Information systems for administration, clinical documentation and quality assurance in an Austrian disease management programme.

PubMed

Beck, Peter; Truskaller, Thomas; Rakovac, Ivo; Bruner, Fritz; Zanettin, Dominik; Pieber, Thomas R

2009-01-01

5.9% of the Austrian population is affected by diabetes mellitus. Disease Management is a structured treatment approach that is suitable for application to the diabetes mellitus area and often is supported by information technology. This article describes the information systems developed and implemented in the Austrian disease management programme for type 2 diabetes. Several workflows for administration as well as for clinical documentation have been implemented utilizing the Austrian e-Health infrastructure. De-identified clinical data is available for creating feedback reports for providers and programme evaluation.

Power games: The political use of solar technology in northern Thailand

NASA Astrophysics Data System (ADS)

Green, Donna Lisa

This dissertation politicises and historically situates the transfer of an environmental technology to a less developed country, a transfer that has occurred under the rubric of sustainable development. The case study explores the social and political context of two solar battery charging station programmes selected to provide electrification in rural Northern Thailand beginning in the 1980s. It places these rural electrification programmes in the context of previous rural electrification policies in northern Thailand in the 1960s and 1970s which were driven by an explicitly state-serving agenda: an agenda that aimed to expand the centralised state's ability to pacify and control remote areas of the country. However, it is clear that the technology and implementation strategies selected for the new electrification programmes could not fulfil their community-serving objectives; furthermore, these systems could not meet the actual energy needs of the programmes' intended beneficiaries. I argue that we need to consider whether the objectives that motivated previous rural electrification programmes may be continuing to play a role in the promotion of these new rural electrification programmes, a motivation that would contradict the philosophy behind the choice of the solar battery charging stations. Specifically, I show how the new rural electrification strategy has been de-politicised through its framing within the sustainable development discourses. This thesis highlights how the rush to promote environmental technologies through the rubric of sustainable development may limit a proper consideration of the social and political dynamics that motivated these decisions, resulting in the uncritical justification of technology selection. Scholars have critiqued the social ramifications of, and the political motivations behind, earlier technocentric rural development strategies, showing how they can exacerbate social inequalities. I argue that in this situation, the alleged environmental benefits of using an environmental technology in a sustainable development programme may have served to shelter it from similar critique. The assessment reveals and emphasises the need to query the validity of the objectives motivating other technocentric rural development programmes that transfer environmental technologies as part of the practice of sustainable development.

Introducing new diagnostics into STI control programmes: the importance of programme science.

PubMed

Peeling, Rosanna W; Mabey, David; Ballard, Ronald C

2013-03-01

Many innovative diagnostic technologies will become commercially available over the next 5-10 years. These tests can potentially transform the diagnosis of sexually transmitted infections but their introduction into control programmes can be hampered by health system constraints, and political, cultural, socioeconomic and behavioural factors. We used the introduction of syphilis rapid tests to illustrate the importance of programme science to address the gap between accruing evidence of acceptable test performance and the complexity of programme design, implementation and evaluation of test deployment to address public health needs and improve patient-important outcomes.

Programming Programmable Logic Controller. High-Technology Training Module.

ERIC Educational Resources Information Center

Lipsky, Kevin

This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

Programmes of Educational Technology in China: Looking Backward, Thinking Forward

ERIC Educational Resources Information Center

Fuyin, Xu; Jianli, Jiao

2010-01-01

There is a history of programmes in educational technology in colleges and universities in China going back about 70 years. This paper briefly reviews the developmental history of the educational technology programme in China, elaborates the status-quo of the programme and looks ahead into the future trends of educational technology development in…

Disruptive technology for vector control: the Innovative Vector Control Consortium and the US Military join forces to explore transformative insecticide application technology for mosquito control programmes.

PubMed

Knapp, Jennifer; Macdonald, Michael; Malone, David; Hamon, Nicholas; Richardson, Jason H

2015-09-26

Malaria vector control technology has remained largely static for decades and there is a pressing need for innovative control tools and methodology to radically improve the quality and efficiency of current vector control practices. This report summarizes a workshop jointly organized by the Innovative Vector Control Consortium (IVCC) and the Armed Forces Pest Management Board (AFPMB) focused on public health pesticide application technology. Three main topics were discussed: the limitations with current tools and techniques used for indoor residual spraying (IRS), technology innovation to improve efficacy of IRS programmes, and truly disruptive application technology beyond IRS. The group identified several opportunities to improve application technology to include: insuring all IRS programmes are using constant flow valves and erosion resistant tips; introducing compression sprayer improvements that help minimize pesticide waste and human error; and moving beyond IRS by embracing the potential for new larval source management techniques and next generation technology such as unmanned "smart" spray systems. The meeting served to lay the foundation for broader collaboration between the IVCC and AFPMB and partners in industry, the World Health Organization, the Bill and Melinda Gates Foundation and others.

Functional safety for the Advanced Technology Solar Telescope

NASA Astrophysics Data System (ADS)

Bulau, Scott; Williams, Timothy R.

2012-09-01

Since inception, the Advanced Technology Solar Telescope (ATST) has planned to implement a facility-wide functional safety system to protect personnel from harm and prevent damage to the facility or environment. The ATST will deploy an integrated safety-related control system (SRCS) to achieve functional safety throughout the facility rather than relying on individual facility subsystems to provide safety functions on an ad hoc basis. The Global Interlock System (GIS) is an independent, distributed, facility-wide, safety-related control system, comprised of commercial off-the-shelf (COTS) programmable controllers that monitor, evaluate, and control hazardous energy and conditions throughout the facility that arise during operation and maintenance. The GIS has been designed to utilize recent advances in technology for functional safety plus revised national and international standards that allow for a distributed architecture using programmable controllers over a local area network instead of traditional hard-wired safety functions, while providing an equivalent or even greater level of safety. Programmable controllers provide an ideal platform for controlling the often complex interrelationships between subsystems in a modern astronomical facility, such as the ATST. A large, complex hard-wired relay control system is no longer needed. This type of system also offers greater flexibility during development and integration in addition to providing for expanded capability into the future. The GIS features fault detection, self-diagnostics, and redundant communications that will lead to decreased maintenance time and increased availability of the facility.

Technology Developments in Radiation-Hardened Electronics for Space Environments

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Howell, Joe T.

2008-01-01

The Radiation Hardened Electronics for Space Environments (RHESE) project consists of a series of tasks designed to develop and mature a broad spectrum of radiation hardened and low temperature electronics technologies. Three approaches are being taken to address radiation hardening: improved material hardness, design techniques to improve radiation tolerance, and software methods to improve radiation tolerance. Within these approaches various technology products are being addressed including Field Programmable Gate Arrays (FPGA), Field Programmable Analog Arrays (FPAA), MEMS, Serial Processors, Reconfigurable Processors, and Parallel Processors. In addition to radiation hardening, low temperature extremes are addressed with a focus on material and design approaches. System level applications for the RHESE technology products are discussed.

Spanish Earth Observation Satellite System

NASA Astrophysics Data System (ADS)

Borges, A.; Cerezo, F.; Fernandez, M.; Lomba, J.; Lopez, M.; Moreno, J.; Neira, A.; Quintana, C.; Torres, J.; Trigo, R.; Urena, J.; Vega, E.; Vez, E.

2010-12-01

The Spanish Ministry of Industry, Tourism and Trade (MITyC) and the Ministry of Defense (MoD) signed an agreement in 2007 for the development of a "Spanish Earth Observation Satellite System" based, in first instance, on two satellites: a high resolution optical satellite, called SEOSAT/Ingenio, and a radar satellite based on SAR technology, called SEOSAR/Paz. SEOSAT/Ingenio is managed by MITyC through the Centre for the Development of Industrial Technology (CDTI), with technical and contractual support from the European Space Agency (ESA). HISDESA T together with the Spanish Instituto Nacional de Técnica Aeroespacial (INTA, National Institute for Aerospace Technology) will be responsible for the in-orbit operation and the commercial operation of both satellites, and for the technical management of SEOSAR/Paz on behalf of the MoD. In both cases EADS CASA Espacio (ECE) is the prime contractor leading the industrial consortia. The ground segment development will be assigned to a Spanish consortium. This system is the most important contribution of Spain to the European Programme Global Monitoring for Environment and Security, GMES. This paper presents the Spanish Earth Observation Satellite System focusing on SEOSA T/Ingenio Programme and with special emphasis in the potential contribution to the ESA Third Party Missions Programme and to the Global Monitoring for Environment and Security initiative (GMES) Data Access.

Strategic considerations in Indian space programme—Towards maximising socio-economic benefits

NASA Astrophysics Data System (ADS)

Sridhara Murthi, K. R.; Madhusudan, H. N.

2008-07-01

Strategic thinking and planning have been the hallmarks of Indian space programme, whose objectives are sharply focused on deriving socio-economic benefits of space technology. The purpose of this paper is to identify various strategies, which played a role in different phases of the programme, contributing to social and economic outcomes and effectiveness. While self-reliant development of technological capacity and evaluation of applications with involvement of users formed the backbone of strategy in the initial phase of the programme, subsequent strategies were centred on development of organisational culture and systems, industry role and promotion of spin offs. Other strategies dealt with the response to challenges inherent in space endeavours in terms of risk management, sustainability, investments and long-term commitments, judicious make or buy decisions, safeguard of sensitive technologies, space commerce and finally harmonising international cooperation with national objectives. The strategies in the programme were consistently driven by a clear-cut vision and objectives to develop and use space technology in diverse areas where space systems become relevant for socio-economic development such as telecommunications and broadcasting, meteorology, disaster management support, remote sensing of natural and anthropogenic phenomena, and positioning and navigation services. This paper synthesises various studies and experiences in India in order to analyse strategies in the face of changes in technology, application needs and international policies. It also examines the effectiveness of these strategies in terms of economic and social costs and benefits. Based on the above analysis, a typical conceptual model for use of space for development is suggested.

The ESA TTP and Recent Spin-off Successes

NASA Astrophysics Data System (ADS)

Raitt, D.; Brisson, P.

2002-01-01

In the framework of its research and development activities, the European Space Agency (ESA) spends some 250m each year and, recognizing the enormous potential of the know-how developed within its R&D activities, set up a Technology Transfer Programme (TTP) some twelve years ago. Over the years, the Programme has achieved some remarkable results with 120 successful transfers of space technologies to the non-space sector; over 120m received by companies making the technologies available; some 15 new companies established as a direct result of exploiting technologies; nearly 2500 jobs created or saved in Europe; and a portfolio of some 300 (out of over 600) active space technologies available for transfer and licencing. Some of the more recent technologies which have been successfully transferred to the non-space sector include the Mamagoose baby safety pyjamas; a spectrographic system being used to compare colours in fabrics and textiles; Earth observation technology employed to assess remotely how much agrochemicals are being used by farmers; and the Dutch solar car, Nuna, which, using European space technologies, finished first in the 2001 World Solar Challenge breaking all records. The paper will give a brief overview of the ESA Technology Transfer Programme and describe some of its recent successful technology transfers.

Electronic health information system at an opioid treatment programme: roadblocks to implementation

PubMed Central

Louie, Ben; Kritz, Steven; Brown, Lawrence S.; Chu, Melissa; Madray, Charles; Zavala, Roberto

2012-01-01

Rationale Electronic health systems are commonly included in health care reform discussions. However, their embrace by the health care community has been slow. Methods At Addiction Research and Treatment Corporation, a methadone maintenance programme that also provides primary medical care, HIV medical care and case management, substance abuse counselling and vocational services, we describe our experience in implementing an electronic health information system that encompasses all of these areas. Results We describe the challenges and opportunities of this process in terms of change management, hierarchy of corporate objectives, process mastering, training issues, information technology governance, electronic security, and communication and collaboration. Conclusion This description may provide practical insights to other institutions seeking to pursue this technology. PMID:21414111

Electronic health information system at an opioid treatment programme: roadblocks to implementation.

PubMed

Louie, Ben; Kritz, Steven; Brown, Lawrence S; Chu, Melissa; Madray, Charles; Zavala, Roberto

2012-08-01

Electronic health systems are commonly included in health care reform discussions. However, their embrace by the health care community has been slow. At Addiction Research and Treatment Corporation, a methadone maintenance programme that also provides primary medical care, HIV medical care and case management, substance abuse counselling and vocational services, we describe our experience in implementing an electronic health information system that encompasses all of these areas. We describe the challenges and opportunities of this process in terms of change management, hierarchy of corporate objectives, process mastering, training issues, information technology governance, electronic security, and communication and collaboration. This description may provide practical insights to other institutions seeking to pursue this technology. © 2011 Blackwell Publishing Ltd.

Fault-Tolerant Software-Defined Radio on Manycore

NASA Technical Reports Server (NTRS)

Ricketts, Scott

2015-01-01

Software-defined radio (SDR) platforms generally rely on field-programmable gate arrays (FPGAs) and digital signal processors (DSPs), but such architectures require significant software development. In addition, application demands for radiation mitigation and fault tolerance exacerbate programming challenges. MaXentric Technologies, LLC, has developed a manycore-based SDR technology that provides 100 times the throughput of conventional radiationhardened general purpose processors. Manycore systems (30-100 cores and beyond) have the potential to provide high processing performance at error rates that are equivalent to current space-deployed uniprocessor systems. MaXentric's innovation is a highly flexible radio, providing over-the-air reconfiguration; adaptability; and uninterrupted, real-time, multimode operation. The technology is also compliant with NASA's Space Telecommunications Radio System (STRS) architecture. In addition to its many uses within NASA communications, the SDR can also serve as a highly programmable research-stage prototyping device for new waveforms and other communications technologies. It can also support noncommunication codes on its multicore processor, collocated with the communications workload-reducing the size, weight, and power of the overall system by aggregating processing jobs to a single board computer.

New developments in Indian space policies and programmes—The next five years

NASA Astrophysics Data System (ADS)

Sridhara Murthi, K. R.; Bhaskaranarayana, A.; Madhusudana, H. N.

2010-02-01

Over past four decades Indian space programme has systematically acquired capabilities in space technologies and implemented its programmes with a high level of focus on societal applications. It is developed into a multi-dimensional programme where its strategy is directed towards diverse stake holders and actors such as government, users and beneficiaries including general public, industrial suppliers as well as customers, academia and other space agencies/international organisations. Over the next five years, the Indian space programme has charted an ambitious set of policies and programmes that aim to enhance impacts on society. The major task is to enlarge and diversify the services delivered to a large section of population affected by income, connectivity and digital divides. While efficacy of application of space based systems have been proven in several fields such as tele-education, water resources management, improving productivity of land and out reaching quality health services and others, the crux of the problem is to evolve sustainable and scalable delivery mechanisms on a very large scale and extending over large geographical areas. Essentially the problem shifts from being predominately a technology problem to one of a composite of economic, cultural and social problems. Tackling such problems would need renewal of policies relating to commercial as well as public service systems. Major programmatic initiatives are planned in the next five years involving new and upgraded technologies to expand services from space to fill the gaps and to improve economic efficiency. Thrust is also given to science and exploration mission beyond Chandrayaan-1 and some initial steps for the participation in human space flight. This paper discusses the policy and strategy perspectives of the programmes planned by Indian Space Research Organisation over next five years.

Radiation-Hardened Circuitry Using Mask-Programmable Analog Arrays. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Britton, Jr., Charles L.; Ericson, Milton Nance; Bobrek, Miljko

As the recent accident at Fukushima Daiichi so vividly demonstrated, telerobotic technologies capable of withstanding high radiation environments need to be readily available to enable operations, repair, and recovery under severe accident scenarios where human entry is extremely dangerous or not possible. Telerobotic technologies that enable remote operation in high dose rate environments have undergone revolutionary improvement over the past few decades. However, much of this technology cannot be employed in nuclear power environments due the radiation sensitivity of the electronics and the organic insulator materials currently in use. This is the final report of the activities involving the NEETmore » 2 project Radiation Hardened Circuitry Using Mask-Programmable Analog Arrays. We present a detailed functional block diagram of the proposed data acquisition system, the thought process leading to technical decisions, the implemented system, and the tested results from the systems. This system will be capable of monitoring at least three parameters of importance to nuclear reactor monitoring: temperature, radiation level, and pressure.« less

The United Nations programme on space applications: priority thematic areas

NASA Astrophysics Data System (ADS)

Haubold, H.

The Third United Nations Conference on the Exploration and Peaceful Uses of Outer Space (UNISPACE III) was held in 1999 with efforts to identify world wide benefits of developing space science and technology, particularly in the developing nations. One of the main vehicles to implement recommendations of UNISPACE III is the United Nations Programme on Space Applications of the Office for Outer Space Affairs at UN Headquarters in Vienna. Following a process of prioritization by Member States, the Programme focus its activities on (i) knowledge-based themes as space law and basic space science, (ii) application-based themes as disaster management, natural resources management, environmental monitoring, tele-health, and (iii) enabling technologies such as remote sensing satellites, communications satellites, global navigation satellite systems, and small satellites. Current activities of the Programme will be reviewed. Further information available at http://www.oosa.unvienna.org/sapidx.html

Monitoring grasshopper and locust habitats in Sahelian Africa using GIS and remote sensing technology

USGS Publications Warehouse

Tappan, G. Gray; Moore, Donald G.; Knauseberger, Walter I.

1991-01-01

Development programmes in Sahelian Africa are beginning to use geographic information system (GIS) technology. One of the GIS and remote sensing programmes introduced to the region in the late 1980s was the use of seasonal vegetation maps made from satellite data to support grasshopper and locust control. Following serious outbreaks of these pests in 1987, the programme addressed a critical need, by national and international crop protection organizations, to monitor site-specific dynamic vegetation conditions associated with grasshopper and locust breeding. The primary products used in assessing vegetation conditions were vegetation index (greenness) image maps derived from National Oceanic and Atmospheric Administration satellite imagery. Vegetation index data were integrated in a GIS with digital cartographic data of individual Sahelian countries. These near-real-time image maps were used regularly in 10 countries for locating potential grasshopper and locust habitats. The programme to monitor vegetation conditions is currently being institutionalized in the Sahel.

Information Retrieval Research and ESPRIT.

ERIC Educational Resources Information Center

Smeaton, Alan F.

1987-01-01

Describes the European Strategic Programme of Research and Development in Information Technology (ESPRIT), and its five programs: advanced microelectronics, software technology, advanced information processing, office systems, and computer integrated manufacturing. The emphasis on logic programming and ESPRIT as the European response to the…

Knowledge Based Artificial Augmentation Intelligence Technology: Next Step in Academic Instructional Tools for Distance Learning

ERIC Educational Resources Information Center

Crowe, Dale; LaPierre, Martin; Kebritchi, Mansureh

2017-01-01

With augmented intelligence/knowledge based system (KBS) it is now possible to develop distance learning applications to support both curriculum and administrative tasks. Instructional designers and information technology (IT) professionals are now moving from the programmable systems era that started in the 1950s to the cognitive computing era.…

Geothermal projects funded under the NER 300 programme - current state of development and knowledge gained

NASA Astrophysics Data System (ADS)

Shortall, Ruth; Uihlein, Andreas

2017-04-01

Introduction The NER 300 programme, managed by the European Commission is one of the largest funding programmes for innovative low-carbon energy demonstration projects. NER 300 is so called because it is funded from the sale of 300 million emission allowances from the new entrants' reserve (NER) set up for the third phase of the EU emissions trading system (ETS). The programme aims to successfully demonstrate environmentally safe carbon capture and storage (CCS) and innovative renewable energy (RES) technologies on a commercial scale with a view to scaling up production of low-carbon technologies in the EU. Consequently, it supports a wide range of CCS and RES technologies (bioenergy, concentrated solar power, photovoltaics, geothermal, wind, ocean, hydropower, and smart grids). Funded projects and the role of geothermal projects for the programme In total, about EUR 2.1 billion have been awarded through the programme's 2 calls for proposals (the first awarded in December 2012, the second in July 2014). The programme has awarded around EUR 70 million funding to 3 geothermal projects in Hungary, Croatia and France. The Croatian geothermal project will enter into operation during 2017 the Hungarian in 2018, and the French in 2020. Knowledge Sharing Knowledge sharing requirements are built into the legal basis of the programme as a critical tool to lower risks in bridging the transition to large-scale production of innovative renewable energy and CCS deployment. Projects have to submit annually to the European Commission relevant knowledge gained during that year in the implementation of their project. The relevant knowledge is aggregated and disseminated by the European Commission to industry, research, government, NGO and other interest groups and associations in order to provide a better understanding of the practical challenges that arise in the important step of scaling up technologies and operating them at commercial scale. The knowledge sharing of the NER 300 programme should lead to better planning and faster introduction of low carbon technologies in the future. Content of the presentation The presentation will introduce the geothermal projects that have been awarded funding (see Annex), including their state-of-play. Insights and knowledge gained from the projects that have entered into operation will be shown and discussed. Furthermore, the presentation will provide an overview of the NER 300 programme.

Perspectives for environment and health research in Horizon 2020: dark ages or golden era?

PubMed

Smolders, Roel; De Boever, Patrick

2014-11-01

The European Commission recently published the first calls for proposals for the Horizon 2020 (H2020) work programme for research and innovation. When browsing through the Health programme, it became apparent that the work programme made little reference to environmental health research. In this commentary we describe major milestones of environmental health research in previous European Framework Programmes and the policy shift that took place when preparing H2020. We introduce mobile health technologies as a niche innovation to reconcile the environmental health research arena with the H2020 programme that has a clear focus on ICT. The recent economic crises urged strong policy action to reinforce Europe's economic and innovation leadership. Market-driven and job-creating ambitions became primary goals of H2020. Environmental health-related keywords referring to, e.g. human biomonitoring, exposure assessment or exposome are absent in the current H2020-calls and this may suggest a lack of opportunities for environmental health researchers. Technologies related to mobile healthcare (mhealth) are rapidly maturing and offer new research and market opportunities. In a typically technology-pushed market, these sensor technologies however require validation by a third-party and implementation in large-scale public health monitoring studies. Also, issues related to data protection need further development to warrant user rights and privacy. If the European environmental health research arena succeeds in embracing these new mhealth sensor technologies, it may not only create an opportunity to play a role as a key innovation partner in health transition technologies, but it may also support authorities to realize a transition in our healthcare with a much bigger emphasis on a preventive and sustainable system. Copyright © 2014 Elsevier GmbH. All rights reserved.

Binary/Analog CCD Correlator Development.

DTIC Science & Technology

1981-07-01

architecture , design and performance of a general purpose, 1,024-stage, programmable transversal filter implemented in CCD/NMOS technology is described. The device features programmability of the reference signal, the filter length and weighting coefficient resolution. Off-ship circuitry is minimized by incorporating both analog and digital support circuitry, on-chip. This results in a monolithic analog signal processing system that has the flexibility to be operated in nine programmable configurations, from 1,024-stages by 1-bit, to 128-stages by 8-bits. The versatility

Field-programmable lab-on-a-chip based on microelectrode dot array architecture.

PubMed

Wang, Gary; Teng, Daniel; Lai, Yi-Tse; Lu, Yi-Wen; Ho, Yingchieh; Lee, Chen-Yi

2014-09-01

The fundamentals of electrowetting-on-dielectric (EWOD) digital microfluidics are very strong: advantageous capability in the manipulation of fluids, small test volumes, precise dynamic control and detection, and microscale systems. These advantages are very important for future biochip developments, but the development of EWOD microfluidics has been hindered by the absence of: integrated detector technology, standard commercial components, on-chip sample preparation, standard manufacturing technology and end-to-end system integration. A field-programmable lab-on-a-chip (FPLOC) system based on microelectrode dot array (MEDA) architecture is presented in this research. The MEDA architecture proposes a standard EWOD microfluidic component called 'microelectrode cell', which can be dynamically configured into microfluidic components to perform microfluidic operations of the biochip. A proof-of-concept prototype FPLOC, containing a 30 × 30 MEDA, was developed by using generic integrated circuits computer aided design tools, and it was manufactured with standard low-voltage complementary metal-oxide-semiconductor technology, which allows smooth on-chip integration of microfluidics and microelectronics. By integrating 900 droplet detection circuits into microelectrode cells, the FPLOC has achieved large-scale integration of microfluidics and microelectronics. Compared to the full-custom and bottom-up design methods, the FPLOC provides hierarchical top-down design approach, field-programmability and dynamic manipulations of droplets for advanced microfluidic operations.

A simple laser locking system based on a field-programmable gate array.

PubMed

Jørgensen, N B; Birkmose, D; Trelborg, K; Wacker, L; Winter, N; Hilliard, A J; Bason, M G; Arlt, J J

2016-07-01

Frequency stabilization of laser light is crucial in both scientific and industrial applications. Technological developments now allow analog laser stabilization systems to be replaced with digital electronics such as field-programmable gate arrays, which have recently been utilized to develop such locking systems. We have developed a frequency stabilization system based on a field-programmable gate array, with emphasis on hardware simplicity, which offers a user-friendly alternative to commercial and previous home-built solutions. Frequency modulation, lock-in detection, and a proportional-integral-derivative controller are programmed on the field-programmable gate array and only minimal additional components are required to frequency stabilize a laser. The locking system is administered from a host-computer which provides comprehensive, long-distance control through a versatile interface. Various measurements were performed to characterize the system. The linewidth of the locked laser was measured to be 0.7 ± 0.1 MHz with a settling time of 10 ms. The system can thus fully match laser systems currently in use for atom trapping and cooling applications.

A simple laser locking system based on a field-programmable gate array

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jørgensen, N. B.; Birkmose, D.; Trelborg, K.

Frequency stabilization of laser light is crucial in both scientific and industrial applications. Technological developments now allow analog laser stabilization systems to be replaced with digital electronics such as field-programmable gate arrays, which have recently been utilized to develop such locking systems. We have developed a frequency stabilization system based on a field-programmable gate array, with emphasis on hardware simplicity, which offers a user-friendly alternative to commercial and previous home-built solutions. Frequency modulation, lock-in detection, and a proportional-integral-derivative controller are programmed on the field-programmable gate array and only minimal additional components are required to frequency stabilize a laser. The lockingmore » system is administered from a host-computer which provides comprehensive, long-distance control through a versatile interface. Various measurements were performed to characterize the system. The linewidth of the locked laser was measured to be 0.7 ± 0.1 MHz with a settling time of 10 ms. The system can thus fully match laser systems currently in use for atom trapping and cooling applications.« less

Development of Educational Support System for Algorithm using Flowchart

NASA Astrophysics Data System (ADS)

Ohchi, Masashi; Aoki, Noriyuki; Furukawa, Tatsuya; Takayama, Kanta

Recently, an information technology is indispensable for the business and industrial developments. However, it has been a social problem that the number of software developers has been insufficient. To solve the problem, it is necessary to develop and implement the environment for learning the algorithm and programming language. In the paper, we will describe the algorithm study support system for a programmer using the flowchart. Since the proposed system uses Graphical User Interface(GUI), it will become easy for a programmer to understand the algorithm in programs.

Computerized Manufacturing Automation. Employment, Education, and the Workplace. Summary.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

The application of programmable automation (PA) offers new opportunities to enhance and streamline manufacturing processes. Five PA technologies are examined in this report: computer-aided design, robots, numerically controlled machine tools, flexible manufacturing systems, and computer-integrated manufacturing. Each technology is in a relatively…

Illinois Occupational Skill Standards: Information Technology Design/Build Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Design and Build Cluster (technical writer, programmer, system analyst, network architect, application product architect, network engineer, and database administrator). The skill standards define what an individual should know and the…

Reflections on the evolution of health technology assessment in Europe.

PubMed

Sorenson, Corinna; Chalkidou, Kalipso

2012-01-01

Health technology assessment (HTA) has assumed an increasing role in health systems in recent years, with many countries establishing agencies or programmes to evaluate health technology and other interventions to inform policy decisions and clinical practice. This paper reflects upon its development and evolution in Europe over the last decade, with a focus on England, France, Germany and Sweden. In particular, we explore how HTA has evolved over time as well as its impact on policy and practice. While countries share many of the same objectives, there are differences in the way HTA agencies and programmes are organised, operate, and influence decision making. Despite these differences, all systems are faced with opportunities and challenges related to stakeholder involvement and acceptance, the suitability and transparency of assessment requirements and methods, balancing evidence and values in decision making, and demonstrating impact. © Cambridge University Press 2012

Programmable Ultra Lightweight System Adaptable Radio (PULSAR) Low Cost Telemetry - Access from Space Advanced Technologies or Down the Middle

NASA Technical Reports Server (NTRS)

Sims. Herb; Varnavas, Kosta; Eberly, Eric

2013-01-01

Software Defined Radio (SDR) technology has been proven in the commercial sector since the early 1990's. Today's rapid advancement in mobile telephone reliability and power management capabilities exemplifies the effectiveness of the SDR technology for the modern communications market. In contrast, presently qualified satellite transponder applications were developed during the early 1960's space program. Programmable Ultra Lightweight System Adaptable Radio (PULSAR, NASA-MSFC SDR) technology revolutionizes satellite transponder technology by increasing data through-put capability by, at least, an order of magnitude. PULSAR leverages existing Marshall Space Flight Center SDR designs and commercially enhanced capabilities to provide a path to a radiation tolerant SDR transponder. These innovations will (1) reduce the cost of NASA Low Earth Orbit (LEO) and Deep Space transponders, (2) decrease power requirements, and (3) a commensurate volume reduction. Also, PULSAR increases flexibility to implement multiple transponder types by utilizing the same hardware with altered logic - no analog hardware change is required - all of which can be accomplished in orbit. This provides high capability, low cost, transponders to programs of all sizes. The final project outcome would be the introduction of a Technology Readiness Level (TRL) 7 low-cost CubeSat to SmallSat telemetry system into the NASA Portfolio.

Review of the role of NICE in promoting the adoption of innovative cardiac technologies.

PubMed

Groves, Peter H; Pomfrett, Chris; Marlow, Mirella

2018-05-17

The National Institute for Health and Care Excellence (NICE) Medical Technologies Evaluation Programme (MTEP) promotes the adoption of innovative diagnostic and therapeutic technologies into National Health Service (NHS) clinical practice through the publication of guidance and briefing documents. Since the inception of the programme in 2009, there have been 7 medical technologiesguidance, 3 diagnostics guidance and 23 medtechinnovation briefing documents published that are relevant to the heart and circulation. Medical technologies guidance is published by NICE for selected single technologies if they offer plausible additional benefits to patients and the healthcare system. Diagnostic guidance is published for diagnostic technologies if they have the potential to improve health outcomes, but if their introduction may be associated with an increase in overall cost to the NHS. Medtechinnovation briefings provide evidence-based advice to those considering the implementation of new medical devices or diagnostic technologies. This review provides reference to all of the guidance and briefing medical technology documents that NICE has published that are relevant to the heart and circulation and reflect on their diverse recommendations. The interaction of MTEP with other NICE programmes is integral to its effectiveness and the means by which consistency is ensured across the different NICE programmes is described. The importance of the input of clinical experts from the cardiovascular professional community and the engagement by NICE with cardiovascular professional societies is highlighted as being fundamental to ensuring the quality of guidance outputs as well as to promoting their implementation and adoption. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

E-learning based distance education programme on Remote Sensing and Geoinformation Science - An initiative of IIRS

NASA Astrophysics Data System (ADS)

Karnatak, H.; Raju, P. L. N.; Krishna Murthy, Y. V. N.; Srivastav, S. K.; Gupta, P. K.

2014-11-01

IIRS has initiated its interactive distance education based capacity building under IIRS outreach programme in year 2007 where more than 15000+ students were trained in the field of geospatial technology using Satellite based interactive terminals and internet based learning using A-View software. During last decade the utilization of Internet technology by different user groups in the society is emerged as a technological revaluation which has directly affect the life of human being. The Internet is used extensively in India for various purposes right from entrainment to critical decision making in government machinery. The role of internet technology is very important for capacity building in any discipline which can satisfy the needs of maximum users in minimum time. Further to enhance the outreach of geospatial science and technology, IIRS has initiated e-learning based certificate courses of different durations. The contents for e-learning based capacity building programme are developed for various target user groups including mid-career professionals, researchers, academia, fresh graduates, and user department professionals from different States and Central Government ministries. The official website of IIRS e-learning is hosted at http://elearning.iirs.gov.in. The contents of IIRS e-learning programme are flexible for anytime, anywhere learning keeping in mind the demands of geographically dispersed audience and their requirements. The program is comprehensive with variety of online delivery modes with interactive, easy to learn and having a proper blend of concepts and practical to elicit students' full potential. The course content of this programme includes Image Statistics, Basics of Remote Sensing, Photogrammetry and Cartography, Digital Image Processing, Geographical Information System, Global Positioning System, Customization of Geospatial tools and Applications of Geospatial Technologies. The syllabus of the courses is as per latest developments and trends in geo-spatial science and technologies with specific focus on Indian case studies for geo-spatial applications. The learning is made available through interactive 2D and 3D animations, audio, video for practical demonstrations, software operations with free data applications. The learning methods are implemented to make it more interactive and learner centric application with practical examples of real world problems.

A systematic review of technology-based interventions for unintentional injury prevention education and behaviour change.

PubMed

Omaki, Elise; Rizzutti, Nicholas; Shields, Wendy; Zhu, Jeffrey; McDonald, Eileen; Stevens, Martha W; Gielen, Andrea

2017-04-01

The aims of this literature review are to (1) summarise how computer and mobile technology-based health behaviour change applications have been evaluated in unintentional injury prevention, (2) describe how these successes can be applied to injury-prevention programmes in the future and (3) identify research gaps. Studies included in this systematic review were education and behaviour change intervention trials and programme evaluations in which the intervention was delivered by either a computer or mobile technology and addressed an unintentional injury prevention topic. Articles were limited to those published in English and after 1990. Among the 44 technology-based injury-prevention studies included in this review, 16 studies evaluated locally hosted software programmes, 4 studies offered kiosk-based programmes, 11 evaluated remotely hosted internet programmes, 2 studies used mobile technology or portable devices and 11 studies evaluated virtual-reality interventions. Locally hosted software programmes and remotely hosted internet programmes consistently increased knowledge and behaviours. Kiosk programmes showed evidence of modest knowledge and behaviour gains. Both programmes using mobile technology improved behaviours. Virtual-reality programmes consistently improved behaviours, but there were little gains in knowledge. No studies evaluated text-messaging programmes dedicated to injury prevention. There is much potential for computer-based programmes to be used for injury-prevention behaviour change. The reviewed studies provide evidence that computer-based communication is effective in conveying information and influencing how participants think about an injury topic and adopt safety behaviours. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Eye vision system using programmable micro-optics and micro-electronics

NASA Astrophysics Data System (ADS)

Riza, Nabeel A.; Amin, M. Junaid; Riza, Mehdi N.

2014-02-01

Proposed is a novel eye vision system that combines the use of advanced micro-optic and microelectronic technologies that includes programmable micro-optic devices, pico-projectors, Radio Frequency (RF) and optical wireless communication and control links, energy harvesting and storage devices and remote wireless energy transfer capabilities. This portable light weight system can measure eye refractive powers, optimize light conditions for the eye under test, conduct color-blindness tests, and implement eye strain relief and eye muscle exercises via time sequenced imaging. Described is the basic design of the proposed system and its first stage system experimental results for vision spherical lens refractive error correction.

Feedforward, high density, programmable read only neural network based memory system

NASA Technical Reports Server (NTRS)

Daud, Taher; Moopenn, Alex; Lamb, James; Thakoor, Anil; Khanna, Satish

1988-01-01

Neural network-inspired, nonvolatile, programmable associative memory using thin-film technology is demonstrated. The details of the architecture, which uses programmable resistive connection matrices in synaptic arrays and current summing and thresholding amplifiers as neurons, are described. Several synapse configurations for a high-density array of a binary connection matrix are also described. Test circuits are evaluated for operational feasibility and to demonstrate the speed of the read operation. The results are discussed to highlight the potential for a read data rate exceeding 10 megabits/sec.

Mechatronic System Design Course for Undergraduate Programmes

ERIC Educational Resources Information Center

Saleem, A.; Tutunji, T.; Al-Sharif, L.

2011-01-01

Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching…

Results from the UK 3rd generation programme: Albion

NASA Astrophysics Data System (ADS)

McEwen, R. K.; Axcell, C.; Knowles, P.; Hoade, K. P.; Wilson, M.; Dennis, P. N. J.; Backhouse, P.; Gordon, N. T.

2008-10-01

Following the development of 1st Generation systems in the 1970s, thermal imaging has been in service with the UK armed forces for over 25 years and has proven itself to be a battle winning technology. More recently the wider accessibility to similar technologies within opposing forces has reduced the military advantage provided by these 1st Generation systems and a clear requirement has been identified by the UK MOD for thermal imaging sensors providing increased detection, recognition and identification (DRI) ranges together with a simplified logistical deployment burden and reduced through-life costs. In late 2005, the UK MOD initiated a programme known as "Albion" to develop high performance 3rd Generation single waveband infrared detectors to meet this requirement. At the same time, under a separate programme supporting higher risk technology, a dual waveband infrared detector was also developed. The development phase of the Albion programme has now been completed and prototype detectors are now available and have been integrated into demonstration thermal imaging cameras. The Albion programme has now progressed into the second phase, incorporating both single and dual waveband devices, focussing on low rate initial production (LRIP) and qualification of the devices for military applications. All of the detectors have been fabricated using cadmium mercury telluride material (CMT), grown by metal organic vapour phase epitaxy (MOVPE) on low cost, gallium arsenide (GaAs) substrates and bump bonded to the silicon read out circuit (ROIC). This paper discusses the design features of the 3rd Generation detectors developed in the UK together with the results obtained from the prototype devices both in the laboratory and when integrated into field deployable thermal imaging cameras.

Geothermal projects funded under the NER 300 programme - current state of development and knowledge gained

NASA Astrophysics Data System (ADS)

Uihlein, Andreas; Salto Saura, Lourdes; Sigfusson, Bergur; Lichtenvort, Kerstin; Gagliardi, Filippo

2015-04-01

Introduction The NER 300 programme, managed by the European Commission is one of the largest funding programmes for innovative low-carbon energy demonstration projects. NER 300 is so called because it is funded from the sale of 300 million emission allowances from the new entrants' reserve (NER) set up for the third phase of the EU emissions trading system (ETS). The programme aims to successfully demonstrate environmentally safe carbon capture and storage (CCS) and innovative renewable energy (RES) technologies on a commercial scale with a view to scaling up production of low-carbon technologies in the EU. Consequently, it supports a wide range of CCS and RES technologies (bioenergy, concentrated solar power, photovoltaics, geothermal, wind, ocean, hydropower, and smart grids). Funded projects and the role of geothermal projects for the programme In total, about EUR 2.1 billion have been awarded to 39 projects through the programme's 2 calls for proposals (the first awarded in December 2012, the second in July 2014). The programme has awarded around 70 mEUR funding to 3 geothermal projects in Hungary, Croatia and France (see Annex). The Hungarian geothermal project awarded funding under the first call will enter into operation at the end of 2015 and the rest are expected to start in 2016 (HR) and in 2018 (FR), respectively. Knowledge Sharing Knowledge sharing requirements are built into the legal basis of the programme as a critical tool to lower risks in bridging the transition to large-scale production of innovative renewable energy and CCS deployment. Projects have to submit annually to the European Commission relevant knowledge gained during that year in the implementation of their project. The relevant knowledge is aggregated and disseminated by the European Commission to industry, research, government, NGO and other interest groups and associations in order to provide a better understanding of the practical challenges that arise in the important step of scaling up technologies and operating them at commercial scale. The knowledge sharing of the NER 300 programme should lead to better planning and faster introduction of low carbon technologies in the future. Content of the presentation The presentation will introduce the geothermal projects that have been awarded funding, including their state-of-play. Insights and knowledge gained from the projects that have entered into operation will be shown and discussed. Furthermore, the presentation will provide an overview of the NER 300 programme.

Integrated imaging sensor systems with CMOS active pixel sensor technology

NASA Technical Reports Server (NTRS)

Yang, G.; Cunningham, T.; Ortiz, M.; Heynssens, J.; Sun, C.; Hancock, B.; Seshadri, S.; Wrigley, C.; McCarty, K.; Pain, B.

2002-01-01

This paper discusses common approaches to CMOS APS technology, as well as specific results on the five-wire programmable digital camera-on-a-chip developed at JPL. The paper also reports recent research in the design, operation, and performance of APS imagers for several imager applications.

The Digital Workforce: Update, August 2000 [and] The Digital Work Force: State Data & Rankings, September 2000.

ERIC Educational Resources Information Center

Sargent, John

The Office of Technology Policy analyzed Bureau of Labor Statistics' growth projections for the core occupational classifications of IT (information technology) workers to assess future demand in the United States. Classifications studied were computer engineers, systems analysts, computer programmers, database administrators, computer support…

OLED displays in a ground-mobile application

NASA Astrophysics Data System (ADS)

Thomas, J.; Lorimer, S.

2008-04-01

OLED technology has matured sufficiently to consider it a realistic candidate for military display applications. Manufacturing sources are transitioning from an early developer to a business focused and often rationalised supply base that already has a sustainable business model. New commercial products, with a growing list of applications are slowly swelling the list of available OLED display components that can be considered for military requirements. This paper describes an exploratory application of OLED technology to the Towed Artillery Digitisation (TAD) programme. The Gunners Display function in this system endures the most difficult environment available in Army programmes. By replicating the Gunners Display, we have confirmed that OLED technology is compatible with and technically almost ready for rugged military applications using newly available commercial sources.

Practice-centred evaluation and the privileging of care in health information technology evaluation.

PubMed

Darking, Mary; Anson, Rachel; Bravo, Ferdinand; Davis, Julie; Flowers, Steve; Gillingham, Emma; Goldberg, Lawrence; Helliwell, Paul; Henwood, Flis; Hudson, Claire; Latimer, Simon; Lowes, Paul; Stirling, Ian

2014-06-05

Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts - can complement and in some instances offer advantages over, outcome-centric evaluation models. We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An 'action learning' approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these activities we asked: how can a practice-centred approach be embedded into evaluation of health information technologies? Organising EPR and telemedicine evaluation around predetermined outcome measures alone can be impractical given the complex and contingent nature of such projects. It also limits the extent to which unforeseen outcomes and new capabilities are recognised. Such evaluations often fail to improve understanding of 'when' and 'under what conditions' technology-enabled service improvements are realised, and crucially, how such innovation improves care. Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes.

Worthy test programmes and developments of smart electromechanical actuators

NASA Astrophysics Data System (ADS)

Annaz, Fawaz Yahya

2007-02-01

Early aircraft flight control systems were totally manually operated, that is, the force required to move flight control surfaces was generated by the pilot and transmitted by cables and rods. As aerodynamics and airframe technology developed and speeds increased, the forces required to move control surfaces increased, as did the number of surfaces. In order to provide the extra power required, hydraulic technology was introduced. To date, the common element in the development of flight control systems has been, mainly, restricted to this type of technology. This is because of its proven reliability and the lack of alternative technologies. However, the technology to build electromechanically actuated primary flight control systems is now available. Motors developing the required power at the required frequencies are now possible (with the use of high energy permanent magnetic materials and compact high speed electronic circuits). It is this particular development which may make the concept of an 'all electric aircraft' realizable in the near future. The purpose of the all electric aircraft concept is the consolidation of all secondary power systems into electric power. The elimination of hydraulic and pneumatic secondary power systems will improve maintainability, flight readiness and use of energy. This paper will present the development of multi-lane smart electric actuators and offer an insight into other subsequent fields of study. The key areas of study may be categorized as follows. State of the art hydraulic actuators. Electromechanical actuator system test programmes. Development of electromechanical actuators. Modelling of electromechanical actuators.

Designing and Evaluating a Professional Development Programme for Basic Technology Integration in English as a Foreign Language (EFL) Classrooms

ERIC Educational Resources Information Center

Ansyari, Muhammad Fauzan

2015-01-01

This study aims to develop and evaluate a professional development programme for technology integration in an Indonesian university's English language teaching setting. The study explored the characteristics of this programme to English lecturers' technological pedagogical content knowledge (TPCK) development. This design-based research employed…

Development and flight qualification of the C-SiC thermal protection systems for the IXV

NASA Astrophysics Data System (ADS)

Buffenoir, François; Zeppa, Céline; Pichon, Thierry; Girard, Florent

2016-07-01

The Intermediate experimental Vehicle (IXV) atmospheric re-entry demonstrator, developed within the FLPP (Future Launcher Preparatory Programme) and funded by ESA, aimed at developing a demonstration vehicle that gave Europe a unique opportunity to increase its knowledge in the field of advanced atmospheric re-entry technologies. A key technology that has been demonstrated in real conditions through the flight of this ambitious vehicle is the thermal protection system (TPS) of the Vehicle. Within this programme, HERAKLES, Safran Group, has been in charge of the TPS of the windward and nose assemblies of the vehicle, and has developed and manufactured SepcarbInox® ceramic matrix composite (CMC) protection systems that provided a high temperature resistant non ablative outer mould line (OML) for enhanced aerodynamic control. The design and flight justification of these TPS has been achieved through extensive analysis and testing:

A low-cost approach to the exploration of Mars through a robotic technology demonstrator mission

NASA Astrophysics Data System (ADS)

Ellery, Alex; Richter, Lutz; Parnell, John; Baker, Adam

2003-11-01

We present a proposed robotic mission to Mars - Vanguard - for the Aurora Arrow programme which combines an extensive technology demonstrator with a high scientific return. The novel aspect of this technology demonstrator is the demonstration of "water mining" capabilities for in-situ resource utilisation in conjunction with high-value astrobiological investigation within a low mass lander package of 70 kg. The basic architecture comprises a small lander, a micro-rover and a number of ground-penetrating moles. This basic architecture offers the possibility of testing a wide variety of generic technologies associated with space systems and planetary exploration. The architecture provides for the demonstration of specific technologies associated with planetary surface exploration, and with the Aurora programme specifically. Technology demonstration of in-situ resource utilisation will be a necessary precursor to any future human mission to Mars. Furthermore, its modest mass overhead allows the reuse of the already built Mars Express bus, making it a very low cost option.

A low-cost approach to the exploration of Mars through a robotic technology demonstrator mission

NASA Astrophysics Data System (ADS)

Ellery, Alex; Richter, Lutz; Parnell, John; Baker, Adam

2006-10-01

We present a proposed robotic mission to Mars—Vanguard—for the Aurora Arrow programme which combines an extensive technology demonstrator with a high scientific return. The novel aspect of this technology demonstrator is the demonstration of “water mining” capabilities for in situ resource utilisation (ISRU) in conjunction with high-value astrobiological investigation within a low-mass lander package of 70 kg. The basic architecture comprises a small lander, a micro-rover and a number of ground-penetrating moles. This basic architecture offers the possibility of testing a wide variety of generic technologies associated with space systems and planetary exploration. The architecture provides for the demonstration of specific technologies associated with planetary surface exploration, and with the Aurora programme specifically. Technology demonstration of ISRU will be a necessary precursor to any future human mission to Mars. Furthermore, its modest mass overhead allows the re-use of the already built Mars Express bus, making it a very low-cost option.

A Low-Power High-Speed Smart Sensor Design for Space Exploration Missions

NASA Technical Reports Server (NTRS)

Fang, Wai-Chi

1997-01-01

A low-power high-speed smart sensor system based on a large format active pixel sensor (APS) integrated with a programmable neural processor for space exploration missions is presented. The concept of building an advanced smart sensing system is demonstrated by a system-level microchip design that is composed with an APS sensor, a programmable neural processor, and an embedded microprocessor in a SOI CMOS technology. This ultra-fast smart sensor system-on-a-chip design mimics what is inherent in biological vision systems. Moreover, it is programmable and capable of performing ultra-fast machine vision processing in all levels such as image acquisition, image fusion, image analysis, scene interpretation, and control functions. The system provides about one tera-operation-per-second computing power which is a two order-of-magnitude increase over that of state-of-the-art microcomputers. Its high performance is due to massively parallel computing structures, high data throughput rates, fast learning capabilities, and advanced VLSI system-on-a-chip implementation.

Field application of smart SHM using field programmable gate array technology to monitor an RC bridge in New Mexico

NASA Astrophysics Data System (ADS)

Azarbayejani, M.; Jalalpour, M.; El-Osery, A. I.; Reda Taha, M. M.

2011-08-01

In this paper, an innovative field application of a structural health monitoring (SHM) system using field programmable gate array (FPGA) technology and wireless communication is presented. The new SHM system was installed to monitor a reinforced concrete (RC) bridge on Interstate 40 (I-40) in Tucumcari, New Mexico. This newly installed system allows continuous remote monitoring of this bridge using solar power. Details of the SHM component design and installation are discussed. The integration of FPGA and solar power technologies make it possible to remotely monitor infrastructure with limited access to power. Furthermore, the use of FPGA technology enables smart monitoring where data communication takes place on-need (when damage warning signs are met) and on-demand for periodic monitoring of the bridge. Such a system enables a significant cut in communication cost and power demands which are two challenges during SHM operation. Finally, a three-dimensional finite element (FE) model of the bridge was developed and calibrated using a static loading field test. This model is then used for simulating damage occurrence on the bridge. Using the proposed automation process for SHM will reduce human intervention significantly and can save millions of dollars currently spent on prescheduled inspection of critical infrastructure worldwide.

Project Mercury: NASA's first manned space programme

NASA Astrophysics Data System (ADS)

Catchpole, John

Project Mercury will offer a developmental resume of the first American manned spaceflight programme and its associated infrastructure, including accounts of space launch vehicles. The book highlights the differences in Redstone/Atlas technology, drawing similar comparisons between ballistic capsules and alternative types of spacecraft. The book also covers astronaut selection and training, as well as tracking systems, flight control, basic principles of spaceflight and detailed accounts of individual flights.

MOEMs-based new functionalities for future instrumentation in space

NASA Astrophysics Data System (ADS)

Zamkotsian, Frédéric; Liotard, Arnaud; Viard, Thierry; Costes, Vincent; Hébert, Philippe-Jean; Hinglais, Emmanuel; Villenave, Michel

2017-11-01

Micro-Opto-Electro-Mechanical Systems (MOEMS) could be key components in future generation of space instruments. In Earth Observation, Universe Observation and Planet Exploration, scientific return of the instruments must be optimized in future missions. MOEMS devices are based on the mature micro-electronics technology and in addition to their compactness, scalability, and specific task customization, they could generate new functions not available with current technologies. CNES has initiated a study with LAM and TAS for listing the new functions associated with several types of MEMS (programmable slits, programmable micro-diffraction gratings, micro-deformable mirrors). Instrumental applications are then derived and promising concepts are described.

Music, Technology and Adolescents with Autism Spectrum Disorders: The Effectiveness of the Touch Screen Interface

ERIC Educational Resources Information Center

Hillier, Ashleigh; Greher, Gena; Queenan, Alexa; Marshall, Savannah; Kopec, Justin

2016-01-01

The use of technology in music education is gaining momentum, although very little work has focused on students with disabilities. Our "SoundScape" programme addressed this gap through implementing a technology-based music programme for adolescents and young adults with autism spectrum disorders (ASD). Programme participants met on a…

Analog Module Architecture for Space-Qualified Field-Programmable Mixed-Signal Arrays

NASA Technical Reports Server (NTRS)

Edwards, R. Timothy; Strohbehn, Kim; Jaskulek, Steven E.; Katz, Richard

1999-01-01

Spacecraft require all manner of both digital and analog circuits. Onboard digital systems are constructed almost exclusively from field-programmable gate array (FPGA) circuits providing numerous advantages over discrete design including high integration density, high reliability, fast turn-around design cycle time, lower mass, volume, and power consumption, and lower parts acquisition and flight qualification costs. Analog and mixed-signal circuits perform tasks ranging from housekeeping to signal conditioning and processing. These circuits are painstakingly designed and built using discrete components due to a lack of options for field-programmability. FPAA (Field-Programmable Analog Array) and FPMA (Field-Programmable Mixed-signal Array) parts exist but not in radiation-tolerant technology and not necessarily in an architecture optimal for the design of analog circuits for spaceflight applications. This paper outlines an architecture proposed for an FPAA fabricated in an existing commercial digital CMOS process used to make radiation-tolerant antifuse-based FPGA devices. The primary concerns are the impact of the technology and the overall array architecture on the flexibility of programming, the bandwidth available for high-speed analog circuits, and the accuracy of the components for high-performance applications.

Use of Field Programmable Gate Array Technology in Future Space Avionics

NASA Technical Reports Server (NTRS)

Ferguson, Roscoe C.; Tate, Robert

2005-01-01

Fulfilling NASA's new vision for space exploration requires the development of sustainable, flexible and fault tolerant spacecraft control systems. The traditional development paradigm consists of the purchase or fabrication of hardware boards with fixed processor and/or Digital Signal Processing (DSP) components interconnected via a standardized bus system. This is followed by the purchase and/or development of software. This paradigm has several disadvantages for the development of systems to support NASA's new vision. Building a system to be fault tolerant increases the complexity and decreases the performance of included software. Standard bus design and conventional implementation produces natural bottlenecks. Configuring hardware components in systems containing common processors and DSPs is difficult initially and expensive or impossible to change later. The existence of Hardware Description Languages (HDLs), the recent increase in performance, density and radiation tolerance of Field Programmable Gate Arrays (FPGAs), and Intellectual Property (IP) Cores provides the technology for reprogrammable Systems on a Chip (SOC). This technology supports a paradigm better suited for NASA's vision. Hardware and software production are melded for more effective development; they can both evolve together over time. Designers incorporating this technology into future avionics can benefit from its flexibility. Systems can be designed with improved fault isolation and tolerance using hardware instead of software. Also, these designs can be protected from obsolescence problems where maintenance is compromised via component and vendor availability.To investigate the flexibility of this technology, the core of the Central Processing Unit and Input/Output Processor of the Space Shuttle AP101S Computer were prototyped in Verilog HDL and synthesized into an Altera Stratix FPGA.

Microprocessors: Laboratory Simulation of Industrial Control Applications.

ERIC Educational Resources Information Center

Gedeon, David V.

1981-01-01

Describes a course to make technical managers more aware of computer technology and how data loggers, programmable controllers, and larger computer systems interact in a hierarchical configuration of manufacturing process control. (SK)

Advanced Electronic Systems. Curriculum Guide for Technology Education.

ERIC Educational Resources Information Center

Patrick, Dale R.

This curriculum for a 1-semester or 1-year course in electronics is designed to take students from basic through advanced electronic systems. It covers several electronic areas, such as digital electronics, communication electronics, industrial process control, instrumentation, programmable controllers, and robotics. The guide contains…

Programmable data collection platform study

NASA Technical Reports Server (NTRS)

1976-01-01

The results of a feasibility study incorporating microprocessors in data collection platforms in described. An introduction to microcomputer hardware and software concepts is provided. The influence of microprocessor technology on the design of programmable data collection platform hardware is discussed. A standard modular PDCP design capable of meeting the design goals is proposed, and the process of developing PDCP programs is examined. A description of design and construction of the UT PDCP development system is given.

Technology-Enhanced Physics Programme for Community-Based Science Learning: Innovative Design and Programme Evaluation in a Theme Park

ERIC Educational Resources Information Center

Tho, Siew Wei; Chan, Ka Wing; Yeung, Yau Yuen

2015-01-01

In this study, a new physics education programme is specifically developed for a famous theme park in Hong Kong to provide community-based science learning to her visitors, involving her three newly constructed rides. We make innovative use of digital technologies in this programme and incorporate a rigorous evaluation of the learning…

A Reconfigurable Communications System for Small Spacecraft

NASA Technical Reports Server (NTRS)

Chu, Pong P.; Kifle, Muli

2004-01-01

Two trends of NASA missions are the use of multiple small spacecraft and the development of an integrated space network. To achieve these goals, a robust and agile communications system is needed. Advancements in field programmable gate array (FPGA) technology have made it possible to incorporate major communication and network functionalities in FPGA chips; thus this technology has great potential as the basis for a reconfigurable communications system. This report discusses the requirements of future space communications, reviews relevant issues, and proposes a methodology to design and construct a reconfigurable communications system for small scientific spacecraft.

Telemetry Technology

NASA Technical Reports Server (NTRS)

1997-01-01

In 1990, Avtec Systems, Inc. developed its first telemetry boards for Goddard Space Flight Center. Avtec products now include PC/AT, PCI and VME-based high speed I/O boards and turn-key systems. The most recent and most successful technology transfer from NASA to Avtec is the Programmable Telemetry Processor (PTP), a personal computer- based, multi-channel telemetry front-end processing system originally developed to support the NASA communication (NASCOM) network. The PTP performs data acquisition, real-time network transfer, and store and forward operations. There are over 100 PTP systems located in NASA facilities and throughout the world.

Generalized Data Management Systems--Some Perspectives.

ERIC Educational Resources Information Center

Minker, Jack

A Generalized Data Management System (GDMS) is a software environment provided as a tool for analysts, administrators, and programmers who are responsible for the maintenance, query and analysis of a data base to permit the manipulation of newly defined files and data with the existing programs and system. Because the GDMS technology is believed…

Troubleshooting of an Electromechanical System (Westinghouse PLC Controlling a Pneumatic Robot). High-Technology Training Module.

ERIC Educational Resources Information Center

Tucker, James D.

This training module on the troubleshooting of an electromechanical system, The Westinghouse Programmable Logic Controller (PLC) controlling a pneumatic robot, is used for a troubleshooting unit in an electromechanical systems/robotics and automation systems course. In this unit, students locate and repair a defect in a PLC-operated machine. The…

A Thesaurus for Information Technology and Education. Occasional Paper ITE/6/86.

ERIC Educational Resources Information Center

Lewis, R.

Prepared for use by the Information Technology and Education (ITE) Programme of the Economic and Social Science Research Council (ESRC), this draft document is based on the 1984 EUDISED (European Documentation and Information System for Education) Thesaurus for Information Processing. This draft is a modified thesaurus which aims to keep as close…

Innovations for competitiveness: European views on "better-faster-cheaper"

NASA Astrophysics Data System (ADS)

Atzei, A.; Groepper, P.; Novara, M.; Pseiner, K.

