Applying dynamic simulation modeling methods in health care delivery research-the SIMULATE checklist: report of the ISPOR simulation modeling emerging good practices task force.

PubMed

Marshall, Deborah A; Burgos-Liz, Lina; IJzerman, Maarten J; Osgood, Nathaniel D; Padula, William V; Higashi, Mitchell K; Wong, Peter K; Pasupathy, Kalyan S; Crown, William

2015-01-01

Health care delivery systems are inherently complex, consisting of multiple tiers of interdependent subsystems and processes that are adaptive to changes in the environment and behave in a nonlinear fashion. Traditional health technology assessment and modeling methods often neglect the wider health system impacts that can be critical for achieving desired health system goals and are often of limited usefulness when applied to complex health systems. Researchers and health care decision makers can either underestimate or fail to consider the interactions among the people, processes, technology, and facility designs. Health care delivery system interventions need to incorporate the dynamics and complexities of the health care system context in which the intervention is delivered. This report provides an overview of common dynamic simulation modeling methods and examples of health care system interventions in which such methods could be useful. Three dynamic simulation modeling methods are presented to evaluate system interventions for health care delivery: system dynamics, discrete event simulation, and agent-based modeling. In contrast to conventional evaluations, a dynamic systems approach incorporates the complexity of the system and anticipates the upstream and downstream consequences of changes in complex health care delivery systems. This report assists researchers and decision makers in deciding whether these simulation methods are appropriate to address specific health system problems through an eight-point checklist referred to as the SIMULATE (System, Interactions, Multilevel, Understanding, Loops, Agents, Time, Emergence) tool. It is a primer for researchers and decision makers working in health care delivery and implementation sciences who face complex challenges in delivering effective and efficient care that can be addressed with system interventions. On reviewing this report, the readers should be able to identify whether these simulation modeling methods are appropriate to answer the problem they are addressing and to recognize the differences of these methods from other modeling approaches used typically in health technology assessment applications. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

What can formal methods offer to digital flight control systems design

NASA Technical Reports Server (NTRS)

Good, Donald I.

1990-01-01

Formal methods research begins to produce methods which will enable mathematic modeling of the physical behavior of digital hardware and software systems. The development of these methods directly supports the NASA mission of increasing the scope and effectiveness of flight system modeling capabilities. The conventional, continuous mathematics that is used extensively in modeling flight systems is not adequate for accurate modeling of digital systems. Therefore, the current practice of digital flight control system design has not had the benefits of extensive mathematical modeling which are common in other parts of flight system engineering. Formal methods research shows that by using discrete mathematics, very accurate modeling of digital systems is possible. These discrete modeling methods will bring the traditional benefits of modeling to digital hardware and hardware design. Sound reasoning about accurate mathematical models of flight control systems can be an important part of reducing risk of unsafe flight control.

One output function: a misconception of students studying digital systems - a case study

NASA Astrophysics Data System (ADS)

Trotskovsky, E.; Sabag, N.

2015-05-01

Background:Learning processes are usually characterized by students' misunderstandings and misconceptions. Engineering educators intend to help their students overcome their misconceptions and achieve correct understanding of the concept. This paper describes a misconception in digital systems held by many students who believe that combinational logic circuits should have only one output. Purpose:The current study aims to investigate the roots of the misconception about one-output function and the pedagogical methods that can help students overcome the misconception. Sample:Three hundred and eighty-one students in the Departments of Electrical and Electronics and Mechanical Engineering at an academic engineering college, who learned the same topics of a digital combinational system, participated in the research. Design and method:In the initial research stage, students were taught according to traditional method - first to design a one-output combinational logic system, and then to implement a system with a number of output functions. In the main stage, an experimental group was taught using a new method whereby they were shown how to implement a system with several output functions, prior to learning about one-output systems. A control group was taught using the traditional method. In the replication stage (the third stage), an experimental group was taught using the new method. A mixed research methodology was used to examine the results of the new learning method. Results:Quantitative research showed that the new teaching approach resulted in a statistically significant decrease in student errors, and qualitative research revealed students' erroneous thinking patterns. Conclusions:It can be assumed that the traditional teaching method generates an incorrect mental model of the one-output function among students. The new pedagogical approach prevented the creation of an erroneous mental model and helped students develop the correct conceptual understanding.

Validation of Digital Systems in Avionics and Flight Control Applications Handbook. Volume 1.

DTIC Science & Technology

1983-07-01

will also be available to Airways Facilities, Systems Research and Development Service, Air Traffic Control Service, and Flight Standards elements...2114, March 12-14, 1979. 3. Validation Methods Research for Fault-Tolerant Avionics and Control Systems-- *r Working Group Meeting II, NASA...command generation with the multiple methods becoming avail- able for closure of the outer control loop necessitates research on alternative integration

Evaluation of a Standardized Method of Quality Assurance in Mental Health Records: A Pilot Study

ERIC Educational Resources Information Center

Bradshaw, Kelsey M.; Donohue, Bradley; Fayeghi, Jasmine; Lee, Tiffany; Wilks, Chelsey R.; Ross, Brendon

2016-01-01

The widespread adoption of research-supported treatments by mental health providers has facilitated empirical development of quality assurance (QA) methods. Research in this area has focused on QA systems aimed at assuring the integrity of research-supported treatment implementation, while examination of QA systems to assure appropriate…

Validation and Improvement of Reliability Methods for Air Force Building Systems

DTIC Science & Technology

focusing primarily on HVAC systems . This research used contingency analysis to assess the performance of each model for HVAC systems at six Air Force...probabilistic model produced inflated reliability calculations for HVAC systems . In light of these findings, this research employed a stochastic method, a...Nonhomogeneous Poisson Process (NHPP), in an attempt to produce accurate HVAC system reliability calculations. This effort ultimately concluded that

Mixed methods for implementation research: application to evidence-based practice implementation and staff turnover in community-based organizations providing child welfare services.

PubMed

Aarons, Gregory A; Fettes, Danielle L; Sommerfeld, David H; Palinkas, Lawrence A

2012-02-01

Many public sector service systems and provider organizations are in some phase of learning about or implementing evidence-based interventions. Child welfare service systems represent a context where implementation spans system, management, and organizational concerns. Research utilizing mixed methods that combine qualitative and quantitative design, data collection, and analytic approaches are particularly well suited to understanding both the process and outcomes of dissemination and implementation efforts in child welfare systems. This article describes the process of using mixed methods in implementation research and provides an applied example of an examination of factors impacting staff retention during an evidence-based intervention implementation in a statewide child welfare system. The authors integrate qualitative data with previously published quantitative analyses of job autonomy and staff turnover during this statewide implementation project in order to illustrate the utility of mixed method approaches in providing a more comprehensive understanding of opportunities and challenges in implementation research.

Mixed Methods for Implementation Research: Application to Evidence-Based Practice Implementation and Staff Turnover in Community Based Organizations Providing Child Welfare Services

PubMed Central

Aarons, Gregory A.; Fettes, Danielle L.; Sommerfeld, David H.; Palinkas, Lawrence

2013-01-01

Many public sector services systems and provider organizations are in some phase of learning about or implementing evidence-based interventions. Child welfare service systems represent a context where implementation spans system, management, and organizational concerns. Research utilizing mixed methods that combine qualitative and quantitative design, data collection, and analytic approaches are particularly well-suited to understanding both the process and outcomes of dissemination and implementation efforts in child welfare systems. This paper describes the process of using mixed methods in implementation research and provides an applied example of an examination of factors impacting staff retention during an evidence-based intervention implementation in a statewide child welfare system. We integrate qualitative data with previously published quantitative analyses of job autonomy and staff turnover during this statewide implementation project in order to illustrate the utility of mixed method approaches in providing a more comprehensive understanding of opportunities and challenges in implementation research. PMID:22146861

Conducting On-Farm Animal Research: Procedures & Economic Analysis.

ERIC Educational Resources Information Center

Amir, Pervaiz; Knipscheer, Hendrik C.

This book is intended to give animal scientists elementary tools to perform on-farm livestock analysis and to provide crop-oriented farming systems researchers with methods for conducting animal research. Chapter 1 describes farming systems research as a systems approach to on-farm animal research. Chapter 2 outlines some important…

Comparison of Biophysical Characteristics and Predicted Thermophysiological Responses of Three Prototype Body Armor Systems Versus Baseline U.S. Army Body Armor Systems

DTIC Science & Technology

2015-06-19

effective and scientifically valid method of making comparisons of clothing and equipment changes prior to conducting human research. predictive modeling...valid method of making comparisons of clothing and equipment changes prior to conducting human research. 2 INTRODUCTION Modern day...clothing and equipment changes prior to conducting human research. METHODS Ensembles Three different body armor (BA) plus clothing ensembles were

The Development of Online Tutorial Program Design Using Problem-Based Learning in Open Distance Learning System

ERIC Educational Resources Information Center

Said, Asnah; Syarif, Edy

2016-01-01

This research aimed to evaluate of online tutorial program design by applying problem-based learning Research Methods currently implemented in the system of Open Distance Learning (ODL). The students must take a Research Methods course to prepare themselves for academic writing projects. Problem-based learning basically emphasizes the process of…

[Establishment of prescription research technology system in Chinese medicine secondary exploitation based on "component structure" theory].

PubMed

Cheng, Xu-Dong; Feng, Liang; Gu, Jun-Fei; Zhang, Ming-Hua; Jia, Xiao-Bin

2014-11-01

Chinese medicine prescriptions are the wisdom outcomes of traditional Chinese medicine (TCM) clinical treatment determinations which based on differentiation of symptoms and signs. Chinese medicine prescriptions are also the basis of secondary exploitation of TCM. The study on prescription helps to understand the material basis of its efficacy, pharmacological mechanism, which is an important guarantee for the modernization of traditional Chinese medicine. Currently, there is not yet dissertation n the method and technology system of basic research on the prescription of Chinese medicine. This paper focuses on how to build an effective system of prescription research technology. Based on "component structure" theory, a technology system contained four-step method that "prescription analysis, the material basis screening, the material basis of analysis and optimization and verify" was proposed. The technology system analyzes the material basis of the three levels such as Chinese medicine pieces, constituents and the compounds which could respect the overall efficacy of Chinese medicine. Ideas of prescription optimization, remodeling are introduced into the system. The technology system is the combination of the existing research and associates with new techniques and methods, which used for explore the research thought suitable for material basis research and prescription remodeling. The system provides a reference for the secondary development of traditional Chinese medicine, and industrial upgrading.

A reflective lens: applying critical systems thinking and visual methods to ecohealth research.

PubMed

Cleland, Deborah; Wyborn, Carina

2010-12-01

Critical systems methodology has been advocated as an effective and ethical way to engage with the uncertainty and conflicting values common to ecohealth problems. We use two contrasting case studies, coral reef management in the Philippines and national park management in Australia, to illustrate the value of critical systems approaches in exploring how people respond to environmental threats to their physical and spiritual well-being. In both cases, we used visual methods--participatory modeling and rich picturing, respectively. The critical systems methodology, with its emphasis on reflection, guided an appraisal of the research process. A discussion of these two case studies suggests that visual methods can be usefully applied within a critical systems framework to offer new insights into ecohealth issues across a diverse range of socio-political contexts. With this article, we hope to open up a conversation with other practitioners to expand the use of visual methods in integrated research.

METAL SPECIATION IN SOIL, SEDIMENT, AND WATER SYSTEMS VIA SYNCHROTRON RADIATION RESEARCH

EPA Science Inventory

Metal contaminated environmental systems (soils, sediments, and water) have challenged researchers for many years. Traditional methods of analysis have employed extraction methods to determine total metal content and define risk based on the premise that as metal concentration in...

Activity Theory in Information Systems Research and Practice: Theoretical Underpinnings for an Information Systems Development Model

ERIC Educational Resources Information Center

Mursu, Anja; Luukkonen, Irmeli; Toivanen, Marika; Korpela, Mikko

2007-01-01

Introduction: The purpose of information systems is to facilitate work activities: here we consider how Activity Theory can be applied in information systems development. Method. The requirements for an analytical model for emancipatory, work-oriented information systems research and practice are specified. Previous research work in Activity…

The Development of the Navigation System for Visually Impaired Persons

DTIC Science & Technology

2001-10-25

method) is used in our system. In this papaer , we re- fer to the developed methods which are the positioning method without DGPS and the method of the...University Kanagawa, Japan Performing Organization Report Number Sponsoring/Monitoring Agency Name(s) and Address(es) US Army Research , Development...impaired. ACKNOWLEDGMENT This research was partially supported by the Ministry of Education, Science, Sports and Culture, Grant-in-Aid for Scienti c

How Management Information Systems Can Enhance the Air Force Drug Testing Program

DTIC Science & Technology

1989-12-01

promising processes to positively identify potential system users (46:401). Scope This study will cover issues concerning the Air Force drug testing...7 Scope....................10 Limitations of the Research . . . 10 Investigative Questions ............ 10 Expected Benefits of the Study . . . . 11...Resource Allocation. ....... 41 M1.>ethodology....................44 The Historical Research Method . . .. 44 The Historical Research Method for this Study

The Delphi Method for Graduate Research

ERIC Educational Resources Information Center

Skulmoski, Gregory J.; Hartman, Francis T.; Krahn, Jennifer

2007-01-01

The Delphi method is an attractive method for graduate students completing masters and PhD level research. It is a flexible research technique that has been successfully used in our program at the University of Calgary to explore new concepts within and outside of the information systems body of knowledge. The Delphi method is an iterative process…

Research in Distance Education: A System Modeling Approach.

ERIC Educational Resources Information Center

Saba, Farhad; Twitchell, David

1988-01-01

Describes how a computer simulation research method can be used for studying distance education systems. Topics discussed include systems research in distance education; a technique of model development using the System Dynamics approach and DYNAMO simulation language; and a computer simulation of a prototype model. (18 references) (LRW)

W.a.w (we are watching) smart app: accommodating social perception towards public officers’ performance

NASA Astrophysics Data System (ADS)

Widhoyoko, S. A.; Sasmoko; Nasir, L. A.; Manalu, S. R.; Indrianti, Y.

2018-03-01

This research is a continuation of previous research that is corruption early prevention is expanded by using expert system to analyze data and produce information to build decision. The research method used is neuroresearch method through three stages of research, namely exploratory stage, explanatory stage and confirmatory stages. The exploratory research finds W.aW’s Principles and W.a.W’s Units of Assessment as the basis for the preparation of the application. Stages of explanatory research in the form of W.a.W’s design of IT and confirmatory research stages are the design of expert system W.a.W. Expert System uses this formulation to generate dynamic standard value for each category and current social perception.

NASA Formal Methods Workshop, 1990

NASA Technical Reports Server (NTRS)

Butler, Ricky W. (Compiler)

1990-01-01

The workshop brought together researchers involved in the NASA formal methods research effort for detailed technical interchange and provided a mechanism for interaction with representatives from the FAA and the aerospace industry. The workshop also included speakers from industry to debrief the formal methods researchers on the current state of practice in flight critical system design, verification, and certification. The goals were: define and characterize the verification problem for ultra-reliable life critical flight control systems and the current state of practice in industry today; determine the proper role of formal methods in addressing these problems, and assess the state of the art and recent progress toward applying formal methods to this area.

JPRS Report, Science & Technology, Japan

DTIC Science & Technology

1988-10-05

collagen, we are conducting research on the immobilization, through chemical bond rather than physical absorption , of collagen on synthetic material...of a large number of samples are conducted by using automated apparatus and enzymatic reagents, it is natural to devise a method to use natural...improvement of enzymatic analytical methods ; 3) development of reaction system and instrumentation system; 4) research on sample treatment methods ; and

Improving Defense Health Program Medical Research Processes

DTIC Science & Technology

2017-08-08

needed for DHP medical research , such as the Army’s Clinical and Translational Research Program Office, 38 the Navy’s Research Methods Training Program... research stated, “key infrastructure for a learning health system will encompass three core elements: data networks, methods , and workforce.” 221 A 2012... Research Methods Training Program, 132 which will be further discussed in Appendix D.2. AIR FORCE Air Force Instruction 40-402, Protection of

The CSM testbed software system: A development environment for structural analysis methods on the NAS CRAY-2

NASA Technical Reports Server (NTRS)

Gillian, Ronnie E.; Lotts, Christine G.

1988-01-01

The Computational Structural Mechanics (CSM) Activity at Langley Research Center is developing methods for structural analysis on modern computers. To facilitate that research effort, an applications development environment has been constructed to insulate the researcher from the many computer operating systems of a widely distributed computer network. The CSM Testbed development system was ported to the Numerical Aerodynamic Simulator (NAS) Cray-2, at the Ames Research Center, to provide a high end computational capability. This paper describes the implementation experiences, the resulting capability, and the future directions for the Testbed on supercomputers.

Development and Application of an Integrated Approach toward NASA Airspace Systems Research

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Fong, Robert K.; Abramson, Paul D.; Koenke, Ed

2008-01-01

The National Aeronautics and Space Administration's (NASA) Airspace Systems Program is contributing air traffic management research in support of the 2025 Next Generation Air Transportation System (NextGen). Contributions support research and development needs provided by the interagency Joint Planning and Development Office (JPDO). These needs generally call for integrated technical solutions that improve system-level performance and work effectively across multiple domains and planning time horizons. In response, the Airspace Systems Program is pursuing an integrated research approach and has adapted systems engineering best practices for application in a research environment. Systems engineering methods aim to enable researchers to methodically compare different technical approaches, consider system-level performance, and develop compatible solutions. Systems engineering activities are performed iteratively as the research matures. Products of this approach include a demand and needs analysis, system-level descriptions focusing on NASA research contributions, system assessment and design studies, and common systemlevel metrics, scenarios, and assumptions. Results from the first systems engineering iteration include a preliminary demand and needs analysis; a functional modeling tool; and initial system-level metrics, scenario characteristics, and assumptions. Demand and needs analysis results suggest that several advanced concepts can mitigate demand/capacity imbalances for NextGen, but fall short of enabling three-times current-day capacity at the nation s busiest airports and airspace. Current activities are focusing on standardizing metrics, scenarios, and assumptions, conducting system-level performance assessments of integrated research solutions, and exploring key system design interfaces.

Assessment of Web-Based Authentication Methods in the U.S.: Comparing E-Learning Systems to Internet Healthcare Information Systems

ERIC Educational Resources Information Center

Mattord, Herbert J.

2012-01-01

Organizations continue to rely on password-based authentication methods to control access to many Web-based systems. This research study developed a benchmarking instrument intended to assess authentication methods used in Web-based information systems (IS). It developed an Authentication Method System Index (AMSI) to analyze collected data from…

Integrating qualitative research methods into care improvement efforts within a learning health system: addressing antibiotic overuse.

PubMed

Munoz-Plaza, Corrine E; Parry, Carla; Hahn, Erin E; Tang, Tania; Nguyen, Huong Q; Gould, Michael K; Kanter, Michael H; Sharp, Adam L

2016-08-15

Despite reports advocating for integration of research into healthcare delivery, scant literature exists describing how this can be accomplished. Examples highlighting application of qualitative research methods embedded into a healthcare system are particularly needed. This article describes the process and value of embedding qualitative research as the second phase of an explanatory, sequential, mixed methods study to improve antibiotic stewardship for acute sinusitis. Purposive sampling of providers for in-depth interviews improved understanding of unwarranted antibiotic prescribing and elicited stakeholder recommendations for improvement. Qualitative data collection, transcription and constant comparative analyses occurred iteratively. Emerging themes and sub-themes identified primary drivers of unwarranted antibiotic prescribing patterns and recommendations for improving practice. These findings informed the design of a health system intervention to improve antibiotic stewardship for acute sinusitis. Core components of the intervention are also described. Qualitative research can be effectively applied in learning healthcare systems to elucidate quantitative results and inform improvement efforts.

Implementation of Particle Swarm Optimization Method for Voltage Stability Analysis in 150 kV Sub System Grati – Paiton East Java

NASA Astrophysics Data System (ADS)

Kusumaningtyas, A. B.; Hidayat, M. N.; Ronilaya, F.

2018-04-01

Based on the data from State Electric Company on 15 January 2013, the undistributed power in the 150 kV sub system Grati-Paiton Region IV, that consist of 26 bus 150 kV and 2 bus generation 500 kV system, was recorded 3.286,00 MW. At the same time, the frequency of the system was down to 49 Hz. This lead to a deficit generation and unstable voltage condition in the system. Fast Voltage Stability Index (FVSI) method is used in this research to analyze the voltage stability of the buses. For buses with unstable voltage condition, reactive power will be injected through capacitor installation. The site where the capacitor will be installed is determined using the Fast Voltage Stability Index (FVSI) method while the size of the capacitor is determined using the Particle Swarm Optimization (PSO) method. The PSO method has been applied in some researches, such as to determine optimal placement and sizing in radial distribution network as well as in transmission network.. In this research, the PSO method is used to find the Qloss of an interconnection transmission system, which in turn, the value of the Qloss is used to determine the capacitance of the capacitor needed by the system.

Understanding the value of mixed methods research: the Children’s Safety Initiative-Emergency Medical Services

PubMed Central

Hansen, Matthew; O’Brien, Kerth; Meckler, Garth; Chang, Anna Marie; Guise, Jeanne-Marie

2016-01-01

Mixed methods research has significant potential to broaden the scope of emergency care and specifically emergency medical services investigation. Mixed methods studies involve the coordinated use of qualitative and quantitative research approaches to gain a fuller understanding of practice. By combining what is learnt from multiple methods, these approaches can help to characterise complex healthcare systems, identify the mechanisms of complex problems such as medical errors and understand aspects of human interaction such as communication, behaviour and team performance. Mixed methods approaches may be particularly useful for out-of-hospital care researchers because care is provided in complex systems where equipment, interpersonal interactions, societal norms, environment and other factors influence patient outcomes. The overall objectives of this paper are to (1) introduce the fundamental concepts and approaches of mixed methods research and (2) describe the interrelation and complementary features of the quantitative and qualitative components of mixed methods studies using specific examples from the Children’s Safety Initiative-Emergency Medical Services (CSI-EMS), a large National Institutes of Health-funded research project conducted in the USA. PMID:26949970

caTIES: a grid based system for coding and retrieval of surgical pathology reports and tissue specimens in support of translational research.

PubMed

Crowley, Rebecca S; Castine, Melissa; Mitchell, Kevin; Chavan, Girish; McSherry, Tara; Feldman, Michael

2010-01-01

The authors report on the development of the Cancer Tissue Information Extraction System (caTIES)--an application that supports collaborative tissue banking and text mining by leveraging existing natural language processing methods and algorithms, grid communication and security frameworks, and query visualization methods. The system fills an important need for text-derived clinical data in translational research such as tissue-banking and clinical trials. The design of caTIES addresses three critical issues for informatics support of translational research: (1) federation of research data sources derived from clinical systems; (2) expressive graphical interfaces for concept-based text mining; and (3) regulatory and security model for supporting multi-center collaborative research. Implementation of the system at several Cancer Centers across the country is creating a potential network of caTIES repositories that could provide millions of de-identified clinical reports to users. The system provides an end-to-end application of medical natural language processing to support multi-institutional translational research programs.

Problems Discovery of Final Graduation Projects During the Software Development Processes

NASA Astrophysics Data System (ADS)

Al-Hagery, Mohammed Abdullah Hassan

2012-01-01

The traditional techniques and methods used by students during systems development at the College of Computer, Qassim University is leading to this study. It leads to identify problems that hinder the construction and development of information systems, and identify their causes. The most important stages of systems development are analysis and design, which represent a solid foundation to build strong systems that are free from errors. The motivation of this research is the existence of many problems that impede getting exact output after the development of systems by the university graduates within departments of computer. The research concentrates on discovering the problems during the development tasks. The required data were collected using a questionnaire method, which formulated and judged and distributed to the target population. The research results were analyzed by three statistic methods.

Experimental research of flow servo-valve

NASA Astrophysics Data System (ADS)

Takosoglu, Jakub

Positional control of pneumatic drives is particularly important in pneumatic systems. Some methods of positioning pneumatic cylinders for changeover and tracking control are known. Choking method is the most development-oriented and has the greatest potential. An optimal and effective method, particularly when applied to pneumatic drives, has been searched for a long time. Sophisticated control systems with algorithms utilizing artificial intelligence methods are designed therefor. In order to design the control algorithm, knowledge about real parameters of servo-valves used in control systems of electro-pneumatic servo-drives is required. The paper presents the experimental research of flow servo-valve.

Key issues and technical route of cyber physical distribution system

NASA Astrophysics Data System (ADS)

Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

2017-01-01

Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

Knowledge Acquisition for Expert Systems in Construction

DTIC Science & Technology

1988-12-01

following scientific personnel have been closely involved in the execution of this research : Dr R J Allwood Mr A E Bryman Mr C N Cooper Dr J Cullen Mr...alternative methods and should use them flexibly as the position unfolds. This approach has been advocated by other researchers (eg Cordingley - see Diaper...currently engaged in research into methods of knowledge acquisition for expert systems. Although their original focus was on construction industry

Development of on-line monitoring system for Nuclear Power Plant (NPP) using neuro-expert, noise analysis, and modified neural networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Subekti, M.; Center for Development of Reactor Safety Technology, National Nuclear Energy Agency of Indonesia, Puspiptek Complex BO.80, Serpong-Tangerang, 15340; Ohno, T.

2006-07-01

The neuro-expert has been utilized in previous monitoring-system research of Pressure Water Reactor (PWR). The research improved the monitoring system by utilizing neuro-expert, conventional noise analysis and modified neural networks for capability extension. The parallel method applications required distributed architecture of computer-network for performing real-time tasks. The research aimed to improve the previous monitoring system, which could detect sensor degradation, and to perform the monitoring demonstration in High Temperature Engineering Tested Reactor (HTTR). The developing monitoring system based on some methods that have been tested using the data from online PWR simulator, as well as RSG-GAS (30 MW research reactormore » in Indonesia), will be applied in HTTR for more complex monitoring. (authors)« less

A review on classification methods for solving fully fuzzy linear systems

NASA Astrophysics Data System (ADS)

Daud, Wan Suhana Wan; Ahmad, Nazihah; Aziz, Khairu Azlan Abd

2015-12-01

Fully Fuzzy Linear System (FFLS) exists when there are fuzzy numbers on both sides of the linear systems. This system is quite significant today since most of the linear systems play with uncertainties of parameters especially in mathematics, engineering and finance. Many researchers and practitioners used the FFLS to model their problem and they apply various methods to solve it. In this paper, we present the outcome of a comprehensive review that we have done on various methods used for solving the FFLS. We classify our findings based on parameters' type used for the FFLS either restricted or unrestricted. We also discuss some of the methods by illustrating numerical examples and identify the differences between the methods. Ultimately, we summarize all findings in a table. We hope this study will encourage researchers to appreciate the use of this method and with that it will be easier for them to choose the right method or to propose any new method for solving the FFLS.

Verification and Validation of Neural Networks for Aerospace Systems

NASA Technical Reports Server (NTRS)

Mackall, Dale; Nelson, Stacy; Schumman, Johann; Clancy, Daniel (Technical Monitor)

2002-01-01

The Dryden Flight Research Center V&V working group and NASA Ames Research Center Automated Software Engineering (ASE) group collaborated to prepare this report. The purpose is to describe V&V processes and methods for certification of neural networks for aerospace applications, particularly adaptive flight control systems like Intelligent Flight Control Systems (IFCS) that use neural networks. This report is divided into the following two sections: 1) Overview of Adaptive Systems; and 2) V&V Processes/Methods.

Verification and Validation of Neural Networks for Aerospace Systems

NASA Technical Reports Server (NTRS)

Mackall, Dale; Nelson, Stacy; Schumann, Johann

2002-01-01

The Dryden Flight Research Center V&V working group and NASA Ames Research Center Automated Software Engineering (ASE) group collaborated to prepare this report. The purpose is to describe V&V processes and methods for certification of neural networks for aerospace applications, particularly adaptive flight control systems like Intelligent Flight Control Systems (IFCS) that use neural networks. This report is divided into the following two sections: Overview of Adaptive Systems and V&V Processes/Methods.

Application of AI methods to aircraft guidance and control

NASA Technical Reports Server (NTRS)

Hueschen, Richard M.; Mcmanus, John W.

1988-01-01

A research program for integrating artificial intelligence (AI) techniques with tools and methods used for aircraft flight control system design, development, and implementation is discussed. The application of the AI methods for the development and implementation of the logic software which operates with the control mode panel (CMP) of an aircraft is presented. The CMP is the pilot control panel for the automatic flight control system of a commercial-type research aircraft of Langley Research Center's Advanced Transport Operating Systems (ATOPS) program. A mouse-driven color-display emulation of the CMP, which was developed with AI methods and used to test the AI software logic implementation, is discussed. The operation of the CMP was enhanced with the addition of a display which was quickly developed with AI methods. The display advises the pilot of conditions not satisfied when a mode does not arm or engage. The implementation of the CMP software logic has shown that the time required to develop, implement, and modify software systems can be significantly reduced with the use of the AI methods.

Real-time fault diagnosis for propulsion systems

NASA Technical Reports Server (NTRS)

Merrill, Walter C.; Guo, Ten-Huei; Delaat, John C.; Duyar, Ahmet

1991-01-01

Current research toward real time fault diagnosis for propulsion systems at NASA-Lewis is described. The research is being applied to both air breathing and rocket propulsion systems. Topics include fault detection methods including neural networks, system modeling, and real time implementations.

Research Methodologies Explored for a Paradigm Shift in University Teaching.

ERIC Educational Resources Information Center

Venter, I. M.; Blignaut, R. J.; Stoltz, D.

2001-01-01

Innovative teaching methods such as collaborative learning, teamwork, and mind maps were introduced to teach computer science and statistics courses at a South African university. Soft systems methodology was adapted and used to manage the research process of evaluating the effectiveness of the teaching methods. This research method provided proof…

A Review of Transmission Diagnostics Research at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Zakajsek, James J.

1994-01-01

This paper presents a summary of the transmission diagnostics research work conducted at NASA Lewis Research Center over the last four years. In 1990, the Transmission Health and Usage Monitoring Research Team at NASA Lewis conducted a survey to determine the critical needs of the diagnostics community. Survey results indicated that experimental verification of gear and bearing fault detection methods, improved fault detection in planetary systems, and damage magnitude assessment and prognostics research were all critical to a highly reliable health and usage monitoring system. In response to this, a variety of transmission fault detection methods were applied to experimentally obtained fatigue data. Failure modes of the fatigue data include a variety of gear pitting failures, tooth wear, tooth fracture, and bearing spalling failures. Overall results indicate that, of the gear fault detection techniques, no one method can successfully detect all possible failure modes. The more successful methods need to be integrated into a single more reliable detection technique. A recently developed method, NA4, in addition to being one of the more successful gear fault detection methods, was also found to exhibit damage magnitude estimation capabilities.

Research on the Language of the English Classroom: A Disconnected Dream.

ERIC Educational Resources Information Center

Kluwin, Thomas N.

Methods used in studies of the classroom language of the English teacher are described in this paper and some results of the research are reported. The paper first describes three methods traditionally employed in the description of the language of the English classroom--live observation systems, coding systems based on transcripts, and…

Discussion of the Investigation Method on the Reaction Kinetics of Metallurgical Reaction Engineering

NASA Astrophysics Data System (ADS)

Du, Ruiling; Wu, Keng; Zhang, Jiazhi; Zhao, Yong

Reaction kinetics of metallurgical physical chemistry which was successfully applied in metallurgy (as ferrous metallurgy, non-ferrous metallurgy) became an important theoretical foundation for subject system of traditional metallurgy. Not only the research methods were very perfect, but also the independent structures and systems of it had been formed. One of the important tasks of metallurgical reaction engineering was the simulation of metallurgical process. And then, the mechanism of reaction process and the conversion time points of different control links should be obtained accurately. Therefore, the research methods and results of reaction kinetics in metallurgical physical chemistry were not very suitable for metallurgical reaction engineering. In order to provide the definite conditions of transmission, reaction kinetics parameters and the conversion time points of different control links for solving the transmission and reaction equations in metallurgical reaction engineering, a new method for researching kinetics mechanisms in metallurgical reaction engineering was proposed, which was named stepwise attempt method. Then the comparison of results between the two methods and the further development of stepwise attempt method were discussed in this paper. As a new research method for reaction kinetics in metallurgical reaction engineering, stepwise attempt method could not only satisfy the development of metallurgical reaction engineering, but also provide necessary guarantees for establishing its independent subject system.

Network Penetration Testing and Research

NASA Technical Reports Server (NTRS)

Murphy, Brandon F.

2013-01-01

This paper will focus the on research and testing done on penetrating a network for security purposes. This research will provide the IT security office new methods of attacks across and against a company's network as well as introduce them to new platforms and software that can be used to better assist with protecting against such attacks. Throughout this paper testing and research has been done on two different Linux based operating systems, for attacking and compromising a Windows based host computer. Backtrack 5 and BlackBuntu (Linux based penetration testing operating systems) are two different "attacker'' computers that will attempt to plant viruses and or NASA USRP - Internship Final Report exploits on a host Windows 7 operating system, as well as try to retrieve information from the host. On each Linux OS (Backtrack 5 and BlackBuntu) there is penetration testing software which provides the necessary tools to create exploits that can compromise a windows system as well as other operating systems. This paper will focus on two main methods of deploying exploits 1 onto a host computer in order to retrieve information from a compromised system. One method of deployment for an exploit that was tested is known as a "social engineering" exploit. This type of method requires interaction from unsuspecting user. With this user interaction, a deployed exploit may allow a malicious user to gain access to the unsuspecting user's computer as well as the network that such computer is connected to. Due to more advance security setting and antivirus protection and detection, this method is easily identified and defended against. The second method of exploit deployment is the method mainly focused upon within this paper. This method required extensive research on the best way to compromise a security enabled protected network. Once a network has been compromised, then any and all devices connected to such network has the potential to be compromised as well. With a compromised network, computers and devices can be penetrated through deployed exploits. This paper will illustrate the research done to test ability to penetrate a network without user interaction, in order to retrieve personal information from a targeted host.

Enterprise Systems Value-Based R&D Portfolio Analytics: Methods, Processes, and Tools

DTIC Science & Technology

2014-01-14

Enterprise Systems Value-Based R&D Portfolio Analytics: Methods, Processes, and Tools Final Technical Report SERC -2014-TR-041-1 January 14...by the U.S. Department of Defense through the Systems Engineering Research Center ( SERC ) under Contract H98230-08-D-0171 (Task Order 0026, RT 51... SERC is a federally funded University Affiliated Research Center managed by Stevens Institute of Technology Any opinions, findings and

The Use of Mixed Methods for Therapeutic Massage Research

PubMed Central

Porcino, Antony Joseph; Verhoef, Marja J.

2010-01-01

Mixed methods research is the integration of quantitative and qualitative components in a research project. Whether you are reading or designing a mixed methods research project, it is important to be familiar with both qualitative and quantitative research methods and the specific purposes for which they are brought together in a study: triangulation, complementarity, expansion, initiation, or development. In addition, decisions need to be made about the sequencing and the priority or importance of each qualitative and quantitative component relative to the other components, and the point or points at which the various qualitative and quantitative components will be integrated. Mixed methods research is increasingly being recognized for its ability to bring multiple points of view to a research project, taking advantage of the strengths of each of the quantitative and qualitative components to explain or resolve complex phenomena or results. This ability becomes critical when complex healing systems such as therapeutic massage are being studied. Complex healing systems may have multiple physiologic effects, often reflected in changes throughout the patient’s body. Additionally, the patient’s experience of the treatment may be an important outcome. PMID:21589698

Systemic accident analysis: examining the gap between research and practice.

PubMed

Underwood, Peter; Waterson, Patrick

2013-06-01

The systems approach is arguably the dominant concept within accident analysis research. Viewing accidents as a result of uncontrolled system interactions, it forms the theoretical basis of various systemic accident analysis (SAA) models and methods. Despite the proposed benefits of SAA, such as an improved description of accident causation, evidence within the scientific literature suggests that these techniques are not being used in practice and that a research-practice gap exists. The aim of this study was to explore the issues stemming from research and practice which could hinder the awareness, adoption and usage of SAA. To achieve this, semi-structured interviews were conducted with 42 safety experts from ten countries and a variety of industries, including rail, aviation and maritime. This study suggests that the research-practice gap should be closed and efforts to bridge the gap should focus on ensuring that systemic methods meet the needs of practitioners and improving the communication of SAA research. Copyright © 2013 Elsevier Ltd. All rights reserved.

Single-Event Effects Ground Testing and On-Orbit Rate Prediction Methods: The Past, Present and Future

NASA Technical Reports Server (NTRS)

Reed, Robert A.; Kinnison, Jim; Pickel, Jim; Buchner, Stephen; Marshall, Paul W.; Kniffin, Scott; LaBel, Kenneth A.

2003-01-01

Over the past 27 years, or so, increased concern over single event effects in spacecraft systems has resulted in research, development and engineering activities centered around a better understanding of the space radiation environment, single event effects predictive methods, ground test protocols, and test facility developments. This research has led to fairly well developed methods for assessing the impact of the space radiation environment on systems that contain SEE sensitive devices and the development of mitigation strategies either at the system or device level.

Moving from Intersection to Integration: Public Health Law Research and Public Health Systems and Services Research

PubMed Central

Burris, Scott; Mays, Glen P; Douglas Scutchfield, F; Ibrahim, Jennifer K

2012-01-01

Context For three decades, experts have been stressing the importance of law to the effective operation of public health systems. Most recently, in a 2011 report, the Institute of Medicine recommended a review of state and local public health laws to ensure appropriate authority for public health agencies; adequate access to legal counsel for public health agencies; evaluations of the health effects and costs associated with legislation, regulations, and policies; and enhancement of research methods to assess the strength of evidence regarding the health effects of public policies. These recommendations, and the continued interest in law as a determinant of health system performance, speak to the need for integrating the emerging fields of Public Health Law Research (PHLR) and Public Health Systems and Services Research (PHSSR). Methods Expert commentary. Findings This article sets out a unified framework for the two fields and a shared research agenda built around three broad inquiries: (1) the structural role of law in shaping the organization, powers, prerogatives, duties, and limitations of public health agencies and thereby their functioning and ultimately their impact on public health (“infrastructure”); (2) the mechanisms through which public health system characteristics influence the implementation of interventional public health laws (“implementation”); and (3) the individual and system characteristics that influence the ability of public health systems and their community partners to develop and secure enactment of legal initiatives to advance public health (“innovation”). Research to date has laid a foundation of evidence, but progress requires better and more accessible data, a new generation of researchers comfortable in both law and health research, and more rigorous methods. Conclusions The routine integration of law as a salient factor in broader PHSSR studies of public health system functioning and health outcomes will enhance the usefulness of research in supporting practice and the long-term improvement of system performance. PMID:22709392

A knowledgebase system to enhance scientific discovery: Telemakus

PubMed Central

Fuller, Sherrilynne S; Revere, Debra; Bugni, Paul F; Martin, George M

2004-01-01

Background With the rapid expansion of scientific research, the ability to effectively find or integrate new domain knowledge in the sciences is proving increasingly difficult. Efforts to improve and speed up scientific discovery are being explored on a number of fronts. However, much of this work is based on traditional search and retrieval approaches and the bibliographic citation presentation format remains unchanged. Methods Case study. Results The Telemakus KnowledgeBase System provides flexible new tools for creating knowledgebases to facilitate retrieval and review of scientific research reports. In formalizing the representation of the research methods and results of scientific reports, Telemakus offers a potential strategy to enhance the scientific discovery process. While other research has demonstrated that aggregating and analyzing research findings across domains augments knowledge discovery, the Telemakus system is unique in combining document surrogates with interactive concept maps of linked relationships across groups of research reports. Conclusion Based on how scientists conduct research and read the literature, the Telemakus KnowledgeBase System brings together three innovations in analyzing, displaying and summarizing research reports across a domain: (1) research report schema, a document surrogate of extracted research methods and findings presented in a consistent and structured schema format which mimics the research process itself and provides a high-level surrogate to facilitate searching and rapid review of retrieved documents; (2) research findings, used to index the documents, allowing searchers to request, for example, research studies which have studied the relationship between neoplasms and vitamin E; and (3) visual exploration interface of linked relationships for interactive querying of research findings across the knowledgebase and graphical displays of what is known as well as, through gaps in the map, what is yet to be tested. The rationale and system architecture are described and plans for the future are discussed. PMID:15507158

Research on Comprehensive Evaluation Method for Heating Project Based on Analytic Hierarchy Processing

NASA Astrophysics Data System (ADS)

Han, Shenchao; Yang, Yanchun; Liu, Yude; Zhang, Peng; Li, Siwei

2018-01-01

It is effective to reduce haze in winter by changing the distributed heat supply system. Thus, the studies on comprehensive index system and scientific evaluation method of distributed heat supply project are essential. Firstly, research the influence factors of heating modes, and an index system with multiple dimension including economic, environmental, risk and flexibility was built and all indexes were quantified. Secondly, a comprehensive evaluation method based on AHP was put forward to analyze the proposed multiple and comprehensive index system. Lastly, the case study suggested that supplying heat with electricity has great advantage and promotional value. The comprehensive index system of distributed heating supply project and evaluation method in this paper can evaluate distributed heat supply project effectively and provide scientific support for choosing the distributed heating project.

[How can the impact of Health Technology Assessment (HTA) in the Austrian healthcare system be assessed? Design of a conceptual framework].

PubMed

Schumacher, I; Zechmeister, I

2012-04-01

In Austria research in Health Technology Assessment (HTA) has been conducted since the 1990s. Research in HTA aims at supporting an adequate and efficient use of health care resources in order to sustain a publicly financed and solidary health care system. Ultimately, HTA research should result in better health of the population. Research results should provide independent information for decision makers. For legitimizing further research resources and for prioritizing future HTA research and guaranteeing the value of future research, HTA research needs itself to undergo evaluation. Aim of the study is to design a conceptual framework for evaluating the impact of HTA research in Austria on the basis of the existing literature. An already existing review which presents methods and concepts how to evaluate HTA-impact was updated by a systematic research including literature of the years 2004-January 2010. Results were analysed in regard to 4 categories: definition of the term impact, target groups and system levels, operationalisation of indicators and evaluation methods. Overall, 19 publications were included. Referring to the 4 categories, an explanation of impact has to take into account HTAs multidisciplinary setting and needs a context related definition. Target groups, system levels, indicators and methods depend on the impact defined. Studies investigated direct and indirect impact and were focused on different target groups like physicians, nurses and decision makers on the micro-, and meso level, as well as politicians and reimbursement institutions on the macro level. Except for one reference all studies applied already known and mostly qualitative methods for measuring the impact of HTA research. Thus, an appropriate pool of instruments seems to be available. There is a lack of information about validity of applied methods and indicators. By adapting adequate methods and concepts a conceptual framework for the Austrian HTA-Impact evaluation has been designed. The paper presents an overview of existing methods for the evaluation of the HTA research. This has been used to identify useful approaches for measuring the HTA-impact in Austria. By providing a context sensitive framework for impact evaluation in Austria the Austrian HTA-research contributes to the international trend of impact-evaluation. © Georg Thieme Verlag KG Stuttgart · New York.

Understanding requirements of novel healthcare information systems for management of advanced prostate cancer.

PubMed

Wagholikar, Amol S; Fung, Maggie; Nelson, Colleen C

2012-01-01

Effective management of chronic diseases is a global health priority. A healthcare information system offers opportunities to address challenges of chronic disease management. However, the requirements of health information systems are often not well understood. The accuracy of requirements has a direct impact on the successful design and implementation of a health information system. Our research describes methods used to understand the requirements of health information systems for advanced prostate cancer management. The research conducted a survey to identify heterogeneous sources of clinical records. Our research showed that the General Practitioner was the common source of patient's clinical records (41%) followed by the Urologist (14%) and other clinicians (14%). Our research describes a method to identify diverse data sources and proposes a novel patient journey browser prototype that integrates disparate data sources.

Research on knowledge representation, machine learning, and knowledge acquisition

NASA Technical Reports Server (NTRS)

Buchanan, Bruce G.

1987-01-01

Research in knowledge representation, machine learning, and knowledge acquisition performed at Knowledge Systems Lab. is summarized. The major goal of the research was to develop flexible, effective methods for representing the qualitative knowledge necessary for solving large problems that require symbolic reasoning as well as numerical computation. The research focused on integrating different representation methods to describe different kinds of knowledge more effectively than any one method can alone. In particular, emphasis was placed on representing and using spatial information about three dimensional objects and constraints on the arrangement of these objects in space. Another major theme is the development of robust machine learning programs that can be integrated with a variety of intelligent systems. To achieve this goal, learning methods were designed, implemented and experimented within several different problem solving environments.

Improved Problem Formulation in Engineering Systems Design

DTIC Science & Technology

1990-05-01

Journal model is ASME Journal of Mechanical Design. 2 1.1 Research Objective and Methods The objective of this research project was to improve...Methods and Theories, Journal of Design Methods Group, Vol. 20, No. 2, 1986, p. 410. 19 Nadler, G., Smith, J. M. and Frey, C. E., "Problem...sources do you routinely use to gather the information you need to develop a packaging system? 26 Trade journals 6 Consultants 21 Reference books 26

76 FR 38119 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

.../ Regulatory Information Number (RIN) and title, by any of the following methods: * Federal Rulemaking Portal... System Name: Human Research Protection Program (HRPP) Records (September 11, 2008, 73 FR 52838). Changes: * * * * * System Name: Delete entry and replace with ``Research Regulatory Oversight Records.'' System location...

Grid Research | Grid Modernization | NREL

Science.gov Websites

Grid Research Grid Research NREL addresses the challenges of today's electric grid through high researcher in a lab Integrated Devices and Systems Developing and evaluating grid technologies and integrated Controls Developing methods for real-time operations and controls of power systems at any scale Photo of

"Reading" Mixed Methods Research: Contexts for Criticism

ERIC Educational Resources Information Center

Freshwater, Dawn

2007-01-01

Health and social care researchers, in their haste to "belong" to academia, have adopted the system of mixed methodology research, overestimating its ability to reveal the truth and occasionally imprisoning their thought in one system. In this article, some of the assumptions underpinning mixed methodology research and its discourse are subjected…

Educational Accountability: A Qualitatively Driven Mixed-Methods Approach

ERIC Educational Resources Information Center

Hall, Jori N.; Ryan, Katherine E.

2011-01-01

This article discusses the importance of mixed-methods research, in particular the value of qualitatively driven mixed-methods research for quantitatively driven domains like educational accountability. The article demonstrates the merits of qualitative thinking by describing a mixed-methods study that focuses on a middle school's system of…

Purists need not apply: the case for pragmatism in mixed methods research.

PubMed

Florczak, Kristine L

2014-10-01

The purpose of this column is to describe several different ways of conducting mixed method research. The paradigms that underpin both qualitative and quantitative research are also considered along with a cursory review of classical pragmatism as it relates conducting mixed methods studies. Finally, the idea of loosely coupled systems as a means to support mixed methods studies is proposed along with several caveats to researchers who desire to use this new way of obtaining knowledge. © The Author(s) 2014.

Aeronautical Communications Research and Development Needs for Future Air Traffic Management Applications

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.

2002-01-01

Continuing growth in regional and global air travel has resulted in increasing traffic congestion in the air and on the ground. In spite of occasional temporary downturns due to economic recessions and catastrophic events, average growth rates of air travel have remained high since the 1960s. The resulting congestion, which constrains expansion of the air transportation industry, inflicts schedule delays and decreases overall system efficiency, creating a pressing need to develop more efficient methods of air traffic management (ATM). New ATM techniques, procedures, air space automation methods, and decision support tools are being researched and developed for deployment in time frames stretching from the next few years to the year 2020 and beyond. As these methods become more advanced and increase in complexity, the requirements for information generation, sharing and transfer among the relevant entities in the ATM system increase dramatically. However, current aeronautical communications systems will be inadequate to meet the future information transfer demands created by these advanced ATM systems. Therefore, the NASA Glenn Research Center is undertaking research programs to develop communication, methods and key technologies that can meet these future requirements. As part of this process, studies, workshops, testing and experimentation, and research and analysis have established a number of research and technology development needs. The purpose of this paper is to outline the critical research and technology needs that have been identified in these activities, and explain how these needs have been determined.

Systems of fuzzy equations in structural mechanics

NASA Astrophysics Data System (ADS)

Skalna, Iwona; Rama Rao, M. V.; Pownuk, Andrzej

2008-08-01

Systems of linear and nonlinear equations with fuzzy parameters are relevant to many practical problems arising in structure mechanics, electrical engineering, finance, economics and physics. In this paper three methods for solving such equations are discussed: method for outer interval solution of systems of linear equations depending linearly on interval parameters, fuzzy finite element method proposed by Rama Rao and sensitivity analysis method. The performance and advantages of presented methods are described with illustrative examples. Extended version of the present paper can be downloaded from the web page of the UTEP [I. Skalna, M.V. Rama Rao, A. Pownuk, Systems of fuzzy equations in structural mechanics, The University of Texas at El Paso, Department of Mathematical Sciences Research Reports Series, , Texas Research Report No. 2007-01, 2007].

A Study on Human Oriented Autonomous Distributed Manufacturing System —Real-time Scheduling Method Based on Preference of Human Operators

NASA Astrophysics Data System (ADS)

Iwamura, Koji; Kuwahara, Shinya; Tanimizu, Yoshitaka; Sugimura, Nobuhiro

Recently, new distributed architectures of manufacturing systems are proposed, aiming at realizing more flexible control structures of the manufacturing systems. Many researches have been carried out to deal with the distributed architectures for planning and control of the manufacturing systems. However, the human operators have not yet been discussed for the autonomous components of the distributed manufacturing systems. A real-time scheduling method is proposed, in this research, to select suitable combinations of the human operators, the resources and the jobs for the manufacturing processes. The proposed scheduling method consists of following three steps. In the first step, the human operators select their favorite manufacturing processes which they will carry out in the next time period, based on their preferences. In the second step, the machine tools and the jobs select suitable combinations for the next machining processes. In the third step, the automated guided vehicles and the jobs select suitable combinations for the next transportation processes. The second and third steps are carried out by using the utility value based method and the dispatching rule-based method proposed in the previous researches. Some case studies have been carried out to verify the effectiveness of the proposed method.

The revised NEUROGES-ELAN system: An objective and reliable interdisciplinary analysis tool for nonverbal behavior and gesture.

PubMed

Lausberg, Hedda; Sloetjes, Han

2016-09-01

As visual media spread to all domains of public and scientific life, nonverbal behavior is taking its place as an important form of communication alongside the written and spoken word. An objective and reliable method of analysis for hand movement behavior and gesture is therefore currently required in various scientific disciplines, including psychology, medicine, linguistics, anthropology, sociology, and computer science. However, no adequate common methodological standards have been developed thus far. Many behavioral gesture-coding systems lack objectivity and reliability, and automated methods that register specific movement parameters often fail to show validity with regard to psychological and social functions. To address these deficits, we have combined two methods, an elaborated behavioral coding system and an annotation tool for video and audio data. The NEUROGES-ELAN system is an effective and user-friendly research tool for the analysis of hand movement behavior, including gesture, self-touch, shifts, and actions. Since its first publication in 2009 in Behavior Research Methods, the tool has been used in interdisciplinary research projects to analyze a total of 467 individuals from different cultures, including subjects with mental disease and brain damage. Partly on the basis of new insights from these studies, the system has been revised methodologically and conceptually. The article presents the revised version of the system, including a detailed study of reliability. The improved reproducibility of the revised version makes NEUROGES-ELAN a suitable system for basic empirical research into the relation between hand movement behavior and gesture and cognitive, emotional, and interactive processes and for the development of automated movement behavior recognition methods.

Caitlin Murphy bio | NREL

Science.gov Websites

. energy system through quantitative analysis methods. Research Interests Evaluating the system and , Washington, DC (2014-2017) Postdoctoral Research Fellow, Carnegie Institution for Science, Washington, DC (2012-2014) Graduate Research and Teaching Assistant, California Institute of Technology, Pasadena, CA

QUARTERLY TECHNICAL PROGRESS REPORT, JULY, AUGUST, SEPTEMBER 1966.

