism for operation of both testbeds.
Modular Closed-Loop Control of Diabetes
Magni, L.; Dassau, E.; Hughes-Karvetski, C.; Toffanin, C.; De Nicolao, G.; Del Favero, S.; Breton, M.; Man, C. Dalla; Renard, E.; Zisser, H.; Doyle, F. J.; Cobelli, C.; Kovatchev, B. P.
2015-01-01
Modularity plays a key role in many engineering systems, allowing for plug-and-play integration of components, enhancing flexibility and adaptability, and facilitating standardization. In the control of diabetes, i.e., the so-called “artificial pancreas,” modularity allows for the step-wise introduction of (and regulatory approval for) algorithmic components, starting with subsystems for assured patient safety and followed by higher layer components that serve to modify the patient’s basal rate in real time. In this paper, we introduce a three-layer modular architecture for the control of diabetes, consisting in a sensor/pump interface module (IM), a continuous safety module (CSM), and a real-time control module (RTCM), which separates the functions of insulin recommendation (postmeal insulin for mitigating hyperglycemia) and safety (prevention of hypoglycemia). In addition, we provide details of instances of all three layers of the architecture: the APS© serving as the IM, the safety supervision module (SSM) serving as the CSM, and the range correction module (RCM) serving as the RTCM. We evaluate the performance of the integrated system via in silico preclinical trials, demonstrating 1) the ability of the SSM to reduce the incidence of hypoglycemia under nonideal operating conditions and 2) the ability of the RCM to reduce glycemic variability. PMID:22481809
NASA Technical Reports Server (NTRS)
Watson, Karen
1990-01-01
The Space Station Module/Power Management and Distribution (SSM/PMAD) testbed was developed to study the tertiary power management on modules in large spacecraft. The main goal was to study automation techniques, not necessarily develop flight ready systems. Because of the confidence gained in many of automation strategies investigated, it is appropriate to study, in more detail, implementation strategies in order to find better trade-offs for nearer to flight ready systems. These trade-offs particularly concern the weight, volume, power consumption, and performance of the automation system. These systems, in their present implementation are described.
Undergraduate Medical Education Research in Malaysia: Time for a Change
Salam, Abdus; Hamzah, Jemaima Che; Chin, Tan Geok; Siraj, Harlina Halizah; Idrus, Ruszymah; Mohamad, Nabishah; Raymond, Azman Ali
2015-01-01
Objective: Special Study Module (SSM) is a mandatory research module implemented in Universiti Kebangsaan Malaysia (UKM). The objective of this paper is to provide a brief overview on the student research activities and to find out the outcome measures in terms of publication. Methods: It was a retrospective study done on SSM research projects at UKM. The SSM research is conducted from beginning of year-4 until 1st seven weeks of year-5. In year-4, students are assigned to a faculty-supervisor in small groups and spend every Thursday afternoon to plan and carry the research. Whole first seven weeks of year-5, students are placed with their supervisor continuously to collect data, do analysis, write report and present in the scientific conference. Outcomes of 5-years SSM research-projects starting from 2008/2009 to 2012/2013 academic session were analyzed. Results: Total 257 projects were completed and presented in annual scientific meetings from which 57 (22.2%) articles were published in peer reviewed journals. Conclusion: Mandatory undergraduate student research project brings an opportunity to develop students’ capacity building from conception to final report writing and thereby narrowing the gap between education and practice. Medical schools should implement research module to bring changes in research and publication culture of undergraduate medical education. PMID:26150832
Maturity Assessment of Space Plug-and-Play Architecture
2013-03-01
SSM SPA Service Module SRL System Readiness Level TAT Time-at-Tone TRA Technology Readiness Assessment TRL Technology Readiness Level USB Universal...maturity assessment—the Technology Readiness Level (TRL) process, the Integration Readiness Level (IRL) process, and the System Readiness Level ( SRL ...is an important hallmark of the SPA concept, and makes possible the composability and scalability of system designs that employ it. 14 4. SPA
NASA Technical Reports Server (NTRS)
Ashworth, Barry R.
1989-01-01
A description is given of the SSM/PMAD power system automation testbed, which was developed using a systems engineering approach. The architecture includes a knowledge-based system and has been successfully used in power system management and fault diagnosis. Architectural issues which effect overall system activities and performance are examined. The knowledge-based system is discussed along with its associated automation implications, and interfaces throughout the system are presented.
Mitsuishi, Tsuyoshi; Kabashima, Kenji; Tanizaki, Hideaki; Ohsawa, Ikuroh; Oda, Fumino; Yamada, Yuko; Halifu, Yilinuer; Kawana, Seiji; Kato, Toshihiko; Iida, Kazumi
2011-09-01
Specific substance of Maruyama (SSM) is a carcinostatic immunotherapeutic agent extracted from Mycobacterium tuberculosis. The efficacy of SSM induced interleukin(IL)-12 and IFN-γ production, and inhibition of IL-4, resulting in a shift from Th2 to Th1 in vivo. The DS-Nh mice are a model of human atopic dermatitis (AD), which spontaneously develop dermatitis under conventional conditions. In this study, to determine whether SSM can prevent the development of skin lesions in a murine model of AD. DS-Nh mice were injected with SSM 5 days per week for 11 weeks. Pharmacological, histological and serological studies were performed to investigate the therapeutic effect of SSM for DS-Nh mice. Analysis of cytokines responses to SSM using quantitative RT-PCR and flow cytometry were also performed to evaluate their therapeutic mechanisms in these AD model mice. Clinically, erythema, erosions, excoriation, and edema were observed in DS-Nh mice at 16 weeks of age, which advanced with age. Histologically, the relative number of mast cells increased in DS-Nh mice. SSM treatment alleviated the clinical and histological findings in accord with reduced serum IgE level, and increased IgG2a level. TSLP expression was not induced, but IL-1β, IL-12, IL-17A, and IFN-γ were induced in SSM-treated DS-Nh mice. Overall, SSM treatments increased the number of activated DCs in lesions. SSM induced CD80, CD86, and MHC class II expression on bone marrow-derived DCs. SSM enhanced IL-12 production, but suppressed TSLP expression, resulting in a shift from Th2 to Th1 responses. This shift suppressed AD-like skin lesions in a similar fashion as the BCG vaccine. Therefore, SSM may be a useful adjuvant for suppressing skin lesions in AD models. Copyright © 2011 Japanese Society for Investigative Dermatology. Published by Elsevier Ireland Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Freeman, Kenneth A.; Walsh, Rick; Weeks, David J.
1988-01-01
Space Station issues in fault management are discussed. The system background is described with attention given to design guidelines and power hardware. A contractually developed fault management system, FRAMES, is integrated with the energy management functions, the control switchgear, and the scheduling and operations management functions. The constraints that shaped the FRAMES system and its implementation are considered.
Real-time contingency handling in MAESTRO
NASA Technical Reports Server (NTRS)
Britt, Daniel L.; Geoffroy, Amy L.
1992-01-01
A scheduling and resource management system named MAESTRO was interfaced with a Space Station Module Power Management and Distribution (SSM/PMAD) breadboard at MSFC. The combined system serves to illustrate the integration of planning, scheduling, and control in a realistic, complex domain. This paper briefly describes the functional elements of the combined system, including normal and contingency operational scenarios, then focusses on the method used by the scheduler to handle real-time contingencies.
Modulation of SSM/I microwave soil radiances by rainfall
NASA Technical Reports Server (NTRS)
Heymsfield, Gerald M.; Fulton, Richard
1992-01-01
The feasibility of using SSM/I satellite data for estimating the soil moisture content was investigated by correlating the rainfall and soil moisture data with values of the SSM/I microwave brightness temperature obtained for the lower Great Plains in the United States during 1987. It was found that the areas of lowest brightness temperatures coincided with regions of bare soil which had received significant rainfall. The time-history plots of the brightness temperature and the antecedent precipitation index during an extremely large rain event indicated a slow recovery period (about 15 days) back to the dry soil state. However, regions covered with vegetation showed smaller temperature drops and much weaker correlation with rain events, questioning the feasibility of using SSM/I measurements for estimations of soil moisture in regions containing vegetation-covered soil.
Satomura, K; Yin, M; Sekiyama, T; Fujisaki, S; Aramaki, T; Okumura, H; Ohmoto, Y
2000-08-01
Twenty-three patients with HBe antigen-positive chronic hepatitis B were treated with capitalite first letters Maruyama (SSM). HBe antigen turned negative in 15 patients. The levels of various cytokines in pre- and post-treatment frozen serum samples from six patients whose HBe antigen turned negative and from five whose HBe antigen did not were examined. Reduction of serum interleukin (IL) -10 level to below 20 pg/ml was observed after SSM treatment in four of the six patients whose HBe antigen turned negative. SSM was found to stimulate the production of interferon (IFN) -gamma in peripheral blood cells from two healthy volunteers. This stimulatory effect was confirmed in 12 out of 24 healthy volunteers. SSM augmented the production of IFN-gamma in eight out of 10 patients with chronic hepatitis B and nine of 10 with hepatitis C. These results demonstrate for the first time that SSM stimulates the production of IFN-gamma in human peripheral blood cells and also suggest that treatment of HBe antigen-positive chronic hepatitis B patients with SSM leads to the clearance of HBe antigen and normalization of serum aspartate aminotransferase levels through inhibition of IL-10 and stimulation of IFN-gamma.
Naishadham, Krishna; Piou, Jean E; Ren, Lingyun; Fathy, Aly E
2016-12-01
Ultra wideband (UWB) Doppler radar has many biomedical applications, including remote diagnosis of cardiovascular disease, triage and real-time personnel tracking in rescue missions. It uses narrow pulses to probe the human body and detect tiny cardiopulmonary movements by spectral analysis of the backscattered electromagnetic (EM) field. With the help of super-resolution spectral algorithms, UWB radar is capable of increased accuracy for estimating vital signs such as heart and respiration rates in adverse signal-to-noise conditions. A major challenge for biomedical radar systems is detecting the heartbeat of a subject with high accuracy, because of minute thorax motion (less than 0.5 mm) caused by the heartbeat. The problem becomes compounded by EM clutter and noise in the environment. In this paper, we introduce a new algorithm based on the state space method (SSM) for the extraction of cardiac and respiration rates from UWB radar measurements. SSM produces range-dependent system poles that can be classified parametrically with spectral peaks at the cardiac and respiratory frequencies. It is shown that SSM produces accurate estimates of the vital signs without producing harmonics and inter-modulation products that plague signal resolution in widely used FFT spectrograms.
The use of soft system methodology (SSM) in a serviced-focussed study on the personal tutor's role.
Por, Jitna
2008-09-01
Soft system methodology (SSM) is described as a system-based methodology for tackling real world problems. SSM may be used as a means of articulating complex social processes in a particular way. SSM allows peoples' viewpoints and assumptions about the world to be bought to light, challenged and tested. This paper reports on the use of SSM in a service-focussed study (SFS) to explore the role of a personal tutor in nurse education. [Checkland, P., 1981. Systems Thinking Systems Practice. John Wiley and Sons, Chichester] highlighted the importance of considering cultural, social and political systems in the analysis. The seven stages of SSM are discussed in relation to the SFS and some of the findings are expressed through a 'Rich Picture'. It encourages commitment, brings diverse interests together and opens up the organizational culture. It also enables feasible and desirable changes to be recommended within the context of limited resources and competing demands upon lecturers' time. The SSM was an appropriate systematic model for this study and could be potentially useful in nurse education research.
40 CFR Table 4 to Subpart Hhhhhhh... - Applicability of the General Provisions to Part 63
Code of Federal Regulations, 2013 CFR
2013-07-01
... to develop SSM plan for continuous monitoring systems No. § 63.8(c)(5) Continuous opacity monitoring... to an SSM plan. SSM plans are not required § 63.8(e) Continuous monitoring systems performance...)(iv), (b)(2)(v) Actions taken to minimize emissions during SSM No. § 63.10(b)(2)(vi) Recordkeeping for...
40 CFR Table 4 to Subpart Hhhhhhh... - Applicability of the General Provisions to Part 63
Code of Federal Regulations, 2014 CFR
2014-07-01
... SSM plan for continuous monitoring systems No. § 63.8(c)(5) Continuous opacity monitoring system...) Written procedures for continuous monitoring systems Yes, except for last sentence, which refers to an SSM plan. SSM plans are not required § 63.8(e) Continuous monitoring systems performance evaluation Yes...
Hubble Space Telescope (HST) high gain antenna (HGA) deployment during STS-31
1990-04-25
Held in appendage deploy position, the Hubble Space Telescope's (HST's) high gain antenna (HGA) has been released from its stowed position along the Support System Module (SSM) forward shell. The STS-31 crew aboard Discovery, Orbiter Vehicle (OV) oversees the automatic HGA deployment prior to releasing HST. HST HGA is backdropped against the blackness of space.
Hubble Space Telescope (HST) above OV-103's PLB during STS-31 deployment
1990-04-25
The Hubble Space Telescope (HST) is raised above the payload bay (PLB) in low hover position during STS-31 checkout and pre-deployment procedures aboard Discovery, Orbiter Vehicle (OV) 103. Stowed along the HST Support System Module (SSM) are the high gain antenna (HGA) (center) and the two solar arrays (one either side). In the background are the orbital maneuvering system (OMS) pods and the Earth's surface.
STS-31 pre-deployment checkout of the Hubble Space Telescope (HST) on OV-103
1990-04-25
The Hubble Space Telescope (HST), grappled by Discovery's, Orbiter Vehicle (OV) 103's, remote manipulator system (RMS), is oriented in a 90 degree pitch position during STS-31 pre-deployment checkout procedures. The solar array (SA) panel (center) and high gain antennae (HGA) (on either side) are stowed along the Support System Module (SSM) forward shell prior to deployment. The sun highlights HST against the blackness of space.
Automation of the space station core module power management and distribution system
NASA Technical Reports Server (NTRS)
Weeks, David J.
1988-01-01
Under the Advanced Development Program for Space Station, Marshall Space Flight Center has been developing advanced automation applications for the Power Management and Distribution (PMAD) system inside the Space Station modules for the past three years. The Space Station Module Power Management and Distribution System (SSM/PMAD) test bed features three artificial intelligence (AI) systems coupled with conventional automation software functioning in an autonomous or closed-loop fashion. The AI systems in the test bed include a baseline scheduler/dynamic rescheduler (LES), a load shedding management system (LPLMS), and a fault recovery and management expert system (FRAMES). This test bed will be part of the NASA Systems Autonomy Demonstration for 1990 featuring cooperating expert systems in various Space Station subsystem test beds. It is concluded that advanced automation technology involving AI approaches is sufficiently mature to begin applying the technology to current and planned spacecraft applications including the Space Station.
Sea Level Trend and Variability in the Straits of Singapore and Malacca
NASA Astrophysics Data System (ADS)
Luu, Q.; Tkalich, P.
2013-12-01
The Straits of Singapore and Malacca (SSM) connect the Andaman Sea located northeast of the Indian Ocean to the South China Sea, the largest marginal sea situated in the tropical Pacific Ocean. Consequently, sea level in the SSM is assumed to be governed by various regional phenomena associated with the adjacent parts of Indian and Pacific Oceans. At annual scale sea level variability is dominant by the Asian monsoon. Interannual sea level signals are modulated by the El Niño-Southern Oscillation (ENSO) and the Indian Ocean Dipole (IOD). In the long term, regional sea level is driven by the global climate change. However, relative impacts of these multi-scale phenomena on regional sea level in the SSM are yet to be quantified. In present study, publicly available tide gauge records and satellite altimetry data are used to derive long-term sea level trend and variability in SSM. We used the data from research-quality stations, including four located in the Singapore Strait (Tanjong Pagar, Raffles Lighthouse, Sultan Shoal and Sembawang) and seven situated in the Malacca Strait (Kelang, Keling, Kukup, Langkawji, Lumut, Penang and Ko Taphao Noi), each one having 25-39 year data up to the year 2011. Harmonic analysis is performed to filter out astronomic tides from the tide gauge records when necessary; and missing data are reconstructed using identified relationships between sea level and the governing phenomena. The obtained sea level anomalies (SLAs) and reconstructed mean sea level are then validated against satellite altimetry data from AVISO. At multi-decadal scale, annual measured sea level in the SSM is varying with global mean sea level, rising for the period 1984-2009 at the rate 1.8-2.3 mm/year in the Singapore Strait and 1.1-2.8 mm/year in the Malacca Strait. Interannual regional sea level drops are associated with El Niño events, while the rises are correlated with La Niña episodes; both variations are in the range of ×5 cm with correlation coefficient of -0.7 (in correspondence with the Multivariate ENSO Index). The IOD modulates interannual sea level variability only in the Malacca Strait in the range of ×3 cm with a correlation coefficient of -0.6 (with respect to the Dipole Mode Index). At annual scale, SLAs in the SSM are mainly monsoon-driven; of the order of 20 cm. Mean sea level in the Singapore Strait reach the peak during northeast monsoon and trough during southwest monsoon; while these in the Malacca Strait are highest at middle of both monsoons and lowest during their transitional monsoonal seasons. Global and regional signals are quantitatively captured in the SSM. In comparison with the global sea level trends, SSM sea level rise are larger for recent decades 1984-2009. Taking into account the rough estimate of land subsidence rates in Singapore (2006-2011) and Peninsular Malaysia (1994-2004), the trend of absolute sea level rise in SSM follows regional tendency. At interannual scale, ENSO modulates sea level variabilities in the entire SSM region, while IOD affects the Malacca Strait only. At annual scale, sea level responds differently to the Asian monsoon: quasi-periodic cycles are observed twice a year in the Malacca Strait, but once a year in the Singapore Strait. Such behavior implies that the narrow channel constriction between the Singapore and Malacca Straits may be a reason of different variability of sea level in the domains.
A statistical shape model of the human second cervical vertebra.
Clogenson, Marine; Duff, John M; Luethi, Marcel; Levivier, Marc; Meuli, Reto; Baur, Charles; Henein, Simon
2015-07-01
Statistical shape and appearance models play an important role in reducing the segmentation processing time of a vertebra and in improving results for 3D model development. Here, we describe the different steps in generating a statistical shape model (SSM) of the second cervical vertebra (C2) and provide the shape model for general use by the scientific community. The main difficulties in its construction are the morphological complexity of the C2 and its variability in the population. The input dataset is composed of manually segmented anonymized patient computerized tomography (CT) scans. The alignment of the different datasets is done with the procrustes alignment on surface models, and then, the registration is cast as a model-fitting problem using a Gaussian process. A principal component analysis (PCA)-based model is generated which includes the variability of the C2. The SSM was generated using 92 CT scans. The resulting SSM was evaluated for specificity, compactness and generalization ability. The SSM of the C2 is freely available to the scientific community in Slicer (an open source software for image analysis and scientific visualization) with a module created to visualize the SSM using Statismo, a framework for statistical shape modeling. The SSM of the vertebra allows the shape variability of the C2 to be represented. Moreover, the SSM will enable semi-automatic segmentation and 3D model generation of the vertebra, which would greatly benefit surgery planning.
STS-31 pre-deployment checkout of the Hubble Space Telescope (HST) on OV-103
1990-04-25
View taken through overhead window W7 aboard Discovery, Orbiter Vehicle (OV) 103, shows the Hubble Space Telescope (HST) grappled by the remote manipulator system (RMS) and held in a 90 degree pitch position against the blackness of space. The solar array (SA) panel (center) and the high gain antennae (HGA) (on either side) are visible along the Support System Module (SSM) forward shell prior to deployment during STS-31.
Hubble Space Telescope (HST) grappled by OV-103's RMS during STS-31 checkout
1990-04-25
The Hubble Space Telescope (HST), grappled by Discovery's, Orbiter Vehicle (OV) 103's, remote manipulator system (RMS), is held in a pre-deployment position. During STS-31 checkout procedures, the solar array (SA) panels and the high gain antennae (HGA) will be deployed. The starboard SA (center) and the two HGA are stowed along side the Support System Module (SSM) forward shell. The sun highlights HST against the blackness of space.
STS-31 Hubble Space Telescope (HST) solar array panel deploy aboard OV-103
1990-04-25
Held in appendage deploy position by Discovery's, Orbiter Vehicle (OV) 103's, remote manipulator system (RMS), the Hubble Space Telescope's (HST's) starboard solar array (SA) bistem cassette is released from its stowed position on the Support System Module (SSM) forward shell. The spreader bar & bistem begin to unfurl the SA wing. View was taken by an STS-31 crewmember through an overhead window & is backdropped against the surface of the Earth.
STS-31 pre-deployment checkout of the Hubble Space Telescope (HST) on OV-103
1990-04-25
During STS-31 checkout, the Hubble Space Telescope (HST) is held in a pre-deployment position by Discovery's, Orbiter Vehicle (OV) 103's, remote manipulator system (RMS). The view, taken from the crew cabin overhead window W7, shows the starboard solar array (SA) panel (center) and two high gain antennae (HGA) (on either side) stowed along side the Support System Module (SSM) forward shell. The sun highlights HST against the blackness of space.
Case Study on Project Risk Management Planning Based on Soft System Methodology
NASA Astrophysics Data System (ADS)
Lifang, Xie; Jun, Li
This paper analyzed the soft system characters of construction projects and the applicability on using Soft System Methodology (SSM) for risk analysis after a brief review of SSM. Taking a hydropower project as an example, it constructed the general frame of project risk management planning (PRMP) and established the Risk Management Planning (RMP) system from the perspective of the interests of co-ordination. This paper provided the ideas and methods for construction RMP under the win-win situation through the practice of SSM.
Lauriks, Steve; de Wit, Matty A S; Buster, Marcel C A; Fassaert, Thijs J L; van Wifferen, Ron; Klazinga, Niek S
2014-10-01
The current study set out to develop a decision support tool based on the Self-Sufficiency Matrix (Dutch version; SSM-D) for the clinical decision to allocate homeless people to the public mental health care system at the central access point of public mental health care in Amsterdam, The Netherlands. Logistic regression and receiver operating characteristic-curve analyses were used to model professional decisions and establish four decision categories based on SSM-D scores from half of the research population (Total n = 612). The model and decision categories were found to be accurate and reliable in predicting professional decisions in the second half of the population. Results indicate that the decision support tool based on the SSM-D is useful and feasible. The method to develop the SSM-D as a decision support tool could be applied to decision-making processes in other systems and services where the SSM-D has been implemented, to further increase the utility of the instrument.
ECMWF and SSM/I global surface wind speeds
NASA Technical Reports Server (NTRS)
Halpern, David; Hollingsworth, Anthony; Wentz, Frank
1994-01-01
Monthly mean 2.5 deg x 2.5 deg resolution 10-m height wind speeds from the Special Sensor Microwave/Imager (SSM/I) instrument and the European Centre for Medium-Range Weather Forecasts (ECMWF) forecast-analysis system are compared between 60 deg S and 60 deg N during 1988-91. The SSM/I data were uniformly processed while numerous changes were made to the ECMWF forecast-analysis system. The SSM/I measurements, which were compared with moored-buoy wind observations, were used as a reference dataset to evaluate the influence of the changes made to the ECMWF system upon the ECMWF surface wind speed over the ocean. A demonstrable yearly decrease of the difference between SSM/I and ECMWF wind speeds occurred in the 10 deg S-10 deg N region, including the 5 deg S-5 deg N zone of the Pacific Ocean, where nearly all of the variations occurred in the 160 deg E-160 deg W region. The apparent improvement of the ECMWF wind speed occurred at the same time as the yearly decrease of the equatorial Pacific SSM/I wind speed, which was associated with the natural transition from La Nina to El Nino conditions. In the 10 deg S-10 deg N tropical Atlantic, the ECMWF wind speed had a 4-yr trend, which was not expected nor was it duplicated with the SSM/I data. No yearly trend was found in the difference between SSM/I and ECMWF surface wind speeds in middle latitudes of the Northern and Southern Hemispheres. The magnitude of the differences between SSM/I and ECMWF was 0.4 m/s or 100% larger in the Northern than in the Southern Hemisphere extratropics. In two areas (Arabian Sea and North Atlantic Ocean) where ECMWF and SSM/I wind speeds were compared to ship measurements, the ship data had much better agreement with the ECMWF analyses compared to SSM/I data. In the 10 deg S-10 deg N area the difference between monthly standard deviations of the daily wind speeds dropped significantly from 1988 to 1989 but remained constant at about 30% for the remaining years.
Technicians assembly the Hubble Space Telescope (HST) mockup at JSC
NASA Technical Reports Server (NTRS)
1989-01-01
At JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A, technicians install a high gain antenna (HGA) on the Hubble Space Telescope (HST) mockup. On the ground a technician operates the controls for the overhead crane that is lifting the HGA into place on the Support System Module (SSM) forward shell. Others in a cherry picker basket wait for the HGA to near its final position so they can secure it on the mockup.
Hubble Space Telescope-The Support Systems Module
NASA Technical Reports Server (NTRS)
1980-01-01
This illustration depicts the design features of the Hubble Space Telescope's (HST's) Support Systems Module (SSM). The SSM is one of the three major elements of the HST and encloses the other two elements, the Optical Telescope Assembly (OTA) and the Scientific Instruments (SI's). The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth orbit. By placing the telescope in space, astronomers are able to collect data that is free of the Earth's atmosphere. The HST detects objects 25 times fainter than the dimmest objects seen from Earth and provides astronomers with an observable universe 250 times larger than visible from ground-based telescopes, perhaps as far away as 14 billion light-years. The HST views galaxies, stars, planets, comets, possibly other solar systems, and even unusual phenomena such as quasars, with 10 times the clarity of ground-based telescopes. The spacecraft is 42.5-feet (13-meters) long and weighs 25,000 pounds (11,600 kilograms). Two communication anternas, two solar array panels that collect energy for the HST, and storage bays for electronic gear are on the outside. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Connecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company of Sunnyvale, California produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.
Electricity generation of microbial fuel cell with waterproof breathable membrane cathode
NASA Astrophysics Data System (ADS)
Xing, Defeng; Tang, Yu; Mei, Xiaoxue; Liu, Bingfeng
2015-12-01
Simplification of fabrication and reduction of capital cost are important for scale-up and application of microbial electrochemical systems (MES). A fast and inexpensive method of making cathode was developed via assembling stainless steel mesh (SSM) with waterproof breathable membrane (WBM). Three assemble types of cathodes were fabricated; Pt@SSM/WBM (SSM as cathode skeleton, WBM as diffusion layer, platinum (Pt) catalyst applied on SSM), SSM/Pt@WBM and Pt@WBM. SSM/Pt@WBM cathode showed relatively preferable with long-term stability and favorable power output (24.7 W/m3). Compared to conventional cathode fabrication, air-cathode was made for 0.5 h. The results indicated that the novel fabrication method could remarkably reduce capital cost and simplify fabrication procedures with a comparable power output, making MFC more prospective for future application.
Sacconi, Alessio; Moncelli, Maria Rosa; Margheri, Giancarlo; Tadini-Buoninsegni, Francesco
2013-11-12
A convenient model system for a biological membrane is a solid-supported membrane (SSM), which consists of a gold-supported alkanethiol|phospholipid bilayer. In combination with a concentration jump method, SSMs have been used for the investigation of several membrane transporters. Vesicles incorporating sarcoplasmic reticulum Ca-ATPase (SERCA) were adsorbed on a negatively charged SSM (octadecanethiol|phosphatidylserine bilayer). The current signal generated by the adsorbed vesicles following an ATP concentration jump was compared to that produced by SERCA-containing vesicles adsorbed on a conventional SSM (octadecanethiol|phosphatidylcholine bilayer). A significantly higher current amplitude was recorded on the serine-based SSM. The adsorption of SERCA-incorporating vesicles on the SSM was then characterized by surface plasmon resonance (SPR). The SPR measurements clearly indicate that in the presence of Ca(2+) and Mg(2+), the amount of adsorbed vesicles on the serine-based SSM is about twice that obtained using the conventional SSM, thereby demonstrating that the higher current amplitude recorded on the negatively charged SSM is correlated with a greater quantity of adsorbed vesicles. The enhanced adsorption of membrane vesicles on the PS-based SSM may be useful to study membrane preparations with a low concentration of transport protein generating small current signals, as in the case of various recombinantly expressed proteins.
Exploratory Practice and Soft Systems Methodology
ERIC Educational Resources Information Center
Tajino, Akira; Smith, Craig
2005-01-01
This paper aims to demonstrate that Soft Systems Methodology (SSM), a soft systems approach developed in management studies (see Checkland, 1981), can be usefully linked with Exploratory Practice (EP), a form of practitioner research for language classrooms. Some compatible SSM and EP characteristics, in tandem, could enhance continual efforts to…
STS-31 Hubble Space Telescope (HST) pre-deployment procedures aboard OV-103
1990-04-24
During STS-31, the Hubble Space Telescope (HST) grappled by the remote manipulator system (RMS) end effector is held in appendage deploy position above Discovery, Orbiter Vehicle (OV) 103. The solar array (SA) bistem cassette has been released from its latch fittings. The bistem spreader bars begin to unfurl the SA wing. The secondary deployment mechanism (SDM) handle is visible at the SA end. Stowed against either side of the HST System Support Module (SSM) forward shell are the high-gain antennae (HGA). Puerto Rico and the Dominican Republic are recognizable at the left of the frame.
Automation in the Space Station module power management and distribution Breadboard
NASA Technical Reports Server (NTRS)
Walls, Bryan; Lollar, Louis F.
1990-01-01
The Space Station Module Power Management and Distribution (SSM/PMAD) Breadboard, located at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama, models the power distribution within a Space Station Freedom Habitation or Laboratory module. Originally designed for 20 kHz ac power, the system is now being converted to high voltage dc power with power levels on a par with those expected for a space station module. In addition to the power distribution hardware, the system includes computer control through a hierarchy of processes. The lowest level process consists of fast, simple (from a computing standpoint) switchgear, capable of quickly safing the system. The next level consists of local load center processors called Lowest Level Processors (LLP's). These LLP's execute load scheduling, perform redundant switching, and shed loads which use more than scheduled power. The level above the LLP's contains a Communication and Algorithmic Controller (CAC) which coordinates communications with the highest level. Finally, at this highest level, three cooperating Artificial Intelligence (AI) systems manage load prioritization, load scheduling, load shedding, and fault recovery and management. The system provides an excellent venue for developing and examining advanced automation techniques. The current system and the plans for its future are examined.
SSM - SOLID SURFACE MODELER, VERSION 6.0
NASA Technical Reports Server (NTRS)
Goza, S. P.
1994-01-01
The Solid Surface Modeler (SSM) is an interactive graphics software application for solid-shaded and wireframe three- dimensional geometric modeling. It enables the user to construct models of real-world objects as simple as boxes or as complex as Space Station Freedom. The program has a versatile user interface that, in many cases, allows mouse input for intuitive operation or keyboard input when accuracy is critical. SSM can be used as a stand-alone model generation and display program and offers high-fidelity still image rendering. Models created in SSM can also be loaded into other software for animation or engineering simulation. (See the information below for the availability of SSM with the Object Orientation Manipulator program, OOM, a graphics software application for three-dimensional rendering and animation.) Models are constructed within SSM using functions of the Create Menu to create, combine, and manipulate basic geometric building blocks called primitives. Among the simpler primitives are boxes, spheres, ellipsoids, cylinders, and plates; among the more complex primitives are tubes, skinned-surface models and surfaces of revolution. SSM also provides several methods for duplicating models. Constructive Solid Geometry (CSG) is one of the most powerful model manipulation tools provided by SSM. The CSG operations implemented in SSM are union, subtraction and intersection. SSM allows the user to transform primitives with respect to each axis, transform the camera (the user's viewpoint) about its origin, apply texture maps and bump maps to model surfaces, and define color properties; to select and combine surface-fill attributes, including wireframe, constant, and smooth; and to specify models' points of origin (the positions about which they rotate). SSM uses Euler angle transformations for calculating the results of translation and rotation operations. The user has complete control over the modeling environment from within the system. A variety of file formats are supported to facilitate modification of models and to provide for translation to other formats. This combination of features makes SSM valuable for research and development beyond its intended role in the creation of simulation and animation models. SSM makes an important distinction between models, objects, and surfaces. Models consist of one or more objects and are the highest level geometric entity upon which SSM operates. File operations are performed solely at the model level. (All primitives are models consisting of a single object.) The majority of SSM's manipulation functions operate at the object level. Objects consist of one or more surfaces and surfaces may consist of one or more polygons, which are the structural basis for the modeling method used by SSM. Surfaces are the lowest-level geometric entity upon which SSM operates. Surface-fill attributes, for example, may be assigned at the surface level. Surfaces cannot exist except as part of an object and objects cannot exist except as part of a model. SSM can simultaneously accommodate as many models as the host computer's memory permits. In its default display mode, SSM renders model surfaces using two shading methods: constant shading and smooth shading. Constant shading reveals each polygon of an object's surfaces, giving the object an angular appearance. Smooth shading causes an object's polygons to blend into one another, giving its surfaces a smooth, continuous appearance. When used in proper combination, each of these methods contribute to object realism. SSM applies each method automatically during the creation of primitives, but the user can manually override the default settings. Both fill attributes and shading characteristics can be defined for individual surfaces, objects, and models. SSM provides two optional display modes for reducing rendering time for complex models. In wireframe mode, SSM represents all model geometry data in unshaded line drawings, and no hidden-surface removal is performed. In simple mode, only the outermost boundaries (or bounding volume) that define each model are depicted. In either case the user is allowed to trade off visual authenticity for update speed. SSM is written in C-language for implementation on SGI IRIS 4D series workstations running the IRIX operating system. A minimum of 8Mb of RAM is recommended for this program. The standard distribution medium for SSM is a .25 inch streaming magnetic IRIX tape cartridge in UNIX tar format. SSM is also offered as a bundle with a related program, OOM (Object Orientation Manipulator). Please see the abstract for SSM/OOM (COS-10047) for information about the bundled package. Version 6.0 of SSM was released in 1993.
Shibata, Nobuhito; Nishumura, Asako; Naruhashi, Kazumasa; Nakao, Yurie; Miura, Rieko
2010-05-01
The focus of current study was to demonstrate a new sustained-release capsule including starch-sponge matrix (SSM) and to investigate how the pharmaceutical properties of SSM affect the drug release or its pharmacokinetic properties. Three representative drugs (uranine [UN], indomethacin [IMC] and nifedipine [NFP]) with different physicochemical properties (LogP(ow): 0.10, 1.18 and 3.23, respectively) were selected as model drugs. Model drug was dispersioned in pastelike cornstarch (starch glue) after heating 2.0-3.0% cornstarch suspension with electromagnetic wave at 2450 MHz (700 W) for l min. Then the drug mixture was encapsulated into a gratin capsule by a syringe, and the SSM including drug was prepared by means of a freeze-dried method. Essentially, drug-free SSM has a porous and netlike structure, and the distribution aspect of model drugs in the SSM depends on physicochemical properties between cornstarch glue and drugs. UN with much lower lipophilicity exists in continues phase of SSM, and IMC or NFP with a moderate or a higher lipophilicity exist in continues phase or porous space of the SSM. In the in vitro dissolution study, the release rate of drug from the SSM was mainly dependent on the lipophilicities of drugs, showing a rank order of the release rate of UN>IMC>NFP. In addition, the in vitro release rate for each drug was well regulated by changing the initial concentration of cornstarch suspension. In vivo absorption studies after intraduodenal administration of SSM capsule including model drug revealed that the sustained-release effects also could be regulated by the initial concentration of starch suspension. Moreover, the sustained-release effect of SSM capsule was enhanced with an increase in the lipophilicity of drug, and local-residential and mucoadhesive properties of SSM in the intestine provided stable supply of drugs from the SSM. The SSM capsule we developed here shows promising results as an oral drug delivery system for sustained-release regulation or target specificity. 2009 Elsevier Masson SAS. All rights reserved.
Soft-Systems Methodology. Mendip Papers.
ERIC Educational Resources Information Center
Kowszun, J.
This paper provides an introduction to a particular systems-theoretical approach to problem-solving in the management of education usually referred to as soft-systems methodology (SSM), developed by Peter Checkland in the 1970s. SSM should provide a powerful tool for managers in education at any level who have a strategic role because it can be…
A Role for Soft Systems Methodology in ELT Projects.
ERIC Educational Resources Information Center
Holliday, Adrian
1990-01-01
Discusses the uses for soft systems methodology (SSM) in English language training (ELT) projects. It is suggested that ethnographic techniques may help in achieving the understanding needed to start an ELT project while SSM may provide a useful means for structuring ethnographic findings. (Author/VWL)
"Diversity is at the core of who we are".
Tisdel, Yvonne
2007-01-01
In an effort to become a more fully diverse organization, St. Louis-based SSM Health Care (SSMHC) implemented a plan called "Strategic Goals for Diversity for 1998 to 2004." The plan called for Increasing diversity among SSMHC employees. Improving support to, and alliances with, organizations that pursue fairness and equality for all people. Establishing a work environment that rewards and recognizes excellence and attracts and retains the best people, regardless of factors like race, religion, disability, and gender. Increasing business partnerships with minority and women suppliers. Having established strategic goals, SSM launched a Diversity Forum: a corporate-sponsored gathering designed to develop the careers of people of color, of different ethnic backgrounds, or with disabilities. Diversity Forum participants suggested that mentoring minority employees would help SSM reach its goals. In 2000, the system launched its Diversity Mentoring Program, designed to last four years. The program had two main purposes: To increase the number of people of color, of different ethnicity, or with disabilities in the system's professional and managerial ranks. To prepare these minority professionals and managers for upward mobility by pairing them with executive leaders. Along with the focus on SSM's employees, the system looked outside as well, to its relationships with local communities. The organization worked toward expanding its commitment to purchase from local, small, and minority-owned businesses. In 2005, to help SSM entities meet new goals for 2005-2010 (with a new emphasis on minority patients and customers), the system introduced a new measurement tool, the Diversity Scorecard, which is a comprehensive measuring tool that allows SSM leaders to benchmark their efforts.
SiGN-SSM: open source parallel software for estimating gene networks with state space models.
Tamada, Yoshinori; Yamaguchi, Rui; Imoto, Seiya; Hirose, Osamu; Yoshida, Ryo; Nagasaki, Masao; Miyano, Satoru
2011-04-15
SiGN-SSM is an open-source gene network estimation software able to run in parallel on PCs and massively parallel supercomputers. The software estimates a state space model (SSM), that is a statistical dynamic model suitable for analyzing short time and/or replicated time series gene expression profiles. SiGN-SSM implements a novel parameter constraint effective to stabilize the estimated models. Also, by using a supercomputer, it is able to determine the gene network structure by a statistical permutation test in a practical time. SiGN-SSM is applicable not only to analyzing temporal regulatory dependencies between genes, but also to extracting the differentially regulated genes from time series expression profiles. SiGN-SSM is distributed under GNU Affero General Public Licence (GNU AGPL) version 3 and can be downloaded at http://sign.hgc.jp/signssm/. The pre-compiled binaries for some architectures are available in addition to the source code. The pre-installed binaries are also available on the Human Genome Center supercomputer system. The online manual and the supplementary information of SiGN-SSM is available on our web site. tamada@ims.u-tokyo.ac.jp.
McCarthy, Nora; O'Flynn, Siun; Murphy, John; Barry, David; Canals, Maria Luisa
2013-01-01
The hazardous occupation of seafaring brings many unique medical challenges. Despite its international nature, maritime medicine does not typically form a part of undergraduate medical studies. A unique and innovative, optional student-selected module (SSM) 'maritime medicine' was offered to medical students. A key objective was to develop students' attitudes to maritime medicine and increase their awareness of the discipline and its specialised nature. The aim of this study was to assess qualitatively and quantitatively the educational impact of the maritime medicine SSM and to improve the module content and design for future academic years. Students' perceived relevance and knowledge before and after the module was assessed using a Likert-based questionnaire. Comparison was made with controls in the post module100 multiple choice question (MCQ) paper. Qualitative feedback was obtained from semi-structured focus student discussion groups and the questionnaire's free comments section. A significant increase in perceived knowledge was seen between pre and post module p < 3.45 × 10-10, matched with the module students performing significantly better than controls in the end-of-module MCQ paper (p < 8.99 × 10-20). Qualitative analysis revealed 5 main themes: teaching methods, appreciation of non-academic instructors, appreciation of maritime medicine unique requirements, timetabling and enjoyment. This unique and innovative maritime medicine module harnessed local expertise and raised the awareness and profile of maritime medicine among undergraduate medical students. It was very well received and had a significant educational impact. Practical teaching methods were highly valued by students, with these areas also performing best in quantitative analysis.
SSM/OOM - SSM WITH OOM MANIPULATION CODE
NASA Technical Reports Server (NTRS)
Goza, S. P.
1994-01-01
Creating, animating, and recording solid-shaded and wireframe three-dimensional geometric models can be of great assistance in the research and design phases of product development, in project planning, and in engineering analyses. SSM and OOM are application programs which together allow for interactive construction and manipulation of three-dimensional models of real-world objects as simple as boxes or as complex as Space Station Freedom. The output of SSM, in the form of binary files defining geometric three dimensional models, is used as input to OOM. Animation in OOM is done using 3D models from SSM as well as cameras and light sources. The animated results of OOM can be output to videotape recorders, film recorders, color printers and disk files. SSM and OOM are also available separately as MSC-21914 and MSC-22263, respectively. The Solid Surface Modeler (SSM) is an interactive graphics software application for solid-shaded and wireframe three-dimensional geometric modeling. The program has a versatile user interface that, in many cases, allows mouse input for intuitive operation or keyboard input when accuracy is critical. SSM can be used as a stand-alone model generation and display program and offers high-fidelity still image rendering. Models created in SSM can also be loaded into the Object Orientation Manipulator for animation or engineering simulation. The Object Orientation Manipulator (OOM) is an application program for creating, rendering, and recording three-dimensional computer-generated still and animated images. This is done using geometrically defined 3D models, cameras, and light sources, referred to collectively as animation elements. OOM does not provide the tools necessary to construct 3D models; instead, it imports binary format model files generated by the Solid Surface Modeler (SSM). Model files stored in other formats must be converted to the SSM binary format before they can be used in OOM. SSM is available as MSC-21914 or as part of the SSM/OOM bundle, COS-10047. Among OOM's features are collision detection (with visual and audio feedback), the capability to define and manipulate hierarchical relationships between animation elements, stereographic display, and ray- traced rendering. OOM uses Euler angle transformations for calculating the results of translation and rotation operations. OOM and SSM are written in C-language for implementation on SGI IRIS 4D series workstations running the IRIX operating system. A minimum of 8Mb of RAM is recommended for each program. The standard distribution medium for this program package is a .25 inch streaming magnetic IRIX tape cartridge in UNIX tar format. These versions of OOM and SSM were released in 1993.
NASA Technical Reports Server (NTRS)
Wentz, Frank J.
1992-01-01
This Final Report is a summary of the work that was performed under Contract NAS8-38075 between NASA Marshall Space Flight Center and Remote Sensing Systems from September 1989 to September 1992. The primary accomplishment was the delivery of Special Sensor Microwave/Imager (SSM/I) data tapes containing sensor and geophysical products. In all, 515 tapes (80 gigabytes) were delivered. These tapes contained the F08 SSM/I data for the period from July 1988 through December 1991 and the F10 SSM/I data for the period from December 1990 through December 1991. For the F08 SSM/I, a data inventory was compiled and an engineering assessment was done. Ephemeris tables for the F08 and F10 spacecrafts were computed. Scientific studies on the oceanic wind vector and water vapor field were published, and color atlases of monthly ocean products were produced. This investigation was part of NASA's WETNET program.
Bunch, Martin J
2003-02-01
This paper discusses the integration of soft systems methodology (SSM) within an ecosystem approach in research to support rehabilitation and management of the Cooum River and environs in Chennai, India. The Cooum is an extremely polluted urban stream. Its management is complicated by high rates of population growth, poverty, uncontrolled urban development, jurisdictional conflicts, institutional culture, flat topography, tidal action, blockage of the river mouth, and monsoon flooding. The situation is characterized by basic uncertainty about main processes and activities, and the nature of relationships among actors and elements in the system.SSM is an approach for dealing with messy or ill-structured problematic situations involving human activity. In this work SSM contributed techniques (such as "rich picture" and "CATWOE" tools) to description of the Cooum situation as a socioecological system and informed the approach itself at a theoretical level. Application of three general phases in SSM is discussed in the context of the Cooum River research: (1) problem definition and exploration of the problem situation, (2) development of conceptual models of relevant systems, and (3) the use of these to generate insight and stimulate debate about desirable and feasible change. Its use here gives weight to the statement by others that SSM would be a particularly appropriate methodology to operate the ecosystem approach. As well as informing efforts at management of the Cooum system, this work led the way to explore an adaptive ecosystem approach more broadly to management of the urban environment for human health in Chennai.
NASA Technical Reports Server (NTRS)
Steffen, Konrad; Schweiger, A.; Maslanik, J.; Key, J.; Haefliger, M.; Weaver, R.
1991-01-01
In the past six months, work has continued on energy flux sensitivity studies, ice surface temperature retrievals, corrections to Advanced Very High Resolution Radiometer (AVHRR) thermal infrared data, modelling of cloud fraction retrievals, and radiation climatologies. We tentatively conclude that the SSM/I may not provide accurate enough estimates of ice concentration and type to improve our shorter term energy flux estimates. SSM/I derived parameters may still be applicable in longer term climatological flux characterizations. We hold promise for a system coupling observation to a ice deformation model. Such a model may provide information on ice distribution which can be used in energy flux calculations. Considerable variation was found in modelled energy flux estimates when bulk transfer coefficients are modulated by lead fetch. It is still unclear what the optimum formulation is and this will be the subject of further work. Data sets for ice surface temperature retrievals were assembled and preliminary data analysis was started. Finally, construction of a conceptual framework for further modelling of the Arctic radiation flux climatology was started.
Lam, Sean Shao Wei; Zhang, Ji; Zhang, Zhong Cheng; Oh, Hong Choon; Overton, Jerry; Ng, Yih Yng; Ong, Marcus Eng Hock
2015-02-01
Dynamically reassigning ambulance deployment locations throughout a day to balance ambulance availability and demands can be effective in reducing response times. The objectives of this study were to model dynamic ambulance allocation plans in Singapore based on the system status management (SSM) strategy and to evaluate the dynamic deployment plans using a discrete event simulation (DES) model. The geographical information system-based analysis and mathematical programming were used to develop the dynamic ambulance deployment plans for SSM based on ambulance calls data from January 1, 2011, to June 30, 2011. A DES model that incorporated these plans was used to compare the performance of the dynamic SSM strategy against static reallocation policies under various demands and travel time uncertainties. When the deployment plans based on the SSM strategy were followed strictly, the DES model showed that the geographical information system-based plans resulted in approximately 13-second reduction in the median response times compared to the static reallocation policy, whereas the mathematical programming-based plans resulted in approximately a 44-second reduction. The response times and coverage performances were still better than the static policy when reallocations happened for only 60% of all the recommended moves. Dynamically reassigning ambulance deployment locations based on the SSM strategy can result in superior response times and coverage performance compared to static reallocation policies even when the dynamic plans were not followed strictly. Copyright © 2014 Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Velec, Michael; Waldron, John N.; O'Sullivan, Brian
2010-03-01
Purpose: To prospectively compare setup error in standard thermoplastic masks and skin-sparing masks (SSMs) modified with low neck cutouts for head-and-neck intensity-modulated radiation therapy (IMRT) patients. Methods and Materials: Twenty head-and-neck IMRT patients were randomized to be treated in a standard mask (SM) or SSM. Cone-beam computed tomography (CBCT) scans, acquired daily after both initial setup and any repositioning, were used for initial and residual interfraction evaluation, respectively. Weekly, post-IMRT CBCT scans were acquired for intrafraction setup evaluation. The population random (sigma) and systematic (SIGMA) errors were compared for SMs and SSMs. Skin toxicity was recorded weekly by use ofmore » Radiation Therapy Oncology Group criteria. Results: We evaluated 762 CBCT scans in 11 patients randomized to the SM and 9 to the SSM. Initial interfraction sigma was 1.6 mm or less or 1.1 deg. or less for SM and 2.0 mm or less and 0.8 deg. for SSM. Initial interfraction SIGMA was 1.0 mm or less or 1.4 deg. or less for SM and 1.1 mm or less or 0.9 deg. or less for SSM. These errors were reduced before IMRT with CBCT image guidance with no significant differences in residual interfraction or intrafraction uncertainties between SMs and SSMs. Intrafraction sigma and SIGMA were less than 1 mm and less than 1 deg. for both masks. Less severe skin reactions were observed in the cutout regions of the SSM compared with non-cutout regions. Conclusions: Interfraction and intrafraction setup error is not significantly different for SSMs and conventional masks in head-and-neck radiation therapy. Mask cutouts should be considered for these patients in an effort to reduce skin toxicity.« less
Novel, Biocompatible, Disease Modifying Nanomedicine of VIP for Rheumatoid Arthritis
Sethi, Varun; Rubinstein, Israel; Kuzmis, Antonina; Kastrissios, Helen; Artwohl, James; Onyuksel, Hayat
2013-01-01
Despite advances in rheumatoid arthritis (RA) treatment, efficacious and safe disease-modifying therapy still represents an unmet medical need. Here we describe an innovative strategy to treat RA by targeting low doses of vasoactive intestinal peptide (VIP) self-associated with sterically stabilized micelles (SSMs). This spontaneous interaction of VIP with SSM protects the peptide from degradation or inactivation in biological fluids and prolongs circulation half-life. Treatment with targeted low doses of nano-sized SSM-VIP but not free VIP in buffer significantly reduced incidence and severity of arthritis in an experimental model, completely abrogating joint swelling and destruction of cartilage and bone. In addition, SSM associated VIP unlike free VIP had no side-effects on the systemic functions due to selective targeting to inflamed joints. Finally, low doses of VIP in SSM successfully downregulated both inflammatory and autoimmune components of RA. Collectively, our data clearly indicate that VIP-SSM should be developed to be used as a novel nanomedicine for the treatment of RA. PMID:23211088
NASA Technical Reports Server (NTRS)
Rodgers, Edward B.; Chang, Simon W.; Pierce, Harold F.
1994-01-01
Special Sensor Microwave/Imager (SSM/I) observations were used to examine the spatial and temporal changes of the precipitation characteristics of tropical cyclones. SSM/I observations were also combined with the results of a tropical cyclone numerical model to examine the role of inner-core diabatic heating in subsequent intensity changes of tropical cyclones. Included in the SSM/I observations were rainfall characteristics of 18 named western North Atlantic tropical cyclones between 1987 and 1989. The SSM/I rain-rate algorithm that employed the 85-GHz channel provided an analysis of the rain-rate distribution in greater detail. However, the SSM/I algorithm underestimated the rain rates when compared to in situ techniques but appeared to be comparable to the rain rates obtained from other satellite-borne passive microwave radiometers. The analysis of SSM/I observations found that more intense systems had higher rain rates, more latent heat release, and a greater contribution from heavier rain to the total tropical cyclone rainfall. In addition, regions with the heaviest rain rates were found near the center of the most intense tropical cyclones. Observational analysis from SSM/I also revealed that the greatest rain rates in the inner-core regions were found in the right half of fast-moving cyclones, while the heaviest rain rates in slow-moving tropical cyclones were found in the forward half. The combination of SSM/I observations and an interpretation of numerical model simulations revealed that the correlation between changes in the inner core diabetic heating and the subsequent intensity became greater as the tropical cyclones became more intense.
40 CFR Table 3 to Subpart Cccccc... - Applicability of General Provisions
Code of Federal Regulations, 2011 CFR
2011-07-01
... Malfunction (SSM) Plan Requirement for SSM plan; content of SSM plan; actions during SSM No. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM No. § 63... with opacity/VE standards at all times except during SSM No. § 63.6(h)(2)(i) Determining Compliance...
40 CFR Table 3 to Subpart Cccccc... - Applicability of General Provisions
Code of Federal Regulations, 2012 CFR
2012-07-01
... Malfunction (SSM) Plan Requirement for SSM plan; content of SSM plan; actions during SSM No. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM No. § 63... with opacity/VE standards at all times except during SSM No. § 63.6(h)(2)(i) Determining Compliance...
40 CFR Table 3 to Subpart Cccccc... - Applicability of General Provisions
Code of Federal Regulations, 2014 CFR
2014-07-01
... Malfunction (SSM) Plan Requirement for SSM plan; content of SSM plan; actions during SSM No. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM No. § 63... with opacity/VE standards at all times except during SSM No. § 63.6(h)(2)(i) Determining Compliance...
40 CFR Table 3 to Subpart Cccccc... - Applicability of General Provisions
Code of Federal Regulations, 2013 CFR
2013-07-01
... Malfunction (SSM) Plan Requirement for SSM plan; content of SSM plan; actions during SSM No. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM No. § 63... with opacity/VE standards at all times except during SSM No. § 63.6(h)(2)(i) Determining Compliance...
40 CFR 63.4763 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2012 CFR
2012-07-01
...) and 63.7(e)(1), deviations that occur during a period of SSM of the emission capture system, add-on... identify as an SSM are violations, according to the provisions in § 63.6(e). (i) [Reserved] (j) You must...
40 CFR 63.4763 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2014 CFR
2014-07-01
...) and 63.7(e)(1), deviations that occur during a period of SSM of the emission capture system, add-on... identify as an SSM are violations, according to the provisions in § 63.6(e). (i) [Reserved] (j) You must...
40 CFR 63.4763 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2011 CFR
2011-07-01
...) and 63.7(e)(1), deviations that occur during a period of SSM of the emission capture system, add-on... identify as an SSM are violations, according to the provisions in § 63.6(e). (i) [Reserved] (j) You must...
40 CFR 63.4763 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2013 CFR
2013-07-01
...) and 63.7(e)(1), deviations that occur during a period of SSM of the emission capture system, add-on... identify as an SSM are violations, according to the provisions in § 63.6(e). (i) [Reserved] (j) You must...
40 CFR 63.4763 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2010 CFR
2010-07-01
...) and 63.7(e)(1), deviations that occur during a period of SSM of the emission capture system, add-on... identify as an SSM are violations, according to the provisions in § 63.6(e). (i) [Reserved] (j) You must...
On Transform Domain Communication Systems under Spectrum Sensing Mismatch: A Deterministic Analysis.
Jin, Chuanxue; Hu, Su; Huang, Yixuan; Luo, Qu; Huang, Dan; Li, Yi; Gao, Yuan; Cheng, Shaochi
2017-07-08
Towards the era of mobile Internet and the Internet of Things (IoT), numerous sensors and devices are being introduced and interconnected. To support such an amount of data traffic, traditional wireless communication technologies are facing challenges both in terms of the increasing shortage of spectrum resources and massive multiple access. The transform-domain communication system (TDCS) is considered as an alternative multiple access system, where 5G and mobile IoT are mainly focused. However, previous studies about TDCS are under the assumption that the transceiver has the global spectrum information, without the consideration of spectrum sensing mismatch (SSM). In this paper, we present the deterministic analysis of TDCS systems under arbitrary given spectrum sensing scenarios, especially the influence of the SSM pattern to the signal to noise ratio (SNR) performance. Simulation results show that arbitrary SSM pattern can lead to inferior bit error rate (BER) performance.
On Transform Domain Communication Systems under Spectrum Sensing Mismatch: A Deterministic Analysis
Jin, Chuanxue; Hu, Su; Huang, Yixuan; Luo, Qu; Huang, Dan; Li, Yi; Cheng, Shaochi
2017-01-01
Towards the era of mobile Internet and the Internet of Things (IoT), numerous sensors and devices are being introduced and interconnected. To support such an amount of data traffic, traditional wireless communication technologies are facing challenges both in terms of the increasing shortage of spectrum resources and massive multiple access. The transform-domain communication system (TDCS) is considered as an alternative multiple access system, where 5G and mobile IoT are mainly focused. However, previous studies about TDCS are under the assumption that the transceiver has the global spectrum information, without the consideration of spectrum sensing mismatch (SSM). In this paper, we present the deterministic analysis of TDCS systems under arbitrary given spectrum sensing scenarios, especially the influence of the SSM pattern to the signal to noise ratio (SNR) performance. Simulation results show that arbitrary SSM pattern can lead to inferior bit error rate (BER) performance. PMID:28698477
Wydro, Paweł; Flasiński, Michał; Broniatowski, Marcin
2013-05-01
In this work, the Langmuir monolayers were used as a model for the analysis of the influence of cholesterol on 1,2-distearoyl-sn-glycero-3-phosphocholine - DSPC and stearoyl sphingomyelin - SSM, as well as their equimolar mixture. The aim of these studies was to compare the affinity of cholesterol to sphingomyelin and phosphatidylcholine and discuss the effectiveness of cholesterol packing with these phospholipids. The experiments involved the registration of the surface pressure-area isotherms combined with the application of Brewster angle microscopy (BAM) images and grazing incidence X-ray diffraction methods. We have performed a thorough analysis of the properties of both one-component DSPC and SSM films as well as their 1:1 mixture. Next, the effect of cholesterol on these systems was verified based on the results for 2:1 SSM/Chol, 2:1 DSPC/Chol, and 1:1:1 DSPC/SSM/Chol mixtures. It was found that both phospholipids form highly condensed monolayers, however, they differ in the orientation of acyl chains, namely the acyl chains are more tilted in DSPC film as compared to SSM monolayer as well as DSPC/SSM mixture. Furthermore, the area contraction provoked by the addition of cholesterol was found to be more pronounced for DSPC monolayer than in DSPC/SSM and SSM films. However, all the collected results allow one to postulate that the ability of cholesterol to form ordered domains with DSPC and SSM is similar and is predominantly driven by hydrophobic forces between molecules. The differences in the area condensation induced by cholesterol on the studied phospholipids films results from differences in molecular organization of pure phospholipids films rather than specific cholesterol-phospholipid interactions. Copyright © 2013 Elsevier Inc. All rights reserved.
Hectors, Stefanie J; Besa, Cecilia; Wagner, Mathilde; Jajamovich, Guido H; Haines, George K; Lewis, Sara; Tewari, Ashutosh; Rastinehad, Ardeshir; Huang, Wei; Taouli, Bachir
2017-09-01
To quantify Tofts model (TM) and shutter-speed model (SSM) perfusion parameters in prostate cancer (PCa) and noncancerous peripheral zone (PZ) and to compare the diagnostic performance of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) to Prostate Imaging and Reporting and Data System (PI-RADS) classification for the assessment of PCa aggressiveness. Fifty PCa patients (mean age 60 years old) who underwent MRI at 3.0T followed by prostatectomy were included in this Institutional Review Board-approved retrospective study. DCE-MRI parameters (K trans , v e , k ep [TM&SSM] and intracellular water molecule lifetime τ i [SSM]) were determined in PCa and PZ. Differences in DCE-MRI parameters between PCa and PZ, and between models were assessed using Wilcoxon signed-rank tests. Receiver operating characteristic (ROC) analysis for differentiation between PCa and PZ was performed for individual and combined DCE-MRI parameters. Diagnostic performance of DCE-MRI parameters for identification of aggressive PCa (Gleason ≥8, grade group [GG] ≥3 or pathology stage pT3) was assessed using ROC analysis and compared with PI-RADSv2 scores. DCE-MRI parameters were significantly different between TM and SSM and between PZ and PCa (P < 0.037). Diagnostic performances of TM and SSM for differentiation of PCa from PZ were similar (highest AUC TM: K trans +k ep 0.76, SSM: τ i +k ep 0.80). PI-RADS outperformed TM and SSM DCE-MRI for identification of Gleason ≥8 lesions (AUC PI-RADS: 0.91, highest AUC DCE-MRI: K trans +τ i SSM 0.61, P = 0.002). The diagnostic performance of PI-RADS and DCE-MRI for identification of GG ≥3 and pT3 PCa was not significantly different (P > 0.213). SSM DCE-MRI did not increase the diagnostic performance of DCE-MRI for PCa characterization. PI-RADS outperformed both TM and SSM DCE-MRI for identification of aggressive cancer. 3 Technical Efficacy: Stage 2 J. MAGN. RESON. IMAGING 2017;46:837-849. © 2017 International Society for Magnetic Resonance in Medicine.
NASA Technical Reports Server (NTRS)
Claud, Chantal; Katsaros, Kristina B.; Petty, Grant W.; Chedin, Alain; Scott, Noelle A.
1992-01-01
Until recently, the scarcity of meteorological observations over polar areas has limited studies of high-latitude weather systems, but now data from polar orbiting satellites offer a new opportunity to observe and describe these systems. TOVS data have been used successfully for delineating synoptic and subsynoptic systems, since they provide the vertical temperature structure of the atmosphere; SSM/I observations have proved valuable for analyzing storms through water vapor and rain determinations. These positive results prompted simultaneous analysis of TOVS and SSM/I observations obtained during a cold air outbreak over the Norwegian Sea. After a description of the instruments and the retrieval schemes, the mutually supporting information from these two independent instruments is discussed. Implications for the monitoring of polar lows are presented.
NASA Technical Reports Server (NTRS)
Claud, Chantal; Katsaros, Kristina B.; Petty, Grant W.; Chedin, Alain; Scott, Noelle A.
1992-01-01
Until recently, the scarcity of meteorological observations over polar areas has limited studies of high latitude weather systems, but now data from polar orbiting satellites offer a new opportunity to observe and describe these systems. TOVS data were used successfully for delineating synoptic and subsynoptic systems since they provide the vertical temperature structure of the atmosphere: SSM/I observations have proved valuable for analyzing storms through water vapor and rain determinations. These positive results prompted us to analyze simultaneous TOVS and SSM/I observations obtained during a cold air outbreak over the Norwegian Sea. After a description of the instruments and the retrieval schemes, the mutually supporting information from these two independent instruments is discussed. Implications for the monitoring of polar lows are presented.