1999-09-01

The paper elaborates on " lessons learned" from two recent ESA workshops, one focussing on the role of Innovation in the competitiveness of the space sector and the second on technology and engineering aspects conducive to better, faster and cheaper space programmes. The paper focuses primarily on four major aspects, namely: a) the adaptations of industrial and public organisations to the global market needs; b) the understanding of the bottleneck factors limiting competitiveness; c) the trends toward new system architectures and new engineering and production methods; d) the understanding of the role of new technology in the future applications. Under the pressure of market forces and the influence of many global and regional players, applications of space systems and technology are becoming more and more competitive. It is well recognised that without major effort for innovation in industrial practices, organisations, R&D, marketing and financial approaches the European space sector will stagnate and loose its competence as well as its competitiveness. It is also recognised that a programme run according to the "better, faster, cheaper" philosophy relies on much closer integration of system design, development and verification, and draws heavily on a robust and comprehensive programme of technology development, which must run in parallel and off-line with respect to flight programmes. A company's innovation capabilities will determine its future competitive advantage (in time, cost, performance or value) and overall growth potential. Innovation must be a process that can be counted on to provide repetitive, sustainable, long-term performance improvements. As such, it needs not depend on great breakthroughs in technology and concepts (which are accidental and rare). Rather, it could be based on bold evolution through the establishment of know-how, application of best practices, process effectiveness and high standards, performance measurement, and attention to customers and professional marketing. Having a technological lead allows industry to gain a competitive advantage in performance, cost and opportunities. Instrumental to better competitiveness is an R&D effort based on the adaptation of high technology products, capable of capturing new users, increasing production, decreasing the cost and delivery time and integrating high level of intelligence, information and autonomy. New systems will have to take in to account from the start what types of technologies are being developed or are already available in other areas outside space, and design their system accordingly. The future challenge for "faster, better, cheaper" appears to concern primarily "cost-effective", performant autonomous spacecraft, "cost-effective", reliable launching means and intelligent data fusion technologies and robust software serving mass- market real time services, distributed via EHF bands and Internet. In conclusion, it can be noticed that in the past few years new approaches have considerably enlarged the ways in which space missions can be implemented. They are supported by true innovations in mission concepts, system architecture, development and technologies, in particular for the development of initiatives based on multi-mission mini-satellites platforms for communication and Earth observation missions. There are also definite limits to cost cutting (such as lowering heads counts and increasing efficiency), and therefore the strategic perspective must be shifted from the present emphasis on cost-driven enhancement to revenue-driven improvements for growth. And since the product life-cycle is continuously shortening, competitiveness is linked very strongly with the capability to generate new technology products which enhance cost/benefit performance.

Automated Software Acceleration in Programmable Logic for an Efficient NFFT Algorithm Implementation: A Case Study.

PubMed

Rodríguez, Manuel; Magdaleno, Eduardo; Pérez, Fernando; García, Cristhian

2017-03-28

Non-equispaced Fast Fourier transform (NFFT) is a very important algorithm in several technological and scientific areas such as synthetic aperture radar, computational photography, medical imaging, telecommunications, seismic analysis and so on. However, its computation complexity is high. In this paper, we describe an efficient NFFT implementation with a hardware coprocessor using an All-Programmable System-on-Chip (APSoC). This is a hybrid device that employs an Advanced RISC Machine (ARM) as Processing System with Programmable Logic for high-performance digital signal processing through parallelism and pipeline techniques. The algorithm has been coded in C language with pragma directives to optimize the architecture of the system. We have used the very novel Software Develop System-on-Chip (SDSoC) evelopment tool that simplifies the interface and partitioning between hardware and software. This provides shorter development cycles and iterative improvements by exploring several architectures of the global system. The computational results shows that hardware acceleration significantly outperformed the software based implementation.

Automated Software Acceleration in Programmable Logic for an Efficient NFFT Algorithm Implementation: A Case Study

PubMed Central

Rodríguez, Manuel; Magdaleno, Eduardo; Pérez, Fernando; García, Cristhian

2017-01-01

Non-equispaced Fast Fourier transform (NFFT) is a very important algorithm in several technological and scientific areas such as synthetic aperture radar, computational photography, medical imaging, telecommunications, seismic analysis and so on. However, its computation complexity is high. In this paper, we describe an efficient NFFT implementation with a hardware coprocessor using an All-Programmable System-on-Chip (APSoC). This is a hybrid device that employs an Advanced RISC Machine (ARM) as Processing System with Programmable Logic for high-performance digital signal processing through parallelism and pipeline techniques. The algorithm has been coded in C language with pragma directives to optimize the architecture of the system. We have used the very novel Software Develop System-on-Chip (SDSoC) evelopment tool that simplifies the interface and partitioning between hardware and software. This provides shorter development cycles and iterative improvements by exploring several architectures of the global system. The computational results shows that hardware acceleration significantly outperformed the software based implementation. PMID:28350358

A Thesaurus-Linked Science Question-Banking System.

ERIC Educational Resources Information Center

Johnson, Sandra; Maher, Brian

1984-01-01

Outlines implementation and uses of the computerized question-banking system of the thesaurus-linked browse procedure used by APU National Assessment in Science Programme. The ROOT Thesaurus, a comprehensive indexing and searching tool for technological applications, is described and its modifications are discussed as the basis for the…

Preparing Pre-Service Teachers to Integrate Technology into K-12 Instruction: Evaluation of a Technology-Infused Approach

ERIC Educational Resources Information Center

Admiraal, Wilfried; van Vugt, Felix; Kranenburg, Frans; Koster, Bob; Smit, Ben; Weijers, Sanne; Lockhorst, Ditte

2017-01-01

The quality of how technology is addressed in teacher education programmes is conditional for how student teachers apply technology in secondary schools after their graduation. Two technology-infused courses of one teacher education programme were evaluated. In line with studies on the development of pre-service teachers' technological,…

Information technologies for taking into account risks in business development programme

NASA Astrophysics Data System (ADS)

Kalach, A. V.; Khasianov, R. R.; Rossikhina, L. V.; Zybin, D. G.; Melnik, A. A.

2018-05-01

The paper describes the information technologies for taking into account risks in business development programme, which rely on the algorithm for assessment of programme project risks and the algorithm of programme forming with constrained financing of high-risk projects taken into account. A method of lower-bound estimate is suggested for subsets of solutions. The corresponding theorem and lemma and their proofs are given.

Health information technology and sociotechnical systems: a progress report on recent developments within the UK National Health Service (NHS).

PubMed

Waterson, Patrick

2014-03-01

This paper summarises some of the research that Ken Eason and colleagues at Loughborough University have carried out in the last few years on the introduction of Health Information Technologies (HIT) within the UK National Health Service (NHS). In particular, the paper focuses on three examples which illustrate aspects of the introduction of HIT within the NHS and the role played by the UK National Programme for Information Technology (NPfIT). The studies focus on stages of planning and preparation, implementation and use, adaptation and evolution of HIT (e.g., electronic patient records, virtual wards) within primary, secondary and community care settings. Our findings point to a number of common themes which characterise the use of these systems. These include tensions between national and local strategies for implementing HIT and poor fit between healthcare work systems and the design of HIT. The findings are discussed in the light of other large-scale, national attempts to introduce similar technologies, as well as drawing out a set of wider lessons learnt from the NPfIT programme based on Ken Eason's earlier work and other research on the implementation of large-scale HIT. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Space-based societal applications—Relevance in developing countries

NASA Astrophysics Data System (ADS)

Bhaskaranarayana, A.; Varadarajan, C.; Hegde, V. S.

2009-11-01

Space technology has the vast potential for addressing a variety of societal problems of the developing countries, particularly in the areas of communication, education and health sectors, land and water resources management, disaster management and weather forecasting. Both remote sensing and communication technologies can be used to achieve this goal. With its primary emphasis on application of space technology, on an end-to-end basis, towards national development, the Indian Space Programme has distinguished itself as one of the most cost-effective and development-oriented space programmes in the world. Developing nations are faced with the enormous task of carrying development-oriented education to the masses at the lower strata of their societies. One important feature of these populations is their large number and the spread over vast and remote areas of these nations, making the reaching out to them a difficult task. Satellite communication (Satcom) technology offers the unique capability of simultaneously reaching out to very large numbers, spread over vast areas, including the remote corners of the country. It is a strong tool to support development education. India has been amongst the first few nations to explore and put to use the Satcom technology for education and development-oriented services to the rural masses. Most of the developing countries have inadequate infrastructure to provide proper medical care to the rural population. Availability of specialist doctors in rural areas is a major bottleneck. Use of Satcom and information technology to connect rural clinics to urban hospitals through telemedicine systems is one of the solutions; and India has embarked upon an effective satellite-based telemedicine programme. Space technology is also useful in disaster warning and management related applications. Use of satellite systems and beacons for locating the distressed units on land, sea or air is well known to us. Indian Space Research Organisation (ISRO) is already a part of the International initiative called Satellite Aided Search and Rescue System. The programme to set up satellite-based Village Resource Centres (VRCs) across India, for providing a variety of services relevant to the rural communities, is also a unique societal application of space technology. The VRCs are envisaged as single window delivery mechanism for a variety of space-based products and services, such as tele-education; telemedicine; information on natural resources for planning and development at local level; interactive advisories on agriculture, fisheries, land and water resources management, livestock management, etc.; interactive vocational training towards alternative livelihood; e-governance; weather information; etc. This paper describes the various possibilities and potentials of Satcom and Remote Sensing technologies for societal applications. The initiatives taken by Indian Space Research Organisation in this direction are highlighted.

[CRISPR/Cas system for genome editing in pluripotent stem cells].

PubMed

Vasil'eva, E A; Melino, D; Barlev, N A

2015-01-01

Genome editing systems based on site-specific nucleases became very popular for genome editing in modern bioengineering. Human pluripotent stem cells provide a unique platform for genes function study, disease modeling, and drugs testing. Consequently, technology for fast, accurate and well controlled genome manipulation is required. CRISPR/Cas (clustered regularly interspaced short palindromic repeat/CRISPR-associated) system could be employed for these purposes. This system is based on site-specific programmable nuclease Cas9. Numerous advantages of the CRISPR/Cas system and its successful application to human stem cells provide wide opportunities for genome therapy and regeneration medicine. In this publication, we describe and compare the main genome editing systems based on site-specific programmable nucleases and discuss opportunities and perspectives of the CRISPR/Cas system for application to pluripotent stem cells.

A modular, programmable measurement system for physiological and spaceflight applications

NASA Technical Reports Server (NTRS)

Hines, John W.; Ricks, Robert D.; Miles, Christopher J.

1993-01-01

The NASA-Ames Sensors 2000! Program has developed a small, compact, modular, programmable, sensor signal conditioning and measurement system, initially targeted for Life Sciences Spaceflight Programs. The system consists of a twelve-slot, multi-layer, distributed function backplane, a digital microcontroller/memory subsystem, conditioned and isolated power supplies, and six application-specific, physiological signal conditioners. Each signal condition is capable of being programmed for gains, offsets, calibration and operate modes, and, in some cases, selectable outputs and functional modes. Presently, the system has the capability for measuring ECG, EMG, EEG, Temperature, Respiration, Pressure, Force, and Acceleration parameters, in physiological ranges. The measurement system makes heavy use of surface-mount packaging technology, resulting in plug in modules sized 125x55 mm. The complete 12-slot system is contained within a volume of 220x150x70mm. The system's capabilities extend well beyond the specific objectives of NASA programs. Indeed, the potential commercial uses of the technology are virtually limitless. In addition to applications in medical and biomedical sensing, the system might also be used in process control situations, in clinical or research environments, in general instrumentation systems, factory processing, or any other applications where high quality measurements are required.

A modular, programmable measurement system for physiological and spaceflight applications

NASA Astrophysics Data System (ADS)

Hines, John W.; Ricks, Robert D.; Miles, Christopher J.

1993-02-01

The NASA-Ames Sensors 2000] Program has developed a small, compact, modular, programmable, sensor signal conditioning and measurement system, initially targeted for Life Sciences Spaceflight Programs. The system consists of a twelve-slot, multi-layer, distributed function backplane, a digital microcontroller/memory subsystem, conditioned and isolated power supplies, and six application-specific, physiological signal conditioners. Each signal condition is capable of being programmed for gains, offsets, calibration and operate modes, and, in some cases, selectable outputs and functional modes. Presently, the system has the capability for measuring ECG, EMG, EEG, Temperature, Respiration, Pressure, Force, and Acceleration parameters, in physiological ranges. The measurement system makes heavy use of surface-mount packaging technology, resulting in plug in modules sized 125x55 mm. The complete 12-slot system is contained within a volume of 220x150x70mm. The system's capabilities extend well beyond the specific objectives of NASA programs. Indeed, the potential commercial uses of the technology are virtually limitless. In addition to applications in medical and biomedical sensing, the system might also be used in process control situations, in clinical or research environments, in general instrumentation systems, factory processing, or any other applications where high quality measurements are required.

Design and implementation of a reconfigurable mixed-signal SoC based on field programmable analog arrays

NASA Astrophysics Data System (ADS)

Liu, Lintao; Gao, Yuhan; Deng, Jun

2017-11-01

This work presents a reconfigurable mixed-signal system-on-chip (SoC), which integrates switched-capacitor-based field programmable analog arrays (FPAA), analog-to-digital converter (ADC), digital-to-analog converter, digital down converter , digital up converter, 32-bit reduced instruction-set computer central processing unit (CPU) and other digital IPs on a single chip with 0.18 μm CMOS technology. The FPAA intellectual property could be reconfigured as different function circuits, such as gain amplifier, divider, sine generator, and so on. This single-chip integrated mixed-signal system is a complete modern signal processing system, occupying a die area of 7 × 8 mm 2 and consuming 719 mW with a clock frequency of 150 MHz for CPU and 200 MHz for ADC/DAC. This SoC chip can help customers to shorten design cycles, save board area, reduce the system power consumption and depress the system integration risk, which would afford a big prospect of application for wireless communication. Project supported by the National High Technology and Development Program of China (No. 2012AA012303).

Research on NC motion controller based on SOPC technology

NASA Astrophysics Data System (ADS)

Jiang, Tingbiao; Meng, Biao

2006-11-01

With the rapid development of the digitization and informationization, the application of numerical control technology in the manufacturing industry becomes more and more important. However, the conventional numerical control system usually has some shortcomings such as the poor in system openness, character of real-time, cutability and reconfiguration. In order to solve these problems, this paper investigates the development prospect and advantage of the application in numerical control area with system-on-a-Programmable-Chip (SOPC) technology, and puts forward to a research program approach to the NC controller based on SOPC technology. Utilizing the characteristic of SOPC technology, we integrate high density logic device FPGA, memory SRAM, and embedded processor ARM into a single programmable logic device. We also combine the 32-bit RISC processor with high computing capability of the complicated algorithm with the FPGA device with strong motivable reconfiguration logic control ability. With these steps, we can greatly resolve the defect described in above existing numerical control systems. For the concrete implementation method, we use FPGA chip embedded with ARM hard nuclear processor to construct the control core of the motion controller. We also design the peripheral circuit of the controller according to the requirements of actual control functions, transplant real-time operating system into ARM, design the driver of the peripheral assisted chip, develop the application program to control and configuration of FPGA, design IP core of logic algorithm for various NC motion control to configured it into FPGA. The whole control system uses the concept of modular and structured design to develop hardware and software system. Thus the NC motion controller with the advantage of easily tailoring, highly opening, reconfigurable, and expandable can be implemented.

Fast particles identification in programmable form at level-0 trigger by means of the 3D-Flow system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crosetto, Dario B.

1998-10-30

The 3D-Flow Processor system is a new, technology-independent concept in very fast, real-time system architectures. Based on either an FPGA or an ASIC implementation, it can address, in a fully programmable manner, applications where commercially available processors would fail because of throughput requirements. Possible applications include filtering-algorithms (pattern recognition) from the input of multiple sensors, as well as moving any input validated by these filtering-algorithms to a single output channel. Both operations can easily be implemented on a 3D-Flow system to achieve a real-time processing system with a very short lag time. This system can be built either with off-the-shelfmore » FPGAs or, for higher data rates, with CMOS chips containing 4 to 16 processors each. The basic building block of the system, a 3D-Flow processor, has been successfully designed in VHDL code written in ''Generic HDL'' (mostly made of reusable blocks that are synthesizable in different technologies, or FPGAs), to produce a netlist for a four-processor ASIC featuring 0.35 micron CBA (Ceil Base Array) technology at 3.3 Volts, 884 mW power dissipation at 60 MHz and 63.75 mm sq. die size. The same VHDL code has been targeted to three FPGA manufacturers (Altera EPF10K250A, ORCA-Lucent Technologies 0R3T165 and Xilinx XCV1000). A complete set of software tools, the 3D-Flow System Manager, equally applicable to ASIC or FPGA implementations, has been produced to provide full system simulation, application development, real-time monitoring, and run-time fault recovery. Today's technology can accommodate 16 processors per chip in a medium size die, at a cost per processor of less than $5 based on the current silicon die/size technology cost.« less

Preparing engineers for the challenges of community engagement

NASA Astrophysics Data System (ADS)

Harsh, Matthew; Bernstein, Michael J.; Wetmore, Jameson; Cozzens, Susan; Woodson, Thomas; Castillo, Rafael

2017-11-01

Despite calls to address global challenges through community engagement, engineers are not formally prepared to engage with communities. Little research has been done on means to address this 'engagement gap' in engineering education. We examine the efficacy of an intensive, two-day Community Engagement Workshop for engineers, designed to help engineers better look beyond technology, listen to and learn from people, and empower communities. We assessed the efficacy of the workshop in a non-experimental pre-post design using a questionnaire and a concept map. Questionnaire results indicate participants came away better able to ask questions more broadly inclusive of non-technological dimensions of engineering projects. Concept map results indicate participants have a greater understanding of ways social factors shape complex material systems after completing the programme. Based on the workshop's strengths and weaknesses, we discuss the potential of expanding and supplementing the programme to help engineers account for social aspects central to engineered systems.

Community-based livestock breeding programmes: essentials and examples.

PubMed

Mueller, J P; Rischkowsky, B; Haile, A; Philipsson, J; Mwai, O; Besbes, B; Valle Zárate, A; Tibbo, M; Mirkena, T; Duguma, G; Sölkner, J; Wurzinger, M

2015-04-01

Breeding programmes described as community-based (CBBP) typically relate to low-input systems with farmers having a common interest to improve and share their genetic resources. CBBPs are more frequent with keepers of small ruminants, in particular smallholders of local breeds, than with cattle, pigs or chickens with which farmers may have easier access to alternative programmes. Constraints that limit the adoption of conventional breeding technologies in low-input systems cover a range of organizational and technical aspects. The analysis of 8 CBBPs located in countries of Latin-America, Africa and Asia highlights the importance of bottom-up approaches and involvement of local institutions in the planning and implementation stages. The analysis also reveals a high dependence of these programmes on organizational, technical and financial support. Completely self-sustained CBBPs seem to be difficult to realize. There is a need to implement and document formal socio-economic evaluations of CBBPs to provide governments and other development agencies with the information necessary for creating sustainable CBBPs at larger scales. © 2015 Blackwell Verlag GmbH.

The European quantum technologies flagship programme

NASA Astrophysics Data System (ADS)

Riedel, Max F.; Binosi, Daniele; Thew, Rob; Calarco, Tommaso

2017-09-01

Quantum technologies, such as quantum communication, computation, simulation as well as sensors and metrology, address and manipulate individual quantum states and make use of superposition and entanglement. Both companies and governments have realised the high disruptive potential of this technology. Consequently, the European Commission has announced an ambitious flagship programme to start in 2018. Here, we sum up the history leading to the quantum technologies flagship programme and outline its envisioned goals and structure. We also give an overview of the strategic research agenda for quantum communication, which the flagship will pursue during its 10-year runtime.

Comprehensive pulmonary rehabilitation in home-based online groups: a mixed method pilot study in COPD.

PubMed

Burkow, Tatjana M; Vognild, Lars K; Johnsen, Elin; Risberg, Marijke Jongsma; Bratvold, Astrid; Breivik, Elin; Krogstad, Trine; Hjalmarsen, Audhild

2015-12-10

Comprehensive multidisciplinary pulmonary rehabilitation is vital in the management of chronic obstructive pulmonary disease (COPD) and is considered for any stage of the disease. Rehabilitation programmes are often centre-based and organised in groups. However, the distance from the patient's home to the centre and lack of transportation may hinder participation. Rehabilitation at home can improve access to care for patients regardless of disease severity. We had previously studied the technology usability and acceptability of a comprehensive home rehabilitation programme designed for patients with very severe COPD receiving long-term oxygen therapy. The acceptability of such comprehensive home programmes for those with less severe COPD, who may be less homebound, is not known. The aims of this feasibility study were to assess patient acceptability of the delivery mode and components of a comprehensive pulmonary rehabilitation programme for any stage of COPD, as well as the technology usability, patient outcomes and economic aspects. Ten participants with COPD in the Global Initiative for Chronic Obstructive Lung Disease (GOLD) grade I-IV were enrolled in a 9-week home programme and divided into two rehabilitation groups, with five patients in each group. The programme included exercise training and self-management education in online groups of patients, and individual online consultations. The patients also kept a digital health diary. To assess the acceptability of the programme, the patients were interviewed after the intervention using a semi-structured interview guide. In addition the number of sessions attended was observed. The usability of the technology was assessed using interviews and the System Usability Scale questionnaire. The St George's Respiratory Questionnaire (SGRQ) was used to measure health-related quality of life. The mode of delivery and the components of the programme were well accepted by the patients. The programme provided an environment for learning from both healthcare professionals and peers, for asking questions and discussing disease-related issues and for group exercising. The patients considered that it facilitated health-enhancing behaviours and social interactions with a social group formed among the participants. Even participants who were potentially less homebound appreciated the home group and social aspects of the programme. The participants found the technology easy to learn and use. The acceptability and usability results were consistent with those in our previous study of patients with very severe COPD. Only the mean change in the SGRQ total score of -6.53 (CI 95 % -0.38 to -12.68, p = 0.04) indicates a probable clinically significant effect. Economic calculations indicated that the cost of the programme was feasible. The results of this study indicate that comprehensive pulmonary rehabilitation delivered in home-based online groups may be feasible in COPD. The mode of delivery and components of the programme appeared to be acceptable across patients with different disease severity. The results in terms of patient outcomes are inconclusive, and further assessment is needed.

An Assessment of a Technology in Music Programme. Technical Report 91-2, Revised Version.

ERIC Educational Resources Information Center

Clarkson, Austin E.; Pegley, Karen

An innovative intermediate music programme was instituted at an elementary school in a middle class suburban area in Canada. The music teacher at the school designed a unique curriculum, the Technology in Music Programme (TIMP), for a classroom equipped with microcomputers, sequencers, drum machines, music instrument digital interface (MIDI)…

Dublin Institute of Technology's Programme for Students Learning with Communities: A Critical Account of Practice

ERIC Educational Resources Information Center

Gamble, Elena; Bates, Catherine

2011-01-01

Purpose: This paper aims to focus on the process of critically evaluating Dublin Institute of Technology's Programme for Students Learning With Communities after its first year of operation. The programme supports and promotes community-based learning/service-learning across DIT. Design/methodology/approach: The paper is presented in the form of a…

Enhanced technologies for unattended ground sensor systems

NASA Astrophysics Data System (ADS)

Hartup, David C.

2010-04-01

Progress in several technical areas is being leveraged to advantage in Unattended Ground Sensor (UGS) systems. This paper discusses advanced technologies that are appropriate for use in UGS systems. While some technologies provide evolutionary improvements, other technologies result in revolutionary performance advancements for UGS systems. Some specific technologies discussed include wireless cameras and viewers, commercial PDA-based system programmers and monitors, new materials and techniques for packaging improvements, low power cueing sensor radios, advanced long-haul terrestrial and SATCOM radios, and networked communications. Other technologies covered include advanced target detection algorithms, high pixel count cameras for license plate and facial recognition, small cameras that provide large stand-off distances, video transmissions of target activity instead of still images, sensor fusion algorithms, and control center hardware. The impact of each technology on the overall UGS system architecture is discussed, along with the advantages provided to UGS system users. Areas of analysis include required camera parameters as a function of stand-off distance for license plate and facial recognition applications, power consumption for wireless cameras and viewers, sensor fusion communication requirements, and requirements to practically implement video transmission through UGS systems. Examples of devices that have already been fielded using technology from several of these areas are given.

The CORSAGE Programme: Continuous Orbital Remote Sensing of Archipelagic Geochemical Effects

NASA Technical Reports Server (NTRS)

Acker, J. G.; Brown, C. W.; Hine, A. C.

1997-01-01

Current and pending oceanographic remote sensing technology allows the conceptualization of a programme designed to investigate ocean island interactions that could induce short-term nearshore fluxes of particulate organic carbon and biogenic calcium carbonate from pelagic island archipelagoes. These events will influence the geochemistry of adjacent waters, particularly the marine carbon system. Justification and design are provided for a study that would combine oceanographic satellite remote sensing (visible and infrared radiometry, altimetry and scatterometry) with shore-based facilities. A programme incorporating the methodology outlined here would seek to identify the mechanisms that cause such events, assess their geochemical significance, and provide both analytical and predictive capabilities for observations on greater temporal and spatial scales.

Basics and applications of genome editing technology.

PubMed

Yamamoto, Takashi; Sakamoto, Naoaki

2016-01-01

Genome editing with programmable site-specific nucleases is an emerging technology that enables the manipulation of targeted genes in many organisms and cell lines. Since the development of the CRISPR-Cas9 system in 2012, genome editing has rapidly become an indispensable technology for all life science researchers, applicable in various fields. In this seminar, we will introduce the basics of genome editing and focus on the recent development of genome editing tools and technologies for the modification of various organisms and discuss future directions of the genome editing research field, from basic to medical applications.

Environmental Models as a Service: Enabling Interoperability through RESTful Endpoints and API Documentation

EPA Science Inventory

Achieving interoperability in environmental modeling has evolved as software technology has progressed. The recent rise of cloud computing and proliferation of web services initiated a new stage for creating interoperable systems. Scientific programmers increasingly take advantag...

Environmental Models as a Service: Enabling Interoperability through RESTful Endpoints and API Documentation.

EPA Science Inventory

Achieving interoperability in environmental modeling has evolved as software technology has progressed. The recent rise of cloud computing and proliferation of web services initiated a new stage for creating interoperable systems. Scientific programmers increasingly take advantag...

Nanowire systems: technology and design

PubMed Central

Gaillardon, Pierre-Emmanuel; Amarù, Luca Gaetano; Bobba, Shashikanth; De Marchi, Michele; Sacchetto, Davide; De Micheli, Giovanni

2014-01-01

Nanosystems are large-scale integrated systems exploiting nanoelectronic devices. In this study, we consider double independent gate, vertically stacked nanowire field effect transistors (FETs) with gate-all-around structures and typical diameter of 20 nm. These devices, which we have successfully fabricated and evaluated, control the ambipolar behaviour of the nanostructure by selectively enabling one type of carriers. These transistors work as switches with electrically programmable polarity and thus realize an exclusive or operation. The intrinsic higher expressive power of these FETs, when compared with standard complementary metal oxide semiconductor technology, enables us to realize more efficient logic gates, which we organize as tiles to realize nanowire systems by regular arrays. This article surveys both the technology for double independent gate FETs as well as physical and logic design tools to realize digital systems with this fabrication technology. PMID:24567471

Field programmable chemistry: integrated chemical and electronic processing of informational molecules towards electronic chemical cells.

PubMed

Wagler, Patrick F; Tangen, Uwe; Maeke, Thomas; McCaskill, John S

2012-07-01

The topic addressed is that of combining self-constructing chemical systems with electronic computation to form unconventional embedded computation systems performing complex nano-scale chemical tasks autonomously. The hybrid route to complex programmable chemistry, and ultimately to artificial cells based on novel chemistry, requires a solution of the two-way massively parallel coupling problem between digital electronics and chemical systems. We present a chemical microprocessor technology and show how it can provide a generic programmable platform for complex molecular processing tasks in Field Programmable Chemistry, including steps towards the grand challenge of constructing the first electronic chemical cells. Field programmable chemistry employs a massively parallel field of electrodes, under the control of latched voltages, which are used to modulate chemical activity. We implement such a field programmable chemistry which links to chemistry in rather generic, two-phase microfluidic channel networks that are separated into weakly coupled domains. Electric fields, produced by the high-density array of electrodes embedded in the channel floors, are used to control the transport of chemicals across the hydrodynamic barriers separating domains. In the absence of electric fields, separate microfluidic domains are essentially independent with only slow diffusional interchange of chemicals. Electronic chemical cells, based on chemical microprocessors, exploit a spatially resolved sandwich structure in which the electronic and chemical systems are locally coupled through homogeneous fine-grained actuation and sensor networks and play symmetric and complementary roles. We describe how these systems are fabricated, experimentally test their basic functionality, simulate their potential (e.g. for feed forward digital electrophoretic (FFDE) separation) and outline the application to building electronic chemical cells. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Automated site characterization for robotic sample acquisition systems

NASA Astrophysics Data System (ADS)

Scholl, Marija S.; Eberlein, Susan J.

1993-04-01

A mobile, semiautonomous vehicle with multiple sensors and on-board intelligence is proposed for performing preliminary scientific investigations on extraterrestrial bodies prior to human exploration. Two technologies, a hybrid optical-digital computer system based on optical correlator technology and an image and instrument data analysis system, provide complementary capabilities that might be part of an instrument package for an intelligent robotic vehicle. The hybrid digital-optical vision system could perform real-time image classification tasks using an optical correlator with programmable matched filters under control of a digital microcomputer. The data analysis system would analyze visible and multiband imagery to extract mineral composition and textural information for geologic characterization. Together these technologies would support the site characterization needs of a robotic vehicle for both navigational and scientific purposes.

A digital front-end and readout microsystem for calorimetry at LHC

NASA Astrophysics Data System (ADS)

Alippi, C.; Appelquist, G.; Berglund, S.; Bohm, C.; Breveglieri, L.; Brigati, S.; Carlson, P.; Cattaneo, P.; Dadda, L.; David, J.; Del Buono, L.; Dell'Acqua, A.; Engström, M.; Fumagalli, G.; Gatti, U.; Genat, J. F.; Goggi, G.; Hansen, M.; Hentzell, H.; Höglund, I.; Inkinen, S.; Kerek, A.; Lebbolo, H.; LeDortz, O.; Lofstedt, B.; Maloberti, F.; Nayman, P.; Persson, S.-T.; Piuri, V.; Salice, F.; Sami, M.; Savoy-Navarro, A.; Stefanelli, R.; Sundblad, R.; Svensson, C.; Torelli, G.; Vanuxem, J. P.; Yamdagni, N.; Yuan, J.; Zitoun, R.

1994-04-01

A digital solution to the front-end electronics for calorimetric detectors at future supercolliders is presented. The solution is based on high speed {A}/{D} converters, a fully programmable pipeline/digital filter chain and local intelligence. Questions of error correction, fault-tolerance and system redundancy are also being considered. A system integration of a multichannel device in a multichip, Silicon-on-Silicon Microsystem hybrid, is used. This solution allows a new level of integration of complex analogue and digital functions, with an excellent flexibility in mixing technologies for the different functional blocks. It also allows a high degree of programmability at both the function and the system level, and offers the possibility of customising the microsystem with detector-specific functions.

Uptake of Space Technologies - An Educational Programme

NASA Astrophysics Data System (ADS)

Bacai, Hina; Zolotikova, Svetlana; Young, Mandy; Cowsill, Rhys; Wells, Alan; Monks, Paul; Archibald, Alexandra; Smith, Teresa

2013-04-01

Earth Observation data and remote sensing technologies have been maturing into useful tools that can be utilised by local authorities and businesses to aid in activates such as monitoring climate change trends and managing agricultural land and water uses. The European Earth observation programme Copernicus, previously known as GMES (Global Monitoring for Environment and Security), provides the means to collect and process multi-source EO and environmental data that supports policy developments at the European level. At the regional and local level, the Copernicus programme has been initiated through Regional Contact Office (RCO), which provide knowledge, training, and access to expertise both locally and at a European level through the network of RCOs established across Europe in the DORIS_Net (Downstream Observatory organised by Regions active In Space - Network) project (Grant Agreement No. 262789 Coordination and support action (Coordinating) FP7 SPA.2010.1.1-07 "Fostering downstream activities and links with regions"). In the East Midlands UK RCO, educational and training workshops and modules have been organised to highlight the wider range of tools and application available to businesses and local authorities in the region. Engagement with businesses and LRA highlighted the need to have a tiered system of training to build awareness prior to investigating innovative solutions and space technology uses for societal benefits. In this paper we outline education and training programmes which have been developed at G-STEP (GMES - Science and Technology Education Partnership), University of Leicester, UK to open up the Copernicus programme through the Regional Contact Office to downstream users such as local businesses and LRAs. Innovative methods to introduce the operational uses of Space technologies in real cases through e-learning modules and web-based tools will be described and examples of good practice for educational training in these sectors will be demonstrated. The results from these workshops and awareness building campaigns will show the end-user 'pull' in the uptake of remote sensing and Earth Observation data to implement successful Local Authority action plans and projects developing innovative solutions to critical Local Authority issues.

Practice-centred evaluation and the privileging of care in health information technology evaluation

PubMed Central

2014-01-01

Background Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts – can complement and in some instances offer advantages over, outcome-centric evaluation models. Methods We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An ‘action learning’ approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these activities we asked: how can a practice-centred approach be embedded into evaluation of health information technologies? Discussion Organising EPR and telemedicine evaluation around predetermined outcome measures alone can be impractical given the complex and contingent nature of such projects. It also limits the extent to which unforeseen outcomes and new capabilities are recognised. Such evaluations often fail to improve understanding of ‘when’ and ‘under what conditions’ technology-enabled service improvements are realised, and crucially, how such innovation improves care. Summary Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context ‘practice-centred’ evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. PMID:24903604

The Department of Defense Very High Speed Integrated Circuit (VHSIC) Technology Availability Program Plan for the Committees on Armed Services United States Congress.

DTIC Science & Technology

1986-06-30

features of computer aided design systems and statistical quality control procedures that are generic to chip sets and processes. RADIATION HARDNESS -The...System PSP Programmable Signal Processor SSI Small Scale Integration ." TOW Tube Launched, Optically Tracked, Wire Guided TTL Transistor Transitor Logic

Electromechanical Componentry. High-Technology Training Module.

ERIC Educational Resources Information Center

Lindemann, Don

This training module on electromechanical components contains 10 units for a two-year vocational program packaging system equipment control course at Wisconsin Indianhead Technical College. This module describes the functions of electromechanical devices essential for understanding input/output devices for Programmable Logic Control (PLC)…

Training Programme for Supervisors. An Element in Quality Assurance of the Construction Industry.

ERIC Educational Resources Information Center

Lo, Tommy Y.

1998-01-01

A customized program on concrete technology for the construction industry in Hong Kong is based on the ISO 9000 quality management system. More than 269 students have been trained; 48.7% of enrollment comes from concrete suppliers. (SK)

Environmental Models as a Service: Enabling Interoperability through RESTful Endpoints and API Documentation (presentation)

EPA Science Inventory

Achieving interoperability in environmental modeling has evolved as software technology has progressed. The recent rise of cloud computing and proliferation of web services initiated a new stage for creating interoperable systems. Scientific programmers increasingly take advantag...

Progress in preliminary studies at Ottana Solar Facility

NASA Astrophysics Data System (ADS)

Demontis, V.; Camerada, M.; Cau, G.; Cocco, D.; Damiano, A.; Melis, T.; Musio, M.

2016-05-01

The fast increasing share of distributed generation from non-programmable renewable energy sources, such as the strong penetration of photovoltaic technology in the distribution networks, has generated several problems for the management and security of the whole power grid. In order to meet the challenge of a significant share of solar energy in the electricity mix, several actions aimed at increasing the grid flexibility and its hosting capacity, as well as at improving the generation programmability, need to be investigated. This paper focuses on the ongoing preliminary studies at the Ottana Solar Facility, a new experimental power plant located in Sardinia (Italy) currently under construction, which will offer the possibility to progress in the study of solar plants integration in the power grid. The facility integrates a concentrating solar power (CSP) plant, including a thermal energy storage system and an organic Rankine cycle (ORC) unit, with a concentrating photovoltaic (CPV) plant and an electrical energy storage system. The facility has the main goal to assess in real operating conditions the small scale concentrating solar power technology and to study the integration of the two technologies and the storage systems to produce programmable and controllable power profiles. A model for the CSP plant yield was developed to assess different operational strategies that significantly influence the plant yearly yield and its global economic effectiveness. In particular, precise assumptions for the ORC module start-up operation behavior, based on discussions with the manufacturers and technical datasheets, will be described. Finally, the results of the analysis of the: "solar driven", "weather forecasts" and "combined storage state of charge (SOC)/ weather forecasts" operational strategies will be presented.

Fabrication of core-shell micro/nanoparticles for programmable dual drug release by emulsion electrospraying

NASA Astrophysics Data System (ADS)

Wang, Yazhou; Zhang, Yiqiong; Wang, Bochu; Cao, Yang; Yu, Qingsong; Yin, Tieying

2013-06-01

The study aimed at constructing a novel drug delivery system for programmable multiple drug release controlled with core-shell structure. The core-shell structure consisted of chitosan nanoparticles as core and polyvinylpyrrolidone micro/nanocoating as shell to form core-shell micro/nanoparticles, which was fabricated by ionic gelation and emulsion electrospray methods. As model drug agents, Naproxen and rhodamine B were encapsulated in the core and shell regions, respectively. The core-shell micro/nanoparticles thus fabricated were characterized and confirmed by scanning electron microscope, transmission electron microscope, and fluorescence optical microscope. The core-shell micro/nanoparticles showed good release controllability through drug release experiment in vitro. It was noted that a programmable release pattern for dual drug agents was also achieved by adjusting their loading regions in the core-shell structures. The results indicate that emulsion electrospraying technology is a promising approach in fabrication of core-shell micro/nanoparticles for programmable dual drug release. Such a novel multi-drug delivery system has a potential application for the clinical treatment of cancer, tuberculosis, and tissue engineering.

Spring Seminars Report. Information Technology and Education Programme. Occasional Paper ITE/3/85.

ERIC Educational Resources Information Center

Lewis, R.

This report contains excerpts from papers and summaries of discussions and program actions carried out during a series of seminars held to establish research priorities under the Information Technology and Education Programme (ITE) in the United Kingdom. The seminar on "Information Technology" (IT) included Kenneth Ruthven's…

Technology Enhanced Learning: A Case Study of NPTEL

ERIC Educational Resources Information Center

Nitonde, Rohidas

2018-01-01

Technology Enhanced Learning (TEL) is a major 21st century trend in Higher Education. There are several government initiatives in India towards e-learning. National Programme on Technology Enhanced Learning (NPTEL) is one of the major initiatives. The present paper is an assessment of various aspects of this programme. It aims at evaluating the…

Experimental investigations into cryosorption pumping of plasma exhaust

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perinic, D.; Mack, A.

1988-09-01

Within the framework of the European Fusion Technology Programme the Karlsruhe Nuclear Research Centre has been awarded a contract for the development of cryosorption panels for compound cryopumps of the NEt plasma exhaust pumping system. This task includes the development of a bonding technique for porous sorbent materials with metal substrates and a test programme for development and optimization of cryopanels. A variety of material combinations for sorbent, bonding and substrate were evaluated and listed in a test matrix. Bonding tests involving soldering, cementing and plasma spraying techniques have been carried out.

A basic technology-aided programme for leisure and communication of persons with advanced amyotrophic lateral sclerosis: performance and social rating.

PubMed

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; D'Amico, Fiora; Ferlisi, Gabriele; Zullo, Valeria; Denitto, Floriana; Lauta, Enrico; Abbinante, Crescenza; Pesce, Caterina V

2017-02-01

This study assessed (a) the impact of a technology-aided programme on the leisure and communication engagement of persons with advanced amyotrophic lateral sclerosis (ALS) and (b) the opinion of rehabilitation and care personnel regarding the programme. The programme's impact was assessed with four participants who were allowed to activate leisure and communication options through basic responses (e.g. knee, finger or lip movements) and microswitches. Forty-two care and health professionals rated the programme after watching video clips of persons with ALS (three of the four involved in this study and three involved in previous studies) during and outside of the programme. The programme was effective with all participants. Their mean percentages of session time with independently initiated leisure and communication engagements were zero during baseline and increased to between nearly 70 and 80 during the intervention. The care and health professionals rated the technology-aided programme as beneficial for the participants' positive engagement and social image, fairly practical for daily contexts and interesting from a personal standpoint. The programme might be viewed as a viable resource for persons with advanced ALS. Implications for Rehabilitation A programme characterised by versatility, simplicity and relatively low cost could be considered practically relevant for persons with ALS and their contexts. A programme that is effective in fostering participants' independent leisure and communication engagement and is positively rated by care and rehabilitation personnel is more likely to be accepted and used with consistency. Any programme directed at persons affected by ALS needs to be adapted to the persons' progressive deterioration, starting from the response and microswitch used for accessing the programme's options.

Digital Technologies Jump Start Telemedicine

ERIC Educational Resources Information Center

Pierce, Alan

2011-01-01

The technologists, research doctors, computer programmers, electrical engineers, and biomedical engineers who design and create new medical diagnostic equipment and medical treatments are now working on medical systems that use the computing power of personal computers and cell phones. For disease diagnosis, they are finding ways to shrink…

A Review of NICE Methods and Processes Across Health Technology Assessment Programmes: Why the Differences and What is the Impact?

PubMed

Cowles, Emma; Marsden, Grace; Cole, Amanda; Devlin, Nancy

2017-08-01

Decisions made by the National Institute for Health and Care Excellence (NICE) exert an influence on the allocation of resources within 'fixed' National Health Service budgets. Yet guidance for different types of health interventions is handled via different 'programmes' within NICE, which follow different methods and processes. The objective of this research was to identify differences in the processes and methods of NICE health technology assessment programmes and to explore how these could impact on allocative efficiency within the National Health Service. Data were extracted from the NICE technology appraisal programme, medical technologies guidance, diagnostic assessment programme, highly specialised technologies programme, and clinical guidelines process and methods manuals to undertake a systematic comparison. Five qualitative interviews were carried out with NICE members of staff and committee members to explore the reasons for the differences found. The main differences identified were in the required evidence review period, or lack thereof, mandatory funding status, the provision of a reference case for economic evaluation, the requirement for and the type of economic analysis undertaken, and the decision making criteria used for appraisal. Many of the differences found can be justified on grounds of practicality and relevance to the health technologies under assessment. Nevertheless, from a strict utilitarian view, there are several potential areas of inefficiency that could lead to the misallocation of resources within the National Health Service, although some of these might be eliminated or reduced if an egalitarian view is taken. The challenge is determining where society is willing to trade health gains between different people.

A 6-Month Follow-Up of the Effects of an Information and Communication Technology (ICT) Training Programme on People with Intellectual Disabilities

ERIC Educational Resources Information Center

Li-Tsang, Cecilia W. P.; Lee, Maggie Y. F.; Yeung, Susanna S. S.; Siu, Andrew M. H.; Lam, C. S.

2007-01-01

We investigated the long-term effects of an information and communication technology (ICT) training programme for people with intellectual disabilities (ID). A community-based ICT training programme was designed to enhance the computer skills of people with ID and prepare them to make use of ICT in their daily life. Of the 100 who had participated…

CMC thermal protection system for future reusable launch vehicles: Generic shingle technological maturation and tests

NASA Astrophysics Data System (ADS)

Pichon, T.; Barreteau, R.; Soyris, P.; Foucault, A.; Parenteau, J. M.; Prel, Y.; Guedron, S.

2009-07-01

Experimental re-entry demonstrators are currently being developed in Europe, with the objective of increasing the technology readiness level (TRL) of technologies applicable to future reusable launch vehicles. Among these are the Pre-X programme, currently funded by CNES, the French Space Agency, and which is about to enter into development phase B, and the IXV, within the future launcher preparatory programme (FLPP) funded by ESA. One of the major technologies necessary for such vehicles is the thermal protection system (TPS), and in particular the ceramic matrix composites (CMC) based windward TPS. In support of this goal, technology maturation activities named "generic shingle" were initiated beginning of 2003 by SPS, under a CNES contract, with the objective of performing a test campaign of a complete shingle of generic design, in preparation of the development of a re-entry experimental vehicle decided in Europe. The activities performed to date include: the design, manufacturing of two C/SiC panels, finite element model (FEM) calculation of the design, testing of technological samples extracted from a dedicated panel, mechanical pressure testing of a panel, and a complete study of the attachment system. Additional testing is currently under preparation on the panel equipped with its insulation, seal, attachment device, and representative portion of cold structure, to further assess its behaviour in environments relevant to its application The paper will present the activities that will have been performed in 2006 on the prediction and preparation of these modal characterization, dynamic, acoustic as well as thermal and thermo-mechanical tests. Results of these tests will be presented and the lessons learned will be discussed.

Space Nuclear Power and Propulsion - a basic Tool for the manned Exploration of the Solar System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frischauf, Norbert; Hamilton, Booz Allen

2004-07-01

Humanity has started to explore space more than 40 years ago. Numerous spacecraft have left the Earth in this endeavour, but while unmanned spacecraft were already sent out on missions, where they would eventually reach the outer limits of the Solar System, manned exploration has always been confined to the tiny bubble of the Earth's gravitational well, stretching out at maximum to our closest celestial companion - the Moon - during the era of the Apollo programme in the late 60's and early 70's. When mankind made its giant leap, the exploration of our cosmic neighbour was seen as themore » initial step for the manned exploration of the whole Solar System. Consequently ambitious research and development programmes were undertaken at that time to enable what seemed to be the next logical steps: the establishment of a permanent settled base on the Moon and the first manned mission to Mars in the 80's. Nuclear space power and propulsion played an important role in these entire future scenarios, hence ambitious development programmes were undertaken to make these technologies available. Unfortunately the 70's-paradigm shift in space policies did not only bring an end to the Apollo programme, but it also brought a complete halt to all of these technology programmes and confined the human presence in space to a tiny bubble including nothing more than the Earth's sphere and a mere shell of a few hundred kilometres of altitude, too small to even include the Moon. Today, after more than three decades, manned exploration of the Solar System has become an issue again and so are missions to Moon and Mars. However, studies and analyses show that all of these future plans are hampered by today's available propulsion systems and by the problematic of solar power generation at distances at and beyond of Mars, a problem, however, that can readily be solved by the utilisation of space nuclear reactors and propulsion systems. This paper intends to provide an overview on the various fission- and fusion-based Nuclear Power and Propulsion system concepts and tries to compare these systems' different working principles and technical implementations with each other. The overview and comparison will be complemented by a closer look at ongoing activities related to research and development in this area and by an outlook on what kind of systems might be employed to carry the first astronauts to Mars and beyond. (autho0008.« less

The role of small satellites in the development of the South African space programme

NASA Astrophysics Data System (ADS)

Martinez, Peter

In the 1990s a team of scientists and engineers at Stellenbosch University built the first South African satellite to fly in space, the 64-kg Sunsat. This university-based satellite programme took advantage of the skills and facilities developed in the previous South African space programme of the 1980s and early 1990s, which had developed a much larger satellite (Greensat), but was cancelled in the mid-1990s prior to launch. Sunsat incorporated a number of novel capabilities for a microsatellite platform, and interest was shown in these technologies by other groups developing similar satellites. As the University was not the ideal environment to develop the commercial potential of these microsatellite technologies, a company called Sunspace was later established, thus creating industrial capacity in South Africa in a niche area of space technology. This new industrial capability, together with the infrastructure from the previous space programme, have created a foundation upon which to build the new South African space programme. This paper discusses the historical, current and possible future roles of small satellites in the development of the South African space programme.

The Effects of Architecture and Process on the Hardness of Programmable Technologies

NASA Technical Reports Server (NTRS)

Katz, Richard; Wang, J. J.; Reed, R.; Kleyner, I.; DOrdine, M.; McCollum, J,; Cronquist, B.; Howard, J.

1999-01-01

Architecture and process, combined, significantly affect the hardness of programmable technologies. The effects of high energy ions, ferroelectric memory architectures, and shallow trench isolation are investigated. A detailed single event latchup (SEL) study has been performed.

Functional Electrical Therapy Systems: Neuroprostheses for Life-Like Reach and Grasp

DTIC Science & Technology

2001-10-25

communication channel by means of an infrared link. Keywords – Neuroprosthesis, therapy, reaching, grasping I. INTRODUCTION Functional electrical...present technology and the next generation. Proc 2nd Int Symp IFESS, Burnaby, pp 139-140, 1997. [7] Ocadiz G, Mayagoitia RE. Programmable eight channel

CRISPR Genome Engineering for Human Pluripotent Stem Cell Research

PubMed Central

Chaterji, Somali; Ahn, Eun Hyun; Kim, Deok-Ho

2017-01-01

The emergence of targeted and efficient genome editing technologies, such as repurposed bacterial programmable nucleases (e.g., CRISPR-Cas systems), has abetted the development of cell engineering approaches. Lessons learned from the development of RNA-interference (RNA-i) therapies can spur the translation of genome editing, such as those enabling the translation of human pluripotent stem cell engineering. In this review, we discuss the opportunities and the challenges of repurposing bacterial nucleases for genome editing, while appreciating their roles, primarily at the epigenomic granularity. First, we discuss the evolution of high-precision, genome editing technologies, highlighting CRISPR-Cas9. They exist in the form of programmable nucleases, engineered with sequence-specific localizing domains, and with the ability to revolutionize human stem cell technologies through precision targeting with greater on-target activities. Next, we highlight the major challenges that need to be met prior to bench-to-bedside translation, often learning from the path-to-clinic of complementary technologies, such as RNA-i. Finally, we suggest potential bioinformatics developments and CRISPR delivery vehicles that can be deployed to circumvent some of the challenges confronting genome editing technologies en route to the clinic. PMID:29158838

Research based on the SoPC platform of feature-based image registration

NASA Astrophysics Data System (ADS)

Shi, Yue-dong; Wang, Zhi-hui

2015-12-01

This paper focuses on the study of implementing feature-based image registration by System on a Programmable Chip (SoPC) hardware platform. We solidify the image registration algorithm on the FPGA chip, in which embedded soft core processor Nios II can speed up the image processing system. In this way, we can make image registration technology get rid of the PC. And, consequently, this kind of technology will be got an extensive use. The experiment result indicates that our system shows stable performance, particularly in terms of matching processing which noise immunity is good. And feature points of images show a reasonable distribution.

Insulin Delivery System

NASA Technical Reports Server (NTRS)

1988-01-01

When Programmable Implantable Medication System (PIMS) is implanted in human body, it delivers precise programmed amounts of insulin over long periods of time. Mini-Med Technologies has been refining the Technologies since initial development at APL. The size of a hockey puck, and encased in titanium shell, PIMS holds about 2 1/2 teaspoons of insulin at a programmed basal rate. If a change in measured blood sugar level dictates a different dose, the patient can vary the amount of insulin delivered by holding a small radio transceiver over the implanted system and dialing in a specific program held in the PIMS computer memory. Insulin refills are accomplished approximately 4 times a year by hypodermic needle.

Logistics engineering education from the point of view environment

NASA Astrophysics Data System (ADS)

Bányai, Ágota

2010-05-01

A new field of MSc programme offered by the Faculty of Mechanical Engineering and Informatics of the University of Miskolc is represented by the programme in logistics engineering. The Faculty has always laid great emphasis on assigning processes connected with environment protection and globalisation issues the appropriate weight in its programmes. This is based on the fact that the Faculty has initiated and been involved in a great number of research and development projects with a substantial emphasis on the fundamental principles of sustainable development. The objective of the programme of logistics engineering is to train engineers who, in possession of the science, engineering, economic, informatics and industrial, transportation technological knowledge related to the professional field of logistics, are able to analyse, design, organise, and control logistics processes and systems (freight transportation, materials handling, storage, commissioning, loading, purchasing, distribution and waste management) as well as to design and develop machinery and equipment as the elements of logistic systems and also to be involved in their manufacture and quality control and are able to control their operation. The programme prepares its students for performing the logistics management tasks in a company, for creative participation in solving research and development problems in logistics and for pursuing logistics studies in doctoral programmes. There are several laboratories available for practice-oriented training. The 'Integrated Logistics Laboratory' consists of various fixed and mobile, real industrial, i.e. not model-level equipment, the integration of which in one system facilitates not only the presentation, examination and development of the individual self-standing facilities, but the study of their interaction as well in terms of mechatronics, engineering, control engineering, informatics, identification technology and logistics. The state-of-the-art, reliable, automated mechatronics-material flow system with its single control engineering system provides the academic staff with up-to-date research facilities, and enables the students to study sophisticated equipment and systems that could also operate under industrial conditions, thus offering knowledge that can be efficiently utilised in the industry after graduation. The laboratory measurements of the programme in logistics engineering are performed in this laboratory, and they are supplemented by the theoretical and practical measurements in the ‘Robotic Technology Assembly Laboratory', the ‘Power Electronics Laboratory', the ‘Mechatronics Laboratory', the ‘CAD/CAM Laboratory' and the ‘Acoustics and Product Laboratory'. The bodies of knowledge connected with environment protection and sustainable development can be grouped around three large topic areas. In environmental economics the objective is to present the corporate-organisational aspects of environmental management. Putting environmental management in the focal point, the objective of the programme is to impart knowledge that can be utilised in practice which can be used to shift the relation between the organisation and its environment in the direction of sustainability. The tools include environmental controlling, environmental marketing and various solutions of environmental performance evaluation. The second large topic area is globalization and its logistic aspects. In the field of global logistics the following knowledge carries special weight: logistic challenges in a globalised world; the concept of global logistics, its conditions and effects; delayed manufacture, assembly, packaging; the economic investigation of delayed assembly; globalised purchase and distribution in logistics; the logistic features of the globalised production supply/distribution chain; meta-logistics systems; logistics-related EU harmonisation issues; the effect of e-commerce on the global logistic system; logistic centres, connecting virtual logistic companies in a network; the environmental harmonisation of international transportation. The third large area is recycling logistics. Here the bodies of knowledge are as follows: the concept of developing a ‘closed-loop economy'; stages in the progress of products after discarding, connections between the uses of waste collection, processing, selection, deposition or reuse processes; features of European recommendations (e.g. EMAS), harmonisation of national practices and global solutions; presenting the logistics part-processes of recycling; presenting process organisation procedures for the foundation of designing one-route, multi-route, replacement container waste collecting and distributing part systems; recycling strategies with consideration of logistically serving the separation and storage of waste to be deposited, the technological processing systems of recyclable materials; presenting dismantling and product and material identification technologies, presenting logistics part-tasks, analysis of technical solutions; IT solutions for identifying products and their elements to be distributed and withdrawn from distribution after use (e.g. RFID systems) and monitoring their material flow; methodology of using efficiency analyses and incentive systems in the decision making processes of recycling processes, risk analysis for evaluating typical part processes; the methodology of recycling-oriented product design for specific product groups. Graduates of the Master programmes are able to use and utilise the knowledge obtained in practice, use problem-solving techniques; process the information, new problems and new phenomena arising in the border areas of the professional experience gained the discipline; formulate substantial criticism and opinions as far as possible, make decisions and draw conclusions; comprehending and solving the problems arising, suggesting original ideas; plan and perform tasks independently at a high professional standard; improve themselves, develop their knowledge to higher levels; view the management of technical/engineering - economic - human resources in a complex way; design complex systems in a global way based on a system-oriented and process-oriented way of thinking; use integrated knowledge from the professional fields of transport, mobile machinery, process theory, industrial production processes, electronics and informatics; combine the part processes of logistics systems and the part units performing their physical realisation (materials handling equipment, sensors, actuators, control systems, and database systems, etc.); perform state evaluations depending on their specialisation, use them to elaborate evaluations and recommendations, develop complex logistic systems, design, organise and control them at the highest level. This work was implemented with support by the European Union and co-funding of the European Social Fund.

Feasibility of a real-time hand hygiene notification machine learning system in outpatient clinics.

PubMed

Geilleit, R; Hen, Z Q; Chong, C Y; Loh, A P; Pang, N L; Peterson, G M; Ng, K C; Huis, A; de Korne, D F

2018-04-09

Various technologies have been developed to improve hand hygiene (HH) compliance in inpatient settings; however, little is known about the feasibility of machine learning technology for this purpose in outpatient clinics. To assess the effectiveness, user experiences, and costs of implementing a real-time HH notification machine learning system in outpatient clinics. In our mixed methods study, a multi-disciplinary team co-created an infrared guided sensor system to automatically notify clinicians to perform HH just before first patient contact. Notification technology effects were measured by comparing HH compliance at baseline (without notifications) with real-time auditory notifications that continued till HH was performed (intervention I) or notifications lasting 15 s (intervention II). User experiences were collected during daily briefings and semi-structured interviews. Costs of implementation of the system were calculated and compared to the current observational auditing programme. Average baseline HH performance before first patient contact was 53.8%. With real-time auditory notifications that continued till HH was performed, overall HH performance increased to 100% (P < 0.001). With auditory notifications of a maximum duration of 15 s, HH performance was 80.4% (P < 0.001). Users emphasized the relevance of real-time notification and contributed to technical feasibility improvements that were implemented in the prototype. Annual running costs for the machine learning system were estimated to be 46% lower than the observational auditing programme. Machine learning technology that enables real-time HH notification provides a promising cost-effective approach to both improving and monitoring HH, and deserves further development in outpatient settings. Copyright © 2018 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Dental nursing education and the introduction of technology-assisted learning.