DTIC Science & Technology

Contents: Circuit research program; Hardware systems research; Software systems research program; Numerical methods, computer arithmetic and...artificial languages; Library automation; Illiac II service , use, and program development; IBM service , use, and program development; Problem specifications; Switching theory and logical design; General laboratory information.

Passivity-based Robust Control of Aerospace Systems

NASA Technical Reports Server (NTRS)

Kelkar, Atul G.; Joshi, Suresh M. (Technical Monitor)

2000-01-01

This report provides a brief summary of the research work performed over the duration of the cooperative research agreement between NASA Langley Research Center and Kansas State University. The cooperative agreement which was originally for the duration the three years was extended by another year through no-cost extension in order to accomplish the goals of the project. The main objective of the research was to develop passivity-based robust control methodology for passive and non-passive aerospace systems. The focus of the first-year's research was limited to the investigation of passivity-based methods for the robust control of Linear Time-Invariant (LTI) single-input single-output (SISO), open-loop stable, minimum-phase non-passive systems. The second year's focus was mainly on extending the passivity-based methodology to a larger class of non-passive LTI systems which includes unstable and nonminimum phase SISO systems. For LTI non-passive systems, five different passification. methods were developed. The primary effort during the years three and four was on the development of passification methodology for MIMO systems, development of methods for checking robustness of passification, and developing synthesis techniques for passifying compensators. For passive LTI systems optimal synthesis procedure was also developed for the design of constant-gain positive real controllers. For nonlinear passive systems, numerical optimization-based technique was developed for the synthesis of constant as well as time-varying gain positive-real controllers. The passivity-based control design methodology developed during the duration of this project was demonstrated by its application to various benchmark examples. These example systems included longitudinal model of an F-18 High Alpha Research Vehicle (HARV) for pitch axis control, NASA's supersonic transport wind tunnel model, ACC benchmark model, 1-D acoustic duct model, piezo-actuated flexible link model, and NASA's Benchmark Active Controls Technology (BACT) Wing model. Some of the stability results for linear passive systems were also extended to nonlinear passive systems. Several publications and conference presentations resulted from this research.

Verifying Hybrid Systems Modeled as Timed Automata: A Case Study

DTIC Science & Technology

1997-03-01

Introduction Researchers have proposed many innovative formal methods for developing real - time systems [9]. Such methods can give system developers and...customers greater con dence that real - time systems satisfy their requirements, especially their crit- ical requirements. However, applying formal methods...specifying and reasoning about real - time systems that is designed to address these challenging problems. Our approach is to build formal reasoning tools

Expanding multi-disciplinary approaches to healthcare information technologies: what does information systems offer medical informatics?

PubMed

Chiasson, Mike; Reddy, Madhu; Kaplan, Bonnie; Davidson, Elizabeth

2007-06-01

The effective use of information technology (IT) is a crucial component for the delivery of effective services in health care. Current approaches to medical informatics (MI) research have significantly contributed to the success of IT use in health care but important challenges remain to be addressed. We believe that expanding the multi-disciplinary basis for MI research is important to meeting these research challenges. In this paper, we outline theories and methods used in information systems (IS) research that we believe can inform our understanding of health care IT applications and outcomes. To do so, we discuss some general differences in the focus and methods of MI and IS research to identify broad opportunities. We then review conceptual and methodological approaches in IS that have been applied in health care IT research. These include: technology-use mediation, collaborative work, genre theory, interpretive research, action research, and modeling. Examples of these theories and methods in healthcare IS research are illustrated.

A Complex Systems Approach to Causal Discovery in Psychiatry.

PubMed

Saxe, Glenn N; Statnikov, Alexander; Fenyo, David; Ren, Jiwen; Li, Zhiguo; Prasad, Meera; Wall, Dennis; Bergman, Nora; Briggs, Ernestine C; Aliferis, Constantin

2016-01-01

Conventional research methodologies and data analytic approaches in psychiatric research are unable to reliably infer causal relations without experimental designs, or to make inferences about the functional properties of the complex systems in which psychiatric disorders are embedded. This article describes a series of studies to validate a novel hybrid computational approach--the Complex Systems-Causal Network (CS-CN) method-designed to integrate causal discovery within a complex systems framework for psychiatric research. The CS-CN method was first applied to an existing dataset on psychopathology in 163 children hospitalized with injuries (validation study). Next, it was applied to a much larger dataset of traumatized children (replication study). Finally, the CS-CN method was applied in a controlled experiment using a 'gold standard' dataset for causal discovery and compared with other methods for accurately detecting causal variables (resimulation controlled experiment). The CS-CN method successfully detected a causal network of 111 variables and 167 bivariate relations in the initial validation study. This causal network had well-defined adaptive properties and a set of variables was found that disproportionally contributed to these properties. Modeling the removal of these variables resulted in significant loss of adaptive properties. The CS-CN method was successfully applied in the replication study and performed better than traditional statistical methods, and similarly to state-of-the-art causal discovery algorithms in the causal detection experiment. The CS-CN method was validated, replicated, and yielded both novel and previously validated findings related to risk factors and potential treatments of psychiatric disorders. The novel approach yields both fine-grain (micro) and high-level (macro) insights and thus represents a promising approach for complex systems-oriented research in psychiatry.

The Evaluation of Feasibility of Thermal Energy Storage System at Riga TPP-2

NASA Astrophysics Data System (ADS)

Ivanova, P.; Linkevics, O.; Cers, A.

2015-12-01

The installation of thermal energy storage system (TES) provides the optimisation of energy source, energy security supply, power plant operation and energy production flexibility. The aim of the present research is to evaluate the feasibility of thermal energy system installation at Riga TPP-2. The six modes were investigated: four for non-heating periods and two for heating periods. Different research methods were used: data statistic processing, data analysis, analogy, forecasting, financial method and correlation and regression method. In the end, the best mode was chosen - the increase of cogeneration unit efficiency during the summer.

It's Been Mostly about Money! A Multi-Method Research Approach to the Sources of Institutionalization

ERIC Educational Resources Information Center

Bértoa, Fernando Casal

2017-01-01

Although much has been written about the process of party system institutionalization in different regions, the reasons why some party systems institutionalize while others do not still remain a mystery. Seeking to fill this lacuna in the literature, and using a mixed-methods research approach, this article constitutes a first attempt to answer…

Formative Qualitative Evaluation for "Exploratory" ITS Research.

ERIC Educational Resources Information Center

Murray, Tom

1993-01-01

Discusses evaluation methods applicable to exploratory research areas, provides an overview of qualitative and formative methods for exploratory research on intelligent tutoring systems (ITS) and describes an exploratory study in ITS knowledge acquisition which involved working with three educators to build an ITS for high school physics.…

45 CFR 1614.3 - Range of activities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... legal research systems or other resources. (c) The specific methods to be undertaken by a recipient to... bono basis through the provision of community legal education, training, technical assistance, research..., computer-assisted legal research systems or other resources; and (2) Support provided by the recipient in...

Approaching Etuaptmumk--introducing a consensus-based mixed method for health services research.

PubMed

Chatwood, Susan; Paulette, Francois; Baker, Ross; Eriksen, Astrid; Hansen, Ketil Lenert; Eriksen, Heidi; Hiratsuka, Vanessa; Lavoie, Josée; Lou, Wendy; Mauro, Ian; Orbinski, James; Pabrum, Nathalie; Retallack, Hanna; Brown, Adalsteinn

2015-01-01

With the recognized need for health systems' improvements in the circumpolar and indigenous context, there has been a call to expand the research agenda across all sectors influencing wellness and to recognize academic and indigenous knowledge through the research process. Despite being recognized as a distinct body of knowledge in international forums and across indigenous groups, examples of methods and theories based on indigenous knowledge are not well documented in academic texts or peer-reviewed literature on health systems. This paper describes the use of a consensus-based, mixed method with indigenous knowledge by an experienced group of researchers and indigenous knowledge holders who collaborated on a study that explored indigenous values underlying health systems stewardship. The method is built on the principles of Etuaptmumk or two-eyed seeing, which aim to respond to and resolve the inherent conflicts between indigenous ways of knowing and the scientific inquiry that informs the evidence base in health care. Mixed methods' frameworks appear to provide a framing suitable for research questions that require data from indigenous knowledge sources and western knowledge. The nominal consensus method, as a western paradigm, was found to be responsive to embedding of indigenous knowledge and allowed space to express multiple perspectives and reach consensus on the question at hand. Further utilization and critical evaluation of this mixed methodology with indigenous knowledge are required.

Understanding the value of mixed methods research: the Children's Safety Initiative-Emergency Medical Services.

PubMed

Hansen, Matthew; O'Brien, Kerth; Meckler, Garth; Chang, Anna Marie; Guise, Jeanne-Marie

2016-07-01

Mixed methods research has significant potential to broaden the scope of emergency care and specifically emergency medical services investigation. Mixed methods studies involve the coordinated use of qualitative and quantitative research approaches to gain a fuller understanding of practice. By combining what is learnt from multiple methods, these approaches can help to characterise complex healthcare systems, identify the mechanisms of complex problems such as medical errors and understand aspects of human interaction such as communication, behaviour and team performance. Mixed methods approaches may be particularly useful for out-of-hospital care researchers because care is provided in complex systems where equipment, interpersonal interactions, societal norms, environment and other factors influence patient outcomes. The overall objectives of this paper are to (1) introduce the fundamental concepts and approaches of mixed methods research and (2) describe the interrelation and complementary features of the quantitative and qualitative components of mixed methods studies using specific examples from the Children's Safety Initiative-Emergency Medical Services (CSI-EMS), a large National Institutes of Health-funded research project conducted in the USA. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

48 CFR 1335.006 - Contracting methods and contract type.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 1335.006 Contracting methods and... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contracting methods and... research services under the contract might involve the use of human subjects. The provision is mandatory...

Flight Test Results of an Angle of Attack and Angle of Sideslip Calibration Method Using Output-Error Optimization

NASA Technical Reports Server (NTRS)

Siu, Marie-Michele; Martos, Borja; Foster, John V.

2013-01-01

As part of a joint partnership between the NASA Aviation Safety Program (AvSP) and the University of Tennessee Space Institute (UTSI), research on advanced air data calibration methods has been in progress. This research was initiated to expand a novel pitot-static calibration method that was developed to allow rapid in-flight calibration for the NASA Airborne Subscale Transport Aircraft Research (AirSTAR) facility. This approach uses Global Positioning System (GPS) technology coupled with modern system identification methods that rapidly computes optimal pressure error models over a range of airspeed with defined confidence bounds. Subscale flight tests demonstrated small 2-s error bounds with significant reduction in test time compared to other methods. Recent UTSI full scale flight tests have shown airspeed calibrations with the same accuracy or better as the Federal Aviation Administration (FAA) accepted GPS 'four-leg' method in a smaller test area and in less time. The current research was motivated by the desire to extend this method for inflight calibration of angle of attack (AOA) and angle of sideslip (AOS) flow vanes. An instrumented Piper Saratoga research aircraft from the UTSI was used to collect the flight test data and evaluate flight test maneuvers. Results showed that the output-error approach produces good results for flow vane calibration. In addition, maneuvers for pitot-static and flow vane calibration can be integrated to enable simultaneous and efficient testing of each system.

TEST METHODS TO CHARACTERIZE PARTICULATE MATTER EMISSIONS AND DEPOSITION RATES IN A RESEARCH HOUSE

EPA Science Inventory

The paper discusses test methods to characterize particulate matter (PM) emissions and deposition rates in a research house. In a room in the research house, specially configured for PM source testing, a high-efficiency particulate air (HEPA)-filtered air supply system, used for...

Highlights From the Third Annual Mayo Clinic Conference on Systems Engineering and Operations Research in Health Care

PubMed Central

Kamath, Janine R. A.; Osborn, John B.; Roger, Véronique L.; Rohleder, Thomas R.

2011-01-01

In August 2010, the Third Annual Mayo Clinic Conference on Systems Engineering and Operations Research in Health Care was held. The continuing mission of the conference is to gather a multidisciplinary group of systems engineers, clinicians, administrators, and academic professors to discuss the translation of systems engineering methods to more effective health care delivery. Education, research, and practice were enhanced via a mix of formal presentations, tutorials, and informal gatherings of participants with diverse backgrounds. Although the conference promotes a diversity of perspectives and methods, participants are united in their desire to find ways in which systems engineering can transform health care, especially in the context of health care reform and other significant changes affecting the delivery of health care. PMID:21803959

Hardware Specific Integration Strategy for Impedance-Based Structural Health Monitoring of Aerospace Systems

NASA Technical Reports Server (NTRS)

Owen, Robert B.; Gyekenyesi, Andrew L.; Inman, Daniel J.; Ha, Dong S.

2011-01-01

The Integrated Vehicle Health Management (IVHM) Project, sponsored by NASA's Aeronautics Research Mission Directorate, is conducting research to advance the state of highly integrated and complex flight-critical health management technologies and systems. An effective IVHM system requires Structural Health Monitoring (SHM). The impedance method is one such SHM technique for detection and monitoring complex structures for damage. This position paper on the impedance method presents the current state of the art, future directions, applications and possible flight test demonstrations.

Wind Assessment for Aerial Payload Delivery Systems Using GPS and IMU Sensors

DTIC Science & Technology

2016-09-01

post- processing of the resultant test data were the research methods used in development of this thesis . Ultimately, this thesis presents two models ...processing of the resultant test data were the research methods used in development of this thesis . Ultimately, this thesis presents two models for winds...7  E .  THESIS OBJECTIVE AND ORGANIZATION ................................. 7  II.  BLIZZARD SYSTEM COMPONENTS

Multistep Methods for Integrating the Solar System

DTIC Science & Technology

1988-07-01

Technical Report 1055 [Multistep Methods for Integrating the Solar System 0 Panayotis A. Skordos’ MIT Artificial Intelligence Laboratory DTIC S D g8...RMA ELEENT. PROECT. TASK Artific ial Inteligence Laboratory ARE1A G WORK UNIT NUMBERS 545 Technology Square Cambridge, MA 02139 IL. CONTROLLING...describes research done at the Artificial Intelligence Laboratory of the Massachusetts Institute of Technology, supported by the Advanced Research Projects

Automated accident detection at intersections.

DOT National Transportation Integrated Search

2004-03-01

This research aims to provide a timely and accurate accident detection method at intersections, which is : very important for the Traffic Management System(TMS). This research uses acoustic signals to detect : accident at intersections. A system is c...

Development Research of a Teachers' Educational Performance Support System: The Practices of Design, Development, and Evaluation

ERIC Educational Resources Information Center

Hung, Wei-Chen; Smith, Thomas J.; Harris, Marian S.; Lockard, James

2010-01-01

This study adopted design and development research methodology (Richey & Klein, "Design and development research: Methods, strategies, and issues," 2007) to systematically investigate the process of applying instructional design principles, human-computer interaction, and software engineering to a performance support system (PSS) for behavior…

Pedagogical System of Future Teachers' Professional Thinking Culture Formation

ERIC Educational Resources Information Center

Abildina, Saltanat K.; Sarsekeyeva, Zhanar Y.; Aidarbekova, Kulzhan A.; Asetova, Zhannur B.; Adanov, Kuanysbek B.

2016-01-01

Research objective is to theoretically justify and to develop a pedagogical system of development of future teachers' professional thinking culture. In the research there are used a set of theoretical methods: systematic analysis of the philosophical, psychological and pedagogical literature on the researched topic; compilation and classification…

Handbook of Research on Instructional Systems and Educational Technology

ERIC Educational Resources Information Center

Kidd, Terry, Ed.; Morris, Lonnie R., Jr., Ed.

2017-01-01

Incorporating new methods and approaches in learning environments is imperative to the development of education systems. By enhancing learning processes, education becomes more attainable at all levels. "The Handbook of Research on Instructional Systems and Educational Technology" is an essential reference source for the latest scholarly…

An investigation of the efficacy of electronic consenting interfaces of research permissions management system in a hospital setting

PubMed Central

Madathil, Kapil Chalil; Koikkara, Reshmi; Obeid, Jihad; Greenstein, Joel S.; Sanderson, Iain C.; Fryar, Katrina; Moskowitz, Jay; Gramopadhye, Anand K.

2013-01-01

Purpose Ethical and legal requirements for healthcare providers in the United States, stipulate that patients sign a consent form prior to undergoing medical treatment or participating in a research study. Currently, the majority of the hospitals obtain these consents using paper-based forms, which makes patient preference data cumbersome to store, search and retrieve. To address these issues, Health Sciences of South Carolina (HSSC), a collaborative of academic medical institutions and research universities in South Carolina, is developing an electronic consenting system, the Research Permissions Management System (RPMS). This article reports the findings of a study conducted to investigate the efficacy of the two proposed interfaces for this system – an iPad-based and touchscreen-based by comparing them to the paper-based and Topaz-based systems currently in use. Methods This study involved 50 participants: 10 hospital admission staff and 40 patients. The four systems were compared with respect to the time taken to complete the consenting process, the number of errors made by the patients, the workload experienced by the hospital staff and the subjective ratings of both patients and staff on post-test questionnaires. Results The results from the empirical study indicated no significant differences in the time taken to complete the tasks. More importantly, the participants found the new systems more usable than the conventional methods with the registration staff experiencing the least workload in the iPad and touchscreen-based conditions and the patients experiencing more privacy and control during the consenting process with the proposed electronic systems. In addition, they indicated better comprehension and awareness of what they were signing using the new interfaces. Discussion The results indicate the two methods proposed for capturing patient consents are at least as effective as the conventional methods, and superior in several important respects. While more research is needed, these findings suggest the viability of cautious adoption of electronic consenting systems, especially because these new systems appear to address the challenge of identifying the participants required for the complex research being conducted as the result of advances in the biomedical sciences. PMID:23757370

Methods and metrics challenges of delivery-system research

PubMed Central

2012-01-01

Background Many delivery-system interventions are fundamentally about change in social systems (both planned and unplanned). This systems perspective raises a number of methodological challenges for studying the effects of delivery-system change--particularly for answering questions related to whether the change will work under different conditions and how the change is integrated (or not) into the operating context of the delivery system. Methods The purpose of this paper is to describe the methodological and measurement challenges posed by five key issues in delivery-system research: (1) modeling intervention context; (2) measuring readiness for change; (3) assessing intervention fidelity and sustainability; (4) assessing complex, multicomponent interventions; and (5) incorporating time in delivery-system models to discuss recommendations for addressing these issues. For each issue, we provide recommendations for how research may be designed and implemented to overcome these challenges. Results and conclusions We suggest that a more refined understanding of the mechanisms underlying delivery-system interventions (treatment theory) and the ways in which outcomes for different classes of individuals change over time are fundamental starting points for capturing the heterogeneity in samples of individuals exposed to delivery-system interventions. To support the research recommendations outlined in this paper and to advance understanding of the "why" and "how" questions of delivery-system change and their effects, funding agencies should consider supporting studies with larger organizational sample sizes; longer duration; and nontraditional, mixed-methods designs. A version of this paper was prepared under contract with the Agency for Healthcare Research and Quality (AHRQ), US Department of Health and Human Services for presentation and discussion at a meeting on "The Challenge and Promise of Delivery System Research," held in Sterling, VA, on February 16-17, 2011. The opinions in the paper are those of the author and do not represent the views or recommendations of AHRQ or the US Department of Health and Human Services.1 PMID:22409885

The relevance of traditional knowledge systems for ethnopharmacological research: theoretical and methodological contributions

PubMed Central

2010-01-01

Background Ethnopharmacology is at the intersection of the medical, natural, and social sciences. Despite its interdisciplinary nature, most ethnopharmacological research has been based on the combination of the chemical, biological, and pharmacological sciences. Far less attention has been given to the social sciences, including anthropology and the study of traditional knowledge systems. Methods I reviewed the literature on traditional knowledge systems highlighting its potential theoretical and methodological contributions to ethnopharmacology. Results I discuss three potential theoretical contributions of traditional knowledge systems to ethnopharmacological research. First, while many plants used in indigenous pharmacopoeias have active compounds, those compounds do not always act alone in indigenous healing systems. Research highlights the holistic nature of traditional knowledge systems and helps understand plant's efficacy in its cultural context. Second, research on traditional knowledge systems can improve our understanding of how ethnopharmacological knowledge is distributed in a society, and who benefits from it. Third, research on traditional knowledge systems can enhance the study of the social relations that enable the generation, maintenance, spread, and devolution of cultural traits and innovations, including ethnopharmacological knowledge. At a methodological level, some ethnopharmacologists have used anthropological tools to understand the context of plant use and local meanings of health and disease. I discuss two more potential methodological contributions of research on traditional knowledge systems to ethnopharmacological research. First, traditional knowledge systems research has developed methods that would help ethnopharmacologists understand how people classify illnesses and remedies, a fundamental aspect of folk medicinal plant selection criteria. Second, ethnopharmacologists could also borrow methods derived from cultural consensus theory to have a broader look at intracultural variation and at the analysis of transmission and loss of traditional ethnopharmacological knowledge. Conclusions Ethical considerations in the ethnopharmacology of the 21st century should go beyond the recognition of the Intellectual Property Rights or the acquisition of research permits, to include considerations on the healthcare of the original holders of ethnopharmacological knowledge. Ethnopharmacology can do more than speed up to recover the traditional knowledge of indigenous peoples to make it available for the development of new drugs. Ethnopharmacologists can work with health care providers in the developing world for the local implementation of ethnopharmacological research results. PMID:21083913

Height Measuring System On Video Using Otsu Method

NASA Astrophysics Data System (ADS)

Sandy, C. L. M.; Meiyanti, R.

2017-01-01

A measurement of height is comparing the value of the magnitude of an object with a standard measuring tool. The problems that exist in the measurement are still the use of a simple apparatus in which one of them is by using a meter. This method requires a relatively long time. To overcome these problems, this research aims to create software with image processing that is used for the measurement of height. And subsequent that image is tested, where the object captured by the video camera can be known so that the height of the object can be measured using the learning method of Otsu. The system was built using Delphi 7 of Vision Lab VCL 4.5 component. To increase the quality of work of the system in future research, the developed system can be combined with other methods.

New approach to isometric transformations in oblique local coordinate systems of reference

NASA Astrophysics Data System (ADS)

Stępień, Grzegorz; Zalas, Ewa; Ziębka, Tomasz

2017-12-01

The research article describes a method of isometric transformation and determining an exterior orientation of a measurement instrument. The method is based on a designation of a "virtual" translation of two relative oblique orthogonal systems to a common, known in the both systems, point. The relative angle orientation of the systems does not change as each of the systems is moved along its axis. The next step is the designation of the three rotation angles (e.g. Tait-Bryan or Euler angles), transformation of the system convoluted at the calculated angles and moving the system to the initial position where the primary coordinate system was. This way eliminates movements of the systems from the calculations and makes it possible to calculate angles of mutual rotation angles of two orthogonal systems primarily involved in the movement. The research article covers laboratory calculations for simulated data. The accuracy of the results is 10-6 m (10-3 regarding the accuracy of the input data). This confi rmed the correctness of the assumed calculation method. In the following step the method was verifi ed under fi eld conditions, where the accuracy of the method raised to 0.003 m. The proposed method enabled to make the measurements with the oblique and uncentered instrument, e.g. total station instrument set over an unknown point. This is the reason why the method was named by the authors as Total Free Station - TFS. The method may be also used for isometric transformations for photogrammetric purposes.

Update on the Health Services Research Doctoral Core Competencies.

PubMed

Burgess, James F; Menachemi, Nir; Maciejewski, Matthew L

2018-03-13

To present revised core competencies for doctoral programs in health services research (HSR), modalities to deliver these competencies, and suggested methods for assessing mastery of these competencies. Core competencies were originally developed in 2005, updated (but unpublished) in 2008, modestly updated for a 2016 HSR workforce conference, and revised based on feedback from attendees. Additional feedback was obtained from doctoral program directors, employer/workforce experts and attendees of presentation on these competencies at the AcademyHealth's June 2017 Annual Research Meeting. The current version (V2.1) competencies include the ethical conduct of research, conceptual models, development of research questions, study designs, data measurement and collection methods, statistical methods for analyzing data, professional collaboration, and knowledge dissemination. These competencies represent a core that defines what HSR researchers should master in order to address the complexities of microsystem to macro-system research that HSR entails. There are opportunities to conduct formal evaluation of newer delivery modalities (e.g., flipped classrooms) and to integrate new Learning Health System Researcher Core Competencies, developed by AHRQ, into the HSR core competencies. Core competencies in HSR are a continually evolving work in progress because new research questions arise, new methods are developed, and the trans-disciplinary nature of the field leads to new multidisciplinary and team building needs. © Health Research and Educational Trust.

A literature review about usability evaluation methods for e-learning platforms.

PubMed

Freire, Luciana Lopes; Arezes, Pedro Miguel; Campos, José Creissac

2012-01-01

The usability analysis of information systems has been the target of several research studies over the past thirty years. These studies have highlighted a great diversity of points of view, including researchers from different scientific areas such as Ergonomics, Computer Science, Design and Education. Within the domain of information ergonomics, the study of tools and methods used for usability evaluation dedicated to E-learning presents evidence that there is a continuous and dynamic evolution of E-learning systems, in many different contexts -academics and corporative. These systems, also known as LMS (Learning Management Systems), can be classified according to their educational goals and their technological features. However, in these systems the usability issues are related with the relationship/interactions between user and system in the user's context. This review is a synthesis of research project about Information Ergonomics and embraces three dimensions, namely the methods, models and frameworks that have been applied to evaluate LMS. The study also includes the main usability criteria and heuristics used. The obtained results show a notorious change in the paradigms of usability, with which it will be possible to discuss about the studies carried out by different researchers that were focused on usability ergonomic principles aimed at E-learning.

Verification and intercomparison of mesoscale ensemble prediction systems in the Beijing 2008 Olympics Research and Development Project

NASA Astrophysics Data System (ADS)

Kunii, Masaru; Saito, Kazuo; Seko, Hiromu; Hara, Masahiro; Hara, Tabito; Yamaguchi, Munehiko; Gong, Jiandong; Charron, Martin; Du, Jun; Wang, Yong; Chen, Dehui

2011-05-01

During the period around the Beijing 2008 Olympic Games, the Beijing 2008 Olympics Research and Development Project (B08RDP) was conducted as part of the World Weather Research Program short-range weather forecasting research project. Mesoscale ensemble prediction (MEP) experiments were carried out by six organizations in near-real time, in order to share their experiences in the development of MEP systems. The purpose of this study is to objectively verify these experiments and to clarify the problems associated with the current MEP systems through the same experiences. Verification was performed using the MEP outputs interpolated into a common verification domain with a horizontal resolution of 15 km. For all systems, the ensemble spreads grew as the forecast time increased, and the ensemble mean improved the forecast errors compared with individual control forecasts in the verification against the analysis fields. However, each system exhibited individual characteristics according to the MEP method. Some participants used physical perturbation methods. The significance of these methods was confirmed by the verification. However, the mean error (ME) of the ensemble forecast in some systems was worse than that of the individual control forecast. This result suggests that it is necessary to pay careful attention to physical perturbations.

A Methodology for Validating Safety Heuristics Using Clinical Simulations: Identifying and Preventing Possible Technology-Induced Errors Related to Using Health Information Systems

PubMed Central

Borycki, Elizabeth; Kushniruk, Andre; Carvalho, Christopher

2013-01-01

Internationally, health information systems (HIS) safety has emerged as a significant concern for governments. Recently, research has emerged that has documented the ability of HIS to be implicated in the harm and death of patients. Researchers have attempted to develop methods that can be used to prevent or reduce technology-induced errors. Some researchers are developing methods that can be employed prior to systems release. These methods include the development of safety heuristics and clinical simulations. In this paper, we outline our methodology for developing safety heuristics specific to identifying the features or functions of a HIS user interface design that may lead to technology-induced errors. We follow this with a description of a methodological approach to validate these heuristics using clinical simulations. PMID:23606902

Gait Analysis Methods: An Overview of Wearable and Non-Wearable Systems, Highlighting Clinical Applications

PubMed Central

Muro-de-la-Herran, Alvaro; Garcia-Zapirain, Begonya; Mendez-Zorrilla, Amaia

2014-01-01

This article presents a review of the methods used in recognition and analysis of the human gait from three different approaches: image processing, floor sensors and sensors placed on the body. Progress in new technologies has led the development of a series of devices and techniques which allow for objective evaluation, making measurements more efficient and effective and providing specialists with reliable information. Firstly, an introduction of the key gait parameters and semi-subjective methods is presented. Secondly, technologies and studies on the different objective methods are reviewed. Finally, based on the latest research, the characteristics of each method are discussed. 40% of the reviewed articles published in late 2012 and 2013 were related to non-wearable systems, 37.5% presented inertial sensor-based systems, and the remaining 22.5% corresponded to other wearable systems. An increasing number of research works demonstrate that various parameters such as precision, conformability, usability or transportability have indicated that the portable systems based on body sensors are promising methods for gait analysis. PMID:24556672

[Discussion on appraisal methods and key technologies of arbuscular mycorrhizal fungi and medicinal plant symbiosis system].

PubMed

Chen, Meilan; Guo, Lanping; Yang, Guang; Chen, Min; Yang, Li; Huang, Luqi

2011-11-01

Applications of arbuscular mycorrhizal fungi in research of medicinal plant cultivation are increased in recent years. Medicinal plants habitat is complicated and many inclusions are in root, however crop habitat is simple and few inclusions in root. So appraisal methods and key technologies about the symbiotic system of crop and arbuscular mycorrhizal fungi can't completely suitable for the symbiotic system of medicinal plants and arbuscular mycorrhizal fungi. This article discuss the appraisal methods and key technologies about the symbiotic system of medicinal plant and arbuscular mycorrhizal fungi from the isolation and identification of arbuscular mycorrhiza, and the appraisal of colonization intensity. This article provides guidance for application research of arbuscular mycorrhizal fungi in cultivation of medicinal plants.

Static Methods in the Design of Nonlinear Automatic Control Systems,

DTIC Science & Technology

1984-06-27

227 Chapter VI. Ways of Decrease of the Number of Statistical Nodes During the Research of Nonlinear Systems...at present occupies the central place. This region of research was called the statistical dynamics of nonlinear H automatic control systems...receives further development in the numerous research of Soviet and C foreign scientists. Special role in the development of the statistical dynamics of

Using Research-Based Instruction to Improve Math Outcomes with Underprepared Students

ERIC Educational Resources Information Center

Pearce, Lee R.; Pearce, Kristi L.; Siewert, Daluss J.

2017-01-01

The authors used a mixed-methods research design to evaluate a multi-tiered system of supports model to address the disturbing failure rates of underprepared college students placed in developmental mathematics at a small state university. While qualitative data gathered from using Participatory Action Research methods directed the two-year…

Prototype of a computer method for designing and analyzing heating, ventilating and air conditioning proportional, electronic control systems

NASA Astrophysics Data System (ADS)

Barlow, Steven J.

1986-09-01

The Air Force needs a better method of designing new and retrofit heating, ventilating and air conditioning (HVAC) control systems. Air Force engineers currently use manual design/predict/verify procedures taught at the Air Force Institute of Technology, School of Civil Engineering, HVAC Control Systems course. These existing manual procedures are iterative and time-consuming. The objectives of this research were to: (1) Locate and, if necessary, modify an existing computer-based method for designing and analyzing HVAC control systems that is compatible with the HVAC Control Systems manual procedures, or (2) Develop a new computer-based method of designing and analyzing HVAC control systems that is compatible with the existing manual procedures. Five existing computer packages were investigated in accordance with the first objective: MODSIM (for modular simulation), HVACSIM (for HVAC simulation), TRNSYS (for transient system simulation), BLAST (for building load and system thermodynamics) and Elite Building Energy Analysis Program. None were found to be compatible or adaptable to the existing manual procedures, and consequently, a prototype of a new computer method was developed in accordance with the second research objective.

CB4-03: An Eye on the Future: A Review of Data Virtualization Techniques to Improve Research Analytics

PubMed Central

Richter, Jack; McFarland, Lela; Bredfeldt, Christine

2012-01-01

Background/Aims Integrating data across systems can be a daunting process. The traditional method of moving data to a common location, mapping fields with different formats and meanings, and performing data cleaning activities to ensure valid and reliable integration across systems can be both expensive and extremely time consuming. As the scope of needed research data increases, the traditional methodology may not be sustainable. Data Virtualization provides an alternative to traditional methods that may reduce the effort required to integrate data across disparate systems. Objective Our goal was to survey new methods in data integration, cloud computing, enterprise data management and virtual data management for opportunities to increase the efficiency of producing VDW and similar data sets. Methods Kaiser Permanente Information Technology (KPIT), in collaboration with the Mid-Atlantic Permanente Research Institute (MAPRI) reviewed methodologies in the burgeoning field of Data Virtualization. We identified potential strengths and weaknesses of new approaches to data integration. For each method, we evaluated its potential application for producing effective research data sets. Results Data Virtualization provides opportunities to reduce the amount of data movement required to integrate data sources on different platforms in order to produce research data sets. Additionally, Data Virtualization also includes methods for managing “fuzzy” matching used to match fields known to have poor reliability such as names, addresses and social security numbers. These methods could improve the efficiency of integrating state and federal data such as patient race, death, and tumors with internal electronic health record data. Discussion The emerging field of Data Virtualization has considerable potential for increasing the efficiency of producing research data sets. An important next step will be to develop a proof of concept project that will help us understand to benefits and drawbacks of these techniques.

Application Research of Fault Tree Analysis in Grid Communication System Corrective Maintenance

NASA Astrophysics Data System (ADS)

Wang, Jian; Yang, Zhenwei; Kang, Mei

2018-01-01

This paper attempts to apply the fault tree analysis method to the corrective maintenance field of grid communication system. Through the establishment of the fault tree model of typical system and the engineering experience, the fault tree analysis theory is used to analyze the fault tree model, which contains the field of structural function, probability importance and so on. The results show that the fault tree analysis can realize fast positioning and well repairing of the system. Meanwhile, it finds that the analysis method of fault tree has some guiding significance to the reliability researching and upgrading f the system.

48 CFR 917.7301-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 917.7301-1 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Program Research and Development Announcements 917.7301-1... in entering into arrangements for research, development, and related projects in specified areas of...

Embryological Research.

ERIC Educational Resources Information Center

Oppenheimer, Steven B.

1989-01-01

To integrate a research/discovery component into one course, an experiment using the sea urchin embryo system is introduced because the teacher manages only one organism and students provide the variables. The materials, handling methods, and experimental methods of the experiment are described. (YP)

The Socialization of Virtual Teams: Implications for ISD

NASA Astrophysics Data System (ADS)

Mullally, Brenda; Stapleton, Larry

Studies show that Information Systems Development (ISD) projects do not fulfil stakeholder expectations of completion time, quality and budget. (2005) study shows that development is more about social interaction and mutual understanding than following a prescribed method. Systems development is a social process where interactions help to make sense of the reality within which the system is developed (Hirschheirn et al., 1991). Research concentrates on methodology when in fact method may not be the primary problem. Authors have called for further research to investigate the true nature of the current systems development environment in real organisational situations (Fitzgerald, 2000).

Facial expression system on video using widrow hoff

NASA Astrophysics Data System (ADS)

Jannah, M.; Zarlis, M.; Mawengkang, H.

2018-03-01

Facial expressions recognition is one of interesting research. This research contains human feeling to computer application Such as the interaction between human and computer, data compression, facial animation and facial detection from the video. The purpose of this research is to create facial expression system that captures image from the video camera. The system in this research uses Widrow-Hoff learning method in training and testing image with Adaptive Linear Neuron (ADALINE) approach. The system performance is evaluated by two parameters, detection rate and false positive rate. The system accuracy depends on good technique and face position that trained and tested.

A Proposal to Perform New Theoretical and Experimental Research on HumanEfficiency Through Developments Within Systems Factorial Technology (SFT)

DTIC Science & Technology

2017-05-26

Mathematical psychology. In APA Handbook of Research Methods in Psychology, Vol. 2: Research Designs: Quantitative , Qualitative, DISTRIBUTION A: Distribution...AFRL-AFOSR-VA-TR-2017-0108 A Proposal to Perform New Theoretical and Experimental Research on Human Efficiency Through Developments Within Systems...release. AF Office Of Scientific Research (AFOSR)/ RTA2 Arlington, Virginia 22203 Air Force Research Laboratory Air Force Materiel Command a. REPORT

Application of Complex Adaptive Systems in Portfolio Management

ERIC Educational Resources Information Center

Su, Zheyuan

2017-01-01

Simulation-based methods are becoming a promising research tool in financial markets. A general Complex Adaptive System can be tailored to different application scenarios. Based on the current research, we built two models that would benefit portfolio management by utilizing Complex Adaptive Systems (CAS) in Agent-based Modeling (ABM) approach.…

Passive vs. active safety belt systems in Volkswagen rabbits : a comparison of owner use habits and attitudes

DOT National Transportation Integrated Search

1976-08-01

The overall objective of this research is to measure usage of, and attitudes toward, the passive restraint system, compared with the active restraint system on 1975 model year Volkswagen Rabbits. Methods used to carry out the research include: Interv...

Educational Research and Theory Perspectives on Intelligent Computer-Assisted Instruction.

ERIC Educational Resources Information Center

Tennyson, Robert D.; Christensen, Dean L.

This paper defines the next generation of intelligent computer-assisted instructional systems (ICAI) by depicting the elaborations and extensions offered by educational research and theory perspectives to enhance the ICAI environment. The first section describes conventional ICAI systems, which use expert systems methods and have three modules: a…

Applications of geographic information systems (GIS) data and methods in obesity-related research.

PubMed

Jia, P; Cheng, X; Xue, H; Wang, Y

2017-04-01

Geographic information systems (GIS) data/methods offer good promise for public health programs including obesity-related research. This study systematically examined their applications and identified gaps and limitations in current obesity-related research. A systematic search of PubMed for studies published before 20 May 2016, utilizing synonyms for GIS in combination with synonyms for obesity as search terms, identified 121 studies that met our inclusion criteria. We found primary applications of GIS data/methods in obesity-related research included (i) visualization of spatial distribution of obesity and obesity-related phenomena, and basic obesogenic environmental features, and (ii) construction of advanced obesogenic environmental indicators. We found high spatial heterogeneity in obesity prevalence/risk and obesogenic environmental factors. Also, study design and characteristics varied considerably across studies because of lack of established guidance and protocols in the field, which may also have contributed to the mixed findings about environmental impacts on obesity. Existing findings regarding built environment are more robust than those regarding food environment. Applications of GIS data/methods in obesity research are still limited, and related research faces many challenges. More and better GIS data and more friendly analysis methods are needed to expand future GIS applications in obesity-related research. © 2017 World Obesity Federation.

Fitting methods to paradigms: are ergonomics methods fit for systems thinking?

PubMed

Salmon, Paul M; Walker, Guy H; M Read, Gemma J; Goode, Natassia; Stanton, Neville A

2017-02-01

The issues being tackled within ergonomics problem spaces are shifting. Although existing paradigms appear relevant for modern day systems, it is worth questioning whether our methods are. This paper asks whether the complexities of systems thinking, a currently ubiquitous ergonomics paradigm, are outpacing the capabilities of our methodological toolkit. This is achieved through examining the contemporary ergonomics problem space and the extent to which ergonomics methods can meet the challenges posed. Specifically, five key areas within the ergonomics paradigm of systems thinking are focused on: normal performance as a cause of accidents, accident prediction, system migration, systems concepts and ergonomics in design. The methods available for pursuing each line of inquiry are discussed, along with their ability to respond to key requirements. In doing so, a series of new methodological requirements and capabilities are identified. It is argued that further methodological development is required to provide researchers and practitioners with appropriate tools to explore both contemporary and future problems. Practitioner Summary: Ergonomics methods are the cornerstone of our discipline. This paper examines whether our current methodological toolkit is fit for purpose given the changing nature of ergonomics problems. The findings provide key research and practice requirements for methodological development.

Application and preventive maintenance of neurology medical equipment in isfahan alzahra hospital.

PubMed

Alikhani, Parivash; Vesal, Sahar; Kashefi, Parviz; Pour, Ramin Etamadi; Khorvash, Fariborz; Askari, Gholamreza; Meamar, Rokhsareh

2013-05-01

Nowadays Medical equipment plays an important role in the treatment and in the medical education. Using outdated preventive maintenance (PM) system may cause problems in the cutting edge medical equipment, Nervous system disease's equipment (In diagnosis and treatment) which are crucial for every medical center. Based on above facts we focused on nervous system treat units' equipment and informed the supervisors and their colleagues about the latest equipment maintenance status and promoted methodical and correct method to be used for medical equipment maintenance. This research is an analytical descriptive and has been done on the base information from a particular time to past. We gathered our required information of 2009 from Alzahra Medical Center. We divided this research info 2 main phases. In the first phase, we picked out Neurosurgery and Neourology diseases medical equipment (diagnosis and therapy equipment) and in the second phase, we need to implement a methodical PM for every equipment. Research has shown that there are 19nervous system equipment in Alzahra Medical center, categorized in diagnostic (13 pcs), therapeutic (4 pcs) and diagnostic-therapeutic (2 pcs). As we declare in methods part of this research, we categorized medical equipment in Food and Drug Administration (FDA) segmentation. Capital-scarce equipment: Magnetic resonance imaging, Eco Doppler, Kamalaarak ultrasonic surgical aspirator, Stereotactic, computed tomography-scan, euroendoscope/vital-scarce equipment: Coblation, Sonoco, vaterjet/scarce equipment: Transcranial color Doppler, electroencephalogram, electromyography, surgical microscope. Survey of application and preventive maintenance of neurology medical equipment in Isfahan Alzahra hospital show there is no P.M system. Implementing a complete P.M system for this medical center is crucial to preventing cause problems for these medical equipment and decreasing maintenance costs and gaining uptime. Researchers of this article have tried to provide PM, use of texts, web and experts.

Criteria for quantitative and qualitative data integration: mixed-methods research methodology.

PubMed

Lee, Seonah; Smith, Carrol A M

2012-05-01

Many studies have emphasized the need and importance of a mixed-methods approach for evaluation of clinical information systems. However, those studies had no criteria to guide integration of multiple data sets. Integrating different data sets serves to actualize the paradigm that a mixed-methods approach argues; thus, we require criteria that provide the right direction to integrate quantitative and qualitative data. The first author used a set of criteria organized from a literature search for integration of multiple data sets from mixed-methods research. The purpose of this article was to reorganize the identified criteria. Through critical appraisal of the reasons for designing mixed-methods research, three criteria resulted: validation, complementarity, and discrepancy. In applying the criteria to empirical data of a previous mixed methods study, integration of quantitative and qualitative data was achieved in a systematic manner. It helped us obtain a better organized understanding of the results. The criteria of this article offer the potential to produce insightful analyses of mixed-methods evaluations of health information systems.

Sensor Failure Detection of FASSIP System using Principal Component Analysis

NASA Astrophysics Data System (ADS)

Sudarno; Juarsa, Mulya; Santosa, Kussigit; Deswandri; Sunaryo, Geni Rina

2018-02-01

In the nuclear reactor accident of Fukushima Daiichi in Japan, the damages of core and pressure vessel were caused by the failure of its active cooling system (diesel generator was inundated by tsunami). Thus researches on passive cooling system for Nuclear Power Plant are performed to improve the safety aspects of nuclear reactors. The FASSIP system (Passive System Simulation Facility) is an installation used to study the characteristics of passive cooling systems at nuclear power plants. The accuracy of sensor measurement of FASSIP system is essential, because as the basis for determining the characteristics of a passive cooling system. In this research, a sensor failure detection method for FASSIP system is developed, so the indication of sensor failures can be detected early. The method used is Principal Component Analysis (PCA) to reduce the dimension of the sensor, with the Squarred Prediction Error (SPE) and statistic Hotteling criteria for detecting sensor failure indication. The results shows that PCA method is capable to detect the occurrence of a failure at any sensor.

The CELSS research program - A brief review of recent activities

NASA Technical Reports Server (NTRS)

Macelroy, R. D.; Tremor, J.; Bubenheim, D. L.; Gale, J.

1989-01-01

The history of the Controlled Ecological Life Support System program, initiated by NASA in the late 1970s to explore the use of bioregenerative methods of life support, is reviewed. The project focused on examining the process involved in converting inorganic minerals and gases into life support materials using sunlight as the primary energy source. The research, planning, and technological development required by the CELSS program and conducted at NASA field centers, at various universities, and by commercial organizations are reviewed. Research activities at universities have focused upon exploring methods of reducing the size of the system, reducing system power requirements, understanding issues that are associated with its long-term stability, and identifying new technologies that might be useful in improving its efficiency. Research activities at Ames research center have focused on the use of common duckweed as a high biomass-producing plant, which is high in protein and on waste processing.

A New PC and LabVIEW Package Based System for Electrochemical Investigations

PubMed Central

Stević, Zoran; Andjelković, Zoran; Antić, Dejan

2008-01-01

The paper describes a new PC and LabVIEW software package based system for electrochemical research. An overview of well known electrochemical methods, such as potential measurements, galvanostatic and potentiostatic method, cyclic voltammetry and EIS is given. Electrochemical impedance spectroscopy has been adapted for systems containing large capacitances. For signal generation and recording of the response of investigated electrochemical cell, a measurement and control system was developed, based on a PC P4. The rest of the hardware consists of a commercially available AD-DA converter and an external interface for analog signal processing. The interface is a result of authors own research. The software platform for desired measurement methods is LabVIEW 8.2 package, which is regarded as a high standard in the area of modern virtual instruments. The developed system was adjusted, tested and compared with commercially available system and ORCAD simulation. PMID:27879794

ProcessGene-Connect: SOA Integration between Business Process Models and Enactment Transactions of Enterprise Software Systems

NASA Astrophysics Data System (ADS)

Wasser, Avi; Lincoln, Maya

In recent years, both practitioners and applied researchers have become increasingly interested in methods for integrating business process models and enterprise software systems through the deployment of enabling middleware. Integrative BPM research has been mainly focusing on the conversion of workflow notations into enacted application procedures, and less effort has been invested in enhancing the connectivity between design level, non-workflow business process models and related enactment systems such as: ERP, SCM and CRM. This type of integration is useful at several stages of an IT system lifecycle, from design and implementation through change management, upgrades and rollout. The paper presents an integration method that utilizes SOA for connecting business process models with corresponding enterprise software systems. The method is then demonstrated through an Oracle E-Business Suite procurement process and its ERP transactions.

Reimagining Human Research Protections for 21st Century Science

PubMed Central

Bietz, Matthew; Bae, Deborah; Bigby, Barbara; Devereaux, Mary; Fowler, James; Waldo, Ann; Weibel, Nadir; Patrick, Kevin; Klemmer, Scott; Melichar, Lori

2016-01-01

Background Evolving research practices and new forms of research enabled by technological advances require a redesigned research oversight system that respects and protects human research participants. Objective Our objective was to generate creative ideas for redesigning our current human research oversight system. Methods A total of 11 researchers and institutional review board (IRB) professionals participated in a January 2015 design thinking workshop to develop ideas for redesigning the IRB system. Results Ideas in 5 major domains were generated. The areas of focus were (1) improving the consent form and process, (2) empowering researchers to protect their participants, (3) creating a system to learn from mistakes, (4) improving IRB efficiency, and (5) facilitating review of research that leverages technological advances. Conclusions We describe the impetus for and results of a design thinking workshop to reimagine a human research protections system that is responsive to 21st century science. PMID:28007687

BCI2000: a general-purpose brain-computer interface (BCI) system.

PubMed

Schalk, Gerwin; McFarland, Dennis J; Hinterberger, Thilo; Birbaumer, Niels; Wolpaw, Jonathan R

2004-06-01

Many laboratories have begun to develop brain-computer interface (BCI) systems that provide communication and control capabilities to people with severe motor disabilities. Further progress and realization of practical applications depends on systematic evaluations and comparisons of different brain signals, recording methods, processing algorithms, output formats, and operating protocols. However, the typical BCI system is designed specifically for one particular BCI method and is, therefore, not suited to the systematic studies that are essential for continued progress. In response to this problem, we have developed a documented general-purpose BCI research and development platform called BCI2000. BCI2000 can incorporate alone or in combination any brain signals, signal processing methods, output devices, and operating protocols. This report is intended to describe to investigators, biomedical engineers, and computer scientists the concepts that the BC12000 system is based upon and gives examples of successful BCI implementations using this system. To date, we have used BCI2000 to create BCI systems for a variety of brain signals, processing methods, and applications. The data show that these systems function well in online operation and that BCI2000 satisfies the stringent real-time requirements of BCI systems. By substantially reducing labor and cost, BCI2000 facilitates the implementation of different BCI systems and other psychophysiological experiments. It is available with full documentation and free of charge for research or educational purposes and is currently being used in a variety of studies by many research groups.

Development of Methodologies for IV and V of Neural Networks

NASA Technical Reports Server (NTRS)

Taylor, Brian; Darrah, Marjorie

2003-01-01

Non-deterministic systems often rely upon neural network (NN) technology to "lean" to manage flight systems under controlled conditions using carefully chosen training sets. How can these adaptive systems be certified to ensure that they will become increasingly efficient and behave appropriately in real-time situations? The bulk of Independent Verification and Validation (IV&V) research of non-deterministic software control systems such as Adaptive Flight Controllers (AFC's) addresses NNs in well-behaved and constrained environments such as simulations and strict process control. However, neither substantive research, nor effective IV&V techniques have been found to address AFC's learning in real-time and adapting to live flight conditions. Adaptive flight control systems offer good extensibility into commercial aviation as well as military aviation and transportation. Consequently, this area of IV&V represents an area of growing interest and urgency. ISR proposes to further the current body of knowledge to meet two objectives: Research the current IV&V methods and assess where these methods may be applied toward a methodology for the V&V of Neural Network; and identify effective methods for IV&V of NNs that learn in real-time, including developing a prototype test bed for IV&V of AFC's. Currently. no practical method exists. lSR will meet these objectives through the tasks identified and described below. First, ISR will conduct a literature review of current IV&V technology. TO do this, ISR will collect the existing body of research on IV&V of non-deterministic systems and neural network. ISR will also develop the framework for disseminating this information through specialized training. This effort will focus on developing NASA's capability to conduct IV&V of neural network systems and to provide training to meet the increasing need for IV&V expertise in such systems.

Improved memory loading techniques for the TSRV display system

NASA Technical Reports Server (NTRS)

Easley, W. C.; Lynn, W. A.; Mcluer, D. G.

1986-01-01

A recent upgrade of the TSRV research flight system at NASA Langley Research Center retained the original monochrome display system. However, the display memory loading equipment was replaced requiring design and development of new methods of performing this task. This paper describes the new techniques developed to load memory in the display system. An outdated paper tape method for loading the BOOTSTRAP control program was replaced by EPROM storage of the characters contained on the tape. Rather than move a tape past an optical reader, a counter was implemented which steps sequentially through EPROM addresses and presents the same data to the loader circuitry. A cumbersome cassette tape method for loading the applications software was replaced with a floppy disk method using a microprocessor terminal installed as part of the upgrade. The cassette memory image was transferred to disk and a specific software loader was written for the terminal which duplicates the function of the cassette loader.

Non-classical method of modelling of vibrating mechatronic systems

NASA Astrophysics Data System (ADS)

Białas, K.; Buchacz, A.

2016-08-01

This work presents non-classical method of modelling of mechatronic systems by using polar graphs. The use of such a method enables the analysis and synthesis of mechatronic systems irrespective of the type and number of the elements of such a system. The method id connected with algebra of structural numbers. The purpose of this paper is also introduces synthesis of mechatronic system which is the reverse task of dynamics. The result of synthesis is obtaining system meeting the defined requirements. This approach is understood as design of mechatronic systems. The synthesis may also be applied to modify the already existing systems in order to achieve a desired result. The system was consisted from mechanical and electrical elements. Electrical elements were used as subsystem reducing unwanted vibration of mechanical system. The majority of vibration occurring in devices and machines is harmful and has a disadvantageous effect on their condition. Harmful impact of vibration is caused by the occurrence of increased stresses and the loss of energy, which results in faster wear machinery. Vibration, particularly low-frequency vibration, also has a negative influence on the human organism. For this reason many scientists in various research centres conduct research aimed at the reduction or total elimination of vibration.