2014-11-01
the editor, Mr. John Everett , and Ms. Barbara Varvaglione for production support. Copyright Notice © 2014 Institute for Defense Analyses 4850 Mark...Institute for Defense Analyses, forthcoming. Thomason, James S., Robert J. Atwell, D. Sean Barnett, James P. Bell , Michael F. Fitzsimmons, Nicholas S
40 CFR Table 3 to Subpart Bbbbbb... - Applicability of General Provisions
Code of Federal Regulations, 2013 CFR
2013-07-01
... possible No. § 63.6(e)(2) [Reserved] § 63.6(e)(3) Startup, Shutdown, and Malfunction (SSM) plan Requirement for SSM plan; content of SSM plan; actions during SSM No. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM No. § 63.6(f)(2)-(3) Methods...
The contaminant analysis automation robot implementation for the automated laboratory
DOE Office of Scientific and Technical Information (OSTI.GOV)
Younkin, J.R.; Igou, R.E.; Urenda, T.D.
1995-12-31
The Contaminant Analysis Automation (CAA) project defines the automated laboratory as a series of standard laboratory modules (SLM) serviced by a robotic standard support module (SSM). These SLMs are designed to allow plug-and-play integration into automated systems that perform standard analysis methods (SAM). While the SLMs are autonomous in the execution of their particular chemical processing task, the SAM concept relies on a high-level task sequence controller (TSC) to coordinate the robotic delivery of materials requisite for SLM operations, initiate an SLM operation with the chemical method dependent operating parameters, and coordinate the robotic removal of materials from the SLMmore » when its commands and events has been established to allow ready them for transport operations as well as performing the Supervisor and Subsystems (GENISAS) software governs events from the SLMs and robot. The Intelligent System Operating Environment (ISOE) enables the inter-process communications used by GENISAS. CAA selected the Hewlett-Packard Optimized Robot for Chemical Analysis (ORCA) and its associated Windows based Methods Development Software (MDS) as the robot SSM. The MDS software is used to teach the robot each SLM position and required material port motions. To allow the TSC to command these SLM motions, a hardware and software implementation was required that allowed message passing between different operating systems. This implementation involved the use of a Virtual Memory Extended (VME) rack with a Force CPU-30 computer running VxWorks; a real-time multitasking operating system, and a Radiuses PC compatible VME computer running MDS. A GENISAS server on The Force computer accepts a transport command from the TSC, a GENISAS supervisor, over Ethernet and notifies software on the RadiSys PC of the pending command through VMEbus shared memory. The command is then delivered to the MDS robot control software using a Windows Dynamic Data Exchange conversation.« less
Deriving earth science products from SSM/I
NASA Technical Reports Server (NTRS)
Wentz, Frank J.
1995-01-01
A few of the major accomplishments during the second phase include: (1) all three Special Sensor Microwave Imagers (SSM/I's: F08, F10, and F11) have been cross-calibrated; (2) a very large, quality-controlled, collocated SSM/I and radiosonde data set has been produced; (3) the SSM/I-radiosonde and SSM/I-buoy data sets have been used to calibrate the SSM/I ocean retrieval algorithm; (4) ocean products have been produced for both F10 and F11 SSM/I for 1991-1993; (5) the SSM/I-buoy data set was used to better determine the variation of the ocean T(sub B) with wind direction; and (6) it was demonstrated that under high wind conditions, wind direction information can be obtained from individual SSM/I observations.
Bruce, Kimberley; Lawler, Clara; Cardin, Rhonda D.
2016-01-01
Cytomegaloviruses (CMVs) establish chronic, systemic infections. Peripheral infection spreads via lymph nodes, which are also a focus of host defence. Thus, this is a point at which systemic infection spread might be restricted. Subcapsular sinus macrophages (SSM) captured murine CMV (MCMV) from the afferent lymph and poorly supported its replication. Blocking the type I interferon (IFN-I) receptor (IFNAR) increased MCMV infection of SSM and of the fibroblastic reticular cells (FRC) lining the subcapsular sinus, and accelerated viral spread to the spleen. Little splenic virus derived from SSM, arguing that they mainly induce an anti-viral state in the otherwise susceptible FRC. NK cells also limited infection, killing infected FRC and causing tissue damage. They acted independently of IFN-I, as IFNAR blockade increased NK cell recruitment, and NK cell depletion increased infection in IFNAR-blocked mice. Thus SSM restricted MCMV infection primarily though IFN-I, with NK cells providing a second line of defence. The capacity of innate immunity to restrict MCMV escape from the subcapsular sinus suggested that enhancing its recruitment might improve infection control. PMID:27926941
Kovacs, E M; Westerterp-Plantenga, M S; Saris, W H; Goossens, I; Geurten, P; Brouns, F
2001-03-01
To investigate the effect of addition of modified guar gum (GG) to a low-energy semisolid meal on appetite and body weight (BW) loss. Twenty eight mainly overweight male volunteers (age, 19-56 y; body mass index, 29+/-2 kg x m(-2); BW, 89.4+/-9.2 kg). Baseline of one week with self-selected diet. Three treatments of 2 weeks with a low-energy diet divided over three times a day, consisting of a semisolid meal with (SSM+) or without GG (SSM) or a solid meal (SM) with the same energy content (947 kJ) and macronutrient composition, and a dinner of the subject's own choice. Washout periods lasted 4 weeks. Compared to baseline values, reduction in energy intake and BW loss were similar for SSM+, SSM and SM. Appetite (hunger, desire to eat or estimation of how much one could eat) was increased in SSM and in SM compared to baseline, but not in SSM+. Satiety and fullness in SSM+, SSM and SM were similar to baseline. Any intervention was more effective on BW loss when it took place the first time compared to the second and third times (2.6+/-0.2 kg, 1.7+/-0.2 kg and 1.1+/-0.2 kg, respectively; P<0.001). The SM-SSM+-SSM sequence was more effective on BW loss compared to the SSM+-SSM-SM sequence (5.6+/-1.0 and 2.5+/-0.6 kg, respectively; P<0.05). All the three treatments were equally effective with respect to BW loss. GG addition to a semisolid meal prevented an increase in appetite, hunger and desire to eat, which increase was present in the other treatments. However, differences between treatments were not statistically significant. The order effect shows that repeated 2-week bouts of dieting become increasingly ineffective. The sequence SM-SSM+-SSM was more effective than the sequence SSM+-SSM-SM, probably because compliance was relatively higher with the SSM+ or SSM diet, and compliance decreased towards the end of the complete experiment.
Introducing soft systems methodology plus (SSM+): why we need it and what it can contribute.
Braithwaite, Jeffrey; Hindle, Don; Iedema, Rick; Westbrook, Johanna I
2002-01-01
There are many complicated and seemingly intractable problems in the health care sector. Past ways to address them have involved political responses, economic restructuring, biomedical and scientific studies, and managerialist or business-oriented tools. Few methods have enabled us to develop a systematic response to problems. Our version of soft systems methodology, SSM+, seems to improve problem solving processes by providing an iterative, staged framework that emphasises collaborative learning and systems redesign involving both technical and cultural fixes.
40 CFR Table 12 to Subpart Eeee of... - Applicability of General Provisions to Subpart EEEE
Code of Federal Regulations, 2011 CFR
2011-07-01
... met Yes. § 63.6(e)(2) [Reserved]. § 63.6(e)(3) SSM Plan Requirement for SSM plan; content of SSM plan; actions during SSM Yes; however, (1) the 2-day reporting requirement in paragraph § 63.6(e)(3)(iv) does...) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63...
40 CFR Table 12 to Subpart Eeee of... - Applicability of General Provisions to Subpart EEEE
Code of Federal Regulations, 2012 CFR
2012-07-01
... met Yes. § 63.6(e)(2) [Reserved]. § 63.6(e)(3) SSM Plan Requirement for SSM plan; content of SSM plan; actions during SSM Yes; however, (1) the 2-day reporting requirement in paragraph § 63.6(e)(3)(iv) does...) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63...
40 CFR Table 12 to Subpart Eeee of... - Applicability of General Provisions to Subpart EEEE
Code of Federal Regulations, 2014 CFR
2014-07-01
... met Yes. § 63.6(e)(2) [Reserved]. § 63.6(e)(3) SSM Plan Requirement for SSM plan; content of SSM plan; actions during SSM Yes; however, (1) the 2-day reporting requirement in paragraph § 63.6(e)(3)(iv) does...) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63...
40 CFR Table 12 to Subpart Eeee of... - Applicability of General Provisions to Subpart EEEE
Code of Federal Regulations, 2013 CFR
2013-07-01
... met Yes. § 63.6(e)(2) [Reserved]. § 63.6(e)(3) SSM Plan Requirement for SSM plan; content of SSM plan; actions during SSM Yes; however, (1) the 2-day reporting requirement in paragraph § 63.6(e)(3)(iv) does...) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63...
Amft, Martin; Leisvik, Mathias; Carroll, Simon
2017-03-16
Half of the original 13 Swedish nuclear power reactors will be shut down by 2020. The decommissioning of these reactors is a challenge for all parties involved, including the licensees, the waste management system, the financing system, and the Swedish Radiation Safety Authority (SSM). This paper presents an overview of the Swedish regulations for decommissioning of nuclear facilities. It describes some of the experiences that SSM has gained from the application of these regulations. The focus of the present paper is on administrative aspects of decommissioning, such as SSM's guidelines, the definition of fundamental concepts in the regulatory framework, and a proposed revision of the licensing process according to the Environmental Act. These improvements will help to streamline the administration of the commercial nuclear power plant decommissioning projects that are anticipated to commence in Sweden in the near future. Copyright © 2017 Elsevier Ltd. All rights reserved.
Automated computation of autonomous spectral submanifolds for nonlinear modal analysis
NASA Astrophysics Data System (ADS)
Ponsioen, Sten; Pedergnana, Tiemo; Haller, George
2018-04-01
We discuss an automated computational methodology for computing two-dimensional spectral submanifolds (SSMs) in autonomous nonlinear mechanical systems of arbitrary degrees of freedom. In our algorithm, SSMs, the smoothest nonlinear continuations of modal subspaces of the linearized system, are constructed up to arbitrary orders of accuracy, using the parameterization method. An advantage of this approach is that the construction of the SSMs does not break down when the SSM folds over its underlying spectral subspace. A further advantage is an automated a posteriori error estimation feature that enables a systematic increase in the orders of the SSM computation until the required accuracy is reached. We find that the present algorithm provides a major speed-up, relative to numerical continuation methods, in the computation of backbone curves, especially in higher-dimensional problems. We illustrate the accuracy and speed of the automated SSM algorithm on lower- and higher-dimensional mechanical systems.
NASA Technical Reports Server (NTRS)
Prigent, Catherine; Wigneron, Jean-Pierre; Rossow, William B.; Pardo-Carrion, Juan R.
1999-01-01
To retrieve temperature and humidity profiles from SSM/T and AMSU, it is important to quantify the contribution of the Earth surface emission. So far, no global estimates of the land surface emissivities are available at SSM/T and AMSU frequencies and scanning conditions. The land surface emissivities have been previously calculated for the globe from the SSM/I conical scanner between 19 and 85 GHz. To analyze the feasibility of deriving SSM/T and AMSU land surface emissivities from SSM/I emissivities, the spectral and angular variations of the emissivities are studied, with the help of ground-based measurements, models and satellite estimates. Up to 100 GHz, for snow and ice free areas, the SSM/T and AMSU emissivities can be derived with useful accuracy from the SSM/I emissivities- The emissivities can be linearly interpolated in frequency. Based on ground-based emissivity measurements of various surface types, a simple model is proposed to estimate SSM/T and AMSU emissivities for all zenith angles knowing only the emissivities for the vertical and horizontal polarizations at 53 deg zenith angle. The method is tested on the SSM/T-2 91.655 GHz channels. The mean difference between the SSM/T-2 and SSM/I-derived emissivities is less than or equal to 0.01 for all zenith angles with an r.m.s. difference of approx. = 0.02. Above 100 GHz, preliminary results are presented at 150 GHz, based on SSM/T-2 observations and are compared with the very few estimations available in the literature.
A Prototype MODI- SSM/I Snow Mapping Algorithm
NASA Technical Reports Server (NTRS)
Tait, Andrew B.; Barton, Jonathan S.; Hall, Dorothy K.
1999-01-01
Data in the wavelength range 0.545 - 1.652 microns from the Moderate Resolution Imaging Spectroradiometer (MODIS), to be launched aboard the Earth Observing System (EOS) Terra in the fall of 1999, will be used to map daily global snow cover at 500m resolution. However, during darkness, or when the satellite's view of the surface is obscured by cloud, snow cover cannot be mapped using MODIS data. We show that during these conditions, it is possible to supplement the MODIS product by mapping the snow cover using passive microwave data from the Special Sensor Microwave Imager (SSM/I), albeit with much poorer resolution. For a 7-day time period in March 1999, a prototype MODIS snow-cover product was compared with a prototype MODIS-SSM/I product for the same area in the mid-western United States. The combined MODIS-SSM/I product mapped 9% more snow cover than the MODIS-only product.
40 CFR Table 8 to Subpart Jjjjjj... - Applicability of General Provisions to Subpart JJJJJJ
Code of Federal Regulations, 2013 CFR
2013-07-01
... malfunctions ASAP No. § 63.6(e)(3) SSM Plan No. § 63.6(f)(1) SSM exemption No. § 63.6(h)(1) SSM exemption No... operation No. § 63.8(c)(1)(iii) Requirement to develop SSM Plan for CMS No. § 63.8(d)(3) Written procedures for CMS Yes, except for the last sentence, which refers to an SSM plan. SSM plans are not required...
40 CFR Table 8 to Subpart Jjjjjj... - Applicability of General Provisions to Subpart JJJJJJ
Code of Federal Regulations, 2012 CFR
2012-07-01
... malfunctions ASAP No. § 63.6(e)(3) SSM Plan No. § 63.6(f)(1) SSM exemption No. § 63.6(h)(1) SSM exemption No... operation No. § 63.8(c)(1)(iii) Requirement to develop SSM Plan for CMS No. § 63.8(d)(3) Written procedures for CMS Yes, except for the last sentence, which refers to an SSM plan. SSM plans are not required...
40 CFR Table 8 to Subpart Jjjjjj... - Applicability of General Provisions to Subpart JJJJJJ
Code of Federal Regulations, 2014 CFR
2014-07-01
... malfunctions ASAP No. § 63.6(e)(3) SSM Plan No. § 63.6(f)(1) SSM exemption No. § 63.6(h)(1) SSM exemption No... operation No. § 63.8(c)(1)(iii) Requirement to develop SSM Plan for CMS No. § 63.8(d)(3) Written procedures for CMS Yes, except for the last sentence, which refers to an SSM plan. SSM plans are not required...
40 CFR Table 8 to Subpart Jjjjjj... - Applicability of General Provisions to Subpart JJJJJJ
Code of Federal Regulations, 2011 CFR
2011-07-01
... malfunctions ASAP No. § 63.6(e)(3) SSM Plan No. § 63.6(f)(1) SSM exemption No. § 63.6(h)(1) SSM exemption No... operation No. § 63.8(c)(1)(iii) Requirement to develop SSM Plan for CMS No. § 63.8(d)(3) Written procedures for CMS Yes, except for the last sentence, which refers to an SSM plan. SSM plans are not required...
ERIC Educational Resources Information Center
Dempsey, Owen P.; Lucas, Beverley J.
2006-01-01
This article explores a qualitative evaluation of student and tutor perceptions of the educational aims, methods and impact of undertaking a new medical humanities student selected module (SSM) within one medical school in the United Kingdom. The findings of the study build on previous work within this subject area and provide insight of learning…
2014-11-01
Dr. David R. Graham for his insightful review and comments. We also want to thank the editor, Mr. John Everett , and Ms. Barbara Varvaglione for...Robert J. Atwell, D. Sean Barnett, James P. Bell , Michael F. Fitzsimmons, Nicholas S. J. Karvonides, Julie C. Kelly, et al. “Strategic and Critical
Frisch, Morten; Nielsen, Nete Munk; Pedersen, Bo Vestergaard
2014-01-01
Autoimmune diseases have been little studied in gay men and lesbians. We followed 4.4 million Danes, including 9,615 same-sex married (SSM) persons, for 47 autoimmune diseases in the National Patient Registry between 1989 and 2008. Poisson regression analyses provided first hospitalization rate ratios (RRs) comparing rates between SSM individuals and persons in other marital status categories. SSM individuals experienced no unusual overall risk of autoimmune diseases. However, the risk of autoimmune thyroid dysfunction was increased, notably Hashimoto's thyroiditis (women(SSM), RR = 2.92; 95% confidence interval (CI) 1.74-4.55) and Graves' disease (men(SSM), RR = 1.88; 95% CI 1.08-3.01). There was also an excess of primary biliary cirrhosis (women(SSM), RR = 4.09; 95% CI 1.01-10.7), and of psoriasis (men(SSM), RR = 2.48; 95% CI 1.77-3.36), rheumatic fever (men(SSM), RR = 7.55; 95% CI 1.87-19.8), myasthenia gravis (men(SSM), RR = 5.51; 95% CI 1.36-14.4), localized scleroderma (men(SSM), RR = 7.16; 95% CI 1.18-22.6) and pemphigoid (men(SSM), RR = 6.56; 95% CI 1.08-20.6), while Dupuytren's contracture was reduced (men(SSM), RR = 0.64; 95% CI 0.39-0.99). The excess of psoriasis was restricted to same-sex married men with HIV/AIDS (men(SSM), RR = 10.5; 95% CI 6.44-15.9), whereas Graves' disease occurred in excess only among same-sex married men without HIV/AIDS (men(SSM), RR = 1.99; 95% CI 1.12-3.22). Lesbians and immunologically competent gay men in same-sex marriage face no unusual overall risk of autoimmune diseases. However, the observed increased risk of thyroid dysfunction in these lesbians and gay men deserves further study.
NASA Technical Reports Server (NTRS)
Zipser, Edward J.; Mcguirk, James P.
1993-01-01
The research objectives were the following: (1) to use SSM/I to categorize, measure, and parameterize effects of rainfall systems around the globe, especially mesoscale convective systems; (2) to use SSM/I to monitor key components of the global hydrologic cycle, including tropical rainfall and precipitable water, and links to increasing sea surface temperatures; and (3) to assist in the development of efficient methods of exchange of massive satellite data bases and of analysis techniques, especially their use at a university. Numerous tasks have been initiated. First and foremost has been the integration and startup of the WetNet computer system into the TAMU computer network. Scientific activity was infeasible before completion of this activity. Final hardware delivery was not completed until October 1991, after which followed a period of identification and solution of several hardware and software and software problems. Accomplishments representing approximately four months work with the WetNEt system are presented.
Type I Interferons and NK Cells Restrict Gammaherpesvirus Lymph Node Infection.
Lawler, Clara; Tan, Cindy S E; Simas, J Pedro; Stevenson, Philip G
2016-10-15
Gammaherpesviruses establish persistent, systemic infections and cause cancers. Murid herpesvirus 4 (MuHV-4) provides a unique window into the early events of host colonization. It spreads via lymph nodes. While dendritic cells (DC) pass MuHV-4 to lymph node B cells, subcapsular sinus macrophages (SSM), which capture virions from the afferent lymph, restrict its spread. Understanding how this restriction works offers potential clues to a more comprehensive defense. Type I interferon (IFN-I) blocked SSM lytic infection and reduced lytic cycle-independent viral reporter gene expression. Plasmacytoid DC were not required, but neither were SSM the only source of IFN-I, as IFN-I blockade increased infection in both intact and SSM-depleted mice. NK cells restricted lytic SSM infection independently of IFN-I, and SSM-derived virions spread to the spleen only when both IFN-I responses and NK cells were lacking. Thus, multiple innate defenses allowed SSM to adsorb virions from the afferent lymph with relative impunity. Enhancing IFN-I and NK cell recruitment could potentially also restrict DC infection and thus improve infection control. Human gammaherpesviruses cause cancers by infecting B cells. However, vaccines designed to block virus binding to B cells have not stopped infection. Using a related gammaherpesvirus of mice, we have shown that B cells are infected not via cell-free virus but via infected myeloid cells. This suggests a different strategy to stop B cell infection: stop virus production by myeloid cells. Not all myeloid infection is productive. We show that subcapsular sinus macrophages, which do not pass infection to B cells, restrict gammaherpesvirus production by recruiting type I interferons and natural killer cells. Therefore, a vaccine that speeds the recruitment of these defenses might stop B cell infection. Copyright © 2016, American Society for Microbiology. All Rights Reserved.
Type I Interferons and NK Cells Restrict Gammaherpesvirus Lymph Node Infection
Lawler, Clara; Tan, Cindy S. E.; Simas, J. Pedro
2016-01-01
ABSTRACT Gammaherpesviruses establish persistent, systemic infections and cause cancers. Murid herpesvirus 4 (MuHV-4) provides a unique window into the early events of host colonization. It spreads via lymph nodes. While dendritic cells (DC) pass MuHV-4 to lymph node B cells, subcapsular sinus macrophages (SSM), which capture virions from the afferent lymph, restrict its spread. Understanding how this restriction works offers potential clues to a more comprehensive defense. Type I interferon (IFN-I) blocked SSM lytic infection and reduced lytic cycle-independent viral reporter gene expression. Plasmacytoid DC were not required, but neither were SSM the only source of IFN-I, as IFN-I blockade increased infection in both intact and SSM-depleted mice. NK cells restricted lytic SSM infection independently of IFN-I, and SSM-derived virions spread to the spleen only when both IFN-I responses and NK cells were lacking. Thus, multiple innate defenses allowed SSM to adsorb virions from the afferent lymph with relative impunity. Enhancing IFN-I and NK cell recruitment could potentially also restrict DC infection and thus improve infection control. IMPORTANCE Human gammaherpesviruses cause cancers by infecting B cells. However, vaccines designed to block virus binding to B cells have not stopped infection. Using a related gammaherpesvirus of mice, we have shown that B cells are infected not via cell-free virus but via infected myeloid cells. This suggests a different strategy to stop B cell infection: stop virus production by myeloid cells. Not all myeloid infection is productive. We show that subcapsular sinus macrophages, which do not pass infection to B cells, restrict gammaherpesvirus production by recruiting type I interferons and natural killer cells. Therefore, a vaccine that speeds the recruitment of these defenses might stop B cell infection. PMID:27466430
An interchangeable scanning Hall probe/scanning SQUID microscope
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tang, Chiu-Chun; Lin, Hui-Ting; Wu, Sing-Lin
2014-08-15
We have constructed a scanning probe microscope for magnetic imaging, which can function as a scanning Hall probe microscope (SHPM) and as a scanning SQUID microscope (SSM). The scanning scheme, applicable to SHPM and SSM, consists of a mechanical positioning (sub) micron-XY stage and a flexible direct contact to the sample without a feedback control system for the Z-axis. With the interchangeable capability of operating two distinct scanning modes, our microscope can incorporate the advantageous functionalities of the SHPM and SSM with large scan range up to millimeter, high spatial resolution (⩽4 μm), and high field sensitivity in a widemore » range of temperature (4.2 K-300 K) and magnetic field (10{sup −7} T-1 T). To demonstrate the capabilities of the system, we present magnetic images scanned with SHPM and SSM, including a RbFeB magnet and a nickel grid pattern at room temperature, surface magnetic domain structures of a La{sub 2/3}Ca{sub 1/3}MnO{sub 3} thin film at 77 K, and superconducting vortices in a striped niobium film at 4.2 K.« less
40 CFR Table 10 to Subpart Uuuu of... - Applicability of General Provisions to Subpart UUUU
Code of Federal Regulations, 2013 CFR
2013-07-01
... SSM plan; content of SSM plan Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2) and (3) Methods for Determining... conducted under representative conditions; cannot conduct performance tests during SSM; not a violation to...
40 CFR Table 10 to Subpart Uuuu of... - Applicability of General Provisions to Subpart UUUU
Code of Federal Regulations, 2011 CFR
2011-07-01
... SSM plan; content of SSM plan Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2) and (3) Methods for Determining... conducted under representative conditions; cannot conduct performance tests during SSM; not a violation to...
40 CFR Table 10 to Subpart Uuuu of... - Applicability of General Provisions to Subpart UUUU
Code of Federal Regulations, 2012 CFR
2012-07-01
... SSM plan; content of SSM plan Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2) and (3) Methods for Determining... conducted under representative conditions; cannot conduct performance tests during SSM; not a violation to...
40 CFR Table 10 to Subpart Uuuu of... - Applicability of General Provisions to Subpart UUUU
Code of Federal Regulations, 2014 CFR
2014-07-01
... SSM plan; content of SSM plan Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2) and (3) Methods for Determining... conducted under representative conditions; cannot conduct performance tests during SSM; not a violation to...
Miller, Cynthia L; Coopey, Suzanne B; Rafferty, Elizabeth; Gadd, Michele; Smith, Barbara L; Specht, Michelle C
2016-02-01
Standard specimen mammography (SSM) is performed in the radiology department after wire-localized excision of non-palpable breast lesions to confirm the presence of the target and evaluate margins. Alternatively, intra-operative specimen mammography (ISM) allows surgeons to view images in the operating room (OR). We conducted a randomized study comparing ISM and SSM. Women undergoing wire-localized excision for breast malignancy or imaging abnormality were randomized to SSM or ISM. For SSM, the specimen was transported to the radiology department for imaging and interpretation. For ISM, the specimen was imaged in the OR for interpretation by the surgeon and sent for SSM. Interpretation time was from specimen leaving OR until radiologist interpretation for SSM and from placement in ISM device until surgeon interpretation for ISM. Procedure and interpretation times were compared. Concordance between ISM and SSM for target and margins was evaluated. 72 patients were randomized, 36 ISM and 36 SSM. Median procedure times were similar, 48.5 (17-138) min for ISM, and 54 (17-40) min for SSM (p = 0.72), likely since specimens in both groups traveled to radiology for SSM. Median interpretation time was significantly shorter with ISM, 1 (0.5-2.0) and 9 (4-16) min for ISM and SSM, respectively (p < 0.0001). Among specimens with ISM and SSM, concordance was 100 % (35/35) for target and 93 % (14/15) for margins. In this randomized trial, use of ISM compared with SSM significantly reduced interpretation times, while accurately identifying the target. This could result in decreased operative costs from shorter OR times with use of ISM.
40 CFR Table 10 to Subpart Dddd of... - Applicability of General Provisions to Subpart DDDD
Code of Federal Regulations, 2013 CFR
2013-07-01
... for SSM and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance...; cannot conduct performance tests during SSM; not a violation to exceed standard during SSM Yes. § 63.7(e...
40 CFR Table 10 to Subpart Dddd of... - Applicability of General Provisions to Subpart DDDD
Code of Federal Regulations, 2011 CFR
2011-07-01
... for SSM and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance...; cannot conduct performance tests during SSM; not a violation to exceed standard during SSM Yes. § 63.7(e...
40 CFR Table 10 to Subpart Dddd of... - Applicability of General Provisions to Subpart DDDD
Code of Federal Regulations, 2012 CFR
2012-07-01
... for SSM and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance...; cannot conduct performance tests during SSM; not a violation to exceed standard during SSM Yes. § 63.7(e...
40 CFR Table 10 to Subpart Dddd of... - Applicability of General Provisions to Subpart DDDD
Code of Federal Regulations, 2014 CFR
2014-07-01
... for SSM and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance...; cannot conduct performance tests during SSM; not a violation to exceed standard during SSM Yes. § 63.7(e...
Sex differences in the regulation of spatially distinct cardiac mitochondrial subpopulations.
Ribeiro, Rogério Faustino; Ronconi, Karoline Sousa; Morra, Elis Aguiar; Do Val Lima, Patrícia Ribeiro; Porto, Marcella Leite; Vassallo, Dalton Valentim; Figueiredo, Suely Gomes; Stefanon, Ivanita
2016-08-01
Spatially distinct mitochondrial subpopulation may mediate myocardial pathology through permeability transition pore opening (MPTP). The goal of this study was to assess sex differences on the two spatially distinct mitochondrial subpopulations: subsarcolemmal mitochondria (SSM) and intermyofibrillar mitochondria (IFM) based on morphology, membrane potential, mitochondrial function, oxidative phosphorylation, and MPTP. Aged matched Wistar rats were used to study SSM and IFM. Mitochondrial size was larger in SSM than in IFM in both genders. However, SSM internal complexity, yield, and membrane potential were higher in male than in female. The maximal rate of mitochondrial respiration, states 3 and 4, using glutamate + malate as substrate, were higher in IFM and SSM in the male group compared to female. The respiratory control ratio (RCR-state3/state 4), was not different in both SSM and IFM with glutamate + malate. The ADP:O ratio was found higher in IFM and SSM from female compared to males. When pyruvate was used, state 3 was found unchanged in both IFM and SSM, state 4 was also greater in male IFM compared to female. The RCR increased in the SSM while IFM remained the same. State 4 was higher in male SSM while in the IFM remained the same. The IFM presented a higher Ca(2+) retention capacity compared with SSM, however, there was a greater sensitivity to Ca(2+)-induced MPTP in SSM and IFM in the male group compared to female. In conclusion, our data show that spatially distinct mitochondrial subpopulations have sex-based differences in oxidative phosphorylation, morphology, and calcium retention capacity.
History of Hubble Space Telescope (HST)
1980-10-01
This illustration depicts the design features of the Hubble Space Telescope's (HST's) Support Systems Module (SSM). The SSM is one of the three major elements of the HST and encloses the other two elements, the Optical Telescope Assembly (OTA) and the Scientific Instruments (SI's). The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth orbit. By placing the telescope in space, astronomers are able to collect data that is free of the Earth's atmosphere. The HST detects objects 25 times fainter than the dimmest objects seen from Earth and provides astronomers with an observable universe 250 times larger than visible from ground-based telescopes, perhaps as far away as 14 billion light-years. The HST views galaxies, stars, planets, comets, possibly other solar systems, and even unusual phenomena such as quasars, with 10 times the clarity of ground-based telescopes. The spacecraft is 42.5-feet (13-meters) long and weighs 25,000 pounds (11,600 kilograms). Two communication anternas, two solar array panels that collect energy for the HST, and storage bays for electronic gear are on the outside. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Connecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company of Sunnyvale, California produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.
Currier, Joseph M; McDermott, Ryon C; Sims, Brook M
2018-02-15
Examine differences in mental health treatment-related stigma in student service members and veterans (SSM/Vs) and peers from 57 post-secondary institutions across the United States. In total, 909 SSM/Vs and 1818 demographically- and institutionally-matched non-SSM/Vs completed assessments of stigma-related barriers to mental health service utilization as part of the Healthy Minds Study between 2011 and 2015. When compared to non-SSM/V peers, SSM/Vs reported more mental health treatment-related stigma toward help-seekers and less confidence in the helpfulness of therapy/counseling and psychotropic medications. However, effect sizes were small in magnitude (ds = .10 to .16), and depressed students in both groups reported greater stigma. SSM/Vs experience greater treatment-related stigma than non-SSM/V peers, which may deter service use in many cases. However, differences in stigma were small and other under-studied barriers to help-seeking may apply to the substantive subset of SSM/Vs and non-SSM/Vs who may benefit from utilizing available services.
Zijenah, Lynn Sodai; Kadzirange, Gerard; Bandason, Tsitsi; Chipiti, Maria Mary; Gwambiwa, Bevel; Makoga, Forget; Chungu, Pauline; Kaguru, Philip; Dheda, Keertan
2016-01-22
In Zimbabwe, sputum smear microscopy (SSM) is the routinely used TB diagnostic tool in hospitalised HIV-infected patients. However, SSM has poor sensitivity in HIV-infected patients. We compared performance of urine lipoarabinomannan strip test (LAM) and SSM among hospitalized HIV-infected patients with suspected TB. Hospitalized HIV-infected patients with suspected TB were randomized to LAM plus SSM or SSM alone groups as part of a larger multi-country parent study. Here we present a comparison of LAM versus SSM performance from the Zimbabwe study site. LAM analyses (grade 2 cut-off) were conducted using (i) a microbiological reference standard (MRS; culture positivity for M.tb and designated definite TB) and (ii) a composite reference standard (CRS; definite TB plus probable TB i.e. patients with clinical TB excluded from the culture negative group). CRS constituted the primary analysis. 82/457 (18%) of the patients randomized to the LAM group were M.tuberculosis culture positive. Using CRS, sensitivity (%, 95% CI) of LAM was significantly higher than SSM [49.2 (42.1-56.4) versus 29.4(23.2-36.3); p < 0.001]. Specificity and PPV were 98.1%, and 95.8%, respectively. By contrast, using MRS, LAM sensitivity was similar to SSM and specificity was significantly lower, however, the combined sensitivity of LAM and SSM was significantly higher than that of SSM alone, p = 0.009. Using CRS, LAM sensitivity (%, CI) was CD4 count dependent [60.6(50.7-69.8) at ≤50 cells/μL; 40.0(22.7-59.4) at 51-100 cells/μL, and 32.8(21.0-46.3) at >100 cells/μL. The combined sensitivity of LAM and SSM was higher than SSM alone being highest at CD4 counts <50 cells/μL [67.6(57.9-76.3); p = <0.001]. Specificity of LAM or SSM alone, or of combined LAM and SSM was >97% in all the 3 CD4 strata. Among hospitalized HIV-infected patients with suspected TB, the sensitivity of LAM is significantly higher than that of SSM, especially at low CD4 counts. LAM and SSM are complimentary tests for diagnosis of TB in HIV-infected patients. We recommend a combination of LAM and SSM for TB diagnosis in HIV-infected patients with low CD4 counts in HIV/TB co-endemic countries, where alternative methods are unavailable.
SU-G-TeP1-08: LINAC Head Geometry Modeling for Cyber Knife System
DOE Office of Scientific and Technical Information (OSTI.GOV)
Liang, B; Li, Y; Liu, B
Purpose: Knowledge of the LINAC head information is critical for model based dose calculation algorithms. However, the geometries are difficult to measure precisely. The purpose of this study is to develop linac head models for Cyber Knife system (CKS). Methods: For CKS, the commissioning data were measured in water at 800mm SAD. The measured full width at half maximum (FWHM) for each cone was found greater than the nominal value, this was further confirmed by additional film measurement in air. Diameter correction, cone shift and source shift models (DCM, CSM and SSM) are proposed to account for the differences. Inmore » DCM, a cone-specific correction is applied. For CSM and SSM, a single shift is applied to the cone or source physical position. All three models were validated with an in-house developed pencil beam dose calculation algorithm, and further evaluated by the collimator scatter factor (Sc) correction. Results: The mean square error (MSE) between nominal diameter and the FWHM derived from commissioning data and in-air measurement are 0.54mm and 0.44mm, with the discrepancy increasing with cone size. Optimal shift for CSM and SSM is found to be 9mm upward and 18mm downward, respectively. The MSE in FWHM is reduced to 0.04mm and 0.14mm for DCM and CSM (SSM). Both DCM and CSM result in the same set of Sc values. Combining all cones at SAD 600–1000mm, the average deviation from 1 in Sc of DCM (CSM) and SSM is 2.6% and 2.2%, and reduced to 0.9% and 0.7% for the cones with diameter greater than 15mm. Conclusion: We developed three geometrical models for CKS. All models can handle the discrepancy between vendor specifications and commissioning data. And SSM has the best performance for Sc correction. The study also validated that a point source can be used in CKS dose calculation algorithms.« less
Study of X-ray transients with Scanning Sky Monitor (SSM) onboard AstroSat
NASA Astrophysics Data System (ADS)
Ramadevi, M. C.; Ravishankar, B. T.; Sarwade, Abhilash R.; Vaishali, S.; Iyer, Nirmal Kumar; Nandi, Anuj; Girish, V.; Agarwal, Vivek Kumar; Baby, Blessy Elizabeth; Hasan, Mohammed; Seetha, S.; Bhattacharya, Dipankar
2018-02-01
Scanning Sky Monitor (SSM) onboard AstroSat is an X-ray sky monitor in the energy range 2.5-10 keV. SSM scans the sky for X-ray transient sources in this energy range of interest. If an X-ray transient source is detected in outburst by SSM, the information will be provided to the astronomical community for follow-up observations to do a detailed study of the source in various other bands. SSM instrument, since its power-ON in orbit, has observed a number of X-ray sources. This paper discusses observations of few X-ray transients by SSM. The flux reported by SSM for few sources during its Performance Verification phase (PV phase) is studied and the results are discussed.
NASA Astrophysics Data System (ADS)
Milewski, A. M.; Markondiah Jayaprakash, S.; Sultan, M.; Becker, R.
2006-12-01
Given the advances in new technologies, more and more scientists are beginning to utilize remote sensing or satellite imagery in their research applications. Remote sensing data offer a synoptic view and observational quantitative parameters over large domains and thus provide cost-effective solutions by reducing the labor involved in collecting extensive field observations. One of the valuable data sets that can be extracted from remote sensing observations is precipitation. Prior to the deployment of the relevant satellite-based sensors, users had to resort to rainfall stations to obtain precipitation data. Currently, users can freely download digital Tropical Rainfall Measuring Mission (TRMM) and Special Spectral Measuring Imager (SSM/I) precipitation data, however, the process of data extraction is not user friendly as it requires computer programming to fully utilize these datasets. We have developed the Automated Precipitation Processing Module (APPM) to simplify the tedious manual process needed to retrieve rainfall estimates via satellite measurements. The function of the APPM is to process the TRMM and SSM/I data according to the user's spatial and temporal inputs. Using APPM, we processed all available TRMM and SSM/I data for six continents (processed data is available on six compact discs: one/continent: refer to www.esrs.wmich.edu). The input data includes global SSM/I (1987-1998) and TRMM (1998-2005) covering an area extending from 50 degrees North to 50 degrees South. Advantages of using our software include: (1) user friendly technology, (2) reduction in processing time (e.g., processing of the entire TRMM & SSM/I dataset (1987-2005) for Africa was reduced from one year to one week), and (3) reduction in required computer resources (original TRMM & SSM/I data: 1.5 terabytes; processed: 300 megabytes). The APPM reads raw binary data and allows for: (1) sub-setting global dataset given user-defined boundaries (latitude and longitude), (2) selection of temporal range of interest, (3) Definition of minimum threshold precipitation value, (4) plotting of rainfall events versus time and recording events that exceed a specified threshold value, and (5) merge outputs of SSM/I and TRMM data into one continuous record. The maximum allowable temporal range is from 1987 to 2005, which is the time frame during which precipitation sensors were deployed. Most hydrologic investigations require dense networks of hydrologic monitoring systems that are expensive which makes this situation difficult in many parts of the world. Through the use of the APPM and the Soil Water and Assessment Tool (SWAT) model the ground water recharge and surface water runoff was computed for the past 18 years in several arid areas of the world (Egypt, Sinai, and Israel). Results include 13 watersheds in Egypt, 10 watersheds in Sinai, and 2 watersheds in Israel. The selected watersheds provide ample calibration data (rain gauges, stream flow) on a continuous basis for the duration of the model (1987- 2005). The average precipitation amounts (35mm/yr) in these areas are controlled by extreme rainfall events (~15) where precipitation exceeds 20mm/day. Implications for utilizing temporal global remote sensing data for calculating continuous rainfall/runoff models on global and regional scales for the past two decades are now within reach.
Atmospheric effects on SMMR and SSM/I 37 GHz polarization difference over the Sahel
NASA Technical Reports Server (NTRS)
Choudhury, B. J.; Major, E. R.; Smith, E. A.; Becker, F.
1992-01-01
The atmospheric effects on the difference of vertically and horizontally polarized brightness temperatures, Delta(T) observed at 37 GHz frequency of the SMMR on board the Nimbus-7 satellite and SSM/I on board the DMSP-F8 satellite are studied over two 2.5 by 2.5 deg regions within the Sahel and Sudan zones of Africa from January 1985 to December 1986 through radiative transfer analysis using surface temperature, atmospheric water vapor, and cloud optical thickness. It is found that atmospheric effects alone cannot explain the observed temporal variation of Delta(T), although the atmosphere introduces important modulations on the observed seasonal variations of Delta(T) due to rather significant seasonal variation of precipitable water vapor. These Delta(T) data should be corrected for atmospheric effects before any quantitative analysis of land surface change over the Sahel and Sudan zones.
Li, Jing-Sheng; Tsai, Tsung-Yuan; Wang, Shaobai; Li, Pingyue; Kwon, Young-Min; Freiberg, Andrew; Rubash, Harry E.; Li, Guoan
2014-01-01
Using computed tomography (CT) or magnetic resonance (MR) images to construct 3D knee models has been widely used in biomedical engineering research. Statistical shape modeling (SSM) method is an alternative way to provide a fast, cost-efficient, and subject-specific knee modeling technique. This study was aimed to evaluate the feasibility of using a combined dual-fluoroscopic imaging system (DFIS) and SSM method to investigate in vivo knee kinematics. Three subjects were studied during a treadmill walking. The data were compared with the kinematics obtained using a CT-based modeling technique. Geometric root-mean-square (RMS) errors between the knee models constructed using the SSM and CT-based modeling techniques were 1.16 mm and 1.40 mm for the femur and tibia, respectively. For the kinematics of the knee during the treadmill gait, the SSM model can predict the knee kinematics with RMS errors within 3.3 deg for rotation and within 2.4 mm for translation throughout the stance phase of the gait cycle compared with those obtained using the CT-based knee models. The data indicated that the combined DFIS and SSM technique could be used for quick evaluation of knee joint kinematics. PMID:25320846
Effects of self-selected music on strength, explosiveness, and mood.
Biagini, Matthew S; Brown, Lee E; Coburn, Jared W; Judelson, Daniel A; Statler, Traci A; Bottaro, Martim; Tran, Tai T; Longo, Nick A
2012-07-01
There has been much investigation into the use of music as an ergogenic aid to facilitate physical performance. However, previous studies have primarily focused on predetermined music and aerobic exercise. The purpose of this study was to investigate the effects of self-selected music (SSM) vs. those of no music (NM) on the mood and performance of the athletes performing bench press and squat jump. Twenty resistance trained collegiate men completed 2 experimental conditions, one while listening to SSM and the other with NM. The subjects reported their profile of mood states (POMS) and rating of perceived exertion (RPE) before and after performing 3 sets to failure of the bench press at 75% 1 repetition maximum (1RM) and 3 reps of the squat jump at 30% 1RM. Statistical analyses revealed no differences in squat jump height or relative ground reaction force, but the takeoff velocity (SSM-2.06 ± 0.17 m·s(-1); NM-1.99 ± 0.18 m·s(-1)), rate of velocity development (SSM-5.92 ± 1.46 m·s(-2); NM-5.63 ± 1.70 m·s(-2)), and rate of force development (SSM-3175.61 ± 1792.37 N·s(-1); NM-2519.12 ± 1470.32 N·s(-1)) were greater with SSM, whereas RPE (SSM-5.71 ± 1.37; NM-6.36 ± 1.61) was greater with NM. Bench press reps to failure and RPE were not different between conditions. The POMS scores of vigor (SSM-20.15 ± 5.58; NM-17.45 ± 5.84), tension (SSM-8.40 ± 3.99; NM-6.07 ± 3.26), and fatigue (SSM-8.65 ± 4.49; NM-7.40 ± 4.38) were greater with SSM. This study demonstrated increased performance during an explosive exercise and an altered mood state when listening to SSM. Therefore, listening to SSM might be beneficial for acute power performance.
1km Soil Moisture from Downsampled Sentinel-1 SAR Data: Harnessing Assets and Overcoming Obstacles.
NASA Astrophysics Data System (ADS)
Bauer-Marschallinger, Bernhard; Cao, Senmao; Schaufler, Stefan; Paulik, Christoph; Naeimi, Vahid; Wagner, Wolfgang
2017-04-01
Radars onboard Earth observing satellites allow estimating Surface Soil Moisture (SSM) regularly and globally. The use of coarse-scale measurements from active or passive radars for SSM retrieval is well established and in operational use. Thanks to the Sentinel-1 mission, launched in 2014 and deploying Synthetic Aperture Radars (SAR), high-resolution radar imagery is routinely available at the scale of 20 meters, with a high revisit frequency of 3-6 days and with unprecedented radiometric accuracy. However, the direct exploitation of high-resolution SAR data for SSM retrieval is complicated by several problems: Small-scaled contributions to the radar backscatter from individual ground features often obscure the soil moisture signal, rendering common algorithms insensitive to SSM. Furthermore, the influence of vegetation dynamics on the radar signal is less understood than in the coarse-scale case, leading to biases during the vegetation period. Finally, the large data volumes of high-resolution remote sensing data present a great load on hardware systems. Consequently, a spatial resampling of the high-resolution SAR data to a 500 meters sampling is done, allowing the exploitation of information at 10 meter sampling, but reducing effectively the inherent uncertainties. The thereof retrieved 1km SSM product aims to describe the soil moisture dynamics at medium scale with high quality. We adopted the TU-Wien Change Detection algorithm to the Sentinel-1 data, which was already successfully used for retrieving SSM from ERS-1/2 and Envisat-ASAR observations. The adoption entails a new method for SAR image resampling, including a masking for pixels that do not carry soil moisture signals, preventing them to spread during downsampling. Furthermore, the observation angle between the radar sensors and the ground is treated in a different way, as Sentinel-1 sensors observe from fixed orbit paths (in contrast to other radar sensors). Here, a regression model is developed that successfully estimates the dependency of radar backscatter to observation angle with statistical parameters from the Sentinel-1 SAR time series archive. We present the Sentinel-1 1km-SSM product generated by the adopted change detection algorithm. The dataset covers the European continent and holds data from October 2014 ongoing. In addition to a validation of the SSM product, the statistical SAR parameters used during SSM retrieval are examined.
40 CFR Table 17 to Subpart Xxxx of... - Applicability of General Provisions to This Subpart XXXX
Code of Federal Regulations, 2012 CFR
2012-07-01
... Malfunction Plan (SSMP) Yes No. § 63.6(f)(1) Compliance Except During SSM Yes No. § 63.6(f)(2)-(3) Methods for... conditions; cannot conduct performance tests during SSM; not a violation to exceed standard during SSM Yes No...) No. § 63.8(c)(1)(i) Routine and Predictable SSM No No. § 63.8(c)(1)(ii) SSM not in SSMP No No. § 63.8...
40 CFR Table 17 to Subpart Xxxx of... - Applicability of General Provisions to This Subpart XXXX
Code of Federal Regulations, 2014 CFR
2014-07-01
... Malfunction Plan (SSMP) Yes No. § 63.6(f)(1) Compliance Except During SSM Yes No. § 63.6(f)(2)-(3) Methods for... conditions; cannot conduct performance tests during SSM; not a violation to exceed standard during SSM Yes No...) No. § 63.8(c)(1)(i) Routine and Predictable SSM No No. § 63.8(c)(1)(ii) SSM not in SSMP No No. § 63.8...
40 CFR Table 17 to Subpart Xxxx of... - Applicability of General Provisions to This Subpart XXXX
Code of Federal Regulations, 2013 CFR
2013-07-01
... Malfunction Plan (SSMP) Yes No. § 63.6(f)(1) Compliance Except During SSM Yes No. § 63.6(f)(2)-(3) Methods for... conditions; cannot conduct performance tests during SSM; not a violation to exceed standard during SSM Yes No...) No. § 63.8(c)(1)(i) Routine and Predictable SSM No No. § 63.8(c)(1)(ii) SSM not in SSMP No No. § 63.8...
Student Service Members/Veterans on Campus: Challenges for Reintegration
Borsari, Brian; Yurasek, Ali; Miller, Mary Beth; Murphy, James G.; McDevitt-Murphy, Meghan E.; Martens, Matthew P.; Darcy, Monica G.; Carey, Kate B.
2016-01-01
Many returning OIF/OEF/OND Veterans are seeking higher education in an effort to develop a meaningful career and financial stability. Evidence suggests that student service members/Veterans (SSM/Vs) are experiencing less academic success than other students. The purpose of this review is to identify the unique challenges of SSM/Vs and evaluate current campus efforts to facilitate their retention and academic performance. With a focus on SSM/Vs attending colleges and universities, we obtained 57 peer-reviewed and 73 grey literature records published between 2001 and 2015. The current SSM/V literature contains an abundance of grey literature, and the empirical research tends to be limited by cross-sectional design and small sample sizes. SSM/Vs encounter significant personal and environmental challenges when transitioning from the military to college campuses. A variety of services have been developed to address the needs of the SSM/V population, but the efficacy of these services remains largely unknown. In conclusion, there is a clear need to provide education to faculty, students and staff regarding the experiences of SSM/Vs. Efforts to enhance screening for, availability of, and SSM/V engagement in mental health services would also be beneficial, as would improved availability of and SSM/V access to academic support. All future programs designed to address the unique challenges of SSM/Vs in the academic environment should also be systematically implemented and evaluated. PMID:28206804
Automating a spacecraft electrical power system using expert systems
NASA Technical Reports Server (NTRS)
Lollar, L. F.
1991-01-01
Since Skylab, Marshall Space Flight Center (MSFC) has recognized the need for large electrical power systems (EPS's) in upcoming Spacecraft. The operation of the spacecraft depends on the EPS. Therefore, it must be efficient, safe, and reliable. In 1978, as a consequence of having to supply a large number of EPS personnel to monitor and control Skylab, the Electrical power Branch of MSFC began the autonomously managed power system (AMPS) project. This project resulted in the assembly of a 25-kW high-voltage dc test facility and provided the means of getting man out of the loop as much as possible. AMPS includes several embedded controllers which allow a significant level of autonomous operation. More recently, the Electrical Division at MSFC has developed the space station module power management and distribution (SSM/PMAD) breadboard to investigate managing and distributing power in the Space Station Freedom habitation and laboratory modules. Again, the requirement for a high level of autonomy for the efficient operation over the lifetime of the station and for the benefits of enhanced safety has been demonstrated. This paper describes the two breadboards and the hierarchical approach to automation which was developed through these projects.
Analysing magnetism using scanning SQUID microscopy.
Reith, P; Renshaw Wang, X; Hilgenkamp, H
2017-12-01
Scanning superconducting quantum interference device microscopy (SSM) is a scanning probe technique that images local magnetic flux, which allows for mapping of magnetic fields with high field and spatial accuracy. Many studies involving SSM have been published in the last few decades, using SSM to make qualitative statements about magnetism. However, quantitative analysis using SSM has received less attention. In this work, we discuss several aspects of interpreting SSM images and methods to improve quantitative analysis. First, we analyse the spatial resolution and how it depends on several factors. Second, we discuss the analysis of SSM scans and the information obtained from the SSM data. Using simulations, we show how signals evolve as a function of changing scan height, SQUID loop size, magnetization strength, and orientation. We also investigated 2-dimensional autocorrelation analysis to extract information about the size, shape, and symmetry of magnetic features. Finally, we provide an outlook on possible future applications and improvements.
Analysing magnetism using scanning SQUID microscopy
NASA Astrophysics Data System (ADS)
Reith, P.; Renshaw Wang, X.; Hilgenkamp, H.
2017-12-01
Scanning superconducting quantum interference device microscopy (SSM) is a scanning probe technique that images local magnetic flux, which allows for mapping of magnetic fields with high field and spatial accuracy. Many studies involving SSM have been published in the last few decades, using SSM to make qualitative statements about magnetism. However, quantitative analysis using SSM has received less attention. In this work, we discuss several aspects of interpreting SSM images and methods to improve quantitative analysis. First, we analyse the spatial resolution and how it depends on several factors. Second, we discuss the analysis of SSM scans and the information obtained from the SSM data. Using simulations, we show how signals evolve as a function of changing scan height, SQUID loop size, magnetization strength, and orientation. We also investigated 2-dimensional autocorrelation analysis to extract information about the size, shape, and symmetry of magnetic features. Finally, we provide an outlook on possible future applications and improvements.
Lim, Woosung; Ko, Beom-Seok; Kim, Hee-Jung; Lee, Jong Won; Eom, Jin Sup; Son, Byung Ho; Lee, Taik Jong; Ahn, Sei-Hyun
2010-07-01
Skin sparing mastectomy (SSM) has been demonstrated as an oncologically safe procedure for early breast cancer in several studies. But few studies concerned the safety of SSM for patients with locally advanced breast cancer; therefore, its safety for these patients is less clear. The purpose of this study is to examine the oncological safety of SSM followed by immediate reconstruction for locally advanced breast cancer. We retrospectively analyzed 897 breast cancer patients who underwent mastectomy for stage IIB (T3N0)-III between 1996 and 2005. Of 897, 87 underwent SSM (n = 73) or nipple sparing mastectomy (NSM, n = 14). We compared the local recurrence (LR) rate, disease-free survival (DFS) and overall survival (OS) for SSM group with conventional mastectomy group. The 5-year DFS and OS of SSM group were not worse than those of CM group for all stages. LR rate was 3.0% (2/67) for IIB, 2.8% (1/36) for IIIA, 4.5% (1/22) for IIIC, and 5.0% (1/20) for T3 in SSM group. There was no difference in LR rates between SSM group and CM group for all stages. Our study demonstrates that SSM followed by immediate reconstruction is oncologically safe for locally advanced breast cancer. (c) 2010 Wiley-Liss, Inc.
Polymyxin B self-associated with phospholipid nanomicelles.
Brandenburg, Kenneth S; Rubinstein, Israel; Sadikot, Ruxana T; Önyüksel, Hayat
2012-01-01
Although Polymyxin B (PXB) is an effective antibiotic for Gram-negative bacterial infections, clinical use is hampered by toxicity and protein binding, which may be overcome by delivering PXB using a safe nanocarrier. To determine whether PXB self-associates with long-circulating biocompatible/biodegradable PEGylated phospholipid nanomicelles (SSM) and change the PXB in vitro bioactivity. PXB and SSM (15 nm) composed of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N [methoxy(polyethylene glycol)-2000] (DSPE-PEG(2000)) were prepared in 10 mM HEPES-buffered saline. Interactions between PXB and SSM were determined by dynamic light scattering and fluorescence spectroscopy. Anti-infective effects of PXB-SSM were tested against Pseudomonas aeruginosa strain PA01 in vitro. Approximately four PXB molecules self-associated with each SSM. However, significant decrease in P. aeruginosa killing was observed with PXB-SSM relative to PXB alone (P < 0.05). Empty SSM had no significant effect on bacterial growth. PXB's self-association with SSM resulted in mitigation of the in vitro antibacterial activity. This phenomenon could be attributed, in part, to PEG(2000) hindering electrostatic interactions between cationic PXB and anionic bacterial cell wall. PXB association with SSM formed a stable nanomedicine, resulting in decreased bioactivity of the drug in vitro. Effectiveness of this nanomedicine in vivo is yet to be studied.
Low Cost and Energy Efficient Methods for the Manufacture of Semi-Solid (SSM) Feedstock
DOE Office of Scientific and Technical Information (OSTI.GOV)
Diran Apelian; Qingyue Pan; Makhlouf Makhlouf
2005-11-07
The SSM Consortium (now ACRC) at WPI has been carrying out fundamental, pre-competitive research in SSM for several years. Current and past research (at WPI) has generated many results of fundamental and applied nature, which are available to the SSM community. These include materials characterization, yield stress effects, alloy development, rheological properties, process modeling/simulation, semi-solid slurry formation, etc. Alternative method to produce SSM slurries at lower processing costs and with reduced energy consumption is a critical need. The production of low cost SSM feedstock will certainly lead to a dramatic increase in the tonnage of castings produced by SSM, andmore » will provide end users such as the transportation industry, with lighter, cheaper and high performance materials. In this program, the research team has addressed three critical issues in semi-solid processing. They are: (1) Development of low cost, reliable slurry-on-demand approaches for semi-solid processing; (2) Application of the novel permanent grain refining technology-SiBloy for the manufacture of high-quality SSM feedstock, and (3) Development of computational and modeling tools for semi-solid processing to enhance SSM process control. Salient results from these studies are summarized and detailed in our final technical report.« less
Skin-sparing mastectomy: a survey based approach to defining standard of care.
Shen, Jeannie; Ellenhorn, Joshua; Qian, Dajun; Kulber, David; Aronowitz, Joel
2008-10-01
Skin-sparing mastectomy (SSM) followed by immediate reconstruction has been advocated as an effective treatment option for patients with early-stage breast carcinoma. It markedly improves the quality of breast reconstruction through preservation of the natural skin envelope and a smaller incision. The purpose of this study was to investigate general surgeons' attitudes towards SSM. A postal questionnaire survey of California general surgeons was conducted regarding SSM. Of 370 respondents who stated they performed breast cancer surgery, 331 perform mastectomy for cancer with planned immediate reconstruction. Ninety per cent of respondents did not feel that SSM resulted in higher rates of local recurrence. In addition, 70 per cent felt that the cosmetic results of immediate breast reconstruction after SSM were better than those after a standard mastectomy. Despite this, only 61 per cent perform SSM in most cases when immediate breast reconstruction is planned. The majority of general surgeons perform SSM and therefore it should be considered standard of care. Despite a growing body of literature demonstrating high rates of patient satisfaction and long-term oncologic safety with SSM, there remains significant variation in practice patterns among general surgeons. Additional effort in general surgery education regarding the feasibility and safety of SSM is needed.
Student service members/veterans on campus: Challenges for reintegration.