PubMed

Sheridan, C; Gorman, T; Claffey, N

2008-11-01

The aim of this paper is to explore the profile of dental nursing students in the National Dental Nurse Training Programme of Ireland and their adjustment to a technology-assisted learning environment. Evaluation by students of the course and their reactions to the course were analysed. Dental nurses must possess the skills and knowledge to proficiently function in the modern day dental surgery. The implementation of a dental nurse programme that is heavily reliant on technology has started to create a group of dental nurses equipped with basic skills to access and retrieve information over a lifetime. However, the transition to a technology-assisted learning environment including online learning activities requires adaptation and expertise by educators and students alike. Careful evaluation and stakeholder feedback is imperative in the creation and maintaining of a quality programme. In conclusion, the students in this study responded well to the transition to a technology-based learning environment. Furthermore, the findings of this study suggest that the use of an online environment is an effective and stimulating learning environment for the students of a dental nurse programme; however, familiarity skills and knowledge of information technology is a prerequisite for success.

Virtual Reality: Is It for Real?

ERIC Educational Resources Information Center

Dowding, Tim J.

1994-01-01

Defines virtual reality and describes its application to psychomotor skills training. A description of a system that could be used to teach a college course in physical therapy, including the use of miniature computer workstation, sensory gloves, a programmable mannequin, and other existing technology, is provided. (Contains 10 references.) (KRN)

Going beyond Fun in STEM

ERIC Educational Resources Information Center

Pittinsky, Todd L.; Diamante, Nicole

2015-01-01

The United States education system must improve its ability to produce scientists, engineers, and programmers. Despite numerous national, state, and local efforts to make the study of STEM (science, technology, engineering, and mathematics) subjects more fun in K-12, initial interest in those subjects drops off precipitously in middle and later…

Mission Specific Platforms: Past achievements and future developments in European led ocean research drilling.

NASA Astrophysics Data System (ADS)

Cotterill, Carol; McInroy, David; Stevenson, Alan

2013-04-01

Mission Specific Platform (MSP) expeditions are operated by the European Consortium for Ocean Research Drilling (ECORD). Each MSP expedition is unique within the Integrated Ocean Drilling Program (IODP). In order to complement the abilities of the JOIDES Resolution and the Chikyu, the ECORD Science Operator (ESO) must source vessels and technology suitable for each MSP proposal on a case-by-case basis. The result is that ESO can meet scientific requirements in a flexible manner, whilst maintaining the measurements required for the IODP legacy programme. The process of tendering within EU journals for vessels and technology means that the planning process for each MSP Expedition starts many years in advance of the operational phase. Involvement of proposal proponents from this early stage often leads to the recognition for technological research and development to best meet the scientific aims and objectives. One example of this is the planning for the Atlantis Massif proposal, with collaborative development between the British Geological Survey (BGS) and MARUM, University of Bremen, on suitable instruments for seabed drills, with the European Petrophysics Consortium (EPC) driving the development of suitable wireline logging tools that can be used in association with such seabed systems. Other technological developments being undertaken within the European IODP community include in-situ pressure sampling for gas hydrate expeditions, deep biosphere and fluid sampling equipment and CORK technology. This multi-national collaborative approach is also employed by ESO in the operational phase. IODP Expedition 302 ACEX saw vessel and ice management support from Russia and Sweden to facilitate the first drilling undertaken in Arctic sea ice. A review of MSP expeditions past, present and future reveal the significant impact of European led operations and scientific research within the current IODP programme, and also looking forward to the start of the new International Ocean Discovery Programme in October 2013. Key successes encompass technological development, operational procedures in sensitive areas and research into palaeoclimate and shoreline responses to sea level change amongst others. Increased operational flexibility in the new programme only serves to make the future an exciting one for ocean drilling in Europe.

The NIHR Invention for Innovation (i4i) Programme: A Review of Progress and Contributions to Innovation in Healthcare Technologies.

PubMed

Marjanovic, Sonja; Krapels, Joachim; Sousa, Sonia; Castle-Clarke, Sophie; Horvath, Veronika; Chataway, Joanna

2015-11-30

The National Institute for Health Research (NIHR) Invention for Innovation (i4i) programme supports the development of innovative medical technologies for patient benefit. The i4i product development stream involves collaborative projects between at least two partners from academia, the NHS and industry. Medical technology innovators apply for funding for one to three years, through a peer review-based process that includes presentation to a selection panel. The funding and business advice provided by i4i support the development of early-stage innovations, generally at proof of concept and prototype stages. Since its inception the product development stream has identified and supported 170 projects, led by 146 principal investigators (PIs). RAND Europe evaluated the programme, with the aim of identifying its outputs and impacts and examining the factors influencing performance. The evaluation findings should help inform the future of the programme. The evaluation used a multi-method approach, including a focused review of background information from i4i, scoping interviews with key informants, a survey of programme participants and case studies of projects representing diverse technologies and health needs.

Sensor Systems for Space Life Sciences

NASA Technical Reports Server (NTRS)

Somps, Chris J.; Hines, John W.; Connolly, John P. (Technical Monitor)

1995-01-01

Sensors 2000! (S2K!) is a NASA Ames Research Center engineering initiative designed to provide biosensor and bio-instrumentation systems technology expertise to NASA's life sciences spaceflight programs. S2K! covers the full spectrum of sensor technology applications, ranging from spaceflight hardware design and fabrication to advanced technology development, transfer and commercialization. S2K! is currently developing sensor systems for space biomedical applications on BION (a Russian biosatellite focused on Rhesus Monkey physiology) and NEUROLAB (a Space Shuttle flight devoted to neuroscience). It's Advanced Technology Development-Biosensors (ATD-B) project focuses efforts in five principle areas: biotelemetry Systems, chemical and biological sensors, physiological sensors, advanced instrumentation architectures, and data and information management. Technologies already developed and tested included, application-specific sensors, preamplifier hybrids, modular programmable signal conditioners, power conditioning and distribution systems, and a fully implantable dual channel biotelemeter. Systems currently under development include a portable receiver system compatible with an off-the-shelf analog biotelemeter, a 4 channel digital biotelemetry system which monitors pH, a multichannel, g-processor based PCM biotelemetry system, and hand-held personal monitoring systems. S2K! technology easily lends itself to telescience and telemedicine applications as a front-end measurement and data acquisition device, suitable for obtaining and configuring physiological information, and processing that information under control from a remote location.

Outcomes for Engineering Students Delivering a STEM Education and Outreach Programme

ERIC Educational Resources Information Center

Fitzallen, Noleine; Brown, Natalie Ruth

2017-01-01

University science outreach programmes are used to encourage more school students to select science, technology, engineering, and mathematics (STEM) subjects in further education and pursue science-related careers. The benefits of science outreach programmes are often espoused from the perspective of programme participants. Little attention,…

Collaborative Doctoral Programmes: Employer Engagement, Knowledge Mediation and Skills for Innovation

ERIC Educational Resources Information Center

Kitagawa, Fumi

2014-01-01

This paper investigates forms of collaborative doctoral programmes that enable employer engagement in innovation and skills development. Collaborative doctoral programmes exist in different national contexts for the development of the science and technology human capital. Such programmes are also seen as policy tools that enhance relationships…

Process development for automated solar cell and module production. Task 4: Automated array assembly

NASA Technical Reports Server (NTRS)

1980-01-01

A process sequence which can be used in conjunction with automated equipment for the mass production of solar cell modules for terrestrial use was developed. The process sequence was then critically analyzed from a technical and economic standpoint to determine the technological readiness of certain process steps for implementation. The steps receiving analysis were: back contact metallization, automated cell array layup/interconnect, and module edge sealing. For automated layup/interconnect, both hard automation and programmable automation (using an industrial robot) were studied. The programmable automation system was then selected for actual hardware development.

Towards an autonomous telescope system: the Test-Bed Telescope project

NASA Astrophysics Data System (ADS)

Racero, E.; Ocaña, F.; Ponz, D.; the TBT Consortium

2015-05-01

In the context of the Space Situational Awareness (SSA) programme of ESA, it is foreseen to deploy several large robotic telescopes in remote locations to provide surveillance and tracking services for man-made as well as natural near-Earth objects (NEOs). The present project, termed Telescope Test Bed (TBT) is being developed under ESA's General Studies and Technology Programme, and shall implement a test-bed for the validation of an autonomous optical observing system in a realistic scenario, consisting of two telescopes located in Spain and Australia, to collect representative test data for precursor NEO services. It is foreseen that this test-bed environment will be used to validate future prototype software systems as well as to evaluate remote monitoring and control techniques. The test-bed system will be capable to deliver astrometric and photometric data of the observed objects in near real-time. This contribution describes the current status of the project.

Financial sustainability planning for immunization services in Cambodia.

PubMed

Soeung, Sann Chan; Grundy, John; Maynard, Jim; Brooks, Alan; Boreland, Marian; Sarak, Duong; Jenkinson, Karl; Biggs, Beverley-Ann

2006-07-01

The expanded programme of immunization was established in Cambodia in 1986. In 2002, 67% of eligible children were immunized, despite significant health sector and macro-economic financial constraints. A financial sustainability planning process for immunization was introduced in 2002, in order to mobilize national and international resources in support of the achievement of child health objectives. The aim of this paper is to outline this process, describe its early impact as an advocacy tool and recommend additional strategies for mobilizing additional resources for health. The methods of financial sustainability planning are described, including the advocacy strategies that were applied. Analysis of financial sustainability planning results indicates rising programme costs associated with new vaccine introduction and new technologies. Despite this, the national programme has demonstrated important early successes in using financial sustainability planning to advocate for increased mobilization of national and international sources of funding for immunization. The national immunization programme nevertheless faces formidable system and financial challenges in the coming years associated with rising costs, potentially diminishing sources of international assistance, and the developing role of sub-national authorities in programme management and financing.

Genome Modification Technologies and Their Applications in Avian Species.

PubMed

Lee, Hong Jo; Kim, Young Min; Ono, Tamao; Han, Jae Yong

2017-10-26

The rapid development of genome modification technology has provided many great benefits in diverse areas of research and industry. Genome modification technologies have also been actively used in a variety of research areas and fields of industry in avian species. Transgenic technologies such as lentiviral systems and piggyBac transposition have been used to produce transgenic birds for diverse purposes. In recent years, newly developed programmable genome editing tools such as transcription activator-like effector nuclease (TALEN) and clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (CRISPR/Cas9) have also been successfully adopted in avian systems with primordial germ cell (PGC)-mediated genome modification. These genome modification technologies are expected to be applied to practical uses beyond system development itself. The technologies could be used to enhance economic traits in poultry such as acquiring a disease resistance or producing functional proteins in eggs. Furthermore, novel avian models of human diseases or embryonic development could also be established for research purposes. In this review, we discuss diverse genome modification technologies used in avian species, and future applications of avian biotechnology.

Genome Modification Technologies and Their Applications in Avian Species

PubMed Central

Lee, Hong Jo; Kim, Young Min; Ono, Tamao

2017-01-01

The rapid development of genome modification technology has provided many great benefits in diverse areas of research and industry. Genome modification technologies have also been actively used in a variety of research areas and fields of industry in avian species. Transgenic technologies such as lentiviral systems and piggyBac transposition have been used to produce transgenic birds for diverse purposes. In recent years, newly developed programmable genome editing tools such as transcription activator-like effector nuclease (TALEN) and clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (CRISPR/Cas9) have also been successfully adopted in avian systems with primordial germ cell (PGC)-mediated genome modification. These genome modification technologies are expected to be applied to practical uses beyond system development itself. The technologies could be used to enhance economic traits in poultry such as acquiring a disease resistance or producing functional proteins in eggs. Furthermore, novel avian models of human diseases or embryonic development could also be established for research purposes. In this review, we discuss diverse genome modification technologies used in avian species, and future applications of avian biotechnology. PMID:29072628

Leading Practice in Space Education: Successful Approaches by Specialist Schools

ERIC Educational Resources Information Center

Schools Network, 2010

2010-01-01

The aim of the Government's Science, Technology, Engineering and Mathematics (STEM) programme is to ensure Britain's future success as a major centre for science, engineering and innovation. Specialist science, technology, engineering and maths & computing colleges help to drive this programme by becoming centres of excellence in STEM…

Evaluating the Design and Development of an Adaptive E-Tutorial Module: A Rasch-Measurement Approach

ERIC Educational Resources Information Center

Barefah, Allaa; McKay, Elspeth

2016-01-01

Courseware designers aim to innovate information communications technology (ICT) tools to increase learning experiences, spending many hours developing eLearning programmes. This effort gives rise to a dynamic technological pedagogical environment. However, it is difficult to recognise whether these online programmes reflect an instructional…

Australian Transnational Education Programmes in South East Asia: Student Satisfaction with the Learning Environment

ERIC Educational Resources Information Center

Miliszewska, Iwona; Sztendur, Ewa M.

2012-01-01

In view of the strong growth of transnational education programmes in Australian universities, there is growing interest in the experiences of students participating in such programmes. This article reports on the perceived student satisfaction with several aspects of their transnational programmes, including instructors, technology, and programme…

Hybrid breeding in wheat: technologies to improve hybrid wheat seed production.

PubMed

Whitford, Ryan; Fleury, Delphine; Reif, Jochen C; Garcia, Melissa; Okada, Takashi; Korzun, Viktor; Langridge, Peter

2013-12-01

Global food security demands the development and delivery of new technologies to increase and secure cereal production on finite arable land without increasing water and fertilizer use. There are several options for boosting wheat yields, but most offer only small yield increases. Wheat is an inbred plant, and hybrids hold the potential to deliver a major lift in yield and will open a wide range of new breeding opportunities. A series of technological advances are needed as a base for hybrid wheat programmes. These start with major changes in floral development and architecture to separate the sexes and force outcrossing. Male sterility provides the best method to block self-fertilization, and modifying the flower structure will enhance pollen access. The recent explosion in genomic resources and technologies provides new opportunities to overcome these limitations. This review outlines the problems with existing hybrid wheat breeding systems and explores molecular-based technologies that could improve the hybrid production system to reduce hybrid seed production costs, a prerequisite for a commercial hybrid wheat system.

A Feasibility Study on the Application of the ScriptGenE Framework as an Anomaly Detection System in Industrial Control Systems

DTIC Science & Technology

2015-09-17

network intrusion detection systems NIST National Institute of Standards and Technology p-tree protocol tree PI protocol informatics PLC programmable logic...electrical, water, oil , natural gas, manufacturing, and pharmaceutical industries, to name a few. The differences between SCADA and DCS systems are often... Oil Company, also known as Saudi Aramco, suffered huge data loss that resulted in the disruption of daily operations for nearly two weeks [BTR13]. As it

ESA's satellite communications programme

NASA Astrophysics Data System (ADS)

Bartholome, P.

1985-02-01

The developmental history, current status, and future plans of the ESA satellite-communications programs are discussed in a general survey and illustrated with network diagrams and maps. Consideration is given to the parallel development of national and European direct-broadcast systems and telecommunications networks, the position of the European space and electronics industries in the growing world market, the impact of technological improvements (both in satellite systems and in ground-based networks), and the technological and commercial advantages of integrated space-terrestrial networks. The needs for a European definition of the precise national and international roles of satellite communications, for maximum speed in implementing such decisions (before the technology becomes obsolete), and for increased cooperation and standardization to assure European equipment manufacturers a reasonable share of the market are stressed.

Scaling up family medicine training in Gezira, Sudan - a 2-year in-service master programme using modern information and communication technology: a survey study.

PubMed

Mohamed, Khalid G; Hunskaar, Steinar; Abdelrahman, Samira Hamid; Malik, Elfatih M

2014-01-21

In 2010 the Gezira Family Medicine Project (GFMP) was initiated in Gezira state, Sudan, designed as an in-service training model. The project is a collaboration project between the University of Gezira, which aims to provide a 2-year master's programme in family medicine for practicing doctors, and the Ministry of Health, which facilitates service provision and funds the training programme. This paper presents the programme, the teaching environment, and the first batch of candidates enrolled. In this study a self-administered questionnaire was used to collect baseline data at the start of the project from doctors who joined the programme. A checklist was also used to assess the health centres where they work. A total of 188 out of 207 doctors responded (91%), while data were gathered from all 158 health centres (100%) staffed by the programme candidates. The Gezira model of in-service family medicine training has succeeded in recruiting 207 candidates in its first batch, providing health services in 158 centres, of which 84 had never been served by a doctor before. The curriculum is community oriented. The mean age of doctors was 32.5 years, 57% were males, and 32% were graduates from the University of Gezira. Respondents stated high confidence in practicing some skills such as asthma management and post-abortion uterine evacuation. They were least confident in other skills such as managing depression or inserting an intrauterine device. The majority of health centres was poorly equipped for management of noncommunicable diseases, as only 10% had an electrocardiography machine (ECG), 5% had spirometer, and 1% had a defibrillator. The Gezira model has responded to local health system needs. Use of modern information and communication technology is used to facilitate both health service provision and training. The GFMP represents an example of a large-volume scaling-up programme of family medicine in Africa.

Scaling up family medicine training in Gezira, Sudan – a 2-year in-service master programme using modern information and communication technology: a survey study

PubMed Central

2014-01-01

Background In 2010 the Gezira Family Medicine Project (GFMP) was initiated in Gezira state, Sudan, designed as an in-service training model. The project is a collaboration project between the University of Gezira, which aims to provide a 2-year master’s programme in family medicine for practicing doctors, and the Ministry of Health, which facilitates service provision and funds the training programme. This paper presents the programme, the teaching environment, and the first batch of candidates enrolled. Methods In this study a self-administered questionnaire was used to collect baseline data at the start of the project from doctors who joined the programme. A checklist was also used to assess the health centres where they work. A total of 188 out of 207 doctors responded (91%), while data were gathered from all 158 health centres (100%) staffed by the programme candidates. Results The Gezira model of in-service family medicine training has succeeded in recruiting 207 candidates in its first batch, providing health services in 158 centres, of which 84 had never been served by a doctor before. The curriculum is community oriented. The mean age of doctors was 32.5 years, 57% were males, and 32% were graduates from the University of Gezira. Respondents stated high confidence in practicing some skills such as asthma management and post-abortion uterine evacuation. They were least confident in other skills such as managing depression or inserting an intrauterine device. The majority of health centres was poorly equipped for management of noncommunicable diseases, as only 10% had an electrocardiography machine (ECG), 5% had spirometer, and 1% had a defibrillator. Conclusions The Gezira model has responded to local health system needs. Use of modern information and communication technology is used to facilitate both health service provision and training. The GFMP represents an example of a large-volume scaling-up programme of family medicine in Africa. PMID:24443978

Math Machines: Using Actuators in Physics Classes

NASA Astrophysics Data System (ADS)

Thomas, Frederick J.; Chaney, Robert A.; Gruesbeck, Marta

2018-01-01

Probeware (sensors combined with data-analysis software) is a well-established part of physics education. In engineering and technology, sensors are frequently paired with actuators—motors, heaters, buzzers, valves, color displays, medical dosing systems, and other devices that are activated by electrical signals to produce intentional physical change. This article describes how a 20-year project aimed at better integration of the STEM disciplines (science, technology, engineering and mathematics) uses brief actuator activities in physics instruction. Math Machines "actionware" includes software and hardware that convert virtually any free-form, time-dependent algebraic function into the dynamic actions of a stepper motor, servo motor, or RGB (red, green, blue) color mixer. With wheels and a platform, the stepper motor becomes LACI, a programmable vehicle. Adding a low-power laser module turns the servo motor into a programmable Pointer. Adding a gear and platform can transform the Pointer into an earthquake simulator.

Logic Design Pathology and Space Flight Electronics

NASA Technical Reports Server (NTRS)

Katz, Richard; Barto, Rod L.; Erickson, K.

1997-01-01

Logic design errors have been observed in space flight missions and the final stages of ground test. The technologies used by designers and their design/analysis methodologies will be analyzed. This will give insight to the root causes of the failures. These technologies include discrete integrated circuit based systems, systems based on field and mask programmable logic, and the use computer aided engineering (CAE) systems. State-of-the-art (SOTA) design tools and methodologies will be analyzed with respect to high-reliability spacecraft design and potential pitfalls are discussed. Case studies of faults from large expensive programs to "smaller, faster, cheaper" missions will be used to explore the fundamental reasons for logic design problems.

The impact of the National Institute for Health Research Health Technology Assessment programme, 2003-13: a multimethod evaluation.

PubMed

Guthrie, Susan; Bienkowska-Gibbs, Teresa; Manville, Catriona; Pollitt, Alexandra; Kirtley, Anne; Wooding, Steven

2015-08-01

The National Institute for Health Research (NIHR) Health Technology Assessment (HTA) programme supports research tailored to the needs of NHS decision-makers, patients and clinicians. This study reviewed the impact of the programme, from 2003 to 2013, on health, clinical practice, health policy, the economy and academia. It also considered how HTA could maintain and increase its impact. Interviews (n = 20): senior stakeholders from academia, policy-making organisations and the HTA programme. Bibliometric analysis: citation analysis of publications arising from HTA programme-funded research. Researchfish survey: electronic survey of all HTA grant holders. Payback case studies (n = 12): in-depth case studies of HTA programme-funded research. We make the following observations about the impact, and routes to impact, of the HTA programme: it has had an impact on patients, primarily through changes in guidelines, but also directly (e.g. changing clinical practice); it has had an impact on UK health policy, through providing high-quality scientific evidence - its close relationships with the National Institute for Health and Care Excellence (NICE) and the National Screening Committee (NSC) contributed to the observed impact on health policy, although in some instances other organisations may better facilitate impact; HTA research is used outside the UK by other HTA organisations and systematic reviewers - the programme has an impact on HTA practice internationally as a leader in HTA research methods and the funding of HTA research; the work of the programme is of high academic quality - the Health Technology Assessment journal ensures that the vast majority of HTA programme-funded research is published in full, while the HTA programme still encourages publication in other peer-reviewed journals; academics agree that the programme has played an important role in building and retaining HTA research capacity in the UK; the HTA programme has played a role in increasing the focus on effectiveness and cost-effectiveness in medicine - it has also contributed to increasingly positive attitudes towards HTA research both within the research community and the NHS; and the HTA focuses resources on research that is of value to patients and the UK NHS, which would not otherwise be funded (e.g. where there is no commercial incentive to undertake research). The programme should consider the following to maintain and increase its impact: providing targeted support for dissemination, focusing resources when important results are unlikely to be implemented by other stakeholders, particularly when findings challenge vested interests; maintaining close relationships with NICE and the NSC, but also considering other potential users of HTA research; maintaining flexibility and good relationships with researchers, giving particular consideration to the Technology Assessment Report (TAR) programme and the potential for learning between TAR centres; maintaining the academic quality of the work and the focus on NHS need; considering funding research on the short-term costs of the implementation of new health technologies; improving the monitoring and evaluation of whether or not patient and public involvement influences research; improve the transparency of the priority-setting process; and continuing to monitor the impact and value of the programme to inform its future scientific and administrative development.

Urology training in the developing world: The trainees’ perspective in Kurdistan, Iraq

PubMed Central

Friad, Goran; Sabah, Kawa; Ameen, Ismaeel Hama

2013-01-01

Objective To analyse the advanced systems of urology residency in the developed world, to compare them to a system in the developing world, and thereby identify the shortcomings and make recommendations to improve residency programmes for urology in the Kurdistan Region of Iraq. Methods A survey was conducted amongst the urology Residents (55) in the three governorates of the Kurdistan Region of Iraq, to assess the accessibility of the training programme, the types of the residency programmes, skills acquisition, the use of modern technology for teaching and assessment, the environment of the settings of practice, and the status of research in their training. Results An overwhelming majority (88%) of trainees reported difficulty in securing a training position. A high proportion (43%) felt disappointed at the beginning of their training. There is no unified curriculum of training, and more than two-thirds of the respondents reported a lack of a proper evidence-based medical education. There is no formal subspecialty training programme. Of the respondents, 65% referred to the difficulties in the environment for training, and that there was a low level of research involvement (12%). Conclusions Urology training is not easily accessible, there is no unified programme of residency, there are limited facilities, and a minimal assessment of practical skills. The environment for practice needs enormous improvements and a strong foundation for research should be created. PMID:26019913

Urology training in the developing world: The trainees' perspective in Kurdistan, Iraq.

PubMed

Friad, Goran; Sabah, Kawa; Ameen, Ismaeel Hama

2014-03-01

To analyse the advanced systems of urology residency in the developed world, to compare them to a system in the developing world, and thereby identify the shortcomings and make recommendations to improve residency programmes for urology in the Kurdistan Region of Iraq. A survey was conducted amongst the urology Residents (55) in the three governorates of the Kurdistan Region of Iraq, to assess the accessibility of the training programme, the types of the residency programmes, skills acquisition, the use of modern technology for teaching and assessment, the environment of the settings of practice, and the status of research in their training. An overwhelming majority (88%) of trainees reported difficulty in securing a training position. A high proportion (43%) felt disappointed at the beginning of their training. There is no unified curriculum of training, and more than two-thirds of the respondents reported a lack of a proper evidence-based medical education. There is no formal subspecialty training programme. Of the respondents, 65% referred to the difficulties in the environment for training, and that there was a low level of research involvement (12%). Urology training is not easily accessible, there is no unified programme of residency, there are limited facilities, and a minimal assessment of practical skills. The environment for practice needs enormous improvements and a strong foundation for research should be created.

Promoting Assessment Efficacy through an Integrated System for Online Clinical Assessment of Practical Skills

ERIC Educational Resources Information Center

Hay, Peter J.; Engstrom, Craig; Green, Anita; Friis, Peter; Dickens, Sue; Macdonald, Doune

2013-01-01

This paper presents evaluation outcomes from an externally funded research project involving the online clinical assessment of practical skills (eCAPS) using web-based video technologies within a university medical programme. eCAPS was implemented to trial this web-based approach for promoting the efficacy of "practical" skills…

Syrians' Acceptance of Digital Lectures: A Case Study

ERIC Educational Resources Information Center

Ramadan, Reem

2016-01-01

Technology-based learning modules are mostly challenged by their acceptance. A single-case study and mixed research method are used to explore a unique situation of applying digital lectures at the postgraduate Programmes at the Faculty of Tourism at Damascus University as a solution for brain drain in the Syrian higher education system. Results…

Loop-the-Loop: Bringing Theory into Practice

ERIC Educational Resources Information Center

Suwonjandee, N.; Asavapibhop, B.

2012-01-01

During the Thai high-school physics teacher training programme, we used an aluminum loop-the-loop system built by the Institute for the Promotion of Teaching Science and Technology (IPST) to demonstrate a circular motion and investigate the concept of the conservation of mechanical energy. There were 27 high-school teachers from three provinces,…

High Contrast Programmable Field Masks for JWST NIRSpec

NASA Technical Reports Server (NTRS)

Kutyrev, Alexander S.

2008-01-01

Microshutter arrays are one of the novel technologies developed for the James Webb Space Telescope (JWST). It will allow Near Infrared Spectrometer (NIRSpec) to acquire spectra of hundreds of objects simultaneously therefore increasing its efficiency tremendously. We have developed these programmable arrays that are based on Micro-Electro Mechanical Structures (MEMS) technology. The arrays are 2D addressable masks that can operate in cryogenic environment of JWST. Since the primary JWST science requires acquisition of spectra of extremely faint objects, it is important to provide very high contrast of the open to closed shutters. This high contrast is necessary to eliminate any possible contamination and confusion in the acquired spectra by unwanted objects. We have developed and built a test system for the microshutter array functional and optical characterization. This system is capable of measuring the contrast of the microshutter array both in visible and infrared light of the NIRSpec wavelength range while the arrays are in their working cryogenic environment. We have measured contrast ratio of several microshutter arrays and demonstrated that they satisfy and in many cases far exceed the NIRSpec contrast requirement value of 2000.

Quality evaluation in the management of child sponsorship programmes.

PubMed

McDonnell, W A; McDonnell, T P

1994-08-01

Programme evaluation tactics for child sponsorship programmes have historically concentrated on quantitative analysis of service units, amount of money invested, number of countries served, the number of projects, and number of children in each project. While these are valuable measures of programme variables, they do not assess the impact of programmes on the lives of the children sponsored. Outcome measures designed to assess programme impact add greatly to the information available to child welfare professionals. This study collected data about the impact of the programme on the lives of the children. The Child Welfare League's Child Well-Being Scales (CWBS) were used to assess programme impact. Twelve scales were chosen as directly related in type to the programmes administered by Children International, a traditional and well established child sponsorship organization located in Kansas City, Missouri. A thirteenth scale was suggested by field workers in India as particularly relevant to Third World populations. The scales were translated into languages appropriate to each population in the programme countries. Social workers in each country were trained to administer and score them. This analysis used the emerging data technology becoming available to programmes in Third World countries. The system enables administrators in the Third World to evaluate, enhance and summarize their programmes in a way understandable across borders. Epi Info (Dean et al., 1990) was customized to provide the framework for the analysis. The population for this study was selected by a 5% random sampling of children currently enrolled as sponsored children (180,000+ worldwide). These were compared with a waiting-list control group selected randomly from lists of children who have applied for sponsorship but have not yet been receiving services (n = 50 from each project).(ABSTRACT TRUNCATED AT 250 WORDS)

Theoretical and practical considerations for the development of online international collaborative learning for dental hygiene students.

PubMed

Gussy, M G; Knevel, R J M; Sigurdson, V; Karlberg, G

2006-08-01

Globalization and concurrent development in computer and communication technology has increased interest in collaborative online teaching and learning for students in higher education institutions. Many institutions and teachers have introduced computer-supported programmes in areas including dental hygiene. The potential for the use of this technology is exciting; however, its introduction should be careful and considered. We suggest that educators wanting to introduce computer-supported programmes make explicit their pedagogical principles and then select technologies that support and exploit these principles. This paper describes this process as it was applied to the development of an international web-based collaborative learning programme for dental hygiene students.

Future Launch Vehicle Structures - Expendable and Reusable Elements

NASA Astrophysics Data System (ADS)

Obersteiner, M. H.; Borriello, G.

2002-01-01

Further evolution of existing expendable launch vehicles will be an obvious element influencing the future of space transportation. Besides this reusability might be the change with highest potential for essential improvement. The expected cost reduction and finally contributing to this, the improvement of reliability including safe mission abort capability are driving this idea. Although there are ideas of semi-reusable launch vehicles, typically two stages vehicles - reusable first stage or booster(s) and expendable second or upper stage - it should be kept in mind that the benefit of reusability will only overwhelm if there is a big enough share influencing the cost calculation. Today there is the understanding that additional technology preparation and verification will be necessary to master reusability and get enough benefits compared with existing launch vehicles. This understanding is based on several technology and system concepts preparation and verification programmes mainly done in the US but partially also in Europe and Japan. The major areas of necessary further activities are: - System concepts including business plan considerations - Sub-system or component technologies refinement - System design and operation know-how and capabilities - Verification and demonstration oriented towards future mission mastering: One of the most important aspects for the creation of those coming programmes and activities will be the iterative process of requirements definition derived from concepts analyses including economical considerations and the results achieved and verified within technology and verification programmes. It is the intention of this paper to provide major trends for those requirements focused on future launch vehicles structures. This will include the aspects of requirements only valid for reusable launch vehicles and those common for expendable, semi-reusable and reusable launch vehicles. Structures and materials is and will be one of the important technology areas to be improved. This includes: - Primary structures - Thermal protection systems (for high and low temperatures) - Hot structures (leading edges, engine cowling, ...) - Tanks (for various propellants and fluids, cryo, ...) Requirements to be considered are including materials properties and a variety of loads definition - static and dynamic. Based on existing knowledge and experience for expendable LV (Ariane, ...) and aircraft there is the need to established a combined understanding to provide the basis for an efficient RLV design. Health monitoring will support the cost efficient operation of future reusable structures, but will also need a sound understanding of loads and failure mechanisms as basis. Risk mitigation will ask for several steps of demonstration towards a cost efficient RLV (structures) operation. Typically this has or will start with basic technology, to be evolved to components demonstration (TPS, tanks, ...) and finally to result in the demonstration of the cost efficient reuse operation. This paper will also include a programmatic logic concerning future LV structures demonstration.

Smart Actuators and Adhesives for Reconfigurable Matter.

PubMed

Ko, Hyunhyub; Javey, Ali

2017-04-18

Biological systems found in nature provide excellent stimuli-responsive functions. The camouflage adaptation of cephalopods (octopus, cuttlefish), rapid stiffness change of sea cucumbers, opening of pine cones in response to humidity, and rapid closure of Venus flytraps upon insect touch are some examples of nature's smart systems. Although current technologies are still premature to mimic these sophisticated structures and functions in smart biological systems, recent work on stimuli-responsive programmable matter has shown great progress. Stimuli-responsive materials based on hydrogels, responsive nanocomposites, hybrid structures, shape memory polymers, and liquid crystal elastomers have demonstrated excellent responsivities to various stimuli such as temperature, light, pH, and electric field. However, the technologies in these stimuli-responsive materials are still not sophisticated enough to demonstrate the ultimate attributes of an ideal programmable matter: fast and reversible reconfiguration of programmable matter into complex and robust shapes. Recently, reconfigurable (or programmable) matter that reversibly changes its structure/shape or physical/chemical properties in response to external stimuli has attracted great interest for applications in sensors, actuators, robotics, and smart systems. In particular, key attributes of programmable matter including fast and reversible reconfiguration into complex and robust 2D and 3D shapes have been demonstrated by various approaches. In this Account, we review focused areas of smart materials with special emphasis on the material and device structure designs to enhance the response time, reversibility, multistimuli responsiveness, and smart adhesion for efficient shape transformation and functional actuations. First, the capability of fast reconfiguration of 2D and 3D structures in a reversible way is a critical requirement for programmable matter. For the fast and reversible reconfiguration, various approaches based on enhanced solvent diffusion rate through the porous or structured hydrogel materials, electrostatic repulsion between cofacial electrolyte nanosheets, and photothermal actuation are discussed. Second, the ability to reconfigure programmable matters into a variety of complex structures is beneficial for the use of reconfigurable matter in diverse applications. For the reconfiguration of planar 2D structures into complex 3D structures, asymmetric and multidirectional stress should be applied. In this regard, local hinges with stimuli-responsive stiffness, multilayer laminations with different responsiveness in individual layers, and origami and kirigami assembly approaches are reviewed. Third, multistimuli responsiveness will be required for the efficient reconfiguration of complex programmable matter in response to user-defined stimulus under different chemical and physical environments. In addition, with multistimuli responsiveness, the reconfigured shape can be temporarily affixed by one signal and disassembled by another signal at a user-defined location and time. Photoactuation depending on the chirality of carbon nanotubes and composite gels with different responsiveness will be discussed. Finally, the development of smart adhesives with on-demand adhesion strength is critically required to maintain the robust reconfigurable shapes and for the switching on/off of the binding between components or with target objects. Among various connectors and adhesives, thermoresponsive nanowire connectors, octopus-inspired smart adhesives, and elastomeric tiles with soft joints are described due to their potential applications in joints of deformable 3D structures and smart gripping systems.

High Resolution Mass Spectrometry for future space instrumentation : current development within the French Space Orbitrap Consortium

NASA Astrophysics Data System (ADS)

Briois, Christelle; Lebreton, Jean-Pierre; Szopa, Cyril; Thirkell, Laurent; Aradj, Kenzi; Bouabdellah, Abdel; Boukrara, Amirouche; Carrasco, Nathalie; Chalumeau, Gilles; Chapelon, Olivier; Colin, Fabrice; Cottin, Hervé; Engrand, Cécile; Grand, Noel; Kukui, Alexandre; Pennanech, Cyril; Thissen, Roland; Vuitton, Véronique; Zapf, Pascal; Makarov, Alexander

2014-05-01

Mass spectrometry has been used for years in space exploration to characterise the chemical composition of solar system bodies and their environment. Because of the harsh constraints imposed to the space probe instruments, their mass resolution is quite limited compared to laboratory instruments, sometimes leading to significant limitations in the treatment of the data collected with this type of instrumentation. Future in situ solar system exploration missions would significantly benefit from High Resolution Mass Spectrometry (HRMS). For a few years, 5 French laboratories (LPC2E, IPAG, LATMOS, LISA, CSNSM) involved in the chemical investigation of solar system bodies formed a Consortium to develop HRMS for future space exploration, based on the use of the Orbitrap technology (C. Briois et al., 2014, to be submitted). This development is carried out in the frame of a Research and Technology (R&T) development programme partly funded by the French Space Agency (CNES). The work is undertaken in close collaboration with the Thermo Fisher Scientific Company, which commercialises Orbitrap-based laboratory instruments. The R&T activities are currently concentrating on the core elements of the Orbitrap analyser that are required to reach a sufficient maturity level for allowing design studies of future space instruments. We are indeed pursuing, within international collaborations, the definition of several instrument concepts based on the core elements that are subject of our R&T programme. In this talk, we briefly discuss science applications for future orbitrap-based HRMS space instruments. We highlight present results of our R&T programme.

A tool box for operational mosquito larval control: preliminary results and early lessons from the Urban Malaria Control Programme in Dar es Salaam, Tanzania

PubMed Central

Fillinger, Ulrike; Kannady, Khadija; William, George; Vanek, Michael J; Dongus, Stefan; Nyika, Dickson; Geissbühler, Yvonne; Chaki, Prosper P; Govella, Nico J; Mathenge, Evan M; Singer, Burton H; Mshinda, Hassan; Lindsay, Steven W; Tanner, Marcel; Mtasiwa, Deo; de Castro, Marcia C; Killeen, Gerry F

2008-01-01

Background As the population of Africa rapidly urbanizes, large populations could be protected from malaria by controlling aquatic stages of mosquitoes if cost-effective and scalable implementation systems can be designed. Methods A recently initiated Urban Malaria Control Programme in Dar es Salaam delegates responsibility for routine mosquito control and surveillance to modestly-paid community members, known as Community-Owned Resource Persons (CORPs). New vector surveillance, larviciding and management systems were designed and evaluated in 15 city wards to allow timely collection, interpretation and reaction to entomologic monitoring data using practical procedures that rely on minimal technology. After one year of baseline data collection, operational larviciding with Bacillus thuringiensis var. israelensis commenced in March 2006 in three selected wards. Results The procedures and staff management systems described greatly improved standards of larval surveillance relative to that reported at the outset of this programme. In the first year of the programme, over 65,000 potential Anopheles habitats were surveyed by 90 CORPs on a weekly basis. Reaction times to vector surveillance at observations were one day, week and month at ward, municipal and city levels, respectively. One year of community-based larviciding reduced transmission by the primary malaria vector, Anopheles gambiae s.l., by 31% (95% C.I. = 21.6–37.6%; p = 0.04). Conclusion This novel management, monitoring and evaluation system for implementing routine larviciding of malaria vectors in African cities has shown considerable potential for sustained, rapidly responsive, data-driven and affordable application. Nevertheless, the true programmatic value of larviciding in urban Africa can only be established through longer-term programmes which are stably financed and allow the operational teams and management infrastructures to mature by learning from experience. PMID:18218148

Time to publication for NIHR HTA programme-funded research: a cohort study

PubMed Central

Chinnery, Fay; Young, Amanda; Goodman, Jennie; Ashton-Key, Martin; Milne, Ruairidh

2013-01-01

Objective To assess the time to publication of primary research and evidence syntheses funded by the National Institute for Health Research (NIHR) Health Technology Assessment (HTA) Programme published as a monograph in Health Technology Assessment and as a journal article in the wider biomedical literature. Study design Retrospective cohort study. Setting Primary research and evidence synthesis projects funded by the HTA Programme were included in the cohort if they were registered in the NIHR research programmes database and was planned to submit the draft final report for publication in Health Technology Assessment on or before 9 December 2011. Main outcome measures The median time to publication and publication at 30 months in Health Technology Assessment and in an external journal were determined by searching the NIHR research programmes database and HTA Programme website. Results Of 458 included projects, 184 (40.2%) were primary research projects and 274 (59.8%) were evidence syntheses. A total of 155 primary research projects had a completion date; the median time to publication was 23 months (26.5 and 35.5 months to publish a monograph and to publish in an external journal, respectively) and 69% were published within 30 months. The median time to publication of HTA-funded trials (n=126) was 24 months and 67.5% were published within 30 months. Among the evidence syntheses with a protocol online date (n=223), the median time to publication was 25.5 months (28 months to publication as a monograph), but only 44.4% of evidence synthesis projects were published in an external journal. 65% of evidence synthesis studies had been published within 30.0 months. Conclusions Research funded by the HTA Programme publishes promptly. The importance of Health Technology Assessment was highlighted as the median time to publication was 9 months shorter for a monograph than an external journal article. PMID:24285634

Electronic Mentoring as an Example for the Use of Information and Communications Technology in Engineering Education

ERIC Educational Resources Information Center

Mueller, Sigrid

2004-01-01

Electronic mentoring programmes at colleges and universities and especially in engineering and science are a relatively new phenomenon. Electronic mentoring has been developed based on the possibilities unique to information and communications technology. The common feature of electronic mentoring programmes is the independence from geography and…

Supporting Pre-Service Teachers' Technology-Enabled Learning Design Thinking through Whole of Programme Transformation

ERIC Educational Resources Information Center

Bower, Matt; Highfield, Kate; Furney, Pam; Mowbray, Lee

2013-01-01

This paper explains a development and evaluation project aimed at transforming two pre-service teacher education programmes at Macquarie University to more effectively cultivate students' technology-enabled learning design thinking. The process of transformation was based upon an explicit and sustained focus on developing university academics'…

A Model for Discussing the Quality of Technology-Enhanced Learning in Blended Learning Programmes

ERIC Educational Resources Information Center

Casanova, Diogo; Moreira, António

2017-01-01

This paper presents a comprehensive model for supporting informed and critical discussions concerning the quality of Technology-Enhanced Learning in Blended Learning programmes. The model aims to support discussions around domains such as how institutions are prepared, the participants' background and expectations, the course design, and the…

Perspectives for food research and European collaboration in the European Research Area and the new Framework Programme.

PubMed

Breslin, L

2001-08-01

Since 1987, successive framework programmes have contributed to strengthen European food research through the establishment of networks between research institutions, universities and companies from various European countries. In the FAIR programme (1994-1998), 118 research projects comprising nearly 1,000 participants from the European Union and Associated States have been supported in the food area with a European funding of about [symbol: see text] 108 million. Within the Quality of Life and Management of Living Resources programme (1998-2002), food research is mostly supported within the key action 'food, nutrition and health' with a budget of [symbol: see text] 290 million. After the first four deadlines, 735 eligible research proposals have already been received. Further to their evaluation by a panel of independent experts, 108 proposals have been funded or selected for funding representing a total contribution of about [symbol: see text] 168 million. Among those, several clusters of projects are now running on important topics such as probiotics, coeliac diseases, mycotoxins, GMO, safety and food for the elderly. In addition, technology stimulation measures are largely benefiting SMEs to foster their innovation potential. In January 2000, the European Commission adopted a Communication entitled "Towards the European Research Area (ERA)" with the objective to contribute to developing better framework conditions for research in Europe. On 21 February 2001, the Commission adopted proposals to be submitted to the European Parliament and Council for the next framework programme for research and innovation (2002-2006). The new framework programme that is becoming one of the financial instruments of the ERA aims at catalysing the integration of European research by: strengthening of links between the Community research effort and national and regional research policies; concentrating on a limited number of priority fields or research to which activities at the Union level can add real value. One of the seven priority areas, entitled 'food safety and health risks', is intended to help establish the integrated scientific and technological bases needed to develop a system of production and distribution of safe and healthy food and control food-related risks, relying in particular on biotechnology tools, as well as health risks associated with environmental changes. A total budget of [symbol: see text] 600 million is proposed for this priority. In the priority areas, the new framework programme will work mainly by supporting the development of cooperation within networks of excellence bringing together the best research capabilities in Europe's regions to conduct common research programmes and integrated projects involving public and private partners, with clearly stated scientific and technological objectives.

Software life cycle methodologies and environments

NASA Technical Reports Server (NTRS)

Fridge, Ernest

1991-01-01

Products of this project will significantly improve the quality and productivity of Space Station Freedom Program software processes by: improving software reliability and safety; and broadening the range of problems that can be solved with computational solutions. Projects brings in Computer Aided Software Engineering (CASE) technology for: Environments such as Engineering Script Language/Parts Composition System (ESL/PCS) application generator, Intelligent User Interface for cost avoidance in setting up operational computer runs, Framework programmable platform for defining process and software development work flow control, Process for bringing CASE technology into an organization's culture, and CLIPS/CLIPS Ada language for developing expert systems; and methodologies such as Method for developing fault tolerant, distributed systems and a method for developing systems for common sense reasoning and for solving expert systems problems when only approximate truths are known.

Clustered Regularly Interspaced Short Palindromic Repeats/Cas9 Genetic Engineering: Robotic Genetic Surgery.

PubMed

Deshpande, Kaivalya; Vyas, Arpita; Balakrishnan, Archana; Vyas, Dinesh

2015-12-01

As a novel technology that utilizes the endogenous immune defense system in bacteria, CRISPR/Cas9 has transcended DNA engineering into a more pragmatic and clinically efficacious field. Using programmable sgRNA sequences and nucleases, the system effectively introduces double strand breaks in target genes within an entire organism. The applications of CRISPR range from biomedicine to drug development and epigenetic modification. Studies have demonstrated CRISPR mediated targeting of various tumorigenic genes and effector proteins known to be involved in colon carcinomas. This technology significantly expands the scope of gene manipulation and allows for an enhanced modeling of colon cancers, as well as various other malignancies.

Healthcare Information Systems - Requirements and Vision

NASA Astrophysics Data System (ADS)

Williams, John G.

The introduction of sophisticated information, communications and technology into health care is not a simple task, as demonstrated by the difficulties encountered by the Department of Health's multi-billion programme for the NHS. This programme has successfully implemented much of the infrastructure needed to support the activities of the NHS, but has made less progress with electronic patient records. The case for health records that are focused on the individual patient will be outlined, and the need for these to be underpinned by professionally agreed standards for structure and content. Some of the challenges will be discussed, and the benefits to health care and clinical research will be explored.

Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 1: Concepts and activity descriptions

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paul S.; Crump, John W.; Ackley, Keith A.

1992-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at effectively combining tool and data integration mechanisms with a model of the software development process to provide an intelligent integrated software development environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The Advanced Software Development Workstation (ASDW) program is conducting research into development of advanced technologies for Computer Aided Software Engineering (CASE).

High-Performance, Radiation-Hardened Electronics for Space Environments

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Watson, Michael D.; Frazier, Donald O.; Adams, James H.; Johnson, Michael A.; Kolawa, Elizabeth A.

2007-01-01

The Radiation Hardened Electronics for Space Environments (RHESE) project endeavors to advance the current state-of-the-art in high-performance, radiation-hardened electronics and processors, ensuring successful performance of space systems required to operate within extreme radiation and temperature environments. Because RHESE is a project within the Exploration Technology Development Program (ETDP), RHESE's primary customers will be the human and robotic missions being developed by NASA's Exploration Systems Mission Directorate (ESMD) in partial fulfillment of the Vision for Space Exploration. Benefits are also anticipated for NASA's science missions to planetary and deep-space destinations. As a technology development effort, RHESE provides a broad-scoped, full spectrum of approaches to environmentally harden space electronics, including new materials, advanced design processes, reconfigurable hardware techniques, and software modeling of the radiation environment. The RHESE sub-project tasks are: SelfReconfigurable Electronics for Extreme Environments, Radiation Effects Predictive Modeling, Radiation Hardened Memory, Single Event Effects (SEE) Immune Reconfigurable Field Programmable Gate Array (FPGA) (SIRF), Radiation Hardening by Software, Radiation Hardened High Performance Processors (HPP), Reconfigurable Computing, Low Temperature Tolerant MEMS by Design, and Silicon-Germanium (SiGe) Integrated Electronics for Extreme Environments. These nine sub-project tasks are managed by technical leads as located across five different NASA field centers, including Ames Research Center, Goddard Space Flight Center, the Jet Propulsion Laboratory, Langley Research Center, and Marshall Space Flight Center. The overall RHESE integrated project management responsibility resides with NASA's Marshall Space Flight Center (MSFC). Initial technology development emphasis within RHESE focuses on the hardening of Field Programmable Gate Arrays (FPGA)s and Field Programmable Analog Arrays (FPAA)s for use in reconfigurable architectures. As these component/chip level technologies mature, the RHESE project emphasis shifts to focus on efforts encompassing total processor hardening techniques and board-level electronic reconfiguration techniques featuring spare and interface modularity. This phased approach to distributing emphasis between technology developments provides hardened FPGA/FPAAs for early mission infusion, then migrates to hardened, board-level, high speed processors with associated memory elements and high density storage for the longer duration missions encountered for Lunar Outpost and Mars Exploration occurring later in the Constellation schedule.

DNA nanotechnology from the test tube to the cell.

PubMed

Chen, Yuan-Jyue; Groves, Benjamin; Muscat, Richard A; Seelig, Georg

2015-09-01

The programmability of Watson-Crick base pairing, combined with a decrease in the cost of synthesis, has made DNA a widely used material for the assembly of molecular structures and dynamic molecular devices. Working in cell-free settings, researchers in DNA nanotechnology have been able to scale up system complexity and quantitatively characterize reaction mechanisms to an extent that is infeasible for engineered gene circuits or other cell-based technologies. However, the most intriguing applications of DNA nanotechnology - applications that best take advantage of the small size, biocompatibility and programmability of DNA-based systems - lie at the interface with biology. Here, we review recent progress in the transition of DNA nanotechnology from the test tube to the cell. We highlight key successes in the development of DNA-based imaging probes, prototypes of smart therapeutics and drug delivery systems, and explore the future challenges and opportunities for cellular DNA nanotechnology.

The management of cardiovascular disease in the Netherlands: analysis of different programmes

PubMed Central

Cramm, Jane M.; Tsiachristas, Apostolos; Walters, Bethany H.; Adams, Samantha A.; Bal, Roland; Huijsman, Robbert; Rutten-Van Mölken, Maureen P.M.H.; Nieboer, Anna P.

2013-01-01

Background Disease management programmes are increasingly used to improve the efficacy and effectiveness of chronic care delivery. But, disease management programme development and implementation is a complex undertaking that requires effective decision-making. Choices made in the earliest phases of programme development are crucial, as they ultimately impact costs, outcomes and sustainability. Methods To increase our understanding of the choices that primary healthcare practices face when implementing such programmes and to stimulate successful implementation and sustainability, we compared the early implementation of eight cardiovascular disease management programmes initiated and managed by healthcare practices in various regions of the Netherlands. Using a mixed-methods design, we identified differences in and challenges to programme implementation in terms of context, patient characteristics, disease management level, healthcare utilisation costs, development costs and health-related quality of life. Results Shifting to a multidisciplinary, patient-centred care pathway approach to disease management is demanding for organisations, professionals and patients, and is especially vulnerable when sustainable change is the goal. Funding is an important barrier to sustainable implementation of cardiovascular disease management programmes, although development costs of the individual programmes varied considerably in relation to the length of the development period. The large number of professionals involved in combination with duration of programme development was the largest cost drivers. While Information and Communication Technology systems to support the new care pathways did not directly contribute to higher costs, delays in implementation indirectly did. Conclusions Developing and implementing cardiovascular disease management programmes is time-consuming and challenging. Multidisciplinary, patient-centred care demands multifaceted changes in routine care. As care pathways become more complex, they also become more expensive. Better preparedness and training can prevent unnecessary delays during the implementation period and are crucial to reducing costs. PMID:24167456

The management of cardiovascular disease in the Netherlands: analysis of different programmes.

PubMed

Cramm, Jane M; Tsiachristas, Apostolos; Walters, Bethany H; Adams, Samantha A; Bal, Roland; Huijsman, Robbert; Rutten-Van Mölken, Maureen P M H; Nieboer, Anna P

2013-01-01

Disease management programmes are increasingly used to improve the efficacy and effectiveness of chronic care delivery. But, disease management programme development and implementation is a complex undertaking that requires effective decision-making. Choices made in the earliest phases of programme development are crucial, as they ultimately impact costs, outcomes and sustainability. To increase our understanding of the choices that primary healthcare practices face when implementing such programmes and to stimulate successful implementation and sustainability, we compared the early implementation of eight cardiovascular disease management programmes initiated and managed by healthcare practices in various regions of the Netherlands. Using a mixed-methods design, we identified differences in and challenges to programme implementation in terms of context, patient characteristics, disease management level, healthcare utilisation costs, development costs and health-related quality of life. Shifting to a multidisciplinary, patient-centred care pathway approach to disease management is demanding for organisations, professionals and patients, and is especially vulnerable when sustainable change is the goal. Funding is an important barrier to sustainable implementation of cardiovascular disease management programmes, although development costs of the individual programmes varied considerably in relation to the length of the development period. The large number of professionals involved in combination with duration of programme development was the largest cost drivers. While Information and Communication Technology systems to support the new care pathways did not directly contribute to higher costs, delays in implementation indirectly did. Developing and implementing cardiovascular disease management programmes is time-consuming and challenging. Multidisciplinary, patient-centred care demands multifaceted changes in routine care. As care pathways become more complex, they also become more expensive. Better preparedness and training can prevent unnecessary delays during the implementation period and are crucial to reducing costs.

The Athena optics

NASA Astrophysics Data System (ADS)

Bavdaz, Marcos; Wille, Eric; Shortt, Brian; Fransen, Sebastiaan; Collon, Maximilien; Vacanti, Giuseppe; Günther, Ramses; Yanson, Alexei; Vervest, Mark; Haneveld, Jeroen; van Baren, Coen; Zuknik, Karl-Heinz; Christensen, Finn; Krumrey, Michael; Burwitz, Vadim; Pareschi, Giovanni; Valsecchi, Giuseppe

2015-09-01

The Advanced Telescope for High ENergy Astrophysics (Athena) was selected in 2014 as the second large class mission (L2) of the ESA Cosmic Vision Science Programme within the Directorate of Science and Robotic Exploration. The mission development is proceeding via the implementation of the system studies and in parallel a comprehensive series of technology preparation activities. [1-3]. The core enabling technology for the high performance mirror is the Silicon Pore Optics (SPO), a modular X-ray optics technology, which utilises processes and equipment developed for the semiconductor industry [4-31]. This paper provides an overview of the programmatic background, the status of SPO technology and give an outline of the development roadmap and activities undertaken and planned by ESA.

Programmable Logic Controllers.

ERIC Educational Resources Information Center

Insolia, Gerard; Anderson, Kathleen

This document contains a 40-hour course in programmable logic controllers (PLC), developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The 10 units of the course cover the following: (1) introduction to programmable logic controllers; (2) DOS primer; (3) prerequisite…

Technology-Assisted Reading for Improving Reading Skills for Young South African Learners

ERIC Educational Resources Information Center

van Wyk, Gerda; Louw, Arno

2008-01-01

This paper addresses the controversial issues of improving the reading skills of young learners through technology-assisted reading programmes. On reporting the results of primary school learners from grade 2 to grade 7 who participated in a computer-based reading programme for seven months, we try to answer the critical questions of whether…

Professional Field in the Accreditation Process: Examining Information Technology Programmes at Dutch Universities of Applied Sciences

ERIC Educational Resources Information Center

Frederik, Hans; Hasanefendic, Sandra; van der Sijde, Peter

2017-01-01

In this paper, we analyse 53 Dutch accreditation reports in the field of information technology to assess the mechanisms of the reported involvement of the professional field in the undergraduate programmes of universities of applied sciences. The results of qualitative content analysis reveal a coupling effect in reporting on mechanisms of…

Learning Design for Multiple Modes of Provision: The Zambian Community School Teacher Development Programme

ERIC Educational Resources Information Center

Amory, Alan; Bialobrzeska, Maryla; Welch, Tessa

2018-01-01

The use of technology to support learning is becoming ubiquitous in Africa. However, technology is more often used to distribute information rather than as a tool to mediate learning. The work presented here on a programme for Zambian community school teachers (non-traditional students) illustrates how learning design allied to appropriate…

Assessment of Industrial Attachment: Issues and Concerns of Chinhoyi University of Technology's Undergraduate Degree Programme, Zimbabwe

ERIC Educational Resources Information Center

Chinyemba, Fredreck; Bvekerwa, Sailos T.

2012-01-01

This article presents findings from an action research that explored industrial attachment supervision and assessment issues and concerns of CUT's (Chinhoyi University of Technology) undergraduate degree programme. The study was motivated by the observation that there is no research project contacted in order to determine the social and economic…

Seven Years of Linking Scottish Schools and Industry with SSTN

ERIC Educational Resources Information Center

Whittington, Gary; Lowson, Sandra

2007-01-01

The Scottish Science and Technology Network (SSTN) is a major collaboration between Careers Scotland and Scottish industry to promote science and technology via an on-line and integrated learning programme. An initial two-year pilot project has grown considerably and has now been running for over 7 years. The SSTN programme is a web-based…

Example-Tracing Tutors: Intelligent Tutor Development for Non-Programmers

ERIC Educational Resources Information Center

Aleven, Vincent; McLaren, Bruce M.; Sewall, Jonathan; van Velsen, Martin; Popescu, Octav; Demi, Sandra; Ringenberg, Michael; Koedinger, Kenneth R.

2016-01-01

In 2009, we reported on a new Intelligent Tutoring Systems (ITS) technology, example-tracing tutors, that can be built without programming using the Cognitive Tutor Authoring Tools (CTAT). Creating example-tracing tutors was shown to be 4-8 times as cost-effective as estimates for ITS development from the literature. Since 2009, CTAT and its…

Multipurpose panel, phase 1, study report. [display utilizing multiplexing and digital techniques

NASA Technical Reports Server (NTRS)

Parkin, W.

1975-01-01

The feasibility of a multipurpose panel which provides a programmable electronic display for changeable panel nomenclature, multiplexes similar indicator display signals to the signal display, and demultiplexes command signals is examined. Topics discussed include: electronic display technology, miniaturized electronic and memory devices, and data management systems which employ digital address and multiplexing.