Aerial Remote Radio Frequency Identification System for Small Vessel Monitoring

DTIC Science & Technology

2009-12-01

Assessment Methods , Ocean Studies Board, Commission on Geosciences, Environment, and Resources, National Research Council. (1998). Improving fish stock... Research Council (NRC). (2006). Review of recreational fisheries survey methods . Washington, DC: The National Academies Press. NOAA Fisheries. (1996...MONITORING AGENCY NAME(S) AND ADDRESS(ES) Acquisition Research Program 10. SPONSORING/MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The

Optimal control for wind turbine system via state-space method

NASA Astrophysics Data System (ADS)

Shanoob, Mudhafar L.

Renewable energy is becoming a fascinating research interest in future energy production because it is green and does not pollute nature. Wind energy is an excellent example of renewable resources that are evolving. Throughout the history of humanity, wind energy has been used. In ancient time, it was used to grind seeds, sailing etc. Nowadays, wind energy has been used to generate electrical power. Researchers have done a lot of research about using a wind source to generate electricity. As wind flow is not reliable, there is a challenge to get stable electricity out of this varying wind. This problem leads to the use of different control methods and the optimization of these methods to get a stable and reliable electrical energy. In this research, a wind turbine system is considered to study the transient and the steady-state stability; consisting of the aerodynamic system, drive train and generator. The Doubly Feed Induction Generator (DFIG) type generator is used in this thesis. The wind turbine system is connected to power system network. The grid is an infinite bus bar connected to a short transmission line and transformer. The generator is attached to the grid from the stator side. State-space method is used to model the wind turbine parts. The system is modeled and controlled using MATLAB/Simulation software. First, the current-mode control method (PVdq) with (PI) regulator is operated as a reference to find how the system reacts to an unexpected disturbance on the grid side or turbine side. The controller is operated with three scenarios of disruption: Disturbance-mechanical torque input, Step disturbance in the electrical torque reference and Fault Ride-through. In the simulation results, the time response and the transient stability of the system is a product of the disturbances that take a long time to settle. So, for this reason, Linear Quadratic Regulation (LQR) optimal control is utilized to solve this problem. The LQR method is designed based on using type 1 servo system that depends on the full state feedback variables and tracking error. The LQR improves the transient stability and time response of the wind turbine system in all three-disturbance scenarios. The results of both methods are deeply explained in the simulation section.

Developing system for delivery of optical radiation in medicobiological researches

NASA Astrophysics Data System (ADS)

Loschenov, Victor B.; Taraz, Majid

2004-06-01

Methods of optical diagnostics and methods of photodynamic therapy are actively used in medico-biological researches. The system for delivery of optical radiation is one of the key methods in these researches. Usually these systems use flexible optical fibers with diameters from 200 to 1000 micron. Two types of systems for delivery are subdivided, first for diagnostic researches, second for therapeutic procedures. Existing diagnostic catheters, which have most widely applied in medicine, have bifurcated with diameter of the tip equal 1.8 mm. These devices, which are called fiber-optical catheters, satisfy the majority endoscopes researches. However, till now the problem of optical-diagnostics inside tissue is not soled. Especially it is important at diagnostics of a mammary gland, livers, thyroid glands tumor, tumor of a brain and some other studies connected with punctures. In these cases, it is necessary that diameter of fiber-optical catheters be less than one millimeter. This work is devoted to the development of these catheters. Also in clinical procedures such as photodynamic therapy (PDT) and interstitial laser photocoagulation (ILP), cylindrical light diffusing tips are rapidly becoming a popular device for the administration of the desired light dose for the illumination of hollow organs, such as bronchus, trachea and oesophagus. This work is devoted to the development of these catheters.

Research of Litchi Diseases Diagnosis Expertsystem Based on Rbr and Cbr

NASA Astrophysics Data System (ADS)

Xu, Bing; Liu, Liqun

To conquer the bottleneck problems existing in the traditional rule-based reasoning diseases diagnosis system, such as low reasoning efficiency and lack of flexibility, etc.. It researched the integrated case-based reasoning (CBR) and rule-based reasoning (RBR) technology, and put forward a litchi diseases diagnosis expert system (LDDES) with integrated reasoning method. The method use data mining and knowledge obtaining technology to establish knowledge base and case library. It adopt rules to instruct the retrieval and matching for CBR, and use association rule and decision trees algorithm to calculate case similarity.The experiment shows that the method can increase the system's flexibility and reasoning ability, and improve the accuracy of litchi diseases diagnosis.

Generalized Birkhoffian representation of nonholonomic systems and its discrete variational algorithm

NASA Astrophysics Data System (ADS)

Liu, Shixing; Liu, Chang; Hua, Wei; Guo, Yongxin

2016-11-01

By using the discrete variational method, we study the numerical method of the general nonholonomic system in the generalized Birkhoffian framework, and construct a numerical method of generalized Birkhoffian equations called a self-adjoint-preserving algorithm. Numerical results show that it is reasonable to study the nonholonomic system by the structure-preserving algorithm in the generalized Birkhoffian framework. Project supported by the National Natural Science Foundation of China (Grant Nos. 11472124, 11572145, 11202090, and 11301350), the Doctor Research Start-up Fund of Liaoning Province, China (Grant No. 20141050), the China Postdoctoral Science Foundation (Grant No. 2014M560203), and the General Science and Technology Research Plans of Liaoning Educational Bureau, China (Grant No. L2013005).

Lipophilic Super-Absorbent Swelling Gels as Cleaners for Use on Weapons Systems and Platforms

DTIC Science & Technology

2011-08-18

polymer gel systems. Further research will address the post-cleaning gel removal method, the use of non- fluorinated compounds in gel synthesis, and...be proposed to address other issues including the method for removing the gels after swelling, the use of non- fluorinated compounds in gel...strength. Elimination of fluorinated compounds in the gel synthesis was the focus of this and subsequent phases of this research. TECHNICAL APPROACH

Quality of Expert Systems: Methods and Techniques (Kwaliteit van Expertsystemen: Methoden en Technieken)

DTIC Science & Technology

1989-12-01

en Elektroniscb Laboratorium TNO (FEL-TNO), de Rijksuniversiteit Limburg (RL) en bet Research Instituut voor Kennis-Systemen (RIKS). In dit rapport...kwaliteitsbeheersing van kennissystemen. TNO rapport Pagina 2 report no : FEL-89-A267 bee Quality of Expert Systems: Methods and Techniques author(s) J.H.J. Lenting MA...Defence Research and Development. Participants in the project are TNO Physics and Electronics Laboratory (FEL-TNO), University of Limburg (RL) and

Research on simulation based material delivery system for an automobile company with multi logistics center

NASA Astrophysics Data System (ADS)

Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

2017-06-01

Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

Longitudinal Analysis of New Information Types in Clinical Notes

PubMed Central

Zhang, Rui; Pakhomov, Serguei; Melton, Genevieve B.

2014-01-01

It is increasingly recognized that redundant information in clinical notes within electronic health record (EHR) systems is ubiquitous, significant, and may negatively impact the secondary use of these notes for research and patient care. We investigated several automated methods to identify redundant versus relevant new information in clinical reports. These methods may provide a valuable approach to extract clinically pertinent information and further improve the accuracy of clinical information extraction systems. In this study, we used UMLS semantic types to extract several types of new information, including problems, medications, and laboratory information. Automatically identified new information highly correlated with manual reference standard annotations. Methods to identify different types of new information can potentially help to build up more robust information extraction systems for clinical researchers as well as aid clinicians and researchers in navigating clinical notes more effectively and quickly identify information pertaining to changes in health states. PMID:25717418

A Multigroup Method for the Calculation of Neutron Fluence with a Source Term

NASA Technical Reports Server (NTRS)

Heinbockel, J. H.; Clowdsley, M. S.

1998-01-01

Current research on the Grant involves the development of a multigroup method for the calculation of low energy evaporation neutron fluences associated with the Boltzmann equation. This research will enable one to predict radiation exposure under a variety of circumstances. Knowledge of radiation exposure in a free-space environment is a necessity for space travel, high altitude space planes and satellite design. This is because certain radiation environments can cause damage to biological and electronic systems involving both short term and long term effects. By having apriori knowledge of the environment one can use prediction techniques to estimate radiation damage to such systems. Appropriate shielding can be designed to protect both humans and electronic systems that are exposed to a known radiation environment. This is the goal of the current research efforts involving the multi-group method and the Green's function approach.

A compact LWIR imaging spectrometer with a variable gap Fabry-Perot interferometer

NASA Astrophysics Data System (ADS)

Zhang, Fang; Gao, Jiaobo; Wang, Nan; Zhao, Yujie; Zhang, Lei; Gao, Shan

2017-02-01

Fourier transform spectroscopy is a widely employed method for obtaining spectra, with applications ranging from the desktop to remote sensing. The long wave infrared (LWIR) interferometric spectral imaging system is always with huge volume and large weight. In order to miniaturize and light the instrument, a new method of LWIR spectral imaging system based on a variable gap Fabry-Perot (FP) interferometer is researched. With the system working principle analyzed, theoretically, it is researched that how to make certain the primary parameter, such as, the reflectivity of the two interferometric cavity surfaces, field of view (FOV) and f-number of the imaging lens. A prototype is developed and a good experimental result of CO2 laser is obtained. The research shows that besides high throughput and high spectral resolution, the advantage of miniaturization is also simultaneously achieved in this method.

Event Detection Challenges, Methods, and Applications in Natural and Artificial Systems

DTIC Science & Technology

2009-03-01

using the composite event detection method [Kerman, Jiang, Blumberg , and Buttrey, 2009]. Although the techniques and utility of the...aforementioned method have been clearly demonstrated, there is still much work and research to be conducted within the realm of event detection. This...detection methods . The paragraphs that follow summarize the discoveries of and lessons learned by multiple researchers and authors over many

48 CFR 316.505 - Ordering.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Ordering. 316.505 Section 316.505 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES CONTRACTING METHODS AND... NIH: Senior Scientific Advisor for Extramural Research, Office of Extramural Research (R & D) and...

48 CFR 316.505 - Ordering.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Ordering. 316.505 Section 316.505 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES CONTRACTING METHODS AND... NIH: Senior Scientific Advisor for Extramural Research, Office of Extramural Research (R & D) and...

48 CFR 316.505 - Ordering.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Ordering. 316.505 Section 316.505 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES CONTRACTING METHODS AND... NIH: Senior Scientific Advisor for Extramural Research, Office of Extramural Research (R & D) and...

An information retrieval system for research file data

Treesearch

Joan E. Lengel; John W. Koning

1978-01-01

Research file data have been successfully retrieved at the Forest Products Laboratory through a high-speed cross-referencing system involving the computer program FAMULUS as modified by the Madison Academic Computing Center at the University of Wisconsin. The method of data input, transfer to computer storage, system utilization, and effectiveness are discussed....

A pragmatic method for electronic medical record-based observational studies: developing an electronic medical records retrieval system for clinical research

PubMed Central

Yamamoto, Keiichi; Sumi, Eriko; Yamazaki, Toru; Asai, Keita; Yamori, Masashi; Teramukai, Satoshi; Bessho, Kazuhisa; Yokode, Masayuki; Fukushima, Masanori

2012-01-01

Objective The use of electronic medical record (EMR) data is necessary to improve clinical research efficiency. However, it is not easy to identify patients who meet research eligibility criteria and collect the necessary information from EMRs because the data collection process must integrate various techniques, including the development of a data warehouse and translation of eligibility criteria into computable criteria. This research aimed to demonstrate an electronic medical records retrieval system (ERS) and an example of a hospital-based cohort study that identified both patients and exposure with an ERS. We also evaluated the feasibility and usefulness of the method. Design The system was developed and evaluated. Participants In total, 800 000 cases of clinical information stored in EMRs at our hospital were used. Primary and secondary outcome measures The feasibility and usefulness of the ERS, the method to convert text from eligible criteria to computable criteria, and a confirmation method to increase research data accuracy. Results To comprehensively and efficiently collect information from patients participating in clinical research, we developed an ERS. To create the ERS database, we designed a multidimensional data model optimised for patient identification. We also devised practical methods to translate narrative eligibility criteria into computable parameters. We applied the system to an actual hospital-based cohort study performed at our hospital and converted the test results into computable criteria. Based on this information, we identified eligible patients and extracted data necessary for confirmation by our investigators and for statistical analyses with our ERS. Conclusions We propose a pragmatic methodology to identify patients from EMRs who meet clinical research eligibility criteria. Our ERS allowed for the efficient collection of information on the eligibility of a given patient, reduced the labour required from the investigators and improved the reliability of the results. PMID:23117567

48 CFR 917.7300 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 917.7300 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Program Research and Development Announcements 917.7300 Scope of subpart. (a) This subpart discusses the policy for the use of a program research and development...

Damping characterization in large structures

NASA Technical Reports Server (NTRS)

Eke, Fidelis O.; Eke, Estelle M.

1991-01-01

This research project has as its main goal the development of methods for selecting the damping characteristics of components of a large structure or multibody system, in such a way as to produce some desired system damping characteristics. The main need for such an analytical device is in the simulation of the dynamics of multibody systems consisting, at least partially, of flexible components. The reason for this need is that all existing simulation codes for multibody systems require component-by-component characterization of complex systems, whereas requirements (including damping) often appear at the overall system level. The main goal was met in large part by the development of a method that will in fact synthesize component damping matrices from a given system damping matrix. The restrictions to the method are that the desired system damping matrix must be diagonal (which is almost always the case) and that interbody connections must be by simple hinges. In addition to the technical outcome, this project contributed positively to the educational and research infrastructure of Tuskegee University - a Historically Black Institution.

A surety engineering framework to reduce cognitive systems risks.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caudell, Thomas P.; Peercy, David Eugene; Caldera, Eva O.

Cognitive science research investigates the advancement of human cognition and neuroscience capabilities. Addressing risks associated with these advancements can counter potential program failures, legal and ethical issues, constraints to scientific research, and product vulnerabilities. Survey results, focus group discussions, cognitive science experts, and surety researchers concur technical risks exist that could impact cognitive science research in areas such as medicine, privacy, human enhancement, law and policy, military applications, and national security (SAND2006-6895). This SAND report documents a surety engineering framework and a process for identifying cognitive system technical, ethical, legal and societal risks and applying appropriate surety methods to reducemore » such risks. The framework consists of several models: Specification, Design, Evaluation, Risk, and Maturity. Two detailed case studies are included to illustrate the use of the process and framework. Several Appendices provide detailed information on existing cognitive system architectures; ethical, legal, and societal risk research; surety methods and technologies; and educing information research with a case study vignette. The process and framework provide a model for how cognitive systems research and full-scale product development can apply surety engineering to reduce perceived and actual risks.« less

Study on evaluation of construction reliability for engineering project based on fuzzy language operator

NASA Astrophysics Data System (ADS)

Shi, Yu-Fang; Ma, Yi-Yi; Song, Ping-Ping

2018-03-01

System Reliability Theory is a research hotspot of management science and system engineering in recent years, and construction reliability is useful for quantitative evaluation of project management level. According to reliability theory and target system of engineering project management, the defination of construction reliability appears. Based on fuzzy mathematics theory and language operator, value space of construction reliability is divided into seven fuzzy subsets and correspondingly, seven membership function and fuzzy evaluation intervals are got with the operation of language operator, which provides the basis of corresponding method and parameter for the evaluation of construction reliability. This method is proved to be scientific and reasonable for construction condition and an useful attempt for theory and method research of engineering project system reliability.

Are university rankings useful to improve research? A systematic review

PubMed Central

Momani, Shaher

2018-01-01

Introduction Concerns about reproducibility and impact of research urge improvement initiatives. Current university ranking systems evaluate and compare universities on measures of academic and research performance. Although often useful for marketing purposes, the value of ranking systems when examining quality and outcomes is unclear. The purpose of this study was to evaluate usefulness of ranking systems and identify opportunities to support research quality and performance improvement. Methods A systematic review of university ranking systems was conducted to investigate research performance and academic quality measures. Eligibility requirements included: inclusion of at least 100 doctoral granting institutions, be currently produced on an ongoing basis and include both global and US universities, publish rank calculation methodology in English and independently calculate ranks. Ranking systems must also include some measures of research outcomes. Indicators were abstracted and contrasted with basic quality improvement requirements. Exploration of aggregation methods, validity of research and academic quality indicators, and suitability for quality improvement within ranking systems were also conducted. Results A total of 24 ranking systems were identified and 13 eligible ranking systems were evaluated. Six of the 13 rankings are 100% focused on research performance. For those reporting weighting, 76% of the total ranks are attributed to research indicators, with 24% attributed to academic or teaching quality. Seven systems rely on reputation surveys and/or faculty and alumni awards. Rankings influence academic choice yet research performance measures are the most weighted indicators. There are no generally accepted academic quality indicators in ranking systems. Discussion No single ranking system provides a comprehensive evaluation of research and academic quality. Utilizing a combined approach of the Leiden, Thomson Reuters Most Innovative Universities, and the SCImago ranking systems may provide institutions with a more effective feedback for research improvement. Rankings which extensively rely on subjective reputation and “luxury” indicators, such as award winning faculty or alumni who are high ranking executives, are not well suited for academic or research performance improvement initiatives. Future efforts should better explore measurement of the university research performance through comprehensive and standardized indicators. This paper could serve as a general literature citation when one or more of university ranking systems are used in efforts to improve academic prominence and research performance. PMID:29513762

Usability in telemedicine systems-A literature survey.

PubMed

Klaassen, B; van Beijnum, B J F; Hermens, H J

2016-09-01

The rapid development of sensors and communication technologies enable the growth of new innovative services in healthcare, such as Telemedicine. An essential ingredient in the development of a telemedicine system and its final acceptance by end users are usability studies. The principles of usability engineering, evaluations and telemedicine are well established, and it may contribute to the adoption and eventually deployment of such systems and services. An in-depth usability analysis, including performance and attitude measures, requires knowledge about available usability techniques, and is depending on the amount of resources. Therefore it is worth investigating how usability methods are applied in developing telemedicine systems. Our hypothesis is: with increasing research and development of telemedicine systems, we expect that various usability methods are more equally employed for different end-user groups and applications. A literature survey was conducted to find telemedicine systems that have been evaluated for usability or ease of use. The elements of the PICO framework were used as a basis for the selection criteria in the literature search. The search was not limited by year. Two independent reviewers screened all search results first by title, and then by abstract for inclusion. Articles were included up to May 2015. In total, 127 publications were included in this survey. The number of publications on telemedicine systems significantly increased after 2008. Older adults and end-users with cardiovascular conditions were among largest target end-user groups. Remote monitoring systems were found the most, in 90 publications. Questionnaires are the most common means for evaluating telemedicine systems, and were found in 88 publications. Questionnaires are used frequently in studies focusing on cardiovascular diseases, Parkinson's disease and older adult conditions. Interviews are found the most in publications related to stroke. In total 71% of the publications were trial-orientated and the remaining process orientated. An increase in telemedicine research, development and applications is found worldwide, with the majority of publications conducted in America. Monitoring patients in their homes can lead to better healthcare at lower costs which implies an increased demand of new healthcare strategies like telemedicine. We expected that with the increase in telemedicine research and development, a greater range of usability methods would also be employed in the included publications. This is not the case. Researchers employed questionnaires as a preferred usability method for each type of telemedicine system and most end-users. However, in process-orientated studies a greater range of usability evaluations were applied, with fewer differences found in the amount of publications for each evaluation method. Questionnaires enable researchers to evaluate a system quickly on end users, as it requires less expertise on the evaluation method compared to the other methods. They are easily distributed and are customizable. The use of questionnaires is therefore an evaluation method of choice for a variety of telemedicine systems and end-users. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Resource loading system and method for use in atmosphere-containment scenarios

DOEpatents

Dilday, Jr., Daniel R.; Reyes, Roberto; Weidmeyer, Stanley

2017-09-12

The invention provides a system for preventing fluid exchange between the interior and exterior of containment enclosures such as process-, hazard-, and research-enclosure systems generally, gloveboxes, containment systems, isolation systems, confinement systems, cleanrooms, negative air systems, and positive air system areas while simultaneously providing material transfer into and out of the enclosures. The invention also provides a method for transporting material into or out of a containment structure.

48 CFR 917.7301 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Policy. 917.7301 Section 917.7301 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Program Research and Development Announcements 917.7301 Policy. ...

Spoof Detection for Finger-Vein Recognition System Using NIR Camera.

PubMed

Nguyen, Dat Tien; Yoon, Hyo Sik; Pham, Tuyen Danh; Park, Kang Ryoung

2017-10-01

Finger-vein recognition, a new and advanced biometrics recognition method, is attracting the attention of researchers because of its advantages such as high recognition performance and lesser likelihood of theft and inaccuracies occurring on account of skin condition defects. However, as reported by previous researchers, it is possible to attack a finger-vein recognition system by using presentation attack (fake) finger-vein images. As a result, spoof detection, named as presentation attack detection (PAD), is necessary in such recognition systems. Previous attempts to establish PAD methods primarily focused on designing feature extractors by hand (handcrafted feature extractor) based on the observations of the researchers about the difference between real (live) and presentation attack finger-vein images. Therefore, the detection performance was limited. Recently, the deep learning framework has been successfully applied in computer vision and delivered superior results compared to traditional handcrafted methods on various computer vision applications such as image-based face recognition, gender recognition and image classification. In this paper, we propose a PAD method for near-infrared (NIR) camera-based finger-vein recognition system using convolutional neural network (CNN) to enhance the detection ability of previous handcrafted methods. Using the CNN method, we can derive a more suitable feature extractor for PAD than the other handcrafted methods using a training procedure. We further process the extracted image features to enhance the presentation attack finger-vein image detection ability of the CNN method using principal component analysis method (PCA) for dimensionality reduction of feature space and support vector machine (SVM) for classification. Through extensive experimental results, we confirm that our proposed method is adequate for presentation attack finger-vein image detection and it can deliver superior detection results compared to CNN-based methods and other previous handcrafted methods.

Spoof Detection for Finger-Vein Recognition System Using NIR Camera

PubMed Central

Nguyen, Dat Tien; Yoon, Hyo Sik; Pham, Tuyen Danh; Park, Kang Ryoung

2017-01-01

Finger-vein recognition, a new and advanced biometrics recognition method, is attracting the attention of researchers because of its advantages such as high recognition performance and lesser likelihood of theft and inaccuracies occurring on account of skin condition defects. However, as reported by previous researchers, it is possible to attack a finger-vein recognition system by using presentation attack (fake) finger-vein images. As a result, spoof detection, named as presentation attack detection (PAD), is necessary in such recognition systems. Previous attempts to establish PAD methods primarily focused on designing feature extractors by hand (handcrafted feature extractor) based on the observations of the researchers about the difference between real (live) and presentation attack finger-vein images. Therefore, the detection performance was limited. Recently, the deep learning framework has been successfully applied in computer vision and delivered superior results compared to traditional handcrafted methods on various computer vision applications such as image-based face recognition, gender recognition and image classification. In this paper, we propose a PAD method for near-infrared (NIR) camera-based finger-vein recognition system using convolutional neural network (CNN) to enhance the detection ability of previous handcrafted methods. Using the CNN method, we can derive a more suitable feature extractor for PAD than the other handcrafted methods using a training procedure. We further process the extracted image features to enhance the presentation attack finger-vein image detection ability of the CNN method using principal component analysis method (PCA) for dimensionality reduction of feature space and support vector machine (SVM) for classification. Through extensive experimental results, we confirm that our proposed method is adequate for presentation attack finger-vein image detection and it can deliver superior detection results compared to CNN-based methods and other previous handcrafted methods. PMID:28974031

The Development of Evaluation Model for Internal Quality Assurance System of Dramatic Arts College of Bunditpattanasilpa Institute

ERIC Educational Resources Information Center

Sinthukhot, Kittisak; Srihamongkol, Yannapat; Luanganggoon, Nuchwana; Suwannoi, Paisan

2013-01-01

The research purpose was to develop an evaluation model for the internal quality assurance system of the dramatic arts College of Bunditpattanasilpa Institute. The Research and Development method was used as research methodology which was divided into three phases; "developing the model and its guideline", "trying out the actual…

Health systems research training enhances workplace research skills: a qualitative evaluation.

PubMed

Adams, Jolene; Schaffer, Angela; Lewin, Simon; Zwarenstein, Merrick; van der Walt, Hester

2003-01-01

In-service education is a widely used means of enhancing the skills of health service providers, for example, in undertaking research. However, the transfer of skills acquired during an education course to the workplace is seldom evaluated. The objectives of this study were to assess learner, teacher, and health service manager perceptions of the usefulness, in the work setting, of skills taught on a health systems research education course in South Africa and to assess the extent to which the course stimulated awareness and development of health systems research in the work setting. The education course was evaluated using a qualitative approach. Respondents were selected for interview using purposive sampling. Interviews were conducted with 39 respondents, including all of the major stakeholders. The interviews lasted between 20 and 60 minutes and were conducted either face to face or over the telephone. Thematic analysis was applied to the data, and key themes were identified. The course demystified health systems research and stimulated interest in reading and applying research findings. The course also changed participants' attitudes to routine data collection and was reported to have facilitated the application of informal research or problem-solving methods to everyday work situations. However, inadequate support within the workplace was a significant obstacle to applying the skills learned. A 2-week intensive, experiential course in health systems research methods can provide a mechanism for introducing basic research skills to a wide range of learners. Qualitative evaluation is a useful approach for assessing the impacts of education courses.

A framework for comparative analysis of health systems: experiences from the Asia Pacific Observatory on Health Systems and Policies.

PubMed

Healy, Judith Mary; Tang, Shenglan; Patcharanarumol, Walaiporn; Annear, Peter Leslie

2018-04-01

Drawing on published work from the Asia Pacific Observatory on Health Systems and Policies, this paper presents a framework for undertaking comparative studies on the health systems of countries. Organized under seven types of research approaches, such as national case-studies using a common format, this framework is illustrated using studies of low- and middle-income countries published by the Asia Pacific Observatory. Such studies are important contributions, since much of the health systems research literature comes from high-income countries. No one research approach, however, can adequately analyse a health system, let alone produce a nuanced comparison of different countries. Multiple comparative studies offer a better understanding, as a health system is a complex entity to describe and analyse. Appreciation of context and culture is crucial: what works in one country may not do so in another. Further, a single research method, such as performance indicators, or a study of a particular health system function or component, produces only a partial picture. Applying a comparative framework of several study approaches helps to inform and explain progress against health system targets, to identify differences among countries, and to assess policies and programmes. Multi-method comparative research produces policy-relevant learning that can assist countries to achieve Sustainable Development Goal 3: ensure healthy lives and promoting well-being for all at all ages by 2030.

Research status and evaluation system of heat source evaluation method for central heating

NASA Astrophysics Data System (ADS)

Sun, Yutong; Qi, Junfeng; Cao, Yi

2018-02-01

The central heating boiler room is a regional heat source heating center. It is also a kind of the urban environment pollution, it is an important section of building energy efficiency. This article through to the evaluation method of central heating boiler room and overviews of the researches during domestic and overseas, summarized the main influence factors affecting energy consumption of industrial boiler under the condition of stable operation. According to the principle of establishing evaluation index system. We can find that is great significance in energy saving and environmental protection for the content of the evaluation index system of the centralized heating system.

Homeland Security Research Improves the Nation's Ability to ...

EPA Pesticide Factsheets

Technical Brief Homeland Security (HS) Research develops data, tools, and technologies to minimize the impact of accidents, natural disasters, terrorist attacks, and other incidents that can result in toxic chemical, biological or radiological (CBR) contamination. HS Research develops ways to detect contamination, sampling strategies, sampling and analytical methods, cleanup methods, waste management approaches, exposure assessment methods, and decision support tools (including water system models). These contributions improve EPA’s response to a broad range of environmental disasters.

Evaluation of Alternative Altitude Scaling Methods for Thermal Ice Protection System in NASA Icing Research Tunnel

NASA Technical Reports Server (NTRS)

Lee, Sam; Addy, Harold; Broeren, Andy P.; Orchard, David M.

2017-01-01

A test was conducted at NASA Icing Research Tunnel to evaluate altitude scaling methods for thermal ice protection system. Two scaling methods based on Weber number were compared against a method based on the Reynolds number. The results generally agreed with the previous set of tests conducted in NRCC Altitude Icing Wind Tunnel. The Weber number based scaling methods resulted in smaller runback ice mass than the Reynolds number based scaling method. The ice accretions from the Weber number based scaling method also formed farther upstream. However there were large differences in the accreted ice mass between the two Weber number based scaling methods. The difference became greater when the speed was increased. This indicated that there may be some Reynolds number effects that isnt fully accounted for and warrants further study.

Optimization of PID Parameters Utilizing Variable Weight Grey-Taguchi Method and Particle Swarm Optimization

NASA Astrophysics Data System (ADS)

Azmi, Nur Iffah Mohamed; Arifin Mat Piah, Kamal; Yusoff, Wan Azhar Wan; Romlay, Fadhlur Rahman Mohd

2018-03-01

Controller that uses PID parameters requires a good tuning method in order to improve the control system performance. Tuning PID control method is divided into two namely the classical methods and the methods of artificial intelligence. Particle swarm optimization algorithm (PSO) is one of the artificial intelligence methods. Previously, researchers had integrated PSO algorithms in the PID parameter tuning process. This research aims to improve the PSO-PID tuning algorithms by integrating the tuning process with the Variable Weight Grey- Taguchi Design of Experiment (DOE) method. This is done by conducting the DOE on the two PSO optimizing parameters: the particle velocity limit and the weight distribution factor. Computer simulations and physical experiments were conducted by using the proposed PSO- PID with the Variable Weight Grey-Taguchi DOE and the classical Ziegler-Nichols methods. They are implemented on the hydraulic positioning system. Simulation results show that the proposed PSO-PID with the Variable Weight Grey-Taguchi DOE has reduced the rise time by 48.13% and settling time by 48.57% compared to the Ziegler-Nichols method. Furthermore, the physical experiment results also show that the proposed PSO-PID with the Variable Weight Grey-Taguchi DOE tuning method responds better than Ziegler-Nichols tuning. In conclusion, this research has improved the PSO-PID parameter by applying the PSO-PID algorithm together with the Variable Weight Grey-Taguchi DOE method as a tuning method in the hydraulic positioning system.

NASA Lewis Research Center's Program on Icing Research

NASA Technical Reports Server (NTRS)

Reinmann, J. J.; Shaw, R. J.; Olsen, W. A., Jr.

1982-01-01

The helicopter and general aviation, light transport, and commercial transport aircraft share common icing requirements: highly effective, lightweight, low power consuming deicing systems, and detailed knowledge of the aeropenalties due to ice on aircraft surfaces. To meet current and future needs, NASA has a broadbased icing research program which covers both research and engineering applications, and is well coordinated with the FAA, DOD, universities, industry, and some foreign governments. Research activity in ice protection systems, icing instrumentation, experimental methods, analytical modeling, and in-flight research are described.

Evaluation of Alternative Altitude Scaling Methods for Thermal Ice Protection System in NASA Icing Research Tunnel

NASA Technical Reports Server (NTRS)

Lee, Sam; Addy, Harold E. Jr.; Broeren, Andy P.; Orchard, David M.

2017-01-01

A test was conducted at NASA Icing Research Tunnel to evaluate altitude scaling methods for thermal ice protection system. Two new scaling methods based on Weber number were compared against a method based on Reynolds number. The results generally agreed with the previous set of tests conducted in NRCC Altitude Icing Wind Tunnel where the three methods of scaling were also tested and compared along with reference (altitude) icing conditions. In those tests, the Weber number-based scaling methods yielded results much closer to those observed at the reference icing conditions than the Reynolds number-based icing conditions. The test in the NASA IRT used a much larger, asymmetric airfoil with an ice protection system that more closely resembled designs used in commercial aircraft. Following the trends observed during the AIWT tests, the Weber number based scaling methods resulted in smaller runback ice than the Reynolds number based scaling, and the ice formed farther upstream. The results show that the new Weber number based scaling methods, particularly the Weber number with water loading scaling, continue to show promise for ice protection system development and evaluation in atmospheric icing tunnels.

Summary of Fluidic Thrust Vectoring Research Conducted at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Deere, Karen A.

2003-01-01

Interest in low-observable aircraft and in lowering an aircraft's exhaust system weight sparked decades of research for fixed geometry exhaust nozzles. The desire for such integrated exhaust nozzles was the catalyst for new fluidic control techniques; including throat area control, expansion control, and thrust-vector angle control. This paper summarizes a variety of fluidic thrust vectoring concepts that have been tested both experimentally and computationally at NASA Langley Research Center. The nozzle concepts are divided into three categories according to the method used for fluidic thrust vectoring: the shock vector control method, the throat shifting method, and the counterflow method. This paper explains the thrust vectoring mechanism for each fluidic method, provides examples of configurations tested for each method, and discusses the advantages and disadvantages of each method.

Transforming networking within the ESIP Federation using ResearchBit

NASA Astrophysics Data System (ADS)

Robinson, E.

2015-12-01

Geoscientists increasingly need interdisciplinary teams to solve their research problems. Currently, geoscientists use Research Networking (RN) systems to connect with each other and find people of similar and dissimilar interests. As we shift to digitally mediated scholarship, we need innovative methods for scholarly communication. Formal methods for scholarly communication are undergoing vast transformation owing to the open-access movement and reproducible research. However, informal scholarly communication that takes place at professional society meetings and conferences, like AGU, has received limited research attention relying primarily on serendipitous interaction. The ResearchBit project aims to fundamentally improve informal methods of scholarly communication by leveraging the serendipitous interactions of researchers and making them more aware of co-located potential collaborators with mutual interests. This presentation will describe our preliminary hardware testing done at the Federation for Earth Science Information Partners (ESIP) Summer meeting this past July and the initial recommendation system design. The presentation will also cover the cultural shifts and hurdles to introducing new technology, the privacy concerns of tracking technology and how we are addressing those new issues.

Multishaker modal testing

NASA Technical Reports Server (NTRS)

Craig, R. R., Jr.

1985-01-01

A component mode synthesis method for damped structures was developed and modal test methods were explored which could be employed to determine the relevant parameters required by the component mode synthesis method. Research was conducted on the following topics: (1) Development of a generalized time-domain component mode synthesis technique for damped systems; (2) Development of a frequency-domain component mode synthesis method for damped systems; and (3) Development of a system identification algorithm applicable to general damped systems. Abstracts are presented of the major publications which have been previously issued on these topics.

Mechano-micro/nano systems

NASA Astrophysics Data System (ADS)

Horie, Mikio

2004-10-01

In recent years, the researches about Micro/Nano Systems are down actively in the bio-medical research fields, DNA research fields, chemical analysis systems fields, etc. In the results, a new materials and new functions in the systems are developed. In this invited paper, Mechano-Micro/Nano Systems, especially, motion systems are introduced. First, the research activities concerning the Mechano-Micro/Nano Systems in the world(MST2003, MEMS2003 and MEMS2004) and in Japan(Researech Projects on Nanotechnology and Materials in Ministry of Education, Culture, Sports, Science and Technology) are shown. Secondary, my research activities are introduced. As my research activities, (1) a comb-drive static actuator for the motion convert mechanisms, (2) a micro-nano fabrication method by use of FAB(Fast Atom Beam) machines, (3) a micro optical mirror manipulator for inputs-outputs optical switches, (4) a miniature pantograph mechanism with large-deflective hinges and links made of plastics are discussed and their performances are explained.

A novel approach to quantify cybersecurity for electric power systems

NASA Astrophysics Data System (ADS)

Kaster, Paul R., Jr.

Electric Power grid cybersecurity is a topic gaining increased attention in academia, industry, and government circles, yet a method of quantifying and evaluating a system's security is not yet commonly accepted. In order to be useful, a quantification scheme must be able to accurately reflect the degree to which a system is secure, simply determine the level of security in a system using real-world values, model a wide variety of attacker capabilities, be useful for planning and evaluation, allow a system owner to publish information without compromising the security of the system, and compare relative levels of security between systems. Published attempts at quantifying cybersecurity fail at one or more of these criteria. This document proposes a new method of quantifying cybersecurity that meets those objectives. This dissertation evaluates the current state of cybersecurity research, discusses the criteria mentioned previously, proposes a new quantification scheme, presents an innovative method of modeling cyber attacks, demonstrates that the proposed quantification methodology meets the evaluation criteria, and proposes a line of research for future efforts.

Use of System Dynamics Modeling in Medical Education and Research Projects.

PubMed

Bozikov, Jadranka; Relic, Danko; Dezelic, Gjuro

2018-01-01

The paper reviews experiences and accomplishments in application of system dynamics modeling in education, training and research projects at the Andrija Stampar School of Public Health, a branch of the Zagreb University School of Medicine, Croatia. A number of simulation models developed over the past 40 years are briefly described with regard to real problems concerned, objectives and modeling methods and techniques used. Many of them have been developed as the individual students' projects as a part of their graduation, MSc or PhD theses and subsequently published in journals or conference proceedings. Some of them were later used in teaching and simulation training. System dynamics modeling proved to be not only powerful method for research and decision making but also a useful tool in medical and nursing education enabling better understanding of dynamic systems' behavior.

How far is mixed methods research in the field of health policy and systems in Africa? A scoping review.

PubMed

De Allegri, M; Sieleunou, I; Abiiro, G A; Ridde, V

2018-04-01

Both the academic and the policy community are calling for wider application of mixed methods research, suggesting that combined use of quantitative and qualitative methods is most suitable to assess and understand the complexities of health interventions. In spite of recent growth in mixed methods studies, limited efforts have been directed towards appraising and synthetizing to what extent and how mixed methods have been applied specifically to Health Policy and Systems Research (HPSR) in low- and middle-income countries (LMICs). We aimed at filling this gap in knowledge, by exploring the scope and quality of mixed methods research in the African context. We conducted a scoping review applying the framework developed by Arksey and O'Malley and modified by Levac et al. to identify and extract data from relevant studies published between 1950 and 2013. We limited our search to peer-reviewed HPSR publications in English, which combined at least one qualitative and one quantitative method and focused on Africa. Among the 105 studies that were retained for data extraction, over 60% were published after 2010. Nearly 50% of all studies addressed topics relevant to Health Systems, while Health Policy and Health Outcomes studies accounted respectively for 40% and 10% of all publications. The quality of the application of mixed methods varied greatly across studies, with a relatively small proportion of studies stating clearly defined research questions and differentiating quantitative and qualitative elements, including sample sizes and analytical approaches. The methodological weaknesses observed could be linked to the paucity of specific training opportunities available to people interested in applying mixed methods to HPSR in LMICs as well as to the limitations on word limit, scope and peer-review processes at the journals levels. Increasing training opportunities and enhancing journal flexibility may result in more and better quality mixed methods publications.

RESLanjut: The learning media for improve students understanding in embedded systems

NASA Astrophysics Data System (ADS)

Indrianto, Susanti, Meilia Nur Indah; Karina, Djunaidi

2017-08-01

The use of network in embedded system can be done with many kinds of network, with the use of mobile phones, bluetooths, modems, ethernet cards, wireless technology and so on. Using network in embedded system could help people to do remote controlling. On previous research, researchers found that many students have the ability to comprehend the basic concept of embedded system. They could also make embedded system tools but without network integration. And for that, a development is needed for the embedded system module. The embedded system practicum module design needs a prototype method in order to achieve the desired goal. The prototype method is often used in the real world. Or even, a prototype method is a part of products that consist of logic expression or external physical interface. The embedded system practicum module is meant to increase student comprehension of embedded system course, and also to encourage students to innovate on technology based tools. It is also meant to help teachers to teach the embedded system concept on the course. The student comprehension is hoped to increase with the use of practicum course.

The Effect of Teaching Methods and Learning Style on Learning Program Design in Web-Based Education Systems

ERIC Educational Resources Information Center

Hung, Yen-Chu

2012-01-01

The instructional value of web-based education systems has been an important area of research in information systems education. This study investigates the effect of various teaching methods on program design learning for students with specific learning styles in web-based education systems. The study takes first-year Computer Science and…

Decision Support Methods and Tools

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Alexandrov, Natalia M.; Brown, Sherilyn A.; Cerro, Jeffrey A.; Gumbert, Clyde r.; Sorokach, Michael R.; Burg, Cecile M.

2006-01-01

This paper is one of a set of papers, developed simultaneously and presented within a single conference session, that are intended to highlight systems analysis and design capabilities within the Systems Analysis and Concepts Directorate (SACD) of the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). This paper focuses on the specific capabilities of uncertainty/risk analysis, quantification, propagation, decomposition, and management, robust/reliability design methods, and extensions of these capabilities into decision analysis methods within SACD. These disciplines are discussed together herein under the name of Decision Support Methods and Tools. Several examples are discussed which highlight the application of these methods within current or recent aerospace research at the NASA LaRC. Where applicable, commercially available, or government developed software tools are also discussed

Digital communications: Microwave applications

NASA Astrophysics Data System (ADS)

Feher, K.

Transmission concepts and techniques of digital systems are presented; and practical state-of-the-art implementation of digital communications systems by line-of-sight microwaves is described. Particular consideration is given to statistical methods in digital transmission systems analysis, digital modulation methods, microwave amplifiers, system gain, m-ary and QAM microwave systems, correlative techniques and applications to digital radio systems, hybrid systems, digital microwave systems design, diversity and protection switching techniques, measurement techniques, and research and development trends and unsolved problems.

The advanced progress of precoding technology in 5g system

NASA Astrophysics Data System (ADS)

An, Chenyi

2017-09-01

With the development of technology, people began to put forward higher requirements for the mobile system, the emergence of the 5G subvert the track of the development of mobile communication technology. In the research of the core technology of 5G mobile communication, large scale MIMO, and precoding technology is a research hotspot. At present, the research on precoding technology in 5G system analyzes the various methods of linear precoding, the maximum ratio transmission (MRT) precoding algorithm, zero forcing (ZF) precoding algorithm, minimum mean square error (MMSE) precoding algorithm based on maximum signal to leakage and noise ratio (SLNR). Precoding algorithms are analyzed and summarized in detail. At the same time, we also do some research on nonlinear precoding methods, such as dirty paper precoding, THP precoding algorithm and so on. Through these analysis, we can find the advantages and disadvantages of each algorithm, as well as the development trend of each algorithm, grasp the development of the current 5G system precoding technology. Therefore, the research results and data of this paper can be used as reference for the development of precoding technology in 5G system.

Statistical assessment of speech system performance

NASA Technical Reports Server (NTRS)

Moshier, Stephen L.

1977-01-01

Methods for the normalization of performance tests results of speech recognition systems are presented. Technological accomplishments in speech recognition systems, as well as planned research activities are described.

Manufacturing Laboratory | Energy Systems Integration Facility | NREL

Science.gov Websites

Manufacturing Laboratory Manufacturing Laboratory Researchers in the Energy Systems Integration Facility's Manufacturing Laboratory develop methods and technologies to scale up renewable energy technology manufacturing capabilities. Photo of researchers and equipment in the Manufacturing Laboratory. Capability Hubs

Implementation of the CDC translational informatics platform - from genetic variants to the national Swedish Rheumatology Quality Register

PubMed Central

2013-01-01

Background Sequencing of the human genome and the subsequent analyses have produced immense volumes of data. The technological advances have opened new windows into genomics beyond the DNA sequence. In parallel, clinical practice generate large amounts of data. This represents an underused data source that has much greater potential in translational research than is currently realized. This research aims at implementing a translational medicine informatics platform to integrate clinical data (disease diagnosis, diseases activity and treatment) of Rheumatoid Arthritis (RA) patients from Karolinska University Hospital and their research database (biobanks, genotype variants and serology) at the Center for Molecular Medicine, Karolinska Institutet. Methods Requirements engineering methods were utilized to identify user requirements. Unified Modeling Language and data modeling methods were used to model the universe of discourse and data sources. Oracle11g were used as the database management system, and the clinical development center (CDC) was used as the application interface. Patient data were anonymized, and we employed authorization and security methods to protect the system. Results We developed a user requirement matrix, which provided a framework for evaluating three translation informatics systems. The implementation of the CDC successfully integrated biological research database (15172 DNA, serum and synovial samples, 1436 cell samples and 65 SNPs per patient) and clinical database (5652 clinical visit) for the cohort of 379 patients presents three profiles. Basic functionalities provided by the translational medicine platform are research data management, development of bioinformatics workflow and analysis, sub-cohort selection, and re-use of clinical data in research settings. Finally, the system allowed researchers to extract subsets of attributes from cohorts according to specific biological, clinical, or statistical features. Conclusions Research and clinical database integration is a real challenge and a road-block in translational research. Through this research we addressed the challenges and demonstrated the usefulness of CDC. We adhered to ethical regulations pertaining to patient data, and we determined that the existing software solutions cannot meet the translational research needs at hand. We used RA as a test case since we have ample data on active and longitudinal cohort. PMID:23548156

Broad and Inconsistent Muscle Food Classification Is Problematic for Dietary Guidance in the U.S.

PubMed Central

O’Connor, Lauren E.; Campbell, Wayne W.; Woerner, Dale R.; Belk, Keith E.

2017-01-01

Dietary recommendations regarding consumption of muscle foods, such as red meat, processed meat, poultry or fish, largely rely on current dietary intake assessment methods. This narrative review summarizes how U.S. intake values for various types of muscle foods are grouped and estimated via methods that include: (1) food frequency questionnaires; (2) food disappearance data from the U.S. Department of Agriculture Economic Research Service; and (3) dietary recall information from the National Health and Nutrition Examination Survey data. These reported methods inconsistently classify muscle foods into groups, such as those previously listed, which creates discrepancies in estimated intakes. Researchers who classify muscle foods into these groups do not consistently considered nutrient content, in turn leading to implications of scientific conclusions and dietary recommendations. Consequentially, these factors demonstrate a need for a more universal muscle food classification system. Further specification to this system would improve accuracy and precision in which researchers can classify muscle foods in nutrition research. Future multidisciplinary collaboration is needed to develop a new classification system via systematic review protocol of current literature. PMID:28926963

Optimization of the efficiency of search operations in the relational database of radio electronic systems

NASA Astrophysics Data System (ADS)

Wajszczyk, Bronisław; Biernacki, Konrad

2018-04-01

The increase of interoperability of radio electronic systems used in the Armed Forces requires the processing of very large amounts of data. Requirements for the integration of information from many systems and sensors, including radar recognition, electronic and optical recognition, force to look for more efficient methods to support information retrieval in even-larger database resources. This paper presents the results of research on methods of improving the efficiency of databases using various types of indexes. The data structure indexing technique is a solution used in RDBMS systems (relational database management system). However, the analysis of the performance of indices, the description of potential applications, and in particular the presentation of a specific scale of performance growth for individual indices are limited to few studies in this field. This paper contains analysis of methods affecting the work efficiency of a relational database management system. As a result of the research, a significant increase in the efficiency of operations on data was achieved through the strategy of indexing data structures. The presentation of the research topic discussed in this paper mainly consists of testing the operation of various indexes against the background of different queries and data structures. The conclusions from the conducted experiments allow to assess the effectiveness of the solutions proposed and applied in the research. The results of the research indicate the existence of a real increase in the performance of operations on data using indexation of data structures. In addition, the level of this growth is presented, broken down by index types.

Multidisciplinary Optimization Methods for Aircraft Preliminary Design

NASA Technical Reports Server (NTRS)

Kroo, Ilan; Altus, Steve; Braun, Robert; Gage, Peter; Sobieski, Ian

1994-01-01

This paper describes a research program aimed at improved methods for multidisciplinary design and optimization of large-scale aeronautical systems. The research involves new approaches to system decomposition, interdisciplinary communication, and methods of exploiting coarse-grained parallelism for analysis and optimization. A new architecture, that involves a tight coupling between optimization and analysis, is intended to improve efficiency while simplifying the structure of multidisciplinary, computation-intensive design problems involving many analysis disciplines and perhaps hundreds of design variables. Work in two areas is described here: system decomposition using compatibility constraints to simplify the analysis structure and take advantage of coarse-grained parallelism; and collaborative optimization, a decomposition of the optimization process to permit parallel design and to simplify interdisciplinary communication requirements.

A New PC and LabVIEW Package Based System for Electrochemical Investigations.

PubMed

Stević, Zoran; Andjelković, Zoran; Antić, Dejan

2008-03-15

The paper describes a new PC and LabVIEW software package based system forelectrochemical research. An overview of well known electrochemical methods, such aspotential measurements, galvanostatic and potentiostatic method, cyclic voltammetry andEIS is given. Electrochemical impedance spectroscopy has been adapted for systemscontaining large capacitances. For signal generation and recording of the response ofinvestigated electrochemical cell, a measurement and control system was developed, basedon a PC P4. The rest of the hardware consists of a commercially available AD-DA converterand an external interface for analog signal processing. The interface is a result of authorsown research. The software platform for desired measurement methods is LabVIEW 8.2package, which is regarded as a high standard in the area of modern virtual instruments. Thedeveloped system was adjusted, tested and compared with commercially available systemand ORCAD simulation.

National Wind Technology Center | NREL

Science.gov Websites

. Wind Energy Research Wind turbine blade Wind energy research at the NWTC allows for validation and verification of large and small components and wind turbine systems. Photo by Dennis Schroeder / NREL 40935 Wind energy research at the NWTC has pioneered wind turbine components, systems, and modeling methods

Pre-Service Teachers' Comments toward Official Teacher Selection System (Civil Servant Selection Examination, KPSS) in Turkey: A Qualitative Analysis

ERIC Educational Resources Information Center

Ugulu, Ilker; Yorek, Nurettin

2015-01-01

The purpose of this research is to investigate the opinions of the pre-service teachers toward teacher selection system and civil servant selection exam (KPSS). In this study, qualitative re-search methods and semi-structured interviews were used and researcher-made questionnaires containing open-ended questions were administered. The study group…

Selecting a dynamic simulation modeling method for health care delivery research-part 2: report of the ISPOR Dynamic Simulation Modeling Emerging Good Practices Task Force.

PubMed

Marshall, Deborah A; Burgos-Liz, Lina; IJzerman, Maarten J; Crown, William; Padula, William V; Wong, Peter K; Pasupathy, Kalyan S; Higashi, Mitchell K; Osgood, Nathaniel D

2015-03-01

In a previous report, the ISPOR Task Force on Dynamic Simulation Modeling Applications in Health Care Delivery Research Emerging Good Practices introduced the fundamentals of dynamic simulation modeling and identified the types of health care delivery problems for which dynamic simulation modeling can be used more effectively than other modeling methods. The hierarchical relationship between the health care delivery system, providers, patients, and other stakeholders exhibits a level of complexity that ought to be captured using dynamic simulation modeling methods. As a tool to help researchers decide whether dynamic simulation modeling is an appropriate method for modeling the effects of an intervention on a health care system, we presented the System, Interactions, Multilevel, Understanding, Loops, Agents, Time, Emergence (SIMULATE) checklist consisting of eight elements. This report builds on the previous work, systematically comparing each of the three most commonly used dynamic simulation modeling methods-system dynamics, discrete-event simulation, and agent-based modeling. We review criteria for selecting the most suitable method depending on 1) the purpose-type of problem and research questions being investigated, 2) the object-scope of the model, and 3) the method to model the object to achieve the purpose. Finally, we provide guidance for emerging good practices for dynamic simulation modeling in the health sector, covering all aspects, from the engagement of decision makers in the model design through model maintenance and upkeep. We conclude by providing some recommendations about the application of these methods to add value to informed decision making, with an emphasis on stakeholder engagement, starting with the problem definition. Finally, we identify areas in which further methodological development will likely occur given the growing "volume, velocity and variety" and availability of "big data" to provide empirical evidence and techniques such as machine learning for parameter estimation in dynamic simulation models. Upon reviewing this report in addition to using the SIMULATE checklist, the readers should be able to identify whether dynamic simulation modeling methods are appropriate to address the problem at hand and to recognize the differences of these methods from those of other, more traditional modeling approaches such as Markov models and decision trees. This report provides an overview of these modeling methods and examples of health care system problems in which such methods have been useful. The primary aim of the report was to aid decisions as to whether these simulation methods are appropriate to address specific health systems problems. The report directs readers to other resources for further education on these individual modeling methods for system interventions in the emerging field of health care delivery science and implementation. Copyright © 2015. Published by Elsevier Inc.