Borsari, Brian; Yurasek, Ali; Miller, Mary Beth; Murphy, James G; McDevitt-Murphy, Meghan E; Martens, Matthew P; Darcy, Monica G; Carey, Kate B
2017-01-01
Many returning OIF/OEF/OND Veterans are seeking higher education in an effort to develop a meaningful career and financial stability. Evidence suggests that student service members/veterans (SSM/Vs) are experiencing less academic success than other students. The purpose of this review is to identify the unique challenges of SSM/Vs and evaluate current campus efforts to facilitate their retention and academic performance. With a focus on SSM/Vs attending colleges and universities, we obtained 57 peer-reviewed and 73 gray literature records published between 2001 and 2015. The current SSM/V literature contains an abundance of gray literature, and the empirical research tends to be limited by cross-sectional design and small sample sizes. SSM/Vs encounter significant personal and environmental challenges when transitioning from the military to college campuses. A variety of services have been developed to address the needs of the SSM/V population, but the efficacy of these services remains largely unknown. In conclusion, there is a clear need to provide education to faculty, students, and staff regarding the experiences of SSM/Vs. Efforts to enhance screening for, availability of, and SSM/V engagement in mental health services would also be beneficial, as would improved availability of and SSM/V access to academic support. All future programs designed to address the unique challenges of SSM/Vs in the academic environment should also be systematically implemented and evaluated. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Sun, Junhui; Nguyen, Tiffany; Aponte, Angel M.; Menazza, Sara; Kohr, Mark J.; Roth, David M.; Patel, Hemal H.; Murphy, Elizabeth; Steenbergen, Charles
2015-01-01
Nitric oxide (NO) and protein S-nitrosylation (SNO) have been shown to play important roles in ischaemic preconditioning (IPC)-induced acute cardioprotection. The majority of proteins that show increased SNO following IPC are localized to the mitochondria, and our recent studies suggest that caveolae transduce acute NO/SNO cardioprotective signalling in IPC hearts. Due to the close association between subsarcolemmal mitochondria (SSM) and the sarcolemma/caveolae, we tested the hypothesis that SSM, rather than the interfibrillar mitochondria (IFM), are major targets for NO/SNO signalling derived from caveolae-associated eNOS. Following either control perfusion or IPC, SSM and IFM were isolated from Langendorff perfused mouse hearts, and SNO was analysed using a modified biotin switch method with fluorescent maleimide fluors. In perfusion control hearts, the SNO content was higher in SSM compared with IFM (1.33 ± 0.19, ratio of SNO content Perf-SSM vs. Perf-IFM), and following IPC SNO content significantly increased preferentially in SSM, but not in IFM (1.72 ± 0.17 and 1.07 ± 0.04, ratio of SNO content IPC-SSM vs. Perf-IFM, and IPC-IFM vs. Perf-IFM, respectively). Consistent with these findings, eNOS, caveolin-3, and connexin-43 were detected in SSM, but not in IFM, and IPC resulted in a further significant increase in eNOS/caveolin-3 levels in SSM. Interestingly, we did not observe an IPC-induced increase in SNO or eNOS/caveolin-3 in SSM isolated from caveolin-3−/− mouse hearts, which could not be protected with IPC. In conclusion, these results suggest that SSM may be the preferential target of sarcolemmal signalling-derived post-translational protein modification (caveolae-derived eNOS/NO/SNO), thus providing an important role in IPC-induced cardioprotection. PMID:25694588
DOE Office of Scientific and Technical Information (OSTI.GOV)
Prabhu, Roshan; Godette, Karen; Winship Cancer Institute, Emory University, Atlanta, GA
2012-03-15
Purpose: The safety and efficacy of skin-sparing mastectomy (SSM) with immediate reconstruction (IR) in patients with locally advanced breast cancer are unclear. The purpose of this study is to compare the outcomes of women with noninflammatory Stage III SSM with IR vs. non-SSM-treated women who underwent neoadjuvant chemotherapy and adjuvant radiation therapy (XRT). Methods and Materials: Between October 1997 and March 2010, 100 consecutive patients (40 SSM with IR vs. 60 non-SSM) with Stage III breast cancer received anthracycline- and/or taxane-based neoadjuvant chemotherapy, mastectomy, and adjuvant XRT. Clinical stage (SSM with IR vs. for non-SSM) was IIIA (75% vs. 67%),more » IIIB (8% vs. 18%), and IIIC (8% vs. 8%). Tumors greater than 5 cm were found in 74% vs. 69%; 97% of patients in both groups were clinically node positive; and 8% vs. 18% had T4b disease. Results: The time from initial biopsy to XRT was prolonged for SSM-IR patients (274 vs. 254 days, p = 0.04), and there was a trend toward XRT delay of more than 8 weeks (52% vs. 31%, p = 0.07) after surgery. The rate of complications requiring surgical intervention was higher in the SSM-IR group (37.5% vs. 5%, p < 0.001). The 2-year actuarial locoregional control, breast cancer-specific survival, and overall survival rates for SSM with IR vs. non-SSM were 94.7% vs. 97.4%, 91.5% vs. 86.3%, and 87.4% vs. 84.8%, respectively (p = not significant). Conclusions: In our small study with limited follow-up, SSM with IR prolonged overall cancer treatment time and trended toward delaying XRT but did not impair oncologic outcomes. Complication rates were significantly higher in this group. Longer follow-up is needed.« less
Prabhu, Roshan; Godette, Karen; Carlson, Grant; Losken, Albert; Gabram, Sheryl; Fasola, Carolina; O'Regan, Ruth; Zelnak, Amelia; Torres, Mylin
2012-03-15
The safety and efficacy of skin-sparing mastectomy (SSM) with immediate reconstruction (IR) in patients with locally advanced breast cancer are unclear. The purpose of this study is to compare the outcomes of women with noninflammatory Stage III SSM with IR vs. non-SSM-treated women who underwent neoadjuvant chemotherapy and adjuvant radiation therapy (XRT). Between October 1997 and March 2010, 100 consecutive patients (40 SSM with IR vs. 60 non-SSM) with Stage III breast cancer received anthracycline- and/or taxane-based neoadjuvant chemotherapy, mastectomy, and adjuvant XRT. Clinical stage (SSM with IR vs. for non-SSM) was IIIA (75% vs. 67%), IIIB (8% vs. 18%), and IIIC (8% vs. 8%). Tumors greater than 5 cm were found in 74% vs. 69%; 97% of patients in both groups were clinically node positive; and 8% vs. 18% had T4b disease. The time from initial biopsy to XRT was prolonged for SSM-IR patients (274 vs. 254 days, p = 0.04), and there was a trend toward XRT delay of more than 8 weeks (52% vs. 31%, p = 0.07) after surgery. The rate of complications requiring surgical intervention was higher in the SSM-IR group (37.5% vs. 5%, p < 0.001). The 2-year actuarial locoregional control, breast cancer-specific survival, and overall survival rates for SSM with IR vs. non-SSM were 94.7% vs. 97.4%, 91.5% vs. 86.3%, and 87.4% vs. 84.8%, respectively (p = not significant). In our small study with limited follow-up, SSM with IR prolonged overall cancer treatment time and trended toward delaying XRT but did not impair oncologic outcomes. Complication rates were significantly higher in this group. Longer follow-up is needed. Copyright © 2012 Elsevier Inc. All rights reserved.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-23
..., shutdown, and malfunction (SSM). On October 16, 2009, the Court issued a mandate vacating these SSM....3rd 1019 (D.C. Cir. 2008). Accordingly, EPA no longer allows sources the SSM exemption as provided for... removed these SSM exemption provisions from the General Provisions of 40 CFR Part [[Page 63185
Ji, Xinran; Chen, Hua; Zhang, Yiling; Zhang, Lihai; Zhang, Wei; Berven, Sigurd; Tang, Peifu
2015-02-03
The aim of this study was to analyze and compare the surgical data, clinical outcomes, and complications between three-column osteotomy (3-COS) and standard surgical management (SSM) for the treatment of adult spine deformity (ASD). A total of 112 patients who underwent consecutive 3-COS (n = 48) and SSM (n = 64) procedures for ASD correction at a single institution from 2001 to 2011 were reviewed in this study. The outcomes were assessed using the Scoliosis Research Society (SRS)-22 scores. The complications of patients with 3-COS and SSM were also compared. No significant differences were found in patient characteristics between SSM and 3-COS groups. Surgical data and radiographic parameters showed that the patients of the 3-COS group suffered more severe ASD than those of the SSM group. The distribution of surgical complications revealed that SSM group underwent more complications than 3-COS groups with no significant differences. At final follow-up, the total SRS-22 score of SSM was not significant between pre-operation and post-operation. However, the total SRS-22 score of 3-COS at final follow-up was significantly higher than pre-operation. For severe ASD patients with high grade pelvic incidence (PI), pelvic tilt (PT), and PI/lumbar lordosis (LL) mismatch and who have subjected to spine surgeries more than twice before, 3-COS might be more effective than SSM in improving the clinical outcomes. However, due to the higher reoperation rate of 3-COS, SSM may be more appropriate than SSM for correcting the not serious ASD patients.
A single-station empirical model for TEC over the Antarctic Peninsula using GPS-TEC data
NASA Astrophysics Data System (ADS)
Feng, Jiandi; Wang, Zhengtao; Jiang, Weiping; Zhao, Zhenzhen; Zhang, Bingbing
2017-02-01
Compared with regional or global total electron content (TEC) empirical models, single-station TEC empirical models may exhibit higher accuracy in describing TEC spatial and temporal variations for a single station. In this paper, a new single-station empirical total electron content (TEC) model, called SSM-month, for the O'Higgins Station in the Antarctic Peninsula is proposed by using Global Positioning System (GPS)-TEC data from 01 January 2004 to 30 June 2015. The diurnal variation of TEC in the O'Higgins Station may have changing features in different months, sometimes even in opposite forms, because of ionospheric phenomena, such as the Mid-latitude Summer Nighttime Anomaly (MSNA). To avoid the influence of different diurnal variations, the concept of monthly modeling is proposed in this study. The SSM-month model, which is established by month (including 12 submodels that correspond to the 12 months), can effectively describe the diurnal variation of TEC in different months. Each submodel of the SSM-month model exhibits good agreement with GPS-TEC input data. Overall, the SSM-month model fits the input data with a bias of 0.03 TECU (total electron content unit, 1 TECU = 1016 el m-2) and a standard deviation of 2.78 TECU. This model, which benefits from the modeling method, can effectively describe the MSNA phenomenon without implementing any modeling correction. TEC data derived from Center for Orbit Determination in Europe global ionosphere maps (CODE GIMs), International Reference Ionosphere 2012 (IRI2012), and NeQuick are compared with the SSM-month model in the years of 2001 and 2015-2016. Result shows that the SSM-month model exhibits good consistency with CODE GIMs, which is better than that of IRI2012 and NeQuick, in the O'Higgins Station on the test days.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mehmani, Yashar; Oostrom, Martinus; Balhoff, Matthew
2014-03-20
Several approaches have been developed in the literature for solving flow and transport at the pore-scale. Some authors use a direct modeling approach where the fundamental flow and transport equations are solved on the actual pore-space geometry. Such direct modeling, while very accurate, comes at a great computational cost. Network models are computationally more efficient because the pore-space morphology is approximated. Typically, a mixed cell method (MCM) is employed for solving the flow and transport system which assumes pore-level perfect mixing. This assumption is invalid at moderate to high Peclet regimes. In this work, a novel Eulerian perspective on modelingmore » flow and transport at the pore-scale is developed. The new streamline splitting method (SSM) allows for circumventing the pore-level perfect mixing assumption, while maintaining the computational efficiency of pore-network models. SSM was verified with direct simulations and excellent matches were obtained against micromodel experiments across a wide range of pore-structure and fluid-flow parameters. The increase in the computational cost from MCM to SSM is shown to be minimal, while the accuracy of SSM is much higher than that of MCM and comparable to direct modeling approaches. Therefore, SSM can be regarded as an appropriate balance between incorporating detailed physics and controlling computational cost. The truly predictive capability of the model allows for the study of pore-level interactions of fluid flow and transport in different porous materials. In this paper, we apply SSM and MCM to study the effects of pore-level mixing on transverse dispersion in 3D disordered granular media.« less
Prediction of margin involvement and local recurrence after skin-sparing and simple mastectomy.
Al-Himdani, S; Timbrell, S; Tan, K T; Morris, J; Bundred, N J
2016-07-01
Skin-sparing mastectomy (SSM) facilitates immediate breast reconstruction. We investigated locoregional recurrence rates after SSM compared with simple mastectomy and the factors predicting oncological failure. Patients with early breast cancer that underwent mastectomy between 2000 and 2005 at a single institution were studied to ascertain local and systemic recurrence rates between groups. Kaplan-Meier curves and log-rank test were used to evaluate disease-free survival. Patients (n = 577) underwent simple mastectomy (80%) or SSM (20%). Median follow up was 80 months. Patients undergoing SSM were of younger average age, less often had involved lymph nodes (22% vs 44%, p < 0.001), more often had DCIS present (79% vs 53%, p < 0.001) and involved margins (29% vs 15%, p = 0.001). Involved surgical margins were associated with large size (p = 0.001). The 8-year local recurrence (LR) rates were 7.9% for SSM and 5% for simple mastectomy respectively (p = 0.35). Predictors of locoregional recurrence were lymph node involvement (HR 8.0, for >4 nodes, p < 0.001) and involved surgical margins (HR 3.3, p = 0.002). In node negative patients, SSM was a predictor of locoregional recurrence (HR 4.8 [1.1, 19.9], p = 0.033). Delayed reconstruction is more appropriate for node positive early breast cancer after post-mastectomy radiotherapy. Re-excision of involved margins is essential to prevent local recurrence after mastectomy. Copyright © 2016 Elsevier Ltd, BASO ~ the Association for Cancer Surgery, and the European Society of Surgical Oncology. All rights reserved.
Verzì, Anna Elisa; Bubley, Jeffrey A; Haugh, Alexandra M; Zhang, Bin; Wagner, Annette; Kruse, Lacey; West, Dennis P; Wayne, Jeffrey; Guitart, Joan; Gerami, Pedram
2017-11-01
The epidemiology of pediatric melanoma is distinct from that seen in adults. This is more distinguishable when pediatric patients are separated into prepubertal and adolescent groups. In this study, we compared epidemiologic, clinical, histologic, and molecular characteristics of pediatric superficial spreading melanoma (SSM) in prepubertal and adolescent patients to that in adults. We reviewed our database for pediatric melanomas, comparing SSM data between pediatric and adult cases for pathologic stage at presentation, ratio of radial to vertical growth phase, average Breslow depth and mitotic index, and frequency of fluorescence in situ hybridization (FISH) positivity. Of 84 pediatric melanomas, 38 were SSM, and 5 of the latter (6%) were prepubertal. There were no significant differences when pediatric and adult SSM were compared for stage at presentation, ratio of radial to vertical growth phase, average Breslow depth and mitotic count, or frequency of FISH positivity. A significant difference was detected for SSM arising from a precursor nevus (80% of pediatric cases versus 30% of adult cases). Follow-up time was limited for both cohorts. SSM melanoma is infrequent in childhood, particularly in the prepubertal years. Features such as tumor stage, Breslow depth, mitotic activity, and FISH positivity suggest morphologic and molecular characteristics similar to those of adult SSM. Copyright © 2017 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.
State Space Model with hidden variables for reconstruction of gene regulatory networks.
Wu, Xi; Li, Peng; Wang, Nan; Gong, Ping; Perkins, Edward J; Deng, Youping; Zhang, Chaoyang
2011-01-01
State Space Model (SSM) is a relatively new approach to inferring gene regulatory networks. It requires less computational time than Dynamic Bayesian Networks (DBN). There are two types of variables in the linear SSM, observed variables and hidden variables. SSM uses an iterative method, namely Expectation-Maximization, to infer regulatory relationships from microarray datasets. The hidden variables cannot be directly observed from experiments. How to determine the number of hidden variables has a significant impact on the accuracy of network inference. In this study, we used SSM to infer Gene regulatory networks (GRNs) from synthetic time series datasets, investigated Bayesian Information Criterion (BIC) and Principle Component Analysis (PCA) approaches to determining the number of hidden variables in SSM, and evaluated the performance of SSM in comparison with DBN. True GRNs and synthetic gene expression datasets were generated using GeneNetWeaver. Both DBN and linear SSM were used to infer GRNs from the synthetic datasets. The inferred networks were compared with the true networks. Our results show that inference precision varied with the number of hidden variables. For some regulatory networks, the inference precision of DBN was higher but SSM performed better in other cases. Although the overall performance of the two approaches is compatible, SSM is much faster and capable of inferring much larger networks than DBN. This study provides useful information in handling the hidden variables and improving the inference precision.
40 CFR Table 7 to Subpart Ppppp of... - Applicability of General Provisions to Subpart PPPPP
Code of Federal Regulations, 2014 CFR
2014-07-01
... equipment. § 63.6(e)(3) SSMP 1. Requirement for SSM and SSMP2. Content of SSMP. Yes. You must develop an... SSM You must comply with emission standards at all times except during SSM of control devices or... SSM of control devices and associated monitoring equipment only. § 63.6(f)(2)-(3) Methods for...
40 CFR Table 7 to Subpart Ppppp of... - Applicability of General Provisions to Subpart PPPPP
Code of Federal Regulations, 2011 CFR
2011-07-01
... equipment. § 63.6(e)(3) SSMP 1. Requirement for SSM and SSMP2. Content of SSMP. Yes. You must develop an... SSM You must comply with emission standards at all times except during SSM of control devices or... SSM of control devices and associated monitoring equipment only. § 63.6(f)(2)-(3) Methods for...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-20
..., shutdown, and malfunction (SSM). On October 16, 2009, the Court issued a mandate vacating these SSM....3rd 1019 (D.C. Cir. 2008). Accordingly, EPA no longer allows sources the SSM exemption as provided for... removed these SSM exemption provisions from the General Provisions of 40 CFR Part 63. Because Maryland...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-16
... malfunction (SSM). On October 16, 2009, the Court issued a mandate vacating these SSM exemption provisions.... 2008). Accordingly, EPA no longer allows sources the SSM exemption as provided for in the vacated provisions at 40 CFR Sec. 63.6(f)(1) and (h)(1), even though EPA has not yet formally removed these SSM...
40 CFR Table 7 to Subpart Ppppp of... - Applicability of General Provisions to Subpart PPPPP
Code of Federal Regulations, 2012 CFR
2012-07-01
... equipment. § 63.6(e)(3) SSMP 1. Requirement for SSM and SSMP2. Content of SSMP. Yes. You must develop an... SSM You must comply with emission standards at all times except during SSM of control devices or... SSM of control devices and associated monitoring equipment only. § 63.6(f)(2)-(3) Methods for...
40 CFR Table 7 to Subpart Ppppp of... - Applicability of General Provisions to Subpart PPPPP
Code of Federal Regulations, 2013 CFR
2013-07-01
... equipment. § 63.6(e)(3) SSMP 1. Requirement for SSM and SSMP2. Content of SSMP. Yes. You must develop an... SSM You must comply with emission standards at all times except during SSM of control devices or... SSM of control devices and associated monitoring equipment only. § 63.6(f)(2)-(3) Methods for...
STS-31 MS McCandless and MS Sullivan during JSC WETF underwater simulation
1990-03-05
This overall view shows STS-31 Mission Specialist (MS) Bruce McCandless II (left) and MS Kathryn D. Sullivan making a practice space walk in JSC's Weightless Environment Training Facility (WETF) Bldg 29 pool. McCandless works with a mockup of the remote manipulator system (RMS) end effector which is attached to a grapple fixture on the Hubble Space Telescope (HST) mockup. Sullivan manipulates HST hardware on the Support System Module (SSM) forward shell. SCUBA-equipped divers monitor the extravehicular mobility unit (EMU) suited crewmembers during this simulated extravehicular activity (EVA). No EVA is planned for the Hubble Space Telescope (HST) deployment, but the duo has trained for contingencies which might arise during the STS-31 mission aboard Discovery, Orbiter Vehicle (OV) 103. Photo taken by NASA JSC photographer Sheri Dunnette.
STS-31 MS McCandless and MS Sullivan during JSC WETF underwater simulation
NASA Technical Reports Server (NTRS)
1990-01-01
This overall view shows STS-31 Mission Specialist (MS) Bruce McCandless II (left) and MS Kathryn D. Sullivan making a practice space walk in JSC's Weightless Environment Training Facility (WETF) Bldg 29 pool. McCandless works with a mockup of the remote manipulator system (RMS) end effector which is attached to a grapple fixture on the Hubble Space Telescope (HST) mockup. Sullivan manipulates HST hardware on the Support System Module (SSM) forward shell. SCUBA-equipped divers monitor the extravehicular mobility unit (EMU) suited crewmembers during this simulated extravehicular activity (EVA). No EVA is planned for the Hubble Space Telescope (HST) deployment, but the duo has trained for contingencies which might arise during the STS-31 mission aboard Discovery, Orbiter Vehicle (OV) 103. Photo taken by NASA JSC photographer Sheri Dunnette.
Askar, Medhat; Sobecks, Ronald; Morishima, Yasuo; Kawase, Takakazu; Nowacki, Amy; Makishima, Hideki; Maciejewski, Jaroslaw
2011-09-01
HLA polymorphism remains a major hurdle for hematopoietic stem cell transplantation (HSCT). In 2004, Elsner et al. proposed the HistoCheck Web-based tool to estimate the allogeneic potential between HLA-mismatched stem cell donor/recipient pairs expressed as a sequence similarity matching (SSM). SSM is based on the structure of HLA molecules and the functional similarity of amino acids. According to this algorithm, a high SSM score represents high dissimilarity between MHC molecules, resulting in a potentially more deleterious impact on stem cell transplant outcomes. We investigated the potential of SSM to predict high-risk HLA allele mismatch combinations responsible for severe acute graft-versus-host disease (aGVHD grades III and IV) published by Kawase et al., by comparing SSM in low- and high-risk combinations. SSM was calculated for allele mismatch combinations using the HistoCheck tool available on the Web (www.histocheck.org). We compared ranges and means of SSM among high-risk (15 combinations observed in 722 donor/recipient pairs) versus low-risk allele combinations (94 combinations in 3490 pairs). Simulation scenarios were created where the recipient's HLA allele was involved in multiple allele mismatch combinations with at least 1 high-risk and 1 low-risk mismatch combination. SSM values were then compared. The mean SSM for high- versus low-risk combinations were 2.39 and 2.90 at A, 1.06 and 2.53 at B, 16.60 and 14.99 at C, 4.02 and 3.81 at DRB1, and 7.47 and 6.94 at DPB1 loci, respectively. In simulation scenarios, no predictable SSM association with high- or low-risk combinations could be distinguished. No DQB1 combinations met the statistical criteria for our study. In conclusion, our analysis demonstrates that mean SSM scores were not significantly different, and SSM distributions were overlapping among high- and low-risk allele combinations within loci HLA-A, B, C, DRB1, and DPB1. This analysis does not support selecting donors for HSCT recipients based on low HistoCheck SSM scores. Copyright © 2011 American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-26
..., shutdown, and malfunction (SSM). On October 16, 2009, the Court issued a mandate vacating these SSM... 1019 (DC Cir. 2008). Accordingly, EPA no longer allows sources the SSM exemption as provided for in the vacated provisions at 40 CFR 63.6(f)(1) and (h)(1), even though EPA has not yet formally removed these SSM...
Code of Federal Regulations, 2012 CFR
2012-07-01
... Status. (5) If you had a SSM during the reporting period and you took actions consistent with your SSM... periods of SSM. (i) The date and time that each malfunction started and stopped. (ii) The dates and times... started and stopped, and whether each deviation occurred during a period of SSM, or during another period...
Code of Federal Regulations, 2014 CFR
2014-07-01
... Status. (5) If you had a SSM during the reporting period and you took actions consistent with your SSM... periods of SSM. (i) The date and time that each malfunction started and stopped. (ii) The dates and times... started and stopped, and whether each deviation occurred during a period of SSM, or during another period...
Code of Federal Regulations, 2013 CFR
2013-07-01
... Status. (5) If you had a SSM during the reporting period and you took actions consistent with your SSM... periods of SSM. (i) The date and time that each malfunction started and stopped. (ii) The dates and times... started and stopped, and whether each deviation occurred during a period of SSM, or during another period...
Code of Federal Regulations, 2011 CFR
2011-07-01
... SSM during the reporting period and you took actions consistent with your SSM plan, the Compliance... information in paragraphs (d)(1)(i) through (xii) of this section. This includes periods of SSM. (i) The date... whether each deviation occurred during a period of SSM, or during another period. (v) A summary of the...
Jo, Il-Joo; Bae, Gi-Sang; Park, Kyoung-Chel; Choi, Sun Bok; Jung, Won-Seok; Jung, Su-Young; Cho, Jung-Hee; Choi, Mee-Ok; Song, Ho-Joon; Park, Sung-Joo
2013-03-14
To evaluate the inhibitory effects of Scolopendra subspinipes mutilans (SSM) on cerulein-induced acute pancreatitis (AP) in a mouse model. SSM water extract (0.1, 0.5, or 1 g/kg) was administrated intraperitoneally 1 h prior to the first injection of cerulein. Once AP developed, the stable cholecystokinin analogue, cerulein was injected hourly, over a 6 h period. Blood samples were taken 6 h later to determine serum amylase, lipase, and cytokine levels. The pancreas and lungs were rapidly removed for morphological examination, myeloperoxidase assay, and real-time reverse transcription polymerase chain reaction. To specify the role of SSM in pancreatitis, the pancreatic acinar cells were isolated using collagenase method. Then the cells were pre-treated with SSM, then stimulated with cerulein. The cell viability, cytokine productions and high-mobility group box protein-1 (HMGB-1) were measured. Furthermore, the regulating mechanisms of SSM action were evaluated. The administration of SSM significantly attenuated the severity of pancreatitis and pancreatitis associated lung injury, as was shown by the reduction in pancreatic edema, neutrophil infiltration, vacuolization and necrosis. SSM treatment also reduced pancreatic weight/body weight ratio, serum amylase, lipase and cytokine levels, and mRNA expression of multiple inflammatory mediators such as tumor necrosis factor-α and interleukin-1β. In addition, treatment with SSM inhibited HMGB-1 expression in the pancreas during AP. In accordance with in vivo data, SSM inhibited the cerulein-induced acinar cell death, cytokine, and HMGB-1 release. SSM also inhibited the activation of c-Jun NH2-terminal kinase, p38 and nuclear factor (NF)-κB. These results suggest that SSM plays a protective role during the development of AP and pancreatitis associated lung injury via deactivating c-Jun NH2-terminal kinase, p38 and NF-κB.
Sun, Junhui; Nguyen, Tiffany; Aponte, Angel M; Menazza, Sara; Kohr, Mark J; Roth, David M; Patel, Hemal H; Murphy, Elizabeth; Steenbergen, Charles
2015-05-01
Nitric oxide (NO) and protein S-nitrosylation (SNO) have been shown to play important roles in ischaemic preconditioning (IPC)-induced acute cardioprotection. The majority of proteins that show increased SNO following IPC are localized to the mitochondria, and our recent studies suggest that caveolae transduce acute NO/SNO cardioprotective signalling in IPC hearts. Due to the close association between subsarcolemmal mitochondria (SSM) and the sarcolemma/caveolae, we tested the hypothesis that SSM, rather than the interfibrillar mitochondria (IFM), are major targets for NO/SNO signalling derived from caveolae-associated eNOS. Following either control perfusion or IPC, SSM and IFM were isolated from Langendorff perfused mouse hearts, and SNO was analysed using a modified biotin switch method with fluorescent maleimide fluors. In perfusion control hearts, the SNO content was higher in SSM compared with IFM (1.33 ± 0.19, ratio of SNO content Perf-SSM vs. Perf-IFM), and following IPC SNO content significantly increased preferentially in SSM, but not in IFM (1.72 ± 0.17 and 1.07 ± 0.04, ratio of SNO content IPC-SSM vs. Perf-IFM, and IPC-IFM vs. Perf-IFM, respectively). Consistent with these findings, eNOS, caveolin-3, and connexin-43 were detected in SSM, but not in IFM, and IPC resulted in a further significant increase in eNOS/caveolin-3 levels in SSM. Interestingly, we did not observe an IPC-induced increase in SNO or eNOS/caveolin-3 in SSM isolated from caveolin-3(-/-) mouse hearts, which could not be protected with IPC. In conclusion, these results suggest that SSM may be the preferential target of sarcolemmal signalling-derived post-translational protein modification (caveolae-derived eNOS/NO/SNO), thus providing an important role in IPC-induced cardioprotection. Published by Oxford University Press on behalf of the European Society of Cardiology 2015. This work is written by (a) US Government employee(s) and is in the public domain in the US.
Jo, Il-Joo; Bae, Gi-Sang; Park, Kyoung-Chel; Choi, Sun Bok; Jung, Won-Seok; Jung, Su-Young; Cho, Jung-Hee; Choi, Mee-Ok; Song, Ho-Joon; Park, Sung-Joo
2013-01-01
AIM: To evaluate the inhibitory effects of Scolopendra subspinipes mutilans (SSM) on cerulein-induced acute pancreatitis (AP) in a mouse model. METHODS: SSM water extract (0.1, 0.5, or 1 g/kg) was administrated intraperitoneally 1 h prior to the first injection of cerulein. Once AP developed, the stable cholecystokinin analogue, cerulein was injected hourly, over a 6 h period. Blood samples were taken 6 h later to determine serum amylase, lipase, and cytokine levels. The pancreas and lungs were rapidly removed for morphological examination, myeloperoxidase assay, and real-time reverse transcription polymerase chain reaction. To specify the role of SSM in pancreatitis, the pancreatic acinar cells were isolated using collagenase method. Then the cells were pre-treated with SSM, then stimulated with cerulein. The cell viability, cytokine productions and high-mobility group box protein-1 (HMGB-1) were measured. Furthermore, the regulating mechanisms of SSM action were evaluated. RESULTS: The administration of SSM significantly attenuated the severity of pancreatitis and pancreatitis associated lung injury, as was shown by the reduction in pancreatic edema, neutrophil infiltration, vacuolization and necrosis. SSM treatment also reduced pancreatic weight/body weight ratio, serum amylase, lipase and cytokine levels, and mRNA expression of multiple inflammatory mediators such as tumor necrosis factor-α and interleukin-1β. In addition, treatment with SSM inhibited HMGB-1 expression in the pancreas during AP. In accordance with in vivo data, SSM inhibited the cerulein-induced acinar cell death, cytokine, and HMGB-1 release. SSM also inhibited the activation of c-Jun NH2-terminal kinase, p38 and nuclear factor (NF)-κB. CONCLUSION: These results suggest that SSM plays a protective role during the development of AP and pancreatitis associated lung injury via deactivating c-Jun NH2-terminal kinase, p38 and NF-κB. PMID:23539679
Rose, Amy E; Poliseno, Laura; Wang, Jinhua; Clark, Michael; Pearlman, Alexander; Wang, Guimin; Vega Y Saenz de Miera, Eleazar C; Medicherla, Ratna; Christos, Paul J; Shapiro, Richard; Pavlick, Anna; Darvishian, Farbod; Zavadil, Jiri; Polsky, David; Hernando, Eva; Ostrer, Harry; Osman, Iman
2011-04-01
Superficial spreading melanoma (SSM) and nodular melanoma (NM) are believed to represent sequential phases of linear progression from radial to vertical growth. Several lines of clinical, pathologic, and epidemiologic evidence suggest, however, that SSM and NM might be the result of independent pathways of tumor development. We utilized an integrative genomic approach that combines single nucleotide polymorphism array (6.0; Affymetrix) with gene expression array (U133A 2.0; Affymetrix) to examine molecular differences between SSM and NM. Pathway analysis of the most differentially expressed genes between SSM and NM (N = 114) revealed significant differences related to metabolic processes. We identified 8 genes (DIS3, FGFR1OP, G3BP2, GALNT7, MTAP, SEC23IP, USO1, and ZNF668) in which NM/SSM-specific copy number alterations correlated with differential gene expression (P < 0.05; Spearman's rank). SSM-specific genomic deletions in G3BP2, MTAP, and SEC23IP were independently verified in two external data sets. Forced overexpression of metabolism-related gene MTAP (methylthioadenosine phosphorylase) in SSM resulted in reduced cell growth. The differential expression of another metabolic-related gene, aldehyde dehydrogenase 7A1 (ALDH7A1), was validated at the protein level by using tissue microarrays of human melanoma. In addition, we show that the decreased ALDH7A1 expression in SSM may be the result of epigenetic modifications. Our data reveal recurrent genomic deletions in SSM not present in NM, which challenge the linear model of melanoma progression. Furthermore, our data suggest a role for altered regulation of metabolism-related genes as a possible cause of the different clinical behavior of SSM and NM.
Scolopendra subspinipes mutilans attenuates neuroinflammation in symptomatic hSOD1G93A mice
2013-01-01
Background Amyotrophic lateral sclerosis (ALS) is a progressive, adult-onset neurodegenerative disorder characterized by selective motor neuron death in the spinal cord, brainstem, and motor cortex. Neuroinflammation is one of several pathological causes of degenerating motor neurons and is induced by activated microglial cells and astrocytes in ALS. Scolopendra subspinipes mutilans (SSM) is utilized in traditional Chinese and Korean medicine for the treatment of a variety of diseases, such as cancer, apoplexy, and epilepsy. However, the mechanisms underlying the effects of SSM are currently unclear, even though SSM increases immune and antibiotic activity. Methods To determine the effects of SSM on symptomatic hSOD1G93A transgenic mice, SSM (2.5 μℓ/g) was injected bilaterally at the Zusanli (ST36) acupoint three times per week for two weeks. The effects of SSM treatment on anti-neuroinflammation in the brainstem and spinal cord of hSOD1G93A mice were assessed via Nissl and Fluoro-Jade B (FJB) staining, and immunohistochemistry using Iba-1, CD14, HO1, and NQO1 proteins was evaluated by Western blotting. Results In this study, we investigated whether SSM affects neuroinflammation in the spinal cord of symptomatic hSOD1G93A transgenic mice. We found that SSM treatment attenuated the loss of motor neurons and reduced the activation of microglial cells and astrocytes. Furthermore, we demonstrated that SSM administration in this animal model of ALS suppressed oxidative stress in the brainstem and spinal cord by 1.6- and 1.8-fold, respectively. Conclusions Our findings suggest that SSM, which has previously been used in complementary and alternative medicine (CAM), might also be considered as an anti-neuroinflammatory therapy for neurodegenerative diseases. PMID:24168240
Scolopendra subspinipes mutilans attenuates neuroinflammation in symptomatic hSOD1(G93A) mice.
Cai, MuDan; Choi, Sun-Mi; Song, Bong Keun; Son, Ilhong; Kim, Sungchul; Yang, Eun Jin
2013-10-29
Amyotrophic lateral sclerosis (ALS) is a progressive, adult-onset neurodegenerative disorder characterized by selective motor neuron death in the spinal cord, brainstem, and motor cortex. Neuroinflammation is one of several pathological causes of degenerating motor neurons and is induced by activated microglial cells and astrocytes in ALS.Scolopendra subspinipes mutilans (SSM) is utilized in traditional Chinese and Korean medicine for the treatment of a variety of diseases, such as cancer, apoplexy, and epilepsy. However, the mechanisms underlying the effects of SSM are currently unclear, even though SSM increases immune and antibiotic activity. To determine the effects of SSM on symptomatic hSOD1G93A transgenic mice, SSM (2.5 μℓ/g) was injected bilaterally at the Zusanli (ST36) acupoint three times per week for two weeks. The effects of SSM treatment on anti-neuroinflammation in the brainstem and spinal cord of hSOD1G93A mice were assessed via Nissl and Fluoro-Jade B (FJB) staining, and immunohistochemistry using Iba-1, CD14, HO1, and NQO1 proteins was evaluated by Western blotting. In this study, we investigated whether SSM affects neuroinflammation in the spinal cord of symptomatic hSOD1G93A transgenic mice. We found that SSM treatment attenuated the loss of motor neurons and reduced the activation of microglial cells and astrocytes. Furthermore, we demonstrated that SSM administration in this animal model of ALS suppressed oxidative stress in the brainstem and spinal cord by 1.6- and 1.8-fold, respectively. Our findings suggest that SSM, which has previously been used in complementary and alternative medicine (CAM), might also be considered as an anti-neuroinflammatory therapy for neurodegenerative diseases.
Rose, Amy E.; Poliseno, Laura; Wang, Jinhua; Clark, Michael; Pearlman, Alexander; Wang, Guimin; Vega y Saenz de Miera, Eleazar C.; Medicherla, Ratna; Christos, Paul J.; Shapiro, Richard; Pavlick, Anna; Darvishian, Farbod; Zavadil, Jiri; Polsky, David; Hernando, Eva; Ostrer, Harry; Osman, Iman
2011-01-01
Superficial spreading melanoma (SSM) and nodular melanoma (NM) are believed to represent sequential phases of linear progression from radial to vertical growth. Several lines of clinical, pathological and epidemiologic evidence suggest, however, that SSM and NM might be the result of independent pathways of tumor development. We utilized an integrative genomic approach that combines single nucleotide polymorphism array (SNP 6.0, Affymetrix) with gene expression array (U133A 2.0, Affymetrix) to examine molecular differences between SSM and NM. Pathway analysis of the most differentially expressed genes between SSM and NM (N=114) revealed significant differences related to metabolic processes. We identified 8 genes (DIS3, FGFR1OP, G3BP2, GALNT7, MTAP, SEC23IP, USO1, ZNF668) in which NM/SSM-specific copy number alterations correlated with differential gene expression (P<0.05, Spearman’s rank). SSM-specific genomic deletions in G3BP2, MTAP, and SEC23IP were independently verified in two external data sets. Forced overexpression of metabolism-related gene methylthioadenosine phosphorylase (MTAP) in SSM resulted in reduced cell growth. The differential expression of another metabolic related gene, aldehyde dehydrogenase 7A1 (ALDH7A1), was validated at the protein level using tissue microarrays of human melanoma. In addition, we show that the decreased ALDH7A1 expression in SSM may be the result of epigenetic modifications. Our data reveal recurrent genomic deletions in SSM not present in NM, which challenge the linear model of melanoma progression. Furthermore, our data suggest a role for altered regulation of metabolism-related genes as a possible cause of the different clinical behavior of SSM and NM. PMID:21343389
NASA Astrophysics Data System (ADS)
Jin, Yan; Ge, Yong; Wang, Jianghao; Heuvelink, Gerard B. M.
2018-06-01
Land surface soil moisture (SSM) has important roles in the energy balance of the land surface and in the water cycle. Downscaling of coarse-resolution SSM remote sensing products is an efficient way for producing fine-resolution data. However, the downscaling methods used most widely require full-coverage visible/infrared satellite data as ancillary information. These methods are restricted to cloud-free days, making them unsuitable for continuous monitoring. The purpose of this study is to overcome this limitation to obtain temporally continuous fine-resolution SSM estimations. The local spatial heterogeneities of SSM and multiscale ancillary variables were considered in the downscaling process both to solve the problem of the strong variability of SSM and to benefit from the fusion of ancillary information. The generation of continuous downscaled remote sensing data was achieved via two principal steps. For cloud-free days, a stepwise hybrid geostatistical downscaling approach, based on geographically weighted area-to-area regression kriging (GWATARK), was employed by combining multiscale ancillary variables with passive microwave remote sensing data. Then, the GWATARK-estimated SSM and China Soil Moisture Dataset from Microwave Data Assimilation SSM data were combined to estimate fine-resolution data for cloudy days. The developed methodology was validated by application to the 25-km resolution daily AMSR-E SSM product to produce continuous SSM estimations at 1-km resolution over the Tibetan Plateau. In comparison with ground-based observations, the downscaled estimations showed correlation (R ≥ 0.7) for both ascending and descending overpasses. The analysis indicated the high potential of the proposed approach for producing a temporally continuous SSM product at fine spatial resolution.
Buechter, Matthias; Manka, Paul; Theysohn, Jens M; Reinboldt, Marcus; Canbay, Ali; Kahraman, Alisan
2018-01-01
Transjugular intrahepatic portosystemic shunt (TIPS) is indicated in patients with decompensated portal hypertension (PH). Hepatic venous pressure gradient (HVPG) is considered gold standard for assessment of PH. Because HVPG measurement is invasive, non-invasive methods for evaluating severity of PH are warranted. We retrospectively correlated spleen stiffness as measured by FibroScan with HVPG in patients who underwent TIPS. Twenty-four patients with spleen stiffness measurement (SSM) one day before (D-1), one day after (D+1) and 28 days after TIPS (D+28) were included. SSM was positively correlated with pre-TIPS HVPG (HVPG <13mmHg, median SSM: 19.7±8.6kPa; HVPG 13-24mmHg, median SSM: 45.0±15.7kPa; HVPG >24mmHg, median SSM: 75.0±6.2kPa; p<0.05]; r 2 =0.72; p<0.001) and decreased significantly after TIPS implantation (D-1, median SSM: 67.1±17.3kPa; D+1, median SSM: 44.7±18.5kPa; D+28, median SSM: 35.6±17.0kPa; p<0.05), while liver stiffness measurement decrease was not statistically significant. Our study highlights the utility of SSM as non-invasive tool in patients with chronic liver disease in evaluating degree of PH potentially offering a confirmable additional parameter in surveillance of patients undergoing TIPS procedure. Copyright © 2017 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.
40 CFR Table 7 of Subpart Yyyy of... - Applicability of General Provisions to Subpart YYYY
Code of Federal Regulations, 2013 CFR
2013-07-01
...) SSMP Yes § 63.6(f)(1) Applicability of standards except during startup, shutdown, or malfunction (SSM... § 63.8(c)(1)(i) Routine and predictable SSM Yes § 63.8(c)(1)(ii) Parts for repair of CMS readily...)-(iii) Records related to SSM Yes § 63.10(b)(2)(iv)-(v) Records related to actions during SSM Yes § 63...
40 CFR Table 7 of Subpart Yyyy of... - Applicability of General Provisions to Subpart YYYY
Code of Federal Regulations, 2014 CFR
2014-07-01
...) SSMP Yes § 63.6(f)(1) Applicability of standards except during startup, shutdown, or malfunction (SSM... § 63.8(c)(1)(i) Routine and predictable SSM Yes § 63.8(c)(1)(ii) Parts for repair of CMS readily...)-(iii) Records related to SSM Yes § 63.10(b)(2)(iv)-(v) Records related to actions during SSM Yes § 63...
40 CFR Table 7 of Subpart Yyyy of... - Applicability of General Provisions to Subpart YYYY
Code of Federal Regulations, 2012 CFR
2012-07-01
...) SSMP Yes § 63.6(f)(1) Applicability of standards except during startup, shutdown, or malfunction (SSM... § 63.8(c)(1)(i) Routine and predictable SSM Yes § 63.8(c)(1)(ii) Parts for repair of CMS readily...)-(iii) Records related to SSM Yes § 63.10(b)(2)(iv)-(v) Records related to actions during SSM Yes § 63...
40 CFR Table 7 of Subpart Yyyy of... - Applicability of General Provisions to Subpart YYYY
Code of Federal Regulations, 2011 CFR
2011-07-01
...) SSMP Yes § 63.6(f)(1) Applicability of standards except during startup, shutdown, or malfunction (SSM... § 63.8(c)(1)(i) Routine and predictable SSM Yes § 63.8(c)(1)(ii) Parts for repair of CMS readily...)-(iii) Records related to SSM Yes § 63.10(b)(2)(iv)-(v) Records related to actions during SSM Yes § 63...
Patient-Reported Outcome Questionnaire for Systemic Mastocytosis
2017-01-06
Aggressive Systemic Mastocytosis (ASM); SM w Assoc Clonal Hema Non-mast Cell Lineage Disease (SM-AHNMD); Mast Cell Leukemia (MCL); Smoldering Systemic Mastocytosis (SSM); Indolent Systemic Mastocytosis (ISM) ISM Subgroup Fully Recruited
Data processing for the DMSP microwave radiometer system
NASA Technical Reports Server (NTRS)
Rigone, J. L.; Stogryn, A. P.
1977-01-01
A software program was developed and tested to process microwave radiometry data to be acquired by the microwave sensor (SSM/T) on the Defense Meteorological Satellite Program spacecraft. The SSM/T 7-channel microwave radiometer and systems data will be data-linked to Air Force Global Weather Central (AFGWC) where they will be merged with ephemeris data prior to product processing for use in the AFGWC upper air data base (UADB). The overall system utilizes an integrated design to provide atmospheric temperature soundings for global applications. The fully automated processing at AFGWC was accomplished by four related computer processor programs to produce compatible UADB soundings, evaluate system performance, and update the a priori developed inversion matrices. Tests with simulated data produced results significantly better than climatology.
40 CFR Table 9 to Subpart Vvvvvv... - Applicability of General Provisions to Subpart VVVVVV
Code of Federal Regulations, 2013 CFR
2013-07-01
... 63.6(e)(1)(i) and (ii), (e)(3), and (f)(1) SSM Requirements No See § 63.11495(d) for general duty... Emissions and CMS Operation No 63.8(c)(1)(iii) Requirement to Develop SSM Plan for CMS No 63.8(c)(4) Yes... sentence, which refers to an SSM plan. SSM plans are not required. 63.8(g)(1)-(g)(4) Yes Data reduction...
40 CFR Table 9 to Subpart Vvvvvv... - Applicability of General Provisions to Subpart VVVVVV
Code of Federal Regulations, 2014 CFR
2014-07-01
... 63.6(e)(1)(i) and (ii), (e)(3), and (f)(1) SSM Requirements No See § 63.11495(d) for general duty... Emissions and CMS Operation No 63.8(c)(1)(iii) Requirement to Develop SSM Plan for CMS No 63.8(c)(4) Yes... sentence, which refers to an SSM plan. SSM plans are not required. 63.8(g)(1)-(g)(4) Yes Data reduction...
40 CFR Table 17 to Subpart Xxxx of... - Applicability of General Provisions to This Subpart XXXX
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Compliance Except During SSM Yes No. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based on... SSM; not a violation to exceed standard during SSM Yes No. § 63.7(e)(2) Conditions for Conducting... Applies as modified by § 63.5990(e) and (f) No. § 63.8(c)(1)(i) Routine and Predictable SSM No No. § 63.8...
Multi-frequency SAR, SSM/I and AVHRR derived geophysical information of the marginal ice zone
NASA Technical Reports Server (NTRS)
Shuchman, R. A.; Onstott, R. G.; Wackerman, C. C.; Russel, C. A.; Sutherland, L. L.; Johannessen, O. M.; Johannessen, J. A.; Sandven, S.; Gloerson, P.
1991-01-01
A description is given of the fusion of synthetic aperture radar (SAR), special sensor microwave imager (SSM/I), and NOAA Advanced Very High Resolution Radiometer (AVHRR) data to study arctic processes. These data were collected during the SIZEX/CEAREX experiments that occurred in the Greenland Sea in March of 1989. Detailed comparisons between the SAR, AVHRR, and SSM/I indicated: (1) The ice edge position was in agreement to within 25 km, (2) The SSM/I SAR total ice concentration compared favorably, however, the SSM/I significantly underpredicted the multiyear fraction, (3) Combining high resolution SAR with SSM/I can potentially map open water and new ice features in the marginal ice zone (MIZ) which cannot be mapped by the single sensors, and (4) The combination of all three sensors provides accurate ice information as well as sea surface temperature and wind speeds.
Spleen and Liver Stiffness Is Positively Correlated with the Risk of Esophageal Variceal Bleeding.
Buechter, Matthias; Kahraman, Alisan; Manka, Paul; Gerken, Guido; Jochum, Christoph; Canbay, Ali; Dechêne, Alexander
2016-01-01
Portal hypertension (PH) is a common complication of chronic liver disease and results in esophageal and gastric variceal bleeding, which is associated with a high mortality rate. Measurement of the hepatic venous pressure gradient (HVPG) is considered the gold standard for diagnosing PH and estimating the risk of varices and bleeding. In contrast, upper gastrointestinal (GI) endoscopy (UGE) can reliably demonstrate the presence of varices and bleeding. Both measures are invasive, and HVPG is mainly restricted to tertiary centers. Therefore, the development of noninvasive methods of assessing the severity of PH and the risk of variceal bleeding is warranted. We retrospectively examined the correlation of spleen stiffness (SSM) and liver stiffness measurements (LSM) with the incidence of variceal bleeding among 143 patients who underwent combined liver and spleen elastography between 2013 and 2015. For 19 of 103 patients (16.8%), upper GI variceal bleeding was diagnosed and treated endoscopically. The median SSM of all patients was 35.3 kilopascals (kPa); the median LSM, 11.7 kPa. Patients with previous bleeding episodes had significantly higher SSM (75.0 kPa) and LSM (37.3 kPa) than those without a history of bleeding (SSM, 30.6 kPa; LSM, 8.2 kPa; p < 0.0001). Seventy-five patients (66.4%) underwent UGE in addition to SSM and LSM: 25 with no esophageal varices (EVs; SSM, 29.5 kPa; LSM, 11.4 kPa), 16 with EV grade 1 (SSM, 35.9 kPa; LSM, 33.4 kPa), 21 with EV grade 2 (SSM, 67.8 kPa; LSM, 27.0 kPa) and 13 with EV grade 3 (SSM, 75.0 kPa; LSM, 26.3 kPa). No statistically significant differences were found between respective grades of EV but were found between the presence and absence of varices. At a calculated cutoff level of 42.6 kPa (with application of 95% CI), SSM had sensitivity of 89% and specificity of 64% in determining the risk of bleeding, with a negative predictive value (NPV) of 0.97 (LSM sensitivity, 84%; LSM specificity, 80%; LSM NPV, 0.96 at LSM cutoff level of 20.8 kPa). When LSM (cutoff level, 20.8 kPa) and SSM (cutoff level, 42.6 kPa) were combined, the NPV was 1 (sensitivity, 100%; specificity, 55%). SSM and LSM as determined by FibroScan (a noninvasive method of detecting PH) is positively correlated with upper GI variceal bleeding (optimal SSM cutoff level, 42.6 kPa; optimal LSM cutoff level, 20.8 kPa). No patients with both SSM and LSM below cutoff levels had a history of bleeding complications. © 2016 S. Karger AG, Basel.
Asemu, Girma; O'Connell, Kelly A.; Cox, James W.; Dabkowski, Erinne R.; Xu, Wenhong; Ribeiro, Rogerio F.; Shekar, Kadambari C.; Hecker, Peter A.; Rastogi, Sharad; Sabbah, Hani N.; Hoppel, Charles L.
2013-01-01
Functional differences between subsarcolemmal and interfibrillar cardiac mitochondria (SSM and IFM) have been observed with aging and pathological conditions in rodents. Results are contradictory, and there is little information from large animal models. We assessed the respiratory function and resistance to mitochondrial permeability transition (MPT) in SSM and IFM from healthy young (1 yr) and old (8 yr) female beagles and in old beagles with hypertension and left ventricular (LV) wall thickening induced by 16 wk of aldosterone infusion. MPT was assessed in SSM and IFM by Ca2+ retention and swelling. Healthy young and old beagles had similar mitochondrial structure, respiratory function, and Ca2+-induced MPT within SSM and IFM subpopulations. On the other hand, oxidative capacity and resistance to Ca2+-induced MPT were significantly greater in IFM compared with SSM in all groups. Old beagles treated with aldosterone had greater LV wall thickness and worse diastolic filling but normal LV chamber volume and systolic function. Treatment with aldosterone did not alter mitochondrial respiratory function but accelerated Ca2+-induced MPT in SSM, but not IFM, compared with healthy old and young beagles. In conclusion, in a large animal model, oxidative capacity and resistance to MPT were greater in IFM than in SSM. Furthermore, aldosterone infusion increased susceptibility to MPT in SSM, but not IFM. Together this suggests that SSM are less resilient to acute stress than IFM in the healthy heart and are more susceptible to the development of pathology with chronic stress. PMID:23241318
Ben Younes, Lassad; Nakajima, Yoshikazu; Saito, Toki
2014-03-01
Femur segmentation is well established and widely used in computer-assisted orthopedic surgery. However, most of the robust segmentation methods such as statistical shape models (SSM) require human intervention to provide an initial position for the SSM. In this paper, we propose to overcome this problem and provide a fully automatic femur segmentation method for CT images based on primitive shape recognition and SSM. Femur segmentation in CT scans was performed using primitive shape recognition based on a robust algorithm such as the Hough transform and RANdom SAmple Consensus. The proposed method is divided into 3 steps: (1) detection of the femoral head as sphere and the femoral shaft as cylinder in the SSM and the CT images, (2) rigid registration between primitives of SSM and CT image to initialize the SSM into the CT image, and (3) fitting of the SSM to the CT image edge using an affine transformation followed by a nonlinear fitting. The automated method provided good results even with a high number of outliers. The difference of segmentation error between the proposed automatic initialization method and a manual initialization method is less than 1 mm. The proposed method detects primitive shape position to initialize the SSM into the target image. Based on primitive shapes, this method overcomes the problem of inter-patient variability. Moreover, the results demonstrate that our method of primitive shape recognition can be used for 3D SSM initialization to achieve fully automatic segmentation of the femur.
Asemu, Girma; O'Connell, Kelly A; Cox, James W; Dabkowski, Erinne R; Xu, Wenhong; Ribeiro, Rogerio F; Shekar, Kadambari C; Hecker, Peter A; Rastogi, Sharad; Sabbah, Hani N; Hoppel, Charles L; Stanley, William C
2013-02-15
Functional differences between subsarcolemmal and interfibrillar cardiac mitochondria (SSM and IFM) have been observed with aging and pathological conditions in rodents. Results are contradictory, and there is little information from large animal models. We assessed the respiratory function and resistance to mitochondrial permeability transition (MPT) in SSM and IFM from healthy young (1 yr) and old (8 yr) female beagles and in old beagles with hypertension and left ventricular (LV) wall thickening induced by 16 wk of aldosterone infusion. MPT was assessed in SSM and IFM by Ca(2+) retention and swelling. Healthy young and old beagles had similar mitochondrial structure, respiratory function, and Ca(2+)-induced MPT within SSM and IFM subpopulations. On the other hand, oxidative capacity and resistance to Ca(2+)-induced MPT were significantly greater in IFM compared with SSM in all groups. Old beagles treated with aldosterone had greater LV wall thickness and worse diastolic filling but normal LV chamber volume and systolic function. Treatment with aldosterone did not alter mitochondrial respiratory function but accelerated Ca(2+)-induced MPT in SSM, but not IFM, compared with healthy old and young beagles. In conclusion, in a large animal model, oxidative capacity and resistance to MPT were greater in IFM than in SSM. Furthermore, aldosterone infusion increased susceptibility to MPT in SSM, but not IFM. Together this suggests that SSM are less resilient to acute stress than IFM in the healthy heart and are more susceptible to the development of pathology with chronic stress.
Histology-specific microRNA alterations in melanoma.
Poliseno, Laura; Haimovic, Adele; Segura, Miguel F; Hanniford, Douglas; Christos, Paul J; Darvishian, Farbod; Wang, Jinhua; Shapiro, Richard L; Pavlick, Anna C; Berman, Russell S; Hernando, Eva; Zavadil, Jiri; Osman, Iman
2012-07-01
We examined the microRNA signature that distinguishes the most common melanoma histological subtypes, superficial spreading melanoma (SSM) and nodular melanoma (NM). We also investigated the mechanisms underlying the differential expression of histology-specific microRNAs. MicroRNA array performed on a training cohort of 82 primary melanoma tumors (26 SSM, 56 NM), and nine congenital nevi (CN) revealed 134 microRNAs differentially expressed between SSM and NM (P<0.05). Out of 134 microRNAs, 126 remained significant after controlling for thickness and 31 were expressed at a lower level in SSM compared with both NM and CN. For seven microRNAs (let-7g, miR-15a, miR-16, miR-138, miR-181a, miR-191, and miR-933), the downregulation was associated with selective genomic loss in SSM cell lines and primary tumors, but not in NM cell lines and primary tumors. The lower expression level of six out of seven microRNAs in SSM compared with NM was confirmed by real-time PCR on a subset of cases in the training cohort and validated in an independent cohort of 97 melanoma cases (38 SSM, 59 NM). Our data support a molecular classification in which SSM and NM are two molecularly distinct phenotypes. Therapeutic strategies that take into account subtype-specific alterations might improve the outcome of melanoma patients.
Histology-Specific MicroRNA Alterations in Melanoma
Poliseno, Laura; Haimovic, Adele; Segura, Miguel F.; Hanniford, Douglas; Christos, Paul J.; Darvishian, Farbod; Wang, Jinhua; Shapiro, Richard L.; Pavlick, Anna C.; Berman, Russell S.; Hernando, Eva; Zavadil, Jiri; Osman, Iman
2013-01-01
We examined the microRNA signature that distinguishes the most common melanoma histological subtypes, superficial spreading melanoma (SSM) and nodular melanoma (NM). We also investigated the mechanisms underlying the differential expression of histology-specific microRNAs. MicroRNA array performed on a training cohort of 82 primary melanoma tumors (26 SSM, 56 NM), and nine congenital nevi (CN) revealed 134 microRNAs differentially expressed between SSM and NM (P<0.05). Out of 134 microRNAs, 126 remained significant after controlling for thickness and 31 were expressed at a lower level in SSM compared with both NM and CN. For seven microRNAs (let-7g, miR-15a, miR-16, miR-138, miR-181a, miR-191, and miR-933), the downregulation was associated with selective genomic loss in SSM cell lines and primary tumors, but not in NM cell lines and primary tumors. The lower expression level of six out of seven microRNAs in SSM compared with NM was confirmed by real-time PCR on a subset of cases in the training cohort and validated in an independent cohort of 97 melanoma cases (38 SSM, 59 NM). Our data support a molecular classification in which SSM and NM are two molecularly distinct phenotypes. Therapeutic strategies that take into account subtype-specific alterations might improve the outcome of melanoma patients. PMID:22551973
40 CFR 63.11496 - What are the standards and compliance requirements for process vents?
Code of Federal Regulations, 2010 CFR
2010-07-01
...) Startup, shutdown, malfunction (SSM). Section 63.998(b)(2)(iii),(b)(6)(i)(A), and (d)(3) do not apply for.... (i) Startup, shutdown, and malfunction (SSM). References to SSM provisions in subparts that are...
40 CFR 63.11496 - What are the standards and compliance requirements for process vents?
Code of Federal Regulations, 2012 CFR
2012-07-01
...) Startup, shutdown, malfunction (SSM). Section 63.998(b)(2)(iii),(b)(6)(i)(A), and (d)(3) do not apply for.... (i) Startup, shutdown, and malfunction (SSM). References to SSM provisions in subparts that are...
40 CFR 63.11496 - What are the standards and compliance requirements for process vents?
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Startup, shutdown, malfunction (SSM). Section 63.998(b)(2)(iii),(b)(6)(i)(A), and (d)(3) do not apply for.... (i) Startup, shutdown, and malfunction (SSM). References to SSM provisions in subparts that are...
Summer Arctic ice concentrations and characteristics from SAR and SSM/I data
NASA Technical Reports Server (NTRS)
Comiso, Joey C.; Kwok, Ron
1993-01-01
The extent and concentration of the Summer minima provide indirect information about the long term ability of the perennial portion of the ice pack to survive the Arctic atmosphere and ocean system. Both active and passive microwave data were used with some success for monitoring the ice cover during the Summer, but they both suffer from similar problems caused by the presence of meltponding, surface wetness, flooding, and freeze/thaw cycles associated with periodic changes in surface air temperatures. A comparative analysis of ice conditions in the Arctic region using coregistered ERS-1 SAR (Synthetic Aperture Radar) and SSM/I (Special Sensor Microwave/Imager) data was made. The analysis benefits from complementary information from the two systems, the good spatial resolution of SAR data, and the good time resolution of and global coverage by SSM/I data. The results show that in many areas ice concentrations derived from SAR data are significantly different (usually higher) than those derived from passive microwave data. Additional insights about surface conditions can be inferred depending on the nature of the discrepancies.
Could less be more when assessing patient-rated outcome in spinal stenosis?
Mannion, Anne F; Fekete, Tamas F; Wertli, Maria M; Mattle, Michele; Nauer, Selina; Kleinstück, Frank S; Jeszenszky, Dezsö; Haschtmann, Daniel; Becker, Hans-Jürgen; Porchet, François
2015-05-15
Longitudinal study of the measurement properties of a brief outcome instrument. In patients undergoing surgery for lumbar spinal stenosis, we compared the responsiveness of the Core Outcome Measures Index (COMI) with that of the condition-specific Swiss Spinal Stenosis Measure (SSM), an instrument developed to assess patients with neurogenic claudication. The COMI is a validated multidimensional questionnaire for assessing the key outcomes of importance to patients with back problems. Being brief, it is associated with minimal respondent burden and high completion rates. However, for a given pathology, intuitively it may be expected to be less responsive than a condition-specific instrument. A total of 91 patients (73±8 yr; 53% males) completed the following questionnaires before surgery: COMI, SSM, Roland Morris Disability Questionnaire, back trouble "Feeling Thermometer," pain numeric rating scale, EuroQoL-visual analogue scale. Twelve months postoperatively, 78/91 (86%) completed all the questionnaires again; they also rated the "global treatment outcome" (GTO; rated 1-5) and SSM "satisfaction with treatment result" (SSM-sat; rated 1-4), which were used as external criteria of treatment success. Scores for the external criteria of success (GTO/SSM-sat) correlated with the change scores (baseline to 12 mo) in COMI (r=0.57) and SSM (r=0.54) to a similar extent. Using receiver operating characteristics, with GTO or SSM-sat dichotomized as external criterion, the area under the curve was similar for the COMI change score (0.86-0.90) and the SSM (sub)scales (0.80-0.90). With either SSM-sat or GTO serving as the external criterion, COMI was as responsive as the SSM. The COMI is well able to detect important change in lumbar spinal stenosis and has the added benefit of reducing the response burden for the patient and facilitating outcome comparisons with other spinal pathologies. 2.
Wong, Grace Lai-Hung; Kwok, Raymond; Chan, Henry Lik-Yuen; Tang, Stephen Pui-Kit; Lee, Eugenia; Lam, Thomas Chi-Ho; Lau, Tiffany Wing-Yan; Ma, Teresa Man-Kee; Wong, Betsy Chi-Kuen; Wong, Vincent Wai-Sun
2016-08-01
we aimed to investigate the accuracy of liver (LSM) spleen stiffness measurement (SSM) with transient elastography (TE) to predict varices in the presence of non-selective beta-blockers (NSBB). In this cross-sectional study of consecutive patients with chronic hepatitis B (CHB) and cirrhosis, all patients underwent TE and upper endoscopic examinations. LSM and SSM in predicting varices in patients receiving and not receiving NSBB were evaluated. Altogether 144 CHB patients (29 receiving NSBB; 35 with any varices, 31 and 11 with esophageal and gastric varices, respectively) were recruited. Their mean LSM and SSM were 13.3 ± 9.0 kPa and 32.8 ± 19.2 kPa, respectively. The correlation between LSM and SSM was better in the NSBB subgroup (r = 0.525, P = 0.003) than its counterpart (r = 0.329, P < 0.001). The area under receiver operating characteristic curve (AUROC) of LSM and SSM for any varices was 0.675 and 0.685 (P = 0.002 and 0.001), respectively. SSM of 18.9 kPa had a negative predictive value of 92.1% and negative likelihood ratio of 0.27 for ruling out any varices; and SSM of 54.9 kPa had a positive predictive value of 56.5% and a positive likelihood ratio of 4.05 to rule in varices. The AUROC of LSM for varices was 0.742 and 0.549 in patients with or without NSBB, respectively; the corresponding AUROC of SSM was 0.572 and 0.603, respectively. SSM only has modest accuracy to predict varices independent of NSBB use. An SSM cutoff value of 18.9 kPa may be adopted to achieve a high negative predictive value to rule out varices. © 2016 Chinese Medical Association Shanghai Branch, Chinese Society of Gastroenterology, Renji Hospital Affiliated to Shanghai Jiaotong University School of Medicine and John Wiley & Sons Australia, Ltd.
Miller, Mary Beth; Brett, Emma I; Leavens, Eleanor L; Meier, Ellen; Borsari, Brian; Leffingwell, Thad R
2016-06-01
The current study aimed to inform future interventions for heavy alcohol use and problems among college students by examining the utility of normative perceptions and coping strategies in predicting alcohol use among student service members/Veterans (SSM/Vs). SSM/Vs and civilian students (N=319) at a large university in the Southern Plains completed self-report measures of demographics, alcohol use and related behaviors, and coping strategies. Both SSM/Vs and civilian students significantly overestimated the typical weekly drinking quantities and frequencies of same-sex students on campus. Among SSM/Vs, normative perceptions of typical student (not military-specific) drinking and substance-related coping strategies significantly predicted drinks consumed per week, while substance-related coping predicted alcohol-related consequences. Despite the theoretical importance of similarity to normative referents, military-specific norms did not significantly improve the prediction of SSM/Vs' personal drinking behavior. Moreover, neither typical student nor military-specific norms predicted alcohol-related consequences among SSM/Vs after accounting for substance-related coping strategies. Future research may examine the efficacy of descriptive normative feedback and the importance of military-specific norms in alcohol interventions for SSM/Vs. Copyright © 2016 Elsevier Ltd. All rights reserved.