Moodle E-Learning System and Students' Performance in Higher Education: The Case of Public Administration Programmes

ERIC Educational Resources Information Center

Umek, Lan; Keržic, Damijana; Tomaževic, Nina; Aristovnik, Aleksander

2015-01-01

The use of information and communication technologies (ICT) and therefore e-learning is becoming an ever more frequently used teaching and learning technique at all levels of education. In higher education, it completely or partially substitutes the classical teaching methods. It provides richer resources than the traditional classroom and…

Progress in UNISIST Activity: The First Three Years of the UNISIST Programme in Australia, 1974-77. Network Study No. 8.

ERIC Educational Resources Information Center

National Library of Australia, Canberra.

This paper reprints the Australian report to UNISIST, the World Science Information System, whose objective is the development of national, regional, and international scientific, technological, industrial, and agricultural information policies, infrastructures, and services. It represents a full statement of the National Library's services and…

Strategies for the Creation, Design and Implementation of Effective Interactive Computer-Aided Learning Software in Numerate Business Subjects--The Byzantium Experience.

ERIC Educational Resources Information Center

Wilkinson-Riddle, G. J.; Patel, Ashok

1998-01-01

Discusses courseware development, including intelligent tutoring systems, under the Teaching and Learning Technology Programme and the Byzantium project that was designed to define computer-aided learning performance standards suitable for numerate business subjects; examine reasons to use computer-aided learning; and improve access to educational…

The Teaching of Creativity in Information Systems Programmes at South African Higher Education Institutions

ERIC Educational Resources Information Center

Turpin, Marita; Matthee, Machdel; Kruger, Anine

2015-01-01

The development of problem solving skills is a shared goal in science, engineering, mathematics and technology education. In the applied sciences, problems are often open-ended and complex, requiring a multidisciplinary approach as well as new designs. In such cases, problem solving requires not only analytical capabilities, but also creativity…

Designing and Integrating Reusable Learning Objects for Meaningful Learning: Cases from a Graduate Programme

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling

2017-01-01

E-learning quality depends on sound pedagogical integration between the content resources and lesson activities within an e-learning system. This study proposes that a meaningful learning with technology framework can be used to guide the design and integration of content resources with e-learning activities in ways that promote learning…

Yearbook of Educational and Instructional Technology 1969/70 Incorporating Programmes in Print.

ERIC Educational Resources Information Center

Cavanagh, Peter, Ed.; Jones, Clive, Ed.

The editors of this yearbook preface their directory section with a discussion of the systems approach to education. Over 2000 teaching programs--industrial and educational--are listed alphabetically by titles under the appropriate subject heading. All the programs listed were available in Great Britain at the time of the yearbook's publication.…

Sustainable Development and ICT in Slovenian Primary and Secondary Schools: Media-Ecological Perspective

ERIC Educational Resources Information Center

Zakrajšek, Srecko; Purg, Peter

2010-01-01

The goal of the research was to get an overview on the possibilities of sustainable development in relation to information and communication technologies in primary and secondary schools in Slovenia from the perspective of media ecology. The study analyses the reasons for a reorientation of the educational system and new programmes towards…

Sharing scientific discovery globally: toward a CERN virtual visit service

NASA Astrophysics Data System (ADS)

Goldfarb, S.; Hatzifotiadou, D.; Lapka, M.; Papanestis, A.

2017-10-01

The installation of virtual visit services by the LHC collaborations began shortly after the first high-energy collisions were provided by the CERN accelerator in 2010. The experiments: ATLAS [1], CMS [2], LHCb [3], and ALICE [4] have all joined in this popular and effective method to bring the excitement of scientific exploration and discovery into classrooms and other public venues around the world. Their programmes, which use a combination of video conference, webcast, and video recording to communicate with remote audiences have already reached tens of thousands of viewers, and the demand only continues to grow. Other venues, such as the CERN Control Centre, are also considering similar permanent installations. We present a summary of the development of the various systems in use around CERN today, including the technology deployed and a variety of use cases. We then lay down the arguments for the creation of a CERN-wide service that would support these programmes in a more coherent and effective manner. Potential services include a central booking system and operational management similar to what is currently provided for the common CERN video conference facilities. Certain choices in technology could be made to support programmes based on popular tools including (but not limited to) Skype™ [5], Google Hangouts [6], Facebook Live [7], and Periscope [8]. Successful implementation of the project, which relies on close partnership between the experiments, CERN IT CDA [9], and CERN IR ECO [10], has the potential to reach an even larger, global audience, more effectively than ever before.

Genome Engineering with TALE and CRISPR Systems in Neuroscience

PubMed Central

Lee, Han B.; Sundberg, Brynn N.; Sigafoos, Ashley N.; Clark, Karl J.

2016-01-01

Recent advancement in genome engineering technology is changing the landscape of biological research and providing neuroscientists with an opportunity to develop new methodologies to ask critical research questions. This advancement is highlighted by the increased use of programmable DNA-binding agents (PDBAs) such as transcription activator-like effector (TALE) and RNA-guided clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated (Cas) systems. These PDBAs fused or co-expressed with various effector domains allow precise modification of genomic sequences and gene expression levels. These technologies mirror and extend beyond classic gene targeting methods contributing to the development of novel tools for basic and clinical neuroscience. In this Review, we discuss the recent development in genome engineering and potential applications of this technology in the field of neuroscience. PMID:27092173

Genome Engineering with TALE and CRISPR Systems in Neuroscience.

PubMed

Lee, Han B; Sundberg, Brynn N; Sigafoos, Ashley N; Clark, Karl J

2016-01-01

Recent advancement in genome engineering technology is changing the landscape of biological research and providing neuroscientists with an opportunity to develop new methodologies to ask critical research questions. This advancement is highlighted by the increased use of programmable DNA-binding agents (PDBAs) such as transcription activator-like effector (TALE) and RNA-guided clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR associated (Cas) systems. These PDBAs fused or co-expressed with various effector domains allow precise modification of genomic sequences and gene expression levels. These technologies mirror and extend beyond classic gene targeting methods contributing to the development of novel tools for basic and clinical neuroscience. In this Review, we discuss the recent development in genome engineering and potential applications of this technology in the field of neuroscience.

Opportunities across Boundaries: Lessons from a Collaboratively Delivered Cross-Institution Master's Programme

ERIC Educational Resources Information Center

de Róiste, Mairéad; Breetzke, Gregory; Reitsma, Femke

2015-01-01

Advances in technology have created opportunities for collaborative multi-institution programme delivery which are increasingly attractive within a constrained financial environment. This paper details the development of a cross-institution collaboratively delivered masters and postgraduate diploma programme in Geographical Information Science in…

Students' Perception of Industrial Internship Programme

ERIC Educational Resources Information Center

Renganathan, Sumathi; Karim, Zainal Ambri Bin Abdul; Li, Chong Su

2012-01-01

Purpose: An important aspect of an academic curriculum in higher learning institutions for technical disciplines is the industrial internship programme for students. The purpose of this paper is to investigate students' perception of the effectiveness of an industrial internship programme offered by a private technological university in Malaysia.…

Transfer of radiation technology to developing countries

NASA Astrophysics Data System (ADS)

Markovic, Vitomir; Ridwan, Mohammad

1993-10-01

Transfer of technology is a complex process with many facets, options and constraints. While the concept is an important step in bringing industrialization process to agricultural based countries, it is clear, however, that a country will only benefit from a new technology if it addresses a real need, and if it can be absorbed and adapted to suit the existing cultural and technological base. International Atomic Energy Agency, as UN body, has a mandate to promote nuclear applicationsand assist Member States in transfer of technology for peaceful applications. This mandate has been pursued by many different mechanisms developed in the past years: technical assistance, coordinated research programmes, scientific and technical meetings, publications, etc. In all these activities the Agency is the organizer and initiator, but main contributions come from expert services from developed countries and, increasingly, from developing countries themselves. The technical cooperation among developing coutries more and more becomes part of different programmes. In particular, regional cooperation has been demonstrated as an effective instrument for transfer of technology from developed and among developing countries. Some examples of actual programmes are given.

Design and implementation of website information disclosure assessment system.

PubMed

Cho, Ying-Chiang; Pan, Jen-Yi

2015-01-01

Internet application technologies, such as cloud computing and cloud storage, have increasingly changed people's lives. Websites contain vast amounts of personal privacy information. In order to protect this information, network security technologies, such as database protection and data encryption, attract many researchers. The most serious problems concerning web vulnerability are e-mail address and network database leakages. These leakages have many causes. For example, malicious users can steal database contents, taking advantage of mistakes made by programmers and administrators. In order to mitigate this type of abuse, a website information disclosure assessment system is proposed in this study. This system utilizes a series of technologies, such as web crawler algorithms, SQL injection attack detection, and web vulnerability mining, to assess a website's information disclosure. Thirty websites, randomly sampled from the top 50 world colleges, were used to collect leakage information. This testing showed the importance of increasing the security and privacy of website information for academic websites.

An advanced programmable/reconfigurable color graphics display system for crew station technology research

NASA Technical Reports Server (NTRS)

Montoya, R. J.; England, J. N.; Hatfield, J. J.; Rajala, S. A.

1981-01-01

The hardware configuration, software organization, and applications software for the NASA IKONAS color graphics display system are described. The systems were created at the Langley Research Center Display Device Laboratory to develop, evaluate, and demonstrate advanced generic concepts, technology, and systems integration techniques for electronic crew station systems of future civil aircraft. A minicomputer with 64K core memory acts as a host for a raster scan graphics display generator. The architectures of the hardware system and the graphics display system are provided. The applications software features a FORTRAN-based model of an aircraft, a display system, and the utility program for real-time communications. The model accepts inputs from a two-dimensional joystick and outputs a set of aircraft states. Ongoing and planned work for image segmentation/generation, specialized graphics procedures, and higher level language user interface are discussed.

Technologies and Designs for Electronic Nanocomputers

NASA Technical Reports Server (NTRS)

Montemerlo, Michael S.; Love, J. Christopher; Opiteck, Gregory J.; Goldhaber, David J.; Ellenbogen, James C.

1995-01-01

Diverse space-related applications have been proposed for microscopic and sub-microscopic structures, mechanisms, and 'organisms'. To govern their functions, many of these tiny systems will require even smaller, nanometer-scale programmable computers, i.e. 'nanocomputers' on-board. This paper provides an overview of the results of a nearly two-year study of the technologies and designs that presently are in development for electronic nanocomputers. Strengths and weaknesses of the various technologies and designs are discussed, as well as promising directions for remedying some of the present research issues in this area. The presentation is a synopsis of a longer MITRE review article on the same subject.

Lex genetica: the law and ethics of programming biological code.

PubMed

Burk, Dan L

2002-01-01

Recent advances in genetic engineering now allow the design of programmable biological artifacts. Such programming may include usage constraints that will alter the balance of ownership and control for biotechnology products. Similar changes have been analyzed in the context of digital content management systems, and while this previous work is useful in analyzing issues related to biological programming, the latter technology presents new conceptual problems that require more comprehensive evaluation of the interplay between law and technologically embedded values. In particular, the ability to embed contractual terms in technological artifacts now requires a re-examination of disclosure and consent in transactions involving such artifacts.

A novel biomimetic sonarhead using beamforming technology to mimic bat echolocation.

PubMed

Steckel, Jan; Peremans, Herbert

2012-07-01

A novel biomimetic sonarhead has been developed to allow researchers of bat echolocation behavior and biomimetic sonar to perform experiments with a system similar to the bat¿s sensory system. The bat's echolocation-related transfer function (ERTF) is implemented using an array of receivers to implement the head-related transfer function (HRTF), and an array of emitters mounted on a cylindrical manifold to implement the emission pattern of the bat. The complete system is controlled by a field-programmable gate array (FPGA) based embedded system connected through a USB interface.

Utilization of sounding rockets and balloons in the German Space Programme

NASA Astrophysics Data System (ADS)

Preu, Peter; Friker, Achim; Frings, Wolfgang; Püttmann, Norbert

2005-08-01

Sounding rockets and balloons are important tools of Germany's Space Programme. DLR manages these activities and promotes scientific experiments and validation programmes within (1) Space Science, (2) Earth Observation, (3) Microgravity Research and (4) Re-entry Technologies (SHEFEX). In Space Science the present focus is at atmospheric research. Concerning Earth Observation balloon-borne measurements play a key role in the validation of atmospheric satellite sounders (ENVISAT). TEXUS and MAXUS sounding rockets are successfully used for short duration microgravity experiments. The Sharp Edge Flight Experiment SHEFEX will deliver data from a hypersonic flight for the validation of a new Thermal Protection System (TPS), wind tunnel testing and numerical analysis of aerothermodynamics. Signing the Revised Esrange and Andøya Special Project (EASP) Agreement 2006-2010 in June 2004 Germany has made an essential contribution to the long-term availability of the Scandinavian ranges for the European science community.

Home exercise programmes supported by video and automated reminders compared with standard paper-based home exercise programmes in patients with stroke: a randomized controlled trial.

PubMed

Emmerson, Kellie B; Harding, Katherine E; Taylor, Nicholas F

2017-08-01

To determine whether patients with stroke receiving rehabilitation for upper limb deficits using smart technology (video and reminder functions) demonstrate greater adherence to prescribed home exercise programmes and better functional outcomes when compared with traditional paper-based exercise prescription. Randomized controlled trial comparing upper limb home exercise programmes supported by video and automated reminders on smart technology, with standard paper-based home exercise programmes. A community rehabilitation programme within a large metropolitan health service. Patients with stroke with upper limb deficits, referred for outpatient rehabilitation. Participants were randomly assigned to the control (paper-based home exercise programme) or intervention group (home exercise programme filmed on an electronic tablet, with an automated reminder). Both groups completed their prescribed home exercise programme for four weeks. The primary outcome was adherence using a self-reported log book. Secondary outcomes were change in upper limb function and patient satisfaction. A total of 62 participants were allocated to the intervention ( n = 30) and control groups ( n = 32). There were no differences between the groups for measures of adherence (mean difference 2%, 95% CI -12 to 17) or change in the Wolf Motor Function Test log transformed time (mean difference 0.02 seconds, 95% CI -0.1 to 0.1). There were no between-group differences in how participants found instructions ( p = 0.452), whether they remembered to do their exercises ( p = 0.485), or whether they enjoyed doing their exercises ( p = 0.864). The use of smart technology was not superior to standard paper-based home exercise programmes for patients recovering from stroke. This trial design was registered prospectively with the Australian and New Zealand Clinical Trials Register, ID: ACTRN 12613000786796. http://www.anzctr.org.au/trialSearch.aspx.

ESA technology flies on Italian mini-satellite launched from Russia

NASA Astrophysics Data System (ADS)

2000-07-01

Owned by the Italian space agency (ASI) and developed by Carlo Gavazzi with contributions from many other Italian companies, MITA has two tasks to perform: in a circular orbit at 450 km altitude, the mini satellite will carry a cosmic particle detector, while its platform will be tested for the first time as a vehicle for future scientific missions. MITA also carries the MTS-AOMS payload (MicroTechSensor for Attitude and Orbit Measurement System), developed by Astrium in the framework of ESA's Technology Flight Opportunity trial programme. With the Technology Flight Opportunity scheme, funded by its General Studies Programme, ESA intends to provide access to space for European industry's technology products needing in-orbit demonstration to enhance their competitiveness on the space market. This new form of support to the European space industry ties in with ESA's strategy for fostering the competitiveness of European-made technology for eventual commercialisation. In-orbit demonstration is essential if new technologies are to compete on level terms on non-European markets. It thus consolidates strategic investments made by the space industry. The MTS-AOMS is a highly integrated sensor for autonomous attitude and orbit control systems. It combines three functions in one unit: Earth sensing, star sensing and magnetic field sensing. The equipment incorporates an active pixel array sensor and a 2-D fluxgate magnetometer. The aims of the flight are to verify in situ the payload's inherent functions and performance, which cannot be done on the ground, and to assess the behaviour of this type of technology when exposed to the space environment. The Technology Flight Opportunity rule is that ESA funds the launch and integration costs, industry the development and operating costs. According to present planning, two further in-orbit demonstrations funded by this scheme will be carried out between now and January 2001.

Diffusion and use of health technology assessment in policy making: what lessons for decentralised healthcare systems?

PubMed

Ciani, Oriana; Tarricone, Rosanna; Torbica, Aleksandra

2012-12-01

The Italian National Healthcare System (NHS) is one of the most decentralised systems since the devolution reform approved in 2001. HTA is spreading as an important tool for decision-making processes both at central and local levels. The aims of this study were to review the state of the health technology assessment (HTA) programmes in Italy - with a focus on regional and central initiatives - and to discuss consequences of a multi-level structure of HTA agencies in highly regionalised healthcare systems. Our method combined documentary review with interviews. We reviewed scientific literature about HTA's activities in decentralised systems, legislative and administrative documents from national as well as regional authorities. Semi-structured interviews were conducted with 18 key individuals associated with HTA both at the national and regional levels. Data on HTA programmes implemented or under development in nine regions were collected and analysed according to key principles for the improved conduct of health technology assessments for resource allocation decisions. HTA is in the early stage of development in Italy, although with great heterogeneity across regions. The National Agency for Health Services has certainly contributed to HTA diffusion through supporting and training activities. However, the multi-level structure of HTA in Italy has not yet provided full coordination and harmonisation of practices and outcomes across the country, with a consequent exacerbate inequality of access to services and technologies. There is probably need to rethink the multi-layer organizational framework of HTA in Italy by leveraging on current knowledge and efficient redistribution of activities across regions. We would advise for different jurisdictions playing different roles while achieving similar health outcomes for their patients, rather than jurisdictions aiming at doing exactly the same things resulting in unequal access to healthcare service provision. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Participant-Directed Evaluation: Using Teachers' Own Inquiries to Evaluate Professional Development in Technology Integration

ERIC Educational Resources Information Center

Ham, Vince

2010-01-01

Considering the high levels of time and money invested in teacher professional development programmes in information technologies over recent decades, questions arise as to how effective these programmes have been and by whose lights we are to judge. Based on a critical review of the evaluations of several of our own action-research-based…

The Business Model of E-Learning in UK Higher Education: Optimization through Outsourcing

ERIC Educational Resources Information Center

Steinberg, David Charles

2004-01-01

E-learning is not just an application of technology to teaching, but a new business model for higher education. By approaching e-learning as a business model, educational policymakers can begin to appreciate the scope of the integrated technology and services required to run a successful online degree programme or a blended programme that includes…

Perceptions and Career Prospects of the Distance Doctor of Education Degree: Voices from the Mid-Career ELT Tertiary Practitioners

ERIC Educational Resources Information Center

Kung, Fan-Wei

2017-01-01

The advancement of computer technologies has brought a plethora of technological innovations in educational settings. It is no exception in teacher training and education programmes around the world as the growth of professionalism has made the distance doctoral programmes possible for mid-career English language teaching (ELT) practitioners. The…

The Human Touch: Practical and Ethical Implications of Putting AI and Robotics to Work for Patients.

PubMed

Banks, Jim

2018-01-01

We live in a time when science fiction can quickly become science fact. Within a generation, the Internet has matured from a technological marvel to a utility, and mobile telephones have redefined how we communicate. Health care, as an industry, is quick to embrace technology, so it is no surprise that the application of programmable robotic systems that can carry out actions automatically and artificial intelligence (AI), e.g., machines that learn, solve problems, and respond to their environment, is being keenly explored.

Collision management utilizing CCD and remote sensing technology

NASA Technical Reports Server (NTRS)

Mcdaniel, Harvey E., Jr.

1995-01-01

With the threat of damage to aerospace systems (space station, shuttle, hypersonic a/c, solar power satellites, loss of life, etc.) from collision with debris (manmade/artificial), there exists an opportunity for the design of a novel system (collision avoidance) to be incorporated into the overall design. While incorporating techniques from ccd and remote sensing technologies, an integrated system utilized in the infrared/visible spectrum for detection, tracking, localization, and maneuvering from doppler shift measurements is achievable. Other analysis such as impact assessment, station keeping, chemical, and optical tracking/fire control solutions are possible through this system. Utilizing modified field programmable gated arrays (software reconfiguring the hardware) the mission and mission effectiveness can be varied. This paper outlines the theoretical operation of a prototype system as it applies to collision avoidance (to be followed up by research).

New developments in ground probing radar for Earth resource mapping and planetology

NASA Astrophysics Data System (ADS)

Cattermole, P. J.; Junkin, G.; Finkelstein, M. I.; Kingsley, S. P.

1992-07-01

Ground probing radar is a well established technique for locating buried objects and has found application in resource mapping. The development of this technology for the Mars exploration programme has lead to lightweight systems with potential applications for investigating shallow geological structures on Earth, Mars and Venus. Recent advances in ground probing radar technology for planetary exploration include the development of single-antenna systems with improved beam focussing into the ground and a move to lower frequencies which considerably extends the depth penetration in dry ground. These systems are designed for mobility and could form the basis of autonomous mapping systems for terrestrial exploration. Such systems would be particularly valuable for water resource surveying in arid and semi-arid regions, where there is a need to have lightweight instrumentation that can be moved into sometimes inhospitable terrain.

Clock jitter generator with picoseconds resolution

NASA Astrophysics Data System (ADS)

Jovanović, Goran; Stojčev, Mile; Nikolić, Tatjana

2013-06-01

The clock is one of the most critical signals in any synchronous system. As CMOS technology has scaled, supply voltages have dropped chip power consumption has increased and the effects of jitter due to clock frequency increase have become critical and jitter budget has become tighter. This article describes design and development of low-cost mixed-signal programmable jitter generator with high resolution. The digital technique is used for coarse-grain and an analogue technique for fine-grain clock phase shifting. Its structure allows injection of various random and deterministic jitter components in a controllable and programmable fashion. Each jitter component can be switched on or off. The jitter generator can be used in jitter tolerance test and jitter transfer function measurement of high-speed synchronous digital circuits. At operating system clock frequency of 220 MHz, a jitter with 4 ps resolution can be injected.

GLOBECOM '89 - IEEE Global Telecommunications Conference and Exhibition, Dallas, TX, Nov. 27-30, 1989, Conference Record. Volumes 1, 2, & 3

NASA Astrophysics Data System (ADS)

The present conference discusses topics in multiwavelength network technology and its applications, advanced digital radio systems in their propagation environment, mobile radio communications, switching programmability, advancements in computer communications, integrated-network management and security, HDTV and image processing in communications, basic exchange communications radio advancements in digital switching, intelligent network evolution, speech coding for telecommunications, and multiple access communications. Also discussed are network designs for quality assurance, recent progress in coherent optical systems, digital radio applications, advanced communications technologies for mobile users, communication software for switching systems, AI and expert systems in network management, intelligent multiplexing nodes, video and image coding, network protocols and performance, system methods in quality and reliability, the design and simulation of lightwave systems, local radio networks, mobile satellite communications systems, fiber networks restoration, packet video networks, human interfaces for future networks, and lightwave networking.

Development of new malaria diagnostics: matching performance and need.

PubMed

Bell, David; Fleurent, Alessandra E; Hegg, Michael C; Boomgard, John D; McConnico, Caitlin C

2016-08-11

Despite advances in diagnostic technology, significant gaps remain in access to malaria diagnosis. Accurate diagnosis and misdiagnosis leads to unnecessary waste of resources, poor disease management, and contributes to a cycle of poverty in low-resourced communities. Despite much effort and investment, few new technologies have reached the field in the last 30 years aside from lateral flow assays. This suggests that much diagnostic development effort has been misdirected, and/or that there are fundamental blocks to introduction of new technologies. Malaria diagnosis is a difficult market; resources are broadly donor-dependent, health systems in endemic countries are frequently weak, and the epidemiology of malaria and priorities of malaria programmes and donors are evolving. Success in diagnostic development will require a good understanding of programme gaps, and the sustainability of markets to address them. Targeting assay development to such clearly defined market requirements will improve the outcomes of product development funding. Six market segments are identified: (1) case management in low-resourced countries, (2) parasite screening for low density infections in elimination programmes, (3) surveillance for evidence of continued transmission, (4) clinical research and therapeutic efficacy monitoring, (5) cross-checking for microscopy quality control, and (6) returned traveller markets distinguished primarily by resource availability. While each of these markets is potentially compelling from a public health standpoint, size and scale are highly variable and continue to evolve. Consequently, return on investment in research and development may be limited, highlighting the need for potentially significant donor involvement or the introduction of novel business models to overcome prohibitive economics. Given the rather specific applications, a well-defined set of stakeholders will need to be on board for the successful introduction and scaling of any new technology to these markets.

Rapid customization system for 3D-printed splint using programmable modeling technique - a practical approach.

PubMed

Li, Jianyou; Tanaka, Hiroya

2018-01-01

Traditional splinting processes are skill dependent and irreversible, and patient satisfaction levels during rehabilitation are invariably lowered by the heavy structure and poor ventilation of splints. To overcome this drawback, use of the 3D-printing technology has been proposed in recent years, and there has been an increase in public awareness. However, application of 3D-printing technologies is limited by the low CAD proficiency of clinicians as well as unforeseen scan flaws within anatomic models.A programmable modeling tool has been employed to develop a semi-automatic design system for generating a printable splint model. The modeling process was divided into five stages, and detailed steps involved in construction of the proposed system as well as automatic thickness calculation, the lattice structure, and assembly method have been thoroughly described. The proposed approach allows clinicians to verify the state of the splint model at every stage, thereby facilitating adjustment of input content and/or other parameters to help solve possible modeling issues. A finite element analysis simulation was performed to evaluate the structural strength of generated models. A fit investigation was applied on fabricated splints and volunteers to assess the wearing experience. Manual modeling steps involved in complex splint designs have been programed into the proposed automatic system. Clinicians define the splinting region by drawing two curves, thereby obtaining the final model within minutes. The proposed system is capable of automatically patching up minor flaws within the limb model as well as calculating the thickness and lattice density of various splints. Large splints could be divided into three parts for simultaneous multiple printing. This study highlights the advantages, limitations, and possible strategies concerning application of programmable modeling tools in clinical processes, thereby aiding clinicians with lower CAD proficiencies to become adept with splint design process, thus improving the overall design efficiency of 3D-printed splints.

Flexible Architecture for FPGAs in Embedded Systems

NASA Technical Reports Server (NTRS)

Clark, Duane I.; Lim, Chester N.

2012-01-01

Commonly, field-programmable gate arrays (FPGAs) being developed in cPCI embedded systems include the bus interface in the FPGA. This complicates the development because the interface is complicated and requires a lot of development time and FPGA resources. In addition, flight qualification requires a substantial amount of time be devoted to just this interface. Another complication of putting the cPCI interface into the FPGA being developed is that configuration information loaded into the device by the cPCI microprocessor is lost when a new bit file is loaded, requiring cumbersome operations to return the system to an operational state. Finally, SRAM-based FPGAs are typically programmed via specialized cables and software, with programming files being loaded either directly into the FPGA, or into PROM devices. This can be cumbersome when doing FPGA development in an embedded environment, and does not have an easy path to flight. Currently, FPGAs used in space applications are usually programmed via multiple space-qualified PROM devices that are physically large and require extra circuitry (typically including a separate one-time programmable FPGA) to enable them to be used for this application. This technology adds a cPCI interface device with a simple, flexible, high-performance backend interface supporting multiple backend FPGAs. It includes a mechanism for programming the FPGAs directly via the microprocessor in the embedded system, eliminating specialized hardware, software, and PROM devices and their associated circuitry. It has a direct path to flight, and no extra hardware and minimal software are required to support reprogramming in flight. The device added is currently a small FPGA, but an advantage of this technology is that the design of the device does not change, regardless of the application in which it is being used. This means that it needs to be qualified for flight only once, and is suitable for one-time programmable devices or an application specific integrated circuit (ASIC). An application programming interface (API) further reduces the development time needed to use the interface device in a system.

Field testing of a next generation pointer/tracker for IRCM

NASA Astrophysics Data System (ADS)

Chapman, Stuart; Wildgoose, Iain; McDonald, Eric; Duncan, Stuart

2008-10-01

SELEX Galileo has been involved in the development, manufacture and support of high performance electro-optic pointing and stabilisation systems for over forty years. The Company currently supplies the pointer/trackers for the AN/AAQ-24(V) NEMESIS DIRCM system, for which over 1,000 combat-proven units have been produced and deployed in the US, the UK and other nations. In 2007, SELEX Galileo embarked on an internally funded programme to develop ECLIPSE, a new advanced, lightweight, low-cost IRCM pointer/tracker, exploiting the extensive knowledge and experience gained from previous targeting and IRCM programmes. The ECLIPSE design is centred on a low inertia, two-axis servo mechanism with a strap-down inertial sensor and advanced sightline control algorithms, allowing effective tracking through the nadir and providing superior sightline performance. The programme involved the production of three demonstrator units in 2007, and two pre-production units in 2008. The demonstrator units were first trialled as part of a NEMESIS DIRCM system in late 2007, and in April 2008 100% success was achieved in jamming live-fire demonstrations. Helicopter installation and ground testing of a UK only trials system is complete, initial flight testing has just begun, and the airborne test and evaluation scheduled for late summer 2008 will bring the ECLIPSE System to technology readiness to level 7 (TRL7). This paper describes the Eclipse performance demonstrated to date.

Evaluation and Validation (E&V) Team Public Report. Volume 2.

DTIC Science & Technology

1985-11-30

Byron, Countess of Lovelace. The Countess was an associate of Charles Babbage and is presumed to be the world’s first programmer (Barnes, 1982:2...by DDT&E, STARS, and AJPO personnel, as appropriate. 4.20.9 Focal Point The DDT&E and STARS focal points, respectively, are indicated below Charles K...Technology For Adaptable, Reliable Systems Major Charles W. Lillie from Headquarters Air Force Systems Command gave a presentation concerning Software For

Recent advances in inkjet dispensing technologies: applications in drug discovery.

PubMed

Zhu, Xiangcheng; Zheng, Qiang; Yang, Hu; Cai, Jin; Huang, Lei; Duan, Yanwen; Xu, Zhinan; Cen, Peilin

2012-09-01

Inkjet dispensing technology is a promising fabrication methodology widely applied in drug discovery. The automated programmable characteristics and high-throughput efficiency makes this approach potentially very useful in miniaturizing the design patterns for assays and drug screening. Various custom-made inkjet dispensing systems as well as specialized bio-ink and substrates have been developed and applied to fulfill the increasing demands of basic drug discovery studies. The incorporation of other modern technologies has further exploited the potential of inkjet dispensing technology in drug discovery and development. This paper reviews and discusses the recent developments and practical applications of inkjet dispensing technology in several areas of drug discovery and development including fundamental assays of cells and proteins, microarrays, biosensors, tissue engineering, basic biological and pharmaceutical studies. Progression in a number of areas of research including biomaterials, inkjet mechanical systems and modern analytical techniques as well as the exploration and accumulation of profound biological knowledge has enabled different inkjet dispensing technologies to be developed and adapted for high-throughput pattern fabrication and miniaturization. This in turn presents a great opportunity to propel inkjet dispensing technology into drug discovery.

Genome-scale engineering for systems and synthetic biology

PubMed Central

Esvelt, Kevin M; Wang, Harris H

2013-01-01

Genome-modification technologies enable the rational engineering and perturbation of biological systems. Historically, these methods have been limited to gene insertions or mutations at random or at a few pre-defined locations across the genome. The handful of methods capable of targeted gene editing suffered from low efficiencies, significant labor costs, or both. Recent advances have dramatically expanded our ability to engineer cells in a directed and combinatorial manner. Here, we review current technologies and methodologies for genome-scale engineering, discuss the prospects for extending efficient genome modification to new hosts, and explore the implications of continued advances toward the development of flexibly programmable chasses, novel biochemistries, and safer organismal and ecological engineering. PMID:23340847

Flexible implementation of front-end bioelectric signal amplifier using FPAA for telemedicine system.

PubMed

Chan, U Fai; Chan, Wai Wong; Pun, Sio Hang; Vai, Mang I; Mak, Peng Un

2007-01-01

Traditional/Current electronic circuits for Telemedicine have significant performance on certain bioelectric signal detection. However, it is rarely seen that can handle multiple signals without changing of hardware. This paper introduces a general front-end amplifier for various bioelectric signals based on Field Programmable Analogy Array (FPAA) Technology. Employing FPAA technology, the implemented amplifier can be adapted for various bioelectric signals without alternating the circuitry while its compact size (core parts < 2 cm2) provides an alternative solution for miniaturized Telemedicine system and Wearable Devices. The proposed design implementation has demonstrated, through successfully ECG and EMG signal extractions, a quick way to miniaturize analog biomedical circuit in a convenient and cost effective way.

Hybrid CMOS/Molecular Integrated Circuits

NASA Astrophysics Data System (ADS)

Stan, M. R.; Rose, G. S.; Ziegler, M. M.

CMOS silicon technologies are likely to run out of steam in the next 10-15 years despite revolutionary advances in the past few decades. Molecular and other nanoscale technologies show significant promise but it is unlikely that they will completely replace CMOS, at least in the near term. This chapter explores opportunities for using CMOS and nanotechnology to enhance and complement each other in hybrid circuits. As an example of such a hybrid CMOS/nano system, a nanoscale programmable logic array (PLA) based on majority logic is described along with its supplemental CMOS circuitry. It is believed that such systems will be able to sustain the historical advances in the semiconductor industry while addressing manufacturability, yield, power, cost, and performance challenges.

TBT: Telecommunications-Based Training in the 90s (DELTA Programme--Action Line III). Proceedings of the Workshop (Madrid, Spain, January 21-22, 1991).

ERIC Educational Resources Information Center

Commission of the European Communities, Brussels (Belgium).

This report contains a collection of papers presented at a workshop on telecommunications-based training systems as part of the DELTA (Developing European Learning through Technological Advance) Action Line III, which addressed research in telecommunications for open and distance education. The following presentations are included: (1)…

Technology-Enhanced Physics Programme for Community-Based Science Learning: Innovative Design and Programme Evaluation in a Theme Park

NASA Astrophysics Data System (ADS)

Tho, Siew Wei; Chan, Ka Wing; Yeung, Yau Yuen

2015-10-01

In this study, a new physics education programme is specifically developed for a famous theme park in Hong Kong to provide community-based science learning to her visitors, involving her three newly constructed rides. We make innovative use of digital technologies in this programme and incorporate a rigorous evaluation of the learning effectiveness of the programme. A total of around 200 students from nine local secondary schools participated in both the physics programme and its subsequent evaluation which consists of a combination of research and assessment tools, including pre- and post-multiple-choice tests, a questionnaire survey and an interview as specifically developed for this programme, or adopted from some well-accepted research instruments. Based on the evaluation of students' academic performance, there are two educationally significant findings on enhancing the students' physics learning: (a) traditionally large gender differences in physics performance and interest of learning are mostly eliminated; and (b) a less-exciting ride called the aviator (instead of the most exciting roller-coaster ride) can induce the largest learning effect (or gain in academic performance) amongst teenagers. Besides, findings from the questionnaire survey and interviews of participants are reported to reveal their views, perceptions, positive and negative comments or feedback on this programme which could provide valuable insights for future development of other similar community-based programmes.

The photovoltaic pilot projects of the European Community

NASA Astrophysics Data System (ADS)

Schnell, W.

The Commission of the European Communities has started in 1980 a programme for the design and construction of a series of photovoltaic pilot projects in the range of 30-300 kWp. Virtually all important industries and other development organisations in Europe working on photovoltaic cells and systems are involved in this programme. The different technologies which are being developed concern the modules, the cabling of the array, structure design, storage strategy and power conditioning. The various applications include powering of an island, villages, recreation centres, water desalination and disinfection, powering of radio transmitters, emergency power plants, dairy farm, training school, cooling, water pumping, powering of a solar heated swimming pool and last but not least, hydrogen production.

Frequency Agile Transceiver for Advanced Vehicle Data Links

NASA Technical Reports Server (NTRS)

Freudinger, Lawrence C.; Macias, Filiberto; Cornelius, Harold

2009-01-01

Emerging and next-generation test instrumentation increasingly relies on network communication to manage complex and dynamic test scenarios, particularly for uninhabited autonomous systems. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. Frequency agility is one characteristic of reconfigurable radios that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate a promising chipset that performs conversion of RF signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit, programmable for any frequency band between 1 MHz and 6 GHz.

Programmable Low-Power Low-Noise Capacitance to Voltage Converter for MEMS Accelerometers

PubMed Central

Royo, Guillermo; Sánchez-Azqueta, Carlos; Gimeno, Cecilia; Aldea, Concepción; Celma, Santiago

2016-01-01

In this work, we present a capacitance-to-voltage converter (CVC) for capacitive accelerometers based on microelectromechanical systems (MEMS). Based on a fully-differential transimpedance amplifier (TIA), it features a 34-dB transimpedance gain control and over one decade programmable bandwidth, from 75 kHz to 1.2 MHz. The TIA is aimed for low-cost low-power capacitive sensor applications. It has been designed in a standard 0.18-μm CMOS technology and its power consumption is only 54 μW. At the maximum transimpedance configuration, the TIA shows an equivalent input noise of 42 fA/Hz at 50 kHz, which corresponds to 100 μg/Hz. PMID:28042830

Programmable Low-Power Low-Noise Capacitance to Voltage Converter for MEMS Accelerometers.

PubMed

Royo, Guillermo; Sánchez-Azqueta, Carlos; Gimeno, Cecilia; Aldea, Concepción; Celma, Santiago

2016-12-30

In this work, we present a capacitance-to-voltage converter (CVC) for capacitive accelerometers based on microelectromechanical systems (MEMS). Based on a fully-differential transimpedance amplifier (TIA), it features a 34-dB transimpedance gain control and over one decade programmable bandwidth, from 75 kHz to 1.2 MHz. The TIA is aimed for low-cost low-power capacitive sensor applications. It has been designed in a standard 0.18-μm CMOS technology and its power consumption is only 54 μW. At the maximum transimpedance configuration, the TIA shows an equivalent input noise of 42 fA/ Hz at 50 kHz, which corresponds to 100 μg/ Hz .

Engineering Synthetic Gene Circuits in Living Cells with CRISPR Technology.

PubMed

Jusiak, Barbara; Cleto, Sara; Perez-Piñera, Pablo; Lu, Timothy K

2016-07-01

One of the goals of synthetic biology is to build regulatory circuits that control cell behavior, for both basic research purposes and biomedical applications. The ability to build transcriptional regulatory devices depends on the availability of programmable, sequence-specific, and effective synthetic transcription factors (TFs). The prokaryotic clustered regularly interspaced short palindromic repeat (CRISPR) system, recently harnessed for transcriptional regulation in various heterologous host cells, offers unprecedented ease in designing synthetic TFs. We review how CRISPR can be used to build synthetic gene circuits and discuss recent advances in CRISPR-mediated gene regulation that offer the potential to build increasingly complex, programmable, and efficient gene circuits in the future. Copyright © 2016. Published by Elsevier Ltd.

Implementation science: the laboratory as a command centre.

PubMed

Boeras, Debrah I; Nkengasong, John N; Peeling, Rosanna W

2017-03-01

Recent advances in point-of-care technologies to ensure universal access to affordable quality-assured diagnostics have the potential to transform patient management, surveillance programmes, and control of infectious diseases. Decentralization of testing can put tremendous stresses on fragile health systems if the laboratory is not involved in the planning, introduction, and scale-up strategies. The impact of investments in novel technologies can only be realized if these tests are evaluated, adopted, and scaled up within the healthcare system with appropriate planning and understanding of the local contexts in which these technologies will be used. In this digital age, the laboratory needs to take on the role of the Command Centre for technology introduction and implementation. Implementation science is needed to understand the political, cultural, economic, and behavioural context for technology introduction. The new paradigm should include: building a comprehensive system of laboratories and point-of-care testing sites to provide quality-assured diagnostic services with good laboratory-clinic interface to build trust in test results and linkage to care; building and coordinating a comprehensive national surveillance and communication system for disease control and global health emergencies; conducting research to monitor the impact of new tools and interventions on improving patient care.

CRISPR/Cas9 Platforms for Genome Editing in Plants: Developments and Applications.

PubMed

Ma, Xingliang; Zhu, Qinlong; Chen, Yuanling; Liu, Yao-Guang

2016-07-06

The clustered regularly interspaced short palindromic repeat (CRISPR)-associated protein9 (Cas9) genome editing system (CRISPR/Cas9) is adapted from the prokaryotic type II adaptive immunity system. The CRISPR/Cas9 tool surpasses other programmable nucleases, such as ZFNs and TALENs, for its simplicity and high efficiency. Various plant-specific CRISPR/Cas9 vector systems have been established for adaption of this technology to many plant species. In this review, we present an overview of current advances on applications of this technology in plants, emphasizing general considerations for establishment of CRISPR/Cas9 vector platforms, strategies for multiplex editing, methods for analyzing the induced mutations, factors affecting editing efficiency and specificity, and features of the induced mutations and applications of the CRISPR/Cas9 system in plants. In addition, we provide a perspective on the challenges of CRISPR/Cas9 technology and its significance for basic plant research and crop genetic improvement. Copyright © 2016 The Author. Published by Elsevier Inc. All rights reserved.

Student Learning Support Programmes That Demonstrate Tangible Impact on Retention, Pass Rates & Completion. 2nd Edition

ERIC Educational Resources Information Center

Manalo, Emmanuel, Ed.; Marshall, Jenny, Ed.; Fraser, Cath, Ed.

2010-01-01

This report comprises summations and brief case descriptions of some of the effective programmes and other support mechanisms that New Zealand Tertiary Learning Advisors (TLAs) provide for students in universities, polytechnics, institutes of technology, and other tertiary institutions. The programmes demonstrate tangible impact on student…

The Role of Arts-Related Information and Communication Technology Use in Problem Solving and Achievement: Findings from the Programme for International Student Assessment

ERIC Educational Resources Information Center

Liem, Gregory Arief D.; Martin, Andrew J.; Anderson, Michael; Gibson, Robyn; Sudmalis, David

2014-01-01

Drawing on the Programme for International Student Assessment 2003 data set comprising over 190,000 15-year-old students in 25 countries, the current study sought to examine the role of arts-related information and communication technology (ICT) use in students' problem-solving skill and science and mathematics achievement. Structural equation…

"Don't Be a Smart Arse": Social Enterprise-Based Transitional Labour-Market Programmes as Neo-Liberal Technologies of the Self

ERIC Educational Resources Information Center

Kelly, Peter James; Campbell, Perri Bree Ellis; Harrison, Lyn

2015-01-01

In this paper we re-visit the work of celebrity chef Jamie Oliver and the social enterprise Fifteen Foundation and their development of a programme designed to train unemployed young people in the hospitality industry. We argue, drawing on the Foucauldian literature on governmentality and technologies of the self, that social enterprise-based…

Use of Data Quality Index in Student Feedback for Quality Assurance of Engineering Programmes at the Military Technological College, Muscat, Oman

ERIC Educational Resources Information Center

Khan, Wasi Uz Zaman; AlAjmi, Abdullah Ahmed Ali; Al Zubaidy, Sarim

2018-01-01

This case study was undertaken to assess the effectiveness of the modifications into the engineering programmes adopted by the Military Technological College (MTC) to satisfy the needs of Omani armed forces. It discusses the role of Quality Assurance (QA) in engineering education and accreditation process in the context of four engineering…

Perception of Pre-Service Teachers' towards the Teaching Practice Programme in College of Technology Education, University of Education, Winneba

ERIC Educational Resources Information Center

Amankwah, Francis; Oti-Agyen, Philip; Sam, Francis Kwame

2017-01-01

The descriptive survey design was used to find out the perception of pre-service teachers on teaching practice (on-campus) as an initial teacher preparation programme in University of Education, Winneba. A simple random sampling was used to select 226 pre-service teachers from the College of Technology Education, Kumasi. Data for the study were…

Student Teachers of Technology and Design into Industry: A Northern Ireland Case Study

ERIC Educational Resources Information Center

Gibson, Ken

2013-01-01

This paper, based in Northern Ireland, is a case study of an innovative programme which places year 3 B.Ed. post-primary student teachers of Technology and Design into industry for a five-day period. The industrial placement programme is set in an international context of evolving pre-service field placements and in a local context defined by the…

Appraisal of Information and Communication Technology Courses in Business Education Programme of Universities in South East Nigeria

ERIC Educational Resources Information Center

Ile, Chika Madu; Ementa, Christiana Ngozi

2016-01-01

The trend of Information and Communication Technology (ICT) usage in the business world necessitates that business education students be fortified with ICT skills as to be relevant and highly valued in the job market. The purpose of the study was to examine the four-year standard academic degree programme in business education department of five…

Secondary prevention at 360°: the important role of diagnostic imaging.

PubMed

Ciarrapico, Anna Micaela; Manenti, Guglielmo; Pistolese, Chiara; Fabiano, Sebastiano; Fiori, Roberto; Romagnoli, Andrea; Sergiacomi, Gianluigi; Stefanini, Matteo; Simonetti, Giovanni

2015-06-01

The aim of this paper is to underline the importance of the role of general practitioners (GPs) in distributing vital information about prevention to citizens, to highlight the importance of the so-called voluntary prevention programmes, both for conditions for which no organised screening programmes exist and for those for which they do exist but may well be obsolete or inefficient. Nowadays, voluntary prevention is made more effective thanks to the new sophisticated diagnostic technologies applied worldwide by diagnostic imaging. Epidemiological data about the incidence and causes of death among the Italian population have shown that screening programmes should be aimed first at fighting the following diseases: prostatic carcinoma, lung cancer, colorectal carcinoma, breast cancer, cardiovascular disease, cerebrovascular disease, aortic and peripheral vascular disease. GPs do not generally give good or adequate instructions concerning voluntary prevention programmes; GPs may not even be aware of this type of prevention which could represent a valuable option together with the existing mass screening programmes. Therefore, in the following analysis, we aim to outline the correct diagnostic pathway for the prevention of diseases having the highest incidence in our country and which represent the most frequent causes of death. If used correctly, these screening programmes may contribute to the success of secondary prevention, limiting the use of tertiary prevention and thus producing savings for the Italian National Health System.

Observable measure of quantum coherence in finite dimensional systems.

PubMed

Girolami, Davide

2014-10-24

Quantum coherence is the key resource for quantum technology, with applications in quantum optics, information processing, metrology, and cryptography. Yet, there is no universally efficient method for quantifying coherence either in theoretical or in experimental practice. I introduce a framework for measuring quantum coherence in finite dimensional systems. I define a theoretical measure which satisfies the reliability criteria established in the context of quantum resource theories. Then, I present an experimental scheme implementable with current technology which evaluates the quantum coherence of an unknown state of a d-dimensional system by performing two programmable measurements on an ancillary qubit, in place of the O(d2) direct measurements required by full state reconstruction. The result yields a benchmark for monitoring quantum effects in complex systems, e.g., certifying nonclassicality in quantum protocols and probing the quantum behavior of biological complexes.

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using a Field- Programmable Gate Array—Application-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique

PubMed Central

Li, Bingyi; Chen, Liang; Wei, Chunpeng; Xie, Yizhuang; Chen, He; Yu, Wenyue

2017-01-01

With the development of satellite load technology and very large scale integrated (VLSI) circuit technology, onboard real-time synthetic aperture radar (SAR) imaging systems have become a solution for allowing rapid response to disasters. A key goal of the onboard SAR imaging system design is to achieve high real-time processing performance with severe size, weight, and power consumption constraints. In this paper, we analyse the computational burden of the commonly used chirp scaling (CS) SAR imaging algorithm. To reduce the system hardware cost, we propose a partial fixed-point processing scheme. The fast Fourier transform (FFT), which is the most computation-sensitive operation in the CS algorithm, is processed with fixed-point, while other operations are processed with single precision floating-point. With the proposed fixed-point processing error propagation model, the fixed-point processing word length is determined. The fidelity and accuracy relative to conventional ground-based software processors is verified by evaluating both the point target imaging quality and the actual scene imaging quality. As a proof of concept, a field- programmable gate array—application-specific integrated circuit (FPGA-ASIC) hybrid heterogeneous parallel accelerating architecture is designed and realized. The customized fixed-point FFT is implemented using the 130 nm complementary metal oxide semiconductor (CMOS) technology as a co-processor of the Xilinx xc6vlx760t FPGA. A single processing board requires 12 s and consumes 21 W to focus a 50-km swath width, 5-m resolution stripmap SAR raw data with a granularity of 16,384 × 16,384. PMID:28672813

A Spaceborne Synthetic Aperture Radar Partial Fixed-Point Imaging System Using a Field- Programmable Gate Array-Application-Specific Integrated Circuit Hybrid Heterogeneous Parallel Acceleration Technique.

PubMed

Yang, Chen; Li, Bingyi; Chen, Liang; Wei, Chunpeng; Xie, Yizhuang; Chen, He; Yu, Wenyue

2017-06-24

With the development of satellite load technology and very large scale integrated (VLSI) circuit technology, onboard real-time synthetic aperture radar (SAR) imaging systems have become a solution for allowing rapid response to disasters. A key goal of the onboard SAR imaging system design is to achieve high real-time processing performance with severe size, weight, and power consumption constraints. In this paper, we analyse the computational burden of the commonly used chirp scaling (CS) SAR imaging algorithm. To reduce the system hardware cost, we propose a partial fixed-point processing scheme. The fast Fourier transform (FFT), which is the most computation-sensitive operation in the CS algorithm, is processed with fixed-point, while other operations are processed with single precision floating-point. With the proposed fixed-point processing error propagation model, the fixed-point processing word length is determined. The fidelity and accuracy relative to conventional ground-based software processors is verified by evaluating both the point target imaging quality and the actual scene imaging quality. As a proof of concept, a field- programmable gate array-application-specific integrated circuit (FPGA-ASIC) hybrid heterogeneous parallel accelerating architecture is designed and realized. The customized fixed-point FFT is implemented using the 130 nm complementary metal oxide semiconductor (CMOS) technology as a co-processor of the Xilinx xc6vlx760t FPGA. A single processing board requires 12 s and consumes 21 W to focus a 50-km swath width, 5-m resolution stripmap SAR raw data with a granularity of 16,384 × 16,384.

Training in the prevention of cervical cancer: advantages of e-learning

PubMed Central

Company, Assumpta; Montserrat, Mireia; Bosch, Francesc X; de Sanjosé, Silvia

2015-01-01

Cervical cancer remains the second most common cancer for women worldwide and is the cancer priority in most low- and middle-income countries (LMIC). The development of vaccines against the human papilloma virus (HPV) and the impact of technology both for the detection of HPV and cervical cancer represent milestones and new opportunities in prevention. New internet-based technologies are generating mass access to training programmes. This article presents the methodology for developing an online training programme for the prevention of cervical cancer as well as the results obtained during the four year period wherein the same programme was delivered in Latin America. PMID:26557878

Training in the prevention of cervical cancer: advantages of e-learning.

PubMed

Company, Assumpta; Montserrat, Mireia; Bosch, Francesc X; de Sanjosé, Silvia

2015-01-01

Cervical cancer remains the second most common cancer for women worldwide and is the cancer priority in most low- and middle-income countries (LMIC). The development of vaccines against the human papilloma virus (HPV) and the impact of technology both for the detection of HPV and cervical cancer represent milestones and new opportunities in prevention. New internet-based technologies are generating mass access to training programmes. This article presents the methodology for developing an online training programme for the prevention of cervical cancer as well as the results obtained during the four year period wherein the same programme was delivered in Latin America.

Project support of practical training in biophysics.

PubMed

Mornstein, V; Vlk, D; Forytkova, L

2006-01-01

The Department of Biophysics ensures practical training in biophysics and related subjects for students of medical and health study programmes. Demonstrations of medical technology are an important part of this training. Teaching for Faculty of Sciences in biophysical study programmes becomes also very important. Some lectures and demonstrations of technology are involved, but the practical trainig is missing. About 1 mil. CZK for additional laboratory equipment was obtained from the HEIDF project No. 1866/ 2005 "The demonstration and measuring technology for education in medical biophysics and radiological physics" for measuring system DEWETRON for high frequency signal analysis, Fluke Ti30 IR camera, PM 9000B patient monitor, ARSENAL AF 1 fluorescence microscope, and Nikon Coolpix 4500 digital camera with accessories for microphotography. At the present time, further financial resources are being provided by a development project of Ministry of Education "Inter-university co-operation in biomedical technology and engineering using top technologies" in total amount of almost 5 mil CZK, whereas over 2 mil CZK from this project are reserved for student laboratory equipment. The main goal of this project is to ensure the participation of Medical Faculty in educational co-operation in the biomedical technology and engineering, namely with the Faculty of Electrical Engineering and Communication (FEEC), Brno University of Technology. There will be taught those areas of biophysics which are not covered by FEEC, thus forming a separate subject "General Biophysics". The following instruments will be installed: UV-VIS spectrophotometers, rotation viscometers, tensiometers, microscopes with digital image processing, cooled centrifuge, optical benches, and some smaller instruments for practical measurements.

Methods and Systems for Configuring Sensor Acquisition Based on Pressure Steps

NASA Technical Reports Server (NTRS)

DeDonato, Mathew (Inventor)

2015-01-01

Technologies are provided for underwater measurements. A system includes an underwater vessels including: a plurality of sensors disposed thereon for measuring underwater properties; and a programmable controller configured to selectively activate the plurality of sensors based at least in part on underwater pressure. A user may program at what pressure ranges certain sensors are activated to measure selected properties, and may also program the ascent/descent rate of the underwater vessel, which is correlated with the underwater pressure.

Radiation Tolerant, FPGA-Based SmallSat Computer System

NASA Technical Reports Server (NTRS)

LaMeres, Brock J.; Crum, Gary A.; Martinez, Andres; Petro, Andrew

2015-01-01

The Radiation Tolerant, FPGA-based SmallSat Computer System (RadSat) computing platform exploits a commercial off-the-shelf (COTS) Field Programmable Gate Array (FPGA) with real-time partial reconfiguration to provide increased performance, power efficiency and radiation tolerance at a fraction of the cost of existing radiation hardened computing solutions. This technology is ideal for small spacecraft that require state-of-the-art on-board processing in harsh radiation environments but where using radiation hardened processors is cost prohibitive.

CERN launches high-school internship programme

NASA Astrophysics Data System (ADS)

Johnston, Hamish

2017-07-01

The CERN particle-physics lab has hosted 22 high-school students from Hungary in a pilot programme designed to show teenagers how science, technology, engineering and mathematics is used at the particle-physics lab.

Issues in Developing Programmes to Support Teachers of Philology in Using Information and Communications Technologies in Greek Schools: A Case Study

ERIC Educational Resources Information Center

Fragkouli, Elpiniki; Hammond, Michael

2007-01-01

This paper reports on a case study of an in-service teacher-training programme for Greek philology teachers, from 2002 to 2003, which was designed to develop the use of information and communications technologies in their teaching. It draws on questionnaires and interviews with 34 teachers who took part in the training. In addition, the three…

The Hayes principles: learning from the national pilot of information technology and core generalisable theory in informatics.

PubMed

de Lusignan, Simon; Krause, Paul

2010-01-01

There has been much criticism of the NHS national programme for information technology (IT); it has been an expensive programme and some elements appear to have achieved little. The Hayes report was written as an independent review of health and social care IT in England. To identify key principles for health IT implementation which may have relevance beyond the critique of NHS IT. We elicit ten principles from the Hayes report, which if followed may result in more effective IT implementation in health care. They divide into patient-centred, subsidiarity and strategic principles. The patient-centred principles are: 1) the patient must be at the centre of all information systems; 2) the provision of patient-level operational data should form the foundation - avoid the dataset mentality; 3) store health data as close to the patient as possible; 4) enable the patient to take a more active role with their health data within a trusted doctor-patient relationship. The subsidiarity principles set out to balance the local and health-system-wide needs: 5) standardise centrally - patients must be able to benefit from interoperability; 6) provide a standard procurement package and an approved process that ensures safety standards and provision of interoperable systems; 7) authorise a range of local suppliers so that health providers can select the system best meeting local needs; 8) allow local migration from legacy systems, as and when improved functionality for patients is available. And finally the strategic principles: 9) evaluate health IT systems in terms of measureable benefits to patients; 10) strategic planning of systems should reflect strategic goals for the health of patients/the population. Had the Hayes principles been embedded within our approach to health IT, and in particular to medical record implementation, we might have avoided many of the costly mistakes with the UK national programme. However, these principles need application within the modern IT environment. Closeness to the patient must not be interpreted as physical but instead as a virtual patient-centred space; data will be secure within the cloud and we should dump the vault and infrastructure mentality. Health IT should be developed as an adaptive ecosystem.

A Research-Informed, School-Based Professional Development Workshop Programme to Promote Dialogic Teaching with Interactive Technologies

ERIC Educational Resources Information Center

Hennessy, Sara; Dragovic, Tatjana; Warwick, Paul

2018-01-01

The study reported in this article investigated the influence of a research-informed, school-based, professional development workshop programme on the quality of classroom dialogue using the interactive whiteboard (IWB). The programme aimed to develop a dialogic approach to teaching and learning mediated through more interactive uses of the IWB,…

Curriculum Assessment as a Direct Tool in ABET Outcomes Assessment in a Chemical Engineering Programme

ERIC Educational Resources Information Center

Abu-Jdayil, Basim; Al-Attar, Hazim

2010-01-01

The chemical engineering programme at the United Arab Emirates University is designed to fulfil the Accreditation Board for Engineering and Technology (ABET) (A-K) EC2000 criteria. The Department of Chemical & Petroleum Engineering has established a well-defined process for outcomes assessment for the chemical engineering programme in order to…

Constructively Aligning Technologies with Learning and Assessment in a Distance Education Master's Programme

ERIC Educational Resources Information Center

Rogerson-Revell, Pamela

2015-01-01

This paper reports on an action research study investigating the use of online learning activities or "e-tivities" to enhance the learning and assessment experience of students on a distance master's programme. The study suggests that to be successfully integrated in a programme, such activities need to be carefully aligned with learning…

Laser Metalworking Technology Transfer.