Nonrecursive formulations of multibody dynamics and concurrent multiprocessing

NASA Technical Reports Server (NTRS)

Kurdila, Andrew J.; Menon, Ramesh

1993-01-01

Since the late 1980's, research in recursive formulations of multibody dynamics has flourished. Historically, much of this research can be traced to applications of low dimensionality in mechanism and vehicle dynamics. Indeed, there is little doubt that recursive order N methods are the method of choice for this class of systems. This approach has the advantage that a minimal number of coordinates are utilized, parallelism can be induced for certain system topologies, and the method is of order N computational cost for systems of N rigid bodies. Despite the fact that many authors have dismissed redundant coordinate formulations as being of order N(exp 3), and hence less attractive than recursive formulations, we present recent research that demonstrates that at least three distinct classes of redundant, nonrecursive multibody formulations consistently achieve order N computational cost for systems of rigid and/or flexible bodies. These formulations are as follows: (1) the preconditioned range space formulation; (2) penalty methods; and (3) augmented Lagrangian methods for nonlinear multibody dynamics. The first method can be traced to its foundation in equality constrained quadratic optimization, while the last two methods have been studied extensively in the context of coercive variational boundary value problems in computational mechanics. Until recently, however, they have not been investigated in the context of multibody simulation, and present theoretical questions unique to nonlinear dynamics. All of these nonrecursive methods have additional advantages with respect to recursive order N methods: (1) the formalisms retain the highly desirable order N computational cost; (2) the techniques are amenable to concurrent simulation strategies; (3) the approaches do not depend upon system topology to induce concurrency; and (4) the methods can be derived to balance the computational load automatically on concurrent multiprocessors. In addition to the presentation of the fundamental formulations, this paper presents new theoretical results regarding the rate of convergence of order N constraint stabilization schemes associated with the newly introduced class of methods.

Hybrid Method for Mobile learning Cooperative: Study of Timor Leste

NASA Astrophysics Data System (ADS)

da Costa Tavares, Ofelia Cizela; Suyoto; Pranowo

2018-02-01

In the modern world today the decision support system is very useful to help in solving a problem, so this study discusses the learning process of savings and loan cooperatives in Timor Leste. The purpose of the observation is that the people of Timor Leste are still in the process of learning the use DSS for good saving and loan cooperative process. Based on existing research on the Timor Leste community on credit cooperatives, a mobile application will be built that will help the cooperative learning process in East Timorese society. The methods used for decision making are AHP (Analytical Hierarchy Process) and SAW (simple additive Weighting) method to see the result of each criterion and the weight of the value. The result of this research is mobile leaning cooperative in decision support system by using SAW and AHP method. Originality Value: Changed the two methods of mobile application development using AHP and SAW methods to help the decision support system process of a savings and credit cooperative in Timor Leste.

Application Mail Tracking Using RSA Algorithm As Security Data and HOT-Fit a Model for Evaluation System

NASA Astrophysics Data System (ADS)

Permadi, Ginanjar Setyo; Adi, Kusworo; Gernowo, Rahmad

2018-02-01

RSA algorithm give security in the process of the sending of messages or data by using 2 key, namely private key and public key .In this research to ensure and assess directly systems are made have meet goals or desire using a comprehensive evaluation methods HOT-Fit system .The purpose of this research is to build a information system sending mail by applying methods of security RSA algorithm and to evaluate in uses the method HOT-Fit to produce a system corresponding in the faculty physics. Security RSA algorithm located at the difficulty of factoring number of large coiled factors prima, the results of the prime factors has to be done to obtain private key. HOT-Fit has three aspects assessment, in the aspect of technology judging from the system status, the quality of system and quality of service. In the aspect of human judging from the use of systems and satisfaction users while in the aspect of organization judging from the structure and environment. The results of give a tracking system sending message based on the evaluation acquired.

Mobile Food Ordering Application using Android OS Platform

NASA Astrophysics Data System (ADS)

Yosep Ricky, Michael

2014-03-01

The purpose of this research is making an ordering food application based on Android with New Order, Order History, Restaurant Profile, Order Status, Tracking Order, and Setting Profile features. The research method used in this research is water model of System Development Life Cycle (SDLC) method with following phases: requirement definition, analyzing and determining the features needed in developing application and making the detail definition of each features, system and software design, designing the flow of developing application by using storyboard design, user experience design, Unified Modeling Language (UML) design, and database structure design, implementation an unit testing, making database and translating the result of designs to programming language code then doing unit testing, integration and System testing, integrating unit program to one unit system then doing system testing, operation and maintenance, operating the result of system testing and if any changes and reparations needed then the previous phases could be back. The result of this research is an ordering food application based on Android for customer and courier user, and a website for restaurant and admin user. The conclusion of this research is to help customer in making order easily, to give detail information needed by customer, to help restaurant in receiving order, and to help courier while doing delivery.

NASA gear research and its probable effect on rotorcraft transmission design

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.; Townsend, D. P.; Coy, J. J.

1979-01-01

The NASA Lewis Research Center devised a comprehensive gear technology research program beginning in 1969, the results of which are being integrated into the NASA civilian Helicopter Transmission System Technology Program. Attention is given to the results of this gear research and those programs which are presently being undertaken. In addition, research programs studying pitting fatigue, gear steels and processing, life prediction methods, gear design and dynamics, elastohydrodynamic lubrication, lubrication methods and gear noise are presented. Finally, the impact of advanced gear research technology on rotorcraft transmission design is discussed.

Organizational Culture and the Deployment of Agile Methods: The Competing Values Model View

NASA Astrophysics Data System (ADS)

Iivari, Juhani; Iivari, Netta

A number of researchers have identified organizational culture as a factor that potentially affects the deployment of agile systems development methods. Inspired by the study of Iivari and Huisman (2007), which focused on the deployment of traditional systems development methods, the present paper proposes a number of hypotheses about the influence of organizational culture on the deployment of agile methods.

Binder model system to be used for determination of prepolymer functionality

NASA Technical Reports Server (NTRS)

Martinelli, F. J.; Hodgkin, J. H.

1971-01-01

Development of a method for determining the functionality distribution of prepolymers used for rocket binders is discussed. Research has been concerned with accurately determining the gel point of a model polyester system containing a single trifunctional crosslinker, and the application of these methods to more complicated model systems containing a second trifunctional crosslinker, monofunctional ingredients, or a higher functionality crosslinker. Correlations of observed with theoretical gel points for these systems would allow the methods to be applied directly to prepolymers.

Mathematical Techniques for Nonlinear System Theory.

DTIC Science & Technology

1981-09-01

This report deals with research results obtained in the following areas: (1) Finite-dimensional linear system theory by algebraic methods--linear...Infinite-dimensional linear systems--realization theory of infinite-dimensional linear systems; (3) Nonlinear system theory --basic properties of

Entrepreneur environment management behavior evaluation method derived from environmental economy.

PubMed

Zhang, Lili; Hou, Xilin; Xi, Fengru

2013-12-01

Evaluation system can encourage and guide entrepreneurs, and impel them to perform well in environment management. An evaluation method based on advantage structure is established. It is used to analyze entrepreneur environment management behavior in China. Entrepreneur environment management behavior evaluation index system is constructed based on empirical research. Evaluation method of entrepreneurs is put forward, from the point of objective programming-theory to alert entrepreneurs concerned to think much of it, which means to take minimized objective function as comprehensive evaluation result and identify disadvantage structure pattern. Application research shows that overall behavior of Chinese entrepreneurs environmental management are good, specially, environment strategic behavior are best, environmental management behavior are second, cultural behavior ranks last. Application results show the efficiency and feasibility of this method. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Research on uncertainty evaluation measure and method of voltage sag severity

NASA Astrophysics Data System (ADS)

Liu, X. N.; Wei, J.; Ye, S. Y.; Chen, B.; Long, C.

2018-01-01

Voltage sag is an inevitable serious problem of power quality in power system. This paper focuses on a general summarization and reviews on the concepts, indices and evaluation methods about voltage sag severity. Considering the complexity and uncertainty of influencing factors, damage degree, the characteristics and requirements of voltage sag severity in the power source-network-load sides, the measure concepts and their existing conditions, evaluation indices and methods of voltage sag severity have been analyzed. Current evaluation techniques, such as stochastic theory, fuzzy logic, as well as their fusion, are reviewed in detail. An index system about voltage sag severity is provided for comprehensive study. The main aim of this paper is to propose thought and method of severity research based on advanced uncertainty theory and uncertainty measure. This study may be considered as a valuable guide for researchers who are interested in the domain of voltage sag severity.

Using a mixed-methods design to examine nurse practitioner integration in British Columbia.

PubMed

Sangster-Gormley, Esther; Griffith, Janessa; Schreiber, Rita; Borycki, Elizabeth

2015-07-01

To discuss and provide examples of how mixed-methods research was used to evaluate the integration of nurse practitioners (NPs) into a Canadian province. Legislation enabling NPs to practise in British Columbia (BC) was enacted in 2005. This research evaluated the integration of NPs and their effect on the BC healthcare system. Data were collected using surveys, focus groups, participant interviews and case studies over three years. Data sources and methods were triangulated to determine how the findings addressed the research questions. The challenges and benefits of using the multiphase design are highlighted in the paper. The multiphase mixed-methods research design was selected because of its applicability to evaluation research. The design proved to be robust and flexible in answering research questions. As sub-studies within the multiphase design are often published separately, it can be difficult for researchers to find examples. This paper highlights ways that a multiphase mixed-methods design can be conducted for researchers unfamiliar with the process.

Flight Test Results of a GPS-Based Pitot-Static Calibration Method Using Output-Error Optimization for a Light Twin-Engine Airplane

NASA Technical Reports Server (NTRS)

Martos, Borja; Kiszely, Paul; Foster, John V.

2011-01-01

As part of the NASA Aviation Safety Program (AvSP), a novel pitot-static calibration method was developed to allow rapid in-flight calibration for subscale aircraft while flying within confined test areas. This approach uses Global Positioning System (GPS) technology coupled with modern system identification methods that rapidly computes optimal pressure error models over a range of airspeed with defined confidence bounds. This method has been demonstrated in subscale flight tests and has shown small 2- error bounds with significant reduction in test time compared to other methods. The current research was motivated by the desire to further evaluate and develop this method for full-scale aircraft. A goal of this research was to develop an accurate calibration method that enables reductions in test equipment and flight time, thus reducing costs. The approach involved analysis of data acquisition requirements, development of efficient flight patterns, and analysis of pressure error models based on system identification methods. Flight tests were conducted at The University of Tennessee Space Institute (UTSI) utilizing an instrumented Piper Navajo research aircraft. In addition, the UTSI engineering flight simulator was used to investigate test maneuver requirements and handling qualities issues associated with this technique. This paper provides a summary of piloted simulation and flight test results that illustrates the performance and capabilities of the NASA calibration method. Discussion of maneuver requirements and data analysis methods is included as well as recommendations for piloting technique.

Assessing Primary Representational System (PRS) Preference for Neurolinguistic Programming (NLP) Using Three Methods.

ERIC Educational Resources Information Center

Dorn, Fred J.

1983-01-01

Considered three methods of identifying Primary Representational System (PRS)--an interview, a word list, and a self-report--in a study of 120 college students. Results suggested the three methods offer little to counselors either collectively or individually. Results did not validate the PRS construct, suggesting the need for further research.…

Development of coal-feeding systems at the Morgantown Energy Research Center

NASA Technical Reports Server (NTRS)

Hobday, J. M.

1977-01-01

Systems for feeding crushed and pulverized coal into coal conversion reactor vessels are described. Pneumatic methods for feeding pulverized coal, slurry feeders, and coal pumps, methods for steam pickup, and a method for drying a water-coal slurry in a steam fluidized bed subsequent to feeding the coal into a reactor vessel are included.

The Development of a New Method of Idiographic Measurement for Dynamic Assessment Intervention

ERIC Educational Resources Information Center

Hurley, Emma; Murphy, Raegan

2015-01-01

This paper proposes a new method of idiographic measurement for dynamic assessment (DA) intervention. There are two main methods of measurement for DA intervention; split-half tests and integrated scoring systems. Split-half tests of ability have proved useful from a research perspective. Integrated scoring systems coupled with case studies are…

Effectiveness of United Nation’s Missions in Africa: A Comparative Assessment of UNAMSIL, MONUC, and UNAMID

DTIC Science & Technology

2010-06-11

29 CHAPTER 3 RESEARCH METHODOLOGY ................................................................30 Congruence Method ...32 Method of Research/Criteria of Analysis...systems of taxation have collapsed and physical infrastructure has been destroyed, trade and any form of business are cut off and a climate of

Personnel Information Requirements for the Support of Air Force Squadron Commanders’ Information Systems

DTIC Science & Technology

1989-12-01

problem, was the library search procedure. In their book, Research Methods In Librarianship , Charles 24 Busha and Stephen Harter contend library...Planning," Information and Management, 6:11-25 (1983). 5. Busha, Charles H. and Stephen P. Hatter, Research Methods In Librarianship : Techniques and

Accuracy of the NDI Wave Speech Research System

ERIC Educational Resources Information Center

Berry, Jeffrey J.

2011-01-01

Purpose: This work provides a quantitative assessment of the positional tracking accuracy of the NDI Wave Speech Research System. Method: Three experiments were completed: (a) static rigid-body tracking across different locations in the electromagnetic field volume, (b) dynamic rigid-body tracking across different locations within the…

48 CFR 15.602 - Policy.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., Small Business Innovation Research topics, Small Business Technology Transfer Research topics, Program Research and Development Announcements, or any other Government-initiated solicitation or program. When the....602 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACTING METHODS AND...

Electro-optic and holographic measurement techniques for the atmospheric sciences. [considering spacecraft simulation applications

NASA Technical Reports Server (NTRS)

Moore, W. W., Jr.; Lemons, J. F.; Kurtz, R. L.; Liu, H.-K.

1977-01-01

A comprehensive examination is made of recent advanced research directions in the applications of electro-optical and holographic instrumentations and methods to atmospheric sciences problems. In addition, an overview is given of the in-house research program for environmental and atmospheric measurements with emphasis on particulates systems. Special treatment is made of the instrument methods and applications work in the areas of laser scattering spectrometers and pulsed holography sizing systems. Selected engineering tests data on space simulation chamber programs are discussed.

MRIVIEW: An interactive computational tool for investigation of brain structure and function

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ranken, D.; George, J.

MRIVIEW is a software system which uses image processing and visualization to provide neuroscience researchers with an integrated environment for combining functional and anatomical information. Key features of the software include semi-automated segmentation of volumetric head data and an interactive coordinate reconciliation method which utilizes surface visualization. The current system is a precursor to a computational brain atlas. We describe features this atlas will incorporate, including methods under development for visualizing brain functional data obtained from several different research modalities.

Applications of hybrid and digital computation methods in aerospace-related sciences and engineering. [problem solving methods at the University of Houston

NASA Technical Reports Server (NTRS)

Huang, C. J.; Motard, R. L.

1978-01-01

The computing equipment in the engineering systems simulation laboratory of the Houston University Cullen College of Engineering is described and its advantages are summarized. The application of computer techniques in aerospace-related research psychology and in chemical, civil, electrical, industrial, and mechanical engineering is described in abstracts of 84 individual projects and in reprints of published reports. Research supports programs in acoustics, energy technology, systems engineering, and environment management as well as aerospace engineering.

The utilisation of health research in policy-making: concepts, examples and methods of assessment

PubMed Central

Hanney, Stephen R; Gonzalez-Block, Miguel A; Buxton, Martin J; Kogan, Maurice

2003-01-01

The importance of health research utilisation in policy-making, and of understanding the mechanisms involved, is increasingly recognised. Recent reports calling for more resources to improve health in developing countries, and global pressures for accountability, draw greater attention to research-informed policy-making. Key utilisation issues have been described for at least twenty years, but the growing focus on health research systems creates additional dimensions. The utilisation of health research in policy-making should contribute to policies that may eventually lead to desired outcomes, including health gains. In this article, exploration of these issues is combined with a review of various forms of policy-making. When this is linked to analysis of different types of health research, it assists in building a comprehensive account of the diverse meanings of research utilisation. Previous studies report methods and conceptual frameworks that have been applied, if with varying degrees of success, to record utilisation in policy-making. These studies reveal various examples of research impact within a general picture of underutilisation. Factors potentially enhancing utilisation can be identified by exploration of: priority setting; activities of the health research system at the interface between research and policy-making; and the role of the recipients, or 'receptors', of health research. An interfaces and receptors model provides a framework for analysis. Recommendations about possible methods for assessing health research utilisation follow identification of the purposes of such assessments. Our conclusion is that research utilisation can be better understood, and enhanced, by developing assessment methods informed by conceptual analysis and review of previous studies. PMID:12646071

Real-time in-flight engine performance and health monitoring techniques for flight research application

NASA Technical Reports Server (NTRS)

Ray, Ronald J.; Hicks, John W.; Wichman, Keith D.

1991-01-01

Procedures for real time evaluation of the inflight health and performance of gas turbine engines and related systems were developed to enhance flight test safety and productivity. These techniques include the monitoring of the engine, the engine control system, thrust vectoring control system health, and the detection of engine stalls. Real time performance techniques were developed for the determination and display of inflight thrust and for aeroperformance drag polars. These new methods were successfully shown on various research aircraft at NASA-Dryden. The capability of NASA's Western Aeronautical Test Range and the advanced data acquisition systems were key factors for implementation and real time display of these methods.

Corruption Early Prevention: Decision Support System for President of the Republic of Indonesia

NASA Astrophysics Data System (ADS)

Sasmoko; Widhoyoko, S. A.; Ariyanto, S.; Indrianti, Y.; Noerlina; Muqsith, A. M.; Alamsyah, M.

2017-01-01

Corruption is an extraordinary crime, and then the prevention must also be extraordinary, simultaneously (national) in the form of early warning that involves all elements; government, industry, and society. To realize it the system needs to be built which in this study is called the Corruption Early Prevention (CEP) as a Decision Support System for President of the Republic of Indonesia. This study aims to examine 1) how is the construct of the Corruption Early Prevention as a Decision Support System for President of the Republic of Indonesia?, and 2) how is the design form of the system of Corruption Early Prevention as a Decision Support System for President of Republic of Indonesia? The research method is using Neuro-Research which is the collaboration of qualitative and quantitative research methods and the model development of Information Technology (IT). The research found that: 1) the construct of CEP is theoretically feasible, valid and reliable by content to be developed in the context of the prevention of corruption in Indonesia as an early prevention system that diagnoses Indonesia simultaneously and in real time, and 2) the concept of system design and business process of CEP is predicted to be realized in the IT-based program.

Social Ecology of Asthma: Engaging Stakeholders in Integrating Health Behavior Theories and Practice-Based Evidence through Systems Mapping

ERIC Educational Resources Information Center

Gillen, Emily M.; Hassmiller Lich, Kristen; Yeatts, Karin B.; Hernandez, Michelle L.; Smith, Timothy W.; Lewis, Megan A.

2014-01-01

This article describes a process for integrating health behavior and social science theories with practice-based insights using participatory systems thinking and diagramming methods largely inspired by system dynamics methods. This integration can help close the gap between research and practice in health education and health behavior by offering…

[The primary research and development of software oversampling mapping system for electrocardiogram].

PubMed

Zhou, Yu; Ren, Jie

2011-04-01

We put forward a new concept of software oversampling mapping system for electrocardiogram (ECG) to assist the research of the ECG inverse problem to improve the generality of mapping system and the quality of mapping signals. We then developed a conceptual system based on the traditional ECG detecting circuit, Labview and DAQ card produced by National Instruments, and at the same time combined the newly-developed oversampling method into the system. The results indicated that the system could map ECG signals accurately and the quality of the signals was good. The improvement of hardware and enhancement of software made the system suitable for mapping in different situations. So the primary development of the software for oversampling mapping system was successful and further research and development can make the system a powerful tool for researching ECG inverse problem.

How the provenance of electronic health record data matters for research: a case example using system mapping.

PubMed

Johnson, Karin E; Kamineni, Aruna; Fuller, Sharon; Olmstead, Danielle; Wernli, Karen J

2014-01-01

The use of electronic health records (EHRs) for research is proceeding rapidly, driven by computational power, analytical techniques, and policy. However, EHR-based research is limited by the complexity of EHR data and a lack of understanding about data provenance, meaning the context under which the data were collected. This paper presents system flow mapping as a method to help researchers more fully understand the provenance of their EHR data as it relates to local workflow. We provide two specific examples of how this method can improve data identification, documentation, and processing. EHRs store clinical and administrative data, often in unstructured fields. Each clinical system has a unique and dynamic workflow, as well as an EHR customized for local use. The EHR customization may be influenced by a broader context such as documentation required for billing. We present a case study with two examples of using system flow mapping to characterize EHR data for a local colorectal cancer screening process. System flow mapping demonstrated that information entered into the EHR during clinical practice required interpretation and transformation before it could be accurately applied to research. We illustrate how system flow mapping shaped our knowledge of the quality and completeness of data in two examples: (1) determining colonoscopy indication as recorded in the EHR, and (2) discovering a specific EHR form that captured family history. Researchers who do not consider data provenance risk compiling data that are systematically incomplete or incorrect. For example, researchers who are not familiar with the clinical workflow under which data were entered might miss or misunderstand patient information or procedure and diagnostic codes. Data provenance is a fundamental characteristic of research data from EHRs. Given the diversity of EHR platforms and system workflows, researchers need tools for evaluating and reporting data availability, quality, and transformations. Our case study illustrates how system mapping can inform researchers about the provenance of their data as it pertains to local workflows.

Safety leadership and systems thinking: application and evaluation of a Risk Management Framework in the mining industry.

PubMed

Donovan, Sarah-Louise; Salmon, Paul M; Lenné, Michael G; Horberry, Tim

2017-10-01

Safety leadership is an important factor in supporting safety in high-risk industries. This article contends that applying systems-thinking methods to examine safety leadership can support improved learning from incidents. A case study analysis was undertaken of a large-scale mining landslide incident in which no injuries or fatalities were incurred. A multi-method approach was adopted, in which the Critical Decision Method, Rasmussen's Risk Management Framework and Accimap method were applied to examine the safety leadership decisions and actions which enabled the safe outcome. The approach enabled Rasmussen's predictions regarding safety and performance to be examined in the safety leadership context, with findings demonstrating the distribution of safety leadership across leader and system levels, and the presence of vertical integration as key to supporting the successful safety outcome. In doing so, the findings also demonstrate the usefulness of applying systems-thinking methods to examine and learn from incidents in terms of what 'went right'. The implications, including future research directions, are discussed. Practitioner Summary: This paper presents a case study analysis, in which systems-thinking methods are applied to the examination of safety leadership decisions and actions during a large-scale mining landslide incident. The findings establish safety leadership as a systems phenomenon, and furthermore, demonstrate the usefulness of applying systems-thinking methods to learn from incidents in terms of what 'went right'. Implications, including future research directions, are discussed.

It Takes an Eco-System: A Review of the Research Administration Technology Landscape

ERIC Educational Resources Information Center

Saas, Tyler; Kemp, James

2017-01-01

Deloitte Consulting LLP conducted a review of publicly available data sources with the goal of identifying the pre- and post-award systems used in higher education. The number and type of pre- and post-award systems identified not only show that higher education institutions (HEIs) use a variety of methods to facilitate research activities, but…

Characterization of Adolescent Prescription Drug Abuse and Misuse Using the Researched Abuse Diversion and Addiction-Related Surveillance (RADARS[R]) System

ERIC Educational Resources Information Center

Zosel, Amy; Bartelson, Becki Bucher; Bailey, Elise; Lowenstein, Steven; Dart, Rick

2013-01-01

Objective: To describe the characteristics and health effects of adolescent (age 13-19 years) prescription drug abuse and misuse using the Researched Abuse Diversion and Addiction-Related Surveillance (RADARS[R])) System. Method: Secondary analysis of data collected from RADARS System participating poison centers was performed. Data for all…

A Coding System for Qualitative Studies of the Information-Seeking Process in Computer Science Research

ERIC Educational Resources Information Center

Moral, Cristian; de Antonio, Angelica; Ferre, Xavier; Lara, Graciela

2015-01-01

Introduction: In this article we propose a qualitative analysis tool--a coding system--that can support the formalisation of the information-seeking process in a specific field: research in computer science. Method: In order to elaborate the coding system, we have conducted a set of qualitative studies, more specifically a focus group and some…

Fuzzy System-Based Target Selection for a NIR Camera-Based Gaze Tracker

PubMed Central

Naqvi, Rizwan Ali; Arsalan, Muhammad; Park, Kang Ryoung

2017-01-01

Gaze-based interaction (GBI) techniques have been a popular subject of research in the last few decades. Among other applications, GBI can be used by persons with disabilities to perform everyday tasks, as a game interface, and can play a pivotal role in the human computer interface (HCI) field. While gaze tracking systems have shown high accuracy in GBI, detecting a user’s gaze for target selection is a challenging problem that needs to be considered while using a gaze detection system. Past research has used the blinking of the eyes for this purpose as well as dwell time-based methods, but these techniques are either inconvenient for the user or requires a long time for target selection. Therefore, in this paper, we propose a method for fuzzy system-based target selection for near-infrared (NIR) camera-based gaze trackers. The results of experiments performed in addition to tests of the usability and on-screen keyboard use of the proposed method show that it is better than previous methods. PMID:28420114

Data-Driven Approach To Determine Popular Proteins for Targeted Proteomics Translation of Six Organ Systems.

PubMed

Lam, Maggie P Y; Venkatraman, Vidya; Xing, Yi; Lau, Edward; Cao, Quan; Ng, Dominic C M; Su, Andrew I; Ge, Junbo; Van Eyk, Jennifer E; Ping, Peipei

2016-11-04

Amidst the proteomes of human tissues lie subsets of proteins that are closely involved in conserved pathophysiological processes. Much of biomedical research concerns interrogating disease signature proteins and defining their roles in disease mechanisms. With advances in proteomics technologies, it is now feasible to develop targeted proteomics assays that can accurately quantify protein abundance as well as their post-translational modifications; however, with rapidly accumulating number of studies implicating proteins in diseases, current resources are insufficient to target every protein without judiciously prioritizing the proteins with high significance and impact for assay development. We describe here a data science method to prioritize and expedite assay development on high-impact proteins across research fields by leveraging the biomedical literature record to rank and normalize proteins that are popularly and preferentially published by biomedical researchers. We demonstrate this method by finding priority proteins across six major physiological systems (cardiovascular, cerebral, hepatic, renal, pulmonary, and intestinal). The described method is data-driven and builds upon the collective knowledge of previous publications referenced on PubMed to lend objectivity to target selection. The method and resulting popular protein lists may also be useful for exploring biological processes associated with various physiological systems and research topics, in addition to benefiting ongoing efforts to facilitate the broad translation of proteomics technologies.

A brief overview of NASA Langley's research program in formal methods

NASA Technical Reports Server (NTRS)

1992-01-01

An overview of NASA Langley's research program in formal methods is presented. The major goal of this work is to bring formal methods technology to a sufficiently mature level for use by the United States aerospace industry. Towards this goal, work is underway to design and formally verify a fault-tolerant computing platform suitable for advanced flight control applications. Also, several direct technology transfer efforts have been initiated that apply formal methods to critical subsystems of real aerospace computer systems. The research team consists of six NASA civil servants and contractors from Boeing Military Aircraft Company, Computational Logic Inc., Odyssey Research Associates, SRI International, University of California at Davis, and Vigyan Inc.

Electronic Data Collection Options for Practice-Based Research Networks

PubMed Central

Pace, Wilson D.; Staton, Elizabeth W.

2005-01-01

PURPOSE We wanted to describe the potential benefits and problems associated with selected electronic methods of collecting data within practice-based research networks (PBRNs). METHODS We considered a literature review, discussions with PBRN researchers, industry information, and personal experience. This article presents examples of selected PBRNs’ use of electronic data collection. RESULTS Collecting research data in the geographically dispersed PBRN environment requires considerable coordination to ensure completeness, accuracy, and timely transmission of the data, as well as a limited burden on the participants. Electronic data collection, particularly at the point of care, offers some potential solutions. Electronic systems allow use of transparent decision algorithms and improved data entry and data integrity. These systems may improve data transfer to the central office as well as tracking systems for monitoring study progress. PBRNs have available to them a wide variety of electronic data collection options, including notebook computers, tablet PCs, personal digital assistants (PDAs), and browser-based systems that operate independent of or over the Internet. Tablet PCs appear particularly advantageous for direct patient data collection in an office environment. PDAs work well for collecting defined data elements at the point of care. Internet-based systems work well for data collection that can be completed after the patient visit, as most primary care offices do not support Internet connectivity in examination rooms. CONCLUSIONS When planning to collect data electronically, it is important to match the electronic data collection method to the study design. Focusing an inappropriate electronic data collection method onto users can interfere with accurate data gathering and may also anger PBRN members. PMID:15928215

Advances in spatial epidemiology and geographic information systems.

PubMed

Kirby, Russell S; Delmelle, Eric; Eberth, Jan M

2017-01-01

The field of spatial epidemiology has evolved rapidly in the past 2 decades. This study serves as a brief introduction to spatial epidemiology and the use of geographic information systems in applied research in epidemiology. We highlight technical developments and highlight opportunities to apply spatial analytic methods in epidemiologic research, focusing on methodologies involving geocoding, distance estimation, residential mobility, record linkage and data integration, spatial and spatio-temporal clustering, small area estimation, and Bayesian applications to disease mapping. The articles included in this issue incorporate many of these methods into their study designs and analytical frameworks. It is our hope that these studies will spur further development and utilization of spatial analysis and geographic information systems in epidemiologic research. Copyright © 2016 Elsevier Inc. All rights reserved.

A graphical weather system design for the NASA transport systems research vehicle B-737

NASA Technical Reports Server (NTRS)

Scanlon, Charles H.

1992-01-01

A graphical weather system was designed for testing in the NASA Transport Systems Research Vehicle B-737 airplane and simulator. The purpose of these tests was to measure the impact of graphical weather products on aircrew decision processes, weather situation awareness, reroute clearances, workload, and weather monitoring. The flight crew graphical weather interface is described along with integration of the weather system with the flight navigation system, and data link transmission methods for sending weather data to the airplane.

Workflow Agents vs. Expert Systems: Problem Solving Methods in Work Systems Design

NASA Technical Reports Server (NTRS)

Clancey, William J.; Sierhuis, Maarten; Seah, Chin

2009-01-01

During the 1980s, a community of artificial intelligence researchers became interested in formalizing problem solving methods as part of an effort called "second generation expert systems" (2nd GES). How do the motivations and results of this research relate to building tools for the workplace today? We provide an historical review of how the theory of expertise has developed, a progress report on a tool for designing and implementing model-based automation (Brahms), and a concrete example how we apply 2nd GES concepts today in an agent-based system for space flight operations (OCAMS). Brahms incorporates an ontology for modeling work practices, what people are doing in the course of a day, characterized as "activities." OCAMS was developed using a simulation-to-implementation methodology, in which a prototype tool was embedded in a simulation of future work practices. OCAMS uses model-based methods to interactively plan its actions and keep track of the work to be done. The problem solving methods of practice are interactive, employing reasoning for and through action in the real world. Analogously, it is as if a medical expert system were charged not just with interpreting culture results, but actually interacting with a patient. Our perspective shifts from building a "problem solving" (expert) system to building an actor in the world. The reusable components in work system designs include entire "problem solvers" (e.g., a planning subsystem), interoperability frameworks, and workflow agents that use and revise models dynamically in a network of people and tools. Consequently, the research focus shifts so "problem solving methods" include ways of knowing that models do not fit the world, and ways of interacting with other agents and people to gain or verify information and (ultimately) adapt rules and procedures to resolve problematic situations.

Structure, function and five basic needs of the global health research system

PubMed Central

Rudan, Igor; Sridhar, Devi

2016-01-01

Background Two major initiatives that were set up to support and co–ordinate global health research efforts have been largely discontinued in recent years: the Global Forum for Health Research and World Health Organization's Department for Research Policy and Cooperation. These developments provide an interesting case study into the factors that contribute to the sustainability of initiatives to support and co–ordinate global health research in the 21st century. Methods We reviewed the history of attempts to govern, support or co–ordinate research in global health. Moreover, we studied the changes and shifts in funding flows attributed to global health research. This allowed us to map the structure of the global health research system, as it has evolved under the increased funding contributions of the past decade. Bearing in mind its structure, core functions and dynamic nature, we proposed a framework on how to effectively support the system to increase its efficiency. Results Based on our framework, which charted the structure and function of the global health research system and exposed places and roles for many stakeholders within the system, five basic needs emerged: (i) to co–ordinate funding among donors more effectively; (ii) to prioritize among many research ideas; (iii) to quickly recognize results of successful research; (iv) to ensure broad and rapid dissemination of results and their accessibility; and (v) to evaluate return on investments in health research. Conclusion The global health research system has evolved rapidly and spontaneously. It has not been optimally efficient, but it is possible to identify solutions that could improve this. There are already examples of effective responses for the need of prioritization of research questions (eg, the CHNRI method), quick recognition of important research (eg, systems used by editors of the leading journals) and rapid and broadly accessible publication of the new knowledge (eg, PLoS One journal as an example). It is still necessary to develop tools that could assist donors to co–ordinate funding and ensure more equity between areas in the provided support, and to evaluate the value for money invested in health research. PMID:26401270

The use of qualitative methods in developing the descriptive systems of preference-based measures of health-related quality of life for use in economic evaluation.

PubMed

Stevens, Katherine; Palfreyman, Simon

2012-12-01

To describe how qualitative methods can be used in the development of descriptive systems of preference-based measures (PBMs) of health-related quality of life. The requirements of the National Institute for Health and Clinical Excellence and other agencies together with the increasing use of patient-reported outcome measures has led to an increase in the demand for PBMs. Recently, interest has grown in developing new PBMs and while previous research on PBMs has mainly focused on the methods of valuation, research into the methods of developing descriptive systems is an emerging field. Traditionally, descriptive systems of PBMs were developed by using top-down methods, where content was derived from existing measures, the literature, or health surveys. A contrasting approach is a bottom-up methodology, which takes the views of patients or laypeople on how their life is affected by their health. This approach generally requires the use of qualitative methods. Qualitative methods lend themselves well to the development of PBMs. They also ensure that the measure has appropriate language, content validity, and responsiveness to change. While the use of qualitative methods in the development of non-PBMs is fairly standard, their use in developing PBMs was until recently nonexistent. In this article, we illustrate the use of qualitative methods by presenting two case studies of recently developed PBMs, one generic and one condition specific. We outline the stages involved, discuss the strengths and weaknesses of the approach, and compare with the top-down approach used in the majority of PBMs to date. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Foundations of Space Biology and Medicine. Volume 3: Space Medicine and Biotechnology

NASA Technical Reports Server (NTRS)

Calvin, M. (Editor); Gazenko, O. G. (Editor)

1975-01-01

The results of medical and biological research in space are presented. Specific topics discussed include: methods of providing life support systems for astronauts, characteristics of integrated life support systems, protection against adverse factors of space flight, selection and training of astronauts, and future space biomedical research.

Leadership Development Model for Shelby County Schools

ERIC Educational Resources Information Center

Cobia, F. Jane; Smith, Elizabeth F.; Wood, Leah Anne

2016-01-01

The purpose of this study was to examine factors impacting program quality in leadership development programs as a means to inform the Shelby County School System of effective practices in leadership development. The qualitative research design method was used to explore two school systems identified through a comprehensive review of research as…

Evaluation of Models of the Reading Process.

ERIC Educational Resources Information Center

Balajthy, Ernest

A variety of reading process models have been proposed and evaluated in reading research. Traditional approaches to model evaluation specify the workings of a system in a simplified fashion to enable organized, systematic study of the system's components. Following are several statistical methods of model evaluation: (1) empirical research on…

USDA Agricultural Research Service creates Nutrient Uptake and Outcome Network (NUOnet)

USDA-ARS?s Scientific Manuscript database

One of the national goals of USDA-ARS is to conduct research that develops new practices and methods to increase agricultural production and quality with sustainable systems that have a lower environmental impact. When completed, the new NUOnet database system will be able to help in the establishme...

Automated on-line fecal detection - digital eye guards against fecal contamination

USDA-ARS?s Scientific Manuscript database

Agricultural Research Service scientists in Athens, GA., have been granted a patent on a method to detect contaminants on food surfaces with imaging systems. Using a real-time imaging system in the processing plant, researchers Bob Windham, Kurt, Lawrence, Bosoon Park, and Doug Smith in the ARS Poul...

Large space antenna communications systems: Integrated Langley Research Center/Jet Propulsion Laboratory development activities. 2: Langley Research Center activities

NASA Technical Reports Server (NTRS)

Cambell, T. G.; Bailey, M. C.; Cockrell, C. R.; Beck, F. B.

1983-01-01

The electromagnetic analysis activities at the Langley Research Center are resulting in efficient and accurate analytical methods for predicting both far- and near-field radiation characteristics of large offset multiple-beam multiple-aperture mesh reflector antennas. The utilization of aperture integration augmented with Geometrical Theory of Diffraction in analyzing the large reflector antenna system is emphasized.

Remote control system for high-perfomance computer simulation of crystal growth by the PFC method

NASA Astrophysics Data System (ADS)

Pavlyuk, Evgeny; Starodumov, Ilya; Osipov, Sergei

2017-04-01

Modeling of crystallization process by the phase field crystal method (PFC) - one of the important directions of modern computational materials science. In this paper, the practical side of the computer simulation of the crystallization process by the PFC method is investigated. To solve problems using this method, it is necessary to use high-performance computing clusters, data storage systems and other often expensive complex computer systems. Access to such resources is often limited, unstable and accompanied by various administrative problems. In addition, the variety of software and settings of different computing clusters sometimes does not allow researchers to use unified program code. There is a need to adapt the program code for each configuration of the computer complex. The practical experience of the authors has shown that the creation of a special control system for computing with the possibility of remote use can greatly simplify the implementation of simulations and increase the performance of scientific research. In current paper we show the principal idea of such a system and justify its efficiency.

Analysis of methods. [information systems evolution environment

NASA Technical Reports Server (NTRS)

Mayer, Richard J. (Editor); Ackley, Keith A.; Wells, M. Sue; Mayer, Paula S. D.; Blinn, Thomas M.; Decker, Louis P.; Toland, Joel A.; Crump, J. Wesley; Menzel, Christopher P.; Bodenmiller, Charles A.

1991-01-01

Information is one of an organization's most important assets. For this reason the development and maintenance of an integrated information system environment is one of the most important functions within a large organization. The Integrated Information Systems Evolution Environment (IISEE) project has as one of its primary goals a computerized solution to the difficulties involved in the development of integrated information systems. To develop such an environment a thorough understanding of the enterprise's information needs and requirements is of paramount importance. This document is the current release of the research performed by the Integrated Development Support Environment (IDSE) Research Team in support of the IISEE project. Research indicates that an integral part of any information system environment would be multiple modeling methods to support the management of the organization's information. Automated tool support for these methods is necessary to facilitate their use in an integrated environment. An integrated environment makes it necessary to maintain an integrated database which contains the different kinds of models developed under the various methodologies. In addition, to speed the process of development of models, a procedure or technique is needed to allow automatic translation from one methodology's representation to another while maintaining the integrity of both. The purpose for the analysis of the modeling methods included in this document is to examine these methods with the goal being to include them in an integrated development support environment. To accomplish this and to develop a method for allowing intra-methodology and inter-methodology model element reuse, a thorough understanding of multiple modeling methodologies is necessary. Currently the IDSE Research Team is investigating the family of Integrated Computer Aided Manufacturing (ICAM) DEFinition (IDEF) languages IDEF(0), IDEF(1), and IDEF(1x), as well as ENALIM, Entity Relationship, Data Flow Diagrams, and Structure Charts, for inclusion in an integrated development support environment.

Implementation Of Haversine Formula And Best First Search Method In Searching Of Tsunami Evacuation Route

NASA Astrophysics Data System (ADS)

Anisya; Yoga Swara, Ganda

2017-12-01

Padang is one of the cities prone to earthquake disaster with tsunami due to its position at the meeting of two active plates, this is, a source of potentially powerful earthquake and tsunami. Central government and most offices are located in the red zone (vulnerable areas), it will also affect the evacuation of the population during the earthquake and tsunami disaster. In this study, researchers produced a system of search nearest shelter using best-first-search method. This method uses the heuristic function, the amount of cost taken and the estimated value or travel time, path length and population density. To calculate the length of the path, researchers used method of haversine formula. The value obtained from the calculation process is implemented on a web-based system. Some alternative paths and some of the closest shelters will be displayed in the system.

On Everhart Method

NASA Astrophysics Data System (ADS)

Pârv, Bazil

This paper deals with the Everhart numerical integration method, a well-known method in astronomical research. This method, a single-step one, is widely used for numerical integration of motion equation of celestial bodies. For an integration step, this method uses unequally-spaced substeps, defined by the roots of the so-called generating polynomial of Everhart's method. For this polynomial, this paper proposes and proves new recurrence formulae. The Maple computer algebra system was used to find and prove these formulae. Again, Maple seems to be well suited and easy to use in mathematical research.

The Use of Tools, Modelling Methods, Data Types, and Endpoints in Systems Medicine: A Survey on Projects of the German e:Med-Programme.

PubMed

Gietzelt, Matthias; Höfer, Thomas; Knaup-Gregori, Petra; König, Rainer; Löpprich, Martin; Poos, Alexandra; Ganzinger, Matthias

2016-01-01

Systems medicine is the consequent continuation of research efforts on the road to an individualized medicine. Thereby, systems medicine tries to offer a holistic view on the patient by combining different data sources to highlight different perspectives on the patient's health. Our research question was to identify the main data types, modelling methods, analysis tools, and endpoints currently used and studied in systems medicine. Therefore, we conducted a survey on projects with a systems medicine background. Fifty participants completed this survey. The results of the survey were analyzed using histograms and cross tables, and finally compared to results of a former literature review with the same research focus. The data types reported in this survey were widely diversified. As expected, genomic and phenotype data were used most frequently. In contrast, environmental and behavioral data were rarely used in the projects. Overall, the cross tables of the data types in the survey and the literature review showed overlapping results.

What’s in a game? A systems approach to enhancing performance analysis in football

PubMed Central

2017-01-01

Purpose Performance analysis (PA) in football is considered to be an integral component of understanding the requirements for optimal performance. Despite vast amounts of research in this area key gaps remain, including what comprises PA in football, and methods to minimise research-practitioner gaps. The aim of this study was to develop a model of the football match system in order to better describe and understand the components of football performance. Such a model could inform the design of new PA methods. Method Eight elite level football Subject Method Experts (SME’s) participated in two workshops to develop a systems model of the football match system. The model was developed using a first-of-its-kind application of Cognitive Work Analysis (CWA) in football. CWA has been used in many other non-sporting domains to analyse and understand complex systems. Result Using CWA, a model of the football match ‘system’ was developed. The model enabled identification of several PA measures not currently utilised, including communication between team members, adaptability of teams, playing at the appropriate tempo, as well as attacking and defending related measures. Conclusion The results indicate that football is characteristic of a complex sociotechnical system, and revealed potential new and unique PA measures regarded as important by SME’s, yet not currently measured. Importantly, these results have identified a gap between the current PA research and the information that is meaningful to football coaches and practitioners. PMID:28212392

Investigation of the Utilization of Modern Industrial Methods, Processes, Ergonomics, and the Internet in the Scientific Environment

NASA Technical Reports Server (NTRS)

Myer, Spencer S., Jr.

2005-01-01

On Oct. 1, 2001 Cleveland State University and NASA Glenn Research Center embarked on the above named cooperative agreement. Because NASA's research facilities often exhibit instances where the failure to use state-of-the-art technologies and methods to improve on outmoded systems of interface and control, and this runs contrary to the NASA philosophy of "faster, better, and cheaper", it was deemed an ideal opportunity for this collaboration. The main objectives of the proposed effort were to research and investigate the use of the latest technologies, methods, techniques, etc. which pertain to control and interface with industrial and research systems and facilities. The work was done in large part at NASA Glenn Research Center, using selected research facilities as real-world laboratories; such as certain Microgravity Science Division and Space Station projects. Microgravity Science Division at Glenn Research Center designs and builds experiments to be flown on the Space Shuttle and eventually on the International Space Station. Economy of space, weight, complexity, data storage, ergonomics, and many other factors present problems that also exist in industry. Many of the solutions can come from the same areas of study mentioned above.

The Gibbs Variational Method in Thermodynamics of Equilibrium Plasma: 1. General Conditions of Equilibrium and Stability for One-Component Charged Gas

DTIC Science & Technology

2018-04-01

systems containing ionized gases. 2. Gibbs Method in the Integral Form As per the Gibbs general methodology , based on the concept of heterogeneous...ARL-TR-8348 ● APR 2018 US Army Research Laboratory The Gibbs Variational Method in Thermodynamics of Equilibrium Plasma: 1...ARL-TR-8348 ● APR 2018 US Army Research Laboratory The Gibbs Variational Method in Thermodynamics of Equilibrium Plasma: 1. General

Testing Methods for Challenging the National Wetland Plant List: Using Tsuga canadensis (L.) Carr. (Eastern Hemlock) as a Case Study

DTIC Science & Technology

2017-07-01

ESRI (Nature Conservancy and Environmental Systems Research Institute). 1994. Field Methods . In Field Methods for Vegetation Mapping: United States...ER D C/ CR RE L TR -1 7- 9 Wetlands Regulatory Assistance Program (WRAP) Testing Methods for Challenging the National Wetland Plant List...Robert W. Lichvar and Jennifer J. Goulet July 2017 Approved for public release; distribution is unlimited. The U.S. Army Engineer Research

Quality Improvement Analysis of the Air Force Aircraft Maintenance and Munitions Officers Course

DTIC Science & Technology

1994-09-01

participant. 82nd Training Group, Sheppard AFB, TX. Personal communications, 10 August. Bryman , A. 1989. Research methods and organizational studies...1991. Business research methods . Boston, MA: Richard D. Irwin, Inc. Frisbee, G.J. 1988. A study of the technical versus administrative orientation of...the stakeholders of the system. Qualitative research can provide a perspective that many quantitative methodologies cannot ( Bryman , 1989: 139- 141

System Maturity and Architecture Assessment Methods, Processes, and Tools

DTIC Science & Technology

2012-03-02

Deshmukh , and M. Sarfaraz. Development of Systems Engineering Maturity Models and Management Tools. Systems Engineering Research Center Final Technical...Ramirez- Marquez, D. Nowicki, A. Deshmukh , and M. Sarfaraz. Development of Systems Engineering Maturity Models and Management Tools. Systems Engineering

The improvement of autism spectrum disorders on children communication ability with PECS method Multimedia Augmented Reality-Based

NASA Astrophysics Data System (ADS)

Taryadi; Kurniawan, I.

2018-01-01

This research was done to examine the usage of PECS method (Picture Exchange Communication System) multimedia augmented reality based as a learning alternative in training the communication of autism childen. The aim of this research were developing an approach to improve the communication ability before and after an intervension with PECS multimedia augmented reality method. The subject of this research were 12 autism children in Inclusion school in Pekalongan region. The experiment method was used with the single subject research approach. The research resulted that the average ability level in communication before and after the treatment has shown 47% while during the treatment the average level is 65%. Whereas there is an improvement after intervension stage with the average of 76%..

Automation in an addiction treatment research clinic: computerised contingency management, ecological momentary assessment and a protocol workflow system.

PubMed

Vahabzadeh, Massoud; Lin, Jia-Ling; Mezghanni, Mustapha; Epstein, David H; Preston, Kenzie L

2009-01-01

A challenge in treatment research is the necessity of adhering to protocol and regulatory strictures while maintaining flexibility to meet patients' treatment needs and to accommodate variations among protocols. Another challenge is the acquisition of large amounts of data in an occasionally hectic environment, along with the provision of seamless methods for exporting, mining and querying the data. We have automated several major functions of our outpatient treatment research clinic for studies in drug abuse and dependence. Here we describe three such specialised applications: the Automated Contingency Management (ACM) system for the delivery of behavioural interventions, the transactional electronic diary (TED) system for the management of behavioural assessments and the Protocol Workflow System (PWS) for computerised workflow automation and guidance of each participant's daily clinic activities. These modules are integrated into our larger information system to enable data sharing in real time among authorised staff. ACM and the TED have each permitted us to conduct research that was not previously possible. In addition, the time to data analysis at the end of each study is substantially shorter. With the implementation of the PWS, we have been able to manage a research clinic with an 80 patient capacity, having an annual average of 18,000 patient visits and 7300 urine collections with a research staff of five. Finally, automated data management has considerably enhanced our ability to monitor and summarise participant safety data for research oversight. When developed in consultation with end users, automation in treatment research clinics can enable more efficient operations, better communication among staff and expansions in research methods.

Complex multidisciplinary system composition for aerospace vehicle conceptual design

NASA Astrophysics Data System (ADS)

Gonzalez, Lex

Although, there exists a vast amount of work concerning the analysis, design, integration of aerospace vehicle systems, there is no standard for how this data and knowledge should be combined in order to create a synthesis system. Each institution creating a synthesis system has in house vehicle and hardware components they are attempting to model and proprietary methods with which to model them. This leads to the fact that synthesis systems begin as one-off creations meant to answer a specific problem. As the scope of the synthesis system grows to encompass more and more problems, so does its size and complexity; in order for a single synthesis system to answer multiple questions the number of methods and method interface must increase. As a means to curtail the requirement that the increase of an aircraft synthesis systems capability leads to an increase in its size and complexity, this research effort focuses on the idea that each problem in aerospace requires its own analysis framework. By focusing on the creation of a methodology which centers on the matching of an analysis framework towards the problem being solved, the complexity of the analysis framework is decoupled from the complexity of the system that creates it. The derived methodology allows for the composition of complex multi-disciplinary systems (CMDS) through the automatic creation and implementation of system and disciplinary method interfaces. The CMDS Composition process follows a four step methodology meant to take a problem definition and progress towards the creation of an analysis framework meant to answer said problem. The unique implementation of the CMDS Composition process take user selected disciplinary analysis methods and automatically integrates them, together in order to create a syntactically composable analysis framework. As a means of assessing the validity of the CMDS Composition process a prototype system (AVDDBMS) has been developed. AVD DBMS has been used to model the Generic Hypersonic Vehicle (GHV), an open source family of hypersonic vehicles originating from the Air Force Research Laboratory. AVDDBMS has been applied in three different ways in order to assess its validity: Verification using GHV disciplinary data, Validation using selected disciplinary analysis methods, and Application of the CMDS Composition Process to assess the design solution space for the GHV hardware. The research demonstrates the holistic effect that selection of individual disciplinary analysis methods has on the structure and integration of the analysis framework.

Empirical research in service engineering based on AHP and fuzzy methods

NASA Astrophysics Data System (ADS)

Zhang, Yanrui; Cao, Wenfu; Zhang, Lina

2015-12-01

Recent years, management consulting industry has been rapidly developing worldwide. Taking a big management consulting company as research object, this paper established an index system of service quality of consulting, based on customer satisfaction survey, evaluated service quality of the consulting company by AHP and fuzzy comprehensive evaluation methods.

Automated Test Case Generator for Phishing Prevention Using Generative Grammars and Discriminative Methods

ERIC Educational Resources Information Center

Palka, Sean

2015-01-01

This research details a methodology designed for creating content in support of various phishing prevention tasks including live exercises and detection algorithm research. Our system uses probabilistic context-free grammars (PCFG) and variable interpolation as part of a multi-pass method to create diverse and consistent phishing email content on…

An improved method for collecting and monitoring pine oleoresin

Treesearch

Dick Karsky; Brian Strom; Harold Thistle

2004-01-01

A new method for collecting and monitoring pine oleoresin has been developed through a cooperative project involving the Missoula Technology Development Center (MTDC), Southern Research Station (Brian Strom, research entomologist), and the Forest Health Technology Enterprise Team. The new sampling unit (figure 1) is cast from rugged plastic. It provides a closed system...