Miller, Mary Beth; Brett, Emma I.; Leavens, Eleanor L.; Meier, Ellen; Borsari, Brian; Leffingwell, Thad R.
2016-01-01
Objective The current study aimed to inform future interventions for heavy alcohol use and problems among college students by examining the utility of normative perceptions and coping strategies in predicting alcohol use among student service members/Veterans (SSM/Vs). Methods SSM/Vs and civilian students (N = 319) at a large university in the Southern Plains completed self-report measures of demographics, alcohol use and related behaviors, and coping strategies. Results Both SSM/Vs and civilian students significantly overestimated the typical weekly drinking quantities and frequencies of same-sex students on campus. Among SSM/Vs, normative perceptions of typical student (not military-specific) drinking and substance-related coping strategies significantly predicted drinks consumed per week, while substance-related coping predicted alcohol-related consequences. Conclusions Despite the theoretical importance of similarity to normative referents, military-specific norms did not significantly improve the prediction of SSM/Vs’ personal drinking behavior. Moreover, neither typical student nor military-specific norms predicted alcohol-related consequences among SSM/Vs after accounting for substance-related coping strategies. Future research may examine the efficacy of descriptive normative feedback and the importance of military-specific norms in alcohol interventions for SSM/Vs. PMID:26894552
Behavioral Health and Adjustment to College Life for Student Service Members/Veterans.
Schonfeld, Lawrence; Braue, Lawrence A; Stire, Sheryl; Gum, Amber M; Cross, Brittany L; Brown, Lisa M
2015-01-01
Increasing numbers of student service members/veterans (SSM/Vs) are enrolling in college. However, little is known about how their previous military experience affects their adjustment to this new role. The present study tested the hypothesis that SSM/Vs who report adjustment problems in college have a higher incidence of posttraumatic stress disorder (PTSD), depression, and other behavioral health problems compared with those who do not report adjustment problems. SSM/Vs (N = 173) at a large, southeastern, public university completed online surveys that included well-validated screens measuring substance use, depression, PTSD, and other mental disorders. Those reporting difficulties adjusting to university life (28%) reported significantly higher frequencies of behavioral and health problems while in the military, and significantly higher levels of PTSD, depression, and mental health disorders, but no difference in substance use. Implications for improved behavioral health screening and coordination of university behavioral health services with veterans' health systems are discussed.
Development of an automated electrical power subsystem testbed for large spacecraft
NASA Technical Reports Server (NTRS)
Hall, David K.; Lollar, Louis F.
1990-01-01
The NASA Marshall Space Flight Center (MSFC) has developed two autonomous electrical power system breadboards. The first breadboard, the autonomously managed power system (AMPS), is a two power channel system featuring energy generation and storage and 24-kW of switchable loads, all under computer control. The second breadboard, the space station module/power management and distribution (SSM/PMAD) testbed, is a two-bus 120-Vdc model of the Space Station power subsystem featuring smart switchgear and multiple knowledge-based control systems. NASA/MSFC is combining these two breadboards to form a complete autonomous source-to-load power system called the large autonomous spacecraft electrical power system (LASEPS). LASEPS is a high-power, intelligent, physical electrical power system testbed which can be used to derive and test new power system control techniques, new power switching components, and new energy storage elements in a more accurate and realistic fashion. LASEPS has the potential to be interfaced with other spacecraft subsystem breadboards in order to simulate an entire space vehicle. The two individual systems, the combined systems (hardware and software), and the current and future uses of LASEPS are described.
Park, Jae Hyung; Pak, Hui-Nam; Lee, Sak; Park, Han Ki; Seo, Jeong-Wook; Chang, Byung-Chul
2013-01-01
The existence of myofibroblasts (MFBs) and the role of subendocardial smooth muscle (SSM) layer of human atrial tissue in atrial fibrillation (AF) have not yet been elucidated. We hypothesized that the SSM layer and MFB play some roles in atrial structural remodeling and maintenance of valvular AF in patients who undergo cardiac surgery. We analyzed immunohistochemical staining of left atrial (LA) appendage tissues taken from 17 patients with AF and 15 patients remaining in sinus rhythm (SR) who underwent cardiac surgery (male 50.0%, 54.1 ± 14.2 years old, valve surgery 87.5%). SSM was quantified by α-smooth muscle actin (α-SMA) stain excluding vascular structure. MFB was defined as α-SMA+ cells with disorganized Connexin 43-positive gap junctions in Sirius red-positive fibrotic area. The SSM layer of atrium was significantly thicker in patients with AF than in those with SR (P=.0091). Patients with SSM layer ≥ 14 μm had a larger LA size (P=.0006) and greater fibrotic area (P=.0094) than those patients whose SSM layer <14 μm. MFBs were found in 7 of 17 (41.2%) patients with AF and 2 of 15 (13.3%) in SR group (P=.0456) in SSM area, colocalized with Periodic Acid-Schiff (PAS) stain-positive glycogen storage cells (95.5%). SSM layer was closely related to the existence of AF, degrees of atrial remodeling, and fibrosis in patients who underwent open heart surgery. We found that MFB does exist in SSM layer of human atrial tissue co-localized with PAS-positive cells. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.
Nguyen, Richard; Perfetto, Stephen; Mahnke, Yolanda D; Chattopadhyay, Pratip; Roederer, Mario
2013-03-01
After compensation, the measurement errors arising from multiple fluorescences spilling into each detector become evident by the spreading of nominally negative distributions. Depending on the instrument configuration and performance, and reagents used, this "spillover spreading" (SS) affects sensitivity in any given parameter. The degree of SS had been predicted theoretically to increase with measurement error, i.e., by the square root of fluorescence intensity, as well as directly related to the spectral overlap matrix coefficients. We devised a metric to quantify SS between any pair of detectors. This metric is intrinsic, as it is independent of fluorescence intensity. The combination of all such values for one instrument can be represented as a spillover spreading matrix (SSM). Single-stained controls were used to determine the SSM on multiple instruments over time, and under various conditions of signal quality. SSM values reveal fluorescence spectrum interactions that can limit the sensitivity of a reagent in the presence of brightly-stained cells on a different color. The SSM was found to be highly reproducible; its non-trivial values show a CV of less than 30% across a 2-month time frame. In addition, the SSM is comparable between similarly-configured instruments; instrument-specific differences in the SSM reveal underperforming detectors. Quantifying and monitoring the SSM can be a useful tool in instrument quality control to ensure consistent sensitivity and performance. In addition, the SSM is a key element for predicting the performance of multicolor immunofluorescence panels, which will aid in the optimization and development of new panels. We propose that the SSM is a critical component of QA/QC in evaluation of flow cytometer performance. Published 2013 Wiley Periodicals, Inc.
Santanelli di Pompeo, Fabio; Sorotos, Michail; Laporta, Rosaria; Pagnoni, Marco; Longo, Benedetto
2018-02-01
Excellent cosmetic results from skin-sparing mastectomy (SSM) are often impaired by skin flaps' necrosis (SFN), from 8%-25% or worse in smokers. This study prospectively investigated the efficacy of Double-Mirrored Omega Pattern (DMOP-SSM) compared to Wise Pattern SSM (WP-SSM) for immediate reconstruction in moderate/large-breasted smokers. From 2008-2010, DMOP-SSM was performed in 51 consecutive immediate breast reconstructions on 41 smokers (mean age = 49.8 years) with moderate/large and ptotic breasts. This active group (AG) was compared to a similar historical control group (CG) of 37 smokers (mean age = 51.1 years) who underwent WP-SSM and immediate breast reconstruction, with a mean follow-up of 37.6 months. Skin ischaemic complications, number of surgical revisions, time to wound healing, and patient satisfaction were analysed. Descriptive statistics were reported and comparison of performance endpoints was performed using Fisher's exact test and Mann-Whitney U-test. A p-value <.05 was considered significant. Patients' mean age (p = .316) and BMI (p = .215) were not statistically different between groups. Ischaemic complications occurred in 11.7% of DMOP-SSMs and in 32.4% of WP-SSMs (p = .017), and revision rates were, respectively, 5.8% and 24.3% (p = .012), both statistically significant. Mean time to wound healing was, respectively, 16.8 days and 18.4 days (p = .205). Mean patients' satisfaction scores were, respectively, 18.9 and 21.1, statistically significant (p = .022). Although tobacco use in moderate/large breasted patients can severely impair outcomes of breast reconstruction, the DMOP-SSM approach, compared to WP-SSM, allows smokers to benefit from SSM, but with statistically significant reduced skin flaps ischaemic complications, revision surgery, and better cosmetic outcomes.
Psychometric properties of the Dutch version of the self-sufficiency matrix (SSM-D).
Fassaert, Thijs; Lauriks, Steve; van de Weerd, Stef; Theunissen, Jan; Kikkert, Martijn; Dekker, Jack; Buster, Marcel; de Wit, Matty
2014-07-01
Measuring treatment outcomes can be challenging in patients who experience multiple interlinked problems, as is the case in public mental health care (PMHC). This study describes the development and psychometric properties of a Dutch version of the self-sufficiency matrix (SSM-D), an instrument that measures outcomes and originates from the US. In two different settings, clients were rated using the SSM-D in combination with the Health of the Nation Outcome Scales (HoNOS) and the Camberwell assessment of need short appraisal schedule (CANSAS). The results provided support for adequate psychometric properties of the SSM-D. The SSM-D had a solid single factor structure and internal consistency of the scale was excellent. In addition, convergent validity of the SSM-D was indicated by strong correlations between HoNOS and CANSAS, as well as between several subdomains. Further research is needed to establish whether the results presented here can be obtained in other PMHC settings.
Implementing Speed and Separation Monitoring in Collaborative Robot Workcells.
Marvel, Jeremy A; Norcross, Rick
2017-04-01
We provide an overview and guidance for the Speed and Separation Monitoring methodology as presented in the International Organization of Standardization's technical specification 15066 on collaborative robot safety. Such functionality is provided by external, intelligent observer systems integrated into a robotic workcell. The SSM minimum protective distance function equation is discussed in detail, with consideration for the input values, implementation specifications, and performance expectations. We provide analytical analyses and test results of the current equation, discuss considerations for implementing SSM in human-occupied environments, and provide directions for technological advancements toward standardization.
Implementing Speed and Separation Monitoring in Collaborative Robot Workcells
Marvel, Jeremy A.; Norcross, Rick
2016-01-01
We provide an overview and guidance for the Speed and Separation Monitoring methodology as presented in the International Organization of Standardization's technical specification 15066 on collaborative robot safety. Such functionality is provided by external, intelligent observer systems integrated into a robotic workcell. The SSM minimum protective distance function equation is discussed in detail, with consideration for the input values, implementation specifications, and performance expectations. We provide analytical analyses and test results of the current equation, discuss considerations for implementing SSM in human-occupied environments, and provide directions for technological advancements toward standardization. PMID:27885312
Age-related changes in ceruloplasmin content in W/SSM rats.
Kim, L B
2008-12-01
The content of ceruloplasmin was studied in W/SSM rats with hereditary galactosemia. Carbohydrate component constitutes about 40% of the molecule of this antioxidant. The content of ceruloplasmin in 2- and 11-month-old W/SSM rats was elevated compared to the corresponding parameters in Wistar rats.
76 FR 40258 - Approval and Promulgation of Implementation Plans; State of NE
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-08
... the CAA and EPA's policies addressing such excess emissions (``SSM''); and (ii) existing provisions... believes that some states may have existing SIP approved SSM provisions that are contrary to the CAA and... State provisions with regard to excess emissions during SSM of operations at facilities.'' EPA further...
Brown, A D
1997-02-01
This paper examines the attempt by a District Health Authority (DHA) to create structures (called Purchasing Strategy Groups or PSGs) to facilitate the effective development of its purchasing strategy. The paper is based on a case study design conducted using Soft Systems Methodology (SSM). The research contribution the paper makes is twofold. First, it analyses some of the fundamental management-related difficulties that a DHA can experience when attempting to come to terms with its role and responsibilities in the 1990s. Second, it provides a discussion and evaluation of the utility of SSM for qualitative research in the National Health Service (NHS) in the UK.
Arctic coastal polynya observations with ERS-1 SAR and DMSP SSM/I
NASA Technical Reports Server (NTRS)
Cavalieri, D. J.; Onstott, R. G.
1993-01-01
Work to improve the characterization of the distribution of new and young sea ice types and open water amount within Arctic coastal polynyas through the combined use of ERS-1 SAR (Synthetic Aperture Radar) and DMSP SSM/I (Defense Meteorological Satellite Program Special Sensor Microwave/Imager) data is described. Two St. Lawrence Island polynya events are studied using low resolution, geocoded SAR images and coincident SSM/I data. The SAR images are analyzed in terms of polarization and spectral gradient ratios. Results of the combined analysis show that the SAR ice type classification is consistent with that from SSM/I and that the combined use of SAR and SSM/I can improve the characterization of thin ice better than either data set can do alone.
SSM/I and ECMWF Wind Vector Comparison
NASA Technical Reports Server (NTRS)
Wentz, Frank J.; Ashcroft, Peter D.
1996-01-01
Wentz was the first to convincingly show that satellite microwave radiometers have the potential to measure the oceanic wind vector. The most compelling evidence for this conclusion was the monthly wind vector maps derived solely from a statistical analysis of Special Sensor Microwave Imager (SSM/I) observations. In a qualitative sense, these maps clearly showed the general circulation over the world's oceans. In this report we take a closer look at the SSM/I monthly wind vector maps and compare them to European Center for Medium-Range Weather Forecasts (ECMWF) wind fields. This investigation leads both to an empirical comparison of SSM/I calculated wind vectors with ECMWF wind vectors, and to an examination of possible reasons that the SSM/I calculated wind vector direction would be inherently more reliable at some locations than others.
Gruel, Jérémy; LeBorgne, Michel; LeMeur, Nolwenn; Théret, Nathalie
2011-09-12
Regulation of gene expression plays a pivotal role in cellular functions. However, understanding the dynamics of transcription remains a challenging task. A host of computational approaches have been developed to identify regulatory motifs, mainly based on the recognition of DNA sequences for transcription factor binding sites. Recent integration of additional data from genomic analyses or phylogenetic footprinting has significantly improved these methods. Here, we propose a different approach based on the compilation of Simple Shared Motifs (SSM), groups of sequences defined by their length and similarity and present in conserved sequences of gene promoters. We developed an original algorithm to search and count SSM in pairs of genes. An exceptional number of SSM is considered as a common regulatory pattern. The SSM approach is applied to a sample set of genes and validated using functional gene-set enrichment analyses. We demonstrate that the SSM approach selects genes that are over-represented in specific biological categories (Ontology and Pathways) and are enriched in co-expressed genes. Finally we show that genes co-expressed in the same tissue or involved in the same biological pathway have increased SSM values. Using unbiased clustering of genes, Simple Shared Motifs analysis constitutes an original contribution to provide a clearer definition of expression networks.
2011-01-01
Background Regulation of gene expression plays a pivotal role in cellular functions. However, understanding the dynamics of transcription remains a challenging task. A host of computational approaches have been developed to identify regulatory motifs, mainly based on the recognition of DNA sequences for transcription factor binding sites. Recent integration of additional data from genomic analyses or phylogenetic footprinting has significantly improved these methods. Results Here, we propose a different approach based on the compilation of Simple Shared Motifs (SSM), groups of sequences defined by their length and similarity and present in conserved sequences of gene promoters. We developed an original algorithm to search and count SSM in pairs of genes. An exceptional number of SSM is considered as a common regulatory pattern. The SSM approach is applied to a sample set of genes and validated using functional gene-set enrichment analyses. We demonstrate that the SSM approach selects genes that are over-represented in specific biological categories (Ontology and Pathways) and are enriched in co-expressed genes. Finally we show that genes co-expressed in the same tissue or involved in the same biological pathway have increased SSM values. Conclusions Using unbiased clustering of genes, Simple Shared Motifs analysis constitutes an original contribution to provide a clearer definition of expression networks. PMID:21910886
van Verschuer, Victorien M T; Mureau, Marc A M; Gopie, Jessica P; Vos, Elvira L; Verhoef, Cornelis; Menke-Pluijmers, Marian B E; Koppert, Linetta B
2016-08-01
Prophylactic skin-sparing mastectomy (SSM) and nipple-sparing mastectomy (NSM) both are associated with major risk reduction in women with high breast cancer risk. Skin-sparing mastectomy followed by nipple-areola complex (NAC) reconstruction is standard of care, but NSM is increasingly being performed. Preservation of the NAC in NSM may increase patient satisfaction. Therefore, we measured NAC sensitivity after NSM and compared patient satisfaction as well as body image after SSM with NSM. Women who underwent prophylactic bilateral SSM or NSM and immediate implant breast reconstruction between 2002 and 2012 were eligible. Patient satisfaction was assessed using the Breast-Q reconstruction questionnaire, body image using Hopwood's body image scale (BIS), and satisfaction with the (reconstructed) NAC using a study-specific questionnaire. In the NSM group, NAC sensitivity was assessed using Semmes Weinstein monofilaments with a 5-point scale and compared with NAC sensitivity in a nonoperated control group. The SSM group comprised 25 women (50 SSMs) and the NSM group 20 women (39 NSMs). Median follow-up was 65 months in the SSM group compared with 27 months in the NSM group (P < 0.01). In univariable analyses, Breast-Q scores were favorable in the SSM group compared with the NSM group with trends for higher "satisfaction with breasts" (66.2 vs 56.6; P = 0.06) and "satisfaction with outcome" (76.1 vs 61.5; P = 0.09). Mean BIS score of 7.1/30 in the SSM group and 9.3/30 in the NSM group (P = 0.35). Adjusted for follow-up, there were no significant differences in Breast-Q scores, nor in BIS scores. Interestingly, satisfaction with the (reconstructed) NAC was similar after SSM and NSM. Nipple-areola complex sensitivity was lower in the NSM group (mean score, 1.9; 95% confidence interval, 1.5-2.3) compared with the control group (mean score, 4.7; 95% confidence interval, 4.6-4.9; P < 0.01). Breast-Q scores regarding satisfaction with breasts and overall outcome were in favor of the SSM group. Residual NAC sensitivity after NSM was low. This suggests that SSM followed by NAC reconstruction is a balanced alternative to NSM. We observed no significant differences in body image and NAC-specific satisfaction between the NSM and SSM groups.
SSM-Based Electrophysiology for Transporter Research.
Bazzone, Andre; Barthmes, Maria; Fendler, Klaus
2017-01-01
Functional characterization of transport proteins using conventional electrophysiology can be challenging, especially for low turnover transporters or transporters from bacteria and intracellular compartments. Solid-supported membrane (SSM)-based electrophysiology is a sensitive and cell-free assay technique for the characterization of electrogenic membrane proteins. Purified proteins reconstituted into proteoliposomes or membrane vesicles from cell culture or native tissues are adsorbed to the sensor holding an SSM. A substrate or a ligand is applied via rapid solution exchange. The electrogenic transporter activity charges the sensor, which is recorded as a transient current. The high stability of the SSM allows cumulative measurements on the same sensor using different experimental conditions. This allows the determination of kinetic properties including EC 50 , IC 50 , K m , K D , and rate constants of electrogenic reactions. About 100 different transporters have been measured so far using this technique, among them symporters, exchangers, uniporters, ATP-, redox-, and light-driven ion pumps, as well as receptors and ion channels. Different instruments apply this technique: the laboratory setups use a closed flow-through arrangement, while the commercially available SURFE 2 R N1 resembles a pipetting robot. For drug screening purposes high-throughput systems, such as the SURFE 2 R 96SE enable the simultaneous measurement of up to 96 sensors. © 2017 Elsevier Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
Tao, Wei-Kuo; Lang, S.; Simpson, J.; Olson, W. S.; Johnson, D.; Ferrier, B.; Kummerow, C.; Adler, R.
1999-01-01
Latent heating profiles associated with three (TOGA COARE) Tropical Ocean and Global Atmosphere Coupled Ocean Atmosphere Response Experiment active convective episodes (December 10-17 1992; December 19-27 1992; and February 9-13 1993) are examined using the Goddard Cumulus Ensemble (GCE) Model and retrieved by using the Goddard Convective and Stratiform Heating (CSH) algorithm . The following sources of rainfall information are input into the CSH algorithm: Special Sensor Microwave Imager (SSM/1), Radar and the GCE model. Diagnostically determined latent heating profiles calculated using 6 hourly soundings are used for validation. The GCE model simulated rainfall and latent heating profiles are in excellent agreement with those estimated by soundings. In addition, the typical convective and stratiform heating structures (or shapes) are well captured by the GCE model. Radar measured rainfall is smaller than that both estimated by the GCE model and SSM/I in all three different COARE IFA periods. SSM/I derived rainfall is more than the GCE model simulated for the December 19-27 and February 9-13 periods, but is in excellent agreement with the GCE model for the December 10-17 period. The GCE model estimated stratiform amount is about 50% for December 19-27, 42% for December 11-17 and 56% for the February 9-13 case. These results are consistent with large-scale analyses. The accurate estimates of stratiform amount is needed for good latent heating retrieval. A higher (lower) percentage of stratiform rain can imply a maximum heating rate at a higher (lower) altitude. The GCE model always simulates more stratiform rain (10 to 20%) than the radar for all three convective episodes. SSM/I derived stratiform amount is about 37% for December 19-27, 48% for December 11-17 and 41% for the February 9-13 case. Temporal variability of CSH algorithm retrieved latent heating profiles using either GCE model simulated or radar estimated rainfall and stratiform amount is in good agreement with that diagnostically determined for all three periods. However, less rainfall and a smaller stratiform percentage estimated by radar resulted in a weaker (underestimated) latent heating profile and a lower maximum latent heating level compared to those determined diagnostically. Rainfall information from SSM/I can not retrieve individual convective events due to poor temporal sampling. Nevertheless, this study suggests that a good 4r, rainfall retrieval from SSM/I for a convective event always leads to a good latent heating retrieval. Sensitivity testing has been performed and the results indicate that the SSM/I derived time averaged stratiform amount may be underestimated for December 19-27. Time averaged heating profiles derived from SSM/I, however, are not in bad agreement with those derived by soundings for the December 10-17 convective period. The heating retrievals may be more accurate for longer time scales provided there is no bias in the sampling.
Andersson, Pål; Stark, Karolina; Xu, Shulan; Nordén, Maria; Dverstorp, Björn
2017-11-01
For the first time, a system for specific consideration of radiological environmental protection has been applied in a major license application in Sweden. In 2011 the Swedish Nuclear Fuel & Waste Management Co. (SKB) submitted a license application for construction of a geological repository for spent nuclear fuel at the Forsmark site. The license application is supported by a post-closure safety assessment, which in accordance with regulatory requirements includes an assessment of environmental consequences. SKB's environmental risk assessment uses the freely available ERICA Tool. Environmental media activity concentrations needed as input to the tool are calculated by means of complex biosphere modelling based on site-specific information gathered from site investigations, as well as from supporting modelling studies and projections of future biosphere conditions in response to climate change and land rise due to glacial rebound. SKB's application is currently being reviewed by the Swedish Radiation Safety Authority (SSM). In addition to a traditional document review with an aim to determine whether SKB's models are relevant, correctly implemented and adequately parametrized, SSM has performed independent modelling in order to gain confidence in the robustness of SKB's assessment. Thus, SSM has used alternative stylized reference biosphere models to calculate environmental activity concentrations for use in subsequent exposure calculations. Secondly, an alternative dose model (RESRAD-BIOTA) is used to calculate doses to biota that are compared with SKB's calculations with the ERICA tool. SSM's experience from this review is that existing tools for environmental dose assessment are possible to use in order to show compliance with Swedish legislation. However, care is needed when site representative species are assessed with the aim to contrast them to generic reference organism. The alternative modelling of environmental concentrations resulted in much lower concentrations compared to SKB's results. However, SSM judges that SKB's in this part conservative approach is relevant for a screening assessment. SSM also concludes that there are big differences in dose rates calculated to different organisms depending on which tool that is used, although not systematically higher for either of them. Finally, independent regulatory modelling has proven valuable for SSM's review in gaining understanding and confidence in SKB's assessment presented in the license application. Copyright © 2017 Elsevier Ltd. All rights reserved.
Large space telescope, phase A. Volume 1: Executive summary
NASA Technical Reports Server (NTRS)
1972-01-01
The Phase A study of the Large Space Telescope (LST) is reported. The study defines an LST concept based on the broad mission guidelines provided by the Office of Space Science (OSS), the scientific requirements developed by OSS with the scientific community, and an understanding of long range NASA planning current at the time the study was performed. The LST is an unmanned astronomical observatory facility, consisting of an optical telescope assembly (OTA), scientific instrument package (SIP), and a support systems module (SSM). The report consists of five volumes. The report describes the constraints and trade off analyses that were performed to arrive at a reference design for each system and for the overall LST configuration. A low cost design approach was followed in the Phase A study. This resulted in the use of standard spacecraft hardware, the provision for maintenance at the black box level, growth potential in systems designs, and the sharing of shuttle maintenance flights with other payloads.
Lindner, Franziska; Mühlberg, Reinhard; Wiegand, Johannes; Tröltzsch, Michael; Hoffmeister, Albrecht; Keim, Volker; Karlas, Thomas
2018-06-01
Recurrent ascitic decompensation is a frequent complication of advanced alcoholic liver disease. Ascites can be controlled by transjugular intrahepatic portosystemic shunt (TIPS) implantation, but specific pre-procedural outcome predictors are not well established. Liver and spleen stiffness measurement (LSM, SSM) correlate with outcome of compensated liver disease, but data for decompensated cirrhosis disease are scarce. Therefore, the predictive value of LSM and SSM was evaluated in patients with refractory ascites treated with TIPS insertion or receiving conservative therapy. Patients with alcoholic liver cirrhosis and recurrent or refractory ascites were stratified according to TIPS eligibility. LSM was prospectively assessed by transient elastography (TE, XL probe) and point shear wave elastography (pSWE). pSWE was also used for SSM. The primary study endpoint was transplant-free survival after 12 months. In addition, correlation of LSM and SSM with TIPS complications was analyzed. 43 patients (16 % female, age 55.5 [28.6 - 79.6] years) were recruited, n = 20 underwent TIPS and n = 23 were treated with repeated paracenteses only. 15 patients died and five underwent liver transplantation during follow-up. LSM and SSM at baseline did not predict the patients' outcome in the TIPS cohort and in patients with conservative therapy. SSM was increased in two cases with spontaneous TIPS occlusion and declined after revision. LSM and SSM cannot be recommended for risk stratification in cirrhotic patients with refractory ascites. SSM may be useful in monitoring TIPS function during follow-up. © Georg Thieme Verlag KG Stuttgart · New York.
Kovacs, E M R; Westerterp-Plantenga, M S; Saris, W H M; Melanson, K J; Goossens, I; Geurten, P; Brouns, F
2002-08-01
To investigate whether addition of modified guar gum (GG) to a low-energy semisolid meal might be effective on appetite by modifying the response of blood glucose and other blood parameters. Three intervention periods of 2 weeks each, separated by washout periods of 4 weeks. Randomized and cross-over design. Fifteen overweight male subjects (mean+/-s.d.; age, 44+/-9 y; body mass index, 28.6+/-1.8 kg/m(2)). Subjects consumed a low-energy diet divided over three times a day, consisting of a semisolid meal with (SSM+) or without (SSM) addition of 2.5 g GG, or a solid meal (SM) with the same energy content (947 kJ) and macronutrient composition, plus a dinner of the subject's own choice. At the end of each intervention, time and number of meal initiations, dynamics of blood glucose and other blood parameters, and appetite ratings such as hunger and satiety were determined in a time-blinded situation. The changes in blood glucose from meal initiation to blood glucose peak and from peak to nadir were smaller with SSM+ and SM compared to SSM. Satiety before the third meal was higher with SSM+ and SM compared to SSM (P<0.01). Meal pattern, general appetite and total energy intake were similar for all treatments. We conclude that, similar to SM, SSM+ resulted in a more moderate change in blood glucose compared to SSM and positively affected satiety before the third meal, while general appetite, total energy intake and meal pattern did not differ.
40 CFR Table 8 to Subpart Zzzz of... - Applicability of General Provisions to Subpart ZZZZ.
Code of Federal Regulations, 2012 CFR
2012-07-01
... predictable SSM Yes. § 63.8(c)(1)(ii) SSM not in Startup Shutdown Malfunction Plan Yes. § 63.8(c)(1)(iii...)-(v) Records related to SSM No. § 63.10(b)(2)(vi)-(xi) Records Yes. § 63.10(b)(2)(xii) Record when...
40 CFR 63.2520 - What reports must I submit and when?
Code of Federal Regulations, 2014 CFR
2014-07-01
... report. (3) Date of report and beginning and ending dates of the reporting period. (4) For each SSM... SSM. (A) The total operating time of the affected source during the reporting period. (B) Information...) of this section. This includes periods of SSM. (A) The date and time that each CMS was inoperative...
49 CFR 222.57 - Can parties seek review of the Associate Administrator's actions?
Code of Federal Regulations, 2013 CFR
2013-10-01
... the Associate Administrator granting or denying an application for approval of a new SSM or ASM under... demonstration of the proposed new SSM or ASM , the highway or traffic control authority or law enforcement authority having control over vehicular traffic at the crossings affected by the new SSM/ASM demonstration...
40 CFR Table 8 to Subpart Zzzz of... - Applicability of General Provisions to Subpart ZZZZ.
Code of Federal Regulations, 2011 CFR
2011-07-01
... predictable SSM Yes. § 63.8(c)(1)(ii) SSM not in Startup Shutdown Malfunction Plan Yes. § 63.8(c)(1)(iii...)-(v) Records related to SSM No. § 63.10(b)(2)(vi)-(xi) Records Yes. § 63.10(b)(2)(xii) Record when...
49 CFR 222.57 - Can parties seek review of the Associate Administrator's actions?
Code of Federal Regulations, 2012 CFR
2012-10-01
... the Associate Administrator granting or denying an application for approval of a new SSM or ASM under... demonstration of the proposed new SSM or ASM , the highway or traffic control authority or law enforcement authority having control over vehicular traffic at the crossings affected by the new SSM/ASM demonstration...
49 CFR 222.57 - Can parties seek review of the Associate Administrator's actions?
Code of Federal Regulations, 2014 CFR
2014-10-01
... the Associate Administrator granting or denying an application for approval of a new SSM or ASM under... demonstration of the proposed new SSM or ASM , the highway or traffic control authority or law enforcement authority having control over vehicular traffic at the crossings affected by the new SSM/ASM demonstration...
Srisakuldee, Wattamon; Makazan, Zhanna; Nickel, Barbara E; Zhang, Feixiong; Thliveris, James A; Pasumarthi, Kishore B S; Kardami, Elissavet
2014-07-01
Fibroblast growth factor 2 (FGF-2) protects the heart from ischaemia- and reperfusion-induced cell death by a mechanism linked to protein kinase C (PKC)ε-mediated connexin 43 (Cx43) phosphorylation. Cx43 localizes predominantly to gap junctions, but has also been detected at subsarcolemmal (SSM), but not interfibrillar (IFM), mitochondria, where it is considered important for cardioprotection. We have now examined the effect of FGF-2 administration to the heart on resistance to calcium-induced permeability transition (mPTP) of isolated SSM vs. IFM suspensions, in relation to mitochondrial PKCε/Cx43 levels, phosphorylation, and the presence of peptide Gap27, a Cx43 channel blocker. FGF-2 perfusion increased resistance to calcium-induced mPTP in SSM and IFM suspensions by 2.9- and 1.7-fold, respectively, compared with their counterparts from vehicle-perfused hearts, assessed spectrophotometrically as cyclosporine A-inhibitable swelling. The salutary effect of FGF-2 was lost in SSM, but not in IFM, in the presence of Gap27. FGF-2 perfusion increased relative levels of PKCε, phospho(p) PKCε, and Tom-20 translocase in SSM and IFM, and of Cx43 in SSM. Phospho-serine (pS) 262- and pS368-Cx43 showed a 30- and 8-fold increase, respectively, in SSM from FGF-2-treated, compared with untreated, hearts. Stimulation of control SSM with phorbol 12-myristate 13-acetate (PMA), a PKC activator, increased both calcium tolerance and mitochondrial Cx43 phosphorylation at S262 and S368. The PMA-induced phosphorylation of mitochondrial Cx43 was prevented by εV1-2, a PKCε-inhibiting peptide. SSM are more responsive than IFM to FGF-2-triggered protection from calcium-induced mPTP, by a mitochondrial Cx43 channel-mediated pathway, associated with mitochondrial Cx43 phosphorylation at PKCε target sites. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.
[4D-MRI using the synchronized sampling method (SSM)].
Shimada, Yasuhiro; Fujimoto, Ichirou; Takemoto, Hironori; Takano, Sayoko; Masaki, Shinobu; Honda, Kiyoshi; Takeo, Kazuhiro
2002-12-01
A synchronized sampling method (SSM) was developed for the study of voluntary movements by combining the electrocardiographic (ECG) gating method with an external triggering device, and four-dimensional magnetic resonance imaging (4D-MRI) at a rate of 30 frames per second was accomplished by volumetric imaging with the SSM. This method was first applied to the motion imaging of articulatory organs during repetitions of a Japanese five-vowel sequence, and the dynamic change in vocal tract area function was demonstrated with sufficient temporal resolution. This paper describes the methodology, applicability, and limitations of 4D-MRI with the SSM.
Cross-cultural adaptation of the German version of the spinal stenosis measure.
Wertli, Maria M; Steurer, Johann; Wildi, Lukas M; Held, Ulrike
2014-06-01
To validate the German version of the spinal stenosis measure (SSM), a disease-specific questionnaire assessing symptom severity, physical function, and satisfaction with treatment in patients with lumbar spinal stenosis. After translation, cross-cultural adaptation, and pilot testing, we assessed internal consistency, test-retest reliability, construct validity, and responsiveness of the SSM subscales. Data from a large Swiss multi-center prospective cohort study were used. Reference scales for the assessment of construct validity and responsiveness were the numeric rating scale, pain thermometer, and the Roland Morris Disability Questionnaire. One hundred and eight consecutive patients were included in this validation study, recruited from five different centers. Cronbach's alpha was above 0.8 for all three subscales of the SSM. The objectivity of the SSM was assessed using a partial credit approach. The model showed a good global fit to the data. Of the 108 patients 78 participated in the test-retest procedure. The ICC values were above 0.8 for all three subscales of the SSM. Correlations with reference scales were above 0.7 for the symptom and function subscales. For satisfaction subscale, it was 0.66 or above. Clinically meaningful changes of the reference scales over time were associated with significantly more improvement in all three SSM subscales (p < 0.001). Conclusion: The proposed version of the SSM showed very good measurement properties and can be considered validated for use in the German language.
NASA Astrophysics Data System (ADS)
Gotti, Riccardo; Prevedelli, Marco; Kassi, Samir; Marangoni, Marco; Romanini, Daniele
2018-02-01
We apply a feed-forward frequency control scheme to establish a phase-coherent link from an optical frequency comb to a distributed feedback (DFB) diode laser: This allows us to exploit the full laser tuning range (up to 1 THz) with the linewidth and frequency accuracy of the comb modes. The approach relies on the combination of an RF single-sideband modulator (SSM) and of an electro-optical SSM, providing a correction bandwidth in excess of 10 MHz and a comb-referenced RF-driven agile tuning over several GHz. As a demonstration, we obtain a 0.3 THz cavity ring-down scan of the low-pressure methane absorption spectrum. The spectral resolution is 100 kHz, limited by the self-referenced comb, starting from a DFB diode linewidth of 3 MHz. To illustrate the spectral resolution, we obtain saturation dips for the 2ν3 R(6) methane multiplet at μbar pressure. Repeated measurements of the Lamb-dip positions provide a statistical uncertainty in the kHz range.
40 CFR Table 8 to Subpart Kkkkk of... - Applicability of General Provisions to Subpart KKKKK
Code of Federal Regulations, 2012 CFR
2012-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR 63.4720 - What reports must I submit?
Code of Federal Regulations, 2014 CFR
2014-07-01
... this section. This includes periods of SSM during which deviations occurred. (i) The beginning and... each deviation occurred during a period of SSM or during another period. (ix) A summary of the total... completing the tests as specified in § 63.10(d)(2). (c) SSM reports. If you used the emission rate with add...
40 CFR 63.9355 - What records must I keep?
Code of Federal Regulations, 2010 CFR
2010-07-01
... occurred during a period of SSM of the control device and associated monitoring equipment. (2) The records in § 63.6(e)(3)(iii) through (v) related to SSM. (3) The records required to show continuous... records in § 63.6(e)(3)(iii) through (v) related to SSM of the control device and associated monitoring...
40 CFR 63.9355 - What records must I keep?
Code of Federal Regulations, 2012 CFR
2012-07-01
... occurred during a period of SSM of the control device and associated monitoring equipment. (2) The records in § 63.6(e)(3)(iii) through (v) related to SSM. (3) The records required to show continuous... records in § 63.6(e)(3)(iii) through (v) related to SSM of the control device and associated monitoring...
40 CFR Table 7 to Subpart Jjjjj of... - Applicability of General Provisions to Subpart JJJJJ
Code of Federal Regulations, 2014 CFR
2014-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR 63.2870 - What parts of the General Provisions apply to me?
Code of Federal Regulations, 2013 CFR
2013-07-01
... requirements No Report SSM and in accordance with § 63.2861(c) and (d). § 63.6(e)(3)(viii) Operation and maintenance requirements Yes Except, report each revision to your SSM plan in accordance with § 63.2861(c....6(f)-(g) Compliance with nonopacity emission standards except during SSM Comply with emission...
40 CFR 63.2870 - What parts of the General Provisions apply to me?
Code of Federal Regulations, 2014 CFR
2014-07-01
... requirements No Report SSM and in accordance with § 63.2861(c) and (d). § 63.6(e)(3)(viii) Operation and maintenance requirements Yes Except, report each revision to your SSM plan in accordance with § 63.2861(c....6(f)-(g) Compliance with nonopacity emission standards except during SSM Comply with emission...
75 FR 54223 - Petition for Waiver of Compliance
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-03
... Measures (SSM) as follows: 1 crossing with gates and non-traversable curb medians and 1 crossing with four...-Rule Quiet Zone or in a separate Pre-Rule Quiet Zone. A SSM consisting of gates with a non-traversable... that the addition of Hubbards Lane with its SSM, results in a Quiet Zone Risk Index (QZRI) for the 6...
40 CFR 63.9355 - What records must I keep?
Code of Federal Regulations, 2014 CFR
2014-07-01
... occurred during a period of SSM of the control device and associated monitoring equipment. (2) The records in § 63.6(e)(3)(iii) through (v) related to SSM. (3) The records required to show continuous... records in § 63.6(e)(3)(iii) through (v) related to SSM of the control device and associated monitoring...
40 CFR Table 7 to Subpart Jjjjj of... - Applicability of General Provisions to Subpart JJJJJ
Code of Federal Regulations, 2013 CFR
2013-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR Table 7 to Subpart Jjjjj of... - Applicability of General Provisions to Subpart JJJJJ
Code of Federal Regulations, 2011 CFR
2011-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR Table 10 to Subpart Ddddd... - Applicability of General Provisions to Subpart DDDDD
Code of Federal Regulations, 2012 CFR
2012-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for SSM and startup, shutdown, malfunction plan; and content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM Comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based on...
40 CFR 63.2870 - What parts of the General Provisions apply to me?
Code of Federal Regulations, 2012 CFR
2012-07-01
... requirements No Report SSM and in accordance with § 63.2861(c) and (d). § 63.6(e)(3)(viii) Operation and maintenance requirements Yes Except, report each revision to your SSM plan in accordance with § 63.2861(c....6(f)-(g) Compliance with nonopacity emission standards except during SSM Comply with emission...
40 CFR Table 8 to Subpart Zzzz of... - Applicability of General Provisions to Subpart ZZZZ.
Code of Federal Regulations, 2014 CFR
2014-07-01
... predictable SSM No § 63.8(c)(1)(ii) SSM not in Startup Shutdown Malfunction Plan Yes. § 63.8(c)(1)(iii... SSM No. § 63.10(b)(2)(vi)-(xi) Records Yes. § 63.10(b)(2)(xii) Record when under waiver Yes. § 63.10(b...
40 CFR Table 8 to Subpart Zzzz of... - Applicability of General Provisions to Subpart ZZZZ.
Code of Federal Regulations, 2013 CFR
2013-07-01
... predictable SSM No § 63.8(c)(1)(ii) SSM not in Startup Shutdown Malfunction Plan Yes. § 63.8(c)(1)(iii... SSM No. § 63.10(b)(2)(vi)-(xi) Records Yes. § 63.10(b)(2)(xii) Record when under waiver Yes. § 63.10(b...
40 CFR 63.9355 - What records must I keep?
Code of Federal Regulations, 2013 CFR
2013-07-01
... occurred during a period of SSM of the control device and associated monitoring equipment. (2) The records in § 63.6(e)(3)(iii) through (v) related to SSM. (3) The records required to show continuous... records in § 63.6(e)(3)(iii) through (v) related to SSM of the control device and associated monitoring...
40 CFR Table 8 to Subpart Kkkkk of... - Applicability of General Provisions to Subpart KKKKK
Code of Federal Regulations, 2014 CFR
2014-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR 63.1960 - How is compliance determined?
Code of Federal Regulations, 2014 CFR
2014-07-01
... have deviated from the requirements of this subpart. Finally, you must develop a written SSM plan according to the provisions in 40 CFR 63.6(e)(3). A copy of the SSM plan must be maintained on site. Failure to write or maintain a copy of the SSM plan is a deviation from the requirements of this subpart. [68...
40 CFR 63.9355 - What records must I keep?
Code of Federal Regulations, 2011 CFR
2011-07-01
... occurred during a period of SSM of the control device and associated monitoring equipment. (2) The records in § 63.6(e)(3)(iii) through (v) related to SSM. (3) The records required to show continuous... records in § 63.6(e)(3)(iii) through (v) related to SSM of the control device and associated monitoring...
40 CFR 63.1960 - How is compliance determined?
Code of Federal Regulations, 2012 CFR
2012-07-01
... have deviated from the requirements of this subpart. Finally, you must develop a written SSM plan according to the provisions in 40 CFR 63.6(e)(3). A copy of the SSM plan must be maintained on site. Failure to write or maintain a copy of the SSM plan is a deviation from the requirements of this subpart. [68...
40 CFR Table 8 to Subpart Kkkkk of... - Applicability of General Provisions to Subpart KKKKK
Code of Federal Regulations, 2013 CFR
2013-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR 63.1960 - How is compliance determined?
Code of Federal Regulations, 2013 CFR
2013-07-01
... have deviated from the requirements of this subpart. Finally, you must develop a written SSM plan according to the provisions in 40 CFR 63.6(e)(3). A copy of the SSM plan must be maintained on site. Failure to write or maintain a copy of the SSM plan is a deviation from the requirements of this subpart. [68...
40 CFR 63.4720 - What reports must I submit?
Code of Federal Regulations, 2012 CFR
2012-07-01
... this section. This includes periods of SSM during which deviations occurred. (i) The beginning and... each deviation occurred during a period of SSM or during another period. (ix) A summary of the total... completing the tests as specified in § 63.10(d)(2). (c) SSM reports. If you used the emission rate with add...
40 CFR Table 10 to Subpart Ddddd... - Applicability of General Provisions to Subpart DDDDD
Code of Federal Regulations, 2011 CFR
2011-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for SSM and startup, shutdown, malfunction plan; and content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM Comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based on...
40 CFR Table 8 to Subpart Kkkkk of... - Applicability of General Provisions to Subpart KKKKK
Code of Federal Regulations, 2011 CFR
2011-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR Table 7 to Subpart Jjjjj of... - Applicability of General Provisions to Subpart JJJJJ
Code of Federal Regulations, 2012 CFR
2012-07-01
..., Shutdown, and Malfunction Plan (SSMP) Requirement for startup, shutdown, and malfunction (SSM) and SSMP; content of SSMP Yes. § 63.6(f)(1) Compliance Except During SSM You must comply with emission standards at all times except during SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Compliance based...
40 CFR 63.2520 - What reports must I submit and when?
Code of Federal Regulations, 2013 CFR
2013-07-01
... report and beginning and ending dates of the reporting period. (4) For each SSM during which excess... paragraphs (e)(5)(ii)(A) through (C) of this section. This includes periods of SSM. (A) The total operating... periods of SSM. (A) The date and time that each CMS was inoperative, except for zero (low-level) and high...
NASA Astrophysics Data System (ADS)
Fleischer, Peter; Bowles, Frederick A.; Richardson, Michael D.
1998-05-01
Identification of optimal sites for the isolation of waste on the abyssal seafloor was performed with two approaches: by the traditional method of map overlays of relevant attributes, and by a specially developed, automated Site-Selection Model (SSM). Five initial, Surrogate Sites, identified with the map-overlay approach, were then compared with the more rigorously produced scores from the SSM. The SSM, a process for optimization of site locations, accepts subjective, expert-based judgments and transforms them into a quantitative, reproducible, and documented product. The SSM is adaptable to any siting scenario. Forty-one factors relevant to the isolation scenario, including 21 weightable factors having a total of 123 scorable categories, have been entered into the SSM. Factors are grouped under project definition, unique environments, anthropogenic, geologic, biologic, weather, oceanographic and distance criteria. The factor scores are linked to a georeferenced database array of all factors, corresponding to 1°×1° latitude-longitude squares. The SSM includes a total of 2241 one-degree squares within 1000 n.m. of the U.S. coasts, including the western North Atlantic, the Gulf of Mexico, and the eastern North Pacific. Under a carefully weighted and scored scenario of isolation, the most favorable sites identified with the SSM are on the Hatteras and Nares Abyssal Plains in the Atlantic. High-scoring sites are also located in the Pacific abyssal hills province between the Murray and Molokai Fracture Zones. Acceptable 1° squares in the Gulf of Mexico are few and of lower quality, with the optimum location on the northern Sigsbee Abyssal Plain. Two of the five Surrogate Site locations, on the Hatteras and Sigsbee Abyssal Plains, correspond to the best SSM sites in each ocean area. Two Pacific and a second Atlantic Surrogate Site are located in low-scoring regions or excluded by the SSM. Site-selection results from the SSM, although robust, are an initial attempt to quantify the site-selection process. The SSM database exposes a significant lack of high-quality information for many areally mappable attributes on the abyssal seafloor, particularly bottom-current speed and measures of biologic productivity and flux. Terminologies and classifications of some measures, such as sediment types, suffer from parochialism and vary by ocean. Considerable research is needed even for a broad understanding of the environmental measures required to make sound societal decisions about use of the abyssal seafloor for disposal or other purposes.
NASA Technical Reports Server (NTRS)
Chang, L. Aron
1995-01-01
This document describes the progress of the task of the Millimeter-wave Imaging Radiometer (MIR) data processing and the development of water vapor retrieval algorithms, for the second six-month performing period. Aircraft MIR data from two 1995 field experiments were collected and processed with a revised data processing software. Two revised versions of water vapor retrieval algorithm were developed, one for the execution of retrieval on a supercomputer platform, and one for using pressure as the vertical coordinate. Two implementations of incorporating products from other sensors into the water vapor retrieval system, one from the Special Sensor Microwave Imager (SSM/I), the other from the High-resolution Interferometer Sounder (HIS). Water vapor retrievals were performed for both airborne MIR data and spaceborne SSM/T-2 data, during field experiments of TOGA/COARE, CAMEX-1, and CAMEX-2. The climatology of water vapor during TOGA/COARE was examined by SSM/T-2 soundings and conventional rawinsonde.
Jackson, Rubie Sue; Sanders, Thomas; Park, Adrian; Buras, Robert; Liang, Wen; Harris, Christine; Mylander, Charles; Rosman, Martin; Holton, Luther; Singh, Devinder; Martino, Laura; Tafra, Lorraine
2017-10-01
Nipple-sparing mastectomy (NSM) is more technically challenging than skin-sparing mastectomy (SSM) but offers quality-of-life and cosmetic advantages. However, surgeon physical symptoms related to NSM workload have not been documented. This was a prospective study using questionnaires to compare surgeon-reported physical symptoms before, during, and after NSM versus SSM. Surgeons also answered general questions about each mastectomy. Bilateral cases were performed simultaneously by two surgeons, who completed independent questionnaires. Questionnaires were completed after 82 SSMs and 44 NSMs. On a 0-10 scale, surgeons reported NSM was more physically demanding than SSM (7.0 vs. 4.5, p < 0.001). Mean visualization was more difficult (5.7 vs. 3.2, p < 0.001) and mean fatigue score was greater (5.6 vs. 3.1, p < 0.001) after NSM than SSM. The mean increase in neck pain (on a 0-4 scale) was greater for NSM than SSM, both from before-to-during surgery (0.8 vs. 0.2, p = 0.003) and before-to-after surgery (0.9 vs. 0.2, p = 0.002). The mean increase in lower back pain was greater for NSM than SSM, both from before-to-during surgery (0.7 vs. 0.2, p = 0.008) and before-to-after surgery (0.9 vs. 0.2, p = 0.003). Surgeons reported that NSM was more mentally demanding (p < 0.001), complex (p = 0.01), and difficult (p < 0.001) than SSM. Surgeons experienced greater physical symptoms, mental strain, and fatigue with NSM than SSM. This raises concern that mild but repetitive pain over the course of a breast surgeon's career may lead to repetitive stress injury.
Kvaskoff, Marina; Siskind, Victor; Green, Adèle C
2012-02-01
To investigate risk factors for lentigo maligna melanoma (LMM) compared with superficial spreading melanoma (SSM). Population-based case-control study in Queensland, Australia. General community. Population-based sample of 49 patients with LMM and 141 with SSM (in situ or invasive) aged 14 to 86 years at diagnosis in 1979 and 1980 and 232 control subjects. Response rates were 97.1% in cases and 91.8% in controls. Risks of both subtypes in relation to phenotypic and environmental factors, estimated by multinomial logistic regression. The number of solar lentigines was the strongest determinant for LMM (odds ratio [OR], 15.93; P < .001 for trend) and significantly weaker for SSM (4.61; P < .001 for trend; P = .04 for homogeneity). Skin cancer history was significantly associated with LMM (OR, 2.84) but not with SSM (1.33; P = .07 for homogeneity). In contrast, the number of nevi was the strongest determinant for SSM (OR, 23.22; P < .001 for trend) while significantly weaker for LMM (3.60; P = .02 for trend; P < .001 for homogeneity). Multiple lifetime sunburns almost tripled the risk for SSM, whereas no association was detected with LMM (P = .04 for homogeneity). Shared risk factors for both subtypes were the number of solar keratoses (P < .001 for trend for both) and sun-sensitive complexion (ie, light eye/hair colors, sunburn propensity, and freckling) (2-fold to 5-fold increased risks). A propensity to lentigines is a stronger predictor of LMM, whereas high nevus propensity is a stronger predictor of SSM. Skin cancer history appears to determine LMM risk only, whereas the number of lifetime sunburns determines SSM only. Prevention strategies could be tailored differently given these distinctive points of difference.
Koncsos, Gábor; Varga, Zoltán V; Baranyai, Tamás; Ferdinandy, Péter; Schulz, Rainer; Giricz, Zoltán; Boengler, Kerstin
In the heart, subsarcolemmal (SSM), interfibrillar (IFM) and perinuclear mitochondria represent three subtypes of mitochondria. The most commonly used protease during IFM isolation is the nagarse, however, its effect on the detection of mitochondrial proteins is still unclear. Therefore, we investigated whether nagarse treatment influences the quantification of mitochondrial proteins. SSM and IFM were isolated from hearts of mice and rats. During IFM isolation, nagarse activity was either stopped by centrifugation (common protocol, IFM+N) or inhibited by phenylmethylsulfonyl fluoride (PMSF, IFM+N+I). The amounts of proteins located in different mitochondrial compartments (outer membrane: mitofusin 1 (MFN1) and 2 (MFN2); intermembrane space: p66shc; inner membrane (connexin 43 (Cx43)), and of protein deglycase DJ-1 were determined by Western blot. MFN2 and Cx43 were found predominantly in SSM isolated from mouse and rat hearts. MFN1 and p66shc were present in similar amounts in SSM and IFM+N, whereas the level of DJ-1 was higher in IFM+N compared to SSM. In IFM+N+I samples from mice, the amount of MFN2, but not that of Cx43 increased. Nagarse or nagarse inhibition by PMSF had no effect on oxygen consumption of SSM or IFM. Whereas the use of the common protocol indicates the localization of MFN2 predominantly in SSM, the inhibition of nagarse by PMSF increases the signal of MFN2 in IFM to that of in SSM, indicating an underestimation of MFN2 in IFM. Therefore, protease sensitivity should be considered when assessing distribution of mitochondrial proteins using nagarse-based isolation. Copyright © 2018 Elsevier Inc. All rights reserved.
Holmuhamedov, Ekhson L.; Oberlin, Andrew; Short, Kevin; Terzic, Andre; Jahangir, Arshad
2012-01-01
Objective Cardiac subsarcolemmal (SSM) and interfibrillar (IFM) mitochondrial subpopulations possess distinct biochemical properties and differ with respect to their protein and lipid compositions, capacities for respiration and protein synthesis, and sensitivity to metabolic challenge, yet their responsiveness to mitochondrially active cardioprotective therapeutics has not been characterized. This study assessed the differential responsiveness of the two mitochondrial subpopulations to diazoxide, a cardioprotective agent targeting mitochondria. Methods Mitochondrial subpopulations were freshly isolated from rat ventricles and their morphologies assessed by electron microscopy and enzymatic activities determined using standard biochemical protocols with a plate reader. Oxidative phosphorylation was assessed from State 3 respiration using succinate as a substrate. Calcium dynamics and the status of Ca2+-dependent mitochondrial permeability transition (MPT) pore and mitochondrial membrane potential were assessed using standard Ca2+ and TPP+ ion-selective electrodes. Results Compared to IFM, isolated SSM exhibited a higher sensitivity to Ca2+ overload-mediated inhibition of adenosine triphosphate (ATP) synthesis with decreased ATP production (from 375±25 to 83±15 nmol ATP/min/mg protein in SSM, and from 875±39 to 583±45 nmol ATP/min/mg protein in IFM). In addition, SSM exhibited reduced Ca2+-accumulating capacity as compared to IFM (230±13 vs. 450±46 nmol Ca2+/mg protein in SSM and IFM, respectively), suggestive of increased Ca2+ sensitivity of MPT pore opening. Despite enhanced susceptibility to stress, SSM were more responsive to the protective effect of diazoxide (100 μM) against Ca2+ overload-mediated inhibition of ATP synthesis (67% vs. 2% in SSM and IFM, respectively). Conclusion These results provide evidence for the distinct sensitivity of cardiac SSM and IFM toward Ca2+-dependent metabolic stress and the protective effect of diazoxide on mitochondrial energetics. PMID:22973464
Schwarzer, Michael; Schrepper, Andrea; Amorim, Paulo A; Osterholt, Moritz; Doenst, Torsten
2013-02-15
Years ago a debate arose as to whether two functionally different mitochondrial subpopulations, subsarcolemmal mitochondria (SSM) and interfibrillar mitochondria (IFM), exist in heart muscle. Nowadays potential differences are often ignored. Presumably, SSM are providing ATP for basic cell function, whereas IFM provide energy for the contractile apparatus. We speculated that two distinguishable subpopulations exist that are differentially affected by pressure overload. Male Sprague-Dawley rats were subjected to transverse aortic constriction for 20 wk or sham operation. Contractile function was assessed by echocardiography. Heart tissue was analyzed by electron microscopy. Mitochondria were isolated by differential centrifugation, and respiratory capacity was analyzed using a Clark electrode. Pressure overload induced left ventricular hypertrophy with increased posterior wall diameter and impaired contractile function. Mitochondrial state 3 respiration in control was 50% higher in IFM than in SSM. Pressure overload significantly impaired respiratory rates in both IFM and SSM, but in SSM to a lower extent. As a result, there were no differences between SSM and IFM after 20 wk of pressure overload. Pressure overload reduced total citrate synthase activity, suggesting reduced total mitochondrial content. Electron microscopy revealed normal morphology of mitochondria but reduced total mitochondrial volume density. In conclusion, IFM show greater respiratory capacity in the healthy rat heart and a greater depression of respiratory capacity by pressure overload than SSM. The differences in respiratory capacity of cardiac IFM and SSM in healthy hearts are eliminated with pressure overload-induced heart failure. The strong effect of pressure overload on IFM together with the simultaneous appearance of mitochondrial and contractile dysfunction may support the notion of IFM primarily producing ATP for contractile function.
3D active shape models of human brain structures: application to patient-specific mesh generation
NASA Astrophysics Data System (ADS)
Ravikumar, Nishant; Castro-Mateos, Isaac; Pozo, Jose M.; Frangi, Alejandro F.; Taylor, Zeike A.
2015-03-01
The use of biomechanics-based numerical simulations has attracted growing interest in recent years for computer-aided diagnosis and treatment planning. With this in mind, a method for automatic mesh generation of brain structures of interest, using statistical models of shape (SSM) and appearance (SAM), for personalised computational modelling is presented. SSMs are constructed as point distribution models (PDMs) while SAMs are trained using intensity profiles sampled from a training set of T1-weighted magnetic resonance images. The brain structures of interest are, the cortical surface (cerebrum, cerebellum & brainstem), lateral ventricles and falx-cerebri membrane. Two methods for establishing correspondences across the training set of shapes are investigated and compared (based on SSM quality): the Coherent Point Drift (CPD) point-set registration method and B-spline mesh-to-mesh registration method. The MNI-305 (Montreal Neurological Institute) average brain atlas is used to generate the template mesh, which is deformed and registered to each training case, to establish correspondence over the training set of shapes. 18 healthy patients' T1-weightedMRimages form the training set used to generate the SSM and SAM. Both model-training and model-fitting are performed over multiple brain structures simultaneously. Compactness and generalisation errors of the BSpline-SSM and CPD-SSM are evaluated and used to quantitatively compare the SSMs. Leave-one-out cross validation is used to evaluate SSM quality in terms of these measures. The mesh-based SSM is found to generalise better and is more compact, relative to the CPD-based SSM. Quality of the best-fit model instance from the trained SSMs, to test cases are evaluated using the Hausdorff distance (HD) and mean absolute surface distance (MASD) metrics.
NASA Sea Ice and Snow Validation Program for the DMSP SSM/I: NASA DC-8 flight report
NASA Technical Reports Server (NTRS)
Cavalieri, D. J.
1988-01-01
In June 1987 a new microwave sensor called the Special Sensor Microwave Imager (SSM/I) was launched as part of the Defense Meteorological Satellite Program (DMSP). In recognition of the importance of this sensor to the polar research community, NASA developed a program to acquire the data, to convert the data into sea ice parameters, and finally to validate and archive both the SSM/I radiances and the derived sea ice parameters. Central to NASA's sea ice validation program was a series of SSM/I aircraft underflights with the NASA DC-8 airborne Laboratory. The mission (the Arctic '88 Sea Ice Mission) was completed in March 1988. This report summarizes the mission and includes a summary of aircraft instrumentation, coordination with participating Navy aircraft, flight objectives, flight plans, data collected, SSM/I orbits for each day during the mission, and lists several piggyback experiments supported during this mission.
Same-sex marriage: a new social phenomenon.
Chamie, Joseph; Mirkin, Barry
2011-01-01
Same-sex marriage (SSM) is a new social phenomenon. In modern times SSM did not exist until the 21st century when an increasing number of countries began permitting same-sex couples to marry legally. This study presents statistical and related evidence concerning SSM worldwide, with special attention to the United States, where SSM has evolved into a major political and legal issue. In addition to examining data on levels and trends, differentials between men and women are investigated. The study also considers common arguments for and against SSM and likely changes in laws and policies that may occur. Although same-sex marriage now exists in a small number of countries and US states, its consequences and implications are being felt far beyond the borders of those countries and areas. In coming years same-sex marriage will remain a controversial and salient part of the legal, political, and cultural landscape, locally, nationally, and internationally.
NASA Technical Reports Server (NTRS)
Steffen, K.; Schweiger, A. J.
1990-01-01
The validation of sea ice products derived from the Special Sensor Microwave Imager (SSM/I) on board a DMSP platform is examined using data from the Landsat MSS and NOAA-AVHRR sensors. Image processing techniques for retrieving ice concentrations from each type of imagery are developed and results are intercompared to determine the ice parameter retrieval accuracy of the SSM/I NASA-Team algorithm. For case studies in the Beaufort Sea and East Greenland Sea, average retrieval errors of the SSM/I algorithm are between 1.7 percent for spring conditions and 4.3 percent during freeze up in comparison with Landsat derived ice concentrations. For a case study in the East Greenland Sea, SSM/I derived ice concentration in comparison with AVHRR imagery display a mean error of 9.6 percent.
NASA Astrophysics Data System (ADS)
Trinh, Thuat T.; Meling, Nora; Bedeaux, Dick; Kjelstrup, Signe
2017-03-01
We present thermodynamic properties of the H2 dissociation reaction by means of the Small System Method (SSM) using Reactive Force Field (ReaxFF) simulations. Thermodynamic correction factors, partial molar enthalpies and heat capacities of the reactant and product were obtained in the high temperature range; up to 30,000 K. The results obtained from the ReaxFF potential agree well with previous results obtained with a three body potential (TBP). This indicates that the popular reactive force field method can be combined well with the newly developed SSM in realistic simulations of chemical reactions. The approach may be useful in the study of heat and mass transport in combination with chemical reactions.