DTIC Science & Technology

1986-01-01

TI 59 programmable calculator /printer...the .4 one-dimensional heat flow model and should not be used for low processing speed. The program is written for use on a Texas Instrument TI 59 programmable calculator with...speed range, and a three-dimensional model for the low speed ranges. The program is written for use on a Texas Instrument TI 59 . * programmable calculator

Design of video processing and testing system based on DSP and FPGA

NASA Astrophysics Data System (ADS)

Xu, Hong; Lv, Jun; Chen, Xi'ai; Gong, Xuexia; Yang, Chen'na

2007-12-01

Based on high speed Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA), a video capture, processing and display system is presented, which is of miniaturization and low power. In this system, a triple buffering scheme was used for the capture and display, so that the application can always get a new buffer without waiting; The Digital Signal Processor has an image process ability and it can be used to test the boundary of workpiece's image. A video graduation technology is used to aim at the position which is about to be tested, also, it can enhance the system's flexibility. The character superposition technology realized by DSP is used to display the test result on the screen in character format. This system can process image information in real time, ensure test precision, and help to enhance product quality and quality management.

The technology management process at the European space agency

NASA Astrophysics Data System (ADS)

Guglielmi, M.; Williams, E.; Groepper, P.; Lascar, S.

2010-03-01

Technology is developed at the European Space Agency (ESA) under several programmes: corporate and domain specific, mandatory and optional, with different time horizons and covering different levels of the TRL scale. To improve the transparency and efficiency of the complete process, it was felt necessary to establish an agreed end to end process for the management of all technology R&D activity that could: Include all ESA programmes and consider the requirements of European users Lead to coordinated multi-year work plan and yearly procurement plans Prepare and enable future European space programmes Be harmonized with national initiatives in Europe Thereby establishing the basis for a product policy to reduce risks to technology users, reduce costs and delays, and enhance industrial competitiveness and non-dependence. In response to the above needs, ESA has developed a technology management process called the ESA End-to-End process (E2E), from establishment of the strategy to the monitoring and evaluation of R&D results. In this paper, the complete process will be described in detail including a discussion on its strengths and limitations, and its links to the wider European Harmonization process. The paper will be concluded with the introduction of the ESA Technology Tree: a basic tool to structure and facilitate communication about technology issues.

A 1microW 85nV/ radicalHz pseudo open-loop preamplifier with programmable band-pass filter for neural interface system.

PubMed

Chang, Sun-Il; Yoon, Euisik

2009-01-01

We report an energy efficient pseudo open-loop amplifier with programmable band-pass filter developed for neural interface systems. The proposed amplifier consumes 400nA at 2.5V power supply. The measured thermal noise level is 85nV/ radicalHz and input-referred noise is 1.69microV(rms) from 0.3Hz to 1 kHz. The amplifier has a noise efficiency factor of 2.43, the lowest in the differential topologies reported up to date to our knowledge. By programming the switched-capacitor frequency and bias current, we could control the bandwidth of the preamplifier from 138 mHz to 2.2 kHz to meet various application requirements. The entire preamplifier including band-pass filters has been realized in a small area of 0.043mm(2) using a 0.25microm CMOS technology.

Smart-Pixel Array Processors Based on Optimal Cellular Neural Networks for Space Sensor Applications

NASA Technical Reports Server (NTRS)

Fang, Wai-Chi; Sheu, Bing J.; Venus, Holger; Sandau, Rainer

1997-01-01

A smart-pixel cellular neural network (CNN) with hardware annealing capability, digitally programmable synaptic weights, and multisensor parallel interface has been under development for advanced space sensor applications. The smart-pixel CNN architecture is a programmable multi-dimensional array of optoelectronic neurons which are locally connected with their local neurons and associated active-pixel sensors. Integration of the neuroprocessor in each processor node of a scalable multiprocessor system offers orders-of-magnitude computing performance enhancements for on-board real-time intelligent multisensor processing and control tasks of advanced small satellites. The smart-pixel CNN operation theory, architecture, design and implementation, and system applications are investigated in detail. The VLSI (Very Large Scale Integration) implementation feasibility was illustrated by a prototype smart-pixel 5x5 neuroprocessor array chip of active dimensions 1380 micron x 746 micron in a 2-micron CMOS technology.

Nucleic acid programmable protein array a just-in-time multiplexed protein expression and purification platform.

PubMed

Qiu, Ji; LaBaer, Joshua

2011-01-01

Systematic study of proteins requires the availability of thousands of proteins in functional format. However, traditional recombinant protein expression and purification methods have many drawbacks for such study at the proteome level. We have developed an innovative in situ protein expression and capture system, namely NAPPA (nucleic acid programmable protein array), where C-terminal tagged proteins are expressed using an in vitro expression system and efficiently captured/purified by antitag antibodies coprinted at each spot. The NAPPA technology presented in this chapter enable researchers to produce and display fresh proteins just in time in a multiplexed high-throughput fashion and utilize them for various downstream biochemical researches of interest. This platform could revolutionize the field of functional proteomics with it ability to produce thousands of spatially separated proteins in high density with narrow dynamic rand of protein concentrations, reproducibly and functionally. Copyright © 2011 Elsevier Inc. All rights reserved.

Special purpose computer system with highly parallel pipelines for flow visualization using holography technology

NASA Astrophysics Data System (ADS)

Masuda, Nobuyuki; Sugie, Takashige; Ito, Tomoyoshi; Tanaka, Shinjiro; Hamada, Yu; Satake, Shin-ichi; Kunugi, Tomoaki; Sato, Kazuho

2010-12-01

We have designed a PC cluster system with special purpose computer boards for visualization of fluid flow using digital holographic particle tracking velocimetry (DHPTV). In this board, there is a Field Programmable Gate Array (FPGA) chip in which is installed a pipeline for calculating the intensity of an object from a hologram by fast Fourier transform (FFT). This cluster system can create 1024 reconstructed images from a 1024×1024-grid hologram in 0.77 s. It is expected that this system will contribute to the analysis of fluid flow using DHPTV.

Therapeutic applications of CRISPR RNA-guided genome editing.

PubMed

Koo, Taeyoung; Kim, Jin-Soo

2017-01-01

The rapid development of programmable nuclease-based genome editing technologies has enabled targeted gene disruption and correction both in vitro and in vivo This revolution opens up the possibility of precise genome editing at target genomic sites to modulate gene function in animals and plants. Among several programmable nucleases, the type II clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated nuclease 9 (Cas9) system has progressed remarkably in recent years, leading to its widespread use in research, medicine and biotechnology. In particular, CRISPR-Cas9 shows highly efficient gene editing activity for therapeutic purposes in systems ranging from patient stem cells to animal models. However, the development of therapeutic approaches and delivery methods remains a great challenge for biomedical applications. Herein, we review therapeutic applications that use the CRISPR-Cas9 system and discuss the possibilities and challenges ahead. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

The Impact of Curriculum Redesign in a Mexican University on Students' Abilities, Attitudes and Values

ERIC Educational Resources Information Center

Greybeck, Barbara; Gomez, Margarita Orozco; Mendoza, Sandra Olarte

2004-01-01

In 1997, the ITESM in Monterrey Mexico initiated a system-wide programme of curriculum reform, bringing about three major changes: (1) a focus on the student in the teaching-learning process; (2) the incorporation of abilities, attitudes and values as an integral part of course content; and (3) the use of a technological platform for every course.…

Workshop 8 (synthesis): challenges of expanding ecological sanitation into urban areas.

PubMed

Milburn, A; Matsui, S; Malmqvist, P A

2002-01-01

After seven papers discussing specific examples of ecological sanitation projects, the workshop considered the background, motivation and feasibility of this technology. It was agreed that ecological sanitation could help tackle water scarcity, health protection and, by recycling water and nutrients into agriculture, food scarcity. Dense cities are probably unsuitable for its implementation, but rural, town and peri-urban areas are promising. Key issues that remains are: the microbiological and chemical risks associated with the technology; the need for major information, education and support programmes; effective linking to reuse schemes; tailoring systems to meet local physical, socio-economic and cultural circumstances.

A Hearing Aid Primer 1

ERIC Educational Resources Information Center

Yetter, Carol J.

2009-01-01

This hearing aid primer is designed to define the differences among the three levels of hearing instrument technology: conventional analog circuit technology (most basic), digitally programmable/analog circuit technology (moderately advanced), and fully digital technology (most advanced). Both moderate and advanced technologies mean that hearing…

Preface

NASA Astrophysics Data System (ADS)

Dascalu, Dan; Muller, Alexandru

2003-07-01

It is a great pleasure for us to introduce this special issue featuring selected papers from the 13th European Micromechanics Workshop, MME'02, organized by the National Institute for R&D in Microtechnologies (IMT Bucharest). The conference was held in the beautiful mountain resort Sinaia, a former Romanian royal residence, 120 km north of Bucharest. In 1989 the first MME workshop was held in Twente, since then it has traveled from one Western European country to another. MME'02 is the first workshop to have been held in Eastern Europe. MEMS consolidated as an exciting field for research and development over the past decade and the MEMS industry is now a substantial presence. Commercial applications of MEMS technology now include pressure, chemical, acceleration, rotation rate sensors, microphones, microdevices in microfluidic systems for bio-engineering, RF switches and fiber optic networks (optical switches), etc. Microtechnology is one of the major growth markets of the 21st century. Microsystems are now key products in information and communication technology, automotive engineering and are also increasing in the fields of chemistry and life sciences. The 6th Framework Programme, already underway, promotes long-term initiatives in this area of research. After reviewing 72 high-quality abstracts submitted for the conference, the programme organizers selected 68 for presentation during the one and half days of the workshop. There were 62 papers from Europe and six papers from outside Europe (USA, Canada and Singapore). The papers covered materials, processing, modeling and applications of micromachining and micromachined devices. Following the tradition of the MME workshops, non-invited papers were discussed at poster sessions after a short oral presentation. This formula was again highly appreciated and stimulated much discussion between scientists. Five invited papers were also presented orally. These invited talks reviewed the latest technological developments in MEMS topics. This year special attention was devoted to the emerging RF MEMS technology. In addition, a presentation of `Microsystems in FP6' was held as a special invited talk at the end of the conference. The selection of papers for inclusion in this issue was difficult, due to the high quality of the papers of the workshop. The final content is a result of the collaboration of the programme committee and Institute of Physics Publishing staff. We wish to thank our colleagues from the MME'02 programme committee: A G R Evans (Southampton University), M Hill (Cork Institute of Technology) and R Wolffenbuttel (Delft University of Technology). We are grateful to all participants for making the workshop a very stimulating meeting place for the MEMS community in Europe.

Applications of Spatial Technology in Schistosomiasis Control Programme in The People's Republic of China.

PubMed

Wang, X-Y; He, J; Yang, K; Liang, S

2016-01-01

Schistosomiasis, as the important parasitic disease, has caused serious threats to human health globally. The People's Republic of China has acquired significant achievements based on large-scale interventions and innovational technology. The spatial technology was introduced in 1980s and widely used in the study and control of schistosomiasis in The People's Republic of China. This chapter reviews the progress and application of spatial technology in schistosomiasis control by analysing the spatiotemporal pattern of and the impact of ecological changes on schistosomiasis transmission, which have provided the information to design and select the control strategy, and assisted the establishment of the monitoring and early warning system in The People's Republic of China, especially in the marshland and mountainous regions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Advanced digital SAR processing study

NASA Technical Reports Server (NTRS)

Martinson, L. W.; Gaffney, B. P.; Liu, B.; Perry, R. P.; Ruvin, A.

1982-01-01

A highly programmable, land based, real time synthetic aperture radar (SAR) processor requiring a processed pixel rate of 2.75 MHz or more in a four look system was designed. Variations in range and azimuth compression, number of looks, range swath, range migration and SR mode were specified. Alternative range and azimuth processing algorithms were examined in conjunction with projected integrated circuit, digital architecture, and software technologies. The advaced digital SAR processor (ADSP) employs an FFT convolver algorithm for both range and azimuth processing in a parallel architecture configuration. Algorithm performace comparisons, design system design, implementation tradeoffs and the results of a supporting survey of integrated circuit and digital architecture technologies are reported. Cost tradeoffs and projections with alternate implementation plans are presented.

The fabrication of a programmable via using phase-change material in CMOS-compatible technology.

PubMed

Chen, Kuan-Neng; Krusin-Elbaum, Lia

2010-04-02

We demonstrate an energy-efficient programmable via concept using indirectly heated phase-change material. This via structure has maximum phase-change volume to achieve a minimum on resistance for high performance logic applications. Process development and material investigations for this device structure are reported. The device concept is successfully demonstrated in a standard CMOS-compatible technology capable of multiple cycles between on/off states for reconfigurable applications.

Software Configurable Multichannel Transceiver

NASA Technical Reports Server (NTRS)

Freudinger, Lawrence C.; Cornelius, Harold; Hickling, Ron; Brooks, Walter

2009-01-01

Emerging test instrumentation and test scenarios increasingly require network communication to manage complexity. Adapting wireless communication infrastructure to accommodate challenging testing needs can benefit from reconfigurable radio technology. A fundamental requirement for a software-definable radio system is independence from carrier frequencies, one of the radio components that to date has seen only limited progress toward programmability. This paper overviews an ongoing project to validate the viability of a promising chipset that performs conversion of radio frequency (RF) signals directly into digital data for the wireless receiver and, for the transmitter, converts digital data into RF signals. The Software Configurable Multichannel Transceiver (SCMT) enables four transmitters and four receivers in a single unit the size of a commodity disk drive, programmable for any frequency band between 1 MHz and 6 GHz.

Hybridity as a process of technology's 'translation': customizing a national Electronic Patient Record.

PubMed

Petrakaki, Dimitra; Klecun, Ela

2015-01-01

This paper explores how national Electronic Patient Record (EPR) systems are customized in local settings and, in particular, how the context of their origin plays out with the context of their use. It shows how representations of healthcare organizations and of local clinical practice are built into EPR systems within a complex context whereby different stakeholder groups negotiate to produce an EPR package that aims to meet both local and generic needs. The paper draws from research into the implementation of the National Care Record Service, a part of the National Programme for Information Technology (NPfIT), in the English National Health Service (NHS). The paper makes two arguments. First, customization of national EPR is a distributed process that involves cycles of 'translation', which span across geographical, cultural and professional boundaries. Second, 'translation' is an inherently political process during which hybrid technology gets consolidated. The paper concludes, that hybrid technology opens up possibilities for standardization of healthcare. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mars Technology Rover with Arm-Mounted Percussive Coring Tool, Microimager, and Sample-Handling Encapsulation Containerization Subsystem

NASA Technical Reports Server (NTRS)

Younse, Paulo J.; Dicicco, Matthew A.; Morgan, Albert R.

2012-01-01

A report describes the PLuto (programmable logic) Mars Technology Rover, a mid-sized FIDO (field integrated design and operations) class rover with six fully drivable and steerable cleated wheels, a rocker-bogey suspension, a pan-tilt mast with panorama and navigation stereo camera pairs, forward and rear stereo hazcam pairs, internal avionics with motor drivers and CPU, and a 5-degrees-of-freedom robotic arm. The technology rover was integrated with an arm-mounted percussive coring tool, microimager, and sample handling encapsulation containerization subsystem (SHEC). The turret of the arm contains a percussive coring drill and microimager. The SHEC sample caching system mounted to the rover body contains coring bits, sample tubes, and sample plugs. The coring activities performed in the field provide valuable data on drilling conditions for NASA tasks developing and studying coring technology. Caching of samples using the SHEC system provide insight to NASA tasks investigating techniques to store core samples in the future.

Multidimensional quantum entanglement with large-scale integrated optics.

PubMed

Wang, Jianwei; Paesani, Stefano; Ding, Yunhong; Santagati, Raffaele; Skrzypczyk, Paul; Salavrakos, Alexia; Tura, Jordi; Augusiak, Remigiusz; Mančinska, Laura; Bacco, Davide; Bonneau, Damien; Silverstone, Joshua W; Gong, Qihuang; Acín, Antonio; Rottwitt, Karsten; Oxenløwe, Leif K; O'Brien, Jeremy L; Laing, Anthony; Thompson, Mark G

2018-04-20

The ability to control multidimensional quantum systems is central to the development of advanced quantum technologies. We demonstrate a multidimensional integrated quantum photonic platform able to generate, control, and analyze high-dimensional entanglement. A programmable bipartite entangled system is realized with dimensions up to 15 × 15 on a large-scale silicon photonics quantum circuit. The device integrates more than 550 photonic components on a single chip, including 16 identical photon-pair sources. We verify the high precision, generality, and controllability of our multidimensional technology, and further exploit these abilities to demonstrate previously unexplored quantum applications, such as quantum randomness expansion and self-testing on multidimensional states. Our work provides an experimental platform for the development of multidimensional quantum technologies. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Synthetic biology engineering of biofilms as nanomaterials factories.

PubMed

Nguyen, Peter Q

2017-06-15

Bottom-up fabrication of nanoscale materials has been a significant focus in materials science for expanding our technological frontiers. This assembly concept, however, is old news to biology - all living organisms fabricate themselves using bottom-up principles through a vast self-organizing system of incredibly complex biomolecules, a marvelous dynamic that we are still attempting to unravel. Can we use what we have gleaned from biology thus far to illuminate alternative strategies for designer nanomaterial manufacturing? In the present review article, new synthetic biology efforts toward using bacterial biofilms as platforms for the synthesis and secretion of programmable nanomaterials are described. Particular focus is given to self-assembling functional amyloids found in bacterial biofilms as re-engineerable modular nanomolecular components. Potential applications and existing challenges for this technology are also explored. This novel approach for repurposing biofilm systems will enable future technologies for using engineered living systems to grow artificial nanomaterials. © 2017 The Author(s); published by Portland Press Limited on behalf of the Biochemical Society.

Design and Implementation of Website Information Disclosure Assessment System

PubMed Central

Cho, Ying-Chiang; Pan, Jen-Yi

2015-01-01

Internet application technologies, such as cloud computing and cloud storage, have increasingly changed people’s lives. Websites contain vast amounts of personal privacy information. In order to protect this information, network security technologies, such as database protection and data encryption, attract many researchers. The most serious problems concerning web vulnerability are e-mail address and network database leakages. These leakages have many causes. For example, malicious users can steal database contents, taking advantage of mistakes made by programmers and administrators. In order to mitigate this type of abuse, a website information disclosure assessment system is proposed in this study. This system utilizes a series of technologies, such as web crawler algorithms, SQL injection attack detection, and web vulnerability mining, to assess a website’s information disclosure. Thirty websites, randomly sampled from the top 50 world colleges, were used to collect leakage information. This testing showed the importance of increasing the security and privacy of website information for academic websites. PMID:25768434

The fully integrated biomedical engineering programme at Eindhoven University of Technology.

PubMed

Slaaf, D W; van Genderen, M H P

2009-05-01

The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a bachelor-master's programme with two different master's degrees: Master's Degree in Biomedical Engineering and Master's Degree in Medical Engineering. Recently, the programme has adopted semester programming, has included a major and minor in the bachelor's degree phase, and a true bachelor's degree final project. Details about the programme and data about where graduates find jobs are provided in this paper.

Industrial platforms--a unique feature of the European Commission's biotechnology R&D programme.

PubMed

Aguilar, A; Ingemansson, T; Hogan, S; Magnien, E

1998-09-01

The European Commission's research, technological development and demonstration programmes aim to strengthen European research and technological development, and to increase the competitiveness of European industries. The creation and development of Industrial Platforms play an important role in these processes by improving the transition from research to commercial application. Industrial Platforms are technology-based industrial groupings established by industry with the aims of enabling the exploitation or dissemination of research results, encouraging academic-industrial collaborations and providing their members with a means of voicing their opinion on present and future research policies.

Audiology in Latin America: hearing impairment, resources and services.

PubMed

Madriz, J J

2001-01-01

Evidence is presented about the limitation of information available on prevalence/incidence of deafness and hearing impairment in the developing world; particularly in Latin America. Two questionnaires on audiological resources and services were mailed to Latin American and Caribbean countries in general and to Central American nations in particular. The information returned by Argentina, Chile, Colombia, Costa Rica, Cuba, Belize, El Salvador, Grenada, Guatemala, Honduras, Mexico, Nicaragua, Panama, Puerto Rico and Uruguay was analysed. Data was gathered about epidemiological studies on hearing impairment, about specific programmes, such as early identification of hearing impairment, national registers on deafness and programmes on hearing screening. Training programmes and availability of professionals in the field of hearing and deafness is also shown. Hearing services, hearing aids provision, hearing testing equipment, professional organization and legislation in audiology is also documented. It is our conclusion that hearing impairment is a low priority for health systems in the developing world, technology continues to be excessively costly and material and human resources are limited, and services are poor and restricted.

The evaluation and use of a portable TEPC system for measuring in-flight exposure to cosmic radiation.

PubMed

Taylor, G C; Bentley, R D; Conroy, T J; Hunter, R; Jones, J B L; Pond, A; Thomas, D J

2002-01-01

A recent EC directive has called for all member states to introduce legislation covering the assessment and restriction of air crew exposure to cosmic radiation. In the UK the Civil Aviation Authority, in conjunction with the Department of the Environment. Transport and the Regions issued guidelines suggesting the use of a predictive code such as CARI for this purpose. In order to validate the use of calculated route doses, an extensive programme of measurements is being carried out on long haul routes in conjunction with Virgin Atlantic Airways, using a prototype HAWK TEPC developed by Far West Technology. This programme began in January 2000 and by the end of February 2001 had resulted in the accumulation of data from 74 flights. In this paper the instrument design is discussed, together with the calibration programme. An overview of the in-flight results is also presented, including comparisons between measurements and calculations, which indicates that CARI under-predicts the route doses by approximately 20%.

NASA Communications Division (NASCOM) Tracking and Data Relay Satellite System (TDRSS) shuttle multiplexer-demultiplexer data system (MDM) and supporting items

NASA Technical Reports Server (NTRS)

New, S. R.

1981-01-01

The multiplexer-demultiplexer (MDM) project included the design, documentation, manufacture, and testing of three MDM Data Systems. The equipment is contained in 59 racks, and includes more than 3,000 circuit boards and 600 microprocessors. Spares, circuit card testers, a master set of programmable integrated circuits, and a program development system were included as deliverables. All three MDM's were installed, and were operationally tested. The systems performed well with no major problems. The progress and problems analysis, addresses schedule conformance, new technology, items awaiting government approval, and project conclusions are summarized. All contract modifications are described.

NASA Communications Division (NASCOM) Tracking and Data Relay Satellite System (TDRSS) shuttle multiplexer-demultiplexer data system (MDM) and supporting items

NASA Astrophysics Data System (ADS)

New, S. R.

1981-06-01

The multiplexer-demultiplexer (MDM) project included the design, documentation, manufacture, and testing of three MDM Data Systems. The equipment is contained in 59 racks, and includes more than 3,000 circuit boards and 600 microprocessors. Spares, circuit card testers, a master set of programmable integrated circuits, and a program development system were included as deliverables. All three MDM's were installed, and were operationally tested. The systems performed well with no major problems. The progress and problems analysis, addresses schedule conformance, new technology, items awaiting government approval, and project conclusions are summarized. All contract modifications are described.

Current and future prospects for CRISPR-based tools in bacteria

PubMed Central

Luo, Michelle L.; Leenay, Ryan T.; Beisel, Chase L.

2015-01-01

CRISPR-Cas systems have rapidly transitioned from intriguing prokaryotic defense systems to powerful and versatile biomolecular tools. This article reviews how these systems have been translated into technologies to manipulate bacterial genetics, physiology, and communities. Recent applications in bacteria have centered on multiplexed genome editing, programmable gene regulation, and sequence-specific antimicrobials, while future applications can build on advances in eukaryotes, the rich natural diversity of CRISPR-Cas systems, and the untapped potential of CRISPR-based DNA acquisition. Overall, these systems have formed the basis of an ever-expanding genetic toolbox and hold tremendous potential for our future understanding and engineering of the bacterial world. PMID:26460902

Community social alarm network in Slovenia.

PubMed

Premik, M; Rudel, D

1996-12-01

The article deals with a case report on the technology transfer of the Lifeline community social alarm system to Slovenia. The main reason the project was initiated is the ageing of the Slovenian population (11% of the population is 65 or over). With this system we intend to support the public's wish to allow the elderly to remain in their own homes for as long as possible instead of placing them in institutional care. Between 1992 and 1995 the following results were achieved: the acceptability of the system in the social environment was increased; a pilot control centre in Ljubljana was established and has been operational for two-and-a-half years; a national dissemination plan was prepared; the integration of the programme into other information systems has been started. One of the main conclusions is that for the successful transfer of a technology which also affects social values in society, a social innovation must support the process.

Performance Simulation & Engineering Analysis/Design and Verification of a Shock Mitigation System for a Rover Landing on Mars

NASA Astrophysics Data System (ADS)

Ullio, Roberto; Gily, Alessandro; Jones, Howard; Geelen, Kelly; Larranaga, Jonan

2014-06-01

In the frame of the ESA Mars Robotic Exploration Preparation (MREP) programme and within its Technology Development Plan [1] the activity "E913- 007MM Shock Mitigation Operating Only at Touch- down by use of minimalist/dispensable Hardware" (SMOOTH) was conducted under the framework of Rover technologies and to support the ESA MREP Mars Precision Lander (MPL) Phase A system study with the objectives to:• study the behaviour of the Sample Fetching Rover (SFR) landing on Mars on its wheels• investigate and implement into the design of the SFR Locomotion Sub-System (LSS) an impact energy absorption system (SMOOTH)• verify by simulation the performances of SMOOTH The main purpose of this paper is to present the obtained numerical simulation results and to explain how these results have been utilized first to iterate on the design of the SMOOTH concept and then to validate its performances.

[Coordinated care after myocardial infarction. The statement of the Polish Cardiac Society and the Agency for Health Technology Assessment and Tariff System].

PubMed

Jankowski, Piotr; Gąsior, Mariusz; Gierlotka, Marek; Cegłowska, Urszula; Słomka, Marta; Eysymontt, Zbigniew; Gałaszek, Michał; Buszman, Piotr; Kalarus, Zbigniew; Kaźmierczak, Jarosław; Legutko, Jacek; Sujkowska, Gabriela; Matusewicz, Wojciech; Opolski, Grzegorz; Hoffman, Piotr

2016-01-01

The in-hospital mortality following myocardial infarction has decreased substantially over the last two decades in Poland. However, according to the available evidence approximately every 10th patient discharged after myocardial infarction (MI) dies during next 12 months. We identified the most important barriers (e.g. insufficient risk factors control, insufficient and delayed cardiac rehabilitation, suboptimal pharmacotherapy, delayed complete myocardial revascularisation) and proposed a new nation-wide system of coordinated care after MI. The system should consist of four modules: complete revascularisation, education and rehabilitation programme, electrotherapy (including ICDs and BiVs when appropriate) and periodical cardiac consultations. At first stage the coordinated care programme should last 12 months. The proposal contains also the quality of care assessment based on clinical measures (e.g. risk factors control, rate of complete myocardial revascularisation, etc.) as well as on the rate of cardiovascular events. The wide implementation of the proposed system is expected to decrease one year mortality after MI and allow for better financial resources allocation in Poland.

The Impact of In-Service Technology Training Programmes on Technology Teachers

ERIC Educational Resources Information Center

Gumbo, Mishack; Makgato, Moses; Muller, Helene

2012-01-01

The aim of this paper is to assess the impact the Advanced Certificate in Education (ACE) in-service technology training program has on technology teachers' knowledge and understanding of technology. The training of technology teachers is an initiative toward teachers' professional development within the mathematics, science, and technology sphere…

Recent advances in the front-end sources of the LMJ fusion laser

NASA Astrophysics Data System (ADS)

Gleyze, Jean-François; Hares, Jonathan; Vidal, Sebastien; Beck, Nicolas; Dubertrand, Jerome; Perrin, Arnaud

2011-03-01

LMJ is typical of lasers used for inertial confinement fusion and requires a laser of programmable parameters for injection into the main amplifier. For several years, the CEA has developed front end fiber sources, based on telecommunications fiber optics technologies. These sources meet the needs but as the technology evolves we can expect improved efficiency and reductions in size and cost. We give an up-to-date description of some present development issues, particularly in the field of temporal shaping with the use of digital system. The synchronization of such electronics has been challenging however we now obtain system jitter of less then 7ps rms. Secondly, we will present recent advance in the use of fiber based pre-comp system to avoid parasitic amplitude modulation from phase modulation used for spectral broadening.

Field-programmable logic devices with optical input-output.

PubMed

Szymanski, T H; Saint-Laurent, M; Tyan, V; Au, A; Supmonchai, B

2000-02-10

A field-programmable logic device (FPLD) with optical I/O is described. FPLD's with optical I/O can have their functionality specified in the field by means of downloading a control-bit stream and can be used in a wide range of applications, such as optical signal processing, optical image processing, and optical interconnects. Our device implements six state-of-the-art dynamically programmable logic arrays (PLA's) on a 2 mm x 2 mm die. The devices were fabricated through the Lucent Technologies-Advanced Research Projects Agency-Consortium for Optical and Optoelectronic Technologies in Computing (Lucent/ARPA/COOP) workshop by use of 0.5-microm complementary metal-oxide semiconductor-self-electro-optic device technology and were delivered in 1998. All devices are fully functional: The electronic data paths have been verified at 200 MHz, and optical tests are pending. The device has been programmed to implement a two-stage optical switching network with six 4 x 4 crossbar switches, which can realize more than 190 x 10(6) unique programmable input-output permutations. The same device scaled to a 2 cm x 2 cm substrate could support as many as 4000 optical I/O and 1 Tbit/s of optical I/O bandwidth and offer fully programmable digital functionality with approximately 110,000 programmable logic gates. The proposed optoelectronic FPLD is also ideally suited to realizing dense, statically reconfigurable crossbar switches. We describe an attractive application area for such devices: a rearrangeable three-stage optical switch for a wide-area-network backbone, switching 1000 traffic streams at the OC-48 data rate and supporting several terabits of traffic.

Perceptions and Impact of Mandatory eLearning for Foundation Trainee Doctors: A Qualitative Evaluation.

PubMed

Brooks, Hannah L; Pontefract, Sarah K; Vallance, Hannah K; Hirsch, Christine A; Hughes, Elizabeth; Ferner, Robin E; Marriott, John F; Coleman, Jamie J

2016-01-01

Junior doctors in the UK must complete various educational components during their two year Foundation training programme. It is important that mandatory learning is informative and engaging. The aim of this study was to evaluate trainee doctors' perceptions of a Technology Enhanced Learning (TEL) programme developed to improve prescribing competency. Focus groups and interviews were conducted at three hospital sites in the West Midlands. Codes, sub-themes and themes were determined using deductive and inductive thematic analysis. Data were collected from 38 Foundation trainee doctors. Results revealed major themes relating to prescribing education, the user experience and user engagement. Key findings included the positive impact of preparedness following undergraduate education on the user experience of the TEL programme at the postgraduate level; the impact of content, structure, and individual learning needs and styles on the user experience; and the impact of motivation and time on engagement. Most trainees engaged with the programme owing to its mandatory nature; however, some trainees also used the programme voluntarily, for example, to acquire knowledge prior to starting a new placement. It is important to ensure that learners are willing to engage with mandatory TEL, and that they have the time and motivation to do so. It is also important to ensure that learners have a positive user experience and that in designing TEL individual differences in learning styles and needs are taken into account. These findings have implications for educators and system developers in the construction and design of mandatory eLearning programmes.

Using generic tool kits to build intelligent systems

NASA Technical Reports Server (NTRS)

Miller, David J.

1994-01-01

The Intelligent Systems and Robots Center at Sandia National Laboratories is developing technologies for the automation of processes associated with environmental remediation and information-driven manufacturing. These technologies, which focus on automated planning and programming and sensor-based and model-based control, are used to build intelligent systems which are able to generate plans of action, program the necessary devices, and use sensors to react to changes in the environment. By automating tasks through the use of programmable devices tied to computer models which are augmented by sensing, requirements for faster, safer, and cheaper systems are being satisfied. However, because of the need for rapid cost-effect prototyping and multi-laboratory teaming, it is also necessary to define a consistent approach to the construction of controllers for such systems. As a result, the Generic Intelligent System Controller (GISC) concept has been developed. This concept promotes the philosophy of producing generic tool kits which can be used and reused to build intelligent control systems.

Biosurveillance Technology: Providing Situational Awareness through Increased Information Sharing

DTIC Science & Technology

2011-09-01

Sri Lanka, there are “separate vertical programmes [sic] to control and monitor malaria , filariasis, leprosy, respiratory diseases, human rabies...Biohazard Detection System CAP Common Alerting Protocol CDC Centers for Disease Control and Prevention CDC HAN Centers for Disease Control and Prevention...LCDHD Preparedness Program running, I always had complete and total faith that you had everything under control and you would excel at every task. To

Application research for 4D technology in flood forecasting and evaluation

NASA Astrophysics Data System (ADS)

Li, Ziwei; Liu, Yutong; Cao, Hongjie

1998-08-01

In order to monitor the region which disaster flood happened frequently in China, satisfy the great need of province governments for high accuracy monitoring and evaluated data for disaster and improve the efficiency for repelling disaster, under the Ninth Five-year National Key Technologies Programme, the method was researched for flood forecasting and evaluation using satellite and aerial remoted sensed image and land monitor data. The effective and practicable flood forecasting and evaluation system was established and DongTing Lake was selected as the test site. Modern Digital photogrammetry, remote sensing and GIS technology was used in this system, the disastrous flood could be forecasted and loss can be evaluated base on '4D' (DEM -- Digital Elevation Model, DOQ -- Digital OrthophotoQuads, DRG -- Digital Raster Graph, DTI -- Digital Thematic Information) disaster background database. The technology of gathering and establishing method for '4D' disaster environment background database, application technology for flood forecasting and evaluation based on '4D' background data and experimental results for DongTing Lake test site were introduced in detail in this paper.

Tritium technology development in EEC laboratories contributions to design goals for NET

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinner, P.; Chazalon, M.; Leger, D.

1988-09-01

An overview is given of the tritium technology activities carried out in the European national laboratories associated with the European Fusion Programme and in the European Joint Research Center. The relationship of these activities to the Next European Torus (NET) design priorities is discussed, and the current status of the research is summarised. Future developments, required for NET, which will be addressed in the definition of the next 5-year programme are also presented.

46 CFR 62.25-25 - Programmable systems and devices.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Programmable systems and devices. 62.25-25 Section 62.25... AUTOMATION General Requirements for All Automated Vital Systems § 62.25-25 Programmable systems and devices. (a) Programmable control or alarm system logic must not be altered after Design Verification testing...

The Effects of an Individualised ICT-Based Music Education Programme on Primary School Students' Musical Competence and Grades

ERIC Educational Resources Information Center

Hernández-Bravo, Juan R.; Cardona-Moltó, M. Cristina; Hernández-Bravo, José A.

2016-01-01

The purpose of this study was to examine the effect of an information and communications technology (ICT)-based individualised music education programme on primary students' musical competence. A 2 × 3 aptitude treatment interaction factorial design was used to assess the impact of the programme as a function of students' musical aptitude (MA)…

Teaching Science and Technology via Online Distance Learning: The Experience of Teaching Biostatistics in an Online Master of Public Health Programme

ERIC Educational Resources Information Center

Gemmell, Isla; Sandars, John; Taylor, Stewart; Reed, Katie

2011-01-01

This paper describes the development and teaching of a biostatistics module within a fully online distance learning Master of Public Health (MPH) programme at the University of Manchester. The MPH programme caters for students from over 40 countries worldwide and all materials are delivered via the Blackboard virtual learning environment. In this…

Like a bridge over troubled water--Opening pathways for integrating social sciences and humanities into nuclear research.

PubMed

Turcanu, Catrinel; Schröder, Jantine; Meskens, Gaston; Perko, Tanja; Rossignol, Nicolas; Carlé, Benny; Hardeman, Frank

2016-03-01

Research on nuclear technologies has been largely driven by a detachment of the 'technical content' from the 'social context'. However, social studies of science and technology--also for the nuclear domain--emphasize that 'the social' and 'the technical' dimensions of technology development are inter-related and co-produced. In an effort to create links between nuclear research and innovation and society in mutually beneficial ways, the Belgian Nuclear Research Centre started fifteen years ago a 'Programme of Integration of Social Aspects into nuclear research' (PISA). In line with broader science-policy agendas (responsible research and innovation and technology assessment), this paper argues that the importance of such programmes is threefold. First, their multi-disciplinary basis and participatory character contribute to a better understanding of the interactions between science, technology and society, in general, and the complexity of nuclear technology assessment in particular. Second, their functioning as (self -)critical policy supportive research with outreach to society is an essential prerequisite for policies aiming at generating societal trust in the context of controversial issues related to nuclear technologies and exposure to ionising radiation. Third, such programmes create an enriching dynamic in the organisation itself, stimulating collective learning and transdisciplinarity. The paper illustrates with concrete examples these claims and concludes by discussing some key challenges that researchers face while engaging in work of this kind. Copyright © 2015 Elsevier Ltd. All rights reserved.

Color Helmet-Mounted Display System for In-Flight Simulation on the RASCAL Research Helicopter

NASA Technical Reports Server (NTRS)

Edwards, Tim; Barnhart, Warren; Sawyer, Kevin; Aiken, Edwin W. (Technical Monitor)

1995-01-01

A high performance color helmet mounted display (HMD) system for in-flight simulation and research has been developed for the Rotorcraft Aircrew Systems Concepts Laboratory (RASCAL). The display system consists of a programmable display generator, a display electronics unit, a head tracker, and the helmet with display optics. The system provides a maximum of 1024 x 1280 resolution, a 4:1 contrast ratio, and a brightness of 1100fL utilizing currently available technologies. This paper describes the major features and components of the system. Also discussed are the measured performance of the system and the design techniques that allowed the development of a full color HMD.

'Well, if the kids can do it, I can do it': older rehabilitation patients' experiences of telerehabilitation.

PubMed

Shulver, Wendy; Killington, Maggie; Morris, Claire; Crotty, Maria

2017-02-01

Although trials continue to emerge supporting the role of telerehabilitation, implementation has been slow. Key users include older people living with disabilities who are frequent users of hospital rehabilitation services but whose voices are rarely heard. It is unclear whether the use of technologies and reduced face-to-face contact is acceptable to these people. We report on a qualitative study of community dwelling participants who had received a home telerehabilitation programme as an alternative to conventional rehabilitation. Thirteen older participants, three spouses and one carer were interviewed. All had participated in an individualized therapy programme, using a combination of face-to-face and video consults with therapists. The programme used 'off-the-shelf' technologies including iPads for videoconferencing and electronic FitBit R devices. Interviews were recorded, transcribed verbatim and analysed using NVivo software. Thematic analysis resulted in five emergent themes: (i) telerehabilitation is convenient; (ii) telerehabilitation promotes motivation and self-awareness; (iii) telerehabilitation fosters positive therapeutic relationships; (iv) mastering technologies used by younger relatives is a valued aspect of telerehabilitation; and (v) Telerehabilitation does not replace traditional face-to-face rehabilitation therapies. Participants found telerehabilitation convenient and motivating, coped well with the technology and developed positive therapeutic relationships. The learning and practice aspects sat well in the context of a rehabilitation programme. The use of commercially available technologies may have contributed to respondents' high levels of acceptability. The perception of telerehabilitation as complementary to in-person care and the expectation of technological support have implications for the implementation and delivery of telerehabilitation services to older people. © 2016 The Authors. Health Expectations published by John Wiley & Sons Ltd.

Lab-on-a-chip technologies for genodermatoses: Recent progress and future perspectives.

PubMed

Hongzhou, Cui; Shuping, Guo; Wenju, Wang; Li, Li; Lulu, Wei; Linjun, Deng; Jingmin, Li; Xiaoli, Ren; Li, Bai

2017-02-01

In recent years, molecular biology has proven to be a great asset in our understanding of mechanisms in genodermatoses. However, bench to bedside translation research lags far behind. Advances in lab-on-a-chip technologies enabled programmable, reconfigurable, and scalable manipulation of a variety of laboratory procedures. Sample preparation, microfluidic reactions, and continuous monitoring systems can be integrated on a small chip. These advantages have attracted attention in various fields of clinical application including diagnosis of inherited skin diseases. This review lists an overview of the underlying genes and mutations and describes prospective application of lab-on-a-chip technologies as solutions to challenges for point-of-care genodematoses diagnosis. Copyright © 2016. Published by Elsevier B.V.

Software Agents Applications Using Real-Time CORBA

NASA Astrophysics Data System (ADS)

Fowell, S.; Ward, R.; Nielsen, M.

This paper describes current projects being performed by SciSys in the area of the use of software agents, built using CORBA middleware, to improve operations within autonomous satellite/ground systems. These concepts have been developed and demonstrated in a series of experiments variously funded by ESA's Technology Flight Opportunity Initiative (TFO) and Leading Edge Technology for SMEs (LET-SME), and the British National Space Centre's (BNSC) National Technology Programme. Some of this earlier work has already been reported in [1]. This paper will address the trends, issues and solutions associated with this software agent architecture concept, together with its implementation using CORBA within an on-board environment, that is to say taking account of its real- time and resource constrained nature.

Italian Polar Metadata System

NASA Astrophysics Data System (ADS)

Longo, S.; Nativi, S.; Leone, C.; Migliorini, S.; Mazari Villanova, L.

2012-04-01

Italian Polar Metadata System C.Leone, S.Longo, S.Migliorini, L.Mazari Villanova, S. Nativi The Italian Antarctic Research Programme (PNRA) is a government initiative funding and coordinating scientific research activities in polar regions. PNRA manages two scientific Stations in Antarctica - Concordia (Dome C), jointly operated with the French Polar Institute "Paul Emile Victor", and Mario Zucchelli (Terra Nova Bay, Southern Victoria Land). In addition National Research Council of Italy (CNR) manages one scientific Station in the Arctic Circle (Ny-Alesund-Svalbard Islands), named Dirigibile Italia. PNRA started in 1985 with the first Italian Expedition in Antarctica. Since then each research group has collected data regarding biology and medicine, geodetic observatory, geophysics, geology, glaciology, physics and atmospheric chemistry, earth-sun relationships and astrophysics, oceanography and marine environment, chemistry contamination, law and geographic science, technology, multi and inter disciplinary researches, autonomously with different formats. In 2010 the Italian Ministry of Research assigned the scientific coordination of the Programme to CNR, which is in charge of the management and sharing of the scientific results carried out in the framework of the PNRA. Therefore, CNR is establishing a new distributed cyber(e)-infrastructure to collect, manage, publish and share polar research results. This is a service-based infrastructure building on Web technologies to implement resources (i.e. data, services and documents) discovery, access and visualization; in addition, semantic-enabled functionalities will be provided. The architecture applies the "System of Systems" principles to build incrementally on the existing systems by supplementing but not supplanting their mandates and governance arrangements. This allows to keep the existing capacities as autonomous as possible. This cyber(e)-infrastructure implements multi-disciplinary interoperability following a Brokering approach and supporting the relevant international standards recognized by European and international standards, including: GEO/GEOSS, INSPIRE and SCAR. The Brokering approach is empowered by a technology developed by CNR, advanced by the FP7 EuroGEOSS project, and recently adopted by the GEOSS Common Infrastructure (GCI).

'Scaling-up is a craft not a science': Catalysing scale-up of health innovations in Ethiopia, India and Nigeria.

PubMed

Spicer, Neil; Bhattacharya, Dipankar; Dimka, Ritgak; Fanta, Feleke; Mangham-Jefferies, Lindsay; Schellenberg, Joanna; Tamire-Woldemariam, Addis; Walt, Gill; Wickremasinghe, Deepthi

2014-11-01

Donors and other development partners commonly introduce innovative practices and technologies to improve health in low and middle income countries. Yet many innovations that are effective in improving health and survival are slow to be translated into policy and implemented at scale. Understanding the factors influencing scale-up is important. We conducted a qualitative study involving 150 semi-structured interviews with government, development partners, civil society organisations and externally funded implementers, professional associations and academic institutions in 2012/13 to explore scale-up of innovative interventions targeting mothers and newborns in Ethiopia, the Indian state of Uttar Pradesh and the six states of northeast Nigeria, which are settings with high burdens of maternal and neonatal mortality. Interviews were analysed using a common analytic framework developed for cross-country comparison and themes were coded using Nvivo. We found that programme implementers across the three settings require multiple steps to catalyse scale-up. Advocating for government to adopt and finance health innovations requires: designing scalable innovations; embedding scale-up in programme design and allocating time and resources; building implementer capacity to catalyse scale-up; adopting effective approaches to advocacy; presenting strong evidence to support government decision making; involving government in programme design; invoking policy champions and networks; strengthening harmonisation among external programmes; aligning innovations with health systems and priorities. Other steps include: supporting government to develop policies and programmes and strengthening health systems and staff; promoting community uptake by involving media, community leaders, mobilisation teams and role models. We conclude that scale-up has no magic bullet solution - implementers must embrace multiple activities, and require substantial support from donors and governments in doing so. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Asthma disease management: a provider's perspective.

PubMed

Abisheganaden, J

2002-07-01

Asthma is a highly prevalent problem in Singapore, with an increasing societal and economic burden. However, asthma is also an eminently treatable condition, with evidence that integrated education-treatment efforts directed at important patient sub-groups can be cost-effective. What is important is a comprehensive and integrated asthma management programme, aimed at reducing the burden of asthma at all levels of the healthcare system, with the long-term goal of improving asthma care cost-effectively. This refers to asthma disease management. Asthma disease management should focus on identifying deficiencies in asthma management across the population diagnosed with the condition and establish a partnership between the patient, provider and the healthcare system to improve the overall quality of asthma care. The framework for implementing such a programme bridges key concepts and programmes that are already in place in the various institutions. These include patient and physician education, the use of clinical practice guidelines, clinical pathways, outcomes management, quality improvement processes, information technology, case management and existing asthma shared-care programmes and resources. In order to significantly reduce asthma morbidity, an integrated approach is required, involving individuals providing asthma care at various levels of care delivery. There is also a need to co-ordinate the efforts of such individuals and institutions involved so that there is good horizontal and vertical integration of care. The disease management approach described is intended to raise the overall standard of asthma care across a spectrum of patients with asthma.

Mapping evidence of interventions and strategies to bridge the gap in the implementation of the prevention of mother-to-child transmission of HIV programme policy in sub-Saharan countries: A scoping review.

PubMed

Ngidi, Wilbroda H; Naidoo, Joanne R; Ncama, Busisiwe P; Luvuno, Zamasomi P B; Mashamba-Thompson, Tivani P

2017-05-29

Prevention of mother-to-child transmission (PMTCT) of HIV is a life-saving public health intervention. Sub-Saharan African (SSA) countries have made significant progress in the programme, but little is known about the strategies used by them to eliminate mother-to-child transmission of HIV. To map evidence of strategies and interventions employed by SSA in bridging the implementation gap in the rapidly changing PMTCT of HIV programme policy. Electronic search of the databases MEDLINE, PubMed and SABINET for articles published in English between 2001 and August 2016. Key words included 'Sub-Saharan African countries', 'implementation strategies', 'interventions to bridge implementation gap', 'prevention of mother-to-child transmission of HIV' and 'closing implementation gap'. Of a total of 743 articles, 25 articles that met the inclusion criteria were included in the study. Manual content analysis resulted in the identification of three categories of strategies: (1) health system (referral systems, integration of services, supportive leadership, systematic quality-improvement approaches that vigorously monitors programme performance); (2) health service delivery (task shifting, networking, shared platform for learning, local capacity building, supportive supervision); as well as (3) community-level strategies (community health workers, technology use - mHealth, family-centred approaches, male involvement, culturally appropriate interventions). There are strategies that exist in SSA countries. Future research should examine multifaceted scientific models to prioritise the highest impact and be evaluated for effectiveness and efficiency.

Microcomputer technology applications: Charger and regulator software for a breadboard programmable power processor

NASA Technical Reports Server (NTRS)

Green, D. M.

1978-01-01

Software programs are described, one which implements a voltage regulation function, and one which implements a charger function with peak-power tracking of its input. The software, written in modular fashion, is intended as a vehicle for further experimentation with the P-3 system. A control teleprinter allows an operator to make parameter modifications to the control algorithm during experiments. The programs require 3K ROM and 2K ram each. User manuals for each system are included as well as a third program for simple I/O control.

The research on electronic commerce security payment system based on set protocol

NASA Astrophysics Data System (ADS)

Guo, Hongliang

2012-04-01

With the rapid development of network technology, online transactions have become more and more common. In this paper, we firstly introduce the principle and the basic principal and technical foundation of SET, and then we analyze the progress of designing a system in the foundation of the procedure of the electronic business based on SET. On this basis, we design a system of the Payment System for Electronic Business. It will not only take on crucial realism signification for large-scale, medium-sized and mini-type corporations, but also provide guide meaning with programmer and design-developer to realize Electronic Commerce (EC).

Mechatronic system design course for undergraduate programmes

NASA Astrophysics Data System (ADS)

Saleem, A.; Tutunji, T.; Al-Sharif, L.

2011-08-01

Technology advancement and human needs have led to integration among many engineering disciplines. Mechatronics engineering is an integrated discipline that focuses on the design and analysis of complete engineering systems. These systems include mechanical, electrical, computer and control subsystems. In this paper, the importance of teaching mechatronic system design to undergraduate engineering students is emphasised. The paper offers the collaborative experience in preparing and delivering the course material for two universities in Jordan. A detailed description of such a course is provided and a case study is presented. The case study used is a final year project, where students applied a six-stage design procedure that is described in the paper.

Programmable Pacemaker

NASA Technical Reports Server (NTRS)

1996-01-01

Released in 1995, the Trilogy cardiac pacemaker is the fourth generation of a unit developed in the 1970s by NASA, Johns Hopkins Applied Physics Laboratory and St. Jude Medical's Cardiac Rhythm Management Division (formerly known as Pacesetter Systems, Inc.). The new system incorporates the company's PDx diagnostic and programming software and a powerful microprocessor that allows more functions to be fully automatic and gives more detailed information on the patient's health and the performance of the pacing systems. The pacemaker incorporates bidirectional telemetry used for space communications for noninvasive communication with the implanted pacemaker, smaller implantable pulse generators from space microminiaturization, and longer-life batteries from technology for spacecraft electrical power systems.

Space Derived Health Aids (Cardiac Pacemaker)

NASA Technical Reports Server (NTRS)

1981-01-01

St. Jude Medical's Cardiac Rhythm Management Division's (formerly known as Pacesetter Systems, Inc.) pacer is a rechargeable cardiac pacemaker that eliminates the recurring need for surgery to implant a new battery. The Programalith is an advanced cardiac pacing system which permits a physician to reprogram a patient's implanted pacemaker without surgery. System consists of a pacemaker, together with a physician's console containing the programmer and a data printer. Signals are transmitted by wireless telemetry. Two-way communications, originating from spacecraft electrical power systems technology, allows physician to interrogate the pacemaker as to the status of the heart, then to fine tune the device to best suit the patient's needs.

A 50Mbit/Sec. CMOS Video Linestore System

NASA Astrophysics Data System (ADS)

Jeung, Yeun C.

1988-10-01

This paper reports the architecture, design and test results of a CMOS single chip programmable video linestore system which has 16-bit data words with 1024 bit depth. The delay is fully programmable from 9 to 1033 samples by a 10 bit binary control word. The large 16 bit data word width makes the chip useful for a wide variety of digital video signal processing applications such as DPCM coding, High-Definition TV, and Video scramblers/descramblers etc. For those applications, the conventional large fixed-length shift register or static RAM scheme is not very popular because of its lack of versatility, high power consumption, and required support circuitry. The very high throughput of 50Mbit/sec is made possible by a highly parallel, pipelined dynamic memory architecture implemented in a 2-um N-well CMOS technology. The basic cell of the programmable video linestore chip is an four transistor dynamic RAM element. This cell comprises the majority of the chip's real estate, consumes no static power, and gives good noise immunity to the simply designed sense amplifier. The chip design was done using Bellcore's version of the MULGA virtual grid symbolic layout system. The chip contains approximately 90,000 transistors in an area of 6.5 x 7.5 square mm and the I/Os are TTL compatible. The chip is packaged in a 68-pin leadless ceramic chip carrier package.

MRI safety of a programmable shunt assistant at 3 and 7 Tesla.

PubMed

Mirzayan, M Javad; Klinge, Petra M; Samii, Madjid; Goetz, Friedrich; Krauss, Joachim K

2012-06-01

Several new shunt technologies have been developed to optimize hydrocephalus treatment within the past few years. Overdrainage, however, still remains an unresolved problem. One new technology which may reduce the frequency of this complication is the use of a programmable shunt assistant (proSA). Inactive in a horizontal position, it impedes CSF flow in a vertical position according to a prescribed pressure level ranging from 0 to 40 cm H(2)O. We exposed the proSA valve in an ex vivo protocol to MR systems operating at 3 and 7 Tesla to investigate its MRI safety. Following 3 Tesla exposure, no changes in valve settings were noted. Adjustment to any pressure level was possible thereafter. The mean deflection angle was 23 ± 3°. After exposure to 7 Tesla, however, there were unintended pressure changes, and the mechanism for further adjustment of the valves even disintegrated. According to the results of this study, proSA is safe with heteropolar vertical magnet alignment at 3 Tesla. Following 7 Tesla exposure, the valves lost their functional capability.

The measurement programme at the neutron time-of-flight facility n_TOF at CERN

NASA Astrophysics Data System (ADS)

Gunsing, F.; Aberle, O.; Andrzejewski, J.; Audouin, L.; Bécares, V.; Bacak, M.; Balibrea-Correa, J.; Barbagallo, M.; Barros, S.; Bečvář, F.; Beinrucker, C.; Belloni, F.; Berthoumieux, E.; Billowes, J.; Bosnar, D.; Brown, A.; Brugger, M.; Caamaño, M.; Calviño, F.; Calviani, M.; Cano-Ott, D.; Cardella, R.; Casanovas, A.; Castelluccio, D. M.; Cerutti, F.; Chen, Y. H.; Chiaveri, E.; Colonna, N.; Cortés-Giraldo, M. A.; Cortés, G.; Cosentino, L.; Damone, L. A.; Deo, K.; Diakaki, M.; Domingo-Pardo, C.; Dressler, R.; Dupont, E.; Durán, I.; Fernández-Domínguez, B.; Ferrari, A.; Ferreira, P.; Finocchiaro, P.; Frost, R. J. W.; Furman, V.; Ganesan, S.; García, A. R.; Gawlik, A.; Gheorghe, I.; Gilardoni, S.; Glodariu, T.; Gonçalves, I. F.; González, E.; Goverdovski, A.; Griesmayer, E.; Guerrero, C.; Göbel, K.; Harada, H.; Heftrich, T.; Heinitz, S.; Hernández-Prieto, A.; Heyse, J.; Jenkins, D. G.; Jericha, E.; Käppeler, F.; Kadi, Y.; Kalamara, A.; Katabuchi, T.; Kavrigin, P.; Ketlerov, V.; Khryachkov, V.; Kimura, A.; Kivel, N.; Kokkoris, M.; Krtička, M.; Kurtulgil, D.; Leal-Cidoncha, E.; Lederer, C.; Leeb, H.; Lerendegui, J.; Licata, M.; Meo, S. Lo; Lonsdale, S. J.; Losito, R.; Macina, D.; Marganiec, J.; Martínez, T.; Masi, A.; Massimi, C.; Mastinu, P.; Mastromarco, M.; Matteucci, F.; Maugeri, E. A.; Mazzone, A.; Mendoza, E.; Mengoni, A.; Milazzo, P. M.; Mingrone, F.; Mirea, M.; Montesano, S.; Musumarra, A.; Nolte, R.; Negret, A.; Oprea, A.; Palomo-Pinto, F. R.; Paradela, C.; Patronis, N.; Pavlik, A.; Perkowski, J.; Porras, I.; Praena, J.; Quesada, J. M.; Radeck, D.; Rajeev, K.; Rauscher, T.; Reifarth, R.; Riego-Perez, A.; Robles, M.; Rout, P.; Rubbia, C.; Ryan, J. A.; Sabaté-Gilarte, M.; Saxena, A.; Schillebeeckx, P.; Schmidt, S.; Schumann, D.; Sedyshev, P.; Smith, A. G.; Sosnin, N. V.; Stamatopoulos, A.; Suryanarayana, S. V.; Tagliente, G.; Tain, J. L.; Tarifeño-Saldivia, A.; Tarrío, D.; Tassan-Got, L.; Tsinganis, A.; Valenta, S.; Vannini, G.; Variale, V.; Vaz, P.; Ventura, A.; Vlachoudis, V.; Vlastou, R.; Wallner, A.; Warren, S.; Weigand, M.; Weiss, C.; Wolf, C.; Woods, P. J.; Wright, T.; Žugec, P.

2017-09-01

Neutron-induced reaction cross sections are important for a wide variety of research fields ranging from the study of nuclear level densities, nucleosynthesis to applications of nuclear technology like design, and criticality and safety assessment of existing and future nuclear reactors, radiation dosimetry, medical applications, nuclear waste transmutation, accelerator-driven systems and fuel cycle investigations. Simulations and calculations of nuclear technology applications largely rely on evaluated nuclear data libraries. The evaluations in these libraries are based both on experimental data and theoretical models. CERN's neutron time-of-flight facility n_TOF has produced a considerable amount of experimental data since it has become fully operational with the start of its scientific measurement programme in 2001. While for a long period a single measurement station (EAR1) located at 185 m from the neutron production target was available, the construction of a second beam line at 20 m (EAR2) in 2014 has substantially increased the measurement capabilities of the facility. An outline of the experimental nuclear data activities at n_TOF will be presented.

Back-end of the fuel cycle - Indian scenario

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wattal, P.K.