Fourth NASA Langley Formal Methods Workshop

NASA Technical Reports Server (NTRS)

Holloway, C. Michael (Compiler); Hayhurst, Kelly J. (Compiler)

1997-01-01

This publication consists of papers presented at NASA Langley Research Center's fourth workshop on the application of formal methods to the design and verification of life-critical systems. Topic considered include: Proving properties of accident; modeling and validating SAFER in VDM-SL; requirement analysis of real-time control systems using PVS; a tabular language for system design; automated deductive verification of parallel systems. Also included is a fundamental hardware design in PVS.

Dissemination, Implementation, and Improvement Science Research in Population Health: Opportunities for Public Health and CTSAs.

PubMed

Kuo, Tony; Gase, Lauren N; Inkelas, Moira

2015-12-01

The complex, dynamic nature of health systems requires dissemination, implementation, and improvement (DII) sciences to effectively translate emerging knowledge into practice. Although they hold great promise for informing multisector policies and system-level changes, these methods are often not strategically used by public health. More than 120 stakeholders from Southern California, including the community, federal and local government, university, and health services were convened to identify key priorities and opportunities for public health departments and Clinical and Translational Science Awards programs (CTSAs) to advance DII sciences in population health. Participants identified challenges (mismatch of practice realities with narrowly focused research questions; lack of iterative learning) and solutions (using methods that fit the dynamic nature of the real world; aligning theories of change across sectors) for applying DII science research to public health problems. Pragmatic steps that public health and CTSAs can take to facilitate DII science research include: employing appropriate study designs; training scientists and practicing professionals in these methods; securing resources to advance this work; and supporting team science to solve complex-systems issues. Public health and CTSAs represent a unique model of practice for advancing DII research in population health. The partnership can inform policy and program development in local communities. © 2015 Wiley Periodicals, Inc.

Sounding the warning bells: the need for a systems approach to understanding behaviour at rail level crossings.

PubMed

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G

2013-09-01

Collisions at rail level crossings are an international safety concern and have been the subject of considerable research effort. Modern human factors practice advocates a systems approach to investigating safety issues in complex systems. This paper describes the results of a structured review of the level crossing literature to determine the extent to which a systems approach has been applied. The measures used to determine if previous research was underpinned by a systems approach were: the type of analysis method utilised, the number of component relationships considered, the number of user groups considered, the number of system levels considered and the type of model described in the research. None of research reviewed was found to be consistent with a systems approach. It is recommended that further research utilise a systems approach to the study of the level crossing system to enable the identification of effective design improvements. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Standardized Methods for Electronic Shearography

NASA Technical Reports Server (NTRS)

Lansing, Matthew D.

1997-01-01

Research was conducted in development of operating procedures and standard methods to evaluate fiber reinforced composite materials, bonded or sprayed insulation, coatings, and laminated structures with MSFC electronic shearography systems. Optimal operating procedures were developed for the Pratt and Whitney Electronic Holography/Shearography Inspection System (EH/SIS) operating in shearography mode, as well as the Laser Technology, Inc. (LTI) SC-4000 and Ettemeyer SHS-94 ISTRA shearography systems. Operating practices for exciting the components being inspected were studied, including optimal methods for transient heating with heat lamps and other methods as appropriate to enhance inspection capability.

Developing Learning Tool of Control System Engineering Using Matrix Laboratory Software Oriented on Industrial Needs

NASA Astrophysics Data System (ADS)

Isnur Haryudo, Subuh; Imam Agung, Achmad; Firmansyah, Rifqi

2018-04-01

The purpose of this research is to develop learning media of control technique using Matrix Laboratory software with industry requirement approach. Learning media serves as a tool for creating a better and effective teaching and learning situation because it can accelerate the learning process in order to enhance the quality of learning. Control Techniques using Matrix Laboratory software can enlarge the interest and attention of students, with real experience and can grow independent attitude. This research design refers to the use of research and development (R & D) methods that have been modified by multi-disciplinary team-based researchers. This research used Computer based learning method consisting of computer and Matrix Laboratory software which was integrated with props. Matrix Laboratory has the ability to visualize the theory and analysis of the Control System which is an integration of computing, visualization and programming which is easy to use. The result of this instructional media development is to use mathematical equations using Matrix Laboratory software on control system application with DC motor plant and PID (Proportional-Integral-Derivative). Considering that manufacturing in the field of Distributed Control systems (DCSs), Programmable Controllers (PLCs), and Microcontrollers (MCUs) use PID systems in production processes are widely used in industry.

The Idea to Promote the Development of E-Government in the Civil Aviation System

NASA Astrophysics Data System (ADS)

Renliang, Jiang

E-government has a significant impact on the organizational structure, working mechanism, operating methods and behavior patterns of the civil aviation administration department.The purpose of this research is to find some countermeasures propelling the electronization, network and office automation of the civil aviation system.The method used in the study was field and literature research.The studies showed that government departments in the civil aviation system could promote the development of e-government further by promoting open administration and implementing democratic and scientific decision-making, strengthening the popularization of information technology and information technology training on civil servants, paying attention to the integration and sharing of information resources, formulating a standard e-government system for the civil aviation system, developing the legal security system for the e-government and strengthening the network security.

Linguistic Alternatives to Quantitative Research Strategies. Part One: How Linguistic Mechanisms Advance Research Outcomes

ERIC Educational Resources Information Center

Yeager, Joseph; Sommer, Linda

2007-01-01

Combining psycholinguistic technologies and systems analysis created advances in motivational profiling and numerous new behavioral engineering applications. These advances leapfrog many mainstream statistical research methods, producing superior research results via cause-effect language mechanisms. Entire industries explore motives ranging from…

Access to Essential Medicines in Pakistan: Policy and Health Systems Research Concerns

PubMed Central

Zaidi, Shehla; Bigdeli, Maryam; Aleem, Noureen; Rashidian, Arash

2013-01-01

Introduction Inadequate access to essential medicines is a common issue within developing countries. Policy response is constrained, amongst other factors, by a dearth of in-depth country level evidence. We share here i) gaps related to access to essential medicine in Pakistan; and ii) prioritization of emerging policy and research concerns. Methods An exploratory research was carried out using a health systems perspective and applying the WHO Framework for Equitable Access to Essential Medicine. Methods involved key informant interviews with policy makers, providers, industry, NGOs, experts and development partners, review of published and grey literature, and consultative prioritization in stakeholder’s Roundtable. Findings A synthesis of evidence found major gaps in essential medicine access in Pakistan driven by weaknesses in the health care system as well as weak pharmaceutical regulation. 7 major policy concerns and 11 emerging research concerns were identified through consultative Roundtable. These related to weaknesses in medicine registration and quality assurance systems, unclear and counterproductive pricing policies, irrational prescribing and sub-optimal drug availability. Available research, both locally and globally, fails to target most of the identified policy concerns, tending to concentrate on irrational prescriptions. It overlooks trans-disciplinary areas of policy effectiveness surveillance, consumer behavior, operational pilots and pricing interventions review. Conclusion Experience from Pakistan shows that policy concerns related to essential medicine access need integrated responses across various components of the health systems, are poorly addressed by existing evidence, and require an expanded health systems research agenda. PMID:23717442

Multiple triangulation and collaborative research using qualitative methods to explore decision making in pre-hospital emergency care.

PubMed

Johnson, Maxine; O'Hara, Rachel; Hirst, Enid; Weyman, Andrew; Turner, Janette; Mason, Suzanne; Quinn, Tom; Shewan, Jane; Siriwardena, A Niroshan

2017-01-24

Paramedics make important and increasingly complex decisions at scene about patient care. Patient safety implications of influences on decision making in the pre-hospital setting were previously under-researched. Cutting edge perspectives advocate exploring the whole system rather than individual influences on patient safety. Ethnography (the study of people and cultures) has been acknowledged as a suitable method for identifying health care issues as they occur within the natural context. In this paper we compare multiple methods used in a multi-site, qualitative study that aimed to identify system influences on decision making. The study was conducted in three NHS Ambulance Trusts in England and involved researchers from each Trust working alongside academic researchers. Exploratory interviews with key informants e.g. managers (n = 16) and document review provided contextual information. Between October 2012 and July 2013 researchers observed 34 paramedic shifts and ten paramedics provided additional accounts via audio-recorded 'digital diaries' (155 events). Three staff focus groups (total n = 21) and three service user focus groups (total n = 23) explored a range of experiences and perceptions. Data collection and analysis was carried out by academic and ambulance service researchers as well as service users. Workshops were held at each site to elicit feedback on the findings and facilitate prioritisation of issues identified. The use of a multi-method qualitative approach allowed cross-validation of important issues for ambulance service staff and service users. A key factor in successful implementation of the study was establishing good working relationships with academic and ambulance service teams. Enrolling at least one research lead at each site facilitated the recruitment process as well as study progress. Active involvement with the study allowed ambulance service researchers and service users to gain a better understanding of the research process. Feedback workshops allowed stakeholders to discuss and prioritise findings as well as identify new research areas. Combining multiple qualitative methods with a collaborative research approach can facilitate exploration of system influences on patient safety in under-researched settings. The paper highlights empirical issues, strengths and limitations for this approach. Feedback workshops were effective for verifying findings and prioritising areas for future intervention and research.

Comparison between visible/ NIR spectroscopy and hyperspectral imaging for detecting surface contaminants on poultry carcasses

USDA-ARS?s Scientific Manuscript database

The U. S. Department of Agriculture, Agricultural Research Service has been developing a method and system to detect fecal contamination on processed poultry carcasses with hyperspectral and multispectral imaging systems. The patented method utilizes a three step approach to contaminant detection. S...

ORE's GENeric Evaluation SYStem: GENESYS 1988-89.

ERIC Educational Resources Information Center

Baenen, Nancy; And Others

GENESYS--GENeric Evaluation SYStem--is a method of streamlining data collection and evaluation through the use of computer technology. GENESYS has allowed the Office of Research and Evaluation (ORE) of the Austin (Texas) Independent School District to evaluate a multitude of contrasting programs with limited resources. By standardizing methods and…

Theoretical and computational foundations of management class simulation

Treesearch

Denie Gerold

1978-01-01

Investigations on complicated, complex, and not well-ordered systems are possible only with the aid of mathematical methods and electronic data processing. Simulation as a method of operations research is particularly suitable for this purpose. Theoretical and computational foundations of management class simulation must be integrated into the planning systems of...

Controlled Ecological Life Support System: Regenerative Life Support Systems in Space

NASA Technical Reports Server (NTRS)

Macelroy, Robert D.; Smernoff, David T.

1987-01-01

A wide range of topics related to the extended support of humans in space are covered. Overviews of research conducted in Japan, Europe, and the U.S. are presented. The methods and technologies required to recycle materials, especially respiratory gases, within a closed system are examined. Also presented are issues related to plant and algal productivity, efficiency, and processing methods. Computer simulation of closed systems, discussions of radiation effects on systems stability, and modeling of a computer bioregenerative system are also covered.

Assigning Resources to Health Care Use for Health Services Research: Options and Consequences

PubMed Central

Fishman, Paul A.; Hornbrook, Mark C.

2013-01-01

Aims Our goals are threefold: 1) to review the leading options for assigning resource coefficients to health services utilization; 2) to discuss the relative advantages of each option; and, 3) provide examples where the research question had marked implications for the choice of which resource measure to employ. Methods Three approaches have been used to establish relative resource weights in health services research: a) direct estimation of production costs through micro-costing or step down allocation methods; b) macro-costing/regression analysis; and, c) standardized resource assignment. We describe each of these methods and provide examples of how the study question drove the choice of resource use measure. Findings All empirical resource-intensity weighting systems contain distortions that limit their universal application. Hence, users must select the weighting system that matches the needs of their specific analysis. All systems require significant data resources and data processing. However, inattention to the distortions contained in a complex resource weighting system may undermine the validity and generalizability of an economic evaluation. Conclusions Direct estimation of production costs are useful for empirical analyses, but they contain distortions that undermine optimal resource allocation decisions. Researchers must ensure that the data being used meets both the study design and the question being addressed. They also should ensure that the choice of resource measure is the best fit for the analysis. Implications for Research and Policy Researchers should consider which of the available measures is the most appropriate for the question being addressed rather than take ‘cost’ or utilization as a variable over which they have no control PMID:19536002

Consumer Adoption of Personal Health Record Systems: A Self-Determination Theory Perspective

PubMed Central

Assadi, Vahid

2017-01-01

Background Personal Health Records (PHR) systems provide individuals with access and control over their health information and consequently can support individuals in becoming active participants, rather than passive recipients, in their own care process. In spite of numerous benefits suggested for consumers’ utilizing PHR systems, research has shown that such systems are not yet widely adopted or well known to consumers. Bearing in mind the potential benefits of PHRs to consumers and their potential interest in these systems—and that similar to any other type of information system, adoption is a prerequisite for realizing the potential benefits of PHR systems—research is needed to understand how to enhance the adoption rates for PHR systems. Objective This research seeks to understand how individuals’ intentions to adopt PHR systems are affected by their self-determination in managing their own health—the extent of their ability to take an active role in managing their own health. As such, this research aims to develop and empirically validate a theoretical model that explains PHR systems adoption by the general public through the integration of theories from the information systems and psychology literatures. Methods This research employs a cross-sectional survey method targeted at the Canadian general public without any prior experience in using PHR systems. A partial least squares approach to structural equation modeling was used to validate the proposed research model of this study (N=159). Results Individuals with higher levels of ability to manage their own health (self-determination) are more likely to adopt PHR systems since they have more positive perceptions regarding the use of such systems. Further, such self-determination is fueled by autonomy support from consumers’ physicians as well as the consumers’ personality trait of autonomy orientation. Conclusions This study advances our theoretical understanding of PHR systems adoption. It also contributes to practice by providing insightful implications for designing, promoting, and facilitating the use of PHR systems among consumers. PMID:28751301

Knowledge Translation Research: The Science of Moving Research into Policy and Practice

ERIC Educational Resources Information Center

Curran, Janet A.; Grimshaw, Jeremy M.; Hayden, Jill A.; Campbell, Barbara

2011-01-01

Research findings will not change health outcomes unless health care organizations, systems, and professionals adopt them in practice. Knowledge translation research is the scientific study of the methods to promote the uptake of research findings by patients, health care providers, managers, and policy makers. Many forms of enquiry addressing…

Educational Policy Research in New Zealand: Issues and Challenges.

ERIC Educational Resources Information Center

Wagemaker, H.

As exemplified by New Zealand, the nature of educational policy research is shaped by political and social factors that impinge upon the research environment. Following a description of the educational system and research funding methods, this paper analyzes three areas that affect policy research in New Zealand and addresses relevant social…

Scramjet nozzle design and analysis as applied to a highly integrated hypersonic research airplane

NASA Technical Reports Server (NTRS)

Small, W. J.; Weidner, J. P.; Johnston, P. J.

1974-01-01

The configuration and performance of the propulsion system for the hypersonic research vehicle are discussed. A study of the interactions between propulsion and aerodynamics of the highly integrated vehicle was conducted. The hypersonic research vehicle is configured to test the technology of structural and thermal protection systems concepts and the operation of the propulsion system under true flight conditions for most of the hypersonic flight regime. The subjects considered are: (1) research vehicle and scramjet engine configurations to determine fundamental engine sizing constraints, (2) analytical methods for computing airframe and propulsion system components, and (3) characteristics of a candidate nozzle to investigate vehicle stability and acceleration performance.

NASA Langley's Formal Methods Research in Support of the Next Generation Air Transportation System

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Munoz, Cesar A.

2008-01-01

This talk will provide a brief introduction to the formal methods developed at NASA Langley and the National Institute for Aerospace (NIA) for air traffic management applications. NASA Langley's formal methods research supports the Interagency Joint Planning and Development Office (JPDO) effort to define and develop the 2025 Next Generation Air Transportation System (NGATS). The JPDO was created by the passage of the Vision 100 Century of Aviation Reauthorization Act in Dec 2003. The NGATS vision calls for a major transformation of the nation s air transportation system that will enable growth to 3 times the traffic of the current system. The transformation will require an unprecedented level of safety-critical automation used in complex procedural operations based on 4-dimensional (4D) trajectories that enable dynamic reconfiguration of airspace scalable to geographic and temporal demand. The goal of our formal methods research is to provide verification methods that can be used to insure the safety of the NGATS system. Our work has focused on the safety assessment of concepts of operation and fundamental algorithms for conflict detection and resolution (CD&R) and self- spacing in the terminal area. Formal analysis of a concept of operations is a novel area of application of formal methods. Here one must establish that a system concept involving aircraft, pilots, and ground resources is safe. The formal analysis of algorithms is a more traditional endeavor. However, the formal analysis of ATM algorithms involves reasoning about the interaction of algorithmic logic and aircraft trajectories defined over an airspace. These trajectories are described using 2D and 3D vectors and are often constrained by trigonometric relations. Thus, in many cases it has been necessary to unload the full power of an advanced theorem prover. The verification challenge is to establish that the safety-critical algorithms produce valid solutions that are guaranteed to maintain separation under all possible scenarios. Current research has assumed perfect knowledge of the location of other aircraft in the vicinity so absolute guarantees are possible, but increasingly we are relaxing the assumptions to allow incomplete, inaccurate, and/or faulty information from communication sources.

Characterization of the Dynamics of Climate Systems and Identification of Missing Mechanisms Impacting the Long Term Predictive Capabilities of Global Climate Models Utilizing Dynamical Systems Approaches to the Analysis of Observed and Modeled Climate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhatt, Uma S.; Wackerbauer, Renate; Polyakov, Igor V.

The goal of this research was to apply fractional and non-linear analysis techniques in order to develop a more complete characterization of climate change and variability for the oceanic, sea ice and atmospheric components of the Earth System. This research applied two measures of dynamical characteristics of time series, the R/S method of calculating the Hurst exponent and Renyi entropy, to observational and modeled climate data in order to evaluate how well climate models capture the long-term dynamics evident in observations. Fractional diffusion analysis was applied to ARGO ocean buoy data to quantify ocean transport. Self organized maps were appliedmore » to North Pacific sea level pressure and analyzed in ways to improve seasonal predictability for Alaska fire weather. This body of research shows that these methods can be used to evaluate climate models and shed light on climate mechanisms (i.e., understanding why something happens). With further research, these methods show promise for improving seasonal to longer time scale forecasts of climate.« less

Surface transportation : prospects for innovation through research, intelligent transportation systems, state infrastructure banks, and design-build contracting : testimony before the Subcommittee on Transportation and Infrastructure, Committee on Environ

DOT National Transportation Integrated Search

1997-03-06

This testimony describes how innovation in federal research, financing and contracting methods has the potential for improving the performance of the nation's surface transportation system. The testimony is based on three reports on the reauthorizati...

The Role of Computers in Research and Development at Langley Research Center

NASA Technical Reports Server (NTRS)

Wieseman, Carol D. (Compiler)

1994-01-01

This document is a compilation of presentations given at a workshop on the role cf computers in research and development at the Langley Research Center. The objectives of the workshop were to inform the Langley Research Center community of the current software systems and software practices in use at Langley. The workshop was organized in 10 sessions: Software Engineering; Software Engineering Standards, methods, and CASE tools; Solutions of Equations; Automatic Differentiation; Mosaic and the World Wide Web; Graphics and Image Processing; System Design Integration; CAE Tools; Languages; and Advanced Topics.

Research on crude oil storage and transportation based on optimization algorithm

NASA Astrophysics Data System (ADS)

Yuan, Xuhua

2018-04-01

At present, the optimization theory and method have been widely used in the optimization scheduling and optimal operation scheme of complex production systems. Based on C++Builder 6 program development platform, the theoretical research results are implemented by computer. The simulation and intelligent decision system of crude oil storage and transportation inventory scheduling are designed. The system includes modules of project management, data management, graphics processing, simulation of oil depot operation scheme. It can realize the optimization of the scheduling scheme of crude oil storage and transportation system. A multi-point temperature measuring system for monitoring the temperature field of floating roof oil storage tank is developed. The results show that by optimizing operating parameters such as tank operating mode and temperature, the total transportation scheduling costs of the storage and transportation system can be reduced by 9.1%. Therefore, this method can realize safe and stable operation of crude oil storage and transportation system.

Stability improvement of wind turbine penetrated using power system stabilizer (PSS) on South Sulawesi transmission system

NASA Astrophysics Data System (ADS)

Siswanto, Agus; Gunadin, Indar Chaerah; Said, Sri Mawar; Suyuti, Ansar

2018-03-01

The purpose of this research is to improve the stability of interconnection of South Sulawesi system caused by penetration new wind turbine in Sidrap area on bus 2 and in Jeniponto area on bus 34. The method used in this research was via software Power System analysis Toolbox (PSAT) under MATLAB. In this research, there are two problems that are evaluated, the stability of the system before and after penetration wind turbine into the system South Sulawesi system. From the simulation result shows that penetration of wind turbine on bus 2 Sidrap, bus 37 Jeniponto give effect oscillation on the system. The oscillation was damped by installation of Power System Stabilizer (PSS) on bus 29 area Sungguminasa, that South Sulawesi system stable according to normal condition.

Distributed systems status and control

NASA Technical Reports Server (NTRS)

Kreidler, David; Vickers, David

1990-01-01

Concepts are investigated for an automated status and control system for a distributed processing environment. System characteristics, data requirements for health assessment, data acquisition methods, system diagnosis methods and control methods were investigated in an attempt to determine the high-level requirements for a system which can be used to assess the health of a distributed processing system and implement control procedures to maintain an accepted level of health for the system. A potential concept for automated status and control includes the use of expert system techniques to assess the health of the system, detect and diagnose faults, and initiate or recommend actions to correct the faults. Therefore, this research included the investigation of methods by which expert systems were developed for real-time environments and distributed systems. The focus is on the features required by real-time expert systems and the tools available to develop real-time expert systems.

[Optimization of end-tool parameters based on robot hand-eye calibration].

PubMed

Zhang, Lilong; Cao, Tong; Liu, Da

2017-04-01

A new one-time registration method was developed in this research for hand-eye calibration of a surgical robot to simplify the operation process and reduce the preparation time. And a new and practical method is introduced in this research to optimize the end-tool parameters of the surgical robot based on analysis of the error sources in this registration method. In the process with one-time registration method, firstly a marker on the end-tool of the robot was recognized by a fixed binocular camera, and then the orientation and position of the marker were calculated based on the joint parameters of the robot. Secondly the relationship between the camera coordinate system and the robot base coordinate system could be established to complete the hand-eye calibration. Because of manufacturing and assembly errors of robot end-tool, an error equation was established with the transformation matrix between the robot end coordinate system and the robot end-tool coordinate system as the variable. Numerical optimization was employed to optimize end-tool parameters of the robot. The experimental results showed that the one-time registration method could significantly improve the efficiency of the robot hand-eye calibration compared with the existing methods. The parameter optimization method could significantly improve the absolute positioning accuracy of the one-time registration method. The absolute positioning accuracy of the one-time registration method can meet the requirements of the clinical surgery.

A Fabry-Perot interferometric imaging spectrometer in LWIR

NASA Astrophysics Data System (ADS)

Zhang, Fang; Gao, Jiaobo; Wang, Nan; Wu, Jianghui; Meng, Hemin; Zhang, Lei; Gao, Shan

2017-02-01

With applications ranging from the desktop to remote sensing, the long wave infrared (LWIR) interferometric spectral imaging system is always with huge volume and large weight. In order to miniaturize and light the instrument, a new method of LWIR spectral imaging system based on a variable gap Fabry-Perot (FP) interferometer is researched. With the system working principle analyzed, theoretically, it is researched that how to make certain the primary parameter, such as, wedge angle of interferometric cavity, f-number of the imaging lens and the relationship between the wedge angle and the modulation of the interferogram. A prototype is developed and a good experimental result of a uniform radiation source, a monochromatic source, is obtained. The research shows that besides high throughput and high spectral resolution, the advantage of miniaturization is also simultaneously achieved in this method.

Organization of Biomedical Data for Collaborative Scientific Research: A Research Information Management System.

PubMed

Myneni, Sahiti; Patel, Vimla L

2010-06-01

Biomedical researchers often work with massive, detailed and heterogeneous datasets. These datasets raise new challenges of information organization and management for scientific interpretation, as they demand much of the researchers' time and attention. The current study investigated the nature of the problems that researchers face when dealing with such data. Four major problems identified with existing biomedical scientific information management methods were related to data organization, data sharing, collaboration, and publications. Therefore, there is a compelling need to develop an efficient and user-friendly information management system to handle the biomedical research data. This study evaluated the implementation of an information management system, which was introduced as part of the collaborative research to increase scientific productivity in a research laboratory. Laboratory members seemed to exhibit frustration during the implementation process. However, empirical findings revealed that they gained new knowledge and completed specified tasks while working together with the new system. Hence, researchers are urged to persist and persevere when dealing with any new technology, including an information management system in a research laboratory environment.

Translating expert system rules into Ada code with validation and verification

NASA Technical Reports Server (NTRS)

Becker, Lee; Duckworth, R. James; Green, Peter; Michalson, Bill; Gosselin, Dave; Nainani, Krishan; Pease, Adam

1991-01-01

The purpose of this ongoing research and development program is to develop software tools which enable the rapid development, upgrading, and maintenance of embedded real-time artificial intelligence systems. The goals of this phase of the research were to investigate the feasibility of developing software tools which automatically translate expert system rules into Ada code and develop methods for performing validation and verification testing of the resultant expert system. A prototype system was demonstrated which automatically translated rules from an Air Force expert system was demonstrated which detected errors in the execution of the resultant system. The method and prototype tools for converting AI representations into Ada code by converting the rules into Ada code modules and then linking them with an Activation Framework based run-time environment to form an executable load module are discussed. This method is based upon the use of Evidence Flow Graphs which are a data flow representation for intelligent systems. The development of prototype test generation and evaluation software which was used to test the resultant code is discussed. This testing was performed automatically using Monte-Carlo techniques based upon a constraint based description of the required performance for the system.

Research requirements to reduce civil helicopter life cycle cost

NASA Technical Reports Server (NTRS)

Blewitt, S. J.

1978-01-01

The problem of the high cost of helicopter development, production, operation, and maintenance is defined and the cost drivers are identified. Helicopter life cycle costs would decrease by about 17 percent if currently available technology were applied. With advanced technology, a reduction of about 30 percent in helicopter life cycle costs is projected. Technological and managerial deficiencies which contribute to high costs are examined, basic research and development projects which can reduce costs include methods for reduced fuel consumption; improved turbine engines; airframe and engine production methods; safety; rotor systems; and advanced transmission systems.

Research on the attitude of small UAV based on MEMS devices

NASA Astrophysics Data System (ADS)

Shi, Xiaojie; Lu, Libin; Jin, Guodong; Tan, Lining

2017-05-01

This paper mainly introduces the research principle and implementation method of the small UAV navigation attitude system based on MEMS devices. The Gauss - Newton method based on least squares is used to calibrate the MEMS accelerometer and gyroscope for calibration. Improve the accuracy of the attitude by using the modified complementary filtering to correct the attitude angle error. The experimental data show that the design of the attitude and attitude system in this paper to meet the requirements of small UAV attitude accuracy to achieve a small, low cost.

Development of Advanced Life Cycle Costing Methods for Technology Benefit/Cost/Risk Assessment

NASA Technical Reports Server (NTRS)

Yackovetsky, Robert (Technical Monitor)

2002-01-01

The overall objective of this three-year grant is to provide NASA Langley's System Analysis Branch with improved affordability tools and methods based on probabilistic cost assessment techniques. In order to accomplish this objective, the Aerospace Systems Design Laboratory (ASDL) needs to pursue more detailed affordability, technology impact, and risk prediction methods and to demonstrate them on variety of advanced commercial transports. The affordability assessment, which is a cornerstone of ASDL methods, relies on the Aircraft Life Cycle Cost Analysis (ALCCA) program originally developed by NASA Ames Research Center and enhanced by ASDL. This grant proposed to improve ALCCA in support of the project objective by updating the research, design, test, and evaluation cost module, as well as the engine development cost module. Investigations into enhancements to ALCCA include improved engine development cost, process based costing, supportability cost, and system reliability with airline loss of revenue for system downtime. A probabilistic, stand-alone version of ALCCA/FLOPS will also be developed under this grant in order to capture the uncertainty involved in technology assessments. FLOPS (FLight Optimization System program) is an aircraft synthesis and sizing code developed by NASA Langley Research Center. This probabilistic version of the coupled program will be used within a Technology Impact Forecasting (TIF) method to determine what types of technologies would have to be infused in a system in order to meet customer requirements. A probabilistic analysis of the CER's (cost estimating relationships) within ALCCA will also be carried out under this contract in order to gain some insight as to the most influential costs and the impact that code fidelity could have on future RDS (Robust Design Simulation) studies.

Study on Web-Based Tool for Regional Agriculture Industry Structure Optimization Using Ajax

NASA Astrophysics Data System (ADS)

Huang, Xiaodong; Zhu, Yeping

According to the research status of regional agriculture industry structure adjustment information system and the current development of information technology, this paper takes web-based regional agriculture industry structure optimization tool as research target. This paper introduces Ajax technology and related application frameworks to build an auxiliary toolkit of decision support system for agricultural policy maker and economy researcher. The toolkit includes a “one page” style component of regional agriculture industry structure optimization which provides agile arguments setting method that enables applying sensitivity analysis and usage of data and comparative advantage analysis result, and a component that can solve the linear programming model and its dual problem by simplex method.

Qualitative methods in health services and management research: pockets of excellence and progress, but still a long way to go.

PubMed

Devers, Kelly J

2011-02-01

The 10-year systematic review of published health services and management research by Weiner et al. (2011) chronicles the contributions of qualitative methods, highlights areas of substantial progress, and identifies areas in need of more progress. This article (Devers, 2011) discusses possible reasons for lack of progress in some areas--related to the under-supply of well-trained qualitative researchers and more tangible demand for their research--and mechanisms for future improvement. To ensure a robust health services research toolbox, the field must take additional steps to provide stronger education and training in qualitative methods and more funding and publication opportunities. Given the rapidly changing health care system post the passage of national health reform and the chalresearch issues associated with it, the health services research and management field will not meet its future challenges with quantitative methods alone or with a half-empty toolbox.

Analysis about modeling MEC7000 excitation system of nuclear power unit

NASA Astrophysics Data System (ADS)

Liu, Guangshi; Sun, Zhiyuan; Dou, Qian; Liu, Mosi; Zhang, Yihui; Wang, Xiaoming

2018-02-01

Aiming at the importance of accurate modeling excitation system in stability calculation of nuclear power plant inland and lack of research in modeling MEC7000 excitation system,this paper summarize a general method to modeling and simulate MEC7000 excitation system. Among this method also solve the key issues of computing method of IO interface parameter and the conversion process of excitation system measured model to BPA simulation model. At last complete the simulation modeling of MEC7000 excitation system first time in domestic. By used No-load small disturbance check, demonstrates that the proposed model and algorithm is corrective and efficient.

Improved methods for distribution loss evaluation. Volume 1: analytic and evaluative techniques. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flinn, D.G.; Hall, S.; Morris, J.

This volume describes the background research, the application of the proposed loss evaluation techniques, and the results. The research identified present loss calculation methods as appropriate, provided care was taken to represent the various system elements in sufficient detail. The literature search of past methods and typical data revealed that extreme caution in using typical values (load factor, etc.) should be taken to ensure that all factors were referred to the same time base (daily, weekly, etc.). The performance of the method (and computer program) proposed in this project was determined by comparison of results with a rigorous evaluation ofmore » losses on the Salt River Project system. This rigorous evaluation used statistical modeling of the entire system as well as explicit enumeration of all substation and distribution transformers. Further tests were conducted at Public Service Electric and Gas of New Jersey to check the appropriateness of the methods in a northern environment. Finally sensitivity tests indicated data elements inaccuracy of which would most affect the determination of losses using the method developed in this project.« less

Document co-citation analysis to enhance transdisciplinary research

PubMed Central

Trujillo, Caleb M.; Long, Tammy M.

2018-01-01

Specialized and emerging fields of research infrequently cross disciplinary boundaries and would benefit from frameworks, methods, and materials informed by other fields. Document co-citation analysis, a method developed by bibliometric research, is demonstrated as a way to help identify key literature for cross-disciplinary ideas. To illustrate the method in a useful context, we mapped peer-recognized scholarship related to systems thinking. In addition, three procedures for validation of co-citation networks are proposed and implemented. This method may be useful for strategically selecting information that can build consilience about ideas and constructs that are relevant across a range of disciplines. PMID:29308433

Computational Methods for Failure Analysis and Life Prediction

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Harris, Charles E. (Compiler); Housner, Jerrold M. (Compiler); Hopkins, Dale A. (Compiler)

1993-01-01

This conference publication contains the presentations and discussions from the joint UVA/NASA Workshop on Computational Methods for Failure Analysis and Life Prediction held at NASA Langley Research Center 14-15 Oct. 1992. The presentations focused on damage failure and life predictions of polymer-matrix composite structures. They covered some of the research activities at NASA Langley, NASA Lewis, Southwest Research Institute, industry, and universities. Both airframes and propulsion systems were considered.

Smart Extraction and Analysis System for Clinical Research.

PubMed

Afzal, Muhammad; Hussain, Maqbool; Khan, Wajahat Ali; Ali, Taqdir; Jamshed, Arif; Lee, Sungyoung

2017-05-01

With the increasing use of electronic health records (EHRs), there is a growing need to expand the utilization of EHR data to support clinical research. The key challenge in achieving this goal is the unavailability of smart systems and methods to overcome the issue of data preparation, structuring, and sharing for smooth clinical research. We developed a robust analysis system called the smart extraction and analysis system (SEAS) that consists of two subsystems: (1) the information extraction system (IES), for extracting information from clinical documents, and (2) the survival analysis system (SAS), for a descriptive and predictive analysis to compile the survival statistics and predict the future chance of survivability. The IES subsystem is based on a novel permutation-based pattern recognition method that extracts information from unstructured clinical documents. Similarly, the SAS subsystem is based on a classification and regression tree (CART)-based prediction model for survival analysis. SEAS is evaluated and validated on a real-world case study of head and neck cancer. The overall information extraction accuracy of the system for semistructured text is recorded at 99%, while that for unstructured text is 97%. Furthermore, the automated, unstructured information extraction has reduced the average time spent on manual data entry by 75%, without compromising the accuracy of the system. Moreover, around 88% of patients are found in a terminal or dead state for the highest clinical stage of disease (level IV). Similarly, there is an ∼36% probability of a patient being alive if at least one of the lifestyle risk factors was positive. We presented our work on the development of SEAS to replace costly and time-consuming manual methods with smart automatic extraction of information and survival prediction methods. SEAS has reduced the time and energy of human resources spent unnecessarily on manual tasks.

Improving Pedestrian Safety at Signalized Intersections

DOT National Transportation Integrated Search

2012-06-01

Our research investigated methods and technologies to make signalized intersections safer for pedestrians using the capabilities : of accessible pedestrian systems. Our research focused on three technologies: acoustic beaconing, passive pedestrian de...

Validation Methods Research for Fault-Tolerant Avionics and Control Systems Sub-Working Group Meeting. CARE 3 peer review

NASA Technical Reports Server (NTRS)

Trivedi, K. S. (Editor); Clary, J. B. (Editor)

1980-01-01

A computer aided reliability estimation procedure (CARE 3), developed to model the behavior of ultrareliable systems required by flight-critical avionics and control systems, is evaluated. The mathematical models, numerical method, and fault-tolerant architecture modeling requirements are examined, and the testing and characterization procedures are discussed. Recommendations aimed at enhancing CARE 3 are presented; in particular, the need for a better exposition of the method and the user interface is emphasized.

The IS-GEO RCN: Fostering Collaborations for Intelligent Systems Research to Support Geosciences

NASA Astrophysics Data System (ADS)

Gil, Y.; Pierce, S. A.

2016-12-01

Geoscience problems are complex and often involve data that changes across space and time. Frequently geoscience knowledge and understanding provides valuable information and insight for problems related to energy, water, climate, mineral resources, and our understanding of how the Earth evolves through time. Simultaneously, many grand challenges in the geosciences cannot be addressed without the aid of computational support and innovations. Intelligent and Information Systems (IS) research includes a broad range of computational methods and topics such as knowledge representation, information integration, machine learning, robotics, adaptive sensors, and intelligent interfaces. IS research has a very important role to play in accelerating the speed of scientific discovery in geosciences and thus in solving challenges in geosciences. Many aspects of geosciences (GEO) research pose novel open problems for intelligent systems researchers. To develop intelligent systems with sound knowledge of theory and practice, it is important that GEO and IS experts collaborate. The EarthCube Research Coordination Network for Intelligent Systems for Geosciences (IS-GEO RCN) represents an emerging community of interdisciplinary researchers producing fundamental new capabilities for understanding Earth systems. Furthermore, the educational component aims to identify new approaches to teaching students in this new interdisciplinary area, seeking to raise a new generation of scientists that are better able to apply IS methods and tools to geoscience challenges of the future. By providing avenues for IS and GEO researchers to work together, the IS-GEO RCN will serve as both a point of contact, as well as an avenue for educational outreach across the disciplines for the nascent community of research and practice. The initial efforts are focused on connecting the communities in ways that help researchers understand opportunities and challenges that can benefit from IS-GEO collaborations. The IS-GEO RCN will jumpstart interdisciplinary research collaborations in this emerging new area so that progress across both disciplines can be accelerated.

ADP Systems: Examination of Non-Federal Hospital Information Systems.

DTIC Science & Technology

1987-06-30

administrative and business management, and other purposes, such as research . In 1980, we reported1 that integrated hospital information systems evolved...Defense’s (DOD) and Veterans Administration’s (VA) efforts to develop and implement systems for federal hospitals. We used two methods to derive the...integrated in that they supported a variety of hospital activities and a uniform set of data access methods . The hospitals in our survey indicated that

Developing systems interventions in a school setting: an application of community-based participatory research for mental health.

PubMed

Mulvaney-Day, Norah E; Rappaport, Nancy; Alegría, Margarita; Codianne, Leslie M

2006-01-01

The goal of this study was to develop systems interventions in a public school district using community-based participatory research (CBPR) methods to improve the social and academic functioning of children from racial and ethnic minority populations. The study used qualitative methods in the process of problem definition and intervention planning, including in-depth qualitative interviews and stakeholder dialogue groups. The study was conducted at three levels--the school system as a whole, two individual schools, and a multiple-stakeholder participatory group. The study took place in a public school system in an urban city with a population of 101,355 and in two public schools located in this city. The CBPR team included two researchers, a researcher/consulting psychiatrist in the schools, the director of the special education office, her management team, four teachers, and two school-based administrators. The CBPR group engaged in a process of problem definition and intervention planning at all three levels of the system. In addition, both schools initiated systems interventions to target the needs of their school environments. The project led to system interventions at both schools, clarity about the policy constraints to effective collaboration, and increased awareness regarding the behavioral and academic needs of minority children in the schools. The process produced a series of questions to use as a framework in CBPR partnership development. The CBPR approach can expand the scope of mental-health services research, particularly related to services for racial and ethnic minorities.

Pharmacological MRI in animal models: a useful tool for 5-HT research?

PubMed

Martin, Chris; Sibson, Nicola R

2008-11-01

Pharmacological magnetic resonance imaging (phMRI) offers the potential to provide novel insights into the functioning of neurotransmitter systems and drug action in the central nervous system. To date, much of the neuropharmacological research that has applied phMRI techniques has focused on the dopaminergic system with relatively few studies into serotonergic function. In this article, we discuss the current capabilities of, and future potential for phMRI to address fundamental questions in serotonergic research using animal models. Firstly we review existing literature on the application of phMRI to the serotonergic system by exploring 3 broad research themes: (i) the functional anatomy of the serotonergic system; (ii) drug-receptor targeting and distribution; and (iii) disease models and drug development. Subsequently, we discuss the interpretation of phMRI data in terms of neuropharmacological action with a focus on issues specific to neuroimaging studies of the serotonergic system. Unlike other neuroimaging approaches such as positron emission tomography, phMRI methods do not currently offer sensitivity to markers of specific pharmacological action. However, they can provide in vivo markers of the neuropharmacological modulation of neuronal activity across the whole brain with unparalleled spatial and temporal resolution. Furthermore, due to the non-invasive nature of MRI, these markers are readily translatable to human studies. Whilst there are a number of constraints and limitations to phMRI methods that necessitate careful data interpretation, we argue that phMRI could become a valuable research tool in neuropharmacological studies of the serotonergic system.

Validation of Skills, Knowledge and Experience in Lifelong Learning in Europe

ERIC Educational Resources Information Center

Ogunleye, James

2012-01-01

The paper examines systems of validation of skills and experience as well as the main methods/tools currently used for validating skills and knowledge in lifelong learning. The paper uses mixed methods--a case study research and content analysis of European Union policy documents and frameworks--as a basis for this research. The selection of the…

The Value of Qualitative Methods in Social Validity Research

ERIC Educational Resources Information Center

Leko, Melinda M.

2014-01-01

One quality indicator of intervention research is the extent to which the intervention has a high degree of social validity, or practicality. In this study, I drew on Wolf's framework for social validity and used qualitative methods to ascertain five middle schoolteachers' perceptions of the social validity of System 44®--a phonics-based reading…

A Mixed Methods Survey Research Study of Novice Special Education Teachers: Investigation of Reading Preparedness

ERIC Educational Resources Information Center

Stratton, Mary P.

2017-01-01

Novice special education teachers have become an integral part of the public and private school systems throughout Pennsylvania. This mixed-methods research study explored the expertise and preparedness of current novice special education teachers. A combination of an electronic survey questionnaire and phone and face-to-face interviews were…

Comparison AHP and SAW to promotion of head major department SMK Muhammadiyah 04 Medan

NASA Astrophysics Data System (ADS)

Saputra, M.; Sitompul, O. S.; Sihombing, P.

2018-04-01

Decision Support System (DSS) is a system that can help a person to make informed decisions about various types of choices that are performed accurately and in accordance with the desired goals. Many problems can be solved by using decision support systems. In this journal the decision support system is used to assist the Chief of Muhammadiyah Medan branch in the selection of the department chief. The criteria used for the election of department chiefs are: Loyalty, Job Performance, Responsibility, Obedience, Honesty, Cooperation, Education, and Leadership. The selection promotion process consists of Analytical Hierarchy Process (AHP) and Simple Additive Weighting (SAW) methods. The data were obtained through teacher assessment questionnaires by principals and colleagues. The results of this study used a comparison with two decision methods namely SAW method and AHP method so that the decision maker (principal) is more appropriate in the determination of candidates who will be elected head of department at school. The final result of this research is the first rank obtained by muhammad musa with weight value on AHP method (0.274) and weight value on SAW method (0.993), alvin syahrin with weight value on AHP method (0.241) and weight value on SAW method (0.883), noviyanti with weight value on AHP method (0.193) and weight value on SAW method (0.707). So the conclusion on the research that is by using SAW method the value of weight produced more accurate.

[Study on biopharmaceutics classification system for Chinese materia medica of extract of Huanglian].

PubMed

Liu, Yang; Yin, Xiu-Wen; Wang, Zi-Yu; Li, Xue-Lian; Pan, Meng; Li, Yan-Ping; Dong, Ling

2017-11-01

One of the advantages of biopharmaceutics classification system of Chinese materia medica (CMMBCS) is expanding the classification research level from single ingredient to multi-components of Chinese herb, and from multi-components research to holistic research of the Chinese materia medica. In present paper, the alkaloids of extract of huanglian were chosen as the main research object to explore their change rules in solubility and intestinal permeability of single-component and multi-components, and to determine the biopharmaceutical classification of extract of Huanglian from holistic level. The typical shake-flask method and HPLC were used to detect the solubility of single ingredient of alkaloids from extract of huanglian. The quantitative research of alkaloids in intestinal absorption was measured in single-pass intestinal perfusion experiment while permeability coefficient of extract of huanglian was calculated by self-defined weight coefficient method. Copyright© by the Chinese Pharmaceutical Association.

Power control and management of the grid containing largescale wind power systems

NASA Astrophysics Data System (ADS)

Aula, Fadhil Toufick

The ever increasing demand for electricity has driven many countries toward the installation of new generation facilities. However, concerns such as environmental pollution and global warming issues, clean energy sources, high costs associated with installation of new conventional power plants, and fossil fuels depletion have created many interests in finding alternatives to conventional fossil fuels for generating electricity. Wind energy is one of the most rapidly growing renewable power sources and wind power generations have been increasingly demanded as an alternative to the conventional fossil fuels. However, wind power fluctuates due to variation of wind speed. Therefore, large-scale integration of wind energy conversion systems is a threat to the stability and reliability of utility grids containing these systems. They disturb the balance between power generation and consumption, affect the quality of the electricity, and complicate load sharing and load distribution managing and planning. Overall, wind power systems do not help in providing any services such as operating and regulating reserves to the power grid. In order to resolve these issues, research has been conducted in utilizing weather forecasting data to improve the performance of the wind power system, reduce the influence of the fluctuations, and plan power management of the grid containing large-scale wind power systems which consist of doubly-fed induction generator based energy conversion system. The aims of this research, my dissertation, are to provide new methods for: smoothing the output power of the wind power systems and reducing the influence of their fluctuations, power managing and planning of a grid containing these systems and other conventional power plants, and providing a new structure of implementing of latest microprocessor technology for controlling and managing the operation of the wind power system. In this research, in order to reduce and smooth the fluctuations, two methods are presented. The first method is based on a de-loaded technique while the other method is based on utilizing multiple storage facilities. The de-loaded technique is based on characteristics of the power of a wind turbine and estimation of the generated power according to weather forecasting data. The technique provides a reference power by which the wind power system will operate and generate a smooth power. In contrast, utilizing storage facilities will allow the wind power system to operate at its maximum tracking power points' strategy. Two types of energy storages are considered in this research, battery energy storage system (BESS) and pumped-hydropower storage system (PHSS), to suppress the output fluctuations and to support the wind power system to follow the system load demands. Furthermore, this method provides the ability to store energy when there is a surplus of the generated power and to reuse it when there is a shortage of power generation from wind power systems. Both methods are new in terms of utilizing of the techniques and wind speed data. A microprocessor embedded system using an IntelRTM Atom(TM) processor is presented for controlling the wind power system and for providing the remote communication for enhancing the operation of the individual wind power system in a wind farm. The embedded system helps the wind power system to respond and to follow the commands of the central control of the power system. Moreover, it enhances the performance of the wind power system through self-managing, self-functioning, and self-correcting. Finally, a method of system power management and planning is modeled and studied for a grid containing large-scale wind power systems. The method is based on a new technique through constructing a new load demand curve (NLDC) from merging the estimation of generated power from wind power systems and forecasting of the load. To summarize, the methods and their results presented in this dissertation, enhance the operation of the large-scale wind power systems and reduce their drawbacks on the operation of the power grid.

The Incident Command System: a literature review.

PubMed

Jensen, Jessica; Thompson, Steven

2016-01-01

Given the foundational and the fundamental role that the Incident Command System (ICS) is intended to play in on-scene response efforts across the United States, it is important to determine what is known about the system and how this is known. Accordingly, this study addresses the following research question: 'How has research explored the ICS?'. To probe this question, a methodological review of the scant, but widening, pool of research literature directly related to the ICS was conducted. This paper reports on the findings of the analysis related to the focus, theoretical frameworks, population and sampling, methods, results, and conclusions of the existing research literature. While undertaken using different methodological approaches, the ICS research suggests that the system may be limited in its usefulness. In addition, the paper discusses the implications of the research for the state of knowledge of the system and for the direction of future research. © 2016 The Author(s). Disasters © Overseas Development Institute, 2016.

System For Research On Multiple-Arm Robots

NASA Technical Reports Server (NTRS)

Backes, Paul G.; Hayati, Samad; Tso, Kam S.; Hayward, Vincent

1991-01-01

Kali system of computer programs and equipment provides environment for research on distributed programming and distributed control of coordinated-multiple-arm robots. Suitable for telerobotics research involving sensing and execution of low level tasks. Software and configuration of hardware designed flexible so system modified easily to test various concepts in control and programming of robots, including multiple-arm control, redundant-arm control, shared control, traded control, force control, force/position hybrid control, design and integration of sensors, teleoperation, task-space description and control, methods of adaptive control, control of flexible arms, and human factors.

[Methods in health services research. The example of the evaluation of the German disease management programmes].

PubMed

Morfeld, M; Wirtz, M

2006-02-01

According to the established definition of Pfaff, health services research analyses patients' path through the institutions of the health care system. The focus is on development, evaluation and implementation of innovative measures of health care. By increasing its quality health services research strives for an improvement of efficacy and efficiency of the health care system. In order to allow for an appropriate evaluation it is essential to differentiate between structure, process and outcome quality referring to (1) the health care system in its entirety, (2) specific health care units as well as (3) processes of communication in different settings. Health services research comprises a large array of scientific disciplines like public health, medicine, social sciences and social care. For the purpose of managing its tasks adequately a special combination of instruments and methodological procedures is needed. Thus, diverse techniques of evaluation research as well as special requirements for study designs and assessment procedures are of vital importance. The example of the German disease management programmes illustrates the methodical requirements for a scientific evaluation.

Wrestlers' minimal weight: anthropometry, bioimpedance, and hydrostatic weighing compared.

PubMed

Oppliger, R A; Nielsen, D H; Vance, C G

1991-02-01

The need for accurate assessment of minimal wrestling weight among interscholastic wrestlers has been well documented. Previous research has demonstrated the validity of anthropometric methods for this purpose, but little research has examined the validity of bioelectrical impedance (BIA) measurements. Comparisons between BIA systems has received limited attention. With these two objectives, we compared the prediction of minimal weight (MW) among 57 interscholastic wrestlers using three anthropometric methods (skinfolds (SF) and two skeletal dimensions equations) and three BIA systems (Berkeley Medical Research (BMR), RJL, and Valhalla (VAL]. All methods showed high correlations (r values greater than 0.92) with hydrostatic weighting (HW) and between methods (r values greater than 0.90). The standard errors of estimate (SEE) were relatively small for all methods, especially for SF and the three BIA systems (SEE less than 0.70 kg). The total errors of prediction (E) for RJL and VAL (E = 4.4 and 3.9 kg) were significantly larger than observed nonsignificant BMR and SF values (E = 2.3 and 1.8 kg, respectively). Significant mean differences were observed between HW, RJL, VAL, and the two skeletal dimensions equations, but nonsignificant differences were observed between HW, BMR, and SF. BMR differed significantly from the RJL and VAL systems. The results suggest that RJL and VAL have potential application for this subpopulation. Prediction equation refinement with the addition of selected anthropometric measurement or moderating variables may enhance their utility. However, within the scope of our study, SF and BMR BIA appear to be the most valid methods for determining MW in interscholastic wrestlers.

Approaching Etuaptmumk – introducing a consensus-based mixed method for health services research

PubMed Central

Chatwood, Susan; Paulette, Francois; Baker, Ross; Eriksen, Astrid; Hansen, Ketil Lenert; Eriksen, Heidi; Hiratsuka, Vanessa; Lavoie, Josée; Lou, Wendy; Mauro, Ian; Orbinski, James; Pabrum, Nathalie; Retallack, Hanna; Brown, Adalsteinn

2015-01-01

With the recognized need for health systems’ improvements in the circumpolar and indigenous context, there has been a call to expand the research agenda across all sectors influencing wellness and to recognize academic and indigenous knowledge through the research process. Despite being recognized as a distinct body of knowledge in international forums and across indigenous groups, examples of methods and theories based on indigenous knowledge are not well documented in academic texts or peer-reviewed literature on health systems. This paper describes the use of a consensus-based, mixed method with indigenous knowledge by an experienced group of researchers and indigenous knowledge holders who collaborated on a study that explored indigenous values underlying health systems stewardship. The method is built on the principles of Etuaptmumk or two-eyed seeing, which aim to respond to and resolve the inherent conflicts between indigenous ways of knowing and the scientific inquiry that informs the evidence base in health care. Mixed methods’ frameworks appear to provide a framing suitable for research questions that require data from indigenous knowledge sources and western knowledge. The nominal consensus method, as a western paradigm, was found to be responsive to embedding of indigenous knowledge and allowed space to express multiple perspectives and reach consensus on the question at hand. Further utilization and critical evaluation of this mixed methodology with indigenous knowledge are required. PMID:26004427

48 CFR 2415.605-70 - Unsolicited research proposals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Unsolicited research... URBAN DEVELOPMENT CONTRACTING METHODS AND CONTRACTING TYPES CONTRACTING BY NEGOTIATION Source Selection 2415.605-70 Unsolicited research proposals. FAR subpart 15.6 outlines the policies and procedures...