Smith, Justin S; Singh, Manish; Klineberg, Eric; Shaffrey, Christopher I; Lafage, Virginie; Schwab, Frank J; Protopsaltis, Themistocles; Ibrahimi, David; Scheer, Justin K; Mundis, Gregory; Gupta, Munish C; Hostin, Richard; Deviren, Vedat; Kebaish, Khaled; Hart, Robert; Burton, Douglas C; Bess, Shay; Ames, Christopher P
2014-08-01
Increased sagittal vertical axis (SVA) correlates strongly with pain and disability for adults with spinal deformity. A subset of patients with sagittal spinopelvic malalignment (SSM) have flatback deformity (pelvic incidence-lumbar lordosis [PI-LL] mismatch > 10°) but remain sagittally compensated with normal SVA. Few data exist for SSM patients with flatback deformity and normal SVA. The authors' objective was to compare baseline disability and treatment outcomes for patients with compensated (SVA < 5 cm and PI-LL mismatch > 10°) and decompensated (SVA > 5 cm) SSM. The study was a multicenter, prospective analysis of adults with spinal deformity who consecutively underwent surgical treatment for SSM. Inclusion criteria included age older than 18 years, presence of adult spinal deformity with SSM, plan for surgical treatment, and minimum 1-year follow-up data. Patients with SSM were divided into 2 groups: those with compensated SSM (SVA < 5 cm and PI-LL mismatch > 10°) and those with decompensated SSM (SVA ≥ 5 cm). Baseline and 1-year follow-up radiographic and health-related quality of life (HRQOL) outcomes included Oswestry Disability Index, Short Form-36 scores, and Scoliosis Research Society-22 scores. Percentages of patients achieving minimal clinically important difference (MCID) were also assessed. A total of 125 patients (27 compensated and 98 decompensated) met inclusion criteria. Compared with patients in the compensated group, patients in the decompensated group were older (62.9 vs. 55.1 years; p = 0.004) and had less scoliosis (43° vs 54°; p = 0.002), greater SVA (12.0 cm vs. 1.7 cm; p < 0.001), greater PI-LL mismatch (26° vs. 20°; p = 0.013), and poorer HRQOL scores (Oswestry Disability Index, Short Form-36 physical component score, Scoliosis Research Society-22 total; p ≤ 0.016). Although these baseline HRQOL differences between the groups reached statistical significance, only the mean difference in Short Form-36 physical component score reached threshold for MCID. Compared with baseline assessment, at 1 year after surgery improvement was noted for patients in both groups for mean SVA (compensated -1.1 cm, decompensated +4.8 cm; p ≤ 0.009), mean PI-LL mismatch (compensated 6°, decompensated 5°; p < 0.001), and all HRQOL measures assessed (p ≤ 0.005). No significant differences were found between the compensated and decompensated groups in the magnitude of HRQOL score improvement or in the percentages of patients achieving MCID for each of the outcome measures assessed. Decompensated SSM patients with elevated SVA experience significant disability; however, the amount of disability in compensated SSM patients with flatback deformity caused by PI-LL mismatch but normal SVA is underappreciated. Surgical correction of SSM demonstrated similar radiographic and HRQOL score improvements for patients in both groups. Evaluation of SSM should extend beyond measuring SVA. Among patients with concordant pain and disability, PI-LL mismatch must be evaluated for SSM patients and can be considered a primary indication for surgery.
NASA Technical Reports Server (NTRS)
Smith, Eric A.
2004-01-01
This study presents results from a multi-satellite/multi-sensor retrieval system designed to obtain the atmospheric water budget over the open ocean. A combination of 3ourly-sampled monthly datasets derived from the GOES-8 5-channel Imager, the TRMM TMI radiometer, and the DMSP 7-channel passive microwave radiometers (SSM/I) have been acquired for the combined Gulf of Mexico-Caribbean Sea basin. Whereas the methodology has been tested over this basin, the retrieval system is designed for portability to any open-ocean region. Algorithm modules using the different datasets to retrieve individual geophysical parameters needed in the water budget equation are designed in a manner that takes advantage of the high temporal resolution of the GOES-8 measurements, as well as the physical relationships inherent to the TRMM and SSM/I passive microwave measurements in conjunction with water vapor, cloud liquid water, and rainfall. The methodology consists of retrieving the precipitation, surface evaporation, and vapor-cloud water storage terms in the atmospheric water balance equation from satellite techniques, with the water vapor advection term being obtained as the residue needed for balance. Thus, the intent is to develop a purely satellite-based method for obtaining the full set of terms in the atmospheric water budget equation without requiring in situ sounding information on the wind profile. The algorithm is validated by cross-checking all the algorithm components through multiple- algorithm retrieval intercomparisons. A further check on the validation is obtained by directly comparing water vapor transports into the targeted basin diagnosed from the satellite algorithms to those obtained observationally from a network of land-based upper air stations that nearly uniformly surround the basin, although it is fair to say that these checks are more effective m identifying problems in estimating vapor transports from a leaky operational radiosonde network than in verifying the transport estimates determined from the satellite algorithm system Total columnar atmospheric water budget results are presented for an extended annual cycle consisting of the months of October-97, January-98, April-98, July-98,October-98, and January 1999. These results are used to emphasize the changing relationship in E-P, as well as in the varying roles of storage and advection in balancing E-P both on daily and monthly time scales and on localized and basin space scales. Results from the algorithm-to-algorithm intercomparisons are also presented in the context of sensitivity testing to help understand the intrinsic uncertainties in evaluating the water budget terms by an all-satellite algorithm approach.
Code of Federal Regulations, 2011 CFR
2011-07-01
... emission limitations of this subpart apply during periods of SSM, except as provided in paragraphs (b)(2) and (3) of this section. However, if a SSM, or period of nonoperation of one portion of the affected... or utilized for achieving compliance with this subpart during periods of SSM while emissions are...
49 CFR 222.55 - How are new supplementary or alternative safety measures approved?
Code of Federal Regulations, 2011 CFR
2011-10-01
... applicant; (2) A description and design of the proposed new SSM or ASM; (3) A description and results of the... SSM or ASM; and (5) Any other information deemed necessary. (e) If the Associate Administrator is... locomotive horn, the Associate Administrator will approve its use as an SSM to be used in the same manner as...
40 CFR Table 6 to Subpart Nnnnn of... - Requirements for Reports
Code of Federal Regulations, 2014 CFR
2014-07-01
... malfunction (SSM) reports according to the requirements in § 63.9050(f) and the following: If... Then you must... information in § 63.9050(d). 5. There was a SSM during the reporting period that is not consistent with your SSM plan Contains the information in § 63.9050(f). 6. There were periods when the procedures in the...
Code of Federal Regulations, 2012 CFR
2012-07-01
.... The emission limitations of this subpart apply during periods of SSM, except as provided in paragraphs (b)(2) and (3) of this section. However, if a SSM, or period of nonoperation of one portion of the... or utilized for achieving compliance with this subpart during periods of SSM while emissions are...
40 CFR Table 6 to Subpart Nnnnn of... - Requirements for Reports
Code of Federal Regulations, 2013 CFR
2013-07-01
... malfunction (SSM) reports according to the requirements in § 63.9050(f) and the following: If... Then you must... information in § 63.9050(d). 5. There was a SSM during the reporting period that is not consistent with your SSM plan Contains the information in § 63.9050(f). 6. There were periods when the procedures in the...
40 CFR 63.1960 - How is compliance determined?
Code of Federal Regulations, 2011 CFR
2011-07-01
... requirements of this subpart. Finally, you must develop a written SSM plan according to the provisions in 40 CFR 63.6(e)(3). A copy of the SSM plan must be maintained on site. Failure to write or maintain a copy of the SSM plan is a deviation from the requirements of this subpart. [68 FR 2238, Jan. 16, 2003, as...
40 CFR Table 6 to Subpart Nnnnn of... - Requirements for Reports
Code of Federal Regulations, 2011 CFR
2011-07-01
... malfunction (SSM) reports according to the requirements in § 63.9050(f) and the following: If... Then you must... information in § 63.9050(d). 5. There was a SSM during the reporting period that is not consistent with your SSM plan Contains the information in § 63.9050(f). 6. There were periods when the procedures in the...
49 CFR 222.55 - How are new supplementary or alternative safety measures approved?
Code of Federal Regulations, 2012 CFR
2012-10-01
... applicant; (2) A description and design of the proposed new SSM or ASM; (3) A description and results of the... SSM or ASM; and (5) Any other information deemed necessary. (e) If the Associate Administrator is... locomotive horn, the Associate Administrator will approve its use as an SSM to be used in the same manner as...
40 CFR 63.2870 - What parts of the General Provisions apply to me?
Code of Federal Regulations, 2010 CFR
2010-07-01
... emissions to the extent practical § 63.6(e)(3)(iv) Operation and maintenance requirements No Report SSM and... Yes Except, report each revision to your SSM plan in accordance with § 63.2861(c) rather than § 63.10...) Compliance with nonopacity emission standards except during SSM Comply with emission standards at all times...
40 CFR Table 6 to Subpart Nnnnn of... - Requirements for Reports
Code of Federal Regulations, 2012 CFR
2012-07-01
... malfunction (SSM) reports according to the requirements in § 63.9050(f) and the following: If... Then you must... information in § 63.9050(d). 5. There was a SSM during the reporting period that is not consistent with your SSM plan Contains the information in § 63.9050(f). 6. There were periods when the procedures in the...
Code of Federal Regulations, 2014 CFR
2014-07-01
.... The emission limitations of this subpart apply during periods of SSM, except as provided in paragraphs (b)(2) and (3) of this section. However, if a SSM, or period of nonoperation of one portion of the... or utilized for achieving compliance with this subpart during periods of SSM while emissions are...
40 CFR 63.2870 - What parts of the General Provisions apply to me?
Code of Federal Regulations, 2011 CFR
2011-07-01
... emissions to the extent practical § 63.6(e)(3)(iv) Operation and maintenance requirements No Report SSM and... Yes Except, report each revision to your SSM plan in accordance with § 63.2861(c) rather than § 63.10...) Compliance with nonopacity emission standards except during SSM Comply with emission standards at all times...
Code of Federal Regulations, 2013 CFR
2013-07-01
.... The emission limitations of this subpart apply during periods of SSM, except as provided in paragraphs (b)(2) and (3) of this section. However, if a SSM, or period of nonoperation of one portion of the... or utilized for achieving compliance with this subpart during periods of SSM while emissions are...
49 CFR 222.55 - How are new supplementary or alternative safety measures approved?
Code of Federal Regulations, 2014 CFR
2014-10-01
... applicant; (2) A description and design of the proposed new SSM or ASM; (3) A description and results of the... SSM or ASM; and (5) Any other information deemed necessary. (e) If the Associate Administrator is... locomotive horn, the Associate Administrator will approve its use as an SSM to be used in the same manner as...
49 CFR 222.55 - How are new supplementary or alternative safety measures approved?
Code of Federal Regulations, 2013 CFR
2013-10-01
... applicant; (2) A description and design of the proposed new SSM or ASM; (3) A description and results of the... SSM or ASM; and (5) Any other information deemed necessary. (e) If the Associate Administrator is... locomotive horn, the Associate Administrator will approve its use as an SSM to be used in the same manner as...
40 CFR Table 6 to Subpart Nnnnn of... - Requirements for Reports
Code of Federal Regulations, 2010 CFR
2010-07-01
... malfunction (SSM) reports according to the requirements in § 63.9050(f) and the following: If... Then you must... information in § 63.9050(d). 5. There was a SSM during the reporting period that is not consistent with your SSM plan Contains the information in § 63.9050(f). 6. There were periods when the procedures in the...
40 CFR 63.1960 - How is compliance determined?
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements of this subpart. Finally, you must develop a written SSM plan according to the provisions in 40 CFR 63.6(e)(3). A copy of the SSM plan must be maintained on site. Failure to write or maintain a copy of the SSM plan is a deviation from the requirements of this subpart. [68 FR 2238, Jan. 16, 2003, as...
Early In-orbit Performance of Scanning Sky Monitor Onboard AstroSat
NASA Astrophysics Data System (ADS)
Ramadevi, M. C.; Ravishankar, B. T.; Sitaramamurthy, N.; Meena, G.; Singh, Brajpal; Jain, Anand; Yadav, Reena; Agarwal, Anil; Babu, V. Chandra; Kumar; Kushwaha, Ankur; Vaishali, S.; Iyer, Nirmal Kumar; Nandi, Anuj; Girish, V.; Agarwal, Vivek Kumar; Seetha, S.; Bhattacharya, Dipankar; Balaji, K.; Kumar, Manoj; Kulshresta, Prashanth
2017-06-01
We report the in-orbit performance of Scanning Sky Monitor (SSM) onboard AstroSat. The SSM operates in the energy range 2.5 to 10 keV and scans the sky to detect and locate transient X-ray sources. This information of any interesting phenomenon in the X-ray sky as observed by SSM is provided to the astronomical community for follow-up observations. Following the launch of AstroSat on 28th September, 2015, SSM was commissioned on October 12th, 2015. The first power ON of the instrument was with the standard X-ray source, Crab in the field-of-view. The first orbit data revealed the basic expected performance of one of the detectors of SSM, SSM1. Following this in the subsequent orbits, the other detectors were also powered ON to find them perform in good health. Quick checks of the data from the first few orbits revealed that the instrument performed with the expected angular resolution of 12' × 2.5° and effective area in the energy range of interest. This paper discusses the instrument aspects along with few on-board results immediately after power ON.
Constrained exceptional supersymmetric standard model
DOE Office of Scientific and Technical Information (OSTI.GOV)
Athron, P.; King, S. F.; Miller, D. J.
2009-08-01
We propose and study a constrained version of the exceptional supersymmetric standard model (E{sub 6}SSM), which we call the cE{sub 6}SSM, based on a universal high energy scalar mass m{sub 0}, trilinear scalar coupling A{sub 0} and gaugino mass M{sub 1/2}. We derive the renormalization group (RG) Equations for the cE{sub 6}SSM, including the extra U(1){sub N} gauge factor and the low-energy matter content involving three 27 representations of E{sub 6}. We perform a numerical RG analysis for the cE{sub 6}SSM, imposing the usual low-energy experimental constraints and successful electroweak symmetry breaking. Our analysis reveals that the sparticle spectrum ofmore » the cE{sub 6}SSM involves a light gluino, two light neutralinos, and a light chargino. Furthermore, although the squarks, sleptons, and Z{sup '} boson are typically heavy, the exotic quarks and squarks can also be relatively light. We finally specify a set of benchmark points, which correspond to particle spectra, production modes, and decay patterns peculiar to the cE{sub 6}SSM, altogether leading to spectacular new physics signals at the Large Hadron Collider.« less
A 7.5-Year Dataset of SSM/I-Derived Surface Turbulent Fluxes Over Global Oceans
NASA Technical Reports Server (NTRS)
Chou, Shu-Hsien; Shie, Chung-Lin; Atlas, Robert M.; Ardizzone, Joe; Nelkin, Eric; Einaudi, Franco (Technical Monitor)
2001-01-01
The surface turbulent fluxes of momentum, latent heat, and sensible heat over global oceans are essential to weather, climate and ocean problems. Wind stress is the major forcing for driving the oceanic circulation, while Evaporation is a key component of hydrological cycle and surface heat budget. We have produced a 7.5-year (July 1987-December 1994) dataset of daily, individual monthly-mean and climatological (1988-94) monthly-mean surface turbulent fluxes over the global oceans from measurements of the Special Sensor Microwave/Imager (SSM/I) on board the US Defense Meteorological Satellite Program F8, F10, and F11 satellites. It has a spatial resolution of 2.0x2.5 latitude-longitude. Daily turbulent fluxes are derived from daily data of SSM/I surface winds and specific humidity, National Centers for Environmental Prediction (NCEP) sea surface temperatures, and European Centre for Medium-Range Weather Forecasts (ECMWF) air-sea temperature differences, using a stability-dependent bulk scheme. The retrieved instantaneous surface air humidity (with a 25-km resolution) IS found to be generally accurate as compared to the collocated radiosonde observations over global oceans. The surface wind speed and specific humidity (latent heat flux) derived from the F10 SSM/I are found to be -encrally smaller (larger) than those retrieved from the F11 SSM/I. The F11 SSM/I appears to have slightly better retrieval accuracy for surface wind speed and humidity as compared to the F10 SSM/I. This difference may be due to the orbital drift of the F10 satellite. The daily wind stresses and latent heat fluxes retrieved from F10 and F11 SSM/Is show useful accuracy as verified against the research quality in si -neasurerrients (IMET buoy, RV Moana Wave, and RV Wecoma) in the western Pacific warm pool during the TOGA COARE Intensive observing period (November 1992-February 1993). The 1988-94 seasonal-mean turbulent fluxes and input variables derived from FS and F11 SSM/Is show reasonable patterns related to seasonal variations of atmospheric general circulation. This dataset of SSM/I-derived turbulent fluxes is useful for climate studies, forcing of ocean models, and validation of coupled ocean-atmosphere global models and can be accessed through the NASA/GSFC Distributed Active Archive Center.
Assessment of Surface Water Storage trends for increasing groundwater areas in India
NASA Astrophysics Data System (ADS)
Banerjee, Chandan; Kumar, D. Nagesh
2018-07-01
Recent studies based on Gravity Recovery and Climate Experiment (GRACE) satellite mission suggested that groundwater has increased in central and southern parts of India. However, surface water, which is an equally important source of water in these semi-arid areas has not been studied yet. In the present study, the study areas were outlined based on trends in GRACE data followed by trend identification in surface water storages and checking the hypothesis of causality. Surface Water Extent (SWE) and Surface Soil Moisture (SSM) derived from Moderate-resolution Imaging Spectroradiometer (MODIS) and Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E) respectively, are selected as proxies of surface water storage (SWS). Besides SWE and SSM, trend test was performed for GRACE derived terrestrial water storage (TWS) for the study areas named as R1, R2, GOR1 and KOR1. Granger-causality test is used to test the hypothesis that rainfall is a causal factor of the inter-annual variability of SWE, SSM and TWS. Positive trends were observed in TWS for R1, R2 and GOR1 whereas SWE and SSM show increasing trends for all the study regions. Results suggest that rainfall is the granger-causal of all the storage variables for R1 and R2, the regions exhibiting the most significant positive trends in TWS.
Seasonal comparisons of sea ice concentration estimates derived from SSM/I, OKEAN, and RADARSAT data
Belchansky, Gennady I.; Douglas, David C.
2002-01-01
The Special Sensor Microwave Imager (SSM/I) microwave satellite radiometer and its predecessor SMMR are primary sources of information for global sea ice and climate studies. However, comparisons of SSM/I, Landsat, AVHRR, and ERS-1 synthetic aperture radar (SAR) have shown substantial seasonal and regional differences in their estimates of sea ice concentration. To evaluate these differences, we compared SSM/I estimates of sea ice coverage derived with the NASA Team and Bootstrap algorithms to estimates made using RADARSAT, and OKEAN-01 satellite sensor data. The study area included the Barents Sea, Kara Sea, Laptev Sea, and adjacent parts of the Arctic Ocean, during October 1995 through October 1999. Ice concentration estimates from spatially and temporally near-coincident imagery were calculated using independent algorithms for each sensor type. The OKEAN algorithm implemented the satellite's two-channel active (radar) and passive microwave data in a linear mixture model based on the measured values of brightness temperature and radar backscatter. The RADARSAT algorithm utilized a segmentation approach of the measured radar backscatter, and the SSM/I ice concentrations were derived at National Snow and Ice Data Center (NSIDC) using the NASA Team and Bootstrap algorithms. Seasonal and monthly differences between SSM/I, OKEAN, and RADARSAT ice concentrations were calculated and compared. Overall, total sea ice concentration estimates derived independently from near-coincident RADARSAT, OKEAN-01, and SSM/I satellite imagery demonstrated mean differences of less than 5.5% (S.D.<9.5%) during the winter period. Differences between the SSM/I NASA Team and the SSM/I Bootstrap concentrations were no more than 3.1% (S.D.<5.4%) during this period. RADARSAT and OKEAN-01 data both yielded higher total ice concentrations than the NASA Team and the Bootstrap algorithms. The Bootstrap algorithm yielded higher total ice concentrations than the NASA Team algorithm. Total ice concentrations derived from OKEAN-01 and SSM/I satellite imagery were highly correlated during winter, spring, and fall, with mean differences of less than 8.1% (S.D.<15%) for the NASA Team algorithm, and less than 2.8% (S.D.<13.8%) for the Bootstrap algorithm. Respective differences between SSM/I NASA Team and SSM/I Bootstrap total concentrations were less than 5.3% (S.D.<6.9%). Monthly mean differences between SSM/I and OKEAN differed annually by less than 6%, with smaller differences primarily in winter. The NASA Team and Bootstrap algorithms underestimated the total sea ice concentrations relative to the RADARSAT ScanSAR no more than 3.0% (S.D.<9%) and 1.2% (S.D.<7.5%) during cold months, and no more than 12% and 7% during summer, respectively. ScanSAR tended to estimate higher ice concentrations for ice concentrations greater than 50%, when compared to SSM/I during all months. ScanSAR underestimated total sea ice concentration by 2% compared to the OKEAN-01 algorithm during cold months, and gave an overestimation by 2% during spring and summer months. Total NASA Team and Bootstrap sea ice concentration estimates derived from coincident SSM/I and OKEAN-01 data demonstrated mean differences of no more than 5.3% (S.D.<7%), 3.1% (S.D.<5.5%), 2.0% (S.D.<5.5%), and 7.3% (S.D.<10%) for fall, winter, spring, and summer periods, respectively. Large disagreements were observed between the OKEAN and NASA Team results in spring and summer for estimates of the first-year (FY) and multiyear (MY) age classes. The OKEAN-01 algorithm and data tended to estimate, on average, lower concentrations of young or FY ice and higher concentrations of total and MY ice for all months and seasons. Our results contribute to the growing body of documentation about the levels of disparity obtained when seasonal sea ice concentrations are estimated using various types of satellite data and algorithms.
40 CFR Table 10 to Subpart Hhhhh... - Applicability of General Provisions to Subpart HHHHH
Code of Federal Regulations, 2010 CFR
2010-07-01
...) Recordkeeping and Reporting During Startup, Shutdown, and Malfunction (SSM) No, §§ 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and § 63.8075(e)(5... SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Yes. § 63.6(g)(1)-(3) Alternative...
40 CFR Table 10 to Subpart Hhhhh... - Applicability of General Provisions to Subpart HHHHH
Code of Federal Regulations, 2014 CFR
2014-07-01
...) Recordkeeping and Reporting During Startup, Shutdown, and Malfunction (SSM) No, §§ 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and § 63.8075(e)(5... SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Yes. § 63.6(g)(1)-(3) Alternative...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-17
... CFR Part 63 relating to exemptions for startup, shutdown, and malfunction (SSM). On October 16, 2009, the Court issued the mandate vacating these SSM exemption provisions, which are found at 40 CFR 63.6(f... allows sources the SSM exemption as provided for in the vacated provisions at 40 CFR 63.6(f)(1) and (h)(1...
40 CFR Table 10 to Subpart Hhhhh... - Applicability of General Provisions to Subpart HHHHH
Code of Federal Regulations, 2012 CFR
2012-07-01
...) Recordkeeping and Reporting During Startup, Shutdown, and Malfunction (SSM) No, §§ 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and § 63.8075(e)(5... SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Yes. § 63.6(g)(1)-(3) Alternative...
40 CFR Table 10 to Subpart Hhhhh... - Applicability of General Provisions to Subpart HHHHH
Code of Federal Regulations, 2013 CFR
2013-07-01
...) Recordkeeping and Reporting During Startup, Shutdown, and Malfunction (SSM) No, §§ 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and § 63.8075(e)(5... SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Yes. § 63.6(g)(1)-(3) Alternative...
40 CFR Table 10 to Subpart Hhhhh... - Applicability of General Provisions to Subpart HHHHH
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Recordkeeping and Reporting During Startup, Shutdown, and Malfunction (SSM) No, §§ 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and § 63.8075(e)(5... SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Yes. § 63.6(g)(1)-(3) Alternative...
SSM on AstroSat detects neutron star X-ray transient, Aql_X-1 in its outburst
NASA Astrophysics Data System (ADS)
Ramadevi, M. C.; Ravishankar, B. T.; Sarwade, Abhilash R.; Vaishali, S.; Hasan, Mohammed; Agarwal, Vivek Kumar; Baby, Blessy Elizabeth; Bhattacharya, Dipankar; Seetha, S.; Agarwal, Anil
2017-06-01
We report on the X-ray outburst of the neutron star X-ray source Aql X-1 as observed by SSM onboard AstroSat. Flux reported by SSM on its first observation of the source during this outburst on 01 June 2017 at 08:55 UT is about 820 milliCrab (2.24 +/- 0.02 photons/s-cm^2).
The DMSP Space Weather Sensors Data Archive Listing (1982-2013) and File Formats Descriptions
2014-08-01
environment sensors including the auroral particle spectrometer (SSJ), the fluxgate magnetometer (SSM), the topside thermal plasma monitor (SSIES... Fluxgate Magnetometer (SSM) for the Defense Meteorological Satellite Program (DMSP) Block 5D-2, Flight 7, Instrument Papers, AFGL-TR-84-0225; ADA155229...Flux) SSM The fluxgate magnetometer . (Special Sensor, Magnetometer ) SSULI The ultraviolet limb imager SSUSI The ultraviolet spectrographic imager
Estrogen regulates spatially distinct cardiac mitochondrial subpopulations.
Ribeiro Junior, Rogério Faustino; Rodrigues, Paula Lopes; Morra, Elis Aguiar; Ronconi, Karoline Sousa; Do Val Lima, Patrícia Ribeiro; Porto, Marcella Leite; Simões, Maylla Ronacher; Vassallo, Dalton Valentim; Figueiredo, Suely Gomes; Stefanon, Ivanita
2017-07-01
Increased susceptibility to permeability transition pore (mPTP) is a significant concern to decreased cardiac performance in postmenopausal females. The goal of this study was to assess the effects of estrogen deficiency on the two spatially distinct mitochondrial subpopulations from left ventricle: subsarcolemmal mitochondria (SSM) and intermyofibrillar mitochondria (IFM) based on: morphology, membrane potential, oxidative phosphorylation, mPTP and reactive oxygen species production. Female rats (8weeks old) that underwent bilateral ovariectomy were randomly assigned to receive daily treatment with placebo (OVX), estrogen replacement (OVX+E2) and Sham for 60days. The yield for IFM was found higher in the OVX group and lower in the SSM. SSM internal complexity and size were higher in the OVX group, although membrane potential was not different. The maximal rate of mitochondrial respiration, states 3 and 4, using glutamate+malate as substrate, were higher in IFM and SSM from the OVX group. The respiratory control ratio (RCR - state3/state 4), was not different in both SSM and IFM with glutamate+malate. The ADP:O ratio was found lower in IFM and SSM from OVX compared to Sham. When pyruvate was used, state 3 was found unchanged in both IFM and SSM, state 4 was greater in IFM from OVX rats compared to Sham and the ADP/O ratio was decreased. The RCR was unchanged in both subpopulations. The IFM from OVX rats presented a lower Ca 2+ retention capacity compared to Sham, however, the SSM remained unchanged. Hydrogen peroxide formation was found increased in the IFM from OVX animals with glutamate+malate and rotenone+succinate as substrates. The SSM showed increased ROS production only with rotenone+succinate. Western blot analyzes showed decreased levels of PGC-1α and NRF-1 in the OVX group. Estrogen replacement was able to restore most of the alterations induced by ovariectomy. In conclusion, our data shows that estrogen deficiency has distinct effects on the two spatially distinct mitochondrial subpopulations in oxidative phosphorylation, morphology, calcium retention capacity and ROS production. Copyright © 2017 Elsevier B.V. and Mitochondria Research Society. All rights reserved.
Nipple skin-sparing mastectomy is feasible for advanced disease.
Burdge, Eric C; Yuen, James; Hardee, Matthew; Gadgil, Pranjali V; Das, Chandan; Henry-Tillman, Ronda; Ochoa, Daniela; Korourian, Soheila; Suzanne Klimberg, V
2013-10-01
Skin-sparing mastectomy (SSM) or nipple skin-sparing mastectomy (NSSM) are procedures commonly offered as part of the surgical treatment for breast cancer. Each involves a mastectomy with preservation of the skin overlying the breast (in SSM) and often also the skin overlying the nipple-areolar complex (NSSM). At the time of mastectomy, immediate reconstruction with a tissue expander or implant is performed for a more favorable cosmetic outcome. Until now, these procedures have been reserved for low-risk patients and are rarely offered to patients with advanced disease where neoadjuvant chemotherapy and postmastectomy radiation are a planned part of the treatment. We report our experience of SSM and NSSM in such high-risk patients. This retrospective study from 2001 to 2012 evaluates the outcomes of 527 patients who underwent SSM or NSSM. Sixty patients with advanced disease who underwent neoadjuvant chemotherapy followed by SSM or NSSM with immediate reconstruction and subsequent radiotherapy (RT) were identified. The cosmetic and oncologic outcomes of this patient group were noted. A total of 527 patients in our study group had a total of 1,035 skin-sparing mastectomies (558 NSSM and 477 SSM; 444 patients with bilateral and 83 with unilateral procedures). Of the 60 patients with locally advanced disease, 39 underwent NSSM and 21 underwent SSM. All patients received RT to the diseased side. Mean age of the group was 50.2 ± 10.8 years, with a range of 27-75 years for NSSM and 29-73 years for SSM. The lymph node status was positive in 71.8 % with an average tumor size of 3.8 ± 2.5 cm. The overall radiation-induced complication rate was 38.1 % (8 of 21) in the SSM group and 30.8 % (12 of 39) in the NSSM group. Wound infections and tissue necrosis occurred at a rate of 16.7 %. The implant was removed in 5 % of these cases. Capsular contracture occurred at a rate of 10.2 %. Radiation-related nonbreast complications occurred in 6.7 % of the cases. Examples of these radiation-related nonbreast complications included radiation pneumonitis, stenosis of the superior vena cava requiring venoplasty and severe atypical chest pain thought to be consistent with osteochondritis. The locoregional recurrence rate (median follow-up of 18 months) was 14.3 % (3 of 21) in the SSM group and 10.3 % (4 of 39) in the NSSM group. SSM and NSSM have been offered to patients with relatively low-risk breast cancer as oncologically safe while affording superior cosmesis with one-step immediate reconstruction. Our series demonstrates that either procedure can be offered to patients with more advanced cancers requiring postoperative RT. The complication rates are comparable to those reported for patients undergoing RT after traditional mastectomies.
MICELLAR NANOMEDICINE OF HUMAN NEUROPEPTIDE Y
Kuzmis, Antonina; Lim, Sok Bee; Desai, Esha; Jeon, Eunjung; Lee, Bao-Shiang; Rubinstein, Israel; Önyüksel, Hayat
2011-01-01
Human neuropeptide Y (NPY) is an important biologics that regulates multitude of physiological functions and could be amenable to therapeutic manipulations in certain disease states. However, rapid (minutes) enzymatic degradation and inactivation of NPY precludes its development as a drug. Accordingly, we determined whether self-association of NPY with biocompatible and biodegradable sterically stabilized phospholipid micelles (SSM) improves its stability and bioactivity. We found that in saline NPY spontaneously aggregates whereas in the presence of SSM it self-associates with the micelles as monomers. Three NPY molecules self-associate with one SSM at saturation. This process stabilizes the peptide in α-helix conformation, abrogates its degradation by dipeptidyl peptidase-4 and potentiates NPY-induced inhibition of cAMP elaboration in SK-N-MC cells. Collectively, these data indicate that self-association of NPY with SSM stabilizes and protects the peptide in active monomeric conformation, thereby amplifying its bioactivity in vitro. We propose further development of NPY in SSM as a novel, long-acting nanomedicine. PMID:21272667
40 CFR Table 12 to Subpart Ffff of... - Applicability of General Provisions to Subpart FFFF
Code of Federal Regulations, 2011 CFR
2011-07-01
...(j). § 63.6(e)(3)(iii) and (iv) Recordkeeping and Reporting During SSM No, § 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and § 63.2520(e)(4...) Compliance Except During SSM Yes. § 63.6(f)(2)-(3) Methods for Determining Compliance Yes. § 63.6(g)(1)-(3...
Code of Federal Regulations, 2013 CFR
2013-07-01
... with the standard must complete SSMP. § 63.6(f)(1) Compliance Except During SSM Yes Applies only to....4730 and 63.4731. § 63.10(b)(2)(i)-(v) Recordkeeping Relevant to SSM Periods and CMS Yes Requirements for SSM records only apply to add-on control devices used to comply with the standard. § 63.10(b)(2...
Code of Federal Regulations, 2014 CFR
2014-07-01
... with the standard must complete SSMP. § 63.6(f)(1) Compliance Except During SSM Yes Applies only to....4730 and 63.4731. § 63.10(b)(2)(i)-(v) Recordkeeping Relevant to SSM Periods and CMS Yes Requirements for SSM records only apply to add-on control devices used to comply with the standard. § 63.10(b)(2...
Code of Federal Regulations, 2012 CFR
2012-07-01
... with the standard must complete SSMP. § 63.6(f)(1) Compliance Except During SSM Yes Applies only to....4730 and 63.4731. § 63.10(b)(2)(i)-(v) Recordkeeping Relevant to SSM Periods and CMS Yes Requirements for SSM records only apply to add-on control devices used to comply with the standard. § 63.10(b)(2...
Leptogenesis in the E{sub 6}SSM: Flavour Dependent Lepton Asymmetries
DOE Office of Scientific and Technical Information (OSTI.GOV)
King, S. F.; Luo, R.; Miller, D. J.
2008-11-23
We discuss flavour dependent lepton asymmetries in the Exceptional Supersymmetric Standard Model (E{sub 6}SSM). In the E{sub 6}SSM, the right-handed neutrinos do not participate in gauge interactions, and they decay into leptons and leptoquarks. Their Majorana nature allows violation of lepton number. New particles and interactions can result in substantial lepton asymmetries, even for scales as low as 10{sup 6} GeV.
Code of Federal Regulations, 2011 CFR
2011-07-01
... with the standard must complete SSMP. § 63.6(f)(1) Compliance Except During SSM Yes Applies only to....4730 and 63.4731. § 63.10(b)(2)(i)-(v) Recordkeeping Relevant to SSM Periods and CMS Yes Requirements for SSM records only apply to add-on control devices used to comply with the standard. § 63.10(b)(2...
40 CFR Table 12 to Subpart Ffff of... - Applicability of General Provisions to Subpart FFFF
Code of Federal Regulations, 2014 CFR
2014-07-01
... specified in § 63.2525(j). § 63.6(e)(3)(iii) and (iv) Recordkeeping and Reporting During SSM No, § 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and... permit Yes. § 63.6(f)(1) Compliance Except During SSM Yes. § 63.6(f)(2)-(3) Methods for Determining...
40 CFR Table 12 to Subpart Ffff of... - Applicability of General Provisions to Subpart FFFF
Code of Federal Regulations, 2012 CFR
2012-07-01
... specified in § 63.2525(j). § 63.6(e)(3)(iii) and (iv) Recordkeeping and Reporting During SSM No, § 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and... permit Yes. § 63.6(f)(1) Compliance Except During SSM Yes. § 63.6(f)(2)-(3) Methods for Determining...
Code of Federal Regulations, 2010 CFR
2010-07-01
... with the standard must complete SSMP. § 63.6(f)(1) Compliance Except During SSM Yes Applies only to....4730 and 63.4731. § 63.10(b)(2)(i)-(v) Recordkeeping Relevant to SSM Periods and CMS Yes Requirements for SSM records only apply to add-on control devices used to comply with the standard. § 63.10(b)(2...
40 CFR Table 12 to Subpart Ffff of... - Applicability of General Provisions to Subpart FFFF
Code of Federal Regulations, 2013 CFR
2013-07-01
... specified in § 63.2525(j). § 63.6(e)(3)(iii) and (iv) Recordkeeping and Reporting During SSM No, § 63.998(d)(3) and 63.998(c)(1)(ii)(D) through (G) specify the recordkeeping requirement for SSM events, and... permit Yes. § 63.6(f)(1) Compliance Except During SSM Yes. § 63.6(f)(2)-(3) Methods for Determining...
Howell, Doris D
2018-03-01
As individuals are living longer with cancer as a chronic disease, they face new health challenges that require the application of self-management behaviors and skills that may not be in their usual repertoire of self-regulatory health behaviors. Increasing attention is focused on supported self-management (SSM) programs to enable survivors in managing the long-term biopsychosocial consequences and health challenges of survivorship. This review explores current directions and evidence for SSM programs that enable survivors to manage these consequences and optimize health. Cancer survivors face complex health challenges that affect daily functioning and well being. Multiple systematic reviews show that SSM programs have positive effects on health outcomes in typical chronic diseases. However, the efficacy of these approaches in cancer survivors are in their infancy; and the 'one-size' fits all approach for chronic disease self-management may not be adequate for cancer as a complex chronic illness. This review suggests that SSM has promising potential for improving health and well being of cancer survivors, but there is a need for standardizing SSM for future research. Although there is increasing enthusiasm for SSM programs tailored to cancer survivors, there is a need for further research of their efficacy on long-term health outcomes.
HUMAN PANCREATIC POLYPEPTIDE IN A PHOSPHOLIPID BASED MICELLAR FORMULATION
Banerjee, Amrita; Onyuksel, Hayat
2012-01-01
Purpose Pancreatic polypeptide (PP) has important glucoregulatory functions and thereby holds significance in the treatment of diabetes and obesity. However, short plasma half-life and aggregation propensity of PP in aqueous solution, limits its therapeutic application. To address these issues, we prepared and characterized a formulation of PP in sterically stabilized micelles (SSM) that protects and stabilizes PP in its active conformation. Methods PP-SSM was prepared by incubating PP with SSM dispersion in buffer. Peptide-micelle association and freeze-drying efficacy of the formulation was characterized in phosphate buffers with or without sodium chloride using dynamic light scattering, fluorescence spectroscopy and circular dichroism. The degradation kinetics of PP-SSM in presence of proteolytic enzyme was determined using HPLC and bioactivity of the formulation was evaluated by in vitro cAMP inhibition. Results PP self-associated with SSM and this interaction was influenced by presence/absence of sodium chloride in the buffer. The formulation was effectively lyophilized, demonstrating feasibility for its long-term storage. The stability of peptide against proteolytic degradation was significantly improved and PP in SSM retained its bioactivity in vitro. Conclusions Self-association of PP with phospholipid micelles addressed the delivery issues of the peptide. This PP nanomedicine should be further developed for the treatment of diabetes. PMID:22399387
NASA Technical Reports Server (NTRS)
Cavalieri, Donald J. (Editor); Crawford, John P.; Drinkwater, Mark R.; Emery, William J.; Eppler, Duane T.; Farmer, L. Dennis; Fowler, Charles W.; Goodberlet, Mark; Jentz, Robert R.; Milman, Andrew
1992-01-01
The history of the program is described along with the SSM/I sensor, including its calibration and geolocation correction procedures used by NASA, SSM/I data flow, and the NASA program to distribute polar gridded SSM/I radiances and sea ice concentrations (SIC) on CD-ROMs. Following a discussion of the NASA algorithm used to convert SSM/I radiances to SICs, results of 95 SSM/I-MSS Landsat IC comparisons for regions in both the Arctic and the Antarctic are presented. The Landsat comparisons show that the overall algorithm accuracy under winter conditions is 7 pct. on average with 4 pct. negative bias. Next, high resolution active and passive microwave image mosaics from coordinated NASA and Navy aircraft underflights over regions of the Beaufort and Chukchi seas in March 1988 were used to show that the algorithm multiyear IC accuracy is 11 pct. on average with a positive bias of 12 pct. Ice edge crossings of the Bering Sea by the NASA DC-8 aircraft were used to show that the SSM/I 15 pct. ice concentration contour corresponds best to the location of the initial bands at the ice edge. Finally, a summary of results and recommendations for improving the SIC retrievals from spaceborne radiometers are provided.
Stubbs, Matthew; Chan, Kenneth; McMeekin, Helena; Navalkissoor, Shaunak; Wagner, Thomas
2017-02-01
This study aims to compare the incidence of ventilation/perfusion (V/Q) scans interpreted as indeterminate for the diagnosis of pulmonary embolism (PE) using single-photon emission computed tomography (SPECT) versus planar scintigraphy and to consider the effect of variable interpretation of single subsegmental V/Q mismatch (SSM). A total of 1300 consecutive V/Q scans were retrospectively reviewed. After exclusion and matching for age and sex, 542 SPECT and 589 planar scans were included in the analysis. European Association of Nuclear Medicine guidelines were used to interpret the V/Q scans, initially interpreting SSM as negative scans. Patients with SSM were followed up for 3 months and further imaging for PE was collected. Indeterminate scans were significantly fewer in the SPECT than the planar group on the basis of the initial report (7.7 vs. 12.2%, P<0.05). This is irrespective of classification of SSM as a negative scan (4.6 vs. 12.1%, P<0.0001) or an indeterminate scan (8.3 vs. 12.2%, P<0.05). Of the 21 patients who had SSM, 19 underwent computer tomography pulmonary angiogram and embolism was found in one patient. None of these patients died at the 3-month follow-up. V/Q SPECT has greater diagnostic certainty of PE, with a 41% reduction in an indeterminate scan compared with planar scintigraphy. This is irrespective of the clinician's interpretation of SSM as negative or intermediate probability. Patients with SSM would not require further computer tomography pulmonary angiogram imaging.
Cicchiello, Mark; Lin, Matthew J; Pan, Yan; McLean, Catriona; Kelly, John W
2016-05-01
Missed opportunities in the diagnosis of nodular melanoma (NM) carry high prognostic penalties due to the rapid rate of NM growth. To date, an assessment of the pathways to diagnosis of NM versus superficial spreading melanoma (SSM) specifically comparing numbers of opportunities missed to undertake biopsy has not been performed. A retrospective questionnaire of 120 patients (60 NM patients, age and sex matched to 60 SSM patients) from the Victorian Melanoma Service (VMS) database was undertaken to assess pathways to diagnosis. The numbers of opportunities missed to undertake a biopsy and doctor behaviour at such encounters were recorded. Diagnostic delay (overall, patient's and doctor's delay) in terms of time was assessed. Significant differences in opportunities missed to make a diagnosis of NM compared to SSM were found. In all, 43% of NM were biopsied at a first encounter compared to 70% of SSM. All SSM were diagnosed within three reviews. Overall, 33% of NM required at least three and up six reviews until biopsy. Patients with NM were more likely than those with SSM to be reassured that their lesions were benign. No significant differences in terms of time delay to diagnosis between NM and SSM were found. NM contributes disproportionately to melanoma mortality in Australia. Addressing earlier diagnosis of NM with renewed focus may make the biggest impact on the overall mortality of melanoma. The message that a period of observation is not appropriate for patients re-presenting with lesions of concern must be more effectively communicated. © 2015 The Australasian College of Dermatologists.
Fuessinger, Marc Anton; Schwarz, Steffen; Cornelius, Carl-Peter; Metzger, Marc Christian; Ellis, Edward; Probst, Florian; Semper-Hogg, Wiebke; Gass, Mathieu; Schlager, Stefan
2018-04-01
Virtual reconstruction of large cranial defects is still a challenging task. The current reconstruction procedures depend on the surgeon's experience and skills in planning the reconstruction based on mirroring and manual adaptation. The aim of this study is to propose and evaluate a computer-based approach employing a statistical shape model (SSM) of the cranial vault. An SSM was created based on 131 CT scans of pathologically unaffected adult crania. After segmentation, the resulting surface mesh of one patient was established as template and subsequently registered to the entire sample. Using the registered surface meshes, an SSM was generated capturing the shape variability of the cranial vault. The knowledge about this shape variation in healthy patients was used to estimate the missing parts. The accuracy of the reconstruction was evaluated by using 31 CT scans not included in the SSM. Both unilateral and bilateral bony defects were created on each skull. The reconstruction was performed using the current gold standard of mirroring the intact to the affected side, and the result was compared to the outcome of our proposed SSM-driven method. The accuracy of the reconstruction was determined by calculating the distances to the corresponding parts on the intact skull. While unilateral defects could be reconstructed with both methods, the reconstruction of bilateral defects was, for obvious reasons, only possible employing the SSM-based method. Comparing all groups, the analysis shows a significantly higher precision of the SSM group, with a mean error of 0.47 mm compared to the mirroring group which exhibited a mean error of 1.13 mm. Reconstructions of bilateral defects yielded only slightly higher estimation errors than those of unilateral defects. The presented computer-based approach using SSM is a precise and simple tool in the field of computer-assisted surgery. It helps to reconstruct large-size defects of the skull considering the natural asymmetry of the cranium and is not limited to unilateral defects.
Vasoactive Intestinal Peptide Nanomedicine for the Management of Inflammatory Bowel Disease.
Jayawardena, Dulari; Anbazhagan, Arivarasu N; Guzman, Grace; Dudeja, Pradeep K; Onyuksel, Hayat
2017-11-06
Inflammatory bowel disease (IBD) is a chronic relapsing disorder of the intestine, with increasing incidence worldwide. At present, the management of IBD is an unmet medical need due to the ineffectiveness of currently available drugs in treating all patients, and there is strong demand for novel therapeutics. In this regard, vasoactive intestinal peptide, a potent anti-inflammatory endogenous hormone, has shown promise in managing multiple immune disorders in animal models. However, when administered in the free form, VIP undergoes rapid degradation in vivo, and with continuous infusion, it causes severe dose limiting side effects. To overcome these barriers, we have developed a superior mode to deliver VIP in its native form, using sterically stabilized micelles (VIP-SSM). Our previous studies demonstrated that, VIP, when administered in SSM, prevented joint damage and inflammation in a mouse model of rheumatoid arthritis at a significantly lower dose than the free peptide, completely abrogating the serious side effect of hypotension associated with VIP. In the current study, we demonstrate the therapeutic benefit of VIP-SSM over free peptide in reversing severe colitis associated with IBD. First, we conducted preliminary studies with dextran sulfate sodium (DSS) induced colitis in mice, to determine the effectiveness of VIP administered on alternate days in reducing disease severity. Thereafter, a single intra peritoneal injection of VIP-SSM or the free peptide was used to determine its therapeutic effect on the reversal of colitis and associated diarrhea. The results demonstrated that when administered on alternate days, both VIP-SSM and VIP were capable of alleviating DSS colitis in mice. However, when administered as a single dose, in a therapeutic setting, VIP-SSM showed superior benefits compared to the free peptide in ameliorating colitis phenotype. Namely, the loss of solid fecal pellets and increased fluid accumulation in colon resulting from DSS insult was abrogated in VIP-SSM treated mice and not with free VIP. Furthermore, reduced protein and mRNA levels of the major chloride bicarbonate exchanger, down regulated in adenoma (DRA), seen with DSS was reversed with VIP-SSM, but not with the free peptide. Similarly, VIP-SSM treatment significantly reduced the elevated mRNA levels of pro-inflammatory cytokines and showed significant histologic recovery when compared to mice treated with free VIP. Therefore, these results demonstrated that as a single dose, the anti-inflammatory and antidiarrheal effects of VIP can be achieved effectively when administered as a nanomedicine. Therefore, we propose VIP-SSM to be developed as a potential therapeutic tool for treating ulcerative colitis, a type of IBD.
40 CFR Table 7 to Subpart Nnnnn of... - Applicability of General Provisions to Subpart NNNNN
Code of Federal Regulations, 2012 CFR
2012-07-01
...) Operation and maintenance requirements Yes. § 63.6(e)(3) SSM plans Yes. § 63.6(f)(1) Compliance except during SSM Yes. § 63.6(f)(2)-(3) Methods for determining compliance Yes. § 63.6(g) Use of an alternative...) Records related to SSM periods and CMS Yes. § 63.10(b)(2)(xii) Records when under waiver Yes. § 63.10(b)(2...
40 CFR Table 7 to Subpart Nnnnn of... - Applicability of General Provisions to Subpart NNNNN
Code of Federal Regulations, 2014 CFR
2014-07-01
...) Operation and maintenance requirements Yes. § 63.6(e)(3) SSM plans Yes. § 63.6(f)(1) Compliance except during SSM Yes. § 63.6(f)(2)-(3) Methods for determining compliance Yes. § 63.6(g) Use of an alternative...) Records related to SSM periods and CMS Yes. § 63.10(b)(2)(xii) Records when under waiver Yes. § 63.10(b)(2...
40 CFR Table 7 to Subpart Nnnnn of... - Applicability of General Provisions to Subpart NNNNN
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Operation and maintenance requirements Yes. § 63.6(e)(3) SSM plans Yes. § 63.6(f)(1) Compliance except during SSM Yes. § 63.6(f)(2)-(3) Methods for determining compliance Yes. § 63.6(g) Use of an alternative...) Records related to SSM periods and CMS Yes. § 63.10(b)(2)(xii) Records when under waiver Yes. § 63.10(b)(2...
40 CFR Table 7 to Subpart Nnnnn of... - Applicability of General Provisions to Subpart NNNNN
Code of Federal Regulations, 2013 CFR
2013-07-01
...) Operation and maintenance requirements Yes. § 63.6(e)(3) SSM plans Yes. § 63.6(f)(1) Compliance except during SSM Yes. § 63.6(f)(2)-(3) Methods for determining compliance Yes. § 63.6(g) Use of an alternative...) Records related to SSM periods and CMS Yes. § 63.10(b)(2)(xii) Records when under waiver Yes. § 63.10(b)(2...
NASA Technical Reports Server (NTRS)
Robertson, Franklin R.; Cohen, Charles
1990-01-01
An analytical approach is described for diagnostically assimilating moisture data from Special Sensor Microwave Imager (SSM/I) into a global analysis of water vapor, cloud content, and precipitation. In this method, 3D fields of wind and temperature values taken from ECMWF gridded analysis are used to drive moisture conservation equations with parameterized microphysical treatment of vapor, liquid, and ice; the evolving field of water vapor is periodically updated or constrained by SSM/I retrievals of precipitable water. Initial results indicate that this diagnostic model can produce realistic large-scale fields of cloud and precipitation. The resulting water vapor analyses agree well with SSM/I and have an additional advantage of being synoptic.
Six mechanisms used on the SSM/1 radiometer
NASA Technical Reports Server (NTRS)
Ludwig, H. R.
1985-01-01
Future USAF Block 5D Defense Meteorological Satellites will carry a scanning microwave radiometer sensor (SSM/1). SSM/1 senses the emission of microwave energy and returns to earth data used to determine weather conditions, such as rainfall rates, soil moisture, and oceanic wind speed. The overall design of the SSM/1 radiometer was largely influenced by the mechanisms. The radiometer was designed to be stowed in a cavity on the existing spacecraft. The deployment of the sensor is complex due to the constraint of this cavity and the need for precision in the deployment. The radiometer will continuously rotate, instead of oscillate, creating the need for a bearing and power transfer assembly and a momentum compensation device. The six mechanisms developed for this program are described.
NASA Astrophysics Data System (ADS)
Belchansky, G.; Eremeev, V.; Mordvintsev, I.; Platonov, N.; Douglas, D.
The melting events (early melt, melt onset, melt ponding, freeze-up onset) over Arctic sea-ice area are critical for climate and global change studies. They are combined with accuracy of surface energy balances estimates (due to contrasts in the short wave albedo of snow and ice, open water or melt ponds) and drives a number of important processes (onset of snow melt, thawing of boreal forest, etc). M icrowave measurements identify seasonal transition zones due to large differences in emissivity during melt onset, melt ponding and freeze-up periods. This report presents near coincident observation of backscatter cross section (0 ) and brightness temperature (Tb) from Russian OKEAN 01 satellite series, backscatter cross section (0) from RADARSAT-1, brightness temperatures (Tbs) from SSM/I sensors, and near-surface temperature derived from the International Arctic Buoy Program data (IABP) (Belchansky and Douglas, 2000, 2002). To determine the melt duration (time of freeze-up onset minus time of melt onset) passive and active microwave methods were developed. These methods used differences between SSM /I 19.3GHz,H and SSM/I 37.0 GHz, H channels (SSM/I Tb), OKEAN 0 (9.52GHz, VV) and Tb (37.47 GHz, H) channels, RADARSAT-1 0 (5.3GHz, HH), and a threshold technique. An evolution of the SSM/I Tb, OKEAN-01 0 and Tb, RADARSAT ScanSAR 0, MEAN ( 0), SD(0) and SD(0 ) / MEAN(0 ) as function of time was investigated along FY and MY dominant type ice areas during January 1996 through December 1998. The SSM/I, OKEAN and RADARSAT melt onset and freeze up onset algorithms were constructed. The SSM/I algorithm was based- on analysis of the SSM/I Tb. The OKEAN and RADARSAT ScanSAR algorithms were based, respectively, on analysis of OKEAN 0 and Tb of MY and FY sea ice at each MY and FY ice region (200 km by 200 km) determined in OKEAN imagery prior to melting period and changes in RADARSAT SD(0 ) / MEAN(0) of sea-ice during different stages of melting processes at each ice site (75 km by 75 km) determined prior to spring period in ScanSAR imagery. The averaged 12-h near surface temperatures derived from the IABP wer e used to analyze changes in the SSM/I Tb, OKEAN 0 and OKEAN Tb, RADARSAT SD(0) / MEAN(0), and to estimate respective thresholds associated with the melt onset and freeze-up onset. To highlight the sources of differences among various sensors results were compared to understand how the average the melt onset, melt duration and freeze-up onset estimates varied between different instruments and algorithms. A discrepancy in estimates resulted due to the nature of active and passive microwave measurements, frequency and polarization, number of channels, temperature and emissivity effects, and algorithm types. Higher spatial resolution of OKEAN-01 and RADARSAT-1 SAR was an important characteristic for obtaining better estimates of melting parameters. The SSM/ data provide a spatial resolution with global coverageI suitable for circulation models. Therefore OKEAN-01 and RADARSAT measurements can complement SSM/I data. These studies contribute to the growing body of documentation about the levels of disparity obtained when Arctic seasonal transition parameters are calculated using various types of satellite sensors and algorithms. ACKNOWLEDGEMENTS This work was carried out with the support from the International Arctic Research Center and Cooperative Institute for Arctic Research (IARC/CIFAR), University of Alaska Fairbanks. We would like to acknowledge the Alaska SAR Facility (Fairbanks), the National Snow and Ice Data Center (University of Colorado), and the Global Hydrology Resource Center, respectively, for providing RADARSAT images, the DMSP SSM/I Daily Polar Gridded Tb and Sea Ice Concentrations, the single-pass SSM/I brightness temperature data. REFERENCES Belchansky, G. I. and Douglas, D. C. (2000). Classification methods for monitoring Arctic sea-ice using OKEAN passive / active two-channel microwave data. J. Remote Sensing of Environment, Elsevier Science, New York. 73 (3): 307 -322. Belchansky, G. I. and Douglas, D. C. (2002). Seasonal comparisons of sea ice concentration estimates derived from SSM /I, OKEAN, and RADARSAT data. J. Remote Sensing of Environment, Elsevier Science, New York, 81 (1): 67-81.
Lymph Node Macrophages Restrict Murine Cytomegalovirus Dissemination
Farrell, Helen E.; Davis-Poynter, Nick; Bruce, Kimberley; Lawler, Clara; Dolken, Lars; Mach, Michael
2015-01-01
ABSTRACT Cytomegaloviruses (CMVs) establish chronic infections that spread from a primary entry site to secondary vascular sites, such as the spleen, and then to tertiary shedding sites, such as the salivary glands. Human CMV (HCMV) is difficult to analyze, because its spread precedes clinical presentation. Murine CMV (MCMV) offers a tractable model. It is hypothesized to spread from peripheral sites via vascular endothelial cells and associated monocytes. However, viral luciferase imaging showed footpad-inoculated MCMV first reaching the popliteal lymph nodes (PLN). PLN colonization was rapid and further spread was slow, implying that LN infection can be a significant bottleneck. Most acutely infected PLN cells were CD169+ subcapsular sinus macrophages (SSM). Replication-deficient MCMV also reached them, indicating direct infection. Many SSM expressed viral reporter genes, but few expressed lytic genes. SSM expressed CD11c, and MCMV with a cre-sensitive fluorochrome switch showed switched infected cells in PLN of CD11c-cre mice but yielded little switched virus. SSM depletion with liposomal clodronate or via a CD169-diphtheria toxin receptor transgene shifted infection to ER-TR7+ stromal cells, increased virus production, and accelerated its spread to the spleen. Therefore, MCMV disseminated via LN, and SSM slowed this spread by shielding permissive fibroblasts and poorly supporting viral lytic replication. IMPORTANCE HCMV chronically infects most people, and it can cause congenital disability and harm the immunocompromised. A major goal of vaccination is to prevent systemic infection. How this is established is unclear. Restriction to humans makes HCMV difficult to analyze. We show that peripheral MCMV infection spreads via lymph nodes. Here, MCMV infected filtering macrophages, which supported virus replication poorly. When these macrophages were depleted, MCMV infected susceptible fibroblasts and spread faster. The capacity of filtering macrophages to limit MCMV spread argued that their infection is an important bottleneck in host colonization and might be a good vaccine target. PMID:25926638
Attia, D; Schoenemeier, B; Rodt, T; Negm, A A; Lenzen, H; Lankisch, T O; Manns, M; Gebel, M; Potthoff, A
2015-12-01
Hepatic vein pressure gradient (HVPG) is the gold standard for diagnosing clinically significant portal hypertension (CSPH). The aim of this study was to investigate-in comparison to HVPG-the ability to diagnose CSPH by liver and spleen stiffness measurements obtained by acoustic radiation force impulse (ARFI) imaging. A total of 78 patients (mean age: 53 ± 13 years, 62 % male) with chronic liver disease were enrolled in this study. Each patient received liver (LSM) and spleen (SSM) stiffness measurements by ARFI, an HVPG measurement and a transjugular liver biopsy on the same day. Patients were classified according to their HVPG into three different groups: HVPG < 10 mmHg, HVPG ≥ 10-< 12 mmHg and HVPG ≥ 12 mmHg. LSM, SSM were significantly higher in patients with HVPG ≥ 10 - < 12 in comparison to HVPG < 10 mmHg (p < 0.001 and p < 0.001, respectively), and in patients with HVPG ≥ 12 mmHg in comparison to ≥ 10 - < 12 mmHg (p < 0.001 and p < 0.001, respectively). LSM and SSM were able to diagnose HVPG ≥ 10 mmHg and HVPG ≥ 12 mmHg with high diagnostic performance (AUC LSM: 0.93 and 0.87, respectively; AUC SSM: 0.97 and 0.95, respectively). The AUC of SSM in predicting esophageal varices (EVs) plus HVPG ≥ 10 mmHg and EVs plus HVPG ≥ 12 mmHg were higher compared to LSM in both groups of patients (SSM: 0.90 and 0.93 vs. LSM: 0.84 and 0.88, respectively). No significant difference between both AUCs was detected in the different HVPG groups. In the multivariate -analysis SSM remained a factor predicting HVPG (HVPG > 10 mmHg p = 0.007; HVPG ≥ 12 mmHg p = 0.003). LSM and SSM by ARFI are noninvasive diagnostic tools that may help in diagnosing CSPH. LSM and SSM could be used as a guiding noninvasive screening tool in patients with esophageal varices requiring endoscopic evaluation. © Georg Thieme Verlag KG Stuttgart · New York.
Experimental SSM-CVB3 infection in macaques.
Han, Tiesuo; He, Wenqi; Song, Deguang; Zhao, Kui; Wu, Chenchen; Gao, Feng; Lu, Huijun; Gai, Xianying; Wang, Xinrui; Li, Fei; Ji, Cuicui; Lin, Xijuan
2012-02-01
To evaluate the pathogenicity of SSM-CVB3 in a macaque model. The clinical symptoms of macaques were recorded; hematological, biochemical and histopathological evaluations were completed; viral titers and neutralization titers (NT-titers) in sera were tested; and the mRNA levels of SSM-CVB3, coxsackievirus and adenovirus receptor (CAR) and decay accelerating factor (DAF) were determined. After SSM-CVB3 infection, the macaques showed a lack of activity, a poor appetite, a higher body temperature, and severe diarrhea. The macaques also developed hematuria and albuminuria at 4 to 10 days post-inoculation. Virus titers (5.1-6.5 LogTCID(50)/mL) were higher at 6 to 10 days post-inoculation, and NT-titers (6.5-7.3 Log2) reached plateaus at 8 to 14 days post-inoculation. The infected macaques developed serious anemia with decreased RBC and WBC, but the percentages of LYM were increased. The levels of CK, CK-MB, AST and ALT in the sera were 84-169 U/L, 87.6-271.1 U/L, 43-87 U/L and 43-82 U/L, respectively, and all of those were higher than normal. Histological analysis showed obvious cardiac, hepatic and renal damages in the infected macaques and the mRNA contents of SSM-CVB3, CAR and DAF in the heart, liver and kidneys of infected macaques were higher (P<0.05). This was the first report on experimental SSM-CVB3 infections in macaques with serious hepatic and renal damage, except for myocarditis. The information obtained from this study suggests that the SSM-CVB3 strain and this macaque model could be used for studying CVB3-induced cardiac, hepatic or renal diseases. Copyright © 2011 Elsevier Inc. All rights reserved.
NASA Astrophysics Data System (ADS)
Kobayashi, Shinya; Poli, Paul; John, Viju O.