Nuclear power has a key role in meeting the energy demands of India. This can be sustained by ensuring robust technology for the back end of the fuel cycle. Considering the modest indigenous resources of U and a huge Th reserve, India has adopted a three stage Nuclear Power Programme (NPP) based on 'closed fuel cycle' approach. This option on 'Recovery and Recycle' serves twin objectives of ensuring adequate supply of nuclear fuel and also reducing the long term radio-toxicity of the wastes. Reprocessing of the spent fuel by Purex process is currently employed. High Level Liquid Waste (HLW) generatedmore » during reprocessing is vitrified and undergoes interim storage. Back-end technologies are constantly modified to address waste volume minimization and radio-toxicity reduction. Long-term management of HLW in Indian context would involve partitioning of long lived minor actinides and recovery of valuable fission products specifically cesium. Recovery of minor actinides from HLW and its recycle is highly desirable for the sustained growth of India's NPPs. In this context, programme for developing and deploying partitioning technologies on industrial scale is pursued. The partitioned elements could be either transmuted in Fast Reactors (FRs)/Accelerated Driven Systems (ADS) as an integral part of sustainable Indian NPP. (authors)« less

The use of technology enhanced learning in health research capacity development: lessons from a cross country research partnership.

PubMed

Byrne, E; Donaldson, L; Manda-Taylor, L; Brugha, R; Matthews, A; MacDonald, S; Mwapasa, V; Petersen, M; Walsh, A

2016-05-10

With the recognition of the need for research capacity strengthening for advancing health and development, this research capacity article explores the use of technology enhanced learning in the delivery of a collaborative postgraduate blended Master's degree in Malawi. Two research questions are addressed: (i) Can technology enhanced learning be used to develop health research capacity?, and: (ii) How can learning content be designed that is transferrable across different contexts? An explanatory sequential mixed methods design was adopted for the evaluation of technology enhanced learning in the Masters programme. A number of online surveys were administered, student participation in online activities monitored and an independent evaluation of the programme conducted. Remote collaboration and engagement are paramount in the design of a blended learning programme and support was needed for selecting the most appropriate technical tools. Internet access proved problematic despite developing the content around low bandwidth availability and training was required for students and teachers/trainers on the tools used. Varying degrees of engagement with the tools used was recorded, and the support of a learning technologist was needed to navigate through challenges faced. Capacity can be built in health research through blended learning programmes. In relation to transferability, the support required institutionally for technology enhanced learning needs to be conceptualised differently from support for face-to-face teaching. Additionally, differences in pedagogical approaches and styles between institutions, as well as existing social norms and values around communication, need to be embedded in the content development if the material is to be used beyond the pilot resource-intensive phase of a project.

FAO UN-REDD- INPE Joint Programme on Forest Monitoring Systems based on RS and GIS techniques

NASA Astrophysics Data System (ADS)

Jonckheere, I. G.; FAO UN-REDD MRV Team

2010-12-01

Capacity Development and Training for National Forest Monitoring Systems for Reducing Emissions from Deforestation and Forest Degradation in Developing Countries (REDD+) REDD+, which stands for ’Reducing Emissions from Deforestation and Forest Degradation in Developing Countries’ - is an effort to create a financial value for the carbon stored in forests, offering incentives for developing countries to reduce emissions from forested lands and invest in low-carbon paths to sustainable development. The UN-REDD Programme, a collaborative partnership between FAO, UNDP and UNEP launched in September 2008, supports countries to develop capacity to REDD+ and to implement a future REDD+ mechanism in a post-2012 climate regime. The programme works at both the national and global scale, through support mechanisms for country-driven REDD strategies and international consensus-building on REDD+ processes. The UN-REDD Programme gathers technical teams from around the world to develop common approaches, analyses and guidelines on issues such as measurement, reporting and verification (MRV) of carbon emissions and flows, remote sensing, and greenhouse gas inventories. Within the partnership, FAO supports countries on technical issues related to forestry and the development of cost effective and credible MRV processes for emission reductions. While at the international level, it fosters improved guidance on MRV approaches, including consensus on principles and guidelines for MRV and training programmes. It provides guidance on how best to design and implement REDD+, to ensure that forests continue to provide multiple benefits for livelihoods and biodiversity to societies while storing carbon at the same time. Other areas of work include national forest assessments and monitoring of in-country policy and institutional change. FAO and INPE (Brazilian Space Agency) have joint forces through a MoU signed last year in Copenhagen. A major joint programme has been agreed upon to set up national forest satellite monitoring systems in the developing countries and to train them in order to get them ready for REDD+. The outcomes about the role of satellite remote sensing technologies as a tool for monitoring, assessment, reporting and verification of carbon credits and co-benefits under the REDD+ mechanism are here presented.

FPGA-Based X-Ray Detection and Measurement for an X-Ray Polarimeter

NASA Technical Reports Server (NTRS)

Gregory, Kyle; Hill, Joanne; Black, Kevin; Baumgartner, Wayne

2013-01-01

This technology enables detection and measurement of x-rays in an x-ray polarimeter using a field-programmable gate array (FPGA). The technology was developed for the Gravitational and Extreme Magnetism Small Explorer (GEMS) mission. It performs precision energy and timing measurements, as well as rejection of non-x-ray events. It enables the GEMS polarimeter to detect precisely when an event has taken place so that additional measurements can be made. The technology also enables this function to be performed in an FPGA using limited resources so that mass and power can be minimized while reliability for a space application is maximized and precise real-time operation is achieved. This design requires a low-noise, charge-sensitive preamplifier; a highspeed analog to digital converter (ADC); and an x-ray detector with a cathode terminal. It functions by computing a sum of differences for time-samples whose difference exceeds a programmable threshold. A state machine advances through states as a programmable number of consecutive samples exceeds or fails to exceed this threshold. The pulse height is recorded as the accumulated sum. The track length is also measured based on the time from the start to the end of accumulation. For track lengths longer than a certain length, the algorithm estimates the barycenter of charge deposit by comparing the accumulator value at the midpoint to the final accumulator value. The design also employs a number of techniques for rejecting background events. This innovation enables the function to be performed in space where it can operate autonomously with a rapid response time. This implementation combines advantages of computing system-based approaches with those of pure analog approaches. The result is an implementation that is highly reliable, performs in real-time, rejects background events, and consumes minimal power.

Impact assessment of Iran's health technology assessment programme.

PubMed

Yazdizadeh, Bahareh; Mohtasham, Farideh; Velayati, Ashraf

2018-02-22

Following approximately 10 years from the beginning of Iran's national Health Technology Assessment (HTA) programme, the present study aims to evaluate its success by examining the impact of HTA and identifying the determinant factors leading to the implementation of HTA report results. The triangulation method was employed herein. HTA reports were initially identified and their impact and determinant factors were then examined from the perspectives of both researchers (by preparing a questionnaire according to the Payback model and sending it to HTA principle investigators) and stakeholders (semi-structured interviews held with each HTA stakeholder). Simultaneously, the quality of the HTA reports was examined with relevant critical appraisal checklists. The impact of 19 equipment technologies and four pharmaceutical technologies were assessed in this study. Twenty researchers replied (response rate, 86.96%) to the questionnaire on the impact of HTA reports from the researcher's perspective. To assess the impact of HTA reports from the stakeholder's perspective, seven policy-makers were chosen and interviewed as the main target audience. The most common step taken to disseminate the results of the HTA projects was publication. Conducting the HTA had taught researchers and their colleagues' new skills and had facilitated the securing of research grants from other organisations. Most reports had used the systematic review method but the relevant details had been scarcely presented regarding outcomes, costs and analysis. The greatest impact of HTA reports on decision-making had been on policy-makers providing and allocating finances. Barriers in stewardship, identification and prioritisation of topics, performance and dissemination of HTA results were the main barriers of implementing HTAs. In most aspects, the status of HTA impact reports need improvement. Thus far, the barriers and facilitators of the HTA programme in Iran have been investigated in other studies. These findings should be pooled to reach a solution that can be actively applied to the health system to improve the status quo of HTA in Iran.

15 CFR 740.7 - Computers (APP).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 4A003. (2) Technology and software. License Exception APP authorizes exports of technology and software... programmability. (ii) Technology and source code. Technology and source code eligible for License Exception APP..., reexports and transfers (in-country) for nuclear, chemical, biological, or missile end-users and end-uses...

[Genome editing ~Principle and possibility of a novel genetic engineering technology. Basic principles of genome editing.

PubMed

Yamamoto, Takashi

Programmable site-specific nuclease mediated-genome editing is an emerging biotechnology for precise manipulation of target genes. In genome editing, gene-knockout as well as gene-knockin are possible in various organisms and cultured cells. CRISPR-Cas9, which was developed in 2012, is a convenient and efficient programmable site-specific nuclease and the use spreads around the world rapidly. For this, it is important for the progress of life science research to introduce the genome editing technology.

Reconfigurable Transceiver and Software-Defined Radio Architecture and Technology Evaluated for NASA Space Communications

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Kacpura, Thomas J.

2004-01-01

The NASA Glenn Research Center is investigating the development and suitability of a software-based open-architecture for space-based reconfigurable transceivers (RTs) and software-defined radios (SDRs). The main objectives of this project are to enable advanced operations and reduce mission costs. SDRs are becoming more common because of the capabilities of reconfigurable digital signal processing technologies such as field programmable gate arrays and digital signal processors, which place radio functions in firmware and software that were traditionally performed with analog hardware components. Features of interest of this communications architecture include nonproprietary open standards and application programming interfaces to enable software reuse and portability, independent hardware and software development, and hardware and software functional separation. The goals for RT and SDR technologies for NASA space missions include prelaunch and on-orbit frequency and waveform reconfigurability and programmability, high data rate capability, and overall communications and processing flexibility. These operational advances over current state-of-art transceivers will be provided to reduce the power, mass, and cost of RTs and SDRs for space communications. The open architecture for NASA communications will support existing (legacy) communications needs and capabilities while providing a path to more capable, advanced waveform development and mission concepts (e.g., ad hoc constellations with self-healing networks and high-rate science data return). A study was completed to assess the state of the art in RT architectures, implementations, and technologies. In-house researchers conducted literature searches and analysis, interviewed Government and industry contacts, and solicited information and white papers from industry on space-qualifiable RTs and SDRs and their associated technologies for space-based NASA applications. The white papers were evaluated, compiled, and used to assess RT and SDR system architectures and core technology elements to determine an appropriate investment strategy to advance these technologies to meet future mission needs. The use of these radios in the space environment represents a challenge because of the space radiation suitability of the components, which drastically reduces the processing capability. The radios available for space are considered to be RTs (as opposed to SDRs), which are digitally programmable radios with selectable changes from an architecture combining analog and digital components. The limited flexibility of this design contrasts against the desire to have a power-efficient solution and open architecture.

Progress and Achievements at the Mid Term of the Dragon 3 Programme

NASA Astrophysics Data System (ADS)

Desnos, Yves-Louis; Li, Zengyuan; Zmuda, Andy; Gao, Zhihai

2014-11-01

The Dragon Programme is a joint undertaking between ESA and the Ministry of Science and Technology (MOST) of China and the National Remote Sensing Center of China (NRSCC). Its purpose is to encourage increased exploitation of ESA and Chinese space resources within China as well as stimulate increased scientific cooperation in the field of Earth Observation (EO) science and applications between China and Europe. Since 2004, this pioneering programme has become a model for scientific and technological cooperation between China and Europe. By successfully encouraging joint research using ESA, Third Party Missions and Chinese EO data across a range of thematic areas, Dragon continues to deliver outstanding scientific results. The programme has successfully completed two phases, Dragon 1 from 2004 to 2008, Dragon 2 from 2008 to 2012. The third phase of Dragon was started in 2012 and will be completed in 2016. The Dragon 3 project teams are led by leading EO scientists and young scientists are also engaged on the projects. Advanced training in land, ocean and atmospheric applications is a feature of the programme and a course on land and one course on ocean applications have been successfully held in 2012 and 2013 in China. Here-in provided is an overview of the results, reporting and training activities at the mid-term stage of the programme.

Prevention and management of non-communicable disease: the IOC consensus statement, Lausanne 2013.

PubMed

Matheson, Gordon O; Klügl, Martin; Engebretsen, Lars; Bendiksen, Fredrik; Blair, Steven N; Börjesson, Mats; Budgett, Richard; Derman, Wayne; Erdener, Ugur; Ioannidis, John P A; Khan, Karim M; Martinez, Rodrigo; Van Mechelen, Willem; Mountjoy, Margo; Sallis, Robert E; Schwellnus, Martin; Shultz, Rebecca; Soligard, Torbjørn; Steffen, Kathrin; Sundberg, Carl Johan; Weiler, Richard; Ljungqvist, Arne

2013-11-01

Morbidity and mortality from preventable, non-communicable chronic disease (NCD) threatens the health of our populations and our economies. The accumulation of vast amounts of scientific knowledge has done little to change this. New and innovative thinking is essential to foster new creative approaches that leverage and integrate evidence through the support of big data, technology and design thinking. The purpose of this paper is to summarise the results of a consensus meeting on NCD prevention sponsored by the IOC in April 2013. Within the context of advocacy for multifaceted systems change, the IOC's focus is to create solutions that gain traction within healthcare systems. The group of participants attending the meeting achieved consensus on a strategy for the prevention and management of chronic disease that includes the following: (1) Focus on behavioural change as the core component of all clinical programmes for the prevention and management of chronic disease. (2) Establish actual centres to design, implement, study and improve preventive programmes for chronic disease. (3) Use human-centred design in the creation of prevention programmes with an inclination to action, rapid prototyping and multiple iterations. (4) Extend the knowledge and skills of Sports and Exercise Medicine (SEM) professionals to build new programmes for the prevention and treatment of chronic disease focused on physical activity, diet and lifestyle. (5) Mobilise resources and leverage networks to scale and distribute programmes of prevention. True innovation lies in the ability to align thinking around these core strategies to ensure successful implementation of NCD prevention and management programmes within healthcare. The IOC and SEM community are in an ideal position to lead this disruptive change. The outcome of the consensus meeting was the creation of the IOC Non-Communicable Diseases ad hoc Working Group charged with the responsibility of moving this agenda forward.

As technology and generations in medical education change, what remains is the intersection between educator, learners, assessment and context.

PubMed

Azzam, Amin

2013-06-01

The information era has begun to create major shifts in educational systems, including those in undergraduate medical and graduate psychiatric training programmes. Despite these changes, teaching and learning in formal educational settings remains predominately the product of the intersection between educator, learners, assessment and context. This article reviews intrinsic and external forces influencing each of these elements, such as intergenerational differences in teaching and learning styles, education technologies as they relate to delivery and maintenance of curricula, competency frameworks of assessment, and individual learning and teaching development plans. Maintaining a focus on the relationship between these factors and re-conceptualizing psychiatric education and formal medical education systems in general as a mutual two-way learning exchange between participants will promote careers of lifelong learning.

Developments of FPGA-based digital back-ends for low frequency antenna arrays at Medicina radio telescopes

NASA Astrophysics Data System (ADS)

Naldi, G.; Bartolini, M.; Mattana, A.; Pupillo, G.; Hickish, J.; Foster, G.; Bianchi, G.; Lingua, A.; Monari, J.; Montebugnoli, S.; Perini, F.; Rusticelli, S.; Schiaffino, M.; Virone, G.; Zarb Adami, K.

In radio astronomy Field Programmable Gate Array (FPGA) technology is largely used for the implementation of digital signal processing techniques applied to antenna arrays. This is mainly due to the good trade-off among computing resources, power consumption and cost offered by FPGA chip compared to other technologies like ASIC, GPU and CPU. In the last years several digital backend systems based on such devices have been developed at the Medicina radio astronomical station (INAF-IRA, Bologna, Italy). Instruments like FX correlator, direct imager, beamformer, multi-beam system have been successfully designed and realized on CASPER (Collaboration for Astronomy Signal Processing and Electronics Research, https://casper.berkeley.edu) processing boards. In this paper we present the gained experience in this kind of applications.

The Legacy of the Microelectronics Education Programme.

ERIC Educational Resources Information Center

Thorne, Michael

1987-01-01

Describes the Microelectronics Education Programme (MEP), a plan developed to help British secondary school students learn about microcomputers and the role of technology in society, and its successor, the Microelectronics Support Unit (MESU). Highlights include curriculum development, teacher training, computer assisted instruction and the…

BLSS, a European approach to CELSS

NASA Technical Reports Server (NTRS)

Skoog, A. I.

1986-01-01

Several studies have revealed the benefits of a biological life support system (BLSS) in space stations. Problem areas requiring experimental and analytical investigations necessary for the development of BLSS have been identified. The nature of these problems allows for the classification into near-term (prepilot) and long-term (pilot) studies, and into terrestrial and space research programmes. The knowledge of planned European and U.S. space experiments allows for a coordination with existing Spacelab and Shuttle programmes to avoid duplication of research efforts. The Japanese also plan biological experiments on Spacelab in 1988. Coordinating efforts should provide answers to certain BLSS relevant questions. Major areas which need immediate attention are: micorgravity effects; cosmic radiation effects; use of PAR-radiation and high energy particle radiation protection; and monitoring and control (including sensor technology).

Demonstration of a high speed hybrid electrical and optical sensing system for next generation launcher applications

NASA Astrophysics Data System (ADS)

Ibrahim, Selwan K.; O'Dowd, John A.; Honniball, Arthur; Bessler, Vivian; Farnan, Martin; O'Connor, Peter; Melicher, Milos; Gleeson, Danny

2017-09-01

The Future Launchers Preparatory Programme (FLPP) supported by the European Space Agency (ESA) has a goal of developing various launch vehicle system concepts and identifying the technologies required for the design of Europe's Next-Generation Launcher (NGL) while maintaining competitiveness on the commercial market. Avionics fiber optic sensing technology was investigated as part of the FLPP programme. Here we demonstrate and evaluate a high speed hybrid electrical/optical data acquisition system based on commercial off the shelf (COTS) technology capable of acquiring data from traditional electrical sensors and optical Fibre Bragg Grating (FBG) sensors. The proposed system consists of the KAM-500 data acquisition system developed by Curtis-Wright and the I4 tunable laser based fiber optic sensor interrogator developed by FAZ Technology. The key objective was to demonstrate the capability of the hybrid system to acquire data from traditional electrical sensors used in launcher applications e.g. strain, temperature and pressure in combination with optical FBG sensors, as well as data delivery to spacecraft avionics systems. The KAM-500 was configured as the main acquisition unit (MAU) and provided a 1 kHz sampling clock to the I4 interrogator that was configured as the secondary acquisition unit (SAU) to synchronize the data acquisition sample rate between both systems. The SAU acquired data from an array of optical FBG sensors, while the MAU data acquisition system acquired data from the electrical sensors. Data acquired from the optical sensors was processed by the FAZ I4 interrogation system and then encapsulated into UDP/IP packets and transferred to the KAM-500. The KAM-500 encapsulated the optical sensor data together with the data acquired from electrical sensors and transmitted the data over MIL-STD-1553 and Ethernet data interface. The temperature measurements resulted in the optical and electrical sensors performing on a par with each other, with all sensors recording an accuracy within 0.35% FS over the full temperature range of -70°C to +180°C. The pressure measurements were performed over a 0 to 5 bar absolute pressure range and over different temperatures across a -40°C to +80°C range. The tests concluded that the optical pressure sensors performed on par with the electrical pressure sensor for each temperature set, where both sensor technologies measured a pressure accuracy of 1.2% FS. As for the strain measurements, the results show the optical and electrical sensors can measure to within 1% FS (Full Scale) of measurement range +/-1,200 μstrain. The proposed hybrid system can be potentially used for next generation launcher applications delivering weight reduction, improvement in measurement coverage and reduction in Assembly, Integration and Testing (AIT) over traditional electrical systems.

Qualification of silicon pore optics

NASA Astrophysics Data System (ADS)

Wille, Eric; Bavdaz, Marcos; Fransen, Sebastiaan; Collon, Maximilien; Ackermann, Marcelo; Guenther, Ramses; Chatbi, Abdelhakim; Vacanti, Giuseppe; Vervest, Mark; van Baren, Coen; Haneveld, Jeroen; Riekerink, Mark Olde; Koelewijn, Arenda; Kampf, Dirk; Zuknik, Karl-Heinz; Reutlinger, Arnd

2014-07-01

Silicon Pore Optics (SPO) are the enabling technology for ESA's second large class mission in the Cosmic Vision programme. As for every space hardware, a critical qualification process is required to verify the suitability of the SPO mirror modules surviving the launch loads and maintaining their performance in the space environment. We present recent design modifications to further strengthen the mounting system (brackets and dowel pins) against mechanical loads. The progress of a formal qualification test campaign with the new mirror module design is shown. We discuss mechanical and thermal limitations of the SPO technology and provide recommendations for the mission design of the next X-ray Space Observatory.

Nanoelectronic programmable synapses based on phase change materials for brain-inspired computing.

PubMed

Kuzum, Duygu; Jeyasingh, Rakesh G D; Lee, Byoungil; Wong, H-S Philip

2012-05-09

Brain-inspired computing is an emerging field, which aims to extend the capabilities of information technology beyond digital logic. A compact nanoscale device, emulating biological synapses, is needed as the building block for brain-like computational systems. Here, we report a new nanoscale electronic synapse based on technologically mature phase change materials employed in optical data storage and nonvolatile memory applications. We utilize continuous resistance transitions in phase change materials to mimic the analog nature of biological synapses, enabling the implementation of a synaptic learning rule. We demonstrate different forms of spike-timing-dependent plasticity using the same nanoscale synapse with picojoule level energy consumption.

Communications satellite business ventures - Measuring the impact of technology programmes and related policies

NASA Technical Reports Server (NTRS)

Greenberg, J. S.

1986-01-01

An economic evaluation and planning procedure which assesses the effects of various policies on fixed satellite business ventures is described. The procedure is based on a stochastic financial simulation model, the Domsat II, which evaluates spacecraft reliability, market performance, and cost uncertainties. The application of the Domsat II model to the assessment of NASA's ion thrusters for on-orbit propulsion and GaAs solar cell technology is discussed. The effects of insurance rates and the self-insurance option on the financial performance of communication satellite business ventures are investigated. The selection of a transportation system for placing the satellites into GEO is analyzed.

Programmable wide field spectrograph for earth observation

NASA Astrophysics Data System (ADS)

Zamkotsian, Frédéric; Lanzoni, Patrick; Liotard, Arnaud; Viard, Thierry; Costes, Vincent; Hébert, Philippe-Jean

2017-11-01

In Earth Observation, Universe Observation and Planet Exploration, scientific return of the instruments must be optimized in future missions. Micro-Opto-Electro-Mechanical Systems (MOEMS) could be key components in future generation of space instruments. These devices are based on the mature micro-electronics technology and in addition to their compactness, scalability, and specific task customization, they could generate new functions not available with current technologies. French and European space agencies, the Centre National d'Etudes Spatiales (CNES) and the European Space Agency (ESA) have initiated several studies with LAM and TAS for listing the new functions associated with several types of MEMS, and developing new ideas of instruments.

Evolution of eumetazoan nervous systems: insights from cnidarians.

PubMed

Kelava, Iva; Rentzsch, Fabian; Technau, Ulrich

2015-12-19

Cnidarians, the sister group to bilaterians, have a simple diffuse nervous system. This morphological simplicity and their phylogenetic position make them a crucial group in the study of the evolution of the nervous system. The development of their nervous systems is of particular interest, as by uncovering the genetic programme that underlies it, and comparing it with the bilaterian developmental programme, it is possible to make assumptions about the genes and processes involved in the development of ancestral nervous systems. Recent advances in sequencing methods, genetic interference techniques and transgenic technology have enabled us to get a first glimpse into the molecular network underlying the development of a cnidarian nervous system-in particular the nervous system of the anthozoan Nematostella vectensis. It appears that much of the genetic network of the nervous system development is partly conserved between cnidarians and bilaterians, with Wnt and bone morphogenetic protein (BMP) signalling, and Sox genes playing a crucial part in the differentiation of neurons. However, cnidarians possess some specific characteristics, and further studies are necessary to elucidate the full regulatory network. The work on cnidarian neurogenesis further accentuates the need to study non-model organisms in order to gain insights into processes that shaped present-day lineages during the course of evolution. © 2015 The Authors.

Exploring physical activity behaviour - needs for and interest in a technology-delivered, home-based exercise programme among patients with intermittent claudication.

PubMed

Cornelis, Nils; Buys, Roselien; Fourneau, Inge; Dewit, Tijl; Cornelissen, Véronique

2018-02-01

Supervised walking is a first line therapy in peripheral arterial disease (PAD) with complaints of intermittent claudication. However, uptake of supervised programmes is low. Home-based exercise seems an appealing alternative; especially since technological advances, such as tele-coaching and tele-monitoring, may facilitate the process and support patients when adopting a physically active lifestyle. To guide the development of such an intervention, it is important to identify barriers of physical activity and the needs and interests for technology-enabled exercise in this patient group. PAD patients were recruited at the vascular centre of UZ Leuven (Belgium). A questionnaire assessing PA (SF-International Physical Activity Questionnaire), barriers to PA, and interest in technology-supported exercise (Technology Usage Questionnaire) was completed. Descriptive and correlation analyses were performed. Ninety-nine patients (76 men; mean age 69 years) completed the survey. Physical activity levels were low in 48 %, moderate in 29 %, and high in 23 %. Intermittent claudication itself is the most important barrier for enhanced PA, with most patients reporting pain (93 %), need for rest (92 %), and obstacles worsening their pain (74 %) as barriers. A total of 93 % participants owned a mobile phone; 76 % had Internet access. Eighty-seven reported the need for an exercise programme, with 67 % showing interest in tele-coaching to support exercise. If technology was available, three-quarter stated they would be interested in home-based tele-coaching using the Internet (preferably e-mails, 86 %); 50 % via mobile phone, 87 % preferred text messages. Both were inversely related to age (rpb = 0.363 and rpb = 0.255, p < 0.05). Acquaintance with elastic bands or gaming platforms was moderate (55 and 49 %, respectively), but patients were interested in using them as alternatives (84 and 42 %). Interest in platforms was age-dependent (rs = -0.508, p < 0.01). PAD patients show significant interest in technology-delivered exercise, offering opportunities to develop a guided home-based exercise programme.

C.A.D. and ergonomic workstations conception

NASA Astrophysics Data System (ADS)

Keravel, Francine

1986-07-01

Computer Aided Design is able to perform workstation's conception. An ergonomic data could be complete this view and warrant a coherent fiability conception. Complexe form representation machines, anthropometric data and environment factors are allowed to perceive the limit points between humain and new technology situation. Work ability users, safety, confort and human efficiency could be also included. Such a programm with expert system integration will give a complete listing appreciation about workstation's conception.

East Europe Report, Science and Technology.

DTIC Science & Technology

1985-01-02

modules. The form of network call-up which the programmer can use depends on the source language. These can be actual calls, stored segments or systemic...view of the ever increasing problems, shortages and prices of paper, some Japanese specialists predict that books of the future will not be printed on...Key: 1. Material being measured 2. Radiation source The use of nucleonics in medicine refers to a wide field of applications for diagnosis and

Environmental risks in the developing world: exposure indicators for evaluating interventions, programmes, and policies.

PubMed

Ezzati, Majid; Utzinger, Jürg; Cairncross, Sandy; Cohen, Aaron J; Singer, Burton H

2005-01-01

Monitoring and empirical evaluation are essential components of evidence based public health policies and programmes. Consequently, there is a growing interest in monitoring of, and indicators for, major environmental health risks, particularly in the developing world. Current large scale data collection efforts are generally disconnected from micro-scale studies in health sciences, which in turn have insufficiently investigated the behavioural and socioeconomic factors that influence exposure. A basic framework is proposed for development of indicators of exposure to environmental health risks that would facilitate the (a) assessment of the health effects of risk factors, (b) design and evaluation of interventions and programmes to deliver the interventions, and (c) appraisal and quantification of inequalities in health effects of risk factors, and benefits of intervention programmes and policies. Specific emphasis is put on the features of environmental risks that should guide the choice of indicators, in particular the interactions of technology, the environment, and human behaviour in determining exposure. The indicators are divided into four categories: (a) access and infrastructure, (b) technology, (c) agents and vectors, and (d) behaviour. The study used water and sanitation, indoor air pollution from solid fuels, urban ambient air pollution, and malaria as illustrative examples for this framework. Organised and systematic indicator selection and monitoring can provide an evidence base for design and implementation of more effective and equitable technological interventions, delivery programmes, and policies for environmental health risks in resource poor settings.

Progression in Technology Education in New Zealand: Components of Practice as a Way Forward

ERIC Educational Resources Information Center

Compton, Vicki; Harwood, Cliff

2005-01-01

Understanding and undertaking technological practice is fundamental to student learning in technology education in New Zealand, and the enhancement of student technological literacy. The implementation of technology into New Zealand's core curriculum has reached the stage where it has become critical that learning programmes are based on student…

Practicalities and challenges in re-orienting the health system in Zambia for treating chronic conditions.

PubMed

Aantjes, Carolien J; Quinlan, Tim K C; Bunders, Joske F G

2014-07-08

The rapid evolution in disease burdens in low- and middle income countries is forcing policy makers to re-orient their health system towards a system which has the capability to simultaneously address infectious and non-communicable diseases. This paper draws on two different but overlapping studies which examined how actors in the Zambian health system are re-directing their policies, strategies and service structures to include the provision of health care for people with chronic conditions. Study methods in both studies included semi-structured interviews with government health officials at national level, and governmental and non-governmental health practitioners operating from community-, primary health care to hospital facility level. Focus group discussions were conducted with staff, stakeholders and caregivers of programmes providing care and support at community- and household levels. Study settings included urban and rural sites. A series of adaptations transformed the HIV programme from an emergency response into the first large chronic care programme in the country. There are clear indications that the Zambian government is intending to expand this reach to patients with non-communicable diseases. Challenges to do this effectively include a lack of proper NCD prevalence data for planning, a concentration of technology and skills to detect and treat NCDs at secondary and tertiary levels in the health system and limited interest by donor agencies to support this transition. The reorientation of Zambia's health system is in full swing and uses the foundation of a decentralised health system and presence of local models for HIV chronic care which actively involve community partners, patients and their families. There are early warning signs which could cause this transition to stall, one of which is the financial capability to resource this process.

Advanced Data Acquisition Systems

NASA Technical Reports Server (NTRS)

Perotti, J.

2003-01-01

Current and future requirements of the aerospace sensors and transducers field make it necessary for the design and development of new data acquisition devices and instrumentation systems. New designs are sought to incorporate self-health, self-calibrating, self-repair capabilities, allowing greater measurement reliability and extended calibration cycles. With the addition of power management schemes, state-of-the-art data acquisition systems allow data to be processed and presented to the users with increased efficiency and accuracy. The design architecture presented in this paper displays an innovative approach to data acquisition systems. The design incorporates: electronic health self-check, device/system self-calibration, electronics and function self-repair, failure detection and prediction, and power management (reduced power consumption). These requirements are driven by the aerospace industry need to reduce operations and maintenance costs, to accelerate processing time and to provide reliable hardware with minimum costs. The project's design architecture incorporates some commercially available components identified during the market research investigation like: Field Programmable Gate Arrays (FPGA) Programmable Analog Integrated Circuits (PAC IC) and Field Programmable Analog Arrays (FPAA); Digital Signal Processing (DSP) electronic/system control and investigation of specific characteristics found in technologies like: Electronic Component Mean Time Between Failure (MTBF); and Radiation Hardened Component Availability. There are three main sections discussed in the design architecture presented in this document. They are the following: (a) Analog Signal Module Section, (b) Digital Signal/Control Module Section and (c) Power Management Module Section. These sections are discussed in detail in the following pages. This approach to data acquisition systems has resulted in the assignment of patent rights to Kennedy Space Center under U.S. patent # 6,462,684. Furthermore, NASA KSC commercialization office has issued licensing rights to Circuit Avenue Netrepreneurs, LLC , a minority-owned business founded in 1999 located in Camden, NJ.

Revolution then evolution: the advance of health economic evaluation in Australia.

PubMed

Lopert, Ruth; Viney, Rosalie

2014-01-01

All governments face immense challenges in providing affordable healthcare for their citizens, and the diffusion of novel health technologies is a key driver of growth in expenditure for many. Although important methodological and process variations exist around the world, health economic evaluation is increasingly seen as an important tool to support decision-making around the introduction of new health technologies, interventions and programmes in countries of varying stages of economic development. In Australia, the assessment of the comparative cost-effectiveness of new medicines proposed for subsidy under the country's national drug subsidy programme, the Pharmaceutical Benefits Scheme, was introduced in the late 1980s and became mandatory in 1993, making Australia the first country to introduce such a requirement nationally. Since then the use of health economic evaluation has expanded and been applied to support decision-making across a broader range of health technologies, as well as to programmes in public health. Copyright © 2014. Published by Elsevier GmbH.

Enhancing computer self-efficacy and attitudes in multi-ethnic older adults: a randomised controlled study

PubMed Central

Laganà, Luciana; Oliver, Taylor; Ainsworth, Andrew; Edwards, Marc

2014-01-01

Several studies have documented the health-related benefits of older adults' use of computer technology, but before they can be realised, older individuals must be positively inclined and confident in their ability to engage in computer-based environments. To facilitate the assessment of computer technology attitudes, one aim of the longitudinal study reported in this paper was to test and refine a new 22-item measure of computer technology attitudes designed specifically for older adults, as none such were available.1 Another aim was to replicate, on a much larger scale, the successful findings of a preliminary study that tested a computer technology training programme for older adults (Laganà 2008). Ninety-six older men and women, mainly from non-European-American backgrounds, were randomly assigned to the waitlist/control or the experimental group. The same six-week one-on-one training was administered to the control subjects at the completion of their post-test. The revised (17-item) version of the Older Adults' Computer Technology Attitudes Scale (OACTAS) showed strong reliability: the results of a factor analysis were robust, and two analyses of covariance demonstrated that the training programme induced significant changes in attitudes and self-efficacy. Such results encourage the recruitment of older persons into training programmes aimed at increasing computer technology attitudes and self-efficacy. PMID:25512679

Portable Multispectral Colorimeter for Metallic Ion Detection and Classification

PubMed Central

Jaimes, Ruth F. V. V.; Borysow, Walter; Gomes, Osmar F.; Salcedo, Walter J.

2017-01-01

This work deals with a portable device system applied to detect and classify different metallic ions as proposed and developed, aiming its application for hydrological monitoring systems such as rivers, lakes and groundwater. Considering the system features, a portable colorimetric system was developed by using a multispectral optoelectronic sensor. All the technology of quantification and classification of metallic ions using optoelectronic multispectral sensors was fully integrated in the embedded hardware FPGA ( Field Programmable Gate Array) technology and software based on virtual instrumentation (NI LabView®). The system draws on an indicative colorimeter by using the chromogen reagent of 1-(2-pyridylazo)-2-naphthol (PAN). The results obtained with the signal processing and pattern analysis using the method of the linear discriminant analysis, allows excellent results during detection and classification of Pb(II), Cd(II), Zn(II), Cu(II), Fe(III) and Ni(II) ions, with almost the same level of performance as for those obtained from the Ultravioled and visible (UV-VIS) spectrophotometers of high spectral resolution. PMID:28788082

Generic FPGA-Based Platform for Distributed IO in Proton Therapy Patient Safety Interlock System

NASA Astrophysics Data System (ADS)

Eichin, Michael; Carmona, Pablo Fernandez; Johansen, Ernst; Grossmann, Martin; Mayor, Alexandre; Erhardt, Daniel; Gomperts, Alexander; Regele, Harald; Bula, Christian; Sidler, Christof

2017-06-01

At the Paul Scherrer Institute (PSI) in Switzerland, cancer patients are treated with protons. Proton therapy at PSI has a long history and started in the 1980s. More than 30 years later, a new gantry has recently been installed in the existing facility. This new machine has been delivered by an industry partner. A big challenge is the integration of the vendor's safety system into the existing PSI environment. Different interface standards and the complexity of the system made it necessary to find a technical solution connecting an industry system to the existing PSI infrastructure. A novel very flexible distributed IO system based on field-programmable gate array (FPGA) technology was developed, supporting many different IO interface standards and high-speed communication links connecting the device to a PSI standard versa module eurocard-bus input output controller. This paper summarizes the features of the hardware technology, the FPGA framework with its high-speed communication link protocol, and presents our first measurement results.

Portable Multispectral Colorimeter for Metallic Ion Detection and Classification.

PubMed

Braga, Mauro S; Jaimes, Ruth F V V; Borysow, Walter; Gomes, Osmar F; Salcedo, Walter J

2017-07-28

This work deals with a portable device system applied to detect and classify different metallic ions as proposed and developed, aiming its application for hydrological monitoring systems such as rivers, lakes and groundwater. Considering the system features, a portable colorimetric system was developed by using a multispectral optoelectronic sensor. All the technology of quantification and classification of metallic ions using optoelectronic multispectral sensors was fully integrated in the embedded hardware FPGA ( Field Programmable Gate Array) technology and software based on virtual instrumentation (NI LabView ® ). The system draws on an indicative colorimeter by using the chromogen reagent of 1-(2-pyridylazo)-2-naphthol (PAN). The results obtained with the signal processing and pattern analysis using the method of the linear discriminant analysis, allows excellent results during detection and classification of Pb(II), Cd(II), Zn(II), Cu(II), Fe(III) and Ni(II) ions, with almost the same level of performance as for those obtained from the Ultravioled and visible (UV-VIS) spectrophotometers of high spectral resolution.

The German joint research project "concepts for future gravity satellite missions"

NASA Astrophysics Data System (ADS)

Reubelt, Tilo; Sneeuw, Nico; Fichter, Walter; Müller, Jürgen

2010-05-01

Within the German joint research project "concepts for future gravity satellite missions", funded by the Geotechnologies programme of the German Federal Ministry of Education and Research, options and concepts for future satellite missions for precise (time-variable) gravity field recovery are investigated. The project team is composed of members from science and industry, bringing together experts in geodesy, satellite systems, metrology, sensor technology and control systems. The majority of team members already contributed to former gravity missions. The composition of the team guarantees that not only geodetic aspects and objectives are investigated, but also technological and financial constraints are considered. Conversely, satellite, sensor and system concepts are developed and improved in a direct exchange with geodetic and scientific claims. The project aims to develop concepts for both near and mid-term future satellite missions, taking into account e.g. advanced satellite formations and constellations, improved orbit design, innovative metrology and sensor systems and advances in satellite systems.

Current and future prospects for CRISPR-based tools in bacteria.

PubMed

Luo, Michelle L; Leenay, Ryan T; Beisel, Chase L

2016-05-01

CRISPR-Cas systems have rapidly transitioned from intriguing prokaryotic defense systems to powerful and versatile biomolecular tools. This article reviews how these systems have been translated into technologies to manipulate bacterial genetics, physiology, and communities. Recent applications in bacteria have centered on multiplexed genome editing, programmable gene regulation, and sequence-specific antimicrobials, while future applications can build on advances in eukaryotes, the rich natural diversity of CRISPR-Cas systems, and the untapped potential of CRISPR-based DNA acquisition. Overall, these systems have formed the basis of an ever-expanding genetic toolbox and hold tremendous potential for our future understanding and engineering of the bacterial world. © 2015 Wiley Periodicals, Inc.

Capacity building in emerging space nations: Experiences, challenges and benefits

NASA Astrophysics Data System (ADS)

Jason, Susan; da Silva Curiel, Alex; Liddle, Doug; Chizea, Francis; Leloglu, Ugur Murat; Helvaci, Mustafa; Bekhti, Mohammed; Benachir, Djouad; Boland, Lee; Gomes, Luis; Sweeting, Martin

2010-09-01

This paper focuses on ways in which space is being used to build capacity in science and technology in order to: Offer increasing support for national and global solutions to current and emerging problems including: how to improve food security; resource management; understanding the impacts of climate change and how to deal with them; improving disaster mitigation, management and response. Support sustainable economic development. We present some of the experiences, lessons learned and benefits gained in capacity building projects undertaken by Surrey Satellite Technology Ltd. and our partners from developing and mature space nations. We focus on the Turkish, Algerian and Nigerian know-how and technology transfer programmes which form part of the first Disaster Monitoring Constellation (DMC) in orbit. From the lessons learned on Surrey's know-how and technology transfer partnership programmes, it is clear that space technology needs to be implemented responsibly as part of a long-term capacity building plan to be a sustainable one. It needs to be supported with appropriate policy and legal frameworks, institutional development, including community participation, human resources development and strengthening of managerial systems. In taking this on board, DMC has resulted in a strong international partnership combining national objectives, humanitarian aid and commerce. The benefits include: Ownership of space-based and supporting ground assets with low capital expenditure that is in line with national budgets of developing nations. Ownership of data and control over data acquisition. More for the money via collaborative consortium. Space related capacity building in organisations and nations with the goal of sustainable development. Opportunities for international collaboration, including disaster management and relief.

Critical interactions between Global Fund-supported programmes and health systems: a case study in Indonesia.

PubMed

Desai, Monica; Rudge, James W; Adisasmito, Wiku; Mounier-Jack, Sandra; Coker, Richard

2010-11-01

The Global Fund to Fight AIDS, Tuberculosis and Malaria has played an important role in financing the response to HIV/AIDS and tuberculosis (TB) in Indonesia. As part of a series of case studies, we assessed the nature and extent of integration of Global Fund portfolios into the national HIV and TB programmes, integration of the HIV and TB programmes within the general health system, and system-wide effects of Global Fund support on the health care system in Indonesia. The study relied on a literature review and interviews with 22 key informants using the Systemic Rapid Assessment Toolkit and thematic analysis. Global Fund programmes in Indonesia are highly vertical and centralized, in contrast with the decentralized nature of the Indonesian health system. Consequently, there is more integration of all functions at local levels than centrally. There is a high level of integration of planning of Global Fund HIV and TB portfolios into the National AIDS and TB programmes and some limited integration of these programmes with other disease programmes, through joint working groups. Other synergies include strengthening of stewardship and governance and increased staff recruitment encouraged by incentive payments and training. Monitoring and evaluation functions of the Global Fund programmes are not integrated with the disease programmes, with parallel indicators and reporting systems. System-wide effects include greater awareness of governance and stewardship in response to the temporary suspension of Global Fund funding in 2008, and increased awareness of the need to integrate programme planning, financing and service delivery. Global Fund investment has freed up resources for other programmes, particularly at local levels. However, this may hinder a robust exit strategy from Global Fund funding. Furthermore, Global Fund monetary incentives may result in staff shifting into HIV and TB programmes.

The Artificial Intelligence Applications to Learning Programme.

ERIC Educational Resources Information Center

Williams, Noel

1992-01-01

Explains the Artificial Intelligence Applications to Learning Programme, which was developed in the United Kingdom to explore and accelerate the use of artificial intelligence (AI) technologies in learning in both the educational and industrial sectors. Highlights include program evaluation, marketing, ownership of information, consortia, and cost…

Evaluation of the COMETT Programme.

ERIC Educational Resources Information Center

Thompson, Quentin; Ambler, Mark

1990-01-01

The evaluation report of the European Community Action Programme for Education and Training for Technology (COMETT) examines COMETT program content, COMETT projects, and initial program impact. It was concluded that COMETT has alerted the educational sector and industry to benefits of cooperative training but that transnational cooperative…

Mix-and-match nanobiosensor design: Logical and spatial programming of biosensors using self-assembled DNA nanostructures.

PubMed

Liu, Ying; Kumar, Sriram; Taylor, Rebecca E

2018-04-06

The evergrowing need to understand and engineer biological and biochemical mechanisms has led to the emergence of the field of nanobiosensing. Structural DNA nanotechnology, encompassing methods such as DNA origami and single-stranded tiles, involves the base pairing-driven knitting of DNA into discrete one-, two-, and three-dimensional shapes at nanoscale. Such nanostructures enable a versatile design and fabrication of nanobiosensors. These systems benefit from DNA's programmability, inherent biocompatibility, and the ability to incorporate and organize functional materials such as proteins and metallic nanoparticles. In this review, we present a mix-and-match taxonomy and approach to designing nanobiosensors in which the choices of bioanalyte and transduction mechanism are fully independent of each other. We also highlight opportunities for greater complexity and programmability of these systems that are built using structural DNA nanotechnology. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Diagnostic Tools > Biosensing Biology-Inspired Nanomaterials > Nucleic Acid-Based Structures Nanotechnology Approaches to Biology > Nanoscale Systems in Biology. © 2018 Wiley Periodicals, Inc.

FERMI: a digital Front End and Readout MIcrosystem for high resolution calorimetry

NASA Astrophysics Data System (ADS)

Alexanian, H.; Appelquist, G.; Bailly, P.; Benetta, R.; Berglund, S.; Bezamat, J.; Blouzon, F.; Bohm, C.; Breveglieri, L.; Brigati, S.; Cattaneo, P. W.; Dadda, L.; David, J.; Engström, M.; Genat, J. F.; Givoletti, M.; Goggi, V. G.; Gong, S.; Grieco, G. M.; Hansen, M.; Hentzell, H.; Holmberg, T.; Höglund, I.; Inkinen, S. J.; Kerek, A.; Landi, C.; Ledortz, O.; Lippi, M.; Lofstedt, B.; Lund-Jensen, B.; Maloberti, F.; Mutz, S.; Nayman, P.; Piuri, V.; Polesello, G.; Sami, M.; Savoy-Navarro, A.; Schwemling, P.; Stefanelli, R.; Sundblad, R.; Svensson, C.; Torelli, G.; Vanuxem, J. P.; Yamdagni, N.; Yuan, J.; Ödmark, A.; Fermi Collaboration

1995-02-01

We present a digital solution for the front-end electronics of high resolution calorimeters at future colliders. It is based on analogue signal compression, high speed {A}/{D} converters, a fully programmable pipeline and a digital signal processing (DSP) chain with local intelligence and system supervision. This digital solution is aimed at providing maximal front-end processing power by performing waveform analysis using DSP methods. For the system integration of the multichannel device a multi-chip, silicon-on-silicon multi-chip module (MCM) has been adopted. This solution allows a high level of integration of complex analogue and digital functions, with excellent flexibility in mixing technologies for the different functional blocks. This type of multichip integration provides a high degree of reliability and programmability at both the function and the system level, with the additional possibility of customising the microsystem to detector-specific requirements. For enhanced reliability in high radiation environments, fault tolerance strategies, i.e. redundancy, reconfigurability, majority voting and coding for error detection and correction, are integrated into the design.

Space Technology for Medical Aids

NASA Technical Reports Server (NTRS)

1982-01-01

Under one of the earliest contracts awarded in the Apollo lunar landing program, Parker Hannifin Corporation developed and produced equipment for controlling the flow of propellants into the mammoth engines of the Saturn moonbooster. Today, Parker is supplying the huge valves that control propellant flow from the Space Shuttle's external fuel tank to the engines of the Shuttle Orbiter as well as the "peanut valve," named for its small size. In 1977, NASA, recognizing the company's special expertise in miniature systems, asked Parker to participate in the development of an implantable artificial sphincter for control of urinary incontinence. The company's peanut valve experience provided an ideal base for a new biomedical project, the Programmable Implantable Medication System (PIMS) for continuous, computer-directed delivery of precisely metered medication -- insulin, for example -- within a patient's body. The work on PIMS also inspired development of Micromed, a related programmable medication device for external, rather than implantable use. The Biomedical Products Division has also applied its fluid handling expertise to a drugless therapy system called Cryomax for the treatment of such disorders as rheumatoid arthritis and lupus.

The Changing Earth Science Network- Projects and Results from the First Call

NASA Astrophysics Data System (ADS)

Dransfeld, Steffen; Fernandez, Diego; Doron, Maeva; Martinez, Elodie; Shutler, Jamie; Papandrea, Enzo; Biggs, Juliet; Dagestad, Knut-Frode; Palazzi, Elisa; Garcia-Comas, Maya; de Graaf, Martin; Schneising, Oliver; Pavon, Patricia Oliva

2010-12-01

To better understand the different processes and interactions that govern the earth system and to determine whether recent human-induced changes could ultimately de-stabilise its dynamics, both natural system variability and the consequences of human activities have to be observed and quantified. In this context, the European Space Agency published in 2006 "The Changing Earth: New Scientific Challenges for ESA's living Planet Programme" as the main driver of ESA's new EO science strategy. The document outlines 25 major scientific challenges covering all the different aspects of the Earth system, where EO technology and ESA missions may provide a key contribution. In this context, and responding to a request from ESAC (Earth Science Advisory Committee) to enhance the ESA scientific support towards the achievement of "The Challenges", the Agency has launched the Changing Earth Science Network as an important programmatic component of the new Support To Science Element (STSE) of the Earth Observation Envelope Programme (EOEP). In this paper we summarize the objectives of this initive and provide a review of the first projects that were selected in 2009 and are now generating their first results.

Five Years of Research Into Technology-Enhanced Learning at the Faculty of Materials Science and Technology

NASA Astrophysics Data System (ADS)

Svetský, Štefan; Moravčík, Oliver; Rusková, Dagmar; Balog, Karol; Sakál, Peter; Tanuška, Pavol

2011-01-01

The article describes a five-year period of Technology Enhanced Learning (TEL) implementation at the Faculty of Materials Science and Technology (MTF) in Trnava. It is a part of the challenges put forward by the 7th Framework Programme (ICT research in FP7) focused on "how information and communication technologies can be used to support learning and teaching". The empirical research during the years 2006-2008 was focused on technology-driven support of teaching, i. e. the development of VLE (Virtual Learning Environment) and the development of database applications such as instruments developed simultaneously with the information support of the project, and tested and applied directly in the teaching of bachelor students. During this period, the MTF also participated in the administration of the FP7 KEPLER project proposal in the international consortium of 20 participants. In the following period of 2009-2010, the concept of educational activities automation systematically began to develop. Within this concept, the idea originated to develop a universal multi-purpose system BIKE based on the batch processing knowledge paradigm. This allowed to focus more on educational approach, i.e. TEL educational-driven and to finish the programming of the Internet application - network for feedback (communication between teachers and students). Thanks to this specialization, the results of applications in the teaching at MTF could gradually be presented at the international conferences focused on computer-enhanced engineering education. TEL was implemented at a detached workplace and four institutes involving more than 600 students-bachelors and teachers of technical subjects. Four study programmes were supported, including technical English language. Altogether, the results have been presented via 16 articles in five countries, including the EU level (IGIP-SEFI).

Technological and life cycle assessment of organics processing odour control technologies.

PubMed

Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

2015-09-15

As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. Copyright © 2015 Elsevier B.V. All rights reserved.

How can systems engineering inform the methods of programme evaluation in health professions education?

PubMed

Rojas, David; Grierson, Lawrence; Mylopoulos, Maria; Trbovich, Patricia; Bagli, Darius; Brydges, Ryan

2018-04-01

We evaluate programmes in health professions education (HPE) to determine their effectiveness and value. Programme evaluation has evolved from use of reductionist frameworks to those addressing the complex interactions between programme factors. Researchers in HPE have recently suggested a 'holistic programme evaluation' aiming to better describe and understand the implications of 'emergent processes and outcomes'. We propose a programme evaluation framework informed by principles and tools from systems engineering. Systems engineers conceptualise complexity and emergent elements in unique ways that may complement and extend contemporary programme evaluations in HPE. We demonstrate how the abstract decomposition space (ADS), an engineering knowledge elicitation tool, provides the foundation for a systems engineering informed programme evaluation designed to capture both planned and emergent programme elements. We translate the ADS tool to use education-oriented language, and describe how evaluators can use it to create a programme-specific ADS through iterative refinement. We provide a conceptualisation of emergent elements and an equation that evaluators can use to identify the emergent elements in their programme. Using our framework, evaluators can analyse programmes not as isolated units with planned processes and planned outcomes, but as unfolding, complex interactive systems that will exhibit emergent processes and emergent outcomes. Subsequent analysis of these emergent elements will inform the evaluator as they seek to optimise and improve the programme. Our proposed systems engineering informed programme evaluation framework provides principles and tools for analysing the implications of planned and emergent elements, as well as their potential interactions. We acknowledge that our framework is preliminary and will require application and constant refinement. We suggest that our framework will also advance our understanding of the construct of 'emergence' in HPE research. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Automatic fixation facility for plant seedlings in the TEXUS Sounding Rocket Programme.

PubMed

Tewinkel, M; Burfeindt, J; Rank, P; Volkmann, D

1991-10-01

Automatic chemical fixation of plant seedlings within a 6 min period of reduced gravity (10(-4)g) was performed on three ballistic rocket flights provided by the German Sounding Rocket Programme TEXUS (Technologische Experimente unter Schwerelosigkeit = Technological Experiments in Microgravity). The described TEXUS experiment module consists of a standard experiment housing with batteries, cooling and heating systems, timer, and a data recording unit. Typically, 60 min before launch an experiment plug-in unit containing chambers with the plant material, the fixation system, and the temperature sensors is installed into the module which is already integrated in the payload section of the sounding rocket (late access). During the ballistic flight plant chambers are rapidly filled at pre-selected instants to preserve the cell structure of gravity sensing cells. After landing the plant material is processed for transmission electron microscopy. Up to now three experiments were successfully performed with cress roots (Lepidium sativum L.). Detailed improvements resulted in an automatic fixation facility which in principle can be used in unmanned missions.

Programmable Logic Application Notes

NASA Technical Reports Server (NTRS)

Katz, Richard

1998-01-01

This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter's column will include some announcements and some recent radiation test results and evaluations of interest. Specifically, the following topics will be covered: the Military and Aerospace Applications of Programmable Devices and Technologies Conference to be held at GSFC in September, 1998, proton test results, and some total dose results.

Conceptualising Postgraduate Training in Biotechnology at Universities of Technology

ERIC Educational Resources Information Center

Fossey, A.

2012-01-01

Universities of Technology are mandated to provide career-orientated programmes preparing graduates for the workplace, doing research aimed at identifying societal and industrial needs, and finding solutions. Universities of Technology interweave technology with university endeavours; focusing on the know-how for the fabrication of things, and the…

Perceptions and Impact of Mandatory eLearning for Foundation Trainee Doctors: A Qualitative Evaluation

PubMed Central

Brooks, Hannah L.; Vallance, Hannah K.; Hirsch, Christine A.; Hughes, Elizabeth; Ferner, Robin E.; Marriott, John F.; Coleman, Jamie J.

2016-01-01

Background Junior doctors in the UK must complete various educational components during their two year Foundation training programme. It is important that mandatory learning is informative and engaging. The aim of this study was to evaluate trainee doctors’ perceptions of a Technology Enhanced Learning (TEL) programme developed to improve prescribing competency. Method Focus groups and interviews were conducted at three hospital sites in the West Midlands. Codes, sub-themes and themes were determined using deductive and inductive thematic analysis. Results Data were collected from 38 Foundation trainee doctors. Results revealed major themes relating to prescribing education, the user experience and user engagement. Key findings included the positive impact of preparedness following undergraduate education on the user experience of the TEL programme at the postgraduate level; the impact of content, structure, and individual learning needs and styles on the user experience; and the impact of motivation and time on engagement. Most trainees engaged with the programme owing to its mandatory nature; however, some trainees also used the programme voluntarily, for example, to acquire knowledge prior to starting a new placement. Conclusions It is important to ensure that learners are willing to engage with mandatory TEL, and that they have the time and motivation to do so. It is also important to ensure that learners have a positive user experience and that in designing TEL individual differences in learning styles and needs are taken into account. These findings have implications for educators and system developers in the construction and design of mandatory eLearning programmes. PMID:28005938

A High-Voltage SOI CMOS Exciter Chip for a Programmable Fluidic Processor System.

PubMed

Current, K W; Yuk, K; McConaghy, C; Gascoyne, P R C; Schwartz, J A; Vykoukal, J V; Andrews, C

2007-06-01

A high-voltage (HV) integrated circuit has been demonstrated to transport fluidic droplet samples on programmable paths across the array of driving electrodes on its hydrophobically coated surface. This exciter chip is the engine for dielectrophoresis (DEP)-based micro-fluidic lab-on-a-chip systems, creating field excitations that inject and move fluidic droplets onto and about the manipulation surface. The architecture of this chip is expandable to arrays of N X N identical HV electrode driver circuits and electrodes. The exciter chip is programmable in several senses. The routes of multiple droplets may be set arbitrarily within the bounds of the electrode array. The electrode excitation waveform voltage amplitude, phase, and frequency may be adjusted based on the system configuration and the signal required to manipulate a particular fluid droplet composition. The voltage amplitude of the electrode excitation waveform can be set from the minimum logic level up to the maximum limit of the breakdown voltage of the fabrication technology. The frequency of the electrode excitation waveform can also be set independently of its voltage, up to a maximum depending upon the type of droplets that must be driven. The exciter chip can be coated and its oxide surface used as the droplet manipulation surface or it can be used with a top-mounted, enclosed fluidic chamber consisting of a variety of materials. The HV capability of the exciter chip allows the generated DEP forces to penetrate into the enclosed chamber region and an adjustable voltage amplitude can accommodate a variety of chamber floor thicknesses. This demonstration exciter chip has a 32 x 32 array of nominally 100 V electrode drivers that are individually programmable at each time point in the procedure to either of two phases: 0deg and 180deg with respect to the reference clock. For this demonstration chip, while operating the electrodes with a 100-V peak-to-peak periodic waveform, the maximum HV electrode waveform frequency is about 200 Hz; and standard 5-V CMOS logic data communication rate is variable up to 250 kHz. This HV demonstration chip is fabricated in a 130-V 1.0-mum SOI CMOS fabrication technology, dissipates a maximum of 1.87 W, and is about 10.4 mm x 8.2 mm.

Introducing technology education to young children: A design, make and appraise approach

NASA Astrophysics Data System (ADS)

Fleer, Marilyn

1992-12-01

The National Statement on Technology Education will soon be released in Australia. The statement advocates a design, make and appraise approach to technology education. The document includes Year One children and provides exemplars of curriculum activities for early childhood children. Although much curriculum development in technology education for primary and early childhood has taken place in the UK, little research has been conducted within the early childhood area in Australia. This paper describes a study which sought to investigate how the design, make and appraise approach could be implemented within early childhood using existing materials, procedures and teaching programmes. In particular, the pre-school programme was considered to see if the approach was suitable for young children, and if girls could be encouraged into this newly defined area of study.

Students views of integrating web-based learning technology into the nursing curriculum - A descriptive survey.