Challenges associated with performing environmental research on titanium dioxide nanoparticles in aquatic environments

EPA Science Inventory

There are challenges associated with performing research on titanium dioxide NPs in aquatic environments particularly marine systems. A critical focus for current titanium dioxide NP research in aquatic environments needs to be on optimizing methods for differentiating naturally...

Test method research on weakening interface strength of steel - concrete under cyclic loading

NASA Astrophysics Data System (ADS)

Liu, Ming-wei; Zhang, Fang-hua; Su, Guang-quan

2018-02-01

The mechanical properties of steel - concrete interface under cyclic loading are the key factors affecting the rule of horizontal load transfer, the calculation of bearing capacity and cumulative horizontal deformation. Cyclic shear test is an effective method to study the strength reduction of steel - concrete interface. A test system composed of large repeated direct shear test instrument, hydraulic servo system, data acquisition system, test control software system and so on is independently designed, and a set of test method, including the specimen preparation, the instrument preparation, the loading method and so on, is put forward. By listing a set of test results, the validity of the test method is verified. The test system and the test method based on it provide a reference for the experimental study on mechanical properties of steel - concrete interface.

Organization of Biomedical Data for Collaborative Scientific Research: A Research Information Management System

PubMed Central

Myneni, Sahiti; Patel, Vimla L.

2010-01-01

Biomedical researchers often work with massive, detailed and heterogeneous datasets. These datasets raise new challenges of information organization and management for scientific interpretation, as they demand much of the researchers’ time and attention. The current study investigated the nature of the problems that researchers face when dealing with such data. Four major problems identified with existing biomedical scientific information management methods were related to data organization, data sharing, collaboration, and publications. Therefore, there is a compelling need to develop an efficient and user-friendly information management system to handle the biomedical research data. This study evaluated the implementation of an information management system, which was introduced as part of the collaborative research to increase scientific productivity in a research laboratory. Laboratory members seemed to exhibit frustration during the implementation process. However, empirical findings revealed that they gained new knowledge and completed specified tasks while working together with the new system. Hence, researchers are urged to persist and persevere when dealing with any new technology, including an information management system in a research laboratory environment. PMID:20543892

Current HPLC Methods for Assay of Nano Drug Delivery Systems.

PubMed

Tekkeli, Serife Evrim Kepekci; Kiziltas, Mustafa Volkan

2017-01-01

In nano drug formulations the mechanism of release is a critical process to recognize controlled and targeted drug delivery systems. In order to gain high bioavailability and specificity from the drug to reach its therapeutic goal, the active substance must be loaded into the nanoparticles efficiently. Therefore, the amount in biological fluids or tissues and the remaining amount in nano carriers are very important parameters to understand the potential of the nano drug delivery systems. For this aim, suitable and validated quantitation methods are required to determine released drug concentrations from nano pharmaceutical formulations. HPLC (High Performance Liquid Chromatography) is one of the most common techniques used for determination of released drug content out of nano drug formulations, in different physical conditions, over different periods of time. Since there are many types of HPLC methods depending on detector and column types, it is a challenge for the researchers to choose a suitable method that is simple, fast and validated HPLC techniques for their nano drug delivery systems. This review's goal is to compare HPLC methods that are currently used in different nano drug delivery systems in order to provide detailed and useful information for researchers. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Automation in an Addiction Treatment Research Clinic: Computerized Contingency Management, Ecological Momentary Assessment, and a Protocol Workflow System

PubMed Central

Vahabzadeh, Massoud; Lin, Jia-Ling; Mezghanni, Mustapha; Epstein, David H.; Preston, Kenzie L.

2009-01-01

Issues A challenge in treatment research is the necessity of adhering to protocol and regulatory strictures while maintaining flexibility to meet patients’ treatment needs and accommodate variations among protocols. Another challenge is the acquisition of large amounts of data in an occasionally hectic environment, along with provision of seamless methods for exporting, mining, and querying the data. Approach We have automated several major functions of our outpatient treatment research clinic for studies in drug abuse and dependence. Here we describe three such specialized applications: the Automated Contingency Management (ACM) system for delivery of behavioral interventions, the Transactional Electronic Diary (TED) system for management of behavioral assessments, and the Protocol Workflow System (PWS) for computerized workflow automation and guidance of each participant’s daily clinic activities. These modules are integrated into our larger information system to enable data sharing in real time among authorized staff. Key Findings ACM and TED have each permitted us to conduct research that was not previously possible. In addition, the time to data analysis at the end of each study is substantially shorter. With the implementation of the PWS, we have been able to manage a research clinic with an 80-patient capacity having an annual average of 18,000 patient-visits and 7,300 urine collections with a research staff of five. Finally, automated data management has considerably enhanced our ability to monitor and summarize participant-safety data for research oversight. Implications and conclusion When developed in consultation with end users, automation in treatment-research clinics can enable more efficient operations, better communication among staff, and expansions in research methods. PMID:19320669

Evidence-based practice for mere mortals: the role of informatics and health services research.

PubMed

Sim, Ida; Sanders, Gillian D; McDonald, Kathryn M

2002-04-01

The poor translation of evidence into practice is a well-known problem. Hopes are high that information technology can help make evidence-based practice feasible for mere mortal physicians. In this paper, we draw upon the methods and perspectives of clinical practice, medical informatics, and health services research to analyze the gap between evidence and action, and to argue that computing systems for bridging this gap should incorporate both informatics and health services research expertise. We discuss 2 illustrative systems--trial banks and a web-based system to develop and disseminate evidence-based guidelines (alchemist)--and conclude with a research and training agenda.

Routinely collected data as a strategic resource for research: priorities for methods and workforce.

PubMed

Jorm, Louisa

2015-09-30

In the era of 'big data', research using routinely collected data offers greater potential than ever before to drive health system effectiveness and efficiency, and population health improvement. In Australia, the policy environment, and emerging frameworks and processes for data governance and access, increasingly support the use of routinely collected data for research. Capitalising on this strategic resource requires investment in both research methods and research workforce. Priorities for methods development include validation studies, techniques for analysing complex longitudinal data, exploration of bias introduced through linkage error, and a robust toolkit to evaluate policies and programs using 'natural experiments'. Priorities for workforce development include broadening the skills base of the existing research workforce, and the formation of new, larger, interdisciplinary research teams to incorporate capabilities in computer science, partnership research, research translation and the 'business' aspects of research. Large-scale, long-term partnership approaches involving government, industry and researchers offer the most promising way to maximise returns on investment in research using routinely collected data.

Cost estimating methods for advanced space systems

NASA Technical Reports Server (NTRS)

Cyr, Kelley

1988-01-01

The development of parametric cost estimating methods for advanced space systems in the conceptual design phase is discussed. The process of identifying variables which drive cost and the relationship between weight and cost are discussed. A theoretical model of cost is developed and tested using a historical data base of research and development projects.

Testing Method for External Cladding Systems - Incerc Romania

NASA Astrophysics Data System (ADS)

Simion, A.; Dragne, H.

2017-06-01

This research presents a new testing method in a natural scale for external cladding systems tested on buildings with minimum than 3 floors [1]. The testing method is unique in Romania and it is similar about many fire testing current methods from European Union states. Also, presents the fire propagation and the effect of fire smoke on the building façade composed of thermal insulation. Laboratory of testing and research for building fire safety from National Institute INCERC Bucharest, provides a test method for determining the fire performance characteristics of non-loadbearing external cladding systems and external wall insulation systems when applied to the face of a building and exposed to an external fire under controlled conditions [2]. The fire exposure is representative of an external fire source or a fully-developed (post-flashover) fire in a room, venting through an opening such as a window aperture that exposes the cladding to the effects of external flames, or an external fire source. On the future, fire tests will be experimented for answer demande a number of high-profile fires where the external facade of tall buildings provided a route for vertical fire spread.

Geometrically Constructed Markov Chain Monte Carlo Study of Quantum Spin-phonon Complex Systems

NASA Astrophysics Data System (ADS)

Suwa, Hidemaro

2013-03-01

We have developed novel Monte Carlo methods for precisely calculating quantum spin-boson models and investigated the critical phenomena of the spin-Peierls systems. Three significant methods are presented. The first is a new optimization algorithm of the Markov chain transition kernel based on the geometric weight allocation. This algorithm, for the first time, satisfies the total balance generally without imposing the detailed balance and always minimizes the average rejection rate, being better than the Metropolis algorithm. The second is the extension of the worm (directed-loop) algorithm to non-conserved particles, which cannot be treated efficiently by the conventional methods. The third is the combination with the level spectroscopy. Proposing a new gap estimator, we are successful in eliminating the systematic error of the conventional moment method. Then we have elucidated the phase diagram and the universality class of the one-dimensional XXZ spin-Peierls system. The criticality is totally consistent with the J1 -J2 model, an effective model in the antiadiabatic limit. Through this research, we have succeeded in investigating the critical phenomena of the effectively frustrated quantum spin system by the quantum Monte Carlo method without the negative sign. JSPS Postdoctoral Fellow for Research Abroad

Generalizing Gillespie’s Direct Method to Enable Network-Free Simulations

DOE PAGES

Suderman, Ryan T.; Mitra, Eshan David; Lin, Yen Ting; ...

2018-03-28

Gillespie’s direct method for stochastic simulation of chemical kinetics is a staple of computational systems biology research. However, the algorithm requires explicit enumeration of all reactions and all chemical species that may arise in the system. In many cases, this is not feasible due to the combinatorial explosion of reactions and species in biological networks. Rule-based modeling frameworks provide a way to exactly represent networks containing such combinatorial complexity, and generalizations of Gillespie’s direct method have been developed as simulation engines for rule-based modeling languages. Here, we provide both a high-level description of the algorithms underlying the simulation engines, termedmore » network-free simulation algorithms, and how they have been applied in systems biology research. We also define a generic rule-based modeling framework and describe a number of technical details required for adapting Gillespie’s direct method for network-free simulation. Lastly, we briefly discuss potential avenues for advancing network-free simulation and the role they continue to play in modeling dynamical systems in biology.« less

Participatory interaction design in user requirements specification in healthcare.

PubMed

Martikainen, Susanna; Ikävalko, Pauliina; Korpela, Mikko

2010-01-01

Healthcare information systems are accused of poor usability even in the popular media in Finland. Doctors especially have been very critical and actively expressed their opinions in public. User involvement and user-centered design methods are seen as the key solution to usability problems. In this paper we describe a research case where participatory methods were experimented within healthcare information systems development in medicinal care in a hospital. The study was part of a larger research project on Activity-driven Information Systems Development in healthcare. The study started by finding out about and modeling the present state of medicinal care in the hospital. After that it was important to define and model the goal state. The goal state, facilitated by the would-be software package, was modeled with the help of user interface drawings as one way of prototyping. Traditional usability methods were extended during the study. According to the health professionals' feedback, the use of participatory and user-centered interaction design methods, particularly user interface drawings enabled them to describe their requirements and create common understanding with the system developers.

Generalizing Gillespie’s Direct Method to Enable Network-Free Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suderman, Ryan T.; Mitra, Eshan David; Lin, Yen Ting

Gillespie’s direct method for stochastic simulation of chemical kinetics is a staple of computational systems biology research. However, the algorithm requires explicit enumeration of all reactions and all chemical species that may arise in the system. In many cases, this is not feasible due to the combinatorial explosion of reactions and species in biological networks. Rule-based modeling frameworks provide a way to exactly represent networks containing such combinatorial complexity, and generalizations of Gillespie’s direct method have been developed as simulation engines for rule-based modeling languages. Here, we provide both a high-level description of the algorithms underlying the simulation engines, termedmore » network-free simulation algorithms, and how they have been applied in systems biology research. We also define a generic rule-based modeling framework and describe a number of technical details required for adapting Gillespie’s direct method for network-free simulation. Lastly, we briefly discuss potential avenues for advancing network-free simulation and the role they continue to play in modeling dynamical systems in biology.« less

Uncovering the essential links in online commercial networks

NASA Astrophysics Data System (ADS)

Zeng, Wei; Fang, Meiling; Shao, Junming; Shang, Mingsheng

2016-09-01

Recommender systems are designed to effectively support individuals' decision-making process on various web sites. It can be naturally represented by a user-object bipartite network, where a link indicates that a user has collected an object. Recently, research on the information backbone has attracted researchers' interests, which is a sub-network with fewer nodes and links but carrying most of the relevant information. With the backbone, a system can generate satisfactory recommenda- tions while saving much computing resource. In this paper, we propose an enhanced topology-aware method to extract the information backbone in the bipartite network mainly based on the information of neighboring users and objects. Our backbone extraction method enables the recommender systems achieve more than 90% of the accuracy of the top-L recommendation, however, consuming only 20% links. The experimental results show that our method outperforms the alternative backbone extraction methods. Moreover, the structure of the information backbone is studied in detail. Finally, we highlight that the information backbone is one of the most important properties of the bipartite network, with which one can significantly improve the efficiency of the recommender system.

Restructurable Controls

NASA Technical Reports Server (NTRS)

Montoya, R. J. (Compiler); Howell, W. E. (Compiler); Bundick, W. T. (Compiler); Ostroff, A. J. (Compiler); Hueschen, R. M. (Compiler); Belcastro, C. M. (Compiler)

1983-01-01

Restructurable control system theory, robust reconfiguration for high reliability and survivability for advanced aircraft, restructurable controls problem definition and research, experimentation, system identification methods applied to aircraft, a self-repairing digital flight control system, and state-of-the-art theory application are addressed.

PREFACE: Advanced many-body and statistical methods in mesoscopic systems

NASA Astrophysics Data System (ADS)

Anghel, Dragos Victor; Sabin Delion, Doru; Sorin Paraoanu, Gheorghe

2012-02-01

It has increasingly been realized in recent times that the borders separating various subfields of physics are largely artificial. This is the case for nanoscale physics, physics of lower-dimensional systems and nuclear physics, where the advanced techniques of many-body theory developed in recent times could provide a unifying framework for these disciplines under the general name of mesoscopic physics. Other fields, such as quantum optics and quantum information, are increasingly using related methods. The 6-day conference 'Advanced many-body and statistical methods in mesoscopic systems' that took place in Constanta, Romania, between 27 June and 2 July 2011 was, we believe, a successful attempt at bridging an impressive list of topical research areas: foundations of quantum physics, equilibrium and non-equilibrium quantum statistics/fractional statistics, quantum transport, phases and phase transitions in mesoscopic systems/superfluidity and superconductivity, quantum electromechanical systems, quantum dissipation, dephasing, noise and decoherence, quantum information, spin systems and their dynamics, fundamental symmetries in mesoscopic systems, phase transitions, exactly solvable methods for mesoscopic systems, various extension of the random phase approximation, open quantum systems, clustering, decay and fission modes and systematic versus random behaviour of nuclear spectra. This event brought together participants from seventeen countries and five continents. Each of the participants brought considerable expertise in his/her field of research and, at the same time, was exposed to the newest results and methods coming from the other, seemingly remote, disciplines. The talks touched on subjects that are at the forefront of topical research areas and we hope that the resulting cross-fertilization of ideas will lead to new, interesting results from which everybody will benefit. We are grateful for the financial and organizational support from IFIN-HH, Ovidius University (where the conference took place), the Academy of Romanian Scientists and the Romanian National Authority for Scientific Research. This conference proceedings volume brings together some of the invited and contributed talks of the conference. The hope of the editors is that they will constitute reference material for applying many-body techniques to problems in mesoscopic and nuclear physics. We thank all the participants for their contribution to the success of this conference. D V Anghel and D S Delion IFIN-HH, Bucharest, Romania G S Paraoanu Aalto University, Finland Conference photograph

Exploring Techniques for Vision Based Human Activity Recognition: Methods, Systems, and Evaluation

PubMed Central

Xu, Xin; Tang, Jinshan; Zhang, Xiaolong; Liu, Xiaoming; Zhang, Hong; Qiu, Yimin

2013-01-01

With the wide applications of vision based intelligent systems, image and video analysis technologies have attracted the attention of researchers in the computer vision field. In image and video analysis, human activity recognition is an important research direction. By interpreting and understanding human activities, we can recognize and predict the occurrence of crimes and help the police or other agencies react immediately. In the past, a large number of papers have been published on human activity recognition in video and image sequences. In this paper, we provide a comprehensive survey of the recent development of the techniques, including methods, systems, and quantitative evaluation of the performance of human activity recognition. PMID:23353144

Overcoming structural constraints to patient utilization of electronic medical records: a critical review and proposal for an evaluation framework.

PubMed

Winkelman, Warren J; Leonard, Kevin J

2004-01-01

There are constraints embedded in medical record structure that limit use by patients in self-directed disease management. Through systematic review of the literature from a critical perspective, four characteristics that either enhance or mitigate the influence of medical record structure on patient utilization of an electronic patient record (EPR) system have been identified: environmental pressures, physician centeredness, collaborative organizational culture, and patient centeredness. An evaluation framework is proposed for use when considering adaptation of existing EPR systems for online patient access. Exemplars of patient-accessible EPR systems from the literature are evaluated utilizing the framework. From this study, it appears that traditional information system research and development methods may not wholly capture many pertinent social issues that arise when expanding access of EPR systems to patients. Critically rooted methods such as action research can directly inform development strategies so that these systems may positively influence health outcomes.

Transportation Network Topologies

NASA Technical Reports Server (NTRS)

Alexandrov, Natalia (Editor)

2004-01-01

The existing U.S. hub-and-spoke air transportation system is reaching saturation. Major aspects of the current system, such as capacity, safety, mobility, customer satisfaction, security, communications, and ecological effects, require improvements. The changing dynamics - increased presence of general aviation, unmanned autonomous vehicles, military aircraft in civil airspace as part of homeland defense - contributes to growing complexity of airspace. The system has proven remarkably resistant to change. NASA Langley Research Center and the National Institute of Aerospace conducted a workshop on Transportation Network Topologies on 9-10 December 2003 in Williamsburg, Virginia. The workshop aimed to examine the feasibility of traditional methods for complex system analysis and design as well as potential novel alternatives in application to transportation systems, identify state-of-the-art models and methods, conduct gap analysis, and thus to lay a foundation for establishing a focused research program in complex systems applied to air transportation.

2 CFR 200.87 - Research and Development (R&D).

Code of Federal Regulations, 2014 CFR

2014-01-01

.... “Research” is defined as a systematic study directed toward fuller scientific knowledge or understanding of... research directed toward the production of useful materials, devices, systems, or methods, including design...

A Flexible and Integrated System for the Remote Acquisition of Neuropsychological Data in Stroke Research

PubMed Central

Durisko, Corrine; McCue, Michael; Doyle, Patrick J.; Dickey, Michael Walsh

2016-01-01

Abstract Background: Neuropsychological testing is a central aspect of stroke research because it provides critical information about the cognitive-behavioral status of stroke survivors, as well as the diagnosis and treatment of stroke-related disorders. Standard neuropsychological methods rely upon face-to-face interactions between a patient and researcher, which creates geographic and logistical barriers that impede research progress and treatment advances. Introduction: To overcome these barriers, we created a flexible and integrated system for the remote acquisition of neuropsychological data (RAND). The system we developed has a secure architecture that permits collaborative videoconferencing. The system supports shared audiovisual feeds that can provide continuous virtual interaction between a participant and researcher throughout a testing session. Shared presentation and computing controls can be used to deliver auditory and visual test items adapted from standard face-to-face materials or execute computer-based assessments. Spoken and manual responses can be acquired, and the components of the session can be recorded for offline data analysis. Materials and Methods: To evaluate its feasibility, our RAND system was used to administer a speech-language test battery to 16 stroke survivors with a variety of communication, sensory, and motor impairments. The sessions were initiated virtually without prior face-to-face instruction in the RAND technology or test battery. Results: Neuropsychological data were successfully acquired from all participants, including those with limited technology experience, and those with a communication, sensory, or motor impairment. Furthermore, participants indicated a high level of satisfaction with the RAND system and the remote assessment that it permits. Conclusions: The results indicate the feasibility of using the RAND system for virtual home-based neuropsychological assessment without prior face-to-face contact between a participant and researcher. Because our RAND system architecture uses off-the-shelf technology and software, it can be duplicated without specialized expertise or equipment. In sum, our RAND system offers a readily available and promising alternative to face-to-face neuropsychological assessment in stroke research. PMID:27214198

A scoping review of research on the prescribing practice of Canadian pharmacists

PubMed Central

Faruquee, Chowdhury Farhana; Guirguis, Lisa M.

2015-01-01

Background: Pharmacists in Canada have been prescribing since 2007. This review aims to explore the volume, array and nature of research activity on Canadian pharmacist prescribing and to identify gaps in the existing literature. Methods: We conducted a scoping review to examine the literature on prescribing by pharmacists in Canada according to methodological trends, research areas and key findings. We searched for peer-reviewed research articles and abstracts in the Ovid MEDLINE, Ovid EMBASE and International Pharmaceutical Abstracts databases without any date limitations. A standardized form was used to extract information. Results: We identified 156 articles; of these, 26 articles and 12 abstracts met inclusion criteria. One-half of the research studies (20) used quantitative methods, including surveys, trials and experimental designs; 11 studies used qualitative methods and 7 used other methods. Research on pharmacist prescribing demonstrated an improvement in patient outcomes (13 studies), varied stakeholder perceptions (10 studies) and factors that influence this practice change (11 studies). Pharmacist prescribing was adopted when pharmacists practised patient-centred care. Stakeholders held contrasting perceptions of pharmacist prescribing. Discussion: Canadian research has demonstrated the benefit of pharmacist prescribing on patient outcomes, which is not present in the international literature. Future research may consider a meta-analysis addressing the impact on patient health. Gaps in research include comparisons between provinces, effects on physicians’ services, overall patient safety and access to health care systems and economic implications for society. Conclusion: A growing body of research on pharmacist prescribing has captured the early impact of prescribing on patient outcomes, perceptions of practice and practice change. Opportunities exist for pan-Canadian research that examines the system impact. PMID:26600824

CELSS research and development program

NASA Technical Reports Server (NTRS)

Bubenheim, David

1990-01-01

Research in Controlled Ecological Life Support Systems (CELSS) conducted by NASA indicate that plant based systems are feasible candidates for human support in space. Ames has responsibility for research and development, systems integration and control, and space flight experiment portions of the CELSS program. Important areas for development of new methods and technologies are biomass production, waste processing, water purification, air revitalization, and food processing. For the plant system, the approach was to identify the flexibility and response time for the food, water, and oxygen production, and carbon dioxide consumption processes. Tremendous increases in productivity, compared with terrestrial agriculture, were realized. Waste processing research emphasizes recycle (transformation) of human wastes, trash, and inedible biomass to forms usable as inputs to the plant production system. Efforts to improve efficiency of the plant system, select new CELSS crops for a balanced diet, and initiate closed system research with the Crop Growth Research Chambers continue. The System Control and Integration program goal is to insure orchestrated system operation of the biological, physical, and chemical operation of the biological, physical, and chemical component processors of the CELSS. Space flight studies are planned to verify adequate operation of the system in reduced gravity or microgravity environments.

Closed-loop and robust control of quantum systems.

PubMed

Chen, Chunlin; Wang, Lin-Cheng; Wang, Yuanlong

2013-01-01

For most practical quantum control systems, it is important and difficult to attain robustness and reliability due to unavoidable uncertainties in the system dynamics or models. Three kinds of typical approaches (e.g., closed-loop learning control, feedback control, and robust control) have been proved to be effective to solve these problems. This work presents a self-contained survey on the closed-loop and robust control of quantum systems, as well as a brief introduction to a selection of basic theories and methods in this research area, to provide interested readers with a general idea for further studies. In the area of closed-loop learning control of quantum systems, we survey and introduce such learning control methods as gradient-based methods, genetic algorithms (GA), and reinforcement learning (RL) methods from a unified point of view of exploring the quantum control landscapes. For the feedback control approach, the paper surveys three control strategies including Lyapunov control, measurement-based control, and coherent-feedback control. Then such topics in the field of quantum robust control as H(∞) control, sliding mode control, quantum risk-sensitive control, and quantum ensemble control are reviewed. The paper concludes with a perspective of future research directions that are likely to attract more attention.

Using goal-directed design to create a novel system for improving chronic illness care.

PubMed

Fore, David; Goldenhar, Linda M; Margolis, Peter A; Seid, Michael

2013-10-29

A learning health system enables patients, clinicians, and researchers to work together to choose care based on the best evidence, drive discovery as a natural outgrowth of patient care, and ensure innovation, quality, safety, and value in health care; all in a more real-time fashion. Our paper describes how goal-directed design (GDD) methods were employed to understand the context and goals of potential participants in such a system as part of a design process to translate the concept of a learning health system into a prototype collaborative chronic care network (C3N), specifically for pediatric inflammatory bowel disease. Thirty-six one-on-one in-depth interviews and observations were conducted with patients (10/36, 28%), caregivers (10/36, 28%), physicians/researchers (10/36, 28%), and nurses (6/36, 17%) from a pediatric gastroenterology center participating in the ImproveCareNow network. GDD methods were used to determine the context and goals of participants. These same methods were used in conjunction with idealized design process techniques to help determine characteristics of a learning health system for this pediatric health care ecology. Research was conducted in a clinic and, in the case of some patients and caregivers, at home. Thematic analysis revealed 3 parent-child dyad personas (ie, representations of interviewees' behavior patterns, goals, skills, attitudes, and contextual information) that represented adaptation to a chronic illness over time. These were used as part of a design process to generate scenarios (potential interactions between personas and the learning health system under design) from which system requirements were derived. These scenarios in turn helped guide generation, prioritization, design, measurement, and implementation of approximately 100 prototype interventions consistent with the aim of C3N becoming a learning health network. GDD methods help ensure human goals and contexts inform the design of a network of health care interventions which reflect the shape and purpose of a C3N in pediatric chronic illness care. Developing online and in-person interventions according to well-documented context and motivations of participants increases the likelihood that a C3N will enable all participants to act in ways that achieve their goals with grace and dignity. GDD methods complemented quality-improvement methods to generate prototypes consistent with clinical and research aims, as well as the goals of patient disease management.

Student Science Teachers' Ideas of the Digestive System

ERIC Educational Resources Information Center

Cardak, Osman

2015-01-01

The aim of this research is to reveal the levels of understanding of student science teachers regarding the digestive system. In this research, 116 student science teachers were tested by applying the drawing method. Upon the analysis of the drawings they made, it was found that some of them had misconceptions such as "the organs of the…

Center of Excellence for Hypersonics Research

DTIC Science & Technology

2012-01-25

detailed simulations of actual combustor configurations, and ultimately for the optimization of hypersonic air - breathing propulsion system flow paths... vehicle development programs. The Center engaged leading experts in experimental and computational analysis of hypersonic flows to provide research...advanced hypersonic vehicles and space access systems will require significant advances in the design methods and ground testing techniques to ensure

Special Strategies Observation System-Revised: A Useful Tool for Educational Research and Evaluation

ERIC Educational Resources Information Center

Meehan, Merrill L.; Cowley, Kimberly S.; Finch, Nicole L.; Chadwick, Kristine L.; Ermolov, Lisa D.; Riffle, M. Joy S.

2004-01-01

A review of the critical literature provides a brief history of systematic observation of classroom behaviors, long valued as an important data collection method in educational research. Milestones in systematic observation of classrooms are traced back to 1914 and the development and use of the Special Strategies Observation System (SSOS) through…

Presenting of Indifference Management Model of Education System in Ardabil Province Using Structural Equation Modeling

ERIC Educational Resources Information Center

Abolfazli, Elham; Saidabadi, Reza Yousefi; Fallah, Vahid

2016-01-01

The purpose of the present study is to investigate indifference management structural model in education system of Ardabil Province. The research method was integration study using Alli modeling. Statistical society of research was 420 assistant professors of educational science, managers, and deputies of Ardabil's second period of high schools…

Effects of Geographic Information System on the Learning of Environmental Education Concepts in Basic Computer-Mediated Classrooms in Nigeria

ERIC Educational Resources Information Center

Adeleke, Ayobami Gideon

2017-01-01

This research paper specifically examined the impact of Geographic Information System (GIS) integration in a learning method and on the performance and retention of Environmental Education (EE) concepts in basic social studies. Non-equivalent experimental research design was employed. 126 pupils in four intact, computer-mediated classrooms were…

A Computer-Assisted Learning Model Based on the Digital Game Exponential Reward System

ERIC Educational Resources Information Center

Moon, Man-Ki; Jahng, Surng-Gahb; Kim, Tae-Yong

2011-01-01

The aim of this research was to construct a motivational model which would stimulate voluntary and proactive learning using digital game methods offering players more freedom and control. The theoretical framework of this research lays the foundation for a pedagogical learning model based on digital games. We analyzed the game reward system, which…

Social Network Analysis as a Methodological Approach to Explore Health Systems: A Case Study Exploring Support among Senior Managers/Executives in a Hospital Network.

PubMed

De Brún, Aoife; McAuliffe, Eilish

2018-03-13

Health systems research recognizes the complexity of healthcare, and the interacting and interdependent nature of components of a health system. To better understand such systems, innovative methods are required to depict and analyze their structures. This paper describes social network analysis as a methodology to depict, diagnose, and evaluate health systems and networks therein. Social network analysis is a set of techniques to map, measure, and analyze social relationships between people, teams, and organizations. Through use of a case study exploring support relationships among senior managers in a newly established hospital group, this paper illustrates some of the commonly used network- and node-level metrics in social network analysis, and demonstrates the value of these maps and metrics to understand systems. Network analysis offers a valuable approach to health systems and services researchers as it offers a means to depict activity relevant to network questions of interest, to identify opinion leaders, influencers, clusters in the network, and those individuals serving as bridgers across clusters. The strengths and limitations inherent in the method are discussed, and the applications of social network analysis in health services research are explored.

[Development of Engineering Systems for Space Station Freedom

NASA Technical Reports Server (NTRS)

1995-01-01

From January, 1990 through September, 1995, Cleveland State University (CSU) and Lewis Research Center (LeRC) participated in a research cooperative agreement. Extensive study and experimentation were done by CSU on research technologies, methods, and techniques employed by the Space Station Freedom (SSF) project and, later, the Space Experiments Division (SED). In spite of many problems occasioned by the virtual cancellation of Space Station Freedom at LeRC, and organizational and financial problem at LeRC, CSU was able to do valuable work in the study and improvement of research operating methods there.

Production of Reliable Flight Crucial Software: Validation Methods Research for Fault Tolerant Avionics and Control Systems Sub-Working Group Meeting

NASA Technical Reports Server (NTRS)

Dunham, J. R. (Editor); Knight, J. C. (Editor)

1982-01-01

The state of the art in the production of crucial software for flight control applications was addressed. The association between reliability metrics and software is considered. Thirteen software development projects are discussed. A short term need for research in the areas of tool development and software fault tolerance was indicated. For the long term, research in format verification or proof methods was recommended. Formal specification and software reliability modeling, were recommended as topics for both short and long term research.

[Cultural anthropology of traditional Chinese medicine].

PubMed

Wan, Xia; Liu, Jian-ping; Ai, Yan-ke; Li, Liu-ji

2008-07-01

Biological, psychological and sociological model of medicine substantializes the old model lacking the social humane attributes. The new medical model makes people take medical anthropology into research and highly evaluate traditional medical system. Cultural anthropology of traditional Chinese medicine (TCM) is part of medical anthropology with three major characteristics: wide research scope, specificity, and integration. It has developed its own research methods, such as field investigation, comprehensive inspection and comparison study. Cultural anthropology provides an efficient research method for TCM, and its application would further develop TCM theory and form comprehensive evaluation on TCM effects.

Dissemination, Implementation, and Improvement Science Research in Population Health: Opportunities for Public Health and CTSAs

PubMed Central

Gase, Lauren N.; Inkelas, Moira

2015-01-01

Abstract Importance The complex, dynamic nature of health systems requires dissemination, implementation, and improvement (DII) sciences to effectively translate emerging knowledge into practice. Although they hold great promise for informing multisector policies and system‐level changes, these methods are often not strategically used by public health. Objectives and Methods More than 120 stakeholders from Southern California, including the community, federal and local government, university, and health services were convened to identify key priorities and opportunities for public health departments and Clinical and Translational Science Awards programs (CTSAs) to advance DII sciences in population health. Main Outcomes Participants identified challenges (mismatch of practice realities with narrowly focused research questions; lack of iterative learning) and solutions (using methods that fit the dynamic nature of the real world; aligning theories of change across sectors) for applying DII science research to public health problems. Pragmatic steps that public health and CTSAs can take to facilitate DII science research include: employing appropriate study designs; training scientists and practicing professionals in these methods; securing resources to advance this work; and supporting team science to solve complex‐systems issues. Conclusions Public health and CTSAs represent a unique model of practice for advancing DII research in population health. The partnership can inform policy and program development in local communities. PMID:26243323

Conceptual and statistical issues in couples observational research: Rationale and methods for design decisions.

PubMed

Baucom, Brian R W; Leo, Karena; Adamo, Colin; Georgiou, Panayiotis; Baucom, Katherine J W

2017-12-01

Observational behavioral coding methods are widely used for the study of relational phenomena. There are numerous guidelines for the development and implementation of these methods that include principles for creating new and adapting existing coding systems as well as principles for creating coding teams. While these principles have been successfully implemented in research on relational phenomena, the ever expanding array of phenomena being investigated with observational methods calls for a similar expansion of these principles. Specifically, guidelines are needed for decisions that arise in current areas of emphasis in couple research including observational investigation of related outcomes (e.g., relationship distress and psychological symptoms), the study of change in behavior over time, and the study of group similarities and differences in the enactment and perception of behavior. This article describes conceptual and statistical considerations involved in these 3 areas of research and presents principle- and empirically based rationale for design decisions related to these issues. A unifying principle underlying these guidelines is the need for careful consideration of fit between theory, research questions, selection of coding systems, and creation of coding teams. Implications of (mis)fit for the advancement of theory are discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

When East meets the West: differences in approach and mentality between old and new EU member countries

NASA Astrophysics Data System (ADS)

Matenco, Liviu

2017-04-01

There are marked differences in the management and system of research across various EU member countries. While older member states have gradually learn their differences in research systems, approach and mentality, they generally know very little on marked differences with EU13 that have a very strong impact in the design, organisation, evaluation and implementation of collaborative or European programmes. Such differences result from the organisation of the national research system, funding agencies, supervision and methods of evaluation. In particular the latter impose a markedly different career management by the promotion of local or regional journals, institutes and faculty organisation, system of promotion and management of research. In this contribution, I share my experiences in crossing the east-west mentality border, in particular discussing pre-conceived mentalities, underlying differences and suggesting better ways of promoting integrated research across European systems.

Conversion of the Defense Communications System from Analog to Digital Form.

DTIC Science & Technology

1974-06-01

Hjr,.nZing of Mail: Transmission Methods, Report R-69-046-5, Prepared for Bureau of Research and Engineering, Post Office Department, Washington (July...Transmission Methods, Report R-69-046-5, Prepared for Bureau of Research and 165 Engineerin-, Post Office Department, Washington (July 1970), P. 3-5. 3...Prepared for Bureau of Research and Engineering, Post Office Department Washington . July 1970. Df-AG" 5M ARMY COMMAND AND SENERAL STAFF COLL FORT

An optimal design of wind turbine and ship structure based on neuro-response surface method

NASA Astrophysics Data System (ADS)

Lee, Jae-Chul; Shin, Sung-Chul; Kim, Soo-Young

2015-07-01

The geometry of engineering systems affects their performances. For this reason, the shape of engineering systems needs to be optimized in the initial design stage. However, engineering system design problems consist of multi-objective optimization and the performance analysis using commercial code or numerical analysis is generally time-consuming. To solve these problems, many engineers perform the optimization using the approximation model (response surface). The Response Surface Method (RSM) is generally used to predict the system performance in engineering research field, but RSM presents some prediction errors for highly nonlinear systems. The major objective of this research is to establish an optimal design method for multi-objective problems and confirm its applicability. The proposed process is composed of three parts: definition of geometry, generation of response surface, and optimization process. To reduce the time for performance analysis and minimize the prediction errors, the approximation model is generated using the Backpropagation Artificial Neural Network (BPANN) which is considered as Neuro-Response Surface Method (NRSM). The optimization is done for the generated response surface by non-dominated sorting genetic algorithm-II (NSGA-II). Through case studies of marine system and ship structure (substructure of floating offshore wind turbine considering hydrodynamics performances and bulk carrier bottom stiffened panels considering structure performance), we have confirmed the applicability of the proposed method for multi-objective side constraint optimization problems.

Development of Souvenir Production Transaction Processing System

NASA Astrophysics Data System (ADS)

Rumambi, H.; Kaparang, R.; Lintong, J.

2018-01-01

This research aims to design a souvenir production transaction processing system for the craftsmen in North Sulawesi. The craftsmen make very simple recordings about souvenir production transactions and use documents that are not in accordance with the generally accepted accounting practices. This research uses qualitative method. The data is collected through interviews, observations, documents and literatures studies. The research stages are conducted in preliminary studies, data collection, data analyzed and system design. The design of system is built from chart of account, accounting cycle and documents as input and get processed in accounting recording. The outputs are financial statements. The system design provides benefits for the craftsmen in assessing the financial performance and getting financing from bank.

Evaluation of Contamination Inspection and Analysis Methods through Modeling System Performance

NASA Technical Reports Server (NTRS)

Seasly, Elaine; Dever, Jason; Stuban, Steven M. F.

2016-01-01

Contamination is usually identified as a risk on the risk register for sensitive space systems hardware. Despite detailed, time-consuming, and costly contamination control efforts during assembly, integration, and test of space systems, contaminants are still found during visual inspections of hardware. Improved methods are needed to gather information during systems integration to catch potential contamination issues earlier and manage contamination risks better. This research explores evaluation of contamination inspection and analysis methods to determine optical system sensitivity to minimum detectable molecular contamination levels based on IEST-STD-CC1246E non-volatile residue (NVR) cleanliness levels. Potential future degradation of the system is modeled given chosen modules representative of optical elements in an optical system, minimum detectable molecular contamination levels for a chosen inspection and analysis method, and determining the effect of contamination on the system. By modeling system performance based on when molecular contamination is detected during systems integration and at what cleanliness level, the decision maker can perform trades amongst different inspection and analysis methods and determine if a planned method is adequate to meet system requirements and manage contamination risk.

Research on Resilience of Power Systems Under Natural Disasters—A Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Yezhou; Chen, Chen; Wang, Jianhui

2016-03-01

Natural disasters can cause large blackouts. Research into natural disaster impacts on electric power systems is emerging to understand the causes of the blackouts, explore ways to prepare and harden the grid, and increase the resilience of the power grid under such events. At the same time, new technologies such as smart grid, micro grid, and wide area monitoring applications could increase situational awareness as well as enable faster restoration of the system. This paper aims to consolidate and review the progress of the research field towards methods and tools of forecasting natural disaster related power system disturbances, hardening andmore » pre-storm operations, and restoration models. Challenges and future research opportunities are also presented in the paper.« less

Research of test fault diagnosis method for micro-satellite PSS

NASA Astrophysics Data System (ADS)

Wu, Haichao; Wang, Jinqi; Yang, Zhi; Yan, Meizhi

2017-11-01

Along with the increase in the number of micro-satellite and the shortening of the product's lifecycle, negative effects of satellite ground test failure become more and more serious. Real-time and efficient fault diagnosis becomes more and more necessary. PSS plays an important role in the satellite ground test's safety and reliability as one of the most important subsystems that guarantees the safety of micro-satellite energy. Take test fault diagnosis method of micro-satellite PSS as research object. On the basis of system features of PSS and classic fault diagnosis methods, propose a kind of fault diagnosis method based on the layered and loose coupling way. This article can provide certain reference for fault diagnosis methods research of other subsystems of micro-satellite.

[Construction of biopharmaceutics classification system of Chinese materia medica].

PubMed

Liu, Yang; Wei, Li; Dong, Ling; Zhu, Mei-Ling; Tang, Ming-Min; Zhang, Lei

2014-12-01

Based on the characteristics of multicomponent of traditional Chinese medicine and drawing lessons from the concepts, methods and techniques of biopharmaceutics classification system (BCS) in chemical field, this study comes up with the science framework of biopharmaceutics classification system of Chinese materia medica (CMMBCS). Using the different comparison method of multicomponent level and the CMMBCS method of overall traditional Chinese medicine, the study constructs the method process while setting forth academic thoughts and analyzing theory. The basic role of this system is clear to reveal the interaction and the related absorption mechanism of multicomponent in traditional Chinese medicine. It also provides new ideas and methods for improving the quality of Chinese materia medica and the development of new drug research.

Iowa DOT library services, collection & technology assessment.

DOT National Transportation Integrated Search

2014-07-01

Assesses the impact of library services on research projects, proposes methods to improve the impact of : library services on research projects, assesses current library technology systems and proposes upgrades, : assesses current library collection ...

Structural dynamics branch research and accomplishments

NASA Technical Reports Server (NTRS)

1990-01-01

Summaries are presented of fiscal year 1989 research highlights from the Structural Dynamics Branch at NASA Lewis Research Center. Highlights from the branch's major work areas include aeroelasticity, vibration control, dynamic systems, and computation structural methods. A listing of the fiscal year 1989 branch publications is given.

Pedagogical Considerations for Effectively Teaching Qualitative Research to Students in an Online Environment

ERIC Educational Resources Information Center

Bender, Sara; Hill, Karlie

2016-01-01

Qualitative research aims to understand both individual meaning as well as complex systemic interactions as they apply to social problems or individual experiences. This method of research is both inductive and flexible, allowing for a holistic approach that facilitates a rich understanding of the content examined. Past research identifies a…

Large-scale-system effectiveness analysis. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patton, A.D.; Ayoub, A.K.; Foster, J.W.

1979-11-01

Objective of the research project has been the investigation and development of methods for calculating system reliability indices which have absolute, and measurable, significance to consumers. Such indices are a necessary prerequisite to any scheme for system optimization which includes the economic consequences of consumer service interruptions. A further area of investigation has been joint consideration of generation and transmission in reliability studies. Methods for finding or estimating the probability distributions of some measures of reliability performance have been developed. The application of modern Monte Carlo simulation methods to compute reliability indices in generating systems has been studied.

Real-time measurement and monitoring of absorbed dose for electron beams

NASA Astrophysics Data System (ADS)

Korenev, Sergey; Korenev, Ivan; Rumega, Stanislav; Grossman, Leon

2004-09-01

The real-time method and system for measurement and monitoring of absorbed dose for industrial and research electron accelerators is considered in the report. The system was created on the basis of beam parameters method. The main concept of this method consists in the measurement of dissipated kinetic energy of electrons in the irradiated product, determination of number of electrons and mass of irradiated product in the same cell by following calculation of absorbed dose in the cell. The manual and automation systems for dose measurements are described. The systems are acceptable for all types of electron accelerators.

Decision Support System for Determining Scholarship Selection using an Analytical Hierarchy Process

NASA Astrophysics Data System (ADS)

Puspitasari, T. D.; Sari, E. O.; Destarianto, P.; Riskiawan, H. Y.

2018-01-01

Decision Support System is a computer program application that analyzes data and presents it so that users can make decision more easily. Determining Scholarship Selection study case in Senior High School in east Java wasn’t easy. It needed application to solve the problem, to improve the accuracy of targets for prospective beneficiaries of poor students and to speed up the screening process. This research will build system uses the method of Analytical Hierarchy Process (AHP) is a method that solves a complex and unstructured problem into its group, organizes the groups into a hierarchical order, inputs numerical values instead of human perception in comparing relative and ultimately with a synthesis determined elements that have the highest priority. The accuracy system for this research is 90%.

Exploring Effective Decision Making through Human-Centered and Computational Intelligence Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, Kyungsik; Cook, Kristin A.; Shih, Patrick C.

Decision-making has long been studied to understand a psychological, cognitive, and social process of selecting an effective choice from alternative options. Its studies have been extended from a personal level to a group and collaborative level, and many computer-aided decision-making systems have been developed to help people make right decisions. There has been significant research growth in computational aspects of decision-making systems, yet comparatively little effort has existed in identifying and articulating user needs and requirements in assessing system outputs and the extent to which human judgments could be utilized for making accurate and reliable decisions. Our research focus ismore » decision-making through human-centered and computational intelligence methods in a collaborative environment, and the objectives of this position paper are to bring our research ideas to the workshop, and share and discuss ideas.« less

ENFIN--A European network for integrative systems biology.

PubMed

Kahlem, Pascal; Clegg, Andrew; Reisinger, Florian; Xenarios, Ioannis; Hermjakob, Henning; Orengo, Christine; Birney, Ewan

2009-11-01

Integration of biological data of various types and the development of adapted bioinformatics tools represent critical objectives to enable research at the systems level. The European Network of Excellence ENFIN is engaged in developing an adapted infrastructure to connect databases, and platforms to enable both the generation of new bioinformatics tools and the experimental validation of computational predictions. With the aim of bridging the gap existing between standard wet laboratories and bioinformatics, the ENFIN Network runs integrative research projects to bring the latest computational techniques to bear directly on questions dedicated to systems biology in the wet laboratory environment. The Network maintains internally close collaboration between experimental and computational research, enabling a permanent cycling of experimental validation and improvement of computational prediction methods. The computational work includes the development of a database infrastructure (EnCORE), bioinformatics analysis methods and a novel platform for protein function analysis FuncNet.

The research of distributed interactive simulation based on HLA in coal mine industry inherent safety

NASA Astrophysics Data System (ADS)

Dou, Zhi-Wu

2010-08-01

To solve the inherent safety problem puzzling the coal mining industry, analyzing the characteristic and the application of distributed interactive simulation based on high level architecture (DIS/HLA), a new method is proposed for developing coal mining industry inherent safety distributed interactive simulation adopting HLA technology. Researching the function and structure of the system, a simple coal mining industry inherent safety is modeled with HLA, the FOM and SOM are developed, and the math models are suggested. The results of the instance research show that HLA plays an important role in developing distributed interactive simulation of complicated distributed system and the method is valid to solve the problem puzzling coal mining industry. To the coal mining industry, the conclusions show that the simulation system with HLA plays an important role to identify the source of hazard, to make the measure for accident, and to improve the level of management.

Insects as model systems in cell biology.

PubMed

Keil, Thomas A; Steinbrecht, R Alexander

2010-01-01

For almost 100 years, insects have been favorable "model systems" in biology. Just to mention a few examples: fruit flies in genetics and developmental biology; bugs and caterpillars in hormone research; houseflies, blowflies, and locusts in neurobiology; silk moths in pheromone research; honeybees and crickets in neuroethology. For more than 50 years the electron microscope (EM) has been a valuable tool in analyzing the structure of cells and organs of these creatures. However, progress in specimen preparation was relatively slow compared with mammalian material and, in 1970, it was taken for granted that insects were much more difficult to fix than mammals. Since then, methods have dramatically improved, and satisfactory results can now be obtained routinely with chemical as well as cryofixation. In this chapter we briefly demonstrate what can be achieved with insect material, and help the researcher to find the most appropriate method for her/his systems and scientific questions. Copyright © 2010 Elsevier Inc. All rights reserved.

Low-Cost Optical Mapping Systems for Panoramic Imaging of Complex Arrhythmias and Drug-Action in Translational Heart Models

NASA Astrophysics Data System (ADS)

Lee, Peter; Calvo, Conrado J.; Alfonso-Almazán, José M.; Quintanilla, Jorge G.; Chorro, Francisco J.; Yan, Ping; Loew, Leslie M.; Filgueiras-Rama, David; Millet, José

2017-02-01

Panoramic optical mapping is the primary method for imaging electrophysiological activity from the entire outer surface of Langendorff-perfused hearts. To date, it is the only method of simultaneously measuring multiple key electrophysiological parameters, such as transmembrane voltage and intracellular free calcium, at high spatial and temporal resolution. Despite the impact it has already had on the fields of cardiac arrhythmias and whole-heart computational modeling, present-day system designs precludes its adoption by the broader cardiovascular research community because of their high costs. Taking advantage of recent technological advances, we developed and validated low-cost optical mapping systems for panoramic imaging using Langendorff-perfused pig hearts, a clinically-relevant model in basic research and bioengineering. By significantly lowering financial thresholds, this powerful cardiac electrophysiology imaging modality may gain wider use in research and, even, teaching laboratories, which we substantiated using the lower-cost Langendorff-perfused rabbit heart model.

Low-Cost Optical Mapping Systems for Panoramic Imaging of Complex Arrhythmias and Drug-Action in Translational Heart Models.

PubMed

Lee, Peter; Calvo, Conrado J; Alfonso-Almazán, José M; Quintanilla, Jorge G; Chorro, Francisco J; Yan, Ping; Loew, Leslie M; Filgueiras-Rama, David; Millet, José

2017-02-27

Panoramic optical mapping is the primary method for imaging electrophysiological activity from the entire outer surface of Langendorff-perfused hearts. To date, it is the only method of simultaneously measuring multiple key electrophysiological parameters, such as transmembrane voltage and intracellular free calcium, at high spatial and temporal resolution. Despite the impact it has already had on the fields of cardiac arrhythmias and whole-heart computational modeling, present-day system designs precludes its adoption by the broader cardiovascular research community because of their high costs. Taking advantage of recent technological advances, we developed and validated low-cost optical mapping systems for panoramic imaging using Langendorff-perfused pig hearts, a clinically-relevant model in basic research and bioengineering. By significantly lowering financial thresholds, this powerful cardiac electrophysiology imaging modality may gain wider use in research and, even, teaching laboratories, which we substantiated using the lower-cost Langendorff-perfused rabbit heart model.

Using an integrated knowledge translation approach to build a public health research agenda

PubMed Central

2014-01-01

Background Public Health Systems Research is an emerging field of research that is gaining importance in Canada. Methods On October 22 and 23, 2012, public health researchers, practitioners, and policy-makers came together at the Accelerating Public Health Systems Research in Ontario: Building an Agenda think tank to develop a research agenda for the province. Results This agenda included the identification of the six top priorities for research in Ontario: public health performance, evidence-based practice, public health organization and structure, public health human resources, public health infrastructure, and partnerships/linkages. Conclusions This paper explores the priorities in detail and hopes to bring more attention to this area of research. PMID:24475759

Research on key technology of the verification system of steel rule based on vision measurement

NASA Astrophysics Data System (ADS)

Jia, Siyuan; Wang, Zhong; Liu, Changjie; Fu, Luhua; Li, Yiming; Lu, Ruijun

2018-01-01

The steel rule plays an important role in quantity transmission. However, the traditional verification method of steel rule based on manual operation and reading brings about low precision and low efficiency. A machine vison based verification system of steel rule is designed referring to JJG1-1999-Verificaiton Regulation of Steel Rule [1]. What differentiates this system is that it uses a new calibration method of pixel equivalent and decontaminates the surface of steel rule. Experiments show that these two methods fully meet the requirements of the verification system. Measuring results strongly prove that these methods not only meet the precision of verification regulation, but also improve the reliability and efficiency of the verification system.

An iterated cubature unscented Kalman filter for large-DoF systems identification with noisy data

NASA Astrophysics Data System (ADS)

Ghorbani, Esmaeil; Cha, Young-Jin

2018-04-01

Structural and mechanical system identification under dynamic loading has been an important research topic over the last three or four decades. Many Kalman-filtering-based approaches have been developed for linear and nonlinear systems. For example, to predict nonlinear systems, an unscented Kalman filter was applied. However, from extensive literature reviews, the unscented Kalman filter still showed weak performance on systems with large degrees of freedom. In this research, a modified unscented Kalman filter is proposed by integration of a cubature Kalman filter to improve the system identification performance of systems with large degrees of freedom. The novelty of this work lies on conjugating the unscented transform with the cubature integration concept to find a more accurate output from the transformation of the state vector and its related covariance matrix. To evaluate the proposed method, three different numerical models (i.e., the single degree-of-freedom Bouc-Wen model, the linear 3-degrees-of-freedom system, and the 10-degrees-of-freedom system) are investigated. To evaluate the robustness of the proposed method, high levels of noise in the measured response data are considered. The results show that the proposed method is significantly superior to the traditional UKF for noisy measured data in systems with large degrees of freedom.