2017-02-01
The near-global and all-sky coverage of satellite observations from microwave humidity sounders operating in the 183 GHz band complement radiosonde and aircraft observations and satellite infrared clear-sky observations. The Special Sensor Microwave Water Vapor Profiler (SSM/T-2) of the Defense Meteorological Satellite Program began operations late 1991. It has been followed by several other microwave humidity sounders, continuing today. However, expertise and accrued knowledge regarding the SSM/T-2 data record is limited because it has remained underused for climate applications and reanalyses. In this study, SSM/T-2 radiances are characterised using several global atmospheric reanalyses. The European Centre for Medium-Range Weather Forecasts (ECMWF) Interim Reanalysis (ERA-Interim), the first ECMWF reanalysis of the 20th-century (ERA-20C), and the Japanese 55-year Reanalysis (JRA-55) are projected into SSM/T-2 radiance space using a fast radiative transfer model. The present study confirms earlier indications that the polarisation state of SSM/T-2 antenna is horizontal (not vertical) in the limit of nadir viewing. The study also formulates several recommendations to improve use of the SSM/T-2 measurement data in future fundamental climate data records or reanalyses. Recommendations are (1) to correct geolocation errors, especially for DMSP 14; (2) to blacklist poor quality data identified in the paper; (3) to correct for inter-satellite biases, estimated here on the order of 1 K, by applying an inter-satellite recalibration or, for reanalysis, an automated (e.g., variational) bias correction; and (4) to improve precipitating cloud filtering or, for reanalysis, consider an all-sky assimilation scheme where radiative transfer simulations account for the scattering effect of hydrometeors.
Passive microwave remote sensing of rainfall with SSM/I: Algorithm development and implementation
NASA Technical Reports Server (NTRS)
Ferriday, James G.; Avery, Susan K.
1994-01-01
A physically based algorithm sensitive to emission and scattering is used to estimate rainfall using the Special Sensor Microwave/Imager (SSM/I). The algorithm is derived from radiative transfer calculations through an atmospheric cloud model specifying vertical distributions of ice and liquid hydrometeors as a function of rain rate. The algorithm is structured in two parts: SSM/I brightness temperatures are screened to detect rainfall and are then used in rain-rate calculation. The screening process distinguishes between nonraining background conditions and emission and scattering associated with hydrometeors. Thermometric temperature and polarization thresholds determined from the radiative transfer calculations are used to detect rain, whereas the rain-rate calculation is based on a linear function fit to a linear combination of channels. Separate calculations for ocean and land account for different background conditions. The rain-rate calculation is constructed to respond to both emission and scattering, reduce extraneous atmospheric and surface effects, and to correct for beam filling. The resulting SSM/I rain-rate estimates are compared to three precipitation radars as well as to a dynamically simulated rainfall event. Global estimates from the SSM/I algorithm are also compared to continental and shipboard measurements over a 4-month period. The algorithm is found to accurately describe both localized instantaneous rainfall events and global monthly patterns over both land and ovean. Over land the 4-month mean difference between SSM/I and the Global Precipitation Climatology Center continental rain gauge database is less than 10%. Over the ocean, the mean difference between SSM/I and the Legates and Willmott global shipboard rain gauge climatology is less than 20%.
1983-08-10
One of the main components of the Hubble Space Telescope (HST) is the Solar Array Drive Electronics (SADE) system. This system interfaces with the Support System Module (SSM) for exchange of operational commands and telemetry data. SADE operates and controls the Solar Array Drive Mechanisms (SADM) for the orientation of the Solar Array Drive (SAD). It also monitors the position of the arrays and the temperature of the SADM. During the first HST servicing mission, the astronauts replaced the SADE component because of some malfunctions. This turned out to be a very challenging extravehicular activity (EVA). Two transistors and two diodes had been thermally stressed with the conformal coating discolored and charred. Soldered cornections became molten and reflowed between the two diodes. The failed transistors gave no indication of defective construction. All repairs were made and the HST was redeposited into orbit. Prior to undertaking this challenging mission, the orbiter's crew trained at Marshall Space Flight Center's (MSFC) Neutral Buoyancy Simulator (NBS) to prepare themselves for working in a low gravity environment. They also practiced replacing HST parts and exercised maneuverability and equipment handling. Pictured are crew members practicing on a space platform.
NASA Technical Reports Server (NTRS)
Jackson, T.; Hsu, A. Y.; ONeill, P. E.
1999-01-01
This study extends a previous investigation on estimating surface soil moisture using the Special Sensor Microwave/Imager (SSM/I) over a grassland region. Although SSM/I is not optimal for soil moisture retrieval, it can under some conditions provide information. Rigorous analyses over land have been difficult due to the lack of good validation data sets. A scientific objective of the Southern Great Plains 1997 (SGP97) Hydrology Experiment was to investigate whether the retrieval algorithms for surface soil moisture developed at higher spatial resolution using truck-and aircraft-based passive microwave sensors can be extended to the coarser resolutions expected from satellite platform. With the data collected for the SGP97, the objective of this study is to compare the surface soil moisture estimated from the SSM/I data with those retrieved from the L-band Electronically Scanned Thinned Array Radiometer (ESTAR) data, the core sensor for the experiment, using the same retrieval algorithm. The results indicated that an error of estimate of 7.81% could be achieved with SSM/I data as contrasted to 2.82% with ESTAR data over three intensive sampling areas of different vegetation regimes. It confirms the results of previous study that SSM/I data can be used to retrieve surface soil moisture information at a regional scale under certain conditions.
Yihan, Sun; Mingming, Liu; Guo, Zhiguang
2018-05-19
Herein, a catalytic mesh with unique wettability, high oil-water separation efficiency and excellent catalytic performance towards aromatic dyes was fabricated. Polypyrrole (PPy) was firstly pre-coated on pristine stainless-steel mesh (SSM) surface via cyclic voltammetry approach. Subsequently, a simple electrodeposition process was performed to prepare and anchor Ag nanoparticles (AgNPs) onto the PPy-coated SSM surface. The PPy-coated mesh with anchored AgNPs was denoted as PPy/AgNPs-coated SSM. The obtained PPy/AgNPs-coated SSM exhibited dual superlyophobic properties and were able to achieve on-demand separation to deal with various of light oil (ρ oil < ρ water ) and heavy oil (ρ oil > ρ water )-water mixtures. Importantly, benefitting from AgNPs on mesh surface, the obtained PPy/AgNPs-coated SSM exhibits exceptional catalytic activity. As proof-of-concept three typical aromatic dye molecules (methylene blue, rhodamine B and Congo red) can be effectivity degraded. Additionally, the degradation of aromatic dyes and oil-water separation were achieved simultaneously when the PPy/AgNPs-coated SSM was converted to water-removing mode. Therefore, the present work is of great significance to the development of novel oil-water filtration membranes and can open a new avenue towards the practicability of metal nanoparticle catalysts in wastewater treatment. Copyright © 2018 Elsevier Inc. All rights reserved.
Rapid detection of Mycobacterium tuberculosis complex in sputum Samples using PURE TB-LAMP assay.
N'guessan, K; Horo, K; Coulibaly, I; Adegbele, J; Kouame-Adjei, N; Seck-Angu, H; Guei, A; Kouakou, J; Dosso, M
2016-12-01
Lack of rapid and accurate diagnostic testing is a critical obstacle to global tuberculosis (TB) control. Sensitivity of sputum smear microscopy (SSM) is not optimal; however, it remains the most prevalent tool for TB confirmation in poor countries. As a part of passive case finding of TB detection, this study was conducted to determine the clinical performance of PURE TB-LAMP assay using liquid culture medium as the gold standard. Centre Antituberculeux de Yopougon is one of the 17 intermediate Tuberculosis centers in Côte d'Ivoire. A standardized questionnaire was submitted to patients with signs and symptoms consistent with tuberculosis by a trained caregiver. After obtaining signed consent forms, sputum samples were collected according to National TB Control Programme guidelines (spot-morning). SSM after Ziehl-Neelsen staining and TB-LAMP assay were blindly performed on the first sample. Samples transported to Institut Pasteur de Côte d'Ivoire were decontaminated according to the N-acetyl-L-Cystein method. In Mycobacteria Growth Indicator Tube (MGIT), 500mL of pellets were inoculated and incubated in the MGIT 960 system. MPT64 antigen was detected in positive cultures. Of the 500 patients enrolled, 469 (232men and 239 women) patients were included. The mean ages of men and women were 36.9 (15-86) and 37.3 (15-37.3) years, respectively. There were 56 (12.2%) HIV-infected patients, including 14 women. Clinical isolates of M. tuberculosis complex were detected for 157 (33.5%) patients. Compared with culturing, the overall sensitivity and specificity of SSM were 86% (95% confidence interval [CI]=81-91) and 96% (95% CI=94-98), respectively. The overall sensitivity and specificity for TB-LAMP was 92% (95% CI=0.88-0.96) and 94% (95% CI=0.91-0.97), respectively. Positive likelihood ratios for TB-LAMP and SSM were 15.3 and 21.5, respectively, and negative likelihood ratios for TB-LAMP and SSM were 0.09 and 0.15, respectively. Among the 469 patients, active tuberculosis was detected using TB-LAMP assay and SSM in 162 (34.5%) and 147 (31.3%) patients, respectively. For accurate diagnostic of pulmonary TB, TB-LAMP could be used as a tool of the first intention. Copyright © 2016.
NASA Astrophysics Data System (ADS)
Albergel, Clément; Munier, Simon; Leroux, Delphine Jennifer; Dewaele, Hélène; Fairbairn, David; Lavinia Barbu, Alina; Gelati, Emiliano; Dorigo, Wouter; Faroux, Stéphanie; Meurey, Catherine; Le Moigne, Patrick; Decharme, Bertrand; Mahfouf, Jean-Francois; Calvet, Jean-Christophe
2017-10-01
In this study, a global land data assimilation system (LDAS-Monde) is applied over Europe and the Mediterranean basin to increase monitoring accuracy for land surface variables. LDAS-Monde is able to ingest information from satellite-derived surface soil moisture (SSM) and leaf area index (LAI) observations to constrain the interactions between soil-biosphere-atmosphere (ISBA, Interactions between Soil, Biosphere and Atmosphere) land surface model (LSM) coupled with the CNRM (Centre National de Recherches Météorologiques) version of the Total Runoff Integrating Pathways (ISBA-CTRIP) continental hydrological system. It makes use of the CO2-responsive version of ISBA which models leaf-scale physiological processes and plant growth. Transfer of water and heat in the soil rely on a multilayer diffusion scheme. SSM and LAI observations are assimilated using a simplified extended Kalman filter (SEKF), which uses finite differences from perturbed simulations to generate flow dependence between the observations and the model control variables. The latter include LAI and seven layers of soil (from 1 to 100 cm depth). A sensitivity test of the Jacobians over 2000-2012 exhibits effects related to both depth and season. It also suggests that observations of both LAI and SSM have an impact on the different control variables. From the assimilation of SSM, the LDAS is more effective in modifying soil moisture (SM) from the top layers of soil, as model sensitivity to SSM decreases with depth and has almost no impact from 60 cm downwards. From the assimilation of LAI, a strong impact on LAI itself is found. The LAI assimilation impact is more pronounced in SM layers that contain the highest fraction of roots (from 10 to 60 cm). The assimilation is more efficient in summer and autumn than in winter and spring. Results shows that the LDAS works well constraining the model to the observations and that stronger corrections are applied to LAI than to SM. A comprehensive evaluation of the assimilation impact is conducted using (i) agricultural statistics over France, (ii) river discharge observations, (iii) satellite-derived estimates of land evapotranspiration from the Global Land Evaporation Amsterdam Model (GLEAM) project and (iv) spatially gridded observation-based estimates of upscaled gross primary production and evapotranspiration from the FLUXNET network. Comparisons with those four datasets highlight neutral to highly positive improvement.
Startup, Shutdown, & Malfunction (SSM) Emissions
EPA issued a final action to ensure states have plans in place that are fully consistent with the Clean Air Act and recent court decisions concerning startup, shutdown and malfunction (SSM) operations.
40 CFR Table 9 to Subpart Vvvvvv... - Applicability of General Provisions to Subpart VVVVVV
Code of Federal Regulations, 2010 CFR
2010-07-01
... 63.6 (e)(1)(i) and (ii), (e)(3), and (f)(1) SSM Requirements No 63.6(h)(1)-(h)(4), (h)(5)(i)-(h)(5... Requirements Yes References to SSM in § 63.8(c) do not apply. 63.8(a)(2) Monitoring Requirements No 63.8(a)(3... to SSM in § 63.8(d) do not apply. 63.8(g)(1)-(g)(4) Yes Data reduction requirements apply only if you...
40 CFR Table 9 to Subpart Vvvvvv... - Applicability of General Provisions to Subpart VVVVVV
Code of Federal Regulations, 2011 CFR
2011-07-01
... 63.6 (e)(1)(i) and (ii), (e)(3), and (f)(1) SSM Requirements No 63.6(h)(1)-(h)(4), (h)(5)(i)-(h)(5... Requirements Yes References to SSM in § 63.8(c) do not apply. 63.8(a)(2) Monitoring Requirements No 63.8(a)(3... to SSM in § 63.8(d) do not apply. 63.8(g)(1)-(g)(4) Yes Data reduction requirements apply only if you...
40 CFR Table 9 to Subpart Vvvvvv... - Applicability of General Provisions to Subpart VVVVVV
Code of Federal Regulations, 2012 CFR
2012-07-01
... 63.6 (e)(1)(i) and (ii), (e)(3), and (f)(1) SSM Requirements No 63.6(h)(1)-(h)(4), (h)(5)(i)-(h)(5... Requirements Yes References to SSM in § 63.8(c) do not apply. 63.8(a)(2) Monitoring Requirements No 63.8(a)(3... to SSM in § 63.8(d) do not apply. 63.8(g)(1)-(g)(4) Yes Data reduction requirements apply only if you...
Estimation and analysis of interannual variations in tropical oceanic rainfall using data from SSM/I
NASA Technical Reports Server (NTRS)
Berg, Wesley
1992-01-01
Rainfall over tropical ocean regions, particularly in the tropical Pacific, is estimated using Special Sensor Microwave/Imager (SSM/I) data. Instantaneous rainfall estimates are derived from brightness temperature values obtained from the satellite data using the Hughes D-Matrix algorithm. Comparisons with other satellite techniques are made to validate the SSM/I results for the tropical Pacific. The correlation coefficients are relatively high for the three data sets investigated, especially for the annual case.
SSM/I Rainfall Volume Correlated with Deepening Rate in Extratropical Cyclones
NASA Technical Reports Server (NTRS)
Petty, Grant W.; Miller, Douglas K.
1994-01-01
With the emergence of reasonably robust, physically based rain rate algorithms designed for the Special Sensor Microwave/Imager (SSM/I), a unique opportunity exists to directly observe a physical component which can contribute to or be a signature of cyclone deepening (latent heat release). The emphasis of the research in this paper is to seek systematic differences in rain rate observed by the SSM/I, using the algorithm of Petty in cases of explosive and nonexplosive cyclone deepening.
Light Bulbs and Change: Systems Thinking and Organisational Learning for New Ventures
ERIC Educational Resources Information Center
Hebel, Misha
2007-01-01
Purpose: The purpose of the paper is to revisit the practical worth of different systems thinking tools applied to three different business clients, which may be dismissed by academic researchers as theoretically old fashioned. Design/methodology/approach: The methodologies used are systems-based (SSM, VSM and causal loop diagrams), culminating in…
Startup, Shutdown, & Malfunction (SSM) Emissions at Industrial Facilities
EPA issued a final action to ensure states have plans in place that are fully consistent with the Clean Air Act and recent court decisions concerning startup, shutdown and malfunction (SSM) operations.
NASA Astrophysics Data System (ADS)
Yu, Peng; Lian, Zhongxu; Xu, Jinkai; Yu, Zhanjiang; Ren, Wanfei; Yu, Huadong
2018-04-01
In this paper, a lot of micron-sized sand granular structures were formed on the substrate of the stainless steel mesh (SSM) by laser treatment. The rough surface with sand granular structures showed superhydrophilic in air and superoleophobic under water. With its special wettability, the SSM by laser treatment could achieve the separation of the oil/water mixture, showing good durability and high separation efficiency, which was very useful in the practical application of large-scale oil/water separation facility for reducing the impacts of oil leaked on the environment. In addition, it showed that the laser-treated SSM had a very high separation rate. The development of the laser-treated SSM is a simple, environmental, economical and high-efficiency method, which provides a new approach to the production of high efficiency facilities for oil/water separation.
Fowler, Amy M; Chan, Szeman Ruby; Sharp, Terry L; Fettig, Nicole M; Zhou, Dong; Dence, Carmen S; Carlson, Kathryn E; Jeyakumar, M; Katzenellenbogen, John A; Schreiber, Robert D; Welch, Michael J
2012-07-01
Estrogen receptor-α (ERα) and progesterone receptor (PR) are expressed in most human breast cancers and are important predictive factors for directing therapy. Because of de novo and acquired resistance to endocrine therapy, there remains a need to identify which ERα-positive (ERα(+))/PR-positive (PR(+)) tumors are most likely to respond. The purpose of this study was to use estrogen- and progestin-based radiopharmaceuticals to image ERα and PR in mouse mammary tumors at baseline and after hormonal therapy and to determine whether changes in these imaging biomarkers can serve as an early predictive indicator of therapeutic response. Mammary adenocarcinomas that spontaneously develop in aged female mice deficient in signal transducer and activator of transcription-1 (STAT1) were used. Imaging of ERα and PR in primary tumor-bearing mice and mice implanted with mammary cell lines (SSM1, SSM2, and SSM3) derived from primary STAT1-deficient (STAT1(-/-)) tumors was performed. Hormonal treatments consisted of estradiol, an ER agonist; letrozole, an aromatase inhibitor; and fulvestrant, a pure ER antagonist. Small-animal PET/CT was performed using (18)F-fluoroestradiol ((18)F-FES) for ER, (18)F-fluoro furanyl norprogesterone ((18)F-FFNP) for PR, and (18)F-FDG for glucose uptake. Tracer uptake in the tumor was quantified and compared with receptor concentration determined by in vitro assays of resected tumors. Primary STAT1(-/-) mammary tumors and implanted SSM2 and SSM3 tumors showed high (18)F-FES and (18)F-FFNP uptake and were confirmed to be ERα(+)/PR(+). Classic estrogen-induced regulation of the progesterone receptor gene was demonstrated by increased (18)F-FFNP uptake of estradiol-treated SSM3 tumors. Treatment with fulvestrant decreased (18)F-FFNP, (18)F-FES, and (18)F-FDG uptake and inhibited growth of SSM3 tumors but decreased only (18)F-FES uptake in SSM2 tumors, with no effect on growth, despite both tumors being ERα(+)/PR(+). Decreased (18)F-FFNP uptake by SSM3 tumors occurred early after initiation of treatment, before measurable tumor growth inhibition. Using small-animal PET, a profile was identified that distinguished fulvestrant-sensitive from fulvestrant-resistant ERα(+)/PR(+) tumors before changes in tumor size. This work demonstrates that imaging baseline tumoral (18)F-FES uptake and initial changes in (18)F-FFNP uptake in a noninvasive manner is a potentially useful strategy to identify responders and nonresponders to endocrine therapy at an early stage.
NASA Astrophysics Data System (ADS)
Albergel, Clément; Munier, Simon; Leroux, Delphine; Fairbairn, David; Dorigo, Wouter; Decharme, Bertrand; Calvet, Jean-Christophe
2017-04-01
Modelling platforms including Land Surface Models (LSMs), forced by gridded atmospheric variables and coupled to river routing models are necessary to increase our understanding of the terrestrial water cycle. These LSMs need to simulate biogeophysical variables like Surface and Root Zone Soil Moisture (SSM, RZSM), Leaf Area Index (LAI) in a way that is fully consistent with the representation of surface/energy fluxes and river discharge simulations. Global SSM and LAI products are now operationally available from spaceborne instruments and they can be used to constrain LSMs through Data Assimilation (DA) techniques. In this study, an offline data assimilation system implemented in Météo-France's modelling platform (SURFEX) is tested over Europe and the Mediterranean basin to increase prediction accuracy for land surface variables. The resulting Land Data Assimilation System (LDAS) makes use of a simplified Extended Kalman Filter (SEKF). It is able to ingests information from satellite derived (i) SSM from the latest version of the ESA Climate Change Initiative as well as (ii) LAI from the Copernicus GLS project to constrain the multilayer, CO2-responsive version of the Interactions Between Soil, Biosphere, and Atmosphere model (ISBA) coupled with Météo-France's version of the Total Runoff Integrating Pathways continental hydrological system (ISBA-CTRIP). ERA-Interim observations based atmospheric forcing with precipitations corrected from Global Precipitation Climatology Centre observations (GPCC) is used to force ISBA-CTRIP at a resolution of 0.5 degree over 2000-2015. The model sensitivity to the assimilated observations is presented and a set of statistical diagnostics used to evaluate the impact of assimilating SSM and LAI on different model biogeophysical variables are provided. It is demonstrated that the assimilation scheme works effectively. The SEKF is able to extract useful information from the data signal at the grid scale and distribute the RZSM and LAI increments throughout the model impacting soil moisture, terrestrial vegetation and water cycle, surface carbon and energy fluxes.
Kar, Subrata; Majumder, D Dutta
2017-08-01
Investigation of brain cancer can detect the abnormal growth of tissue in the brain using computed tomography (CT) scans and magnetic resonance (MR) images of patients. The proposed method classifies brain cancer on shape-based feature extraction as either benign or malignant. The authors used input variables such as shape distance (SD) and shape similarity measure (SSM) in fuzzy tools, and used fuzzy rules to evaluate the risk status as an output variable. We presented a classifier neural network system (NNS), namely Levenberg-Marquardt (LM), which is a feed-forward back-propagation learning algorithm used to train the NN for the status of brain cancer, if any, and which achieved satisfactory performance with 100% accuracy. The proposed methodology is divided into three phases. First, we find the region of interest (ROI) in the brain to detect the tumors using CT and MR images. Second, we extract the shape-based features, like SD and SSM, and grade the brain tumors as benign or malignant with the concept of SD function and SSM as shape-based parameters. Third, we classify the brain cancers using neuro-fuzzy tools. In this experiment, we used a 16-sample database with SSM (μ) values and classified the benignancy or malignancy of the brain tumor lesions using the neuro-fuzzy system (NFS). We have developed a fuzzy expert system (FES) and NFS for early detection of brain cancer from CT and MR images. In this experiment, shape-based features, such as SD and SSM, were extracted from the ROI of brain tumor lesions. These shape-based features were considered as input variables and, using fuzzy rules, we were able to evaluate brain cancer risk values for each case. We used an NNS with LM, a feed-forward back-propagation learning algorithm, as a classifier for the diagnosis of brain cancer and achieved satisfactory performance with 100% accuracy. The proposed network was trained with MR image datasets of 16 cases. The 16 cases were fed to the ANN with 2 input neurons, one hidden layer of 10 neurons and 2 output neurons. Of the 16-sample database, 10 datasets for training, 3 datasets for validation, and 3 datasets for testing were used in the ANN classification system. From the SSM (µ) confusion matrix, the number of output datasets of true positive, false positive, true negative and false negative was 6, 0, 10, and 0, respectively. The sensitivity, specificity and accuracy were each equal to 100%. The method of diagnosing brain cancer presented in this study is a successful model to assist doctors in the screening and treatment of brain cancer patients. The presented FES successfully identified the presence of brain cancer in CT and MR images using the extracted shape-based features and the use of NFS for the identification of brain cancer in the early stages. From the analysis and diagnosis of the disease, the doctors can decide the stage of cancer and take the necessary steps for more accurate treatment. Here, we have presented an investigation and comparison study of the shape-based feature extraction method with the use of NFS for classifying brain tumors as showing normal or abnormal patterns. The results have proved that the shape-based features with the use of NFS can achieve a satisfactory performance with 100% accuracy. We intend to extend this methodology for the early detection of cancer in other regions such as the prostate region and human cervix.
40 CFR 63.1965 - What is a deviation?
Code of Federal Regulations, 2012 CFR
2012-07-01
... of the landfill monitoring and SSM plan requirements, deviations include the items in paragraphs (a.... (c) A deviation occurs when a SSM plan is not developed or maintained on site. [68 FR 2238, Jan. 16...
40 CFR 63.1965 - What is a deviation?
Code of Federal Regulations, 2014 CFR
2014-07-01
... of the landfill monitoring and SSM plan requirements, deviations include the items in paragraphs (a.... (c) A deviation occurs when a SSM plan is not developed or maintained on site. [68 FR 2238, Jan. 16...
NASA Astrophysics Data System (ADS)
Checkland, Peter; Poulter, John
Soft systems methodology (SSM) is an approach for tackling problematical, messy situations of all kinds. It is an action-oriented process of inquiry into problematic situations in which users learn their way from finding out about the situation, to taking action to improve it. The learning emerges via an organised process in which the situation is explored using a set of models of purposeful action (each built to encapsulate a single worldview) as intellectual devices, or tools, to inform and structure discussion about a situation and how it might be improved. This paper, written by the original developer Peter Checkland and practitioner John Poulter, gives a clear and concise account of the approach that covers SSM's specific techniques, the learning cycle process of the methodology and the craft skills which practitioners develop. This concise but theoretically robust account nevertheless includes the fundamental concepts, techniques, core tenets described through a wide range of settings.
Determinations of cloud liquid water in the tropics from the SSM/I
NASA Technical Reports Server (NTRS)
Alishouse, John C.; Swift, Calvin; Ruf, Christopher; Snyder, Sheila; Vongsathorn, Jennifer
1989-01-01
Upward-looking microwave radiometric observations were used to validate the SSM/I determinations, and also as a basis for the determination of new coefficients. Due to insufficiency of the initial four channel algorithm for cloud liquid water, the improved algorithm was derived from the CORRAD (the University of Massachusetts autocorrelation radiometer) measurements of cloud liquid water and the matching SSM/I brightness temperatures using the standard linear regression. The correlation coefficients for the possible four channel combinations, and subsequently the best and the worst combinations were determined.
NASA Technical Reports Server (NTRS)
Swift, C. T.; Goodberlet, M. A.; Wilkerson, J. C.
1990-01-01
The Defence Meteorological Space Program's (DMSP) Special Sensor Microwave/Imager (SSM/I), an operational wind speed algorithm was developed. The algorithm is based on the D-matrix approach which seeks a linear relationship between measured SSM/I brightness temperatures and environmental parameters. D-matrix performance was validated by comparing algorithm derived wind speeds with near-simultaneous and co-located measurements made by off-shore ocean buoys. Other topics include error budget modeling, alternate wind speed algorithms, and D-matrix performance with one or more inoperative SSM/I channels.
NASA Technical Reports Server (NTRS)
Markham, Brian L.; Jenstrom, Del; Masek, Jeffrey G.; Dabney, Phil; Pedelty, Jeffrey A.; Barsi, Julia A.; Montanaro, Matthew
2016-01-01
The Landsat 9 mission, currently under development and proceeding towards a targeted launch in late 2020, will be very similar to the Landsat 8 mission, launched in 2013. Like Landsat 8, Landsat 9 is a joint effort between NASA and USGS with two sensors, the Operational Land Imager 2 (OLI-2), essentially a copy of the OLI on Landsat 8 and the Thermal Infrared Sensor 2 (TIRS-2), very similar to the TIRS on Landsat 8. The OLI-2, like OLI, provides 14-bit image data, though for Landsat 9, all 14 bits will be retained and transmitted to the ground. The focal plane modules to be used for OLI-2 were flight spares for OLI and are currently being retested by Ball Aerospace. Results indicate radiometric performance comparable to OLI. The TIRS was a class C instrument, with a 3-year design lifetime, and therefore had limited redundancy. TIRS-2 will be a class B instrument, with a 5-year design lifetime, like OLI (and OLI-2), necessitating design changes to increase redundancy. The stray light and Scene Select Mechanism (SSM) encoder problems observed on orbit with TIRS have also instigated a few design changes to TIRS-2. Stray light analysis and testing have indicated that additional baffles in the TIRS-2 optical system will suppress the out-of-field response. The SSM encoder problems have not been definitively traced to a route cause, though conductive anodic filament growth in the circuit boards is suspected. Improved designs for the encoder are being considered for TIRS-2. The spare Focal Plane Array (FPA) from TIRS is planned for use in TIRS-2; FPA spectral and radiometric performance testing is scheduled for September of this year at NASA's Goddard Space Flight Center.
Calibration of Sea Ice Motion from QuikSCAT with those from SSM/I and Buoy
NASA Technical Reports Server (NTRS)
Liu, Antony K.; Zhao, Yun-He; Zukor, Dorothy J. (Technical Monitor)
2001-01-01
QuikSCAT backscatter and DMSP SSM/I radiance data are used to derive sea ice motion for both the Arctic and Antarctic region using wavelet analysis method. This technique provides improved spatial coverage over the existing array of Arctic Ocean buoys and better temporal resolution over techniques utilizing satellite data from Synthetic Aperture Radar (SAR). Sea ice motion of the Arctic for the period from October 1999 to March 2000 derived from QuikSCAT and SSM/I data agrees well with that derived from ocean buoys quantitatively. Thus the ice tracking results from QuikSCAT and SSM/I are complement to each other, Then, three sea-ice drift daily results from QuikSCAT, SSM/I, and buoy data can be merged to generate composite maps with more complete coverage of sea ice motion than those from single data source. A series of composite sea ice motion maps for December 1999 show that the major circulation patterns of sea ice motion are changing and shifting significantly within every four days and they are dominated by wind forcing. Sea-ice drift in the summer can not be derived from NSCAT and SSM/I data. In later summer of 1999 (in September), however, QuikSCAT data can provide good sea ice motion information in the Arctic. QuiksCAT can also provide at least partial sea ice motion information until June 15 in early summer 1999. For the Antarctic, case study shows that sea ice motion derived from QuikSCAT data is predominantly forced by and is consistent with wind field derived from QuikSCAT around the polar region. These calibrated/validated results indicate that QuikSCAT, SSM/I, and buoy merged daily ice motion are suitably accurate to identify and closely locate sea ice processes, and to improve our current knowledge of sea ice drift and related processes through the data assimilation of ocean-ice numerical model.
Ochs, Marco M; Siepen, Fabian Aus dem; Fritz, Thomas; Andre, Florian; Gitsioudis, Gitsios; Korosoglou, Grigorios; Seitz, Sebastian; Bogomazov, Yuriy; Schlett, Christopher L; Sokiranski, Roman; Sommer, Andre; Gückel, Friedemann; Brado, Matthias; Kauczor, Hans-Ulrich; Görich, Johannes; Friedrich, Matthias G W; Katus, Hugo A; Buss, Sebastian J
2017-07-01
The usage of coronary CT angiography (CTA) is appropriate in patients with acute or chronic chest pain; however the diagnostic accuracy may be challenged with increased Agatston score (AS), increased heart rate, arrhythmia and severe obesity. Thus, we aim to determine the potential of the recently introduced third-generation dual-source CT (DSCT) for CTA in a 'real-life' clinical setting. Two hundred and sixty-eight consecutive patients (age: 67 ± 10 years; BMI: 27 ± 5 kg/m²; 61% male) undergoing clinically indicated CTA with DSCT were included in the retrospective single-center analysis. A contrast-enhanced volume dataset was acquired in sequential (SSM) (n = 151) or helical scan mode (HSM) (n = 117). Coronary segments were classified in diagnostic or non-diagnostic image quality. A subset underwent invasive angiography to determine the diagnostic accuracy of CTA. SSM (96.8 ± 6%) and HSM (97.5 ± 8%) provided no significant differences in the overall diagnostic image quality. However, AS had significant influence on diagnostic image quality exclusively in SSM (B = 0.003; p = 0.0001), but not in HSM. Diagnostic image quality significantly decreased in SSM in patients with AS ≥2,000 (p = 0.03). SSM (sensitivity: 93.9%; specificity: 96.7%; PPV: 88.6%; NPV: 98.3%) and HSM (sensitivity: 97.4%; specificity: 94.3%; PPV: 86.0%; NPV: 99.0%) provided comparable diagnostic accuracy (p = n.s.). SSM yielded significantly lower radiation doses as compared to HSM (2.1 ± 2.0 vs. 5.1 ± 3.3 mSv; p = 0.0001) in age and BMI-matched cohorts. SSM in third-generation DSCT enables significant dose savings and provides robust diagnostic image quality in patients with AS ≤2000 independent of heart rate, heart rhythm or obesity.
Dessinioti, Clio; Geller, Alan C; Stergiopoulou, Aravella; Swetter, Susan M; Baltas, Eszter; Mayer, Jonathan E; Johnson, Timothy M; Talaganis, John; Trakatelli, Myrto; Tsoutsos, Dimitrios; Tsourouflis, Gerasimos; Stratigos, Alexander J
2018-04-18
Early melanoma detection strategies include skin self-examination (SSE), physician skin examination (PSE), and promotion of patient knowledge about skin cancer. To investigate the association of SSE, PSE, and patient attitudes with the detection of thinner superficial spreading melanoma (SSM) and nodular melanoma (NM), the latter of which tends to elude early detection. This cross-sectional, questionnaire-based, multicenter study identified patients with newly diagnosed cutaneous melanoma at 4 referral hospital centers in the United States, Greece, and Hungary. Among 920 patients with a primary invasive melanoma, 685 patients with SSM or NM subtype were included. A standardized questionnaire was used to record sociodemographic information, SSE and PSE practices, and patient perceptions in the year prior to diagnosis. Data were analyzed according to histologic thickness, with a 2-mm cutoff for thinner SSM and NM. Of 685 participants (mean [SD] age, 55.6 [15.1] years; 318 [46%] female), thinner melanoma was detected in 437 of 538 SSM (81%) and in 40 of 147 NM (27%). Patients who routinely performed SSE were more likely to be diagnosed with thinner SSM (odds ratio [OR], 2.61; 95% CI, 1.14-5.40) but not thinner NM (OR, 2.39; 95% CI, 0.84-6.80). Self-detected clinical warning signs (eg, elevation and onset of pain) were markers of thicker SSM and NM. Whole-body PSE was associated with a 2-fold increase in detection of thinner SSM (OR, 2.25; 95% CI, 1.16-4.35) and thinner NM (OR, 2.67; 95% CI, 1.05-6.82). Patient attitudes and perceptions focusing on increased interest in skin cancer were associated with the detection of thinner NM. Our findings underscore the importance of complementary practices by patients and physicians for the early detection of melanoma, including regular whole-body PSE, SSE, and increased patient awareness.
Estimates of surface humidity and latent heat fluxes over oceans from SSM/I data
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cho, S.H.; Atlas, R.M.; Shie, C.L.
1995-08-01
Monthly averages of daily latent heat fluxes over the oceans for February and August 1988 are estimated using a stability-dependent bulk scheme. Daily fluxes are computed from daily SSM/I (Special Sensor Microwave/Imager) wind speeds and EOF-retrieved SSM/I surface humidity, National Meteorological Center sea surface temperatures, and the European Centre for Medium-Range Weather Forecasts analyzed 2-m temperatures. Daily surface specific humidity (Q) is estimated from SSM/I precipitable water of total (W) and a 500-m bottom layer (W{sub B}) using an EOF (empirical orthogonal function) method. This method has six W-based categories of EOFs (independent of geographical locations) and is developed usingmore » 23 177 FGGE IIb humidity soundings over the global oceans. For 1200 FGGE IIb humidity soundings, the accuracy of EOF-retrieved Q is 0.75 g kg{sup -1} for the case without errors in W and W{sub B} and increases to 1.16 g kg{sup -1} for the case with errors in W and W{sub B}. Compared to 342 collocated radiosonde observations, the EOF-retrieved SSM/I Q has an accuracy of 1.7 g kg{sup -1}. The method improves upon the humidity retrieval of Liu and is competitive with that of Schulz et al. The SSM/I surface humidity and latent heat fluxes of these two months agree reasonably well with those of COADS (Comprehensive Ocean-Atmosphere Data Set). Compared to the COADS, the sea-air humidity difference of SSM/I has a positive bias of approximately 1-3 g kg{sup -1} (an overestimation of flux) over the wintertime eastern equatorial Pacific Ocean, it has a negative bias of about 1-2 g kg{sup -1} (an underestimation of flux). The results further suggest that the two monthly flux estimates, computed from daily and monthly mean data, do not differ significantly over the oceans. 35 refs., 12 figs., 4 tabs.« less
NASA Astrophysics Data System (ADS)
Ghosh, Sukanya; Roy, Souvanic; Sanyal, Manas Kumar
2016-09-01
With the help of a case study, the article has explored current practices of implementation of governmental affordable housing programme for urban poor in a slum of India. This work shows that the issues associated with the problems of governmental affordable housing programme has to be addressed to with a suitable methodology as complexities are not only dealing with quantitative data but qualitative data also. The Hard System Methodologies (HSM), which is conventionally applied to address the issues, deals with real and known problems which can be directly solved. Since most of the issues of affordable housing programme as found in the case study are subjective and complex in nature, Soft System Methodology (SSM) has been tried for better representation from subjective points of views. The article explored drawing of Rich Picture as an SSM approach for better understanding and analysing complex issues and constraints of affordable housing programme so that further exploration of the issues is possible.
Zimmermann, Johannes; Wright, Aidan G C
2017-01-01
The interpersonal circumplex is a well-established structural model that organizes interpersonal functioning within the two-dimensional space marked by dominance and affiliation. The structural summary method (SSM) was developed to evaluate the interpersonal nature of other constructs and measures outside the interpersonal circumplex. To date, this method has been primarily descriptive, providing no way to draw inferences when comparing SSM parameters across constructs or groups. We describe a newly developed resampling-based method for deriving confidence intervals, which allows for SSM parameter comparisons. In a series of five studies, we evaluated the accuracy of the approach across a wide range of possible sample sizes and parameter values, and demonstrated its utility for posing theoretical questions on the interpersonal nature of relevant constructs (e.g., personality disorders) using real-world data. As a result, the SSM is strengthened for its intended purpose of construct evaluation and theory building. © The Author(s) 2015.
Determination of cloud liquid water content using the SSM/I
NASA Technical Reports Server (NTRS)
Alishouse, John C.; Snider, Jack B.; Westwater, Ed R.; Swift, Calvin T.; Ruf, Christopher S.
1990-01-01
As part of a calibration/validation effort for the special sensor microwave/imager (SSM/I), coincident observations of SSM/I brightness temperatures and surface-based observations of cloud liquid water were obtained. These observations were used to validate initial algorithms and to derive an improved algorithm. The initial algorithms were divided into latitudinal-, seasonal-, and surface-type zones. It was found that these initial algorithms, which were of the D-matrix type, did not yield sufficiently accurate results. The surface-based measurements of channels were investigated; however, the 85V channel was excluded because of excessive noise. It was found that there is no significant correlation between the SSM/I brightness temperatures and the surface-based cloud liquid water determination when the background surface is land or snow. A high correlation was found between brightness temperatures and ground-based measurements over the ocean.
Background for Joint Systems Aspects of AIR 6000
2000-04-01
Checkland’s Soft Systems Methodology [7, 8,9]. The analytical techniques that are proposed for joint systems work are based on calculating probability...Supporting Global Interests 21 DSTO-CR-0155 SLMP Structural Life Management Plan SOW Stand-Off Weapon SSM Soft Systems Methodology UAV Uninhabited Aerial... Systems Methodology in Action, John Wiley & Sons, Chichester, 1990. [101 Pearl, Judea, Probabilistic Reasoning in Intelligent Systems: Networks of Plausible
Security Quality Requirements Engineering (SQUARE) Methodology
2005-11-01
such as Joint Application Development and the Accelerated Requirements Method [Wood 89, Hubbard 99] • Soft Systems Methodology [Checkland 89...investigated were misuse cases [Jacobson 92], Soft Systems Methodology (SSM) [Checkland 89], Quality Function Deployment (QFD) [QFD 05], Con- trolled...html (2005). [Checkland 89] Checkland, Peter. Soft Systems Methodology . Rational Analysis for a Problematic World. New York, NY: John Wiley & Sons
Functional deficiencies of subsarcolemmal mitochondria in the type 2 diabetic human heart
Croston, Tara L.; Thapa, Dharendra; Holden, Anthony A.; Tveter, Kevin J.; Lewis, Sara E.; Shepherd, Danielle L.; Nichols, Cody E.; Long, Dustin M.; Olfert, I. Mark; Jagannathan, Rajaganapathi
2014-01-01
The mitochondrion has been implicated in the development of diabetic cardiomyopathy. Examination of cardiac mitochondria is complicated by the existence of spatially distinct subpopulations including subsarcolemmal (SSM) and interfibrillar (IFM). Dysfunction to cardiac SSM has been reported in murine models of type 2 diabetes mellitus; however, subpopulation-based mitochondrial analyses have not been explored in type 2 diabetic human heart. The goal of this study was to determine the impact of type 2 diabetes mellitus on cardiac mitochondrial function in the human patient. Mitochondrial subpopulations from atrial appendages of patients with and without type 2 diabetes were examined. Complex I- and fatty acid-mediated mitochondrial respiration rates were decreased in diabetic SSM compared with nondiabetic (P ≤ 0.05 for both), with no change in IFM. Electron transport chain (ETC) complexes I and IV activities were decreased in diabetic SSM compared with nondiabetic (P ≤ 0.05 for both), with a concomitant decline in their levels (P ≤ 0.05 for both). Regression analyses comparing comorbidities determined that diabetes mellitus was the primary factor accounting for mitochondrial dysfunction. Linear spline models examining correlative risk for mitochondrial dysfunction indicated that patients with diabetes display the same degree of state 3 and electron transport chain complex I dysfunction in SSM regardless of the extent of glycated hemoglobin (HbA1c) and hyperglycemia. Overall, the results suggest that independent of other pathologies, mitochondrial dysfunction is present in cardiac SSM of patients with type 2 diabetes and the degree of dysfunction is consistent regardless of the extent of elevated HbA1c or blood glucose levels. PMID:24778174
Wengler, Craig A; Valente, Stephanie A; Al-Hilli, Zahraa; Woody, Neil M; Muntean, Julia H; Abraham, Jame; Tendulkar, Rahul D; Djohan, Risal; O'Rourke, Colin; Crowe, Joseph P; Grobmyer, Stephen R
2017-12-01
We evaluated oncologic outcomes and complications of skin-sparing mastectomy (SSM) and nipple-sparing mastectomy (NSM) with immediate reconstruction (IR) after neoadjuvant chemotherapy (NAC) in patients with early-stage and locally advanced breast cancer (BC). BC patients from 2000 to 2014 treated with NAC followed by SSM/NSM and IR were reviewed. Patient demographics, tumor characteristics, NAC response, complications, and recurrence were analyzed. Two hundred sixty-nine patients with 280 BCs were treated with NAC followed by SSM (94%) or NSM (6%) with IR. Median age was 47 (26-72) years with a median follow-up of 45 months. Pathologic complete response (pCR) was noted in 49 (17.5%) cases. Overall 30-day complication rate was 13.2%. Variables associated with complications included BMI (P < 0.0001), tobacco use (P = 0.015), and adjuvant radiation (P = 0.025). Local-regional recurrence was 3.2% and metastatic recurrence was 13.2%. Variables predicting recurrence risk were pre-NAC tumor size (P < 0.001), residual tumor size (P = 0.002), Grade III (P = 0.002), HER-2 negative (P = 0.025), pre-NAC nodal disease (P = 0.05), and lack of pCR (P = 0.045). Following NAC, risk factors for complications in patients undergoing SSM/NSM with IR are high BMI, smoking, and adjuvant XRT. SSM/NSM following NAC is associated with excellent local control. These data support expanding the indications for NSM/SSM to include patients receiving NAC. © 2017 Wiley Periodicals, Inc.
Khaja, Fatima; Kuzmis, Antonina; Önyüksel, Hayat
2013-01-01
Breast cancer is a leading cause of cancer deaths among women in the US, with 40 % chance of relapse after treatment. Recent studies outline the role of cancer stem cells (CSCs) in tumor initiation, propagation, and regeneration of cancer. Moreover, it has been established that breast CSCs reside in a quiescent state that makes them more resistant to conventional cancer therapies than bulk cancer cells resulting in tumor relapse. In this study, we establish that CSCs are associated with the overexpression of vasoactive intestinal peptide (VIP) receptors which can be used to actively target these cells. We investigated the potential of using a novel curcumin nanomedicine (C-SSM) surface conjugated with VIP to target and hinder breast cancer with CSCs. Here, we formulated, characterized, and evaluated the feasibility of C-SSM nanomedicine in vitro. We investigated the cytotoxicity of C-SSM on breast cancer cells and CSCs by tumorsphere formation assay. Our results suggest that curcumin can be encapsulated in SSM up to 200 μg/ml with 1 mM lipid concentration. C-SSM nanomedicine is easy to prepare and maintains its original physicochemical properties after lyophilization, with an IC50 that is significantly improved from that of free curcumin (14.2±1.2 vs. 26.1±3.0 μM). Furthermore, C-SSM-VIP resulted in up to 20 % inhibition of tumorsphere formation at a dose of 5 μM. To this end, our findings demonstrate the feasibility of employing our actively targeted nanomedicine as a potential therapy for CSCs-enriched breast cancer. PMID:24363979
A method for independent modelling in support of regulatory review of dose assessments.
Dverstorp, Björn; Xu, Shulan
2017-11-01
Several countries consider geological disposal facilities as the preferred option for spent nuclear fuel due to their potential to provide isolation from the surface environment on very long timescales. In 2011 the Swedish Nuclear Fuel & Waste Management Co. (SKB) submitted a license application for construction of a spent nuclear fuel repository. The disposal method involves disposing spent fuel in copper canisters with a cast iron insert at about 500 m depth in crystalline basement rock, and each canister is surrounded by a buffer of swelling bentonite clay. SKB's license application is supported by a post-closure safety assessment, SR-Site. SR-Site has been reviewed by the Swedish Radiation Safety Authority (SSM) for five years. The main method for review of SKB's license application is document review, which is carried out by SSM's staff and supported by SSM's external experts. The review has proven a challenging task due to its broad scope, complexity and multidisciplinary nature. SSM and its predecessors have, for several decades, been developing independent models to support regulatory reviews of post-closure safety assessments for geological repositories. For the review of SR-Site, SSM has developed a modelling approach with a structured application of independent modelling activities, including replication modelling, use of alternative conceptual models and bounding calculations, to complement the traditional document review. This paper describes this scheme and its application to biosphere and dose assessment modelling. SSM's independent modelling has provided important insights regarding quality and reasonableness of SKB's rather complex biosphere modelling and has helped quantifying conservatisms and highlighting conceptual uncertainty. Copyright © 2017 Elsevier Ltd. All rights reserved.
Niessen, K V; Muschik, S; Langguth, F; Rappenglück, S; Seeger, T; Thiermann, H; Worek, F
2016-04-15
Organophosphorus compounds (OPC), i.e. nerve agents or pesticides, are highly toxic due to their strong inhibition potency against acetylcholinesterase (AChE). Inhibited AChE results in accumulation of acetylcholine in the synaptic cleft and thus the desensitisation of the nicotinic acetylcholine receptor (nAChR) in the postsynaptic membrane is provoked. Direct targeting of nAChR to reduce receptor desensitisation might be an alternative therapeutic approach. For drug discovery, functional properties of potent therapeutic candidates need to be investigated in addition to affinity properties. Solid supported membrane (SSM)-based electrophysiology is useful for functional characterisation of ligand-gated ion channels like nAChRs, as charge translocations via capacitive coupling of the supporting membrane can be measured. By varying the agonist (carbamoylcholine) concentration, different functional states of the nAChR were initiated. Using plasma membrane preparations obtained from Torpedo californica electric organ, functional properties of selected nAChR ligands and non-oxime bispyridinium compounds were investigated. Depending on overall-size, the bispyridinium compounds enhanced or inhibited cholinergic signals induced by 100 μM carbamoylcholine. Applying excessive concentrations of the agonist carbamoylcholine provoked desensitisation of the nAChRs, whereas addition of bispyridinium compounds bearing short alkyl linkers exhibited functional recovery of previously desensitised nAChRs. The results suggest that these non-oxime bispyridinium compounds possibly interacted with nAChR subtypes in a manner of a positive allosteric modulator (PAM). The described newly developed functional assay is a valuable tool for the assessment of functional properties of potential compounds such as nAChR modulating ligands, which might be a promising approach in the therapeutically treatment of OPC-poisonings. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Hou, Arthur Y.; Zhang, Sara Q.; daSilva, Arlindo M.; Olson, William S.; Kummerow, Christian D.; Simpson, Joanne
2000-01-01
The Global Precipitation Mission, a satellite project under consideration as a follow-on to the Tropical Rainfall Measuring Mission (TRMM) by the National Aeronautics and Space Agency (NASA) in the United States, the National Space Development Agency (NASDA) in Japan, and other international partners, comprises an improved TRMM-like satellite and a constellation of 8 satellites carrying passive microwave radiometers to provide global rainfall measurements at 3-hour intervals. The success of this concept relies on the merits of rainfall estimates derived from passive microwave radiometers. This article offers a proof-of-concept demonstration of the benefits of using, rainfall and total precipitable water (TPW) information derived from such instruments in global data assimilation with observations from the TRMM Microwave Imager (TMI) and 2 Special Sensor Microwave/Imager (SSM/I) instruments. Global analyses that optimally combine observations from diverse sources with physical models of atmospheric and land processes can provide a comprehensive description of the climate systems. Currently, such data analyses contain significant errors in primary hydrological fields such as precipitation and evaporation, especially in the tropics. We show that assimilating the 6-h averaged TMI and SSM/I surface rainrate and TPW retrievals improves not only the hydrological cycle but also key climate parameters such as clouds, radiation, and the upper tropospheric moisture in the analysis produced by the Goddard Earth Observing System (GEOS) Data Assimilation System, as verified against radiation measurements by the Clouds and the Earth's Radiant Energy System (CERES) instrument and brightness temperature observations by the TIROS Operational Vertical Sounder (TOVS) instruments. Typically, rainfall assimilation improves clouds and radiation in areas of active convection, as well as the latent heating and large-scale motions in the tropics, while TPW assimilation leads to reduced moisture biases and improved radiative fluxes in clear-sky regions. Ensemble forecasts initialized with analyses that incorporate TMI and SSM/I rainfall and TPW data also yield better short-range predictions of geopotential heights, winds, and precipitation in the tropics. This study offers a compelling illustration of the potential of using rainfall and TPW information derived from passive microwave instruments to significantly improve the quality of 4-dimensional global datasets for climate analysis and weather forecasting applications.
Energy Saving Melting and Revert Reduction Technology: Innovative Semi-Solid Metal (SSM) Processing
DOE Office of Scientific and Technical Information (OSTI.GOV)
Diran Apelian
2012-08-15
Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts frommore » a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and the scrap recycling issues are alleviated. The CRP (Trade Marked) is a process where the molten metal flows through a reactor prior to casting. The role of the reactor is to ensure that copious nucleation takes place and that the nuclei are well distributed throughout the system prior to entering the casting cavity. The CRP (Trade Marked) has been successfully applied in hyper-eutectic Al-Si alloys (i.e., 390 alloy) where two liquids of equal or different compositions and temperatures are mixed in the reactor and creating a SSM slurry. The process has been mostly used for hypo-eutectic Al-Si alloys (i.e., 356, 357, etc.) where a single melt passes through the reactor. In addition, the CRP (Trade Marked) was designed to be flexible for thixocasting or rheocasting applications as well as batch or continuous casting. Variable heat extraction rates can be obtained by controlling either the superheat of the melt, the temperature of the channel system, or the temperature of the reactor. This program had four main objectives all of which were focused on a mechanistic understanding of the process in order to be able to scale it up, to develop it into a robust process,and for SSM processing to be commercially used.« less
NASA Astrophysics Data System (ADS)
Gautam, Nitin
The main objectives of this thesis are to develop a robust statistical method for the classification of ocean precipitation based on physical properties to which the SSM/I is sensitive and to examine how these properties vary globally and seasonally. A two step approach is adopted for the classification of oceanic precipitation classes from multispectral SSM/I data: (1)we subjectively define precipitation classes using a priori information about the precipitating system and its possible distinct signature on SSM/I data such as scattering by ice particles aloft in the precipitating cloud, emission by liquid rain water below freezing level, the difference of polarization at 19 GHz-an indirect measure of optical depth, etc.; (2)we then develop an objective classification scheme which is found to reproduce the subjective classification with high accuracy. This hybrid strategy allows us to use the characteristics of the data to define and encode classes and helps retain the physical interpretation of classes. The classification methods based on k-nearest neighbor and neural network are developed to objectively classify six precipitation classes. It is found that the classification method based neural network yields high accuracy for all precipitation classes. An inversion method based on minimum variance approach was used to retrieve gross microphysical properties of these precipitation classes such as column integrated liquid water path, column integrated ice water path, and column integrated min water path. This classification method is then applied to 2 years (1991-92) of SSM/I data to examine and document the seasonal and global distribution of precipitation frequency corresponding to each of these objectively defined six classes. The characteristics of the distribution are found to be consistent with assumptions used in defining these six precipitation classes and also with well known climatological patterns of precipitation regions. The seasonal and global distribution of these six classes is also compared with the earlier results obtained from Comprehensive Ocean Atmosphere Data Sets (COADS). It is found that the gross pattern of the distributions obtained from SSM/I and COADS data match remarkably well with each other.
Sustaining Competitive Advantage: Mental Models and Organizational Learning for Future Marines
2007-01-01
Soft Systems Methodology : Other Voices.” Systemic Practice and Action Research. 13, no. 6, (2000): 773. Larsen, Kai R. T., Claire McInerney...30. Mingers, John. “An Idea Ahead of Its Time: The History and Development of Soft Systems Methodology .” Systemic Practice and Action...Soft System Dynamics Methodology (SSDM): Combinging Soft Systems Methodology (SSM) and System Dynamics (SD).” Systemic Practice and Action
40 CFR 63.8075 - What reports must I submit and when?
Code of Federal Regulations, 2014 CFR
2014-07-01
..., and WW of this part 63. (5) For each SSM during which excess emissions occur, the compliance report... (e)(6)(iii)(A) through (K) of this section. This includes periods of SSM. (A) The date and time that...
40 CFR 63.8075 - What reports must I submit and when?
Code of Federal Regulations, 2011 CFR
2011-07-01
..., and WW of this part 63. (5) For each SSM during which excess emissions occur, the compliance report... (e)(6)(iii)(A) through (K) of this section. This includes periods of SSM. (A) The date and time that...
40 CFR 63.8075 - What reports must I submit and when?
Code of Federal Regulations, 2013 CFR
2013-07-01
..., and WW of this part 63. (5) For each SSM during which excess emissions occur, the compliance report... (e)(6)(iii)(A) through (K) of this section. This includes periods of SSM. (A) The date and time that...
Scanning sky monitor (SSM) onboard AstroSat
NASA Astrophysics Data System (ADS)
Ramadevi, M. C.; Seetha, S.; Bhattacharya, Dipankar; Ravishankar, B. T.; Sitaramamurthy, N.; Meena, G.; Sharma, M. Ramakrishna; Kulkarni, Ravi; Babu, V. Chandra; Kumar; Singh, Brajpal; Jain, Anand; Yadav, Reena; Vaishali, S.; Ashoka, B. N.; Agarwal, Anil; Balaji, K.; Nagesh, G.; Kumar, Manoj; Gaan, Dhruti Ranjan; Kulshresta, Prashanth; Agarwal, Pankaj; Sebastian, Mathew; Rajarajan, A.; Radhika, D.; Nandi, Anuj; Girish, V.; Agarwal, Vivek Kumar; Kushwaha, Ankur; Iyer, Nirmal Kumar
2017-10-01
Scanning Sky Monitor (SSM) onboard AstroSat is an Xray sky monitor in the soft X-ray band designed with a large field of view to detect and locate transient X-ray sources and alert the astronomical community about interesting phenomena in the X-ray sky. SSM comprises position sensitive proportional counters with 1D coded mask for imaging. There are three detector units mounted on a platform capable of rotation which helps covering about 50% of the sky in one full rotation. This paper discusses the elaborate details of the instrument and few immediate results from the instrument after launch.
Atmospheric water vapour over oceans from SSM/I measurements
NASA Technical Reports Server (NTRS)
Schluessel, Peter; Emery, William J.
1990-01-01
A statistical retrieval technique is developed to derive the atmospheric water vapor column content from the Special Sensor Microwave/Imager (SSM/I) measurements. The radiometer signals are simulated by means of radiative-transfer calculations for a large set of atmospheric/oceanic situations. These simulated responses are subsequently summarized by multivariate analyses, giving water-vapor coefficients and error estimates. Radiative-transfer calculations show that the SSM/I microwave imager can detect atmospheric water vapor structures with an accuracy from 0.145 to 0.17 g/sq cm. The accuracy of the method is confirmed by globally distributed match-ups with radiosonde measurements.
Rainfall Estimates from the TMI and the SSM/I
NASA Technical Reports Server (NTRS)
Hong, Ye; Kummerow, Christian D.; Olson, William S.; Viltard, Nicolas
1999-01-01
The Tropical Rainfall Measuring Mission (TRMM), which is a joint Japan-U.S. Earth observing satellite, has been successfully launched from Japan on November 27, 1997. The main purpose of the TRMM is to measure quantitatively rainfall over the tropics for the research of climate and weather. One of three rainfall measuring instruments abroad the TRMM is the high resolution TRMM Microwave Imager (TMI). The TMI instrument is essentially the copy of the SSM/I with a dual-polarized pair of 10.7 GHz channels added to increase the dynamic range of rainfall estimates. In addition, the 21.3 GHz water vapor absorption channel is designed in the TMI as opposed to the 22.235 GHz in the SSM/I to avoid saturation in the tropics. This paper will present instantaneous rain rates estimated from the coincident TMI and SSM/I observations. The algorithm for estimating instantaneous rainfall rates from both sensors is the Goddard Profiling algorithm (Gprof). The Gprof algorithm is a physically based, multichannel rainfall retrieval algorithm, The algorithm is very portable and can be used for various sensors with different channels and resolutions. The comparison of rain rates estimated from TMI and SSM/I on the same rain regions will be performed. The results from the comparison and the insight of tile retrieval algorithm will be given.
Tsai, Tsung-Yuan; Li, Jing-Sheng; Wang, Shaobai; Li, Pingyue; Kwon, Young-Min; Li, Guoan
2013-01-01
The statistical shape model (SSM) method that uses 2D images of the knee joint to predict the 3D joint surface model has been reported in literature. In this study, we constructed a SSM database using 152 human CT knee joint models, including the femur, tibia and patella and analyzed the characteristics of each principal component of the SSM. The surface models of two in vivo knees were predicted using the SSM and their 2D bi-plane fluoroscopic images. The predicted models were compared to their CT joint models. The differences between the predicted 3D knee joint surfaces and the CT image-based surfaces were 0.30 ± 0.81 mm, 0.34 ± 0.79 mm and 0.36 ± 0.59 mm for the femur, tibia and patella, respectively (average ± standard deviation). The computational time for each bone of the knee joint was within 30 seconds using a personal computer. The analysis of this study indicated that the SSM method could be a useful tool to construct 3D surface models of the knee with sub-millimeter accuracy in real time. Thus it may have a broad application in computer assisted knee surgeries that require 3D surface models of the knee. PMID:24156375
Liu, Xinming; Shaw, Chris C; Wang, Tianpeng; Chen, Lingyun; Altunbas, Mustafa C; Kappadath, S Cheenu
2006-02-28
We developed and investigated a scanning sampled measurement (SSM) technique for scatter measurement and correction in cone beam breast CT imaging. A cylindrical polypropylene phantom (water equivalent) was mounted on a rotating table in a stationary gantry experimental cone beam breast CT imaging system. A 2-D array of lead beads, with the beads set apart about ~1 cm from each other and slightly tilted vertically, was placed between the object and x-ray source. A series of projection images were acquired as the phantom is rotated 1 degree per projection view and the lead beads array shifted vertically from one projection view to the next. A series of lead bars were also placed at the phantom edge to produce better scatter estimation across the phantom edges. Image signals in the lead beads/bars shadow were used to obtain sampled scatter measurements which were then interpolated to form an estimated scatter distribution across the projection images. The image data behind the lead bead/bar shadows were restored by interpolating image data from two adjacent projection views to form beam-block free projection images. The estimated scatter distribution was then subtracted from the corresponding restored projection image to obtain the scatter removed projection images.Our preliminary experiment has demonstrated that it is feasible to implement SSM technique for scatter estimation and correction for cone beam breast CT imaging. Scatter correction was successfully performed on all projection images using scatter distribution interpolated from SSM and restored projection image data. The resultant scatter corrected projection image data resulted in elevated CT number and largely reduced the cupping effects.
Nipple-Sparing Mastectomy is Not Associated with a Delay of Adjuvant Treatment.