PubMed

Adams, Audrey; Timmins, Fiona

2006-01-01

This paper describes students' experiences of a Web-based innovation at one university. This paper reports on the first phase of this development where two Web-based modules were developed. Using a survey approach (n=44) students' access to and use of computer technology were explored. Findings revealed that students' prior use of computers and Internet technologies was higher than previously reported, although use of databases was low. Skills in this area increased during the programme, with a significant rise in database, email, search engine and word processing use. Many specific computer skills were learned during the programme, with high numbers reporting ability to deal adequately with files and folders. Overall, the experience was a positive one for students. While a sense of student isolation was not reported, as many students kept in touch by phone and class attendance continued, some individual students did appear to isolate themselves. This teaching methodology has much to offer in the provision of convenient easy to access programmes that can be easily adapted to the individual lifestyle. However, student support mechanisms need careful consideration for students who are at risk of becoming isolated. Staff also need to supported in the provision of this methodology and face-to-face contact with teachers for some part of the programme is preferable.

South African CSP projects under the REIPPP programme - Requirements, challenges and opportunities

NASA Astrophysics Data System (ADS)

Relancio, Javier; Cuellar, Alberto; Walker, Gregg; Ettmayr, Chris

2016-05-01

Thus far seven Concentrated Solar Power (CSP) projects have been awarded under the Renewable Energy Independent Power Producer Procurement Programme (REIPPPP), totalling 600MW: one project is in operation, four under construction and two on their way to financial close. This provides an excellent opportunity for analysis of key features of the projects that have contributed to or detracted from the programme's success. The paper draws from Mott MacDonald's involvement as Technical Advisor on the seven CSP projects that have been successful under the REIPPPP to date as well as other global CSP developments. It presents how various programme requirements have affected the implementation of projects, such as the technical requirements, time of day tariff structure, economic development requirements and the renewable energy grid code. The increasingly competitive tariffs offered have encouraged developers to investigate efficiency maximising project configurations and cost saving mechanisms, as well as featuring state of the art technology in their proposals. The paper assesses the role of the project participants (developers, lenders and government) with regards to these innovative technologies and solutions. In our paper we discuss the status of projects and the SA market, analysing the main challenges and opportunities that in turn have influenced various aspects such as technology choice, operational regimes and supply chain arrangements.

An online positive parenting skills programme for paediatric traumatic brain injury: feasibility and parental satisfaction.

PubMed

Antonini, Tanya N; Raj, Stacey P; Oberjohn, Karen S; Wade, Shari L

2012-09-01

We examined the feasibility of and parental satisfaction with a training programme for parents with children who had suffered traumatic brain injury (TBI). Families who did not have a home computer and/or webcam were loaned the necessary equipment. Skype was used for videoconferencing. After the initial treatment session in the family's home, the remaining nine sessions were conducted online. Each session had two parts: (1) a self-guided web session with information about a particular skill; (2) a videoconference session with the therapist. Three of the 20 families (15%) dropped out prior to the final 6-month follow-up visit. Of the remaining 17 families, 13 (65% of those enrolled) completed 9-14 sessions. Almost all of the caregivers (87%) said that the Skype sessions were helpful compared to a conventional office visit. Almost all parents were satisfied with the programme and the technology that was used. Parental satisfaction with the programme was not influenced by prior computer ownership or comfort with technology. The programme appears to be feasible for a wide range of parents of children with TBI and provides an alternative to conventional office-based sessions that may not be accessible to all families.

Use of computers and the Internet by residents in US family medicine programmes.

PubMed

King, Richard V; Murphy-Cullen, Cassie L; Mayo, Helen G; Marcee, Alice K; Schneider, Gregory W

2007-06-01

Computers, personal digital assistants (PDA), and the Internet are widely used as resources in medical education and clinical care. Educators who intend to incorporate these resources effectively into residency education programmes can benefit from understanding how residents currently use these tools, their skills, and their preferences. The researchers sent questionnaires to 306 US family medicine residency programmes for all of their residents to complete. Respondents were 1177 residents from 125 (41%) programmes. Access to a computer was reported by 95% of respondents. Of these, 97% of desktop and 89% of laptop computers could access the Internet. Residents accessed various educational and clinical resources. Half felt they had 'intermediate' skills at Web searches, 23% had 'some skills,' and 27% were 'quite skilled.' Those under 30 years of age reported higher skill levels. Those who experienced a Web-based curriculum in medical school reported higher search skills and greater success in finding clinical information. Respondents preferred to use technology to supplement the didactic sessions offered in resident teaching conferences. Favourable conditions exist in family medicine residency programmes to implement a blend of traditional and technology-based learning experiences. These conditions include residents' experience, skills, and preferences.

Implementation of Active Teaching Methods and Emerging Topics in Photogrammetry and Remote Sensing Subjects

NASA Astrophysics Data System (ADS)

Kosmatin Fras, M.; Grigillo, D.

2016-06-01

Fast technological developments in photogrammetry and remote sensing areas demand quick and steady changes in the education programme and its realization. The university teachers and assistants are faced with ensuring the learning materials, data and software for practical lessons, as well as project proposals for student's team work and bachelor or master thesis. In this paper the emerging topics that already have a considerable impact in the practice are treated mostly from the educational aspect. These relatively new topics that are considered in this paper are unmanned aerial systems for spatial data collection, terrestrial and aerial laser scanning, mobile mapping systems, and novelties in satellite remote sensing. The focus is given to practical implementation of these topics into the teaching and learning programme of Geodesy and Geoinformation at the University of Ljubljana, Faculty of Civil and Geodetic Engineering, and experiences gained by the authors so far. Together with the technological advances, the teaching approaches must be modernized as well. Classical approaches of teaching, where a lecturer gives lecture ex cathedra and students are only listeners, are not effective enough. The didactics science of teaching has developed and proved in the practice many useful approaches that can better motivate students for more active learning. We can use different methods of team work like pro et contra debate, buzzing groups, press conference, moderated discussion etc. An experimental study on active teaching methods in the class of students of the Master programme of Geodesy and Geoinformation has been made and the results are presented. After using some new teaching methods in the class, the students were asked to answer two types of a questionnaire. First questionnaire was the standard form developed by Noel Entwistle, an educational psychologist who developed the Approaches to Studying Inventory (ASI) for identifying deep and surface approaches to learning. The second questionnaire was developed for our purpose to get the feedback from students on active teaching and learning methods. Although this investigation has been done only for one class of master programme students, the results are encouraging and we could extract some recommendations for the future.

Genetic tool development and systemic regulation in biosynthetic technology.

PubMed

Dai, Zhongxue; Zhang, Shangjie; Yang, Qiao; Zhang, Wenming; Qian, Xiujuan; Dong, Weiliang; Jiang, Min; Xin, Fengxue

2018-01-01

With the increased development in research, innovation, and policy interest in recent years, biosynthetic technology has developed rapidly, which combines engineering, electronics, computer science, mathematics, and other disciplines based on classical genetic engineering and metabolic engineering. It gives a wider perspective and a deeper level to perceive the nature of life via cell mechanism, regulatory networks, or biological evolution. Currently, synthetic biology has made great breakthrough in energy, chemical industry, and medicine industries, particularly in the programmable genetic control at multiple levels of regulation to perform designed goals. In this review, the most advanced and comprehensive developments achieved in biosynthetic technology were represented, including genetic engineering as well as synthetic genomics. In addition, the superiority together with the limitations of the current genome-editing tools were summarized.

Extent of Integration of Priority Interventions into General Health Systems: A Case Study of Neglected Tropical Diseases Programme in the Western Region of Ghana.

PubMed

Mensah, Ernest O; Aikins, Moses K; Gyapong, Margaret; Anto, Francis; Bockarie, Moses J; Gyapong, John O

2016-05-01

The global health system has a large arsenal of interventions, medical products and technologies to address current global health challenges. However, identifying the most effective and efficient strategies to deliver these resources to where they are most needed has been a challenge. Targeted and integrated interventions have been the main delivery strategies. However, the health system discourse increasingly favours integrated strategies in the context of functionally merging targeted interventions with multifunctional health care delivery systems with a focus on strengthening country health systems to deliver needed interventions. Neglected Tropical Diseases (NTD) have been identified to promote and perpetuate poverty hence there has been global effort to combat these diseases. The Neglected Tropical Diseases Programme (NTDP) in Ghana has a national programme team and office, however, it depends on the multifunctional health delivery system at the regional and district level to implement interventions. The NTDP seeks further health system integration to accelerate achievement of coverage targets. The study estimated the extent of integration of the NTDP at the national, regional and district levels to provide evidence to guide further integration. The research design was a descriptive case study that interviewed key persons involved in the programme at the three levels of the health system as well as extensive document review. Integration was assessed on two planes-across health system functions-stewardship and governance, financing, planning, service delivery, monitoring and evaluation and demand generation; and across three administrative levels of the health system-national, regional and district. A composite measure of integration designated Cumulative Integration Index (CII) with a range of 0.00-1.00 was used to estimate extent of integration at the three levels of the health system. Service delivery was most integrated while financing and planning were least integrated. Extent of integration was partial at all levels of the health system with a CII of 0.48-0.68; however it was higher at the district compared to the national and regional levels. To ensure further integration of the NTDP, planning and finance management activities must be decentralized to involve regional and district levels of the health system. The study provides an empirical measure of extent of integration and indicators to guide further integration.

Retrospective Analysis of a Classical Biological Control Programme

USDA-ARS?s Scientific Manuscript database

1. Classical biological control has been a key technology in the management of invasive arthropod pests globally for over 120 years, yet rigorous quantitative evaluations of programme success or failure are rare. Here, I used life table and matrix model analyses, and life table response experiments ...

VASP-4096: a very high performance programmable device for digital media processing applications

NASA Astrophysics Data System (ADS)

Krikelis, Argy

2001-03-01

Over the past few years, technology drivers for microprocessors have changed significantly. Media data delivery and processing--such as telecommunications, networking, video processing, speech recognition and 3D graphics--is increasing in importance and will soon dominate the processing cycles consumed in computer-based systems. This paper presents the architecture of the VASP-4096 processor. VASP-4096 provides high media performance with low energy consumption by integrating associative SIMD parallel processing with embedded microprocessor technology. The major innovations in the VASP-4096 is the integration of thousands of processing units in a single chip that are capable of support software programmable high-performance mathematical functions as well as abstract data processing. In addition to 4096 processing units, VASP-4096 integrates on a single chip a RISC controller that is an implementation of the SPARC architecture, 128 Kbytes of Data Memory, and I/O interfaces. The SIMD processing in VASP-4096 implements the ASProCore architecture, which is a proprietary implementation of SIMD processing, operates at 266 MHz with program instructions issued by the RISC controller. The device also integrates a 64-bit synchronous main memory interface operating at 133 MHz (double-data rate), and a 64- bit 66 MHz PCI interface. VASP-4096, compared with other processors architectures that support media processing, offers true performance scalability, support for deterministic and non-deterministic data processing on a single device, and software programmability that can be re- used in future chip generations.

The UK's National Programme for IT: Why was it dismantled?

PubMed

Justinia, Taghreed

2017-02-01

This paper discusses the UK's National Programme for IT (NPfIT), which was an ambitious programme launched in 2002 with an initial budget of some £6.2 billion. It attempted to implement a top-down digitization of healthcare in England's National Health Service (NHS). The core aim of the NPfIT was to bring the NHS' use of information technology into the 21st century, through the introduction of an integrated electronic patient record systems, and reforming the way that the NHS uses information, and hence to improve services and the quality of patient care. The initiative was not trusted by doctors and appeared to have no impact on patient safety. The project was marred by resistance due to the inappropriateness of a centralized authority making top-down decisions on behalf of local organizations. The NPfIT was officially dismantled in September 2011. Deemed the world's largest civil IT programme, its failure and ultimate demise sparked a lot of interest as to the reasons why. This paper summarises the underlying causes that lead to dismantling the NPfIT. At the forefront of those circumstances were the lack of adequate end user engagement, the absence of a phased change management approach, and underestimating the scale of the project.

Transport infrastructure surveillance and monitoring by electromagnetic sensing: the ISTIMES project.

PubMed

Proto, Monica; Bavusi, Massimo; Bernini, Romeo; Bigagli, Lorenzo; Bost, Marie; Bourquin, Frédrèric; Cottineau, Louis-Marie; Cuomo, Vincenzo; Della Vecchia, Pietro; Dolce, Mauro; Dumoulin, Jean; Eppelbaum, Lev; Fornaro, Gianfranco; Gustafsson, Mats; Hugenschmidt, Johannes; Kaspersen, Peter; Kim, Hyunwook; Lapenna, Vincenzo; Leggio, Mario; Loperte, Antonio; Mazzetti, Paolo; Moroni, Claudio; Nativi, Stefano; Nordebo, Sven; Pacini, Fabrizio; Palombo, Angelo; Pascucci, Simone; Perrone, Angela; Pignatti, Stefano; Ponzo, Felice Carlo; Rizzo, Enzo; Soldovieri, Francesco; Taillade, Fédrèric

2010-01-01

The ISTIMES project, funded by the European Commission in the frame of a joint Call "ICT and Security" of the Seventh Framework Programme, is presented and preliminary research results are discussed. The main objective of the ISTIMES project is to design, assess and promote an Information and Communication Technologies (ICT)-based system, exploiting distributed and local sensors, for non-destructive electromagnetic monitoring of critical transport infrastructures. The integration of electromagnetic technologies with new ICT information and telecommunications systems enables remotely controlled monitoring and surveillance and real time data imaging of the critical transport infrastructures. The project exploits different non-invasive imaging technologies based on electromagnetic sensing (optic fiber sensors, Synthetic Aperture Radar satellite platform based, hyperspectral spectroscopy, Infrared thermography, Ground Penetrating Radar-, low-frequency geophysical techniques, Ground based systems for displacement monitoring). In this paper, we show the preliminary results arising from the GPR and infrared thermographic measurements carried out on the Musmeci bridge in Potenza, located in a highly seismic area of the Apennine chain (Southern Italy) and representing one of the test beds of the project.

Transport Infrastructure Surveillance and Monitoring by Electromagnetic Sensing: The ISTIMES Project

PubMed Central

Proto, Monica; Bavusi, Massimo; Bernini, Romeo; Bigagli, Lorenzo; Bost, Marie; Bourquin, Frédrèric.; Cottineau, Louis-Marie; Cuomo, Vincenzo; Vecchia, Pietro Della; Dolce, Mauro; Dumoulin, Jean; Eppelbaum, Lev; Fornaro, Gianfranco; Gustafsson, Mats; Hugenschmidt, Johannes; Kaspersen, Peter; Kim, Hyunwook; Lapenna, Vincenzo; Leggio, Mario; Loperte, Antonio; Mazzetti, Paolo; Moroni, Claudio; Nativi, Stefano; Nordebo, Sven; Pacini, Fabrizio; Palombo, Angelo; Pascucci, Simone; Perrone, Angela; Pignatti, Stefano; Ponzo, Felice Carlo; Rizzo, Enzo; Soldovieri, Francesco; Taillade, Fédrèric

2010-01-01

The ISTIMES project, funded by the European Commission in the frame of a joint Call “ICT and Security” of the Seventh Framework Programme, is presented and preliminary research results are discussed. The main objective of the ISTIMES project is to design, assess and promote an Information and Communication Technologies (ICT)-based system, exploiting distributed and local sensors, for non-destructive electromagnetic monitoring of critical transport infrastructures. The integration of electromagnetic technologies with new ICT information and telecommunications systems enables remotely controlled monitoring and surveillance and real time data imaging of the critical transport infrastructures. The project exploits different non-invasive imaging technologies based on electromagnetic sensing (optic fiber sensors, Synthetic Aperture Radar satellite platform based, hyperspectral spectroscopy, Infrared thermography, Ground Penetrating Radar-, low-frequency geophysical techniques, Ground based systems for displacement monitoring). In this paper, we show the preliminary results arising from the GPR and infrared thermographic measurements carried out on the Musmeci bridge in Potenza, located in a highly seismic area of the Apennine chain (Southern Italy) and representing one of the test beds of the project. PMID:22163489

System and method for acquisition management of subject position information

DOEpatents

Carrender, Curt

2005-12-13

A system and method for acquisition management of subject position information that utilizes radio frequency identification (RF ID) to store position information in position tags. Tag programmers receive position information from external positioning systems, such as the Global Positioning System (GPS), from manual inputs, such as keypads, or other tag programmers. The tag programmers program each position tag with the received position information. Both the tag programmers and the position tags can be portable or fixed. Implementations include portable tag programmers and fixed position tags for subject position guidance, and portable tag programmers for collection sample labeling. Other implementations include fixed tag programmers and portable position tags for subject route recordation. Position tags can contain other associated information such as destination address of an affixed subject for subject routing.

System and method for acquisition management of subject position information

DOEpatents

Carrender, Curt [Morgan Hill, CA

2007-01-23

A system and method for acquisition management of subject position information that utilizes radio frequency identification (RF ID) to store position information in position tags. Tag programmers receive position information from external positioning systems, such as the Global Positioning System (GPS), from manual inputs, such as keypads, or other tag programmers. The tag programmers program each position tag with the received position information. Both the tag programmers and the position tags can be portable or fixed. Implementations include portable tag programmers and fixed position tags for subject position guidance, and portable tag programmers for collection sample labeling. Other implementations include fixed tag programmers and portable position tags for subject route recordation. Position tags can contain other associated information such as destination address of an affixed subject for subject routing.

Identification and assessment of professional competencies for implementation of nanotechnology in engineering education

NASA Astrophysics Data System (ADS)

Jean, Ming-Der; Jiang, Ji-Bin; Chien, Jia-Yi

2017-11-01

The purpose of this study was to construct the indicators of professional competencies of the nanotechnology-based sputtering system industry based on industry requirements and analyse the core competencies of the industry for promoting the human resource of physical vapour deposition technology. The document analysis, expert interview, and Delphi technique surveys were considered and the survey items with 32 items divided into 7 domains were selected according to consensus opinions of 10 experts by the Delphi survey technique. Through three questionnaire surveys' analysis, the professional competence scales for the K-S tests showed a good internal consistency. The findings of this study provide guidelines for professional competence for nanotechnology-based sputtering technology by applying surface heat-treatment industry. These guidelines can also reveal the practical competency requirements of nanotechnology-based sputtering technology to deal with any subsequent challenges, future developments, and invisible services for students in a technology institute programme.

Business Models of E-Government: Research on Dynamic E-Government Based on Web Services

NASA Astrophysics Data System (ADS)

Li, Yan; Yang, Jiumin

Government transcends all sectors in a society. It provides not only the legal, political and economic infrastructure to support other sectors, but also exerts significant influence on the social factors that contribute to their development. With its maturity of technologies and management, e-government will eventually enter into the time of 'one-stop' services. Among others, the technology of Web services is the major contributor to this achievement. Web services provides a new way of standard-based software technology, letting programmers combine existing computer system in new ways over the Internet within one business or across many, and would thereby bring about profound and far-reaching impacts on e-government. This paper introduced the business modes of e-government, architecture of dynamic e-government and its key technologies. Finally future prospect of dynamic e-government was also briefly discussed.

Critical materials: a reason for sustainable education of industrial designers and engineers

NASA Astrophysics Data System (ADS)

Köhler, Andreas R.; Bakker, Conny; Peck, David

2013-08-01

Developed economies have become highly dependent on a range of technology metals with names such as neodymium and terbium. Stakeholders have warned of the impending scarcity of these critical materials. Difficulties in materials supply can affect the high-tech industries as well as the success of sustainable innovation strategies that are based on sophisticated technology. Industrial designers and engineers should therefore increase their awareness of the limits in availability of critical materials. In this paper, it is argued that materials' criticality can give a fresh impetus to the higher education of industrial design engineers. It is important to train future professionals to apply a systems perspective to the process of technology innovation, enabling them to thrive under circumstances of constrained material choices. The conclusions outline ideas on how to weave the topic into existing educational programmes of future technology developers.

Extent of Integration of Priority Interventions into General Health Systems: A Case Study of Neglected Tropical Diseases Programme in the Western Region of Ghana

PubMed Central

Mensah, Ernest O.; Aikins, Moses K.; Gyapong, Margaret; Anto, Francis; Bockarie, Moses J.; Gyapong, John O.

2016-01-01

Background The global health system has a large arsenal of interventions, medical products and technologies to address current global health challenges. However, identifying the most effective and efficient strategies to deliver these resources to where they are most needed has been a challenge. Targeted and integrated interventions have been the main delivery strategies. However, the health system discourse increasingly favours integrated strategies in the context of functionally merging targeted interventions with multifunctional health care delivery systems with a focus on strengthening country health systems to deliver needed interventions. Neglected Tropical Diseases (NTD) have been identified to promote and perpetuate poverty hence there has been global effort to combat these diseases. The Neglected Tropical Diseases Programme (NTDP) in Ghana has a national programme team and office, however, it depends on the multifunctional health delivery system at the regional and district level to implement interventions. The NTDP seeks further health system integration to accelerate achievement of coverage targets. The study estimated the extent of integration of the NTDP at the national, regional and district levels to provide evidence to guide further integration. Methodology/Principal Findings The research design was a descriptive case study that interviewed key persons involved in the programme at the three levels of the health system as well as extensive document review. Integration was assessed on two planes—across health system functions–stewardship and governance, financing, planning, service delivery, monitoring and evaluation and demand generation; and across three administrative levels of the health system–national, regional and district. A composite measure of integration designated Cumulative Integration Index (CII) with a range of 0.00–1.00 was used to estimate extent of integration at the three levels of the health system. Service delivery was most integrated while financing and planning were least integrated. Extent of integration was partial at all levels of the health system with a CII of 0.48–0.68; however it was higher at the district compared to the national and regional levels. Conclusions/Significance To ensure further integration of the NTDP, planning and finance management activities must be decentralized to involve regional and district levels of the health system. The study provides an empirical measure of extent of integration and indicators to guide further integration. PMID:27203854

All-optical central-frequency-programmable and bandwidth-tailorable radar

PubMed Central

Zou, Weiwen; Zhang, Hao; Long, Xin; Zhang, Siteng; Cui, Yuanjun; Chen, Jianping

2016-01-01

Radar has been widely used for military, security, and rescue purposes, and modern radar should be reconfigurable at multi-bands and have programmable central frequencies and considerable bandwidth agility. Microwave photonics or photonics-assisted radio-frequency technology is a unique solution to providing such capabilities. Here, we demonstrate an all-optical central-frequency-programmable and bandwidth-tailorable radar architecture that provides a coherent system and utilizes one mode-locked laser for both signal generation and reception. Heterodyning of two individually filtered optical pulses that are pre-chirped via wavelength-to-time mapping generates a wideband linearly chirped radar signal. The working bands can be flexibly tailored with the desired bandwidth at a user-preferred carrier frequency. Radar echoes are first modulated onto the pre-chirped optical pulse, which is also used for signal generation, and then stretched in time or compressed in frequency several fold based on the time-stretch principle. Thus, digitization is facilitated without loss of detection ability. We believe that our results demonstrate an innovative radar architecture with an ultra-high-range resolution. PMID:26795596

Data on European non-residential buildings.

PubMed

D'Agostino, Delia; Cuniberti, Barbara; Bertoldi, Paolo

2017-10-01

This data article relates to the research paper Energy consumption and efficiency technology measures in European non-residential buildings (D'Agostino et al., 2017) [1]. The reported data have been collected in the framework of the Green Building Programme that ran from 2006 to 2014. The project has encouraged the adoption of efficiency measures to boost energy savings in European non-residential buildings. Data focus on the one-thousand buildings that joined the Programme allowing to save around 985 GWh/year. The main requirement to join the Programme was the reduction of at least 25% primary energy consumption in a new or retrofitted building. Energy consumption before and after the renovation are provided for retrofitted buildings while, in new constructions, a building had to be designed using at least 25% less energy than requested by the country's building codes. The following data are linked within this article: energy consumption, absolute and relative savings related to primary energy, saving percentages, implemented efficiency measures and renewables. Further information is given about each building in relation to geometry, envelope, materials, lighting and systems.

JPRS Report, Science & Technology. USSR: Science & Technology Policy

DTIC Science & Technology

1989-10-23

Soviet Programmers Form Joint Venture with Olivetti; Scientist Debate Reoccupation of Chernobyl Radiation Zones; Effect of Cost Accounting on Scientific Research; Lithuanian State Prizes for S&T Awarded; and others.

A Proposed Community Network For Monitoring Volcanic Emissions In Saint Lucia, Lesser Antilles

NASA Astrophysics Data System (ADS)

Joseph, E. P.; Beckles, D. M.; Robertson, R. E.; Latchman, J. L.; Edwards, S.

2013-12-01

Systematic geochemical monitoring of volcanic systems in the English-speaking islands of the Lesser Antilles was initiated by the UWI Seismic Research Centre (SRC) in 2000, as part of its volcanic surveillance programme for the English-speaking islands of the Lesser Antilles. This programme provided the first time-series observations used for the purpose of volcano monitoring in Dominica and Saint Lucia, permitted the characterization of the geothermal fluids associated with them, and established baseline studies for understanding of the hydrothermal systems during periods of quiescence (Joseph et al., 2011; Joseph et al., 2013). As part of efforts to improve and expand the capacity of SRC to provide volcanic surveillance through its geothermal monitoring programme, it is necessary to develop economically sustainable options for the monitoring of volcanic emissions/pollutants. Towards this effort we intend to work in collaboration with local authorities in Saint Lucia, to develop a monitoring network for quantifying the background exposure levels of ambient concentrations of volcanic pollutants, SO2 in air and As in waters (as health significant marker elements in the geothermal emissions) that would serve as a model for the emissions monitoring network for other volcanic islands. This programme would facilitate the building of local capacity and training to monitor the hazardous exposure, through the application and transfer of a regionally available low-cost and low-technology SO2 measurement/detection system in Saint Lucia. Existing monitoring technologies to inform evidence based health practices are too costly for small island Caribbean states, and no government policies or health services measures currently exist to address/mitigate these influences. Gases, aerosols and toxic elements from eruptive and non-eruptive volcanic activity are known to adversely affect human health and the environment (Baxter, 2000; Zhang et al., 2008). Investigations into the impact of volcanic emissions on health have been almost exclusively focused on acute responses, or the effects of one-off eruptions (Horwell and Baxter, 2006). However, little attention has been paid to any long-term impacts on human health in the population centers around volcanoes as a result of exposure to passive emissions from active geothermal systems. The role of volcano tourism is also recognized as an important contributor to the economy of volcanic islands in the Lesser Antilles. However, if it is to be promoted as a sustainable sector of the tourism industry tourists, tour guides, and vendors must be made aware of the potential health hazards facing them in volcanic environments.

Progress and Achievements at the Mid Term Stage of the Dragon 3 Programme

NASA Astrophysics Data System (ADS)

Desnos, Yves-Louis; Li, Zengyuan; Zmuda, Andy; Gao, Zhihai

2014-11-01

The Dragon Programme is a joint undertaking between ESA and the Ministry of Science and Technology (MOST) of China and the National Remote Sensing Center of China (NRSCC). Its purpose is to encourage increased exploitation of ESA and Chinese space resources within China as well as stimulate increased scientific cooperation in the field of Earth Observation (EO) science and applications between China and Europe. Since 2004, this pioneering programme has become a model for scientific and technological cooperation between China and Europe. By successfully encouraging joint research using ESA, Third Party Missions and Chinese EO data across a range of thematic areas, Dragon continues to deliver outstanding scientific results. The programme has successfully completed two phases, Dragon 1 from 2004 to 2008, Dragon 2 from 2008 to 2012. The third phase of Dragon was started in 2012 and will be completed in 2016. The Dragon 3 project teams are led by leading EO scientists and young scientists are also engaged on the projects. Advanced training in land, ocean and atmospheric applications is a feature of the programme and a course on land and one course on ocean applications have been successfully held in 2012 and 2013 in China. Here-in provided is an overview of the results, reporting and training activities at the mid-term stage of the programme.

Proceedings of the Systems Reengineering Technology Workshop (4th) held in Monterey, California on February 8 - 10, 1994

DTIC Science & Technology

1994-09-01

report for the Properties of User Interface Software Architetures ", draft DISCUS Working Group, Programmers Tutorial, MITRE paper, SEI. Carnegie...execution that we have defined called asynchronous remote procedure call (ARPC) [15], which allows concurrency in amounts proportional to the amount of...demonstration project to use STARS DoD software budget and the proportion concepts. IBM is one of the prime is expected to be increased during the contractors

A wideband software reconfigurable modem

NASA Astrophysics Data System (ADS)

Turner, J. H., Jr.; Vickers, H.

A wideband modem is described which provides signal processing capability for four Lx-band signals employing QPSK, MSK and PPM waveforms and employs a software reconfigurable architecture for maximum system flexibility and graceful degradation. The current processor uses a 2901 and two 8086 microprocessors per channel and performs acquisition, tracking, and data demodulation for JITDS, GPS, IFF and TACAN systems. The next generation processor will be implemented using a VHSIC chip set employing a programmable complex array vector processor module, a GP computer module, customized gate array modules, and a digital array correlator. This integrated processor has application to a wide number of diverse system waveforms, and will bring the benefits of VHSIC technology insertion into avionic antijam communications systems.

Mutation Testing for Effective Verification of Digital Components of Physical Systems

NASA Astrophysics Data System (ADS)

Kushik, N. G.; Evtushenko, N. V.; Torgaev, S. N.

2015-12-01

Digital components of modern physical systems are often designed applying circuitry solutions based on the field programmable gate array technology (FPGA). Such (embedded) digital components should be carefully tested. In this paper, an approach for the verification of digital physical system components based on mutation testing is proposed. The reference description of the behavior of a digital component in the hardware description language (HDL) is mutated by introducing into it the most probable errors and, unlike mutants in high-level programming languages, the corresponding test case is effectively derived based on a comparison of special scalable representations of the specification and the constructed mutant using various logic synthesis and verification systems.

Using benchmarks for radiation testing of microprocessors and FPGAs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quinn, Heather; Robinson, William H.; Rech, Paolo

Performance benchmarks have been used over the years to compare different systems. These benchmarks can be useful for researchers trying to determine how changes to the technology, architecture, or compiler affect the system's performance. No such standard exists for systems deployed into high radiation environments, making it difficult to assess whether changes in the fabrication process, circuitry, architecture, or software affect reliability or radiation sensitivity. In this paper, we propose a benchmark suite for high-reliability systems that is designed for field-programmable gate arrays and microprocessors. As a result, we describe the development process and report neutron test data for themore » hardware and software benchmarks.« less

Using benchmarks for radiation testing of microprocessors and FPGAs

DOE PAGES

Quinn, Heather; Robinson, William H.; Rech, Paolo; ...

2015-12-17

Performance benchmarks have been used over the years to compare different systems. These benchmarks can be useful for researchers trying to determine how changes to the technology, architecture, or compiler affect the system's performance. No such standard exists for systems deployed into high radiation environments, making it difficult to assess whether changes in the fabrication process, circuitry, architecture, or software affect reliability or radiation sensitivity. In this paper, we propose a benchmark suite for high-reliability systems that is designed for field-programmable gate arrays and microprocessors. As a result, we describe the development process and report neutron test data for themore » hardware and software benchmarks.« less

The Effects of Two Different Instructional Programmes on Literacy Skills of Kindergarten Children

ERIC Educational Resources Information Center

Gahwaji, Nahla M.

2016-01-01

Lately, research exploring the effects of tutorial instructional programmes and educational games on literacy skills of kindergarten children has attracted large number of educational technology researchers and practitioners. Even though overwhelming research literature on the subject is available, the majority of this existing work is designed…

Professional Development in Statistics, Technology, and Cognitively Demanding Tasks: Classroom Implementation and Obstacles

ERIC Educational Resources Information Center

Foley, Gregory D.; Khoshaim, Heba Bakr; Alsaeed, Maha; Er, S. Nihan

2012-01-01

Attending professional development programmes can support teachers in applying new strategies for teaching mathematics and statistics. This study investigated (a) the extent to which the participants in a professional development programme subsequently used the techniques they had learned when teaching mathematics and statistics and (b) the…

Computer Programmer/Analyst.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This publication contains 25 subjects appropriate for use in a competency list for the occupation of computer programmer/analyst, 1 of 12 occupations within the business/computer technologies cluster. Each unit consists of a number of competencies; a list of competency builders is provided for each competency. Titles of the 25 units are as…

Introducing Programmable Logic to Undergraduate Engineering Students in a Digital Electronics Course

ERIC Educational Resources Information Center

Todorovich, E.; Marone, J. A.; Vazquez, M.

2012-01-01

Due to significant technological advances and industry requirements, many universities have introduced programmable logic and hardware description languages into undergraduate engineering curricula. This has led to a number of logistical and didactical challenges, in particular for computer science students. In this paper, the integration of some…

How Programme Teams Progress Agricultural Innovation in the Australian Dairy Industry

ERIC Educational Resources Information Center

Nettle, Ruth; Brightling, Pauline; Hope, Anne

2013-01-01

Purpose: This article outlines the emergence of programme teams in the Australian dairy farm sector as a response to counter weaknesses in the institutional environment for agricultural innovation which favours technology adoption/diffusion approaches. Design/methodology/approach: The strengths, weaknesses and risks of different approaches to…

Collaborations, Courses, and Competitions: Developing Entrepreneurship Programmes at UCL

ERIC Educational Resources Information Center

Chapman, David; Skinner, Jeff

2006-01-01

Purpose: This paper aims to detail a range of collaborative programmes developed by University College London (UCL) and the London Business School (LBS). These schemes have been developed to exploit synergies between the two institutions with the aim of promoting entrepreneurship within the fields of science and technology.…

Podcasts Are Not for Everyone

ERIC Educational Resources Information Center

Kazlauskas, Alanah; Robinson, Kathy

2012-01-01

Twenty-first century students are expected to utilise emerging technologies such as lecture podcasts as learning tools. This research explored the uptake of podcasts by undergraduate students enrolled in two very different cognitively challenging subjects in the second year of the nursing programme and in the first year of a business programme.…

VOClient: Application Integration in the Virtual Observatory

NASA Astrophysics Data System (ADS)

Fitzpatrick, Michael J.; Tody, D.

2007-12-01

We present VOClient, a new software package that provides a high-level, easy-to-use, programmable interface between desktop applications and the distributed VO framework, providing access to remote VO data and services, reference implementations for VO data-providers and end-user applications. Applications have traditionally been written to deal directly with local images, catalogs or spectra; VOClient allows these applications to use remote VO data and services without requiring a developer to know the details of the underlying and evolving VO technologies. The programmable interface provides equivalent functionality for a wide variety of both legacy and modern development languages and environments and can be easily extended to add new functionality. The server component of the project provides a reference implementation and toolkit which can be used to build VO data services, and the commandline tools provide ready-to-use applications to access VO data and services from the desktop or scripting environment. The use of VOClient to integrate VO technologies with legacy systems such as IRAF is examined as a case-study, and the use of these techniques in other environments, especially their applicability to legacy code and systems, is also discussed. VOClient is meant both for the astronomer wishing to revive an old and trusted task with new VO capabiities, as well as the institutional project providing data or services to the Virtual Observatory.

Utilizing Internet Technologies in Observatory Control Systems

NASA Astrophysics Data System (ADS)

Cording, Dean

2002-12-01

The 'Internet boom' of the past few years has spurred the development of a number of technologies to provide services such as secure communications, reliable messaging, information publishing and application distribution for commercial applications. Over the same period, a new generation of computer languages have also developed to provide object oriented design and development, improved reliability, and cross platform compatibility. Whilst the business models of the 'dot.com' era proved to be largely unviable, the technologies that they were based upon have survived and have matured to the point were they can now be utilized to build secure, robust and complete observatory control control systems. This paper will describe how Electro Optic Systems has utilized these technologies in the development of its third generation Robotic Observatory Control System (ROCS). ROCS provides an extremely flexible configuration capability within a control system structure to provide truly autonomous robotic observatory operation including observation scheduling. ROCS was built using Internet technologies such as Java, Java Messaging Service (JMS), Lightweight Directory Access Protocol (LDAP), Secure Sockets Layer (SSL), eXtendible Markup Language (XML), Hypertext Transport Protocol (HTTP) and Java WebStart. ROCS was designed to be capable of controlling all aspects of an observatory and be able to be reconfigured to handle changing equipment configurations or user requirements without the need for an expert computer programmer. ROCS consists of many small components, each designed to perform a specific task, with the configuration of the system specified using a simple meta language. The use of small components facilitates testing and makes it possible to prove that the system is correct.

Technological innovation, human capital and social change for sustainability. Lessons learnt from the industrial technologies theme of the EU's Research Framework Programme.

PubMed

Sabadie, Jesús Alquézar

2014-05-15

Europe is facing a twofold challenge. It must maintain or even increase its competitiveness, a basic requirement in a globalised economy and under the current demographic threat. It needs also to tackle the so-called "grand challenges", especially environmental issues, through a sustainable model of production and consumption. Such challenges should lead to new business and industrial models, based on more sustainable production and consumption chains, from design to end of life. This implies a need for new industrial materials and processes, new skills and, indeed, new values and life-styles. Sustainability and innovation are key elements of EU's Research and Innovation Framework Programmes, particularly in the field of industrial technologies (nanotechnologies, materials and industrial technologies), which objective is to "improve the competitiveness of the European industry and generate knowledge to ensure its transformation from a resource intensive to a knowledge intensive industry". Sustainability and innovation are interrelated challenges for R&D. Research can develop technical solutions to tackle environmental or societal challenges, but such technologies need to be successfully commercialised to have a real environmental impact. Several socio-economic studies carried-out by the European Commission show not only the emerging technological and industrial trends, but they also emphasise the need for linking sustainable technologies with social change. Human capital and new social behaviours are critical factors to combine economic competitiveness and sustainability: technology alone is no longer able to solve global challenges. But what kind of human capital (skills, behaviours, and values) are we referring to? How to encourage the shift towards a greener society through human capital? Which reforms are needed in education systems to move towards a sustainable economy? Are there examples of social innovation to be extrapolated and/or generalised? © 2013 Elsevier B.V. All rights reserved.

Mapping evidence of interventions and strategies to bridge the gap in the implementation of the prevention of mother-to-child transmission of HIV programme policy in sub-Saharan countries: A scoping review

PubMed Central

Naidoo, Joanne R.

2017-01-01

Background Prevention of mother-to-child transmission (PMTCT) of HIV is a life-saving public health intervention. Sub-Saharan African (SSA) countries have made significant progress in the programme, but little is known about the strategies used by them to eliminate mother-to-child transmission of HIV. Aim To map evidence of strategies and interventions employed by SSA in bridging the implementation gap in the rapidly changing PMTCT of HIV programme policy. Methods Electronic search of the databases MEDLINE, PubMed and SABINET for articles published in English between 2001 and August 2016. Key words included ‘Sub-Saharan African countries’, ‘implementation strategies’, ‘interventions to bridge implementation gap’, ‘prevention of mother-to-child transmission of HIV’ and ‘closing implementation gap’. Results Of a total of 743 articles, 25 articles that met the inclusion criteria were included in the study. Manual content analysis resulted in the identification of three categories of strategies: (1) health system (referral systems, integration of services, supportive leadership, systematic quality-improvement approaches that vigorously monitors programme performance); (2) health service delivery (task shifting, networking, shared platform for learning, local capacity building, supportive supervision); as well as (3) community-level strategies (community health workers, technology use – mHealth, family-centred approaches, male involvement, culturally appropriate interventions). Conclusion There are strategies that exist in SSA countries. Future research should examine multifaceted scientific models to prioritise the highest impact and be evaluated for effectiveness and efficiency. PMID:28582993

MAP3D: a media processor approach for high-end 3D graphics

NASA Astrophysics Data System (ADS)

Darsa, Lucia; Stadnicki, Steven; Basoglu, Chris

1999-12-01

Equator Technologies, Inc. has used a software-first approach to produce several programmable and advanced VLIW processor architectures that have the flexibility to run both traditional systems tasks and an array of media-rich applications. For example, Equator's MAP1000A is the world's fastest single-chip programmable signal and image processor targeted for digital consumer and office automation markets. The Equator MAP3D is a proposal for the architecture of the next generation of the Equator MAP family. The MAP3D is designed to achieve high-end 3D performance and a variety of customizable special effects by combining special graphics features with high performance floating-point and media processor architecture. As a programmable media processor, it offers the advantages of a completely configurable 3D pipeline--allowing developers to experiment with different algorithms and to tailor their pipeline to achieve the highest performance for a particular application. With the support of Equator's advanced C compiler and toolkit, MAP3D programs can be written in a high-level language. This allows the compiler to successfully find and exploit any parallelism in a programmer's code, thus decreasing the time to market of a given applications. The ability to run an operating system makes it possible to run concurrent applications in the MAP3D chip, such as video decoding while executing the 3D pipelines, so that integration of applications is easily achieved--using real-time decoded imagery for texturing 3D objects, for instance. This novel architecture enables an affordable, integrated solution for high performance 3D graphics.

Prototype architecture for a VLSI level zero processing system. [Space Station Freedom

NASA Technical Reports Server (NTRS)

Shi, Jianfei; Grebowsky, Gerald J.; Horner, Ward P.; Chesney, James R.

1989-01-01

The prototype architecture and implementation of a high-speed level zero processing (LZP) system are discussed. Due to the new processing algorithm and VLSI technology, the prototype LZP system features compact size, low cost, high processing throughput, and easy maintainability and increased reliability. Though extensive control functions have been done by hardware, the programmability of processing tasks makes it possible to adapt the system to different data formats and processing requirements. It is noted that the LZP system can handle up to 8 virtual channels and 24 sources with combined data volume of 15 Gbytes per orbit. For greater demands, multiple LZP systems can be configured in parallel, each called a processing channel and assigned a subset of virtual channels. The telemetry data stream will be steered into different processing channels in accordance with their virtual channel IDs. This super system can cope with a virtually unlimited number of virtual channels and sources. In the near future, it is expected that new disk farms with data rate exceeding 150 Mbps will be available from commercial vendors due to the advance in disk drive technology.

An integrated autonomous rendezvous and docking system architecture using Centaur modern avionics

NASA Technical Reports Server (NTRS)

Nelson, Kurt

1991-01-01

The avionics system for the Centaur upper stage is in the process of being modernized with the current state-of-the-art in strapdown inertial guidance equipment. This equipment includes an integrated flight control processor with a ring laser gyro based inertial guidance system. This inertial navigation unit (INU) uses two MIL-STD-1750A processors and communicates over the MIL-STD-1553B data bus. Commands are translated into load activation through a Remote Control Unit (RCU) which incorporates the use of solid state relays. Also, a programmable data acquisition system replaces separate multiplexer and signal conditioning units. This modern avionics suite is currently being enhanced through independent research and development programs to provide autonomous rendezvous and docking capability using advanced cruise missile image processing technology and integrated GPS navigational aids. A system concept was developed to combine these technologies in order to achieve a fully autonomous rendezvous, docking, and autoland capability. The current system architecture and the evolution of this architecture using advanced modular avionics concepts being pursued for the National Launch System are discussed.

Teaching Sustainable Entrepreneurship to Engineering Students: The Case of Delft University of Technology

ERIC Educational Resources Information Center

Bonnet, Hans; Quist, Jaco; Hoogwater, Daan; Spaans, Johan; Wehrmann, Caroline

2006-01-01

Sustainability, enhancement of personal skills, social aspects of technology, management and entrepreneurship are of increasing concern for engineers and therefore for engineering education. In 1996 at Delft University of Technology this led to the introduction of a subject on sustainable entrepreneurship and technology in the course programmes of…

IEA HPT ANNEX 41 – Cold climate heat pumps: US country report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groll, Eckhard A.; Baxter, Van D.

In 2012 the International Energy Agency (IEA) Heat Pump Programme (now the Heat Pump Technologies (HPT) program) established Annex 41 to investigate technology solutions to improve performance of heat pumps for cold climates. Four IEA HPT member countries are participating in the Annex – Austria, Canada, Japan, and the United States (U.S.). The principal focus of Annex 41 is on electrically driven air-source heat pumps (ASHP) since that system type has the lowest installation cost of all heat pump alternatives. They also have the most significant performance challenges given their inherent efficiency and capacity issues at cold outdoor temperatures. Availabilitymore » of ASHPs with improved low ambient performance would help bring about a much stronger heat pump market presence in cold areas, which today rely predominantly on fossil fuel furnace heating systems.« less

Biomedical technology transfer. Applications of NASA science and technology

NASA Technical Reports Server (NTRS)

Harrison, D. C.

1980-01-01

Ongoing projects described address: (1) intracranial pressure monitoring; (2) versatile portable speech prosthesis; (3) cardiovascular magnetic measurements; (4) improved EMG biotelemetry for pediatrics; (5) ultrasonic kidney stone disintegration; (6) pediatric roentgen densitometry; (7) X-ray spatial frequency multiplexing; (8) mechanical impedance determination of bone strength; (9) visual-to-tactile mobility aid for the blind; (10) Purkinje image eyetracker and stabilized photocoalqulator; (11) neurological applications of NASA-SRI eyetracker; (12) ICU synthesized speech alarm; (13) NANOPHOR: microelectrophoresis instrument; (14) WRISTCOM: tactile communication system for the deaf-blind; (15) medical applications of NASA liquid-circulating garments; and (16) hip prosthesis with biotelemetry. Potential transfer projects include a person-portable versatile speech prosthesis, a critical care transport sytem, a clinical information system for cardiology, a programmable biofeedback orthosis for scoliosis a pediatric long-bone reconstruction, and spinal immobilization apparatus.

A High-Voltage Integrated Circuit Engine for a Dielectrophoresis-based Programmable Micro-Fluidic Processor

PubMed Central

Current, K. Wayne; Yuk, Kelvin; McConaghy, Charles; Gascoyne, Peter R. C.; Schwartz, Jon A.; Vykoukal, Jody V.; Andrews, Craig

2010-01-01

A high-voltage (HV) integrated circuit has been demonstrated to transport droplets on programmable paths across its coated surface. This chip is the engine for a dielectrophoresis (DEP)-based micro-fluidic lab-on-a-chip system. This chip creates DEP forces that move and help inject droplets. Electrode excitation voltage and frequency are variable. With the electrodes driven with a 100V peak-to-peak periodic waveform, the maximum high-voltage electrode waveform frequency is about 200Hz. Data communication rate is variable up to 250kHz. This demonstration chip has a 32×32 array of nominally 100V electrode drivers. It is fabricated in a 130V SOI CMOS fabrication technology, dissipates a maximum of 1.87W, and is about 10.4 mm × 8.2 mm. PMID:23989241

Programmable logic devices

NASA Astrophysics Data System (ADS)

Jacobs, J. L.

1993-04-01

Erasable programmable logic devices (EPLD's) were investigated to determine their advantages and/or disadvantages in Test Equipment Engineering applications. It was found that EPLD's performed as well as or better than identical circuits using standard transistor transistor logic (TTL). The chip count in these circuits was reduced, saving printed circuit board space and shortening fabrication and prove-in time. Troubleshooting circuits of EPLD's was also easier with 10 to 100 times fewer wires needed. The reduced number of integrated circuits (IC's) contributed to faster system speeds and an overall lower power consumption. In some cases changes to the circuit became software changes using EPLD's instead of hardware changes for standard logic. Using EPLD's was fairly easy; however, as with any new technology, a learning curve must be overcome before EPLD's can be used efficiently. The many benefits of EPLD's outweighed this initial inconvenience.

Meeting the future metro network challenges and requirements by adopting programmable S-BVT with direct-detection and PDM functionality

NASA Astrophysics Data System (ADS)

Nadal, Laia; Svaluto Moreolo, Michela; Fàbrega, Josep M.; Vílchez, F. Javier

2017-07-01

In this paper, we propose an advanced programmable sliceable-bandwidth variable transceiver (S-BVT) with polarization division multiplexing (PDM) capability as a key enabler to fulfill the requirements for future 5G networks. Thanks to its cost-effective optoelectronic front-end based on orthogonal frequency division multiplexing (OFDM) technology and direct-detection (DD), the proposed S-BVT becomes suitable for next generation highly flexible and scalable metro networks. Polarization beam splitters (PBSs) and controllers (PCs), available on-demand, are included at the transceivers and at the network nodes, further enhancing the system flexibility and promoting an efficient use of the spectrum. 40G-100G PDM transmission has been experimentally demonstrated, within a 4-node photonic mesh network (ADRENALINE testbed), implementing a simplified equalization process.

ExoMars Raman laser spectrometer breadboard overview

NASA Astrophysics Data System (ADS)

Díaz, E.; Moral, A. G.; Canora, C. P.; Ramos, G.; Barcos, O.; Prieto, J. A. R.; Hutchinson, I. B.; Ingley, R.; Colombo, M.; Canchal, R.; Dávila, B.; Manfredi, J. A. R.; Jiménez, A.; Gallego, P.; Pla, J.; Margoillés, R.; Rull, F.; Sansano, A.; López, G.; Catalá, A.; Tato, C.

2011-10-01

The Raman Laser Spectrometer (RLS) is one of the Pasteur Payload instruments, within the ESA's Aurora Exploration Programme, ExoMars mission. The RLS Instrument will perform Raman spectroscopy on crushed powdered samples deposited on a small container after crushing the cores obtained by the Rover's drill system. In response to ESA requirements for delta-PDR to be held in mid 2012, an instrument BB programme has been developed, by RLS Assembly Integration and Verification (AIV) Team to achieve the Technology Readiness level 5 (TRL5), during last 2010 and whole 2011. Currently RLS instrument is being developed pending its CoDR (Conceptual Design Revision) with ESA, in October 2011. It is planned to have a fully operative breadboard, conformed from different unit and sub-units breadboards that would demonstrate the end-to-end performance of the flight representative units by 2011 Q4.

Leading a change process to improve health service delivery.

PubMed Central

Bahamon, Claire; Dwyer, Joseph; Buxbaum, Ann

2006-01-01

In the fields of health and development, donors channel multiple resources into the design of new practices and technologies, as well as small-scale programmes to test them. But successful practices are rarely scaled up to the level where they beneficially impact large, impoverished populations. An effective process for change is to use the experiences of new practices gained at the programme level for full-scale implementation. To make an impact, new practices need to be applied, and supported by management systems, at many organizational levels. At every level, potential implementers and likely beneficiaries must first recognize some characteristics that would benefit them in the new practices. An effective change process, led by a dedicated internal change agent, comprises several well-defined phases that successively broaden and institutionalize the use of new practices. PMID:16917654

Wireless Control of Miniaturized Mobile Vehicle for Indoor Surveillance

NASA Astrophysics Data System (ADS)

Taha Saquib, Syed M.; Hameed, Sarmad; Usman Ali, Syed M.; Jafri, Raza; Amin, Imran

2013-12-01

This work is based upon electronic automation and Smart Control techniques, which constitute the basis of Control Area Network (CAN) and Personal Area Network (PAN). Bluetooth technology has been interfaced with a programmable controller to provide multi-dimensional vehicle control. A network is proposed which contains a remote, mobile host controller and an android operating system based mobile set (Client). The client communicates with a host controller through a Bluetooth device. The system incorporates duplex communication after successful confirmation between the host and the client; the android based mobile unit controls the vehicle through the Bluetooth module.

Programmable spectral engine design of hyperspectral image projectors based on digital micro-mirror device (DMD)

NASA Astrophysics Data System (ADS)

Wang, Xicheng; Gao, Jiaobo; Wu, Jianghui; Li, Jianjun; Cheng, Hongliang

2017-02-01

Recently, hyperspectral image projectors (HIP) have been developed in the field of remote sensing. For the advanced performance of system-level validation, target detection and hyperspectral image calibration, HIP has great possibility of development in military, medicine, commercial and so on. HIP is based on the digital micro-mirror device (DMD) and projection technology, which is capable to project arbitrary programmable spectra (controlled by PC) into the each pixel of the IUT1 (instrument under test), such that the projected image could simulate realistic scenes that hyperspectral image could be measured during its use and enable system-level performance testing and validation. In this paper, we built a visible hyperspectral image projector also called the visible target simulator with double DMDs, which the first DMD is used to product the selected monochromatic light from the wavelength of 410 to 720 um, and the light come to the other one. Then we use computer to load image of realistic scenes to the second DMD, so that the target condition and background could be project by the second DMD with the selected monochromatic light. The target condition can be simulated and the experiment could be controlled and repeated in the lab, making the detector instrument could be tested in the lab. For the moment, we make the focus on the spectral engine design include the optical system, research of DMD programmable spectrum and the spectral resolution of the selected spectrum. The detail is shown.

Integration of digital signal processing technologies with pulsed electron paramagnetic resonance imaging

PubMed Central

Pursley, Randall H.; Salem, Ghadi; Devasahayam, Nallathamby; Subramanian, Sankaran; Koscielniak, Janusz; Krishna, Murali C.; Pohida, Thomas J.

2006-01-01

The integration of modern data acquisition and digital signal processing (DSP) technologies with Fourier transform electron paramagnetic resonance (FT-EPR) imaging at radiofrequencies (RF) is described. The FT-EPR system operates at a Larmor frequency (Lf) of 300 MHz to facilitate in vivo studies. This relatively low frequency Lf, in conjunction with our ~10 MHz signal bandwidth, enables the use of direct free induction decay time-locked subsampling (TLSS). This particular technique provides advantages by eliminating the traditional analog intermediate frequency downconversion stage along with the corresponding noise sources. TLSS also results in manageable sample rates that facilitate the design of DSP-based data acquisition and image processing platforms. More specifically, we utilize a high-speed field programmable gate array (FPGA) and a DSP processor to perform advanced real-time signal and image processing. The migration to a DSP-based configuration offers the benefits of improved EPR system performance, as well as increased adaptability to various EPR system configurations (i.e., software configurable systems instead of hardware reconfigurations). The required modifications to the FT-EPR system design are described, with focus on the addition of DSP technologies including the application-specific hardware, software, and firmware developed for the FPGA and DSP processor. The first results of using real-time DSP technologies in conjunction with direct detection bandpass sampling to implement EPR imaging at RF frequencies are presented. PMID:16243552

Towards a sustainable livestock production in developing countries and the importance of animal health strategy therein.

PubMed

Kaasschieter, G A; de Jong, R; Schiere, J B; Zwart, D

1992-04-01

Livestock and animal health development projects have not always led to substantial increases in animal productivity or in farmers' welfare. Some have even resulted in unsustainable systems, when they were not based on an understanding of (livestock) production systems. The multipurpose functions of livestock and complex relationships between the biological, technical and social components require a systems approach, whereby nutrition, animal health, breeding, biotechnology knowhow, inputs and technologies are used to optimise resource use. The challenge for developed and developing countries is to reverse the current degradation of the environment, and arrive at sustainable increases in crop and livestock production to secure present and future food supplies. For rural development, governments should show long term commitment and political will to support the rural population in development programmes, because smallholders (including women and landless livestock keepers) represent a large labour force in developing countries. Different systems need different approaches. Pastoral systems must focus on effective management of grazing pressure of the rangelands. Communal rangelands management involves not only the development and application of technologies (e.g. feedlots, vaccination campaigns), but also land tenure policies, institutional development, economic return and a reduction in the number of people depending upon livestock. Smallholder mixed farms must aim at intensification of the total production system, in which external inputs are indispensable, but with the emphasis on optimum input-output relationships by reducing resource losses due to poor management. Resource-poor farming systems must aim at the improved management of the various livestock species in backyards and very small farms, and proper packages for cattle, buffaloes, sheep, goats, rabbits and poultry should be developed. Specialised commercial livestock farming systems (poultry, pigs, dairy or meat) can only be sustainable with adequate marketing, supply of quality feed, veterinary services, labour, management and control of pollution. Animal health programmes play a keyrole in the proposed system approach.

JUST in time health emergency interventions: an innovative approach to training the citizen for emergency situations using virtual reality techniques and advanced IT tools (the VR Tool).

PubMed

Manganas, A; Tsiknakis, M; Leisch, E; Ponder, M; Molet, T; Herbelin, B; Magnetat-Thalmann, N; Thalmann, D; Fato, M; Schenone, A

2004-01-01

This paper reports the results of the second of the two systems developed by JUST, a collaborative project supported by the European Union under the Information Society Technologies (IST) Programme. The most innovative content of the project has been the design and development of a complementary training course for non-professional health emergency operators, which supports the traditional learning phase, and which purports to improve the retention capability of the trainees. This was achieved with the use of advanced information technology techniques, which provide adequate support and can help to overcome the present weaknesses of the existing training mechanisms.

Digital MOS integrated circuits

NASA Astrophysics Data System (ADS)

Elmasry, M. I.

MOS in digital circuit design is considered along with aspects of digital VLSI, taking into account a comparison of MOSFET logic circuits, 1-micrometer MOSFET VLSI technology, a generalized guide for MOSFET miniaturization, processing technologies, novel circuit structures for VLSI, and questions of circuit and system design for VLSI. MOS memory cells and circuits are discussed, giving attention to a survey of high-density dynamic RAM cell concepts, one-device cells for dynamic random-access memories, variable resistance polysilicon for high density CMOS Ram, high performance MOS EPROMs using a stacked-gate cell, and the optimization of the latching pulse for dynamic flip-flop sensors. Programmable logic arrays are considered along with digital signal processors, microprocessors, static RAMs, and dynamic RAMs.

Review on the EFDA programme on tungsten materials technology and science

NASA Astrophysics Data System (ADS)

Rieth, M.; Boutard, J. L.; Dudarev, S. L.; Ahlgren, T.; Antusch, S.; Baluc, N.; Barthe, M.-F.; Becquart, C. S.; Ciupinski, L.; Correia, J. B.; Domain, C.; Fikar, J.; Fortuna, E.; Fu, C.-C.; Gaganidze, E.; Galán, T. L.; García-Rosales, C.; Gludovatz, B.; Greuner, H.; Heinola, K.; Holstein, N.; Juslin, N.; Koch, F.; Krauss, W.; Kurzydlowski, K. J.; Linke, J.; Linsmeier, Ch.; Luzginova, N.; Maier, H.; Martínez, M. S.; Missiaen, J. M.; Muhammed, M.; Muñoz, A.; Muzyk, M.; Nordlund, K.; Nguyen-Manh, D.; Norajitra, P.; Opschoor, J.; Pintsuk, G.; Pippan, R.; Ritz, G.; Romaner, L.; Rupp, D.; Schäublin, R.; Schlosser, J.; Uytdenhouwen, I.; van der Laan, J. G.; Veleva, L.; Ventelon, L.; Wahlberg, S.; Willaime, F.; Wurster, S.; Yar, M. A.