Theoretical and experimental research on diversity reception technology in NLOS UV communication system.

PubMed

Han, Dahai; Liu, Yile; Zhang, Kai; Luo, Pengfei; Zhang, Min

2012-07-02

Diversity reception technology is introduced into ultraviolet communication area in this article with theory analysis and practical experiment. The idea of diversity reception was known as a critical effective method in wireless communication area that improves the Gain significantly especially for the multi-scattering channel. A theoretical modeling and simulation method are proposed to depict the principle and feasibility of diversity reception adopted in UV communication. Besides, an experimental test-bed using ultraviolet LED and dual receiver of photomultiplier tube is setup to characterize the effects of diversity receiving in non-line-of-sight (NLOS) ultraviolet communication system. The experiment results are compared with the theoretical ones to verify the accuracy of theoretical modeling and the effect of diversity reception. Equal gain combining (EGC) method was adopted as the diversity mechanism in this paper. The research results of theory and experiment provide insight into the channel characteristics and achievable capabilities of ultraviolet communication system with diversity receiving method.

Imbalance detection in a manufacturing system: An agent-based model usage

NASA Astrophysics Data System (ADS)

Shevchuk, G. K.; Zvereva, O. M.; Medvedev, M. A.

2017-11-01

This paper delivers the results of the research work targeted at communications in a manufacturing system. A computer agent-based model which simulates manufacturing system functioning has been engineered. The system lifecycle consists of two recursively repeated stages: a communication stage and a production stage. Model data sets were estimated with the static Leontief's equilibrium equation usage. In experiments relationships between the manufacturing system lifecycle time and conditions of equilibrium violations have been identified. The research results are to be used to propose violation negative influence compensation methods.

The design method and research status of vehicle detection system based on geomagnetic detection principle

NASA Astrophysics Data System (ADS)

Lin, Y. H.; Bai, R.; Qian, Z. H.

2018-03-01

Vehicle detection systems are applied to obtain real-time information of vehicles, realize traffic control and reduce traffic pressure. This paper reviews geomagnetic sensors as well as the research status of the vehicle detection system. Presented in the paper are also our work on the vehicle detection system, including detection algorithms and experimental results. It is found that the GMR based vehicle detection system has a detection accuracy up to 98% with a high potential for application in the road traffic control area.

Reusable design: A proposed approach to Public Health Informatics system design

PubMed Central

2011-01-01

Background Since it was first defined in 1995, Public Health Informatics (PHI) has become a recognized discipline, with a research agenda, defined domain-specific competencies and a specialized corpus of technical knowledge. Information systems form a cornerstone of PHI research and implementation, representing significant progress for the nascent field. However, PHI does not advocate or incorporate standard, domain-appropriate design methods for implementing public health information systems. Reusable design is generalized design advice that can be reused in a range of similar contexts. We propose that PHI create and reuse information design knowledge by taking a systems approach that incorporates design methods from the disciplines of Human-Computer Interaction, Interaction Design and other related disciplines. Discussion Although PHI operates in a domain with unique characteristics, many design problems in public health correspond to classic design problems, suggesting that existing design methods and solution approaches are applicable to the design of public health information systems. Among the numerous methodological frameworks used in other disciplines, we identify scenario-based design and participatory design as two widely-employed methodologies that are appropriate for adoption as PHI standards. We make the case that these methods show promise to create reusable design knowledge in PHI. Summary We propose the formalization of a set of standard design methods within PHI that can be used to pursue a strategy of design knowledge creation and reuse for cost-effective, interoperable public health information systems. We suggest that all public health informaticians should be able to use these design methods and the methods should be incorporated into PHI training. PMID:21333000

Systems Science and Childhood Obesity: A Systematic Review and New Directions

PubMed Central

Foster, E. Michael

2013-01-01

As a public health problem, childhood obesity operates at multiple levels, ranging from individual health behaviors to school and community characteristics to public policies. Examining obesity, particularly childhood obesity, from any single perspective is likely to fail, and systems science methods offer a possible solution. We systematically reviewed studies that examined the causes and/or consequences of obesity from a systems science perspective. The 21 included studies addressed four general areas of systems science in obesity: (1) translating interventions to a large scale, (2) the effect of obesity on other health or economic outcomes, (3) the effect of geography on obesity, and (4) the effect of social networks on obesity. In general, little research addresses obesity from a true, integrated systems science perspective, and the available research infrequently focuses on children. This shortcoming limits the ability of that research to inform public policy. However, we believe that the largely incremental approaches used in current systems science lay a foundation for future work and present a model demonstrating the system of childhood obesity. Systems science perspective and related methods are particularly promising in understanding the link between childhood obesity and adult outcomes. Systems models emphasize the evolution of agents and their interactions; such evolution is particularly salient in the context of a developing child. PMID:23710344

Study of Intelligent Secure Chemical Inventory Management System

NASA Astrophysics Data System (ADS)

Shukran, Mohd Afizi Mohd; Naim Abdullah, Muhammad; Nazri Ismail, Mohd; Maskat, Kamaruzaman; Isa, Mohd Rizal Mohd; Shahfee Ishak, Muhammad; Adib Khairuddin, Muhamad

2017-08-01

Chemical inventory management system has been experiencing a new revolution from traditional inventory system which is manual to an automated inventory management system. In this paper, some review of the classic and modern approaches to chemical inventory management system has been discussed. This paper also describe about both type of inventory management. After a comparative analysis of the traditional method and automated method, it can be said that both methods have some distinctive characteristics. Moreover, the automated inventory management method has higher accuracy of calculation because the calculations are handled by software, eliminating possible errors and saving time. The automated inventory system also allows users and administrators to track the availability, location and consumption of chemicals. The study of this paper can provide forceful review analysis support for the chemical inventory management related research.

Decision based on big data research for non-small cell lung cancer in medical artificial system in developing country.

PubMed

Wu, Jia; Tan, Yanlin; Chen, Zhigang; Zhao, Ming

2018-06-01

Non-small cell lung cancer (NSCLC) is a high risk cancer and is usually scanned by PET-CT for testing, predicting and then give the treatment methods. However, in the actual hospital system, at least 640 images must be generated for each patient through PET-CT scanning. Especially in developing countries, a huge number of patients in NSCLC are attended by doctors. Artificial system can predict and make decision rapidly. According to explore and research artificial medical system, the selection of artificial observations also can result in low work efficiency for doctors. In this study, data information of 2,789,675 patients in three hospitals in China are collected, compiled, and used as the research basis; these data are obtained through image acquisition and diagnostic parameter machine decision-making method on the basis of the machine diagnosis and medical system design model of adjuvant therapy. By combining image and diagnostic parameters, the machine decision diagnosis auxiliary algorithm is established. Experimental result shows that the accuracy has reached 77% in NSCLC. Copyright © 2018 Elsevier B.V. All rights reserved.

Reliability Analysis of RSG-GAS Primary Cooling System to Support Aging Management Program

NASA Astrophysics Data System (ADS)

Deswandri; Subekti, M.; Sunaryo, Geni Rina

2018-02-01

Multipurpose Research Reactor G.A. Siwabessy (RSG-GAS) which has been operating since 1987 is one of the main facilities on supporting research, development and application of nuclear energy programs in BATAN. Until now, the RSG-GAS research reactor has been successfully operated safely and securely. However, because it has been operating for nearly 30 years, the structures, systems and components (SSCs) from the reactor would have started experiencing an aging phase. The process of aging certainly causes a decrease in reliability and safe performances of the reactor, therefore the aging management program is needed to resolve the issues. One of the programs in the aging management is to evaluate the safety and reliability of the system and also screening the critical components to be managed.One method that can be used for such purposes is the Fault Tree Analysis (FTA). In this papers FTA method is used to screening the critical components in the RSG-GAS Primary Cooling System. The evaluation results showed that the primary isolation valves are the basic events which are dominant against the system failure.

Gear and Transmission Research at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Townsend, Dennis P.

1997-01-01

This paper is a review of some of the research work of the NASA Lewis Research Center Mechanical Components Branch. It includes a brief review of the NASA Lewis Research Center and the Mechanical Components Branch. The research topics discussed are crack propagation of gear teeth, gear noise of spiral bevel and other gears, design optimization methods, methods we have investigated for transmission diagnostics, the analytical and experimental study of gear thermal conditions, the analytical and experimental study of split torque systems, the evaluation of several new advanced gear steels and transmission lubricants and the evaluation of various aircraft transmissions. The area of research needs for gearing and transmissions is also discussed.

Summary of research in applied mathematics, numerical analysis, and computer sciences

NASA Technical Reports Server (NTRS)

1986-01-01

The major categories of current ICASE research programs addressed include: numerical methods, with particular emphasis on the development and analysis of basic numerical algorithms; control and parameter identification problems, with emphasis on effective numerical methods; computational problems in engineering and physical sciences, particularly fluid dynamics, acoustics, and structural analysis; and computer systems and software, especially vector and parallel computers.

A CTSA Agenda to Advance Methods for Comparative Effectiveness Research

PubMed Central

Helfand, Mark; Tunis, Sean; Whitlock, Evelyn P.; Pauker, Stephen G.; Basu, Anirban; Chilingerian, Jon; Harrell Jr., Frank E.; Meltzer, David O.; Montori, Victor M.; Shepard, Donald S.; Kent, David M.

2011-01-01

Abstract Clinical research needs to be more useful to patients, clinicians, and other decision makers. To meet this need, more research should focus on patient‐centered outcomes, compare viable alternatives, and be responsive to individual patients’ preferences, needs, pathobiology, settings, and values. These features, which make comparative effectiveness research (CER) fundamentally patient‐centered, challenge researchers to adopt or develop methods that improve the timeliness, relevance, and practical application of clinical studies. In this paper, we describe 10 priority areas that address 3 critical needs for research on patient‐centered outcomes (PCOR): (1) developing and testing trustworthy methods to identify and prioritize important questions for research; (2) improving the design, conduct, and analysis of clinical research studies; and (3) linking the process and outcomes of actual practice to priorities for research on patient‐centered outcomes. We argue that the National Institutes of Health, through its clinical and translational research program, should accelerate the development and refinement of methods for CER by linking a program of methods research to the broader portfolio of large, prospective clinical and health system studies it supports. Insights generated by this work should be of enormous value to PCORI and to the broad range of organizations that will be funding and implementing CER. Clin Trans Sci 2011; Volume 4: 188–198 PMID:21707950

On an interface of the online system for a stochastic analysis of the varied information flows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorshenin, Andrey K.; MIREA, MGUPI; Kuzmin, Victor Yu.

The article describes a possible approach to the construction of an interface of an online asynchronous system that allows researchers to analyse varied information flows. The implemented stochastic methods are based on the mixture models and the method of moving separation of mixtures. The general ideas of the system functionality are demonstrated on an example for some moments of a finite normal mixture.

Developing a reliable method for signal wire attachment : [research results].

DOT National Transportation Integrated Search

2013-03-01

Railroad signaling systems detect trains on the track, identify track fractures, prevent derailments, and alert signal crossing stations when trains approach. These systems are vital to safe train operation; therefore, each component of this system h...

Formal Methods in Air Traffic Management: The Case of Unmanned Aircraft Systems

NASA Technical Reports Server (NTRS)

Munoz, Cesar A.

2015-01-01

As the technological and operational capabilities of unmanned aircraft systems (UAS) continue to grow, so too does the need to introduce these systems into civil airspace. Unmanned Aircraft Systems Integration in the National Airspace System is a NASA research project that addresses the integration of civil UAS into non-segregated airspace operations. One of the major challenges of this integration is the lack of an onboard pilot to comply with the legal requirement that pilots see and avoid other aircraft. The need to provide an equivalent to this requirement for UAS has motivated the development of a detect and avoid (DAA) capability to provide the appropriate situational awareness and maneuver guidance in avoiding and remaining well clear of traffic aircraft. Formal methods has played a fundamental role in the development of this capability. This talk reports on the formal methods work conducted under NASA's Safe Autonomous System Operations project in support of the development of DAA for UAS. This work includes specification of low-level and high-level functional requirements, formal verification of algorithms, and rigorous validation of software implementations. The talk also discusses technical challenges in formal methods research in the context of the development and safety analysis of advanced air traffic management concepts.

Using design methods to provide the care that people want and need.

PubMed

Erwin, Kim; Krishnan, Jerry A

2016-01-01

Kim Erwin is an Assistant Professor at IIT Institute of Design and trained in user-centered design methods, which put people at the center of any problem space so as to develop solutions that better fit their everyday lives, activities and context. Her expertise is in making complex information easier to understand and use. Her research targets communication tools and methods for collaborative knowledge construction built through shared experiences. Her book, Communicating the New: Methods to shape and accelerate innovation focuses on helping teams explore, build and diffuse critical knowledge inside organizations. Jerry Krishnan is a Professor of Medicine and Public Health, and Associate Vice President for Population Health Sciences at the University of Illinois Hospital & Health Sciences System. He pioneered the use of Analytic Hierarchy Process to elicit the expressed needs of stakeholders for research. He previously served as Chair of the US FDA Pulmonary and Allergy Drugs Advisory Committee and is a Principal Investigator in NIH and Patient Centered Outcomes Research Institute (PCORI)-funded research consortia. He chairs the US National Heart, Lung, and Blood Institute (NHLBI) Clinical Trials review committee and the PCORI Improving Healthcare Systems merit review panel.

A Methodological Approach to Small Area Estimation for the Behavioral Risk Factor Surveillance System

PubMed Central

Xu, Fang; Wallace, Robyn C.; Garvin, William; Greenlund, Kurt J.; Bartoli, William; Ford, Derek; Eke, Paul; Town, G. Machell

2016-01-01

Public health researchers have used a class of statistical methods to calculate prevalence estimates for small geographic areas with few direct observations. Many researchers have used Behavioral Risk Factor Surveillance System (BRFSS) data as a basis for their models. The aims of this study were to 1) describe a new BRFSS small area estimation (SAE) method and 2) investigate the internal and external validity of the BRFSS SAEs it produced. The BRFSS SAE method uses 4 data sets (the BRFSS, the American Community Survey Public Use Microdata Sample, Nielsen Claritas population totals, and the Missouri Census Geographic Equivalency File) to build a single weighted data set. Our findings indicate that internal and external validity tests were successful across many estimates. The BRFSS SAE method is one of several methods that can be used to produce reliable prevalence estimates in small geographic areas. PMID:27418213

Implementation of the CDC translational informatics platform--from genetic variants to the national Swedish Rheumatology Quality Register.

PubMed

Abugessaisa, Imad; Gomez-Cabrero, David; Snir, Omri; Lindblad, Staffan; Klareskog, Lars; Malmström, Vivianne; Tegnér, Jesper

2013-04-02

Sequencing of the human genome and the subsequent analyses have produced immense volumes of data. The technological advances have opened new windows into genomics beyond the DNA sequence. In parallel, clinical practice generate large amounts of data. This represents an underused data source that has much greater potential in translational research than is currently realized. This research aims at implementing a translational medicine informatics platform to integrate clinical data (disease diagnosis, diseases activity and treatment) of Rheumatoid Arthritis (RA) patients from Karolinska University Hospital and their research database (biobanks, genotype variants and serology) at the Center for Molecular Medicine, Karolinska Institutet. Requirements engineering methods were utilized to identify user requirements. Unified Modeling Language and data modeling methods were used to model the universe of discourse and data sources. Oracle11g were used as the database management system, and the clinical development center (CDC) was used as the application interface. Patient data were anonymized, and we employed authorization and security methods to protect the system. We developed a user requirement matrix, which provided a framework for evaluating three translation informatics systems. The implementation of the CDC successfully integrated biological research database (15172 DNA, serum and synovial samples, 1436 cell samples and 65 SNPs per patient) and clinical database (5652 clinical visit) for the cohort of 379 patients presents three profiles. Basic functionalities provided by the translational medicine platform are research data management, development of bioinformatics workflow and analysis, sub-cohort selection, and re-use of clinical data in research settings. Finally, the system allowed researchers to extract subsets of attributes from cohorts according to specific biological, clinical, or statistical features. Research and clinical database integration is a real challenge and a road-block in translational research. Through this research we addressed the challenges and demonstrated the usefulness of CDC. We adhered to ethical regulations pertaining to patient data, and we determined that the existing software solutions cannot meet the translational research needs at hand. We used RA as a test case since we have ample data on active and longitudinal cohort.

Development of intelligent semantic search system for rubber research data in Thailand

NASA Astrophysics Data System (ADS)

Kaewboonma, Nattapong; Panawong, Jirapong; Pianhanuruk, Ekkawit; Buranarach, Marut

2017-10-01

The rubber production of Thailand increased not only by strong demand from the world market, but was also stimulated strongly through the replanting program of the Thai Government from 1961 onwards. With the continuous growth of rubber research data volume on the Web, the search for information has become a challenging task. Ontologies are used to improve the accuracy of information retrieval from the web by incorporating a degree of semantic analysis during the search. In this context, we propose an intelligent semantic search system for rubber research data in Thailand. The research methods included 1) analyzing domain knowledge, 2) ontologies development, and 3) intelligent semantic search system development to curate research data in trusted digital repositories may be shared among the wider Thailand rubber research community.

Project Final Report: Ubiquitous Computing and Monitoring System (UCoMS) for Discovery and Management of Energy Resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tzeng, Nian-Feng; White, Christopher D.; Moreman, Douglas

2012-07-14

The UCoMS research cluster has spearheaded three research areas since August 2004, including wireless and sensor networks, Grid computing, and petroleum applications. The primary goals of UCoMS research are three-fold: (1) creating new knowledge to push forward the technology forefronts on pertinent research on the computing and monitoring aspects of energy resource management, (2) developing and disseminating software codes and toolkits for the research community and the public, and (3) establishing system prototypes and testbeds for evaluating innovative techniques and methods. Substantial progress and diverse accomplishment have been made by research investigators in their respective areas of expertise cooperatively onmore » such topics as sensors and sensor networks, wireless communication and systems, computational Grids, particularly relevant to petroleum applications.« less

Visualizing the deep end of sound: plotting multi-parameter results from infrasound data analysis

NASA Astrophysics Data System (ADS)

Perttu, A. B.; Taisne, B.

2016-12-01

Infrasound is sound below the threshold of human hearing: approximately 20 Hz. The field of infrasound research, like other waveform based fields relies on several standard processing methods and data visualizations, including waveform plots and spectrograms. The installation of the International Monitoring System (IMS) global network of infrasound arrays, contributed to the resurgence of infrasound research. Array processing is an important method used in infrasound research, however, this method produces data sets with a large number of parameters, and requires innovative plotting techniques. The goal in designing new figures is to be able to present easily comprehendible, and information-rich plots by careful selection of data density and plotting methods.

Preliminary Development of Online Monitoring Acoustic Emission System for the Integrity of Research Reactor Components

NASA Astrophysics Data System (ADS)

Bakhri, S.; Sumarno, E.; Himawan, R.; Akbar, T. Y.; Subekti, M.; Sunaryo, G. R.

2018-02-01

Three research reactors owned by BATAN have been more than 25 years. Aging of (Structure, System and Component) SSC which is mainly related to mechanical causes become the most important issue for the sustainability and safety operation. Acoustic Emission (AE) is one of the appropriate and recommended methods by the IAEA for inspection as well as at the same time for the monitoring of mechanical SSC related. However, the advantages of AE method in detecting the acoustic emission both for the inspection and the online monitoring require a relatively complex measurement system including hardware software system for the signal detection and analysis purposes. Therefore, aim of this work was to develop an AE system based on an embedded system which capable for doing both the online monitoring and inspection of the research reactor’s integrity structure. An embedded system was selected due to the possibility to install the equipment on the field in extreme environmental condition with capability to store, analyses, and send the required information for further maintenance and operation. The research was done by designing the embedded system based on the Field Programmable Gate Array (FPGA) platform, because of their execution speed and system reconfigurable opportunities. The AE embedded system is then tested to identify the AE source location and AE characteristic under tensile material testing. The developed system successfully acquire the AE elastic waveform and determine the parameter-based analysis such as the amplitude, peak, duration, rise time, counts and the average frequency both for the source location test and the tensile test.

Investigation of the Multiple Method Adaptive Control (MMAC) method for flight control systems

NASA Technical Reports Server (NTRS)

Athans, M.; Baram, Y.; Castanon, D.; Dunn, K. P.; Green, C. S.; Lee, W. H.; Sandell, N. R., Jr.; Willsky, A. S.

1979-01-01

The stochastic adaptive control of the NASA F-8C digital-fly-by-wire aircraft using the multiple model adaptive control (MMAC) method is presented. The selection of the performance criteria for the lateral and the longitudinal dynamics, the design of the Kalman filters for different operating conditions, the identification algorithm associated with the MMAC method, the control system design, and simulation results obtained using the real time simulator of the F-8 aircraft at the NASA Langley Research Center are discussed.

Mathematical correlation of modal-parameter-identification methods via system-realization theory

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan

1987-01-01

A unified approach is introduced using system-realization theory to derive and correlate modal-parameter-identification methods for flexible structures. Several different time-domain methods are analyzed and treated. A basic mathematical foundation is presented which provides insight into the field of modal-parameter identification for comparison and evaluation. The relation among various existing methods is established and discussed. This report serves as a starting point to stimulate additional research toward the unification of the many possible approaches for modal-parameter identification.

QUEST: Quality of Expert Systems (QUEST: Kwaliteit van Expertsystemen)

DTIC Science & Technology

1990-11-01

methods have been applied building intelligent systems. However, in the research literature there is much speculation about this subject. TNO report Page 37...Netherlands TNO Physics and Electronics organization for Laboratory applied scientifi. research A A2 5 6 0P.O0 Box 96864 AD-A2 5 620 2509 JG The...rights and obligations of contracting parties are subject to either the ’Standard Conditions for Research date: Instructions given to TNO’or the relevant

Cooperating knowledge-based systems

NASA Technical Reports Server (NTRS)

Feigenbaum, Edward A.; Buchanan, Bruce G.

1988-01-01

This final report covers work performed under Contract NCC2-220 between NASA Ames Research Center and the Knowledge Systems Laboratory, Stanford University. The period of research was from March 1, 1987 to February 29, 1988. Topics covered were as follows: (1) concurrent architectures for knowledge-based systems; (2) methods for the solution of geometric constraint satisfaction problems, and (3) reasoning under uncertainty. The research in concurrent architectures was co-funded by DARPA, as part of that agency's Strategic Computing Program. The research has been in progress since 1985, under DARPA and NASA sponsorship. The research in geometric constraint satisfaction has been done in the context of a particular application, that of determining the 3-D structure of complex protein molecules, using the constraints inferred from NMR measurements.

A MODIFIED LIGHT TRANSMISSION VISUALIZATION METHOD FOR DNAPL SATURATION MEASUREMENTS IN 2-D MODELS

EPA Science Inventory

In this research, a light transmission visualization (LTV) method was used to quantify dense non-aqueous phase liquids (DNAPL) saturation in two-dimensional (2-D), two fluid phase systems. The method is an expansion of earlier LTV methods and takes into account both absorption an...

The development of scientific identification theory to conduct operation research in education management

NASA Astrophysics Data System (ADS)

Hardhienata, S.

2017-01-01

Operations research is a general method used in the study and optimization of a system through modeling of the system. In the field of education, especially in education management, operations research has not been widely used. This paper gives an exposition of ideas about how operations research can be used to conduct research and optimization in the field of education management by developing SITOREM (Scientific Identification Theory for Operation Research in Education Management). To clarify the intent of the idea, an example of applying SITOREM to enhance the professional commitment of lecturers associated with achieving the vision of university will be described.

Correlation Research of Medical Security Management System Network Platform in Medical Practice

NASA Astrophysics Data System (ADS)

Jie, Wang; Fan, Zhang; Jian, Hao; Li-nong, Yu; Jun, Fei; Ping, Hao; Ya-wei, Shen; Yue-jin, Chang

Objective-The related research of medical security management system network in medical practice. Methods-Establishing network platform of medical safety management system, medical security network host station, medical security management system(C/S), medical security management system of departments and sections, comprehensive query, medical security disposal and examination system. Results-In medical safety management, medical security management system can reflect the hospital medical security problem, and can achieve real-time detection and improve the medical security incident detection rate. Conclusion-The application of the research in the hospital management implementation, can find hospital medical security hidden danger and the problems of medical disputes, and can help in resolving medical disputes in time and achieve good work efficiency, which is worth applying in the hospital practice.

Research on a Denial of Service (DoS) Detection System Based on Global Interdependent Behaviors in a Sensor Network Environment

PubMed Central

Song, Jae-gu; Jung, Sungmo; Kim, Jong Hyun; Seo, Dong Il; Kim, Seoksoo

2010-01-01

This research suggests a Denial of Service (DoS) detection method based on the collection of interdependent behavior data in a sensor network environment. In order to collect the interdependent behavior data, we use a base station to analyze traffic and behaviors among nodes and introduce methods of detecting changes in the environment with precursor symptoms. The study presents a DoS Detection System based on Global Interdependent Behaviors and shows the result of detecting a sensor carrying out DoS attacks through the test-bed. PMID:22163475

Research on power market technical analysis index system employing high-low matching mechanism

NASA Astrophysics Data System (ADS)

Li, Tao; Wang, Shengyu

2018-06-01

The power market trading technical analysis refers to a method that takes the bidding behavior of members in the power market as the research object, sums up some typical market rules and price trends by applying mathematical and logical methods, and finally can effectively assist members in the power market to make more reasonable trading decisions. In this paper, the following four indicators have been proposed: bidding price difference scale, extreme bidding price rate, dispersion of bidding price and monthly transaction satisfaction of electricity trading, which are the core of the index system.

Finite difference and Runge-Kutta methods for solving vibration problems

NASA Astrophysics Data System (ADS)

Lintang Renganis Radityani, Scolastika; Mungkasi, Sudi

2017-11-01

The vibration of a storey building can be modelled into a system of second order ordinary differential equations. If the number of floors of a building is large, then the result is a large scale system of second order ordinary differential equations. The large scale system is difficult to solve, and if it can be solved, the solution may not be accurate. Therefore, in this paper, we seek for accurate methods for solving vibration problems. We compare the performance of numerical finite difference and Runge-Kutta methods for solving large scale systems of second order ordinary differential equations. The finite difference methods include the forward and central differences. The Runge-Kutta methods include the Euler and Heun methods. Our research results show that the central finite difference and the Heun methods produce more accurate solutions than the forward finite difference and the Euler methods do.

CSM Testbed Development and Large-Scale Structural Applications

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Gillian, R. E.; Mccleary, Susan L.; Lotts, C. G.; Poole, E. L.; Overman, A. L.; Macy, S. C.

1989-01-01

A research activity called Computational Structural Mechanics (CSM) conducted at the NASA Langley Research Center is described. This activity is developing advanced structural analysis and computational methods that exploit high-performance computers. Methods are developed in the framework of the CSM Testbed software system and applied to representative complex structural analysis problems from the aerospace industry. An overview of the CSM Testbed methods development environment is presented and some new numerical methods developed on a CRAY-2 are described. Selected application studies performed on the NAS CRAY-2 are also summarized.

Advances in intelligent diagnosis methods for pulmonary ground-glass opacity nodules.

PubMed

Yang, Jing; Wang, Hailin; Geng, Chen; Dai, Yakang; Ji, Jiansong

2018-02-07

Pulmonary nodule is one of the important lesions of lung cancer, mainly divided into two categories of solid nodules and ground glass nodules. The improvement of diagnosis of lung cancer has significant clinical significance, which could be realized by machine learning techniques. At present, there have been a lot of researches focusing on solid nodules. But the research on ground glass nodules started late, and lacked research results. This paper summarizes the research progress of the method of intelligent diagnosis for pulmonary nodules since 2014. It is described in details from four aspects: nodular signs, data analysis methods, prediction models and system evaluation. This paper aims to provide the research material for researchers of the clinical diagnosis and intelligent analysis of lung cancer, and further improve the precision of pulmonary ground glass nodule diagnosis.

Enhancing Undergraduate Teaching and Research with a "Drosophila" Virginizing System

ERIC Educational Resources Information Center

Venema, Dennis R.

2006-01-01

Laboratory exercises using "Drosophila" crosses are an effective pedagogical method to complement traditional lecture and textbook presentations of genetics. Undergraduate thesis research is another common setting for using "Drosophila." A significant barrier to using "Drosophila" for undergraduate teaching or research is the time and skill…

Comprehensive rotorcraft analysis methods

NASA Technical Reports Server (NTRS)

Stephens, Wendell B.; Austin, Edward E.

1988-01-01

The development and application of comprehensive rotorcraft analysis methods in the field of rotorcraft technology are described. These large scale analyses and the resulting computer programs are intended to treat the complex aeromechanical phenomena that describe the behavior of rotorcraft. They may be used to predict rotor aerodynamics, acoustic, performance, stability and control, handling qualities, loads and vibrations, structures, dynamics, and aeroelastic stability characteristics for a variety of applications including research, preliminary and detail design, and evaluation and treatment of field problems. The principal comprehensive methods developed or under development in recent years and generally available to the rotorcraft community because of US Army Aviation Research and Technology Activity (ARTA) sponsorship of all or part of the software systems are the Rotorcraft Flight Simulation (C81), Dynamic System Coupler (DYSCO), Coupled Rotor/Airframe Vibration Analysis Program (SIMVIB), Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD), General Rotorcraft Aeromechanical Stability Program (GRASP), and Second Generation Comprehensive Helicopter Analysis System (2GCHAS).

A GPS-Based Pitot-Static Calibration Method Using Global Output-Error Optimization

NASA Technical Reports Server (NTRS)

Foster, John V.; Cunningham, Kevin

2010-01-01

Pressure-based airspeed and altitude measurements for aircraft typically require calibration of the installed system to account for pressure sensing errors such as those due to local flow field effects. In some cases, calibration is used to meet requirements such as those specified in Federal Aviation Regulation Part 25. Several methods are used for in-flight pitot-static calibration including tower fly-by, pacer aircraft, and trailing cone methods. In the 1990 s, the introduction of satellite-based positioning systems to the civilian market enabled new inflight calibration methods based on accurate ground speed measurements provided by Global Positioning Systems (GPS). Use of GPS for airspeed calibration has many advantages such as accuracy, ease of portability (e.g. hand-held) and the flexibility of operating in airspace without the limitations of test range boundaries or ground telemetry support. The current research was motivated by the need for a rapid and statistically accurate method for in-flight calibration of pitot-static systems for remotely piloted, dynamically-scaled research aircraft. Current calibration methods were deemed not practical for this application because of confined test range size and limited flight time available for each sortie. A method was developed that uses high data rate measurements of static and total pressure, and GPSbased ground speed measurements to compute the pressure errors over a range of airspeed. The novel application of this approach is the use of system identification methods that rapidly compute optimal pressure error models with defined confidence intervals in nearreal time. This method has been demonstrated in flight tests and has shown 2- bounds of approximately 0.2 kts with an order of magnitude reduction in test time over other methods. As part of this experiment, a unique database of wind measurements was acquired concurrently with the flight experiments, for the purpose of experimental validation of the optimization method. This paper describes the GPS-based pitot-static calibration method developed for the AirSTAR research test-bed operated as part of the Integrated Resilient Aircraft Controls (IRAC) project in the NASA Aviation Safety Program (AvSP). A description of the method will be provided and results from recent flight tests will be shown to illustrate the performance and advantages of this approach. Discussion of maneuver requirements and data reduction will be included as well as potential applications.

Developing a reliable signal wire attachment method for rail.

DOT National Transportation Integrated Search

2014-11-01

The goal of this project was to develop a better attachment method for rail signal wires to improve the reliability of signaling : systems. EWI conducted basic research into the failure mode of current attachment methods and developed and tested a ne...

Private and Public Sector Enterprise Resource Planning System Post-Implementation Practices: A Comparative Mixed Method Investigation

ERIC Educational Resources Information Center

Bachman, Charles A.

2010-01-01

While private sector organizations have implemented enterprise resource planning (ERP) systems since the mid 1990s, ERP implementations within the public sector lagged by several years. This research conducted a mixed method, comparative assessment of post "go-live" ERP implementations between public and private sector organization. Based on a…

Examining Teacher Evaluation Validity and Leadership Decision Making within a Standards-Based Evaluation System

ERIC Educational Resources Information Center

Kimball, Steven M.; Milanowski, Anthony

2009-01-01

Purpose: The article reports on a study of school leader decision making that examined variation in the validity of teacher evaluation ratings in a school district that has implemented a standards-based teacher evaluation system. Research Methods: Applying mixed methods, the study used teacher evaluation ratings and value-added student achievement…

Validation Methods Research for Fault-Tolerant Avionics and Control Systems: Working Group Meeting, 2

NASA Technical Reports Server (NTRS)

Gault, J. W. (Editor); Trivedi, K. S. (Editor); Clary, J. B. (Editor)

1980-01-01

The validation process comprises the activities required to insure the agreement of system realization with system specification. A preliminary validation methodology for fault tolerant systems documented. A general framework for a validation methodology is presented along with a set of specific tasks intended for the validation of two specimen system, SIFT and FTMP. Two major areas of research are identified. First, are those activities required to support the ongoing development of the validation process itself, and second, are those activities required to support the design, development, and understanding of fault tolerant systems.

Identifying Obstacles and Research Gaps of Telemedicine Projects: Approach for a State-of-the-Art Analysis.

PubMed

Harst, Lorenz; Timpel, Patrick; Otto, Lena; Wollschlaeger, Bastian; Richter, Peggy; Schlieter, Hannes

2018-01-01

This paper presents an approach for an evaluation of finished telemedicine projects using qualitative methods. Telemedicine applications are said to improve the performance of health care systems. While there are countless telemedicine projects, the vast majority never makes the threshold from testing to implementation and diffusion. Projects were collected from German project databases in the area of telemedicine following systematically developed criteria. In a testing phase, ten projects were subject to a qualitative content analysis to identify limitations, need for further research, and lessons learned. Using Mayring's method of inductive category development, six categories of possible future research were derived. Thus, the proposed method is an important contribution to diffusion and translation research regarding telemedicine, as it is applicable to a systematic research of databases.

Contextual Exploration of a New Family Caregiver Support Concept for Geriatric Settings Using a Participatory Health Research Strategy.

PubMed

Dorant, Elisabeth; Krieger, Theresia

2017-11-28

Family caregivers are the backbone of the long-term care support system within the home environment. Comprehensive caregiver support programs require collaboration and coordination within the system. A new public health concept, Vade Mecum, aims to harmonize and professionalize family caregiver support initiatives in geriatric care settings in the Euregion Maas-Rhine. Exploration of the new concept recently started in Germany to gain in-depth insight into current support and the needs of the geriatric care team and family caregivers. Within the context of an exploratory qualitative study, a participatory health research (PHR) strategy was applied to make optimal use of experience and knowledge from the system. Care professionals, engaged as co-researchers, were responsible for decisions about the research question, data collection methods and procedures of engaging family caregivers. A research team representing all professions within the geriatric department was formed. Research objectives were formulated and an appropriate mix of qualitative data collection methods consisting of interviews, focus groups and story-telling was chosen. Needs and expectations of the new concept, and practical solutions for involving family caregivers were discussed. A PHR strategy resulted in initiating a qualitative study in a geriatric care setting carried out by care professionals from the department. Knowledge was generated in a co-creative manner, and co-researchers were empowered. A comprehensive understanding of the system serves as a starting point for advancement of the new family caregiver concept.

Conflicting Epistemologies and Inference in Coupled Human and Natural Systems

NASA Astrophysics Data System (ADS)

Garcia, M. E.

2017-12-01

Last year, I presented a model that projects per capita water consumption based on changes in price, population, building codes, and water stress salience. This model applied methods from hydrological science and engineering to relationships both within and beyond their traditional scope. Epistemologically, the development of mathematical models of natural or engineered systems is objectivist while research examining relationships between observations, perceptions and action is commonly constructivist or subjectivist. Drawing on multiple epistemologies is common in, and perhaps central to, the growing fields of coupled human and natural systems, and socio-hydrology. Critically, these philosophical perspectives vary in their view of the nature of the system as mechanistic, adaptive or constructed, and the split between aleatory and epistemic uncertainty. Interdisciplinary research is commonly cited as a way to address the critical and domain crossing challenge of sustainability as synthesis across perspectives can offer a more comprehensive view of system dynamics. However, combining methods and concepts from multiple ontologies and epistemologies can introduce contradictions into the logic of inference. These contractions challenge the evaluation of research products and the implications for practical application of research findings are not fully understood. Reflections on the evaluation, application, and generalization of the water consumption model described above are used to ground these broader questions and offer thoughts on the way forward.

Correlation of Managers' Value Systems and Students' Moral Development in High Schools and Pre-University Centers

ERIC Educational Resources Information Center

Alavi, Hamid Reza; Rahimipoor, Tahereh

2010-01-01

The goal of this research was to understand the managers' value system, the students' moral development, and their relationship in the high schools and pre-universities of District One in Kerman City. The research method used was descriptive-correlational. The statistical population was composed of high school and pre-university managers and…

Communication and Research Skills in the Information Systems Curriculum: A Method of Assessment

ERIC Educational Resources Information Center

Lazarony, Paul J.; Driscoll, Donna A.

2010-01-01

Assessment of learning goals has become the norm in business programs in higher education across the country. This paper offers a methodology for the assessment of both communication skills and research skills within a curriculum of the Bachelor of Science in Information Systems Program. Program level learning goals assessed in this paper are: (1)…

Information Security Analysis: A Study to Analyze the Extent to Which Information Security Systems Can Be Utilized to Prevent Intoxicated Individuals from Driving

ERIC Educational Resources Information Center

Pierre, Joseph D.

2011-01-01

Information security systems (ISS) have been designed to protect assets from damages and from unauthorized access internally as well as externally. This research is promising similar protection from ISS methods that could prevent intoxicated individuals under the influence of alcohol from driving. However, previous research has shown significant…

Energize It! An Ecologically Integrated Approach to the Study of the Digestive System and Energy Acquisition.

ERIC Educational Resources Information Center

Derting, Terry L.

1992-01-01

Develops a research-oriented method of studying the digestive system that integrates species' ecology with the form and function of this system. Uses problem-posing, problem-probing, and peer persuasion. Presents information for mammalian systems. (27 references) (MKR)

ERDA/Lewis research center photovoltaic systems test facility

NASA Technical Reports Server (NTRS)

Forestieri, A. F.; Johnson, J. A.; Knapp, W. D.; Rigo, H.; Stover, J.; Suhay, R.

1977-01-01

A national photovoltaic power systems test facility (of initial 10-kW peak power rating) is described. It consists of a solar array to generate electrical power, test-hardware for several alternate methods of power conversion, electrical energy storage systems, and an instrumentation and data acquisition system.

Force control compensation method with variable load stiffness and damping of the hydraulic drive unit force control system

NASA Astrophysics Data System (ADS)

Kong, Xiangdong; Ba, Kaixian; Yu, Bin; Cao, Yuan; Zhu, Qixin; Zhao, Hualong

2016-05-01

Each joint of hydraulic drive quadruped robot is driven by the hydraulic drive unit (HDU), and the contacting between the robot foot end and the ground is complex and variable, which increases the difficulty of force control inevitably. In the recent years, although many scholars researched some control methods such as disturbance rejection control, parameter self-adaptive control, impedance control and so on, to improve the force control performance of HDU, the robustness of the force control still needs improving. Therefore, how to simulate the complex and variable load characteristics of the environment structure and how to ensure HDU having excellent force control performance with the complex and variable load characteristics are key issues to be solved in this paper. The force control system mathematic model of HDU is established by the mechanism modeling method, and the theoretical models of a novel force control compensation method and a load characteristics simulation method under different environment structures are derived, considering the dynamic characteristics of the load stiffness and the load damping under different environment structures. Then, simulation effects of the variable load stiffness and load damping under the step and sinusoidal load force are analyzed experimentally on the HDU force control performance test platform, which provides the foundation for the force control compensation experiment research. In addition, the optimized PID control parameters are designed to make the HDU have better force control performance with suitable load stiffness and load damping, under which the force control compensation method is introduced, and the robustness of the force control system with several constant load characteristics and the variable load characteristics respectively are comparatively analyzed by experiment. The research results indicate that if the load characteristics are known, the force control compensation method presented in this paper has positive compensation effects on the load characteristics variation, i.e., this method decreases the effects of the load characteristics variation on the force control performance and enhances the force control system robustness with the constant PID parameters, thereby, the online PID parameters tuning control method which is complex needs not be adopted. All the above research provides theoretical and experimental foundation for the force control method of the quadruped robot joints with high robustness.

Third NASA Langley Formal Methods Workshop

NASA Technical Reports Server (NTRS)

Holloway, C. Michael (Compiler)

1995-01-01

This publication constitutes the proceedings of NASA Langley Research Center's third workshop on the application of formal methods to the design and verification of life-critical systems. This workshop brought together formal methods researchers, industry engineers, and academicians to discuss the potential of NASA-sponsored formal methods and to investigate new opportunities for applying these methods to industry problems. contained herein are copies of the material presented at the workshop, summaries of many of the presentations, a complete list of attendees, and a detailed summary of the Langley formal methods program. Much of this material is available electronically through the World-Wide Web via the following URL.

A Comprehension Based Analysis of Autoflight System Interfaces

NASA Technical Reports Server (NTRS)

Palmer, Everett (Technical Monitor); Polson, Peter G.

2003-01-01

This cooperative agreement supported Dr. Peter Polson's participation in two interrelated research programs. The first was the development of the Situation-Goal-Behavior (SGB) Model that is both a formal description of an avionics system's logic and behavior and a representation of a system that can be understood by avionics designers, pilots, and training developers. The second was the development of a usability inspection method based on an approximate model, RAFIV, of pilot interactions with the Flight Management System (FMS). The main purpose of this report is to integrate the two models and provide a context in order to better characterize the accomplishments of this research program. A major focus of both the previous and this Cooperative Agreement was the development of usability evaluation methods that can be effectively utilized during all phases of the design, development, and certification process of modern avionics systems. The current efforts to validate these methods have involved showing that they generate useful analyses of known operational and training problems with the current generation of avionics systems in modern commercial airliners. This report is organized into seven sections. Following the overview, the second section describes the Goal-Situation-Behavior model and its applications. The next section summarizes the foundations of the RAFIV model and describes the model in some detail. The contents of both these sections are derived from previous reports referenced in footnotes. The fourth section integrates these two models into a complete design evaluation and training development framework. The fifth section contains conclusions and possible future directions for research. References are in Section 6. Section 7 contains the titles and abstracts of the papers paper describing in more detail the results of this research program.

Electronic data collection options for practice-based research networks.

PubMed

Pace, Wilson D; Staton, Elizabeth W

2005-01-01

We wanted to describe the potential benefits and problems associated with selected electronic methods of collecting data within practice-based research networks (PBRNs). We considered a literature review, discussions with PBRN researchers, industry information, and personal experience. This article presents examples of selected PBRNs' use of electronic data collection. Collecting research data in the geographically dispersed PBRN environment requires considerable coordination to ensure completeness, accuracy, and timely transmission of the data, as well as a limited burden on the participants. Electronic data collection, particularly at the point of care, offers some potential solutions. Electronic systems allow use of transparent decision algorithms and improved data entry and data integrity. These systems may improve data transfer to the central office as well as tracking systems for monitoring study progress. PBRNs have available to them a wide variety of electronic data collection options, including notebook computers, tablet PCs, personal digital assistants (PDAs), and browser-based systems that operate independent of or over the Internet. Tablet PCs appear particularly advantageous for direct patient data collection in an office environment. PDAs work well for collecting defined data elements at the point of care. Internet-based systems work well for data collection that can be completed after the patient visit, as most primary care offices do not support Internet connectivity in examination rooms. When planning to collect data electronically, it is important to match the electronic data collection method to the study design. Focusing an inappropriate electronic data collection method onto users can interfere with accurate data gathering and may also anger PBRN members.

A Statistical Testing Approach for Quantifying Software Reliability; Application to an Example System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chu, Tsong-Lun; Varuttamaseni, Athi; Baek, Joo-Seok

The U.S. Nuclear Regulatory Commission (NRC) encourages the use of probabilistic risk assessment (PRA) technology in all regulatory matters, to the extent supported by the state-of-the-art in PRA methods and data. Although much has been accomplished in the area of risk-informed regulation, risk assessment for digital systems has not been fully developed. The NRC established a plan for research on digital systems to identify and develop methods, analytical tools, and regulatory guidance for (1) including models of digital systems in the PRAs of nuclear power plants (NPPs), and (2) incorporating digital systems in the NRC's risk-informed licensing and oversight activities.more » Under NRC's sponsorship, Brookhaven National Laboratory (BNL) explored approaches for addressing the failures of digital instrumentation and control (I and C) systems in the current NPP PRA framework. Specific areas investigated included PRA modeling digital hardware, development of a philosophical basis for defining software failure, and identification of desirable attributes of quantitative software reliability methods. Based on the earlier research, statistical testing is considered a promising method for quantifying software reliability. This paper describes a statistical software testing approach for quantifying software reliability and applies it to the loop-operating control system (LOCS) of an experimental loop of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL).« less

SIOS: A regional cooperation of international research infrastructures as a building block for an Arctic observing system

NASA Astrophysics Data System (ADS)

Holmen, K. J.; Lønne, O. J.

2016-12-01

The Svalbard Integrated Earth Observing System (SIOS) is a regional response to the Earth System Science (ESS) challenges posed by the Amsterdam Declaration on Global Change. SIOS is intended to develop and implement methods for how observational networks in the Arctic are to be designed in order to address such issues in a regional scale. SIOS builds on the extensive observation capacity and research installations already in place by many international institutions and will provide upgraded and relevant Observing Systems and Research Facilities of world class in and around Svalbard. It is a distributed research infrastructure set up to provide a regional observational system for long term measurements under a joint framework. As one of the large scale research infrastructure initiatives on the ESFRI roadmap (European Strategy Forum on Research Infrastructures), SIOS is now being implemented. The new research infrastructure organization, the SIOS Knowledge Center (SIOS-KC), is instrumental in developing methods and solutions for setting up its regional contribution to a systematically constructed Arctic observational network useful for global change studies. We will discuss cross-disciplinary research experiences some case studies and lessons learned so far. SIOS aims to provide an effective, easily accessible data management system which makes use of existing data handling systems in the thematic fields covered by SIOS. SIOS will, implement a data policy which matches the ambitions that are set for the new European research infrastructures, but at the same time be flexible enough to consider `historical' legacies. Given the substantial international presence in the Svalbard archipelago and the pan-Arctic nature of the issue, there is an opportunity to build SIOS further into a wider regional network and pan-Arctic context, ideally under the umbrella of the Sustaining Arctic Observing Networks (SAON) initiative. It is necessary to anchor SIOS strongly in a European context and connect it to extra-EU initiatives, in order to establish a pan-Arctic perspective. SIOS must develop and secure a robust communication with other bodies carrying out and funding research activities in the Arctic (observational as well as modelling) and actively promote a sustained Arctic observing network.

Futurescapes: evidence expectations in the USA for comparative effectiveness research for drugs in 2020.

PubMed

Messner, Donna A; Mohr, Penny; Towse, Adrian

2015-08-01

Explore key factors influencing future expectations for the production of evidence from comparative effectiveness research for drugs in the USA in 2020 and construct three plausible future scenarios. Semistructured key informant interviews and three rounds of modified Delphi with systematic scenario-building methods. Most influential key factors were: health delivery system integration; electronic health record development; exploitation of very large databases and mixed data sources; and proactive patient engagement in research. The scenario deemed most likely entailed uneven development of large integrated health systems with pockets of increased provider risk for patient care, enhanced data collection systems, changing incentives to do comparative effectiveness research and new opportunities for evidence generation partnerships.

Software-engineering challenges of building and deploying reusable problem solvers.

PubMed

O'Connor, Martin J; Nyulas, Csongor; Tu, Samson; Buckeridge, David L; Okhmatovskaia, Anna; Musen, Mark A

2009-11-01

Problem solving methods (PSMs) are software components that represent and encode reusable algorithms. They can be combined with representations of domain knowledge to produce intelligent application systems. A goal of research on PSMs is to provide principled methods and tools for composing and reusing algorithms in knowledge-based systems. The ultimate objective is to produce libraries of methods that can be easily adapted for use in these systems. Despite the intuitive appeal of PSMs as conceptual building blocks, in practice, these goals are largely unmet. There are no widely available tools for building applications using PSMs and no public libraries of PSMs available for reuse. This paper analyzes some of the reasons for the lack of widespread adoptions of PSM techniques and illustrate our analysis by describing our experiences developing a complex, high-throughput software system based on PSM principles. We conclude that many fundamental principles in PSM research are useful for building knowledge-based systems. In particular, the task-method decomposition process, which provides a means for structuring knowledge-based tasks, is a powerful abstraction for building systems of analytic methods. However, despite the power of PSMs in the conceptual modeling of knowledge-based systems, software engineering challenges have been seriously underestimated. The complexity of integrating control knowledge modeled by developers using PSMs with the domain knowledge that they model using ontologies creates a barrier to widespread use of PSM-based systems. Nevertheless, the surge of recent interest in ontologies has led to the production of comprehensive domain ontologies and of robust ontology-authoring tools. These developments present new opportunities to leverage the PSM approach.

Evaluation methods used on health information systems (HISs) in Iran and the effects of HISs on Iranian healthcare: a systematic review.

PubMed

Ahmadian, Leila; Nejad, Simin Salehi; Khajouei, Reza

2015-06-01

The most important goal of a health information system (HIS) is improvement of quality, effectiveness and efficiency of health services. To achieve this goal, health care systems should be evaluated continuously. The aim of this paper was to study the impacts of HISs in Iran and the methods used for their evaluation. We systematically searched all English and Persian papers evaluating health information systems in Iran that were indexed in SID, Magiran, Iran medex, PubMed and Embase databases until June 2013. A data collection form was designed to extract required data such as types of systems evaluated, evaluation methods and tools. In this study, 53 out of 1103 retrieved articles were selected as relevant and reviewed by the authors. This study indicated that 28 studies used questionnaires to evaluate the system and in 27 studies the study instruments were distributed within a research population. In 26 papers the researchers collected the information by means of interviews, observations, heuristic evaluation and the review of documents and records. The main effects of the evaluated systems in health care settings were improving quality of services, reducing time, increasing accessibility to information, reducing costs and decreasing medical errors. Evaluation of health information systems is central to their development and enhancement, and to understanding their effect on health and health services. Despite numerous evaluation methods available, the reviewed studies used a limited number of methods to evaluate HIS. Additionally, the studies mainly discussed the positive effects of HIS on health care services. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Software-engineering challenges of building and deploying reusable problem solvers

PubMed Central

O’CONNOR, MARTIN J.; NYULAS, CSONGOR; TU, SAMSON; BUCKERIDGE, DAVID L.; OKHMATOVSKAIA, ANNA; MUSEN, MARK A.

2012-01-01

Problem solving methods (PSMs) are software components that represent and encode reusable algorithms. They can be combined with representations of domain knowledge to produce intelligent application systems. A goal of research on PSMs is to provide principled methods and tools for composing and reusing algorithms in knowledge-based systems. The ultimate objective is to produce libraries of methods that can be easily adapted for use in these systems. Despite the intuitive appeal of PSMs as conceptual building blocks, in practice, these goals are largely unmet. There are no widely available tools for building applications using PSMs and no public libraries of PSMs available for reuse. This paper analyzes some of the reasons for the lack of widespread adoptions of PSM techniques and illustrate our analysis by describing our experiences developing a complex, high-throughput software system based on PSM principles. We conclude that many fundamental principles in PSM research are useful for building knowledge-based systems. In particular, the task–method decomposition process, which provides a means for structuring knowledge-based tasks, is a powerful abstraction for building systems of analytic methods. However, despite the power of PSMs in the conceptual modeling of knowledge-based systems, software engineering challenges have been seriously underestimated. The complexity of integrating control knowledge modeled by developers using PSMs with the domain knowledge that they model using ontologies creates a barrier to widespread use of PSM-based systems. Nevertheless, the surge of recent interest in ontologies has led to the production of comprehensive domain ontologies and of robust ontology-authoring tools. These developments present new opportunities to leverage the PSM approach. PMID:23565031

Proposal for research and education: joint lectures and practicals on central nervous system anatomy and physiology.