Albright, Emily L; Schroeder, Mary C; Foster, Kendra; Sugg, Sonia L; Erdahl, Lillian M; Weigel, Ronald J; Lizarraga, Ingrid M
2018-07-01
High-volume single-institution studies support the oncologic safety of nipple sparing mastectomy (NSM). Concerns remain regarding the increased potential for complications, recurrence, and delays to subsequent adjuvant therapy. A national database was used to examine treatment and outcomes for NSM patients. Women undergoing unilateral NSM or skin sparing mastectomy (SSM) for stage 0-4 breast cancer from 2004 to 2013 were identified from the National Cancer Database. Demographic and oncologic characteristics, short-term outcomes and time to local and systemic treatment were compared. NSM was performed on 8173 patients: 8.7% were node positive, and for stage 1-4 disease, 10.6% were triple negative (TN) and 15.3% were HER2-positive. NSM patients were less likely than SSM patients to receive chemotherapy [CT] (37.4 vs. 43.4%) or radiation [PMRT] (15.6 vs. 16.9%), and were also more likely to present with clinically early-stage disease. NSM patients with high-risk features were more likely to receive CT in the neoadjuvant [NCT] than adjuvant setting [AC] (OR 3.76, 1.81, and 1.99 for clinical N2/3, TN, and HER2-positive disease, all p < 0.001). On multivariate analysis, NSM patients had a higher rate of pathologic complete response [pCR] (OR 1.41, p < 0.001). Readmission rate, positive margin rate and time to CT, PMRT or hormonal therapy were not increased for NSM compared to SSM patients. Over one third of NSM patients received chemotherapy and/or radiation. NSM patients with high-risk features were more likely to receive NAC and obtain a pCR. NSM patients did not experience worse outcomes or delayed adjuvant therapy compared to SSM.
Hoenner, Xavier; Whiting, Scott D; Hindell, Mark A; McMahon, Clive R
2012-01-01
Accurately quantifying animals' spatial utilisation is critical for conservation, but has long remained an elusive goal due to technological impediments. The Argos telemetry system has been extensively used to remotely track marine animals, however location estimates are characterised by substantial spatial error. State-space models (SSM) constitute a robust statistical approach to refine Argos tracking data by accounting for observation errors and stochasticity in animal movement. Despite their wide use in ecology, few studies have thoroughly quantified the error associated with SSM predicted locations and no research has assessed their validity for describing animal movement behaviour. We compared home ranges and migratory pathways of seven hawksbill sea turtles (Eretmochelys imbricata) estimated from (a) highly accurate Fastloc GPS data and (b) locations computed using common Argos data analytical approaches. Argos 68(th) percentile error was <1 km for LC 1, 2, and 3 while markedly less accurate (>4 km) for LC ≤ 0. Argos error structure was highly longitudinally skewed and was, for all LC, adequately modelled by a Student's t distribution. Both habitat use and migration routes were best recreated using SSM locations post-processed by re-adding good Argos positions (LC 1, 2 and 3) and filtering terrestrial points (mean distance to migratory tracks ± SD = 2.2 ± 2.4 km; mean home range overlap and error ratio = 92.2% and 285.6 respectively). This parsimonious and objective statistical procedure however still markedly overestimated true home range sizes, especially for animals exhibiting restricted movements. Post-processing SSM locations nonetheless constitutes the best analytical technique for remotely sensed Argos tracking data and we therefore recommend using this approach to rework historical Argos datasets for better estimation of animal spatial utilisation for research and evidence-based conservation purposes.
Alós, Josep; Palmer, Miquel; Balle, Salvador; Arlinghaus, Robert
2016-01-01
State-space models (SSM) are increasingly applied in studies involving biotelemetry-generated positional data because they are able to estimate movement parameters from positions that are unobserved or have been observed with non-negligible observational error. Popular telemetry systems in marine coastal fish consist of arrays of omnidirectional acoustic receivers, which generate a multivariate time-series of detection events across the tracking period. Here we report a novel Bayesian fitting of a SSM application that couples mechanistic movement properties within a home range (a specific case of random walk weighted by an Ornstein-Uhlenbeck process) with a model of observational error typical for data obtained from acoustic receiver arrays. We explored the performance and accuracy of the approach through simulation modelling and extensive sensitivity analyses of the effects of various configurations of movement properties and time-steps among positions. Model results show an accurate and unbiased estimation of the movement parameters, and in most cases the simulated movement parameters were properly retrieved. Only in extreme situations (when fast swimming speeds are combined with pooling the number of detections over long time-steps) the model produced some bias that needs to be accounted for in field applications. Our method was subsequently applied to real acoustic tracking data collected from a small marine coastal fish species, the pearly razorfish, Xyrichtys novacula. The Bayesian SSM we present here constitutes an alternative for those used to the Bayesian way of reasoning. Our Bayesian SSM can be easily adapted and generalized to any species, thereby allowing studies in freely roaming animals on the ecological and evolutionary consequences of home ranges and territory establishment, both in fishes and in other taxa. PMID:27119718
Passive Standoff Super Resolution Imaging using Spatial-Spectral Multiplexing
2017-08-14
94 5.0 Four -Dimensional Object-Space Data Reconstruction Using Spatial...103 5.3 Four -dimensional scene reconstruction using SSM...transitioning to systems based on spectrally resolved longitudinal spatial coherence interferometry. This document also includes research related to four
40 CFR Table 8 to Subpart Uuuu of... - Reporting Requirements
Code of Federal Regulations, 2013 CFR
2013-07-01
... with your SSM plan, then the report must contain the information specified in § 63.10(d)(5)(i); 6. if... not consistent with your SSM plan, then the report must contain the information specified in § 63.10(d...
40 CFR Table 8 to Subpart Uuuu of... - Reporting Requirements
Code of Federal Regulations, 2012 CFR
2012-07-01
... with your SSM plan, then the report must contain the information specified in § 63.10(d)(5)(i); 6. if... not consistent with your SSM plan, then the report must contain the information specified in § 63.10(d...
40 CFR Table 8 to Subpart Uuuu of... - Reporting Requirements
Code of Federal Regulations, 2014 CFR
2014-07-01
... with your SSM plan, then the report must contain the information specified in § 63.10(d)(5)(i); 6. if... not consistent with your SSM plan, then the report must contain the information specified in § 63.10(d...
40 CFR 63.8075 - What reports must I submit and when?
Code of Federal Regulations, 2012 CFR
2012-07-01
... in referenced subparts F, SS, TT, UU, and WW of this part 63. (5) For each SSM during which excess... information in paragraphs (e)(6)(iii)(A) through (K) of this section. This includes periods of SSM. (A) The...
Virtual reconstruction of glenoid bone defects using a statistical shape model.
Plessers, Katrien; Vanden Berghe, Peter; Van Dijck, Christophe; Wirix-Speetjens, Roel; Debeer, Philippe; Jonkers, Ilse; Vander Sloten, Jos
2018-01-01
Description of the native shape of a glenoid helps surgeons to preoperatively plan the position of a shoulder implant. A statistical shape model (SSM) can be used to virtually reconstruct a glenoid bone defect and to predict the inclination, version, and center position of the native glenoid. An SSM-based reconstruction method has already been developed for acetabular bone reconstruction. The goal of this study was to evaluate the SSM-based method for the reconstruction of glenoid bone defects and the prediction of native anatomic parameters. First, an SSM was created on the basis of 66 healthy scapulae. Then, artificial bone defects were created in all scapulae and reconstructed using the SSM-based reconstruction method. For each bone defect, the reconstructed surface was compared with the original surface. Furthermore, the inclination, version, and glenoid center point of the reconstructed surface were compared with the original parameters of each scapula. For small glenoid bone defects, the healthy surface of the glenoid was reconstructed with a root mean square error of 1.2 ± 0.4 mm. Inclination, version, and glenoid center point were predicted with an accuracy of 2.4° ± 2.1°, 2.9° ± 2.2°, and 1.8 ± 0.8 mm, respectively. The SSM-based reconstruction method is able to accurately reconstruct the native glenoid surface and to predict the native anatomic parameters. Based on this outcome, statistical shape modeling can be considered a successful technique for use in the preoperative planning of shoulder arthroplasty. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.
Thiagarajah, Shankar; Wilkinson, J. Mark; Panoutsopoulou, Kalliope; Day‐Williams, Aaron G.; Cootes, Timothy F.; Wallis, Gillian A.; Loughlin, John; Arden, Nigel; Birrell, Fraser; Carr, Andrew; Chapman, Kay; Deloukas, Panos; Doherty, Michael; McCaskie, Andrew; Ollier, William E. R.; Rai, Ashok; Ralston, Stuart H.; Spector, Timothy D.; Valdes, Ana M.; Wallis, Gillian A.; Mark Wilkinson, J.; Zeggini, Eleftheria
2015-01-01
Objective To test whether previously reported hip morphology or osteoarthritis (OA) susceptibility loci are associated with proximal femur shape as represented by statistical shape model (SSM) modes and as univariate or multivariate quantitative traits. Methods We used pelvic radiographs and genotype data from 929 subjects with unilateral hip OA who had been recruited previously for the Arthritis Research UK Osteoarthritis Genetics Consortium genome‐wide association study. We built 3 SSMs capturing the shape variation of the OA‐unaffected proximal femur in the entire mixed‐sex cohort and for male/female‐stratified cohorts. We selected 41 candidate single‐nucleotide polymorphisms (SNPs) previously reported as being associated with hip morphology (for replication analysis) or OA (for discovery analysis) and for which genotype data were available. We performed 2 types of analysis for genotype–phenotype associations between these SNPs and the modes of the SSMs: 1) a univariate analysis using individual SSM modes and 2) a multivariate analysis using combinations of SSM modes. Results The univariate analysis identified association between rs4836732 (within the ASTN2 gene) and mode 5 of the female SSM (P = 0.0016) and between rs6976 (within the GLT8D1 gene) and mode 7 of the mixed‐sex SSM (P = 0.0003). The multivariate analysis identified association between rs5009270 (near the IFRD1 gene) and a combination of modes 3, 4, and 9 of the mixed‐sex SSM (P = 0.0004). Evidence of associations remained significant following adjustment for multiple testing. All 3 SNPs had previously been associated with hip OA. Conclusion These de novo findings suggest that rs4836732, rs6976, and rs5009270 may contribute to hip OA susceptibility by altering proximal femur shape. PMID:25939412
Lee, Sae Byul; Lee, Jong Won; Kim, Hee Jeong; Ko, Beom Seok; Son, Byung Ho; Eom, Jin Sup; Lee, Taik Jong; Ahn, Sei-Hyun
2018-05-01
To evaluate the oncological outcomes of patients with breast cancer after nipple-sparing mastectomy (NSM)/skin-sparing mastectomy (SSM), followed by immediate reconstruction, as compared to conventional mastectomy (CM).SSM/NSM has been increasingly used to treat women with breast cancer who wish to preserve the overlying breast skin, but concern exist regarding its oncological safety due to the potential for residual breast tissue. We report our experience performing SSM/NSM for breast cancer treatment compared to CM with a long follow-up period.All consecutive patients who underwent mastectomy for breast cancer at Asan Medical Center between January 1993 and December 2008 were identified by retrospective medical chart review. The patients who underwent NSM/SSM, followed by immediate breast reconstruction with a pedicled transverse rectus abdominis musculocutaneous flap (TRAM), were compared to the patients who underwent CM in terms of breast-cancer specific survival (BCSS) rate, distant metastasis-free survival (DMFS) rate, and local recurrence (LR) rate.During the study period, 6028 patients underwent mastectomy for breast cancer. Of these, 1032 and 4996 underwent NSM/SSM with TRAM and CM, respectively. Their median follow-up durations were 94.4 (range, 8.1-220.2) and 110.8 (range, 6.1-262.0) months, respectively. Their 5 year BCSS rates were 95.4% and 88.1%, respectively (log-rank, P < .001). Their 5 year DMFS rates were 93.0% and 85.6%, respectively (log-rank, P < .001).Relative to CM, NSM/SSM, followed by immediate breast reconstruction, may be a viable and oncologically safe surgical treatment in selected patients with breast cancer.
Guillemot, Joannès; Delpierre, Nicolas; Vallet, Patrick; François, Christophe; Martin-StPaul, Nicolas K; Soudani, Kamel; Nicolas, Manuel; Badeau, Vincent; Dufrêne, Eric
2014-09-01
The structure of a forest stand, i.e. the distribution of tree size features, has strong effects on its functioning. The management of the structure is therefore an important tool in mitigating the impact of predicted changes in climate on forests, especially with respect to drought. Here, a new functional-structural model is presented and is used to assess the effects of management on forest functioning at a national scale. The stand process-based model (PBM) CASTANEA was coupled to a stand structure module (SSM) based on empirical tree-to-tree competition rules. The calibration of the SSM was based on a thorough analysis of intersite and interannual variability of competition asymmetry. The coupled CASTANEA-SSM model was evaluated across France using forest inventory data, and used to compare the effect of contrasted silvicultural practices on simulated stand carbon fluxes and growth. The asymmetry of competition varied consistently with stand productivity at both spatial and temporal scales. The modelling of the competition rules enabled efficient prediction of changes in stand structure within the CASTANEA PBM. The coupled model predicted an increase in net primary productivity (NPP) with management intensity, resulting in higher growth. This positive effect of management was found to vary at a national scale across France: the highest increases in NPP were attained in forests facing moderate to high water stress; however, the absolute effect of management on simulated stand growth remained moderate to low because stand thinning involved changes in carbon allocation at the tree scale. This modelling approach helps to identify the areas where management efforts should be concentrated in order to mitigate near-future drought impact on national forest productivity. Around a quarter of the French temperate oak and beech forests are currently in zones of high vulnerability, where management could thus mitigate the influence of climate change on forest yield.
1983-08-10
One of the main components of the Hubble Space Telescope (HST) is the Solar Array Drive Electronics (SADE) system. This system interfaces with the Support System Module (SSM) for exchange of operational commands and telemetry data. SADE operates and controls the Solar Array Drive Mechanisms (SADM) for the orientation of the Solar Array Drive (SAD). It also monitors the position of the arrays and the temperature of the SADM. During the first HST servicing mission, the astronauts replaced the SADE component because of some malfunctions. This turned out to be a very challenging extravehicular activity (EVA). Two transistors and two diodes had been thermally stressed with the conformal coating discolored and charred. Soldered cornections became molten and reflowed between the two diodes. The failed transistors gave no indication of defective construction. All repairs were made and the HST was redeposited into orbit. Prior to undertaking this challenging mission, the orbiter's crew trained at Marshall Space Flight Center's (MSFC) Neutral Buoyancy Simulator (NBS) to prepare themselves for working in a low gravity environment. They also practiced replacing HST parts and exercised maneuverability and equipment handling. Pictured is an astronaut practicing climbing a space platform that was necessary in making repairs on the HST.
Neutral Buoyancy Simulator - SADE NBS Test
NASA Technical Reports Server (NTRS)
1983-01-01
One of the main components of the Hubble Space Telescope (HST) is the Solar Array Drive Electronics (SADE) system. This system interfaces with the Support System Module (SSM) for exchange of operational commands and telemetry data. SADE operates and controls the Solar Array Drive Mechanisms (SADM) for the orientation of the Solar Array Drive (SAD). It also monitors the position of the arrays and the temperature of the SADM. During the first HST servicing mission, the astronauts replaced the SADE component because of some malfunctions. This turned out to be a very challenging extravehicular activity (EVA). Two transistors and two diodes had been thermally stressed with the conformal coating discolored and charred. Soldered cornections became molten and reflowed between the two diodes. The failed transistors gave no indication of defective construction. All repairs were made and the HST was redeposited into orbit. Prior to undertaking this challenging mission, the orbiter's crew trained at Marshall Space Flight Center's (MSFC) Neutral Buoyancy Simulator (NBS) to prepare themselves for working in a low gravity environment. They also practiced replacing HST parts and exercised maneuverability and equipment handling. Pictured is an astronaut practicing climbing a space platform that was necessary in making repairs on the HST.
Neutral Buoyancy Simulator-NB50B-SADE Training Exercises
NASA Technical Reports Server (NTRS)
1983-01-01
One of the main components of the Hubble Space Telescope (HST) is the Solar Array Drive Electronics (SADE) system. This system interfaces with the Support System Module (SSM) for exchange of operational commands and telemetry data. SADE operates and controls the Solar Array Drive Mechanisms (SADM) for the orientation of the Solar Array Drive (SAD). It also monitors the position of the arrays and the temperature of the SADM. During the first HST servicing mission, the astronauts replaced the SADE component because of some malfunctions. This turned out to be a very challenging extravehicular activity (EVA). Two transistors and two diodes had been thermally stressed with the conformal coating discolored and charred. Soldered cornections became molten and reflowed between the two diodes. The failed transistors gave no indication of defective construction. All repairs were made and the HST was redeposited into orbit. Prior to undertaking this challenging mission, the orbiter's crew trained at Marshall Space Flight Center's (MSFC) Neutral Buoyancy Simulator (NBS) to prepare themselves for working in a low gravity environment. They also practiced replacing HST parts and exercised maneuverability and equipment handling. Pictured are crew members practicing on a space platform.
40 CFR 63.9340 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2012 CFR
2012-07-01
... with §§ 63.6(e) and 63.7(e)(1), deviations that occur during a period of SSM of control devices and... deviations that occur during a period of SSM of control devices and associated monitoring equipment are...
40 CFR 63.9340 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2013 CFR
2013-07-01
... with §§ 63.6(e) and 63.7(e)(1), deviations that occur during a period of SSM of control devices and... deviations that occur during a period of SSM of control devices and associated monitoring equipment are...
Unification of Gauge Couplings in the E{sub 6}SSM
DOE Office of Scientific and Technical Information (OSTI.GOV)
Athron, P.; King, S. F.; Luo, R.
2010-02-10
We argue that in the two--loop approximation gauge coupling unification in the exceptional supersymmetric standard model (E{sub 6}SSM) can be achieved for any phenomenologically reasonable value of alpha{sub 3}(M{sub Z}) consistent with the experimentally measured central value.
40 CFR 63.9340 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2014 CFR
2014-07-01
... with §§ 63.6(e) and 63.7(e)(1), deviations that occur during a period of SSM of control devices and... deviations that occur during a period of SSM of control devices and associated monitoring equipment are...
40 CFR 63.9340 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2010 CFR
2010-07-01
... with §§ 63.6(e) and 63.7(e)(1), deviations that occur during a period of SSM of control devices and... deviations that occur during a period of SSM of control devices and associated monitoring equipment are...
40 CFR 63.9340 - How do I demonstrate continuous compliance with the emission limitations?
Code of Federal Regulations, 2011 CFR
2011-07-01
... with §§ 63.6(e) and 63.7(e)(1), deviations that occur during a period of SSM of control devices and... deviations that occur during a period of SSM of control devices and associated monitoring equipment are...
On February 12, 2013, the U.S. Environmental Protection Agency (EPA) proposed a rule that would ensure states have plans in place that require industrial facilities across the country to follow air pollution rules during SSM operations.
On September 5, 2014, EPA proposed a rule supplementing and revising its February 2013 proposal to ensure states have plans in place that require industrial facilities across the country to follow air pollution rules during SSM operations.
NASA Technical Reports Server (NTRS)
Petty, Grant W.; Katsaros, Kristina B.
1992-01-01
A detailed parameterization is developed for the contribution of the nonprecipitating atmosphere to the microwave brightness temperatures observed by the Special Sensor Microwave/Imager (SSM/I). The atmospheric variables considered include the viewing angle, the integrated water vapor amount and scale height, the effective tropospheric lapse rate and near-surface temperature, the total cloud liquid water, the effective cloud height, and the surface pressure. The dependence of the radiative variables on meteorological variables is determined for each of the SSM/I frequencies 19.35, 22.235, 37.0, and 85.5 GHz, based on the values computed from 16,893 maritime temperature and humidity profiles representing all latitude belts and all seasons. A comparison of the predicted brightness temperatures with brightness temperatures obtained by direct numerical integration of the radiative transfer equation for the radiosonde-profile dataset yielded rms differences well below 1 K for all four SSM/I frequencies.
Achieving Systemic Information Operations for Australian Defence
1999-10-01
is Checkland’s Soft Systems Methodology and some emphasis is placed on this methodology in the present document. Other soft methodologies also exist...Warfare 2 2 Proposed Development Method 5 3 Soft Systems Methodology 8 DSTO-TN-0235 DSTO-TN-0235 1 Introduction Widespread concern...that will be adopted will be one chosen from the burgeoning field of soft systems theory, for example Checkland’s Soft Systems Methodology (SSM)[8
Do, Hoang Dang Khoa; Kim, Joo-Hwan
2017-01-01
Chloroplast genomes (cpDNA) are highly valuable resources for evolutionary studies of angiosperms, since they are highly conserved, are small in size, and play critical roles in plants. Slipped-strand mispairing (SSM) was assumed to be a mechanism for generating repeat units in cpDNA. However, research on the employment of different small repeated sequences through SSM events, which may induce the accumulation of distinct types of repeats within the same region in cpDNA, has not been documented. Here, we sequenced two chloroplast genomes from the endemic species Heloniopsis tubiflora (Korea) and Xerophyllum tenax (USA) to cover the gap between molecular data and explore "hot spots" for genomic events in Melanthiaceae. Comparative analysis of 23 complete cpDNA sequences revealed that there were different stages of deletion in the rps16 region across the Melanthiaceae. Based on the partial or complete loss of rps16 gene in cpDNA, we have firstly reported potential molecular markers for recognizing two sections ( Veratrum and Fuscoveratrum ) of Veratrum . Melathiaceae exhibits a significant change in the junction between large single copy and inverted repeat regions, ranging from trnH_GUG to a part of rps3 . Our results show an accumulation of tandem repeats in the rpl23-ycf2 regions of cpDNAs. Small conserved sequences exist and flank tandem repeats in further observation of this region across most of the examined taxa of Liliales. Therefore, we propose three scenarios in which different small repeated sequences were used during SSM events to generate newly distinct types of repeats. Occasionally, prior to the SSM process, point mutation event and double strand break repair occurred and induced the formation of initial repeat units which are indispensable in the SSM process. SSM may have likely occurred more frequently for short repeats than for long repeat sequences in tribe Parideae (Melanthiaceae, Liliales). Collectively, these findings add new evidence of dynamic results from SSM in chloroplast genomes which can be useful for further evolutionary studies in angiosperms. Additionally, genomics events in cpDNA are potential resources for mining molecular markers in Liliales.
van IJsseldijk, E A; Valstar, E R; Stoel, B C; Nelissen, R G H H; Baka, N; Van't Klooster, R; Kaptein, B L
2016-08-01
An important measure for the diagnosis and monitoring of knee osteoarthritis is the minimum joint space width (mJSW). This requires accurate alignment of the x-ray beam with the tibial plateau, which may not be accomplished in practice. We investigate the feasibility of a new mJSW measurement method from stereo radiographs using 3D statistical shape models (SSM) and evaluate its sensitivity to changes in the mJSW and its robustness to variations in patient positioning and bone geometry. A validation study was performed using five cadaver specimens. The actual mJSW was varied and images were acquired with variation in the cadaver positioning. For comparison purposes, the mJSW was also assessed from plain radiographs. To study the influence of SSM model accuracy, the 3D mJSW measurement was repeated with models from the actual bones, obtained from CT scans. The SSM-based measurement method was more robust (consistent output for a wide range of input data/consistent output under varying measurement circumstances) than the conventional 2D method, showing that the 3D reconstruction indeed reduces the influence of patient positioning. However, the SSM-based method showed comparable sensitivity to changes in the mJSW with respect to the conventional method. The CT-based measurement was more accurate than the SSM-based measurement (smallest detectable differences 0.55 mm versus 0. 82 mm, respectively). The proposed measurement method is not a substitute for the conventional 2D measurement due to limitations in the SSM model accuracy. However, further improvement of the model accuracy and optimisation technique can be obtained. Combined with the promising options for applications using quantitative information on bone morphology, SSM based 3D reconstructions of natural knees are attractive for further development.Cite this article: E. A. van IJsseldijk, E. R. Valstar, B. C. Stoel, R. G. H. H. Nelissen, N. Baka, R. van't Klooster, B. L. Kaptein. Three dimensional measurement of minimum joint space width in the knee from stereo radiographs using statistical shape models. Bone Joint Res 2016;320-327. DOI: 10.1302/2046-3758.58.2000626. © 2016 van IJsseldijk et al.
Pons, Mònica; Santos, Begoña; Simón-Talero, Macarena; Ventura-Cots, Meritxell; Riveiro-Barciela, Mar; Esteban, Rafael; Augustin, Salvador; Genescà, Joan
2017-08-01
We aimed to investigate the early changes in liver and spleen stiffness measurement (LSM, SSM) in hepatitis C virus (HCV) patients with compensated advanced chronic liver disease (cACLD) treated with new antivirals (DAA) to elucidate factors determining the initial change in stiffness and its implications for the long-term follow up of HCV-cured patients. A total of 41 patients with cACLD who started DAA therapy underwent LSM and SSM at baseline, week 4, end of treatment (EOT), 24 and 48 weeks of follow up using transient elastography. LSM improved rapidly during the first 4 weeks of treatment (baseline: 20.8kPa; week 4: 17.5kPa, p = 0.002), with no significant changes between week 4 and EOT (18.3kPa, p = 0.444) and between EOT and 48-week follow up (14.3kPa, p = 0.148). Likewise, SSM improved rapidly (baseline: 45.7kPa; week 4: 33.8kPa, p = 0.047), with no significant changes between week 4 and EOT (30.8kPa, p = 0.153) and between EOT and 48-week follow up (31.2kPa, p = 0.317). A higher decrease in LSM was observed in patients with baseline ALT ⩾ twofold upper limit normal (2 × ULN) than in those with ALT < 2 × ULN (-5.7kPa versus -1.6kPa). Patients who presented a decrease in LSM ⩾ 10% during treatment compared with those with LSM < 10% decrease, showed lower SSM values, higher platelet counts and lower bilirubin levels at 24-week follow up. Those with decrease in SSM ⩾ 10%, presented a higher increase in platelets than those with SSM < 10% change ( p = 0.015). LSM and SSM decrease very rapidly during DAA treatment in cACLD patients suggesting that it most probably reflects a reduction in inflammation rather than in fibrosis. cACLD patients should be maintained under surveillance independently of stiffness changes, because advanced fibrosis can still be present.
Evaluating new SMAP soil moisture for drought monitoring in the rangelands of the US High Plains
Velpuri, Naga Manohar; Senay, Gabriel B.; Morisette, Jeffrey T.
2016-01-01
Level 3 soil moisture datasets from the recently launched Soil Moisture Active Passive (SMAP) satellite are evaluated for drought monitoring in rangelands.Validation of SMAP soil moisture (SSM) with in situ and modeled estimates showed high level of agreement.SSM showed the highest correlation with surface soil moisture (0-5 cm) and a strong correlation to depths up to 20 cm.SSM showed a reliable and expected response of capturing seasonal dynamics in relation to precipitation, land surface temperature, and evapotranspiration.Further evaluation using multi-year SMAP datasets is necessary to quantify the full benefits and limitations for drought monitoring in rangelands.
NASA Technical Reports Server (NTRS)
Carr, M.; Tang, W.; Liu, W. T.
2002-01-01
We compare here the air-sea exchange coefficient for C02 estimated with monthly mean wind speed measured by the Special Sensing Microwave Imager (SSM/I), Ks , and by the scatterometer QuikSCAT, Kq, for the year 2000.
Colecchia, Antonio; Ravaioli, Federico; Marasco, Giovanni; Colli, Agostino; Dajti, Elton; Di Biase, Anna Rita; Bacchi Reggiani, Maria Letizia; Berzigotti, Annalisa; Pinzani, Massimo; Festi, Davide
2018-05-03
Recently, Baveno VI guidelines suggested that esophagogastroduodenoscopy (EGD) can be avoided in patients with compensated advanced chronic liver disease (cACLD) who have a liver stiffness measurement (LSM) <20 kPa and platelet count >150,000/mm 3 . We aimed to: assess the performance of spleen stiffness measurement (SSM) in ruling out patients with high-risk varices (HRV); validate Baveno VI criteria in a large population and assess how the sequential use of Baveno VI criteria and SSM could safely avoid the need for endoscopy. We retrospectively analyzed 498 patients with cACLD who had undergone LSM/SSM by transient elastography (TE) (FibroScan®), platelet count and EGDs from 2012 to 2016 referred to our tertiary centre. The new combined model was validated internally by a split-validation method, and externally in a prospective multicentre cohort of 115 patients. SSM, LSM, platelet count and Child-Pugh-B were independent predictors of HRV. Applying the newly identified SSM cut-off (≤46 kPa) or Baveno VI criteria, 35.8% and 21.7% of patients in the internal validation cohort could have avoided EGD, with only 2% of HRVs being missed with either model. The combination of SSM with Baveno VI criteria would have avoided an additional 22.5% of EGDs, reaching a final value of 43.8% spared EGDs, with <5% missed HRVs. Results were confirmed in the prospective external validation cohort, as the combined Baveno VI/SSM ≤46 model would have safely spared (0 HRV missed) 37.4% of EGDs, compared to 16.5% when using the Baveno VI criteria alone. A non-invasive prediction model combining SSM with Baveno VI criteria may be useful to rule out HRV and could make it possible to avoid a significantly larger number of unnecessary EGDs compared to Baveno VI criteria only. Spleen stiffness measurement assessed by transient elastography, the most widely used elastography technique, is a non-invasive technique that can help the physician to better stratify the degree of portal hypertension and the risk of esophageal varices in patients with compensated advanced chronic liver disease. Performing spleen stiffness measurement together with liver stiffness measurement during the same examination is simple and fast and this sequential model can identify a greater number of patients that can safely avoid endoscopy, which is an invasive and expensive examination. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.
Secondary School Advanced Mathematics, Chapter 8, Systems of Equations. Student's Text.
ERIC Educational Resources Information Center
Stanford Univ., CA. School Mathematics Study Group.
This text is the last of five in the Secondary School Advanced Mathematics (SSAM) series which was designed to meet the needs of students who have completed the Secondary School Mathematics (SSM) program, and wish to continue their study of mathematics. In this volume the solution of systems of linear and quadratic equations and inequalities in…
Learning to Support Learning Together: An Experience with the Soft Systems Methodology
ERIC Educational Resources Information Center
Sanchez, Adolfo; Mejia, Andres
2008-01-01
An action research approach called soft systems methodology (SSM) was used to foster organisational learning in a school regarding the role of the learning support department within the school and its relation with the normal teaching-learning activities. From an initial situation of lack of coordination as well as mutual misunderstanding and…
Spectrum-shape method and the next-to-leading-order terms of the β -decay shape factor
NASA Astrophysics Data System (ADS)
Haaranen, M.; Kotila, J.; Suhonen, J.
2017-02-01
Effective values of the axial-vector coupling constant gA have lately attracted much attention due to the prominent role of gA in determining the half-lives of double β decays, in particular their neutrinoless mode. The half-life method, i.e., comparing the calculated half-lives to the corresponding experimental ones, is the most widely used method to access the effective values of gA. The present paper investigates the possibilities offered by a complementary method: the spectrum-shape method (SSM). In the SSM, comparison of the shapes of the calculated and measured β electron spectra of forbidden nonunique β decays yields information on the magnitude of gA. In parallel, we investigate the impact of the next-to-leading-order terms of the β -decay shape function and the radiative corrections on the half-life method and the SSM by analyzing the fourfold forbidden decays of 113Cd and 115In by using three nuclear-structure theory frameworks; namely, the nuclear shell model, the microscopic interacting boson-fermion model, and the microscopic quasiparticle-phonon model. The three models yield a consistent result, gA≈0.92 , when the SSM is applied to the decay of 113Cd for which β -spectrum data are available. At the same time the half-life method yields results which are in tension with each other and the SSM result.
On the assimilation set-up of ASCAT soil moisture data for improving streamflow catchment simulation
NASA Astrophysics Data System (ADS)
Loizu, Javier; Massari, Christian; Álvarez-Mozos, Jesús; Tarpanelli, Angelica; Brocca, Luca; Casalí, Javier
2018-01-01
Assimilation of remotely sensed surface soil moisture (SSM) data into hydrological catchment models has been identified as a means to improve streamflow simulations, but reported results vary markedly depending on the particular model, catchment and assimilation procedure used. In this study, the influence of key aspects, such as the type of model, re-scaling technique and SSM observation error considered, were evaluated. For this aim, Advanced SCATterometer ASCAT-SSM observations were assimilated through the ensemble Kalman filter into two hydrological models of different complexity (namely MISDc and TOPLATS) run on two Mediterranean catchments of similar size (750 km2). Three different re-scaling techniques were evaluated (linear re-scaling, variance matching and cumulative distribution function matching), and SSM observation error values ranging from 0.01% to 20% were considered. Four different efficiency measures were used for evaluating the results. Increases in Nash-Sutcliffe efficiency (0.03-0.15) and efficiency indices (10-45%) were obtained, especially when linear re-scaling and observation errors within 4-6% were considered. This study found out that there is a potential to improve streamflow prediction through data assimilation of remotely sensed SSM in catchments of different characteristics and with hydrological models of different conceptualizations schemes, but for that, a careful evaluation of the observation error and re-scaling technique set-up utilized is required.
Tsai, Tsung-Yuan; Li, Jing-Sheng; Wang, Shaobai; Li, Pingyue; Kwon, Young-Min; Li, Guoan
2015-01-01
The statistical shape model (SSM) method that uses 2D images of the knee joint to predict the three-dimensional (3D) joint surface model has been reported in the literature. In this study, we constructed a SSM database using 152 human computed tomography (CT) knee joint models, including the femur, tibia and patella and analysed the characteristics of each principal component of the SSM. The surface models of two in vivo knees were predicted using the SSM and their 2D bi-plane fluoroscopic images. The predicted models were compared to their CT joint models. The differences between the predicted 3D knee joint surfaces and the CT image-based surfaces were 0.30 ± 0.81 mm, 0.34 ± 0.79 mm and 0.36 ± 0.59 mm for the femur, tibia and patella, respectively (average ± standard deviation). The computational time for each bone of the knee joint was within 30 s using a personal computer. The analysis of this study indicated that the SSM method could be a useful tool to construct 3D surface models of the knee with sub-millimeter accuracy in real time. Thus, it may have a broad application in computer-assisted knee surgeries that require 3D surface models of the knee.
Stochastic volatility models and Kelvin waves
NASA Astrophysics Data System (ADS)
Lipton, Alex; Sepp, Artur
2008-08-01
We use stochastic volatility models to describe the evolution of an asset price, its instantaneous volatility and its realized volatility. In particular, we concentrate on the Stein and Stein model (SSM) (1991) for the stochastic asset volatility and the Heston model (HM) (1993) for the stochastic asset variance. By construction, the volatility is not sign definite in SSM and is non-negative in HM. It is well known that both models produce closed-form expressions for the prices of vanilla option via the Lewis-Lipton formula. However, the numerical pricing of exotic options by means of the finite difference and Monte Carlo methods is much more complex for HM than for SSM. Until now, this complexity was considered to be an acceptable price to pay for ensuring that the asset volatility is non-negative. We argue that having negative stochastic volatility is a psychological rather than financial or mathematical problem, and advocate using SSM rather than HM in most applications. We extend SSM by adding volatility jumps and obtain a closed-form expression for the density of the asset price and its realized volatility. We also show that the current method of choice for solving pricing problems with stochastic volatility (via the affine ansatz for the Fourier-transformed density function) can be traced back to the Kelvin method designed in the 19th century for studying wave motion problems arising in fluid dynamics.
NASA Astrophysics Data System (ADS)
Miranda Guedes, Rui
2018-02-01
Long-term creep of viscoelastic materials is experimentally inferred through accelerating techniques based on the time-temperature superposition principle (TTSP) or on the time-stress superposition principle (TSSP). According to these principles, a given property measured for short times at a higher temperature or higher stress level remains the same as that obtained for longer times at a lower temperature or lower stress level, except that the curves are shifted parallel to the horizontal axis, matching a master curve. These procedures enable the construction of creep master curves with short-term experimental tests. The Stepped Isostress Method (SSM) is an evolution of the classical TSSP method. Higher reduction of the required number of test specimens to obtain the master curve is achieved by the SSM technique, since only one specimen is necessary. The classical approach, using creep tests, demands at least one specimen per each stress level to produce a set of creep curves upon which TSSP is applied to obtain the master curve. This work proposes an analytical method to process the SSM raw data. The method is validated using numerical simulations to reproduce the SSM tests based on two different viscoelastic models. One model represents the viscoelastic behavior of a graphite/epoxy laminate and the other represents an adhesive based on epoxy resin.
An illustration of whole systems thinking.
Kalim, Kanwal; Carson, Ewart; Cramp, Derek
2006-08-01
The complexity of policy-making in the NHS is such that systemic, holistic thinking is needed if the current government's plans are to be realized. This paper describes systems thinking and illustrates its value in understanding the complexity of the diabetes National Service Framework (NSF); its role in identifying problems and barriers previously not predicted; and in reaching conclusions as to how it should be implemented. The approach adopted makes use of soft systems methodology (SSM) devised by Peter Checkland. This analysis reveals issues relating to human communication, information provision and resource allocation needing to be addressed. From this, desirable and feasible changes are explored as means of achieving a more effective NSF, examining possible changes from technical, organizational, economic and cultural perspectives. As well as testing current health policies and plans, SSM can be used to test the feasibility of new health policies. This is achieved by providing a greater understanding and appreciation of what is happening in the real world and how people work. Soft systems thinking is the best approach, given the complexity of health care. It is a flexible, cost-effective solution, which should be a prerequisite before any new health policy is launched.
NASA Astrophysics Data System (ADS)
Greenwald, Thomas J.; Stephens, Graeme L.; Vonder Haar, Thomas H.; Jackson, Darren L.
1993-10-01
A method of remotely sensing integrated cloud liquid water over the oceans using spaceborne passive measurements from the special sensor microwave/imager (SSM/I) is described. The technique is comprised of a simple physical model that uses the 19.35- and 37-GHz channels of the SSM/I. The most comprehensive validation to date of cloud liquid water estimated from satellites is presented. This is accomplished through a comparison to independent ground-based microwave radiometer measurements of liquid water on San Nicolas Island, over the North Sea, and on Kwajalein and Saipan Islands in the western Pacific. In areas of marine stratocumulus clouds off the coast of California a further comparison is made to liquid water inferred from advanced very high resolution radiometer (AVHRR) visible reflectance measurements. The results are also compared qualitatively with near-coincident satellite imagery and with other existing microwave methods in selected regions. These comparisons indicate that the liquid water amounts derived from the simple scheme are consistent with the ground-based measurements for nonprecipitating cloud systems in the subtropics and middle to high latitudes. The comparison in the tropics, however, was less conclusive. Nevertheless, the retrieval method appears to have general applicability over most areas of the global oceans. An observational measure of the minimum uncertainty in the retrievals is determined in a limited number of known cloud-free areas, where the liquid water amounts are found to have a low variability of 0.016 kg m-2. A simple sensitivity and error analysis suggests that the liquid water estimates have a theoretical relative error typically ranging from about 25% to near 40% depending on the atmospheric/surface conditions and on the amount of liquid water present in the cloud. For the global oceans as a whole the average cloud liquid water is determined to be about 0.08 kg m-2. The major conclusion of this paper is that reasonably accurate amounts of cloud liquid water can be retrieved from SSM/I observations for nonprecipitating cloud systems, particularly in areas of persistent stratocumulus clouds, with less accurate retrievals in tropical regions.
Artificial groundwater treatment: biofilm activity and organic carbon removal performance.
Långmark, Jonas; Storey, Michael V; Ashbolt, Nicholas J; Stenström, Thor Axel
2004-02-01
The artificial recharge of sand aquifers with raw source waters is a means both explored and utilised by many water utilities to meet the future potable water demands for increasing urban populations. The microbial ecology within these systems is however, poorly understood, as is the role that microbial biofilms play in the quality of finished water. Knowledge of the ability of biofilm bacteria to metabolise natural organic matter (NOM) is limited, particularly in respect to the degradation of normally recalcitrant hydrophilic and hydrophobic humic acid fractions by sessile and planktonic microbial consortia within sand aquifer systems. To simulate the artificial recharge of sand aquifers that were proposed for the Greater Stockholm Area, four separate 4 m deep sand columns were fed raw lake water and examined over a 45-week study period. The simulated aquifer system (hydraulic retention time 9-16 h) demonstrated the removal of total organic carbon (TOC) (10+/-5%), direct total counts (DTC) of bacteria (74+/-11%), heterotrophic plate count (HPC) bacteria (87+/-5%) and assimilable organic carbon (AOC) (87+/-5%), thereby fulfilling an important barrier function, except for the removal of TOC. Hydrophilic humic acid fractions were more readily metabolised by microbiota (HPC and EUB338-positive cells) harvested from the raw source water (SSM-W), whilst hydrophobic humic acid fractions promoted higher activity by microbiota harvested from the sand matrix (SSM-S). The apparent low activity demonstrated by biofilm microbiota (approximately 40% and 25% of DTC were positive to EUB338 probing for sand matrix and slide biofilms, respectively) could be attributed to the highly recalcitrant nature of the organic loads, whilst at the same time explain the poor removal of TOC. Following nutrient activation (by the PAC assay) nonetheless, a 3-fold increase in the percentage of EUB-positive bacteria was observed on glass slides. Furthermore, the incubation of SSM-S with R2A increased probe-active cells from 57+/-8% to 75+/-7% of DTC and at the same time increased SSM-W from 38+/-8% to 50+/-10%. Whilst these results may imply a good potential for the biological treatment of water by shallow sand aquifers, further work should address the poor removal of TOC observed in this study.
Laser Focus on Content Strengthens Teacher Teams
ERIC Educational Resources Information Center
Slavit, David; Nelson, Tamara Holmlund; Kennedy, Anne
2010-01-01
The Partnership for Reform in Secondary Science and Mathematics (PRiSSM) is a three-year project that targeted mathematics and science teachers in middle and high schools from six districts in southwest Washington. Consistent with NSDC (2009) recommendations for professional development, PRiSSM involved collaborative teacher teams in reflecting on…
Energy Coupling During the August 2011 Magnetic Storm (Postprint)
2014-08-27
of the horizontal cross-track plasma drifts in this study. SSM sensors are triaxial fluxgate magnetometers that are mounted on 0.5m booms on the F15...Special Sensor for Ions Electrons and Scintillations (SSIES)). All of the satellites carry magnetometers (Special Sensor for Magnetic Fields (SSM)) to
Student Service Members/Veterans in Higher Education: A Systematic Review
ERIC Educational Resources Information Center
Barry, Adam E.; Whiteman, Shawn D.; MacDermid Wadsworth, Shelley
2014-01-01
We systematically reviewed the data-based peer-reviewed research examining student service members/veterans (SSM/V) in higher education. Compared to civilian peers, SSM/V exhibit disproportionately higher rates of health risk behaviors and psychological symptoms, and personal and educational adjustment difficulties (i.e., inability to connect with…
[Design of a conceptual model on the transference of public health research results in Honduras].
Macías-Chapula, César A
2012-01-01
To design a conceptual model on the transference of public health research results at the local, context level. Using systems thinking concepts, a soft systems approach (SSM) was used to analyse and solve what was perceived as a problem situation related to the transference of research results within Honduras public health system. A bibliometric analysis was also conducted to enrich the problem situation. Six root definitions were defined and modeled as relevant to the expressed problem situation. This led to the development of the conceptual model. The model obtained identified four levels of resolution as derived from the human activities involved in the transference of research results: 1) those of the researchers; 2) the information/documentation professionals; 3) health staff; and 4) the population/society. These actors/ clients and their activities were essential to the functioning of the model since they represent what the model is and does. SSM helped to design the conceptual model. The bibliometric analysis was relevant to construct the rich image of the problem situation.
NASA Astrophysics Data System (ADS)
Kim, Hyunglok; Parinussa, Robert; Konings, Alexandra G.; Wagner, Wolfgang; Cosh, Michael H.; Lakshmi, Venkat; Zohaib, Muhammad; Choi, Minha
2018-01-01
Global-scale surface soil moisture (SSM) products retrieved from active and passive microwave remote sensing provide an effective method for monitoring near-real-time SSM content with nearly daily temporal resolution. In the present study, we first inter-compared global-scale error patterns and combined the Soil Moisture Active Passive (SMAP), Advanced Scatterometer (ASCAT), and Advanced Microwave Scanning Radiometer 2 (AMSR2) SSM products using a triple collocation (TC) analysis and the maximized Pearson correlation coefficient (R) method from April 2015 to December 2016. The Global Land Data Assimilation System (GLDAS) and global in situ observations were utilized to investigate and to compare the quality of satellite-based SSM products. The average R-values of SMAP, ASCAT, and AMSR2 were 0.74, 0.64, and 0.65 when they compared with in situ networks, respectively. The ubRMSD values were (0.0411, 0.0625, and 0.0708) m3 m- 3; and the bias values were (- 0.0460, 0.0010, and 0.0418) m3 m- 3 for SMAP, ASCAT, and AMSR2, respectively. The highest average R-values from SMAP against the in situ results are very encouraging; only SMAP showed higher R-values than GLDAS in several in situ networks with low ubRMSD (0.0438 m3 m- 3). Overall, SMAP showed a dry bias (- 0.0460 m3 m- 3) and AMSR2 had a wet bias (0.0418 m3 m- 3); while ASCAT showed the least bias (0.0010 m3 m- 3) among all the products. Each product was evaluated using TC metrics with respect to the different ranges of vegetation optical depth (VOD). Under vegetation scarce conditions (VOD < 0.10), such as desert and semi-desert regions, all products have difficulty obtaining SSM information. In regions with moderately vegetated areas (0.10 < VOD < 0.40), SMAP showed the highest Signal-to-Noise Ratio. Over highly vegetated regions (VOD > 0.40) ASCAT showed comparatively better performance than did the other products. Using the maximized R method, SMAP, ASCAT, and AMSR2 products were combined one by one using the GLDAS dataset for reference SSM values. When the satellite products were combined, R-values of the combined products were improved or degraded depending on the VOD ranges produced, when compared with the results from the original products alone. The results of this study provide an overview of SMAP, ASCAT, and AMSR2 reliability and the performance of their combined products on a global scale. This study is the first to show the advantages of the recently available SMAP dataset for effective merging of different satellite products and of their application to various hydro-meteorological problems.
Krissinel, E; Henrick, K
2004-12-01
The present paper describes the SSM algorithm of protein structure comparison in three dimensions, which includes an original procedure of matching graphs built on the protein's secondary-structure elements, followed by an iterative three-dimensional alignment of protein backbone Calpha atoms. The SSM results are compared with those obtained from other protein comparison servers, and the advantages and disadvantages of different scores that are used for structure recognition are discussed. A new score, balancing the r.m.s.d. and alignment length Nalign, is proposed. It is found that different servers agree reasonably well on the new score, while showing considerable differences in r.m.s.d. and Nalign.
NASA Astrophysics Data System (ADS)
Jain, Shobhit; Tiso, Paolo; Haller, George
2018-06-01
We apply two recently formulated mathematical techniques, Slow-Fast Decomposition (SFD) and Spectral Submanifold (SSM) reduction, to a von Kármán beam with geometric nonlinearities and viscoelastic damping. SFD identifies a global slow manifold in the full system which attracts solutions at rates faster than typical rates within the manifold. An SSM, the smoothest nonlinear continuation of a linear modal subspace, is then used to further reduce the beam equations within the slow manifold. This two-stage, mathematically exact procedure results in a drastic reduction of the finite-element beam model to a one-degree-of freedom nonlinear oscillator. We also introduce the technique of spectral quotient analysis, which gives the number of modes relevant for reduction as output rather than input to the reduction process.
40 CFR Table 3 to Subpart Bbbbbb... - Applicability of General Provisions
Code of Federal Regulations, 2010 CFR
2010-07-01
... and Maintenance Maintain monitoring system in a manner consistent with good air pollution control... pollution control equipment; maintenance on air pollution control equipment; actions during SSM Yes. § 63.10... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE...
The Strategy Selection Matrix--A Guide for Individualizing Instruction.
ERIC Educational Resources Information Center
Bell, Steven
The Strategy Selection Matrix (SSM) is offered as a means for matching teaching technique to the individual special needs student. Three steps in the SSM are described: development of an intra-individual learning style profile based on 14 learning components; review of the individualizing teaching strategies (such as tutoring, continuous progress…
Contributions of Alternative (Nonformal) Education in Developing Countries.
ERIC Educational Resources Information Center
Koech, Michael Kipkorir
An analysis of two alternative (nonformal) rural education projects provides data on Rural Craft Training Centers (RCTC's) in Kenya and the Sarvodaya Shramadana Movement (SSM) in Sri Lanka. The RCTC objective is to design pilot rural development strategies for expanding income in selected poor; the SSM objective is to build a "righteous…
USDA-ARS?s Scientific Manuscript database
Global-scale surface soil moisture (SSM) products retrieved from active and passive microwave remote sensing provide an effective method for monitoring near-real-time SSM content with nearly daily temporal resolution. In the present study, we first inter-compared global-scale error patterns and comb...
The Superskills Model: A Supervisory Microskill Competency Training Model
ERIC Educational Resources Information Center
Destler, Dusty
2017-01-01
Streamlined supervision frameworks are needed to enhance and progress the practice and training of supervisors. This author proposes the SuperSkills Model (SSM), grounded in the practice of microskills and supervision common factors, with a focus on the development and foundational learning of supervisors-in-training. The SSM worksheet prompts for…
Analysis of Summer 2002 Melt Extent on the Greenland Ice Sheet using MODIS and SSM/I Data
NASA Technical Reports Server (NTRS)
Hall, Dorothy K.; Williams, Richard S., Jr.; Steffen, Konrad; Chien, Y. L.; Foster, James L.; Robinson, David A.; Riggs, George A.
2004-01-01
Previous work has shown that the summer of 2002 had the greatest area of snow melt extent on the Greenland ice sheet ever recorded using passive-microwave data. In this paper, we compare the 0 degree isotherm derived from the Moderate-Resolution Imaging Spectroradiometer (MODIS) instrument, with Special Sensor Microwave/Imager (SSM/I)-derived melt, at the time of the maximum melt extent in 2002. To validate the MODIS-derived land-surface temperatures (LSTs), we compared the MODIS LSTs with air temperatures from nine stations (using 11 different data points) and found that they agreed to within 2.3 plus or minus 2.09 C, with station temperatures consistently lower than the MODIS LSTs. According to the MODIS LST, the maximum surface melt extended to approximately 2300 m in southern Greenland; while the SSM/I measurements showed that the maximum melt extended to nearly 2700 m in southeastern Greenland. The MODIS and SSM/I data are complementary in providing detailed information about the progression of surface and near-surface melt on the Greenland ice sheet.
Phenomenological Consequences of the Constrained Exceptional Supersymmetric Standard Model
DOE Office of Scientific and Technical Information (OSTI.GOV)
Athron, Peter; King, S. F.; Miller, D. J.
2010-02-10
The Exceptional Supersymmetric Standard Model (E{sub 6}SSM) provides a low energy alternative to the MSSM, with an extra gauged U(1){sub N} symmetry, solving the mu-problem of the MSSM. Inspired by the possible embedding into an E{sub 6} GUT, the matter content fills three generations of E{sub 6} multiplets, thus predicting exciting exotic matter such as diquarks or leptoquarks. We present predictions from a constrained version of the model (cE{sub 6}SSM), with a universal scalar mass m{sub 0}, trilinear mass A and gaugino mass M{sub 1/2}. We reveal a large volume of the cE{sub 6}SSM parameter space where the correct breakdownmore » of the gauge symmetry is achieved and all experimental constraints satisfied. We predict a hierarchical particle spectrum with heavy scalars and light gauginos, while the new exotic matter can be light or heavy depending on parameters. We present representative cE{sub 6}SSM scenarios, demonstrating that there could be light exotic particles, like leptoquarks and a U(1){sub N} Z' boson, with spectacular signals at the LHC.« less
A source-specific model for lossless compression of global Earth data
NASA Astrophysics Data System (ADS)
Kess, Barbara Lynne
A Source Specific Model for Global Earth Data (SSM-GED) is a lossless compression method for large images that captures global redundancy in the data and achieves a significant improvement over CALIC and DCXT-BT/CARP, two leading lossless compression schemes. The Global Land 1-Km Advanced Very High Resolution Radiometer (AVHRR) data, which contains 662 Megabytes (MB) per band, is an example of a large data set that requires decompression of regions of the data. For this reason, SSM-GED compresses the AVHRR data as a collection of subwindows. This approach defines the statistical parameters for the model prior to compression. Unlike universal models that assume no a priori knowledge of the data, SSM-GED captures global redundancy that exists among all of the subwindows of data. The overlap in parameters among subwindows of data enables SSM-GED to improve the compression rate by increasing the number of parameters and maintaining a small model cost for each subwindow of data. This lossless compression method is applicable to other large volumes of image data such as video.
Analysis of Summer 2002 Melt Extent on the Greenland Ice Sheet using MODIS and SSM/I Data
NASA Technical Reports Server (NTRS)
Hall, Dorothy K.; Williams, Richard S.; Steffen, Konrad; Chien, Janet Y. L.
2004-01-01
Previous work has shown that the summer of 2002 had the greatest area of snow melt extent on the Greenland ice sheet ever recorded using passive-microwave data. In this paper, we compare the 0 deg. isotherm derived from the Moderate-Resolution Imaging Spectroradiometer (MODIS) instrument, with Special Sensor Microwave/Imager (SSM/I)-derived melt, at the time of the maximum melt extent in 2002. To validate the MODIS derived land-surface temperatures (LSTs), we compared the MODIS LSTs with air temperatures from nine stations (using 11 different data points) and found that they agreed to within 2.3 +/- 2.09 C, with station temperatures consistently lower than the MODIS LSTs. According to the MODIS LST, the maximum surface melt extended to approx. 2300 m in southern Greenland; while the SSM/I measurements showed that the maximum melt extended to nearly 2700 m in southeastern Greenland. The MODIS and SSM/I data are complementary in providing detailed information about the progression of surface and near- surface melt on the Greenland ice sheet.
Analysis of summer 2002 melt extent on the Greenland ice sheet using MODIS and SSM/I data
Hall, D.K.; Williams, R.S.; Steffen, K.; Chien, Janet Y.L.
2004-01-01
Previous work has shown that the summer of 2002 had the greatest area of snow melt extent on the Greenland ice sheet ever recorded using passive-microwave data. In this paper, we compare the 0?? isotherm derived from the Moderate-Resolution Imaging Spectroradiometer (MODIS) instrument, with Special Sensor Microwave/Imager (SSM/I)-derived melt, at the time of the maximum melt extent in 2002. To validate the MODIS-derived land-surface temperatures (LSTs), we compared the MODIS LSTs with air temperatures from nine stations (using 11 different data points) and found that they agreed to within 2.3??2.09??C, with station temperatures consistently lower than the MODIS LSTs. According to the MODIS LST, the maximum surface melt extended to ???2300 m in southern Greenland; while the SSM/I measurements showed that the maximum melt extended to nearly 2700 m in southeastern Greenland. The MODIS and SSM/I data are complementary in providing detailed information about the progression of surface and near-surface melt on the Greenland ice sheet.
Analysis of summer 2002 melt extent on the Greenland ice sheet using MODIS and SSM/I data
Hall, D. K.; Williams, R.S.; Steffen, K.; Chien, Janet Y.L.
2004-01-01
Previous work has shown that the summer of 2002 had the greatest area of snow melt extent on the Greenland ice sheet ever recorded using passive-microwave data. In this paper, we compare the 0deg isotherm derived from the Moderate-Resolution Imaging Spectroradiometer (MODIS) instrument, with Special Sensor Microwave/Imager (SSM/I)-derived melt, at the time of the maximum melt extent in 2002. To validate the MODIS-derived land-surface temperatures (LSTs), we compared the MODIS LSTs with air temperatures from nine stations (using 11 different data points) and found that they agreed to within 2.3 plusmn 2.09 degC, with station temperatures consistently lower than the MODIS LSTs. According to the MODIS LST, the maximum surface melt extended to ~2300 m in southern Greenland; while the SSM/I measurements showed that the maximum melt extended to nearly 2700 m in southeastern Greenland. The MODIS and SSM/I data are complementary in providing detailed information about the progression of surface and near-surface melt on the Greenland ice sheet.
The NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study
NASA Astrophysics Data System (ADS)
Greenhouse, M. A.; NGST ISIM Team
1999-05-01
The Next Generation Space Telescope (NGST) Integrated Science Instrument Module (ISIM) is a distributed system consisting of a cryogenic instrument module that is integrated with the Optical Telescope Assembly (OTA) and science processors, software, and other electronics located in the Space Support Module (SSM). The ISIM system provides structure, environment, and data handling for several modular science instruments as well as several components of the OTA optics train. An ISIM baseline design and feasibility study is ongoing at GSFC. This pre-Phase A design was developed for integration with the Yardstick NGST architecture and packaging in a 5 m class EELV fairing. The goals of this study are to: [1] demonstrate mission science feasibility, [2] assess ISIM engineering and cost feasibility, [3] identify ISIM technology challenge areas,and [4] enable smart customer procurement of the NGST. In depth results from this work beyond those displayed here can be found at: http://www701.gsfc.nasa.gov/isim/isim.htm The flight ISIM will be developed by a GSFC led IPT that includes members from the STScI and, during Phase A/B, will grow to include the NGST Prime Contractor, and science instrument development teams from European, Canadian , and US science communities. Science instruments will be competitively procured from the science community, and will be integrated into the ISIM by GSFC. The flight qualified ISIM will then be delivered by GSFC to the NGST Prime Contractor for observatory level integration. At the start of NGST Phase A (Spring 1999), two competing prime contractors will begin development of separate NGST architectures, and the ISIM IPT will develop two ISIM designs corresponding to these architectures. Down selection to a single design will occur during mid 2001. The ISIM team welcomes science community feedback. Contact the IPT lead: Matt Greenhouse: matt@stars.gsfc.nasa.gov.
Han, Kyuyong; Song, Haengseok; Moon, Irene; Augustin, Robert; Moley, Kelle; Rogers, Melissa; Lim, Hyunjung
2007-03-01
Various nuclear receptors form dimers to activate target genes via specific response elements located within promoters or enhancers. Retinoid X receptor (RXR) serves as a dimerization partner for many nuclear receptors including retinoic acid receptor (RAR) and peroxisome proliferator-activated receptor (PPAR). Dimers show differential preference towards directly repeated response elements with 1-5 nucleotide spacing, and direct repeat 1 (DR1) is a promiscuous element which recruits RAR/RXR, RXR/RXR, and PPAR/RXR in vitro. In the present investigation, we report identification of a novel RAR/RXR target gene which is regulated by DR1s in the promoter region. This gene, namely spermatocyte-specific marker (Ssm), recruits all the three combinations of nuclear receptors in vitro, but in vivo regulation is observed by trans-retinoic acid-activated RAR/RXR dimer. Indeed, chromatin immunoprecipitation experiment demonstrates binding of RARbeta and RXRalpha in the promoter region of the Ssm. Interestingly, expression of Ssm is almost exclusively observed in spermatocytes in the adult mouse testis, where RA signaling is known to regulate developmental program of male germ cells. The results show that Ssm is a RAR/RXR target gene uniquely using DR1 and exhibits stage-specific expression in the mouse testis with potential function in later stages of spermatogenesis. This finding exemplifies usage of DR1s as retinoic acid response element (RARE) under a specific in vivo context.
Binder materials for the cathodes applied to self-stratifying membraneless microbial fuel cell.
Walter, Xavier Alexis; Greenman, John; Ieropoulos, Ioannis
2018-04-19
The recently developed self-stratifying membraneless microbial fuel cell (SSM-MFC) has been shown as a promising concept for urine treatment. The first prototypes employed cathodes made of activated carbon (AC) and polytetrafluoroethylene (PTFE) mixture. Here, we explored the possibility to substitute PTFE with either polyvinyl-alcohol (PVA) or PlastiDip (CPD; i.e. synthetic rubber) as binder for AC-based cathode in SSM-MFC. Sintered activated carbon (SAC) was also tested due to its ease of manufacturing and the fact that no stainless steel collector is needed. Results indicate that the SSM-MFC having PTFE cathodes were the most powerful measuring 1617 μW (11 W·m -3 or 101 mW·m -2 ). SSM-MFC with PVA and CPD as binders were producing on average the same level of power (1226 ± 90 μW), which was 24% less than the SSM-MFC having PTFE-based cathodes. When balancing the power by the cost and environmental impact, results clearly show that PVA was the best alternative. Power wise, the SAC cathodes were shown being the less performing (≈1070 μW). Nonetheless, the lower power of SAC was balanced by its inexpensiveness. Overall results indicate that (i) PTFE is yet the best binder to employ, and (ii) SAC and PVA-based cathodes are promising alternatives that would benefit from further improvements. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.
Preservation of the nipple-areola complex in skin-sparing mastectomy for early breast cancer.
Miyake, Ryo; Kinoshita, Satoki; Shimada, Naoko; Uchida, Ken; Takeyama, Hiroshi; Morikawa, Toshiaki
2018-06-01
Skin-sparing mastectomy (SSM) enables a radical cure of breast cancer while overcoming the cosmetic issues related to surgery. We review our experience of performing SSMs and assess whether preservation of the nipple-areola complex (NAC) could have been an option for some patients who underwent SSM. The subjects of this retrospective study were women who underwent SSM that utilized four incision types; namely, the so-called tennis racket incision, a periareolar and midaxillary incision, an areola-sparing and midaxillary incision, and a small transverse elliptical incision. We assessed whether preservation of the NAC would have been an option in SSM, based on histologic examination of three serial cut surfaces of the specimen around the nipple, ruling out the option when evidence of the malignant lesion/s was found in at least one of the following locations: in the nipple, within a 1-cm radius from the base of the nipple, or within 1 cm from the surface of the NAC. We performed 193 SSMs. The cumulative 10-year local disease-free survival rate was 98%, with 89% of patients reporting levels of satisfaction with the reconstructed breast, of excellent, very good, or good. We evaluated that 70 of the 193 procedures could have been performed as nipple-sparing mastectomy (NSM). The outcomes of SSM in this series were excellent and NSM might have been an option for about one-third of the patients.