2011-10-01

All the recent DEMO design studies for helium cooled divertors utilize tungsten materials and alloys, mainly due to their high temperature strength, good thermal conductivity, low erosion, and comparably low activation under neutron irradiation. The long-term objective of the EFDA fusion materials programme is to develop structural as well as armor materials in combination with the necessary production and fabrication technologies for future divertor concepts. The programmatic roadmap is structured into four engineering research lines which comprise fabrication process development, structural material development, armor material optimization, and irradiation performance testing, which are complemented by a fundamental research programme on "Materials Science and Modeling". This paper presents the current research status of the EFDA experimental and testing investigations, and gives a detailed overview of the latest results on fabrication, joining, high heat flux testing, plasticity, modeling, and validation experiments.

In eHealth in India today, the nature of work, the challenges and the finances: an interview-based study

PubMed Central

2014-01-01

Background India is a country with vast unmet medical needs. eHealth has the potential to improve the quality of health care and reach the unreached. We have sought to understand the kinds of eHealth programmes being offered in India today, the challenges they face and the nature of their financing. Methods We have adopted an interview-based methodology. The 30 interviews represent 28 organizations, and include designers, implementers, evaluators and technology providers for eHealth programmes. Results A range of programmes is being run, including point-of-care in rural and urban areas, treatment compliance, data collection and disease surveillance, and distant medical education. Most programmes provide point-of-care to patients or other beneficiaries in rural areas. Technology is not a limiting factor but the unavailability of suitable health personnel is a major challenge, especially in rural areas. We have identified a few factors that help this situation. Financial sustainability is also a concern for most programmes, which have rarely been scaled up. There are recent for-profit efforts in urban areas, but no reliable business model has been identified yet. Government facilities have not been very effective in eHealth on their own, but collaborations between the government and non-profit (in particular) and for-profit organisations have led to impactful programmes. Conclusions It is unlikely that eHealth will have widespread and sustainable impact without government involvement, especially in rural areas. Nevertheless, programmes run solely by the government are unlikely to be the most effective. PMID:24387627

The Expert System Programme of the European Space Agency

NASA Astrophysics Data System (ADS)

Lafay, J. F.; Allard, F.

1992-08-01

ESA's Expert System Demonstration (ESD) program is discussed in terms of its goals, structure, three-phase approach, and initial results. ESD is intended to demonstrate the benefits of AI and knowledge-based systems for in-orbit infrastructures by developing a strategic technology to contribute to ESA missions. Three phases were defined for: (1) program definition and review of existing work; (2) demonstration of applications prototypes; and (3) the development of operational systems from successful prototypes. Applications of 16 proposed expert-system candidates are grouped into payload-engineering and crew/operations categories. The candidates are to be evaluated in terms of their potential contribution to strategic goals such as improving scientific return and automating operator functions to eliminate human error.

Radar targets reveal all to automated tester

NASA Astrophysics Data System (ADS)

Hartman, R. E.

1985-09-01

Technological developments in the field of automated test equipment for low radar-cross-section (RCS) systems are reviewed. Emphasis is given to an Automated Digital Analysis and Measurement (ADAM) system for measuring, scattering, and evaluating RCS using a minicomputer in combination with a vector network analyzer and a positioner programmer. ADAM incorporates a stepped CW measurement technique to obtain RCS as a function of both range and frequency at a fixed aspect angle. The operating characteristics and calibration procedures of the ADAM system are described and estimates of RCS sensitivity are obtained. The response resolution of the ADAM system is estimated to be 36 cm per measurement bandwidth (in GHz) for a minimum window. A block diagram of the error checking routine of the ADAM system is provided.

Park Smart

NASA Technical Reports Server (NTRS)

1999-01-01

The Parking Garage Automation System (PGAS) is based on a technology developed by a NASA-sponsored project called Robot sensorSkin(TM). Merritt Systems, Inc., of Orlando, Florida, teamed up with NASA to improve robots working with critical flight hardware at Kennedy Space Center in Florida. The system, containing smart sensor modules and flexible printed circuit board skin, help robots to steer clear of obstacles using a proximity sensing system. Advancements in the sensor designs are being applied to various commercial applications, including the PGAS. The system includes a smartSensor(TM) network installed around and within public parking garages to autonomously guide motorists to open facilities, and once within, to free parking spaces. The sensors use non-invasive reflective-ultrasonic technology for high accuracy, high reliability, and low maintenance. The system is remotely programmable: it can be tuned to site-specific requirements, has variable range capability, and allows remote configuration, monitoring, and diagnostics. The sensors are immune to interference from metallic construction materials, such as rebar and steel beams. Inside the garage, smart routing signs mounted overhead or on poles in front of each row of parking spots guide the motorist precisely to free spaces.

Factors affecting commercial application of embryo technologies in dairy cattle in Europe--a modelling approach.

PubMed

van Arendonk, Johan A M; Bijma, Piter

2003-01-15

Reproductive techniques have a major impact on the structure of breeding programmes, the rate of genetic gain and dissemination of genetic gain in populations. This manuscript reviews the impact of reproductive technologies on the underlying components of genetic gain and inbreeding with special reference to the role of female reproductive technology. Evaluation of alternative breeding schemes should be based on genetic gain while constraining inbreeding. Optimum breeding schemes can be characterised by: decreased importance of sib information; increased accuracy at the expense of intensity; and a factorial mating strategy. If large-scale embryo cloning becomes feasible, this will have a small impact on the rate of genetic gain but will have a large impact on the structure of breeding programmes.

Collaboration -- A Key Principle in Distance Education

ERIC Educational Resources Information Center

Kennedy, David; Duffy, Tim

2004-01-01

The University of Paisley has been supporting distance learning students on online supported courses for nine years. Its largest programme in this form is the B.Sc. Health Studies degree for health professionals. The delivery of this programme is dependent on the use of information and communications technology. But the essential ingredient for…

Improving Student Learning in Calculus through Applications

ERIC Educational Resources Information Center

Young, C. Y.; Georgiopoulos, M.; Hagen, S. C.; Geiger, C. L.; Dagley-Falls, M. A.; Islas, A. L.; Ramsey, P. J.; Lancey, P. M.; Straney, R. A.; Forde, D. S.; Bradbury, E. E.

2011-01-01

Nationally only 40% of the incoming freshmen Science, Technology, Engineering and Mathematics (STEM) majors are successful in earning a STEM degree. The University of Central Florida (UCF) EXCEL programme is a National Science Foundation funded STEM Talent Expansion Programme whose goal is to increase the number of UCF STEM graduates. One of the…

IFLA General Conference, 1986. Management and Technology Division. Section: Conservation. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions, The Hague (Netherlands).

This document contains three papers on conservation which were presented at the 1986 International Federation of Library Associations (IFLA) conference. In "The IFLA Conservation Section and the Core Programme for Preservation (PAC)," David W. G. Clements of the United Kingdom outlines the background of the Core Programme on Preservation…

Multiprog Virtual Laboratory Applied to PLC Programming Learning

ERIC Educational Resources Information Center

Shyr, Wen-Jye

2010-01-01

This study develops a Multiprog virtual laboratory for a mechatronics education designed to teach how to programme a programmable logic controller (PLC). The study was carried out with 34 students in the Department of Industry Education and Technology at National Changhua University of Education in Taiwan. In total, 17 students were assigned to…

Matching Learning Style Preferences with Suitable Delivery Methods on Textile Design Programmes

ERIC Educational Resources Information Center

Sayer, Kate; Studd, Rachel

2006-01-01

Textile design is a subject that encompasses both design and technology; aesthetically pleasing patterns and forms must be set within technical parameters to create successful fabrics. When considering education methods in design programmes, identifying the most relevant learning approach is key to creating future successes. Yet are the most…

Guidelines towards the Facilitation of Interactive Online Learning Programmes in Higher Education

ERIC Educational Resources Information Center

Mbati, Lydia; Minnaar, Ansie

2015-01-01

The creation of online platforms that establish new learning environments has led to the proliferation of institutions offering online learning programmes. However, the use of technologies for teaching and learning requires sound content specialization, as well as grounding in pedagogy. While gains made by constructivism and observational learning…

The Impact of Providing Unlimited Access to Programmable Boards in Digital Design Education

ERIC Educational Resources Information Center

Radu, M. E.; Cole, C.; Dabacan, M. A.; Harris, J.; Sexton, S.

2011-01-01

This paper presents the benefits and costs of providing students with unlimited access to programmable boards in digital design education, allowing hands-on experiences outside traditional laboratory settings. Studies were conducted at three universities in two different countries--Rose Hulman Institute of Technology, Terre Haute, IN; Washington…

Inexpensive Miniature Programmable Magnetic Stirrer from Reconfigured Computer Parts

ERIC Educational Resources Information Center

Mercer, Conan; Leech, Donal

2017-01-01

This technology report outlines a robust and easy to assemble magnetic stirrer that is programmable. All of the parts are recycled from obsolete computer hardware except the Arduino microcontroller and motor driver, at a total cost of around $40. This multidisciplinary approach introduces microcontrollers to students and grants the opportunity to…

Mentoring Partnerships in a Community Technology Centre: A Constructionist Approach for Fostering Equitable Service Learning

ERIC Educational Resources Information Center

Kafai, Yasmin B.; Desai, Shiv; Peppler, Kylie A.; Chiu, Grace M.; Moya, Jesse

2008-01-01

Mentoring programmes have gained increasing popularity in institutions of higher education to support undergraduates in community service or outreach efforts. Many of these programmes partner mentors with inner-city youth, providing assistance in underserved communities while mentors gain experiences that connect theory and practice. Here we…

Applying Information and Communication Technologies to Language Teaching and Research: An Overview

ERIC Educational Resources Information Center

Pareja-Lora, Antonio; Rodríguez-Arancón, Pilar; Calle-Martínez, Cristina

2016-01-01

Currently, there is an international change in education that includes the development of new learning programmes and policies, such as (a) bilingual education programmes, (b) the Bologna process, with an emphasis on a more autonomous way of learning, or (c) the systematic evaluation and assessment of students and educational results. These…

Making Sense of Curriculum--The Transition into Science and Engineering University Programmes

ERIC Educational Resources Information Center

Ulriksen, Lars; Holmegaard, Henriette T.; Madsen, Lene Møller

2017-01-01

Research on students' transition, retention and experiences in science, technology, engineering and mathematics (STEM) has increasingly focused on identity formation and on students' integration in the study programmes. However, studies focusing on the role of the curriculum in this process at the level of higher education are scarce. The present…

Entrepreneurship for Bioscience Researchers: A Case Study of an Entrepreneurship Programme

ERIC Educational Resources Information Center

Heinonen, Jarna; Poikkijoki, Sari-Anne; Vento-Vierikko, Irma

2007-01-01

Entrepreneurship is reaching new areas in which the concept of business is more or less unfamiliar and remote. This study focuses on a specific entrepreneurship education programme in the fields of chemistry, physics, information technology and bioinformatics, life sciences and medicine development. The aim is to gain a deeper understanding of the…

Technological Self-Efficacy among School Leaders in Oman: A Preliminary Study

ERIC Educational Resources Information Center

Al-Harthi, Aisha Salim Ali

2017-01-01

There is more need today for school leaders to be up-to-date with technology and its various uses in education. Enhancing self-efficacy in the use of technology is an expected role of educational leadership preparation programmes. This study investigated technological self-efficacy of a group of educators in leadership positions while…

A Programmable Microkernel for Real-Time Systems

DTIC Science & Technology

2003-06-01

A Programmable Microkernel for Real - Time Systems Christoph M. Kirsch Thomas A. Henzinger Marco A.A. Sanvido Report No. UCB/CSD-3-1250 June 2003...TITLE AND SUBTITLE A Programmable Microkernel for Real - Time Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S...THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 A Programmable Microkernel for Real - Time Systems ∗ Christoph M

Modernizing the Mobility Air Force for Tomorrow’s Air Traffic Management System

DTIC Science & Technology

2012-01-01

Decision Support System GLONASS Global’naya Navigatsionnaya Sputnikovaya Sistema [Global Navigation Satellite System] GPS Global Positioning System HF high...spreadsheet, November 2009. Eurocontrol, “Link 2000+ Programme: Frequently Asked Questions,” web page, undated(a). As of June 5, 2012: http...www.eurocontrol.int/faq/link2000 ———, “Link 2000+ Programme,” web page, undated(b). As of June 5, 2012: http://www.eurocontrol.int/programmes/link-2000-programme

A CDMA system implementation with dimming control for visible light communication

NASA Astrophysics Data System (ADS)

Chen, Danyang; Wang, Jianping; Jin, Jianli; Lu, Huimin; Feng, Lifang

2018-04-01

Visible light communication (VLC), using solid-state lightings to transmit information, has become a complement technology to wireless radio communication. As a realistic multiple access scheme for VLC system, code division multiple access (CDMA) has attracted more and more attentions in recent years. In this paper, we address and implement an improved CDMA scheme for VLC system. The simulation results reveal that the improved CDMA scheme not only supports multi-users' transmission but also maintains dimming value at about 50% and enhances the system efficiency. It can also realize the flexible dimming control by adjusting some parameters of system structure, which rarely affects the system BER performance. A real-time experimental VLC system with improved CDMA scheme is performed based on field programmable gate array (FPGA), reaching a good BER performance.

Addressing System Reconfiguration and Incremental Integration within IMA Systems

NASA Astrophysics Data System (ADS)

Ferrero, F.; Rodríques, A. I.

2009-05-01

Recently space industry is paying special attention to Integrated Modular Avionics (IMA) systems due to the benefits that modular concepts could bring to the development of space applications, especially in terms of interoperability, flexibility and software reuse. Two important IMA goals to be highlighted are system reconfiguration, and incremental integration of new functionalities into a pre-existing system. The purpose of this paper is to show how system reconfiguration is conducted based on Allied Standard Avionics Architecture Council (ASAAC) concepts for IMA Systems. Besides, it aims to provide a proposal for addressing the incremental integration concept supported by our experience gained during European Technology Acquisition Program (ETAP) TDP1.7 programme. All these topics will be discussed taking into account safety issues and showing the blueprint as an appropriate technique to support these concepts.

Optoelectrofluidic platforms for chemistry and biology.

PubMed

Hwang, Hyundoo; Park, Je-Kyun

2011-01-07

Extraordinary advances in lab on a chip systems have been made on the basis of the development of micro/nanofluidics and its fusion with other technologies based on electrokinetics and optics. Optoelectrofluidic technology, which has been recently introduced as a new manipulation scheme, allows programmable manipulation of particles or fluids in microenvironments based on optically induced electrokinetics. Herein, the behaviour of particles or fluids can be controlled by inducing or perturbing electric fields on demand in an optical manner, which includes photochemical, photoconductive, and photothermal effects. This elegant scheme of the optoelectrofluidic platform has attracted attention in various fields of science and engineering. A lot of research on optoelectrofluidic manipulation technologies has been reported and the field has advanced rapidly, although some technical hurdles still remain. This review describes recent developments and future perspectives of optoelectrofluidic platforms for chemical and biological applications.

Unesco's Global Ethics Observatory

PubMed Central

Have, H ten; Ang, T W

2007-01-01

The Global Ethics Observatory, launched by the United Nations Educational, Scientific, and Cultural Organization in December 2005, is a system of databases in the ethics of science and technology. It presents data on experts in ethics, on institutions (university departments and centres, commissions, councils and review boards, and societies and associations) and on teaching programmes in ethics. It has a global coverage and will be available in six major languages. Its aim is to facilitate the establishment of ethical infrastructures and international cooperation all around the world. PMID:17209103

Parallel algorithm for computation of second-order sequential best rotations

NASA Astrophysics Data System (ADS)

Redif, Soydan; Kasap, Server

2013-12-01

Algorithms for computing an approximate polynomial matrix eigenvalue decomposition of para-Hermitian systems have emerged as a powerful, generic signal processing tool. A technique that has shown much success in this regard is the sequential best rotation (SBR2) algorithm. Proposed is a scheme for parallelising SBR2 with a view to exploiting the modern architectural features and inherent parallelism of field-programmable gate array (FPGA) technology. Experiments show that the proposed scheme can achieve low execution times while requiring minimal FPGA resources.

Towards a Pre-Service Technology Teacher Education Resource for New Zealand

ERIC Educational Resources Information Center

Forret, Michael; Fox-Turnbull, Wendy; Granshaw, Bruce; Harwood, Cliff; Miller, Angela; O'Sullivan, Gary; Patterson, Moira

2013-01-01

The Pre-service Technology Teacher Education Resource (PTTER) was developed as a cross-institutional resource to support the development of initial technology teacher education programmes in New Zealand. The PTTER was developed through collaboration involving representatives from each of the six New Zealand university teacher education providers,…

Agriculture and Biology Teaching. Science and Technology Education Document Series 11.

ERIC Educational Resources Information Center

Rao, A. N.; Pritchard, Alan J.

The six-chapter document is part of Unesco's Science and Technology Education Programme to encourage an international exchange of ideas and information on science and technology education. Chapters discuss: (1) development of agriculture (beginning and modern); (2) agroecosystems (land utilization, soils, food production, irrigation, and…

Technology as Mediation Tool for Improving Teaching Profession in Higher Education Practices

ERIC Educational Resources Information Center

Altinay-Gazi, Zehra; Altinay-Aksal, Fahriye

2017-01-01

Technology became a mediation tool for forming information and developing skills is teacher education programs of higher education institutions because technological tools can be used for self-reflection of prospective teachers' teaching performances. Practical implementation of teacher education programmes is a part of quality indicator in higher…

Viability of Welfare Technology in Mass Technical Literacy Programme

ERIC Educational Resources Information Center

Achintya; Prabha, Manish

2009-01-01

Each developing country should be encouraged to identify its own priorities and develop welfare technology mobilizing its own natural and human resources and should not unnecessarily imitate the stereotyped technologies from the developed countries. The existing curriculum has to be updated and strengthened to include the concept of welfare…

Study Programmes for Engineers from Developing Countries at the Norwegian Institute of Technology.

ERIC Educational Resources Information Center

Lasson, Axel; Hermansen, John

1989-01-01

Describes the background of the study and fellowship programs for graduates from the developing countries at the Norwegian Institute of Technology. Discusses some experiences with the programs. Includes a brief description of five courses: (1) "Pulp and Paper Technology"; (2) "Marine Civil Engineering"; (3) "Hydropower…

Advanced energy systems and technologies - National R and D programme

NASA Astrophysics Data System (ADS)

Lund, P. D.

1992-08-01

The energy R and D in Finland is accomplished through the energy research programs of the Ministry of Trade and Industry. Today there are some 12 R and D programs in operation covering the various aspects of the energy sector. The NEMO-program deals with advanced new energy technologies and systems. The NEMO-program was launched in 1988 and it ends at the end of 1992. Helsinki University of Technology has been responsible for the coordination and most of the universities, research centers, and companies on new advanced energy technologies have been involved in the realization of NEMO. The objectives of the program have been to assess the potential of new technologies in the Finnish energy supply system, encourage and support businesses, and to create necessary research tradition in Finland. At the beginning in year 1988, several new technologies were included, but as the knowledge has increased, focusing on the most promising fields has taken place. Wind and solar energy show the best promises in respect to business activities and possibilities for utilization in Finland. Energy storage some other advanced technologies such as fuel cells and hydrogen technologies represented in the NEMO-program have an important role, but the commercial applications lie more distant in the future. The NEMO-program has reached its objectives. The international evaluation in fall 1990 gave very positive feedback and the scientific quality of the work was found good. At the same time, the contents was still focused more on commercial applications to support national industries in the field. The descriptions of the ongoing NEMO research projects are included in this report.

Our bodies are our own: resistance to ABC-based HIV-prevention programmes in northern Tanzanian conservation organisations.

PubMed

Reid-Hresko, John

2014-01-01

ABC-based HIV-prevention programmes have been widely employed in northern Tanzanian wildlife conservation settings in an attempt to (re)shape the sexual behaviours of conservation actors. Utilising findings from 66 semi-structured interviews conducted in 2009-2010, this paper examines ABC prevention as a form of Foucauldian governmentality--circulating technologies of power that mobilise disciplinary technologies and attempt to transform such efforts into technologies of the self--and explores how individuals understand and respond to attempts to govern their behaviour. ABC regimes attempt to rework subjectivity, positioning HIV-related behaviours within a risk-based neoliberal rationality. However, efforts to use ABC as a technology to govern populations and individual bodies are largely incommensurate with existing Tanzanian sociocultural formations, including economic and gendered inequalities, and local understandings of sexuality. The language research participants used to talk about ABC and the justifications they offered for non-compliance illuminate this discrepancy. Data reveal that the recipients of ABC campaigns are active producers of understandings that work for them in their lives, but may not produce the behavioural shifts envisioned by programme goals. These findings corroborate previous research, which questions the continued plausibility of ABC as a stand-alone HIV- prevention framework.

Programmable lab-on-a-chip system for single cell analysis

NASA Astrophysics Data System (ADS)

Thalhammer, S.

2009-05-01

The collection, selection, amplification and detection of minimum genetic samples became a part of everyday life in medical and biological laboratories, to analyze DNA-fragments of pathogens, patient samples and traces on crime scenes. About a decade ago, a handful of researchers began discussing an intriguing idea. Could the equipment needed for everyday chemistry and biology procedures be shrunk to fit on a chip in the size of a fingernail? Miniature devices for, say, analysing DNA and proteins should be faster and cheaper than conventional versions. Lab-on-a-chip is an advanced technology that integrates a microfluidic system on a microscale chip device. The "laboratory" is created by means of channels, mixers, reservoirs, diffusion chambers, integrated electrodes, pumps, valves and more. With lab-ona- chip technology, complete laboratories on a square centimetre can be created. Here, a multifunctional programmable Lab-on-a-Chip driven by nanofluidics and controlled by surface acoustic waves (SAW) is presented. This system combines serial DNA-isolation-, amplification- and array-detection-process on a modified glass-platform. The fluid actuation is controlled via SAW by interdigital transducers implemented in the chemical modified chip surface. The chemical surface modification allows fluid handling in the sub-microliter range. Minute amount of sample material is extracted by laser-based microdissection out of e.g. histological sections at the single cell level. A few picogram of genetic material are isolated and transferred via a low-pressure transfer system (SPATS) onto the chip. Subsequently the genetic material inside single droplets, which behave like "virtual" beaker, is transported to the reaction and analysis centers on the chip surface via surface acoustic waves, mainly known as noise dumping filters in mobile phones. At these "biological reactors" the genetic material is processed, e.g. amplified via polymerase chain reaction methods, and genetically characterized.

Recent advances in the use of ZFN-mediated gene editing for human gene therapy.

PubMed

Chandrasegaran, Srinivasan

2017-01-01

Targeted genome editing with programmable nucleases has revolutionized biomedical research. The ability to make site-specific modifications to the human genome, has invoked a paradigm shift in gene therapy. Using gene editing technologies, the sequence in the human genome can now be precisely engineered to achieve a therapeutic effect. Zinc finger nucleases (ZFNs) were the first programmable nucleases designed to target and cleave custom sites. This article summarizes the advances in the use of ZFN-mediated gene editing for human gene therapy and discusses the challenges associated with translating this gene editing technology into clinical use.

Radiation Hardened Electronics for Extreme Environments

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Watson, Michael D.

2007-01-01

The Radiation Hardened Electronics for Space Environments (RHESE) project consists of a series of tasks designed to develop and mature a broad spectrum of radiation hardened and low temperature electronics technologies. Three approaches are being taken to address radiation hardening: improved material hardness, design techniques to improve radiation tolerance, and software methods to improve radiation tolerance. Within these approaches various technology products are being addressed including Field Programmable Gate Arrays (FPGA), Field Programmable Analog Arrays (FPAA), MEMS Serial Processors, Reconfigurable Processors, and Parallel Processors. In addition to radiation hardening, low temperature extremes are addressed with a focus on material and design approaches.

Improving the Slum Planning Through Geospatial Decision Support System

NASA Astrophysics Data System (ADS)

Shekhar, S.

2014-11-01

In India, a number of schemes and programmes have been launched from time to time in order to promote integrated city development and to enable the slum dwellers to gain access to the basic services. Despite the use of geospatial technologies in planning, the local, state and central governments have only been partially successful in dealing with these problems. The study on existing policies and programmes also proved that when the government is the sole provider or mediator, GIS can become a tool of coercion rather than participatory decision-making. It has also been observed that local level administrators who have adopted Geospatial technology for local planning continue to base decision-making on existing political processes. In this juncture, geospatial decision support system (GSDSS) can provide a framework for integrating database management systems with analytical models, graphical display, tabular reporting capabilities and the expert knowledge of decision makers. This assists decision-makers to generate and evaluate alternative solutions to spatial problems. During this process, decision-makers undertake a process of decision research - producing a large number of possible decision alternatives and provide opportunities to involve the community in decision making. The objective is to help decision makers and planners to find solutions through a quantitative spatial evaluation and verification process. The study investigates the options for slum development in a formal framework of RAY (Rajiv Awas Yojana), an ambitious program of Indian Government for slum development. The software modules for realizing the GSDSS were developed using the ArcGIS and Community -VIZ software for Gulbarga city.

On Representative Spaceflight Instrument and Associated Instrument Sensor Web Framework

NASA Technical Reports Server (NTRS)

Kizhner, Semion; Patel, Umeshkumar; Vootukuru, Meg

2007-01-01

Sensor Web-based adaptation and sharing of space flight mission resources, including those of the Space-Ground and Control-User communication segment, could greatly benefit from utilization of heritage Internet Protocols and devices applied for Spaceflight (SpaceIP). This had been successfully demonstrated by a few recent spaceflight experiments. However, while terrestrial applications of Internet protocols are well developed and understood (mostly due to billions of dollars in investments by the military and industry), the spaceflight application of Internet protocols is still in its infancy. Progress in the developments of SpaceIP-enabled instrument components will largely determine the SpaceIP utilization of those investments and acceptance in years to come. Likewise SpaceIP, the development of commercial real-time and instrument colocated computational resources, data compression and storage, can be enabled on-board a spacecraft and, in turn, support a powerful application to Sensor Web-based design of a spaceflight instrument. Sensor Web-enabled reconfiguration and adaptation of structures for hardware resources and information systems will commence application of Field Programmable Arrays (FPGA) and other aerospace programmable logic devices for what this technology was intended. These are a few obvious potential benefits of Sensor Web technologies for spaceflight applications. However, they are still waiting to be explored. This is because there is a need for a new approach to spaceflight instrumentation in order to make these mature sensor web technologies applicable for spaceflight. In this paper we present an approach in developing related and enabling spaceflight instrument-level technologies based on the new concept of a representative spaceflight Instrument Sensor Web (ISW).

Advanced ceramic matrix composite materials for current and future propulsion technology applications

NASA Astrophysics Data System (ADS)

Schmidt, S.; Beyer, S.; Knabe, H.; Immich, H.; Meistring, R.; Gessler, A.

2004-08-01

Current rocket engines, due to their method of construction, the materials used and the extreme loads to which they are subjected, feature a limited number of load cycles. Various technology programmes in Europe are concerned, besides developing reliable and rugged, low cost, throwaway equipment, with preparing for future reusable propulsion technologies. One of the key roles for realizing reusable engine components is the use of modern and innovative materials. One of the key technologies which concern various engine manufacturers worldwide is the development of fibre-reinforced ceramics—ceramic matrix composites. The advantages for the developers are obvious—the low specific weight, the high specific strength over a large temperature range, and their great damage tolerance compared to monolithic ceramics make this material class extremely interesting as a construction material. Over the past years, the Astrium company (formerly DASA) has, together with various partners, worked intensively on developing components for hypersonic engines and liquid rocket propulsion systems. In the year 2000, various hot-firing tests with subscale (scale 1:5) and full-scale nozzle extensions were conducted. In this year, a further decisive milestone was achieved in the sector of small thrusters, and long-term tests served to demonstrate the extraordinary stability of the C/SiC material. Besides developing and testing radiation-cooled nozzle components and small-thruster combustion chambers, Astrium worked on the preliminary development of actively cooled structures for future reusable propulsion systems. In order to get one step nearer to this objective, the development of a new fibre composite was commenced within the framework of a regionally sponsored programme. The objective here is to create multidirectional (3D) textile structures combined with a cost-effective infiltration process. Besides material and process development, the project also encompasses the development of special metal/ceramic and ceramic/ceramic joining techniques as well as studying and verifying non destructive investigation processes for the purpose of testing components.

Modernization of B-2 Data, Video, and Control Systems Infrastructure

NASA Technical Reports Server (NTRS)

Cmar, Mark D.; Maloney, Christian T.; Butala, Vishal D.

2012-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) Plum Brook Station (PBS) Spacecraft Propulsion Research Facility, commonly referred to as B-2, is NASA s third largest thermal-vacuum facility with propellant systems capability. B-2 has completed a modernization effort of its facility legacy data, video and control systems infrastructure to accommodate modern integrated testing and Information Technology (IT) Security requirements. Integrated systems tests have been conducted to demonstrate the new data, video and control systems functionality and capability. Discrete analog signal conditioners have been replaced by new programmable, signal processing hardware that is integrated with the data system. This integration supports automated calibration and verification of the analog subsystem. Modern measurement systems analysis (MSA) tools are being developed to help verify system health and measurement integrity. Legacy hard wired digital data systems have been replaced by distributed Fibre Channel (FC) network connected digitizers where high speed sampling rates have increased to 256,000 samples per second. Several analog video cameras have been replaced by digital image and storage systems. Hard-wired analog control systems have been replaced by Programmable Logic Controllers (PLC), fiber optic networks (FON) infrastructure and human machine interface (HMI) operator screens. New modern IT Security procedures and schemes have been employed to control data access and process control flows. Due to the nature of testing possible at B-2, flexibility and configurability of systems has been central to the architecture during modernization.

Modernization of B-2 Data, Video, and Control Systems Infrastructure

NASA Technical Reports Server (NTRS)

Cmar, Mark D.; Maloney, Christian T.; Butala, Vishal D.

2012-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) Plum Brook Station (PBS) Spacecraft Propulsion Research Facility, commonly referred to as B-2, is NASA's third largest thermal-vacuum facility with propellant systems capability. B-2 has completed a modernization effort of its facility legacy data, video and control systems infrastructure to accommodate modern integrated testing and Information Technology (IT) Security requirements. Integrated systems tests have been conducted to demonstrate the new data, video and control systems functionality and capability. Discrete analog signal conditioners have been replaced by new programmable, signal processing hardware that is integrated with the data system. This integration supports automated calibration and verification of the analog subsystem. Modern measurement systems analysis (MSA) tools are being developed to help verify system health and measurement integrity. Legacy hard wired digital data systems have been replaced by distributed Fibre Channel (FC) network connected digitizers where high speed sampling rates have increased to 256,000 samples per second. Several analog video cameras have been replaced by digital image and storage systems. Hard-wired analog control systems have been replaced by Programmable Logic Controllers (PLC), fiber optic networks (FON) infrastructure and human machine interface (HMI) operator screens. New modern IT Security procedures and schemes have been employed to control data access and process control flows. Due to the nature of testing possible at B-2, flexibility and configurability of systems has been central to the architecture during modernization.

Effectiveness of biplane angiography compared to monoplane angiography for vascular neuro-interventions: a systematic review of the literature.

PubMed

Bellemare, C A; Poder, T G

2017-07-01

To compare biplane technology to monoplane technology for vascular neuro-intervention. A systematic review of the literature in MEDLINE (via PubMed), Scopus, and ScienceDirect was conducted without date or language restrictions. The Downs and Black quality-assessment checklist was used. The findings of this systematic review were combined with local and Canadian data. The nine articles selected for analysis had a very low level of evidence. The studies report that the biplane system appears to reduce ionising radiation and medical complications as well as shorten procedure time. Most major hospitals in Canada use the biplane system. The biplane system could improve the operator's confidence, which could translate into reduced risk, especially for more complex procedures. The superiority of the biplane system cannot be scientifically proven based on the data in the literature. Nevertheless, given the advantages that a biplane system can provide in terms of safety, quality of care, support to university teaching programmes based on best practices, enhanced capability in performing complex procedures, this technology should be implemented with a responsibility to collect outcome data to optimise the clinical protocol regarding the dose of ionising radiation delivered. Copyright © 2017 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

High-Tech Opens Doors.

ERIC Educational Resources Information Center

Eichleay, Kristen; Pressman, Harvey

1987-01-01

Exemplary projects which help disabled people use technology (particularly computers) expand their employment opportunities include: Project Entry (Seattle); Georgia Computer Programmer Project (Atlanta); Perkins Project with Industry (Watertown, Massachusetts); Project Byte (Newton Massachusetts); Technology Relevant to You (St. Louis); Special…

The Concert system - Compiler and runtime technology for efficient concurrent object-oriented programming

NASA Technical Reports Server (NTRS)

Chien, Andrew A.; Karamcheti, Vijay; Plevyak, John; Sahrawat, Deepak

1993-01-01

Concurrent object-oriented languages, particularly fine-grained approaches, reduce the difficulty of large scale concurrent programming by providing modularity through encapsulation while exposing large degrees of concurrency. Despite these programmability advantages, such languages have historically suffered from poor efficiency. This paper describes the Concert project whose goal is to develop portable, efficient implementations of fine-grained concurrent object-oriented languages. Our approach incorporates aggressive program analysis and program transformation with careful information management at every stage from the compiler to the runtime system. The paper discusses the basic elements of the Concert approach along with a description of the potential payoffs. Initial performance results and specific plans for system development are also detailed.

An FPGA-Based Test-Bed for Reliability and Endurance Characterization of Non-Volatile Memory

NASA Technical Reports Server (NTRS)

Rao, Vikram; Patel, Jagdish; Patel, Janak; Namkung, Jeffrey

2001-01-01

Memory technologies are divided into two categories. The first category, nonvolatile memories, are traditionally used in read-only or read-mostly applications because of limited write endurance and slow write speed. These memories are derivatives of read only memory (ROM) technology, which includes erasable programmable ROM (EPROM), electrically-erasable programmable ROM (EEPROM), Flash, and more recent ferroelectric non-volatile memory technology. Nonvolatile memories are able to retain data in the absence of power. The second category, volatile memories, are random access memory (RAM) devices including SRAM and DRAM. Writing to these memories is fast and write endurance is unlimited, so they are most often used to store data that change frequently, but they cannot store data in the absence of power. Nonvolatile memory technologies with better future potential are FRAM, Chalcogenide, GMRAM, Tunneling MRAM, and Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) EEPROM.

Implementing large-scale programmes to optimise the health workforce in low- and middle-income settings: a multicountry case study synthesis.

PubMed

Gopinathan, Unni; Lewin, Simon; Glenton, Claire

2014-12-01

To identify factors affecting the implementation of large-scale programmes to optimise the health workforce in low- and middle-income countries. We conducted a multicountry case study synthesis. Eligible programmes were identified through consultation with experts and using Internet searches. Programmes were selected purposively to match the inclusion criteria. Programme documents were gathered via Google Scholar and PubMed and from key informants. The SURE Framework - a comprehensive list of factors that may influence the implementation of health system interventions - was used to organise the data. Thematic analysis was used to identify the key issues that emerged from the case studies. Programmes from Brazil, Ethiopia, India, Iran, Malawi, Venezuela and Zimbabwe were selected. Key system-level factors affecting the implementation of the programmes were related to health worker training and continuing education, management and programme support structures, the organisation and delivery of services, community participation, and the sociopolitical environment. Existing weaknesses in health systems may undermine the implementation of large-scale programmes to optimise the health workforce. Changes in the roles and responsibilities of cadres may also, in turn, impact the health system throughout. © 2014 John Wiley & Sons Ltd.

Radiation-Hardened Circuitry Using Mask-Programmable Analog Arrays. Report 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Britton, Jr, Charles L.; Shelton, Jacob H.; Ericson, Milton Nance

As the recent accident at Fukushima Daiichi so vividly demonstrated, telerobotic technologies capable of withstanding high radiation environments need to be readily available to enable operations, repair, and recovery under severe accident scenarios when human entry is extremely dangerous or not possible. Telerobotic technologies that enable remote operation in high dose rate environments have undergone revolutionary improvement over the past few decades. However, much of this technology cannot be employed in nuclear power environments because of the radiation sensitivity of the electronics and the organic insulator materials currently in use. This is a report of the activities involving Task 3more » of the Nuclear Energy Enabling Technologies (NEET) 2 project Radiation Hardened Circuitry Using Mask-Programmable Analog Arrays [1]. Evaluation of the performance of the system for both pre- and post-irradiation as well as operation at elevated temperature will be performed. Detailed performance of the system will be documented to ensure the design meets requirements prior to any extended evaluation. A suite of tests will be developed which will allow evaluation before and after irradiation and during temperature. Selection of the radiation exposure facilities will be determined in the early phase of the project. Radiation exposure will consist of total integrated dose (TID) up to 200 kRad or above with several intermediate doses during test. Dose rates will be in various ranges determined by the facility that will be used with a target of 30 kRad/hr. Many samples of the pre-commercial devices to be used will have been tested in previous projects to doses of at least 300 kRad and temperatures up to 125C. The complete systems will therefore be tested for performance at intermediate doses. Extended temperature testing will be performed up to the limit of the commercial sensors. The test suite performed at each test point will consist of operational testing of the three basic measurement functions plus electronic functional testing (power dissipation, voltage offset changes, noise variations, etc.). This suite will be developed as part of this task.« less

Integrating national community-based health worker programmes into health systems: a systematic review identifying lessons learned from low-and middle-income countries.

PubMed

Zulu, Joseph Mumba; Kinsman, John; Michelo, Charles; Hurtig, Anna-Karin

2014-09-22

Despite the development of national community-based health worker (CBHW) programmes in several low- and middle-income countries, their integration into health systems has not been optimal. Studies have been conducted to investigate the factors influencing the integration processes, but systematic reviews to provide a more comprehensive understanding are lacking. We conducted a systematic review of published research to understand factors that may influence the integration of national CBHW programmes into health systems in low- and middle-income countries. To be included in the study, CBHW programmes should have been developed by the government and have standardised training, supervision and incentive structures. A conceptual framework on the integration of health innovations into health systems guided the review. We identified 3410 records, of which 36 were finally selected, and on which an analysis was conducted concerning the themes and pathways associated with different factors that may influence the integration process. Four programmes from Brazil, Ethiopia, India and Pakistan met the inclusion criteria. Different aspects of each of these programmes were integrated in different ways into their respective health systems. Factors that facilitated the integration process included the magnitude of countries' human resources for health problems and the associated discourses about how to address these problems; the perceived relative advantage of national CBHWs with regard to delivering health services over training and retaining highly skilled health workers; and the participation of some politicians and community members in programme processes, with the result that they viewed the programmes as legitimate, credible and relevant. Finally, integration of programmes within the existing health systems enhanced programme compatibility with the health systems' governance, financing and training functions. Factors that inhibited the integration process included a rapid scale-up process; resistance from other health workers; discrimination of CBHWs based on social, gender and economic status; ineffective incentive structures; inadequate infrastructure and supplies; and hierarchical and parallel communication structures. CBHW programmes should design their scale-up strategy differently based on current contextual factors. Further, adoption of a stepwise approach to the scale-up and integration process may positively shape the integration process of CBHW programmes into health systems.

Using Self-Determination Theory to build communities of support to aid in the retention of women in engineering

NASA Astrophysics Data System (ADS)

Dell, Elizabeth M.; Verhoeven, Yen; Christman, Jeanne W.; Garrick, Robert D.

2018-05-01

Diverse perspectives are required to address the technological problems facing our world. Although women perform as well as their male counterparts in math and science prior to entering college, the numbers of women students entering and completing engineering programmes are far below their representation in the workforce. This paper reports on a qualitative, multiyear study of the experiences of women students in an Engineering Technology programme. The project addressed some of the unique, fundamental challenges that female students face within their programmes, and the authors describe a programmatic framework based on Self-Determination Theory as an intervention for the recruitment and retention of female engineering students. Data from focus groups and interviews show how students were supported in their undergraduate experiences and how inclusive learning environments are needed to further improve outcomes. Conceptual issues and methodological considerations of our outcomes are presented.

Developing INFOMAR's Seabed Mapping Data to Support a Sustainable Marine Economy

NASA Astrophysics Data System (ADS)

Judge, M. T.; Guinan, J.

2016-02-01

As Ireland's national seabed mapping programme, INFOMAR1 (INtegrated mapping FOr the sustainable development of Ireland's MARine resource) enters its eleventh year it continues to provide pivotal seabed mapping data products, e.g. databases, charts and physical habitat maps to support Ireland's Integrated Marine Plan. The programme, jointly coordinated by the Geological Survey of Ireland and the Marine Institute, has gained a world class reputation for developing seabed mapping technologies, infrastructure and expertise. In the government's current Integrated Marine Plan, the programme's critical role in marine spatial planning enabling infrastructural development, research and education has been cited2. INFOMAR's free data policy supports a thriving maritime economy by promoting easy access to seabed mapping datasets that underpin; maritime safety, security and surveillance, governance, business development, research and technology innovation and infrastructure. The first hydrographic surveys of the national marine mapping programme mapped the extent of Ireland's deepest offshore area, whilst in recent years the focus has been to map the coastal and shallow areas. Targeted coastal areas include 26 bays and 3 priority areas for which specialised equipment, techniques and vessels are required. This talk will discuss how the INFOMAR programme has evolved to address the scientific and technological challenges of seabed mapping across a range of water depths; particularly the challenges associated with addressing inshore data gaps. It will describe how the data converts to bathymetric and geological maps detailing seabed characteristics and habitats. We will expand on how maps are: incorporated into collaborative marine projects such as EMODnet, commercialised to identify marine resources and used as marine decision support tools that drive policy and promote protection of the vastly under discovered marine area.

Biometrics-based service marketing issues: exploring acceptability and risk factors of iris scans associated with registered travel programmes.

PubMed

Smith, Alan D

2008-01-01

The marketability and viability of biometric technologies by companies marketing their own versions of pre-approved registered travel programmes have generated a number of controversies. Data were collected and analysed to formulate graphs, run regression and correlation analyses, and use Chi-square to formally test basic research propositions on a sample of 241 professionals in the Pittsburgh area. It was found that there was a significant relationship between the respondents' familiarity with new technology (namely web-enabled and internet sophistication) and knowledge of biometrics, in particular iris scans. Participants who frequently use the internet are more comfortable with innovative technology; although individuals with higher income levels have less trust in the government, it appeared that virtually everyone is concerned about trusting the government with their personal information. Healthcare professionals need to document the safety, CRM-related factors, and provide leadership in the international collaboration of biometric-related personal identification technologies, since they will be one of the main beneficiaries of the implementation of such technologies.

TT2014 meeting report on the 12th Transgenic Technology meeting in Edinburgh: new era of transgenic technologies with programmable nucleases in the foreground.

PubMed

Beck, Inken M; Sedlacek, Radislav

2015-02-01

The 12th Transgenic Technology meeting was held in Edinburgh on 6th-8th October 2014 and interest to participate in the meeting overcame all expectations. The TT2014 was the largest meeting ever with more than 540 scientists, technicians, and students from all over the world. The meeting had an excellent scientific program that brought information on the latest ground-breaking technologies for gene targeting and genome editing using programmable nucleases into the foreground. These presentations were well balanced with several highlights over viewing topics in embryonic stem cell research, embryogenesis, disease models, and animals in agriculture. Ample space was reserved also for short talks presenting technical development and for highlighting posters contributions. A highlight of the meeting was the award of the 10th International Society of Transgenic Technologies Prize to Janet Rossant for her outstanding contributions in the field of mouse embryogenesis.

SAD-Based Stereo Vision Machine on a System-on-Programmable-Chip (SoPC)

PubMed Central

Zhang, Xiang; Chen, Zhangwei

2013-01-01

This paper, proposes a novel solution for a stereo vision machine based on the System-on-Programmable-Chip (SoPC) architecture. The SOPC technology provides great convenience for accessing many hardware devices such as DDRII, SSRAM, Flash, etc., by IP reuse. The system hardware is implemented in a single FPGA chip involving a 32-bit Nios II microprocessor, which is a configurable soft IP core in charge of managing the image buffer and users' configuration data. The Sum of Absolute Differences (SAD) algorithm is used for dense disparity map computation. The circuits of the algorithmic module are modeled by the Matlab-based DSP Builder. With a set of configuration interfaces, the machine can process many different sizes of stereo pair images. The maximum image size is up to 512 K pixels. This machine is designed to focus on real time stereo vision applications. The stereo vision machine offers good performance and high efficiency in real time. Considering a hardware FPGA clock of 90 MHz, 23 frames of 640 × 480 disparity maps can be obtained in one second with 5 × 5 matching window and maximum 64 disparity pixels. PMID:23459385

20-GFLOPS QR processor on a Xilinx Virtex-E FPGA

NASA Astrophysics Data System (ADS)

Walke, Richard L.; Smith, Robert W. M.; Lightbody, Gaye

2000-11-01

Adaptive beamforming can play an important role in sensor array systems in countering directional interference. In high-sample rate systems, such as radar and comms, the calculation of adaptive weights is a very computational task that requires highly parallel solutions. For systems where low power consumption and volume are important the only viable implementation is as an Application Specific Integrated Circuit (ASIC). However, the rapid advancement of Field Programmable Gate Array (FPGA) technology is enabling highly credible re-programmable solutions. In this paper we present the implementation of a scalable linear array processor for weight calculation using QR decomposition. We employ floating-point arithmetic with mantissa size optimized to the target application to minimize component size, and implement them as relationally placed macros (RPMs) on Xilinx Virtex FPGAs to achieve predictable dense layout and high-speed operation. We present results that show that 20GFLOPS of sustained computation on a single XCV3200E-8 Virtex-E FPGA is possible. We also describe the parameterized implementation of the floating-point operators and QR-processor, and the design methodology that enables us to rapidly generate complex FPGA implementations using the industry standard hardware description language VHDL.

Benefits of ESA Gravity-Related Hands-on Programmes for University Students' Careers

NASA Astrophysics Data System (ADS)

Callens, Natacha; Ha, Lily; Galeone, Piero

2016-10-01

The Education Office of the European Space Agency (ESA) offers university students, from ESA Member and Cooperating States, the opportunity to perform investigations in physical sciences, life sciences, and technology, under different gravity conditions through three educational programmes. The "Fly Your Thesis!" (FYT) programme makes use of parabolic flights and the "Drop Your Thesis!" (DYT) programme utilizes a drop tower as microgravity carriers, while the "Spin Your Thesis!" (SYT) programme uses a large centrifuge to create hypergravity. To date, more than hundred university students had the chance to participate in the design, development, and performance of one or more experiments during dedicated campaigns. In the following paper, we examine demographics of past participants of the ESA Education Office gravity-related opportunities over the past seven years and evaluate the benefits of these educational programmes for the participants' studies and careers. Student teams that participated in one of the programmes between 2009 and 2013 were contacted to fill in a questionnaire. The feedback from the students demonstrate significant benefits extending far beyond the primary educational objectives of these programmes.

Evaluating the Level of Degree Programmes in Higher Education: Conceptual Design

ERIC Educational Resources Information Center

Rexwinkel, Trudy; Haenen, Jacques; Pilot, Albert

2013-01-01

Evaluating the level of degree programmes became crucial with the Bologna Agreement in 1999 when European ministers agreed to implement common bachelor's and master's degree programmes and a common system of quality assurance. The European Quality Assurance system demands evaluation of the degree programme level based on valid and reliable…

Improving Educational Objectives of the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and…

Teaching smartphone and microcontroller systems using "Android Java"

NASA Astrophysics Data System (ADS)

Tigrek, Seyitriza

Mobile devices are becoming indispensable tools for many students and educators. Mobile technology is starting a new era in the computing methodologies in many engineering disciplines and laboratories. Microcontroller extension that communicates with mobile devices will take the data acquisition and control process into a new level in the sensing technology and communication. The purpose of this thesis is to develop a framework to incorporate the new mobile platform with robust embedded systems into the engineering curriculum. For this purpose a course material is developed "Introduction to Programming Java on a Mobile Platform" to teach novice programmers how to create applications, specifically on Android. Combining an introductory level programming class with the Android platform can appeal to non-programming individuals in multiple disciplines. The proposed course curriculum reduces the learning time, and allows senior engineering students to use the new framework for their specific needs in the labs such as mobile data acquisition and control projects. This work provides techniques for instructors with modest programming background to teach cutting edge technology, which is smartphone programming. Techniques developed in this work minimize unnecessary information carried into current teaching approaches with hands-on practice. It also helps the students with minimal background requirements overcome the barriers that have evolved around computer programming. The motivation of this thesis is to create a tailored programming introductory course to teach Java programming on Android by incorporating selected efficient methods from extant literature. The mechanism proposed in this thesis is to keep students motivated by an active approach based on student-centered learning with collaborative work. Teamwork through pair programming is adapted in this teaching process. Bloom's taxonomy, along with a knowledge survey, is used as a guide to classify the information and exercise problems. A prototype curriculum is a deliverable of this research that is suitable for novice programmers-such as engineering freshmen students. It also contains advanced material that allows senior students to use mobile phone and a microcontroller system to enhance engineering laboratories.

Techniques for the rapid display and manipulation of 3-D biomedical data.

PubMed

Goldwasser, S M; Reynolds, R A; Talton, D A; Walsh, E S

1988-01-01

The use of fully interactive 3-D workstations with true real-time performance will become increasingly common as technology matures and economical commercial systems become available. This paper provides a comprehensive introduction to high speed approaches to the display and manipulation of 3-D medical objects obtained from tomographic data acquisition systems such as CT, MR, and PET. A variety of techniques are outlined including the use of software on conventional minicomputers, hardware assist devices such as array processors and programmable frame buffers, and special purpose computer architecture for dedicated high performance systems. While both algorithms and architectures are addressed, the major theme centers around the utilization of hardware-based approaches including parallel processors for the implementation of true real-time systems.

Optical CDMA components requirements

NASA Astrophysics Data System (ADS)

Chan, James K.

1998-08-01

Optical CDMA is a complementary multiple access technology to WDMA. Optical CDMA potentially provides a large number of virtual optical channels for IXC, LEC and CLEC or supports a large number of high-speed users in LAN. In a network, it provides asynchronous, multi-rate, multi-user communication with network scalability, re-configurability (bandwidth on demand), and network security (provided by inherent CDMA coding). However, optical CDMA technology is less mature in comparison to WDMA. The components requirements are also different from WDMA. We have demonstrated a video transport/switching system over a distance of 40 Km using discrete optical components in our laboratory. We are currently pursuing PIC implementation. In this paper, we will describe the optical CDMA concept/features, the demonstration system, and the requirements of some critical optical components such as broadband optical source, broadband optical amplifier, spectral spreading/de- spreading, and fixed/programmable mask.

A low power low noise analog front end for portable healthcare system

NASA Astrophysics Data System (ADS)

Yanchao, Wang; Keren, Ke; Wenhui, Qin; Yajie, Qin; Ting, Yi; Zhiliang, Hong

2015-10-01

The presented analog front end (AFE) used to process human bio-signals consists of chopping instrument amplifier (IA), chopping spikes filter and programmable gain and bandwidth amplifier. The capacitor-coupling input of AFE can reject the DC electrode offset. The power consumption of current-feedback based IA is reduced by adopting capacitor divider in the input and feedback network. Besides, IA's input thermal noise is decreased by utilizing complementary CMOS input pairs which can offer higher transconductance. Fabricated in Global Foundry 0.35 μm CMOS technology, the chip consumes 3.96 μA from 3.3 V supply. The measured input noise is 0.85 μVrms (0.5-100 Hz) and the achieved noise efficient factor is 6.48. Project supported by the Science and Technology Commission of Shanghai Municipality (No. 13511501100), the State Key Laboratory Project of China (No. 11MS002), and the State Key Laboratory of ASIC & System, Fudan University.

Distributive, Non-destructive Real-time System and Method for Snowpack Monitoring

NASA Technical Reports Server (NTRS)

Frolik, Jeff (Inventor); Skalka, Christian (Inventor)

2013-01-01

A ground-based system that provides quasi real-time measurement and collection of snow-water equivalent (SWE) data in remote settings is provided. The disclosed invention is significantly less expensive and easier to deploy than current methods and less susceptible to terrain and snow bridging effects. Embodiments of the invention include remote data recovery solutions. Compared to current infrastructure using existing SWE technology, the disclosed invention allows more SWE sites to be installed for similar cost and effort, in a greater variety of terrain; thus, enabling data collection at improved spatial resolutions. The invention integrates a novel computational architecture with new sensor technologies. The invention's computational architecture is based on wireless sensor networks, comprised of programmable, low-cost, low-powered nodes capable of sophisticated sensor control and remote data communication. The invention also includes measuring attenuation of electromagnetic radiation, an approach that is immune to snow bridging and significantly reduces sensor footprints.

The telecommunications programme of the European Space Agency

NASA Astrophysics Data System (ADS)

Collette, R. C. L.; Ashford, E. W.

An overview of the long-term telecommunications program of the ESA approved in November 1992 is presented. The project involves the Data Relay and Technology Mission (DRTM) program, and the Advanced Research in Telecommunications Systems (ARTES) program. The DRTM program contains both ARTEMIS and the operational DRS satellites, together with their corresponding earth segment elements required for satellite checkout, control and operation. ARTES is designed to group together all ongoing and future ESA telecommunications programs, with the exception of DRTM, into one large legal and financial framework. It will incorporate all running and planned activities in the present Payload and Spacecraft Development and Experimentation program, together with activities that would otherwise have been carried out as part of the Advanced Systems and Technology program. ARTES goals are: promotion of new and improved satellite communications services, cooperation with operating entities, improvements in the competitiveness of industry, and international cooperation.

Field-programmable gate array implementation of an all-digital IEEE 802.15.4-compliant transceiver

NASA Astrophysics Data System (ADS)

Cornetta, Gianluca; Touhafi, Abdellah; Santos, David J.; Vázquez, José M.

2010-12-01

An architecture for a low-cost, low-complexity digital transceiver is presented in this article. The proposed architecture targets the IEEE 802.15.4 standard for short-range wireless personal area networks and has been implemented as a synthesisable VHDL register transfer level description. The system has been evaluated and tested using a Xilinx 90 nm Virtex-4 field-programmable gate array as the target technology. Bit error rate (BER) and error vector magnitude (EVM) have been used as the figures of merit for modem performance. Simulations show that the recommended minimum BER is achieved at E b/N 0 = 8.7 dB, whereas the EVM is 19.5%. The implemented device occupies 10% of the target FPGA and has a normalised maximum power consumption of 44 mW in transmit mode and 53 mW in receiver mode.

The Role of the United Nations Committee on the Peaceful Uses of Outer Space in Building Capacity

NASA Astrophysics Data System (ADS)

Haubold, Hans

The Office for Outer Space Affairs (OOSA) will provide an overview of achievements of UN- COPUOS, UNISPACE Conferences, particularly the establishment of the Programme on Space Applications and its priority thematic areas, UN-affiliated Regional Centres for Space Science and Technology Education, the International Committee on Global Navigation Satellite Systems (ICG), the UN Platform for Space-based Information for Disaster Management and Emergency Response (UN-Spider), and legal framework governing space activities of UN Member States. OOSA will review results of the United Nations Basic Space Science Initiative, particularly the development of networks of astronomical telescope facilities, planetariums, and instrument arrays for space research in developing nations. The mission of OOSA, implemented through on-going programmes developed for the International Heliophysical Year 2007 (IHY2007) and the International Year of Astronomy 2009 (IYA2009) will be highlighted.

[Hardware Implementation of Numerical Simulation Function of Hodgkin-Huxley Model Neurons Action Potential Based on Field Programmable Gate Array].

PubMed

Wang, Jinlong; Lu, Mai; Hu, Yanwen; Chen, Xiaoqiang; Pan, Qiangqiang

2015-12-01

Neuron is the basic unit of the biological neural system. The Hodgkin-Huxley (HH) model is one of the most realistic neuron models on the electrophysiological characteristic description of neuron. Hardware implementation of neuron could provide new research ideas to clinical treatment of spinal cord injury, bionics and artificial intelligence. Based on the HH model neuron and the DSP Builder technology, in the present study, a single HH model neuron hardware implementation was completed in Field Programmable Gate Array (FPGA). The neuron implemented in FPGA was stimulated by different types of current, the action potential response characteristics were analyzed, and the correlation coefficient between numerical simulation result and hardware implementation result were calculated. The results showed that neuronal action potential response of FPGA was highly consistent with numerical simulation result. This work lays the foundation for hardware implementation of neural network.

Assessment of Student Learning: The Experience of Two European Institutions where Outcomes-Based Assessment Has Been Implemented

ERIC Educational Resources Information Center

Dodridge, Melvyn; Kassinopoulos, Marios

2003-01-01

The programmes offered by both institutions are geared to the application of current technology. All the University of Derby programmes, including the BSc(Hons) degree in Electrical and Electronic Engineering and the Higher Technical Institute Diploma in Electrical Engineering, are accredited in the UK at Incorporated Engineer level by the…

Increasing Capacity in STEM Education Research: A Study Exploring the Potential for a Fellowship Programme

ERIC Educational Resources Information Center

Halsey, Karen; Harland, Jennie; Springate, Iain

2007-01-01

The National Foundation for Educational Research (NFER) was commissioned by the Royal Society to complete a study exploring the potential of a Fellowship programme for early- to mid-career education researchers in STEM (Science, Technology, Engineering and Mathematics). The study was set within the broader context of increasing capacity in STEM …