PubMed

Kageyama, Ikuo; Yoshimura, Ken; Satoh, Yoshihide; Nanayakkara, Chinthani D; Pallegama, Ranjith W; Iwasaki, Shin-Ichi

2016-07-01

We coordinated anatomy and physiology lectures and practicals to facilitate an integrated understanding of morphology and function in a basic medical science program for dental students and to reduce the time spent on basic science education. This method is a means to provide the essential information and skills in less time. The overall impression was that the practice of joint central nervous system lectures and practicals was an efficient method for students, which suggests that joint lectures might also be useful for clinical subjects. About two-thirds of students felt that the joint anatomy and physiology lecture on the central nervous system was useful and necessary in understanding the relationship between morphology and function, at least for this subject. One-third of students were neutral on the effectiveness of this method. However, the survey results suggest that improvements are needed in the method and timing of joint lectures and practicals. The present teaching approach can be further improved by conducting combined lectures in which the form and function of anatomic structures are presented by the relevant departments during the same lecture. Finally, joint lecturers and practicals offer an opportunity to increase student understanding of the importance of new research findings by the present authors and other researchers.

Evaluation of the Program Effectiveness of Research Competence Development in Prospective Elementary School Teachers

ERIC Educational Resources Information Center

Khan, Natalya N.; Kolumbayeva, Sholpan Zh.; Karsybayeva, Raissa K.; Nabuova, Roza A.; Kurmanbekova, Manshuk B.; Syzdykbayeva, Aigul Dzh.

2016-01-01

To develop research competence in prospective teachers, a system of methods for diagnostics and formation of this competence in prospective elementary school teachers in the training process is designed. To diagnose the research competence, a series of techniques were used that allow subtle evaluation of each competence research component:…

Computational methods and software systems for dynamics and control of large space structures

NASA Technical Reports Server (NTRS)

Park, K. C.; Felippa, C. A.; Farhat, C.; Pramono, E.

1990-01-01

This final report on computational methods and software systems for dynamics and control of large space structures covers progress to date, projected developments in the final months of the grant, and conclusions. Pertinent reports and papers that have not appeared in scientific journals (or have not yet appeared in final form) are enclosed. The grant has supported research in two key areas of crucial importance to the computer-based simulation of large space structure. The first area involves multibody dynamics (MBD) of flexible space structures, with applications directed to deployment, construction, and maneuvering. The second area deals with advanced software systems, with emphasis on parallel processing. The latest research thrust in the second area, as reported here, involves massively parallel computers.

COLLECTION SYSTEM SOLIDS CONTROL: OVERVIEW OF AN EPA WET-WEATHER FLOW RESEARCH PROGRAM

EPA Science Inventory

This paper presents an historical overview of the sewer-solids control projects conducted by the Wet-Weather Flow Research Program of the US EPA. Research includes studies of the causes of sewer-solids deposition and development/evaluation of control methods that can prevent sewe...

Particle models for discrete element modeling of bulk grain properties of wheat kernels

USDA-ARS?s Scientific Manuscript database

Recent research has shown the potential of discrete element method (DEM) in simulating grain flow in bulk handling systems. Research has also revealed that simulation of grain flow with DEM requires establishment of appropriate particle models for each grain type. This research completes the three-p...

The Role of Research in Making Interactive Products Effective.

ERIC Educational Resources Information Center

Rossi, Robert J.

1986-01-01

Argues that research and development (R&D) methods should be utilized to develop new technologies for training and retailing and describes useful research tools--critical incident methodology, task analysis, performance recording. Discussion covers R&D applications to interactive systems development in the areas of product need, customer…

Structural Dynamics Branch research and accomplishments for FY 1990

NASA Technical Reports Server (NTRS)

1991-01-01

Presented here is a collection of FY 1990 research highlights from the Structural Dynamics Branch at the NASA Lewis Research Center. Highlights are from the branch's major work areas: aeroelasticity, vibration control, dynamic systems, and computational structural methods. A listing is given of FY 1990 branch publications.

Applications of Operations Research Techniques in Tufts University Libraries.

ERIC Educational Resources Information Center

Rouse, William B., Ed.

This collection of papers is based on projects done in conjunction with a senior level/graduate course, "Applications of Operations Research Techniques in Systems Engineering." These seven papers describe research studies which utilized user surveys and/or statistical methods to analyze various library operations. The papers are…

Novel 3D/VR interactive environment for MD simulations, visualization and analysis.

PubMed

Doblack, Benjamin N; Allis, Tim; Dávila, Lilian P

2014-12-18

The increasing development of computing (hardware and software) in the last decades has impacted scientific research in many fields including materials science, biology, chemistry and physics among many others. A new computational system for the accurate and fast simulation and 3D/VR visualization of nanostructures is presented here, using the open-source molecular dynamics (MD) computer program LAMMPS. This alternative computational method uses modern graphics processors, NVIDIA CUDA technology and specialized scientific codes to overcome processing speed barriers common to traditional computing methods. In conjunction with a virtual reality system used to model materials, this enhancement allows the addition of accelerated MD simulation capability. The motivation is to provide a novel research environment which simultaneously allows visualization, simulation, modeling and analysis. The research goal is to investigate the structure and properties of inorganic nanostructures (e.g., silica glass nanosprings) under different conditions using this innovative computational system. The work presented outlines a description of the 3D/VR Visualization System and basic components, an overview of important considerations such as the physical environment, details on the setup and use of the novel system, a general procedure for the accelerated MD enhancement, technical information, and relevant remarks. The impact of this work is the creation of a unique computational system combining nanoscale materials simulation, visualization and interactivity in a virtual environment, which is both a research and teaching instrument at UC Merced.

Novel 3D/VR Interactive Environment for MD Simulations, Visualization and Analysis

PubMed Central

Doblack, Benjamin N.; Allis, Tim; Dávila, Lilian P.

2014-01-01

The increasing development of computing (hardware and software) in the last decades has impacted scientific research in many fields including materials science, biology, chemistry and physics among many others. A new computational system for the accurate and fast simulation and 3D/VR visualization of nanostructures is presented here, using the open-source molecular dynamics (MD) computer program LAMMPS. This alternative computational method uses modern graphics processors, NVIDIA CUDA technology and specialized scientific codes to overcome processing speed barriers common to traditional computing methods. In conjunction with a virtual reality system used to model materials, this enhancement allows the addition of accelerated MD simulation capability. The motivation is to provide a novel research environment which simultaneously allows visualization, simulation, modeling and analysis. The research goal is to investigate the structure and properties of inorganic nanostructures (e.g., silica glass nanosprings) under different conditions using this innovative computational system. The work presented outlines a description of the 3D/VR Visualization System and basic components, an overview of important considerations such as the physical environment, details on the setup and use of the novel system, a general procedure for the accelerated MD enhancement, technical information, and relevant remarks. The impact of this work is the creation of a unique computational system combining nanoscale materials simulation, visualization and interactivity in a virtual environment, which is both a research and teaching instrument at UC Merced. PMID:25549300

Range and mission scheduling automation using combined AI and operations research techniques

NASA Technical Reports Server (NTRS)

Arbabi, Mansur; Pfeifer, Michael

1987-01-01

Ground-based systems for Satellite Command, Control, and Communications (C3) operations require a method for planning, scheduling and assigning the range resources such as: antenna systems scattered around the world, communications systems, and personnel. The method must accommodate user priorities, last minute changes, maintenance requirements, and exceptions from nominal requirements. Described are computer programs which solve 24 hour scheduling problems, using heuristic algorithms and a real time interactive scheduling process.

[Research & development on computer expert system for forensic bones estimation].

PubMed

Zhao, Jun-ji; Zhang, Jan-zheng; Liu, Nin-guo

2005-08-01

To build an expert system for forensic bones estimation. By using the object oriented method, employing statistical data of forensic anthropology, combining the statistical data frame knowledge representation with productions and also using the fuzzy matching and DS evidence theory method. Software for forensic estimation of sex, age and height with opened knowledge base was designed. This system is reliable and effective, and it would be a good assistant of the forensic technician.

Kentucky DOE EPSCoR Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grulke, Eric; Stencel, John

2011-09-13

The KY DOE EPSCoR Program supports two research clusters. The Materials Cluster uses unique equipment and computational methods that involve research expertise at the University of Kentucky and University of Louisville. This team determines the physical, chemical and mechanical properties of nanostructured materials and examines the dominant mechanisms involved in the formation of new self-assembled nanostructures. State-of-the-art parallel computational methods and algorithms are used to overcome current limitations of processing that otherwise are restricted to small system sizes and short times. The team also focuses on developing and applying advanced microtechnology fabrication techniques and the application of microelectrornechanical systems (MEMS)more » for creating new materials, novel microdevices, and integrated microsensors. The second research cluster concentrates on High Energy and Nuclear Physics. lt connects research and educational activities at the University of Kentucky, Eastern Kentucky University and national DOE research laboratories. Its vision is to establish world-class research status dedicated to experimental and theoretical investigations in strong interaction physics. The research provides a forum, facilities, and support for scientists to interact and collaborate in subatomic physics research. The program enables increased student involvement in fundamental physics research through the establishment of graduate fellowships and collaborative work.« less

Instructional Methods for Neuroscience in Nurse Anesthesia Graduate Programs: A Survey of Educational Programs

DTIC Science & Technology

1999-10-01

Instructional Methods 4 December 5, 1998). Taught simultaneously with the Human Anatomy course, the neuroscience courses clinically orient the students...drama. His medical writings showed penetrating and often accurate observations on human anatomy , including the nervous system. He established the...Pathophysiology, Advanced Anesthesia Courses, Pharmacology and Human Anatomy . Research Question # 2 The second research question was What are the

Trust of Population within Social Relations System of the Population: A Case Study of Nasleg Administration in the Republic of Sakha (Yakutia)

ERIC Educational Resources Information Center

Mikhaylova, Anna; Popova, Liudmila

2016-01-01

The research consists in studying the level of population's trust in nasleg administration (in the administrative-territorial unit) of MS "Khatyryksky nasleg" of Namsky ulus using the case study. The leading research methods for the problem are empirical methods that allow revealing the level of population's trust in administration. The…

Challenges in Computational Social Modeling and Simulation for National Security Decision Making

DTIC Science & Technology

2011-06-01

This study is grounded within a system-activity theory , a logico-philosophical model of interdisciplinary research [13, 14], the concepts of social...often a difficult challenge. Ironically, social science research methods , such as ethnography , may be tremendously helpful in designing these...social sciences. Moreover, CSS projects draw on knowledge and methods from other fields of study , including graph theory , information visualization

Rail-highway crossing accident prediction research results - FY80

DOT National Transportation Integrated Search

1981-01-01

This report presents the results of research performed at the : Transportation Systems Center (TSC) dealing with mathematical : methods of predicting accidents at rail-highway crossings. The : work consists of three parts : Part I - Revised DOT Accid...

Developing Organs On-a-Chip: Chemical Safety Research Collaborators Provide Research Review

EPA Pesticide Factsheets

Risk assessors must understand how chemicals impact human systems, including complex tissues and organs. Unfortunately, there are huge data gaps in this area, and current testing methods are costly and time-consuming.

Patient Accounting Systems: Are They Fit with the Users' Requirements?

PubMed Central

Ayatollahi, Haleh; Nazemi, Zahra

2016-01-01

Objectives A patient accounting system is a subsystem of a hospital information system. This system like other information systems should be carefully designed to be able to meet users' requirements. The main aim of this research was to investigate users' requirements and to determine whether current patient accounting systems meet users' needs or not. Methods This was a survey study, and the participants were the users of six patient accounting systems used in 24 teaching hospitals. A stratified sampling method was used to select the participants (n = 216). The research instruments were a questionnaire and a checklist. The mean value of ≥3 showed the importance of each data element and the capability of the system. Results Generally, the findings showed that the current patient accounting systems had some weaknesses and were able to meet between 70% and 80% of users' requirements. Conclusions The current patient accounting systems need to be improved to be able to meet users' requirements. This approach can also help to provide hospitals with more usable and reliable financial information. PMID:26893945

The Joint Experiment for Crop Assessment and Monitoring (JECAM) Initiative: Developing methods and best practices for global agricultural monitoring

NASA Astrophysics Data System (ADS)

Champagne, C.; Jarvis, I.; Defourny, P.; Davidson, A.

2014-12-01

Agricultural systems differ significantly throughout the world, making a 'one size fits all' approach to remote sensing and monitoring of agricultural landscapes problematic. The Joint Experiment for Crop Assessment and Monitoring (JECAM) was established in 2009 to bring together the global scientific community to work towards a set of best practices and recommendations for using earth observation data to map, monitor and report on agricultural productivity globally across an array of diverse agricultural systems. These methods form the research and development component of the Group on Earth Observation Global Agricultural Monitoring (GEOGLAM) initiative to harmonize global monitoring efforts and increase market transparency. The JECAM initiative brings together researchers from a large number of globally distributed, well monitored agricultural test sites that cover a range of crop types, cropping systems and climate regimes. Each test site works independently as well as together across multiple sites to test methods, sensors and field data collection techniques to derive key agricultural parameters, including crop type, crop condition, crop yield and soil moisture. The outcome of this project will be a set of best practices that cover the range of remote sensing monitoring and reporting needs, including satellite data acquisition, pre-processing techniques, information retrieval and ground data validation. These outcomes provide the research and development foundation for GEOGLAM and will help to inform the development of the GEOGLAM "system of systems" for global agricultural monitoring. The outcomes of the 2014 JECAM science meeting will be discussed as well as examples of methods being developed by JECAM scientists.

GIS Application Management for Disabled People

NASA Astrophysics Data System (ADS)

Tongkaw, Sasalak

2017-08-01

This research aimed to develop and design Geographical Information Systems (GIS) for facilitating disabled people by presenting some useful disabled information on the Google Map. The map could provide information about disabled types of people such as blind, deaf and physical movement. This research employed the Multiview 2 theory and method to plan and find out the problems in real world situation. This research used many designing data structure methods such as Data Flow Diagram, and ER-Diagram. The research focused into two parts: server site and client site which included the interface for Web-based application. The clear information of disable people on the map was useful for facilitating disabled people to find some useful information. In addition, it provided specialized data for company and government officers for managing and planning local facilities for disabled people in the cities. The disable could access the system through the Internet access at any time by using mobile or portable devices.

Somebody’s Children or Nobody’s Children? How the Sociological Perspective Could Enliven Research on Foster Care

PubMed Central

Wildeman, Christopher; Waldfogel, Jane

2014-01-01

Social scientists have long been concerned about how the fortunes of parents affect their children, with acute interest in the most marginalized children. Yet little sociological research considers children in foster care. In this review, we take a three-pronged approach to show why this inattention is problematic. First, we provide overviews of the history of the foster care system and how children end up in foster care, as well as an estimate of how many children ever enter foster care. Second, we review research on the factors that shape the risk of foster care placement and foster care caseloads and how foster care affects children. We close by discussing how a sociological perspective and methodological orientation—ranging from ethnographic observation to longitudinal mixed methods research, demographic methods, and experimental studies—can foster new knowledge around the foster care system and the families it affects. PMID:25431518

Lessons Learned from Development of De-identification System for Biomedical Research in a Korean Tertiary Hospital

PubMed Central

Shin, Soo-Yong; Lyu, Yongman; Shin, Yongdon; Choi, Hyo Joung; Park, Jihyun; Kim, Woo-Sung

2013-01-01

Objectives The Korean government has enacted two laws, namely, the Personal Information Protection Act and the Bioethics and Safety Act to prevent the unauthorized use of medical information. To protect patients' privacy by complying with governmental regulations and improve the convenience of research, Asan Medical Center has been developing a de-identification system for biomedical research. Methods We reviewed Korean regulations to define the scope of the de-identification methods and well-known previous biomedical research platforms to extract the functionalities of the systems. Based on these review results, we implemented necessary programs based on the Asan Medical Center Information System framework which was built using the Microsoft. NET Framework and C#. Results The developed de-identification system comprises three main components: a de-identification tool, a search tool, and a chart review tool. The de-identification tool can substitute a randomly assigned research ID for a hospital patient ID, remove the identifiers in the structured format, and mask them in the unstructured format, i.e., texts. This tool achieved 98.14% precision and 97.39% recall for 6,520 clinical notes. The search tool can find the number of patients which satisfies given search criteria. The chart review tool can provide de-identified patient's clinical data for review purposes. Conclusions We found that a clinical data warehouse was essential for successful implementation of the de-identification system, and this system should be tightly linked to an electronic Institutional Review Board system for easy operation of honest brokers. Additionally, we found that a secure cloud environment could be adopted to protect patients' privacy more thoroughly. PMID:23882415

Modeling a hierarchical structure of factors influencing exploitation policy for water distribution systems using ISM approach

NASA Astrophysics Data System (ADS)

Jasiulewicz-Kaczmarek, Małgorzata; Wyczółkowski, Ryszard; Gładysiak, Violetta

2017-12-01

Water distribution systems are one of the basic elements of contemporary technical infrastructure of urban and rural areas. It is a complex engineering system composed of transmission networks and auxiliary equipment (e.g. controllers, checkouts etc.), scattered territorially over a large area. From the water distribution system operation point of view, its basic features are: functional variability, resulting from the need to adjust the system to temporary fluctuations in demand for water and territorial dispersion. The main research questions are: What external factors should be taken into account when developing an effective water distribution policy? Does the size and nature of the water distribution system significantly affect the exploitation policy implemented? These questions have shaped the objectives of research and the method of research implementation.

Assessing an Introduction to Systems Thinking

ERIC Educational Resources Information Center

Monroe, Martha C.; Plate, Richard R.; Colley, Lara

2015-01-01

This research study investigated the learning outcomes of a brief systems thinking intervention at the undergraduate level. A pre/post experimental design (n = 50) was used to address two primary questions: (1) Can a brief introduction to systems thinking improve students' understanding of systems thinking? and (2) Which teaching method (of…

[Bias of results in clinical research due to method of informed consent].

PubMed

Appels, C W Y

2007-03-24

Research ethics committees increasingly demand that investigators use an opt-in method (prior informed consent) to recruit their potential participants. Recent research has shown that opt-in systems of recruitment increase the response bias and reduce response rates. People willing to participate seem to find it burdensome to opt in. In contrast to this, public concern about an opt-out approach is minimal and will probably be outweighed by the potential harm caused by biased results from opt-in approaches. Concerns about protecting the rights of the individual should not override the importance of recruiting patients in medical research.

Achieving integration in mixed methods designs-principles and practices.

PubMed

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.

Comparison of initial perturbation methods for the mesoscale ensemble prediction system of the Meteorological Research Institute for the WWRP Beijing 2008 Olympics Research and Development Project (B08RDP)

NASA Astrophysics Data System (ADS)

Saito, Kazuo; Hara, Masahiro; Kunii, Masaru; Seko, Hiromu; Yamaguchi, Munehiko

2011-05-01

Different initial perturbation methods for the mesoscale ensemble prediction were compared by the Meteorological Research Institute (MRI) as a part of the intercomparison of mesoscale ensemble prediction systems (EPSs) of the World Weather Research Programme (WWRP) Beijing 2008 Olympics Research and Development Project (B08RDP). Five initial perturbation methods for mesoscale ensemble prediction were developed for B08RDP and compared at MRI: (1) a downscaling method of the Japan Meteorological Agency (JMA)'s operational one-week EPS (WEP), (2) a targeted global model singular vector (GSV) method, (3) a mesoscale model singular vector (MSV) method based on the adjoint model of the JMA non-hydrostatic model (NHM), (4) a mesoscale breeding growing mode (MBD) method based on the NHM forecast and (5) a local ensemble transform (LET) method based on the local ensemble transform Kalman filter (LETKF) using NHM. These perturbation methods were applied to the preliminary experiments of the B08RDP Tier-1 mesoscale ensemble prediction with a horizontal resolution of 15 km. To make the comparison easier, the same horizontal resolution (40 km) was employed for the three mesoscale model-based initial perturbation methods (MSV, MBD and LET). The GSV method completely outperformed the WEP method, confirming the advantage of targeting in mesoscale EPS. The GSV method generally performed well with regard to root mean square errors of the ensemble mean, large growth rates of ensemble spreads throughout the 36-h forecast period, and high detection rates and high Brier skill scores (BSSs) for weak rains. On the other hand, the mesoscale model-based initial perturbation methods showed good detection rates and BSSs for intense rains. The MSV method showed a rapid growth in the ensemble spread of precipitation up to a forecast time of 6 h, which suggests suitability of the mesoscale SV for short-range EPSs, but the initial large growth of the perturbation did not last long. The performance of the MBD method was good for ensemble prediction of intense rain with a relatively small computing cost. The LET method showed similar characteristics to the MBD method, but the spread and growth rate were slightly smaller and the relative operating characteristic area skill score and BSS did not surpass those of MBD. These characteristic features of the five methods were confirmed by checking the evolution of the total energy norms and their growth rates. Characteristics of the initial perturbations obtained by four methods (GSV, MSV, MBD and LET) were examined for the case of a synoptic low-pressure system passing over eastern China. With GSV and MSV, the regions of large spread were near the low-pressure system, but with MSV, the distribution was more concentrated on the mesoscale disturbance. On the other hand, large-spread areas were observed southwest of the disturbance in MBD and LET. The horizontal pattern of LET perturbation was similar to that of MBD, but the amplitude of the LET perturbation reflected the observation density.

Stochastic and deterministic multiscale models for systems biology: an auxin-transport case study.

PubMed

Twycross, Jamie; Band, Leah R; Bennett, Malcolm J; King, John R; Krasnogor, Natalio

2010-03-26

Stochastic and asymptotic methods are powerful tools in developing multiscale systems biology models; however, little has been done in this context to compare the efficacy of these methods. The majority of current systems biology modelling research, including that of auxin transport, uses numerical simulations to study the behaviour of large systems of deterministic ordinary differential equations, with little consideration of alternative modelling frameworks. In this case study, we solve an auxin-transport model using analytical methods, deterministic numerical simulations and stochastic numerical simulations. Although the three approaches in general predict the same behaviour, the approaches provide different information that we use to gain distinct insights into the modelled biological system. We show in particular that the analytical approach readily provides straightforward mathematical expressions for the concentrations and transport speeds, while the stochastic simulations naturally provide information on the variability of the system. Our study provides a constructive comparison which highlights the advantages and disadvantages of each of the considered modelling approaches. This will prove helpful to researchers when weighing up which modelling approach to select. In addition, the paper goes some way to bridging the gap between these approaches, which in the future we hope will lead to integrative hybrid models.

Mission Systems Open Architecture Science and Technology (MOAST) program

NASA Astrophysics Data System (ADS)

Littlejohn, Kenneth; Rajabian-Schwart, Vahid; Kovach, Nicholas; Satterthwaite, Charles P.

2017-04-01

The Mission Systems Open Architecture Science and Technology (MOAST) program is an AFRL effort that is developing and demonstrating Open System Architecture (OSA) component prototypes, along with methods and tools, to strategically evolve current OSA standards and technical approaches, promote affordable capability evolution, reduce integration risk, and address emerging challenges [1]. Within the context of open architectures, the program is conducting advanced research and concept development in the following areas: (1) Evolution of standards; (2) Cyber-Resiliency; (3) Emerging Concepts and Technologies; (4) Risk Reduction Studies and Experimentation; and (5) Advanced Technology Demonstrations. Current research includes the development of methods, tools, and techniques to characterize the performance of OMS data interconnection methods for representative mission system applications. Of particular interest are the OMS Critical Abstraction Layer (CAL), the Avionics Service Bus (ASB), and the Bulk Data Transfer interconnects, as well as to develop and demonstrate cybersecurity countermeasures techniques to detect and mitigate cyberattacks against open architecture based mission systems and ensure continued mission operations. Focus is on cybersecurity techniques that augment traditional cybersecurity controls and those currently defined within the Open Mission System and UCI standards. AFRL is also developing code generation tools and simulation tools to support evaluation and experimentation of OSA-compliant implementations.

Participatory action as a research method with public health nurses.

PubMed

Cusack, Cheryl; Cohen, Benita; Mignone, Javier; Chartier, Mariette J; Lutfiyya, Zana

2018-02-28

This article explores and describes participatory action research (PAR) as a preferred method in addressing nursing practice issues. This is the first study that used PAR with public health nurses (PHNs) in Canada to develop a professional practice model. Participatory action research is a sub-category of action research that incorporates feminist and critical theory with foundations in the field of social psychology. For nurses, critical analysis of long-established beliefs and practices through PAR contributes to emancipatory knowledge regarding the impact of traditional hierarchies on their practice. This study used participatory action, a non-traditional but systematic research method, which assisted participants to develop a solution to a long-standing organizational issue. The stages of generating concerns, participatory action, acting on concerns, reflection and evaluation were implemented from 2012 - 2013 in an urban Canadian city, to develop a professional practice model for PHNs. Four sub-themes specific to PAR are discussed. These are "participatory action research engaged PHNs in development of a professional practice model;" "the participatory action research cycles of "Look, Think, Act" expanded participants' views;" "participatory action research increased awareness of organizational barriers;" and "participatory action research promoted individual empowerment and system transformation." This study resulted in individual and system change that may not have been possible without the use of PAR. The focus was engagement of participants and recognition of their lived experience, which facilitated PHNs' empowerment, leadership and consciousness-raising. © 2018 The Authors. Journal of Advanced Nursing Published by John Wiley & Sons Ltd.

[Research and Design of a System for Detecting Automated External Defbrillator Performance Parameters].

PubMed

Wang, Kewu; Xiao, Shengxiang; Jiang, Lina; Hu, Jingkai

2017-09-30

In order to regularly detect the performance parameters of automated external defibrillator (AED), to make sure it is safe before using the instrument, research and design of a system for detecting automated external defibrillator performance parameters. According to the research of the characteristics of its performance parameters, combing the STM32's stability and high speed with PWM modulation control, the system produces a variety of ECG normal and abnormal signals through the digital sampling methods. Completed the design of the hardware and software, formed a prototype. This system can accurate detect automated external defibrillator discharge energy, synchronous defibrillation time, charging time and other key performance parameters.

NICA project management information system

NASA Astrophysics Data System (ADS)

Bashashin, M. V.; Kekelidze, D. V.; Kostromin, S. A.; Korenkov, V. V.; Kuniaev, S. V.; Morozov, V. V.; Potrebenikov, Yu. K.; Trubnikov, G. V.; Philippov, A. V.

2016-09-01

The science projects growth, changing of the efficiency criteria during the project implementation require not only increasing of the management specialization level but also pose the problem of selecting the effective planning methods, monitoring of deadlines and interaction of participants involved in research projects. This paper is devoted to choosing the project management information system for the new heavy-ion collider NICA (Nuclotron based Ion Collider fAcility). We formulate the requirements for the project management information system with taking into account the specifics of the Joint Institute for Nuclear Research (JINR, Dubna, Russia) as an international intergovernmental research organization, which is developed on the basis of a flexible and effective information system for the NICA project management.

In-house validation study of the DuPont Qualicon BAX system Q7 instrument with the BAX system PCR Assay for Salmonella (modification of AOAC Official Method 2003.09 and AOAC Research Institute Performance-Tested Method 100201).

PubMed

Tice, George; Andaloro, Bridget; White, H Kirk; Bolton, Lance; Wang, Siqun; Davis, Eugene; Wallace, Morgan

2009-01-01

In 2006, DuPont Qualicon introduced the BAX system Q7 instrument for use with its assays. To demonstrate the equivalence of the new and old instruments, a validation study was conducted using the BAX system PCR Assay for Salmonella, AOAC Official Method 2003.09, on three food types. The foods were simultaneously analyzed with the BAX system Q7 instrument and either the U.S. Food and Drug Administration Bacteriological Analytical Manual or the U.S. Department of Agriculture-Food Safety and Inspection Service Microbiology Laboratory Guidebook reference method for detecting Salmonella. Comparable performance between the BAX system and the reference methods was observed. Of the 75 paired samples analyzed, 39 samples were positive by both the BAX system and reference methods, and 36 samples were negative by both the BAX system and reference methods, demonstrating 100% correlation. Inclusivity and exclusivity for the BAX system Q7 instrument were also established by testing 50 Salmonella strains and 20 non-Salmonella isolates. All Salmonella strains returned positive results, and all non-Salmonella isolates returned a negative response.

Evaluation of ground motion scaling methods for analysis of structural systems

USGS Publications Warehouse

O'Donnell, A. P.; Beltsar, O.A.; Kurama, Y.C.; Kalkan, E.; Taflanidis, A.A.

2011-01-01

Ground motion selection and scaling comprises undoubtedly the most important component of any seismic risk assessment study that involves time-history analysis. Ironically, this is also the single parameter with the least guidance provided in current building codes, resulting in the use of mostly subjective choices in design. The relevant research to date has been primarily on single-degree-of-freedom systems, with only a few studies using multi-degree-of-freedom systems. Furthermore, the previous research is based solely on numerical simulations with no experimental data available for the validation of the results. By contrast, the research effort described in this paper focuses on an experimental evaluation of selected ground motion scaling methods based on small-scale shake-table experiments of re-configurable linearelastic and nonlinear multi-story building frame structure models. Ultimately, the experimental results will lead to the development of guidelines and procedures to achieve reliable demand estimates from nonlinear response history analysis in seismic design. In this paper, an overview of this research effort is discussed and preliminary results based on linear-elastic dynamic response are presented. ?? ASCE 2011.

Information science team

NASA Technical Reports Server (NTRS)

Billingsley, F.

1982-01-01

Concerns are expressed about the data handling aspects of system design and about enabling technology for data handling and data analysis. The status, contributing factors, critical issues, and recommendations for investigations are listed for data handling, rectification and registration, and information extraction. Potential supports to individual P.I., research tasks, systematic data system design, and to system operation. The need for an airborne spectrometer class instrument for fundamental research in high spectral and spatial resolution is indicated. Geographic information system formatting and labelling techniques, very large scale integration, and methods for providing multitype data sets must also be developed.

Research on SaaS and Web Service Based Order Tracking

NASA Astrophysics Data System (ADS)

Jiang, Jianhua; Sheng, Buyun; Gong, Lixiong; Yang, Mingzhong

To solve the order tracking of across enterprises in Dynamic Virtual Enterprise (DVE), a SaaS and web service based order tracking solution was designed by analyzing the order management process in DVE. To achieve the system, the SaaS based architecture of data management on order tasks manufacturing states was constructed, and the encapsulation method of transforming application system into web service was researched. Then the process of order tracking in the system was given out. Finally, the feasibility of this study was verified by the development of a prototype system.

Art and science in health care research: pushing at open doors or locked in institutions?

PubMed

Freshwater, Dawn; Cahill, Jane; Walsh, Elizabeth; Muncey, Tessa; Esterhuizen, Philip

2012-09-01

Research methods are usually dictated and driven by the research question. In the context of research in "closed" systems--for example, offender health settings--it is imperative that the research question takes into consideration the context in which the research is located. Conducting research that has action, transformation, and creativity at its heart is a significant challenge in closed cultures, for both the researcher and the researched. Using two exemplars, we question whether researchers should adopt a safe approach to researching these closed cultures and to what extent they should engage in methodological tensions and ethical dilemmas that provoke and support reflection on change. By reflecting on our previous research studies, we aim not so much to provide a definitive answer to this question but to suggest that researchers give careful consideration to the methods appropriate to both the context of the research and its purpose.

Methods of Model Reduction for Large-Scale Biological Systems: A Survey of Current Methods and Trends.

PubMed

Snowden, Thomas J; van der Graaf, Piet H; Tindall, Marcus J

2017-07-01

Complex models of biochemical reaction systems have become increasingly common in the systems biology literature. The complexity of such models can present a number of obstacles for their practical use, often making problems difficult to intuit or computationally intractable. Methods of model reduction can be employed to alleviate the issue of complexity by seeking to eliminate those portions of a reaction network that have little or no effect upon the outcomes of interest, hence yielding simplified systems that retain an accurate predictive capacity. This review paper seeks to provide a brief overview of a range of such methods and their application in the context of biochemical reaction network models. To achieve this, we provide a brief mathematical account of the main methods including timescale exploitation approaches, reduction via sensitivity analysis, optimisation methods, lumping, and singular value decomposition-based approaches. Methods are reviewed in the context of large-scale systems biology type models, and future areas of research are briefly discussed.

Digital signal processing at Bell Labs-Foundations for speech and acoustics research

NASA Astrophysics Data System (ADS)

Rabiner, Lawrence R.

2004-05-01

Digital signal processing (DSP) is a fundamental tool for much of the research that has been carried out of Bell Labs in the areas of speech and acoustics research. The fundamental bases for DSP include the sampling theorem of Nyquist, the method for digitization of analog signals by Shannon et al., methods of spectral analysis by Tukey, the cepstrum by Bogert et al., and the FFT by Tukey (and Cooley of IBM). Essentially all of these early foundations of DSP came out of the Bell Labs Research Lab in the 1930s, 1940s, 1950s, and 1960s. This fundamental research was motivated by fundamental applications (mainly in the areas of speech, sonar, and acoustics) that led to novel design methods for digital filters (Kaiser, Golden, Rabiner, Schafer), spectrum analysis methods (Rabiner, Schafer, Allen, Crochiere), fast convolution methods based on the FFT (Helms, Bergland), and advanced digital systems used to implement telephony channel banks (Jackson, McDonald, Freeny, Tewksbury). This talk summarizes the key contributions to DSP made at Bell Labs, and illustrates how DSP was utilized in the areas of speech and acoustics research. It also shows the vast, worldwide impact of this DSP research on modern consumer electronics.

Operations Monitoring Assistant System Design

DTIC Science & Technology

1986-07-01

Logic. Artificial Inteligence 25(1)::75-94. January.18. 41 -Nils J. Nilsson. Problem-Solving Methods In Artificli Intelligence. .klcG raw-Hill B3ook...operations monitoring assistant (OMA) system is designed that combines operations research, artificial intelligence, and human reasoning techniques and...KnowledgeCraft (from Carnegie Group), and 5.1 (from Teknowledze). These tools incorporate the best methods of applied artificial intelligence, and

A Two-State Study of Family Child Care Engagement in Quality Rating and Improvement Systems: A Mixed-Methods Analysis

ERIC Educational Resources Information Center

Hallam, Rena; Hooper, Alison; Bargreen, Kaitlin; Buell, Martha; Han, Myae

2017-01-01

Research Findings: The current study is a mixed-methods investigation of family child care provider participation in voluntary Quality Rating and Improvement Systems (QRIS) in 2 states. Study 1 is an analysis of matched QRIS and child care licensing administrative data extracted from both states in May, 2014. Poverty and population density…

Implementation of a Model-Tracing-Based Learning Diagnosis System to Promote Elementary Students' Learning in Mathematics

ERIC Educational Resources Information Center

Chu, Yian-Shu; Yang, Haw-Ching; Tseng, Shian-Shyong; Yang, Che-Ching

2014-01-01

Of all teaching methods, one-to-one human tutoring is the most powerful method for promoting learning. To achieve this aim and reduce teaching load, researchers developed intelligent tutoring systems (ITSs) to employ one-to-one tutoring (Aleven, McLaren, & Sewall, 2009; Aleven, McLaren, Sewall, & Koedinger, 2009; Anderson, Corbett,…

[Construction of research system for processing mechanism of traditional Chinese medicine based on chemical composition transformation combined with intestinal absorption barrier].

PubMed

Sun, E; Xu, Feng-Juan; Zhang, Zhen-Hai; Wei, Ying-Jie; Tan, Xiao-Bin; Cheng, Xu-Dong; Jia, Xiao-Bin

2014-02-01

Based on practice of Epimedium processing mechanism for many years and integrated multidisciplinary theory and technology, this paper initially constructs the research system for processing mechanism of traditional Chinese medicine based on chemical composition transformation combined with intestinal absorption barrier, which to form an innovative research mode of the " chemical composition changes-biological transformation-metabolism in vitro and in vivo-intestinal absorption-pharmacokinetic combined pharmacodynamic-pharmacodynamic mechanism". Combined with specific examples of Epimedium and other Chinese herbal medicine processing mechanism, this paper also discusses the academic thoughts, research methods and key technologies of this research system, which will be conducive to systematically reveal the modem scientific connotation of traditional Chinese medicine processing, and enrich the theory of Chinese herbal medicine processing.

Closed-Loop and Robust Control of Quantum Systems

PubMed Central

Wang, Lin-Cheng

2013-01-01

For most practical quantum control systems, it is important and difficult to attain robustness and reliability due to unavoidable uncertainties in the system dynamics or models. Three kinds of typical approaches (e.g., closed-loop learning control, feedback control, and robust control) have been proved to be effective to solve these problems. This work presents a self-contained survey on the closed-loop and robust control of quantum systems, as well as a brief introduction to a selection of basic theories and methods in this research area, to provide interested readers with a general idea for further studies. In the area of closed-loop learning control of quantum systems, we survey and introduce such learning control methods as gradient-based methods, genetic algorithms (GA), and reinforcement learning (RL) methods from a unified point of view of exploring the quantum control landscapes. For the feedback control approach, the paper surveys three control strategies including Lyapunov control, measurement-based control, and coherent-feedback control. Then such topics in the field of quantum robust control as H ∞ control, sliding mode control, quantum risk-sensitive control, and quantum ensemble control are reviewed. The paper concludes with a perspective of future research directions that are likely to attract more attention. PMID:23997680

Job and Workload Analysis System for Civil Servants in North Sulawesi Province, Indonesia

NASA Astrophysics Data System (ADS)

Krisnanda, M.; Mewengkang, A.; Rompas, P. T. D.; Togas, P. V.

2018-02-01

This study aims to create automation system to assist sub division of job analysis and workload of North Sulawesi, Indonesia in completing its annual tasks to record all civil servants. The method used in this research is prototyping where a system will be developed according to the revision supplied by the user. The result of this research is a system used to generate reports and calculations based on user filled forms. The result gathered from the interviews, users can make reports faster and easier. Users can also optimise reports on time using the built system.

The Panamanian health research system: a baseline analysis for the construction of a new phase

PubMed Central

2013-01-01

Background In Panama, the health research system has been strengthened during recent years by the development of new financing opportunities, promotion of scientific and technological activities, and initiation of human capital training to ultimately improve competitiveness. However, aligning this system with the population’s health needs is a significant challenge. This study was designed to characterize the National Health Research System in Panama, aiming to understand it within a local context to facilitate policymaking. Methods The study was based on the analysis of operative and functional components of the National Health Research System, characterized by four specific components: stewardship, financing, creation and maintenance of resources, and production and use of research results. The analysis was based on official documents from key local institutions in the areas of science, technology and innovation management, and health and health research, as well as bibliographic databases. Results Panama’s National Health Research System is characterized by the presence of only two biomedical research institutes and reduced research activity in hospitals and universities, ambivalent governance, a low critical mass of researchers, reduced capacity to recruit new researchers, poor scientific production, and insufficient investment in science and technology. Conclusions The present study illustrates an approach to the context of the Panamanian Health Research System which characterizes the system as insufficient to accomplish its operative role of generating knowledge for new health interventions and input for innovations. In turn, this analysis emphasizes the need to develop a National Health Research Policy, which should include longer-term plans and a strategy to overcome the asymmetries and gaps between the different actors and components of the current system. PMID:24007409

Usability evaluation of in-housed developed ERP system

NASA Astrophysics Data System (ADS)

Faisal, Chaudhry Muhammad Nadeem; Shakeel Faridi, Muhammad; Javed, Zahid

2011-10-01

Enterprise Resource Planning systems are the combination of different business IS (Information System) applications that are designed according to the organization requirements. Generally ERP systems are suffering from complex user interface issues. Recent research shows that there is a need for improvement concerning, the user interface from their perspectives. In order to design the software applications that are easy to use, memorize and apply to new problems, we must know the users philosophy and something about learning, reminiscence and problems solving. The Usability engineering is the only way to study the deeds of users while interacting with ERP (Enterprise Resource & Planning). This paper will focus on the users' experiences view of financial module in ERP system. The HCI research method, explicitly survey questionnaire method was adopted to gather users understanding in order to evaluate the selected modules for in-housed ERP system. The study involved group of users from two industries, the results can not be generalized as a whole. The study was first time successfully applied Usability evaluation on in-housed ERP in local industry (Masood Textile Mills, Interloop Ltd) in Pakistan. The results may hopefully opened-up an area of research and methodology that could provide considerable further benefits to Industry in developments of Industrial information systems.

Methodological issues in interviewing families in family nursing research.

PubMed

Astedt-Kurki, P; Paavilainen, E; Lehti, K

2001-07-01

The aim of this study is to discuss what methodological problems can be met in family research with one family member as an interviewee speaking on behalf of the whole family and, vice versa, what is the meaning of having multiple family members or the whole family unit as informants. Family nursing research is part of multidisciplinary research with families. It is a basis for family nursing and contributes to research, especially from the perspective of family welfare and its promotion. Family nursing research generates knowledge concerning families' and family members' wellbeing and experiences and expectations of nursing and health care. The examination of methodological problems while pursuing family research is based on two studies conducted in Finland. Quantitative methods add to the general knowledge of families. Qualitative methods are well suited to the study of family experiences. Family interviews performed for research purposes differ from interviews aiming at caring for families. They aim at obtaining knowledge of families on a general level so as to improve family nursing. Family research has to be looked at as a whole. It faces many challenges such as the definition of the family, gaining access, methods of data collection and data management. A family is a complex system and research with families need flexible, sensitive and practical methods. Family research should also aim at developing new methods for data collection and analysis.

Applying systems biology methods to the study of human physiology in extreme environments

PubMed Central

2013-01-01

Systems biology is defined in this review as ‘an iterative process of computational model building and experimental model revision with the aim of understanding or simulating complex biological systems’. We propose that, in practice, systems biology rests on three pillars: computation, the omics disciplines and repeated experimental perturbation of the system of interest. The number of ethical and physiologically relevant perturbations that can be used in experiments on healthy humans is extremely limited and principally comprises exercise, nutrition, infusions (e.g. Intralipid), some drugs and altered environment. Thus, we argue that systems biology and environmental physiology are natural symbionts for those interested in a system-level understanding of human biology. However, despite excellent progress in high-altitude genetics and several proteomics studies, systems biology research into human adaptation to extreme environments is in its infancy. A brief description and overview of systems biology in its current guise is given, followed by a mini review of computational methods used for modelling biological systems. Special attention is given to high-altitude research, metabolic network reconstruction and constraint-based modelling. PMID:23849719

Study on sampling of continuous linear system based on generalized Fourier transform

NASA Astrophysics Data System (ADS)

Li, Huiguang

2003-09-01

In the research of signal and system, the signal's spectrum and the system's frequency characteristic can be discussed through Fourier Transform (FT) and Laplace Transform (LT). However, some singular signals such as impulse function and signum signal don't satisfy Riemann integration and Lebesgue integration. They are called generalized functions in Maths. This paper will introduce a new definition -- Generalized Fourier Transform (GFT) and will discuss generalized function, Fourier Transform and Laplace Transform under a unified frame. When the continuous linear system is sampled, this paper will propose a new method to judge whether the spectrum will overlap after generalized Fourier transform (GFT). Causal and non-causal systems are studied, and sampling method to maintain system's dynamic performance is presented. The results can be used on ordinary sampling and non-Nyquist sampling. The results also have practical meaning on research of "discretization of continuous linear system" and "non-Nyquist sampling of signal and system." Particularly, condition for ensuring controllability and observability of MIMO continuous systems in references 13 and 14 is just an applicable example of this paper.

The Utilization of Navy People-Related RDT&E (Research, Development, Test, and Evaluation): Fiscal Year 1983.

DTIC Science & Technology

1984-06-01

emostraion. Tese eserch ool wee deignted and experimental demonstrations wre successfully con- for demonstrations. These research tools wre designated ...Topics 4.02 Instructional Systems Design Methodology Instructional Systems Development and Effectiveness Evaluation .................................... 1...6 53 0 0 67w Report Page 10.07 Human Performance Variables/Factors 10.08 Man-Machine Design Methodology Computer Assisted Methods for Human

Travel into a fairy land: a critique of modern qualitative and mixed methods psychologies.

PubMed

Toomela, Aaro

2011-03-01

In this article modern qualitative and mixed methods approaches are criticized from the standpoint of structural-systemic epistemology. It is suggested that modern qualitative methodologies suffer from several fallacies: some of them are grounded on inherently contradictory epistemology, the others ask scientific questions after the methods have been chosen, conduct studies inductively so that not only answers but even questions are often supposed to be discovered, do not create artificial situations and constraints on study-situations, are adevelopmental by nature, study not the external things and phenomena but symbols and representations--often the object of studies turns out to be the researcher rather than researched, rely on ambiguous data interpretation methods based to a large degree on feelings and opinions, aim to understand unique which is theoretically impossible, or have theoretical problems with sampling. Any one of these fallacies would be sufficient to exclude any possibility to achieve structural-systemic understanding of the studied things and phenomena. It also turns out that modern qualitative methodologies share several fallacies with the quantitative methodology. Therefore mixed methods approaches are not able to overcome the fundamental difficulties that characterize mixed methods taken separately. It is proposed that structural-systemic methodology that dominated psychological thought in the pre-WWII continental Europe is philosophically and theoretically better grounded than the other methodologies that can be distinguished in psychology today. Future psychology should be based on structural-systemic methodology.

A novel method for finding the initial structure parameters of optical systems via a genetic algorithm

NASA Astrophysics Data System (ADS)

Jun, LIU; Huang, Wei; Hongjie, Fan

2016-02-01

A novel method for finding the initial structure parameters of an optical system via the genetic algorithm (GA) is proposed in this research. Usually, optical designers start their designs from the commonly used structures from a patent database; however, it is time consuming to modify the patented structures to meet the specification. A high-performance design result largely depends on the choice of the starting point. Accordingly, it would be highly desirable to be able to calculate the initial structure parameters automatically. In this paper, a method that combines a genetic algorithm and aberration analysis is used to determine an appropriate initial structure of an optical system. We use a three-mirror system as an example to demonstrate the validity and reliability of this method. On-axis and off-axis telecentric three-mirror systems are obtained based on this method.

NASA researchers in gold control room during an F-15 HiDEC flight

NASA Technical Reports Server (NTRS)

1993-01-01

NASA researchers monitor equipment in the mission control Gold room at the Dryden Flight Research Center, Edwards, California, during a flight of an F-15 Highly Integrated Digital Electronic Control (HIDEC) research aircraft. The system was developed on the F-15 to investigate and demonstrate methods of obtaining optimum aircraft performance. The major elements of HIDEC were a Digital Electronic Flight Control System (DEFCS), a Digital Electronic Engine Control (DEEC), an on-board general purpose computer, and an integrated architecture to allow all components to 'talk to each other.' Unlike standard F-15s, which have a mechanical and analog electronic flight control system, the HIDEC F-15 also had a dual-channel, fail-safe digital flight control system programmed in Pascal. It was linked to the Military Standard 1553B and a H009 data bus which tied all the other electronic systems together.

NASA researchers in gold control room during an F-15 HiDEC flight, John Orme and Gerard Schkolnik

NASA Technical Reports Server (NTRS)

1993-01-01

NASA researchers Gerard Schkolnik (left) and John Orme monitor equipment in the control room at the Dryden Flight Research Center, Edwards, California, during a flight of an F-15 Highly Integrated Digital Electronic Control (HIDEC) research aircraft. The system was developed on the F-15 to investigate and demonstrate methods of obtaining optimum aircraft performance. The major elements of HIDEC were a Digital Electronic Flight Control System (DEFCS), a Digital Electronic Engine Control (DEEC), an on-board general purpose computer, and an integrated architecture to allow all components to 'talk to each other.' Unlike standard F-15s, which have a mechanical and analog electronic flight control system, the HIDEC F-15 also had a dual-channel, fail-safe digital flight control system programmed in Pascal. It was linked to the Military Standard 1553B and a H009 data bus which tied all the other electronic systems together.

Operations research applications in nuclear energy

NASA Astrophysics Data System (ADS)

Johnson, Benjamin Lloyd

This dissertation consists of three papers; the first is published in Annals of Operations Research, the second is nearing submission to INFORMS Journal on Computing, and the third is the predecessor of a paper nearing submission to Progress in Nuclear Energy. We apply operations research techniques to nuclear waste disposal and nuclear safeguards. Although these fields are different, they allow us to showcase some benefits of using operations research techniques to enhance nuclear energy applications. The first paper, "Optimizing High-Level Nuclear Waste Disposal within a Deep Geologic Repository," presents a mixed-integer programming model that determines where to place high-level nuclear waste packages in a deep geologic repository to minimize heat load concentration. We develop a heuristic that increases the size of solvable model instances. The second paper, "Optimally Configuring a Measurement System to Detect Diversions from a Nuclear Fuel Cycle," introduces a simulation-optimization algorithm and an integer-programming model to find the best, or near-best, resource-limited nuclear fuel cycle measurement system with a high degree of confidence. Given location-dependent measurement method precisions, we (i) optimize the configuration of n methods at n locations of a hypothetical nuclear fuel cycle facility, (ii) find the most important location at which to improve method precision, and (iii) determine the effect of measurement frequency on near-optimal configurations and objective values. Our results correspond to existing outcomes but we obtain them at least an order of magnitude faster. The third paper, "Optimizing Nuclear Material Control and Accountability Measurement Systems," extends the integer program from the second paper to locate measurement methods in a larger, hypothetical nuclear fuel cycle scenario given fixed purchase and utilization budgets. This paper also presents two mixed-integer quadratic programming models to increase the precision of existing methods given a fixed improvement budget and to reduce the measurement uncertainty in the system while limiting improvement costs. We quickly obtain similar or better solutions compared to several intuitive analyses that take much longer to perform.

Training Students to Analyze Spatial and Temporal Heterogeneities in Reservoir and Seal Petrology, Mineralogy, and Geochemistry: Implications for CO{sub 2} Sequestration Prediction, Simulation, and Monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowen, Brenda

The objective of this project was to expose and train multiple students in geological tools that are essential to reservoir characterization and geologic sequestration including but not limited to advanced petrological methods, mineralogical methods, and geochemical methods; core analysis, and geophysical well-log interpretation. These efforts have included training of multiple students through geologically based curriculum and research using advanced petrological, mineralogical, and geochemical methods. In whole, over the last 3+ years, this award has supported 5,828 hours of student research, supporting the work of several graduate and undergraduate students. They have all received training directly related to ongoing CO{sub 2}more » sequestration demonstrations. The students have all conducted original scientific research on topics related to understanding the importance of lithological, textural, and compositional variability in formations that are being targeted as CO{sub 2} sequestration reservoirs and seals. This research was linked to the Mount Simon Sandstone reservoir and overlying Eau Claire Formation seal in the Illinois Basin- a system where over one million tons of CO{sub 2} are actively being injected with the first large-scale demonstration of anthropogenic CO{sub 2} storage in the U.S. Student projects focused specifically on 1) reservoir porosity characterization and evaluation, 2) petrographic, mineralogical, and geochemical evidence of fluid-related diagenesis in the caprock, 3) textural changes in reservoir samples exposed to experimental CO{sub 2} + brine conditions, 4) controls on spatial heterogeneity in composition and texture in both the reservoir and seal, 5) the implications of small-scale fractures within the reservoir, and 6) petrographic and stable isotope analyses of carbonates in the seal to understand the burial history of the system. The student-led research associated with this project provided real-time and hands-on experience with a relevant CO{sub 2} system, provided relevant information to the regional partnerships who are working within these formations, and provides more broadly applicable understanding and method development for other carbon capture and storage systems.« less