Fraction of the global water cycle observed by SMAP
NASA Astrophysics Data System (ADS)
Mccoll, K. A.; Entekhabi, D.; Alemohammad, S. H.; Akbar, R.; Konings, A. G.; Yueh, S. H.
2016-12-01
Sparse and uneven observations have made it difficult to quantify the global distribution and dynamics of surface soil moisture (SSM). Using a full year of global observations from NASA's Soil Moisture Active Passive (SMAP) mission, we show here that SSM - a storage believed to make up less than 0.001% of the global freshwater budget by volume, and equivalent to an, on average, 8-mm thin layer of water covering all land surfaces - plays a very significant role in the water cycle, retaining a median 16% of precipitation falling on land after 3 days. Furthermore, the retained fraction of the SSM storage after 3 days is highest (lowest) over arid (wet) regions, and in regions where drainage to groundwater storage is lowest (highest). The retained fraction decreases monotonically with increasing mean SSM. Regions of low retained fraction broadly correspond spatially with regions where groundwater recharge and groundwater storage are both largest. These analyses are the first global estimates - derived from measurements rather than models - of both the mean magnitude and memory time scales of the SSM storage. Beyond the fundamental importance of characterizing the magnitude and response time scales of Earth's water storages, a key application of these results is in identifying regions with strong land-atmosphere coupling. Significant soil moisture memory is a necessary condition for land-atmosphere feedbacks. These results may therefore have particularly important implications for short-term weather forecasting of extreme precipitation events and floods.
Ulrich, Nils H; Burgstaller, Jakob M; Pichierri, Giuseppe; Wertli, Maria M; Farshad, Mazda; Porchet, François; Steurer, Johann; Held, Ulrike
2017-09-15
Retrospective analysis of a prospective, multicenter cohort study. To estimate the added effect of surgical fusion as compared to decompression surgery alone in symptomatic lumbar spinal stenosis patients with spondylolisthesis. The optimal surgical management of lumbar spinal stenosis patients with spondylolisthesis remains controversial. Patients of the Lumbar Stenosis Outcome Study with confirmed DLSS and spondylolisthesis were enrolled in this study. The outcomes of this study were Spinal Stenosis Measure (SSM) symptoms (score range 1-5, best-worst) and function (1-4) over time, measured at baseline, 6, 12, 24, and 36 months follow-up. In order to quantify the effect of fusion surgery as compared to decompression alone and number of decompressed levels, we used mixed effects models and accounted for the repeated observations in main outcomes (SSM symptoms and SSM function) over time. In addition to individual patients' random effects, we also fitted random slopes for follow-up time points and compared these two approaches with Akaike's Information Criterion and the chi-square test. Confounders were adjusted with fixed effects for age, sex, body mass index, diabetes, Cumulative Illness Rating Scale musculoskeletal disorders, and duration of symptoms. One hundred thirty-one patients undergoing decompression surgery alone (n = 85) or decompression with fusion surgery (n = 46) were included in this study. In the multiple mixed effects model the adjusted effect of fusion compared with decompression alone surgery on SSM symptoms was 0.06 (95% confidence interval: -0.16-0.27) and -0.07 (95% confidence interval: -0.25-0.10) on SSM function, respectively. Among the patients with degenerative lumbar spinal stenosis and spondylolisthesis our study confirms that in the two groups, decompression alone and decompression with fusion, patients distinctively benefited from surgical treatment. When adjusted for confounders, fusion surgery was not associated with a more favorable outcome in both SSM scores as compared to decompression alone surgery. 3.
NASA Technical Reports Server (NTRS)
Petty, Grant W.
1990-01-01
A reasonably rigorous basis for understanding and extracting the physical information content of Special Sensor Microwave/Imager (SSM/I) satellite images of the marine environment is provided. To this end, a comprehensive algebraic parameterization is developed for the response of the SSM/I to a set of nine atmospheric and ocean surface parameters. The brightness temperature model includes a closed-form approximation to microwave radiative transfer in a non-scattering atmosphere and fitted models for surface emission and scattering based on geometric optics calculations for the roughened sea surface. The combined model is empirically tuned using suitable sets of SSM/I data and coincident surface observations. The brightness temperature model is then used to examine the sensitivity of the SSM/I to realistic variations in the scene being observed and to evaluate the theoretical maximum precision of global SSM/I retrievals of integrated water vapor, integrated cloud liquid water, and surface wind speed. A general minimum-variance method for optimally retrieving geophysical parameters from multichannel brightness temperature measurements is outlined, and several global statistical constraints of the type required by this method are computed. Finally, a unified set of efficient statistical and semi-physical algorithms is presented for obtaining fields of surface wind speed, integrated water vapor, cloud liquid water, and precipitation from SSM/I brightness temperature data. Features include: a semi-physical method for retrieving integrated cloud liquid water at 15 km resolution and with rms errors as small as approximately 0.02 kg/sq m; a 3-channel statistical algorithm for integrated water vapor which was constructed so as to have improved linear response to water vapor and reduced sensitivity to precipitation; and two complementary indices of precipitation activity (based on 37 GHz attenuation and 85 GHz scattering, respectively), each of which are relatively insensitive to variations in other environmental parameters.
Generation of Level 3 SMMR and SSM/I Brightness Temperatures for the Period 1978-1999
NASA Technical Reports Server (NTRS)
Partington, Kim
1999-01-01
The NOAA/NASA Pathfinder Program was initially designed to assure that certain key remote sensing data sets of particular significance to global change research were scientifically validated, consistently processed and made readily available to the research community at minimal cost. Through this Program the National Snow and Ice Data Center (NSIDC), University of Colorado has successfully processed, archived and distributed the Scanning Multichannel Microwave Radiometer (SMMR) and Special Sensor Microwave/Imager (SSM/I) Level 3 (EASE-Grid format) Pathfinder data sets for the period 1978 to 1999. These data are routinely distributed to approximately 150 researchers through various media including CD-ROM, 8 mm tape, ftp and the EOS Information Management System (IMS). At NSIDC these data are currently being applied in the development and validation of algorithms to derive snow water equivalent (NASA NAG5-6636), the mapping of frozen ground and the detection of the onset of melt over ice sheets, sea ice and snow cover. The EASE-Grid format, developed at NSIDC in conjunction with the SMMR-SSM/I Pathfinder project has also been applied to Advanced Very High Resolution Radiometer (AVHRR) and TOVS Pathfinder data, as well as ancillary data such as digital elevation, land cover classification and several in situ data sets. EASE-Grid will also be used for all land products derived from the NASA EOS AMSR-E instrument.
ERIC Educational Resources Information Center
Kapoor, Dip
2011-01-01
Through a selective deployment of conceptualisations from subaltern studies, in particular the concepts of political (un-civil) society and an autonomous domain (or a people's politics that suggests the plausibility of dominance without hegemony), this article distinguishes a subaltern social movement (SSM) formation and related anti-colonial SSM…
Behavioral Health and Adjustment to College Life for Student Service Members/Veterans
ERIC Educational Resources Information Center
Schonfeld, Lawrence; Braue, Lawrence A.; Stire, Sheryl; Gum, Amber M.; Cross, Brittany L.; Brown, Lisa M.
2015-01-01
Objective: Increasing numbers of student service members/veterans (SSM/Vs) are enrolling in college. However, little is known about how their previous military experience affects their adjustment to this new role. The present study tested the hypothesis that SSM/Vs who report adjustment problems in college have a higher incidence of posttraumatic…
ERIC Educational Resources Information Center
Borowa, Dominika; Robitschek, Christine; Harmon, Kevin Andrew; Shigemoto, Yuki
2016-01-01
Objective: This study explored the extent to which personal growth initiative (PGI) may predict posttraumatic stress and growth in student service members/veterans (SSM/V). Participants: Participants were 136 SSM/V (79% men) representing multiple branches of the armed forces. Forty-four percent of participants reported having combat experience.…
DMSP F11 SSM/T-2 Calibration and Validation
1992-10-29
throughput and memory allocations . I We express our respect for those visionaries of the past who conceived of the idea of an SSM/`T-2 and worked to...82 pp. Kriging, D.P., 1973, Analyse Objective du geopotential et du vent geostrophique par Krigeage universel , LaMetoiQ"i , V-25. Lindzen, R. S
NASA Astrophysics Data System (ADS)
Smirnova, J. E.; Zabolotskikh, E. V.; Bobylev, L. P.; Chapron, B.
2016-12-01
In this study polar lows over the Nordic Seas for the period of 1995-2008 have been detected and studied using the Special Sensor Microwave Imager (SSM/I) data. A new methodology for polar low detection and monitoring based on the analysis of the total atmospheric water vapor content (WVC) fields retrieved from SSM/I was used. Lifetimes, diameters, translation speeds, distances traveled, and intensities were estimated for the detected polar lows using SSM/I WVC, sea surface wind speed fields and infrared imagery. Over the Norwegian and Barents Seas, the polar low activity was found to be almost equal. A positive tendency in the total number of polar lows for the time period of 1995-2008 was detected.
Hoenner, Xavier; Whiting, Scott D.; Hindell, Mark A.; McMahon, Clive R.
2012-01-01
Accurately quantifying animals’ spatial utilisation is critical for conservation, but has long remained an elusive goal due to technological impediments. The Argos telemetry system has been extensively used to remotely track marine animals, however location estimates are characterised by substantial spatial error. State-space models (SSM) constitute a robust statistical approach to refine Argos tracking data by accounting for observation errors and stochasticity in animal movement. Despite their wide use in ecology, few studies have thoroughly quantified the error associated with SSM predicted locations and no research has assessed their validity for describing animal movement behaviour. We compared home ranges and migratory pathways of seven hawksbill sea turtles (Eretmochelys imbricata) estimated from (a) highly accurate Fastloc GPS data and (b) locations computed using common Argos data analytical approaches. Argos 68th percentile error was <1 km for LC 1, 2, and 3 while markedly less accurate (>4 km) for LC ≤0. Argos error structure was highly longitudinally skewed and was, for all LC, adequately modelled by a Student’s t distribution. Both habitat use and migration routes were best recreated using SSM locations post-processed by re-adding good Argos positions (LC 1, 2 and 3) and filtering terrestrial points (mean distance to migratory tracks ± SD = 2.2±2.4 km; mean home range overlap and error ratio = 92.2% and 285.6 respectively). This parsimonious and objective statistical procedure however still markedly overestimated true home range sizes, especially for animals exhibiting restricted movements. Post-processing SSM locations nonetheless constitutes the best analytical technique for remotely sensed Argos tracking data and we therefore recommend using this approach to rework historical Argos datasets for better estimation of animal spatial utilisation for research and evidence-based conservation purposes. PMID:22808241
NASA Astrophysics Data System (ADS)
Sanchez, J.; Mann, P.
2013-12-01
The Maracaibo block in the northwestern South America is a triangular lithotectonic terrane bounded on its western edge by the Santa Marta-Bucaramanga left-lateral strike-slip fault and the Oca-Ancon right-lateral strike-slip fault on its northern edge. These faults bound two isolated Andean ranges within the Maracaibo block: the Sierra de Santa Marta massif (SSM) in the east whose highest point is 5700 m ASL, and the Serrania del Perija (SP) to the west, whose highest point is 3600 m ASL. The two ranges are separated by an elongate, NNE-trending sedimentary basin, the Cesar-Rancheria basin (CRB). Previous thermochronological studies in the region have shown three discrete exhumation pulses from Paleocene to Miocene that are attributed to various collisional and strike events along the Caribbean margin. However the tectonic origin of the late Neogene deformation that produced the isolated, high topography of the SSM and SP has remained unclear. To establish patterns of recent uplift and associate them with a specific tectonic mechanism affecting the area, we integrated the following results: 1) analysis of stream profiles using channel normalized steepness indices and identification of slope-break knickpoints as indicators of rock uplift; 2) integration of observations from geological maps; 3) interpretation of 2D onland seismic profiles; 4) analysis of published thermochronological data; and 5) analysis of 1D/2D basin model based on well subsidence analysis from the CRB. Our results from the extraction of 550 long stream profiles from different watersheds for the SSM and SP reveal: 1) undisturbed profiles at western flank of the northern SP characterized by a few vertical-step knickpoints associated with lithology changes; in contrast the eastern flank of the northern SP shows slope-break knickpoints and changes in steepness indices increasing by a factor of ~2, all indicative of active fault control affecting this area; 2) disturbed profiles in the elevated central SP show several slope-break knickpoints and changes in steepness indices by factor of ~1.9, all indicative of fault control in this area; 3) perturbations in stream profiles with change in steepness indices by a factor of ~1.6 occur in the southern SP are interpreted as the expression of the active Santa-Marta Bucaramanga fault system, 4) although most of the knickpoints in SSM profiles seem to be associated with changes in bedrock lithology, the alignments, slope-breaking character, and change in steepness indices by factor of ~1.8-2.2 indicate active ENE-WSW fault control along the south-southeastern edge of the SSM, 5) generally undisturbed profiles at northern SSM suggest current quiescence in rock uplift in this area; and 6) basin modeling of the CRB constrain the most recent uplift event as Mio-Pliocene at rates of 0.15-0.18 mm/yr. We propose that the most likely tectonic mechanism to explain widespread active fault activity and uplift within the SSM and SP is oblique, low-angle (20 degrees), southeastward subduction of the Caribbean plate beneath the area. The present rate of subduction and length of slab would have initiated uplift and fault activity at Early Miocene.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The present conference on satellite meteorology and oceanography discusses climate and clouds, retrieval algorithms, air-sea phenomenology, oceanographic applications, SSM/I, mesoscale, synoptic, and NWP applications, and future satellites and systems. Attention is given to the properties of cirrus clouds measured by satellites and lidars, the geographical variation of the diurnal cycle of clouds from ISCCP, the susceptibility of cloud reflectance to pollution, and a global analysis of aerosol-cloud interactions. Topics addressed include precision intercomparisons between MSU channel 2 and radiosonde data over the U.S., humidity estimates from Meteosat observations, the assimilation of altimeter observations into a global wave model, and atmosphericmore » stratification effects on scatterometer model functions. Also discussed are observations of Indian Ocean eddy variability, the deconvolution of GOES infrared data, short-range variations in total cloud cover in the tropics, and rainfall monitoring by the SSM/I in middle latitudes.« less
Water-mediated interactions between hydrophobic and ionic species in cylindrical nanopores
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vaitheeswaran, S.; Reddy, G.; Thirumalai, D.
2009-03-07
We use Metropolis Monte Carlo and umbrella sampling to calculate the free energies of interaction of two methane molecules and their charged derivatives in cylindrical water-filled pores. Confinement strongly alters the interactions between the nonpolar solutes and completely eliminates the solvent separated minimum (SSM) that is seen in bulk water. The free energy profiles show that the methane molecules are either in contact or at separations corresponding to the diameter and the length of the cylindrical pore. Analytic calculations that estimate the entropy of the solutes, which are solvated at the pore surface, qualitatively explain the shape of the freemore » energy profiles. Adding charges of opposite sign and magnitude 0.4e or e (where e is the electronic charge) to the methane molecules decreases their tendency for surface solvation and restores the SSM. We show that confinement induced ion-pair formation occurs whenever l{sub B}/D{approx}O(1), where l{sub B} is the Bjerrum length and D is the pore diameter. The extent of stabilization of the SSM increases with ion charge density as long as l{sub B}/D<1. In pores with D{<=}1.2 nm, in which the water is strongly layered, increasing the charge magnitude from 0.4e to e reduces the stability of the SSM. As a result, ion-pair formation that occurs with negligible probability in the bulk is promoted. In larger diameter pores that can accommodate a complete hydration layer around the solutes, the stability of the SSM is enhanced.« less
Search for sharp and smooth spectral signatures of μνSSM gravitino dark matter with Fermi-LAT
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gómez-Vargas, Germán A.; López-Fogliani, Daniel E.; Perez, Andres D.
The μνSSM solves the μ problem of supersymmetric models and reproduces neutrino data, simply using couplings with right-handed neutrinos ν's. Given that these couplings break explicitly R parity, the gravitino is a natural candidate for decaying dark matter in the μνSSM. In this work we carry out a complete analysis of the detection of μνSSM gravitino dark matter through γ-ray observations. In addition to the two-body decay producing a sharp line, we include in the analysis the three-body decays producing a smooth spectral signature. We perform first a deep exploration of the low-energy parameter space of the μνSSM taking intomore » account that neutrino data must be reproduced. Then, we compare the γ-ray fluxes predicted by the model with Fermi -LAT observations. In particular, with the 95% CL upper limits on the total diffuse extragalactic γ-ray background using 50 months of data, together with the upper limits on line emission from an updated analysis using 69.9 months of data. For standard values of bino and wino masses, gravitinos with masses larger than about 4 GeV, or lifetimes smaller than about 10{sup 28} s, produce too large fluxes and are excluded as dark matter candidates. However, when limiting scenarios with large and close values of the gaugino masses are considered, the constraints turn out to be less stringent, excluding masses larger than 17 GeV and lifetimes smaller than 4 × 10{sup 25} s.« less
Search for sharp and smooth spectral signatures of μνSSM gravitino dark matter with Fermi-LAT
NASA Astrophysics Data System (ADS)
Gómez-Vargas, Germán A.; López-Fogliani, Daniel E.; Muñoz, Carlos; Perez, Andres D.; Ruiz de Austri, Roberto
2017-03-01
The μνSSM solves the μ problem of supersymmetric models and reproduces neutrino data, simply using couplings with right-handed neutrinos ν's. Given that these couplings break explicitly R parity, the gravitino is a natural candidate for decaying dark matter in the μνSSM. In this work we carry out a complete analysis of the detection of μνSSM gravitino dark matter through γ-ray observations. In addition to the two-body decay producing a sharp line, we include in the analysis the three-body decays producing a smooth spectral signature. We perform first a deep exploration of the low-energy parameter space of the μνSSM taking into account that neutrino data must be reproduced. Then, we compare the γ-ray fluxes predicted by the model with Fermi-LAT observations. In particular, with the 95% CL upper limits on the total diffuse extragalactic γ-ray background using 50 months of data, together with the upper limits on line emission from an updated analysis using 69.9 months of data. For standard values of bino and wino masses, gravitinos with masses larger than about 4 GeV, or lifetimes smaller than about 1028 s, produce too large fluxes and are excluded as dark matter candidates. However, when limiting scenarios with large and close values of the gaugino masses are considered, the constraints turn out to be less stringent, excluding masses larger than 17 GeV and lifetimes smaller than 4 × 1025 s.
NASA Astrophysics Data System (ADS)
Wu, Zhejun; Kudenov, Michael W.
2017-05-01
This paper presents a reconstruction algorithm for the Spatial-Spectral Multiplexing (SSM) optical system. The goal of this algorithm is to recover the three-dimensional spatial and spectral information of a scene, given that a one-dimensional spectrometer array is used to sample the pupil of the spatial-spectral modulator. The challenge of the reconstruction is that the non-parametric representation of the three-dimensional spatial and spectral object requires a large number of variables, thus leading to an underdetermined linear system that is hard to uniquely recover. We propose to reparameterize the spectrum using B-spline functions to reduce the number of unknown variables. Our reconstruction algorithm then solves the improved linear system via a least- square optimization of such B-spline coefficients with additional spatial smoothness regularization. The ground truth object and the optical model for the measurement matrix are simulated with both spatial and spectral assumptions according to a realistic field of view. In order to test the robustness of the algorithm, we add Poisson noise to the measurement and test on both two-dimensional and three-dimensional spatial and spectral scenes. Our analysis shows that the root mean square error of the recovered results can be achieved within 5.15%.
Polymeric variable optical attenuators based on magnetic sensitive stimuli materials
NASA Astrophysics Data System (ADS)
de Pedro, S.; Cadarso, V. J.; Ackermann, T. N.; Muñoz-Berbel, X.; Plaza, J. A.; Brugger, J.; Büttgenbach, S.; Llobera, A.
2014-12-01
Magnetically-actuable, polymer-based variable optical attenuators (VOA) are presented in this paper. The design comprises a cantilever which also plays the role of a waveguide and the input/output alignment elements for simple alignment, yet still rendering an efficient coupling. Magnetic properties have been conferred to these micro-opto-electromechanical systems (MOEMS) by implementing two different strategies: in the first case, a magnetic sensitive stimuli material (M-SSM) is obtained by a combination of polydimethylsiloxane (PDMS) and ferrofluid (FF) in ratios between 14.9 wt % and 29.9 wt %. An M-SSM strip under the waveguide-cantilever, defined with soft lithography (SLT), provides the required actuation capability. In the second case, specific volumes of FF are dispensed at the end of the cantilever tip (outside the waveguide) by means of inkjet printing (IJP), obtaining the required magnetic response while holding the optical transparency of the waveguide-cantilever. In the absence of a magnetic field, the waveguide-cantilever is aligned with the output fiber optics and thus the intrinsic optical losses can be obtained. Numerical simulations, validated experimentally, have shown that, for any cantilever length, the VOAs defined by IJP present lower intrinsic optical losses than their SLT counterparts. Under an applied magnetic field (Bapp), both VOA configurations experience a misalignment between the waveguide-cantilever and the output fiber optics. Thus, the proposed VOAs modulate the output power as a function of the cantilever displacement, which is proportional to Bapp. The experimental results for the three different waveguide-cantilever lengths and six different FF concentrations (three per technology) show maximum deflections of 220 µm at 29.9 wt % of FF for VOASLT and 250 µm at 22.3 wt % FF for VOAIJP, at 0.57 kG for both. These deflections provide maximum actuation losses of 16.1 dB and 18.9 dB for the VOASLT and VOAIJP, respectively.
NASA Technical Reports Server (NTRS)
Hou, Arthur Y.; Zhang, Sara Q.; deSilva, Arlindo M.
2000-01-01
Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of tropical rainfall and total precipitable water (TPW) observations from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve short-range forecast and reanalyses. We describe a "1+1"D procedure for assimilating 6-hr averaged rainfall and TPW in the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS, hence the "1+1"D designation. The scheme minimizes the least-square differences between the observed TPW and rain rates and those produced by the column model over the 6-hr analysis window. This 1+lD scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but uses analysis increments instead of the initial condition as the control variable. Results show that assimilating the TMI and SSM/I rainfall and TPW observations improves not only the precipitation and moisture fields but also key climate parameters such as clouds, the radiation, the upper-tropospheric moisture, and the large-scale circulation in the tropics. In particular, assimilating these data reduce the state-dependent systematic errors in the assimilated products. The improved analysis also provides better initial conditions for short-range forecasts, but the improvements in forecast are less than improvements in the time-averaged assimilation fields, indicating that using these data types is effective in correcting biases and other errors of the forecast model in data assimilation.
40 CFR 63.2850 - How do I comply with the hazardous air pollutant emission standards?
Code of Federal Regulations, 2010 CFR
2010-07-01
...) Periodic SSM reports in accordance with § 63.2861(c). (iii) Immediate SSM reports in accordance with § 63... and table 1 of this section for sources under normal operation, and the schedules for demonstrating compliance for existing sources under normal operation in table 2 of this section. (c) New sources. Your new...
40 CFR 63.2850 - How do I comply with the hazardous air pollutant emission standards?
Code of Federal Regulations, 2013 CFR
2013-07-01
... accordance with § 63.2861(a). (ii) Periodic SSM reports in accordance with § 63.2861(c). (iii) Immediate SSM... paragraph (a) of this section and table 1 of this section for sources under normal operation, and the schedules for demonstrating compliance for existing sources under normal operation in table 2 of this...
40 CFR 63.2850 - How do I comply with the hazardous air pollutant emission standards?
Code of Federal Regulations, 2014 CFR
2014-07-01
... accordance with § 63.2861(a). (ii) Periodic SSM reports in accordance with § 63.2861(c). (iii) Immediate SSM... paragraph (a) of this section and table 1 of this section for sources under normal operation, and the schedules for demonstrating compliance for existing sources under normal operation in table 2 of this...
40 CFR 63.2850 - How do I comply with the hazardous air pollutant emission standards?
Code of Federal Regulations, 2012 CFR
2012-07-01
... accordance with § 63.2861(a). (ii) Periodic SSM reports in accordance with § 63.2861(c). (iii) Immediate SSM... paragraph (a) of this section and table 1 of this section for sources under normal operation, and the schedules for demonstrating compliance for existing sources under normal operation in table 2 of this...
40 CFR 63.2850 - How do I comply with the hazardous air pollutant emission standards?
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Periodic SSM reports in accordance with § 63.2861(c). (iii) Immediate SSM reports in accordance with § 63... and table 1 of this section for sources under normal operation, and the schedules for demonstrating compliance for existing sources under normal operation in table 2 of this section. (c) New sources. Your new...
49 CFR 222.55 - How are new supplementary or alternative safety measures approved?
Code of Federal Regulations, 2010 CFR
2010-10-01
... applicant; (2) A description and design of the proposed new SSM or ASM; (3) A description and results of the... SSM or ASM; and (5) Any other information deemed necessary. (e) If the Associate Administrator is... an ASM to be used in the same manner as the measures listed in appendix B of this part. The Associate...
ERIC Educational Resources Information Center
Ness, Bryan M.; Middleton, Michael J.; Hildebrandt, Michael J.
2015-01-01
Objectives: To examine the relationships between self-reported posttraumatic stress disorder (PTSD) symptoms, perceived positive relations with others, self-regulation strategy use, and academic motivation among student service members/veterans (SSM/V) enrolled in postsecondary education. Participants: SSM/V (N = 214), defined as veterans, active…
ERIC Educational Resources Information Center
Song, Hairong; Ferrer, Emilio
2009-01-01
This article presents a state-space modeling (SSM) technique for fitting process factor analysis models directly to raw data. The Kalman smoother via the expectation-maximization algorithm to obtain maximum likelihood parameter estimates is used. To examine the finite sample properties of the estimates in SSM when common factors are involved, a…
A 7.5-Year Dataset of SSM/I-Derived Surface Turbulent Fluxes Over Global Oceans
NASA Technical Reports Server (NTRS)
Chou, Shu-Hsien; Shie, Chung-Lin; Atlas, Robert M.; Adizzone, Joe; Nelkin, Eric; Starr, David OC. (Technical Monitor)
2001-01-01
The global air-sea turbulent fluxes are needed for driving ocean models and validating coupled ocean-atmosphere global models. A method was developed to retrieve surface air humidity from the radiances measured by the Special Sensor Microwave/Imager (SSM/I) Using both SSM/I-retrieved surface wind and air humidity, they computed daily turbulent fluxes over global oceans with a stability-dependent bulk scheme. Based on this method, we have produced Version 1 of Goddard Satellite-Based Surface Turbulent Fluxes (GSSTF) dataset from the SSM/I data and other data. It provides daily- and monthly-mean surface turbulent fluxes and some relevant parameters over global oceans for individual F8, F10, and F11 satellites covering the period July 1987-December 1994. It also provides 1988-94 annual- and monthly-mean climatologies of the same variables, using only F8 and F1 1 satellite data. It has a spatial resolution of 2.0 degrees x 2.5 degrees lat-long and is archived at the NASA/GSFC DAAC. The purpose of this paper is to present an updated assessment of the GSSTF 1.0 dataset.
Transmission blocking malaria vaccines: Assays and candidates in clinical development.
Sauerwein, R W; Bousema, T
2015-12-22
Stimulated by recent advances in malaria control and increased funding, the elimination of malaria is now considered to be an attainable goal for an increasing number of malaria-endemic regions. This has boosted the interest in transmission-reducing interventions including vaccines that target sexual, sporogenic, and/or mosquito-stage antigens to interrupt malaria transmission (SSM-VIMT). SSM-VIMT aim to prevent human malaria infection in vaccinated communities by inhibiting parasite development within the mosquito after a blood meal taken from a gametocyte carrier. Only a handful of target antigens are in clinical development and progress has been slow over the years. Major stumbling blocks include (i) the expression of appropriately folded target proteins and their downstream purification, (ii) insufficient induction of sustained functional blocking antibody titers by candidate vaccines in humans, and (iii) validation of a number of (bio)-assays as correlate for blocking activity in the field. Here we discuss clinical manufacturing and testing of current SSM-VIMT candidates and the latest bio-assay development for clinical evaluation. New testing strategies are discussed that may accelerate the evaluation and application of SSM-VIMT. Copyright © 2015. Published by Elsevier Ltd.
NASA Technical Reports Server (NTRS)
Esper, Jaime
2004-01-01
In order to execute the Vision for Space Exploration, we must find ways to reduce cost, system complexity, design, build, and test times, and at the same time increase flexibility to satisfy multiple functions. Modular, Adaptive, Reconfigurable System (MARS) technologies promise to set the stage for the delivery of system elements that form the building blocks of increasingly ambitious missions involving humans and robots. Today, space systems are largely specialized and built on a case-by-case basis. The notion of modularity however, is nothing new to NASA. The 1970's saw the development of the Multi-Mission Modular spacecraft (MMS). From 1980 to 1992 at least six satellites were built under this paradigm, and included such Goddard Space Flight Center missions as SSM, EUVE, UARS, and Landsat 4 and 5. Earlier versions consisted of standard subsystem "module" or "box" components that could be replaced within a structure based on predefined form factors. Although the primary motivation for MMS was faster/cheaper integration and test, standardization of interfaces, and ease of incorporating new subsystem technology, it lacked the technology maturity and programmatic "upgrade infrastructure" needed to satisfy varied mission requirements, and ultimately it lacked user buy-in. Consequently, it never evolved and was phased out. Such concepts as the Rapid Spacecraft Development Office (RSDO) with its regularly updated catalogue of prequalified busses became the preferred method for acquiring satellites. Notwithstanding, over the past 30 years since MMS inception, technology has advanced considerably and now modularity can be extended beyond the traditional MMS module or box to cover levels of integration, from the chip, card, box, subsystem, to the space system and to the system-of-systems. This paper will present the MARS architecture, cast within the historical context of MMS. Its application will be highlighted by comparing a state-of-the-art point design vs. a MARS-enabled lunar mission, as a representative robotic case design.
NASA Astrophysics Data System (ADS)
Esper, Jaime
2005-02-01
In order to execute the Vision for Space Exploration, we must find ways to reduce cost, system complexity, design, build, and test times, and at the same time increase flexibility to satisfy multiple functions. Modular, Adaptive, Reconfigurable System (MARS) technologies promise to set the stage for the delivery of system elements that form the building blocks of increasingly ambitious missions involving humans and robots. Today, space systems are largely specialized and built on a case-by-case basis. The notion of modularity however, is nothing new to NASA. The 1970's saw the development of the Multi-Mission Modular spacecraft (MMS). From 1980 to 1992 at least six satellites were built under this paradigm, and included such Goddard Space Flight Center missions as SSM, EUVE, UARS, and Landsat 4 and 5. Earlier versions consisted of standard subsystem ``module'' or ``box'' components that could be replaced within a structure based on predefined form factors. Although the primary motivation for MMS was faster/cheaper integration and test, standardization of interfaces, and ease of incorporating new subsystem technology, it lacked the technology maturity and programmatic ``upgrade infrastructure'' needed to satisfy varied mission requirements, and ultimately it lacked user buy-in. Consequently, it never evolved and was phased out. Such concepts as the Rapid Spacecraft Development Office (RSDO) with its regularly updated catalogue of pre-qualified busses became the preferred method for acquiring satellites. Notwithstanding, over the past 30 years since MMS inception, technology has advanced considerably and now modularity can be extended beyond the traditional MMS module or box to cover levels of integration, from the chip, card, box, subsystem, to the space system and to the system-of-systems. This paper will present the MARS architecture, cast within the historical context of MMS. Its application will be highlighted by comparing a state-of-the-art point design vs. a MARS-enabled lunar mission, as a representative robotic case design.
Rodrigues, Roberta R; Cheema, Hammad; Delcamp, Jared H
2018-05-04
The development of high voltage solar cells is an attractive way to use sunlight for solar-to-fuel devices, multijunction solar-to-electric systems, and to power limited-area consumer electronics. By designing a low-oxidation-potential organic dye (RR9)/redox shuttle (Fe(bpy) 3 3+/2+ ) pair for dye-sensitized solar-cell (DSSC) devices, the highest single device photovoltage (1.42 V) has been realized for a DSSC not relying on doped TiO 2 . Additionally, Fe(bpy) 3 3+/2+ offers a robust, readily tunable ligand platform for redox potential tuning. RR9 can be regenerated with a low driving force (190 mV), and by utilizing the RR9/Fe(bpy) 3 3+/2+ redox shuttle pair in a subcell for a sequential series multijunction (SSM)-DSSC system, one of the highest known three subcell photovoltage was attained for any solar-cell technology (3.34 V, >1.0 V per subcell). © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
Introduction to Solid Supported Membrane Based Electrophysiology
Bazzone, Andre; Costa, Wagner Steuer; Braner, Markus; Călinescu, Octavian; Hatahet, Lina; Fendler, Klaus
2013-01-01
The electrophysiological method we present is based on a solid supported membrane (SSM) composed of an octadecanethiol layer chemisorbed on a gold coated sensor chip and a phosphatidylcholine monolayer on top. This assembly is mounted into a cuvette system containing the reference electrode, a chlorinated silver wire. After adsorption of membrane fragments or proteoliposomes containing the membrane protein of interest, a fast solution exchange is used to induce the transport activity of the membrane protein. In the single solution exchange protocol two solutions, one non-activating and one activating solution, are needed. The flow is controlled by pressurized air and a valve and tubing system within a faraday cage. The kinetics of the electrogenic transport activity is obtained via capacitive coupling between the SSM and the proteoliposomes or membrane fragments. The method, therefore, yields only transient currents. The peak current represents the stationary transport activity. The time dependent transporter currents can be reconstructed by circuit analysis. This method is especially suited for prokaryotic transporters or eukaryotic transporters from intracellular membranes, which cannot be investigated by patch clamp or voltage clamp methods. PMID:23711952
Introduction to solid supported membrane based electrophysiology.
Bazzone, Andre; Costa, Wagner Steuer; Braner, Markus; Călinescu, Octavian; Hatahet, Lina; Fendler, Klaus
2013-05-11
The electrophysiological method we present is based on a solid supported membrane (SSM) composed of an octadecanethiol layer chemisorbed on a gold coated sensor chip and a phosphatidylcholine monolayer on top. This assembly is mounted into a cuvette system containing the reference electrode, a chlorinated silver wire. After adsorption of membrane fragments or proteoliposomes containing the membrane protein of interest, a fast solution exchange is used to induce the transport activity of the membrane protein. In the single solution exchange protocol two solutions, one non-activating and one activating solution, are needed. The flow is controlled by pressurized air and a valve and tubing system within a faraday cage. The kinetics of the electrogenic transport activity is obtained via capacitive coupling between the SSM and the proteoliposomes or membrane fragments. The method, therefore, yields only transient currents. The peak current represents the stationary transport activity. The time dependent transporter currents can be reconstructed by circuit analysis. This method is especially suited for prokaryotic transporters or eukaryotic transporters from intracellular membranes, which cannot be investigated by patch clamp or voltage clamp methods.
The Synchrotron Shock Model Confronts a "Line of Death" in the BATSE Gamma-Ray Burst Data
NASA Technical Reports Server (NTRS)
Preece, Robert D.; Briggs, Michael S.; Mallozzi, Robert S.; Pendleton, Geoffrey N.; Paciesas, W. S.; Band, David L.
1998-01-01
The synchrotron shock model (SSM) for gamma-ray burst emission makes a testable prediction: that the observed low-energy power-law photon number spectral index cannot exceed -2/3 (where the photon model is defined with a positive index: $dN/dE \\propto E{alpha}$). We have collected time-resolved spectral fit parameters for over 100 bright bursts observed by the Burst And Transient Source Experiment on board the {\\it Compton Gamma Ray Observatory}. Using this database, we find 23 bursts in which the spectral index limit of the SSM is violated, We discuss elements of the analysis methodology that affect the robustness of this result, as well as some of the escape hatches left for the SSM by theory.
NASA Technical Reports Server (NTRS)
Prigent, Catherine; Pardo, Juan R.; Mishchenko, Michael I.; Rossow, Willaim B.; Hansen, James E. (Technical Monitor)
2001-01-01
Special Sensor Microwave /Imager (SSM/I) observations in cloud systems are studied over the tropics. Over optically thick cloud systems, presence of polarized signatures at 37 and 85 GHz is evidenced and analyzed with the help of cloud top temperature and optical thickness extracted from visible and IR satellite observations. Scattering signatures at 85 GHz (TbV(85) less than or = 250 K) are associated with polarization differences greater than or = 6 K, approx. 50%, of the time over ocean and approx. 40% over land. In addition. over thick clouds the polarization difference at 37 GHz is rarely negligible. The polarization differences at 37 and 85 GHz do not stem from the surface but are generated in regions of relatively homogeneous clouds having high liquid water content. To interpret the observations, a radiative transfer model that includes the scattering by non-spherical particles is developed. based on the T-matrix approach and using the doubling and adding method. In addition to handling randomly and perfectly oriented particles, this model can also simulate the effect of partial orientation of the hydrometeors. Microwave brightness temperatures are simulated at SSM/I frequencies and are compared with the observations. Polarization differences of approx. 2 K can be simulated at 37 GHz over a rain layer, even using spherical drops. The polarization difference is larger for oriented non-spherical particles. The 85 GHz simulations are very sensitive to the ice phase of the cloud. Simulations with spherical particles or with randomly oriented non-spherical ice particles cannot replicate the observed polarization differences. However, with partially oriented non-spherical particles, the observed polarized signatures at 85 GHz are explained, and the sensitivity of the scattering characteristics to the particle size, asphericity, and orientation is analyzed. Implications on rain and ice retrievals are discussed.
2011-12-01
Checkland and John Poulter and the theory of soft systems methodology (SSM). Soft systems methodology theory is a prescriptive conflict resolution...those in the dominant culture. The Army, however, is a government organization. Morton Halperin and John Q.Wilson provide some classic insight into...21Peter Checkland and John Poulter, Learning for Action (West Sussex, England: John Wiley & Sons Ltd
Khaparde, Sunil; Nair, Sreenivas Achuthan; Denkinger, Claudia; Sachdeva, Kuldeep Singh; Paramasivan, Chinnambedu Nainarappan; Salhotra, Virender Singh; Vassall, Anna; Hoog, Anja van't
2017-01-01
Background India is considering the scale-up of the Xpert MTB/RIF assay for detection of tuberculosis (TB) and rifampicin resistance. We conducted an economic analysis to estimate the costs of different strategies of Xpert implementation in India. Methods Using a decision analytical model, we compared four diagnostic strategies for TB patients: (i) sputum smear microscopy (SSM) only; (ii) Xpert as a replacement for the rapid diagnostic test currently used for SSM-positive patients at risk of drug resistance (i.e. line probe assay (LPA)); (iii) Upfront Xpert testing for patients at risk of drug resistance; and (iv) Xpert as a replacement for SSM for all patients. Results The total costs associated with diagnosis for 100,000 presumptive TB cases were: (i) US$ 619,042 for SSM-only; (ii) US$ 575,377 in the LPA replacement scenario; (iii) US$ 720,523 in the SSM replacement scenario; and (iv) US$ 1,639,643 in the Xpert-for-all scenario. Total cohort costs, including treatment costs, increased by 46% from the SSM-only to the Xpert-for-all strategy, largely due to the costs associated with second-line treatment of a higher number of rifampicin-resistant patients due to increased drug-resistant TB (DR-TB) case detection. The diagnostic costs for an estimated 7.64 million presumptive TB patients would comprise (i) 19%, (ii) 17%, (iii) 22% and (iv) 50% of the annual TB control budget. Mean total costs, expressed per DR-TB case initiated on treatment, were lowest in the Xpert-for-all scenario (US$ 11,099). Conclusions The Xpert-for-all strategy would result in the greatest increase of TB and DR-TB case detection, but would also have the highest associated costs. The strategy of using Xpert only for patients at risk for DR-TB would be more affordable, but would miss DR-TB cases and the cost per true DR-TB case detected would be higher compared to the Xpert-for-all strategy. As such expanded Xpert strategy would require significant increased TB control budget to ensure that increased case detection is followed by appropriate care. PMID:28880875
Vlachopoulos, Lazaros; Lüthi, Marcel; Carrillo, Fabio; Gerber, Christian; Székely, Gábor; Fürnstahl, Philipp
2018-04-18
In computer-assisted reconstructive surgeries, the contralateral anatomy is established as the best available reconstruction template. However, existing intra-individual bilateral differences or a pathological, contralateral humerus may limit the applicability of the method. The aim of the study was to evaluate whether a statistical shape model (SSM) has the potential to predict accurately the pretraumatic anatomy of the humerus from the posttraumatic condition. Three-dimensional (3D) triangular surface models were extracted from the computed tomographic data of 100 paired cadaveric humeri without a pathological condition. An SSM was constructed, encoding the characteristic shape variations among the individuals. To predict the patient-specific anatomy of the proximal (or distal) part of the humerus with the SSM, we generated segments of the humerus of predefined length excluding the part to predict. The proximal and distal humeral prediction (p-HP and d-HP) errors, defined as the deviation of the predicted (bone) model from the original (bone) model, were evaluated. For comparison with the state-of-the-art technique, i.e., the contralateral registration method, we used the same segments of the humerus to evaluate whether the SSM or the contralateral anatomy yields a more accurate reconstruction template. The p-HP error (mean and standard deviation, 3.8° ± 1.9°) using 85% of the distal end of the humerus to predict the proximal humeral anatomy was significantly smaller (p = 0.001) compared with the contralateral registration method. The difference between the d-HP error (mean, 5.5° ± 2.9°), using 85% of the proximal part of the humerus to predict the distal humeral anatomy, and the contralateral registration method was not significant (p = 0.61). The restoration of the humeral length was not significantly different between the SSM and the contralateral registration method. SSMs accurately predict the patient-specific anatomy of the proximal and distal aspects of the humerus. The prediction errors of the SSM depend on the size of the healthy part of the humerus. The prediction of the patient-specific anatomy of the humerus is of fundamental importance for computer-assisted reconstructive surgeries.
Liu, Taoze; Li, Feili; Jin, Zhisheng; Yang, Yuangen
2018-07-01
A column leaching study, coupled with acid deposition simulation, was conducted to investigate the leaching of potentially toxic metals (PTM) from zinc smelting slag materials (SSM) after being incubated in an acid Alfisol for 120 days at room temperature. Two SSMs (SSM-A: acidic, 10 yrs exposure with moderate high PTM concentrations versus SSM-B: alkaline, 2 yrs exposure with extremely high PTM concentrations), were used for the incubation at 0.5, 1, 2.5, 5 wt% amendment ratios in triplicate. Five leaching events were conducted at day 1, 3, 7, 14, and 28, and the leaching of PTMs mainly occurred in the first three leaching events, with the highest PTM concentrations in leachate measured from 5 wt% SSM amendments. After leaching, 2.5, 12, 5.5, 14, 11, and 9 wt% of M3 extractable Pb, Zn, Cd, Co, Cr, and Ni could be released from 5 wt% SSM-A amended soils, being respectively 25, 12, 4, 2, 2, and 2 times more than those from 5 wt% SSM-B amended soils. In the leachates, the concentrations of PTMs were mostly affected by leachant pH and were closely correlated to the concentrations of Fe, Al, Ca, Mg and P with Cd, Pb, and Zn showing the most environmental concern. Visual MINTEQ 3.1 modeling suggested metallic ions and sulfate forms as the common chemical species of PTMs in the leachates; whereas, organic bound species showed importance for Cd, Pb, Cu, and Ni, and CdCl + was observed for Cd. Aluminum hydroxy, phosphate, and sulfate minerals prevailed as the saturated minerals, followed by chloropyromorphite (Pb 5 (PO 4 ) 3 Cl) and plumbogummite (PbAl 3 (PO 4 ) 2 (OH) 5 ·H 2 O) in the leachates. This study suggested that incubation of SSMs in acidic soil for a long term can enhance the release of PTMs as the forms of metallic ions and sulfate when subjected to acid deposition leaching. Copyright © 2018 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Mishra, Vikalp; Ellenburg, W. Lee; Griffin, Robert E.; Mecikalski, John R.; Cruise, James F.; Hain, Christopher R.; Anderson, Martha C.
2018-06-01
The Soil Moisture Active Passive (SMAP) mission is dedicated toward global soil moisture mapping. Typically, an L-band microwave radiometer has spatial resolution on the order of 36-40 km, which is too coarse for many specific hydro-meteorological and agricultural applications. With the failure of the SMAP active radar within three months of becoming operational, an intermediate (9-km) and finer (3-km) scale soil moisture product solely from the SMAP mission is no longer possible. Therefore, the focus of this study is a disaggregation of the 36-km resolution SMAP passive-only surface soil moisture (SSM) using the Soil Evaporative Efficiency (SEE) approach to spatial scales of 3-km and 9-km. The SEE was computed using thermal-infrared (TIR) estimation of surface evaporation over Continental U.S. (CONUS). The disaggregation results were compared with the 3 months of SMAP-Active (SMAP-A) and Active/Passive (AP) products, while comparisons with SMAP-Enhanced (SMAP-E), SMAP-Passive (SMAP-P), as well as with more than 180 Soil Climate Analysis Network (SCAN) stations across CONUS were performed for a 19 month period. At the 9-km spatial scale, the TIR-Downscaled data correlated strongly with the SMAP-E SSM both spatially (r = 0.90) and temporally (r = 0.87). In comparison with SCAN observations, overall correlations of 0.49 and 0.47; bias of -0.022 and -0.019 and unbiased RMSD of 0.105 and 0.100 were found for SMAP-E and TIR-Downscaled SSM across the Continental U.S., respectively. At 3-km scale, TIR-Downscaled and SMAP-A had a mean temporal correlation of only 0.27. In terms of gain statistics, the highest percentage of SCAN sites with positive gains (>55%) was observed with the TIR-Downscaled SSM at 9-km. Overall, the TIR-based downscaled SSM showed strong correspondence with SMAP-E; compared to SCAN, and overall both SMAP-E and TIR-Downscaled performed similarly, however, gain statistics show that TIR-Downscaled SSM slightly outperformed SMAP-E.
Introducing Systems Approaches
NASA Astrophysics Data System (ADS)
Reynolds, Martin; Holwell, Sue
Systems Approaches to Managing Change brings together five systems approaches to managing complex issues, each having a proven track record of over 25 years. The five approaches are: System Dynamics (SD) developed originally in the late 1950s by Jay Forrester Viable Systems Model (VSM) developed originally in the late 1960s by Stafford Beer Strategic Options Development and Analysis (SODA: with cognitive mapping) developed originally in the 1970s by Colin Eden Soft Systems Methodology (SSM) developed originally in the 1970s by Peter Checkland Critical Systems Heuristics (CSH) developed originally in the late 1970s by Werner Ulrich
Distinct Functional Roles of Cardiac Mitochondrial Subpopulations Revealed by a 3D Simulation Model
Hatano, Asuka; Okada, Jun-ichi; Washio, Takumi; Hisada, Toshiaki; Sugiura, Seiryo
2015-01-01
Experimental characterization of two cardiac mitochondrial subpopulations, namely, subsarcolemmal mitochondria (SSM) and interfibrillar mitochondria (IFM), has been hampered by technical difficulties, and an alternative approach is eagerly awaited. We previously developed a three-dimensional computational cardiomyocyte model that integrates electrophysiology, metabolism, and mechanics with subcellular structure. In this study, we further developed our model to include intracellular oxygen diffusion, and determined whether mitochondrial localization or intrinsic properties cause functional variations. For this purpose, we created two models: one with equal SSM and IFM properties and one with IFM having higher activity levels. Using these two models to compare the SSM and IFM responses of [Ca2+], tricarboxylic acid cycle activity, [NADH], and mitochondrial inner membrane potential to abrupt changes in pacing frequency (0.25–2 Hz), we found that the reported functional differences between these subpopulations appear to be mostly related to local [Ca2+] heterogeneity, and variations in intrinsic properties only serve to augment these differences. We also examined the effect of hypoxia on mitochondrial function. Under normoxic conditions, intracellular oxygen is much higher throughout the cell than the half-saturation concentration for oxidative phosphorylation. However, under limited oxygen supply, oxygen is mostly exhausted in SSM, leaving the core region in an anoxic condition. Reflecting this heterogeneous oxygen environment, the inner membrane potential continues to decrease in IFM, whereas it is maintained to nearly normal levels in SSM, thereby ensuring ATP supply to this region. Our simulation results provide clues to understanding the origin of functional variations in two cardiac mitochondrial subpopulations and their differential roles in maintaining cardiomyocyte function as a whole. PMID:26039174
Net, Sopheak; Rabodonirina, Suzanah; Sghaier, Rafika Ben; Dumoulin, David; Chbib, Chaza; Tlili, Ines; Ouddane, Baghdad
2015-07-15
Various drug residues, pesticides and phthalates are ubiquitous in the environment. Their presence in the environment has attracted considerable attention due to their potential impacts on ecosystem functioning and on public health. In this work, 14 drug residues, 24 pesticides and 6 phthalates have been quantified in three matrices (in the dissolved phase, associated to suspended solid matter (SSM), and in sediment) collected from fifteen watercourses and rivers located in a highly industrialized zone at the cross-border area of Northern France and Belgium. The extractions have been carried out using accelerated solvent extraction (ASE) for solid matrices (SSM and sediment) and using solid phase extraction (SPE) for liquid matrix. The final extract was analyzed using GC-MS technique. Among the three classes of compounds, phthalates have been found at highest level compared to pesticides and drug residues. The Σ6PAE concentrations were ranging from 17.2±2.58 to 179.1±26.9μgL(-1) in dissolved phase, from 2.9±0.4 to 21.1±3.2μgL(-1) in SSM and from 1.1±0.2 to 11.9±1.8μgg(-1)dw in sediment. The Σ14drug residue concentrations were lower than 1.3μgL(-1) in the dissolved phases, lower than 30ngL(-1) associated to SSM and from nondetectable levels to 60.7±9.1ngg(-1)dw in sediment. For pesticides, all compounds were below the LOQ values in dissolved phase and in sediment, and only EPTC could be quantified in SSM. Copyright © 2015 Elsevier B.V. All rights reserved.
Pian, Cong; Chen, Yuan-Yuan; Zhang, Jin; Chen, Zhi; Zhang, Guang-Le; Li, Qiang; Yang, Tao; Zhang, Liang-Yun
2017-02-01
Piwi-interacting RNAs (piRNAs) were recently discovered as endogenous small noncoding RNAs. Some recent research suggests that piRNAs may play an important role in cancer. So the precise identification of human piRNAs is a significant work. In this paper, we introduce a series of new features with 80 dimension called short sequence motifs (SSM). A hybrid feature vector with 1444 dimension can be formed by combining 1364 features of [Formula: see text]-mer strings and 80 features of SSM features. We optimize the 1444 dimension features using the feature score criterion (FSC) and list them in descending order according to the scores. The first 462 are selected as the input feature vector in the classifier. Moreover, eight of 80 SSM features appear in the top 20. This indicates that these eight SSM features play an important part in the identification of piRNAs. Since five of the above eight SSM features are associated with nucleotide A and G ('A*G', 'A**G', 'A***G', 'A****G', 'A*****G'). So, we guess there may exist some biological significance. We also use a neural network algorithm called voting-based extreme learning machine (V-ELM) to identify real piRNAs. The Specificity (Sp) and Sensitivity (Sn) of our method are 95.48% and 94.61%, respectively in human species. This result shows that our method is more effective compared with those of the piRPred, piRNApredictor, Asym-Pibomd, Piano and McRUMs. The web service of V-ELMpiRNAPred is available for free at http://mm20132014.wicp.net:38601/velmprepiRNA/Main.jsp .
Soliman, Sameh S. M.; Raizada, Manish N.
2012-01-01
Within a plant, there can exist an ecosystem of pathogens and endophytes, the latter described as bacterial and fungal inhabitants that thrive without causing disease to the host. Interactions between microbial inhabitants represent a novel area of study for natural products research. Here we analyzed the interactions between the fungal endophytes of Taxus (yew) trees. Fungal endophytes of Taxus have been proposed to produce the terpenoid secondary metabolite, Taxol, an anti-cancer drug. It is widely reported that plant extracts stimulate endophytic fungal Taxol production, but the underlying mechanism is not understood. Here, Taxus bark extracts stimulated fungal Taxol production 30-fold compared to a 10-fold induction with wood extracts. However, candidate plant-derived defense compounds (i.e., salicylic acid, benzoic acid) were found to act only as modest elicitors of fungal Taxol production from the endophytic fungus Paraconiothyrium SSM001, consistent with previous studies. We hypothesized the Taxus plant extracts may contain elicitors derived from other microbes inhabiting these tissues. We investigated the effects of co-culturing SSM001 with other fungi observed to inhabit Taxus bark, but not wood. Surprisingly, co-culture of SSM001 with a bark fungus (Alternaria) caused a ∼threefold increase in Taxol production. When SSM001 was pyramided with both the Alternaria endophyte along with another fungus (Phomopsis) observed to inhabit Taxus, there was an ∼eightfold increase in fungal Taxol production from SSM001. These results suggest that resident fungi within a host plant interact with one another to stimulate Taxol biosynthesis, either directly or through their metabolites. More generally, our results suggest that endophyte secondary metabolism should be studied in the context of its native ecosystem. PMID:23346084
Trends in the Sea Ice Cover Using Enhanced and Compatible AMSR-E, SSM/I and SMMR Data
NASA Technical Reports Server (NTRS)
Comiso, Josefino C.; Nishio, Fumihiko
2007-01-01
Arguably, the most remarkable manifestation of change in the polar regions is the rapid decline (of about -10 %/decade) in the Arctic perennial ice cover. Changes in the global sea ice cover, however, are more modest, being slightly positive in the Southern Hemisphere and slightly negative in the Northern Hemisphere, the significance of which has not been adequately assessed because of unknown errors in the satellite historical data. We take advantage of the recent and more accurate AMSR-E data to evaluate the true seasonal and interannual variability of the sea ice cover, assess the accuracy of historical data, and determine the real trend. Consistently derived ice concentrations from AMSR-E, SSM/I, and SMMR data were analyzed and a slight bias is observed between AMSR-E and SSM/I data mainly because of differences in resolution. Analysis of the combine SMMR, SSM/I and AMSR-E data set, with the bias corrected, shows that the trends in extent and area of sea ice in the Arctic region is -3.4 +/- 0.2 and -4.0 +/- 0.2 % per decade, respectively, while the corresponding values for the Antarctic region is 0.9 +/- 0.2 and 1.7 .+/- 0.3 % per decade. The higher resolution of the AMSR-E provides an improved determination of the location of the ice edge while the SSM/I data show an ice edge about 6 to 12 km further away from the ice pack. Although the current record of AMSR-E is less than 5 years, the data can be utilized in combination with historical data for more accurate determination of the variability and trends in the ice cover.
Mesdag, V; Régis, C; Tresch, E; Chauvet, M-P; Boulanger, L; Collinet, P; Giard, S
2017-10-01
The preservation of the nipple areolar complex (NAC) for cancer treatment is still a matter of debate because of suspected increase of local recurrence and surgery-specific complications. The aim of the study was to investigate both the relapse risk associated with nipple sparing mastectomy (NSM) for breast cancer and women's satisfaction with preservation of the NAC. We included retrospectively all patients who had skin-sparing mastectomy (SSM) or NSM from 2007 to 2012 for breast cancer or ductal carcinoma in situ (DCIS). We compared NSM and SSM group for oncological and surgical outcomes. Patients' satisfaction and quality of life has been evaluated by a specifically designed questionnaire. We included 63NSM (41.5%) and 89SM (58.5%). Eighty-nine (58.6%) patients had DCIS, and the other had small invasive disease. Median follow-up was 42 (IQR: 18-58) months. Local recurrence rate was 1.7% (n=1) in the NSM group and 0% in the SSM group without recurrence in the preserved nipple. After NSM, one patient had complete NAC necrosis, and three patients suffered partial necrosis. Satisfaction with the NAC was higher in the NSM group compared to the SSM group with delayed reconstruction of the nipple (75% vs. 59%, P=0.14). Patients with NSM required less psychological support before (P=0.028) and immediately after surgery (P=0.14) than patients in the SSM group. NSM can successfully and safely be performed for pre-invasive and small invasive breast cancer. Besides esthetic aspects, preserving the nipple may ease the acceptance of these radical form of surgery. Copyright © 2017 Elsevier Masson SAS. All rights reserved.
NASA Technical Reports Server (NTRS)
Greenwald, Thomas J.; Christopher, Sundar A.; Chou, Joyce
1997-01-01
Satellite observations of the cloud liquid water path (LWP) are compared from special sensor microwave imager (SSM/I) measurements and GOES 8 imager solar reflectance (SR) measurements to ascertain the impact of sub-field-of-view (FOV) cloud effects on SSM/I 37 GHz retrievals. The SR retrievals also incorporate estimates of the cloud droplet effective radius derived from the GOES 8 3.9-micron channel. The comparisons consist of simultaneous collocated and full-resolution measurements and are limited to nonprecipitating marine stratocumulus in the eastern Pacific for two days in October 1995. The retrievals from these independent methods are consistent for overcast SSM/I FOVS, with RMS differences as low as 0.030 kg/sq m, although biases exist for clouds with more open spatial structure, where the RMS differences increase to 0.039 kg/sq m. For broken cloudiness within the SSM/I FOV the average beam-filling error (BFE) in the microwave retrievals is found to be about 22% (average cloud amount of 73%). This systematic error is comparable with the average random errors in the microwave retrievals. However, even larger BFEs can be expected for individual FOVs and for regions with less cloudiness. By scaling the microwave retrievals by the cloud amount within the FOV, the systematic BFE can be significantly reduced but with increased RMS differences of O.046-0.058 kg/sq m when compared to the SR retrievals. The beam-filling effects reported here are significant and are expected to impact directly upon studies that use instantaneous SSM/I measurements of cloud LWP, such as cloud classification studies and validation studies involving surface-based or in situ data.
Bouillon, Céline; Léandri, Roger; Desch, Laurent; Ernst, Alexandra; Bruno, Céline; Cerf, Charline; Chiron, Alexandra; Souchay, Céline; Burguet, Antoine; Jimenez, Clément; Sagot, Paul; Fauque, Patricia
2016-01-01
In animal studies, extensive data revealed the influence of culture medium on embryonic development, foetal growth and the behaviour of offspring. However, this impact has never been investigated in humans. For the first time, we investigated in depth the effects of embryo culture media on health, growth and development of infants conceived by In Vitro Fertilization until the age of 5 years old. This single-centre cohort study was based on an earlier randomized study. During six months, in vitro fertilization attempts (No. 371) were randomized according to two media (Single Step Medium--SSM group) or Global medium (Global group). This randomized study was stopped prematurely as significantly lower pregnancy and implantation rates were observed in the SSM group. Singletons (No. 73) conceived in the randomized study were included (42 for Global and 31 for SSM). The medical data for gestational, neonatal and early childhood periods were extracted from medical records and parental interviews (256 variables recorded). The developmental profiles of the children in eight domains (social, self-help, gross motor, fine motor, expressive language, language comprehension, letter knowledge and number knowledge--270 items) were compared in relation to the culture medium. The delivery rate was significantly lower in the SSM group than in the Global group (p<0.05). The culture medium had no significant effect on birthweight, risk of malformation (minor and major), growth and the frequency of medical concerns. However, the children of the Global group were less likely than those of the SSM group to show developmental problems (p = 0.002), irrespective of the different domains. In conclusion, our findings showed that the embryo culture medium may have an impact on further development.
NASA Technical Reports Server (NTRS)
Neale, Christopher M. U.; Mcdonnell, Jeffrey J.; Ramsey, Douglas; Hipps, Lawrence; Tarboton, David
1993-01-01
Since the launch of the DMSP Special Sensor Microwave/Imager (SSM/I), several algorithms have been developed to retrieve overland parameters. These include the present operational algorithms resulting from the Navy calibration/validation effort such as land surface type (Neale et al. 1990), land surface temperature (McFarland et al. 1990), surface moisture (McFarland and Neale, 1991) and snow parameters (McFarland and Neale, 1991). In addition, other work has been done including the classification of snow cover and precipitation using the SSM/I (Grody, 1991). Due to the empirical nature of most of the above mentioned algorithms, further research is warranted and improvements can probably be obtained through a combination of radiative transfer modelling to study the physical processes governing the microwave emissions at the SSM/I frequencies, and the incorporation of additional ground truth data and special cases into the regression data sets. We have proposed specifically to improve the retrieval of surface moisture and snow parameters using the WetNet SSM/I data sets along with ground truth information namely climatic variables from the NOAA cooperative network of weather stations as well as imagery from other satellite sensors such as the AVHRR and Thematic Mapper. In the case of surface moisture retrievals the characterization of vegetation density is of primary concern. The higher spatial resolution satellite imagery collected at concurrent periods will be used to characterize vegetation types and amounts which, along with radiative transfer modelling should lead to more physically based retrievals. Snow parameter retrieval algorithm improvement will initially concentrate on the classification of snowpacks (dry snow, wet snow, refrozen snow) and later on specific products such as snow water equivalent. Significant accomplishments in the past year are presented.